Pharmaceutical powder compaction technology

National Research Council Canada - National Science Library

Çelik, Metin

2011-01-01

"Revised to reflect modern pharmaceutical compacting techniques, this Second Edition guides pharmaceutical engineers, formulation scientists, and product development and quality assurance personnel...

Emerging technology: A key enabler for modernizing pharmaceutical manufacturing and advancing product quality.

Science.gov (United States)

O'Connor, Thomas F; Yu, Lawrence X; Lee, Sau L

2016-07-25

Issues in product quality have produced recalls and caused drug shortages in United States (U.S.) in the past few years. These quality issues were often due to outdated manufacturing technologies and equipment as well as lack of an effective quality management system. To ensure consistent supply of safe, effective and high-quality drug products available to the patients, the U.S. Food and Drug Administration (FDA) supports modernizing pharmaceutical manufacturing for improvements in product quality. Specifically, five new initiatives are proposed here to achieve this goal. They include: (i) advancing regulatory science for pharmaceutical manufacturing; (ii) establishing a public-private institute for pharmaceutical manufacturing innovation; (iii) creating incentives for investment in the technological upgrade of manufacturing processes and facilities; (iv) leveraging external expertise for regulatory quality assessment of emerging technologies; and (v) promoting the international harmonization of approaches for expediting the global adoption of emerging technologies. Published by Elsevier B.V.

[Application of microwave irradiation technology to the field of pharmaceutics].

Science.gov (United States)

Zhang, Xue-Bing; Shi, Nian-Qiu; Yang, Zhi-Qiang; Wang, Xing-Lin

2014-03-01

Microwaves can be directly transformed into heat inside materials because of their ability of penetrating into any substance. The degree that materials are heated depends on their dielectric properties. Materials with high dielectric loss are more easily to reach a resonant state by microwaves field, then microwaves can be absorbed efficiently. Microwave irradiation technique with the unique heating mechanisms could induce drug-polymer interaction and change the properties of dissolution. Many benefits such as improving product quality, increasing energy efficiency and reducing times can be obtained by microwaves. This paper summarized characteristics of the microwave irradiation technique, new preparation techniques and formulation process in pharmaceutical industry by microwave irradiation technology. The microwave technology provides a new clue for heating and drying in the field of pharmaceutics.

Reimbursement of pharmaceuticals: Reference pricing versus health technology assessment

NARCIS (Netherlands)

M. Drummond (Michael); B. Jönsson (Bengt); F.F.H. Rutten (Frans); T. Stargardt (Tom)

2011-01-01

textabstractReference pricing and health technology assessment are policies commonly applied in order to obtain more value for money from pharmaceuticals. This study focussed on decisions about the initial price and reimbursement status of innovative drugs and discussed the consequences for market

Reconfiguring global pharmaceutical value networks through targeted technology interventions

OpenAIRE

Harrington, Tomas Seosamh; Phillips, MA; Srai, Jagjit Singh

2016-01-01

Targeting a series of advanced manufacturing technology (AMT) ‘interventions’ provides the potential for significant step changes across the pharmaceutical value chain, from early stage ‘system discovery’ and clinical trials, through to novel service supply models. This research explores future value network configurations which, when aligned with disruptive shifts in technology (process and digital), may enable alternative routes to medicines production and the delivery of additional value t...

Development of Organizational Technologies for Pharmaceutical Care to Outpatients (on the Example of Diabetes Mellitus

Directory of Open Access Journals (Sweden)

A.D. Semionova

2014-11-01

Full Text Available Taking into account global trends in the development of healthcare, there were scientifically grounded conceptual model of pharmaceutical care to outpatients with diabetes mellitus and the integrated technology of managing processes of pharmaceutical care on the basis of personalization in pharmaceutical care, specialization of pharmacies, modeling procedures of information exchange between medical institutions and pharmacies, optimization of prescription and providing drugs, providing information and consulting services with the use of methods and means of modern information technologies, the development of step-by-step guides for the implementation of control technologies, the creation of a system of continuous professional education of pharmacy specialists in the field of diabetes mellitus.

Application of Emerging Pharmaceutical Technologies for Therapeutic Challenges of Space Exploration Missions

Science.gov (United States)

Putcha, Lakshmi

2011-01-01

An important requirement of therapeutics for extended duration exploration missions beyond low Earth orbit will be the development of pharmaceutical technologies suitable for sustained and preventive health care in remote and adverse environmental conditions. Availability of sustained, stable and targeted delivery pharmaceuticals for preventive health of major organ systems including gastrointestinal, hepato-renal, musculo-skeletal and immune function are essential to offset adverse effects of space environment beyond low Earth orbit. Specifically, medical needs may include multi-drug combinations for hormone replacement, radiation protection, immune enhancement and organ function restoration. Additionally, extended stability of pharmaceuticals dispensed in space must be also considered in future drug development. Emerging technologies that can deliver stable and multi-therapy pharmaceutical preparations and delivery systems include nanotechnology based drug delivery platforms, targeted-delivery systems in non-oral and non-parenteral formulation matrices. Synthetic nanomaterials designed with molecular precision offer defined structures, electronics, and chemistries to be efficient drug carriers with clear advantages over conventional materials of drug delivery matricies. Nano-carrier materials like the bottle brush polymers may be suitable for systemic delivery of drug cocktails while Superparamagnetic Iron Oxide Nanoparticles or (SPIONS) have great potential to serve as carriers for targeted drug delivery to a specific site. These and other emerging concepts of drug delivery and extended shelf-life technologies will be reviewed in light of their application to address health-care challenges of exploration missions. Innovations in alternate treatments for sustained immune enhancement and infection control will be also discussed.

Membrane-Based Technologies in the Pharmaceutical Industry and Continuous Production of Polymer-Coated Crystals/Particles.

Science.gov (United States)

Chen, Dengyue; Sirkar, Kamalesh K; Jin, Chi; Singh, Dhananjay; Pfeffer, Robert

2017-01-01

Membrane technologies are of increasing importance in a variety of separation and purification applications involving liquid phases and gaseous mixtures. Although the most widely used applications at this time are in water treatment including desalination, there are many applications in chemical, food, healthcare, paper and petrochemical industries. This brief review is concerned with existing and emerging applications of various membrane technologies in the pharmaceutical and biopharmaceutical industry. The goal of this review article is to identify important membrane processes and techniques which are being used or proposed to be used in the pharmaceutical and biopharmaceutical operations. How novel membrane processes can be useful for delivery of crystalline/particulate drugs is also of interest. Membrane separation technologies are extensively used in downstream processes for bio-pharmaceutical separation and purification operations via microfiltration, ultrafiltration and diafiltration. Also the new technique of membrane chromatography allows efficient purification of monoclonal antibodies. Membrane filtration techniques of reverse osmosis and nanofiltration are being combined with bioreactors and advanced oxidation processes to treat wastewaters from pharmaceutical plants. Nanofiltration with organic solvent-stable membranes can implement solvent exchange and catalyst recovery during organic solvent-based drug synthesis of pharmaceutical compounds/intermediates. Membranes in the form of hollow fibers can be conveniently used to implement crystallization of pharmaceutical compounds. The novel crystallization methods of solid hollow fiber cooling crystallizer (SHFCC) and porous hollow fiber anti-solvent crystallization (PHFAC) are being developed to provide efficient methods for continuous production of polymer-coated drug crystals in the area of drug delivery. This brief review provides a general introduction to various applications of membrane technologies in

Application of the near-infrared spectroscopy in the pharmaceutical technology.

Science.gov (United States)

Jamrógiewicz, Marzena

2012-07-01

Near-infrared (NIR) spectroscopy is currently the fastest-growing and the most versatile analytical method not only in the pharmaceutical sciences but also in the industry. This review focuses on recent NIR applications in the pharmaceutical technology. This article covers monitoring, by NIR, of many manufacturing processes, such as granulation, mixing or drying, in order to determine the end-point of these processes. In this paper, apart from basic theoretical information concerning the NIR spectra, there are included determinations of the quality and quantity of pharmaceutical compounds. Some examples of measurements and control of physicochemical parameters of the final medicinal products, such as hardness, porosity, thickness size, compression strength, disintegration time and potential counterfeit are included. Biotechnology and plant drug analysis using NIR is also described. Moreover, some disadvantages of this method are stressed and future perspectives are anticipated. Copyright © 2012 Elsevier B.V. All rights reserved.

Pharmaceutical applications using NIR technology in the cloud

Science.gov (United States)

Grossmann, Luiz; Borges, Marco A.

2017-05-01

NIR technology has been available for a long time, certainly more than 50 years. Without any doubt, it has found many niche applications, especially in the pharmaceutical, food, agriculture and other industries due to its flexibility. There are a number of advantages over other existing analytical technologies we can list, for example virtually no need for sample preparation; usually NIR does not demand sample destruction and subsequent discard; NIR provides fast results; NIR does not require extensive operator training and carries small operating costs. However, the key point about NIR technology is the fact that it's more related to statistics than chemistry or, in other words, we are more concerned about analyzing and distinguishing features within the data than looking deep into the chemical entities themselves. A simple scan reading in the NIR range usually involves huge inflows of data points. Usually we decompose the signals into hundreds of predictor variables and use complex algorithms to predict classes or quantify specific content. NIR is all about math, especially by converting chemical information into numbers. Easier said than done. A NIR signal is a very complex one. Usually the signal responses are not specific to a particular material, rather, each grouṕs responses add up, thus providing low specificity of a spectral reading. This paper proposes a simple and efficient method to analyze and compare NIR spectra for the purpose of identifying the presence of active pharmaceutical ingredients in finished products using low cost NIR scanning devices connected to the internet cloud.

Remediation of water pollution caused by pharmaceutical residues based on electrochemical separation and degradation technologies: a review.

Science.gov (United States)

Sirés, Ignasi; Brillas, Enric

2012-04-01

In the last years, the decontamination and disinfection of waters by means of direct or integrated electrochemical processes are being considered as a very appealing alternative due to the significant improvement of the electrode materials and the coupling with low-cost renewable energy sources. Many electrochemical technologies are currently available for the remediation of waters contaminated by refractory organic pollutants such as pharmaceutical micropollutants, whose presence in the environment has become a matter of major concern. Recent reviews have focused on the removal of pharmaceutical residues upon the application of other important methods like ozonation and advanced oxidation processes. Here, we present an overview on the electrochemical methods devised for the treatment of pharmaceutical residues from both, synthetic solutions and real pharmaceutical wastewaters. Electrochemical separation technologies such as membrane technologies, electrocoagulation and internal micro-electrolysis, which only isolate the pollutants from water, are firstly introduced. The fundamentals and experimental set-ups involved in technologies that allow the degradation of pharmaceuticals, like anodic oxidation, electro-oxidation with active chlorine, electro-Fenton, photoelectro-Fenton and photoelectrocatalysis among others, are further discussed. Progress on the promising solar photoelectro-Fenton process devised and further developed in our laboratory is especially highlighted and documented. The abatement of total organic carbon or reduction of chemical oxygen demand from contaminated waters allows the comparison between the different methods and materials. The routes for the degradation of the some pharmaceuticals are also presented. Copyright © 2011 Elsevier Ltd. All rights reserved.

PNAUM: integrated approach to Pharmaceutical Services, Science, Technology and Innovation.

Science.gov (United States)

Gadelha, Carlos Augusto Grabois; Costa, Karen Sarmento; Nascimento, José Miguel do; Soeiro, Orlando Mário; Mengue, Sotero Serrate; Motta, Márcia Luz da; Carvalho, Antônio Carlos Campos de

2016-12-01

This paper describes the development process of the Pesquisa Nacional sobre Acesso, Utilização e Promoção do Uso Racional de Medicamentos (PNAUM - National Survey on Access, Use and Promotion of Rational Use of Medicines) based on an integrated approach to pharmaceutical services, science, technology and innovation. It starts by contextualizing health and development in Brazil and features elements of the National Policy for Science, Technology and Innovation in Health in Brazil and the National Policy for Pharmaceutical Services. On presenting pharmaceutical policy guidelines, it stresses the lack of nationwide data. This survey, commissioned by the Brazilian Ministry of Health, has two components: household survey and evaluation of pharmaceutical services in primary care. The findings point to perspectives that represent, besides the enhancement of public policy for pharmaceutical services and public health, results of government action aimed at developing the economic and industrial health care complex to improve the health conditions of the Brazilian population. RESUMO O artigo apresenta o processo de construção da Pesquisa Nacional sobre Acesso, Utilização e Promoção do Uso Racional de Medicamento a partir de uma concepção integradora da Assistência Farmacêutica, Ciência, Tecnologia e Inovação. Inicia-se contextualizando a saúde e o desenvolvimento no País e apresenta elementos da Política Nacional de Ciência Tecnologia e Inovação em Saúde no Brasil e da Política Nacional de Assistência Farmacêutica. Ao apresentar as diretrizes das Políticas Farmacêuticas, destaca-se a carência de dados de abrangência nacional. A presente pesquisa, encomendada pelo Ministério da Saúde, foi estruturada em dois componentes: inquérito domiciliar e avaliação dos serviços de assistência farmacêutica na atenção básica. As perspectivas dos resultados representam, além do incremento das políticas públicas farmacêuticas e de saúde p

The epiphany of data warehousing technologies in the pharmaceutical industry.

Science.gov (United States)

Barrett, J S; Koprowski, S P

2002-03-01

The highly competitive pharmaceutical industry has seen many external changes to its landscape as companies consume each other increasing their pipelines while removing redundant functions and processes. Internally, companies have sought to streamline the discovery and development phases in an attempt to improve candidate selection and reduce the time to regulatory filing. In conjunction with efforts to screen and develop more compounds faster and more efficiently, database management systems (DBMS) have been developed for numerous groups supporting various R&D efforts. An outgrowth of DBMS evolution has been the birth of data warehousing. Often confused with DBMS, data warehousing provides a conduit for data residing across platforms, networks, and in different data structures. Through the use of metadata, the warehouse establishes connectivity of varied data stores (operational detail data, ODD) and permits identification of data ownership, location and transaction history. This evolution has closely mirrored and in some ways been driven by the electronic submission (formerly CANDA). The integration of the electronic submissions and document management with R&D data warehousing initiatives should provide a platform by which companies can address compliance with 21 CFR Part 11. Now more than ever "corporate memory" is being extended to the data itself. The when, why and how of successes and failures are constantly being probed by R&D management teams. The volume of information being generated by today's pharmaceutical companies requires mining of historical data on a routine basis. Data warehousing represents a core technology to assist in this endeavor. New initiatives in this field address the necessity of data portals through which warehouse data can be web-enabled and exploited by diverse data customers both internal and external to the company. The epiphany of data warehousing technologies within the pharmaceutical industry has begun and promises to change

[Chinese medicine industry 4.0：advancing digital pharmaceutical manufacture toward intelligent pharmaceutical manufacture].

Science.gov (United States)

Cheng, Yi-Yu; Qu, Hai-Bin; Zhang, Bo-Li

2016-01-01

A perspective analysis on the technological innovation in pharmaceutical engineering of Chinese medicine unveils a vision on "Future Factory" of Chinese medicine industry in mind. The strategy as well as the technical roadmap of "Chinese medicine industry 4.0" is proposed, with the projection of related core technology system. It is clarified that the technical development path of Chinese medicine industry from digital manufacture to intelligent manufacture. On the basis of precisely defining technical terms such as process control, on-line detection and process quality monitoring for Chinese medicine manufacture, the technical concepts and characteristics of intelligent pharmaceutical manufacture as well as digital pharmaceutical manufacture are elaborated. Promoting wide applications of digital manufacturing technology of Chinese medicine is strongly recommended. Through completely informationized manufacturing processes and multi-discipline cluster innovation, intelligent manufacturing technology of Chinese medicine should be developed, which would provide a new driving force for Chinese medicine industry in technology upgrade, product quality enhancement and efficiency improvement. Copyright© by the Chinese Pharmaceutical Association.

Could the Pharmaceutical Industry Benefit from Full-Scale Adoption of Radio-Frequency Identification (RFID) Technology with New Regulations?

Science.gov (United States)

Coustasse, Alberto; Kimble, Craig A; Stanton, Robert B; Naylor, Mariah

2016-01-01

Healthcare regulators are directing attention to the pharmaceutical supply chain with the passage of the Drug Quality and Security Act (DQSA) and the Drug Supply Chain Security Act (DSCSA). Adoption of Radio-Frequency Identification (RFID) technology has the ability to improve compliance, reduce costs, and improve safety in the supply chain but its implementation has been limited; primarily because of hardware and tag costs. The purpose of this research study was to analyze the benefits to the pharmaceutical industry and healthcare system of the adoption of RFID technology as a result of newly implemented supply chain regulations. The methodology was a review following the steps of a systematic review with a total of 96 sources used. With the DSCSA, pharmaceutical companies must track and trace prescription drugs across the supply chain, and RFID can resolve many track-and-trace issues with manufacturer control of data. The practical implication of this study is that pharmaceutical companies must continue to have the potential to increase revenues, decrease associated costs, and increase compliance with new FDA regulations with RFID. Still, challenges related to regulatory statute wording, implementation of two-dimensional barcode technology, and the variety of interfaces within the pharmaceutical supply chain have delayed adoption and its full implementation.

The future of pharmaceutical manufacturing in the context of the scientific, social, technological and economic evolution.

Science.gov (United States)

Stegemann, Sven

2016-07-30

Healthcare provision is one of the import elements of modern societies. Life sciences and technology has made substantial progress over the past century and is continuing to evolve exponentially in many different areas. The use of genotypic and phenotypic information in drug discovery and drug therapy, the increasing wealth around the world, growing patient involvement through information and communication technology and finally innovations in pharmaceutical manufacturing technology are transforming the provision of healthcare. The adoption of this new science and technology is going to happen due to the synergistic effects and visible benefits for the society and healthcare systems. The different aspects driving advanced pharmaceutical manufacturing are reviewed to identify future research direction to assure overall acceptance and adoption into healthcare practice. Copyright © 2015 Elsevier B.V. All rights reserved.

[Health technology assessment and its impact on pharmaceutical pricing and reimbursement policies].

Science.gov (United States)

Castillo-Laborde, Carla; Silva-Illanes, Nicolás

2014-01-01

The article conceptualizes the pharmaceutical pricing and reimbursement policies related to financial coverage in the context of health systems. It introduces the pharmaceutical market as an imperfect one, in which appropriate regulation is required. Moreover, the basis that guide the pricing and reimbursement processes are defined and described in order to generate a categorization based on whether they are intended to assess the 'added value' and if the evaluation is based on cost-effectiveness criteria. This framework is used to review different types of these policies applied in the international context, discussing the role of the Health Technology Assessment in these processes. Finally, it briefly discusses the potential role of these types of policies in the Chilean context.

Health technology assessment of medicines in Greece: pharmaceutical industry executives' views.

Science.gov (United States)

Armataki, Eleni; Karampli, Eleftheria; Kyriopoulos, John; Pavi, Elpida

2014-04-01

The aim of this study was to investigate originator pharmaceutical companies' practices in relation to health technology assessment (HTA) and the views and perceptions of their executives on the importance of HTA in pricing and reimbursement of medicines in Greece. A qualitative study was performed, using individual semi-structured interviews based on an interview schedule with open-ended questions. The target population was market access departments' executives of originator pharmaceutical companies. Our target sample consisted of sixteen executives, of whom ten agreed to participate. Saturation point was reached after eight interviews. Data were audio recorded, transcribed verbatim, and analyzed using content analysis. Participants considered HTA as a very important complementary tool for decision making in health policy, particularly in the field of pharmaceuticals and medical devices. They believed that, in Greece, HTA could be institutionalized for the reimbursement mechanism of medicines under certain conditions relating to current health policy-making attitudes and conditions pertaining in the country. They considered that there are many constraints which must be overcome as well as opportunities to be exploited. Decisions in pharmaceutical policy should be scientifically substantiated and HTA should be institutionalized primarily for reimbursement decisions. Development of guidelines for conducting pharmaco-economic evaluation, change in health policy goals, recording of cost and epidemiological data, and broader participation of all stakeholders in HTA decision-making processes are suggested as prerequisites for a successful implementation of HTA in Greece.

PARTICULARITIES OF MODERN PHARMACEUTICAL PROMOTION

Directory of Open Access Journals (Sweden)

Юрий Владимирович Тарасов

2014-02-01

Full Text Available Pharmaceutical products market is one of the most saturated consumers’ markets. Characteristic features of it are: high competition, fierce struggle for the customer, specific technologies of promotion. In conditions of globalization and increase in competition both in world pharmaceutical market and in the market of medicines and goods of medical purpose in Russia modern marketing techniques of promotion of the products to the end consumers are the key tools for strengthening market positions – both of producers of pharmaceutical goods and their suppliers, distributors, big whole-sale companies. Among main tools of promotion are: advertising, public relations, stimulation of sales on the market of medicines, personal sales, computer technologies. The article describes different technologies of promotion of medicines: indoor-advertising, hot lines, pharmaceutical exhibitions, packing. DOI: http://dx.doi.org/10.12731/2218-7405-2013-12-1

Reimbursement of pharmaceuticals: reference pricing versus health technology assessment.

Science.gov (United States)

Drummond, Michael; Jönsson, Bengt; Rutten, Frans; Stargardt, Tom

2011-06-01

Reference pricing and health technology assessment are policies commonly applied in order to obtain more value for money from pharmaceuticals. This study focussed on decisions about the initial price and reimbursement status of innovative drugs and discussed the consequences for market access and cost. Four countries were studied: Germany, The Netherlands, Sweden and the United Kingdom. These countries have operated one, or both, of the two policies at certain points in time, sometimes in parallel. Drugs in four groups were considered: cholesterol-lowering agents, insulin analogues, biologic drugs for rheumatoid arthritis and "atypical" drugs for schizophrenia. Compared with HTA, reference pricing is a relatively blunt instrument for obtaining value for money from pharmaceuticals. Thus, its role in making reimbursement decisions should be limited to drugs which are therapeutically equivalent. HTA is a superior strategy for obtaining value for money because it addresses not only price but also the appropriate indications for the use of the drug and the relation between additional value and additional costs. However, given the relatively higher costs of conducting HTAs, the most efficient approach might be a combination of both policies.

The role of health technology assessment on pharmaceutical reimbursement in selected middle-income countries.

Science.gov (United States)

Oortwijn, Wija; Mathijssen, Judith; Banta, David

2010-05-01

Middle-income countries are often referred to as developing or emerging economies and face multiple challenges of severe financial stresses in their health care sectors, and high disease burden. The objective of this study is to provide an overview of how health technology assessment (HTA) is used and organized in selected middle-income countries and its role in the process of pharmaceutical coverage. We selected middle-income countries where HTA activities are evident: Argentina, Brazil, China, Colombia, Israel, Mexico, Philippines, Korea, Taiwan, Thailand, and Turkey. We collected and reviewed relevant information to describe the health care and reimbursement systems and how HTA relates to coverage decision-making of pharmaceuticals. This was supplemented by information from a structured survey among professionals working in public and private health insurance, industry, regulatory authorities, ministries of health, academic units or HTA. All countries require market authorization for pharmaceuticals to be sold and most countries have a national plan defining which pharmaceuticals can be reimbursed. However, the use of HTA in reimbursement decisions is still in its early stages with varying levels of HTA guidance implementation. The study provides evidence of the development of HTA in coverage decision-making in middle-income countries. Increased health care spending and the resulting access to modern technology give a strong impetus to HTA. However, HTA is developing with uneven speed in middle-income countries and many countries are building on the organisational and methodological experience from established HTA agencies. Copyright (c) 2010 Elsevier Ireland Ltd. All rights reserved.

Chemometrical aspects of quality in pharmaceutical technology : the application of robustness criteria and multi criteria decision making in optimization procedures for pharmaceutical formulations

NARCIS (Netherlands)

Boer, Jan Hendrik de

1992-01-01

In pharmaceutical technology one is often engaged with the design and analysis of formulations. A formulation of a solid dosage form is normally a mixture of components. This formulation usually consists of a number of components with fixed concentrations like the the medicinal substance(s) (drug),

Elimination of pharmaceutical residues in biologically pre-treated hospital wastewater using advanced UV irradiation technology: A comparative assessment

Energy Technology Data Exchange (ETDEWEB)

Koehler, C., E-mail: christian.koehler@tudor.lu [Public Research Centre Henri Tudor/Resource Centre for Environmental Technologies, 66 rue de Luxembourg, BP 144, L-4002 Esch-sur-Alzette (Luxembourg); Venditti, S.; Igos, E.; Klepiszewski, K.; Benetto, E.; Cornelissen, A. [Public Research Centre Henri Tudor/Resource Centre for Environmental Technologies, 66 rue de Luxembourg, BP 144, L-4002 Esch-sur-Alzette (Luxembourg)

2012-11-15

UV irradiation technology as a membrane bioreactor (MBR) post-treatment was investigated and assessed. Both UV low pressure (LP) and medium pressure (MP) lamps were examined. The technology was installed in a pilot plant treating hospital wastewater to provide the study with adequate field data. The effect of the UV irradiation was enhanced with varying dosages of H{sub 2}O{sub 2} to establish an advanced oxidation process (AOP). The efficiency of the pharmaceutical removal process was assessed by examining 14 micropollutants (antibiotics, analgesics, anticonvulsants, beta-blockers, cytostatics and X-ray contrast media) which are typically released by hospitals and detected with liquid chromatography coupled tandem mass spectrometry (LC-MS/MS). While the MBR treatment generally showed only a low degradation capacity for persistent pharmaceuticals, much better degradation was obtained by applying UV irradiation and H{sub 2}O{sub 2} as AOP. The 'conventional' cost-benefit analysis of the different technology options taking into account both electrical energy consumption and pharmaceutical removal efficiency, revealed clearly better performance of low pressure UV lamps as AOP. However, a holistic comparison between the different scenarios was carried out by evaluating their environmental impacts using the life cycle assessment (LCA) methodology. Decisive advantages were highlighted to include this approach in the decision making process.

Elimination of pharmaceutical residues in biologically pre-treated hospital wastewater using advanced UV irradiation technology: A comparative assessment

International Nuclear Information System (INIS)

Köhler, C.; Venditti, S.; Igos, E.; Klepiszewski, K.; Benetto, E.; Cornelissen, A.

2012-01-01

UV irradiation technology as a membrane bioreactor (MBR) post-treatment was investigated and assessed. Both UV low pressure (LP) and medium pressure (MP) lamps were examined. The technology was installed in a pilot plant treating hospital wastewater to provide the study with adequate field data. The effect of the UV irradiation was enhanced with varying dosages of H 2 O 2 to establish an advanced oxidation process (AOP). The efficiency of the pharmaceutical removal process was assessed by examining 14 micropollutants (antibiotics, analgesics, anticonvulsants, beta-blockers, cytostatics and X-ray contrast media) which are typically released by hospitals and detected with liquid chromatography coupled tandem mass spectrometry (LC–MS/MS). While the MBR treatment generally showed only a low degradation capacity for persistent pharmaceuticals, much better degradation was obtained by applying UV irradiation and H 2 O 2 as AOP. The “conventional” cost-benefit analysis of the different technology options taking into account both electrical energy consumption and pharmaceutical removal efficiency, revealed clearly better performance of low pressure UV lamps as AOP. However, a holistic comparison between the different scenarios was carried out by evaluating their environmental impacts using the life cycle assessment (LCA) methodology. Decisive advantages were highlighted to include this approach in the decision making process.

Process Analytical Technology for Crystallization of Active Pharmaceutical Ingredients

DEFF Research Database (Denmark)

Malwade, Chandrakant Ramkrishna; Qu, Haiyan

2018-01-01

Background: Pharmaceutical industry is witnessing increased pressure to introduce innovative and efficient processes for manufacturing of Active Pharmaceutical Ingredients (APIs) in order to be competitive as well as to meet the stringent product quality requirements set by regulatory authorities...... parameters and their impact on quality of APIs and subsequently the drug products assume great significance for pharmaceutical industry. Methods: This review paper focuses on application of PAT tools, an integral part of Quality by Design (QbD) approach, for better understanding, control, and design...

A review of near infrared spectroscopy and chemometrics in pharmaceutical technologies.

Science.gov (United States)

Roggo, Yves; Chalus, Pascal; Maurer, Lene; Lema-Martinez, Carmen; Edmond, Aurélie; Jent, Nadine

2007-07-27

Near-infrared spectroscopy (NIRS) is a fast and non-destructive analytical method. Associated with chemometrics, it becomes a powerful tool for the pharmaceutical industry. Indeed, NIRS is suitable for analysis of solid, liquid and biotechnological pharmaceutical forms. Moreover, NIRS can be implemented during pharmaceutical development, in production for process monitoring or in quality control laboratories. This review focuses on chemometric techniques and pharmaceutical NIRS applications. The following topics are covered: qualitative analyses, quantitative methods and on-line applications. Theoretical and practical aspects are described with pharmaceutical examples of NIRS applications.

Optimization of the pharmaceutical care system for diabetes patients using modern pharmaceutical informatics methodology

Directory of Open Access Journals (Sweden)

Андрій Ігорович Бойко

2016-04-01

Full Text Available Aim. Implementation of pharmaceutical informatics methods in the system of pharmaceutical care for diabetes patients in Ukraine.Methods. System method was used for the analysis of status and reforming the pharmaceutical care for patients with diabetes; program-oriented management at informatization project realization; pharmaceutical informatics in the creation of computer pharmaceutical knowledge bases; methods of data synthesis and summarizing.Results. System analysis of the basic directions of reforming the pharmaceutical care for patients with diabetes in Ukraine was carried out. Ways of it’s of optimization were processed: establishment of specialized pharmacies with implementation of modern information technologies and special postgraduate education for pharmacists. Structure and information providing of computer knowledge base “Pharmaceutical care for patients with diabetes” was substantiated.Conclusion. Based on the regional project “Informatization of prescription antidiabetic drugs circulation in Ukraine” realization, the necessity of establishment of specialized pharmacies providing pharmaceutical care for patients with diabetes was substantiated. Ways for optimization of postgraduate education for pharmacists of the specialized pharmacies by implementation of special thematic improvement cycles were proceed. Computer knowledge base as an effective tool for optimization of pharmaceutical care for patients with diabetes was realized

Information Technology Framework for Pharmaceutical Supply Chain Demand Management: a Brazilian Case Study

Directory of Open Access Journals (Sweden)

Pedro Domingos Antoniolli

2016-01-01

Full Text Available The paper aims at proposing an information technology framework for demand management within a dyad on the supply chain pharmaceutical industry. The paper adopts the exploratory study as research method, involving a producer of generic drugs and its main distributor. Data was collected by semi - structured interviews. In pharmaceu tical supply chain, sharing information boosted by information technology translates into greater flexibility and reliability, lower costs, obtained through more reliable forecasting, and lower inventory requirements. There are few initiatives involving In formation Technology (IT applied to demand management in pharmaceutical supply chains available in the literature. It was found that the IT framework proposed in this research is adherent to the demand management of the focused pharmaceutical dyad. Other assumption was that, if partners processes integration exist, better supply chain performance is achieved. It was found that, by means of proposed tools and solutions, such as RFID and involved partners applications integration, this goal could be achieved . Because of the chosen research approach, results may be restricted to these specific dyadic processes. Further application of the proposed IT framework have to be tested. The paper identifies demand management strategic and operational processes that can reach a better performance by using the proposed IT framework. Based on the literature, were identified which IT requirements should be met to demand management processes optimization. Additionally, were applied questionnaires and interviews to the focuse d dyad personnel, to corroborate the data identified in the literature. Answers found in the case study link literature elements with those stated by respondents. Finally, based on this, was conceived an IT framework composed of three elements: 1. One spec ific for infrastructure, to enable data and systems interoperability among SC participants, considering a

Current Trends on Medical and Pharmaceutical Applications of Inkjet Printing Technology.

Science.gov (United States)

Scoutaris, Nicolaos; Ross, Steven; Douroumis, Dennis

2016-08-01

Inkjet printing is an attractive material deposition and patterning technology that has received significant attention in the recent years. It has been exploited for novel applications including high throughput screening, pharmaceutical formulations, medical devices and implants. Moreover, inkjet printing has been implemented in cutting-edge 3D-printing healthcare areas such as tissue engineering and regenerative medicine. Recent inkjet advances enabled 3D printing of artificial cartilage and skin, or cell constructs for transplantation therapies. In the coming years inkjet printing is anticipated to revolutionize personalized medicine and push the innovation portfolio by offering new paths in patient - specific treatments.

Elimination of pharmaceutical residues in biologically pre-treated hospital wastewater using advanced UV irradiation technology: a comparative assessment.

Science.gov (United States)

Köhler, C; Venditti, S; Igos, E; Klepiszewski, K; Benetto, E; Cornelissen, A

2012-11-15

UV irradiation technology as a membrane bioreactor (MBR) post-treatment was investigated and assessed. Both UV low pressure (LP) and medium pressure (MP) lamps were examined. The technology was installed in a pilot plant treating hospital wastewater to provide the study with adequate field data. The effect of the UV irradiation was enhanced with varying dosages of H2O2 to establish an advanced oxidation process (AOP). The efficiency of the pharmaceutical removal process was assessed by examining 14 micropollutants (antibiotics, analgesics, anticonvulsants, beta-blockers, cytostatics and X-ray contrast media) which are typically released by hospitals and detected with liquid chromatography coupled tandem mass spectrometry (LC-MS/MS). While the MBR treatment generally showed only a low degradation capacity for persistent pharmaceuticals, much better degradation was obtained by applying UV irradiation and H2O2 as AOP. The "conventional" cost-benefit analysis of the different technology options taking into account both electrical energy consumption and pharmaceutical removal efficiency, revealed clearly better performance of low pressure UV lamps as AOP. However, a holistic comparison between the different scenarios was carried out by evaluating their environmental impacts using the life cycle assessment (LCA) methodology. Decisive advantages were highlighted to include this approach in the decision making process. Copyright © 2012 Elsevier B.V. All rights reserved.

[Innovation guidelines and strategies for pharmaceutical engineering of Chinese medicine and their industrial translation].

Science.gov (United States)

Cheng, Yi-Yu; Qu, Hai-Bin; Zhang, Bo-Li

2013-01-01

This paper briefly analyzes the bottlenecks and major technical requirements for pharmaceutical industry of Chinese medicine, providing current status of pharmaceutical engineering of Chinese medicine. The innovation directions and strategies of the pharmaceutical engineering for manufacturing Chinese medicine are proposed along with the framework of their core technology. As a consequence, the development of the third-generation pharmaceutical technology for Chinese medicine, featured as "precision, digital and intelligent", is recommended. The prospects of the pharmaceutical technology are also forecasted.

In-line and Real-time Monitoring of Resonant Acoustic Mixing by Near-infrared Spectroscopy Combined with Chemometric Technology for Process Analytical Technology Applications in Pharmaceutical Powder Blending Systems.

Science.gov (United States)

Tanaka, Ryoma; Takahashi, Naoyuki; Nakamura, Yasuaki; Hattori, Yusuke; Ashizawa, Kazuhide; Otsuka, Makoto

2017-01-01

Resonant acoustic ® mixing (RAM) technology is a system that performs high-speed mixing by vibration through the control of acceleration and frequency. In recent years, real-time process monitoring and prediction has become of increasing interest, and process analytical technology (PAT) systems will be increasingly introduced into actual manufacturing processes. This study examined the application of PAT with the combination of RAM, near-infrared spectroscopy, and chemometric technology as a set of PAT tools for introduction into actual pharmaceutical powder blending processes. Content uniformity was based on a robust partial least squares regression (PLSR) model constructed to manage the RAM configuration parameters and the changing concentration of the components. As a result, real-time monitoring may be possible and could be successfully demonstrated for in-line real-time prediction of active pharmaceutical ingredients and other additives using chemometric technology. This system is expected to be applicable to the RAM method for the risk management of quality.

The Korean Pharmaceutical Industry and the Expansion of the General Pharmaceuticals Market in the 1950-1960s

Directory of Open Access Journals (Sweden)

Kyu-Hwan SIHN

2015-12-01

Full Text Available After the Liberation, the Korean economy was dependent on relief supplies and aid after the ruin of the colonial regime and war. The pharmaceutical business also searched for their share in the delivery of military supplies and the distribution of relief supplies. The supply-side pharmaceutical policy made the pharmaceutical market a wholesale business. The gravity of the situation led to an increased importation of medical supplies, and wholesalers took the lead in establishing the distribution structure, whereas consumers and pharmaceutical business were relatively intimidated. The aid provided by the International Cooperation Administration (ICA marked a turning point in the Korean pharmaceutical industry after the middle of the 1950s. ICA supplied raw materials and equipment funds, while the pharmaceutical business imported advanced technology and capital. The government invited the local production of medical substances, whereas pharmaceutical businesses replaced imported medical substances with locally produced antibiotics. After the 1960s, the production of antibiotics reached saturation. Pharmaceutical businesses needed new markets to break through the stalemate, so they turned their attention to vitamins and health tonics as general pharmaceuticals, as these were suitable for mass production and mass consumption. The modernized patent medicine market after the Opening of Korea was transformed into the contemporized general pharmaceuticals market equipped with the up-to-date facilities and technology in 1960s. Pharmaceutical businesses had to advertise these new products extensively and reform the distribution structure to achieve high profits. With the introduction of TV broadcasting, these businesses invested in TV advertising and generated sizable sales figures. They also established retail pharmacy and chain stores to reform the distribution structure. The end result was a dramatic expansion of the general pharmaceuticals market. The

[The Korean Pharmaceutical Industry and the Expansion of the General Pharmaceuticals Market in the 1950-1960s].

Science.gov (United States)

Sihn, Kyu-Hwan

2015-12-01

After the Liberation, the Korean economy was dependent on relief supplies and aid after the ruin of the colonial regime and war. The pharmaceutical business also searched for their share in the delivery of military supplies and the distribution of relief supplies. The supply-side pharmaceutical policy made the pharmaceutical market a wholesale business. The gravity of the situation led to an increased importation of medical supplies, and wholesalers took the lead in establishing the distribution structure, whereas consumers and pharmaceutical business were relatively intimidated. The aid provided by the International Cooperation Administration (ICA) marked a turning point in the Korean pharmaceutical industry after the middle of the 1950s. ICA supplied raw materials and equipment funds, while the pharmaceutical business imported advanced technology and capital. The government invited the local production of medical substances, whereas pharmaceutical businesses replaced imported medical substances with locally produced antibiotics. After the 1960s, the production of antibiotics reached saturation. Pharmaceutical businesses needed new markets to break through the stalemate, so they turned their attention to vitamins and health tonics as general pharmaceuticals, as these were suitable for mass production and mass consumption. The modernized patent medicine market after the Opening of Korea was transformed into the contemporized general pharmaceuticals market equipped with the up-to-date facilities and technology in 1960s. Pharmaceutical businesses had to advertise these new products extensively and reform the distribution structure to achieve high profits. With the introduction of TV broadcasting, these businesses invested in TV advertising and generated sizable sales figures. They also established retail pharmacy and chain stores to reform the distribution structure. The end result was a dramatic expansion of the general pharmaceuticals market. The market for

Chemometrics-based process analytical technology (PAT) tools: applications and adaptation in pharmaceutical and biopharmaceutical industries.

Science.gov (United States)

Challa, Shruthi; Potumarthi, Ravichandra

2013-01-01

Process analytical technology (PAT) is used to monitor and control critical process parameters in raw materials and in-process products to maintain the critical quality attributes and build quality into the product. Process analytical technology can be successfully implemented in pharmaceutical and biopharmaceutical industries not only to impart quality into the products but also to prevent out-of-specifications and improve the productivity. PAT implementation eliminates the drawbacks of traditional methods which involves excessive sampling and facilitates rapid testing through direct sampling without any destruction of sample. However, to successfully adapt PAT tools into pharmaceutical and biopharmaceutical environment, thorough understanding of the process is needed along with mathematical and statistical tools to analyze large multidimensional spectral data generated by PAT tools. Chemometrics is a chemical discipline which incorporates both statistical and mathematical methods to obtain and analyze relevant information from PAT spectral tools. Applications of commonly used PAT tools in combination with appropriate chemometric method along with their advantages and working principle are discussed. Finally, systematic application of PAT tools in biopharmaceutical environment to control critical process parameters for achieving product quality is diagrammatically represented.

[Historical sketch of modern pharmaceutical science and technology (Part 3). From the second half of the 19th century to World War II].

Science.gov (United States)

Yamakawa, K

1995-01-01

The history of modern pharmaceutical science and technology, from the second half of the 19th century to the end of World War II, is divided into nine sections for the purpose of discussion. 1. The European medical and pharmaceutical science and technology at the end of the 19th century is reviewed. Pharmacology, bacteriology and biochemistry were built in this period. 2. The Meiji Government accepted Western medicine and medical law and regulations in 1883. Consequently, the Japanese physician changed from Eastern (Kanpooi) to Western (Seiyooi). 3. Modern scientific and engineering education had been accepted in America, England, Germany, and France etc. Foreign scientists and engineers (Oyatoi-gai-kokujin) were educated by practice and theory. The Faculty of Engineering was established in the universities in Japan. This fact is one of the differences in the history of universities in Europe and America. 4. Pharmaceutical education in the Meiji period (1873-1911). Twenty-nine schools of pharmacy were built in this period. However, 20 schools of pharmacy had been closed. Pharmacy and pharmaceutical industry was not established in the Meiji era. 5. The profession of pharmacist in 1873-1944. The policy of medicine was changed by the Meiji Government in 1889, when Western physicians were allowed to prepare medicines for patients, and this practice continues today. Political and technological power of Japanese pharmacists was weak, so their role was not estimated. 6. Consequences of world War I, and the establishment of the pharmaceutical industry. The Sino-Japanese War (1894-95) and Russo-Japanese War (1904-05) were won fortunately. The first pharmaceutical company was established in 1885. At this times, many pharmaceutical manufacturing companies, which were converted from whole sale merchants, were built. Then started the manufacturing of commercial drugs. 7. Hygienic chemistry and some problems of public hygiene. The causes of diseses unique to Japan, such as

Cyclodextrins as drug carriers in Pharmaceutical Technology: The state of the art.

Science.gov (United States)

Conceição, Jaime; Adeoye, Oluwatomide; Cabral-Marques, Helena Maria; Lobo, Jose Manuel Sousa

2017-12-18

Cyclodextrins (CDs) are versatile excipients with an essential role in drug delivery, as they can form non-covalently bonded inclusion complexes (host-guest complexes) with several drugs either in solution or in the solid state. The main purpose of this publication was to carry out a state of the art of CDs as complexing agents in drug carrier systems. In this way, the history, properties and pharmaceutical applications of the CDs were highlighted with typical examples. The methods to enhance the complexation efficiency (CE) and the CDs applications in solid dosage forms were emphasized in more detail. The main advantages of using these cyclic oligosaccharides are as follows: (1) to enhance solubility/dissolution/ bioavailability of poorly soluble drugs; (2) to enhance drug stability; (3) to modify the drug release site and/or time profile; and (4) to reduce drug side effects (for example, gastric or ocular irritation). These compounds present favorable toxicological profile for human use and therefore there are various medicines containing CDs approved by regulatory authorities worldwide. On the other hand, the major drawback of CDs is the increase in formulation bulk, once the CE is, in general, very low. This aspect is particularly relevant in solid dosage forms and limits the use of CDs to potent drugs. CDs have great potential as drug carriers in Pharmaceutical Technology and can be used by the formulator in order to improve the drug properties such as solubility, bioavailability and stability. Additionally, recent studies have shown that these compounds can be applied as active pharmaceutical ingredients. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

APPROACHES TO IMPLEMENTATION OF AN INTEGRATED MANAGEMENT SYSTEM IN THE PHARMACEUTICAL INDUSTRY. GALENICAL PHARMACEUTICAL PRODUCTION

Directory of Open Access Journals (Sweden)

Ershova Elena Vladimirovna

2015-10-01

Full Text Available This article reviews the issues associated with development of an integrated quality management system and its implementation into a galenical pharmaceutical company. Recently, the Russian pharmaceutical industry has been developing extensively: pharmaceutical clusters are being formed, new and innovative technologies are being developed. For the enterprises producing galenical pharmaceutical products, which feature low prices and a high level of competition, development and implementation of management systems is a way to prove their competitiveness. The purpose of this article is to review the architecture and the key elements of integrated management systems for pharmaceutical enterprises, develop an integrated management system in terms of the upcoming revision of ISO 9001:2015, as well as to describe the benefits of implementation of such systems. The presented approach is the result of an educational project implemented within the framework of the MBA programme in "Master of Business Administration (MBA" in the Federal State Budgetary Educational Institution of Continuing Professional Education Pastukhov State Academy of Industrial Management.

Recent advances in medicinal chemistry and pharmaceutical technology--strategies for drug delivery to the brain.

Science.gov (United States)

Denora, Nunzio; Trapani, Adriana; Laquintana, Valentino; Lopedota, Angela; Trapani, Giuseppe

2009-01-01

This paper provides a mini-review of some recent approaches for the treatment of brain pathologies examining both medicinal chemistry and pharmaceutical technology contributions. Medicinal chemistry-based strategies are essentially aimed at the chemical modification of low molecular weight drugs in order to increase their lipophilicity or the design of appropriate prodrugs, although this review will focus primarily on the use of prodrugs and not analog development. Recently, interest has been focused on the design and evaluation of prodrugs that are capable of exploiting one or more of the various endogenous transport systems at the level of the blood brain barrier (BBB). The technological strategies are essentially non-invasive methods of drug delivery to malignancies of the central nervous system (CNS) and are based on the use of nanosystems (colloidal carriers) such as liposomes, polymeric nanoparticles, solid lipid nanoparticles, polymeric micelles and dendrimers. The biodistribution of these nanocarriers can be manipulated by modifying their surface physico-chemical properties or by coating them with surfactants and polyethylene-glycols (PEGs). Liposomes, surfactant coated polymeric nanoparticles, and solid lipid nanoparticles are promising systems for delivery of drugs to tumors of the CNS. This mini-review discusses issues concerning the scope and limitations of both the medicinal chemistry and technological approaches. Based on the current findings, it can be concluded that crossing of the BBB and drug delivery to CNS is extremely complex and requires a multidisciplinary approach such as a close collaboration and common efforts among researchers of several scientific areas, particularly medicinal chemists, biologists and pharmaceutical technologists.

Pharmaceutical virtue.

Science.gov (United States)

Martin, Emily

2006-06-01

In the early history of psychopharmacology, the prospect of developing technologically sophisticated drugs to alleviate human ills was surrounded with a fervor that could be described as religious. This paper explores the subsequent history of the development of psychopharmacological agents, focusing on the ambivalent position of both the industry and its employees. Based on interviews with retired pharmaceutical employees who were active in the industry in the 1950s and 1960s when the major breakthroughs were made in the development of MAOIs and SSRIs, the paper explores the initial development of educational materials for use in sales campaigns. In addition, based on interviews with current employees in pharmaceutical sales and marketing, the paper describes the complex perspective of contemporary pharmaceutical employees who must live surrounded by the growing public vilification of the industry as rapacious and profit hungry and yet find ways to make their jobs meaningful and dignified. The paper will contribute to the understudied problem of how individuals function in positions that require them to be part of processes that on one description constitute a social evil, but on another, constitute a social good.

Coordinated research project on radiation sterilization and decontamination of pharmaceuticals and pharmaceutical raw materials. CRP report

International Nuclear Information System (INIS)

2005-01-01

Radiation processing is a very convenient tool for imparting desirable effects in materials and it has been an area of enormous interest in the last few decades. Radiation processing of synthetic and natural polymers for improving their characteristics is largely used in laboratory and industrial scale. Radiation sterilization is a well developed and established technology for many products. It is especially useful for the treatment of pharmaceuticals due to flexibility of radiation processing to be carried out at any desired temperature, sterilizability of mixed products in kits, offering simultaneous sterilization and modification of polymer based formulations. The success of radiation technology for processing of synthetic and natural polymers and treatment of pharmaceuticals has been based, to a large extent, on empirical knowledge. But now, the applications of natural polymers are being sought in knowledge-demanding areas such as pharmacy and biotechnology. Reliable analytical methods are being developed for controlling of degradation effects of radiation on polymers. Procedures and chemical formulations are being investigated enhancing or preventing degradation effects depending on the desired application of the process. The Coordinated Research Project (CRP) on the use of radiation processing for sterilization or decontamination of pharmaceuticals and pharmaceutical raw materials has been completed in 2002. The overall objective of the CRP was to coordinate the research and development programmes carried out in different countries in use of radiation processing for sterilization or decontamination of pharmaceuticals and pharmaceutic raw materials. It has been concluded that in addition to well known advantages of radiation sterilization being a well developed and established technology requiring the control of only one parameter, dose, to achieve sterilization; it is especially useful for the treatment of pharmaceuticals due to flexibility of radiation

Coordinated research project on radiation sterilization and decontamination of pharmaceuticals and pharmaceutical raw materials. CRP report

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

Radiation processing is a very convenient tool for imparting desirable effects in materials and it has been an area of enormous interest in the last few decades. Radiation processing of synthetic and natural polymers for improving their characteristics is largely used in laboratory and industrial scale. Radiation sterilization is a well developed and established technology for many products. It is especially useful for the treatment of pharmaceuticals due to flexibility of radiation processing to be carried out at any desired temperature, sterilizability of mixed products in kits, offering simultaneous sterilization and modification of polymer based formulations. The success of radiation technology for processing of synthetic and natural polymers and treatment of pharmaceuticals has been based, to a large extent, on empirical knowledge. But now, the applications of natural polymers are being sought in knowledge-demanding areas such as pharmacy and biotechnology. Reliable analytical methods are being developed for controlling of degradation effects of radiation on polymers. Procedures and chemical formulations are being investigated enhancing or preventing degradation effects depending on the desired application of the process. The Coordinated Research Project (CRP) on the use of radiation processing for sterilization or decontamination of pharmaceuticals and pharmaceutical raw materials has been completed in 2002. The overall objective of the CRP was to coordinate the research and development programmes carried out in different countries in use of radiation processing for sterilization or decontamination of pharmaceuticals and pharmaceutic raw materials. It has been concluded that in addition to well known advantages of radiation sterilization being a well developed and established technology requiring the control of only one parameter, dose, to achieve sterilization; it is especially useful for the treatment of pharmaceuticals due to flexibility of radiation

New perspectives for visual characterization of pharmaceutical solids

DEFF Research Database (Denmark)

Laitinen, Niklas; Antikainen, Osmo; Rantanen, Jukka

2004-01-01

The utilization of descriptive image information in pharmaceutical powder technology is rather limited. Consequently, the development of this discipline is a challenge within physical characterization of pharmaceutical solids. The aim of this study was to develop and evaluate an inventive visual...... in particle size analysis also enabling the evaluation of the further product quality in the end of the granulation process. The idea of characterization of bulk surface images opens new perspectives for characterization of pharmaceutical solids....

Pharmaceutical production of nano particles using supercritical or dense gas technology

International Nuclear Information System (INIS)

Regtop, H.

2002-01-01

Full text: The primary aim of our proposed research is to develop pharmaceutical formulations with enhanced pharmacokinetics and increased bioavailability. The particular drug delivery systems of interest are, oral, aerosols, injectable and topical with well-recognised and distinct problems of bioavailability. More than 40% of all drugs in the USP or BP are insoluble or have some problem with solubility. It is estimated in 2000, the total combined sales of drugs that are insoluble or poorly soluble was US$37 billion. Precise and predictable drug delivery is made more possible by producing uniform micron size particles or powders, which can improve the efficiency and effectiveness of therapeutical formulations. Hence the purpose of micronisation is to increase bioavailability and also to allow other modes of administration, eg insulin is a protein, which is an injectable for the treatment of diabetes, but recently particles of 1-4 microns of insulin are in phase 3 clinical trials to deliver the drug to diabetics as an inhalant. In addition aerosolised drugs such as mucolytics, antibiotics, antiinflammatory drugs and hormones have recently been trailed. Finely powdered pharmaceuticals are however difficult to process by current techniques. In spray drying the operating temperatures are often too high for heat sensitive drugs. Thermal degradation of compounds can also be experienced in milling due to high rates of shear and requires high energy inputs and do not produce particles within a narrow range distribution. A relatively new technique which has been used and developed by Eiffel Technologies to produce uniform micron and sub micron size particles is a dense gas process in which the gas is used as an antisolvent to precipitate compounds from solution. Pharmaceutical processing with dense gas is relatively new and is an efficient process for producing high purity micronised particles with defined morphological structures and with a narrow size distribution rate

Dropwise additive manufacturing of pharmaceutical products for melt-based dosage forms.

Science.gov (United States)

Içten, Elçin; Giridhar, Arun; Taylor, Lynne S; Nagy, Zoltan K; Reklaitis, Gintaras V

2015-05-01

The US Food and Drug Administration introduced the quality by design approach and process analytical technology guidance to encourage innovation and efficiency in pharmaceutical development, manufacturing, and quality assurance. As part of this renewed emphasis on the improvement of manufacturing, the pharmaceutical industry has begun to develop more efficient production processes with more intensive use of online measurement and sensing, real-time quality control, and process control tools. Here, we present dropwise additive manufacturing of pharmaceutical products (DAMPP) as an alternative to conventional pharmaceutical manufacturing methods. This mini-manufacturing process for the production of pharmaceuticals utilizes drop on demand printing technology for automated and controlled deposition of melt-based formulations onto edible substrates. The advantages of drop-on-demand technology, including reproducible production of small droplets, adjustable drop sizing, high placement accuracy, and flexible use of different formulations, enable production of individualized dosing even for low-dose and high-potency drugs. In this work, DAMPP is used to produce solid oral dosage forms from hot melts of an active pharmaceutical ingredient and a polymer. The dosage forms are analyzed to show the reproducibility of dosing and the dissolution behavior of different formulations. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

Vulnerabilities to misinformation in online pharmaceutical marketing.

Science.gov (United States)

De Freitas, Julian; Falls, Brian A; Haque, Omar S; Bursztajn, Harold J

2013-05-01

Given the large percentage of Internet users who search for health information online, pharmaceutical companies have invested significantly in online marketing of their products. Although online pharmaceutical marketing can potentially benefit both physicians and patients, it can also harm these groups by misleading them. Indeed, some pharmaceutical companies have been guilty of undue influence, which has threatened public health and trust. We conducted a review of the available literature on online pharmaceutical marketing, undue influence and the psychology of decision-making, in order to identify factors that contribute to Internet users' vulnerability to online pharmaceutical misinformation. We find five converging factors: Internet dependence, excessive trust in the veracity of online information, unawareness of pharmaceutical company influence, social isolation and detail fixation. As the Internet continues to change, it is important that regulators keep in mind not only misinformation that surrounds new web technologies and their contents, but also the factors that make Internet users vulnerable to misinformation in the first place. Psychological components are a critical, although often neglected, risk factor for Internet users becoming misinformed upon exposure to online pharmaceutical marketing. Awareness of these psychological factors may help Internet users attentively and safely navigate an evolving web terrain.

A new e-beam application in the pharmaceutical industry

International Nuclear Information System (INIS)

Sadat, Theo; Malcolm, Fiona

2005-01-01

The paper presents a new electron beam application in the pharmaceutical industry: an in-line self-shielded atropic transfer system using electron beam for surface decontamination of products entering a pharmaceutical filling line. The unit was developed by Linac Technologies in response to the specifications of a multi-national pharmaceutical company, to solve the risk of microbial contamination entering a filling line housed inside an isolator. In order to fit the sterilization unit inside the pharmaceutical plant, a 'miniature' low-energy (200 keV) electron beam accelerator and e-beam tunnel were designed, all conforming to the pharmaceutical good manufacturing practice (GMP) regulations. Process validation using biological indicators is described, with reference to the regulations governing the pharmaceutical industry. Other industrial applications of a small-sized self-shielded electron beam sterilization unit are mentioned

Patrick Couvreur: inspiring pharmaceutical innovation.

Science.gov (United States)

Stanwix, Hannah

2014-05-01

Patrick Couvreur speaks to Hannah Stanwix, Managing Comissioning Editor: Professor Patrick Couvreur received his pharmacy degree from the Université Catholique de Louvain (Louvain-la-Neuve, Belgium) in 1972. He holds a PhD in pharmaceutical technology from the same university and completed a postdoctoral fellowship at the Eidgenössische Technische Hochschule (Zürich, Switzerland). Since 1984, Professor Couvreur has been Full Professor of Pharmacy at the Paris-Sud University (Paris, France) and was holder of the Chair of Innovation Technologique at the prestigious Collège de France (Paris, France). He has published more than 450 peer-reviewed articles and has an H-index of 73, with over 19,000 citations. Professor Coureur has been recognized by numerous national and international awards, including the 2004 Pharmaceutical Sciences World Congress Award, the prestigious Host Madsen Medal, the Prix Galien, the European Pharmaceutical Scientist Award 2011 from the European Federation of Pharmaceutical Sciences, the Médaille de l'Innovation from the Centre National de la Recherche Scientifique, and recently the European Inventor Award 2013 from the European Patent Office.

Regulatory Perspectives on Continuous Pharmaceutical Manufacturing: Moving From Theory to Practice: September 26-27, 2016, International Symposium on the Continuous Manufacturing of Pharmaceuticals.

Science.gov (United States)

Nasr, Moheb M; Krumme, Markus; Matsuda, Yoshihiro; Trout, Bernhardt L; Badman, Clive; Mascia, Salvatore; Cooney, Charles L; Jensen, Keith D; Florence, Alastair; Johnston, Craig; Konstantinov, Konstantin; Lee, Sau L

2017-11-01

Continuous manufacturing plays a key role in enabling the modernization of pharmaceutical manufacturing. The fate of this emerging technology will rely, in large part, on the regulatory implementation of this novel technology. This paper, which is based on the 2nd International Symposium on the Continuous Manufacturing of Pharmaceuticals, describes not only the advances that have taken place since the first International Symposium on Continuous Manufacturing of Pharmaceuticals in 2014, but the regulatory landscape that exists today. Key regulatory concepts including quality risk management, batch definition, control strategy, process monitoring and control, real-time release testing, data processing and management, and process validation/verification are outlined. Support from regulatory agencies, particularly in the form of the harmonization of regulatory expectations, will be crucial to the successful implementation of continuous manufacturing. Collaborative efforts, among academia, industry, and regulatory agencies, are the optimal solution for ensuring a solid future for this promising manufacturing technology. Copyright © 2017 American Pharmacists Association®. All rights reserved.

The future of pharmaceutical quality and the path to get there.

Science.gov (United States)

Yu, Lawrence X; Kopcha, Michael

2017-08-07

While six sigma quality has long been achieved in other industries, it is rarely seen in the pharmaceutical sector. However, consumers and patients deserve six sigma quality pharmaceuticals with minimal risks of shortages or recalls. We propose that the future of pharmaceutical quality is six sigma, meaning that no more than 3.4 defects occur per million opportunities. We discuss the path to get there, including economic drivers, performance-based regulation, Quality by Design, advanced manufacturing technologies, and continuous improvement and operational excellence. This article outlines an ambitious goal and is intended to be thought-provoking in spite of the challenging path to get there. This goal is envisioned because it is in the best interest of patients and consumers and is realizable with continued advances and investments in science and technology. The fundamental destination of pharmaceutical quality has been long envisioned: a maximally efficient, agile, flexible pharmaceutical manufacturing sector that reliably produces high quality drugs without extensive regulatory oversight. Published by Elsevier B.V.

Review on Physicochemical, Chemical, and Biological Processes for Pharmaceutical Wastewater

Science.gov (United States)

Li, Zhenchen; Yang, Ping

2018-02-01

Due to the needs of human life and health, pharmaceutical industry has made great progress in recent years, but it has also brought about severe environmental problems. The presence of pharmaceuticals in natural waters which might pose potential harm to the ecosystems and humans raised increasing concern worldwide. Pharmaceuticals cannot be effectively removed by conventional wastewater treatment plants (WWTPs) owing to the complex composition, high concentration of organic contaminants, high salinity and biological toxicity of pharmaceutical wastewater. Therefore, the development of efficient methods is needed to improve the removal effect of pharmaceuticals. This review provides an overview on three types of treatment technologies including physicochemical, chemical and biological processes and their advantages and disadvantages respectively. In addition, the future perspectives of pharmaceutical wastewater treatment are given.

Vulnerabilities to misinformation in online pharmaceutical marketing

Science.gov (United States)

De Freitas, Julian; Falls, Brian A; Haque, Omar S; Bursztajn, Harold J

2013-01-01

Given the large percentage of Internet users who search for health information online, pharmaceutical companies have invested significantly in online marketing of their products. Although online pharmaceutical marketing can potentially benefit both physicians and patients, it can also harm these groups by misleading them. Indeed, some pharmaceutical companies have been guilty of undue influence, which has threatened public health and trust. We conducted a review of the available literature on online pharmaceutical marketing, undue influence and the psychology of decision-making, in order to identify factors that contribute to Internet users’ vulnerability to online pharmaceutical misinformation. We find five converging factors: Internet dependence, excessive trust in the veracity of online information, unawareness of pharmaceutical company influence, social isolation and detail fixation. As the Internet continues to change, it is important that regulators keep in mind not only misinformation that surrounds new web technologies and their contents, but also the factors that make Internet users vulnerable to misinformation in the first place. Psychological components are a critical, although often neglected, risk factor for Internet users becoming misinformed upon exposure to online pharmaceutical marketing. Awareness of these psychological factors may help Internet users attentively and safely navigate an evolving web terrain. PMID:23761527

Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation.

Science.gov (United States)

Patil, Hemlata; Tiwari, Roshan V; Repka, Michael A

2016-02-01

Hot-melt extrusion (HME) is a promising technology for the production of new chemical entities in the developmental pipeline and for improving products already on the market. In drug discovery and development, industry estimates that more than 50% of active pharmaceutical ingredients currently used belong to the biopharmaceutical classification system II (BCS class II), which are characterized as poorly water-soluble compounds and result in formulations with low bioavailability. Therefore, there is a critical need for the pharmaceutical industry to develop formulations that will enhance the solubility and ultimately the bioavailability of these compounds. HME technology also offers an opportunity to earn intellectual property, which is evident from an increasing number of patents and publications that have included it as a novel pharmaceutical formulation technology over the past decades. This review had a threefold objective. First, it sought to provide an overview of HME principles and present detailed engineered extrusion equipment designs. Second, it included a number of published reports on the application of HME techniques that covered the fields of solid dispersions, microencapsulation, taste masking, targeted drug delivery systems, sustained release, films, nanotechnology, floating drug delivery systems, implants, and continuous manufacturing using the wet granulation process. Lastly, this review discussed the importance of using the quality by design approach in drug development, evaluated the process analytical technology used in pharmaceutical HME monitoring and control, discussed techniques used in HME, and emphasized the potential for monitoring and controlling hot-melt technology.

75 FR 54627 - Best Management Practices for Unused Pharmaceuticals at Health Care Facilities

Science.gov (United States)

2010-09-08

... at very low concentrations. EPA has been studying unused pharmaceutical disposal practices at health... avoiding pharmaceutical waste; Practices for identifying and managing types of unused pharmaceuticals; and...: September 1, 2010. Ephraim S. King, Director, Office of Science and Technology. [FR Doc. 2010-22325 Filed 9...

Evaluation of cleaner production audit in pharmaceutical production industry: case study of the pharmaceutical plant in Dalian, P. R. China

Energy Technology Data Exchange (ETDEWEB)

Li, Zhi-dong [Dalian University of Technology, Key Laboratory of Industrial Ecology and Environmental Engineering (MOE), School of Environmental Science and Technology, Dalian (China); Dalian Cleaner Production Centre, Dalian, Liaoning (China); Dalian Municipal Design and Research Institute of Environmental Science, Dalian, Liaoning (China); Zhang, Shu-shen; Zhang, Yun [Dalian University of Technology, Key Laboratory of Industrial Ecology and Environmental Engineering (MOE), School of Environmental Science and Technology, Dalian (China); Zhang, Yong; Wei, Li [Dalian Cleaner Production Centre, Dalian, Liaoning (China); Dalian Municipal Design and Research Institute of Environmental Science, Dalian, Liaoning (China)

2011-02-15

The pharmaceutical industry in China makes an important contribution to the national economy. However, the associated pollution problems cause gradual deterioration of the environment and impact adversely on the local community. Cleaner production (CP) technology, an effective way to reduce waste emission and save resources, has been widely employed in the pharmaceutical industry in the developed countries. Such technologies have been applied in a number of factories in China, although there is no integrated assessment and implementation procedure for implementing CP technologies in pharmaceutical plants. To solve such problems, a series of CP options are proposed and assessed here. CP is a powerful tool for decreasing waste production, limiting environmental pollution and natural resource depletion. Moreover, the return on investment in CP is quick, so it would seem that CP activities should be very much in demand by enterprises. Reality is less optimistic: frequently only limited interest is expressed, even after an explanation; business people hesitate to become actively involved. The processes in the pharmaceutical production industry produce a vast amount of waste, including wastewater with high concentrations of organic substances (the principal component), solid waste, and organic off-gas. To solve such problems, a series of CP options are proposed and assessed in this study. Having consideration to environmental impacts and economic efficiency, four groups of medium/high cost CP options were screened in an integrated assessment. To verify the proposed options, a case study was conducted in Degussa Luyuan, Northeast China. The characteristics of resource consumption and waste emission during the production process were identified. The proposed options were evaluated according to different aspects. An integrated CP system based on the proposed options was designed and then implemented in the factory. In three years of practical use, the productivity and

RECENT TRENDS IN PACKAGING SYSTEMS FOR PHARMACEUTICAL PRODUCTS

Directory of Open Access Journals (Sweden)

Renata Dobrucka

2014-12-01

Full Text Available Background:  In recent years, pharmaceutical packaging market was one of the fastest growing areas of the packaging industry. At the same time the packaging manufacturers put high demands on quality and safety. Methods: Review of innovations in packaging systems for pharmaceutical products was made including newest information of researches and achievements of recent years. Results and conclusion: Observed in recent years the development of pharmaceutical packaging market expanded due to with the huge technological advances that allow introduction of new packaging. Also, in this study presented intelligent packaging in pharmacy and innovation in child-resistance packaging.

A perspective on PSE in pharmaceutical process development and innovation

DEFF Research Database (Denmark)

Gernaey, Krist; Cervera Padrell, Albert Emili; Woodley, John

2012-01-01

The pharmaceutical industry is under growing pressure to increase efficiency, both in production and in process development. This paper discusses the central role of Process Systems Engineering (PSE) methods and tools in pharmaceutical process development and innovation, and searches for answers...... to questions such as: Which PSE methods can be applied readily? Where is more method development needed? The paper covers key subjects for development of economically and environmentally sustainable pharmaceutical processes, including Process Analytical Technology in its broadest sense, continuous...... pharmaceutical manufacturing and green processes, and is illustrated with a series of short examples taken from the literature and ongoing research projects....

Creating knowledge structures in the pharmaceutical industry: the increasing significance of virtual organisation.

Science.gov (United States)

Salazar, A; Howells, J

2000-01-01

This paper explores the specific trend and challenges facing the pharmaceutical industry regarding the exploitation of Internet e-commerce technology and virtual organisation to develop and maintain competitive advantage. There are two important facets of the current trend. One is the rapid development of a complex network of alliances between the established pharmaceutical companies and the specialised biotechnology company start-ups. The other is the rapid growth of internet e-commerce companies dedicated to developing specialised technological platforms for acquiring and selling genetic and biochemical knowledge. The underlying challenge is how big pharmaceutical companies can emulate some of the innovation processes of smaller biotechnology company start-ups, and how they can appropriate and applied new technological knowledge on the development of new drugs. Pharmaceutical companies in order to retain competitive advantage need to continuously monitor all aspects of knowledge management with regard to the R&D and manufacturing process (as well as customer management and marketing). Technological change and organisational restructuring should be aimed at boosting the capacity of large firms to innovate rapidly.

Strategic funding priorities in the pharmaceutical sciences allied to Quality by Design (QbD) and Process Analytical Technology (PAT)

DEFF Research Database (Denmark)

Aksu, Buket; De Beer, Thomas; Folestad, Staffan

2012-01-01

however have the potential to provide considerable challenges to the establishment of cost effective and robust supply chains. To guarantee product quality and surety of supply for essential medicines it is necessary that manufacturing science keeps pace with advances in pharmaceutical R......Substantial changes in Pharmaceutical R&D strategy are required to address existing issues of low productivity, imminent patent expirations and pressures on pricing. Moves towards personalized healthcare and increasing diversity in the nature of portfolios including the rise of biopharmaceuticals......&D. In this position paper, the EUFEPS QbD and PAT Sciences network make recommendations that European industry, academia and health agencies focus attention on delivering step changes in science and technology in a number of key themes. These subject areas, all underpinned by the sciences allied to QbD and PAT...

Windows of opportunities and technological innovation in the Brazilian pharmaceutical industry.

Science.gov (United States)

Tigre, Paulo Bastos; Nascimento, Caio Victor Machado França do; Costa, Laís Silveira

2016-11-03

The Brazilian pharmaceutical industry is heavily dependent on external sources of inputs, capital, and technology. However, the emergence of technological opportunities and the development of biotechnology and the decline of the patent boom and resulting advances by generic drugs have opened windows of opportunities for the local industry. The article examines the Brazilian industry's innovative behavior vis-à-vis these opportunities, showing that although the industry as a whole invests little in innovation, a few large Brazilian companies have expanded their market share and stepped up their investments in research and development, supported by public policies for innovation. Resumo: A indústria farmacêutica brasileira caracteriza-se pela grande dependência de fontes externas de insumos, capital e tecnologia. O surgimento de oportunidades tecnológicas, associadas ao desenvolvimento da biotecnologia e ao fim do boom das patentes com o consequente avanço dos medicamentos genéricos, entretanto, vem abrindo janelas de oportunidades para a indústria local. Este artigo examina o comportamento inovador da indústria brasileira à luz dessas oportunidades, revelando que, embora o conjunto da indústria mantenha baixos níveis de investimentos em inovação, um pequeno grupo de grandes empresas nacionais vem ampliando sua participação no mercado e intensificando seus investimentos em pesquisa e desenvolvimento, apoiados por políticas públicas de inovação.

Membrane Bioprocesses for Pharmaceutical Micropollutant Removal from Waters

Directory of Open Access Journals (Sweden)

Matthias de Cazes

2014-10-01

Full Text Available The purpose of this review work is to give an overview of the research reported on bioprocesses for the treatment of domestic or industrial wastewaters (WW containing pharmaceuticals. Conventional WW treatment technologies are not efficient enough to completely remove all pharmaceuticals from water. Indeed, these compounds are becoming an actual public health problem, because they are more and more present in underground and even in potable waters. Different types of bioprocesses are described in this work: from classical activated sludge systems, which allow the depletion of pharmaceuticals by bio-degradation and adsorption, to enzymatic reactions, which are more focused on the treatment of WW containing a relatively high content of pharmaceuticals and less organic carbon pollution than classical WW. Different aspects concerning the advantages of membrane bioreactors for pharmaceuticals removal are discussed, as well as the more recent studies on enzymatic membrane reactors to the depletion of these recalcitrant compounds.

Pharmaceutical HIV prevention technologies in the UK: six domains for social science research.

Science.gov (United States)

Keogh, Peter; Dodds, Catherine

2015-01-01

The development of pharmaceutical HIV prevention technologies (PPTs) over the last five years has generated intense interest from a range of stakeholders. There are concerns that these clinical and pharmaceutical interventions are proceeding with insufficient input of the social sciences. Hence key questions around implementation and evaluation remain unexplored whilst biomedical HIV prevention remains insufficiently critiqued or theorised from sociological as well as other social science perspectives. This paper presents the results of an expert symposium held in the UK to explore and build consensus on the role of the social sciences in researching and evaluating PPTs in this context. The symposium brought together UK social scientists from a variety of backgrounds. A position paper was produced and distributed in advance of the symposium and revised in the light this consultation phase. These exchanges and the emerging structure of this paper formed the basis for symposium panel presentations and break-out sessions. Recordings of all sessions were used to further refine the document which was also redrafted in light of ongoing comments from symposium participants. Six domains of enquiry for the social sciences were identified and discussed: self, identity and personal narrative; intimacy, risk and sex; communities, resistance and activism; systems, structures and institutions; economic considerations and analyses; and evaluation and outcomes. These are discussed in depth alongside overarching consensus points for social science research in this area as it moves forward.

In silico toxicology for the pharmaceutical sciences

International Nuclear Information System (INIS)

Valerio, Luis G.

2009-01-01

The applied use of in silico technologies (a.k.a. computational toxicology, in silico toxicology, computer-assisted tox, e-tox, i-drug discovery, predictive ADME, etc.) for predicting preclinical toxicological endpoints, clinical adverse effects, and metabolism of pharmaceutical substances has become of high interest to the scientific community and the public. The increased accessibility of these technologies for scientists and recent regulations permitting their use for chemical risk assessment supports this notion. The scientific community is interested in the appropriate use of such technologies as a tool to enhance product development and safety of pharmaceuticals and other xenobiotics, while ensuring the reliability and accuracy of in silico approaches for the toxicological and pharmacological sciences. For pharmaceutical substances, this means active and impurity chemicals in the drug product may be screened using specialized software and databases designed to cover these substances through a chemical structure-based screening process and algorithm specific to a given software program. A major goal for use of these software programs is to enable industry scientists not only to enhance the discovery process but also to ensure the judicious use of in silico tools to support risk assessments of drug-induced toxicities and in safety evaluations. However, a great amount of applied research is still needed, and there are many limitations with these approaches which are described in this review. Currently, there is a wide range of endpoints available from predictive quantitative structure-activity relationship models driven by many different computational software programs and data sources, and this is only expected to grow. For example, there are models based on non-proprietary and/or proprietary information specific to assessing potential rodent carcinogenicity, in silico screens for ICH genetic toxicity assays, reproductive and developmental toxicity, theoretical

Optimized biofilm-based systems for removal of pharmaceuticals from hospital waste water

DEFF Research Database (Denmark)

Andersen, Henrik R; Chhetri, Ravi; Hansen, Kamilla

Discharge of hospital wastewater is of increasing concern, as hospitals are identified as chemical pollution source due to pharmaceutical content. This project seeks to develop the most efficient and economically feasible technology to remove pharmaceuticals from wastewater, regardless of the poi...

Comprehensive taxonomy and worldwide trends in pharmaceutical policies in relation to country income status.

Science.gov (United States)

Maniadakis, N; Kourlaba, G; Shen, J; Holtorf, A

2017-05-25

Rapidly evolving socioeconomic and technological trends make it challenging to improve access, effectiveness and efficiency in the use of pharmaceuticals. This paper identifies and systematically classifies the prevailing pharmaceutical policies worldwide in relation to a country's income status. A literature search was undertaken to identify and taxonomize prevailing policies worldwide. Countries that apply those policies and those that do not were then grouped by income status. Pharmaceutical policies are linked to a country's socioeconomics. Developed countries have universal coverage and control pharmaceuticals with external and internal price referencing systems, and indirect price-cost controls; they carry out health technology assessments and demand utilization controls. Price-volume and risk-sharing agreements are also evolving. Developing countries are underperforming in terms of coverage and they rely mostly on restrictive state controls to regulate prices and expenditure. There are significant disparities worldwide in the access to pharmaceuticals, their use, and the reimbursement of costs. The challenge in high-income countries is to maintain access to care whilst dealing with trends in technology and aging. Essential drugs should be available to all; however, many low- and middle-income countries still provide most of their population with only poor access to medicines. As economies grow, there should be greater investment in pharmaceutical care, looking to the policies of high-income countries to increase efficiency. Pharmaceutical companies could also develop special access schemes with low prices to facilitate coverage in low-income countries.

Regulatory Science in Practice (Pharmaceuticals and Medical Devices Agency).

Science.gov (United States)

Hojo, Taisuke

2017-01-01

Review, safety, and relief services of the Pharmaceuticals and Medical Devices Agency are primarily focused on scientifically evaluating pharmaceuticals, medical devices, and cellular and tissue-based products referring to their quality, efficacy, and safety, which requires a variety of scientific knowledge and methods. Pharmaceutical regulation should be established based on the most advanced scientific expertise at all times. In order to evaluate products that use cutting-edge technology such as induced pluripotent stem cells and information and communication technology adequately, since fiscal year 2012 the Science Committee has been established as a platform to exchange opinions among members from top-ranking domestic and international academia and to enhance personnel exchanges through the Initiative to Facilitate Development of Innovative Drugs. In addition, the Regulatory Science Center will be established in 2018 to increase the integrity of our services for product reviews and safety measures. In particular, requiring electronic data submissions for clinical trial applications followed by an advanced approach to analysis should not only enhance the quality of reviews of individual products but should also support the development of pharmaceuticals and medical devices by providing pharmaceutical affairs consultations on research and development strategies with various guidelines based on new insights resulting from product-bridging data analysis. Moreover, a database including electronic health records with comprehensive medical information collected mainly from 10 cooperating medical institutions will be developed with the aim of developing safety measures in a more timely manner using methods of pharmacoepidemiological analysis.

[Pharmaceutical product quality control and good manufacturing practices].

Science.gov (United States)

Hiyama, Yukio

2010-01-01

This report describes the roles of Good Manufacturing Practices (GMP) in pharmaceutical product quality control. There are three keys to pharmaceutical product quality control. They are specifications, thorough product characterization during development, and adherence to GMP as the ICH Q6A guideline on specifications provides the most important principles in its background section. Impacts of the revised Pharmaceutical Affairs Law (rPAL) which became effective in 2005 on product quality control are discussed. Progress of ICH discussion for Pharmaceutical Development (Q8), Quality Risk Management (Q9) and Pharmaceutical Quality System (Q10) are reviewed. In order to reconstruct GMP guidelines and GMP inspection system in the regulatory agencies under the new paradigm by rPAL and the ICH, a series of Health Science studies were conducted. For GMP guidelines, product GMP guideline, technology transfer guideline, laboratory control guideline and change control system guideline were written. For the GMP inspection system, inspection check list, inspection memo and inspection scenario were proposed also by the Health Science study groups. Because pharmaceutical products and their raw materials are manufactured and distributed internationally, collaborations with other national authorities are highly desired. In order to enhance the international collaborations, consistent establishment of GMP inspection quality system throughout Japan will be essential.

LIFE CYCLE OF THE PHARMACEUTICAL PRODUCT AND PRIMARY STRATEGIC GOALS

Directory of Open Access Journals (Sweden)

Cristina\tCIOT

2015-12-01

Full Text Available In addition to innovation, production at high standards, market and marketing policy, pharmaceutical companies need strategies that could cope with apparent contradictions, convergences and divergences, centralisation and involution, at the global and local level, focus and liberty, domestic production and external supply, ownership and alliances, networks and hierarchies, science or market orientation, all these being part of the essence of a profitable and expanding pharmaceutical company. Specialists appreciate that the 20 century will remain in the collective memory for its technological achievements, including a better understanding of the atomic structure, „information explosion” encouraged by the progress of the computer technology, the news from space exploration. If one wants to evaluate its importance in terms of impact on people’s lives, the 20 century could be called THE DRUG AREA. Many experts agree that, at the end of this century, pharmaceutical products would have a higher importance for our lives due to the special progress in neurobiology, immunology, molecular biology, cellular differentiation, cell membrane and genetic studies. In the pharmaceutical industry, important funds are directed towards research and development, while few understand and appreciate the contribution brought by the pharmaceutical marketing system and by the professionals in this field. These ones make the drug accessible at the right time and place, in the required quantity, at a reasonable price and with all the information required.

Collaborating to Compete: A Search into Capabilities and Strategic Alliances in the Pharmaceutical Industry

Directory of Open Access Journals (Sweden)

Marisa Ohba

2007-06-01

Full Text Available Athough there is a profusion of studies related to strategic alliances and technological capacities which evaluate the issues individually, there is a scarcity of studies with empirical evidence relative to the implications of strategic alliances at the technological capacity configuration. Drawing on a scrutiny of specialised databases (Galé, Dialog, and Business & Industry covering the 1993-2003 period, this article examines the entry and exit composition of innovative capabilities of 25 pharmaceutical companies’ capabilities involved in such alliances. They are organised in three groups: (i large pharmaceutical companies (‘big-pharma’; (ii large bio-pharmaceutical companies (‘bio-pharma’; and (iii small and research-intensive companies. In terms of strategic alliance implications, a change was observed on the technological capacities’ configuration. The evidence suggests that the criteria for partner choice and technological capacity depend on the objectives and needs of each different group of company. Such type of evidence is important to provide researchers, corporate managers, and policy-makers with a concrete notion of the extent to which such division of innovative labour occurs and the actual changes going on the structure and organisation of innovative activities in the pharmaceutical industry.

Recent applications of Chemical Imaging to pharmaceutical process monitoring and quality control.

Science.gov (United States)

Gowen, A A; O'Donnell, C P; Cullen, P J; Bell, S E J

2008-05-01

Chemical Imaging (CI) is an emerging platform technology that integrates conventional imaging and spectroscopy to attain both spatial and spectral information from an object. Vibrational spectroscopic methods, such as Near Infrared (NIR) and Raman spectroscopy, combined with imaging are particularly useful for analysis of biological/pharmaceutical forms. The rapid, non-destructive and non-invasive features of CI mark its potential suitability as a process analytical tool for the pharmaceutical industry, for both process monitoring and quality control in the many stages of drug production. This paper provides an overview of CI principles, instrumentation and analysis. Recent applications of Raman and NIR-CI to pharmaceutical quality and process control are presented; challenges facing CI implementation and likely future developments in the technology are also discussed.

The Pharmaceutical Industry Beamline of Pharmaceutical Consortium for Protein Structure Analysis

International Nuclear Information System (INIS)

Nishijima, Kazumi; Katsuya, Yoshio

2002-01-01

The Pharmaceutical Industry Beamline was constructed by the Pharmaceutical Consortium for Protein Structure Analysis which was established in April 2001. The consortium is composed of 22 pharmaceutical companies affiliating with the Japan Pharmaceutical Manufacturers Association. The beamline is the first exclusive on that is owned by pharmaceutical enterprises at SPring-8. The specification and equipments of the Pharmaceutical Industry Beamline is almost same as that of RIKEN Structural Genomics Beamline I and II. (author)

The development of Bio-pharmaceutical industry in China: problems and solutions.

Science.gov (United States)

Yan, Gujun

2014-07-01

Known as the "sunrise industry" of the 21st century, bio-pharmaceutical industry has been a fast-growing global industry, and many countries have been developing this industry as the focus of their national economies. In China, there exists a huge market demand for the development of bio-pharmaceutical industry, but at the present stage the industry is faced with some problems, such as low level of R & D for innovative drugs, and inappropriate capital investment in the industrialization. In order to accelerate the development of China's bio-pharmaceutical industry, it is necessary to take strategic initiatives of improving the technology transfer system, developing the bio-pharmaceutical outsourcing, and building a diversified industrial financing system.

[New research on the significance of polymers in pharmaceutical formulations].

Science.gov (United States)

Amighi, K

2001-01-01

During these last few decades, a lot of work has been made in pharmaceutical area in order to control the drug delivery from various pharmaceutical dosage forms. The use of polymers in pharmaceutical technology have led to the development of the first drug delivery systems proposed in order to prolong or to delay the drug delivery, or to enhance drug release for drugs showing bioavailability shortcomings. The wide range of polymers available for pharmaceutical use, their low reactivity towards drugs and other formulation ingredients and their safe nature, have permitted a widespread use of polymers to improve manufacturing processes or for the formulation of pharmaceutical dosage forms for various administration routes. More over, the preparation of new polymeric materials by the synthesis of new polymers with unique properties or by the modification of available natural or synthetic polymers, offer to the formulator a wide range of applications in order to optimise the drug delivery for each specific case.

The Effects of Technology Entrepreneurship on Customers and Society: A Case Study of a Spanish Pharmaceutical Distribution Company.

Science.gov (United States)

Muñoz, Rosa M; Sánchez de Pablo, Jesús D; Peña, Isidro; Salinero, Yolanda

2016-01-01

The main purpose of this paper is to provide an understanding, within the field of corporate entrepreneurship, of the various factors that enable technology entrepreneurship in established firms and its principal effects on customers and society. The paper reports on a case study regarding technology entrepreneurship in a Spanish company whose activity is pharmaceutical distribution. This company has been able to overcome the consequences of the worldwide crisis and start an innovative process which includes the installation of new information technology (IT) and an investment of 6 million Euros. It is, in this respect, a model to imitate and the objective of this paper is therefore to discover the managers' entrepreneurial orientation (EO) characteristics which have made this possible, along with the organizational and social effects resulting from the process. We verify that EO is present in this company and that the development of new IT has important effects on customers and the population.

The Effects of Technology Entrepreneurship on Customers and Society: A Case Study of a Spanish Pharmaceutical Distribution Company

Science.gov (United States)

Muñoz, Rosa M.; Sánchez de Pablo, Jesús D.; Peña, Isidro; Salinero, Yolanda

2016-01-01

The main purpose of this paper is to provide an understanding, within the field of corporate entrepreneurship, of the various factors that enable technology entrepreneurship in established firms and its principal effects on customers and society. The paper reports on a case study regarding technology entrepreneurship in a Spanish company whose activity is pharmaceutical distribution. This company has been able to overcome the consequences of the worldwide crisis and start an innovative process which includes the installation of new information technology (IT) and an investment of 6 million Euros. It is, in this respect, a model to imitate and the objective of this paper is therefore to discover the managers’ entrepreneurial orientation (EO) characteristics which have made this possible, along with the organizational and social effects resulting from the process. We verify that EO is present in this company and that the development of new IT has important effects on customers and the population. PMID:27445938

The Future of Pharmaceutical Manufacturing Sciences

DEFF Research Database (Denmark)

Rantanen, Jukka; Khinast, Johannes

2015-01-01

The entire pharmaceutical sector is in an urgent need of both innovative technological solutions and fundamental scientific work, enabling the production of highly engineered drug products. Commercial-scale manufacturing of complex drug delivery systems (DDSs) using the existing technologies...... is challenging. This review covers important elements of manufacturing sciences, beginning with risk management strategies and design of experiments (DoE) techniques. Experimental techniques should, where possible, be supported by computational approaches. With that regard, state-of-art mechanistic process...... control solutions. Last part of the review addresses future manufacturing solutions, covering continuous processing and, specifically, hot-melt processing and printing-based technologies. Finally, challenges related to implementing these technologies as a part of future health care systems are discussed....

Assessing the Factors Associated With Iran's Intra-Industry Trade in Pharmaceuticals.

Science.gov (United States)

Yusefzadeh, Hassan; Hadian, Mohammad; Abolghasem Gorji, Hassan; Ghaderi, Hossein

2015-03-30

Pharmaceutical industry is a sensitive and profitable industry. If this industry wants to survive, it should be able to compete well in international markets. So, study of Iran's intra-industry trade (IIT) in pharmaceuticals is essential in order to identify competitiveness potential of country and boost export capability in the global arena. This study assessed the factors associated with Iran's intra-industry trade in pharmaceuticals with the rest of the world during the 2001-2012 periods using seasonal time series data at the four-digit SITC level. The data was collected from Iran's pharmaceutical Statistics, World Bank and International Trade Center. Finally, we discussed a number of important policy recommendations to increase Iran's IIT in pharmaceuticals. The findings indicated that economies of scale, market structure and degree of economic development had a significantly positive impact on Iran's intra-industry trade in pharmaceuticals and tariff trade barriers were negatively related to IIT. Product differentiation and technological advancement didn't have the expected signs. In addition, we found that Iran's IIT in pharmaceuticals have shown an increasing trend during the study period. Thus, the composition of Iran trade in pharmaceuticals has changed from inter-industry trade to intra-industry trade. In order to get more prepared for integration into the global economy, the development of Iran's IIT in pharmaceuticals should be given priority. Therefore, paying attention to IIT could have an important role in serving pharmaceutical companies in relation to pharmaceutical trade.

The transparency of published health technology assessment-based recommendations on pharmaceutical reimbursement in Poland.

Science.gov (United States)

Bochenek, Tomasz; Kocot, Ewa; Rodzinka, Marcin; Godman, Brian; Maciejewska, Katarzyna; Kamal, Susan; Pilc, Andrzej

2017-08-01

The appropriate access to public information is very important for healthcare system stakeholders. The goal of this study was to examine how the execution of the formally existing right to public information on the HTA-based recommendations on reimbursement of new health technologies from public funds has been changing in Poland. All recommendations published within two predefined equal periods of time between 2013 and 2015 were analyzed. The gathered data was subjected to statistical analysis. The frequency and intensity of censoring the published HTA-based recommendations on the pharmaceutical reimbursement has diminished. The text readability and clarity of message has improved, although the degree of decisiveness of the recommendations has dropped. The positive changes in the public communication policy should be continued. The transparency of the HTA-based recommendations should be increased further in some areas in the future.

Effective executive management in the pharmaceutical industry.

Science.gov (United States)

Tran, Hoang; Kleiner, Brian H

2005-01-01

Along with the boom in information technology and vast development in genomic and proteomic discoveries, the pharmaceutical and biotech industries have been provided the means and tools to create a new page in medicinal history. They are now able to alter the classic ways to cure complex diseases thanks to the completion of the human genome project. To be able to compete in this industry, pharmaceutical management has to be effective not only internally but also externally in socially acceptable conduct. The first department that requires focus is marketing and sales. As the main driving force to increase revenues and profits, marketing and sales employees should be highly motivated by compensation. Also, customer relationships should be maintained for long-term gain. As important as marketing, research and development requires the financial support as well as the critical decision making to further expand the product pipeline. Similarly, finance and technologies should be adequately monitored and invested to provide support as well as prepare for future expansion. On top of that, manufacturing processes and operations are operated per quality systems and FDA guidelines to ensure high quality. Human Resources, on the other hand, should carry the managing and motivation from upper management through systematic recruitment, adequate training, and fair compensation. Moreover, effective management in a pharmaceutical would also require the social welfare and charity to help patients who cannot afford the treatment as well as improving the organization's image. Last but not least, the management should also prepare for the globalization of the industry. Inevitably, large pharmaceutical companies are merging with each other or acquiring smaller companies to enhance the competitive advantages as well as expand their product mix. For effectiveness in a pharmaceutical industry, management should focus more than just the daily routine tasks and short-term goals. Rather, they

Pharmaceutical product development: A quality by design approach

Science.gov (United States)

Pramod, Kannissery; Tahir, M. Abu; Charoo, Naseem A.; Ansari, Shahid H.; Ali, Javed

2016-01-01

The application of quality by design (QbD) in pharmaceutical product development is now a thrust area for the regulatory authorities and the pharmaceutical industry. International Conference on Harmonization and United States Food and Drug Administration (USFDA) emphasized the principles and applications of QbD in pharmaceutical development in their guidance for the industry. QbD attributes are addressed in question-based review, developed by USFDA for chemistry, manufacturing, and controls section of abbreviated new drug applications. QbD principles, when implemented, lead to a successful product development, subsequent prompt regulatory approval, reduce exhaustive validation burden, and significantly reduce post-approval changes. The key elements of QbD viz., target product quality profile, critical quality attributes, risk assessments, design space, control strategy, product lifecycle management, and continual improvement are discussed to understand the performance of dosage forms within design space. Design of experiments, risk assessment tools, and process analytical technology are also discussed for their role in QbD. This review underlines the importance of QbD in inculcating science-based approach in pharmaceutical product development. PMID:27606256

Pharmaceutical product development: A quality by design approach.

Science.gov (United States)

Pramod, Kannissery; Tahir, M Abu; Charoo, Naseem A; Ansari, Shahid H; Ali, Javed

2016-01-01

The application of quality by design (QbD) in pharmaceutical product development is now a thrust area for the regulatory authorities and the pharmaceutical industry. International Conference on Harmonization and United States Food and Drug Administration (USFDA) emphasized the principles and applications of QbD in pharmaceutical development in their guidance for the industry. QbD attributes are addressed in question-based review, developed by USFDA for chemistry, manufacturing, and controls section of abbreviated new drug applications. QbD principles, when implemented, lead to a successful product development, subsequent prompt regulatory approval, reduce exhaustive validation burden, and significantly reduce post-approval changes. The key elements of QbD viz., target product quality profile, critical quality attributes, risk assessments, design space, control strategy, product lifecycle management, and continual improvement are discussed to understand the performance of dosage forms within design space. Design of experiments, risk assessment tools, and process analytical technology are also discussed for their role in QbD. This review underlines the importance of QbD in inculcating science-based approach in pharmaceutical product development.

Pharmaceutical drugs, WWTP, and hydric bodies

Directory of Open Access Journals (Sweden)

Quezia Bezerra Cass

2007-12-01

Full Text Available In the last decade, special attention has been given to the presence of pharmaceutical compounds in the aquatic environment; once that the continuous supply and persistence of these substances can be severally prejudicial to the biota. Thus, the development and application of new technologies that allows the removal or diminishes these contaminants has been the focus of the environment sanitation area. However, the absence of specific monitoring programs at the waste water treatment plant (WWTP, unfeasibly the behaviour evaluation of pharmaceutical drugs in the installed plants. The aim work, based on the factors involved in the input of these contaminants in the environment, and take attention to the pathway in the implementation of adequate treatment systems to minimize the deterioration of the aquatic ecosystems.

Pharmaceutical Applications of Polymeric Nano materials

International Nuclear Information System (INIS)

Wu, L.; Sun, L.

2011-01-01

With significant attention focused on nano science and nano technology in recent years, nano materials have been used in a wide variety of applications such as automotive, environmental, energy, catalysis, biomedical, drug delivery, and polymeric industries. Among those fields, the application of nano materials with pharmaceutical science is an emerging and rapidly growing field and has drawn increasing attention recently. Research and development in this field is mainly focused on several aspects such as the discoveries of novel functional nano materials, exploration on nanoparticles with controlled and targeted drug delivery characteristics, and investigation of bio functionalized and diagnostic nano materials. In this special issue, we have invited a few papers related to recent advances in pharmaceutical application of polymeric nano materials

Development of Problem Sets for K-12 and Engineering on Pharmaceutical Particulate Systems

Science.gov (United States)

Savelski, Mariano J.; Slater, C. Stewart; Del Vecchio, Christopher A.; Kosteleski, Adrian J.; Wilson, Sarah A.

2010-01-01

Educational problem sets have been developed on structured organic particulate systems (SOPS) used in pharmaceutical technology. The sets present topics such as particle properties and powder flow and can be integrated into K-12 and college-level curricula. The materials educate students in specific areas of pharmaceutical particulate processing,…

Removal of Pharmaceuticals from Wastewater by Intermittent Electrocoagulation

Directory of Open Access Journals (Sweden)

Benny Marie B. Ensano

2017-01-01

Full Text Available The continuous release of emerging contaminants (ECs in the aquatic environment, as a result of the inadequate removal by conventional treatment methods, has prompted research to explore viable solutions to this rising global problem. One promising alternative is the use of electrochemical processes since they represent a simple and highly efficient technology with less footprint. In this paper, the feasibility of treating ECs (i.e., pharmaceuticals using an intermittent electrocoagulation process, a known electrochemical technology, has been investigated. Diclofenac (DCF, carbamazepine (CBZ and amoxicillin (AMX were chosen as being representative of highly consumed drugs that are frequently detected in our water resources and were added in synthetic municipal wastewater. The removal efficiencies of both individual and combined pharmaceuticals were determined under different experimental conditions: hydraulic retention time (HRT (6, 19 and 38 h, initial concentration (0.01, 4 and 10 mg/L and intermittent application (5 min ON/20 min OFF of current density (0.5, 1.15 and 1.8 mA/cm2. Results have shown that these parameters have significant effects on pharmaceutical degradation. Maximum removals (DCF = 90%, CBZ = 70% and AMX = 77% were obtained at a current density of 0.5 mA/cm2, an initial concentration of 10 mg/L and HRT of 38 h.

Using information technology for an improved pharmaceutical care delivery in developing countries. Study case: Benin.

Science.gov (United States)

Edoh, Thierry Oscar; Teege, Gunnar

2011-10-01

One of the problems in health care in developing countries is the bad accessibility of medicine in pharmacies for patients. Since this is mainly due to a lack of organization and information, it should be possible to improve the situation by introducing information and communication technology. However, for several reasons, standard solutions are not applicable here. In this paper, we describe a case study in Benin, a West African developing country. We identify the problem and the existing obstacles for applying standard ECommerce solutions. We develop an adapted system approach and describe a practical test which has shown that the approach has the potential of actually improving the pharmaceutical care delivery. Finally, we consider the security aspects of the system and propose an organizational solution for some specific security problems.

Prospective of Transformation of Current Models of the Global Pharmaceutical Market

Directory of Open Access Journals (Sweden)

Yuriy Solodkovskyy

2012-02-01

Full Text Available This article thoroughly analyzes the current state of the global pharmaceutical market, defines the key factors for its development and outlines the promising areas of transformation of existing business models of top companies. The forecasted data relating to the market development until 2015 have been investigated. The global, market, technological and organizational factors of transformation of modern model of the global pharmaceutical market have been identified.

Three-dimensional printing in pharmaceutics: promises and problems.

Science.gov (United States)

Yu, Deng Guang; Zhu, Li-Min; Branford-White, Christopher J; Yang, Xiang Liang

2008-09-01

Three-dimensional printing (3DP) is a rapid prototyping (RP) technology. Prototyping involves constructing specific layers that uses powder processing and liquid binding materials. Reports in the literature have highlighted the many advantages of the 3DP system over other processes in enhancing pharmaceutical applications, these include new methods in design, development, manufacture, and commercialization of various types of solid dosage forms. For example, 3DP technology is flexible in that it can be used in applications linked to linear drug delivery systems (DDS), colon-targeted DDS, oral fast disintegrating DDS, floating DDS, time controlled, and pulse release DDS as well as dosage form with multiphase release properties and implantable DDS. In addition 3DP can also provide solutions for resolving difficulties relating to the delivery of poorly water-soluble drugs, peptides and proteins, preparation of DDS for high toxic and potent drugs and controlled-release of multidrugs in a single dosage forms. Due to its flexible and highly reproducible manufacturing process, 3DP has some advantages over conventional compressing and other RP technologies in fabricating solid DDS. This enables 3DP to be further developed for use in pharmaceutics applications. However, there are some problems that limit the further applications of the system, such as the selections of suitable excipients and the pharmacotechnical properties of 3DP products. Further developments are therefore needed to overcome these issues where 3DP systems can be successfully combined with conventional pharmaceutics. Here we present an overview and the potential 3DP in the development of new drug delivery systems.

Radiation sterilization of some pharmaceutical preparations and medical products

International Nuclear Information System (INIS)

Tashmetov, M.Yu.; Makhkamov, Sh.M.; Urinov, Sh.S.; Turaev, A.S.; Sultanov, M.S.; Inagomov, Kh.S.

2006-01-01

Full text: In connection with intensive development of pharmacology and medical techniques, use of the products contacting to blood, with the internal environment of an organism, with wound surface, with mucous membranes and skin there were high requirements to sterility of pharmaceutical preparations and medical products. Traditional methods of sterilization (heat treatment, gas processing and processing the ferry) have some restrictions in application, and not insufficient degree of sterilization required for pharmaceutical preparations and medical products. Thermal processing can lead to degradation of structure (medicine), mechanical changes and loss of medical properties. Besides, it is impossible to carry out sterilization of many pharmaceutical preparations by a method of heat treatment. Sterilization of products in packing is very complicated, because sterilization temperature of packing and a product is different. Gas processing is basically applied to sterilization of medical products (syringes, bandage, cotton wools, etc.). However, the degree of sterility is low, because of rather low ability and heterogeneity of sterilizing substance. Sterilization in packing represents special difficulty and demands additional charges related with delivery of the purified gas from abroad. Last years alongside with known technological methods of sterilization of medical products and pharmaceutical preparations radiating methods of processing have found wide application. Use of electronic bunches with the moderate energy and various isotopes became a basis for formation and development of a new direction in the medicine, called by 'radiation sterilization'. The radiation technology is highly harmless and economic, not polluting substance and surrounding space. Unlike the specified traditional methods, radiating processing of products by the isotope 60 Co, radiating the gamma quantum, has unique opportunities - high penetrability in substance, providing uniformity of

Operational Aspects of Continuous Pharmaceutical Production

DEFF Research Database (Denmark)

Mitic, Aleksandar

Introduction of the Process Analytical Technolo gy (PAT) Initiative, the Quality by Design (QbD) approach and the Continuous Improvement (CI) methodology/philosophy is considered as a huge milestone in the modern pharmaceutical indust ry. The above concepts, when applied to a pharmaceutical...... satisfaction of the demands defined by the PA T Initiative. This approach could be considered as establishing a Lean Production System (LPS) whic h is usually supported with tools associated with Process Intensifaction (PI) a nd Process Optimization (PO). Development of continuous processes is often c onnected...... tools, such as microwave assisted organic synthesis (MAOS), ultrasounds, meso-scale flow chemistry and microprocess technology. Furthermore, developmen t of chemical catalysts and enzymes enabled further acceleration of some chemical reactions that were known as very slow or impossible to be performed...

Non-linear optical imaging – Introduction and pharmaceutical applications

NARCIS (Netherlands)

Fussell, A.L.; Isomaki, Antti; Strachan, Clare J.

2013-01-01

Nonlinear optical imaging is an emerging technology with much potential in pharmaceutical analysis. The technique encompasses a range of optical phenomena, including coherent anti-Stokes Raman scattering (CARS), second harmonic generation (SHG), and twophoton excited fluorescence (TPEF). The

Using design science research to develop online enhanced pharmaceutical care services.

Science.gov (United States)

Lapão, Luís Velez; Gregório, João; Mello, Diogo; Cavaco, Afonso; Mira Da Silva, Miguel; Lovis, Christian

2014-01-01

The ePharmaCare project aims at assessing the potential of eHealth services for the provision of pharmaceutical services interacting actively with patients. The results presented here focus on the first three steps of Design Science Research Methodology. A mixed methods approach was used with an online survey to collect data on use of information technologies in community pharmacy, followed by an exploratory observational time and business processes study, which use the shadowing method to identify and assess the opportunity to lunch online services. Combining this with the Service Experiment Blueprint and the Dáder method an enhanced pharmaceutical service was designed. Next, an artifact is developed and a prototype is implemented to demonstrate the value of online pharmaceutical services' delivery. This new service could represent a new perspective for pharmaceutical services integration within the health system.

Quality in the pharmaceutical industry - A literature review.

Science.gov (United States)

Haleem, Reham M; Salem, Maissa Y; Fatahallah, Faten A; Abdelfattah, Laila E

2015-10-01

The aim of this study is to:a.Highlight the most important guidelines and practices of quality in the pharmaceutical industry.b.Organize such guidelines and practices to create a guide to pave the way for other researchers who would like to dig deeper into these guidelines and practices. A review was conducted of 102 publications; 56 publications were concerned with the pharmaceutical quality directly while 46 publications were concerned with the general quality practices. The content of those sources was analyzed and the following themes were identified:a.Research theme 1: Guidelines of the pharmaceutical quality.b.Research theme 2: General practices recently applied in the pharmaceutical industry. The following guidelines were identified and reviewed: WHO guidelines, FDA guidelines, EU guidelines and ICH guidelines in the research theme I. In research theme II; the following topics were identified and reviewed: quality risk management, quality by design, corrective actions and preventive actions, process capability analysis, Six Sigma, process analytical technology, lean manufacturing, total quality management, ISO series and HACCP. Upon reviewing the previously highlighted guidelines and the practices that are widely applied in the pharmaceutical industry, it was noticed that there is an abundant number of papers and articles that explain the general guidelines and practices but the literature lack those describing application; case studies of the pharmaceutical factories applying those guidelines and significance of those guidelines and practices. It is recommended that the literature would invest more in the area of application and significance of guidelines and practices. New case studies should be done to prove the feasibility of such practices.

[E-commerce of pharmaceuticals].

Science.gov (United States)

Shani, Segev

2003-05-01

The emergence of the Internet as a new communications and information technology caused major social and cultural changes. The dramatic increase in accessibility and availability of information empowered the consumer by closing the information gap between the consumer and different suppliers. The objective of this article is to review many new internet-supported applications related to the pharmaceutical market. E-commerce is divided into two major components: Business to Consumer (B to C), and Business to Business (B to B). The main applications in B to C are dissemination of medical and drug information, and the sale of drugs through the Internet. Medical information on the Internet is vast and very helpful for patients, however, its reliability is not guaranteed. Online pharmacies increase the accessibility and availability of drugs. Nevertheless, several obstacles such as security of the data provided (both financial and clinical) prevent the widespread use of online pharmacies. Another risk is the health authorities' inability to regulate Internet sites effectively. Therefore, unregulated sale of prescription drugs, fake or substandard, often occurs on the Internet. B to B relates to physicians, clinics, hospitals, HMO's and pharmaceutical companies. There is a vast number of applications ranging from clinical research, marketing and sales promotion, to drug distribution and logistics. In conclusion, the Internet is dynamic and has contributed to the development of numerous new applications in the field of pharmaceuticals. Regulatory authorities should be active in developing new policies that will deal with those new Internet-based applications.

Standardized reporting for rapid relative effectiveness assessments of pharmaceuticals.

Science.gov (United States)

Kleijnen, Sarah; Pasternack, Iris; Van de Casteele, Marc; Rossi, Bernardette; Cangini, Agnese; Di Bidino, Rossella; Jelenc, Marjetka; Abrishami, Payam; Autti-Rämö, Ilona; Seyfried, Hans; Wildbacher, Ingrid; Goettsch, Wim G

2014-11-01

Many European countries perform rapid assessments of the relative effectiveness (RE) of pharmaceuticals as part of the reimbursement decision making process. Increased sharing of information on RE across countries may save costs and reduce duplication of work. The objective of this article is to describe the development of a tool for rapid assessment of RE of new pharmaceuticals that enter the market, the HTA Core Model® for Rapid Relative Effectiveness Assessment (REA) of Pharmaceuticals. Eighteen member organisations of the European Network of Health Technology Assessment (EUnetHTA) participated in the development of the model. Different versions of the model were developed and piloted in this collaboration and adjusted accordingly based on feedback on the content and feasibility of the model. The final model deviates from the traditional HTA Core Model® used for assessing other types of technologies. This is due to the limited scope (strong focus on RE), the timing of the assessment (just after market authorisation), and strict timelines (e.g. 90 days) required for performing the assessment. The number of domains and assessment elements was limited and it was decided that the primary information sources should preferably be a submission file provided by the marketing authorisation holder and the European Public Assessment Report. The HTA Core Model® for Rapid REA (version 3.0) was developed to produce standardised transparent RE information of pharmaceuticals. Further piloting can provide input for possible improvements, such as further refining the assessment elements and new methodological guidance on relevant areas.

Assessing the Factors Associated With Iran’s Intra-Industry Trade in Pharmaceuticals

Science.gov (United States)

Yusefzadeh, Hassan; Hadian, Mohammad; Gorji, Hassan Abolghasem; Ghaderi, Hossein

2015-01-01

Background: Pharmaceutical industry is a sensitive and profitable industry. If this industry wants to survive, it should be able to compete well in international markets. So, study of Iran’s intra-industry trade (IIT) in pharmaceuticals is essential in order to identify competitiveness potential of country and boost export capability in the global arena. Methods: This study assessed the factors associated with Iran’s intra-industry trade in pharmaceuticals with the rest of the world during the 2001–2012 periods using seasonal time series data at the four-digit SITC level. The data was collected from Iran’s pharmaceutical Statistics, World Bank and International Trade Center. Finally, we discussed a number of important policy recommendations to increase Iran’s IIT in pharmaceuticals. Results: The findings indicated that economies of scale, market structure and degree of economic development had a significantly positive impact on Iran’s intra-industry trade in pharmaceuticals and tariff trade barriers were negatively related to IIT. Product differentiation and technological advancement didn’t have the expected signs. In addition, we found that Iran’s IIT in pharmaceuticals have shown an increasing trend during the study period. Thus, the composition of Iran trade in pharmaceuticals has changed from inter-industry trade to intra-industry trade. Conclusions: In order to get more prepared for integration into the global economy, the development of Iran’s IIT in pharmaceuticals should be given priority. Therefore, paying attention to IIT could have an important role in serving pharmaceutical companies in relation to pharmaceutical trade. PMID:26156931

Continuous flow technology vs. the batch-by-batch approach to produce pharmaceutical compounds.

Science.gov (United States)

Cole, Kevin P; Johnson, Martin D

2018-01-01

For the manufacture of small molecule drugs, many pharmaceutical innovator companies have recently invested in continuous processing, which can offer significant technical and economic advantages over traditional batch methodology. This Expert Review will describe the reasons for this interest as well as many considerations and challenges that exist today concerning continuous manufacturing. Areas covered: Continuous processing is defined and many reasons for its adoption are described. The current state of continuous drug substance manufacturing within the pharmaceutical industry is summarized. Current key challenges to implementation of continuous manufacturing are highlighted, and an outlook provided regarding the prospects for continuous within the industry. Expert commentary: Continuous processing at Lilly has been a journey that started with the need for increased safety and capability. Over twelve years the original small, dedicated group has grown to more than 100 Lilly employees in discovery, development, quality, manufacturing, and regulatory designing in continuous drug substance processing. Recently we have focused on linked continuous unit operations for the purpose of all-at-once pharmaceutical manufacturing, but the technical and business drivers that existed in the very beginning for stand-alone continuous unit operations in hybrid processes have persisted, which merits investment in both approaches.

PHARMACEUTICALS AND PERSONAL CARE PRODUCTS ...

Science.gov (United States)

Modern sanitary practices result in large volumes of human waste, as well as domestic and industrial sewage, being collected and treated at common collection points, wastewater treatment plants (WWTP). In recognition of the growing use of sewage sludges as a fertilizers and as soilamendments, and the scarcity of current data regarding the chemical constituents in sewage sludges, the United States National Research Council (NRC) in 2002 produced a report on sewage sludges. Among the NRC's recommendations was the need for investigating the occurrence of pharmaceuticals and personal care products (PPCPs) in sewage sludges. PPCPsare a diverse array of non-regulated contaminants that had not been studied in previous sewage sludges surveys but which are likely to be present. The focus of this paper will be to review the current analytical methodologies available for investigating whether pharmaceuticals are present in WWTP-produced sewage sludges, to summarize current regulatory practices regarding sewage sludges, and to report on the presence of pharmaceuticals in sewage sludges. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subta

INAA of polyacrylic hydrogels of pharmaceutical grade

International Nuclear Information System (INIS)

Ponta, C.; Salagean, M.; Pantelica, A.; Georgescu, I.I.

1998-01-01

Polyacrylic acid (PA) and its salts are promising biomaterials used in the pharmaceutical industry. They could be used as pharmaceutical additives, as a burn dressing and also in the slow released implants or trans-derma patch formulations. Polyacrylic acid of pharmaceutical grade can be obtained by gamma irradiation polymerization. The influence of the raw materials and of the technological procedure on the final product purity has been investigated by Instrumental Neutron Activation Analysis (INAA) method. The following materials have been analyzed by INAA: 1) acrylic acid of technical grade; 2) acrylic acid purified by double crystallisation; 3) NaOH of analytical grade; 4) CaCl-2·6H 2 O of pharmaceutical grade; 5) CaCl 2 ·2H 2 O of analytical grade; 6) granulated PANa; 7) ungranulated PANa; 8) ungranulated PANaCa; 9) PANaCa granulated by milling in IFIN-HH using the mill nr. 1; 10) PANaCa granulated by milling in Institute of Chemical and Pharmaceutical Research (ICPR); 11) PANaCa granulated by milling in IFIN-HH using the mill nr. 2. The first five samples, marked from 1 to 5, are raw materials and the other six samples, marked from 6 to 11, are the final polyacrylic structures processed by various technological procedures. The samples together with the appropriate reference materials have been irradiated at WWR-S reactor in a neutron flux of 2.5·10 12 cm -2 s -1 and the induced radioactivity was registered by a HPGe detector (EG/G ORTEC) of 30% efficiency and 2.1 keV resolution. The concentrations of As, Br, Ce, Co, Cr, Fe, La, Sb, Sc, Zn have been determined. For the final polyacrylic structures, except for granulated PANa (sample 6), only the elements Co, Cr, Fe, Sc, Zn were found at the following concentration levels: tens of ppm (Co), ppm (Zn), hundreds of ppb (Cr), tens of ppb (Co), ppb (Co, Sc), 10 -1 ppb (Sc). In the granulated PANa, in comparison with the other analyzed final products, similar concentration values were found for Fe, Sc and Zn

Mitigating pharmaceutical waste exposures: policy and program considerations.

Science.gov (United States)

Amster, Eric D

2016-01-01

Pharmaceutical disposal and the environmental fate of medication metabolites directly impacts the public's health in two significant ways: accidental medication ingestion of pharmaceuticals that were not disposed of properly results in inadvertent toxicity; and environmental health consequences of pharmaceuticals that were inappropriately disposed and which contaminate municipal water supply. In reviewing the effectiveness of medication disposal policy globally, it is crucial to not only determine which policies are effective but also to assess why they are effective. By assessing the root causes for a specific policy's effectiveness it can be determined if those successes could be translated to another country with a different health care system, unique culture and divergent policy ecosystem. Any intervention regarding pharmaceutical disposal would require a multifaceted approach beyond raising awareness and coordinating pharmaceutical disposal on a national level. While consumer participation is important, effective primary prevention would also include research on drug development that is designed to biodegrade in the environment as opposed to medications that persist and accumulate in the natural environment even when properly disposed. Countries that lack a nationalized disposal policy should leverage the resources and infrastructure already in place in the national health care system to implement a unified policy to address medication disposal in the short-term. In tandem, efforts should be made to recruit the biotechnology sector in high-tech and academia to develop new technologies in medication design and water filtration to decrease exposures in the long-term.

Does brand differentiate pharmaceuticals?

Science.gov (United States)

Bednarik, Josef

2005-12-01

Role of marketing in pharmaceutical industry is increasing and inspiration by successful brands known from consumer goods market influenced pharmaceutical companies enough to switch their attention to branding initiatives. Still there is little evidence that pharmaceutical brands represent anything more than product only. This study aims to explore the area of branding in pharmaceutical industry. Central hypothesis of the research has been that brand and its emotional content differentiate pharmaceuticals as well as rational data derived from clinical studies. It has been tested by extensive review of available literature as well as by primary research focused on drivers of physicians' attitudes towards products and their influence on prescribing behavior. The research has been conducted in the sample of psychiatrists in the Czech Republic. No evidence about pharmaceutical brand exceeding value of product has been found in reviewed literature. Nevertheless, the primary research conducted in the sample of Czech psychiatrists indicates that emotional brand in pharmaceutical industry exists and enables author to draw a model of Customer/product life cycle that describes likely impact of functional, emotional and self-expressive benefits throughout pharmaceutical product's market presence. Pharmaceutical brand is likely to develop differently than the same of consumer goods products--it seems to be built predominantly on long-term positive experience. Marketing role in this process should lie in finding relevant product position and building brand identity compliant with real product capabilities.

Pharmaceutical manufacturing facility discharges can substantially increase the pharmaceutical load to U.S. wastewaters

Science.gov (United States)

Scott, Tia-Marie; Phillips, Patrick J.; Kolpin, Dana W.; Colella, Kaitlyn M.; Furlong, Edward T.; Foreman, William T.; Gray, James L.

2018-01-01

Discharges from pharmaceutical manufacturing facilities (PMFs) previously have been identified as important sources of pharmaceuticals to the environment. Yet few studies are available to establish the influence of PMFs on the pharmaceutical source contribution to wastewater treatment plants (WWTPs) and waterways at the national scale. Consequently, a national network of 13 WWTPs receiving PMF discharges, six WWTPs with no PMF input, and one WWTP that transitioned through a PMF closure were selected from across the United States to assess the influence of PMF inputs on pharmaceutical loading to WWTPs. Effluent samples were analyzed for 120 pharmaceuticals and pharmaceutical degradates. Of these, 33 pharmaceuticals had concentrations substantially higher in PMF-influenced effluent (maximum 555,000 ng/L) compared to effluent from control sites (maximum 175 ng/L). Concentrations in WWTP receiving PMF input are variable, as discharges from PMFs are episodic, indicating that production activities can vary substantially over relatively short (several months) periods and have the potential to rapidly transition to other pharmaceutical products. Results show that PMFs are an important, national-scale source of pharmaceuticals to the environment.

Buddhism and neuroethics: the ethics of pharmaceutical cognitive enhancement.

Science.gov (United States)

Fenton, Andrew

2009-08-01

This paper integrates some Buddhist moral values, attitudes and self-cultivation techniques into a discussion of the ethics of cognitive enhancement technologies - in particular, pharmaceutical enhancements. Many Buddhists utilize meditation techniques that are both integral to their practice and are believed to enhance the cognitive and affective states of experienced practitioners. Additionally, Mahāyāna Buddhism's teaching on skillful means permits a liberal use of methods or techniques in Buddhist practice that yield insight into our selfnature or aid in alleviating or eliminating duhkha (i.e. dissatisfaction). These features of many, if not most, Buddhist traditions will inform much of the Buddhist assessment of pharmaceutical enhancements offered in this paper. Some Buddhist concerns about the effects and context of the use of pharmaceutical enhancements will be canvassed in the discussion. Also, the author will consider Buddhist views of the possible harms that may befall human and nonhuman research subjects, interference with a recipient's karma, the artificiality of pharmaceutical enhancements, and the possible motivations or intentions of healthy individuals pursuing pharmacological enhancement. Perhaps surprisingly, none of these concerns will adequately ground a reflective Buddhist opposition to the further development and continued use of pharmaceutical enhancements, either in principle or in practice. The author argues that Buddhists, from at least certain traditions - particularly Mahāyāna Buddhist traditions - should advocate the development or use of pharmaceutical enhancements if a consequence of their use is further insight into our self-nature or the reduction or alleviation of duhkha.

Pharmaceutical drugs, WWTP, and hydric bodies

OpenAIRE

Quezia Bezerra Cass; Eny Maria Vieira; Juliana Cristina Barreiro; Ricardo Wagner Reis Filho

2007-01-01

In the last decade, special attention has been given to the presence of pharmaceutical compounds in the aquatic environment; once that the continuous supply and persistence of these substances can be severally prejudicial to the biota. Thus, the development and application of new technologies that allows the removal or diminishes these contaminants has been the focus of the environment sanitation area. However, the absence of specific monitoring programs at the waste water treatment plant (WW...

In-line Raman spectroscopic monitoring and feedback control of a continuous twin-screw pharmaceutical powder blending and tableting process.

Science.gov (United States)

Nagy, Brigitta; Farkas, Attila; Gyürkés, Martin; Komaromy-Hiller, Szofia; Démuth, Balázs; Szabó, Bence; Nusser, Dávid; Borbás, Enikő; Marosi, György; Nagy, Zsombor Kristóf

2017-09-15

The integration of Process Analytical Technology (PAT) initiative into the continuous production of pharmaceuticals is indispensable for reliable production. The present paper reports the implementation of in-line Raman spectroscopy in a continuous blending and tableting process of a three-component model pharmaceutical system, containing caffeine as model active pharmaceutical ingredient (API), glucose as model excipient and magnesium stearate as lubricant. The real-time analysis of API content, blend homogeneity, and tablet content uniformity was performed using a Partial Least Squares (PLS) quantitative method. The in-line Raman spectroscopic monitoring showed that the continuous blender was capable of producing blends with high homogeneity, and technological malfunctions can be detected by the proposed PAT method. The Raman spectroscopy-based feedback control of the API feeder was also established, creating a 'Process Analytically Controlled Technology' (PACT), which guarantees the required API content in the produced blend. This is, to the best of the authors' knowledge, the first ever application of Raman-spectroscopy in continuous blending and the first Raman-based feedback control in the formulation technology of solid pharmaceuticals. Copyright © 2017 Elsevier B.V. All rights reserved.

[Pharmaceutical logistic in turnover of pharmaceutical products of Azerbaijan].

Science.gov (United States)

Dzhalilova, K I

2009-11-01

Development of pharmaceutical logistic system model promotes optimal strategy for pharmaceutical functioning. The goal of such systems is organization of pharmaceutical product's turnover in required quantity and assortment, at preset time and place, at a highest possible degree of consumption readiness with minimal expenses and qualitative service. Organization of the optimal turnover chain in the region is offered to start from approximate classification of medicaments by logistic characteristics. Supplier selection was performed by evaluation of timeliness of delivery, quality of delivered products (according to the minimum acceptable level of quality) and time-keeping of time spending for orders delivery.

Characteristics of physicians targeted by the pharmaceutical industry to participate in e-detailing.

Science.gov (United States)

Alkhateeb, Fadi M; Khanfar, Nile M; Doucette, William R; Loudon, David

2009-01-01

Electronic detailing (e-detailing) has been introduced in the last few years by the pharmaceutical industry as a new communication channel through which to promote pharmaceutical products to physicians. E-detailing involves using digital technology, such as Internet, video conferencing, and interactive voice response, by which drug companies target their marketing efforts toward specific physicians with pinpoint accuracy. A mail survey of 671 Iowa physicians was used to gather information about the physician characteristics and practice setting characteristics of those who are usually targeted by pharmaceutical companies to participate in e-detailing. A model is developed and tested to explain firms' targeting strategy for targeting physicians for e-detailing.

Advances in NSAID development: evolution of diclofenac products using pharmaceutical technology.

Science.gov (United States)

Altman, Roy; Bosch, Bill; Brune, Kay; Patrignani, Paola; Young, Clarence

2015-05-01

Diclofenac is a nonsteroidal anti-inflammatory drug (NSAID) of the phenylacetic acid class with anti-inflammatory, analgesic, and antipyretic properties. Contrary to the action of many traditional NSAIDs, diclofenac inhibits cyclooxygenase (COX)-2 enzyme with greater potency than it does COX-1. Similar to other NSAIDs, diclofenac is associated with serious dose-dependent gastrointestinal, cardiovascular, and renal adverse effects. Since its introduction in 1973, a number of different diclofenac-containing drug products have been developed with the goal of improving efficacy, tolerability, and patient convenience. Delayed- and extended-release forms of diclofenac sodium were initially developed with the goal of improving the safety profile of diclofenac and providing convenient, once-daily dosing for the treatment of patients with chronic pain. New drug products consisting of diclofenac potassium salt were associated with faster absorption and rapid onset of pain relief. These include diclofenac potassium immediate-release tablets, diclofenac potassium liquid-filled soft gel capsules, and diclofenac potassium powder for oral solution. The advent of topical formulations of diclofenac enabled local treatment of pain and inflammation while minimizing systemic absorption of diclofenac. SoluMatrix diclofenac, consisting of submicron particles of diclofenac free acid and a proprietary combination of excipients, was developed to provide analgesic efficacy at reduced doses associated with lower systemic absorption. This review illustrates how pharmaceutical technology has been used to modify the pharmacokinetic properties of diclofenac, leading to the creation of novel drug products with improved clinical utility.

Inherent Anticipation in the Pharmaceutical and Biotechnology Industries.

Science.gov (United States)

Goldman, Michael; Evans, Georgia; Zappia, Andrew

2015-04-15

Pharmaceutical and biotech research often involves discovering new properties of, or new methods to use, existing compositions. The doctrine of inherent anticipation, however, prevents the issuance and/or validity of a patent for discoveries deemed to have been implicitly disclosed in the prior art. This can be a barrier to patent rights in these technologies. Inherent anticipation therefore creates uncertainty for patent protection in the pharmaceutical and biotech sciences. Despite this uncertainty, Federal Circuit jurisprudence provides guidance on the boundaries of the inherent anticipation doctrine. In view of the case law, certain strategies may be employed to protect inventions that may potentially be viewed as inherent in the prior art. Copyright © 2015 Cold Spring Harbor Laboratory Press; all rights reserved.

[Application of FT-IR pattern recognition method for the quality control of pharmaceutical ingredients].

Science.gov (United States)

Horgos, József; Kóger, Péter; Zelkó, Romána

2009-01-01

Nowadays infrared spectroscopy and chemometrics have proven their effectiveness for both qualitative and quantitative analyses in different fields like agriculture, food, chemical and oil industry. Furier Transformation Infrared Spectroscopy (FT-IR) combined with Attenuated Total Reflectance (ATR) plate is a fast identification instrument. It is suitable for analysis of solid and liquid phase, too. Associated with chemometrics, it would be a powerful tool for the pharmaceutical wholesalers to detect the insufficient quality of pharmaceutical ingredients. In the present study beside the review of the infra red technology, pharmaceutical ingredients were examined with the help of our spectra library.

Cyclodextrins and their pharmaceutical applications.

Science.gov (United States)

Loftsson, Thorsteinn; Duchêne, Dominique

2007-02-01

Cyclodextrins were first described by Villiers in 1891. Schardinger laid the foundation of the cyclodextrin chemistry in 1903-1911 and identified both alpha- and beta-cyclodextrin. In the 1930s, Freudenberg identified gamma-cyclodextrin and suggested that larger cyclodextrins could exist. Freudenberg and co-workers showed that cyclodextrins were cyclic oligosaccharides formed by glucose units and somewhat later Cramer and co-workers described their ability to form inclusion complexes. By the early 1950s the basic physicochemical characteristics of cyclodextrins had been discovered, including their ability to solubilize and stabilize drugs. The first cyclodextrin-related patent was issued in 1953 to Freudenberg, Cramer and Plieninger. However, pure cyclodextrins that were suitable for pharmaceutical applications did not come available until about 25 years later and at the same time the first cyclodextrin-containing pharmaceutical product was marketed in Japan. Later cyclodextrin-containing products appeared on the European market and in 1997 also in the US. New cyclodextrin-based technologies are constantly being developed and, thus, 100 years after their discovery cyclodextrins are still regarded as novel excipients of unexplored potential.

Evaluation of P-Listed Pharmaceutical Residues in Empty Pharmaceutical Containers

Science.gov (United States)

Under the Resource Conservation and Recovery Act (RCRA), some pharmaceuticals are considered acute hazardous wastes because their sole active pharmaceutical ingredients are P-listed commercial chemical products (40 CFR 261.33). Hospitals and other healthcare facilities have stru...

Quality in the pharmaceutical industry – A literature review

Science.gov (United States)

Haleem, Reham M.; Salem, Maissa Y.; Fatahallah, Faten A.; Abdelfattah, Laila E.

2013-01-01

Objectives The aim of this study is to:a.Highlight the most important guidelines and practices of quality in the pharmaceutical industry.b.Organize such guidelines and practices to create a guide to pave the way for other researchers who would like to dig deeper into these guidelines and practices. Design A review was conducted of 102 publications; 56 publications were concerned with the pharmaceutical quality directly while 46 publications were concerned with the general quality practices. The content of those sources was analyzed and the following themes were identified:a.Research theme 1: Guidelines of the pharmaceutical quality.b.Research theme 2: General practices recently applied in the pharmaceutical industry. Main outcome measures The following guidelines were identified and reviewed: WHO guidelines, FDA guidelines, EU guidelines and ICH guidelines in the research theme I. In research theme II; the following topics were identified and reviewed: quality risk management, quality by design, corrective actions and preventive actions, process capability analysis, Six Sigma, process analytical technology, lean manufacturing, total quality management, ISO series and HACCP. Results Upon reviewing the previously highlighted guidelines and the practices that are widely applied in the pharmaceutical industry, it was noticed that there is an abundant number of papers and articles that explain the general guidelines and practices but the literature lack those describing application; case studies of the pharmaceutical factories applying those guidelines and significance of those guidelines and practices. Conclusions It is recommended that the literature would invest more in the area of application and significance of guidelines and practices. New case studies should be done to prove the feasibility of such practices. PMID:26594110

Studies of beneficial interactions between active medicaments and excipients in pharmaceutical formulations.

Science.gov (United States)

Kalinkova, G N

1999-09-30

A review of "up to date" research findings leading to new concepts of the pharmaceutical formulations and their interactions has been presented. The rational approaches to the excipients choice as well as to their interactions with medicaments have been shown as a basis for modern modelling of pharmaceutical formulations. The importance of complexation, hydrogen bonding, ion-dipole, dipole-dipole and van der Waals attractions as the tools which can modify the physicochemical, pharmacological or pharmacokinetical behaviour of the medicaments has been emphasised. In vivo studies (carried out in healthy human subjects-volunteers, in beagle dogs, in rats etc.) and in vitro studies (on excised human skin, hairless mouse skin etc.) as well as studies of chemical stability and bioavailability serve also as a proof of these interactions. Therefore, excipients are important components of pharmaceutical formulations and they can take an active part in the improvement of the characteristics of formulations (but they may also reduce the effectiveness of some preparations). In this context, the so called active and inactive ingredients in pharmaceutical formulations are inexact, old and "out-of date". Their further use is only conventional. In conclusion, among the various modern techniques applied the combination of infrared spectroscopy and X-ray diffraction has been estimated as the most successful in proving the interactions between drugs and excipients. Finally, pharmaceutical formulations and their interactions have constituted a diverse and rapidly expanding field of Pharmacy (Pharmaceutical Technology, Pharmaceutical Industry and Pharmaceutical Sciences) which covers a wide range of numerical topics within an unified framework.

Transformation in the pharmaceutical industry--a systematic review of the literature.

Science.gov (United States)

Shafiei, Nader; Ford, James L; Morecroft, Charles W; Lisboa, Paulo J; Taylor, Mark J; Mouzughi, Yusra

2013-01-01

The evolutionary development of pharmaceutical transformation was studied through systematic review of the literature. Fourteen triggers were identified that will affect the pharmaceutical business, regulatory science, and enabling technologies in future years. The relative importance ranking of the transformation triggers was computed based on their prevalence within the articles studied. The four main triggers with the strongest literature evidence were Fully Integrated Pharma Network, Personalized Medicine, Translational Research, and Pervasive Computing. The theoretical quality risks for each of the four main transformation triggers are examined, and the remaining ten triggers are described. The pharmaceutical industry is currently going through changes that affect the way it performs its research, manufacturing, and regulatory activities (this is termed pharmaceutical transformation). The impact of these changes on the approaches to quality risk management requires more understanding. In this paper, a comprehensive review of the academic, regulatory, and industry literature were used to identify 14 triggers that influence pharmaceutical transformation. The four main triggers, namely Fully Integrated Pharma Network, Personalized Medicine, Translational Research, and Pervasive Computing, were selected as the most important based on the strength of the evidence found during the literature review activity described in this paper. Theoretical quality risks for each of the four main transformation triggers are examined, and the remaining ten triggers are described.

Increasing the reliability of production schedules in a pharmaceutical packaging department.

Science.gov (United States)

Pacciarelli, Dario; D'Ariano, Andrea

2012-12-01

This paper studies quantitative methods for evaluating the potential benefits of introducing new advanced tracking technologies in the pharmaceutical industry with special reference to radio frequency identification (RFID). RFID technology is an effective way for increasing the quality of the data that are used to generate production schedules, but there is a lack of scientific research to quantify the return on investment that can be achieved in practice. In this work, we distinguish two major sources of data unreliability: one is the inherent stochasticity of operations, which cannot be reduced by RFID, and the other one is the data estimation error, which can be significantly reduced by RFID. We focus on the marginal contribution of the latter quantity to the productivity of the packaging department of a pharmaceutical plant, propose a systematic method for assessing this impact and discuss its implementation in a practical test case. Our results confirm that advanced tracking technologies in combination with effective scheduling procedures show a significant potential for improving productivity. Extensions to other production environments and their issues associated with scheduling problems are also discussed.

Editorial Nano structures for Medicine and Pharmaceuticals

International Nuclear Information System (INIS)

Xing-Jie, L.; Kumar, A.; Donglu, S.; Daxiang, C.

2012-01-01

The rapid developments in nano structured materials and nano technology will have profound impact in many areas of biomedical applications including delivery of drugs and biomolecules, tissue engineering, detection of bio markers, cancer diagnosis, cancer therapy, and imaging. This field is expanding quickly, and a lot of work is ongoing in the design, characterization, synthesis, and application of materials, for controlling shape and size at nanometer scale to develop highly advanced materials for biomedical application and even to design better pharmaceutical products. In recent years, novel nano structure with multi functionalities has been focused on the use of nano structures toward solving problems of biology and medicine. The main scope of this special issue is to demonstrate the latest achievement of nano technology and its application in nano medicine particularly in new approaches for drug delivery such as targeted drug delivery system, nano structure for drug storage, nano materials for tissue engineering, medical diagnosis and treatment, and generation of new kinds of materials from biological sources. Therefore, many critical issues in nano structured materials, particularly their applications in biomedicine, must be addressed before clinical applications. This special issue devotes several review and research articles encompassing various aspects of nano materials for medicine and pharmaceuticals.

The argument for pharmaceutical policy.

Science.gov (United States)

Traulsen, Janine Morgall; Almarsdóttir, Anna Birna

2005-02-01

Pharmaceutical policy is a global concern. It has become a hot political topic in most countries--developed as well as developing--and can be found on the agenda of international organizations such as WHO, OECD, EU, WTO and even the World Bank. Pharmaceutical policy affects everyone in the world of pharmacy and it is therefore imperative that it be understood, discussed and debated within the pharmacy profession and included in the curriculum of schools of pharmacy. This, the first article in a series, argues for the importance of the academic discipline of pharmaceutical policy analysis and the involvement of pharmacists in this endeavour. The aim of the authors is to stimulate an informed and critical appreciation of this field. The authors begin with an introduction to the field of pharmaceutical policy, introducing several important concepts and current trends including: medicines regulation; how pharmaceutical policy is made; pharmaceutical policy as a dynamic process; and the new public health as a global issue. The article ends with a short description of the remaining five articles in the series which will deal with important aspects of pharmaceutical policy. The topics include: economic pressures on health care systems; drug utilization from the clinical viewpoint (rational use of medicines); the impact of pharmaceutical policy on patients and the patient impact on pharmaceutical policy; the professional perspective; and finally the last article which deals with studying and evaluating pharmaceutical policy.

Pharmaceutical counseling: Between evidence-based medicine and profits.

Science.gov (United States)

Egorova, S N; Akhmetova, T

2015-01-01

pharmaceutical counseling standards: Article 1.1 "Code of Ethics of the pharmaceutical worker of Russia" states: "The main task of the professional activity of the pharmaceutical worker - protection of human health", Article 1.3 states that a pharmaceutical worker must take professional decisions solely in the interests of a patient [1]. However, the pharmacy is a trade organization, thus as a retailer the pharmacy is directly interested in making profits and increasing sales of pharmaceutical products, including non-prescription medicines. Moreover, while the clinical medicine is monitored for unjustified prescribing and measures are being taken to prevent polypharmacy, for a pharmacist the growing sales of over-the-counter drugs, active promotion of dietary supplements, homeopathic medicines, medical devices, and, consequently, an increase of financial indicators (particularly "average purchase size") - all are characteristics of success [2].Rational use of over-the-counter medicines requires introduction of pharmaceutical counseling standards (pharmaceutical care) according to symptoms - major reasons to visit a pharmacy as part of responsible self-medication (cold, sore throat, headache, diarrhea, etc.). Standards of pharmaceutical counseling should be objective, reliable and up-to-date and contain recommendations for the rational use of over-the-counter drugs as well as indications requiring treatment to the doctor. Standardization of pharmaceutical counseling in terms of Evidence-based Pharmacy would enhance the efficiency, safety and cost-effectiveness of over-the-counter medicines.Currently, the lack of clinical component in the higher pharmaceutical education and the lack of approved standards of pharmaceutical counseling lead to the introduction of cross-selling technologies (which are broadly applied in other areas of trade, for example, the offer of a boot-polish during the sale of shoes) to the pharmaceutical practice [2, 3]. However, drugs belong to a special group

Dropwise additive manufacturing of pharmaceutical products for solvent-based dosage forms.

Science.gov (United States)

Hirshfield, Laura; Giridhar, Arun; Taylor, Lynne S; Harris, Michael T; Reklaitis, Gintaras V

2014-02-01

In recent years, the US Food and Drug Administration has encouraged pharmaceutical companies to develop more innovative and efficient manufacturing methods with improved online monitoring and control. Mini-manufacturing of medicine is one such method enabling the creation of individualized product forms for each patient. This work presents dropwise additive manufacturing of pharmaceutical products (DAMPP), an automated, controlled mini-manufacturing method that deposits active pharmaceutical ingredients (APIs) directly onto edible substrates using drop-on-demand (DoD) inkjet printing technology. The use of DoD technology allows for precise control over the material properties, drug solid state form, drop size, and drop dynamics and can be beneficial in the creation of high-potency drug forms, combination drugs with multiple APIs or individualized medicine products tailored to a specific patient. In this work, DAMPP was used to create dosage forms from solvent-based formulations consisting of API, polymer, and solvent carrier. The forms were then analyzed to determine the reproducibility of creating an on-target dosage form, the morphology of the API of the final form and the dissolution behavior of the drug over time. DAMPP is found to be a viable alternative to traditional mass-manufacturing methods for solvent-based oral dosage forms. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

Pharmaceutical removal during managed aquifer recharge with pretreatment by advanced oxidation

KAUST Repository

Lekkerkerker-Teunissen, Karin

2012-10-01

Organic micropollutants (OMPs) are detected in sources for drinking water and treatment possibilities are investigated. Innovative removal technologies are available such as membrane filtration and advanced oxidation, but also biological treatment should be considered. By combining an advanced oxidation process with managed aquifer recharge (MAR), two complementary processes are expected to provide a hybrid system for OMP removal, according to the multiple barrier approach. Laboratory scale batch reactor experiments were conducted to investigate the removal of dissolved organic carbon (DOC) and 14 different pharmaceutically active compounds (PhACs) from MAR influent water and water subjected to oxidation, under different process conditions. A DOC removal of 10% was found in water under oxic (aerobic) conditions for batch reactor experiments, a similar value for DOC removal was observed in the field. Batch reactor experiments for the removal of PhACs showed that the removal of pharmaceuticals ranged from negligible to more than 90%. Under oxic conditions, seven out of 14 pharmaceuticals were removed over 90% and 12 out of 14 pharmaceuticals were removed at more than 50% during 30 days of experiments. Under anoxic conditions, four out of 14 pharmaceuticals were removed over 90% and eight out of 14 pharmaceuticals were removed at more than 50% over 30 days\\' experiments. Carbamazepine and phenazone were persistent both under oxic and anoxic conditions. The PhACs removal efficiency with oxidized water was, for most compounds, comparable to the removal with MAR influent water. Copyright © IWA Publishing 2012.

Pharmaceutical removal during managed aquifer recharge with pretreatment by advanced oxidation

KAUST Repository

Lekkerkerker-Teunissen, Karin; Chekol, E. T.; Maeng, Sungkyu; Ghebremichael, Kebreab A.; Houtman, Corine J.; Verliefde, Arne R. D.; Verberk, J. Q J C; Amy, Gary L.; Van Dijk, Johannis C.

2012-01-01

Organic micropollutants (OMPs) are detected in sources for drinking water and treatment possibilities are investigated. Innovative removal technologies are available such as membrane filtration and advanced oxidation, but also biological treatment should be considered. By combining an advanced oxidation process with managed aquifer recharge (MAR), two complementary processes are expected to provide a hybrid system for OMP removal, according to the multiple barrier approach. Laboratory scale batch reactor experiments were conducted to investigate the removal of dissolved organic carbon (DOC) and 14 different pharmaceutically active compounds (PhACs) from MAR influent water and water subjected to oxidation, under different process conditions. A DOC removal of 10% was found in water under oxic (aerobic) conditions for batch reactor experiments, a similar value for DOC removal was observed in the field. Batch reactor experiments for the removal of PhACs showed that the removal of pharmaceuticals ranged from negligible to more than 90%. Under oxic conditions, seven out of 14 pharmaceuticals were removed over 90% and 12 out of 14 pharmaceuticals were removed at more than 50% during 30 days of experiments. Under anoxic conditions, four out of 14 pharmaceuticals were removed over 90% and eight out of 14 pharmaceuticals were removed at more than 50% over 30 days' experiments. Carbamazepine and phenazone were persistent both under oxic and anoxic conditions. The PhACs removal efficiency with oxidized water was, for most compounds, comparable to the removal with MAR influent water. Copyright © IWA Publishing 2012.

Pharmaceuticals as emerging contaminants and their removal from water. A review.

Science.gov (United States)

Rivera-Utrilla, José; Sánchez-Polo, Manuel; Ferro-García, María Ángeles; Prados-Joya, Gonzalo; Ocampo-Pérez, Raúl

2013-10-01

The main objective of this study was to conduct an exhaustive review of the literature on the presence of pharmaceutical-derived compounds in water and on their removal. The most representative pharmaceutical families found in water were described and related water pollution issues were analyzed. The performances of different water treatment systems in the removal of pharmaceuticals were also summarized. The water treatment technologies were those based on conventional systems (chlorine, chlorine dioxide, wastewater treatment plants), adsorption/bioadsorption on activated carbon (from lotus stalks, olive-waste cake, coal, wood, plastic waste, cork powder waste, peach stones, coconut shell, rice husk), and advanced oxidation processes by means of ozonation (O₃, O₃/H₂O₂, O₃/activated carbon, O₃/biological treatment), photooxidation (UV, UV/H₂O₂, UV/K₂S₂O₈, UV/TiO₂, UV/H₂O₂/TiO₂, UV/TiO₂/activated carbon, photo-Fenton), radiolysis (e-Beam, ⁶⁰Co, ¹³⁷Cs. Additives used: H₂O₂, SO₃²⁻, HCO₃⁻, CH₃₋OH, CO₃²⁻, or NO₃⁻), and electrochemical processes (Electrooxidation without and with active chlorine generation). The effect of these treatments on pharmaceutical compounds and the advantages and disadvantages of different methodologies used were described. The most important parameters of the above water treatment systems (experimental conditions, removal yield, pharmaceutical compound mineralization, TOC removal, toxicity evolution) were indicated. The key publications on pharmaceutical removal from water were summarized. Copyright © 2013 Elsevier Ltd. All rights reserved.

Public funding of pharmaceuticals in The Netherlands: investigating the effect of evidence, process and context on CVZ decision-making.

Science.gov (United States)

Cerri, Karin H; Knapp, Martin; Fernandez, Jose-Luis

2014-09-01

The College Voor Zorgverzekeringen (CVZ) provides guidance to the Dutch healthcare system on funding and use of new pharmaceutical technologies. This study examined the impact of evidence, process and context factors on CVZ decisions in 2004-2009. A data set of CVZ decisions pertaining to pharmaceutical technologies was created, including 29 variables extracted from published information. A three-category outcome variable was used, defined as the decision to 'recommend', 'restrict' or 'not recommend' a technology. Technologies included in list 1A/1B or on the expensive drug list were considered recommended; those included in list 2 or for which patient co-payment is required were considered restricted; technologies not included on any reimbursement list were classified as 'not recommended'. Using multinomial logistic regression, the relative contribution of explanatory variables on CVZ decisions was assessed. In all, 244 technology appraisals (256 technologies) were analysed, with 51%, of technologies recommended, 33% restricted and 16% not recommended by CVZ for funding. The multinomial model showed significant associations (p ≤ 0.10) between CVZ outcome and several variables, including: (1) use of an active comparator and demonstration of statistical superiority of the primary endpoint in clinical trials, (2) pharmaceutical budget impact associated with introduction of the technology, (3) therapeutic indication and (4) prevalence of the target population. Results confirm the value of a comprehensive and multivariate approach to understanding CVZ decision-making.

Characterization of the evolution of the pharmaceutical regulatory environment.

Science.gov (United States)

Shafiei, Nader; Ford, James L; Morecroft, Charles W; Lisboa, Paulo J; Taylor, Mark J

2013-01-01

This paper is part of a research study that is intended to identify pharmaceutical quality risks induced by the ongoing transformation in the industry. This study establishes the current regulatory context by characterizing the development of the pharmaceutical regulatory environment. The regulatory environment is one of the most important external factors that affects a company's organization, processes, and technological strategy. This is especially the case with the pharmaceutical industry, where its products affect the quality of life of the consumers. The quantitative analysis of regulatory events since 1813 and review of the associated literature resulted in identification of six factors influencing the regulatory environment, namely public health protection, public health promotion, crisis management, harmonization, innovation, and modernization. From 1813 to the 1970s the focus of regulators was centered on crisis management and public health protection-a basic mission that has remained consistent over the years. Since the 1980s a gradual move in the regulatory environment towards a greater focus on public health promotion, international harmonization, innovation, and agency modernization may be seen. The pharmaceutical industry is currently going through changes that affect the way it performs its research, manufacturing, and regulatory activities. The impact of these changes on the approaches to quality risk management requires more understanding. The authors are engaged in research to identify elements of the changes that influence pharmaceutical quality. As quality requirements are an integral part of the pharmaceutical regulations, a comprehensive understanding of these regulations is seen as the first step. The results of this study show that (i) public health protection, public health promotion, crisis management, harmonization, innovation, and modernization are factors that affect regulations in the pharmaceutical industry; (ii) the regulators' main

Thiomers: A Blessing to Evaluating Era of Pharmaceuticals

Directory of Open Access Journals (Sweden)

Muhammad Hanif

2015-01-01

Full Text Available Thiomers are the polymers modified for the mucoadhesive properties and other additive properties by incorporating thiol moieties in the backbone of the unmodified polymeric chain by substitution reactions or simple oxidation reactions. Drugs that are less soluble and permeable can be complexed with thiomers for their increased absorption through the mucosal membranes by increase in contact time and prolonged stay in body due to mucoadhesion. Immobilization of thiol group therefore increases the mucoadhesive properties of the modified polymer by 2–140-folds. The prepared thiomers are characterized and made stable by different techniques. Thiomers also give the controlled delivery of the active pharmaceutical ingredients in the body. Different polymers that are modified by thiolation are chitosan, polyacrylic acid, sodium alginate, sodium carboxy methyl cellulose, guar gum, and so forth. Thiomeric formulations are a challenge to deliver drugs with low therapeutic compatibility. Micro- and nanopreparations containing thiomers can be prepared by different techniques such as covalent crosslinking, in situ gelation, radical emulsion polymerization, and emulsification. Nowadays thiomers have wide range of applications as a promising pharmaceutical excipient in the evaluating era of pharmaceutical technology.

[Innovation in pharmaceutical and health biotechnology industries: challenges for a virtuous agenda].

Science.gov (United States)

Vargas, Marco; Gadelha, Carlos Augusto Grabois; Costa, Laís Silveira; Maldonado, José

2012-12-01

Pharmaceutical and biotechnology industries comprise a major production subsystem of the health industrial complex in Brazil. It stands out for both its economic importance and its prominent role in developing new technologies in strategic areas. Strengthening the local production of generic drugs in the last decade has significantly increased the number of Brazilian companies in the local pharmaceutical market and has been an important turning point for this industry's growth. However, there remain major structural bottlenecks both in terms of production and continuous innovation. These bottlenecks reveal the high vulnerability of the Brazilian National Health System and point to the need of public policies that promote strengthening the production base and innovation in the pharmaceutical industry and that at the same time meet health-related social demands in health in Brazil.

[Logistics in the pharmaceutical service].

Science.gov (United States)

Stanko, P; Fulmeková, M

2005-11-01

The conception of the field of pharmaceutical service defines pharmaceutical service as the basic part of pharmacy, the principal task of which is to provide pharmaceutical care as an inseparable part of providing health care. It represents a set of professional activities of the pharmacist oriented to securing human and veterinary pharmaceutical products and health care products and to optimising effective, safe and quality pharmacotherapy. Technically, pharmaceutical service is an applied discipline, as it makes use of knowledge gained in other pharmaceutical, medical, psychological, social, and economic sciences. Because of its interdisciplinary character it is necessary to extend the theory of pharmaceutical service in such a way so that it may reflect all aspects of its sphere of activity. One of the possibilities is to define the pharmacy premises as an independent functional unit which operates on the basis of valid legal standards in such a way that on the one hand it secures the provision of health (pharmaceutical) care, and on the other hand it maintains its cost-effectiveness. To keep the quality of care of the patient and the economic aspect in balance, it is necessary to define the term pharmaceutical logistics also under the conditions of Slovak (Czech) pharmacy as early satisfaction of the requirements of the patient (client) in the pharmacy premises, which means that the appropriate pharmaceutical product or health care product and the appropriate information must be at the right time in the required amount and required quality in the right place.

Radiation sterilization of pharmaceuticals (eg chloramphenicol)

International Nuclear Information System (INIS)

Zeegers, F.; Tilquin, B.

1991-01-01

In connection with the ongoing world-wide application of irradiation as a new technology for sterilization, the identification of the drugs products is very important. Introduction of radiosterilization of pharmaceuticals is proceeding at a slower rate than that for disposable medical supplies; it is the responsibility of the manufacturer to prove that degradation of products is safe. Major advantages in the use of radiation as a sterilization procedure are high penetrating power, small temperature rise, ease of control and minimal degradation of irradiated solid drugs [fr

Pharmaceutical advertising in emergency departments.

Science.gov (United States)

Marco, Catherine A

2004-04-01

Promotion of prescription drugs represents a growing source of pharmaceutical marketing expenditures. This study was undertaken to identify the frequency of items containing pharmaceutical advertising in clinical emergency departments (EDs). In this observational study, emergency physician on-site investigators quantified a variety of items containing pharmaceutical advertising present at specified representative times and days, in clinical EDs. Measurements were obtained by 65 on-site investigators, representing 22 states. Most EDs in this study were community EDs (87% community and 14% university or university affiliate), and most were in urban settings (50% urban, 38% suburban, and 13% rural). Investigators measured 42 items per ED (mean = 42; median = 31; interquartile range of 14-55) containing pharmaceutical advertising in the clinical area. The most commonly observed items included pens (mean 15 per ED; median 10), product brochures (mean 5; median 3), stethoscope labels (mean 4; median 2), drug samples (mean 3; median 0), books (mean 3.4), mugs (mean 2.4), and published literature (mean 3.1). EDs with a policy restricting pharmaceutical representatives in the ED had significantly fewer items containing pharmaceutical advertising (median 7.5; 95% CI = 0 to 27) than EDs without such a policy (median 35; 95% CI = 27 to 47, p = 0.005, nonparametric Wilcoxon two-sample test). There were no differences in quantities of pharmaceutical advertising for EDs in community compared with university settings (p = 0.5), rural compared with urban settings (p = 0.3), or annual ED volumes (p = 0.9). Numerous items containing pharmaceutical advertising are frequently observed in EDs. Policies restricting pharmaceutical representatives in the ED are associated with reduced pharmaceutical advertising.

Development and validation of NIR-chemometric methods for chemical and pharmaceutical characterization of meloxicam tablets.

Science.gov (United States)

Tomuta, Ioan; Iovanov, Rares; Bodoki, Ede; Vonica, Loredana

2014-04-01

Near-Infrared (NIR) spectroscopy is an important component of a Process Analytical Technology (PAT) toolbox and is a key technology for enabling the rapid analysis of pharmaceutical tablets. The aim of this research work was to develop and validate NIR-chemometric methods not only for the determination of active pharmaceutical ingredients content but also pharmaceutical properties (crushing strength, disintegration time) of meloxicam tablets. The development of the method for active content assay was performed on samples corresponding to 80%, 90%, 100%, 110% and 120% of meloxicam content and the development of the methods for pharmaceutical characterization was performed on samples prepared at seven different compression forces (ranging from 7 to 45 kN) using NIR transmission spectra of intact tablets and PLS as a regression method. The results show that the developed methods have good trueness, precision and accuracy and are appropriate for direct active content assay in tablets (ranging from 12 to 18 mg/tablet) and also for predicting crushing strength and disintegration time of intact meloxicam tablets. The comparative data show that the proposed methods are in good agreement with the reference methods currently used for the characterization of meloxicam tablets (HPLC-UV methods for the assay and European Pharmacopeia methods for determining the crushing strength and disintegration time). The results show the possibility to predict both chemical properties (active content) and physical/pharmaceutical properties (crushing strength and disintegration time) directly, without any sample preparation, from the same NIR transmission spectrum of meloxicam tablets.

Tropical Journal of Pharmaceutical Research

African Journals Online (AJOL)

Journal Homepage Image. We seek to encourage pharmaceutical and allied research of tropical and international relevance and to foster multidisciplinary research and collaboration among scientists, the pharmaceutical industry and the healthcare professionals. We publish articles in pharmaceutical sciences and related ...

An Evidence Framework for Off-Patent Pharmaceutical Review (EFOR) for Health Technology Assessment in Emerging Markets.

Science.gov (United States)

Brixner, Diana; Kaló, Zoltán; Maniadakis, Nikos; Kim, Kyoo; Wijaya, Kalman

2018-03-29

This article introduces an Evidence Framework for Off-Patent Pharmaceutical Review (EFOR), which establishes value-based criteria in a template that manufacturers use to provide evidence showing how their products meet those criteria. Health authorities in emerging markets can then use the evidence presented in the EFOR to evaluate off-patent pharmaceuticals (OPPs) in a consistent, transparent, and evidence-based manner to support policy decisions, including pricing, reimbursement, formulary listing, and drug procurement. A literature search found no multi-criteria evidence framework for evaluating OPPs in emerging markets. An International Outcomes Research Board (IORB) of academia and industry experts conducted extensive research, meetings, and workshops to define high-priority criteria to incorporate into an evidence-based health technology assessment (HTA) tool using the multi-criteria decision analysis (MCDA) technique. The resulting framework was further tailored for country-specific needs in workshops in three emerging countries (Kazakhstan, Vietnam, and Indonesia). The IORB defined nine criteria four categories (Product, Manufacturing, Service, and Value Assessment), which OPP manufacturers can use to provide evidence for reimbursement and health policy decision making. Then the IORB developed the EFOR as a base case document, which can be adapted and used as a template by health authorities in emerging countries. Emerging countries have a significant need for an HTA tool that balances affordability with accurate evidence showing the value differentiation of OPPs. The value attributes in this setting often are different from those in developed markets, which emphasize new products and have high regulation and manufacturing standards. The EFOR is an easy-to-use, adaptable framework that emerging countries can use to increase the consistency, transparency, and effectiveness of drug decision making. The open source EFOR is available as Supplemental Materials

Data Sharing in the Pharmaceutical Enterprise: The Genie's Out of the Bottle.

Science.gov (United States)

Beninger, Paul; Connelly, James; Natarajan, Chandrasekhar

2017-09-01

This Commentary shows that the present emphasis on the sharing of data from clinical trials can be extended to the entire pharmaceutical enterprise. The authors constructed a Data Sharing Dashboard that shows the relationship between all of the life-cycle domains of the pharmaceutical enterprise from discovery to obsolescence and the domain-bridging disciplines, such as target credentialing, structure-activity relationships, and exposure-effect relationships. The published literature encompassing the pharmaceutical enterprise is expansive, covering the major domains of discovery, translation, clinical development, and post-marketing outcomes research, all of which have even larger, though generally inaccessible, troves of legacy data bases. Notable exceptions include the fields of genomics and bioinformatics. We have the opportunity to broaden the present momentum of interest in data sharing to the entire pharmaceutical enterprise, beginning with discovery and extending into health technology assessment and post-patent expiry generic use with the plan of integrating new levels and disciplines of knowledge and with the ultimate goal of improving the care of our patients. Copyright © 2017 Elsevier HS Journals, Inc. All rights reserved.

Pharmaceutical Formulation Facilities as Sources of Opioids and Other Pharmaceuticals to Wastewater Treatment Plant Effluents

Science.gov (United States)

2010-01-01

Facilities involved in the manufacture of pharmaceutical products are an under-investigated source of pharmaceuticals to the environment. Between 2004 and 2009, 35 to 38 effluent samples were collected from each of three wastewater treatment plants (WWTPs) in New York and analyzed for seven pharmaceuticals including opioids and muscle relaxants. Two WWTPs (NY2 and NY3) receive substantial flows (>20% of plant flow) from pharmaceutical formulation facilities (PFF) and one (NY1) receives no PFF flow. Samples of effluents from 23 WWTPs across the United States were analyzed once for these pharmaceuticals as part of a national survey. Maximum pharmaceutical effluent concentrations for the national survey and NY1 effluent samples were generally effluent had median concentrations ranging from 3.4 to >400 μg/L. Maximum concentrations of oxycodone (1700 μg/L) and metaxalone (3800 μg/L) in samples from NY3 effluent exceeded 1000 μg/L. Three pharmaceuticals (butalbital, carisoprodol, and oxycodone) in samples of NY2 effluent had median concentrations ranging from 2 to 11 μg/L. These findings suggest that current manufacturing practices at these PFFs can result in pharmaceuticals concentrations from 10 to 1000 times higher than those typically found in WWTP effluents. PMID:20521847

ROLE OF INFORMATION PHARMACEUTICAL MARKET IN PROVIDING TRAFFIC CONTROL DRUG

Directory of Open Access Journals (Sweden)

O. S. Solovjov

2014-01-01

Full Text Available The controversial questions of the pharmaceutical market informatization are considered. The main principles and legal frameworks to manage population ensure with medicines based on use of information technology are proposed. The logic and conception framework of related information automatization for hospitals and population under the current legislation are discussed.

The determinants of the adoption of pharmaceutical innovation: evidence from Taiwan.

Science.gov (United States)

Liu, Ya-Ming; Yang, Yea-Huei Kao; Hsieh, Chee-Ruey

2011-03-01

In recent years, a substantial amount of technological progress in medicine has taken the form of pharmaceutical innovation. This paper uses the launch of a series of new drugs designed for treating type 2 diabetic patients as an example to investigate the determinants that affect the diffusion of new medical technology. Based on prescription-level data that are obtained from the national health insurance program in Taiwan, we find that the probability of prescribing new drugs declines as more competing products enter the pharmaceutical market. Meanwhile, physicians are less likely to prescribe new drugs to treat their patients as the provider market becomes less concentrated. These results suggest that the providers' incentives for cost reduction dominate incentives for quality improvement as markets become more competitive and hence an increase in market competition is associated with a decrease in the diffusion of new drugs. As a result, access to new drugs is not uniform among patients in a country with universal coverage for prescription drugs. An important implication of our study is that profit-seeking behavior among providers can become an access barrier to new medical technology. Copyright © 2011 Elsevier Ltd. All rights reserved.

Pharmaceutical compounds in drinking water

Directory of Open Access Journals (Sweden)

Vikas Chander

2016-06-01

Full Text Available Pharmaceutical products and their wastes play a major role in the degradation of environment. These drugs have positive as well as negative consequences on different environmental components including biota in different ways. Many types of pharmaceutical substances have been detected with significant concentrations through various advanced instrumental techniques in surface water, subsurface water, ground water, domestic waste water, municipal waste water and industrial effluents. The central as well as state governments in India are providing supports by creating excise duty free zones to promote the pharmaceutical manufacturers for their production. As a result, pharmaceutical companies are producing different types of pharmaceutical products at large scale and also producing complex non-biodegradable toxic wastes byproducts and releasing untreated or partially treated wastes in the environment in absence of strong regulations. These waste pollutants are contaminating all types of drinking water sources. The present paper focuses on water quality pollution by pharmaceutical pollutants, their occurrences, nature, metabolites and their fate in the environment.

Moving from batch towards continuous organic‐chemical pharmaceutical production

DEFF Research Database (Denmark)

Cervera Padrell, Albert Emili

process understanding. Developing a process within a more flexible design space based on sound engineering judgment potentially allows process optimization once the product has already been approved. Micro‐ and mini‐chemical systems have been envisaged as the optimal scale for pharmaceutical production...... are the highest benefits found? How can a continuous process be designed and implemented? Are continuous processes compatible with slow reactions? Do they allow problem free processing of solid particles? What is the cost needed to implement a continuous process? This PhD thesis tries to answer some of those...... questions through the development of a systematic framework that takes advantage of continuous processing technologies and process systems engineering for the efficient design of continuous pharmaceutical processes. The framework consists of a step‐by‐step procedure that guides the user from drug discovery...

Globalization in the pharmaceutical industry, Part II.

Science.gov (United States)

Casadio Tarabusi, C; Vickery, G

1998-01-01

This is the second of a two-part report on the pharmaceutical industry. Part II begins with a discussion of foreign direct investment and inter-firm networks, which covers international mergers, acquisitions, and minority participation; market shares of foreign-controlled firms; international collaboration agreements (with a special note on agreements in biotechnology); and licensing agreements. The final section of the report covers governmental policies on health and safety regulation, price regulation, industry and technology, trade, foreign investment, protection of intellectual property, and competition.

Supramolecular Pharmaceutical Sciences: A Novel Concept Combining Pharmaceutical Sciences and Supramolecular Chemistry with a Focus on Cyclodextrin-Based Supermolecules.

Science.gov (United States)

Higashi, Taishi; Iohara, Daisuke; Motoyama, Keiichi; Arima, Hidetoshi

2018-01-01

Supramolecular chemistry is an extremely useful and important domain for understanding pharmaceutical sciences because various physiological reactions and drug activities are based on supramolecular chemistry. However, it is not a major domain in the pharmaceutical field. In this review, we propose a new concept in pharmaceutical sciences termed "supramolecular pharmaceutical sciences," which combines pharmaceutical sciences and supramolecular chemistry. This concept could be useful for developing new ideas, methods, hypotheses, strategies, materials, and mechanisms in pharmaceutical sciences. Herein, we focus on cyclodextrin (CyD)-based supermolecules, because CyDs have been used not only as pharmaceutical excipients or active pharmaceutical ingredients but also as components of supermolecules.

Drug delivery system innovation and Health Technology Assessment: Upgrading from Clinical to Technological Assessment.

Science.gov (United States)

Panzitta, Michele; Bruno, Giorgio; Giovagnoli, Stefano; Mendicino, Francesca R; Ricci, Maurizio

2015-11-30

Health Technology Assessment (HTA) is a multidisciplinary health political instrument that evaluates the consequences, mainly clinical and economical, of a health care technology; the HTA aim is to produce and spread information on scientific and technological innovation for health political decision making process. Drug delivery systems (DDS), such as nanocarriers, are technologically complex but they have pivotal relevance in therapeutic innovation. The HTA process, as commonly applied to conventional drug evaluation, should upgrade to a full pharmaceutical assessment, considering the DDS complexity. This is useful to study more in depth the clinical outcome and to broaden its critical assessment toward pharmaceutical issues affecting the patient and not measured by the current clinical evidence approach. We draw out the expertise necessary to perform the pharmaceutical assessment and we propose a format to evaluate the DDS technological topics such as formulation and mechanism of action, physicochemical characteristics, manufacturing process. We integrated the above-mentioned three points in the Evidence Based Medicine approach, which is data source for any HTA process. In this regard, the introduction of a Pharmaceutics Expert figure in the HTA could be fundamental to grant a more detailed evaluation of medicine product characteristics and performances and to help optimizing DDS features to overcome R&D drawbacks. Some aspects of product development, such as manufacturing processes, should be part of the HTA as innovative manufacturing processes allow new products to reach more effectively patient bedside. HTA so upgraded may encourage resource allocating payers to invest in innovative technologies and providers to focus on innovative material properties and manufacturing processes, thus contributing to bring more medicines in therapy in a sustainable manner. Copyright © 2015 Elsevier B.V. All rights reserved.

[Hospital pharmaceutical practice in prison].

Science.gov (United States)

Harcouët, L

2010-09-01

Since 1994, hospital pharmaceutical teams have been in charge of pharmaceutical tasks in "unités de consultation et de soins ambulatoires" (UCSA), which are hospital consulting care units in French prisons. In 2008, pharmaceutical team in Parisian prisons received 6500 prescriptions and prepared 85,000 nominative bags containing drugs. Prisoners were 1.3% to receive treatments against HIV, 8.2% cardiovascular drugs, 7.2% opioid substitution treatments, and 52.9% psychoactive drugs, including 39.3% hypnotics, 40.5% anxiolytics, 11.3% antidepressants and 12.2% neuroleptics. In prison, the dichotomy between somatic and mental care is marked, attitudes of prisoners about their medicines are complex (important claims, embezzlement, etc.) and it is difficult for law defendants to maintain treatment confidentiality and to prepare prison outing in terms of health. To attenuate the heterogeneity of drug distribution systems in French prisons, we propose pharmaceutical analysis of prescriptions and nominative dispensation, computerization in UCSA in coordination with hospitals, a better contribution of prison medical and pharmaceutical staff in hospital "drug committees" and the redaction of pharmaceutical guidelines. Acting in concert with multidisciplinary medical staff in UCSA, pharmaceutical teams have to develop epidemiological studies to improve knowledge in prisoner's health and also prevention and health care in prison. Copyright © 2010 Elsevier Masson SAS. All rights reserved.

Implementing an online pharmaceutical service using design science research.

Science.gov (United States)

Lapão, Luís Velez; da Silva, Miguel Mira; Gregório, João

2017-03-27

The rising prevalence of chronic diseases is pressing health systems to introduce reforms. Primary healthcare and multidisciplinary models have been suggested as approaches to deal with this challenge, with new roles for nurses and pharmacists being advocated. More recently, implementing healthcare based on information systems and technologies (e.g. eHealth) has been proposed as a way to improve health services. However, implementing online pharmaceutical services, including their adoption by pharmacists and patients, is still an open research question. In this paper we present ePharmacare, a new online pharmaceutical service implemented using Design Science Research. The Design Science Research Methodology (DSRM) was chosen to implement this online service for chronic diseases management. In the paper, DSRM's different activities are explained, from the definition of the problem to the evaluation of the artifact. During the design and development activities, surveys, observations, focus groups, and eye-tracking glasses were used to validate pharmacists' and patients' requirements. During the demonstration and evaluation activities the new service was used with real-world pharmacists and patients. The results show the contribution of DSRM in the implementation of online services for pharmacies. We found that pharmacists spend only 50% of their time interacting with patients, uncovering a clear opportunity to implement online pharmaceutical care services. On the other hand, patients that regularly visit the same pharmacy recognize the value in patient follow-up demanding to use channels such as the Internet for their pharmacy interactions. Limitations were identified regarding the high workload of pharmacists, but particularly their lack of know-how and experience in dealing with information systems (IST) for the provision of pharmaceutical services. This paper summarizes a research project in which an online pharmaceutical service was proposed, designed, developed

A need for the standardization of the pharmaceutical sector in Libya

African Journals Online (AJOL)

2010-10-21

Oct 21, 2010 ... Medicines are health technologies that can translate into tangible benefits for numerous acute as well as chronic health conditions. A nation's pharmaceutical sector needs to be appropriately structured and managed in order to ensure a safe, effective and quality supply of medicines to society. The process ...

The pharmaceutical corporation and the 'good work' of managing women's bodies.

Science.gov (United States)

Padamsee, Tasleem Juana

2011-04-01

Pharmaceutical companies are intricately intertwined with every aspect of contemporary medical reality, and they increasingly drive the social process of medicalization in order to establish and dominate markets for their drugs and devices. In addition to funding the majority of clinical research, organizing it to generate an evidence base that favors their innovations, and influencing the regulation of pharmaceutical drugs and devices, companies still spend substantial resources on direct attempts to shape the attitudes, dispositions, and prescribing behavior of physicians. This article sheds new light on our picture of the relationship between the pharmaceutical industry and physicians by examining a novel form of physician-directed communication produced by one prominent corporation. An interpretive, thematic analysis of ORGYN - the unique, full-length magazine published by the Organon Corporation between 1990 and 2003 - reveals two overarching messages it communicated to physicians during that period. First, it offered a compelling picture of the "good work" obstetricians and gynecologists do, which involves enabling women of reproductive age to control their fertility through contraception and infertility treatment, and providing symptom relief and preventive benefits to older women by increasing compliance with hormone therapy regimes. Second, it included pharmaceutical technology in every aspect of the doctor's work, portraying pharmaceutical corporations as the physician's "natural partner", and women patients as passive, disempowered objects of medical practice. Through these consistent messages, the print magazine ORGYN represented one important set of mechanisms by which a pharmaceutical corporation helped drive and sustain medicalization. The article ends with a consideration of the implications of ORGYN's messages for companies, doctors, women patients, and the study of medicalization. Copyright © 2011 Elsevier Ltd. All rights reserved.

Pharmaceutical cocrystals: an overview.

Science.gov (United States)

Qiao, Ning; Li, Mingzhong; Schlindwein, Walkiria; Malek, Nazneen; Davies, Angela; Trappitt, Gary

2011-10-31

Pharmaceutical cocrystals are emerging as a new class of solid drugs with improved physicochemical properties, which has attracted increased interests from both industrial and academic researchers. In this paper a brief and systematic overview of pharmaceutical cocrystals is provided, with particular focus on cocrystal design strategies, formation methods, physicochemical property studies, characterisation techniques, and recent theoretical developments in cocrystal screening and mechanisms of cocrystal formations. Examples of pharmaceutical cocrystals are also summarised in this paper. Copyright © 2011 Elsevier B.V. All rights reserved.

Recent advances in the applications of vibrational spectroscopic imaging and mapping to pharmaceutical formulations

Science.gov (United States)

Ewing, Andrew V.; Kazarian, Sergei G.

2018-05-01

Vibrational spectroscopic imaging and mapping approaches have continued in their development and applications for the analysis of pharmaceutical formulations. Obtaining spatially resolved chemical information about the distribution of different components within pharmaceutical formulations is integral for improving the understanding and quality of final drug products. This review aims to summarise some key advances of these technologies over recent years, primarily since 2010. An overview of FTIR, NIR, terahertz spectroscopic imaging and Raman mapping will be presented to give a perspective of the current state-of-the-art of these techniques for studying pharmaceutical samples. This will include their application to reveal spatial information of components that reveals molecular insight of polymorphic or structural changes, behaviour of formulations during dissolution experiments, uniformity of materials and detection of counterfeit products. Furthermore, new advancements will be presented that demonstrate the continuing novel applications of spectroscopic imaging and mapping, namely in FTIR spectroscopy, for studies of microfluidic devices. Whilst much of the recently developed work has been reported by academic groups, examples of the potential impacts of utilising these imaging and mapping technologies to support industrial applications have also been reviewed.

Advanced Continuous Flow Platform for On-Demand Pharmaceutical Manufacturing.

Science.gov (United States)

Zhang, Ping; Weeranoppanant, Nopphon; Thomas, Dale A; Tahara, Kohei; Stelzer, Torsten; Russell, Mary Grace; O'Mahony, Marcus; Myerson, Allan S; Lin, Hongkun; Kelly, Liam P; Jensen, Klavs F; Jamison, Timothy F; Dai, Chunhui; Cui, Yuqing; Briggs, Naomi; Beingessner, Rachel L; Adamo, Andrea

2018-02-21

As a demonstration of an alternative to the challenges faced with batch pharmaceutical manufacturing including the large production footprint and lengthy time-scale, we previously reported a refrigerator-sized continuous flow system for the on-demand production of essential medicines. Building on this technology, herein we report a second-generation, reconfigurable and 25 % smaller (by volume) continuous flow pharmaceutical manufacturing platform featuring advances in reaction and purification equipment. Consisting of two compact [0.7 (L)×0.5 (D)×1.3 m (H)] stand-alone units for synthesis and purification/formulation processes, the capabilities of this automated system are demonstrated with the synthesis of nicardipine hydrochloride and the production of concentrated liquid doses of ciprofloxacin hydrochloride, neostigmine methylsulfate and rufinamide that meet US Pharmacopeia standards. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

How might the Trans-Pacific Partnership impact on the pharmaceutical sector in Vietnam?

Science.gov (United States)

Binh, Nguyen Hoa; Anh, Pham Ngoc Kieu; Phuong, Nguyen Minh

2016-07-01

Ratification of the Trans-Pacific Partnership (TPP) will attract a large number of foreign drug companies in the coming years to Vietnam. It is anticipated to bring investment to Vietnam's pharmaceutical industries, lead to increased infrastructure and enable the use of more sophisticated technologies for the discovery, development and manufacture of drugs. However, with respect to pharmaceutical companies, which are producing generic drugs primarily, the availability of biologic will be reduced. Thus, the consequence is, an increase in drug cost resulting in difficulties for patients wishing to procure these drugs. This will be particularly detrimental for developing countries, such as Vietnam and Malaysia.

Design and Implementation of Electronic Batch Record Systems for Pharmaceutical Manufacturing Documentation

International Nuclear Information System (INIS)

Abdul Jalil Abd Hamid; Shafii Khamis; Rehir Dahalan

2011-01-01

Paper batch records have been used for decades to record procedures, the types and quantities of each material used, and the status of each step in the manufacturing process for both pharmaceuticals and medical devices. Although paper batch records are well established in its implementation, the system is laborious to maintain and prone to human error, particularly as manufacturing operations become increasingly complicated. Many pharmaceutical manufacturers are currently evaluating the feasibility of Electronic Batch Record (EBR) system. An integrated EBR system has been developed by Medical Technology Division of Nuclear Malaysia to monitor process and equipment used in the manufacture of pharmaceuticals and medical devices. The system architecture consists of an iPAN7 data processing system operating under Microsoft Windows Embedded CE 6.0 R2. The system serves as a common data bank and an input/output device for the iPAN7 processors. Full traceability from component material to finished product is maintained. Properly implemented, EBR eliminate paperwork, speed up information distribution, and provide useful tools for improving quality and efficiency. This paper discusses the general system requirements and specifications along with the hardware and software required to implement those requirements and specifications. Also discussed are problems which were encountered after initial development and plans for future development, and a plan for extending and commercializing this technology. (author)

Use and practice of achiral and chiral supercritical fluid chromatography in pharmaceutical analysis and purification.

Science.gov (United States)

Lemasson, Elise; Bertin, Sophie; West, Caroline

2016-01-01

The interest of pharmaceutical companies for complementary high-performance chromatographic tools to assess a product's purity or enhance this purity is on the rise. The high-throughput capability and economic benefits of supercritical fluid chromatography, but also the "green" aspect of CO2 as the principal solvent, render supercritical fluid chromatography very attractive for a wide range of pharmaceutical applications. The recent reintroduction of new robust instruments dedicated to supercritical fluid chromatography and the progress in stationary phase technology have also greatly benefited supercritical fluid chromatography. Additionally, it was shown several times that supercritical fluid chromatography could be orthogonal to reversed-phase high-performance liquid chromatography and could efficiently compete with it. Supercritical fluid chromatography is an adequate tool for small molecules of pharmaceutical interest: synthetic intermediates, active pharmaceutical ingredients, impurities, or degradation products. In this review, we first discuss about general chromatographic conditions for supercritical fluid chromatography analysis to better suit compounds of pharmaceutical interest. We also discuss about the use of achiral and chiral supercritical fluid chromatography for analytical purposes and the recent applications in these areas. The use of preparative supercritical fluid chromatography by pharmaceutical companies is also covered. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Electrosprayed nanoparticles for drug delivery and pharmaceutical applications

Science.gov (United States)

Sridhar, Radhakrishnan; Ramakrishna, Seeram

2013-01-01

Nanotechnology based Pharma has emerged significantly and has influenced the Pharma industry up to a considerable extent. Nanoparticles technology holds a good share of the nanotech Pharma and is significant in comparison with the other domains. Electrospraying technology answers the potential needs of nanoparticle production such as scalability, reproducibility, effective encapsulation etc. Many drugs have been electrosprayed with and without polymer carriers. Drug release characteristics are improved with the incorporation of biodegradable polymer carriers which sustain the release of encapsulated drug. Electrospraying is acknowledged as an important technique for the preparation of nanoparticles with respect to pharmaceutical applications. Herein we attempted to consolidate the reports pertaining to electrospraying and their corresponding therapeutic application area. PMID:23512013

A review of monitoring methods for pharmaceutical wet granulation.

Science.gov (United States)

Hansuld, E M; Briens, L

2014-09-10

High-shear wet granulation is commonly used in the pharmaceutical industry to improve powder properties for downstream processes such as tabletting. Granule growth, however, is difficult to predict because the process is sensitive to raw material properties and operating conditions. Development of process analytical technologies is encouraged by regulatory bodies to improve process understanding and monitor quality online. The primary technologies investigated for high-shear wet granulation monitoring include power consumption, near-infrared spectroscopy, Raman spectroscopy, capacitance measurements, microwave measurements, imaging, focused beam reflectance measurements, spatial filter velocimetry, stress and vibration measurements, as well as acoustic emissions. This review summarizes relevant research related to each of these technologies and discusses the challenges associated with each approach as a possible process analytical technology tool for high-shear wet granulation. Copyright © 2014 Elsevier B.V. All rights reserved.

Performance of new 400-MHz HTS power-driven magnet NMR technology on typical pharmaceutical API, cinacalcet HCl.

Science.gov (United States)

Silva Elipe, Maria Victoria; Donovan, Neil; Krull, Robert; Pooke, Donald; Colson, Kimberly L

2018-04-17

After years towards higher field strength magnets, nuclear magnetic resonance (NMR) technology in commercial instruments in the past decade has expanded at low and high magnetic fields to take advantage of new opportunities. At lower field strengths, permanent magnets are well established, whereas for midrange and high field, developments utilize superconducting magnets cooled with cryogenic liquids. Recently, the desire to locate NMR spectrometers in nontypical NMR laboratories has created interest in the development of cryogen-free magnets. These magnets require no cryogenic maintenance, eliminating routine filling and large cryogen dewars in the facility. Risks of spontaneous quenches and safety concerns when working with cryogenic liquids are eliminated. The highest field commercially available cryogen-free NMR magnet previously reported was at 4.7 T in 2013. Here we tested a prototype cryogen-free 9.4-T power-driven high-temperature-superconducting (HTS) magnet mated to commercial NMR spectrometer electronics. We chose cinacalcet HCl, a typical active pharmaceutical ingredient, to evaluate its performance towards structure elucidation. Satisfactory standard 1D and 2D homonuclear and heteronuclear NMR results were obtained and compared with those from a standard 9.4-T cryogenically cooled superconducting NMR instrument. The results were similar between both systems with minor differences. Further comparison with different shims and probes in the HTS magnet system confirmed that the magnet homogeneity profile could be matched with commercially available NMR equipment for optimal results. We conclude that HTS magnet technology works well providing results comparable with those of standard instruments, leading us to investigate additional applications for this magnet technology outside a traditional NMR facility. Copyright © 2018 John Wiley & Sons, Ltd.

Electrochemical biosensors in pharmaceutical analysis

OpenAIRE

Gil, Eric de Souza; Melo, Giselle Rodrigues de

2010-01-01

Given the increasing demand for practical and low-cost analytical techniques, biosensors have attracted attention for use in the quality analysis of drugs, medicines, and other analytes of interest in the pharmaceutical area. Biosensors allow quantification not only of the active component in pharmaceutical formulations, but also the analysis of degradation products and metabolites in biological fluids. Thus, this article presents a brief review of biosensor use in pharmaceutical analysis, fo...

Can Microalgae Remove Pharmaceutical Contaminants from Water?

Science.gov (United States)

Xiong, Jiu-Qiang; Kurade, Mayur B; Jeon, Byong-Hun

2018-01-01

The increase in worldwide water contamination with numerous pharmaceutical contaminants (PCs) has become an emerging environmental concern due to their considerable ecotoxicities and associated health issues. Microalgae-mediated bioremediation of PCs has recently gained scientific attention, as microalgal bioremediation is a solar-power driven, ecologically comprehensive, and sustainable reclamation strategy. In this review, we comprehensively describe the current research on the possible roles and applications of microalgae for removing PCs from aqueous media. We summarize several novel approaches including constructing microbial consortia, acclimation, and cometabolism for enhanced removal of PCs by microalgae, which would improve practical feasibility of these technologies. Some novel concepts for degrading PCs using integrated processes and genetic modifications to realize algal-based bioremediation technologies are also recommended. Copyright © 2017 Elsevier Ltd. All rights reserved.

Expanding Canadian Medicare to include a national pharmaceutical benefit while controlling expenditures: possible lessons from Israel.

Science.gov (United States)

Rosen, Bruce

2018-02-05

In Canada, there is an ongoing debate about whether to expand Medicare to include a national pharmaceutical benefit on a universal basis. The potential health benefits are understood to be significant, but there are ongoing concerns about affordability. In Israel, the National Health Insurance benefits package includes a comprehensive pharmaceutical benefit. Nonetheless, per capita pharmaceutical spending is well below that of Canada and the Organization for Economic Co-operation and Development average. This paper highlights seven strategies that Israel has employed to constrain pharmaceutical spending: (1) prioritizing new technologies, subject to a global budget constraint; (2) using regulations and market power to secure fair and reasonable prices; (3) establishing an efficient pharmaceutical distribution system; (4) promoting effective prescribing behavior; (5) avoiding artificial inflation of consumer demand; (6) striking an appropriate balance between respect for IP rights, access and cost containment; and (7) developing a shared societal understanding about the value and limits of pharmaceutical spending. Some of these strategies are already in place in some parts of Canada. Others could be introduced into Canada, and might contribute to the affordability of a national pharmaceutical benefit, but substantial adaptation would be needed. For example, in Israel the health maintenance organizations (HMOs) play a central role in promoting effective prescribing behavior, whereas in HMO-free Canada other mechanisms are needed to advance this important goal.

Pharmaceuticals labelled with stable isotopes

International Nuclear Information System (INIS)

Krumbiegel, P.

1986-11-01

The relatively new field of pharmaceuticals labelled with stable isotopes is reviewed. Scientific, juridical, and ethical questions are discussed concerning the application of these pharmaceuticals in human medicine. 13 C, 15 N, and 2 H are the stable isotopes mainly utilized in metabolic function tests. Methodical contributions are given to the application of 2 H, 13 C, and 15 N pharmaceuticals showing new aspects and different states of development in the field under discussion. (author)

Markets and Molecules: A Pharmaceutical Primer from the South.

Science.gov (United States)

Banerjee, Dwaipayan

2017-01-01

The Indian pharmaceutical industry has historically manufactured low-cost drugs for the global poor. Activist mobilizations at the height of the HIV/AIDS epidemic revealed a vast cost gap between global brands and Indian generics, much to the embarrassment of Euro-American corporations that were in the habit of pricing drugs for only the wealthy or well insured. As new drug access controversies focus on anticancer therapies, they reveal new flows of international capital, emergent genetic technologies, and increasingly coercive trade regimes. Together these favor multinational corporate oligopolies, which imperil the legacy of HIV/AIDS activism and the future availability of essential life-saving drugs for the work of global public health. In this essay, I describe how the future of the right to drug access rests uneasily, and potentially calamitously, on a shifting balance of power between global south interests and Euro-American pharmaceutical capital.

Política farmacéutica saludable Healthy pharmaceutical policy

Directory of Open Access Journals (Sweden)

Eduardo González Pier

2008-01-01

Full Text Available Hoy en día, la industria farmacéutica se encuentra en una transición profunda. La globalización y el avance tecnológico representan las principales presiones de cambio para un mercado mundial de medicamentos donde a este tipo de industria le resulta cada vez más difícil recuperar de forma eficiente los costos crecientes de la innovación. México debe analizar las implicaciones en el ámbito político de estos factores de cambio y promover, en el mercado de medicamentos, una política que incremente al máximo las ganancias de salud de los recursos invertidos. La política de medicamentos ofrece un raro ejemplo de complementariedad entre una buena política de salud y una política económica eficiente, es decir, una "política farmacéutica saludable".Today, the pharmaceutical industry is experiencing a profound transition. Globalization and technological advancement represent the principal pressures for change in the market, where it is increasingly more difficult for this type of industry to efficiently recoup the growing cost of innovation. Mexico needs to analyze the policy implications of these change factors and promote, in the pharmaceutical market, policies that maximize health gains on invested resources. Pharmaceutical policy offers a rare example for a complementary approach between a sound health policy and an efficient economic policy; that is, a "healthy pharmaceutical policy."

Interactions and incompatibilities of pharmaceutical excipients with active pharmaceutical ingredients: a comprehensive review

Directory of Open Access Journals (Sweden)

Sonali S. Bharate

2010-09-01

Full Text Available Studies of active drug/excipient compatibility represent an important phase in the preformulation stage of the development of all dosage forms. The potential physical and chemical interactions between drugs and excipients can affect the chemical nature, the stability and bioavailability of drugs and, consequently, their therapeutic efficacy and safety. The present review covers the literature reports of interaction and incompatibilities of commonly used pharmaceutical excipients with different active pharmaceutical ingredients in solid dosage forms. Examples of active drug/excipient interactions, such as transacylation, the Maillard browning reaction, acid base reactions and physical changes are discussed for different active pharmaceutical ingredients belonging to different therapeutic categories viz antiviral, anti-inflammatory, antidiabetic, antihypertensive, anti-convulsant, antibiotic, bronchodialator, antimalarial, antiemetic, antiamoebic, antipsychotic, antidepressant, anticancer, anticoagulant and sedative/hypnotic drugs and vitamins. Once the solid-state reactions of a pharmaceutical system are understood, the necessary steps can be taken to avoid reactivity and improve the stability of drug substances and products.

Using the Analytic Network Process (ANP) to assess the distribution of pharmaceuticals in hospitals – a comparative case study of a Danish and American hospital

DEFF Research Database (Denmark)

Feibert, Diana Cordes; Sørup, Christian Michel; Jacobsen, Peter

2016-01-01

Pharmaceuticals are a vital part of patient treatment and the timely delivery of pharmaceuticals to patients is therefore important. Hospitals are complex systems that provide a challenging environment for decision making. Implementing process changes and technologies to improve the pharmaceutical...... distribution process can therefore be a complex and challenging undertaking. A comparative case study was conducted benchmarking the pharmaceutical distribution process at a Danish and US hospital to identify best practices. Using the ANP method, taking tangible and intangible aspects into consideration...

Investigating physical properties of solid dosage forms during pharmaceutical processing : Process analytical applications of vibrational spectroscopy

OpenAIRE

Römer, Meike

2008-01-01

In order to improve and continuously develop the quality of pharmaceutical products, the process analytical technology (PAT) framework has been adopted by the US Food and Drug Administration. One of the aims of PAT is to identify critical process parameters and their effect on the quality of the final product. Real time analysis of the process data enables better control of the processes to obtain a high quality product. The main purpose of this work was to monitor crucial pharmaceutical...

[PICS: pharmaceutical inspection cooperation scheme].

Science.gov (United States)

Morénas, J

2009-01-01

The pharmaceutical inspection cooperation scheme (PICS) is a structure containing 34 participating authorities located worldwide (October 2008). It has been created in 1995 on the basis of the pharmaceutical inspection convention (PIC) settled by the European free trade association (EFTA) in1970. This scheme has different goals as to be an international recognised body in the field of good manufacturing practices (GMP), for training inspectors (by the way of an annual seminar and experts circles related notably to active pharmaceutical ingredients [API], quality risk management, computerized systems, useful for the writing of inspection's aide-memoires). PICS is also leading to high standards for GMP inspectorates (through regular crossed audits) and being a room for exchanges on technical matters between inspectors but also between inspectors and pharmaceutical industry.

Recognizing misleading pharmaceutical marketing online.

Science.gov (United States)

De Freitas, Julian; Falls, Brian A; Haque, Omar S; Bursztajn, Harold J

2014-01-01

In light of decision-making psychology, this article details how drug marketing operates across established and novel web domains and identifies some common misleading trends and influences on prescribing and patient-initiated medication requests. The Internet has allowed pharmaceutical marketing to become more salient than ever before. Although the Internet's growth has improved the dissemination of pharmaceutical information, it has also led to the increased influence of misleading pharmaceutical marketing. Such mismarketing is of concern, especially in psychiatry, since psychotropics generate considerable revenue for drug companies. In a climate of resource-limited drug regulation and time-strapped physicians, we recommend improving both independent monitoring and consumer awareness of Internet-enabled, potentially misleading, pharmaceutical marketing influences. © 2014 American Academy of Psychiatry and the Law.

Pharmaceutical Additive Manufacturing: a Novel Tool for Complex and Personalized Drug Delivery Systems.

Science.gov (United States)

Zhang, Jiaxiang; Vo, Anh Q; Feng, Xin; Bandari, Suresh; Repka, Michael A

2018-06-25

Inter-individual variability is always an issue when treating patients of different races, genders, ages, pharmacogenetics, and pharmacokinetic characteristics. However, the development of novel dosage forms is limited by the huge investments required for production line modifications and dosages diversity. Additive manufacturing (AM) or 3D printing can be a novel alternative solution for the development of controlled release dosages because it can produce personalized or unique dosage forms and more complex drug-release profiles. The primary objective of this manuscript is to review the 3D printing processes that have been used in the pharmaceutical area, including their general aspects, materials, and the operation of each AM technique. Advantages and shortcomings of the technologies are discussed with respect to practice and practical applications. Thus, this review will provide an overview and discussion on advanced pharmaceutical AM technologies, which can be used to produce unique controlled drug delivery systems and personalized dosages for the future of personalized medicine.

Pharmaceutical care in Kuwait: hospital pharmacists' perspectives.

Science.gov (United States)

Katoue, Maram G; Awad, Abdelmoneim I; Schwinghammer, Terry L; Kombian, Samuel B

2014-12-01

Pharmaceutical care practice has been championed as the primary mission of the pharmacy profession, but its implementation has been suboptimal in many developing countries including Kuwait. Pharmacists must have sufficient knowledge, skills, and positive attitudes to practise pharmaceutical care, and barriers in the pharmacy practice model must be overcome before pharmaceutical care can be broadly implemented in a given healthcare system. To investigate hospital pharmacists' attitudes towards pharmaceutical care, perceptions of their preparedness to provide pharmaceutical care, and the barriers to its implementation in Kuwait. Six general hospitals, eight specialized hospitals and seven specialized health centers in Kuwait. A descriptive, cross-sectional survey was distributed to all pharmacists working in the governmental hospitals in Kuwait (385 pharmacists). Data were collected via a pre-tested self-administered questionnaire. Descriptive statistics including percentages, medians and means Likert scale rating (standard deviations) were calculated and compared using statistical package for social sciences, version 20. Statistical significance was accepted at a p value of Kuwait. Completed surveys were received from 250 (64.9%) of the 385 pharmacists. Pharmacists expressed overall positive attitudes towards pharmaceutical care. They felt well prepared to implement the various aspects of pharmaceutical care, with the least preparedness in the administrative/management aspects. Pharmacists with more practice experience expressed significantly more positive attitudes towards pharmaceutical care (p = 0.001) and they felt better prepared to provide pharmaceutical care competencies (p Kuwait advocate implementation of pharmaceutical care while also appreciating the organizational, technical and professional barriers to its widespread adoption. Collaborative efforts between health authorities and educational institutions, and the integration of innovative approaches in

U.S. News Media Coverage of Pharmaceutical Pollution in the Aquatic Environment: A Content Analysis of the Problems and Solutions Presented by Actors.

Science.gov (United States)

Blair, Benjamin; Zimny-Schmitt, Daniel; Rudd, Murray A

2017-08-01

Pharmaceutical pollution in the aquatic environment is an issue of concern that has attracted attention by the news media. Understanding the factors that contribute to media framing of pharmaceutical pollution may lead to a better understanding of the management and governance of this issue, including why these pollutants are generally unregulated at this time. This study conducted a content analysis of 405 newspaper articles (81 had substantive information on the topic) from 2007 to 2014, using the search terms "water" and "pharmaceuticals" in the Chicago Tribune, Denver Post, Los Angeles Times, New York Daily News, New York Times, USA Today, Wall Street Journal, and Washington Post. We sought to analyze the factors that contributed to the news media presentation of pharmaceutical pollution in the United States, including the presentation of the risks/safety and solutions by various actors. We found that the primary issues in the news media were uncertainty regarding public health and harm to the environment. The primary solutions recommended within the news media were implementing additional water treatment technologies, taking unused pharmaceuticals to predetermined sites for disposal (take-back programs), and trash disposal of unused pharmaceuticals. Water utilities and scientists presented improved water treatment technology, government actors presented take-back programs, and pharmaceutical representatives, while sparsely involved in the news media, presented trash disposal as their primary solutions. To advance the understanding of the management of pharmaceutical pollution, this article offers further insight into the debate and potential solutions within the news media presentation of this complex scientific topic.

U.S. News Media Coverage of Pharmaceutical Pollution in the Aquatic Environment: A Content Analysis of the Problems and Solutions Presented by Actors

Science.gov (United States)

Blair, Benjamin; Zimny-Schmitt, Daniel; Rudd, Murray A.

2017-08-01

Pharmaceutical pollution in the aquatic environment is an issue of concern that has attracted attention by the news media. Understanding the factors that contribute to media framing of pharmaceutical pollution may lead to a better understanding of the management and governance of this issue, including why these pollutants are generally unregulated at this time. This study conducted a content analysis of 405 newspaper articles (81 had substantive information on the topic) from 2007 to 2014, using the search terms "water" and "pharmaceuticals" in the Chicago Tribune, Denver Post, Los Angeles Times, New York Daily News, New York Times, USA Today, Wall Street Journal, and Washington Post. We sought to analyze the factors that contributed to the news media presentation of pharmaceutical pollution in the United States, including the presentation of the risks/safety and solutions by various actors. We found that the primary issues in the news media were uncertainty regarding public health and harm to the environment. The primary solutions recommended within the news media were implementing additional water treatment technologies, taking unused pharmaceuticals to predetermined sites for disposal (take-back programs), and trash disposal of unused pharmaceuticals. Water utilities and scientists presented improved water treatment technology, government actors presented take-back programs, and pharmaceutical representatives, while sparsely involved in the news media, presented trash disposal as their primary solutions. To advance the understanding of the management of pharmaceutical pollution, this article offers further insight into the debate and potential solutions within the news media presentation of this complex scientific topic.

High-Resolution Solid-State NMR Spectroscopy: Characterization of Polymorphism in Cimetidine, a Pharmaceutical Compound

Science.gov (United States)

Pacilio, Julia E.; Tokarski, John T.; Quiñones, Rosalynn; Iuliucci, Robbie J.

2014-01-01

High-resolution solid-state NMR (SSNMR) spectroscopy has many advantages as a tool to characterize solid-phase material that finds applications in polymer chemistry, nanotechnology, materials science, biomolecular structure determination, and others, including the pharmaceutical industry. The technology associated with achieving high resolution…

A CONTENT ANALYSIS OF THE MISSION STATEMENTS OF IRAN, TURKEY, INDIA AND UNITED STATES PHARMACEUTICAL COMPANIES

Directory of Open Access Journals (Sweden)

Shahriar AZIZI

2014-06-01

Full Text Available Pharmaceutical companies play a critical role in healthcare economy. Articulating mission statement of a Pharmaceutical company results in guiding strategies and activities of the firm. In this survey, mission statements of Iranian, Turkish, Indian and American pharmaceutical companies are analyzed. By using content analysis, frequencies of nine elements of the mission statement according to Fred R. David including: customers, product/service, market, technology, survival/growth/profitability, philosophy, self-perception, public image and employee were investigated. 98 mission statements of pharmaceutical companies (32 iranain companies, 16 Turkish companies, 30 Indian companies, and 20 American companies were analyzed. Simple correspondence analysis was used to extract the perceptual map. Results indicate that two dimensions of perceptual map include: focus of mission (throughput or input/output, and focus of mission elements (market or support. Iranian companies placed on the quarter of throughput /support, American and Turkish companies placed on the quarter of throughput/market. Indian companies placed on the quarter of input and output/market.

Container-content compatibility studies: a pharmaceutical team's integrated approach.

Science.gov (United States)

Laschi, Alda; Sehnal, Natacha; Alarcon, Antoine; Barcelo, Beatrice; Caire-Maurisier, François; Delaire, Myriam; Feuilloley, Marc; Genot, Stéphanie; Lacaze, Catherine; Pisarik, Luc; Smati, Christophe

2009-01-01

Container-content compatibility studies are required as part of the submission of a new product market authorization file or for a change relating to the primary product-contact packaging. Many regulatory publications and guidances are available in the USA, Europe, and Japan. However these publications and guidances are not sufficiently precise enough to allow for consistent interpretation and implementation of the technical requirements. A working group has been formed by the French Society of Pharmaceutical Science and Technology (SFSTP) in order to propose guidance for container-content interaction studies that meet both European and US requirements, and allows consistent and standardized information to be presented by the industry to the regulators. When a pharmaceutical drug product remains in prolonged contact with a material, the two critical points to consider are the drug product's quality and safety. A pharmaceutical evaluation of the container-content relationship should be done based on the knowledge of the contact material (e.g., type, physicochemical properties), its manufacturing processes (e.g., the type of sterilization that could potentially alter the interactions), and the formulation components involved in contact with this material (e.g., physicochemical properties, pharmaceutical presentation, route of administration). Quality is evaluated using the stability study performed on the product. Safety is partially evaluated with the stability study and is analyzed in conjunction with toxicity testing, specifically with cytotoxicity testing. The toxicity aspect is the key point of the container-content compatibility study and of patient safety. Migration tests are conducted when an interaction is suspected, or found based on previous results, to identify the component responsible for this interaction and to help select a new material if needed. Therefore, such tests are perhaps not the best ones to use for the purpose of safety evaluation

The role of cocrystals in pharmaceutical science.

Science.gov (United States)

Shan, Ning; Zaworotko, Michael J

2008-05-01

Pharmaceutical cocrystals, a subset of a long known but little-studied class of compounds, represent an emerging class of crystal forms in the context of pharmaceutical science. They are attractive to pharmaceutical scientists because they can significantly diversify the number of crystal forms that exist for a particular active pharmaceutical ingredient (API), and they can lead to improvements in physical properties of clinical relevance. In this article we address pharmaceutical cocrystals from the perspective of design (crystal engineering) and present a series of case studies that demonstrate how they can enhance the solubility, bioavailability, and/or stability of API crystal forms.

Entrepreneurial patent management in pharmaceutical startups.

Science.gov (United States)

Holgersson, Marcus; Phan, Tai; Hedner, Thomas

2016-07-01

Startups fill an increasingly important role as innovators in the pharmaceutical industry, and patenting is typically central to their success. This article aims to explore patent management in pharmaceutical startups. The results show that startups need to deal with several challenges related to patenting and an 'entrepreneurial' approach to patent management is called for. Resource constraints, venture capital provision, exits and other conditions and events must be readily considered in the patent management process to build a successful pharmaceutical venture, something that could benefit the pharmaceutical industry as a whole. Copyright © 2016 Elsevier Ltd. All rights reserved.

Introduction: Institutional corruption and the pharmaceutical policy.

Science.gov (United States)

Rodwin, Marc A

2013-01-01

Today, the goals of pharmaceutical policy and medical practice are often undermined due to institutional corruption - that is, widespread or systemic practices, usually legal, that undermine an institution's objectives or integrity. In this symposium, 16 articles investigate the corruption of pharmaceutical policy, each taking a different look at the sources of corruption, how it occurs, and what is corrupted. We will see that the pharmaceutical industry's own purposes are often undermined. Furthermore, pharmaceutical industry funding of election campaigns and lobbying skews the legislative process that sets pharmaceutical policy. Moreover, certain practices have corrupted medical research, the production of medical knowledge, the practice of medicine, drug safety, the Food and Drug Administration's oversight of the pharmaceutical market, and the trustworthiness of patient advocacy organizations. © 2013 American Society of Law, Medicine & Ethics, Inc.

Energy Efficiency Improvement and Cost Saving Opportunities for the Pharmaceutical Industry. An ENERGY STAR Guide for Energy and Plant Managers

Energy Technology Data Exchange (ETDEWEB)

Galitsky, Christina; Galitsky, Christina; Chang, Sheng-chieh; Worrell, Ernst; Masanet, Eric

2008-03-01

The U.S. pharmaceutical industry consumes almost $1 billion in energy annually. Energy efficiency improvement is an important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility. There are a variety of opportunities available at individual plants in the U.S. pharmaceutical industry to reduce energy consumption in a cost-effective manner. This Energy Guide discusses energy efficiency practices and energy efficient technologies that can be implemented at the component, process, system, and organizational levels. A discussion of the trends, structure, and energy consumption characteristics of the U.S. pharmaceutical industry is provided along with a description of the major process steps in the pharmaceutical manufacturing process. Expected savings in energy and energy-related costs are given for many energy efficiency measures, based on case study data from real-world applications in pharmaceutical and related facilities worldwide. Typical measure payback periods and references to further information in the technical literature are also provided, when available. The information in this Energy Guide is intended to help energy and plant managers reduce energy consumption in a cost-effective manner while meeting regulatory requirements and maintaining the quality of products manufactured. At individual plants, further research on the economics of the measures?as well as their applicability to different production practices?is needed to assess potential implementation of selected technologies.

Integrating systems Approaches into Pharmaceutical Sciences

DEFF Research Database (Denmark)

Westerhoff, H.V.; Mosekilde, Erik; Noe, C. R.

2008-01-01

During the first week of December 2007, the European Federation for Pharmaceutical Sciences (EUFEPS) and BioSim, the major European Network of Excellence on Systems Biology, held a challenging conference on the use of mathematical models in the drug development process. More precisely, the purpose...... of the conference was to promote the ‘Integration of Systems Approaches into Pharmaceutical Sciences’ in view of optimising the development of new effective drugs. And a challenge this is, considering both the high attrition rates in the pharmaceutical industry and the failure of finding definitive drug solutions...... for many of the diseases that plague mankind today. The conference was co-sponsored by the American College of Clinical Pharmacology, the European Center for Pharmaceutical Medicine, and the Swiss Society of Pharmaceutical Sciences and, besides representatives from the European Regulatory Agencies and FDA...

Grid computing in large pharmaceutical molecular modeling.

Science.gov (United States)

Claus, Brian L; Johnson, Stephen R

2008-07-01

Most major pharmaceutical companies have employed grid computing to expand their compute resources with the intention of minimizing additional financial expenditure. Historically, one of the issues restricting widespread utilization of the grid resources in molecular modeling is the limited set of suitable applications amenable to coarse-grained parallelization. Recent advances in grid infrastructure technology coupled with advances in application research and redesign will enable fine-grained parallel problems, such as quantum mechanics and molecular dynamics, which were previously inaccessible to the grid environment. This will enable new science as well as increase resource flexibility to load balance and schedule existing workloads.

The Effectiveness of Pharmaceutical Marketing

NARCIS (Netherlands)

E.R. Kappe

2011-01-01

textabstractPharmaceutical marketing effectiveness comprises the measurement of marketing efforts of pharmaceutical firms towards doctors and patients. These firms spend billions of dollars yearly to promote their prescription drugs. This dissertation provides empirical analyses and methods to

ANALYSIS OF SCIENTIFIC RESEARCHES IN PHARMACEUTICAL PROMOTION GLOBALLY: TOWARDS INTERNATIONALLY DEVELOPING PRACTICALLY-ORIENTED GUIDELINES FOR PHARMACEUTICAL COMPANIES

Directory of Open Access Journals (Sweden)

M. M. Bahlol

2016-01-01

Full Text Available Purpose. Pharmaceutical industry is transnational and globally important. Many pharmaceutical companies operate their business in multinational and international forms in different countries. Diverse researches from different countries indicated and confirmed marketing promotion importance in pharmaceutical field. Therefore, marketing promotion and its effects are a very important issue that should be globally investigated in real life and evidence context. We oriented our research according to these scientific and practical values.Methodology. We reviewed pharmaceutical marketing promotion researches from more than 25 different countries, e.g., USA, Canada, Italy, France, Russia, India, Egypt and Syria where we employed our knowledge of three widely spread languages, i.e., English, Russian and Arabic. Such language variation supports us with large and variable amount of scientific knowledge, deep understanding and ability of analysis. Some studies investigated average response to pharmaceutical marketing promotion and few studies took into consideration heterogeneity in their effects with respect to advertising medium or drug characteristics.Originality. We investigated empirical evidences of pharmaceutical marketing promotion that can be directed to either consumer or healthcare professionals.Findings. We extracted, gathered and associated information of pharmaceutical promotion globally which oriented us to several evidence and practical facts with regard to employing promotion tools in different definite situations pertinent to main directions; their welfare and health enhancing effects and adverse effects. Practical Implications- Consequently, we developed practically-oriented guidelines for companies concerning pharmaceutical promotion globally ate the end of this paper.

78 FR 59409 - In the Matter of AcuNetx, Inc., Alliance Pharmaceutical Corp., BBV Vietnam SE.A. Acquisition Corp...

Science.gov (United States)

2013-09-26

... Pharmaceutical Corp., BBV Vietnam SE.A. Acquisition Corp., Cash Technologies, Inc., Conspiracy Entertainment... that there is a lack of current and accurate information concerning the securities of Cash Technologies... concerning the securities of Conspiracy Entertainment Holdings, Inc. because it has not filed any periodic...

[Bioequivalence studies of pharmaceutical preparations].

Science.gov (United States)

Vetchý, D; Frýbortová, K; Rabisková, M; Danecková, H

2007-01-01

Bioequivalence studies are very important for the development of a pharmaceutical preparation in the pharmaceutical industry. Their rationale is the monitoring of pharmacokinetic and pharmacodynamic parameters after the administration of tested drugs. The target of such study is to evaluate the therapeutic compatibility of tested drugs (pharmaceutical equivalents or pharmaceutical alternatives). The importance of bioequivalence studies is increasing also due to the large growth of the production and consumption of generic products. Generic products represent approximately 50 % of the whole consumption in many European countries and USA. The search output of bioequivalence study is together with the pharmaceutical quality data of medical product one of the main part of the registration file submitted to a national regulatory authorities. The registration of generic products does not demand complicated and expensive clinical study contrary to original product. The comparison of the original and the generic product via bioequivalence study is suggested as sufficient. The aim of this article is to provide to a medical public a summary about the types of bioequivalence studies, their range, rules of their practise and let them gain their own attitude to this question.

Safety and clinical efficacy of some radiation-sterilized medical products and pharmaceuticals

International Nuclear Information System (INIS)

Kulkarni, R.D.; Gopal, N.G.S.

1975-01-01

Medical products and pharmaceuticals must conform to certain minimum physico-chemical microbiological and biological requirements. The biological requirements comprise principally testing for toxicity, safety, and pyrogens. Besides the above-mentioned criteria, there are two other important characteristics, viz. clinical efficacy and tolerance in animal and/or human beings. These latter requirements, expected from the final product released for general human use, are not carried out routinely. In the present-day pharmaceutical and medical technology, numerous mew products are appearing, many of them requiring radiation sterilization as they are not stable towards the other conventional methods of sterilization. While the post-irradiation physicochemical changes in a product may not be significant, the bio-availability or biological activity of the product may be affected to a more significant extent. Some evidence of this has recently been reported. Hence, it is desirable to carry out studies on safety as well as clinical efficacy on irradiated products. This paper describes some studies on plastic-based medical products, a pharmaceutical raw material, a typical infusion fluid such as normal saline, antibiotics and their ointments. (author)

A Method to Identify Best Available Technologies (BAT) for Hydrogenation Reactors in the Pharmaceutical Industry

Czech Academy of Sciences Publication Activity Database

Le Doan, T.V.; Stavárek, Petr; de Bellefon, C.

2012-01-01

Roč. 2, č. 3 (2012), s. 77-82 ISSN 2062-249X Grant - others:IMPULSE(XE) FP6-NMP2-CT-2005-011816 Institutional support: RVO:67985858 Keywords : hydrogenation * pharmaceuticals * methodology Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 4.091, year: 2012

[The role of biotechnology in pharmaceutical drug design].

Science.gov (United States)

Gaisser, Sibylle; Nusser, Michael

2010-01-01

Biotechnological methods have become an important tool in pharmaceutical drug research and development. Today approximately 15 % of drug revenues are derived from biopharmaceuticals. The most relevant indications are oncology, metabolic disorders and disorders of the musculoskeletal system. For the future it can be expected that the relevance of biopharmaceuticals will further increase. Currently, the share of substances in preclinical testing that rely on biotechnology is more than 25 % of all substances in preclinical testing. Products for the treatment of cancer, metabolic disorders and infectious diseases are most important. New therapeutic approaches such as RNA interference only play a minor role in current commercial drug research and development with 1.5 % of all biological preclinical substances. Investments in sustainable high technology such as biotechnology are of vital importance for a highly developed country like Germany because of its lack of raw materials. Biotechnology helps the pharmaceutical industry to develop new products, new processes, methods and services and to improve existing ones. Thus, international competitiveness can be strengthened, new jobs can be created and existing jobs preserved.

Marketing orientation in pharmaceutical industry

Directory of Open Access Journals (Sweden)

Prošić Danica

2006-01-01

Full Text Available Pharmaceutical companies are major stakeholders in the global health agenda Virtually all drugs used by patients in Europe reach markets through the promotion tactics of a small number of corporations with a tremendous impact on global health. The sector is both fast growing and highly profitable. Effective marketing strategies are a crucial ingredient in making sure pharmaceutical products and profits flow in a virtuous cycle. At first glance, the relationship between doctors and drug companies, as well as advertising practices for over-the-counter medication, appears tightly regulated. According to many consumer organizations, drug promotion in Europe today can be characterized as nice and friendly marketing. This refers to the creation of a false sense of trust that consumers associate with branded pharmaceutical products, as a result of pharmaceutical marketing efforts disguised as genuine corporate responsibility.

National transparency assessment of Kuwait's pharmaceutical sector.

Science.gov (United States)

Badawi, Dalia A; Alkhamis, Yousif; Qaddoumi, Mohammad; Behbehani, Kazem

2015-09-01

Corruption is one of several factors that may hinder the access to pharmaceuticals. Since Kuwait has the highest per-capita spending on pharmaceuticals in the region, we wanted to evaluate the level of transparency in its pharmaceutical sector using an established assessment tool adapted by the World Health Organization. Standardized questionnaires were conducted via semi-structured interviews with key informants to measure the level of transparency in eight functions of the public pharmaceutical sector. The scores for the degree of vulnerability to corruption reflected marginal to moderate venerability to corruption for most pharmaceutical sectors. The perceived strengths included availability of appropriate laws, the presence of clear standard operating procedures, and the use of an efficient registration/distribution system. Weaknesses included lack of conflict of interest guidelines and written terms of reference, absence of pharmacoeconomic studies, and inconsistencies in law enforcement. Findings reveal that few functions of Kuwait pharmaceutical sector remain fairly vulnerable to corruption. However, the willingness of Kuwait Ministry of Health to adopt the assessment study and the acknowledgement of the weaknesses of current processes of the pharmaceutical sector may assist to achieve a transparent pharmaceutical system in the near future. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Strategic Management of Innovations at Pharmaceutical Enterprises

Directory of Open Access Journals (Sweden)

Honcharova Svіtlana Yu.

2014-01-01

Full Text Available The article is devoted to theoretical and practical issues of the use of the concept of strategic management of innovations at pharmaceutical enterprises. It studies main barriers, which restrict development of Ukrainian pharmaceutical enterprises. It analyses the state and tendencies of development of innovation activity of pharmaceutical enterprises and studies foreign experience of innovation activity. It marks out specific features of strategic management of innovation development in pharmaceutical industry. It specifies the role and advantages of methods of strategic analysis in the system of management of a pharmaceutical enterprise. It considers the essence of “innovation development” and “innovation model of development” notions and analyses their organisational and legal provision. It justifies strategic tasks of the pharmaceutical filed to focus on in order to achieve a breakthrough when building an innovation model of economic development. The article proves that the most important factors that ensure growth of efficiency of pharmaceutical production are: wide application of the concept of strategic management and creation of innovations.

Rheology in Pharmaceutical Sciences

DEFF Research Database (Denmark)

Aho, Johanna; Hvidt, Søren; Baldursdottir, Stefania

2016-01-01

Rheology is the science of flow and deformation of matter. Particularly gels and non-Newtonian fluids, which exhibit complex flow behavior, are frequently encountered in pharmaceutical engineering and manufacturing, or when dealing with various in vivo fluids. Therefore understanding rheology......, together with the common measurement techniques and their practical applications. Examples of the use of rheological techniques in the pharmaceutical field, as well as other closely related fields such as food and polymer science, are also given....... is important, and the ability to use rheological characterization tools is of great importance for any pharmaceutical scientist involved in the field. Flow can be generated by shear or extensional deformations, or a combination of both. This chapter introduces the basics of both shear and extensional rheology...

Pharmaceutical Public-Private Partnerships

DEFF Research Database (Denmark)

Bagley, Constance; Tvarnø, Christina D.

2014-01-01

This article provides a game theory and law-and-management analysis of for- profit pharmaceutical public-private partnerships, a complex type of legal arrangement in the highly regulated pharmaceutical industry. A pharmaceutical public-private partnership (PPPP) agreement is a legally binding...... and a practical perspective on how properly crafted PPPP arrangements can promote innovation more efficiently than traditional self-optimizing contracts. In particular, a properly framed binding contract, coupled with respect for positive incentives, can move the parties away from an inefficient prisoners...... systems to build and share innovation. When coupled with appropriate attention to the difficult task of coordinating the actions of interdependent actors, a PPPP arrangement can enhance the likelihood of successful commercialization of pharmacological discoveries by flipping the par- ties’ incentives...

Pharmaceutical lobbying in Brazil: a missing topic in the public health research agenda.

Science.gov (United States)

Paumgartten, Francisco José Roma

2016-12-22

In the US, where registration of lobbyists is mandatory, the pharmaceutical industry and private health-care providers spend huge amounts of money seeking to influence health policies and government decisions. In Brazil, where lobbying lacks transparency, there is virtually no data on drug industry expenditure to persuade legislators and government officials of their viewpoints and to influence decision-making according to commercial interests. Since 1990, however, the Associação da Indústria Farmacêutica de Pesquisa (Interfarma - Pharmaceutical Research Industry Association), Brazilian counterpart of the Pharmaceutical Research and Manufacturers of America (PhRMA), main lobbying organization of the US pharmaceutical industry, has played a major role in the advocacy of interests of major drug companies. The main goals of Interfarma lobbying activities are: shortening the average time taken by the Brazilian regulatory agency (ANVISA) to approve marketing authorization for a new drug; making the criteria for incorporation of new drugs into SUS (Brazilian Unified Health System) more flexible and speeding up technology incorporation; changing the Country's ethical clearance system and the ethical requirements for clinical trials to meet the need of the innovative drug industry, and establishing a National Policy for Rare Diseases that allows a prompt incorporation of orphan drugs into SUS. Although lobbying affects community health and well-being, this topic is not in the public health research agenda. The impacts of pharmaceutical lobbying on health policies and health-care costs are of great importance for SUS and deserve to be investigated.

'Big data' in pharmaceutical science: challenges and opportunities.

Science.gov (United States)

Dossetter, Al G; Ecker, Gerhard; Laverty, Hugh; Overington, John

2014-05-01

Future Medicinal Chemistry invited a selection of experts to express their views on the current impact of big data in drug discovery and design, as well as speculate on future developments in the field. The topics discussed include the challenges of implementing big data technologies, maintaining the quality and privacy of data sets, and how the industry will need to adapt to welcome the big data era. Their enlightening responses provide a snapshot of the many and varied contributions being made by big data to the advancement of pharmaceutical science.

Conceptualizing Pharmaceutical Plants

DEFF Research Database (Denmark)

Larsen, Bent Dalgaard; Jensen, Klaes Ladeby; Gjøl, Mikkel

2006-01-01

In the conceptual design phase of pharmaceutical plants as much as 80%-90% of the total cost of a project is committed. It is therefore essential that the chosen concept is viable. In this design process configuration and 3D models can help validate the decisions made. Designing 3D models...... is a complex task and requires skilled users. We demonstrate that a simple 2D/3D configuration tool can support conceptualizing of pharmaceutical plants. Present paper reports on preliminary results from a full scale implementation project at a Danish engineering company....

Macro-economic factors influencing the architectural business model shift in the pharmaceutical industry.

Science.gov (United States)

Dierks, Raphaela Marie Louisa; Bruyère, Olivier; Reginster, Jean-Yves; Richy, Florent-Frederic

2016-10-01

Technological innovations, new regulations, increasing costs of drug productions and new demands are only few key drivers of a projected alternation in the pharmaceutical industry. The purpose of this review is to understand the macro economic factors responsible for the business model revolution to possess a competitive advantage over market players. Areas covered: Existing literature on macro-economic factors changing the pharmaceutical landscape has been reviewed to present a clear image of the current market environment. Expert commentary: Literature shows that pharmaceutical companies are facing an architectural alteration, however the evidence on the rationale driving the transformation is outstanding. Merger & Acquisitions (M&A) deals and collaborations are headlining the papers. Q1 2016 did show a major slowdown in M&A deals by volume since 2013 (with deal cancellations of Pfizer and Allergan, or the downfall of Valeant), but pharmaceutical analysts remain confident that this shortfall was a consequence of the equity market volatility. It seems likely that the shift to an M&A model will become apparent during the remainder of 2016, with deal announcements of Abbott Laboratories, AbbVie and Sanofi worth USD 45billion showing the appetite of big pharma companies to shift from the fully vertical integrated business model to more horizontal business models.

Pharmaceutical removal in tropical subsurface flow constructed wetlands at varying hydraulic loading rates.

Science.gov (United States)

Zhang, Dong Qing; Gersberg, Richard M; Hua, Tao; Zhu, Junfei; Tuan, Nguyen Anh; Tan, Soon Keat

2012-04-01

Determining the fate of emerging organic contaminants in an aquatic ecosystem is important for developing constructed wetlands (CWs) treatment technology. Experiments were carried out in subsurface flow CWs in Singapore to evaluate the fate and transport of eight pharmaceutical compounds. The CW system included three parallel horizontal subsurface flow CWs and three parallel unplanted beds fed continuously with synthetic wastewater at different hydraulic retention times (HRTs). The findings of the tests at 2-6 d HRTs showed that the pharmaceuticals could be categorized as (i) efficiently removed compounds with removal higher than 85% (ketoprofen and salicylic acid); (ii) moderately removed compounds with removal efficiencies between 50% and 85% (naproxen, ibuprofen and caffeine); and (iii) poorly removed compounds with efficiency rate lower than 50% (carbamazepine, diclofenac, and clofibric acid). Except for carbamazepine and salicylic acid, removal efficiencies of the selected pharmaceuticals showed significant (pcaffeine, ketoprofen and clofibric acid were found to follow first order decay kinetics with decay constants higher in the planted beds than the unplanted beds. Correlations between pharmaceutical removal efficiencies and log K(ow) were not significant (p>0.05), implying that their removal is not well related to the compound's hydrophobicity. Copyright © 2011 Elsevier Ltd. All rights reserved.

PSE in Pharmaceutical Process Development

DEFF Research Database (Denmark)

Gernaey, Krist; Cervera Padrell, Albert Emili; Woodley, John

2011-01-01

The pharmaceutical industry is under growing pressure to increase efficiency, both in production and in process development. This paper will discuss the use of Process Systems Engineering (PSE) methods in pharmaceutical process development, and searches for answers to questions such as: Which PSE...

Contribution of hospital effluents to the load of pharmaceuticals in urban wastewaters: identification of ecologically relevant pharmaceuticals.

Science.gov (United States)

Santos, Lúcia H M L M; Gros, Meritxell; Rodriguez-Mozaz, Sara; Delerue-Matos, Cristina; Pena, Angelina; Barceló, Damià; Montenegro, M Conceição B S M

2013-09-01

The impact of effluent wastewaters from four different hospitals: a university (1456 beds), a general (350 beds), a pediatric (110 beds) and a maternity hospital (96 beds), which are conveyed to the same wastewater treatment plant (WWTP), was evaluated in the receiving urban wastewaters. The occurrence of 78 pharmaceuticals belonging to several therapeutic classes was assessed in hospital effluents and WWTP wastewaters (influent and effluent) as well as the contribution of each hospital in WWTP influent in terms of pharmaceutical load. Results indicate that pharmaceuticals are widespread pollutants in both hospital and urban wastewaters. The contribution of hospitals to the input of pharmaceuticals in urban wastewaters widely varies, according to their dimension. The estimated total mass loadings were 306 g d(-1) for the university hospital, 155 g d(-1) for the general one, 14 g d(-1) for the pediatric hospital and 1.5 g d(-1) for the maternity hospital, showing that the biggest hospitals have a greater contribution to the total mass load of pharmaceuticals. Furthermore, analysis of individual contributions of each therapeutic group showed that NSAIDs, analgesics and antibiotics are among the groups with the highest inputs. Removal efficiency can go from over 90% for pharmaceuticals like acetaminophen and ibuprofen to not removal for β-blockers and salbutamol. Total mass load of pharmaceuticals into receiving surface waters was estimated between 5 and 14 g/d/1000 inhabitants. Finally, the environmental risk posed by pharmaceuticals detected in hospital and WWTP effluents was assessed by means of hazard quotients toward different trophic levels (algae, daphnids and fish). Several pharmaceuticals present in the different matrices were identified as potentially hazardous to aquatic organisms, showing that especial attention should be paid to antibiotics such as ciprofloxacin, ofloxacin, sulfamethoxazole, azithromycin and clarithromycin, since their hazard quotients

Novel methodology for pharmaceutical expenditure forecast

OpenAIRE

Vataire, Anne-Lise; Cetinsoy, Laurent; Aball?a, Samuel; R?muzat, C?cile; Urbinati, Duccio; Kornfeld, ?sa; Mzoughi, Olfa; Toumi, Mondher

2014-01-01

Background and objective: The value appreciation of new drugs across countries today features a disruption that is making the historical data that are used for forecasting pharmaceutical expenditure poorly reliable. Forecasting methods rarely addressed uncertainty. The objective of this project was to propose a methodology to perform pharmaceutical expenditure forecasting that integrates expected policy changes and uncertainty (developed for the European Commission as the ‘EU Pharmaceutical e...

Bioremediation Kinetics of Pharmaceutical Industrial Effluent

OpenAIRE

M. Šabić; M. Vuković Domanovac; Z. Findrik Blažević; E. Meštrović

2015-01-01

In recent years, concerns about the occurrence and fate of pharmaceuticals that could be present in water and wastewater has gained increasing attention. With the public’s enhanced awareness of eco-safety, environmentally benign methods based on microorganisms have become more accepted methods of removing pollutants from aquatic systems. This study investigates bioremediation of pharmaceutical wastewater from pharmaceutical company Pliva Hrvatska d.o.o., using activated sludge and bioaugmente...

Clustering as a determinant of development the competitive pharmaceutical industry - example of Nutribiomed cluster

Directory of Open Access Journals (Sweden)

Anna Skowrońska

2015-04-01

Full Text Available Continuous improvement and follow the technology seems to be particularly important in terms of health. Given the epidemiological trends is necessary to develop advanced technologies in the medical and pharmaceutical industries. Only innovative solutions offer a chance for a battle with disease, for example, with tumors which are one of the leading causes of death in Europe. This approach perfectly illustrates the strategy known as open innovation, according to which companies should learn from external sources by combining complementary ideas for its ongoing operations. The pharmaceutical industry has a significant impact on the functioning of not only the economy, but it is also closely linked to the health sector, and thus affects the level and quality of life of societies. In this context it becomes particularly important to seek solutions that will ensure the free flow of knowledge and access to highly specialized techniques, which in turn have a positive impact on the health of citizens. Analysis of the functioning of the pharmaceutical clusters is based on case study cluster Nutribiomed. The results achieved in many areas of activity confirm the legitimate use of the structure of the group of highly specialized industry, which is the drug market and indicates a number of benefits associated with the operation as part of its structure.

Pharmaceutical policies in European countries.

Science.gov (United States)

Barros, Pedro Pita

2010-01-01

Pharmaceutical expenditures have an important role in Europe. The attempts to control expenditure have used a wide range of policy measures. We reviewed the main measures adopted by the European Union countries, especially in countries where governments are the largest third-party payers. To complement a literature review on the topic, data was gathered from national reviews of health systems and direct inquiries to several government bodies. Almost all countries regulate prices of pharmaceutical products. Popular policy measures include international referencing to set prices (using as benchmark countries that have set lower prices), internal reference pricing systems to promote price competition in domestic markets, and positive lists for reimbursement to promote consumption of generics (including in some cases substitution by pharmacists of drugs prescribed by physicians). Despite the wide range of policy measures, it is not possible to identify a "silver bullet" to control pharmaceutical expenditures. We also identified two main policy challenges: policy coordination among countries within the European Union to maintain incentives for R&D at the global level, and the development of new relationships with the pharmaceutical industry; namely, the so-called risk-sharing agreements between the pharmaceutical industry and governments/regulators (or large third-party payers).

Pharmaceutical Biotechnology: A New Graduate Course at the University of Florida College of Pharmacy.

Science.gov (United States)

Schreier, Hans; And Others

1990-01-01

The University of Florida's efforts to include aspects of genetically engineered drugs into undergraduate teaching and develop a graduate program focusing on the pharmaceutical aspects of technology are outlined, including constituent contributions, attendance, and evaluation. The program's current status and plans for a lab course are discussed.…

PHARMACEUTICAL AEROSOLS FOR THE TREATMENT AND PREVENTION OF TUBERCULOSIS

Directory of Open Access Journals (Sweden)

Shumaila N Muhammad Hanif

2012-09-01

Full Text Available Historically, pharmaceutical aerosols have been employed for the treatment of obstructive airway diseases, such as asthma and chronic obstructive pulmonary disease, but in the past decades their use has been expanded to treat lung infections associated with cystic fibrosis and other respiratory diseases. Tuberculosis (TB is acquired after inhalation of aerosol droplets containing the bacilli from the cough of infected individuals. Even though TB affects other organs, the lungs are the primary site of infection, which makes the pulmonary route an ideal alternative route to administer vaccines or drug treatments. Optimization of formulations and delivery systems for anti-TB vaccines and drugs, as well as the proper selection of the animal model to evaluate those is of paramount importance if novel vaccines or drug treatments are to be successful. Pharmaceutical aerosols for patient use are generated from metered dose inhalers, nebulizers and dry powder inhalers. In addition to the advantages of providing more efficient delivery of the drug, low cost and portability, pharmaceutical dry powder aerosols are more stable than inhalable liquid dosage forms and do not require refrigeration. Methods to manufacture dry powders in respirable sizes include micronization, spray drying and other proprietary technologies. Inhalable dry powders are characterized in terms of their drug content, particle size and dispersibility to ensure deposition in the appropriate lung region and effective aerosolization from the device. These methods will be illustrated as they were applied for the manufacture and characterization of powders containing anti-tubercular agents and vaccines for pulmonary administration. The influence of formulation, selection of animal model, method of aerosol generation and administration on the efficacy demonstrated in a given study will be illustrated by the evaluation of pharmaceutical aerosols of anti-TB drugs and vaccines in guinea pigs by

[Pharmaceutical application of cyclodextrins as multi-functional drug carriers].

Science.gov (United States)

Uekama, Kaneto

2004-12-01

Owing to the increasingly globalized nature of the cyclodextrin (CyD)-related science and technology, development of the CyD-based pharmaceutical formulation is rapidly progressing. The pharmaceutically useful CyDs are classified into hydrophilic, hydrophobic, and ionic derivatives. Because of the multi-functional characteristics and bioadaptability, these CyDs are capable of alleviating the undesirable properties of drug molecules through the formation of inclusion complexes or the form of CyD/drug conjugates. This review outlines the current application of CyDs in drug delivery and pharmaceutical formulation, focusing on the following evidences. 1) The hydrophilic CyDs enhance the rate and extent of bioavailability of poorly water-soluble drugs. 2) The amorphous CyDs such as 2-hydroxypropyl-beta-CyD are useful for inhibition of polymorphic transition and crystallization rates of drugs during storage. 3) The delayed release formulation can be obtained by the use of enteric type CyDs such as O-carboxymethyl-O-ethyl-beta-CyD. 4) The hydrophobic CyDs are useful for modification of the release site and/or time profile of water-soluble drugs with prolonged therapeutic effects. 5) The branched CyDs are particularly effective in inhibiting the adsorption to hydrophobic surface of containers and aggregation of polypeptide and protein drugs. 6) The combined use of different CyDs and/or pharmaceutical additives can serve as more functional drug carriers, improving efficacy and reducing side effects. 7) The CyD/drug conjugates may provide a versatile means for the constructions of not only colonic delivery system but also site-specific drug release system, including gene delivery. On the basis of the above-mentioned knowledge, the advantages and limitations of CyDs in the design of advanced dosage forms will be discussed.

EU pharmaceutical expenditure forecast

OpenAIRE

Urbinati, Duccio; Rémuzat, Cécile; Kornfeld, Åsa; Vataire, Anne-Lise; Cetinsoy, Laurent; Aballéa, Samuel; Mzoughi, Olfa; Toumi, Mondher

2014-01-01

Background and Objectives: With constant incentives for healthcare payers to contain their pharmaceutical budgets, forecasting has become critically important. Some countries have, for instance, developed pharmaceutical horizon scanning units. The objective of this project was to build a model to assess the net effect of the entrance of new patented medicinal products versus medicinal products going off-patent, with a defined forecast horizon, on selected European Union (EU) Member States’ ph...

Nanotechnology tools in pharmaceutical R&D

OpenAIRE

Challa S.S.R. Kumar

2010-01-01

Nanotechnology is a new approach to problem solving and can be considered as a collection of tools and ideas which can be applied in pharmaceutical industry. Application of nanotechnology tools in pharmaceutical R&D is likely to result in moving the industry from ‘blockbuster drug’ model to ‘personalized medicine’. There are compelling applications in pharmaceutical industry where inexpensive nanotechnology tools can be utilized. The review explores the possibility of categorizing various nan...

Patent indicators: a window to pharmaceutical market success.

Science.gov (United States)

Guo, Yang; Hu, Yuanjia; Zheng, Mingli; Wang, Yitao

2013-07-01

Pharmaceutical success in the market is the best reward for pharmaceutical investors undergoing the lengthy, costly and risky process of pharmaceutical Research and Development (R&D). Drugs with high market revenues trigger fierce competition between pharmaceutical enterprises, as is demonstrated by the increasing Mergers & Acquisitions (M&A) cases focusing on seizing the best-selling products. On the other hand, patents, as the best shield for innovative drugs against generic drugs, become a powerful weapon for pharmaceutical enterprises to win the substantial returns generated by market exclusivity. Patents seem to be directly responsible for the commercial success of new medicines. In this context, it is of great significance to find out the empirical associations between pharmaceutical commercial success and patents. By comprehensively analysing 127 drugs marketed in the USA and their 621 American patents, this article identifies the evidence to link various patent indicators with pharmaceutical sales in actual market.

Archives: Tropical Journal of Pharmaceutical Research

African Journals Online (AJOL)

Items 1 - 50 of 97 ... Archives: Tropical Journal of Pharmaceutical Research. Journal Home > Archives: Tropical Journal of Pharmaceutical Research. Log in or Register to get access to full text downloads.

Archives: Nigerian Journal of Pharmaceutical Research

African Journals Online (AJOL)

Items 1 - 9 of 9 ... Archives: Nigerian Journal of Pharmaceutical Research. Journal Home > Archives: Nigerian Journal of Pharmaceutical Research. Log in or Register to get access to full text downloads.

Pharmaceutical care education in Kuwait: pharmacy students’ perspectives

OpenAIRE

Katoue, Maram G.; Awad, Abdelmoneim I.; Schwinghammer, Terry L.; Kombian, Samuel B.

2014-01-01

Background: Pharmaceutical care is defined as the responsible provision of medication therapy to achieve definite outcomes that improve patients’ quality of life. Pharmacy education should equip students with the knowledge, skills, and attitudes they need to practise pharmaceutical care competently. Objective: To investigate pharmacy students’ attitudes towards pharmaceutical care, perceptions of their preparedness to perform pharmaceutical care competencies, opinions about the importance...

Pharmaceutical costs of assisted reproduction in Spain.

Science.gov (United States)

Lorente, Maria-Reyes; Hernández, Juana; Antoñanzas, Fernando

2013-11-01

Assisted reproduction is one of the health services currently being considered for possible limitation or exclusion from the public health services portfolio in Spain. One of the main reasons claimed for this is the impact on the budget for pharmaceutical expenditure. The objective of this study was to assess the significance of the pharmaceutical costs of assisted reproduction in Spain. This study focused on medical practice in Spain, and is based on the opinions of experts in assisted reproduction and the results provided by professional societies' publications. The reference year is 2012 and the setting was secondary care. We have included all existing pharmaceutical modalities for assisted reproduction, as well as the most common drug for each modality. We have considered the pharmaceutical cost per cycle for artificial insemination, in vitro fertilisation with or without intracytoplasmic sperm injection (IVF_ICSI), and cryotransfer and donated fresh oocytes reception. In Spain, artificial insemination has a pharmaceutical cost per cycle of between €69.36 and €873.79. This amounts to an average cycle cost of €364.87 for partner's sperm and €327.10 for donor sperm. The pharmaceutical cost of IVF_ICSI ranges between €278.16 and €1,902.66, giving an average cost per cycle of €1,139.65. In the case of cryotransfer and donated fresh oocytes reception, the pharmaceutical cost per cycle is between €22.61 and €58.73, yielding an average cost of €40.67. The budgetary impact of pharmaceutical expenditure for assisted reproduction in Spain for the year 2012 was estimated at €98.7 million. In Spain, the total pharmaceutical cost of assisted reproduction is substantial. According to our results, we can say that about 29% of the total pharmaceutical expenditure for assisted reproduction techniques is funded by the National Health System and the rest represents 2.4% of the total annual out-of-pocket family expenditure on drugs.

Pharmaceutical policy and the pharmacy profession

DEFF Research Database (Denmark)

Traulsen, Janine Marie; Almarsdóttir, Anna Birna

2005-01-01

In this article, the authors look at the relationship between pharmaceutical policy and the pharmacy profession with focus on pharmacy practice and pharmacists in the health care sector. Pharmaceutical policy encompasses three major policy inputs: public health policy, health care policy and indu......In this article, the authors look at the relationship between pharmaceutical policy and the pharmacy profession with focus on pharmacy practice and pharmacists in the health care sector. Pharmaceutical policy encompasses three major policy inputs: public health policy, health care policy...... and industrial policy. In order to analyse and understand pharmaceutical policy, it is important to know how policymakers view pharmacy and pharmacists. The authors look at the issues that arise when policy regulates pharmacy as a business, and what this means for the profession. The perspective of pharmacy...... in managerialism, and how the division of labour with other health professionals such as physicians and pharmacy assistants is affecting the pharmacy profession's position in the labour market. Next the authors look at ways in which the pharmacy profession has affected policy. Pharmacists have been instrumental...

Public funding and private investment for R&D: a survey in China's pharmaceutical industry.

Science.gov (United States)

Qiu, Lan; Chen, Zi-Ya; Lu, Deng-Yu; Hu, Hao; Wang, Yi-Tao

2014-06-13

In recent years, China has experienced tremendous growth in its pharmaceutical industry. Both the Chinese government and private investors are motivated to invest into pharmaceutical research and development (R&D). However, studies regarding the different behaviors of public and private investment in pharmaceutical R&D are scarce. Therefore, this paper aims to investigate the current situation of public funding and private investment into Chinese pharmaceutical R&D. The primary data used in the research were obtained from the China High-tech Industry Statistics Yearbook (2002-2012) and China Statistical Yearbook of Science and Technology (2002-2012). We analyzed public funding and private investment in five aspects: total investment in the industry, funding sources of the whole industry, differences between provinces, difference in subsectors, and private equity/venture capital investment. The vast majority of R&D investment was from private sources. There is a significantly positive correlation between public funding and private investment in different provinces of China. However, public funding was likely to be invested into less developed provinces with abundant natural herbal resources. Compared with the chemical medicine subsector, traditional Chinese medicine and biopharmaceutical subsectors obtained more public funding. Further, the effect of the government was focused on private equity and venture capital investment although private fund is the mainstream of this type of investment. Public funding and private investment play different but complementary roles in pharmaceutical R&D in China. While being less than private investment, public funding shows its significance in R&D investment. With rapid growth of the industry, the pharmaceutical R&D investment in China is expected to increase steadily from both public and private sources.

Toward Higher QA: From Parametric Release of Sterile Parenteral Products to PAT for Other Pharmaceutical Dosage Forms.

Science.gov (United States)

Hock, Sia Chong; Constance, Neo Xue Rui; Wah, Chan Lai

2012-01-01

Pharmaceutical products are generally subjected to end-product batch testing as a means of quality control. Due to the inherent limitations of conventional batch testing, this is not the most ideal approach for determining the pharmaceutical quality of the finished dosage form. In the case of terminally sterilized parenteral products, the limitations of conventional batch testing have been successfully addressed with the application of parametric release (the release of a product based on control of process parameters instead of batch sterility testing at the end of the manufacturing process). Consequently, there has been an increasing interest in applying parametric release to other pharmaceutical dosage forms, beyond terminally sterilized parenteral products. For parametric release to be possible, manufacturers must be capable of designing quality into the product, monitoring the manufacturing processes, and controlling the quality of intermediates and finished products in real-time. Process analytical technology (PAT) has been thought to be capable of contributing to these prerequisites. It is believed that the appropriate use of PAT tools can eventually lead to the possibility of real-time release of other pharmaceutical dosage forms, by-passing the need for end-product batch testing. Hence, this literature review attempts to present the basic principles of PAT, introduce the various PAT tools that are currently available, present their recent applications to pharmaceutical processing, and explain the potential benefits that PAT can bring to conventional ways of processing and quality assurance of pharmaceutical products. Last but not least, current regulations governing the use of PAT and the manufacturing challenges associated with PAT implementation are also discussed. Pharmaceutical products are generally subjected to end-product batch testing as a means of quality control. Due to the inherent limitations of conventional batch testing, this is not the most

Pharmaceuticals: pharmaceutical cost controls--2005. End of Year Issue Brief.

Science.gov (United States)

Seay, Melicia; Varma, Priya

2005-12-31

The enactment of the Omnibus Budget Reconciliation Act of 1990 (OBRA '90) gave states the option of offering pharmaceutical benefits within their Medicaid programs. But the law placed restrictions on states' flexibility to control what prescriptions they would cover and required the states to reimburse outpatient prescription drugs from manufacturers that signed rebate agreements with the U.S. Department of Health and Human Services. Forty-nine states--Arizona is excluded, based on its program structure--and the District of Columbia currently offer prescription drug coverage under the Medicaid Drug Rebate Program. During the past four years, states all over the country have been plagued with revenue shortfalls in their state Medicaid budgets. While the fiscal situation improved for most states in the 2004 legislative session, many states still face budget pressures in 2005. Compounding existing budget pressures are threats from the Bush Administration to shift increased costs of the Medicaid program on to the states. All things considered, the economic pressure of funding Medicaid is at the top of legislative agendas in 2005. As in previous years, states are attempting to reduce costs to their Medicaid programs by seeking savings in their pharmaceutical programs. Prescription drug costs are highly attributed as a contributing factor to the fiscal climate of state Medicaid programs. Currently, prescription drug spending outpaces that of every other category of health care and drug prices are rising faster than inflation. In response, states are instituting a variety of pharmaceutical cost control measures such as creating preferred drug lists (PDLs), negotiating supplemental rebates, forming bulk purchasing pools, promoting generic drug substitution and implementing price controls. As prescription drug cost containment tools have gained acceptance and momentum, they continue to be controversial. This issue brief explores the debate, history, methodology, utilization

Pharmaceutical care education in Kuwait: pharmacy students' perspectives.

Science.gov (United States)

Katoue, Maram G; Awad, Abdelmoneim I; Schwinghammer, Terry L; Kombian, Samuel B

2014-07-01

Pharmaceutical care is defined as the responsible provision of medication therapy to achieve definite outcomes that improve patients' quality of life. Pharmacy education should equip students with the knowledge, skills, and attitudes they need to practise pharmaceutical care competently. To investigate pharmacy students' attitudes towards pharmaceutical care, perceptions of their preparedness to perform pharmaceutical care competencies, opinions about the importance of the various pharmaceutical care activities, and the barriers to its implementation in Kuwait. A descriptive, cross-sectional survey of pharmacy students (n=126) was conducted at Faculty of Pharmacy, Kuwait University. Data were collected via a pre-tested self-administered questionnaire. Descriptive statistics including percentages, medians and means Likert scale rating (SD) were calculated and compared using SPSS, version 19. Statistical significance was accepted at a p value of 0.05 or lower. The response rate was 99.2%. Pharmacy students expressed overall positive attitudes towards pharmaceutical care. They felt prepared to implement the various aspects of pharmaceutical care, with the least preparedness in the administrative/management aspects. Perceived pharmaceutical care competencies grew as students progressed through the curriculum. The students also appreciated the importance of the various pharmaceutical care competencies. They agreed/strongly agreed that the major barriers to the integration of pharmaceutical care into practice were lack of private counseling areas or inappropriate pharmacy layout (95.2%), lack of pharmacist time (83.3%), organizational obstacles (82.6%), and pharmacists' physical separation from patient care areas (82.6%). Pharmacy students' attitudes and perceived preparedness can serve as needs assessment tools to guide curricular change and improvement. Student pharmacists at Kuwait University understand and advocate implementation of pharmaceutical care while also

Pharmaceutical Cocrystals: Regulatory and Strategic Aspects, Design and Development

OpenAIRE

Gadade, Dipak Dilip; Pekamwar, Sanjay Sudhakar

2016-01-01

Cocrystal is a concept of the supramolecular chemistry which is gaining the extensive interest of researchers from pharmaceutical and chemical sciences and of drug regulatory agencies. The prominent reason of which is its ability to modify physicochemical properties of active pharmaceutical ingredients. During the development of the pharmaceutical product, formulators have to optimize the physicochemical properties of active pharmaceutical ingredients. Pharmaceutical cocrystals can be employe...

Biocatalytic Synthesis of Chiral Pharmaceutical Intermediates

Directory of Open Access Journals (Sweden)

Ramesh N. Patel

2004-01-01

Full Text Available The production of single enantiomers of drug intermediates has become increasingly important in the pharmaceutical industry. Chiral intermediates and fine chemicals are in high demand from both the pharmaceutical and agrochemical industries for the preparation of bulk drug substances and agricultural products. The enormous potential of microorganisms and enzymes for the transformation of synthetic chemicals with high chemo-, regio- and enantioselectivities has been demonstrated. In this article, biocatalytic processes are described for the synthesis of chiral pharmaceutical intermediates.

Pharmaceutical load in sewage sludge and biochar produced by hydrothermal carbonization.

Science.gov (United States)

vom Eyser, C; Palmu, K; Schmidt, T C; Tuerk, J

2015-12-15

We investigated the removal of twelve pharmaceuticals in sewage sludge by hydrothermal carbonization (HTC), which has emerged as a technology for improving the quality of organic waste materials producing a valuable biochar material. In this study, the HTC converted sewage sludge samples to a biochar product within 4h at a temperature of 210 °C and a resulting pressure of about 15 bar. Initial pharmaceutical load of the sewage sludge was investigated as well as the residual concentrations in biochar produced from spiked and eight native sewage sludge samples from three waste water treatment plants. Additionally, the solid contents of source material and product were compared, which showed a considerable increase of the solid content after filtration by HTC. All pharmaceuticals except sulfamethoxazole, which remained below the limit of quantification, frequently occurred in the investigated sewage sludges in the μg/kg dry matter (DM) range. Diclofenac, carbamazepine, metoprolol and propranolol were detected in all sludge samples with a maximum concentration of 800 μg/kgDM for metoprolol. HTC was investigated regarding its contaminant removal efficiency using spiked sewage sludge. Pharmaceutical concentrations were reduced for seven compounds by 39% (metoprolol) to≥97% (carbamazepine). In native biochar samples the four compounds phenazone, carbamazepine, metoprolol and propranolol were detected, which confirmed that the HTC process can reduce the load of micropollutants. In contrast to the other investigated compounds phenazone concentration increased, which was further addressed in thermal behaviour studies including three structurally similar potential precursors. Copyright © 2015 Elsevier B.V. All rights reserved.

Pharmaceutical Cocrystals: Regulatory and Strategic Aspects, Design and Development

Directory of Open Access Journals (Sweden)

Dipak Dilip Gadade

2016-12-01

Full Text Available Cocrystal is a concept of the supramolecular chemistry which is gaining the extensive interest of researchers from pharmaceutical and chemical sciences and of drug regulatory agencies. The prominent reason of which is its ability to modify physicochemical properties of active pharmaceutical ingredients. During the development of the pharmaceutical product, formulators have to optimize the physicochemical properties of active pharmaceutical ingredients. Pharmaceutical cocrystals can be employed to improve vital physicochemical characteristics of a drug, including solubility, dissolution, bioavailability and stability of pharmaceutical compounds while maintaining its therapeutic activity. It is advantageous being a green synthesis approach for production of pharmaceutical compounds. The formation polymorphic forms, solvates, hydrates and salts of cocrystals during the synthesis reported in the literature which can be a potential issue in the development of pharmaceutical cocrystals. The approaches like hydrogen bonding rules, solubility parameters, screening through the CSD database or thermodynamic characteristics can be utilized for the rational design of cocrystals and selection of coformers for synthesis multi-component cocrystals. Considering the significance of pharmaceutical cocrystals pharmaceutical regulatory authorities in the United States and Europe issued guidance documents which may be helpful for pharmaceutical product registration in these regions. In this article, we deal with the design, synthesis, strategic aspects and characteristics of cocrystals along perspectives on its regulatory and intellectual property considerations.

Pharmaceutical Cocrystals: Regulatory and Strategic Aspects, Design and Development.

Science.gov (United States)

Gadade, Dipak Dilip; Pekamwar, Sanjay Sudhakar

2016-12-01

Cocrystal is a concept of the supramolecular chemistry which is gaining the extensive interest of researchers from pharmaceutical and chemical sciences and of drug regulatory agencies. The prominent reason of which is its ability to modify physicochemical properties of active pharmaceutical ingredients. During the development of the pharmaceutical product, formulators have to optimize the physicochemical properties of active pharmaceutical ingredients. Pharmaceutical cocrystals can be employed to improve vital physicochemical characteristics of a drug, including solubility, dissolution, bioavailability and stability of pharmaceutical compounds while maintaining its therapeutic activity. It is advantageous being a green synthesis approach for production of pharmaceutical compounds. The formation polymorphic forms, solvates, hydrates and salts of cocrystals during the synthesis reported in the literature which can be a potential issue in the development of pharmaceutical cocrystals. The approaches like hydrogen bonding rules, solubility parameters, screening through the CSD database or thermodynamic characteristics can be utilized for the rational design of cocrystals and selection of coformers for synthesis multi-component cocrystals. Considering the significance of pharmaceutical cocrystals pharmaceutical regulatory authorities in the United States and Europe issued guidance documents which may be helpful for pharmaceutical product registration in these regions. In this article, we deal with the design, synthesis, strategic aspects and characteristics of cocrystals along perspectives on its regulatory and intellectual property considerations.

Online Pharmaceutical Care Provision: Full-Implementation of an eHealth Service Using Design Science Research.

Science.gov (United States)

Gregório, João; Pizarro, Ângela; Cavaco, Afonso; Wipfli, Rolf; Lovis, Christian; Mira da Silva, Miguel; Lapão, Luís Velez

2015-01-01

Chronic diseases are pressing health systems to introduce reforms, focused on primary care and multidisciplinary models. Community pharmacists have developed a new role, addressing pharmaceutical care and services. Information systems and technologies (IST) will have an important role in shaping future healthcare provision. However, the best way to design and implement an IST for pharmaceutical service provision is still an open research question. In this paper, we present a possible strategy based on the use of Design Science Research Methodology (DSRM). The application of the DSRM six stages is described, from the definition and characterization of the problem to the evaluation of the artefact.

Analysis the Efficiency and Productivity of Indonesian Pharmaceutical Public Companies Using Data Envelopment Analysis

Directory of Open Access Journals (Sweden)

Dewi Hanggraeni

2014-08-01

Full Text Available As one of the biggest medicines market in the South East Asia, the pharmaceutical industry inIndonesia has a huge potential market. However, the majority supply of raw materials has been imported.Besides, regulations of the Health Ministry and the Trade Ministry have still hampered mostplayers in Indonesia pharmaceutical industry. Therefore, this study used Data Envelopment Analysis(DEA models to analyze efficiency and productivity change in the Indonesian pharmaceutical industrybetween 2006 and 2011, listed in the Indonesia Stock Exchange and also supported by applyingefficiency financial ratio. This study finds that the decision for the most relatively efficient companyis different using DEA compared to efficiency financial ratios, yet DEA has better measurement ofefficiency. It is proven by one of State-owned Enterprises has been evaluated underperformed by thefinancial ratio analysis, unexpectedly is efficient using the DEA approach. This study has also proposedand tested a hypothesis on the average efficiency to check if the domestic and foreign pharmaceuticalcompanies differ in their efficiency but the result implies that there is no significant statisticaldifference among them. This study indicates that firms having dominant contribution in selling overthe-counter medicines are more efficient than selling ethical medicines. Lastly, technological changecontribution has more influence to productivity change instead of pure technical efficiency change inIndonesia pharmaceutical companies.

Organic Colouring Agents in the Pharmaceutical Industry

Directory of Open Access Journals (Sweden)

Šuleková M.

2017-09-01

Full Text Available Food dyes are largely used in the process of manufacturing pharmaceutical products. The aim of such a procedure is not only to increase the attractiveness of products, but also to help patients distinguish between pharmaceuticals. Various dyes, especially organic colouring agents, may in some cases have a negative impact on the human body. They are incorporated into pharmaceutical products including tablets, hard gelatine capsules or soft gelatine capsules, lozenges, syrups, etc. This article provides an overview of the most widely used colouring agents in pharmaceuticals, their characteristics and the EU legislation which regulates their use.

Occurrence of pharmaceuticals in Taiwan's surface waters: impact of waste streams from hospitals and pharmaceutical production facilities.

Science.gov (United States)

Lin, Angela Yu-Chen; Tsai, Yu-Ting

2009-06-01

We investigated the occurrence and distribution of pharmaceuticals (including antibiotics, estrogens, non-steroidal anti-inflammatory drugs (NSAIDs), beta-blockers, and lipid regulators) in three rivers and in the waste streams of six hospitals and four pharmaceutical production facilities in Taiwan. The most frequently detected pharmaceuticals were acetaminophen, erythromycin-H(2)O, sulfamethoxazole, and gemfibrozil. NSAIDs were the next most-often detected compounds, with a detection frequency >60%. The other analytes were not detected or were seen in only a few samples at trace concentrations. The present study demonstrates a significant discharge of human medications from hospital and drug production facilities into surface waters in the Taipei district. The high concentrations of pharmaceuticals found in the Sindian and Dahan rivers demonstrate the alarming degree to which they have been impacted by urban drainage (waste effluents from hospitals, households, and pharmaceutical production facilities). The ubiquitous occurrence at extremely high concentrations of acetaminophen and erythromycin-H(2)O in both rivers (up to 15.7 and 75.5 microg/L) and in wastewater from hospitals and pharmaceutical production facilities (up to 417.5 and 7.84 microg/L) was unique. This finding, in combination with acetaminophen's status as the drug most often prescribed by Taiwan's dominant clinical institute, suggests the potential use of acetaminophen as a molecular indicator of contamination of Taiwan's aqueous environments with untreated urban drainage.

Self-organizing Map Analysis for Understanding Comprehensive Relationships between Formulation Variables, State of Water, and the Physical Stability of Pharmaceutical Emulsions

OpenAIRE

Onuki, Yoshinori; Hasegawa, Naoki; Horita, Akihiro; Ueno, Naomi; Kida, Chihiro; Hayashi, Yoshihiro; Obata, Yasuko; Toshokan, Toshokan

2015-01-01

The physical stability of pharmaceutical emulsions is an important quality attribute to be considered. To obtain a better understanding of this issue, this study investigated the contribution of the state of water to the physical stability of pharmaceutical emulsions. The key technology to evaluate the state of water was magnetic resonance imaging (MRI). For sample preparation, model emulsions with different formulation variables (surfactant content, water content, and hydrophilic–lipophilic ...

The pharmaceutics used in medicine, using fields and discarding of wastes

International Nuclear Information System (INIS)

Oezyurt, M.

2009-01-01

Radioisotopes are being used in medicine, industry, environmental pollution, agriculture, hydrology etc. The medical diagnosis by radiation is the main source of synthetic radiation exposure source of public. Radioisotopes are used in different topics both for diagnosis and therapy. Naturally as a result of the usage of these radioactive elements, radioactive wastes are formed and discarding rules of these wastes must be applied very carefully. Solid or liquid all the radioactive medical wastes are subject to utmost care of disposing process under control of the health physics authorities. Pharmaceutics used in humans are consumed at high amounts in the world. Pharmaceutical compounds discharged into surface waters threaten the water life and reenter the water cycle. At a thesis work, it was showed that the medical drugs were absorbed by the active sludge in specific ratios. Therefore, the waters and treated sludges discharged from wastewater treatment plants must never be used for agricultural purposes without the necessary analysis. The receptor media where wastewaters are discharged , also at the places where advanced treatment technologies are not used, presence of medical drug residues cause potential risk for the livings and human health. At this work, the characteristics of radio pharmaceutics, the using places and also discarding ways are told.

The Development of a Parenteral Pharmaceutical Formulation of a New Class of Compounds of Nitrosourea.

Science.gov (United States)

Nikolaeva, Ludmila; Oborotova, Natalia; Bunyatyan, Natalia; Zhang, Xi; Sanarova, Ekaterina; Lantsova, Anna; Orlova, Olga; Polozkova, Alevtina

2016-11-01

Despite the rapid development of medical technologies, chemotherapy treatment still occupies an important place in clinical oncology. In this regard, the current research in this area focuses on the synthesis of new highly effective antitumor substances that have minimal side effects and the development of stable pharmaceutical formulations (PF) on their basis. In order to solve this problem, the I. Ya. Postovsky Institute of Organic Synthesis of the Ural Branch of the Russian Academy of Sciences actively sought for original substances, namely, nitrosourea (NU) derivatives, one of the most promising classes of anticancer drugs. As a result of this research, a novel NU derivative was synthesized, namely ormustine, which showed high antitumor activity in preliminary preclinical trials. It is now crucial to develop an ormustine pharmaceutical formulation. Conducted technological studies showed that the most suitable solvent for the drug substance is 0.1 M hydrochloric acid, which ensures its rapid dissolution by ultrasonic treatment. A significant reduction in the concentration of the active ingredient during the storage of the solution required the development of a technique of its lyophilization and the selection of a shaper such as a Kollidon 17 PF. Upon completion of the development of a pharmaceutical formulation of ormustine, its stability after lyophilization was demonstrated, and a sufficient amount of the drug has been acquired for preclinical research.

Management of health technologies: An international view

NARCIS (Netherlands)

Jonsson, E.; Banta, D.

1999-01-01

Health technology includes not only equipment, pharmaceuticals, and medical devices but also surgical and medical procedures Most countries regulate drugs and devices by law, by payment, or by placement of services-a new, multidisciplinary research called health technology assessment assists policy

Occurrence and removal of pharmaceutically active compounds in sewage treatment plants with different technologies

Science.gov (United States)

Ying, Guang-Guo; Kookana, Rai S.; Kolpin, Dana W.

2009-01-01

Occurrence of eight selected pharmaceutically active compounds (PhACs; caffeine, carbamazepine, triclosan, gemfibrozil, diclofenac, ibuprofen, ketoprofen and naproxen) were investigated in effluents from fifteen sewage treatment plants (STPs) across South Australia. In addition, a detailed investigation into the removal of these compounds was also carried out in four STPs with different technologies (Plant A: conventional activated sludge; plant B: two oxidation ditches; plant C: three bioreactors; and plant D: ten lagoons in series). The concentrations of these compounds in the effluents from the fifteen STPs showed substantial variations among the STPs, with their median concentrations ranging from 26 ng/L for caffeine to 710 ng/L for carbamazepine. Risk assessment based on the "worst case scenario" of the monitoring data from the present study suggested potential toxic risks to aquatic organisms posed by carbamazepine, triclosan and diclofenac associated with such effluent discharge. With the exception of carbamazepine and gemfibrozil, significant concentration decreases between influent and effluent were observed in the four STPs studied in more detail. Biodegradation was found to be the main mechanism for removing concentrations from the liquid waste stream for the PhACs within the four STPs, while adsorption onto sludge appeared to be a minor process for all target PhACs except for triclosan. Some compounds (e.g. gemfibrozil) exhibited variable removal efficiencies within the four STPs. Plant D (10 lagoons in series) was least efficient in the removal of the target PhACs; significant biodegradation of these compounds only occurred from the sixth or seventh lagoon.

Risk Management in the Pharmaceutical Industry in Slovenian Companies

Directory of Open Access Journals (Sweden)

Bucalo Nina

2017-05-01

Full Text Available The pharmaceutical industry is one of the most competitive businesses in the world. Supply chain in this industry has been directed towards the production of large batches to avoid lack of supplies, and the achievement of regulatory requirements, at the cost of high level of inventory, higher costs and inventory write-off due to expiration or other reasons. In recent years this industry is facing major changes and challenges such as intense globalization processes, increased competition and innovations in technologies, which has broadened and deepened risks in supply chain.

Biodegradation of pharmaceuticals in hospital wastewater by a hybrid biofilm and activated sludge system (Hybas)

DEFF Research Database (Denmark)

Escola Casas, Monica; Chhetri, Ravi Kumar; Ooi, Gordon Tze Hoong

2015-01-01

TM is a hybrid process, based on the integrated fixed-film activated sludge technology, where plastic carriers for biofilm growth are suspended within activated sludge. To investigate the potential of a hybrid system for the removal of pharmaceuticals in hospital wastewater a pilot plant consisting of a series...

Iran’s Pharmaceutical Sectoral Innovation System

Directory of Open Access Journals (Sweden)

Bahman Kargar Shahamat

2017-12-01

Full Text Available Abstract By reviewing economic performance, two main phenomena could be identified: The first phenomenon is prior to the third wave of the Industrial Revolution in which limited resources are the predominant input; in other words, physical and natural resources are much more credited than human resources. The second phenomenon resonates with the third wave of industrial revolution to the present time, suggesting the pivotal role of humans in production and accumulation of wealth, in which limited resources are no longer considered as predominant input. The present research seeks to understand the behavioral logic of the players of Iran's pharmaceutical sector so as to infer the innovative treatment of the firms in this sector. The concept of innovative system is indebted to the efforts economists and other scientists have made by analyzing economic development based upon technological development. Meanwhile, sectoral innovation system (SIS is a tool for analyzing a technological sector in the context of evolutionary economics with an emphasis on institutional capabilities. The structure of such an approach is composed of some components through which performance analysis of certain technological sector could be made possible. In research, we use expert panel with 12 experts from Universities, Companies, Governmental institutes. The current study wishes to explain structural model of institutional elements in this technological sector. Subsequently, in light of such an explanation, structural elements of this sector would be analyzed through identification of legal and regulatory framework, innovative culture, innovative infrastructure, financial resources, information resources, technology transfer mechanisms, commercialization support and marketing.

Emerging Raman Applications and Techniques in Biomedical and Pharmaceutical Fields

CERN Document Server

Morris, Michael D

2010-01-01

The book presents the latest technological advances in Raman spectroscopy that are presently redrawing the landscape of many fields of biomedical and pharmaceutical R&D. Numerous examples are given to illustrate the application of the new methods and compared with established and related techniques. The book is suitable for both new researchers and practitioners in this area as well as for those familiar with the Raman technique but seeking to keep abreast of the latest dramatic advances in this field.

FORMATION AND FURTHER DEVELOPMENT OF MODERN PROMOTION OF PHARMACEUTICAL PRODUCTS

Directory of Open Access Journals (Sweden)

Юрий Владимирович Тарасов

2014-02-01

Full Text Available The articles addresses key notions and elements of marketing of pharmaceutical companies. Key stages and particularities of formation of pharmaceutical marketing are considered. It is proved that in general pharmaceutical market is developing under general marketing rules, however while developing strategy of promotion of pharmaceutical products specific features of the industry must be taken into consideration. The authors describes specific features of modern pharmaceutical market, which must be considered while developing policy of promotion of pharmaceutical products.The analysis is made of modern state of Russian pharmaceutical industry, its place in world pharmaceutical market. It is found that development of pharmaceutical market is directly influenced by the reform of pharmaceutical industry initiated by the Government of our country in 2008. Characteristic of current stage of market development is more strict conditions in marketing sphere and promotion of drugs. DOI: http://dx.doi.org/10.12731/2218-7405-2013-12-2

Metagenomic analysis of an ecological wastewater treatment plant?s microbial communities and their potential to metabolize pharmaceuticals

OpenAIRE

Balcom, Ian N.; Driscoll, Heather; Vincent, James; Leduc, Meagan

2016-01-01

Pharmaceuticals and other micropollutants have been detected in drinking water, groundwater, surface water, and soil around the world. Even in locations where wastewater treatment is required, they can be found in drinking water wells, municipal water supplies, and agricultural soils. It is clear conventional wastewater treatment technologies are not meeting the challenge of the mounting pressures on global freshwater supplies. Cost-effective ecological wastewater treatment technologies have ...

Pharmaceutical care education in Kuwait: pharmacy students’ perspectives

Directory of Open Access Journals (Sweden)

Katoue MG

2014-09-01

Full Text Available Background: Pharmaceutical care is defined as the responsible provision of medication therapy to achieve definite outcomes that improve patients’ quality of life. Pharmacy education should equip students with the knowledge, skills, and attitudes they need to practise pharmaceutical care competently. Objective: To investigate pharmacy students’ attitudes towards pharmaceutical care, perceptions of their preparedness to perform pharmaceutical care competencies, opinions about the importance of the various pharmaceutical care activities, and the barriers to its implementation in Kuwait. Methods: A descriptive, cross-sectional survey of pharmacy students (n=126 was conducted at Faculty of Pharmacy, Kuwait University. Data were collected via a pre-tested self-administered questionnaire. Descriptive statistics including percentages, medians and means Likert scale rating (SD were calculated and compared using SPSS, version 19. Statistical significance was accepted at a p value of 0.05 or lower. Results: The response rate was 99.2%. Pharmacy students expressed overall positive attitudes towards pharmaceutical care. They felt prepared to implement the various aspects of pharmaceutical care, with the least preparedness in the administrative/management aspects. Perceived pharmaceutical care competencies grew as students progressed through the curriculum. The students also appreciated the importance of the various pharmaceutical care competencies. They agreed/strongly agreed that the major barriers to the integration of pharmaceutical care into practice were lack of private counseling areas or inappropriate pharmacy layout (95.2%, lack of pharmacist time (83.3%, organizational obstacles (82.6%, and pharmacists’ physical separation from patient care areas (82.6%. Conclusion: Pharmacy students’ attitudes and perceived preparedness can serve as needs assessment tools to guide curricular change and improvement. Student pharmacists at Kuwait University

Supply Chain Management in Zhendong Pharmaceutical Company

OpenAIRE

Li, Yan

2011-01-01

Medicines are special commodity related to people’s lives and health, therefore, pharmaceutical distribution is an industry affecting the national economy and the people's livelihood. With health care reform, changeable pharmaceutical policy and fiercely increasing competition in the medical industry, pharmaceutical distribution companies should improve their level of logistics operations and reduce overall logistics management costs in order to gain a leading position in the competition. In ...

The evolution of hot-stage microscopy to aid solid-state characterizations of pharmaceutical solids

International Nuclear Information System (INIS)

Vitez, I.M.; Davidovich, M.; Newman, A.W.; Kiesnowski, C.

1998-01-01

A variety of techniques can be used to characterize the physical properties of pharmaceutical solids, including thermal analysis, hot-stage microscopy, X-ray powder diffraction, spectroscopic and micromeritic analysis. Comprehensive characterizations of the physical properties of pharmaceutical solids require a multi-disciplinary approach, since no single technique is capable of characterizing the materials completely.The combination of traditional hot-stage microscopy with new technologies such as high-resolution micrography, image capture, storage manipulation, and presentation, have permitted more comprehensive physical property characterizations to be conducted. As a result of these technological advances, it is possible to present the results of these microscopic analyses, as they were initially collected by the microscopist, outside of the laboratory.An evolutionary trail detailing the use of hot-stage microscopy in the Materials Science Group, from a simple melting point apparatus to the current hot-stage DSC microscopy instrument, will be presented. Examples of materials characterized using the hot-stage microscopy system will also be presented. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)

[Fourcroy and pharmaceutical journals].

Science.gov (United States)

Bonnemain, Bruno

2011-04-01

Cadet de Gassicourt wrote a brief Eloge of Fourcroy in January 1810 as he died in December of 1809. Fourcroy had a major role concerning the new ideas on the place of pharmacy at the beginning of the 19th century. Fourcroy has had a key influence for the start of several pharmaceutical journals that wanted to emphasize the link between the new chemistry and pharmacy. None of these journals created with him will survive and one has to wait for 1909 to see the creation, without Fourcroy, of a new pharmaceutical journal, the "Journal de Pharmacie" that will become "Journal de Pharmacie et des Sciences accessoires", then "Journal de Pharmacie et de Chimie", before taking the name of"Annales Pharmaceutiques Françaises", the present official journal of the French Academy of Pharmacy. In spite of the essential role of Fourcroy at the start of pharmaceutical journals, Cadet did not even mention it in his Eloge of 1810.

NMR imaging and pharmaceutical sciences

International Nuclear Information System (INIS)

Beall, P.T.; Good, W.R.

1986-01-01

Described is the technique of NMR-imaging in diagnostic medicine. Proton and phosphorus NMR in diagnosis of abnormal tissue pathology. Discussed is the value of NMR to the pharmaceutical sciences. NMR may play an important role in monitoring the response of tissues to drugs, determining the localization of drugs, performing real time pharmacokinetics and testing the use of NMR contrast pharmaceuticals

Bioremediation Kinetics of Pharmaceutical Industrial Effluent

Directory of Open Access Journals (Sweden)

M. Šabić

2015-05-01

Full Text Available In recent years, concerns about the occurrence and fate of pharmaceuticals that could be present in water and wastewater has gained increasing attention. With the public’s enhanced awareness of eco-safety, environmentally benign methods based on microorganisms have become more accepted methods of removing pollutants from aquatic systems. This study investigates bioremediation of pharmaceutical wastewater from pharmaceutical company Pliva Hrvatska d.o.o., using activated sludge and bioaugmented activated sludge with isolated mixed bacterial culture. The experiments were conducted in a batch reactor in submerged conditions, at initial concentration of organic matter in pharmaceutical wastewater, expressed as COD, 5.01 g dm–3 and different initial concentrations of activated sludge, which ranged from 1.16 to 3.54 g dm–3. During the experiments, the COD, pH, concentrations of dissolved oxygen and biomass were monitored. Microscopic analyses were performed to monitor the quality of activated sludge. Before starting with the bioremediation in the batch reactor, toxicity of the pharmaceutical wastewater was determined by toxicity test using bacteria Vibrio fischeri. The obtained results showed that the effective concentration of the pharmaceutical wastewater was EC50 = 17 % and toxicity impact index was TII50 = 5.9, meaning that the untreated pharmaceutical industrial effluent must not be discharged into the environment before treatment. The results of the pharmaceutical wastewater bioremediation process in the batch reactor are presented in Table 1. The ratio γXv ⁄ γX maintained high values throughout all experiments and ranged from 0.90 and 0.95, suggesting that the concentrations of biomass remained unchanged during the experiments. The important kinetic parameters required for performance of the biological removal process, namely μmax, Ks, Ki, Y and kd were calculated from batch experiments (Table 2. Figs. 1 and 2 show the experimental

Strategic of Applying Free Chemical Usage In Purified Water System For Pharmaceutical Industry Toward CPOB (Cara Pembuatan Obat yang Baik Indonesia To Reducing Environmental Pollution

Directory of Open Access Journals (Sweden)

Kartono R.

2014-03-01

Full Text Available The purpose of this paper is to examine the sets of model and literature review to prove that strategy of applying free chemical usage in purified water system for pharmaceutical industry would be help the existing and new pharmaceutical companies to comply with part of Natioanal Agency of Drug and Food Control / Badan Pengawas Obat dan Makanan (NADFC/BPOM regulation in order to achieve “Cara Pembuatan Obat yang Baik” (CPOB of Indonesia pharmaceutical industry. One of the main reasons is when we figured out the number of Indonesian pharmaceutical industries in 2012 are kept reducing compare to the increasing numbers of Indonesian population growth. This strategy concept also might help the industries to reducing environmental pollution, and operational cost in pharmaceutical industries, by reducing of the chemical usage for water treatment process in floculation and cougulation and chlorination for sterillization. This new model is free usage of chemicals for purified water generation system process and sterilization. The concept offering of using membrane technology- Reverse Osmosis (RO membrane base treatment to replace traditional chemical base treatment, following enhance Electrodeionization (EDI as final polisher for controlling conductivity, and finally Ultra Violet (UV disinfectant technology as final guard for bacteria controls instead of chemical base system in purified water generation system.

Strategic of Applying Free Chemical Usage In Purified Water System For Pharmaceutical Industry Toward CPOB (Cara Pembuatan Obat yang Baik) Indonesia To Reducing Environmental Pollution

Science.gov (United States)

Kartono, R.; Basuki, Y. T.

2014-03-01

The purpose of this paper is to examine the sets of model and literature review to prove that strategy of applying free chemical usage in purified water system for pharmaceutical industry would be help the existing and new pharmaceutical companies to comply with part of Natioanal Agency of Drug and Food Control / Badan Pengawas Obat dan Makanan (NADFC/BPOM) regulation in order to achieve "Cara Pembuatan Obat yang Baik" (CPOB) of Indonesia pharmaceutical industry. One of the main reasons is when we figured out the number of Indonesian pharmaceutical industries in 2012 are kept reducing compare to the increasing numbers of Indonesian population growth. This strategy concept also might help the industries to reducing environmental pollution, and operational cost in pharmaceutical industries, by reducing of the chemical usage for water treatment process in floculation and cougulation and chlorination for sterillization. This new model is free usage of chemicals for purified water generation system process and sterilization. The concept offering of using membrane technology- Reverse Osmosis (RO) membrane base treatment to replace traditional chemical base treatment, following enhance Electrodeionization (EDI) as final polisher for controlling conductivity, and finally Ultra Violet (UV) disinfectant technology as final guard for bacteria controls instead of chemical base system in purified water generation system.

Assessment of Nelumbo nucifera and Hydrilla verticillata in the treatment of pharmaceutical industry effluent from 24 Parganas, West Bengal

Directory of Open Access Journals (Sweden)

Shamba Chatterjee

2014-10-01

Full Text Available Modern day technologies employed in industrialization and unhygienic lifestyle of mankind has led to a severe environmental menace resulting in pollution of freshwater bodies. Pharmaceutical industry effluents cause eutrophication and provide adequate nutrients for growth of pathogenic bacteria. This study has been conducted with aquatic plants water lotus (Nelumbo nucifera and hydrilla (Hydrilla verticillata with an novel aim to treat pharmaceutical industry effluents showing the outcome of the experiments carried out with the effluents collected from rural areas of 24 Parganas, West Bengal, India. Determination of pH, solid suspend, BOD5, NH3-N, MPN and coliform test were used for this notioned purpose. Pharmaceutical waste effluent water treated with water lotus showed less pH, solid suspend, DO, BOD, NH3-N, MPN and coliform bacteria than hydrilla treatment when compared to the control. In conclusion, water lotus is found to be more efficient in treatment of pharmaceutical industry effluent waste water than hydrilla.

Radiation decontamination of pharmaceutical raw materials as an integral part of the good pharmaceutical manufacturing practice (GPMP)

Energy Technology Data Exchange (ETDEWEB)

Razem, D; Katusin-Razem, B [Institut Rudjer Boskovic, Zagreb (Yugoslavia); Starcevic, M; Galekovic, B [PLIVA Pharmaceutical Works, Zagreb (Yugoslavia)

1990-01-01

The microbiological quality of many raw materials used in the manufacture of pharmaceuticals and adjuvants often fails to meet the standards set by the pharmaceutical industry. Raw materials of biological provenience are particularly susceptible to contamination. This work describes the present situation regarding the microbial load of corn starch. Given the accepted microbiological criteria, irradiation treatment is proposed as integral to Good Pharmaceutical Manufacturing Practice (GPMP). The use of total viable count as a guide for specifying microbial limits for non-sterile materials is supported. Criteria for the choice of dose are discussed. (author).

Radiation decontamination of pharmaceutical raw materials as an integral part of the good pharmaceutical manufacturing practice (GPMP)

International Nuclear Information System (INIS)

Razem, D.; Katusin-Razem, B.; Starcevic, M.; Galekovic, B.

1990-01-01

The microbiological quality of many raw materials used in the manufacture of pharmaceuticals and adjuvants often fails to meet the standards set by the pharmaceutical industry. Raw materials of biological provenience are particularly susceptible to contamination. This work describes the present situation regarding the microbial load of corn starch. Given the accepted microbiological criteria, irradiation treatment is proposed as integral to Good Pharmaceutical Manufacturing Practice (GPMP). The use of total viable count as a guide for specifying microbial limits for non-sterile materials is supported. Criteria for the choice of dose are discussed. (author)

Nurse practitioners' perceptions and participation in pharmaceutical marketing.

Science.gov (United States)

Crigger, Nancy; Barnes, Kristen; Junko, Autumn; Rahal, Sarah; Sheek, Casey

2009-03-01

This paper reports on a study conducted to describe family nurse practitioners' perceptions towards and participation in pharmaceutical marketing and to explore the relationships among related variables. The pharmaceutical industry's intense global marketing strategies have resulted in widespread concern in healthcare professionals and professional groups, sectors of the public in many countries, and in the World Health Organization. Research on healthcare providers' participation in pharmaceutical marketing indicates that these relationships are conflicts of interests and compromise healthcare providers' prescribing practices and trust. Nursing, as a discipline, appears to be slow to address the impact of pharmaceutical marketing on nursing practice. Questionnaires about perceptions and participation in pharmaceutical marketing were completed by a random sample of 84 licensed family nurse practitioners in the United States of America in 2007. Family nurse practitioners viewed pharmaceutical company marketing uncritically as educational and beneficial. They also perceived other providers but not themselves as influenced by pharmaceutical marketing. The findings supported those found in previous research with nurses and physicians. Lack of education, participation in marketing and psychological and social responses may impede family nurse practitioners' ability to respond critically and appropriately to marketing strategies and the conflict of interest it creates.

Public funding and private investment for R&D: a survey in China’s pharmaceutical industry

Science.gov (United States)

2014-01-01

Background In recent years, China has experienced tremendous growth in its pharmaceutical industry. Both the Chinese government and private investors are motivated to invest into pharmaceutical research and development (R&D). However, studies regarding the different behaviors of public and private investment in pharmaceutical R&D are scarce. Therefore, this paper aims to investigate the current situation of public funding and private investment into Chinese pharmaceutical R&D. Methods The primary data used in the research were obtained from the China High-tech Industry Statistics Yearbook (2002–2012) and China Statistical Yearbook of Science and Technology (2002–2012). We analyzed public funding and private investment in five aspects: total investment in the industry, funding sources of the whole industry, differences between provinces, difference in subsectors, and private equity/venture capital investment. Results The vast majority of R&D investment was from private sources. There is a significantly positive correlation between public funding and private investment in different provinces of China. However, public funding was likely to be invested into less developed provinces with abundant natural herbal resources. Compared with the chemical medicine subsector, traditional Chinese medicine and biopharmaceutical subsectors obtained more public funding. Further, the effect of the government was focused on private equity and venture capital investment although private fund is the mainstream of this type of investment. Conclusions Public funding and private investment play different but complementary roles in pharmaceutical R&D in China. While being less than private investment, public funding shows its significance in R&D investment. With rapid growth of the industry, the pharmaceutical R&D investment in China is expected to increase steadily from both public and private sources. PMID:24925505

Recent Applications of Chemical Imaging to Pharmaceutical Process Monitoring and Quality Control

OpenAIRE

Gowen, A. A.; O'Donnell, Colm; Cullen, Patrick; Bell, S.

2008-01-01

Chemical Imaging (CI) is an emerging platform technology that integrates conventional imaging and spectroscopy to attain both spatial and spectral information from an object. Vibrational spectroscopic methods, such as Near Infrared (NIR) and Raman spectroscopy, combined with imaging are particularly useful for analysis of biological/pharmaceutical forms. The rapid, non-destructive and non-invasive features of CI mark its potential suitability as a process analytical tool for the pharmaceutica...

Active pharmaceutical ingredient (API) production involving continuous processes--a process system engineering (PSE)-assisted design framework.

Science.gov (United States)

Cervera-Padrell, Albert E; Skovby, Tommy; Kiil, Søren; Gani, Rafiqul; Gernaey, Krist V

2012-10-01

A systematic framework is proposed for the design of continuous pharmaceutical manufacturing processes. Specifically, the design framework focuses on organic chemistry based, active pharmaceutical ingredient (API) synthetic processes, but could potentially be extended to biocatalytic and fermentation-based products. The method exploits the synergic combination of continuous flow technologies (e.g., microfluidic techniques) and process systems engineering (PSE) methods and tools for faster process design and increased process understanding throughout the whole drug product and process development cycle. The design framework structures the many different and challenging design problems (e.g., solvent selection, reactor design, and design of separation and purification operations), driving the user from the initial drug discovery steps--where process knowledge is very limited--toward the detailed design and analysis. Examples from the literature of PSE methods and tools applied to pharmaceutical process design and novel pharmaceutical production technologies are provided along the text, assisting in the accumulation and interpretation of process knowledge. Different criteria are suggested for the selection of batch and continuous processes so that the whole design results in low capital and operational costs as well as low environmental footprint. The design framework has been applied to the retrofit of an existing batch-wise process used by H. Lundbeck A/S to produce an API: zuclopenthixol. Some of its batch operations were successfully converted into continuous mode, obtaining higher yields that allowed a significant simplification of the whole process. The material and environmental footprint of the process--evaluated through the process mass intensity index, that is, kg of material used per kg of product--was reduced to half of its initial value, with potential for further reduction. The case-study includes reaction steps typically used by the pharmaceutical

Pharmaceutical drug detailing in primary care: extent and methods

DEFF Research Database (Denmark)

Schramm, Jesper

The dimension and methods of pharmaceutical marketing towards 47 danish general practitioners is described. Conclusions: Pharmaceutical drug detailing possesses a huge potential to influence the prescription pattern of GP's.......The dimension and methods of pharmaceutical marketing towards 47 danish general practitioners is described. Conclusions: Pharmaceutical drug detailing possesses a huge potential to influence the prescription pattern of GP's....

Environmental presence and persistence of pharmaceuticals: An overview

Science.gov (United States)

Glassmeyer, Susan T.; Koplin, Dana W.; Furlong, Edward T.; Focazio, M.

2008-01-01

Emerging contaminants (ECs) in the environment – that is, chemicals with domestic, municipal, industrial, or agricultural sources that are not commonly monitored but may have the potential for adverse environmental effects – is a rapidly growing field of research. The use of “emerging” is not intended to infer that the presence of these compounds in the environment is new. These chemicals have been released into the environment as long as they have been in production or, in the case of hormones and other endogenous compounds, since the rise of animal life. What is emerging is the interest by the scientific and lay communities in the presence of these chemicals in the environment, the analytical capabilities required for detection, and the subtle effects that very small concentrations of these chemicals appear to have on aquatic biota. In December 2006, Environmental Science & Technology devoted an entire special issue (volume 40, number 23) to the topic of ECs, illustrating the increased interest in the subject. Within the EGs, one particular class that has seen a substantial increase in research over the past 10 years is pharmaceuticals and personal-care products (PPCPs). This increased research interest can be demonstrated by several means, including requests for proposals from funding agencies, but the clearest indication of a focused effort to understand the introduction, transformation, and potential health and environmental effects of PPCPs and ECs, in general, is the number of published reports. This increase can be shown by examining six environmental journals that regularly publish PPCP-related papers – Chemosphere, Environmental Science & Technology, Environmental Toxicology and Chemistry, Science of the Total Environment, Water Research, and Water Science and Technology. In 1998 there were 22 papers published on pharmaceuticals, antibiotics, or drugs in these 6 journals; by 2006, this number increased sixfold to 132 papers (Figure 1.1).This

EU pharmaceutical expenditure forecast.

Science.gov (United States)

Urbinati, Duccio; Rémuzat, Cécile; Kornfeld, Åsa; Vataire, Anne-Lise; Cetinsoy, Laurent; Aballéa, Samuel; Mzoughi, Olfa; Toumi, Mondher

2014-01-01

With constant incentives for healthcare payers to contain their pharmaceutical budgets, forecasting has become critically important. Some countries have, for instance, developed pharmaceutical horizon scanning units. The objective of this project was to build a model to assess the net effect of the entrance of new patented medicinal products versus medicinal products going off-patent, with a defined forecast horizon, on selected European Union (EU) Member States' pharmaceutical budgets. This model took into account population ageing, as well as current and future country-specific pricing, reimbursement, and market access policies (the project was performed for the European Commission; see http://ec.europa.eu/health/healthcare/key_documents/index_en.htm). In order to have a representative heterogeneity of EU Member States, the following countries were selected for the analysis: France, Germany, Greece, Hungary, Poland, Portugal, and the United Kingdom. A forecasting period of 5 years (2012-2016) was chosen to assess the net pharmaceutical budget impact. A model for generics and biosimilars was developed for each country. The model estimated a separate and combined effect of the direct and indirect impacts of the patent cliff. A second model, estimating the sales development and the risk of development failure, was developed for new drugs. New drugs were reviewed individually to assess their clinical potential and translate it into commercial potential. The forecast was carried out according to three perspectives (healthcare public payer, society, and manufacturer), and several types of distribution chains (retail, hospital, and combined retail and hospital). Probabilistic and deterministic sensitivity analyses were carried out. According to the model, all countries experienced drug budget reductions except Poland (+€41 million). Savings were expected to be the highest in the United Kingdom (-€9,367 million), France (-€5,589 million), and, far behind them

Doctors and pharmaceutical industry.

Science.gov (United States)

Beran, Roy G

2009-09-01

The pharmaceutical industry is seen as seducing doctors by providing expensive gifts, subsidising travel and underwriting practice expenses in return for those doctors prescribing products that otherwise they would not use. This paints doctors in a very negative light; suggests doctors are available to the highest bidder; implies doctors do not adequately act as independent agents; and that doctors are driven more by self-interest than by patient needs. Similar practices, in other industries, are accepted as normal business behaviour but it is automatically assumed to be improper if the pharmaceutical industry supports doctors. Should the pharmaceutical industry withdraw educational grants then there would be: fewer scientific meetings; reduced attendance at conferences; limited post graduate education; and a depreciated level of maintenance of professional standards. To suggest that doctors prescribe inappropriately in return for largesse maligns their integrity but where there is no scientific reason to choose between different treatments then there can be little argument against selecting the product manufactured by a company that has invested in the doctor and the question arises as to whether this represents bad medicine? This paper will examine what constitutes non-professional conduct in response to inducements by the pharmaceutical industry. It will review: conflict of interest; relationships between doctors and pharma and the consequences for patients; and the need for critical appraisal before automatically decrying this relationship while accepting that there remain those who do not practice ethical medicine.

The Impact of Biotechnology on Pharmaceutics.

Science.gov (United States)

Block, Lawrence H.

1990-01-01

The emergence of bioactive peptides and proteins as new drug species poses formidable problems for the pharmaceutical scientist. Implications for revision or change in undergraduate and graduate pharmaceutics curricula derive from the biopharmaceutical, pharmacokinetic, and physiochemical aspects of the new drug species, which differ from…

[Technology transfer to the facility for production of medicines].

Science.gov (United States)

Beregovykh, V V; Spitskiĭ, O P

2013-01-01

Innovation development of pharmaceutical industry is close connected to knowledge transfer going to each subsequent life cycle phase of medicinal product. Formal regulation of technology and knowledge transfer is essential for achievement high quality during production of medicines designed during development phase. Conceptual tools, approaches and requirements are considered that are necessary for knowledge and technology transfer across all the life cycle phases of medicines. They are based on scientific knowledge of medicinal products and take into account both international and Russian regulations in the area of development, production and distribution of medicines. Importance of taking into consideration all aspects related to quality of medicines in all steps of technology transfer is shown. An approach is described for technology transfer organization for Russian pharmaceutical manufacturers based on international guides in this area.

Laser-induced breakdown spectroscopy-based investigation and classification of pharmaceutical tablets using multivariate chemometric analysis

Science.gov (United States)

Myakalwar, Ashwin Kumar; Sreedhar, S.; Barman, Ishan; Dingari, Narahara Chari; Rao, S. Venugopal; Kiran, P. Prem; Tewari, Surya P.; Kumar, G. Manoj

2012-01-01

We report the effectiveness of laser-induced breakdown spectroscopy (LIBS) in probing the content of pharmaceutical tablets and also investigate its feasibility for routine classification. This method is particularly beneficial in applications where its exquisite chemical specificity and suitability for remote and on site characterization significantly improves the speed and accuracy of quality control and assurance process. Our experiments reveal that in addition to the presence of carbon, hydrogen, nitrogen and oxygen, which can be primarily attributed to the active pharmaceutical ingredients, specific inorganic atoms were also present in all the tablets. Initial attempts at classification by a ratiometric approach using oxygen to nitrogen compositional values yielded an optimal value (at 746.83 nm) with the least relative standard deviation but nevertheless failed to provide an acceptable classification. To overcome this bottleneck in the detection process, two chemometric algorithms, i.e. principal component analysis (PCA) and soft independent modeling of class analogy (SIMCA), were implemented to exploit the multivariate nature of the LIBS data demonstrating that LIBS has the potential to differentiate and discriminate among pharmaceutical tablets. We report excellent prospective classification accuracy using supervised classification via the SIMCA algorithm, demonstrating its potential for future applications in process analytical technology, especially for fast on-line process control monitoring applications in the pharmaceutical industry. PMID:22099648

Homochiral drugs: a demanding tendency of the pharmaceutical industry.

Science.gov (United States)

Núñez, María C; García-Rubiño, M Eugenia; Conejo-García, Ana; Cruz-López, Olga; Kimatrai, María; Gallo, Miguel A; Espinosa, Antonio; Campos, Joaquín M

2009-01-01

The issue of drug chirality is now a major theme in the design and development of new drugs, underpinned by a new understanding of the role of molecular recognition in many pharmacologically relevant events. In general, three methods are utilized for the production of a chiral drug: the chiral pool, separation of racemates, and asymmetric synthesis. Although the use of chiral drugs predates modern medicine, only since the 1980's has there been a significant increase in the development of chiral pharmaceutical drugs. An important commercial reason is that as patents on racemic drugs expire, pharmaceutical companies have the opportunity to extend patent coverage through development of the chiral switch enantiomers with desired bioactivity. Stimulated by the new policy statements issued by the regulatory agencies, the pharmaceutical industry has systematically begun to develop chiral drugs in enantiometrically enriched pure forms. This new trend has caused a tremendous change in the industrial small- and large-scale production to enantiomerically pure drugs, leading to the revisiting and updating of old technologies, and to the development of new methodologies of their large-scale preparation (as the use of stereoselective syntheses and biocatalyzed reactions). The final decision whether a given chiral drug will be marketed in an enantiomerically pure form, or as a racemic mixture of both enantiomers, will be made weighing all the medical, financial and social proficiencies of one or other form. The kinetic, pharmacological and toxicological properties of individual enantiomers need to be characterized, independently of a final decision.

[The aspects of pricing policy in Azerbaijan pharmaceutical sector].

Science.gov (United States)

Dzhalilova, K I; Alieva, K Ia

2012-01-01

The effect of macro-, middle- and microeconomic factors on price formation in Azerbaijan pharmaceutical market has been studied. Worldwide pharmaceutical leaders have the goals to become leader on the pharmaceutical market of Azerbaijan and maximize their market share. Non-leaders pharmaceutical companies use different strategies of price formation: prime cost plus markup, or price formation on the base of current prices. It was revealed that domestic pharmaceutical market has high demand elasticity. Future market development is related to stimulation of product development, and hard penetration to the market through realization of price formation strategy. Non-state pharmaceutical organizations to achieve the purpose of survive in conditions of high competition should take in to account the factor perceptions of assortment by customers.

Uptake and depuration of pharmaceuticals in aquatic invertebrates

International Nuclear Information System (INIS)

Meredith-Williams, Melanie; Carter, Laura J.; Fussell, Richard; Raffaelli, David; Ashauer, Roman; Boxall, Alistair B.A.

2012-01-01

The uptake and depuration of a range of pharmaceuticals in the freshwater shrimp (Gammarus pulex) and the water boatman (Notonecta glauca) was studied. For one compound, studies were also done using the freshwater snail Planobarius corneus. In G. pulex, bioconcentration factors (BCFs) ranged from 4.6 to 185,900 and increased in the order moclobemide < 5-fluoruracil < carbamazepine < diazepam < carvedilol < fluoxetine. In N. glauca BCFs ranged from 0.1 to 1.6 and increased in the order 5-fluorouracil < carbamazepine < moclobemide < diazepam < fluoxetine < carvedilol. For P. corneus, the BCF for carvedilol was 57.3. The differences in degree of uptake across the three organisms may be due to differences in mode of respiration, behaviour and the pH of the test system. BCFs of the pharmaceuticals for each organism were correlated to the pH-corrected liposome–water partition coefficient of the pharmaceuticals. - Highlights: ► One of the first studies exploring the uptake of pharmaceuticals into aquatic invertebrates. ► Data presented on uptake, depuration rates and bioconcentration for a range of pharmaceuticals. ► Uptake is correlated with the pH-corrected liposome–water partition coefficient. ► Findings can be used to better predict impacts of pharmaceuticals on the aquatic environment. - The factors affecting the degree of uptake of pharmaceuticals into aquatic invertebrates were studied. The results indicate that species traits such as respiration and behaviour of the organisms and pH-corrected liposome–water partition coefficients are important factors in determining pharmaceutical uptake.

Pharmaceutical expenditure changes in Serbia and Greece during the global economic recession

Directory of Open Access Journals (Sweden)

Mihajlo Jakovljevic

2016-04-01

Full Text Available Aim: Clarity on health expenditures is essential for the timely identification of risks that jeopardize the democratic provision of health services and the credibility of health insurance systems. Furthermore, observing health outcomes with geographical scope is essential for making multilateral associations. This study aimed at conveying information on the variability of important economic parameters of the health sector of Serbia and Greece from 2007 to 2012, when the most serious financial crisis in the post-war economic history hit the global economy. Methods: Exchange rates, purchase-power-parities (PPP and price indices were used for the bilateral review of health and pharmaceutical expenditure dynamics during 2007-2012. Prescription and dispensing changes were also studied taking into account the anatomical therapeutic chemical (ATC structure of drugs consumed. Results: Greece was forced to cut down its total health care and pharmaceutical expenditure and mainly its out-of-pocket payments were more seriously affected by the recession. Surprisingly, emerging market of Serbia, although severely damaged by global recession, succeeded to maintain 19% growth of its per capita health expenditure and even 25% increase of its per capita spending on pharmaceuticals. Innovative pharmaceuticals showed an upward trend in both countries. Conclusions: These two countries might serve as an example of two distinct pathways of mature and emerging health care markets during financial constraints caused by global recession. Our findings show that producing disease-based feedback, in the long run, may empower the assessment of the return on investment on medical technology and healthcare systems’ cost-effectiveness.

Pharmaceutical and Medicine Manufacturing Sector (NAICS 3254)

Science.gov (United States)

Find environmental regulatory and compliance information for the pharmaceutical manufacturing sector, including essential uses of CFCs, NESHAP for pharmaceutical production, effluent guidelines for wastewater and management of hazardous waste.

Situation analysis of R & d activities: an empirical study in Iranian pharmaceutical companies.

Science.gov (United States)

Rasekh, Hamid Reza; Mehralian, Gholamhossein; Vatankhah-Mohammadabadi, Abbas Ali

2012-01-01

As global competition intensifies, research and development (R & D) organizations need to enhance their strategic management in order to become goal-directed communities for innovation and allocate their resources consistent with their overall R & D strategy. The world pharmaceutical market has undergone fast, unprecedented, tremendous and complex changes in the last several years. The pharmaceutical industry is today still one of the most inventive, innovative and lucrative of the so-called "high-tech" industries. This industry serves a dual role in modern society. On one hand, it is a growing industry, and its output makes a direct contribution to gross domestic product (GDP). On the other side, drugs, this industry's major output, are an input in the production of good health. The purpose of this study is to evaluate R & D activities of pharmaceutical companies, and also to highlight critical factors which have influential effect on results of these activities. To run this study a valid questionnaire based on literature review and experts' opinion was designed and delivered to 11 pharmaceutical companies. Empirical data show there is not acceptable situations considering of the factors that should be taken in to account by managers including; management commitment, human resource management, information technology and financial management. Furthermore, we concluded some interesting results related to different aspects of R & D management. In conclusion, managers must be aware about their performance in R & D activities, accordingly they will able to take a comprehensive policy in both national and within the company.

A model of the prescription-pharmaceutical sales process

Directory of Open Access Journals (Sweden)

Michael Stros

2018-06-01

Full Text Available The purpose of this paper is to determine the factors in marketing most relevant to achieving pharmaceutical sales success and their interrelations, as well as providing a prescription-pharmaceuticals sales process model. This will enable scholars to obtain a better understanding of the marketing process for prescription pharmaceuticals, as well as enabling marketers to apply more efficient marketing approaches. The study uses a unique data set, combining primary data and secondary data from the Swiss prescription-pharmaceuticals market. The data is analysed using a multiple-regression based model. A multi-level data structure is found, suggesting that factors concerning the specific brand and also the pharmaceutical substance itself are relevant to sales success. It is revealed that the factors most relevant to sales success are: order of market entry, perceived product-quality, average price, and marketing expenditures, leading to practical recommendations for scholars and marketing professionals. The study focuses only on the Swiss prescription-pharmaceuticals market, investigating five medical drug classes. The assumption is made that these results can be generalised to similar markets and drug classes. The study develops a conceptual prescription-pharmaceuticals sales-process model; offers practical guidelines and a good basis for further scholarly research are provided; and identifies several research gaps by giving proposals for future research.

Monopolistic structures and industrial analysis in Spain: the case of the pharmaceutical industry.

Science.gov (United States)

Lobo, F

1979-01-01

This article seeks to illustrate the monopolistic structure of the Spanish pharmaceutical industry, focusing on its many dimensions. The basic conditions of technology and demand, product differentiation, effect of advertising, and barriers to entry are considered, as is financial and economic concentration. Although economic conditions are emphasized, the ways they affect public and private health, the quality of health services, and health education are also highlighted.

Toward a Regional Research Agenda on Pharmaceutical ...

International Development Research Centre (IDRC) Digital Library (Canada)

African policymakers are pushing for local pharmaceutical manufacturing as a ... Africa Development Community Pharmaceutical Business Plan (2007-2013) and ... IDRC congratulates first cohort of Women in Climate Change Science Fellows.

Concept of the Ural pharmaceutical cluster formation

Directory of Open Access Journals (Sweden)

Aleksandr Petrovich Petrov

2011-06-01

Full Text Available This paper substantiates the necessity of cluster organization of the pharmaceutical industry in the region. The estimation of the state and prospects of development of such structures in the domestic economy is given. Sverdlovsk region was chosen as the object of study on the possibility of forming a pharmaceutical cluster. Objective prerequisites for the organization of a cluster of pharmaceutical production in Sverdlovsk region are considered, among these were distinguished: capacious and fast-growing market for pharmaceutical products, availability of potential development of the pharmaceutical industry in the territory and the key success factors for enterprises - potential participants of the cluster. Indicated key success factors are: presence of a creative team and close interaction between business and government, high level of cooperation among the enterprises of the cluster and commercialization of products, implementation of research and development expenditures etc. Thus, it was substantiated that in there all references and resources for the formation of a pharmaceutical cluster. The concept of formation and development of the Ural pharmaceutical cluster was elaborated. Inside the concept, the goals, objectives, processing, product and organizational priorities for cluster formation are identified. Architecture of this structure with a justification of its members and certain forms of interaction between them is proposed. The stages of formation and development of the Ural pharmaceutical cluster on the basis of a ten-year settlement period for the full range of activities for this project are substantiated. At each stage, a set of key objectives and results of the cluster was defined. The choice of phases was carried out on the basis of investment programs of cluster's enterprises strategic position on the mastering of markets and infrastructure development. An assessment of socio-economic efficiency of the Ural pharmaceutical

Modelling of drying processes of pharmaceutical granules. Pharmaceutical Sciences for the Future of Medicines

DEFF Research Database (Denmark)

Mortier, S.T.F.C.; Vedantam, S.; De Beer, T.

Tablets are conventionally produced via consecutive batch process steps. Recent introduction of continuous process equipment is gaining industrial importance in pharmaceutics. Transition to continuous production requires improved understanding of all operations, necessitating the development...... of mechanistic models of multi‐phase systems which in the end allow process control. This contribution focuses on continuous fluidized bed drying of pharmaceutical wet granules. A stepwise approach is used in model development, starting with the drying behaviour of single granules. Experiments to determine...

Pharmaceutical product cross-contamination: industrial and clinical ...

African Journals Online (AJOL)

problems. Pharmaceutical product cross-contamination is a serious problem which has been detected as an obstacle ... In the pharmaceutical care of patients in developed countries, cross-contamination ..... neonatal intensive care units.

Quality Systems Implementation in the Pharmaceutical Industry

African Journals Online (AJOL)

Nafiisah

quality standards imposed on local pharmaceutical manufacturers. Keywords: Quality/ .... GMP is concerned with both production and quality control. It is aimed ... in the European pharmaceutical industry in designing their quality systems:.

PHARMACEUTICAL COMPANIES BETWEEN CRISIS AND COMPETITIVENESS - SECTORAL DIAGNOSIS

Directory of Open Access Journals (Sweden)

Mihaela\tBÎRSAN

2015-06-01

Full Text Available The evolution of the pharmaceutical industry was a positive constant with the indicators of industrial production even in years of crisis. Although the economic crisis in Romania decreased average growth rate of pharmaceutical companies, market value is expected to increase. The explanation comes from the fact that in order to boost productivity, pharmaceutical companies are turning to emerging countries with aging populations such as open new markets for future development. Add to this the recent health policies implemented by newly industrialized countries that are aimed at ensuring increased access to care. Analysts see the field phenomenon called "Farma-merger" a good chance for European pharmaceutical companies oriented to developing countries where drug sales should record a double-digit annual growth until 2017. In Erste Group reports stated that the impact of the crisis on the pharmaceutical industry should be limited markets for EU only their economic slowdown. This will be possible because the external indebtedness of pharmaceutical companies in the EU remains at a minimum, they are able to finance their investment plans without tapping financial markets, are not adversely affected by the current limited availability of credit resources. Therefore major pharmaceutical companies in the EU will remain a solid investment on the long term, the negative developments are limited due to high resistance to the crisis their business model segment "generic". The consequence of these developments is reflected in the recognition for the first time, the pharmaceutical sector as a strategic sector for the Romanian economy. In the context of public debate launching the National Strategy for Competitiveness 2014-2020, Generic Medicines Industry Association of Romania (APMGR local pharmaceutical industry reminds the Government proposals on correcting the current fiscal and operational regulatory framework, to allow unlocking investments in facilities

Cost benefit of investment on quality in pharmaceutical manufacturing: WHO GMP pre- and post-certification of a Nigerian pharmaceutical manufacturer.

Science.gov (United States)

Anyakora, Chimezie; Ekwunife, Obinna; Alozie, Faith; Esuga, Mopa; Ukwuru, Jonathan; Onya, Steve; Nwokike, Jude

2017-09-18

Pharmaceutical companies in Africa need to invest in both facilities and quality management systems to achieve good manufacturing practice (GMP) compliance. Compliance to international GMP standards is important to the attainment of World Health Organization (WHO) prequalification. However, most of the local pharmaceutical manufacturing companies may be deterred from investing in quality because of many reasons, ranging from financial constraints to technical capacity. This paper primarily evaluates benefits against the cost of investing in GMP, using a Nigerian pharmaceutical company, Chi Pharmaceuticals Limited, as a case study. This paper also discusses how to drive more local manufacturers to invest in quality to attain GMP compliance; and proffers practical recommendations for local manufacturers who would want to invest in quality to meet ethical and regulatory obligations. The cost benefit of improving the quality of Chi Pharmaceuticals Limited's facilities and system to attain WHO GMP certification for the production of zinc sulfate 20-mg dispersible tablets was calculated by dividing the annual benefits derived from quality improvement interventions by the annual costs of implementing quality improvement interventions, referred to as a benefit-cost ratio (BCR). Cost benefit of obtaining WHO GMP certification for the production of zinc sulfate 20-mg dispersible tablets was 5.3 (95% confidence interval of 5.0-5.5). Investment in quality improvement intervention is cost-beneficial for local manufacturing companies. Governments and regulators in African countries should support pharmaceutical companies striving to invest in quality. Collaboration of local manufacturing companies with global companies will further improve quality. Local pharmaceutical companies should be encouraged to key into development opportunities available for pharmaceutical companies in Africa.

Pharmaceutical regulation in 15 European countries review.

Science.gov (United States)

Panteli, Dimitra; Arickx, Francis; Cleemput, Irina; Dedet, Guillaume; Eckhardt, Helen; Fogarty, Emer; Gerkens, Sophie; Henschke, Cornelia; Hislop, Jennifer; Jommi, Claudio; Kaitelidou, Daphne; Kawalec, Pawel; Keskimaki, Ilmo; Kroneman, Madelon; Lopez Bastida, Julio; Pita Barros, Pedro; Ramsberg, Joakim; Schneider, Peter; Spillane, Susan; Vogler, Sabine; Vuorenkoski, Lauri; Wallach Kildemoes, Helle; Wouters, Olivier; Busse, Reinhard

2016-10-01

In the context of pharmaceutical care, policy-makers repeatedly face the challenge of balancing patient access to effective medicines with affordability and rising costs. With the aim of guiding the health policy discourse towards questions that are important to actual and potential patients, this study investigates a broad range of regulatory measures, spanning marketing authorization to generic substitution and resulting price levels in a sample of 16 European health systems (Austria, Belgium, Denmark, England, Finland, France, Germany, Greece, Ireland, Italy, the Netherlands, Poland, Portugal, Scotland, Spain and Sweden). All countries employ a mix of regulatory mechanisms to contain pharmaceutical expenditure and ensure quality and efficiency in pharmaceutical care, albeit with varying configurations and rigour. This variation also influences the extent of publicly financed pharmaceutical costs. Overall, observed differences in pharmaceutical expenditure should be interpreted in conjunction with the differing volume and composition of consumption and price levels, as well as dispensation practices and their impact on measurement of pharmaceutical costs. No definitive evidence has yet been produced on the effects of different cost-containment measures on patient outcomes. Depending on the foremost policy concerns in each country, different levers will have to be used to enable the delivery of appropriate care at affordable prices. World Health Organization 2016 (acting as the host organization for, and secretariat of, the European Observatory on Health Systems and Policies).

Cleaner production at pharmaceutical industry: first steps assessment

Directory of Open Access Journals (Sweden)

Edilaine Conceição Rezende

2015-12-01

Full Text Available The Cleaner Production (CP is an environmental management system effective to comply the environmental obligations and promote sustainable development of enterprises. In this study, the implementing possibilities of CP practices were evaluated to pharmaceutical industry, through prior identification procedures for Pharmaceutical Manufacturing Practices. The study was conducted in a scientific and health care institution, which produces pharmaceutical drugs and makes assistance for public health. The production process was evaluated and made a survey of the main points of waste and sewage generations in each stage, in order to diagnose the measures of CP established and propose new actions. Thus, by using this tool, it was possible to demonstrate the reduction of environmental impacts associated with pharmaceutical production. The Pharmaceutical Manufacturing Practices also contributed to the implementation of measures CP, preserving the final product quality, and generating environmental and economic benefits.

Pharmaceutical services and health promotion: how far have we gone and how are we faring? Scientific output in pharmaceutical studies

Directory of Open Access Journals (Sweden)

Carina Akemi Nakamura

2014-12-01

Full Text Available The objective of this study was to investigate the scientific output on health promotion within the pharmaceutical field and its relation with the development of pharmaceutical services within health systems. A comprehensive review of published scientific articles from the Medline and Lilacs databases was carried out. The review comprised articles published until December 2011, and used combinations of the terms 'health promotion' or 'health education' and 'pharmacy', 'pharmacist' or 'pharmaceutical'. The articles were selected according to inclusion and exclusion criteria. A total of 170 full texts and 87 indexed abstracts were analyzed, evidencing that most described actions of health promotion in community pharmacies and other services. Following the Ottawa Charter, most of the studies dealt with new guidance of the service and the supply of pharmaceutical information and services. It was concluded that there is a lack of theoretical background on health promotion in the pharmaceutical field to sustain the professional education and practice required by the health system and the population.

East and Central African Journal of Pharmaceutical Sciences An ...

African Journals Online (AJOL)

An Approach to Effective Disinfection of Salon Items [clippers, combs and scissors]. O.S. OLONITOLA'*, P.F. OLURINOLA~ ... 2~epartment of Pharmaceutics and Pharmaceutical Microbiology, Faculty of Pharmaceutical. Sciences, Ahmadu Bello ... antimicrobial products with increased value over those currently available.

The use of atomic spectroscopy in the pharmaceutical industry for the determination of trace elements in pharmaceuticals.

Science.gov (United States)

Lewen, Nancy

2011-06-25

The subject of the analysis of various elements, including metals and metalloids, in the pharmaceutical industry has seen increasing importance in the last 10-15 years, as modern analytical instrumentation has afforded analysts with the opportunity to provide element-specific, accurate and meaningful information related to pharmaceutical products. Armed with toxicological data, compendial and regulatory agencies have revisited traditional approaches to the testing of pharmaceuticals for metals and metalloids, and analysts have begun to employ the techniques of atomic spectroscopy, such as flame- and graphite furnace atomic absorption spectroscopy (FAAS, Flame AA or FAA and GFAAS), inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and inductively coupled plasma-mass spectrometry (ICP-MS), to meet their analytical needs. Newer techniques, such as laser-induced breakdown spectroscopy (LIBS) and Laser Ablation ICP-MS (LAICP-MS) are also beginning to see wider applications in the analysis of elements in the pharmaceutical industry.This article will provide a perspective regarding the various applications of atomic spectroscopy in the analysis of metals and metalloids in drug products, active pharmaceutical ingredients (API's), raw materials and intermediates. The application of atomic spectroscopy in the analysis of metals and metalloids in clinical samples, nutraceutical, metabolism and pharmacokinetic samples will not be addressed in this work. Copyright © 2010 Elsevier B.V. All rights reserved.

Pharmaceutical policy and the lay public

DEFF Research Database (Denmark)

Traulsen, Janine Marie; Almarsdóttir, Anna Birna

2005-01-01

Almost every national and supranational health policy document accords high importance to the need to listen to and 'empower' patients. The relationship between pharmaceutical policy and the lay public is not direct but mediated by several actors, including health care workers, patient organisati......Almost every national and supranational health policy document accords high importance to the need to listen to and 'empower' patients. The relationship between pharmaceutical policy and the lay public is not direct but mediated by several actors, including health care workers, patient...... organisations, industry and, most recently, the media. Although the overall aim of health and pharmaceutical policy is to address the needs of all citizens, there are only a few, well organised groups who are actually consulted and involved in the policymaking process, often with the support of the industry....... The reasons for this lack of citizen involvement in health and pharmaceutical policymaking are many, for example: there is no consensus about what public involvement means; there is a predominance of special interest groups with narrow, specific agendas; not all decision makers welcome lay participation...

Pharmaceutical care in the Netherlands. History, definition and projects

NARCIS (Netherlands)

van Mil, J.W F

1996-01-01

The evolving concept of Pharmaceutical Care knows different interpretations in a different countries. In the Netherlands community pharmacists already perform several functions which may be part of the Pharmaceutical Care concept. The Dutch concept of Pharmaceutical care is tested in the TOM and

Pharmaceutical new product development: the increasing role of in-licensing.

Science.gov (United States)

Edwards, Nancy V

2008-12-01

Many pharmaceutical companies are facing a pipeline gap because of the increasing economic burden and uncertainty associated with internal research and development programs designed to develop new pharmaceutical products. To fill this pipeline gap, pharmaceutical companies are increasingly relying on in-licensing opportunities. New business development identifies new pharmaceuticals that satisfy unmet needs and are a good strategic fit for the company, completes valuation models and forecasts, evaluates the ability of the company to develop and launch products, and pursues in-licensing agreements for pharmaceuticals that cannot be developed internally on a timely basis. These agreements involve the transfer of access rights for patents, trademarks, or similar intellectual property from an outside company in exchange for payments. Despite the risks, in-licensing is increasingly becoming the preferred method for pharmaceutical companies with pipeline gaps to bring new pharmaceuticals to the clinician.

Care ideologies reflected in 4 conceptions of pharmaceutical care.

Science.gov (United States)

Björkman, Ingeborg K; Bernsten, Cecilia B; Sanner, Margareta A

2008-12-01

Different ways to practice pharmaceutical care have been developed. One expression of this fact is the existence of many different classification systems to document drug-related problems (DRPs). Evidence suggests that classification systems have different characteristics and that these characteristics reflect different conceptions of pharmaceutical care. To increase the understanding of conceptions of pharmaceutical care, underlying values and beliefs (ideologies) can be explored. To explore various conceptions of pharmaceutical care to identify the care ideologies on which these conceptions are based. Representatives of 4 selected conceptions of pharmaceutical care were interviewed in face-to-face meetings. During the interviews, 4 basic questions were asked. Three were focused on pharmaceutical care and 1 on DRPs. Interview transcripts were analyzed by an inductive method inspired by grounded theory. The conceptions studied were Strand, Granada-II, PCNE v5.0, and Apoteket. In Strand, patients are given a more active role in the pharmaceutical care process, as compared to Granada-II, PCNE v5.0, and Apoteket. Pharmacists in all the conceptions of pharmaceutical care assume they have special knowledge that patients benefit from. However, they use their knowledge in different ways in the various pharmaceutical care conceptions. In Strand, individual goals of drug therapy are established together with the patient, whereas in Granada-II, PCNE, and Apoteket goals are not explicitly discussed. The identified differences correspond to different care ideologies. The pharmaceutical care conceptions are based on different care ideologies. The ideology is expressed in how therapy goals are set and patient needs defined. Strand is based on a patient-centered ideology; patient therapy goals and needs are defined by the patient together with the practitioners. Granada-II, PCNE, and Apoteket are based on an evidence-based medicine approach; patient therapy goals and needs are

Cell-Based Veterinary Pharmaceuticals - Basic Legal Parameters Set by the Veterinary Pharmaceutical Law and the Genetic Engineering Law of the European Union.

Science.gov (United States)

Faltus, Timo; Brehm, Walter

2016-01-01

Cell-based therapies have been in use in veterinary medicine for years. However, the legal requirement of manufacturing, placing on the market and use of cell-based veterinary pharmaceuticals are not as well developed as the respective requirements of chemical pharmaceuticals. Cell-based veterinary pharmaceuticals are medicinal products in the sense of the pharmaceutical law of the European Union (EU). For that reason, such medicinal products principally require official approval for their manufacture and an official marketing authorization for their placement on the market before being used by the veterinarian. The manufacture, placing on the market, and use of cell-based veterinary pharmaceuticals without manufacturing approval and marketing authorization is permitted only in certain exceptional cases determined by EU and individual Member State law. Violations of this requirement may have consequences for the respective veterinarian under criminal law and under the code of professional conduct in the respective Member State. The regular use of cell-based veterinary pharmaceuticals within the scope of a therapeutic emergency as well as the import of such veterinary pharmaceuticals from non-European countries for use in the EU are currently out of the question in the EU because of a lack of legal bases. Here, we review the general legal requirement of manufacturing, placing on the market, and use of cell-based veterinary pharmaceuticals within the EU and point out different implementations of EU law within the different Member States.

A strategy to improve skills in pharmaceutical supply management in East Africa: the regional technical resource collaboration for pharmaceutical management

Directory of Open Access Journals (Sweden)

Minzi Omary

2008-12-01

Full Text Available Abstract Background International initiatives such as the Global Fund to Fight AIDS, Tuberculosis and Malaria, the President's Emergency Plan for AIDS Relief and the President's Malaria Initiative have significantly increased availability and access to medicines in some parts of the developing world. Despite this, however, skills remain limited on quantifying needs for medications and ordering, receiving and storing medications appropriately; recording medications inventories accurately; distributing medications for use appropriately; and advising patients on how to use medications appropriately. The Regional Technical Resource Collaboration for Pharmaceutical Management (RTRC has been established to help address the problem of skills shortage in pharmaceutical management in East Africa. Methods The initiative brings together academic institutions from four East African countries to participate in skills-building activities in pharmaceutical supply management. The initiative targeted the institutions' ability to conduct assessments of pharmaceutical supply management systems and to develop and implement effective skills-building programmes for pharmaceutical supply chain management. Results Over a two-year period, the RTRC succeeded in conducting assessments of pharmaceutical supply management systems and practices in Kenya, Rwanda, Tanzania and Uganda. In 2006, the RTRC participated in a materials-development workshop in Kampala, Uganda, and contributed to the development of comprehensive HIV/AIDS pharmaceutical management training materials; these materials are now widely available in all four countries. In Tanzania and Uganda the RTRC has been involved with the training of health care workers in HIV/AIDS pharmaceutical management. In Kenya, Tanzania and Uganda the RTRC has been conducting operations research to find solutions to their countries' skills-shortage problems. Some of the interventions tested include applying and evaluating the

Internet pharmaceutical sales: attributes, concerns, and future forecast.

Science.gov (United States)

Bruckel, Katy; Capozzoli, Ernest A

2003-01-01

Internet pharmaceutical sales continue to skyrocket as healthcare providers and consumers are increasingly relying on the efficiencies and convenience that is available via such transactions. Managed care companies, increasing demands to reduce healthcare inefficiencies while maximizing the quality of patient care is a significant contributing factor to the expanding utilization and success of online pharmaceutical sales. However, with the expansion of Internet pharmaceutical sales, healthcare providers, pharmacy benefit management and insurance companies, and consumers realize new opportunities and risks. This paper will review the attributes and concerns associated with online pharmaceutical sales, discussing current and pending legislation intended to more effectively manage these parameters.

The ethics of the medical-pharmaceutical relationship.

Science.gov (United States)

Vashi, Neelam A; Latkowski, Jo-Ann M

2012-01-01

Physician interaction with the pharmaceutical industry raises many ethical concerns. This relationship is complex, owing to a pluralism of beliefs held by physicians, patients, and third parties. As a result, determining whether physicians fulfill their responsibilities to both the professional and public communities is an arduous endeavor. In an effort to clarify the situation and provide transparency to this complex relationship, medical and pharmaceutical organizations have enacted their own respective codes and guidelines. Even with adherence to these guidelines, questions remain regarding the codependent relationship that interweaves the pharmaceutical industry with the medical community. Owing to the ever-changing landscape enmeshing product development, scientific advancement, corporate realities and patient care, the proper choice for physicians is rarely obvious; however, to operate to the highest standards, those in the medical community must be candid about relations with the pharmaceutical industry and transparent in their financial interests. Further undertakings should focus not on the eradication of physician-pharmaceutical interaction, but instead on the education of physicians about industry marketing strategies and the delineation of boundaries of these interactions to benefit not the individual physician, but our patients. Copyright © 2012. Published by Elsevier Inc.

Pharmaceutical care in smoking cessation

Directory of Open Access Journals (Sweden)

Marín Armero A

2015-01-01

Full Text Available Alicia Marín Armero,1 Miguel A Calleja Hernandez,2 Sabina Perez-Vicente,3 Fernando Martinez-Martinez4 1Community Pharmacy, Murcia, Spain; 2Hospital Pharmacy, University Hospital Virgen de las Nieves, Granada, Spain; 3Result Evaluation Unit, Institute of Biomedicine, Sevilla, Spain; 4Research Unit in Pharmaceutical Care, University of Granada, Granada, Spain Abstract: As a determining factor in various diseases and the leading known cause of preventable mortality and morbidity, tobacco use is the number one public health problem in developed countries. Facing this health problem requires authorities and health professionals to promote, via specific programs, health campaigns that improve patients’ access to smoking cessation services. Pharmaceutical care has a number of specific characteristics that enable the pharmacist, as a health professional, to play an active role in dealing with smoking and deliver positive smoking cessation interventions. The objectives of the study were to assess the efficacy of a smoking cessation campaign carried out at a pharmaceutical care center and to evaluate the effects of pharmaceutical care on patients who decide to try to stop smoking. The methodology was an open, analytical, pre–post intervention, quasi-experimental clinical study performed with one patient cohort. The results of the study were that the promotional campaign for the smoking cessation program increased the number of patients from one to 22, and after 12 months into the study, 43.48% of the total number of patients achieved total smoking cessation. We can conclude that advertising of a smoking cessation program in a pharmacy increases the number of patients who use the pharmacy’s smoking cessation services, and pharmaceutical care is an effective means of achieving smoking cessation. Keywords: community pharmacy, health campaign, tobacco cessation, nicotine replacement therapy

Synthetic biology advances for pharmaceutical production

OpenAIRE

Breitling, Rainer; Takano, Eriko

2015-01-01

Synthetic biology enables a new generation of microbial engineering for the biotechnological production of pharmaceuticals and other high-value chemicals. This review presents an overview of recent advances in the field, describing new computational and experimental tools for the discovery, optimization and production of bioactive molecules, and outlining progress towards the application of these tools to pharmaceutical production systems.

Pricing and Reimbursement in U.S. Pharmaceutical Markets

OpenAIRE

Newhouse, Joseph Paul; Berndt, Ernst R.

2010-01-01

In this survey chapter on pricing and reimbursement in U.S. pharmaceutical markets, we first provide background information on important federal legislation, institutional details regarding distribution channel logistics, definitions of alternative price measures, related historical developments, and reasons why price discrimination is highly prevalent among branded pharmaceuticals. We then present a theoretical framework for the pricing of branded pharmaceuticals, without and then in the pre...

Assessing the assessments: Pharmaceuticals in the environment

International Nuclear Information System (INIS)

Enick, O.V.; Moore, M.M.

2007-01-01

The relatively new issue of pharmaceutical contamination of the environment offers the opportunity to explore the application of values to the construction, communication and management of risk. The still-developing regulatory policies regarding environmental contamination with pharmaceuticals provide fertile ground for the introduction of values into the definition and management of risk. In this report, we summarize the current knowledge regarding pharmaceutical contamination of the environment and discuss specific attributes of pharmaceuticals that require special consideration. We then present an analysis showing that if values are incorporated into assessing, characterizing and managing risk, the results of risk assessments will more accurately reflect the needs of various stakeholders. Originating from an acknowledgement of the inherent uncertainty and value-laden nature of risk assessment, the precautionary principle (and later, the multi-criteria, integrated risk assessment), provides a direction for further research and policy development

Old Yet New--Pharmaceuticals from Plants

Science.gov (United States)

Houghton, Peter J.

2001-02-01

Plants or their crude extracts have been used since prehistory to treat human ailments. Plants are still used in this way in many parts of the world, but Western scientific medicine has tended to isolate active compounds, or make derivatives of them, for use as drugs. Compounds produced by the plant have been important pharmaceuticals since the isolation of morphine almost two hundred years ago and new naturally occurring compounds such as paclitaxel are continually being introduced commercially. Bioactive molecules may also be produced from chemicals found in plants by chemical modification using synthetic chemistry or microorganisms (as in the production of steroids). A third major contribution of plant chemicals to drugs is their utilization as templates for the design of new compounds made by synthesis (e.g. the discovery of aspirin and related compounds from substances in willow bark). New pharmaceuticals from plants are being discovered by examining traditional medicines and by large-scale bioassay screening processes. In addition, the chemical survival systems of plants that exist in hostile environments are receiving increasing attention as leads to discover active compounds. The knowledge of botanical relationships helps find new sources of known compounds of interest and novel compounds with similar structures from related species. Future prospects for the discovery of new compounds from plants are broadened by the new technologies of gene manipulation, tissue culture, and combinatorial chemistry, so it is very likely that natural products from plants will continue to play an important role in the fight against disease.

42 CFR 416.48 - Condition for coverage-Pharmaceutical services.

Science.gov (United States)

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Condition for coverage-Pharmaceutical services. 416... Coverage § 416.48 Condition for coverage—Pharmaceutical services. The ASC must provide drugs and... direction of an individual designated responsible for pharmaceutical services. (a) Standard: Administration...

Value of pharmaceuticals: ensuring the future of research and development.

Science.gov (United States)

Serajuddin, Hamida K; Serajuddin, Abu T M

2006-01-01

To analyze the current situation under which the pharmaceutical industry is criticized for the production of drugs with potential adverse effects, the high prices of medicines, and aggressive marketing practices, and to provide a proposal to rectify the situation. Published books, pharmaceutical journals, Web of Science database using the search terms pharmaceutical, research, development, marketing, cost, and the Food and Drug Administration (FDA) Web site. Most breakthroughs in the treatment of diseases and prolongation of lives have come about through pharmaceuticals discovered and developed by the pharmaceutical industry. While the process of discovering and developing new pharmaceuticals is lengthy, costly, and lacking any assurance of success, investment in research and development by the U.S. pharmaceutical industry has increased progressively, reaching 51.3 billion dollars in 2005. Yet the annual number of FDA approvals of new molecular entities (NMEs) has gradually decreased over the past 10 years. Additionally, a large part of the patent life of a successful NME is consumed during this lengthy development phase. Few businesses, if any, have such long product gestation lives and risks. For these reasons, the pharmaceutical industry is often in a rush to recoup its investment before the product's patent expires, and this is the root cause of many criticisms against the pharmaceutical industry. To rectify the current situation, a new system is proposed under which innovator pharmaceutical companies would be allowed royalties for their products after the expiration of patents, in a manner similar to the way in which other intellectual properties (such as books, music, films) are protected by copyright. Such a system would allow pharmaceutical companies to continue research on new pharmaceutical products unimpeded by the patent clock. Given appropriate legislative or other facilitatory actions, a royalty-based system for the marketing of generic products after

[The pharmaceutical industry in the industrial chemical group: the National Union of Chemical-Pharmaceutical Laboratories (1919-1936)].

Science.gov (United States)

Nozal, Raúl Rodríquez

2011-01-01

The pharmaceutical industry associations, as it happened with other businesses, had a significant rise during the dictatorship of Primo de Rivera and II Republic. The 'Cámara Nacional de Industrias Químicas', in Barcelona, represented the national chemical industry to its ultimate assimilation by the 'Organización Sindical' in 1939. In this association, matters relating to pharmaceutical products -- which we will especially deal with in this work -- were managed by the 'Unión Nacional de Laboratorios Químico-Farmacéuticos', which defended the interests of pharmaceutical companies in the presence of government authorities, using the resources and mechanisms also managed by business pressure groups. The inclusion of industrial pharmacy in the Chemical lobby separated the pharmaceutical industry from traditional exercise and its corporate environment. this created ups and downs, conflicts of interests and finally, love and hate relationships with their colleagues of the pharmacy work placement and, of course, with the association that represented them: the 'Unión Farmacéutica Nacional'.

Mini review: Recombinant production of tailored bio-pharmaceuticals in different Bacillus strains and future perspectives.

Science.gov (United States)

Lakowitz, Antonia; Godard, Thibault; Biedendieck, Rebekka; Krull, Rainer

2018-05-01

Bio-pharmaceuticals like antibodies, hormones and growth factors represent about one-fifth of commercial pharmaceuticals. Host candidates of growing interest for recombinant production of these proteins are strains of the genus Bacillus, long being established for biotechnological production of homologous and heterologous proteins. Bacillus strains benefit from development of efficient expression systems in the last decades and emerge as major industrial workhorses for recombinant proteins due to easy cultivation, non-pathogenicity and their ability to secrete recombinant proteins directly into extracellular medium allowing cost-effective downstream processing. Their broad product portfolio of pharmaceutically relevant recombinant proteins described in research include antibody fragments, growth factors, interferons and interleukins, insulin, penicillin G acylase, streptavidin and different kinases produced in various cultivation systems like microtiter plates, shake flasks and bioreactor systems in batch, fed-batch and continuous mode. To further improve production and secretion performance of Bacillus, bottlenecks and limiting factors concerning proteases, chaperones, secretion machinery or feedback mechanisms can be identified on different cell levels from genomics and transcriptomics via proteomics to metabolomics and fluxomics. For systematical identification of recurring patterns characteristic of given regulatory systems and key genetic targets, systems biology and omics-technology provide suitable and promising approaches, pushing Bacillus further towards industrial application for recombinant pharmaceutical protein production. Copyright © 2017. Published by Elsevier B.V.

Case histories in pharmaceutical risk management.

Science.gov (United States)

McCormick, Cynthia G; Henningfield, Jack E; Haddox, J David; Varughese, Sajan; Lindholm, Anders; Rosen, Susan; Wissel, Janne; Waxman, Deborah; Carter, Lawrence P; Seeger, Vickie; Johnson, Rolley E

2009-12-01

The development and implementation of programs in the U.S. to minimize risks and assess unintended consequences of new medications has been increasingly required by the Food and Drug Administration (FDA) since the mid 1990s. This paper provides four case histories of risk management and post-marketing surveillance programs utilized recently to address problems associated with possible abuse, dependence and diversion. The pharmaceutical sponsors of each of these drugs were invited to present their programs and followed a similar template for their summaries that are included in this article. The drugs and presenting companies were OxyContin, an analgesic marketed by Purdue Pharma L.P., Daytrana and Vyvanse, ADHD medications marketed by Shire Pharmaceuticals, Xyrem for narcolepsy marketed by Jazz Pharmaceuticals, and Subutex and Suboxone for opioid dependence marketed by Reckitt Benckiser Pharmaceuticals Inc. These case histories and subsequent discussions provide invaluable real-world examples and illustrate both the promise of risk management programs in providing a path to market and/or for keeping on the market drugs with serious potential risks. They also illustrate the limitations of such programs in actually controlling unintended consequences, as well as the challenge of finding the right balance of reducing risks without posing undue barriers to patient access. These experiences are highly relevant as the FDA increasingly requires pharmaceutical sponsors to develop and implement the more formalized and enforceable versions of the risk management term Risk Evaluation and Mitigation Strategies (REMS).

Pharmaceutical care in smoking cessation.

Science.gov (United States)

Marín Armero, Alicia; Calleja Hernandez, Miguel A; Perez-Vicente, Sabina; Martinez-Martinez, Fernando

2015-01-01

As a determining factor in various diseases and the leading known cause of preventable mortality and morbidity, tobacco use is the number one public health problem in developed countries. Facing this health problem requires authorities and health professionals to promote, via specific programs, health campaigns that improve patients' access to smoking cessation services. Pharmaceutical care has a number of specific characteristics that enable the pharmacist, as a health professional, to play an active role in dealing with smoking and deliver positive smoking cessation interventions. The objectives of the study were to assess the efficacy of a smoking cessation campaign carried out at a pharmaceutical care center and to evaluate the effects of pharmaceutical care on patients who decide to try to stop smoking. The methodology was an open, analytical, pre-post intervention, quasi-experimental clinical study performed with one patient cohort. The results of the study were that the promotional campaign for the smoking cessation program increased the number of patients from one to 22, and after 12 months into the study, 43.48% of the total number of patients achieved total smoking cessation. We can conclude that advertising of a smoking cessation program in a pharmacy increases the number of patients who use the pharmacy's smoking cessation services, and pharmaceutical care is an effective means of achieving smoking cessation.

[Written pharmaceutical advertising--still unreliable?].

Science.gov (United States)

Gladsø, Kristin Haugen; Garberg, Hedda Rosland; Spigset, Olav; Slørdal, Lars

2014-09-02

Marketing by the pharmaceutical industry affects doctors' prescribing habits. All pharmaceutical advertising received by nine doctors in two GP offices over a period of three months was collected. The advertising material was sorted by compound. For each compound, the advert with the highest number of references was selected. The cited references were obtained, and the claims in the adverts were assessed in terms of their consistency with the source data based on the provisions in the Norwegian regulations on pharmaceuticals. The references were also assessed with regard to the incidence of conflicts of interest among authors. The doctors received a total of 270 shipments of advertising for 46 different compounds. Altogether 95% of the 173 references cited in the 46 selected adverts could be obtained. The adverts contained a total of 156 claims. Of these, 56% were assessed as correct when compared to the source data and as having clinical relevance. Altogether 75% of the journal articles reported relevant conflicts of interest for the authors. About half the claims in the adverts were found to be correct and clinically relevant. These results concur with those from a methodologically identical study based on advertising material collected in 2004. The cited literature was of varying quality and often funded by the pharmaceutical companies. The findings indicate that the target group should be sceptical of this type of marketing.

Cost-containment as part of pharmaceutical policy

DEFF Research Database (Denmark)

Almarsdóttir, Anna Birna; Traulsen, Janine Marie

2005-01-01

and profit controls; 2) reimbursement system charges; 3) other fiscal measures; 4) quality measures. Pharmaceuticals policy has suffered from the pervasive misunderstanding that drugs are like any other commodity; resulting in policy makers viewing pharmaceuticals expenditures without thinking about drugs...

Information sources and utilization patterns of pharmaceutical ...

African Journals Online (AJOL)

The study investigated the adequacy of pharmaceutical scientists' information environment in feeding their occupational activities. Data was collected through observation and through questionnaire administration to all the twenty-seven scientists in two large pharmaceutical companies in Lagos, Nigeria. Findings revealed ...

Pharmaceutical penetration of new drug and pharmaceutical market structure in Taiwan: hospital-level prescription of thiazolidinediones for diabetes.

Science.gov (United States)

Tsai, Yi-Wen; Wen, Yu-Wen; Huang, Weng-Foung; Kuo, Ken N; Chen, Pei-Fen; Shih, Hsin-Wei; Lee, Yue-Chune

2010-06-01

This study used Taiwan's National Health Insurance claim database (years 2000-2005) to examine how thiazolidinediones (TZD), a new class of drugs for diabetes, penetrated into Taiwan's hospitals, and its association with the concentration of all diabetes drugs at the hospital level. We collected 72 monthly summaries of diabetes prescriptions from all hospitals in Taiwan. Hospital-level pharmaceutical concentration was measured by penetration of TZD, defined as monthly market share of TZD in each hospital. Concentration of diabetes drugs was measured by Herfindahl-Hirschman indices. We found a negative association (coefficient = -0.3610) between TZD penetration and concentration of diabetes drug but a positive association between penetration of TZD and the volume of prescribed diabetes drugs (coefficient = 0.4088). In conclusion, hospital characteristics and volume of services determined the concentration of pharmaceuticals at the institution level, reflecting the heterogeneous competition between pharmaceutical companies within each hospital. Institution-level pharmaceutical concentration influences the adoption and penetration of new drugs.

Rational Use of Medicines in Relation to Pharmaceutical Supply ...

African Journals Online (AJOL)

Pharmaceutical management involves a set of practices aiming at ensuring timely availability and appropriate use of safe, effective and quality pharmaceuticals and services in any health care setting. Rational use of medicines is often associated with efficiency of pharmaceutical supply system that operates in the health ...

Occurrence of Pharmaceuticals in Wastewater and Their Interaction with Shallow Aquifers: A Case Study of Horní Beřkovice, Czech Republic

Directory of Open Access Journals (Sweden)

David Rozman

2017-03-01

Full Text Available The application of innovative technologies in water management, such as wastewater reuse, requires a deeper understanding of emerging pollutants, including pharmaceuticals. This study presents a unique pilot site at Horní Beřkovice in Central Bohemia, where wastewater parameters are significantly influenced by the effluent from a local psychiatric hospital, and where the treated wastewater infiltrates into a shallow aquifer over a long period. The survey compared the quality parameters of local wastewater with those of the wastewater in four other catchments with no sources of concentrated pharmaceutical contamination. A total of 10 pharmaceuticals were detected while monitoring a common sewage system, but their number increased 3-fold at Horní Beřkovice. The water quality data revealed the effectiveness of the removal of pharmaceuticals from wastewater at the local sewage treatment plant and tracked the fate of substances that move from the treatment plant into the recharge ponds and then gradually into groundwater. The findings showed a significant decrease in all the monitored micropollutants that remained bound in sediments and in the unsaturated zone. Their passage into groundwater was highly reduced, and they virtually disappear after a few hundred meters in the saturated zone. The only exception is carbamazepine. This substance passes through the treatment technology and unsaturated zone. It systematically appears in the groundwater samples collected about 1 km from the infiltration site.

[Economic determinants of the demand for importation of pharmacochemical and pharmaceutical products].

Science.gov (United States)

Santos, Anderson Moreira Aristides Dos; Tejada, César Augusto Oviedo; Jacinto, Paulo de Andrade

2017-09-28

: This article analyzes the relationship between the demand for importation of pharmacochemical and pharmaceutical products and economic variables (exchange rate, import prices, and aggregate income) in Brazil, using monthly data from 1997-2014. The main results showed that increases in aggregate income and price reductions in imports have a positive and significant impact (elastic and inelastic, respectively) on imports. Exchange rate was only significant in the more aggregate model. Thus, aggregate income was a robust variable with strong impact on the importation of pharmacochemical and pharmaceutical products. The arguments in the literature that this industry's international trade deficit is related to a deficit in knowledge and technology and the current study's results provide evidence that as economic activity grows, there is a greater demand for this type of product. Additionally, if domestic production is insufficient, there is a need for imports, which can generate pressure on the trade deficit in the industry and contribute to Brazil's dependence on other countries.

Nanofiltration of a Landfill Leachate Containing Pharmaceutical Intermediates from Vitamin C Production

Directory of Open Access Journals (Sweden)

Tvrtko Ahel

2004-01-01

Full Text Available The main landfill of the city of Zagreb generates several hundreds of cubic meters of heavily contaminated leachate per day. The organic composition of the leachate is particularly peculiar because, besides common macromolecular humus-like dissolved organic carbon,it encompasses a number of specific compounds of pharmaceutical origin, including a suite of by-products deriving from the production of vitamin C. Since both macromolecular humic organic matter and vitamin C intermediates are rather resistant to microbial degradation, leachate treatment procedures using simple retention lagoons or conventional bioreactors are not very effective in reducing their levels before the discharge into the receiving waters. An attractive alternative is the application of membrane technology. The efficiencies of three different types of nanofilters for the purification of leachates from the Jakuševec landfill were examined. It was shown that both complex humic-like dissolved organic matter and anthropogenic compounds of pharmaceutical origin can be eliminated at high efficiencies, mostly above 90 %.

Past, present and future of pharmaceutical patents under Korea-US Trade Agreement.

Science.gov (United States)

Shin, Yoon Suk

2016-07-01

The introduction of substance patents in 1987 was viewed with apprehension as it was believed that the system would only reinforce the domination of the technology of advanced countries based on the trade agreement between Korea and the USA. However, substance patents provided the Korean pharmaceutical industry with the driving force required to develop new substances, and the Korean pharmaceutical industry has been constantly improving its research and development capability. The patent-approval linkage system was implemented according to the Korea-US Free Trade Agreement in 2015. The system comprises the following: registering the drugs in the Green List, notifying the listed patent and marketing approval holders about the application for generic marketing approval, patent holder's request for staying generic sales and first generic exclusivity. Korean generic companies are expected to have opportunities that enable them to challenge the global market by accumulating experience of designing of generic products, making patent challenges and strategically developing of new drugs or incrementally modified drugs through the linkage system.

Prioritizing veterinary pharmaceuticals for aquatic environment in Korea.

Science.gov (United States)

Kim, Younghee; Jung, Jinyong; Kim, Myunghyun; Park, Jeongim; Boxall, Alistair B A; Choi, Kyungho

2008-09-01

Pharmaceutical residues may have serious impacts on nontarget biological organisms in aquatic ecosystems, and have therefore precipitated numerous investigations worldwide. Many pharmaceutical compounds available on the market need to be prioritized based on their potential ecological and human health risks in order to develop sound management decisions. We prioritized veterinary pharmaceuticals in Korea by their usage, potential to enter the environment, and toxicological hazard. Twenty compounds were identified in the top priority class, most of which were antibiotics. Among these compounds, 8 were identified as deserving more immediate attention: amoxicillin, enramycin, fenbendazole, florfenicol, ivermectin, oxytetracycline, tylosin, and virginiamycin. A limitation of this study is that we initially screened veterinary pharmaceuticals by sales tonnage for veterinary use only. However, this is the first attempt to prioritize veterinary pharmaceuticals in Korea, and it provides important concepts for developing environmental risk management plans for such contaminants in aquatic systems. Copyright © 2008 Elsevier B.V. All rights reserved.

Ozonation for degradation of pharmaceutical in hospital wastewater

DEFF Research Database (Denmark)

Bester, Kai; Hansen, Kamilla S; Spiliotopoulou, Aikaterini

-pollutants (Antoniou et al., 2013). In the present work, ozonation of biological treated hospital wastewater spiked with pharmaceuticals were performed to determine the required ozone dose for 90 % removal of the investigated pharmaceuticals. Effluents with different DOC level were used to investigate the effect...... of DOC on the removal of the pharmaceuticals. Furthermore, the effect of pH on ozone decomposition was investigated in relevant pH range....

The behaviour of pharmaceuticals in anaerobic digester sludge

OpenAIRE

Campbell, Alison

2013-01-01

Pharmaceuticals are biologically active compounds that may be consumed in hundreds of tonnes per year, and which are excreted into municipal sewerage systems. Many pharmaceuticals persist during sewage treatment, and significant environmental risk has been linked to incomplete removal of pharmaceuticals. Evaluation of this risk is important and should be as representative as possible, taking into consideration all significant exposure routes and removal processes. Sludge treatment processes a...

ASTM and ASME-BPE Standards--Complying with the Needs of the Pharmaceutical Industry.

Science.gov (United States)

Huitt, William M

2011-01-01

standards and then modifying them in order to meet the more stringent requirements of the Food and Drug Administration (FDA). In 1997 the American Society of Mechanical Engineers (ASME) published the first Bioprocessing Equipment (BPE) Standard. In its initial development and ongoing maintenance it works with other American National Standards developers to harmonize the many standards associated with the design, engineering, and construction of bioprocessing facilities. This harmonization effort has established a comprehensive set of standards for the betterment of the pharmaceutical industry at large. This effort is, and will remain, very important as technology, along with new and improved product and processes, evolve into the future.

Occurrence, sources, and fate of pharmaceuticals in aquatic environment and soil

International Nuclear Information System (INIS)

Li, W.C.

2014-01-01

With the rapid economic development, a better living condition leads to longer life expectancy, which increased the total population, in particular the elderly group. It may result in increase in the demand of pharmaceuticals for people in domestic use or in hospital. Although most sewage treatment plants or waste water treatment plantsmet the regulatory requirement, there are still many pharmaceuticals removed incompletely and thus discharged to the environment. Therefore, the pharmaceuticals residue draws the public concern because they might cause adverse effects on the organism even human beings. Recently, many studies have published on the source and occurrence as well as the fate of pharmaceuticals all over the world. This paper summarized and reviewed the recent studies on the sources, occurrence, fate and the effects of the most common pharmaceuticals. Finally, it gave the suggestion and risk management for controlling the pharmaceuticals. - Highlights: • The sources of pharmaceutical residuals are studied. • Occurrence and fate of pharmaceutical in environment are studied. • Risk management and recommendation are provided on pharmaceutical pollution. - Concentration of pharmaceuticals in the natural environment is lower than in effluent of sewage treatment plants in which carbamazepine is found frequently in soil and water body

Synthetic biology advances for pharmaceutical production

Science.gov (United States)

Breitling, Rainer; Takano, Eriko

2015-01-01

Synthetic biology enables a new generation of microbial engineering for the biotechnological production of pharmaceuticals and other high-value chemicals. This review presents an overview of recent advances in the field, describing new computational and experimental tools for the discovery, optimization and production of bioactive molecules, and outlining progress towards the application of these tools to pharmaceutical production systems. PMID:25744872

Microbial Evaluation of Some Non-sterile Pharmaceutical ...

African Journals Online (AJOL)

Purpose: To determine the type and incidence of predominant microorganisms in certain non-sterile pharmaceuticals immediately after collection and one year later. Methods: All pharmaceutical samples were subjected to the following examinations: total bacterial count and presence of microbial pathogens, using ...

Information flow in the pharmaceutical supply chain.

Science.gov (United States)

Yousefi, Nazila; Alibabaei, Ahmad

2015-01-01

Managing the supply chain plays an important role in creating competitive advantages for companies. Adequate information flow in supply chain is one of the most important issues in SCM. Therefore, using certain Information Systems can have a significant role in managing and integrating data and information within the supply chain. Pharmaceutical supply chain is more complex than many other supply chains, in the sense that it can affect social and political perspectives. On the other hand, managing the pharmaceutical supply chain is difficult because of its complexity and also government regulations in this field. Although, Iran has progressed a lot in pharmaceutical manufacturing, still there are many unsolved issues in managing the information flow in the pharmaceutical supply chain. In this study, we reviewed the benefits of using different levels of an integrated information system in the supply chain and the possible challenges ahead.

Pharmaceutical marketing research and the prescribing physician.

Science.gov (United States)

Greene, Jeremy A

2007-05-15

Surveillance of physicians' prescribing patterns and the accumulation and sale of these data for pharmaceutical marketing are currently the subjects of legislation in several states and action by state and national medical associations. Contrary to common perception, the growth of the health care information organization industry has not been limited to the past decade but has been building slowly over the past 50 years, beginning in the 1940s when growth in the prescription drug market fueled industry interest in understanding and influencing prescribing patterns. The development of this surveillance system was not simply imposed on the medical profession by the pharmaceutical industry but was developed through the interactions of pharmaceutical salesmen, pharmaceutical marketers, academic researchers, individual physicians, and physician organizations. Examination of the role of physicians and physician organizations in the development of prescriber profiling is directly relevant to the contemporary policy debate surrounding this issue.

Funding pharmaceutical innovation through direct tax credits.

Science.gov (United States)

Lybecker, Kristina M; Freeman, Robert A

2007-07-01

Rising pharmaceutical prices, increasing demand for more effective innovative drugs and growing public outrage have heightened criticism of the pharmaceutical industry. The public debate has focused on drug prices and access. As a consequence, the patent system is being reexamined as an efficient mechanism for encouraging pharmaceutical innovation and drug development. We propose an alternative to the existing patent system, instead rewarding the innovating firm with direct tax credits in exchange for marginal cost pricing. This concept is based on the fundamental assumption that innovation that benefits society at large may be financed publicly. As an industry which produces a social good characterized by high fixed costs, high information and regulatory costs, and relatively low marginal costs of production, pharmaceuticals are well-suited to such a mechanism. Under this proposal, drug prices fall, consumer surplus increases, access is enhanced, and the incentives to innovate are preserved.

Microbiological testing of pharmaceuticals and cosmetics in Egypt.

Science.gov (United States)

Zeitoun, Hend; Kassem, Mervat; Raafat, Dina; AbouShlieb, Hamida; Fanaki, Nourhan

2015-12-09

Microbial contamination of pharmaceuticals poses a great problem to the pharmaceutical manufacturing process, especially from a medical as well as an economic point of view. Depending upon the product and its intended use, the identification of isolates should not merely be limited to the United States Pharmacopeia (USP) indicator organisms. Eighty-five pre-used non-sterile pharmaceuticals collected from random consumers in Egypt were examined for the eventual presence of bacterial contaminants. Forty-one bacterial contaminants were isolated from 31 of the tested preparations. These isolates were subjected to biochemical identification by both conventional tests as well as API kits, which were sufficient for the accurate identification of only 11 out of the 41 bacterial contaminants (26.8%) to the species level. The remaining isolates were inconclusively identified or showed contradictory results after using both biochemical methods. Using molecular methods, 24 isolates (58.5%) were successfully identified to the species level. Moreover, polymerase chain reaction (PCR) assays were compared to standard biochemical methods in the detection of pharmacopoeial bacterial indicators in artificially-contaminated pharmaceutical samples. PCR-based methods proved to be superior regarding speed, cost-effectiveness and sensitivity. Therefore, pharmaceutical manufacturers would be advised to adopt PCR-based methods in the microbiological quality testing of pharmaceuticals in the future.

ORIGINS AND RAMIFICATIONS OF PHARMACEUTICALS & ...

Science.gov (United States)

There is no abstract available for this product. If further information is requested, please refer to the bibliographic citation and contact the person listed under Contact field. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and more in-depth coverage of each project. Briefly, each project's objective is stated below.Subtask 1: To integrate state-of-the-art technologies (polar organic chemical integrative samplers, advanced solid-phase extraction methodologies with liquid chromatography/electrospray/mass spectrometry) and apply them to studying the sources and fate of a select list of PPCPs. Application and improvement of analytical methodologies that can detect non-volatile, polar, water-soluble pharmaceuticals in source waters at levels that could be environmentally significant (at concentrations less than parts per billion, ppb). IAG with USGS ends in FY05. APM 20 due in FY05.Subtask 2: Coordination of interagency research and public outreach activities for PPCPs. Participate on NSTC Health and Environment subcommittee working group on PPCPs. Web site maintenance and expansion, invited technical presentations, invited articles for peer-reviewed journals, interviews for media, responding to public inquiries. S

Process analytical technology (PAT) for biopharmaceuticals

DEFF Research Database (Denmark)

Glassey, Jarka; Gernaey, Krist; Clemens, Christoph

2011-01-01

Process analytical technology (PAT), the regulatory initiative for building in quality to pharmaceutical manufacturing, has a great potential for improving biopharmaceutical production. The recommended analytical tools for building in quality, multivariate data analysis, mechanistic modeling, novel...

Global risk of pharmaceutical contamination from highly populated developing countries.

Science.gov (United States)

Rehman, Muhammad Saif Ur; Rashid, Naim; Ashfaq, Muhammad; Saif, Ameena; Ahmad, Nasir; Han, Jong-In

2015-11-01

Global pharmaceutical industry has relocated from the west to Asian countries to ensure competitive advantage. This industrial relocation has posed serious threats to the environment. The present study was carried out to assess the possible pharmaceutical contamination in the environment of emerging pharmaceutical manufacturing countries (Bangladesh, China, India and Pakistan). Although these countries have made tremendous progress in the pharmaceutical sector but most of their industrial units discharge wastewater into domestic sewage network without any treatment. The application of untreated wastewater (industrial and domestic) and biosolids (sewage sludge and manure) in agriculture causes the contamination of surface water, soil, groundwater, and the entire food web with pharmaceutical compounds (PCs), their metabolites and transformed products (TPs), and multidrug resistant microbes. This pharmaceutical contamination in Asian countries poses global risks via product export and international traveling. Several prospective research hypotheses including the development of new analytical methods to monitor these PCs/TPs and their metabolites, highly resistant microbial strains, and mixture toxicity as a consequence of pharmaceutical contamination in these emerging pharmaceutical exporters have also been proposed based on the available literature. Copyright © 2013 Elsevier Ltd. All rights reserved.

Control systems engineering in continuous pharmaceutical manufacturing. May 20-21, 2014 Continuous Manufacturing Symposium.

Science.gov (United States)

Myerson, Allan S; Krumme, Markus; Nasr, Moheb; Thomas, Hayden; Braatz, Richard D

2015-03-01

This white paper provides a perspective of the challenges, research needs, and future directions for control systems engineering in continuous pharmaceutical processing. The main motivation for writing this paper is to facilitate the development and deployment of control systems technologies so as to ensure quality of the drug product. Although the main focus is on small-molecule pharmaceutical products, most of the same statements apply to biological drug products. An introduction to continuous manufacturing and control systems is followed by a discussion of the current status and technical needs in process monitoring and control, systems integration, and risk analysis. Some key points are that: (1) the desired objective in continuous manufacturing should be the satisfaction of all critical quality attributes (CQAs), not for all variables to operate at steady-state values; (2) the design of start-up and shutdown procedures can significantly affect the economic operation of a continuous manufacturing process; (3) the traceability of material as it moves through the manufacturing facility is an important consideration that can at least in part be addressed using residence time distributions; and (4) the control systems technologies must assure quality in the presence of disturbances, dynamics, uncertainties, nonlinearities, and constraints. Direct measurement, first-principles and empirical model-based predictions, and design space approaches are described for ensuring that CQA specifications are met. Ways are discussed for universities, regulatory bodies, and industry to facilitate working around or through barriers to the development of control systems engineering technologies for continuous drug manufacturing. Industry and regulatory bodies should work with federal agencies to create federal funding mechanisms to attract faculty to this area. Universities should hire faculty interested in developing first-principles models and control systems technologies for

Pharmaceutical pricing and reimbursement in China: When the whole is less than the sum of its parts.

Science.gov (United States)

Hu, Jia; Mossialos, Elias

2016-05-01

In recent years, there has been rapid growth in pharmaceutical spending in China. In addition, the country faces many challenges with regards to the quality, pricing and affordability of drugs. Pricing and reimbursement are important aspects of pharmaceutical policy that must be prioritised in order to address the many challenges. This review draws on multiple sources of information. A review of the academic and grey literature along with official government statistics were combined with information from seminars held by China's State Council Development Research Center to provide an overview of pharmaceutical pricing and reimbursement in China. Pricing and reimbursement policy were analysed through a framework that incorporates supply-side policies, proxy-demand policies and demand-side policies. China's current pharmaceutical policies interact in such a way to create dysfunction in the form of high prices, low drug quality, irrational prescribing and problems with access. Finally, the country's fragmented regulatory environment hampers pharmaceutical policy reform. The pricing and reimbursement policy landscape can be improved through higher drug quality standards, greater market concentration, an increase in government subsidies, quality-oriented tendering, wider implementation of the zero mark-up policy, through linking reimbursement with rational prescribing, and the promotion of health technology assessment and comparative effectiveness research. Addressing broader issues of regulatory fragmentation, the lack of transparency and corruption will help ensure that policies are created in a coherent, evidence-based fashion. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Microbiological testing of pharmaceuticals and cosmetics in Egypt

OpenAIRE

Zeitoun, Hend; Kassem, Mervat; Raafat, Dina; AbouShlieb, Hamida; Fanaki, Nourhan

2015-01-01

Background Microbial contamination of pharmaceuticals poses a great problem to the pharmaceutical manufacturing process, especially from a medical as well as an economic point of view. Depending upon the product and its intended use, the identification of isolates should not merely be limited to the United States Pharmacopeia (USP) indicator organisms. Results Eighty-five pre-used non-sterile pharmaceuticals collected from random consumers in Egypt were examined for the eventual presence of b...

FACTORS AFFECTING EMPLOYEE JOB SATISFACTION OF PHARMACEUTICAL SECTOR

OpenAIRE

Mosammod Mahamuda Parvin; M M Nurul Kabir

2011-01-01

The Pharmaceutical sector plays a vital role in underpinning the economic development of a country. This study attempts to evaluate job satisfaction of employees in different pharmaceutical companies. It focuses on the relative importance of job satisfaction factors and their impacts on the overall job satisfaction of employees. It also investigates the impacts of pharmaceutical type, work experience, age, and sex differences on the attitudes toward job Satisfaction. The result shows that sal...

Metrology in Pharmaceutical Industry - A Case Study

International Nuclear Information System (INIS)

Yuvamoto, Priscila D.; Fermam, Ricardo K. S.; Nascimento, Elizabeth S.

2016-01-01

Metrology is recognized by improving production process, increasing the productivity, giving more reliability to the measurements and consequently, it impacts in the economy of a country. Pharmaceutical area developed GMP (Good Manufacture Practice) requeriments, with no introduction of metrological concepts. However, due to Nanomedicines, it is expected this approach and the consequent positive results. The aim of this work is to verify the level of metrology implementation in a Brazilian pharmaceutical industry, using a case study. The purpose is a better mutual comprehension by both areas, acting together and governmental support to robustness of Brazilian pharmaceutical area. (paper)

Pharmaceuticals as indictors of sewage-influenced groundwater

Science.gov (United States)

Müller, Beate; Scheytt, Traugott; Asbrand, Martin; de Casas, Andrea Mross

2012-09-01

A set of human pharmaceuticals enables identification of groundwater that is influenced by sewage and provides information on the time of recharge. As the consumption rates of the investigated pharmaceuticals have changed over time, so too has the composition of the sewage. At the study area, south of Berlin (Germany), irrigation was performed as a method of wastewater clean-up at sewage irrigation farms until the early 1990s. Today, treated wastewater is discharged into the surface-water-stream Nuthegraben. Groundwater and surface-water samples were analyzed for the pharmaceutical substances clofibric acid, bezafibrate, diclofenac, carbamazepine and primidone, the main ions and organic carbon. The pharmaceutical substances were detected at concentrations up to microgram-per-liter level in groundwater and surface-water samples from the Nuthegraben Lowland area and from the former irrigation farms. Concentrations detected in groundwater are generally much lower than in surface water and there is significant variation in the distribution of pharmaceutical concentrations in groundwater. Groundwater influenced by the irrigation of sewage water shows higher primidone and clofibric-acid concentrations. Groundwater influenced by recent discharge of treated sewage water into the surface water shows high carbamazepine concentrations while concentrations of primidone and clofibric acid are low.

Tropical Journal of Pharmaceutical Research: About this journal

African Journals Online (AJOL)

Tropical Journal of Pharmaceutical Research: About this journal. Journal Home > Tropical Journal of Pharmaceutical Research: About this journal. Log in or Register to get access to full text downloads.

Nigerian Journal of Pharmaceutical Research: About this journal

African Journals Online (AJOL)

Nigerian Journal of Pharmaceutical Research: About this journal. Journal Home > Nigerian Journal of Pharmaceutical Research: About this journal. Log in or Register to get access to full text downloads.

Cell-Based Veterinary Pharmaceuticals – Basic Legal Parameters Set by the Veterinary Pharmaceutical Law and the Genetic Engineering Law of the European Union

Science.gov (United States)

Faltus, Timo; Brehm, Walter

2016-01-01

Cell-based therapies have been in use in veterinary medicine for years. However, the legal requirement of manufacturing, placing on the market and use of cell-based veterinary pharmaceuticals are not as well developed as the respective requirements of chemical pharmaceuticals. Cell-based veterinary pharmaceuticals are medicinal products in the sense of the pharmaceutical law of the European Union (EU). For that reason, such medicinal products principally require official approval for their manufacture and an official marketing authorization for their placement on the market before being used by the veterinarian. The manufacture, placing on the market, and use of cell-based veterinary pharmaceuticals without manufacturing approval and marketing authorization is permitted only in certain exceptional cases determined by EU and individual Member State law. Violations of this requirement may have consequences for the respective veterinarian under criminal law and under the code of professional conduct in the respective Member State. The regular use of cell-based veterinary pharmaceuticals within the scope of a therapeutic emergency as well as the import of such veterinary pharmaceuticals from non-European countries for use in the EU are currently out of the question in the EU because of a lack of legal bases. Here, we review the general legal requirement of manufacturing, placing on the market, and use of cell-based veterinary pharmaceuticals within the EU and point out different implementations of EU law within the different Member States. PMID:27965965

Pharmacoligaclly Active: Clinical Trials and the Pharmaceuticals ...

African Journals Online (AJOL)

Multinational pharmaceutical companies ('pharmas') import and produce pharmaceuticals and also conduct clinical trials which are an important aspect of research and development (R&D). This may raise the question: Is South Africa a guinea pig for the pharmas? The Department of Trade and Industry National Industrial ...

Pharmaceutical crystallography: is there a devil in the details?

DEFF Research Database (Denmark)

Bond, A. D.

2012-01-01

Modern instruments for small-molecule crystallography continue to become more sophisticated and more automated. This technical progress provides a basis for frontier research in chemical and pharmaceutical crystallography, but it also encourages analytical crystallographers to become more...... are presented for pharmaceutical compounds, and the potential importance of the "details" in pharmaceutical crystallography is discussed....

Effects of soil properties on the uptake of pharmaceuticals into earthworms

International Nuclear Information System (INIS)

Carter, Laura J.; Ryan, Jim J.; Boxall, Alistair B.A.

2016-01-01

Pharmaceuticals can enter the soil environment when animal slurries and sewage sludge are applied to land as a fertiliser or during irrigation with contaminated water. These pharmaceuticals may then be taken up by soil organisms possibly resulting in toxic effects and/or exposure of organisms higher up the food chain. This study investigated the influence of soil properties on the uptake and depuration of pharmaceuticals (carbamazepine, diclofenac, fluoxetine and orlistat) in the earthworm Eisenia fetida. The uptake and accumulation of pharmaceuticals into E. fetida changed depending on soil type. Orlistat exhibited the highest pore water based bioconcentration factors (BCFs) and displayed the largest differences between soil types with BCFs ranging between 30.5 and 115.9. For carbamazepine, diclofenac and fluoxetine BCFs ranged between 1.1 and 1.6, 7.0 and 69.6 and 14.1 and 20.4 respectively. Additional analysis demonstrated that in certain treatments the presence of these chemicals in the soil matrices changed the soil pH over time, with a statistically significant pH difference to control samples. The internal pH of E. fetida also changed as a result of incubation in pharmaceutically spiked soil, in comparison to the control earthworms. These results demonstrate that a combination of soil properties and pharmaceutical physico-chemical properties are important in terms of predicting pharmaceutical uptake in terrestrial systems and that pharmaceuticals can modify soil and internal earthworm chemistry which may hold wider implications for risk assessment. - Highlights: • Uptake of pharmaceuticals into earthworms is influenced by soil parameters. • Presence of pharmaceuticals in the terrestrial environment influences soil pH. • Uptake of pharmaceuticals by earthworms changes internal earthworm pH. - The uptake of pharmaceuticals into soil invertebrates is dependent on the complex interplay between pharmaceutical physico-chemical properties and soil

Pharmaceutical care: the PCNE definition 2013.

Science.gov (United States)

Allemann, Samuel S; van Mil, J W Foppe; Botermann, Lea; Berger, Karin; Griese, Nina; Hersberger, Kurt E

2014-06-01

Twenty-three years after Hepler and Strand published their well-known definition of Pharmaceutical Care (PhC), confusion remains about what the term includes and how to differentiate it from other terms. The board of the Pharmaceutical Care Network Europe (PCNE) felt the need to redefine PhC and to answer the question: "What is Pharmaceutical Care in 2013". The aims of this paper were to review existing definitions of PhC and to describe the process of developing a redefined definition. A literature search was conducted in the MEDLINE database (1964-January 2013). Keywords included "Pharmaceutical Care", "Medication (Therapy) Management", "Medicine Management", and "Pharmacist Care" in the title or abstract together with the term "defin*". To ease comparison between definitions, we developed a standardised syntax to paraphrase the definitions. During a dedicated meeting, a moderated discussion about the definition of PhC was organised. The initial literature search produced 186 hits, with eight unique PhC definitions. Hand searching identified a further 11 unique definitions. These 19 definitions were paraphrased using the standardised syntax (provider, recipient, subject, outcome, activities). Fourteen members of PCNE and 10 additional experts attended the moderated discussion. Working groups of increasing size developed intermediate definitions, which had similarities and differences to those retrieved in the literature search. At the end of the session, participants reached a consensus on a "PCNE definition of Pharmaceutical Care" reading: "Pharmaceutical Care is the pharmacist's contribution to the care of individuals in order to optimize medicines use and improve health outcomes". It was possible to paraphrase definitions of PhC using a standardised syntax focusing on the provider, recipient, subject, outcomes, and activities included in PhC practice. During a one-day workshop, experts in PhC research agreed on a definition, intended to be applicable for the

Mergers and innovation in the pharmaceutical industry.

Science.gov (United States)

Comanor, William S; Scherer, F M

2013-01-01

Conflicting trends confound the pharmaceutical industry. The productivity of pharmaceutical innovation has declined in recent years. At the same time, the cohort of large companies who are the leading engines of pharmaceutical R&D has become increasingly concentrated. The concurrent presence of these trends is not sufficient to determine causation. In response to lagging innovation prospects, some companies have sought refuge in mergers and acquisitions to disguise their dwindling prospects or gain R&D synergies. On the other hand, the increased concentration brought on by recent mergers may have contributed to the declining rate of innovation. In this paper, we consider the second of these causal relationships: the likely impact of the recent merger wave among the largest pharmaceutical companies on the rate of innovation. In other words, have recent mergers, which may have been taken in response to lagging innovation, represented a self-defeating strategy that only made industry outcomes worse? Copyright © 2012 Elsevier B.V. All rights reserved.

Financing pharmaceuticals in transition economies.

Science.gov (United States)

Kanavos, P

1999-06-01

This paper (a) provides a methodological taxonomy of pricing, financing, reimbursement, and cost containment methodologies for pharmaceuticals; (b) analyzes complex agency relationships and the health versus industrial policy tradeoff; (c) pinpoints financing measures to balance safety and effectiveness of medicines and their affordability by publicly funded systems in transition; and (d) highlights viable options for policy-makers for the financing of pharmaceuticals in transition. Three categories of measures and their implications for pharmaceutical policy cost containing are analyzed: supply-side measures, targeting manufacturers, proxy demand-side measures, targeting physicians and pharmacists, and demand-side measures, targeting patients. In pursuing supply side measures, we explore free pricing for pharmaceuticals, direct price controls, cost-plus and cost pricing, average pricing and international price comparisons, profit control, reference pricing, the introduction of a fourth hurdle, positive and negative lists, and other price control measures. The analysis of proxy-demand measures includes budgets for physicians, generic policies, practice guidelines, monitoring the authorizing behavior of physicians, and disease management schemes. Demand-side measures explore the effectiveness of patient co-payments, the impact of allowing products over-the-counter and health promotion programs. Global policies should operate simultaneously on the supply, the proxy demand, and the demand-side. Policy-making needs to have a continuous long-term planning. The importation of policies into transition economy may require extensive and expensive adaptation, and/or lead to sub-optimal policy outcomes.

On radiation treatment of pharmaceutical products

International Nuclear Information System (INIS)

Zukov, V.; Mende, V.

1976-01-01

The progress made in the GDR over the past decade in the field of radiosterilization of products of the medical industry, has naturally raised the question of radiosterilization in pharmaceutics. However, because of the diversity and complicated nature of pharmaceutical products and, consequently, longer periods of time required for preliminary studies, their radiosterilization has not yet been applied on an industrial scale, in contrast to the situation in the medical industry. The studies carried out so far have been mainly concerned with ascertaining the permissibility and effectiveness of radiosterilization of individual products under particular conditions rather than with laying down a broad theoretical basis. Accordingly, the present paper does not describe results of special studies but presents a brief rewiev of some studies on radiation treatment of pharmaceutical products undertaken in the GDR. (author)

Pharmaceutical cocrystals, salts and polymorphs: Advanced characterization techniques.

Science.gov (United States)

Pindelska, Edyta; Sokal, Agnieszka; Kolodziejski, Waclaw

2017-08-01

The main goal of a novel drug development is to obtain it with optimal physiochemical, pharmaceutical and biological properties. Pharmaceutical companies and scientists modify active pharmaceutical ingredients (APIs), which often are cocrystals, salts or carefully selected polymorphs, to improve the properties of a parent drug. To find the best form of a drug, various advanced characterization methods should be used. In this review, we have described such analytical methods, dedicated to solid drug forms. Thus, diffraction, spectroscopic, thermal and also pharmaceutical characterization methods are discussed. They all are necessary to study a solid API in its intrinsic complexity from bulk down to the molecular level, gain information on its structure, properties, purity and possible transformations, and make the characterization efficient, comprehensive and complete. Furthermore, these methods can be used to monitor and investigate physical processes, involved in the drug development, in situ and in real time. The main aim of this paper is to gather information on the current advancements in the analytical methods and highlight their pharmaceutical relevance. Copyright © 2017 Elsevier B.V. All rights reserved.

Advances in solid dosage form manufacturing technology.

Science.gov (United States)

Andrews, Gavin P

2007-12-15

Currently, the pharmaceutical and healthcare industries are moving through a period of unparalleled change. Major multinational pharmaceutical companies are restructuring, consolidating, merging and more importantly critically assessing their competitiveness to ensure constant growth in an ever-more demanding market where the cost of developing novel products is continuously increasing. The pharmaceutical manufacturing processes currently in existence for the production of solid oral dosage forms are associated with significant disadvantages and in many instances provide many processing problems. Therefore, it is well accepted that there is an increasing need for alternative processes to dramatically improve powder processing, and more importantly to ensure that acceptable, reproducible solid dosage forms can be manufactured. Consequently, pharmaceutical companies are beginning to invest in innovative processes capable of producing solid dosage forms that better meet the needs of the patient while providing efficient manufacturing operations. This article discusses two emerging solid dosage form manufacturing technologies, namely hot-melt extrusion and fluidized hot-melt granulation.

Incorporating Natural Products, Pharmaceutical Drugs, Self-Care and Digital/Mobile Health Technologies into Molecular-Behavioral Combination Therapies for Chronic Diseases

Science.gov (United States)

Bulaj, Grzegorz; Ahern, Margaret M.; Kuhn, Alexis; Judkins, Zachary S.; Bowen, Randy C.; Chen, Yizhe

2016-01-01

Merging pharmaceutical and digital (mobile health, mHealth) ingredients to create new therapies for chronic diseases offers unique opportunities for natural products such as omega-3 polyunsaturated fatty acids (n-3 PUFA), curcumin, resveratrol, theanine, or α-lipoic acid. These compounds, when combined with pharmaceutical drugs, show improved efficacy and safety in preclinical and clinical studies of epilepsy, neuropathic pain, osteoarthritis, depression, schizophrenia, diabetes and cancer. Their additional clinical benefits include reducing levels of TNFα and other inflammatory cytokines. We describe how pleiotropic natural products can be developed as bioactive incentives within the network pharmacology together with pharmaceutical drugs and self-care interventions. Since approximately 50% of chronically-ill patients do not take pharmaceutical drugs as prescribed, psychobehavioral incentives may appeal to patients at risk for medication non-adherence. For epilepsy, the incentive-based network therapy comprises anticonvulsant drugs, antiseizure natural products (n-3 PUFA, curcumin or/and resveratrol) coupled with disease-specific behavioral interventions delivered by mobile medical apps. The add-on combination of antiseizure natural products and mHealth supports patient empowerment and intrinsic motivation by having a choice in self-care behaviors. The incentivized therapies offer opportunities: (1) to improve clinical efficacy and safety of existing drugs, (2) to catalyze patient-centered, disease self-management and behavior-changing habits, also improving health-related quality-of-life after reaching remission, and (3) merging copyrighted mHealth software with natural products, thus establishing an intellectual property protection of medical treatments comprising the natural products existing in public domain and currently promoted as dietary supplements. Taken together, clinical research on synergies between existing drugs and pleiotropic natural products

Approaches to education of pharmaceutical biotechnology in faculties of pharmacy.

Science.gov (United States)

Calis, S; Oner, F; Kas, S; Hincal, A A

2001-06-01

Pharmaceutical biotechnology is developing rapidly both in academic institutions and in the biopharmaceutical industry. For this reason, FIP Special Interest Group of Pharmaceutical Biotechnology decided to develop a questionnaire concerning pharmaceutical biotechnology education. After preliminary studies were completed, questionnaires were sent to the leading scientists in academia and research directors or senior managers of various Pharmaceutical Biotechnology Companies in order to gather their views about how to create a satisfactory program. The objectives of this study were as follows: -To review all of the graduate and undergraduate courses which are presently available worldwide on pharmaceutical biotechnology in Faculties of Pharmacy. -To review all of the text books, references and scientific sources available worldwide in the area of pharmaceutical biotechnology. When replying to the questionnaires, the respondents were asked to consider the present status of pharmaceutical biotechnology education in academia and future learning needs in collaboration with the biotechnology industry. The data from various pharmacy faculties and biotechnology industry representatives from Asia, Europe and America were evaluated and the outcome of the survey showed that educational efforts in training qualified staff in the rapidly growing field of pharmaceutical biotechnology is promising. Part of the results of this questionnaire study have already been presented at the 57th International Congress of FIP Vancouver, Canada in 1997.

The pharmaceutical quality revolution

Directory of Open Access Journals (Sweden)

Jordi Botet

2016-01-01

Full Text Available Pharmaceutical products are patient-oriented. If they had a deficient quality they might put live at risk. Ensuring their quality is not, however, a straightforward task and this is why different approaches have been used along the way. This article analyzes them and shows how our present approach, if well implemented, is very effective in ensuring quality.Methods. This article analyzes the current pharmaceutical quality system as described by international guidances in the light of practical experience gathered by the author as an international GMP-consultant.Result. Nowadays we have come to understand that as quality is a global concept in terms of time and of requirements, it has to be assured in a global way too. This is why quality assurance is a permanent process that starts during the development of a product and goes on during its manufacturing life. Manufacturing should be performed within a pharmaceutical quality system which ensures GMP compliance. Decisions should be science and risk-based. Products and processes are monitored by means of critical variables.Conclusions. The approach followed in the 21st century for ensuring quality is very effective and allows for a progressive reduction of the level of quality risk. However, this quality system is either comprehensive or there is no quality

influence of manufacturing practices on quality of pharmaceutical

African Journals Online (AJOL)

hi-tech

2004-06-01

Jun 1, 2004 ... PHARMACEUTICAL PRODUCTS MANUFACTURED IN KENYA. J. A. ORWA, L. K. ... Design: Cross-sectional study. ... of good manufacturing practices has been used in the production of each pharmaceutical product by ...

Radiation sterilization of pharmaceuticals and biomedical products

International Nuclear Information System (INIS)

Blackburn, R.; Iddon, B.; Moore, J.S.; Phillips, G.O.; Power, D.M.; Woodward, T.W.

1975-01-01

Sterilization of pharmaceuticals by radiation is accompanied by chemical degradation which must be eliminated or minimised if the method is to be successfully applied. In order to devise ways in which the pharmaceutical can be protected it is necessary to know the yield and nature of the decomposition products, the mechanisms by which degradation occurs, and the rate constants for the reactions involved. We have obtained such data for a variety of pharmaceutical compounds, viz. vitamin B12, benzyl penicillin, sulphonamides, indoles, heparin, alginates and phenylmercurics, both in the solid state and in aqueous solution. The scope and limitations of radiation sterilization are discussed in the light of these results. (author)

Decomposition of persistent pharmaceuticals in wastewater by ionizing radiation

International Nuclear Information System (INIS)

Kimura, Atsushi; Osawa, Misako; Taguchi, Mitsumasa

2012-01-01

Pharmaceuticals in wastewater were treated by the combined method of activated sludge and ionizing radiation in laboratory scale. Oseltamivir, aspirin, and ibuprofen at 5 μmol dm −3 in wastewater were decomposed by the activated sludge at reaction time for 4 h. Carbamazepine, ketoprofen, mefenamic acid, clofibric acid, and diclofenac were not biodegraded completely, but were eliminated by γ-ray irradiation at 2 kGy. The rate constants of the reactions of these pharmaceuticals with hydroxyl radicals were estimated by the competition reaction method to be 4.0–10×10 9 mol −1 dm 3 s −1 . Decompositions of the pharmaceuticals in wastewater by ionizing radiation were simulated by use of the rate constants and the amount of total organic carbon as parameters. Simulation curves of concentrations of these pharmaceuticals as a function of dose described the experimental data, and the required dose for the elimination of them in wastewater by ionizing radiation can be estimated by this simulation. - Highlights: ► We treat pharmaceuticals in wastewater by activated sludge and ionizing radiation. ► Activated sludge decreases the amounts of total organic carbons in wastewater. ► Pharmaceuticals were decomposed by γ-ray irradiation at 2 kGy. ► We construct simulation for treatment of pharmaceuticals by ionizing radiation.

The pharmaceutical sector inquiry: 'Hamlet' in a nutshell.

Science.gov (United States)

den Exter, André

2010-03-01

In July 2009, the European Commission (DG Competition) published a Communication on the pharmaceutical sector. This inquiry was launched because there were some indications that competition in the pharmaceutical market in the European Union might not be working well. The report examines the reasons for the observed delay. This article analyses the outcomes from a critical standpoint, arguing in favour of enhanced 'soft law' accountability mechanisms in the pharmaceutical sector, defending conditional patenting and the introduction of a Community patent.

Polymers in life sciences: Pharmaceutical and biomedical applications

Science.gov (United States)

Barba, Anna Angela; Dalmoro, Annalisa; d'Amore, Matteo; Lamberti, Gaetano; Cascone, Sara; Titomanlio, Giuseppe

2015-12-01

This paper deals with the work done by prof. Titomanlio and his group in the fields of pharmaceutical and biomedical applications of polymers. In particular, the main topics covered are: i) controlled drug release from pharmaceuticals based on hydrogel for oral delivery of drugs; ii) production and characterization of micro and nanoparticles based on stimuli-responsive polymers; iii) use of polymers for coronary stent gel-paving; iv) design and realization of novel methods (in-vitro and in-silico) to test polymer-based pharmaceuticals.

Pharmaceutical supply chain models: A synthesis from a systems view of operations research

Directory of Open Access Journals (Sweden)

Ettore Settanni

Full Text Available This research evaluates reconfiguration opportunities in Pharmaceutical Supply Chains (PSC resulting from technology interventions in manufacturing, and new, more patient-centric delivery models. A critical synthesis of the academic and practice literature is used to identify, conceptualise, analyse and categorise PSC models. From a theoretical perspective, a systems view of operations research is adopted to provide insights on a broader range of OR activities, from conceptual to mathematical modelling and model solving, up to implementation.The research demonstrates that: 1 current definitions of the PSC are largely production-centric and fail to capture patient consumption, and hence healthcare outcomes; 2 most PSC mathematical models lack adequate conceptualisation of the structure and behaviour of the supply chain, and the boundary conditions that need to be considered for a given problem; 3 models do not adequately specify current unit operations or future production technology options, and are therefore unable to address the critical questions around alternative product or process technologies; 4 economic evaluations are limited to direct costing, rather than systemic approaches such as supply chain costing and total cost of ownership.While current models of the PSC may help with the optimisation of specific unit operations, their theoretical benefits could be offset by the dynamics of complex upstream (supply and downstream (distribution and healthcare delivery systems. To overcome these limitations, this research provides initial directions towards an integrated systems approach to PSC modelling. This perspective involves problem conceptualisation and boundary definition; design, formulation and solution of mathematical models, through to practical implementation of identified solutions. For both academics and practitioners, research findings suggest a systems approach to PSC modelling can provide improved conceptualisation and

Drivers of peak sales for pharmaceutical brands

NARCIS (Netherlands)

Fischer, Marc; Leeflang, Peter S. H.; Verhoef, Peter C.

2010-01-01

Peak sales are an important metric in the pharmaceutical industry. Specifically, managers are focused on the height-of-peak-sales and the time required achieving peak sales. We analyze how order of entry and quality affect the level of peak sales and the time-to-peak-sales of pharmaceutical brands.

Organizing Global IS Management to Meet Competitive Challenges: Experiences from the Pharmaceutical Industry

OpenAIRE

Bettina Schwarzer

1995-01-01

Despite the widely acknowledged importance information technology plays in multinational corporations, many companies lack an understanding of when and how to (re)organize global IS management. The issues of timing and organization of global IS management, however, seem to be of utmost importance in a company’s attempt to implement a new, global business strategy. Based on three case studies from the pharmaceutical industry, this paper analyzes the sequence in which business strategy, organ...

Spin-off and Innovation in the Pharmaceutical Industry

Directory of Open Access Journals (Sweden)

Enzo Peruffo

2014-11-01

Full Text Available Parent companies usually undertake corporate spin-offs to cope with higher competitive environments or when, in high technology industries, the differences between R&D investments and intangible assets are larger. Consistent with the recent “positive view”, spinoffs can be considered as a “proactive strategic choice” to foster innovation, develop new activities, being different from past strategic initiatives and, more generally, not being strictly connected to the corporate strategy of the firm. In order to investigate the relation between divestiture decisions and innovation, we conduct an explorative case study in the pharmaceutical industry to show how spin-offs can help firms to explore new opportunities for innovation, search for new funding and push to create the basis for future development.

Health risks of counterfeit pharmaceuticals.

Science.gov (United States)

ten Ham, Martijn

2003-01-01

Pharmaceutical products are not exempt from the practice of counterfeiting. In recent years, many reports have become available demonstrating the presence of fake medicines on the market. Several studies have demonstrated that they are quite often of bad quality. It is estimated that 5% of all world trade in branded goods is counterfeit, leading to huge financial losses for the pharmaceutical industry. But much more important, from a public health point of view, is that history has shown that such products may lead to a great health risk. The essence of counterfeit products and the reason they are so dangerous is the complete absence of quality control, since they are often indistinguishable from the genuine product. The existence of counterfeit drugs has long been ignored both by the pharmaceutical industry and by drug regulatory authorities. At present initiatives are being taken, nationally and internationally, to curb counterfeiting. It is now realised that a strong regulatory agency is essential, but the initiatives can only be successful if all parties concerned actively co-operate.

Marketing concepts for pharmaceutical service development.

Science.gov (United States)

Grauer, D W

1981-02-01

Marketing concepts as a mechanism to help pharmacy develop, communicate, and sell future pharmaceutical services to consumers are discussed. Pharmacy as a profession must define itself broadly to take advantage of future growth opportunities. These growth opportunities will be realized from unmet health-care needs and changing consumer life style trends and values. New services must therefore be oriented toward consumers (i.e., patients, health professionals, and third-party agencies) to gain acceptance. Dispensing and drug-knowledge-distribution pharmaceutical services are reviewed by a product life cycle analysis of sales profits versus time. A marketing mix for new pharmaceutical services is developed consisting of service, price, distribution, and promotion strategies. Marketing can encompass those key elements necessary to meet the organizational goals of pharmacy and provide a systematic, disciplined approach for presenting a new service to consumers.

New opportunities for biocatalysis: making pharmaceutical processes greener

DEFF Research Database (Denmark)

Woodley, John

2008-01-01

The pharmaceutical industry requires synthetic routes to be environmentally compatible as well as to fulfill the demands of process economics and product specification and to continually reduce development times. Biocatalysis has the potential to deliver 'greener' chemical syntheses, and in this ......The pharmaceutical industry requires synthetic routes to be environmentally compatible as well as to fulfill the demands of process economics and product specification and to continually reduce development times. Biocatalysis has the potential to deliver 'greener' chemical syntheses...... of biocatalysis for making pharmaceutical processes greener....

The Models of Market Economy on the Modern Technological Platforms

Directory of Open Access Journals (Sweden)

Sokolovska Zoia M.

2017-11-01

Full Text Available The article is aimed at analyzing the status of software provision of simulation modeling of economic systems and disclosing the possibilities of application of the integrated software-technological platforms in the building of market models. Problems in the field of applied introduction of the method of simulation modeling have been defined; the status of the software-technological provision of the simulation modeling of economic systems has been analyzed. It has been suggested to use the integrated system of multi-approach simulation modeling AnyLogic as one of the most powerful modern software platforms. The variant of the model of competitive multi-product market adapted to the specifics of pharmaceutical industry enterprises has been considered. The work of the model can be illustrated by results of the situational simulation experiments on the example of the pharmaceutical company «Farmak». The possibilities of parametric adjustment of imitation experiments together with the spectrum of their application in practical activity of pharmaceutical enterprises have been demonstrated.

Pharmaceutical care as a historical, normative-legal and social-economic category in the system of the population health and pharmaceutical care

Directory of Open Access Journals (Sweden)

G. L. Panfilova

2014-08-01

Full Text Available Aim. Terminological vagueness of the term «pharmaceutical care» in domestic legislative framework and scientific environment makes it impossible to introduce new forms and methods of providing pharmaceutical population in Ukraine effectively. In order to form the unified methodological approach to identify and order the use of the mentioned term, the results of organizational-economic studies in pharmacy and the existing legal framework have been analyzed. Methods and results. Using dialectical, historical, logical-semantic and other methods the basic stages in the development of pharmaceutical care have been established and definitions tree of the concept have been constructed. Conclusion. The results of these studies indicate the need for recognition and regulatory mapping integration (organizational and economic of the definition «pharmaceutical care» in domestic legislation and public health practice.

Adsorptive removal of selected pharmaceuticals by mesoporous silica SBA-15

International Nuclear Information System (INIS)

Bui, Tung Xuan; Choi, Heechul

2009-01-01

The removal of five selected pharmaceuticals, viz., carbamazepine, clofibric acid, diclofenac, ibuprofen, and ketoprofen was examined by batch sorption experiments onto a synthesized mesoporous silica SBA-15. SBA-15 was synthesized and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N 2 adsorption-desorption measurement, and point of zero charge (PZC) measurement. Pharmaceutical adsorption kinetics was rapid and occurred on a scale of minutes, following a pseudo-second-order rate expression. Adsorption isotherms were best fitted by the Freundlich isotherm model. High removal rates of individual pharmaceuticals were achieved in acidic media (pH 3-5) and reached 85.2% for carbamazepine, 88.3% for diclofenac, 93.0% for ibuprofen, 94.3% for ketoprofen, and 49.0% for clofibric acid at pH 3 but decreased with increase in pH. SBA-15 also showed high efficiency for removal of a mixture of 5 pharmaceuticals. Except for clofibric acid (35.6%), the removal of pharmaceuticals in the mixture ranged from 75.2 to 89.3%. Based on adsorption and desorption results, the mechanism of the selected pharmaceuticals was found to be a hydrophilic interaction, providing valuable information for further studies to design materials for the purpose. The results of this study suggest that mesoporous-silica-based materials are promising adsorbents for removing pharmaceuticals from not only surface water but also wastewater of pharmaceutical industrial manufactures.

Adsorptive removal of selected pharmaceuticals by mesoporous silica SBA-15

Energy Technology Data Exchange (ETDEWEB)

Bui, Tung Xuan, E-mail: bxtung@gist.ac.kr [Department of Environmental Science and Engineering, Gwangju Institute of Science and Technology (GIST), 261 Cheomdan-gwagiro, Buk-gu, Gwangju 500-712 (Korea, Republic of); Choi, Heechul, E-mail: hcchoi@gist.ac.kr [Department of Environmental Science and Engineering, Gwangju Institute of Science and Technology (GIST), 261 Cheomdan-gwagiro, Buk-gu, Gwangju 500-712 (Korea, Republic of)

2009-09-15

The removal of five selected pharmaceuticals, viz., carbamazepine, clofibric acid, diclofenac, ibuprofen, and ketoprofen was examined by batch sorption experiments onto a synthesized mesoporous silica SBA-15. SBA-15 was synthesized and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N{sub 2} adsorption-desorption measurement, and point of zero charge (PZC) measurement. Pharmaceutical adsorption kinetics was rapid and occurred on a scale of minutes, following a pseudo-second-order rate expression. Adsorption isotherms were best fitted by the Freundlich isotherm model. High removal rates of individual pharmaceuticals were achieved in acidic media (pH 3-5) and reached 85.2% for carbamazepine, 88.3% for diclofenac, 93.0% for ibuprofen, 94.3% for ketoprofen, and 49.0% for clofibric acid at pH 3 but decreased with increase in pH. SBA-15 also showed high efficiency for removal of a mixture of 5 pharmaceuticals. Except for clofibric acid (35.6%), the removal of pharmaceuticals in the mixture ranged from 75.2 to 89.3%. Based on adsorption and desorption results, the mechanism of the selected pharmaceuticals was found to be a hydrophilic interaction, providing valuable information for further studies to design materials for the purpose. The results of this study suggest that mesoporous-silica-based materials are promising adsorbents for removing pharmaceuticals from not only surface water but also wastewater of pharmaceutical industrial manufactures.

Pharmaceutical Distribution Market Channels in Poland

Directory of Open Access Journals (Sweden)

Agnieszka Woś

2009-09-01

Full Text Available Distribution on the pharmaceutical market in Poland is interesting and the most difficult sphere to manage. Numerous varied and specialized companies operating on the market cause that the processes of choosing middlemen in distribution channels are very complex. The hereby article presents the role and location of the companies operating within distribution channels on the pharmaceutical market. It draws attention to the development of non-pharmacy and non-wholesale sales channels.

Pharmaceutical cocrystals: walking the talk.

Science.gov (United States)

Bolla, Geetha; Nangia, Ashwini

2016-06-28

Pharmaceutical cocrystals belong to a sub-class of cocrystals wherein one of the components is a drug molecule (or an active pharmaceutical ingredient, API) and the second is a benign food or drug grade additive (generally regarded as safe, GRAS). The two components are hydrogen-bonded in a fixed stoichiometric ratio in the crystal lattice. In the past decade, pharmaceutical cocrystals have demonstrated significant promise in their ability to modify the physicochemical and pharmacokinetic properties of drug substances, such as the solubility and dissolution rate, bioavailability, particle morphology and size, tableting and compaction, melting point, physical form, biochemical and hydration stability, and permeability. In this feature review, we highlight some prominent examples of drug cocrystals which exhibit variable hardness/softness and elasticity/plasticity depending on coformer selection, improvement of solubility and permeability in the same cocrystal, increase of the melting point for solid formulation, enhanced color performance, photostability and hydration stability, and a longer half-life. Cocrystals of flavanoids and polyphenols can make improved pharmaceuticals and also extend to the larger class of nutraceuticals. The application of crystal engineering to assemble ternary cocrystals expands this field to drug-drug cocrystals which may be useful in multi-drug resistance, mitigating side effects of drugs, or attenuating/enhancing drug action synergistically by rational selection. The advent of new techniques for structural characterization beyond the standard X-ray diffraction will provide a better understanding of drug phases which are at the borderline of crystalline-amorphous nature and even newer opportunities in the future.

Temporal variation of pharmaceuticals in an urban and agriculturally influenced stream

International Nuclear Information System (INIS)

Veach, Allison M.; Bernot, Melody J.

2011-01-01

Pharmaceuticals have become ubiquitous in the aquatic environment. Previous studies consistently demonstrate the prevalence of pharmaceuticals in freshwater but we do not yet know how concentrations vary over time within a given system. Two sites in central Indiana with varying land use in the surrounding watershed (suburban and agricultural) were sampled monthly for pharmaceutical concentrations and stream physiochemical parameters. Sediment samples were also collected at each sampling event for measurement of δ 15 N natural abundance and sediment organic content. Across sites and sampling events, twelve pharmaceuticals were detected including acetaminophen, caffeine, carbamazepine, cotinine, N,N-diethyl-meta-toluamide (DEET), gemfibrozil, ibuprofen, sulfadimethoxine, sulfamethazine, sulfamethoxazole, triclosan, and trimethoprim. Sulfathiazole, lincomycin, and tylosin were not detected at either site at any time. The agriculturally-influenced site had comparable pharmaceutical concentrations to the urban-influenced site. In general, pharmaceutical concentrations increased during winter at both sites and decreased during spring and summer. Multiple regression analyses indicated that water column dissolved oxygen, the number of days since precipitation, and solar radiation influenced total pharmaceutical concentration in the urban-influenced site; whereas pH, chlorophyll a concentration, and total amount of rainfall in the previous 10 days influenced total pharmaceutical concentrations in the agriculturally-influenced site. Pharmaceutical concentrations were not correlated with sediment δ 15 N across or within sites. However, sediment in the urban-influenced site had higher mean δ 15 N signatures relative to sediment in the agriculturally-influenced site. These data indicate pharmaceuticals are persistent in aquatic ecosystems influenced by both agricultural and suburban activity. Pharmaceuticals are designed to have a physiological effect; therefore, it is

Analytical Validation of Accelerator Mass Spectrometry for Pharmaceutical Development: the Measurement of Carbon-14 Isotope Ratio

International Nuclear Information System (INIS)

Keck, B.D.; Ognibene, T.; Vogel, J.S.

2010-01-01

Accelerator mass spectrometry (AMS) is an isotope based measurement technology that utilizes carbon-14 labeled compounds in the pharmaceutical development process to measure compounds at very low concentrations, empowers microdosing as an investigational tool, and extends the utility of 14 C labeled compounds to dramatically lower levels. It is a form of isotope ratio mass spectrometry that can provide either measurements of total compound equivalents or, when coupled to separation technology such as chromatography, quantitation of specific compounds. The properties of AMS as a measurement technique are investigated here, and the parameters of method validation are shown. AMS, independent of any separation technique to which it may be coupled, is shown to be accurate, linear, precise, and robust. As the sensitivity and universality of AMS is constantly being explored and expanded, this work underpins many areas of pharmaceutical development including drug metabolism as well as absorption, distribution and excretion of pharmaceutical compounds as a fundamental step in drug development. The validation parameters for pharmaceutical analyses were examined for the accelerator mass spectrometry measurement of 14 C/C ratio, independent of chemical separation procedures. The isotope ratio measurement was specific (owing to the 14 C label), stable across samples storage conditions for at least one year, linear over 4 orders of magnitude with an analytical range from one tenth Modern to at least 2000 Modern (instrument specific). Further, accuracy was excellent between 1 and 3 percent while precision expressed as coefficient of variation is between 1 and 6% determined primarily by radiocarbon content and the time spent analyzing a sample. Sensitivity, expressed as LOD and LLOQ was 1 and 10 attomoles of carbon-14 (which can be expressed as compound equivalents) and for a typical small molecule labeled at 10% incorporated with 14 C corresponds to 30 fg equivalents. AMS

Analytical Validation of Accelerator Mass Spectrometry for Pharmaceutical Development: the Measurement of Carbon-14 Isotope Ratio.

Energy Technology Data Exchange (ETDEWEB)

Keck, B D; Ognibene, T; Vogel, J S

2010-02-05

Accelerator mass spectrometry (AMS) is an isotope based measurement technology that utilizes carbon-14 labeled compounds in the pharmaceutical development process to measure compounds at very low concentrations, empowers microdosing as an investigational tool, and extends the utility of {sup 14}C labeled compounds to dramatically lower levels. It is a form of isotope ratio mass spectrometry that can provide either measurements of total compound equivalents or, when coupled to separation technology such as chromatography, quantitation of specific compounds. The properties of AMS as a measurement technique are investigated here, and the parameters of method validation are shown. AMS, independent of any separation technique to which it may be coupled, is shown to be accurate, linear, precise, and robust. As the sensitivity and universality of AMS is constantly being explored and expanded, this work underpins many areas of pharmaceutical development including drug metabolism as well as absorption, distribution and excretion of pharmaceutical compounds as a fundamental step in drug development. The validation parameters for pharmaceutical analyses were examined for the accelerator mass spectrometry measurement of {sup 14}C/C ratio, independent of chemical separation procedures. The isotope ratio measurement was specific (owing to the {sup 14}C label), stable across samples storage conditions for at least one year, linear over 4 orders of magnitude with an analytical range from one tenth Modern to at least 2000 Modern (instrument specific). Further, accuracy was excellent between 1 and 3 percent while precision expressed as coefficient of variation is between 1 and 6% determined primarily by radiocarbon content and the time spent analyzing a sample. Sensitivity, expressed as LOD and LLOQ was 1 and 10 attomoles of carbon-14 (which can be expressed as compound equivalents) and for a typical small molecule labeled at 10% incorporated with {sup 14}C corresponds to 30 fg

An Overview on Novel Microbial Determination Methods in Pharmaceutical and Food Quality Control

Directory of Open Access Journals (Sweden)

Mahboob Nemati

2016-09-01

Full Text Available Traditional microbiological methods tend to be labor-intensive and time-consuming. Rapid and novel methods in microbiological tests provide more sensitive, precise and reproducible results compared with conventional methods. In microbiology, the most rapid testing methods belong to the field of biotechnology such as PCR, ELISA, ATP bioluminescence and etc. Nevertheless impedance microbiology, biosensors and analytical procedures to determine microbial constituents are of significance. The present review article was conducted using internet databases and related scientific literatures and articles that provide information on developments in the rapid methods in microbiology. The main focus is on the application of rapid methods in microbial quality control of pharmaceutical products. Reviewed literature showed that rapid methods and automation in microbiology is an advanced area for studying and applying of improved methods in the early detection, and characterization of microorganisms and their products in food, pharmaceutical and cosmetic industrials as well as environmental monitoring and clinical applications. It can be concluded that rapid methods and automation in microbiology should continue as potent and efficient technologies to develop the novel tests to be performed in the future because of the ever-increasing concerns about the safety of food and pharmaceutical products. However the main issues to be considered are the scale up of developed methods and the regulatory requirements.

[Anti-counterfeit activities of pharmaceutical companies in Japan: for patient safety].

Science.gov (United States)

Shofuda, Ken-ichi; Aragane, Katsumi; Igari, Yasutaka; Matsumoto, Kinya; Ito, Kazuya

2014-01-01

Global spread of counterfeit medicines is an imminent threat for the patients' safety. Although major targets of counterfeits are still erectile dysfunction (ED) drugs in the industrialized countries, including Japan, anti-cancer agents and some medicines for metabolic syndromes are also being counterfeited and circulated to the market mainly through the Internet. Due to the global expansion of the business, pharmaceutical companies based in Japan are suffering from the damage of counterfeits, illegal sales including diversion, and thefts, which have never been experienced in the conventional domestic market. We, pharmaceutical companies, must be responsible for the prevention of the prevalence because our mission is to deliver effective and safe medicine to patients. For this end, we are taking necessary actions including, 1. Forestalling counterfeit, falsification and illicit trade: Measures to prevent counterfeiting are taken by introducing anti-counterfeit technologies to the packaging and tablets on a risk basis. It is also important to establish supply chain security on a global scale. 2. Finding out counterfeits and cooperating crackdown: We are conducting market and internet surveillances when high risk products are sold in high risk markets. The outcome of the criminal investigation is reported to authorities and police if necessary. 3. Conducting educational campaign to medical staff or patients: For example, four companies which manufacture and sell ED drug in Japan are collaboratively continuing activities to raise the awareness of the danger of Internet purchase. To deliver effective and safe medicines stably and globally, pharmaceutical companies extend comprehensive measures against counterfeit and illicit trading.

Biotechnological applications of functional metagenomics in the food and pharmaceutical industries.

Science.gov (United States)

Coughlan, Laura M; Cotter, Paul D; Hill, Colin; Alvarez-Ordóñez, Avelino

2015-01-01

Microorganisms are found throughout nature, thriving in a vast range of environmental conditions. The majority of them are unculturable or difficult to culture by traditional methods. Metagenomics enables the study of all microorganisms, regardless of whether they can be cultured or not, through the analysis of genomic data obtained directly from an environmental sample, providing knowledge of the species present, and allowing the extraction of information regarding the functionality of microbial communities in their natural habitat. Function-based screenings, following the cloning and expression of metagenomic DNA in a heterologous host, can be applied to the discovery of novel proteins of industrial interest encoded by the genes of previously inaccessible microorganisms. Functional metagenomics has considerable potential in the food and pharmaceutical industries, where it can, for instance, aid (i) the identification of enzymes with desirable technological properties, capable of catalyzing novel reactions or replacing existing chemically synthesized catalysts which may be difficult or expensive to produce, and able to work under a wide range of environmental conditions encountered in food and pharmaceutical processing cycles including extreme conditions of temperature, pH, osmolarity, etc; (ii) the discovery of novel bioactives including antimicrobials active against microorganisms of concern both in food and medical settings; (iii) the investigation of industrial and societal issues such as antibiotic resistance development. This review article summarizes the state-of-the-art functional metagenomic methods available and discusses the potential of functional metagenomic approaches to mine as yet unexplored environments to discover novel genes with biotechnological application in the food and pharmaceutical industries.

Biotechnological applications of functional metagenomics in the food and pharmaceutical industries

Directory of Open Access Journals (Sweden)

Laura M Coughlan

2015-06-01

Full Text Available Microorganisms are found throughout nature, thriving in a vast range of environmental conditions. The majority of them are unculturable or difficult to culture by traditional methods. Metagenomics enables the study of all microorganisms, regardless of whether they can be cultured or not, through the analysis of genomic data obtained directly from an environmental sample, providing knowledge of the species present and allowing the extraction of information regarding the functionality of microbial communities in their natural habitat. Function-based screenings, following the cloning and expression of metagenomic DNA in a heterologous host, can be applied to the discovery of novel proteins of industrial interest encoded by the genes of previously inaccessible microorganisms. Functional metagenomics has considerable potential in the food and pharmaceutical industries, where it can, for instance, aid (i the identification of enzymes with desirable technological properties, capable of catalysing novel reactions or replacing existing chemically synthesized catalysts which may be difficult or expensive to produce, and able to work under a wide range of environmental conditions encountered in food and pharmaceutical processing cycles including extreme conditions of temperature, pH, osmolarity, etc; (ii the discovery of novel bioactives including antimicrobials active against microorganisms of concern both in food and medical settings; (iii the investigation of industrial and societal issues such as antibiotic resistance development. This review article summarizes the state-of-the-art functional metagenomic methods available and discusses the potential of functional metagenomic approaches to mine as yet unexplored environments to discover novel genes with biotechnological application in the food and pharmaceutical industries.

Impacts of international sanctions on Iranian pharmaceutical market.

Science.gov (United States)

Cheraghali, Abdol Majid

2013-07-31

Iran in recent decade faced several regional and international sanctions in foreign trade, financial and banking services. Iran national pharmaceutical industry has always played a major role in providing medicines to the Iranian patients. However, following the sanctions it has faced profound difficulties for importing of both finished products and pharmaceutical raw materials. Although medicines are exempted from sanctions, due to restriction on money transaction and proper insurance Iranian pharmaceutical companies have to pay cash in advance for imports of medicines and raw materials or to secure offshore funds at very high risks. Current situation in Iran pharmaceutical market confirms that the sanctions against Iran are affecting ordinary citizens and national health sector which resulted to reduction of availability of lifesaving medicines in the local market and has caused increasing pain and suffering for Iranian patients.

Attitudes and beliefs regarding direct-to-consumer advertising of pharmaceutical drugs: an exploratory comparison of physicians and pharmaceutical sales representatives.

Science.gov (United States)

Schulz, Steven A; Broekemier, Gregory M; Burkink, Tim J

2014-01-01

Even with many changes in regulation in recent years, direct-to-consumer advertising (DTCA) of pharmaceutical drugs remains a complicated and contentious issue. Many in our society argue for increased legislation of DTCA while others believe that DTCA serves a useful purpose and should not be overregulated. This study was designed to compare attitudes and beliefs regarding DTCA held by two key stakeholder groups, physicians and pharmaceutical sales representatives. A questionnaire was created, pretested, and administered to 30 physicians and 30 pharmaceutical sales representatives to investigate these issues. Significant differences between these two groups were found and implications for DTCA are discussed.

How can a policy foster local pharmaceutical production and still protect public health? Lessons from the health-industry complex in Brazil.

Science.gov (United States)

da Fonseca, Elize Massard

2018-04-01

The global health community is increasingly advocating for the local production of pharmaceuticals in developing countries as a way to promote technology transfer, capacity building and improve access to medicines. However, efforts to advance drug manufacturing in these countries revive an old dilemma of fostering technological development versus granting access to social services, such as healthcare. This paper explores the case of Brazil, a country that has developed large-scale health-inspired industrial policies, but is, yet, little understood. Brazil's experience suggests that progressive healthcare bureaucrats can create innovative practices for technology and knowledge transfers. It also demonstrates that highly competitive pharmaceutical firms can collaborate with each other, if a government provides them the right incentives. Reforming regulatory policies is crucial for guaranteeing high-quality products in developing countries, but governments must play a crucial role in supporting local firms to adapt to these regulations. These findings send a strong message to global health policymakers and practitioners on the conditions to create a suitable environment for local production of medical products.

Toward greener analytical techniques for the absolute quantification of peptides in pharmaceutical and biological samples.

Science.gov (United States)

Van Eeckhaut, Ann; Mangelings, Debby

2015-09-10

Peptide-based biopharmaceuticals represent one of the fastest growing classes of new drug molecules. New reaction types included in the synthesis strategies to reduce the rapid metabolism of peptides, along with the availability of new formulation and delivery technologies, resulted in an increased marketing of peptide drug products. In this regard, the development of analytical methods for quantification of peptides in pharmaceutical and biological samples is of utmost importance. From the sample preparation step to their analysis by means of chromatographic or electrophoretic methods, many difficulties should be tackled to analyze them. Recent developments in analytical techniques emphasize more and more on the use of green analytical techniques. This review will discuss the progresses in and challenges observed during green analytical method development for the quantification of peptides in pharmaceutical and biological samples. Copyright © 2015 Elsevier B.V. All rights reserved.

Pharmaceuticals as Groundwater Tracers - Applications and Limitations

Science.gov (United States)

Scheytt, T. J.; Mersmann, P.; Heberer, T.

2003-12-01

Pharmaceutically active substances and metabolites are found at concentrations up to the microgram/L-level in groundwater samples from the Berlin (Germany) area and from several other places world wide. Among the compounds detected in groundwater are clofibric acid, propyphenazone, diclofenac, ibuprofen, and carbamazepine. Clofibric acid, the active metabolite of clofibrate and etofibrate (blood lipid regulators) is detected in groundwater at maximum concentrations of 7300 ng/L. Among the most important input paths of drugs are excretion and disposal into the sewage system. Groundwater contamination is likely to be due to leaky sewage systems, influent streams, bank filtration, and irrigation with effluent water from sewage treatment plants. There are no known natural sources of the above mentioned pharmaceuticals. The use of pharmaceuticals as tracers may include: (a) Quantification of infiltration from underground septic tanks (b) Detection of leaky sewage systems / leaky sewage pipes (c) Estimation of the effectiveness of sewage treatment plants (d) Identification of transport pathways of other organic compounds (e) Quantification of surface water / groundwater interaction (f) Characterization of the biodegradation potential. The use of pharmaceuticals as tracers is limited by variations in input. These variations depend on the amount of drugs prescribed and used in the study area, the social structure of the community, the amount of hospital discharge, and temporal concentration variations. Furthermore, the analysis of trace amounts of pharmaceuticals is sophisticated and expensive and may therefore limit the applicability of pharmaceuticals as tracers. Finally, the transport and degradation behavior of pharmaceuticals is not fully understood. Preliminary experiments in the laboratory were conducted using sediment material and groundwater from the Berlin area to evaluate the transport and sorption behavior of selected drugs. Results of the column experiments

Why regulatory indifference towards pharmaceutical pollution of the ...

African Journals Online (AJOL)

Unlike other environmental contaminants, pharmaceutical pollutants are not yet regulated globally, simply because acute risk assessments show insignificant human health hazard. But the pitfalls of pharmaceutical pollutants extend beyond acute effects to delayed effects from bioaccumulation, amplified effects from ...

Unlicensed pharmaceutical preparations for clinical patient care: Ensuring safety.

Science.gov (United States)

de Wilde, Sofieke; de Jong, Maria G H; Le Brun, Paul P H; Guchelaar, Henk-Jan; Schimmel, Kirsten J M

2018-01-01

Most medicinal products dispensed to patients have marketing authorization (MA) to ensure high quality of the product, safety, and efficacy. However, in daily practice, to treat patients adequately, there is a medical need for drugs that do not hold MA. To meet this medical need, medicinal products are used in clinical care without MA (unlicensed), such as products prepared by (local) pharmacies: the pharmaceutical preparations. Three types of pharmaceutical preparations are distinguished: (i) reconstitution in excess of summary of product characteristics; (ii) adaptation of a licensed medicinal product (outside its official labeling); (iii) medicinal products from an active pharmaceutical ingredient. Although unlicensed, patients may expect the same quality for these unlicensed pharmaceutical preparations as for the licensed medicinal products. To assure this quality, a proper risk-benefit assessment and proper documentation in (centralized) patient registries and linking to a national pharmacovigilance database should be in place. Based on a risk assessment matrix, requirements for quality assurance can be determined, which has impact on the level of documentation of a pharmaceutical preparation. In this paper, the approach for good documentation including quality assurance and benefit-risk assessment will be discussed and possibilities for patient registries are described to make these crucial preparations available for regular patient care. KEY POINTS Ensuring pharmaceutical quality and performing a proper benefit-risk assessment will guarantee safe use of pharmaceutical preparations. Good documentation of (ultra-)orphan treatments can be collected in centralized patient registries and should be combined with existing information in (inter)national databases and self-reflection of patients. Linking patient registries to a centralized database for adverse drug events is highly recommended as it increases safety control of the (ultra) orphan pharmaceutical

Stability of injectable pharmaceutical Compvit-B

International Nuclear Information System (INIS)

Gonzalez Gay, Olivia Teresa; Sordo Martinez, Liset; Canal Reyes, Luis Javier

2011-01-01

Compvit-B is a lyophilized injectable polypharmaceutical made up of 100 mg of B 1 , 100 mg of B 6 and 5 000 μg of B 1 2. It is prescribed to treat all types of neuropathies and neurodegenerative diseases. The objective of this paper was the technological development of a stable formulation. For the evaluation of the quality of this drug, three pilot batches were scaled up and were subjected to physical, chemical and microbiological tests; the results were all satisfactory. The stability studies of lyophilized Compvit-B were performed at room temperature. They showed that the pharmaceutical was stable for 3 years and the formulation was regenerated for 72 hours. This drug is registered at the Cuban regulating body called State Center for Drug Control and has been included in the Basic Group of Drugs in Cuba. It has been put on the market by the national drug industry. It is also widely used in the hospital services in Cuba

Pharmaceutical supply chain risks: a systematic review

Science.gov (United States)

2013-01-01

Introduction Supply of medicine as a strategic product in any health system is a top priority. Pharmaceutical companies, a major player of the drug supply chain, are subject to many risks. These risks disrupt the supply of medicine in many ways such as their quantity and quality and their delivery to the right place and customers and at the right time. Therefore risk identification in the supply process of pharmaceutical companies and mitigate them is highly recommended. Objective In this study it is attempted to investigate pharmaceutical supply chain risks with perspective of manufacturing companies. Methods Scopus, PubMed, Web of Science bibliographic databases and Google scholar scientific search engines were searched for pharmaceutical supply chain risk management studies with 6 different groups of keywords. All results found by keywords were reviewed and none-relevant articles were excluded by outcome of interests and researcher boundaries of study within 4 steps and through a systematic method. Results Nine articles were included in the systematic review and totally 50 main risks based on study outcome of interest extracted which classified in 7 categories. Most of reported risks were related to supply and supplier issues. Organization and strategy issues, financial, logistic, political, market and regulatory issues were in next level of importance. Conclusion It was shown that the majority of risks in pharmaceutical supply chain were internal risks due to processes, people and functions mismanagement which could be managed by suitable mitigation strategies. PMID:24355166

'Linkage' pharmaceutical evergreening in Canada and Australia

Science.gov (United States)

Faunce, Thomas A; Lexchin, Joel

2007-01-01

'Evergreening' is not a formal concept of patent law. It is best understood as a social idea used to refer to the myriad ways in which pharmaceutical patent owners utilise the law and related regulatory processes to extend their high rent-earning intellectual monopoly privileges, particularly over highly profitable (either in total sales volume or price per unit) 'blockbuster' drugs. Thus, while the courts are an instrument frequently used by pharmaceutical brand name manufacturers to prolong their patent royalties, 'evergreening' is rarely mentioned explicitly by judges in patent protection cases. The term usually refers to threats made to competitors about a brand-name manufacturer's tactical use of pharmaceutical patents (including over uses, delivery systems and even packaging), not to extension of any particular patent over an active product ingredient. This article focuses in particular on the 'evergreening' potential of so-called 'linkage' provisions, imposed on the regulatory (safety, quality and efficacy) approval systems for generic pharmaceuticals of Canada and Australia, by specific articles in trade agreements with the US. These 'linkage' provisions have also recently appeared in the Korea-US Free Trade Agreement (KORUSFTA). They require such drug regulators to facilitate notification of, or even prevent, any potential patent infringement by a generic pharmaceutical manufacturer. This article explores the regulatory lessons to be learnt from Canada's and Australia's shared experience in terms of minimizing potential adverse impacts of such 'linkage evergreening' provisions on drug costs and thereby potentially on citizen's access to affordable, essential medicines. PMID:17543113

Pharmaceutical supply chain risks: a systematic review.

Science.gov (United States)

Jaberidoost, Mona; Nikfar, Shekoufeh; Abdollahiasl, Akbar; Dinarvand, Rassoul

2013-12-19

Supply of medicine as a strategic product in any health system is a top priority. Pharmaceutical companies, a major player of the drug supply chain, are subject to many risks. These risks disrupt the supply of medicine in many ways such as their quantity and quality and their delivery to the right place and customers and at the right time. Therefore risk identification in the supply process of pharmaceutical companies and mitigate them is highly recommended. In this study it is attempted to investigate pharmaceutical supply chain risks with perspective of manufacturing companies. Scopus, PubMed, Web of Science bibliographic databases and Google scholar scientific search engines were searched for pharmaceutical supply chain risk management studies with 6 different groups of keywords. All results found by keywords were reviewed and none-relevant articles were excluded by outcome of interests and researcher boundaries of study within 4 steps and through a systematic method. Nine articles were included in the systematic review and totally 50 main risks based on study outcome of interest extracted which classified in 7 categories. Most of reported risks were related to supply and supplier issues. Organization and strategy issues, financial, logistic, political, market and regulatory issues were in next level of importance. It was shown that the majority of risks in pharmaceutical supply chain were internal risks due to processes, people and functions mismanagement which could be managed by suitable mitigation strategies.

Critical gases for critical issues: CO2 technologies for oral drug delivery.

Science.gov (United States)

Danan, Hana; Esposito, Pierandrea

2014-02-01

In recent years, CO2-based technologies have gained considerable interest in the pharmaceutical industry for their potential applications in drug formulation and drug delivery. The exploitation of peculiar properties of gases under supercritical conditions has been studied in the last 20 years with mixed results. Promising drug-delivery technologies, based on supercritical CO2, have mostly failed when facing challenges of industrial scaleability and economical viability. Nevertheless, a 'second generation' of processes, based on CO2 around and below critical point has been developed, possibly offering technology-based solutions to some of the current issues of pharmaceutical development. In this review, we highlight the most recent advancements in this field, with a particular focus on the potential of CO2-based technologies in addressing critical issues in oral delivery, and briefly discuss the future perspectives of dense CO2-assisted processes as enabling technologies in drug delivery.

Temporal variation of pharmaceuticals in an urban and agriculturally influenced stream

Energy Technology Data Exchange (ETDEWEB)

Veach, Allison M., E-mail: amveach@k-state.edu; Bernot, Melody J., E-mail: mjbernot@bsu.edu

2011-10-01

Pharmaceuticals have become ubiquitous in the aquatic environment. Previous studies consistently demonstrate the prevalence of pharmaceuticals in freshwater but we do not yet know how concentrations vary over time within a given system. Two sites in central Indiana with varying land use in the surrounding watershed (suburban and agricultural) were sampled monthly for pharmaceutical concentrations and stream physiochemical parameters. Sediment samples were also collected at each sampling event for measurement of {delta}{sup 15}N natural abundance and sediment organic content. Across sites and sampling events, twelve pharmaceuticals were detected including acetaminophen, caffeine, carbamazepine, cotinine, N,N-diethyl-meta-toluamide (DEET), gemfibrozil, ibuprofen, sulfadimethoxine, sulfamethazine, sulfamethoxazole, triclosan, and trimethoprim. Sulfathiazole, lincomycin, and tylosin were not detected at either site at any time. The agriculturally-influenced site had comparable pharmaceutical concentrations to the urban-influenced site. In general, pharmaceutical concentrations increased during winter at both sites and decreased during spring and summer. Multiple regression analyses indicated that water column dissolved oxygen, the number of days since precipitation, and solar radiation influenced total pharmaceutical concentration in the urban-influenced site; whereas pH, chlorophyll a concentration, and total amount of rainfall in the previous 10 days influenced total pharmaceutical concentrations in the agriculturally-influenced site. Pharmaceutical concentrations were not correlated with sediment {delta}{sup 15}N across or within sites. However, sediment in the urban-influenced site had higher mean {delta}{sup 15}N signatures relative to sediment in the agriculturally-influenced site. These data indicate pharmaceuticals are persistent in aquatic ecosystems influenced by both agricultural and suburban activity. Pharmaceuticals are designed to have a physiological

Pharmaceutical expenditure forecast model to support health policy decision making.

Science.gov (United States)

Rémuzat, Cécile; Urbinati, Duccio; Kornfeld, Åsa; Vataire, Anne-Lise; Cetinsoy, Laurent; Aballéa, Samuel; Mzoughi, Olfa; Toumi, Mondher

2014-01-01

With constant incentives for healthcare payers to contain their pharmaceutical budgets, modelling policy decision impact became critical. The objective of this project was to test the impact of various policy decisions on pharmaceutical budget (developed for the European Commission for the project 'European Union (EU) Pharmaceutical expenditure forecast' - http://ec.europa.eu/health/healthcare/key_documents/index_en.htm). A model was built to assess policy scenarios' impact on the pharmaceutical budgets of seven member states of the EU, namely France, Germany, Greece, Hungary, Poland, Portugal, and the United Kingdom. The following scenarios were tested: expanding the UK policies to EU, changing time to market access, modifying generic price and penetration, shifting the distribution chain of biosimilars (retail/hospital). Applying the UK policy resulted in dramatic savings for Germany (10 times the base case forecast) and substantial additional savings for France and Portugal (2 and 4 times the base case forecast, respectively). Delaying time to market was found be to a very powerful tool to reduce pharmaceutical expenditure. Applying the EU transparency directive (6-month process for pricing and reimbursement) increased pharmaceutical expenditure for all countries (from 1.1 to 4 times the base case forecast), except in Germany (additional savings). Decreasing the price of generics and boosting the penetration rate, as well as shifting distribution of biosimilars through hospital chain were also key methods to reduce pharmaceutical expenditure. Change in the level of reimbursement rate to 100% in all countries led to an important increase in the pharmaceutical budget. Forecasting pharmaceutical expenditure is a critical exercise to inform policy decision makers. The most important leverages identified by the model on pharmaceutical budget were driven by generic and biosimilar prices, penetration rate, and distribution. Reducing, even slightly, the prices of

Electrochemical treatment of pharmaceutical and industrial wastewater by anodic oxidation

International Nuclear Information System (INIS)

Menapace, H. M.; Fellerer, M.; Treschnitzer, M.

2009-01-01

In modern medicine pharmaceuticals play a decisive role: because of an increased life expectancy and intensive care medicine an increasing amount of pharmaceuticals is produced. thus these substances are consumed in a mass of tons per year in industrialized countries. Wastewater effluents from sewage treatment plants (STP) are important point sources for residues of pharmaceuticals and complexing agents in the aquatic environment. For this reason a research project, which started in December 2006, was established to eliminate pharmaceutical substances and complexing agents found in wastewater as micropollutants. (Author)

ETHICAL ASPECTS OF THE COOPERATION BETWEEN PHYSICIAN AND PHARMACEUTICAL INDUSTRY

Directory of Open Access Journals (Sweden)

Jože Drinovec

2001-09-01

Full Text Available Background. It is not possible to isolated ethical aspects and norms in the work of physician from the professional and scientific ones. The physician will not act contrary to ethical principles if he will work for the interests of the patient and in accordance with scientific knowledge.Present situation and possible solutions. Every physician, especially if working in university institution is co-operating with pharmaceutical industry, at least he is makes the prescriptions and chooses one drug of the possible ones. There are also other aspects of co-operation: clinical trials, writing expertise and lectures at scientific meetings, sponsored by pharmaceutical industry. There are guidelines and codex in Western countries for more than ten years, which regulate the relation between physician and pharmaceutical industry. The most important ones are those from World Health Organisation, European Federation of Pharmaceutical Industries’ Associations’, and International Federation of Pharmaceutical Manufacturers Associations’. Scientific independence of lecturers and writers is tried to be achieved by disclosure of relevant financial relation with pharmaceutical corporation in advance.Conclusions. Physician working with pharmaceutical industry has o follow the guidelines of international professional associations. He/she has to be independent relaying only upon scientific and professional principles seeing primary the benefit of the patient.

Pharmaceutical market in Serbia

Directory of Open Access Journals (Sweden)

Veselin Tima Dickov

2012-02-01

Full Text Available Marketing concept formed around the focus on the consumers, their needs, wants and demands, evolves in the case of pharmaceutical into a care of the complex interest of constituents generating demand on this market and #8211; pres scribers whose role is to select therapies, pharmacists who dispense drugs within a specialized distribution channel to the final consumer -patient, alongside the payers and #8211; the state and or insurance companies refund a part of or total costs of the pharmaceutical product. A special challenge that the subject raises is the existence of controversy generated from two sources. Marketing controversy stems from criticism leveled at the effectiveness and efficiency of marketing activities and the debatable ethical code of conduct. [J Intercult Ethnopharmacol 2012; 1(1.000: 44-51

R&D INTENSITY AND IPO UNDERPRICING: CASE STUDY ON PHARMACEUTICAL AND BIOTECH INDUSTRIES IN THE US

Directory of Open Access Journals (Sweden)

Tommy C. Efrata

2016-02-01

Full Text Available Asymmetric information between the issuer to potential investors believed by some academics in finance as one of the main causes of the phenomenon of underpricing at the time of the initial public offering (IPO. On science and technology-based company main problem lies in how to conduct assessments on the future value of a product that is still in the development stage. The issue became more prominent on pharmaceutical companies and biotechnology, due to the characteristics of this industry is the high expense, complex process, and the lengthy process of research and development (R & D of a product. This study describes the characteristics above is associated with the phenomenon of underpricing when companies conduct IPO. The samples are 82 pharmaceutical companies and biotechnology conduct IPO in the United States stock market in 1998-2005. The results of this study revealed a negative correlation between the intensity of R & D and IPO underpricing phenomenon in this industry. These studies have identified R & D as the main source of information asymmetry that led to the phenomenon of underpricing for pharmaceutical companies and biotechnology.

Current Status and Issues in Basic Pharmaceutical Education.

Science.gov (United States)

Yasuhara, Tomohisa

2017-01-01

Basic research in pharmaceutical sciences has a long and successful history. Researchers in this field have long given prime importance to the knowledge they have gained through their pharmaceutical education. The transition of pharmacy education to a 6-year course term has not only extended its duration but also placed more emphasis on practical clinical education. The School Education Act (in article 87, second paragraph) determines that "the term of the course, whose main purpose is to cultivate practical ability in clinical pharmacy, shall be six years" (excerpt). The 6-year pharmacy education is an exception to the general 4-year university term determined by the School Education Act. Therefore, the purpose of the 6-year course in pharmacy is clearly proscribed. This is true of the basic course in pharmaceutical education as well; hence, the basic course must be oriented toward developing "practical ability in clinical" education, too. The 6-year pharmacy course, starting from practice (Do), has evolved with the development of a syllabus that includes a model core curriculum (Plan). Furthermore, improvement in the course can be seen by the promoted development of faculty (Act). Now, evidence-based education research will be introduced (Check). This is how the Plan-Do-Check-Act cycle in pharmaceutical education is expected to work. Currently, pedagogy research in pharmacy education has just begun, so it is difficult to evaluate at this time whether basic pharmaceutical education does in fact contribute to enhancing the "practical clinical ability" component of pharmaceutical education.

Fate of pharmaceuticals in full-scale source separated sanitation system.

Science.gov (United States)

Butkovskyi, A; Hernandez Leal, L; Rijnaarts, H H M; Zeeman, G

2015-11-15

Removal of 14 pharmaceuticals and 3 of their transformation products was studied in a full-scale source separated sanitation system with separate collection and treatment of black water and grey water. Black water is treated in an up-flow anaerobic sludge blanket (UASB) reactor followed by oxygen-limited autotrophic nitrification-denitrification in a rotating biological contactor and struvite precipitation. Grey water is treated in an aerobic activated sludge process. Concentration of 10 pharmaceuticals and 2 transformation products in black water ranged between low μg/l to low mg/l. Additionally, 5 pharmaceuticals were also present in grey water in low μg/l range. Pharmaceutical influent loads were distributed over two streams, i.e. diclofenac was present for 70% in grey water, while the other compounds were predominantly associated to black water. Removal in the UASB reactor fed with black water exceeded 70% for 9 pharmaceuticals out of the 12 detected, with only two pharmaceuticals removed by sorption to sludge. Ibuprofen and the transformation product of naproxen, desmethylnaproxen, were removed in the rotating biological contactor. In contrast, only paracetamol removal exceeded 90% in the grey water treatment system while removal of other 7 pharmaceuticals was below 40% or even negative. The efficiency of pharmaceutical removal in the source separated sanitation system was compared with removal in the conventional sewage treatment plants. Furthermore, effluent concentrations of black water and grey water treatment systems were compared with predicted no-effect concentrations to assess toxicity of the effluent. Concentrations of diclofenac, ibuprofen and oxazepam in both effluents were higher than predicted no-effect concentrations, indicating the necessity of post-treatment. Ciprofloxacin, metoprolol and propranolol were found in UASB sludge in μg/g range, while pharmaceutical concentrations in struvite did not exceed the detection limits. Copyright © 2015

Biotechnology and genetic engineering in the new drug development. Part I. DNA technology and recombinant proteins.

Science.gov (United States)

Stryjewska, Agnieszka; Kiepura, Katarzyna; Librowski, Tadeusz; Lochyński, Stanisław

2013-01-01

Pharmaceutical biotechnology has a long tradition and is rooted in the last century, first exemplified by penicillin and streptomycin as low molecular weight biosynthetic compounds. Today, pharmaceutical biotechnology still has its fundamentals in fermentation and bioprocessing, but the paradigmatic change affected by biotechnology and pharmaceutical sciences has led to an updated definition. The biotechnology revolution redrew the research, development, production and even marketing processes of drugs. Powerful new instruments and biotechnology related scientific disciplines (genomics, proteomics) make it possible to examine and exploit the behavior of proteins and molecules. Recombinant DNA (rDNA) technologies (genetic, protein, and metabolic engineering) allow the production of a wide range of peptides, proteins, and biochemicals from naturally nonproducing cells. This technology, now approximately 25 years old, is becoming one of the most important technologies developed in the 20(th) century. Pharmaceutical products and industrial enzymes were the first biotech products on the world market made by means of rDNA. Despite important advances regarding rDNA applications in mammalian cells, yeasts still represent attractive hosts for the production of heterologous proteins. In this review we describe these processes.

Capacity to deliver pharmaceutical care by community pharmacies ...

African Journals Online (AJOL)

Pharmacy practice has transcended from largely a dispensary practice to pharmaceutical care practice. The capacity of community pharmacies to deliver pharmaceutical care was studied using pretested self survey methods. Ninety five percent (95%) of the respondents always educated customers on drug related needs, ...

Pharmaceutical cocrystals: along the path to improved medicines.

Science.gov (United States)

Duggirala, Naga K; Perry, Miranda L; Almarsson, Örn; Zaworotko, Michael J

2016-01-14

Cocrystals, a long known but understudied class of crystalline solids, have attracted interest from crystal engineers and pharmaceutical scientists in the past decade and are now an integral part of the preformulation stage of drug development. This is largely because cocrystals that contain a drug molecule, pharmaceutical cocrystals, can modify physicochemical properties without the need for covalent modification of the drug molecule. This review presents a brief history of cocrystals before addressing recent advances in design, discovery and development of pharmaceutical cocrystals that have occurred since an earlier review published in 2004. We address four aspects of cocrystals: nomenclature; design using hydrogen-bonded supramolecular synthons; methods of discovery and synthesis; development of pharmaceutical cocrystals as drug products. Cocrystals can be classified into molecular cocrystals (MCCs) that contain only neutral components (coformers) and ionic cocrystals (ICCs), which are comprised of at least one ionic coformer that is a salt. That cocrystals, especially ICCs, offer much greater diversity in terms of composition and properties than single component crystal forms and are amenable to design makes them of continuing interest. Seven recent case studies that illustrate how pharmaceutical cocrystals can improve physicochemical properties and clinical performance of drug substances, including a recently approved drug product based upon an ICC, are presented.

Pharmaceutical Cocrystals

OpenAIRE

Korotkova, Elena I.; Kratochvíl, B.

2014-01-01

Cocrystals are very interesting and useful product. In this paper the main information about cocrystals is presented. It is shown that cocrystals are solid substances, which consist of few components mixed together. There are a lot of ways of cocrystals production and application. It is shown that cocrystals can be applied in medicine and pharmaceutical industry for improving different properties such as dissolution rate, melting point, solubility, chemical stability etc. Another way of cocry...

Do cost-sharing and entry deregulation curb pharmaceutical innovation?

Science.gov (United States)

Grossmann, Volker

2013-09-01

This paper examines the role of both cost-sharing schemes in health insurance systems and the regulation of entry into the pharmaceutical sector for pharmaceutical R&D expenditure and drug prices. The analysis suggests that both an increase in the coinsurance rate and stricter price regulations adversely affect R&D spending in the pharmaceutical sector. In contrast, entry deregulation may lead to higher R&D spending of pharmaceutical companies. The relationship between R&D spending per firm and the number of firms may be hump-shaped. In this case, the number of rivals which maximizes R&D expenditure per firm is decreasing in the coinsurance rate and increasing in labor productivity. Copyright © 2013 Elsevier B.V. All rights reserved.

Corrosion inhibition of aluminum 6063 using some pharmaceutical compounds

International Nuclear Information System (INIS)

Fouda, A.S.; Al-Sarawy, A.A.; Ahmed, F.Sh.; El-Abbasy, H.M.

2009-01-01

The corrosion inhibition characteristics of some pharmaceutical compounds on aluminum 6063 in 0.5 mol l -1 H 3 PO 4 has been studied using weight loss and galvanostatic polarization techniques. Results showed that the inhibition occurs through adsorption of the inhibitor molecules on the metal surface. The inhibition efficiency increased with increasing inhibitor concentration, but decreased with increasing temperature. The adsorption of first group pharmaceutical compounds on the metal surface is found to obey Frumkin's adsorption isotherm, but the adsorption of second group pharmaceutical compounds is found to obey Temkin's adsorption isotherm. Thermodynamic parameters for adsorption process were determined. Galvanostatic polarization studies showed that first and second groups' pharmaceutical compounds are mixed-type inhibitors and the results obtained from the two techniques are in good agreement

ANALYSIS OF PHARMACEUTICAL COMPANIES’ ACTIVITIES THAT ARE DIRECTED TO PHYSICIANS IN EGYPT

Directory of Open Access Journals (Sweden)

M. M. Bahlol

2016-01-01

Full Text Available Purpose. Pharmaceutical market is one of the largest world markets with its own conditions. In Middle East, Egypt is a major pharmaceutical emerging market and has geographical, historical and political effective leading role among Arab countries. This research aims to investigate pharmaceutical companies’ activities in Egypt directed to physicians.Methodology. Urveying through simple random probability sampling is the approach appropriate for broad and representative overview of situation in research. Therefore, a survey of 1068 physicians was conducted through interviews and establishing structured data collection questionnaire.Originality. This is the first empirical paper to investigate pharmaceutical companies’ activities directed to physicians in pharmaceutical market of Egypt. These activities include identifying pharmaceutical companies through visits of medical representatives, analysis of those visits, frequency of medical representatives’ visits, characteristics of information introduced by medical representatives to physicians, physicians’ trust in provided information, spending of pharmaceutical companies on physicians, promotional techniques applied by medical representatives. These findings are useful for managers in pharmaceutical industry. They can be also useful in other industries such as medical equipment.Findings. Pharmaceutical companies are employing medical representatives widely, as the most effective and widely-applied promotion tool in Egypt.Practical Implications. Coordinate marketing management vision with pharmaceutical market real context will lead to synergism effect in utilizing medical representatives’ activities.

Microbial Removal of the Pharmaceutical Compounds Ibuprofen and Diclofenac from Wastewater

NARCIS (Netherlands)

Langenhoff, A.A.M.; Inderfurth, N.S.; Veuskens, T.; Schraa, G.; Blokland, M.; Kujawa-Roeleveld, K.; Rijnaarts, H.H.M.

2013-01-01

Studies on the occurrence of pharmaceuticals show that the widely used pharmaceuticals ibuprofen and diclofenac are present in relevant concentrations in the environment. A pilot plant treating hospital wastewater with relevant concentrations of these pharmaceuticals was evaluated for its

Public awareness of Pharmaceutical care availability in community ...

African Journals Online (AJOL)

Furthermore, the awareness of availability of pharmaceutical care services in community pharmacies was 3% while 75% of the respondents believed a community pharmacy was just a place drugs can be obtained. As the profession and pharmacists endeavour to improve knowledge and skill to deliver pharmaceutical care ...

East and Central African Journal of Pharmaceutical Sciences

African Journals Online (AJOL)

The East and Central African Journal of Pharmaceutical Sciences is dedicated to all aspects of Pharmaceutical Sciences research and is published in English. The scientific papers published in the Journal fall into three main categories: review papers, original research papers and short communications. Review papers in ...

Fate of pharmaceuticals and pesticides in fly larvae composting

Energy Technology Data Exchange (ETDEWEB)

Lalander, C., E-mail: cecilia.lalander@slu.se [Department of Energy and Technology, Swedish University of Agricultural Sciences (Sweden); Senecal, J.; Gros Calvo, M. [Department of Energy and Technology, Swedish University of Agricultural Sciences (Sweden); Ahrens, L.; Josefsson, S.; Wiberg, K. [Department of Aquatic Sciences and Assessment, Swedish University of Agricultural Sciences (Sweden); Vinnerås, B. [Department of Energy and Technology, Swedish University of Agricultural Sciences (Sweden)

2016-09-15

A novel and efficient organic waste management strategy currently gaining great attention is fly larvae composting. High resource recovery efficiency can be achieved in this closed-looped system, but pharmaceuticals and pesticides in waste could potentially accumulate in every loop of the treatment system and spread to the environment. This study evaluated the fate of three pharmaceuticals (carbamazepine, roxithromycin, trimethoprim) and two pesticides (azoxystrobin, propiconazole) in a fly larvae composting system and in a control treatment with no larvae. It was found that the half-life of all five substances was shorter in the fly larvae compost (< 10% of control) and no bioaccumulation was detected in the larvae. Fly larvae composting could thus impede the spread of pharmaceuticals and pesticides into the environment. - Highlights: • Degradation of pharmaceuticals and pesticides in fly larvae composting (FLC). • Half-life considerably shorter in FLC than in control with no larvae. • Half-life of carbamazepine was less than two days in FLC. • No bioaccumulation in larvae detected. • FLC could impede the spreading of pharmaceuticals and pesticide in the environment.

Fate of pharmaceuticals and pesticides in fly larvae composting

International Nuclear Information System (INIS)

Lalander, C.; Senecal, J.; Gros Calvo, M.; Ahrens, L.; Josefsson, S.; Wiberg, K.; Vinnerås, B.

2016-01-01

A novel and efficient organic waste management strategy currently gaining great attention is fly larvae composting. High resource recovery efficiency can be achieved in this closed-looped system, but pharmaceuticals and pesticides in waste could potentially accumulate in every loop of the treatment system and spread to the environment. This study evaluated the fate of three pharmaceuticals (carbamazepine, roxithromycin, trimethoprim) and two pesticides (azoxystrobin, propiconazole) in a fly larvae composting system and in a control treatment with no larvae. It was found that the half-life of all five substances was shorter in the fly larvae compost (< 10% of control) and no bioaccumulation was detected in the larvae. Fly larvae composting could thus impede the spread of pharmaceuticals and pesticides into the environment. - Highlights: • Degradation of pharmaceuticals and pesticides in fly larvae composting (FLC). • Half-life considerably shorter in FLC than in control with no larvae. • Half-life of carbamazepine was less than two days in FLC. • No bioaccumulation in larvae detected. • FLC could impede the spreading of pharmaceuticals and pesticide in the environment.

Non clinical research at CENTIS supporting biotechnological and pharmaceutical industry

International Nuclear Information System (INIS)

Hernandez Gonzalez, Ignacio

2012-01-01

Drugs production is a highly demanding industry because the rigor of legislations and guidelines. Standards are applied to manufacturing facilities and also to research and development stage. Our national biotechnological industry is developing and producing important medications for diseases like cancer, some of them in the national and international market. Isotopes Centre is an institution supporting such development by means of a work platform to carry out researches in the field of pharmacokinetic and biodistribution in experimental models. Accumulated experience allows us to contribute to research and development of different kind of molecules as pharmaceuticals, specially the biotechnological ones. We are evolving in direction to new technologies and methodologies more suitable to current standards. Radiolabeling is still a convenient choice considering present and new imaging technologies to investigate distribution and kinetic in living subjects. With the techniques we have and the ones to incorporate in a near future, new and more demanding investigations will be affordable. (author)

Multifaceted role of clay minerals in pharmaceuticals

OpenAIRE

Khurana, Inderpreet Singh; Kaur, Satvinder; Kaur, Harpreet; Khurana, Rajneet Kaur

2015-01-01

The desirable physical and physiochemical properties of clay minerals have led them to play a substantial role in pharmaceutical formulations. Clay minerals like kaolin, smectite and palygorskite-sepiolite are among the world's most valuable industrial minerals and of considerable importance. The elemental features of clay minerals which caused them to be used in pharmaceutical formulations are high specific area, sorption capacity, favorable rheological properties, chemical inertness, swelli...

East and Central African Journal of Pharmaceutical Sciences ...

African Journals Online (AJOL)

East and Central African Journal of Pharmaceutical Sciences. 1. Vol. 8(2) 40 - 42. Constituents of the Stem Bark of Dombeya Rotundifolia Hochst. S.N. NDWIGAH*', G.N. THOITHI', J.W. MWANGI~ AND 1.0. KIBWAGE'. 'Department of Pharmaceutical Chemistry, School of Pharmacy, University of Nairobi,. P. 0.

Introductory Level Problems Illustrating Concepts in Pharmaceutical Engineering

Science.gov (United States)

McIver, Keith; Whitaker, Kathryn; De Delva, Vladimir; Farrell, Stephanie; Savelski, Mariano J.; Slater, C. Stewart

2012-01-01

Textbook style problems including detailed solutions introducing pharmaceutical topics at the level of an introductory chemical engineering course have been created. The problems illustrate and teach subjects which students would learn if they were to pursue a career in pharmaceutical engineering, including the unique terminology of the field,…

Decomposition of persistent pharmaceuticals in wastewater by ionizing radiation

International Nuclear Information System (INIS)

Kimura, A.; Taguchi, M.; Osawa, M.

2011-01-01

Complete text of publication follows. The environmental movement and risk evaluation of some pharmaceuticals are studied recently, and the concentrations of the pharmaceuticals in the water environment increased gradually because of population growth and the diversification of advanced medical worldwide. Some anti-inflammatory medications, anticonvulsant drugs, antiviral drugs, antilipemic agents and so on were detected at the downstream of water treatment plant, and could not be decomposed by the activated sludge system completely. However, it is difficult to manage the environment risk of the pharmaceuticals having great benefits for human life. The development of new treatment method is required to minimized their risk. The purpose of this work is to treat the pharmaceuticals in combination of the activated sludge and the ionizing radiation. Oseltamivir, aspirin and ibuprofen at 5 μmol dm -3 in wastewater were decomposed by activated sludge at reaction time for 4 h. Carbamazepine, ketoprofen, mefenamic acid, clofibric acid, and diclofenac were not biodegraded completely, but eliminated by γ-ray irradiation at 2 kGy. The rate constants of the reactions of these pharmaceuticals with hydroxyl radicals produced by water radiolysis were estimated by the competition reaction method to be 3.4 - 10 x 10 9 mol -1 dm 3 s -1 . Decompositions of the pharmaceuticals in wastewater by ionizing radiation were simulated using parameters of the obtained rate constants and the amount of total organic carbon. Simulation curves of concentrations of these pharmaceuticals as function of dose were responsible for the experimental data, and the required dose for the elimination of them in wastewater by ionizing radiation can be estimated by this simulation.

Pharmaceutical expenditure forecast model to support health policy decision making

Science.gov (United States)

Rémuzat, Cécile; Urbinati, Duccio; Kornfeld, Åsa; Vataire, Anne-Lise; Cetinsoy, Laurent; Aballéa, Samuel; Mzoughi, Olfa; Toumi, Mondher

2014-01-01

Background and objective With constant incentives for healthcare payers to contain their pharmaceutical budgets, modelling policy decision impact became critical. The objective of this project was to test the impact of various policy decisions on pharmaceutical budget (developed for the European Commission for the project ‘European Union (EU) Pharmaceutical expenditure forecast’ – http://ec.europa.eu/health/healthcare/key_documents/index_en.htm). Methods A model was built to assess policy scenarios’ impact on the pharmaceutical budgets of seven member states of the EU, namely France, Germany, Greece, Hungary, Poland, Portugal, and the United Kingdom. The following scenarios were tested: expanding the UK policies to EU, changing time to market access, modifying generic price and penetration, shifting the distribution chain of biosimilars (retail/hospital). Results Applying the UK policy resulted in dramatic savings for Germany (10 times the base case forecast) and substantial additional savings for France and Portugal (2 and 4 times the base case forecast, respectively). Delaying time to market was found be to a very powerful tool to reduce pharmaceutical expenditure. Applying the EU transparency directive (6-month process for pricing and reimbursement) increased pharmaceutical expenditure for all countries (from 1.1 to 4 times the base case forecast), except in Germany (additional savings). Decreasing the price of generics and boosting the penetration rate, as well as shifting distribution of biosimilars through hospital chain were also key methods to reduce pharmaceutical expenditure. Change in the level of reimbursement rate to 100% in all countries led to an important increase in the pharmaceutical budget. Conclusions Forecasting pharmaceutical expenditure is a critical exercise to inform policy decision makers. The most important leverages identified by the model on pharmaceutical budget were driven by generic and biosimilar prices, penetration rate

Transdermal and intradermal delivery of therapeutic agents: application of physical technologies

National Research Council Canada - National Science Library

Banga, Ajay K

2011-01-01

.... Commercialization of transdermal drug delivery requires technology from many disciplines beyond pharmaceutical sciences, such as polymer chemistry, adhesion sciences, mass transport, web film coating...

Pharmaceutical cocrystals:formation mechanisms, solubility behaviour and solid-state properties

OpenAIRE

Alhalaweh, Amjad

2012-01-01

The primary aim of pharmaceutical materials engineering is the successful formulation and process development of pharmaceutical products. The diversity of solid forms available offers attractive opportunities for tailoring material properties. In this context, pharmaceutical cocrystals, multicomponent crystalline materials with definite stoichiometries often stabilised by hydrogen bonding, have recently emerged as interesting alternative solid forms with potential for improving the physical a...

Occurrence, sources, and fate of pharmaceuticals in aquatic environment and soil.

Science.gov (United States)

Li, W C

2014-04-01

With the rapid economic development, a better living condition leads to longer life expectancy, which increased the total population, in particular the elderly group. It may result in increase in the demand of pharmaceuticals for people in domestic use or in hospital. Although most sewage treatment plants or waste water treatment plantsmet the regulatory requirement, there are still many pharmaceuticals removed incompletely and thus discharged to the environment. Therefore, the pharmaceuticals residue draws the public concern because they might cause adverse effects on the organism even human beings. Recently, many studies have published on the source and occurrence as well as the fate of pharmaceuticals all over the world. This paper summarized and reviewed the recent studies on the sources, occurrence, fate and the effects of the most common pharmaceuticals. Finally, it gave the suggestion and risk management for controlling the pharmaceuticals. Copyright © 2014 Elsevier Ltd. All rights reserved.

Technology of extraction by solvent in pulsed columns

International Nuclear Information System (INIS)

Ros, P.

1992-01-01

Since its creation, the CEA (Commissariat a l'energie atomique) has produced several separation processes for natural or enriched uranium treatment and the treatment of spent fuels coming from nuclear reactors. Among these technologies, extraction by solvent is broadly used for separation and purification of nuclear matters. This technology can be used for other applications as hydrometallurgy, chemistry, pharmaceutics, depollution, agro-industry

Resumed Publication of Pharmaceuticals in 2009

Directory of Open Access Journals (Sweden)

Shu-Kun Lin

2009-04-01

Full Text Available After a five year hiatus, we are pleased to announce the resumption of publication of the MDPI journal Pharmaceuticals (ISSN 1424-8247. First launched in 2004, few suitable papers were submitted and only one was published [1], before our limited editorial resources at the time led us to temporarily discontinue publication. Several things have changed since then. First, there has been an explosive growth in the number of manuscripts submitted and published in MDPI’s various current journals [2], whose topics clearly fall within the intended scope of Pharmaceuticals and we feel that these manuscripts merit a dedicated forum. Second, the expansion of MDPI, now with Editorial Offices and staff in Basel (Switzerland and Beijing (China, allows us to provide Pharmaceuticals’ authors with all the services they could desire and deserve: a simple manuscript submission process, rigorous peer review, quick revision turnaround, Open Access publication on a new and attractive platform and coverage by all the major abstracting services. In addition, a new Editorial Board comprised of noted academic and industry scientists has been set up for Pharmaceuticals. Finally, to better focus the subject matter published in Pharmaceuticals on molecular medicines, we have also set up a special section in International Journal of Molecular Sciences (IJMS, ISSN 1422-0067 for papers on nutraceuticals or chemopreventives. We look forward to receiving and publishing your papers and as always, we welcome your comments and suggestions.

Provision of pharmaceutical care by community pharmacists across Europe

DEFF Research Database (Denmark)

Costa, Filipa A; Scullin, Claire; Al-Taani, Ghaith

2017-01-01

RATIONALE, AIMS, AND OBJECTIVES: Pharmaceutical care involves patient-centred pharmacist activity to improve medicines management by patients. The implementation of this service in a comprehensive manner, however, requires considerable organisation and effort, and indeed, it is often not fully...... implemented in care settings. The main objective was to assess how pharmaceutical care provision within community pharmacy has evolved over time in Europe. METHOD: A cross-sectional questionnaire-based survey of community pharmacies, using a modified version of the Behavioural Pharmaceutical Care Scale (BPCS......) was conducted in late 2012/early 2013 within 16 European countries and compared with an earlier assessment conducted in 2006. RESULTS: The provision of comprehensive pharmaceutical care has slightly improved in all European countries that participated in both editions of this survey (n = 8) with progress being...

Cross-Linked Hydrogel for Pharmaceutical Applications: A Review

Directory of Open Access Journals (Sweden)

Rabinarayan parhi

2017-12-01

Full Text Available Hydrogels are promising biomaterials because of their important qualities such as biocompatibility, biodegradability, hydrophilicity and non-toxicity. These qualities make hydrogels suitable for application in medical and pharmaceutical field. Recently, a tremendous growth of hydrogel application is seen, especially as gel and patch form, in transdermal drug delivery. This review mainly focuses on the types of hydrogels based on cross-linking and; secondly to describe the possible synthesis methods to design hydrogels for different pharmaceutical applications. The synthesis and chemistry of these hydrogels are discussed using specific pharmaceutical examples. The structure and water content in a typical hydrogel have also been discussed.

Pharmaceutical packaging handbook

National Research Council Canada - National Science Library

Bauer, Edward J

2009-01-01

... of the modern world. Pharmaceutical products and health care in developing countries and remote parts of the world seems like magic. Diseases that were once fatal and chronic conditions that destroyed lives have slowly been conquered by modern medicine. Views of the body, unimaginable for most of the last century with X rays, are now possible with new i...

Healthcare systems, the State, and innovation in the pharmaceutical industry

Directory of Open Access Journals (Sweden)

Ignacio José Godinho Delgado

Full Text Available Abstract: This article discusses the relations between healthcare systems and the pharmaceutical industry, focusing on state support for pharmaceutical innovation. The study highlights the experiences of the United States, United Kingdom, and Germany, developed countries and paradigms of modern health systems (liberal, universal, and corporatist, in addition to Japan, a case of successful catching up. The study also emphasizes the experiences of China, India, and Brazil, large developing countries that have tried different catching up strategies, with diverse histories and profiles in their healthcare systems and pharmaceutical industries. Finally, with a focus on state forms of support for health research, the article addresses the mechanisms for linkage between health systems and the pharmaceutical industry, evaluating the possibilities of Brazil strengthening a virtuous interaction, favoring the expansion and consolidation of the Brazilian health system - universal but segmented ‒ and the affirmation of the innovative national pharmaceutical industry.

Practices of pharmaceutical waste generation and discarding in households across Portugal.

Science.gov (United States)

Dias-Ferreira, Celia; Valente, Susana; Vaz, João

2016-10-01

This work is the first nationwide study in Portugal on pharmaceutical waste generated at households, exploring people's attitudes and risk perception. The waste audit was carried out from September to November 2014, targeting pharmaceutical products kept by a sample of families (n = 244). This campaign was an assignment of VALORMED, the non-profit association that manages waste and packaging from expired and unused pharmaceutical products collected by the pharmacies. On average, each household kept at home 1097 g of pharmaceutical products, of which 20% were in use, 72% were not in use, and 8% were mostly expired products ready to discard. Face-to-face interviews with householders showed that 69% of the respondents claimed returning pharmaceutical waste to the local pharmacy. However, this figure is overrated, probably owing to a possible 'good answer' effect. The barriers identified to proper disposal were mainly established routines and lack of close disposal points. This study also provides an insight into the Portuguese awareness and daily practices concerning pharmaceutical waste, which is the cornerstone of any future strategy to reduce the release of active pharmaceutical ingredients into ecosystems. © The Author(s) 2016.

77 FR 16264 - Manufacturer of Controlled Substances, Notice of Registration; Johnson Matthey Pharmaceutical...

Science.gov (United States)

2012-03-20

..., Notice of Registration; Johnson Matthey Pharmaceutical Materials Inc. By Notice dated November 18, 2011... Pharmaceutical Materials Inc., Pharmaceutical Service, 25 Patton Road, Devens, Massachusetts 01434, made... Matthey Pharmaceutical Materials Inc. to manufacture the listed basic classes of controlled substances is...

Nuclear industry technology boomerang

International Nuclear Information System (INIS)

Scholler, R.W.

1987-01-01

The benefits to the medical, pharmaceutical, semiconductor, computer, video, bioscience, laser, defense, and numerous high-tech industries from nuclear technology development fallout are indeed numerous and increase every day. Now those industries have made further progress and improvements that, in return, benefit the nuclear industry. The clean-air and particle-free devices and enclosures needed for protection and decontamination are excellent examples

The synthesis of active pharmaceutical ingredients (APIs using continuous flow chemistry

Directory of Open Access Journals (Sweden)

Marcus Baumann

2015-07-01

Full Text Available The implementation of continuous flow processing as a key enabling technology has transformed the way we conduct chemistry and has expanded our synthetic capabilities. As a result many new preparative routes have been designed towards commercially relevant drug compounds achieving more efficient and reproducible manufacture. This review article aims to illustrate the holistic systems approach and diverse applications of flow chemistry to the preparation of pharmaceutically active molecules, demonstrating the value of this strategy towards every aspect ranging from synthesis, in-line analysis and purification to final formulation and tableting. Although this review will primarily concentrate on large scale continuous processing, additional selected syntheses using micro or meso-scaled flow reactors will be exemplified for key transformations and process control. It is hoped that the reader will gain an appreciation of the innovative technology and transformational nature that flow chemistry can leverage to an overall process.

The synthesis of active pharmaceutical ingredients (APIs) using continuous flow chemistry.

Science.gov (United States)

Baumann, Marcus; Baxendale, Ian R

2015-01-01

The implementation of continuous flow processing as a key enabling technology has transformed the way we conduct chemistry and has expanded our synthetic capabilities. As a result many new preparative routes have been designed towards commercially relevant drug compounds achieving more efficient and reproducible manufacture. This review article aims to illustrate the holistic systems approach and diverse applications of flow chemistry to the preparation of pharmaceutically active molecules, demonstrating the value of this strategy towards every aspect ranging from synthesis, in-line analysis and purification to final formulation and tableting. Although this review will primarily concentrate on large scale continuous processing, additional selected syntheses using micro or meso-scaled flow reactors will be exemplified for key transformations and process control. It is hoped that the reader will gain an appreciation of the innovative technology and transformational nature that flow chemistry can leverage to an overall process.

Application of Incoherent Inelastic Neutron Scattering in Pharmaceutical Analysis

DEFF Research Database (Denmark)

Bordallo, Heloisa N.; A. Zakharov, Boris; Boidyreva, E.V.

2012-01-01

This study centers on the use of inelastic neutron scattering as an alternative tool for physical characterization of solid pharmaceutical drugs. On the basis of such approach, relaxation processes in the pharmaceutical compound phenacetin (p-ethoxyacetanilide, C(10)H(13)NO(2)) were evidenced...... contributes to understanding the relationships between intermolecular hydrogen bonds, intramolecular dynamics, and conformational flexibility in pharmaceuticals on a molecular level, which can help in evaluating phase stability with respect to temperature variations on processing or on storage, and is related...

Pharmaceutical health care and Inuit language communications in Nunavut, Canada

OpenAIRE

Romain, Sandra J.

2013-01-01

Background. Pharmaceutical communication is an essential component of pharmaceutical health care, optimally ensuring patients understand the proper administration and side effects of their medications. Communication can often be complicated by language and culture, but with pharmaceuticals, misunderstandings can prove particularly harmful. In Nunavut, to ensure the preservation and revitalization of Inuit languages, the Inuit Language Protection Act and Official Languages Act were passed requ...

Preconditions of forming of loyalty management model in pharmaceutical institution

Directory of Open Access Journals (Sweden)

O. O. Molodozhonova

2013-04-01

Full Text Available The first stage of the mechanism for implementing of two-level model of efficient management of loyalty was justified. It is based on the fundamental value systems of the formation of consumer commitment and institutional commitment of pharmaceutical professionals. The stage involves recruitment, selection and adaptation period for pharmaceutical professionals and pre-use of axiological questioning of consumers of pharmaceutic goods.

Nanogels for Pharmaceutical and Biomedical Applications and Their Fabrication Using 3D Printing Technologies

Science.gov (United States)

Cho, Hyunah; Jammalamadaka, Udayabhanu

2018-01-01

Nanogels are hydrogels formed by connecting nanoscopic micelles dispersed in an aqueous medium, which give an opportunity for incorporating hydrophilic payloads to the exterior of the micellar networks and hydrophobic payloads in the core of the micelles. Biomedical and pharmaceutical applications of nanogels have been explored for tissue regeneration, wound healing, surgical device, implantation, and peroral, rectal, vaginal, ocular, and transdermal drug delivery. Although it is still in the early stages of development, due to the increasing demands of precise nanogel production to be utilized for personalized medicine, biomedical applications, and specialized drug delivery, 3D printing has been explored in the past few years and is believed to be one of the most precise, efficient, inexpensive, customizable, and convenient manufacturing techniques for nanogel production. PMID:29462901

Novel methodology for pharmaceutical expenditure forecast.

Science.gov (United States)

Vataire, Anne-Lise; Cetinsoy, Laurent; Aballéa, Samuel; Rémuzat, Cécile; Urbinati, Duccio; Kornfeld, Åsa; Mzoughi, Olfa; Toumi, Mondher

2014-01-01

The value appreciation of new drugs across countries today features a disruption that is making the historical data that are used for forecasting pharmaceutical expenditure poorly reliable. Forecasting methods rarely addressed uncertainty. The objective of this project was to propose a methodology to perform pharmaceutical expenditure forecasting that integrates expected policy changes and uncertainty (developed for the European Commission as the 'EU Pharmaceutical expenditure forecast'; see http://ec.europa.eu/health/healthcare/key_documents/index_en.htm). 1) Identification of all pharmaceuticals going off-patent and new branded medicinal products over a 5-year forecasting period in seven European Union (EU) Member States. 2) Development of a model to estimate direct and indirect impacts (based on health policies and clinical experts) on savings of generics and biosimilars. Inputs were originator sales value, patent expiry date, time to launch after marketing authorization, price discount, penetration rate, time to peak sales, and impact on brand price. 3) Development of a model for new drugs, which estimated sales progression in a competitive environment. Clinical expected benefits as well as commercial potential were assessed for each product by clinical experts. Inputs were development phase, marketing authorization dates, orphan condition, market size, and competitors. 4) Separate analysis of the budget impact of products going off-patent and new drugs according to several perspectives, distribution chains, and outcomes. 5) Addressing uncertainty surrounding estimations via deterministic and probabilistic sensitivity analysis. This methodology has proven to be effective by 1) identifying the main parameters impacting the variations in pharmaceutical expenditure forecasting across countries: generics discounts and penetration, brand price after patent loss, reimbursement rate, the penetration of biosimilars and discount price, distribution chains, and the time

Modeling of Pharmaceutical Biotransformation by Enriched Nitrifying Culture under Different Metabolic Conditions

DEFF Research Database (Denmark)

Xu, Yifeng; Chen, Xueming; Yuan, Zhiguo

2018-01-01

Pharmaceutical removal could be significantly enhanced through cometabolism during nitrification processes. To date, pharmaceutical biotransformation models have not considered the formation of transformation products associated with the metabolic type of microorganisms. Here we report a comprehe......Pharmaceutical removal could be significantly enhanced through cometabolism during nitrification processes. To date, pharmaceutical biotransformation models have not considered the formation of transformation products associated with the metabolic type of microorganisms. Here we report...... a comprehensive model to describe and evaluate the biodegradation of pharmaceuticals and the formation of their biotransformation products by enriched nitrifying cultures. The biotransformation of parent compounds was linked to the microbial processes via cometabolism induced by ammonium-oxidizing bacteria (AOB......) growth, metabolism by AOB, cometabolism by heterotrophs (HET) growth, and metabolism by HET in the model framework. The model was calibrated and validated using experimental data from pharmaceutical biodegradation experiments at realistic levels, taking two pharmaceuticals as examples, i.e., atenolol...

Informed consent: Enforcing pharmaceutical companies' obligations abroad.

Science.gov (United States)

Lee, Stacey B

2010-06-15

The past several years have seen an evolution in the obligations of pharmaceutical companies conducting clinical trials abroad. Key players, such as international human rights organizations, multinational pharmaceutical companies, the United States government and courts, and the media, have played a significant role in defining these obligations. This article examines how such obligations have developed through the lens of past, present, and future recommendations for informed consent protections. In doing so, this article suggests that, no matter how robust obligations appear, they will continue to fall short of providing meaningful protection until they are accompanied by a substantive enforcement mechanism that holds multinational pharmaceutical companies accountable for their conduct. Issues of national sovereignty, particularly in the United States, will continue to prevent meaningful enforcement by an international tribunal or through one universally adopted code of ethics. This article argues that, rather than continuing to pursue an untenable international approach, the Alien Torts Statute (ATS) offers a viable enforcement mechanism, at least for US-based pharmaceutical companies. Recent federal appellate court precedent interpreting the ATS provides the mechanism for granting victims redress and enforcing accountability of sponsors (usually pharmaceutical companies and research and academic institutions) for informed consent misconduct. Substantive human rights protections are vital in order to ensure that every person can realize the "right to health." This article concludes that by building on the federal appellate court's ATS analysis, which grants foreign trial participants the right to pursue claims of human rights violations in US courts, a mechanism can be created for enforcing not only substantive informed consent, but also human rights protections.

Studying and evaluating pharmaceutical policy--becoming a part of the policy and consultative process

DEFF Research Database (Denmark)

Almarsdóttir, Anna Birna; Traulsen, Janine Marie

2006-01-01

In this last article in the series the authors focus on the issue of researching and evaluating pharmaceutical policy. The past five articles made an argument for why pharmaceutical policy is important and why it is different from health policy. The evidence base needed for pharmaceutical policym...... culture around pharmaceutical policy. They emphasize the importance of pharmaceutical specialists' (i.e., pharmacists') involvement in pharmaceutical policy analysis and the policy consultative process....

Nano spray drying for encapsulation of pharmaceuticals.

Science.gov (United States)

Arpagaus, Cordin; Collenberg, Andreas; Rütti, David; Assadpour, Elham; Jafari, Seid Mahdi

2018-05-17

Many pharmaceuticals such as pills, capsules, or tablets are prepared in a dried and powdered form. In this field, spray drying plays a critical role to convert liquid pharmaceutical formulations into powders. In addition, in many cases it is necessary to encapsulate bioactive drugs into wall materials to protect them against harsh process and environmental conditions, as well as to deliver the drug to the right place and at the correct time within the body. Thus, spray drying is a common process used for encapsulation of pharmaceuticals. In view of the rapid progress of nanoencapsulation techniques in pharmaceutics, nano spray drying is used to improve drug formulation and delivery. The nano spray dryer developed in the recent years provides ultrafine powders at nanoscale and high product yields. In this paper, after explaining the concept of nano spray drying and understanding the key elements of the equipment, the influence of the process parameters on the final powders properties, like particle size, morphology, encapsulation efficiency, drug loading and release, will be discussed. Then, numerous application examples are reviewed for nano spray drying and encapsulation of various drugs in the early stages of product development along with a brief overview of the obtained results and characterization techniques. Copyright © 2018 Elsevier B.V. All rights reserved.

Continuous manufacturing of active pharmaceutical ingredients via flow technology

NARCIS (Netherlands)

Borukhova, S.; Hessel, V.; Kleinbudde, P.; Khinast, J.; Rantanen, J.

2017-01-01

The main drivers to implement continuous manufacturing are aspects related to logistics, quality of the final product, chemistry to be implemented, process and safety concerns. Flow technology offers a platform to realize those drivers. This chapter introduces the reader to a relatively new

Russian Pharmaceutical Companies Export Potential in Emerging Regional Clusters

Directory of Open Access Journals (Sweden)

Elena Vladimirovna Sapir

2016-12-01

Full Text Available This article analyzes a diverse range of the enterprise’s export potential growth factors in emerging pharmaceutical clusters of Central European Russia. Classification and comparative analysis were used to identify export potential attributes (production, finance, labor and marketing, which have allowed to reveal the strong connection of cluster and regional factor groups with the results of export performance. The purpose of the study is to provide exports-seeking pharmaceutical companies with a set of tools to enhance their export potential. The hypothesis that the cumulative impact of the specified attributes leads to the strengthening of pharmaceutical cluster export potential and promotes an effective integration of the region in the world economic space, is developed and tested. The methodology combines the geo-economy-based theory with the theory of clusters competitive advantages. The impacts of export potential growth factors are estimated by using an econometric model based on math statistics. Thus, five Russian regional pharmaceutical clusters (Belgorod, Kaluga, Moscow, Oryol, Yaroslavl are shown. Findings identify an objective causal link between enterprise export potential growth and competitiveness factors of cluster origin (network business chains, production functions interconnectedness and flexibility, production localization. An action plan for the purpose of the maximum use of competitive advantages of the cluster organization for export activities of the entities of the pharmaceutical industry is developed. Conclusions and recommendations of the study are intended to enterprises in pharmaceutical industry and regions’ public authorities, implementing cluster development strategies. It is thus essential to improve marketing and organizational innovations, reduction of commercial expenses under the cluster environment, development of drugs production and delivery chains from R&D to end-users in order to enjoy greater

[The pharmaceutical market in Mexico: size, value, and concentration].

Science.gov (United States)

Torres Guerra, Sandra; Gutiérrez, Juan Pablo

2009-07-01

To describe the pharmaceutical drug market in Mexico in terms of its size, structure, business' market power, and consumer negotiating power. A descriptive study based on data from the 2004 Economics Census and the reports of IMS Health, Inc. (Norwalk, Connecticut, United States of America). Sales amounts and volumes of Mexico's pharmaceutical companies from 2002-2005 were obtained and the Herfindahl-Hirschman Index (HHI) and its inverse were calculated as indicators of the market's degree of concentration; also, price elasticity was determined by a product index. The total value of the products manufactured by the pharmaceutical sector was 115 billion in 2006 Mexican pesos, of which 99% pertained to companies categorized as large. This amount constituted 1.2% of the national gross domestic product that year (20.0% of the health sector's portion, estimated to be 6.0%) and 3.9% of the total value of manufactured goods. The HHI of Mexico's pharmaceutical market during the study period was about 0.04, albeit with a steady decline, and its inverse decreased from 23 to 26. The price elasticity of pharmaceutical products was minimal (0.007, 0.003, and -0.002). This study constitutes a preliminary description of Mexico's pharmaceutical market, one of the country's most dynamic economic sectors. It confirmed that the market is a rigid oligopoly, and thus supports enactment of firmer regulatory tools to reduce the power of the manufacturers in favor of that of the consumers.

Modified Transdermal Technologies: Breaking the Barriers of Drug ...

African Journals Online (AJOL)

In-depth analysis, formulation approaches, applications, advantages and disadvantages of these newer technologies are discussed. Keywords: Transdermal drug delivery, microneedles, macroflux, iontophoresis, ultrasound, powderject, skin abrasion. > Tropical Journal of Pharmaceutical Research Vol. 6 (1) 2007: pp. 633- ...

The Purpose and Scope of Pedagogy in Pharmaceutical Education.

Science.gov (United States)

Nakamura, Akihiro

2017-01-01

The WHO and International Pharmaceutical Federation (FIP) introduced the concept of the "seven-star pharmacist" in which a pharmacist is described as a caregiver, communicator, decision-maker, teacher, lifelong learner, leader and manager. In six-year pharmaceutical education programs, which have been provided in schools of pharmacy since 2006, 5th year students participate in on-site practice experiences in hospitals and community pharmacies. Thus, Japanese pharmacists also began to have a role in pharmaceutical education as teachers in clinical settings. Not only pharmacists in clinical settings, but also faculty members of pharmacy schools, had not previously been familiar with evidence-based education, and therefore they often teach in the way they were taught. Since research on teaching and learning has not been well developed in Japanese pharmaceutical education, both the model core curriculum for six-year programs and the subject benchmark statement for four-year programs are based on insufficient scientific evidence. We should promote the scholarship of teaching and learning, which promotes teaching as a scholarly endeavor and a worthy subject for research. In this review, I will summarize the needs and expectations for the establishment of pedagogy in pharmaceutical education.

Quantitative magnetic resonance micro-imaging methods for pharmaceutical research.

Science.gov (United States)

Mantle, M D

2011-09-30

The use of magnetic resonance imaging (MRI) as a tool in pharmaceutical research is now well established and the current literature covers a multitude of different pharmaceutically relevant research areas. This review focuses on the use of quantitative magnetic resonance micro-imaging techniques and how they have been exploited to extract information that is of direct relevance to the pharmaceutical industry. The article is divided into two main areas. The first half outlines the theoretical aspects of magnetic resonance and deals with basic magnetic resonance theory, the effects of nuclear spin-lattice (T(1)), spin-spin (T(2)) relaxation and molecular diffusion upon image quantitation, and discusses the applications of rapid magnetic resonance imaging techniques. In addition to the theory, the review aims to provide some practical guidelines for the pharmaceutical researcher with an interest in MRI as to which MRI pulse sequences/protocols should be used and when. The second half of the article reviews the recent advances and developments that have appeared in the literature concerning the use of quantitative micro-imaging methods to pharmaceutically relevant research. Copyright © 2010 Elsevier B.V. All rights reserved.

Fate of pharmaceutical compounds in hydroponic mesocosms planted with Scirpus validus

International Nuclear Information System (INIS)

Zhang, Dong Qing; Gersberg, Richard M.; Hua, Tao; Zhu, Junfei; Goyal, Manish Kumar; Ng, Wun Jern; Tan, Soon Keat

2013-01-01

A systematic approach to assess the fate of selected pharmaceuticals (carbamazepine, naproxen, diclofenac, clofibric acid and caffeine) in hydroponic mesocosms is described. The overall objective was to determine the kinetics of depletion (from solution) and plant uptake for these compounds in mesocosms planted with S. validus growing hydroponically. The potential for translocation of these pharmaceuticals from the roots to the shoots was also assessed. After 21 days of incubation, nearly all of the caffeine, naproxen and diclofenac were eliminated from solution, whereas carbamazepine and clofibric acid were recalcitrant to both photodegradation and biodegradation. The fact that the BAFs for roots for carbamazepine and clofibric acid were greater than 5, while the BAFs for naproxen, diclofenac and caffeine were less than 5, implied that the latter two compounds although recalcitrant to biodegradation, still had relatively high potential for plant uptake. Naproxen was sensitive to both photodegradation (30–42%) and biodegradation (>50%), while diclofenac was particularly sensitive (>70%) to photodegradation alone. No significant correlations (p > 0.05) were found between the rate constants of depletion or plant tissue levels of the pharmaceuticals and either log K ow or log D ow . -- Highlights: •All of pharmaceuticals were removed from solution efficiently after 21 d of incubation. •Effects of photodegradation and biodegradation on pharmaceutical removal were studied. •The pharmaceutical concentrations in the plant tissues were detected. •No correlation was found between pharmaceutical levels in plant tissues and log K ow or log D ow . •Log K ow is the most significant parameter for predicting pharmaceutical levels. -- All the tested pharmaceuticals (carbamazepine, naproxen, diclofenac, clofibric acid and caffeine) were efficiently removed from nutrient solution

New Product Introduction in the Pharmaceutical Industry

DEFF Research Database (Denmark)

Hansen, Klaus Reinholdt Nyhuus

Due to the limited time of the monopoly provided by patent protection that is used for recouping the R&D investment, pharmaceutical companies focus on keeping time-to-market for new products as short as possible. This process is however getting more uncertain, as the outcome of clinical trials...... is unknown and negotiations with authorities have become harder, making market introduction more difficult. This dissertation treats the new product introduction process in the pharmaceutical industry from an operations perspective. The overarching aim of this dissertation is to improve the planning...... uncertainty and several important industry characteristics. The model is used to gain several insights on the use of risk packaging and on keeping time-to-market short. As capacity in secondary pharmaceutical production is critical for product availability, a capacity planning model for a new drug delivery...

In Defense of Pharmaceutically Enhancing Human Morality.

Science.gov (United States)

Protopapadakis, Evangelos D

2017-01-01

I will discuss the prospect of pharmaceutically enhancing human morality and decision making in such a way as to eliminate morally unjustifiable choices and promote desirable ones. Our species in the relatively short period since it has emerged has enormously advanced in knowledge, science, and technical progress. When it comes to moral development, the distance it has covered is almost negligible. What if we could medically accelerate our moral development? What if we could once and for all render our species totally immune to certain vices? I will examine whether pharmaceutically intervening in human morality would compromise the autonomy of moral agents. I will argue that the argument from the autonomy of the moral agent is neither stable nor convincing. In the light of Kantian ethics we might consider moral enhancement by pharmaceutical means to be a perfect duty for moral agents.

Recent advances in the application of transmission Raman spectroscopy to pharmaceutical analysis.

Science.gov (United States)

Buckley, Kevin; Matousek, Pavel

2011-06-25

This article reviews recent advances in transmission Raman spectroscopy and its applications, from the perspective of pharmaceutical analysis. The emerging concepts enable rapid non-invasive volumetric analysis of pharmaceutical formulations and could lead to many important applications in pharmaceutical settings, including quantitative bulk analysis of intact pharmaceutical tablets and capsules in quality and process control. Crown Copyright © 2010. Published by Elsevier B.V. All rights reserved.

[Attitudes of general practitioners to pharmaceutical sales representatives in Sousse].

Science.gov (United States)

Ben Abdelaziz, A; Harrabi, I; Rahmani, S; Ghedira, A; Gaha, K; Ghannem, H

2003-01-01

The therapeutic knowledge of physicians is the corner stone to the rational use of medicines; however information about medicines is generally obtained from the pharmaceutical industry via their sales representatives (reps). We aimed to identify general practitioners' (GPs) attitudes to pharmaceutical reps and the information they provide. We surveyed 140 GPs using a self-administered questionnaire. The response rate was 78% (72 GPs from the public sector and 68 from the private sector). About 10% of the GPs said they received daily visits from pharmaceutical reps; 84% of GPs considered them an efficient source of information and 31% said they might change their therapeutic prescribing following visits from these reps. Because of their positive perception of pharmaceutical reps, GPs are susceptible to the information they provide. Controlling the validity of the therapeutic information imparted by the pharmaceutical industry is thus a fundamental component of the programme for the rational use of medicines.

Radiation sterilization of pharmaceuticals: An overview of the literature

International Nuclear Information System (INIS)

Razem, D.

2008-01-01

Radiation sterilization of pharmaceuticals has never stopped attracting the attention of researchers. In this first as yet unfinished decade of the twenty-first century, the number of relevant papers seems to be on the rise again. In developing radiation sterilization of pharmaceuticals and searching for innovative applications, it is important to understand the end users, i.e. the pharmaceutical and medical professions. Mutual understanding between professions has already resulted in a plethora of products for enhancing, preserving and curing health, and many more are waiting to be discovered

Probabilistic environmental risk characterization of pharmaceuticals in sewage treatment plant discharges.

Science.gov (United States)

Christensen, Anne Munch; Markussen, Bo; Baun, Anders; Halling-Sørensen, Bent

2009-10-01

The occurrence of pharmaceuticals in different water bodies and the findings of effects on aquatic organisms in ecotoxicity tests have raised concerns about environmental risks of pharmaceuticals in receiving waters. Due to the fact that the amount of ecotoxicological studies has increased significantly during the last decade, probabilistic approaches for risk characterization of these compounds may be feasible. This approach was evaluated by applying it to 22 human-used pharmaceuticals covering both pharmaceuticals with a high volume and high ecotoxicity, using ecotoxicological effect data from laboratory studies and comparing these to monitoring data on the effluents from sewage treatment plants in Europe and pharmaceutical sales quantities. We found that for 19 of the 22 selected pharmaceuticals the existing data were sufficient for probabilistic risk characterizations. The subsequently modeled ratios between monitored concentrations and low-effect concentrations were mostly above a factor of 100. Compared to the current paradigm for EU environmental risk assessment where a safety factor of 10 or 100 might have been used it seems that for the modeled compounds there's a low environmental risk. However, similarly calculated ratios for five pharmaceuticals (propranolol, ibuprofen, furosemide, ofloxacin, and ciprofloxacin) were below 100, while ibuprofen and ciprofloxacin are considered to be of high concern due to lack of ecotoxicity studies. This paper shows that by applying probabilistic approaches, existing data can be used to execute a comprehensive study on probability of impacts, thereby contributing to a more comprehensive environmental risk assessment of pharmaceuticals.

Parallel imports and innovation in an emerging economy: the case of Indian pharmaceuticals.

Science.gov (United States)

Mantovani, Andrea; Naghavi, Alireza

2012-11-01

This paper studies the impact of the re-importation of imitated pharmaceuticals as a by-product of an open policy toward parallel import (PI) on process innovation. Foreign investment by a firm to exploit a new unregulated market with weak intellectual property rights can give rise to imitation. These products can potentially re-enter the original country when PI is allowed influencing research and development (R&D) incentives. In an emerging economy with technologically heterogeneous firms, trade costs shift PI-related market share losses from the more to the less R&D efficient firm, inducing the former to strategically increase R&D. PI accompanied by tariffs also induces higher R&D effort by the technologically inferior firm when it results in an expansion of its sales abroad. A tariff on PI is most likely to increase welfare when the technological gap between the two firms at home is sufficiently large. Copyright © 2011 John Wiley & Sons, Ltd.

ANALYSIS OF THE PERSONNEL POTENTIAL EFFICIENCY OF THE PHARMACEUTICAL INSTITUTION

Directory of Open Access Journals (Sweden)

Марина Юрьевна Клищенко

2017-03-01

The study revealed common patterns of the personnel potential efficiency of the pharmaceutical institution. It was found that pharmaceutical institutions need qualified professionals with a high level of practical training, ready to immediately join the working process. It was noted that only 47 % of graduates are prepared to work in the specialty chosen. We studied the length of employment with one employer. The analysis of the main problems making pharmaceutical professionals to change their work is performed. During the questioning of pharmaceutical students it was noted that a large number of students (32,89 % feel uncertainty about their further employment and 47 % of respondents are going to work in the profession.