WorldWideScience

Sample records for technology perspectives volume

  1. Technologies for adaptation. Perspectives and practical experiences; Climate change

    Energy Technology Data Exchange (ETDEWEB)

    Christiansen, Lars; Olhoff, A; Traerup, S

    2011-11-15

    The present report is the second volume of the UNEP Risoe Centre Technology Transfer Perspectives Series. The report is related to the global Technology Needs Assessment (TNA) project, financed by the Global Environment Facility (GEF) and implemented by UNEP Risoe Centre. The nine articles in this volume discuss issues like: a) the concepts and context of technologies for adaptation; b) assessments of adaptation technology needs; c) practical experiences from working with technologies for adaptation. (LN)

  2. Science and technology perspective

    International Nuclear Information System (INIS)

    Knotek, M.L.

    1993-01-01

    This paper looks at the waste processing program for Hanford from the perspective of science and technology. The Hanford waste processing problem is but one phase of the total defense waste problem in the country, and a small part of the total waste disposal problem of the industrial base of the country. Basic research effort on this problem will address the specific problems encountered in the forms of this waste, but will also develop technology of use to the entire industrial base of the country, while at the same time trying to benefit from technology being developed in this industrial base. The Hanford waste represents a huge financial cost in terms of its present volume, if handled by the proposed methods of grouting and vitrification. To decrease this costs technology will have to come forward with new processes which result in the overall decrease in waste volume, if not the chemical tailoring of this volume to be more amenable to these disposal methods. There must be a tradeoff in overall costs, technology development costs, treatment and disposal costs. But in general, if separations can be carried to a more developed level, the volume reductions will give cost gains which will support the effort. As technology is developed, the flow charts set up for dealing with the different waste streams will be narrowed by decisions made at different points. Adequate scientific support for these decisions will result in the minimum costs in developing eventual waste processing streams

  3. ASEAN--USAID Buildings Energy Conservation Project final report. Volume 2, Technology

    Energy Technology Data Exchange (ETDEWEB)

    Levine, M.D.; Busch, J.F. [eds.

    1992-06-01

    This volume reports on research in the area of energy conservation technology applied to commercial buildings in the Association of Southeast Asian Nations (ASEAN) region. Unlike Volume I of this series, this volume is a compilation of original technical papers prepared by different authors in the project. In this regard, this volume is much like a technical journal. The papers that follow report on research conducted by both US and ASEAN researchers. The authors representing Indonesia, Malaysia, Philippines, and Thailand, come from a range of positions in the energy arena, including government energy agencies, electric utilities, and universities. As such, they account for a wide range of perspectives on energy problems and the role that technology can play in solving them. This volume is about using energy more intelligently. In some cases, the effort is towards the use of more advanced technologies, such as low-emittance coatings on window glass, thermal energy storage, or cogeneration. In others, the emphasis is towards reclaiming traditional techniques for rendering energy services, but in new contexts such as lighting office buildings with natural light, or cooling buildings of all types with natural ventilation. Used in its broadest sense, the term ``technology`` encompasses all of the topics addressed in this volume. Along with the more customary associations of technology, such as advanced materials and equipment and the analysis of their performance, this volume treats design concepts and techniques, analysis of ``secondary`` impacts from applying technologies (i.e., unintended impacts, or impacts on parties not directly involved in the purchase and use of the technology), and the collection of primary data used for conducting technical analyses.

  4. Energy perspectives 2035 - Volume 4, side-notes

    International Nuclear Information System (INIS)

    2007-01-01

    This comprehensive report published by the Swiss Federal Office of Energy (SFOE) presents a number of side-notes pertaining to the first three volumes of the Energy Perspectives series of reports. Various topics are discussed by the authors of the first three volumes of the perspectives in the meetings held by the Energy Perspectives Working Group. The sixteen side-notes presented here cover the following topics: General conditions, fossil resources, the influence of climate warming, CO 2 emissions trading (Joint Implementation JI and Clean Development Mechanism CDM), definition of potentials, air traffic, imported renewable electricity, hydro power, electricity cost calculation, sensitivity analysis of centralised power production facilities, heat-pumps and their power consumption, cold spells and heat-waves, risk and its perception, the 2000-Watt society and international and national energy perspectives

  5. 9th Pacific Basin Nuclear Conference. Nuclear energy, science and technology - Pacific partnership. Proceedings Volume 1

    International Nuclear Information System (INIS)

    1994-04-01

    The theme of the 9th Pacific Basin Nuclear conference held in Sydney from 1-6 May 1994, embraced the use of the atom in energy production and in science and technology. The focus was on selected topics of current and ongoing interest to countries around the Pacific Basin. The two-volume proceedings include both invited and contributed papers. They have been indexed separately. This document, Volume 1 covers the following topics: Pacific partnership; perspectives on nuclear energy, science and technology in Pacific Basin countries; nuclear energy and sustainable development; economics of the power reactors; new power reactor projects; power reactor technology; advanced reactors; radioisotope and radiation technology; biomedical applications

  6. Environmental control implications of generating electric power from coal. Technology status report. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-12-01

    This is the first in a series of reports evaluating environmental control technologies applicable to the coal-to-electricity process. The technologies are described and evaluated from an engineering and cost perspective based upon the best available information obtained from utility experience and development work in progress. Environmental control regulations and the health effects of pollutants are also reviewed. Emphasis is placed primarily upon technologies that are now in use. For SO/sub 2/ control, these include the use of low sulfur coal, cleaned coal, or flue-gas desulfurization systems. Electrostatic precipitators and fabric filters used for the control of particulate matter are analyzed, and combustion modifications for NO/sub x/ control are described. In each area, advanced technologies still in the development stage are described briefly and evaluated on the basis of current knowledge. Fluidized-bed combustion (FBC) is a near-term technology that is discussed extensively in the report. The potential for control of SO/sub 2/ and NO/sub x/ emissions by use of FBC is analyzed, as are the resulting solid waste disposal problems, cost estimates, and its potential applicability to electric utility systems. Volume II presents the detailed technology analyses complete with reference citations. This same material is given in condensed form in Volume I without references. A brief executive summary is also given in Volume I.

  7. Oak Ridge K-25 Site Technology Logic Diagram. Volume 2, Technology Logic Diagrams

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates envirorunental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. This volume, Volume 2, contains logic diagrams with an index. Volume 3 has been divided into two separate volumes to facilitate handling and use.

  8. Oak Ridge K-25 Site Technology Logic Diagram. Volume 1, Technology evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. This Volume, Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This volume is divided into ten chapters. The first chapter is a brief introduction, and the second chapter details the technical approach of the TLD. These categories are the work activities necessary for successful decontamination and decommissioning, waste management, and remedial action of the K-25 Site. The categories are characterization, decontamination, dismantlement, robotics and automation, remedial action, and waste management. Materials disposition is addressed in Chap. 9. The final chapter contains regulatory compliance information concerning waste management, remedial action, and decontamination and decommissioning.

  9. Managing Technological Dynamics. A Transdisciplinary Perspective

    DEFF Research Database (Denmark)

    Drejer, Anders; Ulhøi, John Parm

    1998-01-01

    The authors of this paper represent different traditions and approaches to Management of Technology (MoT) and to Technology Studies (TS) at firm level. This offers an opportunity to develop a transdisciplinary perspective. MoT and TS, it is argued, can be addressed from rationalistic planning...

  10. Science, technology and society : a methodological perspective

    NARCIS (Netherlands)

    Vries, de M.J.; Vries, de M.J.; Tamir, A.

    1997-01-01

    Methodology offers a perspective on technology that differs from a historical or sociological one. It focuses on the scientific, technological and social factors that are to be taken into account in technological developments. Other approaches tend to focus on actors rather than factors. The

  11. Immobilization of defense high-level waste: an assessment of technological strategies and potential regulatory goals. Volume I

    International Nuclear Information System (INIS)

    1979-06-01

    An investigation was made of the high-level radioactive waste immobilization technology programs in the U.S. and Europe, and of the associated regulatory programs and waste management perspectives in the countries studied. Purpose was to assess the ability of those programs to satisfy DOE waste management needs and U.S. regulatory requirements. This volume includes: introduction, immobilization strategies in the context of waste isolation program needs, high-level waste management as an integrated system, regulatory goals, engineered-barrier characteristics, barrier technology, high-level waste disposal programs, analysis of HLW immobilization technology in the context of policy and regulatory requirements, and waste immobilization program option

  12. International pressure vessels and piping codes and standards. Volume 2: Current perspectives; PVP-Volume 313-2

    International Nuclear Information System (INIS)

    Rao, K.R.; Asada, Yasuhide; Adams, T.M.

    1995-01-01

    The topics in this volume include: (1) Recent or imminent changes to Section 3 design sections; (2) Select perspectives of ASME Codes -- Section 3; (3) Select perspectives of Boiler and Pressure Vessel Codes -- an international outlook; (4) Select perspectives of Boiler and Pressure Vessel Codes -- ASME Code Sections 3, 8 and 11; (5) Codes and Standards Perspectives for Analysis; (6) Selected design perspectives on flow-accelerated corrosion and pressure vessel design and qualification; (7) Select Codes and Standards perspectives for design and operability; (8) Codes and Standards perspectives for operability; (9) What's new in the ASME Boiler and Pressure Vessel Code?; (10) A look at ongoing activities of ASME Sections 2 and 3; (11) A look at current activities of ASME Section 11; (12) A look at current activities of ASME Codes and Standards; (13) Simplified design methodology and design allowable stresses -- 1 and 2; (14) Introduction to Power Boilers, Section 1 of the ASME Code -- Part 1 and 2. Separate abstracts were prepared for most of the individual papers

  13. Perspectives on High School Reform. NCREL Viewpoints, Volume 13

    Science.gov (United States)

    Learning Point Associates / North Central Regional Educational Laboratory (NCREL), 2005

    2005-01-01

    Viewpoints is a multimedia package containing two audio CDs and a brief, informative booklet. This volume of Viewpoints focuses on issues related to high school reform. This booklet offers background information explaining the issues surrounding high school reform with perspectives from research, policy, and practice. It also provides a list of…

  14. Smart Grid Technologies: Trends and Perspectives

    Directory of Open Access Journals (Sweden)

    Buran Anna

    2017-01-01

    Full Text Available The study explores the role of Smart Grid technologies, giving sustainable, reliable and safe energy. These technologies will provide an economic benefit to the government, the investors and the consumers. The paper overviews global trends and perspectives of using Smart Grid technologies in Russia and in other countries. The Smart Grid concept is especially important for Russia, because there are many power supply problems in the energy sector. This study is expected to be important for researchers and engineers studying Smart Grid technologies.

  15. A global sustainability perspective on 3D printing technologies

    International Nuclear Information System (INIS)

    Gebler, Malte; Schoot Uiterkamp, Anton J.M.; Visser, Cindy

    2014-01-01

    Three-dimensional printing (3DP) represents a relative novel technology in manufacturing which is associated with potentially strong stimuli for sustainable development. Until now, research has merely assessed case study-related potentials of 3DP and described specific aspects of 3DP. This study represents the first comprehensive assessment of 3DP from a global sustainability perspective. It contains a qualitative assessment of 3DP-induced sustainability implications and quantifies changes in life cycle costs, energy and CO 2 emissions globally by 2025. 3DP is identified to cost-effectively lower manufacturing inputs and outputs in markets with low volume, customized and high-value production chains as aerospace and medical component manufacturing. This lowers energy use, resource demands and related CO 2 emissions over the entire product life cycle, induces changes in labour structures and generates shifts towards more digital and localized supply chains. The model calculations show that 3DP contains the potential to reduce costs by 170–593 billion US $, the total primary energy supply by 2.54–9.30 EJ and CO 2 emissions by 130.5–525.5 Mt by 2025. The great range within the saving potentials can be explained with the immature state of the technology and the associated uncertainties of predicting market and technology developments. The energy and CO 2 emission intensities of industrial manufacturing are reducible by maximally 5% through 3DP by 2025, as 3DP remains a niche technology. If 3DP was applicable to larger production volumes in consumer products or automotive manufacturing, it contains the (theoretical) potential to absolutely decouple energy and CO 2 emission from economic activity. - Highlights: • Global sustainability aspects of 3DP in manufacturing are assessed in two ways. • 3DP will strongly influence manufacturing in aerospace, medical components, tooling. • 3DP re-shifts production to consumer countries due to decreased labour costs.

  16. Discovering magic of mobile technology in business: strategic marketing perspective

    OpenAIRE

    Bolat, Elvira

    2016-01-01

    Mobile technology penetrated all aspects of social and business existence. Studies around mobile technology mostly address the use and adoption process of mobile marketing or mobile commerce from a consumer perspective rather than from a business perspective. Another concern of majority of studies on the use of mobile technology is a focus on technical nature of mobile devices despite the fact that true magic of technology resides in its mobilisation and usage – the deployment of mobile techn...

  17. Science and technology from global and historical perspectives

    CERN Document Server

    Karagözoğlu, Bahattin

    2017-01-01

    This book provides science and technology ethos to a literate person. It starts with a rather detailed treatment of basic concepts in human values, educational status and domains of education, development of science and technology and their contributions to the welfare of society. It describes ways and means of scientific progresses and technological advancements with their historical perspectives including scientific viewpoints of contributing scientists and technologists. The technical, social, and cultural dimensions are surveyed in relation to acquisition and application of science, and advantages and hindrances of technological developments. Science and Technology is currently taught as a college course in many universities with the intention to introduce topics from a global historical perspective so that the reader shall stretch his/her vision by mapping the past to the future. The book can also serve as a primary reference for such courses.

  18. Automotive Painting Technology A Monozukuri-Hitozukuri Perspective

    CERN Document Server

    Salazar, Abraham; Saito, Kozo

    2013-01-01

    This book offers unique and valuable contributions to the field. It offers breadth and inclusiveness. Most existing works on automotive painting cover only a single aspect of this complex topic, such as the chemistry of paint or paint booth technology. Monozukuri and Hitozukuri are Japanese terms that can be translated as “making things” and “developing people” but their implications in Japanese are richer and more complex than this minimal translation would indicate. The Monozukuri-Hitozukuri perspective is drawn from essential principles on which the Toyota approach to problem-solving and continuous improvement is based. From this perspective, neither painting technology R&D nor painting technology use in manufacturing can be done successfully without integrating technological and human concerns involved with making and learning in the broadest sense, as the hyphen is meant to indicate. The editors provide case studies and examples -- drawn from Mr. Toda’s 33 years of experience with automotiv...

  19. Energy Technology Perspectives 2012: Executive Summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-09-05

    Energy Technology Perspectives (ETP) is the International Energy Agency's most ambitious publication on new developments in energy technology. It demonstrates how technologies -- from electric vehicles to smart grids -- can make a decisive difference in achieving the objective of limiting the global temperature rise to 2 C and enhancing energy security. ETP 2012 presents scenarios and strategies to 2050, with the aim of guiding decision makers on energy trends and what needs to be done to build a clean, secure and competitive energy future.

  20. Understanding online purchase intentions: contributions from technology and trust perspectives

    NARCIS (Netherlands)

    van der Heijden, J.G.M.; Verhagen, T.

    2003-01-01

    This paper explores factors that influence consumer's intentions to purchase online at an electronic commerce website. Specifically, we investigate online purchase intention using two different perspectives: a technology-oriented perspective and a trust-oriented perspective. We summarise and review

  1. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part A, Remedial action

    International Nuclear Information System (INIS)

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part A of Volume 3 and contains the Remedial Action section

  2. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part A, Remedial action

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part A of Volume 3 and contains the Remedial Action section.

  3. Palliative home-based technology from a practitioner's perspective: benefits and disadvantages

    Directory of Open Access Journals (Sweden)

    Johnston BM

    2014-11-01

    Full Text Available Bridget M Johnston Sue Ryder Care Centre for the Study of Supportive, Palliative, and End of Life Care, School of Health Sciences, University of Nottingham, Queen's Medical Centre, Nottingham, UK Abstract: This critical review paper explores the concept of palliative home-based technology from a practitioner's perspective. The aim of the critical review was to scope information available from published and unpublished research on the current state of palliative home-based technology, practitioner-focused perspectives, patient-focused perspectives, quality of life, and the implications for clinical practice. Published and unpublished studies were included. An example of one UK patient-centered home-based technology is explored as an exemplar. The evidence suggests that despite the challenges, there are numerous examples of good practice in relation to palliative home-based technology. Improvements in technology mean that telehealth has much to offer people being cared for at home with palliative needs. However, some of the evaluative evidence is limited, and further rigor is needed when evaluating future technology-based solutions innovations. Keywords: technology, telehealth, telemedicine, information technology, palliative care, hospice, terminal illness

  4. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part B, Characterization; robotics/automation

    International Nuclear Information System (INIS)

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate theses problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part B of Volume 3 and contains the Characterization and Robotics/Automation sections

  5. Advances and perspectives in radiobiological technology

    International Nuclear Information System (INIS)

    Kuzin, A.M.; Kaushanskij, D.A.

    1983-01-01

    On the basis of the analysis of experience in the USSR and in foreign countries nowadays the state and perspectives for the development of a new, in principle, aspect of technology is considered based on using ionizing radiations and radiobiological effects in agriculture, medical-, food-, microbiological and other branches of industry

  6. ''Perspectives in nuclear technology'': recruiting young scientists and engineers

    International Nuclear Information System (INIS)

    Wasgindt, V.

    2003-01-01

    Securing competence in nuclear technology is a topic of great interest especially because the preservation and promotion of scientific and technical know-how in Germany are particularly important under conditions of an opt-out of the use of nuclear power. In the light of decreasing numbers of graduates from courses in nuclear science and technology, positive action is indicated. For the first time, the Deutsches Atomforum e.V., together with major partners in cooperation, therefore organized a colloquy last year on 'Perspectives in Nuclear Technology'. Young students of various disciplines were given an opportunity to obtain in-depth information about nuclear power as part of the entire field of energy supply by attending lectures, round-table discussions, and on-site events. Because of the positive response elicited by that first event, another 'Perspectives in Nuclear Technology' colloquy will be held in 2003. (orig.)

  7. Oak Ridge K-25 Site Technology Logic Diagram. Volume 3, Technology evaluation data sheets; Part A, Characterization, decontamination, dismantlement

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This report is part A of Volume 3 concerning characterization, decontamination, and dismantlement.

  8. Does Mobile Technology Matter? A Student Centric Perspective

    OpenAIRE

    Chen, Wenshin

    2010-01-01

    Based on a student-centric perspective, this study seeks to understand how mobile technology influences students’ learning experiences. Our research motivation is driven by the increasing attention paid to mobile technology in the research and business community. Set in a public university setting, our investigation seeks to shed light on how teaching and learning could be reshaped by mobile technology, most specifically, emerging tablet PCs. The findings, based on two MIS (Management Informa...

  9. Trust in technology a socio-technical perspective

    CERN Document Server

    Clarke, Karen; Rouncefield, Mark

    2006-01-01

    Encapsulates work done in the DIRC project (Interdisciplinary Research Collaboration in Dependability), bringing together a range of disciplinary approaches - computer science, sociology and software engineering - to produce a socio-technical systems perspective on the issues surrounding trust in technology in complex settings.

  10. Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part B, Dismantlement, Remedial action

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

  11. Fusion Technology 1996. Proceedings. Volume 1 and 2

    International Nuclear Information System (INIS)

    Varandas, C.; Serra, F.

    1997-01-01

    The objective of these proceedings was to provide a platform for the exchange of information on the design, construction and operation of fusion experiments. The technology which is being developed for the next step devices and fusion reactors was also covered. Sections in volume 1 concern (A) first wall, divertors and vacuum systems; (B) plasma heating and control; (C) plasma engineering and control; and (D) experimental systems. The sections in volume 2 deal with (E) magnet and related power supplies; (F) fuel cycle and tritium processing systems; (G) blanket technology/materials; (H) assembly, remote handling and waste management and storage; and (I) safety and environment, and reactor studies

  12. Technology Change And Working Conditions – A Cultural Perspective

    DEFF Research Database (Denmark)

    Sørensen, Ole Henning

    2004-01-01

    When technology change improves working conditions, the success is often attributed to skilful change agents. When it is not, the blame is on “resistance to change” and “resilient cultures”. How can these failures be understood differently? A cultural perspective on technology change might be a way...... to facilitate technology change processes that lead to improved working conditions. The research based project described here has developed a special homepage that explains how this might be achieved. The homepage is targeted at working life professionals. The homepage presents theoretical explanations...... of the concept of organizational culture, a model for analysis and several practical case stories. This paper explains how the project tries to reach a broad spectrum of professionals in order to facilitate their use of a cultural perspective. It also discusses the ethical consequences of the cultural...

  13. Energy Technology Perspectives 2012: Executive Summary [Italian version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-01

    Energy Technology Perspectives (ETP) is the International Energy Agency’s most ambitious publication on new developments in energy technology. It demonstrates how technologies – from electric vehicles to smart grids – can make a decisive difference in achieving the objective of limiting the global temperature rise to 2°C and enhancing energy security. ETP 2012 presents scenarios and strategies to 2050, with the aim of guiding decision makers on energy trends and what needs to be done to build a clean, secure and competitive energy future.

  14. Energy Technology Perspectives 2012: Executive Summary [French version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-01

    Energy Technology Perspectives (ETP) is the International Energy Agency’s most ambitious publication on new developments in energy technology. It demonstrates how technologies – from electric vehicles to smart grids – can make a decisive difference in achieving the objective of limiting the global temperature rise to 2°C and enhancing energy security. ETP 2012 presents scenarios and strategies to 2050, with the aim of guiding decision makers on energy trends and what needs to be done to build a clean, secure and competitive energy future.

  15. Energy Technology Perspectives 2012: Executive Summary [Spanish version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-01

    Energy Technology Perspectives (ETP) is the International Energy Agency’s most ambitious publication on new developments in energy technology. It demonstrates how technologies – from electric vehicles to smart grids – can make a decisive difference in achieving the objective of limiting the global temperature rise to 2°C and enhancing energy security. ETP 2012 presents scenarios and strategies to 2050, with the aim of guiding decision makers on energy trends and what needs to be done to build a clean, secure and competitive energy future.

  16. Energy Technology Perspectives 2012: Executive Summary [Arabic version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-01

    Energy Technology Perspectives (ETP) is the International Energy Agency’s most ambitious publication on new developments in energy technology. It demonstrates how technologies – from electric vehicles to smart grids – can make a decisive difference in achieving the objective of limiting the global temperature rise to 2°C and enhancing energy security. ETP 2012 presents scenarios and strategies to 2050, with the aim of guiding decision makers on energy trends and what needs to be done to build a clean, secure and competitive energy future.

  17. Energy Technology Perspectives 2012: Executive Summary [Portuguese version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-01

    Energy Technology Perspectives (ETP) is the International Energy Agency’s most ambitious publication on new developments in energy technology. It demonstrates how technologies – from electric vehicles to smart grids – can make a decisive difference in achieving the objective of limiting the global temperature rise to 2°C and enhancing energy security. ETP 2012 presents scenarios and strategies to 2050, with the aim of guiding decision makers on energy trends and what needs to be done to build a clean, secure and competitive energy future.

  18. Technological development in the fruit and vegetable industry: A property rights perspective

    DEFF Research Database (Denmark)

    Plichta, Kirsten

    within the production-cost-minimization path can be easily understood from an artefact perspective of technology, while the transaction-cost-minimization path requires a supplementary perspective which can be found within theories on transaction costs. 3) The set of technological opportunities underlying...... the production-cost-minimization path consists of opportunities for improving the efficiency of firms' processing technology and opportunities for optimizing the cultivation and harvesting of the crops used in processing. 4) Firms' incentives for technological development of the opportunities underlying...... of the production processes, development of measures and measurement technology, and sorting techniques for reducing quality variations in the final products, including reducing quality variations by improving crop and harvesting methods. 6) Firms' and farmers' incentives for technological development...

  19. WHAT ARE USER PERSPECTIVES OF EXOSKELETON TECHNOLOGY? A LITERATURE REVIEW.

    Science.gov (United States)

    Hill, Deborah; Holloway, Catherine Sarah; Morgado Ramirez, Dafne Zuleima; Smitham, Peter; Pappas, Yannis

    2017-01-01

    Exoskeletons are electromechanical devices that are worn by a human operator to increase their physical performance. Several exoskeletons have been developed to restore functional movements, such as walking, for those with paralysis due to neurological impairment. However, existing exoskeletons have limitations with respect to affordability, size, weight, speed, and efficiency, which may reduce their functional application. Therefore, the aim of this scoping review is to collect and narratively synthesize the perspectives of users of exoskeleton technology. A systematic literature search was conducted across several healthcare related online databases. A total of 4,619 articles were identified, of which 51 were selected for full review. Only three studies were identified that met the inclusion criteria. Of these, one showed an incongruence between users' expectations and experiences of device use; another reported perspectives on potential rather than actual device use, ranking design features in order of perceived importance; and the other reported ratings of ease of device use in training. The heterogeneity of studies included within this review, leave the authors unable to suggest consensus as to user perspectives of exoskeleton technology. However, it is apparent that users are able to suggest priorities for exoskeleton design and that users' perspectives of exoskeleton technology might change in response to experience of use. The authors, therefore, suggest that exoskeleton design should be an iterative process, whereby user perspectives are sought, incorporated and refined by tangible experience, to ensure that devices developed are acceptable to and usable by the populations they seek to re-enable.

  20. Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part C, Robotics/automation, Waste management

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

  1. Oak Ridge National Laboratory Technology Logic Diagram. Volume 1, Technology Evaluation: Part B, Remedial Action

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Part A of Vols. 1 and 2 focuses on D&D. Part B of Vols. 1 and 2 focuses on RA of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the ranking os remedial technologies. Volume 2 (Pts. A, B, and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A, B, and C) contains the TLD data sheets. The focus of Vol. 1, Pt. B, is RA, and it has been divided into six chapters. The first chapter is an introduction, which defines problems specific to the ER Program for ORNL. Chapter 2 provides a general overview of the TLD. Chapters 3 through 5 are organized into necessary subelement categories: RA, characterization, and robotics and automation. The final chapter contains regulatory compliance information concerning RA.

  2. The Impact of Comparative Education Research on Institutional Theory. International Perspectives on Education and Society. Volume 7

    Science.gov (United States)

    Baker, David, Ed.; Wiseman, Alex, Ed.

    2006-01-01

    This volume of International Perspectives on Education and Society explores how educational research from a comparative perspective has been instrumental in broadening and testing hypotheses from institutional theory. Institutional theory has also played an increasingly influential role in developing an understanding of education in society. This…

  3. Teen Culture, Technology and Literacy Instruction: Urban Adolescent Students’ Perspectives

    Directory of Open Access Journals (Sweden)

    Jia Li

    2015-10-01

    Full Text Available Modern teens have pervasively integrated new technologies into their lives, and technology has become an important component of teen popular culture. Educators have pointed out the promise of exploiting technology to enhance students’ language and literacy skills and general academic success. However, there is no consensus on the effect of technology on teens, and scant literature is available that incorporates the perspective of urban and linguistically diverse students on the feasibility of applying new technologies in teaching and learning literacy in intact classrooms. This paper reports urban adolescents’ perspectives on the use of technology within teen culture, for learning in general and for literacy instruction in particular. Focus group interviews were conducted among linguistically diverse urban students in grades 6, 7 and 8 in a lower income neighborhood in the Northeastern region of the United States. The major findings of the study were that 1 urban teens primarily and almost exclusively used social media and technology devices for peer socializing, 2 they were interested in using technology to improve their literacy skills, but did not appear to voluntarily or independently integrate technology into learning, and 3 8th graders were considerably more sophisticated in their use of technology and their suggestions for application of technology to literacy learning than 6th and 7th graders. These findings lead to suggestions for developing effective literacy instruction using new technologies.

  4. Oak Ridge National Laboratory Technology Logic Diagram. Volume 2, Technology Logic Diagram: Part B, Remedial Action

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Part A of Vols. 1. and 2 focuses on D&D. Part B of Vols. 1 and 2 focuses on the RA of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 (Pts. A, B, and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A, B, and C) contains the TLD data sheets. Remedial action is the focus of Vol. 2, Pt. B, which has been divided into the three necessary subelements of the RA: characterization, RA, and robotics and automation. Each of these sections address general ORNL problems, which are then broken down by problem area/constituents and linked to potential remedial technologies. The diagrams also contain summary information about a technology`s status, its science and technology needs, and its implementation needs.

  5. Different Perspectives on Technology Acceptance: The Role of Technology Type and Age

    Science.gov (United States)

    Arning, Katrin; Ziefle, Martina

    Although eHealth technologies offer an enormous potential to improve healthcare, the knowledge about key determinants of acceptance for eHealth technology is restricted. While the underlying technology of eHealth technologies and Information and Communication technology (ICT) is quite similar, utilization contexts and using motives are quite different. In order to explore the role of technology type on acceptance, we contrasted central application characteristics of both technology types using the scenario technique. A questionnaire was administered (n = 104) measuring individual variables (age, gender) and attitudes regarding an eHealth application (blood sugar meter) in contrast to an ICT device (Personal Digital Assistant, PDA). Older users basically approved the utilization of health-related technologies and perceived lower usability barriers. In addition, we identified main utilization motives of eHealth technology and technology-specific acceptance patterns, especially regarding issues of data safety in the eHealth context. Effects of age and gender in acceptance ratings suggest a differential perspective on eHealth acceptance. Finally, practical interventions were derived in order to support eHealth device design and to promote acceptance of eHealth technology.

  6. Oak Ridge K-25 Site Technology Logic Diagram. Volume 3, Technology evaluation data sheets; Part B, Remedial action, robotics/automation, waste management

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration (ER) and waste management (WN) problems at the Oak Ridge K-25 Site. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remediation, decontamination, and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This volume 3 B provides the Technology Evaluation Data Sheets (TEDS) for ER/WM activities (Remedial Action Robotics and Automation, Waste Management) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than each technology in Vol. 2. The TEDS are arranged alphanumerically by the TEDS code number in the upper right corner of each data sheet. Volume 3 can be used in two ways: (1) technologies that are identified from Vol. 2 can be referenced directly in Vol. 3 by using the TEDS codes, and (2) technologies and general technology areas (alternatives) can be located in the index in the front of this volume.

  7. Coal slurry combustion and technology. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    Volume II contains papers presented at the following sessions of the Coal Slurry Combustion and Technology Symposium: (1) bench-scale testing; (2) pilot testing; (3) combustion; and (4) rheology and characterization. Thirty-three papers have been processed for inclusion in the Energy Data Base. (ATT)

  8. Liquid Metal Engineering and Technology. Volume 1

    International Nuclear Information System (INIS)

    1988-01-01

    These proceedings of the fourth international conference on liquid metal engineering and technology volume 1, are devided into 3 sections bearing on: - Apparatus and components for liquid metal (29 papers) - Liquid metal leaks, fires and fumes (10 papers) - Cleaning, decontamination, waste disposal (14 papers) [fr

  9. Current status and future potential for advanced volume reduction technologies

    International Nuclear Information System (INIS)

    Rutland, L.; Naughton, M.D.; Papaiya, N.C.

    1984-01-01

    With escalating costs for disposal of low-level radioactive waste (LLW) from nuclear power plants, and the possibility of unavailability of disposal space, some nuclear power utilities responded by commiting to implementing advanced volume reduction (VR) systems. This paper presents recent experience to implement advanced volume reduction technologies; their performance and typical operating and capital costs. This experience in the light of current economic conditions may enable us to predict the direction that future advanced VR technology commitments is taking

  10. Industrial Sector Technology Use Model (ISTUM): industrial energy use in the United States, 1974-2000. Volume 4. Technology appendix. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    1979-10-01

    Volume IV of the ISTUM documentation gives information on the individual technology specifications, but relates closely with Chapter II of Volume I. The emphasis in that chapter is on providing an overview of where each technology fits into the general-model logic. Volume IV presents the actual cost structure and specification of every technology modeled in ISTUM. The first chapter presents a general overview of the ISTUM technology data base. It includes an explanation of the data base printouts and how the separate-cost building blocks are combined to derive an aggregate-technology cost. The remaining chapters are devoted to documenting the specific-technology cost specifications. Technologies included are: conventional technologies (boiler and non-boiler conventional technologies); fossil-energy technologies (atmospheric fluidized bed combustion, low Btu coal and medium Btu coal gasification); cogeneration (steam, machine drive, and electrolytic service sectors); and solar and geothermal technologies (solar steam, solar space heat, and geothermal steam technologies), and conservation technologies.

  11. A Historical Perspective on Student Affairs Professionals' Use of Digital Technology

    Science.gov (United States)

    Cabellon, Edmund T.; Payne-Kirchmeier, Julie

    2016-01-01

    This chapter provides a historical perspective of student affairs professionals' use of digital and social technologies in their work on college campuses. The purpose of the chapter is to describe how digital technology tools have evolved since 2005, demonstrate how student affairs technology shifted and changed during this time, and shape student…

  12. Y-12 Plant decontamination and decommissioning technology logic diagram for Building 9201-4. Volume 2: Technology logic diagram

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4 (TLD) was developed to provide a decision-support tool that relates decontamination and decommissioning (D and D) problems at Bldg. 9201-4 to potential technologies that can remediate these problems. This TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to D and D and waste management (WM) activities. It is essential that follow-on engineering studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in the TLD and by finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 2 has been divided into five sections: Characterization, Decontamination, Dismantlement, Robotics/Automation, and Waste Management. Each section contains logical breakdowns of the Y-12 D and D problems by subject area and identifies technologies that can be reasonably applied to each D and D challenge.

  13. Y-12 Plant decontamination and decommissioning technology logic diagram for Building 9201-4. Volume 2: Technology logic diagram

    International Nuclear Information System (INIS)

    1994-09-01

    The Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4 (TLD) was developed to provide a decision-support tool that relates decontamination and decommissioning (D and D) problems at Bldg. 9201-4 to potential technologies that can remediate these problems. This TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to D and D and waste management (WM) activities. It is essential that follow-on engineering studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in the TLD and by finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 2 has been divided into five sections: Characterization, Decontamination, Dismantlement, Robotics/Automation, and Waste Management. Each section contains logical breakdowns of the Y-12 D and D problems by subject area and identifies technologies that can be reasonably applied to each D and D challenge

  14. Using a management perspective to define and measure changes in nursing technology.

    Science.gov (United States)

    Alexander, J W; Kroposki, M

    2001-09-01

    The aims of this paper are to discuss the uses of the concept of technology from the medical science and the management perspectives; to propose a clear definition of nursing technology; and to present a study applying the use of the concept of nursing technology on nursing units. Nurse managers must use management terms correctly and the term technology may be misleading for some. A review of the nursing literature shows varied uses of the concept of technology. Thus a discussion of the dimensions, attributes, consequences, and definitions of nursing technology from the management perspective are given. A longitudinal study to measure the dimensions of nursing technology on nursing units 10 years apart. The findings suggest that the dimensions of nursing technology change over time and support the need for nurse managers to periodically assess nursing technology before making management changes at the level of the nursing unit. This study helps health care providers understand the unique role of nurses as healthcare professionals by identifying and measuring nursing technology on the nursing unit.

  15. Technology for Space Station Evolution. Volume 3: EVA/Manned Systems/Fluid Management System

    Science.gov (United States)

    1990-01-01

    NASA's Office of Aeronautics and Space Technology (OAST) conducted a workshop on technology for space station evolution 16-19 Jan. 1990 in Dallas, Texas. The purpose of this workshop was to collect and clarify Space Station Freedom technology requirements for evolution and to describe technologies that can potentially fill those requirements. These proceedings are organized into an Executive Summary and Overview and five volumes containing the Technology Discipline Presentations. Volume 3 consists of the technology discipline sections for Extravehicular Activity/Manned Systems and the Fluid Management System. For each technology discipline, there is a Level 3 subsystem description, along with the papers.

  16. The Student Perspective: Can the Use of Technologies Transform Learning?

    OpenAIRE

    O'Donnell, Eileen

    2010-01-01

    PUBLISHED This chapter explores students? perspectives on the transformations that the use of technology has brought to higher education. The use of technologies in higher education facilitates flexible learning environments but the benefits to students who engage with these technologies will only be realised if the design is pedagogically sound. The pedagogic approach employed by lecturers when designing their e-learning platforms or learning management systems has the cap...

  17. Technology 2003: The Fourth National Technology Transfer Conference and Exposition, volume 2

    Science.gov (United States)

    Hackett, Michael (Compiler)

    1994-01-01

    Proceedings from symposia of the Technology 2003 Conference and Exposition, Dec. 7-9, 1993, Anaheim, CA, are presented. Volume 2 features papers on artificial intelligence, CAD&E, computer hardware, computer software, information management, photonics, robotics, test and measurement, video and imaging, and virtual reality/simulation.

  18. What’s Political about Solar Electric Technology? The User’s Perspective

    Directory of Open Access Journals (Sweden)

    Chelsea Schelly

    2015-11-01

    Full Text Available Scholars in science and technology studies have debated the various ways in which technologies are (or are not political. Here, I examine how users themselves understand and articulate the politics of a specific technology—residential solar electric technology—and how understandings of politics interact with motivations to adopt. Based on interviews with 48 individuals in 36 households across the state of Wisconsin who have adopted residential solar electric technology, I consider the user’s perspective on the question: “What’s political about residential solar electric technology use?” These users were asked about the politics of this technology and how their understanding of the technology’s politics shaped their own motivation for adoption. These solar electric technology adopters saw solar electric technology as both imbued with political character based on the current national political scene and as inherently, innately political. They described how solar electric technology interacts with the politics of environmentalism, challenges “politics-as-usual” and can bring about decentralization and redistribution of wealth. In short, to the users of solar electric technology, this technological artifact is, indeed, political; it both interacts with, and offers an alternative to, current American political structures. Further, their perspectives on the politics of solar technology shaped their understandings of motivations for and limitations to adoption of this alternative technology.

  19. Isotope production technologies from a regulatory perspective

    Energy Technology Data Exchange (ETDEWEB)

    Murthy, K. [Canadian Nuclear Safety Committee, Ottawa, Ontario (Canada)

    2012-07-01

    This paper discusses isotope production technologies from a regulatory perspective. The regulator is the CNSC which has the mandate to protect the health, safety and security of persons and the environment and to implement Canada's international commitments on the peaceful use of nuclear energy. Nuclear facilities regulated by CNSC include linear accelerator (medical), pool irradiator (industrial) and Pelletron (research) as well as cyclotrons.

  20. Perspective of Australian uncooled IR sensor technology

    Science.gov (United States)

    Liddiard, Kevin C.

    2000-12-01

    This paper presents an overview of the development in Australia of resistance bolometer technology and associated uncooled infrared sensors. A summary is given of research achievements, with the aim of placing in historic perspective Australian work in comparison with overseas research and development. Extensive research in this field was carried out at the Defence Science and Technology Organisation (DSTO), Salisbury, South Australia, in collaboration with the Australian microelectronic and electro-optic industries, with supporting research in Australian universities. The DSTO research has a history covering five decades, commencing with simple thin film bolometers employed in radiometric sensors, followed by protracted R&D culminating in development of micromachined focal plane detector arrays for non-imaging sensors and lightweight thermal imagers. DSTO currently maintains a microbolometer processing capability for the purposes of research collaboration and support for commercial initiatives based on patented technology. Expertise in microbolometer design, performance and processing technology has transferred to Electro-optic Sensor Design (EOSD) through a licensing agreement. Contemporary development will be described.

  1. Understanding energy technology developments from an innovation system perspective

    Energy Technology Data Exchange (ETDEWEB)

    Borup, M.; Nygaard Madsen, A. [Risoe National Lab., DTU, Systems Analysis Dept., Roskilde (Denmark); Gregersen, Birgitte [Aalborg Univ., Department of Business Studies (Denmark)

    2007-05-15

    With the increased market-orientation and privatisation of the energy area, the perspective of innovation is becoming more and more relevant for understanding the dynamics of change and technology development in the area. A better understanding of the systemic and complex processes of innovation is needed. This paper presents an innovation systems analysis of new and emerging energy technologies in Denmark. The study focuses on five technology areas: bio fuels, hydrogen technology, wind energy, solar cells and energy-efficient end-use technologies. The main result of the analysis is that the technology areas are quite diverse in a number of innovation-relevant issues like actor set-up, institutional structure, maturity, and connections between market and non-market aspects. The paper constitutes background for discussing the framework conditions for transition to sustainable energy technologies and strengths and weaknesses of the innovation systems. (au)

  2. Using Technology to Improve Student Learning. NCREL Viewpoints, Volume 12

    Science.gov (United States)

    Gahala, Jan, Ed.

    2004-01-01

    "Viewpoints" is a multimedia package containing two audio CDs and a short, informative booklet. This volume of "Viewpoints" focuses on how technology can help improve student learning. The audio CDs provide the voices, or viewpoints, of various leaders from the education field who work closely with technology issues. Their…

  3. Technology-Critical Elements: Economic and Policy Perspectives

    Science.gov (United States)

    Eggert, R. G.

    2017-12-01

    Critical elements are those that provide essential functionality to modern engineered materials, have few ready substitutes and are subject to supply-chain risks or concerns about long-run availability. This paper provides economic and public-policy perspectives on critical elements. It suggests: that which elements are critical is situational and changes over time; that we are not running out of mineral-derived raw materials in a geologic sense but rather, for some elements, face scarcities that are technological, environmental, political or economic in nature; and that public policy's most important role over the longer term is fostering scientific and technological innovation, especially early stage research, that has the potential to overcome these scarcities.

  4. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II (this volume) describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Specific INEL problem areas/contaminants are identified along with technology solutions, the status of the technologies, precise science and technology needs, and implementation requirements. Volume III provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are referenced by a TEDS codenumber in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II.

  5. Technology transfer package on seismic base isolation - Volume III

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-14

    This Technology Transfer Package provides some detailed information for the U.S. Department of Energy (DOE) and its contractors about seismic base isolation. Intended users of this three-volume package are DOE Design and Safety Engineers as well as DOE Facility Managers who are responsible for reducing the effects of natural phenomena hazards (NPH), specifically earthquakes, on their facilities. The package was developed as part of DOE's efforts to study and implement techniques for protecting lives and property from the effects of natural phenomena and to support the International Decade for Natural Disaster Reduction. Volume III contains supporting materials not included in Volumes I and II.

  6. Information and Communication Technologies in Africa Volume 1 ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Volume 1 looks at the introduction, adoption, and utilization of ICTs at the community level. In various contexts – geographical, technological, socioeconomic, cultural, and institutional – the book explores the questions of community participation. It looks at how communities in sub-Saharan Africa have reacted to the changes ...

  7. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Volume III (this volume) provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are reference by a TEDS code number in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II. Data sheets are arranged alphanumerically by the TEDS code number in the upper right corner of each sheet.

  8. Shredder and incinerator technology for volume reduction of commercial transuranic wastes

    International Nuclear Information System (INIS)

    Oma, K.H.

    1986-06-01

    Pacific Northwest Laboratory (PNL) is evaluating alternatives and developing technology for treatment of radioactive wastes generated during commercial nuclear activities. Transuranic wastes that require volume reduction include spent HEPA filters, sample and analytical cell waste, and general process trash. A review of current technologies for volume reduction of these wastes led to the selection and testing of several low-speed shredder systems and three candidate incineration processes. The incinerators tested were the electrically heated control-led-air, gas-heated controlled-air, and rotary kiln. Equipment tests were conducted using simulated commercial transuranic wastes to provide a data base for the comparison of the various technologies. The electrically driven, low-speed shredder process was selected as the preferred method for size reduction of the wastes prior to incineration. All three incinerators effectively reduced the waste volume. Based on a technical and economic evaluation on the incineration processes, the recommended system for the commercial waste application is the gas-heated controlled-air incinerator with a single stage of shredding for feed pretreatment

  9. Technology learning in a global - local perspective: - the interplay between technology diffusion, niche markets and experience curves

    International Nuclear Information System (INIS)

    Martinsen, Thomas

    2010-01-01

    Preventing dangerous global climate change requires timely deployment of nascent energy technologies with zero or low Co2 emissions. Managing the shift to a common sustainable technology path calls for insight about the influence of global technological change on the national energy system. Moreover, national policies are required to promote the shift to the new technology path. This calls for methods to analyse the national energy system within a global perspective. The objective of the work presented in this thesis was to investigate interplay between technology diffusion, niche markets and technology learning from the perspective of a small open economy like Norway. More specifically, develop methods to include the influence of technology learning manifested in experience and learning curves into national energy-economy-environment models. Moreover, apply the methods to investigate the potential influence and sensitivity to technology learning in a small open economy. In this thesis three such methods have been developed, applied and its importance assessed using Norway as an example. In this work three models have been linked. They are the global Energy Technology Perspectives model operated by the International Energy Agency, the Norwegian Markal model at the Institute for Energy Technology and the macro economic model MSG6 at Statistics Norway. Method one and two has been developed to manage the interplay between the models. In a local perspective technology learning in the global market is perceived as spillover. Based upon a review of the characteristics of technological change and learning curves and its application to energy system modelling some criteria important for the parameterization and modelling of spillover in a small open economy are suggested. The first method incorporates spillover into the national Markal model. The second method establishes a soft-link between the national models. The soft-link served two purposes; to provide input on demand

  10. Using and choosing digital health technologies: a communications science perspective.

    Science.gov (United States)

    Ovretveit, John; Wu, Albert; Street, Richard; Thimbleby, Harold; Thilo, Friederike; Hannawa, Annegret

    2017-03-20

    Purpose The purpose of this paper is to explore a non-technical overview for leaders and researchers about how to use a communications perspective to better assess, design and use digital health technologies (DHTs) to improve healthcare performance and to encourage more research into implementation and use of these technologies. Design/methodology/approach Narrative overview, showing through examples the issues and benefits of introducing DHTs for healthcare performance and the insights that communications science brings to their design and use. Findings Communications research has revealed the many ways in which people communicate in non-verbal ways, and how this can be lost or degraded in digitally mediated forms. These losses are often not recognized, can increase risks to patients and reduce staff satisfaction. Yet digital technologies also contribute to improving healthcare performance and staff morale if skillfully designed and implemented. Research limitations/implications Researchers are provided with an introduction to the limitations of the research and to how communications science can contribute to a multidisciplinary research approach to evaluating and assisting the implementation of these technologies to improve healthcare performance. Practical implications Using this overview, managers are more able to ask questions about how the new DHTs will affect healthcare and take a stronger role in implementing these technologies to improve performance. Originality/value New insights into the use and understanding of DHTs from applying the new multidiscipline of communications science. A situated communications perspective helps to assess how a new technology can complement rather than degrade professional relationships and how safer implementation and use of these technologies can be devised.

  11. Web 2.0 Technologies and Building Online Learning Communities: Students' Perspectives

    Science.gov (United States)

    Abdelmalak, Mariam Mousa Matta

    2015-01-01

    The purpose of this action research was to explore students' perspectives regarding using Web 2.0 technologies to develop a community of learners. The course described in this study was a fully online course in an Educational Learning Technologies master's program at a medium-sized university in the U.S. Southwest. A variety of Web 2.0 tools…

  12. Energy technology perspectives - scenarios and strategies to 2050

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-11-03

    At their 2005 summit in Gleneagles, G8 leaders confronted questions of energy security and supply and lowering of CO{sub 2} emissions and decided to act with resolve and urgency. They called upon the International Energy Agency to provide advice on scenarios and strategies for a clean and secure energy future. Energy Technology Perspectives is a response to the G8 request. This work demonstrates how energy technologies can make a difference in a series of global scenarios to 2050. It reviews in detail the status and prospects of key energy technologies in electricity generation, buildings, industry and transport. It assesses ways the world can enhance energy security and contain growth in CO{sub 2} emissions by using a portfolio of current and emerging technologies. Major strategic elements of a successful portfolio are energy efficiency, CO{sub 2} capture and storage, renewables and nuclear power. 110 figs., 4 annexes.

  13. Large Deployable Reflector (LDR) system concept and technology definition study. Volume 2: Technology assessment and technology development plan

    Science.gov (United States)

    Agnew, Donald L.; Jones, Peter A.

    1989-01-01

    A study was conducted to define reasonable and representative LDR system concepts for the purpose of defining a technology development program aimed at providing the requisite technological capability necessary to start LDR development by the end of 1991. This volume presents thirteen technology assessments and technology development plans, as well as an overview and summary of the LDR concepts. Twenty-two proposed augmentation projects are described (selected from more than 30 candidates). The five LDR technology areas most in need of supplementary support are: cryogenic cooling; astronaut assembly of the optically precise LDR in space; active segmented primary mirror; dynamic structural control; and primary mirror contamination control. Three broad, time-phased, five-year programs were synthesized from the 22 projects, scheduled, and funding requirements estimated.

  14. Perspectives of Family Members on Using Technology in Youth Mental Health Care: A Qualitative Study.

    Science.gov (United States)

    Lal, Shalini; Daniel, Winnie; Rivard, Lysanne

    2017-06-23

    Information and communication technologies (ICTs) are increasingly recognized as having an important role in the delivery of mental health services for youth. Recent studies have evaluated young people's access and use of technology, as well as their perspectives on using technology to receive mental health information, services, and support; however, limited attention has been given to the perspectives of family members in this regard. The aim of this study was to explore the perspectives of family members on the use of ICTs to deliver mental health services to youth within the context of specialized early intervention for a first-episode psychosis (FEP). Six focus groups were conducted with family members recruited from an early intervention program for psychosis. Twelve family members participated in the study (target sample was 12-18, and recruitment efforts took place over the duration of 1 year). A 12-item semistructured focus group guide was developed to explore past experiences of technology and recommendations for the use of technology in youth mental health service delivery. A qualitative thematic analysis guided the identification and organization of common themes and patterns identified across the dataset. Findings were organized by the following themes: access and use of technology, potential negative impacts of technology on youth in recovery, potential benefits of using technology to deliver mental health services to youth, and recommendations to use technology for (1) providing quality information in a manner that is accessible to individuals of diverse socioeconomic backgrounds, (2) facilitating communication with health care professionals and services, and (3) increasing access to peer support. To our knowledge, this is among the first (or the first) to explore the perspectives of family members of youth being treated for FEP on the use of technology for mental health care. Our results highlight the importance of considering diverse experiences

  15. Dual-Use Space Technology Transfer Conference and Exhibition. Volume 2

    Science.gov (United States)

    Krishen, Kumar (Compiler)

    1994-01-01

    This is the second volume of papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools; systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development; perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; and robotics technologies.

  16. International Conference on Informatics and Communication Technologies for Societal Developmen

    CERN Document Server

    Bhojan, Anand; Peter, J

    2015-01-01

    This volume comprises research papers presented at the International Conference on Informatics and Communication Technologies for Societal Development (ICICTS 2014) held at Karunya University, India. The content focuses on the recent advancements in image or signal processing, computer vision, communication technologies, soft computing, advanced computing, data mining, and knowledge discovery. The primary objective of this volume is to facilitate advancement and application of the knowledge and to promote ideas that solve problems faced by society through cutting-edge technologies. The chapters contain selected articles from academicians, researchers, and industry experts in the form of frameworks, models, and architectures. Practical approaches, observations, and results of research that promotes societal development are also incorporated. This volume will serve as a useful compendium for interested readers and researchers working towards societal development from the technological perspective.

  17. Technology development multidimensional review for engineering and technology managers

    CERN Document Server

    Neshati, Ramin; Watt, Russell; Eastham, James

    2014-01-01

    Developing new products, services, systems, and processes has become an imperative for any firm expecting to thrive in today’s fast-paced and hyper-competitive environment.  This volume integrates academic and practical insights to present fresh perspectives on new product development and innovation, showcasing lessons learned on the technological frontier.  The first part emphasizes decision making.  The second part focuses on technology evaluation, including cost-benefit analysis, material selection, and scenarios. The third part features in-depth case studies to present innovation management tools, such as customer needs identification, technology standardization, and risk management. The fourth part highlights important international trends, such as globalization and outsourcing. Finally the fifth part explores social and political aspects.

  18. Workshop tools and methodologies for evaluation of energy chains and for technology perspective

    Energy Technology Data Exchange (ETDEWEB)

    Appert, O. [Institut Francais du Petrole (IFP), 92 - Rueil-Malmaison (France); Maillard, D. [Energy and Raw Materials, 75 - Paris (France); Pumphrey, D. [Energy Cooperation, US Dept. of Energy (United States); Sverdrup, G.; Valdez, B. [National Renewable Energy Laboratory, Golden, CO (United States); Schindler, J. [LB-Systemtechnik (LBST), GmbH, Ottobrunn (Germany); His, St.; Rozakis, St. [Centre International de Recherche sur Environnement Developpement (CIRED), 94 - Nogent sur Marne (France); Sagisaka, M. [LCA Research Centre (Japan); Bjornstad, D. [Oak Ridge National Laboratory, Oak Ridge, Tennessee (United States); Madre, J.L. [Institut National de Recherche sur les Transports et leur Securite, 94 - Arcueil (France); Hourcade, J.Ch. [Centre International de Recherche sur l' Environnement le Developpement (CIRED), 94 - Nogent sur Marne (France); Ricci, A.; Criqui, P.; Chateau, B.; Bunger, U.; Jeeninga, H. [EU/DG-R (Italy); Chan, A. [National Research Council (Canada); Gielen, D. [IEA-International Energy Associates Ltd., Fairfax, VA (United States); Tosato, G.C. [Energy Technology Systems Analysis Programme (ETSAP), 75 - Paris (France); Akai, M. [Agency of Industrial Science and technology (Japan); Ziesing, H.J. [Deutsches Institut fur Wirtschaftsforschung, DIW Berlin (Germany); Leban, R. [Conservatoire National des Arts et Metiers (CNAM), 75 - Paris (France)

    2005-07-01

    The aims of this workshop is to better characterize the future in integrating all the dynamic interaction between the economy, the environment and the society. It offers presentations on the Hydrogen chains evaluation, the micro-economic modelling for evaluation of bio-fuel options, life cycle assessment evolution and potentialities, the consumer valuation of energy technologies attributes, the perspectives for evaluation of changing behavior, the incentive systems and barriers to social acceptability, the internalization of external costs, the endogenous technical change in long-tem energy models, ETSAP/technology dynamics in partial equilibrium energy models, very long-term energy environment modelling, ultra long-term energy technology perspectives, the socio-economic toolbox of the EU hydrogen road-map, the combined approach using technology oriented optimization and evaluation of impacts of individual policy measures and the application of a suite of basic research portfolio management tools. (A.L.B.)

  19. A thermodynamic perspective on technologies in the Anthropocene : analyzing environmental sustainability

    NARCIS (Netherlands)

    Liao, Wenjie

    2012-01-01

    Technologies and sustainable development are interrelated from a thermodynamic perspective, with industrial ecology (IE) as a major point of access for studying the relationship in the Anthropocene. To offer insights into the potential offered by thermodynamics in the environmental sustainability

  20. Progressive and Regressive Aspects of Information Technology in Society: A Third Sector Perspective

    Science.gov (United States)

    Miller, Kandace R.

    2009-01-01

    This dissertation explores the impact of information technology on progressive and regressive values in society from the perspective of one international foundation and four of its technology-related programs. Through a critical interpretive approach employing an instrumental multiple-case method, a framework to help explain the influence of…

  1. Got risk? risk-centric perspective for spacecraft technology decision-making

    Science.gov (United States)

    Feather, Martin S.; Cornford, Steven L.; Moran, Kelly

    2004-01-01

    A risk-based decision-making methodology conceived and developed at JPL and NASA has been used to aid in decision making for spacecraft technology assessment, adoption, development and operation. It takes a risk-centric perspective, through which risks are used as a reasoning step to interpose between mission objectives and risk mitigation measures.

  2. Perspectives on ontology learning

    CERN Document Server

    Lehmann, J

    2014-01-01

    Perspectives on Ontology Learning brings together researchers and practitioners from different communities − natural language processing, machine learning, and the semantic web − in order to give an interdisciplinary overview of recent advances in ontology learning.Starting with a comprehensive introduction to the theoretical foundations of ontology learning methods, the edited volume presents the state-of-the-start in automated knowledge acquisition and maintenance. It outlines future challenges in this area with a special focus on technologies suitable for pushing the boundaries beyond the c

  3. Advances in production technology

    CERN Document Server

    2015-01-01

    This edited volume contains the selected papers presented at the scientific board meeting of the German Cluster of Excellence on “Integrative Production Technology for High-Wage Countries”,  held in November 2014. The topical structure of the book is clustered in six sessions: Integrative Production Technology, Individualised Production, Virtual Production Systems, Integrated Technologies, Self-Optimising Production Systems and Human Factors in Production Technology. The Aachen perspective on a holistic theory of production is complemented by conference papers from external leading researchers in the fields of production, materials science and bordering disciplines. The target audience primarily comprises research experts and practitioners in the field but the book may also be beneficial for graduate students.

  4. A PERSPECTIVE OF MALAY QUATRAIN IN MEDIA TECHNOLOGY

    OpenAIRE

    Arbaie SUJUD; Nik Rafidah NIK AFFENDI; Normaliza ABD RAHIM; Siti Nur ALIAA ROSLAN

    2012-01-01

    Malay quatrain has been introduced since long time ago among the Malay communities. It has also been used until today in formal ceremonies like the weddings, meetings and speeches. The Malay quatrain has also been taught in schools in order to inculcate the culture among children at young age. Therefore, this study ascertains the perspective of Malay quatrain in the media technology. The objectives of the study were to identify the types of Malay quatrain favored by the students and discuss t...

  5. US long distance fiber optic networks: Technology, evolution and advanced concepts. Volume 2: Fiber optic technology and long distance networks

    Science.gov (United States)

    1986-10-01

    The study projects until 2000 the evolution of long distance fiber optic networks in the U.S. Volume 1 is the Executive Summary. Volume 2 focuses on fiber optic components and systems that are directly related to the operation of long-haul networks. Optimistic, pessimistic and most likely scenarios of technology development are presented. The activities of national and regional companies implementing fiber long haul networks are also highlighted, along with an analysis of the market and regulatory forces affecting network evolution. Volume 3 presents advanced fiber optic network concept definitions. Inter-LATA traffic is quantified and forms the basis for the construction of 11-, 15-, 17-, and 23-node networks. Using the technology projections from Volume 2, a financial model identifies cost drivers and determines circuit mile costs between any two LATAs. A comparison of fiber optics with alternative transmission concludes the report.

  6. Global power knowledge science and technology in international affairs

    CERN Document Server

    Barth, Kai-Henrik

    2006-01-01

    Osiris annualy examines a particular topic in the history of science, bringing together experts in the field to consider multiple aspects of the time period, episode, or theme. Volume 21, Historical Perspectives on Science, Technology, and International Affairs, explores the ways in which scientists and issues in science and technology have played significant roles in foreign policy and international relations, especially since the Second World War.

  7. Knowledge Perspectives of New Product Development A Comparative Approach

    CERN Document Server

    Carayannis, Elias; Dossani, Rafiq

    2012-01-01

    New Product Development (NPD) is about the ideation, formulation, and implementation of new and superior solutions in the market. Beyond the obvious need for organizations to innovate in order to compete, embedded in any NPD program are knowledge, technological expertise, and the social networks that convert these capabilities into offerings that create value at every level—for customers, industries, communities, and regions.    This volume provides an array of knowledge perspective in NPD across multiple levels of analysis and geographic regions, including Europe, the United States, China, Japan, and India, to explore the dynamics of NPD in today’s global environment.   Presenting case studies from such industries as ICT services, semiconductors, software development, bio-technology, higher education, and even safety for children’s toys, and drawing from a variety of theoretical perspectives, including technology and knowledge management, sociology, economic geography, and organizational behavior, ...

  8. Clean energy technologies : perspectives and recent progress

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, G. [Natural Resources Canada, Ottawa, ON (Canada). Office of Energy Research and Development

    2006-07-01

    There is a need to move toward a bio-based economy that offers new ways of thinking and new approaches to energy consumption and use. Bioenergy technologies can complement highly efficient fossil fuels with renewable and sustainable alternatives to achieve improved health and air quality, while reducing greenhouse gases. Perspectives on the bio-based economy and recent progress in bioenergy technologies were addressed in this presentation. The purpose was to explore the opportunities and challenges of using biomass for energy systems in industrial settings. The presentation provided information on current research being undertaken in bioenergy in the agricultural and forest fibre industries. Information on the Canadian Biomass Innovation Network (CBIN), which consists of federal researchers, program managers, policy makers and expert advisors and on its thermochemical energy systems were discussed in detail. CBIN's mission, vision, priorities, outputs, and funding were identified. Thermochemical conversion research under CBIN relates to combustion, gasification, and pyrolysis. tabs., figs.

  9. Satellite Power Systems (SPS) concept definition study. Volume 6: SPS technology requirements and verification

    Science.gov (United States)

    Hanley, G.

    1978-01-01

    Volume 6 of the SPS Concept Definition Study is presented and also incorporates results of NASA/MSFC in-house effort. This volume includes a supporting research and technology summary. Other volumes of the final report that provide additional detail are as follows: (1) Executive Summary; (2) SPS System Requirements; (3) SPS Concept Evolution; (4) SPS Point Design Definition; (5) Transportation and Operations Analysis; and Volume 7, SPS Program Plan and Economic Analysis.

  10. Status and future perspectives of PWR and comparing views on WWER fuel technology

    International Nuclear Information System (INIS)

    Weidinger, H.

    2003-01-01

    The main purpose of this paper is to give an overview on status and future perspectives of the Western PWR fuel technology. For easer understanding and correlating, some comparing views to the WWER fuel technology are provided. This overview of the PWR fuel technology of course can not go into the details of the today used designs of fuel, fuel rods and fuel assemblies. However, it tries to describe the today achieved capability of PWR fuel technology with regard to reliability, efficiency and safety

  11. Technology transfer package on seismic base isolation - Volume II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-14

    This Technology Transfer Package provides some detailed information for the U.S. Department of Energy (DOE) and its contractors about seismic base isolation. Intended users of this three-volume package are DOE Design and Safety Engineers as well as DOE Facility Managers who are responsible for reducing the effects of natural phenomena hazards (NPH), specifically earthquakes, on their facilities. The package was developed as part of DOE's efforts to study and implement techniques for protecting lives and property from the effects of natural phenomena and to support the International Decade for Natural Disaster Reduction. Volume II contains the proceedings for the Short Course on Seismic Base Isolation held in Berkeley, California, August 10-14, 1992.

  12. Barriers affecting successful technology enablement of supply chain: An Indian perspective

    Science.gov (United States)

    Arora, R.; Haleem, A.; Farooquie, J. A.

    2018-03-01

    In order to compete, organizations need to focus on improving supply chain and technology acts as a major enabler. Technology enablement of supply chain has not always been successful and has been examined by many researchers. The purpose of this paper is to do a systematic literature review of technology enabled supply chain from a strategic viewpoint. The literature is examined from two perspectives. Firstly, it studies the growing interest in technology-enabled supply chain in India. Secondly, it studies barriers affecting technology enablement of supply chain. The literature review identifies that technology enabled supply chain helps in improving performance via effective decision making, monitoring entire supply chain, faster reaction to customer service problems, etc. The research has emphasized the importance of 12 barriers affecting technology enablement. This research will help as a guide for practitioners in order to successfully implement technology and fills the gap in existing literature by highlighting and consolidating the significant research work done in past.

  13. Tools and methodologies for evaluation of energy chains and for technology perspective

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    of bio-fuel options (S. His / S. Rozakis); LCA/Evolution and potentialities (M. Sagisaka); The consumer valuation of energy technologies attributes (D. Bjornstad); Perspectives for evaluation of changing behaviour (J.L. Madre); Incentive systems and barriers to social acceptability (J.C. Hourcade); Internalization of external costs (A. Ricci); ETP/Energy technology perspectives project (D. Gielen); ETSAP/Technology dynamics in partial equilibrium energy models (G.C. Tosato); Endogenous technical change in long-term energy models (P. Criqui); Very long-term energy environment modelling (B. Chateau); Ultra long-term energy technology perspectives (M. Akai); The socio-economic toolbox of the EU Hydrogen Road-map (U. Buenger/H. Jeeninga); Combined approach using technology-oriented optimization and evaluation of impacts of individual policy measures (H.J. Ziesing); Application of a suite of basic research portfolio management tools (B. Valdez); Conclusions (R. Leban)

  14. Tools and methodologies for evaluation of energy chains and for technology perspective

    International Nuclear Information System (INIS)

    2005-01-01

    bio-fuel options (S. His / S. Rozakis); LCA/Evolution and potentialities (M. Sagisaka); The consumer valuation of energy technologies attributes (D. Bjornstad); Perspectives for evaluation of changing behaviour (J.L. Madre); Incentive systems and barriers to social acceptability (J.C. Hourcade); Internalization of external costs (A. Ricci); ETP/Energy technology perspectives project (D. Gielen); ETSAP/Technology dynamics in partial equilibrium energy models (G.C. Tosato); Endogenous technical change in long-term energy models (P. Criqui); Very long-term energy environment modelling (B. Chateau); Ultra long-term energy technology perspectives (M. Akai); The socio-economic toolbox of the EU Hydrogen Road-map (U. Buenger/H. Jeeninga); Combined approach using technology-oriented optimization and evaluation of impacts of individual policy measures (H.J. Ziesing); Application of a suite of basic research portfolio management tools (B. Valdez); Conclusions (R. Leban)

  15. Social acceptance of solar energy technologies in China-End users' perspective

    International Nuclear Information System (INIS)

    Yuan Xueliang; Zuo Jian; Ma Chunyuan

    2011-01-01

    Energy is essential to human beings. The increasing demand of energy has triggered the public scrutiny on the sustainability issues associated with the energy production and transmission. There have been a large number of studies focusing on reducing the environmental impacts associated with the energy sector. Renewable energy sources such as solar energy have been prompted to mitigate these environmental impacts. This research adopted a quantitative approach to investigate the social acceptance of solar energy technologies from end users' perspective in Shandong province, China. A large scale questionnaire survey was conducted. The results show that there is a considerable high level of social acceptance and public awareness of solar water heater. However, another major application of solar energy, solar PV has not gained a high level of social acceptance or public awareness in Shandong. This study provides useful references for policy makers to further promote the utilization of solar energy innovations. - Research Highlights: → Social acceptance of solar energy technologies from end users' perspective is investigated by a large scale questionnaire survey. → Higher level of social acceptance and public awareness of solar water heater than solar PV. → Impact factors for social acceptance of solar energy technologies are analyzed.

  16. Patent Value: A Business Perspective for Technology Startups

    Directory of Open Access Journals (Sweden)

    Angela de Wilton

    2011-12-01

    Full Text Available In the last year, news headlines have highlighted record patent infringement settlements, multibillion dollar auctions of large corporate patent portfolios, and ongoing patent battles between key technology industry players. Despite this acknowledgment of the significant value of patents for large corporations, many small technology companies are understandably more focused on the near-term costs of obtaining a patent rather than future value. Costs may seem prohibitive to an early stage technology startup. Some software startups question whether patents are relevant to their business. In practice, effective intellectual property (IP strategy and management is dependent on many factors, such as technology or industry sector, size and maturity of the business, technology lifecycle, and the business and market environment. IP strategy must be aligned to business strategy from the outset. By considering IP in the broader context of the overall business plan and the competitive environment, opportunities for generating increased return on R&D investment and added business value through patents or other forms of IP can be recognized early on. This approach ensures that a decision about whether or not to patent is driven by business reasons rather than budget constraints. This article examines the costs and benefits of patents from the perspective of early-stage technology startups and growing businesses, and it provides some general guidance on best practices for developing an IP and patent activity plan and for building a patent portfolio that appropriately supports business objectives.

  17. Feasibility study on application of volume acid fracturing technology to tight gas carbonate reservoir development

    Directory of Open Access Journals (Sweden)

    Nianyin Li

    2015-09-01

    Full Text Available How to effectively develop tight-gas carbonate reservoir and achieve high recovery is always a problem for the oil and gas industry. To solve this problem, domestic petroleum engineers use the combination of the successful experiences of North American shale gas pools development by stimulated reservoir volume (SRV fracturing with the research achievements of Chinese tight gas development by acid fracturing to propose volume acid fracturing technology for fractured tight-gas carbonate reservoir, which has achieved a good stimulation effect in the pilot tests. To determine what reservoir conditions are suitable to carry out volume acid fracturing, this paper firstly introduces volume acid fracturing technology by giving the stimulation mechanism and technical ideas, and initially analyzes the feasibility by the comparison of reservoir characteristics of shale gas with tight-gas carbonate. Then, this paper analyzes the validity and limitation of the volume acid fracturing technology via the analyses of control conditions for volume acid fracturing in reservoir fracturing performance, natural fracture, horizontal principal stress difference, orientation of in-situ stress and natural fracture, and gives the solution for the limitation. The study results show that the volume acid fracturing process can be used to greatly improve the flow environment of tight-gas carbonate reservoir and increase production; the incremental or stimulation response is closely related with reservoir fracturing performance, the degree of development of natural fracture, the small intersection angle between hydraulic fracture and natural fracture, the large horizontal principal stress difference is easy to form a narrow fracture zone, and it is disadvantageous to create fracture network, but the degradable fiber diversion technology may largely weaken the disadvantage. The practices indicate that the application of volume acid fracturing process to the tight-gas carbonate

  18. Energy technology perspectives: scenarios and strategies to 2050 [Russian version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    At their 2005 summit in Gleneagles, G8 leaders confronted questions of energy security and supply and lowering of CO{sub 2} emissions and decided to act with resolve and urgency. They called upon the International Energy Agency to provide advice on scenarios and strategies for a clean and secure energy future. Energy Technology Perspectives is a response to the G8 request. This work demonstrates how energy technologies can make a difference in a series of global scenarios to 2050. It reviews in detail the status and prospects of key energy technologies in electricity generation, buildings, industry and transport. It assesses ways the world can enhance energy security and contain growth in CO{sub 2} emissions by using a portfolio of current and emerging technologies. Major strategic elements of a successful portfolio are energy efficiency, CO{sub 2} capture and storage, renewables and nuclear power. 110 figs., 4 annexes.

  19. A technological contingency perspective on the depth and scope of international outsourcing

    NARCIS (Netherlands)

    Mol, M.J.; Pauwels, Pieter; Matthyssens, P.; Quintens, L.

    2004-01-01

    In this study, we present and test a technological contingency perspective on two dimensions of international outsourcing: depth and scope. The depth of international outsourcing refers to the ratio of foreign to total outsourcing. The scope of international outsourcing captures the degree of

  20. Technology transfer package on seismic base isolation - Volume I

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-14

    This Technology Transfer Package provides some detailed information for the U.S. Department of Energy (DOE) and its contractors about seismic base isolation. Intended users of this three-volume package are DOE Design and Safety Engineers as well as DOE Facility Managers who are responsible for reducing the effects of natural phenomena hazards (NPH), specifically earthquakes, on their facilities. The package was developed as part of DOE's efforts to study and implement techniques for protecting lives and property from the effects of natural phenomena and to support the International Decade for Natural Disaster Reduction. Volume I contains the proceedings of the Workshop on Seismic Base Isolation for Department of Energy Facilities held in Marina Del Rey, California, May 13-15, 1992.

  1. A business case for Smart Grid technologies: A systemic perspective

    International Nuclear Information System (INIS)

    Giordano, Vincenzo; Fulli, Gianluca

    2012-01-01

    The digitalization of the electricity grid opens the way to bundle value added services to the electricity commodity, and possibly shift business value to electricity services in line with the notions of efficiency, conservation and sustainability. In this context, market forces should be mobilized within the boundaries of energy policy goals to contribute to the massive investments that are required to fulfill the Smart Grid vision. In this paper, we present a systemic perspective aimed at establishing technical and economic synergies that may improve the business cases of individual different Smart Grid technologies and contribute to reverse the consumption-driven paradigm of the electricity sector. Our analysis is supported by evidence from applications in the electric vehicle and smart meter ecosystems. Throughout the paper, an EU (European Union) perspective is primarily considered. - Highlights: ► We show how the analysis of systemic effects can play a fundamental role in offering a business case to Smart Grid technology and in providing some guidance to new policy interventions and initiatives. ► We base our discussion on two case studies: the set-up of business platforms for (1) Electric Vehicles and E-mobility services and (2) Smart Meters and Smart Home Services. ► We highlight how new business arrangements might leverage technological/business synergies, foster investments and shift business value to electricity services. ► We discuss possible downsides and challenges such as privacy concerns, dominant positions in new business platforms, and consumers' resistance.

  2. New energy technologies part 2, storage and low emission technologies

    International Nuclear Information System (INIS)

    Sabonnadiere, J.C.

    2007-01-01

    After a first volume devoted to renewable energy sources, this second volume follows the first one and starts with a detailed presentation of energy storage means and technologies. This first chapter is followed by a prospective presentation of innovative concepts in the domain of nuclear energy. A detailed analysis of cogeneration systems, which aim at optimizing the efficiency of heat generation facilities by the adjunction of a power generation unit, allows to outline the advantages and limitations of this process. The next two chapters deal with the development of hydrogen industry as energy vector and with its application to power generation using fuel cells in several domains of use. Content: - forewords: electric power, the new paradigm, the decentralized generation, the energy conversion means; - chapter 1: energy storage, applications in relation with the electricity vector (energy density, storage problems, storage systems); - chapter 2: nuclear fission today and tomorrow, from rebirth to technological jump (2006 energy green book, keeping all energy options opened); nuclear energy in the world: 50 years of industrial experience; main actors: common needs, international vision and strategic instruments; at the eve of a technological jump: research challenges and governmental initiatives; generation 2 (today): safety of supplies and respect of the environment; generation 3 (2010): rebirth with continuous improvements; generation 4 (2040): technological jump to satisfy new needs; education and training: general goals; conclusion: nuclear power as part of the solution for a sustainable energy mix; - chapter 3: cogeneration (estimation of cogeneration potential, environmental impact, conclusions and perspectives); - chapter 4: hydrogen as energy vector (context, energy vector of the future, hydrogen generation, transport, distribution and storage; applications of hydrogen-energy, risks, standards, regulations and acceptability; hydrogen economics; hydrogen

  3. Religious architecture: anthropological perspectives

    NARCIS (Netherlands)

    Verkaaik, O.

    2013-01-01

    Religious Architecture: Anthropological Perspectives develops an anthropological perspective on modern religious architecture, including mosques, churches and synagogues. Borrowing from a range of theoretical perspectives on space-making and material religion, this volume looks at how religious

  4. Propulsion Control Technology Development in the United States A Historical Perspective

    Science.gov (United States)

    Jaw, Link C.a; Garg, Sanjay

    2005-01-01

    This paper presents a historical perspective of the advancement of control technologies for aircraft gas turbine engines. The paper primarily covers technology advances in the United States in the last 60 years (1940 to approximately 2002). The paper emphasizes the pioneering technologies that have been tested or implemented during this period, assimilating knowledge and experience from industry experts, including personal interviews with both current and retired experts. Since the first United States-built aircraft gas turbine engine was flown in 1942, engine control technology has evolved from a simple hydro-mechanical fuel metering valve to a full-authority digital electronic control system (FADEC) that is common to all modern aircraft propulsion systems. At the same time, control systems have provided engine diagnostic functions. Engine diagnostic capabilities have also evolved from pilot observation of engine gauges to the automated on-board diagnostic system that uses mathematical models to assess engine health and assist in post-flight troubleshooting and maintenance. Using system complexity and capability as a measure, we can break the historical development of control systems down to four phases: (1) the start-up phase (1942 to 1949), (2) the growth phase (1950 to 1969), (3) the electronic phase (1970 to 1989), and (4) the integration phase (1990 to 2002). In each phase, the state-of-the-art control technology is described and the engines that have become historical landmarks, from the control and diagnostic standpoint, are identified. Finally, a historical perspective of engine controls in the last 60 years is presented in terms of control system complexity, number of sensors, number of lines of software (or embedded code), and other factors.

  5. Energy perspectives 2035 - Volume 4, side-notes; Die Energieperspektiven 2035 - Band 4: Exkurse. Einzelthemen, wie fossile Energieressourcen, Einfluss der Klimaerwaermung, Flugverkehr, Ueberblick ueber andere Energieperspektiven des Energiesektors

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-06-15

    This comprehensive report published by the Swiss Federal Office of Energy (SFOE) presents a number of side-notes pertaining to the first three volumes of the Energy Perspectives series of reports. Various topics are discussed by the authors of the first three volumes of the perspectives in the meetings held by the Energy Perspectives Working Group. The sixteen side-notes presented here cover the following topics: General conditions, fossil resources, the influence of climate warming, CO{sub 2} emissions trading (Joint Implementation JI and Clean Development Mechanism CDM), definition of potentials, air traffic, imported renewable electricity, hydro power, electricity cost calculation, sensitivity analysis of centralised power production facilities, heat-pumps and their power consumption, cold spells and heat-waves, risk and its perception, the 2000-Watt society and international and national energy perspectives

  6. Incorporating a Socio-Ecological-Technological Systems (SETS) perspective into the adaptive management framework

    Science.gov (United States)

    Incorporating a social-ecological-technological systems (SETS) perspective to the adaptive management process requires that stakeholders and managers conceptualize restoration projects as part of coupled human and natural systems and assess underlying social drivers and accrued b...

  7. Perspectives of energy technologies: scenarios and strategies at the 2050 vista

    International Nuclear Information System (INIS)

    2008-01-01

    Every two years, the International Energy Agency (IEA) publishes the 'Energy Technology Perspectives' (ETP) report which analyses the foreseeable energy scenarios and strategies at the 2050 vista and stresses on the best available technologies. For the first time, the IEA describes in this study a scenario allowing to divide by two the CO 2 emissions at the world scale, i.e. compatible with the 'factor 4' scenario of industrialized countries. The study estimates the R and D needs and the necessary additional investments to meet the different tendentious and voluntaristic scenarios proposed by the IEA. This 15. session of the cycle of energy-climate conferences aimed at presenting, from the ETP 2008 study, a thorough examination of the present day situation and perspectives of existing or future 'clean' energy technologies through the analysis of several scenarios. An examination of the interpretation of these scenarios at the France and European levels is made in order to define what should be the trends of public policies and international cooperation. This document gathers the transparencies of the two presentations given during this conference. The first presentation by Pieter Boot, Director of the Office of Sustainable Energy Policy and Technology of IEA, makes a synthesis of the ETP study and presents the recommendations of the agency. The second presentation by Olivier Appert, President of the French institute of petroleum (IFP), gives a counterpoint of the first presentation by considering the financing and acceptance aspects, in particular from the French point of view. Finally a debate with the audience completes the presentations. (J.S.)

  8. Clean Coal Technologies in China: Current Status and Future Perspectives

    Directory of Open Access Journals (Sweden)

    Shiyan Chang

    2016-12-01

    Full Text Available Coal is the dominant primary energy source in China and the major source of greenhouse gases and air pollutants. To facilitate the use of coal in an environmentally satisfactory and economically viable way, clean coal technologies (CCTs are necessary. This paper presents a review of recent research and development of four kinds of CCTs: coal power generation; coal conversion; pollution control; and carbon capture, utilization, and storage. It also outlines future perspectives on directions for technology research and development (R&D. This review shows that China has made remarkable progress in the R&D of CCTs, and that a number of CCTs have now entered into the commercialization stage.

  9. Perspectives of energy technologies: scenarios and strategies at the 2050 vista; Perspectives des technologies de l'energie: scenarios et strategies a l'horizon 2050

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    Every two years, the International Energy Agency (IEA) publishes the 'Energy Technology Perspectives' (ETP) report which analyses the foreseeable energy scenarios and strategies at the 2050 vista and stresses on the best available technologies. For the first time, the IEA describes in this study a scenario allowing to divide by two the CO{sub 2} emissions at the world scale, i.e. compatible with the 'factor 4' scenario of industrialized countries. The study estimates the R and D needs and the necessary additional investments to meet the different tendentious and voluntaristic scenarios proposed by the IEA. This 15. session of the cycle of energy-climate conferences aimed at presenting, from the ETP 2008 study, a thorough examination of the present day situation and perspectives of existing or future 'clean' energy technologies through the analysis of several scenarios. An examination of the interpretation of these scenarios at the France and European levels is made in order to define what should be the trends of public policies and international cooperation. This document gathers the transparencies of the two presentations given during this conference. The first presentation by Pieter Boot, Director of the Office of Sustainable Energy Policy and Technology of IEA, makes a synthesis of the ETP study and presents the recommendations of the agency. The second presentation by Olivier Appert, President of the French institute of petroleum (IFP), gives a counterpoint of the first presentation by considering the financing and acceptance aspects, in particular from the French point of view. Finally a debate with the audience completes the presentations. (J.S.)

  10. Energy and the Environment: Volume 24

    International Nuclear Information System (INIS)

    Socolow, R.H.

    1999-01-01

    The 24 papers in this volume are entitled: The art of energy efficiency--Protecting the environment with better technology; On the road to global ecology; Best practices for renewable energy implementation--Integrating end-user and commercial-sector opportunities and constraints; Biomass conversion to fuels; Changing trends in greenhouse gases other than carbon dioxide; Economic growth, liberalization, and the environment--A review of the evidence; Harmful algal blooms--A model for emergence of pathogenic microorganisms under conditions of ecological stress; Enhancing the performance of nuclear power reactors--Issues and opportunities; Environmental issues along the US-Mexico border--Drivers of change and the response of citizens and institutions; Ethics and international business; Fuel cells; High-level nuclear waste--The status of Yucca Mountain; Hydrogen production, transmission, and distribution; It's not easy being green--Innovative environmental technologies enhance hydropower's role in sustainable development; Megacities and the atmosphere; Methods for attributing ambient air pollutants to emission sources; Nuclear energy in the twenty-first century--Examination of a contentious subject; Pollution and human health in the St. Lawrence estuary; Southern perspectives in technology transfer; The post-Kyoto regime on climate change--Southern perspectives; Flexibility in the timing and mechanisms of greenhouse gas controls--A review of economic arguments; How much is energy R and D worth as insurance; A review of technical change in assessments of climate policy; and Energy technology and global change--Modeling techniques developed at NASA

  11. Diffusion of renewable energy technologies - barriers and stakeholders' perspectives

    DEFF Research Database (Denmark)

    Reddy, S.; Painuly, Jyoti P.

    2004-01-01

    State, India, as a case study, the paper develops a systematic classification of barriers to the adoption of RETs (economic, technological, market and institutional) and ranking them based on the perceptions of various stakeholders. The results provide evidence of how the consumers receive RET...... information and make decisions using their limited analytical capabilities. The analysis is used to enhance the knowledge by introducing ideas based on behavioural theory. Not only do these ideas help understanding the consumer perspective, they also help develop policy interventions. The aim is to define...

  12. Stratified charge rotary engine critical technology enablement. Volume 2: Appendixes

    Science.gov (United States)

    Irion, C. E.; Mount, R. E.

    1992-01-01

    This second volume of appendixes is a companion to Volume 1 of this report which summarizes results of a critical technology enablement effort with the stratified charge rotary engine (SCRE) focusing on a power section of 0.67 liters (40 cu. in.) per rotor in single and two rotor versions. The work is a continuation of prior NASA Contracts NAS3-23056 and NAS3-24628. Technical objectives are multi-fuel capability, including civil and military jet fuel and DF-2, fuel efficiency of 0.355 Lbs/BHP-Hr. at best cruise condition above 50 percent power, altitude capability of up to 10Km (33,000 ft.) cruise, 2000 hour TBO and reduced coolant heat rejection. Critical technologies for SCRE's that have the potential for competitive performance and cost in a representative light-aircraft environment were examined. Objectives were: the development and utilization of advanced analytical tools, i.e. higher speed and enhanced three dimensional combustion modeling; identification of critical technologies; development of improved instrumentation; and to isolate and quantitatively identify the contribution to performance and efficiency of critical components or subsystems. A family of four-stage third-order explicit Runge-Kutta schemes is derived that required only two locations and has desirable stability characteristics. Error control is achieved by embedding a second-order scheme within the four-stage procedure. Certain schemes are identified that are as efficient and accurate as conventional embedded schemes of comparable order and require fewer storage locations.

  13. Some relevant questions in science education from the perspective Science- Technology-Society

    Directory of Open Access Journals (Sweden)

    Prieto, Teresa;

    2012-01-01

    Full Text Available In this article, some of the answers given at this time to three classic questions related to science teaching: why teach science?, what kind of science to teach?, and how to teach it?, are analyzed from a Science-Technology- Society perspective (STS. It argues for the need to prepare future citizens to make responsible decisions on matters related to science and technology in the XXI century, and the convenience of using socio-scientific issues in the science classroom. Finally, the analysis is exemplified in two cases: food consumption and energy consumption.

  14. A reliable and consistent production technology for high volume compacted graphite iron castings

    Directory of Open Access Journals (Sweden)

    Liu Jincheng

    2014-07-01

    Full Text Available The demands for improved engine performance, fuel economy, durability, and lower emissions provide a continual challenge for engine designers. The use of Compacted Graphite Iron (CGI has been established for successful high volume series production in the passenger vehicle, commercial vehicle and industrial power sectors over the last decade. The increased demand for CGI engine components provides new opportunities for the cast iron foundry industry to establish efficient and robust CGI volume production processes, in China and globally. The production window range for stable CGI is narrow and constantly moving. Therefore, any one step single addition of magnesium alloy and the inoculant cannot ensure a reliable and consistent production process for complicated CGI engine castings. The present paper introduces the SinterCast thermal analysis process control system that provides for the consistent production of CGI with low nodularity and reduced porosity, without risking the formation of flake graphite. The technology is currently being used in high volume Chinese foundry production. The Chinese foundry industry can develop complicated high demand CGI engine castings with the proper process control technology.

  15. Technological shape and size: A disaggregated perspective on sectoral innovation systems in renewable electrification pathways

    DEFF Research Database (Denmark)

    Hansen, Ulrich Elmer; Gregersen, Cecilia; Lema, Rasmus

    2018-01-01

    important analytical implications because the disaggregated perspective allows us to identify trajectories that cut across conventionally defined core technologies. This is important for ongoing discussions of electrification pathways in developing countries. We conclude the paper by distilling......The sectoral innovation system perspective has been developed as an analytical framework to analyse and understand innovation dynamics within and across various sectors. Most of the research conducted on sectoral innovation systems has focused on an aggregate-level analysis of entire sectors....... This paper argues that a disaggregated (sub-sectoral) focus is more suited to policy-oriented work on the development and diffusion of renewable energy, particularly in countries with rapidly developing energy systems and open technology choices. It focuses on size, distinguishing between small-scale (mini...

  16. Integrating cell phones and mobile technologies into public health practice: a social marketing perspective.

    Science.gov (United States)

    Lefebvre, Craig

    2009-10-01

    Mobile communications are being used for many purposes, from instant messaging (IM), mobile or microblogging (Twitter), social networking sites (Facebook, MySpace), e-mail to basic voicemail. A brief background on cell phone and mobile technology use in public health is reviewed. The focus of the article is framing the use of mobile technologies in public health from a social marketer's perspective--using the 4 Ps marketing mix as a guide.

  17. Distributed technologies in California's energy future: A preliminary report. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, M.; Craig, P.; McGuire, C.B.; Simmons, M. (eds.)

    1977-09-01

    The chapters in Volume 2 of Distributed Energy Systems in California's Future are: Environmental Impacts of Alternative Energy Technologies for California; Land Use Configurations and the Utilization of Distributive Energy Technology; Land Use Implications of a Dispersed Energy Path; Belief, Behavior, and Technologies as Driving Forces in Transitional Stages--The People Problem in Dispersed Energy Futures; Development of an Energy Attitude Survey; Interventions to Influence Firms Toward the Adoption of ''Soft'' Energy Technology; The Entry of Small Firms into Distributed Technology Energy Industries; Short-Term Matching of Supply and Demand in Electrical Systems with Renewable Sources; Vulnerability of Renewable Energy Systems; and District Heating for California.

  18. The economic impact of regional waste disposal on advanced volume reduction technologies

    International Nuclear Information System (INIS)

    McArthur, W.C.; Kniazewycz, B.G.

    1983-01-01

    Waste volume reduction has received increased emphasis over the past decade as annual operating costs have risen from $250,000/year to $3,500,000 for 1983. Emphasis has been given to developing and designing into new nuclear plants process and DAW volume reduction technologies such as fluidized-bed dryers incinerators, and evaporative-solidification systems. The basis for these systems was originally the correct perception that a crisis would be reached with the, then available, shallow land disposal sites which would increase costs substantially and possible jeopardize power plant operations. With the passage of the Low-Level Waste Policy Act of 1980 and increased emphasis on interim on-site storage of low-level waste, the ''economics of volume reduction'' are susceptible to increased uncertainties. This paper reviews some previous volume reduction economic analyses and evaluates the revised economics based upon the development of regional waste disposal sites, improved waste generation and processing practices, and the increased use of interim on-site storage. Several case studies are presented

  19. A plasma melting technology for volume reduction of noncombustible radioactive waste in Korea

    International Nuclear Information System (INIS)

    Song, Myung Jae; Moon, Young Pyo

    1998-01-01

    In Korea, there is a strong need for the development of radioactive waste volume reduction technology. Korea Electric Power Research Institute (KEPRI) has been searching for ways to reduce the radioactive volume significantly and to produce stable waste forms. In particular, plasma treatment technology has caught KEPR's attention for treating noncombustible radwaste because this technology may far surpass conventional methods. The potential for greater control of temperature, faster reaction times, better control of processing, lower capital costs, greater throughput and more efficient use of energy is there. For the plasma melting study of noncombustible waste, KEPRI has leased a lab scale multipurpose plasma furnace system and performed preliminary tests. Using simulated noncombustible waste based on field survey data from nuclear power plants, lab scale melting experiments have been carried out. The properties of molten slag vary with additives and noncombustible waste materials. KEPRI's current study is focused on finding an optimum composition ratio of various noncombustible wastes for melting, investigating physical properties of molten slag, and obtaining operating parameters for continuous operation. (author)

  20. [Educational geronto-technology for ostomized seniors from a complexity perspective].

    Science.gov (United States)

    Barros, Edaiane Joana Lima; Santos, Silvana Sidney Costa; Gomes, Giovana Calcagno; Erdmann, Alacoque Lorenzini

    2012-06-01

    We aimed to present the educational booklet as a geronto-technological product for caring for ostomized seniors from a complexity perspective. This was accomplished in the second semester of 2007 in a hospital in the south of Brazil. The data were collected through interviews and presented in the form of an educational booklet. The booklet was validated by ostomized seniors and by a nurse who had been working with these elderly patients. The booklet was presented as a geronto-technology able to help ostomized seniors and their families understand the rights of ostomized people; concepts and types of stomas; care of ostomy; and the importance of the family and the support group for care. In conclusion, the educational booklet is presented as a health promotion tool which makes the health educative process easier.

  1. Proceedings of the environmental technology through industry partnership conference. Volume 1

    International Nuclear Information System (INIS)

    Kothari, V.P.

    1995-10-01

    The overall objective of this conference was to review the latest environmental and waste management technologies being developed under the sponsorship of METC. The focus of this conference was also to address the accomplishments and barriers affecting private sector, and lay the groundwork for future technology development initiatives and opportunities. 26 presentations were presented in: Mixed waste characterization, treatment, and disposal; Contaminant plume containment and remediation; and Decontamination and decommissioning. In addition there were 10 Focus Area presentations, 31 Poster papers covering all Focus Areas, and two panel discussions on: Mixed waste characterization, treatment, and disposal issues; and the application, evaluation, and acceptance of in-situ and ex-situ plume remediation technologies. Volume 1 contains the keynote address, 15 poster papers, 5 papers on mixed waste characterization, treatment, and disposal, and 13 papers on decontamination and decommissioning. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

  2. Proceedings of the environmental technology through industry partnership conference. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Kothari, V.P.

    1995-10-01

    The overall objective of this conference was to review the latest environmental and waste management technologies being developed under the sponsorship of METC. The focus of this conference was also to address the accomplishments and barriers affecting private sector, and lay the groundwork for future technology development initiatives and opportunities. 26 presentations were presented in: Mixed waste characterization, treatment, and disposal; Contaminant plume containment and remediation; and Decontamination and decommissioning. In addition there were 10 Focus Area presentations, 31 Poster papers covering all Focus Areas, and two panel discussions on: Mixed waste characterization, treatment, and disposal issues; and the Application, evaluation, and acceptance of in-situ and ex-situ plume remediation technologies. Volume 2 contains 16 papers in a poster session and 8 papers in the contaminant plume containment and remediation and landfill stabilization Focus Areas. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  3. Proceedings of the environmental technology through industry partnership conference. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Kothari, V.P.

    1995-10-01

    The overall objective of this conference was to review the latest environmental and waste management technologies being developed under the sponsorship of METC. The focus of this conference was also to address the accomplishments and barriers affecting private sector, and lay the groundwork for future technology development initiatives and opportunities. 26 presentations were presented in: Mixed waste characterization, treatment, and disposal; Contaminant plume containment and remediation; and Decontamination and decommissioning. In addition there were 10 Focus Area presentations, 31 Poster papers covering all Focus Areas, and two panel discussions on: Mixed waste characterization, treatment, and disposal issues; and the application, evaluation, and acceptance of in-situ and ex-situ plume remediation technologies. Volume 1 contains the keynote address, 15 poster papers, 5 papers on mixed waste characterization, treatment, and disposal, and 13 papers on decontamination and decommissioning. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  4. Web 2.0 Technologies and Parent Involvement of ELL Students: An Ecological Perspective

    Science.gov (United States)

    Shin, Dong-shin; Seger, Wendy

    2016-01-01

    This study explores how ELL students' parents participated in a blog-mediated English language arts curriculum in a second grade classroom at a U.S. urban school, and how they supported their children's learning of school-based writing. Adopting ecological perspectives on technological affordances, this study views digital literacy as discursive…

  5. Emerging technologies for biotherapeutic bioanalysis from a high-throughput and multiplexing perspective: insights from an AAPS emerging technology action program committee.

    Science.gov (United States)

    Purushothama, Shobha; Dysinger, Mark; Chen, Yao; Österlund, Karolina; Mora, Johanna; Chunyk, Allison Given; Peloquin, Russ

    2018-02-01

    This manuscript aims to provide insights and updates on emerging technologies from a throughput and multiplexing perspective and to update readers on changes in previously reported technologies. The technologies discussed range from nascent (ultrasensitive Cira, Intellicyt ® , Dynaxi and Captsure™) to the more established (Ella and SQIDlite™). For the nascent technologies, there was an emphasis on user interviews and reviews, where available, to help provide an unbiased view to our readers. For the Ella, a review of published user data as well as author and other user experiences are summarized. Due to their emergent nature, all the technologies described are applicable in the early drug development stage, may require an upfront investment of capital and may not perform as expected.

  6. Palliative home-based technology from a practitioner's perspective: benefits and disadvantages

    OpenAIRE

    Johnston, Bridget

    2014-01-01

    Bridget M Johnston Sue Ryder Care Centre for the Study of Supportive, Palliative, and End of Life Care, School of Health Sciences, University of Nottingham, Queen's Medical Centre, Nottingham, UK Abstract: This critical review paper explores the concept of palliative home-based technology from a practitioner's perspective. The aim of the critical review was to scope information available from published and unpublished research on the current state of palliative home-based tec...

  7. 10. National Nuclear Science and Technology Congress Proceedings Book, Volume 2

    International Nuclear Information System (INIS)

    2009-01-01

    X. National Nuclear Science and Technologies Congress was held on 6-9 October 2009 in Mugla, Turkey in the course of collaborative organization undertaken by Turkish Atomic Energy Authority, Mugla University and Sitki Kocman Foundation. This second volume of Proceedings Book contains 91 submitted presentations and 51 of them are full texts on applications of basic nuclear sciences, nuclear energy and safety.

  8. Digital Technologies as Tools of Engagement and Dissent from the Perspective of Nonprofit Sector

    Institute of Scientific and Technical Information of China (English)

    LIN Ziying

    2017-01-01

    The widely spread of the digital technologies, such as laptop and the Internet, have brought out profound changes in the economy as wel as in political and social life and intensified the interactions and communication between the state, civil society, and market. For the time being, it offered opportunities for the nonprofit sector to initiate a brand-new stage. This article aims to explore how the technology connects nonprofit sector to government and civil society and assess the impact of technology in nonprofit sector perspective by taking The Red Cross of Society of China as an example.

  9. Individual plant examination program: Perspectives on reactor safety and plant performance. Parts 2--5: Final report; Volume 2

    International Nuclear Information System (INIS)

    1997-12-01

    This report provides perspectives gained by reviewing 75 Individual Plant Examination (IPE) submittals pertaining to 108 nuclear power plant units. IPEs are probabilistic analyses that estimate the core damage frequency (CDF) and containment performance for accidents initiated by internal events. The US Nuclear Regulatory Commission (NRC) reviewed the IPE submittals with the objective of gaining perspectives in three major areas: (1) improvements made to individual plants as a result of their IPEs and the collective results of the IPE program, (2) plant-specific design and operational features and modeling assumptions that significantly affect the estimates of CDF and containment performance, and (3) strengths and weaknesses of the models and methods used in the IPEs. These perspectives are gained by assessing the core damage and containment performance results, including overall CDF, accident sequences, dominant contributions to component failure and human error, and containment failure modes. Methods, data, boundary conditions, and assumptions used in the IPEs are considered in understanding the differences and similarities observed among the various types of plants. This report is divided into three volumes containing six parts. Part 1 is a summary report of the key perspectives gained in each of the areas identified above, with a discussion of the NRC's overall conclusions and observations. Part 2 discusses key perspectives regarding the impact of the IPE Program on reactor safety. Part 3 discusses perspectives gained from the IPE results regarding CDF, containment performance, and human actions. Part 4 discusses perspectives regarding the IPE models and methods. Part 5 discusses additional IPE perspectives. Part 6 contains Appendices A, B and C which provide the references of the information from the IPEs, updated PRA results, and public comments on draft NUREG-1560 respectively

  10. Individual plant examination program: Perspectives on reactor safety and plant performance. Part 1: Final summary report; Volume 1

    International Nuclear Information System (INIS)

    1997-12-01

    This report provides perspectives gained by reviewing 75 Individual Plant Examination (IPE) submittals pertaining to 108 nuclear power plant units. IPEs are probabilistic analyses that estimate the core damage frequency (CDF) and containment performance for accidents initiated by internal events. The US Nuclear Regulatory Commission (NRC) reviewed the IPE submittals with the objective of gaining perspectives in three major areas: (1) improvements made to individual plants as a result of their IPEs and the collective results of the IPE program, (2) plant-specific design and operational features and modeling assumptions that significantly affect the estimates of CDF and containment performance, and (3) strengths and weaknesses of the models and methods used in the IPEs. These perspectives are gained by assessing the core damage and containment performance results, including overall CDF, accident sequences, dominant contributions to component failure and human error, and containment failure modes. Methods, data, boundary conditions, and assumptions used in the IPEs are considered in understanding the differences and similarities observed among the various types of plants. This report is divided into three volumes containing six parts. Part 1 is a summary report of the key perspectives gained in each of the areas identified above, with a discussion of the NRC's overall conclusions and observations. Part 2 discusses key perspectives regarding the impact of the IPE Program on reactor safety. Part 3 discusses perspectives gained from the IPE results regarding CDF, containment performance, and human actions. Part 4 discusses perspectives regarding the IPE models and methods. Part 5 discusses additional IPE perspectives. Part 6 contains Appendices A, B and C which provide the references of the information from the IPEs, updated PRA results, and public comments on draft NUREG-1560 respectively

  11. Individual plant examination program: Perspectives on reactor safety and plant performance. Parts 2--5: Final report; Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    This report provides perspectives gained by reviewing 75 Individual Plant Examination (IPE) submittals pertaining to 108 nuclear power plant units. IPEs are probabilistic analyses that estimate the core damage frequency (CDF) and containment performance for accidents initiated by internal events. The US Nuclear Regulatory Commission (NRC) reviewed the IPE submittals with the objective of gaining perspectives in three major areas: (1) improvements made to individual plants as a result of their IPEs and the collective results of the IPE program, (2) plant-specific design and operational features and modeling assumptions that significantly affect the estimates of CDF and containment performance, and (3) strengths and weaknesses of the models and methods used in the IPEs. These perspectives are gained by assessing the core damage and containment performance results, including overall CDF, accident sequences, dominant contributions to component failure and human error, and containment failure modes. Methods, data, boundary conditions, and assumptions used in the IPEs are considered in understanding the differences and similarities observed among the various types of plants. This report is divided into three volumes containing six parts. Part 1 is a summary report of the key perspectives gained in each of the areas identified above, with a discussion of the NRC`s overall conclusions and observations. Part 2 discusses key perspectives regarding the impact of the IPE Program on reactor safety. Part 3 discusses perspectives gained from the IPE results regarding CDF, containment performance, and human actions. Part 4 discusses perspectives regarding the IPE models and methods. Part 5 discusses additional IPE perspectives. Part 6 contains Appendices A, B and C which provide the references of the information from the IPEs, updated PRA results, and public comments on draft NUREG-1560 respectively.

  12. A survey of stakeholder perspectives on exoskeleton technology.

    Science.gov (United States)

    Wolff, Jamie; Parker, Claire; Borisoff, Jaimie; Mortenson, W Ben; Mattie, Johanne

    2014-12-19

    Exoskeleton technology has potential benefits for wheelchair users' health and mobility. However, there are practical barriers to their everyday use as a mobility device. To further understand potential exoskeleton use, and facilitate the development of new technologies, a study was undertaken to explore perspectives of wheelchair users and healthcare professionals on reasons for use of exoskeleton technology, and the importance of a variety of device characteristics. An online survey with quantitative and qualitative components was conducted with wheelchair users and healthcare professionals working directly with individuals with mobility impairments. Respondents rated whether they would use or recommend an exoskeleton for four potential reasons. Seventeen design features were rated and compared in terms of their importance. An exploratory factor analysis was conducted to categorize the 17 design features into meaningful groupings. Content analysis was used to identify themes for the open ended questions regarding reasons for use of an exoskeleton. 481 survey responses were analyzed, 354 from wheelchair users and 127 from healthcare professionals. The most highly rated reason for potential use or recommendation of an exoskeleton was health benefits. Of the design features, 4 had a median rating of very important: minimization of falls risk, comfort, putting on/taking off the device, and purchase cost. Factor analysis identified two main categories of design features: Functional Activities and Technology Characteristics. Qualitative findings indicated that health and physical benefits, use for activity and access reasons, and psychosocial benefits were important considerations in whether to use or recommend an exoskeleton. This study emphasizes the importance of developing future exoskeletons that are comfortable, affordable, minimize fall risk, and enable functional activities. Findings from this study can be utilized to inform the priorities for future

  13. The Adoption and Effects of International Telecommunication Trends in South Africa: Technology and Market Perspectives

    CSIR Research Space (South Africa)

    Evert, GP

    2014-07-01

    Full Text Available The evolution of the telecommunication industry, from both technology and market perspectives, is increasing at a rapid rate. At the forefront of this evolution are the telecommunication standards organisations and vendors. However, the evolution...

  14. Design definition study of a lift/cruise fan technology V/STOL aircraft. Volume 2: Technology aircraft

    Science.gov (United States)

    1975-01-01

    Technology flight vehicles were defined for three different approaches which demonstrate the concept and characteristics of the multipurpose aircraft established for Navy missions. The propulsion system used for the various technology flight vehicles was representative of that established for the multipurpose aircraft. Existing J97-GE100 gas generators were selected based on cost, availability and exhaust characteristics. The LF459 fans were also selected and are compatible with both technology and operational vehicles. To comply with the design guideline safety criteria, it was determined that three gas generators were required to provide engine out safety in the hover flight mode. The final propulsion system established for the technology aircraft was three existing J97 gas generators powering three LF459 fans. Different aircraft candidates were evaluated for application to the three designated design approaches. Each configuration was evaluated on the basis of (1) propulsion system integration, (2) modification required, (3) pilot's visibility, (4) payload volume, and (5) adaptability to compatible location of center-of-gravity/aerodynamic center and thrust center.

  15. Definition of technology development missions for early Space Station satellite servicing. Volume 2: Technical

    Science.gov (United States)

    Cable, D. A.; Diewald, C. A.; Hills, T. C.; Parmentier, T. J.; Spencer, R. A.; Stone, G. E.

    1984-01-01

    Volume 2 contains the Technical Report of the approach and results of the Phase 2 study. The phase 2 servicing study was initiated in June 1983, and is being reported in this document. The scope of the contract was to: (1) define in detail five selected technology development missions (TDM); (2) conduct a design requirement analysis to refine definitions of satellite servicing requirements at the space station; and (3) develop a technology plan that would identify and schedule prerequisite precursor technology development, associated. STS flight experiments and space station experiments needed to provide onorbit validation of the evolving technology.

  16. Strategic relevance and accountability expectations: new perspectives for health care information technology design.

    Science.gov (United States)

    Tan, J K; Modrow, R E

    1999-05-01

    In this article, we discuss the traditional systems analysis perspective on end-user information requirements analysis and extend it to merge with the new accountability expectations perspective to guide the future planning and design of health organization information systems. Underlying the strategic relevance of health care information technology (HCIT) are three critical questions: (1) What is the ideal HCIT model for the health organization in terms of achieving strategic expertise and competitive advantage? Specifically, how does this model link industry performance standards with organizational performance and accountability expectations? (2) How should the limitations of past HCIT models be reconciled to the benefits presented by the superior arrangement of the ideal model in the context of changing accountability expectations? (3) How should alternative HCIT solutions be evaluated in light of evidence-based accountability and organizational performance benchmarking? Insights into these questions will ensure that health care managers, HCIT practitioners and researchers can continue to focus on the most critical issues in harnessing today's fast-paced changing technologies for evolving strategically relevant, performance-based health organization systems.

  17. The effect of future time perspective on delay discounting is mediated by the gray matter volume of vmPFC.

    Science.gov (United States)

    Guo, Yiqun; Chen, Zhiyi; Feng, Tingyong

    2017-07-28

    Although several previous studies have shown that individuals' attitude towards time could affect their intertemporal preference, little is known about the neural basis of the relation between time perspective (TP) and delay discounting. In the present study, we quantified the gray matter (GM) cortical volume using voxel-based morphometry (VBM) methods to investigate the effect of TP on delay discounting (DD) across two independent samples. For group 1 (102 healthy college students; 46 male; 20.40 ± 1.87 years), behavioral results showed that only Future TP was a significant predictor of DD, and higher scores on Future TP were related to lower discounting rates. Whole-brain analysis revealed that steeper discounting correlated with greater GM volume in the ventromedial prefrontal cortex (vmPFC) and ventral part of posterior cingulate cortex (vPCC). Also, GM volume of a cluster in the vmPFC was correlated with Future TP. Interestingly, there was an overlapping region in vmPFC that was correlated with both DD and Future TP. Region-of-interest analysis further indicated that the overlapping region of vmPFC played a partially mediating role in the relation between Future TP and DD in the other independent dataset (Group 2, 36 healthy college students; 14 male; 20.18±1.80 years). Taken together, our results provide a new perspective from neural basis for explaining the relation between DD and future TP. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. US long distance fiber optic networks: Technology, evolution and advanced concepts. Volume 3: Advanced networks and economics

    Science.gov (United States)

    1986-10-01

    This study projects until 2000 the evolution of long distance fiber optic networks in the U.S. Volume 1 is the executive Summary. Volume 2 focuses on fiber optic components and systems that are directly related to the operation of long-haul networks. Optimistic, pessimistic and most likely scenarios of technology development are presented. The activities of national and regional companies implementing fiber long haul networks are also highlighted, along with an analysis of the market and regulatory forces affecting network evolution. Volume 3 presents advanced fiber optic network concept definitions. Inter-LATA traffic is quantified and forms the basis for the construction of 11-, 15-, 17-, and 23-node networks. Using the technology projections from Volume 2, a financial model identifies cost drivers and determines circuit mile costs between any two LATAs. A comparison of fiber optics with alternative transmission concludes the report.

  19. Oil and gas technology transfer activities and potential in eight major producing states. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    In 1990, the Interstate Oil and Gas Compact Commission (the Compact) performed a study that identified the structure and deficiencies of the system by which oil and gas producers receive information about the potential of new technologies and communicate their problems and technology needs back to the research community. The conclusions of that work were that major integrated companies have significantly more and better sources of technology information than independent producers. The majors also have significantly better mechanisms for communicating problems to the research and development (R&D) community. As a consequence, the Compact recommended analyzing potential mechanisms to improve technology transfer channels for independents and to accelerate independents acceptance and use of existing and emerging technologies. Building on this work, the Compact, with a grant from the US Department Energy, has reviewed specific technology transfer organizations in each of eight major oil producing states to identify specific R&D and technology transfer organizations, characterize their existing activities, and identify potential future activities that could be performed to enhance technology transfer to oil and gas producers. The profiles were developed based on information received from organizations,follow-up interviews, site visit and conversations, and participation in their sponsored technology transfer activities. The results of this effort are reported in this volume. In addition, the Compact has also developed a framework for the development of evaluation methodologies to determine the effectiveness of technology transfer programs in performing their intended functions and in achieving desired impacts impacts in the producing community. The results of that work are provided in a separate volume.

  20. Research on the Synergy Degree of China Yangtze River Delta Region Technology Innovation System Evolution from the Perspective of Technology Innovation Chain

    Directory of Open Access Journals (Sweden)

    Xu Bin Feng

    2014-08-01

    Full Text Available Abstract: This paper divides technology innovation system into research and development input subsystem, technology research and development subsystem and technology application subsystem from the perspective of technology innovation chain, combining with the system theory. Then selects the corresponding ordinal variables, makes an empirical analysis to the synergy degree of Yangtze River delta regional technology innovation system evolution by complex system synergy degree model which based on the data of 2002-2009. The results show that the development of synergy degree of the technology innovation system appears a rising trend and the technology application subsystem is the key factor of direction and degree of synergy development in the evolution process of regional technology innovation system in the Yangtze River Delta of China. Finally, this paper analyzes the characteristics and causes of synergy degree’s evolution, and puts forward the corresponding policy recommendations to different problems.

  1. Consuming technologies - developing routines

    DEFF Research Database (Denmark)

    Gram-Hanssen, Kirsten

    2008-01-01

    technologies and in this article these processes will be investigated from three different perspectives: an historical perspective of how new technologies have entered homes, a consumer perspective of how both houses and new technologies are purchased and finally, as the primary part of the article, a user...... perspective of how routines develop while these technologies are being used. In the conclusion these insights are discussed in relation to possible ways of influencing routines....

  2. Wobbled splatting-a fast perspective volume rendering method for simulation of x-ray images from CT

    International Nuclear Information System (INIS)

    Birkfellner, Wolfgang; Seemann, Rudolf; Figl, Michael; Hummel, Johann; Ede, Christopher; Homolka, Peter; Yang Xinhui; Niederer, Peter; Bergmann, Helmar

    2005-01-01

    3D/2D registration, the automatic assignment of a global rigid-body transformation matching the coordinate systems of patient and preoperative volume scan using projection images, is an important topic in image-guided therapy and radiation oncology. A crucial part of most 3D/2D registration algorithms is the fast computation of digitally rendered radiographs (DRRs) to be compared iteratively to radiographs or portal images. Since registration is an iterative process, fast generation of DRRs-which are perspective summed voxel renderings-is desired. In this note, we present a simple and rapid method for generation of DRRs based on splat rendering. As opposed to conventional splatting, antialiasing of the resulting images is not achieved by means of computing a discrete point spread function (a so-called footprint), but by stochastic distortion of either the voxel positions in the volume scan or by the simulation of a focal spot of the x-ray tube with non-zero diameter. Our method generates slightly blurred DRRs suitable for registration purposes at framerates of approximately 10 Hz when rendering volume images with a size of 30 MB. (note)

  3. 10. National Nuclear Science and Technologies Congress Proceedings Full Texts Volume 1

    International Nuclear Information System (INIS)

    2009-01-01

    X. National Nuclear Science and Technologies Congress was held on 6-9 October 2009 in Mugla, Turkey in the course of collaborative organization undertaken by Turkish Atomic Energy Authority, Mugla University and Sitki Kocman Foundation. This first volume of Proceedings Book contains 75 submitted presentations and 36 of them are full texts on applications of nuclear techniques.

  4. Electric and Magnetic Fields (EMF) RAPID Program Engineering Project 8: FINAL REPORT, Evaluation of Field Reduction Technologies, Volume 1 (Report) and Volume 2 (Appendices)

    Energy Technology Data Exchange (ETDEWEB)

    Commonwealth Associates, Inc.; IIT Research Institute

    1997-08-01

    This draft report consists of two volumes. Volume 1, the main body, contains an introducto~ sectionj an overview of magnetic fields sectio~ and field reduction technology evaluation section. Magnetic field reduction methods are evalpated for transmission lines, distribution Iines,sulxtations, building wiring applkmd machinery, and transportation systems. The evaluation considers effectiveness, co% and other ftiors. Volume 2 contains five appendices, Append~ A presents magnetic field shielding information. Appendices B and C present design assumptions and magnetic field plots for transmission and distribution lines, respectively. Appendices D and E present cost estimate details for transmission and distribution limes, respectively.

  5. A perspective on the comparison of risks from different technologies

    International Nuclear Information System (INIS)

    Kastenberg, W.E.; Griesmeyer, J.M.; Johnson, D.H.

    1982-01-01

    Comparisons between the risks of various technologies have been used in evaluating different technologies which produce particular benefits, in developing perspectives on the acceptability of risks, and in developing suitable priorities for risk reductions. Although difficult and controversial these comparisons will continue to be used in design, in regulation and in the socio-political process. In this paper, some of the problems that arise in the comparison of risk are discussed. These include the choice of the proper range of impacts to be addressed in the risk assessments, the difficulty of ensuring completeness in the treatment of the impacts that are addressed, and uncertainties that arise from modeling and from the scarcity of data and its interpretation. In addition, the disparate manner in which the various risks are manifested (types, magnitude and distribution of consequences as well as frequency) makes the comparison of the risks controversial

  6. Technology and manufacturing process selection the product life cycle perspective

    CERN Document Server

    Pecas, Paulo; Silva, Arlindo

    2014-01-01

    This book provides specific topics intending to contribute to an improved knowledge on Technology Evaluation and Selection in a Life Cycle Perspectives. Although each chapter will present possible approaches and solutions, there are no recipes for success. Each reader will find his/her balance in applying the different topics to his/her own specific situation. Case studies presented throughout will help in deciding what fits best to each situation, but most of all any ultimate success will come out of the interplay between the available solutions and the specific problem or opportunity the reader is faced with.

  7. Innovation, Technology and Decision Making: A Perspective for Strategic Action in Firms

    Science.gov (United States)

    Mulenburg, Gerald M.

    2002-01-01

    Innovation, technology, and the making of decisions are tightly intertwined in what can generally be called, strategic decision making. Although true for all firms, it is especially true in innovative, high technology firms that operate in a turbulent, fast moving environment where strategic decisions must be made accurately and quickly to survive. This paper looks at some factors reported in the literature that affect how and why the strategic decision process is so important, especially in companies in fast-moving, competitive environments. The work of several prominent authors who looked critically at past theory and research, and the current state of knowledge and practice, provides a perspective of how firms make strategic decisions.

  8. Fluid Vessel Quantity using Non-Invasive PZT Technology Flight Volume Measurements Under Zero G Analysis

    Science.gov (United States)

    Garofalo, Anthony A.

    2013-01-01

    The purpose of the project is to perform analysis of data using the Systems Engineering Educational Discovery (SEED) program data from 2011 and 2012 Fluid Vessel Quantity using Non-Invasive PZT Technology flight volume measurements under Zero G conditions (parabolic Plane flight data). Also experimental planning and lab work for future sub-orbital experiments to use the NASA PZT technology for fluid volume measurement. Along with conducting data analysis of flight data, I also did a variety of other tasks. I provided the lab with detailed technical drawings, experimented with 3d printers, made changes to the liquid nitrogen skid schematics, and learned how to weld. I also programmed microcontrollers to interact with various sensors and helped with other things going on around the lab.

  9. Shared Values and Socio-Cultural Norms: E-Learning Technologies from a Social Practice Perspective

    Science.gov (United States)

    Shih, Patti; Velan, Gary M.; Shulruf, Boaz

    2017-01-01

    From a perspective of social practice, learning is a socially constituted practice that is imbued with socio-culturally significant meanings and shaped by the values and norms shared within a community of learners. This focus group study examines the role of e-learning technologies in mediating the social practice of learning among coursework…

  10. A technological contingency perspective on the dept and scope of international outsourcing

    OpenAIRE

    Mol, M.J.; PAUWELS, Pieter; MATTHYSSENS, Paul

    2006-01-01

    In this study we present and test a technological contingency perspective on two dimensions of international outsourcing: depth and scope. The depth of international outsourcing refers to the ratio of foreign to total outsourcing. The scope of international outsourcing refers to the ratio of foreign to total outsourcing. The scope of international outsourcing captures the degree of psychic dispersion between the country of operations and the countries a firm is outsourcing to. Using multiple...

  11. Advancing automation and robotics technology for the Space Station and for the US economy, volume 2

    Science.gov (United States)

    1985-01-01

    In response to Public Law 98-371, dated July 18, 1984, the NASA Advanced Technology Advisory Committee has studied automation and robotics for use in the Space Station. The Technical Report, Volume 2, provides background information on automation and robotics technologies and their potential and documents: the relevant aspects of Space Station design; representative examples of automation and robotics; applications; the state of the technology and advances needed; and considerations for technology transfer to U.S. industry and for space commercialization.

  12. Third international spent fuel storage technology symposium/workshop: proceedings. Volume 2

    International Nuclear Information System (INIS)

    1986-01-01

    The scope of this meeting comprised dry storage and rod consolidation, emphasizing programs on water reactor fuel with zirconium alloy cladding. Volume 2 contains the papers from the poster session and workshops that were conducted during the meeting. There were 18 poster presentations. Four workshops were held: Fuel Integrity; Storage System Modeling and Analysis; Rod Consolidation Technology; and System Integration and Optimization. Individual papers were processed for inclusion in the Energy Data Base

  13. Third international spent fuel stroage technology symposium/workshop: proceedings. Volume 1

    International Nuclear Information System (INIS)

    1986-01-01

    The scope of this meeting comprised dry storage and rod consolidation, emphasizing programs on water reactor fuel with zirconium alloy cladding. Volume 1 contains the symposium papers, together with the question/answer sessions that followed the presentations. Four sessions were held: Dry Storage System Tests, Demonstrations and Analyses; At-Reactor and Central Storage Facilities; Dry Storage Integrity; and Rod Consolidation Technology and Demonstrations. Individual papers were processed for inclusion in the Energy Data Base

  14. Religious Architecture : Anthropological Perspectives

    OpenAIRE

    2013-01-01

    Religious Architecture: Anthropological Perspectives develops an anthropological perspective on modern religious architecture, including mosques, churches and synagogues. Borrowing from a range of theoretical perspectives on space-making and material religion, this volume looks at how religious buildings take their place in opposition to the secular surroundings, how they, as evocations of the sublime, help believers to move beyond the boundaries of modern subjectivity, and how they, in their...

  15. Diversity and Inclusion in Information Technology from an Age Perspective: Motivating and Managing Information Technology Professionals across Multiple Generations in the Workforce

    Science.gov (United States)

    Kenan-Smalls, Yottie Marie

    2011-01-01

    The purpose of this quantitative study was to investigate diversity and inclusion from an age perspective among information technology (IT) professionals that were categorized as 4 different generations in the workforce today: Traditionalists, Baby Boomers, Generation X, and Generation Y. At the same time, this study sought to examine motivational…

  16. Support technologies to cater for rockbursts and falls of ground in the immediate face area, volume 1.

    CSIR Research Space (South Africa)

    Daehnk, A

    2000-03-01

    Full Text Available Final Project Report Support technologies to cater for rockbursts and falls of ground in the immediate face area Volume I A. Daehnke, E. Acheampong, N. Reddy, K.B. Le Bron and A.T. Haile Research agency: CSIR Mining Technology Project number: GAP...

  17. 5. annual clean coal technology conference: powering the next millennium. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The Fifth Annual Clean Coal Technology Conference focuses on presenting strategies and approaches that will enable clean coal technologies to resolve the competing, interrelated demands for power, economic viability, and environmental constraints associated with the use of coal in the post-2000 era. The program addresses the dynamic changes that will result from utility competition and industry restructuring, and to the evolution of markets abroad. Current projections for electricity highlight the preferential role that electric power will have in accomplishing the long-range goals of most nations. Increase demands can be met by utilizing coal in technologies that achieve environmental goals while keeping the cost- per-unit of energy competitive. Results from projects in the DOE Clean Coal Technology Demonstration Program confirm that technology is the pathway to achieving these goals. The industry/government partnership, cemented over the past 10 years, is focused on moving the clean coal technologies into the domestic and international marketplaces. The Fifth Annual Clean Coal Technology Conference provides a forum to discuss these benchmark issues and the essential role and need for these technologies in the post-2000 era. This volume contains technical papers on: advanced coal process systems; advanced industrial systems; advanced cleanup systems; and advanced power generation systems. In addition, there are poster session abstracts. Selected papers from this proceedings have been processed for inclusion in the Energy Science and Technology database.

  18. Fifth DOE symposium on enhanced oil and gas recovery and improved drilling technology. Volume 2. Oil

    Energy Technology Data Exchange (ETDEWEB)

    Linville, B. [ed.

    1979-01-01

    Volume 2 contains papers from the following sessions: residual oil determination; thermal methods; heavy oil-tar sands; technology transfer; and carbon dioxide flooding. Individual papers were processed.

  19. Advances for prosthetic technology from historical perspective to current status to future application

    CERN Document Server

    LeMoyne, Robert

    2016-01-01

    This book focuses on the advances in transtibial prosthetic technology and targets research in the evolution of the powered prosthesis such as the BiOM, which was derived from considerable research and development at the Massachusetts Institute of Technology. The concept of the book spans the historical evolution of prosthetic applications from passive to new and futuristic robotic prosthetic technologies.  The author describes the reasons for amputation, surgical procedures, and an historical perspective of the prosthesis for the lower limb. He also addresses the phases and sub-phases of gait and compensatory mechanisms arising for a transtibial prosthesis and links the compensatory mechanisms to long-term morbidities.  The general technologies for gait analysis central to prosthetic design and the inherent biomechanics foundations for analysis are also explored.  The book reports on recent-past to current-term applications with passive elastic prostheses.  The core of the book deals with futuristic robo...

  20. A future perspective on technological obsolescenceat NASA, Langley Research Center

    Science.gov (United States)

    Mcintyre, Robert M.

    1990-01-01

    The present research effort was the first phase of a study to forecast whether technological obsolescence will be a problem for the engineers, scientists, and technicians at NASA Langley Research Center (LaRC). There were four goals of the research: to review the literature on technological obsolescence; to determine through interviews of division chiefs and branch heads Langley's perspective on future technological obsolescence; to begin making contacts with outside industries to find out how they view the possibility of technological obsolescence; and to make preliminary recommendations for dealing with the problem. A complete description of the findings of this research can be reviewed in a technical report in preparation. The following are a small subset of the key findings of the study: NASA's centers and divisions vary in their missions and because of this, in their capability to control obsolescence; research-oriented organizations within NASA are believed by respondents to keep up to date more than the project-oriented organizations; asked what are the signs of a professional's technological obsolescence, respondents had a variety of responses; top performing scientists were viewed as continuous learners, keeping up to date by a variety of means; when asked what incentives were available to aerospace technologists for keeping up to data, respondents specified a number of ideas; respondents identified many obstacles to professionals' keeping up to date in the future; and most respondents expressed some concern for the future of the professionals at NASA vis a vis the issue of professional obsolescence.

  1. Handbook of public communication of science and technology

    CERN Document Server

    Trench, Brian

    2008-01-01

    Comprehensive yet accessible, this key handbook provides an up-to-date overview of the fast growing and increasingly important area of 'public communication of science and technology', from both research and practical perspectives. As well as introducing the main issues, arenas and professional perspectives involved, it presents the findings of earlier research and the conclusions previously drawn. Unlike most existing books on this topic, this unique volume couples an overview of the practical problems faced by practitioners with a thorough review of relevant literature and research. The practical handbook format ensures it is a student-friendly resource, but its breadth of scope and impressive contributors means that it is also ideal for practitioners and professionals working in the field. Combining the contributions of different disciplines (media and journalism studies, sociology and history of science), the perspectives of different geographical and cultural contexts, and by selecting key contributions ...

  2. Radioactive waste package assay facility. Volume 1. Application of assay technology

    International Nuclear Information System (INIS)

    Findlay, D.J.S.; Green, T.H.; Molesworth, T.V.; Staniforth, D.; Strachan, N.R.; Rogers, J.D.; Wise, M.O.; Forrest, K.R.

    1992-01-01

    This report, in three volumes, covers the work carried out by Taylor Woodrow Construction Ltd., and two major sub-contractors: Harwell Laboratory (AEA Technology) and Siemens Plessey Controls Ltd., on the development of a radioactive waste package assay facility, for cemented 500 litre intermediate level waste drums. In volume 1, the reasons for assay are considered together with the various techniques that can be used, and the information that can be obtained. The practical problems associated with the use of the various techniques in an integrated assay facility are identified, and the key parameters defined. Engineering and operational features are examined and provisional designs proposed for facilities at three throughput levels: 15,000, 750 and 30 drums per year respectively. The capital and operating costs for such facilities have been estimated. A number of recommendations are made for further work. 16 refs., 14 figs., 13 tabs

  3. Radiotherapy of brain metastases of a breast cancer: present strategies, technological innovations and biological perspectives

    International Nuclear Information System (INIS)

    Chargari, C.; Vedrine, L.; Bauduceau, O.; Jacob, J.; Fayolle, M.; Chargari, C.; Campana, F.; Pierga, J.Y.; Idrissi, H.R.; Fourquet, A.; Kirova, Y.

    2010-01-01

    The authors propose an overview of strategies which are presently used for the treatment of brain metastases related to a breast cancer. They outline the perspectives and recent developments of encephalic irradiation with new technologies allowing an increased conformation to be obtained, and also in terms of radiosensitization and radioprotection experiences. Short communication

  4. Technology of Polish copper ore beneficiation – perspectives from the past experience

    Directory of Open Access Journals (Sweden)

    Wieniewski Andrzej

    2016-01-01

    Full Text Available The paper describes the main types of existing copper deposits in the world and the most common enrichment technologies. The characteristic elements of the current flowsheet of the Polish ore beneficiation were discussed together with the reasons for using them. The paper presents a perspective flowsheet based on more than 50-years of experience in beneficiation of Polish copper ore. The main elements of proposed technology are: leaving in justified cases the division of ore into fractions of increased sandstone and carbonate ores content, flotation in the milling circuit as part of the effective preparation of the ore to rougher flotation, intensive rougher flotation, classic cleaning system, processing of the middlings with grinding system in new type mills, classification and flotation with outlet of final tailings.

  5. A Survey of Rural Hospitals’ Perspectives on Health Information Technology Outsourcing

    Science.gov (United States)

    Johnson, Nicholas; Murphy, Alison; McNeese, Nathan; Reddy, Madhu; Purao, Sandeep

    2013-01-01

    A survey of rural hospitals was conducted in the spring of 2012 to better understand their perspectives on health information technology (HIT) outsourcing and the role that hospital-to-hospital HIT partnerships (HHPs) can play as an outsourcing mechanism. The survey sought to understand how HHPs might be leveraged for HIT implementation, as well as the challenges with forming them. The results suggest that HHPs have the potential to address rural hospitals’ slow rate of HIT adoption, but there are also challenges to creating these partnerships. These issues, as well as avenues for further research, are then discussed. PMID:24551373

  6. A survey of rural hospitals' perspectives on health information technology outsourcing.

    Science.gov (United States)

    Johnson, Nicholas; Murphy, Alison; McNeese, Nathan; Reddy, Madhu; Purao, Sandeep

    2013-01-01

    A survey of rural hospitals was conducted in the spring of 2012 to better understand their perspectives on health information technology (HIT) outsourcing and the role that hospital-to-hospital HIT partnerships (HHPs) can play as an outsourcing mechanism. The survey sought to understand how HHPs might be leveraged for HIT implementation, as well as the challenges with forming them. The results suggest that HHPs have the potential to address rural hospitals' slow rate of HIT adoption, but there are also challenges to creating these partnerships. These issues, as well as avenues for further research, are then discussed.

  7. Environmental Impacts of Renewable Electricity Generation Technologies: A Life Cycle Perspective

    Energy Technology Data Exchange (ETDEWEB)

    Heath, Garvin

    2016-01-13

    All energy systems impact the environment. Much has been learned about these environmental impacts from decades of research. Through systematic reviews, meta-analysis and original research, the National Renewable Energy Laboratory has been building knowledge about environmental impacts of both renewable and conventional electricity generation technologies. Evidence for greenhouse gas emissions, water and land use will be reviewed mostly from the perspective of life cycle assessment. Impacts from oil and natural gas systems will be highlighted. Areas of uncertainty and challenge will be discussed as suggestions for future research, as well as career opportunities in this field.

  8. Health Monitoring System Technology Assessments: Cost Benefits Analysis

    Science.gov (United States)

    Kent, Renee M.; Murphy, Dennis A.

    2000-01-01

    The subject of sensor-based structural health monitoring is very diverse and encompasses a wide range of activities including initiatives and innovations involving the development of advanced sensor, signal processing, data analysis, and actuation and control technologies. In addition, it embraces the consideration of the availability of low-cost, high-quality contributing technologies, computational utilities, and hardware and software resources that enable the operational realization of robust health monitoring technologies. This report presents a detailed analysis of the cost benefit and other logistics and operational considerations associated with the implementation and utilization of sensor-based technologies for use in aerospace structure health monitoring. The scope of this volume is to assess the economic impact, from an end-user perspective, implementation health monitoring technologies on three structures. It specifically focuses on evaluating the impact on maintaining and supporting these structures with and without health monitoring capability.

  9. Low-level radioactive waste from commercial nuclear reactors. Volume 2. Treatment, storage, disposal, and transportation technologies and constraints

    Energy Technology Data Exchange (ETDEWEB)

    Jolley, R.L.; Dole, L.R.; Godbee, H.W.; Kibbey, A.H.; Oyen, L.C.; Robinson, S.M.; Rodgers, B.R.; Tucker, R.F. Jr.

    1986-05-01

    The overall task of this program was to provide an assessment of currently available technology for treating commercial low-level radioactive waste (LLRW), to initiate development of a methodology for choosing one technology for a given application, and to identify research needed to improve current treatment techniques and decision methodology. The resulting report is issued in four volumes. Volume 2 discusses the definition, forms, and sources of LLRW; regulatory constraints affecting treatment, storage, transportation, and disposal; current technologies used for treatment, packaging, storage, transportation, and disposal; and the development of a matrix relating treatment technology to the LLRW stream as an aid for choosing methods for treating the waste. Detailed discussions are presented for most LLRW treatment methods, such as aqueous processes (e.g., filtration, ion exchange); dewatering (e.g., evaporation, centrifugation); sorting/segregation; mechanical treatment (e.g., shredding, baling, compaction); thermal processes (e.g., incineration, vitrification); solidification (e.g., cement, asphalt); and biological treatment.

  10. Low-level radioactive waste from commercial nuclear reactors. Volume 2. Treatment, storage, disposal, and transportation technologies and constraints

    International Nuclear Information System (INIS)

    Jolley, R.L.; Dole, L.R.; Godbee, H.W.; Kibbey, A.H.; Oyen, L.C.; Robinson, S.M.; Rodgers, B.R.; Tucker, R.F. Jr.

    1986-05-01

    The overall task of this program was to provide an assessment of currently available technology for treating commercial low-level radioactive waste (LLRW), to initiate development of a methodology for choosing one technology for a given application, and to identify research needed to improve current treatment techniques and decision methodology. The resulting report is issued in four volumes. Volume 2 discusses the definition, forms, and sources of LLRW; regulatory constraints affecting treatment, storage, transportation, and disposal; current technologies used for treatment, packaging, storage, transportation, and disposal; and the development of a matrix relating treatment technology to the LLRW stream as an aid for choosing methods for treating the waste. Detailed discussions are presented for most LLRW treatment methods, such as aqueous processes (e.g., filtration, ion exchange); dewatering (e.g., evaporation, centrifugation); sorting/segregation; mechanical treatment (e.g., shredding, baling, compaction); thermal processes (e.g., incineration, vitrification); solidification (e.g., cement, asphalt); and biological treatment

  11. Influences of reverse outsourcing on green technological progress from the perspective of a global supply chain.

    Science.gov (United States)

    Wang, Shuhong; Song, Malin

    2017-10-01

    As a newly appeared trade mode in recent years, reverse outsourcing has made a great impact on traditional trade modes. This paper researched the influences of reverse outsourcing on green technological progress from the perspective of a global supply chain by using micro-data of enterprises. It worked out the rate of green technological progress from two innovative concepts: potential production technology and practical production technology. The empirical analysis results indicated that reverse outsourcing stimulates, and enterprise size and ownership type potentially affects, green technological progress. State-owned or foreign enterprises with high income levels would pay more attention to environmental protection, energy saving, and emission reduction, while small and micro enterprises with low incomes would choose to ignore environmental protection. Copyright © 2017 Elsevier B.V. All rights reserved.

  12. Presenting a Framework for Evaluating and Prioritizing Risk of Information Technology Outsourcing: Perspective of Experts in Information Systems Design

    Directory of Open Access Journals (Sweden)

    abbas Keramati

    2012-06-01

    Full Text Available Information technology outsourcing projects have advantages including: reduced costs, improved service quality, creation of competitive advantage, etc. When these projects are being outsourced, lack of attention to their risks causes the lost of anticipated benefits and contributes to failure. As for the growing trend of information technology outsourcing projects in Iran, the purpose of this study is to identify the risks of information technology outsourcing projects, evaluate and prioritize them based on the perspective of experts in information systems design. For achieving these goals, key articles were reviewed and comprehensive list of 12 risk factors were identified. For prioritizing, a Fuzzy Analytical Network Process (F-ANP structure has been provided and the risk factors were laid in it. Then, by using a questionnaire, 13 experts' viewpoints were collected. The results show that the factor of "supplier" and the sub-factor of "Lack of skills of supplier in IT operations" are the most important factors for success and failure of information technology outsourcing projects in the perspective of experts in information systems design.

  13. Perspectives on the future of nuclear power

    International Nuclear Information System (INIS)

    Chernoff, H.; Friedman, D.

    1990-01-01

    The US outlook on the future of nuclear power can be divided into three perspectives, here termed the macroeconomic perspective, the technological perspective, and the utility perspective (including independent power producers, or IPPs). A brief review of the macroeconomic and technological perspectives shows how differently the public, the media, politicians, and many nonutility advocates of nuclear power view the future of nuclear power (and, especially, the requirements for new orders) compared with the utilities and prospective IPPs

  14. Mini-guts in a dish: Perspectives of adult Cystic Fibrosis (CF) patients and parents of young CF patients on organoid technology.

    Science.gov (United States)

    Boers, Sarah N; de Winter-de Groot, Karin M; Noordhoek, Jacquelien; Gulmans, Vincent; van der Ent, Cornelis K; van Delden, Johannes J M; Bredenoord, Annelien L

    2018-03-06

    Organoid technology enables the cultivation of human tissues in a dish. Its precision medicine potential could revolutionize the Cystic Fibrosis (CF) field. We provide a first thematic exploration of the patient perspective on organoid technology to set the further research agenda, which is necessary for responsible development of this ethically challenging technology. 23 semi-structured qualitative interviews with 14 Dutch adult CF patients and 12 parents of young CF patients to examine their experiences, opinions, and attitudes regarding organoid technology. Four themes emerged: (1) Respondents express a close as well as a distant relationship to organoids; (2) the open-endedness of organoid technology sparks hopes and concerns, (3) commercial use evokes cautiousness. (4) Respondents mention the importance of sound consent procedures, long-term patient engagement, responsible stewardship, and stringent conditions for commercial use. The precision medicine potential of organoid technology can only be realized if the patient perspective is taken adequately into account. Copyright © 2018 European Cystic Fibrosis Society. Published by Elsevier B.V. All rights reserved.

  15. DOE Low-Level Waste Management Program perspective on technology transfer: opportunities and challenges

    International Nuclear Information System (INIS)

    Large, D.E.

    1982-01-01

    The Department of Energy's Low-Level Waste Management Program (DOE LLWMP) perspective in regard to transfer of LLWMP technology to current and potential users in both the commercial and defense sectors is discussed. Past, present, and future opportunities and challenges for the whole nuclear waste management are indicated. Elements considered include: historical and evolutionary events and activities; the purpose of the Program and its inherent opportunities and challenges; achievements and expected accomplishments; supporters and interactors; packaging and delivering technology; implementing and serving potential users; determining and meeting users' needs; and identifying and responding to opportunities and challenges. The low-level waste management effort to improve shallow land burial technology began in FY 1977 and has expanded to include waste treatment and alternative disposal methods. Milestones have been established and are used as principal management control items. This technology, the Program Product, is described and is made available. This year, the Program has drafted criteria for inclusion in a DOE order for radioactive waste management operations at DOE sites

  16. Mass Media’s Perspective on the Challenges of Information and Communication Technology (ICT) in Indonesia

    Science.gov (United States)

    Junaidi

    2017-12-01

    This study investigated the challenges of Information and Communication Technology (ICT) in Indonesia based on mass media’s perspective. The challenges of ICT on mass media’s perspective are very complex. Some of these challenges include the consideration of the advantages and disadvantages of ICT, threats to the unity of the country, cultural problems, regulation, business competition among operators, Pokemon Go booming, the existence of social media which triggers hostility between people and the increasing rate of the interconnection cost. Among the main reasons to this phenomenon is a need of massive investment to build the infrastructures. This study used Robert N. Entman framing model to analyze the headlines of Majalah ICT (an ICT magazine).

  17. Generation capacity issues in deregulated markets : a Canadian perspective, volume 1

    International Nuclear Information System (INIS)

    Ayres, M.; Brereton, B.; Czamanski, D.; Van Melle, B.; Penman, A.

    2004-01-01

    A study was conducted by the Canadian Energy Research Institute (CERI) to assess generation capacity issues in deregulated electricity markets in Canada. This first volume is based on observations of the restructuring experience in several jurisdictions. It describes how, or if, energy-only markets are succeeding in ensuring capacity additions, and under what conditions. Supply-side and demand-side mechanisms have been proposed as solutions to address these problems. The report focuses on theoretical and practical issues of adequacy that are most relevant from a Canadian perspective. In fully developed energy markets, the price of energy reflects scarcity. Prices are low when generating resources are abundant, and owners make investment decisions based on price expectations. Although deregulated markets may theoretically offer a solution to the capacity adequacy problem, experience has shown that it is not easy to make the rules that make markets operate efficiently. It was concluded that it seems unlikely that deregulated markets in their current state will be able to offer adequate generation for the long term. The challenge lies in moving to competitive markets that encourage long term investment, and adding a capacity mechanism to the market design. refs., tabs., figs

  18. Slope excavation quality assessment and excavated volume calculation in hydraulic projects based on laser scanning technology

    Directory of Open Access Journals (Sweden)

    Chao Hu

    2015-04-01

    Full Text Available Slope excavation is one of the most crucial steps in the construction of a hydraulic project. Excavation project quality assessment and excavated volume calculation are critical in construction management. The positioning of excavation projects using traditional instruments is inefficient and may cause error. To improve the efficiency and precision of calculation and assessment, three-dimensional laser scanning technology was used for slope excavation quality assessment. An efficient data acquisition, processing, and management workflow was presented in this study. Based on the quality control indices, including the average gradient, slope toe elevation, and overbreak and underbreak, cross-sectional quality assessment and holistic quality assessment methods were proposed to assess the slope excavation quality with laser-scanned data. An algorithm was also presented to calculate the excavated volume with laser-scanned data. A field application and a laboratory experiment were carried out to verify the feasibility of these methods for excavation quality assessment and excavated volume calculation. The results show that the quality assessment indices can be obtained rapidly and accurately with design parameters and scanned data, and the results of holistic quality assessment are consistent with those of cross-sectional quality assessment. In addition, the time consumption in excavation quality assessment with the laser scanning technology can be reduced by 70%–90%, as compared with the traditional method. The excavated volume calculated with the scanned data only slightly differs from measured data, demonstrating the applicability of the excavated volume calculation method presented in this study.

  19. Leveraging In-Memory Technology to improve the acceptance of MSS - a managers' Perspective

    OpenAIRE

    Mayer, Jörg H.; Esswein, Markus; Goeken, Matthias; Quick, Reiner

    2014-01-01

    Management support systems (MSS) help managers to perform their jobs more efficiently. With in-memory technology, a new IT enabler promises to support managers by benefits ranging from reducing time for MSS data entry and analysis to complete new topics of analysis. Hence, the present situation is favorable for an MSS redesign applying in-memory apps. Such apps are field-tested and ready-to-use, but from a business perspective they lack impact. Based on findings from a literature review and r...

  20. Proceedings of the national symposium on vacuum science and technology and power beams. Volume 2

    International Nuclear Information System (INIS)

    Venkatramani, N.; Ray, A.K.

    1997-11-01

    This volume contains the proceedings of the national symposium on vacuum science and technology and power beams. The main topics dealt with are: accelerators and vacuum systems, thin films deposition techniques, lasers and electron power beams and their applications in nuclear facilities. Papers relevant to INIS are indexed separately

  1. Remote and continuous gamma spectrometry for environmental radiation protection: state of the art technology and perspectives

    International Nuclear Information System (INIS)

    Van Put, Ph.; Lellis, C.; Debauche, A.; Lacroix, J-P.

    2004-01-01

    The instruments technologies for radiological protection of the environment have been considerably enhanced since the last 20 years. From very simple warning bells in the early 80s, the instruments have been sophisticated nowadays to a degree where their performances can be compared to the performances achieved in low level laboratories. This presentation will briefly overview the evolution of these instruments by comparing their technology, their methodology and their performances. Next, it will present the concepts of the state of the art technology in the field of continuous monitoring of the environment. A discussion will follow on the performances and the limitations of this technology. Finally, the presentation will highlight the future perspective of developments by taking into account recent progress in the field of radiation detectors, telecommunication and computer sciences among others. (authors)

  2. New municipal solid waste processing technology reduces volume and provides beneficial reuse applications for soil improvement and dust control

    Science.gov (United States)

    A garbage-processing technology has been developed that shreds, sterilizes, and separates inorganic and organic components of municipal solid waste. The technology not only greatly reduces waste volume, but the non-composted byproduct of this process, Fluff®, has the potential to be utilized as a s...

  3. Significant others’ perspectives on person-centered information and communication technology in stroke rehabilitation – a grounded theory study

    DEFF Research Database (Denmark)

    Nabsen Marwaa, Mille; Kristensen, Hanne Kaae; Ytterberg, Charlotte

    2017-01-01

    Purpose: The purpose of this study was to explore significant others perspective on how information and communication technology (ICT) may support the rehabilitation process after stroke and enhance life quality during and after rehabilitation. Method: To capture the participants’ experiences, tw...

  4. Cell dispensing in low-volume range with the immediate drop-on-demand technology (I-DOT).

    Science.gov (United States)

    Schober, Lena; Büttner, Evy; Laske, Christopher; Traube, Andrea; Brode, Tobias; Traube, Andreas Florian; Bauernhansl, Thomas

    2015-04-01

    Handling and dosing of cells comprise the most critical step in the microfabrication of cell-based assay systems for screening and toxicity testing. Therefore, the immediate drop-on-demand technology (I-DOT) was developed to provide a flexible noncontact liquid handling system enabling dispensing of cells and liquid without the risk of cross-contamination down to a precise volume in the nanoliter range. Liquid is dispensed from a source plate within nozzles at the bottom by a short compressed air pulse that is given through a quick release valve into the well, thus exceeding the capillary pressure in the nozzle. Droplets of a defined volume can be spotted directly onto microplates or other cell culture devices. We present a study on the performance and biological impact of this technology by applying the cell line MCF-7, human fibroblasts, and human mesenchymal stem cells (hMSCs). For all cell types tested, viability after dispensing is comparable to the control and exhibits similar proliferation rates in the absence of apoptotic cells, and the differentiation potential of hMSCs is not impaired. The immediate drop-on-demand technology enables accurate cell dosage and offers promising potential for single-cell applications. © 2014 Society for Laboratory Automation and Screening.

  5. Evaluating a national science and technology program using the human capital and relational asset perspectives.

    Science.gov (United States)

    Hung, Chia-Liang; Chou, Jerome Chih-Lung; Roan, Hung-Wei

    2010-11-01

    The purpose of this research is to evaluate the performance of the National Science and Technology Program (NSTP) by targeting the Taiwan National Telecommunication Program (NTP) initiated in 1998. The Taiwan telecommunications industry has prospered, currently occupying key positions in global markets even though NTP seldom contributes positively to patent citation performance. Hence, the authors of this study investigate the qualitative perspective of intellectual capital rather than quantitative technological indices. The current study focuses on both human capital and relational assets through surveys of 53 principal investigators of NTP projects and 63 industrial R&D managers of telecommunications corporations in the Taiwan market. Results show that NSTP member quality and the flow of employment are good indicators of human capital and that both perform better than the middle value in the case of Taiwan NTP. In addition, we find that industrial participants are more likely to share R&D resources than other academic researchers with higher intention of co-publishing, co-funding, and sharing equipment and facilities. The industrial NTP participants also have higher expectations regarding achieving advanced technology breakthroughs in contrast to non-NTP industrial interviewees. Moreover, industrial participants with greater industry-university cooperation intensity indeed obtain a particular advantage, that is, greater knowledge acquisition from other fields related to the effect of knowledge spillovers through the particular NSTP linkage. Accordingly, from the perspectives of human capital and relational assets, the authors conclude by articulating the importance of absorptive capacity resulting from good human capital and knowledge spillover contributed by relational assets within governmental technology policy and NSTP programming. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  6. Adolescence in New Zealand. Volume Two: Wider Perspectives.

    Science.gov (United States)

    Stewart, Robert A. C., Ed.

    This is the second of a two-volume collection of research-based readings dealing with the New Zealand adolescent. This volume considers the areas of drugs and delinquency, as well as the world of work and Maori-pakeha differences. The following topics are included: marihuana use; vocational aspiration; alcohol and tobacco use; Maori-pakeha…

  7. Polymeric particulate technologies for oral drug delivery and targeting: A pathophysiological perspective

    DEFF Research Database (Denmark)

    Hunter, A. Christy; Elsom, Jacqueline; Wibroe, Peter Popp

    2012-01-01

    Publication year: 2012 Source:Maturitas, Volume 73, Issue 1 A. Christy Hunter, Jacqueline Elsom, Peter P. Wibroe, S. Moein Moghimi The oral route for delivery of pharmaceuticals is the most widely used and accepted. Nanoparticles and microparticles are increasingly being applied within this arena....... It is the purpose of this review to describe these cutting edge technologies and specifically focus on the interaction and fate of these polymers within the gastrointestinal system....

  8. Human-computer interaction handbook fundamentals, evolving technologies and emerging applications

    CERN Document Server

    Sears, Andrew

    2007-01-01

    This second edition of The Human-Computer Interaction Handbook provides an updated, comprehensive overview of the most important research in the field, including insights that are directly applicable throughout the process of developing effective interactive information technologies. It features cutting-edge advances to the scientific knowledge base, as well as visionary perspectives and developments that fundamentally transform the way in which researchers and practitioners view the discipline. As the seminal volume of HCI research and practice, The Human-Computer Interaction Handbook feature

  9. Perspectives of System Informatics

    National Research Council Canada - National Science Library

    Bjørner, D

    1999-01-01

    The volume comprises extended abstracts of the papers selected for the presentation at the Third International Andrei Ershov Memorial Conference Perspectives of System Informatics, Akademgorodok (Novosibirsk, Russia), July 6-9, 1999...

  10. A survey of stakeholder perspectives on a proposed combined exoskeleton-wheelchair technology.

    Science.gov (United States)

    Bhatnagar, Tim; Ben Mortensen, W; Mattie, Johanne; Wolff, Jamie; Parker, Claire; Borisoff, Jaimie

    2017-07-01

    Exoskeleton technology has potential benefits for wheelchair users' health and mobility. However, there are practical barriers to their everyday use as a mobility device. In particular, challenges related to travelling longer distances and transitioning between using a wheelchair and exoskeleton walking may present significant deterrents to regular exoskeleton use. In an effort to remove these barriers, a combined exoskeleton-wheelchair concept ('COMBO') has been proposed, which aims to achieve the benefits of both these mobility technologies. Given the inherent importance of including user-stakeholder opinions when designing an assistive technology solution, a study was undertaken to explore the perspectives of wheelchair users and healthcare professionals on the proposed conceptual design of the COMBO. An online survey with quantitative and qualitative components was conducted with wheelchair users and healthcare professionals working directly with individuals with mobility impairments. Respondents rated whether they would use or recommend a COMBO for four potential reasons. Nine design features were rated and compared in terms of their importance. Content analysis was used to analyze data from an open-ended question regarding additional perceptions about using or recommending a COMBO. A total of 481 survey responses were analyzed, 354 from wheelchair users and 127 from healthcare professionals. Potential health benefits was the most highly rated reason for potential use or recommendation of a COMBO. Of the 9 design features, 2 had a median rating of very important: inclusion of a fall-protection mechanism, and the ability for the operator to use their hands while standing. Qualitative findings indicated that health and physical benefits, use for daily life activities, and psychosocial benefits were important considerations in whether to use or recommend the COMBO. This study captures the opinions and perspectives of two stakeholder groups for an exoskeleton

  11. Hands Deliverable 4.1.5: Evaluation of Prototype 2 - as seen from the perspective of persuasive technology

    DEFF Research Database (Denmark)

    Schärfe, Henrik; Aagaard, Morten; Øhrstrøm, Peter

    2011-01-01

    This document presents the results of the evaluation and testing of the HANDS ICT Tool Prototype 2 from the perspective of persuasive technology. It includes a presentation and a discussion of an evaluation based on a number of user interviews. It also includes an analysis and a discussion of the...

  12. Assisted reproductive technology: Islamic Sunni perspective.

    Science.gov (United States)

    Chamsi-Pasha, Hassan; Albar, Mohammed Ali

    2015-06-01

    Islam acknowledges that infertility is a significant hardship. Attempts to cure infertility are not only permissible, but also encouraged in Islam. Over the last three decades, a multitude of advances in assisted reproductive technologies (ARTs) have appeared. This review was carried out to inform readers, who are not familiar with Islamic doctrine, about the Sunni perspective on this topic. Systematic review of the literature. A series of searches was conducted of Medline databases published in English between January 1978 and December 2013 with the following assisted reproduction, infertility, gender selection, ethics, bioethics, and Islam. In Islamic Sunni law, all ARTs are allowed, provided that the source of the sperm, ovum, and uterus comes from a legally married couple during the span of their marriage. All forms of surrogacy are forbidden. A third-party donor is not allowed, whether he or she is providing sperm, eggs, embryos, or a uterus. Frozen preimplantation may be transferred to the wife in a successive cycle provided the marital bondage is not absolved by death or divorce. Gender selection for medical reasons is permitted. It is allowed for limited social reasons by some jurists, provided it does not involve discrimination against either sex. ART is acceptable and commendable in Islamic Sunni law provided it is practiced within the husband and wife dyad during the span of their marital contract. No third party should intrude upon the marital function of procreation. Surrogacy is not accepted by Sunni Islamic authorities.

  13. Current state of the technology measures of accident from contamination by the radioactive substance. 4. volume reduction of removing soil treatment technology

    International Nuclear Information System (INIS)

    Ito, Kenichi

    2015-01-01

    The removed materials that were generated via decontamination work and contaminated with radioactive cesium are mainly soil, the total amount of which is estimated at about 16 million to 22 million m3 in Fukushima Prefecture. Since cesium 137 has a short half-life of 30 years, the amount that needs final disposal after 30 years is expected to be 6 million m3 plus. In order to rationally and safely promote the transport, storage, and disposal of removed contaminants, volume reduction as much as possible is important, which requires relevant techniques. The biggest challenge of the volume reduction is an appropriate use of a low concentration of or purified/reproduced soil that occurs in the process. Since the recycled soil is not completely consumed only by intermediate processing facilities, there is a possibility to be used at outside facilities. There are needs for the tests and securement of qualities and standards according to the application, as well as the empirical data of practicality and long-term safety. It includes not only technical problem-solving, technology dissemination, and standardization, but also the construction of social acceptability. To do this, it is important that researchers and engineers in many fields in addition to those of soil jointly own common agenda and perform cross-cutting initiatives. After this, the social acceptance of volume reduction technology and the treatment of decontaminated waste would make a progress. (A.O.)

  14. SCC with high volume of fly ash content

    Directory of Open Access Journals (Sweden)

    Bakhrakh Anton

    2017-01-01

    Full Text Available Self-compacting concrete is a very perspective building material. It provides great benefits during the construction of heavily reinforced buildings. SCC has outstanding properties such as high flowability, dense structure and high strength due to specific quality of aggregates, fillers, their proportion in mix, use of polycarboxylate-based superplasticizers. Main disadvantages of SCC are high price and the difficulty of obtaining a proper mix. Use of fillers, such as fly ash type F, is a way to make SCC cheaper by replacing part of cement. Fly ash also provides some technological and operating advantages. In this paper the influence of high volume (60% from cement fly ash type F on the properties of concrete mixture and hardened concrete is investigated. The result of the work shows the possibility of reduction the cost of SCC using ordinary fillers and high amount of fly ash. The investigated SCC has low speed of hardening (7-day compressive strength at the range of 41.8 MPa and high volume of entrained air content (3.5%.

  15. Aerospace Technology Innovation. Volume 9

    Science.gov (United States)

    Turner, Janelle (Editor); Cousins, Liz (Editor)

    2001-01-01

    Commercializing technology is a daunting task. Of every 11 new product ideas, only one will successfully make it to the marketplace. Fully 46% of new product investment becomes sunk in cost. Yet, a few good companies consistently attain an 80% technology commercialization success rate and have lead the way in establishing best practices. The NASA Incubator program consists of nine incubators, each residing near a NASA research center. The purpose of the incubators is to use the best practices is to use the best practices of technology commercialization to help early stage businesses successfully launch new products that incorporate NASA technology.

  16. Fifth DOE symposium on enhanced oil and gas recovery and improved drilling technology. Volume 3. Gas and drilling

    Energy Technology Data Exchange (ETDEWEB)

    Linville, B. [ed.

    1979-01-01

    Volume 3 contains papers from the sessions on natural gas supporting research, western gas sands project, drilling technology, and environmental effects. Individuals were processed for inclusion in the Energy Data Base.

  17. IT4IT™ as a Management of Technology framework: Perspectives, implications and contributions

    DEFF Research Database (Denmark)

    Tambo, Torben; Filtenborg, Jacob

    2017-01-01

    Information technology (IT) is at the core of digitisation of existing business models and dominates in the innovation efforts of many industries. IT has until now in many ways been regarded as exempted from the structuration and automation represented by IT. The IT4IT framework released...... as a practical implementation of a Management of Technology framework and to review its perspectives and implications to the MoT society as well as the contributions it has to IT professionals, innovators and MoT practitioners. Methodologically this paper is based on an extensive case study of a large IT service...... from relative mature innovations to operational environments and life-cycle management. (2) IT4IT is driving IT further in the direction of commoditization and consumerization reducing uncertainty in IT implementation and operations and giving business stakeholders better opportunities for innovation...

  18. US Department of Energy interim mixed waste inventory report: Waste streams, treatment capacities and technologies: Volume 6, Appendices

    International Nuclear Information System (INIS)

    1993-04-01

    This volume contains Appendix A--Federal Facility Compliance Act of 1992, Appendix B--Technology Development, and Appendix C--Other Materials. Appendix B supplies details concerning the technology development activities supported by DOE in the area of mixed waste management. Two parts of this appendix are important. The more important of the two is the collection of technology development summaries. There are 267 summaries collected from several sources, which are described. The second important part consists of tables which group technologies by one several attributes such as target site and cross-complex applicability as well as relationship to Resource Conservation Recovery Act Best Demonstrated Available Technologies (RCRA BDATs)

  19. Student and Professor Perspectives on Exemplary Practices in the Use of Information and Communication Technologies (ICTs) and E-Learning in Colleges

    Science.gov (United States)

    King, Laura; Jorgensen, Mary; Lussier, Alex; Fichten, Catherine; Havel, Alice; Amsel, Rhonda; Poldma, Tiiu; Budd, Jillian; Jorgensen, Shirley; Marcil, Evelyne; Nguyen, Mai Nhu; Chauvin, Alexandre; Asuncion, Jennison

    2017-01-01

    Knowing that motivation is at the crux of learning, we examined students' motivation to engage--or not--in courses which include the use of information and communication technologies (ICTs). Although many college instructors use ICTs, there are no studies on the perspectives of professors identified as exemplary users of technology. This is why we…

  20. Nuclear technology in Germany in 1993

    International Nuclear Information System (INIS)

    1993-07-01

    On 28-29 January 1993, the Nuclear Safety Department of the Federal Office for Radiation Protection in co-operation with the Office of the Nuclear Safety Standards Commission organized a winter seminar on 'Nuclear technology in the Federal Republic in 1993 - tasks, problems, perspectives from the point of view of those concerned'. Main topics were the practical aspects of nuclear safety regulations and the application of the nuclear safety rules. This volume includes the welcome and opening addresses and the 12 papers presented; the views expressed remain, however the responsibility of the named authors and are not necessarily those of the editor. (orig.) [de

  1. 9th Pacific Basin Nuclear Conference. Nuclear energy, science and technology - Pacific partnership. Proceedings Volume 2

    International Nuclear Information System (INIS)

    1994-04-01

    The theme of the 9th Pacific Basin Nuclear Conference held in Sydney from 1-6 May 1994, embraced the use of atom in energy production and in science and technology. The focus was on selected topics of current and on-going interest to countries around the Pacific Basin. The two-volume proceedings include both invited and contributed papers which have been indexed separately. This document, Volume 2 covers the following topics: education and training in Nuclear Science, public acceptance, nuclear safety and radiation protection, nuclear fuel resources and their utilisation, research reactors, cyclotrons and accelerators. refs., tabs., figs., ills

  2. Study on green technologies and skills of tourism enterprises in Huangshan City based on environmental protection perspective

    Science.gov (United States)

    Bao, Jun

    2018-01-01

    With the rapid development of China's economy, air pollution, environmental degradation and other ecological problems emerge in an endless stream, a great threat to human health. In this context, the ecological civilization, sustainable development, economic transformation and upgrading and other green ideas emerge as the times require, and are highly concerned by the government, enterprises, academia and the public. From the perspective of tourism enterprises, through empirical research, this paper analyzes the influencing factors of green technologies and skills in tourism enterprises, and constructs the impact mechanism model of green technologies and skills. Put forward to promote enterprises to implement green management intention, suggestions to promote the practice of green technologies and skills.

  3. Perspective for Aquaponic Systems: "Omic" Technologies for Microbial Community Analysis.

    Science.gov (United States)

    Munguia-Fragozo, Perla; Alatorre-Jacome, Oscar; Rico-Garcia, Enrique; Torres-Pacheco, Irineo; Cruz-Hernandez, Andres; Ocampo-Velazquez, Rosalia V; Garcia-Trejo, Juan F; Guevara-Gonzalez, Ramon G

    2015-01-01

    Aquaponics is the combined production of aquaculture and hydroponics, connected by a water recirculation system. In this productive system, the microbial community is responsible for carrying out the nutrient dynamics between the components. The nutrimental transformations mainly consist in the transformation of chemical species from toxic compounds into available nutrients. In this particular field, the microbial research, the "Omic" technologies will allow a broader scope of studies about a current microbial profile inside aquaponics community, even in those species that currently are unculturable. This approach can also be useful to understand complex interactions of living components in the system. Until now, the analog studies were made to set up the microbial characterization on recirculation aquaculture systems (RAS). However, microbial community composition of aquaponics is still unknown. "Omic" technologies like metagenomic can help to reveal taxonomic diversity. The perspectives are also to begin the first attempts to sketch the functional diversity inside aquaponic systems and its ecological relationships. The knowledge of the emergent properties inside the microbial community, as well as the understanding of the biosynthesis pathways, can derive in future biotechnological applications. Thus, the aim of this review is to show potential applications of current "Omic" tools to characterize the microbial community in aquaponic systems.

  4. THE PERSPECTIVES OF INFORMATION AND COMMUNICATION TECHNOLOGY OF EDUCATION OF STUDENTS IN HIGHER EDUCATIONAL INSTITUTIONS OF UKRAINE

    Directory of Open Access Journals (Sweden)

    Oleksii Voronkin

    2015-10-01

    Full Text Available The article presents the results of the expert survey conducted to determine the perspective of development of information and communication technology of education of students in higher educational institutions of Ukraine. The lines of ICT development are forming four generalized sections (organizational, psychological and pedagogical, hardware and software, methodological sections. On the basis of an expert assessment are identified perspectives of 68 lines. The ranking of priority's lines of development of ICT are presented. It was determined that the greatest prospects will be: blended learning; research teaching method and heuristic teaching method; student-centered approach; increasing the role of informal education; the formation of students' abilities to independently acquire knowledge; short-term distance learning programs; portable computing devices; the new human machine interfaces; free and open-source software; cloud computing; artificial intelligence technology (search computing with elements of semantics, linguistic systems, decision support system; integrated, multidisciplinary and interdisciplinary training of teachers. Actualized question concerning the need to develop a system of standards in ICT environment.

  5. Information Technology Process Improvement Decision-Making: An Exploratory Study from the Perspective of Process Owners and Process Managers

    Science.gov (United States)

    Lamp, Sandra A.

    2012-01-01

    There is information available in the literature that discusses information technology (IT) governance and investment decision making from an executive-level perception, yet there is little information available that offers the perspective of process owners and process managers pertaining to their role in IT process improvement and investment…

  6. The technology vicinity: a location based view on technology

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.; Kocaoglu, D.F.; Anderson, T.R.

    2001-01-01

    The issue of technology transfer has been viewed from many different perspectives. In this case the focus is on the process of (production) technology transfer. One of the difficulties in studying international technology transfer is the definition of technology. The many technology definitions that

  7. Enhancing economic competiveness of dish Stirling technology through production volume and localization: Case study for Morocco

    Science.gov (United States)

    Larchet, Kevin; Guédez, Rafael; Topel, Monika; Gustavsson, Lars; Machirant, Andrew; Hedlund, Maria-Lina; Laumert, Björn

    2017-06-01

    The present study quantifies the reduction in the levelized cost of electricity (LCoE) and capital expenditure (CAPEX) of a dish Stirling power plant (DSPP) through an increase in localization and unit production volume. Furthermore, the localization value of the plant is examined to determine how much investment is brought into the local economy. Ouarzazate, Morocco, was chosen as the location of the study due to the country's favorable regulatory framework with regards to solar power technologies and its established industry in the concentrating solar power (CSP) field. A detailed techno-economic model of a DSPP was developed using KTH's in-house modelling tool DYESOPT, which allows power plant evaluation by means of technical and economic performance indicators. Results on the basis of LCoE and CAPEX were compared between two different cases of production volume, examining both a minimum and maximum level of localization. Thereafter, the DSPP LCoE and localization value were compared against competing solar technologies to evaluate its competitiveness. In addition, a sensitivity analysis was conducted around key design parameters. The study confirms that the LCoE of a DSPP can be reduced to values similar to solar photovoltaic (PV) and lower than other CSP technologies. Furthermore, the investment in the local economy is far greater when compared to PV and of the same magnitude to other CSP technologies. The competiveness of a DSPP has the potential to increase further when coupled with thermal energy storage (TES), which is currently under development.

  8. Science Fiction at the Far Side of Technology

    DEFF Research Database (Denmark)

    Johansen, Mikkel Willum

    2017-01-01

    This book explores what science fiction can tell us about the human condition in a technological world (with the dilemma's and consequences that this entails) and also engages with the genre at points where we apparently find it on the far side of science, technology or human existence. As such......, it is the result of the joint efforts of scholars and scientists from various disciplines. While some of the contributors to this volume have been working professionally with science fiction for some time, others are newcomers who bring perspectives from their own field of specialization to the study of this genre....... Although a scholarly work, this book is also designed to be accessible to a general audience that has an interest in science fiction as well as a broader academic audience. Aspiring (or experienced) science fiction writers may be interested in reading critical assessments of the science and technology...

  9. Women in sustainable agriculture and food biotechnology key advances and perspectives on emerging topics

    CERN Document Server

    2017-01-01

    This volume describes the contributions made by women scientists to the field of agricultural biotechnology, the most quickly adopted agricultural practice ever adopted. It features the perspectives of women educators, researchers and key stakeholders towards the development, implementation and acceptance of this modern technology. It describes the multiplying contemporary challenges in the field, how women are overcoming technological barriers, and their thoughts on what the future may hold. As sustainable agricultural practices increasingly represent a key option in the drive towards building a greener global community, the scientific, technological and implementation issues covered in this book are vital information for anyone working in environmental engineering. Provides a broad analysis of the science of agriculture, focusing on the contributions of women to the field, from basic research to applied technology Offers insights into hot topics in the field across the life cycle, from genetic engineering t...

  10. PDC 2016. Proceedings of the 14th Participatory Design Conference - Volume II

    DEFF Research Database (Denmark)

    Participatory Design in an Era of Participation : Introduction to volume 2 Participatory Design is a diverse collection of principles and practices aimed at making technologies, tools, environments, businesses and social institutions more responsive to human needs. A central tenet of Participatory...... is ‘Participatory Design in an Era of Participation’. Over 25 years after the first PDC in 1990, participation and co-creation have become essential features of design and research into technology. Living in an era of participation prompts critical questions around the goals and practices of involving people....... • In “Expanding the ‘How’ of Participatory Design”, five papers provide insights into techniques and methods that support novel perspectives on how participatory design activities might be practiced or reflected upon. This includes examples that should benefit practitioners and researchers who wish to think...

  11. Perspective of the applications of automatic identification technologies in the Serbian Army

    Directory of Open Access Journals (Sweden)

    Velibor V. Jovanović

    2012-07-01

    Full Text Available Without modern information systems, supply-chain management is almost impossible. Automatic identification technologies provide automated data processing, which contributes to improving the conditions and support decision making. Automatic identification technology media, notably BARCODE and RFID technology, are used as carriers of labels with high quality data and adequate description of material means, for providing a crucial visibility of inventory levels through the supply chain. With these media and the use of an adequate information system, the Ministry of Defense of the Republic of Serbia will be able to establish a system of codification and, in accordance with the NATO codification system, to successfully implement a unique codification, classification and determination of storage numbers for all tools, components and spare parts for their unequivocal identification. In the perspective, this will help end users to perform everyday tasks without compromising the material integrity of security data. It will also help command structures to have reliable information for decision making to ensure optimal management. Products and services that pass the codification procedure will have the opportunity to be offered in the largest market of armament and military equipment. This paper gives a comparative analysis of two automatic identification technologies - BARCODE, the most common one, and RFID, the most advanced one - with an emphasis on the advantages and disadvantages of their use in tracking inventory through the supply chain. Their possible application in the Serbian Army is discussed in general.

  12. SITE TECHNOLOGY CAPSULE: DYNAPHORE, INC., FORAGER SPONGE TECHNOLOGY

    Science.gov (United States)

    The Forager Sponge is a volume reduction technology in which heavy metal contaminants from an aqueous medium are selectively concentrated into a smaller volume for facilitated disposal. he technology treats contaminated groundwater, surface waters and porous waters by absorbing d...

  13. SITE TECHNOLOGY CAPSULE: DYNAPHORE, INC., FORAGER™ SPONGE TECHNOLOGY

    Science.gov (United States)

    The Forager™ Sponge is a volume reduction technology in which heavy metal contaminants from an aqueous medium are selectively concentrated into a smaller volume for facilitated disposal. The technology treats contaminated groundwater, surface waters, and process waters by absorbi...

  14. Field Operations and Enforcement Manual for Air Pollution Control. Volume II: Control Technology and General Source Inspection.

    Science.gov (United States)

    Weisburd, Melvin I.

    The Field Operations and Enforcement Manual for Air Pollution Control, Volume II, explains in detail the following: technology of source control, modification of operations, particulate control equipment, sulfur dioxide removal systems for power plants, and control equipment for gases and vapors; inspection procedures for general sources, fuel…

  15. The String Landscape: A Personal Perspective

    Science.gov (United States)

    Dienes, Keith R.

    2015-02-01

    In keeping with the "Perspectives" theme of this volume, this Chapter provides a personal perspective on the string landscape. Along the way, the perspectives of many other physicists are discussed as well. No attempt is made to provide a thorough and balanced review of the field, and indeed there is a slight emphasis on my own contributions to this field, as these contributions have been critical to forming my perspective. This Chapter is adapted from a Colloquium which I have delivered at a number of institutions worldwide, and I have attempted to retain the informal and non-technical spirit and style of this Colloquium presentation as much as possible.

  16. Proceedings of The Twentieth International Symposium on Space Technology and Science. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-31

    The 20th international symposium on space technology and science was held in Nagaragawa city, Gifu prefecture on May 19-25, 1996, and 401 papers were made public. Out of those, 112 papers were summed up as Volume 2 following the previous Volume 1. As to space transportation, the paper included reports titled as follows: Conceptual study of H-IIA rocket (upgraded H-II rocket); Test flight of the launch vehicle; International cooperation in space transportation; etc. Concerning microgravity science, Recent advances in microgravity research; Use of microgravity environment to investigate the effect of magnetic field on flame shape; etc. Relating to satellite communications and broadcasting, `Project GENESYS`: CRL`s R and D project for realizing high data rate satellite communications networks; The Astrolink {sup TM/SM} system; etc. Besides, the paper contained reports on the following fields: lunar and planetary missions and utilization, space science and balloons, earth observations, life science and human presence, international cooperation and space environment, etc

  17. Digital Disconnect or Digital Difference? A Socio-Ecological Perspective on Young Children's Technology Use in the Home and the Early Childhood Centre

    Science.gov (United States)

    Edwards, Susan; Henderson, Michael; Gronn, Donna; Scott, Anne; Mirkhil, Moska

    2017-01-01

    A digital disconnect perspective is founded on an assumption that technology use in the home is frequent, creative and generative, and that technology use in the early childhood centre should be the same as that found in the home. However, such arguments divert our attention from understanding the nature of the setting and thereby from an…

  18. Low-level radioactive waste from commercial nuclear reactors. Volume 1. Recommendations for technology developments with potential to significantly improve low-level radioactive waste management

    International Nuclear Information System (INIS)

    Rodgers, B.R.; Jolley, R.L.

    1986-02-01

    The overall task of this program was to provide an assessment of currently available technology for treating commercial low-level radioactive waste (LLRW), to initiate development of a methodology for choosing one technology for a given application, and to identify research needed to improve current treatment techniques and decision methodology. The resulting report is issued in four volumes. Volume 1 provides an executive summary and a general introduction to the four-volume set, in addition to recommendations for research and development (R and D) for low-level radioactive waste (LLRW) treatment. Generic, long-range, and/or high-risk programs identified and prioritized as needed R and D in the LLRW field include: (1) systems analysis to develop decision methodology; (2) alternative processes for dismantling, decontaminating, and decommissioning; (3) ion exchange; (4) incinerator technology; (5) disposal technology; (6) demonstration of advanced technologies; (7) technical assistance; (8) below regulatory concern materials; (9) mechanical treatment techniques; (10) monitoring and analysis procedures; (11) radical process improvements; (12) physical, chemical, thermal, and biological processes; (13) fundamental chemistry; (14) interim storage; (15) modeling; and (16) information transfer. The several areas are discussed in detail

  19. Aerospace Technology Innovation. Volume 10

    Science.gov (United States)

    Turner, Janelle (Editor); Cousins, Liz (Editor); Bennett, Evonne (Editor); Vendette, Joel (Editor); West, Kenyon (Editor)

    2002-01-01

    Whether finding new applications for existing NASA technologies or developing unique marketing strategies to demonstrate them, NASA's offices are committed to identifying unique partnering opportunities. Through their efforts NASA leverages resources through joint research and development, and gains new insight into the core areas relevant to all NASA field centers. One of the most satisfying aspects of my job comes when I learn of a mission-driven technology that can be spun-off to touch the lives of everyday people. NASA's New Partnerships in Medical Diagnostic Imaging is one such initiative. Not only does it promise to provide greater dividends for the country's investment in aerospace research, but also to enhance the American quality of life. This issue of Innovation highlights the new NASA-sponsored initiative in medical imaging. Early in 2001, NASA announced the launch of the New Partnerships in Medical Diagnostic Imaging initiative to promote the partnership and commercialization of NASA technologies in the medical imaging industry. NASA and the medical imaging industry share a number of crosscutting technologies in areas such as high-performance detectors and image-processing tools. Many of the opportunities for joint development and technology transfer to the medical imaging market also hold the promise for future spin back to NASA.

  20. Energy and Environment : volume 1

    OpenAIRE

    ANDRE, Michel; SAMARAS, Zissis; JACOB, Bernard

    2016-01-01

    This book is part of a set of six books called the 'Research for Innovative Transports' set. This collection presents an update of the latest academic and applied research, case studies, best practices and user perspectives on transport carried out in Europe and worldwide. The volumes are made up of a selection of the best papers presented at TRA2014. In this volume 1, recent research works are reported around the triptych : 'transport, energy and environment', which demonstrates that vehicl...

  1. Energy, technology and climatic policy: the world perspectives at the 2030 prospect. Key messages

    International Nuclear Information System (INIS)

    2003-01-01

    This paper comments the different points of the reference scenario described in the WETO study (World energy, technology and climate policy outlook). This scenario describes a world energy situation, assuming a continuation of the present day trends and structural changes. A comment is made for each of the following aspects of the scenario: world energy demand, share of fossil fuels in the world energy supplies, world CO 2 emissions, petroleum reserves, world petroleum, gas and coal productions, petroleum and gas prices trend, end-use energy demand, power production and natural gas share in power generation. Then, the document analyses the impact of changes linked with hydrocarbon resources and technology developments: reduction of hydrocarbon resources, increase of gas resources, acceleration of technological developments in power generation. A third part analyzes the natural gas market of the European Union in a world perspective: market, reserves, demand, supply risks. Finally, the last part presents the impact of environmental policies in the case of a CO 2 tax and in the case of a carbon abatement scenario. (J.S.)

  2. Progress report on nuclear science and technology in China (Vol.3). Proceedings of academic annual meeting of China Nuclear Society in 2013, No.9--nuclear technology applied in industry sub-volume

    International Nuclear Information System (INIS)

    2014-05-01

    Progress report on nuclear science and technology in China (Vol. 3) includes 35 articles which are communicated on the third national academic annual meeting of China Nuclear Society. There are 10 books totally. This is the ninth one, the content is about nuclear technology applied in industry sub-volume

  3. Viewing the Changing World of Educational Technology from a Different Perspective: Present Realities, Past Lessons, and Future Possibilities

    Science.gov (United States)

    Sanders, Martie; George, Ann

    2017-01-01

    This review paper focuses on likely reasons for the rhetoric-reality gap in the use of educational information and communication technology. It is based on the assumption that the present challenges being experienced with educational ICT might be avoided in the future if we look at the current challenges from a different perspective, by revisiting…

  4. Using the Artistic Pedagogical Technology of Photovoice to Promote Interaction in the Online Post-Secondary Classroom: The Students' Perspective

    Science.gov (United States)

    Edwards, Margaret; Perry, Beth; Janzen, Katherine; Menzies, Cynthia

    2012-01-01

    This study explores the effect of the artistic pedagogical technology (APT) called photovoice (PV) on interaction in the online post-secondary classroom. More specifically, this paper focuses on students' perspectives regarding the effect of PV on student to student and student to instructor interactions in online courses. Artistic pedagogical…

  5. 3rd Annual Disruptive Technology Conference

    Science.gov (United States)

    2006-09-07

    Panel -- The Warfighter’s Perspective The Impact of Disruptive Technologies on Joint Warfighting MG Michael Vane, USA, Vice Director for Force...Structure, Resources & Assessment, Joint Staff, J-8 Panel -- Perspectives of Change: Identifying the Emerging Commercial Disruptive Technologies Decision...Mark Lucas, Board Member OSGeo, RadiantBlue Technologies Panel -- The Search for Disruptive Technologies - a “Blue Force” Multiplier Advanced

  6. DYNAPHORE, INC., FORAGER SPONGE TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The Forager Sponge is a volume reduction technology in which heavy metal contaminants from an aqueous medium are selectively concentrated into a smaller volume for facilitated disposal. he technology treats contaminated groundwater, surface voters and porous waters by absorbing d...

  7. Cyanobacteria: an economic perspective

    NARCIS (Netherlands)

    Sharma, N.K.; Rai, A.K.; Stal, L.J.

    2014-01-01

    Written by leading experts in the field, Cyanobacteria: An Economic Perspective is a comprehensive edited volume covering all areas of an important field and its application to energy, medicine and agriculture. Issues related to environment, food and energy have presented serious challenge to the

  8. Exploration of new perspectives and limitations in Agrobacterium mediated gene transfer technology. Progress report, [June 1, 1992-- May 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Marton, L.

    1994-12-31

    This report describes progress aimed at constructing gene-transfer technology for Nicotiana plumbaginifolia. Most actual effort as described herein has so far been directed at exploring new perspectives and limitations in Agrobacterium mediated gene transfer. Accomplishments are described using a core homologous gene targeting vector.

  9. Assessing the Role of Technology in Citizen Science: A Volunteer's Perspective

    Science.gov (United States)

    Wei, J. H.; Force, A.

    2017-12-01

    From a volunteer's perspective, citizen science can provide a direct connection between outdoor enthusiasts and the scientists who study these natural environments. These experiences are both rewarding and engaging, as participants become aware of field sites, the scientific method, and their own environmental impacts. Recent technological advances (i.e. smart phones and mobile applications) have the potential to transform citizen science, specifically as technology can both enable and modernize the networks between a large community of potential volunteers and scientists using these data. By providing volunteers who venture into largely understudied and remote areas with an easy method for data collection and entry, it becomes easier to encourage volunteer engagement in science, while maintaining quality control over the data collection process. Participating in Adventure Scientists' projects demonstrates the application of technology as an effective engagement tool, especially when compared to traditional pen and paper surveys often conducted. Pairing volunteers with simple, familiar technology increases engagement, particularly for volunteers otherwise intimidated by the scientific process. When equipped with useful features, such as GPS functionality, smartphone apps offer a simple and standardized method of data collection and description. Yet a variety of factors can complicate field sampling; final choices are ultimately left to the judgment of the volunteer and perhaps could be guided by use of a phone/app. Importantly, Adventure Scientists conducts follow ups and volunteer surveys, which are critical to the continued evaluation of volunteer experiences and the sampling methods themselves. For future projects, creating a forum in which scientists and volunteers can interact (perhaps also through a phone app) could provide scientific context for volunteers, further investing them in the scientific process and their continued participation. Overall, the

  10. Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume IX. Reactor and fuel cycle description

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    The Nonproliferation Alterntive Systems Assessment Program (NASAP) has characterized and assessed various reactor/fuel-cycle systems. Volume IX provides, in summary form, the technical descriptions of the reactor/fuel-cycle systems studied. This includes the status of the system technology, as well as a discussion of the safety, environmental, and licensing needs from a technical perspective. This information was then used in developing the research, development, and demonstration (RD and D) program, including its cost and time frame, to advance the existing technology to the level needed for commercial use. Wherever possible, the cost data are given as ranges to reflect the uncertainties in the estimates.

  11. Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume IX. Reactor and fuel cycle description

    International Nuclear Information System (INIS)

    1980-06-01

    The Nonproliferation Alterntive Systems Assessment Program (NASAP) has characterized and assessed various reactor/fuel-cycle systems. Volume IX provides, in summary form, the technical descriptions of the reactor/fuel-cycle systems studied. This includes the status of the system technology, as well as a discussion of the safety, environmental, and licensing needs from a technical perspective. This information was then used in developing the research, development, and demonstration (RD and D) program, including its cost and time frame, to advance the existing technology to the level needed for commercial use. Wherever possible, the cost data are given as ranges to reflect the uncertainties in the estimates

  12. Perspective for Aquaponic Systems: “Omic” Technologies for Microbial Community Analysis

    Directory of Open Access Journals (Sweden)

    Perla Munguia-Fragozo

    2015-01-01

    Full Text Available Aquaponics is the combined production of aquaculture and hydroponics, connected by a water recirculation system. In this productive system, the microbial community is responsible for carrying out the nutrient dynamics between the components. The nutrimental transformations mainly consist in the transformation of chemical species from toxic compounds into available nutrients. In this particular field, the microbial research, the “Omic” technologies will allow a broader scope of studies about a current microbial profile inside aquaponics community, even in those species that currently are unculturable. This approach can also be useful to understand complex interactions of living components in the system. Until now, the analog studies were made to set up the microbial characterization on recirculation aquaculture systems (RAS. However, microbial community composition of aquaponics is still unknown. “Omic” technologies like metagenomic can help to reveal taxonomic diversity. The perspectives are also to begin the first attempts to sketch the functional diversity inside aquaponic systems and its ecological relationships. The knowledge of the emergent properties inside the microbial community, as well as the understanding of the biosynthesis pathways, can derive in future biotechnological applications. Thus, the aim of this review is to show potential applications of current “Omic” tools to characterize the microbial community in aquaponic systems.

  13. Perspective for Aquaponic Systems: “Omic” Technologies for Microbial Community Analysis

    Science.gov (United States)

    Munguia-Fragozo, Perla; Alatorre-Jacome, Oscar; Rico-Garcia, Enrique; Cruz-Hernandez, Andres; Ocampo-Velazquez, Rosalia V.; Garcia-Trejo, Juan F.; Guevara-Gonzalez, Ramon G.

    2015-01-01

    Aquaponics is the combined production of aquaculture and hydroponics, connected by a water recirculation system. In this productive system, the microbial community is responsible for carrying out the nutrient dynamics between the components. The nutrimental transformations mainly consist in the transformation of chemical species from toxic compounds into available nutrients. In this particular field, the microbial research, the “Omic” technologies will allow a broader scope of studies about a current microbial profile inside aquaponics community, even in those species that currently are unculturable. This approach can also be useful to understand complex interactions of living components in the system. Until now, the analog studies were made to set up the microbial characterization on recirculation aquaculture systems (RAS). However, microbial community composition of aquaponics is still unknown. “Omic” technologies like metagenomic can help to reveal taxonomic diversity. The perspectives are also to begin the first attempts to sketch the functional diversity inside aquaponic systems and its ecological relationships. The knowledge of the emergent properties inside the microbial community, as well as the understanding of the biosynthesis pathways, can derive in future biotechnological applications. Thus, the aim of this review is to show potential applications of current “Omic” tools to characterize the microbial community in aquaponic systems. PMID:26509157

  14. Volume reduction technology development for solid wastes from the nuclear fuel cycle

    International Nuclear Information System (INIS)

    Oh, Won Zin; Lee, Kune Woo; Song, Kee Chan; Choi, Wang Kyu; Kim, Young Min

    1998-07-01

    A great deal of solid wastes, which have various physical, chemical, and radiological characteristics, are generated from the nuclear fuel cycle facility as well as radioactive gaseous and liquid wastes. The treatment of the large quantity of solid wastes from the nuclear fuel cycle have great technical, economical and social effects on the domestic policy decision on the nuclear fuel cycle, such as operation and maintenance of the facility, waste disposal, etc. Cement immobilization, super compaction, and electrochemical dissolution were selected as the volume reduction technologies for solid wastes, which will generated from the domestic nuclear fuel cycle facility in the future. And the assessment of annual arisings and the preliminary conceptual design of volume reduction processes were followed. Electrochemical decontamination of α-radionuclides from the spent fuel hulls were experimentally investigated, and showed the successful results. However, β/γ radioactivity did not reduce to the level below which hulls can be classified as the low-level radioactive waste and sent to the disposal site for the shallow land burial. The effects of the various process variables in the electrochemical decontamination were experimentally analysed on the process. (author). 32 refs., 32 tabs., 52 figs

  15. Progress in nuclear energy. Volume 10

    International Nuclear Information System (INIS)

    Williams, M.M.R.; McCormick, N.J.

    1983-01-01

    This book consists of 15 articles written by specialists in the field of atomic energy. A significant portion of this volume is devoted to a special section reporting on the impact of the accident at Three Mile Island on the nuclear power industry. Changes in reactor instrumentation, operator training, and emergency preparedness are discussed in detail. A paper reporting on the effects of the accident on the public's attitude toward nuclear power is included in this section. Contents, abridged: The safety of CO 2 cooled reactor technology. Denaturing fissile materials. Impact of the Three Mile Island accident on the nuclear power industry; changes in the nuclear power industry after TMI; impact of TMI on combustion engineering technical activities. Impact of the accident at Three Mile Island on a NSSS vendor--a Westinghouse perspective; emergency planning and preparedness since Three Mile Island. The impact of TMI upon the public acceptance of nuclear power

  16. A Behavioral Model of Managerial Perspectives Regarding Technology Acceptance in Building Energy Management Systems

    Directory of Open Access Journals (Sweden)

    Jacky Chin

    2016-07-01

    Full Text Available The Building Energy Management System (BEMS, a well-known system that has been implemented in some energy corporations, has become attractive to many companies seeking to better monitor their energy consumption efficiency. This study investigated the external factors that influence acceptance of the BEMS from managerial perspectives. An extended model based on the Technology Acceptance Model (TAM was created to evaluate the implementation of the BEMS in the manufacturing industries. A structural equation modeling (SEM approach was used to analyze the model by adopting compatibility, features, technology complexity, and perceived risk as the external variables, and integrating the five dimensions of perceived ease of use, perceived usefulness, attitude, user satisfaction, and behavioral intention. The analysis results indicated that the external factors positively influenced users’ behavioral intention to use the BEMS through expected satisfaction, perceived ease of use, and perceived usefulness. Suggestions for BEMS developers are provided as well.

  17. Perspectives in new telecomunications technologies

    OpenAIRE

    José Emilio Navas López

    1989-01-01

    We have tried to analyse the perspectives for the European Community and Spain in an important sector for the future like the telecommunications one. The telecommunications sector must be considered as an strategic sector, because it is going to be one of the basis for the future economic development for most of the countries in the next years. The telecommunications policies in the Community and in Spain are oriented to achieve a more free and competitive market without sorne of the nowadays...

  18. Risoe energy report 9. Non-fossil energy technologies in 2050 and beyond

    International Nuclear Information System (INIS)

    Larsen, Hans; Soenderberg Petersen, L.

    2010-11-01

    This Risoe Energy Report, the ninth in a series that began in 2002, analyses the long-term outlook for energy technologies in 2050 in a perspective where the dominating role of fossil fuels has been taken over by non-fossil fuels, and CO 2 emissions have been reduced to a minimum. Against this background, the report addresses issues like: 1) How much will today's non-fossil energy technologies have evolved up to 2050? 2) Which non-fossil energy technologies can we bring into play in 2050, including emerging technologies? 3) What are the implications for the energy system? Further, Volume 9 analyses other central issues for the future energy supply: 4) The role of non-fossil energy technologies in relation to security of supply and sustainability 5) System aspects in 2050 6) Examples of global and Danish energy scenarios in 2050 The report is based on the latest research results from Risoe DTU, together with available international literature and reports. (Author)

  19. Risoe energy report 9. Non-fossil energy technologies in 2050 and beyond

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Hans; Soenderberg Petersen, L. (eds.)

    2010-11-15

    This Risoe Energy Report, the ninth in a series that began in 2002, analyses the long-term outlook for energy technologies in 2050 in a perspective where the dominating role of fossil fuels has been taken over by non-fossil fuels, and CO{sub 2} emissions have been reduced to a minimum. Against this background, the report addresses issues like: 1) How much will today's non-fossil energy technologies have evolved up to 2050? 2) Which non-fossil energy technologies can we bring into play in 2050, including emerging technologies? 3) What are the implications for the energy system? Further, Volume 9 analyses other central issues for the future energy supply: 4) The role of non-fossil energy technologies in relation to security of supply and sustainability 5) System aspects in 2050 6) Examples of global and Danish energy scenarios in 2050 The report is based on the latest research results from Risoe DTU, together with available international literature and reports. (Author)

  20. Integration of Parent and Nurse Perspectives of Communication to Plan Care for Technology Dependent Children: The Theory of Shared Communication.

    Science.gov (United States)

    Giambra, Barbara K; Broome, Marion E; Sabourin, Teresa; Buelow, Janice; Stiffler, Deborah

    The purpose of this qualitative research study was to expand our understanding of the process of communication between parents of hospitalized technology dependent children and their nurses originally detailed in the Theory of Shared Communication (TSC). This grounded theory study was conducted with five parents of technology dependent children hospitalized in a large Midwestern children's hospital and nine nurses who care for technology dependent children admitted to the same hospital during July and August 2013. Semi-structured interviews and journals (parents only), field notes and a demographic survey were used to collect data which was analyzed using constant comparative analysis. Parents verified the concepts of the TSC and relationships among them. Nurses' perceptions of communication with parents reflected the same parent identified and verified concepts upon which the TSC was originally grounded including respect for own and other's expertise, asking, listening, explaining, advocating, verifying understanding and negotiating roles to achieve mutual understanding of the child's plan of care. The nurses' perceptions differed stylistically but not categorically from those of the parents. The addition of the nurse's perspectives to the verified TSC expands our understanding of this process of communication. With the integration of nurse and parent perspectives, the TSC can be used to enhance communication and care for hospitalized technology dependent children and their families. Copyright © 2017 Elsevier Inc. All rights reserved.

  1. Advancing automation and robotics technology for the Space Station and for the US economy. Volume 1: Executive overview

    Science.gov (United States)

    1985-01-01

    In response to Public Law 98-371, dated July 18, 1984, the NASA Advanced Technology Advisory Committee has studied automation and robotics for use in the Space Station. The Executive Overview, Volume 1 presents the major findings of the study and recommends to NASA principles for advancing automation and robotics technologies for the benefit of the Space Station and of the U.S. economy in general. As a result of its study, the Advanced Technology Advisory Committee believes that a key element of technology for the Space Station is extensive use of advanced general-purpose automation and robotics. These systems could provide the United States with important new methods of generating and exploiting space knowledge in commercial enterprises and thereby help preserve U.S. leadership in space.

  2. Perspectives for induced pluripotent stem cell technology: new insights into human physiology involved in somatic mosaicism.

    Science.gov (United States)

    Nagata, Naoki; Yamanaka, Shinya

    2014-01-31

    Induced pluripotent stem cell technology makes in vitro reprogramming of somatic cells from individuals with various genetic backgrounds possible. By applying this technology, it is possible to produce pluripotent stem cells from biopsy samples of arbitrarily selected individuals with various genetic backgrounds and to subsequently maintain, expand, and stock these cells. From these induced pluripotent stem cells, target cells and tissues can be generated after certain differentiation processes. These target cells/tissues are expected to be useful in regenerative medicine, disease modeling, drug screening, toxicology testing, and proof-of-concept studies in drug development. Therefore, the number of publications concerning induced pluripotent stem cells has recently been increasing rapidly, demonstrating that this technology has begun to infiltrate many aspects of stem cell biology and medical applications. In this review, we discuss the perspectives of induced pluripotent stem cell technology for modeling human diseases. In particular, we focus on the cloning event occurring through the reprogramming process and its ability to let us analyze the development of complex disease-harboring somatic mosaicism.

  3. Progress report on nuclear science and technology in China (Vol.3). Proceedings of academic annual meeting of China Nuclear Society in 2013, No.7--pulse power technology and its application sub-volume

    International Nuclear Information System (INIS)

    2014-05-01

    Progress report on nuclear science and technology in China (Vol. 3) includes 18 articles which are communicated on the third national academic annual meeting of China Nuclear Society. There are 10 books totally. This is the seventh one, the content is about pulse power technology and its application sub-volume

  4. Progress report on nuclear science and technology in China (Vol.3). Proceedings of academic annual meeting of China Nuclear Society in 2013, No.7--Nuclear electronics and nuclear detection technology sub-volume

    International Nuclear Information System (INIS)

    2014-05-01

    Progress report on nuclear science and technology in China (Vol. 3) includes 57 articles which are communicated on the third national academic annual meeting of China Nuclear Society. There are 10 books totally. This is the seventh one, the content is about Nuclear electronics and nuclear detection technology sub-volume

  5. Progress report on nuclear science and technology in China (Vol.3). Proceedings of academic annual meeting of China Nuclear Society in 2013, No.10--nuclear technology economy and management modernization sub-volume

    International Nuclear Information System (INIS)

    2014-05-01

    Progress report on nuclear science and technology in China (Vol. 3) includes 18 articles which are communicated on the third national academic annual meeting of China Nuclear Society. There are 10 books totally. This is the tenth one, the content is about nuclear technology economy and management modernization sub-volume

  6. Past and present energy societies. How energy connects politics, technologies and cultures

    Energy Technology Data Exchange (ETDEWEB)

    Moellers, Nina; Zachmann, Karin (eds.)

    2012-07-01

    Abundant, salutary, problematic - energy makes history. As a symbol, resource and consumer good, it shapes technologies, politics, societies and cultural world views. Focussing on a range of energy types, from electricity and oil to bioenergy, this volume analyzes the social, cultural and political concepts and discourses of energy and their implementation and materialization within technical systems, applications, media representations and consumer practice. By examining and connecting production, mediation and consumption aspects from an international and interdisciplinary perspective, the book offers an innovative view on how energy is imagined, discussed, staged and used.

  7. The Perceived Influence of Industry-Sponsored Credentials on the Recruitment Process in the Information Technology Industry: Employer and Employee Perspectives

    Science.gov (United States)

    Bartlett, Kenneth R.; Horwitz, Sujin K.; Ipe, Minu; Liu, Yuwen

    2005-01-01

    The increase in the number of industry-sponsored credential programs raises many questions for career and technical education. This study investigated the perceived influence of industry-sponsored credentials on the recruitment process in the information technology (IT) field. Influence is examined from the perspective of Human Resource (HR)…

  8. Sustainability of University Technology Transfer: Mediating Effect of Inventor’s Technology Service

    Directory of Open Access Journals (Sweden)

    Fang Li

    2018-06-01

    Full Text Available Based on the perspective of knowledge transfer and the technology acceptance model (TAM, this paper constructs a university technology transfer sustainable development model that considers the inventor’s technology service from the perspective of the long-term cooperation of enterprise, and analyzes the mediating effect of the inventor’s technology service on university technology transfer sustainability. By using 270 questionnaires as survey data, it is found that the availability of an inventor’s technology service has a significant positive impact on the attitude tendency and practice tendency of enterprise long-term technological cooperation; enterprise technology absorption capacity and trust between a university and an enterprise also have significant influence on an inventor’s technical service availability. Therefore, the inventor’s technology service acts as a mediator in the relationship between university technology transfer sustainability and influence factors. Universities ought to establish the technology transfer model, which focuses on the inventor’s tacit knowledge transfer service, and promotes the sustainable development of the university.

  9. Technology and Technique: An Educational Perspective

    Science.gov (United States)

    Isman, Aytekin

    2012-01-01

    Today, technology is developing very fast around the world. This technological development (hardware and software) affects our life. There is a relationship among technology, society, culture, organization, machines, technical operation, and technical phenomenon. Educators should know this relationship because technology begins to affect teaching…

  10. Technological Determinism in Educational Technology Research: Some Alternative Ways of Thinking about the Relationship between Learning and Technology

    Science.gov (United States)

    Oliver, M.

    2011-01-01

    This paper argues that research on the educational uses of technology frequently overemphasizes the influence of technology. Research in the field is considered a form of critical perspective, and assumptions about technology are questioned. Technological determinism is introduced, and different positions on this concept are identified. These are…

  11. Living and ageing in the technological landscapes of homes and public places - an international perspective

    DEFF Research Database (Denmark)

    Helle, Tina; Kottorp, Anders; Gudetti, Susanne

    upon the use of new, innovative assessments and intervention strategies to address ET use and public places, and understand how these can support evidence-based intervention planning in practice. Methods: The teaching methods will be interactive sessions based upon open-space methodology, using: (1...... and participation in public places for people with functional impairments, while little is still known of the cognitive aspects of accessibility. In order to access and use homes and public spaces (including health care services, crucial challenges are associated with technology, both everyday technology (e.g. cell...... places for the target group of his/her practice, (2) Reflect upon challenges in access/use of public places and ET from a multicultural perspective , (3) Know about current international research in occupational therapy in this area, and how this can be implemented into his/her practice, and (4) Reflect...

  12. The technology vicinity: a location based view on technology

    OpenAIRE

    Steenhuis, H.J.; de Bruijn, E.J.; Kocaoglu, D.F.; Anderson, T.R.

    2001-01-01

    The issue of technology transfer has been viewed from many different perspectives. In this case the focus is on the process of (production) technology transfer. One of the difficulties in studying international technology transfer is the definition of technology. The many technology definitions that exist are either too ‘loosely’ formulated or they require thorough expert knowledge. This results in difficulties with measuring technology and comparing different studies meaningfully. This study...

  13. Sustainable manufacturing challenges, solutions and implementation perspectives

    CERN Document Server

    Seliger, Günther; Bonvoisin, Jérémy

    2017-01-01

    Sustainability imposes an unprecedented challenge on society and has become the driving force of an urgent search for innovative solutions in all branches of economy. Manufacturing plays a key role in many areas of human living, and it is both part of the problem and of the solution. This book offers an overview of the broad field of research on sustainability in manufacturing with a particular focus on manufacturing technology and management. It summarizes the current challenges, describes best in class methods for development of sustainable manufacturing solutions and offers implementation perspectives. This volume covers areas of research such as production processes, product development, business model and corporate development, macro economy and education. The target audience primarily comprises research experts and practitioners in the field of manufacturing, but the book may also be beneficial for graduate students. .

  14. Data summary of municipal solid waste management alternatives. Volume 3, Appendix A: Mass burn technologies

    Energy Technology Data Exchange (ETDEWEB)

    None

    1992-10-01

    This appendix on Mass Burn Technologies is the first in a series designed to identify, describe and assess the suitability of several currently or potentially available generic technologies for the management of municipal solid waste (MSW). These appendices, which cover eight core thermoconversion, bioconversion and recycling technologies, reflect public domain information gathered from many sources. Representative sources include: professional journal articles, conference proceedings, selected municipality solid waste management plans and subscription technology data bases. The information presented is intended to serve as background information that will facilitate the preparation of the technoeconomic and life cycle mass, energy and environmental analyses that are being developed for each of the technologies. Mass burn has been and continues to be the predominant technology in Europe for the management of MSW. In the United States, the majority of the existing waste-to-energy projects utilize this technology and nearly 90 percent of all currently planned facilities have selected mass burn systems. Mass burning generally refers to the direct feeding and combustion of municipal solid waste in a furnace without any significant waste preprocessing. The only materials typically removed from the waste stream prior to combustion are large bulky objects and potentially hazardous or undesirable wastes. The technology has evolved over the last 100 or so years from simple incineration to the most highly developed and commercially proven process available for both reducing the volume of MSW and for recovering energy in the forms of steam and electricity. In general, mass burn plants are considered to operate reliably with high availability.

  15. Becoming allies: Combining social science and technological perspectives to improve energy research and policy making

    Energy Technology Data Exchange (ETDEWEB)

    Diamond, Rick; Moezzi, Mithra

    2002-07-01

    Within the energy research community, social sciences tends to be viewed fairly narrowly, often as simply a marketing tool to change the behavior of consumers and decision makers, and to ''attack market barriers''. As we see it, social sciences, which draws on sociology, psychology, political science, business administration, and other academic disciplines, is capable of far more. A social science perspective can re-align questions in ways that can lead to the development of technologies and technology policy that are much stronger and potentially more successful than they would be otherwise. In most energy policies governing commercial buildings, the prevailing R and D directives are firmly rooted in a technology framework, one that is generally more quantitative and evaluative than that fostered by the social sciences. To illustrate how social science thinking would approach the goal of achieving high energy performance in the commercial building sector, they focus on the US Department of Energy's Roadmap for commercial buildings (DOE 2000) as a starting point. By ''deconstructing'' the four strategies provided by the Roadmap, they set the stage for proposing a closer partnership between advocates of technology-based and social science-based approaches.

  16. Geometry of lengths, areas, and volumes two-dimensional spaces, volume 1

    CERN Document Server

    Cannon, James W

    2017-01-01

    This is the first of a three volume collection devoted to the geometry, topology, and curvature of 2-dimensional spaces. The collection provides a guided tour through a wide range of topics by one of the twentieth century's masters of geometric topology. The books are accessible to college and graduate students and provide perspective and insight to mathematicians at all levels who are interested in geometry and topology. The first volume begins with length measurement as dominated by the Pythagorean Theorem (three proofs) with application to number theory; areas measured by slicing and scaling, where Archimedes uses the physical weights and balances to calculate spherical volume and is led to the invention of calculus; areas by cut and paste, leading to the Bolyai-Gerwien theorem on squaring polygons; areas by counting, leading to the theory of continued fractions, the efficient rational approximation of real numbers, and Minkowski's theorem on convex bodies; straight-edge and compass constructions, giving c...

  17. Involving patients in health technology funding decisions: stakeholder perspectives on processes used in Australia.

    Science.gov (United States)

    Lopes, Edilene; Street, Jackie; Carter, Drew; Merlin, Tracy

    2016-04-01

    Governments use a variety of processes to incorporate public perspectives into policymaking, but few studies have evaluated these processes from participants' point of view. The objective of this study was twofold: to understand the perspectives of selected stakeholders with regard to involvement processes used by Australian Advisory Committees to engage the public and patients; and to identify barriers and facilitators to participation. Twelve semi-structured interviews were conducted with representatives of different stakeholder groups involved in health technology funding decisions in Australia. Data were collected and analysed using a theoretical framework created by Rowe and Frewer, but adapted to more fully acknowledge issues of power and influence. Stakeholder groups disagreed as to what constitutes effective and inclusive patient involvement. Barriers reported by interviewees included poor communication, a lack of transparency, unworkable deadlines, and inadequate representativeness. Also described were problems associated with defining the task for patients and their advocates and with the timing of patient input in the decision-making process. Interviewees suggested that patient participation could be improved by increasing the number of patient organizations engaged in processes and including those organizations at different stages of decision making, especially earlier. The different evaluations made by stakeholder groups appear to be underpinned by contrasting conceptions of public involvement and its value, in line with Graham Martin's work which distinguishes between 'technocratic' and 'democratic' public involvement. Understanding stakeholders' perspectives and the contrasting conceptions of public involvement could foster future agreement on which processes should be used to involve the public in decision making. © 2015 John Wiley & Sons Ltd.

  18. Critical thinking instruction and technology enhanced learning from the student perspective: A mixed methods research study.

    Science.gov (United States)

    Swart, Ruth

    2017-03-01

    Critical thinking is acclaimed as a valuable asset for graduates from higher education programs. Technology has advanced in quantity and quality; recognized as a requirement of 21st century learners. A mixed methods research study was undertaken, examining undergraduate nursing student engagement with critical thinking instruction, platformed on two technology-enhanced learning environments: a classroom response system face-to-face in-class and an online discussion forum out-of-class. The Community of Inquiry framed the study capturing constructivist collaborative inquiry to support learning, and facilitate critical thinking capability. Inclusion of quantitative and qualitative data sources aimed to gather a comprehensive understanding of students' development of critical thinking and engagement with technology-enhanced learning. The findings from the students' perspectives were positive toward the inclusion of technology-enhanced learning, and use in supporting their development of critical thinking. Students considered the use of two forms of technology beneficial in meeting different needs and preferences, offering varied means to actively participate in learning. They valued critical thinking instruction being intentionally aligned with subject-specific content facilitating understanding, application, and relevance of course material. While the findings are limited to student participants, the instructional strategies and technology-enhanced learning identified as beneficial can inform course design for the development of critical thinking. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Discovering Complementary Colors from the Perspective of STEAM Education

    Science.gov (United States)

    Karabey, Burak; Koyunkaya, Melike Yigit; Enginoglu, Turan; Yurumezoglu, Kemal

    2018-01-01

    This study explored the theory and applications of complementary colors using a technology-based activity designed from the perspective of STEAM education. Complementary colors and their areas of use were examined from the perspective of physics, mathematics and art, respectively. The study, which benefits from technology, makes the theory of…

  20. Volume and Surface-Enhanced Volume Negative Ion Sources

    International Nuclear Information System (INIS)

    Stockli, M P

    2013-01-01

    H - volume sources and, especially, caesiated H - volume sources are important ion sources for generating high-intensity proton beams, which then in turn generate large quantities of other particles. This chapter discusses the physics and technology of the volume production and the caesium-enhanced (surface) production of H - ions. Starting with Bacal's discovery of the H - volume production, the chapter briefly recounts the development of some H - sources, which capitalized on this process to significantly increase the production of H - beams. Another significant increase was achieved in the 1990s by adding caesiated surfaces to supplement the volume-produced ions with surface-produced ions, as illustrated with other H - sources. Finally, the focus turns to some of the experience gained when such a source was successfully ramped up in H - output and in duty factor to support the generation of 1 MW proton beams for the Spallation Neutron Source. (author)

  1. Defining a National Web Sphere over time from the Perspectives of Collection, Technology and Scholarship

    DEFF Research Database (Denmark)

    Zierau, Eld; Brügger, Niels; Moesgaard, Jakob

    This paper describes a framework supporting definition of how to automatically identify national webpages outside a country’s top level domain. The framework aims at a definition that can be put into operation in order to make automatic detection of national web pages. At the same time...... the framework aims at a definition that can be reused independent of changed behaviours on the net, changes in jurisdiction and changes in technology. A crucial point in this framework is that the perspectives of collection, technology and Scholarship are present in decision making. The framework origins from...... harvests from the Danish national web archive, Netarkivet. However in both cases a definition of national webpages was needed. Thus the creation of the framework was a prerequisite for the rest of this study. Motivation of the study and framework is based on the fact that human communication activities...

  2. Using a Mixed Methods Research Design in a Study Investigating the "Heads of e-Learning" Perspective towards Technology Enhanced Learning

    Science.gov (United States)

    Almpanis, Timos

    2016-01-01

    This paper outlines the research design, methodology and methods employed in research conducted in the context of Higher Education Institutions (HEIs) and focuses on the Heads of e-Learning (HeLs) perspective about Technology Enhanced Learning (TEL) by campus-based UK institutions. This paper aims to expand on the research design and the research…

  3. Risoe energy report 6. Future options for energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, Hans; Soenderberg Petersen, L [eds.

    2007-11-15

    Fossil fuels provide about 80% of the global energy demand, and this will continue to be the situation for decades to come. In the European Community we are facing two major energy challenges. The first is sustainability, and the second is security of supply, since Europe is becoming more dependent on imported fuels. These challenges are the starting point for the present Risoe Energy Report 6. It gives an overview of the energy scene together with trends and emerging energy technologies. The report presents status and trends for energy technologies seen from a Danish and European perspective from three points of view: security of supply, climate change and industrial perspectives. The report addresses energy supply technologies, efficiency improvements and transport. The report is volume 6 in a series of reports covering energy issues at global, regional and national levels. The individual chapters of the report have been written by staff members from the Technical University of Denmark and Risoe National Laboratory together with leading Danish and international experts. The report is based on the latest research results from Risoe National Laboratory, Technical University of Denmark, together with available internationally recognized scientific material, and is fully referenced and refereed by renowned experts. Information on current developments is taken from the most up-to-date and authoritative sources available. Our target groups are colleagues, collaborating partners, customers, funding organizations, the Danish government and international organizations including the European Union, the International Energy Agency and the United Nations. (au)

  4. Current status and perspective of advanced loop type fast reactor in fast reactor cycle technology development project

    International Nuclear Information System (INIS)

    Niwa, Hajime; Aoto, Kazumi; Morishita, Masaki

    2007-01-01

    After selecting the combination of the sodium-cooled fast reactor (SFR) with oxide fuel, the advanced aqueous reprocessing and the simplified pelletizing fuel fabrication as the most promising concept of FR cycle system, 'Feasibility Study on Commercialized Fast Reactor Cycle Systems' was finalized in 2006. Instead, a new project, Fast Reactor Cycle Technology Development Project (FaCT Project) was launched in Japan focusing on development of the selected concepts. This paper describes the current status and perspective of the advanced loop type SFR system in the FaCT Project, especially on the design requirements, current design as well as the related innovative technologies together with the development road-map. Some considerations on advantages of the advanced loop type design are also described. (authors)

  5. Airborne radioactive emission control technology. Volume II

    International Nuclear Information System (INIS)

    Skoski, L.; Berlin, R.; Corby, D.; Clancy, J.; Hoopes, G.

    1980-03-01

    This report reviews the current and future control technology for airborne emissions from a wide variety of industries/facilities, including uranium mining and milling, other nuclear fuel cycle facilities, other NRC-licensed and DOE facilities, fossil fuel facilities, selected metal and non-metal extraction industries, and others. Where specific radioactivity control technology is lacking, a description of any existing control technology is given. Future control technology is assessed in terms of improvements to equipment performance and process alterations. A catalogue of investigated research on advanced control technologies is presented

  6. Airborne radioactive emission control technology. Volume III

    International Nuclear Information System (INIS)

    Skoski, L.; Berlin, R.; Corby, D.; Clancy, J.; Hoopes, G.

    1980-03-01

    This report reviews the current and future control technology for airborne emissions from a wide variety of industries/facilities, including uranium mining and milling, other nuclear fuel cycle facilities, other NRC-licensed and DOE facilities, fossil fuel facilities, selected metal and non-metal extraction industries, and others. Where specific radioactivity control technology is lacking, a description of any existing control technology is given. Future control technology is assessed in terms of improvements to equipment performance and process alterations. A catalogue of investigated research on advanced control technologies is presented

  7. Airborne radioactive emission control technology. Volume I

    International Nuclear Information System (INIS)

    Skoski, L.; Berlin, R.; Corby, D.; Clancy, J.; Hoopes, G.

    1980-03-01

    This report reviews the current and future control technology for airborne emissions from a wide variety of industries/facilities, includimg uranium mining and milling, other nuclear fuel cycle facilities, other NRC-licensed and DOE facilities, fossil fuel facilities, selected metal and non-metal extraction industries, and others. Where specific radioactivity control technology is lacking a description of any existing control technology is given. Future control technology is assessed in terms of improvements to equipment performance and process alterations. A catalogue of investigated research on advanced control technologies is presented

  8. Proceedings of the international symposium on environmental technologies: Plasma systems and applications. Volume 1

    International Nuclear Information System (INIS)

    Mayne, P.W.; Mulholland, J.A.

    1995-01-01

    Plasma technology is an extremely versatile and powerful means of obtaining very high temperatures that can be used in a variety of environmental situations. Since most types of waste products and contaminants can be treated effectively and efficiently, plasma systems have been developed to address the disposal and annihilation domestic of medical, hazardous, radioactive, military, and miscellaneous wastes. Plasma technologies can also be implemented to recycle and recover usable materials from metallic wastes. The International Symposium on Environmental Technologies: Plasma Systems and Applications was held at the Omni Hotel in Atlanta, Georgia on October 8--12, 1995 to bring together a large group of technical experts working on the use of plasma for solving environmental problems. The Symposium is a sequel to the 1994 Metatechnies Conference on Stabilization and Volarization of Ultimate Waste by Plasma Processes that was held in September of 1994 at Bordeaux Lac, France. The proceedings to this second international conference contain the written contributions from eleven sessions and are published in two volumes. A total of 65 papers address the use of plasma systems for environmental applications and include topics concerning the development and use of innovative technologies for waste treatment, environmental remediation, recycling, characterization of the plasma and solid residue, off-gas analyses, as well as case studies and regulatory policies

  9. Perspectives in Education: Submissions

    African Journals Online (AJOL)

    In addition to the Perspectives in Education, Volume 26(4), December 2008 conventional book review format, ... PiE invites short reports on any aspect of theory and practice in academia. ... Name(s) of the author(s), title(s), and affiliation(s) (should not be disclosed in the text). The user ... Unpublished theses or dissertations:.

  10. Marketing technologically advanced products

    NARCIS (Netherlands)

    Bender, Horst

    1989-01-01

    This paper calls for a merger of technology and marketing under a customer value perspective; for an enhancement of the traditional technological innovation orientation of the technology-based firm with a market thrust. It establishes technology-based products as product-service offerings that are

  11. Cooperative strategies European perspectives

    CERN Document Server

    Killing, J Peter

    1997-01-01

    Cooperative Strategies: European Perspectives is one of three geographically targeted volumes in which the contributors present the most current research on topics such as advances in theories of cooperative strategies, the formation of cooperative alliances, the dynamics of partner relationships, and the role of information and knowledge in cooperative alliances. Blending conceptual insights with empirical analyses, the contributors highlight commonalities and differences across national, cultural, and trade zones. The chapters in this volume are anchored in a wide set of theoretical approaches, conceptual frameworks, and models, illustrating how rich the area of cooperative strategies is for scholarly inquiry.

  12. Examining the Relationship among High-School Teachers' Technology Self-Efficacy, Attitudes towards Technology Integration, and Quality of Technology Integration

    Science.gov (United States)

    Gonzales, Stacey

    2013-01-01

    This quantitative study explored the relationships among high-school teachers' (n = 74) technology self-efficacy, teachers' attitudes towards technology integration, and quality of teachers' technology integration into instruction. This study offered the unique perspectives of in-service high-school teachers as they have first-hand experience…

  13. Health risks in perspective: Judging health risks of energy technologies. Revision 5/94

    Energy Technology Data Exchange (ETDEWEB)

    Rowe, M.D.

    1992-09-01

    The purpose of this report is to provide perspective on the various risks to which man is routinely exposed. It serves as a basis for understanding the meaning of quantitative risk estimates and for comparing new or newly-discovered risks with other, better-understood risks. Specific emphasis is placed on health risks of energy technologies. This report is not a risk assessment; nor does it contain instructions on how to do a risk assessment. Rather, it provides background information on how most of us think about risks and why it is difficult to do it rationally, it provides a philosophy and data with which to do a better job of judging risks more rationally, and it provides an overview of where risks of energy technologies fit within the spectrum of all risks. Much of the quantitative information provided here is on relative risk of dying of various causes. This is not because risk of dying is seen as the most important kind of risk, but because the statistics on mortality rates by cause are the highest quality data available on health risks in the general population.

  14. A psychological perspective on money

    NARCIS (Netherlands)

    Bijleveld, E.H.; Aarts, H.A.G.; Bijleveld, E.H.; Aarts, H.A.G.

    2014-01-01

    A thriving field of inquiry, the psychological science of money has recently witnessed an upsurge in research attention. In the present volume, we bring together and integrate a number of theoretical perspectives on the question of ‘how does money affect people’s mind, brain, and behavior?’

  15. Johann P. Arnason & Kurt A. Raaflaub, The Roman Empire in Context: Historical and Comparative Perspectives (Chichester: Wiley & Sons, 2011

    Directory of Open Access Journals (Sweden)

    Michael Gibbons

    2012-03-01

    Full Text Available Arnason and Raaflaub’s edited volume, The Roman Empire in Context: Historical and Comparative Perspectives, is the fifth volume in a series entitled The Ancient World: Comparative Histories. The overarching aim of the series is to bring a comparative perspective to studies of ancient histories, and earlier titles focus either on content or geography. This is the only volume to date that focuses on a specific civilization, and Rome is of course significant enough to merit its own volume.

  16. Keep in touch (KIT): perspectives on introducing internet-based communication and information technologies in palliative care.

    Science.gov (United States)

    Guo, Qiaohong; Cann, Beverley; McClement, Susan; Thompson, Genevieve; Chochinov, Harvey Max

    2016-08-02

    Hospitalized palliative patients need to keep in touch with their loved ones. Regular social contact may be especially difficult for individuals on palliative care in-patient units due to the isolating nature of hospital settings. Technology can help mitigate isolation by facilitating social connection. This study aimed to explore the acceptability of introducing internet-based communication and information technologies for patients on a palliative care in-patient unit. In the first phase of the Keep in Touch (KIT) project, a diverse group of key informants were consulted regarding their perspectives on web-based communication on in-patient palliative care units. Participants included palliative patients, family members, direct care providers, communication and information technology experts, and institutional administrators. Data was collected through focus groups, interviews and drop-in consultations, and was analyzed for themes, consensus, and major differences across participant groups. Hospitalized palliative patients and their family members described the challenges of keeping in touch with family and friends. Participants identified numerous examples of ways that communication and information technologies could benefit patients' quality of life and care. Patients and family members saw few drawbacks associated with the use of such technology. While generally supportive, direct care providers were concerned that patient requests for assistance in using the technology would place increased demands on their time. Administrators and IT experts recognized issues such as privacy and costs related to offering these technologies throughout an organization and in the larger health care system. This study affirmed the acceptability of offering internet-based communication and information technologies on palliative care in-patient units. It provides the foundation for trialing these technologies on a palliative in-patient unit. Further study is needed to confirm the

  17. Electric power in the competitive market - Investing capital for cleaner energy generation still a rewarding business? New perspectives for electrical energy efficiency improvement, the cogeneration technology, and renewable energy generation

    International Nuclear Information System (INIS)

    Schwanhold, E.

    2000-01-01

    The meeting gathered policymakers, members of the energy industry, the business consulting professions, and scientific institutes and relevant technology companies. New perspectives have been discussed in the context of required framework conditions and processes that have to/can be put in place, or further developed, in order to create a concrete basis or stronger incentives for realisation of climate protection and environmental policy goals in the energy sector. There have been two panel discussions on the issue of whether investing in clean generation technologies will be rewarding. Five papers each presented to these panels have been analysed and prepared for separate retrieval from the database, as well as five papers each of the discussion forum A, ''New perspectives for energy efficiency measures and contracting partnerships'', and the discussion forum B, ''New perspectives for distributed power generation with CHP systems''. From the discussion forum C, ''New perspectives for renewable energy sources'', one paper has been prepared for separate retrieval. (CB) [de

  18. A PERSPECTIVE OF MALAY QUATRAIN IN MEDIA TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Arbaie SUJUD

    2012-06-01

    Full Text Available Malay quatrain has been introduced since long time ago among the Malay communities. It has also been used until today in formal ceremonies like the weddings, meetings and speeches. The Malay quatrain has also been taught in schools in order to inculcate the culture among children at young age. Therefore, this study ascertains the perspective of Malay quatrain in the media technology. The objectives of the study were to identify the types of Malay quatrain favored by the students and discuss the interactions of the students during the process of learning. The samples of the study involved 20 volunteered subjects from a school in Malaysia. The subjects were nine year olds male and female students. The subjects were given a website which consists of Malay quatrain activities. The Malay quatrains consisted of moral values that were able to be understood among the students. The subjects were in pairs and they were to try out the website and discuss their opinion about the Malay quatrain. The interactions among the subjects were taped and selected interactions related to the study were analyzed. The discourse analysis method was used to analyze the interactions. The results of the study revealed that the subjects would prefer the Malay quatrain which has the value of love among family members, friends and teachers. It is hoped that future research concentrates on the use the Malay quatrain with aesthetic values among children at primary schools.

  19. Technology-Facilitated Diagnosis and Treatment of Individuals with Autism Spectrum Disorder: An Engineering Perspective

    Directory of Open Access Journals (Sweden)

    Xiongyi Liu

    2017-10-01

    Full Text Available The rapid development of computer and robotic technologies in the last decade is giving hope to perform earlier and more accurate diagnoses of the Autism Spectrum Disorder (ASD, and more effective, consistent, and cost-conscious treatment. Besides the reduced cost, the main benefit of using technology to facilitate treatment is that stimuli produced during each session of the treatment can be controlled, which not only guarantees consistency across different sessions, but also makes it possible to focus on a single phenomenon, which is difficult even for a trained professional to perform, and deliver the stimuli according to the treatment plan. In this article, we provide a comprehensive review of research on recent technology-facilitated diagnosis and treat of children and adults with ASD. Different from existing reviews on this topic, which predominantly concern clinical issues, we focus on the engineering perspective of autism studies. All technology facilitated systems used for autism studies can be modeled as human machine interactive systems where one or more participants would constitute as the human component, and a computer-based or a robotic-based system would be the machine component. Based on this model, we organize our review with the following questions: (1 What are presented to the participants in the studies and how are the content and delivery methods enabled by technologies? (2 How are the reactions/inputs collected from the participants in response to the stimuli in the studies? (3 Are the experimental procedure and programs presented to participants dynamically adjustable based on the responses from the participants, and if so, how? and (4 How are the programs assessed?

  20. Solar technology assessment project. Volume 6: Photovoltaic technology assessment

    Science.gov (United States)

    Backus, C. E.

    1981-04-01

    Industrial production of photovoltaic systems and volume of sales are reviewed. Low cost silicon production techniques are reviewed, including the Czochralski process, heat exchange method, edge defined film fed growth, dentritic web growth, and silicon on ceramic process. Semicrystalline silicon, amorphous silicon, and low cost poly-silicon are discussed as well as advanced materials and concentrator systems. Balance of system components beyond those needed to manufacture the solar panels are included. Nontechnical factors are assessed. The 1986 system cost goals are briefly reviewed.

  1. Life Cycle Assessment of Slurry Management Technologies

    DEFF Research Database (Denmark)

    Wesnæs, Marianne; Wenzel, Henrik; Petersen, Bjørn Molt

    This report contains the results of Life Cycle Assessments of two slurry management technologies - acidification and decentred incineration. The LCA foundation can be used by the contributing companies for evaluating the environmental sustainability of a specific technology from a holistic Life...... Cycle perspective. Through this the companies can evaluate the environmental benefits and disadvantages of introducing a specific technology for slurry management. From a societal perspective the results can contribute to a clarification of which slurry management technologies (or combination...... of technologies) having the largest potential for reducing the overall environmental impacts....

  2. Human choice and climate change. Volume 1: The societal framework

    International Nuclear Information System (INIS)

    Raynor, S.; Malone, E.

    1998-01-01

    This book is Volume 1 of a four-volume set which assesses social science research that is relevant to global climate change from a wide-ranging interdisciplinary perspective. Attention is focused on the societal framework as it relates to climate change. This series is indispensable reading for scientists and engineers wishing to make an effective contribution to the climate change policy debate

  3. Applying RFID technology in the retail industry – benefits and concerns from the consumer’s perspective

    Directory of Open Access Journals (Sweden)

    Ádám Novotny

    2015-05-01

    Full Text Available This paper discusses the benefits and costs of RFID (Radio Frequency Identification technology in the retail sector. RFID is an enabling technology for the Internet of Things (IoT concept, which constitutes a new vision of the Internet as a medium and forum that expands into our everyday lives and connects us virtually to all of the objects that surround us. This paper gives a balanced view of RFID in retailing by showing its current and potential benefits and costs, in particular from the consumer’s perspective. The authors also present the findings of a survey that examined the attitudes of Hungarian consumers towards the potential threats of RFID, and conclude that these attitudes are part of a larger psychological construct, which embraces opinions and attitudes towards new information and communications technologies in general. Significant relationships between consumer demography and attitudes towards RFID applications were also revealed. The paper suggests a solution to the privacy problem of current RFID applications, which has been elaborated by researchers of the IoT Research Institute at the Eszterházy Károly College in Hungary: if RFID technology were integrated with NFC-enabled mobile phones that included a user interface, consumers would be able to gain control over radio frequency communication.

  4. Clean energy storage technology in the making: An innovation systems perspective on flywheel energy storage.

    Science.gov (United States)

    Wicki, Samuel; Hansen, Erik G

    2017-09-20

    The emergence and diffusion of green and sustainable technologies is full of obstacles and has therefore become an important area of research. We are interested in further understanding the dynamics between entrepreneurial experimentation, market formation, and institutional contexts, together playing a decisive role for successful diffusion of such technologies. Accordingly, we study these processes by adopting a technological innovation system perspective focusing on actors, networks, and institutions as well as the functions provided by them. Using a qualitative case study research design, we focus on the high-speed flywheel energy storage technology. As flywheels are based on a rotating mass allowing short-term storage of energy in kinetic form, they represent an environmentally-friendly alternative to electrochemical batteries and therefore can play an important role in sustainable energy transitions. Our contribution is threefold: First , regarding the flywheel energy storage technology, our findings reveal two subsystems and related markets in which development took different courses. In the automotive sector, flywheels are developing well as a braking energy recovery technology under the influence of two motors of innovation. In the electricity sector, they are stagnating at the stage of demonstration projects because of two important system weaknesses that counteract demand for storage. Second , we contribute to the theory of technological innovation systems by better understanding the internal dynamics between different functions of an innovation system as well as between the innovation system and its (external) contextual structures. Our third contribution is methodological. According to our best knowledge, we are the first to use system dynamics to (qualitatively) analyze and visualize dynamics between the diverse functions of innovation systems with the aim of enabling a better understanding of complex and iterative system processes. The paper also

  5. Industry perspective on digital upgrades: A utility perspective on digital upgrades

    International Nuclear Information System (INIS)

    Blauw, R.J.

    1994-01-01

    Nuclear utilities face the need to upgrade aging and obsolete safety related and other critical equipment. This is the result of operation and maintenance concerns for reliability and maintainability. Digital technology is an option for these upgrades. A number of utilities have attempted exercising the digital option. The regulatory licensing results have been inconsistent and have raised a variety of issues. These issues and the subsequent licensing uncertainties have caused some utilities to temporarily drop digital technology as an upgrade option. Resolution of these issues and the need for regulatory stability is driving the development of industry standards and guidelines. These will provide guidance to support consistent design and implementation of digital upgrades. Successful completion of these documents is necessary for renewed consideration of the use of digital technology. This paper will present a utility perspective on how project management, configuration control, and a rigorous design process can serve to address the present regulatory issues. These issues include commercial grade dedication, reliability, electromagnetic interference, and failure and error management. This perspective is consistent with the standards and guidelines development effort

  6. Solid-state lighting technology perspective.

    Energy Technology Data Exchange (ETDEWEB)

    Tsao, Jeffrey Yeenien; Coltrin, Michael Elliott

    2006-08-01

    Solid-State Lighting (SSL) uses inorganic light-emitting diodes (LEDs) and organic light-emitting diodes (OLEDs) to convert electricity into light for illumination. SSL has the potential for enormous energy savings and accompanying environmental benefits if its promise of 50% (or greater) energy efficiencies can be achieved. This report provides a broad summary of the technologies that underlie SSL. The applications for SSL and potential impact on U.S. and world-wide energy consumption, and impact on the human visual experience are discussed. The properties of visible light and different technical metrics to characterize its properties are summarized. The many factors contributing to the capital and operating costs for SSL and traditional lighting sources (incandescent, fluorescent, and high-intensity discharge lamps) are discussed, with extrapolations for future SSL goals. The technologies underlying LEDs and OLEDs are also described, including current and possible alternative future technologies and some of the present limitations.

  7. A State-of-the-Art Report on Technologies of Volume Reduction and Self-Disposal for Large Metal Wastes including the Steam Generator of Nuclear Power Plants

    International Nuclear Information System (INIS)

    Lee, Kune Woo; Choi, W. K.; Kim, G. Y.

    2009-06-01

    This report focuses on technologies of volume reduction and self-disposal for large metal wastes including the steam generator of nuclear power plants. This report consists of the cases of treatments and foreign and domestic technologies for steam generator replacement

  8. Part I.2: Perspectives on Technological Transformation

    DEFF Research Database (Denmark)

    Müller, Jens

    2003-01-01

    The article defines the technology concept as knowledge, organisation, technique and product, and describes the processes for technology analysis.......The article defines the technology concept as knowledge, organisation, technique and product, and describes the processes for technology analysis....

  9. Perspectives in Peer Programs. Volume 28, Number 1, Winter 2018

    Science.gov (United States)

    Tindall, Judith, Ed.; Black, David R., Ed.; Routson, Sue, Ed.

    2018-01-01

    This issue of "Perspectives in Peer Programs," the official journal of the National Association of Peer Program Professionals (NAPP), includes: (1) Introduction to this Issue on NAPPP Programmatic Standards Checklist, Programmatic Standards, Ethics, and Rubric; (2) NAPPP Programmatic Standards Checklist; (3) NAPPP Programmatic Standards;…

  10. Healthcare professionals' use of health clouds: Integrating technology acceptance and status quo bias perspectives.

    Science.gov (United States)

    Hsieh, Pi-Jung

    2015-07-01

    Cloud computing technology has recently been seen as an important milestone in medical informatics development. Despite its great potential, there are gaps in our understanding of how users evaluate change in relation to the health cloud and how they decide to resist it. Integrating technology acceptance and status quo bias perspectives, this study develops an integrated model to explain healthcare professionals' intention to use the health cloud service and their intention to resist it. A field survey was conducted in Taiwan to collect data from healthcare professionals; a structural equation model was used to examine the data. A valid sample of 209 healthcare professionals was collected for data analysis. The results show that healthcare professionals' resistance to the use of the health cloud is the result of regret avoidance, inertia, perceived value, switching costs, and perceived threat. Attitude, subjective norm, and perceived behavior control are shown to have positive and direct effects on healthcare professionals' intention to use the health cloud. The results also indicate a significant negative effect in the relationship between healthcare professionals' intention and resistance to using the health cloud. Our study illustrates the importance of incorporating user resistance in technology acceptance studies in general and in health technology usage studies in particular. This study also identifies key factors for practitioners and hospitals to make adoption decisions in relation to the health cloud. Further, the study provides a useful reference for future studies in this subject field. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  11. Technology Optimism in a Socio-Economic Perspective

    DEFF Research Database (Denmark)

    Røpke, Inge

    1996-01-01

    Abstract It is widely acknowledged that a great effort is necessary to cope with environmental problems. Focus is often upon technological change as the main way to achieve sustainability. But is it reasonable to place so much faith in technological change? The main dividing line between the opti......Abstract It is widely acknowledged that a great effort is necessary to cope with environmental problems. Focus is often upon technological change as the main way to achieve sustainability. But is it reasonable to place so much faith in technological change? The main dividing line between...... the optimistic and the critical view relates to the importance of distributional issues. First, an over-narrow focus upon technology diverts attention from the need to deal with distributional issues as an integral part of coping with environmental problems. Second, the technology optimists underestimate...... the need for changes in fundamental mechanisms, power structures and basic ideas as preconditions for influencing the direction of technological change. The paper deals with the state interventionist version of technology optimism, where it is emphasized that active industrial and technology policies...

  12. Patient safety trilogy: perspectives from clinical engineering.

    Science.gov (United States)

    Gieras, Izabella; Sherman, Paul; Minsent, Dennis

    2013-01-01

    This article examines the role a clinical engineering or healthcare technology management (HTM) department can play in promoting patient safety from three different perspectives: a community hospital, a national government health system, and an academic medical center. After a general overview, Izabella Gieras from Huntington Hospital in Pasadena, CA, leads off by examining the growing role of human factors in healthcare technology, and describing how her facility uses clinical simulations in medical equipment evaluations. A section by Paul Sherman follows, examining patient safety initiatives from the perspective of the Veterans Health Administration with a focus on hazard alerts and recalls. Dennis Minsent from Oregon Health & Science University writes about patient safety from an academic healthcare perspective, and details how clinical engineers can engage in multidisciplinary safety opportunities.

  13. Industrial Sector Technology Use Model (ISTUM): industrial energy use in the United States, 1974-2000. Volume 1. Primary model documentation. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bohn, Roger E.; Herod, J. Steven; Andrews, Gwen L.; Budzik, Philip M.; Eissenstat, Richard S.; Grossmann, John R.; Reiner, Gary M.; Roschke, Thomas E.; Shulman, Michael J.; Toppen, Timothy R.; Veno, William R.; Violette, Daniel M.; Smolinski, Michael D.; Habel, Deborah; Cook, Alvin E.

    1979-10-01

    ISTUM is designed to predict the commercial market penetration of various energy technologies in the industrial sector out to the year 2000. It is a refinement and further development of Market Oriented Program Planning Study task force in 1977. ISTUM assesses the comparative economic competitiveness of each technology and competes over 100 energy technologies - conventionals, fossil/energy, conservation, cogeneration, solar, and geothermal. A broad overview of the model, the solution of the model, and an in-depth discussion of strength and limitations of the model are provided in Volume I. (MCW)

  14. Social Class and Education: Global Perspectives

    Science.gov (United States)

    Weis, Lois, Ed.; Dolby, Nadine, Ed.

    2012-01-01

    "Social Class and Education: Global Perspectives" is the first empirically grounded volume to explore the intersections of class, social structure, opportunity, and education on a truly global scale. Fifteen essays from contributors representing the US, Europe, China, Latin America and other regions offer an unparralleled examination of…

  15. Part I.6: Perspectives on Technological Transformation

    DEFF Research Database (Denmark)

    Müller, Jens

    2003-01-01

    The article outlines the technological transfer processes and sums that the national systems of innovation function under highly contrasting institutional and technological settings.......The article outlines the technological transfer processes and sums that the national systems of innovation function under highly contrasting institutional and technological settings....

  16. Marine Transportation in Turkey and A Future Perspective

    Directory of Open Access Journals (Sweden)

    İsmet BALIK

    2015-11-01

    Full Text Available Maritime transportation is one of the indicator and determining sectors of state economies. It’s shaped in parallel with the economic structure of the coastal countries in increasing or decreasing volumes. Especially with a significant advantage in international trade, sea transport is increasingly been competitive with other modes of transport. Considering the geographic location of Turkey, evaluating from criticial perspectives and developing meaningful proposals for effective solutions to such issues as strenghtening the alternative routes in seaborne trade and privitazing the ports that are to make further technological investments will enable to take effective and proactive measures concerning the future of this industry. In this study, the existing and likely expansions in the structure of shipping industry both in Turkey and in the world have been examined. In this examination, certain secondary data sets, such as the relevant literature and the recent statistical data, have been used.

  17. Technology transfer and localization: A Framatome perspective

    International Nuclear Information System (INIS)

    Preneuf, R. de

    2000-01-01

    Localization and technology transfer have been important factors influencing the decision-making process in countries embarking on a nuclear power programme. It seems natural that relationships between donors and recipients of technology, beginning with sub-contracting, should evolve towards technology transfers and cooperation on an equal footing. France was both a receiver and a donor of technology transfer in the area of nuclear power. This paper describes the French experience in technology transfer and the lesson learned therefrom. (author)

  18. The multi-level perspective analysis: Indonesia geothermal energy transition study

    Science.gov (United States)

    Wisaksono, A.; Murphy, J.; Sharp, J. H.; Younger, P. L.

    2018-01-01

    The study adopts a multi-level perspective in technology transition to analyse how the transition process in the development of geothermal energy in Indonesia is able to compete against the incumbent fossil-fuelled energy sources. Three levels of multi-level perspective are socio-technical landscape (ST-landscape), socio-technical regime (ST-regime) and niche innovations in Indonesia geothermal development. The identification, mapping and analysis of the dynamic relationship between each level are the important pillars of the multi-level perspective framework. The analysis considers the set of rules, actors and controversies that may arise in the technological transition process. The identified geothermal resource risks are the basis of the emerging geothermal technological innovations in Indonesian geothermal. The analysis of this study reveals the transition pathway, which yields a forecast for the Indonesian geothermal technology transition in the form of scenarios and probable impacts.

  19. Heliophysics 3 Volume Set

    Science.gov (United States)

    Schrijver, Carolus J.; Siscoe, George L.

    2010-11-01

    Volume 1: Preface; 1. Prologue Carolus J. Schrijver and George L. Siscoe; 2. Introduction to heliophysics Thomas J. Bogdan; 3. Creation and destruction of magnetic field Matthias Rempel; 4. Magnetic field topology Dana W. Longcope; 5. Magnetic reconnection Terry G. Forbes; 6. Structures of the magnetic field Mark B. Moldwin, George L. Siscoe and Carolus J. Schrijver; 7. Turbulence in space plasmas Charles W. Smith; 8. The solar atmosphere Viggo H. Hansteen; 9. Stellar winds and magnetic fields Viggo H. Hansteen; 10. Fundamentals of planetary magnetospheres Vytenis M. Vasyliūnas; 11. Solar-wind magnetosphere coupling: an MHD perspective Frank R. Toffoletto and George L. Siscoe; 12. On the ionosphere and chromosphere Tim Fuller-Rowell and Carolus J. Schrijver; 13. Comparative planetary environments Frances Bagenal; Bibliography; Index. Volume 2: Preface; 1. Perspective on heliophysics George L. Siscoe and Carolus J. Schrijver; 2. Introduction to space storms and radiation Sten Odenwald; 3. In-situ detection of energetic particles George Gloeckler; 4. Radiative signatures of energetic particles Tim Bastian; 5. Observations of solar and stellar eruptions, flares, and jets Hugh Hudson; 6. Models of coronal mass ejections and flares Terry Forbes; 7. Shocks in heliophysics Merav Opher; 8. Particle acceleration in shocks Dietmar Krauss-Varban; 9. Energetic particle transport Joe Giacalone; 10. Energy conversion in planetary magnetospheres Vytenis Vasyliūnas; 11. Energization of trapped particles Janet Green; 12. Flares, CMEs, and atmospheric responses Tim Fuller-Rowell and Stanley C. Solomon; 13. Energetic particles and manned spaceflight 358 Stephen Guetersloh and Neal Zapp; 14. Energetic particles and technology Alan Tribble; Appendix I. Authors and editors; List of illustrations; List of tables; Bibliography; Index. Volume 3: Preface; 1. Interconnectedness in heliophysics Carolus J. Schrijver and George L. Siscoe; 2. Long-term evolution of magnetic activity of Sun

  20. Technology strategy as macro-actor

    DEFF Research Database (Denmark)

    Tryggestad, Kjell

    2003-01-01

    -human entities to the explanatory repertoire of strategy research, another line of inquiry is pursued. The performative perspective thus proposed, is inspired by the classical work of Von Clausewitz and the recent anthropology of science, technology and organizational identities. In the proposed perspective...... case account for how the strategic technology and the strategic collective emerge and co-produce each other as a macro-actor, only to become transformed in unexpected ways - as common technology and reflective human subjects.In the concluding section, it is argued that the humanity of the reflective...... outcomes, as providers of explanations and observations. The expression `technological strategy as macro-actor' summarizes these findings and the associated implications for research and practice....

  1. [Current status and potential perspectives in classical radiotherapy technology].

    Science.gov (United States)

    Dabić-Stanković, Kata M; Stanković, Jovan B; Radosević-Jelić, Ljiljana M

    2004-01-01

    After purchase of radiotherapy equipment in 2003, classic radiation therapy in Serbia will reach the highest world level. In order to define the highest standards in radiation technology, we analyzed the current status and potential perspectives of radiation therapy. An analysis of present situation in the USA, assumed as the most developed in the world, was done. Available data, collected in the last 3 years (equipment assortment, therapy modalities, workload and manpower) for 284 radiotherapy centers, out of potential 2050, were analyzed. Results were presented as crude percentage and matched to point current status. The analysis showed that CLINAC accelerators are the most popular (82.7%), as well as, ADAC (43.7%) and Focus (CMS) (27.4%) systems for therapy planning. Movement towards virtual simulation is evident (59.3%), although classic "simulation" is not fully eliminated from the radiotherapy chain. The most popular brachytherapy afterloader is Microselectron HDR (71%). About 64.4% centers use IMPAC communication/verification/record system that seems more open than Varis. All centers practice modern radiotherapy modalities and techniques (CPRT, IMRT, SRS/SRT, TBI, IORT, IVBHRT, HDR BHRT, etc.). CT and MRI availability is out of question, but PET is available in 3% of centers, however this percentage is rapidly growing. Up to 350 new patients per year are treated by one accelerator (about 35 pts. a day). Centers are relatively small and utilize 2-3 accelerators on average. Average FTE staffing norm is 4 radiation oncologists, 2-3 medical radiotherapy physicists, about 3 certified medical dosimetrists and about 6 radiotherapy technologists. In the past 5 years relative stagnation in classic radiotherapy has been observed. In spite of substantial investments in technology and consequent improvements, as well as wide introduction of computers in radiotherapy, radiotherapy results have not changed significantly. Vendor developement strategies do not point that

  2. Pyrolysis and gasification of waste: a worldwide technology and business review. Vol.1: Markets and trends; Vol. 2: Technologies and processes

    International Nuclear Information System (INIS)

    2000-01-01

    The two volume report, Pyrolysis and Gasification of Waste; a Worldwide Technology and Business Review, covers technology trends and market forces, applications and markets, market profiles by region, decision makers' preferences, and the market forecast for 1999 to 2008 in Volume I. Technologies and processes are addressed in Volume II, with technology concepts, analysis of the processes, a comparative review of selected processes examined. A directory of suppliers, process developers and licenses is provided in the appendices to Volume II. (UK)

  3. Mars power system concept definition study. Volume 2: Appendices

    Science.gov (United States)

    Littman, Franklin D.

    1994-01-01

    This report documents the work performed by Rockwell International's Rocketdyne Division on NASA Contract No. NAS3-25808 (Task Order No. 16) entitled 'Mars Power System Definition Study'. This work was performed for NASA's Lewis Research Center (LeRC). The report is divided into two volumes as follows: Volume 1 - Study Results; and Volume 2 - Appendices. The results of the power system characterization studies, operations studies, and technology evaluations are summarized in Volume 1. The appendices include complete, standalone technology development plans for each candidate power system that was investigated.

  4. Clean coal technology project to Polk Power Station, Tampa Electric Company, Florida, Volume 1: Report

    International Nuclear Information System (INIS)

    1994-06-01

    Tampa Electric Company proposes to construct and operate a 1,150-MW power station in southwestern Polk County, Florida. The proposed Polk Power Station would require an EPA NPDES permit for a new source and would include a 260-MW IGCC unit as a DOE Clean Coal Technology demonstration project. This EIS document assesses the proposed project and alternatives with respect to environmental impacts. Mitigative measures are also evaluated for the preferred alternative. Included in this Volume I are the following: alternatives including Tampa Electric Companies proposed project (preferred alternative with DOE financial assistance); affected environment; environmental consequences of the alternatives

  5. QuEST: Qualifying Environmentally Sustainable Technologies. Volume 2

    Science.gov (United States)

    Brown, Christina (Editor)

    2007-01-01

    TEERM focuses its validation efforts on technologies that have shown promise in laboratory testing, but lack testing under realistic or field environment. Mature technologies have advantages over those that are still in the developmental stage such as being more likely to be transitioned into a working environment. One way TEERM begins to evaluate the suitability of technologies is through Technology Readiness Levels (TRLs). TRLs are a systematic metric/measurement system that supports assessments of the maturity of a particular technology and the consistent comparison of maturity between different types of technology. TEERM generally works on demonstrating/validating alternatives that fall within TRLs 5-9. In instances where a mature technology does not exist for a particular Agency application, TEERM works with technology development groups and programs such as NASA's Innovative Partnerships Program (IPP). The IPP's purpose is to identify and document available technologies in light of NASA's needs, evaluate and prioritize those technologies, and reach out to find new partners. All TEERM projects involve multiple partners. Partnering reduces duplication of effort that otherwise might occur if individuals worked their problems alone. Partnering also helps reduce individual contributors' shares of the total cost of technology validation. Through collaboration and financial commitment from project stakeholders and third-party sources, it is possible to fully fund expensive demonstration/validation efforts.

  6. Human choice and climate change. Volume 4: What have we learned?

    International Nuclear Information System (INIS)

    Raynor, S.; Malone, E.

    1998-01-01

    This book is Volume 4 of a four-volume set which assesses social science research that is relevant to global climate change from a wide-ranging interdisciplinary perspective. Attention is focused on lessons learned as related to climate change. This series is indispensable reading for scientists and engineers wishing to make an effective contribution to the climate change policy debate

  7. Science and Technology vs. Defense and Security: Dual Use Consequences, a South American Perspective

    International Nuclear Information System (INIS)

    Espona, M. J.

    2007-01-01

    Nowadays we can say that science and technology are development driven forces in most countries, with some exceptions especially in the Southern Hemisphere. Even though, we have to take into account their link to and impact on defense and security and not only when it comes to WMD but also in the economy and academy areas, both in developed and developing countries. Within this framework, when we analyze the spread of technology and knowledge, it is important to consider: the media where it takes place (e.g. journals, internet, conferences, commercial agreements); which the actors involved are (e.g. scientists, governmental agencies, commercial firms); and the motive why it occurs (e.g. scientific discoveries; commercial exchange; international agreements). Once known all these elements, which vary both intracountry and intercountry, we may have a deep and broad enough framework to consider which policies to take in order to foster scientific and technologic development without collaborating with state and non state WMD programs. Although we already have a legal framework to fight against WMD proliferation and terrorism, the diverse degree of success of such instruments makes it necessary to continue analyzing and debating ways to strengthen them and/or find new ones. Therefore, in this paper we will analyze how the phenomena of science and technology development and spread impacts on defense and security from a South American perspective, taking into account the particular differences among developed and developing countries. Among the primary findings we can mention the existing differences between countries when it comes to the place (military, academic or commercial ones) where the critical science and technology innovative developments take place; the origin of funding (private or governmental); the existence and fulfillment of plans to foster science and technology development; and the scientific community awareness in WMD topics. All these elements have a

  8. Contemporary design and manufacturing technology

    CERN Document Server

    Wang, Taiyong; Zuo, Dunwen

    2013-01-01

    The special topic volume communicates the latest progress and research results of new theory, new technology, method, equipment and so on in Engineering Technology, and to grasp the updated technological and research trends in internationally. The major topics covered by the special volumes include Advanced Materials and Manufacturing Technologies, Control, Automation and Detection Systems, Advanced Design Technology, Optimization and Modeling. In 80 invited and peer-reviewed papers, mechanical and other engineers describe their recent and current research and results in advanced materials and

  9. Oak Ridge K-25 Site Technology Logic Diagram

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. (ed.)

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration (ER) and waste management (WN) problems at the Oak Ridge K-25 Site. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remediation, decontamination, and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This volume 3 B provides the Technology Evaluation Data Sheets (TEDS) for ER/WM activities (Remedial Action Robotics and Automation, Waste Management) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than each technology in Vol. 2. The TEDS are arranged alphanumerically by the TEDS code number in the upper right corner of each data sheet. Volume 3 can be used in two ways: (1) technologies that are identified from Vol. 2 can be referenced directly in Vol. 3 by using the TEDS codes, and (2) technologies and general technology areas (alternatives) can be located in the index in the front of this volume.

  10. CAREER AND WORK RELATIONS IN THE INFORMATION TECHNOLOGY SERVICE INDUSTRY: THE PERSPECTIVES OF IT PROFESSIONALS AND THEIR MANAGERS

    Directory of Open Access Journals (Sweden)

    Valter Moreno

    2010-01-01

    Full Text Available This study investigates work relations and career perspectives of IT professionals in the information technology service industry. The research is based on the case of executives, managers and technical professionals which work in a large Brazilian company that provides consulting and systems development and implementation services, and reveals a considerable vulnerability in the relationship between the company and such professionals. The human resources business model adopted seems to impose restrictions to the development of the professionals, consequently limiting their future performance, and concurring for the continuing devaluation of IT as a profession. The sustainability of such a model is discussed, given its long term risks for the companies’ service quality and competitiveness, as well as its implications for the attractiveness of Information Technology as a career.

  11. Technology Transfer: A Third World Perspective.

    Science.gov (United States)

    Akubue, Anthony I.

    2002-01-01

    Technology transfer models are based on assumptions that do not reflect Third-World realities. Obstacles to building indigenous technology capacity include multinational corporations' control of innovations, strings attached to foreign aid, and indigenous reluctance to undertake research. Four areas of development include foreign direct…

  12. Educational Technology: Integration?

    Science.gov (United States)

    Christensen, Dean L.; Tennyson, Robert D.

    This paper presents a perspective of the current state of technology-assisted instruction integrating computer language, artificial intelligence (AI), and a review of cognitive science applied to instruction. The following topics are briefly discussed: (1) the language of instructional technology, i.e., programming languages, including authoring…

  13. Mobile tethering: Overview, perspectives and challengess

    NARCIS (Netherlands)

    Constantinescu, M.; Onur, E.; Durmus, Y.; Nikou, S.; Reuver, M. de; Bouwman, H.; Djurica, M.; Glatz, P.M.

    2014-01-01

    Purpose: The purpose of this paper is to analyze mobile tethering from technological and social perspectives. Mobile tethering allows us to share cellular data connection with others over WiFi, Bluetooth or USB. Although the technology is ready and has promising outcomes, service providers and the

  14. Technology Integration and Technology Leadership in Schools as Learning Organizations

    Science.gov (United States)

    Cakir, Recep

    2012-01-01

    The purpose of this study was to investigate technology integration in primary schools from the perspective of leadership in learning organizations. To that end, the study examines two groups: school administrators who play effective roles in technology integration in schools and computer teachers who are mainly responsible for schools' technology…

  15. Development of a tripolar model of technology acceptance: Hospital-based physicians' perspective on EHR.

    Science.gov (United States)

    Beglaryan, Mher; Petrosyan, Varduhi; Bunker, Edward

    2017-06-01

    In health care, information technologies (IT) hold a promise to harness an ever-increasing flow of health related information and bring significant benefits including improved quality of care, efficiency, and cost containment. One of the main tools for collecting and utilizing health data is the Electronic Health Record (EHR). EHRs implementation can face numerous barriers to acceptance including attitudes and perceptions of potential users, required effort attributed to their implementation and usage, and resistance to change. Various theories explicate different aspects of technology deployment, implementation, and acceptance. One of the common theories is the Technology Acceptance Model (TAM), which helps to study the implementation of different healthcare IT applications. The objectives of this study are: to understand the barriers of EHR implementation from the perspective of physicians; to identify major determinants of physicians' acceptance of technology; and develop a model that explains better how EHRs (and technologies in general) are accepted by physicians. The proposed model derives from a cross-sectional survey of physicians selected through multi-stage cluster sampling from the hospitals of Yerevan, Armenia. The study team designed the survey instrument based on a literature review on barriers of EHR implementation. The analysis employed exploratory structural equation modeling (ESEM) with a robust weighted least squares (WLSMV) estimator for categorical indicators. The analysis progressed in two steps: appraisal of the measurement model and testing of the structural model. The derived model identifies the following factors as direct determinants of behavioral intention to use a novel technology: projected collective usefulness; personal innovativeness; patient influence; and resistance to change. Other factors (e.g., organizational change, professional relationships, administrative monitoring, organizational support and computer anxiety) exert their

  16. Social robots from a human perspective

    CERN Document Server

    Taipale, Sakari; Sapio, Bartolomeo; Lugano, Giuseppe; Fortunati, Leopoldina

    2015-01-01

    Addressing several issues that explore the human side of social robots, this book asks from a social and human scientific perspective what a social robot is and how we might come to think about social robots in the different areas of everyday life. Organized around three sections that deal with Perceptions and Attitudes to Social Robots, Human Interaction with Social Robots, and Social Robots in Everyday Life, the book explores the idea that even if technical problems related to robot technologies can be continuously solved from a machine perspective, what kind of machine do we want to have and use in our daily lives? Experiences from previously widely adopted technologies, such smartphones, hint that robot technologies could potentially be absorbed into the everyday lives of humans in such a way that it is the human that determines the human-machine interaction. In a similar way to how today’s information and communication technologies were first designed for professional/industrial use, but which soon wer...

  17. Integrated Model of Balanced Score Card and Technology Component Measurement: A Strategic Perspective in Indonesia Biofuel Engineering Development

    Directory of Open Access Journals (Sweden)

    Sukardi Sukardi

    2010-08-01

    Full Text Available The development of biofuel as an ecofriendly energy alternative has a value chain problem in alignment policies between related parties. Identifiying its alignment, we make a strategic mapping by building integrated base scorecard, so the strategic target in the subsequent perspective layer can be developed more realistically. Structural Equation Modeling (SEM modeling was used to examine horizontal connection validity to show strong relation between objectives strategy, and it will be measured of constructed component on the internal process by Technology Coefficient Contribution indexes.

  18. Health risks in perspective: Judging health risks of energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Rowe, M.D.

    1992-09-18

    Almost daily, Americans receive reports from the mass news media about some new and frightening risk to health and welfare. Most such reports emphasize the newsworthiness of the risks -- the possibility of a crisis, disagreements among experts, how things happened, who is responsible for fixing them, how much will it cost, conflict among parties involved, etc. As a rule, the magnitudes of the risks, or the difficulty of estimating those magnitudes, have limited newsworthiness, and so they are not mentioned. Because of this emphasis in the news media, most people outside the risk assessment community must judge the relative significance of the various risks to which we all are exposed with only that information deemed newsworthy by reporters. This information is biased and shows risks in isolation. There is no basis for understanding and comparing the relative importance of risks among themselves, or for comparing one risk, perhaps a new or newly-discovered one, in the field of all risks. The purpose of this report is to provide perspective on the various risks to which we are routinely exposed. It serves as a basis for understanding the meaning of quantitative risk estimates and for comparing new or newly-discovered risks with other, better-understood risks. Specific emphasis is placed on health risks of energy technologies.

  19. Technology of high-level nuclear waste disposal. Advances in the science and engineering of the management of high-level nuclear wastes. Volume 1

    International Nuclear Information System (INIS)

    Hofmann, P.L.; Breslin, J.J.

    1981-01-01

    The papers in this volume cover the following subjects: waste isolation and the natural geohydrologic system; repository perturbations of the natural system; radionuclide migration through the natural system; and repository design technology. Individual papers are abstracted

  20. Technology of high-level nuclear waste disposal. Advances in the science and engineering of the management of high-level nuclear wastes. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, P.L.; Breslin, J.J. (eds.)

    1981-01-01

    The papers in this volume cover the following subjects: waste isolation and the natural geohydrologic system; repository perturbations of the natural system; radionuclide migration through the natural system; and repository design technology. Individual papers are abstracted.

  1. Implementing a Swedish regionalized medical program supported by digital technologies: possibilities and challenges from a management perspective.

    Science.gov (United States)

    Pettersson, Fanny L M

    2013-01-01

    In 2011, Umeå University in Sweden was facing its first attempt to transform the existing medical program into a regionalized medical program (RMP), supported by the use of digital technologies. The Swedish RMP means that students are distributed in geographically separated groups while doing their five clinical clerkship semesters. To provide medical students with ways of undertaking their theoretical studies when geographically distributed, digital technologies are used for educational and administrative purposes. In this article, the Swedish RMP will be described and related to previous international research on educating medical students in rural settings. The aim of this article was, from a management perspective, to understand if and how contradictions arise during the implementation process of the Swedish RMP, supported by digital technologies. Based on this analysis, a further aim was to discuss, from a management perspective, the possibilities and challenges for improvement of this medical educational practice, as well as to provide implications for other similar changes in medical programs internationally. To identify possible contradictions during the implementation process, ethnographically inspired observations were made during management work meetings, before and during the first regionalized semester. In addition, in-depth follow-up interviews were held in May and June 2011 with six management executives of the Swedish RMP, concerning their expectations and experiences of the implementation process. The qualitative and activity theory (AT)-inspired analysis resulted in the emergence of two main themes and seven sub-themes. The analysis suggests that a number of contradictions arose during the implementation process of the Swedish RMP. For instance, a contradiction constituted as a conflict between the university management and some teachers concerning how digital technologies and technology enhanced learning (TEL) could and should be used when

  2. Photogrammetry and Laser Imagery Tests for Tank Waste Volume Estimates: Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Field, Jim G. [Washington River Protection Solutions, LLC, Richland, WA (United States)

    2013-03-27

    Feasibility tests were conducted using photogrammetry and laser technologies to estimate the volume of waste in a tank. These technologies were compared with video Camera/CAD Modeling System (CCMS) estimates; the current method used for post-retrieval waste volume estimates. This report summarizes test results and presents recommendations for further development and deployment of technologies to provide more accurate and faster waste volume estimates in support of tank retrieval and closure.

  3. Photogrammetry and Laser Imagery Tests for Tank Waste Volume Estimates: Summary Report

    International Nuclear Information System (INIS)

    Field, Jim G.

    2013-01-01

    Feasibility tests were conducted using photogrammetry and laser technologies to estimate the volume of waste in a tank. These technologies were compared with video Camera/CAD Modeling System (CCMS) estimates; the current method used for post-retrieval waste volume estimates. This report summarizes test results and presents recommendations for further development and deployment of technologies to provide more accurate and faster waste volume estimates in support of tank retrieval and closure

  4. Oak Ridge K-25 Site Technology Logic Diagram

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. (ed.)

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates envirorunental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. This volume, Volume 2, contains logic diagrams with an index. Volume 3 has been divided into two separate volumes to facilitate handling and use.

  5. High-performance technology for indexing of high volumes of Earth remote sensing data

    Science.gov (United States)

    Strotov, Valery V.; Taganov, Alexander I.; Kolesenkov, Aleksandr N.; Kostrov, Boris V.

    2017-10-01

    The present paper has suggested a technology for search, indexing, cataloging and distribution of aerospace images on the basis of geo-information approach, cluster and spectral analysis. It has considered information and algorithmic support of the system. Functional circuit of the system and structure of the geographical data base have been developed on the basis of the geographical online portal technology. Taking into account heterogeneity of information obtained from various sources it is reasonable to apply a geoinformation platform that allows analyzing space location of objects and territories and executing complex processing of information. Geoinformation platform is based on cartographic fundamentals with the uniform coordinate system, the geographical data base, a set of algorithms and program modules for execution of various tasks. The technology for adding by particular users and companies of images taken by means of professional and amateur devices and also processed by various software tools to the array system has been suggested. Complex usage of visual and instrumental approaches allows significantly expanding an application area of Earth remote sensing data. Development and implementation of new algorithms based on the complex usage of new methods for processing of structured and unstructured data of high volumes will increase periodicity and rate of data updating. The paper has shown that application of original algorithms for search, indexing and cataloging of aerospace images will provide an easy access to information spread by hundreds of suppliers and allow increasing an access rate to aerospace images up to 5 times in comparison with current analogues.

  6. Surgeons' Perspectives on Premium Implants in Total Joint Arthroplasty.

    Science.gov (United States)

    Wasterlain, Amy S; Bello, Ricardo J; Vigdorchik, Jonathan; Schwarzkopf, Ran; Long, William J

    2017-09-01

    Declining total joint arthroplasty reimbursement and rising implant prices have led many hospitals to restrict access to newer, more expensive total joint arthroplasty implants. The authors sought to understand arthroplasty surgeons' perspectives on implants regarding innovation, product launch, costs, and cost-containment strategies including surgeon gain-sharing and patient cost-sharing. Members of the International Congress for Joint Reconstruction were surveyed regarding attitudes about implant technology and costs. Descriptive and univariate analyses were performed. A total of 126 surgeons responded from all 5 regions of the United States. Although 76.9% believed new products advance technology in orthopedics, most (66.7%) supported informing patients that new implants lack long-term clinical data and restricting new implants to a small number of investigators prior to widespread market launch. The survey revealed that 66.7% would forgo gain-sharing incentives in exchange for more freedom to choose implants. Further, 76.9% believed that patients should be allowed to pay incremental costs for "premium" implants. Surgeons who believed that premium products advance orthopedic technology were more willing to forgo gain-sharing (P=.040). Surgeons with higher surgical volume (P=.007), those who believed implant companies should be allowed to charge more for new technology (Pnew implants with patients. Many surgeons support alternative payment models permitting surgeons and patients to retain implant selection autonomy. Most respondents prioritized patient beneficence and surgeon autonomy above personal financial gain. [Orthopedics. 2017; 40(5):e825-e830.]. Copyright 2017, SLACK Incorporated.

  7. Investigative Journalism: global perspectives

    OpenAIRE

    Price, Stuart

    2017-01-01

    This volume contains the work of nine members or associates of the Media Discourse Group. Investigative Journalism: Global Perspectives presents a theoretical and practical guide to contemporary international investigative journalism to outline principles of modern investigative work in the digital world. A diverse range of contributions from academics, journalists, and activists interrogate wide ranging issues such as state power, freedom of speech and social justice, as well as exploring...

  8. Large Deployable Reflector (LDR) system concept and technology definition study. Volume 1: Executive summary, analyses and trades, and system concepts

    Science.gov (United States)

    Agnew, Donald L.; Jones, Peter A.

    1989-01-01

    A study was conducted to define reasonable and representative large deployable reflector (LDR) system concepts for the purpose of defining a technology development program aimed at providing the requisite technological capability necessary to start LDR development by the end of 1991. This volume includes the executive summary for the total study, a report of thirteen system analysis and trades tasks (optical configuration, aperture size, reflector material, segmented mirror, optical subsystem, thermal, pointing and control, transportation to orbit, structures, contamination control, orbital parameters, orbital environment, and spacecraft functions), and descriptions of three selected LDR system concepts. Supporting information is contained in appendices.

  9. Understanding the build-up of a technological innovation system around hydrogen and fuel cell technologies

    NARCIS (Netherlands)

    Suurs, R.A.A.; Hekkert, M.P.; Smits, R.E.H.M.

    2009-01-01

    This study provides insight into the development of hydrogen and fuel cell technologies in the Netherlands (1980-2007). This is done by applying a Technological Innovation System (TIS) approach. This approach takes the perspective that a technology is shaped by a surrounding network of actors,

  10. Early Childhood Technology Education: A Sociocultural Perspective

    Science.gov (United States)

    Siu, Kin Wai Michael; Lam, Mei Seung

    2005-01-01

    We are living in a fast-changing, technology-driven world, where technology affects the daily lives of every person, directly or indirectly. While the importance of providing young children with technological knowledge and experience has been well-recognized, how the curriculum should be developed deserves greater study. Using early childhood…

  11. Ecological Perspectives in HCI

    DEFF Research Database (Denmark)

    Blevis, Eli; Bødker, Susanne; Flach, John

    The aim of the workshop is to provide a forum for researchers and practitioners to discuss the present and future of ecological perspectives in HCI. The participants will reflect on the current uses and interpretations of “ecology” and related concepts in the field. The workshop will assess the p...... the potential of ecological perspectives in HCI for supporting rich and meaningful analysis, as well as innovative design, of interactive technologies in real-life contexts......The aim of the workshop is to provide a forum for researchers and practitioners to discuss the present and future of ecological perspectives in HCI. The participants will reflect on the current uses and interpretations of “ecology” and related concepts in the field. The workshop will assess...

  12. Proceedings of waste stream minimization and utilization innovative concepts: An experimental technology exchange. Volume 1, Industrial solid waste processing municipal waste reduction/recycling

    Energy Technology Data Exchange (ETDEWEB)

    Lee, V.E. [ed.; Watts, R.L.

    1993-04-01

    This two-volume proceedings summarizes the results of fifteen innovations that were funded through the US Department of Energy`s Innovative Concept Program. The fifteen innovations were presented at the sixth Innovative Concepts Fair, held in Austin, Texas, on April 22--23, 1993. The concepts in this year`s fair address innovations that can substantially reduce or use waste streams. Each paper describes the need for the proposed concept, the concept being proposed, and the concept`s economics and market potential, key experimental results, and future development needs. The papers are divided into two volumes: Volume 1 addresses innovations for industrial solid waste processing and municipal waste reduction/recycling, and Volume 2 addresses industrial liquid waste processing and industrial gaseous waste processing. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  13. Oak Ridge K-25 Site Technology Logic Diagram

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. (ed.)

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This report is part A of Volume 3 concerning characterization, decontamination, and dismantlement.

  14. Dosimetry of internal emitting: principles and perspectives of the MIRD technology

    International Nuclear Information System (INIS)

    Ferro F, G.

    1999-01-01

    The development of the radiopharmaceutical technology have multiplied the number of radioisotopes with applications in therapeutical nuclear medicine so known as Directed radiotherapy. Assuming the radiation is capable to produce noxious effects in the biological systems, it is important to evaluate appropriately the risks and benefits of the administration of radioactive agents in the patient. The outstanding parameter in this evaluation is the absorbed dose, which is product of the radiation emitted by a radionuclide that is localized or distributed to the interior of the human body in study and whose its estimation helps to predict the efficacy of the treatment. The scheme generalized of MIRD, it was formulated from thirty years ago for evaluating the interior dosimetry at level of organs.The finality of this work is to show the basic principles of the MIRD methodology and its perspectives using innovator tools as the dosimetry for dynamic masses, in particular the personnel dosimetry for the organs of each patient, the dosimetry for the small structures inside the organs (sub organic dosimetry), the distributions of doses in three dimensions (S voxel), the dosimetry at cellular level and the quantitative acquisition of pharmaceutical data. (Author)

  15. Interdisciplinary technology assessment of service robots: the psychological/work science perspective.

    Science.gov (United States)

    Fischer, Martin

    2012-12-01

    The article sheds light on psychological and work science aspects of the design and utilization of service robots. An initial presentation of the characteristics of man-robot interaction is followed by a discussion of the principles of the division of functions between human beings and robots in service area work systems. The following aspects are to be considered: (1) the organisation of societal work (such as the different employment and professional profiles of service employees), (2) the work tasks to be performed by humans and robots (such as handling, monitoring or decision-making tasks), (3) the possibilities and the limitations of realizing such tasks by means of information technology (depending, for example, on the motoric capabilities, perception and cognition of the robot). Consideration of these three design perspectives gives rise to criteria of usability. Current debate focuses on the (work science) principles of man-machine communication, though in future these should be supplemented with robot-specific criteria such as "motoric capabilities" or "relationship quality." The article concludes by advocating the convergence and combination of work science criteria with ideas drawn from participative design approaches in the development and utilization of service robots.

  16. An Independent Scientific Assessment of Well Stimulation in California Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Long, Jane C.S. [California Council on Science and Technology, Sacramento, CA (United States); Feinstein, Laura C. [California Council on Science and Technology, Sacramento, CA (United States); Bachmann, Corinne E. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Birkholzer, Jens T. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Camarillo, Mary Kay [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Domen, Jeremy K. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Foxall, William [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Houseworth, James [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jin, Ling [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jordan, Preston D. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Maddalena, Randy L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McKone, Thomas E. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Millstein, Dev E. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Reagan, Matthew T. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sandelin, Whitney L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Stringfellow, William T. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Varadharajan, Charuleka [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cooley, Heather [Pacific Inst., Oakland, CA (United States); Donnelly, Kristina [Pacific Inst., Oakland, CA (United States); Heberger, Matthew G. [Pacific Inst., Oakland, CA (United States); Hays, Jake [PSE Healthy Energy, Berkeley, CA (United States); Shonkoff, Seth B.C. [PSE Healthy Energy, Berkeley, CA (United States); Brandt, Adam [Stanford Univ., CA (United States); Englander, Jacob G. [Stanford Univ., CA (United States); Hamdoun, Amro [Univ. of California of San Diego, La Jolla, CA (United States); Nicklisch, Sascha C.T. [Univ. of California of San Diego, La Jolla, CA (United States); Harrison, Robert J. [Univ. of California, San Francisco, CA (United States); Wettstein, Zachary S. [Univ. of California, San Francisco, CA (United States); Banbury, Jenner [California State Univ. Stanislaus, Turlock, CA (United States); Cypher, Brian L. [California State Univ. Stanislaus, Turlock, CA (United States); Phillips, Scott E. [California State Univ. Stanislaus, Turlock, CA (United States)

    2015-07-01

    This study is issued in three volumes. Volume I, issued in January 2015, describes how well stimulation technologies work, how and where operators deploy these technologies for oil and gas production in California, and where they might enable production in the future. Volume II, the present volume, discusses how well stimulation could affect water, atmosphere, seismic activity, wildlife and vegetation, and human health. Volume II reviews available data, and identifies knowledge gaps and alternative practices that could avoid or mitigate these possible impacts. Volume III, also issued in July 2015, presents case studies that assess environmental issues and qualitative risks for specific geographic regions. A final Summary Report summarizes key findings, conclusions and recommendations of all three volumes.

  17. An Independent Scientific Assessment of Well Stimulation in California Volume III

    Energy Technology Data Exchange (ETDEWEB)

    Long, Jane C.S. [California Council on Science and Technology, Sacramento, CA (United States); Feinstein, Laura C. [California Council on Science and Technology, Sacramento, CA (United States); Birkholzer, Jens [California Council on Science and Technology, Sacramento, CA (United States); Foxall, William [California Council on Science and Technology, Sacramento, CA (United States); Houseworth, James [California Council on Science and Technology, Sacramento, CA (United States); Jordan, Preston [California Council on Science and Technology, Sacramento, CA (United States); Lindsey, Nathaniel [California Council on Science and Technology, Sacramento, CA (United States); Maddalena, Randy [California Council on Science and Technology, Sacramento, CA (United States); McKone, Thomas [California Council on Science and Technology, Sacramento, CA (United States); Stringfellow, William [California Council on Science and Technology, Sacramento, CA (United States); Ulrich, Craig [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Heberger, Matthew [Pacific Inst., Oakland, CA (United States); Shonkoff, Seth [PSE Healthy Energy, Berkeley, CA (United States); Brandt, Adam [Stanford Univ., CA (United States); Ferrar, Kyle [The FracTracker Alliance, Oakland, CA (United States); Gautier, Donald [DonGautier LLC., Palo Alto, CA (United States); Phillips, Scott [California State Univ. Stanislaus, Turlock, CA (United States); Greenfield, Ben [Univ. of California, Berkeley, CA (United States); Jerrett, Michael L.B. [Univ. of California, Los Angeles, CA (United States)

    2015-07-01

    This study is issued in three volumes. Volume I, issued in January 2015, describes how well stimulation technologies work, how and where operators deploy these technologies for oil and gas production in California, and where they might enable production in the future. Volume II, issued in July 2015, discusses how well stimulation could affect water, atmosphere, seismic activity, wildlife and vegetation, and human health. Volume II reviews available data, and identifies knowledge gaps and alternative practices that could avoid or mitigate these possible impacts. Volume III, this volume, presents case studies that assess environmental issues and qualitative risks for specific geographic regions. The Summary Report summarizes key findings, conclusions and recommendations of all three volumes.

  18. Concrete Poetry as Sign of Technological Changes in Society

    DEFF Research Database (Denmark)

    Ørum, Tania

    2016-01-01

    This case deals with the large cultural perspectives and the technological imagination evident in the Swedish critic Torsten Ekbom's review of Danish concrete poetry......This case deals with the large cultural perspectives and the technological imagination evident in the Swedish critic Torsten Ekbom's review of Danish concrete poetry...

  19. Technology-Enhanced Formative Assessment: A Research-Based Pedagogy for Teaching Science with Classroom Response Technology

    Science.gov (United States)

    Beatty, Ian D.; Gerace, William J.

    2009-01-01

    "Classroom response systems" (CRSs) are a promising instructional technology, but most literature on CRS use fails to distinguish between technology and pedagogy, to define and justify a pedagogical perspective, or to discriminate between pedagogies. "Technology-enhanced formative assessment" (TEFA) is our pedagogy for CRS-based science…

  20. Lung Volume Reduction in Pulmonary Emphysema from the Radiologist's Perspective.

    Science.gov (United States)

    Doellinger, F; Huebner, R H; Kuhnigk, J M; Poellinger, A

    2015-08-01

    Pulmonary emphysema causes decrease in lung function due to irreversible dilatation of intrapulmonary air spaces, which is linked to high morbidity and mortality. Lung volume reduction (LVR) is an invasive therapeutical option for pulmonary emphysema in order to improve ventilation mechanics. LVR can be carried out by lung resection surgery or different minimally invasive endoscopical procedures. All LVR-options require mandatory preinterventional evaluation to detect hyperinflated dysfunctional lung areas as target structures for treatment. Quantitative computed tomography can determine the volume percentage of emphysematous lung and its topographical distribution based on the lung's radiodensity. Modern techniques allow for lobebased quantification that facilitates treatment planning. Clinical tests still play the most important role in post-interventional therapy monitoring, but CT is crucial in the detection of postoperative complications and foreshadows the method's high potential in sophisticated experimental studies. Within the last ten years, LVR with endobronchial valves has become an extensively researched minimally-invasive treatment option. However, this therapy is considerably complicated by the frequent occurrence of functional interlobar shunts. The presence of "collateral ventilation" has to be ruled out prior to valve implantations, as the presence of these extraanatomical connections between different lobes may jeopardize the success of therapy. Recent experimental studies evaluated the automatic detection of incomplete lobar fissures from CT scans, because they are considered to be a predictor for the existence of shunts. To date, these methods are yet to show acceptable results. Today, surgical and various minimal invasive methods of lung volume reduction are in use. Radiological and nuclear medical examinations are helpful in the evaluation of an appropriate lung area. Imaging can detect periinterventional complications. Reduction of lung

  1. Strategies for fuel cell product development. Developing fuel cell products in the technology supply chain

    International Nuclear Information System (INIS)

    Hellman, H.L.

    2004-01-01

    Due to the high cost of research and development and the broad spectrum of knowledge and competences required to develop fuel cell products, many product-developing firms outsource fuel cell technology, either partly or completely. This article addresses the inter-firm process of fuel cell product development from an Industrial Design Engineering perspective. The fuel cell product development can currently be characterised by a high degree of economic and technical uncertainty. Regarding the technology uncertainty: product-developing firms are more often then not unfamiliar with fuel cell technology technology. Yet there is a high interface complexity between the technology supplied and the product in which it is to be incorporated. In this paper the information exchange in three current fuel cell product development projects is analysed to determine the information required by a product designer to develop a fuel cell product. Technology transfer literature suggests that transfer effectiveness is greatest when the type of technology (technology uncertainty) and the type of relationship between the technology supplier and the recipient are carefully matched. In this line of thinking this paper proposes that the information required by a designer, determined by the design strategy and product/system volume, should be met by an appropriate level of communication interactivity with a technology specialist. (author)

  2. Technology assessment for the anesthesiologist.

    Science.gov (United States)

    Abenstein, J P

    2006-12-01

    The expense associated with modern heath care in the United States is very high, in excess of 15% of the GDP, continues to grow and has become a significant public policy issue. New technologies, defined as all drugs, devices, procedures, and organizational systems, are major contributors to rising health care costs. The use of health technology assessment tools can assist those in leadership positions in making rational decisions as to which new technologies to adopt. The classical approach is to use data from prospective, randomized, clinical trials that compare the outcomes of those treated with the new technology and the accepted therapy. Using this information and detailed economic data, the cost-effectiveness ratio can be determined. The accepted metrics are either dollars per life year saved or dollars per quality-adjusted life year saved. If the new medical intervention costs less than $50,000 to 80,000 dollars per life year saved, it is considered to be cost-effective and worthy of adoption. This kind of analysis is complex and expensive. In addition, the required information is not always available, limiting the applicability of this approach. Finally, the economic analysis often includes down-stream expense and benefit not relevant from a medical center perspective. Another approach is to focus the analysis to what impacts the medical center. This includes determining whether the technology has received the necessary approvals and has been shown to be effective, to improve health outcomes, to be at least as effective as standard therapy, and to be achievable outside the investigative setting. A fiscal analysis also must be done to determine what will it cost to acquire and operate the technology, what are the anticipated patient volumes and payer mix, and what will be the down-stream consequences to the medical center. If the process concludes that the technology works, makes a positive difference to patient care, and is fiscally and operationally

  3. 7th Annual Science and Engineering Technology Conference/DoD Technology Exposition Volume 1

    Science.gov (United States)

    2006-04-20

    Disruptive Technologies • Army Approach to Disruptive Technologies and Transition Mr. Dennis Schmidt, Director, Science & Technology Integration, Office of...the Assistant Secretary of the Army for Research and Technology • Navy Approach to Disruptive Technologies and Transition Mr. Lewis DeSandre, Program...Manager, ONR 351 • Air Force Approach to Disruptive Technologies and Transition Colonel Mark Stephen, Associate Deputy Assistant Secretary (Science

  4. Heliophysics 3 Volume Paperback Set

    Science.gov (United States)

    Schrijver, Carolus J.; Siscoe, George L.

    2013-03-01

    Volume 1: Preface; 1. Prologue Carolus J. Schrijver and George L. Siscoe; 2. Introduction to heliophysics Thomas J. Bogdan; 3. Creation and destruction of magnetic field Matthias Rempel; 4. Magnetic field topology Dana W. Longcope; 5. Magnetic reconnection Terry G. Forbes; 6. Structures of the magnetic field Mark B. Moldwin, George L. Siscoe and Carolus J. Schrijver; 7. Turbulence in space plasmas Charles W. Smith; 8. The solar atmosphere Viggo H. Hansteen; 9. Stellar winds and magnetic fields Viggo H. Hansteen; 10. Fundamentals of planetary magnetospheres Vytenis M. Vasyliunas; 11. Solar-wind magnetosphere coupling: an MHD perspective Frank R. Toffoletto and George L. Siscoe; 12. On the ionosphere and chromosphere Tim Fuller-Rowell and Carolus J. Schrijver; 13. Comparative planetary environments Frances Bagenal; Bibliography; Index. Volume 2: Preface; 1. Perspective on heliophysics George L. Siscoe and Carolus J. Schrijver; 2. Introduction to space storms and radiation Sten Odenwald; 3. In-situ detection of energetic particles George Gloeckler; 4. Radiative signatures of energetic particles Tim Bastian; 5. Observations of solar and stellar eruptions, flares, and jets Hugh Hudson; 6. Models of coronal mass ejections and flares Terry Forbes; 7. Shocks in heliophysics Merav Opher; 8. Particle acceleration in shocks Dietmar Krauss-Varban; 9. Energetic particle transport Joe Giacalone; 10. Energy conversion in planetary magnetospheres Vytenis Vasyliunas; 11. Energization of trapped particles Janet Green; 12. Flares, CMEs, and atmospheric responses Tim Fuller-Rowell and Stanley C. Solomon; 13. Energetic particles and manned spaceflight Stephen Guetersloh and Neal Zapp; 14. Energetic particles and technology Alan Tribble; Appendix I. Authors and editors; List of illustrations; List of tables; Bibliography; Index. Volume 3: Preface; 1. Interconnectedness in heliophysics Carolus J. Schrijver and George L. Siscoe; 2. Long-term evolution of magnetic activity of Sun

  5. Global Education: What the Research Shows. Information Capsule. Volume 0604

    Science.gov (United States)

    Blazer, Christie

    2006-01-01

    Teaching from a global perspective is important because the lives of people around the world are increasingly interconnected through politics, economics, technology, and the environment. Global education teaches students to understand and appreciate people from different cultural backgrounds; view events from a variety of perspectives; recognize…

  6. Arctic tipping points in an Earth system perspective.

    Science.gov (United States)

    Wassmann, Paul; Lenton, Timothy M

    2012-02-01

    We provide an introduction to the volume The Arctic in the Earth System perspective: the role of tipping points. The terms tipping point and tipping element are described and their role in current science, general debates, and the Arctic are elucidated. From a wider perspective, the volume focuses upon the role of humans in the Arctic component of the Earth system and in particular the envelope for human existence, the Arctic ecosystems. The Arctic climate tipping elements, the tipping elements in Arctic ecosystems and societies, and the challenges of governance and anticipation are illuminated through short summaries of eight publications that derive from the Arctic Frontiers conference in 2011 and the EU FP7 project Arctic Tipping Points. Then some ideas based upon resilience thinking are developed to show how wise system management could ease pressures on Arctic systems in order to keep them away from tipping points.

  7. State of the Art for Deep Brain Stimulation Therapy in Movement Disorders: A Clinical and Technological Perspective.

    Science.gov (United States)

    Wagle Shukla, Aparna; Okun, Michael S

    2016-01-01

    Deep brain stimulation (DBS) therapy is a widely used brain surgery that can be applied for many neurological and psychiatric disorders. DBS is American Food and Drug Administration approved for medication refractory Parkinson's disease, essential tremor and dystonia. Although DBS has shown consistent success in many clinical trials, the therapy has limitations and there are well-recognized complications. Thus, only carefully selected patients are ideal candidates for this surgery. Over the last two decades, there have been significant advances in clinical knowledge on DBS. In addition, the surgical techniques and technology related to DBS has been rapidly evolving. The goal of this review is to describe the current status of DBS in the context of movement disorders, outline the mechanisms of action for DBS in brief, discuss the standard surgical and imaging techniques, discuss the patient selection and clinical outcomes in each of the movement disorders, and finally, introduce the recent advancements from a clinical and technological perspective.

  8. Analysis concerning the perspective of Romania-USA technological cooperation with a view to performing TRIGA reactor project

    International Nuclear Information System (INIS)

    Ciocanescu, M.; Ionescu, M.; Constantin, L.

    1998-01-01

    The co-operation between Romania and the USA in the field of technologic transfer of nuclear research reactor technology began with the steady state 14 MW, TRIGA reactor, installed at INR Pitesti, Romania. It is the first in the range of TRIGA reactors proposed as a materials testing reactor. The first criticality was reached in November 19, 1979 and first operation at 14 MW, level was in February 1980. The paper will present the short history of this co-operation and the perspective for a new co-operation for building a Nuclear Heating Plant using the TRIGA reactor concept for demonstration purpose. The energy crisis is a world-wide problem which affects each country in different ways because the resources and the consumption are unfairly distributed. World-wide research points out that the fossil fuel sources are not to be considered the main energy sources for the long term as they are limited. (author)

  9. OCT in the field of laryngology: further perspectives

    Science.gov (United States)

    Just, T.; Pau, H. W.; Lankenau, E.; Hüttmann, G.

    2011-03-01

    Early detection of cancerous lesions of the larynx may be the best method of improving patient quality of life and survival rates. New in-vivo technologies may be of great clinical relevance in improving the accuracy of sampling during microlaryngeal surgery. Optical coherence tomography (OCT) is an optical imaging technique that clearly identifies basement membrane violation caused by laryngeal cancer. With a microscope-based spectral domain OCT (SD-OCT) we reached in vivo a fairly accurate assessment of benign and dysplastic laryngeal lesions. Recent improvements in OCT technology have led to the development of high-speed OCT systems displaying millions of pixels per second. These systems allow non-contact real-time imaging of large sections of laryngeal tissue. Polarization contrast OCT (PS-OCT) may provide additional information about the lamina propria of the true vocal cord because of the birefringence of connective tissue. We present microscope-based high-speed SD-OCT images with and without polarization contrast and 3D volumes of selected laryngeal pathologies in order to demonstrate our current concepts for the intended intraoperative application. High-speed SD-OCT and polarization contrast can also be complemented by our recently developed rigid confocal endoscopic system to obtain cellular and sub-cellular information about the tissue. Further perspectives will be presented.

  10. Making sense of a new technology in clinical practice: a qualitative study of patient and physician perspectives.

    Science.gov (United States)

    Pals, Regitze A S; Hansen, Ulla M; Johansen, Clea B; Hansen, Christian S; Jørgensen, Marit E; Fleischer, Jesper; Willaing, Ingrid

    2015-09-22

    The number of new technologies for risk assessment available in health care is increasing. These technologies are intended to contribute to both improved care practices and improved patient outcomes. To do so however, there is a need to study how new technologies are understood and interpreted by users in clinical practice. The objective of this study was to explore patient and physician perspectives on the usefulness of a new technology to detect Cardiovascular Autonomic Neuropathy (CAN) in a specialist diabetes clinic. The technology is a handheld device that measures resting heart rate and conducts three cardiac autonomic reflex tests to evaluate heart rate variability. The study relied on three sources of data: observations of medical consultations where results of the CAN test were reported (n = 8); interviews with patients who had received the CAN test (n = 19); and interviews with physicians who reported results of the CAN test (n = 9). Data were collected at the specialist diabetes clinic between November 2013 and January 2014. Data were analysed using the concept of technological frames which is used to assess how physicians and patients understand and interpret the new technology. Physicians generally found it difficult to communicate test results to patients in terms that patients could understand and to translate results into meaningful implications for the treatment of patients. Results of the study indicate that patients did not recall having done the CAN test nor recall receiving the results. Furthermore, patients were generally unsure about the purpose of the CAN test and the implications of the results. Involving patients and physicians is essential when a new technology is introduced in clinical practice. This particularly includes the interpretation and communication processes related to its use. The integration of a new risk assessment technology into clinical practice can be accompanied by several challenges. It is suggested that

  11. Discovering complementary colors from the perspective of steam education

    Science.gov (United States)

    Karabey, Burak; Yigit Koyunkaya, Melike; Enginoglu, Turan; Yurumezoglu, Kemal

    2018-05-01

    This study explored the theory and applications of complementary colors using a technology-based activity designed from the perspective of STEAM education. Complementary colors and their areas of use were examined from the perspective of physics, mathematics and art, respectively. The study, which benefits from technology, makes the theory of complementary colors accessible to all through practical applications and provides a multidisciplinary, integrated and innovative technique of teaching the subject of colors, which could be used to teach complementary colors.

  12. Handbook of the Economics of Education. Volume 4

    Science.gov (United States)

    Hanushek, Erik A., Ed.; Machin, Stephen J., Ed.; Woessmann, Ludger, Ed.

    2011-01-01

    What is the value of an education? Volume 4 of the Handbooks in the Economics of Education combines recent data with new methodologies to examine this and related questions from diverse perspectives. School choice and school competition, educator incentives, the college premium, and other considerations help make sense of the investments and…

  13. Y-12 Plant Remedial Action technology logic diagram. Volume I: Technology evaluation

    International Nuclear Information System (INIS)

    1994-09-01

    The Y-12 Plant Remedial Action Program addresses remediation of the contaminated groundwater, surface water and soil in the following areas located on the Oak Ridge Reservation: Chestnut Ridge, Bear Creek Valley, the Upper and Lower East Fork Popular Creek Watersheds, CAPCA 1, which includes several areas in which remediation has been completed, and CAPCA 2, which includes dense nonaqueous phase liquid wells and a storage facility. There are many facilities within these areas that are contaminated by uranium, mercury, organics, and other materials. This Technology Logic Diagram identifies possible remediation technologies that can be applied to the soil, water, and contaminants for characterization, treatment, and waste management technology options are supplemented by identification of possible robotics or automation technologies. These would facilitate the cleanup effort by improving safety, of remediation, improving the final remediation product, or decreasing the remediation cost. The Technology Logic Diagram was prepared by a diverse group of more than 35 scientists and engineers from across the Oak Ridge Reservation. Most are specialists in the areas of their contributions. 22 refs., 25 tabs

  14. Technology for nature conservation: an industry perspective.

    Science.gov (United States)

    Joppa, Lucas N

    2015-11-01

    Information age technology has the potential to change the game for conservation by continuously monitoring the pulse of the natural world. Whether or not it will depends on the ability of the conservation sector to build a community of practice, come together to define key technology challenges and work with a wide variety of partners to create, implement, and sustain solutions. I describe why these steps are necessary, outline the latest developments in the field and offer actionable ways forward for conservation agencies, universities, funding bodies, professional societies, and technology corporations to come together to realize the revolution that computational technologies can bring for biodiversity conservation.

  15. Critical Qualitative Research Reader. Critical Qualitative Research. Volume 2

    Science.gov (United States)

    Steinberg, Shirley R., Ed.; Cannella, Gaile S., Ed.

    2012-01-01

    This volume of transformed research utilizes an activist approach to examine the notion that nothing is apolitical. Research projects themselves are critically examined for power orientations, even as they are used to address curricular problems and educational or societal issues. Philosophical perspectives that have facilitated an understanding…

  16. Two Tales of Technology

    DEFF Research Database (Denmark)

    Khalil, Sabine; Winkler, Till J.; Xiao, Xiao

    2017-01-01

    While cloud computing is becoming a mainstream IT sourcing option, especially large companies struggle with the internal governance of cloud and the issue of shadow IT. This study takes a technological frames perspective to contrast the knowledge and expectations that business versus IT stakehold......While cloud computing is becoming a mainstream IT sourcing option, especially large companies struggle with the internal governance of cloud and the issue of shadow IT. This study takes a technological frames perspective to contrast the knowledge and expectations that business versus...... IT stakeholders have regarding cloud IT. Our interview data from 20 business and IT managers display the incongruences between these two groups’ technological frames and how this relates to their governing actions: While business managers emphasize the benefits frames of cloud computing and tend to undermine...

  17. Volume holographic memory

    Directory of Open Access Journals (Sweden)

    Cornelia Denz

    2000-05-01

    Full Text Available Volume holography represents a promising alternative to existing storage technologies. Its parallel data storage leads to high capacities combined with short access times and high transfer rates. The design and realization of a compact volume holographic storage demonstrator is presented. The technique of phase-coded multiplexing implemented to superimpose many data pages in a single location enables to store up to 480 holograms per storage location without any moving parts. Results of analog and digital data storage are shown and real time optical image processing is demonstrated.

  18. MRI Volume Fusion Based on 3D Shearlet Decompositions.

    Science.gov (United States)

    Duan, Chang; Wang, Shuai; Wang, Xue Gang; Huang, Qi Hong

    2014-01-01

    Nowadays many MRI scans can give 3D volume data with different contrasts, but the observers may want to view various contrasts in the same 3D volume. The conventional 2D medical fusion methods can only fuse the 3D volume data layer by layer, which may lead to the loss of interframe correlative information. In this paper, a novel 3D medical volume fusion method based on 3D band limited shearlet transform (3D BLST) is proposed. And this method is evaluated upon MRI T2* and quantitative susceptibility mapping data of 4 human brains. Both the perspective impression and the quality indices indicate that the proposed method has a better performance than conventional 2D wavelet, DT CWT, and 3D wavelet, DT CWT based fusion methods.

  19. MRI Volume Fusion Based on 3D Shearlet Decompositions

    Directory of Open Access Journals (Sweden)

    Chang Duan

    2014-01-01

    Full Text Available Nowadays many MRI scans can give 3D volume data with different contrasts, but the observers may want to view various contrasts in the same 3D volume. The conventional 2D medical fusion methods can only fuse the 3D volume data layer by layer, which may lead to the loss of interframe correlative information. In this paper, a novel 3D medical volume fusion method based on 3D band limited shearlet transform (3D BLST is proposed. And this method is evaluated upon MRI T2* and quantitative susceptibility mapping data of 4 human brains. Both the perspective impression and the quality indices indicate that the proposed method has a better performance than conventional 2D wavelet, DT CWT, and 3D wavelet, DT CWT based fusion methods.

  20. Local and Global Illumination in the Volume Rendering Integral

    Energy Technology Data Exchange (ETDEWEB)

    Max, N; Chen, M

    2005-10-21

    This article is intended as an update of the major survey by Max [1] on optical models for direct volume rendering. It provides a brief overview of the subject scope covered by [1], and brings recent developments, such as new shadow algorithms and refraction rendering, into the perspective. In particular, we examine three fundamentals aspects of direct volume rendering, namely the volume rendering integral, local illumination models and global illumination models, in a wavelength-independent manner. We review the developments on spectral volume rendering, in which visible light are considered as a form of electromagnetic radiation, optical models are implemented in conjunction with representations of spectral power distribution. This survey can provide a basis for, and encourage, new efforts for developing and using complex illumination models to achieve better realism and perception through optical correctness.

  1. Relationships between volume, efficiency, and quality in surgery--a delicate balance from managerial perspectives.

    Science.gov (United States)

    Kraus, Thomas W; Büchler, Markus W; Herfarth, Christian

    2005-10-01

    Volume, efficiency, and quality in hospital care are often mixed in debate. We analyze how these dimensions are interrelated in surgical hospital management, with particular focus on volume effects: under financial constraints, efficiency is the best form of cost control. External perception of quality is important to attract patients and gain volumes. There are numerous explicit and implicit notions of surgical quality. The relevance of implicit criteria (functionality, reliability, consistency, customaziability, convenience) can change in the time course of hospital competition. Outcome data theoretically are optimal measures of quality, but surgical quality is multifactorially influenced by case mix, surgical technique, indication, process designs, organizational structures, and volume. As quality of surgery is hard to grade, implicit criteria such as customizability currently often overrule functionality (outcome) as the dominant market driver. Activities and volumes are inputs to produce quality. Capability does not translate to ability in a linear function. Adequate process design is important to realize efficiency and quality. Volumes of activities, degree of standardization, specialization, and customer involvement are relevant estimates for process design in services. Flow-orientated management focuses primarily on resource utilization and efficiency, not on surgical quality. The relationship between volume and outcome in surgery is imperfectly understood. Factors involve learning effects both on process efficiency and quality, increased standardization and task specialization, process flow homogeneity, and potential for process integration. Volume is a structural component to develop efficiency and quality. The specific capabilities and process characteristics that contribute to surgical outcome improvement should be defined and exported. Adequate focus should allow even small institutions to benefit from volume-associated effects. All volumes

  2. Cost effectiveness studies of environmental technologies: Volume 1

    International Nuclear Information System (INIS)

    Silva, E.M.; Booth, S.R.

    1994-02-01

    This paper examines cost effectiveness studies of environmental technologies including the following: (1) In Situ Air Stripping, (2) Surface Towed Ordinance Locator System, (3) Ditch Witch Horizontal Boring Technology, (4) Direct Sampling Ion Trap Mass Spectrometer, (5) In Situ Vitrification, (6) Site Characterization and Analysis Penetrometer System, (7) In Situ Bioremediation, and (8) SEAMIST Membrane System Technology

  3. Part I.5: Perspectives on Technological Transformation

    DEFF Research Database (Denmark)

    Müller, Jens

    2003-01-01

    The article describes the transfer processes between the different technology and social systems......The article describes the transfer processes between the different technology and social systems...

  4. New Technologies of Information and Communications from a Science, Technology and Society.

    Directory of Open Access Journals (Sweden)

    Manuel Martín Rodríguez

    2012-03-01

    Full Text Available With this work we want to make a short analysis of the New Technologies of Information and Communications in basic aspects of interest to technology education, refered to it from a Science Technology and Society (CTS. Based on different conceptions of technology and technological literacy, considers issues such as beliefs about the nature of technological knowledge, relationships and differences between scientific knowledge and the interactions between technology and society, the interests and attitudes of teachers and students to technology and learning from the perspective of education and, finally, various approaches to technology education programs following the approaches Science, Technology and Society.

  5. Approved Site Treatment Plan, Volumes 1 and 2. Revision 4

    Energy Technology Data Exchange (ETDEWEB)

    Helmich, E.H.; Molen, G.; Noller, D.

    1996-03-22

    The US Department of Energy, Savannah River Operations Office (DOE-SR), has prepared the Site Treatment Plan (STP) for Savannah River Site (SRS) mixed wastes in accordance with RCRA Section 3021(b), and SCDHEC has approved the STP (except for certain offsite wastes) and issued an order enforcing the STP commitments in Volume 1. DOE-SR and SCDHEC agree that this STP fulfills the requirements contained in the FFCAct, RCRA Section 3021, and therefore, pursuant to Section 105(a) of the FFCAct (RCRA Section 3021(b)(5)), DOE`s requirements are to implement the plan for the development of treatment capacities and technologies pursuant to RCRA Section 3021. Emerging and new technologies not yet considered may be identified to manage waste more safely, effectively, and at lower cost than technologies currently identified in the plan. DOE will continue to evaluate and develop technologies that offer potential advantages in public acceptance, privatization, consolidation, risk abatement, performance, and life-cycle cost. Should technologies that offer such advantages be identified, DOE may request a revision/modification of the STP in accordance with the provisions of Consent Order 95-22-HW. The Compliance Plan Volume (Volume 1) identifies project activity schedule milestones for achieving compliance with Land Disposal Restrictions (LDR). Information regarding the technical evaluation of treatment options for SRS mixed wastes is contained in the Background Volume (Volume 2) and is provided for information.

  6. Approved Site Treatment Plan, Volumes 1 and 2. Revision 4

    International Nuclear Information System (INIS)

    Helmich, E.H.; Molen, G.; Noller, D.

    1996-01-01

    The US Department of Energy, Savannah River Operations Office (DOE-SR), has prepared the Site Treatment Plan (STP) for Savannah River Site (SRS) mixed wastes in accordance with RCRA Section 3021(b), and SCDHEC has approved the STP (except for certain offsite wastes) and issued an order enforcing the STP commitments in Volume 1. DOE-SR and SCDHEC agree that this STP fulfills the requirements contained in the FFCAct, RCRA Section 3021, and therefore, pursuant to Section 105(a) of the FFCAct (RCRA Section 3021(b)(5)), DOE's requirements are to implement the plan for the development of treatment capacities and technologies pursuant to RCRA Section 3021. Emerging and new technologies not yet considered may be identified to manage waste more safely, effectively, and at lower cost than technologies currently identified in the plan. DOE will continue to evaluate and develop technologies that offer potential advantages in public acceptance, privatization, consolidation, risk abatement, performance, and life-cycle cost. Should technologies that offer such advantages be identified, DOE may request a revision/modification of the STP in accordance with the provisions of Consent Order 95-22-HW. The Compliance Plan Volume (Volume 1) identifies project activity schedule milestones for achieving compliance with Land Disposal Restrictions (LDR). Information regarding the technical evaluation of treatment options for SRS mixed wastes is contained in the Background Volume (Volume 2) and is provided for information

  7. Oak Ridge National Laboratory Technology Logic Diagram

    International Nuclear Information System (INIS)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D ampersand D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D ampersand D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D ampersand D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2

  8. Viability Assessment of a Repository at Yucca Mountain. Volume 1: Introduction and Site Characteristics

    Energy Technology Data Exchange (ETDEWEB)

    None

    1998-12-01

    This first volume contains an introduction to the viability assessment, including the purpose, scope, waste forms, technical challenges, an historical perspective, regulatory framework, management of the repository, technical components, preparations for the license application, and repository milestones after the assessment. The second part of this first volume addresses characteristics of the Yucca Mountain site.

  9. An Independent Scientific Assessment of Well Stimulation in California Volume I

    Energy Technology Data Exchange (ETDEWEB)

    Long, Jane C.S. [California Council on Science and Technology, Sacramento, CA (United States); Feinstein, Laura C. [California Council on Science and Technology, Sacramento, CA (United States); Birkholzer, Jens [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jordan, Preston [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Houseworth, James [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Dobson, Patrick F. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Heberger, Matthew [Pacific Inst., Oakland, CA (United States); Gautier, Donald L. [Dr. Donald Dautier, LLC., Palo Alto, CA (United States)

    2015-01-01

    In 2013, the California Legislature passed Senate Bill 4 (SB 4), setting the framework for regulation of well stimulation technologies in California, including hydraulic fracturing. SB 4 also requires the California Natural Resources Agency to conduct an independent scientific study of well stimulation technologies in California to assess current and potential future practices, including the likelihood that well stimulation technologies could enable extensive new petroleum production in the state, evaluate the impacts of well stimulation technologies and the gaps in data that preclude this understanding, identify risks associated with current practices, and identify alternative practices which might limit these risks. The study is issued in three volumes. This document, Volume I, provides the factual basis describing well stimulation technologies, how and where operators deploy these technologies for oil and gas production in California, and where they might enable production in the future. Volume II discusses how well stimulation affects water, the atmosphere, seismic activity, wildlife and vegetation, traffic, light and noise levels; it will also explore human health hazards, and identify data gaps and alternative practices. Volume III presents case studies to assess environmental issues and qualitative

  10. Advances in Technology and Management : Proceedings of the 2012 International Conference on Technology and Management

    CERN Document Server

    2012-01-01

    This book Advances in Technology and Management contains 116 full length papers presented at the International Conference on Technology and Management, held on June 12-13, 2012, Jeju-Island, Korea. The goal of ICTAM 2012 is to bring together researchers working in many different areas of technology and management to foster international collaborations and exchange of new ideas.   This volume can be divided into two sections on the basis of the classification of manuscripts considered. The first section deals with technology. The second section of this volume consists of management.

  11. Applying Technology to Unmet Needs. Technology and the American Economy, Appendix, Volume V.

    Science.gov (United States)

    National Commission on Technology, Automation and Economic Progress, Washington, DC.

    Twelve studies dealing with the problems of applying technology to unmet human and community needs are presented. "Urban Planning and Metropolitan Development--The Role of Technology," examines the possibilities of the computer and other modern planning tools. "Technology, Automation, and Economic Progress in Housing and Urban Development"…

  12. State perspectives on clean coal technology deployment

    Energy Technology Data Exchange (ETDEWEB)

    Moreland, T. [State of Illinois Washington Office, Washington, DC (United States)

    1997-12-31

    State governments have been funding partners in the Clean Coal Technology program since its beginnings. Today, regulatory and market uncertainties and tight budgets have reduced state investment in energy R and D, but states have developed program initiatives in support of deployment. State officials think that the federal government must continue to support these technologies in the deployment phase. Discussions of national energy policy must include attention to the Clean Coal Technology program and its accomplishments.

  13. Understanding The Process Of Strategic Change From A Structurational And Cognitive Perspective: Case Study Of The Users Of A New Technology

    OpenAIRE

    Slocum, Alesia

    2007-01-01

    How does strategic change happen, and how is it understood around technology? This ethnographic research has sought to better understand this process, from a structurational, cognitive and practice perspective. Researchers have shown that change is a continuous and ongoing process (Tsoukas and Chia, 2002; Weick and Quinn, 1999), while others have shown that change, while not determinate, can be intentional and directed to a large extent by change agents in practice (Balogun ...

  14. Thin-film cadmium telluride photovoltaics: ES and H issues, solutions, and perspectives

    International Nuclear Information System (INIS)

    Zweibel, K.; Moskowitz, P.; Fthenakis, V.

    1998-02-01

    Photovoltaics (PV) is a growing business worldwide, with new technologies evolving towards potentially large-volume production. PV use produces no emissions, thus offsetting many potential environmental problems. However, the new PV technologies also bring unfamiliar environment, safety, and health (ES and H) challenges that require innovative solutions. This is a summary of the issues, solutions, and perspectives associated with the use of cadmium in one of the new and important PV technologies: thin-film, cadmium telluride (CdTe) PV, which is being developed and commercialized by several companies including Solar Cells Inc. (Toledo, Ohio), BP Solar (Fairfield, California), and Matsushita (Japan). The principal ES and H issue for thin-film cadmium telluride PV is the potential introduction of cadmium--a toxic heavy metal--into the air or water. The amount of cadmium in thin-film PV, however, is quite small--one nickel cadmium flashlight battery has about as much cadmium (7 g) as a square meter of PV module using current technology--and a typical cordless power tool will have 5--10 batteries. CdTe modules are also very well sealed, limiting the chance of release. Nonetheless, minimizing the amount of cadmium in cadmium telluride modules and preventing the introduction of that cadmium into the environment is a top priority for National Renewable Energy Laboratory researchers and cadmium telluride PV manufacturers

  15. Why Masculine Technologies Matter

    NARCIS (Netherlands)

    Oldenziel, R.; Lerman, N.; Oldenziel, R.; Mohun, A.

    2003-01-01

    In contrast to McGaw's non-obvious technologies and female perspective, making the invisible visible, Ruth Oldenziel begins with a very visible kind of technology: the automobile. She argues, however, that the fondness of boys for cars and the nature of male technophilia in the twentieth century are

  16. Transatlantic Innovations: a new approach to international ideas and technology.

    Science.gov (United States)

    Evans, Gregory R D; Blondeel, Phillip; Marchac, Daniel; Kinney, Brian; Cunningham, Bruce; Neuhann-Lorenz, Constance

    2010-07-01

    In April of this past year, Transatlantic Innovations brought a variety of organizations and industry together for an international exchange of ideas, new technology, and current trends in plastic surgery. The meeting was highly interactive and included audience response devices. The focus was on 10 major areas: (1) new surgical techniques; (2) composite allografts versus conventional techniques, facing the future; (3) interspecialty collaboration versus competition; (4) the business of plastic surgery, best practices; (5) the image of the plastic surgeon, branding yourself; (6) medical tourism; (7) publicity; (8) the regulation of innovation, U.S. Food and Drug Administration and European Medicines Agency perspective; (9) the future of plastic surgery, cutting edge technologies; and (10) applications and controversies in fat grafting. The meeting concluded with the 8th International Committee for Quality Assurance, Medical Technologies and Devices in Plastic Surgery Consensus Conference with the development of a consensus statement. Through an interactive audience response system, additional questions and attitudes were asked of the audience and, in real time, international differences were identified, which led to further discussions from panelists. Responses were identified in three major groups: European Union, North America, and the Rest of the World. Responses and data are included in this article. The meeting brought participants, industry, regulators, and educators from both sides of the Atlantic. The interaction of these groups in these outlined topics brought a unique perspective to the meeting and, in the end, volumes of data. We have more in common than we believe. It is our anticipation that as we as plastic surgeons move forward, we can use these interactions to help our own practices but more specifically the specialty as a whole.

  17. Technology development in road construction, how government roles affect project performance

    NARCIS (Netherlands)

    Caerteling, Jasper

    2008-01-01

    This dissertation contributes to both the academic and policy debates on the roles of government in technology development in the public sector. In the literature, there are many perspectives that deal with government’s roles in technology development. These perspectives include competition,

  18. Perspective

    DEFF Research Database (Denmark)

    Kussmann, Martin; Morine, Melissa J; Hager, Jörg

    2013-01-01

    We review here the status of human type 2 diabetes studies from a genetic, epidemiological, and clinical (intervention) perspective. Most studies limit analyses to one or a few omic technologies providing data of components of physiological processes. Since all chronic diseases are multifactorial...... at different time points along this longitudinal investigation are performed with a comprehensive set of omics platforms. These data sets are generated in a biological context, rather than biochemical compound class-driven manner, which we term "systems omics."...

  19. Social Shaping in Danish Technology Assessment

    DEFF Research Database (Denmark)

    Hansen, Anne Grethe; Clausen, Christian

    2003-01-01

    The term ‘social shaping of technology’ has been used broadly as a response to techno-economic deterministic understandings of the relations between technology and society. Social shaping has brought together analysts from different backgrounds who share a common interest in the role of social an...... in these projects contributed to new insights into the processes of technological change and thus to policy formulation. The social shaping perspective and technology assessment experiences are suggested as important guides to future technology strategies....... and political action for technology change. The authors of this article suggest that the social shaping perspective draws on lessons from technology assessments of earlier decades, lessons about the role of technology debate, participation and democratic control. We suggest that these are important......The term ‘social shaping of technology’ has been used broadly as a response to techno-economic deterministic understandings of the relations between technology and society. Social shaping has brought together analysts from different backgrounds who share a common interest in the role of social...

  20. Understanding the impact of technology on firms’ business models

    DEFF Research Database (Denmark)

    Cavalcante, Sergio Andre

    2013-01-01

    of a new business model for the partner companies in the consortium. Practical implications – This paper is important in that it will help companies understand technological impact from a business model perspective, thereby enabling them to manage innovation better by distinguishing between the creation......, extension, revision or termination of business models. Originality/value – The main contribution of this study is its use of the business model perspective to analyse the impact of an emergent technology on companies’ innovation activities. This perspective makes it easier to develop strategic initiatives......Purpose – The purpose of this paper is to identify the impact of a new global positioning technology on firms’ business models. Design/methodology/approach – The empirical setting was a consortium of Danish organizations, established to develop a positioning-based technology platform as a basis...

  1. Perspectives of energy efficient technologies penetration in the Greek domestic sector, through the analysis of Energy Performance Certificates

    International Nuclear Information System (INIS)

    Gelegenis, J.; Diakoulaki, D.; Lampropoulou, H.; Giannakidis, G.; Samarakou, M.; Plytas, N.

    2014-01-01

    The building sector in Greece presents a huge energy saving potential, the largest part of which is remaining unexploited. The recently enacted legislation for the energy performance of buildings, in combination with the financial support provided by funding programmes to low income families is expected to significantly boost the deployment of energy efficient technologies in the Greek domestic sector. The exploitation of these legal and financial instruments follows a formalised process of energy audits, resulting in buildings classification and in the submission of Energy Performance Certificates (EPCs) including suggestions to improve the dwellings' energy performance. The paper aims at an ex-ante evaluation of the market trends revealed by EPCs in Greece, in order to identify the perspectives of individual technologies and to assess the degree to which the certification procedure helps in improving the energy performance of buildings. The results indicate a strong trend towards less cost-effective technologies, revealing a sub-optimal allocation of financial resources and putting into risk the path towards the achievement of EU targets for 2020. - Highlights: • Energy Performance Certificates reveal market trends of energy efficient technologies. • SWH, replacement of windows and walls/roof insulation are most often recommended. • Other measures are controls, switch to NG; low cost measures are rarely recommended. • Cost-effectiveness is not the main factor explaining technology recommendations. • Amendment of EPC document and inspection process may enhance its effectiveness

  2. Ultrasound automated volume calculation in reproduction and in pregnancy.

    Science.gov (United States)

    Ata, Baris; Tulandi, Togas

    2011-06-01

    To review studies assessing the application of ultrasound automated volume calculation in reproductive medicine. We performed a literature search using the keywords "SonoAVC, sonography-based automated volume calculation, automated ultrasound, 3D ultrasound, antral follicle, follicle volume, follicle monitoring, follicle tracking, in vitro fertilization, controlled ovarian hyperstimulation, embryo volume, embryonic volume, gestational sac, and fetal volume" and conducted the search in PubMed, Medline, EMBASE, and the Cochrane Database of Systematic Reviews. Reference lists of identified reports were manually searched for other relevant publications. Automated volume measurements are in very good agreement with actual volumes of the assessed structures or with other validated measurement methods. The technique seems to provide reliable and highly reproducible results under a variety of conditions. Automated measurements take less time than manual measurements. Ultrasound automated volume calculation is a promising new technology which is already used in daily practice especially for assisted reproduction. Improvements to the technology will undoubtedly render it more effective and increase its use. Copyright © 2011 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  3. When technology, science and culture meet: insights from ancient Chinese technology

    Science.gov (United States)

    Lee, Yeung Chung

    2017-10-01

    This paper draws together two important agendas in science education. The first is making science education more inclusive such that students from non-Western or indigenous cultures can benefit from culturally relevant curricula. The second is integrating technology into the curriculum under the umbrella of Science-Technology-Society (STS) education to embrace the social aspects of science, with technology serving as a bridge. The advancement of the first agenda is hindered by the pursuance by both Western and non-Western societies of narrow cultural and practical goals without considering the development of science and technology from a cross-cultural perspective. The second agenda is limited by the misconception that technology is applied science, leading to the exclusion from STS discussions of pre-science or indigenous technologies developed by non-Western cultures. Through selected case studies of the evolution of Chinese traditional technologies and their interaction with science, this paper offers a perspective from the Far East, and argues for situating culturally responsive science education in broader historical and cross-cultural contexts to acknowledge the multi-cultural contributions to science and technology. A form of cross-cultural STS education is advanced, encompassing the cultural basis of technological developments, technology diffusion, interactions of traditional technology with science, and the potential development of traditional or indigenous technologies. This approach provides a bridge between the existing universal science education paradigm promoted in the West and the different forms of multi-cultural education advocated by indigenous science educators. To translate theory into practice, a conceptual framework is proposed in which the essential transdisciplinary knowledge base, curricular goals, and pedagogical approaches are embedded.

  4. Gas-to-liquid technologies: India's perspective

    International Nuclear Information System (INIS)

    Reddy Keshav, Tirupati; Basu, S.

    2007-01-01

    Gas-to-liquid (GTL) technologies are capable of converting gas to clean, useful liquid hydrocarbons and thus suitable for addressing problems of remote gas utilization, increase in crude oil price, depletion of fossil fuel and environmental pollution. The Indian state of Tripura is considered to be the richest province with 26 billion cubic meters of gas reserves. Neighboring country Myanmar has huge gas reserves but these reserves remain unutilized mainly because of land-locked situation. GTL is a well developed and proven technology and it is an important option for moving natural gas to the market place. GTL options include not only the well-known production of Fischer-Tropsch synthesis liquids but also the production of oxygen containing fuels, fuel additives and chemicals, such as methanol and DME. An alternative, promising option to convert surplus gas is the direct route of methane conversion, which is more energy efficient than the indirect route since it bypasses the energy intensive endothermic steam reforming step of syngas formation. On-site conversion to liquid products of commercial importance using direct route would make transportation of these natural deposits much more economical and practical. In this paper an attempt has been made to review recent developments in syngas technologies, direct routes of methane conversion into useful liquids, and status of both existing and future developments in GTL industry around the world. Finally challenges in GTL technology are discussed. (author)

  5. Communication technologies in the study environment

    DEFF Research Database (Denmark)

    Thorhauge, Anne Mette

    2012-01-01

    will argue that the ways in which these technologies are used reflects two different perspectives on the interplay between communication technology and organisational structure: organisational structure as an anticipation of communication patterns implied in course management system’s design......In this article, I will analyse and discuss two qualitative case studies concerning ICT in the study environment at the University of Copenhagen, Denmark. I will place special focus on the way in which organisational perspectives as well as technological affordances shape how communication...... technologies are integrated into organisational structures and practices on campus. This involves a comparison between course management systems on the one hand and students’ personal media (mobile phones, e-mails) on the other hand, with regard to how these are used on campus. On the basis of this analysis, I...

  6. Technological Innovation of Agricultural Products Processing Enterprises from the Perspective of Modern Marketing——A Case of Agricultural Products Processing Enterprises in Hubei Province,China

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The science and technology development of agricultural products processing enterprises in Hubei Province is analyzed.From the perspective of modern marketing,problems in the research and development work of agricultural products processing enterprises are analyzed from the aspects of market,personal training and technology radiation,which are mainly the lack of close connection with market.Countermeasures for the technological innovation of agricultural products processing enterprises are put forward,such as establishing modern enterprise culture with innovative features,strengthening the market benefits of brand,constructing a comprehensive customer orientation information platform,scientifically predicting and developing the market,doing well in market positioning of enterprise,selecting corresponding technology innovation strategy,taking technological innovation strategy as the basis,realizing the transformation from "4P" marketing combination to "4C",cultivating technical personnel,and realizing the integration of professional skill and marketing ability.

  7. Perspectives on Communicating with the Net Generation

    Science.gov (United States)

    Zimmerman, Lynn; Milligan, Anastasia Trekles

    2008-01-01

    Lynn Zimmerman and Anastasia Trekles Milligan examine technological communication from the perspectives of two instructors, one a digital immigrant and the other a digital native. Today's students are digital natives, reared in a world permeated by interactive technology; as a result, they are used to a model of communication that is significantly…

  8. Bare-Hand Volume Cracker for Raw Volume Data Analysis

    Directory of Open Access Journals (Sweden)

    Bireswar Laha

    2016-09-01

    Full Text Available Analysis of raw volume data generated from different scanning technologies faces a variety of challenges, related to search, pattern recognition, spatial understanding, quantitative estimation, and shape description. In a previous study, we found that the Volume Cracker (VC 3D interaction (3DI technique mitigated some of these problems, but this result was from a tethered glove-based system with users analyzing simulated data. Here, we redesigned the VC by using untethered bare-hand interaction with real volume datasets, with a broader aim of adoption of this technique in research labs. We developed symmetric and asymmetric interfaces for the Bare-Hand Volume Cracker (BHVC through design iterations with a biomechanics scientist. We evaluated our asymmetric BHVC technique against standard 2D and widely used 3D interaction techniques with experts analyzing scanned beetle datasets. We found that our BHVC design significantly outperformed the other two techniques. This study contributes a practical 3DI design for scientists, documents lessons learned while redesigning for bare-hand trackers, and provides evidence suggesting that 3D interaction could improve volume data analysis for a variety of visual analysis tasks. Our contribution is in the realm of 3D user interfaces tightly integrated with visualization, for improving the effectiveness of visual analysis of volume datasets. Based on our experience, we also provide some insights into hardware-agnostic principles for design of effective interaction techniques.

  9. Industrial Sector Technology Use Model (ISTUM): industrial energy use in the United States, 1974-2000. Volume 3. Appendix on service and fuel demands. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-10-01

    This book is the third volume of the ISTUM report. The first volume of the report describes the primary model logic and the model's data inputs. The second volume lists and evaluates the results of one model run. This and the fourth volume give supplementary information in two sets of model data - the energy consumption base and technology descriptions. Chapter III of Vol. I, Book 1 describes the ISTUM demand base and explains how that demand base was developed. This volume serves as a set of appendices to that chapter. The chapter on demands in Vol. I describes the assumptions and methodology used in constructing the ISTUM demand base; this volume simply lists tables of data from that demand base. This book divides the demand tables into two appendices. Appendix III-1 contains detailed tables on ISTUM fuel-consumption estimates, service-demand forecasts, and size and load-factor distributions. Appendix III-2 contains tables detailing ISTUM allocations of each industry's fuel consumption to service sectors. The tables show how the ECDB was used to develop the ISTUM demand base.

  10. Technology of high-level nuclear waste disposal. Advances in the science and engineering of the management of high-level nuclear wastes. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, P.L. (ed.)

    1982-01-01

    The twenty papers in this volume are divided into three parts: site exploration and characterization; repository development and design; and waste package development and design. These papers represent the status of technology that existed in 1981 and 1982. Individual papers were processed for inclusion in the Energy Data Base.

  11. Technology of high-level nuclear waste disposal. Advances in the science and engineering of the management of high-level nuclear wastes. Volume 2

    International Nuclear Information System (INIS)

    Hofmann, P.L.

    1982-01-01

    The twenty papers in this volume are divided into three parts: site exploration and characterization; repository development and design; and waste package development and design. These papers represent the status of technology that existed in 1981 and 1982. Individual papers were processed for inclusion in the Energy Data Base

  12. Advanced technologies, systems, and applications

    CERN Document Server

    Avdaković, Samir

    2017-01-01

    This volume spans a wide range of technical disciplines and technologies, including complex systems, biomedical engineering, electrical engineering, energy, telecommunications, mechanical engineering, civil engineering, and computer science. The papers included in this volume were presented at the International Symposium on Innovative and Interdisciplinary Applications of Advanced Technologies (IAT), held in Neum, Bosnia and Herzegovina on June 26 and 27, 2016. This highly interdisciplinary volume is devoted to various aspects and types of systems. Systems thinking is crucial for successfully building and understanding man-made, natural, and social systems. .

  13. Technology 2001: The Second National Technology Transfer Conference and Exposition, volume 1

    Science.gov (United States)

    1991-01-01

    Papers from the technical sessions of the Technology 2001 Conference and Exposition are presented. The technical sessions featured discussions of advanced manufacturing, artificial intelligence, biotechnology, computer graphics and simulation, communications, data and information management, electronics, electro-optics, environmental technology, life sciences, materials science, medical advances, robotics, software engineering, and test and measurement.

  14. Digital technology in physical education: global perspectives

    NARCIS (Netherlands)

    Koekoek, Jeroen; van Hilvoorde, I.M.

    2018-01-01

    The rapid development of digital technologies has opened up new possibilities for how Physical Education is taught. This book offers a comprehensive, practice-oriented and critical exploration of the actual and potential applications of digital technologies in PE. It considers the opportunities that

  15. Technology 2004, Vol. 2

    Science.gov (United States)

    1995-01-01

    Proceedings from symposia of the Technology 2004 Conference, November 8-10, 1994, Washington, DC. Volume 2 features papers on computers and software, virtual reality simulation, environmental technology, video and imaging, medical technology and life sciences, robotics and artificial intelligence, and electronics.

  16. The history and perspective of Romania-USA cooperation in the field of technologic transfer of TRIGA reactor concept

    International Nuclear Information System (INIS)

    Ciocaanescu, M.; Ionescu, M.

    1996-01-01

    The cooperation between Romania and the USA in the field of technologic transfer of nuclear research reactor technology began with the steady state 14 MW t TRIGA reactor, installed at INR Pitesti, Romania. It is the first in the range of TRIGA reactors proposed as a materials testing reactor. The first criticality was reached in November 19, 1979 and first operation at 14 MW t level was in February 1980. The paper will present the short history of this cooperation and the perspective for a new cooperation for building a Nuclear Heating Plant using the TRIGA reactor concept for demonstration purpose. The energy crisis is a world-wide problem which affects each country in different ways because the resources and the consumption are unfairly distributed. World-wide research points out that the fossil fuel sources are not to be considered the main energy sources for the long term as they are limited

  17. Technological Criteria Technology-Environmental under a Systemic Approach: Chemistry Technology Transfer

    Directory of Open Access Journals (Sweden)

    Durán-García Martín Enrique

    2014-07-01

    Full Text Available Currently the transfer of chemical technology is a process that contributes to the technology policy of a country, an industry or an organization in general chemistry. This process requires the application of clear criteria for the proper development of the complex interrelations in the transfer of chemical technology. A group of criteria that are present, are those related to environmental technology which intrinsically define the technology and its impact to the environment. Therefore, the transfer of chemical technology requires technological-environmental criteria defining, in conjunction with other criteria, an adequate process for the selection, acquisition and incorporation of technology in a holistic perspective, so it provides feasible solutions the chemical industry in pursuit of their goals. Then the criterion becomes a benchmark for assessing an appropriate technology transfer process. We performed a theoretical analysis of the technological and environmental criteria, proposing thirty-six (36 technological-environmental criteria interrelated under a systemic approach in the process of transfer of chemical technology, focused on a methodological cycle first run, based primarily on the research-action method. Future research is expected to make a refinement of the criteria from the formulation and validation of metrics so that necessary adjustments are made to optimize the process of transfer of chemical technology.

  18. Radium in consumer products: an historical perspective

    International Nuclear Information System (INIS)

    Holm, W.M.

    1978-01-01

    This paper demonstrates in historical and technical perspective how radium began to be used in consumer products and how changing conditions in technology and regulations have greatly modified the use of radium. In addition, the various uses of radium that have been tried or have been used in consumer products have been described, and whenever possible, the historical perspective has been used to show when devices were needed and when changing conditions caused the products to be no longer required. The historical perspective attitude is again used in the evaluation of the risks and benefits of radium in comparison to radium substitutes

  19. Annual Science and Engineering Technology Conference/DOD Technology Exposition (7th). Volume 2. Wednesday - Thursday

    Science.gov (United States)

    2006-04-20

    Disruptive Technologies • Army Approach to Disruptive Technologies and Transition Mr. Dennis Schmidt, Director, Science & Technology Integration, Office of...the Assistant Secretary of the Army for Research and Technology • Navy Approach to Disruptive Technologies and Transition Mr. Lewis DeSandre, Program...Manager, ONR 351 • Air Force Approach to Disruptive Technologies and Transition Colonel Mark Stephen, Associate Deputy Assistant Secretary (Science

  20. Macrofoundation for Strategic Technology Management

    DEFF Research Database (Denmark)

    Pedersen, Jørgen Lindgaard

    1995-01-01

    Neoclassical mainstream economics has no perspective on strategic technology management issues. Market failure economics (externalities etc.)can be of some use to analyze problems of relevance in strategic management problems with technology as a part. Environment, inequality and democratic...... deficits are important problems today...

  1. Solid state laser technology - A NASA perspective

    Science.gov (United States)

    Allario, F.

    1985-01-01

    NASA's program for developing solid-state laser technology and applying it to the Space Shuttle and Space Platform is discussed. Solid-state lasers are required to fulfill the Earth Observation System's requirements. The role of the Office of Aeronautics and Space Technology in developing a NASA tunable solid-state laser program is described. The major goals of the program involve developing a solid-state pump laser in the green, using AlGaAs array technology, pumping a Nd:YAG/SLAB crystal or glass, and fabricating a lidar system, with either a CO2 laser at 10.6 microns or a Nd:YAG laser at 1.06 microns, to measure tropospheric winds to an accuracy of + or - 1 m/s and a vertical resolution of 1 km. The procedures to be followed in order to visualize this technology plan include: (1) material development and characterization, (2) laser development, and (3) implementation of the lasers.

  2. Perspectives and problems of application of the effects of ionizing radiation in water treatment technology in Czechoslovakia

    International Nuclear Information System (INIS)

    Vacek, K.

    1978-01-01

    Investigations of the possibilities of the utilization of physico-chemical and biological effects of ionizing radiation in water treatment technology has been carried out in Czechoslovakia since 1976. In the area of water sources the radiation recovery of wells clogged with Fe(III) hydroxyoxides as a result of activity of some microorganism begins to be used. Other possible methods of the application of ionizing radiation as increase of disinfection efficiency of chlorination during irradiation, radiation deodorization and discoloration of drinking water are not utilized for economic reasons. In the area of waste water the radiation destruction of solution of some dyestuffs in the presence of charcoal was investigated. This process is complicated and cannot compete with current technologies. Radiation hygienization of sewage sludge with their perspective utilization as fertilizers was also investigated. At present a part of sewage sludge is agrotechnically used, yet with various restrictions. Technical and economic analysis showed that hygienization using electron accelerators would be very desirable as soon as renewed hygienic regulations of sludge depositions become valid. (Auth.)

  3. Emerging memory technologies design, architecture, and applications

    CERN Document Server

    2014-01-01

    This book explores the design implications of emerging, non-volatile memory (NVM) technologies on future computer memory hierarchy architecture designs. Since NVM technologies combine the speed of SRAM, the density of DRAM, and the non-volatility of Flash memory, they are very attractive as the basis for future universal memories. This book provides a holistic perspective on the topic, covering modeling, design, architecture and applications. The practical information included in this book will enable designers to exploit emerging memory technologies to improve significantly the performance/power/reliability of future, mainstream integrated circuits. • Provides a comprehensive reference on designing modern circuits with emerging, non-volatile memory technologies, such as MRAM and PCRAM; • Explores new design opportunities offered by emerging memory technologies, from a holistic perspective; • Describes topics in technology, modeling, architecture and applications; • Enables circuit designers to ex...

  4. Which User of technology? Perspectivising the UTAUT model by application of the SFL language Pronoun System towards a systems perspective of technology acceptance and use

    Directory of Open Access Journals (Sweden)

    Cheryl Marie Cordeiro

    2018-04-01

    Full Text Available This study applies systemic functional linguistics (SFL as complementary framework of analysis of technology acceptance models (TAMs. The purpose is to bridge research methodology language in international business (IB studies and engineering management science. Currently TAMs and its consolidated version, the Unified Theory of Acceptance and Use of Technology (UTAUT provides for a typology of one user in one context scenario. The need for the UTAUT model to account for multiple users in multiple work contexts in a single framework of analysis was foregrounded in the study of the workflow processes of a remote services business model of a European founded multinational business enterprise (MBE with regards to its (i intra-firm improvements in managing remote services cases, and its (ii extra-firm selling of life cycle management remote services contracts. The Enterprise has global operations in over 100 countries, of which this study focused on its European operations of improving the quality of remote services for the marine industry. Through an application of SFL unto UTAUT, this study illustrates how multiple users in multiple contexts can be analysed simultaneously, and whose behaviours can be accounted for in a single framework of analysis. The combined SFL UTAUT model addresses the initial statisticity of the UTAUT model, whilst at the same time, expands upon current theoretical perspectives of technology use and acceptance that can be applied in practice.

  5. Developments and innovation in carbon dioxide (CO{sub 2}) capture and storage technology. Volume 1: carbon dioxide (CO{sub 2}) capture, transport and industrial applications

    Energy Technology Data Exchange (ETDEWEB)

    Mercedes Maroto-Valer, M. (ed.)

    2010-07-01

    This volume initially reviews the economics, regulation and planning of CCS for power plants and industry, and goes on to explore developments and innovation in post- and pre-combustion and advanced combustion processes and technologies for CO{sub 2} capture in power plants. This coverage is extended with sections on CO{sub 2} compression, transport and injection and industrial applications of CCS technology, including in the cement and concrete and iron and steel industries.

  6. University of New Mexico Working Papers in Linguistics, Volume 1.

    Science.gov (United States)

    Meehan, Teresa M., Ed.; Schwenter, Scott A., Ed.

    This volume contains working papers on a variety of topics in linguistics. They include: "A View of Phonology from a Cognitive and Functional Perspective" (Joan Bybee); "The Geography of Language Shift: Distance from the Mexican Border and Spanish Language Claiming in the Southwestern United States" (Garland D. Bills, Eduardo…

  7. Integrating mHealth at point of care in low- and middle-income settings: the system perspective.

    Science.gov (United States)

    Wallis, Lee; Blessing, Paul; Dalwai, Mohammed; Shin, Sang Do

    2017-06-01

    While the field represents a wide spectrum of products and services, many aspects of mHealth have great promise within resource-poor settings: there is an extensive range of cheap, widely available tools which can be used at the point of care delivery. However, there are a number of conditions which need to be met if such solutions are to be adequately integrated into existing health systems; we consider these from regulatory, technological and user perspectives. We explore the need for an appropriate legislative and regulatory framework, to avoid 'work around' solutions, which threaten patient confidentiality (such as the extensive use of instant messaging services to deliver sensitive clinical information and seek diagnostic and management advice). In addition, we will look at other confidentiality issues such as the need for applications to remove identifiable information (such as photos) from users' devices. Integration is dependent upon multiple technological factors, and we illustrate these using examples such as products made available specifically for adoption in low- and middle-income countries. Issues such as usability of the application, signal loss, data volume utilization, need to enter passwords, and the availability of automated or in-app context-relevant clinical advice will be discussed. From a user perspective, there are three groups to consider: experts, front-line clinicians, and patients. Each will accept, to different degrees, the use of technology in care - often with cultural or regional variation - and this is central to integration and uptake. For clinicians, ease of integration into daily work flow is critical, as are familiarity and acceptability of other technology in the workplace. Front-line staff tend to work in areas with more challenges around cell phone signal coverage and data availability than 'back-end' experts, and the effect of this is discussed.

  8. Assistive technology and people: a position paper from the first global research, innovation and education on assistive technology (GREAT) summit.

    Science.gov (United States)

    Desmond, Deirdre; Layton, Natasha; Bentley, Jacob; Boot, Fleur Heleen; Borg, Johan; Dhungana, Bishnu Maya; Gallagher, Pamela; Gitlow, Lynn; Gowran, Rosemary Joan; Groce, Nora; Mavrou, Katerina; Mackeogh, Trish; McDonald, Rachael; Pettersson, Cecilia; Scherer, Marcia

    2018-05-17

    Assistive technology (AT) is a powerful enabler of participation. The World Health Organization's Global Collaboration on Assistive Technology (GATE) programme is actively working towards access to assistive technology for all. Developed through collaborative work as a part of the Global Research, Innovation and Education on Assistive Technology (GREAT) Summit, this position paper provides a "state of the science" view of AT users, conceptualized as "People" within the set of GATE strategic "P"s. People are at the core of policy, products, personnel and provision. AT is an interface between the person and the life they would like to lead. People's preferences, perspectives and goals are fundamental to defining and determining the success of AT. Maximizing the impact of AT in enabling participation requires an individualized and holistic understanding of the value and meaning of AT for the individual, taking a universal model perspective, focusing on the person, in context, and then considering the condition and/or the technology. This paper aims to situate and emphasize people at the centre of AT systems: we highlight personal meanings and perspectives on AT use and consider the role of advocacy, empowerment and co-design in developing and driving AT processes.

  9. Ethno-Confessional Realities in the Romanian Area: Historical Perspectives (XVIII-XX centuries)

    OpenAIRE

    Brie, Mircea; Şipoş, Sorin; Horga, Ioan

    2011-01-01

    Ethno-Confessional Realities in the Romanian Area: Historical Perspectives (XVII-XX Centuries) This present collective volume, coordinated by Mircea Brie, Sorin Şipoş and Ioan Horga, contains the papers of the international conference Ethnicity, Confession and Intercultural Dialogue at the European Union’s East Border (workshop: Ethno-Confessional Realities in the Romanian Area: Historical Perspectives), held in Oradea between 2nd-5th of June 2011. This international conference, organized...

  10. Network externality perspective of feed-in-tariffs (FIT) instruments-Some observations and suggestions

    International Nuclear Information System (INIS)

    Shum, Kwok L.; Watanabe, Chihiro

    2010-01-01

    Existing energy policy frameworks revolving around the acceleration of deployment of renewable energy technology can be broadly classified as the quantity vs. price approach. With this brief viewpoint, this paper suggests another perspective of viewing these instruments in terms of a more fundamental basis: whether the deployment in capacity is in terms of a cost minimization approach or a network externality approach. We suggest that the generic price or feed in tariff (FIT) approach in subsidizing renewable electricity generation and associated income would create a bandwagon or self-propagation effect among users rendering the renewable energy technology spreads like a software or information technology. Our objective is to raise awareness of this technology dynamics oriented perspective in renewable deployment supplementing the conventional installation subsidies perspective. We hope that it would inspire more empirical works and studies relating to the policy implications of this viewpoint.

  11. Ethical Considerations in Technology Transfer.

    Science.gov (United States)

    Froehlich, Thomas J.

    1991-01-01

    Examines ethical considerations involved in the transfer of appropriate information technology to less developed countries. Approaches to technology are considered; two philosophical frameworks for studying ethical considerations are discussed, i.e., the Kantian approach and the utilitarian perspective by John Stuart Mill; and integration of the…

  12. Success in nuclear technology transfer: A Canadian perspective

    International Nuclear Information System (INIS)

    Lawson, D.S.; Stevens, J.E.S.; Boulton, J.

    1986-10-01

    Technology transfer has played a significant part in the expansion of nuclear power to many countries of the world. Canada's involvement in nuclear technology transfer spans four decades. The experience gained through technology transfer, initially to Canadian industry and then to other countries in association with the construction of CANDU nuclear power plants, forms a basis from which to assess the factors which contribute to successful technology transfer. A strong commitment from all parties, in terms of both financial and human resources, is essential to success. Detailed planning of both the scope and timing of the technology transfer program is also required together with an assessment of the impact of the introduction of nuclear power on other sectors of the economy. (author)

  13. The Spanish technology transfer. Diagnostic and perspectives

    International Nuclear Information System (INIS)

    Rodriguez Pomeda, J.; Casani Fernandez de Navarrete, F.

    2007-01-01

    After a non exhaustive literature review of technology transfer in Spain, the authors offer a synthetic view of it. The main aspects reviewed are as follows: general ideas on technology transfer and their links with universities third mission; obstacles and success factors, and, lastly, support structures and transfer tools. (Author) 58 refs

  14. Living Technology

    DEFF Research Database (Denmark)

    2010-01-01

    This book is aimed at anyone who is interested in learning more about living technology, whether coming from business, the government, policy centers, academia, or anywhere else. Its purpose is to help people to learn what living technology is, what it might develop into, and how it might impact...... our lives. The phrase 'living technology' was coined to refer to technology that is alive as well as technology that is useful because it shares the fundamental properties of living systems. In particular, the invention of this phrase was called for to describe the trend of our technology becoming...... increasingly life-like or literally alive. Still, the phrase has different interpretations depending on how one views what life is. This book presents nineteen perspectives on living technology. Taken together, the interviews convey the collective wisdom on living technology's power and promise, as well as its...

  15. Draft Site Treatment Plan (DSTP), Volumes I and II

    International Nuclear Information System (INIS)

    D'Amelio, J.

    1994-01-01

    Site Treatment Plans (STP) are required for facilities at which the DOE generates or stores mixed waste. This Draft Site Treatment Plan (DSTP) the second step in a three-phase process, identifies the currently preferred options for treating mixed waste at the Savannah River Site (SRS) or for developing treatment technologies where technologies do not exist or need modification. The DSTP reflects site-specific preferred options, developed with the state's input and based on existing available information. To the extent possible, the DSTP identifies specific treatment facilities for treating the mixed waste and proposes schedules. Where the selection of specific treatment facilities is not possible, schedules for alternative activities such as waste characterization and technology assessment are provided. All schedule and cost information presented is preliminary and is subject to change. The DSTP is comprised of two volumes: this Compliance Plan Volume and the Background Volume. This Compliance Plan Volume proposes overall schedules with target dates for achieving compliance with the land disposal restrictions (LDR) of RCRA and procedures for converting the target dates into milestones to be enforced under the Order. The more detailed discussion of the options contained in the Background Volume is provided for informational purposes only

  16. Problem Solving in Technology Education: A Taoist Perspective.

    Science.gov (United States)

    Flowers, Jim

    1998-01-01

    Offers a new approach to teaching problem solving in technology education that encourages students to apply problem-solving skills to improving the human condition. Suggests that technology teachers incorporate elements of a Taoist approach in teaching by viewing technology as a tool with a goal of living a harmonious life. (JOW)

  17. A perspective of hazardous waste and mixed waste treatment technology at the Savannah River Site

    International Nuclear Information System (INIS)

    England, J.L.; Venkatesh, S.; Bailey, L.L.; Langton, C.A.; Hay, M.S.; Stevens, C.B.; Carroll, S.J.

    1991-01-01

    Treatment technologies for the preparation and treatment of heavy metal mixed wastes, contaminated soils, and mixed mercury wastes are being considered at the Savannah River Site (SRS), a DOE nuclear material processing facility operated by Westinghouse Savannah River Company (WSRC). The proposed treatment technologies to be included at the Hazardous Waste/Mixed Waste Treatment Building at SRS are based on the regulatory requirements, projected waste volumes, existing technology, cost effectiveness, and project schedule. Waste sorting and size reduction are the initial step in the treatment process. After sorting/size reduction the wastes would go to the next applicable treatment module. For solid heavy metal mixed wastes the proposed treatment is macroencapsulation using a thermoplastic polymer. This process reduces the leachability of hazardous constituents from the waste and allows easy verification of the coating integrity. Stabilization and solidification in a cement matrix will treat a wide variety of wastes (i.e. soils, decontamination water). Some pretreatments may be required (i.e. Ph adjustment) before stabilization. Other pretreatments such as soil washing can reduce the amount of waste to be stabilized. Radioactive contaminated mercury waste at the SRS comes in numerous forms (i.e. process equipment, soils, and lab waste) with the required treatment of high mercury wastes being roasting/retorting and recovery. Any unrecyclable radioactive contaminated elemental mercury would be amalgamated, utilizing a batch system, before disposal

  18. Korean working towards low and intermediate level waste volume reduction

    International Nuclear Information System (INIS)

    Myung-Jae Song; Jong-Kil Park

    2001-01-01

    The safe management of radioactive waste is a national task required for sustainable generation of nuclear power and for energy self-reliance. This paper describes the results, efforts, and prospects for the safe management of radioactive wastes having been performed by the Nuclear Environment Technology Institute (NETEC) of the Korean Electric Power Corporation (KEPCO). Firstly, KEPCO's efforts and results for waste volume reduction are summarized to show how the number of waste drums generated per reactor-year could be reduced by about 60% during the last 10 years. Secondly, a new treatment technology, a technology for low and intermediate level waste (LILW) vitrification, was introduced to prospect how the technology reduces the waste volume and increases the inherent safety for LILW disposal. It is expected that the vitrification technology will contribute not only to reduce LILW volume to around 1/14 ∼ 1/32 but also to change the 'Not In My Back Yard' (NIMBY) syndrome to the 'Please In My Front Yard' (PIMFY) attitude of local communities/residents for LILW disposal. (author)

  19. New horizons for e-learning in medical education: ecological and Web 2.0 perspectives.

    Science.gov (United States)

    Sandars, John; Haythornthwaite, Caroline

    2007-05-01

    An ecological and a Web 2.0 perspective of e-learning provides new ways of thinking about how people learn with technology and also how new learning opportunities are offered by new technology. These perspectives highlight the importance of developing connections between a wide variety of learning resources, containing both codified and tacit knowledge. New adaptive technology has the potential to create personalized, yet collective, learning. The future implications for e-learning in medical education is considered.

  20. Emerging Technological Risk Underpinning the Risk of Technology Innovation

    CERN Document Server

    Anderson, Stuart

    2012-01-01

    Classes of socio-technical hazards allow a characterization of the risk in technology innovation and clarify the mechanisms underpinning emergent technological risk. Emerging Technological Risk provides an interdisciplinary account of risk in socio-technical systems including hazards which highlight: ·         How technological risk crosses organizational boundaries, ·         How technological trajectories and evolution develop from resolving tensions emerging between social aspects of organisations and technologies and ·         How social behaviour shapes, and is shaped by, technology. Addressing an audience from a range of academic and professional backgrounds, Emerging Technological Risk is a key source for those who wish to benefit from a detail and methodical exposure to multiple perspectives on technological risk. By providing a synthesis of recent work on risk that captures the complex mechanisms that characterize the emergence of risk in technology innovation, Emerging Tec...

  1. HARNESSING BIG DATA VOLUMES

    Directory of Open Access Journals (Sweden)

    Bogdan DINU

    2014-04-01

    Full Text Available Big Data can revolutionize humanity. Hidden within the huge amounts and variety of the data we are creating we may find information, facts, social insights and benchmarks that were once virtually impossible to find or were simply inexistent. Large volumes of data allow organizations to tap in real time the full potential of all the internal or external information they possess. Big data calls for quick decisions and innovative ways to assist customers and the society as a whole. Big data platforms and product portfolio will help customers harness to the full the value of big data volumes. This paper deals with technical and technological issues related to handling big data volumes in the Big Data environment.

  2. Hazardous air pollutant emissions from process units in the synthetic organic chemical manufacturing industry: Background information for proposed standards. Volume 1B. Control technologies. Draft report

    International Nuclear Information System (INIS)

    1992-11-01

    A draft rule for the regulation of emissions of organic hazardous air pollutants (HAP's) from chemical processes of the synthetic organic chemical manufacturing industry (SOCMI) is being proposed under the authority of Sections 112, 114, 116, and 301 of the Clean Air Act, as amended in 1990. The volume of the Background Information Document presents discussions of control technologies used in the industry and the costs of those technologies

  3. Is lactate a volume transmitter of metabolic states of the brain?

    DEFF Research Database (Denmark)

    Bergersen, Linda H; Gjedde, Albert

    2012-01-01

    We present the perspective that lactate is a volume transmitter of cellular signals in brain that acutely and chronically regulate the energy metabolism of large neuronal ensembles. From this perspective, we interpret recent evidence to mean that lactate transmission serves the maintenance...... of network metabolism by two different mechanisms, one by regulating the formation of cAMP via the lactate receptor GPR81, the other by adjusting the NADH/NAD(+) redox ratios, both linked to the maintenance of brain energy turnover and possibly cerebral blood flow. The role of lactate as mediator...

  4. Chiral crossover transition in a finite volume

    Science.gov (United States)

    Shi, Chao; Jia, Wenbao; Sun, An; Zhang, Liping; Zong, Hongshi

    2018-02-01

    Finite volume effects on the chiral crossover transition of strong interactions at finite temperature are studied by solving the quark gap equation within a cubic volume of finite size L. With the anti-periodic boundary condition, our calculation shows the chiral quark condensate, which characterizes the strength of dynamical chiral symmetry breaking, decreases as L decreases below 2.5 fm. We further study the finite volume effects on the pseudo-transition temperature {T}{{c}} of the crossover, showing a significant decrease in {T}{{c}} as L decreases below 3 fm. Supported by National Natural Science Foundation of China (11475085, 11535005, 11690030, 51405027), the Fundamental Research Funds for the Central Universities (020414380074), China Postdoctoral Science Foundation (2016M591808) and Open Research Foundation of State Key Lab. of Digital Manufacturing Equipment & Technology in Huazhong University of Science & Technology (DMETKF2015015)

  5. Social shaping of technology in TA and HTA

    DEFF Research Database (Denmark)

    Clausen, Christian; Yoshinaka, Yutaka

    2004-01-01

    The paper discusses how the social shaping of technology (SST) approach may be useful in understanding the role played by technology assessment within the context of technological development and change. It is proposed that an SST perspective on TA (or HTA) yields particular insight, regardless...... of whether or not the TA activity bases itself on a social shaping understanding of technology. This is because SST addresses the socially negotiated character of technological development, where TA itself may be construed as an element influencing the process of such negotiation. At the same time, TA...... is a construction, that is, itself a product of negotiations involving social actors. Thus, an understanding that TA is socially shaped, and is involved in the shaping of technology, opens up for a perspective on TA as both entailing constraints and enablements within the context of the particular agenda...

  6. New technology in everyday life - social processes and environmental impact

    DEFF Research Database (Denmark)

    Røpke, Inge

    2001-01-01

    aspect both of changes in everyday life and of the environmental impact of everyday-life activities. Technological change is often seen as an important part of the solutions to environmental problems, however, when technological change is seen from the perspective of everyday life, this image becomes...... more complex. In this paper technological changes are explored from the perspective of consumption and everyday life, and it is argued that environmental impacts arise through the interplay of technology, consumption and everyday life. Firstly, because technological renewals form integral parts...... influence the environment in the long run. The paper points to the need for further studies of the long term interplay between new technologies, everyday life and the environment....

  7. Oak Ridge K-25 Site Technology Logic Diagram

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. (ed.)

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. This Volume, Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This volume is divided into ten chapters. The first chapter is a brief introduction, and the second chapter details the technical approach of the TLD. These categories are the work activities necessary for successful decontamination and decommissioning, waste management, and remedial action of the K-25 Site. The categories are characterization, decontamination, dismantlement, robotics and automation, remedial action, and waste management. Materials disposition is addressed in Chap. 9. The final chapter contains regulatory compliance information concerning waste management, remedial action, and decontamination and decommissioning.

  8. 1995 national heat transfer conference: Proceedings. Volume 12: Falling films; Fundamentals of subcooled flow boiling; Compact heat exchanger technology for the process industry; HTD-Volume 314

    International Nuclear Information System (INIS)

    Sernas, V.; Boyd, R.D.; Jensen, M.K.

    1995-01-01

    The papers in the first section cover falling films and heat transfer. Papers in the second section address issues associated with heat exchangers, such as: plate-and-frame heat exchanger technology; thermal design issues; condensation; and single-phase flows. The papers in the third section deal with studies related to: the turbulent velocity field in a vertical annulus; the effects of curvature and a dissolved noncondensable gas on nucleate boiling heat transfer; the effects of flow obstruction on the onset of a Ledinegg-type flow instability; pool boiling from a large-diameter tube; and two-dimensional wall temperature distributions and convection in a single-sided heated vertical tube. Separate abstracts were prepared for most papers in this volume

  9. If It's Neutral, It's Not Technology

    Science.gov (United States)

    Strate, Lance

    2012-01-01

    Taking a media ecology perspective, this article argues that technology cannot be neutral, because it is a form of change, and it has an inherent bias based on the properties of its materials and methods. Additionally, the application of a technology is an intrinsic part of the technology itself, as is technique, instructions, software, or…

  10. NATO Conference on Work, Organizations, and Technological Change

    CERN Document Server

    Niehaus, Richard

    1982-01-01

    This volume is the proceedings of the Symposium entitled, "Work, Organizations and Technological Change" which was held in Garmisch-Partenkirchen, West Germany, 14-19 June 1981. The meeting was sponsored by the Special Panel on Systems Sciences of the NATO Scientific Affairs Division. In proposing this meeting the Symposium Directors built upon several preceding NATO conferences in the general area of personnel systems, manpower modelling, and organization. The most recent NATO Conference, entitled "Manpower Planning and Organization Design," was held in Stresa, Italy in 1977. That meeting was organized to foster research on the interrelationships between programmatic approaches to personnel planning within organizations and behavioral science approachs to organization design. From that context of corporate planning the total internal organizational perspective was the MACRO view, and the selection, assignment, care and feeding of the people was the MICRO view. Conceptually, this meant that an integrated appr...

  11. Precision engineering: an evolutionary perspective.

    Science.gov (United States)

    Evans, Chris J

    2012-08-28

    Precision engineering is a relatively new name for a technology with roots going back over a thousand years; those roots span astronomy, metrology, fundamental standards, manufacturing and money-making (literally). Throughout that history, precision engineers have created links across disparate disciplines to generate innovative responses to society's needs and wants. This review combines historical and technological perspectives to illuminate precision engineering's current character and directions. It first provides us a working definition of precision engineering and then reviews the subject's roots. Examples will be given showing the contributions of the technology to society, while simultaneously showing the creative tension between the technological convergence that spurs new directions and the vertical disintegration that optimizes manufacturing economics.

  12. Definition of technology development missions for early Space Station satellite servicing. Volume 1: Executive summary

    Science.gov (United States)

    1984-01-01

    The Executive Summary volume 1, includes an overview of both phases of the Definition of Technology Development Missions for Early Space Station Satellite Servicing. The primary purpose of Phase 1 of the Marshall Space Flight Center (MSFC) Satellite Servicing Phase 1 study was to establish requirements for demonstrating the capability of performing satellite servicing activities on a permanently manned Space Station in the early 1990s. The scope of Phase 1 included TDM definition, outlining of servicing objectives, derivation of initial Space Station servicing support requirements, and generation of the associated programmatic schedules and cost. The purpose of phase 2 of the satellite servicing study was to expand and refine the overall understanding of how best to use the manned space station as a test bed for demonstration of satellite servicing capabilities.

  13. Science and Technology as Social Relations: Towards a Philosophy of Technology for Liberal Education.

    Science.gov (United States)

    Hansen, Klaus-Henning

    1997-01-01

    Raises the question of the philosophical base of a liberal technology education, assuming that it cannot be provided simply by an engineer's perspective. Suggests a series of questions for reconstructing the cultural meaning of technology and a structural model that shows how meaning is generated through a variety of social relationships;…

  14. Optimal models of extreme volume-prices are time-dependent

    International Nuclear Information System (INIS)

    Rocha, Paulo; Boto, João Pedro; Raischel, Frank; Lind, Pedro G

    2015-01-01

    We present evidence that the best model for empirical volume-price distributions is not always the same and it strongly depends in (i) the region of the volume-price spectrum that one wants to model and (ii) the period in time that is being modelled. To show these two features we analyze stocks of the New York stock market with four different models: Γ, Γ-inverse, log-normal, and Weibull distributions. To evaluate the accuracy of each model we use standard relative deviations as well as the Kullback-Leibler distance and introduce an additional distance particularly suited to evaluate how accurate are the models for the distribution tails (large volume-price). Finally we put our findings in perspective and discuss how they can be extended to other situations in finance engineering

  15. Beauty and health: anthropological perspectives

    NARCIS (Netherlands)

    Edmonds, A.

    2008-01-01

    This essay, written as a 'teaser' for an up-coming symposium, reflects on how human beauty can be understood from an anthropological and medical anthropological perspective. First, it considers how aesthetic and healing rationales can conflict or merge in a variety of medical technologies and health

  16. The future role of photovoltaics: A learning curve versus portfolio perspective

    International Nuclear Information System (INIS)

    Albrecht, Johan

    2007-01-01

    The current cost disadvantage of photovoltaics (PV) risks to reduce its relevance in climate policy strategies. Depending on the used assumptions, electricity from PV can become competitive between 2015 and 2040. Cost competitiveness is, however, a conditional criterion and as an alternative to the learning curve perspective, the future role of PV in electricity production is assessed from a portfolio theory or Capital Asset Pricing Model perspective. In this analysis, the focus is on the input price risks. Fossil fuel price volatility can strongly reduce the financial return of conventional generating technologies. From a welfare perspective, energy planners should try to minimise this risk by adding risk-neutral or no-risk technologies to their portfolio. With an analysis for the year 2025, we illustrate how the addition of renewable capacity to an existing portfolio can lower total portfolio risk without a significant reduction of profitability. PV then emerges as an attractive technology, especially once the best locations for wind energy are already developed

  17. The future role of photovoltaics: a learning curve versus portfolio perspective

    International Nuclear Information System (INIS)

    Albrecht, J.

    2007-01-01

    The current cost disadvantage of photovoltaics (PV) risks to reduce its relevance in climate policy strategies. Depending on the used assumptions, electricity from PV can become competitive between 2015 and 2040. Cost competitiveness is, however, a conditional criterion and as an alternative to the learning curve perspective, the future role of PV in electricity production is assessed from a portfolio theory or Capital Asset Pricing Model perspective. In this analysis, the focus is on the input price risks. Fossil fuel price volatility can strongly reduce the financial return of conventional generating technologies. From a welfare perspective, energy planners should try to minimise this risk by adding risk-neutral or no-risk technologies to their portfolio. With an analysis for the year 2025, we illustrate how the addition of renewable capacity to an existing portfolio can lower total portfolio risk without a significant reduction of profitability. PV then emerges as an attractive technology, especially once the best locations for wind energy are already developed. (author)

  18. Robot, Eye, and ROI: Technology Transformation Versus Technology Transfer

    OpenAIRE

    Sacerdoti, Earl

    1985-01-01

    I want to discuss two aspects of technology transfer. First I've been asked to present a brief perspective on how AI is fitting into a particular application area: Industrial automation. Then I want to give my two cents worth on AI as a business activity.

  19. A CHAT Perspective on Mobile Technology in Education

    DEFF Research Database (Denmark)

    Stenild, Kåre; Iversen, Ole Sejer

    The body of research within the design of mobile technology for use in k-12 education has primarily focused on the features and thereby new options that are brought about when utilizing mobile technologies in education. However, the theoretical concern for mobile technology’s effect on the child......’s development is not yet fully covered. In this paper we argue that mobile technology is a valuable resource in K-12 education. Based on CHAT theory, we argue that mobile technology potentially mediates subject matter knowledge and everyday knowledge and thereby supports the child to acquire valuable......Bag) in a participatory design context involving both teachers and students in the process. A four-month evaluation of the final version of the eBag was conducted to make a preliminary evaluation of the possibilities of mobile supported education. The result of this preliminary evaluation indicates that mobile technology...

  20. Dreams, themes and particle beams--an oncologist's perspective on technology trickle-down from the LHC.

    Science.gov (United States)

    Jena, R

    2014-04-01

    11 years ago, the European Network for Light Ion Therapy (ENLIGHT) was established as a multidisciplinary network of engineers, physicists and clinicians with a common interest in the development of hadron therapy in Europe. ENLIGHT is coordinated from the European Centre for Nuclear Research (CERN), the home of the Large Hadron Collider. The network has evolved into a mature platform for research, with more than 100 researchers working in CERN and its allied research centres. One of the benefits of hosting this network at CERN is the ability to translate hardware and software developments, originally developed in the High Energy Physics domain, into clinical applications. From the perspective of a clinical radiation oncologist within the network, this commentary reviews the ways in which leading edge technological developments in detectors and solid state physics, Monte-Carlo simulation, grid computing and accelerator design have trickled down into real-world clinical applications.

  1. Evolution of Indoor Positioning Technologies: A Survey

    Directory of Open Access Journals (Sweden)

    Ramon F. Brena

    2017-01-01

    Full Text Available Indoor positioning systems (IPS use sensors and communication technologies to locate objects in indoor environments. IPS are attracting scientific and enterprise interest because there is a big market opportunity for applying these technologies. There are many previous surveys on indoor positioning systems; however, most of them lack a solid classification scheme that would structurally map a wide field such as IPS, or omit several key technologies or have a limited perspective; finally, surveys rapidly become obsolete in an area as dynamic as IPS. The goal of this paper is to provide a technological perspective of indoor positioning systems, comprising a wide range of technologies and approaches. Further, we classify the existing approaches in a structure in order to guide the review and discussion of the different approaches. Finally, we present a comparison of indoor positioning approaches and present the evolution and trends that we foresee.

  2. Waste to energy the carbon perspective

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Damgaard, Anders; Astrup, Thomas Fruergaard

    2015-01-01

    Waste to energy plants are key treatment facilities for municipal solid waste in Europe. The technology provides efficient volume reduction, mass reduction and hygienisation of the waste. However, the technology is highly disputed in some countries. It is crucial to understand the role of waste...

  3. Volume Reduction of Decommissioning Radioactive Burnable and Metal Wastes

    Energy Technology Data Exchange (ETDEWEB)

    Min, B. Y.; Lee, Y. J.; Yun, G. S.; Lee, K. W.; Moon, J. K. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Choi, Y. K.; Cho, J. H. [SunKwang Atomic Energy Safety Co., Seoul (Korea, Republic of)

    2014-10-15

    A large quantity of radioactive waste was generated during the decommissioning projects. For the purpose of the volume reduction and clearance for decommissioning wastes from decommissioning projects, the incineration and high melting technology has been selected for the decommissioning wastes treatment. The volume reduction of the combustible wastes through the incineration technologies has merits from the view point of a decrease in the amount of waste to be disposed of resulting in a reduction of the disposal cost. Incineration is generally accepted as a method of reducing the volume of radioactive waste. The incineration technology is an effective treatment method that contains hazardous chemicals as well as radioactive contamination. Incinerator burns waste at high temperature. Incineration of a mixture of chemically hazardous and radioactive materials, known as 'mixed waste,' has two principal goals: to reduce the volume and total chemical toxicity of the waste. Incineration itself does not destroy the metals or reduce the radioactivity of the waste. A proven melting technology is currently used for low-level waste (LLW) at several facilities worldwide. These facilities use melting as a means of processing LLW for unrestricted release of the metal or for recycling within the nuclear sector. About 16.4 tons of decommissioning combustible waste has been treated using Oxygen Enriched incineration. The incineration facility operated quite smoothly through the analysis major critical parameters of off-gas.

  4. Volume Reduction of Decommissioning Radioactive Burnable and Metal Wastes

    International Nuclear Information System (INIS)

    Min, B. Y.; Lee, Y. J.; Yun, G. S.; Lee, K. W.; Moon, J. K.; Choi, Y. K.; Cho, J. H.

    2014-01-01

    A large quantity of radioactive waste was generated during the decommissioning projects. For the purpose of the volume reduction and clearance for decommissioning wastes from decommissioning projects, the incineration and high melting technology has been selected for the decommissioning wastes treatment. The volume reduction of the combustible wastes through the incineration technologies has merits from the view point of a decrease in the amount of waste to be disposed of resulting in a reduction of the disposal cost. Incineration is generally accepted as a method of reducing the volume of radioactive waste. The incineration technology is an effective treatment method that contains hazardous chemicals as well as radioactive contamination. Incinerator burns waste at high temperature. Incineration of a mixture of chemically hazardous and radioactive materials, known as 'mixed waste,' has two principal goals: to reduce the volume and total chemical toxicity of the waste. Incineration itself does not destroy the metals or reduce the radioactivity of the waste. A proven melting technology is currently used for low-level waste (LLW) at several facilities worldwide. These facilities use melting as a means of processing LLW for unrestricted release of the metal or for recycling within the nuclear sector. About 16.4 tons of decommissioning combustible waste has been treated using Oxygen Enriched incineration. The incineration facility operated quite smoothly through the analysis major critical parameters of off-gas

  5. Clean Coal Technology Programs: Completed Projects (Volume 2)

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2003-12-01

    Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  6. Topology as fluid geometry two-dimensional spaces, volume 2

    CERN Document Server

    Cannon, James W

    2017-01-01

    This is the second of a three volume collection devoted to the geometry, topology, and curvature of 2-dimensional spaces. The collection provides a guided tour through a wide range of topics by one of the twentieth century's masters of geometric topology. The books are accessible to college and graduate students and provide perspective and insight to mathematicians at all levels who are interested in geometry and topology. The second volume deals with the topology of 2-dimensional spaces. The attempts encountered in Volume 1 to understand length and area in the plane lead to examples most easily described by the methods of topology (fluid geometry): finite curves of infinite length, 1-dimensional curves of positive area, space-filling curves (Peano curves), 0-dimensional subsets of the plane through which no straight path can pass (Cantor sets), etc. Volume 2 describes such sets. All of the standard topological results about 2-dimensional spaces are then proved, such as the Fundamental Theorem of Algebra (two...

  7. M-Commerce: Global Experiences and Perspectives

    DEFF Research Database (Denmark)

    Dholakia, Nikhilesh; Rask, Morten; Dholakia, Ruby

    -Pacific - and highlights several countries from each region. These countries are significant because of their large existing base of mobile telecom users, their future potential, their innovativeness in mobile telecom technology development, and their leadership in launching new mobile applications. M-Commerce: Global...... Experiences and Perspectives contains chapters from authors of many countries, and while each chapter examines a specific country in-depth, all the chapters use a common integrative framework called the CLIP (communications, locatability, information provision, and payment processing) application......M-Commerce: Global Experiences and Perspectives focuses on the emerging growth of mobile telecommunications and mobile commerce around the world. To provide a global perspective, this book describes approaches from three major regions of the world - North America, Europe, and Asia...

  8. Nanomanufacturing-Perspective and applications

    DEFF Research Database (Denmark)

    Fang, F. Z.; Zhang, X. D.; Gao, W.W.

    2017-01-01

    . These include a cluster of various techniques such as nanomachining, nanofabrication, and nanometrology to produce nanotechnology components and conduct evaluation. This paper mainly focuses on the manufacturing methods for complex shapes or structures, such as textures on curves and hierarchical structures......, and outlines the research perspectives and the current application status of nanomanufacturing fundamentals and key technologies....

  9. The use of modern information technology in research on transport accessibility

    Directory of Open Access Journals (Sweden)

    Bartosz BARTOSIEWICZ

    2015-09-01

    Full Text Available Transport accessibility can be analyzed using a number of different methods. The problem with each of them is the difficulty of obtaining data to measure this phenomenon The focus of this article and its main goal are to present methods and tools for gathering data on road traffic; thanks to modern information technology, it is possible to collect real data without the need for large-scale and highly capital-intensive measurements. The application of modern information technology (IT presented in the article, such as computer programs and applications like Google Maps Traffic Overlay and TomTom Live Traffic, enable research to be conducted on a scale that has thus far been unattainable, and allows information to be collected on such criteria as traffic volume, flow, average traffic speed, and actual journey time. Such innovative means of gathering data on automobile traffic open up new perspectives for assessing transport accessibility in terms of automobile traffic by providing high-quality data that meet the requirements for use in primary research.

  10. Perspectives in understanding open access to research data - infrastructure and technology challenges

    Science.gov (United States)

    Bigagli, Lorenzo; Sondervan, Jeroen

    2014-05-01

    will contribute to shape the RECODE policy guidelines for Open Access to Research Data. In the work, we report on the identified technological and infrastructural issues, classified according to the barriers of heterogeneity, sustainability, volume, quality, and security.

  11. Communities of practice: pedagogy and internet-based technologies to support educator's continuing technology professional development in higher education

    NARCIS (Netherlands)

    Maurice Schols

    2011-01-01

    Advances in information and communication technologies (ICTs) as well as modern pedagogical perspectives have created new possibilities to facilitate and support learning in higher education (HE). Emerging technologies bring opportunities to reconsider teaching and learning. New ideas and concepts

  12. Innovations in and by nuclear technology - review and perspectives

    International Nuclear Information System (INIS)

    Barthelt, K.

    1984-01-01

    An innovative technology like nuclear technology does not make progress by itself once it has to prove its profitability. It was a long way from technical to economic perfection which took courageous managemental descisions. Since nuclear fission was discovered, its exploitation as an energy source has been perfected. Now it is not only technically safe, reliable and ecological; it has also proved to be economically efficient as compared with the competing primary energies. As with other great innovations, the innovative force of nuclear technology is characterized by two directions: its assimilating capacity and its expanding capacity. Further issues are the so-called technological spin-off of nuclear technology and the fresh impetus nuclear technology gives to other fields. Another aspect beyond technological spin-off affecting all of our society: It was the first large technology requiring risk analyses to be carried out. Discussion broke out in public on the question: ''How safe is nuclear technology''. To sum up, the basic innovation of nuclear technology is now an important economic factor. It came just in time. It is capable of providing relief to the world's energy problems. It is up to us to use it in an intelligent way in the future despite any short-breathed complaints. (orig./HSCH) [de

  13. Perspectives of New Trades Tutors: Boundary Crossing between Vocational Identities

    Science.gov (United States)

    Chan, Selena

    2012-01-01

    This article reports on a study of the perspectives of new tutors teaching traditional vocational trades who recently commenced teaching in the Institutes of Technologies and Polytechnics (ITPs) sector in New Zealand. The perspectives are collated from questionnaires and interviews of 13 tutors, from five ITPs, who have been teaching full-time for…

  14. Students’ Information Literacy: A Perspective from Mathematical Literacy

    OpenAIRE

    Ariyadi Wijaya

    2016-01-01

    Information literacy is mostly seen from the perspective of library science or information and communication technology. Taking another point of view, this study was aimed to explore students’ information literacy from the perspective of mathematical literacy. For this purpose, a test addressing Programme for International Student Assessment (PISA) mathematics tasks were administered to 381 eighth and ninth graders from nine junior high schools in the Province of Yogyakarta. PISA mathematics ...

  15. Health Educational Potentials of Technologies.

    OpenAIRE

    Magnussen, Rikke; Aagaard-Hansen, Jens

    2012-01-01

    The field of health promotion technology has been in an exponential growth in recent years and smart phone applications, exer-games and self-monitoring devices has become part of fitness activities and health education. In this work-in-progress-paper theoretical perspectives for categorising and analysing health educational potentials of technologies are presented.

  16. Indian Institute of Technology, Guwahat

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 10; Issue 1. Refresher Course in Experimental Physics – Indian Institute of Technology, ... Information and Announcements Volume 10 Issue 1 January 2005 pp 96-96 ...

  17. Breeding research on sake yeasts in Japan: history, recent technological advances, and future perspectives.

    Science.gov (United States)

    Kitagaki, Hiroshi; Kitamoto, Katsuhiko

    2013-01-01

    ). However, technologies that enable the elimination of extraneous DNA sequences from the genome of sake yeast have been developed. Sake yeasts genetically modified with these technologies are called self-cloning yeasts and do not contain extraneous DNA sequences. These yeasts were exempted from the Japanese government's guidelines for genetically modified food. Protoplast fusion has also been utilized to breed favorable sake yeasts. Future directions for the breeding of sake yeasts are also proposed in this review. The reviewed research provides perspectives for the breeding of brewery yeasts in other fermentation industries.

  18. Support systems for the diffusion of renewable energy technologies-an investor perspective

    International Nuclear Information System (INIS)

    Dinica, Valentina

    2006-01-01

    Concern over climate change impacts and the projected depletion of fossil fuels has urged more governments to adopt policies that stimulate the diffusion of renewable energy technologies (RET). With an increasingly diverse suite of support instruments, the question emerges as to which instruments or combinations are able to achieve faster, more substantial diffusion results. Although various support instruments were extensively addressed in policy studies, there is still no consensus. This is partly because many policy studies take a policy-maker approach in comparing support instruments, leaving relationships between policy design and policy results as a black box. This paper proposes an investor-oriented perspective to analyze the diffusion potential of support systems for RET. The main argument is that it is not the type of support instrument but rather its risk/profitability characteristics that influence investor behavior and the rate of diffusion. The two instruments most frequently discussed and compared are the feed-in-tariff and the quota model. The analysis in this paper concludes that policy design is crucial: while often feed-in tariffs are applauded and quota system feared, feed-in tariffs may also bring about disappointing diffusion results when poorly designed while quota systems may be also conceived as attractive instruments for independent power producers

  19. Women Technology Leaders: Gender Issues in Higher Education Information Technology

    Science.gov (United States)

    Drury, Marilyn

    2011-01-01

    Women working in higher education information technology (IT) organizations and those seeking leadership positions in these organizations face a double challenge in overcoming the traditionally male-dominated environments of higher education and IT. Three women higher education chief information officers (CIOs) provided their perspectives,…

  20. Perspectives on the future of the electric utility industry

    International Nuclear Information System (INIS)

    Tonn, B.; Schaffhauser, A.

    1994-04-01

    This report offers perspectives on the future of the electric utility industry. These perspectives will be used in further research to assess the prospects for Integrated Resource Planning (IRP). The perspectives are developed first by examining economic, political and regulatory, societal, technological, and environmental trends that are (1) national and global in scope and (2) directly related to the electric utility industry. Major national and global trends include increasing global economic competition, increasing political and ethnic strife, rapidly changing technologies, and increasing worldwide concern about the environment. Major trends in the utility industry include increasing competition in generation; changing patterns of electricity demand; increasing use of information technology to control power systems; and increasing implementation of environmental controls. Ways in which the national and global trends may directly affect the utility industry are also explored. The trends are used to construct three global and national scenarios- ''business as usual,'' ''technotopia future,'' and ''fortress state'' -and three electric utility scenarios- ''frozen in headlights,'' ''megaelectric,'' and ''discomania.'' The scenarios are designed to be thought provoking descriptions of potential futures, not predictions of the future, although three key variables are identified that will have significant impacts on which future evolves-global climate change, utility technologies, and competition. While emphasis needs to be placed on understanding the electric utility scenarios, the interactions between the two sets of scenarios is also of interest

  1. Perspectives on the future of the electric utility industry

    Energy Technology Data Exchange (ETDEWEB)

    Tonn, B. [Oak Ridge National Lab., TN (United States); Schaffhauser, A. [Tennessee Univ., Knoxville, TN (United States)

    1994-04-01

    This report offers perspectives on the future of the electric utility industry. These perspectives will be used in further research to assess the prospects for Integrated Resource Planning (IRP). The perspectives are developed first by examining economic, political and regulatory, societal, technological, and environmental trends that are (1) national and global in scope and (2) directly related to the electric utility industry. Major national and global trends include increasing global economic competition, increasing political and ethnic strife, rapidly changing technologies, and increasing worldwide concern about the environment. Major trends in the utility industry include increasing competition in generation; changing patterns of electricity demand; increasing use of information technology to control power systems; and increasing implementation of environmental controls. Ways in which the national and global trends may directly affect the utility industry are also explored. The trends are used to construct three global and national scenarios- ``business as usual,`` ``technotopia future,`` and ``fortress state`` -and three electric utility scenarios- ``frozen in headlights,`` ``megaelectric,`` and ``discomania.`` The scenarios are designed to be thought provoking descriptions of potential futures, not predictions of the future, although three key variables are identified that will have significant impacts on which future evolves-global climate change, utility technologies, and competition. While emphasis needs to be placed on understanding the electric utility scenarios, the interactions between the two sets of scenarios is also of interest.

  2. Globalization & technology

    DEFF Research Database (Denmark)

    Narula, Rajneesh

    Technology and globalization are interdependent processes. Globalization has a fundamental influence on the creation and diffusion of technology, which, in turn, affects the interdependence of firms and locations. This volume examines the international aspect of this interdependence at two levels...... of innovation" understanding of learning. Narula and Smith reconcile an important paradox. On the one hand, locations and firms are increasingly interdependent through supranational organisations, regional integration, strategic alliances, and the flow of investments, technologies, ideas and people...

  3. R744 ejector technology future perspectives

    Science.gov (United States)

    Hafner, Armin; Banasiak, Krzysztof

    2016-09-01

    Carbon Dioxide, CO2 (R744) was one of the first commonly applied working fluids in the infancy of refrigeration more than 100 years ago. In contrast to ammonia it mainly disappeared after the first generation of synthetic refrigerants have been introduced to the market after 1930. One reason was that the transition from low-rpm belt driven compressors towards the direct electrical motor driven compressors (50-60 Hz) was not performed for CO2 compressors before the revival introduced by Gustav Lorentzen in the 90is of last century. Since 1988 an enormous R & D effort has been made to further develop CO2 refrigeration technology in spite of the opposition from the chemical industry. Today CO2 refrigeration and heat pumping technologies are accepted as viable and sustainable alternatives for several applications like commercial refrigeration, transport refrigeration, vehicle air conditioning & heat pumping, domestic hot water heat pumps and industrial applications. For some applications, the current threshold to introduce R744 technology can be overcome when the system design takes into account the advantage of the thermo dynamical- and fluid properties of CO2. I.e. the system is designed for transcritical operation with all it pros and cons and takes into consideration how to minimize the losses, and to apply the normally lost expansion work. Shortcut-designs, i.e. drop in solutions, just replacing the H(C)FC refrigeration unit with an CO2 systems adapted for higher system pressures will not result in energy efficient products. CO2 systems do offer the advantage of enabling flooded evaporators supported with adapted ejector technology. These units offer high system performances at low temperature differences and show low temperature air mal-distributions across evaporators. This work gives an overview for the development possibilities for several applications during the next years. Resulting in a further market share increase of CO2 refrigeration and heat pump

  4. FEE-SCHEDULE INCREASES IN CANADA: IMPLICATION FOR SERVICE VOLUMES AMONG FAMILY AND SPECIALIST PHYSICIANS.

    Science.gov (United States)

    Ariste, Ruolz

    2015-01-01

    Physician spending has substantially increased over the last few years in Canada to reach $27.4 billion in 2010. Total clinical payment to physicians has grown at an average annual rate of 7.6% from 2004 to 2010. The key policy question is whether or not this additional money has bought more physician services. So, the purpose of this study is to understand if we are paying more for the same amount of medical services in Canada or we are getting more bangs for our buck. At the same time, the paper attempts to find out whether or not there is a productivity difference between family physician services and surgical procedures. Using the Baumol theory and data from the National Physician Database for the period 2004-2010, the paper breaks down growth in physician remuneration into growth in unit cost and number of services, both from the physician and the payer perspectives. After removing general inflation and population growth from the 7.6% growth in total clinical payment, we found that real payment per service and volume of services per capita grew at an average annual rate of 3.2% and 1.4% respectively, suggesting that payment per service was the main cost driver of physician remuneration at the national level. Taking the payer perspective, it was found that, for the fee-for-service (FFS) scheme, volume of services per physician decreased at an average annual rate of -0.6%, which is a crude indicator that labour productivity of physicians on FFS has fallen during the period. However, the situation differs for the surgical procedures. Results also vary by province. Overall, our finding is consistent with the Baumol theory, which hypothesizes higher productivity growth in technology-driven sectors.

  5. Renewable energy: technology and the environment. V. 1

    International Nuclear Information System (INIS)

    Sayigh, A.A.M.

    1992-01-01

    The World Renewable Energy Congress took place a few months after the Earth Summit in Rio. Under the auspices of UNESCO, the World Renewable Energy Network has been established with the aim of acting as a catalyst for large-scale regional projects. The proceedings of this Congress consist of five volumes. Volume one consists of 12 papers presented in special sessions on the first day of the conference and 76 papers on photovoltaic technology which were presented during the rest of the Congress. These dealt with global warming issues, replacement of CFC gases, solar and low-energy architecture, hydrogen as an alternative fuel and photovoltaic conversion systems. The photovoltaic technology was divided into: solar materials; advanced concepts; crystalline silicon; thin films; systems and components; and applications. Two of these on radiation effects in silicon solar cells, are indexed separately. Volume two deals with solar thermal conversion systems and consists of 101 papers on: solar water heaters; solar drying; solar engines and heat pumps; solar cooling and refrigeration; solar thermal fundamentals; and process heat. Volume three is divided into two parts, biomass conversion technology which consists of 47 papers, and wind energy technology which contains 32 papers. Volume four deals with solar and low energy architecture: there are 83 papers. Volume five (106 papers) deals with the various issues which are not discussed in the previous volumes. (author)

  6. Altered Perspectives: Immersive Environments

    Science.gov (United States)

    Shipman, J. S.; Webley, P. W.

    2016-12-01

    Immersive environments provide an exciting experiential technology to visualize the natural world. Given the increasing accessibility of 360o cameras and virtual reality headsets we are now able to visualize artistic principles and scientific concepts in a fully immersive environment. The technology has become popular for photographers as well as designers, industry, educational groups, and museums. Here we show a sci-art perspective on the use of optics and light in the capture and manipulation of 360o images and video of geologic phenomena and cultural heritage sites in Alaska, England, and France. Additionally, we will generate intentionally altered perspectives to lend a surrealistic quality to the landscapes. Locations include the Catacombs of Paris, the Palace of Versailles, and the Northern Lights over Fairbanks, Alaska. Some 360o view cameras now use small portable dual lens technology extending beyond the 180o fish eye lens previously used, providing better coverage and image quality. Virtual reality headsets range in level of sophistication and cost, with the most affordable versions using smart phones and Google Cardboard viewers. The equipment used in this presentation includes a Ricoh Theta S spherical imaging camera. Here we will demonstrate the use of 360o imaging with attendees being able to be part of the immersive environment and experience our locations as if they were visiting themselves.

  7. Big Data in Science and Healthcare: A Review of Recent Literature and Perspectives

    Science.gov (United States)

    Miron-Shatz, T.; Lau, A. Y. S.; Paton, C.

    2014-01-01

    Summary Objectives As technology continues to evolve and rise in various industries, such as healthcare, science, education, and gaming, a sophisticated concept known as Big Data is surfacing. The concept of analytics aims to understand data. We set out to portray and discuss perspectives of the evolving use of Big Data in science and healthcare and, to examine some of the opportunities and challenges. Methods A literature review was conducted to highlight the implications associated with the use of Big Data in scientific research and healthcare innovations, both on a large and small scale. Results Scientists and health-care providers may learn from one another when it comes to understanding the value of Big Data and analytics. Small data, derived by patients and consumers, also requires analytics to become actionable. Connectivism provides a framework for the use of Big Data and analytics in the areas of science and healthcare. This theory assists individuals to recognize and synthesize how human connections are driving the increase in data. Despite the volume and velocity of Big Data, it is truly about technology connecting humans and assisting them to construct knowledge in new ways. Concluding Thoughts The concept of Big Data and associated analytics are to be taken seriously when approaching the use of vast volumes of both structured and unstructured data in science and health-care. Future exploration of issues surrounding data privacy, confidentiality, and education are needed. A greater focus on data from social media, the quantified self-movement, and the application of analytics to “small data” would also be useful. PMID:25123717

  8. TomoEED: Fast Edge-Enhancing Denoising of Tomographic Volumes.

    Science.gov (United States)

    Moreno, J J; Martínez-Sánchez, A; Martínez, J A; Garzón, E M; Fernández, J J

    2018-05-29

    TomoEED is an optimized software tool for fast feature-preserving noise filtering of large 3D tomographic volumes on CPUs and GPUs. The tool is based on the anisotropic nonlinear diffusion method. It has been developed with special emphasis in the reduction of the computational demands by using different strategies, from the algorithmic to the high performance computing perspectives. TomoEED manages to filter large volumes in a matter of minutes in standard computers. TomoEED has been developed in C. It is available for Linux platforms at http://www.cnb.csic.es/%7ejjfernandez/tomoeed. gmartin@ual.es, JJ.Fernandez@csic.es. Supplementary data are available at Bioinformatics online.

  9. Technology Entrepreneurship : A Treatise on Entrepreneurs and Entrepreneurship for and in Technology Ventures. Band 2

    OpenAIRE

    Runge, Wolfgang

    2013-01-01

    The treatise is the first coherent and comprehensive presentation of the important sub-field of "technology entrepreneurship" emphasizing the science and engineering perspectives. It is a presentation of technology entrepreneurship as an inter-cultural approach referring to the US and Germany. It integrates micro- and macro aspects referring to numerous cases of firms' foundations. The book provides also a new semi-quantitative approach to growth of new technology ventures.

  10. Technology Entrepreneurship : A Treatise on Entrepreneurs and Entrepreneurship for and in Technology Ventures. Band 1

    OpenAIRE

    Runge, Wolfgang

    2013-01-01

    The treatise is the first coherent and comprehensive presentation of the important sub-field of "technology entrepreneurship" emphasizing the science and engineering perspectives. It is a presentation of technology entrepreneurship as an inter-cultural approach referring to the US and Germany. It integrates micro- and macro aspects referring to numerous cases of firms' foundations. The book provides also a new semi-quantitative approach to growth of new technology ventures.

  11. The Pursuit of Chronically Reliable Neural Interfaces: A Materials Perspective.

    Science.gov (United States)

    Guo, Liang

    2016-01-01

    Brain-computer interfaces represent one of the most astonishing technologies in our era. However, the grand challenge of chronic instability and limited throughput of the electrode-tissue interface has significantly hindered the further development and ultimate deployment of such exciting technologies. A multidisciplinary research workforce has been called upon to respond to this engineering need. In this paper, I briefly review this multidisciplinary pursuit of chronically reliable neural interfaces from a materials perspective by analyzing the problem, abstracting the engineering principles, and summarizing the corresponding engineering strategies. I further draw my future perspectives by extending the proposed engineering principles.

  12. Dual-Use Space Technology Transfer Conference and Exhibition. Volume 1

    Science.gov (United States)

    Krishen, Kumar (Compiler)

    1994-01-01

    This document contains papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; new ways of doing business; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; ans robotics technologies. More than 77 papers, 20 presentations, and 20 exhibits covering various disciplines were presented b experts from NASA, universities, and industry.

  13. Perspectives on Social Media: A Yearbook

    NARCIS (Netherlands)

    Kommers, Petrus A.M.; Isaias, Pedro; Issa, Tomayess

    2015-01-01

    Perspectives on Social Media presents the most current research on the effectiveness of social media across sectors. Progress in finding better applications for social media relies on the difficult task of integrating media technologies into fields such as engineering, marketing, health, learning,

  14. Marine renewable energies: status and development perspectives

    International Nuclear Information System (INIS)

    2011-01-01

    This document proposes an overview of the marine renewable energy (MRE) market, of the development perspectives, of the industrial, academic and institutional actors, of current technologies and technologies under development, and of French and European research and development programs. These energies comprise: tidal energy, the exploitation of sea temperature differences with respect with depth, wave energy, marine current power energy, osmotic and marine biomass energy

  15. A Historical Perspective of Technology and Planning

    OpenAIRE

    Pitkin, Bill

    2001-01-01

    Technology is our savior. We see, hear and experience this mes- sage constantly in popular culture, from advertisements that demon- strate how technological gadgets make us smarter and perhaps even more likable to forecasts by financial analysts that the information economy will continue to increase wealth for savvy investors. The hype produced by this common message implies that unless we jump on the information age bandwagon, we risk missing out on its vast benefits. Futuristic writers such...

  16. Enabling Logistics With Portable and Wireless Technology Study. Volume 1

    Science.gov (United States)

    2004-08-06

    Players41 Tag Vendors Reader Vendors Software Players Early Adopters Alien Technology Corporation Intermec Technologies Corp. Descartes Systems...e at pa ion rt s s /st be an co d m ar e ds s rene l availability of interopera le s e demands of EPC isc ot a bro f a er b labl as te is, c...Intermec Technologies Corp. Descartes Systems Boeing Intermec Technologies Corp. Matrics Inc. EXE Technologies CHEP Matrics Inc. Psion Teklogix Inc

  17. Logistics Reduction Technologies for Exploration Missions

    Science.gov (United States)

    Broyan, James L., Jr.; Ewert, Michael K.; Fink, Patrick W.

    2014-01-01

    Human exploration missions under study are limited by the launch mass capacity of existing and planned launch vehicles. The logistical mass of crew items is typically considered separate from the vehicle structure, habitat outfitting, and life support systems. Although mass is typically the focus of exploration missions, due to its strong impact on launch vehicle and habitable volume for the crew, logistics volume also needs to be considered. NASA's Advanced Exploration Systems (AES) Logistics Reduction and Repurposing (LRR) Project is developing six logistics technologies guided by a systems engineering cradle-to-grave approach to enable after-use crew items to augment vehicle systems. Specifically, AES LRR is investigating the direct reduction of clothing mass, the repurposing of logistical packaging, the use of autonomous logistics management technologies, the processing of spent crew items to benefit radiation shielding and water recovery, and the conversion of trash to propulsion gases. Reduction of mass has a corresponding and significant impact to logistical volume. The reduction of logistical volume can reduce the overall pressurized vehicle mass directly, or indirectly benefit the mission by allowing for an increase in habitable volume during the mission. The systematic implementation of these types of technologies will increase launch mass efficiency by enabling items to be used for secondary purposes and improve the habitability of the vehicle as mission durations increase. Early studies have shown that the use of advanced logistics technologies can save approximately 20 m(sup 3) of volume during transit alone for a six-person Mars conjunction class mission.

  18. QuEST: Qualifying Environmentally Sustainable Technologies. Volume 6

    Science.gov (United States)

    Lewis, Pattie

    2011-01-01

    QuEST is a publication of the NASA Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM). This issue contains brief articles on: Risk Identification and Mitigation, Material Management and Substitution Efforts--Hexavalent Chrome-free Coatings and Low volatile organic compounds (VOCs) Coatings, Lead-Free Electronics, Corn-Based Depainting Media; Alternative Energy Efforts Hydrogen Sensors and Solar Air Conditioning. Other TEERM Efforts include: Energy and Water Management and Remediation Technology Collaboration.

  19. Software Engineering and Knowledge Engineering Theory and Practice Volume 2

    CERN Document Server

    2012-01-01

    The volume includes a set of selected papers extended and revised from the I2009 Pacific-Asia Conference on Knowledge Engineering and Software Engineering (KESE 2009) was held on December 19~ 20, 2009, Shenzhen, China.   Volume 2 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of Knowledge Engineering and Communication Technology to disseminate their latest research results and exchange views on the future research directions of these fields. 135 high-quality papers are included in the volume. Each paper has been peer-reviewed by at least 2 program committee members and selected by the volume editor Prof.Yanwen Wu.   On behalf of the this volume, we would like to express our sincere appreciation to all of authors and referees for their efforts reviewing the papers. Hoping you can find lots of profound research ideas and results on the related fields of Knowledge Engineering and Communication Technology

  20. Discourses of Technology

    DEFF Research Database (Denmark)

    Sommer, Jannek K.; Knudsen, Gry Høngsmark

    In this poster we address consumption of technology from the perspective of failure. A large body of studies of consumption of technology have focused on consumer acceptance (Kozinets, 2008). These studies have identified particular narratives about social and economic progress, and pleasure...... (Kozinets, 2008) as drivers of consumer acceptance of new technology. Similarly, Giesler (2008) has conceptualized consumer acceptance of technology as a form of marketplace drama, in which market ideologies are negotiated between consumers and media discourses. We suggest to study discourses around failed...... technology products to explore the negotiation of the familiar and alien that makes consumers reject or embrace a new technology. Thus, this particular project sets out to analyze consumer discourses surrounding the Google Glass video “How it Feels [through Google Glass]” on YouTube, because we want...

  1. Science and Technology of Ceramics

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 2. Science and Technology of Ceramics - Advanced Ceramics: Structural Ceramics and Glasses. Sheela K Ramasesha. Series Article Volume 5 Issue 2 February 2000 pp 4-11 ...

  2. Transfer of nuclear technology: A designer-contractor's perspective

    International Nuclear Information System (INIS)

    See Hoye, D.; Hedges, K.R.; Hink, A.D.

    2000-01-01

    The paper presents the successful Canadian experience in developing a nuclear power technology - CANDU - and exporting it. Consideration is paid to technology that has to be transferred, receiver country objectives and mechanisms and organizational framework. (author)

  3. Information Technology Resources Assessment

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    The Information Technology Resources Assessment (ITRA) is being published as a companion document to the Department of Energy (DOE) FY 1994--FY 1998 Information Resources Management Long-Range Plan. This document represents a collaborative effort between the Office of Information Resources Management and the Office of Energy Research that was undertaken to achieve, in part, the Technology Strategic Objective of IRM Vision 21. An integral part of this objective, technology forecasting provides an understanding of the information technology horizon and presents a perspective and focus on technologies of particular interest to DOE program activities. Specifically, this document provides site planners with an overview of the status and use of new information technology for their planning consideration.

  4. Technical support for the Ohio Clean Coal Technology Program. Volume 2, Baseline of knowledge concerning process modification opportunities, research needs, by-product market potential, and regulatory requirements: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Olfenbuttel, R.; Clark, S.; Helper, E.; Hinchee, R.; Kuntz, C.; Means, J.; Oxley, J.; Paisley, M.; Rogers, C.; Sheppard, W.; Smolak, L. [Battelle, Columbus, OH (United States)

    1989-08-28

    This report was prepared for the Ohio Coal Development Office (OCDO) under Grant Agreement No. CDO/R-88-LR1 and comprises two volumes. Volume 1 presents data on the chemical, physical, and leaching characteristics of by-products from a wide variety of clean coal combustion processes. Volume 2 consists of a discussion of (a) process modification waste minimization opportunities and stabilization considerations; (b) research and development needs and issues relating to clean coal combustion technologies and by-products; (c) the market potential for reusing or recycling by-product materials; and (d) regulatory considerations relating to by-product disposal or reuse.

  5. Educational technology in medical education.

    Science.gov (United States)

    Han, Heeyoung; Resch, David S; Kovach, Regina A

    2013-01-01

    This article aims to review the past practices of educational technology and envision future directions for medical education. The discussion starts with a historical review of definitions and perspectives of educational technology, in which the authors propose that educators adopt a broader process-oriented understanding of educational technology. Future directions of e-learning, simulation, and health information technology are discussed based on a systems view of the technological process. As new technologies continue to arise, this process-oriented understanding and outcome-based expectations of educational technology should be embraced. With this view, educational technology should be valued in terms of how well the technological process informs and facilitates learning, and the acquisition and maintenance of clinical expertise.

  6. Designing Human Technologies

    DEFF Research Database (Denmark)

    Simonsen, Jesper

    and the design process, in ethical and society-related concerns, and in evaluating how designs fulfill needs and solve problems. Designing Human Technologies subscribes to a broad technology concept including information and communication, mobile, environmental/sustainable and energy technologies......Design is increasingly becoming a part of the university curriculum and research agenda. The keynote present and discuss Designing Human Technologies – an initiative aiming at establishing a design oriented main subject area alongside traditional main subject areas such as Natural Science......, the Humanities, and Social Science. The initiative broadens the perspective of IS and recognize reflections on aesthetics, ethics, values, connections to politics, and strategies for enabling a better future as legitimate parts of the research agenda. Designing Human Technologies is a design-oriented Strategic...

  7. Resources in Technology 7.

    Science.gov (United States)

    International Technology Education Association, Reston, VA.

    This volume of Resources in Technology contains the following eight instructional modules: (1) "Processing Technology"; (2) "Water--A Magic Resource"; (3) "Hazardous Waste Disposal--The NIMBY (Not in My Backyard) Syndrome"; (4) "Processing Fibers and Fabrics"; (5) "Robotics--An Emerging…

  8. Strategy of technology and innovation

    International Nuclear Information System (INIS)

    Kim, Yeon Min

    1998-10-01

    This book introduces strategy of technology and innovation which includes design and development of strategy of technology, performance of strategy of technology and building and practice of strategy of development. The contents of this book are form of industrial innovation, act in strategy, advantage of technical innovation, new perspective of studying and innovation, alliance with competitor, cost of transmission and innovation, learning cycle of new product and power of consistency of product.

  9. Fusion technology 1992

    International Nuclear Information System (INIS)

    Ferro, C.; Gasparatto, M.; Knoepfel, H.

    1993-01-01

    The aim of the biennial series of symposia on the title subject, organized by the European Fusion Laboratories, is the exchange of information on the design, construction and operation of fusion experiments and on the technology being developed for the next step devices and fusion reactors. The coverage of the volume includes the technological aspects of fusion reactors in relation to new developments, this forming a guideline for the definition of future work. These proceedings comprise three volumes and contain both the invited lectures and contributed papers presented at the symposium which was attended by 569 participants from around the globe. The 343 papers, including 12 invited papers, characterize the increasing interest of industry in the fusion programme, giving a broad and current overview on the progress and trends fusion technology is experiencing now, as well as indicating the future for fusion devices

  10. Nuclear proliferation and civilian nuclear power: report of the Nonproliferation Alternative Systems Assessment Program. Volume 1. Program summary

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    This report summarizes the Nonproliferation Alternative Systems Assessment Program (NASAP): its background, its studies, and its results. This introductory chapter traces the growth of the issue of nuclear weapons proliferation and the organization and objectives of NASAP. Chapter 2 summarizes the program's assessments, findings and recommendations. Each of Volumes II-VII reports on an individual assessment (Volume II: Proliferation Resistance; Volume III: Resources and Fuel Cycle Facilities; Volume IV: Commercial Potential; Volume V: Economics and Systems Analysis; Volume VI: Safety and Environmental Considerations for Licensing; Volume VII: International Perspectives). Volume VIII (Advanced Concepts) presents a combined assessment of several less fully developed concepts, and Volume IX (Reactor and Fuel Cycle Descriptions) provides detailed descriptions of the reactor and fuel-cycle systems studied by NASAP.

  11. Nuclear proliferation and civilian nuclear power: report of the Nonproliferation Alternative Systems Assessment Program. Volume 1. Program summary

    International Nuclear Information System (INIS)

    1979-12-01

    This report summarizes the Nonproliferation Alternative Systems Assessment Program (NASAP): its background, its studies, and its results. This introductory chapter traces the growth of the issue of nuclear weapons proliferation and the organization and objectives of NASAP. Chapter 2 summarizes the program's assessments, findings and recommendations. Each of Volumes II-VII reports on an individual assessment (Volume II: Proliferation Resistance; Volume III: Resources and Fuel Cycle Facilities; Volume IV: Commercial Potential; Volume V: Economics and Systems Analysis; Volume VI: Safety and Environmental Considerations for Licensing; Volume VII: International Perspectives). Volume VIII (Advanced Concepts) presents a combined assessment of several less fully developed concepts, and Volume IX (Reactor and Fuel Cycle Descriptions) provides detailed descriptions of the reactor and fuel-cycle systems studied by NASAP

  12. Patient-oriented health technologies: Patients' perspectives and use.

    Science.gov (United States)

    Bauer, Amy M; Rue, Tessa; Munson, Sean A; Ghomi, Reza Hosseini; Keppel, Gina A; Cole, Allison M; Baldwin, Laura-Mae; Katon, Wayne

    2017-08-01

    For patient-oriented mobile health tools to contribute meaningfully to improving healthcare delivery, widespread acceptance and use of such tools by patients are critical. However, little is known about patients' attitudes toward using health technology and their willingness to share health data with providers. To investigate primary care patients' comfort sharing health information through mobile devices, and patients' awareness and use of patient portals. Patients (n=918) who visited one of 6 primary care clinics in the Northwest US completed a survey about health technology use, medical conditions, and demographics. More patients were comfortable sharing mobile health information with providers than having third parties store their information (62% vs 30%, Somers D=.33, phigher among patients with a chronic condition (AOR= 3.18, p=0.004). Comfort, awareness, and use of health technologies were variable. Practices introducing patient-facing health technologies should promote awareness, address concerns about data security, and provide education and training, especially to older adults and those with health literacy limitations. Patient-facing health technologies provide an opportunity for delivering scalable health education and self-management support, particularly for patients with chronic conditions who are already using patient portals.

  13. Space Transportation Materials and Structures Technology Workshop. Volume 2: Proceedings

    International Nuclear Information System (INIS)

    Cazier, F.W. Jr.; Gardner, J.E.

    1993-02-01

    The Space Transportation Materials and Structures Technology Workshop was held on September 23-26, 1991, in Newport News, Virginia. The workshop, sponsored by the NASA Office of Space Flight and the NASA Office of Aeronautics and Space Technology, was held to provide a forum for communication within the space materials and structures technology developer and user communities. Workshop participants were organized into a Vehicle Technology Requirements session and three working panels: Materials and Structures Technologies for Vehicle Systems, Propulsion Systems, and Entry Systems. Separate abstracts have been prepared for papers in this report

  14. Separation science and technology: an ORNL perspective

    International Nuclear Information System (INIS)

    Pruett, D.J.

    1986-05-01

    This report was prepared as a summary of a fourfold effort: (1) to examine schemes for defining and categorizing the field of separation science and technology; (2) to review several of the major categories of separation techniques in order to determine the most recent developments and future research needs; (3) to consider selected problems and programs that require advances in separation science and technology as a part of their solution; and (4) to propose suggestions for new directions in separation research at Oak Ridge National Laboratory (ORNL)

  15. Compilation of contract research for the Materials Engineering Branch, Division of Engineering Technology. Annual report for FY 1985. Volume 4

    International Nuclear Information System (INIS)

    1986-03-01

    The compilation of annual reports by contractors to the Materials Engineering Branch of the NRC Office of Research, concentrates on achievements in safety research for the primary system of commercial light water power reactors, particularly with regard to reactor vessels, primary system piping, steam generators and for non-destructive examination of primary system components. This report, covering research conducted during Fiscal Year 1985, is the fourth volume of the series of NUREG-0975, Compilation of Contractor Research for the Materials Engineering Branch, Division of Engineering Technology

  16. Compilation of contract research for the Materials Engineering Branch, Division of Engineering Technology. Annual report for FY 1984. Volume 3

    International Nuclear Information System (INIS)

    1985-04-01

    This compilation of annual reports by contractors to the Materials Engineering Branch of the NRC Office of Research, concentrates on achievments in safety research for the primary system of commercial light water power reactors, particularly with regard to reactor vessels, primary system piping, steam generators and for non-destructive examination of primary system components. This report, covering research conducted during Fiscal Year 1984, is the third volume of the series of NUREG-0975, compilation of Contractor Research for the Materials Engineering Branch, Division of Engineering Technology

  17. Food waste-to-energy conversion technologies: current status and future directions.

    Science.gov (United States)

    Pham, Thi Phuong Thuy; Kaushik, Rajni; Parshetti, Ganesh K; Mahmood, Russell; Balasubramanian, Rajasekhar

    2015-04-01

    Food waste represents a significantly fraction of municipal solid waste. Proper management and recycling of huge volumes of food waste are required to reduce its environmental burdens and to minimize risks to human health. Food waste is indeed an untapped resource with great potential for energy production. Utilization of food waste for energy conversion currently represents a challenge due to various reasons. These include its inherent heterogeneously variable compositions, high moisture contents and low calorific value, which constitute an impediment for the development of robust, large scale, and efficient industrial processes. Although a considerable amount of research has been carried out on the conversion of food waste to renewable energy, there is a lack of comprehensive and systematic reviews of the published literature. The present review synthesizes the current knowledge available in the use of technologies for food-waste-to-energy conversion involving biological (e.g. anaerobic digestion and fermentation), thermal and thermochemical technologies (e.g. incineration, pyrolysis, gasification and hydrothermal oxidation). The competitive advantages of these technologies as well as the challenges associated with them are discussed. In addition, the future directions for more effective utilization of food waste for renewable energy generation are suggested from an interdisciplinary perspective. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. The Third Perspective on Shifting Cultivation

    Directory of Open Access Journals (Sweden)

    Sukanya Sharma

    2017-11-01

    Full Text Available ABSTRACT There are two perspectives in which the understanding of food sustainability in the world is entangled. The first perspective which believes that food sustainability can be achieved by technology presents shifting cultivation as a reflection of a lower state of cultural evolution in comparison with more sophisticated societies (O’Brien 2002.The second perspective which believes in culture, in the ‘way of life’ paradigm valorise shifting cultivation as a form of indigenous genius, representing the indigenous people as perhaps the original environmentalist (Bandy et al.1993; Conklin 1957; Grandstaff 1981; Hong 1987. The biasness of both the perspectives is well visible. The task now is to document and evaluate indigenous strategies of shifting cultivation through a process of research and development. This process involves identification of promising indigenous practices, characterization of the practices, validation of the utility of the practice for other communities, extrapolation to other locations, verification with key farmers, and wide-scale extension. This can be treated as the third perspective available to the policy makers. By this, the detrimental effects of shifting cultivation can be mitigated and productivity increased (Mali 2003.

  19. Theoretical chemistry advances and perspectives

    CERN Document Server

    Eyring, Henry

    1980-01-01

    Theoretical Chemistry: Advances and Perspectives, Volume 5 covers articles concerning all aspects of theoretical chemistry. The book discusses the mean spherical approximation for simple electrolyte solutions; the representation of lattice sums as Mellin-transformed products of theta functions; and the evaluation of two-dimensional lattice sums by number theoretic means. The text also describes an application of contour integration; a lattice model of quantum fluid; as well as the computational aspects of chemical equilibrium in complex systems. Chemists and physicists will find the book usef

  20. FORMS OF TAX EVASION IN ROMANIA. ANALYTICAL PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    PETRE BREZEANU

    2011-01-01

    Full Text Available This study brings to the fore an analysis of the phenomenon of tax evasion in Romania. The perspective is broad, with a descriptive substrate, originally founded by highlighting the dimensions that define this phenomenon; later, the perspective is materialized by the presentation of tax evasion schemes that often takes the form of real complex fiscal and also financial engineering. The purpose of this work consists in the awareness of practitioners, academics and the public of the tax evasion forms useful in order to identify precise modalities to combat it. Since the volume of funds subject to the phenomenon of tax evasion is greater, the negative effects of macroeconomic environment.