WorldWideScience

Sample records for technology objective capstone

  1. Multifaceted Learning Objective Assessment in a Mechanical Engineering Capstone Design Course

    Science.gov (United States)

    Baker, Nicholas S.

    This thesis details multi method research approaches that have been used to study student learning objective instruction and assessment in the mechanical engineering (ME) capstone course at the University of Nevada, Reno (UNR). A primary focus of the research is to evaluate the pilot implementation of a Writing Fellows (WF) program in the ME capstone course, which has been assessed using a variety of techniques. The assessment generally indicates positive results. In particular, students favor the continuation of the program and find it more helpful than group consultations within the University Writing Center (UWC) alone. Self-assessment by the students indicates higher confidence in their communication skills, while preliminary analysis suggests that the writing fellow improved the scores of graded assignments by approximately one-third of a letter grade overall. Assessment efforts also highlight the need for deeper interaction between the WF and engineering faculty. A secondary focus of this research presents a methodology that has been developed and used to analyze how the Accreditation Board for Engineering and Technology's (ABET's) current Criterion 3 Student Outcomes (SOs) have been assessed in UNR's ME capstone class over several academic years. The methodology generally finds levels of ABET SO assessment in agreement with departmental and industry-held expectations for capstone courses at large. Finally, an analysis of student grades in the capstone course finds significant differences across semesters and identifies several potential causes.

  2. 75 FR 9007 - National Science and Technology Council, Committee on Technology Capstone Workshop Risk...

    Science.gov (United States)

    2010-02-26

    ... TECHNOLOGY POLICY National Science and Technology Council, Committee on Technology Capstone Workshop Risk Management Methods & Ethical, Legal, and Societal Implications of Nanotechnology: Public Meeting ACTION... the Nanoscale Science, Engineering, and Technology (NSET) Subcommittee of the Committee on...

  3. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, SWINE WASTE ELECTRIC POWER AND HEAT PRODUCTION--CAPSTONE 30KW MICROTURBINE SYSTEM

    Science.gov (United States)

    Under EPA’s Environmental Technology Verification program, which provides objective and scientific third party analysis of new technology that can benefit the environment, a combined heat and power system was evaluated based on the Capstone 30kW Microturbine developed by Cain Ind...

  4. Building Efficiency Technologies by Tomorrow’s Engineers and Researchers (BETTER) Capstone Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Yee, Shannon

    2017-09-30

    BETTER Capstone supported 29 student project teams consisting of 155 students over two years in developing transformative building energy efficiency technologies through a capstone design experience. Capstone is the culmination of an undergraduate student’s engineering education. Interdisciplinary teams of students spent a semester designing and prototyping a technological solution for a variety building energy efficiency problems. During this experience students utilized the full design process, including the manufacturing and testing of a prototype solution, as well as publically demonstrating the solution at the Capstone Design Expo. As part of this project, students explored modern manufacturing techniques and gained hands-on experience with these techniques to produce their prototype technologies. This research added to the understanding of the challenges within building technology education and engagement with industry. One goal of the project was to help break the chicken-and-egg problem with getting students to engage more deeply with the building technology industry. It was learned however that this industry is less interested in trying innovative new concept but rather interested in hiring graduates for existing conventional building efforts. While none of the projects yielded commercial success, much individual student growth and learning was accomplished, which is a long-term benefit to the public at large.

  5. The association between tolerance for ambiguity and fear of negative evaluation: A study of engineering technology capstone courses

    Science.gov (United States)

    Dubikovsky, Sergey I.

    For many students in engineering and engineering technology programs in the US, senior capstone design courses require students to form a team, define a problem, and find a feasible technical solution to address this problem. Students must integrate the knowledge and skills acquired during their studies at the college or university level. These truly integrative design activities do not have a single "correct" solution. Instead, there is an array of solutions, many of which could be used to achieve the final result. This ambiguity can cause students to experience anxiety during the projects. This study examined the main topics: • To what extent is a social anxiety (measured as fear of negative evaluation) related to tolerance for ambiguity in senior engineering capstone courses? • How does exposure to ambiguity prior to and during capstone courses affect tolerance for ambiguity? The study looked at the standard educational practices to see if they have unintended consequences, such a social anxiety in dealing with ambiguity. Those consequences are highly undesirable because they reduce students' learning. It was hypothesized that the lecture-based approaches that are more common in the first three years of study would not prepare students for self-directed capstone courses because the students would rarely have experienced problem-based learning before. The study used a quantitative approach and examined students' perceptions of their tolerance for ambiguity, and social anxiety before and after their senior capstone design experience. A survey instrument was adapted to measure exposure to ambiguity, which was studied as a potential moderator of the relationship between social anxiety and tolerance for ambiguity. The study indicated that social anxiety, as measured by fear of negative evaluation, does not play a major role in capstone courses. The second finding is that a single course, even if it was administered as a problem-based senior class, failed to

  6. 76 FR 34215 - Notice of Department of Energy-Quadrennial Technology Review Capstone Workshop

    Science.gov (United States)

    2011-06-13

    ... Meeting: The DOE-QTR Capstone Workshop will provide the public an opportunity to offer feedback on the... research & development portfolio, the composition of activities within that portfolio, and approaches to... four ninety minute panels: (1) the Department's mobile portfolio; (2) the Department's...

  7. COMS Day as a Communication Senior Capstone Team Project

    Science.gov (United States)

    Ozley, Raymond R.; Wang, Tiffany R.; Ford, Sherry Greenwood; Hardig, Sally Bennett

    2017-01-01

    Courses: Senior Seminar. Objectives: (1) To provide graduating students a semester-long capstone experience where they can apply communication theories/skills in a professional context. (2) To create a capstone project that contributes to programmatic assessment.

  8. A Service Learning Structural Engineering Capstone Course and the Assessment of Technical and Non-Technical Objectives

    Science.gov (United States)

    Dinehart, David W.; Gross, Shawn P.

    2010-01-01

    The primary role of a civil engineer is to serve the community; thus, it is essential that students understand the impact of engineering projects on, and the context of engineering projects within, society. One goal of an engineering capstone design course should be to mesh the technical knowledge of the discipline with an encompassing engineering…

  9. GSBPP CAPSTONE REVIEW

    Science.gov (United States)

    2016-12-01

    Improvement. Source: Aartsengel & Kurtoglu (2013b) ............................13  Figure 3.  Total Number of GSBPP Capstones ( 547 ). Source: Naval...that the point estimate represents the population parameter. At the time of the project team’s study, there were 547 GSBPP capstones archived in...capstones is an appropriate sample size (see Figure 4). 19 Figure 3. Total Number of GSBPP Capstones ( 547 ). Source: Naval Postgraduate School

  10. Systems Engineering Capstone Marketplace

    Science.gov (United States)

    2016-02-01

    social media ) should be actively pursued. At Stevens we...in a CM project and social media has the potential to broaden the pool of student participants. While it will be critical to manage a relative balance...capstone marketplace projects 2. Marketing the Capstone Marketplace to attract additional sponsors and participating schools 3. Refining

  11. Wiki Technology as a Design Tool for a Capstone Design Course

    Science.gov (United States)

    Hadley, Kevin R.; Debelak, Kenneth A.

    2009-01-01

    Technology is a key component to the net generation's social, study, and professional skills. It is prudent to investigate the applications of new technology in education. In this study, a wiki was incorporated into a senior design course, and its utility was investigated with respect to process design. The results of the study indicate wikis…

  12. Object technology: A white paper

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, S.R.; Arrowood, L.F.; Cain, W.D.; Stephens, W.M.; Vickers, B.D.

    1992-05-11

    Object-Oriented Technology (OOT), although not a new paradigm, has recently been prominently featured in the trade press and even general business publications. Indeed, the promises of object technology are alluring: the ability to handle complex design and engineering information through the full manufacturing production life cycle or to manipulate multimedia information, and the ability to improve programmer productivity in creating and maintaining high quality software. Groups at a number of the DOE facilities have been exploring the use of object technology for engineering, business, and other applications. In this white paper, the technology is explored thoroughly and compared with previous means of developing software and storing databases of information. Several specific projects within the DOE Complex are described, and the state of the commercial marketplace is indicated.

  13. Object technology: A white paper

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, S.R.; Arrowood, L.F.; Cain, W.D.; Stephens, W.M.; Vickers, B.D.

    1992-05-11

    Object-Oriented Technology (OOT), although not a new paradigm, has recently been prominently featured in the trade press and even general business publications. Indeed, the promises of object technology are alluring: the ability to handle complex design and engineering information through the full manufacturing production life cycle or to manipulate multimedia information, and the ability to improve programmer productivity in creating and maintaining high quality software. Groups at a number of the DOE facilities have been exploring the use of object technology for engineering, business, and other applications. In this white paper, the technology is explored thoroughly and compared with previous means of developing software and storing databases of information. Several specific projects within the DOE Complex are described, and the state of the commercial marketplace is indicated.

  14. Exploring object-oriented technologies

    CERN Document Server

    Ramos Pollan, Raul

    2000-01-01

    Object oriented technologies are the corner stone of modern software development. A piece of software is today conceived, constructed and tested as a set of objects interacting with each other, rather than as a large sequential program. OO is present throughout the whole software life cycle allowing for maintainable code re-use, clean design and manageable complexity. OO is also the seed upon which other technologies are being built and deployed, such as distributed computing, component models, open interoperability, etc.This series of three seminars will provide a pragmatic overview on the main ideas behind OO software development and will explain the inner workings of the most outstanding technologies being built on OO, such as UML, CORBA, Component Models, Agent Oriented Computing, Business Objects, etc.

  15. Traditional Geology Field Camp: A capstone course at South Dakota School of Mines and Technology (BHNSFS)

    Science.gov (United States)

    Uzunlar, N.; Lisenbee, A. L.

    2012-12-01

    The Black Hills Natural Sciences Field Station (BHNSFS) has provided field training in geology and geological engineering for more than 40 years, and since the 1980's as a consortium serving five schools with South Dakota School of Mines and Technology as the coordinator. The traditional summer geology field camp is a five week long, intense program aimed to prepare students for subsequent professional geologic experiences. It is delivered from two separate facilities, one in the Black Hills (South Dakota) from a beautiful log lodge along Sand Creek, in eastern Wyoming, and a second from the town of Taskesti along the North Anatolian fault approximately 200 km east of Istanbul, Turkey. At both locations, the courses maintain a strong emphasis on basic field applications, including the use of GPS as a mapping tool in most exercises. The preparation of well-written reports, based on field descriptions supplemented by research on the web or through published documents, is strongly emphasized. Projects at the Black Hills field camp includes mapping of Precambrian basement, Paleozoic stratigraphy, and Laramide Tertiary plutons and structural features as welll as post-Laramide,, faulted continental strata. The popular Taskesti field camp utilizes the diverse geology of the Tethyan realm, as well as the culture and history, of central Turkey (Anatolia). The course is based at a Turkish Government Earthquake Research Center facility along the North Anatolian fault. Students examine and map selected locations across the Izmir-Ankara suture including: 1) Deformed Cretaceous and Tertiary carbonate and clastic strata of the Sakarya micro-continent in a fore-arc basin; 2) Marble and skarn surrounding Eocene, subduction-related granite intruded into a passive margin sequence in the Sivrihisar region of central Anatolia; 3) Faulted and folded Neogene strata in the northern flank of the post-Tethyan, Haymana Basin and the contrasting terrains across the North Anatolian fault (J

  16. The Accounting Capstone Problem

    Science.gov (United States)

    Elrod, Henry; Norris, J. T.

    2012-01-01

    Capstone courses in accounting programs bring students experiences integrating across the curriculum (University of Washington, 2005) and offer unique (Sanyal, 2003) and transformative experiences (Sill, Harward, & Cooper, 2009). Students take many accounting courses without preparing complete sets of financial statements. Accountants not only…

  17. ETV/COMBINED HEAT AND POWER AT A COMMERCIAL SUPERMARKET CAPSTONE 60 KW MICROTURBINE SYSTEM

    Science.gov (United States)

    The Environmental Technology Verification report discusses the technology and performance of the Capstone 60 Microturbine CHP System manufactured by Capstone Microturbine Corporation. This system is a 60 kW electrical generator that puts out 480 v AC at 60 Hz and that is driven b...

  18. ETV/COMBINED HEAT AND POWER AT A COMMERCIAL SUPERMARKET CAPSTONE 60 KW MICROTURBINE SYSTEM

    Science.gov (United States)

    The Environmental Technology Verification report discusses the technology and performance of the Capstone 60 Microturbine CHP System manufactured by Capstone Microturbine Corporation. This system is a 60 kW electrical generator that puts out 480 v AC at 60 Hz and that is driven b...

  19. Capstone Renaissance = Simulation + Interaction + DSS.

    Science.gov (United States)

    Jauch, Lawrence R.; And Others

    1989-01-01

    Reviews the development of integrated business policy and strategic management courses, or capstone courses, in business school curricula. A simulation game is described that incorporates the need for computer literacy, decision support systems (DSS), and interaction to effectively meet the needs for a capstone course. (14 references) (LRW)

  20. Systems Engineering Capstone Marketplace

    Science.gov (United States)

    2017-06-05

    partners and  collaboration .    The project consisted of four phases:  1. Initiating and supporting a fourth and fifth year of Capstone Marketplace projects...complications  associated with  the  collaboration   between  undergraduate  academic  programs  and US DoD sponsors with respect to procedures and processes...Social media outlets (Twitter, Facebook, etc.) will be made available for students to post pictures of progress, teamwork , and final projects. Teams

  1. A national comparison of biochemistry and molecular biology capstone experiences.

    Science.gov (United States)

    Aguanno, Ann; Mertz, Pamela; Martin, Debra; Bell, Ellis

    2015-01-01

    Recognizing the increasingly integrative nature of the molecular life sciences, the American Society for Biochemistry and Molecular Biology (ASBMB) recommends that Biochemistry and Molecular Biology (BMB) programs develop curricula based on concepts, content, topics, and expected student outcomes, rather than courses. To that end, ASBMB conducted a series of regional workshops to build a BMB Concept Inventory containing validated assessment tools, based on foundational and discipline-specific knowledge and essential skills, for the community to use. A culminating activity, which integrates the educational experience, is often part of undergraduate molecular life science programs. These "capstone" experiences are commonly defined as an attempt to measure student ability to synthesize and integrate acquired knowledge. However, the format, implementation, and approach to outcome assessment of these experiences are quite varied across the nation. Here we report the results of a nation-wide survey on BMB capstone experiences and discuss this in the context of published reports about capstones and the findings of the workshops driving the development of the BMB Concept Inventory. Both the survey results and the published reports reveal that, although capstone practices do vary, certain formats for the experience are used more frequently and similarities in learning objectives were identified. The use of rubrics to measure student learning is also regularly reported, but details about these assessment instruments are sparse in the literature and were not a focus of our survey. Finally, we outline commonalities in the current practice of capstones and suggest the next steps needed to elucidate best practices.

  2. Electronics Technology. Performance Objectives. Basic Course.

    Science.gov (United States)

    Campbell, Guy

    Several intermediate performance objectives and corresponding criterion measures are listed for each of 20 terminal objectives for a basic electronics technology course. The materials were developed for a two-semester course (2 hours daily) designed to include instruction in basic electricity and electronic fundamentals, and to develop skills and…

  3. Team-Teaching a Digital Senior Capstone Project in CTE

    Science.gov (United States)

    Ryan, Melanie D.; Tews, Nichole M.; Washer, Barton A.

    2012-01-01

    Secondary career and technical education (CTE) students are faced with the unique challenge of learning not only specific content-related knowledge and skills, but also postsecondary preparation, 21st century technology, employability and self-marketing skills. At Cass Career Center in Harrisonville, Missouri, a senior capstone project was…

  4. Reviews of computing technology: Object-oriented technology

    Energy Technology Data Exchange (ETDEWEB)

    Skeen, D.C.

    1993-03-01

    A useful metaphor in introducing object-oriented concepts is the idea of a computer hardware manufacturer assembling products from an existing stock of electronic parts. In this analogy, think of the parts as pieces of computer software and of the finished products as computer applications. Like its counterpart, the object is capable of performing its specific function in a wide variety of different applications. The advantages to assembling hardware using a set of prebuilt parts are obvious. The design process is greatly simplified in this scenario, since the designer needs only to carry the design down to the chip level, rather than to the transistor level. As a result, the designer is free to develop a more reliable and feature rich product. Also, since the component parts are reused in several different products, the parts can be made more robust and subjected to more rigorous testing than would be economically feasible for a part used in only one piece of equipment. Additionally, maintenance on the resulting systems is simplified because of the part-level consistency from one type of equipment to another. The remainder of this document introduces the techniques used to develop objects, the benefits of the technology, outstanding issues that remain with the technology, industry direction for the technology, and the impact that object-oriented technology is likely to have on the organization. While going through this material, the reader will find it useful to remember the parts analogy and to keep in mind that the overall purpose of object-oriented technology is to create software parts and to construct applications using those parts.

  5. Case Study of a Small Scale Polytechnic Entrepreneurship Capstone Course Sequence

    Science.gov (United States)

    Webster, Rustin D.; Kopp, Richard

    2017-01-01

    A multidisciplinary entrepreneurial senior capstone has been created for engineering technology students at a research I land-grant university statewide extension. The two semester course sequence welcomes students from Mechanical Engineering Technology, Electrical Engineering Technology, Computer Graphics Technology, and Organizational…

  6. Broadcast Journalism Education and the Capstone Experience

    Science.gov (United States)

    Tanner, Andrea; Forde, Kathy Roberts; Besley, John C.; Weir, Tom

    2012-01-01

    This study assesses the current state of the television news capstone experience in accredited journalism and mass communication programs in the United States. Specifically, the authors employed a mixed-methods approach, interviewing 20 television news capstone instructors and conducting an analysis of broadcast journalism curriculum information…

  7. Capstone Course Innovation: Bloomberg Professional Service

    Science.gov (United States)

    Payette, Dennis L.; Libertella, Anthony F.

    2012-01-01

    This paper reports on the introduction of a curricular innovation in a required capstone course: namely the Business Policy and Strategy course in the School of Business at Adelphi University. The curriculum capstone courses have tended to primarily include business related case studies and business simulation exercises. Consequently, curriculum…

  8. Mathematical connections a capstone course

    CERN Document Server

    Conway, John B

    2010-01-01

    This book illustrates connections between various courses taken by undergraduate mathematics majors. As such it can be used as a text for a capstone course. The chapters are essentially independent, and the instructor can choose the topics that will form the course and thus tailor the syllabus to suit the backgrounds and abilities of the students. At the end of such a course the graduating seniors should glimpse mathematics not as a series of independent courses but as something more like an integrated body of knowledge. The book has numerous exercises and examples so that the student has many

  9. RCTA capstone assessment

    Science.gov (United States)

    Lennon, Craig; Bodt, Barry; Childers, Marshal; Dean, Robert; Oh, Jean; DiBerardino, Chip; Keegan, Terence

    2015-05-01

    The Army Research Laboratory's Robotics Collaborative Technology Alliance (RCTA) is a program intended to change robots from tools that soldiers use into teammates with which soldiers can work. This requires the integration of fundamental and applied research in perception, artificial intelligence, and human-robot interaction. In October of 2014, the RCTA assessed progress towards integrating this research. This assessment was designed to evaluate the robot's performance when it used new capabilities to perform selected aspects of a mission. The assessed capabilities included the ability of the robot to: navigate semantically outdoors with respect to structures and landmarks, identify doors in the facades of buildings, and identify and track persons emerging from those doors. We present details of the mission-based vignettes that constituted the assessment, and evaluations of the robot's performance in these vignettes.

  10. Development of Information Technology of Object-relational Databases Design

    Directory of Open Access Journals (Sweden)

    Valentyn A. Filatov

    2012-12-01

    Full Text Available The article is concerned with the development of information technology of object-relational databases design and study of object features infological and logical database schemes entities and connections.

  11. A Multi- and Cross-Disciplinary Capstone Experience in Engineering Art: Animatronic Polar Bear

    Science.gov (United States)

    Sirinterlikci, Arif; Toukonen, Kayne; Mason, Steve; Madison, Russel

    2005-01-01

    An animatronic robot was designed and constructed for the 2003 Annual Student Robotic Technology and Engineering Challenge organized by the Robotics International (RI) association of the Society of Manufacturing Engineers (SME). It was also the senior capstone design project for two of the design team members. After a thorough study of body and…

  12. Building Real World Domain-Specific Social Network Websites as a Capstone Project

    Science.gov (United States)

    Yue, Kwok-Bun; De Silva, Dilhar; Kim, Dan; Aktepe, Mirac; Nagle, Stewart; Boerger, Chris; Jain, Anubha; Verma, Sunny

    2009-01-01

    This paper describes our experience of using Content Management Software (CMS), specifically Joomla, to build a real world domain-specific social network site (SNS) as a capstone project for graduate information systems and computer science students. As Web 2.0 technologies become increasingly important in driving business application development,…

  13. Industrial Sponsor Perspective on Leveraging Capstone Design Projects to Enhance Their Business

    Science.gov (United States)

    Weissbach, Robert S.; Snyder, Joseph W.; Evans, Edward R., Jr.; Carucci, James R., Jr.

    2017-01-01

    Capstone design projects have become commonplace among engineering and engineering technology programs. These projects are valuable tools when assessing students, as they require students to work in teams, communicate effectively, and demonstrate technical competency. The use of industrial sponsors enhances these projects by giving these projects…

  14. Principles and Practices Fostering Inclusive Excellence: Lessons from the Howard Hughes Medical Institute's Capstone Institutions

    Science.gov (United States)

    DiBartolo, Patricia Marten; Gregg-Jolly, Leslie; Gross, Deborah; Manduca, Cathryn A.; Iverson, Ellen; Cooke, David B., III; Davis, Gregory K.; Davidson, Cameron; Hertz, Paul E.; Hibbard, Lisa; Ireland, Shubha K.; Mader, Catherine; Pai, Aditi; Raps, Shirley; Siwicki, Kathleen; Swartz, Jim E.

    2016-01-01

    Best-practices pedagogy in science, technology, engineering, and mathematics (STEM) aims for inclusive excellence that fosters student persistence. This paper describes principles of inclusivity across 11 primarily undergraduate institutions designated as Capstone Awardees in Howard Hughes Medical Institute's (HHMI) 2012 competition. The Capstones…

  15. Building Real World Domain-Specific Social Network Websites as a Capstone Project

    Science.gov (United States)

    Yue, Kwok-Bun; De Silva, Dilhar; Kim, Dan; Aktepe, Mirac; Nagle, Stewart; Boerger, Chris; Jain, Anubha; Verma, Sunny

    2009-01-01

    This paper describes our experience of using Content Management Software (CMS), specifically Joomla, to build a real world domain-specific social network site (SNS) as a capstone project for graduate information systems and computer science students. As Web 2.0 technologies become increasingly important in driving business application development,…

  16. Can object technology meet health care's programming needs?

    Science.gov (United States)

    McCormack, J

    1997-02-01

    Although object technology is just starting to make inroads in programming for health care applications, some observers predict it will drive information systems into the next century and beyond. Objects technology could play a major role in quicker development of the computer-based patient record and in easing the creation of links between systems.

  17. Where Are We Now? Statistics on Capstone Courses Nationwide

    Science.gov (United States)

    Howe, Susannah

    2010-01-01

    Capstone design courses are an increasingly common component of engineering curricula nationwide, but how much do we really know about the current practices? How do capstone courses differ across departments and institutions? How have capstone courses changed in the past 10 years? This paper highlights data from a survey of engineering capstone…

  18. A Pharmacotherapy Capstone Course to Advance Pharmacy Students’ Clinical Documentation Skills

    OpenAIRE

    Conway, Jeannine M.; Ahmed, Ghada F

    2012-01-01

    Objective. To implement and assess the effectiveness of a capstone pharmacotherapy course designed to integrate in-class curriculum using patient cases and drug-information questions. The course was intended to improve third-year doctor of pharmacy (PharmD) students' clinical documentation skills in preparation for beginning advanced pharmacy practice experiences (APPEs).

  19. ICT Capstone projects: The edge of chaos

    Directory of Open Access Journals (Sweden)

    Sue Chard

    Full Text Available Capstone project processes and assessment methodologies continue to be problematic. Experience has led us to review our assessment rubrics and methods with every iteration in an attempt to refine and improve the practice and outcomes. This review has surveyed a broad range of capstone projects describing approaches to practice, assessment and sizing. In their widest sense capstone projects are described as being ambiguous and complex, tantamount, as the title of this paper implies, to artfully practising as if one is \\'on the edge of chaos.\\' There have been promising taxonomies mooted or developed to give insight into evidence of the skills, practice, knowledge and understanding associated with capstone projects. There appears to be, however, a dilemma in terms of creating a succinct vision that might inform the sizing and assessment of projects and enable us to capture its ephemeral nature. Complexity theory appears to go some way towards unpacking relevant factors which could inform the development of tools for assessment and sizing of projects. There are professional heuristics employed in the sizing of projects and standards for the assessment of capstone projects. From this review it can be seen that a fluid but accurate methodology should be developed which addresses the dilemma in such a way as to provide robust conceptual, pedagogical and sociological sizing and assessment practices.

  20. Improved Technologies for Decontamination of Crated Large Metal Objects

    Energy Technology Data Exchange (ETDEWEB)

    McFee, J.; Barbour, K.; Stallings, E.

    2003-02-25

    The Los Alamos Large Scale Demonstration and Deployment Project (LSDDP) in support of the US Department of Energy (DOE) Deactivation and Decommissioning Focus Area (DDFA) has been identifying and demonstrating technologies to reduce the cost and risk of management of transuranic element contaminated large metal objects, i.e. gloveboxes. DOE must dispose of hundreds of gloveboxes from Rocky Flats Environmental Technology Site (RFETS), Los Alamos National Laboratory (LANL), and other DOE sites. This paper reports on the results of four technology demonstrations on decontamination of plutonium contaminated gloveboxes with each technology compared to a common baseline technology, wipedown with nitric acid.

  1. Interviewing Objects: Including Educational Technologies as Qualitative Research Participants

    Science.gov (United States)

    Adams, Catherine A.; Thompson, Terrie Lynn

    2011-01-01

    This article argues the importance of including significant technologies-in-use as key qualitative research participants when studying today's digitally enhanced learning environments. We gather a set of eight heuristics to assist qualitative researchers in "interviewing" technologies-in-use (or other relevant objects), drawing on concrete…

  2. Interviewing Objects: Including Educational Technologies as Qualitative Research Participants

    Science.gov (United States)

    Adams, Catherine A.; Thompson, Terrie Lynn

    2011-01-01

    This article argues the importance of including significant technologies-in-use as key qualitative research participants when studying today's digitally enhanced learning environments. We gather a set of eight heuristics to assist qualitative researchers in "interviewing" technologies-in-use (or other relevant objects), drawing on concrete…

  3. Capstone Portfolios and Geography Student Learning Outcomes

    Science.gov (United States)

    Mossa, Joann

    2014-01-01

    Due to increasing demands regarding student learning outcomes and accreditation, a capstone portfolio was added to assess critical thinking and communication skills of geography majors at a large public university in the USA. The portfolio guidelines were designed to be adaptable to a flexible curriculum where about half of the requirements within…

  4. Capstone Engineering Design Projects for Community Colleges

    Science.gov (United States)

    Walz, Kenneth A.; Christian, Jon R.

    2017-01-01

    Capstone engineering design courses have been a feature at research universities and four-year schools for many years. Although such classes are less common at two-year colleges, the experience is equally beneficial for this population of students. With this in mind, Madison College introduced a project-based Engineering Design course in 2007.…

  5. Development of Capstone Project Attitude Scales

    Science.gov (United States)

    Bringula, Rex P.

    2015-01-01

    This study attempted to develop valid and reliable Capstone Project Attitude Scales (CPAS). Among the scales reviewed, the Modified Fennema-Shermann Mathematics Attitude Scales was adapted in the construction of the CPAS. Usefulness, Confidence, and Gender View were the three subscales of the CPAS. Four hundred sixty-three students answered the…

  6. Robotics Focused Capstone Senior Design Course

    Science.gov (United States)

    Rios-Gutierrez, Fernando; Alba-Flores, Rocio

    2017-01-01

    This work describes the educational experiences gained teaching the Senior Design I & II courses, a senior level, two-semester sequence in the Electrical Engineering (EE) program at Georgia Southern University (GSU). In particular, the authors present their experiences in using robotics as the main area to develop the capstone senior design,…

  7. Capstone Senior Research Course in Economics

    Science.gov (United States)

    Li, Ishuan; Simonson, Robert

    2016-01-01

    In this article, the authors describe the structure and assessment of a capstone course in economics. The outcomes are noteworthy for three reasons. First, among cited evidence to date, this is the only undergraduate economics program from a nonselective public university reporting similar achievements in undergraduate research paper publications.…

  8. A Capstone Course in Applied Sociology.

    Science.gov (United States)

    Wallace, Richard Cheever

    1988-01-01

    Discusses the value of a capstone course in applied sociology as the culmination of the undergraduate sociology curriculum. Points out advantages of joint faculty-student projects for the course and presents the relative merits of two different formats: solo versus team projects. (Author/GEA)

  9. Capstone Senior Research Course in Economics

    Science.gov (United States)

    Li, Ishuan; Simonson, Robert

    2016-01-01

    In this article, the authors describe the structure and assessment of a capstone course in economics. The outcomes are noteworthy for three reasons. First, among cited evidence to date, this is the only undergraduate economics program from a nonselective public university reporting similar achievements in undergraduate research paper publications.…

  10. Development of Capstone Project Attitude Scales

    Science.gov (United States)

    Bringula, Rex P.

    2015-01-01

    This study attempted to develop valid and reliable Capstone Project Attitude Scales (CPAS). Among the scales reviewed, the Modified Fennema-Shermann Mathematics Attitude Scales was adapted in the construction of the CPAS. Usefulness, Confidence, and Gender View were the three subscales of the CPAS. Four hundred sixty-three students answered the…

  11. A Pharmacotherapy Capstone Course to Target Student Learning and Programmatic Curricular Assessment.

    Science.gov (United States)

    Saseen, Joseph J; Linnebur, Sunny A; Borgelt, Laura M; Trujillo, Jennifer; Fish, Douglas N; Mueller, Scott

    2017-04-01

    Objective. To describe how a pharmacotherapy capstone course was used for student learning and programmatic curricular assessment. Design. A pharmacotherapy capstone course was included in the University of Colorado curriculum for 13 years from 2002 through 2014. This 9-credit hour course was the last course prior to Advanced Pharmacy Practice Experiences (APPEs). Students were held accountable for prior learning using complex patient cases and other activities that are seen in APPEs. Application of knowledge, skills, and critical thinking were integrated in this course using exclusively active learning methodologies. Students were expected to actively participate and learn independently, from peers and through self-assessment. Assessment. Evidence of student learning was demonstrated based on student performance on written and verbal evaluations analyzed from 2012 to 2014. Survey and self-evaluation data indicated that students learned within the course. An increase in student confidence in critical thinking, problem-solving, decision making, and lifelong learning was also seen during APPEs. Student performance in this course prompted changes to prerequisite courses and guided development of a renewed curriculum. Conclusion. The University of Colorado pharmacotherapy capstone course prepared students for the rigor of APPEs, provided insight that facilitated improvements in prerequisite courses, and was a nexus for the development of a renewed curriculum, which includes a new clinical capstone course.

  12. Software development with C++ maximizing reuse with object technology

    CERN Document Server

    Nielsen, Kjell

    2014-01-01

    Software Development with C++: Maximizing Reuse with Object Technology is about software development and object-oriented technology (OT), with applications implemented in C++. The basis for any software development project of complex systems is the process, rather than an individual method, which simply supports the overall process. This book is not intended as a general, all-encompassing treatise on OT. The intent is to provide practical information that is directly applicable to a development project. Explicit guidelines are offered for the infusion of OT into the various development phases.

  13. Technology and human issues in reusing learning objects

    NARCIS (Netherlands)

    Collis, Betty; Strijker, Allard

    2004-01-01

    Reusing learning objects is as old as retelling a story or making use of libraries and textbooks, and in electronic form has received an enormous new impetus because of the World Wide Web and Web technologies. Are we at the brink of changing the "shape and form of learning, ... of being able to trul

  14. Technology and Human Issues in Reusing Learning Objects.

    NARCIS (Netherlands)

    Collis, Betty; Strijker, Allard

    2004-01-01

    Reusing learning objects is as old as retelling a story or making use of libraries and textbooks, and in electronic form has received an enormous new impetus because of the World Wide Web and Web technologies. Are we at the brink of changing the "shape and form of learning, ... of being able to trul

  15. Object Authentication Using RFID Technology: A Multi-tag Approach

    Directory of Open Access Journals (Sweden)

    Subhasish Dhal

    2015-03-01

    Full Text Available Authentication is an important requirement in various applications to restrict the non-legitimate access to certain resources. Radio Frequency Identification (RFID technology helps to perform the authentication task. The detection probability of an object during the authentication process can be increased using multiple number of RFID tags in the object. However, many security risks such as eavesdropping, location privacy etc. are involved in this technology. This paper proposes a secure and lightweight authentication scheme assuming the objects are attached with multiple number of RFID tags. Proper analysis has been carried out to evaluate the security of the proposed scheme, including comparison with a few existing schemes in terms of computation, communication and storage requirements.

  16. Research and technology objectives and plans: Summary fiscal year 1991

    Science.gov (United States)

    1991-01-01

    This publication represents the NASA research and technology program for FY 1991. It is a compilation of the Summary portions of each of the RTOP's (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, industry, and in universities. The first section contains citations and abstracts of the RTOP's and is followed by four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP Number.

  17. An international capstone experience for pharmacy students.

    Science.gov (United States)

    Gourley, Dick R; Vaidya, Varun A; Hufstader, Meghan A; Ray, Max D; Chisholm-Burns, Marie A

    2013-04-12

    This report describes the experiences of the University of Tennessee College of Pharmacy over 20 years with an international capstone educational experience for students. Although the university provides reciprocal opportunities to international students, this report focuses on the experiences of the college's pharmacy students who have participated in the program. This capstone course is offered as an elective course in the advanced pharmacy practice experience (APPE) component of the college's experiential program. Goals of the program and a brief description of its organizational structure are provided. Results of a structured student satisfaction survey and a survey covering the most recent 3 years of the program are presented. This program has greatly broadened participants' cultural horizons and expanded their global view and understanding of the contributions of pharmacy to health care.

  18. Submarine Combat Systems Engineering Project Capstone Project

    Science.gov (United States)

    2011-06-06

    Combat Systems Engineering Project Capstone Project by John Becker Denman Sweetman Shaun Cookinham Mark Wasilewski Shawn Goode Samuel D...This report was prepared by: John Becker Denman Sweetman Shaun Cookinham Mark Wasilewski Shawn Goode Samuel D. Winograd David Rhodes...ELEMENT NUMBER 6. AUTHOR(S) John Becker, Shaun Cookinham, Shawn Goode, David Rhodes 5d. PROJECT NUMBER Mark Wasilewski , Samuel Winograd 5e. TASK

  19. Faint spatial object classifier construction based on data mining technology

    Science.gov (United States)

    Lou, Xin; Zhao, Yang; Liao, Yurong; Nie, Yong-ming

    2016-11-01

    Data mining can effectively obtain the faint spatial object's patterns and characteristics, the universal relations and other implicated data characteristics, the key of which is classifier construction. Faint spatial object classifier construction with spatial data mining technology for faint spatial target detection is proposed based on theoretical analysis of design procedures and guidelines in detail. For the one-sidedness weakness during dealing with the fuzziness and randomness using this method, cloud modal classifier is proposed. Simulating analyzing results indicate that this method can realize classification quickly through feature combination and effectively resolve the one-sidedness weakness problem.

  20. Applying Distributed Object Technology to Distributed Embedded Control Systems

    DEFF Research Database (Denmark)

    Jørgensen, Bo Nørregaard; Dalgaard, Lars

    2012-01-01

    In this paper, we describe our Java RMI inspired Object Request Broker architecture MicroRMI for use with networked embedded devices. MicroRMI relieves the software developer from the tedious and error-prone job of writing communication protocols for interacting with such embedded devices. MicroR...... in developing control systems for distributed embedded platforms possessing severe resource restrictions.......RMI supports easy integration of high-level application specific control logic with low-level device specific control logic. Our experience from applying MicroRMI in the context of a distributed robotics control application, clearly demonstrates that it is feasible to use distributed object technology...

  1. The Accounting Undergraduate Capstone: Promoting Synthesis, Reflection, Transition, and Competencies

    Science.gov (United States)

    Johnson, Grace F.; Halabi, Abdel K.

    2011-01-01

    The authors review 24 midwestern institutions that have an undergraduate capstone course. Specifically they focus on accounting capstone courses, discovering that these are used to promote personal and functional skill development in 8 areas: research, problem solving, critical thinking, reflection, synthesis, teamwork, communication, and…

  2. Describing Typical Capstone Course Experiences from a National Random Sample

    Science.gov (United States)

    Grahe, Jon E.; Hauhart, Robert C.

    2013-01-01

    The pedagogical value of capstones has been regularly discussed within psychology. This study presents results from an examination of a national random sample of department webpages and an online survey that characterized the typical capstone course in terms of classroom activities and course administration. The department webpages provide an…

  3. Leadership for Dummies: A Capstone Project for Leadership Students

    Science.gov (United States)

    Moore, Lori L.; Odom, Summer F.; Wied, Lexi M.

    2011-01-01

    Capstone courses in leadership provide students opportunities to synthesize prior knowledge about various aspects of leadership. This article describes the "Leadership for Dummies" project, which could be used as a capstone experience for leadership majors. Based on his experiences as a psychological researcher, Gardner (2008) identified five…

  4. The Accounting Undergraduate Capstone: Promoting Synthesis, Reflection, Transition, and Competencies

    Science.gov (United States)

    Johnson, Grace F.; Halabi, Abdel K.

    2011-01-01

    The authors review 24 midwestern institutions that have an undergraduate capstone course. Specifically they focus on accounting capstone courses, discovering that these are used to promote personal and functional skill development in 8 areas: research, problem solving, critical thinking, reflection, synthesis, teamwork, communication, and…

  5. A Survey of Complex Object Technologies for Digital Libraries

    Science.gov (United States)

    Nelson, Michael L.; Argue, Brad; Efron, Miles; Denn, Sheila; Pattuelli, Maria Cristina

    2001-01-01

    Many early web-based digital libraries (DLs) had implicit assumptions reflected in their architecture that the unit of focus in the DL (frequently "reports" or "e-prints") would only be manifested in a single, or at most a few, common file formats such as PDF or PostScript. DLs have now matured to the point where their contents are commonly no longer simple files. Complex objects in DLs have emerged from in response to various requirements, including: simple aggregation of formats and supporting files, bundling additional information to aid digital preservation, creating opaque digital objects for e-commerce applications, and the incorporation of dynamic services with the traditional data files. We examine a representative (but not necessarily exhaustive) number of current and recent historical web-based complex object technologies and projects that are applicable to DLs: Aurora, Buckets, ComMentor, Cryptolopes, Digibox, Document Management Alliance, FEDORA, Kahn-Wilensky Framework Digital Objects, Metadata Encoding & Transmission Standard, Multivalent Documents, Open eBooks, VERS Encapsulated Objects, and the Warwick Framework.

  6. 2015 Federated Conference on Software Development and Object Technologies

    CERN Document Server

    Kostolny, Jozef; Gratkowski, Tomasz

    2017-01-01

    This book presents the proceedings of the International Conference SDOT which was organized at the University in Žilina, Faculty of Management Sciences and Informatics, Slovak Republic in November 19, 2015. The conference was truly international both in terms of the amount of foreign contributions and in terms of composition of steering and scientific committees. The book and the conference serves as a platform of professional exchange of knowledge and experience for the latest trends in software development and object-oriented technologies (theory and practice). This proceedings present information on the latest developments and mediate the exchange of experience between practitioners and academia. .

  7. High-Speed, Three Dimensional Object Composition Mapping Technology

    Energy Technology Data Exchange (ETDEWEB)

    Ishikawa, M Y

    2001-02-14

    This document overviews an entirely new approach to determining the composition--the chemical-elemental, isotopic and molecular make-up--of complex, highly structured objects, moreover with microscopic spatial resolution in all 3 dimensions. The front cover depicts the new type of pulsed laser system at the heart of this novel technology under adjustment by Alexis Wynne, and schematically indicates two of its early uses: swiftly analyzing the 3-D composition governed structure of a transistor circuit with both optical and mass-spectrometric detectors, and of fossilized dinosaur and turtle bones high-speed probed by optical detection means. Studying the composition-cued 3-D micro-structures of advanced composite materials and the microscopic scale composition-texture of biological tissues are two near-term examples of the rich spectrum of novel applications enabled by this field-opening analytic tool-set.

  8. Digital Microdroplet Ejection Technology-Based Heterogeneous Objects Prototyping

    Directory of Open Access Journals (Sweden)

    Na Li

    2016-01-01

    Full Text Available An integrate fabrication framework is presented to build heterogeneous objects (HEO using digital microdroplets injecting technology and rapid prototyping. The heterogeneous materials part design and manufacturing method in structure and material was used to change the traditional process. The net node method was used for digital modeling that can configure multimaterials in time. The relationship of material, color, and jetting nozzle was built. The main important contributions are to combine the structure, material, and visualization in one process and give the digital model for manufacture. From the given model, it is concluded that the method is effective for HEO. Using microdroplet rapid prototyping and the model given in the paper HEO could be gotten basically. The model could be used in 3D biomanufacturing.

  9. Use of computer technology to modify objective structured clinical examinations.

    Science.gov (United States)

    Holyfield, Lavern J; Bolin, Kenneth A; Rankin, Kathleen V; Shulman, Jay D; Jones, Daniel L; Eden, Becky DeSpain

    2005-10-01

    Objective structured clinical examinations (OSCEs) are multistationed clinical examinations that have been shown to be effective in testing students' ability to integrate the knowledge, skills, and attitudes acquired during their preclinical and clinical training and experiences. The original OSCE for the third-year Preventive Dentistry course at Baylor College of Dentistry was based on the traditional format consisting of four sections of twelve stations with a group of twelve students rotating through each of the sections simultaneously. This arrangement allowed for examination of one-half of the class. The other half of the class took the exam on an alternate date. To reduce the disruption caused by the students' moving from station to station and to allow for examination of the entire class in one setting, the traditional concept was modified using computer technology, and the twelve stations "moved" via a PowerPoint presentation while students remained stationary. Questions on both exams provided a means for testing data interpretation, diagnostic skills, and, to some extent, interpersonal skills. The overall atmosphere during the computer-based examination was less chaotic. Each student received identical instructions, explanations, and time allotments to respond to the information presented. The ratio of faculty to students required to monitor the exam was less than required for the traditional format. Additionally, since there was no need to allow time for student transition, the total time required to administer the exam was reduced. Thus, objective assessment of the entire class was accomplished using fewer faculty members and less class time and with less disruption for the students.

  10. Mechanical engineering capstone senior design textbook

    Science.gov (United States)

    Barrett, Rolin Farrar, Jr.

    This textbook is intended to bridge the gap between mechanical engineering equations and mechanical engineering design. To that end, real-world examples are used throughout the book. Also, the material is presented in an order that follows the chronological sequence of coursework that must be performed by a student in the typical capstone senior design course in mechanical engineering. In the process of writing this book, the author surveyed the fifty largest engineering schools (as ranked by the American Society of Engineering Education, or ASEE) to determine what engineering instructors are looking for in a textbook. The survey results revealed a clear need for a textbook written expressly for the capstone senior design course as taught throughout the nation. This book is designed to meet that need. This text was written using an organizational method that the author calls the General Topics Format. The format gives the student reader rapid access to the information contained in the text. All manufacturing methods, and some other material presented in this text, have been presented using the General Topics Format. The text uses examples to explain the importance of understanding the environment in which the product will be used and to discuss product abuse. The safety content contained in this text is unique. The Safety chapter teaches engineering ethics and includes a step-by-step guide to resolving ethical conflicts. The chapter includes explanations of rules, recommendations, standards, consensus standards, key safety concepts, and the legal implications of product failure. Key design principles have been listed and explained. The text provides easy-to-follow design steps, helpful for both the student and new engineer. Prototyping is presented as consisting of three phases: organization, building, and refining. A chapter on common manufacturing methods is included for reference.

  11. Defense Technology Objectives of the Joint Warfighting Science and Technology and Defense Technology Area Plan.

    Science.gov (United States)

    1996-05-01

    occlusion , multipath etc.) through the use of inertial measurement systems (Interferometric Fiber Optic Gyro, Dynamically Tuned Gyro) and will...management systems provide mobile and semi- mobile assets (e.g., Abrams, Theater Missile Defense - TMD ) with low cost, low burden survivability...technology for development of an operational high energy Airborne Laser (ABL) for Theater Missile Defense ( TMD ). Address risk reduction issues for develop

  12. Survey of Biology Capstone Courses in American and Canadian Higher Education: Requirement, Content, and Skills

    Science.gov (United States)

    Haave, Neil C.

    2015-01-01

    Capstone experiences have high educational impact with various approaches available for biology. However, no information exists regarding the pervasiveness of capstone courses in Canadian and American biology programs. This study surveyed the prevalence and character of biology capstone courses in the USA and Canada. The survey included a majority…

  13. Review Sessions and Results: Competency Testing in the Capstone Business Class

    Science.gov (United States)

    Parente, Diane H.; Brown, Randy C.; Warner, Alfred G.

    2005-01-01

    Capstone is defined in the dictionary as "putting the final stone in place." Business Policy or Strategic Management is typically the capstone class in a business management degree program. As such, there are prerequisite requirements in terms of courses and specific knowledge. We have implemented a competency test for the capstone class and…

  14. An Object-Oriented Approach to C++ Compiler Technology

    NARCIS (Netherlands)

    Sminchisescu, Cristian; Telea, Alexandru

    1999-01-01

    This paper focuses on the use of object-oriented approaches to syntactical and semantical analysis for complex object-oriented languages like C++. We are interested in these issues both from a design and implementation point of view. We implement a semantic analyzer in an object-oriented manner, usi

  15. Intelligent Discovery for Learning Objects Using Semantic Web Technologies

    Science.gov (United States)

    Hsu, I-Ching

    2012-01-01

    The concept of learning objects has been applied in the e-learning field to promote the accessibility, reusability, and interoperability of learning content. Learning Object Metadata (LOM) was developed to achieve these goals by describing learning objects in order to provide meaningful metadata. Unfortunately, the conventional LOM lacks the…

  16. A Capstone Course with a Comprehensive and Integrated Review of the Pharmacy Curriculum and Student Assessment as a Preparation for Advanced Pharmacy Practice Experiences

    OpenAIRE

    Hirsch, Adina C.; Parihar, Harish S.

    2014-01-01

    Objective. To create a capstone course that provides a comprehensive and integrated review of the pharmacy curriculum with a broad range of assessment tools to evaluate student knowledge and skills as a final preparation prior to beginning fourth-year advanced pharmacy practice experiences (APPEs).

  17. Aeronautics Research and Technology Program and specific objectives, fiscal year 1982

    Science.gov (United States)

    Olstad, W. B.

    1981-01-01

    The Aeronautics Research and Technology program is broken down into two program areas (research and technology base, and systems technology programs) which are further broken down into succeedingly more detailed activities to form a work breakdown structure for the aeronautics program: program area, program/discipline objective, specific objective, and research and technology objective and plan (RTOP). A detailed view of this work breakdown structure down to the specific objective level is provided, and goals or objectives at each of these levels are set forth. What is to be accomplished and why are addressed, but not how. The letter falls within the domain of the RTOP.

  18. Optical technologies for the observation of low Earth orbit objects

    CERN Document Server

    Hampf, Daniel; Riede, Wolfgang

    2015-01-01

    In order to avoid collisions with space debris, the near Earth orbit must be continuously scanned by either ground- or spaced-based facilities. For the low Earth orbit, radar telescopes are the workhorse for this task, especially due to their continuous availability. However, optical observation methods can deliver complementary information, especially towards high accuracy measurements. Passive-optical observations are inexpensive and can yield very precise information about the apparent position of the object in the sky via comparison with background stars. However, the object's distance from the observer is not readily accessible, which constitutes a major drawback of this approach for the precise calculation of the orbital elements. Two experimental methods have been devised to overcome this problem: Using two observatories a few kilometres apart, strictly simultaneous observations of the same object yield an accurate, instantaneous 3D position determination through measurement of the parallax. If only on...

  19. Managing emerging risk the capstone of preparedness

    CERN Document Server

    Burton, Kevin D

    2016-01-01

    From Main Street to Mumbai, Managing Emerging Risk: The Capstone of Preparedness considers the new global drivers behind threats and hazards facing all those tasked with protecting the public and private sector. The text delves into the global mindset of public and private sector emergency managers and presents a new risk landscape vastly different from the one existing ten years ago. The book begins by presenting a series of fictitious scenarios each resulting in mass destruction and fatalities. These are each followed by actual news stories that support the scenarios and demonstrate that the proposed events-seemingly unthinkable-have the potential to occur. Next, the author identifies two drivers in the practice of emergency management and general preparedness today that constitute our view of the future and the new face of risk. The first is the Disaster Halo Effect-the idea that modern threats exhibit more than one event. The second is the worldview of our nation as a Market State focused on the trading o...

  20. Objective assessment of speech and audio quality - Technology and applications

    NARCIS (Netherlands)

    Rix, A.W.; Beerends, J.G.; Kim, D.-S.; Kroon, P.; Ghitza, O.

    2006-01-01

    In the past few years, objective quality assessment models have become increasingly used for assessing or monitoring speech and audio quality. By measuring perceived quality on an easily-understood subjective scale, such as listening quality (excellent, good, fair, poor, bad), these methods provide

  1. Researches on Object Modeling Technology%OMT技术研究

    Institute of Scientific and Technical Information of China (English)

    白君芬

    2012-01-01

      At present, for the study of object-oriented development methods have become more sophisticated. Among them, the Object Modeling Technique (OMT) has better performance in object-oriented software system modeling.Introduced three models of OMT concepts and OMT elaborated the OMT modeling and design process, fully embodies the the OMT techni⁃cal for most applications, the field of software development to provide a more practical, more efficient guarantee.%  目前,对于面向对象开发方法的研究已日益成熟。其中,对象建模技术(OMT)在面向对象的软件系统建模中具有较好的性能。介绍了OMT概念以及OMT的三种模型,阐述了OMT的建模和设计过程,充分体现了OMT技术为大多数应用领域的软件开发提供了一种更实际、更高效的保证。

  2. Peer Evaluation in Chemical Engineering Capstone Design via Wikis

    Science.gov (United States)

    Heldt, Caryn L.

    2012-01-01

    Inter-group peer evaluation through wikis was implemented as a method for senior capstone design teams to improve writing and the critical evaluation of data. Each group was evaluated by peers using a qualitative discussion and evaluated quantitatively by instructors. Students had an increased interest in contributing to online knowledge centers,…

  3. Promoting Liberal Learning in a Capstone Accounting Course

    Science.gov (United States)

    Ahlawat, Sunita; Miller, Gerald; Shahid, Abdus

    2012-01-01

    This paper describes our efforts to integrate liberal learning principles in a capstone course within the overwhelmingly career-focused discipline of accountancy. Our approach was based on the belief that business and liberal learning courses are complementary, rather than competitive, elements of a well-rounded education. The ability to deal with…

  4. Investigating Teaching Leadership in the Capstone Marketing Course

    Science.gov (United States)

    Facca-Miess, Tina M.

    2015-01-01

    Marketing graduates are ultimately expected to perform in managerial roles, yet limited course work is devoted to leadership training for marketing management. In the capstone marketing course, group projects with partner organizations can serve as an opportunity for student leadership development. Marketing students working in groups on…

  5. A Survey of Computer Science Capstone Course Literature

    Science.gov (United States)

    Dugan, Robert F., Jr.

    2011-01-01

    In this article, we surveyed literature related to undergraduate computer science capstone courses. The survey was organized around course and project issues. Course issues included: course models, learning theories, course goals, course topics, student evaluation, and course evaluation. Project issues included: software process models, software…

  6. Why Phishing Works: Project for an Information Security Capstone Course

    Science.gov (United States)

    Pollacia, Lissa; Ding, Yan Zong; Yang, Seung

    2015-01-01

    This paper presents a project which was conducted in a capstone course in Information Security. The project focused on conducting research concerning the various aspects of phishing, such as why phishing works and who is more likely to be deceived by phishing. Students were guided through the process of conducting research: finding background and…

  7. A Capstone Course on Agile Software Development Using Scrum

    Science.gov (United States)

    Mahnic, V.

    2012-01-01

    In this paper, an undergraduate capstone course in software engineering is described that not only exposes students to agile software development, but also makes it possible to observe the behavior of developers using Scrum for the first time. The course requires students to work as Scrum Teams, responsible for the implementation of a set of user…

  8. An Integrated Approach to Research Methods and Capstone

    Science.gov (United States)

    Postic, Robert; McCandless, Ray; Stewart, Beth

    2014-01-01

    In 1991, the AACU issued a report on improving undergraduate education suggesting, in part, that a curriculum should be both comprehensive and cohesive. Since 2008, we have systematically integrated our research methods course with our capstone course in an attempt to accomplish the twin goals of comprehensiveness and cohesion. By taking this…

  9. A Survey of Computer Science Capstone Course Literature

    Science.gov (United States)

    Dugan, Robert F., Jr.

    2011-01-01

    In this article, we surveyed literature related to undergraduate computer science capstone courses. The survey was organized around course and project issues. Course issues included: course models, learning theories, course goals, course topics, student evaluation, and course evaluation. Project issues included: software process models, software…

  10. A Capstone Course on Agile Software Development Using Scrum

    Science.gov (United States)

    Mahnic, V.

    2012-01-01

    In this paper, an undergraduate capstone course in software engineering is described that not only exposes students to agile software development, but also makes it possible to observe the behavior of developers using Scrum for the first time. The course requires students to work as Scrum Teams, responsible for the implementation of a set of user…

  11. An Integrated Approach to Research Methods and Capstone

    Science.gov (United States)

    Postic, Robert; McCandless, Ray; Stewart, Beth

    2014-01-01

    In 1991, the AACU issued a report on improving undergraduate education suggesting, in part, that a curriculum should be both comprehensive and cohesive. Since 2008, we have systematically integrated our research methods course with our capstone course in an attempt to accomplish the twin goals of comprehensiveness and cohesion. By taking this…

  12. Embodying Life-Long Learning: "Transition" and Capstone Experiences

    Science.gov (United States)

    Butler, Des; Coe, Sandra; Field, Rachael; McNamara, Judith; Kift, Sally; Brown, Catherine

    2017-01-01

    This paper discusses the principle of "Transition" as it has been conceptualised by the Curriculum Renewal in Legal Education project. The project sought to develop a principled framework for renewing the final year of tertiary legal education in Australia. Capstone experiences were chosen as the most appropriate mechanism for assisting…

  13. Reconsidering the International Business Capstone: Capping, Bridging, or Both?

    Science.gov (United States)

    Starr-Glass, David

    2010-01-01

    The capstone experience has become ubiquitous in undergraduate education. Originally, it served as a terminal display of academic excellence and bridging experience between study and work; more recently, however, it has been seen in terms of academic completion and consolidation. In times of increased turbulence for new business graduates, and in…

  14. A Capstone Mathematics Course for Prospective Secondary Mathematics Teachers

    Science.gov (United States)

    Artzt, Alice F.; Sultan, Alan; Curcio, Frances R.; Gurl, Theresa

    2012-01-01

    This article describes an innovative capstone mathematics course that links college mathematics with school mathematics and pedagogy. It describes how college juniors in a secondary mathematics teacher preparation program engage in leadership experiences that enable them to learn mathematics for teaching while developing student-centered…

  15. Integrative Biology: A Capstone Course for an Introductory Biology Core

    Science.gov (United States)

    Chaplin, Susan B.; Hartung, Nancy Z.

    2012-01-01

    A capstone to the biology introductory curriculum was developed with the specific goals of enhancing integration of course content, promoting development of oral presentation skills and critical reading and thinking skills, and introducing ecological principles omitted from the rest of the core. Classes of 12 to 16 students were team taught by…

  16. Investigating Teaching Leadership in the Capstone Marketing Course

    Science.gov (United States)

    Facca-Miess, Tina M.

    2015-01-01

    Marketing graduates are ultimately expected to perform in managerial roles, yet limited course work is devoted to leadership training for marketing management. In the capstone marketing course, group projects with partner organizations can serve as an opportunity for student leadership development. Marketing students working in groups on…

  17. Inclusion-Based Afterschool Program Evaluation: A Capstone Research Project

    Science.gov (United States)

    Earl, Kristine N.

    2013-01-01

    Autism spectrum disorder is characterized as a complex brain disorder that impacts the life of an individual (Autism Society, n.d.; Autism Speaks, 2013). The prevalence of autism is on the rise (Baio, 2012; CDC, 2012), impacting the stress of the family (Haimer, 2012; Hall & Graff) and the need for services (Haney, 2012). This capstone study…

  18. The use of software agents and distributed objects to integrate enterprises: Compatible or competing technologies?

    Energy Technology Data Exchange (ETDEWEB)

    Pancerella, C.M.

    1998-04-01

    Distributed object and software agent technologies are two integration methods for connecting enterprises. The two technologies have overlapping goals--interoperability and architectural support for integrating software components--though to date little or no integration of the two technologies has been made at the enterprise level. The primary difference between these two technologies is that distributed object technologies focus on the problems inherent in connecting distributed heterogeneous systems whereas software agent technologies focus on the problems involved with coordination and knowledge exchange across domain boundaries. This paper addresses the integration of these technologies in support of enterprise integration across organizational and geographic boundaries. The authors discuss enterprise integration issues, review their experiences with both technologies, and make recommendations for future work. Neither technology is a panacea. Good software engineering techniques must be applied to integrate an enterprise because scalability and a distributed software development team are realities.

  19. A survey on the automatic object tracking technology using video signals

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Cheol; Jun, Hyeong Seop; Choi, Yu Rak; Kim, Jae Hee

    2003-01-01

    Recently, automatic identification and tracking of the object are actively studied according to the rapid development of signal processing and vision technology using improved hardware and software. The object tracking technology can be applied to various fields such as road watching of the vehicles, weather satellite, traffic observation, intelligent remote video-conferences and autonomous mobile robots. Object tracking system receives subsequent pictures from the camera and detects motions of the objects in these pictures. In this report, we investigate various object tracking techniques such as brightness change using histogram characteristic, differential image analysis, contour and feature extraction, and try to find proper methods that can be used to mobile robots actually.

  20. Integration of a NASA faculty fellowship project within an undergraduate engineering capstone design class

    Science.gov (United States)

    Carmen, C.

    2012-11-01

    The United States (US) National Aeronautics and Space Administration (NASA) Exploration Systems Mission Directorate (ESMD) provides university faculty fellowships that prepare the faculty to implement engineering design class projects that possess the potential to contribute to NASA ESMD objectives. The goal of the ESMD is to develop new capabilities, support technologies and research that will enable sustained and affordable human and robotic space exploration. In order to create a workforce that will have the desire and skills necessary to achieve these goals, the NASA ESMD faculty fellowship program enables university faculty to work on specific projects at a NASA field center and then implement the project within their capstone engineering design class. This allows the senior - or final year - undergraduate engineering design students, the opportunity to develop critical design experience using methods and design tools specified within NASA's Systems Engineering (SE) Handbook. The faculty fellowship projects focus upon four specific areas critical to the future of space exploration: spacecraft, propulsion, lunar and planetary surface systems and ground operations. As the result of a 2010 fellowship, whereby faculty research was conducted at Marshall Space Flight Center (MSFC) in Huntsville, Alabama (AL), senior design students in the Mechanical and Aerospace Engineering (MAE) department at the University of Alabama in Huntsville (UAH) had the opportunity to complete senior design projects that pertained to current work conducted to support ESMD objectives. Specifically, the UAH MAE students utilized X-TOOLSS (eXploration Toolset for the Optimization Of Launch and Space Systems), an Evolutionary Computing (EC) design optimization software, as well as design, analyze, fabricate and test a lunar regolith burrowing device - referred to as the Lunar Wormbot (LW) - that is aimed at exploring and retrieving samples of lunar regolith. These two projects were

  1. Analysis and Reconstitution on Talent Cultivating Objective Positioning for University of Applied Technology

    Institute of Scientific and Technical Information of China (English)

    成伟伟

    2016-01-01

    As an emerging and multidisciplinary college, University of Applied Technology features the certain kind of applied technology, and the technical talents from the university like this have drew great attention from society. However, how to positioning the talent cultivating objective is very critical to balance the mismatching between talents supply of universities and talents demand of the society. This article focuses on the analysis of existing issue that lays in talent cultivating objective positioning for transitioning from academic universities to technology applied universities for local institutes, and clarification of the characteristics of talent training objective positioning in western developed countries as well. Given this, put forward how domestic universities of applied technology locate and reconstitute talent cultivating objectives.

  2. The engineering capstone course fundamentals for students and instructors

    CERN Document Server

    Hoffman, Harvey F

    2014-01-01

    This essential book takes students and instructors through steps undertaken in a start-to-finish engineering project as conceived and presented in the engineering capstone course. The learning experience follows an industry model to prepare students to recognize a need for a product or service and work in a team; identify competition, patent overlap, and necessary resources; generate a project proposal that accounts for business issues; prepare a design, develop and fabricate the product or service; develop a test plan to evaluate the product or service; and prepare and deliver a final report and presentation. Throughout the book, students are asked to examine the business viability of the project. The Engineering Capstone Course: Fundamentals for Students and Instructors emphasizes that a design must meet a set of realistic technical specifications and constraints, including examination of attendant economics, environmental needs, sustainability, manufacturability, health and safety, governmental regulations...

  3. How Student Written Communication Skills Benefit during Participation in an Industry-Sponsored Civil Engineering Capstone Course

    Science.gov (United States)

    Fries, Ryan; Cross, Brad; Zhou, Jianpeng; Verbais, Chad

    2017-01-01

    Because many engineering programs use capstone design courses and value strong communication abilities, authors sought to identify how student written communication skills changed because of industry-sponsored capstone design projects. A student exit survey was collected at the end of the capstone design course during faculty-led projects and…

  4. Capstone Design Courses Producing Industry-Ready Biomedical Engineers

    CERN Document Server

    Goldberg, Jay

    2007-01-01

    The biomedical engineering senior capstone design course is probably the most important course taken by undergraduate biomedical engineering students. It provides them with the opportunity to apply what they have learned in previous years; develop their communication (written, oral, and graphical), interpersonal (teamwork, conflict management, and negotiation), project management, and design skills; and learn about the product development process. It also provides students with an understanding of the economic, financial, legal, and regulatory aspects of the design, development, and commercial

  5. Multi-objective dynamic optimization model for China's road transport energy technology switching

    Institute of Scientific and Technical Information of China (English)

    Dan GAO; Zheng LI; Feng FU; Linwei MA

    2009-01-01

    Deducting the future switching of the road transport energy technology is one of the key preconditions for relative technology development planning. However,one of the difficulties is to address the issue of multi-objective and conflicting constrains, e.g., minimizing the climate mitigation or minimizing economic cost. In this paper, a dynamic optimization model was established, which can be used to analyze the road transport energy technology switching under multi-objective constrains.Through one case study, a series of solutions could be derived to provide decision-makers with the flexibility to choose the appropriate solution with respect to the given situation.

  6. Advanced Technology for the Re-use of Learning Objects in a Course Management System

    NARCIS (Netherlands)

    Strijker, A.; Collis, B.A.

    2005-01-01

    The creation, labelling, use, and re-use of learning objects is an important area of development involving learning technology. In the higher education context, instructors typically use a course management system (CMS) to organize and manage their own learning objects. The needs and practices of in

  7. Common Elements of Capstone Projects in the World's Top-Ranked Engineering Universities

    Science.gov (United States)

    Ward, Thomas A.

    2013-01-01

    "Capstone" is a metaphor used to describe a final achievement that builds upon previous works and encapsulates them. Capstone projects are included in engineering curricula to integrate multi-disciplinary subjects and teach professional skills that are difficult to impart in a traditional lectured course. Since these projects serve to…

  8. The Application of Self-Directed Learning in a Marketing Strategy Capstone Course

    Science.gov (United States)

    Gray, David M.

    2011-01-01

    Capstone courses can create a space for students and educators to act as co-producers of desired learning outcomes which are directly relevant to the world of work. This study uses an auto-ethnographic case study approach to demonstrate how a mixed model learning approach evolved in a capstone marketing strategy unit in a marketing major at an…

  9. The Content and Integrative Component of Capstone Experiences: An Analysis of Political Science Undergraduate Programs

    Science.gov (United States)

    Hummer, Jill Abraham

    2014-01-01

    In 1991, the APSA Task Force on Political Science recommended elements of a curricular structure that would best promote student learning. The report stated that there should be a capstone experience at the end of the senior year and that the capstone should require students to integrate their whole learning experience in the major. This article…

  10. The Impact of a Capstone Farm Management Course on Critical Thinking Abilities

    Science.gov (United States)

    Perry, Dustin K.; Paulsen, Thomas H.; Retallick, Michael S.

    2015-01-01

    Current research demonstrates a need to explore the effects of specific course designs or directed activities on higher education students' critical thinking abilities. Specifically, such research on the effect of an experiential learning-based capstone course is limited. All students (N = 54) enrolled in a capstone farm management course…

  11. The Application of Self-Directed Learning in a Marketing Strategy Capstone Course

    Science.gov (United States)

    Gray, David M.

    2011-01-01

    Capstone courses can create a space for students and educators to act as co-producers of desired learning outcomes which are directly relevant to the world of work. This study uses an auto-ethnographic case study approach to demonstrate how a mixed model learning approach evolved in a capstone marketing strategy unit in a marketing major at an…

  12. Systematically Evaluating the Effectiveness of an Information Systems Capstone Course: Implications for Practice

    Science.gov (United States)

    Gill, T. Grandon; Ritzhaupt, Albert D.

    2013-01-01

    The information systems capstone experience for undergraduate majors is a topic frequently discussed in academic circles within the field. Though very little consensus exists on this topic, there are core themes that emerge in the design, development, and delivery of the undergraduate capstone courses. Our analysis of prior literature reveals four…

  13. The Content and Integrative Component of Capstone Experiences: An Analysis of Political Science Undergraduate Programs

    Science.gov (United States)

    Hummer, Jill Abraham

    2014-01-01

    In 1991, the APSA Task Force on Political Science recommended elements of a curricular structure that would best promote student learning. The report stated that there should be a capstone experience at the end of the senior year and that the capstone should require students to integrate their whole learning experience in the major. This article…

  14. The MBA Capstone Course: Building Theoretical, Practical, Applied, and Reflective Skills

    Science.gov (United States)

    Inamdar, Syeda Noorein; Roldan, Malu

    2013-01-01

    The capstone strategy course is used in many management education programs to provide practical business relevance as a means for students to transition to the business world. We conducted an empirical study to determine to what extent capstone strategy courses are teaching the following four skills that prepare students to meet business job…

  15. Framework for Implementing Engineering Senior Design Capstone Courses and Design Clinics

    Science.gov (United States)

    Franchetti, Matthew; Hefzy, Mohamed Samir; Pourazady, Mehdi; Smallman, Christine

    2012-01-01

    Senior design capstone projects for engineering students are essential components of an undergraduate program that enhances communication, teamwork, and problem solving skills. Capstone projects with industry are well established in management, but not as heavily utilized in engineering. This paper outlines a general framework that can be used by…

  16. A study on software-based sensing technology for multiple object control in AR video.

    Science.gov (United States)

    Jung, Sungmo; Song, Jae-Gu; Hwang, Dae-Joon; Ahn, Jae Young; Kim, Seoksoo

    2010-01-01

    Researches on Augmented Reality (AR) have recently received attention. With these, the Machine-to-Machine (M2M) market has started to be active and there are numerous efforts to apply this to real life in all sectors of society. To date, the M2M market has applied the existing marker-based AR technology in entertainment, business and other industries. With the existing marker-based AR technology, a designated object can only be loaded on the screen from one marker and a marker has to be added to load on the screen the same object again. This situation creates a problem where the relevant marker'should be extracted and printed in screen so that loading of the multiple objects is enabled. However, since the distance between markers will not be measured in the process of detecting and copying markers, the markers can be overlapped and thus the objects would not be augmented. To solve this problem, a circle having the longest radius needs to be created from a focal point of a marker to be copied, so that no object is copied within the confines of the circle. In this paper, software-based sensing technology for multiple object detection and loading using PPHT has been developed and overlapping marker control according to multiple object control has been studied using the Bresenham and Mean Shift algorithms.

  17. Harnessing collaborative technology to accelerate achievement of chronic disease management objectives for Canada.

    Science.gov (United States)

    Thompson, Leslee J; Healey, Lindsay; Falk, Will

    2007-01-01

    Morgan and colleagues put forth a call to action for the transformation of the Canadian healthcare system through the adoption of a national chronic disease prevention and management (CDPM) strategy. They offer examples of best practices and national solutions including investment in clinical information technologies to help support improved care and outcomes. Although we acknowledge that the authors propose CDPM solutions that are headed in the right direction, more rapid deployment of solutions that harness the potential of advanced collaborative technologies is required. We provide examples of how technologies that exist today can help to accelerate the achievement of some key CDPM objectives.

  18. Determining the feasibility of objective adherence measurement with blister packaging smart technology

    NARCIS (Netherlands)

    Onzenoort, H.A. van; Neef, C.; Verberk, W.W.; Iperen, H.P. van; Leeuw, P.W. de; Kuy, P.H. van der

    2012-01-01

    PURPOSE: The results of a feasibility study of blister-pack smart technology for monitoring medication adherence are reported. METHODS: Research in the area of objective therapy compliance measurement has led to the development of microprocessor-driven systems that record the time a unit dose is

  19. The Role of Professional Objects in Technology-Enhanced Learning Environments in Higher Education

    Science.gov (United States)

    Zitter, Ilya; de Bruijn, Elly; Simons, Robert-Jan; ten Cate, Olle

    2012-01-01

    We study project-based, technology-enhanced learning environments in higher education, which should produce, by means of specific mechanisms, learning outcomes in terms of transferable knowledge and learning-, thinking-, collaboration- and regulation-skills. Our focus is on the role of objects from professional practice serving as boundary objects…

  20. Determining the feasibility of objective adherence measurement with blister packaging smart technology

    NARCIS (Netherlands)

    Onzenoort, H.A. van; Neef, C.; Verberk, W.W.; Iperen, H.P. van; Leeuw, P.W. de; Kuy, P.H. van der

    2012-01-01

    PURPOSE: The results of a feasibility study of blister-pack smart technology for monitoring medication adherence are reported. METHODS: Research in the area of objective therapy compliance measurement has led to the development of microprocessor-driven systems that record the time a unit dose is rem

  1. IMPLEMENTATION OF OBJECT TRACKING ALGORITHMS ON THE BASIS OF CUDA TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    B. A. Zalesky

    2014-01-01

    Full Text Available A fast version of correlation algorithm to track objects on video-sequences made by a nonstabilized camcorder is presented. The algorithm is based on comparison of local correlations of the object image and regions of video-frames. The algorithm is implemented in programming technology CUDA. Application of CUDA allowed to attain real time execution of the algorithm. To improve its precision and stability, a robust version of the Kalman filter has been incorporated into the flowchart. Tests showed applicability of the algorithm to practical object tracking.

  2. From CAD to Robot: Undergraduate Capstone Design in Engineering Technology

    Directory of Open Access Journals (Sweden)

    Kuldeep S. Rawat

    2013-06-01

    Full Text Available A novel senior project in designing and implementing a wheeled platform-based experimental mobile robot is discussed. This mobile robot design project was used as a platform to learn sensor interfacing, microcontroller programming, motor control, and electronic circuit design and troubleshooting. A specially designed proto board was used so that students could experiment with various types of sensors and supporting electronic circuitry. The modules implemented in this project are, servo motor control, infrared (IR-based obstacle detection and avoidance, temperature sensing, and IR wireless communication. An 8-bit Peripheral Interface Controller (PIC microcontroller, operating at 20MHz, was used as a programmable controller to monitor external environment through sensors and make appropriate decisions. PIC microcontroller was programmed using PICBasic PRO, a BASIC like high-level language. The implementation was divided into separate experiments, through which the students progressively completed the mobile robot. This progressive experimentation helped students develop their knowledge of interfacing, microcontroller programming, electronic control, circuit design, and troubleshooting in an incremental manner. The robot design experiments, sensor interfacing, electronic control, supporting circuitry, problems faced and troubleshooting during implementation are discussed in the paper.

  3. A multi-objective stochastic approach to combinatorial technology space exploration

    Science.gov (United States)

    Patel, Chirag B.

    Historically, aerospace development programs have frequently been marked by performance shortfalls, cost growth, and schedule slippage. New technologies included in systems are considered to be one of the major sources of this programmatic risk. Decisions regarding the choice of technologies to include in a design are therefore crucial for a successful development program. This problem of technology selection is a challenging exercise in multi-objective decision making. The complexity of this selection problem is compounded by the geometric growth of the combinatorial space with the number of technologies being considered and the uncertainties inherent in the knowledge of the technological attributes. These problems are not typically addressed in the selection methods employed in common practice. Consequently, a method is desired to aid the selection of technologies for complex systems design with consideration of the combinatorial complexity, multi-dimensionality, and the presence of uncertainties. Several categories of techniques are explored to address the shortcomings of current approaches and to realize the goal of an efficient and effective combinatorial technology space exploration method. For the multi-objective decision making, a posteriori preference articulation is implemented. To realize this, a stochastic algorithm for Pareto optimization is formulated based on the concepts of SPEA2. Techniques to address the uncertain nature of technology impact on the system are also examined. Monte Carlo simulations using the surrogate models are used for uncertainty quantification. The concepts of graph theory are used for modeling and analyzing compatibility constraints among technologies and assessing their impact on the technology combinatorial space. The overall decision making approach is enabled by the application of an uncertainty quantification technique under the framework of an efficient probabilistic Pareto optimization algorithm. As a result, multiple

  4. Design and Implementation Of Hardware And Software Systems For Object Tracking Using RFID Technology

    Directory of Open Access Journals (Sweden)

    Dr. G.Venkateswara Rao

    2011-05-01

    Full Text Available Now a day’s mobile technology plays key role, in various environments identification of objects can be done manually, to improve the efficiency of an identification of objects we are using RFID tags. RFID tags track objects in supply chains, and are working their way into the pockets, belongings and even the bodies of consumers. Tag collision occurs while two or more than two tags deliver their unique identification (UID to the reader. Since collision, which would significantly affect the efficacy of RFID, has been one of the major study issues for RFID technology, we have developed a solution, bit competed algorithm (BCA, to solve the collision problem occurred in RFID system and consequently improve the efficacy of RFID .This paper briefly presents what are the components in RFID system, Architecture of a RFID system, what are the frequency ranges used in the RFID system and what are the problems occurred in the RFID system. Here we develop a system as a prototype for object identification. By using this technology objects can be tracks more efficiently, it provides more security, it save time and money.

  5. Individualizing a capstone project: a cruise ship nurse creates a brochure about the Norwalk virus.

    Science.gov (United States)

    Campbell, William T; Benn, Sonja

    2011-01-01

    An MS capstone is a summative academic project where the student is expected to combine personal experience, previous nursing knowledge, and newly acquired graduate nursing skills and integrate them into practice. The authors discuss the challenges of a capstone project from the committee chair and student perspectives. This family nurse practitioner student was a cruise ship nurse who identified a need related to the Norwalk virus. The committee chair needed to direct the student through the capstone formal process while helping her to create a professional brochure to educate future travelers.

  6. The U.S. Army Capstone Concept

    Science.gov (United States)

    2012-12-19

    leadership.10 This strategic guidance describes a joint force that will be smaller and leaner , but will be agile, flexible, ready, and technologically...becomes a smaller, leaner force, it must take advantage of this war dividend and reinvest it in the future.39 These experienced leaders form the...enable assured mobility, vertical maneuver, strategic mobility, operational reach, and unmanned ground autonomy . These investments will enable the Army

  7. Research on Modeling and Reusing of Computer Numerical Control Software with Object-oriented Technology

    Institute of Scientific and Technical Information of China (English)

    胡俊; 王宇晗; 王涛; 蔡建国

    2001-01-01

    To improve the reusable and configurable ability of computer numerical control ( CNC ) software, a new method to construct reusable model of CNC software with object-oriented (OO) technology is proposed. Based on analyzing function of CNC software, the article presents how to construct a general class library of CNC software with OO technology. Most function modules of CNC software can he reused because of inheritable capability of classes. Besides, the article analyzes the object relational model in request/report mode, and multitask concurrent management model, which can he applied on double-CPU hardware platform and Windows 95/NT environment. Finally, the method has been successfully applied on a turning CNC system and a milling CNC system, and some function modules have been reused.

  8. Study on tracking technology of the moving object based on computer vision

    Science.gov (United States)

    Xu, Ranran; Xu, Zhenying; Li, Boquan

    2010-10-01

    The tracking technology of the moving object has been an active topic of the visual tracking system. In this paper, the tracking algorithms are classified into four classes: correlation-based methods, boundary-based methods, model-based methods and multifunctional methods. Based on the analysis of the advantages and disadvantages of all these algorithms, a new tracking algorithm, integrating SSDA and advanced Camshift algorithm, is put forward here.

  9. Research and technology goals and objectives for Integrated Vehicle Health Management (IVHM)

    Science.gov (United States)

    1992-01-01

    Integrated Vehicle Health Management (IVHM) is defined herein as the capability to efficiently perform checkout, testing, and monitoring of space transportation vehicles, subsystems, and components before, during, and after operational This includes the ability to perform timely status determination, diagnostics, and prognostics. IVHM must support fault-tolerant response including system/subsystem reconfiguration to prevent catastrophic failures; and IVHM must support the planning and scheduling of post-operational maintenance. The purpose of this document is to establish the rationale for IVHM and IVHM research and technology planning, and to develop technical goals and objectives. This document is prepared to provide a broad overview of IVHM for technology and advanced development activities and, more specifically, to provide a planning reference from an avionics viewpoint under the OAST Transportation Technology Program Strategic Plan.

  10. Capstone: A Geometry-Centric Platform to Enable Physics-Based Simulation and Design of Systems

    Science.gov (United States)

    2015-10-05

    architecture of Capstone and its intended usage scenarios. This is followed by a description of example uses and impact on different stages of the acquisition...Windows®, and Mac OS®. Capstone is not a monolithic software tool. It has a layered architecture . At its core, it is a compact set of well...numerical simulations especially unstructured meshing, modeling and bio -mechanics. Mr. Eric L. Mestreau is a Scientific Researcher with Sotera Defense

  11. Teaching Risk Analysis in an Aircraft Gas Turbine Engine Design Capstone Course

    Science.gov (United States)

    2016-01-01

    American Institute of Aeronautics and Astronautics 1 Teaching Risk Analysis in an Aircraft Gas Turbine Engine Design Capstone Course...introduction of risk analysis in an undergraduate aircraft engine design capstone course that is taught in concert with a companion course in airframe... design . The two preliminary designs , one for the engine and the other for the airframe, must be integrated as subsystems within a system to satisfy

  12. The Potential of Capstone Learning Experiences in addressing perceived shortcomings in LLB Training in South Africa

    Directory of Open Access Journals (Sweden)

    Geo Quinot

    2014-11-01

    Full Text Available Current debates about legal education in South Africa have revealed the perception that the LLB curriculum does not adequately integrate various outcomes, in particular outcomes relating to the development of skills in communication, problem solving, ethics, and in general a holistic view of the law in practice. One mechanism that has been mooted as a potential remedy to this situation is capstone courses, which will consolidate and integrate the four years of study in the final year and build a bridge to the world of practice. A literature review on capstone courses and learning experiences (collectively referred to as capstones indicates that these curriculum devices as modes of instruction offer particular pedagogical advantages. These include inculcating a strong perception of coherence across the curriculum and hence discipline in students, providing the opportunity for students to reflect on their learning during the course of the entire programme, creating an opportunity to engage with the complexity of law and legal practice, and guiding students through the transition from university to professional identity. An empirical analysis of the modes of instruction used in LLB curricula at 13 South African law faculties/schools indicates that there are six categories of existing modules or learning experiences that already exhibit elements of capstone-course design. These are clinics, internships, moots, research projects, topical capstones and capstone assessment. A further comparative study into foreign law curricula in especially Australia and the United States of America reveals four further noteworthy approaches to capstone-course design, namely problem-based learning, the virtual office, conferences and remedies courses. The empirical study suggests that capstones indeed hold the potential as learning experiences to address some of the challenges facing legal education in South Africa but that further development of this curriculum

  13. Digital learning objects in nursing consultation: technology assessment by undergraduate students.

    Science.gov (United States)

    Silveira, DeniseTolfo; Catalan, Vanessa Menezes; Neutzling, Agnes Ludwig; Martinato, Luísa Helena Machado

    2010-01-01

    This study followed the teaching-learning process about the nursing consultation, based on digital learning objects developed through the active Problem Based Learning method. The goals were to evaluate the digital learning objects about nursing consultation, develop cognitive skills on the subject using problem based learning and identify the students' opinions on the use of technology. This is an exploratory and descriptive study with a quantitative approach. The sample consisted of 71 students in the sixth period of the nursing program at the Federal University of Rio Grande do Sul. The data was collected through a questionnaire to evaluate the learning objects. The results showed positive agreement (58%) on the content, usability and didactics of the proposed computer-mediated activity regarding the nursing consultation. The application of materials to the students is considered positive.

  14. Alignment of Assessment Objectives with Instructional Objectives Using Revised Bloom's Taxonomy--The Case for Food Science and Technology Education

    Science.gov (United States)

    Jideani, V. A.; Jideani, I. A.

    2012-01-01

    Nine food science and technology (FST) subjects were assessed for alignment between the learning outcomes and assessment using revised Bloom's taxonomy (RBT) of cognitive knowledge. Conjoint analysis was used to estimate the utilities of the levels of cognitive, knowledge, and the attribute importance (cognitive process and knowledge dimension)…

  15. Innovative activity of high-technology companies as assessment and forecasting object

    Directory of Open Access Journals (Sweden)

    A. E. Sklyarov

    2016-01-01

    Full Text Available Innovation activities, as well as innovations, are closely related meanings, and like many others economical definitions, have a broad range of meanings. Main characteristics and attributes of innovation involves new or significantly improved product, that’s being used, or in other words, found its application, and innovative activities – activities focused on realization of innovations. In this article, innovations are mainly considered in terms of high-technology production, evidence from Russian space industry. There are 5 basic stages of lifecycle of innovative project in considered industry: initiation, development, realization, expansion, consumption. Practically, third or fourth, or even both of these stages, often missing because there is no need of them. R&D activities, or even further serial production, based on previous developments, is an innovation activity, because these activities are stages of innovative projects lifecycle itself. Then it seems legit, to draw a conclusion, that in terms of high-technology production, company’s primary activity equals innovative activity. Basic characteristics of innovative activity of high-technology companies as assessment and forecasting object involves high level of uncertainty at every stage of projects lifecycle, high dependency on funding level of this activity, and high level and erratic structure of risk. All the above mentioned, means that assessment and forecasting of innovative activity of high-technology companies, needs development of its own methodological tools for each industry.

  16. Object-Oriented Bayesian Networks (OOBN) for Aviation Accident Modeling and Technology Portfolio Impact Assessment

    Science.gov (United States)

    Shih, Ann T.; Ancel, Ersin; Jones, Sharon M.

    2012-01-01

    The concern for reducing aviation safety risk is rising as the National Airspace System in the United States transforms to the Next Generation Air Transportation System (NextGen). The NASA Aviation Safety Program is committed to developing an effective aviation safety technology portfolio to meet the challenges of this transformation and to mitigate relevant safety risks. The paper focuses on the reasoning of selecting Object-Oriented Bayesian Networks (OOBN) as the technique and commercial software for the accident modeling and portfolio assessment. To illustrate the benefits of OOBN in a large and complex aviation accident model, the in-flight Loss-of-Control Accident Framework (LOCAF) constructed as an influence diagram is presented. An OOBN approach not only simplifies construction and maintenance of complex causal networks for the modelers, but also offers a well-organized hierarchical network that is easier for decision makers to exploit the model examining the effectiveness of risk mitigation strategies through technology insertions.

  17. 220GHz wideband 3D imaging radar for concealed object detection technology development and phenomenology studies

    Science.gov (United States)

    Robertson, Duncan A.; Macfarlane, David G.; Bryllert, Tomas

    2016-05-01

    We present a 220 GHz 3D imaging `Pathfinder' radar developed within the EU FP7 project CONSORTIS (Concealed Object Stand-Off Real-Time Imaging for Security) which has been built to address two objectives: (i) to de-risk the radar hardware development and (ii) to enable the collection of phenomenology data with ~1 cm3 volumetric resolution. The radar combines a DDS-based chirp generator and self-mixing multiplier technology to achieve a 30 GHz bandwidth chirp with such high linearity that the raw point response is close to ideal and only requires minor nonlinearity compensation. The single transceiver is focused with a 30 cm lens mounted on a gimbal to acquire 3D volumetric images of static test targets and materials.

  18. Fetal subjects and maternal objects: reproductive technology and the new fetal/maternal relation.

    Science.gov (United States)

    Squier, S

    1996-10-01

    This essay examines three tendencies nurtured in the practices of reproductive technology - tendencies with profoundly disturbing implications for us as individuals and as social beings. They are: 1) the increasing subjectification of the fetus (that is, the increasing tendency to posit a fetal subject), 2) the increasing objectification of the gestating woman, leading to her representation as interchangeable object rather than unique subject, and 3) the increasing tendency to conceive of the fetus and the mother as social, medical, and legal antagonists. Considering the construction of fetus, mother, and the fetal/maternal relation in earlier (Western) historical periods, a contemporary work of literature, a government report, and the popular press, I argue that as the fetus is increasingly being understood as a subject, the mother is increasingly being reduced to an antagonist, an obstacle to fetal health, and an object. The essay concludes by offering some tentative conclusions about the general process of fetal subjectification in the United States and Europe.

  19. Desert Research and Technology Studies (RATS) 2007 Field Campaign Objectives and Results

    Science.gov (United States)

    Kosmo, Joseph; Romig, Barbara

    2008-01-01

    Desert "RATS" (Research and Technology Studies) is a combined, multi-discipline group of inter-NASA center scientists and engineers, net-working and collaborating with representatives of industry and academia, for the purpose of conducting planetary surface exploration-focused remote field exercises. These integrated testing exercises conducted under representative analog Lunar and Mars surface terrain conditions, provide NASA the capability to validate experimental prototype hardware and software systems as well as to evaluate and develop mission operational techniques in order to identify and establish technical requirements and identify potential technology "gaps" applicable for future planetary human exploration. The 2007 D-RATS field campaign test activities were initiated based on the major themes and objectives of a notional 5-year plan developed for conducting relative analog test activities in support of the engineering evaluation and assessment of various system architectural requirements, conceptual prototype support equipment and selected technologies necessary for the establishment of a lunar outpost. Specifically, the major objectives included measuring task efficiency during robot, human, and human-robot interactive tasks associated with lunar outpost site surveying and reconnaissance activities and deployment of a representative solar panel power and distribution system. In addition, technology demonstrations were conducted with a new Lithium-ion battery and autonomous software to coordinate multiple robot activities. Secondary objectives were evaluating airlock concept mockups and prototype removable space suit over-garment elements for dust mitigation, and upgrades to the prototype extravehicular activities (EVA) communication and information system. Dry run test activities, prior to testing at a designated remote field site location, were initially conducted at the Johnson Space Center (JSC) Remote Field Demonstration Test Site. This is a multi

  20. Desert Research and Technology Studies (RATS) 2007 Field Campaign Objectives and Results

    Science.gov (United States)

    Kosmo, Joseph; Romig, Barbara

    2008-01-01

    Desert "RATS" (Research and Technology Studies) is a combined, multi-discipline group of inter-NASA center scientists and engineers, net-working and collaborating with representatives of industry and academia, for the purpose of conducting planetary surface exploration-focused remote field exercises. These integrated testing exercises conducted under representative analog Lunar and Mars surface terrain conditions, provide NASA the capability to validate experimental prototype hardware and software systems as well as to evaluate and develop mission operational techniques in order to identify and establish technical requirements and identify potential technology "gaps" applicable for future planetary human exploration. The 2007 D-RATS field campaign test activities were initiated based on the major themes and objectives of a notional 5-year plan developed for conducting relative analog test activities in support of the engineering evaluation and assessment of various system architectural requirements, conceptual prototype support equipment and selected technologies necessary for the establishment of a lunar outpost. Specifically, the major objectives included measuring task efficiency during robot, human, and human-robot interactive tasks associated with lunar outpost site surveying and reconnaissance activities and deployment of a representative solar panel power and distribution system. In addition, technology demonstrations were conducted with a new Lithium-ion battery and autonomous software to coordinate multiple robot activities. Secondary objectives were evaluating airlock concept mockups and prototype removable space suit over-garment elements for dust mitigation, and upgrades to the prototype extravehicular activities (EVA) communication and information system. Dry run test activities, prior to testing at a designated remote field site location, were initially conducted at the Johnson Space Center (JSC) Remote Field Demonstration Test Site. This is a multi

  1. Object/Shape Recognition Technology: An Assessment of the Feasibility of Implementation at Defense Logistics Agency Disposition Services

    Science.gov (United States)

    2015-02-25

    IV.  ANALYSIS OF THE CURRENT PROPERTY PROCESS AT DEFENSE LOGISTICS AGENCY DISPOSITION SERVICES AND MATURITY ASSESSMENT OF OBJECT/SHAPE RECOGNITION...implement full automation with optical sorting and data mining that included sensors, laser, object/shape recognition technology on conveyor belt...the current state of object/shape recognition technology and assess the feasibility of implementing it at DLA DS. C. RESEARCH QUESTIONS, SCOPE AND

  2. Implementing Internet of Things into Undergraduate Classes:Case Study of a Capstone Research Project%物联网在毕业设计中的应用--以顶点研究项目为例

    Institute of Scientific and Technical Information of China (English)

    Jing Selena He; Amir Atabekov; Yi Pan

    2016-01-01

    本科学位课程已逐渐发展到包括研究类项目在本科生的毕业设计课程里,同时企业越来越需要具有先进技术和研究技能的毕业生。文章详细介绍了一个由2位导师、4位本科生和1位研究生组成的团队,在肯尼索州立大学(KSU)最后一年的毕业设计课程中,设计和实现一个基于物联网(IoT)的概念证明的研究项目的成功经验。物联网涉及连接物理对象或现象到互联网,这提供了利用射频识别(RFID)、近场通信(NFC)、无线传感器网络(WSN)和通用移动访问的先进技术来构建智能化的系统和应用的机会。在这个案例中,办公室/实验室椅子要被连接到互联网。具体而言,一个组装的Arduino系统负责自动扫描用户的ID且获取座椅的占用状态,然后把这些信息发送到云服务器。在云中收集和分析的数据可以在Android的应用程序中显示。该物联网案例的成功就是一个很好的例子,学生在研究过程中学习先进的技术,以跟上计算机科学快速变化的步伐。%Nowadays, the undergraduate degree program has gradually evolved to include research projects in the capstone project class. Moreover, there is a growing need in our local industry for graduates with research skills in advanced technologies.This paper describes the experience of a team of two advisors, four undergraduate students, and one graduate student to design and implement an Internet of Things (IoT)-based research project in a final year capstone project class at Kennesaw State University. The IoT involves connecting physical objects to the Internet, which provide opportunity to build intelligent systems and applications by leveraging Radio-Frequency Identification (RFID), Near Field Communication (NFC), Wireless Sensor Network (WSN), and universal mobile accessibility advanced technologies. In this case study, the office/lab chairs are proposed to connect to the

  3. DISTURBANCE ERROR INVARIANCE IN AUTOMATIC CONTROL SYSTEMS FOR TECHNOLOGICAL OBJECT TRAJECTORY MOVEMENT

    Directory of Open Access Journals (Sweden)

    A. V. Lekareva

    2016-09-01

    Full Text Available We consider combined control in automatic control systems for technological objects trajectory movements. We present research results of the system disturbance invariance ensuring on the example of the technological manipulator that implements hydrocutting of the oil pipelines. Control is based on the propositions of the fourth modified invariance form with the use of bootstrapping methods. The paper presents analysis of results obtained by two different correction methods. The essence of the first method lies in injection of additional component into the already established control signal and formation of the channel for that component. Control signal correction during the signal synthesis stage in the control device constitutes the basis for the second method. Research results have shown high efficiency of application for both correction methods. Both methods have roughly the same precision. We have shown that the correction in the control device is preferable because it has no influence on the inner contour of the system. We have shown the necessity of the block usage with the variable transmission coefficient, which value is determined by technological trajectory parameters. Research results can be applied in practice for improvement of the precision specifications of automatic control systems for trajectorial manipulators.

  4. Implementation of Systems Engineering Practices into a Capstone Course

    Science.gov (United States)

    Murphy, Gloria; Schmidt, Peter

    2011-01-01

    Discusses the NASA Exploration Systems Mission Directorate senior design projects which are to provide students with senior design project ideas, with potential contribution to NASA ESMD objectives. and provides NASA technical representative to act as external customer / technology mentor / requirements source.

  5. Commercial objectives, technology transfer, and systems analysis for fusion power development

    Science.gov (United States)

    Dean, Stephen O.

    1988-03-01

    Fusion is an essentially inexhaustible source of energy that has the potential for economically attractive commercial applications with excellent safety and environmental characteristics. The primary focus for the fusion-energy development program is the generation of centralstation electricity. Fusion has the potential, however, for many other applications. The fact that a large fraction of the energy released in a DT fusion reaction is carried by high-energy neutrons suggests potentially unique applications. These include breeding of fissile fuels, production of hydrogen and other chemical products, transmutation or “burning” of various nuclear or chemical wastes, radiation processing of materials, production of radioisotopes, food preservation, medical diagnosis and medical treatment, and space power and space propulsion. In addition, fusion R&D will lead to new products and new markets. Each fusion application must meet certain standards of economic and safety and environmental attractiveness. For this reason, economics on the one hand, and safety and environment and licensing on the other hand, are the two primary criteria for setting long-range commercial fusion objectives. A major function of systems analysis is to evaluate the potential of fusion against these objectives and to help guide the fusion R&D program toward practical applications. The transfer of fusion technology and skills from the national laboratories and universities to industry is the key to achieving the long-range objective of commercial fusion applications.

  6. Impact of information technology on vendor objectives, capabilities, and competences in contract electronic manufacturing

    DEFF Research Database (Denmark)

    Perunovic, Zoran; Mefford, Robert; Christoffersen, Mads

    2012-01-01

    Many factors influence the success of an outsourcing arrangement but vendor capabilities have been recognized as one of the main contributors. This paper investigates how information technology (IT) utilization contributes to success in outsourcing. We take a vendor's perspective and study how...... IT impacts vendor capabilities. The research framework integrates four concepts/theories: the resource-based view (RBV), the concept of manufacturing strategy, the concept of business performance, and the concept of IT impact on business performance. Two case companies are studied, one with a high level...... of IT development and another for which this is not the case. The results show that IT impacts vendor objectives indirectly by impacting competences and capabilities. Two types of impact of IT on competences and capabilities have been identified: IT as a competence enabler and IT as a capability enhancer. The most...

  7. Consumer-based technology for distribution of surgical videos for objective evaluation.

    Science.gov (United States)

    Gonzalez, Ray; Martinez, Jose M; Lo Menzo, Emanuele; Iglesias, Alberto R; Ro, Charles Y; Madan, Atul K

    2012-08-01

    The Global Operative Assessment of Laparoscopic Skill (GOALS) is one validated metric utilized to grade laparoscopic skills and has been utilized to score recorded operative videos. To facilitate easier viewing of these recorded videos, we are developing novel techniques to enable surgeons to view these videos. The objective of this study is to determine the feasibility of utilizing widespread current consumer-based technology to assist in distributing appropriate videos for objective evaluation. Videos from residents were recorded via a direct connection from the camera processor via an S-video output via a cable into a hub to connect to a standard laptop computer via a universal serial bus (USB) port. A standard consumer-based video editing program was utilized to capture the video and record in appropriate format. We utilized mp4 format, and depending on the size of the file, the videos were scaled down (compressed), their format changed (using a standard video editing program), or sliced into multiple videos. Standard available consumer-based programs were utilized to convert the video into a more appropriate format for handheld personal digital assistants. In addition, the videos were uploaded to a social networking website and video sharing websites. Recorded cases of laparoscopic cholecystectomy in a porcine model were utilized. Compression was required for all formats. All formats were accessed from home computers, work computers, and iPhones without difficulty. Qualitative analyses by four surgeons demonstrated appropriate quality to grade for these formats. Our preliminary results show promise that, utilizing consumer-based technology, videos can be easily distributed to surgeons to grade via GOALS via various methods. Easy accessibility may help make evaluation of resident videos less complicated and cumbersome.

  8. Automated Micro-Object Detection for Mobile Diagnostics Using Lens-Free Imaging Technology

    Directory of Open Access Journals (Sweden)

    Mohendra Roy

    2016-05-01

    Full Text Available Lens-free imaging technology has been extensively used recently for microparticle and biological cell analysis because of its high throughput, low cost, and simple and compact arrangement. However, this technology still lacks a dedicated and automated detection system. In this paper, we describe a custom-developed automated micro-object detection method for a lens-free imaging system. In our previous work (Roy et al., we developed a lens-free imaging system using low-cost components. This system was used to generate and capture the diffraction patterns of micro-objects and a global threshold was used to locate the diffraction patterns. In this work we used the same setup to develop an improved automated detection and analysis algorithm based on adaptive threshold and clustering of signals. For this purpose images from the lens-free system were then used to understand the features and characteristics of the diffraction patterns of several types of samples. On the basis of this information, we custom-developed an automated algorithm for the lens-free imaging system. Next, all the lens-free images were processed using this custom-developed automated algorithm. The performance of this approach was evaluated by comparing the counting results with standard optical microscope results. We evaluated the counting results for polystyrene microbeads, red blood cells, and HepG2, HeLa, and MCF7 cells. The comparison shows good agreement between the systems, with a correlation coefficient of 0.91 and linearity slope of 0.877. We also evaluated the automated size profiles of the microparticle samples. This Wi-Fi-enabled lens-free imaging system, along with the dedicated software, possesses great potential for telemedicine applications in resource-limited settings.

  9. Underwater reflectance transformation imaging: a technology for in situ underwater cultural heritage object-level recording

    Science.gov (United States)

    Selmo, David; Sturt, Fraser; Miles, James; Basford, Philip; Malzbender, Tom; Martinez, Kirk; Thompson, Charlie; Earl, Graeme; Bevan, George

    2017-01-01

    There is an increasing demand for high-resolution recording of in situ underwater cultural heritage. Reflectance transformation imaging (RTI) has a proven track record in terrestrial contexts for acquiring high-resolution diagnostic data at small scales. The research presented here documents the first adaptation of RTI protocols to the subaquatic environment, with a scuba-deployable method designed around affordable off-the-shelf technologies. Underwater RTI (URTI) was used to capture detail from historic shipwrecks in both the Solent and the western Mediterranean. Results show that URTI can capture submillimeter levels of qualitative diagnostic detail from in situ archaeological material. In addition, this paper presents the results of experiments to explore the impact of turbidity on URTI. For this purpose, a prototype fixed-lighting semisubmersible RTI photography dome was constructed to allow collection of data under controlled conditions. The signal-to-noise data generated reveals that the RGB channels of underwater digital images captured in progressive turbidity degraded faster than URTI object geometry calculated from them. URTI is shown to be capable of providing analytically useful object-level detail in conditions that would render ordinary underwater photography of limited use.

  10. Geoethics As a Key Component to an Undergraduate Capstone Experience

    Science.gov (United States)

    Geissman, J. W.; McFadden, L. D.

    2014-12-01

    We have taught a required, senior, capstone course, with a focus on geoscience communication, for almost 35 years. While both of us were at the University of New Mexico, we alternated responsibility for teaching this course. The first author continues to teach a similar course at the University of Texas at Dallas. As the course has evolved and new approaches taken, we have incorporated more and more subject matter related to ethics in science and in particular the geological sciences. Our experiences indicate that (1) students are typically enthralled by and curious about the subject, (2) students have received little if any exposure to the subject in any form of formal classroom environment, and (3) students have personally experienced situations or have learned of situations from their peers that have left them in an uncomfortable position and left them questioning the appropriateness of the actions witnessed. We typically introduce the subject of GeoEthics by drawing students' attention to the many Codes of Ethics or Professional Conduct assembled by Geoscience societies. Many students are quick to volunteer their experiences related to specific topics. For example, the statement in the Geological Society of America Code of Conduct, "Geoscientists should treat associates with respect, regardless of the level of their formal education, encourage them, learn with them, share ideas honestly, and give credit for their contributions" often incites lively discussion and reveals repeated behavior by some individuals.

  11. 78 FR 56263 - HydroGen Corp., QueryObject Systems Corp., Security Intelligence Technologies, Inc., Skins, Inc...

    Science.gov (United States)

    2013-09-12

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION HydroGen Corp., QueryObject Systems Corp., Security Intelligence Technologies, Inc., Skins, Inc... and accurate information concerning the securities of Security Intelligence Technologies, Inc. because...

  12. Physical Learning Environment and its Suitability to the Objectives of Technology Education

    Science.gov (United States)

    Soobik, Mart

    2013-01-01

    The present article focuses on Technology Education teachers' opinions on the physical learning environment of Technology Education. The study compares and analyses the changes in the physical learning environment of Technology Education. Two questionnaire surveys (Study I and Study II) were carried out among teachers of Technology Education…

  13. How to object to radically new technologies on the basis of justice: the case of synthetic biology.

    Science.gov (United States)

    Hunter, David

    2013-10-01

    A recurring objection to the exploration, development and deployment of radical new technologies is based on their implications with regards to social justice. In this article, using synthetic biology as an example, I explore this line of objection and how we ought to think about justice in the context of the development and introduction of radically new technologies. I argue that contrary to popular opinion, justice rarely provides a reason not to investigate, develop and introduce radical new technologies, although it may have significant implications for how they ought to be introduced. In particular I focus on the time dependency of justice objections and argue that often these function by looking only at the implications of the introduction of the technology at the point of introduction, rather than the more important long-term impact on patterns of distribution and opportunity.

  14. Balancing Instructional Techniques and Delivery Formats in Capstone Business Strategy Courses

    Science.gov (United States)

    Alstete, Jeffrey W.; Beutell, Nicholas J.

    2016-01-01

    Purpose: The purpose of this paper is to contend that collegiate programs should carefully plan their capstone courses in light of the educational mission, pedagogical content knowledge, instructional techniques and delivery formats. Design/methodology/approach: This is a concept paper with elements of theory building from the case of business…

  15. Planning "and" Sprinting: Use of a Hybrid Project Management Methodology within a CIS Capstone Course

    Science.gov (United States)

    Baird, Aaron; Riggins, Frederick J.

    2012-01-01

    An increasing number of information systems projects in industry are managed using hybrid project management methodologies, but this shift in project management methods is not fully represented in our CIS curriculums. CIS capstone courses often include an applied project that is managed with traditional project management methods (plan first,…

  16. Assessing a Writing Intensive General Education Capstone: Research as Faculty Development

    Science.gov (United States)

    Parrish, Juli; Hesse, Doug; Bateman, Geoffrey

    2016-01-01

    We explain how collaboratively assessing a writing-intensive general education capstone seminar constituted a high-impact practice for faculty development. Students at the University of Denver complete an Advanced Seminar taught by faculty across the curriculum. Topics and themes vary widely, as do types of assigned writing, making assessment an…

  17. Investigating the Use of Design Methods by Capstone Design Students at Clemson University

    Science.gov (United States)

    Miller, W. Stuart; Summers, Joshua D.

    2013-01-01

    The authors describe a preliminary study to understand the attitude of engineering students regarding the use of design methods in projects to identify the factors either affecting or influencing the use of these methods by novice engineers. A senior undergraduate capstone design course at Clemson University, consisting of approximately fifty…

  18. The comprehensive examination: a viable master's of science in nursing capstone course.

    Science.gov (United States)

    Oehrtman, Sandra Jean; Smolen, Dianne; Hoblet, Karen; Phillips, Kelly A

    2010-01-01

    The purpose of this article was to describe the process of how The University of Toledo College of Nursing developed the comprehensive examination as one capstone option to fulfill the requirements of a master's of science in nursing degree. Based on Keating's frame factors model, a review of existing literature, and an informal review of master's programs in nursing in the geographic area, an assessment was made of the viability of offering a comprehensive examination as a capstone experience. Increased student enrollment, need for flexible courses, faculty and student demographics, and institutional and national accreditation requirements were some of the factors that led to the decision to develop a comprehensive examination as a capstone option. The comprehensive examination has proven to be an educationally sound capstone option that was different from the traditional thesis or scholarly project. Benefits of the comprehensive examination have included increased faculty collegiality in writing and reading questions and answers, student satisfaction as evidenced by their evaluative written and verbal comments, and improved utilization of faculty related to workload and overall resources.

  19. Journal Writing in a Mathematics Capstone Course for Prospective Secondary Teachers: Future Teachers Making Connections

    Science.gov (United States)

    Rogers, Kimberly Cervello

    2014-01-01

    In the context of a Capstone course for prospective secondary teachers (PSTs) of mathematics, this paper examines how a journal assignment was implemented and how it can help us understand PSTs' views of mathematics and mathematics teaching. First, the course design and specifics of the assignment are described. Then, details about…

  20. "Why" and "How" We Can Teach Social Entrepreneurship in a Capstone Course

    Science.gov (United States)

    Fenton, Mark

    2012-01-01

    Social entrepreneurship, while not a new term, does not have a universal definition. Teaching entrepreneurship in a comprehensive university capstone course often includes a formal business plan project. By incorporating concepts of social entrepreneurship, students develop an awareness of entrepreneurship beyond a more traditional approach. This…

  1. Virginia's College and Career Ready Initiative Grade 12 English Capstone Course Content and Performance Expectations

    Science.gov (United States)

    Virginia Department of Education, 2011

    2011-01-01

    Virginia's "College and Career Ready English Performance Expectations" grade 12 capstone course contains high-interest contextualized content designed to give certain students an additional boost for competent and successful entry into college and careers. The course will add to students' preparation for critical reading, college and…

  2. Capstone Interdisciplinary Team Project: A Requirement for the MS in Sustainability Degree

    Science.gov (United States)

    Jiji, Latif M.; Schonfeld, Irvin Sam; Smith, George A.

    2015-01-01

    Purpose: This paper aims to describe experience gained with a required six-credit year-long course, the Capstone Interdisciplinary Team Project, a key component of the Master of Science (MS) in Sustainability degree at the City College of New York. A common feature of sustainability problems is their interdisciplinary nature. Solutions to…

  3. Full Speed Ahead: Using a Senior Capstone Course to Facilitate Students' Professional Transition

    Science.gov (United States)

    Appleby, Karen M.; Foster, Elaine; Kamusoko, Sibongile

    2016-01-01

    In recent years, institutions of higher education have become more focused on preparing students for their professional lives through senior seminars and capstone courses. Specifically in the fields of physical education, recreation and dance (PERD), it is strongly recommended by both the Commission on Sport Management Accreditation and SHAPE…

  4. The Molecular Biology Capstone Assessment: A Concept Assessment for Upper-Division Molecular Biology Students

    Science.gov (United States)

    Couch, Brian A.; Wood, William B.; Knight, Jennifer K.

    2015-01-01

    Measuring students' conceptual understandings has become increasingly important to biology faculty members involved in evaluating and improving departmental programs. We developed the Molecular Biology Capstone Assessment (MBCA) to gauge comprehension of fundamental concepts in molecular and cell biology and the ability to apply these concepts in…

  5. Reflections on the Final Year Learning Experience--Designing a Capstone Experience

    Science.gov (United States)

    Thomas, Keith; Wong, Kin Chi; Li, Yi Ching; Hung, Ching Yan

    2013-01-01

    Cross-sector educational reform to be implemented in 2012 in Hong Kong (HK) is intended principally to prepare students for the future workplace. One of the explicit requirements for the new four-year undergraduate curriculum is the inclusion of a capstone course for final year students. This paper explores the uptake and reported effect of the…

  6. Student and Staff Perceptions of Key Aspects of Computer Science Engineering Capstone Projects

    Science.gov (United States)

    Olarte, Juan José; Dominguez, César; Jaime, Arturo; Garcia-Izquierdo, Francisco José

    2016-01-01

    In carrying out their capstone projects, students use knowledge and skills acquired throughout their degree program to create a product or provide a technical service. An assigned advisor guides the students and supervises the work, and a committee assesses the projects. This study compares student and staff perceptions of key aspects of…

  7. The Undergraduate Capstone Course in the Social Sciences: Results from a Regional Survey

    Science.gov (United States)

    Hauhart, Robert C.; Grahe, Jon E.

    2010-01-01

    Among the common requirements for receipt of a degree in the social sciences is the completion of a senior seminar in which a senior thesis or capstone project is produced. A number of educational goals have been proposed for this requirement: integrating the knowledge base supplied by the regular curriculum, contributing to students' future roles…

  8. Capstone Interdisciplinary Team Project: A Requirement for the MS in Sustainability Degree

    Science.gov (United States)

    Jiji, Latif M.; Schonfeld, Irvin Sam; Smith, George A.

    2015-01-01

    Purpose: This paper aims to describe experience gained with a required six-credit year-long course, the Capstone Interdisciplinary Team Project, a key component of the Master of Science (MS) in Sustainability degree at the City College of New York. A common feature of sustainability problems is their interdisciplinary nature. Solutions to…

  9. Creating International Community Service Learning Experiences in a Capstone Marketing-Projects Course

    Science.gov (United States)

    Metcalf, Lynn E.

    2010-01-01

    This article outlines the development of a project-based capstone marketing course, specifically designed to provide marketing students with an international community service learning experience. It differs significantly from previous studies, which focus on integrating service learning into existing marketing courses and on helping local…

  10. Promoting Active Engagement in Health Research: Lessons from an Undergraduate Gerontology Capstone Course

    Science.gov (United States)

    Robbins, Emily J.; Kinney, Jennifer M.; Kart, Cary S.

    2008-01-01

    With National Institutes of Health/National Institute of Aging (NIH/NIA) (R15/AREA) funding, the authors offered a four-credit hour undergraduate research course that was cross-listed in gerontology and sociology. This capstone course was aimed at providing students with the opportunity to (1) gain knowledge about diabetes and racial/ethnic…

  11. "Why" and "How" We Can Teach Social Entrepreneurship in a Capstone Course

    Science.gov (United States)

    Fenton, Mark

    2012-01-01

    Social entrepreneurship, while not a new term, does not have a universal definition. Teaching entrepreneurship in a comprehensive university capstone course often includes a formal business plan project. By incorporating concepts of social entrepreneurship, students develop an awareness of entrepreneurship beyond a more traditional approach. This…

  12. Empowering Students to Create Better Virtual Reality Applications: A Longitudinal Study of a VR Capstone Course

    Science.gov (United States)

    Takala, Tuukka M.; Malmi, Lauri; Pugliese, Roberto; Takala, Tapio

    2016-01-01

    In this paper we present our experiences of teaching an annually organized virtual reality (VR) capstone course. We review three iterations of the course, during which a total of 45 students completed the course and 16 VR applications were implemented. Our comparative analysis describes the students' evaluation of the course, the applications…

  13. Planning "and" Sprinting: Use of a Hybrid Project Management Methodology within a CIS Capstone Course

    Science.gov (United States)

    Baird, Aaron; Riggins, Frederick J.

    2012-01-01

    An increasing number of information systems projects in industry are managed using hybrid project management methodologies, but this shift in project management methods is not fully represented in our CIS curriculums. CIS capstone courses often include an applied project that is managed with traditional project management methods (plan first,…

  14. Preparation for Full Time Employment: A Capstone Experience for Students in Leadership Programs

    Science.gov (United States)

    Gifford, Gregory T.; Cannon, Karen J.; Stedman, Nicole L.; Telg, Ricky W.

    2011-01-01

    This practice paper describes the development and implementation of a senior capstone course for communication and leadership development for undergraduate students. The resulting course is a unique combination of experiential skill development and career preparation. The success of this course provides students with an important and meaningful…

  15. Advanced Internship: A High-Impact, Low-Cost, Super-Capstone Course

    Science.gov (United States)

    Fernald, Peter S.; Goldstein, Gary S.

    2013-01-01

    In an earlier issue of this journal, the authors described a capstone course, Internship, that both "caps" the undergraduate experience and functions as a "bridge" to the world beyond college. Here, they describe a sequel to that course, Advanced Internship, which both extends and enhances the "capping" and "bridging" experiences. The bridging…

  16. Creating International Community Service Learning Experiences in a Capstone Marketing-Projects Course

    Science.gov (United States)

    Metcalf, Lynn E.

    2010-01-01

    This article outlines the development of a project-based capstone marketing course, specifically designed to provide marketing students with an international community service learning experience. It differs significantly from previous studies, which focus on integrating service learning into existing marketing courses and on helping local…

  17. On the Research Objects of Educational Technology%也论教育技术学的研究对象

    Institute of Scientific and Technical Information of China (English)

    马启龙

    2014-01-01

    确定独特的研究对象、构建完整的理论体系、发展专门的研究方法是学科独立、成熟的三大标志。为论证教育技术学的独立性和成熟性,在研究了教育技术学的完整理论体系和专门研究方法两个标志的基础之上,本文首先分别运用历史方法和逻辑方法多层次解析了教育技术学的研究对象;然后,根据确定研究对象的抽象概括原则,将教育技术学的研究对象抽象概括为:教育的技术化和系统化。%Determining its unique research objects, Constructing a complete theoretical system, and developing special-ized research methods are three characteristics of an independent and mature field. Among these three objects, the re-search object is the most fundamental. A clear understanding of research objects helps to avoid the research blind are-as, set up the complete theoretical system of subjects, and develop specialized research methods. To determine the re-search object is also beneficial to the division of human research field and cooperation in research activities To determine the independence and maturity of Educational Technology, this paper uses historical and logical methods to analyze the research objects in the field of educational technology based on a study of its theoretical system and research methods. The historical method is to analyze the research content in the history of a subject, then to abstract and general-ize. The logical method is to toanalyze the attribute and the nature of a subject, then to abstract and generalize. Using historical method to analyze the research objects of Educational Technology,we can abstract out four as-pects of the research object application of visual media in education, First, from the four stages of development of for-eign educational technology, application of audio-visual media in education, the design and use of messages which control the learning process, the design, development, utilization

  18. The Objective Force Soldier/Soldier Team. Volume II - The Science and Technology Challenges

    Science.gov (United States)

    2001-11-01

    Number 703767-9007 DSN 427-9007 Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39.18 DISCLAIMER This report is the product of the Army Science...MOSAIC. Commercial technology air interfaces and protocols, such as CDMA , Bluetooth, and Personnel Data Assistants (PDAs) will provide technology

  19. Using Task Data in Diagnostic Radiology. Research Report No. 8. Volume 2. Curriculum Objectives for Radiologic Technology.

    Science.gov (United States)

    Gilpatrick, Eleanor; Gullion, Christina

    This volume is the result of the application of the Health Services Mobility Study (HSMS) curriculum design method in radiologic technology and is presented in conjunction with volume 1, which reports the task analysis results. Volume 2 contains job-related behavioral curriculum objectives for the aide, technician, and technologist levels in…

  20. NASA JPL Distributed Systems Technology (DST) Object-Oriented Component Approach for Software Inter-Operability and Reuse

    Science.gov (United States)

    Hall, Laverne; Hung, Chaw-Kwei; Lin, Imin

    2000-01-01

    The purpose of this paper is to provide a description of NASA JPL Distributed Systems Technology (DST) Section's object-oriented component approach to open inter-operable systems software development and software reuse. It will address what is meant by the terminology object component software, give an overview of the component-based development approach and how it relates to infrastructure support of software architectures and promotes reuse, enumerate on the benefits of this approach, and give examples of application prototypes demonstrating its usage and advantages. Utilization of the object-oriented component technology approach for system development and software reuse will apply to several areas within JPL, and possibly across other NASA Centers.

  1. Aerial visible-thermal infrared hyperspectral feature extraction technology and its application to object identification

    Science.gov (United States)

    Jie-lin, Zhang; Jun-hu, Wang; Mi, Zhou; Yan-ju, Huang; Ding, Wu

    2014-03-01

    Based on aerial visible-thermal infrared hyperspectral imaging system (CASI/SASI/TASI) data, field spectrometer data and multi-source geological information, this paper utilizes the hyperspectral data processing and feature extraction technology to identify uranium mineralization factors, the spectral features of typical tetravalent, hexavalent uranium minerals and mineralization factors are established, and hyperspectral logging technology for drill cores and trench also are developed, the relationships between radioactive intensity and spectral characteristics are built. Above methods have been applied to characterize uranium mineralization setting of granite-type and sandstone-type uranium deposits in south and northwest China, the successful outcomes of uranium prospecting have been achieved.

  2. IMPROVING THREE-DIMENSIONAL OBJECT VISUALIZATION USER INTERFACE WITH AUGMENTED REALITY TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Kravtsov �. M.

    2014-06-01

    Full Text Available The article describes hardware and software specific issues of implementing augmented reality for improving user interface of visualization of a virtual object. It also defines possible future improvements of the subject

  3. The Technological Mediation of Morality - A Post-Phenomenological Approach to Moral Subjectivity and Moral Objectivity

    NARCIS (Netherlands)

    Verbeek, Peter P.C.C.

    2007-01-01

    This paper analyzes the moral relevance of technological artifacts and its possible role in ethical theory, by taking the postphenomenological approach that has developed around the work of Don Ihde into the domain of ethics. By elaborating a postphenomenological analysis of the mediating role of ul

  4. The Technological Mediation of Morality - A Post-Phenomenological Approach to Moral Subjectivity and Moral Objectivity

    NARCIS (Netherlands)

    Verbeek, Peter P.C.C.

    2007-01-01

    This paper analyzes the moral relevance of technological artifacts and its possible role in ethical theory, by taking the postphenomenological approach that has developed around the work of Don Ihde into the domain of ethics. By elaborating a postphenomenological analysis of the mediating role of

  5. The Technological Mediation of Morality - A Post-Phenomenological Approach to Moral Subjectivity and Moral Objectivity

    NARCIS (Netherlands)

    Verbeek, Peter-Paul

    2007-01-01

    This paper analyzes the moral relevance of technological artifacts and its possible role in ethical theory, by taking the postphenomenological approach that has developed around the work of Don Ihde into the domain of ethics. By elaborating a postphenomenological analysis of the mediating role of ul

  6. A capstone teaching project for undergraduate nursing students: development of a visual teaching-learning tool.

    Science.gov (United States)

    Epstein, Carol D

    2007-05-01

    The purpose of this article is to describe an original teaching-learning capstone project designed to promote active learning by senior nursing students as they transition to professional practice. The centerpiece of the capstone experience is the creation of a three-dimensional educational tool called a Visual Project, which addresses the learning needs of patients, their families, or the nursing staff. Students create their project during the spring semester of their senior year, when they are paired with an experienced, baccalaureate-prepared nurse preceptor. Students present their projects to both the nursing unit in which they worked and the faculty and students of the nursing school. Students consistently express a sense of accomplishment when they present their projects and recognize that they themselves have undergone the same teaching-learning process that was the focus of their project.

  7. Towards a Sound Pedagogy in Law: A Constitutionally Informed Dissertation as Capstone Course in the LLB Degree Programme

    Directory of Open Access Journals (Sweden)

    Andrea Bauling

    2017-04-01

    Full Text Available The Bachelor of Laws (LLB degree programme should adequately prepare graduates for the demands set by both legal practice and the greater South African society. Law schools are not tasked with producing future legal practitioners, but rather critical thinkers who can engage with the relationship between law and society in a meaningful way, and who recognise their duty to uphold the values of the Constitution of the Republic of South Africa, 1996 when performing their professional duties. Resultantly law teachers should construct learning environments that engage students in ways that help them develop creativity; embedded subject knowledge; and autonomous learning, critical thinking, and lifelong learning skills. A well-structured LLB degree programme should focus on this broader conception of legal education and a dissertation module as capstone course should be closely aligned with this objective. A greater academic influence could result in an academically rigorous degree programme that produces more mature graduates who possess competencies and attributes that exceed that which is demanded of them by legal practice. One way to establish a greater academic influence in a degree programme would be to include a final year dissertation module which demands that students illustrate the ability to think critically. The final year of a degree programme should provide the student with several opportunities aimed at culminating the learning experience and consolidating the skills and knowledge acquired throughout the preceding years of study. Capstone courses facilitate in-depth learning and should be employed to teach crucial skills related to the purpose of the degree. A compulsory dissertation module as capstone course, which embodies the pedagogical approach of transformative legal education, should be included in the revised curriculum of all law schools in South Africa. This dissertation module should demand that students engage critically with

  8. Internet of Things based on smart objects technology, middleware and applications

    CERN Document Server

    Trunfio, Paolo

    2014-01-01

    The Internet of Things (IoT) usually refers to a world-wide network of interconnected heterogeneous objects (sensors, actuators, smart devices, smart objects, RFID, embedded computers, etc) uniquely addressable, based on standard communication protocols. Beyond such a definition, it is emerging a new definition of IoT seen as a loosely coupled, decentralized system of cooperating smart objects (SOs). A SO is an autonomous, physical digital object augmented with sensing/actuating, processing, storing, and networking capabilities. SOs are able to sense/actuate, store, and interpret information created within themselves and around the neighbouring external world where they are situated, act on their own, cooperate with each other, and exchange information with other kinds of electronic devices and human users. However, such SO-oriented IoT raises many in-the-small and in-the-large issues involving SO programming, IoT system architecture/middleware and methods/methodologies for the development of SO-based applica...

  9. Integrating Spherical Panoramas and Maps for Visualization of Cultural Heritage Objects Using Virtual Reality Technology.

    Science.gov (United States)

    Koeva, Mila; Luleva, Mila; Maldjanski, Plamen

    2017-04-11

    Development and virtual representation of 3D models of Cultural Heritage (CH) objects has triggered great interest over the past decade. The main reason for this is the rapid development in the fields of photogrammetry and remote sensing, laser scanning, and computer vision. The advantages of using 3D models for restoration, preservation, and documentation of valuable historical and architectural objects have been numerously demonstrated by scientists in the field. Moreover, 3D model visualization in virtual reality has been recognized as an efficient, fast, and easy way of representing a variety of objects worldwide for present-day users, who have stringent requirements and high expectations. However, the main focus of recent research is the visual, geometric, and textural characteristics of a single concrete object, while integration of large numbers of models with additional information-such as historical overview, detailed description, and location-are missing. Such integrated information can be beneficial, not only for tourism but also for accurate documentation. For that reason, we demonstrate in this paper an integration of high-resolution spherical panoramas, a variety of maps, GNSS, sound, video, and text information for representation of numerous cultural heritage objects. These are then displayed in a web-based portal with an intuitive interface. The users have the opportunity to choose freely from the provided information, and decide for themselves what is interesting to visit. Based on the created web application, we provide suggestions and guidelines for similar studies. We selected objects, which are located in Bulgaria-a country with thousands of years of history and cultural heritage dating back to ancient civilizations. The methods used in this research are applicable for any type of spherical or cylindrical images and can be easily followed and applied in various domains. After a visual and metric assessment of the panoramas and the evaluation of

  10. Applications of Capstone Depleted Uranium Aerosol Risk Data to Military Combat Risk Management

    Energy Technology Data Exchange (ETDEWEB)

    Daxon, Eric G.; Parkhurst, MaryAnn; Melanson, Mark A.; Roszell, Laurie E.

    2009-03-01

    Risks to personnel engaged in military operations include not only the threat of enemy firepower but also risks from exposure to other hazards such as radiation. Combatant commanders of the U. S. Army carefully weigh risks of casualties before implementing battlefield actions using an established paradigm that take these risks into consideration. As a result of the inclusion of depleted uranium (DU) anti-armor ammunition in the conventional (non-nuclear) weapons arsenal, the potential for exposure to DU aerosols and its associated chemical and radiological effects becomes an element of the commanders’ risk assessment. The Capstone DU Aerosol Study measured the range of likely DU oxide aerosol concentrations created inside a combat vehicle perforated with a DU munition, and the Capstone Human Health Risk Assessment (HHRA) estimated the associated doses and calculated risks. This paper focuses on the development of a scientific approach to adapt the risks from DU’s non uniform dose distribution within the body using the current U.S. Department of Defense (DoD) radiation risk management approach. The approach developed equates the Radiation Exposure Status (RES) categories to the estimated radiological risks of DU and makes use of the Capstone-developed Renal Effects Group (REG) as a measure of chemical risk from DU intake. Recommendations are provided for modifying Army guidance and policy in order to better encompass the potential risks from DU aerosol inhalation during military operations.

  11. NASA/University JOint VEnture (JOVE) Program. VIXEN(tm): Object-Oriented, Technology-Adaptive, Virtual Information Exchange Environment

    Science.gov (United States)

    Anyiwo, Joshua C.

    2000-01-01

    Vixen is a collection of enabling technologies for uninhibited distributed object computing. In the Spring of 1995 when Vixen was proposed, it was an innovative idea very much ahead of its time. But today the technologies proposed in Vixen have become standard technologies for Enterprise Computing. Sun Microsystems J2EE/EJB specifications, among others, are independently proposed technologies of the Vixen type. I have brought Vixen completely under the J2EE standard in order to maximize interoperability and compatibility with other computing industry efforts. Vixen and the Enterprise JavaBean (EJB) Server technologies are now practically identical; OIL, another Vixen technology, and the Java Messaging System (JMS) are practically identical; and so on. There is no longer anything novel or patentable in the Vixen work performed under this grant. The above discussion, notwithstanding, my independent development of Vixen has significantly helped me, my university, my students and the local community. The undergraduate students who worked with me in developing Vixen have enhanced their expertise in what has become the cutting edge technology of their industry and are therefore well positioned for lucrative employment opportunities in the industry. My academic department has gained a new course: "Multi-media System Development", which provides a highly desirable expertise to our students for employment in any enterprise today. The many Outreach Programs that I conducted during this grant period have exposed local Middle School students to the contributions that NASA is making in our society as well as awakened desires in many such students for careers in Science and Technology. I have applied Vixen to the development of two software packages: (a) JAS: Joshua Application Server - which allows a user to configure an EJB Server to serve a J2EE compliant application over the world wide web; (b) PCM: Professor Course Manager: a J2EE compliant application for configuring a

  12. Guest Editor's introduction: Selected papers from the 4th USENIX Conference on Object-Oriented Technologies and Systems

    Science.gov (United States)

    Sventek, Joe

    1998-12-01

    Hewlett-Packard Laboratories, 1501 Page Mill Road, Palo Alto, CA 94304, USA Introduction The USENIX Conference on Object-Oriented Technologies and Systems (COOTS) is held annually in the late spring. The conference evolved from a set of C++ workshops that were held under the auspices of USENIX, the first of which met in 1989. Given the growing diverse interest in object-oriented technologies, the C++ focus of the workshop eventually became too narrow, with the result that the scope was widened in 1995 to include object-oriented technologies and systems. COOTS is intended to showcase advanced R&D efforts in object-oriented technologies and software systems. The conference emphasizes experimental research and experience gained by using object-oriented techniques and languages to build complex software systems that meet real-world needs. COOTS solicits papers in the following general areas: application of, and experiences with, object-oriented technologies in particular domains (e.g. financial, medical, telecommunication); the architecture and implementation of distributed object systems (e.g. CORBA, DCOM, RMI); object-oriented programming and specification languages; object-oriented design and analysis. The 4th meeting of COOTS was held 27 - 30 April 1998 at the El Dorado Hotel, Santa Fe, New Mexico, USA. Several tutorials were given. The technical program proper consisted of a single track of six sessions, with three paper presentations per session. A keynote address and a provocative panel session rounded out the technical program. The program committee reviewed 56 papers, selecting the best 18 for presentation in the technical sessions. While we solicit papers across the spectrum of applications of object-oriented technologies, this year there was a predominance of distributed, object-oriented papers. The accepted papers reflected this asymmetry, with 15 papers on distributed objects and 3 papers on object-oriented languages. The papers in this special issue are

  13. The Concert system - Compiler and runtime technology for efficient concurrent object-oriented programming

    Science.gov (United States)

    Chien, Andrew A.; Karamcheti, Vijay; Plevyak, John; Sahrawat, Deepak

    1993-01-01

    Concurrent object-oriented languages, particularly fine-grained approaches, reduce the difficulty of large scale concurrent programming by providing modularity through encapsulation while exposing large degrees of concurrency. Despite these programmability advantages, such languages have historically suffered from poor efficiency. This paper describes the Concert project whose goal is to develop portable, efficient implementations of fine-grained concurrent object-oriented languages. Our approach incorporates aggressive program analysis and program transformation with careful information management at every stage from the compiler to the runtime system. The paper discusses the basic elements of the Concert approach along with a description of the potential payoffs. Initial performance results and specific plans for system development are also detailed.

  14. Object Motion Detection System Using Passive UHF RFID Technology For A Trauma Bay

    Directory of Open Access Journals (Sweden)

    Young Ho Lee

    2015-08-01

    Full Text Available There has been demands of context-aware systems in a hospital domain and several types of sensors have been applied as sources of medical activities. Unlike the previous passive RFID use of simply identifying objects this paper presents a system for motion detection of medical objects in a trauma bay by ranging the received signal strength indication RSSI using UHF passive RFID tags as one of those sensors that provide information on medical activities. To use passive RFID RSSI for motion detection Three different types of RSSI estimators are evaluated to process noisy RSSI and the adaptive threshold is proposed in the system to improve the resolution of detecting motion. Our system has been tested with recorded RSSI values in a laboratory and an actual trauma bay during simulated resuscitations performed by trauma teams. The proposed system has achieved 85.9 - 92.1 accuracies for most passive items that are used in a trauma bay.

  15. The Concert system - Compiler and runtime technology for efficient concurrent object-oriented programming

    Science.gov (United States)

    Chien, Andrew A.; Karamcheti, Vijay; Plevyak, John; Sahrawat, Deepak

    1993-01-01

    Concurrent object-oriented languages, particularly fine-grained approaches, reduce the difficulty of large scale concurrent programming by providing modularity through encapsulation while exposing large degrees of concurrency. Despite these programmability advantages, such languages have historically suffered from poor efficiency. This paper describes the Concert project whose goal is to develop portable, efficient implementations of fine-grained concurrent object-oriented languages. Our approach incorporates aggressive program analysis and program transformation with careful information management at every stage from the compiler to the runtime system. The paper discusses the basic elements of the Concert approach along with a description of the potential payoffs. Initial performance results and specific plans for system development are also detailed.

  16. New measurement technology for diagnostic evaluation of stress and deformation states in building objects

    Science.gov (United States)

    Kollataj, Robert; Kollataj, Jerzy

    2001-08-01

    This paper presents a new wireless measurement method for static and dynamic examination of buildings, bridges, masts, towers, steel structures, silos etc. by using new generation telemetric modules operating in intelligent radio network. The system provides a possibility of steel and reinforced concrete structures evaluation by measurement of mechanical stresses, deformation and temperature - depending on used sensor. Developed and built prototype system can be used for the on line monitoring, quality assessment and the usefulness of the building objects over long time periods.

  17. [An object-based information extraction technology for dominant tree species group types].

    Science.gov (United States)

    Tian, Tian; Fan, Wen-yi; Lu, Wei; Xiao, Xiang

    2015-06-01

    Information extraction for dominant tree group types is difficult in remote sensing image classification, howevers, the object-oriented classification method using high spatial resolution remote sensing data is a new method to realize the accurate type information extraction. In this paper, taking the Jiangle Forest Farm in Fujian Province as the research area, based on the Quickbird image data in 2013, the object-oriented method was adopted to identify the farmland, shrub-herbaceous plant, young afforested land, Pinus massoniana, Cunninghamia lanceolata and broad-leave tree types. Three types of classification factors including spectral, texture, and different vegetation indices were used to establish a class hierarchy. According to the different levels, membership functions and the decision tree classification rules were adopted. The results showed that the method based on the object-oriented method by using texture, spectrum and the vegetation indices achieved the classification accuracy of 91.3%, which was increased by 5.7% compared with that by only using the texture and spectrum.

  18. Moving Object Tracking and Avoidance Algorithm for Differential Driving AGV Based on Laser Measurement Technology

    Directory of Open Access Journals (Sweden)

    Pandu Sandi Pratama

    2012-12-01

    Full Text Available This paper proposed an algorithm to track the obstacle position and avoid the moving objects for differential driving Automatic Guided Vehicles (AGV system in industrial environment. This algorithm has several abilities such as: to detect the moving objects, to predict the velocity and direction of moving objects, to predict the collision possibility and to plan the avoidance maneuver. For sensing the local environment and positioning, the laser measurement system LMS-151 and laser navigation system NAV-200 are applied. Based on the measurement results of the sensors, the stationary and moving obstacles are detected and the collision possibility is calculated. The velocity and direction of the obstacle are predicted using Kalman filter algorithm. Collision possibility, time, and position can be calculated by comparing the AGV movement and obstacle prediction result obtained by Kalman filter. Finally the avoidance maneuver using the well known tangent Bug algorithm is decided based on the calculation data. The effectiveness of proposed algorithm is verified using simulation and experiment. Several examples of experiment conditions are presented using stationary obstacle, and moving obstacles. The simulation and experiment results show that the AGV can detect and avoid the obstacles successfully in all experimental condition. [Keywords— Obstacle avoidance, AGV, differential drive, laser measurement system, laser navigation system].

  19. A Modified Challenge-Based Learning Approach in a Capstone Course to Improve Student Satisfaction and Engagement

    Directory of Open Access Journals (Sweden)

    Scott E. Gabriel

    2014-08-01

    Full Text Available Advanced Biochemistry, a senior capstone course for biochemistry majors, was first offered in 2011. The course objectives focused on students’ ability to access and use primary literature. Despite engaging conversation and excellent student presentations, evaluations of the course content were lower than what this instructor usually receives (3.65/5 compared to 4.3/5 from the previous semester. However, the evaluation of just the instructor was equivalent to historical results.  In an effort to improve the course, a challenge-based learning (CBL design was implemented in 2013 to frame the course around four big questions relevant to our world and local community. This change was made to test if a CBL course design would increase student engagement in the course and therefore their achievement of learning outcomes. Collected data show an improvement in students’ perception of the course. Most significantly, course evaluation results increased when compared to the previous year (4.5/5 as compared to 3.65/5 in 2011. Students also rated the CBL approach as highly effective in achieving core course outcomes and related skills (all queried outcomes averaged 4.2/5 at midterm.

  20. Measuring method for the object pose based on monocular vision technology

    Science.gov (United States)

    Sun, Changku; Zhang, Zimiao; Wang, Peng

    2010-11-01

    Position and orientation estimation of the object, which can be widely applied in the fields as robot navigation, surgery, electro-optic aiming system, etc, has an important value. The monocular vision positioning algorithm which is based on the point characteristics is studied and new measurement method is proposed in this paper. First, calculate the approximate coordinates of the five reference points which can be used as the initial value of iteration in the camera coordinate system according to weakp3p; Second, get the exact coordinates of the reference points in the camera coordinate system through iterative calculation with the constraints relationship of the reference points; Finally, get the position and orientation of the object. So the measurement model of monocular vision is constructed. In order to verify the accuracy of measurement model, a plane target using infrared LED as reference points is designed to finish the verification of the measurement method and the corresponding image processing algorithm is studied. And then The monocular vision experimental system is established. Experimental results show that the translational positioning accuracy reaches +/-0.05mm and rotary positioning accuracy reaches +/-0.2o .

  1. A new image fusion technology based on object extraction and NSCT

    Science.gov (United States)

    Xing, Suxia; Liu, Peng

    In this effort, we proposed an new image fusion technique, utilizing Renyi entropy's object extraction and Non-Subsampled Contourlet Transform (NSCT), for improved visible effect of the image. NSCT is a multiscale transform method, it is a shift-invariant, linear phase, ``true" two-dimensional transform that can decomposes an image into any directional sub-images to capture the intrinsic geometrical structure. In this paper we decompose visible image into 21, 22, and 23 directional sub-images at three different level respectively. Image enhancement is performed at the decomposition level and fused. Renyi entropy is a generalized information entropy. Infrared image can be divided into two parts of the object and the background through the maximum value of Renyi entropy. Image fusion is performed after NSCT and Renyi entropy. The fused image has significantly improved brightness and higher contrast than other images. In order to evaluate the proposed method, information entropy (IE), standard deviation (STD), spatial frequency (SF) and mutual information (MI) are adopted to compare with Laplace, wavelet, and NSCT et al. Results are shown that all evaluation value of the proposed method is higher than that of other methods, and it is a better image fusion method.

  2. Children's exposure to alcohol marketing within supermarkets: An objective analysis using GPS technology and wearable cameras.

    Science.gov (United States)

    Chambers, T; Pearson, A L; Stanley, J; Smith, M; Barr, M; Ni Mhurchu, C; Signal, L

    2017-07-01

    Exposure to alcohol marketing within alcohol retailers has been associated with higher rates of childhood drinking, brand recognition, and marketing recall. This study aimed to objectively measure children's everyday exposure to alcohol marketing within supermarkets. Children aged 11-13 (n = 167) each wore a wearable camera and GPS device for four consecutive days. Micro-spatial analyses were used to examine exposures within supermarkets. In alcohol retailing supermarkets (n = 30), children encountered alcohol marketing on 85% of their visits (n = 78). Alcohol marketing was frequently near everyday goods (bread and milk) or entrance/exit. Alcohol sales in supermarkets should be banned in order to protect children from alcohol marketing. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Practical Study on HVAC Control Technology Based on the Learning Function and Optimum Multiple Objective Processes

    Science.gov (United States)

    Ueda, Haruka; Dazai, Ryota; Kaseda, Chosei; Ikaga, Toshiharu; Kato, Akihiro

    Demand among large office buildings for the energy-saving benefits of the HVAC (Heating, Ventilating and Air-Conditioning) System are increasing as more and more people become concerned with global environmental issues. However, immoderate measures taken in the interest of energy conservation may encroach on the thermal comfort and productivity level of office workers. Building management should satisfy both indoor thermal comfort and energy conservation while adapting to the many regulatory, social, climate, and other changes that occur during the lifespan of the building. This paper demonstrates how optimal control of the HVAC system, based on data modeling and the multi-objective optimal method, achieves an efficient equilibrium between thermal comfort and energy conservation.

  4. [Rationalities of knowledge production: on transformations of objects, technologies and information in biomedicine and the life sciences].

    Science.gov (United States)

    Paul, Norbert W

    2009-09-01

    Since decades, scientific change has been interpreted in the light of paradigm shifts and scientific revolutions. The Kuhnian interpretation of scientific change however is now more and more confronted with non-disciplinary thinking in both, science and studies on science. This paper explores how research in biomedicine and the life sciences can be characterized by different rationalities, sometimes converging, sometimes contradictory, all present at the same time with varying ways of influence, impact, and visibility. In general, the rationality of objects is generated by fitting new objects and findings into a new experimental context. The rationality of hypotheses is a move towards the construction of novel explanatory tools and models. This is often inseparable meshing with the third, the technological rationality, in which a technology-driven, self-supporting and sometimes self-referential refinement of methods and technologies comes along with an extension into other fields. During the second and the third phase, the new and emerging fields tend to expand their explanatory reach not only across disciplinary boundaries but also into the social sphere, creating what has been characterized as "exceptionalism" (e.g. genetic exceptionalism or neuro-exceptionalism). Finally, recent biomedicine and life-sciences reach a level in which experimental work becomes more and more data-driven because the technologically constructed experimental systems generate a plethora of findings (data) which at some point start to blur the original hypotheses. For the rationality of information the materiality of research practices becomes secondary and research objects are more and more getting out of sight. Finally, the credibility of science as a practice becomes more and more dependent on consensus about the applicability and relevance of its results. The rationality of interest (and accountability) has become more and more characteristic for a research process which is no longer

  5. Solar thermal technologies benefits assessment: Objectives, methodologies and results for 1981

    Science.gov (United States)

    Gates, W. R.

    1982-07-01

    The economic and social benefits of developing cost competitive solar thermal technologies (STT) were assessed. The analysis was restricted to STT in electric applications for 16 high insolation/high energy price states. Three fuel price scenarios and three 1990 STT system costs were considered, reflecting uncertainty over fuel prices and STT cost projections. After considering the numerous benefits of introducing STT into the energy market, three primary benefits were identified and evaluated: (1) direct energy cost savings were estimated to range from zero to $50 billion; (2) oil imports may be reduced by up to 9 percent, improving national security; and (3) significant environmental benefits can be realized in air basins where electric power plant emissions create substantial air pollution problems. STT research and development was found to be unacceptably risky for private industry in the absence of federal support. The normal risks associated with investments in research and development are accentuated because the OPEC cartel can artificially manipulate oil prices and undercut the growth of alternative energy sources.

  6. Reliability of objects in aerospace technologies and beyond: Holistic risk management approach

    Science.gov (United States)

    Shai, Yair; Ingman, D.; Suhir, E.

    Species” of military aircraft, commercial aircraft and private cars have been chosen in our analysis as illustrations of the fruitfulness of the “ holistic” approach. The obtained data show that both commercial “ species” exhibit similar “ survival dynamics” in compare with those of the military species of aircraft: lifetime distributions were found to be Weibull distributions for all “ species” however for commercial vehicles, the shape parameters were a little higher than 2, and scale parameters were 19.8 years (aircraft) and 21.7 (cars) whereas for military aircraft, the shape parameters were much higher and the mean time to failure much longer. The difference between the lifetime characteristics of the “ species” can be attributed to the differences in the social, operational, economic and safety-and-reliability requirements and constraints. The obtained information can be used to make tentative predictions for the most likely trends in the given field of vehicular technology. The following major conclusions can be drawn from our analysis: 1) The suggested concept based on the use of HLPFs reflects the current state and the general perceptions in the given field of engineering, including aerospace technologies, and allows for all the inherent and induced factors to be taken into account: any type of failures, usage profiles, economic factors, environmental conditions, etc. The concept requires only very general input data for the entire population. There is no need for the less available information about individual articles. 2) Failure modes are not restricted to the physical type of failures and include economic, cultural or social effects. All possible causes, which might lead to making a decision to terminate the use of a particular type

  7. Eye Tracking Research and Technology: Towards Objective Measurement of Data Quality.

    Science.gov (United States)

    Reingold, Eyal M

    2014-03-01

    Two methods for objectively measuring eye tracking data quality are explored. The first method works by tricking the eye tracker to detect an abrupt change in the gaze position of an artificial eye that in actuality does not move. Such a device, referred to as an artificial saccade generator, is shown to be extremely useful for measuring the temporal accuracy and precision of eye tracking systems and for validating the latency to display change in gaze contingent display paradigms. The second method involves an artificial pupil that is mounted on a computer controlled moving platform. This device is designed to be able to provide the eye tracker with motion sequences that closely resemble biological eye movements. The main advantage of using artificial motion for testing eye tracking data quality is the fact that the spatiotemporal signal is fully specified in a manner independent of the eye tracker that is being evaluated and that nearly identical motion sequence can be reproduced multiple times with great precision. The results of the present study demonstrate that the equipment described has the potential to become an important tool in the comprehensive evaluation of data quality.

  8. Object tracking with robotic total stations: Current technologies and improvements based on image data

    Science.gov (United States)

    Ehrhart, Matthias; Lienhart, Werner

    2017-09-01

    The importance of automated prism tracking is increasingly triggered by the rising automation of total station measurements in machine control, monitoring and one-person operation. In this article we summarize and explain the different techniques that are used to coarsely search a prism, to precisely aim at a prism, and to identify whether the correct prism is tracked. Along with the state-of-the-art review, we discuss and experimentally evaluate possible improvements based on the image data of an additional wide-angle camera which is available for many total stations today. In cases in which the total station's fine aiming module loses the prism, the tracked object may still be visible to the wide-angle camera because of its larger field of view. The theodolite angles towards the target can then be derived from its image coordinates which facilitates a fast reacquisition of the prism. In experimental measurements we demonstrate that our image-based approach for the coarse target search is 4 to 10-times faster than conventional approaches.

  9. Improved Technologies for Decontamination of Crated Large Metal Objects LANL Release No: LA-UR-02-0072

    Energy Technology Data Exchange (ETDEWEB)

    McFee, J.; Stallings, E.; Barbour, K.

    2002-02-26

    The Los Alamos Large Scale Demonstration and Deployment Project (LSDDP) in support of the US Department of Energy (DOE) Deactivation and Decommissioning Focus Area (DDFA) is identifying and demonstrating technologies to reduce the cost and risk of management of transuranic element contaminated large metal objects, i.e. gloveboxes. The previously conducted demonstrations supported characterization and ''front end'' aspects of the Los Alamos Decontamination and Volume Reduction System (DVRS) project. The first demonstration was shown to save the DVRS project approximately $200,000 per year and characterization technologies have been estimated to save DVRS a month of DVRS operation per year. In FY01 demonstrations for decontamination technologies, communication systems, and waste data collection systems have provided additional savings equivalent to another $200K per year of operation. The Los Alamos Large Scale demonstration and Deployment Project continues to provide substantial cost savings to the DVRS process in this second round of demonstrations. DVRS cost savings of $400K per year can now be counted, with additional efficiency savings of up to 30% on many tasks.

  10. 面向对象技术的可拓分析%Extension Analysis for Object-oriented Programming Technology

    Institute of Scientific and Technical Information of China (English)

    刘汉龙

    2001-01-01

    This article introduces the extension analysis for theobject-oriented programming technology, discusses the object matter-element's “multi-value",and presents the transformation conditions of the object matter-element and the rules of decomposition and combination.The compatible and non-comaptible problem in computer development is considered by man-machine interface's DVI. At the same time,the concept of “replace prices” is presented.Taking the word processing software for example,extension analysis used in the optimization of object-oriented programming works well.%在计算机面向对象技术中引入可拓分析,探讨了作为对象物元的“多重价值”,提出了这种对象物元的变换条件、对象物元分解和组合的规则,并从人机接口中的DVI来透视计算机发展中“相容与不相容问题”,同时给出了“替代价格”的概念,以字处理软件为例进行分析,说明可拓分析用于面向对象程序设计的优化能产生良好的效果.

  11. DETERMINING THE TEACHERS’ VIEWS ON THE APPLICABILITY OF THE TECHNOLOGY DESIGN OBJECTIVES IN 9th GRADE PHYSICS CURRICULUM

    Directory of Open Access Journals (Sweden)

    Hakan Şevki AYVACI

    2012-03-01

    ., 2006; Boström, 2008; Demircioğlu vd., 2006, 2009. Unlike the other grades, 9th grade physics curriculum is discussed with an understanding of “science-for-all” (MEB, 2007. In the scope of this understanding, all 9th grade students will not have to continue studying science and/or physics education in future. Thus, they will give their attention to understand physical events and relations between physical events and real life. The textbooks are used by teachers and students as a common guidance material. Additionally, the textbooks which are involved in education in the visual tools are every common, and teachers give a great importance to them. Primarily, the textbooks are offered as a source and a guide for teachers. The teachers can follow many educational activities and can control the topic sequences of the curriculum. Also they can find different teaching activities that can be used during course from the text books. Thus, one of the most important elements of a good textbook is that the book should reflect educational program very well. Therefore, it is important that the activities which are related ability and unit objectives in the physics curriculum are mentioned in 9th grade physics textbooks. The main purpose of this study is to determine the teachers’ views on the applicability of the technology design objectives in 9th grade physics curriculum. The study is carried out in the form of a case study. Semi-constructed interviews are used to collect data. The sample group is consisted of ten physics teachers in MNE (Ministry of National Education who teach in 9th grades. Four teachers are women, six are men. The teachers have an experience at least 11 years, at most 37 years. And they are between the ages of 34 and 57. Five of these ten teachers work in Anatolian High Schools, two of them work in Industrial Vocational High Schools, and one of them works in General High Schools, one of them works in Anatolian Technique High Schools and one of them works

  12. Solving Real World Problems with Alternate Reality Gaming: Student Experiences in the Global Village Playground Capstone Course Design

    Science.gov (United States)

    Dondlinger, Mary Jo; McLeod, Julie K.

    2015-01-01

    The Global Village Playground (GVP) was a capstone learning experience designed to address institutional assessment needs while providing an integrated and authentic learning experience for students aimed at fostering complex problem solving, as well as critical and creative thinking. In the GVP, students work on simulated and real-world problems…

  13. Reducing the Boundaries between the Community and the Academy with a Full-Time Service Learning Capstone

    Science.gov (United States)

    Ballard, Andy

    2013-01-01

    The purpose of this paper is to share my experiences as the instructor of a full-time, single semester, service-learning capstone course. In this innovative course students already volunteering in the Students in Free Enterprise (SIFE) organization work in teams to identify community needs and address them using their business skills and knowledge…

  14. Moving from the Classroom to the Workplace: A Service-Learning Case Study of a Media Production Capstone Course

    Science.gov (United States)

    Giese, Mark

    2013-01-01

    This is a case study of how a capstone course, Producing and Directing, evolved into a service-learning course designed to provide graduating students with real-world workplace experience. It will examine issues including course structure, grading issues, course and client logistics, unaddressed skill sets, group work, and work-product quality…

  15. Drug Synthesis and Analysis on a Dime: A Capstone Medicinal Chemistry Experience for the Undergraduate Biochemistry Laboratory

    Science.gov (United States)

    Streu, Craig N.; Reif, Randall D.; Neiles, Kelly Y.; Schech, Amanda J.; Mertz, Pamela S.

    2016-01-01

    Integrative, research-based experiences have shown tremendous potential as effective pedagogical approaches. Pharmaceutical development is an exciting field that draws heavily on organic chemistry and biochemistry techniques. A capstone drug synthesis/analysis laboratory is described where biochemistry students synthesize azo-stilbenoid compounds…

  16. Students' Perceptions of Communications Provided by Faculty and Peer Leaders, Course Motivation, and Final Project Innovativeness in Capstone Courses

    Science.gov (United States)

    Evert, Amanda Faith

    2011-01-01

    Scope and Method of Study. The purpose of this study was to assess students' perceptions of communications provided by faculty and peer leaders in relationship to both students' perceptions of their course motivation as well as their perceptions of the innovativeness of their final project in single and multidisciplinary capstone courses. The…

  17. Raising the Bar: Challenging Students in a Capstone Project Course with an Android and Mobile Web Parallel Development Team Project

    Science.gov (United States)

    Wong, Wilson; Pepe, James; Englander, Irv

    Information systems capstone projects aim to prepare students for what they will encounter in the industry after graduation. Corporate application development is often a complex endeavor that requires coordination between related products. For example, software development in the mobile application sector may require a coordinated parallel…

  18. A Capstone Project: Closing the Achievement Gap of English Language Learners at Sunshine Elementary School Using the Gap Analysis Model

    Science.gov (United States)

    Mingo-Long, Enyetta

    2013-01-01

    This project was an alternative capstone dissertation conducted by a team of three doctoral students. The project focused on systematic and long-term underachievement of the English Language Learner (ELL) population of a single school, Sunshine Elementary, using the gap analysis model (Clark and Estes, 2008). More specifically, the purpose of the…

  19. Policy-Focused Service-Learning as a Capstone: Teaching Essentials of Baccalaureate Nursing Education.

    Science.gov (United States)

    O'Neill, Moira

    2016-10-01

    The advancing accountability of nurses and nurse educators requires students to develop knowledge, skills, and judgment on a continuum of focus from individual patients to the broader context of care. A dynamic capstone policy course was developed by applying the American Association of Colleges of Nursing's Essentials of Baccalaureate Education for Professional Nursing Practice and capitalizing on related benefits of service-learning pedagogy. It shifts the approach from an intangible didactic lecture on policy and institutional structures to hands-on experiences in actual policy environment and patient health intersections. Acting as nurse consultants, students help clients address a system-based problem. Reflective assignments reinforce student learning as they take cumulative inventory of baccalaureate accomplishments. Competencies in professionalism, teamwork and collaboration, communication, problem solving, and quality assurance are assessed. Students have engaged at sophisticated levels of practice and advocacy. Situating capstone service-learning in a nursing policy course appears to sensitize students to perspectives of all ecological levels and desensitizes their discomfort in the policy arena. Implications for research include identifying and implementing measures of success in program outcomes. [J Nurs Educ. 2016;55(10):583-586.]. Copyright 2016, SLACK Incorporated.

  20. Exciting Senior Capstone Projects Solving US Air Force Challenges

    Science.gov (United States)

    2014-10-02

    Carolina University and they designed, built, and successfully demonstrated a battery powered motorized climbing hoist at the competition held in...Dayton, OH. The second team was composed of six students from the Purdue University School of Engineering Technology and they designed a bridging...which required the heavy life device capable of up to 55,000 lbs. During the course of the three years, teams of students succeeded in demonstrating a

  1. SUSTAINABILITY LOGISTICS BASING SCIENCE AND TECHNOLOGY OBJECTIVE DEMONSTRATION; 50, 300, 1000 PERSON BASE CAMP, ANALYSIS OF FY12 OPERATIONALLY RELEVANT TECHNICAL BASELINE

    Science.gov (United States)

    2017-04-10

    BASING – SCIENCE AND TECHNOLOGY OBJECTIVE – DEMONSTRATION; 50, 300, 1000-PERSON BASE CAMP, ANALYSIS OF FY12 OPERATIONALLY RELEVANT TECHNICAL...REPORT TYPE Final 3. DATES COVERED (From - To) January 2012 – November 2016 4. TITLE AND SUBTITLE SUSTAINABILITY LOGISTICS BASING – SCIENCE AND...Natick Soldier Research, Development and Engineering Center’s Sustainability/Logistics-Basing - Science and Technology Objective – Demonstration to

  2. Integrated Spreadsheets as a Paradigm of Type II Technology Applications in Mathematics Teacher Education

    Science.gov (United States)

    Abramovich, Sergei

    2016-01-01

    The paper presents the use of spreadsheets integrated with digital tools capable of symbolic computations and graphic constructions in a master's level capstone course for secondary mathematics teachers. Such use of spreadsheets is congruent with the Type II technology applications framework aimed at the development of conceptual knowledge in the…

  3. Science and Technology Issues Relating to Data Quality in C2 Systems

    Science.gov (United States)

    2011-06-01

    University, Center for Technology and National Security Policy: Fort Lesley J. McNair, Washington, DC, 20319. 28. MacPherson, M., Roberts Ridge : A Story of...Army. 34. Allen, M.D., C. Macheret, and M.A. Malloy , C2 Core and UCore Message Design Capstone: Interoperable Message Structure. 2009. 35. Guthrie

  4. Object-Based Teaching and Learning for a Critical Assessment of Digital Technologies in Arts and Cultural Heritage

    Science.gov (United States)

    Hess, M.; Garside, D.; Nelson, T.; Robson, S.; Weyrich, T.

    2017-08-01

    As cultural sector practice becomes increasingly dependent on digital technologies for the production, display, and dissemination of art and material heritage, it is important that those working in the sector understand the basic scientific principles underpinning these technologies and the social, political and economic implications of exploiting them. The understanding of issues in cultural heritage preservation and digital heritage begins in the education of the future stakeholders and the innovative integration of technologies into the curriculum. This paper gives an example of digital technology skills embedded into a module in the interdisciplinary UCL Bachelor of Arts and Sciences, named "Technologies in Arts and Cultural Heritage", at University College London.

  5. Case Studies in Application of System Engineering Practices to Capstone Projects

    Science.gov (United States)

    Murphy, Gloria; vanSusante, Paul; Carmen, Christina; Morris, Tommy; Schmidt, Peter; Zalewski, Janusz

    2011-01-01

    The Exploration Systems Mission Directorate (ESMD) of the National Aeronautics and Space Administration (NASA) sponsors a faculty fellowship program that engages researchers with interests aligned with current ESMD development programs. The faculty-members are committed to run a capstone senior design project based- on the materials and experience gained during the fellowship. For the 2010 - 2011 academic year, 5 projects were approved. These projects are in the areas of mechanical and electrical hardware design and optimization, fault prediction and extra planetary civil site preparation. This work summarizes the projects, describes the student teams performing the work, and comments on the integration of Systems Engineering principles into the projects, as well as the affected course curriculums.

  6. Dose assessment for inhalation intakes in complex, energetic environments: experience from the US Capstone study.

    Science.gov (United States)

    Guilmette, Raymond A; Parkhurst, Mary Ann

    2007-01-01

    Because of the lack of existing information needed to evaluate the risks from inhalation exposures to depleted uranium (DU) aerosols of US soldiers during the 1991 Persian Gulf War, the US Department of Defense funded an experimental study to measure the characteristics of DU aerosols created when Abrams tanks and Bradley fighting vehicles are struck with large-caliber DU penetrators, and a dose and risk assessment for individuals present in such vehicles. This paper describes some of the difficulties experienced in dose assessment modelling of the very complex DU aerosols created in the Capstone studies, e.g. high concentrations, heterogeneous aerosol properties, non-lognormal particle size distributions, triphasic in vitro dissolution and rapid time-varying functions of both DU air concentration and particle size. The approaches used to solve these problems along with example results are presented.

  7. iOS--Worthy of the Hype as Assistive Technology for Visual Impairments? A Phenomenological Study of iOS Device Use by Individuals with Visual Impairments

    Science.gov (United States)

    Scott, Shari

    2013-01-01

    This qualitative study sought to explore the shared essence of the lived experiences of early adopters of iOS devices as assistive technology by persons with visual impairments. The capstone question addressed the idea of whether any one device could fully meet the assistive technology needs of this population. Purposeful sampling methods were…

  8. Modifying the Sleep Treatment Education Program for Students to include technology use (STEPS-TECH): Intervention effects on objective and subjective sleep outcomes.

    Science.gov (United States)

    Barber, Larissa K; Cucalon, Maria S

    2017-02-03

    University students often have sleep issues that arise from poor sleep hygiene practices and technology use patterns. Yet, technology-related behaviors are often neglected in sleep hygiene education. This study examined whether the Sleep Treatment Education Program for Students-modified to include information regarding managing technology use (STEPS-TECH)-helps improve both subjective and objective sleep outcomes among university students. Results of an experimental study among 78 university students showed improvements in objective indicators of sleep quantity (total sleep time) and sleep quality (less awakenings) during the subsequent week for students in the STEPS-TECH intervention group compared to a control group. Exploratory analyses indicated that effects were driven by improvements in weekend days immediately following the intervention. There were also no intervention effects on subjective sleep quality or quantity outcomes. In terms of self-reported behavioral responses to educational content in the intervention, there were no group differences in sleep hygiene practices or technology use before bedtime. However, the intervention group reported less technology use during sleep periods than the control group. These preliminary findings suggest that STEPS-TECH may be a useful educational tool to help improve objective sleep and reduce technology use during sleep periods among university students. Copyright © 2017 John Wiley & Sons, Ltd.

  9. US Army Research Laboratory (ARL) Robotics Collaborative Technology Alliance 2014 Capstone Experiment

    Science.gov (United States)

    2016-07-01

    successful on second attempt Hotel 2 7 3 63 8 12.5 Robot scraped along wall for one flight of stairs due to poor positioning (operator error ), behavior...activities. Four capabilities were evaluated as part of distinct Integrated Research Assessments (IRA): Human Robot Interaction Modalities, Semantic...Method 7 4.1.3 Navigation Method 9 4.2 IRA: Search and Observe Doorways 11 4.2.1 Search 12 4.2.2 Observe 12 4.3 IRA: Human Robot Interaction

  10. Micro Autonomous Systems and Technology (MAST) 2016 Annual Report forProgram Capstone

    Science.gov (United States)

    2017-07-18

    Biol. [5] S. Jay , E. S. Vrba, S. Paleobiology, N. Winter, S. J. Gould , and E. S. Vrba, “Exaptation-A Missing Term in the Science of Form...Professor Sarabandi was recognized by the IEEE GRSS with its 2013 Education Award. In 2016 he received the Stephen S. Attwood Award from the College of...Networked Systems, pages 311–316, Santa Barbara, CA, Sept. 2012. [4] Stephen Boyd and Lieven Vandenberghe. Convex optimization. Cam- bridge university

  11. The Role of Authentic Objects in Museums of the History of Science and Technology: Findings from a Visitor Study

    Science.gov (United States)

    Hampp, Constanze; Schwan, Stephan

    2015-01-01

    One characteristic of science centers and science museums is that they communicate scientific findings by presenting real scientific objects. In particular, science museums focus on the historical context of scientific discoveries by displaying authentic objects, defined as original objects that once served a science-related, real-world purpose…

  12. Intervention in engineering students’ final year capstone research projects to enhance their written, oral and presentation skills

    Directory of Open Access Journals (Sweden)

    Aaron Blicblau

    2012-07-01

    Full Text Available This article describes an intervention and enhancement approach to improvement in capstone student’s written, oral and presentation skills as part of their final year research project requirements especially for international students, whose first language is not English. Training in these skills have been incorporated into the early stages of the final year research (capstone project, as an intervention and enhancement program, incorporating a series of intensive seminars and practical applications to provide the students with these capabilities.  In this paper, we report on the research question “how does an intensive intervention and enhancement program in an engineering capstone research project effect students’ perceptions and their capabilities in communicating their research findings.” Results of student responses showed statistically significant differences between perceptions of local and international students in categories of intervention and enhancement in a tutorial environment for writing, oral communication and presentations. International students perceived the intervention and enhancement process of greater benefit to their engineering future than local students did. Overall, the results from this work are relevant to both international and local students who may be lacking in specialised reporting and English skills.

  13. Localization of Objects Using the Ms Windows Kinect 3D Optical Device with Utilization of the Depth Image Technology

    OpenAIRE

    Ján VACHÁLEK; Marian GÉCI; Oliver ROVNÝ; Tomáš VOLENSKÝ

    2015-01-01

    The paper deals with the problem of object recognition for the needs of mobile robotic systems (MRS). The emphasis was placed on the segmentation of an in-depth image and noise filtration. MS Kinect was used to evaluate the potential of object location taking advantage of the indepth image. This tool, being an affordable alternative to expensive devices based on 3D laser scanning, was deployed in series of experiments focused on object location in its field of vision. In our ca...

  14. Localization of Objects Using the Ms Windows Kinect 3D Optical Device with Utilization of the Depth Image Technology

    Directory of Open Access Journals (Sweden)

    Ján VACHÁLEK

    2015-11-01

    Full Text Available The paper deals with the problem of object recognition for the needs of mobile robotic systems (MRS. The emphasis was placed on the segmentation of an in-depth image and noise filtration. MS Kinect was used to evaluate the potential of object location taking advantage of the indepth image. This tool, being an affordable alternative to expensive devices based on 3D laser scanning, was deployed in series of experiments focused on object location in its field of vision. In our case, balls with fixed diameter were used as objects for 3D location.

  15. The Delphi Technique in Identifying Learning Objectives for the Development of Science, Technology and Society Modules for Palestinian Ninth Grade Science Curriculum

    Science.gov (United States)

    Abualrob, Marwan M. A.; Daniel, Esther Gnanamalar Sarojini

    2013-01-01

    This article outlines how learning objectives based upon science, technology and society (STS) elements for Palestinian ninth grade science textbooks were identified, which was part of a bigger study to establish an STS foundation in the ninth grade science curriculum in Palestine. First, an initial list of STS elements was determined. Second,…

  16. CaPOW! Using Problem Sets in a Capstone Course to Improve Fourth-Year Medical Students' Confidence in Self-Directed Learning.

    Science.gov (United States)

    Clay, Alison S; Ming, David Y; Knudsen, Nancy W; Engle, Deborah L; Grochowski, Colleen O'Connor; Andolsek, Kathryn M; Chudgar, Saumil M

    2017-03-01

    Despite the importance of self-directed learning (SDL) in the field of medicine, individuals are rarely taught how to perform SDL or receive feedback on it. Trainee skill in SDL is limited by difficulties with self-assessment and goal setting. Ninety-two graduating fourth-year medical students from Duke University School of Medicine completed an individualized learning plan (ILP) for a transition-to-residency Capstone course in spring 2015 to help foster their skills in SDL. Students completed the ILP after receiving a personalized report from a designated faculty coach detailing strengths and weaknesses on specific topics (e.g., pulmonary medicine) and clinical skills (e.g., generating a differential diagnosis). These were determined by their performance on 12 Capstone Problem Sets of the Week (CaPOWs) compared with their peers. Students used transitional-year milestones to self-assess their confidence in SDL. SDL was successfully implemented in a Capstone course through the development of required clinically oriented problem sets. Coaches provided guided feedback on students' performance to help them identify knowledge deficits. Students' self-assessment of their confidence in SDL increased following course completion. However, students often chose Capstone didactic sessions according to factors other than their CaPOW performance, including perceived relevance to planned specialty and session timing. Future Capstone curriculum changes may further enhance SDL skills of graduating students. Students will receive increased formative feedback on their CaPOW performance and be incentivized to attend sessions in areas of personal weakness.

  17. Autonomous Trans-Antartic expeditions: an initiative for advancing planetary mobility system technology while addressing Earth science objectives in Antartica

    Science.gov (United States)

    Carsey, F.; Schenker, P.; Blamont, J.

    2001-01-01

    A workshop on Antartic Autonomous Scientific Vehicles and Traverses met at the National Geographic Society in February to discuss scientific objectives and benefits of the use of rovers such as are being developed for use in planetary exploration.

  18. The Role of Technology for Achieving Climate Policy Objectives: Overview of the EMF 27 Study on Technology Strategies and Climate Policy Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Kriegler, Elmar; Weyant, John; Blanford, Geoffrey J.; Krey, Volker; Clarke, Leon E.; Edmonds, James A.; Fawcett, Allen A.; Luderer, Gunnar; Riahi, Keywan; Richels, Richard G.; Rose, Steven; Tavoni, Massimo; Van Vuuren, Detlef

    2014-04-01

    This article presents the synthesis of results from the Stanford Energy Modeling Forum Study 27, an inter-comparison of 19 energy-economy and integrated assessment models. The study investigated the value of individual mitigation technologies such as energy intensity improvements, carbon capture and sequestration (CCS), nuclear power, solar and wind power and bioenergy for climate mitigation. Achieving atmospheric greenhouse gas concentration targets at 450 and 550 ppm CO2 equivalent requires massive greenhouse gas emissions reductions. A fragmented policy approach at the level of current ambition is inconsistent with these targets. The availability of a negative emissions technology, in most models biofuels with CCS, proved to be a key element for achieving the climate targets. Robust characteristics of the transformation of the energy system are increased energy intensity improvements and the electrification of energy end use coupled with a fast decarbonization of the electricity sector. Non-electric energy end use is hardest to decarbonize, particularly in the transport sector. Technology is a key element of climate mitigation. Versatile technologies such as CCS and bioenergy have largest value, due in part to their combined ability to produce negative emissions. The individual value of low-carbon power technologies is more limited due to the many alternatives in the sector. The scale of the energy transformation is larger for the 450 ppm than for the 550 ppm CO2e target. As a result, the achievability and the costs of the 450 ppm target are more sensitive to variations in technology variability. Mitigation costs roughly double when moving from 550 ppm to 450 ppm CO2e, but remain below 3% of GDP for most models.

  19. Embodied subjects and fragmented objects: Women's bodies, assisted reproduction technologies and the right to self-determination.

    NARCIS (Netherlands)

    Gupta, J.A.

    2008-01-01

    This article focuses on the transformation of the female reproductive body with the use of assisted reproduction technologies under neo-liberal economic globalisation, wherein the ideology of trade without borders is central, as well as under liberal feminist ideals, wherein the right to self-determ

  20. An analysis of the transition of the Objective Individual Combat Weapon (OICW) from advanced technology demonstration to acquisition program

    OpenAIRE

    Webb, Erik C.

    2002-01-01

    Approved for public release, distribution is unlimited The OICW is envisioned to be a lightweight, shoulder-fired weapon having a dual munitions capability and an advanced day/night fire control. The OICW is expected to provide substantial improvements in lethality over the predecessor rifle and carbine families of weapons. The Office of the Program Manager for Small Arms assessed the OICW Advanced Technology Demonstration process and program progress in 1998 and concluded the ATD process ...

  1. Knowledge retention in capstone experiences: An analysis of online and face-to-face courses

    Directory of Open Access Journals (Sweden)

    John P. Girard

    2016-12-01

    Full Text Available This research chronicles the development of a capstone experience by a regional comprehensive university. The process began with a multi-year project during which the faculty annually reviewed the results with a view to determining if the class provided the deep learning culminating experiences anticipated. A major measure of success was the desire to replicate the deep learning common in face-to-face classes in the online environment. The results of 166 students were analyzed, 82 online and 84 face-to-face, to determine if a difference existed. A one-way ANOVA tested the score differences among 10 sections and determined the students’ scores did not differ significantly. Finally, a two-sample t-test between proportions determined that there was not a significant difference between the online and face-to-face students with respect to the level of assessment scores earned. Given that online and face-to-face students demonstrate the same level of knowledge, does this beg the question, what value does face-to-face class time offer?

  2. Fundamentals of Object Databases Object-Oriented and Object-Relational Design

    CERN Document Server

    Dietrich, Suzanne

    2010-01-01

    Object-oriented databases were originally developed as an alternative to relational database technology for the representation, storage, and access of non-traditional data forms that were increasingly found in advanced applications of database technology. After much debate regarding object-oriented versus relational database technology, object-oriented extensions were eventually incorporated into relational technology to create object-relational databases. Both object-oriented databases and object-relational databases, collectively known as object databases, provide inherent support for object

  3. HST/STIS results on circumstellar disks and jets, future coronography and technology for IR multi-object spectroscopy

    Science.gov (United States)

    Woodgate, Bruce E.

    2002-01-01

    Results of studies of circumstellar disks and jets obtained by HST/STIS visible coronagraphy and UV spectroscopy, and by ground-based Fabry-Perot coronagraphy will be presented. Future improvements in coronagraphy will be discussed. The development of microshutter arrays as programmable multi-object selectors for the NGST near IR spectrograph will be described.

  4. INFORMATION DECISION SUPPORT OF REGION MANAGEMENT ON THE BASIS OF INTEGRATION TECHNOLOGY OF POTENTIALLY DANGEROUS OBJECTS THREE-DIMENSIONAL MODELS WITH GEOGRAPHIC INFORMATION SYSTEM OF THE EXECUTIVE AGENCIES

    Directory of Open Access Journals (Sweden)

    Pavlov, S.V.

    2016-12-01

    Full Text Available The article discusses the technology integration of three-dimensional models of potentially dangerous objects in geoinformation system of executive agencies (on the Republic Bashkortostan example. As one of the approaches to its solution offered on the basis of the integration of service-oriented approach, which introduced the set-theoretic description of the spatial information as part of three-dimensional models. The proposed technology provides for the integration of both the data and the level and the service level. The integration of three-dimensional models of potentially dangerous objects in geoinformation system of executive agencies will reduce the time and increase the accuracy of the decisions taken in the event of an emergency at the expense of the full amount of the required information about its development in a more visual and understandable form by means of a single system.

  5. Student participation and interactivity using asynchronous computer-mediated communication for resolution of an undergraduate capstone management case study.

    Science.gov (United States)

    Miller, Paulette J

    2012-01-01

    Online discussion activities are designed for computer-mediated learning activities in face-to-face, hybrid, and totally online courses. The use of asynchronous computer-mediated communication (A-CMC) coupled with authentic workplace case studies provides students in the protected learning environment with opportunities to practice workplace decision making and communication. In this study, communication behaviors of transmitter and receiver were analyzed to determine participation and interactivity in communication among small-group participants in a health information management capstone management course.

  6. Using multi-attribute utility theory to select an information technology (IT infrastructure for learning object repositories (LOR

    Directory of Open Access Journals (Sweden)

    Guilherme Bizarro Salve

    2014-07-01

    Full Text Available The purpose of this article is to apply the methodology to structure the decision problem and select an appropriate LOR architecture. This reflected in the need to invest and improve the technology for educational organizations. Selecting an appropriate infrastructure for LOR is usually a complex decision, because it has conflicting attributes. In situations of uncertainty, multi-attribute utility theory (MAUT assists in selecting the best alternative according to criteria established by the decision maker. Results demonstrated that the choice of indexing and distributing LOR (A4 is less sensitive to changes and has greater utility. According to the analysis, A4 is the option most suitable for deploying IT infrastructure in the case of application. Researchers and professional managers can assess the types of ROA architecture and replicate this decision model to find similar results.

  7. Terahertz meets sculptural and architectural art: Evaluation and conservation of stone objects with T-ray technology.

    Science.gov (United States)

    Krügener, K; Schwerdtfeger, M; Busch, S F; Soltani, A; Castro-Camus, E; Koch, M; Viöl, W

    2015-10-07

    Conservation of cultural heritage is an area where novel scientific techniques are having enormous impact. Given the value and uniqueness of art pieces, non-invasive diagnostic methods are highly appreciated by conservators. Terahertz radiation has shown enormous potential as non-contact probe that can be used for the three-dimensional reconstruction of internal structure of stone-made objects. In this article we report the evaluation of the internal damage state of two art pieces, a medallion from the Castle of Celle and a window sill from the St. Peter of Trier Cathedral. We also used terahertz radiation to follow and assess the restoration process of the window sill. We found that terahertz spectroscopy is an excellent non-destructive evaluation method for stone artwork that shows enormous potential as a tool for conservation.

  8. Terahertz meets sculptural and architectural art: Evaluation and conservation of stone objects with T-ray technology

    Science.gov (United States)

    Krügener, K.; Schwerdtfeger, M.; Busch, S. F.; Soltani, A.; Castro-Camus, E.; Koch, M.; Viöl, W.

    2015-10-01

    Conservation of cultural heritage is an area where novel scientific techniques are having enormous impact. Given the value and uniqueness of art pieces, non-invasive diagnostic methods are highly appreciated by conservators. Terahertz radiation has shown enormous potential as non-contact probe that can be used for the three-dimensional reconstruction of internal structure of stone-made objects. In this article we report the evaluation of the internal damage state of two art pieces, a medallion from the Castle of Celle and a window sill from the St. Peter of Trier Cathedral. We also used terahertz radiation to follow and assess the restoration process of the window sill. We found that terahertz spectroscopy is an excellent non-destructive evaluation method for stone artwork that shows enormous potential as a tool for conservation.

  9. 基于ObjectARX的宗海界址图快速自动化绘制技术%Fast-Automatic Technology for Drawing Parcel Sea Boundary Map Base on ObjectARX

    Institute of Scientific and Technical Information of China (English)

    孙玉超; 曾纪胜

    2014-01-01

    宗海图精确记载宗海位置、界址点、界址线及与相邻宗海关系,是申明海域使用权属的重要依据,宗海图包括宗海位置图和宗海界址图。目前,大部分宗海界址图都是通过AutoCAD结合ArcGIS等多个软件绘制,绘制步骤比较繁琐。该文提出了基于ObjectARX的宗海界址图快速自动化绘制技术,基于该技术开发出的宗海界址图快速成图系统可以减少宗海界址图的绘制步骤,实现了在单一AutoCAD环境下宗海界址图的快速自动化绘制。%Parcel sea map record parcels the sea location,sea boundary points,sea boundary line and the relationship with the adjacentsea accurately, which is the important basis for stating the sea using right.Parcel sea map includes the parcel sea location map and parcel sea boundary map.Currently,the parcel sea boundary map is drawed by AutoCAD combine with ArcGIS and other softwares,but there are complicated steps by mixed using these softwares .This paper proposed the Fast-automatic technology for drawing parcel sea boundary map base on ObjectARX, the parcel sea boundary map fast mapping system which developed by the above-mentioned technology reduced the steps of drawing parcel sea boundary map, and realized the Fast-automatic parcel sea boundary map drawing use only AutoCAD.

  10. The molecular biology capstone assessment: a concept assessment for upper-division molecular biology students.

    Science.gov (United States)

    Couch, Brian A; Wood, William B; Knight, Jennifer K

    2015-03-02

    Measuring students' conceptual understandings has become increasingly important to biology faculty members involved in evaluating and improving departmental programs. We developed the Molecular Biology Capstone Assessment (MBCA) to gauge comprehension of fundamental concepts in molecular and cell biology and the ability to apply these concepts in novel scenarios. Targeted at graduating students, the MBCA consists of 18 multiple-true/false (T/F) questions. Each question consists of a narrative stem followed by four T/F statements, which allows a more detailed assessment of student understanding than the traditional multiple-choice format. Questions were iteratively developed with extensive faculty and student feedback, including validation through faculty reviews and response validation through student interviews. The final assessment was taken online by 504 students in upper-division courses at seven institutions. Data from this administration indicate that the MBCA has acceptable levels of internal reliability (α=0.80) and test-retest stability (r=0.93). Students achieved a wide range of scores with a 67% overall average. Performance results suggest that students have an incomplete understanding of many molecular biology concepts and continue to hold incorrect conceptions previously documented among introductory-level students. By pinpointing areas of conceptual difficulty, the MBCA can provide faculty members with guidance for improving undergraduate biology programs. © 2015 B. A. Couch et al. CBE—Life Sciences Education © 2015 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

  11. Brownfield site investigation: a new technology for the detection of large objects based on passive seismic monitoring

    Science.gov (United States)

    Pytharouli, S.; Aspray, T. J.; Grojean, Q.; Steirou, E.

    2013-12-01

    In assessing brownfield sites for redevelopment, intrusive investigations are carried out to assess contamination, geology and hydrogeology. Such investigations are expensive, requiring the hire of expensive equipment, which incur standing charges when not in use. In addition, they provide information for discrete sample ';windows'. Non-intrusive methods have the ability to gather information across an entire area. Methods including electrical resistivity/conductivity and ground penetrating radar (GRP), and have been applied to brownfield sites. Their ability in detecting pollution e.g. buried canisters, is often restricted due to unfavourable on-site conditions e.g. GRP is not useful in cases where a layer of clay or reinforced concrete is present. This study is focused on the use, for the first time, of short period seismometers as an alternative, non-intrusive, passive seismic method to detect the presence of objects buried under the ground surface even when on-site conditions are not favourable. We used five low detection threshold seismometers with a flat response within the frequency range 1 - 80 Hz. We conducted experiments both in the lab and in the field. Three series of lab experiments were conducted in sand, under controlled conditions, using ambient noise as the only source of generating seismic waves. Results revealed that there is a distinct difference in the amplitude of the power density spectra of the recorded signals in cases where objects e.g. concrete block, polystyrene block, wood, were present. To validate these results in field scale, we conducted a series of experiments that took place in Heriot-Watt University campus on a field for which we had information for the subsurface from an electromagnetic survey. We used the same monitoring equipment to try and detect the presence of a 6m long PVC pipe buried 0.5m below the ground surface. Results were consistent with those obtained from lab experiments. This supports our initial hypothesis on the

  12. Assessing computerized eye tracking technology for gaining insight into expert interpretation of the 12-lead electrocardiogram: an objective quantitative approach.

    Science.gov (United States)

    Bond, R R; Zhu, T; Finlay, D D; Drew, B; Kligfield, P D; Guldenring, D; Breen, C; Gallagher, A G; Daly, M J; Clifford, G D

    2014-01-01

    It is well known that accurate interpretation of the 12-lead electrocardiogram (ECG) requires a high degree of skill. There is also a moderate degree of variability among those who interpret the ECG. While this is the case, there are no best practice guidelines for the actual ECG interpretation process. Hence, this study adopts computerized eye tracking technology to investigate whether eye-gaze can be used to gain a deeper insight into how expert annotators interpret the ECG. Annotators were recruited in San Jose, California at the 2013 International Society of Computerised Electrocardiology (ISCE). Each annotator was recruited to interpret a number of 12-lead ECGs (N=12) while their eye gaze was recorded using a Tobii X60 eye tracker. The device is based on corneal reflection and is non-intrusive. With a sampling rate of 60Hz, eye gaze coordinates were acquired every 16.7ms. Fixations were determined using a predefined computerized classification algorithm, which was then used to generate heat maps of where the annotators looked. The ECGs used in this study form four groups (3=ST elevation myocardial infarction [STEMI], 3=hypertrophy, 3=arrhythmias and 3=exhibiting unique artefacts). There was also an equal distribution of difficulty levels (3=easy to interpret, 3=average and 3=difficult). ECGs were displayed using the 4x3+1 display format and computerized annotations were concealed. Precisely 252 expert ECG interpretations (21 annotators×12 ECGs) were recorded. Average duration for ECG interpretation was 58s (SD=23). Fleiss' generalized kappa coefficient (Pa=0.56) indicated a moderate inter-rater reliability among the annotators. There was a 79% inter-rater agreement for STEMI cases, 71% agreement for arrhythmia cases, 65% for the lead misplacement and dextrocardia cases and only 37% agreement for the hypertrophy cases. In analyzing the total fixation duration, it was found that on average annotators study lead V1 the most (4.29s), followed by leads V2 (3.83s

  13. Service-Learning by Doing: How a Student-Run Consulting Company Finds Relevance and Purpose in a Business Strategy Capstone Course

    Science.gov (United States)

    Robinson, David F.; Sherwood, Arthur Lloyd; DePaolo, Concetta A.

    2010-01-01

    A challenge for undergraduate learning in strategy is that the students lack professional work experiences. Without a rich background of experience, many strategic management topics are difficult to grasp. Our solution has been to develop a strategic management capstone course that combines service-learning and problem-based learning. The…

  14. A Systems Analysis and Design Case Study for a Business Modeling Learning Experience for a Capstone CIS/IS Systems Development Class

    Science.gov (United States)

    Russell, Jack; Russell, Barbara

    2015-01-01

    The goal is to provide a robust and challenging problem statement for a capstone, advanced systems analysis and design course for CIS/MIS/CS majors. In addition to the problem narrative, a representative solution for much of the business modeling deliverables is presented using the UML paradigm. A structured analysis deliverable will be the topic…

  15. Positive Effects of Restricting Student Note-Taking in a Capstone Psychology Course: Reducing the Demands of Divided Attention in the Classroom

    Science.gov (United States)

    Long, Gerald M.

    2014-01-01

    Two versions of a senior-level capstone course with differing note-taking strategies were compared. In one semester, a traditional student note-taking format was used; in another semester, student note-taking was rendered unnecessary by providing students with complete instructor notes. Student performance in the course as well as student opinions…

  16. A Capstone Wiki Knowledge Base: A Case Study of an Online Tool Designed to Promote Life-Long Learning through Engineering Literature Research

    Science.gov (United States)

    Clarke, James B.; Coyle, James R.

    2011-01-01

    This article reports the results of a case study in which an experimental wiki knowledge base was designed, developed, and tested by the Brill Science Library at Miami University for an undergraduate engineering senior capstone project. The wiki knowledge base was created to determine if the science library could enhance the engineering literature…

  17. Service-Learning by Doing: How a Student-Run Consulting Company Finds Relevance and Purpose in a Business Strategy Capstone Course

    Science.gov (United States)

    Robinson, David F.; Sherwood, Arthur Lloyd; DePaolo, Concetta A.

    2010-01-01

    A challenge for undergraduate learning in strategy is that the students lack professional work experiences. Without a rich background of experience, many strategic management topics are difficult to grasp. Our solution has been to develop a strategic management capstone course that combines service-learning and problem-based learning. The…

  18. A Capstone Project Using the Gap Analysis Model: Closing the College Readiness Gap for Latino English Language Learners with a Focus on College Affordability and Student Grades

    Science.gov (United States)

    Kurland, Michael A. T.

    2013-01-01

    This capstone dissertation inquiry project focused on the underperformance of English language learners (ELLs) at a high school. The Clark and Estes' (2008) gap analysis model was the analytical framework used to conduct this inquiry. At the request of the school, the inquiry focus was on gaining a better understanding of the underachievement…

  19. Production of biologically inert Teflon thin layers on the surface of allergenic metal objects by pulsed laser deposition technology

    Science.gov (United States)

    Hopp, B.; Smausz, T.; Kresz, N.; Nagy, P. M.; Juhász, A.; Ignácz, F.; Márton, Z.

    Allergic-type diseases are current nowadays, and they are frequently caused by certain metals. We demonstrated that the metal objects can be covered by Teflon protective thin layers using a pulsed laser deposition procedure. An ArF excimer laser beam was focused onto the surface of pressed PTFE powder pellets; the applied fluences were 7.5-7.7 J/cm2. Teflon films were deposited on fourteen-carat gold, silver and titanium plates. The number of ablating pulses was 10000. Post-annealing of the films was carried out in atmospheric air at oven temperatures between 320 and 500 °C. The thickness of the thin layers was around 5 μm. The prepared films were granular without heat treatment or after annealing at a temperature below 340 °C. At 360 °C a crystalline, contiguous, smooth, very compact and pinhole-free thin layer was produced; a melted and re-solidified morphology was observed above 420 °C. The adhesion strength between the Teflon films and the metal substrates was determined. This could exceed 1-4 MPa depending on the treatment temperature. It was proved that the prepared Teflon layers can be suitable for prevention of contact between the human body and allergen metals and so for avoidance of metal allergy.

  20. Assessment of the quality and applicability of an e-portfolio capstone assessment item within a bachelor of midwifery program.

    Science.gov (United States)

    Baird, Kathleen; Gamble, Jenny; Sidebotham, Mary

    2016-09-01

    Education programs leading to professional licencing need to ensure assessments throughout the program are constructively aligned and mapped to the specific professional expectations. Within the final year of an undergraduate degree, a student is required to transform and prepare for professional practice. Establishing assessment items that are authentic and able to reflect this transformation is a challenge for universities. This paper both describes the considerations around the design of a capstone assessment and evaluates, from an academics perspective, the quality and applicability of an e-portfolio as a capstone assessment item for undergraduate courses leading to a professional qualification. The e-portfolio was seen to meet nine quality indicators for assessment. Academics evaluated the e-portfolio as an authentic assessment item that would engage the students and provide them with a platform for ongoing professional development and lifelong learning. The processes of reflection on strengths, weaknesses, opportunities and threats, comparison of clinical experiences with national statistics, preparation of professional philosophy and development of a curriculum vitae, whilst recognised as comprehensive and challenging were seen as highly valuable to the student transforming into the profession.

  1. EXPERIENCE IN APPLICATION OF THE TECHNOLOGIES OF BUILDING INFORMATION MODELING WHEN CONSTRUCTING THE OLYMPIC OBJECTS OF SOCHI-2014 AND STADIUMS OF THE FIFA WORLD CUP 2018

    Directory of Open Access Journals (Sweden)

    Shakhraman'yan Andrey Mikhaylovich

    2016-06-01

    Full Text Available The authors describe the experience in application of information modeling technologies for buildings and structures on the example of design and construction of the objects SOCHI-2014 and stadiums of FIFA World Cup 2017. According to the regulatory documents in 2014 in Sochi the automated monitoring systems of the strain state of bearing structures and engineering systems were in-stalled in all the Olympic ice stadiums and in the Central Olympic Stadium. The systems were controlled by software package SODIS Building. The main possibilities of SODIS Building are enumerated in the article.

  2. THE EVALUATION OF OBJECTIVES AND ACTIVITIES IN THE PRIMARY EDUCATION 5TH GRADE SCIENCE AND TECHNOLOGY CURRICULUM IN TERMS OF MULTIPLE INTELLIGENCE THEORY

    Directory of Open Access Journals (Sweden)

    Oğuz GÜRBÜZTÜRK

    2013-06-01

    Full Text Available The purpose of this study is to know the teachers’ opinions in terms of multiple intelligence theory about the objectives and activities in the units of “Earth, Sun and Moon” and the “Electricity in Our Life” in the primary education 5th grade science and technology curriculum. The survey model was used in this study. The population of this study consists of 262 5th grade teachers working in the center of Malatya. The sample consists of 190 5th grade teachers who were selected randomly. Questionnaire was used to collect data that are consisted of 70 items. Teachers are asked to select one dominant intelligence type for 65 objectives and activities. To analyze the data, the background information of teachers like seniority, graduated faculty, whether or not they had in-service education were compared to teachers opinions about which intelligence area is suitable with these objectives and activities and these comparison information was given and commented with frequencies, percentages and cross tabs. Given the results of this study, about evaluating the objectives and activities in these units, taking all activities in the teaching-learning process into consideration, it is discovered that, teachers generally focus on visual, spatial, logical and mathematical intelligence areas and they think in the same way regardless of their seniority, graduated faculty, and whether or not they had in-service education about teaching-learning theories and models. Some advices are given based on the results of this study.

  3. Object oriented methods

    CERN Document Server

    Graham, Ian

    1994-01-01

    This book is a revision of Ian Graham's successful survey of the whole area of object technology. It covers object- oriented programming, object-oriented design, object- oriented analysis, object-oriented databases and treats several related technologies. New to this edition are more applications of object-oriented methods and more coverage of object-oriented database products available. Graham has also doubled the design and analysis material that examines over 60 different approaches - making this the most comprehensive book on the market. Also new is the foreword by Grady Booch.

  4. Object and Objective Lost?

    DEFF Research Database (Denmark)

    Lopdrup-Hjorth, Thomas

    2015-01-01

    This paper explores the erosion and problematization of ‘the organization’ as a demarcated entity. Utilizing Foucault's reflections on ‘state-phobia’ as a source of inspiration, I show how an organization-phobia has gained a hold within Organization Theory (OT). By attending to the history...... of this organization-phobia, the paper argues that OT has become increasingly incapable of speaking about its core object. I show how organizations went from being conceptualized as entities of major importance to becoming theoretically deconstructed and associated with all kinds of ills. Through this history......, organizations as distinct entities have been rendered so problematic that they have gradually come to be removed from the center of OT. The costs of this have been rather significant. Besides undermining the grounds that gave OT intellectual credibility and legitimacy to begin with, the organization-phobia...

  5. What drives the gender gap in STEM? The SAGA Science, Technology and Innovation Gender Objectives List (STI GOL) as a new approach to linking indicators to STI policies

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, E.; Schaaper, M.; Bello, A.

    2016-07-01

    There is a large imbalance in the participation of women in Science, Technology, Engineering and Mathematics (STEM) fields across all of Latin American countries despite the fact that the region has one of the highest proportions of female researchers worldwide (44% according to UIS statistics). Female researchers face persisting institutional and cultural barriers, which limit the development of their careers and constrains their access to decision-making positions. In this framework, UNESCO has launched the STEM and Gender Advancement (SAGA) project, which has for objective to address the gender gap in STEM fields in all countries at all levels of education and research as well as to promote women’s participation in science. SAGA is a global UNESCO project with the support of the Swedish Government through the Swedish International Development Cooperation Agency (Sida). One of the outcomes of this project is the SAGA Science, Technology and Innovation Gender Objectives List (STI GOL), which is an innovative tool that aids in the identification of gaps in the policy mix. Additionally, the STI GOL configures the conceptual backbone of the SAGA project, by linking gender equality STI policy instruments with indicators. By using the STI GOL, and identifying the gender gaps, policy-makers will be able to implement evidence-based policies in STEM fields. The SAGA STI GOL is a new and innovative way of contributing to the development of effective gender sensitive policies in STI fields, both in education and in the workplace. Likewise, it enables the categorization of STI policies and instruments, with the objective of identifying gaps in the policy mix and aid in the creation and design of evidence-based public policies to promote gender equality. (Author)

  6. A dessubjetivação do trabalho: o homem como objeto da tecnologia Unsubjectivation of work: men as technology object

    Directory of Open Access Journals (Sweden)

    André Guimarães Augusto

    2009-08-01

    Full Text Available Este trabalho visa a apresentar uma reflexão crítica sobre a tecnologia a partir da obra de Marx. A tecnologia é compreendida como forma de organização do processo de trabalho sob as relações de produção capitalista. O processo de trabalho capitalista é apreendido como um duplo processo de objetivação e dessubjetivação do trabalho, sendo este último resultado da aplicação ao processo de produção das ciências que tem o homem como objeto.The purpose of this paper is to present a critical account of technology on the grounds of Marx's work. Technology is understood as a form of organization of work process under capitalist production relations. Capitalist work process is understood as a dual process of objectivation and unsubjectivation of work. Unsubjectivation of work is the result of application in work process of sciences that have man in its many dimensions as object.

  7. Using business plan development as a capstone project for MPH programs in Canada: validation through the student perspective.

    Science.gov (United States)

    Papadopoulos, Andrew; Britten, Nicole; Hatcher, Meghan; Rainville, Keira

    2013-10-01

    Master of Public Health (MPH) programs have been developed across Canada as a response to the need for adequately trained individuals to work in the public health sector. Educational institutions that deliver MPH programs have a responsibility to ensure that graduates of their program have the essential knowledge, skills and attitudes to begin a successful career in public health. The Public Health Agency of Canada has created the core competencies for public health to guide the development, delivery and evaluation of MPH programs. In Canada, a capstone project is the recommended method of evaluating the MPH graduate's ability to demonstrate proficiency in the public health core competencies. A business plan that develops the framework for a public health program is an ideal capstone project currently used in practice within the University of Guelph MPH program. This group assignment incorporates all 36 of the public health core competencies while providing students with a real-world public health experience, and should be considered for inclusion within MPH programs across Canada. Business planning provides students the opportunity to engage in practice-based learning, applying theoretical knowledge to practice. Further, the ability to develop realistic but financially feasible public health problems is an invaluable skill for MPH graduates. As the development of programs becomes more restricted and the continuation of other programs are under constant threat, the ability to develop a sound business plan is a required skill for individuals entering the public health sector, and will ensure students are able to maximize outcomes given tight fiscal budgets and limited resources.

  8. Keeping up with video game technology: objective analysis of Xbox Kinect™ and PlayStation 3 Move™ for use in burn rehabilitation.

    Science.gov (United States)

    Parry, Ingrid; Carbullido, Clarissa; Kawada, Jason; Bagley, Anita; Sen, Soman; Greenhalgh, David; Palmieri, Tina

    2014-08-01

    Commercially available interactive video games are commonly used in rehabilitation to aide in physical recovery from a variety of conditions and injuries, including burns. Most video games were not originally designed for rehabilitation purposes and although some games have shown therapeutic potential in burn rehabilitation, the physical demands of more recently released video games, such as Microsoft Xbox Kinect™ (Kinect) and Sony PlayStation 3 Move™ (PS Move), have not been objectively evaluated. Video game technology is constantly evolving and demonstrating different immersive qualities and interactive demands that may or may not have therapeutic potential for patients recovering from burns. This study analyzed the upper extremity motion demands of Kinect and PS Move using three-dimensional motion analysis to determine their applicability in burn rehabilitation. Thirty normal children played each video game while real-time movement of their upper extremities was measured to determine maximal excursion and amount of elevation time. Maximal shoulder flexion, shoulder abduction and elbow flexion range of motion were significantly greater while playing Kinect than the PS Move (p≤0.01). Elevation time of the arms above 120° was also significantly longer with Kinect (pgames show therapeutic potential in burn rehabilitation. Objectively quantifying the physical demands of video games commonly used in rehabilitation aides clinicians in the integration of them into practice and lays the framework for further research on their efficacy.

  9. The Use of Mock NSF-type Grant Proposals and Blind Peer Review as the Capstone Assignment in Upper-Level Neurobiology and Cell Biology Courses.

    Science.gov (United States)

    Itagaki, Haruhiko

    2013-01-01

    Although the use of grant proposals and blind peer review are standard in the natural sciences, their use as a pedagogical tool is rarely mentioned in the literature. As a consequence of dissatisfaction with term papers and literature reviews as the capstone writing experience in 300-level undergraduate biology courses, I have been experimenting with mock NSF-type grant proposals followed by blind peer review as the major assignment in my junior/senior-level classes. The improvement in educational outcomes and competencies due to this assignment appears to be substantial and worth the additional effort on both the students' and instructor's parts. Here, I outline the mechanics of this assignment and its advantages and disadvantages as well as the type of curriculum that is required to support this type of capstone assignment.

  10. Assessing a Methodological Proposal for the Design, Creation and Evaluation of Learning Objects Oriented to Educators with Diverse Educational and Technological Competencies

    Directory of Open Access Journals (Sweden)

    Jorge J. Maldonado

    2016-04-01

    Full Text Available This paper describes a methodological proposal for the design, creation and evaluation of Learning Objects (LOs. This study arises from the compilation and analysis of several LO design methodologies currently used in Ibero-America. This proposal, which has been named DICREVOA, defines five different phases: analysis, design (instructional and multimedia, implementation (LO and metadata, evaluation (from the perspective of both the producer and the consumer of the LO, and publishing. The methodology focuses not only on the teaching inexperienced, but also on those having a basic understanding of the technological and educational aspects related to LO design; therefore, the study emphasizes LO design activities centered around the Kolb cycle and the use of the ExeLearning tool in order to implement the LO core. Additionally, DICREVOA was used in a case study, which demonstrates how it provides a feasible mechanism for LO design and implementation withindifferent contexts. Finally, DICREVOA, the case study to which it was applied, and the results obtained are presented.

  11. Development of technology for washed minced fish production from low-profit objects of fishing in the Volga-Caspian Basin

    Directory of Open Access Journals (Sweden)

    Mukatova M. D.

    2016-09-01

    Full Text Available The objects of the study are as follows: rudd and goldfish, samples of food minced made of them without washing, after single and double washings. To study the organoleptic and physico-chemical parameters the conventional methods of the fishing industry have been used. At the LLC "Astrakhan fisheries" two experimental batches of minced rudd and goldfish with double washing by water using a food additive "Omfresh plus" have been made in the amount of 1.0 % by weight of the meat. The yield of washed minced food from rudd is 41.4 %, from silver carp – 41.0 %. Some decrease in water content, water-holding capacity and formalin-titratable nitrogen in minced fish after each washing step has been established. Studying the organoleptic characteristics has shown that the frozen minced briquettes are cuboids, have clean surface with the presence of minor irregularities, colour – light gray, dense texture. On physical and chemical parameters the food washed mince correspond to GOST R 55505–2013 "Frozen food fish forcemeat. Specifications". Water content is 79–82 %, sodium chloride – 0,17–0,35 %, and water-holding capacity – at over 50 %. The proven technology of manufacturing washed minced from goldfish and rudd can be put into production for the purpose of deep processing of unprofitable species of the Volga-Caspian Basin and getting washed minced food and culinary products based on it.

  12. Objetos subordinantes: la tecnología epistémica para producir centros y periferias Subordinating objects: epistemic technology to produce centers and peripheries

    Directory of Open Access Journals (Sweden)

    Leandro Rodriguez Medina

    2013-03-01

    Full Text Available En los estudios sociales de la ciencia y la tecnología ha aparecido abundante literatura acerca de la importancia del espacio en la producción y la circulación de conocimiento. La propia idea de circulación de conocimiento ha recibido mayor atención, especialmente por la necesidad de analizar las transformaciones que éste recibe a medida que viaja de su lugar de origen a sus múltiples destinos. El presente artículo, derivado de investigaciones cualitativas y documentales sobre trayectorias académicas e influencia teórica, introduce el concepto de "objeto subordinante" para comprender la apropiación en campos periféricos de conocimiento producido en los centros metropolitanos.In social studies on science and technology, abundant literature has emerged on the importance of space in the production and the circulation of knowledge. The very idea of the circulation of knowledge has received more attention, particularly because of the need to analyze the transformations it undergoes as it travels from its place of origin to its multiple destinations. This article, derived from qualitative research and the analysis of documents on academic trajectories and theoretical influence, introduces the concept of the "subordinating object" to understand how knowledge produced in metropolitan centers is appropriated in peripheral fields.

  13. Commercializing Defense Technologies and Helping Defense Firms Succeed in Commercial Markets: A Report on the Objectives, Activities, and Accomplishments of the TAP-IN Program

    Science.gov (United States)

    1997-01-01

    Technology Access for Product Innovation (TAP-IN), the largest technology deployment project funded by TRP, was competitively selected through a national solicitation for proposals. TAP-IN was created to help companies access and apply defense technologies and help defense-dependent companies enter new commercial markets. Defense technologies included technologies developed by DoD, DOE, NASA, and their contractors. TAP-IN was structured to provide region-based technology access services that were able to draw on technology resources nationwide. TAP-IN provided expert assistance in all stages of the commercialization process from concept through prototype design to capital sourcing and marketing strategy. TAP-IN helped companies locate new technology, identify business partners, secure financing, develop ideas for new products, identify new markets, license technology, solve technical problems, and develop company-specific applications of federal technology. TAP-IN leveraged NASA's existing commercial technology network to create an integrated national network of organizations that assisted companies in every state. In addition to NASA's six regional technology transfer centers (RTTCs), TAP-IN included business and technology development organizations in every state, the Industrial Designers Society of America, and the Federal Laboratory Consortium (FLC).

  14. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  15. Common Object Library Description

    Science.gov (United States)

    2012-08-01

    Information Modeling ( BIM ) technology to be successful, it must be consistently applied across many projects, by many teams. The National Building Information ...distribution is unlimited. 13. SUPPLEMENTARY NOTES 14. ABSTRACT For Building Information Modeling ( BIM ) technology to be successful, it must be... BIM standards and for future research projects. 15. SUBJECT TERMS building information modeling ( BIM ), object

  16. Information technology and innovative drainage management practices for selenium load reduction from irrigated agriculture to provide stakeholder assurances and meet contaminant mass loading policy objectives

    Energy Technology Data Exchange (ETDEWEB)

    Quinn, N.W.T.

    2009-10-15

    Many perceive the implementation of environmental regulatory policy, especially concerning non-point source pollution from irrigated agriculture, as being less efficient in the United States than in many other countries. This is partly a result of the stakeholder involvement process but is also a reflection of the inability to make effective use of Environmental Decision Support Systems (EDSS) to facilitate technical information exchange with stakeholders and to provide a forum for innovative ideas for controlling non-point source pollutant loading. This paper describes one of the success stories where a standardized Environmental Protection Agency (EPA) methodology was modified to better suit regulation of a trace element in agricultural subsurface drainage and information technology was developed to help guide stakeholders, provide assurances to the public and encourage innovation while improving compliance with State water quality objectives. The geographic focus of the paper is the western San Joaquin Valley where, in 1985, evapoconcentration of selenium in agricultural subsurface drainage water, diverted into large ponds within a federal wildlife refuge, caused teratogenecity in waterfowl embryos and in other sensitive wildlife species. The fallout from this environmental disaster was a concerted attempt by State and Federal water agencies to regulate non-point source loads of the trace element selenium. The complexity of selenium hydrogeochemistry, the difficulty and expense of selenium concentration monitoring and political discord between agricultural and environmental interests created challenges to the regulation process. Innovative policy and institutional constructs, supported by environmental monitoring and the web-based data management and dissemination systems, provided essential decision support, created opportunities for adaptive management and ultimately contributed to project success. The paper provides a retrospective on the contentious planning

  17. Object crowding.

    Science.gov (United States)

    Wallace, Julian M; Tjan, Bosco S

    2011-05-25

    Crowding occurs when stimuli in the peripheral fields become harder to identify when flanked by other items. This phenomenon has been demonstrated extensively with simple patterns (e.g., Gabors and letters). Here, we characterize crowding for everyday objects. We presented three-item arrays of objects and letters, arranged radially and tangentially in the lower visual field. Observers identified the central target, and we measured contrast energy thresholds as a function of target-to-flanker spacing. Object crowding was similar to letter crowding in spatial extent but was much weaker. The average elevation in threshold contrast energy was in the order of 1 log unit for objects as compared to 2 log units for letters and silhouette objects. Furthermore, we examined whether the exterior and interior features of an object are differentially affected by crowding. We used a circular aperture to present or exclude the object interior. Critical spacings for these aperture and "donut" objects were similar to those of intact objects. Taken together, these findings suggest that crowding between letters and objects are essentially due to the same mechanism, which affects equally the interior and exterior features of an object. However, for objects defined with varying shades of gray, it is much easier to overcome crowding by increasing contrast.

  18. Performance Objectives

    Science.gov (United States)

    1978-12-01

    objectives may direct students’ learning (Duchastel and Merrill, 1973; Kapfer , 1970; Kibler et al., 1974), since such objectives may provide...matter learning. Journal of Educational Psychology, 62(1): 67-70 (1971). Kapfer , P. G. Behavioral objectives and the curriculum processor. Educational

  19. Okeanos Explorer (EX1504L4): Campaign to Address Pacific monument Science, Technology, and Ocean NEeds (CAPSTONE) Leg IV

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The ship will conduct 24 hour operations consisting of daytime ROV dives and evening/nighttime mapping operations including during transit. During this cruise we...

  20. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  1. The Benefits of Peer Review and a Multisemester Capstone Writing Series on Inquiry and Analysis Skills in an Undergraduate Thesis.

    Science.gov (United States)

    Weaver, K F; Morales, V; Nelson, M; Weaver, P F; Toledo, A; Godde, K

    2016-01-01

    This study examines the relationship between the introduction of a four-course writing-intensive capstone series and improvement in inquiry and analysis skills of biology senior undergraduates. To measure the impact of the multicourse write-to-learn and peer-review pedagogy on student performance, we used a modified Valid Assessment of Learning in Undergraduate Education rubric for Inquiry and Analysis and Written Communication to score senior research theses from 2006 to 2008 (pretreatment) and 2009 to 2013 (intervention). A Fisher-Freeman-Halton test and a two-sample Student's t test were used to evaluate individual rubric dimensions and composite rubric scores, respectively, and a randomized complete block design analysis of variance was carried out on composite scores to examine the impact of the intervention across ethnicity, legacy (e.g., first-generation status), and research laboratory. The results show an increase in student performance in rubric scoring categories most closely associated with science literacy and critical-thinking skills, in addition to gains in students' writing abilities.

  2. Agile Objects

    Science.gov (United States)

    German, Senta; Harris, Jim

    2017-01-01

    In this article, the authors argue that the art-historical canon, however it is construed, has little relevance to the selection of objects for museum-based teaching. Their contention is that all objects are fundamentally agile and capable of interrogation from any number of disciplinary standpoints, and that the canon of museum education,…

  3. A CityGML extension for traffic-sign objects that guides the automatic processing of data collected using Mobile Mapping technology

    Science.gov (United States)

    Varela-González, M.; Riveiro, B.; Arias-Sánchez, P.; González-Jorge, H.; Martínez-Sánchez, J.

    2014-11-01

    The rapid evolution of integral schemes, accounting for geometric and semantic data, has been importantly motivated by the advances in the last decade in mobile laser scanning technology; automation in data processing has also recently influenced the expansion of the new model concepts. This paper reviews some important issues involved in the new paradigms of city 3D modelling: an interoperable schema for city 3D modelling (cityGML) and mobile mapping technology to provide the features that composing the city model. This paper focuses in traffic signs, discussing their characterization using cityGML in order to ease the implementation of LiDAR technology in road management software, as well as analysing some limitations of the current technology in the labour of automatic detection and classification.

  4. 基于面向对象技术的空间数据库设计和实现%Design and implementation of spatial database based on object oriented technology

    Institute of Scientific and Technical Information of China (English)

    朱贤坤; 刘学

    2015-01-01

    With therapid development of computer technology,database technology has entered the third generation object-oriented database,and based on the design and implementation of object oriented database is a hot research in it software now.The to design and implementation of database as the foundation,then analysis was applied to the main features of the object-oriented database technology and research its application mode in the database,is discussed based on oriented object technology of database development trend.%随着计算机技术的快速发展,数据库技术已经步入了第三代面向对象的数据库,而基于面向对象的数据库设计与实现是现在IT软件研究的一个热点。本文将以数据库的设计与实现为基础,继而分析应用于数据库的面向对象技术的主要特点,并研究其在数据库中的应用方式,讨论基于面向对象技术的数据库的发展趋势。

  5. Trusted Objects

    Energy Technology Data Exchange (ETDEWEB)

    CAMPBELL,PHILIP L.; PIERSON,LYNDON G.; WITZKE,EDWARD L.

    1999-10-27

    In the world of computers a trusted object is a collection of possibly-sensitive data and programs that can be allowed to reside and execute on a computer, even on an adversary's machine. Beyond the scope of one computer we believe that network-based agents in high-consequence and highly reliable applications will depend on this approach, and that the basis for such objects is what we call ''faithful execution.''

  6. Object theatre

    DEFF Research Database (Denmark)

    Ryöppy, Merja; Heiberg, Andreas

    2015-01-01

    possibilities to emerge. We present a study in which the Object Theatre approach is applied to redesign socially shared everyday products that are located in public places. This project demonstrates how Object Theatre offers a broad perspective form which to explore and present product interactions....... In particular, it emphasises the understanding of a product by relating and changing perspectives, and takes into account context of use and diverse social settings....

  7. Fashion Objects

    DEFF Research Database (Denmark)

    Andersen, Bjørn Schiermer

    2009-01-01

    This article attempts to create a framework for understanding modern fashion phenomena on the basis of Durkheim's sociology of religion. It focuses on Durkheim's conception of the relation between the cult and the sacred object, on his notion of 'exteriorisation', and on his theory of the social...... symbol in an attempt to describe the peculiar attraction of the fashion object and its social constitution. However, Durkheim's notions of cult and ritual must undergo profound changes if they are to be used in an analysis of fashion. The article tries to expand the Durkheimian cult, radically enlarging...... it without totally dispersing it; depicting it as held together exclusively by the sheer 'force' of the sacred object. Firstly, the article introduces the themes and problems surrounding Durkheim's conception of the sacred. Next, it briefly sketches an outline of fashion phenomena in Durkheimian categories...

  8. Teachers, Traditions, and Transformation: Keynote Address Delivered at the 9th Annual Master's Capstone Conference for the Urban Teacher Master's and Certification Program at the University of Pennsylvania on 29 April 2014

    Science.gov (United States)

    Smith, John F., III

    2015-01-01

    An alumnus of both Teach For America and the master's program in urban education at the University of Pennsylvania, John F. Smith III delivered the following address on April 29, 2014, to teachers in the 2013 and 2014 cohorts of Teach For America in Philadelphia. Program organizers invited him to provide remarks during the capstone event and to…

  9. Fostering Systems Engineering Education Through Interdisciplinary Programs and Graduate Capstone Projects

    Science.gov (United States)

    2011-06-01

    Technology, Engineering and Math (STEM) workforce. This problem goes beyond the needs of the core acquisition workforce that comprise only 40% of the...the higher levels of Bloom’s taxonomy. In the case of research based programs, students are evaluating and creating new methods and tools associated...AE students did not get involved in the concept definition or architecture development effort because they were unfamiliar with the methods and

  10. Extraction and Analysis of Mega Cities’ Impervious Surface on Pixel-based and Object-oriented Support Vector Machine Classification Technology: A case of Bombay

    Science.gov (United States)

    Yu, S. S.; Sun, Z. C.; Sun, L.; Wu, M. F.

    2017-02-01

    The object of this paper is to study the impervious surface extraction method using remote sensing imagery and monitor the spatiotemporal changing patterns of mega cities. Megacity Bombay was selected as the interesting area. Firstly, the pixel-based and object-oriented support vector machine (SVM) classification methods were used to acquire the land use/land cover (LULC) products of Bombay in 2010. Consequently, the overall accuracy (OA) and overall Kappa (OK) of the pixel-based method were 94.97% and 0.96 with a running time of 78 minutes, the OA and OK of the object-oriented method were 93.72% and 0.94 with a running time of only 17s. Additionally, OA and OK of the object-oriented method after a post-classification were improved up to 95.8% and 0.94. Then, the dynamic impervious surfaces of Bombay in the period 1973-2015 were extracted and the urbanization pattern of Bombay was analysed. Results told that both the two SVM classification methods could accomplish the impervious surface extraction, but the object-oriented method should be a better choice. Urbanization of Bombay experienced a fast extending during the past 42 years, implying a dramatically urban sprawl of mega cities in the developing countries along the One Belt and One Road (OBOR).

  11. Objective becoming

    CERN Document Server

    Skow, Bradford

    2015-01-01

    Bradford Skow presents an original defense of the 'block universe' theory of time, often said to be a theory according to which time does not pass. Along the way, he provides in-depth discussions of alternative theories of time, including those in which there is 'robust passage' of time or 'objective becoming': presentism, the moving spotlight theory of time, the growing block theory of time, and the 'branching time' theory of time. Skow explains why the moving spotlight theory is the best of these arguments, and rebuts several popular arguments against the thesis that time passes. He surveys the problems that the special theory of relativity has been thought to raise for objective becoming, and suggests ways in which fans of objective becoming may reconcile their view with relativistic physics. The last third of the book aims to clarify and evaluate the argument that we should believe that time passes because, somehow, the passage of time is given to us in experience. He isolates three separate arguments thi...

  12. Design and implementation of object-oriented technology-based business management system%基于面向对象技术的工商管理系统的设计与实现

    Institute of Scientific and Technical Information of China (English)

    邹金妮

    2014-01-01

    In this paper,the design of object-oriented technology in business administration system based on a first analysis of the object-oriented technology,and the goal of building the system,needs analysis, the final conceptual model of the system,user permissions,parameter passing, function modules are designed.%本文基于面向对象技术设计了工商管理系统,首先分析了面向对象技术,然后对系统的建设目标、需求进行了分析,最后对系统的概念模型、用户权限、参数传递、功能模块进行了设计。

  13. Surviving Objects

    OpenAIRE

    Murjas, Teresa

    2012-01-01

    Surviving Objects (2012) is a devised multi-media practice-as-research performance based on extensive interviews conducted with my elderly mother and recorded on a hand-held device. Our conversations concern her experiences as a child refugee following violent deportation by the Soviet Army from Eastern Poland to Siberia (1941), and her subsequent route, via Persia, to a British-run refugee camp in Northern Rhodesia, where she remained for 6 years before arriving in the UK. In order to aid my...

  14. Technological and industrial changes induced by the 'Factor 4' objective; Changements technologiques et industriels induits par l'objectif 'Facteur

    Energy Technology Data Exchange (ETDEWEB)

    Vidil, R. [Ecole Nationale Superieure d' Ingenieurs Electriciens de Grenoble (ENSIEG), 38 - Grenoble (France); Bloch, D. [Grenoble-Alpes Metropole, 38 (France); Coussediere, L. [Tenerrdis, 38 - Grenoble (France); Chateau, B. [Enerdata, 38 - Gieres (France); Raux, Ch. [Laboratoire d' Economie des Transports, 69 - Lyon (France); Bonnard, F. [Schneider Electric (France); Barre, B. [Areva, 75 - Paris (France); Hadjsaid, N. [Institut National Polytechnique de Grenoble, IDEA/GIE, 38 - Grenoble (France)

    2007-03-15

    With the seriousness of the climate change threat, the European Union has invited its member states to adopt the goal of dividing by a factor 4 their greenhouse gas emissions before 2050. France has answered this invitation and requested the De Boissieu Commission to make an inventory of the means allowing to reach this goal. A first debate took place at Grenoble on November 16, 2006 about the technological and industrial consequences of such a perspective and about the necessary R and D trends to be implemented (socio-economic impacts, changes in the sectors of transportation, dwellings, space heating, lighting and air-conditioning, role of nuclear and renewable energy sources). The results of these debates are summarized in this newsletter: what is Factor 4; what are the technological, economical and social implications; the achievable changes in the transportation sector; HOMES project: optimized dwellings and buildings for energy mastery and services; role of nuclear energy in the reduction of the fossil fuels share; rise in power of renewable energy sources. (J.S.)

  15. Assessing Program Learning Objectives to Improve Undergraduate Physics Education

    Science.gov (United States)

    Menke, Carrie

    2014-03-01

    Our physics undergraduate program has five program learning objectives (PLOs) focusing on (1) physical principles, (2) mathematical expertise, (3) experimental technique, (4) communication and teamwork, and (5) research proficiency. One PLO is assessed each year, with the results guiding modifications in our curriculum and future assessment practices; we have just completed our first cycle of assessing all PLOs. Our approach strives to maximize the ease and applicability of our assessment practices while maintaining faculty's flexibility in course design and delivery. Objectives are mapped onto our core curriculum with identified coursework collected as direct evidence. We've utilized mostly descriptive rubrics, applying them at the course and program levels as well as sharing them with the students. This has resulted in more efficient assessment that is also applicable to reaccreditation efforts, higher inter-rater reliability than with other rubric types, and higher quality capstone projects. We've also found that the varied quality of student writing can interfere with our assessment of other objectives. This poster outlines our processes, resources, and how we have used PLO assessment to strengthen our undergraduate program.

  16. Objective thermomechanics

    CERN Document Server

    Fülöp, Tamás

    2015-01-01

    An irreversible thermodynamical theory of solids is presented where the kinematic quantities are defined in an automatically objective way. Namely, auxiliary elements like reference frame, reference time and reference configuration are avoided by formulating the motion of the continuum on spacetime directly, utilizing the Weyl-Matolcsi description of spacetime. This restricts the range of definable kinematic quantities heavily. Solids are distinguished from fluids by possessing not only an instantaneous metric tensor but a relaxed metric, too, that represents the natural geometric structure of the solid. The comparison of the instantaneous metric to the relaxed one is the basis of the definition of the elastic state variable, the elastic deformedness tensor. Thermal expansion is conceived as the temperature dependence of the relaxed metric. As opposed to this reversible type of change, plasticity means an irreversible change in the relaxed metric, and is describable via a plastic change rate tensor. The relat...

  17. Analysis of RPL Routing Technology in Smart Objects Networks%浅析智能物件网络中的RPL路由技术

    Institute of Scientific and Technical Information of China (English)

    宋菲; 侯乐青

    2011-01-01

    The connectivity between the routers and nodes in smart objects networks are constrained,therefore,according to the characteristics of smart object networks,the ROLL working group of IETF(Internet Engineering Task Force) drafted a routing program for low-power lossy network(LLN),designing a routing protocol called RPL.This article will be to RPL routing protocol to research,analysis of the comment of protocol,including the design principle,topology structure,the create of routing,etc,in the end this article summarizes the characteristic of RPL routing.%在智能物件网络中路由器以及节点之间的连通性都受到约束,所以根据智能物件网络的特点,IETF(互联网工作任务组)中的ROLL工作组为低功耗有损网络(LLN)制定路由方案,设计了一个叫做RPL的路由协议。本文将对RPL路由协议进行研究,分析其协议内容,包括设计原则、拓扑结构、路由创建等,总结出RPL路由的特点。

  18. Technology and technology transfer: some basic issues

    OpenAIRE

    Shamsavari, Ali; Adikibi, Owen; Taha, Yasser

    2002-01-01

    This paper addresses various issues relating to technology and transfer of technology such as technology and society, technology and science, channels and models of technology transfer, the role of multinational companies in transfer of technology, etc. The ultimate objective is to pose the question of relevance of some existing models and ideas like technological independence in an increasingly globalised world economy.

  19. ATLes: the strategic application of Web-based technology to address learning objectives and enhance classroom discussion in a veterinary pathology course.

    Science.gov (United States)

    Hines, Stephen A; Collins, Peggy L; Quitadamo, Ian J; Brahler, C Jayne; Knudson, Cameron D; Crouch, Gregory J

    2005-01-01

    A case-based program called ATLes (Adaptive Teaching and Learning Environments) was designed for use in a systemic pathology course and implemented over a four-year period. Second-year veterinary students working in small collaborative learning groups used the program prior to their weekly pathology laboratory. The goals of ATLes were to better address specific learning objectives in the course (notably the appreciation of pathophysiology), to solve previously identified problems associated with information overload and information sorting that commonly occur as part of discovery-based processes, and to enhance classroom discussion. The program was also designed to model and allow students to practice the problem-oriented approach to clinical cases, thereby enabling them to study pathology in a relevant clinical context. Features included opportunities for students to obtain additional information on the case by requesting specific laboratory tests and/or diagnostic procedures. However, students were also required to justify their diagnostic plans and to provide mechanistic analyses. The use of ATLes met most of these objectives. Student acceptance was high, and students favorably reviewed the online ''Content Links'' that made useful information more readily accessible and level appropriate. Students came to the lab better prepared to engage in an in-depth and high-quality discussion and were better able to connect clinical problems to underlying changes in tissue (lesions). However, many students indicated that the required time on task prior to lab might have been excessive relative to what they thought they learned. The classroom discussion, although improved, was not elevated to the expected level-most likely reflecting other missing elements of the learning environment, including the existing student culture and the students' current discussion skills. This article briefly discusses the lessons learned from ATLes and how similar case-based exercises might be

  20. Taking a Case Method Capstone Course Online: A Comparative Case Study

    Directory of Open Access Journals (Sweden)

    Grandon Gill

    2015-06-01

    The results of the conversion proved to be consistent with some of our expectations and surprising in other ways. Consistent with expectations, the online tools that we employed allowed us to create an online design that was relatively faithful to the original version in terms of meeting learning objectives. Also consistent with our expectations, student perceptions of the course—while quite positive overall—were more mixed for the online course than for its face-to-face predecessor. The course offering produced two surprises, however. First, the online approach to the project component of the course actually seemed to result in higher quality project presentations than the face-to-face version. Second, when results were compared from the instrument we used to evaluate student learning gains, the classroom and online versions of the class proved to be nearly indistinguishable. Given the very different delivery mechanisms employed, we had anticipated far more differences in student perceptions of what they had learned over the course of the semester. Given the challenges of taking a highly interactive class online, we viewed this surprise to be a very pleasant one.

  1. Recipe and technology development for minced canned products of special purpose based on the underutilized north region fishery object (thorny skate

    Directory of Open Access Journals (Sweden)

    Raibulov S. P.

    2016-09-01

    Full Text Available The paper presents the results of justifying the use of thorny skate in the technology of minced meat canned products of special purpose. The key criterion determined the specialized purpose of canned food is the high content of physiologically functional food ingredient of chondroitin sulfate in the cartilage of thorny skate wings. The high content of chondroitin sulfate in raw materials ensures that the content of the physiologically functional ingredient in the finished canned food will be at the level from 220 to 250 mg per 100 g of product. The method of IR blanching is presented for removing urea from the thorny skate muscle tissue. To confirm the efficiency of the developed method of urea removal, it has been proposed to use a modified photocolorimetric method for determination of mass fractions of urea in feed flour according to the governmental standard GOST R 50032–92 "Feed flour made of fish, marine mammals, crustaceans and invertebrates. Methods of determining the mass fraction of urea and calculation of the crude protein with a given mass fraction of carbamide". With the help of this technique, the efficiency of urea removal from the thorny skate tissue by the proposed method has been determined. The residual urea content in the meat of thorny skate after IR blanching is 0.76 %, which is two times lesser than border value of sensitivity of the person (approximated as 1.2 %. The paper presents the materials of experimental substantiation of optimum formulation of new canned meat based on the method of fuzzy modeling. The ratio of the main components of the meatballs recipe (thorny skate and Atlantic cod close to the optimum is 48 % by weight of meat for each component separately.

  2. Dynamic monitoring land-cover change in Hubei province using object-oriented technology and remote sensing imagery%面向对象的湖北省土地覆被变化遥感快速监测

    Institute of Scientific and Technical Information of China (English)

    罗开盛; 李仁东; 常变蓉; 邱娟

    2013-01-01

    为了快速监测湖北省土地覆被变化,以HJ-CCD、TM以及ETM影像为数据源,探索出了集成面向对象技术与“3S”技术的中尺度土地覆被变化遥感流程和方法。该方法首先基于HJ-CCD影像和面向对象技术进行2010年湖北省土地覆被信息的提取,并用野外采样点对结果进行验证。在保证高精度的情况下利用向量相似性函数对湖北省2000-2005年以及2005-2010年进行变化检测,从而获得2个变化时期影像的变化区域,然后利用面向对象技术中的最邻近分类器对变化区进行自动化分类。最后分别将2期的变化结果与未变化结果融合后获得湖北省2000年、2005年和2010年的土地覆被图,在GIS中处理后建成县、市、省3级行政级别的湖北省土地覆被变化本底数据库。试验表明分类结果的总体精度为93.24%,Kappa系数为0.914;2000-2005年与2005-2010年变化检测的总体精度分别为90.88%和90.75%。同时研究发现景观破碎的地区应用面向对象技术有一定的局限性。%The rapid development of RS、GIS, and GPS technology provide a fast and effective means for the dynamic monitoring of land-cover change detection. Many scholars have researched constructing a land-cover change dynamic database with various remote sensing imageries. In conclusion, the main sources to date are abroad remote sensing imagery, while the Chinese HJ-CCD imageries rarely are used in cover-wetlands information extraction. More important, the traditional pixel-based methods which have been universally applied in land-cover/land-use information extraction for many years cannot meet the application need of land-cover/land-use information extraction because it only uses the spectral features of imagery, ignoring other information that the remote sensing imagery carries. The object-oriented technology not only uses spectral features, but also makes full use of texture features、spatial features

  3. The Object-Oriented Technology (OOT) for Industry Control Configuration Software%面向对象技术在工控组态软件中的应用

    Institute of Scientific and Technical Information of China (English)

    隗云志; 王普; 汪东军

    2001-01-01

    Using Object-Oriented Technology(OOT) to implement the datasampling,recording,maintenance and reappearance function module in industry control system.This article is concerned about the base concept and important characteristic of the Object Oriented Programming (OOP) and presents the material implement in industry control configuration software.%利用面向对象技术,实现工业控制系统中的数据采样、记录、维护和再现功能模块。文中介绍了面向对象理论的基本概念和重要特点,并给出了其在工控组态软件中的具体实现。

  4. Study of image fusion technology based on object extraction and NSCT%基于目标提取与NSCT的图像融合技术研究

    Institute of Scientific and Technical Information of China (English)

    邢素霞; 肖洪兵; 陈天华; 吉林浩

    2013-01-01

    Redundant information can be integrated effectively and visual effect is enhanced through the multi-sensor image fusion techniques. Due to the prominent target and lower background contrast for infrared images, while high resolution but insensitive to hot and concealed targets for visible images,an effective image fusion method,which can highlight the two images without reducing the image resolution, is presented in this paper. Firstly, targets are extracted from the infrared image by Renyi entropy,and the visible image is enhanced adaptively through non-subsample Contourlet transform (NSCT). Then the enhanced visible image is fused with the target infrared image. Finally, two different sets of infrared and visible images are used for image fusion test by different methods. By contrst, the fused image has significantly improve brightness and higher contrast than other images,and has better visual effect. In order to objectively evaluate the proposed method,many evaluations, such as information entropy (IE) , standard deviation (STD), spatial frequency (SF), mutual information (MI) and running time, are adopted to make comparision with other fusion methods. The results show that the IE,STD,SF and MI values of the proposed method, obtained are significantly higher than those of the other methods. The proposed method has longer running time than the Laplace, wavelet transform and Renyi entropy methods, but shorter running time than other methods. So the proposed method is an effective image fusion one.%针对红外图像目标突出、背景对比度差、可见光图像分辨率高以及对热目标不敏感且隐蔽目标无法发现等问题,本文提出了一种能够突出两种图像的优势信息且不降低图像分辨率的图像融合方法.首先采用Renyi熵提取红外目标,并通过非下采样Contourlet变换(NSCT)对可见光图像进行自适应增强;然后将图像增强后的可见光图像与目标图像进行融合,得到融合图像.通过

  5. The Design and Realization of Land Acquisition Information Managemet System Based on SuperMap Objects Components Technology%基于 SuperMap Objects 组件技术的征地资料管理系统的设计与实现

    Institute of Scientific and Technical Information of China (English)

    王海侠

    2014-01-01

    At present most of surveying and mapping units are still given priority to the file management and CASS e -lectronic data management for the land data information management ,however,these artificial managements methods are exposed to low efficiency ,qurveying difficult and high cost of maintenace .In order to improve the land acquisition data in-formation management level and improve the work efficiency and solve the practical prolems in the process of datd quer -ying and analysis ,the paper used Mirosoft Visual Studio .NET as a platform ,desigened its atchitecture by use of three lay-ers atchitecture ,used Objected-Oriented technology , SuperMap Objects COM technology , SuperMap SDX+technology . Combining with practical experience ,the paper realises the development and application of the Land acquisition informa-tion management system of Bengbu by secondary development .%目前大多数测绘单位的征地资料管理仍以文件管理和CASS电子资料管理为主,这些人工管理效率低、查询不方便、维护成本高。为了提高征地资料的信息化管理水平,提高工作效率,解决征地资料查询分析过程中面临的实际问题,本文以Mirosoft Visual Studio .NET为平台,采用了3层架构进行设计,运用了面向对象技术、SuperMap Objects组件技术、Super-Maps SDX+技术等技术方法,结合生产实践经验,通过二次开发,实现了蚌埠市征地资料管理系统的开发与应用。

  6. On Institutionalizing and Reconstructing the Objective of the Legalization of Agricultural Science and Technology%论农业科技法制目标的重构及其制度化

    Institute of Scientific and Technical Information of China (English)

    李亮国

    2014-01-01

    In China,the objective of the legalization of agricultural science and technology is to increase cereal production greatly. It brought some adverse effects. Some agricultural sciences and technologies that are negative to environment were used and the methods of traditional agricultural production were lost. The quality and safety of agricultural products are very low and the environment and resources of agriculture were damaged. Based on the idea of sustainable development, the objective of the legalization of agricultural science and technology should be shifted to the model of"ecology and production coordinated".%我国农业科技立法及政策性文件表明当下我国农业科技法制的目标为“产量确保型”。其对产量的过分强调招致环境负面型农业科技的普遍适用及传统生态型农业生产方式的灭失,以至于农产品尤其是食用农产品质量安全隐患严重,农业环境资源破坏严重等问题。本文基于可持续发展理念下农业的多功能性,提出我国农业科技法制的目标应转向“生态产量协调型”,并在技术控制主义理念指导下使该目标获得制度化。

  7. Bayesian Tracking of Visual Objects

    Science.gov (United States)

    Zheng, Nanning; Xue, Jianru

    Tracking objects in image sequences involves performing motion analysis at the object level, which is becoming an increasingly important technology in a wide range of computer video applications, including video teleconferencing, security and surveillance, video segmentation, and editing. In this chapter, we focus on sequential Bayesian estimation techniques for visual tracking. We first introduce the sequential Bayesian estimation framework, which acts as the theoretic basis for visual tracking. Then, we present approaches to constructing representation models for specific objects.

  8. GIS技术及物联网在城市物联应急平台构建中的应用%Application of GIS technology and IOT in construction of urban objects associated emergency platform

    Institute of Scientific and Technical Information of China (English)

    钱晓军; 范冬萍

    2015-01-01

    In order to analyze and explore the application of GIS technology and Internet of Things(IOT)in construction of the urban objects associated emergency platform,the concepts and characteristics of GIS technology and IOT are analyzed and discussed first in this paper , and then the important role of GIS technology and IOT in urban objects associated emergency management is elaborated and the factors which affect the construction of the emergency platform are discussed. Finally the appli⁃cation of GIS technology and IOT in the emergency platform is investigated. The results show it is significant for the continuous promotion of capacity in emergency warning,intelligent detection and emergency response as well as guarantee of the unban eco⁃nomic development and the security to use the GIS technology and IOT in the field of emergency,and create the urban emergen⁃cy platform. The application of GIS technology and IOT in the emergency platform can achieve the functions of spatial data storage, sharing,acquisition,analysis and mapping,has a positive role to deal with emergencies,and can improve the management and maintenance efficiency of the urban objects associated emergency facilities.%为分析与探讨GIS技术及物联网在城市物联应急平台构建中的应用,研究了GIS技术与物联网的概念及特征,其次阐述GIS技术与物联网在城市物联应急管理中的重要作用,并对影响城市物联应急平台构建的因素进行论述,最后探讨物联网和GIS技术在城市物联应急平台构建中的应用,结果发现,在应急领域中应用GIS技术与物联网,创建城市应急管理平台,对突发事件预警、智能发现及应急处理能力进行不断提升,对确保城市经济发展与安全稳定极具重要意义。GIS与物联网在市物联应急平台构件中的应用,能够实现空间数据的存储、共享、采集、分析和制图等,有效处理应急事件,对于提高城市物联应

  9. SQL3 Object Model and Its Extension

    Institute of Scientific and Technical Information of China (English)

    ZHUANG Ji-feng; PENG Zhi-yong

    2004-01-01

    As the latest version of relational database standard, SQL3 not only has been extended with many new relational features but also added with the object-oriented technologies.This paper introduces the object-oriented features of SQL3 and then extends it with object deputy model to support object view mechanisms.

  10. Testing Object-Oriented Software

    DEFF Research Database (Denmark)

    Caspersen, Michael Edelgaard; Madsen, Ole Lehrmann; Skov, Stefan H.

    The report is a result of an activity within the project Centre for Object Technology (COT), case 2. In case 2 a number of pilot projects have been carried out to test the feasibility of using object technology within embedded software. Some of the pilot projects have resulted in proto-types that......The report is a result of an activity within the project Centre for Object Technology (COT), case 2. In case 2 a number of pilot projects have been carried out to test the feasibility of using object technology within embedded software. Some of the pilot projects have resulted in proto......-types that are currently being developed into production versions. To assure a high quality in the product it was decided to carry out an activ-ity regarding issues in testing OO software. The purpose of this report is to discuss the issues of testing object-oriented software. It is often claimed that testing of OO...... software is radically different form testing traditional software developed using imperative/procedural programming. Other authors claim that there is no difference. In this report we will attempt to give an answer to these questions (or at least initiate a discussion)....

  11. Sound objects – Auditory objects – Musical objects

    DEFF Research Database (Denmark)

    Hjortkjær, Jens

    2015-01-01

    The auditory system transforms patterns of sound energy into perceptual objects but the precise definition of an ‘auditory object’ is much debated. In the context of music listening, Pierre Schaeffer argued that ‘sound objects’ are the fundamental perceptual units in ‘musical objects......’. In this paper, I review recent neurocognitive research suggesting that the auditory system is sensitive to structural information about real-world objects. Instead of focusing solely on perceptual sound features as determinants of auditory objects, I propose that real-world object properties are inherent...

  12. Sound objects – Auditory objects – Musical objects

    DEFF Research Database (Denmark)

    Hjortkjær, Jens

    2016-01-01

    The auditory system transforms patterns of sound energy into perceptual objects but the precise definition of an ‘auditory object’ is much debated. In the context of music listening, Pierre Schaeffer argued that ‘sound objects’ are the fundamental perceptual units in ‘musical objects......’. In this paper, I review recent neurocognitive research suggesting that the auditory system is sensitive to structural information about real-world objects. Instead of focusing solely on perceptual sound features as determinants of auditory objects, I propose that real-world object properties are inherent...

  13. Quasi-objects, Cult Objects and Fashion Objects

    DEFF Research Database (Denmark)

    Andersen, Bjørn Schiermer

    2011-01-01

    This article attempts to rehabilitate the concept of fetishism and to contribute to the debate on the social role of objects as well as to fashion theory. Extrapolating from Michel Serres’ theory of the quasi-objects, I distinguish two phenomenologies possessing almost opposite characteristics....... These two phenomenologies are, so I argue, essential to quasi-object theory, yet largely ignored by Serres’ sociological interpreters. They correspond with the two different theories of fetishism found in Marx and Durkheim, respectively. In the second half of the article, I introduce the fashion object...... as a unique opportunity for studying the interchange between these two forms of fetishism and their respective phenomenologies. Finally, returning to Serres, I briefly consider the theoretical consequences of introducing the fashion object as a quasi-object....

  14. Blogs as Objects of Preservation

    DEFF Research Database (Denmark)

    Stepanyan, Karen; Gkotsis, George; Kalb, Hendrik

    2012-01-01

    on the existing InSPECT framework and improving its capabilities of working with complex/compound objects like blogs. The modifications enable a more thorough analysis of object structures, accentuate the differences and similarities between the framework’s two streams of analysis (i.e. Object and Stakeholder...... analysis) and, subsequently, improve the final reformulation of the properties. To demonstrate the applicability of the modified framework, the paper presents a use case of a blog preservation initiative that is informed by stakeholder interviews and evaluation of structural and technological foundations...... of blogs. It concludes by discussing the limitations of the approach and suggesting directions for future research....

  15. 分层实体制造技术中激光切割路径的优化%Optimization of Laser Cutting Paths in Laminated Object Manufacturing Technology

    Institute of Scientific and Technical Information of China (English)

    刘斌; 阮锋; 黄树槐

    2001-01-01

    The laser cutting paths and cutting speed usually influence the cutting time of each layer in the laminated object manufacturing technology. If the cutting speed is not changed, the optimization of laser cutting paths will directly influence the cutting time of each layer. So, the method of optimization of laser cutting paths is discussed in detail in this paper. It will reduce some needless moving paths and shorten the displacement in order to improve the efficient of manufacturing.%在分层实体制造中,激光切割路径和切割速度影响每层的切割加工时间.在切割速度一定的情况下,激光切割路径的优化与否将直接影响每层的切割加工时间.本文对激光切割路径进行优化的方法,可以减少一些不必要的移动路径和缩短空行程位移,从而达到提高加工效率的目的

  16. Object-Extended OLAP Querying

    DEFF Research Database (Denmark)

    Pedersen, Torben Bach; Gu, Junmin; Shoshani, Arie

    2009-01-01

    inherent in data in non-standard applications are not accommodated well by OLAP systems. In contrast, object database systems are built to handle such complexity, but do not support OLAP-type querying well. This paper presents the concepts and techniques underlying a flexible, "multi-model" federated...... system that enables OLAP users to exploit simultaneously the features of OLAP and object systems. The system allows data to be handled using the most appropriate data model and technology: OLAP systems for dimensional data and object database systems for more complex, general data. This allows data...... analysis on the OLAP data to be significantly enriched by the use of additional object data. Additionally, physical integration of the OLAP and the object data can be avoided. As a vehicle for demonstrating the capabilities of the system, a prototypical OLAP language is defined and extended to naturally...

  17. Testing Object-Oriented Software

    DEFF Research Database (Denmark)

    Caspersen, Michael Edelgaard; Madsen, Ole Lehrmann; Skov, Stefan H.

    -types that are currently being developed into production versions. To assure a high quality in the product it was decided to carry out an activ-ity regarding issues in testing OO software. The purpose of this report is to discuss the issues of testing object-oriented software. It is often claimed that testing of OO...... software is radically different form testing traditional software developed using imperative/procedural programming. Other authors claim that there is no difference. In this report we will attempt to give an answer to these questions (or at least initiate a discussion).......The report is a result of an activity within the project Centre for Object Technology (COT), case 2. In case 2 a number of pilot projects have been carried out to test the feasibility of using object technology within embedded software. Some of the pilot projects have resulted in proto...

  18. Okeanos Explorer (EX1504L2): Campaign to Address Pacific monument Science, Technology, and Ocean NEeds (CAPSTONE) NWHI Exploration Leg II

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The ship will conduct 24 hour operations consisting of daytime ROV dives and evening/nighttime mapping operations including during transit. During this cruise we...

  19. Sensemaking technology

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    Research objective: The object of the LOK research project is to gain a better understanding of the technological strategic processes in organisations by using the concept/metaphor of sensemaking. The project will investigate the technological strategies in organisations in order to gain a deeper...... understanding of the cognitive competencies and barriers towards implementing new technology in organisations. The research will therefore concentrate on researching the development process in the organisation's perception of the external environmental elements of customers, suppliers, competitors, internal...... and external technology and legislation and the internal environmental elements of structure, power relations and political arenas. All of these variables have influence on which/how technologies are implemented thus creating different outcomes all depending on the social dynamics that are triggered by changes...

  20. Sensemaking technology

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    Research objective: The object of the LOK research project is to gain a better understanding of the technological strategic processes in organisations by using the concept/metaphor of sensemaking. The project will investigate the technological strategies in organisations in order to gain a deeper...... understanding of the cognitive competencies and barriers towards implementing new technology in organisations. The research will therefore concentrate on researching the development process in the organisation's perception of the external environmental elements of customers, suppliers, competitors, internal...... and external technology and legislation and the internal environmental elements of structure, power relations and political arenas. All of these variables have influence on which/how technologies are implemented thus creating different outcomes all depending on the social dynamics that are triggered by changes...

  1. Integrating Cost Engineering and Project Management in a Junior Engineering Economics Course and a Senior Capstone Project Design Course

    Science.gov (United States)

    Tickles, Virginia C.; Li, Yadong; Walters, Wilbur L.

    2013-01-01

    Much criticism exists concerning a lack of focus on real-world problem-solving in the science, technology, engineering and mathematics (STEM) infrastructures. Many of these critics say that current educational infrastructures are incapable in preparing future scientists and engineers to solve the complex and multidisciplinary problems this society…

  2. Integrating Cost Engineering and Project Management in a Junior Engineering Economics Course and a Senior Capstone Project Design Course

    Science.gov (United States)

    Tickles, Virginia C.; Li, Yadong; Walters, Wilbur L.

    2013-01-01

    Much criticism exists concerning a lack of focus on real-world problem-solving in the science, technology, engineering and mathematics (STEM) infrastructures. Many of these critics say that current educational infrastructures are incapable in preparing future scientists and engineers to solve the complex and multidisciplinary problems this society…

  3. Objective Audiometry using Ear-EEG

    DEFF Research Database (Denmark)

    Christensen, Christian Bech; Kidmose, Preben

    therefore be an enabling technology for objective audiometry out of the clinic, allowing regularly fitting of the hearing aids to be made by the users in their everyday life environment. The objective of this study is to investigate the application of ear-EEG in objective audiometry....

  4. Course Objectives: Electronic Fundamentals, EL16.

    Science.gov (United States)

    Wilson, David H.

    The general objective, recommended text, and specific objectives of a course titled "Electronic Fundamentals," as offered at St. Lawrence College of Applied Arts and Technology, are provided. The general objective of the course is "to acquire an understanding of diodes, transistors, and tubes, and so be able to analyze the operation…

  5. Object Oriented Databases: a reality

    Directory of Open Access Journals (Sweden)

    GALANTE, A. C.

    2009-06-01

    Full Text Available This article aims to demonstrate that the new technology of oriented objects database can be used and is fully available to developers who wish to start in the "entirely OO world”. It is shown that the basic concepts of oriented objects, which the main types of database and in order to give a more precise focus on the database oriented objects. Furthermore, it shows also the use of the database objects aimed at explaining the types of queries that can take place and how the conduct, showing that the OQL syntax is not as far of the syntax of SQL, but with more advanced features and facilitating the tracing data. All done with practical examples and easy to be understood.

  6. Selecting a Reference Object

    Science.gov (United States)

    Miller, Jared E.; Carlson, Laura A.; Hill, Patrick L.

    2011-01-01

    One way to describe the location of an object is to relate it to another object. Often there are many nearby objects, each of which could serve as a candidate to be the reference object. A common theoretical assumption is that features that make a given object salient relative to the candidate set are instrumental in determining which is selected.…

  7. Beyond the Object

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available Object orientation (OO is regained not only in all components of integrate development media but it remarks in the rest of software world from operating system to last application domain - of course, with different intensity and success. A clear prove of OO application in all situations is the development of a wide range of industrial applications. OO technology allows drawing of relation between the geometry, topology and dimensions of data on a class hierarchy; thus, the observation of the amount of data gained by research in many scientific domains is facilitated through class libraries both for graphic primitives and for events examination. In conformity to all waiting, OO asserts in every distributive system, there are very important the applications for making open systems customer-server and dis-tributed applications in Java. Finally OO application in robot's programming and modeling needn't be omitted. However, far to be panacea, OO has also shades which will be researched so on.

  8. Specification of Concurrent Objects

    DEFF Research Database (Denmark)

    Sørensen, Morten U.

    relation over two objects and an event. In the model, objects can be composed by parallel composition, encapsulation, and hiding of operations. Refinement between objects is defined as fair trace inclusion.A specification language is presented where objects can be specified operationally by abstract......Concurrent objects are named concurrent processes that interact by invoking each other's operations. We describe how such concurrent objects can be specified, how objects can be composed, and how it can be shown that one object refines another.First a model is defined, based on a transition...

  9. Programming in an object-oriented environment

    CERN Document Server

    Ege, Raimund K

    1992-01-01

    Programming in an Object-Oriented Environment provides an in-depth look at the concepts behind the technology of object-oriented programming.This book explains why object-oriented programming has the potential to vastly improve the productivity of programmers and how to apply this technology in a practical environment. Many programming examples are included, focusing on how different programming languages support the core of object-oriented concepts. C++ is used as the main sample language throughout this text.This monograph consists of two major parts. Part I provides an introduction to objec

  10. Automatic object recognition

    Science.gov (United States)

    Ranganath, H. S.; Mcingvale, Pat; Sage, Heinz

    1988-01-01

    Geometric and intensity features are very useful in object recognition. An intensity feature is a measure of contrast between object pixels and background pixels. Geometric features provide shape and size information. A model based approach is presented for computing geometric features. Knowledge about objects and imaging system is used to estimate orientation of objects with respect to the line of sight.

  11. Object-oriented Analysis, Research on Design and Programming Skills of Vocational Software Technology Professional Students%高职软件技术专业学生的面向对象分析、设计和编程能力培养的研究

    Institute of Scientific and Technical Information of China (English)

    冯向科; 邓莹; 彭勇

    2011-01-01

    The study by researching object-oriented software development processes and software engineer job, vocational reconstruction of object-oriented software technology, professional courses, propose targeted capacity-building object-oriented program.%本研究通过调研面向对象的软件开发流程和软件工程师岗位要求,重构高职软件技术专业的面向对象课程,提出针对性的面向对象能力培养方案。

  12. Object reading: text recognition for object recognition

    NARCIS (Netherlands)

    Karaoglu, S.; van Gemert, J.C.; Gevers, T.

    2012-01-01

    We propose to use text recognition to aid in visual object class recognition. To this end we first propose a new algorithm for text detection in natural images. The proposed text detection is based on saliency cues and a context fusion step. The algorithm does not need any parameter tuning and can d

  13. Defining Learning Objectives

    Institute of Scientific and Technical Information of China (English)

    霍鑫红

    2014-01-01

    <正>This article attempts to introduce the teacher to developments in the area of specifying learning objectives.When you have studied this article carefully,you should be able to(a)distinguish between statements of aims and statements of objectives,(b)discuss the merits of writing objectives from the point of view of the learner,and(c)write both complete and abbreviated statements of learning objectives for different language skills,functions,and notions.

  14. [Historiography of medical objects].

    Science.gov (United States)

    Cid, Felip

    2008-01-01

    It has become acceptable among historians of medicine to profess a predilection for the historiography of medical ideas. But it is justified all the same to ask whether the logical connection really caused the origin, the change, or the disappearance of the medical objects. The interaction of ideas and medical objects assure as much objectivity as possible. In consequence, the contents of the museums, medical objects, is an aspect rather that a branch of the history of medicine.

  15. Learning Objects and Gerontology

    Science.gov (United States)

    Weinreich, Donna M.; Tompkins, Catherine J.

    2006-01-01

    Virtual AGE (vAGE) is an asynchronous educational environment that utilizes learning objects focused on gerontology and a learning anytime/anywhere philosophy. This paper discusses the benefits of asynchronous instruction and the process of creating learning objects. Learning objects are "small, reusable chunks of instructional media" Wiley…

  16. Survivability via Control Objectives

    Energy Technology Data Exchange (ETDEWEB)

    CAMPBELL,PHILIP L.

    2000-08-11

    Control objectives open an additional front in the survivability battle. A given set of control objectives is valuable if it represents good practices, it is complete (it covers all the necessary areas), and it is auditable. CobiT and BS 7799 are two examples of control objective sets.

  17. Presentation on Instructional Objectives

    Science.gov (United States)

    Naz, Bibi Asia

    2009-01-01

    "Learning can be defined as change in a student's capacity for performance as a result of experience" (Kenneth D. Moore). The intended changes should be specified in instructional objectives. Viewed in this context, an objective can be defined as a clear and unambiguous description of your instructional intent. An objective is not a…

  18. On the Crime Object

    Science.gov (United States)

    Akutaev, Rasul M.; Magomedov, Guseyn B.

    2016-01-01

    The relevance of the research of this problem is caused by the theoretical and practical needs of a specific concept of the crime object as one of the corpus delicti signs essentially the determining and defining its object and objective side, thereby--the nature of socially dangerous act. Besides, being a facultative sign of corpus delicti, the…

  19. Birth of the Object: Detection of Objectness and Extraction of Object Shape through Object Action Complexes

    DEFF Research Database (Denmark)

    Kraft, Dirk; Pugeault, Nicolas; Baseski, Emre

    2008-01-01

    interact. First, by making use of an object independent grasping mechanism, physical control over potential objects can be gained. Having evaluated the initial grasping mechanism as being successful, a second behavior extracts the object shape by making use of prediction based on the motion induced...

  20. Objects in Motion

    Science.gov (United States)

    Damonte, Kathleen

    2004-01-01

    One thing scientists study is how objects move. A famous scientist named Sir Isaac Newton (1642-1727) spent a lot of time observing objects in motion and came up with three laws that describe how things move. This explanation only deals with the first of his three laws of motion. Newton's First Law of Motion says that moving objects will continue…

  1. Ownership and Object History

    Science.gov (United States)

    Friedman, Ori; Neary, Karen R.; Defeyter, Margaret A.; Malcolm, Sarah L.

    2011-01-01

    Appropriate behavior in relation to an object often requires judging whether it is owned and, if so, by whom. The authors propose accounts of how people make these judgments. Our central claim is that both judgments often involve making inferences about object history. In judging whether objects are owned, people may assume that artifacts (e.g.,…

  2. 47 CFR 202.0 - Objectives.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Objectives. 202.0 Section 202.0 Telecommunication OFFICE OF SCIENCE AND TECHNOLOGY POLICY AND NATIONAL SECURITY COUNCIL NATIONAL SECURITY AND EMERGENCY PREPAREDNESS PLANNING AND EXECUTION § 202.0 Objectives. (a) During, or in anticipation of, a...

  3. Objective Audiometry using Ear-EEG

    DEFF Research Database (Denmark)

    Christensen, Christian Bech; Kidmose, Preben

    life. Ear-EEG may therefore be an enabling technology for objective audiometry out of the clinic, allowing regularly fitting of the hearing aids to be made by the users in their everyday life environment. In this study we investigate the application of ear-EEG in objective audiometry....

  4. Using Learning Objects to Teach Programming Languages

    Science.gov (United States)

    Cavus, Nadire; Ibrahim, Dogan

    2004-01-01

    The idea of using "Learning Objects" in teaching has become very popular in the last few years. Although the concept of using objects in teaching is not new, the power of the computer technology and the Internet gives educators large opportunities and endless combination of possibilities in applying new theories to web-based education.…

  5. Reviews Equipment: BioLite Camp Stove Game: Burnout Paradise Equipment: 850 Universal interface and Capstone software Equipment: xllogger Book: Science Magic Tricks and Puzzles Equipment: Spinthariscope Equipment: DC Power Supply HY5002 Web Watch

    Science.gov (United States)

    2013-05-01

    WE RECOMMEND BioLite CampStove Robust and multifaceted stove illuminates physics concepts 850 Universal interface and Capstone software Powerful data-acquisition system offers many options for student experiments and demonstrations xllogger Obtaining results is far from an uphill struggle with this easy-to-use datalogger Science Magic Tricks and Puzzles Small but perfectly formed and inexpensive book packed with 'magic-of-science' demonstrations Spinthariscope Kit for older students to have the memorable experience of 'seeing' radioactivity WORTH A LOOK DC Power Supply HY5002 Solid and effective, but noisy and lacks portability HANDLE WITH CARE Burnout Paradise Car computer game may be quick off the mark, but goes nowhere fast when it comes to lab use WEB WATCH 'Live' tube map and free apps would be a useful addition to school physics, but maths-questions website of no more use than a textbook

  6. Per Object statistical analysis

    DEFF Research Database (Denmark)

    2008-01-01

    Variable. This procedure was developed in order to be able to export objects as ESRI shape data with the 90-percentile of the Hue of each object's pixels as an item in the shape attribute table. This procedure uses a sub-level single pixel chessboard segmentation, loops for each of the objects......This RS code is to do Object-by-Object analysis of each Object's sub-objects, e.g. statistical analysis of an object's individual image data pixels. Statistics, such as percentiles (so-called "quartiles") are derived by the process, but the return of that can only be a Scene Variable, not an Object...... of a specific class in turn, and uses as pair of PPO stages to derive the statistics and then assign them to the objects' Object Variables. It may be that this could all be done in some other, simply way, but several other ways that were tried did not succeed. The procedure ouptut has been tested against...

  7. Words without Objects

    Directory of Open Access Journals (Sweden)

    Henry Laycock

    1998-12-01

    Full Text Available Resolution of the problem of mass nouns depends on an expansion of our semantic/ontological taxonomy. Semantically, mass nouns are neither singular nor plural; they apply to neither just one object, nor to many objects, at a time. But their deepest kinship links them to the plural. A plural phrase — 'the cats in Kingston' — does not denote a single plural thing, but merely many distinct things. Just so, 'the water in the lake' does not denote a single aggregate — it is not ONE, but rather MUCH. The world is not the totality of singular objects, plural objects, and mass objects; for there are no plural or mass objects. It is the totality of single objects and (just stuff.

  8. Extending Object-Oriented Languages by Declarative Specifications of Complex Objects using Answer-Set Programming

    CERN Document Server

    Oetsch, Johannes; Tompits, Hans

    2011-01-01

    Many applications require complexly structured data objects. Developing new or adapting existing algorithmic solutions for creating such objects can be a non-trivial and costly task if the considered objects are subject to different application-specific constraints. Often, however, it is comparatively easy to declaratively describe the required objects. In this paper, we propose to use answer-set programming (ASP)---a well-established declarative programming paradigm from the area of artificial intelligence---for instantiating objects in standard object-oriented programming languages. In particular, we extend Java with declarative specifications from which the required objects can be automatically generated using available ASP solver technology.

  9. Virtual Objects on the Internet of Things

    Directory of Open Access Journals (Sweden)

    Jordán Pascual Espada

    2011-12-01

    Full Text Available As technology advances more and more "things" began to appear in digital format, such as: tickets, agendas, books, electronic purses, etc. Internet of things encourages communication and integration of physical objects with each other and people to automate tasks and improve efficiency. Digital objects like physicists should be part of Internet of Things but the different structures of these digital objects causes in most cases these digital objects can interact only with specific applications that know the specific format. Based on the problems in this paper proposes a structure that supports the generic construction of virtual objects irrespective of their business logic and their integration with other applications and "things".

  10. A Research of Objectives and Contents of Information and Technology Curriculum Based on Psychology of Learning%基于学习心理学的信息技术课程目标和内容的研究

    Institute of Scientific and Technical Information of China (English)

    赵春声

    2012-01-01

    以学习心理学理论为指导来探索学校教育中不同学科学习与教学的规律成为当代心理学与教育相结合的一大趋势。学习心理学拓展了学习心理学在中小学课程中运用的学科领域,促进教师将信息技术课程的学习与教学相结合,为创建心理学取向的信息技术教学论奠定基础。%It is a trend to investigate the learning and teaching rules in different disciplines under the guidance of psychology of learning in the integration of psychology and education. This article first analyzes the psychological base of "three-dimensional goals" of information technology curriculum, and then analyzes the content of information technology curriculum with the theory of learning classification. Finally, it proposes that the application of psychology of learning to information technology curriculum promotes the integration of psychology of learning and specific disciplines and lays the foundation for the construction of psychology-based information technology curriculum.

  11. Early object relations into new objects.

    Science.gov (United States)

    Downey, T W

    2001-01-01

    Two strands of change are suggested by this review, one maturational, the other therapeutic or developmental (Hartmann and Kris, 1945). By "maturational" I mean to suggest energies that infuse the individual from earliest life in a manner that includes object relations, but for the healthy exercise of which object relations per se need not be of central and crucial importance. Within wide limits such energies may be delayed until growth conditions prevail without significant distortion of certain of the organism's ego functions. Therapeutic change is analogous to developmental change in that both involve the crucial presence of another to release energies. In therapeutic change these are energies that have been repressed beyond the reach of developmental dynamics. In everyday development crisis and synthesis alternate in conjunction with new and emerging objects to add to the psychological structures brought to the fore by maturation. In many instances, as we see with John, over time and in a less focussed manner, developmental changes can approximate therapeutic change and visa versa. Freud-Dann in their "experiment" pursued one line, in which the equipmental delay brought on by extremely adverse living circumstances was redressed by providing an interpersonally enriching, loving, developmentally facilitating milieu. The sketches of individual children and John's subsequent story provide a perspective into what becomes the stuff of growth and what remains the stuff of neurosis. The developmental reserves and ego resilience of these children were impressive but probably not extraordinary. Usual growth ensued as soon as they were provided with the rich soil of Bulldogs Bank instead of the desert sand of the Tereszin concentration camp. However, no one can escape such adverse circumstances without having taken in the stuff of neurosis. Affects and percepts that were not assimilatable or even available to consciousness at the time remain buried in the unconscious

  12. Objects, materiality and meaning

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Lindegaard, Hanne

    2008-01-01

    The present research work investigates the relation between physical objects, their materiality, understood as the physical substances they are made from, and the communication from the objects. In product design of physical objects the communicative aspects are just as important as the function ...... be written into the object. The materials are therefore carriers of communication, even though this is dependent of the cultural context and the environment which the object will be part of. However the designer has only minor influence on those.......The present research work investigates the relation between physical objects, their materiality, understood as the physical substances they are made from, and the communication from the objects. In product design of physical objects the communicative aspects are just as important as the function...... of the object, and the designers aim is therefore to tune both in order to achieve a desired goal. To do so the designer basically has 2 options: Alteration of the physical shape of the object and the selection of materials. Through the manipulation of shape and materials can symbolic and sensory information...

  13. The fundamentals of object-oriented database management systems.

    Science.gov (United States)

    Plateau, D

    1993-01-01

    The purpose of this document is to characterize the two technologies (database and object-oriented technologies) which constitute the foundation of object-oriented database management systems. The O2 Object-Oriented DataBase Management System is then described as an example of this type of system.

  14. Scaled-Free Objects

    CERN Document Server

    Grilliette, Will

    2010-01-01

    Several functional analysts and C*-algebraists have been moving toward a categorical means of understanding normed objects. In this work, I address a primary issue with adapting these abstract concepts to functional analytic settings, the lack of free objects. Using a new object, called a "crutched set", and associated categories, I devise generalized construction of normed objects as a left adjoint functor to a natural forgetful functor. Further, the universal property in each case yields a "scaled-free" mapping property, which extends previous notions of `"free" normed objects. In particular, I construct the following types of scaled-free objects: Banach spaces, Banach algebras, C*-algebras, operator spaces, and operator algebras. In subsequent papers, this scaled-free property, coupled with the associated functorial results, will give rise to a new view of presentation theory for C*-algebras, which inherits many properties and constructions from its algebraic counterpart.

  15. Conceivability Theses and Objections

    DEFF Research Database (Denmark)

    the thesis is more fashionable in the current debate than defending conceivability as anything but one psychological heuristic device among others with which we form beliefs about modality. In this paper, I shall offer a way of demarcating conceivability theses in a way that offers a concise overview, and I...... will try to provide an overview also of the different objections that have been and are leveled at the conceivability theses. A number of these are problems for an epistemology of modality generally. I will focus on the objections that are peculiar to conceivability theses: the Standard Objection...... and the Uselessness Objection. The Standard Objection targets the second premise in an argument for possibility from conceivability, that what is conceived is possible, typically by offering counterexamples in the form of conceivable impossibilities. The Uselessness Objection targets the first premise in an argument...

  16. Reasoning about Function Objects

    Science.gov (United States)

    Nordio, Martin; Calcagno, Cristiano; Meyer, Bertrand; Müller, Peter; Tschannen, Julian

    Modern object-oriented languages support higher-order implementations through function objects such as delegates in C#, agents in Eiffel, or closures in Scala. Function objects bring a new level of abstraction to the object-oriented programming model, and require a comparable extension to specification and verification techniques. We introduce a verification methodology that extends function objects with auxiliary side-effect free (pure) methods to model logical artifacts: preconditions, postconditions and modifies clauses. These pure methods can be used to specify client code abstractly, that is, independently from specific instantiations of the function objects. To demonstrate the feasibility of our approach, we have implemented an automatic prover, which verifies several non-trivial examples.

  17. On Coordinating Collaborative Objects

    CERN Document Server

    Imine, Abdessamad

    2010-01-01

    A collaborative object represents a data type (such as a text document) designed to be shared by a group of dispersed users. The Operational Transformation (OT) is a coordination approach used for supporting optimistic replication for these objects. It allows the users to concurrently update the shared data and exchange their updates in any order since the convergence of all replicas, i.e. the fact that all users view the same data, is ensured in all cases. However, designing algorithms for achieving convergence with the OT approach is a critical and challenging issue. In this paper, we propose a formal compositional method for specifying complex collaborative objects. The most important feature of our method is that designing an OT algorithm for the composed collaborative object can be done by reusing the OT algorithms of component collaborative objects. By using our method, we can start from correct small collaborative objects which are relatively easy to handle and incrementally combine them to build more ...

  18. Kuiper Binary Object Formation

    OpenAIRE

    Nazzario, R. C.; Orr, K.; Covington, C.; Kagan, D.; Hyde, T. W.

    2005-01-01

    It has been observed that binary Kuiper Belt Objects (KBOs) exist contrary to theoretical expectations. Their creation presents problems to most current models. However, the inclusion of a third body (for example, one of the outer planets) may provide the conditions necessary for the formation of these objects. The presence of a third massive body not only helps to clear the primordial Kuiper Belt but can also result in long lived binary Kuiper belt objects. The gravitational interaction betw...

  19. Propelling Extended Objects

    Science.gov (United States)

    Humbert, Richard

    2010-01-01

    A force acting on just part of an extended object (either a solid or a volume of a liquid) can cause all of it to move. That motion is due to the transmission of the force through the object by its material. This paper discusses how the force is distributed to all of the object by a gradient of stress or pressure in it, which creates the local…

  20. Objective-C

    CERN Document Server

    DeVoe, Jiva

    2011-01-01

    A soup-to-nuts guide on the Objective-C programming language. Objective-C is the language behind Cocoa and Cocoa Touch, which is the Framework of applications written for the Macintosh, iPod touch, iPhone, and iPad platforms. Part of the Developer Reference series covering the hottest Apple topics, this book covers everything from the basics of the C language to advanced aspects of Apple development. You'll examine Objective-C and high-level subjects of frameworks, threading, networking, and much more.: Covers the basics of the C language and then quickly moves onto Objective-C and more advanc

  1. Reinspiring Japanese Educational Objectives.

    Science.gov (United States)

    Wada, Shuji

    1993-01-01

    Provides a brief overview of the history of modern Japanese education, its early modernization, and the policy of intertwining the Japanese ideology with Western technology. Proposes the establishment of a new Buddhist-inspired philosophy of education. (GLR)

  2. Conscience and Conscientious Objections

    NARCIS (Netherlands)

    Schinkel, Anders

    2007-01-01

    In Western countries conscientious objection is usually accommodated in various ways, at least in certain areas (military conscription, medicine) and to some extent. It appears to be regarded as fundamentally different from other kinds of objection. But why? This study argues that conscientious obje

  3. The objective image

    NARCIS (Netherlands)

    Galison, Peter

    2010-01-01

    In his work, Galison approaches the historical development of objectivity as an important factor that affects the way we experience and imagine ourselves in communities of knowledge and in democratic societies. Prof. Peter Galison has demonstrated that scientific objectivity has a history and he

  4. Choosing for learning objects

    NARCIS (Netherlands)

    Schoonenboom, Judith; Emans, Bruno; Meijer, Joost

    2006-01-01

    Choosing for learning objects discusses eight educational ambitions and the possible roles of learning objects in realising these ambitions. The eight educational ambitions are: (1) Creating independent learning pathways, for example for lifelong learners; (2) Making education more flexible; (3) Res

  5. On Objects and Events

    DEFF Research Database (Denmark)

    Eugster, Patrick Thomas; Guerraoui, Rachid; Damm, Christian Heide

    2001-01-01

    This paper presents linguistic primitives for publish/subscribe programming using events and objects. We integrate our primitives into a strongly typed object-oriented language through four mechanisms: (1) serialization, (2) multiple sub typing, (3) closures, and (4) deferred code evaluation. We...

  6. Choosing for learning objects

    NARCIS (Netherlands)

    Schoonenboom, Judith; Emans, Bruno; Meijer, Joost

    2006-01-01

    Choosing for learning objects discusses eight educational ambitions and the possible roles of learning objects in realising these ambitions. The eight educational ambitions are: (1) Creating independent learning pathways, for example for lifelong learners; (2) Making education more flexible; (3) Res

  7. Composing Concurrent Objects

    NARCIS (Netherlands)

    Bergmans, Lodewijk

    1994-01-01

    Adopting the object-oriented paradigm for the development of large and complex software systems offers several advantages, of which increased extensibility and reusability are the most prominent ones. The object-oriented model is also quite suitable for modelling concurrent systems. However, it

  8. Programs as Data Objects

    DEFF Research Database (Denmark)

    This book constitutes the refereed proceedings of the Second Symposium on Programs as Data Objects, PADO 2001, held in Aarhus, Denmark, in May 2001. The 14 revised full papers presented were carefully reviewed and selected from 30 submissions. Various aspects of looking at programs as data objects...

  9. Superlensing Microscope Objective Lens

    CERN Document Server

    Yan, Bing; Parker, Alan; Lai, Yukun; Thomas, John; Yue, Liyang; Monks, James

    2016-01-01

    Conventional microscope objective lenses are diffraction limited, which means that they cannot resolve features smaller than half the illumination wavelength. Under white light illumination, such resolution limit is about 250-300 nm for an ordinary microscope. In this paper, we demonstrate a new superlensing objective lens which has a resolution of about 100 nm, offering at least two times resolution improvement over conventional objectives in resolution. This is achieved by integrating a conventional microscope objective lens with a superlensing microsphere lens using a 3D printed lens adaptor. The new objective lens was used for label-free super-resolution imaging of 100 nm-sized engineering and biological samples, including a Blu-ray disc sample, semiconductor chip and adenoviruses. Our work creates a solid base for developing a commercially-viable superlens prototype, which has potential to transform the field of optical microscopy and imaging.

  10. Kuiper Binary Object Formation

    CERN Document Server

    Nazzario, R C; Covington, C; Kagan, D; Hyde, T W

    2005-01-01

    It has been observed that binary Kuiper Belt Objects (KBOs) exist contrary to theoretical expectations. Their creation presents problems to most current models. However, the inclusion of a third body (for example, one of the outer planets) may provide the conditions necessary for the formation of these objects. The presence of a third massive body not only helps to clear the primordial Kuiper Belt but can also result in long lived binary Kuiper belt objects. The gravitational interaction between the KBOs and the third body causes one of four effects; scattering into the Oort cloud, collisions with the growing protoplanets, formation of binary pairs, or creation of a single Kuiper belt object. Additionally, the initial location of the progenitors of the Kuiper belt objects also has a significant effect on binary formation.

  11. Beginning Objective-C

    CERN Document Server

    Dovey, James

    2012-01-01

    Objective-C is today's fastest growing programming language, at least in part due to the popularity of Apple's Mac, iPhone and iPad. Beginning Objective-C is for you if you have some programming experience, but you're new to the Objective-C programming language and you want a modern-and fast-way forwards to your own coding projects. Beginning Objective-C offers you a modern programmer's perspective on Objective-C courtesy of two of the best iOS and Mac developers in the field today, and gets you programming to the best of your ability in this important language.  It gets you rolling fast into

  12. Hardware Objects for Java

    DEFF Research Database (Denmark)

    Schoeberl, Martin; Thalinger, Christian; Korsholm, Stephan

    2008-01-01

    Java, as a safe and platform independent language, avoids access to low-level I/O devices or direct memory access. In standard Java, low-level I/O it not a concern; it is handled by the operating system. However, in the embedded domain resources are scarce and a Java virtual machine (JVM) without...... an underlying middleware is an attractive architecture. When running the JVM on bare metal, we need access to I/O devices from Java; therefore we investigate a safe and efficient mechanism to represent I/O devices as first class Java objects, where device registers are represented by object fields. Access...... to those registers is safe as Java’s type system regulates it. The access is also fast as it is directly performed by the bytecodes getfield and putfield. Hardware objects thus provide an object-oriented abstraction of low-level hardware devices. As a proof of concept, we have implemented hardware objects...

  13. Cultivating objects in interaction

    DEFF Research Database (Denmark)

    Hazel, Spencer

    2014-01-01

    is chapter explores patterns of repeated orientations to physical objects in interactants’ visuo-spatial and haptic surround. A number of examples are presented from advice-giving activities in various institutional settings, where participants-in-interaction initially draw on material objects...... at hand while pursuing a particular line of explanation, and then return to these objects at later intervals. e analysis suggests that the objects are afforded representational properties through their being anchored to some referent in the talk, and that participants subsequently draw...... on these associations for describing, disambiguating or clarifying aspects of the relatively complex procedural frameworks discussed in the settings. is suggests that the temporal stability of material objects available to participants makes them an ideal resource to be developed as visual motifs....

  14. Hardware Objects for Java

    DEFF Research Database (Denmark)

    Schoeberl, Martin; Thalinger, Christian; Korsholm, Stephan

    2008-01-01

    Java, as a safe and platform independent language, avoids access to low-level I/O devices or direct memory access. In standard Java, low-level I/O it not a concern; it is handled by the operating system. However, in the embedded domain resources are scarce and a Java virtual machine (JVM) without...... an underlying middleware is an attractive architecture. When running the JVM on bare metal, we need access to I/O devices from Java; therefore we investigate a safe and efficient mechanism to represent I/O devices as first class Java objects, where device registers are represented by object fields. Access...... to those registers is safe as Java’s type system regulates it. The access is also fast as it is directly performed by the bytecodes getfield and putfield. Hardware objects thus provide an object-oriented abstraction of low-level hardware devices. As a proof of concept, we have implemented hardware objects...

  15. Tracking of deformable objects

    Science.gov (United States)

    Aswani, Parimal; Wong, K. K.; Chong, Man N.

    2000-12-01

    Tracking of moving-objects in image sequences is needed for several video processing applications such as content-based coding, object oriented compression, object recognition and more recently for video object plane extraction in MPEG-4 coding. Tracking is a natural follow-up of motion-based segmentation. It is a fast and efficient method to achieve coherent motion segments along the temporal axis. Segmenting out moving objects for each and every frame in a video sequence is a computationally expensive approach. Thus, for better performance, semi-automatic segmentation is an acceptable compromise as automatic segmentation approaches rely heavily on prior assumptions. In semi-automatic segmentation approaches, motion-segmentation is performed only on the initial frame and the moving object is tracked in subsequent frames using tracking algorithms. In this paper, a new model for object tracking is proposed, where the image features -- edges, intensity pattern, object motion and initial keyed-in contour (by the user) form the prior and likelihood model of a Markov Random Field (MRF) model. Iterated Conditional Mode (ICM) is used for the minimization of the global energy for the MRF model. The motion segment for each frame is initialized using the segment information from the previous frame. For the initial frame, the motion segment is obtained by manually keying in the object contour. The motion-segments obtained using the proposed model are coherent and accurate. Experimental results on tracking using the proposed algorithm for different sequences -- Bream, Alexis and Claire are presented in this paper. The results obtained are accurate and can be used for a variety of applications including MPEG-4 Video Object Plane (VOP) extraction.

  16. Unifying Subjectivity and Objectivity

    Directory of Open Access Journals (Sweden)

    Murugesan Chandrasekaran

    2016-10-01

    Full Text Available The contribution of modern science to the progress of civilization is immeasurable. Even its tendency toward exclusive concentration on the objective world has had salutary effects of great value. Modern science has wiped away much that was merely superstitious or speculative. Its rejection of unfounded opinions and prejudices has helped the thinking mind question conventional beliefs, shed preferences and prejudices, and challenge established authority. But modern systems thinking inherited from natural science is the suppression of the subjective dimension of reality. Many complex systems are an attempt to define and represent all subjective experience in physical terms. The modern man has a bias towards objectivity. The powerful influence of sense impressions on his mind and thinking makes him ignore the subjective experience and consider only objective facts as a valid, legitimate and representation of reality. Observing objective factors that are physical is easier than observing subjective factors that are subtle. The mechanistic view of reality has led to the rejection of the role of the individual in social development as insignificant. The individuals determine the development of society. Their social power has its roots both in subjective factors and objective factors. Economy, politics, society, and culture are inseparable dimensions of a single integrated reality. Subject and object constitute an integrated whole. The mind sees them as separate and independent. Or it views one as completely subordinate to the other. Unbiased approach to the study of all human experiences may prove that subject and object are interdependent dimensions or elements of reality.

  17. Two Interesting Southern Objects

    Science.gov (United States)

    Gyulbudaghian, A. L.

    2016-06-01

    Two southern objects are studied. The first, the planetary nebula PK 349-01.1, is of interest because it has a chain of jets ejected from the central star. 12C(1-0) observations of the vicinity of this object reveal red- and blue-shifted molecular outflows. The second object is a star formation region consisting of two groups of IR stars. These groups have a trapezium-like configuration. Two stars in one of these groups are associated with a ring-shaped nebulae. This star formation region is associated with a new radial system of dark globules.

  18. Cultivating objects in interaction

    DEFF Research Database (Denmark)

    Hazel, Spencer

    2014-01-01

    is chapter explores patterns of repeated orientations to physical objects in interactants’ visuo-spatial and haptic surround. A number of examples are presented from advice-giving activities in various institutional settings, where participants-in-interaction initially draw on material objects...... on these associations for describing, disambiguating or clarifying aspects of the relatively complex procedural frameworks discussed in the settings. is suggests that the temporal stability of material objects available to participants makes them an ideal resource to be developed as visual motifs....

  19. [Achievement of therapeutic objectives].

    Science.gov (United States)

    Mantilla, Teresa

    2014-07-01

    Therapeutic objectives for patients with atherogenic dyslipidemia are achieved by improving patient compliance and adherence. Clinical practice guidelines address the importance of treatment compliance for achieving objectives. The combination of a fixed dose of pravastatin and fenofibrate increases the adherence by simplifying the drug regimen and reducing the number of daily doses. The good tolerance, the cost of the combination and the possibility of adjusting the administration to the patient's lifestyle helps achieve the objectives for these patients with high cardiovascular risk. Copyright © 2014 Sociedad Española de Arteriosclerosis y Elsevier España, S.L. All rights reserved.

  20. View-based 3-D object retrieval

    CERN Document Server

    Gao, Yue

    2014-01-01

    Content-based 3-D object retrieval has attracted extensive attention recently and has applications in a variety of fields, such as, computer-aided design, tele-medicine,mobile multimedia, virtual reality, and entertainment. The development of efficient and effective content-based 3-D object retrieval techniques has enabled the use of fast 3-D reconstruction and model design. Recent technical progress, such as the development of camera technologies, has made it possible to capture the views of 3-D objects. As a result, view-based 3-D object retrieval has become an essential but challenging res

  1. Direct manipulation of virtual objects

    Science.gov (United States)

    Nguyen, Long K.

    Interacting with a Virtual Environment (VE) generally requires the user to correctly perceive the relative position and orientation of virtual objects. For applications requiring interaction in personal space, the user may also need to accurately judge the position of the virtual object relative to that of a real object, for example, a virtual button and the user's real hand. This is difficult since VEs generally only provide a subset of the cues experienced in the real world. Complicating matters further, VEs presented by currently available visual displays may be inaccurate or distorted due to technological limitations. Fundamental physiological and psychological aspects of vision as they pertain to the task of object manipulation were thoroughly reviewed. Other sensory modalities -- proprioception, haptics, and audition -- and their cross-interactions with each other and with vision are briefly discussed. Visual display technologies, the primary component of any VE, were canvassed and compared. Current applications and research were gathered and categorized by different VE types and object interaction techniques. While object interaction research abounds in the literature, pockets of research gaps remain. Direct, dexterous, manual interaction with virtual objects in Mixed Reality (MR), where the real, seen hand accurately and effectively interacts with virtual objects, has not yet been fully quantified. An experimental test bed was designed to provide the highest accuracy attainable for salient visual cues in personal space. Optical alignment and user calibration were carefully performed. The test bed accommodated the full continuum of VE types and sensory modalities for comprehensive comparison studies. Experimental designs included two sets, each measuring depth perception and object interaction. The first set addressed the extreme end points of the Reality-Virtuality (R-V) continuum -- Immersive Virtual Environment (IVE) and Reality Environment (RE). This

  2. Generally Mysterious Objects (GMO

    Directory of Open Access Journals (Sweden)

    2005-01-01

    Full Text Available Plant GM technology and the application of recombinant DNA techniques to generate crop plants is the subject of major debate in society today. The research benefits of this technology are clearly defined: it offers the potential of rapid breeding programmes to enable crops to survive, yields to increase and the full sustainable manufacturing power of plants to become realised. Potential associated risks such as food safety, environmental biodiversity and the relationships of big business in the developed world to subsistence farming in developing countries are also discussed.

  3. Multi-objective convex programming problem arising in multivariate ...

    African Journals Online (AJOL)

    user

    International Journal of Engineering, Science and Technology. Vol. ... However, although the consideration of multiple objectives may seem a novel concept, virtually any nontrivial, real world problem invariably involves multiple objectives.

  4. Piles of objects

    KAUST Repository

    Hsu, Shu-Wei

    2010-01-01

    We present a method for directly modeling piles of objects in multi-body simulations. Piles of objects represent some of the more interesting, but also most time-consuming portion of simulation. We propose a method for reducing computation in many of these situations by explicitly modeling the piles that the objects may form into. By modeling pile behavior rather than the behavior of all individual objects, we can achieve realistic results in less time, and without directly modeling the frictional component that leads to desired pile shapes. Our method is simple to implement and can be easily integrated with existing rigid body simulations. We observe notable speedups in several rigid body examples, and generate a wider variety of piled structures than possible with strict impulse-based simulation. © 2010 ACM.

  5. This elusive objective existence

    CERN Document Server

    Mohrhoff, U

    2004-01-01

    Zurek's existential interpretation of quantum mechanics suffers from three classical prejudices, including the belief that space and time are intrinsically and infinitely differentiated. They compel him to relativize the concept of objective existence in two ways. The elimination of these prejudices makes it possible to recognize the quantum formalism's ontological implications - the relative and contingent reality of spatiotemporal distinctions and the extrinsic and finite spatiotemporal differentiation of the physical world - which in turn makes it possible to arrive at an unqualified objective existence. Contrary to a widespread misconception, viewing the quantum formalism as being fundamentally a probability algorithm does not imply that quantum mechanics is concerned with states of knowledge rather than states of Nature. On the contrary, it makes possible a complete and strongly objective description of the physical world that requires no reference to observers. What objectively exists, in a sense that r...

  6. Safety objectives for 2014

    CERN Multimedia

    HSE Unit

    2014-01-01

    This is the third year in which the CERN Management has presented annual safety objectives for the Organization, the “HSE Objectives”.   The HSE objectives for 2014, which were announced by the Director-General at his traditional New Year’s address to the staff and were presented at the first Enlarged Directorate meeting of the year, have been drawn up and agreed in close collaboration between the DSOs, the HSE Unit and the DG himself. From safety in the workplace to radiation and environmental protection, the document emphasises that “Safety is a priority for CERN” and that safety policy is a key element in how the Organization is run. And, like all policies, it generates objectives that “serve as a general framework for action”. The HSE objectives are broken down into the following fields: occupational health and safety on sites and in the workplace, radiation protection, radiation safety, environmental protection, emerge...

  7. Protected Objects in Java

    DEFF Research Database (Denmark)

    Løvengreen, Hans Henrik; Schwarzer, Jens Christian

    1998-01-01

    We present an implementation of Ada 95's notion of protected objects in Java. The implementation comprises a class library supporting entry queues and a (pre-) compiler translating slightly decorated Java classes to pure Java classes utilizing the library.......We present an implementation of Ada 95's notion of protected objects in Java. The implementation comprises a class library supporting entry queues and a (pre-) compiler translating slightly decorated Java classes to pure Java classes utilizing the library....

  8. Choosing for learning objects

    OpenAIRE

    Schoonenboom, Judith; Emans, Bruno; Meijer, Joost

    2006-01-01

    Choosing for learning objects discusses eight educational ambitions and the possible roles of learning objects in realising these ambitions. The eight educational ambitions are: (1) Creating independent learning pathways, for example for lifelong learners; (2) Making education more flexible; (3) Responding to differences between students; (4) The joint development of learning materials together with other institutions or external parties; (5) Attuning to professional practice; (6) Attuning to...

  9. Systems Engineering Capstone Marketplace Pilot

    Science.gov (United States)

    2013-11-05

    of student work. During Phase 3/Guideline Preparation (July 1, 2013-August 31, 2013) all participating faculty distilled the lessons of the...conducted an analysis of the volume of water that could be treated using their solar and battery powered system. Given adequate sunlight, their system...useful lessons learned were distilled from these conversations. They are reported in the next section. Additionally, a recommended template schedule for

  10. 不规则镜面物体的三维重建关键技术研究%Research on the Key Technologies of Three-dimensional Reconstruction for the Irregular Mirror Objects

    Institute of Scientific and Technical Information of China (English)

    郑莉; 郑刚; 罗跃军; 陶俊

    2011-01-01

    For the mirror irregular objects,it is not the best solution to make use of close-range photogrammetry method as the image is short of available texture.Based on structured light,combined with close-range photogrammetry,it is discussed the key technical issues about three-dimensional modeling of irregular mirror objects,and deduced the mathematical model from the image point to the space point.Structured light may be used as a solution to simplify the inherent problem of finding correspondences in classical stereovision systems.Then the spatial points of the object surface are obtained quickly by space intersection,which is important and valuable for 3D measurement.%对于不规则镜面物体,由于所拍影像纹理信息不丰富采用近景摄影测量方法进行三维重建不是最佳方案。本文基于结构光的测量方法,结合近景摄影测量探讨不规则镜面物体三维建模的关键技术问题,研究推导了像点到物方空间三维点的数学模型。该方法继承了传统摄影测量方法的优点,其灵活性以及无需匹配同名点的特点。

  11. Objects of consciousness.

    Science.gov (United States)

    Hoffman, Donald D; Prakash, Chetan

    2014-01-01

    Current models of visual perception typically assume that human vision estimates true properties of physical objects, properties that exist even if unperceived. However, recent studies of perceptual evolution, using evolutionary games and genetic algorithms, reveal that natural selection often drives true perceptions to extinction when they compete with perceptions tuned to fitness rather than truth: Perception guides adaptive behavior; it does not estimate a preexisting physical truth. Moreover, shifting from evolutionary biology to quantum physics, there is reason to disbelieve in preexisting physical truths: Certain interpretations of quantum theory deny that dynamical properties of physical objects have definite values when unobserved. In some of these interpretations the observer is fundamental, and wave functions are compendia of subjective probabilities, not preexisting elements of physical reality. These two considerations, from evolutionary biology and quantum physics, suggest that current models of object perception require fundamental reformulation. Here we begin such a reformulation, starting with a formal model of consciousness that we call a "conscious agent." We develop the dynamics of interacting conscious agents, and study how the perception of objects and space-time can emerge from such dynamics. We show that one particular object, the quantum free particle, has a wave function that is identical in form to the harmonic functions that characterize the asymptotic dynamics of conscious agents; particles are vibrations not of strings but of interacting conscious agents. This allows us to reinterpret physical properties such as position, momentum, and energy as properties of interacting conscious agents, rather than as preexisting physical truths. We sketch how this approach might extend to the perception of relativistic quantum objects, and to classical objects of macroscopic scale.

  12. Technology Transfer

    Science.gov (United States)

    Smith, Nanette R.

    1995-01-01

    The objective of this summer's work was to attempt to enhance Technology Application Group (TAG) ability to measure the outcomes of its efforts to transfer NASA technology. By reviewing existing literature, by explaining the economic principles involved in evaluating the economic impact of technology transfer, and by investigating the LaRC processes our William & Mary team has been able to lead this important discussion. In reviewing the existing literature, we identified many of the metrics that are currently being used in the area of technology transfer. Learning about the LaRC technology transfer processes and the metrics currently used to track the transfer process enabled us to compare other R&D facilities to LaRC. We discuss and diagram impacts of technology transfer in the short run and the long run. Significantly, it serves as the basis for analysis and provides guidance in thinking about what the measurement objectives ought to be. By focusing on the SBIR Program, valuable information regarding the strengths and weaknesses of this LaRC program are to be gained. A survey was developed to ask probing questions regarding SBIR contractors' experience with the program. Specifically we are interested in finding out whether the SBIR Program is accomplishing its mission, if the SBIR companies are providing the needed innovations specified by NASA and to what extent those innovations have led to commercial success. We also developed a survey to ask COTR's, who are NASA employees acting as technical advisors to the SBIR contractors, the same type of questions, evaluating the successes and problems with the SBIR Program as they see it. This survey was developed to be implemented interactively on computer. It is our hope that the statistical and econometric studies that can be done on the data collected from all of these sources will provide insight regarding the direction to take in developing systematic evaluations of programs like the SBIR Program so that they can

  13. [Medicine and conscientious objection].

    Science.gov (United States)

    Martínez, K

    2007-01-01

    Conscientious objection to democratically accepted laws in democratic societies is a fact, both among citizens and among professionals. Due respect for laws is a prima facie duty in these societies. But democratic justice must at the same time respect peoples' conscience for it constitutes the ethical identity of individuals. And both law and ethics are necessary - although neither of them is sufficient - for its realization. The problem of conscientious objection among healthcare professionals is analysed from this standpoint and the conclusion is that objection is not an absolute right to exemption from several duties, but that the responsibility of the professional and of the institutions towards the citizenry must always be taken into account. Some solutions are suggested that try to protect both the professionals and the citizens in a bi-directional way.

  14. Invariance and Objectivity

    Science.gov (United States)

    Vollmer, Gerhard

    2010-10-01

    Scientific knowledge should not only be true, it should be as objective as possible. It should refer to a reality independent of any subject. What can we use as a criterion of objectivity? Intersubjectivity (i.e., intersubjective understandability and intersubjective testability) is necessary, but not sufficient. Other criteria are: independence of reference system, independence of method, non-conventionality. Is there some common trait? Yes, there is: invariance under some specified transformations. Thus, we say: A proposition is objective only if its truth is invariant against a change in the conditions under which it was formulated. We give illustrations from geometry, perception, neurobiology, relativity theory, and quantum theory. Such an objectivist position has many advantages.

  15. 基于面向对象技术的建筑物震害识别方法研究%Recognition of the Earthquake-damaged Buildings Based on Object-oriented Technology

    Institute of Scientific and Technical Information of China (English)

    董燕生; 潘耀忠; 方伟华; 于德永; 何浩

    2011-01-01

    An M7. 3 strong earthquake occurred in Port-au-Prince, Haiti on Jan. 12, 2010 has destroyed a large number of buildings. From the post-earthquake very high resolution remote sensing image, we can find there are a lot of rubbles around collapsed and partly damaged buildings. Therefore, we take these rubbles as seismic-damage characteristics of the collapsed buildings and use the following three methods-pixel-based method, object-oriented method and object-oriented method combined with geo-statistical texture to extract rubbles automatically. Finally , we assess the accuracy of the three classifications of the remotely-sensed data through the three methods. It turns out that the accuracy of pixel-based method is less than that of object-oriented method. The overall Kappa coefficient and user's precision of rubbles have improved remarkably when adding texture feature. However, there is no obvious improvement of the producer precision of the rubbles.%2010年1月12日海地发生7.3级大地震,造成首都太子港大量建筑物损毁.从震后甚高分辨率遥感影像中可以发现在倒塌和部分倒塌建筑物的周围存在很多瓦砾.因此,可以将瓦砾作为建筑物倒损的震害特征.分别采用基于像元的方法、面向对象的方法、综合地统计学纹理的面向对象方法自动提取建筑物瓦砾,并对3种方法的分类精度进行了评价,研究结果表明:单纯面向对象分类方法的总体分类精度低于基于像元的分类方法;当加入纹理特征后,总体Kappa系数和瓦砾的用广精度明显提高,然而瓦砾的生产者精度的改善并不明显.

  16. Million object spectrograph

    Science.gov (United States)

    Ditto, Thomas D.; Ritter, Joseph M.

    2008-07-01

    A new class of astronomical telescope with a primary objective grating (POG) has been studied as an alternative to mirrors. Nineteenth century POG telescopes suffered from low resolution and ambiguity of overlapping spectra as well as background noise. The present design uses a conventional secondary spectrograph to disambiguate all objects while enjoying a very wide instantaneous field-of-view, up to 40°. The POG competes with mirrors, in part, because diffraction gratings provide the very chromatic dispersion that mirrors defeat. The resulting telescope deals effectively with long-standing restrictions on multiple object spectrographs (MOS). The combination of a POG operating in the first-order, coupled to a spectrographic astronomical telescope, isolates spectra from all objects in the free spectral range of the primary. First disclosed as a concept in year 2002, a physical proof-of-principle is now reported. The miniature laboratory model used a 50 mm plane grating primary and was able to disambiguate between objects appearing at angular resolutions of 55 arcseconds and spectral spacings of 0.15 nm. Astronomical performance is a matter of increasing instrument size. A POG configured according to our specifications has no moving parts during observations and is extensible to any length that can be held flat to tolerances approaching float glass. The resulting telescope could record over one million spectra per night of objects in a line of right ascension. The novel MOS does not require pre-imaging to start acquisition of uncharted star fields. Problems are anticipated in calibration and integration time. We propose means to ameliorate them.

  17. Learning Objects Web

    DEFF Research Database (Denmark)

    Blåbjerg, Niels Jørgen

    2005-01-01

    Learning Objects Web er et DEFF projekt som Aalborg Universitetsbibliotek har initieret. Projektet tager afsæt i de resultater og erfaringer som er opnået med vores tidligere projekt Streaming Webbased Information Modules (SWIM). Vi har et internationalt netværk af interessenter som giver os...... sparring og feedback i forhold til udviklingskoncept både omkring de teoretiske rammer og i forhold til praktisk anvendelse af vores undervisningskoncept. Med disse rygstød og input har vi forfulgt ønsket om at videreudvikle SWIM i det nye projekt Learning Objects Web. Udgivelsesdato: juni...

  18. Objective Eulerian Coherent Structures

    CERN Document Server

    Serra, M

    2015-01-01

    We define objective Eulerian Coherent Structures (OECSs) in two-dimensional, non-autonomous dynamical systems as instantaneously most influential material curves. Specifically, OECSs are stationary curves of the averaged instantaneous material stretching-rate or material shearing-rate functionals. From these objective (frame-invariant) variational principles, we obtain explicit differential equations for hyperbolic, elliptic and parabolic OECSs. As illustration, we compute OECSs in an unsteady ocean velocity data set. In comparison to structures suggested by other common Eulerian diagnostic tools, we find OECSs to be the correct short-term cores of observed trajectory deformation patterns.

  19. Sound Objects for SVG

    OpenAIRE

    Colbrant, Audrey; Lasorsa, Yohan; Lemordant, Jacques; Liodenot, David; Razafimahazo, Mathieu

    2010-01-01

    International audience; A sound object can be defined as a time structure of audio chunks whose duration is on the time scale of 100 ms to several seconds. Sound objects have heterogeneous and time-varying properties. They are the basic elements of any format for Interactive Audio (IA). We have designed an XML language, A2ML, for Interactive Audio which offers, concerning the sequencing of sounds, a level of capabilities similar to that of iXMF, the interactive audio file format defined by th...

  20. Pinocchio: Geppetto's transitional object

    Directory of Open Access Journals (Sweden)

    Gabriele Zeloni

    2015-01-01

    Full Text Available The literature has been considered by Freud and others after him, a form of unaware exploration of mind that can leads to discoveries similar to psychoanalysis’s discoveries. From this perspective, the author puts forward the following hypothesis: Pinocchio is a puppet who comes to life and is therefore, from a child's perception, a transitional object according to Winnicott. Consequently Geppetto is nothing more than the involuntary representation of any child interacting with the transitional object. The author explains the results of the analysis of the text in support of the hypothesis and reflects on the impact of The adventure of Pinocchio on the reader.

  1. Near Earth Objects

    DEFF Research Database (Denmark)

    Wolff, Stefan

    2006-01-01

    , Near Earth Objects: Asteroids and comets following paths that bring them near the Earth. NEOs have collided with the Earth since its formation, some causing local devastation, some causing global climate changes, yet the threat from a collision with a near Earth object has only recently been recognised...... of starlight by the Sun, and therefore directly observe the structure of space-time. This thesis explores several aspects of the observation of NEOs with Gaia, emphasising detection of NEOs and the quality of orbits computed from Gaia observations. The main contribution is the work on motion detection...

  2. Capturing Near Earth Objects

    OpenAIRE

    Baoyin, Hexi; CHEN Yang; Li, Junfeng

    2011-01-01

    Recently, Near Earth Objects (NEOs) have been attracting great attention, and thousands of NEOs have been found to date. This paper examines the NEOs' orbital dynamics using the framework of an accurate solar system model and a Sun-Earth-NEO three-body system when the NEOs are close to Earth to search for NEOs with low-energy orbits. It is possible for such an NEO to be temporarily captured by Earth; its orbit would thereby be changed and it would become an Earth-orbiting object after a small...

  3. Object Management Framework for CAx Information Management

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    As CAD/CAM becomes more and more popular, efficiently managing large amounts of engineering data becomes essential for improving design efficiency and quality. This paper analyses five basic features of product data management and combines them with real industrial examples. Then, an object-oriented product d ata management model is presented. To carry out the model, the paper presents th e architecture of the CAx information management and integration system (CAx-IM IS), and focuses on its core technology, implementation of an object management framework, and discusses the process of realizing the inherent attributes, relat ions, and messages between objects using the object dictionary and storing detai l information about the persistent objects in relation database management syste m (RDBMS). The method provides an effective object management framework for CAx-IMIS.

  4. Design and Implementation of Windows 7 Multi-Touch Objects Plotting Technology%基于win7多点触控的标绘技术设计与实现

    Institute of Scientific and Technical Information of China (English)

    魏丽; 王玉玫; 聂颖

    2015-01-01

    随着触摸技术的普及应用,本文针对标绘系统进行了触摸手势的相关研究,并最终设计实现了支持多点触控的地图标绘系统.手势触控层在手势识别管理器的控制下,识别触控点、常规手势与轨迹手势.触摸标绘层由多点触控管理器负责在标绘系统中进行相关响应.该标绘系统支持十点以内的多点触控标绘,改进了传统桌面系统的交互方式,增强了用户体验.%With the popularization and application of touch technology,this thesis conducted research in plotting system and finally designed and implemented a multi-touch plotting system.The hand-touch layer recognizes touch-points,routine gestures and trackball motions under the control of gesture recognize manager.The multi-touch manager in touch-plotting layer responds to related commands in the plotting system.This plotting system supports multi-touch gestures up to ten touch points while optimizing the interaction of traditional desktop platform and improv-ing user experience.

  5. SIXTH SENSE TECHNOLOGY

    OpenAIRE

    2014-01-01

    The aim of this thesis was to explain the development of the technology by describing current hot concept in its field. The thesis describes the trend of development and current phase of the technology. The trend was described by explaining the concept of sixth sense technology and the effort that have been applied for this technology. As the concept is new, finding the suitable material related to the subject matter was the challenge for this project. The objective was completed by condu...

  6. NASA Astrophysics Technology Needs

    Science.gov (United States)

    Stahl, H. Philip

    2012-01-01

    July 2010, NASA Office of Chief Technologist (OCT) initiated an activity to create and maintain a NASA integrated roadmap for 15 key technology areas which recommend an overall technology investment strategy and prioritize NASA?s technology programs to meet NASA?s strategic goals. Science Instruments, Observatories and Sensor Systems(SIOSS) roadmap addresses technology needs to achieve NASA?s highest priority objectives -- not only for the Science Mission Directorate (SMD), but for all of NASA.

  7. The Language of Objects

    DEFF Research Database (Denmark)

    Eskildsen, Kasper Risbjerg

    2012-01-01

    . The arrangement of artifacts not only helped him formulate his theories, but also allowed him to present his arguments in a language of objects. At the same time, Thomsen's definition of archaeology as a museum science placed his branch of archaeology in a closer relationship with other museum sciences...

  8. Big Java late objects

    CERN Document Server

    Horstmann, Cay S

    2012-01-01

    Big Java: Late Objects is a comprehensive introduction to Java and computer programming, which focuses on the principles of programming, software engineering, and effective learning. It is designed for a two-semester first course in programming for computer science students.

  9. The Road to Objects

    Directory of Open Access Journals (Sweden)

    Graham Harman

    2011-09-01

    Full Text Available Harman presents an outline of how object-oriented ontology (OOO differentiates itself from other branches of speculative realism. Can OOO steer philosophy from an epistemological project that tends to reduce the discipline to "a series of small-time drug busts"?

  10. The Road to Objects

    OpenAIRE

    Graham Harman

    2011-01-01

    Harman presents an outline of how object-oriented ontology (OOO) differentiates itself from other branches of speculative realism. Can OOO steer philosophy from an epistemological project that tends to reduce the discipline to "a series of small-time drug busts"?

  11. Forecasters' Objectives and Strategies

    DEFF Research Database (Denmark)

    Marinovic, Iván; Ottaviani, Marco; Sørensen, Peter Norman

    2013-01-01

    This chapter develops a unified modeling framework for analyzing the strategic behavior of forecasters. The theoretical model encompasses reputational objectives, competition for the best accuracy, and bias. Also drawing from the extensive lit- erature on analysts, we review the empirical evidenc...

  12. Gender Object Identification Test.

    Science.gov (United States)

    Sigmon, Scott B.

    This test was designed primarily for the purpose of assisting social psychologists in researching sex roles and/or sex differences when a nonverbal instrument is desired. The hypothesis was that some objects would be easier for members of one gender to name. The subjects were 30 female and 20 male undergraduate students. Pictures of 65 commercial…

  13. Turning subjective into objective

    DEFF Research Database (Denmark)

    Cardoso, Maria João; Cardoso, Jaime; Amaral, Natália

    2007-01-01

    Twelve expert observers from nine different countries convened in a workshop to evaluate the validity of the Breast Cancer Conservative Treatment. Cosmetic results (BCCT.core) software, an objective method for the aesthetic evaluation of breast cancer conservative treatment. Experts were initiall...

  14. Chronological objects in demographic research

    Directory of Open Access Journals (Sweden)

    Frans J. Willekens

    2013-03-01

    Full Text Available BACKGROUND Calendar time, age and duration are chronological objects. They represent an instant or a time period. Age and duration are usually expressed in units with varying lengths. The number of days in a month or a year depends on the position on the calendar. The units are also not homogeneous and the structure influences measurement. One solution, common in demography, is to use units that are large enough for the results not to be seriously affected by differences in length and structure. Another approach is to take the idiosyncrasy of calendars into account and to work directly with calendar dates. The technology that enables logical and arithmetic operations on dates is available. OBJECTIVE To illustrate logical and arithmetic operations on dates and conversions between time measurements. METHODS Software packages include utilities to process dates. I use existing and a few new utilities in R to illustrate operations on dates and conversions between calendar dates and elapsed time since a reference moment or a reference event. Three demographic applications are presented. The first is the impact of preferences for dates and days on demographic indicators. The second is event history analysis with time-varying covariates. The third is microsimulation of life histories in continuous time. CONCLUSIONS The technology exists to perform operations directly on dates, enabling more precise calculations of duration and elapsed time in demographic analysis. It eliminates the need for (a approximations and (b transformations of dates, such as Century Month Code, that are convenient for computing durations but are a barrier to interpretation. Operations on dates, such as the computation of age, should consider time units of varying length.

  15. Reuse of Learning Objects in Context: Technical and Human Aspects.

    NARCIS (Netherlands)

    Strijker, A.

    2004-01-01

    This dissertation focuses on the application of learning technology standards for learning objects and the differences in reuse in university, corporate, and military contexts. This is addressed from two different perspectives: the technology involving learning objects and the human aspects that

  16. Objectives and Outcomes

    Energy Technology Data Exchange (ETDEWEB)

    Segalman, D.J.

    1998-11-30

    I have recently become involved in the ABET certification process under the new system - ABET 2000. This system relies heavily on concepts of Total Quality Management (TQM). It encourages each institution to define its objectives in terms of its own mission and then create a coherent program based on it. The prescribed steps in setting up the new system at an engineering institution are: o identification of constituencies G definition of mission. It is expected that the department's mission will be consistent with that of the overall institution, but containing some higher resolution language appropriate to that particular discipline of the engineering profession. o statement of objectives consistent with the mission 3G~~\\vED " enumeration of desired, and preferably measurable, outcomes of the process that would ~ `=. verify satisfaction of the objectives. ~~~ 07 !398 o establish performance standards for each outcome. o creation of appropriate feedback loops to assure that the objectives are still consistent with Q$YT1 the mission, that the outcomes remain consistent with the objectives, and that the curriculum and the teaching result in those outcomes. It is my assertion that once the institution verbalizes a mission, enumerated objectives naturally flow from that mission. (We shall try to demonstrate by example.) Further, if the mission uses the word "engineer", one would expect that word also to appear in at least one of the objectives. The objective of producing engineers of any sort must -by decree - involve the presence of the ABET criteria in the outcomes list. In other words, successful satisfaction of the ABET items a-k are a necessary subset of the measure of success in producing engineers. o We shall produce bachelor level engineers whose training in the core topics of chemical (or electrical, or mechanical) engineering is recognized to be among the best in the nation. o We shall provide an opportunity for our students to gain

  17. Observation and Quantum Objectivity

    CERN Document Server

    Healey, Richard

    2012-01-01

    The paradox of Wigner's friend challenges the objectivity of description in quantum theory. A pragmatist interpretation can meet this challenge by judicious appeal to decoherence. On this interpretation, quantum theory provides situated agents with resources for predicting and explaining what happens in the physical world---not conscious observations of it. Even in Wigner's friend scenarios, differently situated agents agree on the objective content of statements about the values of physical magnitudes. In more realistic circumstances quantum Darwinism also permits differently situated agents equal observational access to evaluate their truth. In this view, quantum theory has nothing to say about consciousness or conscious experiences of observers. But it does prompt us to reexamine the significance even of everyday claims about the physical world.

  18. Conscientious objection in Italy.

    Science.gov (United States)

    Minerva, Francesca

    2015-02-01

    The law regulating abortion in Italy gives healthcare practitioners the option to make a conscientious objection to activities that are specific and necessary to an abortive intervention. Conscientious objectors among Italian gynaecologists amount to about 70%. This means that only a few doctors are available to perform abortions, and therefore access to abortion is subject to constraints. In 2012 the International Planned Parenthood Federation European Network (IPPF EN) lodged a complaint against Italy to the European Committee of Social Rights, claiming that the inadequate protection of the right to access abortion implies a violation of the right to health. In this paper I will discuss the Italian situation with respect to conscientious objection to abortion and I will suggest possible solutions to the problem.

  19. DOLIB: Distributed Object Library

    Energy Technology Data Exchange (ETDEWEB)

    D`Azevedo, E.F.; Romine, C.H.

    1994-10-01

    This report describes the use and implementation of DOLIB (Distributed Object Library), a library of routines that emulates global or virtual shared memory on Intel multiprocessor systems. Access to a distributed global array is through explicit calls to gather and scatter. Advantages of using DOLIB include: dynamic allocation and freeing of huge (gigabyte) distributed arrays, both C and FORTRAN callable interfaces, and the ability to mix shared-memory and message-passing programming models for ease of use and optimal performance. DOLIB is independent of language and compiler extensions and requires no special operating system support. DOLIB also supports automatic caching of read-only data for high performance. The virtual shared memory support provided in DOLIB is well suited for implementing Lagrangian particle tracking techniques. We have also used DOLIB to create DONIO (Distributed Object Network I/O Library), which obtains over a 10-fold improvement in disk I/O performance on the Intel Paragon.

  20. Technology development and technology gap among Latin American countries

    OpenAIRE

    Serrano Moya, Edgar David

    2014-01-01

    Objective: to study the source of the technology gaps amongst some Latin American countries and to identify whether a regional system of technological progress may be strengthened. ethodology: technology development within some Latin America countries was researched based on the technology frontier concept. In order to do that, the technological advancement of such countries was compared using standard variables and institutional systems. The concept and scope of the technology frontier, whic...

  1. Spatiotemporal Compression Techniques for Moving Point Objects

    NARCIS (Netherlands)

    Meratnia, N.; de By, R.A.; Bertino, E.

    2004-01-01

    Moving object data handling has received a fair share of attention over recent years in the spatial database community. This is understandable as positioning technology is rapidly making its way into the consumer market, not only through the already ubiquitous cell phone but soon also through small,

  2. Online Risk Prediction for Indoor Moving Objects

    DEFF Research Database (Denmark)

    Ahmed, Tanvir; Pedersen, Torben Bach; Calders, Toon

    2016-01-01

    Technologies such as RFID and Bluetooth have received considerable attention for tracking indoor moving objects. In a time-critical indoor tracking scenario such as airport baggage handling, a bag has to move through a sequence of locations until it is loaded into the aircraft. Inefficiency...

  3. Tactile object exploration using cursor navigation sensors

    DEFF Research Database (Denmark)

    Kraft, Dirk; Bierbaum, Alexander; Kjaergaard, Morten

    2009-01-01

    of this sensor for active haptic exploration. More specifically, we present experiments and results which demonstrate the extraction of relevant object properties such as local shape, weight and elasticity using this technology. Besides its low price due to mass production and its modularity, an interesting...

  4. CanCore: Metadata for Learning Objects

    Directory of Open Access Journals (Sweden)

    Norm Friesen

    2002-10-01

    Full Text Available The vision of reusable digital learning resources or objects, made accessible through coordinated repository architectures and metadata technologies, has gained considerable attention within distance education and training communities. However, the pivotal role of metadata in this vision raises important and longstanding issues about classification, description and meaning. The purpose of this paper is to provide an overview of this vision, focusing specifically on issues of semantics. It will describe the CanCore Learning Object Metadata Application Profile as an important first step in addressing these issues in the context of the discovery, reuse and management of learning resources or objects.

  5. The Commitment Objective

    Institute of Scientific and Technical Information of China (English)

    Milton; Kotler; President

    2007-01-01

    "So,tell me about Action Selling,"Matt said."It starts with Commitment Objectives?""All right,"Joe began,"first you tell me if this sounds familiar:You've made an initial appointment with a great prospect-call him Mr.Wright.You're heard his company has had some problems with its current vendor,and you figure they're ready to make a change.You're pumped.

  6. Projective ambidextrous objects

    CERN Document Server

    Geer, Nathan; Patureau-Mirand, Bertrand

    2011-01-01

    We provide a necessary and sufficient condition for a simple object in a pivotal k-category to be ambidextrous. As a consequence we prove that they exist for factorizable ribbon Hopf algebras, modular representations of finite groups and their quantum doubles, complex and modular Lie (super)algebras, the (1,p) minimal model in conformal field theory, and quantum groups at a root of unity.

  7. Distributed Object Medical Imaging Model

    Directory of Open Access Journals (Sweden)

    Ahmad Shukri Mohd Noor

    2009-09-01

    Full Text Available Digital medical informatics and images are commonly used in hospitals today. Because of the interrelatedness of the radiology department and other departments, especially the intensive care unit and emergency department, the transmission and sharing of medical images has become a critical issue. Our research group has developed a Java-based Distributed Object Medical Imaging Model(DOMIM to facilitate the rapid development and deployment of medical imaging applications in a distributed environment that can be shared and used by related departments and mobile physiciansDOMIM is a unique suite of multimedia telemedicine applications developed for the use by medical related organizations. The applications support realtime patients' data, image files, audio and video diagnosis annotation exchanges. The DOMIM enables joint collaboration between radiologists and physicians while they are at distant geographical locations. The DOMIM environment consists of heterogeneous, autonomous, and legacy resources. The Common Object Request Broker Architecture (CORBA, Java Database Connectivity (JDBC, and Java language provide the capability to combine the DOMIM resources into an integrated, interoperable, and scalable system. The underneath technology, including IDL ORB, Event Service, IIOP JDBC/ODBC, legacy system wrapping and Java implementation are explored. This paper explores a distributed collaborative CORBA/JDBC based framework that will enhance medical information management requirements and development. It encompasses a new paradigm for the delivery of health services that requires process reengineering, cultural changes, as well as organizational changes.

  8. Documentation of Cultural Heritage Objects

    Directory of Open Access Journals (Sweden)

    Jon Grobovšek

    2013-09-01

    Full Text Available EXTENDED ABSTRACT:The first and important phase of documentation of cultural heritage objects is to understand which objects need to be documented. The entire documentation process is determined by the characteristics and scope of the cultural heritage object. The next question to be considered is the expected outcome of the documentation process and the purpose for which it will be used. These two essential guidelines determine each stage of the documentation workflow: the choice of the most appropriate data capturing technology and data processing method, how detailed should the documentation be, what problems may occur, what the expected outcome is, what it will be used for, and the plan for storing data and results. Cultural heritage objects require diverse data capturing and data processing methods. It is important that even the first stages of raw data capturing are oriented towards the applicability of results. The selection of the appropriate working method can facilitate the data processing and the preparation of final documentation. Documentation of paintings requires different data capturing method than documentation of buildings or building areas. The purpose of documentation can also be the preservation of the contemporary cultural heritage to posterity or the basis for future projects and activities on threatened objects. Documentation procedures should be adapted to our needs and capabilities. Captured and unprocessed data are lost unless accompanied by additional analyses and interpretations. Information on tools, procedures and outcomes must be included into documentation. A thorough analysis of unprocessed but accessible documentation, if adequately stored and accompanied by additional information, enables us to gather useful data. In this way it is possible to upgrade the existing documentation and to avoid data duplication or unintentional misleading of users. The documentation should be archived safely and in a way to meet

  9. 拟真世界与客体策略——鲍德里亚的技术决定论及启示%The Simulational World and Objective Strategy --The Technological Determinism of Baudrillard and it's Revelations

    Institute of Scientific and Technical Information of China (English)

    张劲松

    2012-01-01

    The postmodern theory of Baudrillard is a technological determinism, he constructed a simulational world that derived from the model and code, DNA and the binary digital 0/1 is the original of the world. Under the reign of high-technology,subject became creation through technology and lost the richness and diversity. Owing to the powerful of the technology, the realm of object controlled and dominated the human society. Then Baudrillard proposed a passive fatalism, and believed the objective system would develop to perfection and extreme, accordingly im- plode and reverse. Baudrillard's theory is helpful when we reflect the increasingly natural disasters and technological crisis, it also provide a great insight when we rethink the relationship between human and technology.%鲍德里亚的后现代理论是一种典型的技术决定论,他构建了一个由模型、符码所生成的拟真世界,在那里DNA和0/1数字具有了本体论意义。在高科技的世界里,主体失去了丰富而多样的存在,成为技术的创造物和附属物。伴随着主体衰落而产生的是客体的兴盛与强大,客体世界开始控制并主宰着人类社会的运行。鲍德里亚由此提出一种消极的宿命论,即客体系统自身发展到完美、极致,并在顶点上自动内爆、反转。鲍德里亚的理论对于我们反思日益频繁的自然灾害和技术危机、对于重新考量人与自然、技术之间关系提供了有益的启示。

  10. Conscientious objection: a call to nursing leadership.

    Science.gov (United States)

    Ford, Natalie J; Fraser, Kimberly D; Marck, Patricia B

    2010-09-01

    In this paper we argue that nurse leaders need to work actively to create morally supportive environments for nurses in Canada that provide adequate room to exercise conscientious objection. Morally supportive environments engender a safe atmosphere to engage in open dialogue and action regarding conflict of conscience. The CNA's 2008 Code of Ethics for Registered Nurses has recognized the importance of conscientious objection in nursing and has created key guidelines for the registered nurse to follow when a conflict in conscience is being considered or declared. Nurse leaders need to further develop the understanding of conflicts of conscience through education, well-written guidelines for conscientious objection in workplaces and engagement in research to uncover underlying barriers to the enactment of conscientious objections. With advancements in technology, changing healthcare policies and increasing scope of practice, both reflection and dialogue on conscientious objection are critical for the continuing moral development of nurses in Canada.

  11. Extending OLAP Querying to External Object

    DEFF Research Database (Denmark)

    Pedersen, Torben Bach; Shoshani, Arie; Gu, Junmin

    inherent in data in nonstandard applications are not accommodated well by OLAP systems. In contrast, object database systems are built to handle such complexity, but do not support OLAP-type querying well. This paper presents the concepts and techniques underlying a flexible, multi-model federated system...... that enables OLAP users to exploit simultaneously the features of OLAP and object systems. The system allows data to be handled using the most appropriate data model and technology: OLAP systems for dimensional data and object database systems for more complex, general data. Additionally, physical data...... integration can be avoided. As a vehicle for demonstrating the capabilities of the system, a prototypical OLAP language is defined and extended to naturally support queries that involve data in object databases. The language permits selection criteria that reference object data, queries that return...

  12. Object-oriented programming for the biosciences.

    Science.gov (United States)

    Wiechert, W; Joksch, B; Wittig, R; Hartbrich, A; Höner, T; Möllney, M

    1995-10-01

    The development of software systems for the biosciences is always closely connected to experimental practice. Programs must be able to handle the inherent complexity and heterogeneous structure of biological systems in combination with the measuring equipment. Moreover, a high degree of flexibility is required to treat rapidly changing experimental conditions. Object-oriented methodology seems to be well suited for this purpose. It enables an evolutionary approach to software development that still maintains a high degree of modularity. This paper presents experience with object-oriented technology gathered during several years of programming in the fields of bioprocess development and metabolic engineering. It concentrates on the aspects of experimental support, data analysis, interaction and visualization. Several examples are presented and discussed in the general context of the experimental cycle of knowledge acquisition, thus pointing out the benefits and problems of object-oriented technology in the specific application field of the biosciences. Finally, some strategies for future development are described.

  13. War Journalism and 'Objectivity'

    Directory of Open Access Journals (Sweden)

    Annabel McGoldrick

    2006-10-01

    Full Text Available This article opens by considering an apparent paradox. Many professional journalists, working on many media in many countries, consider themselves 'objective'. They do not, at least, set out to skew their coverage of important issues in favour of one side or the other. And yet much of their coverage of conflicts shows a discernible dominant pattern of War Journalism - biased in favour of war. This is not because of a lack of objectivity, the article suggests, but a surfeit. The set of conventions many editors and reporters regard as defining 'objective' journalism arose in response to economic and political conditions which rewarded news that could commend itself as unobjectionable to the maximum number of potential customers. Three of the most important conventions privilege official sources; a dualistic construction of stories and event, over process. Each of these, when applied to the representation of conflicts, leads readers and audiences - or leaves them - to over-value violent, reactive responses and under-value non-violent, developmental responses. Industry conventions sit uneasily alongside equally time-honoured expectations of journalism. These are encoded in rules and regulations governing the content of broadcast news, in many jurisdictions which have a public service concept for radio and television. In some respects, War Journalism can be shown to make it more difficult for broadcast news services to fulfil their public service obligations. Awareness is now growing, of the tension between these two pressures on journalism and its influence on the way pressing public debates are shaped and mediated. More Peace Journalism would help to bring public service news back into line with legitimate public expectations.

  14. Fermions as Topological Objects

    Directory of Open Access Journals (Sweden)

    Yershov V. N.

    2006-01-01

    Full Text Available A preon-based composite model of the fundamental fermions is discussed, in which the fermions are bound states of smaller entities — primitive charges (preons. The preon is regarded as a dislocation in a dual 3-dimensional manifold — a topological object with no properties, save its unit mass and unit charge. It is shown that the dualism of this manifold gives rise to a hierarchy of complex structures resembling by their properties three families of the fundamental fermions. Although just a scheme for building a model of elementary particles, this description yields a quantitative explanation of many observable particle properties, including their masses.

  15. Fermions as topological objects

    CERN Document Server

    Yershov, V N

    2002-01-01

    A conceptual preon-based model of fermions is discussed. The preon is regarded as a topological object with three degrees of freedom in a dual three-dimensional manifold. It is shown that properties of this manifold give rise to a set of preon structures, which resemble three families of fermions. The number of preons in each structure is easily associated with the mass of a fermion. Being just a kind of zero-approximation to a theory of particles and interactions below the quark scale, our model however predicts masses of fermions with an accuracy of about 0.0002% without using any experimental input parameters.

  16. Functional Object Analysis

    DEFF Research Database (Denmark)

    Raket, Lars Lau

    -effect formulations, where the observed functional signal is assumed to consist of both fixed and random functional effects. This thesis takes the initial steps toward the development of likelihood-based methodology for functional objects. We first consider analysis of functional data defined on high......-dimensional Euclidean spaces under the effect of additive spatially correlated effects, and then move on to consider how to include data alignment in the statistical model as a nonlinear effect under additive correlated noise. In both cases, we will give directions on how to generalize the methodology to more complex...

  17. Conscientious Objection to Vaccination.

    Science.gov (United States)

    Clarke, Steve; Giubilini, Alberto; Walker, Mary Jean

    2017-03-01

    Vaccine refusal occurs for a variety of reasons. In this article we examine vaccine refusals that are made on conscientious grounds; that is, for religious, moral, or philosophical reasons. We focus on two questions: first, whether people should be entitled to conscientiously object to vaccination against contagious diseases (either for themselves or for their children); second, if so, to what constraints or requirements should conscientious objection (CO) to vaccination be subject. To address these questions, we consider an analogy between CO to vaccination and CO to military service. We argue that conscientious objectors to vaccination should make an appropriate contribution to society in lieu of being vaccinated. The contribution to be made will depend on the severity of the relevant disease(s), its morbidity, and also the likelihood that vaccine refusal will lead to harm. In particular, the contribution required will depend on whether the rate of CO in a given population threatens herd immunity to the disease in question: for severe or highly contagious diseases, if the population rate of CO becomes high enough to threaten herd immunity, the requirements for CO could become so onerous that CO, though in principle permissible, would be de facto impermissible.

  18. Evolving Objects for Software Engineering

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    This paper is concerned with evolving objects method for softwaredesign that can adapt to the changing environments and requirements automatically. We presen t system architecture with objects library, where there are objects based on dom ain ontologies. We define some genetic operators for objects, and discuss how to apply these genetic operators on objects to get new objects, which can satisfy new requirements.

  19. Selective visual attention in object detection processes

    Science.gov (United States)

    Paletta, Lucas; Goyal, Anurag; Greindl, Christian

    2003-03-01

    Object detection is an enabling technology that plays a key role in many application areas, such as content based media retrieval. Attentive cognitive vision systems are here proposed where the focus of attention is directed towards the most relevant target. The most promising information is interpreted in a sequential process that dynamically makes use of knowledge and that enables spatial reasoning on the local object information. The presented work proposes an innovative application of attention mechanisms for object detection which is most general in its understanding of information and action selection. The attentive detection system uses a cascade of increasingly complex classifiers for the stepwise identification of regions of interest (ROIs) and recursively refined object hypotheses. While the most coarse classifiers are used to determine first approximations on a region of interest in the input image, more complex classifiers are used for more refined ROIs to give more confident estimates. Objects are modelled by local appearance based representations and in terms of posterior distributions of the object samples in eigenspace. The discrimination function to discern between objects is modeled by a radial basis functions (RBF) network that has been compared with alternative networks and been proved consistent and superior to other artifical neural networks for appearance based object recognition. The experiments were led for the automatic detection of brand objects in Formula One broadcasts within the European Commission's cognitive vision project DETECT.

  20. The Objectives of the Egyptian Space Programme

    Science.gov (United States)

    Shaltout, Mosalam

    : The aim of the Egyptsat series is to build on the experience gained from these missions to extend Egypt's space effort into scientific research and to expand its role in educational, agricultural and other development fields. The Egyptian Space Programme envisages that Egypt will be able to join the space age through the gradual establishment of the facilities needed for the manufacture of small research and remote sensing satellites, by acquiring appropriate technological knowledge and capabilities, and by building up the necessary infrastructure to enable the country to design and manufacture its own small satellites. Included in this overall vision would be the capacity to utilize space technologies And applications to serve the national development plans and contribute to the development of scientific and technological research in Egypt, as well as to the establishment of a scientific and research base for advanced industries in Egypt. To hasten the achievement of some or all of these objectives, it will be necessary to: • Transfer advanced space technologies in communication, computers, programs, optics, sensors, new materials, command and control, and energy into the domain of the Egyptian scientific community. • Utilize space technologies and apply these to the country's development plans. • Acquire national capabilities in space technology disciplines. Establish scientific and industrial base in advanced technology fields. • Enhance our human resource capabilities for space sciences fields. • Promote cooperation between the country's research and industrial centres in order to bring about successful project within the national space programme.

  1. Objective perimetry in glaucoma.

    Science.gov (United States)

    Klistorner, A; Graham, S L

    2000-12-01

    Objective perimetry in glaucoma is described using the multifocal pattern visually evoked potential (VEP). A multichannel recording technique was used to improve signal detection in healthy volunteers and assess its ability to detect glaucoma and early changes in patients with suspected glaucoma. Prospective, case-control study. Thirty healthy volunteers, 30 patients with suspected glaucoma, and 30 patients with glaucomatous visual field defects were tested. The VEP was recorded using cortically scaled, multifocal, pseudorandomly alternated pattern stimuli with the VERIS system (Electro-Diagnostic Imaging, Inc., San Francisco, CA). An array of four bipolar occipital electrodes provided four differently oriented channels for simultaneous recording. Signals were compared for different locations within the field up to 26 degrees of eccentricity. Healthy volunteers, patients with suspected glaucoma, and glaucoma patients with established visual field defects were tested, and results were compared with Humphrey visual fields (Humphrey Systems, Dublin, CA) performed on the same day. For reproducibility, five healthy volunteers were each tested on four separate days. The patients with suspected glaucoma and the established glaucoma patients were analyzed for intereye asymmetry of signals, and these data were compared with the asymmetry values of the healthy volunteers. Multiple recording channels significantly enhanced the recording of signals from parts of the visual field not reliably sampled with a single channel technique in all healthy volunteers, particularly along the horizontal meridian (P: < 0.001). Signal amplitude did not decline with age in healthy volunteers. Recordings showed good reproducibility within individuals. In all 30 glaucoma patients, the Humphrey visual field defects were well demonstrated by the VEP, and topographic location was strongly correlated (r(s) = 0.79). Despite large interindividual variations in amplitude, scotomas were well

  2. On the Consortium for Business Object Promotion (CBOP)

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    This paper deals with the goals and visions of a consortium inJapan, named Cons ortium for Business Object Promotion (CBOP), discussing its background, activiti es, and basic technical approaches to share and exchanging various types of Busi ness Objects. Especially, Object Pattern Technologies used in CBOP should be di scussed.

  3. Radiologic Technology Program Standards.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This publication contains statewide standards for the radiologic technology program in Georgia. The standards are divided into 12 categories; Foundations (philosophy, purpose, goals, program objectives, availability, evaluation); Admissions (admission requirements, provisional admission requirements, recruitment, evaluation and planning); Program…

  4. 3D-PRINTING OF BUILD OBJECTS

    Directory of Open Access Journals (Sweden)

    SAVYTSKYI M. V.

    2016-03-01

    Full Text Available Raising of problem. Today, in all spheres of our life we can constate the permanent search for new, modern methods and technologies that meet the principles of sustainable development. New approaches need to be, on the one hand more effective in terms of conservation of exhaustible resources of our planet, have minimal impact on the environment and on the other hand to ensure a higher quality of the final product. Construction is not exception. One of the new promising technology is the technology of 3D -printing of individual structures and buildings in general. 3Dprinting - is the process of real object recreating on the model of 3D. Unlike conventional printer which prints information on a sheet of paper, 3D-printer allows you to display three-dimensional information, i.e. creates certain physical objects. Currently, 3D-printer finds its application in many areas of production: machine building elements, a variety of layouts, interior elements, various items. But due to the fact that this technology is fairly new, it requires the creation of detailed and accurate technologies, efficient equipment and materials, and development of common vocabulary and regulatory framework in this field. Research Aim. The analysis of existing methods of creating physical objects using 3D-printing and the improvement of technology and equipment for the printing of buildings and structures. Conclusion. 3D-printers building is a new generation of equipment for the construction of buildings, structures, and structural elements. A variety of building printing technics opens up wide range of opportunities in the construction industry. At this stage, printers design allows to create low-rise buildings of different configurations with different mortars. The scientific novelty of this work is to develop proposals to improve the thermal insulation properties of constructed 3D-printing objects and technological equipment. The list of key terms and notions of construction

  5. Breaking object correspondence across saccadic eye movements deteriorates object recognition

    Directory of Open Access Journals (Sweden)

    Christian H. Poth

    2015-12-01

    Full Text Available Visual perception is based on information processing during periods of eye fixations that are interrupted by fast saccadic eye movements. The ability to sample and relate information on task-relevant objects across fixations implies that correspondence between presaccadic and postsaccadic objects is established. Postsaccadic object information usually updates and overwrites information on the corresponding presaccadic object. The presaccadic object representation is then lost. In contrast, the presaccadic object is conserved when object correspondence is broken. This helps transsaccadic memory but it may impose attentional costs on object recognition. Therefore, we investigated how breaking object correspondence across the saccade affects postsaccadic object recognition. In Experiment 1, object correspondence was broken by a brief postsaccadic blank screen. Observers made a saccade to a peripheral object which was displaced during the saccade. This object reappeared either immediately after the saccade or after the blank screen. Within the postsaccadic object, a letter was briefly presented (terminated by a mask. Observers reported displacement direction and letter identity in different blocks. Breaking object correspondence by blanking improved displacement identification but deteriorated postsaccadic letter recognition. In Experiment 2, object correspondence was broken by changing the object’s contrast-polarity. There were no object displacements and observers only reported letter identity. Again, breaking object correspondence deteriorated postsaccadic letter recognition. These findings identify transsaccadic object correspondence as a key determinant of object recognition across the saccade. This is in line with the recent hypothesis that breaking object correspondence results in separate representations of presaccadic and postsaccadic objects which then compete for limited attentional processing resources (Schneider, 2013. Postsaccadic

  6. Learning Objects Reusability Effectiveness Metric (LOREM

    Directory of Open Access Journals (Sweden)

    Torky Ibrahim Sultan

    2014-03-01

    Full Text Available In this research we aim to propose an advanced metric to evaluate the effectiveness of learning objects in order to be reused in new contexts. By the way learning objects reusability is achieving economic benefits from educational technology as it saving time and improving quality, but in case of choosing unsuitable learning object it may be less benefit than creating the learning object from scratch. Actually learning objects reusability can facilitate systems development and adaptation. By surveying the current evaluation metrics, we found that while they cover essential aspects, they enables all reviewers of learning objects to evaluate all criteria without paying attention to their roles in creating the learning object which affect their capability to evaluate specific criteria. Our proposed Approach (LOREM is evaluating learning objects based on a group of Aspects which measure their level of effectiveness in order to be reused in other contexts. LOREM classifies reviewers into 3 categories; 1. Academic Group: (Subject Expert Matter “SME” and Instructor. 2. Technical Group: (Instructional Designer “ID”, LO Developer and LO Designer. 3. Students group. The authorization of reviewers in these several categories are differentiated according to reviewer's type, e.g., (Instructor, LO Developer and their area of expert (their expertise subjects for academic and students reviewers.

  7. Evidence toward an expanded international civil aviation organization (ICAO) concept of a single unified global communication navigation surveillance air traffic management (CNS/ATM) system: A quantitative analysis of ADS-B technology within a CNS/ATM system

    Science.gov (United States)

    Gardner, Gregory S.

    This research dissertation summarizes research done on the topic of global air traffic control, to include technology, controlling world organizations and economic considerations. The International Civil Aviation Organization (ICAO) proposed communication, navigation, surveillance, air traffic management system (CNS/ATM) plan is the basis for the development of a single global CNS/ATM system concept as it is discussed within this study. Research will be evaluated on the efficacy of a single technology, Automatic Dependent Surveillance-Broadcast (ADS-B) within the scope of a single global CNS/ATM system concept. ADS-B has been used within the Federal Aviation Administration's (FAA) Capstone program for evaluation since the year 2000. The efficacy of ADS-B was measured solely by using National Transportation Safety Board (NTSB) data relating to accident and incident rates within the Alaskan airspace (AK) and that of the national airspace system (NAS).

  8. [Abortion and conscientious objection].

    Science.gov (United States)

    Czarkowski, Marek

    2015-03-01

    Polish laws specify the parties responsible for lawful medical care in the availability of abortion differently than the Resolution of the Council of Europe. According to Polish regulations they include all Polish doctors while according to the Resolution, the state. Polish rules should not discriminate against anyone in connection with his religion or belief, even more so because the issue of abortion is an example of an unresolved ethical dispute. The number of lawful abortion in Poland does not exceed 1000 per year and can be carried out by only a few specialists contracted by the National Health Fund. Sufficient information and assistance should be provided to all pregnant women by the National Health Fund. The participation of all physicians in the informing process is not necessary, as evidenced by the lack of complaints to provide information on where in vitro fertilization treatment can be found - until recently only available when paid for by the individual and performed in much larger numbers than abortion. Entities performing this paid procedure made sure to provide information on their own. The rejection of the right to the conscientious objection clause by negating the right to refuse information may lead some to give up the profession or cause the termination of certain professionals on the basis of the professed worldview. Meanwhile, doctors are not allowed to be discriminated against on the basis of their conscience or religion.

  9. Data quality objectives

    Energy Technology Data Exchange (ETDEWEB)

    Haeberer, F. [Environmental Protection Agency, Washington, DC (United States)

    1993-12-31

    The U.S. Environmental Protection Agency (EPA) spends about $500 million annually in collecting environmental data for scientific research and regulatory decision making. In addition, the regulated community may spend as much as ten times more each year in responding to EPA compliance requirements. Among the EPA and the regulated community there are several important common concerns: both want to make informed decisions using the right type, quality, and quantity of data. Collecting new data is very resource intensive to all parties. Neither EPA nor the regulated community can afford to collect more or {open_quotes}better{close_quotes} data than are really needed; the Data Quality Objectives (DQO) process is a systematic planning tool for ensuring that the right data will be collected for arriving at a decision within the desired confidence constraints. Using the DQO process to plan environmental data collections can help improve their effectiveness and efficiency, and enhance the defensibility of the decisions for which the data are used.

  10. [Hemodialysis with biological object].

    Science.gov (United States)

    Eventov, V L; Maksimenko, V A; Zhidkov, I L; Andrianova, M Iu

    2005-01-01

    The essence of the method of biodialysis (hemodialysis with biological object) developed and suggested by the authors for clinical use consists in that the healthy organism exerts, through a system of mass transfer, a therapeutic action on the sick organism. Blood from the affected and healthy organisms is perfused through individual mass exchangers (dialyzers, hemodiafilters and hemofilters), which are hydraulically connected by a circulating transport medium. Metabolites that accumulate in blood of the affected organism diffuse into the transport medium and, from there, into blood of the healthy organism, which metabolizes them. The reverse process occurs simultaneously: substances, whose concentration in blood of the sick organism is less versus the healthy organism, diffuse from blood of the healthy organism to blood of patient. The method suggested by us can be used in clinical practice for normalizing a variety of parameters in patients with hepatic and renal insufficiency. Besides, a number of substances can be transferred from the healthy donor to patient in the process of biodialysis, which opens promising potentialities for the treatment of many diseases.

  11. Information Technology Resources Assessment

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    The Information Technology Resources Assessment (ITRA) is being published as a companion document to the Department of Energy (DOE) FY 1994--FY 1998 Information Resources Management Long-Range Plan. This document represents a collaborative effort between the Office of Information Resources Management and the Office of Energy Research that was undertaken to achieve, in part, the Technology Strategic Objective of IRM Vision 21. An integral part of this objective, technology forecasting provides an understanding of the information technology horizon and presents a perspective and focus on technologies of particular interest to DOE program activities. Specifically, this document provides site planners with an overview of the status and use of new information technology for their planning consideration.

  12. New Scattered Disk Object and Centaur Colors

    Science.gov (United States)

    Brucker, Melissa; Wilcox, P.; Stansberry, J.

    2013-10-01

    We report B, V, and R magnitudes for scattered disk objects and centaurs from observations taken in December 2011 and August 2013 using the Lowell Observatory Perkins Telescope with PRISM and observations taken in March 2012 at the Vatican Advanced Technology Telescope (VATT) on Mt. Graham, Arizona. Targeted scattered disk objects include 2002 CY224, 2003 UY117, 2006 QJ181, 2008 CT190, 2009 YG19, 2010 FD49, 2010 VZ98. Targeted centaurs include 2002 QX47, 2005 UJ438, 2006 UX184, and 2007 RH283. We will determine if the resultant centaur colors follow the bimodal distribution (B-R either red or gray) previously detected. We will also compare the resultant scattered disk object colors to those published for other scattered disk objects. This work is based on observations with the Perkins Telescope at Lowell Observatory, and with the VATT: The Alice P. Lennon Telescope and the Thomas J. Bannan Astrophysics Facility.

  13. Object Markers in Ikalanga

    Directory of Open Access Journals (Sweden)

    Rose Letsholo

    2013-01-01

    Full Text Available There is an on-going debate amongst linguists regarding the status of the object marker (OM. Some scholars argue that OMs are agreement morphology (Baker 2010, Riedel 2009 while others argue that OMs are pronominal and not agreement morphology (Nevins 2010, Kramer, under review, Labelle 2007, Demuth and Johnson 1990, Mchombo 2002. The purpose of this paper is to contribute to this debate using data from Ikalanga to support the view that OMs are pronominal clitics. I discuss evidence in favor of the agreement analysis as well as that in favor of the pronominal analysis. OMs in Ikalanga behave like agreement morphology in that they attach only to the verbal stem, only one OM occurs in a clause, and they share grammatical features (person, gender and number with the lexical NP with which they co-refer. However, there are many ways in which OMs behave like pronominals. For example, OMs do not vary in form according to the mood of a sentence or negation while subject markers, which I analyze as agreement morphemes do. They are not obligatory in Ikalanga sentences while subject markers are. OMs are not subject to locality constraints while agreement is. They can be bound by the subject (backward pronominalization, something unexpected of agreement and there is ample evidence to show that the lexical NP with which the OM co-refers is an adjunct, a fact which has been used in the literature to argue that the OM is pronominal in such a set up. The evidence in favor of the pronominal analysis however, is more compelling and therefore I conclude that OMs are pronominal clitics and not agreement morphology.

  14. New graphene technologies of manipulation with molecular objects

    Science.gov (United States)

    Glukhova, O. E.; Savost'yanov, G. V.; Slepchenkov, M. M.; Shunaev, V. V.

    2016-06-01

    A new technique of manipulating with fullerene C60 over graphene on a SiO2 substrate is proposed. To stop the chaotic motion of molecules and limit its range, it is suggested to use a corrugated substrate. The study has shown that, at the corrugation wavelength of 3.4 nm and depth of 1.6 nm, the fullerene motion becomes directed with a deviation within 0.5 nm. The fullerene motion becomes even more definite, with a deviation from a straight line within tenths of an angstrom by the action of an external electric field, which allows one to manipulate the motion along the bottom of a groove. The method proposed can serve as a basis for the controlled assembly of molecules to supermolecular structures of given configurations, which can be applied in bio- and nanoelectronics.

  15. Multiple objectives application approach to waste minimization

    Institute of Scientific and Technical Information of China (English)

    张清宇

    2002-01-01

    Besides econormics and controllability, waste minimization has now become an objective in designing chemical processes,and usually leads to high costs of investment and operation.An attempt was mede to minimize waste discharged from chemical reaction processes during the design and modification process while the operation conditions were also optimized to meet the requirements of technology and economics.Multiob-jectives decision nonlinear programming(NLP) was emplyed optimize the operation conditions of a chemical reaction process and reduce waste. A modeling package-SPEEDUP was used to simulate the process.This paper presents a case study of the benzenc production process.The flowsheer factors affecting the economics and waste generation were examined.Constraints were imposed to reduce the number of objectives and carry out optimal calculations easily.After comparisons of all possiblle solutions,best-compromise approach was applied to meet technological requirements and minimize waste.

  16. Use of Self-to-Object and Object-to-Object Spatial Relations in Locomotion

    Science.gov (United States)

    Xiao, Chengli; Mou, Weimin; McNamara, Timothy P.

    2009-01-01

    In 8 experiments, the authors examined the use of representations of self-to-object or object-to-object spatial relations during locomotion. Participants learned geometrically regular or irregular layouts of objects while standing at the edge or in the middle and then pointed to objects while blindfolded in 3 conditions: before turning (baseline),…

  17. Cooperative Object Transportation With Multiple Humanoid Robots

    OpenAIRE

    呉, 孟鴻

    2015-01-01

    There are more and more robots appearing in factory or our daily life due to development of recent technology. Among all types of robots, humanoid robots have the potential to perform multiple tasks and walk on uneven terrain like human beings. Hence, it is expected that humanoid robots work instead of human beings at dangerous zones such as plant facilities. In such dangerous zones, humanoid robots must cooperate with each other in order to carry heavy and large objects. Although there is...

  18. THE SUCCESSION OF DATA WAREHOUSE USING OBJECT ORIENTED APPROACH

    Directory of Open Access Journals (Sweden)

    DR. PUSHPA SURI

    2011-02-01

    Full Text Available This paper describes techniques for designing both front & back end of a data warehouse in such a way that companies can continue to progress their warehouse and query tools as their business changes,customer demands changes, instead of continuously having to estructure and rewrite their existing tools. Object –Oriented approach are driving the current development of ODBMS that will handle complex objects, inheritance and other features that enable direct implementation technology that is being extended to combine data management capabilities with application of logical rules to provide more refined information to management. Object-oriented approach is used in different areas i.e Software Engg, Database Management System and Latest Approach is used in Data warehouse. Object-Oriented envelopment involves more than learning a program, it includes capability for development. A purely Object –Oriented tool like Java, Smalltalk , or the object –oriented use of C++ requires that problem domains be conceptualized in terms of the paradigm inherent in object technology. Most research in Object-oriented programming (OOP including object –oriented database Management systems (OODBMS, is concerned with supporting users which are not served well by more conventional technology. Our research has been from a different point of view – our primary motivating factor is toshow how existing applications can be enhanced using object –oriented Technology.

  19. Technologies as incarnated action

    DEFF Research Database (Denmark)

    Schraube, Ernst

    Contemporary conceptualizations of technology go beyond the traditional interpretation of created things as simply neutral means to an end. They theorize technologies as objects, which embody regimes of power (the theory of technological politics), or scripts (actor-network theory), or values...... (critical theory of technology), or patriarchal thought structures (feminist theories of technology). As helpful as these theories may be to understand the inner relationship between the technosphere and human life, the way in which the life of the individuals in the world of things is imagined remains...... vague and imprecise. In this paper I will argue for a social theory of technology, which includes the subjective and intersubjective implications of technological artifacts. I will show how acting has shifted from the province of human subjects to the sphere of work and products. The created things now...

  20. Introducing Object-Oriented Programming

    DEFF Research Database (Denmark)

    Caspersen, Michael Edelgaard

    2008-01-01

    The practice of teaching programming at universities, colleges and high schools went through a major change roughly in the mid 1990s: The teaching of objectorientation in introductory courses slowly became mainstream. Fairly soon, the Object First or Objects Early school of thought was formulated......, stating that teaching object orientation by discussing objects from the very start is a good thing....

  1. Learning object for teacher training aimed to develop communication skills

    Directory of Open Access Journals (Sweden)

    Norma Esmeralda RODRÍGUEZ RAMÍREZ

    2014-06-01

    Full Text Available This article presents the results and reflections obtained across a research aimed to analyze the quality criteria of an opened learning object oriented to develop communication skills in order to be able to report and validate it according to its content, pedagogic structure, technological structure, graphical and textual language and usability to teacher training, in order to base it theoretically, pedagogically and technologically. The research question was: Which are the quality criteria that a learning object aimed to develop communication skills must cover? Under a quantitative approach, there were electronic questionnaires applied to: 34 Technological University teachers, eight experts about of communicative competence, teaching, technology and graphic design. The results indicated that some of the quality criteria of learning object are: the effective managing of the learning content, the balanced composition of his pedagogic structure, the technological structure efficiency and the proper managing of graphical and textual language.

  2. Challenges of conservation: working objects

    Directory of Open Access Journals (Sweden)

    Professor Elizabeth Pye

    2016-11-01

    Full Text Available This paper discusses the concepts and practice of museum conservation, and the role of conservation in preserving both material and significance of objects. It explores the conservation of science and industry collections and the fact that the significance of many of these objects lies in their operation. It considers alternatives to operating original objects but emphasises the value of experiencing the real thing, and argues that visitors should be given greater physical access to museum objects, including being enabled to handle and work functioning objects. It finishes by calling for research into the effects of operation on the objects themselves, and into what constitutes a satisfying experience of working objects.

  3. Visual object recognition and tracking

    Science.gov (United States)

    Chang, Chu-Yin (Inventor); English, James D. (Inventor); Tardella, Neil M. (Inventor)

    2010-01-01

    This invention describes a method for identifying and tracking an object from two-dimensional data pictorially representing said object by an object-tracking system through processing said two-dimensional data using at least one tracker-identifier belonging to the object-tracking system for providing an output signal containing: a) a type of the object, and/or b) a position or an orientation of the object in three-dimensions, and/or c) an articulation or a shape change of said object in said three dimensions.

  4. An object-oriented network-transparent data transportation framework

    Science.gov (United States)

    Steinbeck, T. M.; Lindenstruth, V.; Schulz, M. W.

    2002-04-01

    An object-oriented data transportation framework based upon the publisher-subscriber (producer-consumer) principle has been developed that transparently incorporates a network transport mechanism independently of the underlying network technology and protocol.

  5. Impact of Prior Knowledge of Behavioural Objectives on Students ...

    African Journals Online (AJOL)

    Impact of Prior Knowledge of Behavioural Objectives on Students' Academic ... AFRREV STECH: An International Journal of Science and Technology ... significant difference in achievement between male and female students with the females ...

  6. Object manipulation facilitates kind-based object individuation of shape-similar objects

    DEFF Research Database (Denmark)

    Kingo, Osman Skjold; Krøjgaard, Peter

    2011-01-01

    Five experiments investigated the importance of shape and object manipulation when 12-month-olds were given the task of individuating objects representing exemplars of kinds in an event-mapping design. In Experiments 1 and 2, results of the study from Xu, Carey, and Quint (2004, Experiment 4) were......, Experiment 4 revealed that allowing infants to manipulate objects shortly before the individuation task enabled them to individuate shape-similar objects from different categories. In Experiment 5, allowing object manipulation did not induce infants to individuate natural-looking objects from the same...... category. These findings suggest that object manipulation facilitates kind-based individuation of shape-similar objects by 12-month-olds. Keywords: Object individuation; Object shape; Object manipulation; Kind representations; Infancy...

  7. Computer Science and Technology Board

    Energy Technology Data Exchange (ETDEWEB)

    Blumenthal, M.S.

    1990-01-01

    The Computer Science and Technology Board (CSTB) meets three times a year to consider scientific and policy issues in computer science as well as relevant problems in associated technologies. The objectives of the Board include: initiating studies involving computer science and technology as a critical national resource; responding to requests from the government, nonprofit foundations, and industry for advice on computer science and technology; promoting the health of the technology and other fields of pure and applied science and technology; and providing a base of expertise within the NRC in the area of computer science and technology.

  8. Object-Interviews: Folding, Unfolding, and Refolding Perceptions of Objects

    Directory of Open Access Journals (Sweden)

    Susan Naomi Nordstrom PhD

    2013-02-01

    Full Text Available This article describes the object-interview as a Deleuzian space in which subjects and objects, living and nonliving, entangle together. I developed the object-interview to understand the connections that 11 Midwestern family history genealogists made between objects (e.g., documents, photographs, and other artifacts and their ancestors. The object-interview suggests an alternative way to think and do qualitative interviews informed by poststructural theories. The method draws on French philosopher Deleuze's concepts of the fold, events, and a life, as well as conventional qualitative interview literature. Deleuze's concepts offer a way to rethink objects and subjects as fibrous, connective, and folding entities in qualitative interviews. Such a rethinking offers an alternative to subject-centered conventional qualitative interviews in which subjects are teased apart from objects and subjects primarily produce knowledge. The object-interview, then, is a Deleuzian space in which the supposed distinctions between subjects and objects, as well as other binary divisions, become indistinct, or entangled, as both subjects and objects produce knowledge. That space enabled me to create the concept ensemble of life—a constantly shifting group of objects associated with a person's life. In this article, I describe the theoretical entanglement of the object-interview, the object-interview itself, the data it produced in my dissertation study, and the significance of the method to the field of qualitative research methods.

  9. Adobe Boxes: Locating Object Proposals Using Object Adobes.

    Science.gov (United States)

    Fang, Zhiwen; Cao, Zhiguo; Xiao, Yang; Zhu, Lei; Yuan, Junsong

    2016-09-01

    Despite the previous efforts of object proposals, the detection rates of the existing approaches are still not satisfactory enough. To address this, we propose Adobe Boxes to efficiently locate the potential objects with fewer proposals, in terms of searching the object adobes that are the salient object parts easy to be perceived. Because of the visual difference between the object and its surroundings, an object adobe obtained from the local region has a high probability to be a part of an object, which is capable of depicting the locative information of the proto-object. Our approach comprises of three main procedures. First, the coarse object proposals are acquired by employing randomly sampled windows. Then, based on local-contrast analysis, the object adobes are identified within the enlarged bounding boxes that correspond to the coarse proposals. The final object proposals are obtained by converging the bounding boxes to tightly surround the object adobes. Meanwhile, our object adobes can also refine the detection rate of most state-of-the-art methods as a refinement approach. The extensive experiments on four challenging datasets (PASCAL VOC2007, VOC2010, VOC2012, and ILSVRC2014) demonstrate that the detection rate of our approach generally outperforms the state-of-the-art methods, especially with relatively small number of proposals. The average time consumed on one image is about 48 ms, which nearly meets the real-time requirement.

  10. Transparent Persistence with Java Data Objects

    CERN Document Server

    Hrivnác, J

    2003-01-01

    Flexible and performant Persistency Service is a necessary component of any HEP Software Framework. The building of a modular, non-intrusive and performant persistency component have been shown to be very difficult task. In the past, it was very often necessary to sacrifice modularity to achieve acceptable performance. This resulted in the strong dependency of the overall Frameworks on their Persistency subsystems. Recent development in software technology has made possible to build a Persistency Service which can be transparently used from other Frameworks. Such Service doesn't force a strong architectural constraints on the overall Framework Architecture, while satisfying high performance requirements. Java Data Object standard (JDO) has been already implemented for almost all major databases. It provides truly transparent persistency for any Java object (both internal and external). Objects in other languages can be handled via transparent proxies. Being only a thin layer on top of a used database, JDO doe...

  11. Object-oriented framework for distributed simulation

    Science.gov (United States)

    Hunter, Julia; Carson, John A.; Colley, Martin; Standeven, John; Callaghan, Victor

    1999-06-01

    The benefits of object-oriented technology are widely recognized in software engineering. This paper describes the use of the object-oriented paradigm to create distributed simulations. The University of Essex Robotics and Intelligent Machines group has been carrying out research into distributed vehicle simulation since 1992. Part of this research has focused on the development of simulation systems to assist in the design of robotic vehicles. This paper describes the evolution of these systems, from an early toolkit used for teaching robotics to recent work on using simulation as a design tool in the creation of a new generation of unmanned underwater vehicles. It outlines experiences gained in using PVM, and ongoing research into the use of the emerging High Level Architecture as the basis for these frameworks. The paper concludes with the perceived benefits of adopting object-oriented methodologies as the basis for simulation frameworks.

  12. OAI Object Re-Use and Exchange

    CERN Document Server

    CERN. Geneva; Jacobs, Neil

    2007-01-01

    YouTube, Flickr, del.icio.us, blogs, message boards and other "Web 2.0" related technologies are indicative of the contemporary web experience. There is a growing interest in appropriating these tools and modalities to support the scholarly communication process. This begins with leveraging the intrinsic value of scholarly digital objects beyond the borders of the hosting repository. There are numerous examples of the need to re-use objects across repositories in scholarly communication. These include citation, preservation, virtual collections of distributed objects, and the progression of units of scholarly communication through the registration-certification-awareness-archiving chain. The last several years have brought about numerous open source repository systems and their associated communities. The Open Archives Initiative Protocol for Metadata Harvesting (OAI-PMH) has been the initial catalyst for repository interoperability. However, there is now a rising interest in repositories no longer being stat...

  13. Object Replication and CORBA Fault-Tolerant Object Service

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    CORBA (Common Object Request Broker Arc hitecture) provides 16Common Object Services for distributed application develo pment, but none of them are fault-tolerance related services. In this paper, we propose a replicated object based Fault-Tolerant Object Service (FTOS) for COR BA environment. Two fault-tolerant mechanisms are provided in FTOS including dy namic voting mechanism and object replication mechanism. The dynamic voting mech anism uses majority-voting strategy to ensure object state consistency in failu re situations. The object replication mechanism can help system administrators t o replicate and start-up objects easily. Our implementation provides a library according to the style of COSS. With this library, programmers can develop distr ibuted applications with fault-tolerance capability very easily.

  14. Probabilistic object and viewpoint models for active object recognition

    CSIR Research Space (South Africa)

    Govender, N

    2013-09-01

    Full Text Available For mobile robots to perform certain tasks in human environments, fast and accurate object verification and recognition is essential. Bayesian approaches to active object recognition have proved effective in a number of cases, allowing information...

  15. Radiation danger of exclusion zone objects

    Energy Technology Data Exchange (ETDEWEB)

    Kholosha, V.I.; Proskura, N.I.; Ivanov, Yu.A.; Kazakov, S.V.; Arkhipov, A.N. [Ministry of Ukraine of Emergencies and Affairs of Population Protection from the Consequences of Chornobyl Catastrophe (Ukraine)

    2001-03-01

    The analysis of radiation danger of the Exclusion Zone objects was made. Here, the Zone is defined as the territory from which the population has been evacuated in 1986 owing to the Chernobyl accident and possible outflow of the contaminated substances out of the borders is potentially dangerous to the Ukraine. In the present work were analyzed such problems as sources of radiation danger in the Zone, ways of radionuclide migration out of the borders of the Zone in normal and emergency situations, the non-radiation (ecological) danger factors of the Zone objects, doses (individual and collective) from various sources and on separate ways of their formation, and the characteristics of radiation danger of the Zone objects. The conclusions are: (1) Radionuclide flows both from technologic and natural sources exceed those from Shelter objects, (2) Under emergency conditions, radionuclide flows and doze loading remain comparable with those from emergency sources, (3) To solve some management tasks in radiation situation, the basic works on the Shelter objects should be oriented to decrease probability of emergency occurrence and to reduce radiation influence (prevention wash-outs during high waters, fire-prevention measures in forests and strengthening of the control behind non-authorized use of objects in the Zone). (S. Ohno)

  16. The Power of Objectives: Moving beyond Learning Objectives

    Science.gov (United States)

    Phillips, Jack J.; Phillips, Patti P.

    2010-01-01

    Although the need for project objectives is obvious, their value and role are much broader than most think. In this article, we explore the need for higher levels of objectives, along with tips and techniques to develop them properly. More important, we examine the benefits of objectives from many perspectives. In today's competitive environment,…

  17. Young Children's Self-Generated Object Views and Object Recognition

    Science.gov (United States)

    James, Karin H.; Jones, Susan S.; Smith, Linda B.; Swain, Shelley N.

    2014-01-01

    Two important and related developments in children between 18 and 24 months of age are the rapid expansion of object name vocabularies and the emergence of an ability to recognize objects from sparse representations of their geometric shapes. In the same period, children also begin to show a preference for planar views (i.e., views of objects held…

  18. Incineration technologies

    CERN Document Server

    Buekens, Alfons

    2013-01-01

    Waste incineration is the art of completely combusting waste, while maintaining or reducing emission levels below current emission standards. Where possible, objectives include the recovering of energy as well as the  combustion residues.  Successful waste incineration makes it possible to achieve a deep reduction in waste volume, obtain a compact and sterile residue, and eliminate a wide array of pollutants. This book places waste incineration within the wider context of waste management, and demonstrates that, in contrast to landfills and composting, waste incineration can eliminate objectionable and hazardous properties such as flammability and toxicity, result in a significant reduction in volume, and destroy gaseous and liquid waste streams leaving little or no residues beyond those linked to flue gas neutralization and treatment. Moreover, waste incineration sterilizes and destroys putrescible matter, and produces usable heat.  Incineration Technologies first appeared as a peer-reviewed contribution ...

  19. Space Archaeology: Attribute, Object, Task and Method

    Science.gov (United States)

    Wang, Xinyuan; Guo, Huadong; Luo, Lei; Liu, Chuansheng

    2017-04-01

    Archaeology takes the material remains of human activity as the research object, and uses those fragmentary remains to reconstruct the humanistic and natural environment in different historical periods. Space Archaeology is a new branch of the Archaeology. Its study object is the humanistic-natural complex including the remains of human activities and living environments on the earth surface. The research method, space information technologies applied to this complex, is an innovative process concerning archaeological information acquisition, interpretation and reconstruction, and to achieve the 3-D dynamic reconstruction of cultural heritages by constructing the digital cultural-heritage sphere. Space archaeology's attribute is highly interdisciplinary linking several areas of natural and social and humanities. Its task is to reveal the history, characteristics, and patterns of human activities in the past, as well as to understand the evolutionary processes guiding the relationship between human and their environment. This paper summarizes six important aspects of space archaeology and five crucial recommendations for the establishment and development of this new discipline. The six important aspects are: (1) technologies and methods for non-destructive detection of archaeological sites; (2) space technologies for the protection and monitoring of cultural heritages; (3) digital environmental reconstruction of archaeological sites; (4) spatial data storage and data mining of cultural heritages; (5) virtual archaeology, digital reproduction and public information and presentation system; and (6) the construction of scientific platform of digital cultural-heritage sphere. The five key recommendations for establishing the discipline of Space Archaeology are: (1) encouraging the full integration of the strengths of both archaeology and museology with space technology to promote the development of space technologies' application for cultural heritages; (2) a new

  20. Visuo-haptic integration in object identification using novel objects.

    Science.gov (United States)

    Desmarais, Geneviève; Meade, Melissa; Wells, Taylor; Nadeau, Mélanie

    2017-07-25

    Although some studies have shown that haptic and visual identification seem to rely on similar processes, few studies have directly compared the two. We investigated haptic and visual object identification by asking participants to learn to recognize (Experiments 1, and 3), or to match (Experiment 2) novel objects that varied only in shape. Participants explored objects haptically, visually, or bimodally, and were then asked to identify objects haptically and/or visually. We demonstrated that patterns of identification errors were similar across identification modality, independently of learning and testing condition, suggesting that the haptic and visual representations in memory were similar. We also demonstrated that identification performance depended on both learning and testing conditions: visual identification surpassed haptic identification only when participants explored the objects visually or bimodally. When participants explored the objects haptically, haptic and visual identification were equivalent. Interestingly, when participants were simultaneously presented with two objects (one was presented haptically, and one was presented visually), object similarity only influenced performance when participants were asked to indicate whether the two objects were the same, or when participants had learned about the objects visually-without any haptic input. The results suggest that haptic and visual object representations rely on similar processes, that they may be shared, and that visual processing may not always lead to the best performance.

  1. Minimum Delay Moving Object Detection

    KAUST Repository

    Lao, Dong

    2017-01-08

    We present a general framework and method for detection of an object in a video based on apparent motion. The object moves relative to background motion at some unknown time in the video, and the goal is to detect and segment the object as soon it moves in an online manner. Due to unreliability of motion between frames, more than two frames are needed to reliably detect the object. Our method is designed to detect the object(s) with minimum delay, i.e., frames after the object moves, constraining the false alarms. Experiments on a new extensive dataset for moving object detection show that our method achieves less delay for all false alarm constraints than existing state-of-the-art.

  2. Object Identity in Database Systems

    Institute of Scientific and Technical Information of China (English)

    李天柱

    1995-01-01

    The concept of object identity and implementation of object identity in some systems have been explained in literature.Based on an analysis on the idea of data scheme in ANSI/X3/SPARC,this paper presents the concept of full-identity,which includes entity identity,conceptual object identity,and internal object identity,In addition,the equality of objects,which is richer and more practical,is discussed based on the full identity of objects.Therefore,the semantics and constructions of the identity for the complex objects are fully observed,and some appliactions in object management,version management,and user interface are found.Also,it could support the combination of O-O model with V-O model.

  3. Multidisciplinary Optimization Object Library Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The development of a library of Common MDO Objects is proposed, in which the software objects will automate a variety of recurring problems in the development of MDO...

  4. Multidisciplinary Optimization Object Library Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The development of a library of Common MDO Objects is proposed, in which the software objects will automate a variety of recurring problems in the development of MDO...

  5. Objects as Temporary Autonomous Zones

    Directory of Open Access Journals (Sweden)

    Tim Morton

    2011-09-01

    Full Text Available From Hakim Bey's instructions on creating temporary autonomous zones we see an oscillation "between performance art and politics, circus clowning and revolution." In this essay Tim Morton discusses anarchist politics as, "the creation of fresh objects in a reality without a top or a bottom object, or for that matter a middle object."

  6. Objects as Temporary Autonomous Zones

    OpenAIRE

    Tim Morton

    2011-01-01

    From Hakim Bey's instructions on creating temporary autonomous zones we see an oscillation "between performance art and politics, circus clowning and revolution." In this essay Tim Morton discusses anarchist politics as, "the creation of fresh objects in a reality without a top or a bottom object, or for that matter a middle object."

  7. The Use of Educational Objects

    Science.gov (United States)

    Stearns, Clio

    2016-01-01

    This conceptual paper looks at the Winnicottian notion of object use as it relates to education. Object use is understood as the process of attaching to but then attempting to destroy the educator in an effort to create new knowledge and relationships. The paper argues for educational object use as a way of understanding and normalising resistance…

  8. Creating the First SCORM Object

    Science.gov (United States)

    Gonzalez-Barbone, Victor; Anido-Rifon, Luis

    2008-01-01

    The creation of the first SCORM (Shareable Content Object Reference Model) object offers some challenges and difficulties which go beyond the facilities offered by content generation applications. In particular, the creation of really reusable, searchable learning objects requires a detailed consideration of metadata, where some institutional…

  9. Complex perspectives on learning objectives

    DEFF Research Database (Denmark)

    Mørcke, Anne Mette; Wichmann-Hansen, Gitte; Guldbrand Nielsen, Dorte

    2006-01-01

    opposite perspectives: objectives as context-free theory-based rules versus objectives as personal practice-based guidelines. The students favoured theory-based objectives, which should be defined by experts conclusively as minimum levels and checklists. The senior doctors preferred practice...

  10. Clustering objects from multiple collections

    NARCIS (Netherlands)

    Hollink, V.; van Someren, M.; de Boer, V.

    2009-01-01

    Clustering methods cluster objects on the basis of a similarity measure between the objects. In clustering tasks where the objects come from more than one collection often part of the similarity results from features that are related to the collections rather than features that are relevant for the

  11. Clustering Objects from Multiple Collections

    NARCIS (Netherlands)

    Hollink, V.; Someren, M. van; Boer, V. de

    2009-01-01

    Clustering methods cluster objects on the basis of a similarity measure between the objects. In clustering tasks where the objects come from more than one collection often part of the similarity results from features that are related to the collections rather than features that are relevant for the

  12. Clustering objects from multiple collections

    NARCIS (Netherlands)

    Hollink, V.; van Someren, M.; de Boer, V.

    2009-01-01

    Clustering methods cluster objects on the basis of a similarity measure between the objects. In clustering tasks where the objects come from more than one collection often part of the similarity results from features that are related to the collections rather than features that are relevant for the

  13. Creating the First SCORM Object

    Science.gov (United States)

    Gonzalez-Barbone, Victor; Anido-Rifon, Luis

    2008-01-01

    The creation of the first SCORM (Shareable Content Object Reference Model) object offers some challenges and difficulties which go beyond the facilities offered by content generation applications. In particular, the creation of really reusable, searchable learning objects requires a detailed consideration of metadata, where some institutional…

  14. A Model for Concurrent Objects

    DEFF Research Database (Denmark)

    Sørensen, Morten U.

    1996-01-01

    We present a model for concurrent objects where obejcts interact by taking part in common events that are closely matched to form call-response pairs, resulting in resulting in rendez-vous like communications. Objects are built from primitive objects by parallel composition, encapsulation and hid...

  15. Objective Tests versus Subjective tests

    Institute of Scientific and Technical Information of China (English)

    魏福林

    2007-01-01

    objective test has only one correct answer, while subjective test has a range of possible answers. Because of this feature, reliability will not be difficult to achieve in the marking of the objective item, while the marking of the subjective items is reliable. On the whole, a good test must contain both subjective and objective test items.

  16. Automatic object recognition: critical issues and current approaches

    Science.gov (United States)

    Sadjadi, Firooz A.

    1991-08-01

    Automatic object recognition, with its diverse applications in numerous fields of science and technology, is permeating many aspects of military and civilian industries. This paper gives an overview of the issues confronting the automatic object recognition field and the approaches being used to address these issues.

  17. CHP Technologies

    Science.gov (United States)

    Learn about CHP technologies, including reciprocating engines, combustion turbines, steam turbines, microturbines, fuel cells, and waste heat to power. Access the Catalog of CHP Technologies and the Biomass CHP Catalog of Technologies.

  18. Assistive Technology

    Science.gov (United States)

    ... Page Resize Text Printer Friendly Online Chat Assistive Technology Assistive technology (AT) is any service or tool that helps ... be difficult or impossible. For older adults, such technology may be a walker to improve mobility or ...

  19. SODA: Smart Objects, Dumb Archives

    Science.gov (United States)

    Nelson, Michael L.; Maly, Kurt; Zubair, Mohammad; Shen, Stewart N. T.

    2004-01-01

    We present the Smart Object, Dumb Archive (SODA) model for digital libraries (DLs). The SODA model transfers functionality traditionally associated with archives to the archived objects themselves. We are exploiting this shift of responsibility to facilitate other DL goals, such as interoperability, object intelligence and mobility, and heterogeneity. Objects in a SODA DL negotiate presentation of content and handle their own terms and conditions. In this paper we present implementations of our smart objects, buckets, and our dumb archive (DA). We discuss the status of buckets and DA and how they are used in a variety of DL projects.

  20. USE OF AUGMENTED REALITY TECHNOLOGY FOR VISUALIZATION OF A VIRTUAL OBJECT IN A REAL ENVIRONMENT Использование технологии дополненной реальности для визуализации виртуального объекта в реальном интерьере

    Directory of Open Access Journals (Sweden)

    Kravtsov A. A.

    2012-12-01

    Full Text Available The article defines modern trends in user interface design creation, tells about use of augmented reality technology and presents an application for visualization of a virtual object in a real environment using augmented reality technology