WorldWideScience

Sample records for technology knowledge base

  1. Knowledge base technology: a developer view

    Directory of Open Access Journals (Sweden)

    G. Ginkul

    1996-09-01

    Full Text Available In present paper we have endeavoured to tell about some reasonings, conclusions and pricticals results, to which we have come being busy with one of most interesting problems of modern science. This paper is a brief report of the group of scientists from the Laboratory of Artificial Intelligence Systems about their experience of work in the field of knowledge engineering. The researches in this area was started in our Laboratory more than 10 years ago, i.e. about in the moment, when there was just another rise in Artificial Intelligence, caused by mass emerging of expert systems. The tasks of knowledge engineering were being varied, and focal point of our researches was being varied too. Certainly, we have not solved all the problems, originating in this area. Our knowledge still has an approximate nature, but nevertheless, the outcomes obtained by us seem rather important and interesting. So, we want to tell about our experience in building of knowledge-based systems, and expert systems, in particular.

  2. Development of a Knowledge Base for Incorporating Technology into Courses

    Science.gov (United States)

    Rath, Logan

    2013-01-01

    This article discusses a project resulting from the request of a group of faculty at The College at Brockport to create a website for best practices in teaching and technology. The project evolved into a knowledge base powered by WordPress. Installation and configuration of WordPress resulted in the creation of custom taxonomies and post types,…

  3. Research on knowledge support technology for product innovation design based on quality function knowledge deployment

    Directory of Open Access Journals (Sweden)

    Kai Zhang

    2016-06-01

    Full Text Available Based on the analysis of the relationship between the process of product innovation design and knowledge, this article proposes a theoretical model of quality function knowledge deployment. In order to link up the product innovation design and the knowledge required by the designer, the iterative method of quality function knowledge deployment is refined, as well as the knowledge retrieval model and knowledge support model based on quality function knowledge deployment are established. In the whole life cycle of product design, in view of the different requirements for knowledge in conceptual design stage, components’ configuration stage, process planning stage, and production planning stage, the quality function knowledge deployment model could link up the required knowledge with the engineering characteristics, component characteristics, process characteristics, and production characteristics in the four stages using the mapping relationship between the function characteristics and the knowledge and help the designer to track the required knowledge for realizing product innovation design. In this article, an instance about rewinding machine is given to demonstrate the practicability and validity of product innovation design knowledge support technology based on quality function knowledge deployment.

  4. Business Intelligence & Knowledge Management - Technological Support for Strategic Management in the Knowledge Based Economy

    Directory of Open Access Journals (Sweden)

    Dorel PARASCHIV

    2008-01-01

    Full Text Available The viability and success of modern enterprises are subject to the increasing dynamic of the economic environment, so they need to adjust rapidly their policies and strategies in order to respond to sophistication of competitors, customers and suppliers, globalization of business, international competition. Perhaps the most critical component for success of the modern enterprise is its ability to take advantage of all available information - both internal and external. Making sense of all this information, gaining value and competitive advantage through represents real challenges for the enterprise. The IT solutions designed to address these challenges have been developed in two different approaches: structured data management (Business Intelligence and unstructured content management (Knowledge Management. Integrating Business Intelligence and Knowledge Management in new software applications designated not only to store highly structured data and exploit it in real time but also to interpret the results and communicate them to decision factors provides real technological support for Strategic Management. Integrating Business Intelligence and Knowledge Management in order to respond to the challenges the modern enterprise has to deal with represents not only a "new trend" in IT, but a necessity in the emerging knowledge based economy. These hybrid technologies are already widely known in both scientific and practice communities as Competitive Intelligence. In the end of paper,a competitive datawarehouse design is proposed, in an attempt to apply business intelligence technologies to economic environment analysis making use of romanian public data sources.

  5. The Knowledge-Based Technology Applications Center (KBTAC) seminar series

    International Nuclear Information System (INIS)

    Isik, C.; Wood, R.M.

    1993-12-01

    Neural Networks are adaptive systems that allow users to model complex systems, classify patterns, filter data or control processes with little or no a-priori knowledge. Neural networks represent a branch of artificial intelligence technology. Fuzzy logic is a generalization of formalized mathematical logic that allows representation of uncertainty by providing a smooth transition from true to false, instead of a step change. It allows for a proposition to be both true and false, to different degrees at the same time. This allows representation of approximate reasoning concepts that occur frequently in everyday experience, such as ''somewhat true,'' or ''not very hot.'' To utilize these technologies, utility personnel need to acquire knowledge and skills in a number of areas: 1. basic principles of neural networks and fuzzy logic; 2. types of neural networks and fuzzy logic systems, their applications, and requirements for use; 3. considerations for designing neural networks and fuzzy logic systems; 4. software tools available for these technologies. Off-the-shelf software is available for a variety of hardware platforms to rapidly develop, tune and test neural networks and fuzzy logic systems. Familiarity with the problem to which a neural network or fuzzy logic system is applied allows the designer to develop an appropriate design. Therefore, it is desirable to teach neural network and fuzzy logic technology to utility experts in the domain of application

  6. An Analysis of Knowledge Sharing Approaches for Emerging-technology-based Strategic Alliances in Electronic Industry

    Institute of Scientific and Technical Information of China (English)

    LIU Ju; LI Yong-jian

    2006-01-01

    Emerging technologies are now initiating new industries and transforming old ones with tremendous power. They are different games compared with established technologies with distinctive characteristics of knowledge management in knowledge-based and technological-innovation-based competition. How to obtain knowledge advantage and enhance competences by knowledge sharing for emerging-technology-based strategic alliances (ETBSA) is what we concern in this paper. On the basis of our previous work on emerging technologies'distinctive attributes, we counter the wide spread presumption that the primary purpose of strategic alliances is knowledge acquiring by means of learning. We offers new insight into the knowledge sharing approaches of ETBSAs - the knowledge integrating approach by which each member firm integrates its partner's complementary knowledge base into the products and services and maintains its own knowledge specialization at the same time. So that ETBSAs should plan and practice their knowledge sharing strategies from the angle of knowledge integrating rather than knowledge acquiring. A four-dimensional framework is developed to analyze the advantages and disadvantages of these two knowledge sharing approaches. Some cases in electronic industry are introduced to illustrate our point of view.

  7. From Socialisation to Internalisation: Cultivating Technological Pedagogical Content Knowledge through Problem-Based Learning

    Science.gov (United States)

    Tee, Meng Yew; Lee, Shuh Shing

    2011-01-01

    Recent studies on technology have shifted from the emphasis on technology skills alone to integrating pedagogy and content with technology--what Mishra and Koehler (2005) call technological pedagogical content knowledge (TPACK). Deeper understanding on how TPACK can be cultivated is needed. This design-based research explored how an improvised,…

  8. KBTAC: EPRI's center to assist the nuclear industry to apply the knowledge-based technology

    International Nuclear Information System (INIS)

    Lin, Chinglu; Naser, J.A.; Sun, B.K.H.

    1993-01-01

    The nuclear utility industry's complex engineering and procedure systems offer many opportunities for use of the knowledge-based technology such as expert systems and neural networks. The ability of expert systems to enhance human experts makes them an important tool in the areas of engineering, operations and maintenance. However, many current industry applications are research projects or turnkey systems supplied by vendors. These often do not impart to utility technical staff a clear understanding of the capabilities of knowledge-based systems (KBS). More importantly, simply using completed applications does not meet utilities' need to acquire the capabilities to build their own knowledge-based systems. Thus, EPRI is supporting its member utilities utilization of knowledge-based technology for power plant engineering, operations, and maintenance applications through the establishment of the Knowledge-Based Technology Application Center (KBTAC)

  9. A new patented building technology based on ancient Roman knowledge

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl

    2010-01-01

    Super-light structures with pearl-chains is a new patented building technology by means of which you can build houses, bridges, tunnels, and even ships with longer spans, less material-, and energy consumption, without scaffolding, and making the use of arches, vaults, domes, ribbed shells, and new...

  10. The emergence of new technology-based industries: the case of fuel cells and its technological relatedness to regional knowledge bases

    DEFF Research Database (Denmark)

    Tanner, Anne Nygaard

    2016-01-01

    to emerging radical technologies that create the foundation for new industries. The article develops a new measure for technological relatedness between the knowledge base of a region and that of a radical technology based on patent classes. It demonstrates that emerging fuel cell technology develops where...... the regional knowledge base is technologically related to that of fuel cells and consequently confirms the evolutionary thesis.......Evolutionary economic geographers propose that regional diversification is a path-dependent process whereby industries grow out of pre-existing industrial structures through technologically related localised knowledge spillovers and learning. This article examines whether this also applies...

  11. KBTAC [Knowledge-Based Technology Application Center] - The EPRI [Electric Power Research Institute]-sponsored knowledge-based technology application center

    International Nuclear Information System (INIS)

    Meyer, W.; Wood, R.M.; Scherer, J.

    1990-01-01

    The Electric Power Research Institute (EPRI) has announced the establishment of the Knowledge-Based Technology Application Center (KBTAC), whose goal is to assist member utilities with expert system technology and applications. The center, established November 7, 1989, is located on the campus of Syracuse University, Syracuse, New York, and will be operated jointly by Kaman Sciences Corporation and the university. The mission of the KBTAC is to assist EPRI member utilities to develop, test, and transfer expert systems into nuclear power plant operations, maintenance, and administration

  12. Automation of the Work intensively based on Knowledge, a Challenge for the New Technologies

    Directory of Open Access Journals (Sweden)

    Vasile MAZILESCU

    2011-06-01

    Full Text Available Knowledge Management or knowledge-based management (noted and used throughout this paper as KM is defined as a collaborative practice, by which organizations deliberately and intelligibly create, organize, distribute and analyze their own knowledge, in terms of resources, documents and people’s skills. It is widely regarded as an internal tool for increasing the operational efficiency of any organization, and has the potential to revolutionize the intelligent interaction between humans and agents (intelligent, based on more and more advanced technology. Semantic Technologies (STs are distributed software technologies that make that meaning more explicit, principally so that it can be understood by computers. STs will dramatically impact enterprise architecture and the engineering of new system and infrastructure capabilities. They are tools that represent meanings, associations, theories, and know-how about the uses of things separately from data and knowledge, using reasoning algorithms. Time restrictions are not excessive in usual STs as distributed applications. Critical time reasoning problems may occur in case of faulty operations and overloading. At present, the reasoning depth developed for such system is still poor. This work represents research results for incorporating and considering appropriate semantic foundations in future technologies that can automate knowledge based work.

  13. Knowledge Based Artificial Augmentation Intelligence Technology: Next Step in Academic Instructional Tools for Distance Learning

    Science.gov (United States)

    Crowe, Dale; LaPierre, Martin; Kebritchi, Mansureh

    2017-01-01

    With augmented intelligence/knowledge based system (KBS) it is now possible to develop distance learning applications to support both curriculum and administrative tasks. Instructional designers and information technology (IT) professionals are now moving from the programmable systems era that started in the 1950s to the cognitive computing era.…

  14. Virtual Reality-Based Technologies in Dental Medicine: Knowledge, Attitudes and Practice among Students and Practitioners

    Science.gov (United States)

    Sabalic, Maja; Schoener, Jason D.

    2017-01-01

    Virtual reality-based technologies have been used in dentistry for almost two decades. Dental simulators, planning software and CAD/CAM (computer-aided design/computer-aided manufacturing) systems have significantly developed over the years and changed both dental education and clinical practice. This study aimed to assess the knowledge, attitudes…

  15. Orbital transfer vehicle launch operations study: Automated technology knowledge base, volume 4

    Science.gov (United States)

    1986-01-01

    A simplified retrieval strategy for compiling automation-related bibliographies from NASA/RECON is presented. Two subsets of NASA Thesaurus subject terms were extracted: a primary list, which is used to obtain an initial set of citations; and a secondary list, which is used to limit or further specify a large initial set of citations. These subject term lists are presented in Appendix A as the Automated Technology Knowledge Base (ATKB) Thesaurus.

  16. Technological Pedagogical Content Knowledge of Prospective Mathematics Teacher in Three Dimensional Material Based on Sex Differences

    Science.gov (United States)

    Aqib, M. A.; Budiarto, M. T.; Wijayanti, P.

    2018-01-01

    The effectiveness of learning in this era can be seen from 3 factors such as: technology, content, and pedagogy that covered in Technological Pedagogical Content Knowledge (TPCK). This research was a qualitative research which aimed to describe each domain from TPCK include Content Knowledge, Pedagogical Knowledge, Pedagogical Content Knowledge, Technological Knowledge, Technological Content Knowledge, Technological Pedagogical Knowledge and Technological, Pedagogical, and Content Knowledge. The subjects of this research were male and female mathematics college students at least 5th semester who has almost the same ability for some course like innovative learning, innovative learning II, school mathematics I, school mathematics II, computer applications and instructional media. Research began by spreading the questionnaire of subject then continued with the assignment and interview. The obtained data was validated by time triangulation.This research has result that male and female prospective teacher was relatively same for Content Knowledge and Pedagogical Knowledge domain. While it was difference in the Technological Knowledge domain. The difference in this domain certainly has an impact on other domains that has technology components on it. Although it can be minimized by familiarizing the technology.

  17. ADEpedia: a scalable and standardized knowledge base of Adverse Drug Events using semantic web technology.

    Science.gov (United States)

    Jiang, Guoqian; Solbrig, Harold R; Chute, Christopher G

    2011-01-01

    A source of semantically coded Adverse Drug Event (ADE) data can be useful for identifying common phenotypes related to ADEs. We proposed a comprehensive framework for building a standardized ADE knowledge base (called ADEpedia) through combining ontology-based approach with semantic web technology. The framework comprises four primary modules: 1) an XML2RDF transformation module; 2) a data normalization module based on NCBO Open Biomedical Annotator; 3) a RDF store based persistence module; and 4) a front-end module based on a Semantic Wiki for the review and curation. A prototype is successfully implemented to demonstrate the capability of the system to integrate multiple drug data and ontology resources and open web services for the ADE data standardization. A preliminary evaluation is performed to demonstrate the usefulness of the system, including the performance of the NCBO annotator. In conclusion, the semantic web technology provides a highly scalable framework for ADE data source integration and standard query service.

  18. Technology, Innovation and Knowledge

    DEFF Research Database (Denmark)

    Andersson, Ulf; Dasi, Angels; Mudambi, Ram

    2016-01-01

    The relevance of ideas is at the core of the IB field and has been captured in concepts like technology, innovation and knowledge. While these concepts have evolved over the last decades, the point that the ideas and the international connectivity are central for IB remains genuine. This paper...... is an attempt to take stock of the evolution of the concepts technology, innovation and knowledge in IB literature along the past five decades with a particular focus on the role of the Columbia Journal of World Business (CJWB) and the Journal of World Business (JWB) in this evolution. Likewise, our objective...

  19. A Study on the Evolution of Carbon Capture and Storage Technology Based on Knowledge Mapping

    Directory of Open Access Journals (Sweden)

    Hong-Hua Qiu

    2018-05-01

    Full Text Available As a useful technical measure to deal with the problem of carbon dioxide (CO2 emissions, carbon capture and storage (CCS technology has been highly regarded in both theory and practice under the promotion of the Intergovernmental Panel on Climate Change (IPCC. Knowledge mapping is helpful for understanding the evolution in terms of research topics and emerging trends in a specific domain. In this work knowledge mapping of CCS technology was investigated using CiteSpace. Several aspects of the outputs of publications in the CCS research area were analyzed, such as annual trends, countries, and institutions. The research topics in this particular technology area were analyzed based on their co-occurring keyword networks and co-citation literature networks, while, the emerging trends and research frontiers were studied through the analysis of burst keywords and citation bursts. The results indicated that the annual number of publications in the research field of CCS technology increased rapidly after 2005. There are more CCS studies published in countries from Asia, North America, and Europe, especially in the United States and China. The Chinese Academy of Sciences not only has the largest number of publications, but also has a greater impact on the research area of CCS technology, however, there are more productive institutions located in developed countries. In the research area of CCS technology, the main research topics include carbon emissions and environmental protection, research and development activities, and social practical issues, meanwhile, the main emerging trends include emerging techniques and processes, emerging materials, evaluation of technological performance, and socioeconomic analysis.

  20. Beliefs, acceptances and technological knowledge

    NARCIS (Netherlands)

    Vries, de M.J.; Meijers, A.W.M.; Vries, de M.J.; Hansson, S.O.; Meijers, A.W.M.

    2013-01-01

    One of the four ways of conceptualizing technology that Carl Mitcham distinguished in his book Thinking Through Technology is technology as knowledge. His description of technology as knowledge showed that not much philosophical literature on the nature of technological knowledge was available at

  1. Provision of assistive technology services method (ATSM) according to evidence-based information and knowledge management.

    Science.gov (United States)

    Elsaesser, Linda-Jeanne; Bauer, Stephen M

    2011-01-01

    PURPOSE. This article develops a standardised method for assistive technology service (ATS) provision and a logical basis for research to improve health care quality. The method is 'interoperable' across disabilities, disciplines, assistive technology devices and ATSs. BACKGROUND. Absence of a standardised and interoperable method for ATS provision results in ineffective communication between providers, manufacturers, researchers, policy-makers and individuals with disabilities (IWD), a fragmented service delivery system, inefficient resource allocation and sub-optimal outcomes. OBJECTIVES. Synthesise a standardised, interoperable AT service method (ATSM) fully consistent with key guidelines, systems, models and Federal legislation. Express the ATSM using common and unambiguous language. RESULTS. Guidelines, systems, models and Federal legislation relevant to ATS provision are reviewed. These include the RESNA Guidelines for Knowledge and Skills for Provision of Assistive Technology Products and Services (RESNA Guidelines), IMPACT2 model, international classification of functioning, disability and health (ICF) and AT device classification (ATDC). Federal legislation includes the Assistive Technology Act of 2004, Americans with Disabilities Act of 2008 and Social Security Act. Based on these findings, the ATSM is synthesised and translated into common and accessible language. CONCLUSION. ATSM usage will improve communication between stakeholders, service delivery coherence, resource allocation and intervention outcomes.

  2. How Technology Teachers Understand Technological Knowledge

    Science.gov (United States)

    Norström, Per

    2014-01-01

    Swedish technology teachers' views of technological knowledge are examined through a written survey and a series of interviews. The study indicates that technology teachers' understandings of what constitutes technological knowledge and how it is justified vary considerably. The philosophical discussions on the topic are unknown to them. This lack…

  3. Towards an Understanding of Information Technology Strategy Development Based on Knowledge Management

    Directory of Open Access Journals (Sweden)

    Paulo Henrique de Souza Bermejo

    2014-12-01

    Full Text Available http://dx.doi.org/10.5007/2175-8077.2014v16n40p139 The formulation of IT strategies is increasingly seen as a collaborative process, where knowledge management (KM and learning become central to building a shared view of how information technology (IT can support and extend business strategies. This article presents three interrelated components that support the application of KM to IT strategy development (actors and types of knowledge, knowledge conversion modes, and technological tools and artifacts. Through a longitudinal, qualitative case study, we illustrate strategies for applying these components. Faced with the importance of knowledge and collaboration to IT strategies, the results provide recommendations so that organizations can apply concepts and practices of KM processes in formulating IT strategies.

  4. Current Technologies Based on the Knowledge of the Stem Cells Microenvironments.

    Science.gov (United States)

    Mawad, Damia; Figtree, Gemma; Gentile, Carmine

    2017-01-01

    The stem cell microenvironment or niche plays a critical role in the regulation of survival, differentiation and behavior of stem cells and their progenies. Recapitulating each aspect of the stem cell niche is therefore essential for their optimal use in in vitro studies and in vivo as future therapeutics in humans. Engineering of optimal conditions for three-dimensional stem cell culture includes multiple transient and dynamic physiological stimuli, such as blood flow and tissue stiffness. Bioprinting and microfluidics technologies, including organs-on-a-chip, are among the most recent approaches utilized to replicate the three-dimensional stem cell niche for human tissue fabrication that allow the integration of multiple levels of tissue complexity, including blood flow. This chapter focuses on the physico-chemical and genetic cues utilized to engineer the stem cell niche and provides an overview on how both bioprinting and microfluidics technologies are improving our knowledge in this field for both disease modeling and tissue regeneration, including drug discovery and toxicity high-throughput assays and stem cell-based therapies in humans.

  5. Tracing Technological Development Trajectories: A Genetic Knowledge Persistence-Based Main Path Approach.

    Directory of Open Access Journals (Sweden)

    Hyunseok Park

    Full Text Available The aim of this paper is to propose a new method to identify main paths in a technological domain using patent citations. Previous approaches for using main path analysis have greatly improved our understanding of actual technological trajectories but nonetheless have some limitations. They have high potential to miss some dominant patents from the identified main paths; nonetheless, the high network complexity of their main paths makes qualitative tracing of trajectories problematic. The proposed method searches backward and forward paths from the high-persistence patents which are identified based on a standard genetic knowledge persistence algorithm. We tested the new method by applying it to the desalination and the solar photovoltaic domains and compared the results to output from the same domains using a prior method. The empirical results show that the proposed method can dramatically reduce network complexity without missing any dominantly important patents. The main paths identified by our approach for two test cases are almost 10x less complex than the main paths identified by the existing approach. The proposed approach identifies all dominantly important patents on the main paths, but the main paths identified by the existing approach miss about 20% of dominantly important patents.

  6. Information Technology Security Professionals' Knowledge and Use Intention Based on UTAUT Model

    Science.gov (United States)

    Kassa, Woldeloul

    2016-01-01

    Information technology (IT) security threats and vulnerabilities have become a major concern for organizations in the United States. However, there has been little research on assessing the effect of IT security professionals' knowledge on the use of IT security controls. This study examined the unified theory of acceptance and use of technology…

  7. Development and management of the knowledge base for the geological disposal technology. Annual report 2006

    International Nuclear Information System (INIS)

    Umeda, Koji; Oyama, Takuya; Kurosawa, Hideki; Semba, Takeshi; Takeuchi, Shinji; Tajikara, Masayoshi; Tsuruta, Tadahiko; Yasue, Ken-ichi; Ohi, Takao; Oda, Chie; Kamei, Gento; Kobayashi, Yasushi; Sasaki, Yasuo; Sawada, Atsushi; Taniguchi, Naoki; Tanai, Kenji; Naito, Morimasa; Nakayama, Masashi; Kuno, Yoshio; Fujita, Tomoo; Honda, Akira; Mihara, Morihiro; Miyahara, Kaname; Osawa, Hideaki; Fujishima, Atsushi; Kuji, Masayoshi; Saito, Haruo; Sanada, Hiroyuki; Niizato, Tadafumi; Funaki, Hironori; Maekawa, Keisuke; Fujiwara, Kenso

    2007-12-01

    To increase technical reliability in geological disposal technology of high-level radioactive waste, JAEA have been conducting R and D activities in the fields in the repository engineering, performance assessment (PA) of the geological disposal system, and geoscientific study. In the field of R and D on the repository engineering, laboratory experimental studies at Tokai Research Center are carried out by engineering-scale and non-radiogenic experiments. The studies on performance assessment include more realistic model development with extensive computer analyses and acquisition of basic data concerning the chemical properties and migration behavior of radionuclides under geological disposal conditions. The information obtained from the Underground Research Laboratories (URLs) is used to provide a realistic condition of geological environments for these studies. The R and D studies are also carried out for TRU waste. A particular JAEA R and D activity is to promote the projects of two Underground Research Laboratories (URLs): one at Mizunami city, in crystalline rock and the other at Horonobe town, in sedimentary rock. In the present stage (2nd R and D phase) of the URL projects, the investigation are being carried out during the excavation of shafts and drifts. Data obtained from the investigations will serve to verify and refine the results from the surface-based investigations and characterize the evolution of the geological environment during drift excavation. The research on natural processes, such as fault and volcanic activities, is also conducted to provide better understanding of long-term stability on the geological environment. JAEA has initiated a project to develop the next generation of novel knowledge management system (KMS) to develop and manage the technical knowledge base for supporting implementers and regulators. This knowledge base includes all technical achievements by the JAEA as well as know-how and experience which have been accumulated

  8. Knowledge-based renewable energy and environmental technology and services.; En kunnskapsbasert fornybar energi- og miljoenaering

    Energy Technology Data Exchange (ETDEWEB)

    Gruenfeld, Leo A.; Espelien, Anne

    2011-07-01

    This report presents a study of the Norwegian industry for renewable energy and environmental technology and services (abbreviated to the REETS-industry). The study is a part of the large research program 'A Knowledge based Norway' organized by the Norwegian School of Management. It is one of 14 industry studies that investigates how knowledge investments and knowledge management contributes to strengthen clusters of industrial activity in Norway. A primary research question in this report concerns whether the Norwegian REETS-industry has sufficient resources and cluster strengths to succeed in international markets and stay competitive over time. For the first time, we present statistics covering all firms in the REETS-industry in Norway. The report contains a thorough mapping of industry activities, in terms of turnover, value added, growth, access to financial capital and human capital, internationalization and last but not least cluster properties in the industry as well as its links to other industries in Norway and abroad. The industry consists of approximately 2200 companies with a total turnover of Nok 151 bn in 2009. Industry value added has grown by 15 percent per year over the last decade and reached Nok 60 bn in 2009. The REETS-industry is now the eighth largest industry in Norway.The REETS-industry contains a large variety of activities and technologies. Consequently, we have divided the industry into four main groups and 11 sub-segments. The main groups are: renewable energy production, environmental technology and services, waste and recycling and finally energy distribution and sales. Since activities are highly heterogeneous, knowledge activities and cluster configurations must be studied at a more detailed level. Norway is a European giant in terms of hydro power production, producing close to 20 percent of such energy in Europe. In Norway, this part of the industry provides 35 percent of the revenues. Consequently, we devote

  9. THE BOTS EXPERTS BASED ON THE PROCEDURAL KNOWLEDGE CREATION INFORMATION TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Володимир Олександрович ТІМОФЄЄВ

    2017-03-01

    Full Text Available Now the world web answers the questions "who?", "what?", "where?" and "when?" fast and completely. But not the question "how?", especially "how to settle emergency situation?” (which refers to procedural knowledge usually, private user’s advice from various forums is employed as the response. And this is despite the real boom of bots - programs that mimic human action through the Internet interfaces and of the so-called chatbots, that are the programs to provide answers within individual sites. The differences in knowledge representation forms make it impossible to use existing chatbot creation information technologies for dissemination the procedural knowledge in the bot-experts form via Internet. For the problem solution, the original information technology is offered. The article is addressed to IT-specialists, experts in various areas and to heads of the enterprises to use for creating the Internet consulting business or to solve organizational problems in an existing business.

  10. A Case-Based Exploration of Task/Technology Fit in a Knowledge Management Context

    Science.gov (United States)

    2008-03-01

    have a difficult time articulating to others. Researchers who subscribe to the constructionist perspective view knowledge as an inherently social ...Acceptance Model With Task-Technology Fit Constructs. Information & Management, 36, 9-21. Dooley, D. (2001). Social Research Methods (4th ed.). Upper...L. (2006). Social Research Methods : Qualitative and Quantitative Approaches (6 ed.). Boston: Pearson Education, Inc. Nonaka, I. (1994). A Dynamic

  11. Knowledge management technologies

    Science.gov (United States)

    2000-08-01

    This report presents recommendations for technologies that have potential to contribute to future development and management of Kansas Department of Transportation (KDOT) information systems. The recommendations are accomplished by examples of design...

  12. Knowledge base technology for CT-DIMS: Report 1. [CT-DIMS (Cutting Tool - Database and Information Management System)

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, E.E.

    1993-05-01

    This report discusses progress on the Cutting Tool-Database and Information Management System (CT-DIMS) project being conducted by the University of Illinois Urbana-Champaign (UIUC) under contract to the Department of Energy. This project was initiated in October 1991 by UIUC. The Knowledge-Based Engineering Systems Research Laboratory (KBESRL) at UIUC is developing knowledge base technology and prototype software for the presentation and manipulation of the cutting tool databases at Allied-Signal Inc., Kansas City Division (KCD). The graphical tool selection capability being developed for CT-DIMS in the Intelligent Design Environment for Engineering Automation (IDEEA) will provide a concurrent environment for simultaneous access to tool databases, tool standard libraries, and cutting tool knowledge.

  13. Knowledge in health technology assessment

    DEFF Research Database (Denmark)

    Tjørnhøj-Thomsen, Tine; Hansen, Helle Ploug

    2011-01-01

    Health systems are placing more and more emphasis on designing and delivering services that are focused on the patient, and there is a growing interest in patient aspects of health policy research and health technology assessment (HTA). Only a few HTA agencies use and invest in scientific methods...... to generate knowledge and evidence about the patient aspects of a given technology. This raises questions about how knowledge is produced in HTA reports and what kind of knowledge is considered relevant. This article uses a Danish HTA on patient education from 2009 as empirical material for a critical...

  14. Indigenous knowledges driving technological innovation

    Science.gov (United States)

    Lilian Alessa; Carlos Andrade; Phil Cash Cash; Christian P. Giardina; Matt Hamabata; Craig Hammer; Kai Henifin; Lee Joachim; Jay T. Johnson; Kekuhi Kealiikanakaoleohaililani; Deanna Kingston; Andrew Kliskey; Renee Pualani Louis; Amanda Lynch; Daryn McKenny; Chels Marshall; Mere Roberts; Taupouri Tangaro; Jyl Wheaton-Abraham; Everett. Wingert

    2011-01-01

    This policy brief explores the use and expands the conversation on the ability of geospatial technologies to represent Indigenous cultural knowledge. Indigenous peoples' use of geospatial technologies has already proven to be a critical step for protecting tribal self-determination. However, the ontological frameworks and techniques of Western geospatial...

  15. Knowledge base mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Suwa, M; Furukawa, K; Makinouchi, A; Mizoguchi, T; Mizoguchi, F; Yamasaki, H

    1982-01-01

    One of the principal goals of the Fifth Generation Computer System Project for the coming decade is to develop a methodology for building knowledge information processing systems which will provide people with intelligent agents. The key notion of the fifth generation computer system is knowledge used for problem solving. In this paper the authors describe the plan of Randd on knowledge base mechanisms. A knowledge representation system is to be designed to support knowledge acquisition for the knowledge information processing systems. The system will include a knowledge representation language, a knowledge base editor and a debugger. It is also expected to perform as a kind of meta-inference system. In order to develop the large scale knowledge base systems, a knowledge base mechanism based on the relational model is to be studied in the earlier stage of the project. Distributed problem solving is also one of the main issues of the project. 19 references.

  16. Engineering and technology talent for innovation and knowledge-based economies competencies, leadership, and a roadmap for implementation

    CERN Document Server

    Abdulwahed, Mahmoud

    2017-01-01

    This book introduces and analyzes the models for engineering leadership and competency skills, as well as frameworks for industry-academia collaboration and is appropriate for students, researchers, and professionals interested in continuous professional development. The authors look at the organizational structures of engineering education in knowledge-based economies and examine the role of innovation and how it is encouraged in schools. It also provides a methodological framework and toolkit for investigating the needs of engineering and technology skills in national contexts. A detailed empirical case study is included that examines the leadership competencies that are needed in knowledge-based economies and how one university encourages these in their program. The book concludes with conceptual modeling and proposals of specific organizational structures for implementation in engineering schools, in order to enable the development of necessary skills for future engineering graduates.

  17. MARKETING AND INNOVATION IN ENVIRONMENT BANKING FINANCIAL - REQUIREMENTS IN A KNOWLEDGE-BASED SOCIETY AND TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    MIRCEA VALERIA ARINA

    2015-04-01

    Full Text Available In the context of knowledge-based economy and society has acquired a connotation marketing role vital for all fields. Evolution of social, cultural, political and economic, information, design and conduct of marketing activities contribute to increasing the efficiency of any institution. Evolution of marketing over time provoked the great researchers who have tried to define the concept of their views, but only surprising aspects of this vast and important field. The definitions are different as shown in the article approach, the essence is the same. In the banking and financial role of marketing is to continually improve the quality of customer services and products offered by formulating appropriate marketing strategies so as to be able to influence The consumer buying behavior. Customer focus, his loyalty and not least an innovative marketing that starts at the client key aspects FEATURES today. The emphasis on innovation and ingenuity in order to: create new banking services and products, ways to attract customers; loyalty of existing ones, defining marketing and communication strategies lead to appropriate strategies to maximize the results of innovative marketing campaigns. Referring to work in the banking environment we can say that innovation is the key to success BANK and are based on: product and service innovations, process innovations, organizational innovations, and not least of marketing innovations.

  18. Surveying In-Service Teachers' Beliefs about Game-Based Learning and Perceptions of Technological Pedagogical and Content Knowledge of Games

    Science.gov (United States)

    Hsu, Chung-Yuan; Tsai, Meng-Jung; Chang, Yu-Hsuan; Liang, Jyh-Chong

    2017-01-01

    Using the Game-based-learning Teaching Belief Scale (GTBS) and the Technological Pedagogical Content Knowledge--Games questionnaire (TPACK-G), this study investigated 316 Taiwanese in-service teachers' teaching beliefs about game-based learning and their perceptions of game-based pedagogical content knowledge (GPCK). Both t-tests and ANOVA…

  19. Using web-based technology to deliver scientific knowledge: the Southern Forest Encyclopedia Network.

    Science.gov (United States)

    John M. Pye; H. Michael Rauscher; Deborah K. Kennard; Patricia A. Flebbe; J. Bryan Jordin; William G. Hubbard; Cynthia Fowler; James. Ward

    2007-01-01

    Forest science, like any science, is a continuous process of discovering new knowledge, reevaluating existing knowledge, and revising our theories and management practices in light of these changes. The forest science community has not yet found the solution to the problem of getting continuously changing science efficiently and effectively into the hands of those who...

  20. Eliciting teachers' technological pedagogical knowledge

    NARCIS (Netherlands)

    Heitink, M.; Voogt, J.; Fisser, P.; Verplanken, L.; Braak, J.

    2017-01-01

    This paper starts from the understanding that teachers' knowledge is situated, grounded in knowledge derived from formal training and from experiences in practice. Based on this understanding we examine teachers' reasoning in relation to the pedagogical choices teachers make while using ICT in

  1. Leveraging on Information Technology to Teach Construction Law to Built Environment Students: A Knowledge-Based System (KBS Approach

    Directory of Open Access Journals (Sweden)

    Faisal Manzoor Arain

    2009-11-01

    Full Text Available Construction law is a vital component of the body of knowledge that is needed by construction professionals in order to successfully operate in the commercial world of construction. Construction law plays an important role in shaping building projects. Construction projects are complex because they involve many human and non-human factors and variables. Teaching construction law is therefore a complex issue with several dimensions. In recent years, Information Technology (IT has become strongly established as a supporting tool for many professions, including teachers. If faculty members have a knowledge base established on similar past projects, it would assist the faculty members to present case studies and contractually based scenarios to students. This paper proposes potential utilisation of a Knowledge-based System (KBS for teaching construction law to built environment students. The KBS is primarily designed for building professionals to learn from similar past projects. The KBS is able to assist professionals by providing accurate and timelyinformation for decision making and a user-friendly tool for analysing and selecting the suggested controls for variations in educational buildings. It is recommended that the wealth of knowledge available in the KBS can be very helpful in teaching construction law to built environment students. The system presents real case studies and scenarios to students to allow them to analyse and learn construction law. The KBS could be useful to students as a general research tool because the students could populate it with their own data and use it with the reported educational projects. With further generic modifications, the KBS will also be useful for built environment students to learn about project management of building projects; thus, it will raise the overall level of professional understanding, and eventually productivity, in the construction industry.

  2. Monitoring Knowledge Base (MKB)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Monitoring Knowledge Base (MKB) is a compilation of emissions measurement and monitoring techniques associated with air pollution control devices, industrial...

  3. Knowledge Based Economy Assessment

    OpenAIRE

    Madalina Cristina Tocan

    2012-01-01

    The importance of knowledge-based economy (KBE) in the XXI century is evident. In the article the reflection of knowledge on economy is analyzed. The main point is targeted to the analysis of characteristics of knowledge expression in economy and to the construction of structure of KBE expression. This allows understanding the mechanism of functioning of knowledge economy. The authors highlight the possibility to assess the penetration level of KBE which could manifest itself trough the exist...

  4. Building a knowledge base of severe adverse drug events based on AERS reporting data using semantic web technologies.

    Science.gov (United States)

    Jiang, Guoqian; Wang, Liwei; Liu, Hongfang; Solbrig, Harold R; Chute, Christopher G

    2013-01-01

    A semantically coded knowledge base of adverse drug events (ADEs) with severity information is critical for clinical decision support systems and translational research applications. However it remains challenging to measure and identify the severity information of ADEs. The objective of the study is to develop and evaluate a semantic web based approach for building a knowledge base of severe ADEs based on the FDA Adverse Event Reporting System (AERS) reporting data. We utilized a normalized AERS reporting dataset and extracted putative drug-ADE pairs and their associated outcome codes in the domain of cardiac disorders. We validated the drug-ADE associations using ADE datasets from SIDe Effect Resource (SIDER) and the UMLS. We leveraged the Common Terminology Criteria for Adverse Event (CTCAE) grading system and classified the ADEs into the CTCAE in the Web Ontology Language (OWL). We identified and validated 2,444 unique Drug-ADE pairs in the domain of cardiac disorders, of which 760 pairs are in Grade 5, 775 pairs in Grade 4 and 2,196 pairs in Grade 3.

  5. Application of knowledge based systems technology to the management of accidental spills

    International Nuclear Information System (INIS)

    Ouzilleau, F.; Serodes, J.-B.

    1992-01-01

    The AIDA personal computer based expert system has been developed to assist electric utility personnel in the case of a hydrocarbon chemical spill in a transformer yard. The types of accidents which could result in such a spill are described, and the role of expert systems in managing such an accident is explained. The stages of conceptual analysis and computer implementation of the AIDA expert system are then reviewed. To date, the AIDA system includes more than 600 rules and procedures which refer to over 450 variables or different facts. The architecture of the system is composed of four distinct rule bases, each associated with one of four stages of problem resolution (determination of the possible flow paths of pollutant if no action is taken, visual reconnaissance, selection and prioritization of locations where intervention should occur, and determination of the means of intervention appropriate for each location). Uniform procedures for reading of data and output of results allow each rule base to operate independently and only to recover the information that each requires. The AIDA man-machine interface is designed to allow the user to visualize the propagation of the pollutant in the environment, the management of the spill, and the necessary or useful information for understanding the reasoning behind the recommendations proposed by the expert system. 7 refs., 3 figs

  6. Introduction. Information, knowledge and technology.

    Science.gov (United States)

    MacFarlane, Alistair G J

    2003-08-15

    Technology is the sum of the ways in which social groups manipulate order in the world to achieve their ends. It enables our active engagement with the world. Technology is central to our present well-being and vital for our future survival. As such it needs a coherent world view, a conceptual framework which will enable the fundamental problems that it poses for society to be approached in an illuminating way. Furthermore, such an approach, while remaining convincing, must not be overwhelmed by an ever-increasing welter of specialization and diversity of application. It is the purpose of the set of papers presented here to examine some key aspects of such a conceptual framework; not in the sense of offering a fully worked out philosophy of technology--that would be a huge and complex undertaking--but rather by considering some key topics. Subsidiary aims are to survey important relevant areas, to identify key sources that can provide access points for further study, and to consider some possible future developments. Major, coherent domains of activity are characterized by a few, fundamental, extensively used and essentially unifying concepts. Technology is such a domain, and its fundamental concepts are information, knowledge and agency. The following sections give a synoptic overview of the material presented in this theme issue, and set it within a wider context.

  7. Knowledge management based organizations

    Directory of Open Access Journals (Sweden)

    Manev Gjorgji

    2015-01-01

    Full Text Available Accomplishment of the goals set by a business organization implies implementation of knowledge management. It allows coordination of the working processes with the information technologies, with a view to adapting the organization's operations to the problems encountered. Overcoming these problems involves designing and implementation of complex business systems supported by information technology. This can be achieved by management that will monitor the business processes through clear indicators, with the purpose of accomplishing the preset strategic goals. This managerial staff must be fully devoted and committed to their work, to learning and creation of expertise that will help overcome the competition challenges.

  8. Knowledge-based utility

    International Nuclear Information System (INIS)

    Chwalowski, M.

    1997-01-01

    This presentation provides industry examples of successful marketing practices by companies facing deregulation and competition. The common thread through the examples is that long term survival of today's utility structure is dependent on the strategic role of knowledge. As opposed to regulated monopolies which usually own huge physical assets and have very little intelligence about their customers, unregulated enterprises tend to be knowledge-based, characterized by higher market value than book value. A knowledge-based enterprise gathers data, creates information and develops knowledge by leveraging it as a competitive weapon. It institutionalizes human knowledge as a corporate asset for use over and over again by the use of databases, computer networks, patents, billing, collection and customer services (BCCS), branded interfaces and management capabilities. Activities to become knowledge-based such as replacing inventory/fixed assets with information about material usage to reduce expenditure and achieve more efficient operations, and by focusing on integration and value-adding delivery capabilities, were reviewed

  9. Technological Pedagogical Content Knowledge - a review of the literature

    NARCIS (Netherlands)

    Voogt, Joke; Fisser, Petra; Pareja Roblin, N.N.; Tondeur, J.; van Braak, J.

    2013-01-01

    Technological Pedagogical Content Knowledge (TPACK) has been introduced as a conceptual framework for the knowledge base teachers need to effectively teach with technology. The framework stems from the notion that technology integration in a specific educational context benefits from a careful

  10. Technological Pedagogical Content Knowledge -- A Review of the Literature

    Science.gov (United States)

    Voogt, J.; Fisser, P.; Roblin, N. Pareja; Tondeur, J.; van Braak, J.

    2013-01-01

    Technological Pedagogical Content Knowledge (TPACK) has been introduced as a conceptual framework for the knowledge base teachers need to effectively teach with technology. The framework stems from the notion that technology integration in a specific educational context benefits from a careful alignment of content, pedagogy and the potential of…

  11. Knowledge based maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Sturm, A [Hamburgische Electacitaets-Werke AG Hamburg (Germany)

    1998-12-31

    The establishment of maintenance strategies is of crucial significance for the reliability of a plant and the economic efficiency of maintenance measures. Knowledge about the condition of components and plants from the technical and business management point of view therefore becomes one of the fundamental questions and the key to efficient management and maintenance. A new way to determine the maintenance strategy can be called: Knowledge Based Maintenance. A simple method for determining strategies while taking the technical condition of the components of the production process into account to the greatest possible degree which can be shown. A software with an algorithm for Knowledge Based Maintenance leads the user during complex work to the determination of maintenance strategies for this complex plant components. (orig.)

  12. Knowledge based maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Sturm, A. [Hamburgische Electacitaets-Werke AG Hamburg (Germany)

    1997-12-31

    The establishment of maintenance strategies is of crucial significance for the reliability of a plant and the economic efficiency of maintenance measures. Knowledge about the condition of components and plants from the technical and business management point of view therefore becomes one of the fundamental questions and the key to efficient management and maintenance. A new way to determine the maintenance strategy can be called: Knowledge Based Maintenance. A simple method for determining strategies while taking the technical condition of the components of the production process into account to the greatest possible degree which can be shown. A software with an algorithm for Knowledge Based Maintenance leads the user during complex work to the determination of maintenance strategies for this complex plant components. (orig.)

  13. One knowledge base or many knowledge pools?

    DEFF Research Database (Denmark)

    Lundvall, Bengt-Åke

    It is increasingly realized that knowledge is the most important resource and that learning is the most important process in the economy. Sometimes this is expressed by coining the current era as characterised by a ‘knowledge based economy'. But this concept might be misleading by indicating...... that there is one common knowledge base on which economic activities can be built. In this paper we argue that it is more appropriate to see the economy as connecting to different ‘pools of knowledge'. The argument is built upon a conceptual framework where we make distinctions between private/public, local....../global, individual/collective and tacit/codified knowledge. The purpose is both ‘academic' and practical. Our analysis demonstrates the limits of a narrowly economic perspective on knowledge and we show that these distinctions have important implications both for innovation policy and for management of innovation....

  14. Knowledge based Entrepreneurship

    DEFF Research Database (Denmark)

    Heebøll, John

    This book is dedicated enterprising people with a technical or a scientific background who consider commercializing ideas and inventions within their field of expertise via a new business activity or a new company. It aims at distilling experiences from many successful and not so successful start......-up ventures from the Technical University of Denmark, 1988 – 2008 into practical, portable knowledge that can be used by future knowledge-based entrepreneurs to set up new companies efficiently or to stay away from it; to do what’s needed and avoid the pitfalls....

  15. Examination of engineering design teacher self-efficacy and knowledge base in secondary technology education and engineering-related courses

    Science.gov (United States)

    Vessel, Kanika Nicole

    2011-12-01

    There is an increasing demand for individuals with engineering education and skills of varying fields in everyday life. With the proper education students of high-needs schools can help meet the demand for a highly skilled and educated workforce. Researchers have assumed the supply and demand has not been met within the engineering workforce as a result of students' collegiate educational experiences, which are impacted by experiences in K-12 education. Although factors outside of the classroom contribute to the inability of universities to meet the increasing demand for the engineering workforce, most noted by researchers is the academic unpreparedness of freshman engineering students. The unpreparedness of entering freshman engineering students is a result of K-12 classroom experiences. This draws attention not only to the quality and competence of teachers present in the K-12 classroom, but the type of engineering instruction these students are receiving. This paper was an effort to systematically address one of the more direct and immediate factors impacting freshman engineering candidates, the quality of secondary engineering educators. Engineers develop new ideas using the engineering design process, which is taught at the collegiate level, and has been argued to be the best approach to teach technological literacy to all K-12 students. However, it is of importance to investigate whether technology educators have the knowledge and understanding of engineering design, how to transfer that knowledge in the classroom to students through instructional strategies, and their perception of their ability to do that. Therefore, the purpose of this study is to show the need for examining the degree to which technology and non-technology educators are implementing elements of engineering design in the curriculum.

  16. Management's knowledge of information technology

    NARCIS (Netherlands)

    Boersma, SKT; Stegwee, RA; Barta, BZ; Tatnall, A; Juliff, P

    1997-01-01

    Information Technology (IT) has always been the playground of technical specialists. In this paper we argue no changes in this respect, but rather that the management of an organisation becomes aware of what the technical specialists are actually doing. This cannot be achieved by teaching tomorrow's

  17. Using information technology to support knowledge conversion processes

    Directory of Open Access Journals (Sweden)

    2001-01-01

    Full Text Available One of the main roles of Information Technology in Knowledge Management programs is to accelerate the speed of knowledge transfer and creation. The Knowledge Management tools intend to help the processes of collecting and organizing the knowledge of groups of individuals in order to make this knowledge available in a shared base. Due to the largeness of the concept of knowledge, the software market for Knowledge Management seems to be quite confusing. Technology vendors are developing different implementations of the Knowledge Management concepts in their software products. Because of the variety and quantity of Knowledge Management tools available on the market, a typology may be a valuable aid to organizations that are looking for answers to specific needs. The objective of this article is to present guidelines that help to design such a typology. Knowledge Management solutions such as intranet systems, Electronic Document Management (EDM, groupware, workflow, artificial intelligence-based systems, Business Intelligence (BI, knowledge map systems, innovation support, competitive intelligence tools and knowledge portals are discussed in terms of their potential contributions to the processes of creating, registering and sharing knowledge. A number of Knowledge Management tools (Lotus Notes, Microsoft Exchange, Business Objects, Aris Toolset, File Net, Gingo, Vigipro, Sopheon have been checked. The potential of each category of solutions to support the transfer of tacit and/or explicit knowledge and to facilitate the knowledge conversion spiral in the sense of Nonaka and Takeuchi (1995 is discussed.

  18. ACCOUNTING AS BRANCH OF KNOWLEDGE: SCIENCE, TECHNOLOGY AND PRACTICE

    OpenAIRE

    Farias, Manoel Raimundo Santana; Martins, Gilberto de Andrade

    2015-01-01

    The aim of this study was to characterize the accounting as branch of knowledge in three different fields: science, technology and practice. Through theoretical essay, we was argued that, although distinct, these fields interact, in that, as epistemology that justified the analysis here undertaken, the practical activities may be technology subject matter and that to be effective if based on one or more sciences. The difference between science and technology is given by the nature of knowledg...

  19. The knowledge base of journalism

    DEFF Research Database (Denmark)

    Svith, Flemming

    In this paper I propose the knowledge base as a fruitful way to apprehend journalism. With the claim that the majority of practice is anchored in knowledge – understood as 9 categories of rationales, forms and levels – this knowledge base appears as a contextual look at journalists’ knowledge......, and place. As an analytical framework, the knowledge base is limited to understand the practice of newspaper journalists, but, conversely, the knowledge base encompasses more general beginnings through the inclusion of overall structural relationships in the media and journalism and general theories...... on practice and knowledge. As the result of an abductive reasoning is a theory proposal, there is a need for more deductive approaches to test the validity of this knowledge base claim. It is thus relevant to investigate which rationales are included in the knowledge base of journalism, as the dimension does...

  20. Teacher Design Knowledge for Technology Enhanced Learning

    NARCIS (Netherlands)

    McKenney, Susan

    2014-01-01

    This presentation shares a framework for investigating the knowledge teachers need to be able to design technology-enhanced learning. Specific activities are undertaken to consider elements within the framework

  1. Knowledge Management in Health Technology SMEs.

    Science.gov (United States)

    Huusko, Juhamatti; Kuusisto-Niemi, Sirpa; Saranto, Kaija

    2017-01-01

    The purpose of this study was to examine knowledge management's (KM) role in small and medium-sized (SMEs) health technology enterprises, which employ fewer than 250 employees. In this study, KM is understood as the ability to achieve competitive advantage by utilizing management knowledge and making it profitable. The health technology enterprises use modern technology to resolve health-related issues. The research data was acquired from Finnish health technology SMEs. The questionnaire was sent to 140 enterprises, generating 25 responses, or a 17.9% response rate. According to the results, health technology enterprises have not adopted KM concepts, nor do they have the necessary resources to do so. SMEs' KM use is informal: information is transferred informally through human interaction, rather than through information systems. In the SMEs, KM is not perceived as important, although it is seen as associated with the enterprise's financial performance through the potential in making the knowledge profitable.

  2. Information technology, knowledge processes, and innovation success

    NARCIS (Netherlands)

    Song, X.M.; Zang, F.; Bij, van der J.D.; Weggeman, M.C.D.P.

    2001-01-01

    Despite the obvious linkage between information technologies (IT) and knowledge processes and the apparent strategic importance of both, little research has done to explicitly examine how, if at all, IT and knowledge processes affect firm outcomes. The purpose of this study is to bridge this

  3. Technological Knowledge and Reasoning in Finnish and Estonian Technology Education

    Science.gov (United States)

    Autio, Ossi; Soobik, Mart

    2017-01-01

    The main idea of this research was to find out if there is a relationship between students' undertakings within Craft and Technology education and their ability to understand technological concepts. Study participants' technological knowledge and reasoning was measured with a questionnaire regarding mechanical systems connected with simple…

  4. Knowledge and Technology Transfer (KTT) Activities Between Universities and Firms in Switzerland: The Main Facts: an empirical analysis based on firm-level data

    OpenAIRE

    Arvanitis, Spyridon; Kubli, Ursina; Sydow, Nora; Wörter, Martin

    2005-01-01

    This study is part of a large project aiming at the investigation of a) extent and b) economic relevance of knowledge and technology transfer (KTT) between science institutions (universities, universities of a pplied science and other public re search institutions) and private corporations. Under knowledge and technology transfer we understand very broadly any activities targeted at transferring knowledge an d technology that may help a company or a research institution – depending on the dir...

  5. Logically automorphically equivalent knowledge bases

    OpenAIRE

    Aladova, Elena; Plotkin, Tatjana

    2017-01-01

    Knowledge bases theory provide an important example of the field where applications of universal algebra and algebraic logic look very natural, and their interaction with practical problems arising in computer science might be very productive. In this paper we study the equivalence problem for knowledge bases. Our interest is to find out how the informational equivalence is related to the logical description of knowledge. Studying various equivalences of knowledge bases allows us to compare d...

  6. Competencies for Central American SMEs in the Knowledge-Based ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Knowledge-based economy not only affects well developed countries but ... to the information and communication technologies (ICT) related competencies, as technologies plays a key and growing role in managing knowledge and exchange.

  7. Current trends on knowledge-based systems

    CERN Document Server

    Valencia-García, Rafael

    2017-01-01

    This book presents innovative and high-quality research on the implementation of conceptual frameworks, strategies, techniques, methodologies, informatics platforms and models for developing advanced knowledge-based systems and their application in different fields, including Agriculture, Education, Automotive, Electrical Industry, Business Services, Food Manufacturing, Energy Services, Medicine and others. Knowledge-based technologies employ artificial intelligence methods to heuristically address problems that cannot be solved by means of formal techniques. These technologies draw on standard and novel approaches from various disciplines within Computer Science, including Knowledge Engineering, Natural Language Processing, Decision Support Systems, Artificial Intelligence, Databases, Software Engineering, etc. As a combination of different fields of Artificial Intelligence, the area of Knowledge-Based Systems applies knowledge representation, case-based reasoning, neural networks, Semantic Web and TICs used...

  8. Localized knowledge spillover and the emergence of new technology

    DEFF Research Database (Denmark)

    Tanner, Anne Nygaard

    2010-01-01

    For the past 20 years scholars have found support for the thesis that knowledge spills over in geographical and technological proximity to the source of knowledge creation. It is the objective of this paper to examine whether this understanding of LKS can contribute to a greater understanding...... of emerging technologies and their geographical distribution. The paper examines this by studying the emergence of a generic technology with a very complex knowledge base, namely the fuel cell (FC) technology. The analysis is carried out on an OECD dataset on regionalized PCT patent applications (OECD REGPAT......-related technology fields. These findings corroborate the usefulness of the theory on LKS in explaining elements of the emergence of new technologies. Moreover, the analysis sheds new light on regional development and diversification along new technological trajectory....

  9. Semantic Technologies for Nuclear Knowledge Modelling and Applications

    International Nuclear Information System (INIS)

    Beraha, D.; Gladyshev, M.

    2016-01-01

    Full text: The IAEA has been engaged in working with Member States to preserve and enhance nuclear knowledge, and in supporting wide dissemination of safety related technical and technological information enhancing nuclear safety. The knowledge organization systems (ontologies, taxonomies, thesauri, etc.) provide one of the means to model and structure a given knowledge domain. The significance of knowledge organization systems (KOS) has been greatly enhanced by the evolution of the semantic technologies, enabling machines to “understand” the concepts described in a KOS, and to use them in a variety of applications. Over recent years semantic technologies have emerged as efficient means to improve access to information and knowledge. The Semantic Web Standards play an important role in creating an infrastructure of interoperable data sources based on principles of Linked Data. The status of utilizing semantic technologies in the nuclear domain is shortly reviewed, noting that such technologies are in their early stage of adoption, and considering some aspects which are specific to nuclear knowledge management. Several areas are described where semantic technologies are already deployed, and other areas are indicated where applications based on semantic technologies will have a strong impact on nuclear knowledge management in the near future. (author

  10. Machine intelligence and knowledge bases

    Energy Technology Data Exchange (ETDEWEB)

    Furukawa, K

    1981-09-01

    The basic functions necessary in machine intelligence are a knowledge base and a logic programming language such as PROLOG using deductive reasoning. Recently inductive reasoning based on meta knowledge and default reasoning have been developed. The creative thought model of Lenit is reviewed and the concept of knowledge engineering is introduced. 17 references.

  11. Foundation: Transforming data bases into knowledge bases

    Science.gov (United States)

    Purves, R. B.; Carnes, James R.; Cutts, Dannie E.

    1987-01-01

    One approach to transforming information stored in relational data bases into knowledge based representations and back again is described. This system, called Foundation, allows knowledge bases to take advantage of vast amounts of pre-existing data. A benefit of this approach is inspection, and even population, of data bases through an intelligent knowledge-based front-end.

  12. Knowledge sifters in MDA technologies

    Science.gov (United States)

    Kravchenko, Yuri; Kursitys, Ilona; Bova, Victoria

    2018-05-01

    The article considers a new approach to efficient management of information processes on the basis of object models. With the help of special design tools, a generic and application-independent application model is created, and then the program is implemented in a specific development environment. At the same time, the development process is completely based on a model that must contain all the information necessary for programming. The presence of a detailed model provides the automatic creation of typical parts of the application, the development of which is amenable to automation.

  13. Knowledge Based Health

    OpenAIRE

    Sasson, Amir

    2011-01-01

    In this study, we assess the underlying properties of a global knowledge hub to examine the extent to which the Norwegian health industry constitutes such a hub. We begin with a general discussion of the industry before we examine the underlying properties of global knowledge hubs: cluster attractiveness, educational attractiveness, talent attractiveness, R&D and innovation attractiveness, ownership attractiveness, environmental attractiveness and cluster dynamics. We conclude by providin...

  14. Knowledge-based Telecom Industry

    OpenAIRE

    Vinje, Villeman; Nordkvelde, Marius

    2011-01-01

    BI Norwegian School of Management is conducting a national research project entitled “A knowledge-based Norway”. Thirteen major knowledge-based industries in Norway are being analyzed under the auspices of the project. This study assesses the underlying properties of a global knowledge hub to examine the extent to which the Norwegian telecom industry – which encompasses all telecom firms located in Norway regardless of ownership – constitutes a global knowledge hub. It commences with a ge...

  15. Understanding the Essence of the OutcomesBased Education (OBE and Knowledge of its Implementation in a Technological University in the Philippines

    Directory of Open Access Journals (Sweden)

    Marie Fe D. De Guzman

    2017-11-01

    Full Text Available The paper offers discussions of the result of adoption of Outcomes-Based Education (OBEby the Ramon Magsaysay Technological University (RMTU, Zambales most especially on the aspect ascertaining the extent of understanding of the essence of OBE and the knowledge of OBE implementation. The study was conducted during the first semester of 2015 among the 272 faculty members. The research is descriptive and quantitative. Using the weighted mean, it was found out that the faculty members manifest a great extent of understanding of outcomes-based education primarily the active participation of students in the learning activities, however, faculty members’ perception indicated a moderate extent of understanding on the minor role played by the educators in the teaching-learning situation and planning activities that focus around the learners. The faculty members reported a great extent of knowledge of the outcomes-based education mainly the use of different techniques to assess student learning, though there is a moderate extent of knowledge on curriculum alignment and mapping and construction of Program Educational Objectives (PEOs of the different Colleges. The areas of the outcomes-based instruction which were proposed to be offered for faculty development were seminars and trainings in the syllabus preparation-OBE format, on the utilization of student-centered strategies and on curriculum mapping.

  16. A dialogue between archive, knowledge and technology

    Directory of Open Access Journals (Sweden)

    Henrique Machado dos Santos

    2015-11-01

    Full Text Available Objective. Perform a brief reflection on knowledge management in archives, emphasizing the connections necessary for a dialogue between archive, knowledge and technology. Method. It consists in review of material previously published in the areas of Management Science, Archival Science and Information Science. The sources consulted consist of books, theses, texts on websites and scientific journal articles indexed in Google Scholar. Thus, the collected data is analyzed qualitatively. Results. There is a close relationship between the archive, knowledge and technology. In this sense, the document has the role of interlocutor in this dialogue. The interdisciplinary scenario envisioned, enhance existing rapprochement between the archival practices and knowledge management, in order to make possible a feedback cycle that will support the practices related to the management, either, of knowledge, of information or of documents. Conclusions. There is need for further studies to address the potential of the archives in order to fill possible gaps theory thus reach multiple looks more points interdisciplinary convergence. Finally, there is the informational potential of archives, then mediated by technology information, can enrich the knowledge management practices, and for this it is essential to strengthen the interdisciplinary relationships between Management Science, Archival Science and Information Science.

  17. Exchanging Description Logic Knowledge Bases

    NARCIS (Netherlands)

    Arenas, M.; Botoeva, E.; Calvanese, D.; Ryzhikov, V.; Sherkhonov, E.

    2012-01-01

    In this paper, we study the problem of exchanging knowledge between a source and a target knowledge base (KB), connected through mappings. Differently from the traditional database exchange setting, which considers only the exchange of data, we are interested in exchanging implicit knowledge. As

  18. Clinicians' Knowledge and Perception of Telemedicine Technology.

    Science.gov (United States)

    Ayatollahi, Haleh; Sarabi, Fatemeh Zahra Pourfard; Langarizadeh, Mostafa

    2015-01-01

    Telemedicine is an application of information and communication technology in the healthcare environment. This study aimed to compare knowledge and perceptions of telemedicine technology among different groups of clinicians. This survey study was conducted in 2013. The potential participants included 532 clinicians who worked in two hospitals and three clinics in a northern province of Iran. Data were collected using a five-point Likert-scale questionnaire. The content validity of the questionnaire was checked, and the reliability was calculated using Cronbach's alpha coefficient (α = 0.73). The results showed that most of the clinicians (96.1 percent) had little knowledge about telemedicine. They perceived the advantages of telemedicine at a moderate level and its disadvantages at a low level. The knowledge of dentists about this technology was less than that of other groups, and as a result they were less positive about the advantages of telemedicine compared to nurses, general physicians, and specialists. The limited knowledge of clinicians about telemedicine seems to have influenced their perceptions of the technology. Therefore, providing healthcare professionals with more information about new technologies in healthcare, such as telemedicine, can help to gain a more realistic picture of their perceptions.

  19. Quantifying characteristics of information-technology applications based on expert knowledge for detection of oestrus and mastitis in dairy cows.

    Science.gov (United States)

    van Asseldonk, M A; Huirne, R B; Dijkhuizen, A A

    1998-10-09

    Expert opinions were elicited about the characteristics at the commercial-farm level of on-line information technology (IT) applications that are able to detect oestrus and mastitis in dairy cows. Since actual data of these characteristics are not available, judgmental data provided an alternative means to interpret the implications of research results for commercial farms. Applications included were activity measurement, milk-production measurement, electrical conductivity of quarter milk, automated concentrate feeders and milk-temperature measurement. Sensitivity and specificity of detection of oestrus (OD), clinical-mastitis (CMD) and subclinical-mastitis (SCMD) were ascertained. Conjoint-analysis was used to assess the effect of each application indirectly by decomposing the evaluated overall detection characteristics of a predefined number of IT combinations. The individual experts were consistent in evaluating the alternatives, but there was variation in estimates among experts. Estimations of the main effects of the applications and important first-order interactions were incorporated into the detection models. Implementation of all applications under study resulted in overall sensitivities and specificities of 82% and 90%, 73% and 87%, 58% and 82% for OD, CMD and SCMD, respectively. Further research is necessary that should take into account costs and benefits of the different detection systems based on the current status of farm performance (e.g. OD and mastitis incidence) and farm structure (e.g. farm size, years in operation of the milking parlour and parlour layout). Research to do this is currently in progress.

  20. Knowledge and cognitive process dimensions of Technology ...

    African Journals Online (AJOL)

    Further research is also needed on the reasons why low cognitive demands are made in the teaching of Technology. .... the NCS (Department of Basic Education, 2011), and the topics ..... In the quantitative phase each lesson objective was classified according .... involves the retrieving (listing) of knowledge from memory (at.

  1. Public's Knowledge of Science and Technology

    Science.gov (United States)

    Pew Research Center, 2013

    2013-01-01

    The public's knowledge of science and technology varies widely across a range of questions on current topics and basic scientific concepts, according to a new quiz by the Pew Research Center and "Smithsonian" magazine. About eight-in-ten Americans (83%) identify ultraviolet as the type of radiation that sunscreen protects against. Nearly…

  2. Enhancing knowledge sharing management using BIM technology in construction.

    Science.gov (United States)

    Ho, Shih-Ping; Tserng, Hui-Ping; Jan, Shu-Hui

    2013-01-01

    Construction knowledge can be communicated and reused among project managers and jobsite engineers to alleviate problems on a construction jobsite and reduce the time and cost of solving problems related to constructability. This paper proposes a new methodology for the sharing of construction knowledge by using Building Information Modeling (BIM) technology. The main characteristics of BIM include illustrating 3D CAD-based presentations and keeping information in a digital format and facilitation of easy updating and transfer of information in the BIM environment. Using the BIM technology, project managers and engineers can gain knowledge related to BIM and obtain feedback provided by jobsite engineers for future reference. This study addresses the application of knowledge sharing management using BIM technology and proposes a BIM-based Knowledge Sharing Management (BIMKSM) system for project managers and engineers. The BIMKSM system is then applied in a selected case study of a construction project in Taiwan to demonstrate the effectiveness of sharing knowledge in the BIM environment. The results demonstrate that the BIMKSM system can be used as a visual BIM-based knowledge sharing management platform by utilizing the BIM technology.

  3. Information technology to support informal knowledge sharing

    NARCIS (Netherlands)

    Davison, R.M.; Ou, C.X.J.; Martinsons, M.G.

    2013-01-01

    The knowledge management (KM) literature largely focuses on the explicit and formal representation of knowledge in computer-based KM systems. Informal KM practices are widespread, but less is known about them. This paper aims to redress this imbalance by exploring the use of interactive information

  4. Creative design inspired by biological knowledge: Technologies and methods

    Science.gov (United States)

    Tan, Runhua; Liu, Wei; Cao, Guozhong; Shi, Yuan

    2018-05-01

    Biological knowledge is becoming an important source of inspiration for developing creative solutions to engineering design problems and even has a huge potential in formulating ideas that can help firms compete successfully in a dynamic market. To identify the technologies and methods that can facilitate the development of biologically inspired creative designs, this research briefly reviews the existing biological-knowledge-based theories and methods and examines the application of biological-knowledge-inspired designs in various fields. Afterward, this research thoroughly examines the four dimensions of key technologies that underlie the biologically inspired design (BID) process. This research then discusses the future development trends of the BID process before presenting the conclusions.

  5. Fuzzy knowledge bases integration based on ontology

    OpenAIRE

    Ternovoy, Maksym; Shtogrina, Olena

    2012-01-01

    the paper describes the approach for fuzzy knowledge bases integration with the usage of ontology. This approach is based on metadata-base usage for integration of different knowledge bases with common ontology. The design process of metadata-base is described.

  6. Integrating technologies for effective knowledge management

    Energy Technology Data Exchange (ETDEWEB)

    Beaugrand, F.S.; Curtis, T.A. [Public Petroleum Data Model, PPDM Association, Calgary, AB (Canada)

    2002-06-01

    In order to succeed in today's business environment, effective knowledge management strategies are needed along with effective tools to solve real business problems. Relational databases provide accessible and practical tools that can be used to manage corporate knowledge assets. However, technology is growing so rapidly that it is difficult and too expensive for individual corporations to pursue each line of development independently. Collaborative efforts are needed to improve access to shared knowledge. The PPDM Association is an international not for profit standards body that is working collaboratively with the petroleum exploration and production industry to develop standards for managing data and knowledge, spatially enabling data, standardizing data content and data exchange. The PPDM Association provides a vendor-neutral environment for development, technical support and a methodology for designing, developing and publishing technical deliverables.

  7. Acquiring Knowledge in Learning Concepts from Electrical Circuits: The Use of Multiple Representations in Technology-Based Learning Environments

    Directory of Open Access Journals (Sweden)

    Abdeljalil Métioui

    2012-04-01

    Full Text Available The constructivists approach on the conception of relative software of modelling to training and teaching of the concepts of current and voltage requires appraisal of several disciplinary fields in order to provide to the learners a training adapted to their representations. Thus, this approach requires the researchers to have adequate knowledge or skills in data processing, didactics and science content. In this regard, several researches underline that the acquisition of basic concepts that span a field of a given knowledge, must take into account the student and the scientific representations. The present research appears in this perspective, and aims to present the interactive computer environments that take into account the students (secondary and college and scientific representations related to simple electric circuits. These computer environments will help the students to analyze the functions of the electric circuits adequately.

  8. Transforming Knowledge Creation: An Action Framework for Library Technology Diversity

    Directory of Open Access Journals (Sweden)

    Barbara I. Dewey

    2015-04-01

    Full Text Available This paper will articulate an action framework for library technology diversity consisting of five dimensions and based on the vision for knowledge creation, the academic library’s fundamental vision. The framework focuses on increasing diversity for library technology efforts based on the desire for transformation and inclusiveness within and across the dimensions. The dimensions are people, content and pedagogy, embeddedness and the global perspective, leadership, and the 5th dimension – bringing it all together.

  9. Emerging technologies for knowledge resource management

    CERN Document Server

    Pandian, M

    2007-01-01

    Emerging Technologies for Knowledge Resource Management examines various factors that contribute to an enabled environment for optimum utilisation of information resources. These include the digital form of information resources, which are inherently sharable, consortia as a concept to bring people and materials together and unified portals as technology to bring together disparate and heterogeneous resources for sharing and access. The book provides a step-by-step guideline for system analysis and requirements analysis. The book also provides reviews of existing portal models for sharing reso

  10. The Co-evolution of Internationalization and Technological Knowledge

    DEFF Research Database (Denmark)

    Geisler Asmussen, Christian; Hashai, Niron; Delios, Andrew

    2011-01-01

    but diminishing effect of technological knowledge on internationalization and vice versa. This relationship leads to equilibrium in the technological knowledge-internationalization space that dictates the patterns of technological and international evolution of MNEs. The model offers an integrative approach...

  11. Querying Natural Logic Knowledge Bases

    DEFF Research Database (Denmark)

    Andreasen, Troels; Bulskov, Henrik; Jensen, Per Anker

    2017-01-01

    This paper describes the principles of a system applying natural logic as a knowledge base language. Natural logics are regimented fragments of natural language employing high level inference rules. We advocate the use of natural logic for knowledge bases dealing with querying of classes...... in ontologies and class-relationships such as are common in life-science descriptions. The paper adopts a version of natural logic with recursive restrictive clauses such as relative clauses and adnominal prepositional phrases. It includes passive as well as active voice sentences. We outline a prototype...... for partial translation of natural language into natural logic, featuring further querying and conceptual path finding in natural logic knowledge bases....

  12. Inter-technology knowledge spillovers for energy technologies

    International Nuclear Information System (INIS)

    Nemet, Gregory F.

    2012-01-01

    Both anecdotal evidence and the innovation literature indicate that important advances in energy technology have made use of knowledge originating in other technological areas. This study uses the set of U.S. patents granted from 1976 to 2006 to assess the role of knowledge acquired from outside each energy patent's technological classification. It identifies the effect of external knowledge on the forward citation frequency of energy patents. The results support the claim above. Regression coefficients on citations to external prior art are positive and significant. Further, the effect of external citations is significantly larger than that of other types of citations. Conversely, citations to prior art that is technologically near have a negative effect on forward citation frequency. These results are robust across several alternative specifications and definitions of whether each flow of knowledge is external. Important energy patents have drawn heavily from external prior art categorized as chemical, electronics, and electrical; they cite very little prior art from computers, communications, and medical inventions.

  13. Ontologies, Knowledge Bases and Knowledge Management

    National Research Council Canada - National Science Library

    Chalupsky, Hans

    2002-01-01

    ...) an application called Strategy Development Assistant (SDA) that uses that ontology. The JFACC ontology served as a basis for knowledge sharing among several applications in the domain of air campaign planning...

  14. Ethics of Information Technologies in Knowledge Society

    DEFF Research Database (Denmark)

    Rendtorff, Jacob Dahl

    2016-01-01

    , information science, and knowledge society in order to define responsibility and accountability. Although relations of causalities may be blurred and complex because of the auto-poetic development of computers and information systems we may still have to face the fact that human beings are fundamentally......How should we define the ethics of information technology? It is not a new field of study in the sense that it requires an entirely new ethical thinking. Rather, it is a field where we can try to use our traditional philosophical notions and apply them to this field of computer technology...... responsible behind the responsibilities of the computers. So we can say that the concept of reliability and accountability is related to human responsibility in the field of Internet technology. Indeed, issues of hacking, viruses and intervention in computers also pose the problems of responsibility...

  15. Creating a knowledge-based economy in the United Arab Emirates: realising the unfulfilled potential of women in the science, technology and engineering fields

    Science.gov (United States)

    Ghazal Aswad, Noor; Vidican, Georgeta; Samulewicz, Diana

    2011-12-01

    As the United Arab Emirates (UAE) moves towards a knowledge-based economy, maximising the participation of the national workforce, especially women, in the transformation process is crucial. Using survey methods and semi-structured interviews, this paper examines the factors that influence women's decisions regarding their degree programme and their attitudes towards science, technology and engineering (STE). The findings point to the importance of adapting mainstream policies to the local context and the need to better understand the effect of culture and society on the individual and the economy. There is a need to increase interest in STE by raising awareness of what the fields entail, potential careers and their suitability with existing cultural beliefs. Also suggested is the need to overcome negative stereotypes of engineering, implement initiatives for further family involvement at the higher education level, as well as the need to ensure a greater availability of STE university programmes across the UAE.

  16. KNOWLEDGE SOCIETY, GENERAL FRAMEWORK FOR KNOWLEDGE BASED ECONOMY

    Directory of Open Access Journals (Sweden)

    Dragos CRISTEA

    2011-03-01

    Full Text Available This paper tries to present the existent relation between knowledge society and knowledge based economy. We will identify the main pillars of knowledge society and present their importance for the development of knowledge societies. Further, we will present two perspectives over knowledge societies, respectively science and learning perspectives, that directly affects knowledge based economies. At the end, we will conclude by identifying some important questions that must be answered regarding this new social paradigm.

  17. KNOWLEDGE AND XML BASED CAPP SYSTEM

    Institute of Scientific and Technical Information of China (English)

    ZHANG Shijie; SONG Laigang

    2006-01-01

    In order to enhance the intelligent level of system and improve the interactivity with other systems, a knowledge and XML based computer aided process planning (CAPP) system is implemented. It includes user management, bill of materials(BOM) management, knowledge based process planning, knowledge management and database maintaining sub-systems. This kind of nesting knowledge representation method the system provided can represent complicated arithmetic and logical relationship to deal with process planning tasks. With the representation and manipulation of XML based technological file, the system solves some important problems in web environment such as information interactive efficiency and refreshing of web page. The CAPP system is written in ASP VBScript, JavaScript, Visual C++ languages and Oracle database. At present, the CAPP system is running in Shenyang Machine Tools. The functions of it meet the requirements of enterprise production.

  18. Visualizing the nuclear science and technology knowledge domain

    Energy Technology Data Exchange (ETDEWEB)

    Melo, Bruno Mattos Souza de Souza; Honaiser, Eduardo H.R. [Centro Tecnologico da Marinha em Sao Paulo (CTMSP), SP (Brazil)]. E-mails: brunomelo@ieee.org; ehonaiser@yahoo.com.br

    2007-07-01

    In this paper, a knowledge domain visualization approach is applied to the nuclear science and technology fields. A so-called concept density map based on the abstracts of the papers presented at the ICONE 14 is constructed. The concept map provides an overview of the nuclear science and technology fields by visualizing the associations between their main concepts. To analyze recent developments the concept map is compared with a concept map based on abstracts of earlier ICONE meetings. The analysis presented in the paper provides insight into the structure of the nuclear science and technology fields and into the most significant developments carried out during the last few years. (author)

  19. Developing technology intelligence strategy to access knowledge of innovation clusters.

    OpenAIRE

    Rani Jeanne Dang; Letizia Mortara; Ruth Thomson; Tim Minshall

    2010-01-01

    Current times are characterised by a knowledge-based economy and fast technological change. In this difficult environment, companies compete to maintain a relevant position through innovation. In response to these challenges, many companies are currently adopting an open approach to innovation, pursuing innovation by combining internal and external resources. Technology intelligence (TI) activities support the implementation of open innovation with the systematic capture and delivery of infor...

  20. Knowledge management impact of information technology Web 2.0/3.0. The case study of agent software technology usability in knowledge management system

    Science.gov (United States)

    Sołtysik-Piorunkiewicz, Anna

    2015-02-01

    How we can measure the impact of internet technology Web 2.0/3.0 for knowledge management? How we can use the Web 2.0/3.0 technologies for generating, evaluating, sharing, organizing knowledge in knowledge-based organization? How we can evaluate it from user-centered perspective? Article aims to provide a method for evaluate the usability of web technologies to support knowledge management in knowledge-based organizations of the various stages of the cycle knowledge management, taking into account: generating knowledge, evaluating knowledge, sharing knowledge, etc. for the modern Internet technologies based on the example of agent technologies. The method focuses on five areas of evaluation: GUI, functional structure, the way of content publication, organizational aspect, technological aspect. The method is based on the proposed indicators relating respectively to assess specific areas of evaluation, taking into account the individual characteristics of the scoring. Each of the features identified in the evaluation is judged first point wise, then this score is subject to verification and clarification by means of appropriate indicators of a given feature. The article proposes appropriate indicators to measure the impact of Web 2.0/3.0 technologies for knowledge management and verification them in an example of agent technology usability in knowledge management system.

  1. Changing Knowledge, Changing Technology: Implications for Teacher Education Futures

    Science.gov (United States)

    Burden, Kevin; Aubusson, Peter; Brindley, Sue; Schuck, Sandy

    2016-01-01

    Recent research in teacher education futures has identified two themes that require further study: the changing nature of knowledge and the changing capabilities of technologies. This article examines the intersection of these two themes and their implications for teacher education. The research employed futures methodologies based on scenario…

  2. An Examination of Science Teachers' Knowledge Structures towards Technology

    Science.gov (United States)

    Bilici, Sedef Canbazoglu

    2016-01-01

    The purpose of the study was to examine science teachers' knowledge structures on technology, who participated in a TPACK-based Professional Development (PD) program. The PD program was executed in the summer of 2015-2016 academic year with 24 science teachers. Data was collected with the Word Association Test (WAT). A holistic case study approach…

  3. Current Knowledge on Microarray Technology - An Overview

    African Journals Online (AJOL)

    Erah

    This paper reviews basics and updates of each microarray technology and serves to .... through protein microarrays. Protein microarrays also known as protein chips are nothing but grids that ... conditioned media, patient sera, plasma and urine. Clontech ... based antibody arrays) is similar to membrane-based antibody ...

  4. Distributed, cooperating knowledge-based systems

    Science.gov (United States)

    Truszkowski, Walt

    1991-01-01

    Some current research in the development and application of distributed, cooperating knowledge-based systems technology is addressed. The focus of the current research is the spacecraft ground operations environment. The underlying hypothesis is that, because of the increasing size, complexity, and cost of planned systems, conventional procedural approaches to the architecture of automated systems will give way to a more comprehensive knowledge-based approach. A hallmark of these future systems will be the integration of multiple knowledge-based agents which understand the operational goals of the system and cooperate with each other and the humans in the loop to attain the goals. The current work includes the development of a reference model for knowledge-base management, the development of a formal model of cooperating knowledge-based agents, the use of testbed for prototyping and evaluating various knowledge-based concepts, and beginning work on the establishment of an object-oriented model of an intelligent end-to-end (spacecraft to user) system. An introductory discussion of these activities is presented, the major concepts and principles being investigated are highlighted, and their potential use in other application domains is indicated.

  5. Information modelling and knowledge bases XXV

    CERN Document Server

    Tokuda, T; Jaakkola, H; Yoshida, N

    2014-01-01

    Because of our ever increasing use of and reliance on technology and information systems, information modelling and knowledge bases continue to be important topics in those academic communities concerned with data handling and computer science. As the information itself becomes more complex, so do the levels of abstraction and the databases themselves. This book is part of the series Information Modelling and Knowledge Bases, which concentrates on a variety of themes in the important domains of conceptual modeling, design and specification of information systems, multimedia information modelin

  6. Knowledge Management in the Development and Use of Radiation Technologies

    International Nuclear Information System (INIS)

    Egorkin, A.V.; Kartashev, E.R.; Sumina, N.A.; Kheteev, M.V.

    2014-01-01

    Preservation and Transfer of Knowledge: Preservation of critical knowledge in institute takes place in three ways: - First, by digitization of scientific, technical, patent and design documentation. This work has already been done by more than 3,000 documents: technical reports, patents, articles and monographs of the Institute employees, periodic collections - works of the Institute ('''Radiation Technology'' and ''Problems of Atomic Science and Technology'', a series of ''Radiation Technology'' and ''Technical Physics and Automation''), scientific-technical and design documentation for virtually the entire period of the Institute activity. - Secondly, the knowledge and experience of individual specialists transferred to successors (in addition to the reports and publications in scientific and technical literature ), the most effectively – through working together on themes on research and development of methods and technical devices, by preparation of theses and dissertations. In such a way, Knowledge is transferred, for example, in the development in the Institute of gamma-therapeutic complex. - Third, one of the modern methods of preserving knowledge is to create a multimedia product, when expert, the carrier of knowledge, records the information on progress, successes and challenges in the work, methods of its overcoming, information on scientific and methodological and technical achievements throughout his creative life, the necessary data on scientific and technical reference books, which can later help followers to create new methods and devices. Such multimedia product was prepared in the institute on the base of the experience of the development of gamma irradiation installations, in particular for sterilization of medical products

  7. New Technologies for Parliaments Managing Knowledge for Sustaining Democracy

    Directory of Open Access Journals (Sweden)

    Mauro ROMANELLI

    2016-12-01

    Full Text Available Parliaments as information and knowledge-based organizations are embracing the Internet and new technologies of information and communication for coping with the crisis of legitimacy relying on citizens feeling disenchanted about politics. Parliaments as democratic institutions engaging citizens use technology for better managing sources of knowledge and information and developing public policies as result of knowledge sharing and dialogue between public institutions and citizens. Parliaments dealing with an increasing complexity of governing tend to introduce new technologies following an information or knowledge approach to achieve legitimacy as credible institutions encouraging an active participation of citizens, for building a sustainable and democratic path promoting active citizenship. Parliaments sustain democracy by managing knowledge and information, structuring the e-parliament between merely providing a channel for citizens having access to information and developing active communication for engendering a dialogue with citizens to be included and exert influence in the policy process by encouraging participatory models driving the search of knowledge for building policies.

  8. Investigation of Technological Pedagogy Content Knowledge of Pre-Service Science and Technology Teachers

    OpenAIRE

    Bayram AKARSU; Esra GÜVEN

    2014-01-01

    The purpose of this study is to investigate Technological Pedagogical Content Knowledge (TPACK) of 3rd and 4th year prospective science teachers, enrollment at the faculty of education, with respect to the technological knowledge (TK), pedagogical knowledge (PK), content knowledge (CK), technological pedagogical knowledge (TPC), pedagogical content knowledge (PCK), and information in the technological content (TPC). These knowledge types are intersection of the sub-dimensions to determine whe...

  9. Reusing Design Knowledge Based on Design Cases and Knowledge Map

    Science.gov (United States)

    Yang, Cheng; Liu, Zheng; Wang, Haobai; Shen, Jiaoqi

    2013-01-01

    Design knowledge was reused for innovative design work to support designers with product design knowledge and help designers who lack rich experiences to improve their design capacity and efficiency. First, based on the ontological model of product design knowledge constructed by taxonomy, implicit and explicit knowledge was extracted from some…

  10. Knowledge Acquisition Using Linguistic-Based Knowledge Analysis

    Science.gov (United States)

    Daniel L. Schmoldt

    1998-01-01

    Most knowledge-based system developmentefforts include acquiring knowledge from one or more sources. difficulties associated with this knowledge acquisition task are readily acknowledged by most researchers. While a variety of knowledge acquisition methods have been reported, little has been done to organize those different methods and to suggest how to apply them...

  11. Analysing Teacher Knowledge for Technology Education in Primary Schools

    Science.gov (United States)

    Rohaan, Ellen J.; Taconis, Ruurd; Jochems, Wim M. G.

    2012-01-01

    Teacher knowledge guides a teacher's behaviour in the classroom. Teacher knowledge for technology education is generally assumed to play an important role in affecting pupils' learning in technology. There are an abundant number of teacher knowledge models that visualise different domains of teacher knowledge, but clear empirical evidence on how…

  12. Analysing Models as a Knowledge Technology in Transport Planning

    DEFF Research Database (Denmark)

    Gudmundsson, Henrik

    2011-01-01

    critical analytic literature on knowledge utilization and policy influence. A simple scheme based in this literature is drawn up to provide a framework for discussing the interface between urban transport planning and model use. A successful example of model use in Stockholm, Sweden is used as a heuristic......Models belong to a wider family of knowledge technologies, applied in the transport area. Models sometimes share with other such technologies the fate of not being used as intended, or not at all. The result may be ill-conceived plans as well as wasted resources. Frequently, the blame...... device to illuminate how such an analytic scheme may allow patterns of insight about the use, influence and role of models in planning to emerge. The main contribution of the paper is to demonstrate that concepts and terminologies from knowledge use literature can provide interpretations of significance...

  13. Adapting Technological Pedagogical Content Knowledge Framework to Teach Mathematics

    Science.gov (United States)

    Getenet, Seyum Tekeher

    2017-01-01

    The technological pedagogical content knowledge framework is increasingly in use by educational technology researcher as a generic description of the knowledge requirements for teachers using technology in all subjects. This study describes the development of a mathematics specific variety of the technological pedagogical content knowledge…

  14. Automated knowledge-base refinement

    Science.gov (United States)

    Mooney, Raymond J.

    1994-01-01

    Over the last several years, we have developed several systems for automatically refining incomplete and incorrect knowledge bases. These systems are given an imperfect rule base and a set of training examples and minimally modify the knowledge base to make it consistent with the examples. One of our most recent systems, FORTE, revises first-order Horn-clause knowledge bases. This system can be viewed as automatically debugging Prolog programs based on examples of correct and incorrect I/O pairs. In fact, we have already used the system to debug simple Prolog programs written by students in a programming language course. FORTE has also been used to automatically induce and revise qualitative models of several continuous dynamic devices from qualitative behavior traces. For example, it has been used to induce and revise a qualitative model of a portion of the Reaction Control System (RCS) of the NASA Space Shuttle. By fitting a correct model of this portion of the RCS to simulated qualitative data from a faulty system, FORTE was also able to correctly diagnose simple faults in this system.

  15. Gestalteconomy: The economic bases of knowledge management

    International Nuclear Information System (INIS)

    Maisseu, A.

    2006-01-01

    Conventional economic analyses are based on dogmas that are frequently out of phase with reality. It is thus very difficult to introduce technology, technological innovation and technical progress correctly into all the theoretical constructions derived from the application of these principles. The same applies to the consideration of pollution and the depletion of natural resources. These difficult problems, which bedevil the definition of a sustainable development, find no satisfactory answer in these theoretical considerations. The consideration of Gestalteconomy helps to resolve these difficulties, in opening the door to the entrepreneurial practical management of knowledge. (author)

  16. Role of Knowledge Based Communities in Knowledge Process

    Directory of Open Access Journals (Sweden)

    Sebastian Ion CEPTUREANU

    2015-12-01

    Full Text Available In the new economy, knowledge is an essential component of economic and social systems. The organizational focus has to be on building knowledge-based management, development of human resource and building intellectual capital capabilities. Knowledge-based management is defined, at company level, by economic processes that emphasize creation, selling, buying, learning, storing, developing, sharing and protection of knowledge as a decisive condition for profit and long-term sustainability of the company. Hence, knowledge is, concurently, according to a majoritiy of specialists, raw material, capital, product and an essential input. Knowledge-based communities are one of the main constituent elements of a framework for knowledge based management. These are peer networks consisting of practitioners within an organization, supporting each other to perform better through the exchange and sharing of knowledge. Some large companies have contributed or supported the establishment of numerous communities of practice, some of which may have several thousand members. They operate in different ways, are of different sizes, have different areas of interest and addresses knowledge at different levels of its maturity. This article examines the role of knowledge-based communities from the perspective of knowledge based management, given that the arrangements for organizational learning, creating, sharing, use of knowledge within organizations become more heterogeneous and take forms more difficult to predict by managers and specialists.

  17. Knowledge representation and knowledge base design for operator advisor system

    International Nuclear Information System (INIS)

    Hangos, K.M.; Sziano, T.; Tapolcai, L.

    1990-01-01

    The problems of knowledge representation, knowledge base handling and design has been described for an Operator Advisor System in the Paks Nuclear Power Plant. The Operator Advisor System is to be implemented as a part of the 5th and 6th unit. The knowledge of the Operator Advisor system is described by a few elementary knowledge items (diagnostic event functions, fault graph, action trees), weighted directed graphs have been found as their common structure. List-type and relational representation of these graphs have been used for the on-line and off-line part of the knowledge base respectively. A uniform data base design and handling has been proposed which consists of a design system, a knowledge base editor and a knowledge base compiler

  18. Need to Knowledge (NtK) Model: an evidence-based framework for generating technological innovations with socio-economic impacts.

    Science.gov (United States)

    Flagg, Jennifer L; Lane, Joseph P; Lockett, Michelle M

    2013-02-15

    Traditional government policies suggest that upstream investment in scientific research is necessary and sufficient to generate technological innovations. The expected downstream beneficial socio-economic impacts are presumed to occur through non-government market mechanisms. However, there is little quantitative evidence for such a direct and formulaic relationship between public investment at the input end and marketplace benefits at the impact end. Instead, the literature demonstrates that the technological innovation process involves a complex interaction between multiple sectors, methods, and stakeholders. The authors theorize that accomplishing the full process of technological innovation in a deliberate and systematic manner requires an operational-level model encompassing three underlying methods, each designed to generate knowledge outputs in different states: scientific research generates conceptual discoveries; engineering development generates prototype inventions; and industrial production generates commercial innovations. Given the critical roles of engineering and business, the entire innovation process should continuously consider the practical requirements and constraints of the commercial marketplace.The Need to Knowledge (NtK) Model encompasses the activities required to successfully generate innovations, along with associated strategies for effectively communicating knowledge outputs in all three states to the various stakeholders involved. It is intentionally grounded in evidence drawn from academic analysis to facilitate objective and quantitative scrutiny, and industry best practices to enable practical application. The Need to Knowledge (NtK) Model offers a practical, market-oriented approach that avoids the gaps, constraints and inefficiencies inherent in undirected activities and disconnected sectors. The NtK Model is a means to realizing increased returns on public investments in those science and technology programs expressly intended to

  19. Return on Knowledge Assets: Rethinking Investments in Educational Technology.

    Science.gov (United States)

    Watkins, Karen E.; Callahan, Mary Wilson

    1998-01-01

    Presents various ways of understanding knowledge and intellectual capital and the assets they produce. Considers implications of assessing the return on educational technologies as organizational knowledge assets. Presents a case study to illustrate how an educational technology application might help capture the benefits of knowledge capital.…

  20. Model of educational field on the basis of technology of knowledge management

    Directory of Open Access Journals (Sweden)

    Виталий Алексеевич Кудинов

    2010-03-01

    Full Text Available The paper presents an approach to the description of educational field-based technologies for knowledge management. Two level system of knowledge representation, including the concepts of knowledge and training facilities is proposed. Such organization allows corporate knowledge management portal to easily adapt training to the individual needs of a learner.

  1. Higher education technological knowledge and patterns of technology adoptions in undergraduate STEM courses

    Science.gov (United States)

    Ali, Zarka Asghar

    Identifying, examining, and understanding faculty members' technological knowledge development and the process of technology adoption in higher education is a multifaceted process. Past studies have used Rogers (1995, 2003) diffusion of innovation theoretical framework to delineate the technology adoption process. These studies, however, have frequently reported the influencing factors based on the statistical analysis such as regression analysis-based approach, and have not focused on the emerging process of technology adoptions or the developing process of technological knowledge and pedagogical knowledge. A mixed method study was designed to see how faculty members acquire different technologies and develop technological knowledge that might help them adopt technologies in their classrooms and online using different pedagogies. A sample of STEM teaching faculty members with different ranks, tenure, teaching experience, and varied degree of experience in the use of educational technologies participated in the study. A survey was designed to identify internal and external factors affecting technology adoption and its effective use in different teaching activities. To elaborate survey results, the study also included class observations as well as pre- and post-observation interviews. Online classrooms used by the faculty via Blackboard learning management system, online flipped classrooms, or other websites such as Piazza were also examined for data triangulation. The findings of the study indicate that faculty members are influenced by their own professional motivations and student learning to improve their teaching methods and to enhance student interactions and learning through the use of different educational technologies. The adoption process was identified as spreading over a period of time and it looked at how faculty members' developed their technological knowledge and pedagogical knowledge. With the recognition of the social, organizational, and

  2. Mediated Effects of Technology Competencies and Experiences on Relations among Attitudes Towards Technology Use, Technology Ownership, and Self Efficacy about Technological Pedagogical Content Knowledge

    Science.gov (United States)

    Yerdelen-Damar, Sevda; Boz, Yezdan; Aydın-Günbatar, Sevgi

    2017-08-01

    This study examined the relations of preservice science teachers' attitudes towards technology use, technology ownership, technology competencies, and experiences to their self-efficacy beliefs about technological pedagogical content knowledge (TPACK). The present study also investigated interrelations among preservice teachers' attitudes towards technology use, technology ownership, technology competencies, and experiences. The participants of study were 665 elementary preservice science teachers (467 females, 198 males) from 7 colleges in Turkey. The proposed model based on educational technology literature was tested using structural equation modeling. The model testing results revealed that preservice teachers' technology competencies and experiences mediated the relation of technology ownership to their TPACK self efficacy beliefs. The direct relation of their possession of technology to their TPACK self efficacy beliefs was insignificant while the indirect relation through their technology competencies and experiences was significant. The results also indicated there were significant direct effects of preservice teachers' attitudes towards technology use, technology competencies, and experiences on their TPACK self efficacy beliefs.

  3. Study on the knowledge management of strategic alliances in high technology enterprises

    Institute of Scientific and Technical Information of China (English)

    TANG Yu; WANG Hong-qi; WANG Shan-shan

    2005-01-01

    With the development of knowledge economy, the competition between high technology enterprises has gradually evolved into the competition of core competence based on knowledge, because high technology enterprises are typical knowledge-based enterprises. Few enterprises, especially for high technology firms, have all of the knowledge they need to compete effectively in the marketplace both at home and abroad, so more and more high technology companies are taking the advantage of strategic alliances to get their complementary knowledge. Since knowledge is the source of an enterprise' s competitiveness, knowledge management has become the most important means for enterprises to gain competitive advantage. There has been an increased growth in the literature on strategic alliances in recent decades. But what is less discussed in the existing literature on strategic alliances is the issue of knowledge management of strategic alliances in high technology enterprises. Based on the characteristics of strategic alliances in high technology enterprises, and in line with the implication and the goal of knowledge management, this study tries to delve into this issue. The paper analyzes the key factors relevant to the knowledge management of strategic alliances in high technology enterprises and proposes guide lines on the process and measures that should be taken in the knowledge management of strategic alliances in high technology enterprises.

  4. Nuclear Knowledge Innovations Assimilation: The Impact of Organizational Knowledge Frames and Triple Helix Dynamics of Knowledge Base

    International Nuclear Information System (INIS)

    Hossain, M. D.; Sultana, T.

    2016-01-01

    Full text: Previous research did not investigate the impact of the TH dynamics of knowledge innovations on the nuclear knowledge innovations adoption/assimilation in the organizational context. Hence, the recommendation of R&D policy reformulation seems too broad. These gaps are the prime motivators for the research. In the organizational context, we posit that TH dynamics of knowledge base innovation serves as complements to managers’ knowledge frames related to a technology innovation. We examine interactions between three knowledge frames—integration frame, opportunism frame, and policy knowledge frame, and two TH dynamics of knowledge innovations—bilateral TH dynamics of knowledge innovations and trilateral TH dynamics of knowledge innovations, and their relationship with the assimilation of nuclear knowledge innovations. We aim to research on the issues of the dynamics of knowledge base of innovations involving TH collaborations (university, industry and government) in Bangladesh as a new build nuclear project. As a result, we can find out the impact of TH collaborations on organizational nuclear knowledge innovations management as well as core institutional problems of the knowledge base of innovation systems in terms of R&D policy. Finally, findings identify lack in production of nuclear knowledge innovations and concrete recommendation of R&D policy reformulation. (author

  5. Knowledge Management and Information Technology (Know-IT Encyclopedia)

    National Research Council Canada - National Science Library

    Pollock, Neal

    2002-01-01

    .... This encyclopedia is an attempt to create and distribute a knowledge-level tool. Much of it is tacit knowledge taken from the author's experience on-the-job at the Program Executive Office for Information Technology (PEO...

  6. An Emerging Knowledge-Based Economy in China? Indicators from OECD Databases. OECD Science, Technology and Industry Working Papers, 2004/4

    Science.gov (United States)

    Criscuolo, Chiara; Martin, Ralf

    2004-01-01

    The main objective of this Working Paper is to show a set of indicators on the knowledge-based economy for China, mainly compiled from databases within EAS, although data from databases maintained by other parts of the OECD are included as well. These indicators are put in context by comparison with data for the United States, Japan and the EU (or…

  7. Creating a Knowledge-Based Economy in the United Arab Emirates: Realising the Unfulfilled Potential of Women in the Science, Technology and Engineering Fields

    Science.gov (United States)

    Aswad, Noor Ghazal; Vidican, Georgeta; Samulewicz, Diana

    2011-01-01

    As the United Arab Emirates (UAE) moves towards a knowledge-based economy, maximising the participation of the national workforce, especially women, in the transformation process is crucial. Using survey methods and semi-structured interviews, this paper examines the factors that influence women's decisions regarding their degree programme and…

  8. Knowledge based systems for intelligent robotics

    Science.gov (United States)

    Rajaram, N. S.

    1982-01-01

    It is pointed out that the construction of large space platforms, such as space stations, has to be carried out in the outer space environment. As it is extremely expensive to support human workers in space for large periods, the only feasible solution appears to be related to the development and deployment of highly capable robots for most of the tasks. Robots for space applications will have to possess characteristics which are very different from those needed by robots in industry. The present investigation is concerned with the needs of space robotics and the technologies which can be of assistance to meet these needs, giving particular attention to knowledge bases. 'Intelligent' robots are required for the solution of arising problems. The collection of facts and rules needed for accomplishing such solutions form the 'knowledge base' of the system.

  9. Knowledge-based computer security advisor

    International Nuclear Information System (INIS)

    Hunteman, W.J.; Squire, M.B.

    1991-01-01

    The rapid expansion of computer security information and technology has included little support to help the security officer identify the safeguards needed to comply with a policy and to secure a computing system. This paper reports that Los Alamos is developing a knowledge-based computer security system to provide expert knowledge to the security officer. This system includes a model for expressing the complex requirements in computer security policy statements. The model is part of an expert system that allows a security officer to describe a computer system and then determine compliance with the policy. The model contains a generic representation that contains network relationships among the policy concepts to support inferencing based on information represented in the generic policy description

  10. Thinking on the development of nuclear science and technology information in knowledge economy time

    International Nuclear Information System (INIS)

    Zhang Yue

    2010-01-01

    The arrival of knowledge-based economy has brought the opportunities and challenges for the development of nuclear science and technology information. In the knowledge economy environment, knowledge becomes the new driving force for economic development, and people's demand for nuclear science and technology expertise will significantly increase. So the role of nuclear science and technology intelligence services will become even more and more prominent. Meanwhile, with the rapid development of modem information technology, the informatization of human society is towards the development of digital and intelligent. This also will raise new demands for nuclear science and technology information work. Discusses the status of nuclear science and technology information work of own units under the knowledge-based economy condition, and puts forward some thought and suggestions on development of nuclear science and technology information work under the knowledge economy environment. (author)

  11. Managing Knowledge-Based Resource Capabilities Under Uncertainty

    OpenAIRE

    Janice E. Carrillo; Cheryl Gaimon

    2004-01-01

    A firm's ability to manage its knowledge-based resource capabilities has become increasingly important as a result of performance threats triggered by technology change and intense competition. At the manufacturing plant level, we focus on three repositories of knowledge that drive performance. First, the physical production or information systems represent knowledge embedded in the plant's technical systems. Second, the plant's workforce has knowledge, including diverse scientific informatio...

  12. An Ebola virus-centered knowledge base

    Science.gov (United States)

    Kamdar, Maulik R.; Dumontier, Michel

    2015-01-01

    Ebola virus (EBOV), of the family Filoviridae viruses, is a NIAID category A, lethal human pathogen. It is responsible for causing Ebola virus disease (EVD) that is a severe hemorrhagic fever and has a cumulative death rate of 41% in the ongoing epidemic in West Africa. There is an ever-increasing need to consolidate and make available all the knowledge that we possess on EBOV, even if it is conflicting or incomplete. This would enable biomedical researchers to understand the molecular mechanisms underlying this disease and help develop tools for efficient diagnosis and effective treatment. In this article, we present our approach for the development of an Ebola virus-centered Knowledge Base (Ebola-KB) using Linked Data and Semantic Web Technologies. We retrieve and aggregate knowledge from several open data sources, web services and biomedical ontologies. This knowledge is transformed to RDF, linked to the Bio2RDF datasets and made available through a SPARQL 1.1 Endpoint. Ebola-KB can also be explored using an interactive Dashboard visualizing the different perspectives of this integrated knowledge. We showcase how different competency questions, asked by domain users researching the druggability of EBOV, can be formulated as SPARQL Queries or answered using the Ebola-KB Dashboard. Database URL: http://ebola.semanticscience.org. PMID:26055098

  13. An Ebola virus-centered knowledge base.

    Science.gov (United States)

    Kamdar, Maulik R; Dumontier, Michel

    2015-01-01

    Ebola virus (EBOV), of the family Filoviridae viruses, is a NIAID category A, lethal human pathogen. It is responsible for causing Ebola virus disease (EVD) that is a severe hemorrhagic fever and has a cumulative death rate of 41% in the ongoing epidemic in West Africa. There is an ever-increasing need to consolidate and make available all the knowledge that we possess on EBOV, even if it is conflicting or incomplete. This would enable biomedical researchers to understand the molecular mechanisms underlying this disease and help develop tools for efficient diagnosis and effective treatment. In this article, we present our approach for the development of an Ebola virus-centered Knowledge Base (Ebola-KB) using Linked Data and Semantic Web Technologies. We retrieve and aggregate knowledge from several open data sources, web services and biomedical ontologies. This knowledge is transformed to RDF, linked to the Bio2RDF datasets and made available through a SPARQL 1.1 Endpoint. Ebola-KB can also be explored using an interactive Dashboard visualizing the different perspectives of this integrated knowledge. We showcase how different competency questions, asked by domain users researching the druggability of EBOV, can be formulated as SPARQL Queries or answered using the Ebola-KB Dashboard. © The Author(s) 2015. Published by Oxford University Press.

  14. Can Mobile Technology Enable Knowledge Communication in a Learning Environment?

    DEFF Research Database (Denmark)

    Kampf, Constance; Islas Sedano, Carolina

    2008-01-01

    this mobile phone game to help next years' students navigated the CampusNet system in order to study for the exam.  The CampusNet system can be seen as a knowledge management technology situated within the social context of the Project Management course, and so the examples offered, in effect, demonstrate...... To be effective, knowledge management systems need to encompass both social processes and technical components (McDermott 2000),   On the other hand, knowledge communication as a concept has emerged not from the inspiration of technology, but partly from the social-technical challenge of dealing...... with technology in knowledge management systems.  So, is knowledge communication a process that can be technologically enabled?  In this presentation, we explore the possibilities of socio-technical interaction for knowledge communication through the use of a mobile phone game as a knowledge communication tool...

  15. Data mining and knowledge discovery technologies

    National Research Council Canada - National Science Library

    Taniar, David

    2008-01-01

    "This book presents researchers and practitioners in fields such as knowledge management, information science, Web engineering, and medical informatics, with comprehensive, innovative research on data...

  16. Mapping the Technological Knowledge Landscape: The Case of Epigenetics.

    Science.gov (United States)

    Song, Chie Hoon; Yoon, Janghyeok; Ko, Namuk; Han, Jeung-Whan

    2016-01-01

    Epigenetics is a biomedical novelty in drug design and disease control whose mechanisms play a significant role in transferring environmental signals to determine patterns of gene expression. Systematic identification of the main trends in epigenetics patenting activity provides insights into fundamental building blocks of this research field and policy guidance to funding agencies. The review aims at providing a comprehensive overview of the research and development trend in epigenetics by mapping the knowledge structure in patent landscape. Citation-based patent network analysis was performed to visualize the technological landscape. We focus on identifying the structure of the knowledge networks to study the technological trajectories. Patents that play an integral part in the dissemination and bridging of the technical knowledge are located and ranked. The latent topics in patent documents are highlighted by means of a topic modeling technique. Visualization of the patent network results in four main clusters. The first two clusters deal with the inhibition of histone deacetylase (HDAC). The third cluster covers inventions related to DNA methylation, which represents an epigenetic signaling tool that cells use to control gene expression. The fourth cluster encompasses computing systems and data mining techniques for identifying combinations of genetic and epigenetic attributes related to health and lifestyle improvements. We are in the growth period of gathering knowledge on various mechanisms of epigenetic regulation. There is enormous potential for improving healthcare through better understanding of the interrelationships between epigenetic control of gene expression and compounds that trigger these modifications.

  17. globalization, technology transfer and the knowledge gap

    African Journals Online (AJOL)

    USER

    2011-06-10

    Jun 10, 2011 ... manufacturing technology to the less developed countries of the South (Nigeria) in ... the primary sources of progress (Mill 1846 cited .... globalization process as in Asia and Latin. America. The Nigerian technology dream is.

  18. A knowledge base architecture for distributed knowledge agents

    Science.gov (United States)

    Riedesel, Joel; Walls, Bryan

    1990-01-01

    A tuple space based object oriented model for knowledge base representation and interpretation is presented. An architecture for managing distributed knowledge agents is then implemented within the model. The general model is based upon a database implementation of a tuple space. Objects are then defined as an additional layer upon the database. The tuple space may or may not be distributed depending upon the database implementation. A language for representing knowledge and inference strategy is defined whose implementation takes advantage of the tuple space. The general model may then be instantiated in many different forms, each of which may be a distinct knowledge agent. Knowledge agents may communicate using tuple space mechanisms as in the LINDA model as well as using more well known message passing mechanisms. An implementation of the model is presented describing strategies used to keep inference tractable without giving up expressivity. An example applied to a power management and distribution network for Space Station Freedom is given.

  19. Knowledge Base Editor (SharpKBE)

    Science.gov (United States)

    Tikidjian, Raffi; James, Mark; Mackey, Ryan

    2007-01-01

    The SharpKBE software provides a graphical user interface environment for domain experts to build and manage knowledge base systems. Knowledge bases can be exported/translated to various target languages automatically, including customizable target languages.

  20. Technology based Education System

    DEFF Research Database (Denmark)

    Kant Hiran, Kamal; Doshi, Ruchi; Henten, Anders

    2016-01-01

    Abstract - Education plays a very important role for the development of the country. Education has multiple dimensions from schooling to higher education and research. In all these domains, there is invariably a need for technology based teaching and learning tools are highly demanded in the acad......Abstract - Education plays a very important role for the development of the country. Education has multiple dimensions from schooling to higher education and research. In all these domains, there is invariably a need for technology based teaching and learning tools are highly demanded...... in the academic institutions. Thus, there is a need of comprehensive technology support system to cater the demands of all educational actors. Cloud Computing is one such comprehensive and user-friendly technology support environment that is the need of an hour. Cloud computing is the emerging technology that has...

  1. KNOWLEDGE, TECHNOLOGY ADOPTION AND FINANCIAL INNOVATION

    OpenAIRE

    Ana Fernandes

    2004-01-01

    Why are new financial instruments created? This paper proposes the view that financial development arises as a response to the contractual needs of emerging technologies. Exogenous technological progress generates a demand for new financial instruments in order to share risk or overcome private information, for example. A model of the dynamics of technology adoption and the evolution of financial instruments that support such adoption is presented. Early adoption may be required for financial...

  2. Refining Automatically Extracted Knowledge Bases Using Crowdsourcing

    OpenAIRE

    Li, Chunhua; Zhao, Pengpeng; Sheng, Victor S.; Xian, Xuefeng; Wu, Jian; Cui, Zhiming

    2017-01-01

    Machine-constructed knowledge bases often contain noisy and inaccurate facts. There exists significant work in developing automated algorithms for knowledge base refinement. Automated approaches improve the quality of knowledge bases but are far from perfect. In this paper, we leverage crowdsourcing to improve the quality of automatically extracted knowledge bases. As human labelling is costly, an important research challenge is how we can use limited human resources to maximize the quality i...

  3. Knowledge management, health information technology and nurses' work engagement

    NARCIS (Netherlands)

    Hendriks, P.H.J.; Ligthart, P.E.M.; Schouteten, R.L.J.

    2016-01-01

    BACKGROUND: Knowledge management (KM) extends the health information technology (HIT) literature by addressing its impact on creating knowledge by sharing and using the knowledge of health care professionals in hospitals. PURPOSE: The aim of the study was to provide insight into how HIT affects

  4. Current Knowledge on Microarray Technology - An Overview

    African Journals Online (AJOL)

    Erah

    Review Article. Current Knowledge ... containing libraries of oligonucleotides robotically ... measurements, and averages over each oligonucleotide. ... quality of chips produced depends critically ..... Bae EK, Lee H, Lee JS, Noh EW. Isolation ...

  5. Knowledge Management Technology for Decision Support: an empirical examination

    Directory of Open Access Journals (Sweden)

    Meliha Handzic

    2001-11-01

    Full Text Available This paper reports the results of an empirical examination of the effectiveness of one type of knowledge management technology, namely 'contextual knowledge repository', for supporting individual decision makers in a predictive judgement task context. 31 volunteer subjects participated in the study. The results indicate that a given technology was fairly useful, but insufficient to maximally enhance individual decision making. On one hand, subjects were found to extract more knowledge and make significantly smaller decision errors than their notional naive counterparts. On the other hand, subjects tended to extract less knowledge and make significantly larger decision errors compared to notional optimal counterparts. These findings suggest that individuals could potentially benefit from those knowledge management technologies that would provide additional explicit analytical and procedural knowledge, or those that would facilitate sharing of tacit knowledge through interaction with others. Future research is necessary to address these issues.

  6. Technological Pedagogical Content Knowledge (TPACK): The Development and Validation of an Assessment Instrument for Preservice Teachers

    Science.gov (United States)

    Schmidt, Denise A.; Baran, Evrim; Thompson, Ann D.; Mishra, Punya; Koehler, Matthew J.; Shin, Tae S.

    2009-01-01

    Based in Shulman's idea of Pedagogical Content Knowledge, Technological Pedagogical Content Knowledge (TPACK) has emerged as a useful frame for describing and understanding the goals for technology use in preservice teacher education. This paper addresses the need for a survey instrument designed to assess TPACK for preservice teachers. The paper…

  7. Measuring primary school teachers' pedagogical content knowledge in technology education with a multiple choice test

    NARCIS (Netherlands)

    Rohaan, E.J.; Taconis, R.; Jochems, W.M.G.; Fatih Tasar, M.; Cakankci, G.; Akgul, E.

    2009-01-01

    Pedagogical content knowledge (PCK) is a crucial part of a teacher’s knowledge base for teaching. Studies in the field of technology education for primary schools showed that this domain of teacher knowledge is related to pupils’ increased learning, motivation, and interest. The common methods to

  8. A Knowledge Management Technology Architecture for Educational Research Organisations: Scaffolding Research Projects and Workflow Processing

    Science.gov (United States)

    Muthukumar; Hedberg, John G.

    2005-01-01

    There is growing recognition that the economic climate of the world is shifting towards a knowledge-based economy where knowledge will be cherished as the most prized asset. In this regard, technology can be leveraged as a useful tool in effectually managing the knowledge capital of an organisation. Although several research studies have advanced…

  9. Nuclear technology and knowledge management in radioprotection

    International Nuclear Information System (INIS)

    Alonso, A.

    2007-01-01

    The cycle of life of nuclear power plant expands along seven well defined phases lasting about a century and therefore employing three successive generations. Each one of such phases is in need of specific knowledge on radiation protection matters. The nuclear moratorium introduced in Spain in 1983 suspended all those activities related to site selection, design and construction of new units and their commissioning. As it does not seem to be prudent to renounce to nuclear energy on a permanent basis, nuclear utilities, engineering and service companies, academic, research and state organizations agencies should establish programmes to recuperate the radiological knowledge and experience, among other subjects, acquired in the interrupted activities. Likewise, those responsible for the operation of nuclear power plants and the follow up activities should also establish knowledge management activities on radiation protection and other subject matters in line with the IAEA recommendations. (Author) 19 refs

  10. Understanding images using knowledge based approach

    International Nuclear Information System (INIS)

    Tascini, G.

    1985-01-01

    This paper presents an approach to image understanding focusing on low level image processing and proposes a rule-based approach as part of larger knowledge-based system. The general system has a yerarchical structure that comprises several knowledge-based layers. The main idea is to confine at the lower level the domain independent knowledge and to reserve the higher levels for the domain dependent knowledge, that is for the interpretation

  11. Technology and knowledge transfer for development

    CSIR Research Space (South Africa)

    Chakwizira, J

    2008-01-01

    Full Text Available policy makers, higher education and research (HER) communities, production entrepreneurs, funding agencies and consumers associations should be given priority. More emphasis on technological education and training as well as on the ability to acquire... Universities, Higher Education and Research & Development Institutions, Ministries of Education, Science & Technology in collaboration and partnership with other Ministries such as Ministry of Health, Ministry of Environment & Tourism, Ministry of Mining...

  12. Social Technologies and Informal Knowledge Sharing within and across Organizations

    Science.gov (United States)

    Jarrahi, Mohammad Hosein

    2013-01-01

    This doctoral dissertation is focused on both empirical and conceptual contributions relative to the roles social technologies play in informal knowledge sharing practices, both within and across organizations. Social technologies include (a) traditional social technologies (e.g., email, phone and instant messengers), (b) emerging social…

  13. Sustainable development, clean technology and knowledge from industry

    Directory of Open Access Journals (Sweden)

    Sokolović Slobodan M.

    2012-01-01

    Full Text Available Clean technology or clean production is the most important factor for the economic growth of a society and it will play the main role not only in the area of cleaner production, but also in sustainable development. The development of clean technology will be the main factor of the company’s strategy in the future. Each company, which wants to reach the competitive position at the market and wants to be environmentally friendly, has to accept the new approach in corporate management and the strategy of new clean technology. The main principles of clean technology are based on the concept of maximum resource and energy productivity and virtually no waste. This approach may be limited by human resources and the level of their environmental knowledge. Companies are committed to the development of the workers’ skills, and thus to the improvement of the company for the full implementation of the environmental legislation and clean production concept. Based on this commitment, one of Tempus projects is designed to improve the university-enterprise cooperation in the process of creating sustainable industry in Serbia, Bosnia and Herzegovina and the Former Yugoslav Republic of Macedonia. To achieve this goal, partner universities will create special courses on sustainable industry and thus enhance the lifelong learning process and cooperation between industry and universities in the Western Balkan countries.

  14. Convergence of knowledge, technology and society beyond convergence of nano-bio-info-cognitive technologies

    CERN Document Server

    Bainbridge, William; Tonn, Bruce; Whitesides, George

    2013-01-01

    Convergence of knowledge and technology for the benefit of society (CKTS) is the core opportunity for progress in the 21st century, based on five principles: (1) the interdependence of all components of nature and society, (2) enhancement of creativity and innovation through evolutionary processes of convergence that combine existing principles, and divergence that generates new ones, (3) decision analysis for research and development based on system-logic deduction, (4) higher-level cross-domain languages to generate new solutions and support transfer of new knowledge, and (5) vision-inspired basic research embodied in grand challenges. Solutions are outlined for key societal challenges, including creating new industries and jobs, improving lifelong wellness and human potential, achieving personalized and integrated healthcare and education, and securing a sustainable quality of life for all. This report provides a ten-year “NBIC2” vision within a longer-term framework for converging technology and human...

  15. An Insulating Glass Knowledge Base

    Energy Technology Data Exchange (ETDEWEB)

    Michael L. Doll; Gerald Hendrickson; Gerard Lagos; Russell Pylkki; Chris Christensen; Charlie Cureija

    2005-08-01

    This report will discuss issues relevant to Insulating Glass (IG) durability performance by presenting the observations and developed conclusions in a logical sequential format. This concluding effort discusses Phase II activities and focuses on beginning to quantifying IG durability issues while continuing the approach presented in the Phase I activities (Appendix 1) which discuss a qualitative assessment of durability issues. Phase II developed a focus around two specific IG design classes previously presented in Phase I of this project. The typical box spacer and thermoplastic spacer design including their Failure Modes and Effect Analysis (FMEA) and Fault Tree diagrams were chosen to address two currently used IG design options with varying components and failure modes. The system failures occur due to failures of components or their interfaces. Efforts to begin quantifying the durability issues focused on the development and delivery of an included computer based IG durability simulation program. The focus/effort to deliver the foundation for a comprehensive IG durability simulation tool is necessary to address advancements needed to meet current and future building envelope energy performance goals. This need is based upon the current lack of IG field failure data and the lengthy field observation time necessary for this data collection. Ultimately, the simulation program is intended to be used by designers throughout the current and future industry supply chain. Its use is intended to advance IG durability as expectations grow around energy conservation and with the growth of embedded technologies as required to meet energy needs. In addition the tool has the immediate benefit of providing insight for research and improvement prioritization. Included in the simulation model presentation are elements and/or methods to address IG materials, design, process, quality, induced stress (environmental and other factors), validation, etc. In addition, acquired data

  16. BRIDGING THE KNOWLEDGE DIVIDE Educational Technology for Development

    Directory of Open Access Journals (Sweden)

    Reviewed by Ozlem OZAN,

    2009-10-01

    Full Text Available BRIDGING THE KNOWLEDGE DIVIDEEducational Technology for DevelopmentMarshall,S., Kinuthia, W. & Wallace Taylor., Ed.D.; Information Age Publishing, Charlotte, NC, SBN: 978-1-60752-109-9, p.433, 2009Reviewed by Ozlem OZANFaculty of EducationEskişehir Osmangazi UniversityEskisehir, TURKEYThe concept of a knowledge divide is used to describe the gap in living conditions between those who can find, manage and process information or knowledge, and those who are impaired in this, for one reason or another. In the 21st century, the emergence of the knowledge society becomes pervasive hence the information and ICT systems that support knowledge are very important.This book discusses how educational technology can be used to transform education and assist developing communities to close the knowledge divide. Its broader audience is anyone who is interested in educational technology for development. In the book you can find best practices and case studies especially from countries in Africa.The book is edited by Stewart Marshall, Wanjira Kinuthia, Wallace Taylor. Professor Stewart Marshall, PhD, is the director of the Academic Division of the University of the West Indies Open Campus (UWIOC and holds the UNESCO Chair in Educational Technologies.Dr. Wanjira Kinuthia is assistant professor of Learning Technologies at Georgia State University. She works as an instructional designer in higher education and business and industry for several years. Professor Wallace Taylor, PhD, is a founding director of The Information Society Institute (TISI, a non-profit academic, research, and policy development organization based in South Africa.The book is consisted of 433 pages (+xxxv covering 24 articles divided into four sections and provides information about flexible learning for empowerment, managing and communicating knowledge, flexible delivery in higher education and preparing teacher using flexible approaches.Topics covered in the book are as follows

  17. Entrepreneurship and technology transfer knowledge utilization and management

    NARCIS (Netherlands)

    Chavez, Victor

    2016-01-01

    Research at the intersection of creative enterprise, knowledge intensive entrepreneurship, public policy, and economic development is limited, although individually, each of these areas has been researched extensively. Reflective practitioners in industry, Government, and Technology Transfer can

  18. NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 19: Computer and information technology and aerospace knowledge diffusion

    Science.gov (United States)

    Pinelli, Thomas E.; Kennedy, John M.; Barclay, Rebecca O.; Bishop, Ann P.

    1992-01-01

    To remain a world leader in aerospace, the US must improve and maintain the professional competency of its engineers and scientists, increase the research and development (R&D) knowledge base, improve productivity, and maximize the integration of recent technological developments into the R&D process. How well these objectives are met, and at what cost, depends on a variety of factors, but largely on the ability of US aerospace engineers and scientists to acquire and process the results of federally funded R&D. The Federal Government's commitment to high speed computing and networking systems presupposes that computer and information technology will play a major role in the aerospace knowledge diffusion process. However, we know little about information technology needs, uses, and problems within the aerospace knowledge diffusion process. The use of computer and information technology by US aerospace engineers and scientists in academia, government, and industry is reported.

  19. Knowledge-based metals & materials

    OpenAIRE

    Sasson, Amir

    2011-01-01

    This study presents the Norwegian metal and material industry (defined as all metal and material related firms located in Norway, regardless of ownership) and evaluates the industry according to the underlying dimensions of a global knowledge hub - cluster attractiveness, education attractiveness, talent attractiveness, R&D and innovation attractiveness, ownership attractiveness, environmental attractiveness and cluster dynamics.

  20. Tools for the Knowledge-Based Organization

    DEFF Research Database (Denmark)

    Ravn, Ib

    2002-01-01

    exist. They include a Master’s degree in knowledge management, a web- or print-based intelligence hub for the knowledge society, collaboration with the Danish intellectual capital reporting project, ongoing research on expertise and ethics in knowledge workers, a comparative study of competence...

  1. Mobile technologies for preservation of indigenous knowledge in rural communities

    DEFF Research Database (Denmark)

    Winschiers-Theophilus, Heike; Rodil, Kasper; Zaman, Tariq

    2013-01-01

    In this paper we explore the opportunities of mobile technologies in three of our own development endeavors with rural communities, promoting the preservation of indigenous knowledge. We reflect upon and recognize the fact that the representation of indigenous knowledge will be transformed within...

  2. Validation Of Critical Knowledge-Based Systems

    Science.gov (United States)

    Duke, Eugene L.

    1992-01-01

    Report discusses approach to verification and validation of knowledge-based systems. Also known as "expert systems". Concerned mainly with development of methodologies for verification of knowledge-based systems critical to flight-research systems; e.g., fault-tolerant control systems for advanced aircraft. Subject matter also has relevance to knowledge-based systems controlling medical life-support equipment or commuter railroad systems.

  3. Determinants of the level of knwoledge application: a knowledge-based and information-processing perspective

    NARCIS (Netherlands)

    Song, X.M.; Bij, van der J.D.; Weggeman, M.C.D.P.

    2005-01-01

    Knowledge application is of key importance in the development of successful new products. Knowledge application refers to an organization's timely response to technological change by utilizing the knowledge and technology generated into new products and processes. This study uses the knowledge-based

  4. Risk Management of New Microelectronics for NASA: Radiation Knowledge-base

    Science.gov (United States)

    LaBel, Kenneth A.

    2004-01-01

    Contents include the following: NASA Missions - implications to reliability and radiation constraints. Approach to Insertion of New Technologies Technology Knowledge-base development. Technology model/tool development and validation. Summary comments.

  5. Do social networks and technological capabilities help knowledge management?

    Directory of Open Access Journals (Sweden)

    Encarnación García-Sánchez

    2017-12-01

    Full Text Available Dynamic capabilities are currently becoming an important extension of the theory of resources and capabilities that enables companies to adapt better in the current competitive environment. This paper examines how knowledge management, a dynamic function related to management or administration of a set of knowledge flows, develops thanks to the greater dynamism of social networks. It then shows how this relationship is especially strengthened by different technological capabilities. To achieve these goals, the paper examines the main tools that permit companies to develop an ability to achieve competitive advantage relative to the technological capabilities of managers and workers, social networks and knowledge management.

  6. Exploring Preschool Teachers' Technological Pedagogical Content Knowledge of Educational Games

    Science.gov (United States)

    Hsu, Chung-Yuan; Liang, Jyh-Chong; Chai, Ching-Sing; Tsai, Chin-Chung

    2013-01-01

    Current technological pedagogical content knowledge (TPACK) studies are inclined to treat technology in a general manner, an approach which may not be able to provide adequate guidelines to improve teacher preparation and professional development when teaching with games. This study developed two new questionnaires, namely the Technological…

  7. "Learning to Assess" and "Assessing to Learn": The Construction of Knowledge about Assistive Technology

    Science.gov (United States)

    Folkes, Clare; Carmichael, Patrick

    2006-01-01

    A key role in the development and deployment of Assistive Technology solutions is that of the "assessor-consultant". Assessor-consultants for the UK-based charity Abilitynet work with clients to develop customized computer-based assistive technology systems and draw on a range of shared knowledge from the assessor-consultant community.…

  8. Analysis of the relation between knowledge engineering and knowledge management based on the Nonaka and Takeuchi models

    Directory of Open Access Journals (Sweden)

    Christian Reyes

    2007-07-01

    Full Text Available The use of the Knowledge Management is fundamental in the creation of value within the companies, being at the present time a new form to obtain competitive advantages in specific market. Also, for the process of value creation is necessary to use specifics Information Technologies that they allow to reach the objectives drawn up when implementing a Knowledge Management project. In this sense, one of the more complete and efficient Information Technologies is the Knowledge Based System that as well comprises of the Knowledge Engineering. This article tries to analyze the existing relation between Knowledge Management, a specific model of knowledge creation, the Knowledge Based System and how this Information Technologies play a very important role in the creation, codification and transference of knowledge.

  9. From conventional software based systems to knowledge based systems

    International Nuclear Information System (INIS)

    Bologna, S.

    1995-01-01

    Even if todays nuclear power plants have a very good safety record, there is a continuous search for still improving safety. One direction of this effort address operational safety, trying to improve the handling of disturbances and accidents partly by further automation, partly by creating a better control room environment, providing the operator with intelligent support systems to help in the decision making process. Introduction of intelligent computerised operator support systems has proved to be an efficient way of improving the operators performance. A number of systems have been developed worldwide, assisting in tasks like process fault detection and diagnosis, selection and implementation of proper remedial actions. Unfortunately, the use of Knowledge Based Systems (KBSs), introduces a new dimension to the problem of the licensing process. KBSs, despite the different technology employed, are still nothing more than a computer program. Unfortunately, quite a few people building knowledge based systems seem to ignore the many good programming practices that have evolved over the years for producing traditional computer programs. In this paper the author will try to point out similarities and differences between conventional software based systems, and knowledge based systems, introducing also the concept of model based reasoning. (orig.) (25 refs., 2 figs.)

  10. Automatic Knowledge Base Evolution by Learning Instances

    OpenAIRE

    Kim, Sundong

    2016-01-01

    Knowledge base is the way to store structured and unstructured data throughout the web. Since the size of the web is increasing rapidly, there are huge needs to structure the knowledge in a fully automated way. However fully-automated knowledge-base evolution on the Semantic Web is a major challenges, although there are many ontology evolution techniques available. Therefore learning ontology automatically can contribute to the semantic web society significantly. In this paper, we propose ful...

  11. Knowledge management as an element in realizing nuclear technology

    International Nuclear Information System (INIS)

    Schmatjko, K.J.

    2007-01-01

    Full text: A company is not defined by its competences but it lives in realizing these competences in products. The technical knowledge within the field, i.e. here in nuclear technology, is taken as granted at a first glance. For analyzing the role of knowledge management (KM) in the application this knowledge for our products, one can follow two different dimensions, thereby elucidating the needs and development requirements for KM methods: When first considering the 'operational' dimension, one can start from the scope of the manufacturer's knowledge which covers the construction of plants, then accompanying its life cycle, and pursues the development of the technology for the future. A board spectrum of KM activities has been established yet for these different phases, comprising tools with close product orientation or KM elements applied in 'support processes'. In cases of close KM integration in the business process, diversity over the different sectors of the company has emerged: 'locally' optimized solutions are favoured due to specific requirements of the technical field, to continuity or to ease of daily application. On the other hand, 'global' KM tools are often preferred for integration in 'global' support processes (as human resource (HR) management). This can be illustrated by some examples deployed yet, and their benefit: 1. Feedback procedures for new plant projects: capturing the experience during construction (e.g. by standardised reports), thereby strengthening quality criteria for the project and integrating evaluation into the project management (PM) process of the current project; thus reducing erection time - and related capital cost - for future plants. 2. Follow up event information on nuclear plants globally: by collecting and assessing events systematically for proactive technical action and as input for quality management (QM); thus identifying market needs in advance also. 3. IT based KM tool used in nuclear maintenance service

  12. A knowledge base browser using hypermedia

    Science.gov (United States)

    Pocklington, Tony; Wang, Lui

    1990-01-01

    A hypermedia system is being developed to browse CLIPS (C Language Integrated Production System) knowledge bases. This system will be used to help train flight controllers for the Mission Control Center. Browsing this knowledge base will be accomplished either by having navigating through the various collection nodes that have already been defined, or through the query languages.

  13. Drug knowledge bases and their applications in biomedical informatics research.

    Science.gov (United States)

    Zhu, Yongjun; Elemento, Olivier; Pathak, Jyotishman; Wang, Fei

    2018-01-03

    Recent advances in biomedical research have generated a large volume of drug-related data. To effectively handle this flood of data, many initiatives have been taken to help researchers make good use of them. As the results of these initiatives, many drug knowledge bases have been constructed. They range from simple ones with specific focuses to comprehensive ones that contain information on almost every aspect of a drug. These curated drug knowledge bases have made significant contributions to the development of efficient and effective health information technologies for better health-care service delivery. Understanding and comparing existing drug knowledge bases and how they are applied in various biomedical studies will help us recognize the state of the art and design better knowledge bases in the future. In addition, researchers can get insights on novel applications of the drug knowledge bases through a review of successful use cases. In this study, we provide a review of existing popular drug knowledge bases and their applications in drug-related studies. We discuss challenges in constructing and using drug knowledge bases as well as future research directions toward a better ecosystem of drug knowledge bases. © The Author(s) 2018. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  14. Effects of Information Technologies, Department Characteristics and Individual Roles on Improving Knowledge Sharing Visibility: A Qualitative Case Study

    Science.gov (United States)

    Zhang, Xi; Vogel, Douglas R.; Zhou, Zhongyun

    2012-01-01

    Knowledge sharing visibility (KSV) is a critical environmental factor which can reduce social loafing in knowledge sharing (KS). This is especially true in ICT [information and communication technology]-based KS in learning organisations. As such, it is imperative that we better understand how to design technology enabled knowledge management…

  15. Reframing the role of knowledge parks and science cities in knowledge-based urban development

    NARCIS (Netherlands)

    Benneworth, Paul Stephen; Ratinho, Tiago

    2014-01-01

    Knowledge-based urban developments (KBUDs) are an increasingly common element of urban planning and strategy making: policy makers and developers set out to stimulate economic prosperity by promoting the integration and concentration of research, technology, and human capital. But KBUD is, by its

  16. Using Modern Technologies to Capture and Share Indigenous Astronomical Knowledge

    Science.gov (United States)

    Nakata, Martin; Hamacher, Duane W.; Warren, John; Byrne, Alex; Pagnucco, Maurice; Harley, Ross; Venugopal, Srikumar; Thorpe, Kirsten; Neville, Richard; Bolt, Reuben

    2014-06-01

    Indigenous Knowledge is important for Indigenous communities across the globe and for the advancement of our general scientific knowledge. In particular, Indigenous astronomical knowledge integrates many aspects of Indigenous Knowledge, including seasonal calendars, navigation, food economics, law, ceremony, and social structure. Capturing, managing, and disseminating this knowledge in the digital environment poses a number of challenges, which we aim to address using a collaborative project emerging between experts in the higher education, library, archive and industry sectors. Using Microsoft's WorldWide Telescope and Rich Interactive Narratives technologies, we propose to develop software, media design, and archival management solutions to allow Indigenous communities to share their astronomical knowledge with the world on their terms and in a culturally sensitive manner.

  17. Refining Automatically Extracted Knowledge Bases Using Crowdsourcing

    Directory of Open Access Journals (Sweden)

    Chunhua Li

    2017-01-01

    Full Text Available Machine-constructed knowledge bases often contain noisy and inaccurate facts. There exists significant work in developing automated algorithms for knowledge base refinement. Automated approaches improve the quality of knowledge bases but are far from perfect. In this paper, we leverage crowdsourcing to improve the quality of automatically extracted knowledge bases. As human labelling is costly, an important research challenge is how we can use limited human resources to maximize the quality improvement for a knowledge base. To address this problem, we first introduce a concept of semantic constraints that can be used to detect potential errors and do inference among candidate facts. Then, based on semantic constraints, we propose rank-based and graph-based algorithms for crowdsourced knowledge refining, which judiciously select the most beneficial candidate facts to conduct crowdsourcing and prune unnecessary questions. Our experiments show that our method improves the quality of knowledge bases significantly and outperforms state-of-the-art automatic methods under a reasonable crowdsourcing cost.

  18. Refining Automatically Extracted Knowledge Bases Using Crowdsourcing.

    Science.gov (United States)

    Li, Chunhua; Zhao, Pengpeng; Sheng, Victor S; Xian, Xuefeng; Wu, Jian; Cui, Zhiming

    2017-01-01

    Machine-constructed knowledge bases often contain noisy and inaccurate facts. There exists significant work in developing automated algorithms for knowledge base refinement. Automated approaches improve the quality of knowledge bases but are far from perfect. In this paper, we leverage crowdsourcing to improve the quality of automatically extracted knowledge bases. As human labelling is costly, an important research challenge is how we can use limited human resources to maximize the quality improvement for a knowledge base. To address this problem, we first introduce a concept of semantic constraints that can be used to detect potential errors and do inference among candidate facts. Then, based on semantic constraints, we propose rank-based and graph-based algorithms for crowdsourced knowledge refining, which judiciously select the most beneficial candidate facts to conduct crowdsourcing and prune unnecessary questions. Our experiments show that our method improves the quality of knowledge bases significantly and outperforms state-of-the-art automatic methods under a reasonable crowdsourcing cost.

  19. Development of a Knowledge Base for Enduser Consultation of AAL-Systems.

    Science.gov (United States)

    Röll, Natalie; Stork, Wilhelm; Rosales, Bruno; Stephan, René; Knaup, Petra

    2016-01-01

    Manufacturer information, user experiences and product availability of assistive living technologies are usually not known to citizens or consultation centers. The different knowledge levels concerning the availability of technology shows the need for building up a knowledge base. The aim of this contribution is the definition of requirements in the development of knowledge bases for AAL consultations. The major requirements, such as a maintainable and easy to use structure were implemented into a web based knowledge base, which went productive in ~3700 consulting interviews of municipal technology information centers. Within this field phase the implementation of the requirements for a knowledge base in the field of AAL consulting was evaluated and further developed.

  20. Utilisation of information technology to support information and knowledge management by lawyers in Polokwane City

    Directory of Open Access Journals (Sweden)

    Solomon Bopape

    2010-01-01

    Full Text Available A revolution in information and communication technology is taking place in the world. With this technological revolution, information and knowledge are also considered as crucial assets for every organization. Law firms are regarded as one of the industries which are information and knowledge-intensive. The utilization of information technology can play an essential role in supporting information and knowledge management in law firms. An investigation into the extent to which lawyers or law firms in Polokwane city utilize information technology to support information and knowledge management was conducted through a survey questionnaire based on the Technology Acceptance Model. The findings of this research showed that lawyers utilise information technology systems or applications that are common, such as word processing, e-mail, client billing and online databases for searching legal information. Other information and knowledge management tools, such as Intranets, extranets and web portals, were the least and non-utilised applications by these lawyers. The main reason for non-utilization of such systems may be linked to non- exposure to information technology and unfamiliarity with information and knowledge management tools. It is, therefore, recommended that legal schools should include, in their curriculum, modules on the application and role of information technology in the legal practice. Recommendations for future research related to this subject are also provided.

  1. Knowledge about knowledge[Technology innovation in petroleum industry]; Kunnskap om kunnskap

    Energy Technology Data Exchange (ETDEWEB)

    Ramm, Hans Henrik

    2006-07-01

    Technology and knowledge make up the knowledge capital that has been so essential to the oil and gas industry's value creation, competitiveness and internationalization. Report prepared for the Norwegian Oil Industry Association (OLF) and The Norwegian Society of Chartered Technical and Scientific Professionals (Tekna), on the Norwegian petroleum cluster as an environment for creating knowledge capital from human capital, how fiscal and other framework conditions may influence the building of knowledge capital, the long-term perspectives for the petroleum cluster, what Norwegian society can learn from the experiences in the petroleum cluster, and the importance of gaining more knowledge about the functionality of knowledge for increased value creation (author) (ml)

  2. Cultural and Rhetorical Bases for communicating knowledge in web based communities

    DEFF Research Database (Denmark)

    Kampf, Constance; Kommers, Piet

    2008-01-01

    Cultural and Rhetorical Bases for communicating knowledge in web based communities How can we extend learner-centred theories for educational technology to include, for instance, the cultural and rhetorical backgrounds which influence participants in online communities as they engage in knowledge...... via web-based communities the intersection of culture and rhetoric in web-based communication rhetoric and discourse in the process of communicating knowledge via technology heuristics for knowledge communication from teaching in online forums connections between identity and knowledge communication...... This call for papers invites papers focused on theoretical frameworks or empirical research which highlights the cultural and/or rhetorical aspects of communicating knowledge in web based communities. We are looking for work that brings together methods and perspectives across disciplines...

  3. Community-based knowledge translation: unexplored opportunities

    Directory of Open Access Journals (Sweden)

    Armstrong Rebecca

    2011-06-01

    Full Text Available Abstract Background Knowledge translation is an interactive process of knowledge exchange between health researchers and knowledge users. Given that the health system is broad in scope, it is important to reflect on how definitions and applications of knowledge translation might differ by setting and focus. Community-based organizations and their practitioners share common characteristics related to their setting, the evidence used in this setting, and anticipated outcomes that are not, in our experience, satisfactorily reflected in current knowledge translation approaches, frameworks, or tools. Discussion Community-based organizations face a distinctive set of challenges and concerns related to engaging in the knowledge translation process, suggesting a unique perspective on knowledge translation in these settings. Specifically, community-based organizations tend to value the process of working in collaboration with multi-sector stakeholders in order to achieve an outcome. A feature of such community-based collaborations is the way in which 'evidence' is conceptualized or defined by these partners, which may in turn influence the degree to which generalizable research evidence in particular is relevant and useful when balanced against more contextually-informed knowledge, such as tacit knowledge. Related to the issues of evidence and context is the desire for local information. For knowledge translation researchers, developing processes to assist community-based organizations to adapt research findings to local circumstances may be the most helpful way to advance decision making in this area. A final characteristic shared by community-based organizations is involvement in advocacy activities, a function that has been virtually ignored in traditional knowledge translation approaches. Summary This commentary is intended to stimulate further discussion in the area of community-based knowledge translation. Knowledge translation, and exchange

  4. Knowledge Discovery and Intensive Management of Manufacturing enterprise Based on Data Mining Technology%基于数据挖掘技术的制造企业工艺知识发现和集约化管理

    Institute of Scientific and Technical Information of China (English)

    王茨; 彭静; 刘雁; 杨素明

    2016-01-01

    A great deal of useful knowledge and law were hidden in lots of experience,case data in the process of design and production everyday. These knowledge would be wasted if these data were just stored in computers or work packages. In this paper,one knowledge discovery based rough set theory on was proposed. Combined with a case,three pieces of knowledge were dug from 25 production data. the result showed that the way was valid. The data digging technology could help enterprises to realize the knowledge fully dug up and intensive management to avoid that the enterprise had a great volume of data but no useful knowledge,and improved the core competitiveness of the company.%制造型企业在日常设计、生产过程中,积累了大量的经验、案例和设计生产数据。为挖掘这些数据中的有用知识和规律,实现知识的充分挖掘和集约化管理,提升企业的核心竞争力,提出一种基于粗糙集的工艺知识发现技术,并通过具体算例从25条生产数据中挖掘出3条知识,结果显示:该方法是有效的。

  5. Socially Relevant Knowledge Based Telemedicine

    Science.gov (United States)

    2010-10-01

    in the field of education as well. Advantage (s) of training in virtual worlds The most important advantage of use of computer based...Shirmohammadi, S. (2007). Accessibility and scalability in collaborative eCommerce environments. Digital Information Management, 2007. ICDIM 󈧋. 2nd...methods on human effort has certain advantages and disadvantages. The main advantage is that human-intensive methods usually yield data that are of high

  6. Community-based health insurance knowledge, concern ...

    African Journals Online (AJOL)

    Community-based health insurance knowledge, concern, preferences, and financial planning for health care among informal sector workers in a health district of Douala, Cameroon. ... This is mainly due to the lack of awareness and limited knowledge on the basic concepts of a CBHI by this target population. Solidarity ...

  7. A Review of Gamification in Technological Pedagogical Content Knowledge

    Science.gov (United States)

    Prabawa, H. W.

    2017-02-01

    This paper review 10 papers that relating to gamification adoption in developing technological pedagogical content knowledge (TPACK) framework. Technological developments lately led to the trend of increased use of ICT in the learning process, one of which is gamification. Gamification is the concept of applying game mechanics and game design techniques to engage and motivate people to achieve their goals. Gamification in education as an intersection of learning and fun. The problem is that not all game’s attributes suitable for use in presents a teaching material. TPACK is a framework for the teacher that described a complex interaction among three bodies of knowledge : content, pedagogy and technology. TPACK engagement has an impact on the teacher mastery in dimension of teaching material content, in addition to improve teachers skill in developing technology in classroom learning.

  8. Technology and knowledge flow the power of networks

    CERN Document Server

    Trentin, Guglielmo

    2011-01-01

    This book outlines how network technology can support, foster and enhance the Knowledge Management, Sharing and Development (KMSD) processes in professional environments through the activation of both formal and informal knowledge flows. Understanding how ICT can be made available to such flows in the knowledge society is a factor that cannot be disregarded and is confirmed by the increasing interest of companies in new forms of software-mediated social interaction. The latter factor is in relation both to the possibility of accelerating internal communication and problem solving processes, an

  9. Knowledge-Based Environmental Context Modeling

    Science.gov (United States)

    Pukite, P. R.; Challou, D. J.

    2017-12-01

    As we move from the oil-age to an energy infrastructure based on renewables, the need arises for new educational tools to support the analysis of geophysical phenomena and their behavior and properties. Our objective is to present models of these phenomena to make them amenable for incorporation into more comprehensive analysis contexts. Starting at the level of a college-level computer science course, the intent is to keep the models tractable and therefore practical for student use. Based on research performed via an open-source investigation managed by DARPA and funded by the Department of Interior [1], we have adapted a variety of physics-based environmental models for a computer-science curriculum. The original research described a semantic web architecture based on patterns and logical archetypal building-blocks (see figure) well suited for a comprehensive environmental modeling framework. The patterns span a range of features that cover specific land, atmospheric and aquatic domains intended for engineering modeling within a virtual environment. The modeling engine contained within the server relied on knowledge-based inferencing capable of supporting formal terminology (through NASA JPL's Semantic Web for Earth and Environmental Technology (SWEET) ontology and a domain-specific language) and levels of abstraction via integrated reasoning modules. One of the key goals of the research was to simplify models that were ordinarily computationally intensive to keep them lightweight enough for interactive or virtual environment contexts. The breadth of the elements incorporated is well-suited for learning as the trend toward ontologies and applying semantic information is vital for advancing an open knowledge infrastructure. As examples of modeling, we have covered such geophysics topics as fossil-fuel depletion, wind statistics, tidal analysis, and terrain modeling, among others. Techniques from the world of computer science will be necessary to promote efficient

  10. Composing the Layer of Knowledge of Digital Technology in Architecture

    Directory of Open Access Journals (Sweden)

    Johanes Mikhael

    2018-01-01

    Full Text Available The use of digital tools in architectural practice has been evolving significantly. In following such developments, architectural practice has been incorporating digital technology not only to meet the current demand but also to pursue the vast amount of possibilities ahead. However, the integration of digital technology in architectural knowledge has been reasonably operative that produces uncritical understanding, and it tends to put architects as a passive user of technology. This paper argues that there are layers of knowledge that nees to be acknowledged and nourished accordingly in embracing the use of computation tools yet avoiding the overly simplistic.understanding. It attempts to explore the methods of digital technology in archietctural design practices as well as dicussions that follow to create a critical evaluation of its roles and potentials. The review is conducted theoretically in which the use of digital in the design process is explored in such a way to reveal its importance in architectural design methods. The review also crosses beyond the disciplines of architecture to construct more comprehensive understanding that bridges the logic of digital technology and architecture. The resulted map of methods of the digital thus can be used to develop a framework for digital discourse that bridge the operative knowledge of technology to the more critical perspectives.

  11. Knowledge based economy: The role of expert diaspora

    Directory of Open Access Journals (Sweden)

    Filipović Jovan

    2012-01-01

    Full Text Available Diasporas stand out as an economic or cultural avant-garde of transformation. This is especially true for academic and other intellectual Diaspora communities, because science and knowledge creation are global enterprises. Proclivity of knowledge workers to move in order to improve and absorb transnational knowledge through Diaspora networks might be an essential quality of an emerging national economy of a developing country. The article treats the role of expert Diaspora in knowledge based economy, innovation and talent management. Besides presenting the essentials of knowledge based economy and innovation, it discusses the role of expert Diaspora in science, technology and innovation (STI capacity building. Also, the article emphasizes the importance of leadership for talent and its implications for Diaspora. Using WEF statistics, it illustrates negative consequences of the sad policy of “Chaseaway the brightest and the best” for innovative capacity, competitiveness, and prosperity of nations.

  12. Process fault diagnosis using knowledge-based systems

    International Nuclear Information System (INIS)

    Sudduth, A.L.

    1991-01-01

    Advancing technology in process plants has led to increased need for computer based process diagnostic systems to assist the operator. One approach to this problem is to use an embedded knowledge based system to interpret measurement signals. Knowledge based systems using only symptom based rules are inadequate for real time diagnosis of dynamic systems; therefore a model based approach is necessary. Though several forms of model based reasoning have been proposed, the use of qualitative causal models incorporating first principles knowledge of process behavior structure, and function appear to have the most promise as a robust modeling methodology. In this paper the structure of a diagnostic system is described which uses model based reasoning and conventional numerical methods to perform process diagnosis. This system is being applied to emergency diesel generator system in nuclear stations

  13. A randomized controlled trial to evaluate the Make Safe Happen® app-a mobile technology-based safety behavior change intervention for increasing parents' safety knowledge and actions.

    Science.gov (United States)

    McKenzie, Lara B; Roberts, Kristin J; Clark, Roxanne; McAdams, Rebecca; Abdel-Rasoul, Mahmoud; Klein, Elizabeth G; Keim, Sarah A; Kristel, Orie; Szymanski, Alison; Cotton, Christopher G; Shields, Wendy C

    2018-03-12

    Many unintentional injuries that occur in and around the home can be prevented through the use of safety equipment and by consistently following existing safety recommendations. Unfortunately, uptake of these safety behaviors is unacceptably low. This paper describes the design of the Make Safe Happen® smartphone application evaluation study, which aims to evaluate a mobile technology-based safety behavior change intervention on parents' safety knowledge and actions. Make Safe Happen® app evaluation study is a randomized controlled trial. Participants will be parents of children aged 0-12 years who are recruited from national consumer online survey panels. Parents will complete a pretest survey, and will be randomized to receive the Make Safe Happen® app or a non-injury-related app, and then complete a posttest follow-up survey after 1 week. Primary outcomes are: (1) safety knowledge; (2) safety behaviors; (3) safety device acquisition and use, and (4) behavioral intention to take safety actions. Anticipated study results are presented. Wide-reaching interventions, to reach substantial parent and caregiver audiences, to effectively reduce childhood injuries are needed. This study will contribute to the evidence-base about how to increase safety knowledge and actions to prevent home-related injuries in children. NCT02751203 ; Pre-results.

  14. Knowledge management, health information technology and nurses' work engagement.

    Science.gov (United States)

    Hendriks, Paul H J; Ligthart, Paul E M; Schouteten, Roel L J

    2016-01-01

    Knowledge management (KM) extends the health information technology (HIT) literature by addressing its impact on creating knowledge by sharing and using the knowledge of health care professionals in hospitals. The aim of the study was to provide insight into how HIT affects nurses' explicit and tacit knowledge of their ongoing work processes and work engagement. Data were collected from 74 nurses in four wards of a Dutch hospital via a paper-and-pencil survey using validated measurement instruments. In a quasiexperimental research design, HIT was introduced in the two experimental wards in contrast to the two control wards. At the time of the HIT introduction, a pretest was administered in all four wards and was followed by a posttest after 3 months. Data were analyzed via partial least squares modeling. Generally, nurses' tacit knowledge (i.e., their insight into and their capacity to make sense of the work processes) appears to be a significant and strong predictor of their work engagement. In contrast, nurses' explicit knowledge (i.e., information feedback about patients and tasks) only indirectly affects work engagement via its effect on tacit knowledge. Its effect on work engagement therefore depends on the mediating role of tacit knowledge. Interestingly, introducing HIT significantly affects only nurses' explicit knowledge, not their tacit knowledge or work engagement. Nurses' tacit and explicit knowledge needs to be systematically distinguished when implementing HIT/KM programs to increase work engagement in the workplace. Tacit knowledge (insight into work processes) appears to be pivotal, whereas efforts aimed only at improving available information will not lead to a higher level of work engagement in nurses' work environments.

  15. The Coming of Knowledge-Based Business.

    Science.gov (United States)

    Davis, Stan; Botkin, Jim

    1994-01-01

    Economic growth will come from knowledge-based businesses whose "smart" products filter and interpret information. Businesses will come to think of themselves as educators and their customers as learners. (SK)

  16. Toward equality of biodiversity knowledge through technology transfer.

    Science.gov (United States)

    Böhm, Monika; Collen, Ben

    2015-10-01

    To help stem the continuing decline of biodiversity, effective transfer of technology from resource-rich to biodiversity-rich countries is required. Biodiversity technology as defined by the Convention on Biological Diversity (CBD) is a complex term, encompassing a wide variety of activities and interest groups. As yet, there is no robust framework by which to monitor the extent to which technology transfer might benefit biodiversity. We devised a definition of biodiversity technology and a framework for the monitoring of technology transfer between CBD signatories. Biodiversity technology within the scope of the CBD encompasses hard and soft technologies that are relevant to the conservation and sustainable use of biodiversity, or make use of genetic resources, and that relate to all aspects of the CBD, with a particular focus on technology transfer from resource-rich to biodiversity-rich countries. Our proposed framework introduces technology transfer as a response indicator: technology transfer is increased to stem pressures on biodiversity. We suggest an initial approach of tracking technology flow between countries; charting this flow is likely to be a one-to-many relationship (i.e., the flow of a specific technology from one country to multiple countries). Future developments should then focus on integrating biodiversity technology transfer into the current pressure-state-response indicator framework favored by the CBD (i.e., measuring the influence of technology transfer on changes in state and pressure variables). Structured national reporting is important to obtaining metrics relevant to technology and knowledge transfer. Interim measures, that can be used to assess biodiversity technology or knowledge status while more in-depth indicators are being developed, include the number of species inventories, threatened species lists, or national red lists; databases on publications and project funding may provide measures of international cooperation. Such a

  17. Methodology for testing and validating knowledge bases

    Science.gov (United States)

    Krishnamurthy, C.; Padalkar, S.; Sztipanovits, J.; Purves, B. R.

    1987-01-01

    A test and validation toolset developed for artificial intelligence programs is described. The basic premises of this method are: (1) knowledge bases have a strongly declarative character and represent mostly structural information about different domains, (2) the conditions for integrity, consistency, and correctness can be transformed into structural properties of knowledge bases, and (3) structural information and structural properties can be uniformly represented by graphs and checked by graph algorithms. The interactive test and validation environment have been implemented on a SUN workstation.

  18. Mobile Communication and Work Practices in Knowledge-based Organizations

    Directory of Open Access Journals (Sweden)

    Pertti Hurme

    2005-01-01

    Full Text Available This paper examines the role of mobile communication, mobile tools and work practices in the context of organizations, especially knowledge-based organizations. Today, organizations are highly complex and diverse. Not surprisingly, various solutions to incorporating mobile tools and mobile communication in organizations have been devised. Challenges to technological development and research on mobile communication are presented.

  19. Enhancing Canadian Civil Society Research and Knowledge-Based ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Enhancing Canadian Civil Society Research and Knowledge-Based Practice in a Rapidly Changing Landscape for International Development ... Women in the developing world continue to face obstacles that limit their ability to establish careers and become leaders in the fields of science, technology, engineering, and ...

  20. Scientific publications in XML - towards a global knowledge base

    Directory of Open Access Journals (Sweden)

    Peter Murray-Rust

    2006-01-01

    Full Text Available Recent developments on the World-Wide Web provide an unparalleled opportunity to revolutionise scientific, technical and medical publication. The technology exists for the scientific world to use primary publication to create a knowledge base, or Semantic Web, with a potential greatly beyond the paper archives and electronic databases of today.

  1. Knowledge and use of information and communication technology ...

    African Journals Online (AJOL)

    Knowledge and use of information and communication technology by health sciences students of the University of Ghana. ... It brings about an opportunity to introduce ICT in healthcare delivery to them. This will ensure their adequate preparedness to embrace new ways of delivering care to improve service delivery.

  2. Strategic Evaluation of University Knowledge and Technology Transfer Effectiveness

    Science.gov (United States)

    Tran, Thien Anh

    2013-01-01

    Academic knowledge and technology transfer has been growing in importance both in academic research and practice. A critical question in managing this activity is how to evaluate its effectiveness. The literature shows an increasing number of studies done to address this question; however, it also reveals important gaps that need more research.…

  3. Design concept of a knowledge management system of geological disposal technology

    International Nuclear Information System (INIS)

    Osawa, Hideaki; Umeki, Hiroyuki; Makino, Hitoshi; Takase, H.; Mckinley, I.G.; Okubo, H.

    2008-01-01

    JAEA is developing a 'Knowledge Management System' for vast quantities of data or information arising from various sources relevant to the geological disposal programs in Japan. The geological disposal project is taking a stepwise approach to selecting a disposal site and, to the approval and licensing, construction, operation and closure of a repository. It is a long-term project required approximately 100 years. In this paper, in order to structuralize, as knowledge, the results of R and D on geological disposal technologies of high-level radioactive wastes, the knowledge management approach was first reviewed. The paper is followed by descriptions of the technical characteristics, procedure to carry out a plan, and education of geological disposal technologies such as knowledge management etc. The structuring of the knowledge base and the knowledge management system including the construction of safety case were described. (S. Ohno)

  4. Health information technology knowledge and skills needed by HIT employers.

    Science.gov (United States)

    Fenton, S H; Gongora-Ferraez, M J; Joost, E

    2012-01-01

    To evaluate the health information technology (HIT) workforce knowledge and skills needed by HIT employers. Statewide face-to-face and online focus groups of identified HIT employer groups in Austin, Brownsville, College Station, Dallas, El Paso, Houston, Lubbock, San Antonio, and webinars for rural health and nursing informatics. HIT employers reported needing an HIT workforce with diverse knowledge and skills ranging from basic to advanced, while covering information technology, privacy and security, clinical practice, needs assessment, contract negotiation, and many other areas. Consistent themes were that employees needed to be able to learn on the job and must possess the ability to think critically and problem solve. Many employers wanted persons with technical skills, yet also the knowledge and understanding of healthcare operations. The HIT employer focus groups provided valuable insight into employee skills needed in this fast-growing field. Additionally, this information will be utilized to develop a statewide HIT workforce needs assessment survey.

  5. KM Tools and Technologies that Share Distribute Knowledge

    Directory of Open Access Journals (Sweden)

    Ileana Hauer

    2008-10-01

    Full Text Available The exponential increase in information, primarily due to the electronic capture of data and its storage in vast data warehouses, has created a demand for analyzing the large amount of data generated by today’s organizations so that enterprise can respond quickly to fast changing markets. There are various tools and technologies that can be used to share and distribute knowledge, include e-mail, groupware, data mining ,expert systems and others. The paper outlines these technologies, which dominate the technical tools for sharing knowledge from an organizations data assets and finally. The case study, an Expert System, use expert knowledge to attain highlevel decision performance in a narrow domain.

  6. Managing knowledge: a technology transfer case study in IEN

    International Nuclear Information System (INIS)

    Pereira, Ana Gabriella Amorim Abreu

    2009-01-01

    Knowledge management is paramount nowadays. In order to enable the members of an organization to deal with their current situations effectively it is mandatory to know and enhance its intellectual capital. Managing the organization knowledge is important to the extent that it allows and reinforce its mission (what we are trying to accomplish?), and performance (how do we deliver the results?). As a result of a knowledge management effort, the organization can create value for itself and for society as a whole. In this paper, we argue that a technology developed at a research institute and transferred to an industry is knowledge to be managed in order to create value, both for the society and for the Institute. In order to manage such knowledge, it is proposed an approach to enhance the value creation potential of a technology transfer. This paper propose an investigation to expand the understanding on how a public research institute and a private firm could introduce their value creation wishes into a technology transfer agreement in a way to reflect and provide the realization of those wishes. It is proposed that, from the identification of the organizations expectations it is possible to infer which agreement attributes will contribute to that value creation and to establish satisfactory agreement configurations. These configurations have the potential to generate those consequences, given that, through the transfer, each organization seeks to increase potential benefits and to reduce potential sacrifices. Supported by exchange flow and value creation models, by the knowledge management and the means-end theory, an approach to increase the value creation potential of a technology transfer is proposed. Evidences from a case study sustain the proposed approach. The case study unity is the Instituto de Engenharia Nuclear, a public research institute. (author)

  7. Digital Stories as a Method for Evidence-Based Practice and Knowledge Co-Creation in Technology-Enhanced Learning for Children with Autism

    Science.gov (United States)

    Parsons, Sarah; Guldberg, Karen; Porayska-Pomsta, Kaska; Lee, Rachael

    2015-01-01

    Storytelling is a powerful means of expression especially for voices that may be difficult to hear or represent in typical ways. This paper reports and reflects on our experiences of co-creating digital stories with school practitioners in a project focusing on embedding innovative technologies for children on the autism spectrum in classroom…

  8. Sharing knowledge, shaping Europe US technological collaboration and nonproliferation

    CERN Document Server

    Krige, John

    2016-01-01

    In the 1950s and the 1960s, U.S. administrations were determined to prevent Western European countries from developing independent national nuclear weapons programs. To do so, the United States attempted to use its technological pre-eminence as a tool of “soft power” to steer Western European technological choices toward the peaceful uses of the atom and of space, encouraging options that fostered collaboration, promoted nonproliferation, and defused challenges to U.S. technological superiority. In Sharing Knowledge, Shaping Europe, John Krige describes these efforts and the varying degrees of success they achieved. Krige explains that the pursuit of scientific and technological leadership, galvanized by America’s Cold War competition with the Soviet Union, was also used for techno-political collaboration with major allies. He examines a series of multinational arrangements involving shared technological platforms and aimed at curbing nuclear proliferation, and he describes the roles of the Department ...

  9. "THE KNOWLEDGE TRIANGLE" IN A KNOWLEDGE-BASED SOCIETY

    Directory of Open Access Journals (Sweden)

    Rus Mircea-Iosif

    2013-07-01

    Full Text Available The knowledge-based society is the stage where mankind is found and aims to raise the living standards of population but also to increase the level of knowledge. To achieve this latter goal, the states of the world, and especially those in the European Union, must ensure an adequate funding for its realization, and therefore in 2011 it was decided at EU level the achievement of an Innovation Union, in which are to be involved all the European countries, while to stimulate and finance research and innovation the Horizon 2020 program was proposed. The results of the Program, an ”Innovation Union” have begun to be felt, so in 2011, the major companies headquartered in the European Union increased their investments in R&D by 8.9% compared to 6.1% in 2010. This increase was almost equal to that of the U.S.A. companies (9%, higher than the world average (7.6% and superior to Japanese companies (1.5%. The sectors that used the research-development activity have tended to have increases in employment above average. I believe this information highlights the fact that the European Union may become attractive for research-development and innovation investments even for businesses outside the UE, and this can result in jobs creation and increasing competitivenees of this field of the states of the European Union. In the introductory part of the article, I have briefly presented general notions of the three component activities of the ”knowledge triangle”, in the second part I presented the knowledge society with several features, in the third part, I showed some provisions of the program to stimulate research and innovation Horizon 2020, in the fourth part, I presented an innovation activity connection to private enterprise and entrepreneurial initiative stimulation in the field innovation, and the conclusions shows that research does not stop with achieving the objectives and finding the outcomes research, but is it the background for further

  10. New technology-based recruitment methods

    OpenAIRE

    Oksanen, Reija

    2018-01-01

    The transformation that recruitment might encounter due to big data analytics and artificial intelligence (AI) is particularly fascinating which is why this thesis focuses on the changes recruitment processes are and will be facing as new technological solutions are emerging. The aim and main objective of this study is to widen knowledge about new technology-based recruitment methods, focusing on how they are utilized by Finnish recruitment professionals and how the opportunities and risks th...

  11. Knowledge Based Help desk System in Nuclear Malaysia

    International Nuclear Information System (INIS)

    Mohamad Safuan Sulaiman; Abdul Muin Abdul Rahman; Norzalina Nasirudin; Khairiel Adyani Abdul Ghani; Abdul Aziz Mhd Ramli; Mohd Ashhar Khalid

    2012-01-01

    Knowledge based (K-based) Help desk system is a knowledge oriented web based system that provides support to business process of the technical service providers. It is a multi-centric system which focuses on end-users, technical workers and higher level management through utilization of knowledge which resides and grows within the system. The objectives of the system are to be a user-friendly, capture technical knowledge for efficient performance and educating users for self reliance. These were achieved through the improvement of the help desk business process and better management of technical knowledge. This system has been tested and implemented in Information Technology Center (IT), Engineering Division (BKJ) and Instrumentation and Automation Center (IAC) at the Malaysian Nuclear Agency (Nuclear Malaysia). Higher levels of user satisfaction and faster growth in technical knowledge repository have been recorded in the system. This paper describes the help desk system in the perspective of management of its technical knowledge contributing to strengthening organizational knowledge asset of Nuclear Malaysia as national nuclear research institution. (Author)

  12. Development of knowledge base system linked to material database

    International Nuclear Information System (INIS)

    Kaji, Yoshiyuki; Tsuji, Hirokazu; Mashiko, Shinichi; Miyakawa, Shunichi; Fujita, Mitsutane; Kinugawa, Junichi; Iwata, Shuichi

    2002-01-01

    The distributed material database system named 'Data-Free-Way' has been developed by four organizations (the National Institute for Materials Science, the Japan Atomic Energy Research Institute, the Japan Nuclear Cycle Development Institute, and the Japan Science and Technology Corporation) under a cooperative agreement in order to share fresh and stimulating information as well as accumulated information for the development of advanced nuclear materials, for the design of structural components, etc. In order to create additional values of the system, knowledge base system, in which knowledge extracted from the material database is expressed, is planned to be developed for more effective utilization of Data-Free-Way. XML (eXtensible Markup Language) has been adopted as the description method of the retrieved results and the meaning of them. One knowledge note described with XML is stored as one knowledge which composes the knowledge base. Since this knowledge note is described with XML, the user can easily convert the display form of the table and the graph into the data format which the user usually uses. This paper describes the current status of Data-Free-Way, the description method of knowledge extracted from the material database with XML and the distributed material knowledge base system. (author)

  13. A knowledge based system for plant diagnosis

    International Nuclear Information System (INIS)

    Motoda, H.; Yamada, N.; Yoshida, K.

    1984-01-01

    A knowledge based system for plant diagnosis is proposed in which both event-oriented and function-oriented knowledge are used. For the proposed system to be of practical use, these two types of knowledge are represented by mutually nested four frames, i.e. the component, causality, criteriality, and simulator frames, and production rules. The system provides fast inference capability for use as both a production system and a formal reasoning system, with uncertainty of knowledge taken into account in the former. Event-oriented knowledge is used in both diagnosis and guidance and function-oriented knowledge, in diagnosis only. The inference capability required is forward chaining in the former and resolution in the latter. The causality frame guides in the use of event-oriented knowledge, whereas the criteriality frame does so for function-oriented knowledge. Feedback nature of the plant requires the best first search algorithm that uses histories in the resolution process. The inference program is written in Lisp and the plant simulator and the process I/O control programs in Fortran. Fast data transfer between these two languages is realized by enhancing the memory management capability of Lisp to control the numerical data in the global memory. Simulation applications to a BWR plant demonstrated its diagnostic capability

  14. Knowledge-Based Object Detection in Laser Scanning Point Clouds

    Science.gov (United States)

    Boochs, F.; Karmacharya, A.; Marbs, A.

    2012-07-01

    Object identification and object processing in 3D point clouds have always posed challenges in terms of effectiveness and efficiency. In practice, this process is highly dependent on human interpretation of the scene represented by the point cloud data, as well as the set of modeling tools available for use. Such modeling algorithms are data-driven and concentrate on specific features of the objects, being accessible to numerical models. We present an approach that brings the human expert knowledge about the scene, the objects inside, and their representation by the data and the behavior of algorithms to the machine. This "understanding" enables the machine to assist human interpretation of the scene inside the point cloud. Furthermore, it allows the machine to understand possibilities and limitations of algorithms and to take this into account within the processing chain. This not only assists the researchers in defining optimal processing steps, but also provides suggestions when certain changes or new details emerge from the point cloud. Our approach benefits from the advancement in knowledge technologies within the Semantic Web framework. This advancement has provided a strong base for applications based on knowledge management. In the article we will present and describe the knowledge technologies used for our approach such as Web Ontology Language (OWL), used for formulating the knowledge base and the Semantic Web Rule Language (SWRL) with 3D processing and topologic built-ins, aiming to combine geometrical analysis of 3D point clouds, and specialists' knowledge of the scene and algorithmic processing.

  15. Bridging the gap: simulations meet knowledge bases

    Science.gov (United States)

    King, Gary W.; Morrison, Clayton T.; Westbrook, David L.; Cohen, Paul R.

    2003-09-01

    Tapir and Krill are declarative languages for specifying actions and agents, respectively, that can be executed in simulation. As such, they bridge the gap between strictly declarative knowledge bases and strictly executable code. Tapir and Krill components can be combined to produce models of activity which can answer questions about mechanisms and processes using conventional inference methods and simulation. Tapir was used in DARPA's Rapid Knowledge Formation (RKF) project to construct models of military tactics from the Army Field Manual FM3-90. These were then used to build Courses of Actions (COAs) which could be critiqued by declarative reasoning or via Monte Carlo simulation. Tapir and Krill can be read and written by non-knowledge engineers making it an excellent vehicle for Subject Matter Experts to build and critique knowledge bases.

  16. The Ontology of Knowledge Based Optimization

    OpenAIRE

    Nasution, Mahyuddin K. M.

    2012-01-01

    Optimization has been becoming a central of studies in mathematic and has many areas with different applications. However, many themes of optimization came from different area have not ties closing to origin concepts. This paper is to address some variants of optimization problems using ontology in order to building basic of knowledge about optimization, and then using it to enhance strategy to achieve knowledge based optimization.

  17. Knowledge base verification based on enhanced colored petri net

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Hyun; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    1997-12-31

    Verification is a process aimed at demonstrating whether a system meets it`s specified requirements. As expert systems are used in various applications, the knowledge base verification of systems takes an important position. The conventional Petri net approach that has been studied recently in order to verify the knowledge base is found that it is inadequate to verify the knowledge base of large and complex system, such as alarm processing system of nuclear power plant. Thus, we propose an improved method that models the knowledge base as enhanced colored Petri net. In this study, we analyze the reachability and the error characteristics of the knowledge base and apply the method to verification of simple knowledge base. 8 refs., 4 figs. (Author)

  18. Knowledge base verification based on enhanced colored petri net

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Hyun; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    1998-12-31

    Verification is a process aimed at demonstrating whether a system meets it`s specified requirements. As expert systems are used in various applications, the knowledge base verification of systems takes an important position. The conventional Petri net approach that has been studied recently in order to verify the knowledge base is found that it is inadequate to verify the knowledge base of large and complex system, such as alarm processing system of nuclear power plant. Thus, we propose an improved method that models the knowledge base as enhanced colored Petri net. In this study, we analyze the reachability and the error characteristics of the knowledge base and apply the method to verification of simple knowledge base. 8 refs., 4 figs. (Author)

  19. Knowledge Expansion in Engineering Education: Engineering Technology as an Alternative

    Directory of Open Access Journals (Sweden)

    Kamsiah Mohd Ismail

    2015-07-01

    Full Text Available Abstract. The current and rising challenges in engineering education demand graduate engineers who are well-prepared to provide innovative solutions as technical specialists, system integrators and change agents. Realizing the importance of producing a highly competent manpower, the Malaysian Government has put considerable pressure to the universities to produce engineers who are competitive in the global market. Hence, this assignment of developing a highly competence engineering technologist workforce in support of the government policy highlights issues pertaining to the development and offering of practical-oriented programs as a knowledge expansion in engineering education at universities as envisioned by the Malaysian Government.  This paper evaluates the current scenario and examines the application-oriented programs of engineering technology education as practice in local institutions in Malaysia in comparisons to some universities abroad. It also investigates the challenges faced by university management in dealing with issues concerning national quality assurance and accreditation pertaining to the engineering technology education programs. Specifically, it analyzes the faculty planning of pedagogies in term of hands-on skills in teaching and learning. A key conclusion of this research is that Malaysian universities need to evaluate its engineering technology education strategies if they aim for quality assurance and accreditation to be established and aspire for successful attempts towards the creation of the requisite knowledge workers that Malaysia needs.Keywords: application-oriented, engineering education, engineering technology, hands-on skills, knowledge expansion 

  20. Customer Oriented Knowledge Management: Experiences from an Internationally Oriented Project Based Organisation

    DEFF Research Database (Denmark)

    Christensen, Karina

    2002-01-01

    Knowledge management should be seen as an on-going process that accentuates the role of knowledge based resources in the management of the finrm. Instead of seeing knowledge management purely as a technological solution this article argues that knowledge management should be regarded as a metapho...

  1. Risk based knowledge assessments: towards a toolbox for managing key knowledge assets

    International Nuclear Information System (INIS)

    Bright, Clive

    2008-01-01

    Full text: It is now well acknowledged that considerable Knowledge Management (KM) issues are faced by national and international nuclear communities. Much of these problems relate to issues of an ageing workforce and the significantly reduced influx of new generation of nuclear engineers and scientists. The management discipline of KM contains a broad spectrum of methods and techniques. However, the effective implementation of a KM strategy requires the selection and deployment of appropriate and targeted approaches that are pertinent to the particular issues of the technical or business area within an organisation. A clear strategy is contingent upon an assessment of what are the knowledge areas and what are the key (knowledge) risk areas. In particular the following issues have to be addressed: 'what knowledge exists?', 'what is the nature and format of that knowledge?' and 'what knowledge is key to our continued, safe, and effective operation?'. Answers to such questions will enable an organisation to prioritise KM effort and employ subsequent KM approaches that are appropriate. Subsequent approaches ranging from the utilisation of information technologies, such as databases; knowledge retention methods; and the setting up of Community of Practices to share knowledge and experience. This paper considers a risk assessment based approach to KM. In so doing the paper extends work previously reported on an approach to conducting knowledge audits by considering the integration of that approach with approaches to (knowledge) risk assessment. The paper also provides a brief review of the various KM approaches that can act to reduce the level of risk faced by an organisation. The paper concludes by reflecting upon the role, value of deploying such a risk based approach. (author)

  2. Knowledge Generation in Technology-Enhanced Health Exhibitions

    DEFF Research Database (Denmark)

    Magnussen, Rikke; Kharlamov, Nikita; Zachariasssen, Maria

    2016-01-01

    This paper presents results from eye-tracking studies of audience interaction and knowledge generation in the technology-enhanced health promotion exhibition PULSE at a science centre in Copenhagen, Denmark. The main purpose of the study was to understand what types of knowledge audiences build...... in health promotion exhibitions designed to include direct physical interaction. The current study is part of the larger PULSE project, which aims to develop innovative health promotion activities that include a science museum exhibition as a key setting. The primary target group is families with children...

  3. A Knowledge Based Approach to VLSI CAD

    Science.gov (United States)

    1983-09-01

    Avail-and/or Dist ISpecial L| OI. SEICURITY CLASIIrCATION OP THIS IPA.lErllm S Daene." A KNOwLEDE BASED APPROACH TO VLSI CAD’ Louis L Steinberg and...major issues lies in building up and managing the knowledge base of oesign expertise. We expect that, as with many recent expert systems, in order to

  4. Model-based explanation of plant knowledge

    Energy Technology Data Exchange (ETDEWEB)

    Huuskonen, P.J. [VTT Electronics, Oulu (Finland). Embedded Software

    1997-12-31

    This thesis deals with computer explanation of knowledge related to design and operation of industrial plants. The needs for explanation are motivated through case studies and literature reviews. A general framework for analysing plant explanations is presented. Prototypes demonstrate key mechanisms for implementing parts of the framework. Power plants, steel mills, paper factories, and high energy physics control systems are studied to set requirements for explanation. The main problems are seen to be either lack or abundance of information. Design knowledge in particular is found missing at plants. Support systems and automation should be enhanced with ways to explain plant knowledge to the plant staff. A framework is formulated for analysing explanations of plant knowledge. It consists of three parts: 1. a typology of explanation, organised by the class of knowledge (factual, functional, or strategic) and by the target of explanation (processes, automation, or support systems), 2. an identification of explanation tasks generic for the plant domain, and 3. an identification of essential model types for explanation (structural, behavioural, functional, and teleological). The tasks use the models to create the explanations of the given classes. Key mechanisms are discussed to implement the generic explanation tasks. Knowledge representations based on objects and their relations form a vocabulary to model and present plant knowledge. A particular class of models, means-end models, are used to explain plant knowledge. Explanations are generated through searches in the models. Hypertext is adopted to communicate explanations over dialogue based on context. The results are demonstrated in prototypes. The VICE prototype explains the reasoning of an expert system for diagnosis of rotating machines at power plants. The Justifier prototype explains design knowledge obtained from an object-oriented plant design tool. Enhanced access mechanisms into on-line documentation are

  5. Model-based explanation of plant knowledge

    Energy Technology Data Exchange (ETDEWEB)

    Huuskonen, P J [VTT Electronics, Oulu (Finland). Embedded Software

    1998-12-31

    This thesis deals with computer explanation of knowledge related to design and operation of industrial plants. The needs for explanation are motivated through case studies and literature reviews. A general framework for analysing plant explanations is presented. Prototypes demonstrate key mechanisms for implementing parts of the framework. Power plants, steel mills, paper factories, and high energy physics control systems are studied to set requirements for explanation. The main problems are seen to be either lack or abundance of information. Design knowledge in particular is found missing at plants. Support systems and automation should be enhanced with ways to explain plant knowledge to the plant staff. A framework is formulated for analysing explanations of plant knowledge. It consists of three parts: 1. a typology of explanation, organised by the class of knowledge (factual, functional, or strategic) and by the target of explanation (processes, automation, or support systems), 2. an identification of explanation tasks generic for the plant domain, and 3. an identification of essential model types for explanation (structural, behavioural, functional, and teleological). The tasks use the models to create the explanations of the given classes. Key mechanisms are discussed to implement the generic explanation tasks. Knowledge representations based on objects and their relations form a vocabulary to model and present plant knowledge. A particular class of models, means-end models, are used to explain plant knowledge. Explanations are generated through searches in the models. Hypertext is adopted to communicate explanations over dialogue based on context. The results are demonstrated in prototypes. The VICE prototype explains the reasoning of an expert system for diagnosis of rotating machines at power plants. The Justifier prototype explains design knowledge obtained from an object-oriented plant design tool. Enhanced access mechanisms into on-line documentation are

  6. The value of health information technology: filling the knowledge gap.

    Science.gov (United States)

    Rudin, Robert S; Jones, Spencer S; Shekelle, Paul; Hillestad, Richard J; Keeler, Emmett B

    2014-11-01

    Despite rapid growth in the rate of adoption of health information technology (HIT), and in the volume of evaluation studies, the existing knowledge base for the value of HIT is not advancing at a similar rate. Most evaluation articles are limited in that they use incomplete measures of value and fail to report the important contextual and implementation characteristics that would allow for an adequate understanding of how the study results were achieved. To address these deficiencies, we present a conceptual framework for measuring HIT value and we propose a checklist of characteristics that should be considered in HIT evaluation studies. The framework consists of 3 key principles: 1) value includes both costs and benefits; 2) value accrues over time; and 3) value depends on which stakeholder's perspective is used. Through examples, we show how these principles can be used to guide and improve HIT evaluation studies. The checklist includes a list of contextual and implementation characteristics that are important for interpretation of results. These improvements will make future studies more useful for policy makers and more relevant to the current needs of the healthcare system.

  7. Construction of knowledge base for geological disposal technologies of high-level radioactive waste Report in 2005. Separate volume 3: Development of safety assessment methods

    International Nuclear Information System (INIS)

    2005-09-01

    The results of development of safety assessment methods by JNC after the second report are reported. JNC-Thermodynamic and JNC-Sorption Database of nuclides was prepared and used. The mass transfer process model in rock, the water quality model of underwater and pore water and approach to modeling radionuclide transport in biosphere were improved. The phenomenological nuclide transport model and the effect assessment model of colloid, natural organic compounds and microorganism were developed. On scenario of safety assessment method, the behaviors in the disposal system were expressed by FEP (Features, Events, and Processes). The effects of data uncertainty and model uncertainty were improved by the assessment technologies and the sensitivity analysis technology. JGIS (JNC Geological Disposal Information Integration System) was developed. The main performance of JGIS was shown. It consists of six chapters; the first chapter is introduction, the second chapter the nuclides transport database, the third the safety assessment model, the forth improvement of safety assessment methods, the fifth application of safety assessment methods and the sixth results and summary. (S.Y.)

  8. International Scientist Mobility and the Locus of Knowledge and Technology Transfer

    DEFF Research Database (Denmark)

    Edler, Jakob; Fier, Hedie; Grimpe, Christoph

    2011-01-01

    Despite the growing interest of scholars and policymakers to better understand the determinants for researchers in public science to transfer knowledge and technology to firms, little is known how temporary international mobility of scientists affects both their propensity to engage in knowledge ...... circulation”. The article contributes to the growing strand of the literature on scientist mobility and on the determinants of industry–science linkages at the individual level.Scientist......Despite the growing interest of scholars and policymakers to better understand the determinants for researchers in public science to transfer knowledge and technology to firms, little is known how temporary international mobility of scientists affects both their propensity to engage in knowledge...... and technology transfer (KTT) as well as the locus of such transfer. Based on a sample of more than 950 German academics from science and engineering faculties, we investigate how the duration and the frequency of scientists’ visits at research institutions outside their home country affect KTT activities. We...

  9. CLARA and ScienTI Networks: Technology and Information for Knowledge Building in the Latin American Scientific Community

    OpenAIRE

    Rejane Sartori; Roberto Carlos Dos Santos Pacheco

    2006-01-01

    Knowledge-based development produces wealth and opens the frontiers of competitiveness, technological innovation and wealth distribution. In developed countries the process is intrinsically bound to the ability of innovative production and the dynamics of network knowledge construction. Within this process the academic and research communities participate effectively in the dynamics of knowledge and innovation, an environment strongly based on information and communication technology. However...

  10. Knowledge-based scheduling of arrival aircraft

    Science.gov (United States)

    Krzeczowski, K.; Davis, T.; Erzberger, H.; Lev-Ram, I.; Bergh, C.

    1995-01-01

    A knowledge-based method for scheduling arrival aircraft in the terminal area has been implemented and tested in real-time simulation. The scheduling system automatically sequences, assigns landing times, and assigns runways to arrival aircraft by utilizing continuous updates of aircraft radar data and controller inputs. The scheduling algorithms is driven by a knowledge base which was obtained in over two thousand hours of controller-in-the-loop real-time simulation. The knowledge base contains a series of hierarchical 'rules' and decision logic that examines both performance criteria, such as delay reduction, as well as workload reduction criteria, such as conflict avoidance. The objective of the algorithms is to devise an efficient plan to land the aircraft in a manner acceptable to the air traffic controllers. This paper will describe the scheduling algorithms, give examples of their use, and present data regarding their potential benefits to the air traffic system.

  11. Knowledge-based diagnosis for aerospace systems

    Science.gov (United States)

    Atkinson, David J.

    1988-01-01

    The need for automated diagnosis in aerospace systems and the approach of using knowledge-based systems are examined. Research issues in knowledge-based diagnosis which are important for aerospace applications are treated along with a review of recent relevant research developments in Artificial Intelligence. The design and operation of some existing knowledge-based diagnosis systems are described. The systems described and compared include the LES expert system for liquid oxygen loading at NASA Kennedy Space Center, the FAITH diagnosis system developed at the Jet Propulsion Laboratory, the PES procedural expert system developed at SRI International, the CSRL approach developed at Ohio State University, the StarPlan system developed by Ford Aerospace, the IDM integrated diagnostic model, and the DRAPhys diagnostic system developed at NASA Langley Research Center.

  12. Knowledge based economy in European Union

    Directory of Open Access Journals (Sweden)

    Ecaterina Stănculescu

    2012-04-01

    Full Text Available Nowadays we assist at a fundamental change from the economy based mainly on resources to the one based mostly on knowledge. The concept has been launched in the last decade of the past century. The knowledge became a production agent and a value creation instrument for whatever country and of course for an entire community like European Union which is constantly concerned by its development and competitiveness. This paper presents the principal characteristics of the present EU preoccupations with the expansion of a knowledge based economy through the 2020 European Development Strategy for smart, sustainable and inclusive economy, and especially for the Framework Programs (Framework Programme 7 and Competitiveness and Innovation Framework Programme.

  13. KNOWLEDGE MANAGEMENT TOOLS FOR THE EUROPEAN KNOWLEDGE BASED SOCIETY

    Directory of Open Access Journals (Sweden)

    Ramona – Diana Leon

    2011-12-01

    Full Text Available Increasingly more literature mention that in the current competitive environment, knowledge have become the main source of the competitive advantages, while recent researches regarding economic growth and development have defined knowledge as being the most critical resource of the emerging countries.Therefore, the organizations interest for knowledge has increased, the latter being defined as knowledge management process in order to meet existing needs, to identify and exploit existing and/or acquired knowledge and developing new opportunities.In other words, knowledge management facilitates productive information usage, intelligence growth, storing intellectual capital, strategic planning, flexible acquisition, collection of best practices, increasing the likelihood of being successful as well as a more productive collaboration within the company.In order to benefit from all these advantages, it is required the usage of specific tools including models and systems to stimulate the creation, dissemination and use of knowledge held by each employee and the organization as a whole.

  14. Doctor-Patient Knowledge Transfer: Innovative Technologies and Policy Implications

    OpenAIRE

    Sára, Zoltán; Csedő, Zoltán; Tóth, Tamás; Fejes, József; Pörzse, Gábor

    2013-01-01

    The aim of this study was to empirically investigate the barriers in doctor-patient communication and knowledge transfer and the role of innovative technologies in overcoming these barriers. We applied qualitative research methods. Our results show that patients extensively use information sources, primarily the Internet before the visits. Patients regularly apply a self-diagnosis regarding their diseases. This implies several risks as many of them are not able to properly inte...

  15. Knowledge bases for modelisation of industrial plants

    International Nuclear Information System (INIS)

    Lorre, J.P.; Evrard, J.M.; Dorlet, E.

    1992-01-01

    Our experience in the development of numerous knowledge based control systems for large industrial applications has led us to the expression of a generic problem and to the implementation of the tools to address it. This paper illustrates, with different practical examples that we have encountered, the principal concepts found in the modelling and management of large industrial knowledge bases. We thus arrive at the definition of the formalism to be used. The principles described are now integrated into the tool SPIRAL and are currently being employed in the development of several applications

  16. Knowledge based management of technical specifications

    International Nuclear Information System (INIS)

    Fiedler, U.; Schalm, S.; Pranckeviciute, K.

    1992-01-01

    TechSPEX is a knowledge based advisory system for checking the status of a nuclear plant on compliance with the safety limits and the limiting conditions of operation. These prescripts for safe reactor operation exist as textual information. For the purpose of its operational use an explicit representation formalism is introduced. On this basis, various approaches of text retrieval are realized, condition based surveillance and control is supported too. Knowledge editing and verification modules ease the adaption to changing requirements. TechSPEX has been implemented in PROLOG. (author). 6 refs, 3 figs

  17. How knowledge and technology are created in a research institute

    Energy Technology Data Exchange (ETDEWEB)

    Monteiro, Carlos Anisio; Barroso, Antonio Carlos de Oliveira, E-mail: monteiro@ipen.b, E-mail: barroso@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2011-07-01

    Collaboration within and across R and D teams is a naturally occurring socio-technical process and it seems to be a very good thrust for technology development and knowledge creation, transfer and preservation in R and D organizations. The study has focused on evidence gathered from: (a) the publication data base of IPEN from 2001 to 2008 was used to generate four time evolving networks of co-authorship, considering time slices of two years; (b) authors 'demographic' data were included as node attributes in the networks; and (c) questionnaire surveys and interviews to understand the reasons which influence a person to search and choose partner to co-work in a research. Social network analysis was used extensively to understand the network configurations, their time evolution, the key actors, groups and their role in this network. A few indexes and algorithms were used to get insight into the networks structures. A variety of centrality indicators were used to better characterize key actors and better understand their position and role in the network. Also many grouping techniques were used to find the most prominent/active groups. For the most central authors or groups, demographic data was cross analyzed with their network indexes to get check for a few hypothesis of preferential attachment. Finally, based on the proper theoretical background and the information gathered with questionnaires and interviews a model was devised to explain the propensity to collaborate. This paper reports the general ideas of the whole research and presents the most important results of the network analysis. (author)

  18. How knowledge and technology are created in a research institute

    International Nuclear Information System (INIS)

    Monteiro, Carlos Anisio; Barroso, Antonio Carlos de Oliveira

    2011-01-01

    Collaboration within and across R and D teams is a naturally occurring socio-technical process and it seems to be a very good thrust for technology development and knowledge creation, transfer and preservation in R and D organizations. The study has focused on evidence gathered from: (a) the publication data base of IPEN from 2001 to 2008 was used to generate four time evolving networks of co-authorship, considering time slices of two years; (b) authors 'demographic' data were included as node attributes in the networks; and (c) questionnaire surveys and interviews to understand the reasons which influence a person to search and choose partner to co-work in a research. Social network analysis was used extensively to understand the network configurations, their time evolution, the key actors, groups and their role in this network. A few indexes and algorithms were used to get insight into the networks structures. A variety of centrality indicators were used to better characterize key actors and better understand their position and role in the network. Also many grouping techniques were used to find the most prominent/active groups. For the most central authors or groups, demographic data was cross analyzed with their network indexes to get check for a few hypothesis of preferential attachment. Finally, based on the proper theoretical background and the information gathered with questionnaires and interviews a model was devised to explain the propensity to collaborate. This paper reports the general ideas of the whole research and presents the most important results of the network analysis. (author)

  19. Associating current knowledge with that of past experience based on knowledge about automata

    Energy Technology Data Exchange (ETDEWEB)

    Koenig, E C

    1982-01-01

    Important to the performance of interactive systems is the ability of its members to associate current knowledge with knowledge of past experience. Knowledge association results in greater detail of a current knowledge and is demonstrated through the use of examples. It is based on knowledge about automata and the knowledge structures are in the form of graphs. 11 references.

  20. Knowledge-based machine indexing from natural language text: Knowledge base design, development, and maintenance

    Science.gov (United States)

    Genuardi, Michael T.

    1993-01-01

    One strategy for machine-aided indexing (MAI) is to provide a concept-level analysis of the textual elements of documents or document abstracts. In such systems, natural-language phrases are analyzed in order to identify and classify concepts related to a particular subject domain. The overall performance of these MAI systems is largely dependent on the quality and comprehensiveness of their knowledge bases. These knowledge bases function to (1) define the relations between a controlled indexing vocabulary and natural language expressions; (2) provide a simple mechanism for disambiguation and the determination of relevancy; and (3) allow the extension of concept-hierarchical structure to all elements of the knowledge file. After a brief description of the NASA Machine-Aided Indexing system, concerns related to the development and maintenance of MAI knowledge bases are discussed. Particular emphasis is given to statistically-based text analysis tools designed to aid the knowledge base developer. One such tool, the Knowledge Base Building (KBB) program, presents the domain expert with a well-filtered list of synonyms and conceptually-related phrases for each thesaurus concept. Another tool, the Knowledge Base Maintenance (KBM) program, functions to identify areas of the knowledge base affected by changes in the conceptual domain (for example, the addition of a new thesaurus term). An alternate use of the KBM as an aid in thesaurus construction is also discussed.

  1. Keynote address : technology management in the knowledge society

    International Nuclear Information System (INIS)

    Chidambaram, R.

    1994-01-01

    In the process of establishing our nuclear power programme, we have helped in establishing many facets of the present industrial infrastructure in the country and in improving the quality of the products of many companies, big and small. Nuclear Power Corporation and the other industrial units of Department of Atomic Energy (DAE) have the powerful R and D backup of Bhabha Atomic Research Centre and the other research centres of DAE. There is extra-ordinary multi-disciplinary research expertise and technological capability in BARC, whose full potential I came to realize for the first time during the development programme and the project execution of the Peaceful Explosion Experiment at Pokhran in 1974. This expertise and capability should enable us to advance rapidly in the nuclear technology field and also help India to rapid progress in tomorrow's knowledge society. But these require careful management of technology development in the coming decades. (author)

  2. Developing Technological Pedagogical Content Knowledge (TPACK) in Animal Physiology

    Science.gov (United States)

    Pusparini, F.; Riandi, R.; Sriyati, S.

    2017-09-01

    The purpose of this study is to describe preservice teacher’s learning during lecturing Animal Physiology and investigate it’s impact on preservice teacher’s technological pedagogical content knowledge (TPACK). How was the lecturing process can improve TPACK of preservice teacher on Biology education espescially in Animal Physiology. There are four experiment classes using Solomon four group design, there are pedagogic treatment, content treatment and technological treatment, the last class without any treatment. Both quantitative and qualitative data were collected. Quantitative data were collected through a questionaire of TPACK. Qualitative data were collected through a lesson plan and teaching simulation. Findings has revealed that participants experienced significant gains in all TPACK constructs. Both of pedagogic and technology treatment is better than others, but pedagogical treatment didn’t also increase PCK most of participants. Findings has implications for teacher education programs to be a professional teachers and for researchers interested.

  3. Knowledge formations in Problem Based Learning

    DEFF Research Database (Denmark)

    Larsen, Verner

    organization are no longer based on relationships between strong independent disciplines, but rather on a number of ‘themes’ or ‘subject areas’ that should be combined and tied together during the students PBL-studies. As such, the curriculum organized knowledge, as well as student’s reflections of various...

  4. VICKEY: Mining Conditional Keys on Knowledge Bases

    DEFF Research Database (Denmark)

    Symeonidou, Danai; Prado, Luis Antonio Galarraga Del; Pernelle, Nathalie

    2017-01-01

    A conditional key is a key constraint that is valid in only a part of the data. In this paper, we show how such keys can be mined automatically on large knowledge bases (KBs). For this, we combine techniques from key mining with techniques from rule mining. We show that our method can scale to KBs...

  5. Improving the Knowledge Base in Teacher Education.

    Science.gov (United States)

    Rockler, Michael J.

    Education in the United States for most of the last 50 years has built its knowledge base on a single dominating foundation--behavioral psychology. This paper analyzes the history of behaviorism. Syntheses are presented of the theories of Ivan P. Pavlov, J. B. Watson, and B. F. Skinner, all of whom contributed to the body of works on behaviorism.…

  6. Tiger: knowledge based gas turbine condition monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Trave-Massuyes, L. [Centre National de la Recherche Scientifique (CNRS), 31 - Toulouse (France); Quevedo, J. [University of Catalonia, (Spain); Milne, R.; Nicol, Ch.

    1995-12-31

    Exxon petrochemical plant in Scotland requires continuous ethylene supply from offshore site in North Sea. The supply is achieved thanks to compressors driven by a 28 MW gas turbine, whose monitoring is of major importance. The TIGER fault diagnostic system is a knowledge base system containing a prediction model. (D.L.) 11 refs.

  7. Tiger: knowledge based gas turbine condition monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Trave-Massuyes, L [Centre National de la Recherche Scientifique (CNRS), 31 - Toulouse (France); Quevedo, J [University of Catalonia, (Spain); Milne, R; Nicol, Ch

    1996-12-31

    Exxon petrochemical plant in Scotland requires continuous ethylene supply from offshore site in North Sea. The supply is achieved thanks to compressors driven by a 28 MW gas turbine, whose monitoring is of major importance. The TIGER fault diagnostic system is a knowledge base system containing a prediction model. (D.L.) 11 refs.

  8. Reflection on the talent structure of knowledge-service oriented nuclear technology library

    International Nuclear Information System (INIS)

    Zhang Xue; Zhang Ruiping

    2010-01-01

    Nuclear technology library is the only authoritative organization in collection of nuclear technology literatures.It has exceptional advantage and a large number of customers with great requirement. With promotion of network and digitization of information resource, new situation is posed before nuclear technology library-transforming from traditional library to knowledge-service oriented library. In order to carry on knowledge service effectively and conveniently, a variety of talents are essential. So establishing a talent team with high quality and complete specialities is the fundamental guarantee. Based on a great deal research and discussion, requirements for establishment of a talent team are put forward in the paper and suggestion are present: 5 basic specialized talents are required in nuclear technology library, including organization and management talent, basic operation talent, search service talent, technology application talent, information development talent. (authors)

  9. Knowledge-based systems programming for knowledge intensive teaching

    NARCIS (Netherlands)

    Achten, H.H.; Dijkstra, J.; Oxman, R.M.; Colajanni, B.; Pellitteri, G.

    1995-01-01

    Typological design implies extensive knowledge of building types in order to design a building belonging to a building type. It facilitates the design process, which can be considered as a sequence of decisions. The paper gives an outline of a new approach in a course teaching typological knowledge

  10. Knowledge-based systems programming for knowledge intensive teaching

    NARCIS (Netherlands)

    Achten, H.H.; Dijkstra, J.; Oxman, R.M.; Bax, M.F.T.

    1994-01-01

    Typological design implies extensive knowledge of building types in order to design a building belonging to a building type. It facilitates the design process, which can be considered as a sequence of decisions. The paper gives an outline of a new approach in a course teaching typological knowledge

  11. Knowledge based diagnostics in nuclear power plants

    International Nuclear Information System (INIS)

    Baldeweg, F.; Fiedler, U.; Weiss, F.P.; Werner, M.

    1987-01-01

    In this paper a special process diagnostic system (PDS) is presented. It must be seen as the result of a long term work on computerized process surveillance and control; it includes a model based system for noise analysis of mechanical vibrations, which has recently been enhanced by using of knowledge based technique (expert systems). The paper discusses the process diagnostic frame concept and emphasize the vibration analysis expert system

  12. Knowledge Based Understanding of Radiology Text

    OpenAIRE

    Ranum, David L.

    1988-01-01

    A data acquisition tool which will extract pertinent diagnostic information from radiology reports has been designed and implemented. Pertinent diagnostic information is defined as that clinical data which is used by the HELP medical expert system. The program uses a memory based semantic parsing technique to “understand” the text. Moreover, the memory structures and lexicon necessary to perform this action are automatically generated from the diagnostic knowledge base by using a special purp...

  13. Manufacturing Technology Information Analysis Center: Knowledge Is Strength

    Science.gov (United States)

    Safar, Michal

    1992-01-01

    The Center's primary function is to facilitate technology transfer within DoD, other government agencies and industry. The DoD has recognized the importance of technology transfer, not only to support specific weapon system manufacture, but to strengthen the industrial base that sustains DoD. MTIAC uses an experienced technical staff of engineers and information specialists to acquire, analyze, and disseminate technical information. Besides ManTech project data, MTIAC collects manufacturing technology from other government agencies, commercial publications, proceedings, and various international sources. MTIAC has various means of disseminating this information. Much of the technical data is on user accessible data bases. The Center researches and writes a number of technical reports each year and publishes a newsletter monthly. Customized research is performed in response to specific inquiries from government and industry. MTIAC serves as a link between Government and Industry to strengthen the manufacturing technology base through the dissemination of advanced manufacturing information.

  14. An Ontology-Based Conceptual Model For Accumulating And Reusing Knowledge In A DMAIC Process

    Science.gov (United States)

    Nguyen, ThanhDat; Kifor, Claudiu Vasile

    2015-09-01

    DMAIC (Define, Measure, Analyze, Improve, and Control) is an important process used to enhance quality of processes basing on knowledge. However, it is difficult to access DMAIC knowledge. Conventional approaches meet a problem arising from structuring and reusing DMAIC knowledge. The main reason is that DMAIC knowledge is not represented and organized systematically. In this article, we overcome the problem basing on a conceptual model that is a combination of DMAIC process, knowledge management, and Ontology engineering. The main idea of our model is to utilizing Ontologies to represent knowledge generated by each of DMAIC phases. We build five different knowledge bases for storing all knowledge of DMAIC phases with the support of necessary tools and appropriate techniques in Information Technology area. Consequently, these knowledge bases provide knowledge available to experts, managers, and web users during or after DMAIC execution in order to share and reuse existing knowledge.

  15. Knowledge-based information systems in practice

    CERN Document Server

    Jain, Lakhmi; Watada, Junzo; Howlett, Robert

    2015-01-01

    This book contains innovative research from leading researchers who presented their work at the 17th International Conference on Knowledge-Based and Intelligent Information and Engineering Systems, KES 2013, held in Kitakyusha, Japan, in September 2013. The conference provided a competitive field of 236 contributors, from which 38 authors expanded their contributions and only 21 published. A plethora of techniques and innovative applications are represented within this volume. The chapters are organized using four themes. These topics include: data mining, knowledge management, advanced information processes and system modelling applications. Each topic contains multiple contributions and many offer case studies or innovative examples. Anyone that wants to work with information repositories or process knowledge should consider reading one or more chapters focused on their technique of choice. They may also benefit from reading other chapters to assess if an alternative technique represents a more suitable app...

  16. Developing technology intelligence strategy to access knowledge of innovation clusters. : The case of KODAK in Cambridge

    OpenAIRE

    Dang , Rani Jeanne; Mortara , Letizia; Thomson , Ruth; Minshall , Tim

    2010-01-01

    International audience; Current times are characterised by a knowledge-based economy and fast technological change. In this difficult environment, companies compete to maintain a relevant position through innovation. In response to these challenges, many companies are currently adopting an open approach to innovation, pursuing innovation by combining internal and external resources. Technology intelligence (TI) activities support the implementation of open innovation with the systematic captu...

  17. Blind Technology Transfer or Technological Knowledge Leakage: a Case Study from the South

    Directory of Open Access Journals (Sweden)

    Dario Codner

    2012-07-01

    Full Text Available Blurring boundaries between science and technology is a new phenomenon especially in fields such as biotechnology. The present work shows the fate of biotech research papers on foreign patents produced during the last decade in Quilmes National University. It aims at recognizing the flow of scientific knowledge developed at a public university towards foreign companies and organizations as well as reflecting on its technological value, the role of technology transfer management, the institutional significance of technology transfer processes and the need to develop innovative public policies for solving structural failures caused by industrial underdevelopment

  18. Austerity and On-The-Job Vocational Learning: Power, Technology and the "Knowledge Economy" Reconsidered

    Science.gov (United States)

    Sawchuk, Peter

    2013-01-01

    This article seeks to contribute to an understanding of questions regarding on-the-job vocational learning, power, and technological change in the context of dynamic notions of knowledge economy and contemporary public sector austerity in the West based on a "mind in political economy" approach inspired by the Cultural Historical…

  19. Knowledge-based network ties in early rapidly internationalising small firms

    DEFF Research Database (Denmark)

    Masango, Shingairai Grace; Marinova, Svetla Trifonova

    2014-01-01

    strong knowledge-based contacts. The ERISF acts as the source that provides the technical information and knowledge, which is then adopted by their network partners. This means that the ERISF’s product and technological capabilities drive the international knowledge creation process. The findings provide...... a holistic characterisation of the concept of knowledge in ERISF internationalisation. Within their interorganisational relationships, ERISFs are involved in knowledge creation, knowledge transfer and knowledge adoption activities. Network ties developed in existing knowledge pools are extended to new...

  20. XML-Based SHINE Knowledge Base Interchange Language

    Science.gov (United States)

    James, Mark; Mackey, Ryan; Tikidjian, Raffi

    2008-01-01

    The SHINE Knowledge Base Interchange Language software has been designed to more efficiently send new knowledge bases to spacecraft that have been embedded with the Spacecraft Health Inference Engine (SHINE) tool. The intention of the behavioral model is to capture most of the information generally associated with a spacecraft functional model, while specifically addressing the needs of execution within SHINE and Livingstone. As such, it has some constructs that are based on one or the other.

  1. The technology vicinity: a location based view on technology

    OpenAIRE

    Steenhuis, H.J.; de Bruijn, E.J.; Kocaoglu, D.F.; Anderson, T.R.

    2001-01-01

    The issue of technology transfer has been viewed from many different perspectives. In this case the focus is on the process of (production) technology transfer. One of the difficulties in studying international technology transfer is the definition of technology. The many technology definitions that exist are either too ‘loosely’ formulated or they require thorough expert knowledge. This results in difficulties with measuring technology and comparing different studies meaningfully. This study...

  2. Authoritative knowledge, the technological imperative and women's responses to prenatal diagnostic technologies.

    Science.gov (United States)

    McCoyd, Judith L M

    2010-12-01

    Theories about authoritative knowledge (AK) and the technological imperative have received varying levels of interest in anthropological, feminist and science and technology studies. Although the anthropological literature abounds with empirical considerations of authoritative knowledge, few have considered both theories through an empirical, inductive lens. Data extracted from an earlier study of 30 women's responses to termination for fetal anomaly are reanalyzed to consider the women's views of, and responses to, prenatal diagnostic technologies (PNDTs). Findings indicate that a small minority embrace the societal portrayal of technology as univalently positive, while the majority have nuanced and ambivalent responses to the use of PNDTs. Further, the interface of authoritative knowledge and the technological imperative suggests that AK derives not only from medical provider status and technology use, but also from the adequacy and trustworthiness of the information. The issue of timing and uncertainty of the information also are interrogated for their impact on women's lives and what that can illuminate about the theories of AK and the technological imperative.

  3. Satellite Contamination and Materials Outgassing Knowledge base

    Science.gov (United States)

    Minor, Jody L.; Kauffman, William J. (Technical Monitor)

    2001-01-01

    Satellite contamination continues to be a design problem that engineers must take into account when developing new satellites. To help with this issue, NASA's Space Environments and Effects (SEE) Program funded the development of the Satellite Contamination and Materials Outgassing Knowledge base. This engineering tool brings together in one location information about the outgassing properties of aerospace materials based upon ground-testing data, the effects of outgassing that has been observed during flight and measurements of the contamination environment by on-orbit instruments. The knowledge base contains information using the ASTM Standard E- 1559 and also consolidates data from missions using quartz-crystal microbalances (QCM's). The data contained in the knowledge base was shared with NASA by government agencies and industry in the US and international space agencies as well. The term 'knowledgebase' was used because so much information and capability was brought together in one comprehensive engineering design tool. It is the SEE Program's intent to continually add additional material contamination data as it becomes available - creating a dynamic tool whose value to the user is ever increasing. The SEE Program firmly believes that NASA, and ultimately the entire contamination user community, will greatly benefit from this new engineering tool and highly encourages the community to not only use the tool but add data to it as well.

  4. Presentation planning using an integrated knowledge base

    Science.gov (United States)

    Arens, Yigal; Miller, Lawrence; Sondheimer, Norman

    1988-01-01

    A description is given of user interface research aimed at bringing together multiple input and output modes in a way that handles mixed mode input (commands, menus, forms, natural language), interacts with a diverse collection of underlying software utilities in a uniform way, and presents the results through a combination of output modes including natural language text, maps, charts and graphs. The system, Integrated Interfaces, derives much of its ability to interact uniformly with the user and the underlying services and to build its presentations, from the information present in a central knowledge base. This knowledge base integrates models of the application domain (Navy ships in the Pacific region, in the current demonstration version); the structure of visual displays and their graphical features; the underlying services (data bases and expert systems); and interface functions. The emphasis is on a presentation planner that uses the knowledge base to produce multi-modal output. There has been a flurry of recent work in user interface management systems. (Several recent examples are listed in the references). Existing work is characterized by an attempt to relieve the software designer of the burden of handcrafting an interface for each application. The work has generally focused on intelligently handling input. This paper deals with the other end of the pipeline - presentations.

  5. Supporting students' knowledge integration with technology-enhanced inquiry curricula

    Science.gov (United States)

    Chiu, Jennifer Lopseen

    Dynamic visualizations of scientific phenomena have the potential to transform how students learn and understand science. Dynamic visualizations enable interaction and experimentation with unobservable atomic-level phenomena. A series of studies clarify the conditions under which embedding dynamic visualizations in technology-enhanced inquiry instruction can help students develop robust and durable chemistry knowledge. Using the knowledge integration perspective, I designed Chemical Reactions, a technology-enhanced curriculum unit, with a partnership of teachers, educational researchers, and chemists. This unit guides students in an exploration of how energy and chemical reactions relate to climate change. It uses powerful dynamic visualizations to connect atomic level interactions to the accumulation of greenhouse gases. The series of studies were conducted in typical classrooms in eleven high schools across the country. This dissertation describes four studies that contribute to understanding of how visualizations can be used to transform chemistry learning. The efficacy study investigated the impact of the Chemical Reactions unit compared to traditional instruction using pre-, post- and delayed posttest assessments. The self-monitoring study used self-ratings in combination with embedded assessments to explore how explanation prompts help students learn from dynamic visualizations. The self-regulation study used log files of students' interactions with the learning environment to investigate how external feedback and explanation prompts influence students' exploration of dynamic visualizations. The explanation study compared specific and general explanation prompts to explore the processes by which explanations benefit learning with dynamic visualizations. These studies delineate the conditions under which dynamic visualizations embedded in inquiry instruction can enhance student outcomes. The studies reveal that visualizations can be deceptively clear

  6. Semantic computing and language knowledge bases

    Science.gov (United States)

    Wang, Lei; Wang, Houfeng; Yu, Shiwen

    2017-09-01

    As the proposition of the next-generation Web - semantic Web, semantic computing has been drawing more and more attention within the circle and the industries. A lot of research has been conducted on the theory and methodology of the subject, and potential applications have also been investigated and proposed in many fields. The progress of semantic computing made so far cannot be detached from its supporting pivot - language resources, for instance, language knowledge bases. This paper proposes three perspectives of semantic computing from a macro view and describes the current status of affairs about the construction of language knowledge bases and the related research and applications that have been carried out on the basis of these resources via a case study in the Institute of Computational Linguistics at Peking University.

  7. Knowledge Governance in Project-Based Organizations

    DEFF Research Database (Denmark)

    Pemsel, Sofia; Wiewiora, Anna; Müller, Ralf

    This paper conceptualizes knowledge governance (KG) in project-based organizations (PBOs) and its methodological approaches for empirical investigation. Three key contributions towards a multi-faceted view of KG and an understanding of KG in PBOs are advanced. These contributions include a defini......This paper conceptualizes knowledge governance (KG) in project-based organizations (PBOs) and its methodological approaches for empirical investigation. Three key contributions towards a multi-faceted view of KG and an understanding of KG in PBOs are advanced. These contributions include...... a definition of KG in PBOs, a conceptual framework to investigate KG and a methodological framework for empirical inquiry into KG in PBO settings. Our definition highlights the contingent nature of KG processes in relation to their organizational context. The conceptual framework addresses macro- and micro...

  8. A STEPPING STONE TOWARDS KNOWLEDGE BASED MAINTENANCE

    OpenAIRE

    G. Waeyenbergh; L. Pintelon; L. Gelders

    2012-01-01

    Maintenance decision making becomes more and more a management concern. Some decades ago, maintenance was still often considered as an unavoidable side effect of production. The perception of maintenance has evolved considerably. One of the current issues is the maintenance concept, being the mix of maintenance interventions and the general framework for determining this mix. In this paper we describe a modular framework, called Knowledge Based Maintenance, for developing a customised mainten...

  9. The HEP Software and Computing Knowledge Base

    Science.gov (United States)

    Wenaus, T.

    2017-10-01

    HEP software today is a rich and diverse domain in itself and exists within the mushrooming world of open source software. As HEP software developers and users we can be more productive and effective if our work and our choices are informed by a good knowledge of what others in our community have created or found useful. The HEP Software and Computing Knowledge Base, hepsoftware.org, was created to facilitate this by serving as a collection point and information exchange on software projects and products, services, training, computing facilities, and relating them to the projects, experiments, organizations and science domains that offer them or use them. It was created as a contribution to the HEP Software Foundation, for which a HEP S&C knowledge base was a much requested early deliverable. This contribution will motivate and describe the system, what it offers, its content and contributions both existing and needed, and its implementation (node.js based web service and javascript client app) which has emphasized ease of use for both users and contributors.

  10. KNOWLEDGE-BASED OBJECT DETECTION IN LASER SCANNING POINT CLOUDS

    Directory of Open Access Journals (Sweden)

    F. Boochs

    2012-07-01

    Full Text Available Object identification and object processing in 3D point clouds have always posed challenges in terms of effectiveness and efficiency. In practice, this process is highly dependent on human interpretation of the scene represented by the point cloud data, as well as the set of modeling tools available for use. Such modeling algorithms are data-driven and concentrate on specific features of the objects, being accessible to numerical models. We present an approach that brings the human expert knowledge about the scene, the objects inside, and their representation by the data and the behavior of algorithms to the machine. This “understanding” enables the machine to assist human interpretation of the scene inside the point cloud. Furthermore, it allows the machine to understand possibilities and limitations of algorithms and to take this into account within the processing chain. This not only assists the researchers in defining optimal processing steps, but also provides suggestions when certain changes or new details emerge from the point cloud. Our approach benefits from the advancement in knowledge technologies within the Semantic Web framework. This advancement has provided a strong base for applications based on knowledge management. In the article we will present and describe the knowledge technologies used for our approach such as Web Ontology Language (OWL, used for formulating the knowledge base and the Semantic Web Rule Language (SWRL with 3D processing and topologic built-ins, aiming to combine geometrical analysis of 3D point clouds, and specialists’ knowledge of the scene and algorithmic processing.

  11. Modeling Guru: Knowledge Base for NASA Modelers

    Science.gov (United States)

    Seablom, M. S.; Wojcik, G. S.; van Aartsen, B. H.

    2009-05-01

    Modeling Guru is an on-line knowledge-sharing resource for anyone involved with or interested in NASA's scientific models or High End Computing (HEC) systems. Developed and maintained by the NASA's Software Integration and Visualization Office (SIVO) and the NASA Center for Computational Sciences (NCCS), Modeling Guru's combined forums and knowledge base for research and collaboration is becoming a repository for the accumulated expertise of NASA's scientific modeling and HEC communities. All NASA modelers and associates are encouraged to participate and provide knowledge about the models and systems so that other users may benefit from their experience. Modeling Guru is divided into a hierarchy of communities, each with its own set forums and knowledge base documents. Current modeling communities include those for space science, land and atmospheric dynamics, atmospheric chemistry, and oceanography. In addition, there are communities focused on NCCS systems, HEC tools and libraries, and programming and scripting languages. Anyone may view most of the content on Modeling Guru (available at http://modelingguru.nasa.gov/), but you must log in to post messages and subscribe to community postings. The site offers a full range of "Web 2.0" features, including discussion forums, "wiki" document generation, document uploading, RSS feeds, search tools, blogs, email notification, and "breadcrumb" links. A discussion (a.k.a. forum "thread") is used to post comments, solicit feedback, or ask questions. If marked as a question, SIVO will monitor the thread, and normally respond within a day. Discussions can include embedded images, tables, and formatting through the use of the Rich Text Editor. Also, the user can add "Tags" to their thread to facilitate later searches. The "knowledge base" is comprised of documents that are used to capture and share expertise with others. The default "wiki" document lets users edit within the browser so others can easily collaborate on the

  12. Knowledge-based geometric modeling in construction

    DEFF Research Database (Denmark)

    Bonev, Martin; Hvam, Lars

    2012-01-01

    a considerably high amount of their recourses is required for designing and specifying the majority of their product assortment. As design decisions are hereby based on knowledge and experience about behaviour and applicability of construction techniques and materials for a predefined design situation, smart......A wider application of IT-based solutions, such as configuration systems and the implementation of modeling standards, has facilitated the trend to produce mass customized products to support inter alia the specification process of the increasing product variety. However, not all industries have...

  13. Factors that Influence the Dissemination of Knowledge in Technology Transfer among Malaysian Manufacturing Employees

    Directory of Open Access Journals (Sweden)

    Mughaneswari ap Sahadevan

    2014-04-01

    Full Text Available The meaning of technology transfer is so wide but mostly involving some form of technology-re- lated exchange. However, in this particular paper, technology transfer is consider as a concept to examine the process of disseminating knowledge and skills that a person owned to another per- son in order to generate higher productivity with new approach of producing a particular prod- uct or service. Although, many researchers have explored the evolution of technology transfer, nonetheless some drivers are yet to be explored in a Malaysian manufacturing industry. This study, therefore attempts to determine the relationship between absorptive capacity, transfer capacity, communication motivation and learning intent and technology transfer performance. A survey methodology was used in a Japanese multinational company based in Klang Valley, Malaysia. A total of 117 questionnaires were received. Results show that absorptive capacity is the most signifi- cant to influence technology transfer performance.

  14. Knowledge-based Fragment Binding Prediction

    Science.gov (United States)

    Tang, Grace W.; Altman, Russ B.

    2014-01-01

    Target-based drug discovery must assess many drug-like compounds for potential activity. Focusing on low-molecular-weight compounds (fragments) can dramatically reduce the chemical search space. However, approaches for determining protein-fragment interactions have limitations. Experimental assays are time-consuming, expensive, and not always applicable. At the same time, computational approaches using physics-based methods have limited accuracy. With increasing high-resolution structural data for protein-ligand complexes, there is now an opportunity for data-driven approaches to fragment binding prediction. We present FragFEATURE, a machine learning approach to predict small molecule fragments preferred by a target protein structure. We first create a knowledge base of protein structural environments annotated with the small molecule substructures they bind. These substructures have low-molecular weight and serve as a proxy for fragments. FragFEATURE then compares the structural environments within a target protein to those in the knowledge base to retrieve statistically preferred fragments. It merges information across diverse ligands with shared substructures to generate predictions. Our results demonstrate FragFEATURE's ability to rediscover fragments corresponding to the ligand bound with 74% precision and 82% recall on average. For many protein targets, it identifies high scoring fragments that are substructures of known inhibitors. FragFEATURE thus predicts fragments that can serve as inputs to fragment-based drug design or serve as refinement criteria for creating target-specific compound libraries for experimental or computational screening. PMID:24762971

  15. Communicating Customer Value Based on Modern Technologies

    Directory of Open Access Journals (Sweden)

    Slawomir Czarniewski

    2014-06-01

    Full Text Available The article presents the idea of gaining a position of competitive advantage by companies operating in the knowledge-based economy and in the age of modern technology. The rate of change in companies’ environments forces organizations to react quickly to clients’ needs. In recent years, there has been an observed systematic increase in the importance of communicating customer value in Poland. This paper shows changes (trends in the system of market communication in the age of modern technology and changes in the economy. The author presents the mechanisms and effects of communication in age new technology in Poland. Modern technologies enable the collection, storage and transmission of information. Reflections contained in the paper do not have definite characteristics and should be treated as an opinion in the discussion.

  16. Probe-based recording technology

    International Nuclear Information System (INIS)

    Naberhuis, Steve

    2002-01-01

    The invention of the scanning tunneling microscope (STM) prompted researchers to contemplate whether such technology could be used as the basis for the storage and retrieval of information. With magnetic data storage technology facing limits in storage density due to the thermal instability of magnetic bits, the super-paramagnetic limit, the heir-apparent for information storage at higher densities appeared to be variants of the STM or similar probe-based storage techniques such as atomic force microscopy (AFM). Among these other techniques that could provide replacement technology for magnetic storage, near-field optical scanning optical microscopy (NSOM or SNOM) has also been investigated. Another alternative probe-based storage technology called atomic resolution storage (ARS) is also currently under development. An overview of these various technologies is herein presented, with an analysis of the advantages and disadvantages inherent in each particularly with respect to reduced device dimensions. The role of micro electro mechanical systems (MEMS) is emphasized

  17. Development of Pre-Service Chemistry Teachers' Technological Pedagogical Content Knowledge

    Science.gov (United States)

    Cetin-Dindar, Ayla; Boz, Yezdan; Sonmez, Demet Yildiran; Celep, Nilgun Demirci

    2018-01-01

    In this study, a mixed-method design was employed to investigate pre-service chemistry teachers' Technological Pedagogical Content Knowledge (TPACK) development. For effective technology integration in instruction, knowledge about technology is not enough; teachers should have different knowledge types which are content, pedagogical, and…

  18. Semantics-based plausible reasoning to extend the knowledge coverage of medical knowledge bases for improved clinical decision support.

    Science.gov (United States)

    Mohammadhassanzadeh, Hossein; Van Woensel, William; Abidi, Samina Raza; Abidi, Syed Sibte Raza

    2017-01-01

    Capturing complete medical knowledge is challenging-often due to incomplete patient Electronic Health Records (EHR), but also because of valuable, tacit medical knowledge hidden away in physicians' experiences. To extend the coverage of incomplete medical knowledge-based systems beyond their deductive closure, and thus enhance their decision-support capabilities, we argue that innovative, multi-strategy reasoning approaches should be applied. In particular, plausible reasoning mechanisms apply patterns from human thought processes, such as generalization, similarity and interpolation, based on attributional, hierarchical, and relational knowledge. Plausible reasoning mechanisms include inductive reasoning , which generalizes the commonalities among the data to induce new rules, and analogical reasoning , which is guided by data similarities to infer new facts. By further leveraging rich, biomedical Semantic Web ontologies to represent medical knowledge, both known and tentative, we increase the accuracy and expressivity of plausible reasoning, and cope with issues such as data heterogeneity, inconsistency and interoperability. In this paper, we present a Semantic Web-based, multi-strategy reasoning approach, which integrates deductive and plausible reasoning and exploits Semantic Web technology to solve complex clinical decision support queries. We evaluated our system using a real-world medical dataset of patients with hepatitis, from which we randomly removed different percentages of data (5%, 10%, 15%, and 20%) to reflect scenarios with increasing amounts of incomplete medical knowledge. To increase the reliability of the results, we generated 5 independent datasets for each percentage of missing values, which resulted in 20 experimental datasets (in addition to the original dataset). The results show that plausibly inferred knowledge extends the coverage of the knowledge base by, on average, 2%, 7%, 12%, and 16% for datasets with, respectively, 5%, 10%, 15

  19. Semantic Technology Application for Collective Knowledge and Information Management: Prospective Consumer Needs Identification

    Directory of Open Access Journals (Sweden)

    Ilma Pranciulytė-Bagdziunienė

    2013-01-01

    Full Text Available Increasing the global flow of information forms qualitatively new complex information processing and filing requirements. The flow of information, data and knowledge manages the various activities of the original search for technological solutions. Very abundant and rapidly growing technology solutions groups are based on semantic technologies. Therefore, this article aims to provide user access needs for producing perspective survey methodology and the empirical study is based on the prospective development of innovative product lines. This article is formed based on the recommendations of the semantics of the applicability of technology development to business end users, public administration, organization of information flows the value of the generation of knowledge—based on environment and development issues. At a practical level, based on empirical evidence substantiates the semantics it is based on technology solutions for organizations in the integration of business processes, which can become the modern aspect of the success factors of the value of domestic and global market and facilitate the diffusion of innovation. The field of qualitative research has revealed the final consumer habits and problems of information search, organization, grouping aspects. Secondly, the study determined the idea of the necessity of technology in business processes, innovation generation and diffusion of knowledge issues aspects. Third, the authors submit proposals based on the semantics of the applicability of technology development opportunities in the business. Finally—users, public administrations and their mutual interaction activities. ST applicability of these segments may occur based on ST integration of IT systems in organizations, the general structure of existing products or used as a service by buying them from outside suppliers. It is important to emphasize that the ST innovative methods to ensure successful use of advanced, modern

  20. An Algebraic Approach to Knowledge Bases Informational Equivalence

    OpenAIRE

    Plotkin, B.; Plotkin, T.

    2003-01-01

    In this paper we study the notion of knowledge from the positions of universal algebra and algebraic logic. We consider first order knowledge which is based on first order logic. We define categories of knowledge and knowledge bases. These notions are defined for the fixed subject of knowledge. The key notion of informational equivalence of two knowledge bases is introduced. We use the idea of equivalence of categories in this definition. We prove that for finite models there is a clear way t...

  1. Development of a measure of knowledge use by stakeholders in rehabilitation technology

    Directory of Open Access Journals (Sweden)

    Vathsala I Stone

    2014-11-01

    Full Text Available Objectives: Uptake of new knowledge by diverse and diffuse stakeholders of health-care technology innovations has been a persistent challenge, as has been measurement of this uptake. This article describes the development of the Level of Knowledge Use Survey instrument, a web-based measure of self-reported knowledge use. Methods: The Level of Knowledge Use Survey instrument was developed in the context of assessing effectiveness of knowledge communication strategies in rehabilitation technology. It was validated on samples representing five stakeholder types: researchers, manufacturers, clinician–practitioners, knowledge brokers, and consumers. Its structure is broadly based on Rogers’ stages of innovation adoption. Its item generation was initially guided by Hall et al’s Levels of Use framework. Item selection was based on content validity indices computed from expert ratings (n1 = 4; n2 = 3. Five representative stakeholders established usability of the web version. The version included 47 items (content validity index for individual items >0.78; content validity index for a scale or set of items >0.90 in self-reporting format. Psychometrics were then established for the version. Results: Analyses of data from small (n = 69 and large (n = 215 samples using the Level of Knowledge Use Survey instrument suggested a conceptual model of four levels of knowledge use—Non-awareness, Awareness, Interest, and Use. The levels covered eight dimensions and six user action categories. The sequential nature of levels was inconclusive due to low cell frequencies. The Level of Knowledge Use Survey instrument showed adequate content validity (≈ 0.88; n = 3 and excellent test–retest reliability (1.0; n = 69. It also demonstrated good construct validity (n = 215 for differentiating among new knowledge outputs (p < 0.001 and among stakeholder types (0.001 < p ≤ 0.013. It showed strong responsiveness to change

  2. Building a knowledge based economy in Russia using guided entrepreneurship

    Science.gov (United States)

    Reznik, Boris N.; Daniels, Marc; Ichim, Thomas E.; Reznik, David L.

    2005-06-01

    Despite advanced scientific and technological (S&T) expertise, the Russian economy is presently based upon manufacturing and raw material exports. Currently, governmental incentives are attempting to leverage the existing scientific infrastructure through the concept of building a Knowledge Based Economy. However, socio-economic changes do not occur solely by decree, but by alteration of approach to the market. Here we describe the "Guided Entrepreneurship" plan, a series of steps needed for generation of an army of entrepreneurs, which initiate a chain reaction of S&T-driven growth. The situation in Russia is placed in the framework of other areas where Guided Entrepreneurship has been successful.

  3. Saberes da docência na educação profissional e tecnológica: um estudo sobre o olhar dos professores The teacher knowledge base concerning Technological and Vocational Education (TVE: an exploration into the teacher's viewpoints

    Directory of Open Access Journals (Sweden)

    José Ângelo Gariglio

    2012-03-01

    Full Text Available Tendo como referência a histórica desregulamentação da docência na Educação Profissional e Tecnológica, além de uma restrita produção científica sobre a matéria, fazemos uma discussão inicial sobre os saberes mobilizados pelos docentes da EP, analisando, a partir das representações dos sujeitos docentes de diversas instituições, os saberes acionados e demandados nas suas atividades educativas e as concepções de formação profissional subjacentes a tais saberes. Autores como Gauthier, Tardif, Lessard, Oliveira e Peterossi ancoram nossas análises, que apontam para a necessidade de se avançar o debate tanto sobre o modelo quanto sobre o lócus da formação desses professores, dando atenção às suas especificidades. Aponta-se para a urgência de definição de políticas de Estado na área: regulamentação do exercício da docência na EP, estratégias de profissionalização, definição de carreiras, salários e avaliação.Having as its reference the historical teaching de-regulation in technological and vocational education, along with a restricted (rare or scarce scientific publication on the matter, we carry out an initial discussion concerning the knowledge base mobilized by the TVE teachers. We do this by means of an analysis of: 1 presentations by teachers from several TVE institutions; 2 the knowledge base activated and/or called into demand by these educational activities. Authors like Gauthier, Tardif, Lessard, Oliveira and Peterossi, strengthen (by way of a theoretical base our analysis, while at the same time making it clear that a debate needs to be launched, as much for the sake of defining the model, as for defining the locus (focal point in the training that TVE teachers receive. Attention needs to be given to the specificities encountered in providing training for teachers training in this field. The urgent need for the state to define its policies in this area, is also pointed out. For example, there is

  4. Irrelevance Reasoning in Knowledge Based Systems

    Science.gov (United States)

    Levy, A. Y.

    1993-01-01

    This dissertation considers the problem of reasoning about irrelevance of knowledge in a principled and efficient manner. Specifically, it is concerned with two key problems: (1) developing algorithms for automatically deciding what parts of a knowledge base are irrelevant to a query and (2) the utility of relevance reasoning. The dissertation describes a novel tool, the query-tree, for reasoning about irrelevance. Based on the query-tree, we develop several algorithms for deciding what formulas are irrelevant to a query. Our general framework sheds new light on the problem of detecting independence of queries from updates. We present new results that significantly extend previous work in this area. The framework also provides a setting in which to investigate the connection between the notion of irrelevance and the creation of abstractions. We propose a new approach to research on reasoning with abstractions, in which we investigate the properties of an abstraction by considering the irrelevance claims on which it is based. We demonstrate the potential of the approach for the cases of abstraction of predicates and projection of predicate arguments. Finally, we describe an application of relevance reasoning to the domain of modeling physical devices.

  5. VICKEY: Mining Conditional Keys on Knowledge Bases

    OpenAIRE

    Symeonidou , Danai; Galárraga , Luis; Pernelle , Nathalie; Saïs , Fatiha; Suchanek , Fabian

    2017-01-01

    International audience; A conditional key is a key constraint that is valid in only a part of the data. In this paper, we show how such keys can be mined automatically on large knowledge bases (KBs). For this, we combine techniques from key mining with techniques from rule mining. We show that our method can scale to KBs of millions of facts. We also show that the conditional keys we mine can improve the quality of entity linking by up to 47 percentage points.

  6. A STEPPING STONE TOWARDS KNOWLEDGE BASED MAINTENANCE

    Directory of Open Access Journals (Sweden)

    G. Waeyenbergh

    2012-01-01

    Full Text Available Maintenance decision making becomes more and more a management concern. Some decades ago, maintenance was still often considered as an unavoidable side effect of production. The perception of maintenance has evolved considerably. One of the current issues is the maintenance concept, being the mix of maintenance interventions and the general framework for determining this mix. In this paper we describe a modular framework, called Knowledge Based Maintenance, for developing a customised maintenance concept. After describing the general framework and its decision support use, some case experiences are given. This experience covers some elements of the proposed framework.

  7. Knowledge-based public health situation awareness

    Science.gov (United States)

    Mirhaji, Parsa; Zhang, Jiajie; Srinivasan, Arunkumar; Richesson, Rachel L.; Smith, Jack W.

    2004-09-01

    There have been numerous efforts to create comprehensive databases from multiple sources to monitor the dynamics of public health and most specifically to detect the potential threats of bioterrorism before widespread dissemination. But there are not many evidences for the assertion that these systems are timely and dependable, or can reliably identify man made from natural incident. One must evaluate the value of so called 'syndromic surveillance systems' along with the costs involved in design, development, implementation and maintenance of such systems and the costs involved in investigation of the inevitable false alarms1. In this article we will introduce a new perspective to the problem domain with a shift in paradigm from 'surveillance' toward 'awareness'. As we conceptualize a rather different approach to tackle the problem, we will introduce a different methodology in application of information science, computer science, cognitive science and human-computer interaction concepts in design and development of so called 'public health situation awareness systems'. We will share some of our design and implementation concepts for the prototype system that is under development in the Center for Biosecurity and Public Health Informatics Research, in the University of Texas Health Science Center at Houston. The system is based on a knowledgebase containing ontologies with different layers of abstraction, from multiple domains, that provide the context for information integration, knowledge discovery, interactive data mining, information visualization, information sharing and communications. The modular design of the knowledgebase and its knowledge representation formalism enables incremental evolution of the system from a partial system to a comprehensive knowledgebase of 'public health situation awareness' as it acquires new knowledge through interactions with domain experts or automatic discovery of new knowledge.

  8. Reviewing the relations between teachers' knowledge and pupils' attitude in the field of primary technology education

    NARCIS (Netherlands)

    Ruurd Taconis; dr. Ellen J. J Rohaan; Wim Jochems

    2010-01-01

    This literature review reports on the assumed relations between primary school teachers' knowledge of technology and pupils' attitude towards technology. In order to find relevant aspects of technology-specific teacher knowledge, scientific literature in the field of primary technology education was

  9. ISPE: A knowledge-based system for fluidization studies

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, S.

    1991-01-01

    Chemical engineers use mathematical simulators to design, model, optimize and refine various engineering plants/processes. This procedure requires the following steps: (1) preparation of an input data file according to the format required by the target simulator; (2) excecuting the simulation; and (3) analyzing the results of the simulation to determine if all specified goals'' are satisfied. If the goals are not met, the input data file must be modified and the simulation repeated. This multistep process is continued until satisfactory results are obtained. This research was undertaken to develop a knowledge based system, IPSE (Intelligent Process Simulation Environment), that can enhance the productivity of chemical engineers/modelers by serving as an intelligent assistant to perform a variety tasks related to process simulation. ASPEN, a widely used simulator by the US Department of Energy (DOE) at Morgantown Energy Technology Center (METC) was selected as the target process simulator in the project. IPSE, written in the C language, was developed using a number of knowledge-based programming paradigms: object-oriented knowledge representation that uses inheritance and methods, rulebased inferencing (includes processing and propagation of probabilistic information) and data-driven programming using demons. It was implemented using the knowledge based environment LASER. The relationship of IPSE with the user, ASPEN, LASER and the C language is shown in Figure 1.

  10. The Development of the IMIA Knowledge Base

    Directory of Open Access Journals (Sweden)

    Graham Wright

    2011-03-01

    Full Text Available Background: The discipline of health or medical informatics is relatively new in that the literature has existed for only 40 years. The British Computer Society (BCS health group was of the opinion that work should be undertaken to explore the scope of medical or health informatics. Once the mapping work was completed the International Medical Informatics Association (IMIA expressed the wish to develop it further to define the knowledge base of the discipline and produce a comprehensive internationally applicable framework. This article will also highlight the move from the expert opinion of a small group to the analysis of publications to generalise and refine the initial findings, and illustrate the importance of triangulation.Objectives: The aim of the project was to explore the theoretical constructs underpinning the discipline of health informatics and produce a cognitive map of the existing understanding of the discipline and develop the knowledge base of health informatics for the IMIA and the BCS.Method: The five-phase project, described in this article, undertaken to define the discipline of health informatics used four forms of triangulation.Results: The output from the project is a framework giving the 14 major headings (Subjects and 245 elements, which together describe the current perception of the discipline of health informatics.Conclusion: This article describes how each phase of the project was strengthened, through using triangulation within and between the different phases. This was done to ensure that the investigators could be confident in the confirmation and completeness of data, and assured of the validity and reliability of the final output of the ‘IMIA Knowledge Base’ that was endorsed by the IMIA Board in November 2009.

  11. The Spanish CEIDEN Technology Platform: Activities on Knowledge Management

    International Nuclear Information System (INIS)

    Velasco, R.; Montero, A.; Ruiz, F.; Leon, P.

    2016-01-01

    Full text: CEIDEN is a Spanish organization for the coordination of the needs and efforts on nuclear fission research and development (R&D). It was created in 1999 and since 2007 has the status of technology platform. The main functions of CEIDEN are to define and develop joint R&D projects, and to present a common position for national and international commitments and proposals in the nuclear fission R&D field. With around one hundred of Spanish members and a significant number of foreign collaborative entities, CEIDEN groups all sectors involved in this field. In 2011 the CEIDEN F+ permanent group was created to cope with the E&T issues. The main objectives of F+ are to promote the coordination of E&T programmes in a national level and to support the Spanish participation in international networks, programmes and projects in this field. Knowledge management is more and more a paramount issue that conditions the future of the Spanish nuclear sector, especially all the related to the generational replacement. In response to this challenge, a nuclear knowledge management group has been created recently in CEIDEN with the target of start coordinated initiatives in the Spanish nuclear sector, in this field. (author

  12. INTEGRATION OF FRACTAL AND NEURAL NETWORK TECHNOLOGIES IN PEDAGOGICAL MONITORING AND ASSESSMENT OF KNOWLEDGE OF TRAINEES

    Directory of Open Access Journals (Sweden)

    Svetlana N Dvoryatkina

    2017-12-01

    Full Text Available The possibility of statement and solution of the problem of searching of theoretical justification and development of efficient didactic mechanisms of the organization of process of pedagogical monitoring and assessment of level of knowledge of trainees can be based on convergence of the leading psychological and pedagogical, mathematical, and informational technologies with accounting of the modern achievements in science. In the article, the pedagogical expediency of realization of opportunities of means of informational technologies in monitoring and assessment of the composite mathematical knowledge, in the management of cognitive activity of students is proved. The ability to integrate fractal methods and neural network technologies in perfecting of a system of pedagogical monitoring of mathematical knowledge of trainees as a part of the automated training systems (ATS is investigated and realized in practice. It is proved that fractal methods increase the accuracy and depth of estimation of the level of proficiency of students and also complexes of intellectual operations of the integrative qualities allowing to master and apply cross-disciplinary knowledge and abilities in professional activity. Neural network technologies solve a problem of realization of the personal focused tutoring from positions of optimum individualization of mathematical education and self-realization of the person. The technology of projection of integrative system of pedagogical monitoring of knowledge of students includes the following stages: establishment of the required tutoring parameters; definition and preparation of input data for realization of integration of fractal and neural network technologies; development of the diagnostic module as a part of the block of an artificial intelligence of ATS, filling of the databases structured by system; start of system for obtaining the forecast. In development of the integrative automated system of pedagogical

  13. Leveraging the Affordances of YouTube: The Role of Pedagogical Knowledge and Mental Models of Technology Functions for Lesson Planning with Technology

    Science.gov (United States)

    Krauskopf, Karsten; Zahn, Carmen; Hesse, Friedrich W.

    2012-01-01

    Web-based digital video tools enable learners to access video sources in constructive ways. To leverage these affordances teachers need to integrate their knowledge of a technology with their professional knowledge about teaching. We suggest that this is a cognitive process, which is strongly connected to a teacher's mental model of the tool's…

  14. Adaptive Knowledge Management of Project-Based Learning

    Science.gov (United States)

    Tilchin, Oleg; Kittany, Mohamed

    2016-01-01

    The goal of an approach to Adaptive Knowledge Management (AKM) of project-based learning (PBL) is to intensify subject study through guiding, inducing, and facilitating development knowledge, accountability skills, and collaborative skills of students. Knowledge development is attained by knowledge acquisition, knowledge sharing, and knowledge…

  15. A display to support knowledge based behavior

    International Nuclear Information System (INIS)

    Lindsay, R.W.

    1990-01-01

    A computerized display has been created for the Experimental Breeder Reactor II (EBR-II) that incorporates information from plant sensors in a thermodynamic model display. The display is designed to provide an operator with an overall view of the plant process as a heat engine. The thermodynamics of the plant are depicted through the use of ionic figures, animated by plant signals, that are related to the major plant components and systems such as the reactor, intermediate heat exchanger, secondary system, evaporators, superheaters, steam system, steam drum, and turbine-generator. This display supports knowledge based reasoning for the operator as well as providing the traditional rule and skill based behavior, and includes side benefits such a inherent signal validation

  16. A display to support knowledge based behavior

    International Nuclear Information System (INIS)

    Lindsay, R.W.

    1990-01-01

    This paper reports on a computerized display that has been created for the Experimental Breeder Reactor II that incorporates information from plant sensors in a thermodynamic model display. The display is designed to provide an operator with an overall view of the plant process as a heat engine. The thermodynamics of the plant are depicted through the use of iconic figures, animated by plant signals, that are related to the major plant components and systems such as the reactor, intermediate heat exchanger, secondary system, evaporators, superheaters, steam system, steam drum, and turbine-generator. This display supports knowledge based reasoning for the operator as well as providing data for the traditional rule and skill based behavior, and includes side benefits such as inherent signal validation

  17. Outward knowledge transfer: the impact of project-based organization on performance

    OpenAIRE

    Ulrich Lichtenthaler

    2010-01-01

    Recently, interfirm knowledge transactions have increased although many firms experience major managerial difficulties in outward knowledge transfer, e.g. technology licensing. To reduce the traditional underemphasis on empirical research into corporate outward knowledge transfer, we use data from 152 firms to test four hypotheses relating firms' outward knowledge transfer performance to two types of project-based organization, which complement formal and informal organizational structures: p...

  18. SAFOD Brittle Microstructure and Mechanics Knowledge Base (BM2KB)

    Science.gov (United States)

    Babaie, Hassan A.; Broda Cindi, M.; Hadizadeh, Jafar; Kumar, Anuj

    2013-07-01

    Scientific drilling near Parkfield, California has established the San Andreas Fault Observatory at Depth (SAFOD), which provides the solid earth community with short range geophysical and fault zone material data. The BM2KB ontology was developed in order to formalize the knowledge about brittle microstructures in the fault rocks sampled from the SAFOD cores. A knowledge base, instantiated from this domain ontology, stores and presents the observed microstructural and analytical data with respect to implications for brittle deformation and mechanics of faulting. These data can be searched on the knowledge base‧s Web interface by selecting a set of terms (classes, properties) from different drop-down lists that are dynamically populated from the ontology. In addition to this general search, a query can also be conducted to view data contributed by a specific investigator. A search by sample is done using the EarthScope SAFOD Core Viewer that allows a user to locate samples on high resolution images of core sections belonging to different runs and holes. The class hierarchy of the BM2KB ontology was initially designed using the Unified Modeling Language (UML), which was used as a visual guide to develop the ontology in OWL applying the Protégé ontology editor. Various Semantic Web technologies such as the RDF, RDFS, and OWL ontology languages, SPARQL query language, and Pellet reasoning engine, were used to develop the ontology. An interactive Web application interface was developed through Jena, a java based framework, with AJAX technology, jsp pages, and java servlets, and deployed via an Apache tomcat server. The interface allows the registered user to submit data related to their research on a sample of the SAFOD core. The submitted data, after initial review by the knowledge base administrator, are added to the extensible knowledge base and become available in subsequent queries to all types of users. The interface facilitates inference capabilities in the

  19. The new world of discovery, invention, and innovation: convergence of knowledge, technology, and society

    Science.gov (United States)

    Roco, Mihail C.; Bainbridge, William S.

    2013-09-01

    Convergence of knowledge and technology for the benefit of society (CKTS) is the core opportunity for progress in the twenty-first century. CKTS is defined as the escalating and transformative interactions among seemingly different disciplines, technologies, communities, and domains of human activity to achieve mutual compatibility, synergism, and integration, and through this process to create added value and branch out to meet shared goals. Convergence has been progressing by stages over the past several decades, beginning with nanotechnology for the material world, followed by convergence of nanotechnology, biotechnology, information, and cognitive science (NBIC) for emerging technologies. CKTS is the third level of convergence. It suggests a general process to advance creativity, innovation, and societal progress based on five general purpose principles: (1) the interdependence of all components of nature and society, (2) decision analysis for research, development, and applications based on dynamic system-logic deduction, (3) enhancement of creativity and innovation through evolutionary processes of convergence that combines existing principles and divergence that generates new ones, (4) the utility of higher-level cross-domain languages to generate new solutions and support transfer of new knowledge, and (5) the value of vision-inspired basic research embodied in grand challenges. CKTS is a general purpose approach in knowledge society. It allows society to answer questions and resolve problems that isolated capabilities cannot, as well as to create new competencies, knowledge, and technologies on this basis. Possible solutions are outlined for key societal challenges in the next decade, including support for foundational emerging technologies NBIC to penetrate essential platforms of human activity and create new industries and jobs, improve lifelong wellness and human potential, achieve personalized and integrated healthcare and education, and secure a

  20. The new world of discovery, invention, and innovation: convergence of knowledge, technology, and society

    International Nuclear Information System (INIS)

    Roco, Mihail C.; Bainbridge, William S.

    2013-01-01

    Convergence of knowledge and technology for the benefit of society (CKTS) is the core opportunity for progress in the twenty-first century. CKTS is defined as the escalating and transformative interactions among seemingly different disciplines, technologies, communities, and domains of human activity to achieve mutual compatibility, synergism, and integration, and through this process to create added value and branch out to meet shared goals. Convergence has been progressing by stages over the past several decades, beginning with nanotechnology for the material world, followed by convergence of nanotechnology, biotechnology, information, and cognitive science (NBIC) for emerging technologies. CKTS is the third level of convergence. It suggests a general process to advance creativity, innovation, and societal progress based on five general purpose principles: (1) the interdependence of all components of nature and society, (2) decision analysis for research, development, and applications based on dynamic system-logic deduction, (3) enhancement of creativity and innovation through evolutionary processes of convergence that combines existing principles and divergence that generates new ones, (4) the utility of higher-level cross-domain languages to generate new solutions and support transfer of new knowledge, and (5) the value of vision-inspired basic research embodied in grand challenges. CKTS is a general purpose approach in knowledge society. It allows society to answer questions and resolve problems that isolated capabilities cannot, as well as to create new competencies, knowledge, and technologies on this basis. Possible solutions are outlined for key societal challenges in the next decade, including support for foundational emerging technologies NBIC to penetrate essential platforms of human activity and create new industries and jobs, improve lifelong wellness and human potential, achieve personalized and integrated healthcare and education, and secure a

  1. The new world of discovery, invention, and innovation: convergence of knowledge, technology, and society

    Energy Technology Data Exchange (ETDEWEB)

    Roco, Mihail C., E-mail: mroco@nsf.gov; Bainbridge, William S. [National Science Foundation (United States)

    2013-09-15

    Convergence of knowledge and technology for the benefit of society (CKTS) is the core opportunity for progress in the twenty-first century. CKTS is defined as the escalating and transformative interactions among seemingly different disciplines, technologies, communities, and domains of human activity to achieve mutual compatibility, synergism, and integration, and through this process to create added value and branch out to meet shared goals. Convergence has been progressing by stages over the past several decades, beginning with nanotechnology for the material world, followed by convergence of nanotechnology, biotechnology, information, and cognitive science (NBIC) for emerging technologies. CKTS is the third level of convergence. It suggests a general process to advance creativity, innovation, and societal progress based on five general purpose principles: (1) the interdependence of all components of nature and society, (2) decision analysis for research, development, and applications based on dynamic system-logic deduction, (3) enhancement of creativity and innovation through evolutionary processes of convergence that combines existing principles and divergence that generates new ones, (4) the utility of higher-level cross-domain languages to generate new solutions and support transfer of new knowledge, and (5) the value of vision-inspired basic research embodied in grand challenges. CKTS is a general purpose approach in knowledge society. It allows society to answer questions and resolve problems that isolated capabilities cannot, as well as to create new competencies, knowledge, and technologies on this basis. Possible solutions are outlined for key societal challenges in the next decade, including support for foundational emerging technologies NBIC to penetrate essential platforms of human activity and create new industries and jobs, improve lifelong wellness and human potential, achieve personalized and integrated healthcare and education, and secure a

  2. A Framework for Integrating Knowledge Management with Risk Management for Information Technology Projects (RiskManiT)

    Science.gov (United States)

    Karadsheh, Louay A.

    2010-01-01

    This research focused on the challenges experienced when executing risk management activities for information technology projects. The lack of adequate knowledge management support of risk management activities has caused many project failures in the past. The research objective was to propose a conceptual framework of the Knowledge-Based Risk…

  3. Health Care Leadership: Managing Knowledge Bases as Stakeholders.

    Science.gov (United States)

    Rotarius, Timothy

    Communities are composed of many organizations. These organizations naturally form clusters based on common patterns of knowledge, skills, and abilities of the individual organizations. Each of these spontaneous clusters represents a distinct knowledge base. The health care knowledge base is shown to be the natural leader of any community. Using the Central Florida region's 5 knowledge bases as an example, each knowledge base is categorized as a distinct type of stakeholder, and then a specific stakeholder management strategy is discussed to facilitate managing both the cooperative potential and the threatening potential of each "knowledge base" stakeholder.

  4. Integrated systems, design and technology 2010 knowledge transfer in new technologies

    CERN Document Server

    Fathi, Madjid

    2011-01-01

    Knowledge creation and technological experiences resulting from modern production life cycles are definitely the most Economical and important intellectual capitals in the current manufacturing endeavors. These are also the basis for enabling industrial competition through managing and identifying organizational and product related needs and opportunities; e. g. health care systems society needs clean environment, sustainable production life cycles needs flexible approachable design and engineering of materials whilst valuable materials are needed for renewable energies and the production of

  5. Technology base for microgravity horticulture

    Science.gov (United States)

    Sauer, R. L.; Magnuson, J. W.; Scruby, R. R.; Scheld, H. W.

    1987-01-01

    Advanced microgravity plant biology research and life support system development for the spacecraft environment are critically hampered by the lack of a technology base. This inadequacy stems primarily from the fact that microgravity results in a lack of convective currents and phase separation as compared to the one gravity environment. A program plan is being initiated to develop this technology base. This program will provide an iterative flight development effort that will be closely integrated with both basic science investigations and advanced life support system development efforts incorporating biological processes. The critical considerations include optimum illumination methods, root aeration, root and shoot support, and heat rejection and gas exchange in the plant canopy.

  6. The Development of the IMIA Knowledge Base

    Directory of Open Access Journals (Sweden)

    Graham Wright

    2011-10-01

    Objectives: The aim of the project was to explore the theoretical constructs underpinning the discipline of health informatics and produce a cognitive map of the existing understanding of the discipline and develop the knowledge base of health informatics for the IMIA and the BCS. Method: The five-phase project, described in this article, undertaken to define the discipline of health informatics used four forms of triangulation. Results: The output from the project is a framework giving the 14 major headings (Subjects and 245 elements, which together describe the current perception of the discipline of health informatics. Conclusion: This article describes how each phase of the project was strengthened, through using triangulation within and between the different phases. This was done to ensure that the investigators could be confident in the confirmation and completeness of data, and assured of the validity and reliability of the final output of the ‘IMIA Knowledge Base’ that was endorsed by the IMIA Board in November 2009.

  7. The earth knowledge base and the global information society

    Directory of Open Access Journals (Sweden)

    A Martynenko

    2006-01-01

    Full Text Available Today many countries have applied the strategy of developing an information-oriented society and data infrastructure. Although varying it their details and means of realization, all these policies have the same aim - to build a global information society. Here in Russia this crucial role belongs to the Electronic (Digital Earth initiative, which integrates geoinformation technologies in the Earth Knowledge Base (EKB. It i designed to promote the economic, social and scientific progress. An analysis of the problem has been done in the article.

  8. Evolving Expert Knowledge Bases: Applications of Crowdsourcing and Serious Gaming to Advance Knowledge Development for Intelligent Tutoring Systems

    Science.gov (United States)

    Floryan, Mark

    2013-01-01

    This dissertation presents a novel effort to develop ITS technologies that adapt by observing student behavior. In particular, we define an evolving expert knowledge base (EEKB) that structures a domain's information as a set of nodes and the relationships that exist between those nodes. The structure of this model is not the particularly novel…

  9. DeepDive: Declarative Knowledge Base Construction.

    Science.gov (United States)

    De Sa, Christopher; Ratner, Alex; Ré, Christopher; Shin, Jaeho; Wang, Feiran; Wu, Sen; Zhang, Ce

    2016-03-01

    The dark data extraction or knowledge base construction (KBC) problem is to populate a SQL database with information from unstructured data sources including emails, webpages, and pdf reports. KBC is a long-standing problem in industry and research that encompasses problems of data extraction, cleaning, and integration. We describe DeepDive, a system that combines database and machine learning ideas to help develop KBC systems. The key idea in DeepDive is that statistical inference and machine learning are key tools to attack classical data problems in extraction, cleaning, and integration in a unified and more effective manner. DeepDive programs are declarative in that one cannot write probabilistic inference algorithms; instead, one interacts by defining features or rules about the domain. A key reason for this design choice is to enable domain experts to build their own KBC systems. We present the applications, abstractions, and techniques of DeepDive employed to accelerate construction of KBC systems.

  10. NASDA knowledge-based network planning system

    Science.gov (United States)

    Yamaya, K.; Fujiwara, M.; Kosugi, S.; Yambe, M.; Ohmori, M.

    1993-01-01

    One of the SODS (space operation and data system) sub-systems, NP (network planning) was the first expert system used by NASDA (national space development agency of Japan) for tracking and control of satellite. The major responsibilities of the NP system are: first, the allocation of network and satellite control resources and, second, the generation of the network operation plan data (NOP) used in automated control of the stations and control center facilities. Up to now, the first task of network resource scheduling was done by network operators. NP system automatically generates schedules using its knowledge base, which contains information on satellite orbits, station availability, which computer is dedicated to which satellite, and how many stations must be available for a particular satellite pass or a certain time period. The NP system is introduced.

  11. Knowledge base rule partitioning design for CLIPS

    Science.gov (United States)

    Mainardi, Joseph D.; Szatkowski, G. P.

    1990-01-01

    This describes a knowledge base (KB) partitioning approach to solve the problem of real-time performance using the CLIPS AI shell when containing large numbers of rules and facts. This work is funded under the joint USAF/NASA Advanced Launch System (ALS) Program as applied research in expert systems to perform vehicle checkout for real-time controller and diagnostic monitoring tasks. The Expert System advanced development project (ADP-2302) main objective is to provide robust systems responding to new data frames of 0.1 to 1.0 second intervals. The intelligent system control must be performed within the specified real-time window, in order to meet the demands of the given application. Partitioning the KB reduces the complexity of the inferencing Rete net at any given time. This reduced complexity improves performance but without undo impacts during load and unload cycles. The second objective is to produce highly reliable intelligent systems. This requires simple and automated approaches to the KB verification & validation task. Partitioning the KB reduces rule interaction complexity overall. Reduced interaction simplifies the V&V testing necessary by focusing attention only on individual areas of interest. Many systems require a robustness that involves a large number of rules, most of which are mutually exclusive under different phases or conditions. The ideal solution is to control the knowledge base by loading rules that directly apply for that condition, while stripping out all rules and facts that are not used during that cycle. The practical approach is to cluster rules and facts into associated 'blocks'. A simple approach has been designed to control the addition and deletion of 'blocks' of rules and facts, while allowing real-time operations to run freely. Timing tests for real-time performance for specific machines under R/T operating systems have not been completed but are planned as part of the analysis process to validate the design.

  12. Integrated Knowledge Based Expert System for Disease Diagnosis System

    Science.gov (United States)

    Arbaiy, Nureize; Sulaiman, Shafiza Eliza; Hassan, Norlida; Afizah Afip, Zehan

    2017-08-01

    The role and importance of healthcare systems to improve quality of life and social welfare in a society have been well recognized. Attention should be given to raise awareness and implementing appropriate measures to improve health care. Therefore, a computer based system is developed to serve as an alternative for people to self-diagnose their health status based on given symptoms. This strategy should be emphasized so that people can utilize the information correctly as a reference to enjoy healthier life. Hence, a Web-based Community Center for Healthcare Diagnosis system is developed based on expert system technique. Expert system reasoning technique is employed in the system to enable information about treatment and prevention of the diseases based on given symptoms. At present, three diseases are included which are arthritis, thalassemia and pneumococcal. Sets of rule and fact are managed in the knowledge based system. Web based technology is used as a platform to disseminate the information to users in order for them to optimize the information appropriately. This system will benefit people who wish to increase health awareness and seek expert knowledge on the diseases by performing self-diagnosis for early disease detection.

  13. Knowledge-based system for automatic MBR control.

    Science.gov (United States)

    Comas, J; Meabe, E; Sancho, L; Ferrero, G; Sipma, J; Monclús, H; Rodriguez-Roda, I

    2010-01-01

    MBR technology is currently challenging traditional wastewater treatment systems and is increasingly selected for WWTP upgrading. MBR systems typically are constructed on a smaller footprint, and provide superior treated water quality. However, the main drawback of MBR technology is that the permeability of membranes declines during filtration due to membrane fouling, which for a large part causes the high aeration requirements of an MBR to counteract this fouling phenomenon. Due to the complex and still unknown mechanisms of membrane fouling it is neither possible to describe clearly its development by means of a deterministic model, nor to control it with a purely mathematical law. Consequently the majority of MBR applications are controlled in an "open-loop" way i.e. with predefined and fixed air scour and filtration/relaxation or backwashing cycles, and scheduled inline or offline chemical cleaning as a preventive measure, without taking into account the real needs of membrane cleaning based on its filtration performance. However, existing theoretical and empirical knowledge about potential cause-effect relations between a number of factors (influent characteristics, biomass characteristics and operational conditions) and MBR operation can be used to build a knowledge-based decision support system (KB-DSS) for the automatic control of MBRs. This KB-DSS contains a knowledge-based control module, which, based on real time comparison of the current permeability trend with "reference trends", aims at optimizing the operation and energy costs and decreasing fouling rates. In practice the automatic control system proposed regulates the set points of the key operational variables controlled in MBR systems (permeate flux, relaxation and backwash times, backwash flows and times, aeration flow rates, chemical cleaning frequency, waste sludge flow rate and recycle flow rates) and identifies its optimal value. This paper describes the concepts and the 3-level architecture

  14. Assessment of knowledge and awareness among radiology personnel regarding current computed tomography technology and radiation dose

    Science.gov (United States)

    Karim, M. K. A.; Hashim, S.; Bradley, D. A.; Bahruddin, N. A.; Ang, W. C.; Salehhon, N.

    2016-03-01

    In this paper, we evaluate the level of knowledge and awareness among 120 radiology personnel working in 7 public hospitals in Johor, Malaysia, concerning Computed Tomography (CT) technology and radiation doses based on a set of questionnaires. Subjects were divided into two groups (Medical profession (Med, n=32) and Allied health profession (AH, n=88). The questionnaires are addressed: (1) demographic data (2) relative radiation dose and (3) knowledge of current CT technology. One-third of respondents from both groups were able to estimate relative radiation dose for routine CT examinations. 68% of the allied health profession personnel knew of the Malaysia regulations entitled ‘Basic Safety Standard (BSS) 2010’, although notably 80% of them had previously attended a radiation protection course. No significant difference (p < 0.05) in mean scores of CT technology knowledge detected between the two groups, with the medical professions producing a mean score of (26.7 ± 2.7) and the allied health professions a mean score of (25.2 ± 4.3). This study points to considerable variation among the respondents concerning their understanding of knowledge and awareness of risks of radiation and CT optimization techniques.

  15. Assessment of knowledge and awareness among radiology personnel regarding current computed tomography technology and radiation dose

    International Nuclear Information System (INIS)

    Karim, M K A; Hashim, S; Bahruddin, N A; Ang, W C; Salehhon, N; Bradley, D A

    2016-01-01

    In this paper, we evaluate the level of knowledge and awareness among 120 radiology personnel working in 7 public hospitals in Johor, Malaysia, concerning Computed Tomography (CT) technology and radiation doses based on a set of questionnaires. Subjects were divided into two groups (Medical profession (Med, n=32) and Allied health profession (AH, n=88). The questionnaires are addressed: (1) demographic data (2) relative radiation dose and (3) knowledge of current CT technology. One-third of respondents from both groups were able to estimate relative radiation dose for routine CT examinations. 68% of the allied health profession personnel knew of the Malaysia regulations entitled ‘Basic Safety Standard (BSS) 2010’, although notably 80% of them had previously attended a radiation protection course. No significant difference (p < 0.05) in mean scores of CT technology knowledge detected between the two groups, with the medical professions producing a mean score of (26.7 ± 2.7) and the allied health professions a mean score of (25.2 ± 4.3). This study points to considerable variation among the respondents concerning their understanding of knowledge and awareness of risks of radiation and CT optimization techniques. (paper)

  16. Sociopathic Knowledge Bases: Correct Knowledge Can Be Harmful Even Given Unlimited Computation

    Science.gov (United States)

    1989-08-01

    1757 I Sociopathic Knowledge Bases: Correct Knowledge Can Be Harmful Even Given Unlimited Computation DTIC5 by flELECTE 5David C. Wilkins and Yong...NUMBERSWOKNI PROGRAM RAT TSWOKUI 61153N RR04206 OC 443g-008 11 TITLE (Include Security Classification) Sociopathic Knowledge Bases: Correct Knowledge Can be...probabilistic rules are shown to be sociopathic and so this problem is very widespread. Sociopathicity has important consequences for rule induction

  17. Knowledge-based development in Singapore and Malaysia

    OpenAIRE

    Menkhoff, Thomas; Gerke, Solvay; Evers, Hans-Dieter; Chay, Yue Wah

    2009-01-01

    This paper addresses the question how knowledge is used to benefit the economic development of Singapore and Malaysia. Both countries have followed strict science policies to establish knowledge governance regimes for a knowledge-based economy. On the basis of empirical studies in both countries we show, how ethnic and religious diversity impact on the ability to develop an epistemic culture of knowledge sharing and ultimately an innovative knowledge-based economy.

  18. Technological Funds of Knowledge in Children's Play: Implications for Early Childhood Educators

    Science.gov (United States)

    Mawson, Brent

    2011-01-01

    The technological knowledge the children bring with them into early childhood settings is not well documented or understood. This article discusses the technological knowledge and understanding of the nature of technology present within children's collaborative play in two New Zealand early childhood settings. The children incorporated a wide…

  19. Coping with expanding nursing practice, knowledge, and technology.

    Science.gov (United States)

    Gaudinski, M A

    1979-10-01

    Nurses utilize transcultural, transactional, systems, primary, and interdisciplinary approaches to physiological and psychosocial components of patient care. Expanded roles, as well as advances in knowledge and technology have prepared nurses for critical, specialized, primary, aerospace, and independent nursing practice. Exciting as they are, nursing's expanded roles and practices frequently contribute to the burnout and distress phenomena increasingly observed in practicing health care professionals. Causes and symptoms of the burnout distress phenomena are many and varied. Selye, Shubin, Maslach, and others adeptly identified and wrote on the phenomena as it specifically relates to nurses and the many facets of nursing practice. Rather than utilizing crisis intervention coping techniques, preventive strategies and adaptations are suggested. This paper reviews and discusses: 1. Factors associated with burnout-distress phenomena identified in professional literature; 2. Identification of factors associated with expanded roles and practice which contribute to burnout stress; 3. Identification of factors in military and civilian air ambulance and aeromedical evacuation systems which contribute to burnout stress; 4. Recommendations for strategies to prevent and cope with burnout distress factors.

  20. Scientific Knowledge and Technology, Animal Experimentation, and Pharmaceutical Development.

    Science.gov (United States)

    Kinter, Lewis B; DeGeorge, Joseph J

    2016-12-01

    Human discovery of pharmacologically active substances is arguably the oldest of the biomedical sciences with origins >3500 years ago. Since ancient times, four major transformations have dramatically impacted pharmaceutical development, each driven by advances in scientific knowledge, technology, and/or regulation: (1) anesthesia, analgesia, and antisepsis; (2) medicinal chemistry; (3) regulatory toxicology; and (4) targeted drug discovery. Animal experimentation in pharmaceutical development is a modern phenomenon dating from the 20th century and enabling several of the four transformations. While each transformation resulted in more effective and/or safer pharmaceuticals, overall attrition, cycle time, cost, numbers of animals used, and low probability of success for new products remain concerns, and pharmaceutical development remains a very high risk business proposition. In this manuscript we review pharmaceutical development since ancient times, describe its coevolution with animal experimentation, and attempt to predict the characteristics of future transformations. © The Author 2016. Published by Oxford University Press on behalf of the Institute for Laboratory Animal Research. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  1. Advanced software development workstation. Knowledge base design: Design of knowledge base for flight planning application

    Science.gov (United States)

    Izygon, Michel E.

    1992-01-01

    The development process of the knowledge base for the generation of Test Libraries for Mission Operations Computer (MOC) Command Support focused on a series of information gathering interviews. These knowledge capture sessions are supporting the development of a prototype for evaluating the capabilities of INTUIT on such an application. the prototype includes functions related to POCC (Payload Operation Control Center) processing. It prompts the end-users for input through a series of panels and then generates the Meds associated with the initialization and the update of hazardous command tables for a POCC Processing TLIB.

  2. Automated knowledge base development from CAD/CAE databases

    Science.gov (United States)

    Wright, R. Glenn; Blanchard, Mary

    1988-01-01

    Knowledge base development requires a substantial investment in time, money, and resources in order to capture the knowledge and information necessary for anything other than trivial applications. This paper addresses a means to integrate the design and knowledge base development process through automated knowledge base development from CAD/CAE databases and files. Benefits of this approach include the development of a more efficient means of knowledge engineering, resulting in the timely creation of large knowledge based systems that are inherently free of error.

  3. Developing fossil fuel based technologies

    International Nuclear Information System (INIS)

    Manzoori, A.R.; Lindner, E.R.

    1991-01-01

    Some of the undesirable effects of burning fossil fuels in the conventional power generating systems have resulted in increasing demand for alternative technologies for power generation. This paper describes a number of new technologies and their potential to reduce the level of atmospheric emissions associated with coal based power generation, such as atmospheric and pressurized fluid bed combustion systems and fuel cells. The status of their development is given and their efficiency is compared with that of conventional pc fired power plants. 1 tab., 7 figs

  4. The Impact of Knowledge Management and Technology: An Analysis of Administrative Behaviours

    Science.gov (United States)

    Nurluoz, Ozdem; Birol, Cem

    2011-01-01

    Knowledge management is crucial in higher education practices that refer knowledge sharing, feedback and communication process as part of the quality improvements. In this process, technology has a role to diffuse knowledge and create a link for sharing within the knowledge management process. In this respect, this research study aims to examine…

  5. Knowledge services in science and technology - improving the university/research centre - company relationship

    International Nuclear Information System (INIS)

    Magalhaes, Adriana Braz Vendramini Bicca

    2009-01-01

    This research proposes a conceptual model for Knowledge Services Structure applicable to Science and Technology Parks (STP) and targeted to micro, small and medium enterprises, in order to improve the business - university - research centers relationship. The idea emerged from exploratory studies on STP and the observation of a knowledge gap on this subject: academic studies that have proposed support services structures to link companies - university - research centers in STP were not available. The study methodology is composed by: exploratory studies complemented by action research. Five aspects of analysis (knowledge services, business development, ordinary/ S and T infrastructure services, expansion of area, and image / visibility) were chosen; a questionnaire based on the these aspects were elaborated and applied by e-mail (e-survey), using as data-base the IASP associated members for the selection of potential respondents. The questionnaire was answered by STP managers from different countries (Spain, Italy, Portugal, Germany, United Kingdom, China, Brazil, Turkey and Uruguay) and, for a deeper and better answers understanding, presential interviews were conducted in certain European STP. After presentation, analysis and discussion of the results, a conceptual model of knowledge service structure for STP has been made, using as basis the Technology Park of Sao Paulo structure. During the formulation of the conceptual model stage, a brief discussion on the importance of knowing and meet the customer needs meant on the inclusion of a customer-interface in the final model. (author)

  6. Home-based Healthcare Technology

    DEFF Research Database (Denmark)

    Verdezoto, Nervo

    of these systems target a specific treatment or condition and might not be sufficient to support the care management work at home. Based on a case study approach, my research investigates home-based healthcare practices and how they can inform future design of home-based healthcare technology that better account......Sustaining daily, unsupervised healthcare activities in non-clinical settings such as the private home can challenge, among others, older adults. To support such unsupervised care activities, an increasingly number of reminders and monitoring systems are being designed. However, most...

  7. Information Technology Management Strategies to Implement Knowledge Management Systems

    Science.gov (United States)

    McGee, Mary Jane Christy

    2017-01-01

    More than 38% of the U.S. public workforce will likely retire by 2030, which may result in a labor shortage. Business leaders may adopt strategies to mitigate knowledge loss within their organizations by capturing knowledge in a knowledge management system (KMS). The purpose of this single case study was to explore strategies that information…

  8. Fault detection and reliability, knowledge based and other approaches

    International Nuclear Information System (INIS)

    Singh, M.G.; Hindi, K.S.; Tzafestas, S.G.

    1987-01-01

    These proceedings are split up into four major parts in order to reflect the most significant aspects of reliability and fault detection as viewed at present. The first part deals with knowledge-based systems and comprises eleven contributions from leading experts in the field. The emphasis here is primarily on the use of artificial intelligence, expert systems and other knowledge-based systems for fault detection and reliability. The second part is devoted to fault detection of technological systems and comprises thirteen contributions dealing with applications of fault detection techniques to various technological systems such as gas networks, electric power systems, nuclear reactors and assembly cells. The third part of the proceedings, which consists of seven contributions, treats robust, fault tolerant and intelligent controllers and covers methodological issues as well as several applications ranging from nuclear power plants to industrial robots to steel grinding. The fourth part treats fault tolerant digital techniques and comprises five contributions. Two papers, one on reactor noise analysis, the other on reactor control system design, are indexed separately. (author)

  9. Enhancing SAT Based Planning with Landmark Knowledge

    NARCIS (Netherlands)

    Elffers, J.; Konijnenberg, D.; Walraven, E.M.P.; Spaan, M.T.J.

    2013-01-01

    Several approaches exist to solve Artificial Intelligence planning problems, but little attention has been given to the combination of using landmark knowledge and satisfiability (SAT). Landmark knowledge has been exploited successfully in the heuristics of classical planning. Recently it was also

  10. Information Technology and Knowledge Processes : - an Uneasy Couple?

    DEFF Research Database (Denmark)

    Brøndsted, J.; Christiansen, N.; Nicolajsen, Hanne Westh

    2001-01-01

    , are both very relevant, interrelated and mutually enabling aspects of the organizational knowledge processes. However it seems as it the research on IT in knowledge management has been primarily concerned with knowledge. We argue that there is a need for studying the work practices in a socio......In this paper we apply the framework of Cook and Brown (1999) to gain a broader perspective on the role of IT in organizational knowledge creation and use. The framework of Cook and Brown suggests that knowledge, as something people possess, and knowing, as the epistemic work done in action......-technical perspective taking the interconnected relationship between knowledge and knowing into account. We explore the role of IT in knowledge processes by studying three different practices. These practices are a pre-defense of a Ph.D. dissertation using a video conferencing system in the area of geophysics...

  11. Proposing a Knowledge Base for Teaching Academic Content to English Language Learners: Disciplinary Linguistic Knowledge

    Science.gov (United States)

    Turkan, Sultan; De Oliveira, Luciana C.; Lee, Okhee; Phelps, Geoffrey

    2014-01-01

    Background/Context: The current research on teacher knowledge and teacher accountability falls short on information about what teacher knowledge base could guide preparation and accountability of the mainstream teachers for meeting the academic needs of ELLs. Most recently, research on specialized knowledge for teaching has offered ways to…

  12. The Relationship between Agriculture Knowledge Bases for Teaching and Sources of Knowledge

    Science.gov (United States)

    Rice, Amber H.; Kitchel, Tracy

    2015-01-01

    The purpose of this study was to describe the agriculture knowledge bases for teaching of agriculture teachers and to see if a relationship existed between years of teaching experience, sources of knowledge, and development of pedagogical content knowledge (PCK), using quantitative methods. A model of PCK from mathematics was utilized as a…

  13. Cognitive diagnostic assessment based on knowledge structure

    Directory of Open Access Journals (Sweden)

    Huang Sue-Fen

    2018-01-01

    Full Text Available The purpose of this study is to provide an integrated method of fuzzy theory basis for individualized concept structure analysis. In order to insight the misconception of learning basic mathematics and progress teaching. This method integrates Fuzzy Logic Model of Perception (FLMP and Interpretive Structural Modelling (ISM. The combined algorithm could analyze individualized concepts structure based on the comparisons with concept structure of expert. In this paper, some well-known knowledge structure assessment methods will be discussed. For item connection, Bart et al ordering theory and Takeya’s item relational structure provided ordering coefficient to construct item relationships and hierarchies. For concepts or skills connection, Warfield’s ISM and Lin et al Concept Advanced Interpretive Structural Modelling (CAISM provided to construct graphic relationship among elements and display the individualized concept hierarchy structure by numeric and picture. Samples contain 427 which come from Min-Hwei Junior College. Subjects were analyzed by CAISM. It shows the traditional assessment is not the only criteria; it must be combined with other assessment tools. The result shows that CAISM gives meaningful learning and lacks of learners.

  14. [Precision Nursing: Individual-Based Knowledge Translation].

    Science.gov (United States)

    Chiang, Li-Chi; Yeh, Mei-Ling; Su, Sui-Lung

    2016-12-01

    U.S. President Obama announced a new era of precision medicine in the Precision Medicine Initiative (PMI). This initiative aims to accelerate the progress of personalized medicine in light of individual requirements for prevention and treatment in order to improve the state of individual and public health. The recent and dramatic development of large-scale biologic databases (such as the human genome sequence), powerful methods for characterizing patients (such as genomics, microbiome, diverse biomarkers, and even pharmacogenomics), and computational tools for analyzing big data are maximizing the potential benefits of precision medicine. Nursing science should follow and keep pace with this trend in order to develop empirical knowledge and expertise in the area of personalized nursing care. Nursing scientists must encourage, examine, and put into practice innovative research on precision nursing in order to provide evidence-based guidance to clinical practice. The applications in personalized precision nursing care include: explanations of personalized information such as the results of genetic testing; patient advocacy and support; anticipation of results and treatment; ongoing chronic monitoring; and support for shared decision-making throughout the disease trajectory. Further, attention must focus on the family and the ethical implications of taking a personalized approach to care. Nurses will need to embrace the paradigm shift to precision nursing and work collaboratively across disciplines to provide the optimal personalized care to patients. If realized, the full potential of precision nursing will provide the best chance for good health for all.

  15. IGENPRO knowledge-based operator support system

    International Nuclear Information System (INIS)

    Morman, J. A.

    1998-01-01

    Research and development is being performed on the knowledge-based IGENPRO operator support package for plant transient diagnostics and management to provide operator assistance during off-normal plant transient conditions. A generic thermal-hydraulic (T-H) first-principles approach is being implemented using automated reasoning, artificial neural networks and fuzzy logic to produce a generic T-H system-independent/plant-independent package. The IGENPRO package has a modular structure composed of three modules: the transient trend analysis module PROTREN, the process diagnostics module PRODIAG and the process management module PROMANA. Cooperative research and development work has focused on the PRODIAG diagnostic module of the IGENPRO package and the operator training matrix of transients used at the Braidwood Pressurized Water Reactor station. Promising simulator testing results with PRODIAG have been obtained for the Braidwood Chemical and Volume Control System (CVCS), and the Component Cooling Water System. Initial CVCS test results have also been obtained for the PROTREN module. The PROMANA effort also involves the CVCS. Future work will be focused on the long-term, slow and mild degradation transients where diagnoses of incipient T-H component failure prior to forced outage events is required. This will enhance the capability of the IGENPRO system as a predictive maintenance tool for plant staff and operator support

  16. Detailed clinical models: representing knowledge, data and semantics in healthcare information technology.

    Science.gov (United States)

    Goossen, William T F

    2014-07-01

    This paper will present an overview of the developmental effort in harmonizing clinical knowledge modeling using the Detailed Clinical Models (DCMs), and will explain how it can contribute to the preservation of Electronic Health Records (EHR) data. Clinical knowledge modeling is vital for the management and preservation of EHR and data. Such modeling provides common data elements and terminology binding with the intention of capturing and managing clinical information over time and location independent from technology. Any EHR data exchange without an agreed clinical knowledge modeling will potentially result in loss of information. Many attempts exist from the past to model clinical knowledge for the benefits of semantic interoperability using standardized data representation and common terminologies. The objective of each project is similar with respect to consistent representation of clinical data, using standardized terminologies, and an overall logical approach. However, the conceptual, logical, and the technical expressions are quite different in one clinical knowledge modeling approach versus another. There currently are synergies under the Clinical Information Modeling Initiative (CIMI) in order to create a harmonized reference model for clinical knowledge models. The goal for the CIMI is to create a reference model and formalisms based on for instance the DCM (ISO/TS 13972), among other work. A global repository of DCMs may potentially be established in the future.

  17. Maximizing the knowledge base: Knowledge Base+ and the Global Open Knowledgebase

    Directory of Open Access Journals (Sweden)

    Liam Earney

    2013-11-01

    Full Text Available The motivation for the two projects discussed in this article is the simple premise that the current inaccuracies of data in the library supply chain are detrimental to the user experience, limit the ability of institutions to effectively manage their collections and that resolving them is increasingly unsustainable at the institutional level. Two projects, Knowledge Base+ (KB+ in the UK and Global Open Knowledgebase (GOKb in the USA, are working in cooperation with a range of other partners, and adopting a communitycentric approach to address these issues and broaden the scope and utility of knowledge bases more generally. The belief is that only through collaboration at a wide range of levels and on a number of fronts can these challenges be overcome.

  18. Case-based reasoning: The marriage of knowledge base and data base

    Science.gov (United States)

    Pulaski, Kirt; Casadaban, Cyprian

    1988-01-01

    The coupling of data and knowledge has a synergistic effect when building an intelligent data base. The goal is to integrate the data and knowledge almost to the point of indistinguishability, permitting them to be used interchangeably. Examples given in this paper suggest that Case-Based Reasoning is a more integrated way to link data and knowledge than pure rule-based reasoning.

  19. Knowledge acquisition and complementary specialization in alliances : The impact of technological overlap and alliance experience

    NARCIS (Netherlands)

    Kavusan, Korcan; Noorderhaven, Niels G.; Duysters, Geert M.

    2016-01-01

    While alliances are widely acknowledged to facilitate knowledge transfers across firms, alliances also allow partnering firms to combine technological capabilities toward joint innovation outcomes through complementary specialization. We examine how technological overlap and alliance experience -

  20. Exposure Knowledge and Perception of Wireless Communication Technologies

    Directory of Open Access Journals (Sweden)

    Frederik Freudenstein

    2015-11-01

    Full Text Available The presented survey investigates risk and exposure perceptions of radio frequency electromagnetic fields (RF EMF associated with base stations, mobile phones and other sources, the key issue being the interaction between both sets of perceptions. The study is based on a cross-sectional design, and conducted with an online sample of 838 citizens from Portugal. The results indicate that respondents’ intuitive exposure perception differs from the actual exposure levels. Furthermore, exposure and risk perceptions are found to be highly correlated. Respondents’ beliefs  about exposure factors, which might influence possible health risks, is appropriate. A regression analysis between exposure characteristics, as predictor variables, and RF EMF risk perception, as the response variable, indicates that people seem to use simple heuristics to form their perceptions. What is bigger, more frequent and longer lasting is seen as riskier. Moreover, the quality of exposure knowledge is not an indicator for amplified EMF risk perception. These findings show that exposure perception is key to future risk communication.

  1. Factors that Influence the Dissemination of Knowledge in Technology Transfer among Malaysian Manufacturing Employees

    Directory of Open Access Journals (Sweden)

    Mughaneswari ap Sahadevan

    2014-05-01

    Full Text Available The meaning of technology transfer is so wide but mostly involving some form of technology-related exchange. However, in this particular paper, technology transfer is consider as a concept to examine the process of  disseminating knowledge and skills that a person owned to another person in order to generate higher productivity with new approach of producing a particular product or service. Although, many researchers have explored the evolution of technology transfer, nonetheless some drivers are yet to be explored in a Malaysian manufacturing industry. This study, therefore attempts to determine the relationship between absorptive capacity, transfer capacity, communication motivation and learning intent and technology transfer performance. A survey methodology was used in a Japanese multinational company based in Klang Valley, Malaysia. A total of 117 questionnaires were received. Results show that absorptive capacity is the most significant to influence technology transfer performance. Normal 0 false false false IN X-NONE X-NONE Key words: Technology transfer, absorptive capacity, Malaysia.   Normal 0 false false false IN X-NONE X-NONE Formalization of Technological Knowledge in the Field of Metallurgy using Document Classification Tools Supported with Semantic Techniques

    Directory of Open Access Journals (Sweden)

    Regulski K.

    2017-06-01

    Full Text Available The process of knowledge formalization is an essential part of decision support systems development. Creating a technological knowledge base in the field of metallurgy encountered problems in acquisition and codifying reusable computer artifacts based on text documents. The aim of the work was to adapt the algorithms for classification of documents and to develop a method of semantic integration of a created repository. Author used artificial intelligence tools: latent semantic indexing, rough sets, association rules learning and ontologies as a tool for integration. The developed methodology allowed for the creation of semantic knowledge base on the basis of documents in natural language in the field of metallurgy.

  2. Knowledge machines language and information in a technological society

    CERN Document Server

    Murray, Denise E

    2014-01-01

    Provides a wide-ranging survey of the sociolinguistic issues raised by the impact of information technology. The author demonstrates how and in which ways the new technologies both affect human communication and are in turn affected by the way people communicate using the technologies.

  3. Testing teacher knowledge for technology teaching in primary schools

    NARCIS (Netherlands)

    Rohaan, E.J.

    2009-01-01

    Today's pupils grow up in a world full of technology. Education's duty is to offer them the opportunity to develop the ability to use, manage, assess, and understand technology in order to `survive' in today's technological society, and to provide them with a comprehensive and realistic concept of

  4. Research on the Method of Enterprise Knowledge Management Based on Web 2.0

    Directory of Open Access Journals (Sweden)

    Le Chengyi

    2017-06-01

    Full Text Available [Purpose/significance] It is the key for the research of enterprise knowledge management to improve the efficiency of enterprise knowledge management by using the advantages of Web 2.0, such as its fastness, public participation and strong interaction. [Method/process] Based on the analysis of the characteristics and main technologies of Web 2.0, this paper discussed the role and application of Web 2.0 related technologies in the enterprise knowledge management, and then put forward the enterprise knowledge management methods based on Web 2.0, including knowledge acquisition method, knowledge classification and organization method, knowledge sharing and evaluation method by usingWeb2 .0. [Result/conclusion] Through the introduction of Web 2.0 related technologies into the knowledge management of enterprises, the research provides convenient and low-cost tools and methods for knowledge management related activities, and helps all users to participate in enterprise knowledge management activities quickly and easily.

  5. A Temporal Fuzzy Logic Formalism for Knowledge Based Systems

    Directory of Open Access Journals (Sweden)

    Vasile MAZILESCU

    2012-11-01

    Full Text Available This paper shows that the influence of knowledge on new forms of work organisation can be described as mutual relationships. Different changes in work organisation also have a strong influence on the increasing importance of knowledge of different individual and collective actors in working situations. After that, we characterize a piece of basic formal system, an Extended Fuzzy Logic System (EFLS with temporal attributes, to conceptualize future DKMSs based on human imprecise for distributed just in time decisions. The approximate reasoning is perceived as a derivation of new formulas with the corresponding temporal attributes, within a fuzzy theory defined by the fuzzy set of special axioms. In a management application, the reasoning is evolutionary because of unexpected events which may change the state of the DKMS. In this kind of situations it is necessary to elaborate certain mechanisms in order to maintain the coherence of the obtained conclusions, to figure out their degree of reliability and the time domain for which these are true. These last aspects stand as possible further directions of development at a basic logic level for future technologies that must automate knowledge organizational processes.

  6. Human Performance Technology and Knowledge Management: A Case Study

    Science.gov (United States)

    Massey, Anne P.; Montoya-Weiss, Mitzi M.; O'Driscoll, Tony M.

    2005-01-01

    As organizations respond to competitive environments and strive to enhance performance, knowledge management (KM) has increasingly become a strategic activity. A KM strategy entails consciously helping people share and put knowledge into action. A key challenge is how to develop and implement KM solutions that provide performance support to…

  7. The representation of knowledge within model-based control systems

    International Nuclear Information System (INIS)

    Weygand, D.P.; Koul, R.

    1987-01-01

    Representation of knowledge in artificially intelligent systems is discussed. Types of knowledge that might need to be represented in AI systems are listed, and include knowledge about objects, events, knowledge about how to do things, and knowledge about what human beings know (meta-knowledge). The use of knowledge in AI systems is discussed in terms of acquiring and retrieving knowledge and reasoning about known facts. Different kinds of reasonings or representations are ghen described with some examples given. These include formal reasoning or logical representation, which is related to mathematical logic, production systems, which are based on the idea of condition-action pairs (production), procedural reasoning, which uses pre-formed plans to solve problems, frames, which provide a structure for representing knowledge in an organized manner, direct analogical representations, which represent knowledge in such a manner that permits some observation without deduction

  8. Knowledge network for medical technology management in Mexico.

    Science.gov (United States)

    Licona, Fabiola Martínez; Leehan, Joaquín Azpiroz; Méndez, Miguel Cadena; Yuriar, Salvador Duarte; Salazar, Raúl Molina; Gilmore, Amador Terán

    2009-10-01

    The role of biomedical engineers (BMEs) has changed widely over the years, from managing a group of technicians to the planning of large installations and the management of medical technology countrywide. As the technology has advanced, the competence of BMEs has been challenged because it is no longer possible to be an expert in every component of the technology involved in running a hospital. Our approach has been to form a network of professionals that are experts in different fields related to medical technology, where work is coordinated to provide high quality services at the planning and execution stages of projects related to medical technology. A study of the procedures involved in the procurement of medical technology has been carried out over the years. These experiences have been compared with several case studies where the approach to problem solving in this area has been multidisciplinary. Planning and execution phases of projects involving medical technology management have been identified. After several instances of collaboration among experts from different fields, a network for management of healthcare technology has been formed at our institution that incorporates the experience from different departments that were dealing separately with projects involving medical technology. This network has led us to propose this approach to solve medical technology management projects, where the strengths of each subgroup complement each other. This structure will lead to a more integrated approach to healthcare technology management and will ensure higher quality solutions.

  9. RESEARCH ON KNOWLEDGE-BASED OPTIMIZATION METHOD OF INDOOR LOCATION BASED ON LOW ENERGY BLUETOOTH

    Directory of Open Access Journals (Sweden)

    C. Li

    2017-09-01

    Full Text Available With the rapid development of LBS (Location-based Service, the demand for commercialization of indoor location has been increasing, but its technology is not perfect. Currently, the accuracy of indoor location, the complexity of the algorithm, and the cost of positioning are hard to be simultaneously considered and it is still restricting the determination and application of mainstream positioning technology. Therefore, this paper proposes a method of knowledge-based optimization of indoor location based on low energy Bluetooth. The main steps include: 1 The establishment and application of a priori and posterior knowledge base. 2 Primary selection of signal source. 3 Elimination of positioning gross error. 4 Accumulation of positioning knowledge. The experimental results show that the proposed algorithm can eliminate the signal source of outliers and improve the accuracy of single point positioning in the simulation data. The proposed scheme is a dynamic knowledge accumulation rather than a single positioning process. The scheme adopts cheap equipment and provides a new idea for the theory and method of indoor positioning. Moreover, the performance of the high accuracy positioning results in the simulation data shows that the scheme has a certain application value in the commercial promotion.

  10. Research on Knowledge-Based Optimization Method of Indoor Location Based on Low Energy Bluetooth

    Science.gov (United States)

    Li, C.; Li, G.; Deng, Y.; Wang, T.; Kang, Z.

    2017-09-01

    With the rapid development of LBS (Location-based Service), the demand for commercialization of indoor location has been increasing, but its technology is not perfect. Currently, the accuracy of indoor location, the complexity of the algorithm, and the cost of positioning are hard to be simultaneously considered and it is still restricting the determination and application of mainstream positioning technology. Therefore, this paper proposes a method of knowledge-based optimization of indoor location based on low energy Bluetooth. The main steps include: 1) The establishment and application of a priori and posterior knowledge base. 2) Primary selection of signal source. 3) Elimination of positioning gross error. 4) Accumulation of positioning knowledge. The experimental results show that the proposed algorithm can eliminate the signal source of outliers and improve the accuracy of single point positioning in the simulation data. The proposed scheme is a dynamic knowledge accumulation rather than a single positioning process. The scheme adopts cheap equipment and provides a new idea for the theory and method of indoor positioning. Moreover, the performance of the high accuracy positioning results in the simulation data shows that the scheme has a certain application value in the commercial promotion.

  11. APPROACH ON INTELLIGENT OPTIMIZATION DESIGN BASED ON COMPOUND KNOWLEDGE

    Institute of Scientific and Technical Information of China (English)

    Yao Jianchu; Zhou Ji; Yu Jun

    2003-01-01

    A concept of an intelligent optimal design approach is proposed, which is organized by a kind of compound knowledge model. The compound knowledge consists of modularized quantitative knowledge, inclusive experience knowledge and case-based sample knowledge. By using this compound knowledge model, the abundant quantity information of mathematical programming and the symbolic knowledge of artificial intelligence can be united together in this model. The intelligent optimal design model based on such a compound knowledge and the automatically generated decomposition principles based on it are also presented. Practically, it is applied to the production planning, process schedule and optimization of production process of a refining & chemical work and a great profit is achieved. Specially, the methods and principles are adaptable not only to continuous process industry, but also to discrete manufacturing one.

  12. Knowledge based expert system approach to instrumentation selection (INSEL

    Directory of Open Access Journals (Sweden)

    S. Barai

    2004-08-01

    Full Text Available The selection of appropriate instrumentation for any structural measurement of civil engineering structure is a complex task. Recent developments in Artificial Intelligence (AI can help in an organized use of experiential knowledge available on instrumentation for laboratory and in-situ measurement. Usually, the instrumentation decision is based on the experience and judgment of experimentalists. The heuristic knowledge available for different types of measurement is domain dependent and the information is scattered in varied knowledge sources. The knowledge engineering techniques can help in capturing the experiential knowledge. This paper demonstrates a prototype knowledge based system for INstrument SELection (INSEL assistant where the experiential knowledge for various structural domains can be captured and utilized for making instrumentation decision. In particular, this Knowledge Based Expert System (KBES encodes the heuristics on measurement and demonstrates the instrument selection process with reference to steel bridges. INSEL runs on a microcomputer and uses an INSIGHT 2+ environment.

  13. The Technology and its Incidence in the Society of Knowledge in School Age

    Directory of Open Access Journals (Sweden)

    Tania Margarita Martínez De Padrón

    2018-05-01

    Full Text Available The essay to present bases its content on the impact that is causing the use of information technology and communication in the knowledge society of school age, specifically in the Venezuelan Primary Education. It is emphasized in the development of the same, the participation of the teacher before the utility of these means and the orientation that this one offers to the students. Likewise, the public policies on ICT and education offered by the Venezuelan Government, the possession of ICT in homes and the impact of new technologies on the daily work of children and adolescents in primary education are highlighted. Along the same, the conditions are specified to be able to develop a significant technological learning and its connection with the achievement of a collective intelligence. It is worth noting that the essay sees the situation in relation to the aforementioned technologies and the challenges faced by the teacher to make the most of learning and to make the knowledge society well-known among school children.

  14. The knowledge-based economy modeled, measured, simulated

    CERN Document Server

    Leydesdorff, Loet

    2006-01-01

    "Challenging, theoretically rich yet anchored in detailed empirical analysis, Loet Leydesdorff's exploration of the dynamics of the knowledge-economy is a major contribution to the field. Drawing on his expertise in science and technology studies, systems theory, and his internationally respected work on the 'triple helix', the book provides a radically new modelling and simulation of knowledge systems, capturing the articulation of structure, communication, and agency therein. This work will be of immense interest to both theorists of the knowledge-economy and practitioners in science policy." Andrew Webster Science & Technology Studies, University of York, UK

  15. Reverse knowledge and technology transfer: imbalances caused by cognitive barriers in asymmetric relationships

    NARCIS (Netherlands)

    Millar-Schijf, Carla C.J.M.; Choi, Chong-Ju

    2009-01-01

    An imbalance exists in almost any type of knowledge and technology transfer due to the information asymmetry of the relationship. However, this is especially the case for reverse technology and knowledge transfer which is epitomised for us by "transfers from an MNC's subsidiary to its headquarters".

  16. Collaborative Professional Development in Higher Education: Developing Knowledge of Technology Enhanced Teaching

    Science.gov (United States)

    Jaipal-Jamani, Kamini; Figg, Candace; Gallagher, Tiffany; Scott, Ruth McQuirter; Ciampa, Katia

    2015-01-01

    This paper describes a professional development initiative for teacher educators, called the "Digital Pedagogies Collaboration," in which the goal was to build faculty knowledge about technology enhanced teaching (TPACK knowledge), develop a collaborative learning and research community of faculty members around technology enhanced…

  17. Sources of inter-firm heterogeneity in accessing knowledge-creation benefits within technology clusters

    NARCIS (Netherlands)

    Arikan, A.; Knoben, J.

    2014-01-01

    We build on recent literature to highlight the distinction between knowledge-diffusion and knowledge-creation benefits of technology clustering and argue that firms located in technology clusters will have differential access to the latter. To explain the antecedents of such differential access, we

  18. Analysis of Relationships between Technological Pedagogical Content Knowledge and Educational Internet Use

    Science.gov (United States)

    Sahin, Ismail; Celik, Ismail; Akturk, Ahmet Oguz; Aydin, Mustafa

    2013-01-01

    This study analyzes the relationships between preservice teachers' technological pedagogical content knowledge (TPACK) and their self-efficacy beliefs in educational Internet use. Findings show statistically significant relationships among the knowledge domains in technology, pedagogy, content, and their intersections. Also, results from the…

  19. Knowledge flows, patent citations and the impact of science on technology

    NARCIS (Netherlands)

    Nomaler, Z.O.; Verspagen, B.

    2008-01-01

    Technological innovation depends on knowledge developed by scientific research. The number of citations made in patents to the scientific literature has been suggested as an indicator of this process of transfer of knowledge from science to technology. We provide an intersectoral insight into this

  1. Knowledge flows, patent citations and the impact of science on technology

    NARCIS (Netherlands)

    Nomaler, Z.O.; Verspagen, B.

    2007-01-01

    Technological innovation depends on knowledge developed by scientific research. The num-ber of citations made in patents to the scientific literature has been suggested as an indicator of this process of transfer of knowledge from science to technology. We provide an intersec-toral insight into this

  2. Inquiry-Based Science and Technology Enrichment Program: Green Earth Enhanced with Inquiry and Technology

    Science.gov (United States)

    Kim, Hanna

    2011-12-01

    This study investigated the effectiveness of a guided inquiry integrated with technology, in terms of female middle-school students' attitudes toward science/scientists and content knowledge regarding selective science concepts (e.g., Greenhouse Effect, Air/Water Quality, Alternative Energy, and Human Health). Thirty-five female students who were entering eighth grade attended an intensive, 1-week Inquiry-Based Science and Technology Enrichment Program which used a main theme, "Green Earth Enhanced with Inquiry and Technology." We used pre- and post-attitude surveys, pre- and post-science content knowledge tests, and selective interviews to collect data and measure changes in students' attitudes and content knowledge. The study results indicated that at the post-intervention measures, participants significantly improved their attitudes toward science and science-related careers and increased their content knowledge of selected science concepts ( p < .05).

  3. Weather, knowledge base and life-style

    Science.gov (United States)

    Bohle, Martin

    2015-04-01

    Why to main-stream curiosity for earth-science topics, thus to appraise these topics as of public interest? Namely, to influence practices how humankind's activities intersect the geosphere. How to main-stream that curiosity for earth-science topics? Namely, by weaving diverse concerns into common threads drawing on a wide range of perspectives: be it beauty or particularity of ordinary or special phenomena, evaluating hazards for or from mundane environments, or connecting the scholarly investigation with concerns of citizens at large; applying for threading traditional or modern media, arts or story-telling. Three examples: First "weather"; weather is a topic of primordial interest for most people: weather impacts on humans lives, be it for settlement, for food, for mobility, for hunting, for fishing, or for battle. It is the single earth-science topic that went "prime-time" since in the early 1950-ties the broadcasting of weather forecasts started and meteorologists present their work to the public, daily. Second "knowledge base"; earth-sciences are a relevant for modern societies' economy and value setting: earth-sciences provide insights into the evolution of live-bearing planets, the functioning of Earth's systems and the impact of humankind's activities on biogeochemical systems on Earth. These insights bear on production of goods, living conditions and individual well-being. Third "life-style"; citizen's urban culture prejudice their experiential connections: earth-sciences related phenomena are witnessed rarely, even most weather phenomena. In the past, traditional rural communities mediated their rich experiences through earth-centric story-telling. In course of the global urbanisation process this culture has given place to society-centric story-telling. Only recently anthropogenic global change triggered discussions on geoengineering, hazard mitigation, demographics, which interwoven with arts, linguistics and cultural histories offer a rich narrative

  4. Potential Knowledge Management Contributions to Human Performance Technology Research and Practice.

    Science.gov (United States)

    Schwen, Thomas M.; Kalman, Howard K.; Hara, Noriko; Kisling, Eric L.

    1998-01-01

    Considers aspects of knowledge management that have the potential to enhance human-performance-technology research and practice. Topics include intellectual capital; learning organization versus organizational learning; the importance of epistemology; the relationship of knowledge, learning, and performance; knowledge creation; socio-technical…

  5. Knowledge and Power in the Technology Classroom: A Framework for Studying Teachers and Students in Action

    Science.gov (United States)

    Danielsson, Anna T.; Berge, Maria; Lidar, Malena

    2018-01-01

    The purpose of this paper is to develop and illustrate an analytical framework for exploring how relations between knowledge and power are constituted in science and technology classrooms. In addition, the empirical purpose of this paper is to explore how disciplinary knowledge and knowledge-making are constituted in teacher-student interactions.…

  6. Organizational Approaches to Managing Tacit Knowledge Loss of Legacy System Information Technology Professionals

    Science.gov (United States)

    Bitner, Michael

    2012-01-01

    Information Technology (IT) employment shortages may be related to employee retirement or normal attrition. Within IT job shortages, tacit knowledge is lost when employees retire or leave organizations. Tacit knowledge is unwritten or unspoken knowledge that is not easily articulated, and exists only with the individuals who obtain the knowledge…

  7. Constructing a multiple choice test to measure elementary school teachers' Pedagogical Content Knowledge of technology education.

    NARCIS (Netherlands)

    Rohaan, E.J.; Taconis, R.; Jochems, W.M.G.

    2009-01-01

    This paper describes the construction and validation of a multiple choice test to measure elementary school teachers' Pedagogical Content Knowledge of technology education. Pedagogical Content Knowledge is generally accepted to be a crucial domain of teacher knowledge and is, therefore, an important

  8. Knowledge Sharing and Dialogue among Information Technology Workers: A Case Study Using a Public Works Department

    Science.gov (United States)

    Harrison, Priscilla

    2013-01-01

    The problem addressed in this study is the willingness or reluctance of information technology (IT) knowledge workers and managers to share knowledge. The purpose of the study was to examine the willingness or unwillingness of technical personnel in IT to share technical knowledge and the issues surrounding their reluctance, if any. The study…

  9. Local Ecological Knowledge and Community- based Management ...

    African Journals Online (AJOL)

    knowledge has been used in the management of wildlife resources in the two areas. ... Union for Conservation of Nature (IUCN), the United Nations Environment ..... In general, it is believed that cutting down trees will disturb the pattern of rainfall. ... determine and monitor animal distribution in the Luangwa GMA and the ...

  10. Knowledge Based Oil and Gas Industry

    Energy Technology Data Exchange (ETDEWEB)

    Sasson, Amir; Blomgren, Atle

    2011-07-01

    This study presents the Norwegian upstream oil and gas industry (defined as all oil and gas related firms located in Norway, regardless of ownership) and evaluates the industry according to the underlying dimensions of a global knowledge hub - cluster attractiveness, education attractiveness, talent attractiveness, RandD and innovation attractiveness, ownership attractiveness, environmental attractiveness and cluster dynamics.(au)

  11. Knowledge Based Oil and Gas Industry

    OpenAIRE

    Sasson, Amir; Blomgren, Atle

    2011-01-01

    This study presents the Norwegian upstream oil and gas industry (defined as all oil and gasrelated firms located in Norway, regardless of ownership) and evaluates the industry according to the underlying dimensions of a global knowledge hub - cluster attractiveness, education attractiveness, talent attractiveness, R&D and innovation attractiveness, ownership attractiveness, environmental attractiveness and cluster dynamics.

  12. Towards Knowledge-Based Digital Libraries

    NARCIS (Netherlands)

    Feng, L.; Jeusfeld, M.A.; Hoppenbrouwers, J.

    From the standpoint of satisfying human's information needs, the current digital library (DL) systems suffer from the following two shortcomings: (i) inadequate high-level cognition support; (ii) inadequate knowledge sharing facilities. In this article, we introduce a two-layered digital library

  13. Energy prices, technological knowledge and green energy innovation. A dynamic panel analysis of patent counts

    International Nuclear Information System (INIS)

    Kruse, Juergen; Wetzel, Heike; Koeln Univ.

    2014-01-01

    We examine the effect of energy prices and technological knowledge on innovation in green energy technologies. In doing so, we consider both demand-pull effects, which induce innovative activity by increasing the expected value of innovations, and technology-push effects, which drive innovative activity by extending the technological capability of an economy. Our analysis is conducted using patent data from the European Patent Office on a panel of 26 OECD countries over the period 1978-2009. Utilizing a dynamic count data model for panel data, we analyze 11 distinct green energy technologies. Our results indicate that the existing knowledge stock is a significant driver of green energy innovation for all technologies. Furthermore, the results suggest that energy prices have a positive impact on innovation for some but not all technologies and that the e.ect of energy prices and technological knowledge on green energy innovation becomes more pronounced after the Kyoto protocol agreement in 1997.

  14. Knowledge Governance Strategies in Project-based Organizations

    DEFF Research Database (Denmark)

    Pemsel, Sofia; Müller, Ralf; Söderlund, Jonas

    2016-01-01

    Knowledge governance (KG) aims at strategically influencing knowledge processes by implementing governance mechanisms. Little is known about whether, how, or why such strategies differ among firms. We utilize a large-scale empirical study of 20 organizations to develop a typology of KG strategies...... in project-based organizations; we then explore how these strategies emerge and affect organizational knowledge processes. Six strategies are identified: Protector, Deliverer, Polisher, Explorer, Supporter, and Analyzer. This paper posits a multi-level categorization model to facilitate comparisons among KG...... strategies. We uncover three main drivers of organizations' chosen knowledge governance strategies-namely, attitudes about humans, knowledge, and knowledge control....

  15. Representability in DL-Lite_R knowledge base exchange

    NARCIS (Netherlands)

    Arenas, M.; Botoeva, E.; Calvanese, D.; Ryzhikov, V.; Sherkhonov, E.

    2012-01-01

    Knowledge base exchange can be considered as a generalization of data exchange in which the aim is to exchange between a source and a target connected through mappings, not only explicit knowledge, i.e., data, but also implicit knowledge in the form of axioms. Such problem has been investigated

  16. Knowledge and Cognitive Process Dimensions of Technology Teachers' Lesson Objectives

    Science.gov (United States)

    Mathumbu, David; Rauscher, Willem; Braun, Max

    2014-01-01

    A clearly stated lesson objective is considered an essential component of a well-planned lesson. Many teachers of Technology, a relatively new subject in South African schools, teach Technology with rather limited training both in content and methodological approaches. This study sought to investigate and classify lesson objectives framed or…

  17. In defense of types in knowledge-based CAAD

    DEFF Research Database (Denmark)

    Galle, Per

    1997-01-01

    There are two basic approaches to representation of design knowledge in knowledge-based CAAD systems, the type-based approach which has a long tradition, and the more recent typeless approach. Proponents of the latter have offered a number of arguments against the type-based approach which...

  18. Transforming Dental Technology Education: Skills, Knowledge, and Curricular Reform.

    Science.gov (United States)

    Bobich, Anita M; Mitchell, Betty L

    2017-09-01

    Dental technology is one of the core allied dental health professions supporting the practice of dentistry. By definition, it is the art, science, and technologies that enable the design and fabrication of dental prostheses and/or corrective devices to restore natural teeth and supporting structures to fulfill a patient's physiological and esthetic needs. Dental technology educational programs are faced with serious challenges, including rapid changes in technology, inadequate funding for educational programs, and the need to develop curricula that reflect current industry needs. Better communications between dental technologists and practitioners are needed to gain greater recognition of the contribution that technologists make to patient health. Amid these challenges, the technology workforce is dedicated to providing patients with the best possible restorative dental prostheses. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

  19. Building and Using Large Common Sense Knowledge Bases

    National Research Council Canada - National Science Library

    Forbus, Kenneth D

    2001-01-01

    .... We developed techniques that enabled realistic-sized situations to be compared, for automatically extracting and extending cases dynamically based on task constraints from a general purpose knowledge...

  20. An Evaluation of Applying Knowledge Base to Academic Information Service

    OpenAIRE

    Seok-Hyoung Lee; Hwan-Min Kim; Ho-Seop Choe

    2013-01-01

    Through a series of precise text handling processes, including automatic extraction of information from documents with knowledge from various fields, recognition of entity names, detection of core topics, analysis of the relations between the extracted information and topics, and automatic inference of new knowledge, the most efficient knowledge base of the relevant field is created, and plans to apply these to the information knowledge management and service are the core requirements necessa...

  1. Tourism informatics towards novel knowledge based approaches

    CERN Document Server

    Hashimoto, Kiyota; Iwamoto, Hidekazu

    2015-01-01

    This book introduces new trends of theory and practice of information technologies in tourism. The book does not handle only the fundamental contribution, but also discusses innovative and emerging technologies to promote and develop new generation tourism informatics theory and their applications. Some chapters are concerned with data analysis, web technologies, social media, and their case studies. Travel information on the web provided by travelers is very useful for other travelers make their travel plan. A chapter in this book proposes a method for interactive retrieval of information on accommodation facilities to support travelling customers in their travel preparations. Also an adaptive user interface for personalized transportation guidance system is proposed. Another chapter in this book shows a novel support system for the collaborative tourism planning by using the case reports that are collected via Internet. Also, a system for recommending hotels for the users is proposed and evaluated. Other ch...

  2. An approach to enrich online medical Problem-Based Learning with tacit healthcare knowledge.

    Science.gov (United States)

    Cheah, Yu-N; Rashid, Faridah Abdul; Abidi, Syed Sibte Raza

    2003-01-01

    Existing Problem-Based Learning (PBL) problems, though suitable in their own right for teaching purposes, are limited in their potential to evolve by themselves and to create new knowledge. Presently, they are based on textbook examples of past cases and/or cases that have been transcribed by a clinician. In this paper, we present (a) a tacit healthcare knowledge representation formalism called Healthcare Scenarios, (b) the relevance of healthcare scenarios in PBL in healthcare and medicine, (c) a novel PBL-Scenario-based tacit knowledge explication strategy and (d) an online PBL Problem Composer and Presenter (PBL-Online) to facilitate the acquisition and utilisation of expert-quality tacit healthcare knowledge to enrich online PBL. We employ a confluence of healthcare knowledge management tools and Internet technologies to bring tacit healthcare knowledge-enriched PBL to a global and yet more accessible level.

  3. Modeling and knowledge acquisition processes using case-based inference

    Directory of Open Access Journals (Sweden)

    Ameneh Khadivar

    2017-03-01

    Full Text Available The method of acquisition and presentation of the organizational Process Knowledge has considered by many KM researches. In this research a model for process knowledge acquisition and presentation has been presented by using the approach of Case Base Reasoning. The validation of the presented model was evaluated by conducting an expert panel. Then a software has been developed based on the presented model and implemented in Eghtesad Novin Bank of Iran. In this company, based on the stages of the presented model, first the knowledge intensive processes has been identified, then the Process Knowledge was stored in a knowledge base in the format of problem/solution/consequent .The retrieval of the knowledge was done based on the similarity of the nearest neighbor algorithm. For validating of the implemented system, results of the system has compared by the results of the decision making of the expert of the process.

  4. The many secure knowledge bases of psychotherapy.

    Science.gov (United States)

    Bergner, Raymond M

    2006-01-01

    Psychotherapeutic practice, while it has benefited greatly from scientific research, rests on many further secure epistemic foundations. In the present article, this thesis is argued in two stages. First, a brief review of some elementary epistemological findings is presented. In this review, the generally acknowledged degree of certainty attributed to different knowledge sources, and thus the confidence with which we may believe and act upon them, are recounted. Second, an extended analysis of the ways in which each of these knowledge sources enter into the practice of psychotherapy is developed. In the end, what is proffered here is a demonstration that well conducted psychotherapy is an activity whose judgments and decisions rest on many secure foundations.

  5. Knowledge-based methods for control systems

    International Nuclear Information System (INIS)

    Larsson, J.E.

    1992-01-01

    This thesis consists of three projects which combine artificial intelligence and control. The first part describes an expert system interface for system identification, using the interactive identification program Idpac. The interface works as an intelligent help system, using the command spy strategy. It contains a multitude of help system ideas. The concept of scripts is introduced as a data structure used to describe the procedural part of the knowledge in the interface. Production rules are used to represent diagnostic knowledge. A small knowledge database of scripts and rules has been developed and an example run is shown. The second part describes an expert system for frequency response analysis. This is one of the oldest and most widely used methods to determine the dynamics of a stable linear system. Though quite simple, it requires knowledge and experience of the user, in order to produce reliable results. The expert system is designed to help the user in performing the analysis. It checks whether the system is linear, finds the frequency and amplitude ranges, verifies the results, and, if errors should occur, tries to give explanation and remedies for them. The third part describes three diagnostic methods for use with industrial processes. They are measurement validation, i.e., consistency checking of sensor and measurement values using any redundancy of instrumentation; alarm analysis, i.e. analysis of multiple alarm situations to find which alarms are directly connected to primary faults and which alarms are consequential effects of the primary ones; and fault diagnosis, i.e., a search for the causes of and remedies for faults. The three methods use multilevel flow models, (MFM), to describe the target process. They have been implemented in the programming tool G2, and successfully tested on two small processes. (164 refs.) (au)

  6. Reactors based on CANDU technology

    International Nuclear Information System (INIS)

    Bjegun, S.V.; Shirokov, S.V.

    2012-01-01

    The paper analyzes the use CANDU technology in world nuclear energy. Advantages and disadvantages in implementation of this technology are considered in terms of economic and technical aspects. Technological issues related to the use of CANDU reactors and nuclear safety issues are outlined. Risks from implementation of this reactor technology in nuclear energy of Ukraine are determined

  7. Systems Engineering Knowledge Asset (SEKA) Management for Higher Performing Engineering Teams: People, Process and Technology toward Effective Knowledge-Workers

    Science.gov (United States)

    Shelby, Kenneth R., Jr.

    2013-01-01

    Systems engineering teams' value-creation for enterprises is slower than possible due to inefficiencies in communication, learning, common knowledge collaboration and leadership conduct. This dissertation outlines the surrounding people, process and technology dimensions for higher performing engineering teams. It describes a true experiment…

  8. Formal and Informal Knowledge and Technology Transfer from Academia to Industry

    DEFF Research Database (Denmark)

    Grimpe, Christoph; Hussinger, Katrin

    2013-01-01

    Literature has identified formal and informal channels in university knowledge and technology transfer (KTT). While formal KTT typically involves a legal contract on a patent or on collaborative research activities, informal transfer channels refer to personal contacts and hence to the tacit...... dimension of knowledge transfer. Research is, however, scarce regarding the interaction of formal and informal transfer mechanisms. In this paper, we analyze whether these activities are mutually reinforcing, i.e., complementary. Our analysis is based on a comprehensive data-set of more than 2,000 German...... manufacturing firms and confirms a complementary relationship between formal and informal KTT modes: using both transfer channels contributes to higher innovation performance. The management of the firm should therefore strive to maintain close informal relationships with universities to realize the full...

  9. Knowledge-Based Control Systems via Internet Part I. Applications in Biotechnology

    Directory of Open Access Journals (Sweden)

    Georgi Georgiev

    2005-04-01

    Full Text Available An extensive approach towards the dissemination of expert knowledge and coordination efforts to distributed points and seamless integration of control strategies applied to distributed yet identical systems is crucial to enhance overall efficiency and operational costs. Application of Knowledge-Based Control System via Internet will be very efficient especially in biotechnology, because many industrial bioprocesses, based on the same technological principles, are distributed in the whole world. Brewing industry oriented practical solutions illustrate this approach.

  10. Managing Service Quality within the Knowledge-Based Economy: Opportunities and Challenges

    OpenAIRE

    Ion Plumb; Andreea Zamfir

    2009-01-01

    The knowledge-based economy, along with the impact of information society technologies, presents the service organizations and their customers with many potential opportunities as well as challenges. Therefore, this study explores how the knowledge-based economy could influence the quality management of service organizations. The study reveals that the actors within the service sector have vast new opportunities in terms of communication and value co-creation, but in the same time, the requir...

  11. Using Information Systems to Leverage Knowledge Management Processes: The Role of Work Context, Job Characteristics and Task-Technology Fit

    Directory of Open Access Journals (Sweden)

    Çev.: Nazlı Alkan

    2017-03-01

    Full Text Available This study focus on how an individual's particular work context, job characteristics and knowledge-related job requirements affect the relationship between task-technology fit (TTF and the use of information systems (IS in knowledge management activities. The literature on Knowledge Management (KM and Knowledge Management Systems (KMS is reviewed to identify relevant constructs and their dimensions. Based on this analysis, a model is proposed and tested. Our findings suggest that providing appropriate IT tools that fit tasks alone is no guarantee that they will be employed to leverage the acquisition, transfer and reuse of knowledge. Certain characteristics of jobs, driven by particular work contexts, generate greater need and opportunity for knowledge use. These latter factors moderate the relationship between TTF and actual use of IS for KM purposes: the greater the need and opportunity to conduct knowledgerelated activities, the stronger the relationship between TTF and actual IS use.

  12. Technology transfer at CERN a study on inter-organizational knowledge transfer within multi-national R&D collaborations

    CERN Document Server

    Huuse, H; Streit-Bianchi, M

    2004-01-01

    This study focus on the knowledge aspect of inter-organizational technology transfer projects. We have studied two large R&D collaborations where CERN is involved as one of several participating organizations, in order to reveal the causalities related to the knowledge transfer processes within these projects. The objective of the study is to understand how knowledge transfer happens, identify influencing factors to the process, and finally investigate the outcome of such processes. The study is founded on a thorough literature review where we examine different aspects of inter-organizational knowledge transfer. Based on the theory, we develop an analytic framework and establish different elements in the knowledge transfer process to study in more detail. This framework illustrates the relation between the different elements in a knowledge transfer process and provides the structure for our empirical foundation. We perform an explanatory embedded multiple case study and analyze our findings in terms of th...

  13. Knowledge-based control of an adaptive interface

    Science.gov (United States)

    Lachman, Roy

    1989-01-01

    The analysis, development strategy, and preliminary design for an intelligent, adaptive interface is reported. The design philosophy couples knowledge-based system technology with standard human factors approaches to interface development for computer workstations. An expert system has been designed to drive the interface for application software. The intelligent interface will be linked to application packages, one at a time, that are planned for multiple-application workstations aboard Space Station Freedom. Current requirements call for most Space Station activities to be conducted at the workstation consoles. One set of activities will consist of standard data management services (DMS). DMS software includes text processing, spreadsheets, data base management, etc. Text processing was selected for the first intelligent interface prototype because text-processing software can be developed initially as fully functional but limited with a small set of commands. The program's complexity then can be increased incrementally. The intelligent interface includes the operator's behavior and three types of instructions to the underlying application software are included in the rule base. A conventional expert-system inference engine searches the data base for antecedents to rules and sends the consequents of fired rules as commands to the underlying software. Plans for putting the expert system on top of a second application, a database management system, will be carried out following behavioral research on the first application. The intelligent interface design is suitable for use with ground-based workstations now common in government, industrial, and educational organizations.

  14. The beneficial applications of nuclear technology: an educational project to disseminate knowledge and encourage research

    Energy Technology Data Exchange (ETDEWEB)

    Levy, Denise S., E-mail: denise@radioatividades.com.br [Omiccron Programacao Grafica Ltda (Omiccron P.G.), Atibaia, SP (Brazil)

    2013-07-01

    Nuclear technology is part of our everyday life and helps to improve the quality of our lifestyle in more ways than people realize. Nevertheless, the issue divides public opinion in Brazil and worldwide. There is still great misinformation about nuclear technology and peaceful uses of radiation. Most often, the media and social networks associate radiation to nuclear weapons or major accidents. Parents and teachers are often unaware of the matter. Any construction depends on a solid foundation and education is the foundation of every society. This project aims the dissemination of nuclear technology contents for teachers and students of Elementary and Secondary Education throughout Brazil. Whereas Internet access has increased strongly in Brazilian schools, this project provides various web-based short courses about nuclear technology and its beneficial applications in several areas, such as medicine, agriculture, industry and energy. The design, created according to modern concepts, presents different thematic roles which please children and youth. Since this project aims the dissemination of information, all courses are offered to the public at absolutely no cost. Still, the Project will provide a restricted area for teachers, with related material to develop in class. This educational project uses the combination of multiple technologies and last generation internet resources. All content can be accessed from any traditional internet connection, either for computers or mobile technologies. Our goal is to promote the benefits of nuclear technology for new generations, combating misinformation, omission of the media and knowledge fragmentation. Education transforms old prejudices and inspires new thoughts, stimulating development and encouraging scientific and technological research. (author)

  15. The beneficial applications of nuclear technology: an educational project to disseminate knowledge and encourage research

    International Nuclear Information System (INIS)

    Levy, Denise S.

    2013-01-01

    Nuclear technology is part of our everyday life and helps to improve the quality of our lifestyle in more ways than people realize. Nevertheless, the issue divides public opinion in Brazil and worldwide. There is still great misinformation about nuclear technology and peaceful uses of radiation. Most often, the media and social networks associate radiation to nuclear weapons or major accidents. Parents and teachers are often unaware of the matter. Any construction depends on a solid foundation and education is the foundation of every society. This project aims the dissemination of nuclear technology contents for teachers and students of Elementary and Secondary Education throughout Brazil. Whereas Internet access has increased strongly in Brazilian schools, this project provides various web-based short courses about nuclear technology and its beneficial applications in several areas, such as medicine, agriculture, industry and energy. The design, created according to modern concepts, presents different thematic roles which please children and youth. Since this project aims the dissemination of information, all courses are offered to the public at absolutely no cost. Still, the Project will provide a restricted area for teachers, with related material to develop in class. This educational project uses the combination of multiple technologies and last generation internet resources. All content can be accessed from any traditional internet connection, either for computers or mobile technologies. Our goal is to promote the benefits of nuclear technology for new generations, combating misinformation, omission of the media and knowledge fragmentation. Education transforms old prejudices and inspires new thoughts, stimulating development and encouraging scientific and technological research. (author)

  16. Review Article: Current Knowledge on Microarray Technology - An ...

    African Journals Online (AJOL)

    Abstract. The completion of whole genome sequencing projects has led to a rapid increase in the availability of genetic information. ... It has emerged as one of the most important technology in the field of molecular biology and transcriptomics.

  17. Global power knowledge science and technology in international affairs

    CERN Document Server

    Barth, Kai-Henrik

    2006-01-01

    Osiris annualy examines a particular topic in the history of science, bringing together experts in the field to consider multiple aspects of the time period, episode, or theme. Volume 21, Historical Perspectives on Science, Technology, and International Affairs, explores the ways in which scientists and issues in science and technology have played significant roles in foreign policy and international relations, especially since the Second World War.

  18. An empirical research on relationships between subjective judgement, technology acceptance tendency and knowledge transfer

    Science.gov (United States)

    Dai, Chien-Yun; Chen, Hsiao-Ming; Chen, Wan-Fei; Wu, Chia-Huei; Li, Guodong; Wang, Jiangtao

    2017-01-01

    The purpose of this study was to explore the relationships among employees' usage intention pertaining to mobile information devices, focusing on subjective judgement, technology acceptance tendency, information sharing behavior and information transfer. A research model was established to verify several hypotheses. The research model based on integrated concepts of knowledge management and technology acceptance modeling. Participants were employees of enterprises in Taiwan, selected by combining snowball and convenience sampling. Data obtained from 779 e-surveys. Multiple-regression analysis was employed for hypothesis verification. The results indicate that perceived ease-of-use of mobile devices was affected by computer self-efficacy and computer playfulness directly; meanwhile, perceived ease-of-use directly affects perceived usefulness. In addition, perceived ease-of-use and perceived usefulness can predict information-sharing behavior in a positive manner, and impact knowledge transfer as well. Based on the research findings, it suggested that enterprises should utilize mobile information devices to create more contact with customers and enrich their service network. In addition, it is recommended that managers use mobile devices to transmit key information to their staff and that they use these devices for problem-solving and decision-making. Further, the staff’s skills pertaining to the operation of mobile information devices and to fully implement their features are reinforced in order to inspire the users' knowledge transfer. Enhancing the playfulness of the interface is also important. In general, it is useful to promote knowledge transfer behavior within an organization by motivating members to share information and ideas via mobile information devices. In addition, a well-designed interface can facilitate employees' use of these devices. PMID:28886088

  19. An empirical research on relationships between subjective judgement, technology acceptance tendency and knowledge transfer.

    Science.gov (United States)

    Yuan, Yu-Hsi; Tsai, Sang-Bing; Dai, Chien-Yun; Chen, Hsiao-Ming; Chen, Wan-Fei; Wu, Chia-Huei; Li, Guodong; Wang, Jiangtao

    2017-01-01

    The purpose of this study was to explore the relationships among employees' usage intention pertaining to mobile information devices, focusing on subjective judgement, technology acceptance tendency, information sharing behavior and information transfer. A research model was established to verify several hypotheses. The research model based on integrated concepts of knowledge management and technology acceptance modeling. Participants were employees of enterprises in Taiwan, selected by combining snowball and convenience sampling. Data obtained from 779 e-surveys. Multiple-regression analysis was employed for hypothesis verification. The results indicate that perceived ease-of-use of mobile devices was affected by computer self-efficacy and computer playfulness directly; meanwhile, perceived ease-of-use directly affects perceived usefulness. In addition, perceived ease-of-use and perceived usefulness can predict information-sharing behavior in a positive manner, and impact knowledge transfer as well. Based on the research findings, it suggested that enterprises should utilize mobile information devices to create more contact with customers and enrich their service network. In addition, it is recommended that managers use mobile devices to transmit key information to their staff and that they use these devices for problem-solving and decision-making. Further, the staff's skills pertaining to the operation of mobile information devices and to fully implement their features are reinforced in order to inspire the users' knowledge transfer. Enhancing the playfulness of the interface is also important. In general, it is useful to promote knowledge transfer behavior within an organization by motivating members to share information and ideas via mobile information devices. In addition, a well-designed interface can facilitate employees' use of these devices.

  20. A Special Issue of the Canadian Journal of Learning and Technology on Knowledge Building

    Directory of Open Access Journals (Sweden)

    Michele Jacobsen

    2010-11-01

    Full Text Available In a pervasive media and technology landscape that is increasingly global, participatory and connected, one in which learners and teachers can increasingly become creators of knowledge rather than mere consumers of prepared messages and ideas, it is vital for the field of educational technology to take stock of the latest research on knowledge building. Marlene Scardamalia and Carl Bereiter, innovative pioneers in the area of Knowledge Building in education, define the construct of Knowledge Building as having several characteristics that distinguish it from constructivist learning in general. Two key characteristics of Knowledge Building are intentionality and community knowledge. Intentionality captures that people engaged in knowledge building know they are doing it and that advances in knowledge are purposeful. Community knowledge captures that while learning is a personal matter, knowledge building is done for the benefit of the community. Scardamalia and Bereiter emphasize that in contrast to being spontaneous, a knowledge building culture requires a supportive learning environment and teacher effort and artistry to create and maintain a community devoted to ideas and to idea improvement. Distinct from improving individual students’ ideas and understanding, the collective work of Knowledge Building is explicitly focused on the creation and improvement of knowledge of value to one’s community – advancement of the knowledge itself.

  1. Automated knowledge acquisition for second generation knowledge base systems: A conceptual analysis and taxonomy

    Energy Technology Data Exchange (ETDEWEB)

    Williams, K.E.; Kotnour, T.

    1991-01-01

    In this paper, we present a conceptual analysis of knowledge-base development methodologies. The purpose of this research is to help overcome the high cost and lack of efficiency in developing knowledge base representations for artificial intelligence applications. To accomplish this purpose, we analyzed the available methodologies and developed a knowledge-base development methodology taxonomy. We review manual, machine-aided, and machine-learning methodologies. A set of developed characteristics allows description and comparison among the methodologies. We present the results of this conceptual analysis of methodologies and recommendations for development of more efficient and effective tools.

  2. Automated knowledge acquisition for second generation knowledge base systems: A conceptual analysis and taxonomy

    Energy Technology Data Exchange (ETDEWEB)

    Williams, K.E.; Kotnour, T.

    1991-12-31

    In this paper, we present a conceptual analysis of knowledge-base development methodologies. The purpose of this research is to help overcome the high cost and lack of efficiency in developing knowledge base representations for artificial intelligence applications. To accomplish this purpose, we analyzed the available methodologies and developed a knowledge-base development methodology taxonomy. We review manual, machine-aided, and machine-learning methodologies. A set of developed characteristics allows description and comparison among the methodologies. We present the results of this conceptual analysis of methodologies and recommendations for development of more efficient and effective tools.

  3. ICT use in science and mathematics teacher education in Tanzan: Developing Technological Pedagogical Content Knowledge

    NARCIS (Netherlands)

    Kafyulilo, A.; Fisser, P.; Pieters, J.; Voogt, J.

    2015-01-01

    Currently, teacher education colleges in Tanzania are being equipped with computers to prepare teachers who can integrate technology in teaching. Despite these efforts, teachers are not embracing the use of technology in their teaching. This study adopted Technological Pedagogical Content Knowledge

  4. International technology and knowledge flows and capabilities in building in developing countries

    NARCIS (Netherlands)

    Egmond - de Wilde De Ligny, van E.L.C.; Kumaraswamy, M.M.

    2004-01-01

    Technological innovations in manufacturing were indicated to have an important impact on industry development. Innovation is seen as a cyclic process that includes not only the invention of technologies, but also the diffusion in terms of flows of technologies and knowledge, adoption, application,

  5. ICT Use in Science and Mathematics Teacher Education in Tanzania: Developing Technological Pedagogical Content Knowledge

    NARCIS (Netherlands)

    Kafyulilo, Ayoub; Fisser, Petra; Pieters, Julius Marie; Voogt, Joke

    2015-01-01

    Currently, teacher education colleges in Tanzania are being equipped with computers to prepare teachers who can integrate technology in teaching. Despite these efforts, teachers are not embracing the use of technology in their teaching. This study adopted Technological Pedagogical Content Knowledge

  6. Examining Educators' Knowledge, Beliefs, and Practices about Using Technology with Young Children

    Science.gov (United States)

    Fenty, Nicole S.; Anderson, Elizabeth McKendry

    2014-01-01

    Technology has been shown to foster children's motivation and interest in instructional materials. In addition, researchers have found that technology results in higher levels of student engagement and greater levels of comprehension. Researchers have also found that educators must have the knowledge and skills in technology necessary to…

  7. A Framework for the Application of Knowledge Technology to the ...

    African Journals Online (AJOL)

    Medical diagnosis and therapy constitute a network of inter-related processes. The conventional method of medical diagnosis and therapy of diseases involve the state space search of medical knowledge of diseases and patient history, which could be combinatorially explosive. This paper presents the report of the ...

  8. Solar based water treatment technologies

    International Nuclear Information System (INIS)

    Ahmad, I.; Hyder, M.J.

    2000-01-01

    In developing countries, the quality of drinking water is so poor that reports of 80% diseases from water-related causes is no surprise (Tebbet, 90). Frequently, there are reports in press of outbreak of epidemics in cities due to the unhygienic drinking-water. The state of affairs in the rural areas can be well imagined, where majority of the people live with no piped water. This paper describes the solar-based methods of removing organic pollutants from waste-water (also called Advanced Oxidation Technologies) and solar desalination. Experimental results of a simple solar water-sterilization technique have been discussed, along with suggestions to enhance the performance of this technique. (author)

  9. Perspectives for development of technologies, science, knowledge intensive business and personnel training on the Inter-disciplinary research complex in the L.N. Gumilev Eurasian State University base. Chapter 3

    International Nuclear Information System (INIS)

    2003-01-01

    In the Chapter 3 the problems of nano- and microstructures formation on the base on nuclear membranes are considered. The role of accelerating technique in the obtaining of nano- and microstructures is emphasized. In particular an importance of ion implantation synthesis of nano-size cluster structures (radiation defects, phase segregations) in a solid state matter volume; formation of metallic nano-structures (nano-wires and submicron tubes, nano-clusters on the solid state surfaces) with use nuclear technology on the track membranes base is noted. It is shown, that during study of the fundamental properties of radiation defects the DC-60 cyclotron allows to create in the material the cascades of atom-atom collisions. Creation and put into operation in the L.N. Gumilev Eurasian State University the DC-60 cyclotron gives possibility to formation of experimental and laboratory research bases for it collective use by researches, academics, students and postgraduates

  10. Technological development and knowledge as a source of increasing competitive advantage in Serbia

    Directory of Open Access Journals (Sweden)

    Milićević Zoran

    2014-01-01

    Full Text Available Today, in the era of knowledge economy a competitive advantage is based on technological development and innovation, as well as the exploitation of potential opportunities and possibilities for whose implementation knowledge is necessary. Constant investment in human capital increases productivity, employment and receives a direct source of innovation and longterm competitiveness. Human resources and their knowledge are the key to success for the economy and businesses, while incompetent workforce is one of the most important brake in their business. Development of competition in the domestic and international market, it became imperative for the development of a modern economy. In fact, knowledge is the capitalization of innovation through the creation of new products, services, processes, or labels, but that has no value and significance, if is not commercialized in the market. The aim of this paper is to show the level of competitiveness of the Serbian economy, measurable changes that occur in this direction and degree of easiness of doing business in Serbia, which should contribute to an increase in labor productivity.

  11. The Design of Individual Knowledge Sharing Platform Based on Blog for Online Information Literacy Education

    Science.gov (United States)

    Qun, Zeng; Xiaocheng, Zhong

    Knowledge sharing means that an individual, team and organization share the knowledge with other members of the organization in the course of activities through the various ways. This paper analyzes the obstacle factors in knowledge sharing based on the technical point, and chooses the Blog technology to build a platform for improving knowledge sharing between individuals. The construction of the platform is an important foundation for information literacy education, and it also can be used to achieve online information literacy education. Finally, it gives a detailed analysis of its functions, advantages and disadvantages.

  12. INIS as an information and knowledge resource for advanced nuclear technology studies

    International Nuclear Information System (INIS)

    Rashkova, N.

    2009-01-01

    and MS Excel. The preparation of topical collections for specific conferences, targeting specific users provides highly specialized information and helps the more efficient use of the system. INIS and NKM Section is also a part of the IAEA Nuclear Knowledge Preservation project with contributions in the Fast Reactor Knowledge Preservation Initiative; Fast Reactor Knowledge base and Technology Advances in Fast Reactors and Accelerator Driven Systems, providing valuable information and knowledge resources for its users and assisting in accumulation and preservation of nuclear knowledge and expertise. (author)

  13. New Technological Interventions in Conservation Conflicts: Countering Emotions and Contested Knowledge.

    Science.gov (United States)

    Verma, Audrey; van der Wal, René; Fischer, Anke

    2017-01-01

    New technologies have increasingly featured in environmental conservation conflicts. We examined the deployment of imaging devices such as sonar equipment and cameras to survey the Fal estuary in Cornwall, UK. Due to heavy use of these waters, there have been several disputes coalescing around protected marine features, including the estuary's rare maerl beds. A comparison of two cases, scallop dredging and docks development, showed technical instruments being deployed to produce information about the marine environment as evidence to inform decision-making. The use of imaging devices stimulated political action and was regarded as a move away from emotion-based decision-making towards desired objectivity. Simultaneously, however, the process of deploying these devices was challenged and there was recognition that the resultant information could be used to construct the estuary as a politically charged space. Thus, rather than clarifying and resolving contentious issues, technological interventions generated new baselines for knowledge contestation and amplified ongoing battles for credibility and authority.

  14. Compiling knowledge-based systems from KEE to Ada

    Science.gov (United States)

    Filman, Robert E.; Bock, Conrad; Feldman, Roy

    1990-01-01

    The dominant technology for developing AI applications is to work in a multi-mechanism, integrated, knowledge-based system (KBS) development environment. Unfortunately, systems developed in such environments are inappropriate for delivering many applications - most importantly, they carry the baggage of the entire Lisp environment and are not written in conventional languages. One resolution of this problem would be to compile applications from complex environments to conventional languages. Here the first efforts to develop a system for compiling KBS developed in KEE to Ada (trademark). This system is called KATYDID, for KEE/Ada Translation Yields Development Into Delivery. KATYDID includes early prototypes of a run-time KEE core (object-structure) library module for Ada, and translation mechanisms for knowledge structures, rules, and Lisp code to Ada. Using these tools, part of a simple expert system was compiled (not quite automatically) to run in a purely Ada environment. This experience has given us various insights on Ada as an artificial intelligence programming language, potential solutions of some of the engineering difficulties encountered in early work, and inspiration on future system development.

  15. Examining the Impact of Educational Technology Courses on Pre-Service Teachers' Development of Technological Pedagogical Content Knowledge

    Science.gov (United States)

    Hsu, Pi-Sui

    2012-01-01

    The purpose of this qualitative study was to examine the impact of educational technology courses on pre-service teachers' development of knowledge of technology integration in a teacher preparation program in the USA. The present study was conducted with eight pre-service teachers enrolled in the elementary teacher education program at a large…

  16. Predictive Power of Prospective Physical Education Teachers' Attitudes towards Educational Technologies for Their Technological Pedagogical Content Knowledge

    Science.gov (United States)

    Varol, Yaprak Kalemoglu

    2015-01-01

    The aim of the research is to determine the predictive power of prospective physical education teachers' attitudes towards educational technologies for their technological pedagogical content knowledge. In this study, a relational research model was used on a study group that consisted of 529 (M[subscript age]=21.49, SD=1.44) prospective physical…

  17. Knowledge-Basing Teaching Professions and Professional Practice

    DEFF Research Database (Denmark)

    Thingstrup, Signe Hvid

    This paper discusses the demand for knowledge-based practice and two different answers to this demand, namely evidence-based thinking and critical-political thinking. The paper discusses the implications these have for views on knowledge and professional development. The paper presents and discus...

  18. Knowledge-Based Approaches: Two cases of applicability

    DEFF Research Database (Denmark)

    Andersen, Tom

    1997-01-01

    Basic issues of the term: A knowledge-based approach (KBA) are discussed. Two cases of applicable to KBA are presented, and its concluded that KBA is more than just IT.......Basic issues of the term: A knowledge-based approach (KBA) are discussed. Two cases of applicable to KBA are presented, and its concluded that KBA is more than just IT....

  19. Transition to knowledge-based economy in Saudi Arabia

    NARCIS (Netherlands)

    Nour, S.

    2014-01-01

    This paper discusses the progress in transition to knowledge-based economy in Saudi Arabia. As for the methodology, this paper uses updated secondary data obtained from different sources. It uses both descriptive and comparative approaches and uses the OECD definition of knowledge-based economy and

  20. A knowledge-based approach for recognition of handwritten Pitman ...

    Indian Academy of Sciences (India)

    The paper describes a knowledge-based approach for the recognition of PSL strokes. Information about location and the direction of the starting point and final point of strokes are considered the knowledge base for recognition of strokes. The work comprises preprocessing, determination of starting and final points, ...

  1. Identifying the professional knowledge base for multi-grade teaching ...

    African Journals Online (AJOL)

    This paper reports a small-scale qualitative study of teachers and teaching principals in multi-grade rural schools in Australia, focusing on identifying the professional knowledge base required for teachers in such contexts. Such a knowledge base is essential for improving the quality of multi-grade teaching. Interviews and ...

  2. Identifying Qualitative Factors Affecting the Production and Distribution of Information and Knowledge in Science and Technology Parks of Iran

    Directory of Open Access Journals (Sweden)

    Ali Haji Shamsaei

    2017-06-01

    Full Text Available This study was conducted in order to identity Qualitative factors affecting the production and distribution of information and knowledge in science and technology parks of Iran. The research was Applied Research in which, qualitative method was carried out. The population of the study was included of 10 managers of Knowledge-based Companies. The data was collected from the population using semi-structured and in-depth interviews. For data analysis, content analysis was used. Results of the qualitative factors affecting the production and distribution of information and knowledge in science and technology parks of Iran, led to extraction of 39 components which were classified in four categories: I Foreign and domestic policy, II Financial and economic support, III Infrastructure barriers and IV Cultural barriers. Results howed that overcoming the political, financial and economic, infrastructural and cultural barriers has undeniable impact on production and distribution of information and knowledge.

  3. The Mediating Role of Knowledge Sharing on Information Technology and Innovation

    Directory of Open Access Journals (Sweden)

    Onwika Kaewchur

    2013-12-01

    Full Text Available This study aims to investigate the relationship between information technology, knowledge sharing, and a firm’s innovation. Knowledge sharing as a mediating effect is also simultaneously investigated with regard to the relationship between information technology and a firm’s innovation. In this research, the quantitative method was mainly employed. The data was collected with a survey. A total of 224 respondents from herbal manufacturing companies were included in the research. The results presented in this paper demonstrate that knowledge sharing and information technology can critically influence the organization’s innovation and can play a vital role as a significant success factor in this process.

  4. Using/designing Digital Technologies Of Representation In Aboriginal Australian Knowledge Practices

    Directory of Open Access Journals (Sweden)

    Helen Verran

    2007-01-01

    Full Text Available Indigenous Australians are often keen to use digital technologies in their struggle to develop sustainable livelihoods on their own lands. This paper tells of gradually coming to recognize how an Aboriginal Australian elder struggled against the grain of digital technologies designed to represent, in using them in Aboriginal Australian knowledge practices where knowledge is always actively performative rather than representional. The performance of Aboriginal knowledge must express the remaking of an ancestral reality. At the same time, this man exploited possibilities the technologies offered for representation in achieving political ends in dealing with representatives of mainstream Australia.

  5. Implementation of knowledge-based engineering methodology in hydraulic generator design

    Directory of Open Access Journals (Sweden)

    Wei Guo

    2015-05-01

    Full Text Available Hydraulic generator design companies are always being exhorted to become more competitive by reducing the lead time and costs for their products for survival. Knowledge-based engineering technology is a rapidly developing technology with competitive advantage for design application to reduce time and cost in product development. This article addresses the structure of the hydraulic generator design system based on the knowledge-based engineering technology in detail. The system operates by creating a unified knowledge base to store the scattered knowledge among the whole life of the design process, which was contained in the expert’s brain and technical literature. It helps designers to make appropriate decisions by supplying necessary information at the right time through query and inference engine to represent the knowledge within the knowledge-based engineering application framework. It also integrates the analysis tools into one platform to help achieve global optimum solutions. Finally, an example of turbine-type selection was given to illustrate the operation process and prove its validity.

  6. Knowledge Management in Role Based Agents

    Science.gov (United States)

    Kır, Hüseyin; Ekinci, Erdem Eser; Dikenelli, Oguz

    In multi-agent system literature, the role concept is getting increasingly researched to provide an abstraction to scope beliefs, norms, goals of agents and to shape relationships of the agents in the organization. In this research, we propose a knowledgebase architecture to increase applicability of roles in MAS domain by drawing inspiration from the self concept in the role theory of sociology. The proposed knowledgebase architecture has granulated structure that is dynamically organized according to the agent's identification in a social environment. Thanks to this dynamic structure, agents are enabled to work on consistent knowledge in spite of inevitable conflicts between roles and the agent. The knowledgebase architecture is also implemented and incorporated into the SEAGENT multi-agent system development framework.

  7. Consultancy on 'Knowledge preservation in the area of fast reactor technology'. Working material

    International Nuclear Information System (INIS)

    2002-01-01

    were to define the scope of the fast reactor knowledge preservation efforts (what should be preserved), and to produce a road map for the implementation of these efforts, eventually leading to the mentioned knowledge base. The most important topics in which fast reactor technology knowledge preservation is needed are: fuel and materials; reactor physics and core design; operation; and the demonstration of safety

  8. Assessing the Gap: The MBA and Information Technology Management Knowledge

    Science.gov (United States)

    Murphy, John B.

    2012-01-01

    One of the most prevalent themes for managers in nearly all industries is the impact of Information Technology on the organization's value chain. Direct and indirect IT costs comprise a significant portion of operating expenses for most businesses and constitute an estimated 50% of all capital expenditures. Understanding whether and to what…

  9. TheBrain Technologies Corporation: Collapsing the Time to Knowledge.

    Science.gov (United States)

    Misek, Marla

    2003-01-01

    TheBrain was created to take advantage of the most powerful information processor in existence - the human mind. Explains products of TheBrain Technologies Corporation,, which has developed computer interfaces to help individual users and corporations organize information in ways that make sense to them in the proper context. Describes a…

  10. Learning in the Knowledge Economy: The Role of Technology

    Science.gov (United States)

    Jaffrin, Manuel

    2003-01-01

    Internet is not the panacea for every problem in education but we must realize that this is a great tool that can help us empower every student and elevate each individual to new levels of intellectual capacity and skills. Combined with specifics learning objectives, it will definitely change the face of education. Technology is becoming an…

  11. Knowledge Societies ... In a Nutshell: Information Technology for ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The Information Revolution and the accelerating spread of information and communication technologies (ICTs) are at the heart of recent societal transformations around the world. Developing countries in particular are now being encouraged to invest in national ICT infrastructure so that they might experience the expected ...

  12. Advantage of nuclear knowledge for the new technologies

    International Nuclear Information System (INIS)

    Legaz, R.

    2002-01-01

    Gathered experiences by several companies related with the nuclear sector, have let us to face up with reliability and optimism, the challenge to undertake other energy experiences with new technologies. As a result of this combined strategy, we have succeeded to keep up the existence and companies development that compete and stand out from a more divers and globalized energetic world. (Author)

  13. Knowledge management method for knowledge based BWR Core Operation Management System

    Energy Technology Data Exchange (ETDEWEB)

    Wada, Yutaka; Fukuzaki, Takaharu; Kobayashi, Yasuhiro

    1989-03-01

    A knowledge management method is proposed to support an except whose knowledge is stored in a knowledge base in the BWR Core Operation Management System. When the alterations in the operation plans are motivated by the expert after evaluating them, the method attempts to find the knowledge which must be modified and to give the expert guidances. In this way the resultant operation plans are improved by modifying values of referenced data. Using data dependency among data, which are defined and referred during inference, data to be modified are retrieved. In generating modification guidances, data reference and definition procedures are classified by syntactic analysis of knowledge. The modified data values are calculated with a sensitivity between the increment in the data to be modified and the resultant one in the performance of operation plans. The efficiency of the knowledge management by the proposed method, when applied to the knowledge based system including 500 pieces of knowledge for BWR control rod programming, is higher than that for interactive use of existing general purpose editors. (author).

  14. Knowledge management method for knowledge based BWR Core Operation Management System

    International Nuclear Information System (INIS)

    Wada, Yutaka; Fukuzaki, Takaharu; Kobayashi, Yasuhiro

    1989-01-01

    A knowledge management method is proposed to support an except whose knowledge is stored in a knowledge base in the BWR Core Operation Management System. When the alterations in the operation plans are motivated by the expert after evaluating them, the method attempts to find the knowledge which must be modified and to give the expert guidances. In this way the resultant operation plans are improved by modifying values of referenced data. Using data dependency among data, which are defined and referred during inference, data to be modified are retrieved. In generating modification guidances, data reference and definition procedures are classified by syntactic analysis of knowledge. The modified data values are calculated with a sensitivity between the increment in the data to be modified and the resultant one in the performance of operation plans. The efficiency of the knowledge management by the proposed method, when applied to the knowledge based system including 500 pieces of knowledge for BWR control rod programming, is higher than that for interactive use of existing general purpose editors. (author)

  15. Towards Modeling False Memory With Computational Knowledge Bases.

    Science.gov (United States)

    Li, Justin; Kohanyi, Emma

    2017-01-01

    One challenge to creating realistic cognitive models of memory is the inability to account for the vast common-sense knowledge of human participants. Large computational knowledge bases such as WordNet and DBpedia may offer a solution to this problem but may pose other challenges. This paper explores some of these difficulties through a semantic network spreading activation model of the Deese-Roediger-McDermott false memory task. In three experiments, we show that these knowledge bases only capture a subset of human associations, while irrelevant information introduces noise and makes efficient modeling difficult. We conclude that the contents of these knowledge bases must be augmented and, more important, that the algorithms must be refined and optimized, before large knowledge bases can be widely used for cognitive modeling. Copyright © 2016 Cognitive Science Society, Inc.

  16. Project-Based Learning in Electronic Technology: A Case Study

    Science.gov (United States)

    Li, Li

    2015-01-01

    A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

  17. Analysis of Russia's biofuel knowledge base: A comparison with Germany and China

    International Nuclear Information System (INIS)

    Kang, Jin-Su; Kholod, Tetyana; Downing, Stephen

    2015-01-01

    This study assesses the evolutionary trajectory of the knowledge base of Russian biofuel technology compared to that of Germany, one of the successful leaders in adopting renewable energy, and China, an aggressive latecomer at promoting renewable energy. A total of 1797 patents filed in Russia, 8282 in Germany and 20,549 in China were retrieved from the European Patent Office database through 2012. We identify four collectively representative measures of a knowledge base (size, growth, cumulativeness, and interdependence), which are observable from biofuel patent citations. Furthermore, we define the exploratory–exploitative index, which enables us to identify the nature of learning embedded in the knowledge base structure. Our citation network analysis of the biofuel knowledge base trajectory by country, in conjunction with policy milestones, shows that Russia's biofuel knowledge base lacks both the increasing technological specialization of that in Germany and the accelerated growth rate of that in China. The German biofuel citation network shows a well-established knowledge base with increasing connectivity, while China's has grown exceptionally fast but with a sparseness of citations reflecting limited connections to preceding, foundational technologies. We conclude by addressing policy implications as well as limitations of the study and potential topics to explore in future research. -- Highlights: •Biofuel knowledge base (KB) of Russia is compared to those of Germany and China. •Citations network analysis measures KB size, growth, cumulativeness, and interdependence. •Russian KB lacks the increasing technological specialization of German KB. •Russia KB lacks the accelerated growth rate of Chinese KB. •Russia KB evolution reflects the poor institutional framework

  18. Knowledge management in a waste based biorefinery in the QbD paradigm.

    Science.gov (United States)

    Rathore, Anurag S; Chopda, Viki R; Gomes, James

    2016-09-01

    Shifting resource base from fossil feedstock to renewable raw materials for production of chemical products has opened up an area of novel applications of industrial biotechnology-based process tools. This review aims to provide a concise and focused discussion on recent advances in knowledge management to facilitate efficient and optimal operation of a biorefinery. Application of quality by design (QbD) and process analytical technology (PAT) as tools for knowledge creation and management at different levels has been highlighted. Role of process integration, government policies, knowledge exchange through collaboration, and use of databases and computational tools have also been touched upon. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Marine Forces Reserve: Accelerating Knowledge Flow through Asynchronous Learning Technologies

    Science.gov (United States)

    2014-12-19

    pedagogic techniques that are infeasible in the classroom, and they suggest that in some respects technologically intermediated learning can be even better...appropriate for this research (Yin, 1994). We employ multiple techniques for data collection in the field. Foremost, through a unique relationship between...initial interpretations are both grounded firmly in the data and meaningful to organization participants. The Researchers’ relationship with the focal

  20. Biological knowledge management: the emerging role of the Semantic Web technologies.

    Science.gov (United States)

    Antezana, Erick; Kuiper, Martin; Mironov, Vladimir

    2009-07-01

    New knowledge is produced at a continuously increasing speed, and the list of papers, databases and other knowledge sources that a researcher in the life sciences needs to cope with is actually turning into a problem rather than an asset. The adequate management of knowledge is therefore becoming fundamentally important for life scientists, especially if they work with approaches that thoroughly depend on knowledge integration, such as systems biology. Several initiatives to organize biological knowledge sources into a readily exploitable resourceome are presently being carried out. Ontologies and Semantic Web technologies revolutionize these efforts. Here, we review the benefits, trends, current possibilities, and the potential this holds for the biosciences.

  1. Poor need knowledge not only technology to bridge digital divide: experts

    CERN Multimedia

    2003-01-01

    "Developing countries need to gain knowledge rather than technology to latch onto the booming information society, experts said Monday ahead of a major conference on bridging the digital divide between rich and poor" (1/2 page).

  2. A PROCESS-BASED APPROACH TO KNOWLEDGE MANAGEMENT

    OpenAIRE

    Kovačić, Andrej; Bosilj Vukšić, Vesna; Lončar, Anita

    2006-01-01

    This paper analyses the relationship between business process modelling, knowledge management and information systems development projects. The paper’s main objective is to present business rules as the encoded knowledge of corporate business practices. Further, it introduces a rule-based business activity meta-model as a repository in which business knowledge can be captured and traced from their origin in the business environment through to their implementation in information systems. The c...

  3. Knowledge-based engineering of a PLC controlled telescope

    Science.gov (United States)

    Pessemier, Wim; Raskin, Gert; Saey, Philippe; Van Winckel, Hans; Deconinck, Geert

    2016-08-01

    As the new control system of the Mercator Telescope is being finalized, we can review some technologies and design methodologies that are advantageous, despite their relative uncommonness in astronomical instrumentation. Particular for the Mercator Telescope is that it is controlled by a single high-end soft-PLC (Programmable Logic Controller). Using off-the-shelf components only, our distributed embedded system controls all subsystems of the telescope such as the pneumatic primary mirror support, the hydrostatic bearing, the telescope axes, the dome, the safety system, and so on. We show how real-time application logic can be written conveniently in typical PLC languages (IEC 61131-3) and in C++ (to implement the pointing kernel) using the commercial TwinCAT 3 programming environment. This software processes the inputs and outputs of the distributed system in real-time via an observatory-wide EtherCAT network, which is synchronized with high precision to an IEEE 1588 (PTP, Precision Time Protocol) time reference clock. Taking full advantage of the ability of soft-PLCs to run both real-time and non real-time software, the same device also hosts the most important user interfaces (HMIs or Human Machine Interfaces) and communication servers (OPC UA for process data, FTP for XML configuration data, and VNC for remote control). To manage the complexity of the system and to streamline the development process, we show how most of the software, electronics and systems engineering aspects of the control system have been modeled as a set of scripts written in a Domain Specific Language (DSL). When executed, these scripts populate a Knowledge Base (KB) which can be queried to retrieve specific information. By feeding the results of those queries to a template system, we were able to generate very detailed "browsable" web-based documentation about the system, but also PLC software code, Python client code, model verification reports, etc. The aim of this paper is to

  4. Knowledge sharing and innovation in relationships interorganizational type of information technology outsourcing

    OpenAIRE

    Roberta Rodrigues Faoro; Mírian Oliveira; Marcelo Faoro de Abreu

    2017-01-01

    Introduction: this paper presents an analysis of the sharing of knowledge and innovation in the inter-relationships of the type outsourcing of Information Technology. Objective: analyze the existence of relationship between knowledge sharing and innovation in the inter-relationships of the type of outsourcing information technology (IT). Methodology: research is exploratory, qualitative and using as a strategy the multiple case study, which analyzed 12 companies in IT outsourci...

  5. A Representation System User Interface for Knowledge Base Designers

    OpenAIRE

    Fikes, Richard E.

    1982-01-01

    A major strength of frame-based knowledge representation languages is their ability to provide the knowledge base designer with a concise and intuitively appealing means expression. The claim of intuitive appeal is based on the observation that the object -centered style of description provided by these languages often closely matches a designer's understanding of the domain being modeled and therefore lessens the burden of reformulation involved in developing a formal description. To be effe...

  6. Knowledge based assessment of intestinal parasitic Infections ...

    African Journals Online (AJOL)

    There is an apparent lack of information on the risk and clinical symptoms of Intestinal Parasitic Infections (IPIs) among students attending boarding secondary schools in Ebonyi State, Nigeria. This questionnaire-based survey attempts to assess some behavioural habits, possible risk factor(s) as well as clinical symptoms ...

  7. Experiences in Preserving Design Bases & Knowledge Management

    International Nuclear Information System (INIS)

    Koshy, Thomas

    2013-01-01

    Purpose: • To build repository of information on design and development in a retrievable manner to: • Establish licensing/design bases of the plant; • Identify the known vulnerabilities and how they are to be addressed; • Prevent undoing the lessons learned; • Facilitate advancement without repeating the undesirable incidents of the past

  8. Knowledge-based and model-based hybrid methodology for comprehensive waste minimization in electroplating plants

    Science.gov (United States)

    Luo, Keqin

    1999-11-01

    The electroplating industry of over 10,000 planting plants nationwide is one of the major waste generators in the industry. Large quantities of wastewater, spent solvents, spent process solutions, and sludge are the major wastes generated daily in plants, which costs the industry tremendously for waste treatment and disposal and hinders the further development of the industry. It becomes, therefore, an urgent need for the industry to identify technically most effective and economically most attractive methodologies and technologies to minimize the waste, while the production competitiveness can be still maintained. This dissertation aims at developing a novel WM methodology using artificial intelligence, fuzzy logic, and fundamental knowledge in chemical engineering, and an intelligent decision support tool. The WM methodology consists of two parts: the heuristic knowledge-based qualitative WM decision analysis and support methodology and fundamental knowledge-based quantitative process analysis methodology for waste reduction. In the former, a large number of WM strategies are represented as fuzzy rules. This becomes the main part of the knowledge base in the decision support tool, WMEP-Advisor. In the latter, various first-principles-based process dynamic models are developed. These models can characterize all three major types of operations in an electroplating plant, i.e., cleaning, rinsing, and plating. This development allows us to perform a thorough process analysis on bath efficiency, chemical consumption, wastewater generation, sludge generation, etc. Additional models are developed for quantifying drag-out and evaporation that are critical for waste reduction. The models are validated through numerous industrial experiments in a typical plating line of an industrial partner. The unique contribution of this research is that it is the first time for the electroplating industry to (i) use systematically available WM strategies, (ii) know quantitatively and

  9. The Underdetermined Knowledge-Based Theory of the MNC

    DEFF Research Database (Denmark)

    Fransson, Anders; Håkanson, Lars; W. Liesch, Peter

    2011-01-01

    In this note we revisit two core propositions of the knowledge-based view of the firm found in the seminal work of Kogut and Zander: (1) that multinational corporations (MNCs) exist because transfers and re-combinations of knowledge occur more efficiently inside MNCs than between MNCs and third...... parties; and (2) that the threat of opportunism is not necessary, although it may be sufficient, to explain the existence of the MNC. Their knowledge-based view shifted the conceptualization of the firm from an institution arising from market failure and transaction costs economizing to a progeny......-combination of knowledge among their members. Important insights may be gained by applying the concept of epistemic communities implicit in the knowledge-based perspective beyond firm-level hierarchies....

  10. Knowledge-based automated radiopharmaceutical manufacturing for Positron Emission Tomography

    International Nuclear Information System (INIS)

    Alexoff, D.L.

    1991-01-01

    This article describes the application of basic knowledge engineering principles to the design of automated synthesis equipment for radiopharmaceuticals used in Positron Emission Tomography (PET). Before discussing knowledge programming, an overview of the development of automated radiopharmaceutical synthesis systems for PET will be presented. Since knowledge systems will rely on information obtained from machine transducers, a discussion of the uses of sensory feedback in today's automated systems follows. Next, the operation of these automated systems is contrasted to radiotracer production carried out by chemists, and the rationale for and basic concepts of knowledge-based programming are explained. Finally, a prototype knowledge-based system supporting automated radiopharmaceutical manufacturing of 18FDG at Brookhaven National Laboratory (BNL) is described using 1stClass, a commercially available PC-based expert system shell

  11. KNOWLEDGE BASE AND EFL TEACHER EDUCATION PROGRAMS: A COLOMBIAN PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    Yamith Fandiño

    2013-04-01

    Full Text Available In the 21st century, Colombian pre-service EFL Teacher Education Programs (TEPs should study what constitutes the core knowledge base for language teachers to be effective in their profession. These programs must refrain from simply conceptualizing knowledge base as the acquisition of the basic skills required for teaching, the competency of educators in their subject matter area, and the use of pedagogical skills. Instead, they should strive to reflect on what Colombian language teachers need to know about teaching and learning, and study how their knowledge, beliefs, and attitudes inform their practices. A starting point to do so is to interpret the variety of proposals that have been generated through the years in the field. This paperoffers a review of what teacher knowledge base is, presents an overview of how Colombian EFL TEPs are working on teacher knowledge,and suggests some strategies to envision a more complete framework of reference for teacher formation in Colombia.

  12. The role of scientific knowledge in the public's perceptions of energy technology risks

    International Nuclear Information System (INIS)

    Stoutenborough, James W.; Vedlitz, Arnold

    2016-01-01

    It is important for policy makers to have an accurate understanding of public attitudes toward pressing issues to help inform their decision making. Researchers consistently find that the public’s receipt of and correct processing of scientific information and knowledge are essential for its problem solving. Different levels of understanding of specific energy technologies may produce different risk assessments across technologies within this issue domain. How this differential risk assessment occurs and the role that scientific information may play in it is not yet well known. This project seeks to determine the role that perceived and objective scientific knowledge may play in the public’s risk assessments of different energy technologies. Our findings suggest that scientific knowledge does temper public risk evaluations of different energy technologies, therefore linking more clearly the connection between science knowledge, scientific trust, and issue problem identification. - Highlights: •We examine influence of assessed and perceived knowledge on public risk perceptions. •We model effect of knowledge type on publics’ perceptions of three energy risks. •All models show those with higher assessed knowledge see risks more like experts do. •Perceived knowledge is less reliable predictor of public rating risk like experts. •Greater scientific grasp of issues by public needed for accurate risk assessment.

  13. Pre-Service Teachers' Perceptions and Beliefs of Technological Pedagogical Content Knowledge on Algebra

    Science.gov (United States)

    Lin, Cheng-Yao; Kuo, Yu-Chun; Ko, Yi-Yin

    2015-01-01

    The purpose of this study was to investigate elementary pre-service teachers' content knowledge in algebra (Linear Equation, Quadratic Equation, Functions, System Equations and Polynomials) as well as their technological pedagogical content knowledge (TPACK) in teaching algebra. Participants were 79 undergraduate pre-service teachers who were…

  14. Creating communities of practices to manage technological knowledge : An evaluation study at Rolls-Royce

    NARCIS (Netherlands)

    Meeuwesen, Bas; Berends, Hans

    2007-01-01

    Purpose - In large companies, technological knowledge lies dispersed over individual specialists, business units and locations. Communities of practice (CoPs) are a structure for sharing this dispersed knowledge. However, CoPs are usually seen as being emergent, evolving and elusive. This study aims

  15. Report on our activities to spread knowledge about radiation in Musashi Institute of Technology

    International Nuclear Information System (INIS)

    Okada, Yukiko

    2007-01-01

    In Musashi Institute of Technology, radiation knowledge spread activities are performed twice per year. One is 'the science experience classroom which children enjoy.' Another is 'the open school which studies atomic power'. The writer participated in the 'life and radiation' project as a WEN member, and has performed the radiation knowledge spread activities to a citizen. In this paper, these activities are introduced and the necessity and problem of radiation knowledge spread activities are considered. (author)

  16. How Case-Based Reasoning on e-Community Knowledge Can Be Improved Thanks to Knowledge Reliability

    OpenAIRE

    Gaillard , Emmanuelle; Lieber , Jean; Nauer , Emmanuel; Cordier , Amélie

    2014-01-01

    International audience; This paper shows that performing case-based reasoning (CBR) on knowledge coming from an e-community is improved by taking into account knowledge reliability. MKM (meta-knowledge model) is a model for managing reliability of the knowledge units that are used in the reasoning process. For this, MKM uses meta-knowledge such as belief, trust and reputation, about knowledge units and users. MKM is used both to select relevant knowledge to conduct the reasoning process, and ...

  17. Knowledge-based operator guidance system for Japanese PWRs

    International Nuclear Information System (INIS)

    Fujita, Y.; Ito, K.; Kawanago, S.; Tani, M.; Murata, R.

    1986-01-01

    A knowledge-based operator support system for nuclear power plant operation is under development. The main theme of the study is the incorporation of operator's cognitive structure as the framework of the knowledge representation and inference control mechanisms. Based upon information collected from interviews, and experiments using a real-time simulator, an operator's model related to diagnostic tasks was developed. A knowledge-based system incorporating the proposed model demonstrated highly efficient problem solving capabilities and the dynamic fitness to operator's perceptual feeling, thereby suggesting the potential importance and practical benefit of such a study

  18. FROM TRADITIONAL ACCOUNTING TO KNOWLEDGE BASED ACCOUNTING ORGANIZATIONS

    Directory of Open Access Journals (Sweden)

    NICOLETA RADNEANTU

    2010-01-01

    Full Text Available Nowadays, we may observe that the rules of traditional economy have changed. The new economy – the knowledge based economy determine also major change in organizations resources, structure, strategic objectives, departments, accounting, goods. In our research we want to underline how the accounting rules, regulations and paradigms have changed to cope with political, economic and social challenges, as well as to the emergence of knowledge based organization. We also try to find out where Romanian accounting is on the hard road of evolution from traditional to knowledge based.

  19. The use of information technologies for knowledge sharing by secondary healthcare organisations in New Zealand.

    Science.gov (United States)

    Ali, Nor'ashikin; Whiddett, Dick; Tretiakov, Alexei; Hunter, Inga

    2012-07-01

    To explore the extent of use of information technologies (ITs) for knowledge sharing by secondary healthcare organisations in New Zealand. We used a self-administered questionnaire to survey Chief Information Officers at all 21 of New Zealand's District Health Boards regarding the extent to which their organisations use knowledge sharing activities involving ITs. The list of activities to include in the questionnaire was compiled by reviewing the literature. We analysed the extent of use of the knowledge sharing activities using descriptive statistics, repeated measures ANOVA, and correlation analysis. The response rate was 76%. Although all the responding organisations reported using ITs to share knowledge, they used ITs to share documents significantly more than to support discussions or to connect employees to experts. Discussions via teleconferencing, videoconferencing, and email lists were significantly more common than discussions via social media technologies: electronic discussion forums, blogs, and on-line chatrooms. There were significant positive correlations between publishing and accessing documents, between using teleconferencing and using videoconferencing, and between publishing and finding contact details of experts. New Zealand's District Health Boards are using a range of ITs to share knowledge. Knowledge sharing activities emphasising the sharing of explicit knowledge (via exchanging documents in electronic form) are significantly more common than knowledge sharing activities emphasising the sharing of tacit knowledge (via technology-mediated discussions and via using technology to connect employees to experts). In view of the evidence in the literature that information technology may be highly effective in supporting tacit knowledge exchanges, our results suggest that health organisations should consider greater adoption of ITs for sharing tacit knowledge. The finding that several organisations are currently making extensive use of

  20. Formal Support for Development of Knowledge-Based Systems

    NARCIS (Netherlands)

    Fensel, Dieter; Van Harmelen, Frank; Reif, Wolfgang; Ten Teije, Annette

    1998-01-01

    This article provides an approach for developing reliable knowledge-based systems. Its main contributions are: Specification is done at an architectural level that abstracts from a specific implementation formalism. The model of expertise of CommonKADS distinguishs different types of knowledge and

  1. Knowledge-Based Hierarchies: Using Organizations to Understand the Economy

    Science.gov (United States)

    Garicano, Luis; Rossi-Hansberg, Esteban

    2015-01-01

    Incorporating the decision of how to organize the acquisition, use, and communication of knowledge into economic models is essential to understand a wide variety of economic phenomena. We survey the literature that has used knowledge-based hierarchies to study issues such as the evolution of wage inequality, the growth and productivity of firms,…

  2. Knowledge base combinations and innovation performance in Swedish regions

    Czech Academy of Sciences Publication Activity Database

    Grillitsch, M.; Martin, R.; Srholec, Martin

    2017-01-01

    Roč. 93, č. 5 (2017), s. 458-479 ISSN 0013-0095 Institutional support: Progres-Q24 Keywords : knowledge base * knowledge combination * region Subject RIV: AH - Economics OBOR OECD: Applied Economics, Econometrics Impact factor: 5.344, year: 2016

  3. Knowledge base combinations and innovation performance in Swedish regions

    Czech Academy of Sciences Publication Activity Database

    Grillitsch, M.; Martin, R.; Srholec, Martin

    2017-01-01

    Roč. 93, č. 5 (2017), s. 458-479 ISSN 0013-0095 Institutional support: RVO:67985998 Keywords : knowledge base * knowledge combination * region Subject RIV: AH - Economics OBOR OECD: Applied Economics, Econometrics Impact factor: 5.344, year: 2016

  4. Project-based knowledge in organizing open innovation

    CERN Document Server

    Comacchio, Anna; Pizzi, Claudio

    2014-01-01

    Enriching understanding of the current theoretical debate on project-based open innovation, ‘Project-based Knowledge in Organizing Open Innovation’ draws on innovation management literature and knowledge-based perspectives to investigate the relationship between knowledge development at project level and the strategic organization of open innovation. Addressing the still open issue of how the firm level should be complemented by studies at the project level of analysis, this book provides theoretical and empirical arguments on the advantages of a more fine-grained level of analysis to understand how firms organize their innovation processes across boundaries. The book also addresses the emerging interest in the management literature on project-based organizations, and on the relevance of project forms of organizing in a knowledge-based economy. Through field research in different industrial settings , this book provides empirical evidence on how firms design open innovation project-by-project and it will ...

  5. Visualizing the Knowledge Domain of Nanoparticle Drug Delivery Technologies: A Scientometric Review

    Directory of Open Access Journals (Sweden)

    Yen-Chun Lee

    2016-01-01

    Full Text Available The scientific literature of nanoparticle drug delivery technologies (NDDT between 2005 and 2014 was reviewed. The visualized co-citation network of its knowledge domain was characterized in terms of thematic concentrations of co-cited references and emerging trends of surging keywords and citations to references through a scientometric review. The combined dataset of 25,171 bibliographic records were constructed through topic search and citation expansion to ensure adequate coverage of the field. While research in gold nanoparticle and magnetic nanoparticle remains the two most prominent knowledge domains in the NDDT field, research related to clinical and therapeutic applications has experienced a considerable growth. In particular, clinical and therapeutic developments in NDDT have demonstrated profound connections with the mesoporous silica nanoparticle research and microcrystal research. A rapid adaptation of mesoporous silica-based nanomaterials and rare earth fluoride nano-/microcrystal in NDDT is evident. Innovative strategies have been employed to exploit the multicomponent, chemical synthesis, surface modification, and controlled release imparting functionalized targeting capabilities. This study not only facilitated the connection of authors and research themes in the NDDT community, but also demonstrated how research interests and trends evolve over time, which greatly contributes to our understanding of the NDDT knowledge domains.

  6. Leaves of knowledge, a collectable publication for dissemination of scientific and technological topics

    International Nuclear Information System (INIS)

    Spurio, S. M.

    2013-01-01

    The Institute of Energy and Sustainable Development (IEDS) of the National Atomic Energy Commission of Argentina performs an active task of popularization of nuclear science and technology applications and its spin-off activities. The IEDS, based on this goal and the known expression of Descartes 'Science branches intertwine in the Tree of Knowledge' has been making the annual task of inviting authors, editing, publishing and often, printing the publication Leaves of Knowledge, since 2008 and without interruption. The presentation format consists in a holder folder containing collectibles sheets. Each sheet represents a leaf on the Tree Science Knowledge. The publication encourages the participation of renowned professionals invited from CNEA and other Institutions who are committing to writing just two pages of their topic specialty. As to the fifth edition currently being edited, 56 items have already been published on the following seven general topics: ENVIRONMENT - APPLICATIONS - SCIENCE - ENERGY - MATERIALS - HEALTH - SAFETY. Although it was originally aimed to the general public, now it has evolved into three distinct approaches also covering universitary and professional level. Its PDF version is available to the public through the IEDS website and it was registered under its corresponding ISBN. (author)

  7. Knowledge Management in a Competitive Scenario of an Information Technology Company

    Directory of Open Access Journals (Sweden)

    Denise de Cuffa

    2015-06-01

    Full Text Available This research aimed at proposing a knowledge management plan to increase competitiveness in an information technology company. It used qualitative methodology based on a study case, which analyzed the context of internal and external environments in which Intelitech Company operates. The data collection was divided into three steps: (1 application of a questionnaire to the manager and Intelitech employees, which was composed of knowledge management practices (KMPs, aiming at obtaining previous practices from the company and therefore internal critical variables; (2 application of Rojo’s (2005 scenario simulation model in order to identify external critical variables; and (3 formulation of a proposal for KMPs improvements according to simulated scenarios and the internal and external critical variables previously identified. So, this research resulted in the development of an action plan for two scenarios: (C1 case scenario to expansion of the market, therefore the company could hire new employees and expand its physical structure o, enhance IT tools and ask for manager's flexibility towards a new culture; and (C2 also to observe an unfavorable scenario of restricted market, it would be necessary to build customers loyal order to use IT tools, as well as interact and communicate with them. Thus, it was concluded and confirmed the hypothesis that knowledge management can enhance competitiveness of an IT company.

  8. Using Knowledge-Based Systems to Support Learning of Organizational Knowledge: A Case Study

    Science.gov (United States)

    Cooper, Lynne P.; Nash, Rebecca L.; Phan, Tu-Anh T.; Bailey, Teresa R.

    2003-01-01

    This paper describes the deployment of a knowledge system to support learning of organizational knowledge at the Jet Propulsion Laboratory (JPL), a US national research laboratory whose mission is planetary exploration and to 'do what no one has done before.' Data collected over 19 weeks of operation were used to assess system performance with respect to design considerations, participation, effectiveness of communication mechanisms, and individual-based learning. These results are discussed in the context of organizational learning research and implications for practice.

  9. Knowledge-based interpretation of cranial MR images

    International Nuclear Information System (INIS)

    Kuhn, M.H.; Menhardt, W.; Schmidt, K.H.

    1987-01-01

    A computerized system is described that can be used to evaluate an MR tomogram automatically to support clinical identification of anatomic and pathologic structures and to aid in planning MR measurements. Knowledge from three domains is used for the interpretation of an MR image: nosologic knowledge, knowledge of MR imaging parameters, and anatomic and morphologic knowledge. Nosologic information is used to generate hypotheses about possible pathologies and their locations, based on the signs and symptoms of the patient. With this information, a sequence of interpretation modules, each able to detect substructures in already detected structures with the aid of techniques from image processing, pattern recognition, and artificial intelligence, is generated and executed

  10. The drive to innovation: The privileging of science and technology knowledge production in Canada

    Science.gov (United States)

    Cauchi, Laura

    This dissertation project explored the privileging of knowledge production in science and technology as a Canadian national economic, political and social strategy. The project incorporated the relationship between nation-state knowledge production and how that knowledge is then systematically evaluated, prioritized and validated by systems of health technology assessment (HTA). The entry point into the analysis and this dissertation project was the Scientific Research and Experimental Design (SR&ED) federal tax incentive program as the cornerstone of science and technology knowledge production in Canada. The method of inquiry and analysis examined the submission documents submitted by key stakeholders across the country, representing public, private and academic standpoints, during the public consultation process conducted from 2007 to 2008 and how each of these standpoints is hooked into the public policy interests and institutional structures that produce knowledge in science and technology. Key public meetings, including the public information sessions facilitated by the Canada Revenue Agency and private industry conferences, provided context and guidance regarding the current pervasive public and policy interests that direct and drive the policy debates. Finally, the "Innovation Canada: A Call to Action Review of Federal Support to Research and Development: Expert Panel Report," commonly referred to as "The Jenkins Report" (Jenkins et al., 2011), was critically evaluated as the expected predictor of future public policy changes associated with the SR&ED program and the future implications for the production of knowledge in science and technology. The method of inquiry and analytical lens was a materialist approach that drew on the inspiring frameworks of such scholars as Dorothy Smith, Michel Foucault, Kaushik Sunder Rajan, Melinda Cooper, and, Gilles Deleuze. Ultimately, I strove to illuminate the normalizing force and power of knowledge production in science

  11. An Ontology-Based Knowledge Modelling for a Sustainability Assessment Domain

    Directory of Open Access Journals (Sweden)

    Agnieszka Konys

    2018-01-01

    Full Text Available Sustainability assessment has received more and more attention from researchers and it offers a large number of opportunities to measure and evaluate the level of its accomplishment. However, proper selection of a particular sustainability assessment approach, reflecting problem properties and the evaluator’s preferences, is a complex and important issue. Due to an existing number of different approaches dedicated to assessing, supporting, or measuring the level of sustainability and their structure oriented on the particular domain usage, problems with accurate matching frequently occur. On the other hand, the efficiency of sustainability assessment depends on the available knowledge of the ongoing capabilities. Additionally, actual research trends confirm that knowledge engineering gives a method to handle domain knowledge practically and effectively. Unfortunately, literature studies confirm that there is a lack of knowledge systematization in the sustainability assessment domain, however. The practical application of knowledge-based mechanisms may cover this gap. In this paper, we provide formal, practical and technological guidance to a knowledge management-based approach to sustainability assessment. We propose ontology as a form of knowledge conceptualization and using knowledge engineering, we make gathered knowledge publicly available and reusable, especially in terms of interoperability of collected knowledge.

  12. Semantics-based plausible reasoning to extend the knowledge coverage of medical knowledge bases for improved clinical decision support

    OpenAIRE

    Mohammadhassanzadeh, Hossein; Van Woensel, William; Abidi, Samina Raza; Abidi, Syed Sibte Raza

    2017-01-01

    Background Capturing complete medical knowledge is challenging-often due to incomplete patient Electronic Health Records (EHR), but also because of valuable, tacit medical knowledge hidden away in physicians? experiences. To extend the coverage of incomplete medical knowledge-based systems beyond their deductive closure, and thus enhance their decision-support capabilities, we argue that innovative, multi-strategy reasoning approaches should be applied. In particular, plausible reasoning mech...

  13. [Narrative-based medicine and clinical knowledge].

    Science.gov (United States)

    Saito, Seiji

    2006-01-01

    Narrative Based Medicine (NBM) can be defined as follows; a) It views the patient's illness as an unfolding story within the wider story of the patient's life and life-world; b) It acknowledges the patient as the narrator of the story and the subject of the tale; c) It recognizes that all medical theories, hypothesis and pathophysiologies as socially constructed narratives and accepts the coexistence of multiple different narratives; d) It regards the emergence of new stories from dialogue and discourse between patients and healthcare professionals as part of the treatment. Because psychiatry is the only area of specialist medicine where talking and listening are explicitly understood to be therapeutic, NBM can be adopted an effective perspective and method in psychiatry.

  14. Virtual maintenance technology for reactor system based on PPR technology

    International Nuclear Information System (INIS)

    Wu Yaxiang; Ma Baiyong

    2009-01-01

    Based on the Product, Process and Resources (PPR) technology, the establishing technology of virtual maintenance environment for the reactor system and the process structure tree for virtual maintenance is studied, and the flow for the maintainability design and simulation for reactor system is put forward. Based on the subsection simulation of maintenance process and layered design of maintenance actions, the leveled structure of the reactor system virtual maintenance task is studied. The relation for the data of product, process and resource is described by Plan Evaluation and Review Technology (PERT) diagram to define the maintenance operation. (authors)

  15. Formalization and Interaction: Toward a Comprehensive History of Technology-Related Knowledge in Early Modern Europe.

    Science.gov (United States)

    Popplow, Marcus

    2015-12-01

    Recent critical approaches to what has conventionally been described as "scientific" and "technical" knowledge in early modern Europe have provided a wealth of new insights. So far, the various analytical concepts suggested by these studies have not yet been comprehensively discussed. The present essay argues that such comprehensive approaches might prove of special value for long-term and cross-cultural reflections on technology-related knowledge. As heuristic tools, the notions of "formalization" and "interaction" are proposed as part of alternative narratives to those highlighting the emergence of "science" as the most relevant development for technology-related knowledge in early modern Europe.

  16. Developing technological pedagogical content knowledge in pre-service mathematics teachers through collaborative design

    NARCIS (Netherlands)

    Agyei, D.D.; Voogt, Joke

    2012-01-01

    Although many studies have shown the need to pay attention to teachers' preparation for the integration of technology in classroom practice, most teachers in Ghana have not had any preparation that develops their technological pedagogical content knowledge (TPCK).This paper presents a case study of

  17. Intrapersonal Factors Affecting Technological Pedagogical Content Knowledge of Agricultural Education Teachers

    Science.gov (United States)

    Stewart, Jessica; Antonenko, Pavlo D.; Robinson, J. Shane; Mwavita, Mwarumba

    2013-01-01

    The focus of this exploratory study was to examine levels of technology integration, self-efficacy, and Technological Pedagogical Content Knowledge (TPACK) in preservice and inservice agricultural education teachers in Oklahoma. The findings of this study suggest that intrapersonal factors, such as self-efficacy, outcome expectations, and…

  18. Proceedings: international conference on transfer of forest science knowledge and technology.

    Science.gov (United States)

    Cynthia Miner; Ruth Jacobs; Dennis Dykstra; Becky Bittner

    2007-01-01

    This proceedings compiles papers presented by extensionists, natural resource specialists, scientists, technology transfer specialists, and others at an international conference that examined knowledge and technology transfer theories, methods, and case studies. Theory topics included adult education, applied science, extension, diffusion of innovations, social...

  19. Teacher design knowledge and beliefs for technology enhanced learning materials in early literacy: Four portraits

    NARCIS (Netherlands)

    Boschman, Ferry; McKenney, Susan; Pieters, Jules; Voogt, Joke

    2016-01-01

    Teacher engagement in the design of technology-rich learning material is beneficial to teacher learning and may create a sense of ownership, both of which are conducive to bringing about innovation with technology. During collaborative design, teachers draw on various types of knowledge and

  20. Teacher design knowledge and beliefs for technology enhanced learning materials in early literacy: Four portraits

    NARCIS (Netherlands)

    Boschman, F.; McKenney, S.; Pieters, J.M.; Voogt, J.

    2015-01-01

    Teacher engagement in the design of technology-rich learning material is beneficial to teacher learning and may create a sense of ownership, both of which are conducive to bringing about innovation with technology. During collaborative design, teachers draw on various types of knowledge and beliefs:

  1. Domain-Specific Aspects of Technological Pedagogical Content Knowledge: Music Education and the Importance of Affect

    Science.gov (United States)

    Macrides, Elena; Angeli, Charoula

    2018-01-01

    The present study addresses the lack of a theoretical framework for the integration of technology in music teaching and learning, and explores, within the framework of Technological Pedagogical Content Knowledge (TPACK), the importance of affect in the instructional design of music lessons. The purpose of this study is twofold: (a) to extend the…

  2. Ambulatory orthopaedic surgery patients' knowledge with internet-based education.

    Science.gov (United States)

    Heikkinen, Katja; Leino-Kilpi, H; Salanterä, S

    2012-01-01

    There is a growing need for patient education and an evaluation of its outcomes. The aim of this study was to compare ambulatory orthopaedic surgery patients' knowledge with Internet-based education and face-to-face education with a nurse. The following hypothesis was proposed: Internet-based patient education (experiment) is as effective as face-to-face education with a nurse (control) in increasing patients' level of knowledge and sufficiency of knowledge. In addition, the correlations of demographic variables were tested. The patients were randomized to either an experiment group (n = 72) or a control group (n = 75). Empirical data were collected with two instruments. Patients in both groups showed improvement in their knowledge during their care. Patients in the experiment group improved their knowledge level significantly more in total than those patients in the control group. There were no differences in patients' sufficiency of knowledge between the groups. Knowledge was correlated especially with patients' age, gender and earlier ambulatory surgeries. As a conclusion, positive results concerning patients' knowledge could be achieved with the Internet-based education. The Internet is a viable method in ambulatory care.

  3. Integrating ICT in Agriculture for Knowledge-Based Economy

    African Journals Online (AJOL)

    agriculture –based livelihoods, demands the integration of ICT knowledge with agriculture. .... (CGIAR) shows the vital role of Agricultural development in Rwanda's ... Network, Rwanda National Backbone Project, Regional Communication.

  4. Knowledge-Base Application to Ground Moving Target Detection

    National Research Council Canada - National Science Library

    Adve, R

    2001-01-01

    This report summarizes a multi-year in-house effort to apply knowledge-base control techniques and advanced Space-Time Adaptive Processing algorithms to improve detection performance and false alarm...

  5. Enhancing acronym/abbreviation knowledge bases with semantic information.

    Science.gov (United States)

    Torii, Manabu; Liu, Hongfang

    2007-10-11

    In the biomedical domain, a terminology knowledge base that associates acronyms/abbreviations (denoted as SFs) with the definitions (denoted as LFs) is highly needed. For the construction such terminology knowledge base, we investigate the feasibility to build a system automatically assigning semantic categories to LFs extracted from text. Given a collection of pairs (SF,LF) derived from text, we i) assess the coverage of LFs and pairs (SF,LF) in the UMLS and justify the need of a semantic category assignment system; and ii) automatically derive name phrases annotated with semantic category and construct a system using machine learning. Utilizing ADAM, an existing collection of (SF,LF) pairs extracted from MEDLINE, our system achieved an f-measure of 87% when assigning eight UMLS-based semantic groups to LFs. The system has been incorporated into a web interface which integrates SF knowledge from multiple SF knowledge bases. Web site: http://gauss.dbb.georgetown.edu/liblab/SFThesurus.

  6. Knowledge Management for Large Scale Condition Based Maintenance

    Data.gov (United States)

    National Aeronautics and Space Administration — This presentation will review the use of knowledge management in the development and support of Condition Based Maintenance (CBM) systems for complex systems with...

  7. Community Based Health Insurance Knowledge and Willingness to ...

    African Journals Online (AJOL)

    Community Based Health Insurance Knowledge and Willingness to Pay; A Survey of a Rural Community in ... Journal Home > Vol 6, No 1 (2012) > ... and is the most appropriate insurance model for rural areas where incomes are unstable.

  8. A knowledge management-based intranet: asset or EBM liability?

    Science.gov (United States)

    Mimnagh, Christopher

    2005-01-01

    This paper summarises the presentation given at the British Computer Society Primary Health Care Specialist Group annual conference 2004. It outlines the four years of experience gained in implementing a knowledge management-based intranet across a local health community. Consideration is given to definitions of knowledge management and evidence-based medicine. The paper outlines the potential impacts and actual results over the four-year period, with reference to the wider issues involved.

  9. A relational data-knowledge base system and its potential in developing a distributed data-knowledge system

    Science.gov (United States)

    Rahimian, Eric N.; Graves, Sara J.

    1988-01-01

    A new approach used in constructing a rational data knowledge base system is described. The relational database is well suited for distribution due to its property of allowing data fragmentation and fragmentation transparency. An example is formulated of a simple relational data knowledge base which may be generalized for use in developing a relational distributed data knowledge base system. The efficiency and ease of application of such a data knowledge base management system is briefly discussed. Also discussed are the potentials of the developed model for sharing the data knowledge base as well as the possible areas of difficulty in implementing the relational data knowledge base management system.

  10. D and D knowledge management information tool - a web based system developed to share D and D knowledge worldwide

    Energy Technology Data Exchange (ETDEWEB)

    Lagos, L.; Upadhyay, H.; Shoffner, P. [Applied Research Center, Florida International University, 10555 W. Flagler Street,EC2100, Miami, FL (United States)

    2013-07-01

    to their problem areas by using the vast resources and knowledge base available throughout the global D and D community. The D and D KM-IT offers a mechanism to the global D and D community for searching relevant D and D information and is focused on providing a single point of access into the collective knowledge base of the D and D community within and outside of the DOE. Collecting information from subject matter specialists, it builds a knowledge repository for future reference archiving Lessons Learned, Best Practices, ALARA reports, and other relevant documents and maintains a secured collaboration platform for the global D and D community to share knowledge. With the dynamic nature and evolution of the D and D knowledge base due to multiple factors such as changes in the workforce, new technologies and methodologies, economics, and regulations, the D and D KM-IT is being developed in a phased and modular fashion. (authors)

  11. D and D knowledge management information tool - a web based system developed to share D and D knowledge worldwide

    International Nuclear Information System (INIS)

    Lagos, L.; Upadhyay, H.; Shoffner, P.

    2013-01-01

    to their problem areas by using the vast resources and knowledge base available throughout the global D and D community. The D and D KM-IT offers a mechanism to the global D and D community for searching relevant D and D information and is focused on providing a single point of access into the collective knowledge base of the D and D community within and outside of the DOE. Collecting information from subject matter specialists, it builds a knowledge repository for future reference archiving Lessons Learned, Best Practices, ALARA reports, and other relevant documents and maintains a secured collaboration platform for the global D and D community to share knowledge. With the dynamic nature and evolution of the D and D knowledge base due to multiple factors such as changes in the workforce, new technologies and methodologies, economics, and regulations, the D and D KM-IT is being developed in a phased and modular fashion. (authors)

  12. Nonlinear Knowledge in Kernel-Based Multiple Criteria Programming Classifier

    Science.gov (United States)

    Zhang, Dongling; Tian, Yingjie; Shi, Yong

    Kernel-based Multiple Criteria Linear Programming (KMCLP) model is used as classification methods, which can learn from training examples. Whereas, in traditional machine learning area, data sets are classified only by prior knowledge. Some works combine the above two classification principle to overcome the defaults of each approach. In this paper, we propose a model to incorporate the nonlinear knowledge into KMCLP in order to solve the problem when input consists of not only training example, but also nonlinear prior knowledge. In dealing with real world case breast cancer diagnosis, the model shows its better performance than the model solely based on training data.

  13. Technology transfer and knowledge management in cooperation networks: the Airzone case

    International Nuclear Information System (INIS)

    Benavides Velasco, C. A.; Quintana Garcia, C.

    2007-01-01

    This paper highlights the importance of cooperation networks between the public system of R and D and industry to promote technology transfer, knowledge management, and the consolidation and growth of new technology firms. Through the case of Air zone,his paper shows the significance of collaboration agreements between University and industry to enhance technology transfer and the success of entrepreneurial projects. (Author) 28 refs

  14. The Need for Knowledge Modification in Technology Change:

    DEFF Research Database (Denmark)

    Madsen, Erik Skov; Mikkelsen, Lars Lindegaard

    2018-01-01

    in the relocation of manufacturing facilities. Two studies investigate operation and automation of oil and gas production in the North Sea. The case study method involves semi-structured interviews, surveys, an analysis of historical production data and observations. Based on the findings from the field studies...

  15. Information and technology are not enough: we need also knowledge and science.

    Directory of Open Access Journals (Sweden)

    Ferdinando Boero

    2011-09-01

    Full Text Available EnThe era of Information and Technology has changed our life, allowing those who can access an internet connection to consult an almost unlimited number of sites covering almost all topics. It is difficult, however, to distinguish reliable information from unreliable one. The data posted in the web might be very precise while lacking accuracy. It is very important that information is based on solid knowledge, like the one guaranteed by peer-reviewed scientific journals. It is argued, with some examples, that the current policy of Information availability throught the internet is not based on sufficient knowledge. More reliability is available at the sites of scientific journals, but they often require a subscription and enforce copyright restrictions, so hampering the spread of knowledge which is the basis of scientific "publication" (i.e. the delivery of the results of science to the public.ItL'era della Tecnologia dell'Informazione ha cambiato la nostra vita, permettendo a chi abbia una connessione internet di consultare un numero illimitato di siti che coprono quasi tutti gli argomenti. E' difficile, tuttavia, distinguere le informazioni attendibili da quelle inattendibili. I dati pubblicati nella rete possono essere molto precisi ma mancare completamente di accuratezza. E' molto importante che le informazioni siano basate su solide conoscenze, come quella garantita dalla revisione dei pari (peer-review utilizzata dalle riviste scientifiche. Questo lavoro suggerisce, con alcuni esempi, che la politica corrente di disponibilità di informazioni attraverso internet non è basata su sufficiente conoscenza. Una maggiore attendibilità è disponibile sui siti delle riviste scientifiche, ma essi spesso richiedono un abbonamento e impongono restrizioni basate sul copyright, impedendo così la diffusione delle conoscenze che è alla base delle "pubblicazioni" scientifiche (cioè della disponibilità pubblica dei risultati della ricerca scientifica.

  16. Information technologies and the sharing of disaster knowledge: the critical role of professional culture.

    Science.gov (United States)

    Marincioni, Fausto

    2007-12-01

    A comparative survey of a diverse sample of 96 US and Italian emergency management agencies shows that the diffusion of new information technologies (IT) has transformed disaster communications. Although these technologies permit access to and the dissemination of massive amounts of disaster information with unprecedented speed and efficiency, barriers rooted in the various professional cultures still hinder the sharing of disaster knowledge. To be effective the available IT must be attuned to the unique settings and professional cultures of the local emergency management communities. Findings show that available technology, context, professional culture and interaction are key factors that affect the knowledge transfer process. Cultural filters appear to influence emergency managers' perceptions of their own professional roles, their vision of the applicability of technology to social issues, and their perspective on the transferability of disaster knowledge. Four cultural approaches to the application of IT to disaster communications are defined: technocentric; geographic,; anthropocentric; and ecocentric.

  17. Analyzing the dialogic turn in the communication of research-based knowledge

    DEFF Research Database (Denmark)

    Phillips, Louise Jane

    2011-01-01

    Tensions have been identified in the shift to dialogue, whereby researchers produce and communicate research-based knowledge in interaction with different social actors. This paper draws on three perspectives on those tensions  - science and technology studies analyses of public engagement, action...... where the collaborating actors ­(university researchers and practitioners) co-produce knowledge through communication processes in which different expert-identities and knowledge forms are negotiated. The analysis explores the balancing-act between imposing control on the research process and opening up...

  18. From Data to Knowledge: GEOSS experience and the GEOSS Knowledge Base contribution to the GCI

    Science.gov (United States)

    Santoro, M.; Nativi, S.; Mazzetti, P., Sr.; Plag, H. P.

    2016-12-01

    According to systems theory, data is raw, it simply exists and has no significance beyond its existence; while, information is data that has been given meaning by way of relational connection. The appropriate collection of information, such that it contributes to understanding, is a process of knowledge creation.The Global Earth Observation System of Systems (GEOSS) developed by the Group on Earth Observations (GEO) is a set of coordinated, independent Earth observation, information and processing systems that interact and provide access to diverse information for a broad range of users in both public and private sectors. GEOSS links these systems to strengthen the monitoring of the state of the Earth. In the past ten years, the development of GEOSS has taught several lessons dealing with the need to move from (open) data to information and knowledge sharing. Advanced user-focused services require to move from a data-driven framework to a knowledge sharing platform. Such a platform needs to manage information and knowledge, in addition to datasets linked to them. For this scope, GEO has launched a specific task called "GEOSS Knowledge Base", which deals with resources, like user requirements, Sustainable Development Goals (SDGs), observation and processing ontologies, publications, guidelines, best practices, business processes/algorithms, definition of advanced concepts like Essential Variables (EVs), indicators, strategic goals, etc. In turn, information and knowledge (e.g. guidelines, best practices, user requirements, business processes, algorithms, etc.) can be used to generate additional information and knowledge from shared datasets. To fully utilize and leverage the GEOSS Knowledge Base, the current GEOSS Common Infrastructure (GCI) model will be extended and advanced to consider important concepts and implementation artifacts, such as data processing services and environmental/economic models as well as EVs, Primary Indicators, and SDGs. The new GCI model

  19. Athletic Trainers’ Knowledge of Legal Practice within Information Technology and Social Media

    Directory of Open Access Journals (Sweden)

    Elizabeth R. Neil

    2017-12-01

    Full Text Available Purpose: As healthcare and technology continue to connect in daily practice, athletic trainers (ATs must be knowledgeable of the governing acts for ethical and legal clinical practice. This is vital to ensure ethical and legal practice as a clinician and protection of confidential protected health information (PHI. The objective of this study was to assess certified athletic trainers’ knowledge of regulations within technology and social media (SoMe. Methods: Certified ATs were recruited from the National Athletic Trainers’ Association membership database. Respondents completed an instrument of 28 questions, including 16 participant demographics, clinical site demographics, SoMe usage and general questions, and a 12-item knowledge assessment tool on a web-based survey platform. Validity of the instrument was determined through a Delphi panel of experts in athletic training, healthcare lawyers and an information technologist. We analyzed data using descriptive statistics. Results: Respondents reported a Master’s degree as their highest earned (n=106, 72.6% with 33.6% of those degrees being at the professional level (n=49. Respondents predominately worked in the public secondary school setting (n=43, 29.5% and worked 8-9 hours per day (n=78, 53.4%. Respondents self-reported an average of five active SoMe accounts with Facebook® (n=120,, 81.6%, LinkedIn® (n=75, 51%, Instagram® (n=70, 47.6%, Twitter® (n=70, 47.6%, Pinterest® (n=64, 43.5%, and Snapchat® (n=64, 43.5% being the most common sites. Within their athletic training clinic, respondents predominately reported (n=76, 51.7% that all their computers had a virtual private network, and had a SoMe policy that was enforced to some extent (n=63, 42.9%. Respondents (n=136, 92.5% stated that they have not reported someone for a breach of HIPAA, and have not been reported themselves (n=146, 99.3%; however, respondents (n=16, 10.8% indicated they had one or more full faced photos of patients

  20. The Latent Structure of Secure Base Script Knowledge

    Science.gov (United States)

    Waters, Theodore E. A.; Fraley, R. Chris; Groh, Ashley M.; Steele, Ryan D.; Vaughn, Brian E.; Bost, Kelly K.; Veríssimo, Manuela; Coppola, Gabrielle; Roisman, Glenn I.

    2015-01-01

    There is increasing evidence that attachment representations abstracted from childhood experiences with primary caregivers are organized as a cognitive script describing secure base use and support (i.e., the "secure base script"). To date, however, the latent structure of secure base script knowledge has gone unexamined--this despite…