WorldWideScience

Sample records for technology materials science

  1. JPRS Report, Science & Technology, USSR: Materials Science

    Science.gov (United States)

    2015-08-20

    JPRS-UPIS-90-Q03 1 MAY 1990 S#J1%\\ ■ ■■in FOREIGN BROADCAST INFORMATION SERVICE .JPRS Report — 19981021 129 Science & Technology USSR... entity , with average temperature of its own, engaged in heat exchange with the two-phase zone according to the convection law. However, such a model...it represents a definite technological complication and requires separate solution. 7. Problems of mechanizing the loading of the initial blank

  2. Materials Science and Technology Teachers Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Wieda, Karen J.; Schweiger, Michael J.; Bliss, Mary; Pitman, Stan G.; Eschbach, Eugene A.

    2008-09-04

    The Materials Science and Technology (MST) Handbook was developed by Pacific Northwest National Laboratory, in Richland, Washington, under support from the U.S. Department of Energy. Many individuals have been involved in writing and reviewing materials for this project since it began at Richland High School in 1986, including contributions from educators at the Northwest Regional Education Laboratory, Central Washington University, the University of Washington, teachers from Northwest Schools, and science and education personnel at Pacific Northwest National Laboratory. Support for its development was also provided by the U.S. Department of Education. This introductory course combines the academic disciplines of chemistry, physics, and engineering to create a materials science and technology curriculum. The course covers the fundamentals of ceramics, glass, metals, polymers and composites. Designed to appeal to a broad range of students, the course combines hands-on activities, demonstrations and long term student project descriptions. The basic philosophy of the course is for students to observe, experiment, record, question, seek additional information, and, through creative and insightful thinking, solve problems related to materials science and technology. The MST Teacher Handbook contains a course description, philosophy, student learning objectives, and instructional approach and processes. Science and technology teachers can collaborate to build the course from their own interests, strengths, and experience while incorporating existing school and community resources. The course is intended to meet local educational requirements for technology, vocational and science education.

  3. JPRS Report, Science & Technology, USSR: Materials Science.

    Science.gov (United States)

    1988-04-04

    Producing Kovar-To-Glass Seals by Heating With Light From Xenon^Arc Lamps CM. 1, Oparin , V. B. Redchits; SVAROCHNOYE PROIZVODSTVO, No 11, Nov 87) 28...10-11 iArticle by M, I, Oparin , candidate of technical sciences, and V, B. Redchits, engineer] [Abstract] Hermetic Kovar-to-glass seals were

  4. JPRS Report, Science & Technology, USSR: Materials Science

    Science.gov (United States)

    1988-03-15

    of Smelting 12Crl2NiCu Cast Steel for Water-Turbine Blades (I.A. Kuntsevich , V.V. Kobzistyy et al.; LITEYNOYE PROIZVODSTVO, No 4, Apr 87) Alloying...Moscow LITEYNOYE PROIZVODSTVO in Russian No 4, Apr 87 pp 9-10 [Article by I.A. Kuntsevich , candidate of technical sciences, V.V. Kobzistyy, engineer

  5. JPRS Report, Science & Technology, USSR: Materials Science.

    Science.gov (United States)

    2007-11-02

    Semiconductor Physics Institute, Siberian Department, USSR Academy of Sciences] [Abstract] An experimental study was made concerning use of binary Bi...begun at the "round table". We are waiting for letters with your opinions and suggestions which, we hope, will help accelerate the solution of the...received 23 Jun 86) pp 516-520 [Article "by B. I. Kosilo, L. I. Polezhayeva, L. P. Polyakova, Ye. G. Polyakov and A. B. Smirnov, Institute of the

  6. JPRS Report, Science & Technology, USSR: Materials Science

    Science.gov (United States)

    1988-01-11

    material possess special heat-stability. The optical characteristics of metals usually used as selective solar cell absorbers (high absorbability in the...single-phase crystalline (spinel- perovskite -, garnet-like materials), as well as composite. Electrical, mechanical, optical, magnetic, and biological...Dielectrics Ferroelectries Piezoelectrics Semiconductors Electron-ion semiconductors Ion conductors AI2O3, BeO BaTi03, SrTi03 Pb (Ti, Zr)Oß

  7. JPRS Report, Science & Technology, USSR: Materials Science

    Science.gov (United States)

    2007-11-02

    structural materials and the formation of macroscopic and microscopic over- growth on them. Specimens measuring 100x50x2 mm were attached by PVC ...composition, in percent: 0.10 C; 0.39 Mn; 0.019 S; 0.020 P. A boron-containing slag-forming mixture was placed in the mold before pouring of one of the...steel making system consisting of oxygen converters, steel-pouring ladles, installations for blowing argon through the steel and continuous casting

  8. ION BEAM TECHNOLOGY IN MATERIALS SCIENCE

    Directory of Open Access Journals (Sweden)

    M.B. Dutt

    2009-07-01

    Full Text Available Ion beam processing of materials in general and semiconductors in particular, started with ion implantation in semiconductors; first used by Ohl at Bell Labs in 1952 toimprove the electrical characteristics of silicon point contact diodes by implanting H, He, N and Ar ions.The improvement was obvious but it was caused by surface damage and notthe ion implantation. However, in the process, ion implantation had an entry and slowly it became popular among the scientists and the technocrats. Thus, over the last six decades, demands continued for new and improved materials and devices that has pushed ion implanter to expand to ion beam technology. In the semiconductor industry alone, the processes have evolved so much so that in today’s world, there are morethan 4000 ion implanters in the IC fab lines apart from otherion beam-assisted processing machines. Ion beam deposition techniques, ion beam lithography, ion beam etching, ion beammilling are all ion beam beam-assisted techniques that arebeing extensively used in semiconductor industries. In this backdrop, it was thought that a compilation of uses of allthese techniques together with relevant tools of analysis toserve as a guide to the semiconductor scientists and technologists for a glimpse of the ongoing efforts being madein this direction. Fortunately enough, Indian research is not lagging in use of all these modern day technologies that will be evident as the reader will go from one article to the other of this special volume.Defence Science Journal, 2009, 59(4, pp.328-328, DOI:http://dx.doi.org/10.14429/dsj.59.1530

  9. Critical materialism: science, technology, and environmental sustainability.

    Science.gov (United States)

    York, Richard; Clark, Brett

    2010-01-01

    There are widely divergent views on how science and technology are connected to environmental problems. A view commonly held among natural scientists and policy makers is that environmental problems are primarily technical problems that can be solved via the development and implementation of technological innovations. This technologically optimistic view tends to ignore power relationships in society and the political-economic order that drives environmental degradation. An opposed view, common among postmodernist and poststructuralist scholars, is that the emergence of the scientific worldview is one of the fundamental causes of human oppression. This postmodernist view rejects scientific epistemology and often is associated with an anti-realist stance, which ultimately serves to deny the reality of environmental problems, thus (unintentionally) abetting right-wing efforts to scuttle environmental protection. We argue that both the technologically optimistic and the postmodernist views are misguided, and both undermine our ability to address environmental crises. We advocate the adoption of a critical materialist stance, which recognizes the importance of natural science for helping us to understand the world while also recognizing the social embeddedness of the scientific establishment and the need to challenge the manipulation of science by the elite.

  10. JPRS report: Science and technology. Central Eurasia: Materials science

    Science.gov (United States)

    1992-03-01

    A bibliography is given of Central Eurasian research in materials science. Topics covered include analysis and testing; corrosion resistance; ferrous metals; nonferrous alloys, brazes, and solders; heat treatment; welding, brazing, and soldering; and extractive metallurgy.

  11. Learning about materials science and technology by deconstructing modern products

    DEFF Research Database (Denmark)

    Horsewell, Andy

    Get the attention of young engineering students, interest and inspire them. Encourage them to think about materials science and technology by looking at the consumer products and gadgets that interest them. Analyse what modern products are constructed of, and how and why the materials...... and the processes have been chosen in their manufacture i.e. deconstruct modern products. Suitable items can easily be found in personal communication and entertainment, including all manner of sports goods. Further, the current pace of materials product development ensures that using these objects to focus...... teaching encourages and demands constant modernisation of the course and the materials being presented. A consideration of material and process selection for components in a modern product can be a dynamic starting point for a course on materials science and engineering; providing inspiration and showing...

  12. Components of abstracts in materials science and technology

    Directory of Open Access Journals (Sweden)

    Alenka Šauperl

    2009-01-01

    Full Text Available We investigated the structure of abstracts in Slovenian and international journals in the field of materials and technology. The aim of the study was to analyze the adherence of the abstracts published in Materials and Technology (MIT and Materials Science and Technology (MST to two different instructions for the preparation of abstracts (scheme based on ISO 214:1976 and Spanring system. 25 abstracts from each journal were divided into sentences. We tried to place the sentences into one of the categories of the above mentioned schemes. The research was a part of the postgraduate study in the Department of Library and Information Science and Book Studies (Faculty of Arts, Ljubljana in September and October 2008. There are no important differences between MIT and MST. Spanring system seems more appropriate for the field of materials and technology. The place and the time of the research should be added to abstracts and the Hu-bit category should be distributed into two parts: Hu-M (method and Hu-R (results. The recommended Spanring system should be harmonized with authors, who publish in these serials and the effect of the instructions should be analyzed, too.

  13. Recent trends in physics of material science and technology

    CERN Document Server

    Shrivastava, Keshav; Akhtar, Jamil

    2015-01-01

    This book discusses in detail the recent trends in Computational Physics, Nano-physics and Devices Technology. Numerous modern devices with very high accuracy, are explored In conditions such as longevity and extended possibilities to work in wide temperature and pressure ranges, aggressive media, etc. This edited volume presents 32 selected papers  of the 2013 International Conference on Science & Engineering in Mathematics, Chemistry and Physics . The book is divided into three  scientific Sections: (i) Computational Physics, (ii) Nanophysics and Technology, (iii) Devices and Systems and is addressed to Professors, post-graduate students, scientists and engineers taking part in R&D of nano-materials, ferro-piezoelectrics, computational Physics and devices system, and also different devices based on broad applications in different areas of modern science and technology.

  14. Neutron scattering treatise on materials science and technology

    CERN Document Server

    Kostorz, G

    1979-01-01

    Treatise on Materials Science and Technology, Volume 15: Neutron Scattering shows how neutron scattering methods can be used to obtain important information on materials. The book discusses the general principles of neutron scattering; the techniques used in neutron crystallography; and the applications of nuclear and magnetic scattering. The text also describes the measurement of phonons, their role in phase transformations, and their behavior in the presence of crystal defects; and quasi-elastic scattering, with its special merits in the study of microscopic dynamical phenomena in solids and

  15. Surface physics of materials materials science and technology

    CERN Document Server

    Blakely, J M

    2013-01-01

    Surface Physics of Materials presents accounts of the physical properties of solid surfaces. The book contains selected articles that deal with research emphasizing surface properties rather than experimental techniques in the field of surface physics. Topics discussed include transport of matter at surfaces; interaction of atoms and molecules with surfaces; chemical analysis of surfaces; and adhesion and friction. Research workers, teachers and graduate students in surface physics, and materials scientist will find the book highly useful.

  16. 75 FR 39664 - Grant of Authority For Subzone Status Materials Science Technology, Inc. (Specialty Elastomers...

    Science.gov (United States)

    2010-07-12

    ... Foreign-Trade Zones Board Grant of Authority For Subzone Status Materials Science Technology, Inc... Materials Science Technology, Inc., located in Conroe, Texas, (FTZ Docket 46-2009, filed October 27, 2009... Science Technology, Inc., located in Conroe, Texas (Subzone 265C), as described in the application...

  17. JPRS Report, Science & Technology, Japan, Bio-Functional Materials.

    Science.gov (United States)

    1990-01-17

    BIO -Functional Materials Selected abstracts on the design, structure, and functions of bio -functional materials; "priority areas of research" sponsored by the Ministry of Education, Science and Culture

  18. Technical Education Outreach in Materials Science and Technology Based on NASA's Materials Research

    Science.gov (United States)

    Jacobs, James A.

    2003-01-01

    The grant NAG-1 -2125, Technical Education Outreach in Materials Science and Technology, based on NASA s Materials Research, involves collaborative effort among the National Aeronautics and Space Administration s Langley Research Center (NASA-LaRC), Norfolk State University (NSU), national research centers, private industry, technical societies, colleges and universities. The collaboration aims to strengthen math, science and technology education by providing outreach related to materials science and technology (MST). The goal of the project is to transfer new developments from LaRC s Center for Excellence for Structures and Materials and other NASA materials research into technical education across the nation to provide educational outreach and strengthen technical education. To achieve this goal we are employing two main strategies: 1) development of the gateway website and 2) using the National Educators Workshop: Update in Engineering Materials, Science and Technology (NEW:Updates). We have also participated in a number of national projects, presented talks at technical meetings and published articles aimed at improving k-12 technical education. Through the three years of this project the NSU team developed the successful MST-Online site and continued to upgrade and update it as our limited resources permitted. Three annual NEW:Updates conducted from 2000 though 2002 overcame the challenges presented first by the September 11,2001 terrorist attacks and the slow U.S. economy and still managed to conduct very effective workshops and expand our outreach efforts. Plans began on NEW:Update 2003 to be hosted by NASA Langley as a part of the celebration of the Centennial of Controlled Flight.

  19. Pre-Service Science Teachers Views on STEM Materials and STEM Competition in Instructional Technologies and Material Development Course

    Science.gov (United States)

    Cetin, Ali; Balta, Nuri

    2017-01-01

    This qualitative study was designed to introduce STEM (Science, Technology, Engineering, Mathematics) activities to preservice science teachers and identify their views about STEM materials. In this context, a competition was organized with 42 preservice science teachers (13 male- 29 female) who took Instructional Technologies and Material…

  20. JPRS Report, Science & Technology, USSR: Materials Science, Mechanics and Technology of Metal and Metal Ceramic Composite Material Products

    Science.gov (United States)

    1990-09-27

    produced, their phase composition and bending strength, as well as investigation of the promise of adding niobium carbide NbC to these materials. The...time increases, NbC does not inhibit shrink- niobium carbide was the same — 3 %. This content of age, which is a technological advantage. NbC is

  1. Analytical techniques for thin films treatise on materials science and technology

    CERN Document Server

    Tu, K N

    1988-01-01

    Treatise on Materials Science and Technology, Volume 27: Analytical Techniques for Thin Films covers a set of analytical techniques developed for thin films and interfaces, all based on scattering and excitation phenomena and theories. The book discusses photon beam and X-ray techniques; electron beam techniques; and ion beam techniques. Materials scientists, materials engineers, chemical engineers, and physicists will find the book invaluable.

  2. The Development Materials from Substances Waste for Some Topics in Science and Technology Textbook for Primary

    Directory of Open Access Journals (Sweden)

    Abdullah Aydın

    2011-06-01

    Full Text Available The aim of study is to develop instructional materials from substances waste in which students teachers have problems to learn, taught in Instructional Technology and Materials Course at the third year of primary science teacher education program. The study was carried out with 54 primary science student teachers attending primary science teacher education program in Ahi Evran University Faculty of Education, in the fall term of the 2009-2010 academic year. Material design or development of prospective teachers' views were taken before and after. The findings from the material prepared were supported by the data obtained from the interviews conducted with 16 head student teachers. It was concluded that, based on the findings obtained from the material design the environmental pollution by waste products are designed for visual teaching materials. Can be taken into account the materials designed or developed by nominated teacher, during revised to be name of last books.

  3. Detection of Nuclear Weapons and Materials: Science, Technologies, Observations

    Science.gov (United States)

    2010-06-04

    between Z=57 (lanthanum) and Z=72 ( hafnium ), inclusive, are very rare in commerce, making 72 a reasonable boundary between high Z and lower Z elements...materials used in nuclear weapons of other nations (e.g., for alloys ) for purposes of nuclear forensics. (2) Another task is to develop the algorithms

  4. [Science and Technology and Recycling: Instructional Materials on Aluminum.

    Science.gov (United States)

    Aluminum Association, New York, NY.

    Educational materials on the manufacture and use of aluminum are assembled in this multi-media unit for use by junior high and secondary school students. Student booklets and brochures include: "The Story of Aluminum,""Uses of Aluminum,""Independent Study Guide for School Research Projects,""Questions and Answers About Litter, Solid Waste, and…

  5. JPRS Report - Science & Technology Japan: New Functional Materials.

    Science.gov (United States)

    2007-11-02

    Liquid Crystals Useful as a High-Performance Material [Akihiro Abe ] 7 Fundamental Analysis on the Effect of the Structural Modification on the...Optical Property of Conducting Polymer and Origin of Its Functionality [Katsumi Yoshino, Masanori Ozaki] lk Ab Initio Molecular Orbital Calculations of...Nishida, et al. ] 1+8 - d - Molecular Design of Polycationic Functional Elastomers [ Shinzo Yamashita, Shinzo Kohjiya] , ^9 Synthesis of

  6. OCRWM SCIENCE & TECHNOLOGY PROGRAM MATERIALS PERFORMANCE TARGETED THRUST FACT SHEET

    Energy Technology Data Exchange (ETDEWEB)

    DOE

    2005-10-06

    In severe corrosive or abrasive environments, steel is rarely used since the range of properties available, in existing steels, are insufficient, resulting in the prevalent usage of either corrosion resistant materials like nickel based superalloys or abrasion resistant materials like tungsten carbide based hardmetals. Recently, a host of carbide based alloys including WC-Co-Cr, NiCr-Cr{sub 3}C{sub 2}, WC-Cr{sub 3}C{sub 2}-Ni etc. have been developed in an attempt to bridge the gap between providing both wear and corrosion protection. In this presentation, data will be presented showing how a newly developed steel coating, SAM2X5, with an amorphous/nanocomposite structure can bridge the gap between conventional metallic alloys and ceramic hardmetal performance with excellent combinations of properties including corrosion resistance superior to nickel superalloys in a number of environments and wear resistance approaching that of tungsten carbide cobalt. The unique combination of damage tolerance developed should be especially applicable for the replacement of electrolytic hard chromium.

  7. Structural properties of porous materials and powders used in different fields of science and technology

    CERN Document Server

    Volfkovich, Yury Mironovich; Bagotsky, Vladimir Sergeevich

    2014-01-01

    This book provides a comprehensive and concise description of most important aspects of experimental and theoretical investigations of porous materials and powders, with the use and application of these materials in different fields of science, technology, national economy and environment. It allows the reader to understand the basic regularities of heat and mass transfer and adsorption occurring in qualitatively different porous materials and products, and allows the reader to optimize the functional properties of porous and powdered products and materials. Written in an straightforward and transparent manner, this book is accessible to both experts and those without specialist knowledge, and it is further elucidated by drawings, schemes and photographs. Porous materials and powders with different pore sizes are used in many areas of industry, geology, agriculture and science. These areas include (i) a variety of devices and supplies; (ii) thermal insulation and building materials; (iii) oil-bearing geologic...

  8. 10th International School of Materials Science and Technology : Intercalation in Layered Materials "Ettore Majorana"

    CERN Document Server

    1986-01-01

    This volume is prepared from lecture notes for the course "Intercalation in Layered Materials" which was held at the Ettore Majorana Centre for Scientific Culture at Erice, Sicily in July, 1986, as part of the International School of Materials Science and Tech­ nology. The course itself consisted of formal tutorial lectures, workshops, and informal discussions. Lecture notes were prepared for the formal lectures, and short summaries of many of the workshop presentations were prepared. This volume is based on these lecture notes and research summaries. The material is addressed to advanced graduate students and postdoctoral researchers and assumes a background in basic solid state physics. The goals of this volume on Intercalation in Layered Materials include an introduc­ tion to the field for potential new participants, an in-depth and broad exposure for stu­ dents and young investigators already working in the field, a basis for cross-fertilization between workers on various layered host materials...

  9. Marginalization of Socioscientific Material in Science-Technology-Society Science Curricula: Some Implications for Gender Inclusivity and Curriculum Reform

    Science.gov (United States)

    Hughes, Gwyneth

    2000-05-01

    Science education reformers have argued that presenting science in the abstract is neither motivating nor inclusive of the majority of students. Science-technology-society (STS) curricula that give science an accessible social context have developed in response, but controversy surrounds the extent to which students should be introduced to socioscientific debate. Using material from a case study of Salters' Advanced Chemistry in the United Kingdom, this article demonstrates how socioscientific material is marginalized through the structures and language of syllabus texts and through classroom practices. This means students are unlikely to engage with socioscientific aspects in their course. Socioscientific content is gendered through association with social concerns and epistemological uncertainty, and because gender is asymmetric, socioscience is devalued with respect to the masculinity of abstract science. Teachers fear that extensive coverage of socioscience devalues the curriculum, alienates traditional science students and jeopardizes their own status as gatekeepers of scientific knowledge. Thus, although STS curricula such as Salters' offer potential for making science more accessible, the article concludes that greater awareness of, and challenges to, gender binaries could result in more effective STS curriculum reform.

  10. Review on the EFDA programme on tungsten materials technology and science

    Energy Technology Data Exchange (ETDEWEB)

    Rieth, M., E-mail: Michael.rieth@imf.fzk.de [Forschungszentrum Karlsruhe, Institute for Materials Research, Karlsruhe (Germany); Boutard, J.L. [EFDA-Close Support Unit, Garching (Germany); Dudarev, S.L. [Culham Science Centre, Abingdon, Oxfordshire (United Kingdom); Ahlgren, T. [University of Helsinki, Department of Physics, Helsinki (Finland); Antusch, S. [Forschungszentrum Karlsruhe, Institute for Materials Research, Karlsruhe (Germany); Baluc, N. [Centre de Recherches en Physique des Plasmas (CRPP), Lausanne (Switzerland); Barthe, M.-F. [CNRS, UPR3079 CEMHTI, 1D Avenue de la Recherche Scientifique, 45071 Orleans cedex 2 (France); Universite d' Orleans, Polytech ou Faculte des Sciences, Avenue du Parc Floral, BP 6749, 45067 Orleans cedex 2 (France); Becquart, C.S. [Laboratoire de Metallurgie Physique et Genie des Materiaux, Villeneuve d' Ascq (France); Ciupinski, L. [Warsaw University of Technology, Faculty of Materials Science and Engineering, Warsaw (Poland); Correia, J.B. [IST, Lisboa (Portugal); Domain, C. [Laboratoire de Metallurgie Physique et Genie des Materiaux, Villeneuve d' Ascq (France); Fikar, J. [Centre de Recherches en Physique des Plasmas (CRPP), Lausanne (Switzerland); Fortuna, E. [Warsaw University of Technology, Faculty of Materials Science and Engineering, Warsaw (Poland); Fu, C.-C. [CEA, Service de Recherches de Metallurgie Physique, Saclay (France); Gaganidze, E. [Forschungszentrum Karlsruhe, Institute for Materials Research, Karlsruhe (Germany); Galan, T.L. [Universidad Rey Juan Carlos, Materials Science and Engineering, Madrid (Spain); Garcia-Rosales, C. [CEIT, San Sebastian (Spain); Gludovatz, B. [OAW, Erich Schmid Institute of Materials Science, Leoben (Austria); Greuner, H. [Max-Planck-Institut fuer Plasmaphysik, EURATOM Association, Garching (Germany); Heinola, K. [University of Helsinki, Department of Physics, Helsinki (Finland)

    2011-10-01

    All the recent DEMO design studies for helium cooled divertors utilize tungsten materials and alloys, mainly due to their high temperature strength, good thermal conductivity, low erosion, and comparably low activation under neutron irradiation. The long-term objective of the EFDA fusion materials programme is to develop structural as well as armor materials in combination with the necessary production and fabrication technologies for future divertor concepts. The programmatic roadmap is structured into four engineering research lines which comprise fabrication process development, structural material development, armor material optimization, and irradiation performance testing, which are complemented by a fundamental research programme on 'Materials Science and Modeling'. This paper presents the current research status of the EFDA experimental and testing investigations, and gives a detailed overview of the latest results on fabrication, joining, high heat flux testing, plasticity, modeling, and validation experiments.

  11. 1995 Federal Research and Development Program in Materials Science and Technology

    Energy Technology Data Exchange (ETDEWEB)

    None

    1995-12-01

    The Nation's economic prosperity and military security depend heavily on development and commercialization of advanced materials. Materials are a key facet of many technologies, providing the key ingredient for entire industries and tens of millions of jobs. With foreign competition in many areas of technology growing, improvements in materials and associated processes are needed now more than ever, both to create the new products and jobs of the future and to ensure that U.S. industry and military forces can compete and win in the international arena. The Federal Government has invested in materials research and development (R&D) for nearly a century, helping to lay the foundation for many of the best commercial products and military components used today. But while the United States has led the world in the science and development of advanced materials, it often has lagged in commercializing them. This long-standing hurdle must be overcome now if the nation is to maintain its leadership in materials R&D and the many technologies that depend on it. The Administration therefore seeks to foster commercialization of state-of-the-art materials for both commercial and military use, as a means of promoting US industrial competitiveness as well as the procurement of advanced military and space systems and other products at affordable costs. The Federal R&D effort in Fiscal Year 1994 for materials science and technology is an estimated $2123.7 million. It includes the ongoing R&D base that support the missions of nine Federal departments and agencies, increased strategic investment to overcome obstacles to commercialization of advanced materials technologies, interagency cooperation in R&D areas of mutual benefit to leverage assets and eliminate duplicative work, cost-shared research with industrial and academic partners in critical precompetitive technology areas, and international cooperation on selected R&D topics with assured benefits for the United States. The

  12. Development and validation of science, technology, engineering and mathematics (STEM) based instructional material

    Science.gov (United States)

    Gustiani, Ineu; Widodo, Ari; Suwarma, Irma Rahma

    2017-05-01

    This study is intended to examine the development and validation of simple machines instructional material that developed based on Science, Technology, Engineering and Mathematics (STEM) framework that provides guidance to help students learn and practice for real life and enable individuals to use knowledge and skills they need to be an informed citizen. Sample of this study consist of one class of 8th grader at a junior secondary school in Bandung, Indonesia. To measure student learning, a pre-test and post-test were given before and after implementation of the STEM based instructional material. In addition, a questionnaire of readability was given to examine the clarity and difficulty level of each page of instructional material. A questionnaire of students' response towards instructional material given to students and teachers at the end of instructional material reading session to measure layout aspects, content aspects and utility aspects of instructional material for being used in the junior secondary school classroom setting. The results show that readability aspect and students' response towards STEM based instructional material of STEM based instructional material is categorized as very high. Pretest and posttest responses revealed that students retained significant amounts information upon completion of the STEM instructional material. Student overall learning gain is 0.67 which is categorized as moderate. In summary, STEM based instructional material that was developed is valid enough to be used as educational materials necessary for conducting effective STEM education.

  13. Advanced Materials Technology

    Science.gov (United States)

    Blankenship, C. P. (Compiler); Teichman, L. A. (Compiler)

    1982-01-01

    Composites, polymer science, metallic materials (aluminum, titanium, and superalloys), materials processing technology, materials durability in the aerospace environment, ceramics, fatigue and fracture mechanics, tribology, and nondestructive evaluation (NDE) are discussed. Research and development activities are introduced to the nonaerospace industry. In order to provide a convenient means to help transfer aerospace technology to the commercial mainstream in a systematic manner.

  14. The Science and Technology Challenges of the Plasma-Material Interface for Magnetic Fusion Energy

    Science.gov (United States)

    Whyte, Dennis

    2013-09-01

    The boundary plasma and plasma-material interactions of magnetic fusion devices are reviewed. The boundary of magnetic confinement devices, from the high-temperature, collisionless pedestal through to the surrounding surfaces and the nearby cold high-density collisional plasmas, encompasses an enormous range of plasma and material physics, and their integrated coupling. Due to fundamental limits of material response the boundary will largely define the viability of future large MFE experiments (ITER) and reactors (e.g. ARIES designs). The fusion community faces an enormous knowledge deficit in stepping from present devices, and even ITER, towards fusion devices typical of that required for efficient energy production. This deficit will be bridged by improving our fundamental science understanding of this complex interface region. The research activities and gaps are reviewed and organized to three major axes of challenges: power density, plasma duration, and material temperature. The boundary can also be considered a multi-scale system of coupled plasma and material science regulated through the non-linear interface of the sheath. Measurement, theory and modeling across these scales are reviewed, with a particular emphasis on establishing the use dimensionless parameters to understand this complex system. Proposed technology and science innovations towards solving the PMI/boundary challenges will be examined. Supported by US DOE award DE-SC00-02060 and cooperative agreement DE-FC02-99ER54512.

  15. PREFACE: International Seminar on Science and Technology of Glass Materials (ISSTGM-2009)

    Science.gov (United States)

    Veeraiah, N.

    2009-07-01

    The progress of the human race is linked with the development of new materials and also the values they acquired in the course of time. Though the art of glass forming has been known from Egyptian civilization, the understanding and use of these glasses for technological applications only became possible once the structural aspects were revealed by the inspiring theories proposed by William H Zachariasen. Glass and glass ceramics have become the essential materials for modern technology. The applications of these materials are wide and cover areas such as optical communication, laser host, innovative architecture, bio-medical, automobile and space technology. As we master the technology, we must also learn to use it judiciously and for the overall development of all in this global village. The International Seminar on Science and Technology of Glass Materials (ISSTGM-2009) is organized to bring together scientists, academia and industry in order to discuss various aspects of the technology and to inspire young scholars to take up fruitful research. Various topics such as glass formation and glass-ceramics, glass structure, applications of glass and glass ceramics in nuclear waste management, radiation dosimetry, electronics and information technology, biotechnological applications, bulk metallic glasses, glasses containing nano-particles, hybrid glasses, novel glasses and applications in photonics, Non-linear optics and energy generation were discussed. In this volume, 59 research articles covering 18 invited talks, 10 oral presentations and 31 poster presentations are included. We hope these will serve as a valuable resource to all the scientists and scholars working with glass materials. Acharya Nagarjuna University, established in 1976, is named after the great Buddhist preceptor and philosopher, Acharya Nagarjuna, who founded a university on the banks of river Krishna some centuries ago. The University is situated between Vijayawada and Guntur, the famous

  16. How does materiality shape Childbirth? An explorative journey into evidence, childbirth practices & Science and Technology Studies

    DEFF Research Database (Denmark)

    Clausen, Jette Aaroe

    2010-01-01

    is Science and Technology Studies (STS). (Post) Actor Network Theory and postphenomenology is used as theoretical resources to help formulate questions to EBM, midwifery and birthing practices. A central theoretical resource is the Dutch Philosopher Annemarie Mol’s concept of mul-tiplicity. Mol argues...... that medical practices should be studied relationally, both humans as well as the non humans should be part of the analysis. As a conse-quence entities multiply; bodies and technologies be-come more than one but less than many. The aim of the dissertation is to produce a "productive feeling of astonishment......" for those positioned in evidence based medicine and midwifery about the use of technology in childbirth. The empirical material is developed during a field study at a maternity ward. Noisy stories about the use of epidurals and fetal monitors are used as resources. Noisy stories are stories that do...

  17. NASA's Additive Manufacturing Development Materials Science to Technology Infusion - Connecting the Digital Dots

    Science.gov (United States)

    Vickers, John

    2017-01-01

    At NASA, the first steps of the Journey to Mars are well underway with the development of NASA's next generation launch system and investments in research and technologies that should increase the affordability, capability, and safety of exploration activities. Additive Manufacturing presents a disruptive opportunity for NASA to design and manufacture hardware with new materials at dramatically reduced cost and schedule. Opportunities to incorporate additive manufacturing align very well with NASA missions and with most NASA programs related to space, science, and aeronautics. The Agency also relies on many partnerships with other government agencies, industry and academia.

  18. Magnet Science and Technology for Basic Research at the High Field Laboratory for Superconducting Materials

    Institute of Scientific and Technical Information of China (English)

    渡辺和雄

    2007-01-01

    Since the first practical cryocooled superconducting magnet using a GM-cryocooler and high temperature superconducting current leads has been demonstrated successfully at the High Field Laboratory for Superconducting Materials (HFLSM), various kinds of cryocooled superconducting magnets in fields up to 15 T have been used to provide access for new research areas in fields of magneto-science. Recently, the HFLSM has succeeded in demonstrating a cryocooed 18 T high temperature superconducting magnet and a high field cryocooled 27.5 T hybrid magnet. Cryocooled magnet technology and basic research using high field magnets at the HFLSM are introduced.

  19. Preparation and properties of thin films treatise on materials science and technology

    CERN Document Server

    Tu, K N

    1982-01-01

    Treatise on Materials Science and Technology, Volume 24: Preparation and Properties of Thin Films covers the progress made in the preparation of thin films and the corresponding study of their properties. The book discusses the preparation and property correlations in thin film; the variation of microstructure of thin films; and the molecular beam epitaxy of superlattices in thin film. The text also describes the epitaxial growth of silicon structures (thermal-, laser-, and electron-beam-induced); the characterization of grain boundaries in bicrystalline thin films; and the mechanical properti

  20. Developing the Science and Technology for the Material Plasma Exposure eXperiment (MPEX)

    Science.gov (United States)

    Rapp, Juergen; Biewer, Theodore; Bigelow, Timothy; Caughman, John; Goulding, Richard; Lumsdaine, Arnold; MPEX Team Team

    2016-10-01

    The Material Plasma Exposure eXperiment (MPEX) is a device planned to address scientific and technological gaps for the development of viable plasma facing components for fusion reactor conditions (FNSF, DEMO). MPEX is designed to deliver those plasma conditions with a novel Radio Frequency plasma source able to produce high density plasmas and heat electron and ions separately with Electron Bernstein Wave (EBW) heating and Ion Cyclotron Resonance Heating (ICRH) with a total installed power of 800 kW. The science and technology for this source system is currently being tested on Proto-MPEX. This is a linear device utilizing 12 water-cooled copper coils able to achieve peak magnetic fields of 1.6T. The currently total installed heating power (for helicon, EBW and ICRH) is 330kW. An overview of the status of this development program is given with an outlook to the next steps.

  1. The 5-Year Outlook on Science and Technology 1981. Source Materials Volume 2.

    Science.gov (United States)

    National Science Foundation, Washington, DC.

    This is the second of two volumes of source documents commissioned by the National Science Foundation in preparing the second 5-Year Outlook on Science and Technology for transmission to the Congress. This volume consists of the views of individuals selected by the Committee on Science, Engineering and Public Policy of the American Association for…

  2. Information technologies and software packages for education of specialists in materials science [In Russian

    NARCIS (Netherlands)

    V. Krzhizhanovskaya; S. Ryaboshuk

    2009-01-01

    This paper presents methodological materials, interactive text-books and software packages developed and extensively used for education of specialists in materials science. These virtual laboratories for education and research are equipped with tutorials and software environment for modeling complex

  3. Nature of ceramic materials: needs and opportunities for ceramic science and technology

    Energy Technology Data Exchange (ETDEWEB)

    Kingery, W D

    1976-01-01

    Ceramic materials are inherently strong but brittle; many are stable and corrosion-resistant in oxidizing and reducing atmospheres to high temperatures, and they have a variety of useful optical, thermal, electrical, and magnetic properties. Because of their strength, brittleness, and high-temperature stability, they are inherently difficult to fabricate in a way that allows full use of their intrinsic properties. The needs and opportunities for new and improved ceramic science and technology are mostly related to the critical importance of ceramics in determining the feasibility or effectiveness of large complex systems. One example of a past success is the development of square-loop ferrites for computer memory systems. Many other systems now under development--magnetohydrodynamic power generation, solar energy systems, high-temperature gas turbines, nuclear waste management, optical communications systems, and many others--will become practical only if the fabrication of essential ceramic components with reliably controlled properties is achieved. Development of the science of ceramic characteristics and properties, development of technology for reliably producing desired characteristics and properties, and the training of ceramic scientists are currently progressing at a rate wholly inadequate for meeting the evident requirements.

  4. Materials Science Division coal technology fifth quarterly report, October--December 1975. [Gasification plant materials

    Energy Technology Data Exchange (ETDEWEB)

    None

    1975-01-01

    Results on refractories tested in the slag-corrosion-cup test indicate that attack by acidic slag is less severe than by basic slag. The first (200 h) test in the slag-abrasion-corrosion test rig was completed. Nondestructive tests have been conducted at the CO/sub 2/ Acceptor plant and the HYGAS plant, and an instrumented piping section is being prepared for the Synthane plant. Carburization studies, which have been performed on several alloys, indicate that the extent of carburization increases with an increase in the chromium content of the alloy. Present erosion models predict greater erosion rates than found experimentally, but they assume all particles impact the surface. Failure analyses have been conducted for HYGAS materials, and support in materials identification was given to Synthane plant personnel. (auth)

  5. Science & technology review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    This document is the August, 1995 issue of the Science and Technology review, a Lawrence Berkeley Laboratory publication. It contains two major articles, one on Scanning Tunneling Microscopy - as applied to materials engineering studies, and one on risk assessment, in this case looking primarily at a health care problem. Separate articles will be indexed from this journal to the energy database.

  6. Five Years of Research Into Technology-Enhanced Learning at the Faculty of Materials Science and Technology

    Science.gov (United States)

    Svetský, Štefan; Moravčík, Oliver; Rusková, Dagmar; Balog, Karol; Sakál, Peter; Tanuška, Pavol

    2011-01-01

    The article describes a five-year period of Technology Enhanced Learning (TEL) implementation at the Faculty of Materials Science and Technology (MTF) in Trnava. It is a part of the challenges put forward by the 7th Framework Programme (ICT research in FP7) focused on "how information and communication technologies can be used to support learning and teaching". The empirical research during the years 2006-2008 was focused on technology-driven support of teaching, i. e. the development of VLE (Virtual Learning Environment) and the development of database applications such as instruments developed simultaneously with the information support of the project, and tested and applied directly in the teaching of bachelor students. During this period, the MTF also participated in the administration of the FP7 KEPLER project proposal in the international consortium of 20 participants. In the following period of 2009-2010, the concept of educational activities automation systematically began to develop. Within this concept, the idea originated to develop a universal multi-purpose system BIKE based on the batch processing knowledge paradigm. This allowed to focus more on educational approach, i.e. TEL educational-driven and to finish the programming of the Internet application - network for feedback (communication between teachers and students). Thanks to this specialization, the results of applications in the teaching at MTF could gradually be presented at the international conferences focused on computer-enhanced engineering education. TEL was implemented at a detached workplace and four institutes involving more than 600 students-bachelors and teachers of technical subjects. Four study programmes were supported, including technical English language. Altogether, the results have been presented via 16 articles in five countries, including the EU level (IGIP-SEFI).

  7. Packaging Technologies for 500 C SiC Electronics and Sensors: Challenges in Material Science and Technology

    Science.gov (United States)

    Chen, Liang-Yu; Neudeck, Philip G.; Behelm, Glenn M.; Spry, David J.; Meredith, Roger D.; Hunter, Gary W.

    2015-01-01

    This paper presents ceramic substrates and thick-film metallization based packaging technologies in development for 500C silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-based chip-level packages with gold (Au) thick-film metallization have been electrically characterized at temperatures up to 550C. The 96 alumina packaging system composed of chip-level packages and PCBs has been successfully tested with high temperature SiC discrete transistor devices at 500C for over 10,000 hours. In addition to tests in a laboratory environment, a SiC junction field-effect-transistor (JFET) with a packaging system composed of a 96 alumina chip-level package and an alumina printed circuit board was tested on low earth orbit for eighteen months via a NASA International Space Station experiment. In addition to packaging systems for electronics, a spark-plug type sensor package based on this high temperature interconnection system for high temperature SiC capacitive pressure sensors was also developed and tested. In order to further significantly improve the performance of packaging system for higher packaging density, higher operation frequency, power rating, and even higher temperatures, some fundamental material challenges must be addressed. This presentation will discuss previous development and some of the challenges in material science (technology) to improve high temperature dielectrics for packaging applications.

  8. Uses of DARPA Materials Sciences Technology in DoD Systems.

    Science.gov (United States)

    1996-05-01

    Optics and Lasers University of Central Florida Orlando, Florida May 1996 Sponsored by: Dr. Ben Wilcox Defense Advanced Research Projects Agency Defense...agencies. The author of this report, Dr. C. Martin Stickley, was selected to carry out this study by Dr. Ben Wilcox of the Materials Sciences Division of...Aids for VLSI Modeling 1975 - 1993* NDE 1975 - 1980 Rapid Solidification Rate Processing 1975 - 1986 HgCdTe Focal Plane Arrays 1975 - Present

  9. How does materiality shape Childbirth? An explorative journey into evidence, childbirth practices & Science and Technology Studies

    DEFF Research Database (Denmark)

    Clausen, Jette Aaroe

    2010-01-01

    The randomized controlled trial (RCT) is the golden standard in evidence based medicine (EBM), it is used to address the problem of intervention and the use of technology in childbirth. This dissertation discusses the relationship between RCTs and everyday birthing practices. The point of departure...... that medical practices should be studied relationally, both humans as well as the non humans should be part of the analysis. As a conse-quence entities multiply; bodies and technologies be-come more than one but less than many. The aim of the dissertation is to produce a "productive feeling of astonishment......" for those positioned in evidence based medicine and midwifery about the use of technology in childbirth. The empirical material is developed during a field study at a maternity ward. Noisy stories about the use of epidurals and fetal monitors are used as resources. Noisy stories are stories that do...

  10. JPRS Report, Science and Technology, USSR: Science & Technology Policy.

    Science.gov (United States)

    1988-07-18

    Leningrad for the development of a technology of the production of auto- clave cellular concrete from local raw materials. A con- tract was concluded...science and exact science disciplines 81 percent a. ich Various opinions are being voiced in the debates on the factors which gave rise to these

  11. New Material Development for Surface Layer and Surface Technology in Tribology Science to Improve Energy Efficiency

    Science.gov (United States)

    Ismail, R.; Tauviqirrahman, M.; Jamari, Jamari; Schipper, D. J.

    2009-09-01

    This paper reviews the development of new material and surface technology in tribology and its contribution to energy efficiency. Two examples of the economic benefits, resulted from the optimum tribology in the transportation sector and the manufacturing industry are discussed. The new materials are proposed to modify the surface property by laminating the bulk material with thin layer/coating. Under a suitable condition, the thin layer on a surface can provide a combination of good wear, a low friction and corrosion resistance for the mechanical components. The innovation in layer technology results molybdenum disulfide (MoS2), diamond like carbon (DLC), cubic boron nitride (CBN) and diamond which perform satisfactory outcome. The application of the metallic coatings to carbon fibre reinforced polymer matrix composites (CFRP) has the capacity to provide considerable weight and power savings for many engineering components. The green material for lubricant and additives such as the use of sunflower oil which possesses good oxidation resistance and the use of mallee leaves as bio-degradable solvent are used to answer the demand of the environmentally friendly material with good performance. The tribology research implementation for energy efficiency also touches the simple things around us such as: erasing the laser-print in a paper with different abrasion techniques. For the technology in the engineering surface, the consideration for generating the suitable surface of the components in running-in period has been discussed in order to prolong the components life and reduce the machine downtime. The conclusion, tribology can result in reducing manufacturing time, reducing the maintenance requirements, prolonging the service interval, improving durability, reliability and mechanical components life, and reducing harmful exhaust emission and waste. All of these advantages will increase the energy efficiency and the economic benefits.

  12. Aerosols Science and Technology

    CERN Document Server

    Agranovski, Igor

    2011-01-01

    This self-contained handbook and ready reference examines aerosol science and technology in depth, providing a detailed insight into this progressive field. As such, it covers fundamental concepts, experimental methods, and a wide variety of applications, ranging from aerosol filtration to biological aerosols, and from the synthesis of carbon nanotubes to aerosol reactors.Written by a host of internationally renowned experts in the field, this is an essential resource for chemists and engineers in the chemical and materials disciplines across multiple industries, as well as ideal supplementary

  13. Science, technology and society

    CERN Document Server

    Giacomelli, G

    2005-01-01

    We shall discuss some aspects of science and technology, their increasing role in the society, the fast advances in modern science, the apparent decrease of interest of the young generation in basic sciences, the importance of proper science popularization for better public education and awareness in scientific fields.

  14. Science and Technology Facilities

    Science.gov (United States)

    Moonen, Jean-Marie; Buono, Nicolas; Handfield, Suzanne

    2004-01-01

    These four articles relate to science and technology infrastructure for secondary and tertiary institutions. The first article presents a view on approaches to teaching science in school and illustrates ideal science facilities for secondary education. The second piece reports on work underway to improve the Science Complex at the "Universite…

  15. Environmental science and technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    The Program on Environmental Science and Technology developed at the Chemical and Environmental Technology Center comprehends environmental chemistry (water, soil and atmospheric chemistry), clean technologies (desulfurization of diesel and oil, biodegradable polymers and structural modification of polymers, recycling, pyrolysis of dangerous chemicals by molten salt technology), nanotechnology (magnetic nanoparticles, dendrimers, nano biomarkers, catalysts) and chemical characterization of nuclear fuel and nuclear fuel cycle waste (chemical and isotopic characterization). The Chemical and Environmental Technology Center was established in 1995, as an evolution of the former Department of Chemistry Engineering (1970). The program on environment science and technology was structured as consequence of the continuous growth of environmental activities on areas related to nuclear programs of IPEN. Moreover, it was an answer to the society concerning the climate changes and biodiversity preservation. All activities of research and development, services, supervision of graduate and under graduated students and courses performance at the center were related to the development, improvement and establishment of new technologies. The highlights of this period (2011 - 2013) were: - Development and use of modern analytical technology for the characterization of persistent pollutants and endocrine disrupters (metals, PAHA’s, PCBs, Pesticides, hormones, surfactants, plasticizer and human pharmaceuticals) in order to evaluate water quality and/or sediments; - Atmospheric chemistry and greenhouse gases: Evaluating an estimation of surface trace gas fluxes from aircraft measurements above the Amazon; - Cooperation with SABESP (Water and Sewage Company) and CETESB (State Environment Agency) in program for the development of public policies; - Studies and development in biodegradable polymers, polyolefins and advanced methods for polymer and rubber recycling and re-use; - Studies

  16. JPRS Report, Science & Technology, Japan

    Science.gov (United States)

    2007-11-02

    This is Japan Report with Science and Technology. It contains the issues with different topics on biotecnology , defense industry, nuclear engineering, Marine technology, science and technology policy.

  17. Science and Technology Policy

    DEFF Research Database (Denmark)

    Baark, Erik

    1996-01-01

    This paper examines the status of science and technology in Mongolia, and discusses the policy issues which have emerged with the transition to market economy in recent years.......This paper examines the status of science and technology in Mongolia, and discusses the policy issues which have emerged with the transition to market economy in recent years....

  18. PREFACE: 11th Asia-Pacific Conference on Plasma Science and Technology (APCPST-11) and 25th Symposium on Plasma Science for Materials (SPSM-25)

    Science.gov (United States)

    Watanabe, Takayuki; Kaneko, Toshio; Sekine, Makoto; Tanaka, Yasunori

    2013-06-01

    The 11th Asia-Pacific Conference on Plasma Science and Technology (APCPST-11) was held in Kyoto, Japan on 2-5 October 2012 with the 25th Symposium on Plasma Science for Materials (SPSM-25). SPSM has been held annually since 1988 under the sponsorship of The 153rd Committee on Plasma Materials Science, Japan Society for the Promotion of Science (JSPS). This symposium is one of the major activities of the Committee, which is organized by researchers in academia and industry for the purpose of advancing intersectional scientific information exchange and discussion of science and technology of plasma materials processing. APCPST and SPSM are jointly held biennially to survey the current status of low temperature and thermal plasma physics and chemistry for industrial applications. The whole area of plasma processing was covered from fundamentals to applications. Previous meetings were held in China, Japan, Korea, and Australia, attended by scientists from the Asia-Pacific and other countries. The joint conference was organized in plenary lectures, invited, contributed oral presentations and poster sessions. At this meeting, we had 386 participants from 10 countries and 398 presentations, including 26 invited presentations. This year, we arranged special topical sessions that covered green innovation, life innovation, and technical reports from industry. This conference seeks to bring the plasma community together and to create a forum for discussing the latest developments and issues, the challenges ahead in the field of plasma research and applications among engineers and scientists in Asia, the Pacific Rim, as well as Europe. This volume presents 44 papers that were selected via a strict peer-review process from full papers submitted for the proceedings of the conference. The topics range from the basic physics and chemistry of plasma processing to a broad variety of materials processing and environmental applications. This volume offers an overview of recent

  19. Green Materials Science and Engineering Reduces Biofouling: Approaches for Medical and Membrane-based Technologies

    Directory of Open Access Journals (Sweden)

    Kerianne M Dobosz

    2015-03-01

    Full Text Available Numerous engineered and natural environments suffer deleterious effects from biofouling and/or biofilm formation. For instance, bacterial contamination on biomedical devices pose serious health concerns. In membrane-based technologies, such as desalination and wastewater reuse, biofouling decreases membrane lifetime and increases the energy required to produce clean water. Traditionally, approaches have combatted bacteria using bactericidal agents. However, due to globalization, a decline in antibiotic discovery, and the widespread resistance of microbes to many commercial antibiotics and metallic nanoparticles, new materials and approaches to reduce biofilm formation are needed. In this mini-review, we cover the recent strategies that have been explored to combat microbial contamination without exerting evolutionary pressure on microorganisms. Renewable feedstocks, relying on structure-property relationships, bioinspired/nature-derived compounds, and green processing methods are discussed. Greener strategies that mitigate biofouling hold great potential to positively impact human health and safety.

  20. Green materials science and engineering reduces biofouling: approaches for medical and membrane-based technologies.

    Science.gov (United States)

    Dobosz, Kerianne M; Kolewe, Kristopher W; Schiffman, Jessica D

    2015-01-01

    Numerous engineered and natural environments suffer deleterious effects from biofouling and/or biofilm formation. For instance, bacterial contamination on biomedical devices pose serious health concerns. In membrane-based technologies, such as desalination and wastewater reuse, biofouling decreases membrane lifetime, and increases the energy required to produce clean water. Traditionally, approaches have combatted bacteria using bactericidal agents. However, due to globalization, a decline in antibiotic discovery, and the widespread resistance of microbes to many commercial antibiotics and metallic nanoparticles, new materials, and approaches to reduce biofilm formation are needed. In this mini-review, we cover the recent strategies that have been explored to combat microbial contamination without exerting evolutionary pressure on microorganisms. Renewable feedstocks, relying on structure-property relationships, bioinspired/nature-derived compounds, and green processing methods are discussed. Greener strategies that mitigate biofouling hold great potential to positively impact human health and safety.

  1. Green materials science and engineering reduces biofouling: approaches for medical and membrane-based technologies

    Science.gov (United States)

    Dobosz, Kerianne M.; Kolewe, Kristopher W.; Schiffman, Jessica D.

    2015-01-01

    Numerous engineered and natural environments suffer deleterious effects from biofouling and/or biofilm formation. For instance, bacterial contamination on biomedical devices pose serious health concerns. In membrane-based technologies, such as desalination and wastewater reuse, biofouling decreases membrane lifetime, and increases the energy required to produce clean water. Traditionally, approaches have combatted bacteria using bactericidal agents. However, due to globalization, a decline in antibiotic discovery, and the widespread resistance of microbes to many commercial antibiotics and metallic nanoparticles, new materials, and approaches to reduce biofilm formation are needed. In this mini-review, we cover the recent strategies that have been explored to combat microbial contamination without exerting evolutionary pressure on microorganisms. Renewable feedstocks, relying on structure-property relationships, bioinspired/nature-derived compounds, and green processing methods are discussed. Greener strategies that mitigate biofouling hold great potential to positively impact human health and safety. PMID:25852659

  2. Mechanics for materials and technologies

    CERN Document Server

    Goldstein, Robert; Murashkin, Evgenii

    2017-01-01

    This book shows impressively how complex mathematical modeling of materials can be applied to technological problems. Top-class researchers present the theoretical approaches in modern mechanics and apply them to real-world problems in solid mechanics, creep, plasticity, fracture, impact, and friction. They show how they can be applied to technological challenges in various fields like aerospace technology, biological sciences and modern engineering materials.

  3. Sharing Science and Technology.

    Science.gov (United States)

    Morgan, Robert P.

    1983-01-01

    Defining development as some combination of improving the standard of living and quality of life, meeting basic needs, and increasing per capita gross national product, this article discusses the role science and technology can play in developing countries. Considers technology transfer, appropriate technology, and other issues. (JN)

  4. Rudiments of materials science

    CERN Document Server

    Pillai, SO

    2007-01-01

    Writing a comprehensive book on Materials Science for the benefit of undergraduate courses in Science and Engineering was a day dream of the first author, Dr. S.O. Pillai for a long period. However, the dream became true after a lapse of couple of years. Lucid and logical exposition of the subject matter is the special feature of this book.

  5. Materials Science Laboratory

    Science.gov (United States)

    Jackson, Dionne

    2005-01-01

    The NASA Materials Science Laboratory (MSL) provides science and engineering services to NASA and Contractor customers at KSC, including those working for the Space Shuttle. International Space Station. and Launch Services Programs. These services include: (1) Independent/unbiased failure analysis (2) Support to Accident/Mishap Investigation Boards (3) Materials testing and evaluation (4) Materials and Processes (M&P) engineering consultation (5) Metrology (6) Chemical analysis (including ID of unknown materials) (7) Mechanical design and fabrication We provide unique solutions to unusual and urgent problems associated with aerospace flight hardware, ground support equipment and related facilities.

  6. Materials science and engineering

    Energy Technology Data Exchange (ETDEWEB)

    Lesuer, D.R.

    1997-02-01

    During FY-96, work within the Materials Science and Engineering Thrust Area was focused on material modeling. Our motivation for this work is to develop the capability to study the structural response of materials as well as material processing. These capabilities have been applied to a broad range of problems, in support of many programs at Lawrence Livermore National Laboratory. These studies are described in (1) Strength and Fracture Toughness of Material Interfaces; (2) Damage Evolution in Fiber Composite Materials; (3) Flashlamp Envelope Optical Properties and Failure Analysis; (4) Synthesis and Processing of Nanocrystalline Hydroxyapatite; and (5) Room Temperature Creep Compliance of Bulk Kel-E.

  7. Science & Technology Review March 2005

    Energy Technology Data Exchange (ETDEWEB)

    Henson, V E

    2005-01-25

    This issue of Science and Technology Review has the following articles: (1) Enhanced National Security through International Research Collaborations--Commentary by Stephen G. Cochran; (2) Building Networks of Trust through Collaborative Science--Livermore scientists are leading collaborative science and technology projects with colleagues from Central and South Asia and the Middle East; (3) Tracing the Steps in Nuclear Material Trafficking--The Laboratory.s nuclear science expertise is helping to thwart the illicit trafficking of nuclear material; (4) Looking at Earth in Action--Geophysicists at Livermore are using laboratory experiments to examine such issues as how best to store nuclear wastes and how to mitigate the effects of greenhouse gases; and (5) Gamma-Ray Bursts Shower the Universe with Metals--Computer models indicate that gamma-ray bursts from dying stars may be important sources of elements such as iron, zinc, titanium, and copper.

  8. Materials science and engineering

    Energy Technology Data Exchange (ETDEWEB)

    Holden, T.M.

    1995-10-01

    The science-based stockpile stewardship program emphasizes a better understanding of how complex components function through advanced computer calculations. Many of the problem areas are in the behavior of materials making up the equipment. The Los Alamos Neutron Science Center (LANSCE) can contribute to solving these problems by providing diagnostic tools to examine parts noninvasively and by providing the experimental tools to understand material behavior in terms of both the atomic structure and the microstructure. Advanced computer codes need experimental information on material behavior in response to stress, temperature, and pressure as input, and they need benchmarking experiments to test the model predictions for the finished part.

  9. Towards possible opportunities in nuclear materials science and technology at an X-ray free electron laser research facility

    Science.gov (United States)

    Froideval, A.; Badillo, A.; Bertsch, J.; Churakov, S.; Dähn, R.; Degueldre, C.; Lind, T.; Paladino, D.; Patterson, B. D.

    2011-09-01

    Spectroscopy and imaging of condensed matter have benefited greatly from the availability of intense X-ray beams from synchrotron sources, both in terms of spatial resolution and of elemental specificity. The advent of the X-ray free electron laser (X-ray FEL) provides the additional features of ultra-short pulses and high transverse coherence, which greatly expand possibilities to study dynamic processes and to image non-crystalline materials. The proposed SwissFEL facility at the Paul Scherrer Institute is one of at present four X-ray FEL projects worldwide and is scheduled to go into operation in the year 2017. This article describes a selection of problems in nuclear materials science and technology that would directly benefit from this and similar X-ray FEL sources. X-ray FEL-based experiments are proposed to be conducted on nuclear energy-related materials using single-shot X-ray spectroscopy, coherent X-ray scattering and/or X-ray photon correlation spectroscopy in order to address relevant scientific questions such as the evolution in time of the irradiation-induced damage processes, the deformation processes in nuclear materials, the ion diffusion processes in the barrier systems of geological repositories, the boiling heat transfer in nuclear reactors, as well as the structural characterization of graphite dust in advanced nuclear reactors and clay colloid aggregates in the groundwater near a radioactive waste repository.

  10. Aerospace materials and material technologies

    CERN Document Server

    Wanhill, R

    2017-01-01

    This book is a comprehensive compilation of chapters on materials (both established and evolving) and material technologies that are important for aerospace systems. It considers aerospace materials in three Parts. Part I covers Metallic Materials (Mg, Al, Al-Li, Ti, aero steels, Ni, intermetallics, bronzes and Nb alloys); Part II deals with Composites (GLARE, PMCs, CMCs and Carbon based CMCs); and Part III considers Special Materials. This compilation has ensured that no important aerospace material system is ignored. Emphasis is laid in each chapter on the underlying scientific principles as well as basic and fundamental mechanisms leading to processing, characterization, property evaluation and applications. A considerable amount of materials data is compiled and presented in appendices at the end of the book. This book will be useful to students, researchers and professionals working in the domain of aerospace materials.

  11. National Educators' Workshop: Update 1991. Standard Experiments in Engineering Materials Science and Technology

    Science.gov (United States)

    Gardner, James E. (Compiler); Jacobs, James A. (Compiler); Stiegler, James O. (Compiler)

    1992-01-01

    Given here is a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 91, held at the Oak Ridge National Laboratory on November 12-14, 1991. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.

  12. Advances in science and technology of modern energetic materials: an overview.

    Science.gov (United States)

    Badgujar, D M; Talawar, M B; Asthana, S N; Mahulikar, P P

    2008-03-01

    Energetic materials such as explosives, propellants and pyrotechnics are widely used for both civilian and military explosives applications. The present review focuses briefly on the synthesis aspects and some of the physico-chemical properties of energetic materials of the class: (a) aminopyridine-N-oxides, (b) energetic azides, (c) high nitrogen content energetic materials, (d) imidazoles, (e) insensitive energetic materials, (f) oxidizers, (g) nitramines, (h) nitrate esters and (i) thermally stable explosives. A brief comment is also made on the emerging nitration concepts. This paper also reviews work done on primary explosives of current and futuristic interest based on energetic co-ordination compounds. Lead-free co-ordination compounds are the candidates of tomorrow's choice in view of their additional advantage of being eco-friendly. Another desirable attribute of lead free class of energetic compounds is the presence of almost equivalent quantity of fuel and oxidizer moieties. These compounds may find wide spectrum of futuristic applications in the area of energetic materials. The over all aim of the high energy materials research community is to develop the more powerful energetic materials/explosive formulations/propellant formulations in comparison to currently known benchmark materials/compositions. Therefore, an attempt is also made to highlight the important contributions made by the various researchers in the frontier areas energetic ballistic modifiers, energetic binders and energetic plasticizers.

  13. National Educators' Workshop: Update 1997. Standard Experiments in Engineering Materials, Science, and Technology

    Science.gov (United States)

    Gardner, James E. (Compiler); Freeman, Ginger L. (Compiler); Jacobs, James A. (Compiler); Miller, Alan G. (Compiler); Smith, Brian W. (Compiler)

    1998-01-01

    This document contains a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 97, held at Boeing Commercial Airplane Group, Seattle, Washington, on November 2-5, 1997. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.

  14. National Educators' Workshop: Update 1993. Standard Experiments in Engineering Materials Science and Technology

    Science.gov (United States)

    Gardner, James E. (Compiler); Jacobs, James A. (Compiler)

    1994-01-01

    This document contains a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 93 held at the NASA Langley Research Center in Hampton, Virginia, on November 3-5, 1993. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.

  15. National Educators' Workshop: Update 95. Standard Experiments in Engineering Materials Science and Technology

    Science.gov (United States)

    Gardner, James E. (Compiler); Jacobs, James A.; Karnitz, Michael A.

    1996-01-01

    This document contains a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 95. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.

  16. National Educators' Workshop: Update 2002 - Standard Experiments in Engineering, Materials Science, and Technology

    Science.gov (United States)

    Prior, Edwin J. (Compiler); Jacobs, James A. (Compiler); Chung, W. Richard (Compiler)

    2003-01-01

    This document contains a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 2002 held in San Jose, California, October 13-16,2002. This publication provides experiments and demonstrations that can serve as a valuable guide to faculty who are interested in useful activities for their students. The material was the result of years of research aimed at better methods of teaching technical subjects. The experiments developed by faculty, scientists, and engineers throughout the United States and abroad add to the collection from past workshops. They include a blend of experiments on new materials and traditional materials.

  17. Materials sciences programs, Fiscal year 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    The Division of Materials Sciences is responsible for basic research and research facilities in materials science topics important to the mission of the Department of Energy. The programmatic divisions under the Office of Basic Energy Sciences are Chemical Sciences, Engineering and Geosciences, and Energy Biosciences. Materials Science is an enabling technology. The performance parameters, economics, environmental acceptability and safety of all energy generation, conversion, transmission and conservation technologies are limited by the properties and behavior of materials. The Materials Sciences programs develop scientific understanding of the synergistic relationship among synthesis, processing, structure, properties, behavior, performance and other characteristics of materials. Emphasis is placed on the development of the capability to discover technologically, economically, and environmentally desirable new materials and processes, and the instruments and national user facilities necessary for achieving such progress. Materials Sciences subfields include: physical metallurgy, ceramics, polymers, solid state and condensed matter physics, materials chemistry, surface science and related disciplines where the emphasis is on the science of materials. This report includes program descriptions for 517 research programs including 255 at 14 DOE National Laboratories, 262 research grants (233 of which are at universities), and 29 Small Business Innovation Research Grants. Five cross-cutting indices located at the rear of this book identify all 517 programs according to principal investigator(s), materials, techniques, phenomena, and environment.

  18. EDITORIAL: Computational materials science Computational materials science

    Science.gov (United States)

    Kahl, Gerhard; Kresse, Georg

    2011-10-01

    Special issue in honour of Jürgen Hafner On 30 September 2010, Jürgen Hafner, one of the most prominent and influential members within the solid state community, retired. His remarkably broad scientific oeuvre has made him one of the founding fathers of modern computational materials science: more than 600 scientific publications, numerous contributions to books, and a highly cited monograph, which has become a standard reference in the theory of metals, witness not only the remarkable productivity of Jürgen Hafner but also his impact in theoretical solid state physics. In an effort to duly acknowledge Jürgen Hafner's lasting impact in this field, a Festsymposium was held on 27-29 September 2010 at the Universität Wien. The organizers of this symposium (and authors of this editorial) are proud to say that a large number of highly renowned scientists in theoretical condensed matter theory—co-workers, friends and students—accepted the invitation to this celebration of Hafner's jubilee. Some of these speakers also followed our invitation to submit their contribution to this Festschrift, published in Journal of Physics: Condensed Matter, a journal which Jürgen Hafner served in 2000-2003 and 2003-2006 as a member of the Advisory Editorial Board and member of the Executive Board, respectively. In the subsequent article, Volker Heine, friend and co-worker of Jürgen Hafner over many decades, gives an account of Hafner's impact in the field of theoretical condensed matter physics. Computational materials science contents Theoretical study of structural, mechanical and spectroscopic properties of boehmite (γ-AlOOH) D Tunega, H Pašalić, M H Gerzabek and H Lischka Ethylene epoxidation catalyzed by chlorine-promoted silver oxide M O Ozbek, I Onal and R A Van Santen First-principles study of Cu2ZnSnS4 and the related band offsets for photovoltaic applicationsA Nagoya, R Asahi and G Kresse Renormalization group study of random quantum magnetsIstván A Kovács and

  19. Science and technology in the recent development of boron nitride materials

    CERN Document Server

    Fukunaga, O

    2002-01-01

    In this paper, we review recent developments relating to cubic boron nitride (cBN) abrasive grains and sintered cutting tools. The demand for high-speed machining and the ecological benefits of using ferrous materials have led to developments in the area of heavy-duty dry cutting and grinding processes in recent years. Optimization of the process of manufacturing cBN materials is an important issue, both fundamentally and as regards applications. We review recent developments in cBN applications and discuss the challenges arising from new processes encountered in basic cBN study at high pressure and high temperature.

  20. Composite materials from forest biomass : a review of current practices, science, and technology

    Science.gov (United States)

    Roger M. Rowell

    2007-01-01

    Renewable and sustainable composite materials can be produced using forest biomass if we maintain healthy forests. Small diameter trees and other forest biomass can be processed in the forest into small solid wood pieces, sliced veneers, strands, flakes, chips, particles and fiber that can be used to make construction composite products such as glued-laminated lumber,...

  1. Science and technology

    CERN Document Server

    Chorafas, Dimitris N

    2014-01-01

    The aim of this book is to explore science and technology from the viewpoint of creating new knowledge, as opposed to the reinterpretation of existing knowledge in ever greater but uncertain detail. Scientists and technologists make progress by distinguishing between what they regard as meaningful and what they consider as secondary or unimportant. The meaningful is dynamic; typically, the less important is static. Science and technology have made a major contribution to the culture and to the standard of living of our society. From antiquity to the present day, the most distinguished scientis

  2. Using materials science.

    Science.gov (United States)

    Baker, W O

    1981-01-23

    The science of the solid state has joined nuclear science and molecular biology as a field of major importance in the latter half of the 20th century. It took particular shape during the genesis of solid-state electronics and the post-transistor era of integrated circuits for telecommunications, computers, and digital signal machines. However, these developments were soon joined by techniques from the ancient fields of metallurgy and ceramics and contributions from the more current fields of synthetic polymers, rubbers, plastics, and modified bioorganic substances. This vast realm was characterized by a National Academy of Sciences study of the 1970's as "materials science and engineering." The public, as well as the scientific and engineering community, are currently concerned about the uses of research and development and the applications of knowledge for national progress. Consideration is given here to how well we are using the science of materials for industrial strength and such governmental objectives as national security and energy economy.

  3. Lasers in materials science

    CERN Document Server

    Ossi, Paolo; Zhigilei, Leonid

    2014-01-01

    This book covers various aspects of lasers in materials science, including a comprehensive overview on basic principles of laser-materials interactions and applications enabled by pulsed laser systems.  The material is organized in a coherent way, providing the reader with a harmonic architecture. While systematically covering the major current and emerging areas of lasers processing applications, the Volume provides examples of targeted modification of material properties achieved through careful control of the processing conditions and laser irradiation parameters. Special emphasis is placed on specific strategies aimed at nanoscale control of material structure and properties to match the stringent requirements of modern applications.  Laser fabrication of novel nanomaterials, which expands to the domains of photonics, photovoltaics, sensing, and biomedical applications, is also discussed in the Volume. This book assembles chapters based on lectures delivered at the Venice International School on Lasers...

  4. JPRS Report, Science & Technology, Japan, Symposium on Trends in Advanced Materials

    Science.gov (United States)

    2007-11-02

    MRI and others. This "lift off" of the superconductivity market is due to its technological advances. As long as the present costs involved in...the simple and easy to use 77K SQUID system is completed, it is expected to open up unexpected markets in the area of sporting facilities. One cannot...c -4< 4 HF4H Hrýr- -H> 4UH ci0 ~ P P C q00 C 4E1C I IW’ P4P P4 P.4 P4 P4P 4P L 4 4P4P 4P l 4P 38 GaAs/AIGaAs MQW ALL-OPTICAL SYSTEM 10’ SEMI

  5. Computer Science and Technology Board

    Energy Technology Data Exchange (ETDEWEB)

    Blumenthal, M.S.

    1990-01-01

    The Computer Science and Technology Board (CSTB) meets three times a year to consider scientific and policy issues in computer science as well as relevant problems in associated technologies. The objectives of the Board include: initiating studies involving computer science and technology as a critical national resource; responding to requests from the government, nonprofit foundations, and industry for advice on computer science and technology; promoting the health of the technology and other fields of pure and applied science and technology; and providing a base of expertise within the NRC in the area of computer science and technology.

  6. Science and technology on ceramics and cerments materials; Ceramics oyobi cermet zairyo no kagaku to gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Iwamato, N. [Osaka Univ. (Japan)

    1998-03-31

    Applications of ceramics coat and cerment coat are being rapidly improved with the development of VSOP. But, while forming a spraying coat, there are many working factors such as powder ingredients, coat forming conditions, compatibility of the spraying coat with the substrate, and individually particular problems concerning properties, hollowness microstructure and sticking strength to the substrate of the spraying coat have to be solved. In this paper, the history of development of cerment and bulk materials and the problems thereof are described. Influences on shapes and mechanical properties of compound particles, wettability of compound with the spraying metal, and generation of {eta}(Co6W6C) in the WC-Co alloy are pointed out as the problems. Then, the application field of the cerment and bulk materials is introduced. At last, as the recent development of cerment coat engineering, WC coat, WC-Co coat, diamond coat and TiC coat by using the CVD or PVD process are described. 34 refs.,4 figs., 2 tabs.

  7. Science, Technology and Society

    Science.gov (United States)

    Bridgstock, Martin; Burch, David; Forge, John; Laurent, John; Lowe, Ian

    1998-03-01

    This book provides a comprehensive introduction to the human, social and economic aspects of science and technology. It examines a broad range of issues from a variety of perspectives, using examples and experiences from around the world. The authors present complex issues, including the responsibilities of scientists, ethical dilemmas and controversies, the Industrial Revolution, economic issues, public policy, and science and technology in developing countries. The book ends with a thoughtful and provocative look toward the future. It features extensive guides to further reading, as well as a useful section on information searching skills. This book will provoke, engage, inform and stimulate thoughtful discussion about culture, society and science. Broad and interdisciplinary, it will be of considerable value to both students and teachers.

  8. Use of Video Technology for Lecture and Lab Material in Introductory Earth Science

    Science.gov (United States)

    Shorey, C. V.

    2008-12-01

    Still images are essential to teaching introductory geology courses, but video has traditionally been relegated a minor role. When creatively integrated with lecture material, video can provide a better perspective on spatial scales and relationships between static geologic locations, or to demonstrate evolving processes with much greater economy. With the use of appropriate editing software, events can be temporally compressed and dilated to give a more visceral experience to processes described in labs and lectures. Video can also be used as a form of virtual field trip for students to see a more wide ranging sample of locations, and such virtual field trips can deliver comparable experiences for students with physical disabilities that may limit their ability to visit the locations their fellow students attend.

  9. National Educators' Workshop: Update 2003. Standard Experiments in Engineering, Materials Science, and Technology. Part 1

    Science.gov (United States)

    Prior, Edwin J. (Compiler); Jacobs, James A. (Compiler); Edmonson, William (Compiler); Wilkerson, Amy (Compiler)

    2004-01-01

    The 18th Annual National Educators Workshop [NEW:Update 2003] was a part of NASA Langley s celebration of the Centennial of Controlled, Powered Flight by Orville and Wilbur Wright on December 17, 1903. The conference proceedings from NEW:Update 2003 reflect the Flight 100 theme by first providing a historic perspective on the remarkable accomplishments of the Wright Brothers. The historical perspective set the stag for insights into aeronautics and aerospace structures and materials now and into the future. The NEW:Update 2003 proceedings provide valuable resources to educators and students in the form of visuals, experiments and demonstrations for classes/labs at levels ranging from precollege through college education.

  10. National Educators' Workshop: Update 2003. Standard Experiments in Engineering, Materials Science, and Technology. Part 2

    Science.gov (United States)

    Prior, Edwin J. (Compiler); Jacobs, James A. (Compiler); Edmonson, William (Compiler); Wilkerson, Amy (Compiler)

    2004-01-01

    The 18th Annual National Educators Workshop [NEW:Update 2003] was a part of NASA Langley s celebration of the Centennial of Controlled, Powered Flight by Orville and Wilbur Wright on December 17, 1903. The conference proceedings from NEW:Update 2003 reflect the Flight 100 theme by first providing a historic perspective on the remarkable accomplishments of the Wright Brothers. The historical perspective set the stag for insights into aeronautics and aerospace structures and materials now and into the future. The NEW:Update 2003 proceedings provide valuable resources to educators and students in the form of visuals, experiments and demonstrations for classes/labs at levels ranging from precollege through college education.

  11. NATO Advanced Study Institute and International School of Materials Science and Technology

    CERN Document Server

    Balkanski, Minko; 15th Course on Solid State Microbatteries

    1990-01-01

    This Advanced Study Institute on the topic of SOLID STATE MICROBATTERIES is the third and final institute on the general theme of a field of study now termed "SOLID STATE IONICS". The institute was held in Erice, Sicily, Italy, 3 - 15 July 1988. The objective was to assemble in one location individuals from industry and academia expert in the fields of microelectronics and solid state ionics to determine the feasibility of merging a solid state microbattery with microelectronic memory. Solid electrolytes are in principle amenable to vapor deposition, RF or DC sputtering, and other techniques used to fabricate microelectronic components. A solid state microbattery 1 1 mated on the same chip carrier as the chip can provide on board memory backup power. A solid state microbattery assembled from properly selected anode/solid electrolyte/cathode materials could have environmental endurance properties equal or superior to semiconductor memory chips. Lectures covering microelectronics, present state-of-art solid sta...

  12. Technologies for Medical Sciences

    CERN Document Server

    Tavares, João; Barbosa, Marcos; Slade, AP

    2012-01-01

    This book presents novel and advanced technologies for medical sciences in order to solidify knowledge in the related fields and define their key stakeholders.   The fifteen papers included in this book were written by invited experts of international stature and address important technologies for medical sciences, including: computational modeling and simulation, image processing and analysis, medical imaging, human motion and posture, tissue engineering, design and development medical devices, and mechanic biology. Different applications are treated in such diverse fields as biomechanical studies, prosthesis and orthosis, medical diagnosis, sport, and virtual reality.   This book is of interest to researchers, students and manufacturers from  a wide range of disciplines related to bioengineering, biomechanics, computational mechanics, computational vision, human motion, mathematics, medical devices, medical image, medicine and physics.

  13. Materials Science and Technology, Volume 14, Materials Science and Technology A Comprehensive Treatment - Volume 14: Medical and Dental Materials Cahn,R.W.(ed.)/Haasen,P.(ed.)/Kramer,E.J.(ed.)

    Science.gov (United States)

    Williams, David F.

    1996-12-01

    The applications of metals, ceramics, and polymers in medical and dental engineering is becoming ever more widespread. Technologists in these fields are provided with a unique overview of materials, performances and applications. From the Contents: Williams: Biofunctionality and Biocompatibility. Kohn/Ducheyne: Materials for Bone and Joint Replacement. Baquey: Materials in the Cardiovascular System. Aebischer/Goddard/ Galletti/ Lysaght: Biomaterials and Artificial Organs. Yannas: Materials for Skin and Nerve Regeneration. Watts: Dental Restorative Materials. Williams: Materials for Oral and Maxillofacial Surgery/Materials for Ophthalmology. Causton: Medical and Dental Adhesives. Reichert/Saavedra: Materials Consideration in the Selection, Performance, and Adhesion of Polymeric Encapsulants for Implantable Sensors. Campbell/Jones: Materials for Implantable Electrodes and Electronic Devices. Brunstedt/Anderson: Materials for Drug Delivery. Jones: Materials for Fixed and Removable Prosthodontics.

  14. Panel 3 - material science

    Energy Technology Data Exchange (ETDEWEB)

    Sarrao, John L [Los Alamos National Laboratory; Yip, Sidney [MIT

    2010-01-01

    In the last decades, NNSA's national security challenge has evolved, and the role of simulation and computation has grown dramatically. The process of certifying nuclear weapons performance has changed from one based on integrated tests to science-based certification in which underground nuclear tests have been replaced by large-scale simulations, appropriately validated with fundamental experimental data. Further, the breadth of national security challenges has expanded beyond stewardship of a nuclear deterrent to a broad range of global and asymmetric threats. Materials challenges are central to the full suite of these national security challenges. Mission requirements demand that materials perform predictably in extreme environments -- high pressure, high strain rate, and hostile irradiation and chemical conditions. Considerable advances have been made in incorporating fundamental materials physics into integrated codes used for component certification. On the other hand, significant uncertainties still remain, and materials properties, especially at the mesoscale, are key to understanding uncertainties that remain in integrated weapons performance codes and that at present are treated as empirical knobs. Further, additional national security mission challenges could be addressed more robustly with new and higher performing materials.

  15. Nuclear science and technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    The Program on Nuclear Science and Technology comprehends Nuclear and Condensed Matter Physics, Neutron Activation Analysis, Radiation Metrology, Radioprotection and Radioactive Waste Management. These activities are developed at the Research Reactor Center, the Radiation Metrology Center and the Radioactive Waste Management Laboratory. The Radioprotection activities are developed at all radioactive and nuclear facilities of IPEN-CNEN/SP. The Research Reactor Center at IPEN-CNEN/SP is responsible for the operation and maintenance of the Research Reactor IEA-R1 and has a three-fold mission: promoting basic and applied research in nuclear and neutron related sciences, providing educational opportunities for students in these fields and providing services and applications resulting from the reactor utilization. Specific research programs include nuclear structure study from beta and gamma decay of radioactive nuclei and nuclear reactions, nuclear and neutron metrology, neutron diffraction and neutron multiple-diffraction study for crystalline and magnetic structure determination, perturbed -angular correlation (PAC) using radioactive nuclear probes to study the nuclear hyperfine interactions in solids and instrumental neutron activation analysis, with comparative or ko standardization applied to the fields of health, agriculture, environment, archaeology, reference material production, geology and industry. The research in the areas of applied physics includes neutron radiography, scientific computation and nuclear instrumentation. During the last several years a special effort was made to refurbish the old components and systems of the reactor, particularly those related with the reactor safety improvement, in order to upgrade the reactor power. The primary objective was to modernize the IEA-R1 reactor for safe and sustainable operation to produce primary radioisotopes, such as {sup 99}Mo and {sup 131}I, among several others, used in nuclear medicine, by operating

  16. Materials sciences programs: Fiscal year 1994

    Science.gov (United States)

    1995-04-01

    The Division of Materials Sciences is located within the DOE in the Office of Basic Energy Sciences. The Division of Materials Sciences is responsible for basic research and research facilities in strategic materials science topics of critical importance to the mission of the Department and its Strategic Plan. Materials Science is an enabling technology. The performance parameters, economics, environmental acceptability and safety of all energy generation, conversion, transmission and conservation technologies are limited by the properties and behavior of materials. The Materials Sciences programs develop scientific understanding of the synergistic relationship amongst the synthesis, processing, structure, properties, behavior, performance and other characteristics of materials. Emphasis is placed on the development of the capability to discover technologically, economically, and environmentally desirable new materials and processes, and the instruments and national user facilities necessary for achieving such progress. Materials Sciences sub-fields include physical metallurgy, ceramics, polymers, solid state and condensed matter physics, materials chemistry, surface science and related disciplines where the emphasis is on the science of materials. This report includes program descriptions for 458 research programs including 216 at 14 DOE National Laboratories, 242 research grants (233 for universities), and 9 Small Business Innovation Research (SBIR) Grants. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the SBIR Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F contains descriptions of other user facilities; G, a summary of funding levels; and H, indices characterizing research projects.

  17. Materials sciences programs, fiscal year 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    The Division of Materials Sciences is located within the DOE in the Office of Basic Energy Sciences. The Division of Materials Sciences is responsible for basic research and research facilities in strategic materials science topics of critical importance to the mission of the Department and its Strategic Plan. Materials Science is an enabling technology. The performance parameters, economics, environmental acceptability and safety of all energy generation, conversion, transmission and conservation technologies are limited by the properties and behavior of materials. The Materials Sciences programs develop scientific understanding of the synergistic relationship amongst the synthesis, processing, structure, properties, behavior, performance and other characteristics of materials. Emphasis is placed on the development of the capability to discover technologically, economically, and environmentally desirable new materials and processes, and the instruments and national user facilities necessary for achieving such progress. Materials Sciences sub-fields include physical metallurgy, ceramics, polymers, solid state and condensed matter physics, materials chemistry, surface science and related disciplines where the emphasis is on the science of materials. This report includes program descriptions for 458 research programs including 216 at 14 DOE National Laboratories, 242 research grants (233 for universities), and 9 Small Business Innovation Research (SBIR) Grants. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the SBIR Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F contains descriptions of other user facilities; G, a summary of funding levels; and H, indices characterizing research projects.

  18. The global politics of science and technology

    CERN Document Server

    Carpes, Mariana; Knoblich, Ruth

    2014-01-01

    An increasing number of scholars have begun to see science and technology as relevant issues in International Relations (IR), acknowledging the impact of material elements, technical instruments, and scientific practices on international security, statehood, and global governance. This two-volume collection brings the debate about science and technology to the center of International Relations. It shows how integrating science and technology translates into novel analytical frameworks, conceptual approaches and empirical puzzles, and thereby offers a state-of-the-art review of various methodological and theoretical ways in which sciences and technologies matter for the study of international affairs and world politics. The authors not only offer a set of practical examples of research frameworks for experts and students alike, but also propose a conceptual space for interdisciplinary learning in order to improve our understanding of the global politics of science and technology.

  19. Computer science and technologies

    Energy Technology Data Exchange (ETDEWEB)

    Kitagawa, T.

    1988-01-01

    This volume aims to provide up-to-date information on recent research and development in computer science and technology in Japan. In view of the rapid developments in these fields and the urgent demand for more detailed information about Japanese activities and achievements, it has been decided to concentrate on only a few selected topics in each volume. The topics covered will change each year so as to obtain adequate coverage of a broad range of activities over a period of a few years. This edition should not only contribute to the international understanding of technical developments in Japan, but also shed light on the cultural background to these theoretical and practical developments.

  20. Physics and technology of nuclear materials

    CERN Document Server

    Ursu, Ioan

    2015-01-01

    Physics and Technology of Nuclear Materials presents basic information regarding the structure, properties, processing methods, and response to irradiation of the key materials that fission and fusion nuclear reactors have to rely upon. Organized into 12 chapters, this book begins with selectively several fundamentals of nuclear physics. Subsequent chapters focus on the nuclear materials science; nuclear fuel; structural materials; moderator materials employed to """"slow down"""" fission neutrons; and neutron highly absorbent materials that serve in reactor's power control. Other chapters exp

  1. Science & Technology Review October 2005

    Energy Technology Data Exchange (ETDEWEB)

    Aufderheide III, M B

    2005-08-22

    This month's issue has the following articles: (1) Important Missions, Great Science, and Innovative Technology--Commentary by Cherry A. Murray; (2) NanoFoil{reg_sign} Solders with Less Heat--Soldering and brazing to join an array of materials are now Soldering and brazing to join an array of materials are now possible without furnaces, torches, or lead; (3) Detecting Radiation on the Move--An award-winning technology can detect even small amounts An award-winning technology can detect even small amounts of radioactive material in transit; (4) Identifying Airborne Pathogens in Time to Respond--A mass spectrometer identifies airborne spores in less than A mass spectrometer identifies airborne spores in less than a minute with no false positives; (5) Picture Perfect with VisIt--The Livermore-developed software tool VisIt helps scientists The Livermore-developed software tool VisIt helps scientists visualize and analyze large data sets; (6) Revealing the Mysteries of Water--Scientists are using Livermore's Thunder supercomputer and new algorithms to understand the phases of water; and (7) Lightweight Target Generates Bright, Energetic X Rays--Livermore scientists are producing aerogel targets for use in inertial Livermore scientists are producing aerogel targets for use in inertial confinement fusion experiments and radiation-effects testing.

  2. JPRS Report, Science & Technology. USSR: Science & Technology Policy

    Science.gov (United States)

    2007-11-02

    Sciences. Valentin Demidovich Novikov—deputy chief of the Scientific Organization Department of the Presidium of the Ukrainian SSR Academy of Sciences...technological bureau with a pilot works of the Institute of Electronics of the Belorussian SSR Academy of Sciences. Anton Vasilyevich Demidovich —sanitary

  3. Teaching materials science and engineering

    Indian Academy of Sciences (India)

    Bernhard Ilschner

    2003-06-01

    This paper is written with the intention of simulating discussion on teaching materials science and engineering in the universities. The article illustrates the tasks, priorities, goals and means lying ahead in the teaching of materials science and engineering for a sustainable future.

  4. Physical Sciences 2007 Science & Technology Highlights

    Energy Technology Data Exchange (ETDEWEB)

    Hazi, A U

    2008-04-07

    The Physical Sciences Directorate applies frontier physics and technology to grand challenges in national security. Our highly integrated and multidisciplinary research program involves collaborations throughout Lawrence Livermore National Laboratory, the National Nuclear Security Administration, the Department of Energy, and with academic and industrial partners. The Directorate has a budget of approximately $150 million, and a staff of approximately 350 employees. Our scientists provide expertise in condensed matter and high-pressure physics, plasma physics, high-energy-density science, fusion energy science and technology, nuclear and particle physics, accelerator physics, radiation detection, optical science, biotechnology, and astrophysics. This document highlights the outstanding research and development activities in the Physical Sciences Directorate that made news in 2007. It also summarizes the awards and recognition received by members of the Directorate in 2007.

  5. Science and Technology Metrics

    Science.gov (United States)

    2005-01-01

    Analysis (1974 1994)", PSICOLOGIA CONDUCTUAL 1996, Vol 4, Iss 1, pp 111 121 Irvine, J.; Martin, B., "The Isaac Newton Telescope", Social Studies of Science...analysing 1000 articles from the Science Citation Index(R) and Social Sciences Citation Index(R) [Ali, 1993]. These articles were selected in ten...occurrences of the same keywords among the shared references. However, there are some unique differences in the science and the social science

  6. Design of Wood/Montmorillonite (MMT) Intercalation NanocompositeCollege of Material Science and Technology, Beijing Forestry University, Beijing 100083, P.R.China

    Institute of Scientific and Technical Information of China (English)

    Lü Wenhua; Zhao Guangjie

    2004-01-01

    Studying new wood composites through nano science and technology (NSC) will develop new compounding theory of wood, and accelerate the combination of new technology, wood science, material science and other disciplines. The compounding of wood and inorganic MMT on nanoscale molecular level has high potential to greatly improve the mechanical properties, fire retardance, abrasion resistance, decay resistance, dimensional stability and other properties of wood. Based on the great achievements of polymer/montmorillonite (MMT) nanocomposites, this paper reviewed nano intercalation compounding methods (i.e. in-situ intercalative polymerization and direct polymer intercalation), and discussed the structure, properties and modification of montmorillonite (MMT). According to the main chemical components and particular structure of wood, the authors discussed the liquefaction and plasticization of wood, compared the dissolvability and meltability between wood and polymer, and then systematically put forward the basic idea, technological processes and schematic diagram to prepare wood/MMT nanocomposites (WMNC). The key technology to prepare WMNC is either to introduce delaminated MMT nanolayers into wood with the help of some intermediate polymers, or to obtain liquefied wood or plasticized wood from the complicated natural composite. It is applicable and effective to realize wood/MMT nanoscale compounding with the help of proper intercalation agent and medium polymer through the proposed "one-step" or "two-step" impregnating processes.

  7. Instruments in science and technology

    NARCIS (Netherlands)

    Boon, Mieke; Olsen, Jan Kyrre Berg; Pedersen, Stig Andur; Hendricks, Vincent F.

    2009-01-01

    Modern science and technology are interwoven into a complex that is sometimes called 'techno-science': the progress of science is dependent on the sophistication of instrumentation, whereas the progress of ‘high-tech’ instruments and apparatus is dependent on scientific research. Yet, how scientific

  8. Science & Technology Review July/August 2016

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, Ramona L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, Caryn N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chinn, Ken B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-07-18

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world. In this issue for the months of July and August 2016, there are two features: one on Science and Technology in Support of Nuclear Nonproliferation, and another on Seeking Out Hidden Radioactive Materials. Then there are highlights are three research projects--on optics, plasma science, and the nature of neutrinos--along with a news section and patents and awards.

  9. WikiScience: Wikipedia for science and technology

    OpenAIRE

    Aibar Puentes, Eduard

    2015-01-01

    Peer-reviewed Presentació de la conferència "WikiScience: Wikipedia for science and technology". Presentación de la conferencia "WikiScience: Wikipedia for science and technology". Presentation of the conference "Science Wiki: Wikipedia for science and technology".

  10. Computer simulation in materials science

    Energy Technology Data Exchange (ETDEWEB)

    Arsenault, R.J.; Beeler, J.R.; Esterling, D.M.

    1988-01-01

    This book contains papers on the subject of modeling in materials science. Topics include thermodynamics of metallic solids and fluids, grain-boundary modeling, fracture from an atomistic point of view, and computer simulation of dislocations on an atomistic level.

  11. Materials- the foundation for technology revolutions

    Institute of Scientific and Technical Information of China (English)

    Zhong Lin Wang

    2011-01-01

    It is my greatest honor to learn that Professor SHI Changxu was a recipient of the China's National Top Award in Science and Technology in 2010 owing to his pioneer and strategic contributions to the development of materials in China and world. This award represents the strongest endorsement of not onlythe society to the contribution made by Professor Shi in materials,

  12. Physical foundations of materials science

    CERN Document Server

    Gottstein, Günter

    2004-01-01

    In this vivid and comprehensible introduction to materials science, the author expands the modern concepts of metal physics to formulate basic theory applicable to other engineering materials, such as ceramics and polymers. Written for engineering students and working engineers with little previous knowledge of solid-state physics, this textbook enables the reader to study more specialized and fundamental literature of materials science. Dozens of illustrative photographs, many of them Transmission Electron Microscopy images, plus line drawings, aid developing a firm appreciation of this complex topic. Hard-to-grasp terms such as "textures" are lucidly explained - not only the phenomenon itself, but also its consequences for the material properties. This excellent book makes materials science more transparent.

  13. Innovative Technologies in Science Teaching

    Science.gov (United States)

    Guerra, Cecilia; Pombo, Lucia; Moreira, Antonio

    2011-01-01

    Technology plays a crucial role in pupils' and primary teachers' lives nowadays and its use can facilitate change towards an innovative school environment. The internet, for example, can act as a platform to foster science teaching and offers a variety of opportunities for effective science learning and engaging and motivating children. But…

  14. Constructivism, Education, Science, and Technology

    Science.gov (United States)

    Boudourides, Moses A.

    2003-01-01

    The purpose of this paper is to present a brief review of the various streams of constructivism in studies of education, society, science and technology. It is intended to present a number of answers to the question (what really is constructivism?) in the context of various disciplines from the humanities and the sciences (both natural and…

  15. STEM: Science Technology Engineering Mathematics

    Science.gov (United States)

    Carnevale, Anthony P.; Smith, Nicole; Melton, Michelle

    2011-01-01

    The generative economic power and social influence of Science, Technology, Engineering, and Mathematics (STEM) has made the production of a capable science and engineering workforce a priority among business and policy leaders. They are rightly concerned that without a robust STEM workforce, the nation will become less competitive in the global…

  16. Weightless Materials Science

    Science.gov (United States)

    Curtis, Jeremy

    2012-01-01

    Gravity affects everything we do. Only in very recent years have we been able to carry out experiments in orbit around the Earth and see for the first time how things behave in its absence. This has allowed us to understand fundamental processes better and to design new materials using this knowledge. (Contains 6 figures.)

  17. Research in Materials Science

    Science.gov (United States)

    1975-05-31

    236. (1966) 836. 11. Noah Hendelsohn, S.B. Thesis, MIT (Physics, 1974) unpublished; Myron Hale Frommer , Ph.D. Thesis, MIT (Metallurgy and Materials...iiiK±\\fju\\mki^m\\IUW<MfW.imK-VlWW I 1 ■77- 12. J. Bostock, Kofi Agyeman, M.ll. Frommer , and M.L.A. MacVicar, J. Appl. Phys. 44 (1973) 5567. 13. W. N

  18. Materials Science in Ancient Rome

    CERN Document Server

    Sparavigna, Amelia Carolina

    2011-01-01

    Two books, the "De Architectura" by Vitruvius and the "Naturalis Historia" by Pliny the Elder, give us a portrait of the Materials Science, that is, the knowledge of materials, in Rome at the beginning of the Empire. Here, I am reporting some very attractive contents that we can find in these books. The reader will see the discussion proposed in fours case studies: concretes, coatings, amorphous materials and colloidal crystals, to describe them in modern words.

  19. Technothrillers and English for Science and Technology.

    Science.gov (United States)

    Diaz-Santos, Gilberto

    2000-01-01

    Focuses on a particular teaching experience where a contemporary fiction work featuring high tech has been used as a source material in English for science and technology courses, and how this approach has had a positive impact on students' motivation to learn English as well as on their overall performance in the foreign language. (Author/VWL)

  20. Science and Technology and Counterterorrism

    Energy Technology Data Exchange (ETDEWEB)

    Wadsworth, J

    2002-04-03

    Major scientific and technological breakthroughs played a pivotal role in our ability to win the Cold War. The possibility of a different type of war, in response to terrorism, has long been recognized. Indeed, countermeasures to address specific terrorist acts have been developed and are deployed, for example, at special sporting and political events. The current threat environment, however, has created an intense and compelling set of concerns; consequently, the challenge to the scientific Community to develop new concepts and products on an accelerated timeframe is clear. Also, the spectrum of terrorist threats is broad. It includes the use of conventional, chemical, biological, and nuclear and radiological weapons, not to mention cyber-based attacks. The imperatives for advances have been amplified now that attacks are clearly possible within the U.S. borders. For example, advanced sensors and detectors that are able to monitor the proliferation of all the above warfare agents and their movement at entry points into the U.S. are clearly needed. The investments over the last decades in research and development efforts at the U.S. Department of Energy (DOE) national laboratories in nonproliferation have led unique technologies and detection capabilities that have proved useful; yet, many challenges remain. In particular, the development of accurate, robust, and low cost techniques that are easily deployable by first responders, law enforcement agencies, and military personnel is urgently needed. Advancements are needed in radiation, nuclear proliferation, and next-generation biological detection, as well as photonics and optics for global surveillance, information. science to convert data into useful forms, and forensic attribution. Current research and development efforts highlighting technical challenges, especially to the materials science community, will be presented.

  1. JPRS Report, Science & Technology, China

    Science.gov (United States)

    2007-11-02

    engaged in struggling for themselves and probing their own industry. E. Our modern biotechnology industry is still in the sprouting stage To date...China’s modern biotechnology industry At present, we should first of all use product varieties that have already been developed in China and where we...microelectronics, computer science, materials science, fermentation engineering, and other applied sciences. Similarly, as a biotechnology industry , its

  2. Microgravity Materials Science Conference 2000. Volume 3

    Science.gov (United States)

    Ramachandran, Narayanan; Bennett, Nancy; McCauley, Dannah; Murphy, Karen; Poindexter, Samantha

    2001-01-01

    This is Volume 3 of 3 of the 2000 Microgravity Materials Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the Microgravity materials science discipline. The microgravity science program sponsored 200 investigators, all of whom made oral or poster presentations at this conference- In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference was to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in material,, science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance was close

  3. Microgravity Materials Science Conference 2000. Volume 2

    Science.gov (United States)

    Ramachandran, Narayanan (Editor); Bennett, Nancy (Editor); McCauley, Dannah (Editor); Murphy, Karen (Editor); Poindexter, Samantha (Editor)

    2001-01-01

    This is Volume 2 of 3 of the 2000 Microgravity Materials Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the Microgravity materials science discipline. The microgravity science program sponsored approx. 200 investigators, all of whom made oral or poster presentations at this conference- In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference %%,its to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in material,, science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance

  4. Microgravity Materials Science Conference 2000. Volume 1

    Science.gov (United States)

    Ramachandran, Narayanan (Editor); Bennett, Nancy (Editor); McCauley, Dannah (Editor); Murphy, Karen (Editor); Poindexter, Samantha (Editor)

    2001-01-01

    This is Volume 1 of 3 of the 2000 Microgravity Material Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the microgravity materials science discipline. The microgravity science program sponsored approx. 200 investigators, all of whom made oral or poster presentations at this conference. In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference was to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in materials science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance was

  5. Science & Technology Review June 2016

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, Ramona L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chinn, Ken B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotta, Paul [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, Caryn N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-06-01

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

  6. Science & Technology Review June 2007

    Energy Technology Data Exchange (ETDEWEB)

    Chinn, D J

    2007-04-30

    Lawrence Livermore National Laboratory is operated by the University of California for the Department of Energy's National Nuclear Security Administration. At Livermore, we focus science and technology on ensuring our nation's security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published 10 times a year to communicate, to a broad audience, the Laboratory's scientific and technological accomplishments in fulfilling its primary missions. The publication's goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

  7. Material Science Smart Coatings

    Energy Technology Data Exchange (ETDEWEB)

    Rubinstein, A. I. [Univ. of Nebraska Medical Center, Omaha, NE (United States); Sabirianov, R. F. [Univ. of Nebraska Medical Center, Omaha, NE (United States); Namavar, Fereydoon [Univ. of Nebraska Medical Center, Omaha, NE (United States)

    2014-07-01

    The contribution of electrostatic interactions to the free energy of binding between model protein and a ceramic implant surface in the aqueous solvent, considered in the framework of the nonlocal electrostatic model, is calculated as a function of the implant low-frequency dielectric constant. We show that the existence of a dynamically ordered (low-dielectric) interfacial solvent layer at the protein-solvent and ceramic-solvent interface markedly increases charging energy of the protein and ceramic implant, and consequently makes the electrostatic contribution to the protein-ceramic binding energy more favorable (attractive). Our analysis shows that the corresponding electrostatic energy between protein and oxide ceramics depends nonmonotonically on the dielectric constant of ceramic, εC. Obtained results indicate that protein can attract electrostatically to the surface if ceramic material has a moderate εC below or about 35 (in particularly ZrO2 or Ta2O5). This is in contrast to classical (local) consideration of the solvent, which demonstrates an unfavorable electrostatic interaction of protein with typical metal oxide ceramic materialsC>10). Thus, a solid implant coated by combining oxide ceramic with a reduced dielectric constant can be beneficial to strengthen the electrostatic binding of the protein-implant complex.

  8. Science, technology and the ‘grand challenge’ of ageing—Understanding the socio-material constitution of later life : Science, Technology and the “Grand Challenge” of Ageing

    NARCIS (Netherlands)

    Peine, Alex|info:eu-repo/dai/nl/314407243; Faulkner, Alex; Jæger, Birgit; Moors, Ellen|info:eu-repo/dai/nl/20241664X

    2015-01-01

    Abstract In this paper, we introduce the themes addressed and the approaches used in this special issue. We start by briefly discussing the state of the art in research and policy making related to science, technology and ageing. We argue that an important gap characterizes this state of the art: cu

  9. Biological materials: a materials science approach.

    Science.gov (United States)

    Meyers, Marc A; Chen, Po-Yu; Lopez, Maria I; Seki, Yasuaki; Lin, Albert Y M

    2011-07-01

    The approach used by Materials Science and Engineering is revealing new aspects in the structure and properties of biological materials. The integration of advanced characterization, mechanical testing, and modeling methods can rationalize heretofore unexplained aspects of these structures. As an illustration of the power of this methodology, we apply it to biomineralized shells, avian beaks and feathers, and fish scales. We also present a few selected bioinspired applications: Velcro, an Al2O3-PMMA composite inspired by the abalone shell, and synthetic attachment devices inspired by gecko.

  10. Science and technology policy

    DEFF Research Database (Denmark)

    Who is responsible for environmental and technological policy in Denmark? And how are those "policy-makers" made accountable to the public for their decisions?   This report attempts to answer these important questions by presenting the Danish contribution to the EU-funded project, Analysing Publ...

  11. JPRS Report, Science & Technology, USSR: Science & Technology Policy

    Science.gov (United States)

    2007-11-02

    education in the country. Nothing will change, if higher educational institutions are not supplied with reagents, modern scientific and teaching ...development of science and technology. We are obligated not only to teach students to "associate" with the latest technologies, but, what is most important...physicists, process engineers, instrument makers, pro- grammers ...is needed here. All these specialists are avail- able at the institute, but they work

  12. Electrochemical Science and Technology

    CERN Document Server

    Oldham, Keith; Bond, Alan

    2011-01-01

    The book addresses the scientific principles underlying electrochemistry. Starting with the basic concepts of electricity, the early chapters discuss the physics and chemistry of the materials from which electrochemical cells are constructed and the properties that make these materials appropriate as cell components. Much of the importance of electrochemistry lies in the conversion of electrical energy into chemical energy and vice versa; the thermodynamics of these processes is described, in the context of a wide range of applications of these interconversions. An electrode is a surface at wh

  13. African Journals Online: Technology, Computer Science ...

    African Journals Online (AJOL)

    Items 1 - 29 of 29 ... The Ethiopian Journal of Science and Technology (EJST) publishes high .... Sciences is an international journal reporting significant new results in all .... general technology rocketry, space and astronomy, earth sciences, ...

  14. Materials science for nuclear detection

    Directory of Open Access Journals (Sweden)

    Anthony Peurrung

    2008-03-01

    Full Text Available The increasing importance of nuclear detection technology has led to a variety of research efforts that seek to accelerate the discovery and development of useful new radiation detection materials. These efforts aim to improve our understanding of how these materials perform, develop formalized discovery tools, and enable rapid and effective performance characterization. We provide an overview of these efforts along with an introduction to the history, physics, and taxonomy of radiation detection materials.

  15. Density functional theory in materials science.

    Science.gov (United States)

    Neugebauer, Jörg; Hickel, Tilmann

    2013-09-01

    Materials science is a highly interdisciplinary field. It is devoted to the understanding of the relationship between (a) fundamental physical and chemical properties governing processes at the atomistic scale with (b) typically macroscopic properties required of materials in engineering applications. For many materials, this relationship is not only determined by chemical composition, but strongly governed by microstructure. The latter is a consequence of carefully selected process conditions (e.g., mechanical forming and annealing in metallurgy or epitaxial growth in semiconductor technology). A key task of computational materials science is to unravel the often hidden composition-structure-property relationships using computational techniques. The present paper does not aim to give a complete review of all aspects of materials science. Rather, we will present the key concepts underlying the computation of selected material properties and discuss the major classes of materials to which they are applied. Specifically, our focus will be on methods used to describe single or polycrystalline bulk materials of semiconductor, metal or ceramic form.

  16. Science-Technology-Society or Technology-Society-Science? Insights from an Ancient Technology

    Science.gov (United States)

    Lee, Yeung Chung

    2010-01-01

    Current approaches to science-technology-society (STS) education focus primarily on the controversial socio-scientific issues that arise from the application of science in modern technology. This paper argues for an interdisciplinary approach to STS education that embraces science, technology, history, and social and cultural studies. By employing…

  17. Materials Science with Ion Beams

    CERN Document Server

    Bernas, Harry

    2010-01-01

    This book introduces materials scientists and designers, physicists and chemists to the properties of materials that can be modified by ion irradiation or implantation. These techniques can help design new materials or to test modified properties; novel applications already show that ion-beam techniques are complementary to others, yielding previously unattainable properties. Also, ion-beam interactions modify materials at the nanoscale, avoiding the often detrimental results of lithographic or chemical techniques. Here, the effects are related to better-known quasi-equilibrium thermodynamics, and the consequences to materials are discussed with concepts that are familiar to materials science. Examples addressed concern semiconductor physics, crystal and nanocluster growth, optics, magnetism, and applications to geology and biology.

  18. Technology transfer and space science missions

    Science.gov (United States)

    Acuna, Mario

    1992-01-01

    Viewgraphs on technology transfer and space science missions are provided. Topics covered include: project scientist role within NASA; role of universities in technology transfer; role of government laboratories in research; and technology issues associated with science.

  19. 76 FR 38430 - Subcommittee on Forensic Science; Committee on Science; National Science and Technology Council

    Science.gov (United States)

    2011-06-30

    ... TECHNOLOGY POLICY Subcommittee on Forensic Science; Committee on Science; National Science and Technology... ). SUMMARY: The Subcommittee on Forensic Science (SoFS) of the National Science and Technology Council's... Science can be obtained through the Office of Science and Technology Policy's NSTC Web site at:......

  20. Hydrogen storage technology materials and applications

    CERN Document Server

    Klebanoff, Lennie

    2012-01-01

    Zero-carbon, hydrogen-based power technology offers the most promising long-term solution for a secure and sustainable energy infrastructure. With contributions from the world's leading technical experts in the field, Hydrogen Storage Technology: Materials and Applications presents a broad yet unified account of the various materials science, physics, and engineering aspects involved in storing hydrogen gas so that it can be used to provide power. The book helps you understand advanced hydrogen storage materials and how to build systems around them. Accessible to nonscientists, the first chapt

  1. Science & Technology Review: September 2016

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, Ramona L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, Caryn N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chinn, Ken B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-09-30

    This is the September issue of the Lawrence Livermore National Laboratory's Science & Technology Review, which communicates, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. This month, there are features on "Laboratory Investments Drive Computational Advances" and "Laying the Groundwork for Extreme-Scale Computing." Research highlights include "Nuclear Data Moves into the 21st Century", "Peering into the Future of Lick Observatory", and "Facility Drives Hydrogen Vehicle Innovations."

  2. Setting science free from materialism.

    Science.gov (United States)

    Sheldrake, Rupert

    2013-01-01

    Contemporary science is based on the claim that all reality is material or physical. There is no reality but material reality. Consciousness is a by-product of the physical activity of the brain. Matter is unconscious. Evolution is purposeless. This view is now undergoing a credibility crunch. The biggest problem of all for materialism is the existence of consciousness. Panpsychism provides a way forward. So does the recognition that minds are not confined to brains. Copyright © 2013 Elsevier Inc. All rights reserved.

  3. Phase change materials science and applications

    CERN Document Server

    Raoux, Simone

    2009-01-01

    ""Phase Change Materials: Science and Applications"" provides a unique introduction of this rapidly developing field. This clearly written volume describes the material science of these fascinating materials from a theoretical and experimental perspective.

  4. Chemistry and Materials Science Strategic Plan

    Energy Technology Data Exchange (ETDEWEB)

    Rhodie, K B; Mailhiot, C; Eaglesham, D; Hartmann-Siantar, C L; Turpin, L S; Allen, P G

    2004-04-21

    Lawrence Livermore National Laboratory's mission is as clear today as it was in 1952 when the Laboratory was founded--to ensure our country's national security and the safety and reliability of its nuclear deterrent. As a laboratory pursuing applied science in the national interest, we strive to accomplish our mission through excellence in science and technology. We do this while developing and implementing sound and robust business practices in an environment that emphasizes security and ensures our safety and the safety of the community around us. Our mission as a directorate derives directly from the Laboratory's charter. When I accepted the assignment of Associate Director for Chemistry and Materials Science (CMS), I talked to you about the need for strategic balance and excellence in all our endeavors. We also discussed how to take the directorate to the next level. The long-range CMS strategic plan presented here was developed with this purpose in mind. It also aligns with the Lab's institutional long-range science and technology plan and its 10-year facilities and infrastructure site plan. The plan is aimed at ensuring that we fulfill our directorate's two governing principles: (1) delivering on our commitments to Laboratory programs and sponsors, and (2) anticipating change and capitalizing on opportunities through innovation in science and technology. This will require us to attain a new level of creativity, agility, and flexibility as we move forward. Moreover, a new level of engagement in partnerships with other directorates across the Laboratory as well as with universities and other national labs will also be required. The group of managers and staff that I chartered to build a strategic plan identified four organizing themes that define our directorate's work and unite our staff with a set of common goals. The plan presented here explains how we will proceed in each of these four theme areas: (1) Materials properties and

  5. Neutrons for technology and science

    Energy Technology Data Exchange (ETDEWEB)

    Aeppli, G.

    1995-10-01

    We reviewed recent work using neutrons generated at nuclear reactors an accelerator-based spallation sources. Provided that large new sources become available, neutron beams will continue to have as great an impact on technology and science as in the past.

  6. JPRS Report, Science & Technology: Europe.

    Science.gov (United States)

    2007-11-02

    NOUVELLES DE LA SCIENCE ET DES TECHNOLOGIES, Oct 87] 10 ADEBIO of France Promotes Biotechnology Industry [BIOFUTUR, Dec 87] 11 French University...25069 JPRS-EST-88-002 6 June 1988 11 WEST EUROPE ADEBIO of France Promotes Biotechnology Industry 3698a 144 Paris BIOFUTUR in French Dec 87 p 74

  7. Food Science and Technology Abstracts.

    Science.gov (United States)

    Cohen, Elinor; Federman, Joan

    1979-01-01

    Introduces the reader to the Food Science and Technology Abstracts, a data file that covers worldwide literature on human food commodities and aspects of food processing. Topics include scope, subject index, thesaurus, searching online, and abstracts; tables provide a comparison of ORBIT and DIALOG versions of the file. (JD)

  8. Governing Science, Technology and Innovation:

    DEFF Research Database (Denmark)

    Jensen, Jens Stissing

    2007-01-01

    Abstract: As an object of public management, Science, Technology and Innovation (STI) is characterised by a high level of uncertainty and complexity. The paper argues that to cope with the phenomenon of STI as a coherent area of policy formulation and regulation, a balancing of rational-, reflexive...

  9. Teaching Science with Technology

    Science.gov (United States)

    Gornostaeva, Svetlana

    2015-04-01

    This is a short introduction about me, description of different teaching methods, which is used in my teaching practice of Geography, biology and GIS systems education. The main part is tell about practical lesson with lab Vernier. My name is Svetlana Gornostaeva. I am a geography, biology and GIS systems teacher in Tallinn Mustjõe Gymnasium (www.mjg.ee) and private school Garant (http://www.erakoolgarant.ee/). In my teaching practice I do all to show that science courses are very important, interesting, and do not difficult. I use differentiated instruction methods also consider individual needs. At lessons is used different active teaching methods such as individual work of various levels of difficulty, team works, creative tasks, interactive exercises, excursions, role-playing games, meeting with experts. On my lessons I use visual aids (maps, a collection of rocks and minerals, herbarium, posters, Vernier data logger). My favorite teaching methods are excursions, meeting with experts and practical lesson with lab Vernier. A small part of my job demonstrate my poster. In the next abstract I want to bring a one practical work with Vernier which I do with my students, when we teach a theme "Atmosphere and climate". OUTDOOR LEARNING. SUBJECT "ATMOSPHERE AND CLIMATE". WEATHER OBSERVATIONS WITH VERNIER DATA LOGGER. The aim: students teach to use Vernier data logger and measure climatic parameters such as: temperature, humidity, atmospheric pressure, solar radiation, ultraviolet light radiation, wind speed. In working process pupils also teach work together, observe natural processes, analyze. Children are working by small groups, 4-5 in each group. Every one should personally measure all parameters and put numbers into the table. After it group observe cloudiness, analyze table and give conclusion "Is at this moment dominates cyclone or anticyclone ?". Children really like this kind of job. Vernier data logger it is really fantastic tool. It is mobile lab. This

  10. [Earth Science Technology Office's Computational Technologies Project

    Science.gov (United States)

    Fischer, James (Technical Monitor); Merkey, Phillip

    2005-01-01

    This grant supported the effort to characterize the problem domain of the Earth Science Technology Office's Computational Technologies Project, to engage the Beowulf Cluster Computing Community as well as the High Performance Computing Research Community so that we can predict the applicability of said technologies to the scientific community represented by the CT project and formulate long term strategies to provide the computational resources necessary to attain the anticipated scientific objectives of the CT project. Specifically, the goal of the evaluation effort is to use the information gathered over the course of the Round-3 investigations to quantify the trends in scientific expectations, the algorithmic requirements and capabilities of high-performance computers to satisfy this anticipated need.

  11. Careers in science and technology

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The objective of this book is to expose junior and senior high school students to the science and technology fields. It also will convey the importance of getting a general education in science and mathematics while still in high school and of continuing such studies in college. This is intended to encourge students, particularly underrepresented minorities and women, to consider and prepare for careers in science and technology. This book attempts to point out the increasing importance of such knowledge in daily life regardless of occupational choice. This book is intended to be used by junior and senior high school students, as a classroom reference by teachers, and by scientist and engineers participating in outreach activities.

  12. Encyclopedia of color science and technology

    CERN Document Server

    2016-01-01

    The Encyclopedia of Color Science and Technology provides an authoritative single source for understanding and applying the concepts of color to all fields of science and technology, including artistic and historical aspects of color. Many topics are discussed in this timely reference, including an introduction to the science of color, and entries on the physics, chemistry and perception of color. Color is described as it relates to optical phenomena of color and continues on through colorants and materials used to modulate color and also to human vision of color. The measurement of color is provided as is colorimetry, color spaces, color difference metrics, color appearance models, color order systems and cognitive color. Other topics discussed include industrial color, color imaging, capturing color, displaying color and printing color. Descriptions of color encodings, color management, processing color and applications relating to color synthesis for computer graphics are included in this work. The Encyclo...

  13. Materials science experiments in space

    Science.gov (United States)

    Gelles, S. H.; Giessen, B. C.; Glicksman, M. E.; Margrave, J. L.; Markovitz, H.; Nowick, A. S.; Verhoeven, J. D.; Witt, A. F.

    1978-01-01

    The criteria for the selection of the experimental areas and individual experiments were that the experiment or area must make a meaningful contribution to the field of material science and that the space environment was either an absolute requirement for the successful execution of the experiment or that the experiment can be more economically or more conveniently performed in space. A number of experimental areas and individual experiments were recommended for further consideration as space experiments. Areas not considered to be fruitful and others needing additional analysis in order to determine their suitability for conduct in space are also listed. Recommendations were made concerning the manner in which these materials science experiments are carried out and the related studies that should be pursued.

  14. Ground based materials science experiments

    Science.gov (United States)

    Meyer, M. B.; Johnston, J. C.; Glasgow, T. K.

    1988-01-01

    The facilities at the Microgravity Materials Science Laboratory (MMSL) at the Lewis Research Center, created to offer immediate and low-cost access to ground-based testing facilities for industrial, academic, and government researchers, are described. The equipment in the MMSL falls into three categories: (1) devices which emulate some aspect of low gravitational forces, (2) specialized capabilities for 1-g development and refinement of microgravity experiments, and (3) functional duplicates of flight hardware. Equipment diagrams are included.

  15. Ground based materials science experiments

    Science.gov (United States)

    Meyer, M. B.; Johnston, J. C.; Glasgow, T. K.

    1988-01-01

    The facilities at the Microgravity Materials Science Laboratory (MMSL) at the Lewis Research Center, created to offer immediate and low-cost access to ground-based testing facilities for industrial, academic, and government researchers, are described. The equipment in the MMSL falls into three categories: (1) devices which emulate some aspect of low gravitational forces, (2) specialized capabilities for 1-g development and refinement of microgravity experiments, and (3) functional duplicates of flight hardware. Equipment diagrams are included.

  16. 75 FR 4882 - Subcommittee on Forensic Science; Committee on Science; National Science and Technology Council

    Science.gov (United States)

    2010-01-29

    ... TECHNOLOGY POLICY Subcommittee on Forensic Science; Committee on Science; National Science and Technology... ). SUMMARY: The Subcommittee on Forensic Science (SOFS) of the National Science and Technology Council's... the Office of Science and Technology Policy's NSTC Web site at http://www.ostp.gov/cs/nstc or...

  17. Materials Sciences Division 1990 annual report

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-31

    This report is the Materials Sciences Division`s annual report. It contains abstracts describing materials research at the National Center for Electron Microscopy, and for research groups in metallurgy, solid-state physics, materials chemistry, electrochemical energy storage, electronic materials, surface science and catalysis, ceramic science, high tc superconductivity, polymers, composites, and high performance metals.

  18. Materials Sciences Division 1990 annual report

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    This report is the Materials Sciences Division's annual report. It contains abstracts describing materials research at the National Center for Electron Microscopy, and for research groups in metallurgy, solid-state physics, materials chemistry, electrochemical energy storage, electronic materials, surface science and catalysis, ceramic science, high tc superconductivity, polymers, composites, and high performance metals.

  19. Preservice Science Teachers' Views on Science-Technology-Society

    Science.gov (United States)

    Dikmentepe, Emel; Yakar, Zeha

    2016-01-01

    The aim of this study is to investigate the views of pre-service science teachers on Science-Technology-Society (STS). In the research, a descriptive research method was used and data were collected using the Views on Science-Technology-Society (VOSTS) Questionnaire. In general, the results of this study revealed that pre-service science teachers…

  20. [Science and technology for the new millenium].

    Science.gov (United States)

    Novo-Coronado, E

    2001-03-01

    The arrival of the new millennium move us to make a series of reflections about the status of Science and Technology in Venezuela and consequently, in Latin America. It seems that we have not understood yet, that having strong Science and Technology put us in a more advantageous position to cope with the problems related to our underdevelopment. Decisive and expeditious actions are required in Venezuela and Latin America to reduce the scientific and technological gap between developed and underdeveloped countries. These actions can be portrayed in two possible scenarios. The first one, dealing with scientific funding of basic and applied research focused on areas of critical need. Central, regional and local governments must share responsibilities for scientific development and hence, to provide appropriate funding for scientific research. The financing of personnel and the acquisition of equipment and materials for qualified scientists and research centers should be guaranteed. The second scenario deals with universities and superior education institutions which should match their curricula to contemporaneous knowledge, and to assume their role as science promoters through a creditable scientific leadership. Also, they must provide affordable opportunities for teachers and scientists to catch up with the continuing and progressive advance of science, through the establishment of inter-institutional agreements in Venezuela and abroad which would allow Venezuelan scientists to participate in joint research ventures, and therefore, to be in touch with knowledge and technologies not available in our countries.

  1. JPRS Report, Science & Technology, Japan

    Science.gov (United States)

    1988-11-10

    34Prediction and automatic measurement technologies for changes of plankton composition in the coastal areas" (budget of Y5 million through FY92), will...try to develop a system which processes information on the number and variety of plankton and is necessary for the observation of nutriment-rich...functional sheet materials to be made from acid polysaccharides, the main constituent of seaweed . As a technology to collect rare and scarce solubilized

  2. Science & Technology Review October 2007

    Energy Technology Data Exchange (ETDEWEB)

    Chinn, D J

    2007-08-21

    Livermore researchers won five R&D 100 awards in R&D Magazine's annual competition for the top 100 industrial innovations worldwide. This issue of Science & Technology Review highlights the award-winning technologies: noninvasive pneumothorax detector, microelectromechanical system-based adaptive optics scanning laser ophthalmoscope, large-area imager, hyper library of linear solvers, and continuous-phase-plate optics system manufactured using magnetorheological finishing. Since 1978, Laboratory researchers have received 118 R&D 100 awards. The R&D 100 logo (on the cover and p 1) is reprinted courtesy of R&D Magazine.

  3. JPRS Report, Science & Technology, China

    Science.gov (United States)

    2007-11-02

    Year Plan [Huang Yong; KEJI RIBAO, 25 Dec 90] ...... 7 Gene Transfer Using Ultrasound [Cheng Meimei, Hu Mucheng; KEJI RIBAO, 19 Dec 90...Beijing KEJI RIBAO [SCIENCE AND nese biotechnology development. TECHNOLOGY DAILY] in Chinese 25 Dec 90 p I Gene Transfer Using Ultrasound [Article by...transferring plant research. Among the key research results attained during genes using ultrasonic waves. The cavitation mechanism the Seventh 5-Year

  4. Journal of Science and Technology (Zambia)

    African Journals Online (AJOL)

    The University of Zambia Journal of Science and Technology provides an outlet ... of science and technology found to be relevant for national and international ... The bi-annual journal is intended, in its publications, to stimulate new research ...

  5. Communicating in English for Science and Technology

    DEFF Research Database (Denmark)

    Mousten, Birthe

    Communicating in English for Science and Technology covers some of the most important questions in connection with communication models, stylistics and genre conventions within the area of English used in science and technology texts. Moreover,knowledge management, terminology management...

  6. Journal of Applied Science, Engineering and Technology

    African Journals Online (AJOL)

    Journal of Applied Science, Engineering and Technology. ... Food Science and Technology, Electrical & Electronics Engineering, Energy, ... Pretreatment effect on sun and solar drying of carrot slices · EMAIL FULL TEXT EMAIL FULL TEXT

  7. JPRS Report, Science & Technology, Japan.

    Science.gov (United States)

    2007-11-02

    space infrastructure. Structural materials, specially composite materials, technology is an important theme, so we are putting emphasis on research...attack is large, we also prepared a winglet -shaped main wing. A tail wing with a 90 degree angle of intersection was also prepared due to fears that...studies on aerodynamically flexible tailoring techniques for main wings, the models used in flutter wind tunnel tests are built with composite

  8. English for Science and Technology - Theoretical Part

    DEFF Research Database (Denmark)

    Mousten, Birthe

    The books covers the most basic, theoretical approaches to English for Science and Technology. The book is aimed at BA Students or as an introduction to English in the genres of science and technology writing.......The books covers the most basic, theoretical approaches to English for Science and Technology. The book is aimed at BA Students or as an introduction to English in the genres of science and technology writing....

  9. Welcome to Quantum Science and Technology

    Science.gov (United States)

    Thew, Rob

    2016-03-01

    Quantum information science and related technologies now involve thousands of researchers worldwide, cutting across physics, chemistry, engineering, bioscience, applied mathematics and computer science, extending from fundamental science to novel applications and industry. This situation defines the scope and mission of Quantum Science and Technology, a new IOP journal serving the interests of this multidisciplinary field by publishing research of the highest quality and impact.

  10. Can Science and Technology Capacity be Measured?

    CERN Document Server

    Wagner, Caroline S; Dutta, Arindum

    2015-01-01

    The ability of a nation to participate in the global knowledge economy depends to some extent on its capacities in science and technology. In an effort to assess the capacity of different countries in science and technology, this article updates a classification scheme developed by RAND to measure science and technology capacity for 150 countries of the world.

  11. Science & Technology Review June 2010

    Energy Technology Data Exchange (ETDEWEB)

    Blobaum, K J

    2010-04-28

    This month's issue has the following articles: (1) A Leader in High-Pressure Science--Commentary by William H. Goldstein; (2) Diamonds Put the Pressure on Materials--New experimental capabilities are helping Livermore scientists better understand how extreme pressure affects a material's structure; (3) Exploring the Unusual Behavior of Granular Materials--Livermore scientists are developing new techniques for predicting the response of granular materials under pressure; (4) A 1-Ton Device in a Briefcase--A new briefcase-sized tool for nuclear magnetic resonance is designed for onsite analysis of suspected chemical weapons; and (5) Targets Designed for Ignition--A series of experiments at the National Ignition Facility is helping scientists finalize the ignition target design.

  12. Models, Databases, and Simulation Tools Needed for the Realization of Integrated Computational Materials Engineering. Proceedings of the Symposium Held at Materials Science and Technology 2010

    Science.gov (United States)

    Arnold, Steven M. (Editor); Wong, Terry T. (Editor)

    2011-01-01

    Topics covered include: An Annotative Review of Multiscale Modeling and its Application to Scales Inherent in the Field of ICME; and A Multiscale, Nonlinear, Modeling Framework Enabling the Design and Analysis of Composite Materials and Structures.

  13. Models, Databases, and Simulation Tools Needed for the Realization of Integrated Computational Materials Engineering. Proceedings of the Symposium Held at Materials Science and Technology 2010

    Science.gov (United States)

    Arnold, Steven M. (Editor); Wong, Terry T. (Editor)

    2011-01-01

    Topics covered include: An Annotative Review of Multiscale Modeling and its Application to Scales Inherent in the Field of ICME; and A Multiscale, Nonlinear, Modeling Framework Enabling the Design and Analysis of Composite Materials and Structures.

  14. Nanoscale tomography in materials science

    Directory of Open Access Journals (Sweden)

    Günter Möbus

    2007-12-01

    Full Text Available In materials science, various techniques for three-dimensional reconstruction of microstructures have been applied successfully for decades, such as X-ray tomography and mechanical sectioning. However, in the last decade the family tree of methods has grown significantly. This is partly through advances in instrumentation. The introduction of the focused ion beam microscope and the transformation of transmission electron microscopy into a multipurpose analytical and structural tool have made major impacts. The main driving force for progress is perhaps the advent of nanotechnology with the need to achieve nanometer-scale resolution and the desire to get a real three-dimensional view of the nanoscale world.

  15. 75 FR 10845 - Subcommittee on Forensic Science; Committee on Science; National Science and Technology Council

    Science.gov (United States)

    2010-03-09

    ... From the Federal Register Online via the Government Publishing Office OFFICE OF SCIENCE AND TECHNOLOGY POLICY Subcommittee on Forensic Science; Committee on Science; National Science and Technology... Subcommittee on Forensic Science of the National Science and Technology Council's (NSTC's) Committee on...

  16. 76 FR 6163 - Subcommittee on Forensic Science; Committee on Science; National Science and Technology Council

    Science.gov (United States)

    2011-02-03

    ... No: 2011-2440] OFFICE OF SCIENCE AND TECHNOLOGY POLICY Subcommittee on Forensic Science; Committee on Science; National Science and Technology Council ACTION: Notice of meeting. Public input is requested... National Science and Technology Council's (NSTC's) Committee on Science will host a public forum...

  17. Advanced materials and technologies. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Lindroos, V.K.; Alander, T.K.R. [eds.] [Helsinki Univ. of Technology, Otaniemi (Finland). Lab. of Physical Metallurgy and Materials Science

    1995-12-31

    The contents of the proceedings consist of three chapters, of which, the first discusses common megatrends, both nationally and globally, in different fields of materials technology. The second chapter is dealing with novel production and processing of base metals and, finally, the third chapter is related with current achievements and future goals of electronic, magnetic, optical and coating materials and their processing

  18. The 2017 terahertz science and technology roadmap

    Science.gov (United States)

    Dhillon, S. S.; Vitiello, M. S.; Linfield, E. H.; Davies, A. G.; Hoffmann, Matthias C.; Booske, John; Paoloni, Claudio; Gensch, M.; Weightman, P.; Williams, G. P.; Castro-Camus, E.; Cumming, D. R. S.; Simoens, F.; Escorcia-Carranza, I.; Grant, J.; Lucyszyn, Stepan; Kuwata-Gonokami, Makoto; Konishi, Kuniaki; Koch, Martin; Schmuttenmaer, Charles A.; Cocker, Tyler L.; Huber, Rupert; Markelz, A. G.; Taylor, Z. D.; Wallace, Vincent P.; Axel Zeitler, J.; Sibik, Juraj; Korter, Timothy M.; Ellison, B.; Rea, S.; Goldsmith, P.; Cooper, Ken B.; Appleby, Roger; Pardo, D.; Huggard, P. G.; Krozer, V.; Shams, Haymen; Fice, Martyn; Renaud, Cyril; Seeds, Alwyn; Stöhr, Andreas; Naftaly, Mira; Ridler, Nick; Clarke, Roland; Cunningham, John E.; Johnston, Michael B.

    2017-02-01

    Science and technologies based on terahertz frequency electromagnetic radiation (100 GHz-30 THz) have developed rapidly over the last 30 years. For most of the 20th Century, terahertz radiation, then referred to as sub-millimeter wave or far-infrared radiation, was mainly utilized by astronomers and some spectroscopists. Following the development of laser based terahertz time-domain spectroscopy in the 1980s and 1990s the field of THz science and technology expanded rapidly, to the extent that it now touches many areas from fundamental science to ‘real world’ applications. For example THz radiation is being used to optimize materials for new solar cells, and may also be a key technology for the next generation of airport security scanners. While the field was emerging it was possible to keep track of all new developments, however now the field has grown so much that it is increasingly difficult to follow the diverse range of new discoveries and applications that are appearing. At this point in time, when the field of THz science and technology is moving from an emerging to a more established and interdisciplinary field, it is apt to present a roadmap to help identify the breadth and future directions of the field. The aim of this roadmap is to present a snapshot of the present state of THz science and technology in 2017, and provide an opinion on the challenges and opportunities that the future holds. To be able to achieve this aim, we have invited a group of international experts to write 18 sections that cover most of the key areas of THz science and technology. We hope that The 2017 Roadmap on THz science and technology will prove to be a useful resource by providing a wide ranging introduction to the capabilities of THz radiation for those outside or just entering the field as well as providing perspective and breadth for those who are well established. We also feel that this review should serve as a useful guide for government and funding agencies.

  19. Phospholipid Vesicles in Materials Science

    Energy Technology Data Exchange (ETDEWEB)

    Granick, Steve [Univ. of Illinois, Champaign, IL (United States)

    2016-05-11

    The objective of this research was to develop the science basis needed to deploy phospholipid vesicles as functional materials in energy contexts. Specifically, we sought to: (1) Develop an integrated molecular-level understanding of what determines their dynamical shape, spatial organization, and responsiveness to complex, time-varying environments; and (2) Develop understanding of their active transportation in crowded environments, which our preliminary measurements in cells suggest may hold design principles for targeting improved energy efficiency in new materials systems. The methods to do this largely involved fluorescence imaging and other spectroscopy involving single particles, vesicles, particles, DNA, and endosomes. An unexpected importance outcome was a new method to image light-emitting diodes during actual operation using super-resolution spectroscopy.

  20. International Conference on Emerging Trends in Science, Engineering and Technology

    CERN Document Server

    Caroline, B; Jayanthi, J

    2012-01-01

    The present book is based on the research papers presented in the International Conference on Emerging Trends in Science, Engineering and Technology 2012, held at Tiruchirapalli, India. The papers presented bridges the gap between science, engineering and technology. This book covers a variety of topics, including mechanical, production, aeronautical, material science, energy, civil and environmental energy, scientific management, etc. The prime objective of the book is to fully integrate the scientific contributions from academicians, industrialists and research scholars.

  1. Recovery technologies for building materials

    Science.gov (United States)

    Karu, Veiko; Nurme, Martin; Valgma, Ingo

    2015-04-01

    Mining industry provides building materials for construction. Civil engineers have settled the quality parameters for construction materials. When we produce high quality building materials from carbonate rock (limestone, dolostone), then the estimated waste share is 25% to 30%, depending on crushing principles and rock quality. The challenge is to find suitable technology for waste recovery. During international mining waste related cooperation project MIN-NOVATION (www.min-novation.eu), partners mapped possibilities for waste recovery in mining industry and pointed out good examples and case studies. One example from Estonia showed that when we produce limestone aggregate, then we produce up to 30% waste material (fines with size 0-4mm). This waste material we can see as secondary raw material for building materials. Recovery technology for this fine grained material has been achieved with CDE separation plant. During the process the plant washes out minus 63 micron material from the limestone fines. This technology allows us to use 92% of all limestone reserves. By-product from 63 microns to 4 mm we can use as filler in concrete or as fine limestone aggregate for building or building materials. MIN-NOVATION project partners also established four pilot stations to study other mineral waste recovery technologies and solutions. Main aims on this research are to find the technology for recovery of mineral wastes and usage for new by-products from mineral mining waste. Before industrial production, testing period or case studies are needed. This research is part of the study of Sustainable and environmentally acceptable Oil shale mining No. 3.2.0501.11-0025 http://mi.ttu.ee/etp and the project B36 Extraction and processing of rock with selective methods - http://mi.ttu.ee/separation; http://mi.ttu.ee/miningwaste/

  2. CHINA ASSOCIATION FOR SCIENCE AND TECHNOLOGY

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    The China Association for Science and Technology(CAST) is a non-profit, non-government organization of Chinese scientific and technology workers. As a bridge between the nation's scientific and technological workers and the government, it is an important driving force in developing the country's science and technology.

  3. Science and Technology Parks in the Context of Social Technologies

    Directory of Open Access Journals (Sweden)

    Edgaras Leichteris

    2013-08-01

    Full Text Available This article aims to present a new approach to science and technology park concept and the development prospects in the context of social technologies. Globalization and the spread of social technologies are expanding the influence of science and technology parks on national innovation systems. It opens new directions for research in this area, as well as the practical use of social technologies in the development of science and technology parks. The paper also examines the science and technology park as an institutionalized concept of social technology. In this article the interdisciplinary approach for analyzing the complex concept of science and technology parks is used to explore the theoretical relationships with the social technologies concept. The possible links are identified and illustrated by practical examples ofLithuanian science and technology parks. Finally suggestions for further research are made. Based on the analysis and synthesis of scientific literature in both fields (science and technology parks; social technologies three possible theoretical links are established: a the use of social technologies in science and technology parks b the role of a science park as an intermediate body in the humanization and socialization of technologies c science and technology parks as an institutionalized concept of social technology. The theoretical model is supported by empirical illustrations from the development of Lithuanian science and technology parks, therefore further research in all three directions is feasible and needed. As this research takes a merely theoretical approach to the social systems investigation, it can be qualified only as a preparational stage for further research. The practical examples used in the article are more illustrative than evidence based and shall not be considered as case studies. The research offers an initial framework for researching science and technology parks in the context of social technologies

  4. Science and Technology Parks in the Context of Social Technologies

    Directory of Open Access Journals (Sweden)

    Edgaras Leichteris

    2011-08-01

    Full Text Available Summary. This article aims to present a new approach to science and technology park concept and the development prospects in the context of social technologies. Globalization and the spread of social technologies are expanding the influence of science and technology parks on national innovation systems. It opens new directions for research in this area, as well as the practical use of social technologies in the development of science and technology parks. The paper also examines the science and technology park as an institutionalized concept of social technology. In this article the interdisciplinary approach for analyzing the complex concept of science and technology parks is used to explore the theoretical relationships with the social technologies concept. The possible links are identified and illustrated by practical examples of Lithuanian science and technology parks. Finally suggestions for further research are made. Based on the analysis and synthesis of scientific literature in both fields (science and technology parks; social technologies three possible theoretical links are established: a the use of social technologies in science and technology parks b the role of a science park as an intermediate body in the humanization and socialization of technologies c science and technology parks as an institutionalized concept of social technology. The theoretical model is supported by empirical illustrations from the development of Lithuanian science and technology parks, therefore further research in all three directions is feasible and needed. As this research takes a merely theoretical approach to the social systems investigation, it can be qualified only as a preparational stage for further research. The practical examples used in the article are more illustrative than evidence based and shall not be considered as case studies. The research offers an initial framework for researching science and technology parks in the context of social

  5. Progress in the materials science of silicene.

    Science.gov (United States)

    Yamada-Takamura, Yukiko; Friedlein, Rainer

    2014-12-01

    In its freestanding, yet hypothetical form, the Si counterpart of graphene called silicene is predicted to possess massless Dirac fermions and to exhibit an experimentally accessible quantum spin Hall effect. Such interesting electronic properties are not realized in two-dimensional (2D) Si honeycomb lattices prepared recently on metallic substrates where the crystal and hybrid electronic structures of these 'epitaxial silicene' phases are strongly influenced by the substrate, and thus different from those predicted for isolated 2D structures. While the realization of such low-dimensional Si π materials has hardly been imagined previously, it is evident that the materials science behind silicene remains challenging. In this contribution, we will review our recent results that lead to an enhanced understanding of epitaxial silicene formed on diboride thin films, and discuss the remaining challenges that must be addressed in order to turn Si 2D nanostructures into technologically interesting nanoelectronic materials.

  6. Science& Technology Review November 2003

    Energy Technology Data Exchange (ETDEWEB)

    McMahon, D

    2003-11-01

    This issue of Science & Technology Review covers the following topics: (1) We Will Always Need Basic Science--Commentary by Tomas Diaz de la Rubia; (2) When Semiconductors Go Nano--experiments and computer simulations reveal some surprising behavior of semiconductors at the nanoscale; (3) Retinal Prosthesis Provides Hope for Restoring Sight--A microelectrode array is being developed for a retinal prosthesis; (4) Maglev on the Development Track for Urban Transportation--Inductrack, a Livermore concept to levitate train cars using permanent magnets, will be demonstrated on a 120-meter-long test track; and (5) Power Plant on a Chip Moves Closer to Reality--Laboratory-designed fuel processor gives power boost to dime-size fuel cell.

  7. Terahertz Science, Technology, and Communication

    Science.gov (United States)

    Chattopadhyay, Goutam

    2013-01-01

    The term "terahertz" has been ubiquitous in the arena of technology over the past couple of years. New applications are emerging every day which are exploiting the promises of terahertz - its small wavelength; capability of penetrating dust, clouds, and fog; and possibility of having large instantaneous bandwidth for high-speed communication channels. Until very recently, space-based instruments for astrophysics, planetary science, and Earth science missions have been the primary motivator for the development of terahertz sensors, sources, and systems. However, in recent years the emerging areas such as imaging from space platforms, surveillance of person-borne hidden weapons or contraband from a safe stand-off distance and reconnaissance, medical imaging and DNA sequencing, and in the world high speed communications have been the driving force for this area of research.

  8. Center for Nanoscale Science and Technology

    Science.gov (United States)

    NIST Center for Nanoscale Science and Technology (Program website, free access)   Currently there is no database matching your keyword search, but the NIST Center for Nanoscale Science and Technology website may be of interest. The Center for Nanoscale Science and Technology enables science and industry by providing essential measurement methods, instrumentation, and standards to support all phases of nanotechnology development, from discovery to production.

  9. Daylight Science and Daylighting Technology

    CERN Document Server

    Kittler, Richard; Darula, Stanislav

    2012-01-01

    Sunlight profoundly influences the Earth's atmosphere and biosphere. Nature fuels the evolution of all living things, their visual systems, and the manner in which they adapt, accommodate, and habituate. Sun luminance measurements serve as data to calculate typical changes in the daily, monthly, and annual variability characteristics of daylight. Climate-based sky luminance patterns are used as models in predicting daylighting calculation and computer programs applied in architecture and building design. Historically, daylight science and daylighting technology has prioritized photometric methods of measurements, calculation, and graphical tools aimed at predicting or evaluating the daylighting of architectural design alternatives. However, due to a heightened awareness of general health and well-being, sunlight exposure and freedom from visual discomfort while undertaking visual tasks are now equally prioritized. Therefore, in order to assure optimal environmental quality, daylighting technology must be base...

  10. Science & Technology Review September 2009

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2009-07-24

    This month's issue has the following articles: (1) Remembering the Laboratory's First Director - Commentary by Harold Brown; (2) Herbert F. York (1921-2009): A Life of Firsts, an Ambassador for Peace - The Laboratory's first director, who died on May 19, 2009, used his expertise in science and technology to advance arms control and prevent nuclear war; (3) Searching for Life in Extreme Environments - DNA will help researchers discover new marine species and prepare to search for life on other planets; (4) Energy Goes with the Flow - Lawrence Livermore is one of the few organizations that distills the big picture about energy resources and use into a concise diagram; and (5) The Radiant Side of Sound - An experimental method that converts sound waves into light may lead to new technologies for scientific and industrial applications.

  11. NASA Earth Science Update with Information Science Technology

    Science.gov (United States)

    Halem, Milton

    2000-01-01

    This viewgraph presentation gives an overview of NASA earth science updates with information science technology. Details are given on NASA/Earth Science Enterprise (ESE)/Goddard Space Flight Center strategic plans, ESE missions and flight programs, roles of information science, ESE goals related to the Minority University-Space Interdisciplinary Network, and future plans.

  12. Japan Report, Science and Technology

    Science.gov (United States)

    2007-11-02

    Ishikawa; OPTRONICS, Oct 86) 47 NEW MATERIALS /9986 High Thermal Conductive Aluminum Nitride Discussed (Kazuo Shinozaki, Akihiko Tsuge; CERAMICS...cooling systems (kerosene and gas) in terms of convenience, safety, and cleanliness . It will attract consumers’ attention in the future if its thermal...constant demands for safety, cleanliness , low cost, and convenience. The development of technology is indispensable to the management of electric

  13. 75 FR 28275 - Homeland Security Science and Technology Advisory Committee

    Science.gov (United States)

    2010-05-20

    ... SECURITY Homeland Security Science and Technology Advisory Committee AGENCY: Science and Technology...: On April 12, 2010, the Homeland Security Science and Technology Advisory Committee announced in the... supplements that original meeting notice. DATES: The Homeland Security Science and Technology Advisory...

  14. Science& Technology Review May 2003

    Energy Technology Data Exchange (ETDEWEB)

    McMahon, D H

    2003-05-01

    This May 2003 issue of ''Science and Technology Review'' covers the following articles: (1) ''Another Weapon in the Battle against Proliferation''; (2) ''Chemical Weapons Can't Evade This Lab'', Livermore's Forensic Science Center is certified to analyze samples collected during inspections conducted to monitor the Chemical Weapons Convention. (3) ''Bird's-Eye View Clarifies Research on the Ground'' Geobotanical remote sensing has applications in homeland security and energy resource development and provides new insights into complex ecologic systems. (4) ''Age Does Make a Difference'' Age-dating techniques and ultrasensitive technologies provide a comprehensive map of California's groundwater and indicate where it is most vulnerable to contaminants. (5) ''Reducing Aerodynamic Drag'' Simulations and experiments reveal ways to make heavy trucks more aerodynamic and fuel efficient.

  15. Science& Technology Review October 2002

    Energy Technology Data Exchange (ETDEWEB)

    Budil, K S

    2002-10-01

    The October 2002 issue of Science and Technology Review has the following articles: (1) Applied Science Is a Hallmark of This Laboratory--Commentary by Hal Graboske. (2) Sending Up Signals for Genetic Variation--In situ rolling circle amplification promises to advance the detection and treatment of cancer and other diseases. (3) SiMM Is Anything But Simple--Modules of silicon microchannels and microlenses result in the smallest, most powerful, and least expensive laser diode pumps ever. (4) World's Most Powerful Solid-State Laser--A new design allows tremendous scaling up of solid-state laser power. (5) Stepping Up to Extreme Lithography--The next generation of computer chips can now be produced on a commercial scale. (6) Relief for Acute and Chronic Pain--New technology turns an ancient pain management method into a modern medical tool. (7)50th Anniversary Highlight--14 Energy and Environment: Understanding Our World--The Laboratory's energy and environmental research is an important adjunct to its core national security mission.

  16. JPRS Report, Science & Technology, Japan

    Science.gov (United States)

    2007-11-02

    overcoming the "quenching" the traditional trains , the Linear Maglev system allows phenomena. one transformer station to be able to control one train only...limitless dreams and hopes for the training and securing, (2) ample R&D funding, (3) infor- progress of science. At the same time, this discovery gave...with an Takagi-When you say an intelligent material, which is, engineering training , are least familiar with some of the let’s say, a bone, do you mean

  17. Science and Technology Review June 2002

    Energy Technology Data Exchange (ETDEWEB)

    Budil, K.

    2002-06-01

    This Science and Technology Review has the following stories: (1) Fighting Bioterrorism, Fighting Cancer; (2) A Two-Pronged Attack on Bioterrorism--synthetic two-legged molecules will be excellent detectors of biowarfare agents and cancer cells; (3) Adaptive Optics Sharpen the View from Earth--astronomers are obtaining images with unprecedented resolution, thanks to telescopes equipped with adaptive optics developed at Livermore; (4) Experiments Re-create X Rays from Comets--Experiments using the Laboratory's electron beam ion trap and an x-ray spectrometer designed by the National Aeronautics and Space Administration are shedding light on how comets emit x rays as they pass the Sun; (5) Chemistry--50 Years of exploring the Material World--from isotopic analysis to atomic-level simulations of material behavior, Livermore's chemists and materials scientists apply their expertise to fulfill the Laboratory's mission.

  18. Thinking again about science in technology.

    Science.gov (United States)

    Alexander, Jennifer Karns

    2012-09-01

    How to characterize the relationship between science and technology has been a sensitive issue for historians of technology. This essay uses a recent and controversial piece by Paul Forman as a springboard for reexamining the concept of applied science and asks whether "applied science" remains a useful term. Scholars have often taken "applied science" to mean the subordination of technological knowledge to scientific knowledge-and thus the subordination of history of technology to history of science. This essay argues that the historical moment for sensitivity on the subject of applied science has passed, that even in instances where technology can accurately be described as subordinate to science it need not follow that its history is subordinate, and that the concept can be useful in addressing issues in the history and contemporary practice of engineering education.

  19. African Journal of Science and Technology

    African Journals Online (AJOL)

    PROMOTING ACCESS TO AFRICAN RESEARCH ... The African Journal of Science and Technology (AJST) is a biannual technical publication ... Le Journal Africain de Science et de Technologie est une revue scientifique du Journal Africain ...

  20. Educational technologies in health sciences libraries: teaching technology skills.

    Science.gov (United States)

    Hurst, Emily J

    2014-01-01

    As technology rapidly changes, libraries remain go-to points for education and technology skill development. In academic health sciences libraries, trends suggest librarians provide more training on technology topics than ever before. While education and training have always been roles for librarians, providing technology training on new mobile devices and emerging systems requires class creation and training capabilities that are new to many librarians. To appeal to their users, many health sciences librarians are interested in developing technology-based classes. This column explores the question: what skills are necessary for developing and teaching technology in an academic health sciences library setting?

  1. Effective Development Evaluation of Science and Technology MaterialResources of Provinces Based on DEA Model%基于DEA的省区科技物力资源效能发展评价

    Institute of Scientific and Technical Information of China (English)

    党亚茹; 孟彩红

    2011-01-01

    为了测度我国各省区科技物力资源效能的发展水平,以高技术产业为研究对象,运用数据包络分析法(DEA),通过构建科技物力资源效能发展评价指标体系,对高技术产业科技物力资源的效能发展进行有效性分析,并绘制出效能发展有效性的雁行形态图,呈现我国各省区科技物力资源效能发展的现状.在此基础上进行松弛度分析,调整物力资源的投入,从而使各省区的科技物力资源效能达到目标发展状态.%In order to measure the effective development level of science and technology material resources, Data Envelopment Analysis ( DEA) method is used to research the high - tech industry. Through establishing the effective development evaluation index system , effectiveness analyses are made on the effective development of science and technology material resources in high - tech industry, and a diagram of flying geese is plotted, showing the effective development situation of science and technology material resources of provinces and regions in China. Then the paper makes relaxation analysis and adjusts the input of material resources to achieve the target development state of science and technology material resources in each province.

  2. JPRS Report, Science & Technology, USSR: Materials Science

    Science.gov (United States)

    1988-02-22

    substrate chemically, electropolishing in a standard electrolyte was used to prepare foils about 20 ym thick for Mossbauer spectroscopy and x-ray...330 mm in diameter, by quasi-isostatic pressing. Specimens have been tested in porcelain kilns with excellent results. References 5: all Russian

  3. JPRS Report, Science & Technology, USSR: Materials Science.

    Science.gov (United States)

    2007-11-02

    atomizing chamber. The nozzle set with holder, also made of stainless steel or graphite, is warmed up by a separate heater. The atomizing chamber is...argon arc for hardfacing blank strips of VT6s titanium alloy was studied, such an electrode melting at the lower tip and dropping a blob through a...pipette onto the strip preheated by the argon arc to the melting point. The mass of this blob , a very important process parameter, was controlled as

  4. JPRS Report, Science & Technology, USSR: Materials Science

    Science.gov (United States)

    2007-11-02

    of an anodic oxide film of Ti02 with very low electron conductivity preventing reactions liberating oxygen on the surface of the" specimens. The...for 15 minutes. The oxidation of specimens with a titanium carbonitride Impurity began at approximately 380°C, resulting in the formation of Ti02

  5. JPRS Report, Science & Technology, USSR: Materials Science

    Science.gov (United States)

    2007-11-02

    Processes of Sintering and Carburizing of Powder Alloys (V.T. Vysotskiy, F.G. Lovshenko; METALLOVEDENIYE I TERMICHESKAYA OBRABOTKA METALLOV, No 1...achievements in this area. 20 PREPARATIONS UDC 621.785.5:621.762 Study of Possibility of Combining Processes of Sintering and Carburizing of Powder...Lovshenko, Mogilev Machine- Building Institute] [Abstract] A study was made of the influence of combining the processes of sintering and carburizing on

  6. JPRS Report, Science & Technology, USSR: Materials Science

    Science.gov (United States)

    2007-11-02

    No 5, May 87) 51 Mechanical Strength of Shafts in Hydraulic Machines Made of Different Steels and Joined by Friction Welding (A, F, Dashehenko...the chemical and even the jewelry industry — this is only a partial list of branches in which a new method of growing crystals and a progressive...given conditions — it fails. Using precious metals such as platinum is too costly. It has turned out that synthetic sapphire may be the answer. Reliable

  7. JPRS Report, Science & Technology, USSR: Materials Science

    Science.gov (United States)

    2007-11-02

    dithiophosphoric acid), and frother-reagents (T-66 etalon, hexyl alcohols, terpene alcohols, pine oil, Methylisobutyl carbinol MIBC). References 2...degassing aluminum alloys has been developed, namely use of a metal capable of absorbing gas, specifically hydrogen dissolved in the aluminum melt

  8. JPRS Report, Science & Technology, USSR: Materials Science

    Science.gov (United States)

    2007-11-02

    METALLURGIYA, No 12, Dec 86) 2 Reconstmction of Microwave Radio Image in Multilayer Medium (V.L. Spivak ; DEFEKTOSKOPIYA, No 12, Dec 86) 3...32-37 [Article by V.L. Spivak ] [Abstract] The problem of reconstructing an image in a multilayer dielectric medium for microwave radiointroscopy

  9. Science & Technology Review November 2002

    Energy Technology Data Exchange (ETDEWEB)

    Budil, K

    2002-09-25

    This months issue of Science and Technology Review has the following articles: (1) High-Tech Help for Fighting Wildfires--Commentary by Leland W. Younker; (2) This Model Can Take the Heat--A physics-based simulation program to combat wildfires combines the capabilities and resources of Lawrence Livermore and Los Alamos national laboratories. (3) The Best and the Brightest Come to Livermore--The Lawrence Fellowship Program attracts the most sought-after postdoctoral researchers to the Laboratory. (4) A view to Kill--Livermore sensors are aimed at the ''kill'' vehicle when it intercepts an incoming ballistic missile. (5) 50th Anniversary Highlight--Biological Research Evolves at Livermore--Livermore's biological research program keeps pace with emerging national issues, from studying the effects of ionizing radiation to detecting agents of biological warfare.

  10. Science & Technology Review May 2006

    Energy Technology Data Exchange (ETDEWEB)

    Aufderheide III, M B

    2006-04-03

    This month's issue has the following articles: (1) Science and Technology Help the Nation Counter Terrorism--Commentary by Raymond J. Juzaitis; (2) Imagers Provide Eyes to See Gamma Rays--Gamma-ray imagers provide increased radiation detection capabilities and enhance the nation's arsenal for homeland security; (3) Protecting the Nation's Livestock--Foot-and-mouth disease could devastate America's livestock; a new assay provides a rapid means to detect it; (4) Measures for Measures--Laboratory physicists combine emissivity and reflectivity to achieve highly accurate temperature measurements of metal foils; and (5) Looping through the Lamb Shift--Livermore scientists measured a small perturbation in the spectra of highly ionized uranium--the first measurement of the two-loop Lamb shift in a bound state.

  11. ANSTO: Australian Nuclear Science and Technology Organization

    Science.gov (United States)

    The Australian Nuclear Science and Technology Organization conducts or is engaged in collaborative research and development in the application of nuclear science and associated technology. Through its Australian radio-isotopes unit, it markets radioisotopes, their products and other services for the nuclear medicine industry and research. It also operates national nuclear facilities (HIFAR and Moata research reactors), promotes training, provides advice and disseminates information on nuclear science and technology. The booklet briefly outlines these activities.

  12. Science & Technology Review May 2005

    Energy Technology Data Exchange (ETDEWEB)

    Aufderheide, M B

    2005-04-05

    Articles in this month's issue include: (1) Einstein's Legacy Alive at Livermore--Commentary by Michael R. Anastasio; (2) Applying Einstein's Theories of Relativity--In their efforts to understand the cosmos, Livermore physicists must account for the relativistic effects postulated by Albert Einstein; (3) Locked in Rock: Sequestering Carbon Dioxide Underground--Livermore scientists are examining technologies to reduce atmospheric concentrations of carbon dioxide by burying it deep underground; (4) Modeling the Subsurface Movement of Radionuclides--Using data from past underground nuclear tests, a Livermore team is modeling radionuclide migration at the Nevada Test Site; and (5) Novel Materials from Solgel Chemistry--Livermore chemists are developing a method for fabricating solgels to better control the physical properties of the new materials.

  13. Mesoporous materials for clean energy technologies.

    Science.gov (United States)

    Linares, Noemi; Silvestre-Albero, Ana M; Serrano, Elena; Silvestre-Albero, Joaquín; García-Martínez, Javier

    2014-11-21

    Alternative energy technologies are greatly hindered by significant limitations in materials science. From low activity to poor stability, and from mineral scarcity to high cost, the current materials are not able to cope with the significant challenges of clean energy technologies. However, recent advances in the preparation of nanomaterials, porous solids, and nanostructured solids are providing hope in the race for a better, cleaner energy production. The present contribution critically reviews the development and role of mesoporosity in a wide range of technologies, as this provides for critical improvements in accessibility, the dispersion of the active phase and a higher surface area. Relevant examples of the development of mesoporosity by a wide range of techniques are provided, including the preparation of hierarchical structures with pore systems in different scale ranges. Mesoporosity plays a significant role in catalysis, especially in the most challenging processes where bulky molecules, like those obtained from biomass or highly unreactive species, such as CO2 should be transformed into most valuable products. Furthermore, mesoporous materials also play a significant role as electrodes in fuel and solar cells and in thermoelectric devices, technologies which are benefiting from improved accessibility and a better dispersion of materials with controlled porosity.

  14. Inertial Confinement Fusion Materials Science

    Energy Technology Data Exchange (ETDEWEB)

    Hamza, A V

    2004-06-01

    Demonstration of thermonuclear ignition and gain on a laboratory scale is one of science's grand challenges. The National Ignition Facility (NIF) is committed to achieving inertial confinement fusion (ICF) by 2010. Success in this endeavor depends on four elements: the laser driver performance, target design, experimental diagnostics performance, and target fabrication and target materials performance. This article discusses the current state of target fabrication and target materials performance. The first three elements will only be discussed insofar as they relate to target fabrication specifications and target materials performance. Excellent reviews of the physics of ICF are given by Lindl [Lindl 1998] and Lindl et al. [Lindl 2004]. To achieve conditions under which inertial confinement is sufficient to achieve thermonuclear burn, an imploded fuel capsule is compressed to conditions of high density and temperature. In the laboratory a driver is required to impart energy to the capsule to effect an implosion. There are three drivers currently being considered for ICF in the laboratory: high-powered lasers, accelerated heavy ions, and x rays resulting from pulsed power machines. Of these, high-powered lasers are the most developed, provide the most symmetric drive, and provide the most energy. Laser drive operates in two configurations. The first is direct drive where the laser energy impinges directly on the ICF capsule and drives the implosion. The second is indirect drive, where the energy from the laser is first absorbed in a high-Z enclosure or hohlraum surrounding the capsule, and the resulting x-rays emitted by the hohlraum material drives the implosion. Using direct drive the laser beam energy is absorbed by the electrons in the outer corona of the target. The electrons transport the energy to the denser shell region to provide the ablation and the resulting implosion. Laser direct drive is generally less efficient and more hydrodynamically unstable

  15. Laser Science & Technology Program Annual Report - 2000

    Energy Technology Data Exchange (ETDEWEB)

    Chen, H-L

    2001-03-20

    The Laser Science and Technology (LS&T) Program Annual Report 2001 provides documentation of the achievements of the LLNL LS&T Program during the April 2001 to March 2002 period using three formats: (1) an Overview that is a narrative summary of important results for the year; (2) brief summaries of research and development activity highlights within the four Program elements: Advanced Lasers and Components (AL&C), Laser Optics and Materials (LO&M), Short Pulse Laser Applications and Technologies (SPLAT), and High-Energy Laser System and Tests (HELST); and (3) a compilation of selected articles and technical reports published in reputable scientific or technology journals in this period. All three elements (Annual Overview, Activity Highlights, and Technical Reports) are also on the Web: http://laser.llnl.gov/lasers/pubs/icfq.html. The underlying mission for the LS&T Program is to develop advanced lasers, optics, and materials technologies and applications to solve problems and create new capabilities of importance to the Laboratory and the nation. This mission statement has been our guide for defining work appropriate for our Program. A major new focus of LS&T beginning this past year has been the development of high peak power short-pulse capability for the National Ignition Facility (NIF). LS&T is committed to this activity.

  16. Science& Technology Review October 2003

    Energy Technology Data Exchange (ETDEWEB)

    McMahon, D H

    2003-10-01

    The October 2003 issue of Science & Technology Review consists of the following articles: (1) Award-Winning Technologies from Collaborative Efforts--Commentary by Hal Graboske; (2) BASIS Counters Airborne Bioterrorism--The Biological Aerosol Sentry and Information System is the first integrated biodefense system; (3) In the Chips for the Coming Decade--A new system is the first full-field lithography tool for use at extreme ultraviolet wavelengths; (4) Smoothing the Way to Print the Next Generation of Computer Chips--With ion-beam thin-film planarization, the reticles and projection optics made for extreme ultraviolet lithography are nearly defect-free; (5) Eyes Can See Clearly Now--The MEMS-based adaptive optics phoropter improves the process of measuring and correcting eyesight aberrations; (6) This Switch Takes the Heat--A thermally compensated Q-switch reduces the light leakage on high-average-power lasers; (7) Laser Process Forms Thick, Curved Metal Parts--A new process shapes parts to exact specifications, improving their resistance to fatigue and corrosion cracking; and (8) Characterizing Tiny Objects without Damaging Them--Livermore researchers are developing nondestructive techniques to probe the Lilliputian world of mesoscale objects.

  17. PREFACE: Nanoscale science and technology

    Science.gov (United States)

    Bellucci, Stefano

    2008-11-01

    Over the last decade, rapid progress in the field of nanoscience has been increasingly driving the attention of the scientific community as well as society at large on the corresponding technological applications, which are the object of so-called nanotechnology. A strong interest in assessing the current state of the art of this fast growing field, as well as stimulating research networking, prompted the organization of the International School and Workshop 'Nanoscience & Nanotechnology (n&n2007)', under the patronage of the Italian Institute for Nuclear Physics (INFN), the University of Rome Tor Vergata, the Tor Vergata Polyclinic, and the Catholic University of Rome, with generous sponsorship from 3M, 2M Strumenti, MTS, Ape Research, Crisel Instruments, Veeco and Amira. The aims of this event were as follows: to foster the concrete planning of future devices based on innovative (nano)materials, involving both industrial entities and public research institutes; to allow sponsoring firms to present their instrumentation and success stories, based on current use by significant customers; to lend an opportunity for preparing and presenting joint projects, involving both industry and public research, see e.g. the EU 7th Framework Programs; to explore the possibility of integrating nanodevices from their concept into system projects. The conference http://www.lnf.infn.it/conference/nn2007/ gathered at Villa Mondragone in Monte Porzio Catone, Italy, with leading experts in research and innovative technologies in biology, medicine, aerospace, optoelectronics, materials and instrumentation, coming both from academic research and industrial areas, as well as national security and military defense experts in attendence. Several successful meetings in this field have taken place in the past, such as the Nanotubes & Nanostructures (N&N) School and Workshop Series [1, 2, 3, 4] including: N&N2000, S Margherita di Pula (Cagliari), Italy, 24 September-4 October 2000, http

  18. Application of comptuter technology in fruit science

    Institute of Scientific and Technical Information of China (English)

    Pang Xiaoming; Wan Shuyuan; Hu Chungen

    2003-01-01

    This paper summarized the application of computer technology in fruit science, including crop modelling,expert system, decision support system (DSS), computer vision (CV), the Internet, 3 "S" technology, etc. The existingproblems and prospects are also discussed in the paper.

  19. Wind Energy Workforce Development: Engineering, Science, & Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lesieutre, George A.; Stewart, Susan W.; Bridgen, Marc

    2013-03-29

    Broadly, this project involved the development and delivery of a new curriculum in wind energy engineering at the Pennsylvania State University; this includes enhancement of the Renewable Energy program at the Pennsylvania College of Technology. The new curricula at Penn State includes addition of wind energy-focused material in more than five existing courses in aerospace engineering, mechanical engineering, engineering science and mechanics and energy engineering, as well as three new online graduate courses. The online graduate courses represent a stand-alone Graduate Certificate in Wind Energy, and provide the core of a Wind Energy Option in an online intercollege professional Masters degree in Renewable Energy and Sustainability Systems. The Pennsylvania College of Technology erected a 10 kilowatt Xzeres wind turbine that is dedicated to educating the renewable energy workforce. The entire construction process was incorporated into the Renewable Energy A.A.S. degree program, the Building Science and Sustainable Design B.S. program, and other construction-related coursework throughout the School of Construction and Design Technologies. Follow-on outcomes include additional non-credit opportunities as well as secondary school career readiness events, community outreach activities, and public awareness postings.

  20. Pre-Service Science Teachers' Cognitive Structures Regarding Science, Technology, Engineering, Mathematics (STEM) and Science Education

    Science.gov (United States)

    Hacioglu, Yasemin; Yamak, Havva; Kavak, Nusret

    2016-01-01

    The aim of this study is to reveal pre-service science teachers' cognitive structures regarding Science, Technology, Engineering, Mathematics (STEM) and science education. The study group of the study consisted of 192 pre-service science teachers. A Free Word Association Test (WAT) consisting of science, technology, engineering, mathematics and…

  1. Shock wave science and technology reference library

    CERN Document Server

    2009-01-01

    This book is the second of several volumes on solids in the Shock Wave Science and Technology Reference Library. These volumes are primarily concerned with high-pressure shock waves in solid media, including detonation and high-velocity impact and penetration events. Of the four extensive chapters in this volume, the first two describe the reactive behavior of condensed phase explosives, - Condensed-Phase Explosives: Shock Initiation and Detonation Phenomena (SA Sheffield and R Engelke) - First Principles Molecular Simulations of Energetic Materials at High-Pressures (F Zhang, S Alavi, and TK Woo), and the remaining two discuss the inert, mechanical response of solid materials. - Combined Compression and Shear Plane Waves (ZP Tang and JB Aidun), and - Dynamic Fragmentation of Solids (D Grady). All chapters are each self-contained, and can be read independently of each other. They offer a timely reference, for beginners as well as professional scientists and engineers, on the foundations of detonation phenomen...

  2. JPRS Report - Science & Technology USSR: Life Sciences.

    Science.gov (United States)

    2007-11-02

    entirely new technology is required for hothouses. Hydroponics appeared to offer the solution. But, its introduction has given rise to a range of...Mytishchi technology from con- ventional hydroponics ? The later has many variations. In Japan, for example, oxygen is fed to the root system through a...best known are hydroponic methods with the use of a solid-state substrate—gravel, moss, sand, peat, saw- dust, and, recently, ion-exchange resins

  3. JPRS Report, Science & Technology, USSR: Life Sciences

    Science.gov (United States)

    2007-11-02

    Melnikov, Laboratory of Bionic Research (Headed by Candidate of Biological Sciences A. A. Kuzmin), Pacific Scientific Research Institute of... architecture have a great deal in common with the arterial systems of whales described earlier. Figures 2, references 14: 6 Russian, 8 Western

  4. JPRS Report - Science & Technology USSR: Life Sciences.

    Science.gov (United States)

    1988-04-22

    conducted in the department of cytophysiology and cellular engineering of the UkSSR Academy of Science Institute of Botany in Kiev. Yuriy Yuryevich... internship under the direct supervision of the institute. 13227 JPRS-ULS-88-008 22 April 1988 Electrical Activity of Human Brain Under Conditions of

  5. Lead-acid battery technologies fundamentals, materials, and applications

    CERN Document Server

    Jung, Joey; Zhang, Jiujun

    2015-01-01

    Lead-Acid Battery Technologies: Fundamentals, Materials, and Applications offers a systematic and state-of-the-art overview of the materials, system design, and related issues for the development of lead-acid rechargeable battery technologies. Featuring contributions from leading scientists and engineers in industry and academia, this book:Describes the underlying science involved in the operation of lead-acid batteriesHighlights advances in materials science and engineering for materials fabricationDelivers a detailed discussion of the mathematical modeling of lead-acid batteriesAnalyzes the

  6. Science and Technology Teachers' Views of Primary School Science and Technology Curriculum

    Science.gov (United States)

    Yildiz-Duban, Nil

    2013-01-01

    This phenomenographic study attempts to explicit science and technology teachers' views of primary school science and technology curriculum. Participants of the study were selected through opportunistic sampling and consisted of 30 science and technology teachers teaching in primary schools in Afyonkarahisar, Turkey. Data were collected through an…

  7. 2003 research briefs : Materials and Process Sciences Center.

    Energy Technology Data Exchange (ETDEWEB)

    Cieslak, Michael J.

    2003-08-01

    This report is the latest in a continuing series that highlights the recent technical accomplishments associated with the work being performed within the Materials and Process Sciences Center. Our research and development activities primarily address the materials-engineering needs of Sandia's Nuclear-Weapons (NW) program. In addition, we have significant efforts that support programs managed by the other laboratory business units. Our wide range of activities occurs within six thematic areas: Materials Aging and Reliability, Scientifically Engineered Materials, Materials Processing, Materials Characterization, Materials for Microsystems and Materials Modeling and Computational Simulation. We believe these highlights collectively demonstrate the importance that a strong materials-science base has on the ultimate success of the NW program and the overall DOE technology portfolio.

  8. 2004 research briefs :Materials and Process Sciences Center.

    Energy Technology Data Exchange (ETDEWEB)

    Cieslak, Michael J.

    2004-01-01

    This report is the latest in a continuing series that highlights the recent technical accomplishments associated with the work being performed within the Materials and Process Sciences Center. Our research and development activities primarily address the materials-engineering needs of Sandia's Nuclear-Weapons (NW) program. In addition, we have significant efforts that support programs managed by the other laboratory business units. Our wide range of activities occurs within six thematic areas: Materials Aging and Reliability, Scientifically Engineered Materials, Materials Processing, Materials Characterization, Materials for Microsystems, and Materials Modeling and Simulation. We believe these highlights collectively demonstrate the importance that a strong materials-science base has on the ultimate success of the NW program and the overall DOE technology portfolio.

  9. 2005 Research Briefs : Materials and Process Sciences Center.

    Energy Technology Data Exchange (ETDEWEB)

    Cieslak, Michael J.

    2005-05-01

    This report is the latest in a continuing series that highlights the recent technical accomplishments associated with the work being performed within the Materials and Process Sciences Center. Our research and development activities primarily address the materials-engineering needs of Sandia's Nuclear-Weapons (NW) program. In addition, we have significant efforts that support programs managed by the other laboratory business units. Our wide range of activities occurs within six thematic areas: Materials Aging and Reliability, Scientifically Engineered Materials, Materials Processing, Materials Characterization, Materials for Microsystems, and Materials Modeling and Simulation. We believe these highlights collectively demonstrate the importance that a strong materials-science base has on the ultimate success of the NW program and the overall DOE technology portfolio.

  10. Introduction to the history of science and technology

    Energy Technology Data Exchange (ETDEWEB)

    Jang, Byeong Ju

    1998-08-15

    This book contains origin of technology and development of civilization, national philosophy and ancient science and technology, Middle Age society and accumulation of science and technology, the era of the Renaissance and science and technology, development of science revolution and experimental science, technology and Mechanistic nature view of the manufacture time, science and evolution theory of the time of enlightenment idea, science and technology of the Industrial Revolution time, Korea's science and technology, modern technique and scientific approach, science and technology of the twenty-first century, and the role of science and technology in modern society.

  11. Theory-Guided Technology in Computer Science.

    Science.gov (United States)

    Ben-Ari, Mordechai

    2001-01-01

    Examines the history of major achievements in computer science as portrayed by winners of the prestigious Turing award and identifies a possibly unique activity called Theory-Guided Technology (TGT). Researchers develop TGT by using theoretical results to create practical technology. Discusses reasons why TGT is practical in computer science and…

  12. Theory-Guided Technology in Computer Science.

    Science.gov (United States)

    Ben-Ari, Mordechai

    2001-01-01

    Examines the history of major achievements in computer science as portrayed by winners of the prestigious Turing award and identifies a possibly unique activity called Theory-Guided Technology (TGT). Researchers develop TGT by using theoretical results to create practical technology. Discusses reasons why TGT is practical in computer science and…

  13. Science, Technology and Innovation in Uganda

    Science.gov (United States)

    Brar, Sukhdeep; Farley, Sara E.; Hawkins, Robert; Wagner, Caroline S.

    2010-01-01

    Science, Technology and Innovation in Uganda is part of the World Bank Studies series. These papers are published to communicate the results of the Bank's ongoing research and to stimulate public discussion. This study presents a unique methodology to view science, technology and innovation (STI) in developing countries. The study provides a set…

  14. Science & Technology Review December 2007

    Energy Technology Data Exchange (ETDEWEB)

    Chinn, D J

    2007-10-24

    This month's issue has the following articles: (1) Homeland Security Begins Abroad--Commentary by John C. Doesburg; (2) Out of Harm's Way--New physical protection and accountability systems, together with a focus on security, safeguard nuclear materials in the Russian Federation; (3) A Calculated Journey to the Center of the Earth--Determining the permeability of partially melted metals in a mineral matrix unlocks secrets about the formation of Earth's core; (4) Wireless That Works--Communication technologies using ultrawideband radar are improving national security; and (5) Power to the People--Edward Teller envisioned safe and plentiful nuclear power for peaceful applications.

  15. Concise encyclopedia of semiconducting materials and related technologies

    CERN Document Server

    Mahajan, S M

    1992-01-01

    The development of electronic materials and particularly advances in semiconductor technology have played a central role in the electronics revolution by allowing the production of increasingly cheap and powerful computing equipment and advanced telecommunications devices. This Concise Encyclopedia, which incorporates relevant articles from the acclaimed Encyclopedia of Materials Science and Engineering as well as newly commissioned articles, emphasizes the materials aspects of semiconductors and the technologies important in solid-state electronics. Growth of bulk crystals and epitaxial layer

  16. JPRS Report Science & Technology USSR: Life Sciences.

    Science.gov (United States)

    1990-07-09

    Traumatology, Orthopedy and Field Surgery (head—professor M. F. Durov) and Chair of VK and LFK (head— docent P. G. Koynosov) of Tyumen Medical...Yu. D., Los, I. P and Popovich, V. M., "Fiziko-matematicheskaya problema deystviya elektro- magnitnykh poley i ionizatsii vozdukha" [The Physico...Article by S. I. Leonovich, docent , and Yu. M. Gain, candidate of medical science, Minsk] [Abstract] An international symposium on lasers in surgery

  17. JPRS Report, Science & Technology USSR: Life Sciences.

    Science.gov (United States)

    1988-07-01

    S. Grigoryan, M. V. Kameneva et ai; DOKLADY AKADEMII NAUK SSSR, No 3, Sep 87] 6 GENETICS Plant Genetics Research in Estonia [O. Priylinn...the hemolysates. Refer- ences 10: 4 Russian, 6 Western. 12126 JPRS-ULS-88-011 1 July 1988 GENETICS Plant Genetics Research in Estonia 18400307...Agriculture"] [Abstract] The department of plant genetics at the Insti- tute of Experimental Biology of the ESSR Academy of Sciences has made a number of

  18. 78 FR 45992 - National Science and Technology Council; Notice of Meeting: Open Meeting of the National Science...

    Science.gov (United States)

    2013-07-30

    ... TECHNOLOGY POLICY National Science and Technology Council; Notice of Meeting: Open Meeting of the National Science and Technology Council; Committee on Technology; Nanoscale Science, Engineering, and Technology... Technology (NSET) Subcommittee of the Committee on Technology, National Science and Technology......

  19. Laser Science and Technology Program Update 2001

    Energy Technology Data Exchange (ETDEWEB)

    Chen, H L; Hackel, L A

    2002-01-01

    The Laser Science and Technology (LS&T) Program's mission is to develop advanced solid-state lasers, optics, materials technologies, and applications to solve problems and create new capabilities of importance to the Nation and the Laboratory. A top, near-term priority is to provide technical support to the National Ignition Facility (NIF) to ensure activation success. LS&T provides the NIF Programs with core competencies and supports its economic viability. The primary objectives of LS&T activities in fiscal year (FY) 2001 have been threefold: (1) to support deployment of hardware and to enhance lasers and optics performance for NIF, (2) to develop advanced solid-state laser systems and optical components for the Department of Energy (DOE) and the Department of Defense (DoD), and (3) to invent, develop, and deliver improved concepts and hardware for other government agencies and U.S. industry. Special efforts have also been devoted to building and maintaining our capabilities in three technology areas: high-power solid-state lasers, high-power optical materials, and applications of advanced lasers.

  20. JPRS Report, Science & Technology USSR: Lift Sciences

    Science.gov (United States)

    2007-11-02

    BIOTECHNOLOGY Adsorption of Microorganisms by Fibrous Materials (G.N. Nikovskaya, A.S. Gordiyenko, et al.; MIKROBIOLOGIYA, No 4, Jul-Aug 86) 23 Search...MIKROBIOLOGICHESKIY ZHURNAL, No. 5, Sep-Oct 86) 52 Biodegradation of Structural Materials by Micromycetes (T.A. Kondratyuk, E.Z. Koval, et al...and the diploid strains obtained from them are capable of formation in the mycelium and liberation, into the environment, of substances with

  1. PREFACE: Tsukuba International Conference on Materials Science 2013

    Science.gov (United States)

    Kijima, Masashi; Ohshima, Kenichi; Kojima, Seiji; Nagasaki, Yukio; Miyazaki, Shuichi; Kim, Hee Young; Kadowaki, Kazuo; Kashiwagi, Takanari; Nakamura, Junji; Yamamoto, Yohei; Goto, Hiromasa

    2014-03-01

    Tsukuba International Conference on Materials Science (TICMS) was held from 28th August to 6th September, 2013 for the celebration of 40th year anniversary of the University of Tsukuba. The conference was organized by the Division of Materials Science, in cooperation with the Graduate School of Pure and Applied Sciences, and Tsukuba Research Center for Interdisciplinary Materials Science. The purpose of the conference was to provide a unique forum for researchers and students working in various fields of materials science, which have been progressing so rapidly that no single society could cover. The conference consists of following seven workshops to cover various fields. The organizing committee believed that the conference gave all participants new insights into the widespread development of materials science and enhanced the circulation, among them, of information released at the conference. The organizers are grateful for the financial support from University of Tsukuba. This volume contains 25 selected papers from invited and contributed papers, all of which have been screened on the basis of the standard review process of the program committee. The editors express their thanks to those authors who contributed the papers published in this proceedings, which reflects the scientific value of the conference. Nov. 20, 2013 Seiji Kojima, Prof. Dr. Chair, Division of Materials Science Chair, Doctoral Program in Materials Science TICMS 2013 (http://www.ticonfms.tsukuba.ac.jp/) Workshop list The 13th Japan-Korea Joint Workshop on Materials Science Summer School of Biomaterials Science The Japan-Korea Joint Workshop on Shape Memory and Superelastic Technologies The 2nd Workshop on THz Radiation from Intrinsic Josephson Junctions The 3rd German-Japan Nanoworkshop TICMS and IWP Joint Workshop on Conjugated Polymers International Workshop on Science and Patents (IWP) 2013

  2. Perspectives on Materials Science in 3D

    DEFF Research Database (Denmark)

    Juul Jensen, Dorte

    2016-01-01

    Materials characterization in 3D has opened a new era in materials science, which is discussed in this paper. The original motivations and visions behind the development of one of the new 3D techniques, namely the three dimensional x-ray diffraction (3DXRD) method, are presented and the route...... to its implementation is described. The present status of materials science in 3D is illustrated by examples related to recrystallization. Finally, challenges and suggestions for the future success for 3D Materials Science relating to hardware evolution, data analysis, data exchange and modeling...

  3. Science& Technology Review September 2003

    Energy Technology Data Exchange (ETDEWEB)

    McMahon, D

    2003-09-01

    This September 2003 issue of ''Science and Technology Review'' covers the following articles: (1) ''The National Ignition Facility Is Born''; (2) ''The National Ignition Facility Comes to Life'' Over the last 15 years, thousands of Livermore engineers, scientists, and technicians as well as hundreds of industrial partners have worked to bring the National Ignition Facility into being. (3) ''Tracking the Activity of Bacteria Underground'' Using real-time polymerase chain reaction and liquid chromatography/tandem mass spectrometry, researchers at Livermore are gaining knowledge on how bacteria work underground to break down compounds of environmental concern. (4) ''When Every Second Counts--Pathogen Identification in Less Than a Minute'' Livermore has developed a system that can quickly identify airborne pathogens such as anthrax. (5) ''Portable Radiation Detector Provides Laboratory-Scale Precision in the Field'' A team of Livermore physicists and engineers has developed a handheld, mechanically cooled germanium detector designed to identify radioisotopes.

  4. 59 MDW/Science and Technology Poster

    Science.gov (United States)

    2017-04-28

    SGYU SUBJECT: Professional Presentation Approval • ’ ...... -""""’ ~ 18 APR 20 17 1. Your paper, entitled 59 MDW/ Science & Technology Poster...presented at/published 59m Medical Wing Chief Scientists Office - Science & Technology to in accordance with MDWI 41-108, has been approved and assigned...Ambulatory Surgical Center (WHASC) internship and residency programs. 3. Please know that if you are a Graduate Health Sciences Education student and

  5. JPRS Report, Science & Technology, USSR: Science & Technology Policy

    Science.gov (United States)

    2007-11-02

    Biological Sciences G. Paulyukyavichyus, head of a laboratory of the Division of Geography of the Institute of Zoology and Parasitology of the Lithuanian SSR...Transport of Macromolecules in Bacteria] (Moscow, "Nauka", 1986). Candidate of Veterinary Sciences V. Sharkunas, docent of the Chair of Contagious...Diseases of the Lithuanian Veterinary Academy—for the textbook " Veterinary Par- asitology" (Vilnius, "Mokslas", 1983). Doctor of Philological Sciences A

  6. JPRS Report, Science & Technology, USSR: Science & Technology Policy

    Science.gov (United States)

    2007-11-02

    of an antimony microwire , a gauge for recording atomic oxygen and ozone and others. Param- eters of thermoelectric devices of different types were...percent—in the field of medical sciences, 8 percent—in the field of chemical sciences, 6 percent—in the field of biological sciences, and 5 percent...Philological 13. Geographical 14. Juridical 15. Pedagogical 16. Medical 17. Pharmaceutical 18. Veterinary 19. Art criticism 20. Architecture 21

  7. Laser science and technology update - 1999

    Energy Technology Data Exchange (ETDEWEB)

    Chen, H L; Powell, H T

    1999-09-23

    The Laser Science and Technology (LS and T) Program's mission is to provide advanced solid-state laser and optics technologies for the Laboratory, government, and industry. The primary activities of LS and T in 1998 have been threefold--to complete the laser technology development and laser component testing for the ICF/NIF Program, to develop advanced solid-state laser systems and optical components for the Department of Defense (DoD) and DOE, and to address the needs of other government agencies and U.S. industry. After a four-year campaign, the LS and T Program achieved timely completion of the laser development effort for the NIF in 1998. This effort includes the special laser and component development, integrated performance testing on Beamlet, and detailed design and cost optimization using computation codes. Upon completing the Title II design review, the focus of the LS and T support effort has been shifted toward NIF laser hardware acquisition and deployment. The LS and T team also continued to develop advanced high-power solid-state laser technology for both the U.S. government and industrial partners. Progress was also made in several new areas: (a) diode-pumped solid-state laser drivers for high-energy-density physics and inertial fusion energy; (b) high-average-power femtosecond and nanosecond lasers for materials processing; and (c) femtosecond lasers for the generation of advanced light sources.

  8. First Materials Science Research Rack Capabilities and Design Features

    Science.gov (United States)

    Schaefer, D.; King, R.; Cobb, S.; Whitaker, Ann F. (Technical Monitor)

    2001-01-01

    The first Materials Science Research Rack (MSRR-1) will accommodate dual Experiment Modules (EM's) and provide simultaneous on-orbit processing operations capability. The first international Materials Science Experiment Module for the MSRR-1 is an international cooperative research activity between NASA's Marshall Space Flight Center (MSFC) and the European Space Agency's (ESA) European Space Research and Technology Center. (ESTEC). This International Standard Payload Rack (ISPR) will contain the Materials Science Laboratory (MSL) developed by ESA as an Experiment Module. The MSL Experiment Module will accommodate several on-orbit exchangeable experiment-specific Module Inserts. Module Inserts currently planned are a Quench Module Insert, Low Gradient Furnace, Solidification with Quench Furnace, and Diffusion Module Insert. The second Experiment Module for the MSRR-1 configuration is a commercial device supplied by MSFC's Space Products Department (SPD). It includes capabilities for vapor transport processes and liquid metal sintering. This Experiment Module will be replaced on-orbit with other NASA Materials Science EMs.

  9. 78 FR 24241 - Nanoscale Science, Engineering, and Technology Subcommittee; Committee on Technology, National...

    Science.gov (United States)

    2013-04-24

    ... TECHNOLOGY POLICY Nanoscale Science, Engineering, and Technology Subcommittee; Committee on Technology, National Science and Technology Council; Notice of Public Meeting AGENCY: Executive Office of the President, Office of Science and Technology Policy. ACTION: Notice of Public Meeting. SUMMARY: The...

  10. 77 FR 61448 - Nanoscale Science, Engineering and Technology Subcommittee Committee on Technology, National...

    Science.gov (United States)

    2012-10-09

    ... TECHNOLOGY POLICY Nanoscale Science, Engineering and Technology Subcommittee Committee on Technology, National Science and Technology Council; Public Meetings AGENCY: Executive Office of the President, Office of Science and Technology Policy. ACTION: Notice of Public Meetings. SUMMARY: The...

  11. 77 FR 13159 - Nanoscale Science, Engineering, and Technology Subcommittee of the Committee on Technology...

    Science.gov (United States)

    2012-03-05

    ... TECHNOLOGY POLICY Nanoscale Science, Engineering, and Technology Subcommittee of the Committee on Technology, National Science and Technology Council Workshop ACTION: Notice of public meeting. SUMMARY: The National Nanotechnology Coordination Office (NNCO), on behalf of the Nanoscale Science, Engineering, and Technology...

  12. JPRS Report, Science & Technology, USSR: Life Sciences.

    Science.gov (United States)

    1988-03-16

    on is the extremely subtle opera- tion of isolating enzymes from the virus of malignant tumors in poultry. The enzyme is used as a raw material...manuscript received 27 Apr 87) pp 42-43 [Article by L.N. Sidarcnko and A.Yu. Sadov, Depart- ment of Surgery No. 1 (headed by Professor L.N. Sida - renko

  13. Laser Science and Technology Program Update 2002

    Energy Technology Data Exchange (ETDEWEB)

    Hackel, L A; Chen, H L

    2003-03-01

    The Laser Science and Technology (LS&T) Program's mission is to develop advanced lasers, optics, materials technologies, and applications to solve problems and create new capabilities of importance to the nation and the Laboratory. A top, near-term priority is to provide technical support in the deployment and upgrade of the National Ignition Facility (NIF). Our other program activities synergistically develop technologies that are of interest to the NIF Directorate but outside the scope of the NIF funding. The primary objectives of LS&T activities in 2002 have been fourfold--(a) to support deployment of hardware and to enhance laser and optics performance for NIF, (b) to develop high-energy petawatt laser science and technology for the Department of Energy (DOE), (c) to develop advanced solid-state laser systems and optical components for the Department of Defense (DoD), and to invent develop, and deliver improved concepts and hardware for other government agencies and industry. Special efforts have been devoted to building and maintaining our capabilities in three technology areas: high-power short-pulse solid-state lasers, high-power optical materials, and applications of advanced lasers. LS&T activities during 2002 focused on seven major areas: (1) NIF Project--LS&T led major advances in the deployment of NIF Final Optics Assembly (FOA) and the development of 3{omega} optics processing and treatment technologies to enhance NIF's operations and performance capabilities. (2) Stockpile Stewardship Program (SSP)--LS&T personnel continued development of ultrashort-pulse lasers and high-power, large-aperture optics for applications in SSP, extreme-field science and national defense. To enhance the high-energy petawatt (HEPW) capability in NIF, LS&T continued development of advanced compressor-grating and front-end laser technologies utilizing optical-parametric chirped-pulse amplification (OPCPA). (3) High-energy-density physics and inertial fusion energy

  14. Laser Science and Technology Program Update 2002

    Energy Technology Data Exchange (ETDEWEB)

    Hackel, L A; Chen, H L

    2003-03-01

    The Laser Science and Technology (LS&T) Program's mission is to develop advanced lasers, optics, materials technologies, and applications to solve problems and create new capabilities of importance to the nation and the Laboratory. A top, near-term priority is to provide technical support in the deployment and upgrade of the National Ignition Facility (NIF). Our other program activities synergistically develop technologies that are of interest to the NIF Directorate but outside the scope of the NIF funding. The primary objectives of LS&T activities in 2002 have been fourfold--(a) to support deployment of hardware and to enhance laser and optics performance for NIF, (b) to develop high-energy petawatt laser science and technology for the Department of Energy (DOE), (c) to develop advanced solid-state laser systems and optical components for the Department of Defense (DoD), and to invent develop, and deliver improved concepts and hardware for other government agencies and industry. Special efforts have been devoted to building and maintaining our capabilities in three technology areas: high-power short-pulse solid-state lasers, high-power optical materials, and applications of advanced lasers. LS&T activities during 2002 focused on seven major areas: (1) NIF Project--LS&T led major advances in the deployment of NIF Final Optics Assembly (FOA) and the development of 3{omega} optics processing and treatment technologies to enhance NIF's operations and performance capabilities. (2) Stockpile Stewardship Program (SSP)--LS&T personnel continued development of ultrashort-pulse lasers and high-power, large-aperture optics for applications in SSP, extreme-field science and national defense. To enhance the high-energy petawatt (HEPW) capability in NIF, LS&T continued development of advanced compressor-grating and front-end laser technologies utilizing optical-parametric chirped-pulse amplification (OPCPA). (3) High-energy-density physics and inertial fusion energy

  15. The Science of Smart Materials

    Science.gov (United States)

    Boohan, Richard

    2011-01-01

    Over the last few decades, smart materials have become increasingly important in the design of products. Essentially, a smart material is one that has been designed to respond to a stimulus, such as a change in temperature or magnetic field, in a particular and useful way. This article looks at a range of smart materials that are relatively…

  16. JPRS Report, Science & Technology, USSR: Life Sciences.

    Science.gov (United States)

    1987-06-23

    creation of a stable fodder base, an enhancement of soil fertility and an improvement in horticulture and so forth, and finally in the field of...human cells is performed to study regulatory mechanisms of gene expression and to provide materials for gene therapy . One promising object for...A.N. Belozerskiy, Moscow State University lmeni M.V. Lomonosov; Chair of Pharmacology of the Therapy and Sanitary-Hygiene Faculty, 1st Moscow Medical

  17. Science and technology: socialising what for whom?

    Directory of Open Access Journals (Sweden)

    Sally Wyatt

    2009-09-01

    Full Text Available In the Handbook on the socialisation of scientific and technological research, edited by Wiebe Bijker and Luciano d’Andrea, ‘socialisation’ is used to both describe and prescribe the ways in which science and technology are used in society. In this comment, ‘socialisation’ is discussed from two other points of view. First, the ways in which science and technology are sometimes used to organize, structure and dominate the social are identified. Second, drawing on Merton’s norms of science, an argument is made against over-socialising science and in favour of acknowledging and preserving the ‘special’ nature of science, for its own sake and because, at its best, science can offer an alternative model for other social activities.

  18. The metrics of science and technology

    CERN Document Server

    Geisler, Eliezer

    2000-01-01

    Dr. Geisler's far-reaching, unique book provides an encyclopedic compilation of the key metrics to measure and evaluate the impact of science and technology on academia, industry, and government. Focusing on such items as economic measures, patents, peer review, and other criteria, and supported by an extensive review of the literature, Dr. Geisler gives a thorough analysis of the strengths and weaknesses inherent in metric design, and in the use of the specific metrics he cites. His book has already received prepublication attention, and will prove especially valuable for academics in technology management, engineering, and science policy; industrial R&D executives and policymakers; government science and technology policymakers; and scientists and managers in government research and technology institutions. Geisler maintains that the application of metrics to evaluate science and technology at all levels illustrates the variety of tools we currently possess. Each metric has its own unique strengths and...

  19. JPRS Report, Science & Technology, USSR: Science & Technology Policy.

    Science.gov (United States)

    2007-11-02

    rubric "Science: Why Is Path of Developments of Scientists So Long and Thorny?": "Introduction in the Tentacles of the Octopus "] [Text] About three...mass of deep-seated depart- mental interests, which, like the tentacles of an octopus , always and inexorably held back locally the introduction of...smooth muscles of blood vessels, were extracted from the brain in a pure state. At the Institute of Geological Sciences detailed fault maps of the

  20. Technology for NASA's Planetary Science Vision 2050.

    Science.gov (United States)

    Lakew, B.; Amato, D.; Freeman, A.; Falker, J.; Turtle, Elizabeth; Green, J.; Mackwell, S.; Daou, D.

    2017-01-01

    NASAs Planetary Science Division (PSD) initiated and sponsored a very successful community Workshop held from Feb. 27 to Mar. 1, 2017 at NASA Headquarters. The purpose of the Workshop was to develop a vision of planetary science research and exploration for the next three decades until 2050. This abstract summarizes some of the salient technology needs discussed during the three-day workshop and at a technology panel on the final day. It is not meant to be a final report on technology to achieve the science vision for 2050.

  1. Biomimetics in materials science self-healing, self-lubricating, and self-cleaning materials

    CERN Document Server

    Nosonovsky, Michael

    2012-01-01

    Biomimetics in Materials Science provides a comprehensive theoretical and practical review of biomimetic materials with self-healing, self-lubricating and self-cleaning properties. These three topics are closely related and constitute rapidly developing areas of study. The field of self-healing materials requires a new conceptual understanding of this biomimetic technology, which is in contrast to traditional  engineering processes such as wear and fatigue.  Biomimetics in Materials Science is the first monograph to be devoted to these materials. A new theoretical framework for these processes is presented based on the concept of multi-scale structure of entropy and non-equilibrium thermodynamics, together with a detailed review of the available technology. The latter includes experimental, modeling, and simulation results obtained on self-healing/lubricating/cleaning materials since their emergence in the past decade. Describes smart, biomimetic materials in the context of nanotechnology, biotechnology, an...

  2. Science, Technology, and YA Lit

    Science.gov (United States)

    Clemmons, Karina; Sheehy, Colleen

    2011-01-01

    Science teachers today need engaging projects to help students build 21st-century skills (NSTA 2011). Contemporary young adult literature (YA lit) can form the basis of one such project. YA lit--a genre of fiction geared toward 2 to 20-year-olds--opens a powerful avenue to connect with students and cover science topics in greater depth. YA lit is…

  3. Recent progress in hybrid materials science.

    Science.gov (United States)

    Sanchez, Clément; Shea, Kenneth J; Kitagawa, Susumu

    2011-02-01

    This themed issue of Chemical Society Reviews reviews recent progress made in hybrid materials science. Guest editors Clément Sanchez, Susumu Kitagawa and Ken Shea introduce the issue and the academic and industrial importance of the field.

  4. Overview of HVEM Investigations in Materials Science

    Directory of Open Access Journals (Sweden)

    Hirotaro Mori

    2011-12-01

    Full Text Available High-voltage electron microscopy possesses a number of advantages that cannot be afforded by conventional electron microscopy. Topics in recent investigations with HVEMs in materials science are reviewed.

  5. Medipix3 CT for material sciences

    Science.gov (United States)

    Procz, S.; Wartig, K.-A.; Fauler, A.; Zwerger, A.; Luebke, J.; Ballabriga, R.; Blaj, G.; Campbell, M.; Mix, M.; Fiederle, M.

    2013-01-01

    Innovative detector systems for non-destructive material analysis and for medical diagnosis are an important development to improve the performance and the quality of examination methods. For a number of years now photon-counting X-ray detectors are being developed to process incoming X-ray photons as single events. These detectors facilitate a higher signal-to-noise ratio (SNR) than conventional, non-photon-counting, scintillator based detector systems, which detect X-ray photons indirectly through conversion into visible light. The Medipix is a pixelated photon counting semiconductor detector which features adjustable energy thresholds allowing energy selective, multispectral X-ray imaging. The Medipix chip is under continued development by the ``Medipix2 Collaboration'' and ``Medipix3 Collaboration'' at CERN [1]. The Medipix electronic offers 256 × 256 pixels with a pixel pitch of 55 × 55 μm2 and can be hybridized with different sensor materials like Si, CdTe or GaAs. The newest member of the Medipix family is the Medipix3 (ASIC in 0.13 μm CMOS technology) providing up to eight separate 12-bit counters per pixel. It offers a couple of different working modes [2], which are useful for X-ray imaging applications. A Medipix3 CT X-ray measuring station was built up for small animal X-ray imaging and non-destructive material analysis [3]. The combination of the low energy threshold ( ~ 4 keV) of the Medipix3 with its multispectral capability enables tomographic investigations on objects with low absorption contrast. The advantage of photon counting, multispectral detectors like Medipix3 for material sciences will be presented here as well as a comparison with a scintillator based CT.

  6. Computational materials science: Nanoscale plasticity

    DEFF Research Database (Denmark)

    Jacobsen, Karsten Wedel; Schiøtz, Jakob

    2002-01-01

    How does plastic deformation of polycrystalline materials with grain sizes less than 100 nm look at the atomic scale? A large-scale molecular dynamics simulation of nanocrystalline alluminium reveals some surprising behaviour.......How does plastic deformation of polycrystalline materials with grain sizes less than 100 nm look at the atomic scale? A large-scale molecular dynamics simulation of nanocrystalline alluminium reveals some surprising behaviour....

  7. Science, Technology and Arts Research Journal

    African Journals Online (AJOL)

    Science, Technology and Arts Research Journal ... Determination of Nutritive Value and Mineral Elements of Some Species of Genus Memecylon Linn. ... towards Gender and Intimate Partner Violence Against Women in Eastern Ethiopia: A ...

  8. International Journal of Engineering, Science and Technology

    African Journals Online (AJOL)

    IJEST publishes articles that emphasizes research, development and application within the fields of engineering, science and technology. ... Other sites related to this journal: http://www.ijest-ng.com/ ... Rahul Singh, Dhirendra Patel, 1-10 ...

  9. [Plasma technology for biomedical material applications].

    Science.gov (United States)

    Liu, Z; Li, X

    2000-03-01

    In this paper is introduced the plasma technology for the applications of several species biomaterial such as ophthalmological material, drug delivery system, tissue culture material, blood anticoagulant material as well as plasma surface clearing and plasma sterilization, and so on.

  10. Communicating English for Science and Technology

    DEFF Research Database (Denmark)

    Mousten, Birthe

    The book introduces and discusses some of the ideas, stylistics, methods, aids and conventions used in English for Science and Technology. The book centres on a mix of theoretical considerations, examples, drills and texts.......The book introduces and discusses some of the ideas, stylistics, methods, aids and conventions used in English for Science and Technology. The book centres on a mix of theoretical considerations, examples, drills and texts....

  11. Open Bibliography for Science, Technology, and Medicine

    Directory of Open Access Journals (Sweden)

    Jones Richard

    2011-10-01

    Full Text Available Abstract The concept of Open Bibliography in science, technology and medicine (STM is introduced as a combination of Open Source tools, Open specifications and Open bibliographic data. An Openly searchable and navigable network of bibliographic information and associated knowledge representations, a Bibliographic Knowledge Network, across all branches of Science, Technology and Medicine, has been designed and initiated. For this large scale endeavour, the engagement and cooperation of the multiple stakeholders in STM publishing - authors, librarians, publishers and administrators - is sought.

  12. Open bibliography for science, technology, and medicine.

    Science.gov (United States)

    Jones, Richard; Macgillivray, Mark; Murray-Rust, Peter; Pitman, Jim; Sefton, Peter; O'Steen, Ben; Waites, William

    2011-10-14

    The concept of Open Bibliography in science, technology and medicine (STM) is introduced as a combination of Open Source tools, Open specifications and Open bibliographic data. An Openly searchable and navigable network of bibliographic information and associated knowledge representations, a Bibliographic Knowledge Network, across all branches of Science, Technology and Medicine, has been designed and initiated. For this large scale endeavour, the engagement and cooperation of the multiple stakeholders in STM publishing - authors, librarians, publishers and administrators - is sought.

  13. Communicating English for Science and Technology

    DEFF Research Database (Denmark)

    Mousten, Birthe

    The book introduces and discusses some of the ideas, stylistics, methods, aids and conventions used in English for Science and Technology. The book centres on a mix of theoretical considerations, examples, drills and texts.......The book introduces and discusses some of the ideas, stylistics, methods, aids and conventions used in English for Science and Technology. The book centres on a mix of theoretical considerations, examples, drills and texts....

  14. Communicating in English for Science and Technology

    DEFF Research Database (Denmark)

    Mousten, Birthe

    Communicating in English for Science and Technology covers some of the most important questions in connection with communication models, stylistics and genre conventions within the area of English used in science and technology texts. Moreover,knowledge management, terminology management and data...... and database management principles are included as a means to create consistent writing. Other means of help, such as manuals of style and the adoption of a language policy in corporate life, are included, too....

  15. JPRS Report, Science & Technology, USSR: Science & Technology Policy.

    Science.gov (United States)

    2007-11-02

    CEMA Comprehensive Program [EKONOMICHESKOYE SOTRUDNICHESTVO STRAN-CHLENOV SEV] 16 Science, Production in GDR Combines [K Rudolf, EKONOM1CHESKOYE...SOTRUDNICHESTVO STRAN-CHLENOV SEV] 22 Footnotes 26 Cooperation of CEMA Countries in Technical Innovation 27 Scientific Production Cooperation of... CEMA Countries 32 Footnote 35 CEMA Cooperation In Medical Instrument Making [Y. Sinyakov, EKONOMICHESKOYE SOTRUDNICHESTVO STRAN-CHLENOV SEV No 1

  16. JPRS Report, Science & Technology, USSR: Science & Technology Policy

    Science.gov (United States)

    1988-09-23

    Sciences Rudolf Muradovich Muradyan, head of a group of the Byurakan Astrophysics Observatory—for the series of works "A New Quantum Number—the Color and...Kolonitskiy, and L.B. Makarevich, heads of divisions, Yu.A. Kaplan, N.Z. Peskin , and M.V. Tsuranov, chief project designers, V.A. Olekhnovich and

  17. Sscience & technology review; Science Technology Review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This review is published ten times a year to communicate, to a broad audience, Lawrence Livermore National Laboratory`s scientific and technological accomplishments, particularly in the Laboratory`s core mission areas - global security, energy and the environment, and bioscience and biotechnology. This review for the month of July 1996 discusses: Frontiers of research in advanced computations, The multibeam Fabry-Perot velocimeter: Efficient measurement of high velocities, High-tech tools for the American textile industry, and Rock mechanics: can the Tuff take the stress.

  18. Understanding Materials Science History · Properties · Applications

    CERN Document Server

    Hummel, Rolf E

    2005-01-01

    This introduction to materials science both for students of engineering and physics and for the interested general public examines not only the physical and engineering properties of virtually all kinds of materials, but also their history, uses, development, and some of the implications of resource depletion and recycling. It covers all topics on materials from an entirely novel perspective: the role materials have played throughout history in the development of humankind and technologies. Specifically, it shows the connection between the technical and the cultural, economic, ecological, and societal aspects of materials science. It aims to whet the appetite of its readers and inspire them to further explore the properties and applications of metals, alloys, ceramics, plastics, and electronic materials by presenting easily understandable explanations and entertaining historical facts. It is also intended to raise the reader’s awareness of their obligations to society as practicing engineers and scientists....

  19. FWP executive summaries, Basic Energy Sciences Materials Sciences Programs (SNL/NM)

    Energy Technology Data Exchange (ETDEWEB)

    Samara, G.A.

    1997-05-01

    The BES Materials Sciences Program has the central theme of Scientifically Tailored Materials. The major objective of this program is to combine Sandia`s expertise and capabilities in the areas of solid state sciences, advanced atomic-level diagnostics and materials synthesis and processing science to produce new classes of tailored materials as well as to enhance the properties of existing materials for US energy applications and for critical defense needs. Current core research in this program includes the physics and chemistry of ceramics synthesis and processing, the use of energetic particles for the synthesis and study of materials, tailored surfaces and interfaces for materials applications, chemical vapor deposition sciences, artificially-structured semiconductor materials science, advanced growth techniques for improved semiconductor structures, transport in unconventional solids, atomic-level science of interfacial adhesion, high-temperature superconductors, and the synthesis and processing of nano-size clusters for energy applications. In addition, the program includes the following three smaller efforts initiated in the past two years: (1) Wetting and Flow of Liquid Metals and Amorphous Ceramics at Solid Interfaces, (2) Field-Structured Anisotropic Composites, and (3) Composition-Modulated Semiconductor Structures for Photovoltaic and Optical Technologies. The latter is a joint effort with the National Renewable Energy Laboratory. Separate summaries are given of individual research areas.

  20. JPRS Report, Science & Technology, China

    Science.gov (United States)

    2007-11-02

    energy conservation technology focused on aluminum and poly- metallic paragenetic mineral comprehensive utilization technology, provide technical...the advantage of fewer steps and higher yield as compared to the classical method. Anhydrous aluminum trichloride has been used to catalyze the...solid fragrance preparations and deodorant etc. It is commonly synthesized by cyclic trim- erization of isobutyraldehyde in the presence of

  1. JPRS Report, Science & Technology, Japan

    Science.gov (United States)

    2007-11-02

    energy conservation technology R&D: (international cooperation on S&T related high- efficency gas turbines, new batteries, to mining and manufacturing...297 20. Nuclear Energy Peace-Use Technology ...... 301 Part 1. Research Plans of the Government Industrial 21. Environmental Pollution...25 Scale Project) .............................................. 359 (2) Mechanical Engineering Lab ....................... 28 2. New Energy

  2. JPRS Report, Science & Technology, USSR: Science & Technology Policy

    Science.gov (United States)

    2007-11-02

    than we have for their 32-bit computer, including portable computers, transpu- ters, thermomagnetooptic and simply optic disks, laser and liquid ...of coarse fodders by ruminants are the second direction of research. This work is of enormous economic impor- tance. The point is that the basic...Synthesis) to Candidate of Chemical Sciences Yu.A. Maurinsh. For the series of works "The Electrode and Transport Properties of Liquid Membranes Based on

  3. Politicizing science: conceptions of politics in science and technology studies.

    Science.gov (United States)

    Brown, Mark B

    2015-02-01

    This essay examines five ideal-typical conceptions of politics in science and technology studies. Rather than evaluating these conceptions with reference to a single standard, the essay shows how different conceptions of politics serve distinct purposes: normative critique, two approaches to empirical description, and two views of democracy. I discuss each conception of politics with respect to how well it fulfills its apparent primary purpose, as well as its implications for the purpose of studying a key issue in contemporary democratic societies: the politicization of science. In this respect, the essay goes beyond classifying different conceptions of politics and also recommends the fifth conception as especially conducive to understanding and shaping the processes whereby science becomes a site or object of political activity. The essay also employs several analytical distinctions to help clarify the differences among conceptions of politics: between science as 'political' (adjective) and science as a site of 'politics' (noun), between spatial-conceptions and activity-conceptions of politics, between latent conflicts and actual conflicts, and between politics and power. The essay also makes the methodological argument that the politics of science and technology is best studied with concepts and methods that facilitate dialogue between actors and analysts. The main goal, however, is not to defend a particular view of politics, but to promote conversation on the conceptions of politics that animate research in social studies of science and technology.

  4. Computational Materials Science and Chemistry: Accelerating Discovery and Innovation through Simulation-Based Engineering and Science

    Energy Technology Data Exchange (ETDEWEB)

    Crabtree, George [Argonne National Lab. (ANL), Argonne, IL (United States); Glotzer, Sharon [University of Michigan; McCurdy, Bill [University of California Davis; Roberto, Jim [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2010-07-26

    This report is based on a SC Workshop on Computational Materials Science and Chemistry for Innovation on July 26-27, 2010, to assess the potential of state-of-the-art computer simulations to accelerate understanding and discovery in materials science and chemistry, with a focus on potential impacts in energy technologies and innovation. The urgent demand for new energy technologies has greatly exceeded the capabilities of today's materials and chemical processes. To convert sunlight to fuel, efficiently store energy, or enable a new generation of energy production and utilization technologies requires the development of new materials and processes of unprecedented functionality and performance. New materials and processes are critical pacing elements for progress in advanced energy systems and virtually all industrial technologies. Over the past two decades, the United States has developed and deployed the world's most powerful collection of tools for the synthesis, processing, characterization, and simulation and modeling of materials and chemical systems at the nanoscale, dimensions of a few atoms to a few hundred atoms across. These tools, which include world-leading x-ray and neutron sources, nanoscale science facilities, and high-performance computers, provide an unprecedented view of the atomic-scale structure and dynamics of materials and the molecular-scale basis of chemical processes. For the first time in history, we are able to synthesize, characterize, and model materials and chemical behavior at the length scale where this behavior is controlled. This ability is transformational for the discovery process and, as a result, confers a significant competitive advantage. Perhaps the most spectacular increase in capability has been demonstrated in high performance computing. Over the past decade, computational power has increased by a factor of a million due to advances in hardware and software. This rate of improvement, which shows no sign of

  5. Advances in software science and technology

    CERN Document Server

    Ohno, Yoshio; Kamimura, Tsutomu

    1991-01-01

    Advances in Software Science and Technology, Volume 2 provides information pertinent to the advancement of the science and technology of computer software. This book discusses the various applications for computer systems.Organized into four parts encompassing 12 chapters, this volume begins with an overview of categorical frameworks that are widely used to represent data types in computer science. This text then provides an algorithm for generating vertices of a smoothed polygonal line from the vertices of a digital curve or polygonal curve whose position contains a certain amount of error. O

  6. OMICs Technologies Tools for Food Science

    CERN Document Server

    Benkeblia, Noureddine

    2012-01-01

    Since the completion of the Human Genome Project, food and nutrition sciences have undergone a fundamental molecular transformation. New discoveries in molecular biology, analytical chemistry, and biochemistry have led to the development of new tools that are likely to revolutionize the study of food. OMICS Technologies: Tools for Food Science explores how these tools reveal the fundamental pathways and biochemical processes that drive food and nutrition sciences. In this volume, an international panel of researchers examines the rise of these new technologies--including metabolomics, metageno

  7. High temperature vapors science and technology

    CERN Document Server

    Hastie, John

    2012-01-01

    High Temperature Vapors: Science and Technology focuses on the relationship of the basic science of high-temperature vapors to some areas of discernible practical importance in modern science and technology. The major high-temperature problem areas selected for discussion include chemical vapor transport and deposition; the vapor phase aspects of corrosion, combustion, and energy systems; and extraterrestrial high-temperature species. This book is comprised of seven chapters and begins with an introduction to the nature of the high-temperature vapor state, the scope and literature of high-temp

  8. JPRS Report, Science & Technology China

    Science.gov (United States)

    1989-02-23

    Protoplast Culture of Rice (Oryza sativa L.), Plant Regeneration From Protoplast-Derived Calli 40091011a Beijing YICHUAN XUEBAO [ACTA GENETICA ...M.W., et al., PLANTA, Vol 157, 1983 p 385. Power, J.B., Cocking, E.C., SCIENCE PROGRESS, Vol 59, 1971 p 181. Thompson , J.A., et al., PLANT SCIENCE...YICHUAN XUEBAO [ACTA GENETICA SINICA] in Chinese Vol 15 No 5, Oct 88 pp 329-334 [English abstract of article by Tao Zirong [7118 5261 2837], et al

  9. Materials, critical materials and clean-energy technologies

    Science.gov (United States)

    Eggert, R.

    2017-07-01

    Modern engineered materials, components and systems depend on raw materials whose properties provide essential functionality to these technologies. Some of these raw materials are subject to supply-chain risks, and such materials are known as critical materials. This paper reviews corporate, national and world perspectives on material criticality. It then narrows its focus to studies that assess "what is critical" to clean-energy technologies. The focus on supply-chain risks is not meant to be alarmist but rather to encourage attention to monitoring these risks and pursuing technological innovation to mitigate the risks.

  10. Science, Technology, & Human Values. Issue No. 26.

    Science.gov (United States)

    Shelanski, Vivien B., Ed.; La Follette, Marcel C., Ed.

    This issue contains articles on the recombinant DNA controversy, the ethical principles of scientific institutions, and the effect of disaster novels on public opinion and technology assessment, as well as a guide to funding for science, technology and values projects, and a bibliography on professional ethics. In addition, 14 pages of news items…

  11. Teaching Science and Technology Issues: Curriculum Perspectives.

    Science.gov (United States)

    Kumar, David

    1997-01-01

    Discusses problems in teaching science and technology from a societal perspective if not handled with prudence. The misapplication of scientific and technological knowledge in Nazi Germany in World War II is explored in particular. Suggests that an issue-oriented education is needed to help students gain an overall understanding of scientific…

  12. National Science Board Urges "Peace" Technology

    Science.gov (United States)

    Physics Today, 1972

    1972-01-01

    Presents the five recommendations of the National Science Board in its fourth annual report to Congress. The report, The Role of Engineers and Scientists in a National Policy for Technology,'' calls for a strong commitment to the technologies of peace and is available from the United States Government Printing Office. (PR)

  13. 20. AINSE plasma science and technology conference. Conference handbook

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The 20th AINSE plasma science and technology conference was held at Flinders University of South Australia on 13-14 February 1995. Topics under discussion included plasma physics studies, current status of rotamak devices, plasma processing and material studies. The handbook contains the conference program, 54 abstracts and a list of participants.

  14. JPRS Report, Science & Technology, USSR: Science & Technology Policy

    Science.gov (United States)

    2007-11-02

    technology of producing cement from a waste product of chemical plants— phosphogypsum . Tens of millions of tons of it have accumulated on the... phosphogypsum amounts to only a tenth of a percent. Another development of scientists on the use of a waste product of the hydrolytic process—lignin—also

  15. BUILDING MATERIAL SUPPORT FOR TEACHING OF MATERIALS SCIENCE

    Directory of Open Access Journals (Sweden)

    Jesús García-Lira

    2015-07-01

    Full Text Available The present work shows a number of materials that have processor is presented to facilitate and enhance the learning process of the subject of materials science by students who are studying mechanical engineering, with the always present possibility of use in other common or related field. These materials can be accessible to students in the virtual field, as new more active and participatory teaching methodologies focused on learning are presented.

  16. Carbon Nanotubes: Miracle of Materials Science?

    Science.gov (United States)

    Files, Bradley S.; Mayeaux, Brian M.

    1999-01-01

    Article to be sent to Advanced Materials and Processes, journal of ASM International, as attached. This is a news-type technical journal for a large organization of scientists, engineers, salesmen, and managers. The article is quite general, meant to be an introduction to the properties of nanotubes. This is a materials science organization, therefore the article is geared toward using nanotubes for materials uses. Pictures have not been included in this version.

  17. Science and Technology Review, November 1998

    Energy Technology Data Exchange (ETDEWEB)

    Eimerl, D.

    1998-11-01

    Lawrence Livermore National Laboratory is operated by the University of California for the Department of Energy. At Livermore, we focus science and technology on assuring our nationÕs security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published 10 times a year to communicate, to a broad audience, the LaboratoryÕs scientific and technological accomplishments in fulfilling its primary missions. The publicationÕs goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

  18. Science & Technology Review October/November 2015

    Energy Technology Data Exchange (ETDEWEB)

    Orme, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotta, P. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-11-05

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

  19. Science & Technology Review January/February 2017

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, R. L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, C. N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotta, P. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-01-12

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

  20. Science & Technology Review January/February 2016

    Energy Technology Data Exchange (ETDEWEB)

    Orme, C. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, C. N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotta, P. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-01-18

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

  1. Science and Technology Review, December 1998

    Energy Technology Data Exchange (ETDEWEB)

    Eimerl, D.

    1998-12-01

    Lawrence Livermore National Laboratory is operated by the University of California for the Department of Energy. At Livermore, we focus science and technology on assuring our nationÕs security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published 10 times a year to communicate, to a broad audience, the LaboratoryÕs scientific and technological accomplishments in fulfilling its primary missions. The publicationÕs goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world.

  2. Japan Report, Science and Technology.

    Science.gov (United States)

    2007-11-02

    2 microns for grinding, 1.5 microns for polishing, and 0.3 microns for polishing. Figure 3 shows various types of artificial bioceramic materials...materi als of long bones tificial finger"joints Figure 3. Areas of Application of Artificial Bones and Joints Made of Bioceramics Onishi examined

  3. China Report, Science and Technology.

    Science.gov (United States)

    2007-11-02

    organizations to improve people’s living and working conditions and dissuade them from smoking, drinking excessively and eating too many pickled and...the use of titanium alloys, molybdenum alloys, as well as graphite composite materials, fiber glass and other non-metallic materials; in the area of

  4. JPRS Report, Science & Technology, USSR: Science & Technology Policy

    Science.gov (United States)

    2007-11-02

    local bitumen deposits. In our country, incidentally, bitumen matters are being worked on actively. Everyone must gather at a "round table" and look at...elements of the periodic table. Now nearly half of the whey goes into the sewer system. But it is possible to extract from it not only high quality...science, but a stream of words with regard to the "enormous importance" of one study or another, which is uttered merely for the sake of extracting as

  5. Science and Technology of Future Light Sources

    Energy Technology Data Exchange (ETDEWEB)

    Dierker,S.; Bergmann, U.; Corlett, J.; Dierker, S.; Falcone, R.; Galayda, J.; Gibson, M.; Hastings, J.; Hettel, B.; Hill, J.; Hussain, Z.; Kao, C.-C.; Kirx, J.; Long, G.; McCurdy, B.; Raubenheimer, T.; Sannibale, F.; Seeman, J.; Shen, Z.-X.; Shenoy, g.; Schoenlein, B.; Shen, Q.; Stephenson, B.; Stohr, J.; Zholents, A.

    2008-12-01

    Many of the important challenges facing humanity, including developing alternative sources of energy and improving health, are being addressed by advances that demand the improved understanding and control of matter. While the visualization, exploration, and manipulation of macroscopic matter have long been technological goals, scientific developments in the twentieth century have focused attention on understanding matter on the atomic scale through the underlying framework of quantum mechanics. Of special interest is matter that consists of natural or artificial nanoscale building blocks defined either by atomic structural arrangements or by electron or spin formations created by collective correlation effects. The essence of the challenge to the scientific community has been expressed in five grand challenges for directing matter and energy recently formulated by the Basic Energy Sciences Advisory Committee [1]. These challenges focus on increasing our understanding of, and ultimately control of, matter at the level of atoms, electrons. and spins, as illustrated in Figure 1.1, and serve the entire range of science from advanced materials to life sciences. Meeting these challenges will require new tools that extend our reach into regions of higher spatial, temporal, and energy resolution. X-rays with energies above 10 keV offer capabilities extending beyond the nanoworld shown in Figure 1.1 due to their ability to penetrate into optically opaque or thick objects. This opens the door to combining atomic level information from scattering studies with 3D information on longer length scales from real space imaging with a resolution approaching 1 nm. The investigation of multiple length scales is important in hierarchical structures, providing knowledge about function of living organisms, the atomistic origin of materials failure, the optimization of industrial synthesis, or the working of devices. Since the fundamental interaction that holds matter together is of

  6. Science and Technology of Future Light Sources

    Energy Technology Data Exchange (ETDEWEB)

    Bergmann, Uwe; Corlett, John; Dierker, Steve; Falcone, Roger; Galayda, John; Gibson, Murray; Hastings, Jerry; Hettel, Bob; Hill, John; Hussain, Zahid; Kao, Chi-Chang; Kirz, Janos; Long, Danielle; McCurdy, Bill; Raubenheimer, Tor; Sannibale, Fernando; Seeman, John; Shen, Z. -X.; Schenoy, Gopal; Schoenlein, Bob; Shen, Qun; Stephenson, Brian; Stohr, Joachim; Zholents, Alexander

    2009-01-28

    Many of the important challenges facing humanity, including developing alternative sources of energy and improving health, are being addressed by advances that demand the improved understanding and control of matter. While the visualization, exploration, and manipulation of macroscopic matter have long been technological goals, scientific developments in the twentieth century have focused attention on understanding matter on the atomic scale through the underlying framework of quantum mechanics. Of special interest is matter that consists of natural or artificial nanoscale building blocks defined either by atomic structural arrangements or by electron or spin formations created by collective correlation effects The essence of the challenge to the scientific community has been expressed in five grand challenges for directing matter and energy recently formulated by the Basic Energy Sciences Advisory Committee. These challenges focus on increasing our understanding of, and ultimately control of, matter at the level of atoms, electrons. and spins, as illustrated in Figure 1.1, and serve the entire range of science from advanced materials to life sciences. Meeting these challenges will require new tools that extend our reach into regions of higher spatial, temporal, and energy resolution. X-rays with energies above 10 keV offer capabilities extending beyond the nanoworld shown in Figure 1.1 due to their ability to penetrate into optically opaque or thick objects. This opens the door to combining atomic level information from scattering studies with 3D information on longer length scales from real space imaging with a resolution approaching 1 nm. The investigation of multiple length scales is important in hierarchical structures, providing knowledge about function of living organisms, the atomistic origin of materials failure, the optimization of industrial synthesis, or the working of devices. Since the fundamental interaction that holds matter together is of

  7. Overview of NASA's Microgravity Materials Science Program

    Science.gov (United States)

    Downey, James Patton

    2012-01-01

    The microgravity materials program was nearly eliminated in the middle of the aughts due to budget constraints. Hardware developments were eliminated. Some investigators with experiments that could be performed using ISS partner hardware received continued funding. Partnerships were established between US investigators and ESA science teams for several investigations. ESA conducted peer reviews on the proposals of various science teams as part of an ESA AO process. Assuming he or she was part of a science team that was selected by the ESA process, a US investigator would submit a proposal to NASA for grant funding to support their part of the science team effort. In a similar manner, a US materials investigator (Dr. Rohit Trivedi) is working as a part of a CNES selected science team. As funding began to increase another seven materials investigators were selected in 2010 through an NRA mechanism to perform research related to development of Materials Science Research Rack investigations. One of these has since been converted to a Glovebox investigation.

  8. Science and Technology Helps Farmers Get Rich

    Institute of Scientific and Technical Information of China (English)

    JENNIFER LIM

    1994-01-01

    LAIZHOU City in Shandong Province is situated in the northwest Jiaodong Peninsula of Bohai Bay. In the past ten years, the development of agricultural science and technology, especially folk scientific and technological institutions, which are engaged in scientific research according to market demands, and have carried out production, management, promotion of agricultural technology and services, and have helped to quickly develop poor agricultural areas. The women of Laizhou are a vital new force in this cause.

  9. JPRS Report, Science & Technology, USSR: Science & Technology Policy

    Science.gov (United States)

    2007-11-02

    other development is of a completely different sort: This is a laser for the treatment of glaucoma . Today in our country only Doctor S. Fedorov at...biotechnology, molecular genetics , robotic systems, machine building technology, the economics of population and demography, and other leading directions of...and optimize working conditions at hazardous production facilities. The discovery of the phenomenon of two-parent heredity of genetic determinants

  10. Roadmap for Process Equipment Materials Technology

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2003-10-01

    This Technology Roadmap addresses the ever-changing material needs of the chemical and allied process industries, and the energy, economic and environmental burdens associated with corrosion and other materials performance and lifetime issues. This Technology Roadmap outlines the most critical of these R&D needs, and how they can impact the challenges facing today’s materials of construction.

  11. China Report, Science and Technology.

    Science.gov (United States)

    2007-11-02

    86) 96 Slip -Line Field Problems Solved by Method of Approach (Hu Zhong, et al.; QINGHUA DAXUE XUEBAO, No 5, Oct 86) 97 Technical Development...yarn dyeing vat automated control microcomputer, sock dyeing machinery automated control microcomputer, and the model U jet cloth dyeing automated...tÜJKtt, 1977 CSO: 4009/1082 96 APPLIED SCIENCES SLIP -LINE FIELD PROBLEMS SOLVED BY METHOD OF APPROACH Beijing QINGHUA DAXUE XUEBAO (ZIRAN KEXUE

  12. JPRS Report. Science & Technology: Japan.

    Science.gov (United States)

    2007-11-02

    prerequisite of the new materials is that the environment not be damaged . The characteristic as a fusion material is a factor to limit ways of...thermoelastic stress in the thermal stationary state has been possible up to now, we also wish to conduct an elastoplastic analysis taking into consideration...the heat history, and to establish a prestrain design on this basis. Moreover, in the future we wish to conduct analysis of elastoplastic thermal

  13. Solar cell materials developing technologies

    CERN Document Server

    Conibeer, Gavin J

    2014-01-01

    This book presents a comparison of solar cell materials, including both new materials based on organics, nanostructures and novel inorganics and developments in more traditional photovoltaic materials. It surveys the materials and materials trends in the field including third generation solar cells (multiple energy level cells, thermal approaches and the modification of the solar spectrum) with an eye firmly on low costs, energy efficiency and the use of abundant non-toxic materials.

  14. JPRS Report, Science and Technology, USSR: Science and Technology Policy.

    Science.gov (United States)

    2007-11-02

    sectorial JPRS-UST-88-007 2 May 1988 18 Organization, Planning , Coordination differences in the determination of the economic impact from completed...sub- stantially the methods of planning at the sectorial , terri- torial, and national economic levels. The sphere of material and technical supply...national economy, as well as the JPRS-UST-88-007 2 May 1988 34 Organization, Planning , Coordination performance with the participation of sectorial

  15. Chemistry and Materials Science 2004 Annual Report, Preview Edition

    Energy Technology Data Exchange (ETDEWEB)

    Shang, S; Diaz de la Rubia, T; Rennie, G

    2005-05-16

    Thriving from change is a constant element at LLNL. Through our commitment to scientific accomplishments, we have met the challenges posed by our evolving missions in 2004. It is the scientific breakthroughs that substantiate our strategic directions. Investments based on our strategic directions are bearing fruit, as illustrated in this preview of the 2004 Annual Report. We describe how our science is built around a strategic plan with four organizing themes: {sm_bullet} Materials properties and performance under extreme conditions {sm_bullet} Chemistry under extreme conditions and chemical engineering in support of national-security programs {sm_bullet} Science supporting national objectives at the intersection of chemistry, materials science, and biology {sm_bullet} Applied nuclear science for human health and national security We are particularly pleased with achievements within the 'intersection of chemistry, materials science, and biology,' an emerging area of science that may reshape the landscape of our national-security mission. CMS continues to have an unambiguous role both as a technology leader and as a partner for all of the four theme areas. We look forward to expanding the frontiers of science and continuing our partnership with the worldwide scientific community, as we firmly respond to the changing environment with agility and flexibility.

  16. Aviation environmental technology and science

    Institute of Scientific and Technical Information of China (English)

    Zhang Yanzhong

    2008-01-01

    Expatiating on the impact of aviation on the environment and aviation environmental protection projects are ex- pounded, and analyzing on the atmosphere pollution and effects on the aviation noise of aircraft discharge. Researching the approach to control aircraft exhaust pollution and noise pollution, and proposing the technology and management measures to reduce air pollution.

  17. JPRS Report; Science & Technology Japan.

    Science.gov (United States)

    2007-11-02

    be fully used at a temperature exceeding 1,350°C. References 1. Kazumori Kishi, Masaki Umebayashi, Eiji Tani, and Kazuo Kobayashi, Journal of...Recently, the Tokyo Institute of Technology, Prof. Yoshikawa , et al, has successfully developed a new polishing technique for diamond thin films. The

  18. Teaching Science with Mobile Technology

    Science.gov (United States)

    Needham, Richard

    2013-01-01

    Examples of the use of various kinds of mobile information technology are explained for use in the classroom or laboratory. Individual or group work can make use of such devices, avoiding the need to move the class to a computer room or wait for a turn to use a computer in the laboratory. Many different applications are available. This article…

  19. JPRS Report, Science & Technology Europe

    Science.gov (United States)

    1988-09-08

    duplication and promote synergy . The experts of the general management for data process- ing technology and innovation of the European Commis- sion...ones—with 7-8 vendors—are dAQess III, Mic- FORTH and Panorama (Views). To a certain extent the table also shows the life curve of software products

  20. Material Science Experiments on Mir

    Science.gov (United States)

    Kroes, Roger L.

    1999-01-01

    This paper describes the microgravity materials experiments carried out on the Shuttle/Mir program. There were six experiments, all of which investigated some aspect of diffusivity in liquid melts. The Liquid Metal Diffusion (LMD) experiment investigated the diffusivity of molten Indium samples at 185 C using a radioactive tracer, In-114m. By monitoring two different gamma ray energies (190 keV and 24 keV) emitted by the samples it was possible to measure independently the diffusion rates in the bulk and at the surface of the samples. The Queens University Experiment in Liquid Diffusion (QUELD) was the furnace facility used to process 213 samples for the five other experiments. These experiments investigated the diffusion, ripening, crystal growth, and glass formation in metal, semiconductor, and glass samples. This facility had the capability to process samples in an isothermal or gradient configuration for varying periods of time at temperatures up to 900 C. Both the LMD and the QUELD furnaces were mounted on the Microgravity Isolation Mount (MIM) which provided isolation from g-jitter. All the microgravity experiments were supported by the Space Acceleration Measurement System (SAMS); a three head three axes acceleration monitoring system which measured and recorded the acceleration environment.

  1. Material Science Experiments on Mir

    Science.gov (United States)

    Kroes, Roger L.

    1999-01-01

    This paper describes the microgravity materials experiments carried out on the Shuttle/Mir program. There were six experiments, all of which investigated some aspect of diffusivity in liquid melts. The Liquid Metal Diffusion (LMD) experiment investigated the diffusivity of molten Indium samples at 185 C using a radioactive tracer, In-114m. By monitoring two different gamma ray energies (190 keV and 24 keV) emitted by the samples it was possible to measure independently the diffusion rates in the bulk and at the surface of the samples. The Queens University Experiment in Liquid Diffusion (QUELD) was the furnace facility used to process 213 samples for the five other experiments. These experiments investigated the diffusion, ripening, crystal growth, and glass formation in metal, semiconductor, and glass samples. This facility had the capability to process samples in an isothermal or gradient configuration for varying periods of time at temperatures up to 900 C. Both the LMD and the QUELD furnaces were mounted on the Microgravity Isolation Mount (MIM) which provided isolation from g-jitter. All the microgravity experiments were supported by the Space Acceleration Measurement System (SAMS); a three head three axes acceleration monitoring system which measured and recorded the acceleration environment.

  2. 75 FR 39955 - Homeland Security Science and Technology Advisory Committee

    Science.gov (United States)

    2010-07-13

    ... SECURITY Homeland Security Science and Technology Advisory Committee AGENCY: Science and Technology.... SUMMARY: The Homeland Security Science and Technology Advisory Committee (HSSTAC) will meet July 20-21... will be partially closed to the public. DATES: The Homeland Security Science and Technology Advisory...

  3. 75 FR 2555 - Homeland Security Science and Technology Advisory Committee

    Science.gov (United States)

    2010-01-15

    ... SECURITY Homeland Security Science and Technology Advisory Committee AGENCY: Science and Technology...: The Homeland Security Science and Technology Advisory Committee will meet January 26-28, 2010, at the... public. DATES: The Homeland Security Science and Technology Advisory Committee will meet January 26, 2010...

  4. 75 FR 18516 - Homeland Security Science and Technology Advisory Committee

    Science.gov (United States)

    2010-04-12

    ... SECURITY Homeland Security Science and Technology Advisory Committee AGENCY: Science and Technology...: The Homeland Security Science and Technology Advisory Committee will meet April 20-22, 2010 at the.... This meeting will be closed to the public. DATES: The Homeland Security Science and Technology Advisory...

  5. JPRS Report, Science & Technology: Europe.

    Science.gov (United States)

    2007-11-02

    indeed the case, the Fr88 million invested in the operation—40 million of which were provided by the French government , 28 million by the ESA, and 20...million by the Midi- Pyrenees region and the department of Haute- Garonne—will have proved worthwhile. Moreover, the CNES is firmly convinced that...in Fokker 92WS0778C Paris AFP SCIENCES in French 30 Jul 92 pl5 [Text] La Haye—The Dutch government , which holds 31.8 percent of the capital of

  6. Ethiopian Journal of Science and Technology: Editorial Policies

    African Journals Online (AJOL)

    The Ethiopian Journal of Science and Technology (EJST) publishes high quality ... applied aspects of science, technology, agriculture, health and other related fields. ... Dr Endalkachew Nibret, Department of Biology, Science College, BDU.

  7. Science& Technology Review June 2003

    Energy Technology Data Exchange (ETDEWEB)

    McMahon, D

    2003-06-01

    This month's issue has the following articles: (1) Livermore's Three-Pronged Strategy for High-Performance Computing, Commentary by Dona Crawford; (2) Riding the Waves of Supercomputing Technology--Livermore's Computation Directorate is exploiting multiple technologies to ensure high-performance, cost-effective computing; (3) Chromosome 19 and Lawrence Livermore Form a Long-Lasting Bond--Lawrence Livermore biomedical scientists have played an important role in the Human Genome Project through their long-term research on chromosome 19; (4) A New Way to Measure the Mass of Stars--For the first time, scientists have determined the mass of a star in isolation from other celestial bodies; and (5) Flexibly Fueled Storage Tank Brings Hydrogen-Powered Cars Closer to Reality--Livermore's cryogenic hydrogen fuel storage tank for passenger cars of the future can accommodate three forms of hydrogen fuel separately or in combination.

  8. Nuclear Science Technology and Nano Science Technology%核技术与纳米技术

    Institute of Scientific and Technical Information of China (English)

    柴之芳

    2007-01-01

    Nuclear science and technology can play a unique role in nano-science and technology, due to its nuclear characteristics and properties. In many cases nuclear science and technology can acquire intriguing results to help solve some basic scientific problems in nano science and technology, which are often difficult or even impossible for non-nuclear routes. In this review some latest achievements made in this aspect will be selectively introduced with the emphasis on the work done in our laboratory. The work includes (1) nuclear reactions for synthesis of novel nanomaterials; (2) nuclear spectroscopy for characterization of nanomaterials; and (3) nuclear analytical techniques for study of nanosafety and nanotoxicology. Some practical examples to demonstrate the roles of nuclear science and technology will be briefly described.

  9. JPRS Report, Science & Technology Europe

    Science.gov (United States)

    2007-11-02

    Hypersonic Technology Program Outlined [Eckart Steinheil, Wolfgang Uhse; DORNIER POST, No 2, 1988] 14 Future Operational Aspects of European Space Station...autonomous place in the cosmos. But even if the supply with the space glider Hermes functions, dependency remains. For maintenance, one must look...its supply by Hermes. Every 180 days, the space glider , beginning at the end of 1999, is sup- posed to dock at the rearwardly-affixed coupling stud

  10. JPRS Report, Science & Technology, Europe.

    Science.gov (United States)

    2007-11-02

    L’USINE NOUVELLE/TECHNOLOGIES, 13 Dec 90] 19 Trends in Laser Applications Analyzed [Claude Gele ; Paris INDUSTRIES ET TECHNIQUES, 21 Dec 90] 19...Claude Gele ; Paris INDUSTRIES ET TECHNIQUES, 21 Dec 90] 21 LASERS, SENSORS, OPTICS Swiss-Developed Sensor Measures High Voltages Non...Trends in Laser Applications Analyzed 91WS0164A Paris INDUSTRIES ET TECHNIQUES in French 21 Dec 91 pp 25-26 [Article by Claude Gele : "The

  11. JPRS Report, Science & Technology, Japan.

    Science.gov (United States)

    2007-11-02

    personalization of information use and access. In the coming information society , all fields of human activities will be connected by information...of infrastructure and qualitative aspects of information technology utilization. To realize an advanced information society , it is necessary to...Software Promotion Programs A stable supply of high-quality software is essential to the realization of an advanced information society . The rapid

  12. Europe Report, Science and Technology

    Science.gov (United States)

    1986-09-30

    technologies into industry; nuclear energy; biotechnolgy; the exploitation and utilization of marine resources and, finally, "the Europe of...agriculture and in medicine. I am thinking here of bacteria, yeasts, fungi and actinomycetes . The Institute of Microbiology plays a major role in the...sphere of microbial hydrolysis. Considerable success has been achieved in isolating highly active bacterial, mold and actinomycetes strains. On the basis

  13. JPRS Report, Science & Technology, Japan

    Science.gov (United States)

    1988-08-29

    Accelerated The discovery of perovskite -based superconductivity substances by Müller of IBM Zurich Research Institute in Switzerland created the...intensity of 10 roentgens per hour. For this effort, the Institute is earmarking 69 million yen from this year’s budget. Nuclear power plants have a...development of a basic technology toward the construction of a harsh environment sensor system capable of withstanding a radiation rate of 10 roentgens

  14. JPRS Report, Science & Technology, Europe

    Science.gov (United States)

    1992-11-30

    stiffness two times greater than that of aluminum and, hence, a savings in weight. Filmix is assembled by a Foucault -current welding technology and not...for structures to be used in space flights. The scope of fabrication of the Filmix strand and the Foucault - current welding technique are both the...official, Michel Maurette, since it will not only have to observe, detect, and evaluate, but make decisions and implement them without interven

  15. Science, Technology and Requirements - Forum

    Science.gov (United States)

    2012-10-18

    military applications; the glass technology can be used to develop retroreflectors for improved marking in highways, textiles , and signs. UV...equipment, or vehicles that can be tracked from long distances. Results Laminated 12”x12” windows were tested for ballistic resistance per ASTM...glass ribbon composites (OTRC) as components of laminated armor windows • Metrics and Deliverables: 12”x12”x2.5” laminated armor window that

  16. JPRS Report, Science & Technology, Japan

    Science.gov (United States)

    2007-11-02

    Ford Aerospace of the U.S. or Aerospatiale of France. It will be equipped with two infrared-ray cameras to improve observation capabilities. The...and by scanning it with a laser beam. An X-ray fiber is not only effective as a sensor technology but expected to trigger social demand more than...omitted]. With regard to the Compton type free electron laser using high-energy small- current electron beam sources (linear accelerator, electron

  17. JPRS Report, Science & Technology: Europe.

    Science.gov (United States)

    2007-11-02

    While Aerospatiale sold 289 helicopters in 1990, last year’s level only reached 256 machines. This figure includes the MBB products, the BO 105 (34...Aerospatiale started with CATIC (China) and Singapore Aerospace, will be transferred to Ottobrunn. In addition, important future programs are the BO ...92 p 3 [Interview with Sarolta Makara, Madame Director of Csucstechnika Ltd., by B. L.] [Text] Csucstechnika [Peak Technology] is the only firm in

  18. Terahertz biomedical science and technology

    CERN Document Server

    Son, Joo-Hiuk

    2014-01-01

    Introduction to Biomedical Studies Using Terahertz WavesJoo-Hiuk SonSection I Terahertz TechnologyTerahertz Sources and DetectorsHyunyong Choi and Joo-Hiuk SonTabletop High-Power Terahertz Pulse Generation TechniquesYun-Shik LeeTerahertz Imaging and Tomography TechniquesHyunyong Choi and Joo-Hiuk SonCompact Solid-State Electronic Terahertz Devices and CircuitsJae-Sung Rieh, Daekeun Yoon, and Jongwon Yun<

  19. [Technology transfer of building materials by ECOMAT

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-01

    This report discusses the plan for technology transfer of building materials developed by ECOMAT to the commercial private sector. Some of the materials are briefly discussed like foams, fiber reinforcement, fly ash development, and polymer fillers.

  20. Science and Technology Review December 2000

    Energy Technology Data Exchange (ETDEWEB)

    de Pruneda, J.H.

    2000-12-01

    This issue contains the following articles: (1) ''Computational Know-How Advances Materials Science''. (2) ''Following Materials over Time and Space'' Large-scale simulations, performed over an enormous range of length and time scales, enable researchers to advance their understanding of material behavior. (3) ''The Art of Systems Science'' Systems scientists practice the multidisciplinary art of gathering information and constructing the systems models needed for informed decision making. (4) ''A Solution for Carbon Dioxide Overload''. (5) ''Preparing for Strong Earthquakes''.

  1. Improving NASA's technology for space science

    Science.gov (United States)

    1993-01-01

    The continued advance of the nation's space program is directly dependent upon the development and use of new technology. Technology is the foundation for every aspect of space missions and ground operations. The improvements in technology that will enable future advances are not only in device and system performance, but also in permitting missions to be carried out more rapidly and at lower cost. Although more can be done with current technology, NASA's recent call for new and innovative approaches should not be answered by employing only today's technologies; new technologies with revolutionary potential should be sought. The study reported here was performed to identify means to enhance the development of technologies for the space sciences and applications.

  2. Metallurgy, the Father of Materials Science

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The evolution of the discipline of materials science during the second half of the twentieth century is outlined. The concept emerged in the USA, almost simultaneously in an academic metallurgy department and in an avant-garde industrial research laboratory, and its development subsequently all over the world has been a joint enterprise involving universities, industrial laboratories and government establishments. The initial impetus came unambiguously from the well established discipline of physical metallurgy, but from the 1960s onwards, the input from solid-state physicists grew very rapidly, while materials chemistry is a later addition. Of all the many subdivisions of modern materials science, polymer science has been the slowest to fit under the umbrella of the broad discipline; its concepts are very different from those familiar to metallurgists. Two fields have contributed mightily to the creation of modern materials science: One is nuclear energy and, more specifically, the study of radiation damage, the other is the huge field of electronic and opto-electronic materials in which physics, chemistry and metallurgy are seamlessly combined.

  3. Hanford science and technology needs statements, 2000

    Energy Technology Data Exchange (ETDEWEB)

    BERLIN, G.T.

    1999-07-16

    In the aftermath of the Cold War, the United States has begun addressing the environmental consequences of five decades of nuclear weapons production. In November 1989, DOE established the Office of Environmental Restoration and Waste Management (EM) as the central authority for cleaning up the DOE weapons complex legacy of pollution, for preventing further environmental contamination, and for instituting responsible environmental management. While performing its tasks, EM found that many aspects of its large and complex mission could not be achieved using existing science and technology or without incurring unreasonable costs, risks, or schedule impacts. Consequently, a process was developed to solicit needs from around the DOE complex and focus the science and technology resources of EM-50, the National Laboratories, private industry, and colleges and universities on those needs. This document describes those needs that the Hanford Site has identified as requiring additional science or technology to complete.

  4. Hanford science and technology needs statements, 1999

    Energy Technology Data Exchange (ETDEWEB)

    Berlin, G.T.

    1998-09-30

    In the aftermath of the Cold War, the US has begun addressing the environmental consequences of five decades of nuclear weapons production. In November 1989, DOE established the Office of Environmental Restoration and Waste Management (EM) as the central authority for cleaning up the DOE weapons complex legacy of pollution, for preventing further environmental contamination, and for instituting responsible environmental management. While performing its tasks, EM found that many aspects of its large and complex decisions could not be achieved using existing science and technology or without incurring unreasonable costs, risks, or schedule impacts. Consequently, a process was developed to solicit needs from around the DOE complex and focus the science and technology resources of EM-50, the National Laboratories, private industry, and collages and universities on those needs. This document describes those needs which the Hanford Site has identified as requiring additional science or technology to complete.

  5. Using Technology to Facilitate Differentiated High School Science Instruction

    Science.gov (United States)

    Maeng, Jennifer L.

    2017-10-01

    This qualitative investigation explored the beliefs and practices of one secondary science teacher, Diane, who differentiated instruction and studied how technology facilitated her differentiation. Diane was selected based on the results of a previous study, in which data indicated that Diane understood how to design and implement proactively planned, flexible, engaging instructional activities in response to students' learning needs better than the other study participants. Data for the present study included 3 h of semi-structured interview responses, 37.5 h of observations of science instruction, and other artifacts such as instructional materials. This variety of data allowed for triangulation of the evidence. Data were analyzed using a constant comparative approach. Results indicated that technology played an integral role in Diane's planning and implementation of differentiated science lessons. The technology-enhanced differentiated lessons employed by Diane typically attended to students' different learning profiles or interest through modification of process or product. This study provides practical strategies for science teachers beginning to differentiate instruction, and recommendations for science teacher educators and school and district administrators. Future research should explore student outcomes, supports for effective formative assessment, and technology-enhanced readiness differentiation among secondary science teachers.

  6. Using Technology to Facilitate Differentiated High School Science Instruction

    Science.gov (United States)

    Maeng, Jennifer L.

    2016-09-01

    This qualitative investigation explored the beliefs and practices of one secondary science teacher, Diane, who differentiated instruction and studied how technology facilitated her differentiation. Diane was selected based on the results of a previous study, in which data indicated that Diane understood how to design and implement proactively planned, flexible, engaging instructional activities in response to students' learning needs better than the other study participants. Data for the present study included 3 h of semi-structured interview responses, 37.5 h of observations of science instruction, and other artifacts such as instructional materials. This variety of data allowed for triangulation of the evidence. Data were analyzed using a constant comparative approach. Results indicated that technology played an integral role in Diane's planning and implementation of differentiated science lessons. The technology-enhanced differentiated lessons employed by Diane typically attended to students' different learning profiles or interest through modification of process or product. This study provides practical strategies for science teachers beginning to differentiate instruction, and recommendations for science teacher educators and school and district administrators. Future research should explore student outcomes, supports for effective formative assessment, and technology-enhanced readiness differentiation among secondary science teachers.

  7. Nordic science and technology entrepreneurship education

    DEFF Research Database (Denmark)

    Warhuus, Jan P.; Basaiawmoit, Rajiv Vaid

    As a university discipline, entrepreneurship education (EEd) has moved from whether it can be taught, to what and how it should be taught (Kuratko 2005) and beyond the walls of the business school (Hindle 2007), where a need for a tailored, disciplinary approach is becoming apparent. Within science......, findings, and knowledge. The objective of this paper is to decode this tacit knowledge within Nordic science and technology institutions, and use it to provide guidance for future EEd program designs and improvements....

  8. Materials science for solar energy conversion systems

    CERN Document Server

    Granqvist, CG

    1991-01-01

    Rapid advances in materials technology are creating many novel forms of coatings for energy efficient applications in solar energy. Insulating heat mirrors, selective absorbers, transparent insulation and fluorescent concentrators are already available commercially. Radiative cooling, electrochromic windows and polymeric light pipes hold promise for future development, while chemical and photochemical processes are being considered for energy storage. This book investigates new material advances as well as applications, costs, reliability and industrial production of existing materials. Each c

  9. Steels from materials science to structural engineering

    CERN Document Server

    Sha, Wei

    2013-01-01

    Steels and computer-based modelling are fast growing fields in materials science as well as structural engineering, demonstrated by the large amount of recent literature. Steels: From Materials Science to Structural Engineering combines steels research and model development, including the application of modelling techniques in steels.  The latest research includes structural engineering modelling, and novel, prototype alloy steels such as heat-resistant steel, nitride-strengthened ferritic/martensitic steel and low nickel maraging steel.  Researchers studying steels will find the topics vital to their work.  Materials experts will be able to learn about steels used in structural engineering as well as modelling and apply this increasingly important technique in their steel materials research and development. 

  10. Science & Technology Review June 2009

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2009-06-05

    This month's issue has the following articles: (1) A Safer and Even More Effective TATB - Commentary by Bruce T. Goodwin; (2) Dissolving Molecules to Improve Their Performance - Computer scientists and chemists have teamed to develop a green method for recycling a valuable high explosive that is no longer manufactured; (3) Exceptional People Producing Great Science - Postdoctoral researchers lend their expertise to projects that support the Laboratory's missions; (4) Revealing the Identities and Functions of Microbes - A new imaging technique illuminates bacterial metabolic pathways and complex relationships; and (5) A Laser Look inside Planets - Laser-driven ramp compression may one day reveal the interior structure of Earth-like planets in other solar systems.

  11. Science & Technology Review November 2006

    Energy Technology Data Exchange (ETDEWEB)

    Radousky, H

    2006-09-29

    This months issue has the following articles: (1) Expanded Supercomputing Maximizes Scientific Discovery--Commentary by Dona Crawford; (2) Thunder's Power Delivers Breakthrough Science--Livermore's Thunder supercomputer allows researchers to model systems at scales never before possible. (3) Extracting Key Content from Images--A new system called the Image Content Engine is helping analysts find significant but hard-to-recognize details in overhead images. (4) Got Oxygen?--Oxygen, especially oxygen metabolism, was key to evolution, and a Livermore project helps find out why. (5) A Shocking New Form of Laserlike Light--According to research at Livermore, smashing a crystal with a shock wave can result in coherent light.

  12. Science & Technology Review September 2002

    Energy Technology Data Exchange (ETDEWEB)

    Budil, K

    2002-09-01

    This month's issue has the following articles: (1) Livermore--Poised for the Future, Commentary by Michael R. Anastasio; (2) A Hitchhiker's Guide to Early Earth--Experiments examine the possibility that the building blocks of life arrived on Earth as hitchhikers on comets; (3) A New World of Maps--More than pretty pictures, maps prepared with the tools of geographic information sciences allow researchers to find new relationships among spatial information; (4) Solid-Oxide Fuel Cells Stack Up to Efficient, Clean Power--The goal of Livermore's research in solid-oxide fuel cells is electric power generated cleanly and efficiently at an affordable cost; and (5) Empowering Light, Historic Accomplishments in Laser Research--During the past 40 plus years, the laser program at Livermore has played a seminal role in taking high-energy lasers from concept to reality.

  13. Science & Technology Review March 2009

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2009-01-22

    This month's issue has the following articles: (1) Seismic Science and Nonproliferation--Commentary by William H. Goldstein; (2) Sleuthing Seismic Signals--Supercomputer simulations improve the accuracy of models used to distinguish nuclear explosions from earthquakes and pinpoint their location; (3) Wind and the Grid--The Laboratory lends technical expertise to government and industry to more effectively integrate wind energy into the nation's electrical infrastructure; (4) Searching for Tiny Signals from Dark Matter--Powerful amplifiers may for the first time allow researchers to detect axions, hypothesized particles that may constitute 'dark matter', and (5) A Better Method for Self-Decontamination--A prototype decontamination system could one day allow military personnel and civilians to better treat themselves for exposure to toxic chemicals.

  14. Science & Technology Review April 2007

    Energy Technology Data Exchange (ETDEWEB)

    Radousky, H B

    2007-02-27

    This month's issue has the following articles: (1) Shaking the Foundations of Solar-System Science--Commentary by William H. Goldstein; (2) Stardust Results Challenge Astronomical Convention--The first samples retrieved from a comet are a treasure trove of surprises to Laboratory researchers; (3) Fire in the Hole--Underground coal gasification may help to meet future energy supply challenges with a production process from the past; (4) Big Physics in Small Spaces--A newly developed computer model successfully simulates particle-laden fluids flowing through complex microfluidic systems; (5) A New Block on the Periodic Table--Livermore and Russian scientists add a new block to the periodic table with the creation of element 118; and (6) A Search for Patterns and Connections--Throughout his career, Edward Teller searched for mathematical solutions to explain the physical world.

  15. Materials Technology; 200 Years and the Future.

    Science.gov (United States)

    Yadon, James N.; Steeb, Ralph V.

    Focus in this paper is on the importance of materials technology, the matter and energy crises, and the interrelatedness of our increasing need for materials, and the implications for education. Following a short history of what materials have done for man and what man has done with materials, particularly in the development of various metals and…

  16. 77 FR 5282 - National Science and Technology Council

    Science.gov (United States)

    2012-02-02

    ... From the Federal Register Online via the Government Publishing Office ] OFFICE OF SCIENCE AND TECHNOLOGY POLICY National Science and Technology Council ACTION: Notice of Public Meeting. SUMMARY: The... Technology (NSET) Subcommittee of the Committee on Technology, National Science and Technology Council...

  17. JPRS Report, Science & Technology, Japan

    Science.gov (United States)

    2007-11-02

    Cosmetics, and Medical Instruments Act." To be exact, the artificial joint in question is an artificial knee joint called " Bioceram ," which has been sold...machinery, automobile parts, and electronic parts of the Ceramics Department and bioceram (medical material), solar energy, electronic equipment... Bioceramics --including artificial teeth and artificial bones--in which Kyocera was taking a great lead has recently hit an impasse due to the

  18. JPRS Report, Science & Technology: Europe

    Science.gov (United States)

    2007-11-02

    liquid. Patfoort (shows a sadly misshapen Mipstone): This is pliable stone. We have tried to destroy it with all sorts of rough means. But it doesn’t...included in a pilot project at the Brasov Petrochemical Combine, uses wood chips and shavings as raw material, transforming them by means of...medals were • the Robotron M 4202 partial discharge probe for detecting fault locations in high-voltage insulators , • the Robotron K 6416 compact

  19. JPRS Report. Science & Technology: Japan

    Science.gov (United States)

    2007-11-02

    for NBR, CR, and EPDM which have been in use, the adoption of fluoric rubber, acrylic rubber, and hydrin rubber attracts attention. Adhesives have...Although Si3Ni,. is the main component, other materials such as SiC, PSZ (partial stabilization zirconia), and A1203 are currently under investi- gation...application is greatly expected to be achieved by conquering several subjects such as mate- rial development, stability of quality, and establishment of

  20. Japan Report, Science and Technology

    Science.gov (United States)

    1987-05-26

    manufacture of the chemical. Among other examples of similar reactions are the synthesis of cumene hydroperoxide, the raw material of phenol, which...involves irradiation of cumene with XeCl-laser under an oxygen atmosphere, leading to the cleavage of a C-H bond and a chain reaction with a quantum...responsive to detectors are converted by enzymic reactions , and are highly responsive. Moreover, the specificity of enzymes amplifies the signals

  1. Separation science and technology: an ORNL perspective

    Energy Technology Data Exchange (ETDEWEB)

    Pruett, D.J.

    1986-05-01

    This report was prepared as a summary of a fourfold effort: (1) to examine schemes for defining and categorizing the field of separation science and technology; (2) to review several of the major categories of separation techniques in order to determine the most recent developments and future research needs; (3) to consider selected problems and programs that require advances in separation science and technology as a part of their solution; and (4) to propose suggestions for new directions in separation research at Oak Ridge National Laboratory (ORNL).

  2. Incorporating digital technologies into science classes

    DEFF Research Database (Denmark)

    Hilton, Annette; Hilton, Geoff

    2013-01-01

    learning. There is a need for research that examines the ways in which digital technologies impact on teaching practices and learning outcomes. This paper describes case studies from two larger studies that examined ways in which digital technologies could be used to promote students’ understanding...... in science. The first case study involved primary school students (12 years old) using digital video production to record and represent their learning in science. This study extended writing-to-learn approaches to include video production to learn. The second case study involved Year 11 chemistry students...

  3. Advances in nuclear science and technology

    CERN Document Server

    Henley, Ernest J

    1972-01-01

    Advances in Nuclear Science and Technology, Volume 6 provides information pertinent to the fundamental aspects of nuclear science and technology. This book covers a variety of topics, including nuclear steam generator, oscillations, fast reactor fuel, gas centrifuge, thermal transport system, and fuel cycle.Organized into six chapters, this volume begins with an overview of the high standards of technical safety for Europe's first nuclear-propelled merchant ship. This text then examines the state of knowledge concerning qualitative results on the behavior of the solutions of the nonlinear poin

  4. Mathematics for engineering, technology and computing science

    CERN Document Server

    Martin, Hedley G

    1970-01-01

    Mathematics for Engineering, Technology and Computing Science is a text on mathematics for courses in engineering, technology, and computing science. It covers linear algebra, ordinary differential equations, and vector analysis, together with line and multiple integrals. This book consists of eight chapters and begins with a discussion on determinants and linear equations, with emphasis on how the value of a determinant is defined and how it may be obtained. Solution of linear equations and the dependence between linear equations are also considered. The next chapter introduces the reader to

  5. Japan society for software science and technology

    CERN Document Server

    Nakajima, Reiji; Hagino, Tatsuya

    1990-01-01

    Advances in Software Science and Technology, Volume 1 provides information pertinent to the advancement of the science and technology of computer software. This book discusses the various applications for computer systems.Organized into three parts encompassing 13 chapters, this volume begins with an overview of the phase structure grammar for Japanese called JPSG, and a parser based on this grammar. This text then explores the logic-based knowledge representation called Uranus, which uses a multiple world mechanism. Other chapters consider the optimal file segmentation techniques for multi-at

  6. Separation science and technology: an ORNL perspective

    Energy Technology Data Exchange (ETDEWEB)

    Pruett, D.J.

    1986-05-01

    This report was prepared as a summary of a fourfold effort: (1) to examine schemes for defining and categorizing the field of separation science and technology; (2) to review several of the major categories of separation techniques in order to determine the most recent developments and future research needs; (3) to consider selected problems and programs that require advances in separation science and technology as a part of their solution; and (4) to propose suggestions for new directions in separation research at Oak Ridge National Laboratory (ORNL).

  7. Advances in software science and technology

    CERN Document Server

    Kakuda, Hiroyasu; Ohno, Yoshio

    1992-01-01

    Advances in Software Science and Technology, Volume 3 provides information pertinent to the advancement of the science and technology of computer software. This book discusses the various applications for computer systems.Organized into two parts encompassing 11 chapters, this volume begins with an overview of the development of a system of writing tools called SUIKOU that analyzes a machine-readable Japanese document textually. This text then presents the conditioned attribute grammars (CAGs) and a system for evaluating them that can be applied to natural-language processing. Other chapters c

  8. Advances in nuclear science and technology

    CERN Document Server

    Henley, Ernest J

    1976-01-01

    Advances in Nuclear Science and Technology, Volume 9 provides information pertinent to the fundamental aspects of nuclear science and technology. This book discusses the safe and beneficial development of land-based nuclear power plants.Organized into five chapters, this volume begins with an overview of the possible consequences of a large-scale release of radioactivity from a nuclear reactor in the event of a serious accident. This text then discusses the extension of conventional perturbation techniques to multidimensional systems and to high-order approximations of the Boltzmann equation.

  9. Advances in nuclear science and technology

    CERN Document Server

    Henley, Ernest J

    1973-01-01

    Advances in Nuclear Science and Technology, Volume 7 provides information pertinent to the fundamental aspects of nuclear science and technology. This book discusses the safe and beneficial development of land-based nuclear power plants.Organized into five chapters, this volume begins with an overview of irradiation-induced void swelling in austenitic stainless steels. This text then examines the importance of various transport processes for fission product redistribution, which depends on the diffusion data, the vaporization properties, and the solubility in the fuel matrix. Other chapters co

  10. Advances in software science and technology

    CERN Document Server

    Hikita, Teruo; Kakuda, Hiroyasu

    1993-01-01

    Advances in Software Science and Technology, Volume 4 provides information pertinent to the advancement of the science and technology of computer software. This book discusses the various applications for computer systems.Organized into two parts encompassing 10 chapters, this volume begins with an overview of the historical survey of programming languages for vector/parallel computers in Japan and describes compiling methods for supercomputers in Japan. This text then explains the model of a Japanese software factory, which is presented by the logical configuration that has been satisfied by

  11. Science, technology, autonomy, and dependence: a framework for international debate

    Energy Technology Data Exchange (ETDEWEB)

    Morehouse, W.

    1979-01-01

    The role of science and technology in the international system has changed markedly in the past 30 years. Science and technology have emerged as primary instruments of power and social control, with the major industrialized countries, especially the superpowers, relying more and more on science and technology as a means of maintaining their dominance in that system. The technological gap between the North and the South has widened during this period. Development strategies, relying on importation of capital-intensive, socially inappropriate, environmentally destructive Western technologies will lead to a massive global equity crisis in the 1980s. These technologies have been at the heart of the accelerating de-industrialization of the Third World by the First and Second Worlds on a scale far beyond what occurred in historical colonialism. The critical need is to focus the debate at the forthcoming world conferences on these underlying issues, leading to the formulation of concrete action proposals at the national and international levels which will effectively promote the technological autonomy of the Third World. While we cannot be certain that greater autonomy will lad to greater equity, few Southern countries can go very far in meeting the minimum material needs of most, not to speak all, of their people without a greatly strengthened autonomous capacity for creating, acquiring, adapting, and using technology to solve their own urgent economic and social problems.

  12. Hanford science and technology needs statements document

    Energy Technology Data Exchange (ETDEWEB)

    Piper, L.L.

    1997-12-31

    This document is a compilation of the Hanford science and technology needs statements for FY 1998. The needs were developed by the Hanford Site Technology Coordination Group (STCG) with full participation and endorsement of site user organizations, stakeholders, and regulators. The purpose of this document is to: (a) provide a comprehensive listing of Hanford science and technology needs, and (b) identify partnering and commercialization opportunities with industry, other federal and state agencies, and the academic community. The Hanford STCG reviews and updates the needs annually. Once completed, the needs are communicated to DOE for use in the development and prioritization of their science and technology programs, including the Focus Areas, Cross-Cutting Programs, and the Environmental Management Science Program. The needs are also transmitted to DOE through the Accelerating Cleanup: 2006 Plan. The public may access the need statements on the Internet on: the Hanford Home Page (www.hanford.gov), the Pacific Rim Enterprise Center`s web site (www2.pacific-rim.org/pacific rim), or the STCG web site at DOE headquarters (em-52.em.doegov/ifd/stcg/stcg.htm). This page includes links to science and technology needs for many DOE sites. Private industry is encouraged to review the need statements and contact the Hanford STCG if they can provide technologies that meet these needs. On-site points of contact are included at the ends of each need statement. The Pacific Rim Enterprise Center (206-224-9934) can also provide assistance to businesses interested in marketing technologies to the DOE.

  13. Materials and Components Technology Division research summary, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-11-01

    The Materials and Components Technology Division (MCT) provides a research and development capability for the design, fabrication, and testing of high-reliability materials, components, and instrumentation. Current divisional programs related to nuclear energy support the development of the Integral Fast Reactor (IFR): life extension and accident analyses for light water reactors (LWRs); fuels development for research and test reactors; fusion reactor first-wall and blanket technology; and safe shipment of hazardous materials. MCT Conservation and Renewables programs include major efforts in high-temperature superconductivity, tribology, nondestructive evaluation (NDE), and thermal sciences. Fossil Energy Programs in MCT include materials development, NDE technology, and Instrumentation design. The division also has a complementary instrumentation effort in support of Arms Control Technology. Individual abstracts have been prepared for the database.

  14. Educating Americans for the 21st Century: A Plan of Action for Improving Mathematics, Science and Technology Education for All American Elementary and Secondary Students So That Their Achievement Is the Best in the World by 1995. Source Materials.

    Science.gov (United States)

    National Science Foundation, Washington, DC. National Science Board Commission on Precollege Education in Mathematics, Science and Technology.

    This volume is composed of 11 source documents which report activities sponsored by the National Science Board Commission on Precollege Education in Mathematics, Science and Technology, deliberations of a subgroup of the National Science Foundation Engineering Advisory Committee, and a paper prepared for the Pfizer Corporation. The first four…

  15. Materials and Chemical Sciences Division annual report, 1987

    Energy Technology Data Exchange (ETDEWEB)

    1988-07-01

    Research programs from Lawrence Berkeley Laboratory in materials science, chemical science, nuclear science, fossil energy, energy storage, health and environmental sciences, program development funds, and work for others is briefly described. (CBS)

  16. Science& Technology Review March 2004

    Energy Technology Data Exchange (ETDEWEB)

    McMahon, D H

    2004-01-23

    This month's issue has the following articles: (1) ''Rethinking Atoms for Peace and the Future of Nuclear Technology'' a commentary by Ronald F. Lehman II; (2) ''Rich Legacy from Atoms for Peace'' In 1953, President Eisenhower encouraged world leaders to pursue peaceful uses of nuclear technology. Many of Livermore's contributions in the spirit of this initiative continue to benefit society today. (3) ''Tropopause Height Becomes Another Climate-Change Fingerprint'' Simulations and observational data show that human activities are largely responsible for the steady elevation of the tropopause, the boundary between the troposphere and the stratosphere. (4) ''A Better Method for Certifying the Nuclear Stockpile'' Livermore and Los Alamos are developing a common framework for evaluating the reliability and safety of nuclear weapons. (5) ''Observing How Proteins Loop the Loop'' A new experimental method developed at Livermore allows scientists to monitor the folding processes of proteins, one molecule at a time.

  17. Dismantling boundaries in science and technology studies.

    Science.gov (United States)

    Dear, Peter; Jasanoff, Sheila

    2010-12-01

    The boundaries between the history of science and science and technology studies (STS) can be misleadingly drawn, to the detriment of both fields. This essay stresses their commonalities and potential for valuable synergy. The evolution of the two fields has been characterized by lively interchange and boundary crossing, with leading scholars functioning easily on both sides of the past/present divide. Disciplines, it is argued, are best regarded as training grounds for asking particular kinds of questions, using particular clusters of methods. Viewed in this way, history of science and STS are notable for their shared approaches to disciplining. The essay concludes with a concrete example--regulatory science--showing how a topic such as this can be productively studied with methods that contradict any alleged disciplinary divide between historical and contemporary studies of science.

  18. Materials Sciences programs, Fiscal year 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-02-01

    This report provides a compilation and index of the DOE Materials Sciences Division programs; the compilation is to assist administrators, managers, and scientists to help coordinate research. The report is divided into 7 sections: laboratory projects, contract research projects, small business innovation research, major user facilities, other user facilities, funding level distributions, and indexes.

  19. Pulsed Neutron Powder Diffraction for Materials Science

    Science.gov (United States)

    Kamiyama, T.

    2008-03-01

    advanced science and technologies. It is for the first time in neutron facilities in Japan that a prefecture owns neutron instruments as well as neutron beam will be provided widely to industrial users. To make it successful, the user system is quite important because those users are expected to use IPD like chemical analyzers in their materials development process. Based on questionnaire data to several hundreds industries, IPD is designed as a versatile diffractometer including texture measurement, small angle scattering and total scattering as well as usual powder diffraction. IPD covers d range 0.15materials with the highest resolution of Δd/d = 0.2% (corresponding to 10˜5 to 10˜6 strain precision). The typical gauge volume will be 1 mm3. JED has transmission radiography detectors to support stress mapping. Software group is planning so that basic

  20. Science & Technology Review March 2010

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2010-01-29

    This month's issue has the following articles: (1) Countering the Growing Chem-Bio Threat -- Commentary by Penrose (Parney) C. Albright; (2) Responding to a Terrorist Attack Involving Chemical Warfare Agents -- Livermore scientists are helping the nation strengthen plans to swiftly respond to an incident involving chemical warfare agents; (3) Revealing the Secrets of a Deadly Disease -- A Livermore-developed system helps scientists better understand how plague bacteria infect healthy host cells; (4) A New Application for a Weapons Code -- Simulations reveal for the first time how blast waves cause traumatic brain injuries; (5) Testing Valuable National Assets for X-Ray Damage -- Experiments at the National Ignition Facility are measuring the effects of radiation on critical systems; and (6) An Efficient Way to Harness the Sun's Power -- New solar thermal technology is designed to supply residential electric power at nearly half of the current retail price.

  1. Science & Technology Review March 2007

    Energy Technology Data Exchange (ETDEWEB)

    Radousky, H B

    2007-02-05

    This month's issue has the following articles: (1) Partnering to Enhance Americans Health--Commentary by Tomas Diaz de la Rubia; (2) Advancing the Frontiers in Cancer Research--Researchers at the University of California Davis Cancer Center and Lawrence Livermore are teaming up to fight cancer; (3) On the Leading Edge of Atmospheric Predictions--Continual research and development at the National Atmospheric Release Advisory Center help mitigate the consequences of toxic airborne hazards; (4) Climate and Agriculture: Change Begets Change--A Livermore researcher is using computer models to explore how a warmer climate may affect crop yields in California; (5) New Routes to High Temperatures and Pressures--With functionally graded density impactors composed of thin metal and polyethylene films, researchers can explore new areas of experimental physics; and (6) From Sound Waves to Stars: Teller's Contributions to Shock Physics--Edward Teller's interest in shock physics led to significant developments in both basic and applied science.

  2. Technology thrusts for future Earth science applications

    Science.gov (United States)

    Habib, Shahid

    2001-02-01

    This paper presents NASA's recent direction to invest in the critical science instrument and platform technologies in order to realize more reliable, frequent and versatile missions for future Earth Science measurements. Historically, NASA's Earth Science Enterprise has developed and flown science missions that have been large in size, mass and volume. These missions have taken much longer to implement due to technology development time, and have carried a large suite of instruments on a large spacecraft. NASA is now facing an era where the budget for the future years is more or less flat and the possibility for any major new start does not vividly appear on the horizon. Unfortunately, the scientific measurement needs for remote sensing have not shrunk to commensurate with the budget constraints. In fact, the challenges and scientific appetite in search of answers to a score of outstanding questions have been gradually expanding. With these factors in mind, for the last three years NASA has been changing its focus to concentrate on how to take advantage of smaller missions by relying on industry, and minimizing the overall mission life cycle by developing technologies that are independent of the mission implementation cycle. The major redirection of early investment in the critical technologies should eventually have its rewards and significantly reduce the mission development period. Needless to say, in the long run this approach should save money, minimize risk, promote or encourage partnering, allow for a rapid response to measurement needs, and enable frequent missions making a wider variety of earth science measurements. This paper gives an overview of some of the identified crucial technologies and their intended applications for meeting the future Earth Science challenges.

  3. Silicates materials of high vacuum technology

    CERN Document Server

    Espe, Werner

    2013-01-01

    Materials of High Vacuum Technology, Volume 2: Silicates covers silicate insulators of special importance to vacuum technology. The book discusses the manufacture, composition, and physical and chemical properties of technical glasses, quartz glass, quartzware, vycor glass, ceramic materials, mica, and asbestos.

  4. Science & Technology Review November 2005

    Energy Technology Data Exchange (ETDEWEB)

    Aufderheide, M B

    2005-09-19

    This month's issue has the following articles: (1) A Major Advance in Understanding Metals--Commentary by Tomas Diaz de la Rubia; (2) Materials Scientists Discover the Power of ParaDiS--A new supercomputer code is revealing how metals become stronger through the formation of dislocation line junctions; (3) A Wide New Window on the Universe--Livermore scientists and engineers are contributing to the Large Synoptic Survey Telescope, which will provide unprecedented digital maps of the changing night sky; (4) Built for Speed: Graphics Processors for General-Purpose Computing--Commercial graphics processors used in the computer gaming industry are providing low-cost solutions for high-performance data processing; and (5) Negative Plasma Densities Raise Questions--Livermore physicists shed light on anomalous results in x-ray interferometry of plasmas.

  5. Science & Technology Review November 2007

    Energy Technology Data Exchange (ETDEWEB)

    Chinn, D J

    2007-10-16

    This month's issue has the following articles: (1) Simulating the Electromagnetic World--Commentary by Steven R. Patterson; (2) A Code to Model Electromagnetic Phenomena--EMSolve, a Livermore supercomputer code that simulates electromagnetic fields, is helping advance a wide range of research efforts; (3) Characterizing Virulent Pathogens--Livermore researchers are developing multiplexed assays for rapid detection of pathogens; (4) Imaging at the Atomic Level--A powerful new electron microscope at the Laboratory is resolving materials at the atomic level for the first time; (5) Scientists without Borders--Livermore scientists lend their expertise on peaceful nuclear applications to their counterparts in other countries; and (6) Probing Deep into the Nucleus--Edward Teller's contributions to the fast-growing fields of nuclear and particle physics were part of a physics golden age.

  6. 75 FR 9007 - National Science and Technology Council, Committee on Technology Capstone Workshop Risk...

    Science.gov (United States)

    2010-02-26

    ... TECHNOLOGY POLICY National Science and Technology Council, Committee on Technology Capstone Workshop Risk Management Methods & Ethical, Legal, and Societal Implications of Nanotechnology: Public Meeting ACTION... the Nanoscale Science, Engineering, and Technology (NSET) Subcommittee of the Committee on...

  7. Materials, Chemistry, and Simulation for Future Energy Technology.

    Science.gov (United States)

    Aguey-Zinsou, Kondo-Francois; Wang, Da-Wei; Su, Dang-Sheng

    2015-09-01

    Special Issue: The Future of Energy. The science and engineering of clean energy now is becoming a multidisciplinary area, typically when new materials, chemistry, or mechanisms are met. "Trial and error" is the past. Exploration of new concepts for future clean energy can be accomplished through computer-aided materials design and reaction simulation, thanks to innovations in information technologies. This special issue, a fruit of the Energy Future Conference organized by UNSW Australia, has compiled some excellent examples of such approaches.

  8. Science & Technology Review June 2012

    Energy Technology Data Exchange (ETDEWEB)

    Poyneer, L A

    2012-04-20

    This month's issue has the following articles: (1) A New Era in Climate System Analysis - Commentary by William H. Goldstein; (2) Seeking Clues to Climate Change - By comparing past climate records with results from computer simulations, Livermore scientists can better understand why Earth's climate has changed and how it might change in the future; (3) Finding and Fixing a Supercomputer's Faults - Livermore experts have developed innovative methods to detect hardware faults in supercomputers and help applications recover from errors that do occur; (4) Targeting Ignition - Enhancements to the cryogenic targets for National Ignition Facility experiments are furthering work to achieve fusion ignition with energy gain; (5) Neural Implants Come of Age - A new generation of fully implantable, biocompatible neural prosthetics offers hope to patients with neurological impairment; and (6) Incubator Busy Growing Energy Technologies - Six collaborations with industrial partners are using the Laboratory's high-performance computing resources to find solutions to urgent energy-related problems.

  9. Public Law 96-479--National Materials and Minerals Policy, R & D Act of 1980 and Consideration of H.R. 4281 - Critical Materials Act of 1981. Hearings Before the Subcommittee on Transportation, Aviation and Materials and the Subcommittee on Science, Research and Technology of the Committee on Science and Technology U. S. House of Representatives, Ninety-Seventh Congress, Second Session. [No. 117

    Science.gov (United States)

    Congress of the U.S., Washington, DC. House Committee on Science and Technology.

    Presented in this document are transcripts of hearings on the subject of national materials policy. The hearings focused on implementation of P.L. 96-479, the National Materials and Minerals Policy, Research and Development Act of 1980 (including the recent Presidential program plan and report made to Congress) and on H.R. 4281, the Critical…

  10. Planetary Science Technology Infusion Study: Findings and Recommendations Status

    Science.gov (United States)

    Anderson, David J.; Sandifer, Carl E., II; Sarver-Verhey, Timothy R.; Vento, Daniel M.; Zakrajsek, June F.

    2014-01-01

    The Planetary Science Division (PSD) within the National Aeronautics and Space Administrations (NASA) Science Mission Directorate (SMD) at NASA Headquarters sought to understand how to better realize a scientific return on spacecraft system technology investments currently being funded. In order to achieve this objective, a team at NASA Glenn Research Center was tasked with surveying the science and mission communities to collect their insight on technology infusion and additionally sought inputs from industry, universities, and other organizations involved with proposing for future PSD missions. This survey was undertaken by issuing a Request for Information (RFI) activity that requested input from the proposing community on present technology infusion efforts. The Technology Infusion Study was initiated in March 2013 with the release of the RFI request. The evaluation team compiled and assessed this input in order to provide PSD with recommendations on how to effectively infuse new spacecraft systems technologies that it develops into future competed missions enabling increased scientific discoveries, lower mission cost, or both. This team is comprised of personnel from the Radioisotope Power Systems (RPS) Program and the In-Space Propulsion Technology (ISPT) Program staff.The RFI survey covered two aspects of technology infusion: 1) General Insight, including: their assessment of barriers to technology infusion as related to infusion approach; technology readiness; information and documentation products; communication; integration considerations; interaction with technology development areas; cost-capped mission areas; risk considerations; system level impacts and implementation; and mission pull. 2) Specific technologies from the most recent PSD Announcements of Opportunities (AOs): The Advanced Stirling Radioisotope Generator (ASRG), aerocapture and aeroshell hardware technologies, the NASA Evolutionary Xenon Thruster (NEXT) ion propulsion system, and the

  11. Primary teachers' attitudes towards science and technology

    NARCIS (Netherlands)

    Asma, L.J.F.; Walma van der Molen, J.H.; Aalderen-Smeets, S. van

    2011-01-01

    The study on primary teachers' attitudes towards science and technology has received considerable research attention over the last decades. However, if one looks at the extant literature in this domain, a major problem that becomes apparent is the lack of consistency in the conceptualization of what

  12. Support for School Science and Technology.

    Science.gov (United States)

    Schools Council, London (England).

    This Schools Council Working Paper contains the report of a working party established to review the "form, function and finance for all school science, mathematics and technology centres in the United Kingdom and to make suggestions for a possible national framework." A description of the types of existing centers used by science…

  13. Public's Knowledge of Science and Technology

    Science.gov (United States)

    Pew Research Center, 2013

    2013-01-01

    The public's knowledge of science and technology varies widely across a range of questions on current topics and basic scientific concepts, according to a new quiz by the Pew Research Center and "Smithsonian" magazine. About eight-in-ten Americans (83%) identify ultraviolet as the type of radiation that sunscreen protects against. Nearly…

  14. Science and Technology for Bioterrorism Defense

    Energy Technology Data Exchange (ETDEWEB)

    Fitch, J P

    2004-05-04

    The Lawrence Livermore National Laboratory (LLNL) Chemical & Biological National Security Program (CBNP) provides science, technology, and integrated systems for chemical and biological security. Our approach is to develop and field systems that dramatically improve the nation's capabilities to prevent, prepare for, detect, and respond to terrorist use of chemical or biological weapons.

  15. Science and Technology Policymaking: A Primer

    Science.gov (United States)

    2009-05-27

    mechanisms to combat anthrax in sheep and cattle, cholera in chickens, spoilage in milk , wine and vinegar, and rabies in people.) • Phenomena...decisions. Generally these issues fall into the category of science for policy and technology for policy. Examples include how to improve nutrition

  16. Food Science & Technology. Instructor Guide. Student Reference.

    Science.gov (United States)

    Martin, Phillip

    This packet contains an instructor curriculum guide and a student reference book for a course in food science and technology. The 4-unit curriculum contains 23 lessons. The instructor's guide contains the following components of a unit of instruction: objectives, competencies, motivational techniques, teaching procedures, other activities,…

  17. Computer science research and technology volume 3

    CERN Document Server

    Bauer, Janice P

    2011-01-01

    This book presents leading-edge research from across the globe in the field of computer science research, technology and applications. Each contribution has been carefully selected for inclusion based on the significance of the research to this fast-moving and diverse field. Some topics included are: network topology; agile programming; virtualization; and reconfigurable computing.

  18. Zimbabwe Journal of Technological Sciences: Submissions

    African Journals Online (AJOL)

    ... and well-written articles on theory and practice in Technological Sciences. ... Page 2: Write the manuscript title again without names, to facilitate blind reviewing. ... This is where the utility value, contribution or value addition of the study can ...

  19. STEM: Science Technology Engineering Mathematics. Executive Summary

    Science.gov (United States)

    Carnevale, Anthony P.; Smith, Nicole; Melton, Michelle

    2011-01-01

    Science, Technology, Engineering, and Mathematics (STEM) occupations are critical to the nation's continued economic competitiveness because of their direct ties to innovation, economic growth, and productivity, even though they will only be 5 percent of all jobs in the U.S. economy by 2018. The disproportionate influence of STEM raises a…

  20. Secondary School Science and Technology in Mauritius.

    Science.gov (United States)

    Hunma, Vandana

    2002-01-01

    Traces the history of secondary school science in Mauritius to identify factors that may have influenced its link to technology of local significance. Reports that while there are many educational and vocational opportunities, the education system is founded on literary lines with examinations. Subsequent selection at different levels has become…

  1. Computational Materials Science and Chemistry: Accelerating Discovery and Innovation through Simulation-Based Engineering and Science

    Energy Technology Data Exchange (ETDEWEB)

    Crabtree, George [Argonne National Lab. (ANL), Argonne, IL (United States); Glotzer, Sharon [University of Michigan; McCurdy, Bill [University of California Davis; Roberto, Jim [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2010-07-26

    This report is based on a SC Workshop on Computational Materials Science and Chemistry for Innovation on July 26-27, 2010, to assess the potential of state-of-the-art computer simulations to accelerate understanding and discovery in materials science and chemistry, with a focus on potential impacts in energy technologies and innovation. The urgent demand for new energy technologies has greatly exceeded the capabilities of today's materials and chemical processes. To convert sunlight to fuel, efficiently store energy, or enable a new generation of energy production and utilization technologies requires the development of new materials and processes of unprecedented functionality and performance. New materials and processes are critical pacing elements for progress in advanced energy systems and virtually all industrial technologies. Over the past two decades, the United States has developed and deployed the world's most powerful collection of tools for the synthesis, processing, characterization, and simulation and modeling of materials and chemical systems at the nanoscale, dimensions of a few atoms to a few hundred atoms across. These tools, which include world-leading x-ray and neutron sources, nanoscale science facilities, and high-performance computers, provide an unprecedented view of the atomic-scale structure and dynamics of materials and the molecular-scale basis of chemical processes. For the first time in history, we are able to synthesize, characterize, and model materials and chemical behavior at the length scale where this behavior is controlled. This ability is transformational for the discovery process and, as a result, confers a significant competitive advantage. Perhaps the most spectacular increase in capability has been demonstrated in high performance computing. Over the past decade, computational power has increased by a factor of a million due to advances in hardware and software. This rate of improvement, which shows no sign of

  2. Introduction to cognition in science and technology.

    Science.gov (United States)

    Gorman, Michael E

    2009-10-01

    Cognitive studies of science and technology have had a long history of largely independent research projects that have appeared in multiple outlets, but rarely together. The emergence of a new International Society for Psychology of Science and Technology suggests that this is a good time to put some of the latest work in this area into topiCS in a way that will both acquaint readers with the cutting edge in this domain and also give them a hint of its history. One core theme includes how scientists, inventors, and engineers represent and solve problems; another, related theme is the extent to which they distribute and share cognition. Methodologies include fine-grained studies of historical records, protocols of working scientists, observations and comparisons of engineering science laboratories, and computational simulations designed both to serve as research tools and also to improve scientific problem-solving. The series of articles will conclude with the Associate Editor's suggestions for future research.

  3. Measurement Science and Technology at 2013

    Science.gov (United States)

    Birch, David J. S.

    2013-01-01

    Dear authors, reviewers and readers of Measurement Science and Technology, As a New Year dawns I would like to thank all those who have published papers with us in 2012, and offer a special thanks go to those of you who have given up much of your precious time and kindly reviewed articles for the journal. I would also like to take this opportunity to update you all on some of the developments on the journal as we look ahead to a 2013 that will be a very special year for MST. Something that many readers may not be aware of is that Measurement Science and Technology was the world's first scientific instrument journal, and in 2013 we will be celebrating 90 years since the journal was first published. In 1923 the Institute of Physics launched the Journal of Scientific Instruments in order to capture the essential information regarding the design and performance of instruments, which was then often unobtainable from books or articles focused on results. The journal has moved with the times over the 90 years since its first publication, changing its name and scope to ensure it reflects the community it serves, but the dissemination of useful measurement knowledge has always been its core purpose. In 2013 we will be celebrating the sustained success of the journal with a series of articles and events throughout the year. These include a one-day 'Frontiers of Measurement' meeting to be held at the Institute of Physics, London, on 21 March. We do hope you can join us and leading speakers for this exciting event. We also think you will enjoy reading the articles in this special reviews issue which will showcase some of the best research in the journal's scope as well as look back over the past 90 years with a historical perspective by Richard Dewhurst and a historical review of the measurement of dielectric properties of materials by Udo Kaatze. Regular readers will already be familiar with our special issue programme, collecting original research papers in areas of interest

  4. Understanding solids the science of materials

    CERN Document Server

    Tilley, Richard J D

    2005-01-01

    A modern introduction to the subject taking a unique integrated approach designed to appeal to both science and engineering students. Covering a broad spectrum of topics, this book includes numerous up-to-date examples of real materials with relevant applications and a modern treatment of key concepts. The science bias allows this book to be equally accessible to engineers, chemists and physicists. * Carefully structured into self-contained bite-sized chapters to enhance student understanding * Questions have been designed to reinforce the concepts presented * Includes coverage of radioactivit

  5. Science-Technology Coupling: The Case of Mathematical Logic and Computer Science.

    Science.gov (United States)

    Wagner-Dobler, Roland

    1997-01-01

    In the history of science, there have often been periods of sudden rapprochements between pure science and technology-oriented branches of science. Mathematical logic as pure science and computer science as technology-oriented science have experienced such a rapprochement, which is studied in this article in a bibliometric manner. (Author)

  6. Re/Thinking the Nature of Technology in Science Classrooms

    Science.gov (United States)

    Kim, Mijung; Roth, Wolff-Michael

    2016-01-01

    With increasing technological changes and needs in society, technology and engineering education has received much attention in school science. Yet, technology traditionally has been subordinated to science or simply taken as the application of science. This position has resulted in a limited understanding of teaching technological and engineering…

  7. Applications of ionic liquids in polymer science and technology

    CERN Document Server

    2015-01-01

    This book summarizes the latest knowledge in the science and technology of ionic liquids and polymers in different areas. Ionic liquids (IL) are actively being investigated in polymer science and technology for a number of different applications. In the first part of the book the authors present the particular properties of ionic liquids as speciality solvents. The state-of-the art in the use of ionic liquids in polymer synthesis and modification reactions including polymer recycling is outlined. The second part focuses on the use of ionic liquids as speciality additives such as plasticizers or antistatic agents.  The third part examines the use of ionic liquids in the design of functional polymers (usually called polymeric ionic liquids (PIL) or poly(ionic liquids)). Many important applications in diverse scientific and industrial areas rely on these polymers, like polymer electrolytes in electrochemical devices, building blocks in materials science, nanocomposites, gas membranes, innovative anion sensitive...

  8. Surface analysis methods in materials science

    CERN Document Server

    Sexton, Brett; Smart, Roger

    1992-01-01

    The idea for this book stemmed from a remark by Philip Jennings of Murdoch University in a discussion session following a regular meeting of the Australian Surface Science group. He observed that a text on surface analysis and applica­ tions to materials suitable for final year undergraduate and postgraduate science students was not currently available. Furthermore, the members of the Australian Surface Science group had the research experience and range of coverage of sur­ face analytical techniques and applications to provide a text for this purpose. A of techniques and applications to be included was agreed at that meeting. The list intended readership of the book has been broadened since the early discussions, particularly to encompass industrial users, but there has been no significant alter­ ation in content. The editors, in consultation with the contributors, have agreed that the book should be prepared for four major groups of readers: - senior undergraduate students in chemistry, physics, metallur...

  9. Understanding solids: the science of materials

    CERN Document Server

    Tilley, Richard J. D.

    2013-01-01

    This edition contains new sections on the use of computing methods to solve materials problems and has been thoroughly updated to include the many developments and advances made in the past 10 years, e.g.  batteries, solar cells, lighting technology, laser...

  10. Brilliant Light in Life and Material Sciences

    CERN Document Server

    Tsakanov, Vasili

    2007-01-01

    The present book contains an excellent overview of the status and highlights of brilliant light facilities and their applications in biology, chemistry, medicine, materials and environmental sciences. Overview papers on diverse fields of research by leading experts are accompanied by the highlights in the near and long-term perspectives of brilliant X-Ray photon beam usage for fundamental and applied research. The book includes advanced topics in the fields of high brightness photon beams, instrumentation, the spectroscopy, microscopy, scattering and imaging experimental techniques and their applications. The book is strongly recommended for students, engineers and scientists in the field of accelerator physics, X-ray optics and instrumentation, life, materials and environmental sciences, bio and nanotechnology.

  11. Materials Science Research Rack-1 (MSRR-1)

    Science.gov (United States)

    2001-01-01

    This scale model depicts the Materials Science Research Rack-1 (MSRR-1) being developed by NASA's Marshall Space Flight Center and the European Space Agency (ESA) for placement in the Destiny laboratory module aboard the International Space Station. The rack is part of the plarned Materials Science Research Facility (MSRF) and is expected to include two furnace module inserts, a Quench Module Insert (being developed by NASA's Marshall Space Flight Center) to study directional solidification in rapidly cooled alloys and a Diffusion Module Insert (being developed by the European Space Agency) to study crystal growth, and a transparent furnace (being developed by NASA's Space Product Development program). Multi-user equipment in the rack is being developed under the auspices of NASA's Office of Biological and Physical Research (OBPR) and ESA. Key elements are labeled in other images (0101754, 0101829, 0101830, and TBD). This image is from a digital still camera; higher resolution is not available.

  12. Defense Science Board 1996 Summer Study Task Force On Tactics and Technology for 21st Century Military Superiority. Volume 2, Part 1. Supporting Materials

    Science.gov (United States)

    1996-10-01

    Nancy Chesser • Defense Science Board member ** Members Ex Officio Volume 2, Part 1, Conops 1- Leading Edge Strike Force Volume 2, Part 1, Conops 1...the Sense and Destroy Armor (SADARM) Munition (U), RAND, 1995, MR-510-A. Matsumura, J., E. Cardenas , K. Horn, E. McDonald, Future Army Long- Range

  13. Material science experiments at the ATLAS facility

    CERN Document Server

    Keinigs, R K; Atchison, W L; Bartsch, R R; Faehl, R J; Flower-Maudlin, E C; Hammerberg, J E; Holtkamp, D B; Kyrala, G A; Oro, D M; Parker, J V; Preston, D L; Removsky, R E; Scudder, D W; Sheehey, P T; Shlachter, J S; Taylor, A J; Tonks, D L; Turchi, P J; Chandler, E A

    2001-01-01

    Summary form only given, as follows. Three experimental campaigns designed for fielding on the Atlas Pulsed Power Facility are discussed. The foci of these experiments are directed toward a better understanding of three material science issues; (1) strength at high strain and high strain rate, (2) friction at material interfaces moving at high relative velocities, and (3) material failure in convergent geometry. Atlas provides an environment for investigating these problems in parameter regimes and geometries that are inaccessible with standard techniques. For example, flow stress measurements of material strength using conventional Hopkinson bar experiments are limited to strain rates ~10/sup 4/ sec/sup -1/. Atlas will be capable of imploding metal shells to combined strains of 200% and strain rates >10/sup 6/ sec/sup -1/. Data obtained regimes is used to test different constitutive strength models used in several Los Alamos hydrocodes. Dynamic friction has been investigated for nearly 300 years, but a first...

  14. Thermal Boundary Conductance: A Materials Science Perspective

    Science.gov (United States)

    Monachon, Christian; Weber, Ludger; Dames, Chris

    2016-07-01

    The thermal boundary conductance (TBC) of materials pairs in atomically intimate contact is reviewed as a practical guide for materials scientists. First, analytical and computational models of TBC are reviewed. Five measurement methods are then compared in terms of their sensitivity to TBC: the 3ω method, frequency- and time-domain thermoreflectance, the cut-bar method, and a composite effective thermal conductivity method. The heart of the review surveys 30 years of TBC measurements around room temperature, highlighting the materials science factors experimentally proven to influence TBC. These factors include the bulk dispersion relations, acoustic contrast, and interfacial chemistry and bonding. The measured TBCs are compared across a wide range of materials systems by using the maximum transmission limit, which with an attenuated transmission coefficient proves to be a good guideline for most clean, strongly bonded interfaces. Finally, opportunities for future research are discussed.

  15. Numerical modeling in materials science and engineering

    CERN Document Server

    Rappaz, Michel; Deville, Michel

    2003-01-01

    This book introduces the concepts and methodologies related to the modelling of the complex phenomena occurring in materials processing. After a short reminder of conservation laws and constitutive relationships, the authors introduce the main numerical methods: finite differences, finite volumes and finite elements. These techniques are developed in three main chapters of the book that tackle more specific problems: phase transformation, solid mechanics and fluid flow. The two last chapters treat inverse methods to obtain the boundary conditions or the material properties and stochastic methods for microstructural simulation. This book is intended for undergraduate and graduate students in materials science and engineering, mechanical engineering and physics and for engineering professionals or researchers who want to get acquainted with numerical simulation to model and compute materials processing.

  16. The Brazilian investment in science and technology

    Directory of Open Access Journals (Sweden)

    Pinheiro-Machado R.

    2001-01-01

    Full Text Available An analysis of Brazilian federal expenditures in science and technology is presented is this study. The 1990-1999 data were compiled from records provided by two federal agencies (MCT and CNPq responsible for managing most of the national budget related to these activities. The results indicate that the federal investments in Brazilian science and technology stagnated during the last decade (US$ 2.32 billion in 1990, US$ 2.39 billion in 1996, and US$ 2.36 billion in 1999. In contrast, a great increase in private investments in research was acknowledged both by industry and by the government during the same period, from US$ 2.12 to US$ 4.64 billion. However, this investment did not result in an increase in invention patents granted to residents (492 in 1990 and only 232 in 1997 or in a reduction of patent costs. Despite this unfavorable scenario, the number of graduate programs in the country has increased two-fold in the last decade and the contribution of Brazilians to the database of the Institute for Scientific Information has increased 4.7-fold from 1990 (2,725 scientific publications to 2000 (12,686 scientific publications. Unstable federal resources for science, together with the poor returns of private resources in terms of developing new technologies, may jeopardize the future of Brazilian technological development.

  17. Materials sciences programs fiscal year 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The purpose of this report is to provide a convenient compilation and index of the DOE Materials Sciences Division programs. This compilation is primarily intended for use by administrators, managers, and scientists to help coordinate research. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the Small Business Innovation Research Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F describes other user facilities, G as a summary of funding levels and H has indices characterizing research projects.

  18. Materials sciences programs: Fiscal year 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    The purpose of this report is to provide a convenient compilation and index of the DOE Materials Science Division programs. This compilation is primarily intended for use by administrators, managers, and scientists to help coordinate research. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the Small Business Innovation Research Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F describes other user facilities, G as a summary of funding levels and H has indices characterizing research projects.

  19. Science, technology and the 'grand challenge' of aging

    DEFF Research Database (Denmark)

    Jæger, Birgit; Peine, Alexander; Moors, Ellen

    2015-01-01

    In this paper, we introduce the themes addressed and the approaches used in this special issue. We start by briefly discussing the state of the art in research and policy making related to science, technology and ageing. We argue that an important gap characterizes this state of the art: current ...... on the socio-material constitution of later life that implicates an important agenda for the future study of ageing and gerontechnology innovation....

  20. Textile materials for lightweight constructions technologies, methods, materials, properties

    CERN Document Server

    2016-01-01

    In this book, experts on textile technologies convey both general and specific informa­tion on various aspects of textile engineering, ready-made technologies, and textile chemistry. They describe the entire process chain from fiber materials to various yarn constructions, 2D and 3D textile constructions, preforms, and interface layer design. In addition, the authors introduce testing methods, shaping and simulation techniques for the characterization of and structural mechanics calculations on anisotropic, pliable high-performance textiles, including specific examples from the fields of fiber plastic composites, textile concrete, and textile membranes. Readers will also be familiarized with the potential offered by increasingly popular textile structures, for instance in the fields of composite technology, construction technology, security technology, and membrane technology. Textile materials and semi-finished products have widely varied potential characteristics, and are commonly used as essential element...

  1. Incorporating digital technologies into science classes

    DEFF Research Database (Denmark)

    Hilton, Annette; Hilton, Geoff

    2013-01-01

    in science. The first case study involved primary school students (12 years old) using digital video production to record and represent their learning in science. This study extended writing-to-learn approaches to include video production to learn. The second case study involved Year 11 chemistry students...... (16 years old) learning about and with multiple digital representations in a unit on chemical bonding. Both qualitative and quantitative data were collected in the studies. The findings revealed that using digital technologies in student-centred activities can promote a range of positive outcomes...

  2. Innovative Technologies for Science Data Processing

    Science.gov (United States)

    Ramachandran, R.; Conover, H. T.; Graves, S. J.; Keiser, K.; Smith, M. R.

    2001-05-01

    The Information Technology and Systems Center (ITSC) at the University of Alabama has long been active in information technology research applied to Earth science data. This poster will showcase three key technologies being developed by ITSC: the Earth Science Markup Language (ESML), data mining applied to Earth science data, and data set independent subsetting tools. Each of these technologies is designed to ease data handling by Earth scientists, thereby freeing their time for research. ESML uses the eXtensible Markup Language (XML) as the basis for standardizing metadata or information about data formats, thus facilitating development of search, visualization, and analysis tools that are independent of data type or format. A unique feature of ESML is that it not only describes the content and structure of the data, but also provides semantic information, which allows an application to intelligently interpret the data. Thus, ESML provides a means for working with legacy, current, and future data sets in an integrated fashion, by defining a standard for external metadata to describe the content, structure, and semantics of a file. The Algorithm Development and Mining (ADaM) system applies data mining technologies to Earth science remote sensing data and other spatial data sets. The ADaM system consists of a series of interoperable data readers, preprocessing and analysis modules, and data writers, which can be linked together in many ways to create customized mining processes. This system has been applied to several Earth science problems including tropical cyclone detection, cloud classification, lightning detection, and mesoscale convective system identification. Current research is adapting data mining technologies for real-time processing on board satellites. ITSC has also developed several tools for science data subsetting. The HDF-EOS Web-Based Subsetter (HEW) is designed to work on any properly formatted HDF-EOS swath or grid data file. UAH is working with

  3. 77 FR 56681 - Nanoscale Science, Engineering, and Technology Subcommittee; Committee on Technology, National...

    Science.gov (United States)

    2012-09-13

    ... Doc No: 2012-22676] OFFICE OF SCIENCE AND TECHNOLOGY POLICY Nanoscale Science, Engineering, and Technology Subcommittee; Committee on Technology, National Science and Technology Council; Public Engagement Through Nano.gov Webinar AGENCY: Executive Office of the President, Office of Science and...

  4. Using Inexpensive Technology and Multimedia to Improve Science Education in Rural Communities of Nepal

    Science.gov (United States)

    Neupane, Sujaya

    2014-01-01

    This article explores an ongoing project that promotes science education in rural communities of western Nepal by using affordable technology. With the advent of inexpensive technology and multimedia resources, teaching materials for science education can be accessed with a much smaller budget than was previously possible. A preliminary survey…

  5. Technology to Upgrade Magneto-Materials

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    @@ CAS scientists have developed a new surface-coating technology to upgrade the product quality of China's permanent magnet materials. The success is appraised by an evaluation penal of the CAS Shenyang Branch in northeastern China' s Liaoning Province.

  6. HANFORD SCIENCE & TECHNOLOGY NEEDS STATEMENTS 2002

    Energy Technology Data Exchange (ETDEWEB)

    WIBLE, R.A.

    2002-04-01

    This document: (a) provides a comprehensive listing of the Hanford sites science and technology needs for fiscal year (FY) 2002; and (b) identifies partnering and commercialization opportunities within industry, other federal and state agencies, and the academic community. These needs were prepared by the Hanford projects (within the Project Hanford Management Contract, the Environmental Restoration Contract and the River Protection Project) and subsequently reviewed and endorsed by the Hanford Site Technology Coordination Group (STCG). The STCG reviews included participation of DOE-RL and DOE-ORP Management, site stakeholders, state and federal regulators, and Tribal Nations. These needs are reviewed and updated on an annual basis and given a broad distribution.

  7. Advances in nuclear science and technology

    CERN Document Server

    Greebler, Paul

    1968-01-01

    Advances in Nuclear Science and Technology Volume 4 provides information pertinent to the fundamental aspects of advanced reactor concepts. This book discusses the advances in various areas of general applicability, including modern perturbation theory, optimal control theory, and industrial application of ionizing radiations.Organized into seven chapters, this volume begins with an overview of the technology of sodium-cooled fast breeder power reactors and gas-cooled power reactors. This text then examines the key role of reactor safety in the development of fast breeder reactors. Other chapt

  8. Information Technology and the Cognitive Sciences

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    -computer interaction' studies have been focused on analysis of interface communication. These approaches have, quite naturally, resulted in a rather technology driven, bottom-up research strategy. Application of advanced information technology in large scale installation, however, also calls for a more system oriented......Different approaches to the study of cognitive systems can be identified. The AI related'cognitive science' is based on the information processing metaphor of human cognition in an attempt to reach 'computational' models for behaviour in well-formed micro worlds. Within the field of 'human...

  9. Sandia technology engineering and science accomplishments

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-01

    Sandia is a DOE multiprogram engineering and science laboratory with major facilities at Albuquerque, New Mexico, and Livermore, California, and a test range near Tonapah, Nevada. We have major research and development responsibilities for nuclear weapons, arms control, energy, the environment, economic competitiveness, and other areas of importance to the needs of the nation. Our principal mission is to support national defense policies by ensuring that the nuclear weapon stockpile meets the highest standards of safety, reliability, security, use control, and military performance. Selected unclassified technical activities and accomplishments are reported here. Topics include advanced manufacturing technologies, intelligent machines, computational simulation, sensors and instrumentation, information management, energy and environment, and weapons technology.

  10. Advances in software science and technology

    CERN Document Server

    Kamimura, Tsutomu

    1994-01-01

    This serial is a translation of the original works within the Japan Society of Software Science and Technology. A key source of information for computer scientists in the U.S., the serial explores the major areas of research in software and technology in Japan. These volumes are intended to promote worldwide exchange of ideas among professionals.This volume includes original research contributions in such areas as Augmented Language Logic (ALL), distributed C language, Smalltalk 80, and TAMPOPO-an evolutionary learning machine based on the principles of Realtime Minimum Skyline Detection.

  11. Combustion and explosion processes in physical chemistry and technology of inorganic materials

    Energy Technology Data Exchange (ETDEWEB)

    Merzhanov, Alexander G [Institute of Structural Macrokinetics and Materials Science, Russian Academy of Sciences, Chernogolovka, Moscow Region (Russian Federation)

    2003-04-30

    This review is the first attempt to generalise, in a descriptive-conceptual form, material-synthesising and material-affecting combustion and explosion processes and relevant physicochemical, technological and materials science problems with special emphasis on their practical (technological and industrial) applications.

  12. Nordic science and technology entrepreneurship education

    DEFF Research Database (Denmark)

    Warhuus, Jan P.; Basaiawmoit, Rajiv Vaid

    As a university discipline, entrepreneurship education (EEd) has moved from whether it can be taught, to what and how it should be taught (Kuratko 2005) and beyond the walls of the business school (Hindle 2007), where a need for a tailored, disciplinary approach is becoming apparent. Within science......, technology, engineering, and mathematics (STEM) EEd, tacit knowledge of what works and why is growing, while reflections to activate this knowledge are often kept local or reported to the EEd community as single cases, which are difficult compare and contrast for the purpose of deriving cross-case patterns......, findings, and knowledge. The objective of this paper is to decode this tacit knowledge within Nordic science and technology institutions, and use it to provide guidance for future EEd program designs and improvements....

  13. Chemistry and Materials Science Directorate 2005 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Diaz De La Rubia, T; Fluss, M J; Rath, K; Rennie, G; Shang, S; Kitrinos, G

    2006-08-08

    In 1952, we began laboratory operations in the barracks building of the Naval Air Station with approximately 50 employees. Today, the Chemistry and Materials Science (CMS) Directorate is a major organization at the Lawrence Livermore National Laboratory with more than 500 employees who continue to contribute to our evolving national security mission. For more than half a century, the mission of the Laboratory revolved primarily around nuclear deterrence and associated defense technologies. Today, Livermore supports a broad-based national security mission, and our specialized capabilities increasingly support emerging missions in human health and energy security. In the future, CMS will play a significantly expanded role in science and technology at the intersection of national security, energy and environment, and health. Our world-class workforce will provide the science and technology base for radically innovative materials to our programs and sponsors. Our 2005 Annual Report describes how our successes and breakthroughs follow a path set forward by our strategic plan and four organizing research themes, each with key scientific accomplishments by our staff and collaborators. Organized into two major sections-research themes and dynamic teams, this report focuses on achievements arising from earlier investments that address future challenges. The research presented in this annual report gives substantive examples of how we are proceeding in each of these four theme areas and how they are aligned with our national security mission. Research Themes: (1) Materials Properties and Performance under Extreme Conditions--We are developing ultrahard nanocrystalline metals, exploring the properties of nanotubes when exposed to very high temperatures, and engineering stronger materials to meet future needs for materials that can withstand extreme conditions. (2) Chemistry under Extreme Conditions and Chemical Engineering to Support National-Security Programs--Our recent

  14. Chemistry and Materials Science Directorate 2005 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Diaz De La Rubia, T; Fluss, M J; Rath, K; Rennie, G; Shang, S; Kitrinos, G

    2006-08-08

    In 1952, we began laboratory operations in the barracks building of the Naval Air Station with approximately 50 employees. Today, the Chemistry and Materials Science (CMS) Directorate is a major organization at the Lawrence Livermore National Laboratory with more than 500 employees who continue to contribute to our evolving national security mission. For more than half a century, the mission of the Laboratory revolved primarily around nuclear deterrence and associated defense technologies. Today, Livermore supports a broad-based national security mission, and our specialized capabilities increasingly support emerging missions in human health and energy security. In the future, CMS will play a significantly expanded role in science and technology at the intersection of national security, energy and environment, and health. Our world-class workforce will provide the science and technology base for radically innovative materials to our programs and sponsors. Our 2005 Annual Report describes how our successes and breakthroughs follow a path set forward by our strategic plan and four organizing research themes, each with key scientific accomplishments by our staff and collaborators. Organized into two major sections-research themes and dynamic teams, this report focuses on achievements arising from earlier investments that address future challenges. The research presented in this annual report gives substantive examples of how we are proceeding in each of these four theme areas and how they are aligned with our national security mission. Research Themes: (1) Materials Properties and Performance under Extreme Conditions--We are developing ultrahard nanocrystalline metals, exploring the properties of nanotubes when exposed to very high temperatures, and engineering stronger materials to meet future needs for materials that can withstand extreme conditions. (2) Chemistry under Extreme Conditions and Chemical Engineering to Support National-Security Programs--Our recent

  15. Formulation of disperse systems science and technology

    CERN Document Server

    Tadros, Tharwat F

    2014-01-01

    This book presents comprehensively the science and technology behind the formulation of disperse systems like emulsions, suspensions, foams and others. Starting with a general introduction, the book covers a broad range of topics like the role of different classes of surfactants, stability of disperse systems, formulation of different dispersions, evaluation of formulations and many more. Many examples are included, too. Written by the experienced author and editor Tharwart Tadros, this book is indispensable for every scientist working in the field.

  16. Armored Combat Vehicles Science and Technology Plan

    Science.gov (United States)

    1982-11-01

    analysis0 SS 94 GHz TRANSMITTER/RECEIVER MODULE Provide low cost transciever modules for pulsed, FMCW or FSK radars at 35-100 Gfz. STAC!LTZATTOU...prepared by TACOM. 3 !. ... Ill11111iilIl 0 1 lPI IPIt’IlA BEST AVAILABLE.COPY The Armored Combat Vehicle Science and Technology Base Development program...classes of Army Systems including Radar , E-O, AD. Communications, Missiles and EW. NETWORK MANAGEMENT INTEGRATION - BATTLEFIELD INFORMATION

  17. Nanoscale Science, Engineering and Technology Research Directions

    Energy Technology Data Exchange (ETDEWEB)

    Lowndes, D. H.; Alivisatos, A. P.; Alper, M.; Averback, R. S.; Jacob Barhen, J.; Eastman, J. A.; Imre, D.; Lowndes, D. H.; McNulty, I.; Michalske, T. A.; Ho, K-M; Nozik, A. J.; Russell, T. P.; Valentin, R. A.; Welch, D. O.; Barhen, J.; Agnew, S. R.; Bellon, P.; Blair, J.; Boatner, L. A.; Braiman, Y.; Budai, J. D.; Crabtree, G. W.; Feldman, L. C.; Flynn, C. P.; Geohegan, D. B.; George, E. P.; Greenbaum, E.; Grigoropoulos, C.; Haynes, T. E.; Heberlein, J.; Hichman, J.; Holland, O. W.; Honda, S.; Horton, J. A.; Hu, M. Z.-C.; Jesson, D. E.; Joy, D. C.; Krauss, A.; Kwok, W.-K.; Larson, B. C.; Larson, D. J.; Likharev, K.; Liu, C. T.; Majumdar, A.; Maziasz, P. J.; Meldrum, A.; Miller, J. C.; Modine, F. A.; Pennycook, S. J.; Pharr, G. M.; Phillpot, S.; Price, D. L.; Protopopescu, V.; Poker, D. B.; Pui, D.; Ramsey, J. M.; Rao, N.; Reichl, L.; Roberto, J.; Saboungi, M-L; Simpson, M.; Strieffer, S.; Thundat, T.; Wambsganss, M.; Wendleken, J.; White, C. W.; Wilemski, G.; Withrow, S. P.; Wolf, D.; Zhu, J. H.; Zuhr, R. A.; Zunger, A.; Lowe, S.

    1999-01-01

    This report describes important future research directions in nanoscale science, engineering and technology. It was prepared in connection with an anticipated national research initiative on nanotechnology for the twenty-first century. The research directions described are not expected to be inclusive but illustrate the wide range of research opportunities and challenges that could be undertaken through the national laboratories and their major national scientific user facilities with the support of universities and industry.

  18. JPRS Report, Science & Technology, China: Energy

    Science.gov (United States)

    2007-11-02

    introduce to China new manufacturing and design techniques for super-cntical generators. The two super-critical generators, he said, can save about 5...equipment locally. As a result, some of the foreign companies have con- tracted with domestic manufacturers to make the equip- ment Nearly $50 million...34golden guitar ," has made science and technology establish themselves in its enterprises, and by the end of 1988 it had produced a cumulative 37.406

  19. Recent progress in terahertz science and technology

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The relatively new technique of coherent electromagnetic radiation, in the region of 1012 Hz, has potential to detect the nature of low energy processes in physics, chemistry and biomedicine. In this review article, an overview of recent progress of terahertz (THz) science and technology is presented. The development of the THz generation and detection system, the THz radiation applications which include THz time-domain spectroscopy and T-ray imaging, and the future potential of THz wave research are discussed.

  20. Science and technology review, October 1997

    Energy Technology Data Exchange (ETDEWEB)

    Upadhye, R.

    1997-10-01

    This month`s issue contains articles entitled Livermore Science and Technology Garner Seven 1997 R&D 100 Awards; New Interferometer Measures to Atomic Dimensions; Compact More Powerful Chips from Virtually Defect-free Thin Film Systems, A New Precision Cutting Tool; The Femtosecond Laser; MELD: A CAD Tool for Photonoics Systems, The Tiltmeter: Tilting at Great Depths to Find Oil; Smaller Insulators Handle Higher Voltage; and Compact Storage Management Software: The Next Generation.

  1. Charter of the Science and Technology Policy Council (STPC)

    Science.gov (United States)

    The EPA Science and Technology Policy Council (STPC) will identify critical science and technology policy issues and develop policies to help advance the Administrator's environmental and public health priorities.

  2. The Danish Association for Science and Technology Studies

    DEFF Research Database (Denmark)

    A presentation of the Danish Association for Science and Technology Studies (DASTS). Organization, experiences, challenges and future developments.......A presentation of the Danish Association for Science and Technology Studies (DASTS). Organization, experiences, challenges and future developments....

  3. Technology as "Applied Science": A Serious Misconception that Reinforces Distorted and Impoverished Views of Science

    Science.gov (United States)

    Gil-Perez, Daniel; Vilches, Amparo; Fernandez, Isabel; Cachapuz, Antonio; Praia, Joao; Valdes, Pablo; Salinas, Julia

    2005-01-01

    The current consideration of technology as "applied science", this is to say, as something that comes "after" science, justifies the lack of attention paid to technology in science education. In our paper we question this simplistic view of the science-technology relationship, historically rooted in the unequal appreciation of intellectual and…

  4. Science and Technology Diplomacy with Cuba

    Science.gov (United States)

    Colon, Frances

    President Obama's announcement of U. S. policy change toward Cuba and increased freedom of interaction with the Cuban people opens unprecedented and long-awaited opportunities for the scientific and engineering communities in the U. S. and in Cuba to establish and expand collaborative efforts that will greatly advance U.S. and Cuba science and technology agendas. New rules for export of donated-only items for scientific use will bring researchers closer to the level of their professional peers around the world. Increasing Cubans' access to information will result in greater interactions between scientific communities and enable the sharing of ideas and discoveries that can fuel entrepreneurship on the island. The scientific community has expressed an extraordinary level of interest in the wide range of scientific opportunities that the new policy presents, in collaborating with their Cuban counterparts, and in supporting the development of scientific capacity in Cuba. In response to numerous expressions of interest and inquiries from the scientific community, the Office of the Science and Technology Adviser to the Secretary of State (STAS) has engaged in public outreach to inform the U.S. science and technology community of the implications of the new policy for collaborative research, emerging scientific opportunities, and the standing limitations for engagement with the people of Cuba.

  5. Narrative Pedagogies in Science, Mathematics and Technology

    Science.gov (United States)

    Hobbs, Linda; Davis, Rob

    2013-06-01

    Despite years of research, there remains serious concern regarding the engagement of students in science, mathematics and technology education. In this paper, the authors explore how narrative pedagogies are used in science, mathematics and technology in order to make the subjects meaningful. The paper focuses specifically on the role and aesthetic nature of narrative as a pedagogical approach in these school subjects and between school sectors. Case study methodology was used to compare the findings of two independent studies investigating the role of narrative-based pedagogies in mathematics and science (first author) and technology (second author). Based on this comparison, this paper proposes two perspectives on narrative-based pedagogies that deal with the connection of students with the subject: inward-looking that situated the learner within the story generated around artefact creation, and outward-looking that situated the stories of the content into students' lifeworlds. The use of this comparative lens enabled a higher level of analysis that could not have been achieved by each research programme, generating a broader narrative that provided deeper insight into the teaching and learning experience.

  6. Constitutional moments in governing science and technology.

    Science.gov (United States)

    Jasanoff, Sheila

    2011-12-01

    Scholars in science and technology studies (STS) have recently been called upon to advise governments on the design of procedures for public engagement. Any such instrumental function should be carried out consistently with STS's interpretive and normative obligations as a social science discipline. This article illustrates how such threefold integration can be achieved by reviewing current US participatory politics against a 70-year backdrop of tacit constitutional developments in governing science and technology. Two broad cycles of constitutional adjustment are discerned: the first enlarging the scope of state action as well as public participation, with liberalized rules of access and sympathetic judicial review; the second cutting back on the role of the state, fostering the rise of an academic-industrial complex for technology transfer, and privatizing value debates through increasing delegation to professional ethicists. New rules for public engagement in the United Sates should take account of these historical developments and seek to counteract some of the anti-democratic tendencies observable in recent decades.

  7. RUSSIAN FEDERATION STATE PRIZE IN SCIENCE AND TECHNOLOGY FOR 2009

    OpenAIRE

    2010-01-01

    The Russian Federation State Prize in the field of Science and Technology for 2009 for "A Set of Scientific Works on the Development of Laser and Information Technologies in Medicine" (Presidential Decree N° 678, dated June 6th, 2010) was awarded jointly to Doctor of Physical and Mathematical Sciences, Academician of the Russian Academy of Sciences, Director of the Institute of Laser and Information Technologies, Russian Academy of Sciences, V. Ya. Panchenko; to Doctor of Medical Sciences, Ac...

  8. Science and Technology Text Mining: Global Technology Watch

    Science.gov (United States)

    2003-07-01

    Prog Bio, 57: (3), 1998. 20. Swanson, D.R., “Fish Oil, Raynauds Syndrome , and Undiscovered Public Knowledge”, Perspect Biol Med, .30: (1), 1986. 21...based, required to understand the status of science and technology ( S &T) globally. Since one important dissemination avenue for S &T is its literature...literature in S &T development and exploitation. Ready access to the results of all global research performed is required in order to: REPORT DOCUMENTATION

  9. Chemistry and materials science research report

    Energy Technology Data Exchange (ETDEWEB)

    1990-05-31

    The research reported here in summary form was conducted under the auspices of Weapons-Supporting Research (WSR) and Institutional Research and Development (IR D). The period covered is the first half of FY90. The results reported here are for work in progress; thus, they may be preliminary, fragmentary, or incomplete. Research in the following areas are briefly described: energetic materials, tritium, high-Tc superconductors, interfaces, adhesion, bonding, fundamental aspects of metal processing, plutonium, synchrotron-radiation-based materials science, photocatalysis on doped aerogels, laser-induced chemistry, laser-produced molecular plasmas, chemistry of defects, dta equipment development, electronic structure study of the thermodynamic and mechanical properties of Al-Li Alloys, and the structure-property link in sub-nanometer materials.

  10. Material science lesson from the biological photosystem

    Science.gov (United States)

    Kim, Younghye; Lee, Jun Ho; Ha, Heonjin; Im, Sang Won; Nam, Ki Tae

    2016-08-01

    Inspired by photosynthesis, artificial systems for a sustainable energy supply are being designed. Each sequential energy conversion process from light to biomass in natural photosynthesis is a valuable model for an energy collection, transport and conversion system. Notwithstanding the numerous lessons of nature that provide inspiration for new developments, the features of natural photosynthesis need to be reengineered to meet man's demands. This review describes recent strategies toward adapting key lessons from natural photosynthesis to artificial systems. We focus on the underlying material science in photosynthesis that combines photosystems as pivotal functional materials and a range of materials into an integrated system. Finally, a perspective on the future development of photosynthesis mimetic energy systems is proposed.

  11. Chemistry and Materials Science Department annual report, 1988--1989

    Energy Technology Data Exchange (ETDEWEB)

    Borg, R.J.; Sugihara, T.T.; Cherniak, J.C.; Corey, C.W. [eds.

    1989-12-31

    This is the first annual report of the Chemistry & Materials Science (C&MS) Department. The principal purpose of this report is to provide a concise summary of our scientific and technical accomplishments for fiscal years 1988 and 1989. The report is also tended to become part of the archival record of the Department`s activities. We plan to publish future editions annually. The activities of the Department can be divided into three broad categories. First, C&MS staff are assigned by the matrix system to work directly in a program. These programmatic assignments typically involve short deadlines and critical time schedules. A second category is longer-term research and development in technologies important to Laboratory programs. The focus and direction of this technology-base work are generally determined by programmatic needs. Finally, the Department manages its own research program, mostly long-range in outlook and basic in orientation. These three categories are not mutually exclusive but form a continuum of technical activities. Representative examples of all three are included in this report. The principal subject matter of this report has been divided into six sections: Innovations in Analysis and Characterization, Advanced Materials, Metallurgical Science and Technology, Surfaces and Interfaces, Energetic Materials and Chemical Synthesis, and Energy-Related Research and Development.

  12. An Interdisciplinary Program in Materials Science at James Madison University.

    Science.gov (United States)

    Hughes, Chris

    2008-03-01

    Over the past decade a core group of faculty at James Madison University has created an interdisciplinary program in materials science that provides our students with unique courses and research experiences that augment the existing, high-quality majors in physics and astronomy, chemistry and biochemistry, geology and environmental science, mathematics and statistics, and integrated science and technology. The university started this program by creating a Center for Materials Science whose budget is directly allocated by the provost. This source of funds acts as seed money for research, support for students, and a motivating factor for each of the academic units to support the participation of their faculty in the program. Courses were created at the introductory and intermediate level that are cross-listed by the departments to encourage students to enroll in them as electives toward their majors. Furthermore, the students are encouraged to participate in undergraduate research in materials since this is the most fundamental unifying theme across the disciplines. This talk will cover some of the curricular innovations that went into the design of the program to make it successful, examples of faculty and student research and how that feeds back into the classroom, and success stories of the interactions that have developed between departments because of this program. Student outcomes and future plans to improve the program will also be discussed.

  13. Perspective: Materials informatics and big data: Realization of the "fourth paradigm" of science in materials science

    Science.gov (United States)

    Agrawal, Ankit; Choudhary, Alok

    2016-05-01

    Our ability to collect "big data" has greatly surpassed our capability to analyze it, underscoring the emergence of the fourth paradigm of science, which is data-driven discovery. The need for data informatics is also emphasized by the Materials Genome Initiative (MGI), further boosting the emerging field of materials informatics. In this article, we look at how data-driven techniques are playing a big role in deciphering processing-structure-property-performance relationships in materials, with illustrative examples of both forward models (property prediction) and inverse models (materials discovery). Such analytics can significantly reduce time-to-insight and accelerate cost-effective materials discovery, which is the goal of MGI.

  14. Nanobiotechnology: synthetic biology meets materials science.

    Science.gov (United States)

    Jewett, Michael C; Patolsky, Fernando

    2013-08-01

    Nanotechnology, the area of science focused on the control of matter in the nanometer scale, allows ground-breaking changes of the fundamental properties of matter that are often radically different compared to those exhibited by the bulk counterparts. In view of the fact that dimensionality plays a key role in determining the qualities of matter, the realization of the great potential of nanotechnology has opened the door to other disciplines such as life sciences and medicine, where the merging between them offers exciting new applications, along with basic science research. The application of nanotechnology in life sciences, nanobiotechnology, is now having a profound impact on biological circuit design, bioproduction systems, synthetic biology, medical diagnostics, disease therapy and drug delivery. This special issue is dedicated to the overview of how we are learning to control biopolymers and biological machines at the molecular- and nanoscale. In addition, it covers far-reaching progress in the design and synthesis of nanoscale materials, thus enabling the construction of integrated systems in which the component blocks are comparable in size to the chemical and biological entities under investigation.

  15. RAW MATERIAL DEWATERING ELECTROMAGNETIC TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Burdo O.G.

    2012-04-01

    Full Text Available Moisture transfer schemes and mechanisms of capillary-porous materials dehydration are considered. Mechanical, thermal and diffusive mechanisms for different moisture linkage forms are analyzed, driving forces and velocity coefficients of processes are estimated. Availability of dehydration in microwave frequencies range field is shown. A new generalized complex that takes into account a specificity of micro- and nanokinetics of moisture transfer in products is proposed. The explanation of barodiffusive moisture transfer process mechanism in a product is shown. The results of experimental researches, in which specific energy of 1,9 MJ per 1 kg of removed moisture is reached, are shown. The tests results of the band dryer with microwave and infrared energy generators are presented.

  16. Petroleum Science and Technology Institute with the TeXas Earth and Space Science (TXESS) Revolution

    Science.gov (United States)

    Olson, H. C.; Olson, J. E.; Bryant, S. L.; Lake, L. W.; Bommer, P.; Torres-Verdin, C.; Jablonowski, C.; Willis, M.

    2009-12-01

    The TeXas Earth and Space Science (TXESS) Revolution, a professional development program for 8th- thru 12th-grade Earth Science teachers, presented a one-week Petroleum Science and Technology Institute at The University of Texas at Austin campus. The summer program was a joint effort between the Jackson School of Geosciences and the Department of Petroleum and Geosystems Engineering. The goal of the institute was to focus on the STEM components involved in the petroleum industry and to introduce teachers to the larger energy resources theme. The institute kicked off with a welcoming event and tour of a green, energy-efficient home (LEED Platinum certified) owned by one of the petroleum engineering faculty. Tours of the home included an introduction to rainwater harvesting, solar energy, sustainable building materials and other topics on energy efficiency. Classroom topics included drilling technology (including a simulator lab and an overview of the history of the technology), energy use and petroleum geology, well-logging technology and interpretation, reservoir engineering and volumetrics (including numerous labs combining chemistry and physics), risk assessment and economics, carbon capture and storage (CO2 sequestration technology) and hydraulic fracturing. A mid-week field trip included visiting the Ocean Star offshore platform in Galveston, the Weiss Energy Hall at the Houston Museum of Science and Schlumberger (to view 3-D visualization technology) in Houston. Teachers remarked that they really appreciated the focused nature of the institute and especially found the increased use of mathematics both a tool for professional growth, as well as a challenge for them to use more math in their science classes. STEM integration was an important feature of the summer institute, and teachers found the integration of science (earth sciences, geophysics), technology, engineering (petroleum, chemical and reservoir) and mathematics particularly valuable. Pre

  17. Science and Technology Review September 2001

    Energy Technology Data Exchange (ETDEWEB)

    Quong, A.A.

    2001-09-01

    This issue contains the following articles: (1) ''Technology Transfer Takes a Team''. (2) ''Zeroing In on Genes'' With Gene Recovery Microdissection, sequencing an entire genome to find its genes will no longer be necessary. (3) ''Big Glass for a Big Laser'' Together, Livermore and two leading laser glass producers have developed a revolutionary new method for making big pieces of high-quality laser glass. (4) ''Lasershot Makes Its Mark'' The Lasershot Marking System creates permanent, high-resolution identification marks on safety-critical metal parts, without weakening the part. (5) ''Tracking the Global Spread of Advanced Technology'' The Center for Global Security Research takes on the challenge of analyzing and raising awareness of the potential national security threats posed by advances in science and technology.

  18. Ukrainian Program for Material Science in Microgravity

    Science.gov (United States)

    Fedorov, Oleg

    Ukrainian Program for Material Sciences in Microgravity O.P. Fedorov, Space Research Insti-tute of NASU -NSAU, Kyiv, The aim of the report is to present previous and current approach of Ukrainian research society to the prospect of material sciences in microgravity. This approach is based on analysis of Ukrainian program of research in microgravity, preparation of Russian -Ukrainian experiments on Russian segment of ISS and development of new Ukrainian strategy of space activity for the years 2010-2030. Two parts of issues are discussed: (i) the evolution of our views on the priorities in microgravity research (ii) current experiments under preparation and important ground-based results. item1 The concept of "space industrialization" and relevant efforts in Soviet and post -Soviet Ukrainian research institutions are reviewed. The main topics are: melt supercooling, crystal growing, testing of materials, electric welding and study of near-Earth environment. The anticipated and current results are compared. item 2. The main experiments in the framework of Ukrainian-Russian Research Program for Russian Segment of ISS are reviewed. Flight installations under development and ground-based results of the experiments on directional solidification, heat pipes, tribological testing, biocorrosion study is presented. Ground-based experiments and theoretical study of directional solidification of transparent alloys are reviewed as well as preparation of MORPHOS installation for study of succinonitrile -acetone in microgravity.

  19. Science and technology review: June 1996

    Energy Technology Data Exchange (ETDEWEB)

    Failor, B.; Stull, S. [eds.

    1996-06-01

    The first feature article is a survey of four research projects showing how theory and modeling efforts by scientist in the Chemistry and Materials Science Directorate at LLNL are advancing the understanding of the property of materials with consideration of underlying structures. The second feature article discusses Livermore and DOE`s Oakland Operations Office teaming up to decontaminate, decommission, and close out--on time and under budget--the Ann Arbor Inertial Confinement Fusion Facility in Michigan. Two research highlights on Mammoth Mountain CO{sub 2} mystery and osteoporosis are also included.

  20. Radioactive Dry Process Material Treatment Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. J.; Hung, I. H.; Kim, K. K. (and others)

    2007-06-15

    The project 'Radioactive Dry Process Material Treatment Technology Development' aims to be normal operation for the experiments at DUPIC fuel development facility (DFDF) and safe operation of the facility through the technology developments such as remote operation, maintenance and pair of the facility, treatment of various high level process wastes and trapping of volatile process gases. DUPIC Fuel Development Facility (DFDF) can accommodate highly active nuclear materials, and now it is for fabrication of the oxide fuel by dry process characterizing the proliferation resistance. During the second stage from march 2005 to February 2007, we carried out technology development of the remote maintenance and the DFDF's safe operation, development of treatment technology for process off-gas, and development of treatment technology for PWR cladding hull and the results was described in this report.

  1. Multiple-probe scanning probe microscopes for nanoarchitectonic materials science

    Science.gov (United States)

    Nakayama, Tomonobu; Shingaya, Yoshitaka; Aono, Masakazu

    2016-11-01

    Nanoarchitectonic systems are of interest for utilizing a vast range of nanoscale materials for future applications requiring a huge number of elemental nanocomponents. To explore the science and technology of nanoarchitectonics, advanced characterization tools that can deal with both nanoscale objects and macroscopically extended nanosystems are demanded. Multiple-probe scanning probe microscopes (MP-SPMs) are powerful tools that meet this demand because they take the advantages of conventional scanning probe microscopes and realize atomically precise electrical measurements, which cannot be done with conventional microprobing systems widely used in characterizing materials and devices. Furthermore, an MP-SPM can be used to operate some nanoarchitectonic systems. In this review, we overview the indispensable features of MP-SPMs together with the past, present and future of MP-SPM technology.

  2. Batteries for sustainability selected entries from the encyclopedia of sustainability science and technology

    CERN Document Server

    Brodd, Ralph J

    2012-01-01

    This collection of selected peer-reviewed papers from Springer's Encyclopedia of Sustainability Science and Technology covers a wide range of battery types, materials and applications, and includes a thorough assessment of their relative sustainability.

  3. Carbon The Future Material for Advanced Technology Applications

    CERN Document Server

    Messina, Giacomo

    2006-01-01

    Carbon-based materials and their applications constitute a burgeoning topic of scientific research among scientists and engineers attracted from diverse areas such as applied physics, materials science, biology, mechanics, electronics and engineering. Further development of current materials, advances in their applications, and discovery of new forms of carbon are the themes addressed by the frontier research in these fields. This book covers all the fundamental topics concerned with amorphous and crystalline C-based materials, such as diamond, diamond-like carbon, carbon alloys, carbon nanotubes. The goal is, by coherently progressing from growth - and characterisation techniques to technological applications for each class of material, to fashion the first comprehensive state-of-the-art review of this fast evolving field of research in carbon materials.

  4. Multicultural Science Education and Curriculum Materials

    Science.gov (United States)

    Atwater, Mary M.

    2010-01-01

    This article describes multicultural science education and explains the purposes of multicultural science curricula. It also serves as an introductory article for the other multicultural science education activities in this special issue of "Science Activities".

  5. Integrating Science and Technology: Using Technological Pedagogical Content Knowledge as a Framework to Study the Practices of Science Teachers

    Science.gov (United States)

    Pringle, Rose M.; Dawson, Kara; Ritzhaupt, Albert D.

    2015-01-01

    In this study, we examined how teachers involved in a yearlong technology integration initiative planned to enact technological, pedagogical, and content practices in science lessons. These science teachers, engaged in an initiative to integrate educational technology in inquiry-based science lessons, provided a total of 525 lesson plans for this…

  6. New directions in the science and technology of advanced sheet explosive formulations and the key energetic materials used in the processing of sheet explosives: Emerging trends.

    Science.gov (United States)

    Talawar, M B; Jangid, S K; Nath, T; Sinha, R K; Asthana, S N

    2015-12-30

    This review presents the work carried out by the international community in the area of sheet explosive formulations and its applications in various systems. The sheet explosive is also named as PBXs and is a composite material in which solid explosive particles like RDX, HMX or PETN are dispersed in a polymeric matrix, forms a flexible material that can be rolled/cut into sheet form which can be applied to any complex contour. The designed sheet explosive must possess characteristic properties such as flexible, cuttable, water proof, easily initiable, and safe handling. The sheet explosives are being used for protecting tanks (ERA), light combat vehicle and futuristic infantry carrier vehicle from different attacking war heads etc. Besides, sheet explosives find wide applications in demolition of bridges, ships, cutting and metal cladding. This review also covers the aspects such as risks and hazard analysis during the processing of sheet explosive formulations, effect of ageing on sheet explosives, detection and analysis of sheet explosive ingredients and the R&D efforts of Indian researchers in the development of sheet explosive formulations. To the best of our knowledge, there has been no review article published in the literature in the area of sheet explosives.

  7. The Mars Science Laboratory Organic Check Material

    Science.gov (United States)

    Conrad, Pamela G.; Eigenbrode, J. E.; Mogensen, C. T.; VonderHeydt, M. O.; Glavin, D. P.; Mahaffy, P. M.; Johnson, J. A.

    2011-01-01

    The Organic Check Material (OCM) has been developed for use on the Mars Science Laboratory mission to serve as a sample standard for verification of organic cleanliness and characterization of potential sample alteration as a function of the sample acquisition and portioning process on the Curiosity rover. OCM samples will be acquired using the same procedures for drilling, portioning and delivery as are used to study martian samples with The Sample Analysis at Mars (SAM) instrument suite during MSL surface operations. Because the SAM suite is highly sensitive to organic molecules, the mission can better verify the cleanliness of Curiosity's sample acquisition hardware if a known material can be processed through SAM and compared with the results obtained from martian samples.

  8. Discovery machines accelerators for science, technology, health and innovation

    CERN Document Server

    Australian Academy of Sciences

    2016-01-01

    Discovery machines: Accelerators for science, technology, health and innovation explores the science of particle accelerators, the machines that supercharge our ability to discover the secrets of nature and have opened up new tools in medicine, energy, manufacturing, and the environment as well as in pure research. Particle accelerators are now an essential ingredient in discovery science because they offer new ways to analyse the world, such as by probing objects with high energy x-rays or colliding them beams of electrons. They also have a huge—but often unnoticed—impact on all our lives; medical imaging, cancer treatment, new materials and even the chips that power our phones and computers have all been transformed by accelerators of various types. Research accelerators also provide fundamental infrastructure that encourages better collaboration between international and domestic scientists, organisations and governments.

  9. The potential impact of microgravity science and technology on education

    Science.gov (United States)

    Wargo, M. J.

    1992-01-01

    The development of educational support materials by NASA's Microgravity Science and Applications Division is discussed in the light of two programs. Descriptions of the inception and application possibilities are given for the Microgravity-Science Teacher's Guide and the program of Undergraduate Research Opportunities in Microgravity Science and Technology. The guide is intended to introduce students to the principles and research efforts related to microgravity, and the undergraduate program is intended to reinforce interest in the space program. The use of computers and electronic communications is shown to be an important catalyst for the educational efforts. It is suggested that student and teacher access to these programs be enhanced so that they can have a broader impact on the educational development of space-related knowledge.

  10. Understanding student participation and choice in science and technology education

    CERN Document Server

    Dillon, Justin; Ryder, Jim

    2015-01-01

    Drawing on data generated by the EU’s Interests and Recruitment in Science (IRIS) project, this volume examines the issue of young people’s participation in science, technology, engineering and mathematics education. With an especial focus on female participation, the chapters offer analysis deploying varied theoretical frameworks, including sociology, social psychology and gender studies. The material also includes reviews of relevant research in science education and summaries of empirical data concerning student choices in STEM disciplines in five European countries. Featuring both quantitative and qualitative analyses, the book makes a substantial contribution to the developing theoretical agenda in STEM education. It augments available empirical data and identifies strategies in policy-making that could lead to improved participation—and gender balance—in STEM disciplines. The majority of the chapter authors are IRIS project members, with additional chapters written by specially invited contribu...

  11. #2) Sensor Technology-State of the Science | Science ...

    Science.gov (United States)

    Establish market surveys of commercially-available air quality sensorsConduct an extensive literature survey describing the state of sensor technologiesInvestigate emerging technologies and their potential to meet future air quality monitoring needs for the Agency as well as other partners/stakeholders Develop sensor user guidesEducate sensor developers/sensors users on the state of low cost censorsFacilitate knowledge transfer to Federal/Regional/State air quality associatesWork directly with sensor developers to dramatically speed up the development of next generation air monitoring Support ORD’s Sensor Roadmap by focusing on areas of highest priority (NAAQS, Air Toxics, Citizen Science)Establish highly integrated research efforts across ORD and its partners (internal/external) to ensure consistent The National Exposure Research Laboratory (NERL) Human Exposure and Atmospheric Sciences Division (HEASD) conducts research in support of EPA mission to protect human health and the environment. HEASD research program supports Goal 1 (Clean Air) and Goal 4 (Healthy People) of EPA strategic plan. More specifically, our division conducts research to characterize the movement of pollutants from the source to contact with humans. Our multidisciplinary research program produces Methods, Measurements, and Models to identify relationships between and characterize processes that link source emissions, environmental concentrations, human exposures, and target-tissue dose.

  12. Science & Technology Review October/November 2016

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, R. L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meissner, C. N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotta, P. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-11-11

    At Lawrence Livermore National Laboratory, we focus on science and technology research to ensure our nation’s security. We also apply that expertise to solve other important national problems in energy, bioscience, and the environment. Science & Technology Review is published eight times a year to communicate, to a broad audience, the Laboratory’s scientific and technological accomplishments in fulfilling its primary missions. The publication’s goal is to help readers understand these accomplishments and appreciate their value to the individual citizen, the nation, and the world. The Laboratory is operated by Lawrence Livermore National Security, LLC (LLNS), for the Department of Energy’s National Nuclear Security Administration. LLNS is a partnership involving Bechtel National, University of California, Babcock & Wilcox, Washington Division of URS Corporation, and Battelle in affiliation with Texas A&M University. More information about LLNS is available online at www.llnsllc.com. Please address any correspondence (including name and address changes) to S&TR, Mail Stop L-664, Lawrence Livermore National Laboratory, P.O. Box 808, Livermore, California 94551, or telephone (925) 423-3893. Our e-mail address is str-mail@llnl.gov. S&TR is available on the Web at str.llnl.gov.

  13. Measurement Uncertainties in Science and Technology

    CERN Document Server

    Grabe, Michael

    2005-01-01

    At the turn of the 19th century, Carl Friedrich Gauß founded error calculus by predicting the then unknown position of the planet Ceres. Ever since, error calculus has occupied a place at the heart of science. In this book, Grabe illustrates the breakdown of traditional error calculus in the face of modern measurement techniques. Revising Gauß’ error calculus ab initio, he treats random and unknown systematic errors on an equal footing from the outset. Furthermore, Grabe also proposes what may be called well defined measuring conditions, a prerequisite for defining confidence intervals that are consistent with basic statistical concepts. The resulting measurement uncertainties are as robust and reliable as required by modern-day science, engineering and technology.

  14. A new direction in mathematics for materials science

    CERN Document Server

    Ikeda, Susumu

    2015-01-01

    This book is the first volume of the SpringerBriefs in the Mathematics of Materials and provides a comprehensive guide to the interaction of mathematics with materials science. The anterior part of the book describes a selected history of materials science as well as the interaction between mathematics and materials in history. The emergence of materials science was itself a result of an interdisciplinary movement in the 1950s and 1960s. Materials science was formed by the integration of metallurgy, polymer science, ceramics, solid state physics, and related disciplines. We believe that such historical background helps readers to understand the importance of interdisciplinary interaction such as mathematics–materials science collaboration. The middle part of the book describes mathematical ideas and methods that can be applied to materials problems and introduces some examples of specific studies—for example, computational homology applied to structural analysis of glassy materials, stochastic models for ...

  15. Microgravity: A Teacher's Guide with Activities in Science, Mathematics, and Technology

    Science.gov (United States)

    Rogers, Melissa J.B.; Vogt, Gregory L.; Wargo, Michael J.

    1997-01-01

    Microgravity is the subject of this teacher's guide. This publication identifies the underlying mathematics, physics, and technology principles that apply to microgravity. The topics included in this publication are: 1) Microgravity Science Primer; 2) The Microgravity Environment of Orbiting Spacecraft; 3) Biotechnology; 4) Combustion Science; 5) Fluid Physics; 6) Fundamental Physics; and 7) Materials Science; 8) Microgravity Research and Exploration; and 9) Microgravity Science Space Flights. This publication also contains a glossary of selected terms.

  16. Science & Technology Review January/February 2007

    Energy Technology Data Exchange (ETDEWEB)

    Radousky, H B

    2006-12-01

    This month's issue has the following articles: (1) Another Step for High-Energy-Density Science and Teller's Legacy--Commentary by George H. Miller. (2) Titan Leads the Way in Laser-Matter Science--Livermore's Titan laser combines long- and short-pulse lasers to explore high-energy-density science. (3) Identifying the Source of Stolen Nuclear Materials--Nuclear forensic scientists are using advanced techniques to discover the exact nature of interdicted radiological and nuclear materials, their age and origin, and where legitimate control was lost. (4) Tiny Tubes Make the Flow Go--Membranes made up of billions of tiny carbon tubes 50,000 times slimmer than a human hair allow liquids and gases to flow through at astonishingly fast speeds. (5) Acidic Microbe Community Fosters the Unique--In an abandoned mine, where the pH can be even lower than zero, communities of acidophilic microbes produce hundreds of unusual proteins.

  17. Advances in nuclear science and technology

    CERN Document Server

    Henley, Ernest J

    1975-01-01

    Advances in Nuclear Science and Technology, Volume 8 discusses the development of nuclear power in several countries throughout the world. This book discusses the world's largest program of land-based electricity production in the United States.Organized into six chapters, this volume begins with an overview of the phenomenon of quasi-exponential behavior by examining two mathematical models of the neutron field. This text then discusses the finite element method, which is a method for obtaining approximate solutions to integral or differential equations. Other chapters consider the status of

  18. Advances in nuclear science and technology

    CERN Document Server

    Greebler, Paul

    1966-01-01

    Advances in Nuclear Science and Technology, Volume 3 provides an authoritative, complete, coherent, and critical review of the nuclear industry. This book presents the advances in the atomic energy field.Organized into six chapters, this volume begins with an overview of the use of pulsed neutron sources for the determination of the thermalization and diffusion properties of moderating as well as multiplying media. This text then examines the effect of nuclear radiation on electronic circuitry and its components. Other chapters consider radiation effects in various inorganic solids, with empha

  19. Advances in nuclear science and technology

    CERN Document Server

    Henley, Ernest J

    1970-01-01

    Advances in Nuclear Science and Technology, Volume 5 presents the underlying principles and theory, as well as the practical applications of the advances in the nuclear field. This book reviews the specialized applications to such fields as space propulsion.Organized into six chapters, this volume begins with an overview of the design and objective of the Fast Flux Test Facility to provide fast flux irradiation testing facilities. This text then examines the problem in the design of nuclear reactors, which is the analysis of the spatial and temporal behavior of the neutron and temperature dist

  20. Advances in nuclear science and technology

    CERN Document Server

    Henley, Ernest J

    1962-01-01

    Advances in Nuclear Science and Technology, Volume 1 provides an authoritative, complete, coherent, and critical review of the nuclear industry. This book covers a variety of topics, including nuclear power stations, graft polymerization, diffusion in uranium alloys, and conventional power plants.Organized into seven chapters, this volume begins with an overview of the three stages of the operation of a power plant, either nuclear or conventionally fueled. This text then examines the major problems that face the successful development of commercial nuclear power plants. Other chapters consider

  1. The nuclear materials control technology briefing book

    Energy Technology Data Exchange (ETDEWEB)

    Hartwell, J.K.; Fernandez, S.J.

    1992-03-01

    As national and international interests in nuclear arms control and non-proliferation of nuclear weapons, intensify, it becomes ever more important that contributors be aware of the technologies available for the measurement and control of the nuclear materials important to nuclear weapons development. This briefing book presents concise, nontechnical summaries of various special nuclear material (SNM) and tritium production monitoring technologies applicable to the control of nuclear materials and their production. Since the International Atomic Energy Agency (IAEA) operates a multinational, on-site-inspector-based safeguards program in support of the Treaty on the Non-Proliferation of Nuclear Weapons (NPT), many (but not all) of the technologies reported in this document are in routine use or under development for IAEA safeguards.

  2. Neutron scattering science at the Australian Nuclear Science and Technology Organisation (ANSTO)

    Energy Technology Data Exchange (ETDEWEB)

    Knott, Robert [Australian Nuclear Science and Technology Organisation (Australia)

    2000-10-01

    Neutron scattering science at ANSTO is integrated into a number of fields in the Australian scientific and industrial research communities. The unique properties of the neutron are being used to investigate problems in chemistry, materials science, physics, engineering and biology. The reactor HIFAR at the Australian Nuclear Science and Technology Organisation research laboratories is the only neutron source in Australia suitable for neutron scattering science. A suite of instruments provides a range of opportunities for the neutron scattering community that extends throughout universities, government and industrial research laboratories. Plans to replace the present research reactor with a modern multi-purpose research reactor are well advanced. The experimental and analysis equipment associated with a modern research reactor will permit the establishment of a national centre for world class neutron science research focussed on the structure and functioning of materials, industrial irradiations and analyses in support of Australian manufacturing, minerals, petrochemical, pharmaceuticals and information science industries. A brief overview will be presented of all the instruments presently available at ANSTO with emphasis on the SANS instrument. This will be followed by a description of the replacement research reactor and its instruments. (author)

  3. Gender Equity in Materials Science and Engineering

    Energy Technology Data Exchange (ETDEWEB)

    Angus Rockett

    2008-12-01

    At the request of the University Materials Council, a national workshop was convened to examine 'Gender Equity Issues in Materials Science and Engineering.' The workshop considered causes of the historic underrepresentation of women in materials science and engineering (MSE), with a goal of developing strategies to increase the gender diversity of the discipline in universities and national laboratories. Specific workshop objectives were to examine efforts to level the playing field, understand implicit biases, develop methods to minimize bias in all aspects of training and employment, and create the means to implement a broadly inclusive, family-friendly work environment in MSE departments. Held May 18-20, 2008, at the Conference Center at the University of Maryland, the workshop included heads and chairs of university MSE departments and representatives of the National Science Foundation (NSF), the Office of Basic Energy Sciences of the Department of Energy (DOE-BES), and the national laboratories. The following recommendations are made based on the outcomes of the discussions at the workshop. Many or all of these apply equally well to universities and national laboratories and should be considered in context of industrial environments as well. First, there should be a follow-up process by which the University Materials Council (UMC) reviews the status of women in the field of MSE on a periodic basis and determines what additional changes should be made to accelerate progress in gender equity. Second, all departments should strengthen documentation and enforcement of departmental procedures such that hiring, promotion, compensation, and tenure decisions are more transparent, that the reasons why a candidate was not selected or promoted are clear, and that faculty are less able to apply their biases to personnel decisions. Third, all departments should strengthen mentoring of junior faculty. Fourth, all departments must raise awareness of gender biases

  4. Technologies Advance UAVs for Science, Military

    Science.gov (United States)

    2010-01-01

    A Space Act Agreement with Goddard Space Flight Center and West Virginia University enabled Aurora Flight Sciences Corporation, of Manassas, Virginia, to develop cost-effective composite manufacturing capabilities and open a facility in West Virginia. The company now employs 160 workers at the plant, tasked with crafting airframe components for the Global Hawk unmanned aerial vehicle (UAV) program. While one third of the company's workforce focuses on Global Hawk production, the rest of the company develops advanced UAV technologies that are redefining traditional approaches to unmanned aviation. Since the company's founding, Aurora s cutting-edge work has been supported with funding from NASA's Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) programs.

  5. 1998 report on results of R and D project for industrial science and technology (R and D for technologies of producing innovative high performance material) (development of technologies for structural control material). R and D for high stimuli-responsive material; 1998 nendo dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (kozo seigyo zairyo gijutsu kaihatsu) kodo shigeki oto zairyo no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A report was made on the results of 1998 R and D concerning high stimuli-responsive materials. This R and D was intended to develop technologies for producing, by copying organism, innovative new stocks and new materials which repeatedly provide functions such as separating, transmitting and moving in response to stimuli. In the R and D of polymeric high stimuli-responsive materials, studies were conducted on multi-stimuli-responsive separation materials, molecular recognition controlled separation materials, and cell adhesion/separation materials with molecular recognition function. In the R and D of composite high stimuli-responsive materials, release controlled function materials and materials for actuator were studied. The investigation and research of common basic technologies were carried out on such subjects as synthesis and functional development of multi-signal responded polymer gels, development of temperature-responsive chromatography, synthesis and characterization of novel stimuli-sensitive materials, studies on structural characterization of intelligent gels, novel thermosensitive polymers, polyelectrolytic model networks, etc. (NEDO)

  6. Semiconductor Nanowires from Materials Science and Device Physics Perspectives

    Science.gov (United States)

    Samuelson, Lars

    2005-03-01

    Realization of extremely down-scaled devices gives tough challenges related to technology and materials science. One reason for the concern is that top-down fabricated nano-devices tend to have their properties dominated by process-induced damage, rendering ultra-small devices not so useful. Alternatively, bottom-up fabrication methods may allow dimensions on the scale even below 10 nm, still with superb device properties. I will in this talk describe our research on catalytically induced growth of semiconductor nanowires. Our method uses catalytic gold nanoparticles, allowing tight control of diameter as well as position of where the nanowire grows, with our work completely focused on epitaxially nucleated nanowires in which the nanowire structure can be seen as a coherent, monolithic extension of the crystalline substrate material. One of the most important achievements in this field of research is the realization of atomically abrupt heterostructures within nanowires, in which the material composition can be altered within only one or a few monolayers, thus allowing 1D heterostructure devices to be realized. This has allowed a variety of quantum devices to be realized, such as single-electron transistors, resonant tunneling devices as well as memory storage devices. A related recent field of progress has been the realization of ideally nucleated III-V nanowires on Si substrates, cases where we have also reported functioning III-V heterostructure device structures on Si. All of these device related challenges evolve from an improved understanding of the materials science involved in nucleation of nanowires, in altering of composition of the growing nanowire, in control of the growth direction etc. I will give examples of these materials science issues and will especially dwell on the opportunities to form new kinds of materials, e.g. as 3D complex nanowire structures, resembling nanotrees or nanoforests.

  7. Diamond detector - material science, design and application

    Science.gov (United States)

    Gaowei, Mengjia

    Modern synchrotrons, such as the NSLS-II, will enable unprecedented science by having extremely high brightness and flux with exceptional beam stability. These capabilities create a harsh and demanding environment for measuring the characteristics of the x-ray beam. In many cases, existing measurement techniques fail completely, requiring the development of new detectors which can meet the demands of the synchrotron. The combination of diamond properties ranked diamond an appealing candidate in the field of radiation detection in extreme conditions and it has been used as x-ray sensor material for decades. However, only until the development of chemical vapor deposition (CVD) process in the synthesis of diamond that has it been considered for wider applications in the state-of-art synchrotron light sources as part of beamline diagnostics, including the detection of x-ray beam flux and position. While defects and dislocations in CVD grown single crystal diamonds are inevitable, there are solutions in other aspects of a device fabrication to compensate this technological downside, including improving device performance in engineering diamond surface electrode materials and patterns and slicing and polishing diamond plates into thinner pieces. The content of this dissertation summarizes our effort in addressing several problems we encounter in the process of design and fabrication of single crystal CVD diamond based electronic devices. In order to study the generation of post-anneal photoconductive gain in our devices we have discussed in section 3 and 4 the two criteria for the observation of photoconductive current. In section 3 we reveal the correlation between structural defects in diamond and the post-anneal photoconductive regions. Section 4 introduces the measurements of hard x-ray photoelectron spectroscopy (HAXPES) we applied to investigate the diamond-metal Schottky barrier height for several metals and diamond surface terminations. The position of the

  8. Inorganic and Metallic Nanotubular Materials Recent Technologies and Applications

    CERN Document Server

    Kijima, Tsuyoshi

    2010-01-01

    This book describes the synthesis, characterization and applications of inorganic and metallic nanotubular materials. It cover a wide variety of nanotubular materials excluding carbon nanotubes, ranging from metal oxides, sulfides and nitrides such as titanium oxide, tungsten sulfide, and boron nitride, as well as platinum and other noble-metals to unique nanotubes consisting of water, graphene or fullerene. Based on their structural and compositional characteristics, these nanotubular materials are of importance for their potential applications in electronic devices, photocatalysts, dye-sensitized solar cells, nanothermometers, electrodes for fuel cells and batteries, sensors, and reinforcing fillers for plastics, among others. Such materials are also having a great impact on future developments, including renewable-energy sources as well as highly efficient energy-conversion and energy-saving technologies. This book will be of particular interest to experts in the fields of nanotechnology, material science ...

  9. Monitoring science and technology for competitive advantage

    Energy Technology Data Exchange (ETDEWEB)

    Ashton, W.B.; Johnson, A. [Pacific Northwest Lab., Richland, WA (United States); Stacey, G. [Battelle, Geneva (Switzerland)

    1994-08-01

    In this age of rapid technological innovation, firms that do not stay abreast of the latest advancements in science and technology (S&T) stand a greater chance of missing opportunities than firms that maintain vigilance over the ever-changing technical environment. As a result, a resurgence of interest in technical intelligence for business is occurring in companies around the globe. Many firms now have formal technical intelligence programs to gather, analyze and use S&T information to watch their competitors, to track emerging trends in technological development and to anticipate significant technology-based changes in key markets. Careful management of technical information that affects a business can have a vital influence on corporate profitability and long term health. This paper describes the main features of technical intelligence operations in business, drawing on the experience of several companies that develop and use intelligence information. The steps of gathering, analyzing, evaluating and using information for business decisions are described and examples are given to illustrate how intelligence concepts are implemented in firms from several different industries. Practical issues such as understanding user needs, ethical data collection, effective analysis methods and using intelligence results are covered in the paper.

  10. Soviet satellite communications science and technology

    Energy Technology Data Exchange (ETDEWEB)

    Birch, J.N.; Campanella, S.J.; Gordon, G.D.; McElroy, D.R.; Pritchard, W.L.; Stamminger, R.

    1991-08-01

    This is a report by six US scientists and engineers concerning the current state of the art and projections of future Soviet satellite communications technologies. The panel members are experts in satellite stabilization, spacecraft environments, space power generation, launch systems, spacecraft communications sciences and technologies, onboard processing, ground stations, and other technologies that impact communications. The panel assessed the Soviet ability to support high-data-rate space missions at 128 Mbps by evaluating current and projected Soviet satellite communications technologies. A variety of space missions were considered, including Earth-to-Earth communications via satellites in geostationary or highly elliptical orbits, those missions that require space-to-Earth communications via a direct path and those missions that require space-to-Earth communications via a relay satellite. Soviet satellite communications capability, in most cases, is 10 years behind that of the United States and other industrialized nations. However, based upon an analysis of communications links needed to support these missions using current Soviet capabilities, it is well within the current Soviet technology to support certain space missions outlined above at rates of 128 Mbps or higher, although published literature clearly shows that the Soviet Union has not exceeded 60 Mbps in its current space system. These analyses are necessary but not sufficient to determine mission data rates, and other technologies such as onboard processing and storage could limit the mission data rate well below that which could actually be supported via the communications links. Presently, the Soviet Union appears to be content with data rates in the low-Earth-orbit relay via geostationary mode of 12 Mbps. This limit is a direct result of power amplifier limits, spacecraft antenna size, and the utilization of K{sub u}-band frequencies. 91 refs., 16 figs., 15 tabs.

  11. Transitioning Unmanned Technologies for Earth Science Applications

    Science.gov (United States)

    Wardell, L. J.; Douglas, J.

    2008-12-01

    Development of small unmanned aerial systems (UAS) has progressed dramatically in recent years along with miniaturization of sensor technology. This confluence of development paths has resulted in greater capability in smaller, less expensive platforms allowing research to be performed where manned airborne platforms are impractical or dangerous. Recent applications include small UAS for studies involving hurricanes, volcanic activity, sea ice changes, glacier melt, biological monitoring of land and sea species, wildfire monitoring, and others. However, the majority of UAS employed in these investigations were originally developed for non-civilian applications and many of the required interfaces are locked behind proprietary specifications, requiring expensive customization by the manufacturer to transform a military UAS into one suitable for civilian work. A small UAS for scientific research should be standards-based, low-cost, user friendly, field serviceable, and be designed to accept a range of payloads. The AV8R UAS is one example of an unmanned system that has been developed for specific application to earth observation missions. This system is designed to be operated by the user with difficult environmental conditions and field logistics in mind. Numerous features and innovations that advance this technology as a research tool as well as its planned science missions will be presented. Most importantly, all interfaces to the system required for successful design and integration of various payloads will be openly available. The environment of open, standards based development allow the small technologies companies that serve as the backbone for much of the technology development to participate in the rapid development of industry capabilities. This is particularly true with UAS technologies. Programs within the USA such as the STTR foster collaborations with small businesses and university researchers. Other innovations related to autonomous unmanned systems

  12. Rapid Prototyping: Technologies, Materials and Advances

    Directory of Open Access Journals (Sweden)

    Dudek P.

    2016-06-01

    Full Text Available In the context of product development, the term rapid prototyping (RP is widely used to describe technologies which create physical prototypes directly from digital data. Recently, this technology has become one of the fastest-growing methods of manufacturing parts. The paper provides brief notes on the creation of composites using RP methods, such as stereolithography, selective laser sintering or melting, laminated object modelling, fused deposition modelling or three-dimensional printing. The emphasis of this work is on the methodology of composite fabrication and the variety of materials used in these technologies.

  13. Living in a Materials World: Materials Science Engineering Professional Development for K-12 Educators

    Energy Technology Data Exchange (ETDEWEB)

    Anne Seifert; Louis Nadelson

    2011-06-01

    Advances in materials science are fundamental to technological developments and have broad societal impacs. For example, a cellular phone is composed of a polymer case, liquid crystal displays, LEDs, silicon chips, Ni-Cd batteries, resistors, capacitors, speakers, microphones all of which have required advances in materials science to be compacted into a phone which is typically smaller than a deck of cards. Like many technological developments, cellular phones have become a ubiquitous part of society, and yet most people know little about the materials science associated with their manufacture. The probable condition of constrained knowledge of materials science was the motivation for developing and offering a 20 hour fourday course called 'Living in a Materials World.' In addition, materials science provides a connection between our every day experiences and the work of scientists and engineers. The course was offered as part of a larger K-12 teacher professional development project and was a component of a week-long summer institute designed specifically for upper elementary and middle school teachers which included 20 hour content strands, and 12 hours of plenary sessions, planning, and collaborative sharing. The focus of the institute was on enhancing teacher content knowledge in STEM, their capacity for teaching using inquiry, their comfort and positive attitudes toward teaching STEM, their knowledge of how people learn, and strategies for integrating STEM throughout the curriculum. In addition to the summer institute the participating teachers were provided with a kit of about $300 worth of materials and equipment to use to implement the content they learned in their classrooms. As part of this professional development project the participants were required to design and implement 5 lesson plans with their students this fall and report on the results, as part of the continuing education course associated with the project. 'Living in a

  14. Polyoxometalates: from inorganic chemistry to materials science.

    Science.gov (United States)

    Casañ-Pastor, Nieves; Gómez-Romero, Pedro

    2004-05-01

    Polyoxometalates have been traditionally the subject of study of molecular inorganic chemistry. Yet, these polynuclear molecules, reminiscent of oxide clusters, present a wide range of structures and with them ideal frameworks for the deployment of a plethora of useful magnetic, electroionic, catalytic, bioactive and photochemical properties. With this in mind, a new trend towards the application of these remarkable species in materials science is beginning to develop. In this review we analyze this trend and discuss two main lines of thought for the application of polyoxometalates as materials. On the one hand, there is their use as clusters with inherently useful properties on themselves, a line which has produced fundamental studies of their magnetic, electronic or photoelectrochemical properties and has shown these clusters as models for quantum-sized oxides. On the other hand, the encapsulation or integration of polyoxometalates into organic, polymeric or inorganic matrices or substrates opens a whole new field within the area of hybrid materials for harnessing the multifunctional properties of these versatile species in a wide variety of applications, ranging from catalysis to energy storage to biomedicine.

  15. Assessing nano cellulose developments using science and technology indicators

    Energy Technology Data Exchange (ETDEWEB)

    Milanez, Douglas Henrique; Amaral, Roniberto Morato do; Faria, Leandro Innocentini Lopes de; Gregolin, Jose Angelo Rodrigues, E-mail: douglasmilanez@yahoo.com.br [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Nucleo de Informacao Tecnologica em Materiais. Dept. de Engenharia de Materiais

    2013-11-01

    This research aims to examine scientific and technological trends of developments in nano cellulose based on scientometric and patent indicators obtained from the Science Citation Index and Derwent Innovations Index in 2001-2010. The overall nano cellulose activity indicators were compared to nanotechnology and other selected nano materials. Scientific and technological future developments in nano cellulose were forecasted using extrapolation growth curves and the main countries were also mapped. The results showed that nano cellulose publications and patent documents have increased rapidly over the last five years with an average growth rate higher than that of nanotechnology and fullerene. The USA, Japan, France, Sweden and Finland all played a significant role in nano cellulose development and the extrapolation growth curves suggested that nano cellulose scientific and technological activities are still emerging. Finally, the evidence from this study recommends monitoring nano cellulose S and T advances in the coming years. (author)

  16. Science & Technology Review July/August 2008

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2008-05-27

    This months issue has the following articles: (1) Science Translated for the Greater Good--Commentary by Steven D. Liedle; (2) The New Face of Industrial Partnerships--An entrepreneurial spirit is blossoming at Lawrence Livermore; (3) Monitoring a Nuclear Weapon from the Inside--Livermore researchers are developing tiny sensors to warn of detrimental chemical and physical changes inside nuclear warheads; (4) Simulating the Biomolecular Structure of Nanometer-Size Particles--Grand Challenge simulations reveal the size and structure of nanolipoprotein particles used to study membrane proteins; and (5) Antineutrino Detectors Improve Reactor Safeguards--Antineutrino detectors track the consumption and production of fissile materials inside nuclear reactors.

  17. What Research Says: Implementing the Science-Technology-Society Theme in Science Education: Perceptions of Science Teachers.

    Science.gov (United States)

    Bybee, Rodger W.; Bonnstetter, Ronald J.

    1987-01-01

    A survey of science teachers was conducted to ascertain their perceptions of global problems, policy issues, and recommendations for curriculum and instruction related to the science-technology-society theme. The focus is on information on implementing the science-technology-society theme in school science programs. (MNS)

  18. The Efficacy of Educative Curriculum Materials to Support Geospatial Science Pedagogical Content Knowledge

    Science.gov (United States)

    Bodzin, Alec; Peffer, Tamara; Kulo, Violet

    2012-01-01

    Teaching and learning about geospatial aspects of energy resource issues requires that science teachers apply effective science pedagogical approaches to implement geospatial technologies into classroom instruction. To address this need, we designed educative curriculum materials as an integral part of a comprehensive middle school energy…

  19. Additive manufacturing of metals the technology, materials, design and production

    CERN Document Server

    Yang, Li; Baughman, Brian; Godfrey, Donald; Medina, Francisco; Menon, Mamballykalathil; Wiener, Soeren

    2017-01-01

    This book offers a unique guide to the three-dimensional (3D) printing of metals. It covers various aspects of additive, subtractive, and joining processes used to form three-dimensional parts with applications ranging from prototyping to production. Examining a variety of manufacturing technologies and their ability to produce both prototypes and functional production-quality parts, the individual chapters address metal components and discuss some of the important research challenges associated with the use of these technologies. As well as exploring the latest technologies currently under development, the book features unique sections on electron beam melting technology, material lifting, and the importance this science has in the engineering context. Presenting unique real-life case studies from industry, this book is also the first to offer the perspective of engineers who work in the field of aerospace and transportation systems, and who design components and manufacturing networks. Written by the leadin...

  20. Science and Technology Review December 2009

    Energy Technology Data Exchange (ETDEWEB)

    Bearinger, J P

    2009-11-17

    This month's issue has the following articles: (1) Advanced Materials for Our Past, Present, and Future - Commentary by Tomas Diaz de la Rubia; (2) A Defensive 'Coat' for Materials under Attack - Amorphous metal coatings provide the strength and corrosion resistance needed to protect military vessels and spent nuclear fuel containers; (3) Too Close for Comfort - Laboratory scientists are analyzing the feasibility of using nuclear explosives to disrupt or divert asteroids on a collision course with Earth; (4) Hyperion: A Titan of High-Performance Computing Systems - Livermore is collaborating with 10 computing industry leaders to create a test bed for Linux cluster hardware and software technologies; (5) Isolating Pathogens for Speedy Identification - An automated miniature device separates viruses, bacteria, genetic material, and proteins from nasal swabs and blood and urine samples for speedy identification.