WorldWideScience

Sample records for technology perimetry fdtp

  1. Comparison of visual field test results obtained through Humphrey matrix frequency doubling technology perimetry versus standard automated perimetry in healthy children

    Directory of Open Access Journals (Sweden)

    Sibel Kocabeyoglu

    2013-01-01

    Full Text Available Aims : The aim of this study was to compare the visual field test results in healthy children obtained via the Humphrey matrix 24-2 threshold program and standard automated perimetry (SAP using the Swedish interactive threshold algorithm (SITA-Standard 24-2 test. Materials and Methods: This prospective study included 55 healthy children without ocular or systemic disorders who underwent both SAP and frequency doubling technology (FDT perimetry visual field testing. Visual field test reliability indices, test duration, global indices (mean deviation [MD], and pattern standard deviation [PSD] were compared between the 2 tests using the Wilcoxon signed-rank test and paired t-test. The performance of the Humphrey field analyzer (HFA 24-2 SITA-standard and frequency-doubling technology Matrix 24-2 tests between genders were compared with Mann-Whitney U-test. Results: Fifty-five healthy children with a mean age of 12.2 ± 1.9 years (range from 8 years to 16 years were included in this prospective study. The test durations of SAP and FDT were similar (5.2 ± 0.5 and 5.1 ± 0.2 min, respectively, P = 0.651. MD and the PSD values obtained via FDT Matrix were significantly higher than those obtained via SAP (P < 0.001, and fixation losses and false negative errors were significantly less with SAP (P < 0.05. A weak positive correlation between the two tests in terms of MD (r = 0.352, P = 0.008 and PSD (r = 0.329, P = 0.014 was observed. Conclusion: Children were able to complete both the visual test algorithms successfully within 6 min. However, SAP testing appears to be associated with less depression of the visual field indices of healthy children. FDT Matrix and SAP should not be used interchangeably in the follow-up of children.

  2. Role of frequency doubling technology perimetry in screening of diabetic retinopathy.

    Directory of Open Access Journals (Sweden)

    Parikh Rajul

    2006-01-01

    Full Text Available Purpose: To study the ability of frequency-doubling technology perimetry (FDT to detect sight-threatening diabetic retinopathy. Method: Fifty-eight eyes of fifty-eight patients with established diagnosis of diabetes mellitus with diabetic retinopathy, fifty-five eyes of fifty-five diabetic patients without retinopathy, and forty-one eyes of forty-one normals underwent FDT and dilated stereo-biomicroscopic fundus examination. The sensitivity and specificity of FDT in identification of "sight-threatening retinopathy" (severe and very severe nonproliferative diabetic retinopathy and proliferative diabetic retinopathy and clinically significant macular edema (CSME were determined. Results: For the detection of sight-threatening retinopathy, two abnormal adjacent points depressed to any level on the 20-1 screening program had a sensitivity of 90.5% and specificity of 97.6%. At (assuming a 10% prevalence of sight-threatening retinopathy in a diabetic clinic, two abnormal adjacent points anywhere in the field depressed to any level has a positive predictive value (PPV of 48% with a negative predictive value of 98.8%. Sensitivity and specificity for the detection of CSME was poor. Conclusions: The 20-1 screening program of the FDT is useful in the detection of sight-threatening diabetic retinopathy (PPV 48%. A normal 20-1 test rules out sight-threatening retinopathy. FDT was not useful in the detection of CSME.

  3. Glaucoma progression detection with frequency doubling technology (FDT) compared to standard automated perimetry (SAP) in the Groningen Longitudinal Glaucoma Study

    NARCIS (Netherlands)

    Wesselink, Christiaan; Jansonius, Nomdo M.

    Purpose: To determine the usefulness of frequency doubling perimetry (FDT) for progression detection in glaucoma, compared to standard automated perimetry (SAP). Methods: Data were used from 150 eyes of 150 glaucoma patients from the Groningen Longitudinal Glaucoma Study. After baseline, SAP was

  4. Glaucoma progression detection with frequency doubling technology (FDT) compared to standard automated perimetry (SAP) in the Groningen Longitudinal Glaucoma Study.

    Science.gov (United States)

    Wesselink, Christiaan; Jansonius, Nomdo M

    2017-09-01

    To determine the usefulness of frequency doubling perimetry (FDT) for progression detection in glaucoma, compared to standard automated perimetry (SAP). Data were used from 150 eyes of 150 glaucoma patients from the Groningen Longitudinal Glaucoma Study. After baseline, SAP was performed approximately yearly; FDT every other year. First and last visit had to contain both tests. Using linear regression, progression velocities were calculated for SAP (Humphrey Field Analyzer) mean deviation (MD) and FDT MD and the number of test locations with a total deviation probability below p glaucoma progression in patients who cannot perform SAP reliably. © 2017 The Authors Ophthalmic & Physiological Optics © 2017 The College of Optometrists.

  5. Is oculokinetic perimetry useful?

    Science.gov (United States)

    Abreu Reyes, J A; Gonzalez de la Rosa, M; Sanchez Mendez, M; Mesa Moreno, C G; Santos Barrera, R

    1992-09-01

    An evaluation was carried out comparing Oculokinetic Perimetry (O.K.P.) with Automatic Perimetry of Thresholds (Hipocampus Perimeter) for ocular hypertension and glaucoma studying 145 eyes. The O.K.P. shows a sensitivity between 35.65 and 38.54%, a specificity of 76.67-79.59%, a + predictive value of 78.72-85.42%, and a-predictive value of 23.71-39.80%.

  6. Combining Frequency Doubling Technology Perimetry and Scanning Laser Polarimetry for Glaucoma Detection.

    Science.gov (United States)

    Mwanza, Jean-Claude; Warren, Joshua L; Hochberg, Jessica T; Budenz, Donald L; Chang, Robert T; Ramulu, Pradeep Y

    2015-01-01

    To determine the ability of frequency doubling technology (FDT) and scanning laser polarimetry with variable corneal compensation (GDx-VCC) to detect glaucoma when used individually and in combination. One hundred ten normal and 114 glaucomatous subjects were tested with FDT C-20-5 screening protocol and the GDx-VCC. The discriminating ability was tested for each device individually and for both devices combined using GDx-NFI, GDx-TSNIT, number of missed points of FDT, and normal or abnormal FDT. Measures of discrimination included sensitivity, specificity, area under the curve (AUC), Akaike's information criterion (AIC), and prediction confidence interval lengths. For detecting glaucoma regardless of severity, the multivariable model resulting from the combination of GDx-TSNIT, number of abnormal points on FDT (NAP-FDT), and the interaction GDx-TSNIT×NAP-FDT (AIC: 88.28, AUC: 0.959, sensitivity: 94.6%, specificity: 89.5%) outperformed the best single-variable model provided by GDx-NFI (AIC: 120.88, AUC: 0.914, sensitivity: 87.8%, specificity: 84.2%). The multivariable model combining GDx-TSNIT, NAP-FDT, and interaction GDx-TSNIT×NAP-FDT consistently provided better discriminating abilities for detecting early, moderate, and severe glaucoma than the best single-variable models. The multivariable model including GDx-TSNIT, NAP-FDT, and the interaction GDx-TSNIT×NAP-FDT provides the best glaucoma prediction compared with all other multivariable and univariable models. Combining the FDT C-20-5 screening protocol and GDx-VCC improves glaucoma detection compared with using GDx or FDT alone.

  7. [Cartographic errors in perimetry].

    Science.gov (United States)

    Papoulis, C; Weber, J

    1991-02-01

    Cartography in perimetry repeats the problem of the cartography of the globe: it is impossible to transfer the image properly without a distortion of either angles, distances or areas. The projection type mostly used in perimetry leads to an enlargement and a tangential deformation that increases overproportionally towards the periphery (30 degrees: +5%, 60 degrees: +20%, 90 degrees: +57%). A circular scotoma, for example, is charted as en ellipse. In the opposite case, when a test point pattern is transferred from the perimetric chart to a perimetric sphere, there is a deformation, too. The distances between the test points are reduced in tangential direction, compared to the chart. A test grid with equidistant points on the chart appears in a rhomboid or rectangular distortion. This phenomenon has to be considered in the design of test point patterns for automatic static perimeters.

  8. [Progression of flicker perimetry in clinical application].

    Science.gov (United States)

    Yu, Fengqi; Wang, Dabo

    2014-05-01

    Flicker perimetry measures the function of retina by stimulating it using flickering light. It has three test modes:contrast modulation flicker, critical flicker fusion frequency and luminance pedestal flicker. These 3 modes have their own characteristics. Flicker perimetry shows a higher sensitivity than white-white standard automated perimetry in early diagnosis of glaucoma. It also has advantages in the diagnosis for age-related macular degeneration, diabetic retinopathy and other retinal diseases. With further understanding of the flicker perimetry, its clinical application will gradually expand. In this paper, the basic principle and clinical application are reviewed.

  9. Correcting LCD luminance non-uniformity for threshold Saccadic Vector Optokinetic Perimetry (SVOP).

    Science.gov (United States)

    Perperidis, Antonios; Murray, Ian; Brash, Harry; McTrusty, Alice; Cameron, Lorraine; Fleck, Brian; Minns, Robert

    2013-01-01

    The accurate assessment of visual field function can provide valuable information on a range of visual disorders. Saccadic Vector Optokinetic Perimetry (SVOP) is a novel instrument for measuring supra-threshold visual fields in young children who are otherwise unable to perform Automated Static Perimetry (ASP). However, limitations in Liquid Crystal Display (LCD) technology restrict the ability of SVOP to determine threshold values at various points in the visual field, often required in detailed perimetry examinations. This paper introduces a purpose-specific LCD luminance non-uniformity compensation approach to address this limitation. Thorough quantitative evaluation identifies the effectiveness of the proposed approach in (i) compensating for luminance non-uniformities across an LCD, and (ii) enabling SVOP to perform accurate and precise threshold visual field tests. The findings demonstrate that SVOP provides a promising alternative to the current threshold ASP standard (Humphrey Field Analyser).

  10. Comparison of Size Modulation Standard Automated Perimetry and Conventional Standard Automated Perimetry with a 10-2 Test Program in Glaucoma Patients.

    Science.gov (United States)

    Hirasawa, Kazunori; Takahashi, Natsumi; Satou, Tsukasa; Kasahara, Masayuki; Matsumura, Kazuhiro; Shoji, Nobuyuki

    2017-08-01

    This prospective observational study compared the performance of size modulation standard automated perimetry with the Octopus 600 10-2 test program, with stimulus size modulation during testing, based on stimulus intensity and conventional standard automated perimetry, with that of the Humphrey 10-2 test program in glaucoma patients. Eighty-seven eyes of 87 glaucoma patients underwent size modulation standard automated perimetry with Dynamic strategy and conventional standard automated perimetry using the SITA standard strategy. The main outcome measures were global indices, point-wise threshold, visual defect size and depth, reliability indices, and test duration; these were compared between size modulation standard automated perimetry and conventional standard automated perimetry. Global indices and point-wise threshold values between size modulation standard automated perimetry and conventional standard automated perimetry were moderately to strongly correlated (p 33.40, p modulation standard automated perimetry than with conventional standard automated perimetry, but the visual-field defect size was smaller (p modulation-standard automated perimetry than on conventional standard automated perimetry. The reliability indices, particularly the false-negative response, of size modulation standard automated perimetry were worse than those of conventional standard automated perimetry (p modulation standard automated perimetry than with conventional standard automated perimetry (p = 0.02). Global indices and the point-wise threshold value of the two testing modalities correlated well. However, the potential of a large stimulus presented at an area with a decreased sensitivity with size modulation standard automated perimetry could underestimate the actual threshold in the 10-2 test protocol, as compared with conventional standard automated perimetry.

  11. Awake perimetry testing for occipital epilepsy surgery.

    Science.gov (United States)

    Joswig, Holger; Girvin, John P; Blume, Warren T; Burneo, Jorge G; Steven, David A

    2017-12-08

    In the literature, there are few reports that provide a detailed account on the technique of visual electrocortical stimulation in the setting of resective surgery for occipital epilepsy. In this technical note, the authors describe how a 26-year-old male with long-standing occipital epilepsy underwent resective surgery under awake conditions, using electrocortical stimulation of the occipital lobe, with the aid of a laser pointer and a perimetry chart on a stand within his visual field. The eloquent primary visual cortex was found to overlap with the seizure onset zone that was previously determined with subdural electrodes. A maximum functionally safe resection was performed, rendering the patient seizure free as of his last follow-up at 20 months, with no visual field impairment.

  12. Volume of visual field assessed with kinetic perimetry and its application to static perimetry

    Directory of Open Access Journals (Sweden)

    Christoforidis JB

    2011-04-01

    Full Text Available John B ChristoforidisCollege of Medicine, The Ohio State University, Columbus, OH, USABackground: The purpose of this study was to quantify the volume of the kinetic visual field with a single unit that accounts for visual field area and differential luminance sensitivity.Methods: Kinetic visual field perimetry was performed with a Goldmann perimeter using I4e, I3e, I2e, and I1e targets. The visual fields of 25 normal volunteers (17 women, eight men of mean age 33.9 ± 10.1 (range 17–64 years were obtained and digitized. Isopter areas were measured with a method devised to correct cartographic distortion due to polar projection inherent in perimetry and are expressed in steradians. The third dimension of each isopter represents sensitivity to target luminance and was calculated as log (target luminance-1. If luminance is expressed in cd/m2, the values for the third dimension are 0.5 for I4e, 1.0 for I3e, 1.5 for I2e, and 2.0 for I1e. The resulting unit is a steradian (log 103 (cd/m2-1 which is referred to as a Goldmann. In addition, the visual fields of four patients with representative visual defect patterns were examined and compared with normal subjects.Results: Mean isopter areas for normal subjects were 3.092 ± 0.242 steradians for I4e, 2.349 ± 0.280 steradians for I3e, 1.242 ± 0.263 steradians for I2e, and 0.251 ± 0.114 steradians for the I1e target. Isopter volumes were 1.546 ± 0.121 Goldmanns for the I4e target, 1.174 ± 0.140 Goldmanns for I3e, 0.621 ± 0.131 Goldmanns for I2e, and 0.126 ± 0.057 Goldmanns for I1e. The total mean visual field volume in our study for the I target was 3.467 ± 0.371 Goldmanns.Conclusion: The volume of the island of vision may be used to quantify a visual field with a single value which contains information about both visual field extension and differential luminance sensitivity. This technique may be used to assess the progression or stability of visual field defects over time. A similar method may

  13. Fundus perimetry with the Micro Perimeter 1 in normal individuals: comparison with conventional threshold perimetry.

    Science.gov (United States)

    Springer, Christina; Bültmann, Stefan; Völcker, Hans E; Rohrschneider, Klaus

    2005-05-01

    To determine differential light threshold values obtained with the Micro Perimeter 1 (MP1) in healthy volunteers and to correlate them with conventional automated static threshold perimetry using the Octopus 101 Perimeter. Prospective comparative observational study. Thirty healthy volunteers. In 30 eyes of 30 healthy volunteers, static threshold perimetry was performed with the MP1 Micro Perimeter (Nidek Inc., Italy) and the Octopus 101 (Haag-Streit AG, Switzerland) in the same eye in random order. Differential light threshold values obtained with the MP1 and their difference to differential light threshold values with the Octopus. Differential light sensitivity was compared for 21 matching points in a rectangular test grid using similar examination settings with Goldmann III stimuli, stimulus presentation time of 100 msec, and white background illumination (1.27 cd/m2). For the 21 matching locations, mean differential light thresholds with the MP 1 and the Octopus were 15.5+/-0.8 decibels (dB) (range, 13.0-17.1) and 30.2+/-1.2 dB (range, 27.7-32.0), respectively. On the average, the Octopus showed higher threshold values for all test locations than the MP1. The mean difference between both examinations was 14.6+/-1.8 dB for all locations and 14.8+/-1.7 dB excluding the test locations at the blind spot. With a considerably high grade of variation according to the test point location, the difference between the 2 devices varied from 11.4 to 18.3 dB, showing a vertical asymmetry with a larger difference in the lower part of the visual field. Linear regression of the perimetric results for each test point location, excluding the area of the blind spot and the lower line of the test grid, showed significant correlation (r = 0.56; P = 0.036). The results show that the MP1 provides reproducible threshold values with a systematic difference compared with standard Octopus perimetry of approximately 15 dB. With a larger difference in the lower part of the visual field

  14. Feasibility and outcome of automated kinetic perimetry in children.

    Science.gov (United States)

    Wilscher, Stephanie; Wabbels, Bettina; Lorenz, Birgit

    2010-10-01

    Visual field testing in children is often performed using a Goldmann perimeter. Because the technique is performed manually, it is difficult to standardize, and stimuli are often presented too quickly. Automated kinetic perimetry has been successfully established in adults, but to date no results have been published in children. This paper describes the feasibility and outcome of automated kinetic perimetry in children in a standard clinical setting. Fifty children aged 5-14 years were examined using a Twinfield perimeter (Oculus Inc., Wetzlar, Germany), including healthy children, children with unilateral pathologies (normal eye tested) and children with unilateral strabismus (non-affected eye tested). Kinetic perimetry was performed using stimuli III(4), I(4), I(2) and I(1) (Goldmann standard) with a test velocity of 2 degrees/s. Whenever possible, each test was performed twice. Automated and/or manual re-testing was possible on the same device whenever indicated. Automated kinetic perimetry took about 3.5 min per eye and could be completed more quickly than manual Goldmann perimetry, despite the lower test velocity. All children--with the exception of one 11 year old--were able to perform the test at least once. There was no significant correlation between age and the isopters or the area inside the isopters. No significant difference was found between children with and without strabismus. In 49 out of 50 children (98%) automatic kinetic perimetry was possible in a clinical setting using a commercially available Twinfield perimeter in a session of clinically practical duration. A major advantage is constant test velocity, independent of the examiner. Test performance was not only dependent on age, but also on the child's maturity and ability to concentrate. Older children tended to detect the stimuli more peripherally. Older children got better results from the examiner evaluation parameters attention and central fixation.

  15. Theoretical methods in the assessment of vision and automated perimetry.

    Science.gov (United States)

    Jindra, Lawrence F

    2006-01-01

    An analytic understanding of automated perimetry requires an appreciation of the fundamental theories of vision and an understanding of the basic mathematical rudiments of signal processing theory. The theories of vision by Weber, Fechtner, and Stevens are evaluated and the mathematical bases of logarithmic, exponential, and power functions are considered as they relate to various models of visual functioning. Presenting perimetry results as actual, linear stimulus values, not theoretical, non-linear response values, could better allow clinicians to assess and examine the testing data directly to evaluate more correctly and accurately their patients' visual function.

  16. [Computer program controlled perimetry, its advantages and disadvantages].

    Science.gov (United States)

    Herbolzheimer, W G

    1986-10-01

    Following a short historical introduction and a description of basic methods of perimetry, computerized perimetry is described (taking the Octopus computerized perimeter as an example). The hardware-software concept and the three parts of the automatic perimeter, i.e., the controller, the measuring section, and the program section, are described. The technique of threshold determination, the programs (including the new Octopus programs), and the modes of representation of the results are explained. It is shown how one tries top take subjective criteria of the patient, such as attention, intelligence, and ability to concentrate into account during the measurements. The advantages and disadvantages of computerized perimetry are pointed out. It is emphasized that on average the range of scatter of measurements made with the automatic perimeter is smaller than when traditional manual methods are employed. In addition to the accuracy (scatter), the reproducibility (correlation) of the results is also better. Pathologic visual field defects are detected in greater detail and earlier by the automatic static perimeter than by manual perimetry. This applies in particular to early stages of retrobulbar neuritis and glaucoma.

  17. Quantitative perimetry under binocular viewing conditions in microstrabismus

    NARCIS (Netherlands)

    M.V. Joosse (Maurits); H.J. Simonsz (Huib); H.M. van Minderhout; P.T.V.M. de Jong (Paulus); B. Noordzij (Bastiaantje); P.G.H. Mulder (Paul)

    1997-01-01

    textabstractIn order to elucidate the type, size and depth of suppression scotomata in microstrabismus and small angle convergent strabismus, we performed binocular static perimetry in 14 subjects with strabismus and four normal observers. The strabismic cases had an objective angle of convergent

  18. Quantitative perimetry under binocular viewing conditions in microstrabismus

    NARCIS (Netherlands)

    Joosse, M. V.; Simonsz, H. J.; van Minderhout, H. M.; de Jong, P. T.; Noordzij, B.; Mulder, P. G.

    1997-01-01

    In order to elucidate the type, size and depth of suppression scotomata in microstrabismus and small angle convergent strabismus, we performed binocular static perimetry in 14 subjects with strabismus and four normal observers. The strabismic cases had an objective angle of convergent squint between

  19. Static and flicker perimetry in age-related macular degeneration.

    Science.gov (United States)

    Luu, Chi D; Dimitrov, Peter N; Wu, Zhichao; Ayton, Lauren N; Makeyeva, Galina; Aung, Khin-Zaw; Varsamidis, Mary; Robman, Luba; Vingrys, Algis J; Guymer, Robyn H

    2013-05-01

    The relationship between clinical severity of age-related macular degeneration (AMD) and macular function has not been well established. In this study, we investigated the correlation between clinical severity and functional deficits as detected by static and flicker perimetry. This cross-sectional study consisted of 279 AMD subjects and 24 control participants. AMD subjects were allocated into 1 of 10 AMD severity groups depending on the status of the designated study eye and the fellow eye, as assessed by color fundus photographs. Visual acuity, and static and flicker perimetry were tested on one eye during the same session. The geometric means, SDs, and percentage of abnormal eyes of static and flicker sensitivity of each AMD severity group were determined and compared. The pattern of change in sensitivity and percentage of abnormal eyes for static perimetry across all AMD severity groups were similar to flicker perimetry. Eyes with drusen > 125 μm (P[static] = 0.018, P[flicker] = 0.024), drusenoid epithelial detachment (P[static and flicker] flicker] flicker sensitivities compared to normal eyes. Static (β-coefficient -1.59, 95% confidence interval [CI] -4.78-1.60) and flicker (β-coefficient -1.29, 95% CI -4.66-2.08) sensitivities declined at a similar rate in eyes that showed clinical signs of progression. Static and flicker perimetry were affected similarly across the spectrum of AMD severity, and methods appeared to be valid techniques for assessing retinal sensitivity in AMD once drusen > 125 μm are present, but before the development of late AMD.

  20. Feasibility and outcome of automated static perimetry in children using continuous light increment perimetry (CLIP) and fast threshold strategy.

    Science.gov (United States)

    Wabbels, B K; Wilscher, S

    2005-12-01

    Visual field testing in children is always a challenge as testing is hampered by fatigue effects, easy distraction and lack of comprehension. For that reason new testing strategies for automated perimetry have mainly been evaluated on adults. We tested the feasibility and outcome of automated static perimetry in children in a standard clinical setting. Twenty-eight children aged 5-14 years were examined at the Twinfield perimeter, including healthy children, children with unilateral pathologies (normal eye tested) and children with strabismus. Fast threshold strategy (FT) and continuous light increment perimetry (CLIP) strategy were used in a randomized order. One eye per subject was examined and each test was performed twice. Reliable results were obtained in many children starting from the age of 8 years. In children aged 13 years and over, adult testing strategies were possible in most cases with good reproducibility. No significant difference was found between the children with strabismus and the other children. Mean sensitivity (MS) increased and fixation losses decreased as a function of age. Continuous light increment perimetry showed a lower number of abnormal fields and fewer false-positive errors compared to FT. Automated static perimetry is possible in many children in a clinical setting using a commercially available Twinfield perimeter in a session of clinically practical duration. Test performance was not only dependent on age, but also on the child's maturity and ability to concentrate. Especially in children up to the age of 8 years, testing with the ramp stimulus (CLIP) was easier than with a staircase strategy (FT).

  1. Influence of blue light spectrum filter on short-wavelength and standard automated perimetries.

    Science.gov (United States)

    Castro, Leonardo Cunha; de Souza, Carlos Eduardo Barbosa; Soriano, Eduardo Sone; Melo, Luiz Alberto Soares; Paranhos, Augusto

    2006-01-01

    To evaluate the influence of a blue light spectrum filter (BLSF), similar in light spectrum transmittance to the intraocular lens Acrysof Natural, on standard automated perimetry (SAP) and short-wavelength automated perimetry (SWAP). Twenty young individuals (automated perimetry (SAP) and short-wavelength automated perimetry (SWAP) with and without a blue light spectrum filter. All patients had intraocular pressure lower than 21 mmHg, normal fundus biomicroscopy, and no crystalline lens opacity. Foveal threshold (FT), mean deviation (MD), and pattern standard deviation (PSD) indexes obtained from the visual field tests and the difference caused by eccentricity in short-wavelength automated perimetry examinations were analyzed using paired t test. Interindividual variability (standard deviation) was calculated using Pitman's test for correlated samples. Statistically significant reductions in the mean deviation (p automated perimetry with the use of the blue light spectrum filter in comparison to short-wavelength automated perimetry without the use of the blue light spectrum filter were observed, but not in standard automated perimetry exams. No other parameters showed statistically significant differences in the short-wavelength automated perimetry and standard automated perimetry tests. Interindividual standard deviation of the test points in the short-wavelength automated perimetry exams increased with eccentricity both with and without the use of the blue light spectrum filter, as sensitivity for inferior and superior hemifields (inferior hemifield minus superior hemifield), but no statistically significant difference in the variability when comparing the use or not of the blue light spectrum filter was noted. When comparing only the four most inferior points and the four most superior points, the inferior-superior difference increases in both situations - without and with the use of the blue light spectrum filter. The difference between without and with the use

  2. Improved automated perimetry performance following exposure to Mozart.

    Science.gov (United States)

    Fiorelli, V Macedo Batista; Kasahara, N; Cohen, R; França, A Santucci; Della Paolera, M; Mandia, C; de Almeida, G Vicente

    2006-05-01

    To evaluate the performance on automated perimetry (AP) after listening to a Mozart sonata in normal subjects naive to AP. 60 naive normal subjects underwent AP (SITA 24-2). The study group (30 subjects) underwent AP after listening to Mozart's Sonata for Two Pianos in D Major and the control group (30 subjects) underwent AP without previous exposure to the music. The study group had significantly less fixation loss, false positive, and false negative rates compared to controls (p Mozart seems to improve AP performance in normal naive subjects.

  3. Comparison of Threshold Saccadic Vector Optokinetic Perimetry (SVOP) and Standard Automated Perimetry (SAP) in Glaucoma. Part II: Patterns of Visual Field Loss and Acceptability.

    Science.gov (United States)

    McTrusty, Alice D; Cameron, Lorraine A; Perperidis, Antonios; Brash, Harry M; Tatham, Andrew J; Agarwal, Pankaj K; Murray, Ian C; Fleck, Brian W; Minns, Robert A

    2017-09-01

    We compared patterns of visual field loss detected by standard automated perimetry (SAP) to saccadic vector optokinetic perimetry (SVOP) and examined patient perceptions of each test. A cross-sectional study was done of 58 healthy subjects and 103 with glaucoma who were tested using SAP and two versions of SVOP (v1 and v2). Visual fields from both devices were categorized by masked graders as: 0, normal; 1, paracentral defect; 2, nasal step; 3, arcuate defect; 4, altitudinal; 5, biarcuate; and 6, end-stage field loss. SVOP and SAP classifications were cross-tabulated. Subjects completed a questionnaire on their opinions of each test. We analyzed 142 (v1) and 111 (v2) SVOP and SAP test pairs. SVOP v2 had a sensitivity of 97.7% and specificity of 77.9% for identifying normal versus abnormal visual fields. SAP and SVOP v2 classifications showed complete agreement in 54% of glaucoma patients, with a further 23% disagreeing by one category. On repeat testing, 86% of SVOP v2 classifications agreed with the previous test, compared to 91% of SAP classifications; 71% of subjects preferred SVOP compared to 20% who preferred SAP. Eye-tracking perimetry can be used to obtain threshold visual field sensitivity values in patients with glaucoma and produce maps of visual field defects, with patterns exhibiting close agreement to SAP. Patients preferred eye-tracking perimetry compared to SAP. This first report of threshold eye tracking perimetry shows good agreement with conventional automated perimetry and provides a benchmark for future iterations.

  4. The Effect of Cataract on Eye Movement Perimetry

    Directory of Open Access Journals (Sweden)

    G. Thepass

    2015-01-01

    Full Text Available Purpose. To determine how different grades of cataract affect sensitivity threshold and saccadic reaction time (SRT in eye movement perimetry (EMP. Methods. In EMP, the visual field is tested by assessing the saccades that a subject makes towards peripheral stimuli using an eye tracker. Forty-eight cataract patients underwent pre- and postoperative EMP examination in both eyes. The subjects had to fix a central stimulus presented on the eye tracker monitor and to look at any detected peripheral stimulus upon its appearance. A multilevel mixed model was used to determine the factors that affected the sensitivity threshold and the SRT as a function of cataract grade. Results. We found no effect of cataract severity (LOCS III grades I through IV on SRT and the sensitivity thresholds. In cataract of LOCS III grade V, however, we found an increase by 27% and 21% (p<0.001, respectively, compared to the SRT and the sensitivity threshold in LOCS III grade I. Eyes that underwent cataract surgery showed no change in mean SRTs and sensitivity thresholds after surgery in LOCS III grade IV and lower. Conclusion. The present study shows that EMP can be readily used in patients with cataract with LOCS III grade IV and below.

  5. Improved automated perimetry performance in elderly subjects after listening to Mozart

    Directory of Open Access Journals (Sweden)

    Junia Cabral Marques

    2009-01-01

    Full Text Available PURPOSE: To evaluate the performance of automated perimetry of elderly subjects naïve to AP after listening to a Mozart sonata. INTRODUCTION: Automated perimetry (AP is a psychophysical test used to assess visual fields in patients with neurological disorders and glaucoma. In a previous study, Fiorelli et al. showed that young subjects who listened to a Mozart sonata prior to undergoing AP performed better in terms of reliability than those who did not listen to the sonata. METHODS: Fifty-two AP-naïve, normal subjects underwent Automated perimetry (SITA 24-2. The study group (25 subjects underwent AP after listening to Mozart's Sonata for Two Pianos in D Major, and the control group (27 subjects underwent Automated perimetry without prior exposure to the music. RESULTS: The study group had significantly lower false negative rates and a lower visual field reliability score than the controls (P=0.04 and P=0.04, respectively. The test time was shorter for the study group (P=0.03. DISCUSSION: This study shows that elderly subjects, when exposed to the Mozart sonata immediately before AP testing, have lower false negative rates and lower visual field reliability scores when compared with an age- and gender-matched control group. Our results differ from those of Fiorelli et al. who found lower false positive rates and less fixation loss in addition to lower false negative rates. CONCLUSION: Listening to a Mozart sonata seems to improve automated perimetry reliability in elderly subjects.

  6. Improved automated perimetry performance in elderly subjects after listening to Mozart.

    Science.gov (United States)

    Marques, Junia Cabral; Vanessa, Adriana Chaves Oliveira; Fiorelli, Macedo Batista; Kasahara, Niro

    2009-01-01

    To evaluate the performance of automated perimetry of elderly subjects naïve to AP after listening to a Mozart sonata. Automated perimetry (AP) is a psychophysical test used to assess visual fields in patients with neurological disorders and glaucoma. In a previous study, Fiorelli et al. showed that young subjects who listened to a Mozart sonata prior to undergoing AP performed better in terms of reliability than those who did not listen to the sonata. Fifty-two AP-naïve, normal subjects underwent Automated perimetry (SITA 24-2). The study group (25 subjects) underwent AP after listening to Mozart's Sonata for Two Pianos in D Major, and the control group (27 subjects) underwent Automated perimetry without prior exposure to the music. The study group had significantly lower false negative rates and a lower visual field reliability score than the controls (P=0.04 and P=0.04, respectively). The test time was shorter for the study group (P=0.03). This study shows that elderly subjects, when exposed to the Mozart sonata immediately before AP testing, have lower false negative rates and lower visual field reliability scores when compared with an age- and gender-matched control group. Our results differ from those of Fiorelli et al. who found lower false positive rates and less fixation loss in addition to lower false negative rates. Listening to a Mozart sonata seems to improve automated perimetry reliability in elderly subjects.

  7. Exploring Test–Retest Variability Using High-Resolution Perimetry

    Science.gov (United States)

    Maddess, Ted; Matsumoto, Chota; Okuyama, Sachiko; Hashimoto, Shigeki; Nomoto, Hiroki; Shimomura, Yoshikazu

    2017-01-01

    Purpose Test–retest variability (TRV) of visual field (VF) data seriously degrades our capacity to recognize true VF progression. We conducted repeated high-resolution perimetry with a test interval of 0.5° to investigate the sources of TRV. In particular, we examined whether the spatial variance of the observed sensitivity changes or if their absolute magnitude was of more importance. Methods Sixteen eyes of 16 glaucoma patients were each tested three times at 61 VF locations along the superior-temporal 45° meridian using a modified protocol of the Octopus 900 perimeter. TRV was quantified as the standard deviation of the repeats at each point (retest-SD). We also computed the mean sensitivity at each point (retest-MS) and the running spatial-SD along the tested meridian. Multiple regression models investigated whether any of those variables (and also age, sex, and VF eccentricity) were significant independent determinants of TRV. Results The main independent determinants of TRV were the retest-MS at −0.04 dB TRV/dB loss (P retest-SD at 0.47 dB spatial variance/dB loss (P < 0.0001, t-statistic 12.5). Conclusions The larger effect for the spatial-SD suggested that it was perhaps a stronger determinant of TRV than scotoma depth per se. This might support the hypothesis that interactions between small perimetric stimuli, rapidly varying sensitivity across the field, and normal fixational jitter are strong determinants of TRV. Translational Relevance Our study indicates that methods that might reduce the effects of jagged sensitivity changes, such as increasing stimulus size or better gaze tracking, could reduce TRV. PMID:29046828

  8. Exploring Test-Retest Variability Using High-Resolution Perimetry.

    Science.gov (United States)

    Numata, Takuya; Maddess, Ted; Matsumoto, Chota; Okuyama, Sachiko; Hashimoto, Shigeki; Nomoto, Hiroki; Shimomura, Yoshikazu

    2017-09-01

    Test-retest variability (TRV) of visual field (VF) data seriously degrades our capacity to recognize true VF progression. We conducted repeated high-resolution perimetry with a test interval of 0.5° to investigate the sources of TRV. In particular, we examined whether the spatial variance of the observed sensitivity changes or if their absolute magnitude was of more importance. Sixteen eyes of 16 glaucoma patients were each tested three times at 61 VF locations along the superior-temporal 45° meridian using a modified protocol of the Octopus 900 perimeter. TRV was quantified as the standard deviation of the repeats at each point (retest-SD). We also computed the mean sensitivity at each point (retest-MS) and the running spatial-SD along the tested meridian. Multiple regression models investigated whether any of those variables (and also age, sex, and VF eccentricity) were significant independent determinants of TRV. The main independent determinants of TRV were the retest-MS at -0.04 dB TRV/dB loss ( P retest-SD at 0.47 dB spatial variance/dB loss ( P < 0.0001, t -statistic 12.5). The larger effect for the spatial-SD suggested that it was perhaps a stronger determinant of TRV than scotoma depth per se. This might support the hypothesis that interactions between small perimetric stimuli, rapidly varying sensitivity across the field, and normal fixational jitter are strong determinants of TRV. Our study indicates that methods that might reduce the effects of jagged sensitivity changes, such as increasing stimulus size or better gaze tracking, could reduce TRV.

  9. Study of Optimal Perimetric Testing in Children (OPTIC: Feasibility, Reliability and Repeatability of Perimetry in Children.

    Directory of Open Access Journals (Sweden)

    Dipesh E Patel

    Full Text Available To investigate feasibility, reliability and repeatability of perimetry in children.A prospective, observational study recruiting 154 children aged 5-15 years, without an ophthalmic condition that affects the visual field (controls, identified consecutively between May 2012 and November 2013 from hospital eye clinics. Perimetry was undertaken in a single sitting, with standardised protocols, in a randomised order using the Humphrey static (SITA 24-2 FAST, Goldmann and Octopus kinetic perimeters. Data collected included test duration, subjective experience and test quality (incorporating examiner ratings on comprehension of instructions, fatigue, response to visual and auditory stimuli, concentration and co-operation to assess feasibility and reliability. Testing was repeated within 6 months to assess repeatability.Overall feasibility was very high (Goldmann=96.1%, Octopus=89% and Humphrey=100% completed the tests. Examiner rated reliability was 'good' in 125 (81.2% children for Goldmann, 100 (64.9% for Octopus and 98 (63.6% for Humphrey perimetry. Goldmann perimetry was the most reliable method in children under 9 years of age. Reliability improved with increasing age (multinomial logistic regression (Goldmann, Octopus and Humphrey, p<0.001. No significant differences were found for any of the three test strategies when examining initial and follow-up data outputs (Bland-Altman plots, n=43, suggesting good test repeatability, although the sample size may preclude detection of a small learning effect.Feasibility and reliability of formal perimetry in children improves with age. By the age of 9 years, all the strategies used here were highly feasible and reliable. Clinical assessment of the visual field is achievable in children as young as 5 years, and should be considered where visual field loss is suspected. Since Goldmann perimetry is the most effective strategy in children aged 5-8 years and this perimeter is no longer available, further

  10. Towards Patient-Tailored Perimetry: Automated Perimetry Can Be Improved by Seeding Procedures With Patient-Specific Structural Information

    Science.gov (United States)

    Denniss, Jonathan; McKendrick, Allison M.; Turpin, Andrew

    2013-01-01

    Purpose: To explore the performance of patient-specific prior information, for example, from structural imaging, in improving perimetric procedures. Methods: Computer simulation was used to determine the error distribution and presentation count for Structure–Zippy Estimation by Sequential Testing (ZEST), a Bayesian procedure with prior distribution centered on a threshold prediction from structure. Structure-ZEST (SZEST) was trialled for single locations with combinations of true and predicted thresholds between 1 to 35 dB, and compared with a standard procedure with variability similar to Swedish Interactive Thresholding Algorithm (SITA) (Full-Threshold, FT). Clinical tests of glaucomatous visual fields (n = 163, median mean deviation −1.8 dB, 90% range +2.1 to −22.6 dB) were also compared between techniques. Results: For single locations, SZEST typically outperformed FT when structural predictions were within ± 9 dB of true sensitivity, depending on response errors. In damaged locations, mean absolute error was 0.5 to 1.8 dB lower, SD of threshold estimates was 1.2 to 1.5 dB lower, and 2 to 4 (29%–41%) fewer presentations were made for SZEST. Gains were smaller across whole visual fields (SZEST, mean absolute error: 0.5 to 1.2 dB lower, threshold estimate SD: 0.3 to 0.8 dB lower, 1 [17%] fewer presentation). The 90% retest limits of SZEST were median 1 to 3 dB narrower and more consistent (interquartile range 2–8 dB narrower) across the dynamic range than those for FT. Conclusion: Seeding Bayesian perimetric procedures with structural measurements can reduce test variability of perimetry in glaucoma, despite imprecise structural predictions of threshold. Translational Relevance: Structural data can reduce the variability of current perimetric techniques. A strong structure–function relationship is not necessary, however, structure must predict function within ±9 dB for gains to be realized. PMID:24049720

  11. PATTERN ELECTRORETINOGRAPHY IN RELATION TO KINETIC AND STATIC PERIMETRY AND VISUAL ACUITY IN RETINITIS PIGMENTOSA

    Directory of Open Access Journals (Sweden)

    Petra Popović

    2002-12-01

    Full Text Available Background. This study was conducted to assess whether pattern ERG is a sensitive test in evaluating the retinal function in patients with retinitis pigmentosa. We wanted to determine how pattern ERG, reflecting the activity of inner retinal layers, is related to other psychophysical tests such as perimetry and visual acuity.Methods. An analysis was performed on 50 eyes of 25 patients with typical rod-cone retinitis pigmentosa. The standard Snellen visual acuity was tested. Visual field sensitivity was measured with automated static perimetry (Octopus G2 program where mean defect was taken as an index of visual field loss. In kinetic perimetry (Goldmann the average radius of the visual field measured with target II/4 and V/4 was calculated. Transient pattern ERG and all five flash ERG responses were also measured according to ISCEV standards. Amplitudes of pattern ERG P50 and N95 waves were compared to results of visual acuity and visual field testing.Results. In our group of 25 RP patients with visual acuity ranging from 0.16 to 1.0, PERG responses were preserved much better than full field ERGs. 72% of them had still recordable PERG responses, while 48% had cone and only 32% maximal responses. Scotopic rod responses were extinguished in all eyes. The normalized amplitudes of the PERG responses were also much higher (43.5% than cone (22.5% or maximal responses (4.5%. A strong correlation of both P50 and N95 amplitudes with Octopus mean defect index was found. In kinetic perimetry the correlation with PERG amplitudes was also high, but it was better with II/4 than with V/4 target. Patients with high preserved ERG responses had good visual acuity. In all patients with visual acuity less than 0.4 both flash and pattern ERG responses were already absent.Conclusions. This study shows that pattern ERG is an objective and sensitive test in evaluating the functional visual loss in retinitis pigmentosa. Amplitudes of P50 and N95 responses are linearly

  12. Frequency doubling perimetry using a liquid crystal display.

    Science.gov (United States)

    Spry, P G; Gibbs, M L; Johnson, C A; Howard, D L

    2001-03-01

    To compare frequency doubling contrast thresholds using a new liquid crystal window display with those obtained with the commercial video-based Frequency Doubling Technology perimeter. One eye of 49 glaucoma patients and one eye of 49 normal controls were tested with the liquid crystal window and Frequency Doubling Technology systems. Both displays employed identical stimulus conditions and test strategies, although the dynamic range of the liquid crystal window-based display was approximately 30% smaller than that of the Frequency Doubling Technology system. Measurements were repeated using the video-based Frequency Doubling Technology perimeter in a subset of 21 eyes. Relationships between and within displays were assessed using a chance-corrected agreement measure (quadratic weighted kappa) and paired measurement differences. Variability was quantified using standard deviation from the mean paired measurement difference. Over the restricted operating range of the liquid crystal display system, between-display and within-video display variability was 2.3 dB and 3.2 dB, respectively, between-display agreement was 0.66, and within-display agreement (test-retest for Frequency Doubling Technology) was 0.65. Levels of agreement and variability between the two frequency doubling displays were of similar magnitude to repeated (test-retest) Frequency Doubling Technology measures, suggesting that contrast threshold measurements made using the two displays may be used interchangeably. However, the operating range of the current liquid crystal window-based display is smaller.

  13. Relationship between optical coherence tomography, pattern electroretinogram and automated perimetry in eyes with temporal hemianopia from chiasmal compression.

    Science.gov (United States)

    Monteiro, Mário L R; Cunha, Leonardo P; Costa-Cunha, Luciana V F; Maia, Otacílio O; Oyamada, Maria K

    2009-08-01

    To evaluate the relationship between pattern electroretinogram (PERG) amplitude, macular and retinal nerve fiber layer (RNFL) thickness by optical coherence tomography (OCT), and visual field (VF) loss on standard automated perimetry (SAP) in eyes with temporal hemianopia from chiasmal compression. Forty-one eyes from 41 patients with permanent temporal VF defects from chiasmal compression and 41 healthy subjects underwent transient full-field and hemifield (temporal or nasal) stimulation PERG, SAP and time domain-OCT macular and RNFL thickness measurements. Comparisons were made using Student's t-test. Deviation from normal VF sensitivity for the central 18 degrees of VF was expressed in 1/Lambert units. Correlations between measurements were verified by linear regression analysis. PERG and OCT measurements were significantly lower in eyes with temporal hemianopia than in normal eyes. A significant correlation was found between VF sensitivity loss and full-field or nasal, but not temporal, hemifield PERG amplitude. Likewise a significant correlation was found between VF sensitivity loss and most OCT parameters. No significant correlation was observed between OCT and PERG parameters, except for nasal hemifield amplitude. A significant correlation was observed between several macular and RNFL thickness parameters. In patients with chiasmal compression, PERG amplitude and OCT thickness measurements were significant related to VF loss, but not to each other. OCT and PERG quantify neuronal loss differently, but both technologies are useful in understanding structure-function relationship in patients with chiasmal compression. (ClinicalTrials.gov number, NCT00553761).

  14. The influence of the learning effect on automated perimetry in a Turkish population.

    Science.gov (United States)

    Aydin, A; Kocak, I; Aykan, U; Can, G; Sabahyildizi, M; Ersanli, D

    2015-09-01

    To evaluate the influence of learning effect on the outcome of automated perimetry and to assess the factors associated with the learning effect in a Turkish population. The Swedish Interactive Threshold Algorithm (SITA) standard 30-2 test was performed on a Humphrey Visual Field Analyzer in 102 normal Turkish subjects who had not previously undertaken any form of perimetry. Each subject completed three testing sessions, each separated by at least one day. The SITA standard 30-2 testing sessions included both eyes. The right eye was always tested before left eye. The reliability parameters, test duration and visual field (VF) global indices (mean deviation [MD] and pattern standard deviation [PSD]) obtained from right eyes in the first and third sessions were compared to assess the learning effect. Change in these parameters between the first and third sessions was calculated, and the effect of gender, age and educational level on this change was evaluated. The reliability parameters, test duration and VF global indices each improved between the first and third sessions (P ≤ 0.001). The change in the parameters was greater in subjects over 50 years of age and with an educational level less than high school (P ≤ 0.01). No correlation was found between learning effect and gender. In normal Turkish subjects, a significant learning effect was observed during VF testing with the SITA standard 30-2. The learning effect was correlated with age and educational level. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  15. Role of flicker perimetry in predicting onset of late-stage age-related macular degeneration.

    Science.gov (United States)

    Luu, Chi D; Dimitrov, Peter N; Robman, Luba; Varsamidis, Mary; Makeyeva, Galina; Aung, Khin-Zaw; Vingrys, Algis J; Guymer, Robyn H

    2012-06-01

    To investigate the longitudinal changes in flicker perimetry in patients with age-related macular degeneration (AMD) as the condition progresses from early AMD to geographic atrophy (GA) or choroidal neovascularization (CNV). Patients with AMD and control subjects were recruited from a longitudinal study of retinal function in early AMD consisting of 187 participants. Only those who completed at least 4 consecutive, 6-monthly flicker perimetry tests were selected for this study. Study groups consisted of everyone who went on to develop GA (n = 16) or CNV (n = 5), controls (n = 24), and the high-risk, early- AMD participants whose eyes did not progress to GA or CNV (drusen >125 μm; n = 18). The flicker sensitivity was determined, and its rate of change during the 18 months before the clinical detection of late AMD was calculated. Eyes that went on to develop GA or CNV had a significantly reduced mean (SD) flicker sensitivity in the months before clinical detection of GA (15.8 [5.6] dB) or CNV (19.1 [3.8] dB) compared with control eyes (22.9 [3.0] dB) (P flicker sensitivity was significantly increased in GA eyes (-0.07 dB/mo) (P Flicker sensitivity is reduced in eyes that go on to develop late AMD. The rate of change in flicker sensitivities over time was particularly useful in predicting eyes and areas within the eye that subsequently develop GA.

  16. Eccentric fixation in Stargardt's disease assessed by Tübingen perimetry.

    Science.gov (United States)

    Messias, Andre; Reinhard, Jens; Velasco e Cruz, Antonio Augusto; Dietz, Klaus; MacKeben, Manfred; Trauzettel-Klosinski, Susanne

    2007-12-01

    To measure eccentric fixation characteristics in visual fields of patients with Stargardt's disease. The positions of fixation loci (FL) in the visual field were determined by Tübingen perimetry (TP), using the position of the blind spots in 173 patients. Altogether, 669 visual fields were measured at baseline and during follow-up. Twenty patients were also examined by scanning laser ophthalmoscope (SLO). Ninety-five of 173 patients showed a ring scotoma with central fixation in at least one test, which could persist for up to 18.8 years. The median age for a 50% chance of the development of eccentric fixation was 23.6 years. One hundred four patients (203 eyes) used eccentric fixation in at least one eye; in 154 eyes, the FL was placed below the scotoma and in 33 eyes to the left of it, in 11 to the right of it, and in 5 above it. Once the FL was chosen, it remained within the same visual field area at subsequent tests, varying on average by 1.76 degrees. Compared with SLO results, the mean distance between FL and PRL was 1.90 degrees. It is possible to determine the position of the FL by perimetry with sufficient accuracy if the blind spot is well delimited. Stargardt patients can keep central fixation for different time intervals before changing to an eccentric FL. Most of them show an FL below the central scotoma, which is considered favorable for horizontal reading.

  17. Automated Light- and Dark-Adapted Perimetry for Evaluating Retinitis Pigmentosa: Filling a Need to Accommodate Multicenter Clinical Trials.

    Science.gov (United States)

    McGuigan, David B; Roman, Alejandro J; Cideciyan, Artur V; Matsui, Rodrigo; Gruzensky, Michaela L; Sheplock, Rebecca; Jacobson, Samuel G

    2016-06-01

    The purpose of this study was to develop a convenient means to measure rod (and cone) function by automated perimetry in patients with inherited retinal degenerations (IRDs). A currently available automated perimeter was used to determine sensitivity (in decibels) to a blue target in the dark-adapted (DA) state and a white target in the light-adapted (LA) state. Normal subjects and IRD patients were evaluated with a full-threshold 71-locus strategy (the retinitis pigmentosa [RP] test) and a size III target. Comparisons were made with results from the more commonly used methods of two-color DA perimetry and middle/long-wavelength LA perimetry in the same patients. Rod function using the blue target and the RP test was determined for normal subjects by measuring DA sensitivities. If patients detected the blue stimulus in the DA state, it was determined whether the value was rod mediated by using normal data acquired during the cone plateau phase of dark adaptation. If rod mediated, rod sensitivity loss (RSL) was calculated and mapped across the visual field. Light-adapted sensitivities in normal subjects were also measured, permitting cone sensitivity losses (CSL) to be calculated for the patients. Multiple methods were used to compare RSL and CSL results with those from two-color DA perimetry and chromatic LA perimetry, and there was close correspondence between the methods. The unmodified automated static perimeter used in the DA and LA states presents a practical approach to accomplish current goals of treatment trials in IRDs. This proof-of-principle study is an initial step toward establishing a clinical method to gather reproducible data on photoreceptor-mediated sensitivity.

  18. Learning effect and repeatability of automated kinetic perimetry in healthy participants.

    Science.gov (United States)

    Hirasawa, Kazunori; Shoji, Nobuyuki

    2014-09-01

    To evaluate the learning effect and repeatability of automated kinetic perimetry in inexperienced and experienced healthy young participants. Forty-six eyes of 46 healthy participants (23 eyes of 23 participants in the inexperienced group and 23 eyes of 23 participants in the experienced group; mean age, 25.9 years) were enrolled in this prospective study. Automated kinetic perimetry was performed using the Octopus 900 perimeter with Goldmann stimuli III4e, I4e, I3e, I2e and I1e. The participants underwent testing at 14 predetermined meridians for each stimulus with a stimulus velocity of 3°/s. The learning effect was evaluated for kinetic sensitivity and test duration using three measurements. Repeatability was evaluated by calculating the mean square (MS) and coefficient of variance (CoV) of the kinetic sensitivity between the second and third measurements. A learning effect was seen only in the inexperienced group between the first and second measurements. The kinetic sensitivity for III4e and I4e increased by 1.5° (p learning effect in the inexperienced and experienced groups between the second and third measurements. Regarding the repeatability in the inexperienced and experienced groups, the MS and CoV values of the kinetic sensitivity for I3e, I2e and I1e increased by a median of 1.2-2.7° (p < 0.01) and 1.6-13.6% (p < 0.01), respectively, compared with those of III4e and I4e. The results of the first measurement in the inexperienced participants require careful evaluation, especially for III4e and I4e measured in the peripheral areas. However, because III4e and I4e both showed good repeatability in inexperienced and experienced participants, automated kinetic perimetry may be suitable for measuring the peripheral area using higher stimulus intensities such as III4e and I4e.

  19. Effects of different levels of intraocular stray light on kinetic perimetry findings.

    Directory of Open Access Journals (Sweden)

    Kazunori Hirasawa

    Full Text Available To evaluate the effect of different levels of intraocular stray light on kinetic perimetry findings.Twenty-five eyes of 25 healthy young participants were examined by automated kinetic perimetry (Octopus 900 using Goldmann stimuli III4e, I4e, I3e, I2e, and I1e. Each stimulus was presented with a velocity of 3°/s at 24 meridians with 15° intervals. Four levels of intraocular stray light were induced using non-white opacity filter (WOF filters and WOFs applied to the clear plastic eye covers of the participants. The visual acuity, pupil diameter, isopter area, and kinetic sensitivity of each meridian were analyzed for each WOF density.Visual acuity deteriorated with increasing WOF densities (p < 0.01. With a visual acuity of 0.1 LogMAR units, the isopter areas for III4e, I4e, I3e, I2e, and I1e decreased by -32.7 degree2 (-0.2%, -255.7 degree2 (-2.6%, -381.2 degree2 (-6.2%, -314.8 degree2 (-12.8%, and -59.2 degree2 (-15.2%, respectively; kinetic sensitivity for those stimuli decreased by -0.1 degree (-0.1%, -0.8 degree (-1.4%, -1.6 degree (-3.7%, -2.7 degree (-9.7%, and -1.7 degree (-16.2%, respectively. The pupil diameter with each WOF density was not significantly different.Kinetic perimetry measurements with a high-intensity stimulus (i.e., III4e were unaffected by intraocular stray light. In contrast, measurements with the I4e, I3e, I2e, and I1e stimuli, especially I2e and I1e, were affected. Changes in the shape of the isopter resulting from opacity must be monitored, especially in cases of smaller and lower-intensity stimuli.

  20. Visual discrimination training improves Humphrey perimetry in chronic cortically induced blindness.

    Science.gov (United States)

    Cavanaugh, Matthew R; Huxlin, Krystel R

    2017-05-09

    To assess if visual discrimination training improves performance on visual perimetry tests in chronic stroke patients with visual cortex involvement. 24-2 and 10-2 Humphrey visual fields were analyzed for 17 chronic cortically blind stroke patients prior to and following visual discrimination training, as well as in 5 untrained, cortically blind controls. Trained patients practiced direction discrimination, orientation discrimination, or both, at nonoverlapping, blind field locations. All pretraining and posttraining discrimination performance and Humphrey fields were collected with online eye tracking, ensuring gaze-contingent stimulus presentation. Trained patients recovered ∼108 degrees 2 of vision on average, while untrained patients spontaneously improved over an area of ∼16 degrees 2 . Improvement was not affected by patient age, time since lesion, size of initial deficit, or training type, but was proportional to the amount of training performed. Untrained patients counterbalanced their improvements with worsening of sensitivity over ∼9 degrees 2 of their visual field. Worsening was minimal in trained patients. Finally, although discrimination performance improved at all trained locations, changes in Humphrey sensitivity occurred both within trained regions and beyond, extending over a larger area along the blind field border. In adults with chronic cortical visual impairment, the blind field border appears to have enhanced plastic potential, which can be recruited by gaze-controlled visual discrimination training to expand the visible field. Our findings underscore a critical need for future studies to measure the effects of vision restoration approaches on perimetry in larger cohorts of patients. Copyright © 2017 The Author(s). Published by Wolters Kluwer Health, Inc. on behalf of the American Academy of Neurology.

  1. Central retinal function as measured by the multifocal electroretinogram and flicker perimetry in early age-related macular degeneration.

    Science.gov (United States)

    Gin, Thomas J; Luu, Chi D; Guymer, Robyn H

    2011-11-29

    To determine the retinal function in early age-related macular degeneration (AMD) assessed by the multifocal electroretinogram (mfERG) and flicker perimetry and to seek a relationship between local objective mfERG parameters and subjective flicker perimetry thresholds. mfERG and flicker perimetry were performed in 15 patients (15 eyes) with early AMD and 14 controls (14 eyes) of similar age. The mfERG P1 response amplitude density (nV/deg²) and P1 implicit time of the first-order kernel and the flicker thresholds of each concentric ring were analyzed. The relationship between individual mfERG responses and the corresponding individual flicker sensitivity outcomes was determined. The mfERG response amplitude of the central ring (ring 1) was significantly reduced in early AMD eyes compared with the controls (P = 0.009). No significant difference in mfERG amplitude between early AMD and control eyes was detected in the other rings. The mfERG implicit time was significantly increased in the early AMD eyes but only within the central four rings of 12°. A significant reduction in flicker sensitivity was also detected in early AMD eyes but only within the central 6°. There was a significant, moderate correlation (r = -0.477; P flicker sensitivity from the same tested locations within the central 6°. There was a weak correlation (r = 0.200; P = 0.014) between mfERG amplitude and flicker sensitivity. Both mfERG and flicker perimetry show abnormal retinal function, but only in the very central macula, in early AMD. A novel relationship between mfERG and flicker sensitivity should enhance the clinical monitoring of disease progression.

  2. Sequentially optimized reconstruction strategy: A meta-strategy for perimetry testing.

    Directory of Open Access Journals (Sweden)

    Şerife Seda Kucur

    Full Text Available Perimetry testing is an automated method to measure visual function and is heavily used for diagnosing ophthalmic and neurological conditions. Its working principle is to sequentially query a subject about perceived light using different brightness levels at different visual field locations. At a given location, this query-patient-feedback process is expected to converge at a perceived sensitivity, such that a shown stimulus intensity is observed and reported 50% of the time. Given this inherently time-intensive and noisy process, fast testing strategies are necessary in order to measure existing regions more effectively and reliably. In this work, we present a novel meta-strategy which relies on the correlative nature of visual field locations in order to strongly reduce the necessary number of locations that need to be examined. To do this, we sequentially determine locations that most effectively reduce visual field estimation errors in an initial training phase. We then exploit these locations at examination time and show that our approach can easily be combined with existing perceived sensitivity estimation schemes to speed up the examinations. Compared to state-of-the-art strategies, our approach shows marked performance gains with a better accuracy-speed trade-off regime for both mixed and sub-populations.

  3. Comparing the Structure-Function Relationship at the Macula With Standard Automated Perimetry and Microperimetry.

    Science.gov (United States)

    Rao, Harsha L; Januwada, Manideepak; Hussain, Raza S M; Pillutla, Lalitha N; Begum, Viquar U; Chaitanya, Aditya; Senthil, Sirisha; Garudadri, Chandra S

    2015-12-01

    To compare the structure-function relationship between ganglion cell-inner plexiform layer (GCIPL) thickness measurements using spectral-domain optical coherence tomography (SDOCT) and visual sensitivities measured using standard automated perimetry (SAP) and microperimetry (MP) at the macula in glaucoma. In a prospective study, 45 control eyes (29 subjects) and 60 glaucoma eyes (45 patients) underwent visual sensitivity estimation at the macula (central 10°) by SAP and MP, and GCIPL thickness measurement at the macula by SDOCT. Structure-function relationships between GCILP thickness and visual sensitivity loss with SAP and MP at various macular sectors were assessed using the Hood and Kardon model. To compare structure-function relationship with SAP and MP, we calculated the number of data points falling outside the 5th and the 95th percentile values of the Hood and Kardon model with each of the perimeters. The number of points falling outside the 5th and 95th percentile values of the Hood and Kardon model ranged from 28 (superior sector) to 48 (inferonasal sector) with SAP and 33 (superior sector) to 49 (inferonasal sector) with MP. The difference in the number of points falling outside the 5th and 95th percentile values with SAP and MP was statistically insignificant (P > 0.05, χ(2) test) for all the sectors. Visual sensitivity measurements of both SAP and MP demonstrated a similar relationship with the GCIPL measurements of SDOCT at the macula in glaucoma.

  4. Performance of iPad-based threshold perimetry in glaucoma and controls.

    Science.gov (United States)

    Schulz, Angela M; Graham, Elizabeth C; You, YuYi; Klistorner, Alexander; Graham, Stuart L

    2017-10-04

    Independent validation of iPad visual field testing software Melbourne Rapid Fields (MRF). To examine the functionality of MRF and compare its performance with Humphrey SITA 24-2 (HVF). Prospective, cross-sectional validation study. Sixty glaucomas (MD:-5.08±5.22); 17 pre-perimetric, 43 HVF field defects and 25 controls. The MRF was compared with HVF for scotoma detection, global indices, regional mean threshold values and sensitivity/specificity. Long-term test-retest variability was assessed after 6 months. Linear regression and Bland Altman analyses of global indices sensitivity/specificity using ROC curves, intraclass correlations. Using a cluster definition of three points at <1% or two at 0.5% to define a scotoma on HVF, MRF detected 39/54 abnormal hemifields with a similar threshold-based criteria. Global indices were highly correlated between MRF and HVF: MD r 2 = 0.80, PSD r 2 = 0.77, VFI r 2 = 0.85 (all P < 0.0001). For manifest glaucoma patients, correlations of regional mean thresholds ranged from r 2 = 0.45-0.78, despite differing array of tested points between devices. ROC analysis of global indices showed reasonable sensitivity/specificity with AUC values of MD:0.89, PSD:0.85 and VFI:0.88. MRF retest variability was low with ICC values at 0.95 (MD and VFI), 0.94 (PSD). However, individual test point variability for mid-range thresholds was higher. MRF perimetry, despite using a completely different test paradigm, shows good performance characteristics compared to HVF for detection of defects, correlation of global indices and regional mean threshold values. Reproducibility for individual points may limit application for monitoring change over time, and fixation monitoring needs improvement. © 2017 Royal Australian and New Zealand College of Ophthalmologists.

  5. Test-Retest Variability of Fundus-Tracked Perimetry at the Peripapillary Region in Open Angle Glaucoma.

    Science.gov (United States)

    Wu, Zhichao; McKendrick, Allison M; Hadoux, Xavier; Gaskin, Jennifer C Fan; Ang, Ghee Soon; Sarossy, Marc G; Crowston, Jonathan G

    2016-07-01

    To examine the association between the measured level and local gradient of visual sensitivity on the magnitude of test-retest variability of its measurements at the peripapillary region using fundus-tracked perimetry in eyes with glaucoma. A total of 30 participants with open angle glaucoma underwent three examinations in one eye on fundus-tracked perimetry using a stimulus pattern that sampled the peripapillary region densely. Factors associated with the magnitude of test-retest variability at each location were examined. There was no significant change in average pointwise sensitivity (PWS) between tests 1 and 2 (P = 0.855), but a significant reduction between tests 2 and 3 (P tests 1 and 2. Multivariate analyses revealed that the magnitude of test-retest variability at a given location was significantly associated with its average sensitivity and gradient of sensitivity relative to the immediately adjacent locations (P ≤ 0.001), meaning that locations with low levels of sensitivity (4-18 dB) with low gradients of sensitivity (test-retest limit of ±5.83 dB, compared to a limit of ±10.65 dB in areas of high gradients of sensitivity (>4 dB/location). On a pointwise basis, the test-retest variability of visual sensitivity in glaucoma is not just related to its measured level, but also its local gradient when using fundus-tracked perimetry. Locations with low sensitivity do not necessarily demonstrate very high test-retest variability, depending on the local uniformity of visual field damage.

  6. Learning effect, normal range, and test-retest variability of Frequency Doubling Perimetry as a function of age, perimetric experience, and the presence or absence of glaucoma

    NARCIS (Netherlands)

    Heeg, GP; Ponsioen, TL; Jansonius, NM

    2003-01-01

    The learning effect for several different Frequency Doubling Perimetry parameters was studied in full threshold mode in a large group of patients (n = 342) of various ages, with and without perimetric experience, and with and without glaucoma. A significant learning effect was only found for the

  7. Sensitivity and specificity of machine learning classifiers for glaucoma diagnosis using Spectral Domain OCT and standard automated perimetry

    Directory of Open Access Journals (Sweden)

    Fabrício R. Silva

    2013-06-01

    Full Text Available PURPOSE: To evaluate the sensitivity and specificity of machine learning classifiers (MLCs for glaucoma diagnosis using Spectral Domain OCT (SD-OCT and standard automated perimetry (SAP. METHODS: Observational cross-sectional study. Sixty two glaucoma patients and 48 healthy individuals were included. All patients underwent a complete ophthalmologic examination, achromatic standard automated perimetry (SAP and retinal nerve fiber layer (RNFL imaging with SD-OCT (Cirrus HD-OCT; Carl Zeiss Meditec Inc., Dublin, California. Receiver operating characteristic (ROC curves were obtained for all SD-OCT parameters and global indices of SAP. Subsequently, the following MLCs were tested using parameters from the SD-OCT and SAP: Bagging (BAG, Naive-Bayes (NB, Multilayer Perceptron (MLP, Radial Basis Function (RBF, Random Forest (RAN, Ensemble Selection (ENS, Classification Tree (CTREE, Ada Boost M1(ADA,Support Vector Machine Linear (SVML and Support Vector Machine Gaussian (SVMG. Areas under the receiver operating characteristic curves (aROC obtained for isolated SAP and OCT parameters were compared with MLCs using OCT+SAP data. RESULTS: Combining OCT and SAP data, MLCs' aROCs varied from 0.777(CTREE to 0.946 (RAN.The best OCT+SAP aROC obtained with RAN (0.946 was significantly larger the best single OCT parameter (p<0.05, but was not significantly different from the aROC obtained with the best single SAP parameter (p=0.19. CONCLUSION: Machine learning classifiers trained on OCT and SAP data can successfully discriminate between healthy and glaucomatous eyes. The combination of OCT and SAP measurements improved the diagnostic accuracy compared with OCT data alone.

  8. Analysis of Visual Field Defects Obtained with Semiautomated Kinetic Perimetry in Patients with Leber Hereditary Optic Neuropathy

    Directory of Open Access Journals (Sweden)

    Katarzyna Nowomiejska

    2018-01-01

    Full Text Available Purpose. To analyse visual field (VF defects obtained using semiautomated kinetic perimetry (SKP in patients suffering from Leber hereditary optic neuropathy (LHON. Methods. Twenty-two eyes of eleven consecutive LHON male patients with confirmed mitochondrial 11778G>A DNA mutation were prospectively examined with the V4e stimulus of SKP in both eyes. The mean time after the onset of LHON was one year. The area of obtained isopters was measured in square degrees (deg2. Additionally, static automated perimetry (SAP within 30° was performed. Results. Visual acuity ranged from counting fingers to 50 cm to 0.4. VFs obtained with SKP showed central scotomas in 18 eyes (82%; the periphery of the VF in these eyes remained intact. The mean area of central scotoma was 408.8 deg2, and the mean area of the peripheral VF was 12291.1 deg2; SAP also revealed central scotoma in these patients. In four eyes (18% with the worst visual acuity, only the residual central island of VF was found using SKP (mean area 898.4 deg2. SAP was difficult to obtain in these patients. Conclusions. SKP provides additional clinical information in regard to the visual function of LHON patients. SKP enables the quantification of the area of central scotoma, preserved peripheral VF, and residual central island of vision. Using V4 stimulus is especially useful in LHON patients with poor visual acuity, when SAP is difficult to obtain.

  9. Relationship between short-wavelength automatic perimetry and Heidelberg retina tomograph parameters in eyes with ocular hypertension

    Directory of Open Access Journals (Sweden)

    Christos Pitsas

    2015-10-01

    Full Text Available AIM:To compare and correlate optic nerve head parameters obtained byHeidelberg retina tomograph (HRT with short-wavelength automatic perimetry (SWAP indices in eyes with ocular hypertension (OHT.METHODS: One hundred and forty-six patients with OHT included in the present study. All subjects had reliable SWAP and HRT measurements performed within a 2wk period. The eyes were classified as normal/abnormal according to visual field criteria and Moorfields regression analysis (MRA. Correlations between visual field indices and HRT parameters were analyzed using Pearson correlation coefficient (r.RESULTS:Twenty-nine eyes (19.9% had SWAP defects. Twenty-nine eyes (19.9% were classified as abnormal according to global MRA. Six eyes (4.1% had abnormal global MRA and SWAP defects. The k statistic is 0.116 (P=0.12 indicating a very poor agreement between the methods. No statistical significant correlation between HRT and SWAP parameters was detected.CONCLUSION:SWAP defects may coexist with abnormalities of optic disc detected by HRT in eyes with OHT. In most eyes, however, the two methods detect different glaucoma properties.

  10. The Effective Dynamic Ranges for Glaucomatous Visual Field Progression With Standard Automated Perimetry and Stimulus Sizes III and V.

    Science.gov (United States)

    Wall, Michael; Zamba, Gideon K D; Artes, Paul H

    2018-01-01

    It has been shown that threshold estimates below approximately 20 dB have little effect on the ability to detect visual field progression in glaucoma. We aimed to compare stimulus size V to stimulus size III, in areas of visual damage, to confirm these findings by using (1) a different dataset, (2) different techniques of progression analysis, and (3) an analysis to evaluate the effect of censoring on mean deviation (MD). In the Iowa Variability in Perimetry Study, 120 glaucoma subjects were tested every 6 months for 4 years with size III SITA Standard and size V Full Threshold. Progression was determined with three complementary techniques: pointwise linear regression (PLR), permutation of PLR, and linear regression of the MD index. All analyses were repeated on "censored'' datasets in which threshold estimates below a given criterion value were set to equal the criterion value. Our analyses confirmed previous observations that threshold estimates below 20 dB contribute much less to visual field progression than estimates above this range. These findings were broadly similar with stimulus sizes III and V. Censoring of threshold values < 20 dB has relatively little impact on the rates of visual field progression in patients with mild to moderate glaucoma. Size V, which has lower retest variability, performs at least as well as size III for longitudinal glaucoma progression analysis and appears to have a larger useful dynamic range owing to the upper sensitivity limit being higher.

  11. Multifocal Visual Evoked Potential in Eyes With Temporal Hemianopia From Chiasmal Compression: Correlation With Standard Automated Perimetry and OCT Findings.

    Science.gov (United States)

    Sousa, Rafael M; Oyamada, Maria K; Cunha, Leonardo P; Monteiro, Mário L R

    2017-09-01

    To verify whether multifocal visual evoked potential (mfVEP) can differentiate eyes with temporal hemianopia due to chiasmal compression from healthy controls. To assess the relationship between mfVEP, standard automated perimetry (SAP), and Fourier domain-optical coherence tomography (FD-OCT) macular and peripapillary retinal nerve fiber layer (RNFL) thickness measurements. Twenty-seven eyes with permanent temporal visual field (VF) defects from chiasmal compression on SAP and 43 eyes of healthy controls were submitted to mfVEP and FD-OCT scanning. Multifocal visual evoked potential was elicited using a stimulus pattern of 60 sectors and the responses were averaged for the four quadrants and two hemifields. Optical coherence tomography macular measurements were averaged in quadrants and halves, while peripapillary RNFL thickness was averaged in four sectors around the disc. Visual field loss was estimated in four quadrants and each half of the 24-2 strategy test points. Multifocal visual evoked potential measurements in the two groups were compared using generalized estimated equations, and the correlations between mfVEP, VF, and OCT findings were quantified. Multifocal visual evoked potential-measured temporal P1 and N2 amplitudes were significantly smaller in patients than in controls. No significant difference in amplitude was observed for nasal parameters. A significant correlation was found between mfVEP amplitudes and temporal VF loss, and between mfVEP amplitudes and the corresponding OCT-measured macular and RNFL thickness parameters. Multifocal visual evoked potential amplitude parameters were able to differentiate eyes with temporal hemianopia from controls and were significantly correlated with VF and OCT findings, suggesting mfVEP is a useful tool for the detection of visual abnormalities in patients with chiasmal compression.

  12. The role of hemifield sector analysis in multifocal visual evoked potential objective perimetry in the early detection of glaucomatous visual field defects

    Directory of Open Access Journals (Sweden)

    Mousa MF

    2013-05-01

    Full Text Available Mohammad F Mousa,1 Robert P Cubbidge,2 Fatima Al-Mansouri,1 Abdulbari Bener3,41Department of Ophthalmology, Hamad Medical Corporation, Doha, Qatar; 2School of Life and Health Sciences, Aston University, Birmingham, UK; 3Department of Medical Statistics and Epidemiology, Hamad Medical Corporation, Department of Public Health, Weill Cornell Medical College, Doha, Qatar; 4Department Evidence for Population Health Unit, School of Epidemiology and Health Sciences, University of Manchester, Manchester, UKObjective: The purpose of this study was to examine the effectiveness of a new analysis method of mfVEP objective perimetry in the early detection of glaucomatous visual field defects compared to the gold standard technique.Methods and patients: Three groups were tested in this study; normal controls (38 eyes, glaucoma patients (36 eyes, and glaucoma suspect patients (38 eyes. All subjects underwent two standard 24-2 visual field tests: one with the Humphrey Field Analyzer and a single mfVEP test in one session. Analysis of the mfVEP results was carried out using the new analysis ­protocol: the hemifield sector analysis protocol.Results: Analysis of the mfVEP showed that the signal to noise ratio (SNR difference between superior and inferior hemifields was statistically significant between the three groups (analysis of variance, P < 0.001 with a 95% confidence interval, 2.82, 2.89 for normal group; 2.25, 2.29 for glaucoma suspect group; 1.67, 1.73 for glaucoma group. The difference between superior and inferior hemifield sectors and hemi-rings was statistically significant in 11/11 pair of sectors and hemi-rings in the glaucoma patients group (t-test P < 0.001, statistically significant in 5/11 pairs of sectors and hemi-rings in the glaucoma suspect group (t-test P < 0.01, and only 1/11 pair was statistically significant (t-test P < 0.9. The sensitivity and specificity of the hemifield sector analysis protocol in detecting glaucoma was 97% and 86

  13. Perimetria computadorizada e manual em pacientes com defeitos perimétricos temporais avançados causados por tumores supra-selares Computerized and manual perimetry in patientes with severe temporal visual field defects due to supraselar tumors

    Directory of Open Access Journals (Sweden)

    Andrea Pereira

    2005-10-01

    Full Text Available OBJETIVO: Estudar, ao perímetro de Goldmann, um grupo de pacientes com hemianopsia completa ao perímetro Humphrey (24-2 full threshold test, e verificar em quantos casos a perimetria computadorizada deixou de identificar a presença de campo visual periférico residual. MÉTODOS: Dezenove pacientes com defeitos campimétricos por compressão quiasmática foram estudados prospectivamente por meio das perimetrias manual e computadorizada. Vinte e cinco olhos com hemianopsia temporal completa pelo programa 24-2 do Humphrey Field Analyzer foram selecionados e estudados pela perimetria manual de Goldmann para avaliar a presença de campo visual periférico residual. De acordo com os resultados ao perímetro de Goldmann, os olhos foram divididos em 2 grupos: grupo 1, os portadores de hemianopsia temporal completa ao Goldmann e grupo 2, os portadores de campo visual temporal periférico residual. Foi calculada a média do "mean deviation" fornecido pelo aparelho nos dois grupos e o resultado foi comparado pelo teste t de Student. RESULTADOS: A perimetria computadorizada deixou de identificar a presença de campo visual periférico residual em 17 dos 25 olhos (68%. Os valores médios do "mean deviation" no grupo 1 e grupo 2 foram respectivamente -15,43 e -15,93. O estudo estatístico não mostrou diferença significativa entre os dois valores. CONCLUSÕES: A perimetria computadorizada Humphrey com o programa 24-2 threshold test deixa de identificar remanescentes temporais de campo visual em grande porcentagem de pacientes com compressão quiasmática grave. A análise do "mean deviation" fornecido pelo aparelho não permite identificar estes casos. Pacientes estudados ao perímetro automático e apresentando hemianopsia temporal completa, devem complementar sua avaliação perimétrica com a pesquisa por áreas remanescentes no campo visual temporal.PURPOSE: To study, on Goldmann perimetry, a group of patients with complete temporal hemianopia on

  14. Perimetria azul-amarelo em usuários de tabaco-álcool Blue-on-yellow perimetry in tobacco and alcohol consumers

    Directory of Open Access Journals (Sweden)

    José Fernando de Carvalho Júnior

    2006-10-01

    Full Text Available OBJETIVO: Avaliar as alterações de campo visual em usuários crônicos de tabaco e álcool por meio da perimetria azul-amarelo estratégia 10-2. MÉTODOS: Quarenta e dois olhos de vinte e um voluntários usuários de tabaco e álcool, todos do gênero masculino, foram selecionados após exame oftalmológico completo e normal, sendo submetidos a perimetria azul-amarelo estratégia 10-2. Quinze voluntários participaram do grupo controle. A análise dos dados foi realizada mediante gráfico da profundidade do defeito e número de pontos alterados. RESULTADOS: Observou-se que 40 olhos (95,3% dos usuários crônicos de tabaco e álcool, apresentaram maior freqüência de alterações no gráfico de profundidade do defeito (>10dB e 27 olhos (64,3% apresentaram número de pontos alterados (>10 pontos, (pPURPOSE: To evaluate the visual field changes in blue-on-yellow perimetry (B/Y strategy 10-2 in alcohol and tobacco smoking consumers. METHODS: Forty-two eyes of twenty-one users were studied. Fifteen individuals were used as a control group. All volunteers were males. After normal ophthalmologic examinations, central 10-2 (B/Y was performed in both eyes. Analysis of the results was performed through the alterations in the depth graph defect and number of altered points. RESULTS: It was found that the majority of the chronic alcohol and tobacco smoking consumers had a greater frequency of alterations in the depth graph defect; 40 eyes (95.3%, (>10dB, and 27 eyes (64.3% showed a number of altered points, (>10 points, (p<0.0001. All those who were used as a control group showed alterations in the depth graph defect and number of altered points, but had less than 10dB and 10 altered points, respectively. CONCLUSION: A higher number of abnormal points and depth graph defects and number of altered points were observed in alcohol and tobacco smoking consumers reflecting a higher number of alterations in the cells of the parvocellular system, responsible

  15. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  16. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  17. [Practical aspects of automated perimetry].

    Science.gov (United States)

    Stan, Cristina

    2014-01-01

    Visual field testing is a subjective method, but yet a very important part for diagnosis and in follow-up of ocular or neurological diseases. In order to do a correct exam of the visual field, one must know well the equipment and all the factors that could induce errors. Basic skills for working with Optopol or Humphrey perimeter are discussed in this paper.

  18. Effect of aspherical and yellow tinted intraocular lens on blue-on-yellow perimetry Efeito das lentes intraoculares asféricas e com pigmentação amarela na campimetria azul-amarelo

    Directory of Open Access Journals (Sweden)

    Rodrigo França de Espíndola

    2012-10-01

    Full Text Available PURPOSE: To investigate the possible effect of aspherical or yellow tinted intraocular lens (IOL on contrast sensitivity and blue-on-yellow perimetry. METHODS: This prospective randomized bilateral double-masked clinical study included 52 patients with visually significant bilateral cataracts divided in two groups; 25 patients (50 eyes received aspherical intraocular lens in one eye and spherical intraocular lens in the fellow eye; and 27 patients (54 eyes received ultraviolet and blue light filter (yellow tinted IOL implantation in one eye and acrylic ultraviolet filter IOL in the fellow eye. The primary outcome measures were contrast sensitivity and blue-on-yellow perimetry values (mean deviation [MD] and pattern standard deviation [PSD] investigated two years after surgery. The results were compared intra-individually. RESULTS: There was a statistically significant between-group (aspherical and spherical intraocular lens difference in contrast sensitivity under photopic conditions at 12 cycles per degree and under mesopic conditions at all spatial frequencies. There were no between-group significant differences (yellow tinted and clear intraocular lens under photopic or mesopic conditions. There was no statistically significant difference between all intraocular lens in MD or PSD. CONCLUSION: Contrast sensitivity was better under mesopic conditions with aspherical intraocular lens. Blue-on-yellow perimetry did not appear to be affected by aspherical or yellow tinted intraocular lens. Further studies with a larger sample should be carried out to confirm or not that hypotheses.OBJETIVO: Investigar a possibilidade de efeitos na sensibilidade ao contraste e nos resultados da campimetria azul-amarelo com implante de uma lente intraocular (LIO asférica ou de pigmentação amarela. MÉTODOS: Trata-se de um estudo prospectivo, randomizado, duplo-mascarado, envolvendo 52 pacientes portadores de catarata senil bilateral, divididos em dois grupos; 25

  19. Influence of blue light spectrum filter on short-wavelength and standard automated perimetries Influência de filtro para o espectro azul da luz na perimetria computadorizada branco-branco e azul-amarelo

    Directory of Open Access Journals (Sweden)

    Leonardo Cunha Castro

    2006-10-01

    Full Text Available PURPOSE: To evaluate the influence of a blue light spectrum filter (BLSF, similar in light spectrum transmittance to the intraocular lens Acrysof NaturalTM, on standard automated perimetry (SAP and short-wavelength automated perimetry (SWAP. METHODS: Twenty young individuals (OBJETIVO: Avaliar a influência de um filtro para o espectro azul da luz, semelhante à lente intra-ocular Acrysof Natural®, nos exames de perimetria automatizada padrão (branco-no-branco e de comprimento de onda curto (azul-no-amarelo. MÉTODOS: Vinte pacientes jovens sem alterações oculares (20 olhos realizaram seqüência de 4 exames de campo visual: perimetria automatizada padrão e azul-no-amarelo com e sem o filtro para o espectro azul da luz. Os índices de limiar foveal (FT, desvio médio (MD e desvio-padrão (PSD obtidos em todos os exames e a diferença causada pela excentricidade nos exames de perimetria automatizada azul-no-amarelo foram analisados. Variabilidade interindivíduos (desvio-padrão dos pontos testados foi calculada. RESULTADOS: Observou-se redução estatisticamente significante no desvio médio (p<0.001 e no limiar foveal (p<0.001 medidos pela perimetria automatizada azul-no-amarelo com o uso do filtro para o espectro azul da luz comparado quando realizado sem o filtro. Nenhum outro índice avaliado apresentou diferença estatisticamente significante nos exames de perimetria automatizada padrão ou azul-no-amarelo. Foi notado aumento da variabilidade interindivíduos com a excentricidade nos exames de perimetria automatizada azul-no-amarelo com e sem o uso do filtro para o espectro azul da luz, assim como a diferença de sensibilidade entre os hemisférios inferior e superior (hemisfério inferior menos superior, mas não houve diferença estatisticamente significante quando comparados os exames com e sem o uso do filtro. Quando foram comparados os 4 pontos mais inferiores e os 4 pontos mais superiores, a diferença inferior-superior aumentou

  20. A comparison of cupola-free perimetry with conventional perimetry: preliminary results.

    Science.gov (United States)

    Jenni, A; Hirsbrunner, H P

    1990-01-01

    In the comparison of ten normal and two pathological visual fields, excellent agreement was found between examinations made with Octopus perimeters (types 201 and 500) and a prototype version of a new cupola-free perimeter (CFPP). The examination of a single glaucomatous visual field, however, exhibited an elevated mean defect value with the prototype instrument in comparison with Octopus 201 examinations of the same visual field. Although this difference may be easily explained by long-term fluctuation effects, further investigations based on a broader empirical basis will be required. Based on the results of this preliminary work the following remarks can be made with respect to the cupola-free perimeter: provided that the zero point of the dB scale is chosen appropriately, ie, with a stimulus luminance of about 4,000 asb used as the 0 dB level, the same differential light sensitivity (DLS) values for normal visual fields can be obtained with the CFPP as with all Octopus models (201, 500, 2000). Within the limits of measurement error, the same decrease of DLS was found with the CFPP as obtained using the other perimeters for test locations (of the G1 program), ranging from the center out to an eccentricity of 30 degrees. Thus it appears that the normal values as used in the other Octopus perimeters can also be utilized in this cupola-free instrument within this range.

  1. Flicker perimetry in healthy subjects: influence of age and gender, learning effect and short-term fluctuation Perimetria "flicker" em indivíduos normais: influência da idade e sexo, efeito aprendizado e flutuação a curto prazo

    Directory of Open Access Journals (Sweden)

    Luciana Bernardi

    2007-02-01

    Full Text Available PURPOSE: To determine the mean critical fusion frequency and the short-term fluctuation, to analyze the influence of age, gender, and the learning effect in healthy subjects undergoing flicker perimetry. METHODS: Study 1 - 95 healthy subjects underwent flicker perimetry once in one eye. Mean critical fusion frequency values were compared between genders, and the influence of age was evaluated using linear regression analysis. Study 2 - 20 healthy subjects underwent flicker perimetry 5 times in one eye. The first 3 sessions were separated by an interval of 1 to 30 days, whereas the last 3 sessions were performed within the same day. The first 3 sessions were used to investigate the presence of a learning effect, whereas the last 3 tests were used to calculate short-term fluctuation. RESULTS: Study 1 - Linear regression analysis demonstrated that mean global, foveal, central, and critical fusion frequency per quadrant significantly decreased with age (p0.05, with the exception of the central area and inferonasal quadrant (p=0.049 and p=0.011, respectively, where the values were lower in females. Study 2 - Mean global (p=0.014, central (p=0.008, and peripheral (p=0.03 critical fusion frequency were significantly lower in the first session compared to the second and third sessions. The mean global short-term fluctuation was 5.06±1.13 Hz, the mean interindividual and intraindividual variabilities were 11.2±2.8% and 6.4±1.5%, respectively. CONCLUSION: This study suggests that, in healthy subjects, critical fusion frequency decreases with age, that flicker perimetry is associated with a learning effect, and that a moderately high short-term fluctuation is expected.OBJETIVOS: Determinar os valores médios da freqüência crítica de fusão e a flutuação a curto prazo, analisar a influência da idade, sexo e o efeito aprendizado na perimetria "flicker". MÉTODOS: Estudo 1 - 96 indivíduos normais foram submetidos à perimetria "flicker" uma vez em

  2. Laser Technology.

    Science.gov (United States)

    Gauger, Robert

    1993-01-01

    Describes lasers and indicates that learning about laser technology and creating laser technology activities are among the teacher enhancement processes needed to strengthen technology education. (JOW)

  3. Does Posterior Capsule Opacification Affect the Results of Diagnostic Technologies to Evaluate the Retina and the Optic Disc?

    Directory of Open Access Journals (Sweden)

    Jose Javier Garcia-Medina

    2015-01-01

    should be set for future comparisons following capsulotomy when using automated perimetry and scanning laser polarimetry. To perform OCT in the presence of PCO, reliable examinations (considering signal strength apparently guarantee that measurements are not influenced by PCO.

  4. Taming Technology

    Science.gov (United States)

    Branscomb, Lewis M.

    1971-01-01

    Reviews aspects of technology in our society: technology as a force for social change; reasons for the frustration and dissatisfaction with technology; how technology decentralizes power; the individual's influence; resolving conflicts in the ionized" society; regulation of technology; corporate responsibility; and the potential pitfalls for the…

  5. Assistive Technology

    Science.gov (United States)

    ... Page Resize Text Printer Friendly Online Chat Assistive Technology Assistive technology (AT) is any service or tool that helps ... be difficult or impossible. For older adults, such technology may be a walker to improve mobility or ...

  6. Sport Technology

    CSIR Research Space (South Africa)

    Kirkbride, T

    2007-11-01

    Full Text Available Technology is transforming the games themselves and at times with dire consequences. Tony Kirkbride, Head: CSIR Technology Centre said there are a variety of sports technologies and there have been advances in material sciences and advances...

  7. Rover Technologies

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop and mature rover technologies supporting robotic exploration including rover design, controlling rovers over time delay and for exploring . Technology...

  8. Nano technology

    International Nuclear Information System (INIS)

    Lee, In Sik

    2002-03-01

    This book is introduction of nano technology, which describes what nano technology is, alpha and omega of nano technology, the future of Korean nano technology and human being's future and nano technology. The contents of this book are nano period is coming, a engine of creation, what is molecular engineering, a huge nano technology, technique on making small things, nano materials with exorbitant possibility, the key of nano world the most desirable nano technology in bio industry, nano development plan of government, the direction of development for nano technology and children of heart.

  9. Information Technology

    Science.gov (United States)

    2003-01-01

    The first wave delivered a range of services to most areas of the world through a vast, carefully constructed global network. Cellular technology ...Information Technology and Services Alliance. Digital Planet 2002: The Global Information Economy. February 2002. Yegyazarian, Anush. Sales Taxes...Information Technology ABSTRACT: The information technology (IT) industry affects virtually every industry in the n economy. During the late 90

  10. Electronic technology

    International Nuclear Information System (INIS)

    Kim, Jin Su

    2010-07-01

    This book is composed of five chapters, which introduces electronic technology about understanding of electronic, electronic component, radio, electronic application, communication technology, semiconductor on its basic, free electron and hole, intrinsic semiconductor and semiconductor element, Diode such as PN junction diode, characteristic of junction diode, rectifier circuit and smoothing circuit, transistor on structure of transistor, characteristic of transistor and common emitter circuit, electronic application about electronic equipment, communication technology and education, robot technology and high electronic technology.

  11. Globalization & technology

    DEFF Research Database (Denmark)

    Narula, Rajneesh

    Technology and globalization are interdependent processes. Globalization has a fundamental influence on the creation and diffusion of technology, which, in turn, affects the interdependence of firms and locations. This volume examines the international aspect of this interdependence at two levels...

  12. Living Technology

    DEFF Research Database (Denmark)

    2010-01-01

    This book is aimed at anyone who is interested in learning more about living technology, whether coming from business, the government, policy centers, academia, or anywhere else. Its purpose is to help people to learn what living technology is, what it might develop into, and how it might impact...... our lives. The phrase 'living technology' was coined to refer to technology that is alive as well as technology that is useful because it shares the fundamental properties of living systems. In particular, the invention of this phrase was called for to describe the trend of our technology becoming...... increasingly life-like or literally alive. Still, the phrase has different interpretations depending on how one views what life is. This book presents nineteen perspectives on living technology. Taken together, the interviews convey the collective wisdom on living technology's power and promise, as well as its...

  13. Earthing Technology

    NARCIS (Netherlands)

    Blok, Vincent

    2017-01-01

    In this article, we reflect on the conditions under which new technologies emerge in the Anthropocene and raise the question of how to conceptualize sustainable technologies therein. To this end, we explore an eco-centric approach to technology development, called biomimicry. We discuss opposing

  14. Technology Tiers

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    A technology tier is a level in a product system: final product, system, subsystem, component, or part. As a concept, it contrasts traditional “vertical” special technologies (for example, mechanics and electronics) and focuses “horizontal” feature technologies such as product characteristics...

  15. Soulful Technologies

    DEFF Research Database (Denmark)

    Fausing, Bent

    2010-01-01

    or anthropomorphism is important for the branding of new technology. Technology is seen as creating a techno-transcendence towards a more qualified humanity which is in contact with fundamental human values like intuition, vision, and sensing; all the qualities that technology, industrialization, and rationalization......, - in short modernity - have taken away from human existence. What old technology has removed now comes back through new technology promoting a better humanity. The present article investigates how digital technology and affects are presented and combined, with examples from everyday imagery, e.g. TV......Samsung introduced in 2008 a mobile phone called "Soul" made with a human touch and including itself a "magic touch". Through the analysis of a Nokia mobile phone TV-commercials I want to examine the function and form of digital technology in everyday images. The mobile phone and its digital camera...

  16. Technology '90

    International Nuclear Information System (INIS)

    1991-01-01

    The US Department of Energy (DOE) laboratories have a long history of excellence in performing research and development in a number of areas, including the basic sciences, applied-energy technology, and weapons-related technology. Although technology transfer has always been an element of DOE and laboratory activities, it has received increasing emphasis in recent years as US industrial competitiveness has eroded and efforts have increased to better utilize the research and development resources the laboratories provide. This document, Technology '90, is the latest in a series that is intended to communicate some of the many opportunities available for US industry and universities to work with the DOE and its laboratories in the vital activity of improving technology transfer to meet national needs. Technology '90 is divided into three sections: Overview, Technologies, and Laboratories. The Overview section describes the activities and accomplishments of the DOE research and development program offices. The Technologies section provides descriptions of new technologies developed at the DOE laboratories. The Laboratories section presents information on the missions, programs, and facilities of each laboratory, along with a name and telephone number of a technology transfer contact for additional information. Separate papers were prepared for appropriate sections of this report

  17. Sensemaking technologies

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    Research scope: The scope of the project is to study technological implementation processes by using Weick's sensemaking concept (Weick, 1995). The purpose of using a social constructivist approach to investigate technological implementation processes is to find out how new technologies transform...... patterns of social action and interaction in organisations (Barley 1986; 1990, Orlikowski 2000). Current research in the field shows that new technologies affect organisational routines/structures/social relationships/power relations/dependencies and alter organisational roles (Barley 1986; 1990, Burkhardt......, Orlikowski 2000). Viewing the use of technology as a process of enactment opens up for investigating the social processes of interpreting new technology into the organisation (Orlikowski 2000). The scope of the PhD project will therefore be to gain a deeper understanding of how the enactment of new...

  18. Technological risks

    International Nuclear Information System (INIS)

    Klinke, A.; Renn, O.

    1998-01-01

    The empirical part about the technological risks deals with different technologies: nuclear energy, early warning systems of nuclear weapons and NBC-weapons, and electromagnetic fields. The potential of damage, the contemporary management strategies and the relevant characteristics will be described for each technology: risks of nuclear energy; risks of early warning systems of nuclear weapons and NBC-weapons; risks of electromagnetic fields. (authors)

  19. Technological risks

    Energy Technology Data Exchange (ETDEWEB)

    Klinke, A.; Renn, O. [Center of Technology Assessment in Baden-Wuerttemberg, Stuttgart (Germany)

    1998-07-01

    The empirical part about the technological risks deals with different technologies: nuclear energy, early warning systems of nuclear weapons and NBC-weapons, and electromagnetic fields. The potential of damage, the contemporary management strategies and the relevant characteristics will be described for each technology: risks of nuclear energy; risks of early warning systems of nuclear weapons and NBC-weapons; risks of electromagnetic fields. (authors)

  20. Technology alliances

    International Nuclear Information System (INIS)

    Torgerson, D.F.; Boczar, P.G.; Kugler, G.

    1991-10-01

    In the field of nuclear technology, Canada and Korea developed a highly successful relationship that could serve as a model for other high-technology industries. This is particularly significant when one considers the complexity and technical depth required to design, build and operate a nuclear reactor. This paper will outline the overall framework for technology transfer and cooperation between Canada and Korea, and will focus on cooperation in nuclear R and D between the two countries

  1. Chemistry Technology

    Data.gov (United States)

    Federal Laboratory Consortium — Chemistry technology experts at NCATS engage in a variety of innovative translational research activities, including:Design of bioactive small molecules.Development...

  2. Technology Catalogue

    International Nuclear Information System (INIS)

    1994-02-01

    The Department of Energy's Office of Environmental Restoration and Waste Management (EM) is responsible for remediating its contaminated sites and managing its waste inventory in a safe and efficient manner. EM's Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste management programs within EM's Office of Environmental Restoration and Office of Waste Management. The purpose of the Technology Catalogue is to provide performance data on OTD-developed technologies to scientists and engineers assessing and recommending technical solutions within the Department's clean-up and waste management programs, as well as to industry, other federal and state agencies, and the academic community. OTD's applied research and demonstration activities are conducted in programs referred to as Integrated Demonstrations (IDs) and Integrated Programs (IPs). The IDs test and evaluate.systems, consisting of coupled technologies, at specific sites to address generic problems, such as the sensing, treatment, and disposal of buried waste containers. The IPs support applied research activities in specific applications areas, such as in situ remediation, efficient separations processes, and site characterization. The Technology Catalogue is a means for communicating the status. of the development of these innovative technologies. The FY93 Technology Catalogue features technologies successfully demonstrated in the field through IDs and sufficiently mature to be used in the near-term. Technologies from the following IDs are featured in the FY93 Technology Catalogue: Buried Waste ID (Idaho National Engineering Laboratory, Idaho); Mixed Waste Landfill ID (Sandia National Laboratories, New Mexico); Underground Storage Tank ID (Hanford, Washington); Volatile organic compound (VOC) Arid ID (Richland, Washington); and VOC Non-Arid ID (Savannah River Site, South Carolina)

  3. Thermally activated technologies: Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2003-05-01

    The purpose of this Technology Roadmap is to outline a set of actions for government and industry to develop thermally activated technologies for converting America’s wasted heat resources into a reservoir of pollution-free energy for electric power, heating, cooling, refrigeration, and humidity control. Fuel flexibility is important. The actions also cover thermally activated technologies that use fossil fuels, biomass, and ultimately hydrogen, along with waste heat.

  4. Technological Advancements

    Science.gov (United States)

    Kennedy, Mike

    2010-01-01

    The influx of technology has brought significant improvements to school facilities. Many of those advancements can be found in classrooms, but when students head down the hall to use the washrooms, they are likely to find a host of technological innovations that have improved conditions in that part of the building. This article describes modern…

  5. Maritime Technology

    DEFF Research Database (Denmark)

    Sørensen, Herman

    1997-01-01

    Elementary introduction to the subject "Maritime Technology".The contents include drawings, sketches and references in English without any supplementary text.......Elementary introduction to the subject "Maritime Technology".The contents include drawings, sketches and references in English without any supplementary text....

  6. Technology collaboration

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Jacob [Halliburton (Brazil)

    2011-07-01

    The aim of this paper is to present Halliburton's Brazilian technology center. Halliburton has technology centers in the United States, Saudi Arabia, India, Singapore and Brazil, all of which aim at delivering accelerated innovation in the oil sector. The technology centers engage in research and development activities with the help of various universities and in collaboration with the customer or supplier. The Halliburton Brazil technology center provides its customers with timely research and development solutions for enhancing recovery and mitigating reservoir uncertainty; they are specialized in finding solutions for pre- and post-salt carbonate drilling and in the enhancement of production from mature fields. This presentation showcased the work carried out by the Halliburton Brazil technology center to help customers develop their deepwater field activities.

  7. Sensemaking technology

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    Research objective: The object of the LOK research project is to gain a better understanding of the technological strategic processes in organisations by using the concept/metaphor of sensemaking. The project will investigate the technological strategies in organisations in order to gain a deeper...... understanding of the cognitive competencies and barriers towards implementing new technology in organisations. The research will therefore concentrate on researching the development process in the organisation's perception of the external environmental elements of customers, suppliers, competitors, internal...... and external technology and legislation and the internal environmental elements of structure, power relations and political arenas. All of these variables have influence on which/how technologies are implemented thus creating different outcomes all depending on the social dynamics that are triggered by changes...

  8. WAJM 28(3) for printing.pmd

    African Journals Online (AJOL)

    dese

    Contour Tonometer; EGE, Early Glaucoma Eyes; FACT, Functional Activity Contrast Test; FDT, Frequency Doubling Technology; GAT, Goldmann Applanation. Tonometry; GSE, Glaucoma-Suspect Eye; HPRP, High-Pass Resolution Perimetry; IOP, Intracular Pressure; MAP, Motion Automated Perimetry; NCT, Non-. Contact ...

  9. Ergonomics technology

    Science.gov (United States)

    Jones, W. L.

    1977-01-01

    Major areas of research and development in ergonomics technology for space environments are discussed. Attention is given to possible applications of the technology developed by NASA in industrial settings. A group of mass spectrometers for gas analysis capable of fully automatic operation has been developed for atmosphere control on spacecraft; a version for industrial use has been constructed. Advances have been made in personal cooling technology, remote monitoring of medical information, and aerosol particle control. Experience gained by NASA during the design and development of portable life support units has recently been applied to improve breathing equipment used by fire fighters.

  10. Technology Innovation

    Science.gov (United States)

    EPA produces innovative technologies and facilitates their creation in line with the Agency mission to create products such as the stormwater calculator, remote sensing, innovation clusters, and low-cost air sensors.

  11. Videodisc technology

    Energy Technology Data Exchange (ETDEWEB)

    Marsh, F.E. Jr.

    1981-03-01

    An overview of the technology of videodiscs is given. The emphasis is on systems that use reflection or transmission of laser light. Possible use of videodiscs for storage of bibliographic information is considered. 6 figures, 3 tables. (RWR)

  12. Technology | FNLCR

    Science.gov (United States)

    The Frederick National Laboratory develops and applies advanced, next-generation technologies to solve basic and applied problems in the biomedical sciences, and serves as a national resource of shared high-tech facilities.

  13. Globalization & technology

    DEFF Research Database (Denmark)

    Narula, Rajneesh

    of innovation" understanding of learning. Narula and Smith reconcile an important paradox. On the one hand, locations and firms are increasingly interdependent through supranational organisations, regional integration, strategic alliances, and the flow of investments, technologies, ideas and people......Technology and globalization are interdependent processes. Globalization has a fundamental influence on the creation and diffusion of technology, which, in turn, affects the interdependence of firms and locations. This volume examines the international aspect of this interdependence at two levels....... The boundaries of firms and countries are increasingly porous and imprecise, because firms use alliances and outsourcing, and countries are rarely technologically self-sufficient. On the other hand, locations remain distinct and idiosyncratic, with innovation systems remaining largely nationally bound. Knowledge...

  14. Plasma technology

    International Nuclear Information System (INIS)

    Drouet, M.G.

    1984-03-01

    IREQ was contracted by the Canadian Electrical Association to review plasma technology and assess the potential for application of this technology in Canada. A team of experts in the various aspects of this technology was assembled and each team member was asked to contribute to this report on the applications of plasma pertinent to his or her particular field of expertise. The following areas were examined in detail: iron, steel and strategic-metals production; surface treatment by spraying; welding and cutting; chemical processing; drying; and low-temperature treatment. A large market for the penetration of electricity has been identified. To build up confidence in the technology, support should be provided for selected R and D projects, plasma torch demonstrations at full power, and large-scale plasma process testing

  15. Exploration technology

    Energy Technology Data Exchange (ETDEWEB)

    Roennevik, H.C. [Saga Petroleum A/S, Forus (Norway)

    1996-12-31

    The paper evaluates exploration technology. Topics discussed are: Visions; the subsurface challenge; the creative tension; the exploration process; seismic; geology; organic geochemistry; seismic resolution; integration; drilling; value creation. 4 refs., 22 figs.

  16. Lasers technology

    International Nuclear Information System (INIS)

    2014-01-01

    The Laser Technology Program of IPEN is developed by the Center for Lasers and Applications (CLA) and is committed to the development of new lasers based on the research of new optical materials and new resonator technologies. Laser applications and research occur within several areas such as Nuclear, Medicine, Dentistry, Industry, Environment and Advanced Research. Additional goals of the Program are human resource development and innovation, in association with Brazilian Universities and commercial partners

  17. Cognitive technologies

    CERN Document Server

    Mello, Alan; Figueiredo, Fabrício; Figueiredo, Rafael

    2017-01-01

    This book focuses on the next generation optical networks as well as mobile communication technologies. The reader will find chapters on Cognitive Optical Network, 5G Cognitive Wireless, LTE, Data Analysis and Natural Language Processing. It also presents a comprehensive view of the enhancements and requirements foreseen for Machine Type Communication. Moreover, some data analysis techniques and Brazilian Portuguese natural language processing technologies are also described here. .

  18. Technology cycles and technology revolutions

    Energy Technology Data Exchange (ETDEWEB)

    Paganetto, Luigi; Scandizzo, Pasquale Lucio

    2010-09-15

    Technological cycles have been characterized as the basis of long and continuous periods economic growth through sustained changes in total factor productivity. While this hypothesis is in part consistent with several theories of growth, the sheer magnitude and length of the economic revolutions experienced by humankind seems to indicate surmise that more attention should be given to the origin of major technological and economic changes, with reference to one crucial question: role of production and use of energy in economic development.

  19. Persuasive Technology

    DEFF Research Database (Denmark)

    This book constitutes the proceedings of the 5th International Conference on Persuasive Technology, PERSUASIVE 2010, held in Copenhagen Denmark in June 2010. The 25 papers presented were carefully reviewed and selected from 80 submissions. In addition three keynote papers are included in this vol......This book constitutes the proceedings of the 5th International Conference on Persuasive Technology, PERSUASIVE 2010, held in Copenhagen Denmark in June 2010. The 25 papers presented were carefully reviewed and selected from 80 submissions. In addition three keynote papers are included...... in this volume. The topics covered are emotions and user experience, ambient persuasive systems, persuasive design, persuasion profiles, designing for health, psychology of persuasion, embodied and conversational agents, economic incentives, and future directions for persuasive technology....

  20. Seafood Technology

    DEFF Research Database (Denmark)

    Børresen, Torger

    This presentation will fill the total picture of this conference between fisheries and aquaculture, blue biotech and bioconservation, by considering the optimal processing technology of marine resources from the raw material until the seafood reaches the plate of the consumer. The situation today...... must be performed such that total traceability and authenticity of the final products can be presented on demand. The most important aspects to be considered within seafood technology today are safety, healthy products and high eating quality. Safety can be divided into microbiological safety...... and not presenting any safety risk per se. Seafood is healthy due to the omega-3 fatty acids and the nutritional value of vitamins, peptides and proteins. The processing technology must however be performed such that these valuable features are not lost during production. The same applies to the eating quality. Any...

  1. Smart technology

    International Nuclear Information System (INIS)

    Bruckner, D.G.

    1991-01-01

    The success of smart technology in the pursuit of the Gulf War has accentuated the awareness of how the Safeguards and Security disciplines are changing in response to new weaponry. Throughout the Department of Energy Integrated Complex (IC) Safeguards and Security efforts such as: Protection Programs Operations; Materials, Controls and Accountability; Information Security; Computer Security; Operational Security; Personnel Security, Safeguards and/or Security (S and S) surveys, and Inspections and Evaluations are undergoing a reassessment and refocusing. Some of this is in response to such things as the DOE initiated Freeze Report and the Drell Report. An important aspect is also technological, adjusting the way business is done in light of the weapons, tools and processes/procedures becoming available. This paper addresses the S and S issues with the promise of using smart technology to develop new approaches and equipment across the IC

  2. Technology Transfer

    Science.gov (United States)

    Smith, Nanette R.

    1995-01-01

    The objective of this summer's work was to attempt to enhance Technology Application Group (TAG) ability to measure the outcomes of its efforts to transfer NASA technology. By reviewing existing literature, by explaining the economic principles involved in evaluating the economic impact of technology transfer, and by investigating the LaRC processes our William & Mary team has been able to lead this important discussion. In reviewing the existing literature, we identified many of the metrics that are currently being used in the area of technology transfer. Learning about the LaRC technology transfer processes and the metrics currently used to track the transfer process enabled us to compare other R&D facilities to LaRC. We discuss and diagram impacts of technology transfer in the short run and the long run. Significantly, it serves as the basis for analysis and provides guidance in thinking about what the measurement objectives ought to be. By focusing on the SBIR Program, valuable information regarding the strengths and weaknesses of this LaRC program are to be gained. A survey was developed to ask probing questions regarding SBIR contractors' experience with the program. Specifically we are interested in finding out whether the SBIR Program is accomplishing its mission, if the SBIR companies are providing the needed innovations specified by NASA and to what extent those innovations have led to commercial success. We also developed a survey to ask COTR's, who are NASA employees acting as technical advisors to the SBIR contractors, the same type of questions, evaluating the successes and problems with the SBIR Program as they see it. This survey was developed to be implemented interactively on computer. It is our hope that the statistical and econometric studies that can be done on the data collected from all of these sources will provide insight regarding the direction to take in developing systematic evaluations of programs like the SBIR Program so that they can

  3. Technology applications

    Science.gov (United States)

    Anuskiewicz, T.; Johnston, J.; Leavitt, W.; Zimmerman, R. R.

    1972-01-01

    A summary of NASA Technology Utilization programs for the period of 1 December 1971 through 31 May 1972 is presented. An abbreviated description of the overall Technology Utilization Applications Program is provided as a background for the specific applications examples. Subjects discussed are in the broad headings of: (1) cancer, (2) cardiovascular disease, (2) medical instrumentation, (4) urinary system disorders, (5) rehabilitation medicine, (6) air and water pollution, (7) housing and urban construction, (8) fire safety, (9) law enforcement and criminalistics, (10) transportation, and (11) mine safety.

  4. Architectural technology

    DEFF Research Database (Denmark)

    2005-01-01

    The booklet offers an overall introduction to the Institute of Architectural Technology and its projects and activities, and an invitation to the reader to contact the institute or the individual researcher for further information. The research, which takes place at the Institute of Architectural...... Technology at the Roayl Danish Academy of Fine Arts, School of Architecture, reflects a spread between strategic, goal-oriented pilot projects, commissioned by a ministry, a fund or a private company, and on the other hand projects which originate from strong personal interests and enthusiasm of individual...

  5. Technology Transfer: Marketing Tomorrow's Technology

    Science.gov (United States)

    Tcheng, Erene

    1995-01-01

    The globalization of the economy and the end of the Cold War have triggered many changes in the traditional practices of U.S. industry. To effectively apply the resources available to the United States, the federal government has firmly advocated a policy of technology transfer between private industry and government labs, in this case the National Aeronautics and Space Administration (NASA). NASA Administrator Daniel Goldin is a strong proponent of this policy and has organized technology transfer or commercialization programs at each of the NASA field centers. Here at Langley Research Center, the Technology Applications Group (TAG) is responsible for facilitating the transfer of Langley developed research and technology to U.S. industry. Entering the program, I had many objectives for my summer research with TAG. Certainly, I wanted to gain a more thorough understanding of the concept of technology transfer and Langley's implementation of a system to promote it to both the Langley community and the community at large. Also, I hoped to become more familiar with Langley's research capabilities and technology inventory available to the public. More specifically, I wanted to learn about the technology transfer process at Langley. Because my mentor is a member of Materials and Manufacturing marketing sector of the Technology Transfer Team, another overriding objective for my research was to take advantage of his work and experience in materials research to learn about the Advanced Materials Research agency wide and help market these developments to private industry. Through the various projects I have been assigned to work on in TAG, I have successfully satisfied the majority of these objectives. Work on the Problem Statement Process for TAG as well as the development of the Advanced Materials Research Brochure have provided me with the opportunity to learn about the technology transfer process from the outside looking in and the inside looking out. Because TAG covers

  6. Blast Technologies

    Science.gov (United States)

    2011-06-27

    Team Leader Risa Scherer Blast Mitigation Interior and Laboratory Team Leader Blast Technologies POC’s Government Point Of Contacts (POCs): To...to yield injury assessments at higher fidelities and with higher confidence UNCLASSIFIED UNCLASSIFIED Risa Scherer Blast Mitigation Interior and

  7. Health technology

    International Nuclear Information System (INIS)

    Nicolas, Delphine; Dangleant, Caroline; Ganier, Aude; Kaczmarek, Delphine

    2008-01-01

    The CEA is an organization with a primarily technological focus, and one of the key areas in which it carries out research is Health Technology. This field of research was recognized and approved by the French Atomic Energy Committee on July 20, 2004. The expectations of both the public and health care professionals relate to demands for the highest standards of health care, at minimum risk. This implies a need to diagnose illness and disease as accurately and as at early a stage as possible, to target surgery precisely to deal only with damaged organs or tissues, to minimize the risk of side effects, allergies and hospital-acquired infections, to follow-up and, as far as possible, tailor the health delivery system to each individual's needs and his or her lifestyle. The health care sector is subject to rapid changes and embraces a vast range of scientific fields. It now requires technological developments that will serve to gather increasing quantities of useful information, analyze and integrate it to obtain a full understanding of highly complex processes and to be able to treat the human body as un-invasively as possible. All the technologies developed require assessment, especially in the hospital environment. (authors)

  8. Technology transfer

    International Nuclear Information System (INIS)

    Boury, C.

    1986-01-01

    This paper emphasizes in the specific areas of design, engineering and component production. This paper presents what Framatome has to offer in these areas and its export oriented philosophy. Then, a typical example of this technology transfer philosophy is the collaboration with the South Korean firm, Korea Heavy Industries Corporation (KHIC) for the supply of KNU 9 and KNU 10 power stations

  9. Technology Transfer

    Science.gov (United States)

    Bullock, Kimberly R.

    1995-01-01

    The development and application of new technologies in the United States has always been important to the economic well being of the country. The National Aeronautics and Space Administration (NASA) has been an important source of these new technologies for almost four decades. Recently, increasing global competition has emphasized the importance of fully utilizing federally funded technologies. Today NASA must meet its mission goals while at the same time, conduct research and development that contributes to securing US economic growth. NASA technologies must be quickly and effectively transferred into commercial products. In order to accomplish this task, NASA has formulated a new way of doing business with the private sector. Emphasis is placed on forming mutually beneficial partnerships between NASA and US industry. New standards have been set in response to the process that increase effectiveness, efficiency, and timely customer response. This summer I have identified potential markets for two NASA inventions: including the Radially Focused Eddy Current Sensor for Characterization of Flaws in Metallic Tubing and the Radiographic Moire. I have also worked to establish a cooperative program with TAG, private industry, and a university known as the TAG/Industry/Academia Program.

  10. Energy Technology.

    Science.gov (United States)

    Eaton, William W.

    Reviewed are technological problems faced in energy production including locating, recovering, developing, storing, and distributing energy in clean, convenient, economical, and environmentally satisfactory manners. The energy resources of coal, oil, natural gas, hydroelectric power, nuclear energy, solar energy, geothermal energy, winds, tides,…

  11. (Environmental technology)

    Energy Technology Data Exchange (ETDEWEB)

    Boston, H.L.

    1990-10-12

    The traveler participated in a conference on environmental technology in Paris, sponsored by the US Embassy-Paris, US Environmental Protection Agency (EPA), the French Environmental Ministry, and others. The traveler sat on a panel for environmental aspects of energy technology and made a presentation on the potential contributions of Oak Ridge National Laboratory (ORNL) to a planned French-American Environmental Technologies Institute in Chattanooga, Tennessee, and Evry, France. This institute would provide opportunities for international cooperation on environmental issues and technology transfer related to environmental protection, monitoring, and restoration at US Department of Energy (DOE) facilities. The traveler also attended the Fourth International Conference on Environmental Contamination in Barcelona. Conference topics included environmental chemistry, land disposal of wastes, treatment of toxic wastes, micropollutants, trace organics, artificial radionuclides in the environment, and the use biomonitoring and biosystems for environmental assessment. The traveler presented a paper on The Fate of Radionuclides in Sewage Sludge Applied to Land.'' Those findings corresponded well with results from studies addressing the fate of fallout radionuclides from the Chernobyl nuclear accident. There was an exchange of new information on a number of topics of interest to DOE waste management and environmental restoration needs.

  12. Geospatial Technology

    Science.gov (United States)

    Reed, Philip A.; Ritz, John

    2004-01-01

    Geospatial technology refers to a system that is used to acquire, store, analyze, and output data in two or three dimensions. This data is referenced to the earth by some type of coordinate system, such as a map projection. Geospatial systems include thematic mapping, the Global Positioning System (GPS), remote sensing (RS), telemetry, and…

  13. Photovoltaic technologies

    International Nuclear Information System (INIS)

    Bagnall, Darren M.; Boreland, Matt

    2008-01-01

    Photovoltaics is already a billion dollar industry. It is experiencing rapid growth as concerns over fuel supplies and carbon emissions mean that governments and individuals are increasingly prepared to ignore its current high costs. It will become truly mainstream when its costs are comparable to other energy sources. At the moment, it is around four times too expensive for competitive commercial production. Three generations of photovoltaics have been envisaged that will take solar power into the mainstream. Currently, photovoltaic production is 90% first-generation and is based on silicon wafers. These devices are reliable and durable, but half of the cost is the silicon wafer and efficiencies are limited to around 20%. A second generation of solar cells would use cheap semiconductor thin films deposited on low-cost substrates to produce devices of slightly lower efficiency. A number of thin-film device technologies account for around 5-6% of the current market. As second-generation technology reduces the cost of active material, the substrate will eventually be the cost limit and higher efficiency will be needed to maintain the cost-reduction trend. Third-generation devices will use new technologies to produce high-efficiency devices. Advances in nanotechnology, photonics, optical metamaterials, plasmonics and semiconducting polymer sciences offer the prospect of cost-competitive photovoltaics. It is reasonable to expect that cost reductions, a move to second-generation technologies and the implementation of new technologies and third-generation concepts can lead to fully cost-competitive solar energy in 10-15 years. (author)

  14. Technology Programme

    International Nuclear Information System (INIS)

    Batistoni, Paola; De Marco, Francesco; Pieroni, Leonardo

    2005-01-01

    The technology activities carried out by the Euratom-ENEA Association in the framework of the European Fusion Development Agreement concern the Next Step (International Thermonuclear Experimental Reactor - ITER), the Long-Term Programme (breeder blanket, materials, International Fusion Materials Irradiation Facility - IFMIF), Power Plant Conceptual Studies and Socio-Economic Studies. The Underlying Technology Programme was set up to complement the fusion activities as well to develop technologies with a wider range of interest. The Technology Programme mainly involves staff from the Frascati laboratories of the Fusion Technical and Scientific Unit and from the Brasimone laboratories of the Advanced Physics Technologies Unit. Other ENEA units also provide valuable contributions to the programme. ENEA is heavily engaged in component development/testing and in design and safety activities for the European Fusion Technology Programme. Although the work documented in the following covers a large range of topics that differ considerably because they concern the development of extremely complex systems, the high level of integration and coordination ensures the capability to cover the fusion system as a whole. In 2004 the most significant testing activities concerned the ITER primary beryllium-coated first wall. In the field of high-heat-flux components, an important achievement was the qualification of the process for depositing a copper liner on carbon fibre composite (CFC) hollow tiles. This new process, pre-brazed casting (PBC), allows the hot radial pressing (HRP) joining procedure to be used also for CFC-based armour monoblock divertor components. The PBC and HRP processes are candidates for the construction of the ITER divertor. In the materials field an important milestone was the commissioning of a new facility for chemical vapour infiltration/deposition, used for optimising silicon carbide composite (SiCf/SiC) components. Eight patents were deposited during 2004

  15. Technology Programme

    Energy Technology Data Exchange (ETDEWEB)

    Batistoni, Paola; De Marco, Francesco; Pieroni, Leonardo (ed.)

    2005-07-01

    The technology activities carried out by the Euratom-ENEA Association in the framework of the European Fusion Development Agreement concern the Next Step (International Thermonuclear Experimental Reactor - ITER), the Long-Term Programme (breeder blanket, materials, International Fusion Materials Irradiation Facility - IFMIF), Power Plant Conceptual Studies and Socio-Economic Studies. The Underlying Technology Programme was set up to complement the fusion activities as well to develop technologies with a wider range of interest. The Technology Programme mainly involves staff from the Frascati laboratories of the Fusion Technical and Scientific Unit and from the Brasimone laboratories of the Advanced Physics Technologies Unit. Other ENEA units also provide valuable contributions to the programme. ENEA is heavily engaged in component development/testing and in design and safety activities for the European Fusion Technology Programme. Although the work documented in the following covers a large range of topics that differ considerably because they concern the development of extremely complex systems, the high level of integration and coordination ensures the capability to cover the fusion system as a whole. In 2004 the most significant testing activities concerned the ITER primary beryllium-coated first wall. In the field of high-heat-flux components, an important achievement was the qualification of the process for depositing a copper liner on carbon fibre composite (CFC) hollow tiles. This new process, pre-brazed casting (PBC), allows the hot radial pressing (HRP) joining procedure to be used also for CFC-based armour monoblock divertor components. The PBC and HRP processes are candidates for the construction of the ITER divertor. In the materials field an important milestone was the commissioning of a new facility for chemical vapour infiltration/deposition, used for optimising silicon carbide composite (SiCf/SiC) components. Eight patents were deposited during 2004

  16. Technological Networks

    Science.gov (United States)

    Mitra, Bivas

    The study of networks in the form of mathematical graph theory is one of the fundamental pillars of discrete mathematics. However, recent years have witnessed a substantial new movement in network research. The focus of the research is shifting away from the analysis of small graphs and the properties of individual vertices or edges to consideration of statistical properties of large scale networks. This new approach has been driven largely by the availability of technological networks like the Internet [12], World Wide Web network [2], etc. that allow us to gather and analyze data on a scale far larger than previously possible. At the same time, technological networks have evolved as a socio-technological system, as the concepts of social systems that are based on self-organization theory have become unified in technological networks [13]. In today’s society, we have a simple and universal access to great amounts of information and services. These information services are based upon the infrastructure of the Internet and the World Wide Web. The Internet is the system composed of ‘computers’ connected by cables or some other form of physical connections. Over this physical network, it is possible to exchange e-mails, transfer files, etc. On the other hand, the World Wide Web (commonly shortened to the Web) is a system of interlinked hypertext documents accessed via the Internet where nodes represent web pages and links represent hyperlinks between the pages. Peer-to-peer (P2P) networks [26] also have recently become a popular medium through which huge amounts of data can be shared. P2P file sharing systems, where files are searched and downloaded among peers without the help of central servers, have emerged as a major component of Internet traffic. An important advantage in P2P networks is that all clients provide resources, including bandwidth, storage space, and computing power. In this chapter, we discuss these technological networks in detail. The review

  17. Innovative Technology in Automotive Technology

    Science.gov (United States)

    Gardner, John

    2007-01-01

    Automotive Technology combines hands-on training along with a fully integrated, interactive, computerized multistationed facility. Our program is a competency based, true open-entry/open-exit program that utilizes flexible self-paced course outlines. It is designed around an industry partnership that promotes community and economic development,…

  18. Playful Technology

    DEFF Research Database (Denmark)

    Johansen, Stine Liv; Eriksson, Eva

    2013-01-01

    In this paper, the design of future services for children in Danish public libraries is discussed, in the light of new challenges and opportunities in relation to new media and technologies. The Danish government has over the last few years initiated and described a range of initiatives regarding...... the future of public libraries, especially in relation to children as a particular user group. This paper explores play culture, and takes a stance especially in the project ‘Families at play in the library’, but also in experiences from related projects. The focus is on families playing together...... in the library, the changing role of the librarians and the library space. We argue that intertwining traditional library services with new media forms and engaging play is the core challenge for future design in physical public libraries, but also that it is through new media and technology that new...

  19. Technology transfer

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Illustrated by the example of the FRG's nuclear energy exports, it is shown that the nuclear technology transfer leads to new dimensions of intergovernmental relations, which hold within themselves on account of multiple state-to-state, scientific, industrial and - last but not least - personal contacts the chance of far-reaching friendships between countries and people. If the chance is taken, this can also be seen as an important contribution towards maintaining the peace. (orig.) [de

  20. Group technology

    International Nuclear Information System (INIS)

    Rome, C.P.

    1976-01-01

    Group Technology has been conceptually applied to the manufacture of batch-lots of 554 machined electromechanical parts which now require 79 different types of metal-removal tools. The products have been grouped into 7 distinct families which require from 8 to 22 machines in each machine-cell. Throughput time can be significantly reduced and savings can be realized from tooling, direct-labor, and indirect-labor costs

  1. Army Technology

    Science.gov (United States)

    2015-02-01

    MUTT ) is a semi-autonomous robotic follower that lightens the load for Soldiers by decreasing the amount of equipment they need to carry when...dismounted in the toughest of terrains. The MUTT uses advanced, proven commercial technology that has been adapted for the rigors of the battlefield...With ultra-quiet electric motors, the MUTT gives Soldiers unmatched internal transportability options and expeditionary power that includes hands- free

  2. ADSL Technology

    Directory of Open Access Journals (Sweden)

    Slavko Šarić

    2002-11-01

    Full Text Available The paper deals with the ADSL (Asymmetric Digital SubscriberLine technology- the asymmetric digital telecommunicationtechnology. It is characterised by high-speed transmissionof data and simultaneous transmission of information regardingthe throughput capacity of the telephone network. Thisresults in better efficiency of transmission, and higher utilisationof the bandwidth. Due to its advantages, the use of ADSLtechnology is increasing daily, especially by ente1prises in Europeand worldwide.

  3. Nuclear technology

    International Nuclear Information System (INIS)

    1983-03-01

    This report examines nuclear technology in Canada, with emphasis on Quebec, as a means of revitilizing industry. The historical, present day, and future states of Atomic Energy of Canada Limited are examined. Future research programs are discussed in greatest detail. These range from disposal of porcine wastes to new applications for electricity to nuclear medical techniques (to cite only a few examples). The executive summary is written in English. (23 fig., 16 tab.)

  4. Emerging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Shin-yee

    1993-03-01

    The mission of the Emerging Technologies thrust area at Lawrence Livermore National Laboratory is to help individuals establish technology areas that have national and commercial impact, and are outside the scope of the existing thrust areas. We continue to encourage innovative ideas that bring quality results to existing programs. We also take as our mission the encouragement of investment in new technology areas that are important to the economic competitiveness of this nation. In fiscal year 1992, we have focused on nine projects, summarized in this report: (1) Tire, Accident, Handling, and Roadway Safety; (2) EXTRANSYT: An Expert System for Advanced Traffic Management; (3) Odin: A High-Power, Underwater, Acoustic Transmitter for Surveillance Applications; (4) Passive Seismic Reservoir Monitoring: Signal Processing Innovations; (5) Paste Extrudable Explosive Aft Charge for Multi-Stage Munitions; (6) A Continuum Model for Reinforced Concrete at High Pressures and Strain Rates: Interim Report; (7) Benchmarking of the Criticality Evaluation Code COG; (8) Fast Algorithm for Large-Scale Consensus DNA Sequence Assembly; and (9) Using Electrical Heating to Enhance the Extraction of Volatile Organic Compounds from Soil.

  5. Technology Management

    DEFF Research Database (Denmark)

    Pilkington, Alan

    2014-01-01

    This paper reports a bibliometric analysis (co-citation network analysis) of 10 journals in the management of technology (MOT) field. As well as introducing various bibliometric ideas, network analysis tools identify and explore the concepts covered by the field and their inter-relationships. Spe......This paper reports a bibliometric analysis (co-citation network analysis) of 10 journals in the management of technology (MOT) field. As well as introducing various bibliometric ideas, network analysis tools identify and explore the concepts covered by the field and their inter......-relationships. Specific results from different levels of analysis show the different dimensions of technology management: • Co-word terms identify themes • Journal co-citation network: linking to other disciplines • Co-citation network show concentrations of themes The analysis shows that MOT has a bridging role...... in integrating ideas from several distinct disciplines. This suggests that management and strategy are central to MOT which essentially relates to the firm rather than policy. Similarly we have a dual focus on capabilities, but can see subtle differences in how we view these ideas, either through an inwards...

  6. Wearable Technology

    Science.gov (United States)

    Watson, Amanda

    2013-01-01

    Wearable technology projects, to be useful, in the future, must be seamlessly integrated with the Flight Deck of the Future (F.F). The lab contains mockups of space vehicle cockpits, habitat living quarters, and workstations equipped with novel user interfaces. The Flight Deck of the Future is one element of the Integrated Power, Avionics, and Software (IPAS) facility, which, to a large extent, manages the F.F network and data systems. To date, integration with the Flight Deck of the Future has been limited by a lack of tools and understanding of the Flight Deck of the Future data handling systems. To remedy this problem it will be necessary to learn how data is managed in the Flight Deck of the Future and to develop tools or interfaces that enable easy integration of WEAR Lab and EV3 products into the Flight Deck of the Future mockups. This capability is critical to future prototype integration, evaluation, and demonstration. This will provide the ability for WEAR Lab products, EV3 human interface prototypes, and technologies from other JSC organizations to be evaluated and tested while in the Flight Deck of the Future. All WEAR Lab products must be integrated with the interface that will connect them to the Flight Deck of the Future. The WEAR Lab products will primarily be programmed in Arduino. Arduino will be used for the development of wearable controls and a tactile communication garment. Arduino will also be used in creating wearable methane detection and warning system.

  7. Understanding Technology?

    Directory of Open Access Journals (Sweden)

    Erik Bendtsen

    2016-11-01

    Full Text Available We are facing radical changes in our ways of living in the nearest future. Not necessarily of our own choice, but because tchnological development is moving so fast, that it will have still greater impact on many aspects of our lives. We have seen the beginnings of that change within the latest 35 years or so, but according to newest research that change will speed up immensely in the nearest years to come. The impact of that change or these changes will affect our working life immensely as a consequence of automation. How these changes are brought about and which are their consequences in a broad sense is being attempted to be understood and guessed by researchers. No one knows for sure, but specific patterns are visible. This paper will not try to guess, what will come, but will rather try to understand the deepest ”nature” of technology in order to understand the driving factors in this development: the genesis of technology in a broad sense in order to contibute to the understanding of the basis for the expected development.

  8. Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Research results of hard photon technology have been summarized as a part of novel technology development highly utilizing the quantum nature of photon. Hard photon technology refers to photon beam technologies which use photon in the 0.1 to 200 nm wavelength region. Hard photon has not been used in industry due to the lack of suitable photon sources and optical devices. However, hard photon in this wavelength region is expected to bring about innovations in such areas as ultrafine processing and material synthesis due to its atom selective reaction, inner shell excitation reaction, and spatially high resolution. Then, technological themes and possibility have been surveyed. Although there are principle proposes and their verification of individual technologies for the technologies of hard photon generation, regulation and utilization, they are still far from the practical applications. For the photon source technology, the laser diode pumped driver laser technology, laser plasma photon source technology, synchrotron radiation photon source technology, and vacuum ultraviolet photon source technology are presented. For the optical device technology, the multi-layer film technology for beam mirrors and the non-spherical lens processing technology are introduced. Also are described the reduction lithography technology, hard photon excitation process, and methods of analysis and measurement. 430 refs., 165 figs., 23 tabs.

  9. Architectural Technology and Technological Planning

    Directory of Open Access Journals (Sweden)

    Giorgio Giallocosta

    2011-11-01

    Full Text Available At least three fundamental aspects of the many singular technological approaches to architectural planning are currently evolving significantly and are ripe for potential development. The first relates to enhanced opportunities for defining the ex-ante characteristics and performance of building products and components, but particularly concerns potential leadership assumptions in planning and the ‘reification’ of architecture through ‘collective’ behaviours. The second relates to the tendency to try and overcome the connotation of architectural projects, inclusive of their entire life cycle. The third relates to current evolutionary developments (either potential or simply implicit in performance approach.

  10. Technology round and management of technology

    International Nuclear Information System (INIS)

    Park, Yong Tae

    1994-04-01

    This book deals with beginning of technology round with background of it, change of scientific technique paradigm with economy, management and policy, change of international political environment globalization of technical and economic environment, formation of strategic alliance, intensifying regionalism, new GATT system, UR and technology round, new international technique regulation and technology round of OECD, feature and meaning of technology round, assignment and scientific technique of Korea, past and present of scientific technology in Korea, correspondence for technology round.

  11. Incineration technologies

    CERN Document Server

    Buekens, Alfons

    2013-01-01

    Waste incineration is the art of completely combusting waste, while maintaining or reducing emission levels below current emission standards. Where possible, objectives include the recovering of energy as well as the  combustion residues.  Successful waste incineration makes it possible to achieve a deep reduction in waste volume, obtain a compact and sterile residue, and eliminate a wide array of pollutants. This book places waste incineration within the wider context of waste management, and demonstrates that, in contrast to landfills and composting, waste incineration can eliminate objectionable and hazardous properties such as flammability and toxicity, result in a significant reduction in volume, and destroy gaseous and liquid waste streams leaving little or no residues beyond those linked to flue gas neutralization and treatment. Moreover, waste incineration sterilizes and destroys putrescible matter, and produces usable heat.  Incineration Technologies first appeared as a peer-reviewed contribution ...

  12. Robot technology

    International Nuclear Information System (INIS)

    Vertut, Jean; Coiffet, Philippe.

    1985-01-01

    Teleoperation is concerned with the exploration and exploitation of of spaces which do not allow, because of their inaccessibility or hostility, direct access to man. This volume (Parts 2, 3 and 4) covers the contribution of computer science and automatic control to this technology. Part 2 includes a description of teleoperation systems followed by chapters on the operator substitution function by computer feedback to the operator. Part 3 has chapters on performance evaluation of teleoperation systems and the human operator in the teleoperation system. Part 4 is about applications of teleoperation in the nuclear industry, underwater, in space, in medicine, in industry and in security and civil protection. The nuclear applications include research and pilot facilities, reactor operation and maintenance, reactor decommissioning and dismantling and in emergencies, for example following a reactor accident. (U.K.)

  13. Lander Technologies

    Science.gov (United States)

    Chavers, Greg

    2015-01-01

    Since 2006 NASA has been formulating robotic missions to the lunar surface through programs and projects like the Robotic Lunar Exploration Program, Lunar Precursor Robotic Program, and International Lunar Network. All of these were led by NASA Marshall Space Flight Center (MSFC). Due to funding shortfalls, the lunar missions associated with these efforts, the designs, were not completed. From 2010 to 2013, the Robotic Lunar Lander Development Activity was funded by the Science Mission Directorate (SMD) to develop technologies that would enable and enhance robotic lunar surface missions at lower costs. In 2013, a requirements-driven, low-cost robotic lunar lander concept was developed for the Resource Prospector Mission. Beginning in 2014, The Advanced Exploration Systems funded the lander team and established the MSFC, Johnson Space Center, Applied Physics Laboratory, and the Jet Propulsion Laboratory team with MSFC leading the project. The lander concept to place a 300-kg rover on the lunar surface has been described in the New Technology Report Case Number MFS-33238-1. A low-cost lander concept for placing a robotic payload on the lunar surface is shown in figures 1 and 2. The NASA lander team has developed several lander concepts using common hardware and software to allow the lander to be configured for a specific mission need. In addition, the team began to transition lander expertise to United States (U.S.) industry to encourage the commercialization of space, specifically the lunar surface. The Lunar Cargo Transportation and Landing by Soft Touchdown (CATALYST) initiative was started and the NASA lander team listed above is partnering with three competitively selected U.S. companies (Astrobotic, Masten Space Systems, and Moon Express) to develop, test, and operate their lunar landers.

  14. Powder technology

    International Nuclear Information System (INIS)

    Agueda, Horacio

    1989-01-01

    Powder technology is experiencing nowadays a great development and has broad application in different fields: nuclear energy, medicine, new energy sources, industrial and home artifacts, etc. Ceramic materials are of daily use as tableware and also in the building industry (bricks, tiles, etc.). However, in machine construction its utilization is not so common. The same happens with metals: powder metallurgy is employed less than traditional metal forming techniques. Both cases deal with powder technology and the forming techniques as far as the final consolidation through sintering processes are very similar. There are many different methods and techniques in the forming stage: cold-pressing, slip casting, injection molding, extrusion molding, isostatic pressing, hot-pressing (which involves also the final consolidation step), etc. This variety allows to obtain almost any desired form no matter how complex it could be. Some applications are very specific as in the case of UO 2 pellets (used as nuclear fuels) but with the same technique and other materials, it is possible to manufacture a great number of different products. This work shows the characteristics and behaviour of two magnetic ceramic materials (ferrites) fabricated in the laboratory of the Applied Research Division of the Bariloche Atomic Center for different purposes. Other materials and products made with the same method are also mentioned. Likewise, densities and shrinkage obtained by different methods of forming (cold-pressing, injection molding, slip casting and extrusion molding) using high-purity alumina (99.5% Al 2 O 3 ). Finally, different applications of such methods are given. (Author) [es

  15. Technology programme

    International Nuclear Information System (INIS)

    2007-01-01

    The technology activities carried out by the EURATOM-ENEA Association concern the continuation of the European Fusion Development Agreement (EFDA) as well as the ITER activities coordinated by the ITER International Office and Fusion for Energy. Also included in the activities are design and RD under the Broader Approach Agreement between the EU and Japan. In order to better contribute to the programme a number of consortium agreements among the Associations are being signed. Collaboration with industries in view of their participation in the construction of ITER was further strengthened, mainly in the field of magnet and divertor components. The new European Test Blanket Facility at ENEA Brasimone was completed; the design of the ITER radial neutron camera was optimised and the performance achievable with the in-vessel viewing system was further assessed by experimental trials. Design activities for the JT-60SA magnet and power supply system as well as the design and experimental activities related to the target of the International Fusion Materials Irradiation Facility were continued. Significant work was done to define quality assurance for neutronics analyses. Mockups of the ITER pre-compression ring made in glass fibre epoxy were tested. The activities and results documented in the following illustrate ENEA's efforts to support fusion development

  16. How Technology Teachers Understand Technological Knowledge

    Science.gov (United States)

    Norström, Per

    2014-01-01

    Swedish technology teachers' views of technological knowledge are examined through a written survey and a series of interviews. The study indicates that technology teachers' understandings of what constitutes technological knowledge and how it is justified vary considerably. The philosophical discussions on the topic are unknown to them. This lack…

  17. International technology transfer

    International Nuclear Information System (INIS)

    Kwon, Won Gi

    1991-11-01

    This book introduces technology progress and economic growth, theoretical consideration of technology transfer, policy and mechanism on technology transfer of a developed country and a developing country, reality of international technology transfer technology transfer and industrial structure in Asia and the pacific region, technology transfer in Russia, China and Eastern Europe, cooperation of science and technology for development of Northeast Asia and strategy of technology transfer of Korea.

  18. Technological capabilities, technological dynamism and innovation offshoring

    OpenAIRE

    Schubert, Torben; Baier, Elisabeth; Rammer, Christian

    2016-01-01

    In this paper we analyze the conditions under which firms decide to offshore innovation. We consider the role of internal technological capabilities and technological dynamism in the firm environment, distinguishing speed and uncertainty of technological change. Using unique data from the German Innovation Survey we find that while high speed of technological change tends to drive innovation offshoring, high uncertainty about future technology developments results in more innovation offsho...

  19. Flywheel Technology

    Science.gov (United States)

    Ritchie, Lisa M.

    2004-01-01

    Throughout the summer of 2004, I am working on a number of different projects. While located in the Space Power and Propulsion Test Engineering branch, my main area of study is flywheel technology. I have been exposed to flywheels, their components, and their uses in today's society. I have been able to experience numerous flywheels here in the flywheel lab at NASA Glenn. My first main project was to explore the attributes and physical characteristics of a flywheel. Our branch was constructing a flywheel demonstration to be presented at the public open house taking place in June. Our Flywheel Interactive Demo, or FIDO, represents a real life multi-flywheel system here at NASA. I was given the opportunity to learn about how these flywheels store energy and are able to position a satellite. With all of this new knowledge, I was able to create the posters that explained how our demonstration worked. I also composed a step-by-step process made up of four experiments that any visitor could follow and perform on FIDO. By stepping through these experiments, the individual learns how a flywheel works. They not only read the explanation of what is happening, but they are also able to see it happen. Creating these two posters not only taught me, but also helped teach the general public during the open house, how flywheel technology is a very important part of our future. Through my research, I have learned that flywheels are able to store massive amounts of energy. They can be described as an electro-mechanical battery that stores kinetic energy while rotating. The faster it rotates, the more energy it stores. Their lifetime is about triple that of an ordinary battery. Flywheels also have the ability to combine energy storage with attitude control all in a single system. Attitude control is the ability to position a satellite as required. FIDO helps us to understand the rotational force (torque) that is applied upon a turn-table or satellite during wheel acceleration

  20. Marketing technologically advanced products

    OpenAIRE

    Bender, Horst

    1989-01-01

    This paper calls for a merger of technology and marketing under a customer value perspective; for an enhancement of the traditional technological innovation orientation of the technology-based firm with a market thrust. It establishes technology-based products as product-service offerings that are derived from technological innovation. The aim in marketing technology-based products is an improved understanding of how an organization can combine a technology orientation with a customer value t...

  1. Sports and Technology. Resources in Technology.

    Science.gov (United States)

    Hadley, Fred W.

    1993-01-01

    Technology is making a significant impact in all areas of sports and recreation. New equipment and computer training methods in spectator sports have had a major social and economic impact, and individual sports have reaped the benefits of technology. (JOW)

  2. Plasma technology directory

    International Nuclear Information System (INIS)

    Ward, P.P.; Dybwad, G.L.

    1995-01-01

    The Plasma Technology Directory has two main goals: (1) promote, coordinate, and share plasma technology experience and equipment within the Department of Energy; and (2) facilitate technology transfer to the commercial sector where appropriate. Personnel are averaged first by Laboratory and next by technology area. The technology areas are accelerators, cleaning and etching deposition, diagnostics, and modeling

  3. Hydrogen technologies and the technology learning curve

    International Nuclear Information System (INIS)

    Rogner, H.-H.

    1998-01-01

    On their bumpy road to commercialization, hydrogen production, delivery and conversion technologies not only require dedicated research, development and demonstration efforts, but also protected niche markets and early adopters. While niche markets utilize the unique technological properties of hydrogen, adopters exhibit a willingness to pay a premium for hydrogen fueled energy services. The concept of the technology learning curve is applied to estimate the capital requirements associated with the commercialization process of several hydrogen technologies. (author)

  4. International Technology Transfer.

    Science.gov (United States)

    Morris, Robert G.

    The flow of technology out of the United States is discussed. Methods of technology flow, such as licensing and investing, are identified, and the advantages and disadvantages of technology transfer are discussed, especially in relation to the government's role. (MLH)

  5. Computer technology and evolution

    OpenAIRE

    Mainzer, Klaus

    1998-01-01

    Computer technology and evolution : from artificial intelligence to artificial life. - In: Advances in the philosophy of technology / ed. by Evandro Agazzi ... - Newark, Del. : Soc. for Philosophy and Technology, 1999. - S. 105-119

  6. Excimer Laser Technology

    CERN Document Server

    Basting, Dirk

    2005-01-01

    This comprehensive survey on Excimer Lasers investigates the current range of the technology, applications and devices of this commonly used laser source, as well as the future of new technologies, such as F2 laser technology. Additional chapters on optics, devices and laser systems complete this compact handbook. A must read for laser technology students, process application researchers, engineers or anyone interested in excimer laser technology. An effective and understandable introduction to the current and future status of excimer laser technology.

  7. Technology Transfer Report

    Science.gov (United States)

    2000-01-01

    Since its inception, Goddard has pursued a commitment to technology transfer and commercialization. For every space technology developed, Goddard strives to identify secondary applications. Goddard then provides the technologies, as well as NASA expertise and facilities, to U.S. companies, universities, and government agencies. These efforts are based in Goddard's Technology Commercialization Office. This report presents new technologies, commercialization success stories, and other Technology Commercialization Office activities in 1999.

  8. Technology transfer by multinationals

    OpenAIRE

    Kostyantyn Zuzik

    2003-01-01

    The paper analyses the issue of technology transfer by multinational corporations. The following questions are explored: (a) world market of technologies, the role of MNCs (b) Choice of the technology transfer mode, Dunning's OLI-theory as a factor of the choice of the mode of transfer (c) measurement and profitability of technology transfer (d) transfer of technology through partnerships, JVs, alliances and through M&As (e) aspects of technology transfer by services multinationals. Paper uti...

  9. Morgantown Energy Technology Center, technology summary

    International Nuclear Information System (INIS)

    1994-06-01

    This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Morgantown Energy Technology Center (METC). Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. METC's R ampersand D programs are focused on commercialization of technologies that will be carried out in the private sector. META has solicited two PRDAs for EM. The first, in the area of groundwater and soil technologies, resulted in twenty-one contact awards to private sector and university technology developers. The second PRDA solicited novel decontamination and decommissioning technologies and resulted in eighteen contract awards. In addition to the PRDAs, METC solicited the first EM ROA in 1993. The ROA solicited research in a broad range of EM-related topics including in situ remediation, characterization, sensors, and monitoring technologies, efficient separation technologies, mixed waste treatment technologies, and robotics. This document describes these technology development activities

  10. Constructive Technology Assessmentand Technology Dynamics. The Case of Clean Technologies

    NARCIS (Netherlands)

    Schot, Johan

    1992-01-01

    A synthesis of neo-Schumpeterian evolutionary, sociological, and historical coevolution ary models could be used for constructive technology assessment, aimed at the active management of the process of technological change. This article proposes a synthetic quasi-evolutionary model, in which

  11. Fundamentals of technology roadmapping

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, M.L.; Bray, O.H.

    1997-04-01

    Technology planning is important for many reasons. Globally, companies are facing many competitive problems. Technology roadmapping, a form of technology planning can help deal with this increasingly competitive environment. While it has been used by some companies and industries, the focus has always been on the technology roadmap as a product, not on the process. This report focuses on formalizing the process so that it can be more broadly and easily used. As a DOE national security laboratory with R&D as a major product, Sandia must do effective technology planning to identify and develop the technologies required to meet its national security mission. Once identified, technology enhancements or new technologies may be developed internally or collaboratively with external partners. For either approach, technology roadmapping, as described in this report, is an effective tool for technology planning and coordination, which fits within a broader set of planning activities. This report, the second in a series on technology roadmapping, develops and documents this technology roadmapping process, which can be used by Sandia, other national labs, universities, and industry. The main benefit of technology roadmapping is that it provides information to make better technology investment decisions by identifying critical technologies and technology gaps and identifying ways to leverage R&D investments. It can also be used as a marketing tool. Technology roadmapping is critical when the technology investment decision is not straight forward. This occurs when it is not clear which alternative to pursue, how quickly the technology is needed, or when there is a need to coordinate the development of multiple technologies. The technology roadmapping process consists of three phases - preliminary activity, development of the technology roadmap, and follow-up activity.

  12. Educational Technology in China

    Science.gov (United States)

    Meifeng, Liu; Jinjiao, Lv; Cui, Kang

    2010-01-01

    This paper elaborates the two different academic views of the identity of educational technology in China at the current time--advanced-technology-oriented cognition, known as Electrifying Education, and problem-solving-oriented cognition, known as Educational Technology. It addresses five main modes of educational technology in China: as a…

  13. EPA'S ENVIRONMENTAL TECHNOLOGIES

    Science.gov (United States)

    The use of innovative technology is impeded by the lack of independent, credible information as to how the technology performs. Such data is needed by technology buyers and regulatory decision makers to make informed decisions on technologies that represent good financial invest...

  14. Emerging technology and ethics

    CERN Document Server

    Wakunuma, Kutoma

    2011-01-01

    This e-book on Emerging Technologies and Ethics includes a collection of essays which explore the future and ethics of emerging information and communication technologies. Articles in the collection include an overview of the legal implications which may be relevant to the ethical aspects of emerging technologies and also ethical issues arising from the mass-take up of mobile technologies.

  15. Student Technology Assistant Programs.

    Science.gov (United States)

    Van Eck, Rick; Marvin, Eric; Burr-McNeal, Blake; Jones, Marshall; Lowther, Deborah

    Schools face significant challenges in implementing computing technology within their curriculum. When technology support falters, the integrity of a school district's entire technology program is at risk. Teachers who have invested time to develop lesson plans using technology, especially those who are still newcomers, are less likely to continue…

  16. Marketing technology in macroeconomics.

    Science.gov (United States)

    Tamegawa, Kenichi

    2012-01-01

    In this paper, we incorporate a marketing technology into a dynamic stochastic general equilibrium model by assuming a matching friction for consumption. An improvement in matching can be interpreted as an increase in matching technology, which we call marketing technology because of similar properties. Using a simulation analysis, we confirm that a positive matching technology shock can increase output and consumption.

  17. Marketing technologically advanced products

    NARCIS (Netherlands)

    Bender, Horst

    1989-01-01

    This paper calls for a merger of technology and marketing under a customer value perspective; for an enhancement of the traditional technological innovation orientation of the technology-based firm with a market thrust. It establishes technology-based products as product-service offerings that are

  18. Soil washing technology evaluation

    International Nuclear Information System (INIS)

    Suer, A.

    1995-04-01

    Environmental Restoration Engineering (ERE) continues to review innovative, efficient, and cost effective technologies for SRS soil and/or groundwater remediation. As part of this effort, this technical evaluation provides review and the latest information on the technology for SRS soil remediation. Additional technology evaluation reports will be issued periodically to update these reports. The purpose of this report is to review the soil washing technology and its potential application to SRS soil remediation. To assess whether the Soil Washing technology is a viable option for SRS soil remediation, it is necessary to review the technology/process, technology advantages/limitations, performance, applications, and cost analysis

  19. NASA Technology Transfer System

    Science.gov (United States)

    Tran, Peter B.; Okimura, Takeshi

    2017-01-01

    NTTS is the IT infrastructure for the Agency's Technology Transfer (T2) program containing 60,000+ technology portfolio supporting all ten NASA field centers and HQ. It is the enterprise IT system for facilitating the Agency's technology transfer process, which includes reporting of new technologies (e.g., technology invention disclosures NF1679), protecting intellectual properties (e.g., patents), and commercializing technologies through various technology licenses, software releases, spinoffs, and success stories using custom built workflow, reporting, data consolidation, integration, and search engines.

  20. Physics and high technology

    International Nuclear Information System (INIS)

    Shao Liqin; Ma Junru.

    1992-01-01

    At present, the development of high technology has opened a new chapter in world's history of science and technology. This review describes the great impact of physics on high technology in six different fields (energy technology, new materials, information technology, biotechnology, space technology, and Ocean technology). It is shown that the new concepts and new methods created in physics and the special conditions and measurements established for physics researches not only deepen human's knowledge about nature but also point out new directions for engineering and technology. The achievements in physics have been more and more applied to high technology, while the development of high technology has explored some new research areas and raised many novel, important projects for physics. Therefore, it is important for us to strengthen the research on these major problems in physics

  1. Advancement in Engineering Technology

    DEFF Research Database (Denmark)

    Kalia, Kartik; Rehman, M. Atiqur; Hussain, Dil muhammed Akbar

    2016-01-01

    but to harvest those ideas, technology is a must. With the huge requirement of engineering equipment's, the industry needs specialists who can manage and operate these technologies. Detailed information about the merits and demerits of technology is also mentioned in this paper. Findings: Technology has affected...... the environment on a great scale; in some cases, technology is even replacing human being or use of manpower. So proper counter measures have been mentioned, which can be used to control and limit harmful effect....

  2. Newnes communications technology handbook

    CERN Document Server

    Lewis, Geoff

    1994-01-01

    Newnes Communications Technology Handbook provides a discussion on different topics relevant to communications technology. The book is comprised of 39 chapters that tackle a wide variety of concern in communications technology. The coverage of the text includes technologies, such as analog digital communications systems, radio frequency receiver, and satellite systems. The book also discusses some methods and techniques used in communications technology, including mixer signal processing, modulation and demodulation, and spread spectrum techniques. The text will be of great use to engineers, t

  3. Emerging Technologies Integrating Technology into Study Abroad

    Science.gov (United States)

    Godwin-Jones, Robert

    2016-01-01

    "Ready access to travel and to technology-enhanced social networking (e.g., Facebook or Skype) has changed the nature of study abroad to the point where today's experiences are fundamentally different from those of earlier eras" (Kinginger, 2013a, p. 345). In addition to more travel options and greater technology availability, study…

  4. Educational technology and the new technologies

    NARCIS (Netherlands)

    Verhagen, Pleunes Willem; Plomp, T.

    1989-01-01

    Like everywhere in our culture, new technologies gradually penetrate the field of education. This may be seen as a problem area, which asks for appropriate, actions by teachers, curriculum experts, instructional designers and others. As "technology" seems to be the main issue,one may quation whether

  5. Search Technologies | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

  6. Available Technologies | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

  7. SHARED TECHNOLOGY TRANSFER PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    GRIFFIN, JOHN M. HAUT, RICHARD C.

    2008-03-07

    The program established a collaborative process with domestic industries for the purpose of sharing Navy-developed technology. Private sector businesses were educated so as to increase their awareness of the vast amount of technologies that are available, with an initial focus on technology applications that are related to the Hydrogen, Fuel Cells and Infrastructure Technologies (Hydrogen) Program of the U.S. Department of Energy. Specifically, the project worked to increase industry awareness of the vast technology resources available to them that have been developed with taxpayer funding. NAVSEA-Carderock and the Houston Advanced Research Center teamed with Nicholls State University to catalog NAVSEA-Carderock unclassified technologies, rated the level of readiness of the technologies and established a web based catalog of the technologies. In particular, the catalog contains technology descriptions, including testing summaries and overviews of related presentations.

  8. ACR-700 advanced technologies

    International Nuclear Information System (INIS)

    Tapping, R.L.; Turner, C.W.; Yu, S.K.W.; Olmstead, R.; Speranzini, R.A.

    2004-01-01

    A successful advanced reactor plant will have optimized economics including reduced operating and maintenance costs, improved performance, and enhanced safety. Incorporating improvements based on advanced technologies ensures cost, safety and operational competitiveness of the ACR-700. These advanced technologies include modern configuration management; construction technologies; operational technology for the control centre and information systems for plant monitoring and analysis. This paper summarizes the advanced technologies used to achieve construction and operational improvements to enhance plant economic competitiveness, advances in the operational technology used for reactor control, and presents the development of the Smart CANDU suite of tools and its application to existing operating reactors and to the ACR-700. (author)

  9. Avionics systems integration technology

    Science.gov (United States)

    Stech, George; Williams, James R.

    1988-01-01

    A very dramatic and continuing explosion in digital electronics technology has been taking place in the last decade. The prudent and timely application of this technology will provide Army aviation the capability to prevail against a numerically superior enemy threat. The Army and NASA have exploited this technology explosion in the development and application of avionics systems integration technology for new and future aviation systems. A few selected Army avionics integration technology base efforts are discussed. Also discussed is the Avionics Integration Research Laboratory (AIRLAB) that NASA has established at Langley for research into the integration and validation of avionics systems, and evaluation of advanced technology in a total systems context.

  10. The Human Technology

    DEFF Research Database (Denmark)

    Fausing, Bent

    towards this very special and lost humanity. Without the technology, no special humanity is the prophecy. This personification or anthropomorphism is important for the branding of new technology. The technology is seen as creating a technotranscendens towards a more qualified humanity, which is in contact...... with fundamental human values like intuition, vision and sensing; all the qualities the technology, the industrialisation and rationalisation, or in short modernity, has been criticized for having taken away from human existence. What technology has taken away now comes back through new technology as an aid...

  11. [Health technology in Mexico].

    Science.gov (United States)

    Cruz, C; Faba, G; Martuscelli, J

    1992-01-01

    The features of the health technology cycle are presented, and the effects of the demographic, epidemiologic and economic transition on the health technology demand in Mexico are discussed. The main problems of science and technology in the context of a decreasing scientific and technological activity due to the economic crisis and the adjustment policies are also analyzed: administrative and planning problems, low impact of scientific production, limitations of the Mexican private sector, and the obstacles for technology assessment. Finally, this paper also discusses the main support strategies for science and technology implemented by the Mexican government during the 1980s and the challenges and opportunities that lie ahead.

  12. Focus on Technologies: Worry or Technology?

    Directory of Open Access Journals (Sweden)

    Saulius Kanišauskas

    2015-10-01

    Full Text Available The paper analyses different attitudes towards technologies in contemporary philosophical discourses. It points out that classical notion of technology formulated by Martin Heidegger seems to be more and more often questioned and even forgotten. As a result, it is being replaced by the theory of determinism, according to which the change of technologies determines the changes in social systems, the human being including. This happens this way and not vice versa. Nowadays technē, or “technika” (in English: technology is mostly understood in the instrumental meaning or in the meaning of power. It is considered to be a powerful means, tool or mechanism to influence, change, control and manipulate human consciousness and human feelings. Despite the fact that technologies have already been tamed, the problem of huge responsibility for using and developing them arises. It is questioned whether the increasing society’s attention to modern technologies is not a particular “technology” of the postmodern capitalism to manipulate social consciousness. In parallel with “yes” answer to this question, Albert Borgmann’s idea that the causes of technological development have an ontological dimension, i.e. the causes are rooted in the nature of human beings themselves and their desire to adore own creativity, is discussed. Thus, it becomes necessary to probe deeper into the nature of creativity.

  13. General survey of technology management

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Yong Ha; Jang Dong Hun; Lee, In Woo

    1999-02-15

    The content of this book are technology and management, conception of technology management, feature and model of technology management system, elements of technology management, performance measurement of technology management, connectivity between technology and business function, system management of technology, manpower management, readership and technology management, motivation and technology management, management of technical investment evaluation, new item development and marketing, product liability management, intellectual property rights and transfer of technology.

  14. General survey of technology management

    International Nuclear Information System (INIS)

    Shin, Yong Ha; Jang Dong Hun; Lee, In Woo

    1999-02-01

    The content of this book are technology and management, conception of technology management, feature and model of technology management system, elements of technology management, performance measurement of technology management, connectivity between technology and business function, system management of technology, manpower management, readership and technology management, motivation and technology management, management of technical investment evaluation, new item development and marketing, product liability management, intellectual property rights and transfer of technology.

  15. Photon technology. Laser processing technology; Photon technology. Laser process gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Survey has been conducted to develop laser processing technology utilizing the interaction between substance and photon. This is a part of the leading research on photon technology development. The photon technology development is aimed at novel technology development highly utilizing the quantum nature of photons. In the field of laser processing, high quality photons are used as tools, special functions of atoms and molecules will be discovered, and processing for functional fabrication (photon machining) will be established. A role of laser processing in industries has become significant, which is currently spreading not only into cutting and welding of materials and scalpels but also into such a special field as ultrafine processing of materials. The spreading is sometimes obstructed due to the difficulty of procurement of suitable machines and materials, and the increase of cost. The purpose of this study is to develop the optimal laser technology, to elucidate the interaction between substance and photon, and to develop the laser system and the transmission and regulation systems which realize the optimal conditions. 387 refs., 115 figs., 25 tabs.

  16. CSIR Technology Impact 1996

    CSIR Research Space (South Africa)

    CSIR

    1996-01-01

    Full Text Available This issue of Technology Impact offers a brief snapshot of CSIR activities during the year under review by highlighting a number of innovative projects and initiatives in these areas. It presents a rich canvas portrays technology solutions...

  17. Resources, Technology, and Strategy

    DEFF Research Database (Denmark)

    Resources, Technology and Strategy brings together contributors from Europe, North America and Asia to consider the strategic relationship between technology and other resources, such as production capabilities, marketing prowess, finance and organisational culture. Throughout the book...

  18. Solar Thermal Energy Technology

    Energy Technology Data Exchange (ETDEWEB)

    Cason, D.L.; Pitsenbarger, J. [eds.

    1996-02-01

    Solar Thermal Energy Technology (PST) announces on a bimonthly basis the current worldwide research and development information that would expand the technology base required for the advancement of solar thermal systems as a significant energy resource.

  19. INFORMATION TECHNOLOGIES IN TOURISM

    OpenAIRE

    Radka Tosheva; Aleksandrina Gancheva

    2016-01-01

    In this article the focus is on the role of information technology in tourism, tourism business, electronic payments, software used by tourist companies, new technologies for online advertising and shopping, software for mobile devices.

  20. Technology in Residence.

    Science.gov (United States)

    Fox, Jordan

    1999-01-01

    Discusses the necessity for incorporating current technology in today's college residence halls to meet the more diverse and continued activities of its students. Technology addressed covers data networking and telecommunications, heating and cooling systems, and fire-safety systems. (GR)

  1. Technology Readiness Level Guidebook

    Science.gov (United States)

    2017-09-01

    This guidebook provides the necessary information for conducting a Technology Readiness Level (TRL) Assessment. TRL Assessments are a tool for determining the maturity of technologies and identifying next steps in the research process. This guidebook...

  2. Assisted Reproductive Technology (ART)

    Science.gov (United States)

    ... Share Facebook Twitter Pinterest Email Print Assisted Reproductive Technology (ART) ART refers to treatments and procedures that ... American Society for Reproductive Medicine. (2015). Assisted reproductive technologies: A guide for patients . Retrieved May 31, 2016, ...

  3. Genealogies of Modern Technology

    DEFF Research Database (Denmark)

    Riis, Søren

    2008-01-01

    Does modern technology differ from ancient technology and does it have a unique essence? This twofold question opens one of Martin Heidegger's most influential philosophical inquiries, The Question Concerning Technology. The answer Heidegger offers has inspired various critiques and appraisals from...... a vast number of contemporary scholars of technology.1 Heidegger's answer is traditionally thought to suggest a great difference between ancient and modern technology. However, by re-examining Heidegger's text, it is possible to discover previously ignored or misunderstood lines of thoughts that affirm...... a multi-stable interpretation of the origin of modern technology. In what follows, we shall see how The Question Concerning Technology in fact supports three different genealogies of modern technology...

  4. Technology Implementation Plan

    DEFF Research Database (Denmark)

    Jensen, Karsten Ingerslev; Schultz, Jørgen Munthe

    The Technology Implementation Plan (TIP) describes the main project results and the intended future use. The TIP is confidential.......The Technology Implementation Plan (TIP) describes the main project results and the intended future use. The TIP is confidential....

  5. Crystal-Clear Technology.

    Science.gov (United States)

    Ondris-Crawford, Renate J.; And Others

    1993-01-01

    Provides diagrams to aid in discussing polymer dispersed liquid crystal (PDLC) technology. Equipped with a knowledge of PDLC, teachers can provide students with insight on how the gap between basic science and technology is bridged. (ZWH)

  6. Technology licensing in China

    DEFF Research Database (Denmark)

    Wang, Yuandi; Li-Ying, Jason; Chen, Jin

    2015-01-01

    We explore the landscape of technology licensing among Chinese entities in the period 2000–12, using a unique database on technological licensing from the State Intellectual Property Office of China. We find that: first, among Chinese licensee organizations, firms have dominated in terms of the n......We explore the landscape of technology licensing among Chinese entities in the period 2000–12, using a unique database on technological licensing from the State Intellectual Property Office of China. We find that: first, among Chinese licensee organizations, firms have dominated in terms...... of the number of licensed technologies; second, the geographical distribution of licensed technologies among the provinces has gradually reached a new quantitative balance; third, utility models are the most popular technologies to be licensed and the majority of technology licensing in China has been between...

  7. Environmental technology verification methods

    CSIR Research Space (South Africa)

    Szewczuk, S

    2016-03-01

    Full Text Available Environmental Technology Verification (ETV) is a tool that has been developed in the United States of America, Europe and many other countries around the world to help innovative environmental technologies reach the market. Claims about...

  8. Clean Air Technology Center

    Science.gov (United States)

    The Clean Air Technology Center provides resources for emerging and existing air pollution prevention and control technologies and provides public access to data and information on their use, effectiveness and cost.

  9. CSIR Technology Impact 1994

    CSIR Research Space (South Africa)

    CSIR

    1994-01-01

    Full Text Available This issue of Technology Impact offers a brief snapshot of CSIR activities during the year under review by highlighting a number of innovative projects and initiatives in these areas. It presents a rich canvas portrays technology solutions...

  10. INFORMATION TECHNOLOGIES IN TOURISM

    Directory of Open Access Journals (Sweden)

    Radka Tosheva

    2016-12-01

    Full Text Available In this article the focus is on the role of information technology in tourism, tourism business, electronic payments, software used by tourist companies, new technologies for online advertising and shopping, software for mobile devices.

  11. Ship propulsion reactors technology

    International Nuclear Information System (INIS)

    Fribourg, Ch.

    2002-01-01

    This paper takes the state of the art on ship propulsion reactors technology. The french research programs with the corresponding technological stakes, the reactors specifications and advantages are detailed. (A.L.B.)

  12. Dismantling technologies trends

    International Nuclear Information System (INIS)

    Devaux, P.

    2009-01-01

    In this work dismantling technologies trends realized by the CEA are reviewed. There following technologies are presented: Data acquisition from facilities; Scenario studies; Remote handling and carriers; Dismantling techniques; Decontamination.

  13. TECHNOLOGICAL IMPLEMENTATION PLAN

    DEFF Research Database (Denmark)

    Bellini, Anna

    2004-01-01

    This document has the purpose to describe the technological implementation plan in the IDEAL project.......This document has the purpose to describe the technological implementation plan in the IDEAL project....

  14. CSIR Technology Impact 1993

    CSIR Research Space (South Africa)

    CSIR

    1993-01-01

    Full Text Available This issue of Technology Impact offers a brief snapshot of CSIR activities during the year under review by highlighting a number of innovative projects and initiatives in these areas. It presents a rich canvas portrays technology solutions...

  15. CSIR Technology Impact 2000

    CSIR Research Space (South Africa)

    CSIR

    2000-01-01

    Full Text Available This millennium issue of Technology Impact celebrates the CSIR's contributions during the transitional 1999/2000 year. It presents a rich canvas portrays technology solutions and information which have touched the lives of people both within...

  16. CSIR Technology Impact 1999

    CSIR Research Space (South Africa)

    CSIR

    1999-01-01

    Full Text Available This issue of Technology Impact offers a brief snapshot of CSIR activities during the year under review by highlighting a number of innovative projects and initiatives in these areas. It presents a rich canvas portrays technology solutions...

  17. Fusion technology (FT)

    International Nuclear Information System (INIS)

    1978-01-01

    The annual report of tha fusion technology (FT) working group discusses the projects carried out by the participating institutes in the fields of 1) fuel injection and plasma heating, 2) magnetic field technology, and 3) systems investigations. (HK) [de

  18. ADVANTAGES OF GREEN TECHNOLOGY

    OpenAIRE

    Ghanshyam Das Soni

    2017-01-01

    Technology is application of knowledge to practical requirements. Green technologies encompass various aspects of technology which help us reduce the human impact on the environment and create ways of sustainable development. Social equitability, economic feasibility and sustainability are the key parameters for green technologies. Today the environment is racing towards the tipping point at which we would have done permanent irreversible damage to the planet earth. Our current actions are pu...

  19. New Mobile Technologies

    DEFF Research Database (Denmark)

    Tan, Su-En; Henten, Anders

    2006-01-01

    This paper takes a look at Clayton Christensen 's theory of disruptive technologies and how Christensen's theory relates to other innovation theories. It also proposes a new layer of analysis to this theory to better link the technology analysis to the market analysis of any given technology...... product. This layer suggests that complementarity and substitutability are important criteria for technologies to be market disruptions or sustaining changes....

  20. Emerging Technologies for Telemedicine

    Science.gov (United States)

    Minh, Cao Duc; Antoku, Yasuaki; Torata, Nobuhiro; Kudo, Kuriko; Okamura, Koji; Nakashima, Naoki; Tanaka, Masao

    2012-01-01

    This paper focuses on new technologies that are practically useful for telemedicine. Three representative systems are introduced: a Digital Video Transport System (DVTS), an H.323 compatible videoconferencing system, and Vidyo. Based on some of our experiences, we highlight the advantages and disadvantages of each technology, and point out technologies that are especially targeted at doctors and technicians, so that those interested in using similar technologies can make appropriate choices and achieve their own goals depending on their specific conditions. PMID:22563284

  1. Developments in lubricant technology

    CERN Document Server

    Srivastava, S P

    2014-01-01

    Provides a fundamental understanding of lubricants and lubricant technology including emerging lubricants such as synthetic and environmentally friendly lubricants Teaches the reader to understand the role of technology involved in the manufacture of lubricants Details both major industrial oils and automotive oils for various engines Covers emerging lubricant technology such as synthetic and environmentally friendly lubricants Discusses lubricant blending technology, storage, re-refining and condition monitoring of lubricant in equipment

  2. Rationalizing social technologies

    OpenAIRE

    V V Scherbina

    2016-01-01

    The article considers the problem of defining the specifics and types of social technologies (hereinafter ST). The author pursues the following objectives: first, to clarify the specific features of social technologies; second, to identify the grounds for classifying the existing types of social technologies; third, to describe the basic characteristics (functions, tasks, tools, the scope and limits of application, and ideological bases) of social technologies; fourth, to identify the basic f...

  3. NASA Astrophysics Technology Needs

    Science.gov (United States)

    Stahl, H. Philip

    2012-01-01

    July 2010, NASA Office of Chief Technologist (OCT) initiated an activity to create and maintain a NASA integrated roadmap for 15 key technology areas which recommend an overall technology investment strategy and prioritize NASA?s technology programs to meet NASA?s strategic goals. Science Instruments, Observatories and Sensor Systems(SIOSS) roadmap addresses technology needs to achieve NASA?s highest priority objectives -- not only for the Science Mission Directorate (SMD), but for all of NASA.

  4. Consuming technologies - developing routines

    DEFF Research Database (Denmark)

    Gram-Hanssen, Kirsten

    2008-01-01

    technologies and in this article these processes will be investigated from three different perspectives: an historical perspective of how new technologies have entered homes, a consumer perspective of how both houses and new technologies are purchased and finally, as the primary part of the article, a user...... perspective of how routines develop while these technologies are being used. In the conclusion these insights are discussed in relation to possible ways of influencing routines....

  5. Magnetic fusion technology

    CERN Document Server

    Dolan, Thomas J

    2014-01-01

    Magnetic Fusion Technology describes the technologies that are required for successful development of nuclear fusion power plants using strong magnetic fields. These technologies include: ? magnet systems, ? plasma heating systems, ? control systems, ? energy conversion systems, ? advanced materials development, ? vacuum systems, ? cryogenic systems, ? plasma diagnostics, ? safety systems, and ? power plant design studies. Magnetic Fusion Technology will be useful to students and to specialists working in energy research.

  6. Frontiers in biochip technology

    National Research Council Canada - National Science Library

    Xing, Wan-Li; Cheng, Jing

    2006-01-01

    ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . Haiching Ma, Yuan Wang, Amy S. Pomaybo, and Connie Tsai 2. Improvement of Microarray Technologies for Detecting Single Nucleotide Mismatch...

  7. Conducting a Technology Audit

    Science.gov (United States)

    Flaherty, William

    2011-01-01

    Technology is a critical component in the success of any high-functioning school district, thus it is important that education leaders should examine it closely. Simply put, the purpose of a technology audit is to assess the effectiveness of the technology for administrative or instructional use. Rogers Public Schools in Rogers, Arkansas, recently…

  8. Selecting Security Technology Providers

    Science.gov (United States)

    Schneider, Tod

    2009-01-01

    The world of security technology holds great promise, but it is fraught with opportunities for expensive missteps and misapplications. The quality of the security technology consultants and system integrators one uses will have a direct bearing on how well his school masters this complex subject. Security technology consultants help determine…

  9. Sex, Technology and Morality.

    Science.gov (United States)

    Case, Verna; And Others

    1986-01-01

    Provides an overview of the course "Sex, Technology, and Morality" which focuses on the human reproductive process and examines the advances in reproductive technology. The course emphasizes the social, political, and ethical implications of actual and possible technologies associated with human reproduction. (ML)

  10. Technological Style is History

    DEFF Research Database (Denmark)

    Blond, Lasse

    The effort to comprehend innovation across cultures and time highlights the importance of the explicating factors external to technology. It becomes relevant to nuance or differentiate the understanding of social and cultural responses to adopted technologies by recognizing that technology shapes...

  11. JAPAN'S TECHNOLOGY TRADE

    OpenAIRE

    Hagiwara, Taiji

    1994-01-01

    Japan's technology balance of trade has improved over the last twenty years. The position of Japan is examined through (1) comparison with other OECD countries, (2) the historical change in Japan's technology trade at the industry level, (3) Toshiba's technology trade as a typical case. The conclusion is that Japan is still behind the frontier of innovation.

  12. Power Technologies Data Book

    Energy Technology Data Exchange (ETDEWEB)

    Goldstein, L.

    2002-09-01

    This report, prepared by NREL's Energy Analysis Office, includes up-to-date information on power technologies, including complete technology profiles. The data book also contains charts on electricity restructuring, power technology forecasts and comparisons, electricity supply, electricity capability, electricity generation, electricity demand, prices, economic indicators, environmental indicators, conversion factors, and selected congressional questions and answers.

  13. Exploring Technology Education.

    Science.gov (United States)

    Van Duzer, Eric

    Modular middle school technology programs, generically called Exploring Technology Education (ETE) courses, are described and analyzed to determine their strengths and weaknesses and their appropriate role in middle school curricula. Interviews were conducted with teachers, officers of the Exploring Technology Educators Association, vendors and…

  14. Advanced manufacturing: Technology diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Tesar, A.

    1995-12-01

    In this paper we examine how manufacturing technology diffuses rom the developers of technology across national borders to those who do not have the capability or resources to develop advanced technology on their own. None of the wide variety of technology diffusion mechanisms discussed in this paper are new, yet the opportunities to apply these mechanisms are growing. A dramatic increase in technology diffusion occurred over the last decade. The two major trends which probably drive this increase are a worldwide inclination towards ``freer`` markets and diminishing isolation. Technology is most rapidly diffusing from the US In fact, the US is supplying technology for the rest of the world. The value of the technology supplied by the US more than doubled from 1985 to 1992 (see the Introduction for details). History shows us that technology diffusion is inevitable. It is the rates at which technologies diffuse to other countries which can vary considerably. Manufacturers in these countries are increasingly able to absorb technology. Their manufacturing efficiency is expected to progress as technology becomes increasingly available and utilized.

  15. Optimizing Computer Technology Integration

    Science.gov (United States)

    Dillon-Marable, Elizabeth; Valentine, Thomas

    2006-01-01

    The purpose of this study was to better understand what optimal computer technology integration looks like in adult basic skills education (ABSE). One question guided the research: How is computer technology integration best conceptualized and measured? The study used the Delphi method to map the construct of computer technology integration and…

  16. Creative Technology and Rap

    Science.gov (United States)

    Ch'ien, Evelyn

    2011-01-01

    This paper describes how a linguistic form, rap, can evolve in tandem with technological advances and manifest human-machine creativity. Rather than assuming that the interplay between machines and technology makes humans robotic or machine-like, the paper explores how the pressure of executing artistic visions using technology can drive…

  17. Technology in Education

    Science.gov (United States)

    Roden, Kasi

    2011-01-01

    This paper was written to support a position on using technology in education. The purpose of this study was to support the use of technology in education by synthesizing previous research. A variety of sources including books and journal articles were studied in order to compile an overview of the benefits of using technology in elementary,…

  18. Connecting Technology and Learning.

    Science.gov (United States)

    Woolley, Ginny

    1998-01-01

    Teacher training programs must go beyond "how-to" workshops to facilitate understanding about technology's relationship to learning. An International School of Bangkok training program transforms teachers into learners immersed in technology-rich environments. The process involves seven phases: getting ready, learning about technology,…

  19. Materials and technology

    International Nuclear Information System (INIS)

    Gockel, E.; Simon, J.

    1998-01-01

    New materials and the processes for their economical fabrication and use are the factors which drive innovation in totally different fields of technology, such as energy engineering, transport, and information. But they also open up new fields of technology such as micro systems or medicine technology. Five out of a total of twelve articles are separately listed in the ENERGY database [de

  20. Lucas Heights technology park

    International Nuclear Information System (INIS)

    1987-01-01

    The proposed Lucas Heights Technology Park will pound together the applied research programs of Government, tertiary and industry sectors, aiming to foster technology transfer particularly to the high-technology manufacturing industry. A description of the site is given along with an outline of the envisaged development, existing facilities and expertise. ills

  1. Teaching Information Technology Law

    Science.gov (United States)

    Taylor, M. J.; Jones, R. P.; Haggerty, J.; Gresty, D.

    2009-01-01

    In this paper we discuss an approach to the teaching of information technology law to higher education computing students that attempts to prepare them for professional computing practice. As information technology has become ubiquitous its interactions with the law have become more numerous. Information technology practitioners, and in particular…

  2. E-Business Technologies

    OpenAIRE

    Carmen TIMOFTE

    2007-01-01

    Internet technologies have revolutionized the business world by creating a global online marketplace. Appropriate understanding for the technologies and the impact of different design choices of technologies (including the Internet and open systems) dramatically affects both functional and non-functional aspects of the e-business solution.

  3. Education Technology Success Stories

    Science.gov (United States)

    West, Darrell M.; Bleiberg, Joshua

    2013-01-01

    Advances in technology are enabling dramatic changes in education content, delivery, and accessibility. Throughout history, new technologies have facilitated the exponential growth of human knowledge. In the early twentieth century, the focus was on the use of radios in education. But since then, innovators have seen technology as a way to improve…

  4. Education Technology Transformation

    Science.gov (United States)

    Kennedy, Mike

    2012-01-01

    Years ago, as personal computers and other technological advancements began to find their way into classrooms and other educational settings, teachers and administrators sought ways to use new technology to benefit students. The potential for improving education was clear, but the limitations of the available education technology made it difficult…

  5. Moralizing Food Technology

    DEFF Research Database (Denmark)

    Coff, Christian Eyde

    2015-01-01

    Food technologies are common on many levels in society and used by both food professionals and consumers. Food technologies are not neutral. They inform and shape the behaviour of people. This paper presents a theoretical framework for analysing the mediating role of food technology and its influ...

  6. Green technology in Taiwan

    International Nuclear Information System (INIS)

    Runderkamp, D.

    2010-01-01

    Taiwan is striving for leadership in the field of green Technologies. Solar cells and Light Emitting Diodes (LED) are the best examples of successful Taiwanese green technologies. Electronic vehicles and smart grids are giving new impetus to the Taiwanese export of high-quality technology. [nl

  7. From Information Technologies to Knowledge Technologies?

    OpenAIRE

    Auzelle, Jean-Philippe; Mayer, Frédérique; Lhoste, Pascal

    2006-01-01

    In spite of the large variety of technological means available today to obtain and share knowledge needed by the progress of our Society, the relation between the knowledge produced and the knowledge required is not sufficiently facilitated. This paper aims to provide a partial answer to this issue. It proposes a NIAM/ORM formalization of exchanges between producers and users of knowledge. The resulting model is used to analyse and to discuss the deficiencies of the current technologies as we...

  8. Brief: Managing computing technology

    International Nuclear Information System (INIS)

    Startzman, R.A.

    1994-01-01

    While computing is applied widely in the production segment of the petroleum industry, its effective application is the primary goal of computing management. Computing technology has changed significantly since the 1950's, when computers first began to influence petroleum technology. The ability to accomplish traditional tasks faster and more economically probably is the most important effect that computing has had on the industry. While speed and lower cost are important, are they enough? Can computing change the basic functions of the industry? When new computing technology is introduced improperly, it can clash with traditional petroleum technology. This paper examines the role of management in merging these technologies

  9. Applied Semantic Web Technologies

    CERN Document Server

    Sugumaran, Vijayan

    2011-01-01

    The rapid advancement of semantic web technologies, along with the fact that they are at various levels of maturity, has left many practitioners confused about the current state of these technologies. Focusing on the most mature technologies, Applied Semantic Web Technologies integrates theory with case studies to illustrate the history, current state, and future direction of the semantic web. It maintains an emphasis on real-world applications and examines the technical and practical issues related to the use of semantic technologies in intelligent information management. The book starts with

  10. Transferring Technology to Industry

    Science.gov (United States)

    Wolfenbarger, J. Ken

    2006-01-01

    This slide presentation reviews the technology transfer processes in which JPL has been involved to assist in transferring the technology derived from aerospace research and development to industry. California Institute of Technology (CalTech), the organization that runs JPL, is the leading institute in patents for all U.S. universities. There are several mechanisms that are available to JPL to inform industry of these technological advances: (1) a dedicated organization at JPL, National Space Technology Applications (NSTA), (2) Tech Brief Magazine, (3) Spinoff magazine, and (4) JPL publications. There have also been many start-up organizations and businesses from CalTech.

  11. Incubation of NASA technology

    Science.gov (United States)

    Olson, Richard

    1996-03-01

    Traditionally, government agencies have sought to transfer technology by licensing to large corporations. An alternative route to commercialization is through the entrepreneurial process: using government technology to assist new businesses in the environment of a business incubator. The NASA Ames Technology Commercialization Center, in Sunnyvale, California, is a business incubator used to commercialize NASA technology. In operation almost two years, it has helped twenty new, high technology ventures. Ice Management Systems is one of these. The Center is funded by NASA and operated by IC2, a think-tank associated with the University of Texas at Austin.

  12. Encouraging environmentally strategic technologies

    International Nuclear Information System (INIS)

    Heaton, G.R.

    1994-01-01

    Having moved beyond its initial absorption with controlling new technology, environmental policy today must focus more strongly on promoting the development and adoption of new technologies. World Resource Institute's (WRI) ongoing study of 'environmentally strategic technology' is addressed to this fundamental policy issue. The study proposes criteria for identifying such technology, offers a specific list, suggests the kinds of public policy changes necessary to encourage their development and finally presents a comparison of critical technology lists (from the White House, the European Community, Japan and the US Department of Defense). (TEC)

  13. Better Learning Through Technology

    Science.gov (United States)

    Mathieu, R. D.; National InstituteScience Education, College Level-One Team

    2000-12-01

    The Learning Through Technology (LT2) resource is designed to help college Science, Mathematics, Engineering and Technology (SMET) instructors: - understand why and how they should use technology-enhanced learning strategies; - shape the powerful emerging technologies into learning tools that better prepare college students for the 21st century; and - provide all their students more experience with, and a better appreciation for, SMET as a living enterprise. The LT2 website includes case studies of learning technology innovations at a variety of post-secondary institutions. Personal narratives of faculty and students cover virtually every logistical, technological, inter-personal, and political issue involved in adapting learning technologies into courses or curricula. The site also includes a wide array of lively first-person vignettes about learning technology experiences from around the country. Frequently Asked Questions is a quick stop for opinions, advice, and bits of wisdom from experienced learning technology users. Finally, the Team is developing user-friendly evaluation resources to help faculty assess the success of learning technologies in improving student learning. The LT2 site is an element of the NISE website "Innovations in SMET Education". This site is intended to help college faculty meet multiple challenging goals including: educating all students to be scientifically literate in a technological society, developing the ranks of future scientists and skilled technicians, and preparing K-12 science and math teachers. The "Innovations in SMET Education" website can be found at www.wcer.wisc.edu/nise/cl1 .

  14. Technology in geriatrics.

    Science.gov (United States)

    Pilotto, Alberto; Boi, Raffaella; Petermans, Jean

    2018-03-13

    Recently, the interest of industry, government agencies and healthcare professionals in technology for aging people has increased. The challenge is whether technology may play a role in enhancing independence and quality of life and in reducing individual and societal costs of caring. Information and communication technologies, i.e. tools aimed at communicating and informing, assistive technologies designed to maintain older peoples' independence and increasing safety, and human-computer interaction technologies for supporting older people with motility and cognitive impairments as humanoid robots, exoskeletons, rehabilitation robots, service robots and companion-type are interdisciplinary topics both in research and in clinical practice. The most promising clinical applications of technologies are housing and safety to guarantee older people remaining in their own homes and communities, mobility and rehabilitation to improve mobility and gait and communication and quality of life by reducing isolation, improve management of medications and transportation. Many factors impair a broad use of technology in older age, including psychosocial and ethical issues, costs and fear of losing human interaction. A substantial lack of appropriate clinical trials to establish the clinical role of technologies to improve physical or cognitive performances and/or quality of life of subjects and their caregivers may suggest that the classical biomedical research model may not be the optimal choice to evaluate technologies in older people. In conclusion, successful technology development requires a great effort in interdisciplinary collaboration to integrate technologies into the existing health and social service systems with the aim to fit into the older adults' everyday life.

  15. Technology Museums in Denmark

    DEFF Research Database (Denmark)

    Søndergaard, Morten Karnøe

    2012-01-01

    within wind power technology. Finally special attention is devoted to the Danish Technological Museum. A museum which is the oldest and most elaborate of all the technology museums. The museum covers virtually every technological breakthrough with any relevance in a Danish section, with a special focus......This article presents an exhibit review of some of the major technology museums in Denmark. First comes an introduction to the Danish museum ”landscape”. Second a total of six museums and their technology focused exhibits are presented. Among the museums are the Fisheries and Maritime Museum...... in Esbjerg, housing one of the most impressive and representative exhibitions on the technology behind the strong Danish maritime sector. Another museum being mentioned is the Energy Museum, which covers the background for some of the major breakthroughs performed in Denmark within this area; particularly...

  16. Technology and Global Change

    Science.gov (United States)

    Grübler, Arnulf

    2003-10-01

    Technology and Global Change describes how technology has shaped society and the environment over the last 200 years. Technology has led us from the farm to the factory to the internet, and its impacts are now global. Technology has eliminated many problems, but has added many others (ranging from urban smog to the ozone hole to global warming). This book is the first to give a comprehensive description of the causes and impacts of technological change and how they relate to global environmental change. Written for specialists and nonspecialists alike, it will be useful for researchers and professors, as a textbook for graduate students, for people engaged in long-term policy planning in industry (strategic planning departments) and government (R & D and technology ministries, environment ministries), for environmental activists (NGOs), and for the wider public interested in history, technology, or environmental issues.

  17. Sensor technology foresight

    DEFF Research Database (Denmark)

    Andersen, Per Dannemand; Jørgensen, Birte Holst; Rasmussen, Birgitte

    2001-01-01

    , robustness, dispensability, and the abilityto be self-calibrating. Future sensors are expected to be integrated systems with multiple applications. The market sectors most influenced by new sensor technology change from topic to topic. But a general conclusion is that health care is the marketsector most......The Sensor Technology Center A/S (STC) in co-operation with Risoe National Laboratory has carried out a sensor technology foresight in order to strengthen a strategic outlook on sensor technology. The technology foresight (with a timeframe of 2000 to2015) has been performed in the period October...... 2000 - September 2001. The conclusions of the sensor technology report are based on 1) a scanning of existing forward looking literature on sensor technology, 2) a number of workshops with Danish andinternational participants and 3) an international survey with 174 respondents. Half of the respondents...

  18. Promoting renewable energy technologies

    International Nuclear Information System (INIS)

    Grenaa Jensen, S.

    2004-06-01

    Technologies using renewable energy sources are receiving increasing interest from both public authorities and power producing companies, mainly because of the environmental advantages they procure in comparison with conventional energy sources. These technologies can be substitution for conventional energy sources and limit damage to the environment. Furthermore, several of the renewable energy technologies satisfy an increasing political goal of self-sufficiency within energy production. The subject of this thesis is promotion of renewable technologies. The primary goal is to increase understanding on how technological development takes place, and establish a theoretical framework that can assist in the construction of policy strategies including instruments for promotion of renewable energy technologies. Technological development is analysed by through quantitative and qualitative methods. (BA)

  19. The Human Technology

    DEFF Research Database (Denmark)

    Fausing, Bent

     Bent Fausing  "The Humane Technology", abstract (for The Two Cultures: Balancing Choices and Effects Oxford University July 20-26, 2008). The paper will investigate the use of technology in everyday aesthetics such as TV-commercials for mobile phones for Nokia, which slogan is, as it is well known......, "Nokia - connecting people". Which function does this technology get in narratives, images, interactions and affects here?      The mobile phone and its digital camera are depicted as being able to make a unique human presence and interaction. The medium, the technology is a necessary helper to get...... towards this very special and lost humanity. Without the technology, no special humanity is the prophecy. This personification or anthropomorphism is important for the branding of new technology. The technology is seen as creating a technotranscendens towards a more qualified humanity, which is in contact...

  20. Technology Empowerment: Security Challenges.

    Energy Technology Data Exchange (ETDEWEB)

    Warren, Drake Edward [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Backus, George A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Wendell [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nelson, Thomas R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Skocypec, Russell D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-03-01

    Technology empowerment” means that innovation is increasingly accessible to ordinary people of limited means. As powerful technologies become more affordable and accessible, and as people are increasingly connected around the world, ordinary people are empowered to participate in the process of innovation and share the fruits of collaborative innovation. This annotated briefing describes technology empowerment and focuses on how empowerment may create challenges to U.S. national security. U.S. defense research as a share of global innovation has dwindled in recent years. With technology empowerment, the role of U.S. defense research is likely to shrink even further while technology empowerment will continue to increase the speed of innovation. To avoid falling too far behind potential technology threats to U.S. national security, U.S. national security institutions will need to adopt many of the tools of technology empowerment.

  1. JPRS Report, Science & Technology, Japan

    Science.gov (United States)

    1988-10-05

    This is Japan Report with Science and Technology. It contains the issues with different topics on biotecnology , defense industry, nuclear engineering, Marine technology, science and technology policy.

  2. Technology transfer 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    This document, Technology Transfer 94, is intended to communicate that there are many opportunities available to US industry and academic institutions to work with DOE and its laboratories and facilities in the vital activity of improving technology transfer to meet national needs. It has seven major sections: Introduction, Technology Transfer Activities, Access to Laboratories and Facilities, Laboratories and Facilities, DOE Office, Technologies, and an Index. Technology Transfer Activities highlights DOE`s recent developments in technology transfer and describes plans for the future. Access to Laboratories and Facilities describes the many avenues for cooperative interaction between DOE laboratories or facilities and industry, academia, and other government agencies. Laboratories and Facilities profiles the DOE laboratories and facilities involved in technology transfer and presents information on their missions, programs, expertise, facilities, and equipment, along with data on whom to contact for additional information on technology transfer. DOE Offices summarizes the major research and development programs within DOE. It also contains information on how to access DOE scientific and technical information. Technologies provides descriptions of some of the new technologies developed at DOE laboratories and facilities.

  3. Technology '90

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    The US Department of Energy (DOE) laboratories have a long history of excellence in performing research and development in a number of areas, including the basic sciences, applied-energy technology, and weapons-related technology. Although technology transfer has always been an element of DOE and laboratory activities, it has received increasing emphasis in recent years as US industrial competitiveness has eroded and efforts have increased to better utilize the research and development resources the laboratories provide. This document, Technology '90, is the latest in a series that is intended to communicate some of the many opportunities available for US industry and universities to work with the DOE and its laboratories in the vital activity of improving technology transfer to meet national needs. Technology '90 is divided into three sections: Overview, Technologies, and Laboratories. The Overview section describes the activities and accomplishments of the DOE research and development program offices. The Technologies section provides descriptions of new technologies developed at the DOE laboratories. The Laboratories section presents information on the missions, programs, and facilities of each laboratory, along with a name and telephone number of a technology transfer contact for additional information. Separate papers were prepared for appropriate sections of this report.

  4. The Ultimate Technology

    DEFF Research Database (Denmark)

    Riis, Søren

    2013-01-01

    One of the most influential philosophers of the 20th century, Martin Heidegger (1889-1976), died prior to the remarkable cloning of the sheep Dolly and before Dr. Venter started his experiments on creating synthetic life, and he never explicitly discussed living technologies. However, by reinterp......One of the most influential philosophers of the 20th century, Martin Heidegger (1889-1976), died prior to the remarkable cloning of the sheep Dolly and before Dr. Venter started his experiments on creating synthetic life, and he never explicitly discussed living technologies. However......, by reinterpreting his notion of "modern technology," this article shows how it is possible to philosophically assess living technologies and to recognize ways in which Heidegger anticipated this phenomenon with his notion of cybernetics. The interpretation elucidates the fundamental process of technology becoming...... living and simultaneously presents living technology as the ultimate technology. The thesis of this article is that living technology is not just one more technology; rather, it is the perfection of technology as understood by Aristotle. Aristotle's thinking is in this way a key example of a profound...

  5. Technology and teen drivers.

    Science.gov (United States)

    Lee, John D

    2007-01-01

    The rapid evolution of computing, communication, and sensor technology is likely to affect young drivers more than others. The distraction potential of infotainment technology stresses the same vulnerabilities that already lead young drivers to crash more frequently than other drivers. Cell phones, text messaging, MP3 players, and other nomadic devices all present a threat because young drivers may lack the spare attentional capacity for vehicle control and the ability to anticipate and manage hazards. Moreover, young drivers are likely to be the first and most aggressive users of new technology. Fortunately, emerging technology can also support safe driving. Electronic stability control, collision avoidance systems, intelligent speed adaptation, and vehicle tracking systems can all help mitigate the threats to young drivers. However, technology alone is unlikely to make young drivers safer. One promising approach to tailoring technology to teen drivers is to extend proven methods for enhancing young driver safety. The success of graduated drivers license programs (GDL) and the impressive safety benefit of supervised driving suggest ways of tailoring technology to the needs of young drivers. To anticipate the effects of technology on teen driving it may be useful to draw an analogy between the effects of passengers and the effects of technology. Technology can act as a teen passenger and undermine safety or it can act as an adult passenger and enhance safety. Rapidly developing technology may have particularly large effects on teen drivers. To maximize the positive effects and minimize the negative effects will require a broad range of industries to work together. Ideally, vehicle manufacturers would work with infotainment providers, insurance companies, and policy makers to craft new technologies so that they accommodate the needs of young drivers. Without such collaboration young drivers will face even greater challenges to their safety as new technologies emerge.

  6. [Earth Science Technology Office's Computational Technologies Project

    Science.gov (United States)

    Fischer, James (Technical Monitor); Merkey, Phillip

    2005-01-01

    This grant supported the effort to characterize the problem domain of the Earth Science Technology Office's Computational Technologies Project, to engage the Beowulf Cluster Computing Community as well as the High Performance Computing Research Community so that we can predict the applicability of said technologies to the scientific community represented by the CT project and formulate long term strategies to provide the computational resources necessary to attain the anticipated scientific objectives of the CT project. Specifically, the goal of the evaluation effort is to use the information gathered over the course of the Round-3 investigations to quantify the trends in scientific expectations, the algorithmic requirements and capabilities of high-performance computers to satisfy this anticipated need.

  7. Technology transfer - the role of AEA Technology

    International Nuclear Information System (INIS)

    Hughes, A.E.; Bullough, R.; Mason, J.P.

    1989-01-01

    This paper concentrates mostly on examples of spin offs which have arisen from the more basic research carried out by the AEA. However, it should not be inferred from this that the only examples of successful technology transfer by the AEA are of a similar, often unforeseen nature. The most outstanding example of technology transfer by the AEA must surely be that achieved through the applied research which has enabled the establishment of a successful civil nuclear power programme in the UK. The natural transfer of technology here, achieved by virtue of the unique bridging position of the AEA with respect to universities and the nuclear industry, means that its success can easily be overlooked; to do so would be a mistake. However, by including spin off examples, we hope to illustrate how the AEA has also succeeded in bridging to more difficult areas where the special relationship which it shares with the nuclear industry is absent. (author)

  8. Water Technology Lecture 1: Introducing Water Technology

    OpenAIRE

    Gray, Nicholas Frederick

    2017-01-01

    This is a full set of PowerPoint lectures for a course in Water Technology currently given at Trinity College, University of Dublin by professor N.F. Gray. The lectures cover all aspects of water and wastewater treatment and are available for use to lecturers or those interested in the subject. The lecture series is to be used in conjunction with the new textbook ?Water Science and Technology? (4th edition) published by CRC Press in 2017. Lecture 1 is an introduction to the water indust...

  9. Technology Matters - When new technology reshape innovation

    DEFF Research Database (Denmark)

    Edwards, Kasper; Pedersen, Jørgen Lindgaard

    2004-01-01

    not to be managed in the sense that aims, instruments and resources are unclear. It is observed that new technology is adopted with a limited scope and fo-cus – often to solve a particular technical problem e.g. the quality of specifica-tion are too low. For a single reason a new technology is introduced within...... observed through these interviews that product configuration systems are being implemented to solve a particular problem only later to become a significant part of business processes. Product configuration systems over time become a central element when innovating new products....

  10. Responsible technology acceptance

    DEFF Research Database (Denmark)

    Toft, Madeleine Broman; Schuitema, Geertje; Thøgersen, John

    2014-01-01

    on private consumers’ acceptance of having Smart Grid technology installed in their home. We analyse acceptance in a combined framework of the Technology Acceptance Model and the Norm Activation Model. We propose that individuals are only likely to accept Smart Grid technology if they assess usefulness......As a response to climate change and the desire to gain independence from imported fossil fuels, there is a pressure to increase the proportion of electricity from renewable sources which is one of the reasons why electricity grids are currently being turned into Smart Grids. In this paper, we focus...... in terms of a positive impact for society and the environment. Therefore, we expect that Smart Grid technology acceptance can be better explained when the well-known technology acceptance parameters included in the Technology Acceptance Model are supplemented by moral norms as suggested by the Norm...

  11. Use of Payment Technology

    DEFF Research Database (Denmark)

    Xiao, Xiao; Hedman, Jonas; Runnemark, Emma

    2015-01-01

    Drawing on the theory of consumption value, this research-in-progress strives to provide a theoretical explanation of payment technology use by investigating the relationship between consumers’ perceptions of different consumption values associated with a certain payment technology and their choice...... to use the technology. We conducted the study in the context of Denmark, a Northern European country, with three well established payment technologies: cash, payment cards, and Internet banking. Following a focus group of identifying and defining four types of consumption values associated with each...... payment technology, a survey was then conducted by a national statistics agency in the country. Preliminary results have shown that different consumption values matter for the use of different payment technologies. The findings will potentially contribute to a better understanding of consumer payment...

  12. Buildings Energy Technology; (USA)

    Energy Technology Data Exchange (ETDEWEB)

    Cason, D.L.; Hicks, S.C. (eds.)

    1991-01-01

    Buildings Energy Technology (BET) announces on a monthly basis the current worldwide information available on the technology required for economic energy conservation in buildings and communities. Each issue of BET also will include an article presenting a program overview or highlighting a current energy conservation technology project of DOE's Office of Building Technologies (OBT) plus a listing of scheduled meetings of interest. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database (EDB) during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency's Energy Technology Data Exchange or government-to-government agreements.

  13. Nuclear technology and beyond

    International Nuclear Information System (INIS)

    Akiyama, Mamoru

    1997-01-01

    After the confrontation of East and West, and the problem of North and South, we are now facing the era of Globalization in the presence of twenty-first century. Tracing the history of civilization, human being has progressed along with the accumulation of experience, and the development of science and technology. Science and technology bloomed in modern ages, especially, energy technology showed the giant leap in this century. Nuclear science and technology has been developed for peaceful purposes, and for the benefit of humanity. As a result, today, its progress led nuclear science and technology to have the great applicability to the development of the society. Toward the twenty-first century and Globalization, the science and technology developed in nuclear field is hoped to play a great contribution in various area of the society. (author)

  14. Everyday Struggels with Technology

    DEFF Research Database (Denmark)

    Mahnke, Martina; Schwartz, Sander Andreas

    2017-01-01

    Technology has not only become an integral part of people’s lives but also of people’s everyday struggles. Struggles with technology are complex in nature; we tend to not only struggle with their basic functions but also with how they make us feel. During the course of our life we tend to master...... and struggle with technology in different ways. This struggle has been studied in relation to media literacy (Livingstone, 2004), to domestication theory (Silverstone et al. 1992), or in everyday life (Bakardjieva, 2005). This work enhances these lines of studies by exploring everyday struggles with technology...... from a life stage (Erikson, 1959) point of view. In particular, we explore what are common struggles people have with technology and what are distinct struggles in relation to life stages. In conclusion, we will present our findings by outlining what we call ‘technological biographies’. Those...

  15. Emerging and Disruptive Technologies.

    Science.gov (United States)

    Kricka, Larry J

    2016-08-01

    Several emerging or disruptive technologies can be identified that might, at some point in the future, displace established laboratory medicine technologies and practices. These include increased automation in the form of robots, 3-D printing, technology convergence (e.g., plug-in glucose meters for smart phones), new point-of-care technologies (e.g., contact lenses with sensors, digital and wireless enabled pregnancy tests) and testing locations (e.g., Retail Health Clinics, new at-home testing formats), new types of specimens (e.g., cell free DNA), big biology/data (e.g., million genome projects), and new regulations (e.g., for laboratory developed tests). In addition, there are many emerging technologies (e.g., planar arrays, mass spectrometry) that might find even broader application in the future and therefore also disrupt current practice. One interesting source of disruptive technology may prove to be the Qualcomm Tricorder XPrize, currently in its final stages.

  16. NAND flash memory technologies

    CERN Document Server

    Aritome, Seiichi

    2016-01-01

    This book discusses basic and advanced NAND flash memory technologies, including the principle of NAND flash, memory cell technologies, multi-bits cell technologies, scaling challenges of memory cell, reliability, and 3-dimensional cell as the future technology. Chapter 1 describes the background and early history of NAND flash. The basic device structures and operations are described in Chapter 2. Next, the author discusses the memory cell technologies focused on scaling in Chapter 3, and introduces the advanced operations for multi-level cells in Chapter 4. The physical limitations for scaling are examined in Chapter 5, and Chapter 6 describes the reliability of NAND flash memory. Chapter 7 examines 3-dimensional (3D) NAND flash memory cells and discusses the pros and cons in structure, process, operations, scalability, and performance. In Chapter 8, challenges of 3D NAND flash memory are dis ussed. Finally, in Chapter 9, the author summarizes and describes the prospect of technologies and market for the fu...

  17. Technological Capability's Predictor Variables

    Directory of Open Access Journals (Sweden)

    Fernanda Maciel Reichert

    2011-03-01

    Full Text Available The aim of this study was to identify the factors that influence in configuration of the technological capability of companies in sectors with medium-low technological intensity. To achieve the goal proposed in this article a survey was carried out. Based on the framework developed by Lall (1992 which classifies firms in basic, intermediate and advanced level of technological capability; it was found that the predominant technological capability is intermediate, with 83.7% of respondent companies (plastics companies in Brazil. It is believed that the main contribution of this study is the finding that the dependent variable named “Technological Capability” can be explained at a rate of 65% by six variables: development of new processes; selection of the best equipment supplier; sales of internally developed new technology to third parties; design and manufacture of equipment; study of the work methods and perform inventory control; and improvement of product quality.

  18. Technology Transfer and Commercialization

    Science.gov (United States)

    Martin, Katherine; Chapman, Diane; Giffith, Melanie; Molnar, Darwin

    2001-01-01

    During concurrent sessions for Materials and Structures for High Performance and Emissions Reduction, the UEET Intellectual Property Officer and the Technology Commercialization Specialist will discuss the UEET Technology Transfer and Commercialization goals and efforts. This will include a review of the Technology Commercialization Plan for UEET and what UEET personnel are asked to do to further the goals of the Plan. The major goal of the Plan is to define methods for how UEET assets can best be infused into industry. The National Technology Transfer Center will conduct a summary of its efforts in assessing UEET technologies in the areas of materials and emissions reduction for commercial potential. NTTC is assisting us in completing an inventory and prioritization by commercialization potential. This will result in increased exposure of UEET capabilities to the private sector. The session will include audience solicitation of additional commercializable technologies.

  19. Technology transfer packages

    International Nuclear Information System (INIS)

    Mizon, G.A.; Bleasdale, P.A.

    1994-01-01

    Nuclear power is firmly established in many developed countries'energy policies and is being adopted by emerging nations as an attractive way of gaining energy self sufficiency. The early users of nuclear power had to develop the technology that they needed, which now, through increasing world wide experience, has been rationalised to meet demanding economic and environmental pressures. These justifiable pressures, can lead to existing suppliers of nuclear services to consider changing to more appropriate technologies and for new suppliers to consider licensing proven technology rather then incurring the cost of developing new alternatives. The transfer of technology, under license, is made more straight forward if the owner conveniently groups appropriate technology into packages. This paper gives examples of 'Technology Packages' and suggests criteria for the specification, selection and contractual requirements to ensure successful licensing

  20. Promoting renewable energy technologies

    DEFF Research Database (Denmark)

    Olsen, O.J.; Skytte, K.

    2004-01-01

    % of its annual electricity production. In this paper, we present and discuss the Danish experience as a case of promoting renewable energy technologies. The development path of the two technologies has been very different. Wind power is considered an outright success with fast deployment to decreasing...... technology and its particular context, it is possible to formulate some general principles that can help to create an effective and efficient policy for promoting new renewable energy technologies.......Wind power and combined heat and power (CHP) using biomass (for combustion, gasification or fermentation) are two of the most promising renewable technologies for generation of electricity. Denmark has a long and well-established tradition for these technologies that now account for approx. 25...

  1. Information Technology Resources Assessment

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    The Information Technology Resources Assessment (ITRA) is being published as a companion document to the Department of Energy (DOE) FY 1994--FY 1998 Information Resources Management Long-Range Plan. This document represents a collaborative effort between the Office of Information Resources Management and the Office of Energy Research that was undertaken to achieve, in part, the Technology Strategic Objective of IRM Vision 21. An integral part of this objective, technology forecasting provides an understanding of the information technology horizon and presents a perspective and focus on technologies of particular interest to DOE program activities. Specifically, this document provides site planners with an overview of the status and use of new information technology for their planning consideration.

  2. Trends in Technology Use

    OpenAIRE

    Florin Frant

    2009-01-01

    This study aims to investigate the relationship between the use of technology, working conditions and the health and well-being of workers in Europe. As it is known that characteristics of work organisation may reinforce or impair both positive and negative effects of technology use, the role of these characteristics is also considered in this study. The research will provide an insight into the trends and changes in technology use and working conditions in European count...

  3. Digital Sensor Technology

    Energy Technology Data Exchange (ETDEWEB)

    Ted Quinn; Jerry Mauck; Richard Bockhorst; Ken Thomas

    2013-07-01

    The nuclear industry has been slow to incorporate digital sensor technology into nuclear plant designs due to concerns with digital qualification issues. However, the benefits of digital sensor technology for nuclear plant instrumentation are substantial in terms of accuracy, reliability, availability, and maintainability. This report demonstrates these benefits in direct comparisons of digital and analog sensor applications. It also addresses the qualification issues that must be addressed in the application of digital sensor technology.

  4. Semiotic technology and practice

    DEFF Research Database (Denmark)

    Zhao, Sumin; Djonov, Emilia; van Leeuwen, Theo

    2014-01-01

    for discourse analysis and social semiotic research, focusing especially on the need to step away from the notion of text and to develop a holistic, non-logocentric, and adaptive multimodal approach to researching semiotic technologies. Using PowerPoint as a case study, this article takes a step toward...... developing a social semiotic multimodal theory of the relation between semiotic technologies, or technologies for making meaning, and semiotic practices....

  5. RFID TECHNOLOGY: AN OVERVIEW

    OpenAIRE

    Amit Kumar Pal; Akanksha Tripathi; Anupam Saigal

    2017-01-01

    The information technology has changed the way library professional to interact, communicate, share and acquire knowledge. However, when the computer was created it did not have features and facilities for users to interact. With the evaluation of Internet and Communication Technology, manual library has evolved into a dynamic, interactive and collaborative platform that facilitates exchange of knowledge and information among its users. RFID is the latest technology to be used in libraries an...

  6. Blink frequency and duration during perimetry and their relationship to test-retest threshold variability.

    Science.gov (United States)

    Wang, Yanfang; Toor, Sonia S; Gautam, Ramesh; Henson, David B

    2011-06-28

    To describe different patterns of blinking in patients undergoing a visual field test and to establish whether the blink parameters are related to threshold variability. Thirty-nine patients with diagnosed or suspected glaucoma were recruited to undertake a perimetric task twice. Blinks were detected with a video eye-tracker system that records at a sampling rate of 60 Hz. Blink frequency, duration, and episodes of microsleep (eye closures >500 ms) were analyzed, and correlated with test-retest threshold variability. The timing of blinks with respect to stimulus presentation was analyzed and the percentage of seen stimuli for all presentations (POS(overall)) and those overlapped with blinks (POS(overlapped)) were compared. Blink frequency ranged from 0 to 58 per minute. A significant increase in blink frequency was observed in the second test (P POS(overall) and POS(overlapped) was significant (P POS(overlapped) was observed with the increase of overlap duration. A wide range of blink frequencies was observed during perimetric testing. Although no blink parameters showed significant influence on threshold variability, when the blinks overlapped with a stimulus presentation, the probability of seeing was reduced. For suprathreshold stimuli, blinks often occurred after the presentation, whereas for subthreshold presentations, there was no relationship to presentation time.

  7. Influence of Multifocal Intraocular Lenses on Standard Automated Perimetry Test Results

    NARCIS (Netherlands)

    Aychoua, Nancy; Montolio, Francisco G. Junoy; Jansonius, Nomdo M.

    Importance: A multifocal intraocular lens (MFIOL) allows for spectacle independence after cataract surgery and is thus a seemingly attractive option. However, several optical limitations have been reported or can be hypothesized. Objective: To evaluate the influence of an MFIOL on standard automated

  8. Health care technology assessment

    Science.gov (United States)

    Goodman, Clifford

    1994-12-01

    The role of technology in the cost of health care is a primary issue in current debates concerning national health care reform. The broad scope of studies for understanding technological impacts is known as technology assessment. Technology policy makers can improve their decision making by becoming more aware, and taking greater advantage, of key trends in health care technology assessment (HCTA). HCTA is the systematic evaluation of the properties, impacts, and other attributes of health care technologies, including: technical performance; clinical safety and efficacy/effectiveness; cost-effectiveness and other economic attributes; appropriate circumstances/indications for use; and social, legal, ethical, and political impacts. The main purpose of HCTA is to inform technology-related policy making in health care. Among the important trends in HCTA are: (1) proliferation of HCTA groups in the public and private sectors; (2) higher standards for scientific evidence concerning technologies; (3) methodological development in cost analyses, health-related quality of life measurement, and consolidation of available scientific evidence (e.g., meta-analysis); (4) emphasis on improved data on how well technologies work in routine practice and for traditionally under-represented patient groups; (5) development of priority-setting methods; (6) greater reliance on medical informatics to support and disseminate HCTA findings.

  9. Technology Roadmaps: Cement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    To support its roadmap work focusing on key technologies for emissions reductions, the International Energy Agency (IEA) also investigated one particular industry: cement. Cement production includes technologies that are both specific to this industry and those that are shared with other industries (e.g., grinding, fuel preparation, combustion, crushing, transport). An industry specific roadmap provides an effective mechanism to bring together several technology options. It outlines the potential for technological advancement for emissions reductions in one industry, as well as potential cross-industry collaboration.

  10. Explosive Technology Group

    Data.gov (United States)

    Federal Laboratory Consortium — The Explosive Technology Group (ETG) provides diverse technical expertise and an agile, integrated approach to solve complex challenges for all classes of energetic...

  11. Mixed plastics recycling technology

    CERN Document Server

    Hegberg, Bruce

    1995-01-01

    Presents an overview of mixed plastics recycling technology. In addition, it characterizes mixed plastics wastes and describes collection methods, costs, and markets for reprocessed plastics products.

  12. Technology Education in Japan.

    Science.gov (United States)

    Murata, Shoji; Stern, Sam

    1993-01-01

    Describes the history, current status, and future direction of technology education in Japan, including the process of curriculum transition, secondary and postsecondary structure, and lack of resources. (SK)

  13. Distributed Energy Technology Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Distributed Energy Technologies Laboratory (DETL) is an extension of the power electronics testing capabilities of the Photovoltaic System Evaluation Laboratory...

  14. Extending Database Integration Technology

    National Research Council Canada - National Science Library

    Buneman, Peter

    1999-01-01

    Formal approaches to the semantics of databases and database languages can have immediate and practical consequences in extending database integration technologies to include a vastly greater range...

  15. Advanced Surface Technology

    DEFF Research Database (Denmark)

    Møller, Per; Nielsen, Lars Pleht

    , nitriding, carbonitriding, and many other lesser-known thermochemical processes used for solving technological problems. The book is richly illustrated with pictures and figures showing how the technology creates new innovative solutions for industry and how surfaces are becoming integral to the function......This new significant book on advanced modern surface technology in all its variations, is aimed at both teaching at engineering schools and practical application in industry. The work covers all the significant aspects of modern surface technology and also describes how new advanced techniques make...

  16. Networked Constellation Communications Technologies

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop communications architectures and enabling technologies for mission concepts relying on multiple spatially distributed spacecraft to perform coordinated...

  17. Irradiation technology - industrial use

    International Nuclear Information System (INIS)

    Zyball, A.

    1995-01-01

    The most important applications of the radiation technology are the crosslinking of polymers and sterilisation. Although extensive experience about the use of this technology is available and powerful and dependable radiation facilities can be obtained, as yet the radiation technology has not found the acceptance it deserves in the industry. The main reason therefore has to do with how the question of radiation or the term radiation is presented to the industry and among the population. This paper will deal with considerations and ways in which the industrial use of the radiation technology can be expanded. (author)

  18. Acoustic Technology Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — This laboratory contains an electro-magnetic worldwide data collection and field measurement capability in the area of acoustic technology. Outfitted by NASA Langley...

  19. Solar Cooker Technological Change

    DEFF Research Database (Denmark)

    Ahmad, Bashir

    1997-01-01

    The challenges which solar cooking technology is facing right now is discussed. Based on a field study in Madras and Gujarat, it is asserted that there is an important incompatibility between the technology and the every day real-life conditions of the "users" of solar cooker. An evaluation report...... on a solar cooker technology in Burkina Faso supports the findings of the study. It is concluded that the users and other important actors have to be incorporated in the technological development process of solar cookers in the future....

  20. Future Information Technology

    CERN Document Server

    Stojmenovic, Ivan; Choi, Min; Xhafa, Fatos; FutureTech 2013

    2014-01-01

    Future technology information technology stands for all of continuously evolving and converging information technologies, including digital convergence, multimedia convergence, intelligent applications, embedded systems, mobile and wireless communications, bio-inspired computing, grid and cloud computing, semantic web, user experience and HCI, security and trust computing and so on, for satisfying our ever-changing needs. In past twenty five years or so, Information Technology (IT) influenced and changed every aspect of our lives and our cultures. These proceedings foster the dissemination of state-of-the-art research in all future IT areas, including their models, services, and novel applications associated with their utilization.

  1. Advanced Optical Fuzing Technology

    National Research Council Canada - National Science Library

    Lippe, Christian M. von der; Liu, J. J; Aliberti, Keith; Dang, Gerard; Chang, Wayne; Shen, Paul; Simonis, George

    2004-01-01

    .... The photonic component development exploits pioneering work and unique expertise at ARDEC, ARL, and Sandia National Laboratories by combining key optoelectronic technologies to design and demonstrate...

  2. Moralizing Food Technology

    DEFF Research Database (Denmark)

    Coff, Christian Eyde

    2015-01-01

    Food technologies are common on many levels in society and used by both food professionals and consumers. Food technologies are not neutral. They inform and shape the behaviour of people. This paper presents a theoretical framework for analysing the mediating role of food technology and its...... influence on food ethics. Post-phenomenology and the idea of a technologically mediated morality are central theoretical approaches. Four elements are included in the analytical framework: perception, interpretation, intentionality, and mediated morality. The framework is applied to two cases; food safety...

  3. Application Technology Research Unit

    Data.gov (United States)

    Federal Laboratory Consortium — To conduct fundamental and developmental research on new and improved application technologies to protect floricultural, nursery, landscape, turf, horticultural, and...

  4. Advanced Surface Technology

    DEFF Research Database (Denmark)

    Møller, Per; Nielsen, Lars Pleht

    This new significant book on advanced modern surface technology in all its variations, is aimed at both teaching at engineering schools and practical application in industry. The work covers all the significant aspects of modern surface technology and also describes how new advanced techniques make......, nitriding, carbonitriding, and many other lesser-known thermochemical processes used for solving technological problems. The book is richly illustrated with pictures and figures showing how the technology creates new innovative solutions for industry and how surfaces are becoming integral to the function...

  5. Traditions of technology

    Energy Technology Data Exchange (ETDEWEB)

    Nandy, A.

    1979-01-01

    Modern technology, with about 300 years of history behind it, has become the dominant tradition by marginalizing the other traditions of technology in the West and in the rest of the world. Important roles have been played in this marginalization by the ideology of Englightenment, by the Industrial Revolution, and nineteenth and twentieth century colonialism. They have blurred the difference between science and technology, underwritten the mechanomorphic world-image and promoted the concept of a value-free, ethically unrestrained technology. However, the present crises of technological consciousness has brought to the fore alternative traditions of technology, not as ethnotechnologies from which a universal, secular, modern technology can draw lessons, but as a competing philosophies of universality which can provide correctives to the alienating, exploitative, and dehumanizing role of modern science and technology. An alternative ideology of science is needed for this as well as a new legitimacy for the traditional technosystems and their cultural environments. Such a legitimacy will have to be based on a different set of values relating to the man--nature and man--man relationships and a deeper understanding of the politics of technology in its cross-national and cross-cultural contexts.

  6. Robotics Technology Crosscutting Program. Technology summary

    International Nuclear Information System (INIS)

    1995-06-01

    The Robotics Technology Development Program (RTDP) is a needs-driven effort. A length series of presentations and discussions at DOE sites considered critical to DOE's Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the resulting robotics needs assessment revealed several common threads running through the sites: Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination and Dismantlement (D and D). The RTDP Group also realized that some of the technology development in these four areas had common (Cross Cutting-CC) needs, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT and E) process urged an additional organizational breakdown between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). These factors lead to the formation of the fifth application area for Crosscutting and Advanced Technology (CC and AT) development. The RTDP is thus organized around these application areas -- TWR, CAA, MWO, D and D, and CC and AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas

  7. Testing Technology: A Sandia technology bulletin

    Energy Technology Data Exchange (ETDEWEB)

    Goetsch, B.; Floyd, H.L.; Doran, L. [eds.

    1994-08-01

    Inside this issue is a farewell to Testing Technology message from technical advisor, Ruth David. Also included are articles on: Testing the I-40 bridge over the Rio Grande, simulated reactor meltdown studies, an inexpensive monitor for testing integrated circuits, testing of antihelicoptor mines, and quality assurance on aircraft inspection.

  8. The Next Technology Revolution - Nano Electronic Technology

    Science.gov (United States)

    Turlik, Iwona

    2004-03-01

    Nanotechnology is a revolutionary engine that will engender enormous changes in a vast majority of today's industries and markets, while potentially creating whole new industries. The impact of nanotechnology is particularly significant in the electronics industry, which is constantly driven by the need for higher performance, increased functionality, smaller size and lower cost. Nanotechnology can influence many of the hundreds of components that are typically assembled to manufacture modern electronic devices. Motorola manufactures electronics for a wide range of industries and communication products. In this presentation, the typical components of a cellular phone are outlined and technology requirements for future products, the customer benefits, and the potential impact of nanotechnology on many of the components are discussed. Technology needs include reliable materials supply, processes for high volume production, experimental and simulation tools, etc. For example, even routine procedures such as failure characterization may require the development of new tools for investigating nano-scale phenomena. Business needs include the development of an effective, high volume supply chain for nano-materials and devices, disruptive product platforms, and visible performance impact on the end consumer. An equally significant long-term industry need is the availability of science and engineering graduates with a multidisciplinary focus and a deep understanding of the fundamentals of nano-technology, that can harness the technology to create revolutionary products.

  9. Technology Transfer and Technology Transfer Intermediaries

    Science.gov (United States)

    Bauer, Stephen M.; Flagg, Jennifer L.

    2010-01-01

    A standard and comprehensive model is needed to evaluate and compare technology transfer systems and the stakeholders within these systems. The principle systems considered include federal laboratories, U.S. universities, the rehabilitation engineering research centers (RERCs), and large small business innovation research programs. An earlier…

  10. Technology Applications Team: Applications of aerospace technology

    Science.gov (United States)

    1993-01-01

    Highlights of the Research Triangle Institute (RTI) Applications Team activities over the past quarter are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. The authors gratefully acknowledge the contributions of many individuals to the RTI Technology Applications Team program. The time and effort contributed by managers, engineers, and scientists throughout NASA were essential to program success. Most important to the program has been a productive working relationship with the NASA Field Center Technology Utilization (TU) Offices. The RTI Team continues to strive for improved effectiveness as a resource to these offices. Industry managers, technical staff, medical researchers, and clinicians have been cooperative and open in their participation. The RTI Team looks forward to continuing expansion of its interaction with U.S. industry to facilitate the transfer of aerospace technology to the private sector.

  11. Digital Actuator Technology

    Energy Technology Data Exchange (ETDEWEB)

    Ken Thomas; Ted Quinn; Jerry Mauck; Richard Bockhorst

    2014-09-01

    There are significant developments underway in new types of actuators for power plant active components. Many of these make use of digital technology to provide a wide array of benefits in performance of the actuators and in reduced burden to maintain them. These new product offerings have gained considerable acceptance in use in process plants. In addition, they have been used in conventional power generation very successfully. This technology has been proven to deliver the benefits promised and substantiate the claims of improved performance. The nuclear industry has been reluctant to incorporate digital actuator technology into nuclear plant designs due to concerns due to a number of concerns. These could be summarized as cost, regulatory uncertainty, and a certain comfort factor with legacy analog technology. The replacement opportunity for these types of components represents a decision point for whether to invest in more modern technology that would provide superior operational and maintenance benefits. Yet, the application of digital technology has been problematic for the nuclear industry, due to qualification and regulatory issues. With some notable exceptions, the result has been a continuing reluctance to undertake the risks and uncertainties of implementing digital actuator technology when replacement opportunities present themselves. Rather, utilities would typically prefer to accept the performance limitations of the legacy analog actuator technologies to avoid impacts to project costs and schedules. The purpose of this report is to demonstrate that the benefits of digital actuator technology can be significant in terms of plant performance and that it is worthwhile to address the barriers currently holding back the widespread development and use of this technology. It addresses two important objectives in pursuit of the beneficial use of digital actuator technology for nuclear power plants: 1. To demonstrate the benefits of digital actuator

  12. Technology Catalogue. First edition

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    The Department of Energy`s Office of Environmental Restoration and Waste Management (EM) is responsible for remediating its contaminated sites and managing its waste inventory in a safe and efficient manner. EM`s Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste management programs within EM`s Office of Environmental Restoration and Office of Waste Management. The purpose of the Technology Catalogue is to provide performance data on OTD-developed technologies to scientists and engineers assessing and recommending technical solutions within the Department`s clean-up and waste management programs, as well as to industry, other federal and state agencies, and the academic community. OTD`s applied research and demonstration activities are conducted in programs referred to as Integrated Demonstrations (IDs) and Integrated Programs (IPs). The IDs test and evaluate.systems, consisting of coupled technologies, at specific sites to address generic problems, such as the sensing, treatment, and disposal of buried waste containers. The IPs support applied research activities in specific applications areas, such as in situ remediation, efficient separations processes, and site characterization. The Technology Catalogue is a means for communicating the status. of the development of these innovative technologies. The FY93 Technology Catalogue features technologies successfully demonstrated in the field through IDs and sufficiently mature to be used in the near-term. Technologies from the following IDs are featured in the FY93 Technology Catalogue: Buried Waste ID (Idaho National Engineering Laboratory, Idaho); Mixed Waste Landfill ID (Sandia National Laboratories, New Mexico); Underground Storage Tank ID (Hanford, Washington); Volatile organic compound (VOC) Arid ID (Richland, Washington); and VOC Non-Arid ID (Savannah River Site, South Carolina).

  13. Assessing Teacher Technology Skills.

    Science.gov (United States)

    Anderson, Mary Alice

    2000-01-01

    Advocates the assessment of teachers' technology skills by school media and technology specialists who are involved in staff training. Discusses what should be assessed, including level of curricular integration and attitudes; assessment objectives; informal assessments; formal assessments; assessment tools; and administrators as role models for…

  14. Managing Technology Projects

    Science.gov (United States)

    Booth, Char

    2009-01-01

    This will be my first time authoring this column, and I'm delighted to have the opportunity it presents to explore the intersection of library technology and public services. As the recent title of the 2008 Internet Librarian conference indicates, "Beyond Library 2.0: User-Focused Tools and Technologies," the tide of what for several years has…

  15. Computers: Educational Technology Paradox?

    Science.gov (United States)

    Hashim, Hajah Rugayah Hj.; Mustapha, Wan Narita

    2005-01-01

    As we move further into the new millennium, the need to involve and adapt learners with new technology have been the main aim of many institutions of higher learning in Malaysia. The involvement of the government in huge technology-based projects like the Multimedia Super Corridor Highway (MSC) and one of its flagships, the Smart Schools have…

  16. New technologies in contraception

    OpenAIRE

    Rowlands, Sam

    2009-01-01

    New technologies in both reversible contraception and sterilisation are described. The review includes recent advances in the development of oral contraception, emergency contraception, injectable contraception, vaginal rings, subdermal implants, transdermal contraception, intrauterine devices, spermicides and barrier methods. It also covers methods of transcervical female sterilisation and more easily reversible male sterilisation. The emphasis is on the technology and its safety and effecti...

  17. Resources in Technology 7.

    Science.gov (United States)

    International Technology Education Association, Reston, VA.

    This volume of Resources in Technology contains the following eight instructional modules: (1) "Processing Technology"; (2) "Water--A Magic Resource"; (3) "Hazardous Waste Disposal--The NIMBY (Not in My Backyard) Syndrome"; (4) "Processing Fibers and Fabrics"; (5) "Robotics--An Emerging…

  18. School Security Technologies

    Science.gov (United States)

    Schneider, Tod

    2010-01-01

    Over the past decade electronic security technology has evolved from an exotic possibility into an essential safety consideration. Before resorting to high-tech security solutions, school officials should think carefully about the potential for unintended consequences. Technological fixes may be mismatched to the problems being addressed. They can…

  19. Botswana Journal of Technology

    African Journals Online (AJOL)

    Botswana Journal of Technology describes original developments or research in the field of Engineering and Technology. It is published twice a year. Vol 22, No 1 (2013). DOWNLOAD FULL TEXT Open Access DOWNLOAD FULL TEXT Subscription or Fee Access. Table of Contents. Articles. Urbanisation, infrastructure ...

  20. Educational Technology: Integration?

    Science.gov (United States)

    Christensen, Dean L.; Tennyson, Robert D.

    This paper presents a perspective of the current state of technology-assisted instruction integrating computer language, artificial intelligence (AI), and a review of cognitive science applied to instruction. The following topics are briefly discussed: (1) the language of instructional technology, i.e., programming languages, including authoring…

  1. Technology and Teaching Philosophy

    Science.gov (United States)

    King, Paul C.

    2012-01-01

    This article discusses the challenges faced when integrating new technologies into the classroom. Viewing the experiences of teaching a first year learning community through the lens of the principles of the Reflective Teaching Portfolio, the author looks to answer the question: "How should Technology relate to our Teaching Philosophy?"…

  2. CSIR Technology Impact 1998

    CSIR Research Space (South Africa)

    CSIR

    1998-01-01

    Full Text Available stream_source_info CSIR Technology Impact 1998.pdf.txt stream_content_type text/plain stream_size 23 Content-Encoding ISO-8859-1 stream_name CSIR Technology Impact 1998.pdf.txt Content-Type text/plain; charset=ISO-8859-1 ...

  3. Technology and Educational Structure

    Science.gov (United States)

    Boocock, Sarane S.

    2012-01-01

    Most current debate on instructional technology is characterized either by grandiose speculation on the salvation of education through automation (without specification of "what" and "how" technological innovations will actually be introduced in specific classroom situations, and how the changes will be financed), or by jargon-filled hairsplitting…

  4. US blanket technology programs

    International Nuclear Information System (INIS)

    Nygren, R.E.

    1985-01-01

    Experimental research in US programs related to blanket technology is described through brief summaries of the objectives, facilities, recent experimental results and principal investigators for the Blanket Technology Program, TRIO-1 Experiment, TSTA, Fusion Hybrid Program and selected activities in the Fusion Materials and Fusion Safety Programs in neutronics research

  5. Advanced Mirror Technology Development

    Science.gov (United States)

    Stahl, H. Philip

    2017-01-01

    The Advanced Mirror Technology Development (AMTD) project matures critical technologies required to enable ultra-stable 4-m-or-larger monolithic or segmented ultraviolet, optical, and infrared (UVOIR) space telescope primary-mirror assemblies for general astrophysics and ultra-high-contrast observations of exoplanets.

  6. Learning Languages through Technology

    Science.gov (United States)

    Hanson-Smith, Elizabeth, Ed.; Rilling, Sarah, Ed.

    2007-01-01

    While posing important questions about how learning proceeds with new technologies, this volume demonstrates how teachers captivate the imagination of learners, from schoolchildren to postgraduates, by providing real-world purposes for language. The authors are from educational institutions in many regions of the world, and describe technology use…

  7. JOURNAL OF LANGUAGE, TECHNOLOGY ...

    African Journals Online (AJOL)

    Frederick Iraki

    It is also claimed that with modern technology, the tendency toward enjoying computer systems in education has also increased and it has affected the way of learning. EFL points in EFL classes. It is believed that the computer and also information technology was introduced in language laboratories to improve the learners' ...

  8. More Technology, Less Learning?

    Science.gov (United States)

    Kulesza, Justin; DeHondt, Gerald, II.; Nezlek, George

    2011-01-01

    Modern information technologies (presentation software, wireless laptop computers, cell phones, etc.) are purported to enhance student learning. Research to date provides an ambivalent and often conflicting set of outcomes about the effectiveness of such technologies in the context of the college classroom. Anecdotal evidence further complicates…

  9. IT Department Technology Transfer

    CERN Multimedia

    Birker, D

    2004-01-01

    The objective of Technology Transfer (TT) at CERN is “to make known and available to third parties under agreed conditions, technical developments achieved in fulfi lling the laboratory’s mission in fundamental research”. The IT Department contributes to this objective by the transfer of technology, expertise and know-how to industry, universities, public institutions and the society at large.

  10. Science and Technology Policy

    DEFF Research Database (Denmark)

    Baark, Erik

    1996-01-01

    This paper examines the status of science and technology in Mongolia, and discusses the policy issues which have emerged with the transition to market economy in recent years.......This paper examines the status of science and technology in Mongolia, and discusses the policy issues which have emerged with the transition to market economy in recent years....

  11. Riding the Technology Wave.

    Science.gov (United States)

    Malan, Pierre

    This paper presents an overview of information technology development. The first section sets the scene, comparing the first WAN (Wide Area Network) and Intel processor to current technology. The birth of the microcomputer is described in the second section, including historical background on semiconductors, microprocessors, and the microcomputer.…

  12. Graphite technology development plan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1986-07-01

    This document presents the plan for the graphite technology development required to support the design of the 350 MW(t) Modular HTGR within the US National Gas-Cooled Reactor Program. Besides descriptions of the required technology development, cost estimates, and schedules, the plan also includes the associated design functions and design requirements.

  13. Technologies for life

    International Nuclear Information System (INIS)

    Kerner, J.

    2006-01-01

    In this video-film technologies applied in the BIONT, a. s. are presented. Production of radionuclides and radiopharmaceuticals as well as principles of positron emission tomography and diagnostic using is explained. Other technologies implemented and planned in the Cyclotron Center of the Slovak Republic are presented.

  14. Church - Technology - Nuclear Power

    International Nuclear Information System (INIS)

    May, H.

    1982-01-01

    In order to cope with the problems causing a great deal of trouble today, i.e. with fear and with the ethical substantiation of technology, the author considers an integration model necessary which is to link science and technology and religion and philosophy. (RW) [de

  15. Assistive Technologies for Reading

    Science.gov (United States)

    Ruffin, Tiece M.

    2012-01-01

    Twenty-first century teachers working with diverse readers are often faced with the question of how to integrate technology in reading instruction that meets the needs of the techno-generation. Are today's teachers equipped with the knowledge of how to effectively use Assistive Technologies (AT) for reading? This position paper discusses AT for…

  16. VENTILATION TECHNOLOGY SYSTEMS ANALYSIS

    Science.gov (United States)

    The report gives results of a project to develop a systems analysis of ventilation technology and provide a state-of-the-art assessment of ventilation and indoor air quality (IAQ) research needs. (NOTE: Ventilation technology is defined as the hardware necessary to bring outdoor ...

  17. A Technology Enabled Journey

    Science.gov (United States)

    Devine, Pamela Albert

    2012-01-01

    This article features Point Road School, a pre-K-4 school in New Jersey that enhances student learning by integrating new and emerging technologies into the curriculum. Point Road School's technology story began in 1996 with a grant for a classroom modem so students could email their university literacy buddies. The New Jersey school has moved…

  18. TECHNOLOGICAL INNOVATIONS AND SOCIETY.

    Science.gov (United States)

    MORSE, DEAN; WARNER, AARON W.

    THE PAPERS AND DISCUSSIONS IN THIS BOOK REPRESENT THE DELIBERATIONS OF THE 1964-65 COLUMBIA SEMINAR OF TECHNOLOGY AND SOCIAL CHANGE IN WHICH, DURING REGULAR MONTHLY MEETINGS THROUGHOUT THE ACADEMIC YEAR, A DIVERSE GROUP OF PHYSICAL SCIENTISTS, SOCIAL SCIENTISTS, BUSINESS LEADERS, AND PUBLIC OFFICIALS ATTEMPED TO RELATE TECHNOLOGY TO INNOVATION AND…

  19. Danish SDHW Technology

    DEFF Research Database (Denmark)

    Furbo, Simon

    1996-01-01

    The status of Danish technology for solar heating systems for hot water supply as well as R&D work in the field is presented.......The status of Danish technology for solar heating systems for hot water supply as well as R&D work in the field is presented....

  20. Mechatronics and hybrid technologies

    DEFF Research Database (Denmark)

    2008-01-01

    R&D international contributions to control and design of novel intelligent mechatronic products and solutions with sensor- and actuator technology.......R&D international contributions to control and design of novel intelligent mechatronic products and solutions with sensor- and actuator technology....

  1. Emerging wind energy technologies

    DEFF Research Database (Denmark)

    Rasmussen, Flemming; Grivel, Jean-Claude; Faber, Michael Havbro

    2014-01-01

    This chapter will discuss emerging technologies that are expected to continue the development of the wind sector to embrace new markets and to become even more competitive.......This chapter will discuss emerging technologies that are expected to continue the development of the wind sector to embrace new markets and to become even more competitive....

  2. Rehabilitation Technology Review.

    Science.gov (United States)

    Hatherleigh Co., Ltd., New York, NY.

    Designed as a special continuing education program for rehabilitation professionals, this document is divided into five lessons. Lesson 1, "Technology Assessment: Determining the Needs" (Ricardo G. Cerna), includes discussion on technology assessment and determining the needs of the clients as well as different types of assistive…

  3. Nuclear safeguards technology handbook

    International Nuclear Information System (INIS)

    1977-12-01

    The purpose of this handbook is to present to United States industrial organizations the Department of Energy's (DOE) Safeguards Technology Program. The roles and missions for safeguards in the U.S. government and application of the DOE technology program to industry safeguards planning are discussed. A guide to sources and products is included

  4. Environmental science and technology

    Energy Technology Data Exchange (ETDEWEB)

    Manahan, S.E. [Univ. of Missouri, Columbia, MO (United States)

    1998-12-31

    This complete survey of modern environmental science covers the four traditional spheres of the environment: water, air, earth, and life, and introduces a fifth sphere -- the anthrosphere -- which the author defines as the sphere of human activities, especially technology, that affect the earth. The book discusses how technology can be used in a manner that minimizes environmental disruption.

  5. What Is Educational Technology?

    Science.gov (United States)

    Ingle, Henry T.

    1975-01-01

    Featured in this issue are the English translations of two speeches delivered to graduate students in educational technology at Pontificia Universidade, Porto Alegre, Brazil. Henry Ingle defines educational technology in the traditional as well as modern sense, describes its essential elements, and discusses situations in which the use of…

  6. Information technology ethics

    DEFF Research Database (Denmark)

    Hongladarom, Soraj; Ess, Charles

    This book was the first publication to take a genuinely global approach to the diverse ethical issues evoked by Information and Communication Technologies and their possible resolutions. Readers will gain a greater appreciation for the problems and possibilities of genuinely global information...... ethics, which are urgently needed as information and communication technologies continue their exponential growth...

  7. Discourses of Technology

    DEFF Research Database (Denmark)

    Sommer, Jannek K.; Knudsen, Gry Høngsmark

    technology products to explore the negotiation of the familiar and alien that makes consumers reject or embrace a new technology. Thus, this particular project sets out to analyze consumer discourses surrounding the Google Glass video “How it Feels [through Google Glass]” on YouTube, because we want...

  8. Assistive Technology (Moldinclud)

    OpenAIRE

    Luján Mora, Sergio

    2011-01-01

    Slides of the seminar "Assistive Technology" taught at the Institul de Stat de Instruire Continua (Chisinau, Moldova) in november 2011. Transparencias del seminario "Assistive Technology" impartido en el Institul de Stat de Instruire Continua (Chisinau, Moldavia) en noviembre 2011. Tempus project: MOLDINCLUD, Teaching Training Centre for Inclusive Education (TEMPUS 158980-2009).

  9. Educational Technology in Japan.

    Science.gov (United States)

    Sakamoto, Takashi

    1987-01-01

    This overview of the current state of educational technology in Japan includes discussions of professional associations; academic and popular journals; diffusion of media and the budget in elementary and secondary schools; recent trends in government policies; educational technology research; a literature review; and suggestions of future trends.…

  10. Arts and Technology

    DEFF Research Database (Denmark)

    This book constitutes the thoroughly refereed post-conference proceedings of the Second International Conference on Arts and Technology, ArtsIT 2011, which was held in December 2011 in Esbjerg, Denmark. The 19 revised full papers and the two poster papers cover various topics such as Interaction...... and Art, Music and Performance, and Digital Technology....

  11. Implementation of Emerging Technologies

    DEFF Research Database (Denmark)

    Barba, F. J.; Orlien, Vibeke; Mota, Maria J.

    2016-01-01

    resources. Lastly, studies with specific examples of the implementation of these novel processing technologies in food industry are described, focusing on the application of high-pressure processing and pulsed electric fields to orange juice, milk, and oysters. Higher implementation costs were observed...... electric fields, ohmic heating, microwave, and ultrasound) emerging technologies are briefly reviewed. Most of these technologies have found niche applications in the food industry, replacing or complementing conventional preservation technologies. Thereby, data on commercialization, energy, and microbial......Novel processing technologies have been gaining interest among food researchers due to their lower impact on nutritional and sensory properties of the products compared to the conventional thermal techniques. In this chapter some of the most well-studied (eg, high-pressure processing, pulsed...

  12. Technology research and development

    International Nuclear Information System (INIS)

    Haas, G.M.; Abdov, M.A.; Baker, C.C.; Beuligmann, R.F.

    1985-01-01

    The U.S. Dept. of Energy discusses the new program plan, the parameters of which are a broad scientific and technology knowledge base, an attractive plasma configuration to be determined, and other issues concerning uncertainty as to what constitutes attractive fusion options to be determined in the future, and increased collaboration. Tables show changing directions in magnetic fusion energy, two examples of boundary condition impacts on long-term technology development, and priority classes of the latter. The Argonne National Laboratory comments on the relationship between science, technology and the engineering aspects of the fusion program. UCLA remarks on the role of fusion technology in the fusion program plan, particularly on results from the recent studies of FINESSE. General Dynamics offers commentary on the issues of a reduced budget, and new emphasis on science which creates an image of the program. A table illustrates technology research and development in the program plan from an industrial perspective

  13. Technology in L1

    DEFF Research Database (Denmark)

    Elf, Nikolaj Frydensbjerg; Hanghøj, Thorkild; Skaar, Håvard

    2015-01-01

    -of-school literacy practices. A final finding is the emphasis on teacher uncertainty regarding how and why to integrate technology within existing paradigms of the subject. This calls for further research on how technology may be justified in L1 practice, including various forms of teacher education.......In recent decades, several Scandinavian research projects have had an explicit focus on how technology intervenes in L1 (or so-called Mother Tongue Education) practices in Swedish, Norwegian and Danish educational contexts, and how this may impact on understanding of the subject. There is currently...... no systematic overview of the documented possibilities and challenges related to the use of technology in L1. At the same time, there is terminological confusion in use of ‘technology’ and related concepts in L1. Finally, there is a general lack of critical reflection on the relation between technological...

  14. Industrial technology transfer

    International Nuclear Information System (INIS)

    Bulger, W.

    1982-06-01

    The transfer of industrial technology is an essential part of the CANDU export marketing program. Potential customers require the opportunity to become self-sufficient in the supply of nuclear plant and equipment in the long term and they require local participation to the maximum extent possible. The Organization of CANDU Industries is working closely with Atomic Energy of Canada Ltd. in developing comprehensive programs for the transfer of manufacturing technology. The objectives of this program are: 1) to make available to the purchasing country all nuclear component manufacturing technology that exists in Canada; and 2) to assure that the transfer of technology takes place in an efficient and effective way. Technology transfer agreements may be in the form of joint ventures or license agreements, depending upon the requirements of the recipient

  15. Designing Human Technologies

    DEFF Research Database (Denmark)

    Simonsen, Jesper

    Research Initiative supporting Roskilde University’s new Humanities and Technology bachelor programme (‘HumTek’), and its three dimensions: Design, Humanities, and Technology. The research initiative involves 70 researchers from different departments and research groups at Roskilde University through...... a shared interdisciplinary research and educational collaboration. As a creative research initiative it focuses on change and innovative thinking. The innovativeness is a result of the strongly interdisciplinary perspective which is at the heart of Designing Human Technologies. Designing Human Technologies......Design is increasingly becoming a part of the university curriculum and research agenda. The keynote present and discuss Designing Human Technologies – an initiative aiming at establishing a design oriented main subject area alongside traditional main subject areas such as Natural Science...

  16. Art, Technology and Nature

    DEFF Research Database (Denmark)

    Since 1900, the connections between art and technology with nature have become increasingly inextricable. Through a selection of innovative readings by international scholars, this book presents the first investigation of the intersections between art, technology and nature in post-medieval times....... Transdisciplinary in approach, this volume’s 14 essays explore art, technology and nature’s shifting constellations that are discernible at the micro level and as part of a larger chronological pattern. Included are subjects ranging from Renaissance wooden dolls, science in the Italian art academies, and artisanal...... Camilla Skovbjerg Paldam and Jacob Wamberg trace the Kantian heritage of radically separating art and technology, and inserting both at a distance to nature, suggesting this was a transient chapter in history. Thus, they argue, the present renegotiation between art, technology and nature is reminiscent...

  17. Fusion technology programme

    International Nuclear Information System (INIS)

    Finken, D.

    1984-04-01

    KfK participates to the Fusion Technology Programme of the European Community. Most of the work in progress addresses the Next European Torus (NET) and the long term technology aspects as defined in the 82/86 programme. A minor part serves to preparation of future contributions and to design studies on fusion concepts in a wider perspective. The Fusion Technology Programme of Euratom covers mainly aspects of nuclear engineering. Plasma engineering, heating, refueling and vacuum technology are at present part of the Physics Programme. In view of NET, integration of the different areas of work will be mandatory. KfK is therefore prepared to address technical aspects beyond the actual scope of the physics experiments. The technology tasks are reported project wise under title and code of the Euratom programme. Most of the projects described here are shared with other European fusion laboratories as indicated in the table annexed to this report. (orig./GG)

  18. Energy and technology review

    International Nuclear Information System (INIS)

    Quirk, W.J.; Bookless, W.A.

    1994-05-01

    The Lawrence Livermore National Laboratory, operated by the University of California for the United States Department of Energy, was established in 1952 to do research on nuclear weapons and magnetic fusion energy. Since then, in response to new national needs, we have added other major programs, including technology transfer, laser science (fusion, isotope separation, materials processing), biology and biotechnology, environmental research and remediation, arms control and nonproliferation, advanced defense technology, and applied energy technology. These programs, in turn, require research in basic scientific disciplines, including chemistry and materials science, computing science and technology, engineering, and physics. The Laboratory also carries out a variety of projects for other federal agencies. Energy and Technology Review is published monthly to report on unclassified work in all our programs. This issue reviews work performed in the areas of modified retoring for waste treatment and underground stripping to remove contamination

  19. Globalization and Technology

    Directory of Open Access Journals (Sweden)

    Traian-Alexandru Miu

    2016-01-01

    Full Text Available Globalization, very complex phenomenon, involves overcoming the barriers between different states, which allowed the rapid transfer of capital, technology, information, and the "toxins" from one country to another. First, the technology formed the basis of rapid expansion of great ideas promoted by globalization. Undeniable progress in the field of technology and science, has conferred to the man extraordinary powers that have been used most often to the detriment of his spiritual progress. We must not deny that science and technology have brought many benefits to human, and he could expand the knowledge horizon upon the world in which he lives, exploiting information acquired and share them with others. Science and technology must become for postmodern man ways of talk and communion between human and divinity, all to the praise of God and the perfection of the creature.

  20. Working around technologies

    DEFF Research Database (Denmark)

    Dupret, Katia

    2017-01-01

    expressions of professionals’ active encounter with the complexity of work situations, and can therefore be important signs of professional ethical judgement. Drawing on science and technology studies and the concept of invisible work, the study discusses workaround situations that arise in health care work......This study discusses how professionalism and work ethics influence how health care professionals work around new technologies. When people avoid using technologies, they are not necessarily ceasing to engage in their work activities. The workaround strategies presented here are rather practical...... in Denmark. The aim and contribution of the study is twofold. First, it attempts to revitalise the discussion on technology workaround strategies as responsible professionalism. Second, it will direct attention to and contribute to an understanding of how the normativity embedded in technological development...

  1. Interpretation of Internet technology

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    2001-01-01

    Research scope: The topic of the research project is to investigate how new internet technologies such as e-trade and customer relation marketing and management are implemented in Danish food processing companies. The aim is to use Weick's (1995) sensemaking concept to analyse the strategic...... processes leading to the use of internet marketing technologies and to investigate how these new technologies are interpreted into the organisation. Investigating the organisational socio-cognitive processes underlying the decision making processes will give further insight into the socio......-cognitive competencies of organisations (Rindova & Fombrunn, 1999). The aim is to contribute to the existing technological implementation theory complex by studying the relationships between the elements of the socio-cognitive processes and the resulting interpretations and actions when new technologies are implemented...

  2. 2017 Annual Technology Baseline

    Energy Technology Data Exchange (ETDEWEB)

    Cole, Wesley J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Hand, M. M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Eberle, Annika [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Beiter, Philipp C [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Kurup, Parthiv [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Turchi, Craig S [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Feldman, David J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Margolis, Robert M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Augustine, Chad R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Maness, Michael [Formerly NREL; O' Connor, Patrick [Oak Ridge National Laboratory

    2018-03-26

    Consistent cost and performance data for various electricity generation technologies can be difficult to find and may change frequently for certain technologies. With the Annual Technology Baseline (ATB), the National Renewable Energy Laboratory annually provides an organized and centralized set of such cost and performance data. The ATB uses the best information from the Department of Energy national laboratories' renewable energy analysts as well as information from the Energy Information Administration for fuel-based technologies. The ATB has been reviewed by experts and it includes the following electricity generation technologies: land-based wind, offshore wind, utility-scale solar photovoltaics (PV), commercial-scale solar PV, residential-scale solar PV, concentrating solar power, geothermal power, hydropower, coal, natural gas, nuclear, and conventional biopower. This webinar presentation introduces the 2017 ATB.

  3. Technology and Sport

    DEFF Research Database (Denmark)

    Møller, Rasmus Bysted; Møller, Verner

    2015-01-01

    The relationship between sport and technology is close and can be both fruitful and destructive. Technology has a constitutive function in sport as it makes the activity possible and it can enhance performance as well as the sporting experience. The use of football boots is clearly more comfortable...... and effective than playing in bare feet in a game of football. However, sport challenges its athletes by demanding the employment of less efficient means rather than more efficient means in pursuit of sport specific goals. Therefore technology can potentially subtract from the sporting experience and even...... has long been a heated topic and with gene technology waiting around the corner the relationship between sport and technology has become strained and is more and more often viewed as problematic rather than benign. In this chapter we follow up on this trend by exposing what we consider a tendency...

  4. Accelerator technology in tokamaks

    International Nuclear Information System (INIS)

    Kustom, R.L.

    1977-01-01

    This article presents the similarities in the technology required for high energy accelerators and tokamak fusion devices. The tokamak devices and R and D programs described in the text represent only a fraction of the total fusion program. The technological barriers to producing successful, economical tokamak fusion power plants are as many as the plasma physics problems to be overcome. With the present emphasis on energy problems in this country and elsewhere, it is very likely that fusion technology related R and D programs will vigorously continue; and since high energy accelerator technology has so much in common with fusion technology, more scientists from the accelerator community are likely to be attracted to fusion problems

  5. Technology for Peacebuilding

    Directory of Open Access Journals (Sweden)

    Helena Puig Larrauri

    2013-11-01

    Full Text Available New technologies are changing how and when we learn about events and choose to respond to them. Mobile phones and the internet have altered how we engage with the world. With technology usage expanding rapidly in the developing world, new avenues of participation, engagement, and accountability are emerging. Globally, more people now have the opportunity to actively make use of these tools to participate in processes that impact their societies. This opportunity for participation is also an opportunity for engaging in new ways with peacebuilding processes. As the field of technology for peacebuilding grows, most attention has been paid to the potential of new technologies for bridging the gap between warning and response. Whilst the focus on the use of technology for early warning and response is important, there is more to this growing field. The empowerment of people to participate in localized conflict management efforts is one of the most significant innovations and opportunities created by new technologies. Technology can contribute to peacebuilding processes by offering tools that foster collaboration, transform attitudes, and give a stronger voice to communities. This article aims to give practitioners two related frameworks to understand how new technologies can enhance peacebuilding. The first section looks at the functions that technology can have in a peacebuilding program as a tool for data processing, communication, engagement, and gaming. We then examine the program areas that new technologies can best contribute to, covering early warning/early response systems, programs that allow citizens to voice their opinions and experiences, collaboration efforts, and programs aimed at transforming attitudes.

  6. Excursions in technology policy

    Science.gov (United States)

    Archibald, Robert B.

    1995-01-01

    This technical report presents a summary of three distinct projects: (1) Measuring economic benefits; (2) Evaluating the SBIR program; and (3) A model for evaluating changes in support for science and technology. the first project deals with the Technology Applications Group (TAG) at NASA Langley Research Center. The mission of TAG is to assist firms interested in commercializing technologies. TAG is a relatively new group as is the emphasis on technology commercialization for NASA. One problem faced by TAG and similar groups at other centers is measuring their effectiveness. The first project this summer, a paper entitled, 'Measuring the Economic Benefits of Technology Transfer from a National Laboratory: A Primer,' focused on this measurement problem. We found that the existing studies of the impact of technology transfer on the economy were conceptually flawed. The 'primer' outlines the appropriate theoretical framework for measuring the economic benefits of technology transfer. The second project discusses, one of the programs of TAG, the Small Business Innovation Research (SBIR) program. This program has led to over 400 contracts with Small Business since its inception in 1985. The program has never been evaluated. Crucial questions such as those about the extent of commercial successes from the contracts need to be answered. This summer we designed and implemented a performance evaluation survey instrument. The analysis of the data will take place in the fall. The discussion of the third project focuses on a model for evaluating changes in support for science and technology. At present several powerful forces are combining to change the environment for science and technology policy. The end of the cold war eliminated the rationale for federal support for many projects. The new- found Congressional conviction to balance the budget without tax increases combined with demographic changes which automatically increase spending for some politically popular programs

  7. Communication technology update and fundamentals

    CERN Document Server

    Grant, August E

    2010-01-01

    New communication technologies are being introduced at an astonishing rate. Making sense of these technologies is increasingly difficult. Communication Technology Update and Fundamentals is the single best source for the latest developments, trends, and issues in communication technology. Featuring the fundamental framework along with the history and background of communication technologies, Communication Technology Update and Fundamentals, 12th edition helps you stay ahead of these ever-changing and emerging technologies.As always, every chapter ha

  8. United States advanced technologies

    International Nuclear Information System (INIS)

    Longenecker, J.R.

    1985-01-01

    In the United States, the advanced technologies have been applied to uranium enrichment as a means by which it can be assured that nuclear fuel cost will remain competitive in the future. The United States is strongly committed to the development of advanced enrichment technology, and has brought both advanced gas centrifuge (AGC) and atomic vapor laser isotope separation (AVLIS) programs to a point of significant technical refinement. The ability to deploy advanced technologies is the basis for the confidence in competitive future price. Unfortunately, the development of advanced technologies is capital intensive. The year 1985 is the key year for advanced technology development in the United States, since the decision on the primary enrichment technology for the future, AGC or AVLIS, will be made shortly. The background on the technology selection process, the highlights of AGC and AVLIS programs and the way to proceed after the process selection are described. The key objective is to maximize the sales volume and minimize the operating cost. This will help the utilities in other countries supply low cost energy on a reliable, long term basis. (Kako, I.)

  9. Technology and medicine.

    Science.gov (United States)

    Booth, C

    1985-05-22

    Technology, which is older than science, has been of vital importance in the development of modern medicine. Even so, there are voices of dissent to be heard. The disenchantment with technology expressed by Aldous Huxley in Brave new world has been echoed by contemporary writers on the technology of modern medicine. Medicine is seen by some to have been dehumanized by technology, and techniques that are expensive are thought to be consuming a greater proportion of health resources than they deserve. The practice of medicine has, nevertheless, been transformed by modern technology and diagnostic techniques and therapeutic measures undreamed of a few short decades ago are now commonplace. There is no reason why these developments should be any more dehumanizing than the use of similar techniques in modern transportation or communication, nor is their expense out of proportion when compared with other demands on the nation's purse. British workers have been at the forefront of many recent advances. Yet, even though the National Health Service provides a ready market for the products of British medical technology, the nation depends to an inordinate degree on imported products. In the development of appropriate medical technology there is an urgent need for better communication between inventors, scientists, industrialists and the National Health Service. At the same time there is an equal need for improved evaluation of untried techniques. The pressure for a central integrating body to coordinate resources could well be supported by the establishment of evaluation units in the different health authorities in this country.

  10. The technology vicinity: a location based view on technology

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.; Kocaoglu, D.F.; Anderson, T.R.

    2001-01-01

    The issue of technology transfer has been viewed from many different perspectives. In this case the focus is on the process of (production) technology transfer. One of the difficulties in studying international technology transfer is the definition of technology. The many technology definitions that

  11. COPPER CABLE RECYCLING TECHNOLOGY

    International Nuclear Information System (INIS)

    Chelsea Hubbard

    2001-01-01

    The United States Department of Energy (DOE) continually seeks safer and more cost-effective technologies for use in deactivation and decommissioning (D and D) of nuclear facilities. The Deactivation and Decommissioning Focus Area (DDFA) of the DOE's Office of Science and Technology (OST) sponsors large-scale demonstration and deployment projects (LSDDPs). At these LSDDPs, developers and vendors of improved or innovative technologies showcase products that are potentially beneficial to the DOE's projects and to others in the D and D community. Benefits sought include decreased health and safety risks to personnel and the environment, increased productivity, and decreased costs of operation. The Idaho National Engineering and Environmental Laboratory (INEEL) generated a list of statements defining specific needs and problems where improved technology could be incorporated into ongoing D and D tasks. One such need is to reduce the volume of waste copper wire and cable generated by D and D. Deactivation and decommissioning activities of nuclear facilities generates hundreds of tons of contaminated copper cable, which are sent to radioactive waste disposal sites. The Copper Cable Recycling Technology separates the clean copper from contaminated insulation and dust materials in these cables. The recovered copper can then be reclaimed and, more importantly, landfill disposal volumes can be reduced. The existing baseline technology for disposing radioactively contaminated cables is to package the cables in wooden storage boxes and dispose of the cables in radioactive waste disposal sites. The Copper Cable Recycling Technology is applicable to facility decommissioning projects at many Department of Energy (DOE) nuclear facilities and commercial nuclear power plants undergoing decommissioning activities. The INEEL Copper Cable Recycling Technology Demonstration investigated the effectiveness and efficiency to recycle 13.5 tons of copper cable. To determine the effectiveness

  12. Emergent technologies: 25 years

    Science.gov (United States)

    Rising, Hawley K.

    2013-03-01

    This paper will talk about the technologies that have been emerging over the 25 years since the Human Vision and Electronic Imaging conference began that the conference has been a part of, and that have been a part of the conference, and will look at those technologies that are emerging today, such as social networks, haptic technologies, and still emerging imaging technologies, and what we might look at for the future.Twenty-five years is a long time, and it is not without difficulty that we remember what was emerging in the late 1980s. Yet to be developed: The first commercial digital still camera was not yet on the market, although there were hand held electronic cameras. Personal computers were not displaying standardized images, and image quality was not something that could be talked about in a standardized fashion, if only because image compression algorithms were not standardized yet for several years hence. Even further away were any standards for movie compression standards, there was no personal computer even on the horizon which could display them. What became an emergent technology and filled many sessions later, image comparison and search, was not possible, nor the current emerging technology of social networks- the world wide web was still several years away. Printer technology was still devising dithers and image size manipulations which would consume many years, as would scanning technology, and image quality for both was a major issue for dithers and Fourier noise.From these humble beginnings to the current moves that are changing computing and the meaning of both electronic devices and human interaction with them, we will see a course through the changing technology that holds some features constant for many years, while others come and go.

  13. Digital security technology simplified.

    Science.gov (United States)

    Scaglione, Bernard J

    2007-01-01

    Digital security technology is making great strides in replacing analog and other traditional security systems including CCTV card access, personal identification and alarm monitoring applications. Like any new technology, the author says, it is important to understand its benefits and limitations before purchasing and installing, to ensure its proper operation and effectiveness. This article is a primer for security directors on how digital technology works. It provides an understanding of the key components which make up the foundation for digital security systems, focusing on three key aspects of the digital security world: the security network, IP cameras and IP recorders.

  14. Buildings Energy Technology

    Energy Technology Data Exchange (ETDEWEB)

    Cason, D.L.; Emmanuel, L. [eds.

    1996-11-01

    BET announces on a monthly basis current worldwide information available on the technology required for economic energy conservation in buildings and communities. It contains abstracts of DOE reports, journal articles, conference papers,patents,theses, and monographs added to the Energy Science and Technology Database during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through IEA`s Energy Technology Data Exchange or government- to-government agreements. The citations are available for online searching and retrieval; current information, added daily, is available to DOE and its contractors.

  15. Information Technology Service

    International Nuclear Information System (INIS)

    Ageron, M.; Boninchi, V.; Chartoire, M.; Combroux, A.; Giraud, N.; Jacquet, G.; Lagrange, B.; Malleret, S.; Martin, C.; Mas, J.; Morgue, M.; Ollivier, T.

    1998-01-01

    The information technology service works out the choices concerning the information technology systems of general use in the laboratory: computers, network, peripherals, workstations, software. It intervenes at the same time in the definition of the procedures and equipment specific to the research groups. The entire data acquisition is centralized by the service. The personnel is sharing the following two large directions of activities: - management of information technology park (setup, configuration and maintenance of the materials and soft ensemble, training and assistance afforded to users); - participation in software projects either in elaboration of applications or in realization and maintenance of specific tools

  16. Educational technology, reimagined.

    Science.gov (United States)

    Eisenberg, Michael

    2010-01-01

    "Educational technology" is often equated in the popular imagination with "computers in the schools." But technology is much more than merely computers, and education is much more than mere schooling. The landscape of child-accessible technologies is blossoming in all sorts of directions: tools for communication, for physical construction and fabrication, and for human-computer interaction. These new systems and artifacts allow educational designers to think much more creatively about when and where learning takes place in children's lives, both within and outside the classroom.

  17. ACCELERATING NANO-TECHNOLOGICAL

    DEFF Research Database (Denmark)

    Jensen, Jens Stissing; Koch, Christian

    2007-01-01

    By viewing the construction industry as a technological innovation system (TIS) this paper discusses possible initiatives to accelerate nanotechnological innovations. The point of departure is a recent report on the application of nano-technology in the Danish construction industry, which concludes...... of the system are furthermore poorly equipped at identifying potentials within high-tech areas. In order to exploit the potentials of nano-technology it is thus argued that an alternative TIS needs to be established. Initiatives should identify and support “incubation rooms” or marked niches in order...

  18. Bridge technology report

    CERN Document Server

    2013-01-01

    Please note this is a Short Discount publication. As LANs have proliferated, new technologies and system concepts have come to the fore. One of the key issues is how to interconnect networks. One means of interconnection is to use a 'bridge'. Other competing technologies are repeaters, routers, and gateways. Bridges permit traffic isolation, connect network segments together and operate at the MAC layer. Further, because they operate at the MAC layer, they can handle a variety of protocols such as TCP/IP, SNA, and X.25. This report focuses on the specific technology of bridging two netw

  19. Calculations in furnace technology

    CERN Document Server

    Davies, Clive; Hopkins, DW; Owen, WS

    2013-01-01

    Calculations in Furnace Technology presents the theoretical and practical aspects of furnace technology. This book provides information pertinent to the development, application, and efficiency of furnace technology. Organized into eight chapters, this book begins with an overview of the exothermic reactions that occur when carbon, hydrogen, and sulfur are burned to release the energy available in the fuel. This text then evaluates the efficiencies to measure the quantity of fuel used, of flue gases leaving the plant, of air entering, and the heat lost to the surroundings. Other chapters consi

  20. Technology transfer and innovation

    International Nuclear Information System (INIS)

    Ashworth, Graham; Thornton, Anna

    1987-01-01

    The aims of the conference were advice, assistance and action for all those with technology to licence or inventions to patent, and for people seeking financial help and advice. There was a free exchange of ideas and information. Of the forty or so papers collected together, many are concerned with the financial aspects of new ventures, others look at technology transfer from academic institutes and schemes which support technological problems. One paper on fast reactor collaboration in Europe, is indexed separately. (U.K.)

  1. Fusion technology programme

    International Nuclear Information System (INIS)

    Finken, D.

    1985-05-01

    In the current Fusion Technology Programme of the European Community the KfK association is working at present on 16 R and D contracts. Most of the work is strongly oriented towards the Next European Torus. Direct support to NET is given by three KfK delegates being member of the NET study group. In addition to the R and D contracts the association is working on 11 NET study contracts. Though KfK contributes to all areas defined in fusion technology, the main emphasis is put on superconducting magnet and breeding blanket development. Other important fields are tritium technology, materials research, and remote handling. (orig./GG)

  2. Communications technology handbook

    CERN Document Server

    Lewis, Geoff

    2013-01-01

    This is the first point of reference for the communications industries. It offers an introduction to a wide range of topics and concepts encountered in the field of communications technology. Whether you are looking for a simple explanation, or need to go into a subject in more depth, the Communications Technology Handbook provides all the information you need in one single volume.This second edition has been updated to include the latest technology including: Video on DemandWire-less Distribution systemsHigh spee

  3. Introduction to Pinch Technology

    DEFF Research Database (Denmark)

    Rokni, Masoud

    ? How to put energy efficiency and other targets like reducing emissions, increasing plant capacities, improve product qualities etc, into a one coherent strategic plan for the overall site? All these questions and more can be answered with a full understanding of Pinch Technology and an awareness...... of the available tools for applying it in a practical way. The aim here is to provide the basic knowledge of pinch technology concept and how it can be applied across a wide range of process industries. The pinch technology was proposed firstly for optimization of heat exchangers and therefore it is introduced...

  4. Advances in Gyroscope Technologies

    CERN Document Server

    Armenise, Mario N; Dell'Olio, Francesco; Passaro, Vittorio MN

    2011-01-01

    This monograph collects and critically reviews the main results obtained by the scientific community in gyroscope technologies research field. It describes architectures, design techniques and fabrication technology of angular rate sensors proposed in literature. MEMS, MOEMS, optical and mechanical technologies are discussed together with achievable performance. The book also considers future research trends aimed to cover special applications. The book is intended for researchers and Ph.D. students interested in modelling, design and fabrication of gyros. The book may be a useful education su

  5. Victory of autonomy technology

    International Nuclear Information System (INIS)

    2009-04-01

    This book introduces story of an inventor, Jang, Yeong Sil, Screening of Jang, Yeong Sil award and prize-winning companies and titles, which are high flow blend resin by LG chemical company, lithium-ion polymer battery for MP3P by Samsung SDI Inc, tower mounted amplifier by ACE technology Inc, intelligent public access defibrillator by CU medical Inc, contrast enhanced phosphor by LG Inc, solid state drive for auxiliary memory by MTRON storage technology Co. LTD, and Selicion by Samsung fine chemistry, and new era of development of scientific technology.

  6. Benchmarking semantic web technology

    CERN Document Server

    García-Castro, R

    2009-01-01

    This book addresses the problem of benchmarking Semantic Web Technologies; first, from a methodological point of view, proposing a general methodology to follow in benchmarking activities over Semantic Web Technologies and, second, from a practical point of view, presenting two international benchmarking activities that involved benchmarking the interoperability of Semantic Web technologies using RDF(S) as the interchange language in one activity and OWL in the other.The book presents in detail how the different resources needed for these interoperability benchmarking activities were defined:

  7. Strategic Health Technology Incorporation

    CERN Document Server

    Wang, Binseng

    2009-01-01

    Technology is essential to the delivery of health care but it is still only a tool that needs to be deployed wisely to ensure beneficial outcomes at reasonable costs. Among various categories of health technology, medical equipment has the unique distinction of requiring both high initial investments and costly maintenance during its entire useful life. This characteristic does not, however, imply that medical equipment is more costly than other categories, provided that it is managed properly. The foundation of a sound technology management process is the planning and acquisition of equipment

  8. Power generation technologies

    CERN Document Server

    Breeze, Paul

    2014-01-01

    The new edition of Power Generation Technologies is a concise and readable guide that provides an introduction to the full spectrum of currently available power generation options, from traditional fossil fuels and the better established alternatives such as wind and solar power, to emerging renewables such as biomass and geothermal energy. Technology solutions such as combined heat and power and distributed generation are also explored. However, this book is more than just an account of the technologies - for each method the author explores the economic and environmental costs and risk factor

  9. Desalination processes and technologies

    International Nuclear Information System (INIS)

    Furukawa, D.H.

    1996-01-01

    Reasons of the development of desalination processes, the modern desalination technologies, such as multi-stage flash evaporation, multi-effect distillation, reverse osmosis, and the prospects of using nuclear power for desalination purposes are discussed. 9 refs

  10. Superconducting Technology Assessment

    National Research Council Canada - National Science Library

    2005-01-01

    This Superconducting Technology Assessment (STA) has been conducted by the National Security Agency to address the fundamental question of a potential replacement for silicon complementary metal oxide semiconductor (CMOS...

  11. International monitoring of technology

    International Nuclear Information System (INIS)

    Fischer, W.; Stein, G.

    1990-01-01

    The monitoring of the civilian nuclear energy sector has been effected successfully by IAEA and EURATOM and has contributed to a reduction of fears within the communities of nations. Certainly, it will not be possible to subject the whole world and whole spectrum of technology to monitoring. However, the nations should be enabled to reduce their greatest fears concerning an abuse and a misuse of technology by verification, and to check the compliance with such international agreements which regulate the application of a number of technologies. There are some (as yet rudimentary) approaches to an international verification in the field of environmental protection and resource policies. Nuclear energy with its sophisticated verification procedure has taken one great step ahead of the other fields. The strengths and weaknesses of its verification regime should be learned from when filling the virgin fields of international technology monitoring and its instrument, i.e. international verification. (orig./HSCH) [de

  12. Ocean Technology Development Tank

    Data.gov (United States)

    Federal Laboratory Consortium — The new SWFSC laboratory in La Jolla incorporates a large sea- and fresh-water Ocean Technology Development Tank. This world-class facility expands NOAA's ability to...

  13. Harwell directory of technology

    International Nuclear Information System (INIS)

    1988-02-01

    The Directory of Technology series of leaflets (10 in this folder) provides comprehensive information on the research and development facilities and expertise available at the Harwell laboratory of the United Kingdom Atomic Energy Authority. Each leaflet covers a field of technology and lists the Business Centres and related customer services offered. The leaflets are Process and Chemical Engineering Technology, Materials Technology, Evaluation and Monitoring Techniques and Instrumentation, Computing Science and Applications, Environmental, Medical and Analytical Sciences, Nuclear Engineering, Reactor Materials Behaviour and Safety Research, Radioactive Waste Management and Disposal, Nuclear Fuels Processing and Isotopes, Major Nuclear research and development facilities. There is a cross-referenced index which provides information to enable contact to be made with the appropriate business centre manager. (U.K.)

  14. Lightweight Small Arms Technologies

    National Research Council Canada - National Science Library

    Spiegel, Kori; Shipley, Paul

    2006-01-01

    .... The Lightweight Small Arms Technologies program was established to address this critical issue. The goals of the program prioritize weight reduction over any other characteristic, while balancing the requirements of lethality, reliability, and cost...

  15. Digital Technology Entrepreneurship

    DEFF Research Database (Denmark)

    Giones, Ferran; Brem, Alexander

    2017-01-01

    Technology entrepreneurship is an established concept in academia. However, recent developments in the context of digital entrepreneurship call for revision and advance- ment. The multiple possible combinations of technology and entrepreneurship have res- ulted in a diversity of phenomena...... with significantly different characteristics and socio-economic impact. This article is focused on the identification and description of technology entrepreneurship in times of digitization. Based on current examples, we identify and describe characterizations of technology entrepreneurship, digital techno- logy...... entrepreneurship, and digital entrepreneurship. With this new delineation of terms, we would like to foster discussion between researchers, entrepreneurs, and policy makers on the impact of digitization on entrepreneurship, and set a future research agenda....

  16. Active ageing technologies

    DEFF Research Database (Denmark)

    Lassen, Aske Juul

    In the recent decade the concept of active aging has become important in the Western hemisphere. The World Health Organization and The European Union have staged active aging as a core policy area and initiated programs of physical activity, independence and prolonged working lives among...... the elderly. As part of this rearticulation of old age, many new technologies take form. This paper uses a wide concept of technologies (devices, regimes, strategies and ways of doing) and argues that technologies form active aging subjectivities, and on the other hand, that these subjectivities...... in their socio-material practices form active aging. Hence, active aging is a mutual entanglement (Callon and Rabeharisoa 2004) between technologies, practices and subjectivities. The paper is based on four months of participant observations and 17 in-depth interviews with elderly persons conducted at three...

  17. The climate technology initiative

    International Nuclear Information System (INIS)

    Smith, Adam

    2000-01-01

    The CTI (Climate Technology Initiative) aims to promote those technologies which cause the minimum of harm to the environment: reducing emissions of greenhouse gases and supporting those countries most vulnerable to climate change are priorities. A strong case for cogeneration is made and it is pointed out that both the European Union and the USA aim to double their cogeneration capacity by 2010. The CTI holds training courses and seminars all over the world where the barriers to the expansion of climate-friendly technology are discussed. The article also mentions the CTI Co-operation Technology Implementation Plan, research and development, its website and search engine, its presence at all UNFCCC events and its awards programme

  18. Nuclear Technology applications

    International Nuclear Information System (INIS)

    Cibils Machado, W. E- mail: wrcibils@adinet.com.uy

    2002-01-01

    The present work tries on the applications of the nuclear technology in the life daily, such as agriculture and feeding, human health, industry, non destructive essays, isotopic hydrology, and the nuclear power stations for electricity production and radioisotopes production

  19. Handbook of vacuum technology

    CERN Document Server

    2016-01-01

    This comprehensive, standard work has been updated to remain an important resource for all those needing detailed knowledge of the theory and applications of vacuum technology. With many numerical examples and illustrations to visualize the theoretical issues.

  20. CSIR Technology Impact 2002

    CSIR Research Space (South Africa)

    CSIR

    2002-01-01

    Full Text Available This issue of Technology Impact offers a brief snapshot of CSIR activities during the year under review (1 March 2001 - 28 February 2002) by highlighting a number of innovative projects and initiatives in these areas....

  1. Biofuel technologies. Recent developments

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, Vijai Kumar [National Univ. of Ireland Galway (Ireland). Dept. of Biochemistry; MITS Univ., Rajasthan (India). Dept. of Science; Tuohy, Maria G. (eds.) [National Univ. of Ireland Galway (Ireland). Dept. of Biochemistry

    2013-02-01

    Written by experts. Richly illustrated. Of interest to both experienced researchers and beginners in the field. Biofuels are considered to be the main potential replacement for fossil fuels in the near future. In this book international experts present recent advances in biofuel research and related technologies. Topics include biomethane and biobutanol production, microbial fuel cells, feedstock production, biomass pre-treatment, enzyme hydrolysis, genetic manipulation of microbial cells and their application in the biofuels industry, bioreactor systems, and economical processing technologies for biofuel residues. The chapters provide concise information to help understand the technology-related implications of biofuels development. Moreover, recent updates on biofuel feedstocks, biofuel types, associated co- and byproducts and their applications are highlighted. The book addresses the needs of postgraduate researchers and scientists across diverse disciplines and industrial sectors in which biofuel technologies and related research and experimentation are pursued.

  2. Geothermal Technologies Program: Alaska

    Energy Technology Data Exchange (ETDEWEB)

    2005-02-01

    This fact sheets provides a summary of geothermal potential, issues, and current development in Alaska. This fact sheet was developed as part of DOE's GeoPowering the West initiative, part of the Geothermal Technologies Program.

  3. Will Technology Humanize Us?

    Science.gov (United States)

    Snider, Robert C.

    1972-01-01

    The author considers the question of whether technology will cause humanization or dehumanization in the schools. He concludes that we can not stop tecchnology; we can only give it direction and purpose. (Author/MS)

  4. Recombinant protein production technology

    Science.gov (United States)

    Recombinant protein production is an important technology for antibody production, biochemical activity study, and structural determination during the post-genomic era. Limiting factors in recombinant protein production include low-level protein expression, protein precipitation, and loss of protein...

  5. Active ageing technologies

    DEFF Research Database (Denmark)

    Lassen, Aske Juul

    ‘sites of active aging’ in Denmark. By presenting three technologies of active aging (billiards at an activity center for elderly persons, dancing tiles for rehabilitation after falls and an online fitness community for elderly persons) the paper suggests that active aging is more than regimes...... in their socio-material practices form active aging. Hence, active aging is a mutual entanglement (Callon and Rabeharisoa 2004) between technologies, practices and subjectivities. The paper is based on four months of participant observations and 17 in-depth interviews with elderly persons conducted at three...... of physical and productive activity; e.g. that a game of billiards is a technology of active aging. Thus, active aging is enacted in the socio-material practices of the technologies in this paper. The paper contributes with a strengthening of the concept of active aging, by focusing on entangled practices...

  6. Wind Turbine Technologies

    DEFF Research Database (Denmark)

    Hansen, Anca Daniela

    2017-01-01

    The wind turbine technology is a very complex technology involving multidisciplinary and broad technical disciplines such as aerodynamics, mechanics, structure dynamics, meteorology as well as electrical engineering addressing the generation, transmission, and integration of wind turbines...... into the power system. Wind turbine technology has matured over the years and become the most promising and reliable renewable energy technology today. It has moved very fast, since the early 1980s, from wind turbines of a few kilowatts to today’s multimegawatt-sized wind turbines [13]. Besides their size......, the design of wind turbines has changed from being convention driven to being optimized driven within the operating regime and market environment. Wind turbine designs have progressed from fixed speed, passive controlled and with drive trains with gearboxes, to become variable speed, active controlled...

  7. Broadband Electromagnetic Technology

    Science.gov (United States)

    2011-06-23

    The objectives of this project are to continue the enhancements to the combined Broadband Electromagnetic and Full Encirclement Unit (BEM-FEU) technologies and to evaluate the systems capability in the laboratory and the field. The BEM instrument ...

  8. Fixed automated spray technology.

    Science.gov (United States)

    2011-04-19

    This research project evaluated the construction and performance of Boschungs Fixed Automated : Spray Technology (FAST) system. The FAST system automatically sprays de-icing material on : the bridge when icing conditions are about to occur. The FA...

  9. Prosthetics and Related Technology

    Science.gov (United States)

    ... edge technologies such as robotics, tissue engineering, and nanotechnology to create lighter limbs that closely mimic their ... to teach service members’ spouses alternative and complementary medicine techniques shown to lessen anxiety and pain associated ...

  10. Technology applications bulletins

    International Nuclear Information System (INIS)

    Koncinski, W. Jr.

    1989-02-01

    Martin Marietta Energy Systems, Inc. (Energy Systems), operates five facilities for the US Department of Energy (DOE): the Oak Ridge National Laboratory (ORNL), which is a large, multidisciplinary research and development (R and D) center whose primary mission is energy research; the Oak Ridge Y-12 Plant, which engages in defense research, development, and production; and the uranium-enrichment plants at Oak Ridge; Paducah, Kentucky; and Portsmouth, Ohio. Much of the research carried out at these facilities is of interest to industry and to state or local governments. To make information about this research available, the Energy Systems Office of Technology Applications publishes brief descriptions of selected technologies and reports. These technology applications bulletins describe the new technology and inform the reader about how to obtain further information, gain access to technical resources, and initiate direct contact with Energy Systems researchers

  11. Technology transfer quality assurance

    International Nuclear Information System (INIS)

    Hood, F.C.

    1991-03-01

    The results of research conducted at Pacific Northwest Laboratory (PNL) for the DOE are regularly transferred from the laboratory to the private sector. The principal focus of PNL is on environmental research and waste management technology; other programs of emphasis include molecular science research. The technology transfer process is predicated on Quality to achieve its objectives effectively. Total quality management (TQM) concepts and principles readily apply to the development and translation of new scientific concepts into commercial products. The concept of technology transfer epitomizes the TQM tenet of continuous improvement: always striving for a better way to do things and always satisfying the customer. A successful technology transfer process adds value to society by providing new or enhanced processes, products, and services to government and commercial customers, with a guarantee of product pedigree and process validity. 2 refs

  12. Smart Farming Technologies

    DEFF Research Database (Denmark)

    Balafoutis, Athanasios T.; Beck, Bert; Tsiropoulos, Zisis

    2017-01-01

    Precision Agriculture is a cyclic optimization process where data have to be collected from the field, analysed and evaluated and finally used for decision making for site-specific management of the field. Smart farming technologies (SFT ) cover all these aspects of precision agriculture and can...... comprise the delineation of management zones, decision support systems and farm management information system s. Finally, precision application technologies embrace variable-rate application technologies, precision irrigation and weeding and machine guidance. In this chapter, the reader can find...... a technical description of the technologies included in each category accompanied by a taxonomy of all SFT in terms of farming system type, cropping system, availability, level of investment and farmers’ motives to adopt them. Finally, the economic impact that each SFT has compared to conventional...

  13. Vehicle Technologies Program Overview

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2006-09-05

    Overview of the Vehicle Technologies Program including external assessment and market view; internal assessment, program history and progress; program justification and federal role; program vision, mission, approach, strategic goals, outputs, and outcomes; and performance goals.

  14. Fiber Optics Technology.

    Science.gov (United States)

    Burns, William E.

    1986-01-01

    Discusses various applications of fiber optics technology: information systems, industrial robots, medicine, television, transportation, and training. Types of jobs that will be available with fiber optics training (such as electricians and telephone cable installers and splicers) are examined. (CT)

  15. Applied machining technology

    CERN Document Server

    Tschätsch, Heinz

    2010-01-01

    Machining and cutting technologies are still crucial for many manufacturing processes. This reference presents all important machining processes in a comprehensive and coherent way. It includes many examples of concrete calculations, problems and solutions.

  16. Banking on technology.

    Science.gov (United States)

    Bolster, Carole J

    2007-04-01

    New technology is being used by banks to help providers improve their revenue cycle through: Digital lockbox service. Remote deposit. Web-based payment. Automated payment processing at the point of service.

  17. Technology catalogue. Second edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    The Department of Energy`s (DOE`s) Office of Environmental Management (EM) is responsible for remediating DOE contaminated sites and managing the DOE waste inventory in a safe and efficient manner. EM`s Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste-management programs within EM. The purpose of the Technology Catalogue is to: (a) provide performance data on OTD-developed technologies to scientists and engineers responsible for preparing Remedial Investigation/Feasibility Studies (RI/FSs) and other compliance documents for the DOE`s clean-up and waste-management programs; and (b) identify partnering and commercialization opportunities with industry, other federal and state agencies, and the academic community.

  18. Institutionalized Technological Foresight

    DEFF Research Database (Denmark)

    Koch, Christian; Hansen, Hans Henrik; Stissing Jensen, Jens

    2008-01-01

    , and they become dependent of national and other institutional foresights. Since 2000 the Danish ministry of Science, Technology and Innovation has tendered nine technology foresights. These could be used by SMEs as supplementary to internal decision making. One also expects to see these foresights placed firmly...... in the national strategy of coordinating and strengthening policy on research, technology and innovation in one superministry. The paper evaluates the methods, impact and role in policy making of these technological foresights. The particular role of institutionalized public foresight in relation to enterprise......, but all draw on expertpanels, the foresighters own analyses, and none on the Delphi method. The impact and role in policy making is also rather differentiated from relatively marginal and with predominantly legitimizing purposes to direct ministerial initiatives of research project and innovation...

  19. Energy and technology review

    International Nuclear Information System (INIS)

    1981-10-01

    Research is described in three areas, high-technology design of unconventional, nonnuclear weapons, a model for analyzing special nuclear materials safeguards decisions, and a nuclear weapons accident exercise (NUWAX-81)

  20. Technology catalogue. Second edition

    International Nuclear Information System (INIS)

    1995-04-01

    The Department of Energy's (DOE's) Office of Environmental Management (EM) is responsible for remediating DOE contaminated sites and managing the DOE waste inventory in a safe and efficient manner. EM's Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste-management programs within EM. The purpose of the Technology Catalogue is to: (a) provide performance data on OTD-developed technologies to scientists and engineers responsible for preparing Remedial Investigation/Feasibility Studies (RI/FSs) and other compliance documents for the DOE's clean-up and waste-management programs; and (b) identify partnering and commercialization opportunities with industry, other federal and state agencies, and the academic community

  1. Arsenic Treatment Technology Demonstrations

    Science.gov (United States)

    EPA’s research for the new Arsenic Rule focused on the development and evaluation of innovative methods and cost-effective technologies for improving the assessment and control of arsenic contamination.

  2. Department of reactor technology

    International Nuclear Information System (INIS)

    1982-04-01

    The general development of the Department of Reacctor Technology at Risoe during 1981 is presented, ant the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included. (author)

  3. Armament Technology Facility (ATF)

    Data.gov (United States)

    Federal Laboratory Consortium — The Armament Technology Facility is a 52,000 square foot, secure and environmentally-safe, integrated small arms and cannon caliber design and evaluation facility....

  4. Information Technology Industry 2004

    National Research Council Canada - National Science Library

    Altieri, Richard; Buccheit, Nathan; Burke, Kyle; Dillard, Norvel; Dolan, Patrick; Edwards, Gregory; Elins, Daniel; Gaines, Leonard; Goodwin, Steven; Lawrence, Michael

    2004-01-01

    .... This study will define the Information Technology Industry, give an overview of current domestic and international conditions, and then analyze the state of national network security and challenges faced by the U.S. government and U.S...

  5. CSIR Technology Impact 2003

    CSIR Research Space (South Africa)

    CSIR

    2003-01-01

    Full Text Available This issue of Technology Impact offers a brief snapshot of CSIR activities during the year under review (1 March 2002 - 28 February 2003) by highlighting a number of innovative projects and initiatives in various CSIR business units....

  6. Knowledge management technologies

    Science.gov (United States)

    2000-08-01

    This report presents recommendations for technologies that have potential to contribute to future development and management of Kansas Department of Transportation (KDOT) information systems. The recommendations are accomplished by examples of design...

  7. Technology-Use Mediation

    DEFF Research Database (Denmark)

    Bansler, Jørgen P.; Havn, Erling C.

    2004-01-01

    Implementation of new computer-mediated communication (CMC) systems in organizations is a complex socio-technical endeavour, involving the mutual adaptation of technology and organization over time. Drawing on the analytic concept of sensemaking, this paper provides a theoretical perspective...... that deepens our understanding of how organizations appropriate new electronic communication media. The paper analyzes how a group of mediators in a large, multinational company adapted a new web-based CMC technology (a virtual workspace) to the local organizational context (and vice versa) by modifying...... features of the technology, providing ongoing support for users, and promoting appropriate conventions of use. We found that these mediators exerted considerable influence on how the technology was established and used in the organization. The mediators were not neutral facilitators of a well...

  8. In situ Remediation Technologies

    NARCIS (Netherlands)

    Grotenhuis, J.T.C.; Rijnaarts, H.H.M.

    2011-01-01

    A summary of two decades of developments of In Situ remediation is presented in this chapter. The basic principles of In Situ technology application are addressed, such as equilibrium relations between contaminant phases, factors controlling biological and geochemical processes, contaminant

  9. Electrical Impedance Tomography Technology

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal for the Electrical Impedance Tomography Technology (EITT) project is to develop a reliable portable, lightweight device providing two-dimensional...

  10. Region rebranding technologies

    OpenAIRE

    Kolesnycka, Natalia

    2013-01-01

    The purpose of this paper is to highlight concepts of rebranding and its technologies. The author believes that rebranding is the reflection of branding process that essentially the same thing. Actually author tries to show this in her work.

  11. Power conversion technologies

    Energy Technology Data Exchange (ETDEWEB)

    Newton, M. A.

    1997-02-01

    The Power Conversion Technologies thrust area identifies and sponsors development activities that enhance the capabilities of engineering at Lawrence Livermore National Laboratory (LLNL) in the area of solid- state power electronics. Our primary objective is to be a resource to existing and emerging LLNL programs that require advanced solid-state power electronic technologies.. Our focus is on developing and integrating technologies that will significantly impact the capability, size, cost, and reliability of future power electronic systems. During FY-96, we concentrated our research efforts on the areas of (1) Micropower Impulse Radar (MIR); (2) novel solid-state opening switches; (3) advanced modulator technology for accelerators; (4) compact accelerators; and (5) compact pulse generators.

  12. Information Technology Industry 2004

    National Research Council Canada - National Science Library

    Altieri, Richard; Buccheit, Nathan; Burke, Kyle; Dillard, Norvel; Dolan, Patrick; Edwards, Gregory; Elins, Daniel; Gaines, Leonard; Goodwin, Steven; Lawrence, Michael

    2004-01-01

    Forging an unprecedented partnership between the public and private sectors is essential to protect the vital interests of the United States in the wake of the ongoing Information Technology Revolution...

  13. Wavelength converter technology

    DEFF Research Database (Denmark)

    Kloch, Allan; Hansen, Peter Bukhave; Poulsen, Henrik Nørskov

    1999-01-01

    Wavelength conversion is important since it ensures full flexibility of the WDM network layer. Progress in optical wavelength converter technology is reviewed with emphasis on all-optical wavelength converter types based on semiconductor optical amplifiers.......Wavelength conversion is important since it ensures full flexibility of the WDM network layer. Progress in optical wavelength converter technology is reviewed with emphasis on all-optical wavelength converter types based on semiconductor optical amplifiers....

  14. Technology and Competitiveness

    OpenAIRE

    Jan Fagerberg

    1995-01-01

    This paper reviews the literature on technology and competitiveness. First, the concept of the international competitiveness of a country, and various theoretical approaches on the relationship between trade and growth, are discussed. Then a number of empirical studies of the impact of technology (as evidenced by R&D, patents, etc.) on exports are examined. The final section summarizes the evidence and considers the lessons for policy.

  15. Geolocation Technologies Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Magnoli, D E

    2003-06-02

    This paper is the final report for LL998 In Situ Sensing Subtask 7 (Geo-location) undertaken for NNSA NA-22 enabling technologies R&D for Counterproliferation Detection. A few state-of-the-art resolution parameters are presented for accelerometers, indoor and outdoor GPS (Global Positioning Satellite) systems, and INSs (Inertial Navigation Systems). New technologies are described, including one which has demonstrated the ability to track within a building to a resolution of under a foot.

  16. Does Technology Create Jobs?

    OpenAIRE

    Henderson, David R.; Krugman, Paul

    1997-01-01

    Two leading economists, MIT's Paul Krugman and the Hoover Institution's David R. Henderson, debate whether jobs lost to technology are met by a net increase in jobs elsewhere in a more productive economy. Krugman, a noted liberal, says maybe in the long run, but for now ordinary workers see their wages falling. Henderson, a conservative, says that the problem is not the elimination of jobs through technology but a workforce with inadequate skills.

  17. Wavelength converter technology

    DEFF Research Database (Denmark)

    Kloch, Allan; Hansen, Peter Bukhave; Poulsen, Henrik Nørskov

    1999-01-01

    Wavelength conversion is important since it ensures full flexibility of the WDM network layer. Progress in optical wavelength converter technology is reviewed with emphasis on air-optical wavelength converter types based on semiconductor optical amplifiers.......Wavelength conversion is important since it ensures full flexibility of the WDM network layer. Progress in optical wavelength converter technology is reviewed with emphasis on air-optical wavelength converter types based on semiconductor optical amplifiers....

  18. Broadcast sound technology

    CERN Document Server

    Talbot-Smith, Michael

    1990-01-01

    Broadcast Sound Technology provides an explanation of the underlying principles of modern audio technology. Organized into 21 chapters, the book first describes the basic sound; behavior of sound waves; aspects of hearing, harming, and charming the ear; room acoustics; reverberation; microphones; phantom power; loudspeakers; basic stereo; and monitoring of audio signal. Subsequent chapters explore the processing of audio signal, sockets, sound desks, and digital audio. Analogue and digital tape recording and reproduction, as well as noise reduction, are also explained.

  19. Token ring technology report

    CERN Document Server

    2013-01-01

    Please note this is a Short Discount publication. This report provides an overview of the IBM Token-Ring technology and products built by IBM and compatible vendors. It consists of two sections: 1. A summary of the design trade-offs for the IBM Token-Ring. 2. A summary of the products of the major token-ring compatible vendors broken down by adapters and components, wiring systems, testing, and new chip technology.

  20. INFORMATION TECHNOLOGIES IN TRAINING

    OpenAIRE

    Хамид Абдулович Гербеков; Сапият Кадыровна Байчорова; Мариям Срапиловна Лайпанова

    2017-01-01

    In the modern society one of the main competences of the person is ability quickly and qualitatively to work with information technologies to create and adapt to the tasks electronic resources with use of the modern information technologies. Thus the educational task of formation information competence and the level of information culture conforming to requirements of the modern information society is urgent. Significantly the role of a subject of the information scientist increases in school...

  1. Virtual Campus Hub technology

    DEFF Research Database (Denmark)

    Vercoulen, Frank; Badger, Merete; Monaco, Lucio

    This deliverable briefly describes which technological components have been delivered for the Virtual Campus Hub and how they can be used. A detailed discussion of the technical details of the components, how they were realized and how they fit the VCH concept can be found in deliverables D5.......4. Virtual Campus Hub Technology Evaluation Report and D6.7 The Virtual Campus Hub Concept....

  2. Industry Service - Technology Centre

    DEFF Research Database (Denmark)

    Hollensen, Svend; Grünbaum, Niels Nolsøe

    2011-01-01

    The chapter describes and explains the development of an Industry Service Technology (IS-T) portal solution at Danfoss for testing of products, including booking system for standardised 'service packages' in order to reduce waiting time.......The chapter describes and explains the development of an Industry Service Technology (IS-T) portal solution at Danfoss for testing of products, including booking system for standardised 'service packages' in order to reduce waiting time....

  3. Industrial communication technology handbook

    CERN Document Server

    Zurawski, Richard

    2014-01-01

    Featuring contributions from major technology vendors, industry consortia, and government and private research establishments, the Industrial Communication Technology Handbook, Second Edition provides comprehensive and authoritative coverage of wire- and wireless-based specialized communication networks used in plant and factory automation, automotive applications, avionics, building automation, energy and power systems, train applications, and more.New to the Second Edition:46 brand-new chapters and 21 substantially revised chaptersInclusion of the latest, most significant developments in spe

  4. Technology which desires

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sangyook

    2009-03-15

    The table of contents are technology, human and society, Frankenstein, prometheus in modern, modern technology which are pressing human and nature, utopia and dystopia don't come, progressing of bicycle, Edison built the system, clock and human from nano paint to nano machine, diesel locomotive and KTX, airplanes is disappearing, machine is monsters, Taylorism and dream of engineer, union between mass production and public consumption, go away mass production, humanoid and a cyborg and beginning of global village.

  5. Technology which desires

    International Nuclear Information System (INIS)

    Lee, Sangyook

    2009-03-01

    The table of contents are technology, human and society, Frankenstein, prometheus in modern, modern technology which are pressing human and nature, utopia and dystopia don't come, progressing of bicycle, Edison built the system, clock and human from nano paint to nano machine, diesel locomotive and KTX, airplanes is disappearing, machine is monsters, Taylorism and dream of engineer, union between mass production and public consumption, go away mass production, humanoid and a cyborg and beginning of global village.

  6. Technology and power plants

    International Nuclear Information System (INIS)

    Milora, S.

    2001-01-01

    In this paper the contributions presented at the 18 th IAEA Fusion Energy Conference in the field of technology and power plants are summarised with reference to the following distinct issues: ITER EDA Design, ITER Technology R and D, Progress Towards Advanced Performance and Steady State, Compact Cu Burning Plasma Experiments and Neutron Sources, Advanced Materials Research, Power Plant Design and Economic Forecasts, and Conclusions

  7. Information Technology Management

    OpenAIRE

    Patru Catalin; Petrache Alina

    2011-01-01

    Most of the Information technology management programs are designed to educate and develop managers who can effectively manage the planning, design, selection, implementation, use, and administration of emerging and converging information and communications technologies. The IT Manager and the Project Manager are not at odds. The Project Manager’s ability to focus knowledge, skills, tools and techniques on the temporary endeavor frees the IT Manager to focus on keeping the wheels of commerce ...

  8. The tailings technology suite

    Energy Technology Data Exchange (ETDEWEB)

    Jaremko, Deborah

    2011-10-15

    Oilsands tailing ponds contain leftover bitumen and asphaltenes, which are dangerous to local wildlife. The Oil Sands Tailings Consortium (OSTCS) was founded by all major mining players and aims to prompt collaboration within the oilsands industry to reclaim the tailings area. Each company has hitherto worked on different tailings management technologies, often duplicating efforts. Some technologies proposed by these oilsands miners were introduced in this article.

  9. Technology Commercialization Program 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-11-01

    This reference compilation describes the Technology Commercialization Program of the Department of Energy, Defense Programs. The compilation consists of two sections. Section 1, Plans and Procedures, describes the plans and procedures of the Defense Programs Technology Commercialization Program. The second section, Legislation and Policy, identifies legislation and policy related to the Program. The procedures for implementing statutory and regulatory requirements are evolving with time. This document will be periodically updated to reflect changes and new material.

  10. Information technology made simple

    CERN Document Server

    Carter, Roger

    1991-01-01

    Information Technology: Made Simple covers the full range of information technology topics, including more traditional subjects such as programming languages, data processing, and systems analysis. The book discusses information revolution, including topics about microchips, information processing operations, analog and digital systems, information processing system, and systems analysis. The text also describes computers, computer hardware, microprocessors, and microcomputers. The peripheral devices connected to the central processing unit; the main types of system software; application soft

  11. Maturity in technology

    Directory of Open Access Journals (Sweden)

    L. Alberts

    1988-03-01

    Full Text Available The concept is developed that modern technology, because of its relationship with pure science, can never really become mature, but will always grow as the pool of scientific knowledge grows. Parameters indicating to some extent the degree of technological prowess in a society are compared for a spectrum of countries. It is clear that in spite of some internationally outstanding successes. South Africa must be regarded on average as a developing society.

  12. Information Technology for Healthcare

    OpenAIRE

    Abbas Yazdanpanah

    2016-01-01

    The article produced below hopes to focus on the use of information technology solutions for improving healthcare delivery systems. It explains evolution of IT-Enhanced healthcare from Telemedicine to e-health, including definition and requirements of telemedical systems. It also traces the evolution of contemporary telemedical systems and the challenges faced by future technologies including legal and formal aspects of telemedicine as well as its acceptance among users. It overvi...

  13. Information and Communication Technology

    OpenAIRE

    Spohr, Dennis; Cimiano, Philipp; Meier zu Verl, Christian; Horstmann, Wolfram

    2011-01-01

    This chapter describes the case study carried out at the Centre of Excellence Cognitive Interaction Technology (CITEC) at Universität Bielefeld. The aim is to provide a representative example of a research institution in the wider field of information and communications technology (ICT), with a specific focus on cognitive interaction and robotics engineering. After a brief introduction to the general structure and mission of CITEC, we will discuss the general scope of the case study, as well ...

  14. Department of Reactor Technology

    DEFF Research Database (Denmark)

    Risø National Laboratory, Roskilde

    The general development of the Department of Reactor Technology at Risø during 1981 is presented, and the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included.......The general development of the Department of Reactor Technology at Risø during 1981 is presented, and the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included....

  15. Globalization, technology and inequality

    OpenAIRE

    Gancia, Gino

    2012-01-01

    What are the effects of international integration on inequality, both between and within countries? The growing evidence that technology is the main determinant of wage and income differences may seem to imply that the forces of globalization only play a secondary role. Such a conclusion is however premature, in that it neglects the effect of international integration on technology itself. This opuscle summarizes recent and ongoing research studying how two important aspects of globalization,...

  16. Technology transfer for development

    International Nuclear Information System (INIS)

    Abraham, D.

    1990-07-01

    The IAEA has developed a multifaceted approach to ensure that assistance to Member States results in assured technology transfer. Through advice and planning, the IAEA helps to assess the costs and benefits of a given technology, determine the basic requirements for its efficient use in conditions specific to the country, and prepare a plan for its introduction. This report describes in brief the Technical Co-operation Programmes

  17. Sscience & technology review; Science Technology Review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This review is published ten times a year to communicate, to a broad audience, Lawrence Livermore National Laboratory`s scientific and technological accomplishments, particularly in the Laboratory`s core mission areas - global security, energy and the environment, and bioscience and biotechnology. This review for the month of July 1996 discusses: Frontiers of research in advanced computations, The multibeam Fabry-Perot velocimeter: Efficient measurement of high velocities, High-tech tools for the American textile industry, and Rock mechanics: can the Tuff take the stress.

  18. Technology transfer at TRIUMF

    International Nuclear Information System (INIS)

    Gardner, P.

    1994-06-01

    TRIUMF is Canada's major national research centre for sub-atomic physics. For the past five or six years, there has been an increasing emphasis on commercializing the technology that has emanated from the scientific research at the facility. This emphasis on technology transfer reflects a national policy trend of the Canadian federal government, which is the funding source for the majority of the research performed at TRIUMF. In TRIUMF's case, however, the initiative and funding for the commercialization office came from the provincial, or local government. This paper will describe the evolution of technology transfer at the TRIUMF facility, identifying the theory, policies and practical procedures that have been developed and followed. It will also include TRIUMF's experiences in finding exploitable technologies, protecting those technologies, and locating and linking with suitable industry partners to commercialize the technologies. There will be a discussion of resource allocation, and how TRIUMF has endeavoured to establish a portfolio of projects of assorted risks and expected returns. (author). 15 refs

  19. Technology and environmental pollution

    Energy Technology Data Exchange (ETDEWEB)

    Himi, Yasuji (Japan Environmental Sanitation Center, Kawasaki, (Japan))

    1989-07-01

    The history of environmental pollution changed with development of industrial technology and the facts that new technology always generated new pollution are explained, and necessity of Total Emission Control is emphasized. As the actual facts, those were introduced that the hydrogen chloride hazard at the initial stage of alkaline industry with the important meaning of ammonia-soda process as the solution of it, dust hazard by cement industry at its beginning in Japan and Cottrell precipitator technology for its solution, various hazards accompanied with metal refining industry. Discrepancy of view points between production technology and environmental science are explained and importance of technology belonging to the boundary domain between them was emphasized. However, it was indicated that present solutions were depend upon recovery technology and had a possibility to generate new pollution by recovered materials. For the reason, necessity of study on the interaction among chemical industries was proposed from the view of solution for byproduct with environmental pollution problem. 48 refs., 2 figs.

  20. Political construction of technology

    International Nuclear Information System (INIS)

    Bruheze, A.A.A. de la.

    1992-01-01

    In the 1970s radioactive waste disposal became a controversial scientific and social issue in the United States, after the US Atomic Energy Commission (AEC) charged with the development, regulation and promotion of nuclear technology, had tried to implement its disposal technology near Lyons, Kansas. This study traces the emergence of this controversy as part of the long-term development of the US radioactive waste disposal technology. Radioactive waste was not always considered a problem, and different meanings were attached to radwaste in the 1940s and early 1950s. Problem definitions and technical designs that underlaid this technology can be reconstructed, and its possible to show how some definitions received attention and others not, and how some became, and remained, dominant. During the process of problem definition, views compete, agendas are built, resources are allocated, and boundaries are created and maintained between 'inside' and 'outside world'. This is a political process, and by heuristically using concepts from political science and recent technology studies, the Political Construction of US radioactive waste disposal technologically can be reconstructed. (author). 301 refs.; 3 figs.; 15 tabs

  1. SCIENCE AND TECHNOLOGY PARKS

    Directory of Open Access Journals (Sweden)

    Miroslav Milutinović

    2014-04-01

    Full Text Available The establishment of science and technology parks is necessarily accompanied by the establishment of a base of professional staff as the foundation of the park and the base of the potential management that will manage the park and the professional staff. Science and Technology Park is a broader term used to describe a variety of attempts directed at enhancing the entrepreneurship development by means of establishing knowledge – based, small and medium-sized enterprises. The enterprise at the top of the technology pyramid receives support in the form of capital, administration, space and access to new information technologies. The overall objective of the development of industrial enterprises in the technology park is the introduction of economically profitable production with the efficient usage of nonrenewable resources and the application of the highest environmental standards. Achieving the primary developmental objective of the Technology Park includes: creating a favorable business atmosphere in the local community, attractive to both foreign and domestic investors – providing support to the establishment of small and medium-sized enterprises using different models of joint ventures and direct foreign investment.

  2. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Loken, S.C. [ed.

    1993-01-01

    The emphasis in Information Technology (IT) development has shifted from technology management to information management, and the tools of information management are increasingly at the disposal of end-users, people who deal with information. Moreover, the interactive capabilities of technologies such as hypertext, scientific visualization, virtual reality, video conferencing, and even database management systems have placed in the hands of users a significant amount of discretion over how these resources will be used. The emergence of high-performance networks, as well as network operating systems, improved interoperability, and platform independence of applications will eliminate technical barriers to the use of data, increase the power and range of resources that can be used cooperatively, and open up a wealth of possibilities for new applications. The very scope of these prospects for the immediate future is a problem for the IT planner or administrator. Technology procurement and implementation, integration of new technologies into the existing infrastructure, cost recovery and usage of networks and networked resources, training issues, and security concerns such as data protection and access to experiments are just some of the issues that need to be considered in the emerging IT environment. As managers we must use technology to improve competitiveness. When procuring new systems, we must take advantage of scalable resources. New resources such as distributed file systems can improve access to and efficiency of existing operating systems. In addition, we must assess opportunities to improve information worker productivity and information management through tedmologies such as distributed computational visualization and teleseminar applications.

  3. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, D.F. [ed.

    1992-01-01

    This year`s Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

  4. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, D.F. (ed.)

    1992-01-01

    This year's Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

  5. Turbine imaging technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Moursund, R. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carlson, T. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2004-12-01

    The goal of this project was to identify and evaluate imaging technologies for observing juvenile fish within a Kaplan turbine, and specifically that would enable scientists to determine mechanisms of fish injury within an operating turbine unit. This report documents the opportunities and constraints for observing juvenile fish at specific locations during turbine passage. These observations were used to make modifications to dam structures and operations to improve conditions for fish passage while maintaining or improving hydropower production. The physical and hydraulic environment that fish experience as they pass through the hydroelectric plants were studied and the regions with the greatest potential for injury were defined. Biological response data were also studied to determine the probable types of injuries sustained in the turbine intake and what types of injuries are detectable with imaging technologies. The study grouped injury-causing mechanisms into two categories: fluid (pressure/cavitation, shear, turbulence) and mechanical (strike/collision, grinding/pinching, scraping). The physical constraints of the environment, together with the likely types of injuries to fish, provided the parameters needed for a rigorous imaging technology evaluation. Types of technology evaluated included both tracking and imaging systems using acoustic technologies (such as sonar and acoustic tags) and optic technologies (such as pulsed-laser videography, which is high-speed videography using a laser as the flash). Criteria for determining image data quality such as frame rate, target detectability, and resolution were used to quantify the minimum requirements of an imaging sensor.

  6. Technology and Poultry Welfare

    Science.gov (United States)

    Ben Sassi, Neila; Averós, Xavier; Estevez, Inma

    2016-01-01

    Consideration of animal welfare is essential to address the consumers’ demands and for the long term sustainability of commercial poultry. However, assessing welfare in large poultry flocks, to be able to detect potential welfare risks and to control or minimize its impact is difficult. Current developments in technology and mathematical modelling open new possibilities for real-time automatic monitoring of animal welfare and health. New technological innovations potentially adaptable to commercial poultry are appearing, although their practical implementation is still being defined. In this paper, we review the latest technological developments with potential to be applied to poultry welfare, especially for broiler chickens and laying hens. Some of the examples that are presented and discussed include the following: sensors for farm environmental monitoring, movement, or physiological parameters; imaging technologies such as optical flow to detect gait problems and feather pecking; infrared technologies to evaluate birds’ thermoregulatory features and metabolism changes, that may be indicative of welfare, health and management problems. All these technologies have the potential to be implemented at the commercial level to improve birds’ welfare and to optimize flock management, therefore, improving the efficiency of the system in terms of use of resources and, thus, long term sustainability. PMID:27727169

  7. Nuclear Reactors and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Cason, D.L.; Hicks, S.C. [eds.

    1992-01-01

    This publication Nuclear Reactors and Technology (NRT) announces on a monthly basis the current worldwide information available from the open literature on nuclear reactors and technology, including all aspects of power reactors, components and accessories, fuel elements, control systems, and materials. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency`s Energy Technology Data Exchange or government-to-government agreements. The digests in NRT and other citations to information on nuclear reactors back to 1948 are available for online searching and retrieval on the Energy Science and Technology Database and Nuclear Science Abstracts (NSA) database. Current information, added daily to the Energy Science and Technology Database, is available to DOE and its contractors through the DOE Integrated Technical Information System. Customized profiles can be developed to provide current information to meet each user`s needs.

  8. Art : accessible, renewable technology

    International Nuclear Information System (INIS)

    Middleton, C.D.

    2004-01-01

    This paper focuses on the role of non-governmental organization (NGO) citizen groups in Ontario in the use and production of electricity. NGOs have the potential to act both directly on their own accord, and indirectly by pressuring government and others. Current demand for electricity is divided between industrial, commercial and residential users. Citizens have an important role to play in reducing energy demand. On the supply side, there is a revival of interest in renewable energy based on wind, photovoltaic and local-hydro technologies as a result of the escalating environmental and economic costs of coal and nuclear generation. However, citizen groups have greater interest and enthusiasm than technical expertise, creating a mismatch between technological solutions and human need or use of them. This paper discusses how this mismatch applies to renewable-energy technologies, many of which are not especially user-friendly, or accessible. While alternative technologies are increasingly welcomed by government, industry is developing a large and growing array of technological devices. In between this is the citizen, who, despite keen interest, can be overwhelmed by the complexity of the situation. This paper links the theoretical perspective to the real world with a discussion of the dynamics between people and renewable energy in citizen groups and makes particular reference to one group, Citizens for Renewable Energy, that has been making renewable energy technology more accessible to its members for over a decade

  9. The technology vicinity: a location based view on technology

    OpenAIRE

    Steenhuis, H.J.; de Bruijn, E.J.; Kocaoglu, D.F.; Anderson, T.R.

    2001-01-01

    The issue of technology transfer has been viewed from many different perspectives. In this case the focus is on the process of (production) technology transfer. One of the difficulties in studying international technology transfer is the definition of technology. The many technology definitions that exist are either too ‘loosely’ formulated or they require thorough expert knowledge. This results in difficulties with measuring technology and comparing different studies meaningfully. This study...

  10. Technology Acceptance of Augmented Reality and Wearable Technologies

    OpenAIRE

    Wild, Fridolin; Klemke, Roland; Lefrere, Paul; Fominykh, Mikhail; Kuula, Timo

    2017-01-01

    Augmented Reality and Wearables are the recent media and computing technologies, similar, but different from established technologies, even mobile computing and virtual reality. Numerous proposals for measuring technology acceptance exist, but have not been applied, nor fine-tuned to such new technology so far. Within this contribution, we enhance these existing instruments with the special needs required for measuring technology acceptance of Augmented Reality and Wearable Technologies and w...

  11. NATIONAL TECHNOLOGICAL INITIATIVE: EVALUATION OF PERSPECTIVES OF RUSSIA'S TECHNOLOGICAL LEADERSHIP

    OpenAIRE

    N. G. Kurakova; A. N. Petrov

    2015-01-01

    There were analysed scientific-technological solutions which are suggested to be included in the National Technological Initiative «New Production technologies» (NSI-NPT). Considering that Russian President set a target to become a technological leader and conquer the noticeable niches of global products and services markets using technologies, the attention has been drawn to the fact that readiness to influence markets of high-technological products is defined by the shares of patents, recei...

  12. Trusted Computing Technologies, Intel Trusted Execution Technology.

    Energy Technology Data Exchange (ETDEWEB)

    Guise, Max Joseph; Wendt, Jeremy Daniel

    2011-01-01

    We describe the current state-of-the-art in Trusted Computing Technologies - focusing mainly on Intel's Trusted Execution Technology (TXT). This document is based on existing documentation and tests of two existing TXT-based systems: Intel's Trusted Boot and Invisible Things Lab's Qubes OS. We describe what features are lacking in current implementations, describe what a mature system could provide, and present a list of developments to watch. Critical systems perform operation-critical computations on high importance data. In such systems, the inputs, computation steps, and outputs may be highly sensitive. Sensitive components must be protected from both unauthorized release, and unauthorized alteration: Unauthorized users should not access the sensitive input and sensitive output data, nor be able to alter them; the computation contains intermediate data with the same requirements, and executes algorithms that the unauthorized should not be able to know or alter. Due to various system requirements, such critical systems are frequently built from commercial hardware, employ commercial software, and require network access. These hardware, software, and network system components increase the risk that sensitive input data, computation, and output data may be compromised.

  13. Environmental science and technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    The Program on Environmental Science and Technology developed at the Chemical and Environmental Technology Center comprehends environmental chemistry (water, soil and atmospheric chemistry), clean technologies (desulfurization of diesel and oil, biodegradable polymers and structural modification of polymers, recycling, pyrolysis of dangerous chemicals by molten salt technology), nanotechnology (magnetic nanoparticles, dendrimers, nano biomarkers, catalysts) and chemical characterization of nuclear fuel and nuclear fuel cycle waste (chemical and isotopic characterization). The Chemical and Environmental Technology Center was established in 1995, as an evolution of the former Department of Chemistry Engineering (1970). The program on environment science and technology was structured as consequence of the continuous growth of environmental activities on areas related to nuclear programs of IPEN. Moreover, it was an answer to the society concerning the climate changes and biodiversity preservation. All activities of research and development, services, supervision of graduate and under graduated students and courses performance at the center were related to the development, improvement and establishment of new technologies. The highlights of this period (2011 - 2013) were: - Development and use of modern analytical technology for the characterization of persistent pollutants and endocrine disrupters (metals, PAHA’s, PCBs, Pesticides, hormones, surfactants, plasticizer and human pharmaceuticals) in order to evaluate water quality and/or sediments; - Atmospheric chemistry and greenhouse gases: Evaluating an estimation of surface trace gas fluxes from aircraft measurements above the Amazon; - Cooperation with SABESP (Water and Sewage Company) and CETESB (State Environment Agency) in program for the development of public policies; - Studies and development in biodegradable polymers, polyolefins and advanced methods for polymer and rubber recycling and re-use; - Studies

  14. Environmental science and technology

    International Nuclear Information System (INIS)

    2014-01-01

    The Program on Environmental Science and Technology developed at the Chemical and Environmental Technology Center comprehends environmental chemistry (water, soil and atmospheric chemistry), clean technologies (desulfurization of diesel and oil, biodegradable polymers and structural modification of polymers, recycling, pyrolysis of dangerous chemicals by molten salt technology), nanotechnology (magnetic nanoparticles, dendrimers, nano biomarkers, catalysts) and chemical characterization of nuclear fuel and nuclear fuel cycle waste (chemical and isotopic characterization). The Chemical and Environmental Technology Center was established in 1995, as an evolution of the former Department of Chemistry Engineering (1970). The program on environment science and technology was structured as consequence of the continuous growth of environmental activities on areas related to nuclear programs of IPEN. Moreover, it was an answer to the society concerning the climate changes and biodiversity preservation. All activities of research and development, services, supervision of graduate and under graduated students and courses performance at the center were related to the development, improvement and establishment of new technologies. The highlights of this period (2011 - 2013) were: - Development and use of modern analytical technology for the characterization of persistent pollutants and endocrine disrupters (metals, PAHA’s, PCBs, Pesticides, hormones, surfactants, plasticizer and human pharmaceuticals) in order to evaluate water quality and/or sediments; - Atmospheric chemistry and greenhouse gases: Evaluating an estimation of surface trace gas fluxes from aircraft measurements above the Amazon; - Cooperation with SABESP (Water and Sewage Company) and CETESB (State Environment Agency) in program for the development of public policies; - Studies and development in biodegradable polymers, polyolefins and advanced methods for polymer and rubber recycling and re-use; - Studies

  15. Wind Technologies & Evolving Opportunities (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Robichaud, R.

    2014-07-01

    This presentation covers opportunities for wind technology; wind energy market trends; an overview of the National Wind Technology Center near Boulder, Colorado; wind energy price and cost trends; wind turbine technology improvements; and wind resource characterization improvements.

  16. Ceramic Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Ceramic Technology Project was developed by the USDOE Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the USDOE and NASA advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. These programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. A five-year project plan was developed with extensive input from private industry. In July 1990 the original plan was updated through the estimated completion of development in 1993. The objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities.

  17. IT-BT convergence technology

    International Nuclear Information System (INIS)

    2012-12-01

    This book explains IT-BT convergence technology as the future technology, which includes a prolog, easy IT-BT convergence technology that has infinite potentials for new value, policy of IT-BT convergence technology showing the potential of smart Korea, IT-BT convergence opening happy future, for the new future of IT powerful nation Korea with IT-BT convergence technology and an epilogue. This book reveals the conception, policy, performance and future of IT-BT convergence technology.

  18. History of science and technology

    International Nuclear Information System (INIS)

    Jang, Byeong Ju

    1986-04-01

    This book shows origin of technology and development of civilization, origin of science and dissemination of ironware, accumulation of science and technology in the Middle Age society, the era of the Renaissance and science, factory-made manual industry and mechanistic nature view, the era of scientific enlightenment, industrial revolution, science and technology of Korea, formation of modern science and technology, modern technology and approach to science and technology, science and technology in the twenty century such as biochemistry and physics, and cooperation of science and technology.

  19. Nuclear technology and societal needs

    International Nuclear Information System (INIS)

    2004-11-01

    This volume aims to review the present status of development of nuclear technologies and their applications in the country and also to make projections for future requirements. This will also cover state-of-the-art technologies in these areas. The following topics are covered in detail: nuclear technologies for water desalination, water resources development and management using nuclear technology, industrial applications of isotopes and radiation technology, radiation technology in health care, nuclear technology for food preservation, agricultural applications of nuclear technology. Papers relevant to INIS are indexed separately

  20. Space Technology Research Grants Program

    Data.gov (United States)

    National Aeronautics and Space Administration — The Space Technology Research Grants Program will accelerate the development of "push" technologies to support the future space science and exploration...

  1. Energetics Manufacturing Technology Center (EMTC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Energetics Manufacturing Technology Center (EMTC), established in 1994 by the Office of Naval Research (ONR) Manufacturing Technology (ManTech) Program, is Navy...

  2. Technologies for lake restoration

    Directory of Open Access Journals (Sweden)

    Helmut KLAPPER

    2003-09-01

    Full Text Available Lakes are suffering from different stress factors and need to be restored using different approaches. The eutrophication remains as the main water quality management problem for inland waters: both lakes and reservoirs. The way to curb the degradation is to stop the nutrient sources and to accelerate the restoration with help of in-lake technologies. Especially lakes with a long retention time need (eco- technological help to decrease the nutrient content in the free water. The microbial and other organic matter from sewage and other autochthonous biomasses, causes oxygen depletion, which has many adverse effects. In less developed countries big reservoirs function as sewage treatment plants. Natural aeration solves problems only partly and many pollutants tend to accumulate in the sediments. The acidification by acid rain and by pyrite oxidation has to be controlled by acid neutralizing technologies. Addition of alkaline chemicals is useful only for soft waters, and technologies for (microbial alkalinization of very acidic hardwater mining lakes are in development. The corrective measures differ from those in use for eutrophication control. The salinization and water shortage mostly occurs if more water is used than available. L. Aral, L. Tschad, the Dead Sea or L. Nasser belong to waters with most severe environmental problems on a global scale. Their hydrologic regime needs to be evaluated. The inflow of salt water at the bottom of some mining lakes adds to stability of stratification, and thus accumulation of hydrogen sulphide in the monimolimnion of the meromictic lakes. Destratification, which is the most used technology, is only restricted applicable because of the dangerous concentrations of the byproducts of biological degradation. The contamination of lakes with hazardous substances from industry and agriculture require different restoration technologies, including subhydric isolation and storage, addition of nutrients for better self

  3. Diagnostic Technologies in Practice

    Science.gov (United States)

    Steinberg, Malcolm; Kwag, Michael; Chown, Sarah A.; Doupe, Glenn; Trussler, Terry; Rekart, Michael; Gilbert, Mark

    2015-01-01

    Diagnosing HIV-positive gay men through enhanced testing technologies that detect acute HIV infection (AHI) or recent HIV infection provides opportunities for individual and population health benefits. We recruited 25 men in British Columbia who received an acute (n = 13) or recent (n = 12) HIV diagnosis to engage in a longitudinal multiple-methods study over one year or longer. Our thematic analysis of baseline qualitative interviews revealed insights within men’s accounts of technologically mediated processes of HIV discovery and diagnosis. Our analysis illuminated the dialectic of new HIV technologies in practice by considering the relationship between advances in diagnostics (e.g., nucleic acid amplification tests) and the users of these medical technologies in clinical settings (e.g., clients and practitioners). Technological innovations and testing protocols have shifted experiences of learning of one’s HIV-positive status; these innovations have created new diagnostic categories that require successful interpretation and translation to be rendered meaningful, to alleviate uncertainty, and to support public health objectives. PMID:25201583

  4. INFORMATION TECHNOLOGIES IN TRAINING

    Directory of Open Access Journals (Sweden)

    Хамид Абдулович Гербеков

    2017-12-01

    Full Text Available In the modern society one of the main competences of the person is ability quickly and qualitatively to work with information technologies to create and adapt to the tasks electronic resources with use of the modern information technologies. Thus the educational task of formation information competence and the level of information culture conforming to requirements of the modern information society is urgent. Significantly the role of a subject of the information scientist increases in school in connection with increase in a role of process of informatization of society in general and education informatization in particular. Priorities in the maintenance of school course of informatics are redistributed. One of key roles in school course of informatics is played by the “Information technologies” line.In the article is carried out the short review of primary partitions of the informative line “Information technologies” of school course of informatics. The hardware of information technologies, the software of information technologies and means of telecommunications concern them. In article the short analysis of the basic concept on each of these sections is carried out. Besides some methodical recommendations about training in these sections are provided. It is reasonable that elements of fundamental education shall is aware informatics in any technological subject to find the place.

  5. Japan's electronic packaging technologies

    Science.gov (United States)

    Tummala, Rao R.; Pecht, Michael

    1995-01-01

    The JTEC panel found Japan to have significant leadership over the United States in the strategic area of electronic packaging. Many technologies and products once considered the 'heart and soul' of U.S. industry have been lost over the past decades to Japan and other Asian countries. The loss of consumer electronics technologies and products is the most notable of these losses, because electronics is the United States' largest employment sector and is critical for growth businesses in consumer products, computers, automobiles, aerospace, and telecommunications. In the past there was a distinction between consumer and industrial product technologies. While Japan concentrated on the consumer market, the United States dominated the industrial sector. No such distinction is anticipated in the future; the consumer-oriented technologies Japan has dominated are expected to characterize both domains. The future of U.S. competitiveness will, therefore, depend on the ability of the United States to rebuild its technological capabilities in the area of portable electronic packaging.

  6. Technology Roadmap: Energy Storage

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-03-01

    Energy storage technologies are valuable components in most energy systems and could be an important tool in achieving a low-carbon future. These technologies allow for the decoupling of energy supply and demand, in essence providing a valuable resource to system operators. There are many cases where energy storage deployment is competitive or near-competitive in today's energy system. However, regulatory and market conditions are frequently ill-equipped to compensate storage for the suite of services that it can provide. Furthermore, some technologies are still too expensive relative to other competing technologies (e.g. flexible generation and new transmission lines in electricity systems). One of the key goals of this new roadmap is to understand and communicate the value of energy storage to energy system stakeholders. This will include concepts that address the current status of deployment and predicted evolution in the context of current and future energy system needs by using a ''systems perspective'' rather than looking at storage technologies in isolation.

  7. The globalization of technology

    Energy Technology Data Exchange (ETDEWEB)

    Reid, P.P. (National Academy of Engineering, Washington, DC (USA))

    1991-01-01

    The past two decades have seen dramatic change in the distribution and organization of corporate technical activities worldwide. Japan's rapid ascent to the status of technological superpower, the steady rise in technical strength of Europe's leading economies, and the rapid growth in technical competence of an expanding group of newly industrialized nations have put an end to the era of U.S. technological supremacy. Meanwhile, a rapid expansion of private foreign direct investment and a proliferation of international corporate alliances have increased the economic and technological interdependence of industrialized nations. As a result of these changes, the process of technology development, application, and diffusion in a growing number of industries has become increasingly globalized. The following figures document this trend, which will have far-reaching implications for U.S. business practices and federal competitiveness policies. The diagrams address R and D personnel per 10,000 labor force, nondefense R and D spending, high-technology exports, investments in other countries, foreign investment in the United States, and transnational alliances.

  8. Transmutation Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Song, T. Y.; Park, W. S.; Kim, Y. H. (and others)

    2007-06-15

    The spent fuel coming from the PWR is one of the most difficult problems to be solved for the continuous use of nuclear power. It takes a few million years to be safe under the ground. Therefore, it is not easy to take care of the spent fuel for such a long time. Transmutation technology is the key technology which can solve the spent fuel problem basically. Transmutation is to transmute long-lived radioactive nuclides in the spent fuel into short-lived or stable nuclide through nuclear reactions. The long-lived radioactive nuclides can be TRU and fission products such as Tc-99 and I-129. Although the transmutation technology does not make the underground disposal totally unnecessary, the period to take care of the spent fuel can be reduced to the order of a few hundred years. In addition to the environmental benefit, transmutation can be considered to recycle the energy in the spent fuel since the transmutation is performed through nuclear fission reaction of the TRU in the spent fuel. Therefore, transmutation technology is worth being developed in economical aspect. The results of this work can be a basis for the next stage research. The objective of the third stage research was to complete the core conceptual design and verification of the key technologies. The final results will contribute to the establishment of Korean back end fuel cycle policy by providing technical guidelines.

  9. GaAs TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Mustafa TEMİZ

    1995-02-01

    Full Text Available The object of this work is to review the important for the future and the characteristic properties of gallium - arsenide. On this work, a realistic statement of current status of gallium-arsenide technology will provide and for future this will help to realise the enormous possibilities which we believe lie ahead. Gallium-arsenide integrated circuit technology has historically been portrayed as the technology of future. Now although it has not attained the wide complete applicability, it has gradually becoming an accepted and commercially available source of high-speed integrated circuits. High-speed logic circuits fabricated in gallium arsenide have shown promise for applications such as computing and signal processing. The past fifteen-twenty years have seen the emergence of gallium-arsenide technology from laboratuary to the market place. This innovations have been accompanied by dramatic increases in complexity from early single devices to the integrated circuits of considerable complexity for both digital and analogue applications. The aims to lay down sound principles of forthcoming developments in which both the speed and level of the complexity of gallium-arsenide circuits will increase dramatically meeting needs in such as areas as ultra fast computers, personnel communications and new broadcasting technology.

  10. Japan's electronic packaging technologies

    Science.gov (United States)

    Tummala, Rao R.; Pecht, Michael

    1995-02-01

    The JTEC panel found Japan to have significant leadership over the United States in the strategic area of electronic packaging. Many technologies and products once considered the 'heart and soul' of U.S. industry have been lost over the past decades to Japan and other Asian countries. The loss of consumer electronics technologies and products is the most notable of these losses, because electronics is the United States' largest employment sector and is critical for growth businesses in consumer products, computers, automobiles, aerospace, and telecommunications. In the past there was a distinction between consumer and industrial product technologies. While Japan concentrated on the consumer market, the United States dominated the industrial sector. No such distinction is anticipated in the future; the consumer-oriented technologies Japan has dominated are expected to characterize both domains. The future of U.S. competitiveness will, therefore, depend on the ability of the United States to rebuild its technological capabilities in the area of portable electronic packaging.

  11. Applications of aerospace technology in industry. A technology transfer profile: Food technology

    Science.gov (United States)

    Murray, D. M.

    1971-01-01

    Food processing and preservation technologies are reviewed, expected technological advances are considered including processing and market factors. NASA contributions to food technology and nutrition are presented with examples of transfer from NASA to industry.

  12. Multi-technology positioning

    CERN Document Server

    Lohan, Elena-Simona; Wymeersch, Henk; Seco-Granados, Gonzalo; Nykänen, Ossi

    2017-01-01

    This book provides an overview of positioning technologies, applications and services in a format accessible to a wide variety of readers. Readers who have always wanted to understand how satellite-based positioning, wireless network positioning, inertial navigation, and their combinations work will find great value in this book. Readers will also learn about the advantages and disadvantages of different positioning methods, their limitations and challenges. Cognitive positioning, adding the brain to determine which technologies to use at device runtime, is introduced as well. Coverage also includes the use of position information for Location Based Services (LBS), as well as context-aware positioning services, designed for better user experience. • Brings understanding of positioning technology to readers from a variety of disciplines • Reviews multiple techniques, providing insight on the pros, cons and challenges related to each • Designed to be a tutorial on basic principles, avoiding unnecessary de...

  13. Pictures of technology

    International Nuclear Information System (INIS)

    Huber, J.

    1989-01-01

    The first part of the book describes the development of a polarised spectrum of attitudes towards science and technology over the last two decades. Positivistic attitudes that emerged from the materialistic branch of the period of Enlightenment are shown in contrast to the attitudes that stem from the philosophical line of Rousseau-romanticism-vitalism. The second part of the book presents the results of an empirical study, providing evidence for the existence of the different attitudes towards technology and the environment. The study is based on a representative opinion poll among civil servants, engineering professions, social workers, and artists. Engineers and social workers are shown to represent the two antipodes in terms of the 'dual-culture' theory. In addition, sex-specific and age-specific differences are explained, and the different pictures of technology drawn by personalities characterised by an attitude of active control in contrast to those characterised by an attitude of intuitive faith. (orig.) [de

  14. Fusion technology programme

    International Nuclear Information System (INIS)

    Finken, D.

    1984-10-01

    The KfK-Association has continued work on 17 R and D contracts of the Fusion Technology Programme. An effort of 94 manyears per year is at present contributed by 10 KfK departments, covering all aereas defined in the Fusion Technology Programme. The dominant part of the work is directed towards the need of the NET design or supporting experiments. Some additional effort addresses long term technological issues and system studies relevant to DEMO or confinement schemes alternative to tokamaks. Direct contribution to the NET team has increased by augmentation of NET study contracts and delegation of personnel, three KfK delegates being at present members of the NET team. In reverse, specifications and design guidelines worked out by NET have started to have an impact on the current R and D-work in the laboratory. (orig./GG)

  15. Metalcasting Industry Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1998-01-01

    The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry. The Roadmap outlines key goals for products and markets, materials technology, manufacturing technology, environmental technology, human resources, and industry health programs. The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry. The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry.

  16. Technology or Process First?

    DEFF Research Database (Denmark)

    Siurdyban, Artur Henryk; Svejvig, Per; Møller, Charles

    between them using strategic alignment, Enterprise Systems and Business Process Management theories. We argue that the insights from these cases can lead to a better alignment between process and technology. Implications for practice include the direction towards a closer integration of process......Enterprise Systems Management (ESM) and Business Pro- cess Management (BPM), although highly correlated, have evolved as alternative and mutually exclusive approaches to corporate infrastruc- ture. As a result, companies struggle to nd the right balance between technology and process factors...... in infrastructure implementation projects. The purpose of this paper is articulate a need and a direction to medi- ate between the process-driven and the technology-driven approaches. Using a cross-case analysis, we gain insight into two examples of sys- tems and process implementation. We highlight the dierences...

  17. Drying and energy technologies

    CERN Document Server

    Lima, A

    2016-01-01

    This book provides a comprehensive overview of essential topics related to conventional and advanced drying and energy technologies, especially motivated by increased industry and academic interest. The main topics discussed are: theory and applications of drying, emerging topics in drying technology, innovations and trends in drying, thermo-hydro-chemical-mechanical behaviors of porous materials in drying, and drying equipment and energy. Since the topics covered are inter- and multi-disciplinary, the book offers an excellent source of information for engineers, energy specialists, scientists, researchers, graduate students, and leaders of industrial companies. This book is divided into several chapters focusing on the engineering, science and technology applied in essential industrial processes used for raw materials and products.

  18. Art, Technology and Nature

    DEFF Research Database (Denmark)

    Since 1900, the connections between art and technology with nature have become increasingly inextricable. Through a selection of innovative readings by international scholars, this book presents the first investigation of the intersections between art, technology and nature in post-medieval times....... Transdisciplinary in approach, this volume’s 14 essays explore art, technology and nature’s shifting constellations that are discernible at the micro level and as part of a larger chronological pattern. Included are subjects ranging from Renaissance wooden dolls, science in the Italian art academies, and artisanal...... epistemologies in the followers of Leonardo, to Surrealism and its precursors in Mannerist grotesques and the Wunderkammer, eighteenth-century plant printing, the climate and its artistic presentations from Constable to Olafur Eliasson, and the hermeneutics of bioart. In their comprehensive introduction, editors...

  19. Dynawave froth scrubbing technology

    International Nuclear Information System (INIS)

    McLean, J.E.

    1989-01-01

    The DynaWave family of scrubbers was developed and patented by DuPont in the 1970's and is used extensively within the company. Because the technology was treated as confidential, information about the scrubbers was not published outside of DuPont. In 1986 Monsanto Enviro-Chem was asked to install a Reverse Jet scrubber at DuPont's Burnside spent acid recovery pant to replace an aging spray humidifying tower. Enviro-Chem was impressed with the technology and entered into a licensing agreement with DuPont in late 1987. This paper addresses the application of DynaWave froth scrubbing technology to metallurgical plant process and effluent gas streams. Froth scrubber design principles an sampling results from pilot plant trails on fluid bed roaster off-gas are presented

  20. Technologies in organic farming

    DEFF Research Database (Denmark)

    Lassen, Jesper

    2015-01-01

    (pollution) and consequences for human health. Broader ideas about ecosystems and the recycling of nutrients between the agricultural sector and the urban population are notably absent. On the basis of these findings the paper concludes by discussing the relationship between the consumers’ values that guide...... to phase out their use of conventional manure before 2021. This, however, raises a number of questions about consumers’ acceptance of the alternative technologies that have been proposed to close the nutrient gap. Drawing on qualitative interviews with Danish organic consumers, this paper first discusses...... what, from a consumers perspective, characterizes the technologies consumers associate with organic production. This part of the analysis shows that by and large consumers regard organic technologies as the opposite of conventional farming. Second, consumers’ perceptions of solutions suggested to close...

  1. Small Artifacts - Big Technologies

    DEFF Research Database (Denmark)

    Kreiner, Kristian

    2005-01-01

    The computer IC is the heart of the information and telecommunication technology. It is a tiny artifact, but with incredible organizing powers. We use this physical artifact as the location for studying central problems of the knowledge economy. First, the paper describes the history of chip design...... and the emergence of the technological community involved in designing and manufacturing computer chips. The community is structured in a way that reflects the underlying physical nature silicon and the numerous other materials and chemicals involved. But it also reflects the human agency of defining new projects......, of visioning the liberation from atoms, of committing to travel many detours in the labyrinths of development, and of perceiving and exploring the affordance that new technologies hide. Some of these characteristics are analyzed empirically in a case study of designing a chip for a digitalized hearing...

  2. The technological conception

    International Nuclear Information System (INIS)

    Parrochia, D.

    1998-01-01

    The 'technological conception' examines how a project can be concretized or how it is possible to 'conceive', i.e. to produce operative ideas that can be directly use. The first part of this book, called 'concepts and methods', analyzes the logics of conceiving and its philosophy in the construction of its objects and in the management of its programs or projects. The second part is devoted to some exemplary technologies: roads, tunnels, bridges, dams, nuclear power plants, aerospace constructions, and analyzes different concrete logics of technological conception. Finally, the author shows how todays conception faces the risks and complexity increase of systems and considers the possibility of an entirely automated manufacturing shop in the future. (J.S.)

  3. Technology transfer 1995

    Energy Technology Data Exchange (ETDEWEB)

    1995-01-01

    Technology Transfer 1995 is intended to inform the US industrial and academic sectors about the many opportunities they have to form partnerships with the US Department of Energy (DOE) for the mutual advantage of the individual institutions, DOE, and the nation as a whole. It also describes some of the growing number of remarkable achievements resulting from such partnerships. These partnership success stories offer ample evidence that Americans are learning how to work together to secure major benefits for the nation--by combining the technological, scientific, and human resources resident in national laboratories with those in industry and academia. The benefits include more and better jobs for Americans, improved productivity and global competitiveness for technology-based industries, and a more efficient government laboratory system.

  4. Uranium extraction technology

    International Nuclear Information System (INIS)

    1993-01-01

    In 1983 the Nuclear Energy Agency of the Organisation for Economic Co-operation and Development (OECD/NEA) and the IAEA jointly published a book on Uranium Extraction Technology. A primary objective of this report was to document the significant technological developments that took place during the 1970s. The purpose of this present publication is to update and expand the original book. It includes background information about the principle of the unit operations used in uranium ore processing and summarizes the current state of the art. The publication also seeks to preserve the technology and the operating 'know-how' developed over the past ten years. This publication is one of a series of Technical Reports on uranium ore processing that have been prepared by the Division of Nuclear Fuel Cycle and Waste Management at the IAEA. A complete list of these reports is included as an addendum. Refs, figs and tabs

  5. Technology Roadmap: Hydropower

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    Hydropower could double its contribution by 2050, reaching 2,000 GW of global capacity and over 7,000 TWh. This achievement, driven primarily by the quest of clean electricity, could prevent annual emissions of up to 3 billion tonnes of CO2 from fossil-fuel plants. The bulk of this growth would come from large plants in emerging economies and developing countries. Hydroelectricity’s many advantages include reliability, proven technology, large storage capacity, and very low operating and maintenance costs. Hydropower is highly flexible, a precious asset for electricity network operators, especially given rapid expansion of variable generation from other renewable energy technologies such as wind power and photovoltaics. Many hydropower plants also provide flood control, irrigation, navigation and freshwater supply. The technology roadmap for Hydropower details action needed from policy makers to allow hydroelectric production to double, and addresses necessary conditions, including resolving environmental issues and gaining public acceptance.

  6. Technology and testing.

    Science.gov (United States)

    Quellmalz, Edys S; Pellegrino, James W

    2009-01-02

    Large-scale testing of educational outcomes benefits already from technological applications that address logistics such as development, administration, and scoring of tests, as well as reporting of results. Innovative applications of technology also provide rich, authentic tasks that challenge the sorts of integrated knowledge, critical thinking, and problem solving seldom well addressed in paper-based tests. Such tasks can be used on both large-scale and classroom-based assessments. Balanced assessment systems can be developed that integrate curriculum-embedded, benchmark, and summative assessments across classroom, district, state, national, and international levels. We discuss here the potential of technology to launch a new era of integrated, learning-centered assessment systems.

  7. Fusion technology 1992

    International Nuclear Information System (INIS)

    Ferro, C.; Gasparatto, M.; Knoepfel, H.

    1993-01-01

    The aim of the biennial series of symposia on the title subject, organized by the European Fusion Laboratories, is the exchange of information on the design, construction and operation of fusion experiments and on the technology being developed for the next step devices and fusion reactors. The coverage of the volume includes the technological aspects of fusion reactors in relation to new developments, this forming a guideline for the definition of future work. These proceedings comprise three volumes and contain both the invited lectures and contributed papers presented at the symposium which was attended by 569 participants from around the globe. The 343 papers, including 12 invited papers, characterize the increasing interest of industry in the fusion programme, giving a broad and current overview on the progress and trends fusion technology is experiencing now, as well as indicating the future for fusion devices

  8. Ethics and technology design

    DEFF Research Database (Denmark)

    Albrechtslund, Anders

    2007-01-01

    This article offers a discussion of the connection between technology and values and, specifically, I take a closer look at ethically sound design. In order to bring the discussion into a concrete context, the theory of Value Sensitive Design (VSD) will be the focus point. To illustrate my argument...... concerning design ethics, the discussion involves a case study of an augmented window, designed by the VSD Research Lab, which has turned out to be a potentially surveillance-enabling technology. I call attention to a "positivist problem" that has to do with the connection between the design context......, a design theory must accept that foresight is limited to anticipation rather than prediction. To overcome the positivist problem, I suggest a phenomenological approach to technology inspired by Don Ihde's concept of multistability. This argument, which is general in nature and thus applies to any theory...

  9. Nano technology and applications

    International Nuclear Information System (INIS)

    Takriti, S.

    2015-01-01

    Nano technology is the engineering of functional systems at the molecular scale. This covers both works and concepts that are more advanced. In its original sense, nano technology refers to the projected ability to construct items from the bottom up, using techniques and tools being developed today to make complete high performance products. Development of applications incorporating semiconductor nanoparticles to be used in the next generation of products, such as display technology, lighting, solar cells and biological imaging and others are widely progressives. Progress has been made in using medical applications (Nano medicine) which provided the possibility of delivering drugs to specific cells using nanoparticles. Otherwise, nanoparticles have high surface area to volume ratio, allowing many functional groups to be attached to a nanoparticle, which can seek out and bind to certain tumor cells (cancer). (author)

  10. Airclad fiber laser technology

    DEFF Research Database (Denmark)

    Hansen, Kim P.; Olausson, Christina Bjarnal Thulin; Broeng, Jes

    2008-01-01

    High-power fiber lasers and amplifiers have gained tremendous momentum in the last five years, and many of the traditional manufactures of gas and solid-state lasers are pursuing the attractive fiber-based systems, which are now displacing the old technology in many areas. High-power fiber laser...... systems require specially designed fibers with large cores and good power handling capabilities - requirements that are all met by the airclad fiber technology. In the present paper we go through many of the building blocks needed to build high-power systems and we show an example of a complete airclad...... laser system. We present the latest advancements within airclad fiber technology including a new 70 μm single-mode polarization-maintaining rod-type fiber capable of amplifying to MW power levels. Furthermore we describe the novel airclad based pump combiners and their use in a completely monolithic 350...

  11. Philosophy of Technology Assumptions in Educational Technology Leadership

    Science.gov (United States)

    Webster, Mark David

    2017-01-01

    A qualitative study using grounded theory methods was conducted to (a) examine what philosophy of technology assumptions are present in the thinking of K-12 technology leaders, (b) investigate how the assumptions may influence technology decision making, and (c) explore whether technological determinist assumptions are present. Subjects involved…

  12. How does technological regime affect performance of technology development projects?

    NARCIS (Netherlands)

    Song, Michael; Hooshangi, Soheil; Zhao, Y. Lisa; Halman, Johannes I.M.

    2014-01-01

    In this study, we examine how technological regime affects the performance of technology development projects (i.e., project quality, sales, and profit). Technological regime is defined as the set of attributes of a technological environment where the innovative activities of firms take place.

  13. Advanced Aerodynamic Measurement Technology (Technologies avancees de mesure aerodynamique)

    Science.gov (United States)

    1998-05-01

    Norwegian Defence Research Establ. P.O. Box 25 N-2007 Kjeller - NORWAY Dr. Roque CORRAL Departemento de Mecanica de Fluidos Industria de ...CONFERENCE PROCEEDINGS 601 Advanced Aerodynamic Measurement Technology (Technologies avancees de mesure aerodynamique) Papers presented and discussions...CONFERENCE PROCEEDINGS 601 Advanced Aerodynamic Measurement Technology (Technologies avancees de mesure aerodynamique) Apprcvrc /oi ■■■■- M

  14. Technology Transfer Issues and a New Technology Transfer Model

    Science.gov (United States)

    Choi, Hee Jun

    2009-01-01

    The following are major issues that should be considered for efficient and effective technology transfer: conceptions of technology, technological activity and transfer, communication channels, factors affecting transfer, and models of transfer. In particular, a well-developed model of technology transfer could be used as a framework for…

  15. IGCC technology and demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Palonen, J. [A. Ahlstrom Corporation, Karhula (Finland). Hans Ahlstrom Lab.; Lundqvist, R.G. [A. Ahlstrom Corporation, Helsinki (Finland); Staahl, K. [Sydkraft AB, Malmoe (Sweden)

    1996-12-31

    Future energy production will be performed by advanced technologies that are more efficient, more environmentally friendly and less expensive than current technologies. Integrated gasification combined cycle (IGCC) power plants have been proposed as one of these systems. Utilising biofuels in future energy production will also be emphasised since this lowers substantially carbon dioxide emissions into the atmosphere due to the fact that biomass is a renewable form of energy. Combining advanced technology and biomass utilisation is for this reason something that should and will be encouraged. A. Ahlstrom Corporation of Finland and Sydkraft AB of Sweden have as one part of company strategies adopted this approach for the future. The companies have joined their resources in developing a biomass-based IGCC system with the gasification part based on pressurised circulating fluidized-bed technology. With this kind of technology electrical efficiency can be substantially increased compared to conventional power plants. As a first concrete step, a decision has been made to build a demonstration plant. This plant, located in Vaernamo, Sweden, has already been built and is now in commissioning and demonstration stage. The system comprises a fuel drying plant, a pressurised CFB gasifier with gas cooling and cleaning, a gas turbine, a waste heat recovery unit and a steam turbine. The plant is the first in the world where the integration of a pressurised gasifier with a gas turbine will be realised utilising a low calorific gas produced from biomass. The capacity of the Vaernamo plant is 6 MW of electricity and 9 MW of district heating. Technology development is in progress for design of plants of sizes from 20 to 120 MWe. The paper describes the Bioflow IGCC system, the Vaernamo demonstration plant and experiences from the commissioning and demonstration stages. (orig.)

  16. Nuclear science and technology

    International Nuclear Information System (INIS)

    Daud Mohamad; Abd Khalik Wood; Azali Muhammad; Idris Besar; Jaafar Abdullah; Mohd Tadza Abdul Rahman; Muhammad Lebai Juri; Noriah Mod Ali; Samsurdin Ahamad; Syed Abdul Malik Syed Zain; Zaharudin Ahmad

    2005-01-01

    The Nuclear Science and Technology contains valuable information on many aspects of nuclear sciences and technology particularly, its application in various socio-economic sectors, presented in 26 chapters. In general, the book addresses 5 main subjects, covering the following: 1] Introduction; contains basic information on ionising radiation and radioactivity including the what of ionising radiation is all about, interaction with matter and sources of radiation. 2] Detection and measurements; describes detection system and methods capable of detecting specific type of radiation and exposure rate. The QA/QC aspects are also given due consideration in this segment. 3] Safety and health. Outlines the effects of radiation on man, proper working procedures and the organisational radiation protection programme required in accordance to the Atomic Energy Licensing Act 1984 (Act 304) and its subsidiaries. 4] Techniques and applications; as the nucleus of the book, focussing on the various applications and some success stories; power production (for electricity) and other utilizations from both sealed and unsealed sources used in industry, medical and non-medical sectors for the benefit of mankind. 5] Prospects; provides information on the current situation and status of nuclear technology, and prominent organisations responsible in the development of the technology. The direction and future outlook of the technology are also presented to gauge the position and possible contribution that the nuclear technology can play a significant role for the socio-economic progress and nation, well being. Each, chapter in this book is developed around three pillars - basic principle, equipment and system, techniques and operational aspects - as a backbone of the chapter, to ease the understanding of the readers, step by step. Those dealing, with ionising radiation related matters, be it a researcher, a scientist, a laboratory worker or even a member of the public would find this book

  17. CONVERGENCE OF TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    R. Siriram

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Technology is a catalyst for competitive advantage. However, it is how technology is used that leads to a firm’s improved performance. In this article, an investigative framework is constructed to understand better what strategically drives new technology adoption. The strategic drivers include technology and business strategy alignment, better technology planning and selection of new technologies, the effects on a firm’s culture and climate, links to a firm’s organisational and environmental evolution, and benefits through convergence and collaboration. Using an investigative framework, it is shown how the strategic drivers link to improve a firm’s performance, producing competitive advantage. The investigative framework is tested using structural equation modelling. Various hypotheses are formed, and recommendations for further research are made.

    AFRIKAANSE OPSOMMING: Tegnologie is ‘n katalisator vir mededingende voordeel. Dit is egter hoe tegnologie aangewend word wat aanleiding gee tot ‘n onderneming se verbeterde prestasie. In hierdie artikel word ‘n ondersoekende raamwerk gekonstrueer om insig te kry in dit wat die aanvaarding van nuwe tegnologie strategies dryf. Die strategiese dryfvere sluit in die belyning van tegnologie en ondernemingstrategie, beter tegnologiebeplanning en seleksie van nuwe tegnologieë, die effek op ‘n onderneming se kultuur en klimaat, koppeling na ‘n onderneming se organisatoriese en omgewingsevolusie, en voordele verkry deur konvergensie en samewerking. Deur ‘n ondersoekende raamwerk te gebruik, word daar getoon dat die strategiese dryfvere koppel om ‘n onderneming se prestasie te verbeter en sodoende ‘n mededingende voordeel te skep. Die raamwerk word getoets en hipoteses geformuleer waarna aanbevelings oor verdere navorsing aan die hand gedoen word.

  18. State Technologies Advancement Collaborative

    Energy Technology Data Exchange (ETDEWEB)

    David S. Terry

    2012-01-30

    The U. S. Department of Energy (DOE), National Association of State Energy Officials (NASEO), and Association of State Energy Research and Technology Transfer Institutions (ASERTTI) signed an intergovernmental agreement on November 14, 2002, that allowed states and territories and the Federal Government to better collaborate on energy research, development, demonstration and deployment (RDD&D) projects. The agreement established the State Technologies Advancement Collaborative (STAC) which allowed the states and DOE to move RDD&D forward using an innovative competitive project selection and funding process. A cooperative agreement between DOE and NASEO served as the contracting instrument for this innovative federal-state partnership obligating funds from DOE's Office of Energy Efficiency and Renewable Energy and Office of Fossil Energy to plan, fund, and implement RDD&D projects that were consistent with the common priorities of the states and DOE. DOE's Golden Field Office provided Federal oversight and guidance for the STAC cooperative agreement. The STAC program was built on the foundation of prior Federal-State efforts to collaborate on and engage in joint planning for RDD&D. Although STAC builds on existing, successful programs, it is important to note that it was not intended to replace other successful joint DOE/State initiatives such as the State Energy Program or EERE Special Projects. Overall the STAC process was used to fund, through three competitive solicitations, 35 successful multi-state research, development, deployment, and demonstration projects with an overall average non-federal cost share of 43%. Twenty-two states were awarded at least one prime contract, and organizations in all 50 states and some territories were involved as subcontractors in at least one STAC project. Projects were funded in seven program areas: (1) Building Technologies, (2) Industrial Technologies, (3) Transportation Technologies, (4) Distributed Energy

  19. Energy and technology review

    International Nuclear Information System (INIS)

    Stowers, I.F.; Crawford, R.B.; Esser, M.A.; Lien, P.L.; O'Neal, E.; Van Dyke, P.

    1982-07-01

    The state of the laboratory address by LLNL Director Roger Batzel is summarized, and a breakdown of the laboratory funding is given. The Livermore defense-related committment is described, including the design and development of advanced nuclear weapons as well as research in inertial confinement fusion, nonnuclear ordnance, and particle beam technology. LLNL is also applying its scientific and engineering resources to the dual challenge of meeting future energy needs without degrading the quality of the biosphere. Some representative examples are given of the supporting groups vital for providing the specialized expertise and new technologies required by the laboratory's major research programs

  20. Science and technology

    CERN Document Server

    Chorafas, Dimitris N

    2014-01-01

    The aim of this book is to explore science and technology from the viewpoint of creating new knowledge, as opposed to the reinterpretation of existing knowledge in ever greater but uncertain detail. Scientists and technologists make progress by distinguishing between what they regard as meaningful and what they consider as secondary or unimportant. The meaningful is dynamic; typically, the less important is static. Science and technology have made a major contribution to the culture and to the standard of living of our society. From antiquity to the present day, the most distinguished scientis