WorldWideScience

Sample records for technology high field

  1. High magnetic fields science and technology

    CERN Document Server

    Miura, Noboru

    2003-01-01

    This three-volume book provides a comprehensive review of experiments in very strong magnetic fields that can only be generated with very special magnets. The first volume is entirely devoted to the technology of laboratory magnets: permanent, superconducting, high-power water-cooled and hybrid; pulsed magnets, both nondestructive and destructive (megagauss fields). Volumes 2 and 3 contain reviews of the different areas of research where strong magnetic fields are an essential research tool. These volumes deal primarily with solid-state physics; other research areas covered are biological syst

  2. High magnetic field ohmically decoupled non-contact technology

    Science.gov (United States)

    Wilgen, John [Oak Ridge, TN; Kisner, Roger [Knoxville, TN; Ludtka, Gerard [Oak Ridge, TN; Ludtka, Gail [Oak Ridge, TN; Jaramillo, Roger [Knoxville, TN

    2009-05-19

    Methods and apparatus are described for high magnetic field ohmically decoupled non-contact treatment of conductive materials in a high magnetic field. A method includes applying a high magnetic field to at least a portion of a conductive material; and applying an inductive magnetic field to at least a fraction of the conductive material to induce a surface current within the fraction of the conductive material, the surface current generating a substantially bi-directional force that defines a vibration. The high magnetic field and the inductive magnetic field are substantially confocal, the fraction of the conductive material is located within the portion of the conductive material and ohmic heating from the surface current is ohmically decoupled from the vibration. An apparatus includes a high magnetic field coil defining an applied high magnetic field; an inductive magnetic field coil coupled to the high magnetic field coil, the inductive magnetic field coil defining an applied inductive magnetic field; and a processing zone located within both the applied high magnetic field and the applied inductive magnetic field. The high magnetic field and the inductive magnetic field are substantially confocal, and ohmic heating of a conductive material located in the processing zone is ohmically decoupled from a vibration of the conductive material.

  3. Magnet Science and Technology for Basic Research at the High Field Laboratory for Superconducting Materials

    Institute of Scientific and Technical Information of China (English)

    渡辺和雄

    2007-01-01

    Since the first practical cryocooled superconducting magnet using a GM-cryocooler and high temperature superconducting current leads has been demonstrated successfully at the High Field Laboratory for Superconducting Materials (HFLSM), various kinds of cryocooled superconducting magnets in fields up to 15 T have been used to provide access for new research areas in fields of magneto-science. Recently, the HFLSM has succeeded in demonstrating a cryocooed 18 T high temperature superconducting magnet and a high field cryocooled 27.5 T hybrid magnet. Cryocooled magnet technology and basic research using high field magnets at the HFLSM are introduced.

  4. Models of optimal technology for removing oil by secondary methods of developing highly viscous oil fields

    Energy Technology Data Exchange (ETDEWEB)

    Jewulski, J.

    1982-01-01

    This paper presents research on developing several methods of optimal technology for removing oil in highly viscous oil fields from the following wells: Lubno-3, Kharklova-Gvaretstvo 154 and Vetzhno (heavy oil). The problem connected with preparing the displacement fluids, with special emphasis on the authors patented technology for producing micellar solutions are discussed. The studies of dislocation fluids (including modified ones) were conducted at 3 temperatures: 293, 308, and 323/sup 0/K and with and without micellar solutions. The tests were used to idetify static regressive models of oil removal from oil fields. The model is satisfactorily accurate in predicting the amount of oil yield by using various secondary methods. Practical conclusions are reached based on an analysis of the studies. These conclusions provide the basis for industrial tests to increase the effectiveness of waterflooding highly viscous oil fields. They can also be used to develop old (gased) oil fields, an advantage considering the current fuel-energy situation.

  5. Test of piezo-ceramic motor technology in ITER relevant high magnetic fields

    Energy Technology Data Exchange (ETDEWEB)

    Monti, Chiara, E-mail: chiara.monti@enea.it [Associazione EURATOM-ENEA sulla Fusione, via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Besi Vetrella, Ugo; Mugnaini, Giampiero; Neri, Carlo; Rossi, Paolo; Viola, Rosario [Associazione EURATOM-ENEA sulla Fusione, via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Dubus, Gregory; Damiani, Carlo [Fusion for Energy, c/ Josep Pla, 2 Torres Diagonal Litoral, 08019 Barcelona (Spain)

    2014-10-15

    In the framework of a Fusion for Energy (F4E) grant, a test campaign started in 2012 in order to assess the performance of the in-vessel viewing system (IVVS) probe concept and to verify its compatibility when exposed to ITER typical working conditions. ENEA laboratories went through with several tests simulating high magnetic fields, high temperature, high vacuum, gamma radiation and neutron radiation. A customized motor has been adopted to study the performances of ultrasonic piezo motors technology in high magnetic field conditions. This paper reports on the testing activity performed on the motor in a multi Tesla magnetic field. The job was carried out in a test facility of ENEA laboratories able to achieve 14 T. A maximum field of 10 T, fully compliant with ITER requirements (8 T), was applied. A specific mechanical assembly has been designed and manufactured to hold the motor in the region with high homogeneity of the field. Results obtained so far indicate that the motor is compatible with high magnetic fields, and are presented in the paper.

  6. Stress management as an enabling technology for high-field superconducting dipole magnets

    Science.gov (United States)

    Holik, Eddie Frank, III

    This dissertation examines stress management and other construction techniques as means to meet future accelerator requirement demands by planning, fabricating, and analyzing a high-field, Nb3Sn dipole. In order to enable future fundamental research and discovery in high energy accelerator physics, bending magnets must access the highest fields possible. Stress management is a novel, propitious path to attain higher fields and preserve the maximum current capacity of advanced superconductors by managing the Lorentz stress so that strain induced current degradation is mitigated. Stress management is accomplished through several innovative design features. A block-coil geometry enables an Inconel pier and beam matrix to be incorporated in the windings for Lorentz Stress support and reduced AC loss. A laminar spring between windings and mica paper surrounding each winding inhibit any stress transferral through the support structure and has been simulated with ALGORRTM. Wood's metal filled, stainless steel bladders apply isostatic, surface-conforming preload to the pier and beam support structure. Sufficient preload along with mica paper sheer release reduces magnet training by inhibiting stick-slip motion. The effectiveness of stress management is tested with high-precision capacitive stress transducers and strain gauges. In addition to stress management, there are several technologies developed to assist in the successful construction of a high-field dipole. Quench protection has been designed and simulated along with full 3D magnetic simulation with OPERARTM. Rutherford cable was constructed, and cable thermal expansion data was analysed after heat treatment. Pre-impregnation analysis techniques were developed due to elemental tin leakage in varying quantities during heat treatment from each coil. Robust splicing techniques were developed with measured resistivites consistent with nO joints. Stress management has not been incorporated by any other high field dipole

  7. A High-Throughput, Field-Based Phenotyping Technology for Tall Biomass Crops.

    Science.gov (United States)

    Salas Fernandez, Maria G; Bao, Yin; Tang, Lie; Schnable, Patrick S

    2017-08-01

    Recent advances in omics technologies have not been accompanied by equally efficient, cost-effective, and accurate phenotyping methods required to dissect the genetic architecture of complex traits. Even though high-throughput phenotyping platforms have been developed for controlled environments, field-based aerial and ground technologies have only been designed and deployed for short-stature crops. Therefore, we developed and tested Phenobot 1.0, an auto-steered and self-propelled field-based high-throughput phenotyping platform for tall dense canopy crops, such as sorghum (Sorghum bicolor). Phenobot 1.0 was equipped with laterally positioned and vertically stacked stereo RGB cameras. Images collected from 307 diverse sorghum lines were reconstructed in 3D for feature extraction. User interfaces were developed, and multiple algorithms were evaluated for their accuracy in estimating plant height and stem diameter. Tested feature extraction methods included the following: (1) User-interactive Individual Plant Height Extraction (UsIn-PHe) based on dense stereo three-dimensional reconstruction; (2) Automatic Hedge-based Plant Height Extraction (Auto-PHe) based on dense stereo 3D reconstruction; (3) User-interactive Dense Stereo Matching Stem Diameter Extraction; and (4) User-interactive Image Patch Stereo Matching Stem Diameter Extraction (IPaS-Di). Comparative genome-wide association analysis and ground-truth validation demonstrated that both UsIn-PHe and Auto-PHe were accurate methods to estimate plant height, while Auto-PHe had the additional advantage of being a completely automated process. For stem diameter, IPaS-Di generated the most accurate estimates of this biomass-related architectural trait. In summary, our technology was proven robust to obtain ground-based high-throughput plant architecture parameters of sorghum, a tall and densely planted crop species. © 2017 American Society of Plant Biologists. All Rights Reserved.

  8. A High-Throughput, Field-Based Phenotyping Technology for Tall Biomass Crops1[OPEN

    Science.gov (United States)

    2017-01-01

    Recent advances in omics technologies have not been accompanied by equally efficient, cost-effective, and accurate phenotyping methods required to dissect the genetic architecture of complex traits. Even though high-throughput phenotyping platforms have been developed for controlled environments, field-based aerial and ground technologies have only been designed and deployed for short-stature crops. Therefore, we developed and tested Phenobot 1.0, an auto-steered and self-propelled field-based high-throughput phenotyping platform for tall dense canopy crops, such as sorghum (Sorghum bicolor). Phenobot 1.0 was equipped with laterally positioned and vertically stacked stereo RGB cameras. Images collected from 307 diverse sorghum lines were reconstructed in 3D for feature extraction. User interfaces were developed, and multiple algorithms were evaluated for their accuracy in estimating plant height and stem diameter. Tested feature extraction methods included the following: (1) User-interactive Individual Plant Height Extraction (UsIn-PHe) based on dense stereo three-dimensional reconstruction; (2) Automatic Hedge-based Plant Height Extraction (Auto-PHe) based on dense stereo 3D reconstruction; (3) User-interactive Dense Stereo Matching Stem Diameter Extraction; and (4) User-interactive Image Patch Stereo Matching Stem Diameter Extraction (IPaS-Di). Comparative genome-wide association analysis and ground-truth validation demonstrated that both UsIn-PHe and Auto-PHe were accurate methods to estimate plant height, while Auto-PHe had the additional advantage of being a completely automated process. For stem diameter, IPaS-Di generated the most accurate estimates of this biomass-related architectural trait. In summary, our technology was proven robust to obtain ground-based high-throughput plant architecture parameters of sorghum, a tall and densely planted crop species. PMID:28620124

  9. Study on technology of high-frequency pulsed magnetic field strength measurement.

    Science.gov (United States)

    Chen, Yi-Mei; Liu, Zhi-Peng; Yin, Tao

    2012-01-01

    High-frequency transient weak magnetic field is always involved in researches about biomedical engineering field while common magnetic-field sensors cannot work properly at frequencies as high as MHz. To measure the value of MHz-level weak pulsed magnetic-field strength accurately, this paper designs a measurement and calibration method for pulsed magnetic-field. In this paper, a device made of Nonferromagnetic material was independently designed and applied to pulsed magnetic field measurement. It held an accurately relative position between the magnetic field generating coil and the detecting coil. By applying a sinusoidal pulse to the generator, collecting the induced electromotive force of the detector, the final magnetic field strength was worked out through algorithms written in Matlab according to Faraday's Law. Experiments were carried out for measurement and calibration. Experiments showed that, under good stability and consistency, accurate measurement of magnetic-field strength of a sinepulse magnetic-field can be achieved, with frequency at 0.5, 1, 1.5 MHz and strength level at micro-Tesla. Calibration results carried out a measuring relative error about 2.5%.

  10. Flexible, High Performance Microlens Array Technologies for Integral Field Spectrographs Project

    Data.gov (United States)

    National Aeronautics and Space Administration — For the purposes of advancing integral field spectrograph (IFS) microlens capabilities, a new class of high-quality optics-grade nanostructured organic-inorganic...

  11. Consumer perception of the use of high-pressure processing and pulsed electric field technologies in food production

    DEFF Research Database (Denmark)

    Nielsen, Henriette Boel; Sonne, Anne-Mette; Grunert, Klaus G.

    2009-01-01

    . Participants were introduced to the HPP and PEF technologies and then to the effect of the two new technologies on two specific product categories: juice and baby food. The transcribed data was content analysed and the coded data was transformed into diagrams using UCINET 5 and NETDRAW. The results show......The success of new food processing technologies is highly dependent on consumers' acceptance. The purpose of this paper is to study consumers' perceptions of two new processing technologies and food products produced by means of these novel technologies. To accomplish this, a qualitative study...... on consumer attitudes towards high-pressure processing (HPP) and pulsed electric field (PEF) processing of food was carried out. In all 97 adults between 20 and 71 years of age participated in 12 focus groups conducted in Slovenia, Hungary, Serbia, Slovakia, Norway and Denmark using a common guideline...

  12. Technological Aspects: High Voltage

    CERN Document Server

    Faircloth, D C

    2013-01-01

    This paper covers the theory and technological aspects of high-voltage design for ion sources. Electric field strengths are critical to understanding high-voltage breakdown. The equations governing electric fields and the techniques to solve them are discussed. The fundamental physics of high-voltage breakdown and electrical discharges are outlined. Different types of electrical discharges are catalogued and their behaviour in environments ranging from air to vacuum are detailed. The importance of surfaces is discussed. The principles of designing electrodes and insulators are introduced. The use of high-voltage platforms and their relation to system design are discussed. The use of commercially available high-voltage technology such as connectors, feedthroughs and cables are considered. Different power supply technologies and their procurement are briefly outlined. High-voltage safety, electric shocks and system design rules are covered.

  13. Characterisation of practical high temperature superconductors in pulsed magnetic fields and development of associated technology

    CERN Document Server

    Saleh, P M

    2000-01-01

    including a innovative design of a 100ms pulsed magnet solenoid. Critical current measurements on state of the art practical high temperature superconductors are presented. Bi sub 2 Sr sub 2 CaCu sub 2 O silver-alloy matrix powder-in-tube and silver-alloy substrate dip-coated tapes, formed into various geometries, have been tested in pulsed magnetic fields of various pulse lengths. These measurements have been compared to tests performed in continuous magnetic fields. A distinct discrepancy between pulsed and continuous measurements has been observed in these silver-alloy, high temperature superconductor composites. The critical current measured in pulsed fields is depressed compared to those measured in continuous fields. Evidence is provided to strongly suggest that eddy current heating in the silver-alloy substrate/sheath of the conductor is responsible for this discrepancy. A model is presented to predict the temperature rise due to eddy current heating. This model shows good agreement with observations. ...

  14. Controlling Halo-chaos Complexity for Nuclear Power System and Managing High Technology Field

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Variability is one of most important features of complexity in the complex systems because of itssensitivities to small perturbation. Various possible competing behaviors in the systems provide greatflexibility in controlling dynamical complexity and can manage/select a desired behavior for applicationsin real world. In many high-tech fields, how to control or manage complexity is of significant andchallenge issue. Taking as a typical example, accelerator driven clean nuclear power system (ADS) is one

  15. Consumer perception of the use of high-pressure processing and pulsed electric field technologies in food production.

    Science.gov (United States)

    Nielsen, Henriette Boel; Sonne, Anne-Mette; Grunert, Klaus G; Banati, Diana; Pollák-Tóth, Annamária; Lakner, Zoltán; Olsen, Nina Veflen; Zontar, Tanja Pajk; Peterman, Marjana

    2009-02-01

    The success of new food processing technologies is highly dependent on consumers' acceptance. The purpose of this paper is to study consumers' perceptions of two new processing technologies and food products produced by means of these novel technologies. To accomplish this, a qualitative study on consumer attitudes towards high-pressure processing (HPP) and pulsed electric field (PEF) processing of food was carried out. In all 97 adults between 20 and 71 years of age participated in 12 focus groups conducted in Slovenia, Hungary, Serbia, Slovakia, Norway and Denmark using a common guideline. Participants were introduced to the HPP and PEF technologies and then to the effect of the two new technologies on two specific product categories: juice and baby food. The transcribed data was content analysed and the coded data was transformed into diagrams using UCINET 5 and NETDRAW. The results show that consumers perceived the main advantages of HPP and PEF products to be the products' naturalness, improved taste and their high nutritional value, whereas the main disadvantage was the lack of information about the PEF and HPP products. The results of the participants' evaluation of the PEF and HPP processes showed that environmental friendliness and the more natural products were seen as the main advantages, while they were concerned about body and health, the higher price of the products, the lack of information about the technologies and a general scepticism. The study also shows that North European participants were a bit more sceptical towards PEF and HPP products than the East European participants.

  16. Consumer perception of the use of high-pressure processing and pulsed electric field technologies in food production

    DEFF Research Database (Denmark)

    Nielsen, Henriette Boel; Sonne, Anne-Mette; Grunert, Klaus G.

    2009-01-01

    on consumer attitudes towards high-pressure processing (HPP) and pulsed electric field (PEF) processing of food was carried out. In all 97 adults between 20 and 71 years of age participated in 12 focus groups conducted in Slovenia, Hungary, Serbia, Slovakia, Norway and Denmark using a common guideline...... showed that environmental friendliness and the more natural products were seen as the main advantages, while they were concerned about body and health, the higher price of the products, the lack of information about the technologies and a general scepticism. The study also shows that North European...

  17. Ultra-High Field NMR and MRI—The Role of Magnet Technology to Increase Sensitivity and Specificity

    Directory of Open Access Journals (Sweden)

    Ewald Moser

    2017-08-01

    Full Text Available “History, of course, is difficult to write, if for no other reason, than that it has so many players and so many authors.” – P. J. Keating (former Australian Prime MinisterStarting with post-war developments in nuclear magnetic resonance (NMR a race for stronger and stronger magnetic fields has begun in the 1950s to overcome the inherently low sensitivity of this promising method. Further challenges were larger magnet bores to accommodate small animals and eventually humans. Initially, resistive electromagnets with small pole distances, or sample volumes, and field strengths up to 2.35 T (or 100 MHz 1H frequency were used in applications in physics, chemistry, and material science. This was followed by stronger and more stable (Nb-Ti based superconducting magnet technology typically implemented first for small-bore systems in analytical chemistry, biochemistry and structural biology, and eventually allowing larger horizontal-bore magnets with diameters large enough to fit small laboratory animals. By the end of the 1970s, first low-field resistive magnets big enough to accommodate humans were developed and superconducting whole-body systems followed. Currently, cutting-edge analytical NMR systems are available at proton frequencies up to 1 GHz (23.5 T based on Nb3Sn at 1.9 K. A new 1.2 GHz system (28 T at 1.9 K, operating in persistent mode but using a combination of low and high temperature multi-filament superconductors is to be released. Preclinical instruments range from small-bore animal systems with typically 600–800 MHz (14.1–18.8 T up to 900 MHz (21 T at 1.9 K. Human whole-body MRI systems currently operate up to 10.5 T. Hybrid combined superconducting and resistive electromagnets with even higher field strength of 45 T dc and 100 T pulsed, are available for material research, of course with smaller free bore diameters. This rather costly development toward higher and higher field strength is a consequence of the inherently low

  18. Sensing with Advanced Computing Technology: Fin Field-Effect Transistors with High-k Gate Stack on Bulk Silicon.

    Science.gov (United States)

    Rigante, Sara; Scarbolo, Paolo; Wipf, Mathias; Stoop, Ralph L; Bedner, Kristine; Buitrago, Elizabeth; Bazigos, Antonios; Bouvet, Didier; Calame, Michel; Schönenberger, Christian; Ionescu, Adrian M

    2015-05-26

    Field-effect transistors (FETs) form an established technology for sensing applications. However, recent advancements and use of high-performance multigate metal-oxide semiconductor FETs (double-gate, FinFET, trigate, gate-all-around) in computing technology, instead of bulk MOSFETs, raise new opportunities and questions about the most suitable device architectures for sensing integrated circuits. In this work, we propose pH and ion sensors exploiting FinFETs fabricated on bulk silicon by a fully CMOS compatible approach, as an alternative to the widely investigated silicon nanowires on silicon-on-insulator substrates. We also provide an analytical insight of the concept of sensitivity for the electronic integration of sensors. N-channel fully depleted FinFETs with critical dimensions on the order of 20 nm and HfO2 as a high-k gate insulator have been developed and characterized, showing excellent electrical properties, subthreshold swing, SS ∼ 70 mV/dec, and on-to-off current ratio, Ion/Ioff ∼ 10(6), at room temperature. The same FinFET architecture is validated as a highly sensitive, stable, and reproducible pH sensor. An intrinsic sensitivity close to the Nernst limit, S = 57 mV/pH, is achieved. The pH response in terms of output current reaches Sout = 60%. Long-term measurements have been performed over 4.5 days with a resulting drift in time δVth/δt = 0.10 mV/h. Finally, we show the capability to reproduce experimental data with an extended three-dimensional commercial finite element analysis simulator, in both dry and wet environments, which is useful for future advanced sensor design and optimization.

  19. A Study to Develop an Industrial-Scale, Computer-Controlled High Magnetic Field Processing (HMFP) System to Assist in Commercializing the Novel, Enabling HMFP Manufacturing Technology

    Energy Technology Data Exchange (ETDEWEB)

    Ludtka, Gail Mackiewicz- [ORNL; Chourey, Aashish [American Magnetics Inc.

    2010-08-01

    As the original magnet designer and manufacturer of ORNL s 9T, 5-inch ID bore magnet, American Magnetics Inc. (AMI) has collaborated with ORNL s Materials Processing Group s and this partnership has been instrumental in the development of our unique thermo-magnetic facilities and expertise. Consequently, AMI and ORNL have realized that the commercial implementation of the High Magnetic Field Processing (HMFP) technology will require the evolution of robust, automated superconducting (SC) magnet systems that will be cost-effective and easy to operate in an industrial environment. The goal of this project and CRADA is to significantly expedite the timeline for implementing this revolutionary and pervasive cross-cutting technology for future US produced industrial components. The successful completion of this project is anticipated to significantly assist in the timely commercialization and licensing of our HMFP intellectual property for a broad spectrum of industries; and to open up a new market for AMI. One notable outcome of this project is that the ThermoMagnetic Processing Technology WON a prestigious 2009 R&D 100 Awards. This award acknowledges and recognizes our TMP Technology as one of the top 100 innovative US technologies in 2009. By successfully establishing the design requirements for a commercial scale magnetic processing system, this project effort has accomplished a key first step in facilitating the building and demonstration of a superconducting magnetic processing coil, enabling the transition of the High Magnetic Field Processing Technology beyond a laboratory novelty into a commercially viable and industrially scalable Manufacturing Technology.

  20. A Study to Develop an Industrial-Scale, Computer-Controlled High Magnetic Field Processing (HMFP) System to Assist in Commercializing the Novel, Enabling HMFP Manufacturing Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lutdka, G. M.; Chourey, A. (American Magnetics, Inc.)

    2010-05-12

    As the original magnet designer and manufacturer of ORNL’s 9T, 5-inch ID bore magnet, American Magnetics Inc. (AMI) has collaborated with ORNL’s Materials Processing Group’s and this partnership has been instrumental in the development of our unique thermo-magnetic facilities and expertise. Consequently, AMI and ORNL have realized that the commercial implementation of the High Magnetic Field Processing (HMFP) technology will require the evolution of robust, automated superconducting (SC) magnet systems that will be cost-effective and easy to operate in an industrial environment. The goal of this project and CRADA is to significantly expedite the timeline for implementing this revolutionary and pervasive cross-cutting technology for future US produced industrial components. The successful completion of this project is anticipated to significantly assist in the timely commercialization and licensing of our HMFP intellectual property for a broad spectrum of industries; and to open up a new market for AMI. One notable outcome of this project is that the ThermoMagnetic Processing Technology WON a prestigious 2009 R&D 100 Awards. This award acknowledges and recognizes our TMP Technology as one of the top 100 innovative US technologies in 2009. By successfully establishing the design requirements for a commercial scale magnetic processing system, this project effort has accomplished a key first step in facilitating the building and demonstration of a superconducting magnetic processing coil, enabling the transition of the High Magnetic Field Processing Technology beyond a laboratory novelty into a commercially viable and industrially scalable Manufacturing Technology.

  1. New technology for scale squeeze treatments on high water cut wells on Statoil Heidrun and Norne fields

    Energy Technology Data Exchange (ETDEWEB)

    Sim, Michael; Heath, Steve; Selle, Olav M.; Haavind, Frode; Springer, Martin; Auflem, Inge H.; Clark, Graham; Strachan, Catherine; Oedegaard, Bent

    2006-03-15

    The Heidrun and Norne fields are located in the Haltenbanken area offshore Mid-Norway. The reservoir temperatures are 85 deg-88 deg C and 98 deg C respectively, and the reservoir pressure is close to hydrostatic pressure of approx. 250Bar for both fields. Seawater injection is utilised on both Heidrun and Norne to maintain reservoir support and with Ba levels averaging 80-90ppm and 200-300ppm in the Norne and Heidrun formation brines, moderate to harsh barium sulphate scale challenges have been identified. The barium sulphate scale challenge has been routinely controlled by the use of aqueous based scale squeeze treatments. However, on high water cut and low reservoir pressure wells, lifting problems have been encountered post squeeze treatments. Hybrid treatments with diesel pre-flush and over flush have been slow in returning the wells to full production post squeeze treatment. The challenge was therefore to develop a low-density scale inhibitor (less than 0.94) that will aid well re-start post squeeze treatment. This product would also need to be environmentally friendly, compatible with produced fluids and non-emulsifying, be effectively retained and released, and provide a good level of inhibition against barium sulphate scale. This paper will highlight the details of the laboratory development of the low-density scale inhibitor and, in addition, will present details of the deployment of the low density product in wells with lifting problems on Heidrun and Norne. (Author) (tk)

  2. High field superconducting magnet: Science, Technology and Applications%高场超导磁体科学技术与应用

    Institute of Scientific and Technical Information of China (English)

    王秋良

    2013-01-01

    科学技术的发展对于磁场强度质量的要求越来越高,极端强磁场条件是人类追求的永远的科学目标,它孕育着许多重大的科学发现和新技术的产生,对人类的科学和技术以及生活产生重大的影响.以磁体为核心与电力电子器件以及相关的软件等结合可以构成各种各样科学仪器和装置,广泛应用在科学研究和工业特种装备中.磁技术对于人类的科学与技术进步起到越来越重要的作用,尤其是极高磁场所带来的诸多优点,使得人类对于物质世界认识不断加深,对于生命的起源以及从事疾病的防治的研究有特别重要的意义.本文介绍磁体基本原理、磁场产生的方法与应用以及相关的发展.%Development of superconducting magnet science and technology requires a magnetic field with high strength and good quality.The pursuit of extremely high magnetic field is an eternal scientific goal forscientists and engineers.It is an exciting cutting-edge technology with full of challenges and has been essential for many significant discoveries in science and technology.Combined with power-electronic devices and related software,a whole magnet system can be built up as the key component of various types of scientific instruments and other equipment,and can be fund widespread applications in scientific research and industry.Magnet technology is currently playing a more and more important role in scientific and technological progress.Ultra-high magnetic fields help to give us much deeper understanding of the world of matter and have special significance for research into the origins of life and disease prevention.In this review article,basic magnet principles,methods of generating magnetic fields,magnetic field applications,and numerical methods for the design of magnet structures are briefly introduced and reviewed.

  3. Instructional Technology: The Research Field.

    Science.gov (United States)

    Gagne, Robert M.

    1986-01-01

    Reflects upon opportunities for research in instructional technology provided by present state of media hardware technology and educational requirements. Prospects for research in incidental learning, including learning from television, are discussed, as well as traditional learning research on intentional learning, including possibilities for…

  4. Assistive Technology and Mathematics Education: Reports from the Field

    Science.gov (United States)

    Bouck, Emily C.

    2012-01-01

    Mathematics is a critical content area and assistive technology can benefit students with high incidence disabilities in accessing and achieving in this domain. Yet, the field lacks awareness of how often teachers use assistive technology in mathematics and what types of technology they are using. This study sought to understand teachers' self…

  5. Pulsed electric field technology: Modeling of electric field and temperature distributions within continuous flow PEF treatment chamber

    OpenAIRE

    Salengke, dkk

    2012-01-01

    Innovations and technology developments in the field of food pasteurization and sterilization are continuously evolving. These include innovations in thermal processing technologies such as aseptic processing, ohmic technology, and microwave technology, as well as non-thermal processing technologies which include pulsed electric field technology and high pressure processing technology. This paper discussed the results of a study on mathematical modeling of electric field and temperature distr...

  6. ELECTRIC FIELD SENSORS BASED ON MEMS TECHNOLOGY

    Institute of Scientific and Technical Information of China (English)

    Gong Chao; Xia Shanhong; Deng Kai; Bai Qiang; Chen Shaofeng

    2005-01-01

    The design and optimization of two types of novel miniature vibrating Electric Field Sensors (EFSs) based on Micro Electro Mechanical Systems (MEMS) technology are presented.They have different structures and vibrating modes. The volume is much smaller than other types of charge-induced EFSs such as field-mills. As miniaturizing, the induced signal is reduced enormously and a high sensitive circuit is needed to detect it. Elaborately designed electrodes can increase the amplitude of the output current, making the detecting circuit simplified and improving the signal-to-noise ratio. Computer simulations for different structural parameters of the EFSs and vibrating methods have been carried out by Finite Element Method (FEM). It is proved that the new structures are realizable and the output signals are detectable.

  7. Tunneling field effect transistor technology

    CERN Document Server

    Chan, Mansun

    2016-01-01

    This book provides a single-source reference to the state-of-the art in tunneling field effect transistors (TFETs). Readers will learn the TFETs physics from advanced atomistic simulations, the TFETs fabrication process and the important roles that TFETs will play in enabling integrated circuit designs for power efficiency. · Provides comprehensive reference to tunneling field effect transistors (TFETs); · Covers all aspects of TFETs, from device process to modeling and applications; · Enables design of power-efficient integrated circuits, with low power consumption TFETs.

  8. Development of a dedicated beam forming system for material and bioscience research with high intensity, small field electron beam of LILLYPUT 3 accelerator at Wroclaw Technology Park

    CERN Document Server

    Adrich, Przemysław; Wilk, Piotr; Chorowski, Maciej; Poliński, Jarosław; Bogdan, Piotr

    2016-01-01

    The primary use of the LILLYPUT 3 accelerator at the Nondestructive Testing Laboratory at Wroclaw Technology Park is X-ray radiography for nondestructive testing, including R&D of novel techniques for industrial and medical imaging. The scope of possible applications could be greatly extended by providing a system for irradiation with electron beam. The purpose of this work was to design such a system, especially for high dose rate, small field irradiations under cryogenic conditions for material and bioscience research. In this work, two possible solutions, based either on beam scanning or scattering and collimation, were studied and compared. It was found that under existing conditions efficiency of both systems would be comparable. The latter one was adopted due to its simplicity and much lower cost. The system design was optimized by means of detailed Monte Carlo modeling. The system is being currently fabricated at National Centre for Nuclear Research in \\'Swierk.

  9. Applications of GPS technologies to field sports.

    Science.gov (United States)

    Aughey, Robert J

    2011-09-01

    Global positioning system (GPS) technology was made possible after the invention of the atomic clock. The first suggestion that GPS could be used to assess the physical activity of humans followed some 40 y later. There was a rapid uptake of GPS technology, with the literature concentrating on validation studies and the measurement of steady-state movement. The first attempts were made to validate GPS for field sport applications in 2006. While GPS has been validated for applications for team sports, some doubts continue to exist on the appropriateness of GPS for measuring short high-velocity movements. Thus, GPS has been applied extensively in Australian football, cricket, hockey, rugby union and league, and soccer. There is extensive information on the activity profile of athletes from field sports in the literature stemming from GPS, and this includes total distance covered by players and distance in velocity bands. Global positioning systems have also been applied to detect fatigue in matches, identify periods of most intense play, different activity profiles by position, competition level, and sport. More recent research has integrated GPS data with the physical capacity or fitness test score of athletes, game-specific tasks, or tactical or strategic information. The future of GPS analysis will involve further miniaturization of devices, longer battery life, and integration of other inertial sensor data to more effectively quantify the effort of athletes.

  10. Application of high-precision 3D seismic technology to shale gas exploration: A case study of the large Jiaoshiba shale gas field in the Sichuan Basin

    Directory of Open Access Journals (Sweden)

    Zuqing Chen

    2016-03-01

    Full Text Available The accumulation pattern of the marine shale gas in South China is different from that in North America. The former has generally thin reservoirs and complex preservation conditions, so it is difficult to make a fine description of the structural features of shale formations and to reflect accurately the distribution pattern of high-quality shale by using the conventional 2D and 3D seismic exploration technology, which has an adverse effect on the successful deployment of horizontal wells. In view of this, high-precision 3D seismic prospecting focusing on lithological survey was implemented to make an accurate description of the distribution of shale gas sweet spots so that commercial shale gas production can be obtained. Therefore, due to the complex seismic geological condition of Jiaoshiba area in Fuling, SE Sichuan Basin, the observation system of high-precision 3D seismic acquisition should have such features as wide-azimuth angles, small trace intervals, high folds, uniform vertical and horizontal coverage and long spread to meet the needs of the shale gas exploration in terms of structural interpretation, lithological interpretation and fracture prediction. Based on this idea, the first implemented high-precision 3D seismic exploration project in Jiaoshiba area played an important role in the discovery of the large Jiaoshiba shale gas field. Considering that the high-quality marine shale in the Sichuan Basin shows the characteristics of multi-layer development from the Silurian system to the Cambrian system, the strategy of shale gas stereoscopic exploration should be implemented to fully obtain the oil and gas information of the shallow, medium and deep strata from the high-precision 3D seismic data, and ultimately to expand the prospecting achievements in an all-round way to balance the high upstream exploration cost, and to continue to push the efficient shale gas exploration and development process in China.

  11. High pressure technology 1994

    Energy Technology Data Exchange (ETDEWEB)

    Kapp, J.A.; Picqueuer, L.M. (eds.)

    1994-01-01

    This volume is divided into four sessions: fracture mechanics applications to high pressure vessels; high pressure code issues; high pressure design, analysis, and safety concerns; and military and other high pressure applications. Separate abstracts were prepared for eleven papers of this conference.

  12. Field-programmable custom computing technology architectures, tools, and applications

    CERN Document Server

    Luk, Wayne; Pocek, Ken

    2000-01-01

    Field-Programmable Custom Computing Technology: Architectures, Tools, and Applications brings together in one place important contributions and up-to-date research results in this fast-moving area. In seven selected chapters, the book describes the latest advances in architectures, design methods, and applications of field-programmable devices for high-performance reconfigurable systems. The contributors to this work were selected from the leading researchers and practitioners in the field. It will be valuable to anyone working or researching in the field of custom computing technology. It serves as an excellent reference, providing insight into some of the most challenging issues being examined today.

  13. Research of artifacts and compensation technology in high-field strength abdominal MRI%高场强腹部MRI伪影及补偿技术研究

    Institute of Scientific and Technical Information of China (English)

    窦社伟; 连建敏; 闫峰山; 史大鹏; 管民

    2015-01-01

    Objective To explore the cause and solution of the artifacts of abdominal imaging in high-field strength MRI scanning.Methods The artifacts from 112 cases of abdominal MR scanning were analyzed the cause,and were compensated by different techniques.Results High-field strength MRI scanning revealed respiratory motion artifacts in 43 cases,vascular pulsation artifacts in 12,chemical shift artifacts in 12,plait artifacts in 18,magnetic susceptibility artifacts in 20 and machine artifacts in 7.The artifacts in 98 cases were eliminated or reduced by adjusting respiratory gating parameters,using abdominal binder,respiratory retraining,adding saturated band upon or below scanning field,adopting fat suppression technique,enlarging field of view,adopting over sampling technique,removing metal foreign body,and adopting PROPELLER technology.Conclusion To correct the scanning parameters and methods based on the causes of artifacts can reduce the artifacts in abdominal MRI and improve the quality of MR images.%目的 探讨腹部高场强MRI检查伪影产生的原因及解决方法.方法 行高场强腹部MRI检查图像有不同程度伪影的112例患者,分析其伪影产生原因,并采用不同技术进行补偿.结果 112患者中呼吸运动伪影43例,血管搏动伪影12例,化学位移伪影12例,卷褶伪影18例,磁敏感伪影20例,设备伪影7例,经调整呼吸门控、腹部施加腹带、再次呼吸训练、扫描视野上下施加预饱和带、应用脂肪抑制技术、增加视野、应用过采样技术、去除金属异物、应用螺旋桨扫描技术等方法,98例伪影消失或减轻.结论 针对伪影产生原因改变扫描参数或扫描方法,可减少腹部高场强MRI图像的伪影,提高图像质量.

  14. High Efficiency Water Heating Technology Development Final Report. Part I, Lab/Field Performance Evaluation and Accelerated Life Testing of a Hybrid Electric Heat Pump Water Heater (HPWH)

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, Van D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Murphy, Richard W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Rice, C. Keith [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Linkous, Randall Lee [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-04-01

    DOE has supported efforts for many years with the objective of getting a water heater that uses heat pump technology (aka a heat pump water heater or HPWH) successfully on the residential equipment market. The most recent previous effort (1999-2002) produced a product that performed very well in ORNL-led accelerated durability and field tests. The commercial partner for this effort, Enviromaster International (EMI), introduced the product to the market under the trade name Watter$aver in 2002 but ceased production in 2005 due to low sales. A combination of high sales price and lack of any significant infrastructure for service after the sale were the principal reasons for the failure of this effort. What was needed for market success was a commercial partner with the manufacturing and market distribution capability necessary to allow economies of scale to lead to a viable unit price together with a strong customer service infrastructure. General Electric certainly meets these requirements, and knowing of ORNL s expertise in this area, approached ORNL with the proposal to partner in a CRADA to produce a high efficiency electric water heater. A CRADA with GE was initiated early in Fiscal Year, 2008. GE initially named its product the Hybrid Electric Water Heater (HEWH).

  15. Advanced sensing technology in environmental field.

    Science.gov (United States)

    Wakida, Shin-ichi

    2009-01-01

    Before the introduction of advanced sensing technology in environmental fields, environmental issues were discussed as several categories, such as local environmental issues in the 1970s, global environmental issues in the 1980s, living environmental issues in the 2000s and environmental stress issues in near future, which are of increasing interest in Japan. Using advanced sensing technologies, such as electrochemical sensors, chemically-sensitive field-effect transistors (ChemFETs) based on micro-electro mechanical system (MEMS) micromachining technology and subsequently electrophoretic separation and microfluidic Lab-on-a-Chip using MEMS technology, we have steered several kinds of environmental monitoring projects timely in response to the environmental issues for over the last 25 years. Among the local environmental issues, the global environmental issues and the living environmental issues, some fruits of R&D project will be introduced. Finally, our latest concern of the environmental stress monitoring was discussed and preliminary results were also introduced.

  16. High field superconducting magnets

    Science.gov (United States)

    Hait, Thomas P. (Inventor); Shirron, Peter J. (Inventor)

    2011-01-01

    A superconducting magnet includes an insulating layer disposed about the surface of a mandrel; a superconducting wire wound in adjacent turns about the mandrel to form the superconducting magnet, wherein the superconducting wire is in thermal communication with the mandrel, and the superconducting magnet has a field-to-current ratio equal to or greater than 1.1 Tesla per Ampere; a thermally conductive potting material configured to fill interstices between the adjacent turns, wherein the thermally conductive potting material and the superconducting wire provide a path for dissipation of heat; and a voltage limiting device disposed across each end of the superconducting wire, wherein the voltage limiting device is configured to prevent a voltage excursion across the superconducting wire during quench of the superconducting magnet.

  17. Near Field Communication: Technology and Market Trends

    Directory of Open Access Journals (Sweden)

    Gabriella Arcese

    2014-09-01

    Full Text Available Among the different hi-tech content domains, the telecommunications industry is one of the most relevant, in particular for the Italian economy. Moreover, Near Field Communication (NFC represents an example of innovative production and a technological introduction in the telecommunications context. It has a threefold function: card emulator, peer-to-peer communication and digital content access, and it could be pervasively integrated in many different domains, especially in the mobile payment one. The increasing attention on NFC technology from the academic community has improved an analysis on the changes and the development perspective about mobile payments. It has considered the work done by the GSMA (Global System for Mobile Communications Association and the NFC Forum in recent years. This study starts from an analysis of the scientific contributions to Near Field Communication and how the main researches on this topic were conceived. Our focus is on the diffusion rates, the adoption rates and the technology life cycle. After that, we analyze the technical-economical elements of NFC. Finally, this work presents the state of art of the improvements to this technology with a deeper focus on NFC technologies applied to the tourism industry. In this way, we have done a case analysis that shows some of the NFC existent applications linked to each stage of the tourism value chain.

  18. Digital Technology for Geological Field Mapping

    Science.gov (United States)

    Rourke, Peter; Smith, Stuart; Vaughan, Alan; Ellis, Jenny

    2014-05-01

    The amount of time that students and professionals spend in the field has reduced over the past 25 years (Gibbs, 2012). Recent advances in technology are changing the way students and professionals are able to conduct geological field study. Applications such as Midland Valley Exploration's FieldMove Clino now allow the geologist to use their smartphone as a fast, georeferenced measuring device compared with a traditional compass-clinometer. Although we support the view that an understanding of field mapping and model building, taught at university level, is essential to give the geologist the ability to think in three and four dimensions, new technologies that automate the ability to digitise and visualise data in the field lead to a better appreciation of the geometry, scale, and evolution of geological structures and trapping mechanisms that will be encountered during a career in industry. The majority of future industry professionals own a smartphone or tablet device: A recent study found that four-fifths of new students own a smartphone and one-fifth own a tablet device (UCAS Media, 2013). This figure is increasing with each new intake of geoscience students. With the increased availability and affordability of smartphone and tablet devices, new techniques are being examined for digital data collection in the field. If the trend continues that geoscience students are likely to spend less time in the field than their predecessors, then the time available must be spent as effectively as possible. Digital devices allow students and professionals alike to optimise the time spent in the field, allowing more time to think about geological relationships, and highlighting areas of uncertainty that can be studied further. This poster will examine the use of new digital smartphone and tablet devices for the collection of geological field data.

  19. Rydberg EIT in High Magnetic Field

    Science.gov (United States)

    Ma, Lu; Anderson, David; Miller, Stephanie; Raithel, Georg

    2016-05-01

    We present progress towards an all-optical approach for measurements of strong magnetic fields using electromagnetically induced transparency (EIT) with Rydberg atoms in an atomic vapor. Rydberg EIT spectroscopy is a promising technique for the development of atom-based, calibration- and drift-free technology for high magnetic field sensing. In this effort, Rydberg EIT is employed to spectroscopically investigate the response of Rydberg atoms exposed to strong magnetic fields, in which Rydberg atoms are in the strong-field regime. In our setup, two neodymium block magnets are used to generate fields of about 0.8 Tesla, which strongly perturb the atoms. Information on the field strength and direction is obtained by a comparison of experimental spectra with calculated spectral maps. Investigations of magnetic-field inhomogeneities and other decoherence sources will be discussed.

  20. Antenna development for high field plasma imaging.

    Science.gov (United States)

    Kong, X; Domier, C W; Luhmann, N C

    2010-10-01

    Electron cyclotron emission imaging (ECEI) and microwave imaging reflectometry (MIR) are two microwave nonperturbing plasma visualization techniques that employ millimeter-wave imaging arrays with lens-coupled planar antennas, yielding time-resolved images of temperature (via ECEI) and electron density (via MIR) fluctuations within high temperature magnetic fusion plasmas. A series of new planar antennas have been developed that extend this technology to frequencies as high as 220 GHz for use on high field plasma devices with toroidal fields in excess of 3 T. Antenna designs are presented together with theoretical calculations, simulations, and experimental measurements.

  1. High Efficiency Engine Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Rich Kruiswyk

    2010-07-13

    Caterpillar's Product Development and Global Technology Division carried out a research program on waste heat recovery with support from DOE (Department of Energy) and the DOE National Energy Technology Laboratory. The objective of the program was to develop a new air management and exhaust energy recovery system that would demonstrate a minimum 10% improvement in thermal efficiency over a base heavy-duty on-highway diesel truck engine. The base engine for this program was a 2007 C15 15.2L series-turbocharged on-highway truck engine with a LPL (low-pressure loop) exhaust recirculation system. The focus of the program was on the development of high efficiency turbomachinery and a high efficiency turbocompound waste heat recovery system. The focus of each area of development was as follows: (1) For turbine stages, the focus was on investigation and development of technologies that would improve on-engine exhaust energy utilization compared to the conventional radial turbines in widespread use today. (2) For compressor stages, the focus was on investigating compressor wheel design parameters beyond the range typically utilized in production, to determine the potential efficiency benefits thereof. (3) For turbocompound, the focus was on the development of a robust bearing system that would provide higher bearing efficiencies compared to systems used in turbocompound power turbines in production. None of the turbocharger technologies investigated involved addition of moving parts, actuators, or exotic materials, thereby increasing the likelihood of a favorable cost-value tradeoff for each technology. And the turbocompound system requires less hardware addition than competing bottoming cycle technologies, making it a more attractive solution from a cost and packaging standpoint. Main outcomes of the program are as follows: (1) Two turbine technologies that demonstrated up to 6% improvement in turbine efficiency on gas stand and 1-3% improvement in thermal efficiency

  2. High Efficiency Engine Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Rich Kruiswyk

    2010-07-13

    Caterpillar's Product Development and Global Technology Division carried out a research program on waste heat recovery with support from DOE (Department of Energy) and the DOE National Energy Technology Laboratory. The objective of the program was to develop a new air management and exhaust energy recovery system that would demonstrate a minimum 10% improvement in thermal efficiency over a base heavy-duty on-highway diesel truck engine. The base engine for this program was a 2007 C15 15.2L series-turbocharged on-highway truck engine with a LPL (low-pressure loop) exhaust recirculation system. The focus of the program was on the development of high efficiency turbomachinery and a high efficiency turbocompound waste heat recovery system. The focus of each area of development was as follows: (1) For turbine stages, the focus was on investigation and development of technologies that would improve on-engine exhaust energy utilization compared to the conventional radial turbines in widespread use today. (2) For compressor stages, the focus was on investigating compressor wheel design parameters beyond the range typically utilized in production, to determine the potential efficiency benefits thereof. (3) For turbocompound, the focus was on the development of a robust bearing system that would provide higher bearing efficiencies compared to systems used in turbocompound power turbines in production. None of the turbocharger technologies investigated involved addition of moving parts, actuators, or exotic materials, thereby increasing the likelihood of a favorable cost-value tradeoff for each technology. And the turbocompound system requires less hardware addition than competing bottoming cycle technologies, making it a more attractive solution from a cost and packaging standpoint. Main outcomes of the program are as follows: (1) Two turbine technologies that demonstrated up to 6% improvement in turbine efficiency on gas stand and 1-3% improvement in thermal efficiency

  3. High Performance Tools And Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Collette, M R; Corey, I R; Johnson, J R

    2005-01-24

    This goal of this project was to evaluate the capability and limits of current scientific simulation development tools and technologies with specific focus on their suitability for use with the next generation of scientific parallel applications and High Performance Computing (HPC) platforms. The opinions expressed in this document are those of the authors, and reflect the authors' current understanding and functionality of the many tools investigated. As a deliverable for this effort, we are presenting this report describing our findings along with an associated spreadsheet outlining current capabilities and characteristics of leading and emerging tools in the high performance computing arena. This first chapter summarizes our findings (which are detailed in the other chapters) and presents our conclusions, remarks, and anticipations for the future. In the second chapter, we detail how various teams in our local high performance community utilize HPC tools and technologies, and mention some common concerns they have about them. In the third chapter, we review the platforms currently or potentially available to utilize these tools and technologies on to help in software development. Subsequent chapters attempt to provide an exhaustive overview of the available parallel software development tools and technologies, including their strong and weak points and future concerns. We categorize them as debuggers, memory checkers, performance analysis tools, communication libraries, data visualization programs, and other parallel development aides. The last chapter contains our closing information. Included with this paper at the end is a table of the discussed development tools and their operational environment.

  4. Field application of pathogen detection technologies

    Energy Technology Data Exchange (ETDEWEB)

    Straub, Tim M.; Call, Douglas R.; Bruckner-Lea, Cindy J.; Colburn, Heather A.; Baird, Cheryl L.; Bartholomew, Rachel A.; Ozanich, Richard M.; Jarman, Kristin H.

    2016-06-29

    Over the last 10 years there has been a significant increase in commercial products designed for field-based detection of microbial pathogens. This is due, in part, to the anthrax attacks in the United States in 2001, and the need for first responders to quickly identify the composition of suspected white powders and other potential biothreats. Demand for rapid detection is also driven by the need to ensure safe food, water, and environmental systems. From a technology perspective, rapid identification methods have largely capitalized on PCR and other molecular recognition techniques that can be deployed as robust field instrumentation. Examples of the relevant needs include the ability to: 1) declare a water distribution system free of microbial pathogens after a pipe/main break repair; 2) assess risks of contamination such as when produce production and processing plants are located near concentrated animal feeing operations; 3) evaluate the safety of ready-to-eat products; 4) determine the extent of potential serious disease outbreaks in remote and/or disaster stricken areas where access to clinical laboratories is not an immediate option; and 5) quickly assess credible biological terrorism events. Many of the principles underlying rapid detection methods are derived from methods for environmental microbiology, but there is a dearth of literature describing and evaluating field-based detection systems. Thus, the aims of this chapter are to: 1) summarize the different kinds of commercially available sampling kits and field-based biological detectors; 2) highlight some of the continued challenges of sample preparation to stimulate new research towards minimizing the impact of inhibitors on PCR-based detection systems; 3) describe our general rationale and statistically-based approach for instrument evaluation; 4) provide statistical and spatial guidelines for developing valid sampling plans; and 5) summarize some current needs and emerging technologies. This

  5. Health Technology Assessment: a field still maturing!

    Directory of Open Access Journals (Sweden)

    Renaldo N. Battista

    2005-06-01

    Full Text Available

    With this issue’s focus on Health Technology Assessment (HTA, the Italian Journal of Public Health has tackled an area of growing importance in today’s increasingly complex health care delivery systems.

    As the articles in this issue demonstrate, HTA has grown from a relatively narrow technical focus to a form of policy research underway in dozens of countries. Since its inception just over three decades ago,HTA has evolved through three distinct phases: the machine, the disease and the delivery mode, with the third of these still underway.

    As the focus has shifted from machines to disease conditions to service delivery approaches, HTA has drawn on research and modes of discourse from a growing variety of disciplines. Thus, despite the evolution that continues, HTA remains, at its core, both multidisciplinary and pragmatic, for the strengths of HTA arise from its integration of the efforts of actors in multiple, diverse disciplines with a view to producing knowledge that will assist decision-makers. The machine phase was marked by a focus on the technical performance of health technologies, often embodying innovative approaches to diagnosis or treatment of human illness.

    Given the newness and costliness of many technologies selected for assessment, a significant emphasis was placed on assessing the safety of these devices. Imaging technologies were the subject of assessment in many settings, perhaps in part because devices such as the CT scanner produced remarkable visual results that were heralded as affording breakthroughs in diagnosis and treatment. One need only look through the programs of early HTA conferences to see the emphasis on high cost, infrastructure-intensive health technologies that was the hallmark of the machine period.

  6. New technological developments in integral field spectroscopy

    Science.gov (United States)

    Vives, S.; Prieto, E.; Salaun, Y.; Godefroy, P.

    2008-07-01

    Integral Field Spectroscopy (IFS) provides a spectrum simultaneously for each spatial sample of an extended two-dimensional field. Basically, the IFS is located in a telescope focal plane and is composed by an Integral Field Unit (IFU or image slicer) and a spectrograph. The IFU acts as a coupler between the telescope and the spectrograph by reformatting optically a rectangular field into a quasi-continuous pseudo-slit located at the entrance focal plane of the spectrograph. The Integral Field Units (IFUs) are presently limited either by their cost/risk (when manufactured with classical glass polishing techniques) or by their performances (when constituted by metallic components). Recent innovative methods, developed conjointly by LAM (Laboratoire d'Astrophysique de Marseille, France; WinLight Optics (Marseille, France), allow reaching high performances (accurate roughness, sharp edges, surface form, etc.) with standard glass manufactured components while saving costs and time by an order of magnitude compared with classical techniques. Last developments (in term of design and manufacturing) and applications are presented in details in this article.

  7. High Efficiency Polymer Solar Cells Technologies

    Institute of Scientific and Technical Information of China (English)

    Abdrhman M G; LI Hang-quan; ZHANG Li-ye; ZHOU Bing

    2006-01-01

    The conjugated polymer-based solar cell is one of the most promising devices in search of sustainable, renewable energy sources in last decade. It is the youngest field in organic solar cell research and also is certainly the fastest growing one at the moment. In addition, the key factor for polymer-based solar cells with high-efficiency is to invent new materials. Organic solar cell has attracted significant researches and commercial interest due to its low cost in fabrication and flexibility in applications. However, they suffer from relatively low conversion efficiency. The summarization of the significance and concept of high efficiency polymer solar cell technologies are presented.

  8. High magnetic fields in the USA

    Science.gov (United States)

    Campbell, Laurence J.; Parkin, Don E.; Crow, Jack E.; Schneider-Muntau, Hans J.; Sullivan, Neil S.

    During the past thirty years research using high magnetic fields has technically evolved in the manner, but not the magnitude, of the so-called big science areas of particle physics, plasma physics, neutron scattering, synchrotron light scattering, and astronomy. Starting from the laboratories of individual researchers it moved to a few larger universities, then to centralized national facilities with research and maintenance staffs, and, finally, to joint international ventures to build unique facilities, as illustrated by the subject of this conference. To better understand the nature of this type of research and its societal justification it is helpful to compare it, in general terms, with the aforementioned big-science fields. High magnetic field research differs from particle physics, plasma physics, and astronomy in three respects: (1) it is generic research that cuts across a wide range of scientific disciplines in physics, chemistry, biology, medicine, and engineering; (2) it studies materials and processes that are relevant for a variety of technological applications and it gives insight into biological processes; (3) it has produced, at least, comparably significant results with incomparably smaller resources. Unlike neutron and synchrotron light scattering, which probe matter, high magnetic fields change the thermodynamic state of matter. This change of state is fundamental and independent of other state variables, such as pressure and temperature. After the magnetic field is applied, various techniques are then used to study the new state.

  9. Design of sewage treatment system based on high-voltage pulsed electric field technology%基于高压脉冲电场技术的污水处理系统研究设计

    Institute of Scientific and Technical Information of China (English)

    李唐; 王亚伟; 赵振良; 尤丽华

    2013-01-01

    针对污水处理厂剩余污泥含水率高,达到70%-80%,不利于进一步处理的问题,根据污水成分及其处理工艺特点,提出了一种基于高压脉冲电场技术的污水处理的方法.本文从理论上系统地阐述了高压脉冲电场处理装置的研制,设计了低成本高压脉冲电源,最高电压10 kV,最大电流50A,并且能方便的调节电场参数.%Contrary to the problem that the high moisture content of the excess sludge of the sewage treatment plant, up to 70% to 80% , the paper proposed a sewage treatment method based on the high-voltage pulse electric field (HPEF) technology, according to the composition of sewage and the feature of its treatment technology.The paper systematically expounded of how to design a pulsed electric field theoretically,and design a low-cost high-voltage pulse power supply with the peak impulse voltage 10 kV and impulse current to 50 A, which also can easily adjust the electric field parameters.

  10. Resonant Magnetic Field Sensors Based On MEMS Technology

    Science.gov (United States)

    Herrera-May, Agustín L.; Aguilera-Cortés, Luz A.; García-Ramírez, Pedro J.; Manjarrez, Elías

    2009-01-01

    Microelectromechanical systems (MEMS) technology allows the integration of magnetic field sensors with electronic components, which presents important advantages such as small size, light weight, minimum power consumption, low cost, better sensitivity and high resolution. We present a discussion and review of resonant magnetic field sensors based on MEMS technology. In practice, these sensors exploit the Lorentz force in order to detect external magnetic fields through the displacement of resonant structures, which are measured with optical, capacitive, and piezoresistive sensing techniques. From these, the optical sensing presents immunity to electromagnetic interference (EMI) and reduces the read-out electronic complexity. Moreover, piezoresistive sensing requires an easy fabrication process as well as a standard packaging. A description of the operation mechanisms, advantages and drawbacks of each sensor is considered. MEMS magnetic field sensors are a potential alternative for numerous applications, including the automotive industry, military, medical, telecommunications, oceanographic, spatial, and environment science. In addition, future markets will need the development of several sensors on a single chip for measuring different parameters such as the magnetic field, pressure, temperature and acceleration. PMID:22408480

  11. High-performance phase-field modeling

    KAUST Repository

    Vignal, Philippe

    2015-04-27

    Many processes in engineering and sciences involve the evolution of interfaces. Among the mathematical frameworks developed to model these types of problems, the phase-field method has emerged as a possible solution. Phase-fields nonetheless lead to complex nonlinear, high-order partial differential equations, whose solution poses mathematical and computational challenges. Guaranteeing some of the physical properties of the equations has lead to the development of efficient algorithms and discretizations capable of recovering said properties by construction [2, 5]. This work builds-up on these ideas, and proposes novel discretization strategies that guarantee numerical energy dissipation for both conserved and non-conserved phase-field models. The temporal discretization is based on a novel method which relies on Taylor series and ensures strong energy stability. It is second-order accurate, and can also be rendered linear to speed-up the solution process [4]. The spatial discretization relies on Isogeometric Analysis, a finite element method that possesses the k-refinement technology and enables the generation of high-order, high-continuity basis functions. These basis functions are well suited to handle the high-order operators present in phase-field models. Two-dimensional and three dimensional results of the Allen-Cahn, Cahn-Hilliard, Swift-Hohenberg and phase-field crystal equation will be presented, which corroborate the theoretical findings, and illustrate the robustness of the method. Results related to more challenging examples, namely the Navier-Stokes Cahn-Hilliard and a diusion-reaction Cahn-Hilliard system, will also be presented. The implementation was done in PetIGA and PetIGA-MF, high-performance Isogeometric Analysis frameworks [1, 3], designed to handle non-linear, time-dependent problems.

  12. Green technology foresight of high technology: a social shaping of technology approach to the analysis of hopes and hypes

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Jørgensen, Ulrik

    2009-01-01

    High tech visions play an important part in public technology policy and are often promoted through technology foresights. The article presents and analyses results from a green technology foresight of nano-, bio- and information- and communication technologies initiated by the Danish Environmental...... Protection Agency with the purpose of acquiring knowledge about the environmental potentials and risks related to the three areas of technology. The foresight was organized with a social shaping of technology (SST) approach to the field in order to cater for the complex relationship between societal demands......, technology options, innovation dynamics and environmental impacts. The approach involved studying actor-networks, laboratory programs and technology trajectories as well as deconstructing different stakeholders’ high tech visions. The identified environmental potentials and risks related to the three areas...

  13. Bringing Technology into High School Physics Classrooms

    Science.gov (United States)

    Zettili, Nouredine

    2005-04-01

    In an effort to help high school physics teachers bring technology into their classrooms, we at JSU have been offering professional development to secondary education teachers. This effort is part of Project IMPACTSEED (IMproving Physics And Chemistry Teaching in SEcondary Education), a No-Child Left Behind (NCLB) grant funded by the Alabama Commission on Higher Education, serving high school physics teachers in Northeast Alabama. This project is motivated by a major pressing local need: A large number of high school physics teachers teach out of field. To achieve IMPACTSEED's goals, we have forged a functional collaboration with school districts from about ten counties. This collaboration is aimed at achieving a double aim: (a) to make physics and chemistry understandable and fun to learn within a hands-on, inquiry-based setting; (b) to overcome the fear- factor for physics and chemistry among students. Through a two-week long summer institute, a series of weekend technology workshops, and onsite support, we have been providing year-round support to the physics/chemistry teachers in this area. This outreach initiative has helped provide our students with a physics/chemistry education that enjoys a great deal of continuity and consistency from high school to college.

  14. IAEA programme in the field of radiation technology

    Science.gov (United States)

    Chmielewski, Andrzej G.; Haji-Saeid, Mohammad

    2005-07-01

    Radiation technologies applying gamma sources and electron accelerators for material modification are well-established processes. There are over 160 gamma industrial irradiators and 1300 electron industrial accelerators in operation worldwide. A new advancement in the field of radiation sources engineering is the development of high power direct e-/X conversion sources based on electron accelerators. Technologies to be developed beside environmental applications could be nanomaterials, structure engineered materials (sorbents, composites, ordered polymers, etc.) and natural polymers' processing. New products based on radiation-processed polysaccharides have already been commercialised in many countries of the East Asia and Pacific Region, especially in those being rich in natural polymers. Very important and promising applications concern environmental protection-radiation technology, being a clean and environment friendly process, helps to curb pollutants' emission as well. Industrial plants for flue gas treatment have been constructed in Poland and China. The pilot plant in Bulgaria using this technology has just started its operation. The Polish plant is equipped with accelerators of over 1 MW power, a breakthrough in radiation technology application. The industrial plant for wastewater treatment is under development in Korea and a pilot plant for sewage sludge irradiation has been in operation in India for many years. Due to recent developments, the Agency has restructured its programme and organized a Technical Meeting (TM) on "Emerging Applications of Radiation Technology for the 21st Century" at its Headquarters in Vienna, Austria, in April 2003, to review the present situation and possible developments of radiation technology to contribute to a sustainable development. This meeting provided the basic input to launch others in the most important fields of radiation technology applications: "Advances in Radiation Chemistry of Polymers" (Notre Dame, USA

  15. Farm Crop Production Technology: Field and Forage Crop and Fruit and Vine Production Options. A Suggested 2-Year Post High School Curriculum.

    Science.gov (United States)

    Division of Vocational and Technical Education, BAVT.

    Prepared by a junior college under contract with the Office of Education, the curriculum materials are designed to assist school administrators, advisory committees, supervisors, and teachers in developing or evaluating postsecondary programs in farm crop production technology. Information was gathered by visits to the important farm regions and…

  16. The Project for the New High Field Facility

    OpenAIRE

    Motokawa, M.

    1996-01-01

    Since High Field Laboratory for Superconducting Materials attached to Institute for Materials Research of Tohoku University started, 15 years has passed. We have had plenty of fruitful scientific and technological results not only in a field of superconductivity but also in areas of magnetism, semiconductors, organic conductors, chemical and biological materials and crystallography. The equipments in the Laboratory, however, are now getting aged and the available high field of 31 T obtained b...

  17. LHC collars - 12 million high technology gems

    CERN Multimedia

    2001-01-01

    Some 12 million steel collars will keep the LHC dipole magnet structures rigid. Their production has just begun. A huge job began last week: the high speed manufacturing of twelve million steel collars for the 1250 dipole magnets of the future Large Hadron Collider, LHC. The challenge is not only a matter of quantity: these collars are very high technology components because of the important role they play in the way the collider works. One of the main difficulties with the accelerator is that the magnetic field that keeps particles in orbit must have the same configuration and intensity in all the dipoles. But when the 8.33 tesla magnetic field is on -100.000 times the earth magnetic field - it produces a very strong force that can deform the 'soft' parts of the magnets, such as superconducting coils. The force loading one metre of dipole is almost comparable with the weight of a Boeing 747 - about 400 tonnes - so a huge deformation would occur without a mechanical component to keep the whole structure rigid...

  18. Problems of Electromagnetic Filtration of Technological Liquid on the Basis of Iron-Containing Particle Deposition in High-Gradient Magnetic Field

    Directory of Open Access Journals (Sweden)

    R. A. Muradova

    2006-01-01

    Full Text Available Conventional methods for separation of liquid systems are out of use for cleaning liquid products of chemical technology from finely dispersed micro-quantity of iron-containing particles. Majority of these impurities is characterized by magneto-receptive behavior, in other words they exhibit a capability for magnetic precipitation; so application of magnetic precipitating filters shows promise for a removal of such particles.

  19. High speed technology development and evaluation

    Science.gov (United States)

    Parker, D. R.; Brown, E. R.; Dickson, J. F.

    1986-10-01

    Semiconductor technology suited to high on-board data handling rates was investigated. Very high speed discrete logic and high speed gate arrays; single chip digital signal processors and single chip floating point processing peripherals; and analog CCD technologies and custom designed CCD chips for synthetic aperture radar applications were assessed. The 2 micron CMOS technology is highly reliable, supporting semicustom design techniques. Process JGC, the CCD technology, is highly reliable except for tolerance to ionizing radiation. Reliability of the ECL 16-bit serial-parallel parallel-serial converter junction isolated bipolar process, process WZA, is compromised by a design error and oxide contamination contributing to high leakage levels. The bipolar circuit is tolerant to an ionizing radiation of 20kRad. Step stress environmental testing to 200 C produces no failures in CMOS and CCD technologies, but accelerates the degradation of the oxide contaminated bipolar process. All technologies are susceptible to single event upsets.

  20. The laser measurement technology of combustion flow field

    Science.gov (United States)

    Wang, Mingdong; Wang, Guangyu; Qu, Dongsheng

    2014-07-01

    The parameters of combustion flow field such as temperature, velocity, pressure and mole-fraction are of significant value in engineering application. The laser spectroscopy technology which has the non-contact and non- interference properties has become the most important method and it has more advantages than conventionally contacting measurement. Planar laser induced fluorescence (PLIF/LIF) is provided with high sensibility and resolution. Filtered Rayleigh scattering (FRS) is a good measurement method for complex flow field .Tunable diode laser absorption spectroscopy (TDLAS) is prosperity on development and application. This article introduced the theoretical foundation, technical principle, system structure, merits and shortages. It is helpful for researchers to know about the latest development tendency and do the related research.

  1. High Technology Ceramics in Japan

    Science.gov (United States)

    1984-07-14

    of evolutionary charoge T’LE i a Markt She of tlh-T o Japan. 1m (in 4min t4 dolkla)" Japaman Percer""g Sector Appkhi DoamiC Sale" of Total Etcvo... segments populated by buyers willing to acquire products embodying the new technology, even though the cost ma, he somewhat grcmterthan that of...looking for new ways to segment the market in order ,o rekindle consumer interest. New technology like ceramics may well be onewa, to do this. for there is

  2. High Speed and Slow Motion: The Technology of Modern High Speed Cameras

    Science.gov (United States)

    Vollmer, Michael; Mollmann, Klaus-Peter

    2011-01-01

    The enormous progress in the fields of microsystem technology, microelectronics and computer science has led to the development of powerful high speed cameras. Recently a number of such cameras became available as low cost consumer products which can also be used for the teaching of physics. The technology of high speed cameras is discussed,…

  3. High technology revisited: definition and position

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2006-01-01

    This paper proposes a new approach to defining high technology by distinguishing two different aspects. First, complexity, which is a more or less a `static' view on high technology and is applied to both the final product as well as the production process. Second, the newness, relates to a

  4. High Technology in the Vocational Agriculture Classroom.

    Science.gov (United States)

    Camp, William G.

    While many aspects of high technology may be directly applicable in the vocational agricultural classroom, the primary thrust of high technology into such programs, at least in the short range, will be centered around the microcomputer. Because of its cost and availability, the microcomputer will continue to play an ever increasing role in…

  5. Field precision machining technology of target chamber in ICF lasers

    Science.gov (United States)

    Xu, Yuanli; Wu, Wenkai; Shi, Sucun; Duan, Lin; Chen, Gang; Wang, Baoxu; Song, Yugang; Liu, Huilin; Zhu, Mingzhi

    2016-10-01

    In ICF lasers, many independent laser beams are required to be positioned on target with a very high degree of accuracy during a shot. The target chamber provides a precision platform and datum reference for final optics assembly and target collimation and location system. The target chamber consists of shell with welded flanges, reinforced concrete pedestal, and lateral support structure. The field precision machining technology of target chamber in ICF lasers have been developed based on ShenGuangIII (SGIII). The same center of the target chamber is adopted in the process of design, fabrication, and alignment. The technologies of beam collimation and datum reference transformation are developed for the fabrication, positioning and adjustment of target chamber. A supporting and rotating mechanism and a special drilling machine are developed to bore the holes of ports. An adjustment mechanism is designed to accurately position the target chamber. In order to ensure the collimation requirements of the beam leading and focusing and the target positioning, custom-machined spacers are used to accurately correct the alignment error of the ports. Finally, this paper describes the chamber center, orientation, and centering alignment error measurements of SGIII. The measurements show the field precision machining of SGIII target chamber meet its design requirement. These information can be used on similar systems.

  6. Broadband Electric-Field Sensor Array Technology

    Science.gov (United States)

    2012-08-05

    the RF DUT. The RF receiver measures the power output from the photodiode, Prf. Fringing RF electric fields from a microstrip resonator circuit ...are measured by placing the ring resonators on top of the circuit . A photograph of the microstrip resonator circuit is shown in Fig. 6(b). The... circuit is a one port device and consists of a 50 Ω input line gap-coupled to a second 50 Ω microstrip line resonator. From vector network analyzer (VNA

  7. High Impact Technology Compact Combustion (HITCC) Compact Core Technologies

    Science.gov (United States)

    2016-01-01

    the CO and CO2 net reaction rates from the FGM. This, in turn, provides another benefit . That is, the source term in YC is not just now dependent on...AFRL-RQ-WP-TR-2016-0010 HIGH IMPACT TECHNOLOGY COMPACT COMBUSTION (HITCC) COMPACT CORE TECHNOLOGIES Andrew W. Caswell Combustion...information exchange, and its publication does not constitute the Government’s approval or disapproval of its ideas or findings. *Disseminated

  8. High Efficient Technology of Enclosed Weeding in Hemp Field%大麻高效除草(封闭)技术研究

    Institute of Scientific and Technical Information of China (English)

    宋宪友

    2012-01-01

    本文利用不同除草剂进行播后苗前(封闭)处理,对大麻生产期田间杂草综合防治效果进行了研究.研究结果表明:采用65%异丙甲草胺乳油3L/hm2封闭除草,对禾本科杂草防效可达55.6%,对阔叶杂草龙葵、藜、蓼、苋的防治效果分别达到66.7%、37.5%、88.9%、89.5%,对阔叶杂草蓼、苋防治效果比较理想;采用40%施田扑乳油3L/hm2封闭除草,对禾本科杂草防效可达63.9%,对阔叶杂草龙葵、藜、蓼、苋的防治效果分别达到75.0%、75.0%、66.7%、57.9%,阔叶杂草龙葵、藜比较理想.两种除草剂对禾本科杂草均较好的抑制生长效果.%In this paper, we had a study on the weeding efficiencies of two herbicides in hemp field, the herbicides were sprayed after sowing but before seedling emerging (enclosed weeding). The results were: Using 65% of EC (dosage was SL/hm2), the control efficiency of the grass family weed could be 55.6%, and the control efficiencies of the broad leaf weed including nightshade, lamb's -quarters, knotweed and amaranth were 66.7%, 37.5%, 88.9% and 89.5% respectively. This herbicide had good control for knotweed and amaranth. Using 40% of Phendimethalin (dosage was dUhm2), the control efficiency of the grass family weed could be 63.9%, and the control efficiencies of the broad leaf weed including nightshade, lamb's-quarters, knotweed and amaranth were 75%, 75%, 66.7% and 57.9% respectively. This herbicide had good control for nightshade and lamb's-quarters. Both the herbicides had good control for the grass family weed.

  9. HTRF(®): pioneering technology for high-throughput screening.

    Science.gov (United States)

    Degorce, François

    2006-12-01

    Cisbio international pioneered the field of homogeneous fluorescence methodologies and time-resolved fluorescence resonance in particular, through its proprietary technology, HTRF(®). The development was based on Prof. Jean-Marie Lehn's research on rare earth fluorescence properties (awarded the Nobel Prize in Chemistry in 1987) and on Cisbio's expertise in homogenous time-resolved fluorescence (HTRF). The technology is used in assay development and drug screening, most notably in high-throughput screening applications. This highly powerful technology is particularly applied to the areas of G-protein-coupled receptor and kinase screening, as well as a series of targets related to inflammation, metabolic diseases and CNS disorders.

  10. Field Demonstraton of Existing Microhole Coiled Tubing Rig (MCTR) Technology

    Energy Technology Data Exchange (ETDEWEB)

    Kent Perry; Samih Batarseh; Sheriff Gowelly; Thomas Hayes

    2006-05-09

    The performance of an advanced Microhole Coiled Tubing Rig (MCTR) has been measured in the field during the drilling of 25 test wells in the Niobrara formation of Western Kansas and Eastern Colorado. The coiled tubing (CT) rig designed, built and operated by Advanced Drilling Technologies (ADT), was documented in its performance by GTI staff in the course of drilling wells ranging in depth from 500 to nearly 3,000 feet. Access to well sites in the Niobrara for documenting CT rig performance was provided by Rosewood Resources of Arlington, VA. The ADT CT rig was selected for field performance evaluation because it is one of the most advanced commercial CT rig designs that demonstrate a high degree of process integration and ease of set-up and operation. Employing an information collection protocol, data was collected from the ADT CT rig during 25 drilling events that encompassed a wide range of depths and drilling conditions in the Niobrara. Information collected included time-function data, selected parametric information indicating CT rig operational conditions, staffing levels, and field observations of the CT rig in each phase of operation, from rig up to rig down. The data obtained in this field evaluation indicates that the ADT CT rig exhibited excellent performance in the drilling and completion of more than 25 wells in the Niobrara under varied drilling depths and formation conditions. In the majority of the 25 project well drilling events, ROP values ranged between 300 and 620 feet per hour. For all but the lowest 2 wells, ROP values averaged approximately 400 feet per hour, representing an excellent drilling capability. Most wells of depths between 500 and 2,000 feet were drilled at a total functional rig time of less than 16 hours; for wells as deep at 2,500 to 3,000 feet, the total rig time for the CT unit is usually well under one day. About 40-55 percent of the functional rig time is divided evenly between drilling and casing/cementing. The balance of

  11. Field Demonstraton of Existing Microhole Coiled Tubing Rig (MCTR) Technology

    Energy Technology Data Exchange (ETDEWEB)

    Kent Perry; Samih Batarseh; Sheriff Gowelly; Thomas Hayes

    2006-05-09

    The performance of an advanced Microhole Coiled Tubing Rig (MCTR) has been measured in the field during the drilling of 25 test wells in the Niobrara formation of Western Kansas and Eastern Colorado. The coiled tubing (CT) rig designed, built and operated by Advanced Drilling Technologies (ADT), was documented in its performance by GTI staff in the course of drilling wells ranging in depth from 500 to nearly 3,000 feet. Access to well sites in the Niobrara for documenting CT rig performance was provided by Rosewood Resources of Arlington, VA. The ADT CT rig was selected for field performance evaluation because it is one of the most advanced commercial CT rig designs that demonstrate a high degree of process integration and ease of set-up and operation. Employing an information collection protocol, data was collected from the ADT CT rig during 25 drilling events that encompassed a wide range of depths and drilling conditions in the Niobrara. Information collected included time-function data, selected parametric information indicating CT rig operational conditions, staffing levels, and field observations of the CT rig in each phase of operation, from rig up to rig down. The data obtained in this field evaluation indicates that the ADT CT rig exhibited excellent performance in the drilling and completion of more than 25 wells in the Niobrara under varied drilling depths and formation conditions. In the majority of the 25 project well drilling events, ROP values ranged between 300 and 620 feet per hour. For all but the lowest 2 wells, ROP values averaged approximately 400 feet per hour, representing an excellent drilling capability. Most wells of depths between 500 and 2,000 feet were drilled at a total functional rig time of less than 16 hours; for wells as deep at 2,500 to 3,000 feet, the total rig time for the CT unit is usually well under one day. About 40-55 percent of the functional rig time is divided evenly between drilling and casing/cementing. The balance of

  12. Photonic Technologies for Ultra-High-Speed Information Highways

    DEFF Research Database (Denmark)

    Bouchoule, S; Lèfevre, R.; Legros, E.;

    1999-01-01

    The ACTS project HIGHWAY (AC067) addresses promising ultra-high speed optoelectronic components and system technologies for 40 Gbit/s time-division-multiplexed (TDM) transport systems. Advanced 40 Gbit/s TDM system lab demonstrators are to be realized and tested over installed field fiber testbed....... This paper reviews the current status of 40 Gbit/s TDM components and subsystem technologies achieved in HIGHWAY. The results of HIGHWAY 40 Gbit/s TDM systems and field tests will be reported in a subsequent paper. (C) 1999 Academic Press.......The ACTS project HIGHWAY (AC067) addresses promising ultra-high speed optoelectronic components and system technologies for 40 Gbit/s time-division-multiplexed (TDM) transport systems. Advanced 40 Gbit/s TDM system lab demonstrators are to be realized and tested over installed field fiber testbeds...

  13. Factors Affecting Teachers' Competence in the Field of Information Technology

    Science.gov (United States)

    Tambunan, Hamonangan

    2014-01-01

    The development of learning technology today, have a direct impact on improving teachers' information technology competence. This paper is presented the results of research related to teachers' information technology competence. The study was conducted with a survey of some 245 vocational high school teachers. There are two types of instrument…

  14. High Power Betavoltaic Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed innovation will dramatically improve the performance of tritium-powered betavoltaic batteries through the development of a high-aspect ratio, expanded...

  15. Demonstration and Field Test of airjacket technology

    Energy Technology Data Exchange (ETDEWEB)

    Faulkner, D.; Fisk, W.J.; Gadgil, A.J.; Sullivan, D.P.

    1998-06-01

    There are approximately 600,000 paint spray workers in the United States applying paints and coatings with some type of sprayer. Approximately 5% of these spray workers are in the South Coast Air Quality Management District (SCAQMD). These spray workers apply paints or other coatings to products such as bridges, houses, automobiles, wood and metal furniture, and other consumer and industrial products. The materials being sprayed include exterior and interior paints, lacquers, primers, shellacs, stains and varnishes. Our experimental findings indicate that the Airjacket does not significantly reduce the exposure of spray workers to paint fumes during HVLP spraying. The difference between ideal and actual spray paint procedures influence the mechanisms driving spray workers exposures to paint fumes and influence the viability of the Airjacket technology. In the ideal procedure, for which the Airjacket was conceived, the spray worker's exposure to paint fumes is due largely to the formation of a recirculating eddy between the spray worker and the object painted. The Airjacket ejects air to diminish and ventilate this eddy. In actual practice, exposures may result largely from directing paint upstream and from the bounce-back of the air/paint jet of the object being painted. The Airjacket, would not be expected to dramatically reduce exposures to paint fumes when the paint is not directed downstream or when the bounce-back of paint on the object creates a cloud of paint aerosols around the spray worker.

  16. High temperature vapors science and technology

    CERN Document Server

    Hastie, John

    2012-01-01

    High Temperature Vapors: Science and Technology focuses on the relationship of the basic science of high-temperature vapors to some areas of discernible practical importance in modern science and technology. The major high-temperature problem areas selected for discussion include chemical vapor transport and deposition; the vapor phase aspects of corrosion, combustion, and energy systems; and extraterrestrial high-temperature species. This book is comprised of seven chapters and begins with an introduction to the nature of the high-temperature vapor state, the scope and literature of high-temp

  17. Silicates materials of high vacuum technology

    CERN Document Server

    Espe, Werner

    2013-01-01

    Materials of High Vacuum Technology, Volume 2: Silicates covers silicate insulators of special importance to vacuum technology. The book discusses the manufacture, composition, and physical and chemical properties of technical glasses, quartz glass, quartzware, vycor glass, ceramic materials, mica, and asbestos.

  18. China's High-technology Standards Development

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    There are several major technology standards, including audio video coding (AVS), automotive electronics, third generation (3G) mobile phones, mobile television, wireless networks and digital terrestrial television broadcasting, that have been released or are currently under development in China. This article offers a detailed analysis of each standard and studies their impact on China's high-technology industry.

  19. MOOCs, High Technology, and Higher Learning

    Science.gov (United States)

    Rhoads, Robert A.

    2015-01-01

    In "MOOCs, High Technology, and Higher Learning," Robert A. Rhoads places the OpenCourseWare (OCW) movement into the larger context of a revolution in educational technology. In doing so, he seeks to bring greater balance to increasingly polarized discussions of massively open online courses (MOOCs) and show their ongoing relevance to…

  20. Production technology for actual fields in severe corrosive environments; Fushoku kankyo jitsu field jisshoka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Kaneda, H.; Ihara, K.; Wasada, N. [Tech. Research Center, Japan National Oil Corp., Tokyo (Japan)

    1995-11-10

    Tests and studies were started for the verification of the coated tubing developed using the element technology introduced in the special study `Production Technology in High-Temperature Corrosive Environments`, for the development of oil exploring equipment serviceable in corrosive environments, and for the development of programs for selecting materials for use in corrosive environments. In connection with verification tests, investigations were conducted into the operating fields of domestic oil exploring corporations and into technical literature relating to the deterioration of basic materials in their resistance to SSC, and basic data were accumulated. In the efforts to develop equipment, it was decided that drilling stabilizer blades be developed by plasma sintering, that information be collected concerning technologies relating to functionally gradient materials, and that technologies be developed for YAG-laser cladding of flange seal surfaces and elbow inner surfaces. As for the development of material selecting programs, various tests were conducted into the 13Cr steel and super 13Cr steel for their SSC, total corrosion, and local corrosion, their performance was evaluated, and the limit of their serviceability was determined by mathematical treatment. 7 figs., 3 tabs.

  1. Today's Training in the High Technology Arena

    Science.gov (United States)

    Baylis, William T.

    1995-01-01

    To keep in tune with the rapidly changing 'Hardware' technology, it is imperative that all of the supporting components of a program's efforts reflect these increases in technology. To maintain a work force that keeps in tune with the ever increasing technology base, training needs to remain a major consideration in all types of organizations. This paper focuses on the area of training and education and suggests a reasonable, cost effective alternative to carrying the entire burden of developing, training and maintaining a workforce in a rapidly changing, highly technological environment.

  2. Field analytical technology verification: The ETV Site Characterization Program

    Energy Technology Data Exchange (ETDEWEB)

    Einfeld, W. [Sandia National Labs., Albuquerque, NM (United States); Jenkins, R.A.; Dindal, A.B. [Oak Ridge National Lab., TN (United States)

    1998-06-01

    Innovative field characterization and monitoring technologies are often slow to be adopted by the environmental engineering/consulting community because of concerns that their performance has not been proven by an independent testing body, and/or they have not received the EPA`s blessing on a regional or national level. The purpose of the EPA Environmental Technology Verification (ETV) Site Characterization Pilot, a joint effort between EPA and DOE, is to accelerate the acceptance of technologies that reduce the cost and increase the speed of environmental clean-up and monitoring. Technology verifications that have been completed or are underway include: in situ technologies for the characterization of sub-surface hydrocarbon plumes, field-portable GC/MS systems, field-portable X-ray fluorescence analyzers, soil sampling technologies, field-portable PCB analyzers, analyzers for VOC analysis at the wellhead, and decision support software systems to aid site sample collection and contaminant plume definition. The verification process follows a somewhat generic pathway. A user-community need is identified, the vendor community is canvassed, and relevant, interested companies are selected. A demonstration plan is prepared by the verification organization and circulated to participants prior to the field activities. Field trials are normally held at two geologically or environmentally different sites and typically require one week at each site. Samples (soil, soil gas, water, surface wipe etc.) provided to the vendor at the demonstration include site-specific samples and standards or performance evaluation samples. Sample splits are sent to a pre-selected laboratory for analysis using a reference method. Laboratory data are used for comparison with field technology results during the data analysis phase of the demonstration.

  3. Marketing mix for consumer high technology products

    Directory of Open Access Journals (Sweden)

    Dovleac, L.

    2012-01-01

    Full Text Available This paper includes an analysis upon the variables of marketing mix for high technology products used for individual consumption. There are exposed the essential aspects related to marketing policies and strategies used by high technology companies for providing consumers the best solutions tailored to their needs. A special attention is given to the necessity for inclusion in the marketing mix of the fifth element – the assistance and informational support for customers.

  4. Dynamics of Gauge Fields at High Temperature

    NARCIS (Netherlands)

    Nauta, B.J.

    2000-01-01

    An effective description of dynamical Bose fields is provided by the classical (high-temperature) limit of thermal field theory. The main subject of this thesis is to improve the ensuing classical field theory, that is, to include the dominant quantum corrections and to add counter terms for the Ray

  5. Dynamics of Gauge Fields at High Temperature

    NARCIS (Netherlands)

    Nauta, B.J.

    2000-01-01

    An effective description of dynamical Bose fields is provided by the classical (high-temperature) limit of thermal field theory. The main subject of this thesis is to improve the ensuing classical field theory, that is, to include the dominant quantum corrections and to add counter terms for the Ray

  6. High Power Diode Lasers Technology and Applications

    CERN Document Server

    Bachmann, Friedrich; Poprawe, Reinhart

    2007-01-01

    In a very comprehensive way this book covers all aspects of high power diode laser technology for materials processing. Basics as well as new application oriented results obtained in a government funded national German research project are described in detail. Along the technological chain after a short introduction in the second chapter diode laser bar technology is discussed regarding structure, manufacturing technology and metrology. The third chapter illuminates all aspects of mounting and cooling, whereas chapter four gives wide spanning details on beam forming, beam guiding and beam combination, which are essential topics for incoherently coupled multi-emitter based high power diode lasers. Metrology, standards and safety aspects are the theme of chapter five. As an outcome of all the knowledge from chapter two to four various system configurations of high power diode lasers are described in chapter six; not only systems focussed on best available beam quality but especially also so called "modular" set...

  7. 高压脉冲电场技术在杨梅保鲜中的应用研究%Study on the application of high pulse electric field technology in preserving Myrica rubra fruits

    Institute of Scientific and Technical Information of China (English)

    张雯; 韩其国; 朱英俊; 郑兴华; 何晶; 刘珂舟; 杨勇

    2012-01-01

    高压脉冲电场灭菌技术是国际上研究较为热门的非热灭菌技术之一。实验目的是探讨高压脉冲电场技术用于杨梅保鲜的可行性。工作电压100kV的高压脉冲电场由本实验室研制,将新鲜杨梅置于高压脉冲电场产品处理室中,设置不同电场参数(脉宽、频率、电场作用时间)对杨梅进行处理,通过分析对照组和处理组杨梅的pH变化以及气味、色泽等感官指标的变化来验证高压脉冲电场对杨梅的保鲜效果。结果显示影响杨梅保鲜的最主要因素是电场脉冲宽度,最佳的参数组合是脉宽10μs,频率80Hz,作用时间10s。结论:高压脉冲电场对杨梅保鲜有一定的效果。%High pulse electric field(HPEF) is a highly developing non-thermal sterilization technique in recent years. The aim was to investigate the feasibility of HPEF technique on keeping Myrica rubra fruits fresh.Samples of Myrica rubra fruits were put in the HPEF operate chamber, and then processed by setting different electric field parameters.By analyzing the changes of pH value, and sensory indexes such as smell and colour between the control group and dealing groups,the effect of Myrica rubra preservation by high pulse electric field could be invistigated.Results showed that:there was significant difference in pH value between control group and dealing groups;among the parameters ( pulse width, frequency and effect time) ,the most influencing factor to keep Myrica rubra fruits fresh was the pulse width ;the optimal parameter combination was pulse width for 10μs with frequency for 80Hz, and effect time for 10s. The results indicated that it was feasible by using high pulse electric field technology to keep Myrica rubra fruits fresh.

  8. Challenges and Emerging Technologies within the Field of Pediatric Actigraphy.

    Science.gov (United States)

    Galland, Barbara; Meredith-Jones, Kim; Terrill, Philip; Taylor, Rachael

    2014-01-01

    Actigraphy as an objective measure of sleep and wakefulness in infants and children has gained popularity over the last 20 years. However, the field lacks published guidelines for sleep-wake identification within pediatric age groups. The scoring rules vary greatly and although sensitivity (sleep agreement with polysomnography) is usually high, a significant limitation remains in relation to specificity (wake agreement). Furthermore, accurate algorithm output and sleep-wake summaries usually require prior entry from daily logs of sleep-wake periods and artifact-related information (e.g., non-wear time), involving significant parent co-operation. Scoring criteria for daytime naps remains an unexplored area. Many of the problems facing accuracy of measurement are inherent within the field of actigraphy itself, particularly where sleep periods containing significant movements are erroneously classified as wake, and within quiet wakefulness when no movements are detected, erroneously classified as sleep. We discuss the challenges of actigraphy for pediatric sleep, briefly describe the technical basis and consider a number of technological approaches that may facilitate improved classification of errors in sleep-wake discrimination.

  9. Challenges and emerging technologies within the field of pediatric actigraphy

    Directory of Open Access Journals (Sweden)

    Barbara eGalland

    2014-08-01

    Full Text Available Actigraphy as an objective measure of sleep and wakefulness in infants and children has gained popularity over the last 20 years. However, the field lacks published guidelines for sleep-wake identification within pediatric age groups. The scoring rules vary greatly and although sensitivity (sleep agreement with polysomnography is usually high, a significant limitation remains in relation to specificity (wake agreement. Furthermore, accurate algorithm output and sleep-wake summaries usually require prior entry from daily logs of sleep–wake periods and artefact-related information (e.g. non-wear time, involving significant parent co-operation. Scoring criteria for daytime naps remains an unexplored area. Many of the problems facing accuracy of measurement are inherent within the field of actigraphy itself, particularly where sleep periods containing significant movements are erroneously classified as wake, and within quiet wakefulness when no movements are detected, erroneously classified as sleep. We discuss the challenges of actigraphy for pediatric sleep, briefly describe the technical basis and consider a number of technological approaches that may facilitate improved classification of errors in sleep-wake discrimination.

  10. Application of stereo-imaging technology to medical field.

    Science.gov (United States)

    Nam, Kyoung Won; Park, Jeongyun; Kim, In Young; Kim, Kwang Gi

    2012-09-01

    There has been continuous development in the area of stereoscopic medical imaging devices, and many stereoscopic imaging devices have been realized and applied in the medical field. In this article, we review past and current trends pertaining to the application stereo-imaging technologies in the medical field. We describe the basic principles of stereo vision and visual issues related to it, including visual discomfort, binocular disparities, vergence-accommodation mismatch, and visual fatigue. We also present a brief history of medical applications of stereo-imaging techniques, examples of recently developed stereoscopic medical devices, and patent application trends as they pertain to stereo-imaging medical devices. Three-dimensional (3D) stereo-imaging technology can provide more realistic depth perception to the viewer than conventional two-dimensional imaging technology. Therefore, it allows for a more accurate understanding and analysis of the morphology of an object. Based on these advantages, the significance of stereoscopic imaging in the medical field increases in accordance with the increase in the number of laparoscopic surgeries, and stereo-imaging technology plays a key role in the diagnoses of the detailed morphologies of small biological specimens. The application of 3D stereo-imaging technology to the medical field will help improve surgical accuracy, reduce operation times, and enhance patient safety. Therefore, it is important to develop more enhanced stereoscopic medical devices.

  11. Probing High Temperature Superconductors with Magnetometry in Ultrahigh Magnetic Fields

    Energy Technology Data Exchange (ETDEWEB)

    Li, Lu [Univ. of Michigan, Ann Arbor, MI (United States)

    2017-07-26

    The objective of this research is to investigate the high-field magnetic properties of high temperature superconductors, materials that conduct electricity without loss. A technique known as high-resolution torque magnetometry that was developed to directly measure the magnetization of high temperature superconductors. This technique was implemented using the 65 Tesla pulsed magnetic field facility that is part of the National High Magnetic Field Laboratory at Los Alamos National Laboratory. This research addressed unanswered questions about the interplay between magnetism and superconductivity, determine the electronic structure of high temperature superconductors, and shed light on the mechanism of high temperature superconductivity and on potential applications of these materials in areas such as energy generation and power transmission. Further applications of the technology resolve the novel physical phenomena such as correlated topological insulators, and spin liquid state in quantum magnets.

  12. Synchrotron Applications of High Magnetic Fields

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This workshop aims at discussing the scientific potential of X-ray diffraction and spectroscopy in magnetic fields above 30 T. Pulsed magnetic fields in the range of 30 to 40 T have recently become available at Spring-8 and the ESRF (European synchrotron radiation facility). This document gathers the transparencies of the 6 following presentations: 1) pulsed magnetic fields at ESRF: first results; 2) X-ray spectroscopy and diffraction experiments by using mini-coils: applications to valence state transition and frustrated magnet; 3) R{sub 5}(Si{sub x}Ge{sub 1-x}){sub 4}: an ideal system to be studied in X-ray under high magnetic field?; 4) high field studies at the Advanced Photon Source: present status and future plans; 5) synchrotron X-ray diffraction studies under extreme conditions; and 6) projects for pulsed and steady high magnetic fields at the ESRF.

  13. Vector Field Visual Data Analysis Technologies for Petascale Computational Science

    Energy Technology Data Exchange (ETDEWEB)

    Garth, Christoph; Deines, Eduard; Joy, Kenneth I.; Bethel, E. Wes; Childs, Hank; Weber, Gunther; Ahern, Sean; Pugmire, Dave; Sanderson, Allen; Johnson, Chris

    2009-11-13

    State-of-the-art computational science simulations generate large-scale vector field data sets. Visualization and analysis is a key aspect of obtaining insight into these data sets and represents an important challenge. This article discusses possibilities and challenges of modern vector field visualization and focuses on methods and techniques developed in the SciDAC Visualization and Analytics Center for Enabling Technologies (VACET) and deployed in the open-source visualization tool, VisIt.

  14. Field transportable beta spectrometer. Innovative technology summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    The objective of the Large-Scale Demonstration Project (LSDP) is to select and demonstrate potentially beneficial technologies at the Argonne National Laboratory-East (ANL) Chicago Pile-5 Test Reactor (CP-5). The purpose of the LSDP is to demonstrate that by using innovative and improved deactivation and decommissioning (D and D) technologies from various sources, significant benefits can be achieved when compared to baseline D and D technologies. One such capability being addressed by the D and D Focus Area is rapid characterization for facility contaminants. The technology was field demonstrated during the period January 7 through January 9, 1997, and offers several potential benefits, including faster turn-around time, cost reduction, and reduction in secondary waste. This report describes a PC controlled, field-transportable beta counter-spectrometer which uses solid scintillation coincident counting and low-noise photomultiplier tubes to count element-selective filters and other solid media. The dry scintillation counter used in combination with an element-selective technology eliminates the mess and disposal costs of liquid scintillation cocktails. Software in the instrument provides real-time spectral analysis. The instrument can detect and measure Tc-99, Sr-90, and other beta emitters reaching detection limits in the 20 pCi range (with shielding). Full analysis can be achieved in 30 minutes. The potential advantages of a field-portable beta counter-spectrometer include the savings gained from field generated results. The basis for decision-making is provided with a rapid turnaround analysis in the field. This technology would be competitive with the radiometric analysis done in fixed laboratories and the associated chain of custody operations.

  15. Optimizing brain tumor resection. High-field interventional MR imaging.

    Science.gov (United States)

    Tummala, R P; Chu, R M; Liu, H; Truwit, C L; Hall, W A

    2001-11-01

    High-field strength iMRI guidance is an effective tool for brain tumor resection. Although its use lengthens the average time for a craniotomy, the reward is a more extensive tumor excision compared with conventional neurosurgery without an increased risk to the patient (Table 4). Although intraoperative patient transfer into and out of the magnet is cumbersome, the possibility for complete resection, especially for a low-grade glioma, makes the effort worthwhile. The cost and technical support required for this system presently limits its use to only a few sites worldwide. As with any technology, further refinements will make this system less expensive and more attainable. Practical consideration aside, high-field strength iMRI is presently [table: see text] the most effective tool available for brain tumor resection. Because of its novelty, future studies are necessary to determine if this technology lowers the incidence of and extends the duration to tumor recurrence as the preliminary data in children suggests. These are the ultimate measures of efficacy for any brain tumor treatment. Based on the rapid advancement of technology, will today's high-field strength interventional magnet become tomorrow's low-field system? Very high-field strength designs may improve diagnostic capabilities through higher resolution, but their interventional applications may be hindered by increased sensitivity for clinically insignificant abnormalities and decreased specificity for clinically relevant lesions. As new technology is developed, clinicians must continue to explore and refine the existing high-field strength iMRI to make it cost-effective and widely applicable.

  16. Overview on the high power excimer laser technology

    Science.gov (United States)

    Liu, Jingru

    2013-05-01

    High power excimer laser has essential applications in the fields of high energy density physics, inertial fusion energy and industry owing to its advantages such as short wavelength, high gain, wide bandwidth, energy scalable and repetition operating ability. This overview is aimed at an introduction and evaluation of enormous endeavor of the international high power excimer laser community in the last 30 years. The main technologies of high power excimer laser are reviewed, which include the pumping source technology, angular multiplexing and pulse compressing, beam-smoothing and homogenous irradiation, high efficiency and repetitive operation et al. A high power XeCl laser system developed in NINT of China is described in detail.

  17. High-temperature superconductors in high-field magnets

    NARCIS (Netherlands)

    Weijers, Hubertus Wilhelmus

    2009-01-01

    The properties of both BSCCO conductors and YBCO coated conductors and coils are studied to assess their applicability in high-field magnets. First, the magnetic field dependence of the critical current density in these HTS conductors is measured at 4.2 K in magnetic field conditions ranging from s

  18. Application and prospect of computer technology in welding materials field

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    This paper summarizes the application status of computer technology in welding materials field from three aspects: the CAD of welding materials, the date base system for welding materials and the expert system for welding materials .Besides, this paper explores and discusses the existing problems and the developing trend in the future.

  19. SATELLITE GRAVITY SURVEYING TECHNOLOGY AND RESEARCH OF EARTH'S GRAVITY FIELD

    Institute of Scientific and Technical Information of China (English)

    Ning Jinsheng

    2003-01-01

    This is a summarized paper. Two topics are discussed: Firstly, the concept, development and application of four kinds of satellite gravity surveying technology are introduced; Secondly, some problems of theory and method, which must be considered in the study of the Earth's gravity field based on satellite gravity data, are expounded.

  20. Mapping the (R-)Evolution of Technological Fields

    DEFF Research Database (Denmark)

    Jurowetzki, Roman; Hain, Daniel S.

    2014-01-01

    The aim of this paper was to provide a framework and novel methodology geared towards mapping technological change in complex interdependent systems by using large amounts of unstructured data from various recent on- and offline sources. Combining techniques from the fields of natural language pr...

  1. High-G Gimbal Technology Studies

    Science.gov (United States)

    1979-07-01

    will verify the proposed High-G platform concept technology. 20 a -_ REFERENCES I. Invention Disclosure "High-G Gimbal Platform,* AMPC 37b6, 30 August...1977, Aubrey Rodgers. 2. Invention Disclosure "Snap-Lock Mechanism for High-G Gimbal Platform," AMPC 3831, 24 February 1978, Aubrey Rodgers. 3...Invention Disclosure "Rea.•tion Jet Torquer," AMPC 3832, 24 February 1978, Aubrey Rodgers and Eacar L. Bailey. 21 DISTRIBUTION No. of Copies Defense

  2. High-Field Superconducting Magnets Supporting PTOLEMY

    Science.gov (United States)

    Hopkins, Ann; Luo, Audrey; Osherson, Benjamin; Gentile, Charles; Tully, Chris; Cohen, Adam

    2013-10-01

    The Princeton Tritium Observatory for Light, Early Universe, Massive Neutrino Yield (PTOLEMY) is an experiment planned to collect data on Big Bang relic neutrinos, which are predicted to be amongst the oldest and smallest particles in the universe. Currently, a proof-of-principle prototype is being developed at Princeton Plasma Physics Laboratory to test key technologies associated with the experiment. A prominent technology in the experiment is the Magnetic Adiabatic Collimation with an Electrostatic Filter (MAC-E filter), which guides tritium betas along magnetic field lines generated by superconducting magnets while deflecting those of lower energies. B field mapping is performed to ensure the magnets produce a minimum field at the midpoint of the configuration of the magnets and to verify accuracy of existing models. Preliminary tests indicate the required rapid decrease in B field strength from the bore of the more powerful 3.35 T magnet, with the field dropping to 0.18 T approximately 0.5 feet from the outermost surface of the magnet.

  3. High-field bipolar loss measurement apparatus

    Science.gov (United States)

    Weldon, D.; Thullen, P.; Wollan, J.

    1980-09-01

    An apparatus was constructed to measure dissipation in superconducting wire in high alternating fields. The circuit incorporates a pair of locomotive traction motors as the capacitive circuit element for the bipolar swing. The design, construction and operating characteristics of the field coil and the associated circuitry are described.

  4. Application Fields of High-Temperature Superconductors

    OpenAIRE

    Hott, Roland

    2003-01-01

    Potential application fields for cuprate high-temperature superconductors (HTS) and the status of respective projects are reviewed. The availability of a reliable and inexpensive cooling technique will be essential for a future broad acceptance of HTS applications.

  5. Construction of high magnetic field facilities approved

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ On 25 January, the National Development and Reform Commission gave the green light to a proposal to construct high magnetic field facilities for experimental use. The suggestion was jointly submitted by the Ministry of Education and CAS.

  6. Inspection technology for high pressure pipes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae H.; Lee, Jae C.; Eum, Heung S.; Choi, Yu R.; Moon, Soon S.; Jang, Jong H

    2000-02-01

    Various kinds of defects are likely to be occurred in the welds of high pressure pipes in nuclear power plants. Considering the recent accident of Zuruga nuclear power plant in Japan, reasonable policy is strongly requested for the high pressure pipe integrity. In this study, we developed the technologies to inspect pipe welds automatically. After development of scanning robot prototype in the first research year, we developed and implemented the algorithm of automatic tracking of the scanning robot along the weld line of the pipes. We use laser slit beam on weld area and capture the image using digital camera. Through processing of the captures image, we finally determine the weld line automatically. In addition, we investigated a new technology on micro systems for developing micro scanning robotic inspection of the pipe welds. The technology developed in this study is being transferred to the industry. (author)

  7. Biological systems in high magnetic field

    Science.gov (United States)

    Yamagishi, A.

    1990-12-01

    Diamagnetic orientation of biological systems have been investigated theoretically and experimentally. Fibrinogen, one of blood proteins, were polymerized in static high magnetic fields up to 8 T. Clotted gels composed of oriented fibrin fibers were obtained even in a field as low as 1 T. Red blood cells (RBC) show full orientation with their plane parallel to the applied field of 4 T. It is confirmed experimentally that the magnetic orientation of RBC is caused by diamagnetic anisotropy. Full orientation is also obtained with blood platelet in a field of 3 T.

  8. Technology arising from High-Energy Physics

    CERN Multimedia

    1974-01-01

    An exibition was held as a part of the Meeting on Technology arising from High- Energy Physics (24-26 April 1974). The Proceedings (including a list of stands) were published as Yellow Report, CERN 74-9, vol. 1-2.

  9. Technology evaluation center assessment synopsis: full-field digital mammography.

    Science.gov (United States)

    Rothenberg, Barbara M; Ziegler, Kathleen M; Aronson, Naomi

    2006-08-01

    Full-field digital mammography (FFDM) is proposed as an alternative to screen-film mammography (SFM). The ability to separate and optimize the acquisition, storage, and display of images may allow greater visualization of breast cancers at equal or lower radiation doses, especially in younger women and those with denser breasts. This is a synopsis of a systematic review by the Blue Cross Blue Shield Association Technology Evaluation Center. This updated systematic review primarily incorporated the results of the ACR Imaging Network(R) Digital Mammographic Imaging Screening Trial (DMIST), which provided results on 42,760 asymptomatic women who underwent both FFDM and SFM and showed with reasonable certainty that there was no difference in the accuracy of the 2 modalities for asymptomatic women in general, with some advantages of FFDM in certain subgroups. There were no strong, new studies on the use of digital mammography compared with film mammography in a diagnostic population. However, the DMIST results indicated that tumors detected by FFDM, but not by SFM, were likely to be invasive carcinomas or medium-grade to high-grade ductal carcinoma in situ. On the basis of the suppositions that these are the cancers of greatest interest and the ones more likely to be found in a diagnostic population and that the diagnostic population may be younger on average than the screening population, it was concluded that there is sufficient evidence to support the use of FFDM for diagnostic purposes.

  10. Bringing Technology into college and High School Physics Classrooms

    Science.gov (United States)

    Zettili, Nouredine

    2007-04-01

    We want to present ideas on ways of bringing technology to college and high school physics classrooms. We focus in particular on our outreach initiative in supporting a number of school districts with ways to improve high school physics education. This initiative is part of Project IMPACTSEED (IMproving Physics And Chemistry Teaching in SEcondary Education), a No-Child Left Behind grant funded by the Alabama Commission on Higher Education. This project is motivated by a major local need: A large number of high school physics teachers teach out of field. IMPACTSEED aims at helping high school teachers learn and master the various physics topics required by the Alabama course of study. Teachers are offered year-round support through a rich variety of programs: a two-week long summer institute, a series of five technology workshops, and onsite year-round support. Through our hands-on approach, we have identified a number of ways of bringing technology into physics classrooms. A number of technology projects were assigned to the teachers so as to show their students how physics connects to the technological devices around us. IMPACTSEED aims at providing our students with a physics education that enjoys continuity and consistency from high school to college.

  11. Superconducting Magnet Technology for Future High Energy Proton Colliders

    Science.gov (United States)

    Gourlay, Stephen

    2017-01-01

    Interest in high field dipoles has been given a boost by new proposals to build a high-energy proton-proton collider to follow the LHC and programs around the world are taking on the task to answer the need. Studies aiming toward future high-energy proton-proton colliders at the 100 TeV scale are now being organized. The LHC and current cost models are based on technology close to four decades old and point to a broad optimum of operation using dipoles with fields between 5 and 12T when site constraints, either geographical or political, are not a factor. Site geography constraints that limit the ring circumference can drive the required dipole field up to 20T, which is more than a factor of two beyond state-of-the-art. After a brief review of current progress, the talk will describe the challenges facing future development and present a roadmap for moving high field accelerator magnet technology forward. This work was supported by the Director, Office of Science, High Energy Physics, US Department of Energy, under contract No. DE-AC02-05CH11231.

  12. High Spectral Density Optical Communication Technologies

    CERN Document Server

    Nakazawa, Masataka; Miyazaki, Tetsuya

    2010-01-01

    The latest hot topics of high-spectral density optical communication systems using digital coherent optical fibre communication technologies are covered by this book. History and meaning of a "renaissance" of the technology, requirements to the Peta-bit/s class "new generation network" are also covered in the first part of this book. The main topics treated are electronic and optical devices, digital signal processing including forward error correction, modulation formats as well as transmission and application systems. The book serves as a reference to researchers and engineers.

  13. High RF Magnetic Field Near-Field Microwave Microscope

    Science.gov (United States)

    Tai, Tamin; Mircea, Dragos I.; Anlage, Steven M.

    2010-03-01

    Near-field microwave microscopes have been developed to quantitatively image RF and microwave properties of a variety of materials on deep sub-wavelength scales [1]. Microscopes that develop high-RF magnetic fields on short length scales are useful for examining the fundamental electrodynamic properties of superconductors [2]. We are creating a new class of near-field microwave microscopes that develop RF fields on the scale of 1 Tesla on sub-micron length scales. These microscopes will be employed to investigate defects that limit the RF properties of bulk Nb materials used in accelerator cavities, and the nonlinear Meissner effect in novel superconductors. Work funded by the US Department of Energy. [1] S. M. Anlage, V. V. Talanov, A. R. Schwartz, ``Principles of Near-Field Microwave Microscopy,'' in Scanning Probe Microscopy: Electrical and Electromechanical Phenomena at the Nanoscale, Volume 1, edited by S. V. Kalinin and A. Gruverman (Springer-Verlag, New York, 2007), pp. 215-253. [2] D. I. Mircea, H. Xu, S. M. Anlage, ``Phase-sensitive Harmonic Measurements of Microwave Nonlinearities in Cuprate Thin Films,'' Phys. Rev. B 80, 144505 (2009).

  14. Background field coils for the High Field Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    Zbasnik, J.P.; Cornish, D.N.; Scanlan, R.M.; Jewell, A.M.; Leber, R.L.; Rosdahl, A.R.; Chaplin, M.R.

    1980-09-22

    The High Field Test Facility (HFTF), presently under construction at LLNL, is a set of superconducting coils that will be used to test 1-m-o.d. coils of prototype conductors for fusion magnets in fields up to 12 T. The facility consists of two concentric sets of coils; the outer set is a stack of Nb-Ti solenoids, and the inner set is a pair of solenoids made of cryogenically-stabilized, multifilamentary Nb/sub 3/Sn superconductor, developed for use in mirror-fusion magnets. The HFTF system is designed to be parted along the midplane to allow high-field conductors, under development for Tokamak fusion machines, to be inserted and tested. The background field coils were wound pancake-fashion, with cold-welded joints at both the inner and outer diameters. Turn-to-turn insulation was fabricated at LLNL from epoxy-fiberglass strip. The coils were assembled and tested in our 2-m-diam cryostat to verify their operation.

  15. Alternative high-resolution lithographic technologies for optical applications

    Science.gov (United States)

    Zeitner, Uwe D.; Weichelt, Tina; Bourgin, Yannick; Kinder, Robert

    2016-03-01

    Modern optical applications have special demands on the lithographic fabrication technologies. This relates to the lateral shape of the structures as well as to their three dimensional surface profile. On the other hand optical nano-structures are often periodic which allows for the use of dedicated lithographic exposure principles. The paper briefly reviews actual developments in the field of optical nano-structure generation. Special emphasis will be given to two technologies: electron-beam lithography based on a flexible cell-projection method and the actual developments in diffractive mask aligner lithography. Both offer a cost effective fabrication alternative for high resolution structures or three-dimensional optical surface profiles.

  16. Technology Development for High Efficiency Optical Communications

    Science.gov (United States)

    Farr, William H.

    2012-01-01

    Deep space optical communications is a significantly more challenging operational domain than near Earth space optical communications, primarily due to effects resulting from the vastly increased range between transmitter and receiver. The NASA Game Changing Development Program Deep Space Optical Communications Project is developing four key technologies for the implementation of a high efficiency telecommunications system that will enable greater than 10X the data rate of a state-of-the-art deep space RF system (Ka-band) for similar transceiver mass and power burden on the spacecraft. These technologies are a low mass spacecraft disturbance isolation assembly, a flight qualified photon counting detector array, a high efficiency flight laser amplifier and a high efficiency photon counting detector array for the ground-based receiver.

  17. Evaluation of environmental control technologies for magnetic fields

    Energy Technology Data Exchange (ETDEWEB)

    1978-08-01

    The peripheral magnetic fields of several energy-related technologies are calculated, and shielding options are studied for three field intensities as possible exposure levels: 200 G, 10 G, and 0.3 G. Seven fusion reactor designs are studied. For a 200-G field level, shielding is not required. For the 10- and 0.3-G levels, land is the most economical shielding method, with shield coils an acceptable alternative at 0.3 G. Nonnuclear technologies studied are superconducting magnetic energy storage, magnetohydrodynamic (MHD) electric generators, magnetically levitated vehicles, superconducting ac generators, and underground transmission lines. Superconducting ac generators and underground transmission lines require no shielding. The superconducting magnetic energy storage coil requires no shielding for 200 G. Both a shield coil and land are needed to meet 10 G or 0.3 G. The MHD generator needs no shielding to 200 G and 10 G. Land is the most economical means of meeting the 0.3 G level. Most of the magnetically levitated vehicles require no shielding to 200 G. The field on-board can be reduced from 200 to 25 G, depending upon the vehicle design, with shield coils. The use of iron, or another permeable material, is necessary to reduce the field to 10 G or 0.3 G. However, iron introduces too much added weight to allow efficient operation.

  18. Comparison of Temperature Field Distribution between Cement Preclinkering Technology and Cement Precalcining Technology

    Institute of Scientific and Technical Information of China (English)

    XU Xun; WANG Lan

    2016-01-01

    Through the comparison of calcination conditions between cement preclinkering technology and cement precalcining technology, we studied the characteristics of temperature ifeld distribution of cement preclinkering technology systems including cyclone preheater, preclinkering furnace, and rotary kiln. We used numerical simulation method to obtain data of temperature ifeld distribution.Some results are found by system study. The ratio of tail coal of cement preclinkering technology is about 70%, and raw meal temperature can reach 1070℃. ShorterL/D kiln type of preclinkering technology can obtain more stable calcining zone temperature. The highest solid temperature of cement preclinkering technology is higher than 80℃, and high temperature region (>1450℃) length is 2 times, which is beneifcial for calcining clinker and higher clinker quality. So cement preclinkering technology can obtain more performance temperature ifled, which improves both the solid-phase reaction and liquid-phase reaction.

  19. Magnetic fields during high redshift structure formation

    CERN Document Server

    Schleicher, Dominik R G; Schober, Jennifer; Schmidt, Wolfram; Bovino, Stefano; Federrath, Christoph; Niemeyer, Jens; Banerjee, Robi; Klessen, Ralf S

    2012-01-01

    We explore the amplification of magnetic fields in the high-redshift Universe. For this purpose, we perform high-resolution cosmological simulations following the formation of primordial halos with \\sim10^7 M_solar, revealing the presence of turbulent structures and complex morphologies at resolutions of at least 32 cells per Jeans length. Employing a turbulence subgrid-scale model, we quantify the amount of unresolved turbulence and show that the resulting turbulent viscosity has a significant impact on the gas morphology, suppressing the formation of low-mass clumps. We further demonstrate that such turbulence implies the efficient amplification of magnetic fields via the small-scale dynamo. We discuss the properties of the dynamo in the kinematic and non-linear regime, and explore the resulting magnetic field amplification during primordial star formation. We show that field strengths of \\sim10^{-5} G can be expected at number densities of \\sim5 cm^{-3}.

  20. Molecular dynamics in high electric fields

    Science.gov (United States)

    Apostol, M.; Cune, L. C.

    2016-06-01

    Molecular rotation spectra, generated by the coupling of the molecular electric-dipole moments to an external time-dependent electric field, are discussed in a few particular conditions which can be of some experimental interest. First, the spherical-pendulum molecular model is reviewed, with the aim of introducing an approximate method which consists in the separation of the azimuthal and zenithal motions. Second, rotation spectra are considered in the presence of a static electric field. Two particular cases are analyzed, corresponding to strong and weak fields. In both cases the classical motion of the dipoles consists of rotations and vibrations about equilibrium positions; this motion may exhibit parametric resonances. For strong fields a large macroscopic electric polarization may appear. This situation may be relevant for polar matter (like pyroelectrics, ferroelectrics), or for heavy impurities embedded in a polar solid. The dipolar interaction is analyzed in polar condensed matter, where it is shown that new polarization modes appear for a spontaneous macroscopic electric polarization (these modes are tentatively called "dipolons"); one of the polarization modes is related to parametric resonances. The extension of these considerations to magnetic dipoles is briefly discussed. The treatment is extended to strong electric fields which oscillate with a high frequency, as those provided by high-power lasers. It is shown that the effect of such fields on molecular dynamics is governed by a much weaker, effective, renormalized, static electric field.

  1. High-field dipoles for future accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Wipf, S.L.

    1984-09-01

    This report presents the concept for building superconducting accelerator dipoles with record high fields. Economic considerations favor the highest possible current density in the windings. Further discussion indicates that there is an optimal range of pinning strength for a superconducting material and that it is not likely for multifilamentary conductors to ever equal the potential performance of tape conductors. A dipole design with a tape-wound, inner high-field winding is suggested. Methods are detailed to avoid degradation caused by flux jumps and to overcome problems with the dipole ends. Concerns for force support structure and field precision are also addressed. An R and D program leading to a prototype 11-T dipole is outlined. Past and future importance of superconductivity to high-energy physics is evident from a short historical survey. Successful dipoles in the 10- to 20-T range will allow interesting options for upgrading present largest accelerators.

  2. Developing the Principal Technology Leadership Competency Indicators for Technical High Schools in K-12 in Taiwan

    Science.gov (United States)

    Shyr, Wen-Jye

    2017-01-01

    The purpose of this study was to develop principal technology leadership competency indicators for technical high schools in K-12 in Taiwan in order to improve the effectiveness of school administration and teaching. In the first part of the study, five experts in the technology leadership field are interviewed to explore the technology leadership…

  3. Technology development for high power induction accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Birx, D.L.; Reginato, L.L.

    1985-06-11

    The marriage of Induction Linac technology with Nonlinear Magnetic Modulators has produced some unique capabilities. It appears possible to produce electron beams with average currents measured in amperes, at gradients exceeding 1 MeV/meter, and with power efficiencies approaching 50%. A 2 MeV, 5 kA electron accelerator has been constructed at the Lawrence Livermore National Laboratory (LLNL) to demonstrate these concepts and to provide a test facility for high brightness sources. The pulse drive for the accelerator is based on state-of-the-art magnetic pulse compressors with very high peak power capability, repetition rates exceeding a kilohertz and excellent reliability.

  4. Utilizing Geo-Referenced Mobile Game Technology for Universally Accessible Virtual Geology Field Trips

    Science.gov (United States)

    Bursztyn, Natalie; Pederson, Joel; Shelton, Brett; Walker, Andrew; Campbell, Todd

    2015-01-01

    Declining interest and low persistence is well documented among undergraduate students in Science, Technology, Engineering, and Math in the United States. For geoscience, field trips are important attractors to students, however with high enrollment courses and increasing costs they are becoming rare. We propose in this concept paper that the…

  5. High-field bipolar loss measurement apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Thullen, P.; Weldon, D.; Wollan, J.

    1980-01-01

    An apparatus was constructed to measure dissipation in superconducting wire in high alternating fields. The apparatus will be used to make measurements on conductors which must operate in fields up to 7.0 T and rates of field change up to 15 T/s. The magnet for this facility is wound of uninsulated, 15 strand Rutherford cable in which the strand is a 0.812 mm diameter, fully mixed matrix, Cu plus CuNi, multifilament NbTi conductor. The coil is wound in a bath cooled configuration with an overall current density of 7.8 kA/cm/sup 2/. The circuit incorporates a pair of locomotive traction motors as the capacitive circuit element for the bipolar swing. The design, construction and operating characteristics of the field coil and the associated circuitry are described.

  6. On China's High-Speed Railway Technology

    Institute of Scientific and Technical Information of China (English)

    You-tong FANG

    2011-01-01

    Energy and environmental issues have become increasingly prominent in matters of transportation.Compared with road,air,and sea transportation,railway transportation has the advantages of a large transmission capacity,with rapid,safe,and on-time travel,requiring less land resources,with lower energy consumption,less environmental pollution,and the capacity to operate under most weather conditions.In particular,high-speed railway technology has been growing rapidly.Since the world's first high-speed railway was built in Japan in 1964,more than ten countries and regions have developed high-speed railways,operating over a total of more than 10000 km.High-speed railways not only provide the public with a new type of rapid,convenient,safe,and comfortable travel,but also greatly boost the socio-economic development of the country.

  7. High-intensity, focused ultrasonic fields

    DEFF Research Database (Denmark)

    Jensen, Leif Bjørnø

    1988-01-01

    distribution, etc. involving nonlinearity, diffraction, and absorption in the high-intensity focused ultrasonic fields produced by an ellipsoid as well as a spherical cap focusing geometry. Data from the development of an ESWL of the piezoelectric disk type are reported including demands to transducers...

  8. Physics of semiconductors in high magnetic fields

    CERN Document Server

    Miura, Noboru

    2008-01-01

    This book summarizes most of the fundamental physical phenomena which semiconductors and their modulated structures exhibit in high magnetic fields. Readers can learn not only the basic theoretical background but also the present state of the art from the most advanced data in this rapidly growing research area.

  9. Technological learning through international collaboration: Lessons from the field

    Science.gov (United States)

    Wood, Danielle; Weigel, Annalisa

    2013-02-01

    Countries on every continent are making new or renewed commitments to domestic satellite programs. These programs have the potential to address national needs by enhancing access to information, improving infrastructure and providing inspiration to the public. How do countries without local expertise in space technology begin a new satellite program? What is the role of international collaboration in supporting the efforts of a new space fairing country? This paper explores such questions by highlighting outputs from intensive field work in Africa and Asia. Specifically, the study explores case studies of early space activity in these countries to search for lessons about the management of a young space program. The observations from field work are compared to ideas from scholarly literature on technological learning. The findings are organized using principles from systems architecture. The paper presents a model that captures many of the influences and strategic decision areas for a collaborative satellite development project. The paper also highlights the growth of capability among African countries in the area of satellite technology.

  10. The Savannah River Technology Center environmental monitoring field test platform

    Energy Technology Data Exchange (ETDEWEB)

    Rossabi, J.

    1993-03-05

    Nearly all industrial facilities have been responsible for introducing synthetic chemicals into the environment. The Savannah River Site is no exception. Several areas at the site have been contaminated by chlorinated volatile organic chemicals. Because of the persistence and refractory nature of these contaminants, a complete clean up of the site will take many years. A major focus of the mission of the Environmental Sciences Section of the Savannah River Technology Center is to develop better, faster, and less expensive methods for characterizing, monitoring, and remediating the subsurface. These new methods can then be applied directly at the Savannah River Site and at other contaminated areas in the United States and throughout the world. The Environmental Sciences Section has hosted field testing of many different monitoring technologies over the past two years primarily as a result of the Integrated Demonstration Program sponsored by the Department of Energy`s Office of Technology Development. This paper provides an overview of some of the technologies that have been demonstrated at the site and briefly discusses the applicability of these techniques.

  11. Derivation of the high field semiconductor equations

    Energy Technology Data Exchange (ETDEWEB)

    Hagan, P.S. (Los Alamos National Lab., NM (United States)); Cox, R.W. (Department of Computer Information Science, Indiana University, Purdue University, Indianapolis (USA)); Wagner, B.A. (Arizona Univ., Tucson, AZ (United States). Dept. of Mathematics)

    1991-01-01

    Electron and hole densities evolve in x-z phase space according to Boltzmann equations. When the mean free path of the particles is short and electric force on the particles is weak, a well-known expansion can be used to solve the Boltzmann equation. This asymptotic solution shows that the spatial density of electrons and holes evolves according to diffusion-drift equations. As devices become smaller, electric fields become stronger, which renders the Basic Semiconductor Equations increasingly inaccurate. To remedy this problem, we use singular perturbation techniques to obtain a new asymptotic expansion for the Boltzmann equation. Like the Hilbert expansion, the new expansion requires the mean free path to be short compared to all macroscopic length scales. However, it does not require the electric forces to be weak. The new expansion shows that spatial densities obey diffusion-drift equations as before, but the diffusivity D and mobility {mu} turn out to be nonlinear functions of the electric field. In particular, our analysis determines the field-dependent mobilities {mu}(E) and diffusivities D(E) directly from the scattering operator. By carrying out this asymptotic expansion to higher order, we obtain the high frequency corrections to the drift velocity and diffusivity, and also the corrections due to gradients in the electric field. Remarkably, we find that Einsteins's relation is still satisfied, even with these corrections. The new diffusion-drift equations, together with Poissons' equation for the electric field, form the high-field semiconductor equations, which can be expected to be accurate regardless of the strength of the electric fields within the semiconductor. In addition, our analysis determines the entire momentum distribution of the particles, so we derive a very accurate first moment model for semi-conductors by substituting the asymptotically-correct distribution back into the Boltzmann equation and taking moments.

  12. Study of Near Field Communication Technology in University Scenarios

    Science.gov (United States)

    Ruiz, Irene Luque; Miraz, Guillermo Matas; Gómez-Nieto, Miguel Ángel

    2009-08-01

    In this paper we present an introduction to the possibilities of NFC (Near Field Communication) technology in the University environment. NFC is the key for the development of interactive systems where "intelligent" objects interact with the user just only by touching the objects with a NFC device. We support that a University environment with active objects dispatching information and services to the users (students and teachers) can introduce an appropriate environment for the fulfillment of the new Educational European directives. Here, we briefly describe some of the possibilities of the NFC technology and we include an example of the use of NFC through a Smart Poster for a scenario where a Department directory is considered.

  13. Utilization of Near Field Communication Technology for Loyalty Management

    Directory of Open Access Journals (Sweden)

    Ferina Ferdianti

    2013-09-01

    Full Text Available Near Field Communication (NFC is one of wireless technology developed at this time. We can use a mobile phone to do many transactions with NFC. Mobile developments have created to provide convenience for users in all aspects. However, at this time the function of NFC just limited for payment and micropayment. Beside it, there are assets that support to increase sales with attention of loyality management system. In this system, discounts or prizes are given based on data mining for every transaction costumers. Loyalty management has three concept, those are Frequency, Recency and Quantity. The goals are minimizing the cost, making purchase process faster, and managing data obtained through the NFC technology more simple. The result of this paper is the procedure to use data mining of NFC for loyalty management and system design using Unified Modeling Language approach.

  14. Stream conversion technology and gas condensate field development

    Energy Technology Data Exchange (ETDEWEB)

    Kuntadi, Arif

    2012-07-01

    In the last few years, integrated modeling has become a preferred tool in the petroleum industry to manage the value chain of different assets. It is slowly replacing the traditional modeling approach that treats each petroleum asset model separately. Having different discipline models and applications in a single platform will ensure more consistency of the value chain from one asset to another. Integrated modeling also enables engineers to optimize assets, both locally and globally, using an automatic approach. Coupling of different petroleum assets entails transferring and combining petroleum streams from one asset to the others. Stream conversion is a key requirement in integrated modeling because petroleum assets usually have their own fluid model, and it is rare to have a single common fluid model in both the subsurface and surface simulation models. This thesis investigates different stream conversion methods and provides important technologies for integrating different petroleum assets into an integrated asset model. These stream conversions are expected to have highly accurate results and reduce the computational time. Reservoir engineers have utilized both compositional and black-oil reservoir simulations for many years. Due to the CPU-time consideration, the EOS model used in a compositional simulation is normally limited to 6-10 components, a so-called lumped EOS model. We propose a delumping method to generate detailed compositional streams from either black-oil or compositional (lumped-EOS) reservoir simulations, performed as a simple post-processing step. These methods are based on a set of phase-specific and pressure-dependent split factors. The reservoir simulation phase behavior can be approximated by a PVT depletion experiment, such as the CCE depletion experiment. We have used this approach to develop the blackoil and compositional delumping method applied to the reservoir simulation output. The split factors are generated from simulated

  15. Technologies for the exploration of highly mineralized geothermal resources

    Science.gov (United States)

    Alkhasov, A. B.; Alkhasova, D. A.; Ramazanov, A. Sh.; Kasparova, M. A.

    2017-09-01

    The prospects of the integrated processing of the high-parameter geothermal resources of the East Ciscaucasia of artesian basin (ECAB) with the conversion of their heat energy into electric energy at a binary geoPP and the subsequent extraction of solved chemical compounds from thermal waters are evaluated. The most promising areas for the exploration such resources are overviewed. The integrated exploration of hightemperature hydrogeothermal brines is a new trend in geothermal power engineering, which can make it possible to significantly increase the production volume of hydrogeothermal resources and develop the geothermal field at a higher level with the realization of the energy-efficient advanced technologies. The large-scale exploration of brines can solve the regional problems of energy supply and import substitution and fulfill the need of Russia in food and technical salt and rare elements. The necessity of the primary integrated exploration of the oil-field highly mineralized brines of the South Sukhokumskii group of gas-oil wells of Northern Dagestan was shown in view of the exacerbated environmental problems. Currently, the oil-field brines with the radioactive background exceeding the allowable levels are discharged at disposal fields. The technological solutions for their deactivation and integrated exploration are proposed. The realization of the proposed technological solutions provides 300 t of lithium carbonate, 1650 t of caustic magnesite powder, 27300 t of chemically precipitated chalk, 116100 t of food salt, and up to 1.4 mln m3 of desalinated water from oil-field brines yearly. Desalinated water at the output of a geotechnological complex can be used for different economic needs, which is important for the arid North Caucasus region, where the fresh water deficiency is acute, especially in its plain part within the ECAB.

  16. Wuhan pulsed high magnetic field center

    OpenAIRE

    Li, Liang; Peng, Tao; Ding, Honfa; Han, Xiaotao; Ding, Tonghai; Chen, Jin; Wang, Junfeng; Xie, Jianfeng; Wang, Shaoliang; Duan, Xianzhong; Wang, Cheng; Herlach, Fritz; Vanacken, Johan; Pan, Yuan

    2008-01-01

    Wuhan pulsed high magnetic field facility is under development. Magnets of bore sizes from 12 to 34 mm with the peak field in the range of 50 to 80 T have been designed. The pulsed power supplies consists of a 12 MJ, 25 kV capacitor bank and a 100 MVA/100 MJ flywheel pulse generator. A prototype 1 MJ, 25 kV capacitor bank is under construction. Five magnets wound with CuNb wire and copper wire reinforced internally with Zylon fiber composites and externally with stainless steel shells have be...

  17. Wuhan pulsed high magnetic field center

    OpenAIRE

    Li, Liang; Peng, Tao; Ding, Honfa; Han, Xiaotao; Ding, Tonghai; Chen, Jin; Wang, Junfeng; Xie, Jianfeng; Wang, Shaoliang; DUAN, Xianzhong; Wang, Cheng; Herlach, Fritz; Vanacken, Johan; Pan, Yuan

    2008-01-01

    Wuhan pulsed high magnetic field facility is under development. Magnets of bore sizes from 12 to 34 mm with the peak field in the range of 50 to 80 T have been designed. The pulsed power supplies consists of a 12 MJ, 25 kV capacitor bank and a 100 MVA/100 MJ flywheel pulse generator. A prototype 1 MJ, 25 kV capacitor bank is under construction. Five magnets wound with CuNb wire and copper wire reinforced internally with Zylon fiber composites and externally with stainless steel shells have be...

  18. Taming Dynamical Complexity and Managing High Technology

    Institute of Scientific and Technical Information of China (English)

    FANGJin-qing; CHENGuan-rong; ZHAOGeng

    2003-01-01

    Variability is one of the most important features of complexity m complex networks anu systems,which usually depends sensitively on small perturbations. Various possible competing behaviours in a system may provide great flexibility in regulating or taming dynamical complexity, through which the designer may be able to better select and manage a desired behaviour for a specific application. In many high-tech fields, how to regulate or manage complexity is a very important but challenge issue.

  19. Homogenous BSCCO-2212 Round Wires for Very High Field Magnets

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Scott Campbell

    2012-06-30

    The performance demands on modern particle accelerators generate a relentless push towards higher field magnets. In turn, advanced high field magnet development places increased demands on superconducting materials. Nb3Sn conductors have been used to achieve 16 T in a prototype dipole magnet and are thought to have the capability for {approx}18 T for accelerator magnets (primarily dipoles but also higher order multipole magnets). However there have been suggestions and proposals for such magnets higher than 20 T. The High Energy Physics Community (HEP) has identified important new physics opportunities that are enabled by extremely high field magnets: 20 to 50 T solenoids for muon cooling in a muon collider (impact: understanding of neutrinos and dark matter); and 20+ T dipoles and quadrupoles for high energy hadron colliders (impact: discovery reach far beyond present). This proposal addresses the latest SBIR solicitation that calls for grant applications that seek to develop new or improved superconducting wire technologies for magnets that operate at a minimum of 12 Tesla (T) field, with increases up to 15 to 20 T sought in the near future (three to five years). The long-term development of accelerator magnets with fields greater than 20 T will require superconducting wires having significantly better high-field properties than those possessed by current Nb{sub 3}Sn or other A15 based wires. Given the existing materials science base for Bi-2212 wire processing, we believe that Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub y} (Bi-2212) round wires can be produced in km-long piece lengths with properties suitable to meet both the near term and long term needs of the HEP community. The key advance will be the translation of this materials science base into a robust, high-yield wire technology. While the processing and application of A15 materials have advanced to a much higher level than those of the copper oxide-based, high T{sub c} (HTS) counterparts, the HTS materials have

  20. Continuous High Technology Business Incubation : cross-sectoral comparison of approaches to high technology business incubation

    NARCIS (Netherlands)

    Davey, Todd; Kliewe, Thorsten; Sijde, van der Peter; McIntyre, Matt

    2008-01-01

    This paper addresses the question of how organisations can foster high technology businesses in an incubation-type environment. We compare the approaches taken by a large private firm with a successful University entrepreneurial program to outline successful elements in creating a successful high te

  1. High-transconductance graphene solution-gated field effect transistors

    Science.gov (United States)

    Hess, L. H.; Hauf, M. V.; Seifert, M.; Speck, F.; Seyller, T.; Stutzmann, M.; Sharp, I. D.; Garrido, J. A.

    2011-07-01

    In this work, we report on the electronic properties of solution-gated field effect transistors (SGFETs) fabricated using large-area graphene. Devices prepared both with epitaxially grown graphene on SiC as well as with chemical vapor deposition grown graphene on Cu exhibit high transconductances, which are a consequence of the high mobility of charge carriers in graphene and the large capacitance at the graphene/water interface. The performance of graphene SGFETs, in terms of gate sensitivity, is compared to other SGFET technologies and found to be clearly superior, confirming the potential of graphene SGFETs for sensing applications in electrolytic environments.

  2. Experiences of using mobile technologies and virtual field tours in Physical Geography: implications for hydrology education

    Science.gov (United States)

    Kingston, D. G.; Eastwood, W. J.; Jones, P. I.; Johnson, R.; Marshall, S.; Hannah, D. M.

    2012-05-01

    Education in hydrology is changing rapidly due to diversification of students, emergent major scientific and practical challenges that our discipline must engage with, shifting pedagogic ideas and higher education environments, the need for students to develop new discipline specific and transferrable skills, and the advent of innovative technologies for learning and teaching. This paper focuses on new technologies in the context of learning and teaching in Physical Geography and reflects on the implications of our experiences for education in hydrology. We evaluate the experience of designing and trialling novel mobile technology-based field exercises and a virtual field tour for a Year 1 undergraduate Physical Geography module at a UK university. The new exercises are based on using and obtaining spatial data, operation of meteorological equipment (explained using an interactive DVD), and include introductions to global positioning systems (GPS) and geographical information systems (GIS). The technology and exercises were well received in a pilot study and subsequent rolling-out to the full student cohort (∼150 students). A statistically significant improvement in marks was observed following the redesign. Although the students enjoyed using mobile technology, the increased interactivity and opportunity for peer learning were considered to be the primary benefits by students. This is reinforced further by student preference for the new interactive virtual field tour over the previous "show-and-tell" field exercise. Despite the new exercises having many advantages, exercise development was not trivial due to the high start-up costs, the need for provision of sufficient technical support and the relative difficulty of making year-to-year changes (to the virtual field tour in particular). Our experiences are highly relevant to the implementation of novel learning and teaching technologies in hydrology education.

  3. Experiences of using mobile technologies and virtual field tours in Physical Geography: implications for hydrology education

    Directory of Open Access Journals (Sweden)

    D. G. Kingston

    2012-05-01

    Full Text Available Education in hydrology is changing rapidly due to diversification of students, emergent major scientific and practical challenges that our discipline must engage with, shifting pedagogic ideas and higher education environments, the need for students to develop new discipline specific and transferrable skills, and the advent of innovative technologies for learning and teaching. This paper focuses on new technologies in the context of learning and teaching in Physical Geography and reflects on the implications of our experiences for education in hydrology. We evaluate the experience of designing and trialling novel mobile technology-based field exercises and a virtual field tour for a Year 1 undergraduate Physical Geography module at a UK university. The new exercises are based on using and obtaining spatial data, operation of meteorological equipment (explained using an interactive DVD, and include introductions to global positioning systems (GPS and geographical information systems (GIS. The technology and exercises were well received in a pilot study and subsequent rolling-out to the full student cohort (∼150 students. A statistically significant improvement in marks was observed following the redesign. Although the students enjoyed using mobile technology, the increased interactivity and opportunity for peer learning were considered to be the primary benefits by students. This is reinforced further by student preference for the new interactive virtual field tour over the previous "show-and-tell" field exercise. Despite the new exercises having many advantages, exercise development was not trivial due to the high start-up costs, the need for provision of sufficient technical support and the relative difficulty of making year-to-year changes (to the virtual field tour in particular. Our experiences are highly relevant to the implementation of novel learning and teaching technologies in hydrology education.

  4. Applications of high dielectric materials in high field magnetic resonance

    Science.gov (United States)

    Haines, Kristina Noel

    At high magnetic fields, radiation losses, wavelength effects, self-resonance, and the high resistance of components all contribute to losses in conventional RF MRI coil designs. The hypothesis tested here is that these problems can be combated by the use of high permittivity ceramic materials at high fields. High permittivity ceramic dielectric resonators create strong uniform magnetic fields in compact structures at high frequencies and can potentially solve some of the challenges of high field coil design. In this study NMR probes were constructed for operation at 600 MHz (14.1 Tesla) and 900 MHz (21.1 Tesla) using inductively fed CaTiO3 (relative permittivity of 156-166) cylindrical hollow bore dielectric resonators. The designs showed the electric field is largely confined to the dielectric itself, with near zero values in the hollow bore, which accommodates the sample. The 600 MHz probe has an unmatched Q value greater than 2000. Experimental and simulation mapping of the RF field show good agreement, with the ceramic resonator giving a pulse width approximately 25% less than a loop gap resonator of similar inner dimensions. High resolution images, with voxel dimensions less than 50 microm3, have been acquired from fixed zebrafish samples, showing excellent delineation of several fine structures. The 900 MHz probe has an unmatched Q value of 940 and shows Q performance five times better than Alderman-Grant and loop-gap resonators of similar dimensions. High resolution images were acquired of an excised mouse spinal cord (25 microm 3) and an excised rat soleus muscle (20 microm3). The spatial distribution of electromagnetic fields within the human body can be tailored using external dielectric materials. Here, a new material is introduced with high dielectric constant and low background MRI signal. The material is based upon metal titanates, which can be made into geometrically formable suspensions in de-ionized water. The suspension's material properties are

  5. High Field Pulse Magnets with New Materials

    Science.gov (United States)

    Li, L.; Lesch, B.; Cochran, V. G.; Eyssa, Y.; Tozer, S.; Mielke, C. H.; Rickel, D.; van Sciver, S. W.; Schneider-Muntau, H. J.

    2004-11-01

    High performance pulse magnets using the combination of CuNb conductor and Zylon fiber composite reinforcement with bore sizes of 24, 15 and 10 mm have been designed, manufactured and tested to destruction. The magnets successfully reached the peak fields of 64, 70 and 77.8 T respectively with no destruction. Failures occurred near the end flanges at the layer. The magnet design, manufacturing and testing, and the mode of the failure are described and analyzed.

  6. [Application of advanced engineering technologies to medical and rehabilitation fields].

    Science.gov (United States)

    Fujie, Masakatsu

    2012-07-01

    The words "Japan syndrome" can now be heard increasingly through the media. Facing the approach of an elderly-dominated society, Robot Technology(RT)is expected to play an important role in Japan's medical, rehabilitation, and daily support fields. The industrial robot, which has already spread through the world with a great success in certain isolated environments by doing the work which is specialized for the thing with the hard known characteristic. By comparison, in the medical and rehabilitation fields, environments always change intricately, and individual characteristics differ from person to person. Furthermore, there are many times when a robot will be asked to directly interact with people. Moreover, the relation between a robot and a person turns into a relation which should involve contact flexibly according to a situation, and also turns into a relation which should avoid contact. In our group, we have so far developed practical rehabilitation and medical robots which can respond to difficulties such as environmental change and individual specificity. In developing rehabilitation robots, it is especially important to consider intuitive operability and individual differences. In addition, in developing medical robots, it is important to replace the experimental knowledge of surgeons to the mechanical quantitative properties. In this article, we introduce some practical examples of rehabilitation and medical robots interweaving several detailed technologies we have so far developed.

  7. High field superconductor development and understanding

    Energy Technology Data Exchange (ETDEWEB)

    Larbalestier, David C. [Florida State Univ., Tallahassee, FL (United States); Lee, Peter J. [Florida State Univ., Tallahassee, FL (United States); Tarantini, Chiara [Florida State Univ., Tallahassee, FL (United States)

    2014-09-28

    All present circular accelerators use superconducting magnets to bend and to focus the particle beams. The most powerful of these machines is the large hadron collider (LHC) at CERN. The main ring dipole magnets of the LHC are made from Nb-Ti but, as the machine is upgraded to higher luminosity, more powerful magnets made of Nb3Sn will be required. Our work addresses how to make the Nb3Sn conductors more effective and more suitable for use in the LHC. The most important property of the superconducting conductor used for an accelerator magnet is that it must have very high critical current density, the property that allows the generation of high magnetic fields in small spaces. Nb3Sn is the original high field superconductor, the material which was discovered in 1960 to allow a high current density in the field of about 9 T. For the high luminosity upgrade of the LHC, much higher current densities in fields of about 12 Tesla will be required. The critical value of the current density is of order 2600 A/mm2 in a field of 12 Tesla. But there are very important secondary factors that complicate the attainment of this critical current density. The first is that the effective filament diameter must be no larger than about 40 µm. The second factor is that 50% of the cross-section of the Nb3Sn conductor that is pure copper must be protected from any poisoning by any Sn leakage through the diffusion barrier that protects the package of niobium and tin from which the Nb3Sn is formed by a high temperature reaction. These three, somewhat conflicting requirements, mean that optimization of the conductor is complex. The work described in this contract report addresses these conflicting requirements. They show that very sophisticated characterizations can uncover the way to satisfy all 3 requirements and they also suggest that the ultimate optimization of Nb3Sn is still not yet in sight

  8. Application of Near Field Communication Technology for Mobile Airline Ticketing

    Directory of Open Access Journals (Sweden)

    Wayan Suparta

    2012-01-01

    Full Text Available Problem statement: Near Field Communication (NFC technology opens up exciting new usage scenarios for mobile devices based platform. Users of NFC-enabled devices can simply point or touch their devices to other NFC-enabled elements in the environment to communicate with them (‘contactless’, making application and data usage easy and convenient. Approach: The study describes the characteristics and advantages of NFC technology offers for the development of mobile airline ticketing. This scenario describes the potential to overcome the conventional systems that are not gated and use study tickets. In such a system, today a transport application can be loaded on a NFC-enabled phone. To study such a case, Yogyakarta International Airport was taken as an example for a discussion. Results: NFC technology which consisting of three modes of operation and with international standardization can be applied as contactless to simplicity transactions, content delivery and information sharing on a mobile based platform. Conclusion: The idea of NFC application for mobile airline ticketing has been discussed for Yogyakarta International Airport."

  9. Review of the Dynamics of Coalescence and Demulsification by High-Voltage Pulsed Electric Fields

    OpenAIRE

    Ye Peng; Tao Liu; Haifeng Gong; Xianming Zhang

    2016-01-01

    The coalescence of droplets in oil can be implemented rapidly by high-voltage pulse electric field, which is an effective demulsification dehydration technological method. At present, it is widely believed that the main reason of pulse electric field promoting droplets coalescence is the dipole coalescence and oscillation coalescence in pulse electric field, and the optimal coalescence pulse electric field parameters exist. Around the above content, the dynamics of high-voltage pulse electric...

  10. Study on evaluation system of high & new technology superior enterprises

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    With the globalization of economy and science & technology, high & new technology enterprises have become the point of Chinese economic growth and the important basis for constructing innovative country. By analyzing the characteristics of high & new technology superior enterprises and the influential factors, the evaluation index and method based on Grey Relation Analysis are designed. Some high & new technology enterprises in Heilongjiang province are evaluated and application tactics of evaluation system are proposed. This study provides scientific method and basis for government to obtain development state about high & new technology enterprises and design planning and policies of high & new technology industry.

  11. Field testing of high-efficiency supermarket refrigeration

    Energy Technology Data Exchange (ETDEWEB)

    Walker, D. (Foster-Miller, Inc., Waltham, MA (United States))

    1992-12-01

    The Electric Power Research Institute (EPRI) has undertaken a field test to quantify the performance of high-efficiency supermarket refrigeration. The initial work on this project was presented in EPRI report CU-6268 Supermarket Refrigeration Modeling and Field Demonstration.'' The information given here was generated through continued testing at the field test site. The field test was conducted at a supermarket owned by Safeway Stores, Inc., that was located in Menlo Park, CA. Testing was performed with the existing conventional refrigeration system and a high-efficiency multiplex refrigeration system that was installed for these tests. The results of the testing showed that the high-efficiency multiplex system reduced refrigeration energy consumption by 23.9% and peak electric demand for refrigeration by 30.0%. Analyses of these savings showed that the largest portion was due to the use of high-efficiency compressors (29.5% of total saving). Floating head pressure control, ambient and mechanical subcooling, compressor multiplexing and hot gas defrost accounted for 50% of total savings. The remainder of the savings (20.5%) were attributed to the use of an evaporative condenser. Tests were also conducted with several retrofit technologies. The most promising results were obtained with external liquid-suction heat exchangers installed at the outlets of the display cases. Favorable paybacks were calculated for these exchangers when they were used with very low and low temperature refrigeration.

  12. High impact technologies for natural products screening.

    Science.gov (United States)

    Koehn, Frank E

    2008-01-01

    Natural products have historically been a rich source of lead molecules in drug discovery. However, natural products have been de-emphasized as high throughput screening resources in the recent past, in part because of difficulties in obtaining high quality natural products screening libraries, or in applying modern screening assays to these libraries. In addition, natural products programs based on screening of extract libraries, bioassay-guided isolation, structure elucidation and subsequent production scale-up are challenged to meet the rapid cycle times that are characteristic of the modern HTS approach. Fortunately, new technologies in mass spectrometry, NMR and other spectroscopic techniques can greatly facilitate the first components of the process - namely the efficient creation of high-quality natural products libraries, bimolecular target or cell-based screening, and early hit characterization. The success of any high throughput screening campaign is dependent on the quality of the chemical library. The construction and maintenance of a high quality natural products library, whether based on microbial, plant, marine or other sources is a costly endeavor. The library itself may be composed of samples that are themselves mixtures - such as crude extracts, semi-pure mixtures or single purified natural products. Each of these library designs carries with it distinctive advantages and disadvantages. Crude extract libraries have lower resource requirements for sample preparation, but high requirements for identification of the bioactive constituents. Pre-fractionated libraries can be an effective strategy to alleviate interferences encountered with crude libraries, and may shorten the time needed to identify the active principle. Purified natural product libraries require substantial resources for preparation, but offer the advantage that the hit detection process is reduced to that of synthetic single component libraries. Whether the natural products library

  13. The Problems of Management and Marketing of High Technology Services

    Directory of Open Access Journals (Sweden)

    Neringa Petrauskaitė

    2011-04-01

    Full Text Available The article emphasizes the importance of high technologies sector development and complexity level it takes to reach it. Based on scientific literature analysis, including high technologies services features that involve short life cycle, inseparability from science and technologies, as well as existing infrastructure, to solve high technologies development issues, marketing and management methods should be applied. The specific features of the product of high technologies is the reason for high technologies services management and marketing problems that include high risk of business, exceptionally heavy investment and complicated launch of the product. Therefore, there is a need for other solutions, such as the ways to stimulate high technologies development and high technologies products intake and application that should be generated using management and marketing methods.Article in Lithuanian

  14. Novel High Pressure Pump-on-a-Chip Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — HJ Science & Technology, Inc. proposes to develop a novel high pressure "pump-on-a-chip" (HPPOC) technology capable of generating high pressure and flow rate on...

  15. High-field magnetization in transuranium compound

    Energy Technology Data Exchange (ETDEWEB)

    Sugiyama, K. [Graduate School of Science, Osaka University, Toyonaka, Osaka 560-0043 (Japan) and KYOKUGEN, Osaka University, Osaka 560-8531 (Japan)]. E-mail: sugiyama@phys.sci.osaka-u.ac.jp; Nakashima, H. [Graduate School of Science, Osaka University, Toyonaka, Osaka 560-0043 (Japan); Aoki, D. [Institute of Material Research, Tohoku University, Oarai, Ibaraki 311-1313 (Japan); Ikeda, S. [Institute of Material Research, Tohoku University, Oarai, Ibaraki 311-1313 (Japan); Haga, Y. [Advanced Science and Research Centerer, JAEA, Tokai, Ibaraki 319-1195 (Japan); Yamamoto, E. [Advanced Science and Research Centerer, JAEA, Tokai, Ibaraki 319-1195 (Japan); Nakamura, A. [Advanced Science and Research Centerer, JAEA, Tokai, Ibaraki 319-1195 (Japan); Homma, Y. [Institute of Material Research, Tohoku University, Oarai, Ibaraki 311-1313 (Japan); Shiokawa, Y. [Institute of Material Research, Tohoku University, Oarai, Ibaraki 311-1313 (Japan); Kindo, K. [Institite of Solid State Physics, University of Tokyo, Kashiwanoha 5-1-5, Kashiwa, Chiba 277-8581 (Japan); Hagiwara, M. [KYOKUGEN, Osaka University, Osaka 560-8531 (Japan); Onuki, Y. [Graduate School of Science, Osaka University, Toyonaka, Osaka 560-0043 (Japan); Advanced Science and Research Centerer, JAEA, Tokai, Ibaraki 319-1195 (Japan)

    2007-03-15

    We measured the high-field magnetization up to 55T and constructed a magnetic phase diagram for a transuranium antiferromagnet NpRhGa{sub 5} with the tetragonal structure. The magnetization at 4.2K for H(parallel) [100] indicates a sharp metamagnetic transition with a step at H{sub c}=26T and saturates above H{sub s}=38T, reaching 0.43{mu}{sub B}/Np. An ordered moment of 0.96{mu}{sub B}/Np at zero field, which was determined from the neutron scattering experiment, is found to be reduced to 0.43{mu}{sub B}/Np at H{sub s}, together with an orientation of the magnetic moment from the (001) plane to the (100) plane.

  16. A new high-resolution TOF technology

    CERN Document Server

    Fonte, Paulo J R; Williams, M C S

    2000-01-01

    In the framework of the ALICE collaboration we have recently studied the performance of multigap Resistive Plate Chambers operated in avalanche mode and at atmospheric pressure for time-of-flight measurements. The detector provided an overall (detector plus electronics) timing accuracy of 120 ps sigma at an efficiency of 98% for MIPs. The chambers had 4 gas gaps of 0.3 mm, each limited by a metallised ceramic plate and a glass plate, with an active dimension of 4'4cm2. The gas mixture contained C2H2F4+5%isobutane+10%SF6. A few percent of streamer discharges, each releasing about 20 pC, was tolerated without any noticeable inconvenience. This detector opens perspectives of affordable and reliable high granularity large area TOF detectors, with an efficiency and a time resolution comparable to existing scintillator-based TOF technology but with significantly, up to an order of magnitude, lower price per channel.

  17. High Head Unshrouded Impeller Pump Stage Technology

    Science.gov (United States)

    Williams, Robert W.; Skelley, Stephen E.; Stewart, Eric T.; Droege, Alan R.; Prueger, George H.; Chen, Wei-Chung; Williams, Morgan; Turner, James E. (Technical Monitor)

    2000-01-01

    Objective to develop an unshrouded impeller design, which a meets the performance requirements of a 3-stage fuel pump with a 2-stage pump design, has been accomplished. Performance of the baseline unshrouded impeller has been experimentally verified. Unshrouded impeller trade study and final 6+6 unshrouded impeller configuration has been presented. Structurally viable, 6+6-impeller design concept has been produced. Based on results presented in this study, at a nominal 10% tip-clearance, the 6+6 impeller design would increase payload to orbit by almost 625 lbs. per engine. The RLV vehicle requires 7 engines, therefore, application of high head unshrouded technology would increase payload capability by as much as 4,375 lbs. per vehicle.

  18. Molecular field technology applied to virtual screening and finding the bioactive conformation.

    Science.gov (United States)

    Cheeseright, Tim; Mackey Phd, Mark; Rose Phd, Sally; Vinter Phd, Andy

    2007-01-01

    Virtual screening is being applied to reduce the high-throughput screening bottleneck in many pharmaceutical companies and to reduce compound wastage. Cresset's ligand-based virtual screening technology using molecular fields can facilitate rapid identification of novel chemotypes from biologically testing only 200 - 1000 compounds. Four molecular fields calculated using the interaction of different probe atoms with the ligand are sufficient to describe how a ligand binds to its protein. Compounds with similar fields to known active ligands are predicted to have a high probability of showing similar activity. As binding is related to field similarity, this property has been exploited further to predict the bioactive conformation of small sets of structurally diverse active ligands starting from the two-dimensional structures alone without knowledge of the target site structure.

  19. Homogenous BSCCO-2212 Round Wires for Very High Field Magnets

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Scott Campbell

    2012-06-30

    The performance demands on modern particle accelerators generate a relentless push towards higher field magnets. In turn, advanced high field magnet development places increased demands on superconducting materials. Nb3Sn conductors have been used to achieve 16 T in a prototype dipole magnet and are thought to have the capability for {approx}18 T for accelerator magnets (primarily dipoles but also higher order multipole magnets). However there have been suggestions and proposals for such magnets higher than 20 T. The High Energy Physics Community (HEP) has identified important new physics opportunities that are enabled by extremely high field magnets: 20 to 50 T solenoids for muon cooling in a muon collider (impact: understanding of neutrinos and dark matter); and 20+ T dipoles and quadrupoles for high energy hadron colliders (impact: discovery reach far beyond present). This proposal addresses the latest SBIR solicitation that calls for grant applications that seek to develop new or improved superconducting wire technologies for magnets that operate at a minimum of 12 Tesla (T) field, with increases up to 15 to 20 T sought in the near future (three to five years). The long-term development of accelerator magnets with fields greater than 20 T will require superconducting wires having significantly better high-field properties than those possessed by current Nb{sub 3}Sn or other A15 based wires. Given the existing materials science base for Bi-2212 wire processing, we believe that Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub y} (Bi-2212) round wires can be produced in km-long piece lengths with properties suitable to meet both the near term and long term needs of the HEP community. The key advance will be the translation of this materials science base into a robust, high-yield wire technology. While the processing and application of A15 materials have advanced to a much higher level than those of the copper oxide-based, high T{sub c} (HTS) counterparts, the HTS materials have

  20. High-Altitude Platforms - Present Situation and Technology Trends

    Directory of Open Access Journals (Sweden)

    Flavio Araripe D'Oliveira

    2016-07-01

    Full Text Available High-altitude platforms (HAPs are aircraft, usually unmanned airships or airplanes positioned above 20 km, in the stratosphere, in order to compose a telecommunications network or perform remote sensing. In the 1990 and 2000 decades, several projects were launched, but very few had continued. In 2014, 2 major Internet companies (Google and Facebook announced investments in new HAP projects to provide Internet access in regions without communication infrastructure (terrestrial or satellite, bringing back attention to the development of HAP. This article aims to survey the history of HAPs, the current state-of-the-art (April 2016, technology trends and challenges. The main focus of this review will be on technologies directly related to the aerial platform, inserted in the aeronautical engineering field of knowledge, not detailing aspects of the telecommunications area.

  1. High-pressure xenon detector development at Constellation Technology Corporation

    Energy Technology Data Exchange (ETDEWEB)

    Austin, Robert A. [Constellation Technology Corporation, 7887 Bryan Dairy Road, Suite 100, Largo, FL 33777 (United States)], E-mail: austin@contech.com

    2007-08-21

    Xenon-filled ionization detectors, due to their high atomic number fill gas (Z=54), moderate densities ({approx}0.3-0.5 g/cm{sup 3}) and good energy resolution (2-4% at 662 keV), fill an important niche between more familiar technologies such as NaI(Tl) scintillators and germanium detectors. Until recently, difficulties with obtaining sufficient xenon purity, reducing microphonic sensitivity, and developing low-noise electronics compatible with small ionization signals have hampered the development of this nuclear detection field. Constellation Technology Corporation, whose experience with xenon detectors goes back to the mid 1990s, has made significant progress in these areas and has developed a commercial line of detectors with active volumes ranging from small (35 g Xe) to large (1400 g Xe). Current applications for Constellation's detectors are principally in the area of defense (Unmanned Aerial Vehicles and Advanced Spectroscopic Portals), but as awareness of this technology grows, it will surely find applications in a much expanded range of fields.

  2. High-pressure xenon detector development at Constellation Technology Corporation

    Science.gov (United States)

    Austin, Robert A.

    2007-08-01

    Xenon-filled ionization detectors, due to their high atomic number fill gas ( Z=54), moderate densities (˜0.3-0.5 g/cm 3) and good energy resolution (2-4% at 662 keV), fill an important niche between more familiar technologies such as NaI(Tl) scintillators and germanium detectors. Until recently, difficulties with obtaining sufficient xenon purity, reducing microphonic sensitivity, and developing low-noise electronics compatible with small ionization signals have hampered the development of this nuclear detection field. Constellation Technology Corporation, whose experience with xenon detectors goes back to the mid 1990s, has made significant progress in these areas and has developed a commercial line of detectors with active volumes ranging from small (35 g Xe) to large (1400 g Xe). Current applications for Constellation's detectors are principally in the area of defense (Unmanned Aerial Vehicles and Advanced Spectroscopic Portals), but as awareness of this technology grows, it will surely find applications in a much expanded range of fields.

  3. Wide-Field-of-View, High-Resolution, Stereoscopic Imager

    Science.gov (United States)

    Prechtl, Eric F.; Sedwick, Raymond J.

    2010-01-01

    A device combines video feeds from multiple cameras to provide wide-field-of-view, high-resolution, stereoscopic video to the user. The prototype under development consists of two camera assemblies, one for each eye. One of these assemblies incorporates a mounting structure with multiple cameras attached at offset angles. The video signals from the cameras are fed to a central processing platform where each frame is color processed and mapped into a single contiguous wide-field-of-view image. Because the resolution of most display devices is typically smaller than the processed map, a cropped portion of the video feed is output to the display device. The positioning of the cropped window will likely be controlled through the use of a head tracking device, allowing the user to turn his or her head side-to-side or up and down to view different portions of the captured image. There are multiple options for the display of the stereoscopic image. The use of head mounted displays is one likely implementation. However, the use of 3D projection technologies is another potential technology under consideration, The technology can be adapted in a multitude of ways. The computing platform is scalable, such that the number, resolution, and sensitivity of the cameras can be leveraged to improve image resolution and field of view. Miniaturization efforts can be pursued to shrink the package down for better mobility. Power savings studies can be performed to enable unattended, remote sensing packages. Image compression and transmission technologies can be incorporated to enable an improved telepresence experience.

  4. High-tech exports from developing countries: A symptom of technology spurts or statistical illusion?

    OpenAIRE

    Martin Srholec

    2005-01-01

    Specialization in high-tech products is frequently used to capture technology intensity of exports. The literature suggests that developing countries are increasingly becoming exporters of high-tech products, and some may even be among the most deeply specialized countries in the field of high-tech exports. The paper scrutinizes the relevance of the taxonomies that classify exports by technological intensity in this context. It is shown that specialization in high-tech exports typically does ...

  5. Technology characterization: high Btu gas transmission

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-04-01

    A technology characterization for high Btu gas transmission was prepared. The scope of work was confined to a literature review. The work was divided into four specific areas as follows: (1) a summary of pertinent information from the environmental report of the Great Lakes Gas Company for a 365-mile high pressure pipeline serving American Natural Gas Company's proposed lignite gasification plant in North Dakota; (2) statistical information concerning the operation of the existing United States natural gas transmission pipeline network; (3) a summary of pertinent information from the environmental impact statement of the United States Department of Interior for the proposed 1,619-mile Northern Border Pipeline from Morgan, Montana to Delmont, Pennsylvania; and (4) a summary of pertinent information from the environmental impact statement of the Federal Power Commission for a proposed El Paso Natural Gas Company 418-mile pipeline within the State of Texas which was to be constructed in response to the displacement of natural gas by Liquefied Natural Gas (LNG) importation on the East Coast.

  6. A high performance field-reversed configuration

    Energy Technology Data Exchange (ETDEWEB)

    Binderbauer, M. W.; Tajima, T.; Steinhauer, L. C.; Garate, E.; Tuszewski, M.; Smirnov, A.; Gota, H.; Barnes, D.; Deng, B. H.; Thompson, M. C.; Trask, E.; Yang, X.; Putvinski, S.; Rostoker, N.; Andow, R.; Aefsky, S.; Bolte, N.; Bui, D. Q.; Ceccherini, F.; Clary, R. [Tri Alpha Energy, Inc., P.O. Box 7010, Rancho Santa Margarita, California 92688 (United States); and others

    2015-05-15

    Conventional field-reversed configurations (FRCs), high-beta, prolate compact toroids embedded in poloidal magnetic fields, face notable stability and confinement concerns. These can be ameliorated by various control techniques, such as introducing a significant fast ion population. Indeed, adding neutral beam injection into the FRC over the past half-decade has contributed to striking improvements in confinement and stability. Further, the addition of electrically biased plasma guns at the ends, magnetic end plugs, and advanced surface conditioning led to dramatic reductions in turbulence-driven losses and greatly improved stability. Together, these enabled the build-up of a well-confined and dominant fast-ion population. Under such conditions, highly reproducible, macroscopically stable hot FRCs (with total plasma temperature of ∼1 keV) with record lifetimes were achieved. These accomplishments point to the prospect of advanced, beam-driven FRCs as an intriguing path toward fusion reactors. This paper reviews key results and presents context for further interpretation.

  7. High-field Magnet Development toward the High Luminosity LHC

    Energy Technology Data Exchange (ETDEWEB)

    Apollinari, Giorgio [Fermilab

    2014-07-01

    The upcoming Luminosity upgrade of the LHC (HL-LHC) will rely on the use of Accelerator Quality Nb3Sn Magnets which have been the focus of an intense R&D effort in the last decade. This contribution will describe the R&D and results of Nb3Sn Accelerator Quality High Field Magnets development efforts, with emphasis on the activities considered for the HL-LHC upgrades.

  8. High performance nano-composite technology development

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Whung Whoe; Rhee, C. K.; Kim, S. J.; Park, S. D. [KAERI, Taejon (Korea, Republic of); Kim, E. K.; Jung, S. Y.; Ryu, H. J. [KRICT, Taejon (Korea, Republic of); Hwang, S. S.; Kim, J. K.; Hong, S. M. [KIST, Taejon (Korea, Republic of); Chea, Y. B. [KIGAM, Taejon (Korea, Republic of); Choi, C. H.; Kim, S. D. [ATS, Taejon (Korea, Republic of); Cho, B. G.; Lee, S. H. [HGREC, Taejon (Korea, Republic of)

    1999-06-15

    The trend of new material development are being to carried out not only high performance but also environmental attraction. Especially nano composite material which enhances the functional properties of components, extending the component life resulting to reduced the wastes and environmental contamination, has a great effect on various industrial area. The application of nano composite, depends on the polymer matrix and filler materials, has various application from semiconductor to medical field. In spite of nano composite merits, nano composite study are confined to a few special materials as a lab, scale because a few technical difficulties are still on hold. Therefore, the purpose of this study establishes the systematical planning to carried out the next generation projects on order to compete with other countries and overcome the protective policy of advanced countries with grasping over sea's development trends and our present status. (author).

  9. ADX: a high field, high power density, Advanced Divertor test eXperiment

    Science.gov (United States)

    Vieira, R.; Labombard, B.; Marmar, E.; Irby, J.; Shiraiwa, S.; Terry, J.; Wallace, G.; Whyte, D. G.; Wolfe, S.; Wukitch, S.; ADX Team

    2014-10-01

    The MIT PSFC and collaborators are proposing an advanced divertor experiment (ADX) - a tokamak specifically designed to address critical gaps in the world fusion research program on the pathway to FNSF/DEMO. This high field (6.5 tesla, 1.5 MA), high power density (P/S ~ 1.5 MW/m2) facility would utilize Alcator magnet technology to test innovative divertor concepts for next-step DT fusion devices (FNSF, DEMO) at reactor-level boundary plasma pressures and parallel heat flux densities while producing high performance core plasma conditions. The experimental platform would also test advanced lower hybrid current drive (LHCD) and ion-cyclotron range of frequency (ICRF) actuators and wave physics at the plasma densities and magnetic field strengths of a DEMO, with the unique ability to deploy launcher structures both on the low-magnetic-field side and the high-field side - a location where energetic plasma-material interactions can be controlled and wave physics is most favorable for efficient current drive, heating and flow drive. This innovative experiment would perform plasma science and technology R&D necessary to inform the conceptual development and accelerate the readiness-for-deployment of FNSF/DEMO - in a timely manner, on a cost-effective research platform. Supported by DE-FC02-99ER54512.

  10. Space Technology 5 (ST-5) Observations of Field-Aligned Currents: Temporal Variability

    Science.gov (United States)

    Le, Guan

    2010-01-01

    Space Technology 5 (ST-5) is a three micro-satellite constellation deployed into a 300 x 4500 km, dawn-dusk, sun-synchronous polar orbit from March 22 to June 21, 2006, for technology validations. In this paper, we present a study of the temporal variability of field-aligned currents using multi-point magnetic field measurements from STS. The data demonstrate that masoscale current structures are commonly embedded within large-scale field-aligned current sheets. The meso-scale current structures are very dynamic with highly variable current density and/or polarity in time scales of about 10 min. They exhibit large temporal variations during both quiet and disturbed times in such time scales. On the other hand, the data also shown that the time scales for the currents to be relatively stable are about I min for meso-scale currents and about 10 min for large scale current sheets. These temporal features are obviously associated with dynamic variations of their particle carriers (mainly electrons) as they respond to the variations of the parallel electric field in auroral acceleration region. The characteristic time scales for the temporal variability of meso-scale field-aligned currents are found to be consistent with those of auroral parallel electric field.

  11. Space Technology 5 Multi-Point Observations of Temporal Variability of Field-Aligned Currents

    Science.gov (United States)

    Le, Guan; Wang, Yongli; Slavin, James A.; Strangeway, Robert J.

    2008-01-01

    Space Technology 5 (ST5) is a three micro-satellite constellation deployed into a 300 x 4500 km, dawn-dusk, sun-synchronous polar orbit from March 22 to June 21, 2006, for technology validations. In this paper, we present a study of the temporal variability of field-aligned currents using multi-point magnetic field measurements from ST5. The data demonstrate that meso-scale current structures are commonly embedded within large-scale field-aligned current sheets. The meso-scale current structures are very dynamic with highly variable current density and/or polarity in time scales of approximately 10 min. They exhibit large temporal variations during both quiet and disturbed times in such time scales. On the other hand, the data also shown that the time scales for the currents to be relatively stable are approximately 1 min for meso-scale currents and approximately 10 min for large scale current sheets. These temporal features are obviously associated with dynamic variations of their particle carriers (mainly electrons) as they respond to the variations of the parallel electric field in auroral acceleration region. The characteristic time scales for the temporal variability of meso-scale field-aligned currents are found to be consistent with those of auroral parallel electric field.

  12. Nb$_3$Sn High Field Magnets for the High Luminosity LHC Upgrade Project

    CERN Document Server

    AUTHOR|(CDS)2075881

    2015-01-01

    The high luminosity upgrade of the Large Hadron Collider at CERN requires a new generation of high field superconducting magnets. High field large aperture quadrupoles (MQXF) are needed for the low-beta triplets close to the ATLAS and CMS detectors, and high field two-in-one dipoles (11-T dipoles) are needed to make room for additional collimation. The MQXF quadrupoles, with a field gradient of 140 T/m in 150 mm aperture, have a peak coil field of 12.1 T at nominal current. The 11-T dipoles, with an aperture of 60 mm, have a peak coil field of 11.6 T at nominal current. Both magnets require Nb3Sn conductor and are the first applications of this superconductor to actual accelerator magnets. Collaboration between the US LARP (LHC Accelerator Research Program) and CERN is developing the MQXF magnets, whereas the 11-T dipole magnets are being developed by CERN and Fermilab. This paper reviews the status of Nb3Sn technology for accelerator magnets, discusses its main challenges, and discusses how the MQXF and 11-T...

  13. High sensitivity field asymmetric ion mobility spectrometer

    Science.gov (United States)

    Chavarria, Mario A.; Matheoud, Alessandro V.; Marmillod, Philippe; Liu, Youjiang; Kong, Deyi; Brugger, Jürgen; Boero, Giovanni

    2017-03-01

    A high sensitivity field asymmetric ion mobility spectrometer (FAIMS) was designed, fabricated, and tested. The main components of the system are a 10.6 eV UV photoionization source, an ion filter driven by a high voltage/high frequency n-MOS inverter circuit, and a low noise ion detector. The ion filter electronics are capable to generate square waveforms with peak-to-peak voltages up to 1000 V at frequencies up to 1 MHz with adjustable duty cycles. The ion detector current amplifier has a gain up to 1012 V/A with an effective equivalent input noise level down to about 1 fA/Hz1/2 during operation with the ion filter at the maximum voltage and frequency. The FAIMS system was characterized by detecting different standard chemical compounds. Additionally, we investigated the use of a synchronous modulation/demodulation technique to improve the signal-to-noise ratio in FAIMS measurements. In particular, we implemented the modulation of the compensation voltage with the synchronous demodulation of the ion current. The analysis of the measurements at low concentration levels led to an extrapolated limit of detection for acetone of 10 ppt with an averaging time of 1 s.

  14. High technology in developing countries: Analysis of technology strategy, technology transfer, and success factors in the aircraft industry

    NARCIS (Netherlands)

    Steenhuis, Harm-Jan; Bruijn, de Erik J.

    2004-01-01

    Economical development is highly related to technological development. It is therefore not surprising that many of the industrially developing nations follow explicit strategies to increase their technological competence level. Industrially developing countries may even pursue a strategy of developi

  15. High technology in developing countries: Analysis of technology strategy, technology transfer, and success factors in the aircraft industry

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2004-01-01

    Economical development is highly related to technological development. It is therefore not surprising that many of the industrially developing nations follow explicit strategies to increase their technological competence level. Industrially developing countries may even pursue a strategy of

  16. Nonlinear relaxation field in charged systems under high electric fields

    Energy Technology Data Exchange (ETDEWEB)

    Morawetz, K

    2000-07-01

    The influence of an external electric field on the current in charged systems is investigated. The results from the classical hierarchy of density matrices are compared with the results from the quantum kinetic theory. The kinetic theory yields a systematic treatment of the nonlinear current beyond linear response. To this end the dynamically screened and field-dependent Lenard-Balescu equation is integrated analytically and the nonlinear relaxation field is calculated. The classical linear response result known as Debye - On-Sager relaxation effect is only obtained if asymmetric screening is assumed. Considering the kinetic equation of one specie the other species have to be screened dynamically while the screening with the same specie itself has to be performed statically. Different other approximations are discussed and compared. (author)

  17. Novel High Pressure Pump-on-a-Chip Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — HJ Science & Technology, Inc proposes to develop a novel high pressure "pump-on-a-chip" and "valve-on-a-chip" microfluidic technology for NASA planetary science...

  18. High-precision acquisition technology of telluric field on magnetotellurics%大地电磁测深中大地电场的高精度采集技术

    Institute of Scientific and Technical Information of China (English)

    王辉; 叶高峰; 魏文博; 金胜; 张巍

    2013-01-01

    大地电磁测深需要采集正交的天然电磁场信号,其中大地电场信号微弱且易受环境噪声影响.为了提高大地电场的测量精度,本文通过试制新型Pb-PbCl2不极化电极和改变电极的掩埋方式,室内和野外对比实验结果表明:试制电极具有级差小、稳定时间长的优点;采用加桶加水的方式掩埋电极,不仅可以提高电极极差的稳定性,还有利于减小电极极差突变的机率;电极掩埋深度对电极的稳定性影响很大,深埋电极可以有效抑制电极极差的漂移.另外,野外大地电磁数据采集时难免会遇到了一些沙漠、河流等特殊地形,采用传统的测量方式无法采集到精确的大地电场信号,本文通过对比实验,总结了在特殊地形条件下大地电磁信号采集的技术要点,如在沙漠地区,电极坑中应加入大量泥浆以减小电极的接地电阻,当测点在河流附近时,电极对不应跨过河面,减小自然电位对大地电场的影响.%Magnetotelluric (MT) sounding method measures the orthogonal natural telluric and magnetic signals.The telluric field is generally weak and apt to be contaminated by noise.The accuracy of telluric field measurement determines the quality of MT data.In order to obtain high-precision telluric field data,in this study,we discuss on how to improve the measurement accuracy from three aspects.Firstly,we investigated the reasons causing the variation of electric potential difference of non-polarizable electrodes,which were wildly used for acquiring telluric filed and developed Lead-Lead Chloride electrodes.The test results of comparison with other electrodes showed that,the new type of electrodes have lower potential difference and longer stable duration.The field experiments results show that we can get longer period signals by applied the self-made electrodes and improve the MT data quality.Secondly,given that the burying depth of electrodes also affects the stability of

  19. Effective Work Function Engineering for Aggressively Scaled Planar and Multi-Gate Fin Field-Effect Transistor-Based Devices with High-k Last Replacement Metal Gate Technology

    Science.gov (United States)

    Veloso, Anabela; Aik Chew, Soon; Higuchi, Yuichi; Ragnarsson, Lars-Åke; Simoen, Eddy; Schram, Tom; Witters, Thomas; Van Ammel, Annemie; Dekkers, Harold; Tielens, Hilde; Devriendt, Katia; Heylen, Nancy; Sebaai, Farid; Brus, Stephan; Favia, Paola; Geypen, Jef; Bender, Hugo; Phatak, Anup; Chen, Michael S.; Lu, Xinliang; Ganguli, Seshadri; Lei, Yu; Tang, Wei; Fu, Xinyu; Gandikota, Srinivas; Noori, Atif; Brand, Adam; Yoshida, Naomi; Thean, Aaron; Horiguchi, Naoto

    2013-04-01

    This work reports on aggressively scaled replacement metal gate, high-k last devices (RMG-HKL), exploring several options for effective work function (EWF) engineering, and targeting logic high-performance and low-power applications. Tight low-threshold voltage (VT) distributions for scaled NMOS devices are obtained by controlled TiN/TiAl-alloying, either by using RF-physical vapor deposition (RF-PVD) or atomic layer deposition (ALD) for TiN growth. The first technique allows optimization of the TiAl/TiN thicknesses at the bottom of gate trenches while maximizing the space to be filled with a low-resistance metal; using ALD minimizes the occurrence of preferential paths, at gate sidewalls, for Al diffusion into the high-k dielectric, reducing gate leakage (JG). For multi-gate fin field-effect transistors (FinFETs) which require smaller EWF shifts from mid-gap for low-VT: 1) conformal, lower-JG ALD-TiN/TaSiAl; and 2) Al-rich ALD-TiN by controlled Al diffusion from the fill-metal are demonstrated to be promising candidates. Comparable bias temperature instability (BTI), improved noise behavior, and slightly reduced equivalent oxide thickness (EOT) are measured on Al-rich EWF-metal stacks.

  20. High gradient insulator technology for the dielectric wall accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Sampayan, S.; Caporaso, G.; Carder, B. [and others

    1995-04-27

    Insulators composed of finely spaced alternating layers of dielectric and metal are thought to minimize secondary emission avalanche (SEA) growth. Most data to date was taken with small samples (order 10 cm{sup 2} area) in the absence of an ion or electron beam. The authors have begun long pulse (>1 {mu}s) high voltage testing of small hard seal samples. Further, they have performed short pulse (20 ns) high voltage testing of moderate scale bonded samples (order 100 cm{sup 2} area) in the presence of a 1 kA electron beam. Results thus far indicate a 1.0 to 4.0 increase in the breakdown electric field stress is possible with this technology.

  1. High-Speed, Three Dimensional Object Composition Mapping Technology

    Energy Technology Data Exchange (ETDEWEB)

    Ishikawa, M Y

    2001-02-14

    This document overviews an entirely new approach to determining the composition--the chemical-elemental, isotopic and molecular make-up--of complex, highly structured objects, moreover with microscopic spatial resolution in all 3 dimensions. The front cover depicts the new type of pulsed laser system at the heart of this novel technology under adjustment by Alexis Wynne, and schematically indicates two of its early uses: swiftly analyzing the 3-D composition governed structure of a transistor circuit with both optical and mass-spectrometric detectors, and of fossilized dinosaur and turtle bones high-speed probed by optical detection means. Studying the composition-cued 3-D micro-structures of advanced composite materials and the microscopic scale composition-texture of biological tissues are two near-term examples of the rich spectrum of novel applications enabled by this field-opening analytic tool-set.

  2. High-Gain High-Field Fusion Plasma

    Science.gov (United States)

    Li, Ge

    2015-01-01

    A Faraday wheel (FW)—an electric generator of constant electrical polarity that produces huge currents—could be implemented in an existing tokamak to study high-gain high-field (HGHF) fusion plasma, such as the Experimental Advanced Superconducting Tokamak (EAST). HGHF plasma can be realized in EAST by updating its pulsed-power system to compress plasma in two steps by induction fields; high gains of the Lawson trinity parameter and fusion power are both predicted by formulating the HGHF plasma. Both gain rates are faster than the decrease rate of the plasma volume. The formulation is checked by earlier ATC tests. Good agreement between theory and tests indicates that scaling to over 10 T at EAST may be possible by two-step compressions with a compression ratio of the minor radius of up to 3. These results point to a quick new path of fusion plasma study, i.e., simulating the Sun by EAST. PMID:26507314

  3. HIGH VOLTAGE ENVIRONMENTAL APPLICATIONS, INC.ELECTRON BEAM TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report evaluates a high-voltage electron beam (E-beam) technology's ability to destroy volatile organic compounds (VOCs) and other contaminants present in liquid wastes. Specifically, this report discusses performance and economic data from a Superfund Innovative Technology...

  4. Plant Responses to High Frequency Electromagnetic Fields

    Directory of Open Access Journals (Sweden)

    Alain Vian

    2016-01-01

    Full Text Available High frequency nonionizing electromagnetic fields (HF-EMF that are increasingly present in the environment constitute a genuine environmental stimulus able to evoke specific responses in plants that share many similarities with those observed after a stressful treatment. Plants constitute an outstanding model to study such interactions since their architecture (high surface area to volume ratio optimizes their interaction with the environment. In the present review, after identifying the main exposure devices (transverse and gigahertz electromagnetic cells, wave guide, and mode stirred reverberating chamber and general physics laws that govern EMF interactions with plants, we illustrate some of the observed responses after exposure to HF-EMF at the cellular, molecular, and whole plant scale. Indeed, numerous metabolic activities (reactive oxygen species metabolism, α- and β-amylase, Krebs cycle, pentose phosphate pathway, chlorophyll content, terpene emission, etc. are modified, gene expression altered (calmodulin, calcium-dependent protein kinase, and proteinase inhibitor, and growth reduced (stem elongation and dry weight after low power (i.e., nonthermal HF-EMF exposure. These changes occur not only in the tissues directly exposed but also systemically in distant tissues. While the long-term impact of these metabolic changes remains largely unknown, we propose to consider nonionizing HF-EMF radiation as a noninjurious, genuine environmental factor that readily evokes changes in plant metabolism.

  5. High-throughput screening technologies for drug glucuronidation profiling.

    Science.gov (United States)

    Trubetskoy, Olga; Finel, Moshe; Trubetskoy, Vladimir

    2008-08-01

    A significant number of endogenous and exogenous compounds, including many therapeutic agents, are metabolized in humans via glucuronidation, catalysed by uridine diphosphoglucuronosyltransferases (UGTs). The study of the UGTs is a growing field of research, with constantly accumulated and updated information regarding UGT structure, purification, substrate specificity and inhibition, including clinically relevant drug interactions. Development of reliable UGT assays for the assessment of individual isoform substrate specificity and for the discovery of novel isoform-specific substrates and inhibitors is crucial for understanding the function and regulation of the UGT enzyme family and its clinical and pharmacological relevance. High-throughput screening (HTS) is a powerful technology used to search for novel substrates and inhibitors for a wide variety of targets. However, application of HTS in the context of UGTs is complicated because of the poor stability, low levels of expression, low affinity and broad substrate specificity of the enzymes, combined with difficulties in obtaining individual UGT isoforms in purified format, and insufficient information regarding isoform-specific substrates and inhibitors. This review examines the current status of HTS assays used in the search for novel UGT substrates and inhibitors, emphasizing advancements and challenges in HTS technologies for drug glucuronidation profiling, and discusses possible avenues for future advancement of the field.

  6. Comparing Natural Gas Leakage Detection Technologies Using an Open-Source "Virtual Gas Field" Simulator.

    Science.gov (United States)

    Kemp, Chandler E; Ravikumar, Arvind P; Brandt, Adam R

    2016-04-19

    We present a tool for modeling the performance of methane leak detection and repair programs that can be used to evaluate the effectiveness of detection technologies and proposed mitigation policies. The tool uses a two-state Markov model to simulate the evolution of methane leakage from an artificial natural gas field. Leaks are created stochastically, drawing from the current understanding of the frequency and size distributions at production facilities. Various leak detection and repair programs can be simulated to determine the rate at which each would identify and repair leaks. Integrating the methane leakage over time enables a meaningful comparison between technologies, using both economic and environmental metrics. We simulate four existing or proposed detection technologies: flame ionization detection, manual infrared camera, automated infrared drone, and distributed detectors. Comparing these four technologies, we found that over 80% of simulated leakage could be mitigated with a positive net present value, although the maximum benefit is realized by selectively targeting larger leaks. Our results show that low-cost leak detection programs can rely on high-cost technology, as long as it is applied in a way that allows for rapid detection of large leaks. Any strategy to reduce leakage should require a careful consideration of the differences between low-cost technologies and low-cost programs.

  7. Review of the Dynamics of Coalescence and Demulsification by High-Voltage Pulsed Electric Fields

    Directory of Open Access Journals (Sweden)

    Ye Peng

    2016-01-01

    Full Text Available The coalescence of droplets in oil can be implemented rapidly by high-voltage pulse electric field, which is an effective demulsification dehydration technological method. At present, it is widely believed that the main reason of pulse electric field promoting droplets coalescence is the dipole coalescence and oscillation coalescence in pulse electric field, and the optimal coalescence pulse electric field parameters exist. Around the above content, the dynamics of high-voltage pulse electric field promoting the coalescence of emulsified droplets is studied by researchers domestically and abroad. By review, the progress of high-voltage pulse electric field demulsification technology can get a better understanding, which has an effect of throwing a sprat to catch a whale on promoting the industrial application.

  8. Design of High Field Solenoids made of High Temperature Superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Bartalesi, Antonio; /Pisa U.

    2010-12-01

    This thesis starts from the analytical mechanical analysis of a superconducting solenoid, loaded by self generated Lorentz forces. Also, a finite element model is proposed and verified with the analytical results. To study the anisotropic behavior of a coil made by layers of superconductor and insulation, a finite element meso-mechanic model is proposed and designed. The resulting material properties are then used in the main solenoid analysis. In parallel, design work is performed as well: an existing Insert Test Facility (ITF) is adapted and structurally verified to support a coil made of YBa{sub 2}Cu{sub 3}O{sub 7}, a High Temperature Superconductor (HTS). Finally, a technological winding process was proposed and the required tooling is designed.

  9. Introduction to the field of emerging technology management

    NARCIS (Netherlands)

    Groen, A. J.; Walsh, S. T.

    2013-01-01

    Many see emerging technologies as a solution vector for the global challenges of the twenty-first century. Today's emerging technologies include: computational sciences; nanotechnology; micro-electro-mechanical systems (MEMS); bio-fuels; mobile technologies and a host of others. Yet an adequate unde

  10. Introduction to the field of emerging technology management

    NARCIS (Netherlands)

    Groen, A. J.; Walsh, S. T.

    2013-01-01

    Many see emerging technologies as a solution vector for the global challenges of the twenty-first century. Today's emerging technologies include: computational sciences; nanotechnology; micro-electro-mechanical systems (MEMS); bio-fuels; mobile technologies and a host of others. Yet an adequate unde

  11. Introduction to the field of emerging technology management

    NARCIS (Netherlands)

    Groen, Arend J.; Walsh, Steven Thomas

    2013-01-01

    Many see emerging technologies as a solution vector for the global challenges of the twenty-first century. Today's emerging technologies include: computational sciences; nanotechnology; micro-electro-mechanical systems (MEMS); bio-fuels; mobile technologies and a host of others. Yet an adequate

  12. Role of high-field MR systems in neuroscience

    Energy Technology Data Exchange (ETDEWEB)

    Nakada, Tsutomu [Niigata Univ. (Japan). Brain Research Inst

    1999-07-01

    Nuclear magnetic resonance (NMR) is a remarkably versatile technology applicable to various aspects of medical science. Currently, there are three categories of MR techniques available for probing human brain function in detail. The first category comprises the most widely utilized techniques which make use of the metabolic effects of brain activation, represented by BOLD functional magnetic resonance imaging (fMRI) and EPISTAR cerebral blood flow imaging. The second category of techniques deals with apparent diffusion tensor in probing the cellular aspects of brain function and is represented by magnetic resonance axonography (MRX). The third category of techniques is the oldest and as yet the most underutilized. These techniques which include MR spectroscopy (MRS) and spectroscopic imaging (SI), are based on classical NMR spectroscopy and are capable of providing biochemical information in vivo. In these critically important but highly demanding techniques, high-field systems possess significant advantages over conventional systems. (author)

  13. Recent Progress Using High-throughput Sequencing Technologies in Plant Molecular Breeding

    Institute of Scientific and Technical Information of China (English)

    Qiang Gao; Guidong Yue; Wenqi Li; Junyi Wang; Jiaohui Xu; Ye Yin

    2012-01-01

    High-throughput sequencing is a revolutionary technological innovation in DNA sequencing.This technology has an ultra-low cost per base of sequencing and an overwhelmingly high data output.High-throughput sequencing has brought novel research methods and solutions to the research fields of genomics and post-genomics.Furthermore,this technology is leading to a new molecular breeding revolution that has landmark significance for scientific research and enables us to launch multi-level,multifaceted,and multi-extent studies in the fields of crop genetics,genomics,and crop breeding.In this paper,we review progress in the application of high-throughput sequencing technologies to plant molecular breeding studies.

  14. Space Technology 5 Multipoint Observations of Temporal and Spatial Variability of Field-Aligned Currents

    Science.gov (United States)

    Le, G.; Wang, Y.; Slavin, J. A.; Strangeway, R. L.

    2009-01-01

    Space Technology 5 (ST5) is a constellation mission consisting of three microsatellites. It provides the first multipoint magnetic field measurements in low Earth orbit, which enables us to separate spatial and temporal variations. In this paper, we present a study of the temporal variability of field-aligned currents using the ST5 data. We examine the field-aligned current observations during and after a geomagnetic storm and compare the magnetic field profiles at the three spacecraft. The multipoint data demonstrate that mesoscale current structures, commonly embedded within large-scale current sheets, are very dynamic with highly variable current density and/or polarity in approx.10 min time scales. On the other hand, the data also show that the time scales for the currents to be relatively stable are approx.1 min for mesoscale currents and approx.10 min for large-scale currents. These temporal features are very likely associated with dynamic variations of their charge carriers (mainly electrons) as they respond to the variations of the parallel electric field in auroral acceleration region. The characteristic time scales for the temporal variability of mesoscale field-aligned currents are found to be consistent with those of auroral parallel electric field.

  15. Wide field of view adaptive optical system for lightweight deployable telescope technologies

    Science.gov (United States)

    McComas, Brian K.; Cermak, Michael A.; Friedman, Edward J.

    2003-02-01

    A NASA research contract (NAS1-00116) was awarded to Ball Aerospace & Technologies Corp. in January 2000 to study wide field-of-view adaptive optical systems. These systems will be required on future high resolution Earth remote sensing systems that employ large, flexible, lightweight, deployed primary mirrors. The deformations from these primary mirrors will introduce aberrations into the optical system, which must be removed by corrective optics. For economic reasons, these remote sensing systems must have a large field-of-view (a few degrees). Unlike ground-based adaptive optical systems, which have a negligible field-of-view, the adaptive optics on these space-based remote sensing systems will be required to correct for the deformations in the primary mirror over the entire field-of-view. A new error function, which is an enhancement to conventional adaptive optics, for wide field-of-view optical systems will be introduced. This paper will present the goals of the NASA research project and its progress. The initial phase of this research project is a demonstration of the wide field-of-view adaptive optics theory. A breadboard has been designed and built for this purpose. The design and assembly of the breadboard will be presented, along with the final results for this phase of the research project. Finally, this paper will show the applicability of wide field-of-view adaptive optics to space-based astronomical systems.

  16. Key techniques of the high precision gravity field system

    Science.gov (United States)

    Xu, Weimin; Chen, Shi; Lu, Hongyan; Shi, Lei

    2017-04-01

    Ground-based gravity time series provide a direct method to monitor all sources of mass changes from local to global scale. But the effectively infinite spatial sensitivity of gravity measurements make it difficult to isolate the signal of interest. The high precision gravity field system is an alternative approach of modeling mass changes under-ground. The field system, consists of absolute gravity, gravity and gravity gradient, GNSS, leveling and climate hydrology measurements, can improve the signal-to-noise ratio for many applications by removing contributions of unwanted signal from elevation changes, air pressure changes, local hydrology, and others. The networks of field system combination, such as field-profile in more than 100 kilometers, can be used in critical zone with high seismic risk for monitoring earth dynamics, volcanic and seismic phenomena. The system is constituted by 9 typical observation stations in 3*3 array (or 4 in 2*2 array) in 60 square meters field, each station is designed for integrated measurements, including absolute gravity, gravity gradient, elevation changes, air pressure and hydrology. Time-lapse gravity changes resulting from absolute gravimeter (FG5 or A10) with standard deviation less than 2 μGal, without the contributions of Earth tides, loading and polar motion. Additional measurements such as air pressure change, local hydrology and soil moisture are indispensable. The elevation changes resulting from GNSS (on the base station) and leveling (between stations) with precision less than 10 mm. The gravity gradient is the significant measurement for delimiting the location of the related mass changes underground the station, which is measured by Scintrex CG-5 gravimeters in different height (80cm in the test field), with precision less than 10 E. It is necessary to improve the precision of gravity gradient measurements by certain method in field experiment for the high precision measurement system. Acknowledgment: This

  17. Integration of field emitter array and thin-film transistor using polycrystalline silicon process technology

    CERN Document Server

    Song, Y H; Kang, S Y; Park Jeong Man; Cho, K I

    1998-01-01

    We present the monolithic integration of a gated polycrystalline silicon field emitter array (poly-Si FEA) and a thin-film transistor(TFT) on an insulating substrate for active-matrix field emission displays (AMFEDs). The TFT was designed to have low off-state currents even at a high drain voltage. Amorphous silicon has been used as a starting material of the poly-Si FEA for improving surface smoothness and uniformity of the tips, and the gate holes have been formed by using an etch-back process. The integrated poly-Si TFT controlled electron emissions of the poly-Si FEA actively, resulting in great improvement in the emission reliability along with a low-voltage control, below 15 V, of field emission, The developed technology has potential applications in AMFEDs on glass substrates.

  18. A High Technology Military Postal Service.

    Science.gov (United States)

    Mail to military personnel overseas is delivered essentially in the same way it was during World War I. The use of electronic mail has been growing...in private industry and the United States Postal Service recently began an international application of electronic mail . The new technology offers

  19. Investigating High Field Gravity using Astrophysical Techniques

    Energy Technology Data Exchange (ETDEWEB)

    Bloom, Elliott D.; /SLAC

    2008-02-01

    The purpose of these lectures is to introduce particle physicists to astrophysical techniques. These techniques can help us understand certain phenomena important to particle physics that are currently impossible to address using standard particle physics experimental techniques. As the subject matter is vast, compromises are necessary in order to convey the central ideas to the reader. Many general references are included for those who want to learn more. The paragraphs below elaborate on the structure of these lectures. I hope this discussion will clarify my motivation and make the lectures easier to follow. The lectures begin with a brief review of more theoretical ideas. First, elements of general relativity are reviewed, concentrating on those aspects that are needed to understand compact stellar objects (white dwarf stars, neutron stars, and black holes). I then review the equations of state of these objects, concentrating on the simplest standard models from astrophysics. After these mathematical preliminaries, Sec. 2(c) discusses 'The End State of Stars'. Most of this section also uses the simplest standard models. However, as these lectures are for particle physicists, I also discuss some of the more recent approaches to the equation of state of very dense compact objects. These particle-physics-motivated equations of state can dramatically change how we view the formation of black holes. Section 3 focuses on the properties of the objects that we want to characterize and measure. X-ray binary systems and Active Galactic Nuclei (AGN) are stressed because the lectures center on understanding very dense stellar objects, black hole candidates (BHCs), and their accompanying high gravitational fields. The use of x-ray timing and gamma-ray experiments is also introduced in this section. Sections 4 and 5 review information from x-ray and gamma-ray experiments. These sections also discuss the current state of the art in x-ray and gamma-ray satellite

  20. High-Field Accelerator Magnets Beyond LHC

    CERN Document Server

    Devred, Arnaud

    2003-01-01

    The LHC magnet R&D Program has shown that the limit of NbTi technology at 1.8 K was in the range 10 to 10.5 T. Hence, to go beyond the 10-T threshold, it is necessary to change of superconducting material. Given the state of the art in HTS, the only serious candidate is Nb3Sn. A series of dipole magnet models built at Twente University and LBNL and a vigorous program underway at FNAL have demonstrated the feasibility of Nb3Sn magnet technology. The next step is to bring this technology to maturity, which requires further conductor and conductor insulation development and a simplification of manufacturing processes. After outlining a roadmap to address outstanding issues, we evoke the US proposal for a second generation of LHC Insertion Region (IR) magnets and the Next European Dipole (NED) initiative promoted by the European Steering Group on Accelerator R&D (ESGARD).

  1. Summer school in the field of Space Technologies: A novel approach for teenage education

    Science.gov (United States)

    Dolea, Paul; Vladut Dascal, Paul

    2014-05-01

    This paper presents the main practical aspects regarding the organization of a summer school in the field of Space Technologies and Radio Science. This one-week summer school is aimed for education of teenagers between 12 and 16 years. Currently, the summer school reached its third edition. During this educational activities some especially designed prototype equipments were used with the main purpose of educating adolescents towards a scientific career in the field of Space Technologies and Radio Science. The main equipments and associated experiments are presented as follows: 1. A teaching purpose radio telescope emphasizing the working principle of professional radio telescopes. The experiments were focused on scanning the sky for identifying the positions of geostationary satellites and the Sun. 2. A weather satellite reception equipment used for downloading real-time APT (Automatic Picture Transmission) weather data from NOAA (National Oceanic and Atmospheric Administration) weather satellite fleet. The visual images were used for emphasizing the clouds and cloud systems over Europe. 3. A prototype equipment for receiving electromagnetic waves in the field of VLF (Very Low Frequency) with the purpose of analyzing the electromagnetic radio frequency spectrum. The main emphasized phenomenons in the VLF band (3 kHz - 30 kHz) are related to radio transmitters, electrical discharges in the atmosphere (lightning) and the electromagnetic pollution. 4. An equipment designed for initiating teenagers in the field of radio communication. This equipment was used for transmission and reception of images and sound over a distance of few kilometers, by using high-gain directional antennas. 5. Other sets of experiments were undertaken with the main purpose of mapping the countryside area in which the experiments had taken place. For this activity GPS devices were used. This paper may be considered a practical guideline for those who want to attract young students towards a

  2. Threats to ultra-high-field MRI

    Science.gov (United States)

    Le Bihan, Denis

    2009-08-01

    In 2004 the European Commission (EC) adopted a directive restricting occupational exposure to electromagnetic fields. This directive (2004/40/CE), which examines the possible health risks of the electromagnetic fields from mobile phones, Wi-Fi, Bluetooth and other devices, concluded that upper limits on radiation and applied electromagnetic fields are necessary to prevent workers from suffering any undue acute health effects. But although not initially intended, the biggest impact of the directive could be on magnetic resonance imaging (MRI), which is used in hospitals worldwide to produce images of unrivalled quality of the brain and other soft tissues.

  3. High Precision Fiber SINS with Spin Technology

    Institute of Scientific and Technical Information of China (English)

    孙伟; 孙枫; 王大雪

    2013-01-01

    Fiber strapdown inertial navigation system (FSINS) is presently used in several applications related to marine navigation. However, the absolute position from FSINS contains the error that increases with time, which prevents its long-term use for the ship cruise. In order to improve the performance of FSINS based on our present inertial sensors, the spin technology was proposed in the system to mitigate the navigation errors and a prototype of the proposed system was developed in Navigation Lab. The prototype contains the IMU, temperature controller, rotating configuration, navigation and I/O electronics group, control and display, power supply subsystem and other modules. In the proposed spin technology, the IMU is rotated back and forth in azimuth through four orthogonal positions relative to the ship’s longitudinal axis. Experimental testing was conducted for the prototype in the laboratory and the results showed that the RFSINS’s navigation performance is improved 10 times.

  4. Global climate change: Mitigation opportunities high efficiency large chiller technology

    Energy Technology Data Exchange (ETDEWEB)

    Stanga, M.V.

    1997-12-31

    This paper, comprised of presentation viewgraphs, examines the impact of high efficiency large chiller technology on world electricity consumption and carbon dioxide emissions. Background data are summarized, and sample calculations are presented. Calculations show that presently available high energy efficiency chiller technology has the ability to substantially reduce energy consumption from large chillers. If this technology is widely implemented on a global basis, it could reduce carbon dioxide emissions by 65 million tons by 2010.

  5. National High Magnetic Field Laboratory (NHMFL)

    Data.gov (United States)

    Federal Laboratory Consortium — The Pulsed Field Program is located in Northern New Mexico at Los Alamos National Laboratory. The user program is designed to provide researchers with a balance of...

  6. National High Magnetic Field Laboratory (NHMFL)

    Data.gov (United States)

    Federal Laboratory Consortium — The Pulsed Field Program is located in Northern New Mexico at Los Alamos National Laboratory. The user program is designed to provide researchers with a balance of...

  7. High-Speed and Wide-Field Photometry with TORTORA

    Directory of Open Access Journals (Sweden)

    G. Greco

    2010-01-01

    Full Text Available We present the photometric analysis of the extended sky fields observed by the TORTORA optical monitoring system. The technology involved in the TORTORA camera is based on the use of a fast TV-CCD matrix with an image intensifier. This approach can both significantly reduce the readout noise and shorten the focal length following to monitor relatively large sky regions with high temporal resolution and adequate detection limit. The performance of the system has been tested using the relative magnitudes of standard stars by means of long image sequences collected at different airmasses and at various intensities of the moon illumination. As expected from the previous laboratory measurements, artifact sources are negligible and do not affect the photometric results. The following analysis is based on a large sample of images acquired by the TORTORA instrument since July 2006.

  8. Technology and Economic Assessment of Innovative Field Drainage Technologies in Denmark

    DEFF Research Database (Denmark)

    Gachango, Florence Gathoni

    technologies, and their willingness and extent of trading-off the existing farm management nutrient reduction measures with constructed wetland technology, iii) the cost-effectiveness of surface flow constructed wetlands, and iv) the strategies of incorporating the filter technologies into policy measures....... Overall, the findings in this thesis indicate a potential for integration of the filter technologies into nutrient reduction measures....

  9. High efficiency low cost GaAs/Ge cell technology

    Science.gov (United States)

    Ho, Frank

    1990-01-01

    Viewgraphs on high efficiency low cost GaAs/Ge cell technology are presented. Topics covered include: high efficiency, low cost GaAs/Ge solar cells; advantages of Ge; comparison of typical production cells for space applications; panel level comparisons; and solar cell technology trends.

  10. Space Technology 5 Multi-point Measurements of Near-Earth Magnetic Fields: Initial Results

    Science.gov (United States)

    Slavin, James A.; Le, G.; Strangeway, R. L.; Wang, Y.; Boardsen, S.A.; Moldwin, M. B.; Spence, H. E.

    2007-01-01

    The Space Technology 5 (ST-5) mission successfully placed three micro-satellites in a 300 x 4500 km dawn-dusk orbit on 22 March 2006. Each spacecraft carried a boom-mounted vector fluxgate magnetometer that returned highly sensitive and accurate measurements of the geomagnetic field. These data allow, for the first time, the separation of temporal and spatial variations in field-aligned current (FAC) perturbations measured in low-Earth orbit on time scales of approximately 10 sec to 10 min. The constellation measurements are used to directly determine field-aligned current sheet motion, thickness and current density. In doing so, we demonstrate two multi-point methods for the inference of FAC current density that have not previously been possible in low-Earth orbit; 1) the "standard method," based upon s/c velocity, but corrected for FAC current sheet motion, and 2) the "gradiometer method" which uses simultaneous magnetic field measurements at two points with known separation. Future studies will apply these methods to the entire ST-5 data set and expand to include geomagnetic field gradient analyses as well as field-aligned and ionospheric currents.

  11. Developments at the High Field Magnet Laboratory in Nijmegen

    Science.gov (United States)

    Perenboom, J. A. A. J.; Maan, J. C.; van Breukelen, M. R.; Wiegers, S. A. J.; den Ouden, A.; Wulffers, C. A.; van der Zande, W. J.; Jongma, R. T.; van der Meer, A. F. G.; Redlich, B.

    2013-03-01

    The High Field Magnet Laboratory at the Radboud University Nijmegen is rapidly expanding its capabilities. The developments encompass both organizational changes and new possibilities for research. The organization of the HFML was strengthened as a consequence of stronger participation of the Foundation for Fundamental Research on Matter (FOM), and an increase of the core-funding. This change makes that HFML is now considered on a national level as large research facility that operates at an international scale. At the same time work is underway to build new and powerful magnets, and provide electromagnetic radiation for magneto-spectroscopic studies. Electromagnetic radiation in the infrared and far-infrared spectrum will soon be available in the HFML with wavelengths between 3 μm and 1.5 mm, produced by the `FELIX' facility, comprising the long-wavelength free electron laser `FLARE' that in September 2011 produced its first light and the free electron lasers that have been moved from Rijnhuizen to Nijmegen. In magnet technology great strides are made to make magnets available for the user community with unprecedented performance: late in 2012 we hope to commission a new all-resistive magnet system that will generate a steady magnetic field as high as 38 T, by fully exploiting the maximum power of the installation, i.e. 20 MW, and using all available improvements in the design and construction of `Florida-Bitter' resistive magnets. We are also well underway with the design of a 45 T hybrid magnet system, using Nb3Sn superconductors and wind-and-react Cable-in-Conduit technology.

  12. Toward a model for field-testing patient decision-support technologies : a qualitative field-testing study

    NARCIS (Netherlands)

    Evans, R.; Elwyn, G.; Edwards, A.; Watson, E.; Austoker, J.; Grol, R.P.T.M.

    2007-01-01

    BACKGROUND: Field-testing is a quality assurance criterion in the development of patient decision-support technologies (PDSTs), as identified in the consensus statement of the International Patient Decision Aids Standards Collaboration. We incorporated field-testing into the development of a Web-bas

  13. Field Demonstration of Electro-Scan Defect Location Technology for Condition Assessment of Wastewater Collection Systems

    Science.gov (United States)

    The purpose of the field demonstration program is to gather technically reliable cost and performance information on selected condition assessment technologies under defined field conditions. The selected technologies include zoom camera, electro-scan (FELL-41), and a multi-sens...

  14. Development of high temperature superconductors for magnetic field applications

    Energy Technology Data Exchange (ETDEWEB)

    Larbalestier, D.C.

    1991-12-31

    The key requirement for magnetic field applications of high temperature superconductor (HTS) materials is to have conductors with high transport critical current density available for magnet builders. After 3 or 4 years of being without any such object, conductor makers have had recent success in producing simple conductor prototypes. These have permitted the construction of simple HTS magnets having self fields exceeding 1 tesla at 4K. Thus the scientific feasibility of making powerful HTS magnets has been demonstrated. Attention to the technological aspects of making HTS conductors for magnets with strong flux pinning and reduced superconducting granularity is now sensible and attractive. However, extrinsic defects such as filament sausaging, cracking, misaligned grains and other perturbation to long range current flow must be controlled at a low level if the benefit of intrinsic improvements to the critical current density is to be maintained in the conductor form. Due to the great complexity of the HTS materials, there is sometimes confusion as to whether a given sample has an intrinsically or extrinsically limited critical current density. Systematic microstructure variation experiments and resistive transition analysis are shown to be particularly helpful in this phase of conductor development.

  15. Development of high temperature superconductors for magnetic field applications

    Energy Technology Data Exchange (ETDEWEB)

    Larbalestier, D.C.

    1991-01-01

    The key requirement for magnetic field applications of high temperature superconductor (HTS) materials is to have conductors with high transport critical current density available for magnet builders. After 3 or 4 years of being without any such object, conductor makers have had recent success in producing simple conductor prototypes. These have permitted the construction of simple HTS magnets having self fields exceeding 1 tesla at 4K. Thus the scientific feasibility of making powerful HTS magnets has been demonstrated. Attention to the technological aspects of making HTS conductors for magnets with strong flux pinning and reduced superconducting granularity is now sensible and attractive. However, extrinsic defects such as filament sausaging, cracking, misaligned grains and other perturbation to long range current flow must be controlled at a low level if the benefit of intrinsic improvements to the critical current density is to be maintained in the conductor form. Due to the great complexity of the HTS materials, there is sometimes confusion as to whether a given sample has an intrinsically or extrinsically limited critical current density. Systematic microstructure variation experiments and resistive transition analysis are shown to be particularly helpful in this phase of conductor development.

  16. Electronic data capture platform for clinical research based on mobile phones and near field communication technology.

    Science.gov (United States)

    Morak, Jürgen; Schwetz, Verena; Hayn, Dieter; Fruhwald, Friedrich; Schreier, Gunter

    2008-01-01

    Electronic data capture systems support data acquisition for clinical research and enable the evaluation of new investigational medical devices. In case of evaluating a device the most challenging part is the user interface i.e. the solution how to acquire the data within a clinical setting and to synchronize them with a web-based data centre. The aim of this paper is to describe the development of an electronic data capture system with a mobile data input solution based on mobile phones and Near Field Communication technology. This system was evaluated within a real clinical setting and demonstrated high usability, security and reliability.

  17. Field Plate Optimization in Low-Power High-Gain Source-Gated Transistors

    NARCIS (Netherlands)

    Sporea,R.A.; Trainor, M.J.; Young, N.D.; Shannon, J.M.; Silva, S.R.P.

    2012-01-01

    Source-gated transistors (SGTs) have potentially very high output impedance and low saturation voltages, which make them ideal as building blocks for high performance analog circuits fabricated in thin-film technologies. The quality of the saturation is greatly influenced by the design of the field-

  18. Field Validation of Visual Cleaning Performance Indicator (VCPI) Technology

    Science.gov (United States)

    2007-08-31

    test panels. Panels sets included 2024-T3 aluminum alloy sheet (Air Force platform), and primer coated HY80 steel alloy (Navy platform). 1. Weight...Cleaning Petfmmance Indicator (VCPI) tedmology as a means to verify surface cleanliness on aluminum and painted steel alloys. The VCPI technology...the surface cleanliness of unpainted structures fabricated from aluminum and steel alloys. In concept, the VCPI technology represents an innovative

  19. 7 CFR 12.22 - Highly erodible field determination criteria.

    Science.gov (United States)

    2010-01-01

    ... Section 12.22 Agriculture Office of the Secretary of Agriculture HIGHLY ERODIBLE LAND AND WETLAND CONSERVATION Highly Erodible Land Conservation § 12.22 Highly erodible field determination criteria. (a... included in an approved conservation plan for the entire highly erodible field....

  20. Idea Generation in Highly Institutionalized Fields

    DEFF Research Database (Denmark)

    Agoguè, Marine; Boxenbaum, Eva

    , bricolage and innovative design reasoning. We identify metaphors and bricolage as central to the subconscious system, which play an important role in maintaining the field frame, whereas conceptual blending and innovative design reasoning can be instrumental in generating ideas in the conscious system...

  1. Highly educated but in the wrong field?

    DEFF Research Database (Denmark)

    Reimer, David; Steinmetz, Stephanie

    2009-01-01

    and non-linear decomposition analyses generally confirm our expectation that the field of study explains a sizable portion of the gender gap in unemployment and low-status jobs in both countries. However, the level of tertiary degree earned explains only part of the female disadvantage behind holding...

  2. High Field Magnetization of Tb Single Crystals

    DEFF Research Database (Denmark)

    Roeland, L. W.; Cock, G. J.; Lindgård, Per-Anker

    1975-01-01

    The magnetization of Tb single crystals was measured in magnetic fields to 34T along the hard direction at temperature of 1.8, 4.2, 65.5 and 77K, and along with easy direction at 4.2 and 77K. The data are compared with the results of a self-consistent spin wave calculation using a phenomenological...

  3. Field Test and Evaluation of Engineered Biomineralization Technology for Sealing Existing Wells

    Energy Technology Data Exchange (ETDEWEB)

    Cunningham, Alfred [Montana State Univ., Bozeman, MT (United States)

    2015-12-21

    This research project addresses one of the goals of the U.S. Department of Energy (DOE) Carbon Storage Program (CSP) aimed at developing Advanced Wellbore Integrity Technologies to Ensure Permanent Geologic Carbon Storage. The technology field-tested in this research project is referred to as microbially induced calcite precipitation (MICP), which utilizes a biologically-based process to precipitate calcium carbonate. If properly controlled MICP can successfully seal fractures, high permeability zones, and compromised wellbore cement in the vicinity of wellbores and in nearby caprock, thereby improving the storage security of geologically-stored carbon dioxide. This report describes an MICP sealing field test performed on a 24.4 cm (9.625 inch) diameter well located on the Gorgas Steam Generation facility near Jasper, Alabama. The research was aimed at (1) developing methods for delivering MICP promoting fluids downhole using conventional oil field technologies and (2) assessing the ability of MICP to seal cement and formation fractures in the near wellbore region in a sandstone formation. Both objectives were accomplished successfully during a field test performed during the period April 1-11, 2014. The test resulted in complete biomineralization sealing of a horizontal fracture located 340.7 m (1118 feet) below ground surface. A total of 24 calcium injections and six microbial inoculation injections were required over a three day period in order to achieve complete sealing. The fractured region was considered completely sealed when it was no longer possible to inject fluids into the formation without exceeding the initial formation fracture pressure. The test was accomplished using conventional oil field technology including an 11.4 L (3.0 gallon) wireline dump bailer for injecting the biomineralization materials downhole. Metrics indicating successful MICP sealing included reduced injectivity during seal formation, reduction in pressure falloff, and

  4. Coherent DWDM technology for high speed optical communications

    Science.gov (United States)

    Saunders, Ross

    2011-10-01

    The introduction of coherent digital optical transmission enables a new generation of high speed optical data transport and fiber impairment mitigation. An initial implementation of 40 Gb/s coherent systems using Dual Polarization Quadrature Phase Shift Keying (DP-QPSK) is already being installed in carrier networks. New systems running at 100 Gb/s DP-QPSK data rate are in development and early technology lab and field trial phase. Significant investment in the 100 Gb/s ecosystem (optical components, ASICs, transponders and systems) bodes well for commercial application in 2012 and beyond. Following in the footsteps of other telecommunications fields such as wireless and DSL, we can expect coherent optical transmission to evolve from QPSK to higher order modulations schemes such as Mary PSK and/or QAM. This will be an interesting area of research in coming years and poses significant challenges in terms of electro-optic, DSP, ADC/DAC design and fiber nonlinearity mitigation to reach practical implementation ready for real network deployments.

  5. Submicron CMOS technologies for high energy physics and space applications

    CERN Document Server

    Anelli, G; Faccio, F; Heijne, Erik H M; Jarron, Pierre; Kloukinas, Kostas C; Marchioro, A; Moreira, P; Snoeys, W

    2001-01-01

    The radiation environment present in some of today's High-Energy Physics (HEP) experiments and in space has a detrimental influence on the integrated circuits working in these environments. Special technologies, called radiation hardened, have been used in the past to prevent the radiation-induced degradation. In the last decades, the market of these special technologies has undergone a considerable shrinkage, rendering them less reliably available and far more expensive than today's mainstream technologies. An alternative approach is to use a deep submicron CMOS technology. The most sensitive part to radiation effects in a MOS transistor is the gate oxide. One way to reduce the effects of ionizing radiation in the gate oxide is to reduce its thickness, which is a natural trend in modern technologies. Submicron CMOS technologies seem therefore a good candidate for implementing radiation-hardened integrated circuits using a commercial, inexpensive technology. Nevertheless, a certain number of radiation-induced...

  6. High throughput phenotyping to accelerate crop breeding and monitoring of diseases in the field.

    Science.gov (United States)

    Shakoor, Nadia; Lee, Scott; Mockler, Todd C

    2017-08-01

    Effective implementation of technology that facilitates accurate and high-throughput screening of thousands of field-grown lines is critical for accelerating crop improvement and breeding strategies for higher yield and disease tolerance. Progress in the development of field-based high throughput phenotyping methods has advanced considerably in the last 10 years through technological progress in sensor development and high-performance computing. Here, we review recent advances in high throughput field phenotyping technologies designed to inform the genetics of quantitative traits, including crop yield and disease tolerance. Successful application of phenotyping platforms to advance crop breeding and identify and monitor disease requires: (1) high resolution of imaging and environmental sensors; (2) quality data products that facilitate computer vision, machine learning and GIS; (3) capacity infrastructure for data management and analysis; and (4) automated environmental data collection. Accelerated breeding for agriculturally relevant crop traits is key to the development of improved varieties and is critically dependent on high-resolution, high-throughput field-scale phenotyping technologies that can efficiently discriminate better performing lines within a larger population and across multiple environments. Copyright © 2017. Published by Elsevier Ltd.

  7. NASA(Field Center Based) Technology Commercialization Centers

    Science.gov (United States)

    1995-01-01

    Under the direction of the IC(sup 2) Institute, the Johnson Technology Commercialization Center has met or exceeded all planned milestones and metrics during the first two and a half years of the NTCC program. The Center has established itself as an agent for technology transfer and economic development in- the Clear Lake community, and is positioned to continue as a stand-alone operation. This report presents data on the experimental JTCC program, including all objective measures tracked over its duration. While the metrics are all positive, the data indicates a shortage of NASA technologies with strong commercial potential, barriers to the identification and transfer of technologies which may have potential, and small financial return to NASA via royalty-bearing licenses. The Center has not yet reached the goal of self-sufficiency based on rental income, and remains dependent on NASA funding. The most important issues raised by the report are the need for broader and deeper community participation in the Center, technology sourcing beyond JSC, and the form of future funding which will be appropriate.

  8. High-field magnetization of dilute rare earths in yttrium

    DEFF Research Database (Denmark)

    Touborg, P.; Høg, J.; Cock, G. J.;

    1974-01-01

    Magnetization measurements have been performed on single crystals of Y containing small amounts of Tb, Dy, or Er at 4.2 K in fields up to 295 × 105 A/m (370 kOe). Crystal-field and molecular-field parameters obtained from measurements of the initial susceptibility versus temperature give...... a satisfactory quantitative account of the high-field magnetization. This includes characteristic features due to the crossing and mixing of crystal-field levels....

  9. Application of new geological modeling technology in secondary development in Daqing oil field

    Science.gov (United States)

    Li, C. L.; Zhang, J. H.; Li, H. K.; Liu, C.

    2016-08-01

    The reconfiguration on underground geology system is one of the key techniques for secondary development in Daqing oil field. The geological modeling is the unique method to characterize new knowledge system of reservoir. The development history of maturing field is long. The structure of maturing field is complex and the distribution of oil remaining is highly scattered. The difficulty of adjustment and potential tapping is great. In viewing of demand for secondary development, the strategies and methods of geological modeling are proposed. According to the characteristics that many faults crosscut each other, the clue of fractional simulation—key horizon controlling—overall structural modeling is carried out to accurately and effectively build fine structural models. In order to approximate the real microfacies simulation effect, microfacies modeling technology of multiple iterations and geology tendency under vertical and lateral geology tendency constraint is used. And the attribute models could approximate the real parametric distribution. Moreover, in viewing of the key and potential reservoir sand, the countermeasure on configuration modeling by different stochastic simulation methods and step simulation is proposed to rapidly build geologic models. The geologic models are scientific and feasible. The above-mentioned countermeasures and methods have been used in secondary development of Daqing oilfield and the effect was well. This new technology presents directive sense.

  10. High-field plasma acceleration in a high-ionization-potential gas.

    Science.gov (United States)

    Corde, S; Adli, E; Allen, J M; An, W; Clarke, C I; Clausse, B; Clayton, C E; Delahaye, J P; Frederico, J; Gessner, S; Green, S Z; Hogan, M J; Joshi, C; Litos, M; Lu, W; Marsh, K A; Mori, W B; Vafaei-Najafabadi, N; Walz, D; Yakimenko, V

    2016-06-17

    Plasma accelerators driven by particle beams are a very promising future accelerator technology as they can sustain high accelerating fields over long distances with high energy efficiency. They rely on the excitation of a plasma wave in the wake of a drive beam. To generate the plasma, a neutral gas can be field-ionized by the head of the drive beam, in which case the distance of acceleration and energy gain can be strongly limited by head erosion. Here we overcome this limit and demonstrate that electrons in the tail of a drive beam can be accelerated by up to 27 GeV in a high-ionization-potential gas (argon), boosting their initial 20.35 GeV energy by 130%. Particle-in-cell simulations show that the argon plasma is sustaining very high electric fields, of ∼150 GV m(-1), over ∼20 cm. The results open new possibilities for the design of particle beam drivers and plasma sources.

  11. Integration of Modern Information Technologies in the Field of Financial Accounting

    Directory of Open Access Journals (Sweden)

    Adrian LUPASC

    2011-11-01

    Full Text Available Financial accounting activities are currently influenced as many other important areas that characterize and surrounds the activities within each economic entity, the avalanche of modern information technologies, which are able to improve specific business processes and to ensure future business success. Approach analysis of the impact of new technologies on this field should be so as a starting point to identify the opportunities and the benefits they would bring to specific activities. Information and communication technologies are in use both at the individual level and at the organizational level with the flexibility of the increasingly high, using a huge volume of information that financial accounting with direct impact on all human activities. Basically, it has already made the passage to a new stage:the global network society, whose main features are digitizing and interconnectivity. In this sense, this paper has as its main objective of examining the impact of modern information technologies may have on the financial accounting domain and the identification and submission directions for their integration within organizations.

  12. High Technology and International Labour Markets.

    Science.gov (United States)

    Carnoy, Martin

    1985-01-01

    The author examines the impact of "high-tech" industries on labor markets, the division of labor and the organization of work, and the policy options open to societies for dealing with the effects. (CT)

  13. Field application of freezing technology for social infrastructures

    Institute of Scientific and Technical Information of China (English)

    EunChul Shin; YuRa Gong; CheolGyu Jeong

    2015-01-01

    There are numerous methods to prevent seepage flow and ground improvement methodologies such as cement grouting, sheet piling, and the membrane method. In this paper, we present case histories of freezing technology applications in the construction of a deep tunnel sewerage system, undersea highway tunnel, and liquefied natural gas tank. Heaving pressure measurements for various soil types around a liquefied natural tank are compared with existing data. In this paper, we present temperature variations at the bottom and side of a liquefied natural gas tank. Our findings show that ground-freezing technology is very effective in controlling ground water infiltration into underground structures as well providing soil reinforcement in the soft ground.

  14. Trend on High-speed Power Line Communication Technology

    Science.gov (United States)

    Ogawa, Osamu

    High-speed power line communication (PLC) is useful technology to easily build the communication networks, because construction of new infrastructure is not necessary. In Europe and America, PLC has been used for broadband networks since the beginning of 21th century. In Japan, high-speed PLC was deregulated only indoor usage in 2006. Afterward it has been widely used for home area network, LAN in hotels and school buildings and so on. And recently, PLC is greatly concerned as communication technology for smart grid network. In this paper, the author surveys the high-speed PLC technology and its current status.

  15. Success in large high-technology projects: What really works?

    Science.gov (United States)

    Crosby, P.

    2014-08-01

    Despite a plethora of tools, technologies and management systems, successful execution of big science and engineering projects remains problematic. The sheer scale of globally funded projects such as the Large Hadron Collider and the Square Kilometre Array telescope means that lack of project success can impact both on national budgets, and collaborative reputations. In this paper, I explore data from contemporary literature alongside field research from several current high-technology projects in Europe and Australia, and reveal common `pressure points' that are shown to be key influencers of project control and success. I discuss the how mega-science projects sit between being merely complicated, and chaotic, and explain the importance of understanding multiple dimensions of project complexity. Project manager/leader traits are briefly discussed, including capability to govern and control such enterprises. Project structures are examined, including the challenge of collaborations. I show that early attention to building project resilience, curbing optimism, and risk alertness can help prepare large high-tech projects against threats, and why project managers need to understand aspects of `the silent power of time'. Mission assurance is advanced as a critical success function, alongside the deployment of task forces and new combinations of contingency plans. I argue for increased project control through industrial-style project reviews, and show how post-project reviews are an under-used, yet invaluable avenue of personal and organisational improvement. Lastly, I discuss the avoidance of project amnesia through effective capture of project knowledge, and transfer of lessons-learned to subsequent programs and projects.

  16. EDUCATIONAL TECHNOLOGY IN PRACTICE Research and Practical Case Studies from the Field

    Directory of Open Access Journals (Sweden)

    Reviewed by Ozden SAHIN-IZMIRLI

    2010-10-01

    Full Text Available The book starts with an explanation of the reason why the terms found in the book are sometimes used in place of each other. The editors stated that when technological tools are used to establish an effective and productive study process in education, the concept of learning technology is used instead of educational technology. The editors of the book considers the field as complex and vague in terms of the fact that the meanings of the concepts are close to each other in the field of educational technology and that the field provides an opportunity for inter-disciplinary studies. However, according to the editors, this vagueness and complexity shows the superiority of the field. This superiority is explained with the fact that the field of educational technology requires upper-level skills of problem solving and critical thinking and that it presents a multi-dimensional and inter-disciplinary study field. The book was edited by Wanjira Kinuthia and Steward Marshall. Wanjira Kinuthia, an assistant professor at Georgia State University, works in the Department of Middle-Secondary Education and Instructional Technology. Steward Marshall, a professor at the University of the West Indies, is the director of the Distance Education Centre. The book includes five sections and 21 chapters. These sections are “Materials, Methods, and Modalities”, “Technology Implementation and Integration Issues”, “Student Engagement and Learning”, “Building Capacity”, “Using Technology for Performance Improvement and Productivity Enhancement”.

  17. Gender Differences in the Field of Information Security Technology Management: A Qualitative, Phenomenological Study

    Science.gov (United States)

    Johnson, Marcia L.

    2013-01-01

    This qualitative study explored why there are so few senior women in the information security technology management field and whether gender played a part in the achievement of women in the field. Extensive interviews were performed to capture the lived experiences of successful women in the field regarding the obstacles and common denominators of…

  18. Gender Differences in the Field of Information Security Technology Management: A Qualitative, Phenomenological Study

    Science.gov (United States)

    Johnson, Marcia L.

    2013-01-01

    This qualitative study explored why there are so few senior women in the information security technology management field and whether gender played a part in the achievement of women in the field. Extensive interviews were performed to capture the lived experiences of successful women in the field regarding the obstacles and common denominators of…

  19. Effect of Field Trip on Students' Academic Performance in Basic Technology in Ilorin Metropolis, Nigeria

    Science.gov (United States)

    Amosa, Abdul Ganiyu Alasela; Ogunlade, Oyeronke Olufunmilola; Atobatele, Adunni Suliat

    2015-01-01

    The use of field trip in teaching and learning helps to bring about effective and efficient learning in Basic Technology. Field trip is a group excursion away from the normal education environment for firsthand experience of an historic site or place of special interest. This study therefore was geared towards finding out the effect of field trip…

  20. Optimal Rules to Adopt High Technology under Uncertainty

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xiao-jun; LI Shi-min

    2006-01-01

    In the research of choosing the optimal timing for the high technology products,especially IT products to the market, most studies prefer to provide the scope or infimum of timing. In this paper, an optimal rule is adopted to guild the timing of high technology product to the market, this idea is illustrated through the theory of optimal stopping, and a high approach is developed to theoretical framework for timing decision. On this basis, a random programming model is established, in which the objective function is the expected profit to adopt high technology and the constraint condition is the successful probability over critical value α with all variables beyond the rule, and it is used to find the optimal timing of adopt high technology product.

  1. Nanometer lapping technology at high speed

    Institute of Scientific and Technical Information of China (English)

    YANG JianDong; TIAN ChunLin; WANG ChangXing

    2007-01-01

    In floating lapping with solid abrasives, the workpiece is taken as an isolated body. The forces that act on it are analyzed. A differential equation about the forces that act on it is set up, so the forces that act on it and its motion rule are received. Combining it with known lapping tool motion, the relative motion rule between the lapping tool and workpiece is determined too. According to the relative motion, the distribution of abrasives density is designed reasonably, which makes the lapping tool wear uniformly, which, in turn, avoids redressing the lapping tool, saves abrasives, and increases machining accuracy. Combining it with advantages in high speed lapping with solid abrasives, the low cost, high efficiency nanometer lapping at high speed is realized.

  2. Nanometer lapping technology at high speed

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In floating lapping with solid abrasives, the workpiece is taken as an isolated body. The forces that act on it are analyzed. A differential equation about the forces that act on it is set up, so the forces that act on it and its motion rule are received. Combining it with known lapping tool motion, the relative motion rule between the lapping tool and workpiece is determined too. According to the relative motion, the distribution of abrasives density is designed reasonably, which makes the lapping tool wear uniformly, which, in turn, avoids redressing the lapping tool, saves abra-sives, and increases machining accuracy. Combining it with advantages in high speed lapping with solid abrasives, the low cost, high efficiency nanometer lapping at high speed is realized.

  3. Technology of high-temperature organic coolant

    Energy Technology Data Exchange (ETDEWEB)

    Vorobei, M.P.; Makin, R.S.; Kuprienko, V.A. [and others

    1993-12-31

    A wide range of studies were carried out in RIAR on the problems connected with the use of high-temperature organic coolant at nuclear power plants. The work performed and successful experience gained in persistent operation of the ARBUS reactor confirmed the inherent safety characteristics, high operational reliability, as well as improved safety of stations with similar reactors. A large scope of studies were carried out at the ARBUS pilot reactor and loop with the organic coolant of the MIR reactor and a wide range of problems were solved. The studies are described.

  4. The Physics and Technology of Strong Magnetic Fields (Chapter 10),

    Science.gov (United States)

    2014-09-26

    capacitor bank was discharged. The solenoid was placed into a metal tube, which was equipped with a radial slot and an explosive surrounded by a ring...1) "Trap" of magnetic field; 2) Ring of explosive; 3) De- L_ l tonator; 4) Trigger; 5) Capacitor Iw bank . 3 ,. .,.’ . - *-’-- The strength of the...and the other, outside it. The initial magnetic field was monitored according to the magnitude of the discharge current of the capacitor bank ; a test

  5. Toward high-speed access technologies: results from MUSE

    Science.gov (United States)

    Wellen, Jeroen; Smets, Rob; Hellenthal, Wim; Lepley, Jason; Tsalamanis, Ioannis; Walker, Stuart; Ng'oma, Anthony; Rijckenberg, Gert-Jan; Koonen, Ton; Habel, Kai; Langer, Klaus-Dieter

    2006-10-01

    The European MUSE project, which aims to enable "MUlti Service and access Everywhere", studies architectures, technologies and business scenarios facilitating the deployment of new Broadband Access Networks and Services. This paper gives an overview and particularly discusses results of some of the high-speed access technologies that are developed.

  6. A Field Guide to Heidegger: Understanding "The Question Concerning Technology"

    Science.gov (United States)

    Waddington, David I.

    2005-01-01

    This essay serves as a guide for scholars, especially those in education, who want to gain a better understanding of Heidegger's essay, "The Question Concerning Technology". The paper has three sections: an interpretive summary, a critical commentary, and some remarks on Heidegger scholarship in education. Since Heidegger's writing style is rather…

  7. Field Trial of an Aerosol-Based Enclosure Sealing Technology

    Energy Technology Data Exchange (ETDEWEB)

    Harrington, Curtis [Univ. of California, Davis, CA (United States); Springer, David [Univ. of California, Davis, CA (United States)

    2015-09-01

    This report presents the results from several demonstrations of a new method for sealing building envelope air leaks using an aerosol sealing process developed by the Western Cooling Efficiency Center at UC Davis. The process involves pressurizing a building while applying an aerosol sealant to the interior. As air escapes through leaks in the building envelope, the aerosol particles are transported to the leaks where they collect and form a seal that blocks the leak. Standard blower door technology is used to facilitate the building pressurization, which allows the installer to track the sealing progress during the installation and automatically verify the final building tightness. Each aerosol envelope sealing installation was performed after drywall was installed and taped, and the process did not appear to interrupt the construction schedule or interfere with other trades working in the homes. The labor needed to physically seal bulk air leaks in typical construction will not be replaced by this technology. However, this technology is capable of bringing the air leakage of a building that was built with standard construction techniques and HERS-verified sealing down to levels that would meet DOE Zero Energy Ready Homes program requirements. When a developer is striving to meet a tighter envelope leakage specification, this technology could greatly reduce the cost to achieve that goal by providing a simple and relatively low cost method for reducing the air leakage of a building envelope with little to no change in their common building practices.

  8. The Outlook in Engineering-Related Technology Fields

    Science.gov (United States)

    Weeks, Peggie

    2009-01-01

    Community colleges have a long and impressive history of preparing a well-qualified technical workforce to meet the immediate and short-term needs of local and regional industries. Programs range from certificates in areas such as drafting, computer-aided design, and automotive technology to associate degrees in electrical and mechanical…

  9. Plasma instabilities in high electric fields

    DEFF Research Database (Denmark)

    Morawetz, K.; Jauho, Antti-Pekka

    1994-01-01

    We analyze nonequilibrium screening with nonequilibrium Green function techniques. By employing the generalized Kadanoff-Baym ansatz to relate the correlation function to the nonequilibrium distribution function, the latter of which is assumed to be a shifted Maxwellian, an analytically tractable...... expression is derived for the nonequilibrium dielectric function epsilon(K, omega). For certain values of momenta K and frequency omega, Imepsilon(K, omega) becomes negative, implying a plasma instability. This new instability exists only for strong electric fields, underlining its nonequilibrium origin....

  10. Expanding the classroom with educational technology: A case study of a Cuban polytechnic high school

    Directory of Open Access Journals (Sweden)

    Anne Leftwich

    2014-12-01

    Full Text Available Polytechnic instruction has a common place in the Cuban education system (Gasperini, 2000. In polytechnic institutions, teachers leverage technological tools to prepare students for labor market competences. This case study examined a polytechnic institution in Cuba to consider how teachers defined educational technology. Based on teacher questionnaire responses, site-based teacher interviews, and field observations, technology was primarily viewed as a method for student preparation. In other words, teachers used technology to prepare students for their future careers and the technology they will need to be successful in that career. The study found that teachers highly valued their technical pedagogical training, believed that the growing spaces were an integral part of their technology based instruction, and claimed that the limited resources was their greatest barrier to integrating ICT in the classroom.

  11. Technology of high temperature organic coolant

    Energy Technology Data Exchange (ETDEWEB)

    Makin, R.S.; Vorobei, M.P.; Kuprienko, V.A.; Starkov, V.A.; Tsykanov, V.A.; Checketkin, Y.V. [Research Institute of Atomic Reactors, Ulyanovsk (Russian Federation)

    1993-12-31

    Research has been performed on the problems related to the use of high temperature organic coolants in small and medium nuclear power plants. The work performed and also the experience of operating the ARBUS reactor confirmed the inherent safety features, reliability, and enhanced safety margins of the plants with this type of coolants. The advantages of this system and research highlights are presented.

  12. Technologies for highly miniaturized autonomous sensor networks

    NARCIS (Netherlands)

    Baert, K.; Gyselinckx, B.; Torfs, T.; Leonov, V.; Yazicioglu, F.; Brebels, S.; Donnay, S.; Vanfleteren, J.; Beyne, E.; Hoof, C. van

    2006-01-01

    Recent results of the autonomous sensor research program HUMAN++ will be summarized in this paper. The research program aims to achieve highly miniaturized and (nearly) autonomous sensor systems that assist our health and comfort. Although the application examples are dedicated to human monitoring/a

  13. Development of field welding technology for rails; Tetsudo rail no genchi yoyu yosetsu gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Okumura, M.; Karimine, K.; Uchino, K.; Yurioka, N. [Nippon Steel Corp., Tokyo (Japan)

    1995-02-28

    A new element technology is outlined which is for welding regular rails in the field and making a long rail. A new EAW (Enclosed Arc Welding) has been developed for the purpose of improving vibration and noise due to the local abrasion of the existing EAW and improving the deterioration of resistibility against rolling fatigue breakage and the generation of transverse fissure due to the high temperature liquefaction crack. It has been verified that a highly carbonized metal improves the local abrasion and the generation of crack. Problems were brought up, in the case of welding rails by thermit welding (TW) utilizing the reaction of Al powder and brown iron oxide, such that strength was rather small against the bending fatigue of a joint and that the soundness of internal property of a welded part was likely to fluctuate. A test was carried out concerning the latter problem, and it was revealed that the temperature to pour molten steel dropped, whether the Al compound was insufficient or excessive, possibly causing reaction defects. As a technology to replace EAW and TW techniques, an automatic welding was developed which combinedly used narrow groove electro-slag welding and gas sealed arc welding. Further, as an after-treatment of this technology, a method was developed to remove a weld overlay. 19 refs., 16 figs., 6 tabs.

  14. Technological evolution of high temperature superconductors

    OpenAIRE

    White, Jordan R.

    2015-01-01

    Approved for public release; distribution is unlimited High temperature superconducting (HTS) cables are currently being used in the commercial energy industry primarily for demonstration purposes and to evaluate the feasibility of large-scale implementation into the electric grid. While still in the evaluation stage, the U.S. Navy is finding the test results promising and is investigating its potential use for future electric ships to supply power to electric propulsion motors and possibl...

  15. The evolution of high-technology in China after 1978: Towards technological entrepreneurship

    NARCIS (Netherlands)

    M.J. Greeven (Mark)

    2004-01-01

    textabstractThe purpose of this paper is to describe the development of China’s science and technology, their related institutions and use in the business world since the reforms started in 1978. Special attention will be given to the re-integration of high-technology into the private sector and th

  16. The principles of ultra high pressure technology and its application ...

    African Journals Online (AJOL)

    The principles of ultra high pressure technology and its application in food processing/preservation: A review of ... African Journal of Biotechnology ... along the entire food chain, food preservation remains as necessary today as in the past.

  17. Field Trial of an Aerosol-Based Enclosure Sealing Technology

    Energy Technology Data Exchange (ETDEWEB)

    Harrington, Curtis [Univ. of California, Davis, CA (United States); Springer, David [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States)

    2015-09-01

    This report presents the results from several demonstrations of a new method for sealing building envelope air leaks using an aerosol sealing process developed by the Western Cooling Efficiency Center at UC Davis. The process involves pressurizing a building while applying an aerosol sealant to the interior. As air escapes through leaks in the building envelope, the aerosol particles are transported to the leaks where they collect and form a seal that blocks the leak. Standard blower door technology is used to facilitate the building pressurization, which allows the installer to track the sealing progress during the installation and automatically verify the final building tightness. Each aerosol envelope sealing installation was performed after drywall was installed and taped, and the process did not appear to interrupt the construction schedule or interfere with other trades working in the homes. The labor needed to physically seal bulk air leaks in typical construction will not be replaced by this technology.

  18. The Impact of Technology on High School Mathematics Curriculum

    Directory of Open Access Journals (Sweden)

    Cengiz Alacacı

    2014-02-01

    Full Text Available The infusion of technology into school mathematics has intensified in the last two decades. This article discusses the effects of this infusion on the mathematics curriculum. After a review of the different roles technology plays in mathematics and the diversity of the tools and their functions in teaching and learning mathematics, an epistemological perspective is offered to understand how technology could affect our cognition and perception while doing mathematics. With this background, specific examples are offered for the ways in which our curricular  goals are re-prioritized in algebra and geometry. The paper is concluded with a discussion of teachers' proficiency as a factor to promote effective use of technology  in the high school mathematics curriculum based on Beaudin &Bowers' (1997  PURIA model.Key Words: Technology, mathematics curriculum, algebra, geometry, high school

  19. Prospects of development of highly mineralized high-temperature resources of the Tarumovskoye geothermal field

    Science.gov (United States)

    Alkhasov, A. B.; Alkhasova, D. A.; Ramazanov, A. Sh.; Kasparova, M. A.

    2016-06-01

    The promising nature of integrated processing of high-temperature geothermal brines of the Tarumovskoye geothermal field is shown. Thermal energy of a geothermal brine can be converted to the electric power at a binary geothermal power plant (GPP) based on low-boiling working substance. The thermodynamic Rankine cycles are considered which are implemented in the GPP secondary loop at different evaporation temperatures of the working substance―isobutane. Among them, the most efficient cycle from the standpoint of attaining a maximum power is the supercritical one which is close to the so-called triangular cycle with an evaporation pressure of p e = 5.0 MPa. The used low-temperature brine is supplied from the GPP to a chemical plant, where main chemical components (lithium carbonate, burnt magnesia, calcium carbonate, and sodium chloride) are extracted from it according to the developed technology of comprehensive utilization of geothermal brines of chloride-sodium type. The waste water is delivered to the geotechnological complex and other consumers. For producing valuable inorganic materials, the electric power generated at the GPP is used. Owing to this, the total self-sufficiency of production and independence from external conditions is achieved. The advantages of the proposed geotechnological complex are the full utilization of the heat potential and the extraction of main chemical components of multiparameter geothermal resources. In this case, there is no need for reverse pumping, which eliminates the significant capital costs for building injection wells and a pumping station and the operating costs for their service. A characteristic of the modern state of the field and estimated figures of the integrated processing of high-temperature brines of well no. 6 are given, from which it follows that the proposed technology has a high efficiency. The comprehensive development of the field resources will make it possible to improve the economic structure of the

  20. Progress in advanced high temperature turbine materials, coatings, and technology

    Science.gov (United States)

    Freche, J. C.; Ault, G. M.

    1978-01-01

    Advanced materials, coatings, and cooling technology is assessed in terms of improved aircraft turbine engine performance. High cycle operating temperatures, lighter structural components, and adequate resistance to the various environmental factors associated with aircraft gas turbine engines are among the factors considered. Emphasis is placed on progress in development of high temperature materials for coating protection against oxidation, hot corrosion and erosion, and in turbine cooling technology. Specific topics discussed include metal matrix composites, superalloys, directionally solidified eutectics, and ceramics.

  1. 78 FR 70567 - Nationwide Use of High Frequency and Ultra High Frequency Active SONAR Technology; Final...

    Science.gov (United States)

    2013-11-26

    ...] Nationwide Use of High Frequency and Ultra High Frequency Active SONAR Technology; Final Programmatic... Programmatic Environmental Assessment (PEA) for the Nationwide Use of High Frequency (HF) and Ultra High Frequency (UHF) Sound Navigation and Ranging (SONAR) Technology and Finding of No Significant Impact (FONSI...

  2. Technology in the high entropy world.

    Science.gov (United States)

    Tambo, N

    2006-01-01

    Modern growing society is mainly driven by oils and may be designated "petroleum civilisation". However, the basic energy used to drive the global ecosystem is solar radiation. The amount of fossil energy consumption is minimal in the whole global energy balance. Economic growth is mainly controlled by the fossil (commercial) energy consumption rate in urban areas. Water and sanitation systems are bridging economical activities and global ecosystems. Therefore, vast amounts of high entropy solar energy should always be taken into account in the water industry. Only in urban/industrial areas where most of the GDP is earned, are commercial energy driven systems inevitably introduced with maximum effort for energy saving. A water district concept to ensure appropriate quality use with the least deterioration of the environment is proposed. In other areas, decentralised water and sanitation systems driven on soft energy paths would be recommended. A process and system designed on a high entropy energy system would be the foundation for a future urban metabolic system revolution for when oil-based energy become scarce.

  3. High Upper Critical Field and Irreversibility Field in MgB2 Coated-Conductor Fibers

    Science.gov (United States)

    2016-06-13

    High upper critical field and irreversibility field in MgB2 coated-conductor fibers V. Ferrando,a P. Orgiani,b A. V. Pogrebnyakov, J. Chen, Qi Li...show a high upper critical field of 55 T at 1.5 K and a high irreversibility field of 40 T at 1.5 K. The result demonstrates great potential of MgB2...using cryocoolers. Unlike high temperature superconductors where critical current den- sity Jc drops sharply across the grain boundary when the grains

  4. Materials for high vacuum technology, an overview

    CERN Document Server

    Sgobba, Stefano

    2007-01-01

    In modern accelerators stringent requirements are placed on materials of vacuum systems. Their physical and mechanical properties, machinability, weldability or brazeability are key parameters. Adequate strength, ductility, magnetic properties at room as well as low temperatures are important factors for vacuum systems of accelerators working at cryogenic temperatures, such as the Large Hadron Collider (LHC) under construction at CERN. In addition, baking or activation of Non-Evaporable Getters (NEG) at high temperatures impose specific choices of material grades of suitable tensile and creep properties in a large temperature range. Today, stainless steels are the dominant materials of vacuum constructions. Their metallurgy is extensively treated. The reasons for specific requirements in terms of metallurgical processes are detailed, in view of obtaining adequate purity, inclusion cleanliness, and fineness of the microstructure. In many cases these requirements are crucial to guarantee the final leak tightnes...

  5. Hybrid spherical particle field measurement based on interference technology

    Science.gov (United States)

    Sun, Jinlu; Zhang, Hongxia; Li, Jiao; Zhou, Ye; Jia, Dagong; Liu, Tiegen

    2017-03-01

    Interferometric particle imaging is widely used in particle size measurement. Conventional algorithms, which focus on single size particle fields, have difficulties in extracting each interference fringe in a hybrid spherical particle field due to the noise. To solve this problem, an iterative mean filter (IMF) algorithm is proposed. Instead of the specific mean filter template coefficient, the noise is reduced by iterating the calculation results under different template coefficients. The average value of the calculation results excluding the gross error is output as the final result. The effect of different template coefficients are simulated, furthermore, the value range of template coefficients has been analyzed. The interferogram of the hybrid spherical particle field from 21.3 µm to 57.9 µm is processed by the conventional algorithms with specific template coefficients of 2, 8, 12 and the IMF algorithm. The corresponding measurement errors are 17.22%, 10.69%, 9.04% and 5.11%. The experimental results show that the IMF algorithm would reduce measurement error, and could be potentially applied in particle field measurement.

  6. Enhancing Field Research Methods with Mobile Survey Technology

    Science.gov (United States)

    Glass, Michael R.

    2015-01-01

    This paper assesses the experience of undergraduate students using mobile devices and a commercial application, iSurvey, to conduct a neighborhood survey. Mobile devices offer benefits for enhancing student learning and engagement. This field exercise created the opportunity for classroom discussions on the practicalities of urban research, the…

  7. Enhancing Field Research Methods with Mobile Survey Technology

    Science.gov (United States)

    Glass, Michael R.

    2015-01-01

    This paper assesses the experience of undergraduate students using mobile devices and a commercial application, iSurvey, to conduct a neighborhood survey. Mobile devices offer benefits for enhancing student learning and engagement. This field exercise created the opportunity for classroom discussions on the practicalities of urban research, the…

  8. FIELD ANALYTICAL SCREENING PROGRAM: PCP METHOD - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The Field Analytical Screening Program (FASP) pentachlorophenol (PCP) method uses a gas chromatograph (GC) equipped with a megabore capillary column and flame ionization detector (FID) and electron capture detector (ECD) to identify and quantify PCP. The FASP PCP method is design...

  9. Strategic alliances and product development in high technology new firms: The moderating effect of technological capabilities

    NARCIS (Netherlands)

    Haeussler, C.; Patzelt, H.; Zahra, Shaker

    2012-01-01

    High technology new firms have extensively used strategic alliances to gain access to knowledge, resources and capabilities. However, given their inexperience and limited resources, these firms are vulnerable to their more established partners' potential opportunism. This raises the question: How

  10. Development and Prospects for Energy Saving Technology in Oil & Gas Fields, China

    Institute of Scientific and Technical Information of China (English)

    Chen Youwang; Yu Jiqing; Lin Ran; Zhu Yingru; Liu Feijun

    2010-01-01

    @@ Current state of energy saving technology in China's oil and gas fields System optimization To optimize the oil-gas field surface engineering system is critical to improve the efficiency of oil and gas field system.To adapt to the changes in development of old oil and gas fields, all oilfields are adjusted and reconstructed;a set of optimized and simplified modes and technical measures are developed.

  11. The socio-materiality of learning practices and implications for the field of learning technology

    Directory of Open Access Journals (Sweden)

    Aditya Johri

    2011-12-01

    Full Text Available Although the use of digital information technologies in education has becomecommonplace, there are few, if any, central guiding frameworks or theories thatexplicate the relationship between technology and learning practices. In thispaper, I argue that such a theoretical framework can assist scholars and practitionersalike by working as a conduit to study and design learning technologies.Towards this goal, I propose socio-materiality as a key theoretical construct withvaluable insights and implications for the field of learning technology. Sociomaterialityhelps balance the disproportionate attention given to either the socialimplications of technology use or the material aspects of technology design.Furthermore, I forward ‘socio-material bricolage' as a useful analytical frameworkto examine and design technology-infused learning environments. I illustratethe value of the framework by applying it to three case studies of formaland informal technology-based learning.

  12. Helicons, History, High Technology and Heliacs

    Science.gov (United States)

    Boswell, Rod

    1998-11-01

    Helicon waves depend basically on the Hall effect and propagate between the ion and electron gyro frequencies: they are whistlers masquerading under another name hence their history goes back to the great war and subsequently involved such people as Appleton, Hartree and Storey. Considerable experimental and theoretical research was carried out on linear propagation during the 1960's and at the end of the decade it was discovered that the wave could actually heat the plasma electrons and increase the ionisation rate considerably. Nothing much happened during the 1970's but in the early 1980's it was realised that this high density source could be used for processing thin films and an increasing number of papers were published, which continues to this day. The first experiments on using helicons to create and heat toroidal plasmas were carried out at the end of the 1980's in a small heliac. Recent experiments with helicon excitation in the large heliac H1 at the ANU have shown that the ion temperature increases with the wave power. This mystery is being actively investigated.

  13. Torsional oscillations of neutron stars with highly tangled magnetic fields

    CERN Document Server

    Sotani, Hajime

    2015-01-01

    To determine the frequencies of magnetic oscillations in the neutron stars with highly tangled magnetic fields, we derive the perturbation equations. We assume that the field strength of the global magnetic structure is so small that such fields are negligible compared with the tangled fields, which may still be far from a realistic configuration. Then, we systematically examine the spectra of the magnetic oscillations, as varying the magnetic field strength and stellar mass. The frequencies without crust elasticity are completely proportional to the strength of magnetic field, whose proportionality constant depends strongly on the stellar mass. On the other hand, the oscillation spectra with crust elasticity become more complicated, where the frequencies even for weak magnetic fields are different from the crustal torsional oscillations without magnetic fields. For discussing the spectra, the critical field strength can play an important role, which is determined in such a way that the shear velocity is equi...

  14. FIELD TESTING & OPTIMIZATION OF CO2/SAND FRACTURING TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    Raymond L. Mazza

    2004-11-30

    These contract efforts involved the demonstration of a unique liquid free stimulation technology which was, at the beginning of these efforts, in 1993 unavailable in the US. The process had been developed, and patented in Canada in 1981, and held promise for stimulating liquid sensitive reservoirs in the US. The technology differs from that conventionally used in that liquid carbon dioxide (CO{sub 2}), instead of water is the base fluid. The CO{sub 2} is pumped as a liquid and then vaporizes at reservoir conditions, and because no other liquids or chemicals are used, a liquid free fracture is created. The process requires a specialized closed system blender to mix the liquid CO{sub 2} with proppant under pressure. These efforts were funded to consist of up to 21 cost-shared stimulation events. Because of the vagaries of CO{sub 2} supplies, service company support and operator interest only 19 stimulation events were performed in Montana, New Mexico, and Texas. Final reports have been prepared for each of the four demonstration groups, and the specifics of those demonstrations are summarized. A summary of the demonstrations of a novel liquid-free stimulation process which was performed in four groups of ''Candidate Wells'' situated in Crockett Co., TX; San Juan Co., NM; Phillips Co., MT; and Blaine Co., MT. The stimulation process which employs CO{sub 2} as the working fluid and the production responses were compared with those from wells treated with conventional stimulation technologies, primarily N{sub 2} foam, excepting those in Blaine Co., MT where the reservoir pressure is too low to clean up spent stimulation liquids. A total of 19 liquid-free CO{sub 2}/sand stimulations were performed in 16 wells and the production improvements were generally uneconomic.

  15. Possible field-tuned superconductor-insulator transition in high-Tc superconductors: implications for pairing at high magnetic fields.

    Science.gov (United States)

    Steiner, M A; Boebinger, G; Kapitulnik, A

    2005-03-18

    The behavior of some high temperature superconductors (HTSC), such as La(2-x)Sr(x)CuO(4) and Bi(2)Sr(2-x)La(x)CuO(6 + delta), at very high magnetic fields, is similar to that of thin films of amorphous InOx near the magnetic-field-tuned superconductor-insulator transition. Analyzing the InOx data at high fields in terms of persisting local pairing amplitude, we argue by analogy that the local pairing amplitude also persists well into the dissipative state of the HTSCs, the regime commonly denoted as the "normal state" in very high magnetic field experiments.

  16. The Investigation of Field Plate Design in 500 V High Voltage NLDMOS

    Directory of Open Access Journals (Sweden)

    Donghua Liu

    2015-01-01

    Full Text Available This paper presents a 500 V high voltage NLDMOS with breakdown voltage (VBD improved by field plate technology. Effect of metal field plate (MFP and polysilicon field plate (PFP on breakdown voltage improvement of high voltage NLDMOS is studied. The coeffect of MFP and PFP on drain side has also been investigated. A 500 V NLDMOS is demonstrated with a 37 μm drift length and optimized MFP and PFP design. Finally the breakdown voltage 590 V and excellent on-resistance performance (Rsp = 7.88 ohm * mm2 are achieved.

  17. High magnetic field pulsars and magnetars a unified picture

    CERN Document Server

    Zhang, B; Zhang, Bing; Harding, Alice K.

    2000-01-01

    We propose a unified picture of high magnetic field radio pulsars and magnetars by arguing that they are all rotating high-field neutron stars, but have different orientations of their magnetic axes with respective to their rotation axes. In strong magnetic fields where photon splitting suppresses pair creation near the surface, the high-field pulsars can have active inner accelerators while the anomalous X-ray pulsars cannot. This can account for the very different observed emission characteristics of the anomalous X-ray pulsar 1E 2259+586 and the high field radio pulsar PSR J1814-1744. A predicted consequence of this picture is that radio pulsars having surface magnetic field greater than about $2\\times 10^{14}$ G should not exist.

  18. Web Based Technologies to Support High Level Process Maturity

    Directory of Open Access Journals (Sweden)

    A. V. Sharmila

    2013-07-01

    Full Text Available This paper discusses the uses of Web based Technologies to support High Level Process Maturity in an organization. It also provides an overview of CMMI, focusing on the importance of centralized data storage and data access for sustaining high maturity levels of CMMI. Further, elaboration is made on the web based technology, stressing that change over to Web Based Application is extremely helpful to maintain the centralized data repository, to collect data for process capability baseline, and to track process performance management, with reduced maintenance effort and ease of data access. A case study analysis of advantages of adopting Web Based Technology is also narrated. Finally the paper concludes that the sustenance of High level Process maturity can be achieved by adopting web application technology.

  19. Near field communications technology and the potential to reduce medication errors through multidisciplinary application

    LENUS (Irish Health Repository)

    O’Connell, Emer

    2016-07-01

    Patient safety requires optimal management of medications. Electronic systems are encouraged to reduce medication errors. Near field communications (NFC) is an emerging technology that may be used to develop novel medication management systems.

  20. Innovative technology in teaching foreign language of future specialists in the field of tourism

    Directory of Open Access Journals (Sweden)

    Мира Алексеевна Вчерашняя

    2010-03-01

    Full Text Available The article describes the major trends in tourism development in Kaliningrad, caused the actualization of the application of information and innovative technologies of foreign language teaching in vocational training in the field of tourism.

  1. Computational thermodynamics and informational technologies in the field of computer design of materials

    Directory of Open Access Journals (Sweden)

    Udovsky A.L.

    2002-01-01

    Full Text Available Computational thermodynamics and informational technologies in the field of computer desing of materials as well as appliance of CALPHAD method on resolution of thermodynamic problems are presented in this paper.

  2. The Need for an Effective Collaboration across Science, Technology, Engineering & Mathematics (STEM) Fields for a Meaningful Technological Development in Nigeria

    Science.gov (United States)

    Haruna, Umar Ibrahim

    2015-01-01

    Collaboration plays a major role in interdisciplinary activities among Science, Technology, Engineering & Mathematics (STEM) disciplines or fields. It also affects the relationships among cluster members on the management team. Although effective collaboration does not guarantee success among STEM disciplines, its absence usually assures…

  3. Radiofrequency solutions in clinical high field magnetic resonance

    NARCIS (Netherlands)

    Andreychenko, A.|info:eu-repo/dai/nl/341697672

    2013-01-01

    Magnetic resonance imaging (MRI) and spectroscopy (MRS) benefit from the sensitivity gain at high field (≥7T). However, high field brings also certain challenges associated with growing frequency and spectral dispersion. Frequency growth results in degraded performance of large volume radiofrequency

  4. High-order-harmonic generation from field-distorted orbitals

    DEFF Research Database (Denmark)

    Spiewanowski, Maciek; Etches, Adam; Madsen, Lars Bojer

    2013-01-01

    We investigate the effect on high-order-harmonic generation of the distortion of molecular orbitals by the driving laser field. Calculations for high-order-harmonic generation including orbital distortion are performed for N2. Our results allow us to suggest that field distortion is the reason why...

  5. High School Students' Representations and Understandings of Electric Fields

    Science.gov (United States)

    Cao, Ying; Brizuela, Bárbara M.

    2016-01-01

    This study investigates the representations and understandings of electric fields expressed by Chinese high school students 15 to 16 years old who have not received high school level physics instruction. The physics education research literature has reported students' conceptions of electric fields post-instruction as indicated by students'…

  6. Using virtual reality technology to include field operators in simulation and training

    Energy Technology Data Exchange (ETDEWEB)

    Nystad, E.; Strand, S. [OECD Halden Reactor Project (Norway)]. E-mail: espen.nystad@hrp.no

    2006-07-01

    By using virtual reality technology, field operators can be included in simulator training. A study has been performed where field operators could perform their activities in a virtual plant and communicate with a control room operator who was placed in a physical control room simulator. This paper describes the use of VR technology in the study and how the operators experienced interacting with the virtual plant. (author)

  7. Carbon Dioxide Flooding Technology Research and Field Test in Liuzan North Block

    Science.gov (United States)

    Zhang, Hanshi; Luo, Pingya; Sun, Lei; Fu, Zhijun

    2014-12-01

    The fault roots of Liuzan north block in Jidong oilfield of China have been long-term explored by solution gas drive. Recently, oil production declined rapidly because of shortage of formation energy and needing high water injection pressure. Carbon dioxide injection pressure is found to be generally low, and CO2 has good solubility in crude oil to supply formation energy and achieve high oil recovery efficiency. In this work, a pilot program of CO2 EOR technology was carried out. The slim tube test results showed that the minimal miscible pressure of Liuzan north block was 28.28 MPa. The injection parameters were optimized by numerical simulation method: the injection method was continuous, the slug size was 0.2 HCPV and the EOR efficiency was 7.23%. After two months of gas injection field test, the formation pressure of two gas injectors just increased by 14.02 MPa and 2.98 MPa, respectively, indicating that carbon dioxide could supply the formation energy effectively. 16 months after gas injection, the CO2 injection amount was 14640 t, and the oil increment was 16424 t. The present work demonstrates the potential applicability of CO2 flooding technology from high water injection reservoirs.

  8. Technology Acceptance in Social Work Education: Implications for the Field Practicum

    Science.gov (United States)

    Colvin, Alex Don; Bullock, Angela N.

    2014-01-01

    The exponential growth and sophistication of new information and computer technology (ICT) have greatly influenced human interactions and provided new metaphors for understanding the world. The acceptance and integration of ICT into social work field education are examined here using the technological acceptance model. This article also explores…

  9. Personal Professional Development Efforts Scale for Science and Technology Teachers Regarding Their Fields

    Science.gov (United States)

    Bilgin, Aysegül; Balbag, Mustafa Zafer

    2016-01-01

    This study has developed "Personal Professional Development Efforts Scale for Science and Technology Teachers Regarding Their Fields". Exploratory factor analysis of the scale has been conducted based on the data collected from 200 science and technology teachers across Turkey. The scale has been observed through varimax rotation method,…

  10. The Need for Increased Integration of Technology and Digital Skills in the Literacy Field in Canada

    Science.gov (United States)

    Eaton, Sarah Elaine

    2011-01-01

    This report examines the increasing need for literacy professionals and practitioners in Canada to integrate technology into literacy instruction. An overview of the current state of technology in education and workforce training is presented. This is contrasted with the literacy field, which remains heavily reliant on paper-based resources. The…

  11. High sensitive space electric field sensing based on micro fiber interferometer with field force driven gold nanofilm

    Science.gov (United States)

    Zhu, Tao; Zhou, Liming; Liu, Min; Zhang, Jingdong; Shi, Leilei

    2015-10-01

    The traditional electrical field sensing can be realized by utilizing electro-optic materials or liquid crystals, and has limitations of easy breakdown, free assembly and difficult measurement of low-frequency. Here, we propose a new method to realize safe measurement of spatial dynamic electric field by using a micro fiber interferometer integrated with gold nanofilm. The energy of the electric charge received through antenna forms the intrinsic electric field with two micro electrodes, one of which is the 120 nm gold film vibration beam micromachined by femtosecond lasers and integrated with the micro fiber. The change of the intrinsic electric field force due to the spatial electric field will cause the vibration of the film beam. By demodulating the output signal of the micro fiber interferometer, the electric field can be measured. We demonstrate the detectable frequency ranges from tens of Hz to tens of KHz, and the minimum electric field intensity is ~200 V/m at 1 KHz. Our electric field measurement technology combining optical fiber interference with gold nanostructures shows the advantages of security, high sensitivity, compact size, and multiplexed multi-point and remote detection.

  12. The Identification of Technology Platforms and Innovation Areas with High Regional Impact

    Directory of Open Access Journals (Sweden)

    Nataša Urbančíková

    2011-10-01

    Full Text Available The paper is focused on the process of identification of the technological platforms and innovation areas with high regional impact. The aim is to discover future fields of technological innovation which are having a high qualitative and quantitative demand of high potentials. The research has been undertaken within project Innovative Development of European Areas by fostering transnational Knowledge Development – IDEA/ 2CE1175P1 funded by Central Europe Programme. The aim of IDEA project is the development of an adequate strategy which enables the small and medium sized enterprises in the regions of Central Europe to face the increasing demand of high potentials with tested methods and instruments. The target group of IDEA project are so called “high potentials” in the engineering and scientific sector where future-oriented technologies are one of the main sources of innovation.

  13. A high power impulse magnetron sputtering model to explain high deposition rate magnetic field configurations

    Science.gov (United States)

    Raman, Priya; Weberski, Justin; Cheng, Matthew; Shchelkanov, Ivan; Ruzic, David N.

    2016-10-01

    High Power Impulse Magnetron Sputtering (HiPIMS) is one of the recent developments in the field of magnetron sputtering technology that is capable of producing high performance, high quality thin films. Commercial implementation of HiPIMS technology has been a huge challenge due to its lower deposition rates compared to direct current Magnetron Sputtering. The cylindrically symmetric "TriPack" magnet pack for a 10 cm sputter magnetron that was developed at the Center for Plasma Material Interactions was able to produce higher deposition rates in HiPIMS compared to conventional pack HiPIMS for the same average power. The "TriPack" magnet pack in HiPIMS produces superior substrate uniformity without the need of substrate rotation in addition to producing higher metal ion fraction to the substrate when compared to the conventional pack HiPIMS [Raman et al., Surf. Coat. Technol. 293, 10 (2016)]. The films that are deposited using the "TriPack" magnet pack have much smaller grains compared to conventional pack DC and HiPIMS films. In this paper, the reasons behind the observed increase in HiPIMS deposition rates from the TriPack magnet pack along with a modified particle flux model is discussed.

  14. Field emission behavior of carbon nanotube field emitters after high temperature thermal annealing

    Directory of Open Access Journals (Sweden)

    Yuning Sun

    2014-07-01

    Full Text Available The carbon nanotube (CNT field emitters have been fabricated by attaching a CNT film on a graphite rod using graphite adhesive material. The CNT field emitters showed much improved field emission properties due to increasing crystallinity and decreasing defects in CNTs after the high temperature thermal annealing at 900 °C in vacuum ambient. The CNT field emitters showed the low turn-on electric field of 1.15 V/μm, the low threshold electric field of 1.62 V/μm, and the high emission current of 5.9 mA which corresponds to a current density of 8.5 A/cm2. In addition, the CNT field emitters indicated the enhanced field emission properties due to the multi-stage effect when the length of the graphite rod increases. The CNT field emitter showed good field emission stability after the high temperature thermal annealing. The CNT field emitter revealed a focused electron beam spot without any focusing electrodes and also showed good field emission repeatability.

  15. Use of computer technology in design of mining field parameters

    Energy Technology Data Exchange (ETDEWEB)

    Magda, R.; Franik, T. (Akademia Gorniczo-Hutnicza, Cracow (Poland). Instytut Projektowania i Budowy Kopaln)

    1989-01-01

    Discusses use of computerized simulation for optimization of longwall mining under conditions of the Lublin coal basin. A model of a coal block mined by a system of 1, 2 or 3 longwall faces is analyzed. Seven different mining schemes (with retreating or advancing working faces, gate roads driven simultaneously with working face advance or with advanced drivage, gate roads used by one or two working faces) are comparatively evaluated. Four groups of input data are used: natural conditions (coal seam thickness, dip angles, coal properties), equipment (drive power, productivity, cutting depth, conveyor length etc.), organizational factors and economic factors. Using the simulation procedure optimum (in regard to economic and technological aspects) mining schemes are selected. 3 refs.

  16. Large field-of-view transmission line resonator for high field MRI

    DEFF Research Database (Denmark)

    Zhurbenko, Vitaliy; Johannesson, Kristjan Sundgaard; Boer, Vincent

    2016-01-01

    Transmission line resonators is often a preferable choice for coils in high field magnetic resonance imaging (MRI), because they provide a number of advantages over traditional loop coils. The size of such resonators, however, is limited to shorter than half a wavelength due to high standing wave....... Achieved magnetic field distribution is compared to the conventional transmission line resonator. Imaging experiments are performed using 7 Tesla MRI system. The developed resonator is useful for building coils with large field-of-view....

  17. Large field-of-view transmission line resonator for high field MRI

    DEFF Research Database (Denmark)

    Zhurbenko, Vitaliy; Johannesson, Kristjan Sundgaard; Boer, Vincent;

    2016-01-01

    Transmission line resonators is often a preferable choice for coils in high field magnetic resonance imaging (MRI), because they provide a number of advantages over traditional loop coils. The size of such resonators, however, is limited to shorter than half a wavelength due to high standing wave....... Achieved magnetic field distribution is compared to the conventional transmission line resonator. Imaging experiments are performed using 7 Tesla MRI system. The developed resonator is useful for building coils with large field-of-view....

  18. Radiolysis of Serine in High Radiation Field

    Directory of Open Access Journals (Sweden)

    Ellen Y. Aguilar-Ovando

    2016-08-01

    Full Text Available The formation of amino acids under simulated condition suggests that this type of compounds were readily formed on the primitive Earth. Nevertheless, there is no conclusive explanation to the origin of their specific chirality in biological systems. Differences in their stability in the primitive conditions may give some clues about this unsolved problem. Protection mechanisms have been considered, such as the adsorption of the organic compounds onto mineral surfaces. By using HPLC/ELSD to analyze aqueous suspensions of serine adsorbed on clay (sodium montmorillonite and a meteorite (Allende irradiated in different doses with a cobalt-60 gamma source, the aim of this work was to study the possible protector role of these mineral surfaces when an amino acid, serine, is adsorbed onto them and the system is exposed to a high radiation source. The results showed that adsorption is better at acidic pH and desorption from the mineral at basic pH. The irradiation of the free amino acid destroyed it almost completely at a dose of 91 kGy, but the presence of the mineral abruptly decreases the decomposition, acting as a protective agent. At the same time, the results in aqueous solution show no statistically significant differences in adsorption or radiolysis of D and L serine.

  19. Atom probe field ion microscopy of high resistivity materials

    Energy Technology Data Exchange (ETDEWEB)

    Sibrandij, S.J.; Larson, D.J.; Miller, M.K.

    1998-02-01

    Over the last 30 years the atom probe has proved to be a powerful tool for studying nanometer-sized compositional fluctuations in a wide range of metallic alloys but has had only limited applications to semiconductors and ceramics. One of the primary reasons for this difference is the higher resistivity of semiconducting and ceramic specimens. Because of this high resistivity, the high voltage field evaporation pulse is attenuated before it reaches the apex of the specimen thereby making the pulse ineffective for field evaporation. Experiments have demonstrated that both variants of the voltage-pulsed atom probe (i.e., those instruments in which the field evaporation pulse is applied directly to the specimen and those in which the negative pulse is applied to a counter electrode in front of the specimen) are equally affected. In this overview, the limits of applicability of the voltage-pulsed atom probe to high resistivity materials are examined. In this study, a wide range of materials have been examined to determine whether field ion microscopy and voltage-pulsed field evaporation can be achieved and the results are summarized in the report. Field ion microscopy including dc field evaporation was possible for all materials except bulk ceramic insulators and glasses. Field ion microscopy requires some conductivity both to achieve a high electric field at the apex of the specimen, and also to support the field ion current. In contrast, voltage-pulsed field evaporation requires transmission of the pulse to the apex of the specimen. All metallic alloys including high resistance alloys and metallic glasses were successfully field evaporated with a voltage pulse. Specimens that were produced from bulk material of several conducting ceramics including MoSi, TiB and TiC were also successfully field evaporated with a voltage pulse.

  20. High energy density capacitors using nano-structure multilayer technology

    Energy Technology Data Exchange (ETDEWEB)

    Barbee, T.W. Jr.; Johnson, G.W.; O`Brien, D.W.

    1992-08-01

    Today, many pulse power and industrial applications are limited by capacitor performance. While incremental improvements are anticipated from existing capacitor technologies, significant advances are needed in energy density to enable these applications for both the military and for American economic competitiveness. We propose a program to research and develop a novel technology for making high voltage, high energy density capacitors. Nano-structure multilayer technologies developed at LLNL may well provide a breakthrough in capacitor performance. Our controlled sputtering techniques are capable of laying down extraordinarily smooth sub-micron layers of dielectric and conductor materials. With this technology, high voltage capacitors with an order of magnitude improvement in energy density may be achievable. Well-understood dielectrics and new materials will be investigated for use with this technology. Capacitors developed by nano-structure multilayer technology are inherently solid state, exhibiting extraordinary mechanical and thermal properties. The conceptual design of a Notepad capacitor is discussed to illustrate capacitor and capacitor bank design and performance with this technology. We propose a two phase R&D program to address DNA`s capacitor needs for electro-thermal propulsion and similar pulse power programs. Phase 1 will prove the concept and further our understanding of dielectric materials and design tradeoffs with multilayers. Nano-structure multilayer capacitors will be developed and characterized. As our materials research and modeling prove successful, technology insertion in our capacitor designs will improve the possibility for dramatic performance improvements. In Phase 2, we will make Notepad capacitors, construct a capacitor bank and demonstrate its performance in a meaningful pulse power application. We will work with industrial partners to design full scale manufacturing and move this technology to industry for volume production.

  1. Magnetic probe array with high sensitivity for fluctuating field.

    Science.gov (United States)

    Kanamaru, Yuki; Gota, Hiroshi; Fujimoto, Kayoko; Ikeyama, Taeko; Asai, Tomohiko; Takahashi, Tsutomu; Nogi, Yasuyuki

    2007-03-01

    A magnetic probe array is constructed to measure precisely the spatial structure of a small fluctuating field included in a strong confinement field that varies with time. To exclude the effect of the confinement field, the magnetic probes consisting of figure-eight-wound coils are prepared. The spatial structure of the fluctuating field is obtained from a Fourier analysis of the probe signal. It is found that the probe array is more sensitive to the fluctuating field with a high mode number than that with a low mode number. An experimental demonstration of the present method is attempted using a field-reversed configuration plasma, where the fluctuating field with 0.1% of the confinement field is successfully detected.

  2. Field calibration studies for ionisation chambers in mixed high-energy radiation fields.

    Science.gov (United States)

    Theis, C; Forkel-Wirth, D; Fuerstner, M; Mayer, S; Otto, Th; Roesler, S; Vincke, H

    2007-01-01

    The monitoring of ambient doses at work places around high-energy accelerators is a challenging task due the complexity of the mixed stray radiation fields encountered. At CERN, mainly Centronics IG5 high-pressure ionisation chambers are used to monitor radiation exposure in mixed fields. The monitors are calibrated in the operational quantity ambient dose equivalent H*(10) using standard, source-generated photon- and neutron fields. However, the relationship between ionisation chamber reading and ambient dose equivalent in a mixed high-energy radiation field can only be assessed if the spectral response to every component and the field composition is known. Therefore, comprehensive studies were performed at the CERN-EU high-energy reference field facility where the spectral fluence for each particle type has been assessed with Monte Carlo simulations. Moreover, studies have been performed in an accessible controlled radiation area in the vicinity of a beam loss point of CERN's proton synchrotron. The comparison of measurements and calculations has shown reasonable agreement for most exposure conditions. The results indicate that conventionally calibrated ionisation chambers can give satisfactory response in terms of ambient dose equivalent in stray radiation fields at high-energy accelerators in many cases. These studies are one step towards establishing a method of 'field calibration' of radiation protection instruments in which Monte Carlo simulations will be used to establish a correct correlation between the response of specific detectors to a given high-energy radiation field.

  3. High-frequency electric field amplification in a magnetized plasma

    Energy Technology Data Exchange (ETDEWEB)

    Timofeev, Aleksandr V [Russian Research Centre ' Kurchatov Institute' , Moscow (Russian Federation)

    2006-11-30

    In the investigation of cyclotron ion heating in systems designed for plasma isotope separation, the high-frequency (HF) electric field amplification effect was found to occur in equilibrium plasma. In the present article this effect is treated as a result of the interaction of the plasma placed in a constant external magnetic field with the HF modes of the vacuum chamber. Consistent elaboration of this approach allowed obtaining a clear interpretation of the HF electric field amplification effect and constructing a simple model of HF field excitation in a plasma column embedded in the external magnetic field. (methodological notes)

  4. High Technology, Work, and Inequality in Southern Labor Markets.

    Science.gov (United States)

    Colclough, Glenna; Tolbert, Charles M., II

    1990-01-01

    Explores the relationship among high technology industrialization, skill levels, and economic inequality. Finds that minority labor force participants experience more earnings discrimination in high tech industries than in other industries. Attributes findings to variations in local labor market contexts and to differing stages of product cycles…

  5. Liquid Droplet Dynamics in Gravity Compensating High Magnetic Field

    Science.gov (United States)

    Bojarevics, V.; Easter, S.; Pericleous, K.

    2012-01-01

    Numerical models are used to investigate behavior of liquid droplets suspended in high DC magnetic fields of various configurations providing microgravity-like conditions. Using a DC field it is possible to create conditions with laminar viscosity and heat transfer to measure viscosity, surface tension, electrical and thermal conductivities, and heat capacity of a liquid sample. The oscillations in a high DC magnetic field are quite different for an electrically conducting droplet, like liquid silicon or metal. The droplet behavior in a high magnetic field is the subject of investigation in this paper. At the high values of magnetic field some oscillation modes are damped quickly, while others are modified with a considerable shift of the oscillating droplet frequencies and the damping constants from the non-magnetic case.

  6. HIGH FIELD Q-SLOPE AND THE BAKING EFFECT

    Energy Technology Data Exchange (ETDEWEB)

    Ciovati, Gianluigi [JLAB

    2009-11-01

    The performance of SRF cavities made of bulk Nb at high fields (peak surface magnetic field greater than about 90 mT) is characterized by exponentially increasing RF losses (high-field Q-slope), in the absence of field emission, which are often mitigated by a low temperature (100-140 °C, 12-48h) baking. In this contribution, recent experimental results and phenomenological models to explain this effect will be briefly reviewed. New experimental results on the high-field Q-slope will be presented for cavities that had been heat treated at high temperature in the presence of a small partial pressure of nitrogen. Improvement of the cavity performances have been obtained, while surface analysis measurements on Nb samples treated with the cavities revealed significantly lower hydrogen concentration than for samples that followed standard cavity treatments.

  7. Field Test of Advanced Duct-Sealing Technologies Within the Weatherization Assistance Program

    Energy Technology Data Exchange (ETDEWEB)

    Ternes, MP

    2001-12-05

    A field test of an aerosol-spray duct-sealing technology and a conventional, best-practice approach was performed in 80 homes to determine the efficacy and programmatic needs of the duct-sealing technologies as applied in the U.S. Department of Energy Weatherization Assistance Program. The field test was performed in five states: Iowa, Virginia, Washington, West Virginia, and Wyoming. The study found that, compared with the best-practice approach, the aerosol-spray technology is 50% more effective at sealing duct leaks and can potentially reduce labor time and costs for duct sealing by 70%, or almost 4 crew-hours. Further study to encourage and promote use of the aerosol-spray technology within the Weatherization Assistance Program is recommended. A pilot test of full production weatherization programs using the aerosol-spray technology is recommended to develop approaches for integrating this technology with other energy conservation measures and minimizing impacts on weatherization agency logistics. In order to allow or improve adoption of the aerosol spray technology within the Weatherization Assistance Program, issues must be addressed concerning equipment costs, use of the technology under franchise arrangements with Aeroseal, Inc. (the holders of an exclusive license to use this technology), software used to control the equipment, safety, and training. Application testing of the aerosol-spray technology in mobile homes is also recommended.

  8. The Influence of Technology-Rich Early Childhood Field Experiences on Preservice Teachers

    Science.gov (United States)

    Lux, Nicholas; Lux, Christine

    2015-01-01

    Despite a comprehensive body of research on field experiences in teacher education, technology-rich early field experiences in early childhood environments is one particular area of inquiry lacking substantive current research. Therefore, this study was conducted to better understand how preservice teachers' perceptions of global concepts related…

  9. Theory Development and Convergence of Human Resource Fields: Implications for Human Performance Technology

    Science.gov (United States)

    Cho, Yonjoo; Yoon, Seung Won

    2010-01-01

    This study examines major theory developments in human resource (HR) fields and discusses implications for human performance technology (HPT). Differentiated HR fields are converging to improve organizational performance through knowledge-based innovations. Ruona and Gibson (2004) made a similar observation and analyzed the historical evolution…

  10. Theory Development and Convergence of Human Resource Fields: Implications for Human Performance Technology

    Science.gov (United States)

    Cho, Yonjoo; Yoon, Seung Won

    2010-01-01

    This study examines major theory developments in human resource (HR) fields and discusses implications for human performance technology (HPT). Differentiated HR fields are converging to improve organizational performance through knowledge-based innovations. Ruona and Gibson (2004) made a similar observation and analyzed the historical evolution…

  11. Clear well physical water treatment technology for the oil field

    Energy Technology Data Exchange (ETDEWEB)

    Troncoso y Troncoso, Joao Ricardo [Weatherford Brazil, Rio de Janeiro, RJ (Brazil); Rzeznik, Lawrence; Parker, Wiley L. [Weatherford International, Houston, TX (United States)

    2008-07-01

    Deposits of various types are common problems associated with oil and gas production. Deposits of scale, paraffin can block tubing, cause pumps to stick and clog valves and chokes. The expense and widespread occurrence of deposition problems have resulted in the development of a variety of treatment options which have been marginally successful at best. This paper discusses a new and novel approach for controlling scale, paraffin using an electronic physical water treating device and results that have been achieved. This physical water treatment technology has been applied to oil and gas production wells which incorporate all forms of product lift. Units are now also being installed in several South American locations. This paper will discuss the results obtained from the use of these physical water treatment devices and discuss the criteria which are used to ascertain whether a particular well site's problems can be eased by use of these devices. These criteria will be discussed for both land based and offshore oil wells. (author)

  12. The big squeeze : multi-phase pumping technology aims to increase recovery rates from aging fields

    Energy Technology Data Exchange (ETDEWEB)

    Ross, E.

    2008-04-15

    New technologies developed to assist with offshore oil and gas activities were discussed. The BP King multi-phase pumping project in the Gulf of Mexico is now expecting to enhance production by 20 per cent and extend the life of its field by 5 years through the use of multibooster pumps installed in 2007. The subsea boosting technology has reduced back pressure on the wells and increased oil recovery rates. Multi-phase pumping increased the distance over which the wellstream could be transported. The pump consisted of 4 main components: (1) a motor barrel; (2) a motor cartridge; (3) a pump barrel; and (4) a twin screw pump cartridge. The twin screw product has the ability to pump oil and gas streams with a range of gas void fractions. The pump is self-priming and runs at a relatively low rate. Changes to the pitch and diameter of the screw are used to control the volume of flow and the pressure. The project is also using a long-distance, high voltage distribution system to control multiple pumps at different speeds. The power umbilical system was developed to provide delivery lines for hydraulic fluids, and the umbilical cords also house a fibre-optic communications system to ensure high speed pump response. 3 figs.

  13. Toward high-performance digital logic technology with carbon nanotubes.

    Science.gov (United States)

    Tulevski, George S; Franklin, Aaron D; Frank, David; Lobez, Jose M; Cao, Qing; Park, Hongsik; Afzali, Ali; Han, Shu-Jen; Hannon, James B; Haensch, Wilfried

    2014-09-23

    The slow-down in traditional silicon complementary metal-oxide-semiconductor (CMOS) scaling (Moore's law) has created an opportunity for a disruptive innovation to bring the semiconductor industry into a postsilicon era. Due to their ultrathin body and ballistic transport, carbon nanotubes (CNTs) have the intrinsic transport and scaling properties to usher in this new era. The remaining challenges are largely materials-related and include obtaining purity levels suitable for logic technology, placement of CNTs at very tight (∼5 nm) pitch to allow for density scaling and source/drain contact scaling. This review examines the potential performance advantages of a CNT-based computing technology, outlines the remaining challenges, and describes the recent progress on these fronts. Although overcoming these issues will be challenging and will require a large, sustained effort from both industry and academia, the recent progress in the field is a cause for optimism that these materials can have an impact on future technologies.

  14. Gyrotrons for High-Power Terahertz Science and Technology at FIR UF

    CERN Document Server

    Idehara, Toshitaka

    2016-01-01

    In this paper, we present the recent progress in the development of a series of gyrotrons at FIR UF that have opened the road to many novel applications in the high-power Terahertz science and technology. The current status of the research in this actively developing field is illustrated by the most representative examples in which the developed gyrotrons are used as powerful and frequency tunable sources of coherent radiation operating in a CW regime. Among them are high-precision spectroscopic techniques (most notably DNP-NMR, ESR, XDMR, and studies of the hyperfine splitting of the energy levels of positronium), treatment and characterization of advanced materials, new medical technologies.

  15. Collaborative Technology Assessments Of Transient Field Processing And Additive Manufacturing Technologies As Applied To Gas Turbine Components

    Energy Technology Data Exchange (ETDEWEB)

    Ludtka, Gerard Michael [ORNL; Dehoff, Ryan R [ORNL; Szabo, Attila [General Electric (GE) Power and Water; Ucok, Ibrahim [General Electric (GE) Power and Water

    2016-01-01

    ORNL partnered with GE Power & Water to investigate the effect of thermomagnetic processing on the microstructure and mechanical properties of GE Power & Water newly developed wrought Ni-Fe-Cr alloys. Exploration of the effects of high magnetic field process during heat treatment of the alloys indicated conditions where applications of magnetic fields yields significant property improvements. The alloy aged using high magnetic field processing exhibited 3 HRC higher hardness compared to the conventionally-aged alloy. The alloy annealed at 1785 F using high magnetic field processing demonstrated an average creep life 2.5 times longer than that of the conventionally heat-treated alloy. Preliminary results show that high magnetic field processing can improve the mechanical properties of Ni-Fe-Cr alloys and potentially extend the life cycle of the gas turbine components such as nozzles leading to significant energy savings.

  16. Recognition and development of "educational technology" as a scientific field and school subject

    Directory of Open Access Journals (Sweden)

    Danilović Mirčeta S.

    2004-01-01

    Full Text Available The paper explores the process of development, establishment and recognition of "educational technology" as an independent scientific field and a separate teaching subject at universities. The paper points to: (a the problems that this field deals with or should deal with, (b knowledge needed for the profession of "educational technologist", (c various scientific institutions across the world involved in educational technology, (d scientific journals treating issues of modern educational technology, (e the authors i.e. psychologists and educators who developed and formulated the basic principles of this scientific field, (f educational features and potentials of educational technologies. Emphasis is placed on the role and importance of AV technology in developing, establishing and recognition of educational technology, and it is also pointed out that AV technology i.e. AV teaching aids and a movement for visualization of teaching were its forerunners and crucial factors for its establishing and developing into an independent area of teaching i.e. school subject. In summary it is stressed that educational technology provides for the execution of instruction through emission transmission, selection, coding, decoding, reception, memorization transformation of all types of pieces of information in teaching.

  17. New business opportunity: Green field project with new technology

    Directory of Open Access Journals (Sweden)

    Lee Seung Jae

    2014-06-01

    technology.

  18. New business opportunity: Green field project with new technology

    Science.gov (United States)

    Lee, Seung Jae; Woo, Jong Hun; Shin, Jong Gye

    2014-06-01

    Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation technology.

  19. Unidirectional coating technology for organic field-effect transistors: materials and methods

    Science.gov (United States)

    Sun, Huabin; Wang, Qijing; Qian, Jun; Yin, Yao; Shi, Yi; Li, Yun

    2015-05-01

    Solution-processed organic field-effect transistors (OFETs) are essential for developing organic electronics. The encouraging development in solution-processed OFETs has attracted research interest because of their potential in low-cost devices with performance comparable to polycrystalline-silicon-based transistors. In recent years, unidirectional coating technology, featuring thin-film coating along only one direction and involving specific materials as well as solution-assisted fabrication methods, has attracted intensive interest. Transistors with organic semiconductor layers, which are deposited via unidirectional coating methods, have achieved high performance. In particular, carrier mobility has been greatly enhanced to values much higher than 10 cm2 V-1 s-1. Such significant improvement is mainly attributed to better control in morphology and molecular packing arrangement of organic thin film. In this review, typical materials that are being used in OFETs are discussed, and demonstrations of unidirectional coating methods are surveyed.

  20. The Cultural Territory of a Technological Excellence – A Field Research in South Tyrol

    Directory of Open Access Journals (Sweden)

    Michela Toni

    2014-10-01

    Full Text Available South Tyrol is a leader in the energy field. A unique case in Italy, South Tyrol is to be investigated beyond any merely technical issues. Developed over many years of regular study trips the Author undertook to the Autonomous Province of Bolzano, this research has unveiled why the many high environment and technological performance buildings existing there make up a unique mosaic. By examining it as a whole, an intricate structure has been found for this formation, thus explaining why this territory boasts such an outstanding culture in comparison with other areas in Italy – which is the key to make sense of its peculiar excellence. Such a new approach triggers thinking about alternative options to be implemented also elsewhere.

  1. Microstructure evolution and surface cleaning of Cu nanoparticles during micro-forming fields activated sintering technology

    Directory of Open Access Journals (Sweden)

    Wu Mingxia

    2015-01-01

    Full Text Available For the purpose of extensive utilization of powder metallurgy to micro/nano- fabrication of materials, the micro gear was prepared by a novel method, named as micro- forming fields activated sintering technology (Micro-FAST. Surface-cleaning of particles, especially during the initial stage of sintering, is a crucial issue for the densification mechanism. However, up to date, the mechanism of surface-cleaning is too complicated to be known. In this paper, the process of surface-cleaning of Micro-FAST was studied, employing the high resolution transmission electron microscopy (HRTEM for observation of microstructure of micro-particles. According to the evolution of the microstructure, surface-cleaning is mainly ascribed to the effect of electro-thermal focusing. The process of surface-cleaning is achieved through rearrangement of grains, formation of vacancy, migration of vacancy and enhancement of electro-thermal focusing.

  2. Robotics and tele-operation technology for applications in nuclear fields

    Energy Technology Data Exchange (ETDEWEB)

    Kosuge, Kazuhiro; Hirata, Yasuhisa; Takeo, Koji [Tohoku Univ., Department of Machine Intelligence and Systems Engineering, Sendai, Miyagi (Japan)

    2002-01-01

    In this article, we introduce available robotics and tele-operation technology for applications in Nuclear Fields. First, robotics technology for manipulation of a large object is introduced which has been experimentally applied to ITER Maintenance Robot. Then, transportation technology of a large object by multiple mobile robots is reviewed. At last, recent tele-operation technologies and a prototype tele-operation system, referred to as VISIT (Visual Interface System for Interactive Task-execution), is introduced. Several experimental results are also introduced. (author)

  3. High magnetic field {mu}SR instrument scientific case

    Energy Technology Data Exchange (ETDEWEB)

    Amato, A

    2005-10-15

    In order to gain more insight into the specific behavior of materials, it is often necessary to perform measurements as a function of different external parameters. Despite its high sensitivity to internal fields, this simple observation also applies for the {mu}SR technique. The most common parameter which can be tuned during an experiment is the sample temperature. By using a range of cryostats, temperatures between 0.02 and 900 K can be covered at the PSI {mu}SR Facility. On the other hand, and by using high-energy muons, pressures as high as 10'000 bars can nowadays be reached during {mu}SR experiments. As will be demonstrated in the following Sections, the magnetic field is an additional external parameter playing a fundamental role when studying the ground state properties of materials in condensed matter physics and chemistry. However, the availability of high magnetic fields for {mu}SR experiments is still rather limited. Hence, if on one hand the high value of the gyromagnetic ratio of the muon provides the high magnetic sensitivity of the method, on the other hand it can lead to very high muon-spin precession frequencies when performing measurements in applied fields (the muon-spin precession frequency in a field of 1 Tesla s 135.5 MHz). Consequently, the use of ultra-fast detectors and electronics is mandatory when measuring in magnetic fields exceeding 1 Tesla. If such fields are very intense when compared to the Earth magnetic field < 10{sup -4} Tesla), the energy associated with them is still modest in view of the thermal energy. Hence, the Zeeman energy splitting of a free electron in a magnetic field of 1 Tesla corresponds to a thermal energy as low as 0.67 Kelvin. It is worth mentioning that nowadays magnetic fields of the order of 10 to 15 Tesla are quite common in condensed matter laboratories and have opened up vast new exciting experimental possibilities. (author)

  4. Spontaneous Radiation Emission from Short, High Field Strength Insertion Devices

    Energy Technology Data Exchange (ETDEWEB)

    Geoffrey Krafft

    2005-09-15

    Since the earliest papers on undulaters were published, it has been known how to calculate the spontaneous emission spectrum from ''short'' undulaters when the magnetic field strength parameter is small compared to unity, or in ''single'' frequency sinusoidal undulaters where the magnetic field strength parameter is comparable to or larger than unity, but where the magnetic field amplitude is constant throughout the undulater. Fewer general results have been obtained in the case where the insertion device is both short, i.e., the magnetic field strength parameter changes appreciably throughout the insertion device, and the magnetic field strength is high enough that ponderomotive effects, radiation retardation, and harmonic generation are important physical phenomena. In this paper a general method is presented for calculating the radiation spectrum for short, high-field insertion devices. It is used to calculate the emission from some insertion device designs of recent interest.

  5. Spontaneous radiation emission from short, high field strength magnetic devices

    Directory of Open Access Journals (Sweden)

    G. A. Krafft

    2006-01-01

    Full Text Available Since the earliest papers on undulators were published, it has been known how to calculate the spontaneous emission spectrum from short undulators when the magnetic field strength parameter is small compared to unity, or in “single” frequency sinusoidal undulators where the magnetic field strength parameter is comparable to or larger than unity, but where the magnetic field amplitude is constant throughout the undulator. Fewer general results have been obtained in the case where the magnetic device is both short, i.e., the magnetic field strength parameter changes appreciably throughout the device, and the magnetic field strength is high enough that ponderomotive effects, radiation retardation, and harmonic generation are important physical phenomena. In this paper a general method is presented for calculating the radiation spectrum for short, high-field magnetic devices. It is used to calculate the emission from some designs of recent interest.

  6. Improving Magnet Designs With High and Low Field Regions

    DEFF Research Database (Denmark)

    Bjørk, Rasmus; Bahl, Christian Robert Haffenden; Smith, Anders

    2011-01-01

    to low field regions. Also, a general way to replace magnet material with a high permeability soft magnetic material where appropriate is discussed. As an example, these schemes are applied to a two dimensional concentric Halbach cylinder design resulting in a reduction of the amount of magnet material......A general scheme for increasing the difference in magnetic flux density between a high and a low magnetic field region by removing unnecessary magnet material is presented. This is important in, e.g., magnetic refrigeration where magnet arrays have to deliver high field regions in close proximity...

  7. Feasibility and usability of a home monitoring concept based on mobile phones and near field communication (NFC) technology.

    Science.gov (United States)

    Morak, Jürgen; Kollmann, Alexander; Schreier, Günter

    2007-01-01

    Utilization of mobile information and communication technologies in home monitoring applications is becoming more and more common. The mobile phone, acting as a patient terminal for patients suffering from chronic diseases, provides an active link to the caregiver to transmit health status information and receive feedback. In such a concept the usability is still limited by the necessity of entering the values via the mobile phone's small keypad. The near field communication technology (NFC), a touch-based wireless interface that became available recently, may improve the usability level of such applications significantly. The focus of this paper is to describe the development of a prototype application based on this technology embedded in a home monitoring system. The feasibility and usability of this approach are evaluated and compared with concepts used in previous approaches. The high quantifier with respect to overall usability indicates that NFC may be the technology of choice for some tasks in home monitoring applications.

  8. High density data storage principle, technology, and materials

    CERN Document Server

    Zhu, Daoben

    2009-01-01

    The explosive increase in information and the miniaturization of electronic devices demand new recording technologies and materials that combine high density, fast response, long retention time and rewriting capability. As predicted, the current silicon-based computer circuits are reaching their physical limits. Further miniaturization of the electronic components and increase in data storage density are vital for the next generation of IT equipment such as ultra high-speed mobile computing, communication devices and sophisticated sensors. This original book presents a comprehensive introduction to the significant research achievements on high-density data storage from the aspects of recording mechanisms, materials and fabrication technologies, which are promising for overcoming the physical limits of current data storage systems. The book serves as an useful guide for the development of optimized materials, technologies and device structures for future information storage, and will lead readers to the fascin...

  9. Utilizing HPC Network Technologies in High Energy Physics Experiments

    CERN Document Server

    AUTHOR|(CDS)2088631; The ATLAS collaboration

    2017-01-01

    Because of their performance characteristics high-performance fabrics like Infiniband or OmniPath are interesting technologies for many local area network applications, including data acquisition systems for high-energy physics experiments like the ATLAS experiment at CERN. This paper analyzes existing APIs for high-performance fabrics and evaluates their suitability for data acquisition systems in terms of performance and domain applicability. The study finds that existing software APIs for high-performance interconnects are focused on applications in high-performance computing with specific workloads and are not compatible with the requirements of data acquisition systems. To evaluate the use of high-performance interconnects in data acquisition systems a custom library, NetIO, is presented and compared against existing technologies. NetIO has a message queue-like interface which matches the ATLAS use case better than traditional HPC APIs like MPI. The architecture of NetIO is based on a interchangeable bac...

  10. Highly Effective Action from Large N Gauge Fields

    CERN Document Server

    Yang, Hyun Seok

    2014-01-01

    Recently John H. Schwarz put forward a conjecture that the world-volume action of a probe $D3$-brane in an AdS5 x S5 background of type IIB superstring theory can be reinterpreted as the highly effective action (HEA) of four-dimensional N=4 superconformal field theory on the Coulomb branch. We argue that the HEA can be derived from the noncommutative (NC) field theory representation of the AdS/CFT correspondence and the Seiberg-Witten (SW) map defining a spacetime field redefinition between ordinary and NC gauge fields. It is based only on the well-known facts that the master fields of large N matrices are higher-dimensional NC U(1) gauge fields and the SW map is a local coordinate transformation eliminating U(1) gauge fields known as the Darboux theorem in symplectic geometry.

  11. Drilling Fluid System & Technology in Sichuan Gas Field

    Institute of Scientific and Technical Information of China (English)

    Wang You; He Lun

    1995-01-01

    @@ Polymer Drilling FluidSystem SPA (Sichuan Petroleum Administration) began to use non-dispersed polymer drilling fluids in 1975. In the beginning,SPA adopted the single polymer drilling fluid systems utilizing single polyacrylamide as full flocculants or utilizing PHPA (partially hydrolyzed polyacrylamide) as proper flocculants, then SPA widely popularized the multi-polymer drilling fluid systems compounding of high, medium and low molecular weight polymers. The amphoteric polymers drilling fluid has been successfully developed and applied in recent years.

  12. Field high-throughput phenotyping: the new crop breeding frontier.

    Science.gov (United States)

    Araus, José Luis; Cairns, Jill E

    2014-01-01

    Constraints in field phenotyping capability limit our ability to dissect the genetics of quantitative traits, particularly those related to yield and stress tolerance (e.g., yield potential as well as increased drought, heat tolerance, and nutrient efficiency, etc.). The development of effective field-based high-throughput phenotyping platforms (HTPPs) remains a bottleneck for future breeding advances. However, progress in sensors, aeronautics, and high-performance computing are paving the way. Here, we review recent advances in field HTPPs, which should combine at an affordable cost, high capacity for data recording, scoring and processing, and non-invasive remote sensing methods, together with automated environmental data collection. Laboratory analyses of key plant parts may complement direct phenotyping under field conditions. Improvements in user-friendly data management together with a more powerful interpretation of results should increase the use of field HTPPs, therefore increasing the efficiency of crop genetic improvement to meet the needs of future generations.

  13. Patterning technology for solution-processed organic crystal field-effect transistors

    Science.gov (United States)

    Li, Yun; Sun, Huabin; Shi, Yi; Tsukagoshi, Kazuhito

    2014-04-01

    Organic field-effect transistors (OFETs) are fundamental building blocks for various state-of-the-art electronic devices. Solution-processed organic crystals are appreciable materials for these applications because they facilitate large-scale, low-cost fabrication of devices with high performance. Patterning organic crystal transistors into well-defined geometric features is necessary to develop these crystals into practical semiconductors. This review provides an update on recent development in patterning technology for solution-processed organic crystals and their applications in field-effect transistors. Typical demonstrations are discussed and examined. In particular, our latest research progress on the spin-coating technique from mixture solutions is presented as a promising method to efficiently produce large organic semiconducting crystals on various substrates for high-performance OFETs. This solution-based process also has other excellent advantages, such as phase separation for self-assembled interfaces via one-step spin-coating, self-flattening of rough interfaces, and in situ purification that eliminates the impurity influences. Furthermore, recommendations for future perspectives are presented, and key issues for further development are discussed.

  14. Patterning technology for solution-processed organic crystal field-effect transistors

    Directory of Open Access Journals (Sweden)

    Yun Li

    2014-04-01

    Full Text Available Organic field-effect transistors (OFETs are fundamental building blocks for various state-of-the-art electronic devices. Solution-processed organic crystals are appreciable materials for these applications because they facilitate large-scale, low-cost fabrication of devices with high performance. Patterning organic crystal transistors into well-defined geometric features is necessary to develop these crystals into practical semiconductors. This review provides an update on recent development in patterning technology for solution-processed organic crystals and their applications in field-effect transistors. Typical demonstrations are discussed and examined. In particular, our latest research progress on the spin-coating technique from mixture solutions is presented as a promising method to efficiently produce large organic semiconducting crystals on various substrates for high-performance OFETs. This solution-based process also has other excellent advantages, such as phase separation for self-assembled interfaces via one-step spin-coating, self-flattening of rough interfaces, and in situ purification that eliminates the impurity influences. Furthermore, recommendations for future perspectives are presented, and key issues for further development are discussed.

  15. Advanced Decontamination Technologies: High Hydrostatic Pressure on Meat Products

    Science.gov (United States)

    Garriga, Margarita; Aymerich, Teresa

    The increasing demand for “natural” foodstuffs, free from chemical additives, and preservatives has triggered novel approaches in food technology developments. In the last decade, practical use of high-pressure processing (HPP) made this emerging non-thermal technology very attractive from a commercial point of view. Despite the fact that the investment is still high, the resulting value-added products, with an extended and safe shelf-life, will fulfil the wishes of consumers who prefer preservative-free minimally processed foods, retaining sensorial characteristics of freshness. Moreover, unlike thermal treatment, pressure treatment is not time/mass dependant, thus reducing the time of processing.

  16. NUMERICAL SIMULATION OF TEMPERATURE FIELD ON FLASH BUTT WELDING FOR HIGH MANGANESE STEELS

    Institute of Scientific and Technical Information of China (English)

    B.D. Yu; W.D. Song; F.C. Zhang

    2005-01-01

    An axial symmetry finite element model coupled with electricity-thermal effect was developed to study the temperature field distribution in process of the flash butt welding (FBW) of frog highmanganese steel. The influence of temperature dependent material properties and the contact resistance were taken into account in FEMsimulation. Meanwhile, the lost materials due to splutter was resolved by using birth and death element. The result of analyzing data shows that the model in the FBW flashing is reasonable and feasible, and can exactly simulate the temperature field distribution. The modeling provides reference for analysis of welding technologies on the temperature field of high-manganese steel in FBW.

  17. A METHOD FOR PRODUCING A HIGH QUALITY SOLENOIDAL FIELD

    Energy Technology Data Exchange (ETDEWEB)

    Feinberg, B.; Brown, I.G.; Halbach, K.; Kunkel, W.B.

    1981-01-01

    A relatively simple and inexpensive device is described which can be used to provide a highly homogeneous solenoidal magnetic field when the solenoid windings are inadequate. Design considerations and experimental measurements are presented. A field straightness of approximately 10{sup -4} radians has been achieved.

  18. High-field EPR spectroscopy of thermal donors in silicon

    DEFF Research Database (Denmark)

    Dirksen, R.; Rasmussen, F.B.; Gregorkiewicz, T.

    1997-01-01

    Thermal donors generated in p-type boron-doped Czochralski-grown silicon by a 450 degrees C heat treatment have been studied by high-field magnetic resonance spectroscopy. In the experiments conducted at a microwave frequency of 140 GHz and in a magnetic field of approximately 5 T four individual...

  19. Effects of high external electric fields on protein conformation

    Science.gov (United States)

    Pompa, Pier Paolo; Bramanti, Alessandro; Maruccio, Giuseppe; del Mercato, Loretta Laureana; Chiuri, Rocco; Cingolani, Roberto; Rinaldi, Ross

    2005-06-01

    Resistance of biomolecules to high electric fields is a main concern for nanobioelectronics/nanobiosensing applications, and it is also a relevant issue from a fundamental perspective, to understand the dielectric properties and structural dynamics of proteins. In nanoscale devices, biomolecules may experience electric fields as high as 107 V/m in order to elicit charge transport/transfer. Understanding the effects of such fields on their structural integrity is thus crucial to assess the reliability of biomolecular devices. In this study, we show experimental evidence for the retention of native-like fold pattern by proteins embedded in high electric fields. We have tested the metalloprotein azurin, deposited onto SiO2 substrates in air with proper electrode configuration, by applying high static electric fields (up to 106-107 V/m). The effects on the conformational properties of protein molecules have been determined by means of intrinsic fluorescence measurements. Experimental results indicate that no significant field-induced conformational alteration occurs. This behavior is also discussed and supported by theoretical predictions of the intrinsic intra-protein electric fields. As the general features of such inner fields are not peculiar of azurin, the conclusions presented here should have general validity.

  20. Enhanced Energy Density in Permanent Magnets using Controlled High Magnetic Field during Processing

    Energy Technology Data Exchange (ETDEWEB)

    Rios, Orlando [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Carter, Bill [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Constantinides, Steve [Arnold Magnetic Technologies, Rochester, NY (United States)

    2016-05-05

    This ORNL Manufacturing Demonstraction Facility (MDF) technical collaboration focused on the use of high magnetic field processing (>2Tesla) using energy efficient large bore superconducting magnet technology and high frequency electromagnetics to improve magnet performance and reduce the energy budget associated with Alnico thermal processing. Alnico, alloys containing Al, Ni, Co and Fe, represent a class of functional nanostructured alloys, and show the greatest potential for supplementing or replacing commercial Nd-based rare-earth alloy magnets.

  1. Frontier Fields: High-Redshift Predictions and Early Results

    CERN Document Server

    Coe, Dan; Zitrin, Adi

    2014-01-01

    The Frontier Fields program is obtaining deep Hubble and Spitzer Space Telescope images of new "blank" fields and nearby fields gravitationally lensed by massive galaxy clusters. The Hubble images of the lensed fields are revealing nJy sources (AB mag > 31), the faintest galaxies yet observed. In this paper, we present high-redshift (z > 6) number count predictions for the full program and candidates in three of the first Hubble Frontier Fields images. The full program will transform our understanding of galaxy evolution in the first 600 million years (z > 9). Where previous programs yielded perhaps a dozen z > 9 candidates, the Frontier Fields may yield ~70 (~6 per field). We base this estimate on an extrapolation of luminosity functions observed between 4 9. This might suggest a deficit of faint z > 9 galaxies as also reported in the Ultra Deep Field (even while excesses of brighter z > 9 galaxies were reported in shallower fields). At these redshifts, cosmic variance (field-to-field variation) is expected...

  2. Improving magnet designs with high and low field regions

    CERN Document Server

    Bjørk, R; Smith, A; Pryds, N

    2014-01-01

    A general scheme for increasing the difference in magnetic flux density between a high and a low magnetic field region by removing unnecessary magnet material is presented. This is important in, e.g., magnetic refrigeration where magnet arrays has to deliver high field regions in close proximity to low field regions. Also, a general way to replace magnet material with a high permeability soft magnetic material where appropriate is discussed. As an example these schemes are applied to a two dimensional concentric Halbach cylinder design resulting in a reduction of the amount of magnet material used by 42% while increasing the difference in flux density between a high and a low field region by 45%.

  3. A Highly Sensitive CMOS Digital Hall Sensor for Low Magnetic Field Applications

    Directory of Open Access Journals (Sweden)

    Li Li

    2012-02-01

    Full Text Available Integrated CMOS Hall sensors have been widely used to measure magnetic fields. However, they are difficult to work with in a low magnetic field environment due to their low sensitivity and large offset. This paper describes a highly sensitive digital Hall sensor fabricated in 0.18 μm high voltage CMOS technology for low field applications. The sensor consists of a switched cross-shaped Hall plate and a novel signal conditioner. It effectively eliminates offset and low frequency 1/f noise by applying a dynamic quadrature offset cancellation technique. The measured results show the optimal Hall plate achieves a high current related sensitivity of about 310 V/AT. The whole sensor has a remarkable ability to measure a minimum ±2 mT magnetic field and output a digital Hall signal in a wide temperature range from −40 °C to 120 °C.

  4. A Highly Sensitive CMOS Digital Hall Sensor for Low Magnetic Field Applications

    Science.gov (United States)

    Xu, Yue; Pan, Hong-Bin; He, Shu-Zhuan; Li, Li

    2012-01-01

    Integrated CMOS Hall sensors have been widely used to measure magnetic fields. However, they are difficult to work with in a low magnetic field environment due to their low sensitivity and large offset. This paper describes a highly sensitive digital Hall sensor fabricated in 0.18 μm high voltage CMOS technology for low field applications. The sensor consists of a switched cross-shaped Hall plate and a novel signal conditioner. It effectively eliminates offset and low frequency 1/f noise by applying a dynamic quadrature offset cancellation technique. The measured results show the optimal Hall plate achieves a high current related sensitivity of about 310 V/AT. The whole sensor has a remarkable ability to measure a minimum ±2 mT magnetic field and output a digital Hall signal in a wide temperature range from −40 °C to 120 °C. PMID:22438758

  5. Good learning practices in the field of science and technology

    Directory of Open Access Journals (Sweden)

    Beatriz Amante García

    2011-09-01

    Full Text Available The European Higher Education Area (EHEA scenario offers a new framework in which the role of universities can be rethought, regardless of the field of new degrees and postgraduate Studies involved. Therefore, the roles of teachers and students might differ significantly as the student would be obliged to request teacher’s guidance in order to acquire not only knowledge, which could be easily obtained elsewhere (books, internet etc. , but also personal skills and, especially, those related to their future professional career.By the term “Good learning practices” we refer to those activities asociated with professorship itself  ,such as those of facilitating and guiding the student learning process, or rather, those activities which are aimed at the student´s thorough learning of specific  (related to the field of study and generic skills.It is now a common occurrence to describe the students of a given classroom as being little motivated and as having great interest in passing but not in actually learning. This fact is quite concerning, as it suggests that the student sees the university as a mere transaction by which they can obtain a degree, certifying that they are apt for the professional world,  where they consider the “real” learning will take place.A good classroom environment is essential for the generation of teaching-learning processes.  It is precisely because of this that we are able to raise the issue of effective practices among teachers who foster a suitable classroom dynamics facilitating, then, the targeted learning experience.  Within this context, there are some authors who discuss good practices by professors especially concerned on how to perform assessment and feedback to enhance student’s learning activity. Thus,  providing them with a deep and lasting impact. Generally speaking, the activities in question are those which enable the student to execute a learning process that will continue throughout

  6. Technology and Economic Assessment of Innovative Field Drainage Technologies in Denmark

    DEFF Research Database (Denmark)

    Gachango, Florence Gathoni

    Intensive agricultural production in most parts of the world especially in the more developed countries continues to mount pressure on water resources thereby threatening the quality of life in the aquatic ecosystems. With stringent standards such as those stipulated in the European Union Water...... proposed as appropriate solutions to this problem in the Danish context. The feasibility of these technologies with regards to their cost-effectiveness in nutrient mitigation, farmers’ adoption behavior, and environmental policy implementation is assessed in this thesis. The thesis comprises of four papers...... based on survey and case-farms data and utilizes a mix of quantitative and qualitative methods to investigate: i) the farmers’ perception of water quality and their adoption behavior with respect to voluntary nutrient reduction technologies, ii) the farmers willingness to adopt constructed wetland...

  7. In-Situ MVA of CO2 Sequestration Using Smart Field Technology

    Energy Technology Data Exchange (ETDEWEB)

    Mohaghegh, Shahab D. [West Virginia Univ. Research Corporation, Morgantown, WV (United States)

    2014-09-01

    Capability of underground carbon dioxide storage to confine and sustain injected CO2 for a long period of time is the main concern for geologic CO2 sequestration. If a leakage from a geological CO2 sequestration site occurs, it is crucial to find the approximate amount and the location of the leak, in a timely manner, in order to implement proper remediation activities. An overwhelming majority of research and development for storage site monitoring has been concentrated on atmospheric, surface or near surface monitoring of the sequestered CO2 . This study aims to monitor the integrity of CO2 storage at the reservoir level. This work proposes developing in-situ CO2 Monitoring and Verification technology based on the implementation of Permanent Down-hole Gauges (PDG) or “Smart Wells” along with Artificial Intelligence and Data Mining (AI&DM). The technology attempts to identify the characteristics of the CO2 leakage by de-convolving the pressure signals collected from Permanent Down-hole Gauges (PDG). Citronelle field, a saline aquifer reservoir, located in the U.S. was considered as the basis for this study. A reservoir simulation model for CO2 sequestration in the Citronelle field was developed and history matched. PDGs were installed, and therefore were considered in the numerical model, at the injection well and an observation well. Upon completion of the history matching process, high frequency pressure data from PDGs were generated using the history matched numerical model using different CO2 leakage scenarios. Since pressure signal behaviors were too complicated to de-convolute using any existing mathematical formulations, a Machine Learning-based technology was introduced for this purpose. An Intelligent Leakage Detection System (ILDS) was developed as the result of this effort using the machine learning and pattern recognition technologies. The ILDS

  8. Overlay control methodology comparison: field-by-field and high-order methods

    Science.gov (United States)

    Huang, Chun-Yen; Chiu, Chui-Fu; Wu, Wen-Bin; Shih, Chiang-Lin; Huang, Chin-Chou Kevin; Huang, Healthy; Choi, DongSub; Pierson, Bill; Robinson, John C.

    2012-03-01

    Overlay control in advanced integrated circuit (IC) manufacturing is becoming one of the leading lithographic challenges in the 3x and 2x nm process nodes. Production overlay control can no longer meet the stringent emerging requirements based on linear composite wafer and field models with sampling of 10 to 20 fields and 4 to 5 sites per field, which was the industry standard for many years. Methods that have emerged include overlay metrology in many or all fields, including the high order field model method called high order control (HOC), and field by field control (FxFc) methods also called correction per exposure. The HOC and FxFc methods were initially introduced as relatively infrequent scanner qualification activities meant to supplement linear production schemes. More recently, however, it is clear that production control is also requiring intense sampling, similar high order and FxFc methods. The added control benefits of high order and FxFc overlay methods need to be balanced with the increased metrology requirements, however, without putting material at risk. Of critical importance is the proper control of edge fields, which requires intensive sampling in order to minimize signatures. In this study we compare various methods of overlay control including the performance levels that can be achieved.

  9. The development of recent high-power ultrasonic transducers for Near-well ultrasonic processing technology.

    Science.gov (United States)

    Wang, Zhenjun; Xu, Yuanming

    2017-07-01

    With the reduction of crude oil throughout the world, enhance oil recovery technology has become a major oil research topics, which can greatly increase the recovery ratio of the crude oil before the dawning of renewable energy era. Near-well ultrasonic processing technology, as one new method, has attracted more attention for Enhanced Oil Recovery due to its low cost, good applicability and no environmental pollution in recent rears. There are two important relevant aspects about Near-well ultrasonic processing technology: (a) how to enhance the oil flow through the rocks into the pumping pool and (b) how to reduce the oil viscosity so that it can be easier to pump. Therefore, how to design a high-power ultrasonic equipment with excellent performance is crucial for Near-well ultrasonic processing technology. In this paper, recent new high-power ultrasonic transducers for Near-well ultrasonic processing technology are summarized. Each field application of them are also given. The purpose of this paper is to provide reference for the further development of Near-well ultrasonic processing technology. With the reduction of crude oil throughout the world, enhance oil recovery technology has become a major oil research topics, which can greatly increase the recovery ratio of the crude oil before the dawning of renewable energy era. Near-well ultrasonic processing technology, as one new method, has attracted more attention for Enhanced Oil Recovery due to its low cost, good applicability and no environmental pollution in recent rears. There are two important relevant aspects about Near-well ultrasonic processing technology: (a) how to enhance the oil flow through the rocks into the pumping pool and (b) how to reduce the oil viscosity so that it can be easier to pump. Therefore, how to design a high-power ultrasonic equipment with excellent performance is crucial for Near-well ultrasonic processing technology. In this paper, recent new high-power ultrasonic transducers

  10. Field experience and improvements with thin tubular-plate lead/acid technology

    Energy Technology Data Exchange (ETDEWEB)

    Merz, K.D. [CMP Batteries, Bolton (United Kingdom)

    1998-05-18

    The Classic 25 is the product name for a motive-power lead/acid cell using thin positive tubular plates. This cell was developed for use in electric vehicles and other applications where high specific energy and reliable cycle life is required. It would appear that the best approach is to provide a lead/acid battery that has the highest specific energy while still maintaining excellent cycle life. This technology was implemented by use of 6 V modules, followed by a 2-V design. Since this was first introduced in 1989, more than 20 000 cells and monoblocs have been delivered to various electric vehicle applications such as vans, trucks, and buses. The field experience with this product is therefore excellent, and development is continuing on the battery design and manufacturing techniques to improve performance and life even further. Today, a wide range of products using this technology is available, and the latest developments are a new 6 V monobloc and some maintenance-free cells. (orig.)

  11. Strong magnetic fields in normal galaxies at high redshifts

    CERN Document Server

    Bernet, Martin L; Lilly, Simon J; Kronberg, Philipp P; Dessauges-Zavadsky, Miroslava

    2008-01-01

    The origin and growth of magnetic fields in galaxies is still something of an enigma. It is generally assumed that seed fields are amplified over time through the dynamo effect, but there are few constraints on the timescale. It has recently been demonstrated that field strengths as traced by rotation measures of distant quasars are comparable to those seen today, but it was unclear whether the high fields were in the exotic environments of the quasars themselves or distributed along the line of sight. Here we demonstrate that the quasars with strong MgII absorption lines are unambiguously associated with larger rotation measures. Since MgII absorption occurs in the haloes of normal galaxies along the sightline to the quasars, this association requires that organized fields of surprisingly high strength are associated with normal galaxies when the Universe was only about one-third of its present age.

  12. Application of high magnetic fields in advanced materials processing

    Institute of Scientific and Technical Information of China (English)

    MA Yanwei; XIAO Liye; YAN Luguang

    2006-01-01

    Recently, steady magnetic fields available from cryogen-free superconducting magnets open up new ways to process materials. In this paper,the main results obtained by using a high magnetic field to process several advanced materials are reviewed. These processed objects primarily include superconducting, magnetic, metallic and nanometer-scaled materials. It has been found that a high magnetic field can effectively align grains when fabricating the magnetic and non-magnetic materials and make inclusions migrate in a molten metal. The mechanism is discussed from the theoretical viewpoint of magnetization energy.

  13. High-field spin dynamics of antiferromagnetic quantum spin chains

    DEFF Research Database (Denmark)

    Enderle, M.; Regnault, L.P.; Broholm, C.;

    2000-01-01

    The characteristic internal order of macroscopic quantum ground states in one-dimensional spin systems is usually not directly accessible, but reflected in the spin dynamics and the field dependence of the magnetic excitations. In high magnetic fields quantum phase transitions are expected. We...... present recent work on the high-field spin dynamics of the S = I antiferromagnetic Heisenberg chains NENP (Haldane ground state) and CsNiCl3 (quasi-1D HAF close to the quantum critical point), the uniform S = 1/2 chain CTS, and the spin-Peierls system CuGeO3. (C) 2000 Elsevier Science B,V. All rights...

  14. Micromagnetic simulation for high field sensors with perpendicular magnetizations

    Institute of Scientific and Technical Information of China (English)

    Jin Wei; Liu Yao-Wen

    2007-01-01

    In this paper, we present a micromagnetic design for high field sensors. The hard layer of the sensors is L10-FePt which is magnetized perpendicularly to film plane and the sense layer is NiFe which is magnetized in the film plane. The magnetization configurations of the hard and sense layers at different external magnetic fields have been simulated. In micromagnetic simulation, the sense field up to one tesla can be reached by using this sensor. We find that whether the sensor has a symmetric or an asymmetric field-sensing window is determined by the coercive field of the hard layer and the demagnetizing field of the sense layer.

  15. L/earning a Living: Practices and Recognition of Women's On-the-Job and Informal Learning in the Information Technology Field

    Science.gov (United States)

    Jubas, Kaela; Butterwick, Shauna; Zhu, Hong; Liptrot, Jen

    2006-01-01

    Information technology (IT) has been characterized as central to globalization and nation-states' competitive edge in the global economy. A highly masculinized field, IT is paradoxically characterized as gender-neutral, a field which expands opportunities for women's career and income development. For these reasons, feminist researchers regard it…

  16. The Role of Field Electron Emission in Polypropylene/Aluminum Nanodielectrics Under High Electric Fields.

    Science.gov (United States)

    Zhang, Guoqiang; Li, Yue; Tang, Saide; Thompson, Rhett D; Zhu, Lei

    2017-03-09

    Polymer/metallic particle nanocomposites or nanodielectrics can exhibit colossal dielectric constants with a relatively low dissipation factor under low electric fields and thus seem to be promising for high-energy density dielectric capacitors. To study this possibility, this work focused on the dielectric performance and loss mechanisms in polypropylene (PP)/aluminum nanoparticle (nAl NP) composites under high electric fields. Phosphonic acid-terminated poly(ethylene-co-1-butene) was grafted to the Al2O3 surface layer on the nAl NPs in order to achieve reasonable dispersion in the PP matrix. The dielectric breakdown study showed that the breakdown strength decreased to nearly 1/20 that of the neat PP film as the nAl content increased to 25.0 vol %. The leakage current study revealed three electronic conduction mechanisms in the PP/100 nm nAl nanocomposites, namely, ohmic conduction at low fields, hopping conduction at intermediate fields, and Fowler-Nordheim (FN) field electron emission above a critical field, depending on the filler content. Compared to the 100 nm nAl NPs, smaller (e.g., 18 nm) nAl NPs needed a much higher electric field to exhibit FN field electron emission. It was the FN electron tunneling that induced a substantial reduction in breakdown strength for the PP/nAl nanocomposites. Meanwhile, electron-tunneling injected space charges (electrons) from nAl NPs into the PP matrix, and internal electronic conduction led to significant dielectric nonlinearity at high poling fields. Although polymer/metallic NP composites are not suitable for high-field electric applications, they can be good candidates for electrical switches and quantum tunneling composites operated at relatively low electric fields.

  17. INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Scott Hara

    2001-06-27

    The objective of this project is to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California through the testing and application of advanced reservoir characterization and thermal production technologies. The successful application of these technologies will result in expanding their implementation throughout the Wilmington Field and, through technology transfer, to other slope and basin clastic (SBC) reservoirs. The existing steamflood in the Tar zone of Fault Block II-A (Tar II-A) has been relatively inefficient because of several producibility problems which are common in SBC reservoirs: inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil and non-uniform distribution of the remaining oil. This has resulted in poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. A suite of advanced reservoir characterization and thermal production technologies are being applied during the project to improve oil recovery and reduce operating costs.

  18. High rate anaerobic thermophilic technologies for distillery wastewater treatment.

    Science.gov (United States)

    Pérez-García, M; Romero-García, L I; Rodríguez-Cano, R; Sales-Márquez, D

    2005-01-01

    In this paper, performance of two high rate technologies, upflow anaerobic fixed-film reactor and fluidized bed laboratory-scale, treating distillery wastewater (wine vinasses) at anaerobic thermophilic conditions have been compared. The results obtained show that the stationary packed bed, with a corrugated plastic support, operated under stable conditions at organic loading rates (OLR0) around 20 kgCOD/m3/d, gives maximal total CODr of 76% at OLR0 of 6.29 kgCOD/m3/d; the fluidized bed reactor, operated on open pore sintered-glass media, gives total CODr of 96% at OLR0 of 5.88 kgCOD/m3/d. The anaerobic fluidized bed technology is more effective than the upflow anaerobic fixed-film technology due, fundamentally, to this technology favouring the transport of microbial cells from the bulk to the surface and enhancing the contact between the microorganism-substrate phases, In this sense, the stationary packed bed technology is adequate for the treatment of easily biodegradable wastewater, or for the cases where elevated percentages of CODr removal are not required, while the fluidized bed technology is especially suitable for treatment of hazardous wastes with recalcitrant compositions.

  19. CAD/CAM. High-Technology Training Module.

    Science.gov (United States)

    Zuleger, Robert

    This high technology training module is an advanced course on computer-assisted design/computer-assisted manufacturing (CAD/CAM) for grades 11 and 12. This unit, to be used with students in advanced drafting courses, introduces the concept of CAD/CAM. The content outline includes the following seven sections: (1) CAD/CAM software; (2) computer…

  20. Characteristics Contributing to High-Technology Start-Up Success

    DEFF Research Database (Denmark)

    Goslin, L.; Brown, W.; Palm, T.

    1993-01-01

    The factors contributing to the success of high technology start-up firms have received much discussion in current business literature. The discussion of the characteristics of success has been based on increasing substantiation by empirical research. The available information suggests that the p...

  1. High power electron and ion beam research and technology

    Energy Technology Data Exchange (ETDEWEB)

    Nation, J.A.; Sudan, R.N. (eds.)

    1977-01-01

    Topics covered in volume II include: collective accelerators; microwaves and unneutralized E-beams; technology of high-current E-beam accelerators and laser applications of charged-particle beams. Abstracts of twenty-nine papers from the conference were prepared for the data base in addition to six which appeared previously. (GHT)

  2. Technological monitoring of subgrade construction on high-temperature permafrost

    Institute of Scientific and Technical Information of China (English)

    Svyatoslav Ya. Lutskiy; Taisia V. Shepitko; Alexander M. Cherkasov

    2015-01-01

    Three stages of complex technological monitoring for the increase of high-temperature-permafrost soil bearing capacity are described. The feasibility of process monitoring to improve the targeted strength properties of subgrade bases on frozen soils is demonstrated. The rationale for the necessity of predictive modeling of freeze-thaw actions during the subgrade construction period is provided.

  3. High Technology as a Tool of Language Learning

    Institute of Scientific and Technical Information of China (English)

    Xu Xiaoying

    2011-01-01

    Communicative Language Teaching is based on the premise that language learning involves not only the knowledge of the structure and forms, but also the communicative functions and purposes of a language. This study shows that high technology enhances communication skills and strengthens language through computer supported group interaction.

  4. The Challenge of High Technology to Business Education.

    Science.gov (United States)

    Zimmerman, Vernon K.

    1984-01-01

    Indicates that the challenge to schools of business education is to assist national and international economies in the transition to a high technological age and to ensure that courses and programs recognize the fundamental changes in the economic environment and prepare students for management in the 21st century. (JOW)

  5. Identifying and Researching Market Opportunities for New High Technology Products.

    Science.gov (United States)

    Dunstan, Peter

    Using a product called the synchro-pulse welder as a case study example, this paper discusses the activities of CSIRO (Commonwealth Scientific and Industrial Research Organisation) in identifying and marketing new high-technology products. A general discussion of CSIRO's market research plans includes two goals to be attained within the next 5…

  6. Solar flare prediction using highly stressed longitudinal magnetic field parameters

    Institute of Scientific and Technical Information of China (English)

    Xin Huang; Hua-Ning Wang

    2013-01-01

    Three new longitudinal magnetic field parameters are extracted from SOHO/MDI magnetograms to characterize properties of the stressed magnetic field in active regions,and their flare productivities are calculated for 1055 active regions.We find that the proposed parameters can be used to distinguish flaring samples from non-flaring samples.Using the long-term accumulated MDI data,we build the solar flare prediction model by using a data mining method.Furthermore,the decision boundary,which is used to divide flaring from non-flaring samples,is determined by the decision tree algorithm.Finally,the performance of the prediction model is evaluated by 10-fold cross validation technology.We conclude that an efficient solar flare prediction model can be built by the proposed longitudinal magnetic field parameters with the data mining method.

  7. Application Of High Speed Photography In Science And Technology

    Science.gov (United States)

    Wu Ji-Zong, Wu; Yu-Ju, Lin

    1983-03-01

    The service works in high-speed photography carried out by the Department of Precision Instruments, Tianjin University are described in this paper. A compensation type high-speed camera was used in these works. The photographic methods adopted and better results achieved in the studies of several technical fields, such as velocity field of flow of overflow surface of high dam, combustion process of internal combustion engine, metal cutting, electrical are welding, experiment of piling of steel tube piles for supporting the marine platforms and characteristics of motion of wrist watch escape mechanism and so on are illustrated in more detail. As the extension of human visual organs and for increasing the abi-lities of observing and studying the high-speed processes, high-speed photography plays a very important role. In order to promote the application and development on high-speed photography, we have carried out the consultative and service works inside and outside Tianjin Uni-versity. The Pentazet 35 compensation type high-speed camera, made in East Germany, was used to record the high-speed events in various kinds of technical investigations and necessary results have been ob-tained. 1. Measurement of flow velocity on the overflow surface of high dam. In the design of a key water control project with high head, it is extremely necessary to determinate various characteristics of flow velocity field on the overflow surface of high dam. Since the water flow on the surface of high overflow dam possesses the features of large flow velocity and shallow water depth, therefore it is difficult to use the conventional current meters such as pilot tube, miniature cur-rent meter or electrical measuring methods of non-electrical quantities for studying this problem. Adopting the high-speed photographic method to study analogously the characteristics of flow velocity field on the overflow surface of high dam is a kind of new measuring method. People

  8. Field emission studies of novel ZnO nanostructures in high and low field regions

    Energy Technology Data Exchange (ETDEWEB)

    Ramgir, Niranjan S [Physical and Materials Chemistry Division, National Chemical Laboratory, Pune 411 008 (India); Late, Dattatray J [Center for Advanced Studies in Material Science and Solid State Physics, Department of Physics, University of Pune, Pune-411007 (India); Bhise, Ashok B [Center for Advanced Studies in Material Science and Solid State Physics, Department of Physics, University of Pune, Pune-411007 (India); Mulla, Imtiaz S [Physical and Materials Chemistry Division, National Chemical Laboratory, Pune 411 008 (India); More, Mahendra A [Center for Advanced Studies in Material Science and Solid State Physics, Department of Physics, University of Pune, Pune-411007 (India); Joag, Dilip S [Center for Advanced Studies in Material Science and Solid State Physics, Department of Physics, University of Pune, Pune-411007 (India); Pillai, Vijayamohanan K [Physical and Materials Chemistry Division, National Chemical Laboratory, Pune 411 008 (India)

    2006-06-14

    A study of the field emission characteristics of novel structures of ZnO, namely marigolds, multipods and microbelts, has been carried out in both the close proximity configuration and the conventional field emission microscope. The use of a conventional field emission microscope overcomes the drawback of arc formation at high field values. The nonlinearity in the Fowler-Nordheim (F-N) plot, a characteristic feature of semiconductors has been observed and explained on the basis of electron emission from both the conduction and the valence bands. The current stability exhibited by these structures is also promising for future device applications.

  9. Field emission studies of novel ZnO nanostructures in high and low field regions

    Science.gov (United States)

    Ramgir, Niranjan S.; Late, Dattatray J.; Bhise, Ashok B.; Mulla, Imtiaz S.; More, Mahendra A.; Joag, Dilip S.; Pillai, Vijayamohanan K.

    2006-06-01

    A study of the field emission characteristics of novel structures of ZnO, namely marigolds, multipods and microbelts, has been carried out in both the close proximity configuration and the conventional field emission microscope. The use of a conventional field emission microscope overcomes the drawback of arc formation at high field values. The nonlinearity in the Fowler-Nordheim (F-N) plot, a characteristic feature of semiconductors has been observed and explained on the basis of electron emission from both the conduction and the valence bands. The current stability exhibited by these structures is also promising for future device applications.

  10. Rotating sample magnetometer for cryogenic temperatures and high magnetic fields.

    Science.gov (United States)

    Eisterer, M; Hengstberger, F; Voutsinas, C S; Hörhager, N; Sorta, S; Hecher, J; Weber, H W

    2011-06-01

    We report on the design and implementation of a rotating sample magnetometer (RSM) operating in the variable temperature insert (VTI) of a cryostat equipped with a high-field magnet. The limited space and the cryogenic temperatures impose the most critical design parameters: the small bore size of the magnet requires a very compact pick-up coil system and the low temperatures demand a very careful design of the bearings. Despite these difficulties the RSM achieves excellent resolution at high magnetic field sweep rates, exceeding that of a typical vibrating sample magnetometer by about a factor of ten. In addition the gas-flow cryostat and the high-field superconducting magnet provide a temperature and magnetic field range unprecedented for this type of magnetometer.

  11. Ultra-high-speed serial optical communications: Enabling technologies

    DEFF Research Database (Denmark)

    Oxenløwe, Leif Katsuo; Galili, Michael; Mulvad, Hans Christian Hansen

    2008-01-01

    This paper will present recently identified and demonstrated key technologies for ultra-high-speed serial communications. Certain key components such as stabilised highly non-linear fibre switches, periodically poled Lithium Niobate devices and semiconductor optical amplifiers will be described...... with demonstrations of 640 Gb/s transmission, clock recovery, demultiplexing, add/drop, wavelength conversion and channel identification. Timing jitter tolerance is addressed through techniques to create flat-top pulses....

  12. Automated Fabrication Technologies for High Performance Polymer Composites

    Science.gov (United States)

    Shuart , M. J.; Johnston, N. J.; Dexter, H. B.; Marchello, J. M.; Grenoble, R. W.

    1998-01-01

    New fabrication technologies are being exploited for building high graphite-fiber-reinforced composite structure. Stitched fiber preforms and resin film infusion have been successfully demonstrated for large, composite wing structures. Other automatic processes being developed include automated placement of tacky, drapable epoxy towpreg, automated heated head placement of consolidated ribbon/tape, and vacuum-assisted resin transfer molding. These methods have the potential to yield low cost high performance structures by fabricating composite structures to net shape out-of-autoclave.

  13. Advanced processing technology for high-nitrogen steels

    Science.gov (United States)

    Dunning, John S.; Simmons, John W.; Rawers, James C.

    1994-03-01

    Both high-and low-pressure processing techniques can be employed to add nitrogen to iron-based alloys at levels in excess of the equilibrium, ambient-pressure solubility limits. High-pressure techniques include high-pressure melting-solidification; powder atomization; and high-pressure, solid-state diffusion. Low-pressure techniques are centrifugal powder atomization and mechanical alloying. This article describes U.S. Bureau of Mines research on a range of processing technologies for nitrogen steels and references thermodynamic and materials characterization studies that have been completed on these materials.

  14. High harmonic generation in a two-color field composed of a pump field and a weak subsidiary high frequency field

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    “Coherent control of high-harmonic generation in a two-color field” has been widely concerned. Using split-operator algorithm, we have calculated the high-harmonic generation for helium ion He+ in a two-color field which is composed of a driving field and a weak subsidiary high frequency field (Is=I0/100, (ω,13ω), …(ω, 120ω)) and found that such a field can produce much higher harmonic intensity, typically increasing the harmonics corresponding to the incident frequency of the subsidiary field. The different effects coming from the different subsidiary fields are calculated and analyzed. It is indicated that one of the important underlying mechanisms is high frequency photon induced radiation.

  15. High-level waste management technology program plan

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, H.D.

    1995-01-01

    The purpose of this plan is to document the integrated technology program plan for the Savannah River Site (SRS) High-Level Waste (HLW) Management System. The mission of the SRS HLW System is to receive and store SRS high-level wastes in a see and environmentally sound, and to convert these wastes into forms suitable for final disposal. These final disposal forms are borosilicate glass to be sent to the Federal Repository, Saltstone grout to be disposed of on site, and treated waste water to be released to the environment via a permitted outfall. Thus, the technology development activities described herein are those activities required to enable successful accomplishment of this mission. The technology program is based on specific needs of the SRS HLW System and organized following the systems engineering level 3 functions. Technology needs for each level 3 function are listed as reference, enhancements, and alternatives. Finally, FY-95 funding, deliverables, and schedules are s in Chapter IV with details on the specific tasks that are funded in FY-95 provided in Appendix A. The information in this report represents the vision of activities as defined at the beginning of the fiscal year. Depending on emergent issues, funding changes, and other factors, programs and milestones may be adjusted during the fiscal year. The FY-95 SRS HLW technology program strongly emphasizes startup support for the Defense Waste Processing Facility and In-Tank Precipitation. Closure of technical issues associated with these operations has been given highest priority. Consequently, efforts on longer term enhancements and alternatives are receiving minimal funding. However, High-Level Waste Management is committed to participation in the national Radioactive Waste Tank Remediation Technology Focus Area. 4 refs., 5 figs., 9 tabs.

  16. Progress and Challenges in High Performance Computer Technology

    Institute of Scientific and Technical Information of China (English)

    Xue-Jun Yang; Yong Dou; Qing-Feng Hu

    2006-01-01

    High performance computers provide strategic computing power in the construction of national economy and defense, and become one of symbols of the country's overall strength. Over 30 years, with the supports of governments, the technology of high performance computers is in the process of rapid development, during which the computing performance increases nearly 3 million times and the processors number expands over 10 hundred thousands times. To solve the critical issues related with parallel efficiency and scalability, scientific researchers pursued extensive theoretical studies and technical innovations. The paper briefly looks back the course of building high performance computer systems both at home and abroad,and summarizes the significant breakthroughs of international high performance computer technology. We also overview the technology progress of China in the area of parallel computer architecture, parallel operating system and resource management,parallel compiler and performance optimization, environment for parallel programming and network computing. Finally, we examine the challenging issues, "memory wall", system scalability and "power wall", and discuss the issues of high productivity computers, which is the trend in building next generation high performance computers.

  17. Strategic alliances and product development in high technology new firms: The moderating effect of technological capabilities

    NARCIS (Netherlands)

    Haeussler, C.; Patzelt, H.; Zahra, S.A.

    2012-01-01

    High technology new firms have extensively used strategic alliances to gain access to knowledge, resources and capabilities. However, given their inexperience and limited resources, these firms are vulnerable to their more established partners' potential opportunism. This raises the question: How ca

  18. Space Technology 5 (ST-5) Multipoint Observations of Temporal and Spatial Variability of Field-Aligned Currents

    Science.gov (United States)

    Le, Guan

    2010-01-01

    Space Technology 5 (ST-5) is a three micro-satellite constellation deployed into a 300 x 4500 km, dawn-dusk, sun-synchronous polar orbit from March 22 to June 21, 2006, for technology validations. In this paper, we present a study of the temporal variability of field-aligned currents using multi-point magnetic field measurements from ST5. The data demonstrate that mesoscale current structures are commonly embedded within large-scale field-aligned current sheets. The meso-scale current structures are very dynamic with highly variable current density and/or polarity in time scales of about 10 min. They exhibit large temporal variations during both quiet and disturbed times in such time scales. On the other hand, the data also shown that the time scales for the currents to be relatively stable are about 1 min for meso-scale currents and about 10 min for large scale current sheets. These temporal features are obviously associated with dynamic variations of their particle carriers (mainly electrons) as they respond to the variations of the parallel electric field in auroral acceleration region. The characteristic time scales for the temporal variability of meso-scale field-aligned currents are found to be consistent with those of auroral parallel electric field.

  19. Influence of Science, Technology, and Engineering Curriculum on Rural Midwestern High School Student Career Decisions

    Science.gov (United States)

    Killingsworth, John

    Low degree completion in technical and engineering degrees is a growing concern for policymakers and educators in the United States. This study was an examination of the behaviors of adolescents specific to career decisions related to technology and engineering. The central research question for this study was: do rural, Midwestern high school technical and engineering curricula serve to engage students sufficiently to encourage them to persist through high school while sustaining their interests in technology and engineering careers? Engaging students in technology and engineering fields is the challenge for educators throughout the country and the Midwest. Rural schools have the additional challenge of meeting those issues because of resource limitations. Students in three Midwestern schools were surveyed to determine the level of interest in technology and engineering. The generalized likelihood ratio test was used to overcome concerns for small sample sizes. Accounting for dependent variables, multiple independent variables are examined using descriptive statistics to determine which have greater influence on career decisions, specifically those related to technology and engineering. A typical science curriculum is defined for rural Midwestern high schools. This study concludes that such curriculum achieves the goal of maintaining or increasing student interest and engagement in STEM careers. Furthermore, those schools that incorporate contextual and experiential learning activities into the curriculum demonstrate increased results in influencing student career choices toward technology and engineering careers. Implications for parents, educators, and industry professionals are discussed.

  20. Italian high technology shows its wares at CERN

    CERN Multimedia

    Maximilien Brice

    2005-01-01

    Italian industry held an exhibition at CERN on 14-17 November with 26 firms displaying innovative technological developments. In particular it featured categories such as mechanics, high-vacuum technologies, electronics for detectors, and electric and civil engineering. The exhibition was inaugurated in the presence of Guido Possa, vice-minister for education, universities and research. The event was organized by Sandro Centro, INFN researcher and Industrial Liaison Officer at CERN, along with Federico Ferrini, scientific officer for International Organizations of Geneva and the Italian Chamber of Commerce in Switzerland

  1. High resolution, large dynamic range field map estimation

    Science.gov (United States)

    Dagher, Joseph; Reese, Timothy; Bilgin, Ali

    2013-01-01

    Purpose We present a theory and a corresponding method to compute high resolution field maps over a large dynamic range. Theory and Methods We derive a closed-form expression for the error in the field map value when computed from two echoes. We formulate an optimization problem to choose three echo times which result in a pair of maximally distinct error distributions. We use standard field mapping sequences at the prescribed echo times. We then design a corresponding estimation algorithm which takes advantage of the optimized echo times to disambiguate the field offset value. Results We validate our method using high resolution images of a phantom at 7T. The resulting field maps demonstrate robust mapping over both a large dynamic range, and in low SNR regions. We also present high resolution offset maps in vivo using both, GRE and MEGE sequences. Even though the proposed echo time spacings are larger than the well known phase aliasing cutoff, the resulting field maps exhibit a large dynamic range without the use of phase unwrapping or spatial regularization techniques. Conclusion We demonstrate a novel 3-echo field map estimation method which overcomes the traditional noise-dynamic range trade-off. PMID:23401245

  2. MAGNETIC FIELDS IN HIGH-MASS INFRARED DARK CLOUDS

    Energy Technology Data Exchange (ETDEWEB)

    Pillai, T.; Kauffmann, J. [California Institute of Technology, Cahill Center for Astronomy and Astrophysics, Pasadena, CA 91125 (United States); Tan, J. C. [University of Florida, Gainesville, FL 32611 (United States); Goldsmith, P. F. [Jet Propulsion Laboratory, California Institute of Technology, 4800 Oak Grove Drive, Pasadena, CA 91109 (United States); Carey, S. J. [Spitzer Science Center, California Institute of Technology, 1200 East California Boulevard, MC 314-6, Pasadena, CA 91125 (United States); Menten, K. M., E-mail: tpillai.astro@gmail.com [Max Planck Institut für Radioastronomie, Auf dem Hügel 69, D-53121 Bonn (Germany)

    2015-01-20

    High-mass stars are cosmic engines known to dominate the energetics in the Milky Way and other galaxies. However, their formation is still not well understood. Massive, cold, dense clouds, often appearing as infrared dark clouds (IRDCs), are the nurseries of massive stars. No measurements of magnetic fields in IRDCs in a state prior to the onset of high-mass star formation (HMSF) have previously been available, and prevailing HMSF theories do not consider strong magnetic fields. Here, we report observations of magnetic fields in two of the most massive IRDCs in the Milky Way. We show that IRDCs G11.11–0.12 and G0.253+0.016 are strongly magnetized and that the strong magnetic field is as important as turbulence and gravity for HMSF. The main dense filament in G11.11–0.12 is perpendicular to the magnetic field, while the lower density filament merging onto the main filament is parallel to the magnetic field. The implied magnetic field is strong enough to suppress fragmentation sufficiently to allow HMSF. Other mechanisms reducing fragmentation, such as the entrapment of heating from young stars via high-mass surface densities, are not required to facilitate HMSF.

  3. Fix It with TAPE: Repurposing Technology to Be Assistive Technology for Students with High-Incidence Disabilities

    Science.gov (United States)

    Bouck, Emily C.; Shurr, Jordan C.; Tom, Kinsey; Jasper, Andrea D.; Bassette, Laura; Miller, Bridget; Flanagan, Sara M.

    2012-01-01

    This article discusses how practitioners can repurpose technology--common and socially desirable technology in particular--to be assistive technology for students with high-incidence disabilities. The authors provide a framework for practitioners to consider technology for repurposing: TAPE (Transportable, Available, Practical, Engaging) and…

  4. [INVITED] Laser-induced forward transfer: A high resolution additive manufacturing technology

    Science.gov (United States)

    Delaporte, Philippe; Alloncle, Anne-Patricia

    2016-04-01

    Among the additive manufacturing techniques, laser-induced forward transfer addresses the challenges of printing thin films in solid phase or small volume droplets in liquid phase with very high resolution. This paper reviews the physics of this process and explores the pros and cons of this technology versus other digital printing technologies. The main field of applications are printed electronics, organic electronics and tissue engineering, and the most promising short terms ones concern digital laser printing of sensors and conductive tracks. Future directions and emerging areas of interest are discussed such as printing solid from a liquid phase and 3D digital nanomanufacturing.

  5. High-field proton MRS of human brain

    Energy Technology Data Exchange (ETDEWEB)

    Di Costanzo, Alfonso E-mail: alfonso.dicostanzo@unina2.it; Trojsi, F.; Tosetti, M.; Giannatempo, G.M.; Nemore, F.; Piccirillo, M.; Bonavita, S.; Tedeschi, G.; Scarabino, T

    2003-11-01

    Proton magnetic resonance spectroscopy ({sup 1}H-MRS) of the brain reveals specific biochemical information about cerebral metabolites, which may support clinical diagnoses and enhance the understanding of neurological disorders. The advantages of performing {sup 1}H-MRS at higher field strengths include better signal to noise ratio (SNR) and increased spectral, spatial and temporal resolution, allowing the acquisition of high quality, easily quantifiable spectra in acceptable imaging times. In addition to improved measurement precision of N-acetylaspartate, choline, creatine and myo-inositol, high-field systems allow the high-resolution measurement of other metabolites, such as glutamate, glutamine, {gamma}-aminobutyric acid, scyllo-inositol, aspartate, taurine, N-acetylaspartylglutamate, glucose and branched amino acids, thus extending the range of metabolic information. However, these advantages may be hampered by intrinsic field-dependent technical difficulties, such as decreased T2 signal, chemical shift dispersion errors, J-modulation anomalies, increased magnetic susceptibility, eddy current artifacts, limitations in the design of homogeneous and sensitive radiofrequency (RF) coils, magnetic field instability and safety issues. Several studies demonstrated that these limitations could be overcome, suggesting that the appropriate optimization of high-field {sup 1}H-MRS would expand the application in the fields of clinical research and diagnostic routine.

  6. High Field Seeking State Atom Laser and Properties of Flux

    Institute of Scientific and Technical Information of China (English)

    XIA Lin; XIONG Wei; YANG Fan; YI Lin; ZHOU Xiao-Ji; CHEN Xu-Zong

    2008-01-01

    We present an experimental study on the continuous atom laser. The experiments show that a high field seeking state atom laser with stable flux can be formed by increasing the strength of outcoupling before large density fluctuations appear. It is easy to obtain a long length or high speed output with this kind of atom laser.

  7. Magnetic Field Structure in a High-mass System

    NARCIS (Netherlands)

    Beuther, H.; Vlemmings, W. H. T.; Rao, R.; van der Tak, F. F. S.

    2010-01-01

    To characterize the magnetic field structure of the outflow and core region within a prototypical high-mass star-forming region, we analyzed polarized CO(3-2)-for the first time observed with the Submillimeter Array-as well as 880 mu m submillimeter continuum emission from the high-mass outflow/disk

  8. T1 and susceptibility contrast at high fields

    Science.gov (United States)

    Neelavalli, Jaladhar

    Clinical imaging at high magnetic field strengths (≥ 3Tesla) is sought after primarily due to the increased signal strength available at these fields. This increased SNR can be used to perform: (a) high resolution imaging in the same time as at lower field strengths; (b) the same resolution imaging with much faster acquisition; and (c) functional MR imaging (fMRI), dynamic perfusion and diffusion imaging with increased sensitivity. However they are also associated with increased power deposition (SAR) due to increase in imaging frequency and longer T1 relaxation times. Longer T1s mean longer imaging times for generating good T1 contrast images. On the other hand for faster imaging, at high fields fast spin echo or magnetization prepared sequences are conventionally proposed which are, however, associated with high SAR values. Imaging with low SAR is more and more important as we move towards high fields and particularly for patients with metallic implants like pacemakers or deep brain stimulator. The SAR limit acceptable for these patients is much less than the limit acceptable for normal subjects. A new method is proposed for imaging at high fields with good contrast with simultaneous reduction in power deposition. Further, T1 based contrast optimization problem in FLASH imaging is considered for tissues with different T1s but same spin densities. The solution providing optimal imaging parameters is simplified for quick and easy computation in a clinical setting. The efficacy of the simplification is evaluated and practical limits under which the simplification can be applied are worked out. The phase difference due to variation in magnetic susceptibility property among biological tissues is another unique source of contrast which is different from the conventional T1, T2 and T2* contrast. This susceptibility based phase contrast has become more and more important at high fields, partly due to contrast generation issues due to longer T 1s and shorter T2s and

  9. Optimal welding technology of high strength steel S690QL

    Directory of Open Access Journals (Sweden)

    Dusan Arsic

    2015-02-01

    Full Text Available In this paper is presented the detailed procedure for defining the optimal technology for welding the structures made of the high strength steel S690QL. That steel belongs into a group of steels with exceptional mechanical properties. The most prominent properties are the high tensile strength and impact toughness, at room and at elevated temperatures, as well. However, this steel has a negative characteristic - proneness to appearance of cold cracks.  That impedes welding and makes as an imperative to study different aspects of this steel's properties as well as those of eventual filler metal. Selection and defining of the optimal welding technology of this high strength steel is done for the purpose of preserving the favorable mechanical properties once the welded joint is realized; properties of the welded metal and the melting zone, as well as in the heat affected zone, which is the most critical zone of the welded joint.

  10. Integrative Production Technology for High-Wage Countries

    CERN Document Server

    2012-01-01

    Industrial production in high-wage countries like Germany is still at risk. Yet, there are many counter-examples in which producing companies dominate their competitors by not only compensating for their specific disadvantages in terms of factor costs (e.g. wages, energy, duties and taxes) but rather by minimising waste using synchronising integrativity as well as by obtaining superior adaptivity on alternating conditions. In order to respond to the issue of economic sustainability of industrial production in high-wage countries, the leading production engineering and material research scientists of RWTH Aachen University together with renowned companies have established the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”. This compendium comprises the cluster’s scientific results as well as a selection of business and technology cases, in which these results have been successfully implemented into industrial practice in close cooperation with more than 30 companies of ...

  11. Polarization of radiation of electrons in highly turbulent magnetic fields

    Science.gov (United States)

    Prosekin, A. Yu.; Kelner, S. R.; Aharonian, F. A.

    2016-09-01

    We study the polarization properties of the jitter and synchrotron radiation produced by electrons in highly turbulent anisotropic magnetic fields. The net polarization is provided by the geometry of the magnetic field the directions of which are parallel to a certain plane. Such conditions may appear in the relativistic shocks during the amplification of the magnetic field through the so-called Weibel instability. While the polarization properties of the jitter radiation allows extraction of direct information on the turbulence spectrum as well as the geometry of magnetic field, the polarization of the synchrotron radiation reflects the distribution of the magnetic field over its strength. For the isotropic distribution of monoenergetic electrons, we found that the degree of polarization of the synchrotron radiation is larger than the polarization of the jitter radiation. For the power-law energy distribution of electrons the relation between the degree of polarization of synchrotron and jitter radiation depends on the spectral index of the distribution.

  12. Polarization of radiation of electrons in highly turbulent magnetic fields

    CERN Document Server

    Prosekin, A Yu; Aharonian, F A

    2016-01-01

    We study the polarization properties of the jitter and synchrotron radiation produced by electrons in highly turbulent anisotropic magnetic fields. The net polarization is provided by the geometry of the magnetic field the directions of which are parallel to a certain plane. Such conditions may appear in the relativistic shocks during the amplification of the magnetic field through the so-called Weibel instability. While the polarization properties of the jitter radiation allows extraction of direct information on the turbulence spectrum as well as the geometry of magnetic field, the polarization of the synchrotron radiation reflects the distribution of the magnetic field over its strength. For the isotropic distribution of monoenergetic electrons, we found that the degree of polarization of the synchrotron radiation is larger than the polarization of the jitter radiation. For the power-law energy distribution of electrons the relation between the degree of polarization of synchrotron and jitter radiation dep...

  13. On the origin of high-field magnetic white dwarfs

    CERN Document Server

    García-Berro, E; Lorén-Aguilar, P; Aznar-Siguán, G; Camacho, J; Külebi, B; Isern, J; Althaus, L G; Córsico, A H

    2012-01-01

    High-field magnetic white dwarfs have been long suspected to be the result of stellar mergers. However, the nature of the coalescing stars and the precise mechanism that produces the magnetic field are still unknown. Here we show that the hot, convective, differentially rotating corona present in the outer layers of the remnant of the merger of two degenerate cores is able to produce magnetic fields of the required strength that do not decay for long timescales. We also show, using an state-of-the-art Monte Carlo simulator, that the expected number of high-field magnetic white dwarfs produced in this way is consistent with that found in the solar neighborhood.

  14. Microchip electrophoresis at elevated temperatures and high separation field strengths.

    Science.gov (United States)

    Mitra, Indranil; Marczak, Steven P; Jacobson, Stephen C

    2014-02-01

    We report free-solution microchip electrophoresis performed at elevated temperatures and high separation field strengths. We used microfluidic devices with 11 cm long separation channels to conduct separations at temperatures between 22 (ambient) and 45°C and field strengths from 100 to 1000 V/cm. To evaluate separation performance, N-glycans were used as a model system and labeled with 8-aminopyrene-1,3,6-trisulfonic acid to impart charge for electrophoresis and render them fluorescent. Typically, increased diffusivity at higher temperatures leads to increased axial dispersion and poor separation performance; however, we demonstrate that sufficiently high separation field strengths offset the impact of increased diffusivity in order to maintain separation efficiency. Efficiencies for these free-solution separations are the same at temperatures of 25, 35, and 45°C with separation field strengths ≥ 500 V/cm.

  15. Practical application of amorphous solar cells. High quality production technology

    Energy Technology Data Exchange (ETDEWEB)

    1984-08-01

    The targets of the project are to develop production technology of amorphous solar cells for electric power generation which will possess good reproducibility and be highly sensitive to solar light, and to elucidate their technological and economical applicability. During the years of from 1980 to 1982, studies on research and development of amorphous solar cells with multi-layer structure were made, and the conversion efficiency of the amorphous sollar cell was improved to 82.5% (10 cm square cell). (1) Amorphous growth equipment for continuous formation of tandem structure was designed and constructed. Boron concentration when grown in independent separate reaction chambers was found to be less than 1/10 of that grown in the single chanber. Film formation rate of 7/sup 0/ A/sec was achieved using Si/sub 2/H/sub 6/ for the growth of a-Si:H(i). (2) In the technology for stainless steel substrate modules, modules of the sizes specified by NEDO were assembled with the super strail structure employing tempered glass, achieving 4.7% conversion rate. (3) For materials and formation technology of the transparent conductive film grid electrode, light transmittance and resistance of the film made by sputtering evaporation of ITO film were studied. (4) As regards reliability technology, it was found that the tandem structure will greatly decreace the deterioration rate as compared with the single layer structure. The modules with super strait structre proved to be weatherproof. (4 figs)

  16. Patent Strategy at the Age of High Technology

    Science.gov (United States)

    Aoyama, Hirokazu

    This paper is a summary of the lecture which the author presented at the 5th Hokuriku Workshop for Study of Scientific and Technological Information Activities on the 17th of January in 1986. The author analyzed the present situation and made some suggestions on them ; (1) the role of patent system has shifted from introduction of foreign technologies to independent technological development at the age of high technology, (2) circumstances of rapidly increasing international patent war, particularly patent conflict between U.S. and Japan concerning U.S. ITC, (3) as the service of soft aspects of economy has been closed up, the new business has come to the fore front, and the move to consider technology as a good has been activated, (4) how patent specification should be written, the way of obtaining and protecting patent successfully, (5) basic pattern of patent strategy and what the strategy should be to respond to the enterprises level, (6) present situation of patent information service, effective use of patent maps and information strategy.

  17. Distributed Acoustic Sensing Technology in a Magmatic Geothermal Field - First Results From a Survey in Iceland

    Science.gov (United States)

    Reinsch, Thomas; Jousset, Philippe; Henninges, Jan; Blanck, Hanna

    2016-04-01

    Seismic methods are particularly suited for investigating the Earth's subsurface. Compared to surface-measurements , wellbore measurements can be used to acquire more detailed information about rock properties and possible fluid pathways within a geothermal reservoir. For high temperature geothermal wells, however, ambient temperatures are often far above the operating temperature range of conventional geophones. One way to overcome this limitation is the application of fiber optic sensor systems, where only the passive optical fiber is subjected to downhole conditions. Their applicability is thus determined by the operating temperature range of the optical fiber. Choosing appropriate fibers, such sensor systems can be operated at temperatures far above 200°C. Along an optical fiber, the distributed acoustic sensing technology (DAS) can be used to acquire acoustic signals with a high spatial and temporal resolution. Previous experiments have shown that the DAS technology is well suited for active seismic measurements. Within the framework of the EC funded project IMAGE, a fiber optic cable was deployed in a newly drilled geothermal well (RN-34) within the Reykjanes geothermal field, Iceland. Additionally, a >15 km fiber optic cable, already available at the surface, was connected to a DAS read-out unit. Acoustic data was acquired continuously for 9 days. Hammer shots were performed at the wellhead as well as along the surface cable in order to locate individual acoustic traces and calibrate the spatial distribution of the acoustic information. During the monitoring period both signals from on- and offshore explosive sources and natural seismic events could be recorded. We compare the fiber optic data to conventional seismic records from a dense seismic network deployed on the Reykjanes in the course of the IMAGE project. Here, first results from the seismic survey will be presented.

  18. Field Investigation of High Performance Pavements in Virginia

    OpenAIRE

    2005-01-01

    This study evaluated 18 pavement sections located in high-traffic highways in Virginia to find a premium pavement design with a life span of 40 years or more using current and past field experience. The selected pavement sections were thought to perform well. Eight flexible pavements, six composite pavements, two continuously reinforced concrete pavements, and two jointed plain concrete pavements were investigated. Field testing consisted of (1) falling weight deflectometer (FWD) testing to a...

  19. Experimental evidence for Froehlich superconductivity in high magnetic fields

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, N. [National High Magnetic Field Laboratory, LANL, MS-E536, Los Alamos, NM (United States)]. E-mail: nharrison@lanl.gov; Mielke, C.H.; Singleton, J. [National High Magnetic Field Laboratory, LANL, MS-E536, Los Alamos, NM (United States); Brooks, J.S. [National High Magnetic Field Laboratory, Florida State University, Tallahassee, FL (United States); Tokumoto, M. [Electrotechnical Laboratory, Tsukuba, Ibaraki (Japan)

    2001-05-14

    Resistivity and irreversible magnetization data taken within the high magnetic field CDW{sub x} phase of the quasi-two-dimensional organic metal {alpha}-(BEDT-TTF){sub 2}KHg(SCN){sub 4} are shown to be consistent with a field-induced inhomogeneous superconducting phase. In-plane skin depth measurements show that the resistive transition on entering the CDW{sub x} phase is both isotropic and representative of the bulk. (author). Letter-to-the-editor.

  20. High field optical nonlinearity and the Kramers-Kronig relations.

    Science.gov (United States)

    Wahlstrand, J K; Cheng, Y-H; Milchberg, H M

    2012-09-14

    The nonlinear optical response to high fields is absolutely measured for the noble gas atoms He, Ne, Ar, Kr, and Xe. We find that the response is quadratic in the laser field magnitude up to the ionization threshold of each gas. Its size and quadratic dependence are well predicted by a Kramers-Kronig analysis employing known ionization probabilities, and the results are consistent with calculations using the time-dependent Schrödinger equation.

  1. Magnetic Fields in High-Mass Infrared Dark Clouds

    CERN Document Server

    Pillai, Thushara; Tan, Jonathan; Goldsmith, Paul; Carey, Sean; Menten, Karl

    2014-01-01

    High-mass Stars are cosmic engines known to dominate the energetics in the Milky Way and other galaxies. However, their formation is still not well understood. Massive, cold, dense clouds, often appearing as Infrared Dark Clouds (IRDCs), are the nurseries of massive stars. No measurements of magnetic fields in IRDCs in a state prior to the onset of high-mass star formation (HMSF) have previously been available, and prevailing HMSF theories do not consider strong magnetic fields. Here, we report observations of magnetic fields in two of the most massive IRDCs in the Milky Way. We show that IRDCs G11.11-0.12 and G0.253+0.016 are strongly magnetized and that the strong magnetic field is as important as turbulence and gravity for HMSF. The main dense filament in G11.11-0.12 is perpendicular to the magnetic field, while the lower density filament merging onto the main filament is parallel to the magnetic field. The implied magnetic field is strong enough to suppress fragmentation sufficiently to allow HMSF. Other ...

  2. Magnetic Properties of Erbium Gallium Gallate under High Magnetic Field

    Institute of Scientific and Technical Information of China (English)

    Zhang Xijuan; Cheng Haiying; Yang Cuihong; Wang Wei

    2004-01-01

    A theoretical investigation on the magnetic properties of rare-earth Er3+ in Er3 Ga5 O12 was reported. The average magnetic moments(M) for applied magnetic field H parallel to the [001 ], [ 100], [ 110], [ 111 ] direction was studied based on the quantum theory. Temperature dependence of the magnetic properties is analyzed for H applied parallel to the [ 100] and [ 111 ] crystallographic directions. The magnetization decreases with increasing temperature,showing good agreement with thermal effect. A strong anisotropy of the magnetization is found under high magnetic field, but when the magnetic field is small, M and H are proportional.

  3. High Dynamic Range Electric Field Sensor for Electromagnetic Pulse Detection

    CERN Document Server

    Lin, Che-Yun; Lee, Beom Suk; Zhang, Xingyu; Chen, Ray T

    2014-01-01

    We design a high dynamic range electric field sensor based on domain inverted electro-optic (E-O) polymer Y-fed directional coupler for electromagnetic wave detection. This electrode-less, all optical, wideband electrical field sensor is fabricated using standard processing for E-O polymer photonic devices. Experimental results demonstrate effective detection of electric field from 16.7V/m to 750KV/m at a frequency of 1GHz, and spurious free measurement range of 70dB.

  4. Field-reversed configuration maintained by rotating magnetic field with high spatial harmonics.

    Science.gov (United States)

    Inomoto, Michiaki; Kitano, Katsuhisa; Okada, Shigefumi

    2007-10-26

    Field-reversed configurations (FRCs) driven by rotating magnetic fields (RMFs) with spatial high harmonics have been studied in the metal flux conserver of the FRC injection experiment. The experimental results show that the fundamental RMF component is observed to penetrate the plasma column, while the high harmonics are screened at the plasma edge due to their slower or reversed rotation. This selective penetration of the RMF provides good compatibility of radial and azimuthal force balances; significant radial inward force mostly from the high-harmonic components, and sufficient azimuthal torque solely provided by the fundamental component.

  5. The development of advanced robotics technology in high radiation environment

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yong Bum; Cho, Jaiwan; Lee, Nam Ho; Choi, Young Soo; Park, Soon Yong; Lee, Jong Min; Park, Jin Suk; Kim, Seung Ho; Kim, Byung Soo; Moon, Byung Soo

    1997-07-01

    In the tele-operation technology using tele-presence in high radiation environment, stereo vision target tracking by centroid method, vergence control of stereo camera by moving vector method, stereo observing system by correlation method, horizontal moving axis stereo camera, and 3 dimensional information acquisition by stereo image is developed. Also, gesture image acquisition by computer vision and construction of virtual environment for remote work in nuclear power plant. In the development of intelligent control and monitoring technology for tele-robot in hazardous environment, the characteristics and principle of robot operation. And, robot end-effector tracking algorithm by centroid method and neural network method are developed for the observation and survey in hazardous environment. 3-dimensional information acquisition algorithm by structured light is developed. In the development of radiation hardened sensor technology, radiation-hardened camera module is designed and tested. And radiation characteristics of electric components is robot system is evaluated. Also 2-dimensional radiation monitoring system is developed. These advanced critical robot technology and telepresence techniques developed in this project can be applied to nozzle-dam installation /removal robot system, can be used to realize unmanned remotelization of nozzle-dam installation / removal task in steam generator of nuclear power plant, which can be contributed for people involved in extremely hazardous high radioactivity area to eliminate their exposure to radiation, enhance their task safety, and raise their working efficiency. (author). 75 refs., 21 tabs., 15 figs.

  6. New technologies for ultra-high throughput genotyping in plants.

    Science.gov (United States)

    Appleby, Nikki; Edwards, David; Batley, Jacqueline

    2009-01-01

    Molecular genetic markers represent one of the most powerful tools for the analysis of plant genomes and the association of heritable traits with underlying genetic variation. Molecular marker technology has developed rapidly over the last decade, with the development of high-throughput genotyping methods. Two forms of sequence-based marker, simple sequence repeats (SSRs), also known as microsatellites and single nucleotide polymorphisms (SNPs) now predominate applications in modern plant genetic analysis, along the anonymous marker systems such as amplified fragment length polymorphisms (AFLPs) and diversity array technology (DArT). The reducing cost of DNA sequencing and increasing availability of large sequence data sets permits the mining of this data for large numbers of SSRs and SNPs. These may then be used in applications such as genetic linkage analysis and trait mapping, diversity analysis, association studies and marker-assisted selection. Here, we describe automated methods for the discovery of molecular markers and new technologies for high-throughput, low-cost molecular marker genotyping. Genotyping examples include multiplexing of SSRs using Multiplex-Ready marker technology (MRT); DArT genotyping; SNP genotyping using the Invader assay, the single base extension (SBE), oligonucleotide ligation assay (OLA) SNPlex system, and Illumina GoldenGate and Infinium methods.

  7. High magnetic field science and its application in the United States current status and future directions

    CERN Document Server

    National Research Council of the National Academies

    2013-01-01

    The Committee to Assess the Current Status and Future Direction of High Magnetic Field Science in the United States was convened by the National Research Council in response to a request by the National Science Foundation. This report answers three questions: (1) What is the current state of high-field magnet science, engineering, and technology in the United States, and are there any conspicuous needs to be addressed? (2) What are the current science drivers and which scientific opportunities and challenges can be anticipated over the next ten years? (3) What are the principal existing and planned high magnetic field facilities outside of the United States, what roles have U.S. high field magnet development efforts played in developing those facilities, and what potentials exist for further international collaboration in this area? A magnetic field is produced by an electrical current in a metal coil. This current exerts an expansive force on the coil, and a magnetic field is "high" if it challenges the str...

  8. Improving NASICON Sinterability through Crystallization under High Frequency Electrical Fields

    Directory of Open Access Journals (Sweden)

    Ilya eLisenker

    2016-03-01

    Full Text Available The effect of high frequency (HF electric fields on the crystallization and sintering rates of a lithium aluminum germanium phosphate (LAGP ion conducting ceramic was investigated. LAGP with the nominal composition Li1.5Al0.5Ge1.5(PO43 was crystallized and sintered, both conventionally and under effect of electrical field. Electrical field application, of 300V/cm at 1MHz, produced up to a 40% improvement in sintering rate of LAGP that was crystallized and sintered under the HF field. Heat sink effect of the electrodes appears to arrest thermal runaway and subsequent flash behavior. Sintered pellets were characterized using XRD, SEM, TEM and EIS to compare conventionally and field sintered processes. The as-sintered structure appears largely unaffected by the field as the sintering curves tend to converge beyond initial stages of sintering. Differences in densities and microstructure after 1 hour of sintering were minor with measured sintering strains of 31% vs. 26% with and without field, respectively . Ionic conductivity of the sintered pellets was evaluated and no deterioration due to the use of HF field was noted, though capacitance of grain boundaries due to secondary phases was significantly increased.

  9. NMR in High Fields and Field Gradients up to 42 T

    Science.gov (United States)

    Sigmund, Eric E.

    2002-03-01

    We describe nuclear magnetic resonance (NMR) experiments performed in fields as high as 42 T. This work was done at Northwestern University and the National High Magnetic Field Laboratory (NHMFL) with superconducting magnets, resistive Bitter-style electromagnets, and a superconducting-resistive hybrid magnet. After reviewing crucial probe and spectrometer design features, we describe the scientific and technical advantages that high field provides for two experiments. First, we studied the mixed state of the high-temperature superconductor YBa_2Cu_3O_7-x through ^17O NMR.[1] The NMR spectrum gives the field distribution associated with vortices which we use to selectively inspect regions inside and outside the vortex core. We use the spin-lattice relaxation rate (T_1-1) to probe the electronic density-of-states in this spatially resolved fashion. Second, we have studied ultraslow diffusion in glass-forming liquids such as glycerol. These studies use the high magnetic field gradient at the edge of the solenoid, which can exceed 200 T/m for the resistive magnets at the NHMFL. We employed a 4 K inductive shield to stabilize the fluctuations in the resistive magnets' applied field over the necessarily long timescales of a slow diffusion NMR experiment. We have also made use of fast frequency jumping to enhance signal-to-noise by circumventing the finite spatial excitation bandwidth imposed by the large gradient. We show NMR experiments of slow diffusion in glass-formers up to high field (H0 = 21 T, G = 220 T/m) that have resolved diffusivities as low as 10-10 cm^2/s. [1] V. F. Mitrovic et.al., Nature 413, 501-504 (2001).

  10. STUDY ON A HIGH PERFORMANCE INTEGRATED BEEKEEPING TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    A POPESCU

    2003-10-01

    Full Text Available This study aimed to make an economic evaluation of a high performance modern beekeeping technology leading to an increased bee family capacity. The new technology removes the disadvantages of the traditional one utilising just natural picking based on Robinia, Lime, sunflower and wild flora, most of times deeply affected by unfavourable climate conditions (drought, rainfalls and conducting to important bee losses during the winter season and mainly during the critical period till the next picking. The modern technology assures 75 % more bees per family, an increased queen laying capacity by 33 %,, a 50 % reduction of bee loss in winter season, by 20 % more honey , by 50 % more propolis, by 33 % more pollen, by 50 % more swarms, by 60 % more royal jelly and by 50 % more bee venom. The modern technology is based on a scientific feeding management applying a stimulating, completing and proteinic feeding (pollen cake and/or pollen substitutes such as: degreased powder milk 30 % and soya bean cake, involving peculiar costs ranking between USD 9.73-10.06 per family/year. The total bee rearing costs have been estimated at USD 17.83 in average per family/year, of which: 55.5 % feeding costs, 6.8 % queen replacement cost, 3.2 % treatments cost, 13.5 % costs for supplying new frames and combs,17.4 % transportation costs for moving of bee families and the remaining of 3.6 % labour costs. Taking into account a standard apiary (100 bee families of an increased power, a beekeeper can obtain an USD 12,100.4 annual income, by 55.9 % higher than in case of the traditional beekeeping technology. As a conclusion, the new technology assures a higher biological and economical efficiency, USD 3,350 profit gain that is a profit by 48 % higher than in case of the classic technology. For this reason, we recommend this modern technology to be implemented by beekeepers if they would like to transform their apiaries into high performance commercial farms.

  11. Zero-field nuclear magnetic resonance in high field by modulated rf sequences.

    Science.gov (United States)

    Nishiyama, Yusuke; Yamazaki, Toshio

    2007-04-07

    The authors propose a novel approach to design and evaluate sequences for zero-field NMR spectra in high field (ZFHF) by using amplitude and phase modulated rf sequences. ZFHF provide sharp peaks for the dipolar interaction between two nuclear spins even if the orientation of the molecules is distributed. The internuclear distance r can be directly obtained from the peak position which is proportional to r-3. Numerous ZFHF sequences are obtained. A sequence is selected from them by the systematic evaluation of the sequences. The new ZFHF sequence is less affected by chemical shift anisotropy (CSA) than the previous sequences; the sequence can be used for systems with large CSA such as a dipolar coupled 13C-pair system under realistically high field. 13C ZFHF spectra of 13C2 diammonium succinate and 13C2 diammonium oxalate were observed under the 9.4 T field.

  12. High-Energy-Low-Temperature Technologies for the Synthesis of Nanoparticles: Microwaves and High Pressure

    Directory of Open Access Journals (Sweden)

    Witold Lojkowski

    2014-11-01

    Full Text Available Microwave Solvothermal Synthesis (MSS is a chemical technology, where apart from possible effects of microwaves on the chemical reaction paths, microwave heating allows the precise planning of a time-temperature schedule, as well as to achieve high super-saturation of the reagents uniformly in the reactor vessel. Thus, MSS is suitable for production of nanoparticles with small grain size distribution and a high degree of crystallinity. A further advantage of the technology is a much lower synthesis temperature than for gas phase, plasma or sol-gel technologies. New reactors have been developed to exploit these advantages of the MSS technology of nanoparticles synthesis and to scale up the production rate. Reactor design and realization has been shown to be decisive and critical for the control of the MSS technology. Examples of oxidic and phosphatic nanoparticles synthesis have been reported.

  13. FIELD DEMONSTRATION OF EMERGING PIPE WALL INTEGRITY ASSESSMENT TECHNOLOGIES FOR LARGE CAST IRON WATER MAINS

    Science.gov (United States)

    The U.S. Environmental Protection Agency sponsored a large-scale field demonstration of innovative leak detection/location and condition assessment technologies on a 76-year old, 2,500-ft long, cement-lined, 24-in. cast iron water main in Louisville, KY from July through Septembe...

  14. The Developing Field of Technology Education: A Review to Look Forward

    Science.gov (United States)

    Jones, Alister; Buntting, Cathy; de Vries, Marc J.

    2013-01-01

    This paper attempts to review the development of technology education over the last 20-25 years. The purpose is to reflect on how far the field has come and where it might go to, including what questions need to be considered in its ongoing development. The data for this paper draw on our work in developing "The International Handbook of Research…

  15. SATELLITE GRAVITY SURVEYING TECHNOLOGY AND RESEARCH OF EARTH'S GRAVITY FIELD

    Institute of Scientific and Technical Information of China (English)

    NingJinsheng

    2003-01-01

    This is a summarized paper.Two topics are discussed:Firstly,the comcept,development and application of four kinds of satellite gravity surveying technology are introduced;Secondly,some problems of theory and method,which must be considered in the study lf the Earth's gravity field based on satellite gravity data,are expounded.

  16. Preservice Science Teachers' Field Experiences with Educational Technologies as Part of Portfolio Development: A Turkish Perspective

    Science.gov (United States)

    Korkmaz, Hunkar; Gucum, Berna; Hakverdi, Meral

    2006-01-01

    The purpose of this study is to assess the usage of educational technology of pre-service science teachers in their field experiences. This study was carried out on 45 pre-service science teachers taking School Experience and Practice Teaching courses at Hacettepe University in Turkey. The data were obtained from the evaluation of pre-service…

  17. Facilitating Collaboration across Science, Technology, Engineering & Mathematics (STEM) Fields in Program Development

    Science.gov (United States)

    Ejiwale, James A.

    2014-01-01

    Collaboration plays a major role in interdisciplinary activities among Science, Technology, Engineering & Mathematics (STEM) disciplines or fields. It also affects the relationships among cluster members on the management team. Although effective collaboration does not guarantee success among STEM disciplines, its absence usually assures…

  18. Large Scale Structures at High Redshift in the GOODS Field

    CERN Document Server

    Castellano, M; Trevese, D; Pentericci, L; Grazian, A; Fontana, A; Giallongo, E; Santini, P; Cristiani, S; Nonino, M; Vanzella, E

    2008-01-01

    We present a catalogue of overdensities in the GOODS-South field. We find various high density peaks that are embedded in structures diffused on the entire field, up to z ~ 2.5. The slope of their colour-magnitude relation does not show significative evolution with z. We find evidence that galaxies forming these structures are more massive than galaxies located in low density regions. We also analyse the variation of galaxy properties with the associated environmental density and we find that the segregation of red galaxies with density is stronger at low redshift and at high luminosities while it gets much weaker for increasing z.

  19. Study of HTS Wires at High Magnetic Fields

    Energy Technology Data Exchange (ETDEWEB)

    Turrioni, D.; Barzi, E.; Lamm, M.J.; Yamada, R.; Zlobin, A.V.; Kikuchi, A.; /Fermilab

    2009-01-01

    Fermilab is working on the development of high field magnet systems for ionization cooling of muon beams. The use of high temperature superconducting (HTS) materials is being considered for these magnets using Helium refrigeration. Critical current (I{sub c}) measurements of HTS conductors were performed at FNAL and at NIMS up to 28 T under magnetic fields at zero to 90 degree with respect to the sample face. A description of the test setups and results on a BSCCO-2223 tape and second generation (2G) coated conductors are presented.

  20. Benchmarking International High-Technology Research Laboratories' Marketing in Europe

    OpenAIRE

    Salonen, Suvi-Anna

    2014-01-01

    The thesis studies current marketing conventions of international high-technology research laboratories in Europe and is done for the UNELMA-project. UNELMA is a joint project between Finnish and Swedish universities and institutions funded by the European Union, the Provincial Government of Norbotten, Lapin Liitto and Interreg IV A. The project wishes to create a network of professional services which will benefit companies in the Bothnian Arc between Finland and Sweden. The study itself...

  1. Diffusion of multi-generational high-technology products

    OpenAIRE

    Shi, Xiaohui; Fernandes, Kiran,; Chumnumpan, Pattarin

    2014-01-01

    Previous multi-generational product diffusion (MGPD) models were developed based on the diffusion patterns at that time, but may not be adopted in today’s cases. By incorporating the effect of customers’ forward-looking behaviour, this paper offers a parsimonious and original model that captures the dynamics of MGPD in current high-technology markets. We empirically examine the feasibility of using previous MGPD models and our suggested model to explain the market growth of new products from ...

  2. GravityCam: wide-field, high-resolution imaging and high-speed photometry instrument

    Science.gov (United States)

    MacKay, Craig; Dominik, Martin; Steele, Iain

    2016-08-01

    The limits to the angular resolution achievable with conventional ground-based telescopes are unchanged over 70 years. Atmospheric turbulence limits image quality to typically 1 arcsec in practice. We have developed a new concept of ground-based imaging instrument called GravityCam capable of delivering significantly sharper images from the ground than is normally possible without adaptive optics. The acquisition of visible images at high speed without significant noise penalty has been made possible by advances in optical and near IR imaging technologies. Images are recorded at high speed and then aligned before combination and can yield a 3-5 fold improvement in image resolution. Very wide survey fields are possible with widefield telescope optics. We describe GravityCam and detail its application to accelerate greatly the rate of detection of Earth size planets by gravitational microlensing. GravityCam will also improve substantially the quality of weak shear studies of dark matter distribution in distant clusters of galaxies. The microlensing survey will also provide a vast dataset for asteroseismology studies. In addition, GravityCam promises to generate a unique data set that will help us understand of the population of the Kuiper belt and possibly the Oort cloud.

  3. Numerical evaluation of E-fields induced by body motion near high-field MRI scanner.

    Science.gov (United States)

    Crozier, S; Liu, F

    2004-01-01

    In modern magnetic resonance imaging (MRI), both patients and radiologists are exposed to strong, nonuniform static magnetic fields inside or outside of the scanner, in which the body movement may be able to induce electric currents in tissues which could be possibly harmful. This paper presents theoretical investigations into the spatial distribution of induced E-fields in the human model when moving at various positions around the magnet. The numerical calculations are based on an efficient, quasistatic, finite-difference scheme and an anatomically realistic, full-body, male model. 3D field profiles from an actively-shielded 4 T magnet system are used and the body model projected through the field profile with normalized velocity. The simulation shows that it is possible to induce E-fields/currents near the level of physiological significance under some circumstances and provides insight into the spatial characteristics of the induced fields. The results are easy to extrapolate to very high field strengths for the safety evaluation at a variety of field strengths and motion velocities.

  4. Recent Advances in Food Processing Using High Hydrostatic Pressure Technology.

    Science.gov (United States)

    Wang, Chung-Yi; Huang, Hsiao-Wen; Hsu, Chiao-Ping; Yang, Binghuei Barry

    2016-01-01

    High hydrostatic pressure is an emerging non-thermal technology that can achieve the same standards of food safety as those of heat pasteurization and meet consumer requirements for fresher tasting, minimally processed foods. Applying high-pressure processing can inactivate pathogenic and spoilage microorganisms and enzymes, as well as modify structures with little or no effects on the nutritional and sensory quality of foods. The U.S. Food and Drug Administration (FDA) and the U.S. Department of Agriculture (USDA) have approved the use of high-pressure processing (HPP), which is a reliable technological alternative to conventional heat pasteurization in food-processing procedures. This paper presents the current applications of HPP in processing fruits, vegetables, meats, seafood, dairy, and egg products; such applications include the combination of pressure and biopreservation to generate specific characteristics in certain products. In addition, this paper describes recent findings on the microbiological, chemical, and molecular aspects of HPP technology used in commercial and research applications.

  5. High-technology medicine and the old: the dialysis example.

    Science.gov (United States)

    Kjellstrand, C M

    1996-03-01

    High-technology medicine, which is often expensive, and most often very useful for old people, whose numbers are rapidly increasing, is presenting huge moral problems for physicians. There are now pressures to make physicians salaried employees rather than professionals, and this will decrease or obliterate their efficiency as advocates for patients. Advocacy is a previously non-described duty, which is an important ethical principle for physicians, in addition to the four universally recognized principles: beneficence, non-maleficence, respect for autonomy, and justice. Not-so-subtle economic pressure by managed care, government, administrators, and politicians, is already in force. If physicians, by advocating expensive treatment for many, irritate those with economic power, they may violently retaliate. Chronic dialysis illustrates well the dilemma of high-technology medicine because acceptance numbers are accurate and widely known, most patients are old, the treatment is rationed everywhere by age, and, as patients die if excluded, it can be used to analyse reactions to an ongoing age rationing. Post-modern bioethics and moral philosophy appears helpless and, in some regards, irrelevant in elucidating and solving the concrete moral conflict posed by high-technology medicine and the old. Administrators and politicians wish physicians to be society's economic gatekeepers; however, this is incompatible with classical ethical concepts of the profession of physicians. Physicians and their professional organizations had better realize this in order to map out defensive strategies so that physicians, as a profession, do not disappear.

  6. Increasing Heavy Oil Reserves in the Wilmington Oil Field through Advanced Reservoir Characterization and Thermal Production Technologies

    Energy Technology Data Exchange (ETDEWEB)

    City of Long Beach; David K.Davies and Associates; Tidelands Oil Production Company; University of Southern California

    1999-06-25

    The objective of this project is to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California. This is realized through the testing and application of advanced reservoir characterization and thermal production technologies. It is hoped that the successful application of these technologies will result in their implementation throughout the Wilmington Field and through technology transfer, will be extended to increase the recoverable oil reserves in other slope and basin clastic (SBC) reservoirs. The existing steamflood in the Tar zone of Fault Block (FB) II-A has been relatively insufficient because of several producability problems which are common in SBC reservoir; inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil and non-uniform distribution of the remaining oil. This has resulted in poor sweep efficiency, high steam-oil ratios, and early breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves.

  7. Coincidence spectroscopy of high-lying Rydberg states produced in strong laser fields

    Science.gov (United States)

    Larimian, Seyedreza; Erattupuzha, Sonia; Lemell, Christoph; Yoshida, Shuhei; Nagele, Stefan; Maurer, Raffael; Baltuška, Andrius; Burgdörfer, Joachim; Kitzler, Markus; Xie, Xinhua

    2016-09-01

    We demonstrate the detection of high-lying Rydberg states produced in strong laser fields with coincidence spectroscopy. Electron emission after the interaction of strong laser pulses with atoms and molecules is measured together with the parent ions in coincidence measurements. These electrons originate from high-lying Rydberg states with quantum numbers from n ˜20 up to n ≲120 formed by frustrated field ionization. Ionization rates are retrieved from the measured ionization signal of these Rydberg states. Simulations show that both tunneling ionization by a weak dc field and photoionization by blackbody radiation contribute to delayed electron emission on the nano- to microsecond scale. Furthermore, the dependence of the Rydberg-state production on the ellipticity of the driving laser field indicates that such high-lying Rydberg states are populated through electron recapture. The present experiment provides detailed quantitative information on Rydberg production in strong-field interaction.

  8. Multi-aperture ultra-high-speed imaging with lateral electric field charge modulators

    Science.gov (United States)

    Kagawa, K.; Mochizuki, F.; Seo, M.-W.; Yasutomi, K.; Kawahito, S.

    2016-03-01

    The time resolution of charge modulation in CMOS image sensors has entered the sub-nano second regime and is still reducing toward tens of pico-second. The lateral electric field modulators (LEFM) invented at Shizuoka University has significantly contributed to the recent progress in the solid-state time-resolved imaging field. Based on the LEFM technology, we are developing ultra-high-speed CMOS image sensors whose frame rate or time resolution is determined only by the charge modulation speed. In this presentation, the concept, architecture, example of implementation, and demonstration of 200Mfps single-shot video capturing based on our scheme are shown.

  9. Nb3Sn High Field Magnets for the High Luminosity LHC Upgrade Project

    Energy Technology Data Exchange (ETDEWEB)

    Ambrosio, Giorgio

    2015-06-01

    The High Luminosity upgrade of the Large Hadron Collider at CERN requires a new generation of high field superconducting magnets. High field large aperture quadrupoles (MQXF) are needed for the low-beta triplets close to the ATLAS and CMS detectors, and high field two-in-one dipoles (11 T dipoles) are needed to make room for additional collimation. The MQXF quadrupoles, with a field gradient of 140 T/m in 150 mm aperture, have a peak coil field of 12.1 T at nominal current. The 11 T dipoles, with an aperture of 60 mm, have a peak coil field of 11.6 T at nominal current. Both magnets require Nb3Sn conductor and are the first applications of this superconductor to actual accelerator magnets.

  10. The AKARI Deep Field South: Pushing to High Redshift

    CERN Document Server

    Clements, David L

    2016-01-01

    The AKARI Deep Field South (ADF-S) is a large extragalactic survey field that is covered by multiple instruments, from optical to far-IR and radio. I summarise recent results in this and related fields prompted by the release of the Herschel far-IR/submm images, including studies of cold dust in nearby galaxies, the identification of strongly lensed distant galaxies, and the use of colour selection to find candidate very high redshift sources. I conclude that the potential for significant new results from the ADF-S is very great. The addition of new wavelength bands in the future, eg. from Euclid, SKA, ALMA and elsewhere, will boost the importance of this field still further.

  11. Rehabilitation of Mature Gas Fields in Romania: Success Through Integration of Management Processes and New Technology

    Directory of Open Access Journals (Sweden)

    Louboutin Michel

    2004-09-01

    Full Text Available Nature oil and gas fields are difficult to rehabilitate effectively because of the economics of declining production. Many fields are abandoned prematurely when their life could be prolonged significantly through application of new technology. Romgaz (a national exploration and production company and Schlumberger (an integrated oilfield services company developed a new business model to overcome these obstacles. The key to success of this model, which is being applied to gas fields in the Transylvanian basin of Romania, is the shared risk and shared reward for the two companies. Integrated management processes addressing the complete system from reservoir to wellbore to surface/transmission facilities and application of new technology (logging, perforation, etc. have resulted in multifold increases in production.

  12. Service robotics: an emergent technology field at the interface between industry and services.

    Science.gov (United States)

    Ott, Ingrid

    2012-12-01

    The paper at hand analyzes the economic implications of service robots as expected important future technology. The considerations are embedded into global trends, focusing on the interdependencies between services and industry not only in the context of the provision of services but already starting at the level of the innovation process. It is argued that due to the various interdependencies combined with heterogenous application fields, the resulting implications need to be contextualized. Concerning the net labor market effects, it is reasonable to assume that the field of service robotics will generate overall job creation that goes along with increasing skill requirements demanded from involved employees. It is analyzed which challenges arise in evaluating and further developing the new technology field and some policy recommendations are given.

  13. Low-field MRI can be more sensitive than high-field MRI

    Science.gov (United States)

    Coffey, Aaron M.; Truong, Milton L.; Chekmenev, Eduard Y.

    2013-12-01

    MRI signal-to-noise ratio (SNR) is the key factor for image quality. Conventionally, SNR is proportional to nuclear spin polarization, which scales linearly with magnetic field strength. Yet ever-stronger magnets present numerous technical and financial limitations. Low-field MRI can mitigate these constraints with equivalent SNR from non-equilibrium ‘hyperpolarization' schemes, which increase polarization by orders of magnitude independently of the magnetic field. Here, theory and experimental validation demonstrate that combination of field independent polarization (e.g. hyperpolarization) with frequency optimized MRI detection coils (i.e. multi-turn coils using the maximum allowed conductor length) results in low-field MRI sensitivity approaching and even rivaling that of high-field MRI. Four read-out frequencies were tested using samples with identical numbers of 1H and 13C spins. Experimental SNRs at 0.0475 T were ∼40% of those obtained at 4.7 T. Conservatively, theoretical SNRs at 0.0475 T 1.13-fold higher than those at 4.7 T were possible despite an ∼100-fold lower detection frequency, indicating feasibility of high-sensitivity MRI without technically challenging, expensive high-field magnets. The data at 4.7 T and 0.0475 T was obtained from different spectrometers with different RF probes. The SNR comparison between the two field strengths accounted for many differences in parameters such as system noise figures and variations in the probe detection coils including Q factors and coil diameters.

  14. High Speed Multiple Valued Logic Full Adder Using Carbon Nano Tube Field Effect Transistor

    CERN Document Server

    Khatir, Ashkan; Mahmoudi, Iman

    2011-01-01

    High speed Full-Adder (FA) module is a critical element in designing high performance arithmetic circuits. In this paper, we propose a new high speed multiple-valued logic FA module. The proposed FA is constructed by 14 transistors and 3 capacitors, using carbon nano-tube field effect transistor (CNFET) technology. Furthermore, our proposed technique has been examined in different voltages (i.e., 0.65v and 0.9v). The observed results reveal power consumption and power delay product (PDP) improvements compared to existing FA counterparts

  15. ULTRA HIGH SPEED FACTORIAL DESIGN IN SUB-NANOMETER TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Arindam Banerjee

    2013-02-01

    Full Text Available This work proposes a high speed and low power factorial design in 22nm technology and also it counts the effect of sub nano-meter constraints on this circuit. A comparative study for this design has been done for 90nm, 45nm and 22nm technology. The rise in circuit complexity and speed is accompanied by the scaling of MOSFET’s. The transistor saturation current Idsat is an important parameter because the transistor current determines the time needed to charge and discharge the capacitive loads on chip, and thus impacts the product speed more than any other transistor parameter. The efficient implementation of a factorial number is carried out by using a decremented and multipliers which has been lucidly discussed in this paper. Normally in a factorial module a number is calculated as the iterative multiplication of the given number to the decremented value of the given number. A Parallel adder based decremented has been proposed for calculating the factorial of any number that also includes 0 and 1. The performances are calculated by using the existing 90-nm CMOS technology and scaling down the existing technology to 45-nm and 22-nm.

  16. Screening and synthesis: high throughput technologies applied to parasitology.

    Science.gov (United States)

    Morgan, R E; Westwood, N J

    2004-01-01

    High throughput technologies continue to develop in response to the challenges set by the genome projects. This article discusses how the techniques of both high throughput screening (HTS) and synthesis can influence research in parasitology. Examples of the use of targeted and phenotype-based HTS using unbiased compound collections are provided. The important issue of identifying the protein target(s) of bioactive compounds is discussed from the synthetic chemist's perspective. This article concludes by reviewing recent examples of successful target identification studies in parasitology.

  17. Superconductor Requirements and Characterization for High Field Accelerator Magnets

    Energy Technology Data Exchange (ETDEWEB)

    Barzi, E.; Zlobin, A. V.

    2015-05-01

    The 2014 Particle Physics Project Prioritization Panel (P5) strategic plan for U.S. High Energy Physics (HEP) endorses a continued world leadership role in superconducting magnet technology for future Energy Frontier Programs. This includes 10 to 15 T Nb3Sn accelerator magnets for LHC upgrades and a future 100 TeV scale pp collider, and as ultimate goal that of developing magnet technologies above 20 T based on both High Temperature Superconductors (HTS) and Low Temperature Superconductors (LTS) for accelerator magnets. To achieve these objectives, a sound conductor development and characterization program is needed and is herein described. This program is intended to be conducted in close collaboration with U.S. and International labs, Universities and Industry.

  18. High School Students' Understandings and Representations of the Electric Field

    CERN Document Server

    Cao, Ying

    2014-01-01

    This study investigates the understandings and representations of the electric field expressed by Chinese high school students ages 15 to 16 who have not yet received high school-level physics instruction. The literature has reported students' ideas of the electric field post-instruction as indicated by their performance on textbook-style questionnaires. However, by relying on measures such as questionnaires, previous research has inadequately captured the thinking process that led students to answer questions in the ways that they did. The present study portrays the beginning of this process by closely examining students' understandings pre-instruction. The participants in this study were asked to engage in a lesson that included informal group tasks that involved playing a Web-based hockey game that replicated an electric field and drawing comic strips that used charges as characters. The lesson was videotaped, students' work was collected, and three students were interviewed afterward to ascertain more det...

  19. Reflection type metasurface designed for high efficiency vectorial field generation

    Science.gov (United States)

    Wang, Shiyi; Zhan, Qiwen

    2016-07-01

    We propose a reflection type metal-insulator-metal (MIM) metasurface composed of hybrid nano-antennas for comprehensive spatial engineering of the properties of optical fields. The capability of such structure is illustrated in the design of a device that can be used to produce a radially polarized vectorial beam for optical needle field generation. This device consists of uniformly segmented sectors of high efficiency MIM metasurface. With each of the segment sector functioning as a local quarter-wave-plate (QWP), the device is designed to convert circularly polarized incidence into local linear polarization to create an overall radial polarization with corresponding binary phases and extremely high dynamic range amplitude modulation. The capability of such devices enables the generation of nearly arbitrarily complex optical fields that may find broad applications that transcend disciplinary boundaries.

  20. High-field electron transport in GaN under crossed electric and magnetic fields

    Science.gov (United States)

    Kochelap, V. A.; Korotyeyev, V. V.; Syngayivska, G. I.; Varani, L.

    2015-10-01

    High-field electron transport studied in crossed electric and magnetic fields in bulk GaN with doping of 1016 cm-3, compensation around 90% at the low lattice temperature (30 K). It was found the range of the magnetic and electric fields where the non-equilibrium electron distribution function has a complicated topological structure in the momentum space with a tendency to the formation of the inversion population. Field dependences of dissipative and Hall components of the drift velocity were calculated for the samples with short- and open- circuited Hall contacts in wide ranges of applied electric (0 — 20 kV/cm) and magnetic (1 — 10 T) fields. For former sample, field dependences of dissipative and Hall components of the drift velocity have a non-monotonic behavior. The dissipative component has the inflection point which corresponds to the maximum point of the Hall component. For latter sample, the drift velocity demonstrate a usual sub-linear growth without any critical points. We found that GaN samples with controlled resistance of the Hall circuit can be utilized as a electronic high-power switch.

  1. The Competitiveness of Highly Accomplished Individuals in Four Talent Fields.

    Science.gov (United States)

    Monsaas, Judith A.

    The study examined competitiveness among eight very high achievers in four talent fields: research mathematics, concert piano, swimming, and tennis. Retrospective interviews had previously been conducted with the subjects as part of B. Bloom's "Development of Talent Project." A 14-statement instrument was developed and applied to interview…

  2. High Redshift Galaxies in the Hubble Ultra Deep Field

    CERN Document Server

    Hathi, Nimish P

    2008-01-01

    My dissertation presents results from three recent investigations in the Hubble Ultra Deep Field (HUDF) focusing on understanding structural and physical properties of high redshift galaxies. Here I summarize results from these studies. This thesis work was conducted at Arizona State University under the guidance of Prof. Rogier Windhorst and Prof. Sangeeta Malhotra.

  3. Survey of high field superconducting material for accelerator magnets

    Energy Technology Data Exchange (ETDEWEB)

    Scahlan, R.; Greene, A.F.; Suenaga, M.

    1986-05-01

    The high field superconductors which could be used in accelerator dipole magnets are surveyed, ranking these candidates with respect to ease of fabrication and cost as well as superconducting properties. Emphasis is on Nb/sub 3/Sn and NbTi. 27 refs., 2 figs. (LEW)

  4. High intensity electromagnetic field gerenation using a transportable reverberation chamber

    NARCIS (Netherlands)

    Leferink, Frank

    2008-01-01

    A reverberation chamber can create very high field strength with moderate input power. Existing chambers are making use of a paddle wheel to change the resonant modes in the chamber. A transportable reverberation chamber with vibrating walls will be presented. Inside this Vibrating Intrinsic Reverbe

  5. Free-field calibration of measurement microphones at high frequencies

    DEFF Research Database (Denmark)

    Barrera Figueroa, Salvador; Rasmussen, Knud; Torras Rosell, Antoni;

    2011-01-01

    Measurement microphones are typically calibrated in a free field at frequencies up to 50 kHz. This is a sufficiently high frequency for the most of sound measurement applications related with noise assessment. However, other applications such as assessment of the noise emitted by ultrasound clean...

  6. FIELD EVALUATION OF A HIGH-VOLUME DICHOTOMOUS SAMPLER

    Science.gov (United States)

    This study presents the field evaluation of a high-volume dichotomous sampler that collects coarse (PM10-2.5) and fine (PM2.5) particulate matter. The key feature of this device is the utilization of a round-nozzle virtual impactor with a 50% cutpoint at 2.5 5m to split PM10 into...

  7. High-Energy Scattering in Non-Commutative Field Theory

    CERN Document Server

    Kumar, J; Kumar, Jason; Rajaraman, Arvind

    2005-01-01

    We analyze high energy scattering for non-commutative field theories using the dual gravity description. We find that the Froissart-Martin bound still holds, but that cross-sections stretch in the non-commutative directions in a way dependent on the infrared cutoff. This puzzling behavior suggests new aspects of UV/IR mixing.

  8. High magnetic field studies of BEDT-TTF organic conductors

    Energy Technology Data Exchange (ETDEWEB)

    Honold, M.M

    1999-07-01

    This Thesis gives a detailed account of the high magnetic field properties of {alpha}-phase BEDT-TTF charge-transfer salts, with particular focus on the salts {alpha}-(BEDT-TTF){sub 2}KHg(SCN){sub 4} and {alpha}-(BEDT-TTF){sub 2}TlHg(SCN){sub 4}. The existence of the bulk quantum Hall effect and its eventual destruction in the high-field limit is shown by a variety of experimental means, including magnetoresistance, magnetisation and Hall potential oscillation studies; the latter are based on a new technique specifically developed for this purpose. Chapter 1 introduces the concept of organic conductors and emphasises their potential as prototype systems of reduced dimensionality; in Chapter 2, the necessary physics and experimental techniques for their investigation are outlined. Following model calculations which suggested the possibility of the quantum Hall effect in {alpha}-phase BEDT-TTF salts, measurements of the Hall resistivity were carried out on {alpha}-(BEDT-TTF){sub 2}TlHg(SCN){sub 4} (described in Chapter 3). These exhibit a series of plateaux and represent the direct observation of the quantum Hall effect in a bulk material. Chapter 4 reports the discovery of an anomalous magnetotransport mode in the interplane resistance of {alpha}-(BEDT-TTF){sub 2}KHg(SCN){sub 4} which involves the suppression and phase inversion of the Shubnikov-de Haas oscillations at low temperatures. This is interpreted as the action of a two-dimensional chiral Fermi liquid formed from the current-carrying edge states of each quantum Hall layer. Chapter 5 reports the first observation of magnetic breakdown in the high-field phase of {alpha}-(BEDT-TTF){sub 2}KHg(SCN){sub 4}, allowing an improved description of the high-field Fermi surface topology. These results are used to develop a new model for the nested low-field Fermi surface which can explain experimental evidence previously unaccounted for. Studies of the limiting behaviour of Hall potential oscillations in Chapter 6 show

  9. Development of Radiation Fusion Technology with Food Technology by the Application of High Dose Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ju Won; Kim, Jae Hun; Choi, Jong Il

    2010-04-15

    This study was studied to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering were developed. Irradiation condition to destroy radiation resistant food borne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources were developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not were developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin were developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam were introduced. Results from this research project, the followings are expected. (1) Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. (2) Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of food borne outbreaks. (3) Build of SPS/TBT system against imported products and acceleration of domestic product export

  10. Development of radiation fusion technology with food technology by the application of high dose irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Juwoon; Kim, Jaehun; Choi, Jongil; and others

    2012-04-15

    This study was performed to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering was developed. Irradiation condition to destroy radiation resistant foodborne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources was developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not was developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin was developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam was introduced. Results from this research project, the followings are expected. Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of foodborne outbreaks. Build of SPS/TBT system against imported products and acceleration of domestic product export. Systemized

  11. Characterization of high temperature superconductor cables for magnet toroidal field coils of the DEMO fusion power plant

    Energy Technology Data Exchange (ETDEWEB)

    Bayer, Christoph M.

    2017-05-01

    Nuclear fusion is a key technology to satisfy the basic demand for electric energy sustainably. The official EUROfusion schedule foresees a first industrial DEMOnstration Fusion Power Plant for 2050. In this work several high temperature superconductor sub-size cables are investigated for their applicability in large scale DEMO toroidal field coils. Main focus lies on the electromechanical stability under the influence of high Lorentz forces at peak magnetic fields of up to 12 T.

  12. High Technology Centrifugal Compressor for Commercial Air Conditioning Systems

    Energy Technology Data Exchange (ETDEWEB)

    Ruckes, John

    2006-04-15

    R&D Dynamics, Bloomfield, CT in partnership with the State of Connecticut has been developing a high technology, oil-free, energy-efficient centrifugal compressor called CENVA for commercial air conditioning systems under a program funded by the US Department of Energy. The CENVA compressor applies the foil bearing technology used in all modern aircraft, civil and military, air conditioning systems. The CENVA compressor will enhance the efficiency of water and air cooled chillers, packaged roof top units, and other air conditioning systems by providing an 18% reduction in energy consumption in the unit capacity range of 25 to 350 tons of refrigeration The technical approach for CENVA involved the design and development of a high-speed, oil-free foil gas bearing-supported two-stage centrifugal compressor, CENVA encompassed the following high technologies, which are not currently utilized in commercial air conditioning systems: Foil gas bearings operating in HFC-134a; Efficient centrifugal impellers and diffusers; High speed motors and drives; and System integration of above technologies. Extensive design, development and testing efforts were carried out. Significant accomplishments achieved under this program are: (1) A total of 26 builds and over 200 tests were successfully completed with successively improved designs; (2) Use of foil gas bearings in refrigerant R134a was successfully proven; (3) A high speed, high power permanent magnet motor was developed; (4) An encoder was used for signal feedback between motor and controller. Due to temperature limitations of the encoder, the compressor could not operate at higher speed and in turn at higher pressure. In order to alleviate this problem a unique sensorless controller was developed; (5) This controller has successfully been tested as stand alone; however, it has not yet been integrated and tested as a system; (6) The compressor successfully operated at water cooled condensing temperatures Due to temperature

  13. High school students' representations and understandings of electric fields

    Science.gov (United States)

    Cao, Ying; Brizuela, Bárbara M.

    2016-12-01

    This study investigates the representations and understandings of electric fields expressed by Chinese high school students 15 to 16 years old who have not received high school level physics instruction. The physics education research literature has reported students' conceptions of electric fields postinstruction as indicated by students' performance on textbook-style questions. It has, however, inadequately captured student ideas expressed in other situations yet informative to educational research. In this study, we explore students' ideas of electric fields preinstruction as shown by students' representations produced in open-ended activities. 92 participant students completed a worksheet that involved drawing comic strips about electric charges as characters of a cartoon series. Three students who had spontaneously produced arrow diagrams were interviewed individually after class. We identified nine ideas related to electric fields that these three students spontaneously leveraged in the comic strip activity. In this paper, we describe in detail each idea and its situated context. As most research in the literature has understood students as having relatively fixed conceptions and mostly identified divergences in those conceptions from canonical targets, this study shows students' reasoning to be more variable in particular moments, and that variability includes common sense resources that can be productive for learning about electric fields.

  14. Highly flexible and robust N-doped SiC nanoneedle field emitters

    KAUST Repository

    Chen, Shanliang

    2015-01-23

    Flexible field emission (FE) emitters, whose unique advantages are lightweight and conformable, promise to enable a wide range of technologies, such as roll-up flexible FE displays, e-papers and flexible light-emitting diodes. In this work, we demonstrate for the first time highly flexible SiC field emitters with low turn-on fields and excellent emission stabilities. n-Type SiC nanoneedles with ultra-sharp tips and tailored N-doping levels were synthesized via a catalyst-assisted pyrolysis process on carbon fabrics by controlling the gas mixture and cooling rate. The turn-on field, threshold field and current emission fluctuation of SiC nanoneedle emitters with an N-doping level of 7.58 at.% are 1.11 V μm-1, 1.55 V μm-1 and 8.1%, respectively, suggesting the best overall performance for such flexible field emitters. Furthermore, characterization of the FE properties under repeated bending cycles and different bending states reveal that the SiC field emitters are mechanically and electrically robust with unprecedentedly high flexibility and stabilities. These findings underscore the importance of concurrent morphology and composition controls in nanomaterial synthesis and establish SiC nanoneedles as the most promising candidate for flexible FE applications. © 2015 Nature Publishing Group All rights reserved.

  15. Iridate compound produces extraordinarily high coercive magnetic field

    Science.gov (United States)

    Zapf, Vivien; Topping, Craig; Kim, Jae-Wook; Mun, Eun-Deok; Goddard, Paul; Ghannadzadeh, Saman; Luo, Xuan; Cheong, Sang-Wook; Singleton, John

    2014-03-01

    We present a data on an iridate compound that shows an extraordinarily large magnetic hysteresis loop. The coercive magnetic field exceeds 40 Tesla in single-crystal samples. The hysteresis coexists with a linear background, and the total remanent magnetization is about half a Bohr magneton. We will discuss the emergence of these properties from the interplay of spin-orbit coupling, magnetic exchange and possible frustration. The single crystalline material exhibits a magnetic hysteresis loop for one orientation of the magnetic field and a smooth linear increase in the magnetization with field for the other. Measurements were conducted in 65 T short-pulse magnets and the 60 Tesla shaped-pulse magnet at the National High Magnetic Field Lab in Los Alamos. We do not observe any dependence of the magnetic hysteresis on magnetic field sweep rate. Compounds containing Ir4 + have attracted attention recently due to strong spin-orbit coupling that competes with crystal-electric field and exchange interactions. This competition can result in non-Hund's-rule ground states with unusual properties.

  16. Review - X-ray diffraction measurements in high magnetic fields and at high temperatures

    Directory of Open Access Journals (Sweden)

    Yoshifuru Mitsui, Keiichi Koyama and Kazuo Watanabe

    2009-01-01

    Full Text Available A system was developed measuring x-ray powder diffraction in high magnetic fields up to 5 T and at temperatures from 283 to 473 K. The stability of the temperature is within 1 K over 6 h. In order to examine the ability of the system, the high-field x-ray diffraction measurements were carried out for Si and a Ni-based ferromagnetic shape-memory alloy. The results show that the x-ray powder diffraction measurements in high magnetic fields and at high temperatures are useful for materials research.

  17. Revisit of Energy Use and Technologies of High Performance Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Li, Cheng; Hong, Tianzhen

    2014-03-30

    Energy consumed by buildings accounts for one third of the world?s total primary energy use. Associated with the conscious of energy savings in buildings, High Performance Buildings (HPBs) has surged across the world, with wide promotion and adoption of various performance rating and certification systems. It is valuable to look into the actual energy performance of HPBs and to understand their influencing factors. To shed some light on this topic, this paper conducted a series of portfolio analysis based on a database of 51 high performance office buildings across the world. Analyses showed that the actual site Energy Use Intensity (EUI) of the 51 buildings varied by a factor of up to 11, indicating a large scale of variation of the actual energy performance of the current HPBs. Further analysis of the correlation between EUI and climate elucidated ubiquitous phenomenon of EUI scatter throughout all climate zones, implying that the weather is not a decisive factor, although important, for the actual energy consumption of an individual building. On the building size via EUI, analysis disclosed that smaller buildings have a tendency to achieving lower energy use. Even so, the correlation is not absolute since some large buildings demonstrated low energy use while some small buildings performed opposite. Concerning the technologies, statistics indicated that the application of some technologies had correlations with some specific building size and climate characteristic. However, it was still hard to pinpoint a set of technologies which was directly correlative with a group of low EUI buildings. It is concluded that no a single factor essentially determines the actual energy performance of HPBs. To deliver energy-efficient buildings, an integrated design taking account of climate, technology, occupant behavior as well as operation and maintenance should be implemented.

  18. High-field phase-diagram of Fe arsenide superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Jo, Y.J.; Jaroszynski, J.; Yamamoto, A.; Gurevich, A.; Riggs, S.C.; Boebinger, G.S.; Larbalestier, D. [National High Magnetic Field Laboratory, Florida State University, Tallahassee-FL 32310 (United States); Wen, H.H. [Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Zhigadlo, N.D.; Katrych, S.; Bukowski, Z.; Karpinski, J. [Laboratory for Solid State Physics, ETH Zuerich, CH-8093 Zuerich (Switzerland); Liu, R.H.; Chen, H.; Chen, X.H. [Hefei National Laboratory for Physical Science a Microscale and Department of Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Balicas, L., E-mail: balicas@magnet.fsu.ed [National High Magnetic Field Laboratory, Florida State University, Tallahassee-FL 32310 (United States)

    2009-05-01

    Here, we report an overview of the phase-diagram of single-layered and double-layered Fe arsenide superconductors at high magnetic fields. Our systematic magneto-transport measurements of polycrystalline SmFeAsO{sub 1-x}F{sub x} at different doping levels confirm the upward curvature of the upper critical magnetic field H{sub c2}(T) as a function of temperature T defining the phase boundary between the superconducting and metallic states for crystallites with the ab planes oriented nearly perpendicular to the magnetic field. We further show from measurements on single-crystals that this feature, which was interpreted in terms of the existence of two superconducting gaps, is ubiquitous among both series of single- and double-layered compounds. In all compounds explored by us the zero temperature upper critical field H{sub c2}(0), estimated either through the Ginzburg-Landau or the Werthamer-Helfand-Hohenberg single gap theories, strongly surpasses the weak-coupling Pauli paramagnetic limiting field. This clearly indicates the strong-coupling nature of the superconducting state and the importance of magnetic correlations for these materials. Our measurements indicate that the superconducting anisotropy, as estimated through the ratio of the effective masses gamma = (m{sub c}/m{sub ab}){sup 1/2} for carriers moving along the c-axis and the ab-planes, respectively, is relatively modest as compared to the high-T{sub c} cuprates, but it is temperature, field and even doping dependent. Finally, our preliminary estimations of the irreversibility field H{sub m}(T), separating the vortex-solid from the vortex-liquid phase in the single-layered compounds, indicates that it is well described by the melting of a vortex lattice in a moderately anisotropic uniaxial superconductor.

  19. Magnetic resonance imaging and spectroscopy at ultra high fields

    Energy Technology Data Exchange (ETDEWEB)

    Neuberger, Thomas

    2009-06-23

    The goal of the work presented in this thesis was to explore the possibilities and limitations of MRI / MRS using an ultra high field of 17.6 tesla. A broad range of specific applications and MR methods, from MRI to MRSI and MRS were investigated. The main foci were on sodium magnetic resonance spectroscopic imaging of rodents, magnetic resonance spectroscopy of the mouse brain, and the detection of small amounts of iron labeled stem cells in the rat brain using MRI Sodium spectroscopic imaging was explored since it benefits tremendously from the high magnetic field. Due to the intrinsically low signal in vivo, originating from the low concentrations and short transverse relaxation times, only limited results have been achieved by other researchers until now. Results in the literature include studies conducted on large animals such as dogs to animals as small as rats. No studies performed on mice have been reported, despite the fact that the mouse is the most important laboratory animal due to the ready availability of transgenic strains. Hence, this study concentrated on sodium MRSI of small rodents, mostly mice (brain, heart, and kidney), and in the case of the brain on young rats. The second part of this work concentrated on proton magnetic resonance spectroscopy of the rodent brain. Due to the high magnetic field strength not only the increasing signal but also the extended spectral resolution was advantageous for such kind of studies. The difficulties/limitations of ultra high field MRS were also investigated. In the last part of the presented work detection limits of iron labeled stem cells in vivo using magnetic resonance imaging were explored. The studies provided very useful benchmarks for future researchers in terms of the number of labeled stem cells that are required for high-field MRI studies. Overall this work has shown many of the benefits and the areas that need special attention of ultra high fields in MR. Three topics in MRI, MRS and MRSI were

  20. Inverse field-based approach for simultaneous B₁ mapping at high fields - a phantom based study.

    Science.gov (United States)

    Jin, Jin; Liu, Feng; Zuo, Zhentao; Xue, Rong; Li, Mingyan; Li, Yu; Weber, Ewald; Crozier, Stuart

    2012-04-01

    Based on computational electromagnetics and multi-level optimization, an inverse approach of attaining accurate mapping of both transmit and receive sensitivity of radiofrequency coils is presented. This paper extends our previous study of inverse methods of receptivity mapping at low fields, to allow accurate mapping of RF magnetic fields (B(1)) for high-field applications. Accurate receive sensitivity mapping is essential to image domain parallel imaging methods, such as sensitivity encoding (SENSE), to reconstruct high quality images. Accurate transmit sensitivity mapping will facilitate RF-shimming and parallel transmission techniques that directly address the RF inhomogeneity issue, arguably the most challenging issue of high-field magnetic resonance imaging (MRI). The inverse field-based approach proposed herein is based on computational electromagnetics and iterative optimization. It fits an experimental image to the numerically calculated signal intensity by iteratively optimizing the coil-subject geometry to better resemble the experiments. Accurate transmit and receive sensitivities are derived as intermediate results of the optimization process. The method is validated by imaging studies using homogeneous saline phantom at 7T. A simulation study at 300MHz demonstrates that the proposed method is able to obtain receptivity mapping with errors an order of magnitude less than that of the conventional method. The more accurate receptivity mapping and simultaneously obtained transmit sensitivity mapping could enable artefact-reduced and intensity-corrected image reconstructions. It is hoped that by providing an approach to the accurate mapping of both transmit and receive sensitivity, the proposed method will facilitate a range of applications in high-field MRI and parallel imaging. Copyright © 2012 Elsevier Inc. All rights reserved.

  1. Guidance for Deployment of Mobile Technologies for Nuclear Power Plant Field Workers

    Energy Technology Data Exchange (ETDEWEB)

    Heather D. Medema; Ronald K. Farris

    2012-09-01

    This report is a guidance document prepared for the benefit of commercial nuclear power plants’ (NPPs) supporting organizations and personnel who are considering or undertaking deployment of mobile technology for the purpose of improving human performance and plant status control (PSC) for field workers in an NPP setting. This document especially is directed at NPP business managers, Electric Power Research Institute, Institute of Nuclear Power Operations, and other non-Information Technology personnel. This information is not intended to replace basic project management practices or reiterate these processes, but is to support decision-making, planning, and preparation of a business case.

  2. Application verification research of cloud computing technology in the field of real time aerospace experiment

    Science.gov (United States)

    Wan, Junwei; Chen, Hongyan; Zhao, Jing

    2017-08-01

    According to the requirements of real-time, reliability and safety for aerospace experiment, the single center cloud computing technology application verification platform is constructed. At the IAAS level, the feasibility of the cloud computing technology be applied to the field of aerospace experiment is tested and verified. Based on the analysis of the test results, a preliminary conclusion is obtained: Cloud computing platform can be applied to the aerospace experiment computing intensive business. For I/O intensive business, it is recommended to use the traditional physical machine.

  3. Wide-field, high-resolution Fourier ptychographic microscopy

    CERN Document Server

    Zheng, Guoan; Yang, Changhuei

    2014-01-01

    In this article, we report an imaging method, termed Fourier ptychographic microscopy (FPM), which iteratively stitches together a number of variably illuminated, low-resolution intensity images in Fourier space to produce a wide-field, high-resolution complex sample image. By adopting a wavefront correction strategy, the FPM method can also correct for aberrations and digitally extend a microscope's depth-of-focus beyond the physical limitations of its optics. As a demonstration, we built a microscope prototype with a resolution of 0.78 um, a field-of-view of ~120 mm2, and a resolution-invariant depth-of-focus of 0.3 mm (characterized at 632 nm). Gigapixel colour images of histology slides verify FPM's successful operation. The reported imaging procedure transforms the general challenge of high-throughput, high-resolution microscopy from one that is coupled to the physical limitations of the system's optics to one that is solvable through computation.

  4. High field superconductor development and understanding project, Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Larbalestier, David C.; Lee, Peter J.

    2009-07-15

    Over 25 years the Applied Superconductivity Center at the University of Wisconsin-Madison provided a vital technical resource to the High Energy Physics community covering development in superconducting strand for HEP accelerator magnet development. In particular the work of the group has been to develop the next generation of high field superconductors for high field application. Grad students Mike Naus, Chad Fischer, Arno Godeke and Matt Jewell improved our understanding of the microstructure and microchemistry of Nb3Sn and their impact on the physical and mechanical properties. The success of this work has led to the continued funding of this work at the ASC after it moved to the NHMFL and also to direct funding from BNL for some aspects of Nb3Sn cable evaluation.

  5. High field – low energy muon ionization cooling channel

    Directory of Open Access Journals (Sweden)

    Hisham Kamal Sayed

    2015-09-01

    Full Text Available Muon beams are generated with large transverse and longitudinal emittances. In order to achieve the low emittances required by a muon collider, within the short lifetime of the muons, ionization cooling is required. Cooling schemes have been developed to reduce the muon beam 6D emittances to ≈300  μm-rad in transverse and ≈1–1.5  mm in longitudinal dimensions. The transverse emittance has to be further reduced to ≈50–25  μm-rad with an upper limit on the longitudinal emittance of ≈76  mm in order to meet the high-energy muon collider luminosity requirements. Earlier studies of the transverse cooling of low energy muon beams in high field magnets showed a promising performance, but did not include transverse or longitudinal matching between the stages. In this study we present the first complete design of the high field-low energy ionization cooling channel with transverse and longitudinal matching. The channel design was based on strong focusing solenoids with fields of 25–30 T and low momentum muon beam starting at 135  MeV/c and gradually decreasing. The cooling channel design presented here is the first to reach ≈50 micron scale emittance beam. We present the channel’s optimized design parameters including the focusing solenoid fields, absorber parameters and the transverse and longitudinal matching.

  6. GeoPad and GeoPocket: Information Technology for Field Science Education

    Science.gov (United States)

    Knoop, P. A.; van der Pluijm, B.

    2006-12-01

    Over the past four years we have successfully incorporated and evaluated the use of field-based Information Technology (IT) in introductory through senior-level field courses offered at the University of Michigan's Camp Davis Geology Field Station, near Jackson, WY. The use of GeoPads (field-durable Tablet PCs) and GeoPockets (field-durable Pocket PCs) -- both equipped with GIS, GPS, wireless networking, electronic notebook and other pertinent software -- have significantly enhanced our field exercises and excursions, for both students and instructors. We have focused on three main applications: (1) Mapping facilitating the development of spatial reasoning skills via powerful, intuitive capabilities for in-the-field data entry, visualization, analysis, and interpretation in both 2-D and 3-D representations; (2) Field-Trips enriching the overall experience by providing in-the-field access to a broad, relevant collection of supplemental materials, such as papers, figures, maps, photos, thin section images, etc.; and, (3) Field-Based Exercises enhancing the learning opportunities afforded by field-based exercises by supporting data analysis and interpretation, while still in the context in which the data was gathered. This IT-based approach to field education utilizes standard, off-the-shelf hardware and software, and provides students with experience using tools that are increasingly relevant to their future academic or professional careers. Furthermore, this approach is generally applicable to education and research in many traditionally non-IT-savvy science domains, in addition to geology, such as archeology, biology, sociology, and natural resources.

  7. Limiting technologies for particle beams and high energy physics

    Energy Technology Data Exchange (ETDEWEB)

    Panofsky, W.K.H.

    1985-07-01

    Since 1930 the energy of accelerators had grown by an order of magnitude roughly every 7 years. Like all exponential growths, be they human population, the size of computers, or anything else, this eventually will have to come to an end. When will this happen to the growth of the energy of particle accelerators and colliders. Fortunately, as the energy of accelerators has grown the cost per unit energy has decreased almost as fast as has the increase in energy. The result is that while the energy has increased so dramatically the cost per new installation has increased only by roughly an order of magnitude since the 1930's (corrected for inflation), while the number of accelerators operating at the frontier of the field has shrunk. As is shown in the by now familiar Livingston chart this dramatic decrease in cost has been achieved largely by a succession of new technologies, in addition to the more moderate gains in efficiency due to improved design, economies of scale, etc. We are therefore facing two questions: (1) Is there good reason scientifically to maintain the exponential growth, and (2) Are there new technologies in sight which promise continued decreases in unit costs. The answer to the first question is definitely yes; the answer to the second question is maybe.

  8. LIQUIDARMOR CM Flashing and Sealant, High Impact Technology Demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Hun, Diana E [ORNL; Bhandari, Mahabir S [ORNL

    2016-12-01

    Air leakage is responsible for about 1.1 quads of energy or 6% of the total energy used by commercial buildings in the US. Consequently, infiltration and exfiltration are among the largest envelope-related contributors to the heating, ventilation, and air conditioning loads in commercial buildings. New air sealing technologies have recently emerged that aim to improve the performance of air barrier systems by simplifying their installation procedure. LIQUIDARMORTM CM Flashing and Sealant is an example of these new advanced material technologies. This technology is a spray-applied sealant and liquid flashing and can span gaps that are up to ¼ in. wide without a supporting material. ORNL verified the performance of LIQUIDARMORTM CM with field tests and energy simulations from a building in which LIQUIDARMORTM CM was one of components of the air barrier system. The Homeland Security Training Center (HTC) at the College of DuPage in Glen Ellyn, IL, served as the demonstration site. Blower door test results show the average air leakage rate in the demonstration site to be 0.15 cfm/ft2 at 1.57 psf, or 63% lower than the 0.4 cfm at 1.57 psf specified in the 2015 International Energy Conservation Code (IECC). According to simulation results, HTC lowered its annual heating and cooling cost by about $3,000 or 9% compared to a similar building that lacked an air barrier system. This demonstration project serves as an example of the level of building envelope airtightness that can be achieved by using air barrier materials that are properly installed, and illustrates the energy and financial savings that such an airtight envelope could attain.

  9. High-Purity Aluminum Magnet Technology for Advanced Space Transportation Systems

    Science.gov (United States)

    Goodrich, R. G.; Pullam, B.; Rickle, D.; Litchford, R. J.; Robertson, G. A.; Schmidt, D. D.; Cole, John (Technical Monitor)

    2001-01-01

    Basic research on advanced plasma-based propulsion systems is routinely focused on plasmadynamics, performance, and efficiency aspects while relegating the development of critical enabling technologies, such as flight-weight magnets, to follow-on development work. Unfortunately, the low technology readiness levels (TRLs) associated with critical enabling technologies tend to be perceived as an indicator of high technical risk, and this, in turn, hampers the acceptance of advanced system architectures for flight development. Consequently, there is growing recognition that applied research on the critical enabling technologies needs to be conducted hand in hand with basic research activities. The development of flight-weight magnet technology, for example, is one area of applied research having broad crosscutting applications to a number of advanced propulsion system architectures. Therefore, NASA Marshall Space Flight Center, Louisiana State University (LSU), and the National High Magnetic Field Laboratory (NHMFL) have initiated an applied research project aimed at advancing the TRL of flight-weight magnets. This Technical Publication reports on the group's initial effort to demonstrate the feasibility of cryogenic high-purity aluminum magnet technology and describes the design, construction, and testing of a 6-in-diameter by 12-in-long aluminum solenoid magnet. The coil was constructed in the machine shop of the Department of Physics and Astronomy at LSU and testing was conducted in NHMFL facilities at Florida State University and at Los Alamos National Laboratory. The solenoid magnet was first wound, reinforced, potted in high thermal conductivity epoxy, and bench tested in the LSU laboratories. A cryogenic container for operation at 77 K was also constructed and mated to the solenoid. The coil was then taken to NHMFL facilities in Tallahassee, FL. where its magnetoresistance was measured in a 77 K environment under steady magnetic fields as high as 10 T. In

  10. Hybrid Cooling Loop Technology for Robust High Heat Flux Cooling Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Cooling Technologies, Inc. proposes to develop a hybrid cooling loop technology for space thermal control. The proposed technology combines the high heat...

  11. Technology for Tomorrow---High-Tech Exhibition Held in HONG KONG

    Institute of Scientific and Technical Information of China (English)

    Fang Lin

    1997-01-01

    @@ "Technology for Tomorrow"--- High-Tech Exhibition has been held by Hong Kong Science & Technology Sector for Celebration of Return of Sovereignty Association and China Association Science & Technology on June 28 to July 4, 1997 in Hong Kong.

  12. Rf Gun with High-Current Density Field Emission Cathode

    Energy Technology Data Exchange (ETDEWEB)

    Jay L. Hirshfield

    2005-12-19

    High current-density field emission from an array of carbon nanotubes, with field-emission-transistor control, and with secondary electron channel multiplication in a ceramic facing structure, have been combined in a cold cathode for rf guns and diode guns. Electrodynamic and space-charge flow simulations were conducted to specify the cathode configuration and range of emission current density from the field emission cold cathode. Design of this cathode has been made for installation and testing in an existing S-band 2-1/2 cell rf gun. With emission control and modulation, and with current density in the range of 0.1-1 kA/cm2, this cathode could provide performance and long-life not enjoyed by other currently-available cathodes

  13. Penetration dynamics of a magnetic field pulse into high-? superconductors

    Science.gov (United States)

    Meerovich, V.; Sinder, M.; Sokolovsky, V.; Goren, S.; Jung, G.; Shter, G. E.; Grader, G. S.

    1996-12-01

    The penetration of a magnetic field pulse into a high-0953-2048/9/12/004/img9 superconducting plate is investigated experimentally and theoretically. It follows from our experiments that the threshold of penetration increases with increasing amplitude and/or decreasing duration of the applied pulse. The penetrating field continues to grow as the applied magnetic field decreases. The peculiarities observed are explained in the framework of the extended critical state model. It appears that the deviations from Bean's classical critical state model are characterized by a parameter equal to the square of the ratio of plate thickness to skin depth. The applicability of the classical critical state model is restricted by the condition that this parameter is much less than 1. This condition is also the criterion for the applicability of pulse methods of critical current measurements.

  14. High-order harmonic generation from inhomogeneous fields

    CERN Document Server

    Ciappina, M F; Quidant, R; Lewenstein, M

    2011-01-01

    We present theoretical studies of high-order harmonic generation (HHG) produced by non-homogeneous fields as resulting from the illumination of plasmonic nanostructures with a short laser pulse. We show that the inhomogeneity of the local fields plays an important role in the HHG process and lead to the generation of even harmonics and a significantly increased cutoff, more pronounced for the longer wavelengths cases studied. In order to understand and characterize the new HHG features we employ two different approaches: the numerical solution of the time dependent Schr\\"odinger equation (TDSE) and the semiclassical approach known as Strong Field Approximation (SFA). Both approaches predict comparable results and show the new features, but using the semiclassical arguments behind the SFA, we are able to fully understand the reasons of the cutoff extension.

  15. Control and data acquisition systems for high field superconducting wigglers

    CERN Document Server

    Batrakov, A; Karpov, G; Kozak, V; Kuzin, M; Kuper, E; Mamkin, V; Mezentsev, N A; Repkov, V V; Selivanov, A; Shkaruba, V A

    2001-01-01

    This paper describes the control and DAQ system of superconducting wigglers with magnetic field range up to 10.3 T. The first version of the system controls a 7 T superconducting wiggler prepared for installation at Bessy-II (Germany). The second one controls a 10 T wiggler which is under testing now at the SPring-8 site (Japan). Both systems are based on VME apparatus. The set of specialized VME modules is elaborated to arrange wiggler power supply control, full time wiggler monitoring, and magnetic field high accuracy measurement and field stabilization. The software for the control of the wigglers is written in C language for VxWorks operation system for a Motorola-162 VME controller. The task initialization, stops and acquisition of the data can be done from the nearest personal computer (FTP host for VME), or from the remote system as well.

  16. The Perception of EFL High School Students in Using of Computer Technology in the Process of Learning: Merits and Demerits

    Directory of Open Access Journals (Sweden)

    Siros Izadpanah

    2016-06-01

    Full Text Available Recent developments in the field of computer technology have led to a renewed interest in the process of learning.  In order to investigate EFL learners’ perception of technology use, a mixed method design was used to explore students’ attitude. Quantitative data was collected through questionnaires and qualitative data using open-ended questions.The questionnaire was distributed in two different high schools (one male and one female in Zanjan, 2015. Participants were 340 high school students who filled in CALLAI questionnaire. The data of the questionnaire was analysed using Statistical Packages for Social Sciences (SPSS Version 20. Descriptive statistics including frequencies and percentages were used to analyze questionnaire items. Data gathered from open-ended questions was analysed using qualitative data analysis software NVivo 8.0. It was found that students had positive attitude toward facilitation of English learning in the classroom through computer technology. Our objective was to explore students’ perceptions of technology usage in high schools .The implication of this study was that students, with prior experience in technology, might benefit more from technology use in education. Furthermore, it could be guidance for teachers to better understand world of technology and recognize possible barriers to integration of technology. Keywords: Advantages of Computer Technology, Computer and EFL Teaching, EFL High School Students, English learning, Perceptions of EFL learners

  17. Internationalization of high-technology ventures from emerging economies

    DEFF Research Database (Denmark)

    Turcan, Romeo V.

    This paper aims to contribute towards filling in the gap in the international entrepreneurhsip literature by exploring how and why new high-technology ventures internationalize from an emerging economy, namely Moldova. To address the above research questions, a multiple-case study strategy...... was adopted for the purpose of theory building, relying on purposeful sampling the logic and power of which lie in selecting information-rich cases for study in depth. Six international new ventures were identified through the Moldovan Association of Private ICT Companies. Data were collected using two...

  18. High-performance silicon photonics technology for telecommunications applications.

    Science.gov (United States)

    Yamada, Koji; Tsuchizawa, Tai; Nishi, Hidetaka; Kou, Rai; Hiraki, Tatsurou; Takeda, Kotaro; Fukuda, Hiroshi; Ishikawa, Yasuhiko; Wada, Kazumi; Yamamoto, Tsuyoshi

    2014-04-01

    By way of a brief review of Si photonics technology, we show that significant improvements in device performance are necessary for practical telecommunications applications. In order to improve device performance in Si photonics, we have developed a Si-Ge-silica monolithic integration platform, on which compact Si-Ge-based modulators/detectors and silica-based high-performance wavelength filters are monolithically integrated. The platform features low-temperature silica film deposition, which cannot damage Si-Ge-based active devices. Using this platform, we have developed various integrated photonic devices for broadband telecommunications applications.

  19. Design of wide field and high resolution video lens

    Science.gov (United States)

    Xiao, Ze-xin; Zhan, Binzhou; Han, Haimei

    2009-11-01

    Online detecting is increasingly used in industrial process for the requirement of product quality improving. It is a trend that the "machine detecting" with "machine version + computer intelligence" as new method replaces traditional manual "eye observation". The essential of "machine detecting" is that image of object being collected with high resolution video lens on sensor panel of photoelectric (CCD ,CMOS) and detecting result being automatically gained by computer after the image saved and processed. "Machine detecting" is developing rapidly with the universal reception by enterprises because of its fine accurateness, high efficiency and the real time. Video lens is one of the important components of machine version system. Requirements of wide field and high resolution enlarged the complexity of video lens design. In this paper a design case used in visible light with field diameter Φ32mm, β=-0.25× and NA'=0.15. We give design parameters of the video lens which obtained with theoretically calculating and Oslo software optimization: MTF>0.3 in full field and 215lp/mm, distortion <0.05%.This lens has an excellent optic performance to match with 1.3 million pixels 1/2"CCD, and a high performance price ratio for being consist of only 7 single lens in the way of 5 units.

  20. Field-based Information Technology in Geology Education: GeoPads

    Science.gov (United States)

    Knoop, P. A.; van der Pluijm, B.

    2004-12-01

    During the past two summers, we have successfully incorporated a field-based information technology component into our senior-level, field geology course (GS-440) at the University of Michigan's Camp Davis Geology Field Station, near Jackson, WY. Using GeoPads -- rugged TabletPCs equipped with electronic notebook software, GIS, GPS, and wireless networking -- we have significantly enhanced our field mapping exercises and field trips. While fully retaining the traditional approaches and advantages of field instruction, GeoPads offer important benefits in the development of students' spatial reasoning skills. GeoPads enable students to record observations and directly create geologic maps in the field, using a combination of an electronic field notebook (Microsoft OneNote) tightly integrated with pen-enabled GIS software (ArcGIS-ArcMap). Specifically, this arrangement permits students to analyze and manipulate their data in multiple contexts and representations -- while still in the field -- using both traditional 2-D map views, as well as richer 3-D contexts. Such enhancements provide students with powerful exploratory tools that aid the development of spatial reasoning skills, allowing more intuitive interactions with 2-D representations of our 3-D world. Additionally, field-based GIS mapping enables better error-detection, through immediate interaction with current observations in the context of both supporting data (e.g., topographic maps, aerial photos, magnetic surveys) and students' ongoing observations. The overall field-based IT approach also provides students with experience using tools that are increasingly relevant to their future academic or professional careers.

  1. Electron-electron interactions in graphene field-induced quantum dots in a high magnetic field

    DEFF Research Database (Denmark)

    Orlof, A.; Shylau, Artsem; Zozoulenko, I. V.

    2015-01-01

    We study the effect of electron-electron interaction in graphene quantum dots defined by an external electrostatic potential and a high magnetic field. To account for the electron-electron interaction, we use the Thomas-Fermi approximation and find that electron screening causes the formation...... of compressible strips in the potential profile and the electron density. We numerically solve the Dirac equations describing the electron dynamics in quantum dots, and we demonstrate that compressible strips lead to the appearance of plateaus in the electron energies as a function of the magnetic field. Finally...

  2. Advancement of High Temperature Black Liquor Gasification Technology

    Energy Technology Data Exchange (ETDEWEB)

    Craig Brown; Ingvar Landalv; Ragnar Stare; Jerry Yuan; Nikolai DeMartini; Nasser Ashgriz

    2008-03-31

    Weyerhaeuser operates the world's only commercial high-temperature black liquor gasifier at its pulp mill in New Bern, NC. The unit was started-up in December 1996 and currently processes about 15% of the mill's black liquor. Weyerhaeuser, Chemrec AB (the gasifier technology developer), and the U.S. Department of Energy recognized that the long-term, continuous operation of the New Bern gasifier offered a unique opportunity to advance the state of high temperature black liquor gasification toward the commercial-scale pressurized O2-blown gasification technology needed as a foundation for the Forest Products Bio-Refinery of the future. Weyerhaeuser along with its subcontracting partners submitted a proposal in response to the 2004 joint USDOE and USDA solicitation - 'Biomass Research and Development Initiative'. The Weyerhaeuser project 'Advancement of High Temperature Black Liquor Gasification' was awarded USDOE Cooperative Agreement DE-FC26-04NT42259 in November 2004. The overall goal of the DOE sponsored project was to utilize the Chemrec{trademark} black liquor gasification facility at New Bern as a test bed for advancing the development status of molten phase black liquor gasification. In particular, project tasks were directed at improvements to process performance and reliability. The effort featured the development and validation of advanced CFD modeling tools and the application of these tools to direct burner technology modifications. The project also focused on gaining a fundamental understanding and developing practical solutions to address condensate and green liquor scaling issues, and process integration issues related to gasifier dregs and product gas scrubbing. The Project was conducted in two phases with a review point between the phases. Weyerhaeuser pulled together a team of collaborators to undertake these tasks. Chemrec AB, the technology supplier, was intimately involved in most tasks, and focused primarily on the

  3. Building Next-Generation Technologies for Low-Cost Gene Synthesis and High-Accuracy Genome Engineering

    OpenAIRE

    2014-01-01

    The technologies that enable writing and editing of DNA form the foundation of modern molecular biology and biotechnology. However, a number of methodological barriers have limited the widespread adoption of both high-throughput de novo gene synthesis and large-scale genome alteration. Increasingly, work in the fields of synthetic biology, protein design, and gene therapy has been hindered by shortcomings in current DNA writing and editing technologies. The goal of this dissertation has be...

  4. DIGITAL ANALYSIS TECHNOLOGY FOR MORPHOLOGY OF POLYMER CHAIN COILS IN FLOW FIELDS

    Institute of Scientific and Technical Information of China (English)

    Chi-xing Zhou; Hong Zheng; Wei Yu; Ji-feng Yao; Yu-cheng Li

    2005-01-01

    Polymer chain coils with entanglement is a crucial scale of structures in polymer materials since their relaxation times are matching practical processing times. Based on the phenomenological model of polymer chain coils and a new finite element approach, we have designed a computer software including solver, pre- and post-processing modules, and developed a digital analysis technology for the morphology of polymer chain coils in flow fields (DAMPC). Using this technology we may simulate the morphology development of chain coils in various flow fields, such as simple shear flow, elongational flow,and any complex flow at transient or steady state. The applications made up to now show that the software predictions are comparable with experimental results.

  5. Dosimetry in radiation fields around high-energy proton accelerators

    CERN Document Server

    Agosteo, S; Silari, M; Theis, C

    2008-01-01

    Radiation dosimetry at high-energy proton accelerators is a difficult task because of the complexity of the stray radiation field. A good knowledge of this mixed radiation field is very important to be able to select the type of detectors (active and/or passive) to be employed for routine area monitoring and to choose the personal dosimeter legally required for estimating the effective dose received by individuals. At the same time, the response function of the detectors to the mixed field must be thoroughly understood. A proper calibration of a device, which may involve a complex series of measurements in various reference fields, is needed. Monte Carlo simulations provide a complementary – and sometimes the principal – mean of determining the response function. The ambient dose equivalent rates during operation range from a few hundreds of μSv per year to a few mSv per year. To measure such rates one needs detectors of high sensitivity and/or capable of integrating over long periods. The main challenge...

  6. Technology-Assisted Learning: A Longitudinal Field Study of Knowledge Category, Learning Effectiveness and Satisfaction in Language Learning

    Science.gov (United States)

    Hui, W.; Hu, P. J.-H.; Clark, T. H. K.; Tam, K. Y.; Milton, J.

    2008-01-01

    A field experiment compares the effectiveness and satisfaction associated with technology-assisted learning with that of face-to-face learning. The empirical evidence suggests that technology-assisted learning effectiveness depends on the target knowledge category. Building on Kolb's experiential learning model, we show that technology-assisted…

  7. Field Assessment and Specification Review for Roller-Integrated Compaction Monitoring Technologies

    Directory of Open Access Journals (Sweden)

    David J. White

    2011-01-01

    Full Text Available Roller-integrated compaction monitoring (RICM technologies provide virtually 100-percent coverage of compacted areas with real-time display of the compaction measurement values. Although a few countries have developed quality control (QC and quality assurance (QA specifications, broader implementation of these technologies into earthwork construction operations still requires a thorough understanding of relationships between RICM values and traditional in situ point test measurements. The purpose of this paper is to provide: (a an overview of two technologies, namely, compaction meter value (CMV and machine drive power (MDP; (b a comprehensive review of field assessment studies, (c an overview of factors influencing statistical correlations, (d modeling for visualization and characterization of spatial nonuniformity; and (e a brief review of the current specifications.

  8. Field Measurements of Perceived Air Quality in the Test-Bed for Innovative Climate Conditioning Technologies

    DEFF Research Database (Denmark)

    Kolarik, Jakub; Toftum, Jørn; Kabrhel, Michal

    , relative humidity and CO2 concentration. Results showed that the mean sensory pollution load in the tested offices was 0.09±0.02 olf/m2 (mean±SEM). This refers to a low-polluting building according to CEN Report CR 1752. The acceptability of the air quality was worst in unoccupied offices ventilated at 20...... m3/h. Application of DCV decreased the CO2 concentration, but did not result in statistically significant improvement of the perceived air quality. It was not possible to quantify the influence on the sensory pollution load of particular technologies tested as part of the Clear-up. However......Field measurements of perceived air quality were conducted in an experimental test bed for innovative building technologies situated at the Czech Technical University in Prague. The technologies included photocatalytically active paint, vacuum porous insulation and wall plaster containing phase...

  9. Public demonstration projects and field trials: Accelerating commercialisation of sustainable technology in solar photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Brown, James [Cass Business School, City University, 106 Bunhill Row, London EC1Y 8TZ (United Kingdom)], E-mail: j.e.brown@city.ac.uk; Hendry, Chris [Cass Business School, City University, 106 Bunhill Row, London EC1Y 8TZ (United Kingdom)], E-mail: c.n.hendry@city.ac.uk

    2009-07-15

    The paper considers the role of government funded demonstration projects and field trials (DTs) in accelerating the commercialisation of new energy technologies that meet a public good but do not have immediate market appeal [Sagar, A.D., van der Zwaan, B., 2006. Technological innovation in the energy sector: R and D, deployment, and learning-by-doing. Energy Policy 34, 2601-2608]. Drawing on an original database of DTs in the EU, Japan and USA from 1973 to 2004, we review the history of DTs in photovoltaic technology for electricity generation, and its subsequent take up as a commercial energy source. We find that DTs that are aimed purely at discovering suitable market opportunities are less successful in achieving diffusion than projects that target a particular application and concentrate resources on it. The former nevertheless have a vital role to play in the learning process, while a targeted focus is often dependent on national industrial and institutional factors.

  10. Public demonstration projects and field trials. Accelerating commercialisation of sustainable technology in solar photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Brown, James; Hendry, Chris [Cass Business School, City University, 106 Bunhill Row, London EC1Y 8TZ (United Kingdom)

    2009-07-15

    The paper considers the role of government funded demonstration projects and field trials (DTs) in accelerating the commercialisation of new energy technologies that meet a public good but do not have immediate market appeal [Sagar, A.D., van der Zwaan, B., 2006. Technological innovation in the energy sector: R and D, deployment, and learning-by-doing. Energy Policy 34, 2601-2608]. Drawing on an original database of DTs in the EU, Japan and USA from 1973 to 2004, we review the history of DTs in photovoltaic technology for electricity generation, and its subsequent take up as a commercial energy source. We find that DTs that are aimed purely at discovering suitable market opportunities are less successful in achieving diffusion than projects that target a particular application and concentrate resources on it. The former nevertheless have a vital role to play in the learning process, while a targeted focus is often dependent on national industrial and institutional factors. (author)

  11. Gyrotrons for High-Power Terahertz Science and Technology at FIR UF

    Science.gov (United States)

    Idehara, Toshitaka; Sabchevski, Svilen Petrov

    2016-10-01

    In this review paper, we present the recent progress in the development of a series of gyrotrons at the Research Center for Development of Far-Infrared Region, University of Fukui, that have opened the road to many novel applications in the high-power terahertz science and technology. The current status of the research in this actively developing field is illustrated by the most representative examples in which the developed gyrotrons are used as powerful and frequency-tunable sources of coherent radiation operating in a continuous-wave regime. Among them are high-precision spectroscopic techniques (most notably dynamic nuclear polarization-nuclear magnetic resonance, electron spin resonance, X-ray detected magnetic resonance, and studies of the hyperfine splitting of the energy levels of positronium), treatment and characterization of advanced materials, and new medical technologies.

  12. Gyrotrons for High-Power Terahertz Science and Technology at FIR UF

    Science.gov (United States)

    Idehara, Toshitaka; Sabchevski, Svilen Petrov

    2017-01-01

    In this review paper, we present the recent progress in the development of a series of gyrotrons at the Research Center for Development of Far-Infrared Region, University of Fukui, that have opened the road to many novel applications in the high-power terahertz science and technology. The current status of the research in this actively developing field is illustrated by the most representative examples in which the developed gyrotrons are used as powerful and frequency-tunable sources of coherent radiation operating in a continuous-wave regime. Among them are high-precision spectroscopic techniques (most notably dynamic nuclear polarization-nuclear magnetic resonance, electron spin resonance, X-ray detected magnetic resonance, and studies of the hyperfine splitting of the energy levels of positronium), treatment and characterization of advanced materials, and new medical technologies.

  13. Is Sordac’s Rapid Acquisition Process Best Prepared To Field Solutions For Future Technological Challenges

    Science.gov (United States)

    2016-03-31

    to leverage game changing technologies such as cyber, robotics , nanotechnology, and ISR to ensure our comparative advantage and ability to achieve...hiring for acquisition workforce positions.”39 Also a dual-track career path would be “established that permits officers and enlisted personnel to...gain experience in a primary career in combat arms and a secondary career in the acquisition field.”40 H.R. 1597 is one of many vehicles attempting

  14. Examining Volcanic Terrains Using In Situ Geochemical Technologies; Implications for Planetary Field Geology

    Science.gov (United States)

    Young, K. E.; Bleacher, J. E.; Evans, C. A.; Rogers, A. D.; Ito, G.; Arzoumanian, Z.; Gendreau, K.

    2015-01-01

    Regardless of the target destination for the next manned planetary mission, the crew will require technology with which to select samples for return to Earth. The six Apollo lunar surface missions crews had only the tools to enable them to physically pick samples up off the surface or from a boulder and store those samples for return to the Lunar Module and eventually to Earth. Sample characterization was dependent upon visual inspection and relied upon their extensive geology training. In the four decades since Apollo however, great advances have been made in traditionally laboratory-based instrument technologies that enable miniaturization to a field-portable configuration. The implications of these advancements extend past traditional terrestrial field geology and into planetary surface exploration. With tools that will allow for real-time geochemical analysis, an astronaut can better develop a series of working hypotheses that are testable during surface science operations. One such technology is x-ray fluorescence (XRF). Traditionally used in a laboratory configuration, these instruments have now been developed and marketed commercially in a field-portable mode. We examine this technology in the context of geologic sample analysis and discuss current and future plans for instrument deployment. We also discuss the development of the Chromatic Mineral Identification and Surface Texture (CMIST) instrument at the NASA Goddard Space Flight Center (GSFC). Testing is taking place in conjunction with the RIS4E (Remote, In Situ, and Synchrotron Studies for Science and Exploration) SSERVI (Solar System Exploration and Research Virtual Institute) team activities, including field testing at Kilauea Volcano, HI..

  15. GeoPad: Innovative Applications of Information Technology in Field Science Education

    Science.gov (United States)

    Knoop, P. A.; van der Pluijm, B.

    2003-12-01

    A core requirement for most undergraduate degrees in the Earth sciences is a course in field geology, which provides students with training in field science methodologies, including geologic mapping. The University of Michigan Geological Sciences' curriculum includes a seven-week, summer field course, GS-440, based out of the university's Camp Davis Geologic Field Station, near Jackson, WY. Such field-based courses stand to benefit tremendously from recent innovations in Information Technology \\(IT\\), especially in the form of increasing portability, new haptic interfaces for personal computers, and advancements in Geographic Information System \\(GIS\\) software. Such innovations are enabling in-the-field, real-time access to powerful data collection, analysis, visualization, and interpretation tools. The benefits of these innovations, however, can only be realized on a broad basis when the IT reaches a level of maturity at which users can easily employ it to enhance their learning experience and scientific activities, rather than the IT itself being a primary focus of the curriculum or a constraint on field activities. The GeoPad represents a combination of these novel technologies that achieves that goal. The GeoPad concept integrates a ruggedized Windows XP TabletPC equipped with wireless networking, a portable GPS receiver, digital camera, microphone-headset, voice-recognition software, GIS, and supporting, digital, geo-referenced data-sets. A key advantage of the GeoPad is enabling field-based usage of visualization software and data focusing on \\(3D\\) geospatial relationships \\(developed as part of the complementary GeoWall initiative\\), which provides a powerful new tool for enhancing and facilitating undergraduate field geology education, as demonstrated during the summer 2003 session of GS-440. In addition to an education in field methodologies, students also gain practical experience using IT that they will encounter during their continued

  16. Local Field Distribution Function and High Order Field Moments for metal-dielectric composites.

    Science.gov (United States)

    Genov, Dentcho A.; Sarychev, Andrey K.; Shalaev, Vladimir M.

    2001-11-01

    In a span of two decades the physics of nonlinear optics saw vast improvement in our understanding of optical properties for various inhomogeneous mediums. One such medium is the metal-dielectric composite, where the metal inclusions have a surface coverage fraction of p, while the rest (1-p) is assumed to represent the dielectric host. The computations carried out by using different theoretical models and the experimental data show existence of giant local electric and magnetic field fluctuations. In this presentation we will introduce a new developed 2D model that determines exactly the Local Field Distribution Function (LFDF) and all other relevant parameters of the film. The LFDF for small filling factors will be shown to transform from lognormal distribution into a single-dipole distribution function. We also will confirm the predictions of the scaling theory for the high field moments, which have a power law dependence on the loss factor.

  17. Field Evaluations Test Plan for Validation of Alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel

    Science.gov (United States)

    Lewis, Pattie

    2005-01-01

    Headquarters National Aeronautics and Space Administration (NASA) chartered the Acquisition Pollution Prevention (AP2) Office to coordinate agency activities affecting pollution prevention issues identified during system and component acquisition and sustainment processes. The primary objectives of the AP2 Office are to: (1) Reduce or eliminate the use of hazardous materials (HazMats) or hazardous processes at manufacturing, remanufacturing, and sustainment locations. (2) Avoid duplication of effort in actions required to reduce or eliminate HazMats through joint center cooperation and technology sharing. To achieve a substrate condition suitable for the application of a coating system, both new and old (in-situ) substrates must undergo some type of surface preparation and/or depainting operation to ensure adhesion of the new coating system. The level of cleanliness or anchor profile desired is typically a function of the type of coating to be applied and the specification being adhered to. In high performance environments, cleanliness and surface profile requirements for carbon steel (the dominant substrate for facilities, structures and equipment) dictates the use of abrasive media. Many of the abrasive media currently used across NASA and Air Force Space Command (AFSPC) installations generate large quantities of fugitive particulate emissions and waste. The high quantities of airborne dust and waste generated from these operations pose significant environmental concern. Efforts to contain emissions and the reduce quantity of waste generated have significant implications on project cost; this is often a deterrent to engaging in maintenance activities. In response to recent technological developments and NASA's and AFSPC's need to undertake environmentally conscious corrosion prevention projects, a review of the industry needs to be undertaken to evaluate surface preparation technologies (materials and processes) for embrace. This project will identify, evaluate

  18. Increasing Heavy Oil Reserves in the Wilmington Oil Field Through Advanced Reservoir Characterization and Thermal Production Technologies, Class III

    Energy Technology Data Exchange (ETDEWEB)

    City of Long Beach; Tidelands Oil Production Company; University of Southern California; David K. Davies and Associates

    2002-09-30

    The objective of this project was to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California through the testing and application of advanced reservoir characterization and thermal production technologies. It was hoped that the successful application of these technologies would result in their implementation throughout the Wilmington Field and, through technology transfer, will be extended to increase the recoverable oil reserves in other slope and basin clastic (SBC) reservoirs.

  19. Increasing Heavy Oil Reserves in the Wilmington Oil Field Through Advanced Reservoir Characterization and Thermal Production Technologies, Class III

    Energy Technology Data Exchange (ETDEWEB)

    City of Long Beach; Tidelands Oil Production Company; University of Southern California; David K. Davies and Associates

    2002-09-30

    The objective of this project was to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California through the testing and application of advanced reservoir characterization and thermal production technologies. The successful application of these technologies would result in expanding their implementation throughout the Wilmington Field and, through technology transfer, to other slope and basin clastic (SBC) reservoirs.

  20. Strong-field relativistic processes in highly charged ions

    Energy Technology Data Exchange (ETDEWEB)

    Postavaru, Octavian

    2010-12-08

    In this thesis we investigate strong-field relativistic processes in highly charged ions. In the first part, we study resonance fluorescence of laser-driven highly charged ions in the relativistic regime by solving the time-dependent master equation in a multi-level model. Our ab initio approach based on the Dirac equation allows for investigating highly relativistic ions, and, consequently, provides a sensitive means to test correlated relativistic dynamics, bound-state quantum electrodynamic phenomena and nuclear effects by applying coherent light with x-ray frequencies. Atomic dipole or multipole moments may be determined to unprecedented accuracy by measuring the interference-narrowed fluorescence spectrum. Furthermore, we investigate the level structure of heavy hydrogenlike ions in laser beams. Interaction with the light field leads to dynamic shifts of the electronic energy levels, which is relevant for spectroscopic experiments. We apply a fully relativistic description of the electronic states by means of the Dirac equation. Our formalism goes beyond the dipole approximation and takes into account non-dipole effects of retardation and interaction with the magnetic field components of the laser beam. We predicted cross sections for the inter-shell trielectronic recombination (TR) and quadruelectronic recombination processes which have been experimentally confirmed in electron beam ion trap measurements, mainly for C-like ions, of Ar, Fe and Kr. For Kr{sup 30}+, inter-shell TR contributions of nearly 6% to the total resonant photorecombination rate were found. (orig.)