WorldWideScience

Sample records for technology foundations element

  1. Advanced finite element technologies

    CERN Document Server

    Wriggers, Peter

    2016-01-01

    The book presents an overview of the state of research of advanced finite element technologies. Besides the mathematical analysis, the finite element development and their engineering applications are shown to the reader. The authors give a survey of the methods and technologies concerning efficiency, robustness and performance aspects. The book covers the topics of mathematical foundations for variational approaches and the mathematical understanding of the analytical requirements of modern finite element methods. Special attention is paid to finite deformations, adaptive strategies, incompressible, isotropic or anisotropic material behavior and the mathematical and numerical treatment of the well-known locking phenomenon. Beyond that new results for the introduced approaches are presented especially for challenging nonlinear problems.

  2. Proceedings Foundations for Interface Technologies

    CERN Document Server

    Legay, Axel; 10.4204/EPTCS.46

    2011-01-01

    FIT stands for Foundations of Interface Technologies. Component-based design is widely considered as a major approach to developing systems in a time and cost effective way. Central in this approach is the notion of an interface. Interfaces summarize the externally visible properties of a component and are seen as a key to achieving component interoperability and to predict global system behavior based on the component behavior. To capture the intricacy of complex software products, rich interfaces have been proposed. These interfaces do not only specify syntactic properties, such as the signatures of methods and operations, but also take into account behavioral and extra-functional properties, such as quality of service, security and dependability. Rich interfaces have been proposed for describing, e.g., the legal sequences of messages or method calls accepted by components, or the resource and timing constraints in embedded software. The development of a rigorous framework for the specification and analysis...

  3. Internetworking technological foundations and applications

    CERN Document Server

    Meinel, Christoph

    2013-01-01

    This book is supposed to serve as a comprehensive and instructive guide through the new world of digital communication. On the physical layer optical and electrical cabling technology are described as well as wireless communication technologies. On the data link layer local area networks (LANs) are introduced together with the most popular LAN technologies such as Ethernet, Token Ring, FDDI, and ATM as well as wireless LAN technologies including IEEE 802.x, Bluetooth, or ZigBee. A wide range of WAN technologies are covered including contemporary high speed technologies like PDH and SDH up to h

  4. Foundations of semantic web technologies

    CERN Document Server

    Hitzler, Pascal; Rudolph, Sebastian

    2009-01-01

    The Quest for Semantics Building Models Calculating with Knowledge Exchanging Information Semanic Web Technologies RESOURCE DESCRIPTION LANGUAGE (RDF)Simple Ontologies in RDF and RDF SchemaIntroduction to RDF Syntax for RDF Advanced Features Simple Ontologies in RDF Schema Encoding of Special Data Structures An ExampleRDF Formal Semantics Why Semantics? Model-Theoretic Semantics for RDF(S) Syntactic Reasoning with Deduction Rules The Semantic Limits of RDF(S)WEB ONTOLOGY LANGUAGE (OWL) Ontologies in OWL OWL Syntax and Intuitive Semantics OWL Species The Forthcoming OWL 2 StandardOWL Formal Sem

  5. ARCTIC FOUNDATIONS, INC. FREEZE BARRIER TECHNOLOGY; INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    Arctic Foundations, Inc. (AFI), of Anchorage, Alaska has developed a freeze barrier technology designed to prevent the migration of contaminants in groundwater by completely isolating contaminant source areas until appropriate remediation techniques can be applied. With this tech...

  6. Theoretical and methodological foundations of technological management

    Directory of Open Access Journals (Sweden)

    L.O. Ligonenko

    2016-09-01

    Full Text Available The aim of the article. In the article there are critically analyzed the existing developments about the content, objectives and functions of technological management, which allowed to identify such approaches as target, process, functional, philosophical, resource and competitive ones. The results of the analysis. While integrating them there was formed the author's interpretation of theoretical and methodological foundations of this relatively new functional type of management for Ukraine, which represented the system of principles and methods of taking and implementing complex management decisions aimed at efficient use of available technological resources and technological development of the company. There are also grounded the purposes of technological management, which are: technological development of enterprises, that is purposeful, continuous (constantly organized process of irreversible changes in production processes (technologies of enterprise economic activity that provoke (cause the corresponding development of the fixed assets (which provide them, staff (which implements and use them and intangible assets (which identify their creation or use, which together enable to ensure technological competitiveness of the enterprise and development of the market of technologies in general. The object of such management is defined, which are: technological processes, preconditions (technological potential and the consequences of their implementation (technological competitiveness of the enterprise. There are identified the key subjects of technological management, their interests and spheres of responsibilities. The methodological basis of technological management is considered to be the concept of open innovations by H. Chesbro which, on the one hand, means deliberate involvement of external ideas and technologies; active cooperation of all stakeholders in the company as to the formation of new ideas aimed at systematic improving the product

  7. Foundational Forces & Hidden Variables in Technology Commercialization

    Science.gov (United States)

    Barnett, Brandon

    2011-03-01

    The science of physics seems vastly different from the process of technology commercialization. Physics strives to understand our world through the experimental deduction of immutable laws and dependent variables and the resulting macro-scale phenomenon. In comparison, the~goal of business is to make a profit by addressing the needs, preferences, and whims of individuals in a market. It may seem that this environment is too dynamic to identify all the hidden variables and deduct the foundational forces that impact a business's ability to commercialize innovative technologies. One example of a business ``force'' is found in the semiconductor industry. In 1965, Intel co-founder Gordon Moore predicted that the number of transistors incorporated in a chip will approximately double every 24 months. Known as Moore's Law, this prediction has become the guiding principle for the semiconductor industry for the last 40 years. Of course, Moore's Law is not really a law of nature; rather it is the result of efforts by Intel and the entire semiconductor industry. A closer examination suggests that there are foundational principles of business that underlie the macro-scale phenomenon of Moore's Law. Principles of profitability, incentive, and strategic alignment have resulted in a coordinated influx of resources that has driven technologies to market, increasing the profitability of the semiconductor industry and optimizing the fitness of its participants. New innovations in technology are subject to these same principles. So, in addition to traditional market forces, these often unrecognized forces and variables create challenges for new technology commercialization. In this talk, I will draw from ethnographic research, complex adaptive theory, and industry data to suggest a framework with which to think about new technology commercialization. Intel's bio-silicon initiative provides a case study.

  8. Beam Elements on Linear Variable Two-Parameter Elastic Foundation

    Directory of Open Access Journals (Sweden)

    Iancu-Bogdan Teodoru

    2008-01-01

    Full Text Available The traditional way to overcome the shortcomings of the Winkler foundation model is to incorporate spring coupling by assemblages of mechanical elements such as springs, flexural elements (beams in one-dimension, 1-D, plates in 2-D, shear-only layers and deformed, pretensioned membranes. This is the class of two-parameter foundations ? named like this because they have the second parameter which introduces interactions between adjacent springs, in addition to the first parameter from the ordinary Winkler?s model. This class of models includes Wieghardt, Filonenko-Borodich, Hetényi and Pasternak foundations. Mathematically, the equations to describe the reaction of the two-parameter foundations are equilibrium, and the only difference is the definition of the parameters. In order to analyse the bending behavior of a Euler-Bernoulli beam resting on linear variable two-parameter elastic foundation a (displacement Finite Element (FE formulation, based on the cubic displacement function of the governing differential equation, is introduced.

  9. Human Spaceflight Technology Needs - A Foundation for JSC's Technology Strategy

    Science.gov (United States)

    Stecklein, Jonette M.

    2013-01-01

    disciplines. The TechNeeds Database greatly clarifies understanding of the complex relationships of critical technologies to mission and architecture element needs. Extensions to the core TechNeeds Database allow JSC to factor in and appropriately weight JSC Center Core Technology Competencies, and considerations of Commercialization Potential and Partnership Potential. The inherent coupling among these, along with an appropriate importance weighting, has provided an initial prioritization for allocation of technology development research funding for JSC. The HAT Technology Needs Database, with a core of built-in reports, clarifies and communicates complex technology needs for cost effective human space exploration such that an organization seeking to assure that research prioritization supports human spaceflight of the future can be successful.

  10. Relativity foundations & philosophy of science & technology

    CERN Document Server

    Angel, Roger B

    1980-01-01

    Relativity: The Theory and its Philosophy provides a completely self-contained treatment of the philosophical foundations of the theory of relativity. It also surveys the most essential mathematical techniques and concepts that are indispensable to an understanding of the foundations of both the special and general theories of relativity. In short, the book includes a crash course in applied mathematics, ranging from elementary trigonometry to the classical tensor calculus.Comprised of 11 chapters, this book begins with an introduction to fundamental mathematical concepts such as sets, relatio

  11. ARCTIC FOUNDATIONS, INC. FREEZE BARRIER SYSTEM - SITE TECHNOLOGY CAPSULE

    Science.gov (United States)

    Arctic Foundations, Inc. (AFI), of Anchorage, Alaska has developed a freeze barrier technology designed to prevent the migration of contaminants in groundwater by completely isolating contaminant source areas until appropriate remediation techniques can be applied. With this tec...

  12. Technology Foundations for Computational Evaluation of Software Security Attributes

    Science.gov (United States)

    2006-12-01

    Technology Foundations for Computational Evaluation of Software Security Attributes Gwendolyn H. Walton Thomas A. Longstaff Richard C...security attributes to the functional behavior of the software . The emergence of CERT’s new function extraction (FX) technology , unavailable to previous... software meets security requirements if they have been specified in behavioral terms. FX technology prescribes effective means to create and record

  13. Elements of plasma technology

    CERN Document Server

    Wong, Chiow San

    2016-01-01

    This book presents some fundamental aspects of plasma technology that are important for beginners interested to start research in the area of plasma technology . These include the properties of plasma, methods of plasma generation and basic plasma diagnostic techniques. It also discusses several low cost plasma devices, including pulsed plasma sources such as plasma focus, pulsed capillary discharge, vacuum spark and exploding wire; as well as low temperature plasmas such as glow discharge and dielectric barrier discharge which the authors believe may have potential applications in industry. The treatments are experimental rather than theoretical, although some theoretical background is provided where appropriate. The principles of operation of these devices are also reviewed and discussed.

  14. Materials- the foundation for technology revolutions

    Institute of Scientific and Technical Information of China (English)

    Zhong Lin Wang

    2011-01-01

    It is my greatest honor to learn that Professor SHI Changxu was a recipient of the China's National Top Award in Science and Technology in 2010 owing to his pioneer and strategic contributions to the development of materials in China and world. This award represents the strongest endorsement of not onlythe society to the contribution made by Professor Shi in materials,

  15. Investigations on macro-element modelling of bucket foundations for offshore wind turbines

    OpenAIRE

    Foglia, Aligi; Govoni, Laura; Gottardi, Guido; Ibsen, Lars Bo

    2014-01-01

    In this report a macro-element model for bucket foundations is formulated and validated against small-scale experimental results. The topics investigated are the response of the foundation under general monotonic loading and the long-term accumulated displacements under cyclic loading. The macro-model for shallow foundations proposed by Nova and Montrasio (1991) is modified to comply with the response of skirted foundations for offshore wind turbines under general loading. On the base of di P...

  16. Thermionic fuel element technology status

    Science.gov (United States)

    Holland, J. W.; Horner, M. W.; Yang, L.

    1985-01-01

    The results of research, conducted between the mid-1960s and 1973, on the multiconverter thermionic fuel elements (TFEs) that comprise the reactor core of an SP-100 thermionic reactor system are presented. Fueled-emitter technology, insulator technology and cell and TFE assembly technology of the prototypical TFEs which were tested in-pile and out-of-pile during these years are described. The proto-TFEs have demonstrated reproducible performance within 5 percent and no premature failures within the 1.5 yr of operation (with projected 3-yr lifetimes). The two primary life-limiting factors had been identified as thermionic emitter dimensional increase due to interactions with the fuel and electrical insulator structural damage from fast neutrons. Multiple options for extending TFE lifetimes to 7 yr or longer are available and will be investigated in the 1984-1985 SP-100 program for resolution of critical technology issues. Design diagrams and test graphs are included.

  17. Experiments of Multi-element Composite Foundation with Steel Pipe Pile and Gravel Pile

    Institute of Scientific and Technical Information of China (English)

    WANG Xian-zhi; ZHENG Jun-jie

    2008-01-01

    A set of self-developed apparatus for foundation physical model were utilized to conduct model tests of the multi-element composite foundation with a steel pipe pile and several gravel piles. Some load-bearing characteristics of the multi-element composite foundation, including the curves of foundation settlement, stresses of piles, pile-soil stress ratio, and load-sharing ratio of piles and soil, were obtained to study its working performances in silty sand soil. The experimental results revealed that the multi-element composite foundation with steel pipe pile and gravel pile contributed more than the gravel pile composite foundation in improving the bearing capacity of the silty fine sand.

  18. Study of a 3D-Finite Element Calculation of Bucket Foundation

    DEFF Research Database (Denmark)

    André Larsen, Kim; Ibsen, Lars Bo

    2004-01-01

    as the wind turbines are getting larger and more effective. The behaviour of bucket foundations located in saturated dense sand has been investigated by use of model tests. One of the methods to predict the response of a full size bucket foundation is the Finite Element Method, FEM. This method has been used......The bucket foundation is a new type of foundation, which has been developed over the past 3 years and today it is used for a Vestas V90-3.0 MW offshore wind turbine as a prototype. Ibsen et al.(2003). The bucket foundation is believed to have great potential in the future offshore wind parks...... to back calculate the response of the model tests in the laboratory. It has been shown that a three-dimensional Finite Element model is a useful method to predict the behaviour of bucket foundations for offshore wind turbines installed in saturated sand....

  19. Foundations of software technology and theoretical computer science

    Energy Technology Data Exchange (ETDEWEB)

    Madhavan, C.E.V. (Indian Inst. of Science, Bangalore (IN))

    1990-01-01

    The papers in this book report on foundations of software technology and theoretical computer science project research results. The authors report on algorithmics: design and analysis of graph, geometric, algebraic and VLSI algorithms; data structures; average analysis; complexity theory; parallel parsing; concurrency; algebraic semantics, event structures; logic programming; algebraic properties, semantics; and software technology: program transformations, algebraic methods. These results together with the formal techniques employed to present them reflect current trends pursued by research groups around the world. The papers treat their topics by reviewing existing results, developing and demonstrating new techniques and suggesting further directions for research.

  20. Investigations on macro-element modelling of bucket foundations for offshore wind turbines

    DEFF Research Database (Denmark)

    Foglia, Aligi; Govoni, Laura; Gottardi, Guido;

    In this report a macro-element model for bucket foundations is formulated and validated against small-scale experimental results. The topics investigated are the response of the foundation under general monotonic loading and the long-term accumulated displacements under cyclic loading. The macro-...

  1. Simulation Studies on the Settlement of Composite Foundation with Contact Element of Zero Thickness

    Institute of Scientific and Technical Information of China (English)

    Dong Bichang; Wang Jingtao; Cheng Tao

    2005-01-01

    The various factors influencing the settlement of composite foundation have been more completely studied through numerical simulation. The influence on the settlement of composite foundation of the geometry and mechanical properties of the pile, soil, cushion, and the interface between pile and soil have been investigated through computer simulation, in which the contact elements with zero thickness are used. Some valuable conclusions for the settlement of composite foundation have been obtained: (1) The method using the contact element of zero thickness is successful when used in the simulation of the settlement of composite foundation; (2) Among the factors influencing the settlement of composite foundation, the compression modulus of the soil is the largest, and the cohesion of the soil is the second largest; (3) The effects on settlement of the internal friction angle of the soil, the elastic modulus, the radius, and the length of the pile, and the elestic modulus of the cushion are also more obvious.

  2. Foundations of the complex variable boundary element method

    CERN Document Server

    Hromadka, Theodore

    2014-01-01

    This book explains and examines the theoretical underpinnings of the Complex Variable Boundary Element Method (CVBEM) as applied to higher dimensions, providing the reader with the tools for extending and using the CVBEM in various applications. Relevant mathematics and principles are assembled and the reader is guided through the key topics necessary for an understanding of the development of the CVBEM in both the usual two- as well as three- or higher dimensions. In addition to this, problems are provided that build upon the material presented. The Complex Variable Boundary Element Method (CVBEM) is an approximation method useful for solving problems involving the Laplace equation in two dimensions. It has been shown to be a useful modelling technique for solving two-dimensional problems involving the Laplace or Poisson equations on arbitrary domains. The CVBEM has recently been extended to 3 or higher spatial dimensions, which enables the precision of the CVBEM in solving the Laplace equation to be now ava...

  3. The Application of Foundation Pit Monitoring Technology to the Excavation

    OpenAIRE

    Qiu Jin; Li Fei

    2015-01-01

    The foundation pit monitoring plays an important role in the foundation pit supporting projects especially in those deep foundation pit projects. Through the whole monitoring of the foundation pit construction from the excavation to the backfill, we can learn about the forcing and deforming process of the foundation pit supporting system, and grasp the impact of external condition changes on the foundation pit. This paper takes a project in Jinan as an example to establish a specific monitori...

  4. FINITE ELEMENT NUMERICAL SIMULATION OF THREE-DIMENSIONAL SEEPAGE CONTROL FOR DEEP FOUNDATION PIT DEWATERING

    Institute of Scientific and Technical Information of China (English)

    LUO Zu-jiang; ZHANG Ying-ying; WU Yong-xia

    2008-01-01

    For deep foundation pit dewatering in the Yangtze River Delta, it is easy to make a dramatic decrease of the underground water level surrounding the dewatering area and cause land subsidence and geologic disasters. In this work, a three-dimensional finite element simulation method was applied in the forth subway of Dongjiadu tunnel repair foundation pit dewatering in Shanghai. In order to control the decrease of the underground water level around the foundation pit, the foundation pit dewatering method was used to design the optimization project of dewatering ,which was simulated under these conditions that the aquifers deposited layer by layer, the bottom of the aquifers went deep to 144.45 m, the retaining wall of foundation pit shield went deep to 65 m, the filters of the extraction wells were located between 44 m to 59 m, the water level in the deep foundation pit was decreased by 34 m, and the maximum decrease of water level outside the foundation pit was 3 m. It is shown that the optimization project and the practical case are consistent with each other. Accordingly, the three-dimensional finite element numerical simulation is the basic theory of optimization design of engineering structures of dewatering in deep foundation pit in such areas.

  5. Scientific and Technological Foundations for Scaling Production of Nanostructured Metals

    Science.gov (United States)

    Lowe, Terry C.; Davis, Casey F.; Rovira, Peter M.; Hayne, Mathew L.; Campbell, Gordon S.; Grzenia, Joel E.; Stock, Paige J.; Meagher, Rilee C.; Rack, Henry J.

    2017-05-01

    Severe Plastic Deformation (SPD) has been explored in a wide range of metals and alloys. However, there are only a few industrial scale implementations of SPD for commercial alloys. To demonstrate and evolve technology for producing ultrafine grain metals by SPD, a Nanostructured Metals Manufacturing Testbed (NMMT) has been established in Golden, Colorado. Machines for research scale and pilot scale Equal Channel Angular Pressing-Conform (ECAP-C) technology have been configured in the NMMT to systematically evaluate and evolve SPD processing and advance the foundational science and technology for manufacturing. We highlight the scientific and technological areas that are critical for scale up of continuous SPD of aluminum, copper, magnesium, titanium, and iron-based alloys. Key areas that we will address in this presentation include the need for comprehensive analysis of starting microstructures, data on operating deformation mechanisms, high pressure thermodynamics and phase transformation kinetics, tribological behaviors, temperature dependence of lubricant properties, adaptation of tolerances and shear intensity to match viscoplastic behaviors, real-time process monitoring, and mechanics of billet/tooling interactions.

  6. Research Data Reusability: Conceptual Foundations, Barriers and Enabling Technologies

    Directory of Open Access Journals (Sweden)

    Costantino Thanos

    2017-01-01

    Full Text Available High-throughput scientific instruments are generating massive amounts of data. Today, one of the main challenges faced by researchers is to make the best use of the world’s growing wealth of data. Data (reusability is becoming a distinct characteristic of modern scientific practice. By data (reusability, we mean the ease of using data for legitimate scientific research by one or more communities of research (consumer communities that is produced by other communities of research (producer communities. Data (reusability allows the reanalysis of evidence, reproduction and verification of results, minimizing duplication of effort, and building on the work of others. It has four main dimensions: policy, legal, economic and technological. The paper addresses the technological dimension of data reusability. The conceptual foundations of data reuse as well as the barriers that hamper data reuse are presented and discussed. The data publication process is proposed as a bridge between the data author and user and the relevant technologies enabling this process are presented.

  7. The Application of Foundation Pit Monitoring Technology to the Excavation

    Directory of Open Access Journals (Sweden)

    Qiu Jin

    2015-01-01

    Full Text Available The foundation pit monitoring plays an important role in the foundation pit supporting projects especially in those deep foundation pit projects. Through the whole monitoring of the foundation pit construction from the excavation to the backfill, we can learn about the forcing and deforming process of the foundation pit supporting system, and grasp the impact of external condition changes on the foundation pit. This paper takes a project in Jinan as an example to establish a specific monitoring program, and then conducts the analysis and evaluation of the monitoring data; the real-time grasp of the foundation pit deformation and internal force changes can help to further ensure the security status of the foundation pit, thus better guiding the construction.

  8. Foundations

    Science.gov (United States)

    Harteveld, Casper

    A building will more likely collapse if it does not have any proper foundations. Similarly, the design philosophy of Triadic Game Design (TGD) needs to reside on solid building blocks, otherwise the concept will collapse as well. In this level I will elaborate on these building blocks. First I will explain what the general idea of TGD is. It is a design philosophy, for sure, but one which stresses that an “optimum” needs to be found in a design space constituted by three different worlds: Reality, Meaning, and Play. Additionally, these worlds need to be considered simultaneously and be treated equally. The latter requires balancing the worlds which may result in different tensions, within and between two or three of the worlds. I continue by discussing each of the worlds and showing their perspective on the field of games with a meaningful purpose. From this, we clearly see that it is feasible to think of each world and that the idea makes sense. I substantiate this further by relating the notion of player and similar approaches to this framework. This level is quite a tough pill to swallow yet essential for finishing the other levels. Do not cheat or simply skip this level, but just take a big cup of coffee or tea and start reading it.

  9. SMART-TUTORIAL AS AN ELEMENT OF THE FOUNDATION OF THE SMART-UNIVERSITY

    Directory of Open Access Journals (Sweden)

    Larisa A. Danchenok

    2014-01-01

    Full Text Available Modern students take a dim view of the traditional education model, therefore, need to develop a training model that has mobility, practice orientation, self-meaking content, reviewing content. The concept of SMART-learning is named to solve this problem, and it is the main element of Foundation of Smart-University.

  10. P–y curves for bucket foundations in sand using finite element modeling

    DEFF Research Database (Denmark)

    Østergaard, Martin Underlin; Knudsen, Bjørn S.; Ibsen, Lars Bo

    2015-01-01

    Pile foundations for offshore wind turbines are often designed using p−y curves, where the soil reaction is given as a function of the pile displacement. The p−y curves are based on experiments done using slender piles, normally used in the oil and gas-industry. The monopiles commonly used today...... than a monopile, thus the before mentioned mismatch is even more pronounced. The purpose of this paper is to use 3D finite element modelling in PLAXIS 3D to establish a new p−y curve formulation for the bucket foundation in sand. The new formulation is based on the results of 18 numerical models...

  11. The foundation mass concrete construction technology of Hongyun Building B tower raft

    Science.gov (United States)

    Liu, Yu; Yin, Suhua; Wu, Yanli; Zhao, Ying

    2017-08-01

    The foundation of Hongyun building B tower is made of raft board foundation which is 3300mm in the thickness and 2800mm beside side of the core tube. It is researched that the raft foundation mass concrete construction technology is expatiated from temperature and cracks of the raft foundation and the temperature control and monitoring of the concrete base slab construction and concrete curing.

  12. 3D time-domain regular grid infinite element in elastic foundation

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The normal dynamic infinite element in elastic foundation cannot be used in time-domain due to it’s inclusive frequency term.A novel 3D regular grid infinite element is constructed to deal with the time-domain problem.This new infinite element method can easily transform the frequency terms of mass matrix and stiffness matrix to the terms in higher-order dynamic equation,thus a higher-order dynamic equilibrium equation is formed.Based on the second-order Wilson-θ dynamic equation,a new time-domain numeric formula of higher-order dynamic equation is deduced,and the time-domain calculation coupling with finite element and infinite element can be realized.The classic 3D fluctuation problem in elastic foundation is employed as an illustrative example to investigate the accuracy and validity of this new infinite element.The result indicates that the new dynamic infinite element has a high accuracy.

  13. Technology Solutions Case Study: Foundation Heat Exchanger, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-03-01

    The foundation heat exchanger, developed by Oak Ridge National Laboratory, is a new concept for a cost-effective horizontal ground heat exchanger that can be connected to water-to-water or water-to-air heat pump systems for space conditioning as well as domestic water heating.

  14. New technology to realize printed radiating elements

    Science.gov (United States)

    Tarot, A. C.; Sharaiha, A.; Terret, C.; Garnier, Y.

    1995-05-01

    A plating process for low-cost dielectric substrates (like polypropylene or foam) has been developed by the CNET (Centre National d'Etudes des Telecommunications) in collaboration with LAM (Laboratoire Antennes et Microelectronique). This process allows the realization of printed radiating elements like microstrip antennas. An example of a multilayered printed antenna realized with this technology is presented with its performance.

  15. A Macro-Element for Dynamic Soil-Structure Interaction Analyses of Shallow Foundations

    CERN Document Server

    Chatzigogos, Charisis; Salençon, Jean

    2008-01-01

    The scope of the paper is to present some aspects of the development of a "macro-element" for dynamic soil-structure interaction analyses of shallow foundations. Initially the concept of "macro-element" is introduced and is illustrated with the aid of a very simple example originating from structural engineering. Then the link is made with the modeling of the dynamic response of shallow foundations and the objectives and structure of such a tool are described with reference to the specific configuration of a circular footing resting on the surface of a heterogeneous purely cohesive soil. The principal features of the "macro-element" are then presented; the soil-structure interaction domain is reduced to a point that coincides with the center of the footing and all the (material and geometric) non-linearities are lumped at this point. A discussion on the most appropriate way to treat these non-linearities is undertaken based on experience gained with earlier works. It is suggested that the non-linearities be i...

  16. Standard cost elements for technology programs

    Science.gov (United States)

    Christensen, Carisa B.; Wagenfuehrer, Carl

    1992-01-01

    The suitable structure for an effective and accurate cost estimate for general purposes is discussed in the context of a NASA technology program. Cost elements are defined for research, management, and facility-construction portions of technology programs. Attention is given to the mechanisms for insuring the viability of spending programs, and the need for program managers is established for effecting timely fund disbursement. Formal, structures, and intuitive techniques are discussed for cost-estimate development, and cost-estimate defensibility can be improved with increased documentation. NASA policies for cash management are examined to demonstrate the importance of the ability to obligate funds and the ability to cost contracted funds. The NASA approach to consistent cost justification is set forth with a list of standard cost-element definitions. The cost elements reflect the three primary concerns of cost estimates: the identification of major assumptions, the specification of secondary analytic assumptions, and the status of program factors.

  17. HAWCStab2 with super element foundations: A new tool for frequency analysis of offshore wind turbines

    DEFF Research Database (Denmark)

    Henriksen, Lars Christian; Hansen, Anders Melchior; Kragh, Knud Abildgaard;

    2013-01-01

    HAWCStab2 is a linear frequency domain aeroelastic tool, developed by DTU Wind Energy, suitable for frequency and stability analysis of horizontal axis 3 bladed wind turbines. This tool has now been extended to also handle complex offshore foundation types, such as jacket structures and floating...... structures with mooring lines, using super elements calculated by the nonlinear time domain aero-elastic code HAWC2. In this work the NREL 5MW Offshore RWT mounted on a jacket support structure is investigated using both HAWC2 and HAWCStab2....

  18. Human spaceflight technology needs-a foundation for JSC's technology strategy

    Science.gov (United States)

    Stecklein, J. M.

    - TechNeeds Database greatly clarifies understanding of the complex relationships of critical technologies to mission and architecture element needs. Extensions to the core TechNeeds Database allow JSC to factor in and appropriately weight JSC core technology competencies, and considerations of commercialization potential and partnership potential. The inherent coupling among these, along with an appropriate importance weighting, has provided an initial prioritization for allocation of technology development research funding at JSc. The HAT Technology Needs Database, with a core of built-in reports, clarifies and communicates complex technology needs for cost effective human space exploration so that an organization seeking to assure that research prioritization supports human spaceflight of the future can be successful.

  19. Prefabricated EPS Elements used as Strip Foundation of a Single-family House with a Double Brick Wall

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    2008-01-01

    A new prefabricated lightweight element was designed for a strip foundation that was demonstrated on site as the base of a single-family house with a double brick wall. The element was placed on a stable surface underneath the top soil layer, just 0.25 m underneath the finished ground surface...

  20. Numerical Analysis of Soil Plug Inside Suction Foundations During Suction Penetration by Discrete Element Method

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The phenomenon of the soil plug usually rising inside the suction foundations during suction penetration was quantitatively described and predicted. The formation process of the soil plug was simulated and calculated by DEM (discrete element method) model. The seepage flow, the self-weight of soil, the friction on the chamber wall as well as the suction inside the chamber are considered as the main external forces in the process. The results are compared with a set of laboratory model tests performed by using three soil types (sand, silty clay and clay) in the Bohai Sea area. The heights of soil plug from numerical estimations are lower than those from model test results, mainly because the suction pressure and friction resistance are applied in an ideal way under the numerical simulation.

  1. Determination of p-y Curves for Bucket Foundations in Sand Using Finite Element Modeling

    DEFF Research Database (Denmark)

    Knudsen, Bjørn S.; Østergaard, Martin Underlin; Ibsen, Lars Bo

    , the suction bucket has a much smaller ratio between length and diameter, and the suction buckets will thus act more as a rigid object during rotation in the soil. To improve the design of suction buckets through analytical methods, the soil pressure needs to be calculated more precisely since currently...... available p􀀀y curves, linking displacement and soil pressure, are based on more slender cylindrical structures. Using finite element methods, the p􀀀y curves for suction buckets will be determined as a function of the internal angle of friction of the soil, the diameter and the skirt length...... of the suction buckets, which can in turn be applied in determination of soil pressures for analytical design methods of suction bucket foundations....

  2. Dynamic-stiffness matrix of embedded and pile foundations by indirect boundary-element method

    Energy Technology Data Exchange (ETDEWEB)

    Wolf, J.P.; Darbre, G.R. (Electrowatt Engineering Services Ltd., Zurich (Switzerland))

    1984-08-01

    The boundary-integral equation method is well suited for the calculation of the dynamic-stiffness matrix of foundations embedded in a layered visco-elastic halfspace (or a transmitting boundary of arbitrary shape), which represents an unbounded domain. It also allows pile groups to be analyzed, taking pile-soil-pile interaction into account. The discretization of this boundary-element method is restricted to the structure-soil interface. All trial functions satisfy exactly the field equations and the radiation condition at infinity. In the indirect boundary-element method distributed source loads of initially unknown intensities act on a source line located in the excavated part of the soil and are determined such that the prescribed boundary conditions on the structure-soil interface are satisfied in an average sense. In the two-dimensional case the variables are expanded in a Fourier integral in the wave number domain, while in three dimensions, Fourier series in the circumferential direction and Bessel functions of the wave number domain, while in three dimensions, Fourier series in the circumferential direction and Bessel functions of the wave number in the radial direction are selected. Accurate results arise with a small number of parameters of the loads acting on a source line which should coincide with the structure-soil interface. In a parametric study the dynamic-stiffness matrices of rectangular foundations of various aspect ratios embedded in a halfplane and in a layer built-in at its base are calculated. For the halfplane, the spring coefficients for the translational directions hardly depend on the embedment, while the corresponding damping coefficients increase for larger embedments, this tendency being more pronounced in the horizontal direction.

  3. Technological foundations of processing tomato pomace in feed additives

    Directory of Open Access Journals (Sweden)

    B. Yegorov

    2015-05-01

    Full Text Available Introduction. Search for new types of alternative raw material for the efficient development of poultry industry and problem of waste disposal of canning industry made it necessary to develop a method of processing tomato pomace in feed additives. Materials and methods. Sampling, preparation and testing were carried out by general and specific organ oleptic and physical-technological methods of assessment and analysis of the properties of raw materials and finished products. Results. Incorporation of tomato pomace in the feed additive reduces the cost of raw materials and expenses associated with moistening of the mixture before extrusion and incorporation of chalk feed will solve the problem of calcium imbalance of laying hens. It was found that extrusion process has improved the physical properties of feed additive and showed the possibility of its use as a feed component: moisture content decreased by 34.5 %, the angle of repose increased by 11.4 %, flowability decreased by 39.7 % and bulk density decreased by 32.3 %. Conclusions. The resulting feed additive will solve the problem of diversification of raw materials, waste, calcium imbalance of laying hens and reduce expenses on compound animal feedstuff production.

  4. Technology Solutions Case Study: Excavationless: Exterior-Side Foundation Insulation for Existing Homes

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-09-01

    Building science research supports installing exterior (soil side) foundation insulation as the optimal method to enhance the hygrothermal performance of new homes. With exterior foundation insulation, water management strategies are maximized while insulating the basement space and ensuring a more even temperature at the foundation wall. This project describes an innovative, minimally invasive foundation insulation upgrade technique on an existing home that uses hydrovac excavation technology combined with a liquid insulating foam. Cost savings over the traditional excavation process ranged from 23% to 50%. The excavationless process could result in even greater savings since replacement of building structures, exterior features, utility meters, and landscaping would be minimal or non-existent in an excavationless process.

  5. The Foundations of Technology Distance Education: A Review of the Literature to 2001

    Science.gov (United States)

    Schulte, Marthann

    2011-01-01

    Distance education is a very popular and intriguing area in the present realm of education. Institutions of higher learning throughout the United States and around the world are quickly embracing distance education to serve thousands of students. This literature review of the foundations of technology distance education culminates in the year…

  6. Berkeley Foundation for Opportunities in Information Technology: A Decade of Broadening Participation

    Science.gov (United States)

    Crutchfield, Orpheus S. L.; Harrison, Christopher D.; Haas, Guy; Garcia, Daniel D.; Humphreys, Sheila M.; Lewis, Colleen M.; Khooshabeh, Peter

    2011-01-01

    The Berkeley Foundation for Opportunities in Information Technology is a decade-old endeavor to expose pre-college young women and underrepresented racial and ethnic minorities to the fields of computer science and engineering, and prepare them for rigorous, university-level study. We have served more than 150 students, and graduated more than 65…

  7. Seismic Analysis of Deep Water Pile Foundation Based on Three-Dimensional Potential-Based Fluid Elements

    Directory of Open Access Journals (Sweden)

    Kai Wei

    2013-01-01

    Full Text Available This paper investigates the use of three-dimensional (3D ϕ-u potential-based fluid elements for seismic analyses of deep water pile foundation. The mathematical derivations of the potential-based formulations are presented for reference. The potential-based modeling technique is studied and validated through experimental data and analytical solutions. Earthquake time history analyses for a 9-pile foundation in dry and different water environments are conducted, respectively. The seismic responses are discussed to investigate the complex effect of earthquake-induced fluid-structure interaction. Through the analyses, the potential-based fluid and interface elements are shown to perform adequately for the seismic analyses of pile foundation-water systems, and some interesting conclusions and recommendations are drawn.

  8. A Tour of Big Data, Open Source Data Management Technologies from the Apache Software Foundation

    Science.gov (United States)

    Mattmann, C. A.

    2012-12-01

    The Apache Software Foundation, a non-profit foundation charged with dissemination of open source software for the public good, provides a suite of data management technologies for distributed archiving, data ingestion, data dissemination, processing, triage and a host of other functionalities that are becoming critical in the Big Data regime. Apache is the world's largest open source software organization, boasting over 3000 developers from around the world all contributing to some of the most pervasive technologies in use today, from the HTTPD web server that powers a majority of Internet web sites to the Hadoop technology that is now projected at over a $1B dollar industry. Apache data management technologies are emerging as de facto off-the-shelf components for searching, distributing, processing and archiving key science data sets both geophysical, space and planetary based, all the way to biomedicine. In this talk, I will give a virtual tour of the Apache Software Foundation, its meritocracy and governance structure, and also its key big data technologies that organizations can take advantage of today and use to save cost, schedule, and resources in implementing their Big Data needs. I'll illustrate the Apache technologies in the context of several national priority projects, including the U.S. National Climate Assessment (NCA), and in the International Square Kilometre Array (SKA) project that are stretching the boundaries of volume, velocity, complexity, and other key Big Data dimensions.

  9. Finite Element Modelling of Infinite Euler Beams on Kelvin Foundations Exposed to Moving Loads in Convected Co-ordinates

    DEFF Research Database (Denmark)

    Andersen, Lars; Nielsen, Søren R.K.; Kirkegaard, Poul Henning

    2001-01-01

    The paper deals with the finite element method (FEM) solution of the problem with loads moving uniformly along an infinite Euler beam supported by a linear elastic Kelvin foundation with linear viscous damping. Initially, the problem is formulatedin a moving co-ordinate system following the load...

  10. A Finite Element Study of the Bending Behavior of Beams Resting on Two-Parameter Elastic Foundation

    Directory of Open Access Journals (Sweden)

    Iancu-Bogdan Teodoru

    2006-01-01

    Full Text Available Although the Winkler’s model is a poor representation of the many practical subgrade or subbase materials, it is widely used in soil-structure problems for almost one and a half century. The foundations represented by Winkler model can not sustain shear stresses, and hence discontinuity of adjacent spring displacements can occur. This is the prime shortcoming of this foundation model which in practical applications may result in significant inaccuracies in the evaluated structural response. In order to overcome these problem many researchers have been proposed various mechanical foundation models considering interaction with the surroundings. Among them we shall mention the class of two-parameter foundations -- named like this because they have the second parameter which introduces interactions between adjacent springs, in addition to the first parameter from the ordinary Winkler’s model. This class of models includes Filonenko-Borodich, Pasternak, generalized, and Vlasov foundations. Mathematically, the equations to describe the reaction of the two-parameter foundations arc equilibrium ones, and the only difference is the definition of the parameters. For the convenience of discussion, the Pasternak foundation is adopted in present paper. In order to analyse the bending behavior of a Euler-Bernoulli beam resting on two-parameter elastic foundation a (displacement Finite Element (FE formulation, based on the cubic displacement function of the governing differential equation, is introduced. The resulting effects of shear stiffness of the Pasternak model on the mechanical quantities are discussed in comparison with those of the Winkler’s model. Some numerical case studies illustrate the accuracy of the formulation and the importance of the soil shearing effect in the vertical direction, associated with continuous elastic foundation.

  11. Determination of p-y Curves for Bucket Foundations in Sand Using Finite Element Modeling

    OpenAIRE

    Knudsen, Bjørn S.; Østergaard, Martin Underlin; Ibsen, Lars Bo; Clausen, Johan

    2013-01-01

    Cylindrical offshore wind turbine foundations, such as bucket foundations and monopiles, have up till now been designed using analytical methods based on experiments done with piles much more slender than the ones used in today’s industry. Compared to the widely used monopile foundation, the suction bucket has a much smaller ratio between length and diameter, and the suction buckets will thus act more as a rigid object during rotation in the soil. To improve the design of suction buckets thro...

  12. Foundational Elements of Applied Simulation Theory: Development and Implementation of a Longitudinal Simulation Educator Curriculum

    Science.gov (United States)

    Posner, Glenn; Humphrey-Murto, Susan

    2017-01-01

    Simulation-based education has gained popularity, yet many faculty members feel inadequately prepared to teach using this technique. Fellowship training in medical education exists, but there is little information regarding simulation or formal educational programs therein. In our institution, simulation fellowships were offered by individual clinical departments. We recognized the need for a formal curriculum in educational theory. Kern’s approach to curriculum development was used to develop, implement, and evaluate the Foundational Elements of Applied Simulation Theory (FEAST) curriculum. Needs assessments resulted in a 26-topic curriculum; each biweekly session built upon the previous. Components essential to success included setting goals and objectives for each interactive session and having dedicated faculty, collaborative leadership and administrative support for the curriculum. Evaluation data was collated and analyzed annually via anonymous feedback surveys, focus groups, and retrospective pre-post self-assessment questionnaires. Data collected from 32 fellows over five years of implementation showed that the curriculum improved knowledge, challenged thinking, and was excellent preparation for a career in simulation-based medical education. Themes arising from focus groups demonstrated that participants valued faculty expertise and the structure, practicality, and content of the curriculum. We present a longitudinal simulation educator curriculum that adheres to a well-described framework of curriculum development. Program evaluation shows that FEAST has increased participant knowledge in key areas relevant to simulation-based education and that the curriculum has been successful in meeting the needs of novice simulation educators. Insights and practice points are offered for educators wishing to implement a similar curriculum in their institution. PMID:28280655

  13. Foundational Elements of Applied Simulation Theory: Development and Implementation of a Longitudinal Simulation Educator Curriculum.

    Science.gov (United States)

    Chiu, Michelle; Posner, Glenn; Humphrey-Murto, Susan

    2017-01-27

    Simulation-based education has gained popularity, yet many faculty members feel inadequately prepared to teach using this technique. Fellowship training in medical education exists, but there is little information regarding simulation or formal educational programs therein. In our institution, simulation fellowships were offered by individual clinical departments. We recognized the need for a formal curriculum in educational theory. Kern's approach to curriculum development was used to develop, implement, and evaluate the Foundational Elements of Applied Simulation Theory (FEAST) curriculum. Needs assessments resulted in a 26-topic curriculum; each biweekly session built upon the previous. Components essential to success included setting goals and objectives for each interactive session and having dedicated faculty, collaborative leadership and administrative support for the curriculum. Evaluation data was collated and analyzed annually via anonymous feedback surveys, focus groups, and retrospective pre-post self-assessment questionnaires. Data collected from 32 fellows over five years of implementation showed that the curriculum improved knowledge, challenged thinking, and was excellent preparation for a career in simulation-based medical education. Themes arising from focus groups demonstrated that participants valued faculty expertise and the structure, practicality, and content of the curriculum. We present a longitudinal simulation educator curriculum that adheres to a well-described framework of curriculum development. Program evaluation shows that FEAST has increased participant knowledge in key areas relevant to simulation-based education and that the curriculum has been successful in meeting the needs of novice simulation educators. Insights and practice points are offered for educators wishing to implement a similar curriculum in their institution.

  14. Human Robotic Systems (HRS): Robonaut 2 Technologies Element

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of the Robonaut 2 (R2) Technology Project Element within Human Robotic Systems (HRS) is to developed advanced technologies for infusion into the Robonaut 2...

  15. The Dynamic Response of an Euler-Bernoulli Beam on an Elastic Foundation by Finite Element Analysis using the Exact Stiffness Matrix

    Science.gov (United States)

    Kim, Jeong Soo; Kyum Kim, Moon

    2012-08-01

    In this study, finite element analysis of beam on elastic foundation, which received great attention of researchers due to its wide applications in engineering, is performed for estimating dynamic responses of shallow foundation using exact stiffness matrix. First, element stiffness matrix based on the closed solution of beam on elastic foundation is derived. Then, we performed static finite element analysis included exact stiffness matrix numerically, comparing results from the analysis with some exact analysis solutions well known for verification. Finally, dynamic finite element analysis is performed for a shallow foundation structure under rectangular pulse loading using trapezoidal method. The dynamic analysis results exist in the reasonable range comparing solution of single degree of freedom problem under a similar condition. The results show that finite element analysis using exact stiffness matrix is evaluated as a good tool of estimating the dynamic response of structures on elastic foundation.

  16. HAWCStab2 with super element foundations: A new tool for frequency analysis of offshore wind turbines

    DEFF Research Database (Denmark)

    Henriksen, Lars Christian; Hansen, Anders Melchior; Kragh, Knud Abildgaard

    HAWCStab2 is a linear frequency domain aero-elastic tool, developed by DTU Wind Energy, suitable for frequency and stability analysis of horizontal axis 3 bladed wind turbines [1]. This tool has now been extended to also handle complex offshore foundation types, such as jacket structures and floa......HAWCStab2 is a linear frequency domain aero-elastic tool, developed by DTU Wind Energy, suitable for frequency and stability analysis of horizontal axis 3 bladed wind turbines [1]. This tool has now been extended to also handle complex offshore foundation types, such as jacket structures...

  17. Next Generation Astronomical Data Processing using Big Data Technologies from the Apache Software Foundation

    Science.gov (United States)

    Mattmann, Chris

    2014-04-01

    In this era of exascale instruments for astronomy we must naturally develop next generation capabilities for the unprecedented data volume and velocity that will arrive due to the veracity of these ground-based sensor and observatories. Integrating scientific algorithms stewarded by scientific groups unobtrusively and rapidly; intelligently selecting data movement technologies; making use of cloud computing for storage and processing; and automatically extracting text and metadata and science from any type of file are all needed capabilities in this exciting time. Our group at NASA JPL has promoted the use of open source data management technologies available from the Apache Software Foundation (ASF) in pursuit of constructing next generation data management and processing systems for astronomical instruments including the Expanded Very Large Array (EVLA) in Socorro, NM and the Atacama Large Milimetre/Sub Milimetre Array (ALMA); as well as for the KAT-7 project led by SKA South Africa as a precursor to the full MeerKAT telescope. In addition we are funded currently by the National Science Foundation in the US to work with MIT Haystack Observatory and the University of Cambridge in the UK to construct a Radio Array of Portable Interferometric Devices (RAPID) that will undoubtedly draw from the rich technology advances underway. NASA JPL is investing in a strategic initiative for Big Data that is pulling in these capabilities and technologies for astronomical instruments and also for Earth science remote sensing. In this talk I will describe the above collaborative efforts underway and point to solutions in open source from the Apache Software Foundation that can be deployed and used today and that are already bringing our teams and projects benefits. I will describe how others can take advantage of our experience and point towards future application and contribution of these tools.

  18. Justification of parameters and selection of equipment for laboratory researches of a rammer's operating element dynamics in a soil foundation of a tank for oil and oil products storage

    Science.gov (United States)

    Gruzin, A. V.; Gruzin, V. V.; Shalay, V. V.

    2017-08-01

    The development of technology for a directional soil compaction of tank foundations for oil and oil products storage is a relevant problem which solution will enable simultaneously provide required operational characteristics of a soil foundation and reduce time and material costs to prepare the foundation. The impact dynamics of rammers' operating elements on the soil foundation is planned to specify in the course of laboratory studies. A specialized technique is developed to justify the parameters and select the equipment for laboratory researches. The usage of this technique enabled us to calculate dimensions of the models, of a test bench and specifications of the recording equipment, and a lighting system. The necessary equipment for laboratory studies was selected. Preliminary laboratory tests were carried out. The estimate of accuracy for planned laboratory studies was given.

  19. Exploring the foundations of population health and preventive medicine as essential elements for veterinary education.

    Science.gov (United States)

    Hooper, Billy E

    2008-09-15

    The evolution of preventive medicine and public health training in professional veterinary medicine curricula is documented. Most veterinary colleges in the US began with a single course in meat hygiene or public health, with a focus on food hygiene issues. These courses laid the foundation for modern veterinary preventive medicine and public health training for veterinary students. Most graduates of veterinary colleges today have extensive training in population health, preventive medicine, and zoonotic diseases.

  20. Research Development of MOX Fuel Element Technology

    Institute of Scientific and Technical Information of China (English)

    YANG; Qi-fa; YANG; Ting-gui; SHANG; Gai-bin; YIN; Bang-yue; ZHOU; Guo-liang; LI; Qiang; JIANG; Bao-jun

    2015-01-01

    The project of"MOX Fuel Element Research"led by China Institute of Atomic Energy,404Company Ltd.and CNPE Zhengzhou Branch are members of the project research team.The research task of 2015had been accomplished successfully,and the research productions of this year build up a basis for the future research,also

  1. Technology Status of Thermionic Fuel Elements for Space Nuclear Power

    Science.gov (United States)

    Holland, J. W.; Yang, L.

    1984-01-01

    Thermionic reactor power systems are discussed with respect to their suitability for space missions. The technology status of thermionic emitters and sheath insulator assemblies is described along with testing of the thermionic fuel elements.

  2. The Foundation for Application of Multi-Agent Technology In a Holonic Shop Floor Control Architecture

    DEFF Research Database (Denmark)

    Langer, Gilad; Bilberg, Arne

    1997-01-01

    control. The work is based on a theoretical study of new manufacturing systems theories, research of agent multi-agent technology, and two case studies. It is part of a larger research project which aims at developing a multi-cell control architecture based on the Holonic Manufacturing System theory.......The emerging theory regarding Holonic Manufacturing Systems (HMS) presents a advantageous theoretical foundation for the control system of the manufacturing system of the future. Previous research, at the Department, has demonstrated how company tailored shop floor control can be developed...... by applying simulation and cell control enabling technologies. In order to continue this research effort new concepts and theories for shop floor control are investigated. This article presents an overview of the multi-agent concept based on a literature study. This is followed by an investigation regarding...

  3. Taking Part in Technology Education: Elements in Students' Motivation

    Science.gov (United States)

    Autio, Ossi; Hietanoro, Jenni; Ruismaki, Heikki

    2011-01-01

    The purpose of this study was to determine the elements motivating comprehensive school students to study technology education. In addition, we tried to discover how students' motivation towards technology education developed over the period leading up to their school experience and the effect this might have on their future involvement with…

  4. 桥梁桩基施工技术探析%Analysis of the Bridge Pile Foundation Construction Technology

    Institute of Scientific and Technical Information of China (English)

    金永亮

    2014-01-01

    The foundation of bridge construction is the pile foundation construction. In the process of pile foundation con-struction, the col apse hole, broken pile and other quality prob-lems are easily occur. This article through the introduction of bridge pile foundation construction technology to summarize the main technical points of pile foundation construction of ea-ch link.%桥梁施工的基础是桩基施工,在桩基的施工过程中,容易出现塌孔、断桩等质量问题。本文通过对桥梁桩基施工工艺的介绍,总结了桩基施工各个环节的技术要点。

  5. An evaluation of UK foundation trainee doctors' learning behaviours in a technology-enhanced learning environment.

    Science.gov (United States)

    Brooks, Hannah L; Pontefract, Sarah K; Hodson, James; Blackwell, Nicholas; Hughes, Elizabeth; Marriott, John F; Coleman, Jamie J

    2016-05-03

    Technology-Enhanced Learning (TEL) can be used to educate Foundation Programme trainee (F1 and F2) doctors. Despite the advantages of TEL, learning behaviours may be exhibited that are not desired by system developers or educators. The aim of this evaluation was to investigate how learner behaviours (e.g. time spent on task) were affected by temporal (e.g. time of year), module (e.g. word count), and individual (e.g. knowledge) factors for 16 mandatory TEL modules related to prescribing and therapeutics. Data were extracted from the SCRIPT e-Learning platform for first year Foundation trainee (F1) doctors in the Health Education England's West Midland region from 1(st) August 2013 to 5(th) August 2014. Generalised Estimating Equation models were used to examine the relationship between time taken to complete modules, date modules were completed, pre- and post-test scores, and module factors. Over the time period examined, 688 F1 doctors interacted with the 16 compulsory modules 10,255 times. The geometric mean time taken to complete a module was 28.9 min (95% Confidence Interval: 28.4-29.5) and 1,075 (10.5%) modules were completed in less than 10 min. In February and June (prior to F1 progression reviews) peaks occurred in the number of modules completed and troughs in the time taken. Most modules were completed, and the greatest amount of time was spent on the learning on a Sunday. More time was taken by those doctors with greater pre-test scores and those with larger improvements in test scores. Foundation trainees are exhibiting unintended learning behaviours in this TEL environment, which may be attributed to several factors. These findings can help guide future developments of this TEL programme and the integration of other TEL programmes into curricula by raising awareness of potential behavioural issues that may arise.

  6. Instability of Bucket Foundations during Installation

    DEFF Research Database (Denmark)

    Madsen, Søren; Andersen, Lars Vabbersgaard; Ibsen, Lars Bo

    The bucket foundation is an upcoming technology for offshore wind turbines. The bucket foundation is a large cylindrical monopod foundation constructed as a thin steel shell structure. A bucket foundation does not require heavy installation equipment since it is installed by suction forces....... The combination of a thin shell structure and suction forces leads to the fact that instability, in form of buckling, becomes a crucial issue during installation. The hydrostatic buckling pressure of the bucket foundation is addressed using three-dimensional, non-linear finite element analysis. The results...

  7. Engaged, embedded, enjoined: science and technology studies in the National Science Foundation.

    Science.gov (United States)

    Hackett, Edward J; Rhoten, Diana R

    2011-12-01

    Engaged scholarship is an intellectual movement sweeping across higher education, not only in the social and behavioral sciences but also in fields of natural science and engineering. It is predicated on the idea that major advances in knowledge will transpire when scholars, while pursuing their research interests, also consider addressing the core problems confronting society. For a workable engaged agenda in science and technology studies, one that informs scholarship as well as shapes practice and policy, the traditional terms of engagement must be renegotiated to be more open and mutual than has historically characterized the nature of inquiry in this field. At the same time, it is essential to protect individual privacy and preserve government confidentiality. Yet there is a scientific possibility for and benefit to introducing more collaborative and deliberative research approaches between scholar and subject in ways that will not violate these first-order ethics. To make the case, this article discusses the possibilities and perils of engaged science and technology scholarship by drawing on our own recent experiences to conduct and apply STS research while embedded in the National Science Foundation. Brief accounts of these experiences reveal the opportunities as well as the challenges of engaged scholarship. They also provide lessons for those fellow travelers who might follow the authors to this or other like host organizations with ambitions of increasing fundamental knowledge about and applying research to the policies, programs, and decisions of the scientific enterprise.

  8. Underground Parking structure built with deep foundations and vault precast elements in Spain

    Directory of Open Access Journals (Sweden)

    Fernández-Ordóñez, D.

    2012-09-01

    Full Text Available In many cases the only places available for the construction of a new car park are the existing streets or roads. These streets may also have important or historic buildings very close to the structure, which means that they cannot be disturbed in any way during the construction of the parking structure. In this particular case, the novelty is that the top deck is solved with a unique structure: a vault that interacts with the pile wall not only for vertical but also for horizontal loads due to the arch mechanism. The construction of the vault is solved as a large precast element of one piece of more than 16 in length and 2.40m in width, which is built in the factory, transported with the help of trucks and erected on site with large cranes.

    En muchos casos las únicas localizaciones para construir aparcamientos son las calles o carreteras. Estas calles también suelen tener alrededor importantes edificios históricos muy cercanos a la propia estructura. En este caso particular la novedad reside en que el forjado superior está resuelto con una estructura especial: una bóveda que interacciona con la pantalla de pilotes no solo en el sentido vertical sino también en el horizontal formando un verdadero mecanismo de arco. La construcción de la bóveda se ha resuelto con grandes elementos prefabricados de una pieza de más de 16m de longitud y de 2,40m de ancho. Se han fabricado en una factoría, transportados y montados en obra con grandes grúas.

  9. FOUNDATION ANALYSIS OF UPPER TUNGA PROJECT AT GAJANUR, SHIMOGA DISTRICT, KARNATAKA

    OpenAIRE

    Dr. N. Venkatesh

    2017-01-01

    The foundation Engineering technology concerns the dual problem of soil bearing capacity and the design for construction of the foundation. The stability of the soil foundation system depends not only on the strength of the foundation proper as an artificial construction element but also on the strength of the soil or rock beneath the foundation, soil exploration, soil testing, determination of soil bearing capacity, it consist of the dam foundation analysis and included as part of the calcul...

  10. Estimation of Heights of Soil Plug Inside Bucket Foundations During Suction Penetration by Deformable Discrete Element Modeling

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The soil plug phenomenon involving the rising of the surface soil inside the bucket chamber under the suction pressure and seepage forces was simulated and calculated by deformable discrete element method (DDEM) models. The seepage forces, the effective gravity of soil, the friction on the chamber wall and the suction inside the chamber are considered as the main external forces of DDEM specimen. Three typical types of soil (silty clay, silt and sand) in the Bohai Sea are set as the main environmental conditions in the formation process of soil plug. It is found that the heights of soil plug simulated by DDEM models are 161.85 mm in silty clay, 125.22 mm in silt and 167.56 mm in sand, which are close to model test results and higher than those estimated by discrete element method (DEM). DDEM is an effective method to estimate and predict the heights of soil plug before suction penetration of bucket foundations on site.

  11. 基础反梁钢筋施工技术%Construction Technology of Foundation Anti-beam Reinforcing Steel

    Institute of Scientific and Technical Information of China (English)

    李礼春

    2014-01-01

    该文根据实际施工经验,概述了基础反梁钢筋施工技术。%According to the actual construction experience,this paper introduces construction technology of founda-tion anti-beam reinforcing steel.

  12. 26th Annual GCSSEPM Foundation Bob F.Perkins Research Conference on "Reservoir characterization:integrating technology and business practices"

    Institute of Scientific and Technical Information of China (English)

    Roger M. Slatt

    2007-01-01

    @@ The 2006 26th Annual GCSSEPM Foundation Bob F. Perkins Research Conference on "Reservoir characterization: Integrating technology and business practices" presented a solid testimonial to how far we have advanced in the technologies and practices of reservoir characterization since the 1990 AAPG-SEG-SPE-SPWLA 1st Archie Conference on "Integration of Geology, Geophysics, Petrophysics, and Petroleum Engineering in Reservoir Delineation, Description and Management".

  13. Anatomical sciences: A foundation for a solid learning experience in dental technology and dental prosthetics.

    Science.gov (United States)

    Bakr, Mahmoud M; Thompson, C Mark; Massadiq, Magdalena

    2016-09-01

    Basic science courses are extremely important as a foundation for scaffolding knowledge and then applying it in future courses, clinical situations as well as in a professional career. Anatomical sciences, which include tooth morphology, oral histology, oral embryology, and head and neck anatomy form a core part of the preclinical courses in dental technology programs. In this article, the importance and relevance of anatomical sciences to dental personnel with no direct contact with patients (dental technicians) and limited discipline related contact with patients (dental prosthetists) is highlighted. Some light is shed on the role of anatomical sciences in the pedagogical framework and its significance in the educational process and interprofessional learning of dental technicians and prosthetists using oral biology as an example in the dental curriculum. To conclude, anatomical sciences allow dental technicians and prosthetists to a gain a better insight of how tissues function, leading to a better understanding of diagnosis, comprehensive treatment planning and referrals if needed. Patient communication and satisfaction also increases as a result of this deep understanding of oral tissues. Anatomical sciences bridge the gap between basic science, preclinical, and clinical courses, which leads to a holistic approach in patient management. Finally, treatment outcomes are positively affected due to the appreciation of the macro and micro structure of oral tissues. Anat Sci Educ. © 2016 American Association of Anatomists.

  14. Applied Foundations

    DEFF Research Database (Denmark)

    Kohlenbach, Ulrich

    2002-01-01

    A central theme in the foundations of mathematics, dating back to D. Hilbert, can be paraphrased by the following question "How is it that abstract methods (`ideal elements´) can be used to prove `real´ statements e.g. about the natural numbers and is this use necessary in principle?"...

  15. Technology Solutions Case Study: Innovative Retrofit Foundation Insulation Strategies, Minneapolis, Minnesota

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-07-01

    Basements in climates 6 & 7 can account for a fraction of a home's total heat loss when fully conditioned. These foundations are a source of moisture, with convection in open block cavities redistributing water from the wall base, usually when heating. Even when block cavities are capped, the cold foundation concrete can act as a moisture source for wood rim joist components that are in contact with the wall. As below-grade basements are increasingly retrofitted for habitable space, cold foundation walls pose increased challenges for moisture durability, energy use, and occupant comfort. To address this challenge, the NorthernSTAR Building America Partnership evaluated a retrofit insulation strategy for foundations that is designed for use with open-core concrete block foundation walls. The three main goals were to improve moisture control, improve occupant comfort, and reduce heat loss.

  16. Construction technology on pile foundation of No. 6 main pier in Dashengguan Yangtze Bridge

    Institute of Scientific and Technical Information of China (English)

    Hongbin YU; Zeping LIAN

    2009-01-01

    Based on pile foundation construction of No. 6 main pier, deep mudstone geological foundation and deep-water construction in Nanjing-Dashengguan Yangtze Bridge, the method of super-large-diameter bored pile in deep water is studied. The spread drill, application of PHP mud, and choice of machine are solved by adopting two machines of KTY4000 and KPG300A. Besides, the airlift reversing circulation is selected in slag discharge. The results show that this method can ensure successfully the construction of pier foundation to satisfy the demands of codes.

  17. The concrete technology of post pouring zone of raft foundation of Hongyun Building B tower

    Science.gov (United States)

    Yin, Suhua; Yu, Liu; Wu, Yanli; Zhao, Ying

    2017-08-01

    The foundation of Hongyun building B tower is made of raft board foundation which is 3300mm in the thickness concreted pouring amount of large and the late poured band in the pouring settlement formed. The temperature of the pouring settlement was controlled in order to prevent the crack of the construction of the late poured band. The steel of post pouring band was designed and monitorred. The quality of post pouring band quality is guaranteed in the raft concrete foundation of Hongyun Building B tower.

  18. Technology Solutions Case Study: Interior Foundation Insulation Upgrade-Minneapolis Residence

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-10-01

    This interior foundation project employed several techniques to improve performance and mitigate moisture issues: dimple mat; spray polyurethane foam insulation; moisture and thermal management systems for the floor; and paperless gypsum board and steel framing.

  19. Improving boiler foundation bolt installation technology%提高锅炉地脚螺栓安装工艺

    Institute of Scientific and Technical Information of China (English)

    李晓峰

    2014-01-01

    阐述了锅炉地脚螺栓安装前的准备工作,通过对螺栓安装施工工艺流程的介绍,分析了提高螺栓与螺栓支架安装精度的方法,并对检验螺栓安装质量的技术要点作了研究,以确保锅炉地脚螺栓安装的正确无误。%The paper illustrates boiler foundation bolt installation preparations. Through introducing bolt installation technology procedures, it analyzes methods of improving bolt and bolt support installation accuracy, and studies technological points of examining bolt installation quality, with a view to guarantee boiler foundation bolt installation correct.

  20. Determination of p-y Curves for Bucket Foundations in Silt and Sand Using Finite Element Modelling

    DEFF Research Database (Denmark)

    Vethanayagam, Vinojan; Ibsen, Lars Bo

    Design of offshore wind turbine foundations are today based on analytical formulas, which describes the link between a displacement, y, and the associated soil pressure, p. The formulas are empirically developed on slender piles with a slenderness ratio L=D > 30, but foundations of today are less...

  1. Discussion on the Construction of Deep Foundation Pit Construction Technology%建筑施工中深基坑施工技术探讨

    Institute of Scientific and Technical Information of China (English)

    陈江树

    2015-01-01

    This paper studies the application of deep foundation pit construction technology in our country at present, the foundation of deep foundation pit construction is analyzed, and the main points of deep foundation pit construction technology are discussed.%对我国现阶段深基坑施工技术应用现状进行了研究,对深基坑施工基础进行了分析,论述了深基坑施工技术的要点。

  2. Foundational Methane Propulsion Related Technology Efforts, and Challenges for Applications to Human Exploration Beyond Earth Orbit

    Science.gov (United States)

    Brown, Thomas; Klem, Mark; McRight, Patrick

    2016-01-01

    Current interest in human exploration beyond earth orbit is driving requirements for high performance, long duration space transportation capabilities. Continued advancement in photovoltaic power systems and investments in high performance electric propulsion promise to enable solar electric options for cargo delivery and pre-deployment of operational architecture elements. However, higher thrust options are required for human in-space transportation as well as planetary descent and ascent functions. While high thrust requirements for interplanetary transportation may be provided by chemical or nuclear thermal propulsion systems, planetary descent and ascent systems are limited to chemical solutions due to their higher thrust to weight and potential planetary protection concerns. Liquid hydrogen fueled systems provide high specific impulse, but pose challenges due to low propellant density and the thermal issues of long term propellant storage. Liquid methane fueled propulsion is a promising compromise with lower specific impulse, higher bulk propellant density and compatibility with proposed in-situ propellant production concepts. Additionally, some architecture studies have identified the potential for commonality between interplanetary and descent/ascent propulsion solutions using liquid methane (LCH4) and liquid oxygen (LOX) propellants. These commonalities may lead to reduced overall development costs and more affordable exploration architectures. With this increased interest, it is critical to understand the current state of LOX/LCH4 propulsion technology and the remaining challenges to its application to beyond earth orbit human exploration. This paper provides a survey of NASA's past and current methane propulsion related technology efforts, assesses the accomplishments to date, and examines the remaining risks associated with full scale development.

  3. THREE-DIMENSIONAL FINITE-ELEMENT SIMULATION OF STRETCHING TECHNOLOGICAL PARAMETERS bt/h AND bb/h OF HEAVY FORGINGS

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A three-dimensional finite-element simulation of stretching technological parameters of heavy forgings is performed by using ANSYS program. The law of internal stress distribution with different bt/h (tool width ratio) and different bb/h (blank width ratio) is studied. Consequently, the critical tool width ratio( bt/h )cr and blank width ratio( bb/h )cr leading no bi-axial tension are obtained. It lays a credible foundation for designing reasonable stretching technology.

  4. The element technology of clean fuel alcohol plant construction

    Energy Technology Data Exchange (ETDEWEB)

    Lee, D.S; Lee, D.S. [Sam-Sung Engineering Technical Institute (Korea, Republic of); Choi, C.Y [Seoul National University, Seoul (Korea, Republic of)] [and others

    1996-02-01

    The fuel alcohol has been highlighted as a clean energy among new renewable energy sources. However, the production of the fuel alcohol has following problems; (i)bulk distillate remains is generated and (ii) benzene to be used as a entertainer in the azeotropic distillation causes the environmental problem. Thus, we started this research on the ground of preserving the cleanness in the production of fuel alcohol, a clean energy. We examined the schemes of replacing the azotropic distillation column which causes the problems with MSDP(Molecular Sieve Dehydration Process) system using adsorption technology and of treating the bulk distillate remains to be generated as by-products. In addition, we need to develop the continuous yea station technology for the continuous operation of fuel alcohol plant as a side goal. Thus, we try to develop a continuous ethanol fermentation process by high-density cell culture from tapioca, a industrial substrate, using cohesive yeast. For this purpose, we intend to examine the problem of tapioca, a industrial substrate, where a solid is existed and develop a new process which can solve the problem. Ultimately, the object of this project is to develop each element technology for the construction of fuel alcohol plant and obtain the ability to design the whole plant. (author) 54 refs., 143 figs., 34 tabs.

  5. 深基坑支护施工技术在基础施工中的应用分析%The Application Analysis of Deep Foundation Pit Support Construction Technology in Foundation Construction

    Institute of Scientific and Technical Information of China (English)

    赵素艳

    2014-01-01

    The construction technology of deep foundation pit is a very important technology in foundation construction, thr-ough the investigation of the site geological conditions and ge-ographical environment, this paper puts forward some impor-tant application procedures and announcements protection mo-de of deep foundation pit construction, can make the applica-tion of deep foundation pit supporting construction technology in foundation construction more clearly.%深基坑支护施工技术在基础施工建设中是非常重要的技术,本文通过对现场地质条件和地理环境的调查,提出深基坑建设一些重要的应用程序和注意事项的保护模式,可以使基础施工的深基坑支护施工技术应用更清晰。

  6. EXPERIMENTAL AND THEORETICAL FOUNDATIONS AND PRACTICAL IMPLEMENTATION OF TECHNOLOGY BRAIN-COMPUTER INTERFACE

    Directory of Open Access Journals (Sweden)

    A. Ya. Kaplan

    2013-01-01

    Full Text Available Technology brain-computer interface (BCI allow saperson to learn how to control external devices via thevoluntary regulation of own EEG directly from the brain without the involvement in the process of nerves and muscles. At the beginning the main goal of BCI was to replace or restore motor function to people disabled by neuromuscular disorders. Currently, the task of designing the BCI increased significantly, more capturing different aspects of life a healthy person. This article discusses the theoretical, experimental and technological base of BCI development and systematized critical fields of real implementation of these technologies.

  7. EXPERIMENTAL AND THEORETICAL FOUNDATIONS AND PRACTICAL IMPLEMENTATION OF TECHNOLOGY BRAIN-COMPUTER INTERFACE

    National Research Council Canada - National Science Library

    A. Ya. Kaplan; A. G. Kochetova; S. L. Shishkin; I. A. Basyul; I. P. Ganin; A. N. Vasilev; S. P. Liburkina

    2013-01-01

    Technology brain-computer interface (BCI) allow saperson to learn how to control external devices via thevoluntary regulation of own EEG directly from the brain without the involvement in the process of nerves and muscles...

  8. 加强房屋建筑地基施工技术的分析%Analysis on strengthening housing building foundation construction technology

    Institute of Scientific and Technical Information of China (English)

    沈俊桥

    2016-01-01

    分析了房屋建筑地基施工的必要性,阐述了地基施工过程中的基本要求,从基础选择、加固作业、静压桩处理等方面,提出了加强房屋建筑地基施工技术的措施,以有效提高房屋建筑的地基承载力,保证建筑工程质量。%The paper analyzes the necessity of housing building foundation construction,describes basis foundation construction,and puts forward measures of strengthening housing building foundation construction technology from aspects of foundation selection,reinforcement,and static pile treatment,with a view to effectively improve housing building foundation bearing capacity and to guarantee building engineering quality as well.

  9. 地基处理技术在房屋建筑施工中的运用%Application of Foundation Treatment Technology in Housing Construction

    Institute of Scientific and Technical Information of China (English)

    周守鹏

    2015-01-01

    作为房屋建筑施工质量的基础保障,地基处理在现阶段仍未取得良好的效果。主要对房屋建筑施工地基处理基本概述、常见地基处理技术以及现代施工中采用的地基处理新方法进行了探析。%As the foundation for the construction quality of housing construction, the foundation treatment has not achieved good effect at this stage. This paper mainly on the building foundation treatment of building foundation, common ground treatment technology and the modern construction of the foundation treatment method of new method.

  10. [Medico-prophylactic foundations of the safety of information and communication technologies used in educational institutions].

    Science.gov (United States)

    Baranov, A A; Kuchma, V R; Sukhareva, L M; Stepanova, M I; Teksheva, L M

    2011-01-01

    The problems pertaining to the safety of information and communication technologies used in the spheres of education and leisure activities of children and adolescents are discussed. The relevant risk factors are identified. Results of physiological and hygienic studies for substantiating regulations of continuous work with a personal computer are presented taking into account the children's age and hygienic requirements to electronic teaching aids.

  11. 桩基承载能力的有限元分析%Finite Element Analysis of Bearing Capacity of Pile Foundation

    Institute of Scientific and Technical Information of China (English)

    彭银辉; 吕世斌; 耿立伟

    2012-01-01

    针对工程实例,利用ABAQUS有限元软件建立单桩承载力的有限元计算模型,研究桩基承载特性,并与桩基静载试验所得实测数据比较。结果表明,模拟计算结果与工程实际基本吻合,说明采用的计算方法和模型是合理可行的。同时研究了在不同桩土界面摩擦系数条件下桩的沉降和轴向力变化情况,为不同工程地质条件的桩基设计提供参考。%On account of practical case,finite element calculation model of single pile bearing capacity is established with ABAQUS to study the bearing characteristics of pile foundation and compare with actual measurement data of static loading test of pile foundation.The result shows that simulated calculation result is basically consistent with actual engineering,which indicates that the adopted calculation method and model are reasonable and feasible.Meanwhile,the change of settlement and axial force of pile under different frictional coefficient of pile soil is studied,providing references for pile foundation design in different engineering geological conditions.

  12. 预埋塔筒式风塔基础的有限元分析%Finite Element Analysis of Tower Wind Tower Foundation Embedded Cylindrical

    Institute of Scientific and Technical Information of China (English)

    杨涛; 黄冬平

    2012-01-01

    利用ANSYS有限元软件对预埋塔筒式风塔基础结构进行了模拟计算与分析,重点剖析容易导致风机基础破坏的强度和刚度薄弱环节.由ANSYS计算结果分析了由于预埋塔筒较浅引起的混凝土的应力变化,及在塔筒结束处应力转向钢筋的过程.从而为工程设计提出建议,避免设计中的安全隐患导致风机基础破坏事故.%Simulation and analysis using ANSYS finite element software of embedded cylindrical tower wind tower foundation were made, the focus of analysis is strength and stiffness of weak links which easily lead to the destruction of wind turbine foundation, the stress of the concrete due to the embedded tower shallow was analyzed according to the, ANSYS calculation analysis results, and the process which the stress turned to the reinforcement at the end of the tower were also analyzed. Recommendations for engineering design were pointed out, to avoid security risks in the design led to the turbine foundation damage accidents.

  13. Sympathetic Resonance Technology: scientific foundation and summary of biologic and clinical studies.

    Science.gov (United States)

    Rubik, Beverly

    2002-12-01

    Sympathetic Resonance Technology (SRT; Clarus Products, International, L.L.C., San Rafael, CA) is a novel technology used in consumer health care products to protect humans from the potentially harmful effects of stress. A summary of the previously unpublished studies on SRT, both basic and clinical, is presented. These studies collectively show that SRT mitigates the stress response for a variety of stressors such as chemical and electromagnetic stress in various biologic systems and multiple levels of organization, ranging from the molecular to the behavioral. A rudimentary model of how SRT may work at the level of the biofield, the endogenous electromagnetic field of the organism, is proposed. By interacting with key component frequencies in the biofield, SRT may stabilize the organism homeodynamically, thereby protecting it from the effects of stressful stimuli.

  14. Historical review of clinical vaccine studies at Oswaldo Cruz Institute and Oswaldo Cruz Foundation - technological development issues

    Directory of Open Access Journals (Sweden)

    Reinaldo de Menezes Martins

    2015-02-01

    Full Text Available This paper presents, from the perspective of technological development and production, the results of an investigation examining 61 clinical studies with vaccines conducted in Brazil between 1938-2013, with the participation of the Oswaldo Cruz Institute (IOC and the Oswaldo Cruz Foundation (Fiocruz. These studies have been identified and reviewed according to criteria, such as the kind of vaccine (viral, bacterial, parasitic, their rationale, design and methodological strategies. The results indicate that IOC and Fiocruz have accumulated along this time significant knowledge and experience for the performance of studies in all clinical phases and are prepared for the development of new vaccines products and processes. We recommend national policy strategies to overcome existing regulatory and financing constraints.

  15. Establishment of Foundation for Export of Korean Environmental Assessment Technology through IAEA International Radioecology Project(EMRAS)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Han Soo; Choi, Y. H.; Keum, D. K.; Kang, H. S.; Suh, K. S.; Choi, H. J.; Lee, C. W

    2005-08-15

    This study was performed to obtain the international verification of Korea developed assessment code and experimental data on radioecology through the participation of EMRAS joint research program of IAEA, and consequently to establish the export foundation of the related technologies. The work scope includes 1) the provision of Korean experimental data and the verification of tritium assessment codes within Tritium Working Group, 2) the verification of Korean experimental data to be included in IAEA TRS364 Revision Group, and 3) the collection of information on other Working Groups activities. Major results comprise the comparison of model predictions between 12 organizations for Korean soybean scenario (to be published in IAEA TECDOC), and the verification of data (the interception factor for foliar contamination by dry(wet) deposition, weathering loss rate and translocation factor) submitted by update IAEA TRS364.

  16. 有限元数值模拟分析采空区地基稳定性%On goaf foundation stability with finite element numeric simulation analysis

    Institute of Scientific and Technical Information of China (English)

    张德鹏

    2015-01-01

    基于开采沉陷的理论特征及规律,应用有限元模拟方法研究了采空区地基的稳定性,根据采空区实际情况,将某煤矿采空区剖面抽象为平面应变模型,以有限元模拟软件GeoStudio为工具进行模拟计算,研究了其应力应变规律和影响采空区地基稳定性的主要因素。%Based on the theoretic features and laws for the exploitation settlement,the paper adopts the finite element simulation methods to adopt the stability of the goaf foundation,regards the profile of the goaf of some coal mine as the plain strain model,undertakes the simulation calcula-tion by taking the finite element simulation software GeoStudio as the tool,and researches its strain law and main factors affecting the goaf founda-tion stability.

  17. Foundations & principles of distributed manufacturing elements of manufacturing networks, cyber-physical production systems and smart automation

    CERN Document Server

    Kühnle, Hermann

    2015-01-01

    The book presents a coherent description of distributed manufacturing, providing a solid base for further research on the subject as well as smart implementations in companies. It provides a guide for those researching and working in a range of fields, such as smart manufacturing, cloud computing, RFID tracking, distributed automation, cyber physical production and global design anywhere, manufacture anywhere solutions. Foundations & Principles of Distributed Manufacturing anticipates future advances in the fields of embedded systems, the Internet of Things and cyber physical systems, outlining how adopting these innovations could rapidly bring about improvements in key performance indicators, which could in turn generate competition pressure by rendering successful business models obsolete. In laying the groundwork for powerful theoretical models, high standards for the homogeneity and soundness of the suggested setups are applied. The book especially elaborates on the upcoming competition in online manu...

  18. Pile Foundation Construction Technology of Modern Construction Engineering%浅析现代建筑工程桩基工程施工技术

    Institute of Scientific and Technical Information of China (English)

    仵安东

    2014-01-01

    The quality of a construction has great relationship with the construction technology of pile foundation enginee- ring. To improve the pile foundation engineering technology and to ensure its quality can improve the level and quality of the overal construction. This paper gives a brief introduction on the pile foundation engineering construction technology of modern construction projects.%一项建筑施工质量的好坏,很大联系就在于桩基工程的施工技术。要对桩基工程的技术进行提高、保证其质量过关,可以提高整体建筑的水平和质量。本文就现代建筑工程桩基工程施工技术方面进行了简要的介绍。

  19. FOUNDATION OF THE RATIONAL LEVEL OF THE ORGANIZATIONAL AND TECHNOLOGICAL RELIABILITY IN CONSTRUCTION PROJECTS

    Directory of Open Access Journals (Sweden)

    MLODESTKY V. R.

    2015-09-01

    Full Text Available Statement of the problem. The main points of contractual obligations is their timely performance with ensuring the desired level of investments of the investment funds provided for in this contract. The longer the execution of the works under the contract, the higher the probability of violation of these terms. Analysis of construction projects over the past decade has shown that the situation has not changed significantly, according to [8] contemporary data on the construction of a number of objects from which it follows that the larger the object, and accordingly, the longer construction period, the more the actual deviation of the actual terms of the construction of the planned, up to 50...100% in some cases. The comparison of these data shows that the problem of ensuring reliable operation of the construction company on the stage of implementation of a specific project is relevant in the present time. Analysis of recent research. The analysis of researches in the field of the rational justification of organizational and technological reliability values shows that its range is in the range from 0.35 to 0.9, it indicates the absence of a reasoned approach to this issue. Of course, for a more reliable implementation of the plan one needs to have a certain amount of appropriate material and financial resources, but in the management process is another important resource that should be in possession of the subject of management this is information. The purpose and objectives of work. The aim of this work is the study of the rational level of organizational and technological reliability (OTR based on analysis of the need for this information. To achieve the goal of the article were set and solve the following tasks: - to establish the relationship between OTR and the right amount of information; - to determine the influence of the accuracy of determining the current state of the controlled parameter and the level of information; - to justify the

  20. WEB 2.0 SERVICES AS A TECHNOLOGICAL FOUNDATION OF A NETWORK PROJECT

    Directory of Open Access Journals (Sweden)

    Tatiana Ivanovna Kanyanina

    2015-02-01

    Full Text Available In the light of the requirements of the federal state educational standard increases the value of the network design based on the use of Web 2.0 services. The article outlines the range of technological challenges faced by the developer of the network project, such as the choice of the network platform of the project, design tools and tools for project results placement, project coordination and organization of communication lines, the choice of instruments for the promotion of the project on the Internet. The main attention is focused on the examples of network services that address these challenges, and describe their features. The authors rely on the specific network projects implemented in Nizhny Novgorod region. The paper analyzes the possible project’s network sites (network environment. The article gives a general description of each environment, marks its distinctive features, advantages and disadvantages. The article presents project tasks’ examples, designed on the basis of the variety of Web 2.0 services that functionally meet the requirements of a particular task, examples of services to represent the project products and to summarize its results. Attention is paid to the organization of the lines of communication of the project participants and organizers and to the role of network services in the project promotion on the Internet.

  1. ECONOMIC FOUNDATIONS OF THE ANGLO-SAXON ALLIANCE’S CONSOLIDATION AS A DOMINATING ELEMENT OF THE GLOBAL SOCIAL SYSTEM

    Directory of Open Access Journals (Sweden)

    Alexey N. Yeletsky

    2014-01-01

    Full Text Available The various aspects of economic interactions of the key Anglo-Saxon states are considered in the article. Commercial, financial, technological fundamentals ofthe collaboration and interdependenceof Anglo-Saxon countries are analyzed. The signifi cant role of the USA and Great Britain as leading centers of this leadingblock is emphasized. The particular attention is paid to the aspiration of the Anglo-Saxon alliance retain geo-economic andgeopolitical leadership under conditionsof strengthening trends of multipolarity

  2. Rigid + Flexible Envelope Technology of Metro Deep Foundation%地铁深基坑刚性+柔性围护技术

    Institute of Scientific and Technical Information of China (English)

    黎小辉; 熊柯

    2012-01-01

    Metro deep foundation pit is an important key technology of the metro deep foundation construction, the paper briefly introduces the metro deep pit rigid + flexible envelope technology, including envelop structure design and principles of the foundation pit option selection. Key construction techniques, as well as the measurement and monitoring of the building envelope structure are also introduced.%地铁深基坑围护是地铁深基坑施工的重要技术关键,文章简要介绍地铁深基坑刚性+柔性围护技术,包括基坑围护结构的设计及原则,基坑方案选择,关键施工工艺以及围护结构的监控测量。

  3. Dynamic Sliding Analysis of a Gravity Dam with Fluid-Structure-Foundation Interaction Using Finite Elements and Newmark's Sliding Block Analysis

    Science.gov (United States)

    Goldgruber, Markus; Shahriari, Shervin; Zenz, Gerald

    2015-11-01

    To reduce the natural hazard risks—due to, e.g., earthquake excitation—seismic safety assessments are carried out. Especially under severe loading, due to maximum credible or the so-called safety evaluation earthquake, critical infrastructure, as these are high dams, must not fail. However, under high loading local failure might be allowed as long as the entire structure does not collapse. Hence, for a dam, the loss of sliding stability during a short time period might be acceptable if the cumulative displacements after an event are below an acceptable value. This performance is not only valid for gravity dams but also for rock blocks as sliding is even more imminent in zones with higher seismic activity. Sliding modes cannot only occur in the dam-foundation contact, but also in sliding planes formed due to geological conditions. This work compares the qualitative possible and critical displacements for two methods, the well-known Newmark's sliding block analysis and a Fluid-Foundation-Structure Interaction simulation with the finite elements method. The results comparison of the maximum displacements at the end of the seismic event of the two methods depicts that for high friction angles, they are fairly close. For low friction angles, the results are differing more. The conclusion is that the commonly used Newmark's sliding block analysis and the finite elements simulation are only comparable for high friction angles, where this factor dominates the behaviour of the structure. Worth to mention is that the proposed simulation methods are also applicable to dynamic rock wedge problems and not only to dams.

  4. Coverage of Team Science by Public Information Officers: Content Analysis of Press Releases about the National Science Foundation Science and Technology Centers

    Science.gov (United States)

    Graube, Marita; Clark, Fiona; Illman, Deborah L.

    2010-01-01

    This study examines the content of press releases from the National Science Foundation (NSF) Science and Technology Centers (STCs) to determine how public information officers (PIOs) presented the outcomes of centers to journalists and the public. A total of 68 press releases were analyzed for type of news covered, visibility of centers and their…

  5. Human Robotic Systems (HRS): Robotic Technologies for Asteroid Missions Element

    Data.gov (United States)

    National Aeronautics and Space Administration — During 2014, the Robotic Technologies for Asteroid Missions activity has four tasks:Asteroid Retrieval Capture Mechanism Development and Testbed;Mission Operations...

  6. Advanced Manufacturing Technologies (AMT): Bulk Metallic Glass Element

    Data.gov (United States)

    National Aeronautics and Space Administration — The first major objective of the ‘Bulk Metallic Glasses (BMGs) for Space Applications’ project is to raise the technology readiness level dry lubricated,...

  7. Aesthetic Design as an Element of Service Innovation in New Technology-based Firms

    OpenAIRE

    Candi, Marina

    2008-01-01

    The goals of this thesis are to examine new technology-based firms’ use of aesthetic design as an element of service innovation and to explore potential relationships between aesthetic design and performance in this same context. There is a scarcity of research on aesthetic design as an element of service innovation, particularly in new technology-based firms. Because of this scarcity, a hybrid research strategy is appropriate and the empirical basis for this research encompasses multiple cas...

  8. Rational engineering of Geobacter sulfurreducens electron transfer components: a foundation for building improved Geobacter-based bioelectrochemical technologies

    Directory of Open Access Journals (Sweden)

    Joana M Dantas

    2015-07-01

    Full Text Available Multiheme cytochromes have been implicated in Geobacter sulfurreducens (Gs extracellular electron transfer (EET. These proteins are potential targets to improve EET and enhance bioremediation and electrical current production by Gs. However, the functional characterization of multiheme cytochromes is particularly complex due to the co-existence of several microstates in solution, connecting the fully reduced and fully oxidized states. Over the last decade, new strategies have been developed to characterize multiheme redox proteins functionally and structurally. These strategies were used to reveal the functional mechanism of Gs multiheme cytochromes and also to identify key residues in these proteins for EET. In previous studies, we set the foundations for enhancement of the EET abilities of Gs by characterizing a family of five triheme cytochromes (PpcA-E. These periplasmic cytochromes are implicated in electron transfer between the oxidative reactions of metabolism in the cytoplasm and the reduction of extracellular terminal electron acceptors at the cell’s outer surface. The results obtained suggested that PpcA can couple e-/H+ transfer, a property that might contribute to the proton electrochemical gradient across the cytoplasmic membrane for metabolic energy production. The structural and functional properties of PpcA were characterized in detail and used for rational design of a family of 23 single site PpcA mutants. In this review, we summarize the functional characterization of the native and mutant proteins. Mutants that retain the mechanistic features of PpcA and adopt preferential e-/H+ transfer pathways at lower reduction potential values compared to the wild-type protein were selected for in vivo studies as the best candidates to increase the electron transfer rate of Gs. For the first time Gs strains have been manipulated by the introduction of mutant forms of essential proteins with the aim to develop and improve

  9. Rational engineering of Geobacter sulfurreducens electron transfer components: a foundation for building improved Geobacter-based bioelectrochemical technologies.

    Science.gov (United States)

    Dantas, Joana M; Morgado, Leonor; Aklujkar, Muktak; Bruix, Marta; Londer, Yuri Y; Schiffer, Marianne; Pokkuluri, P Raj; Salgueiro, Carlos A

    2015-01-01

    Multiheme cytochromes have been implicated in Geobacter sulfurreducens extracellular electron transfer (EET). These proteins are potential targets to improve EET and enhance bioremediation and electrical current production by G. sulfurreducens. However, the functional characterization of multiheme cytochromes is particularly complex due to the co-existence of several microstates in solution, connecting the fully reduced and fully oxidized states. Over the last decade, new strategies have been developed to characterize multiheme redox proteins functionally and structurally. These strategies were used to reveal the functional mechanism of G. sulfurreducens multiheme cytochromes and also to identify key residues in these proteins for EET. In previous studies, we set the foundations for enhancement of the EET abilities of G. sulfurreducens by characterizing a family of five triheme cytochromes (PpcA-E). These periplasmic cytochromes are implicated in electron transfer between the oxidative reactions of metabolism in the cytoplasm and the reduction of extracellular terminal electron acceptors at the cell's outer surface. The results obtained suggested that PpcA can couple e(-)/H(+) transfer, a property that might contribute to the proton electrochemical gradient across the cytoplasmic membrane for metabolic energy production. The structural and functional properties of PpcA were characterized in detail and used for rational design of a family of 23 single site PpcA mutants. In this review, we summarize the functional characterization of the native and mutant proteins. Mutants that retain the mechanistic features of PpcA and adopt preferential e(-)/H(+) transfer pathways at lower reduction potential values compared to the wild-type protein were selected for in vivo studies as the best candidates to increase the electron transfer rate of G. sulfurreducens. For the first time G. sulfurreducens strains have been manipulated by the introduction of mutant forms of essential

  10. Rational engineering of Geobacter sulfurreducens electron transfer components: a foundation for building improved Geobacter-based bioelectrochemical technologies

    Science.gov (United States)

    Dantas, Joana M.; Morgado, Leonor; Aklujkar, Muktak; Bruix, Marta; Londer, Yuri Y.; Schiffer, Marianne; Pokkuluri, P. Raj; Salgueiro, Carlos A.

    2015-01-01

    Multiheme cytochromes have been implicated in Geobacter sulfurreducens extracellular electron transfer (EET). These proteins are potential targets to improve EET and enhance bioremediation and electrical current production by G. sulfurreducens. However, the functional characterization of multiheme cytochromes is particularly complex due to the co-existence of several microstates in solution, connecting the fully reduced and fully oxidized states. Over the last decade, new strategies have been developed to characterize multiheme redox proteins functionally and structurally. These strategies were used to reveal the functional mechanism of G. sulfurreducens multiheme cytochromes and also to identify key residues in these proteins for EET. In previous studies, we set the foundations for enhancement of the EET abilities of G. sulfurreducens by characterizing a family of five triheme cytochromes (PpcA-E). These periplasmic cytochromes are implicated in electron transfer between the oxidative reactions of metabolism in the cytoplasm and the reduction of extracellular terminal electron acceptors at the cell's outer surface. The results obtained suggested that PpcA can couple e−/H+ transfer, a property that might contribute to the proton electrochemical gradient across the cytoplasmic membrane for metabolic energy production. The structural and functional properties of PpcA were characterized in detail and used for rational design of a family of 23 single site PpcA mutants. In this review, we summarize the functional characterization of the native and mutant proteins. Mutants that retain the mechanistic features of PpcA and adopt preferential e−/H+ transfer pathways at lower reduction potential values compared to the wild-type protein were selected for in vivo studies as the best candidates to increase the electron transfer rate of G. sulfurreducens. For the first time G. sulfurreducens strains have been manipulated by the introduction of mutant forms of essential

  11. Corporate Foundations

    DEFF Research Database (Denmark)

    Herlin, Heidi; Thusgaard Pedersen, Janni

    2013-01-01

    This paper aims to explore the potential of Danish corporate foundations as boundary organizations facilitating relationships between their founding companies and non-governmental organizations (NGOs). Hitherto, research has been silent about the role of corporate foundations in relation to cross......-sector partnerships. The results of this paper are based on interviews, participant observations, and organizational documents from a 19-month empirical study of a Danish corporate foundation. Findings suggest that corporate foundations have potential to act as boundary organizations and facilitate collaborative...... action between business and NGOs through convening, translation, collaboration, and mediation. Our study provides valuable insights into the tri-part relationship of company foundation NGO by discussing the implications of corporate foundations taking an active role in the realm of corporate social...

  12. Elements of Clean-room Technology and Contamination Control

    Directory of Open Access Journals (Sweden)

    J.C. Kapoor

    2003-07-01

    Full Text Available The heart of the clean room is the high efticiency particualte air (HEPA/ultra-low penetration air (ULPA filter, which provides the highest level of air cleaning ever achieved by a singleprocess step. Filter technology has seen tremendous growth in terms of ultimate performance and air handling capacity. Mere installation of ULPA filters of 99.99995 per cent efficiency for 0.2 um aerosol is not sufficient for achieving the desired performance of a clean room. Other design aspects like flow fields, face velocity, number of air changes, make-up air fractions and precise control of other environmental parameters (temperature, humidity, airflow, noise, vibrations, electrostatic discharge, etc. are equally important.

  13. The integration of Mathematics, Science and Technology in early childhood education and the foundation phase: The role of the formation of the professional identities of beginner teachers

    OpenAIRE

    2015-01-01

    This article focuses on the professional identity formation of six beginner teachers (three in early childhood education and three in the foundation phase), involved in the teaching of Mathematics, Science and Technology (MST). Attention is in particular being paid to the role of professional identity in how they applied innovative teaching methods such as enquiry-based teaching. The study is based on the personal narratives of the six teachers, regarding their own learning experiences in MST...

  14. Impedance of Bucket Foundations

    DEFF Research Database (Denmark)

    Andersen, Lars; Ibsen, Lars Bo; Liingaard, Morten

    2008-01-01

    Modern offshore wind turbines are flexible structures with natural frequencies near the excitation frequencies related to wave and wind-induced loads. In order to obtain a reliable prediction of the structural response, the dynamic stiffness of the foundation must be evaluated accurately...... solutions, finding that the present boundary-element-finite-element model provides accurate results. The influence of the soil properties as well as the skirt length of the foundation is analysed, and each dynamic stiffness component is computed as function of a non-dimensional frequency....

  15. Technology Solutions for New and Existing Homes Case Study: Optimized Slab-on-Grade Foundation Insulation Retrofits

    Energy Technology Data Exchange (ETDEWEB)

    Schirber, T. [NorthernSTAR Buidling American Partnership, Madison, WI (United States); Goldberg, L. [NorthernSTAR Buidling American Partnership, Madison, WI (United States); Mosiman, G. [NorthernSTAR Buidling American Partnership, Madison, WI (United States)

    2016-05-01

    A more accurate assessment of SOG foundation insulation energy savings than traditionally possible is now feasible. This has been enabled by advances in whole building energy simulation with 3-dimensional foundation modelling integration at each time step together with an experimental measurement of the site energy savings of SOG foundation insulation. Ten SOG insulation strategies were evaluated on a test building to identify an optimum retrofit insulation strategy in a zone 6 climate (Minneapolis, MN). The optimum insulation strategy in terms of energy savings and cost effectiveness consisted of two components: (a) R-20 XPS insulation above grade, and, (b) R-20 insulation at grade (comprising an outer layer of R-10 insulation and an interior layer of R-12 poured polyurethane insulation) tapering to R-10 XPS insulation at half the below-grade wall height (the lower half of the stem wall was uninsulated).

  16. The Application of Deep Foundation Supporting Construction Technology in Civil Construction%关于深基坑支护施工技术在土建施工中应用的探究

    Institute of Scientific and Technical Information of China (English)

    林丽

    2013-01-01

    This paper comprehends the application of deep foundation supporting construction technology in civil construction through analyzing the characteristics of deep foundation supporting construction technology, and discusses the important role of deep foundation supporting construction technology in civil construction.%本文通过对深基坑支护施工技术的特点进行分析,了解深基坑支护技术在施工中的应用,并且探讨深基坑支护施工技术对土建施工中的重要作用。

  17. Vasculitis Foundation

    Science.gov (United States)

    ... Read More Click here to view full calendar Vasculitis Patient-Powered Research Network The V-PPRN seeks ... with various forms of vasculitis. Join The Network! Vasculitis Foundation News Introducing our 2017-2018 VCRC-VF ...

  18. Glaucoma Foundation

    Science.gov (United States)

    ... IMPORTANT RESEARCH FINDING First Cellular Model of Exfoliation Glaucoma Research is advancing in the quest to find ... cure for exfoliation syndrome and its associated exfoliation glaucoma, the current focus of The Glaucoma Foundation. Exfoliation ...

  19. Foundation Structure

    OpenAIRE

    Schakenda, Bruno; Nielsen, Søren Andreas; Ibsen, Lars Bo

    2009-01-01

    Method of installing a bucket foundation structure comprising one, two, three or more skirts, into soils in a controlled manner. The method comprises two stages: a first stage being a design phase and the second stage being an installation phase. In the first stage, design parameters are determined relating to the loads on the finished foundation structure; soil profile on the location; allowable installation tolerances, which parameters are used to estimate the minimum diameter and length of...

  20. Sustainable technological process as an element of the sustainable development strategy realisation

    Directory of Open Access Journals (Sweden)

    R. Nowosielski

    2011-10-01

    Full Text Available Purpose: The aim of this work is a presentation of the possibility of the sustainable development conception realisation through the sustainable technological processes designing and implementation.Design/methodology/approach: The article includes analysis and estimation of the nickel and chromium coated on the metal elements. In order to modernization of the real process in direction to the sustainable process, the technical solutions which minimise influence on the environment of galvanic treatment process were presented.Findings: The sustainable technological process reduces the achievement of the sustainable development to small area analysis which is the technological process, what makes possible the quantitative estimation (in the internal area of technology.Research limitations/implications: The definition, the model of the sustainable technology and the sustainable development conception are relative and they have not clear character. It means there is no possibility of absolutely the best technology or technological process determination. Because of that we can only design the better process in the comparison with another with regard to adequate criteria.Practical implications: The solution presented in the paper can apply in the industry to estimation and selection of a group of technological processes which characterise different environmental influences.Originality/value: The paper presents search for the sustainable technological processes according to proposed procedure of the sustainable technology design and implementation. Application of the sustainable technological processes in the local scale can leads to the sustainable development conception realisation in the global scale.

  1. Fabrication technology of chemiluminescent sensitive elements for rocket-borne ozone detectors

    Science.gov (United States)

    Kononkov, V. A.; Lelikova, A. I.; Perov, S. P.

    Attention is given to the technology behind the fabrication of chemiluminescent sensitive elements for rocket-borne ozone detectors. High-silica microporous glass is the basic material required for these detectors. It is noted that the luminophor consists of rhodamine-C and gallic acid, and that the desired ratio of these components depends on the sensitivity of a particular specimen to ozone.

  2. 10th December 2010 - German Delegation from the Novartis Foundation for Sustainable Development visiting the LHC superconducting magnet test hall with Technology Department S. Russenschuck and accompanied by Adviser for Life Sciences M. Dosanjh.

    CERN Multimedia

    Maximilien Brice

    2010-01-01

    10th December 2010 - German Delegation from the Novartis Foundation for Sustainable Development visiting the LHC superconducting magnet test hall with Technology Department S. Russenschuck and accompanied by Adviser for Life Sciences M. Dosanjh.

  3. Multi-element fiber technology for space-division multiplexing applications.

    Science.gov (United States)

    Jain, S; Rancaño, V J F; May-Smith, T C; Petropoulos, P; Sahu, J K; Richardson, D J

    2014-02-24

    A novel technological approach to space division multiplexing (SDM) based on the use of multiple individual fibers embedded in a common polymer coating material is presented, which is referred to as Multi-Element Fiber (MEF). The approach ensures ultralow crosstalk between spatial channels and allows for cost-effective ways of realizing multi-spatial channel amplification and signal multiplexing/demultiplexing. Both the fabrication and characterization of a passive 3-element MEF for data transmission, and an active 5-element erbium/ytterbium doped MEF for cladding-pumped optical amplification that uses one of the elements as an integrated pump delivery fiber is reported. Finally, both components were combined to emulate an optical fiber network comprising SDM transmission lines and amplifiers, and illustrate the compatibility of the approach with existing installed single-mode WDM fiber systems.

  4. Activities of the Pharmaceutical Technology Institute of the Oswaldo Cruz Foundation with medicinal, insecticidal and insect repellent plants.

    Science.gov (United States)

    Gilbert, B; Teixeira, D F; Carvalho, E S; De Paula, A E; Pereira, J F; Ferreira, J L; Almeida, M B; Machado, R da S; Cascon, V

    1999-01-01

    In addition to original research, Far-Manguinhos, the Pharmaceutical Division of the Brazilian Ministry of Health's Oswaldo Cruz Foundation (FIOCRUZ), devotes major attention to the finalising of products for use in public health campaigns or, under contract, for private industrial development. Emphasis is on standardisation, adequate supply, safety in use and efficacy. Among the products discussed in this summary of some of its activities in the chemical and pharmaceutical fields are medicinal plants Bidens pilosa, Cymbopogon citratus, Copaifera species, Mentha crispa, Phyllanthus tenellus Roxb. and other Phyllanthus species, insecticidal plants, Lonchocarpus urucu and Quassia amara, and the insect antifeedant plants Carapa guianensis and Pterodon emarginatus.

  5. 低碳环保型建筑基坑支护新技术%NewB uilding Foundation Pit Supporting technologies with Low carbon environmental protection

    Institute of Scientific and Technical Information of China (English)

    郑桂心

    2014-01-01

    Bamboo is a kind of renewable resources with characteristics of strong reproductive capacity , quick grown and short growth cy-cle.In this paper, a new foundation pit support technology of bamboo composite soil nailing wall which is low carbon environmental protec -tion was introduced.This technology has advantages of scientific and reasonable , green environmental protection , economy, safety, etc. And it has a broad application prospect which is a breakthrough of current soil nailing wall structure material and building concept .Its tech-nique detail is applying bamboo instead of steel soil nail in the foundation pit soil nail wall supporting structure and bamboo split net instead of steel fabric in surface concrete , so the bamboo piles at foundation pit slope foot and bamboo soil nailing together constitute the structure of composite soil nailing wall , can get reliable support of foundation pit .The article expounds on the supporting mechanism , numerical a-nalysis, calculation methods and engineering application of bamboo composite soil nailing wall foundation pit .%传统的土钉墙都是由高耗能高排放的水泥和钢筋构成。毛竹是一种可再生资源,具有抗拉强度高,短期强度相对稳定,长期强度逐渐降低。毛竹的这种特性,符合建筑基坑支护临时性特点。本文提出的低碳环保型毛竹复合土钉墙基坑支护技术,具有取材科学合理、绿色环保、经济、安全等优点,有着广阔的应用前景,是对现行土钉墙的结构用材和构筑理念上的重大突破。具体措施是,在基坑土钉墙支护结构中以毛竹取代了钢质土钉,面层砼中用竹篾网取代钢筋网,基坑坡脚的毛竹排桩与毛竹土钉连在一起构成复合土钉墙结构,能使基坑得到可靠的支护。文章详细阐述了毛竹复合土钉墙基坑支护机理、数值分析、计算方法及工程应用。

  6. Sarcoma Foundation of America

    Science.gov (United States)

    ... Google+ Twitter LinkedIn YouTube © 2017 Sarcoma Foundation of America | All Rights Reserved. | Terms of Use | Privacy Policy Website Design & Hosting by 270net Technologies, Inc. X - Enter Your Location - - or - Get your current location Home About Us History People Public Filings News & Media SFA in the ...

  7. Bucket foundations

    DEFF Research Database (Denmark)

    Foglia, Aligi; Ibsen, Lars Bo

    In this report, bearing behaviour and installation of bucket foundations are reviewed. Different methods and standards are compared with the experimental data presented in Foglia and Ibsen (2014a). The most important studies on these topics are suggested. The review is focused on the response...

  8. Study on the high-precision laser welding technology of nuclear fuel elements processing

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Soo Sung; Yang, M. S.; Kim, W. K.; Lee, D. Y

    2001-01-01

    The proper welding method for appendage of bearing pads and spacers of PHWR nuclear fuel elements is considered important in respect to the soundness of weldments and the improvement of the performance of nuclear fuels during the operation in reactor. The probability of welding defects of the appendage parts is mostly apt to occur and it is connected directly with the safty and life prediction of the nuclear reactor in operation. Recently there has been studied all over the world to develope welding technology by laser in nuclear fuel processing, and the appendage of bearing pads and spacers of PHWR nuclear fuel elements. Therefore, the purpose of this study is to investigate the characteristics of the laser welded specimens and make some samples for the appendage of bearing pads of PHWR nuclear fuel elements. This study will be also provide the basic data for the fabrications of the appendage of bearing pads and spacers. Especially the laser welding is supposed to be used in the practical application such as precise materials manufacturing fields. In this respect this technology is not only a basic advanced technology with wide applications but also likely to be used for the development of directly applicable technologies for industries, with high potential benefits derived in the view point of economy and industry.

  9. Finite Element Analysis of Flat Spiral Spring on Mechanical Elastic Energy Storage Technology

    Directory of Open Access Journals (Sweden)

    Jingqiu Tang

    2014-02-01

    Full Text Available Energy storage technology has become an effective way of storing energy and improving power output controllability in modern power grid. The mechanical elastic energy storage technology on flat spiral spring is a new energy storage technology. This study states the mechanical elastic energy storage technology, models the mechanical model. Aimed to three kinds of structure and size of flat spiral spring, the finite element model are modeled, modal analysis is completed and the natural frequencies and the first 10-order vibration modes of the spring are analyzed, the relationship of natural frequency and vibration mode of spiral spring and structure and size is analyzed. The research results can provide the reference for the structure design and dynamics analysis.

  10. IFMIF (International Fusion Materials Irradiation Facility) key element technology phase interim report

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Hiroo; Ida, Mizuho; Sugimoto, Masayoshi; Takeuchi, Hiroshi; Yutani, Toshiaki (eds.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2002-03-01

    Activities of International Fusion Materials Irradiation Facility (IFMIF) have been performed under an IEA collaboration since 1995. IFMIF is an accelerator-based deuteron (D{sup +})-lithium (Li) neutron source designed to produce an intense neutron field (2 MW/m{sup 2}, 20 dpa/year for Fe) in a volume of 500 cm{sup 3} for testing candidate fusion materials. In 2000, a 3 year Key Element technology Phase (KEP) of IFMIF was started to reduce the key technology risk factors. This interim report summarizes the KEP activities until mid 2001 in the major project work-breakdown areas of accelerator, target, test facilities and design integration. (author)

  11. The Finite Elements Method (FEM versus traditional Methods (TM, in the estimation of settlement and modulus of soil reaction for foundation slabs design on soils with natural or man-made cavities

    Directory of Open Access Journals (Sweden)

    Escolano-Sánchez, F.

    2015-03-01

    Full Text Available Direct foundations with continuous elements, such as slabs, provide more advantages than direct foundations with isolated elements, such as footings, and deep foundations, such as piles, in the case of soil with natural or man-made cavities. The slabs are usually designed by two-dimensional models which show their shape on the plant, on a lineal elastic support, represented by a modulus of soil reaction. Regarding the settlement estimation, the following article compares the Finite Elements Method (FEM versus the classical Method (CM to select the modulus of soil reaction used to design foundations slabs in sensitive soils and sites with possible cavities or collapses. This analysis includes one of these cavities in the design to evaluate the risk of fail.Las cimentaciones directas con elementos continuos «losas», tienen ventajas sobre las cimentaciones directas con elementos aislados «zapatas» y sobre las cimentaciones profundas «pilotes», frente a la presencia de terrenos problemáticos. Las losas se diseñan de forma habitual con modelos bidimensionales que representan su forma en planta, apoyada en un medio elástico y lineal, representado por un módulo de balasto. En el presente artículo se realiza un análisis comparativo, para la estimación de asientos, entre el Método de Elementos Finitos (FEM y el Método Clásico (MC, para la elección de los módulos de balasto que se utilizan en el diseño de losas de cimentación en terrenos con blandones y cavidades naturales o antrópicas. Este análisis considera el peligro de la presencia de una de estas cavidades dentro de su diseño, de esta forma, el riesgo de fallo puede ser valorado por ambos métodos.

  12. Static Behaviour of Bucket Foundations

    DEFF Research Database (Denmark)

    Larsen, Kim André

    . The monopod concept is investigated in this thesis, regarding the static behaviour from loads relevant to offshore wind turbines. The main issue in this concept is the rotational stiffness of the foundation and the combined capacity dominated by moments. The vertical bearing capacity of bucket foundations...... theory is proposed. The proposed expression applies to plane strain as well as axis-symmetric stress conditions for foundations with smooth or rough bases. A thorough experimental investigation of the static behaviour of bucket foundations subjected to combined loading is carried out. Laboratory tests...... as well as large-scale tests on bucket foundations subjected to low vertical load are performed during this work. Numerical simulations of the tests performed are carried out using the Mohr Coulomb material model and the commercial finite element code ABAQUS. Based on the present work, the finite element...

  13. Evaluating rare earth element availability: a case with revolutionary demand from clean technologies.

    Science.gov (United States)

    Alonso, Elisa; Sherman, Andrew M; Wallington, Timothy J; Everson, Mark P; Field, Frank R; Roth, Richard; Kirchain, Randolph E

    2012-03-20

    The future availability of rare earth elements (REEs) is of concern due to monopolistic supply conditions, environmentally unsustainable mining practices, and rapid demand growth. We present an evaluation of potential future demand scenarios for REEs with a focus on the issue of comining. Many assumptions were made to simplify the analysis, but the scenarios identify some key variables that could affect future rare earth markets and market behavior. Increased use of wind energy and electric vehicles are key elements of a more sustainable future. However, since present technologies for electric vehicles and wind turbines rely heavily on dysprosium (Dy) and neodymium (Nd), in rare-earth magnets, future adoption of these technologies may result in large and disproportionate increases in the demand for these two elements. For this study, upper and lower bound usage projections for REE in these applications were developed to evaluate the state of future REE supply availability. In the absence of efficient reuse and recycling or the development of technologies which use lower amounts of Dy and Nd, following a path consistent with stabilization of atmospheric CO(2) at 450 ppm may lead to an increase of more than 700% and 2600% for Nd and Dy, respectively, over the next 25 years if the present REE needs in automotive and wind applications are representative of future needs.

  14. 复合桩基地基极限承载力的下限有限元解%Finite element lower bound limit solutions for ultimate bearing capacity of subsoil under raft of composite piled foundations

    Institute of Scientific and Technical Information of China (English)

    蒋刚; 孙君; 王旭东

    2011-01-01

    When the composite piled foundation reaches the general ultimate bearing capacity status, an increment of the ultimate bearing capacity for natural foundation is induced by "barrier effect" of piles.The analysis of the problem can be simplified for both the sum of the vertical ultimate bearing capacity of foundation and the increment of the ultimate bearing capacity of foundation soil horizontally sliding around piles.Based on the finite element plastic lower bound limit method, the numerical solutions for the vertical ultimate bearing capacity of foundation and the horizontal resistance sliding around piles varying with soil depth are obtained, and the sliding resistance formula is also established.The sliding resistance coefficient &s reduces with the increase of pile spacing.The increment of the ultimate bearing capacity △fu decreases with the increase of pile spacing.The results indicate that the resistance sliding around piles in the composite piled foundation is being and can not be ignored, and that the ultimate bearing capacity of the composite piled foundation has certain increment, which can be regarded as the security reserve of foundation.%复合桩基在达到整体极限承载状态时,因桩的"遮拦作用"使得地基极限承载力较天然地基有一定提高.其分析可简化为地基竖向极限承载力和地基土水平向绕桩作用产生的极限承载力提高值的叠加.利用下限有限元方法,求解得到地基的极限承载力和不同深度处土体绕桩阻力的数值解,并建立了绕桩阻力计算公式.绕桩阻力系数ks随桩间距的增加而逐渐减小.地基极限承载力提高值△fu随桩间距的增加而逐渐降低.计算表明:复合桩基下绕桩阻力存在并不可忽视,承台下地基极限承载力有明确的提高,可以作为地基的安全储备.

  15. Mathematical foundations of neurocomputing

    Energy Technology Data Exchange (ETDEWEB)

    Amari, S. (Tokyo Univ. (Japan). Faculty of Engineering)

    1990-09-01

    Neurocomputing makes use of parallel dynamical interactions of modifiable neuron-like elements. It is important to show, by mathematical treatments, the capabilities and limitations of information processing by various architectures of neural networks. This paper, gives mathematical foundations to neurocomputing. It considers the capabilities of transformations by layered networks, statistical neurodynamics, the dynamical characteristics of associative memory, a general theory of neural learning, and self-organization of neural networks.

  16. Building a Foundation: How Technology-Rich Project-Based Learning Transformed Talladega County Schools. Case Study

    Science.gov (United States)

    Jones, Rachel; Hall, Sara White; Thigpen, Kamila; Murray, Tom; Loschert, Kristen

    2015-01-01

    This report demonstrates how one predominantly low-income school district dramatically improved student engagement in the classroom and increased high school graduation rates through project-based learning (PBL) and the effective use of technology. The report, which includes short video segments with educators and students, focuses on Talladega…

  17. Foundations of Galois theory

    CERN Document Server

    Postnikov, MM; Stark, M; Ulam, S

    1962-01-01

    Foundations of Galois Theory is an introduction to group theory, field theory, and the basic concepts of abstract algebra. The text is divided into two parts. Part I presents the elements of Galois Theory, in which chapters are devoted to the presentation of the elements of field theory, facts from the theory of groups, and the applications of Galois Theory. Part II focuses on the development of general Galois Theory and its use in the solution of equations by radicals. Equations that are solvable by radicals; the construction of equations solvable by radicals; and the unsolvability by radica

  18. The integration of Mathematics, Science and Technology in early childhood education and the foundation phase: The role of the formation of the professional identities of beginner teachers

    Directory of Open Access Journals (Sweden)

    Marie Botha

    2015-02-01

    Full Text Available This article focuses on the professional identity formation of six beginner teachers (three in early childhood education and three in the foundation phase, involved in the teaching of Mathematics, Science and Technology (MST. Attention is in particular being paid to the role of professional identity in how they applied innovative teaching methods such as enquiry-based teaching. The study is based on the personal narratives of the six teachers, regarding their own learning experiences in MST, the impact of their professional training at an institution of higher education, as well as their first experiences as MST teachers in the workplace. A qualitative research design was applied and data was obtained through visual (photo collages and written stories, observation and interviews. Whilst all the teachers held negative attitudes towards Mathematics, this situation was turned around during their university training. The three teachers in early childhood education experienced their entrance to the profession as positive, due mainly to the support of colleagues in their application of innovative teaching methods. Two teachers in the foundation phase, however, experienced the opposite. The findings emphasise the complex processes in the moulding of a professional teacher identity and how teaching practices are influenced by these processes.

  19. On Pile Foundation Construction Technology and Its Application%论桩基础施工技术和应用

    Institute of Scientific and Technical Information of China (English)

    肖蓓

    2014-01-01

    地基基础工程施工前,根据打(沉)桩方法的不同,钢筋混凝土预制桩基础施工有锤击沉桩法、静力压桩法及振动法等,以锤击沉桩法和静力压桩法应用最为普遍。钢筋混凝土灌注桩是一种直接在现场桩位上就地成孔,然后在孔内浇筑混凝土或安放钢筋笼再浇筑混凝土而成的桩。按其成孔方法不同,可分为钻孔灌注桩、沉管灌注桩、人工挖空和挖空扩底灌注桩。%Before foundation construction, depending on the piling method, the basic construction of precast reinforced concrete piles have hammer pile sinking method, static pressure piling method and the vibration method, in which hammer pile sinking method and static pressure piling method are most commonly used. Reinforced concrete pile is a pile directly in the field on the spot into the hole, and then pouring concrete reinforcement cage placed in the holes or pouring concrete from the pile again. According to different holing methods, it can be divided into cast-in-situ bored pile, tube-sinking cast-in-situ pile, artificial hollowed out and hollowed reamed pile.

  20. 复合地基技术在软土路基处理中的应用%A Study of Composite Foundation Technology Applied in Soft Soil Foundation Treatment

    Institute of Scientific and Technical Information of China (English)

    吴祯

    2013-01-01

      通过工程实例,介绍采用“深层搅拌法”形成水泥土桩复合地基处理软土路基的设计、施工及检测结果。%  Combined with some project case, cement soil pile composite foundation by deep mixing method is introduced in detail about its design, construction and detection results in treating soft soil foundation.

  1. Manufacture of refractive and diffractive beam-shaping elements in higher quantities using glass molding technology

    Science.gov (United States)

    Wolz, Michael; Blöcher, Ullrich; Dross, Gerhard; Schmitt, Jana; Bischoff, Christian; Umhofer, Udo

    2015-03-01

    Laser beam shaping elements can be used e.g. for material processing. The results of these processes can be improved when the usually Gaussian profile of the laser is transformed into a top hat profile, which can be circular or rectangular in shape. Another frequently used type of beam-forming devices are beam splitters for parallel processing using only one laser. These types of beam formers can be implemented as diffractive or refractive elements. So far these optics are produced either directly by means of lithography e.g. in glass or in plastic using a hot embossing process or nanoimprint technology. Elements produced in this way have either the disadvantage of high costs or they are limited in temperature range, laser power or wavelength. A newly developed molding process for glass allows the manufacture of larger numbers of optics with reduced cost. The production of molds for refractive top hat beam shaping devices requires very high precision of the applied grinding process. Form deviations below 100 nm are necessary to obtain a homogeneous illumination. Measurements of the surface topography of gauss to top hat beam shaping elements using white light interferometry are presented as well as results of optical measurements of the beam profile using a camera. Continuous diffractive beam shaping elements for beam splitting applications are designed to generate several sub-beams each carrying the same energy. In order to achieve this, form deviations of less than 50 nm are required. Measurements of the surface of a 1 x 5 beam splitter are compared with ideal beam splitter profiles. The resulting beam intensity distribution of a molded element is presented.

  2. Could the extensive use of rare elements in renewable energy technologies become a cause for concern?

    Science.gov (United States)

    Bradshaw, A. M.; Reuter, B.; Hamacher, T.

    2015-08-01

    The energy transformation process beginning to take place in many countries as a response to climate change will reduce substantially the consumption of fossil fuels, but at the same time cause a large increase in the demand for other raw materials. Whereas it is difficult to estimate the quantities of, for example, iron, copper and aluminium required, the situation is somewhat simpler for the rare elements that might be needed in a sustainable energy economy based largely on photovoltaic sources, wind and possibly nuclear fusion. We consider briefly each of these technologies and discuss the supply risks associated with the rare elements required, if they were to be used in the quantities that might be required for a global energy transformation process. In passing, we point out the need in resource studies to define the terms "rare", "scarce" and "critical" and to use them in a consistent way.

  3. The rare-earth elements: vital to modern technologies and lifestyles

    Science.gov (United States)

    Van Gosen, Bradley S.; Verplanck, Philip L.; Long, Keith R.; Gambogi, Joseph; Seal, Robert R., II

    2014-01-01

    Until recently, the rare-earth elements (REEs) were familiar to a relatively small number of people, such as chemists, geologists, specialized materials scientists, and engineers. In the 21st century, the REEs have gained visibility through many media outlets because of (1) the public has recognized the critical, specialized properties that REEs contribute to modern technology, as well as (2) China's dominance in production and supply of the REEs and (3) international dependence on China for the majority of the world's REE supply.

  4. IFMIF-KEP. International fusion materials irradiation facility key element technology phase report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-01

    The International Fusion Materials Irradiation Facility (IFMIF) is an accelerator-based D-Li neutron source designed to produce an intense neutron field that will simulate the neutron environment of a D-T fusion reactor. IFMIF will provide a neutron flux equivalent to 2 MW/m{sup 2}, 20 dpa/y in Fe, in a volume of 500 cm{sup 3} and will be used in the development and qualification of materials for fusion systems. The design activities of IFMIF are performed under an IEA collaboration which began in 1995. In 2000, a three-year Key Element Technology Phase (KEP) of IFMIF was undertaken to reduce the key technology risk factors. This KEP report describes the results of the three-year KEP activities in the major project areas of accelerator, target, test facilities and design integration. (author)

  5. TECHNOLOGICAL ELEMENTS OF THE SYSTEM OF STRATEGIC PLANNING AS TOOLS FOR PROVIDING THE ECONOMIC DEVELOPMENT OF THE SERVICES SPHERE

    Directory of Open Access Journals (Sweden)

    V. V. Gromov

    2015-01-01

    Full Text Available Topicality article is to determine the composition of the technological elements of the strategic planning system, the interaction of which is aimed at achieving the planned economic results in the changing factors influence macro microenvironments on the activities of institutions and economic activities of services. The articles structurally is made on the basis of respect for the logical sequence of interactions of technological elements of strategic planning and combat their negative factors of external and internal environment. Active interaction of technological elements of strategic planning tools is to ensure long-term development planning authorities of economic entities, economic activities service sector for sustainable economic growth. Contribution of the author in the scope of this article is to generalize the definition of the target composition and installation of technological elements of strategic planning and development institutions and industry components of the service sector.

  6. The foundation pile improved finite bar element method under oblique eccentric loading%倾斜偏心荷载作用下基桩改进有限杆单元法

    Institute of Scientific and Technical Information of China (English)

    朱永波; 郭秋香

    2009-01-01

    在分析探讨相关文献资料的基础上,结合算例对倾斜偏心荷载作用下基桩的受力特性以及改进有限杆单元法进行了较系统深入的研究,指出改进有限元的分析在国内外具有重要的理论与工程实际意义.%Based on analysis and discussing related references and data, combined with calculation example, the foundation pile mechanical characteristics under oblique eccentric loading and improved finite bar element method were researched systematically and profoundly. It point-ed out that improved finite element analysis had important theoretical and engineering practical meanings at home and abroad.

  7. 32-element beta detector developed at the Institute of Electron Technology (ITE)

    Science.gov (United States)

    Wegrzecki, Maciej; Yakushev, Alexander; Bar, Jan; Budzyński, Tadeusz; Grabiec, Piotr; Kłos, Helena; Panas, Andrzej; Słysz, Wojciech; Stolarski, Maciej; Szmigiel, Dariusz; Wegrzecka, Iwona; Zaborowski, Michał

    2014-08-01

    The paper presents the design, technology and parameters of a new .silicon detector for detection of electrons (below named as beta detector) developed at the Institute of Electron Technology (ITE). The detector will be used for research on transactinide elements at the GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt (GSI). The detector consists of a monolithic 32-element array with an active area diameter of 90 mm and a thickness of 0.9 mm. The starting material is a high-resistivity ν silicon wafer (5 kΩcm resistivity). 32 planar p+-ν junctions are formed by boron diffusion on the top side of the wafer. On the bottom side, an n+ region, which forms a common cathode, is formed on the entire surface by phosphorus diffusion. The array is mounted on a special epoxy-glass laminate substrate, copper-clad on both sides. Two model detectors have been fabricated and studied. Very good electrical parameters have been achieved. For the first array, with supply voltage VR = 20 V, the minimum dark current was 8 nA, the maximum dark current 97.1 nA, and the average dark current 25.1 nA. For the second array, it was 11.5 nA, 378.8 nA and 40.0 nA respectively.

  8. Novel technology for sewage sludge utilization: preparation of amino acids chelated trace elements (AACTE) fertilizer.

    Science.gov (United States)

    Liu, Yangsheng; Kong, Sifang; Li, Yaqiong; Zeng, Hui

    2009-11-15

    This study developed a novel technology for sewage sludge utilization. The bacteria proteins in the sewage sludge were extracted to produce the amino acid chelated trace elements (AACTE) fertilizer by virtue of several chemical processes. Firstly, the sewage sludge was hydrolyzed under hot hydrochloric acid solution to obtain protein solution. The effects of hydrolysis temperature, reaction time and pH on the extraction ratio of protein from the sewage sludge were investigated. Secondly, the protein solution was further hydrolyzed into amino acids under hot acid condition. The effects of the HCl dosage, hydrolysis temperature and reaction time on the yields of amino acids were investigated in detail. Thirdly, the raw amino acids solution was purified by activated carbon decolorization and glacial acetic acid dissolution. Finally, the purified amino acids were used to produce the AACTE fertilizer by chelating with trace elements. Results showed that, under optimum hydrolysis conditions, 78.5% of protein was extracted from the sewage sludge and the amino acids yield was 10-13 g per 100g of dry sludge. The AACTE fertilizer produced was in accordance with China Standard for Amino Acids Foliar Fertilizer. This novel technology is more environmentally friendly compared with the conventional sludge treatments.

  9. Buckling Analysis of Bucket Foundations for Wind Turbines in Deep Water

    DEFF Research Database (Denmark)

    Madsen, Søren; Andersen, Lars; Ibsen, Lars Bo

    2011-01-01

    Using large suction caissons for offshore wind turbines is an upcoming technology also referred to as bucket foundations. The bucket foundation does not require heavy installation equipment, but since it is constructed as a thin steel shell structure, instability, in form of buckling, becomes...... a crucial issue during installation. This paper addresses the hydrostatic buckling pressure of the bucket foundation using threedimensional, non-linear finite element analysis. The main finding of this paper is that introducing an imperfect geometry based on the first linear pre-buckling mode shape, can...... increase the buckling load significantly....

  10. Study on Dewatering Technology for Deep Foundation Pit Along River%傍河深基坑降水技术研究

    Institute of Scientific and Technical Information of China (English)

    李芳; 王文明

    2013-01-01

    Taking 2 cases as the examples and based on the characteristics of being near to the recharging source, thick aqui-fer and strong permeability, the study was made on dewatering technology for deep foundation pit along river in the dewatering scheme selection, dewatering design, dewatering well construction and the effects on the surrounding buildings and under-ground water, in order to provide the reference to the similar projects in the area of Qiangang of Capital Steel Company.%  以首钢迁钢生活小区2、4号基坑降水工程为例,针对傍河深基坑具有靠近补给源及含水层厚度大且渗透性强等特点,从降水方案选取、降水设计、降水井施工、对周边的建筑和地下水影响及采取的措施等几个方面,对傍水深基坑降水技术进行了研究,以期为该区域及类似工程提供借鉴和参考。

  11. From the NSF: The National Science Foundation's Investments in Broadening Participation in Science, Technology, Engineering, and Mathematics Education through Research and Capacity Building.

    Science.gov (United States)

    James, Sylvia M; Singer, Susan R

    2016-01-01

    The National Science Foundation (NSF) has a long history of investment in broadening participation (BP) in science, technology, engineering, and mathematics (STEM) education. A review of past NSF BP efforts provides insights into how the portfolio of programs and activities has evolved and the broad array of innovative strategies that has been used to increase the participation of groups underrepresented in STEM, including women, minorities, and persons with disabilities. While many are familiar with these long-standing programmatic efforts, BP is also a key component of NSF's strategic plans, has been highlighted in National Science Board reports, and is the focus of ongoing outreach efforts. The majority of familiar BP programs, such as the Louis Stokes Alliances for Minority Participation (now 25 years old), are housed in the Directorate for Education and Human Resources. However, fellowship programs such as the Graduate Research Fellowships and Postdoctoral Research Fellowships under the Directorate for Biological Sciences (and parallel directorates in other STEM disciplines) are frequently used to address underrepresentation in STEM disciplines. The FY2016 and FY2017 budget requests incorporate funding for NSF INCLUDES, a new cross-agency BP initiative that will build on prior successes while addressing national BP challenges. NSF INCLUDES invites the use of innovative approaches for taking evidence-based best practices to scale, ushering in a new era in NSF BP advancement.

  12. Foundations of chaotic mixing.

    Science.gov (United States)

    Wiggins, Stephen; Ottino, Julio M

    2004-05-15

    The simplest mixing problem corresponds to the mixing of a fluid with itself; this case provides a foundation on which the subject rests. The objective here is to study mixing independently of the mechanisms used to create the motion and review elements of theory focusing mostly on mathematical foundations and minimal models. The flows under consideration will be of two types: two-dimensional (2D) 'blinking flows', or three-dimensional (3D) duct flows. Given that mixing in continuous 3D duct flows depends critically on cross-sectional mixing, and that many microfluidic applications involve continuous flows, we focus on the essential aspects of mixing in 2D flows, as they provide a foundation from which to base our understanding of more complex cases. The baker's transformation is taken as the centrepiece for describing the dynamical systems framework. In particular, a hierarchy of characterizations of mixing exist, Bernoulli --> mixing --> ergodic, ordered according to the quality of mixing (the strongest first). Most importantly for the design process, we show how the so-called linked twist maps function as a minimal picture of mixing, provide a mathematical structure for understanding the type of 2D flows that arise in many micromixers already built, and give conditions guaranteeing the best quality mixing. Extensions of these concepts lead to first-principle-based designs without resorting to lengthy computations.

  13. BEST3D user's manual: Boundary Element Solution Technology, 3-Dimensional Version 3.0

    Science.gov (United States)

    1991-01-01

    The theoretical basis and programming strategy utilized in the construction of the computer program BEST3D (boundary element solution technology - three dimensional) and detailed input instructions are provided for the use of the program. An extensive set of test cases and sample problems is included in the manual and is also available for distribution with the program. The BEST3D program was developed under the 3-D Inelastic Analysis Methods for Hot Section Components contract (NAS3-23697). The overall objective of this program was the development of new computer programs allowing more accurate and efficient three-dimensional thermal and stress analysis of hot section components, i.e., combustor liners, turbine blades, and turbine vanes. The BEST3D program allows both linear and nonlinear analysis of static and quasi-static elastic problems and transient dynamic analysis for elastic problems. Calculation of elastic natural frequencies and mode shapes is also provided.

  14. A piloted comparison of elastic and rigid blade-element rotor models using parallel processing technology

    Science.gov (United States)

    Hill, Gary; Du Val, Ronald W.; Green, John A.; Huynh, Loc C.

    1990-01-01

    A piloted comparison of rigid and aeroelastic blade-element rotor models was conducted at the Crew Station Research and Development Facility (CSRDF) at Ames Research Center. FLIGHTLAB, a new simulation development and analysis tool, was used to implement these models in real time using parallel processing technology. Pilot comments and quantitative analysis performed both on-line and off-line confirmed that elastic degrees of freedom significantly affect perceived handling qualities. Trim comparisons show improved correlation with flight test data when elastic modes are modeled. The results demonstrate the efficiency with which the mathematical modeling sophistication of existing simulation facilities can be upgraded using parallel processing, and the importance of these upgrades to simulation fidelity.

  15. Finite element analysis of fibre augmented steel technology pipe (FAST-PIPEtm)

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Qishi; Yoosef-Ghodsi, Nader [C-FER Technologies, Edmonton, Alberta, (Canada); Salama, Mamdouh [ConocoPhillips Company, Houston, Texas, (United States)

    2010-07-01

    FAST-PipeTM is fabricated from a steel liner hoop-wound with non-impregnated fibreglass strands. The design of this new technology requires developing analytical methods. This paper reported how the finite element program ABAQUS has been used to develop shell models capable of simulating the burst and bending behaviour of FAST-PIPETM. Experimental measurements were performed on 48 and 12 inch pipes to calibrate and to validate the finite element analysis models. The material properties were obtained using coupon tests, and the elastic modulus of the fibre wrap using burst tests. The results showed that the failure of both the burst and bend models was defined as the point where the wrap hoop strain reached a failure strain of about 2%. It is found that the analytical model was accurate based on the burst test results. Also, the moment capacity is not affected by the wrap elasticity modulus value and the type of yield criteria used for the steel liner.

  16. Computerized Laboratory in Science and Technology Teaching: Course in Machine Elements

    Directory of Open Access Journals (Sweden)

    Ivan KOLAROV

    2005-04-01

    Full Text Available The computer registration of physical and mechanical quantities gives a lot of possibilities for machine elements and mechanisms research. The advantages of well-organized computer laboratory both technical and methodological are namely: registration and on-line observation of a number of processes with random speed; replacement of high-cost specialized laboratory equipment; mathematical data processing; solving educational problems by modern technologies. The purpose of this paper is to present the results of implementation of universal computer system for registering physical and mechanical quantities of elastic coupling, prepared in the laboratory of Machine Elements at the Higher School of Transport, Sofia, Bulgaria. The results are obtained by a special stand and the quantities are registered by a universal interface and software. After mathematical processing a number of characteristics and properties important for practice, such as diagram of friction and dumping in the coupling, shaft angle speed, etc. have been obtained. The interface and software used allow to students to make the electrical scheme of measuring by them, to acquire basic knowledge for the problem investigated and to acquire self-confidence of solving such problems in practice.

  17. Theoretical Foundations of Software Technology.

    Science.gov (United States)

    1983-02-14

    individual concept [221, the clause following the noun group can not be completing the description. By "individual concept" Carnap means those...34Conceptual Analysis of Noun Group in English", IJCAI-77 (21) Levi J. N. The Syntax and Semantics of Complex Nominals, Academic Press, 1978 (22) Carnap , R

  18. Use prospect of the of athermic technologies of metal softening for rolling stock elements

    Directory of Open Access Journals (Sweden)

    N.N. Grischenko

    2013-06-01

    Full Text Available Purpose. The purpose of work is the possibility estimation of аthermic technologies use of cold-deformed metal softening for elements of railway car body and wheel. Methodology. The material for research is the carbon steel of the wheel rim fragment containing 0.55%С, 0.74%Mn, 0.33%Si, and the steel 20. The wheel steel is studied after heat strengthening and cold work after operation. Steel 20 is studied after plastic cold work by rolling. Electric pulse treatment (ET is carried out on the special equipment. As the property of metal strength the Vickers hardness number is used. The microstructure research is carried out using the light and electronic microscope. Findings. During operation of the rolling stock elements with different strength level origin of damages on metallic surfaces is caused by a simultaneous load action. Taking into account that forming of breakdown sites is largely determined by the state of metal volumes nearby the places of maximal active voltages, the technology development of defect accumulation slowdown or the level of active voltages development allow one to prolong the operating term of rolling stock elements. After electric pulse treatment of the wheel rim fragment the regular changes of metal internal structure corresponded to the hardness changes. The hardness of low carbon steel increases proportional to the increase of the level of cold work by rolling. Alternating bending of the cold-deformed flat is accompanied by strength decrease, which is caused by the metal substructure changes. Originality. The softening process of the cold-worked steel is accompanied by substructure changes, which to a greater extent correspond to the hardening development from the plastic cold-work: dispersion of the dislocation cellular structure, formation of the new sub boundaries and displacement of the formed sub boundaries. Practical value. Introduction of electric pulse treatment in the conditions of railway depots repair base

  19. IFMIF (International Fusion Materials Irradiation Facility) key element technology phase task description

    Energy Technology Data Exchange (ETDEWEB)

    Ida, M.; Nakamura, H.; Sugimoto, M.; Yutani, T.; Takeuchi, H. [eds.] [Japan Atomic Energy Research Inst., Tokai Research Establishment, Fusion Neutron Laboratory, Tokai, Ibaraki (Japan)

    2000-08-01

    In 2000, a 3 year Key Element technology Phase (KEP) of the International Fusion Materials Irradiation Facility (IFMIF) has been initiated to reduce the key technology risk factors needed to achieve continuous wave (CW) beam with the desired current and energy and to reach the corresponding power handling capabilities in the liquid lithium target system. In the KEP, the IFMIF team (EU, Japan, Russian Federation, US) will perform required tasks. The contents of the tasks are described in the task description sheet. As the KEP tasks, the IFMIF team have proposed 27 tasks for Test Facilities, 12 tasks for Target, 26 tasks for Accelerator and 18 tasks for Design Integration. The task description by RF is not yet available. The task items and task descriptions may be added or revised with the progress of KEP activities. These task description sheets have been compiled in this report. After 3 years KEP, the results of the KEP tasks will be reviewed. Following the KEP, 3 years Engineering Validation Phase (EVP) will continue for IFMIF construction. (author)

  20. Web services foundations

    CERN Document Server

    Bouguettaya, Athman; Daniel, Florian

    2013-01-01

    Web services and Service-Oriented Computing (SOC) have become thriving areas of academic research, joint university/industry research projects, and novel IT products on the market. SOC is the computing paradigm that uses Web services as building blocks for the engineering of composite, distributed applications out of the reusable application logic encapsulated by Web services. Web services could be considered the best-known and most standardized technology in use today for distributed computing over the Internet.Web Services Foundations is the first installment of a two-book collection coverin

  1. 水利水电地基工程施工技术分析%Technological Analysis of the Construction of Hydropower Foundation Projects

    Institute of Scientific and Technical Information of China (English)

    王惠卿

    2014-01-01

    Foundation engineering is one of the most im-portant links to any construction project. Paying more at ention to the foundation engineering can lay a good foundation for the future construction. The author il ustrates some problems of the foundation construction in hydropower field and discusses bad foundation reinforcement and handling.%地基工程对于任何建筑工程来说都是至关重要的一个环节,加强对地基工程的重视才能为以后的施工打下好的基础。笔者在本文中针对水利水电领域地基施工的一些问题做了说明,对不良地基的加固和处理做了讨论。

  2. Analysis of Core Drilling Method Detection Technology of Pile Foundation%浅析桩基础钻芯法检测技术

    Institute of Scientific and Technical Information of China (English)

    张巧慧

    2014-01-01

    钻芯法检测是检测方法中应用最为普遍的一种方法。本文从抽芯检测方案的制定、钻孔抽芯的施工要点、钻孔抽芯检测的质量评定等方面详细介绍了桩基础钻芯法检测技术,对于同类工程的检测具有一定的参考价值。%Core drilling detection method is the most common method. This paper introduces core drilling method detection technology from the development of core pulling detection programs, the construction elements of borehole core, and the quality assessment of borehole core testing, which has some reference value for the detection of similar projects.

  3. 水平荷载下导管架平台桩基础的非线性有限元分析%Nonlinear finite element analysis of jacket platform pile foundations under lateral loads

    Institute of Scientific and Technical Information of China (English)

    袁志林; 段梦兰; 陈祥余; 钟超; 王建国

    2012-01-01

    导管架平台桩基础的控制荷载主要为风荷载、波浪荷载、地震荷载等水平荷载,为研究水平荷载下导管架平台桩基础的承载特性,采用非线性有限元分析方法对水平荷载下桩-土之间的相互作用进行研究,提出了有效模拟桩基水平承载特性的有限元模型,分析了模型桩的刚度、直径、土质参数中水平土压力系数、剪胀角对桩基承载特性的影响及水平荷载下群桩承载特性,并将有限元计算结果与API规范及模型试验结果进行对比.研究结果表明,非线性有限元分析方法分析水平荷载下桩-土相互作用是可行的,计算结果可为导管架平台的桩基设计提供参考.%The control loads of jacket platform pile foundations are the wind load, wave load, seismic load and other lateral loads. A fundamental study of the soil response of piles subjected to lateral loads is conducted using the nonlinear finite element analysis. A finite element model is established to simulate the response of a pile subjected to lateral loads effectively. The effects of pile properties, i.e. stiffness and diameter and soil properties, i.e., coefficient of horizontal earth pressure, dilation angle on the response of a pile subjected to lateral loads are investigated. In addition, the response of pile groups under lateral loads is also analyzed. Finally, the results of finite element analysis are compared with API recommendations and the model test results. The results of the study show that the nonlinear finite element analysis is accurate in analyzing soil response of piles subjected to lateral loads. The calculation results can provide reference for the pile foundation design of jacket platform.

  4. 河床砂石地质状况深基坑降水及开挖施工技术%Deep foundation dewatering and excavation construction technologies of riverbed with sandy soil geological conditions

    Institute of Scientific and Technical Information of China (English)

    光俊民

    2015-01-01

    Combining with coarse grid foundation construction example of Gansu Jingchuan sewage treatment engineering,introduces foundation construction schemes,and describes critical construction technology procedures and construction methods controlling essentials of dewatering,ex-cavation and cushion construction. Through monitoring foundation slope and water level,it finally puts forward safety guarantee measures.%结合甘肃泾川污水处理工程粗格栅基坑施工实例,介绍了基坑施工的方案,对降水、开挖、垫层施工等关键工序的施工方法控制要点进行了阐述,通过对基坑边坡及水位的监测,提出了安全保证措施。

  5. COST action TD1407: network on technology-critical elements (NOTICE)--from environmental processes to human health threats.

    Science.gov (United States)

    Cobelo-García, A; Filella, M; Croot, P; Frazzoli, C; Du Laing, G; Ospina-Alvarez, N; Rauch, S; Salaun, P; Schäfer, J; Zimmermann, S

    2015-10-01

    The current socio-economic, environmental and public health challenges that countries are facing clearly need common-defined strategies to inform and support our transition to a sustainable economy. Here, the technology-critical elements (which includes Ga, Ge, In, Te, Nb, Ta, Tl, the Platinum Group Elements and most of the rare-earth elements) are of great relevance in the development of emerging key technologies-including renewable energy, energy efficiency, electronics or the aerospace industry. In this context, the increasing use of technology-critical elements (TCEs) and associated environmental impacts (from mining to end-of-life waste products) is not restricted to a national level but covers most likely a global scale. Accordingly, the European COST Action TD1407: Network on Technology-Critical Elements (NOTICE)-from environmental processes to human health threats, has an overall objective for creating a network of scientists and practitioners interested in TCEs, from the evaluation of their environmental processes to understanding potential human health threats, with the aim of defining the current state of knowledge and gaps, proposing priority research lines/activities and acting as a platform for new collaborations and joint research projects. The Action is focused on three major scientific areas: (i) analytical chemistry, (ii) environmental biogeochemistry and (iii) human exposure and (eco)-toxicology.

  6. Research on Measuring Technology for In-pile Fuel Element Testing

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The tested fuel assembly for In-pile test for PWR fuel element with instrumentation consisted of 4instrumented fuel elements and total 12 sets of transducers. Double claddings are adopted to raise fueltemperature. Two fuel elements each have 2 thermocouples for measuring separately the fuel centerlinetemperature and the cladding surface temperature. The other two elements have membrane type oressure

  7. Construction Technologies of Vacuum Preloading Foundation Treatment in Tianjin Port%浅析天津港真空预压法地基处理的主要施工技术

    Institute of Scientific and Technical Information of China (English)

    刘云杰

    2012-01-01

    Based on vacuum preloading soft foundation treatment technologies usually used in Tianjin Port, we emphasize conventional vacuum preloading method and the construction technologies of straight-line vacuum preloading soft foundation treatment, analyze the reason why the expected effect has not been reached in the construction of vacuum preloading soft foundation treatment, propose the detailed resolution and relevant technical measures against the above case, which will provide the reference for similar soft foundation treatment construction.%基于目前天津港常用的真空预压软土地基处理技术,介绍常规真空预压法与直排式真空预压法软土地基处理的施工工艺,着重分析真空预压软土地基处理施工过程中未达预期效果的原因,有针对性地提出解决办法和相应的技术措施,可为类似软土地基处理工程的施工提供参考.

  8. Analysis Technology of Local Fracture Behavior Based on Finite Element Method

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Yoon Suk; Lee, Sang Min; Lee, Tae Rin; Ko, Han Ok; Kim, Jong Min; Choi, Shin Beom [Sungkyunkwan Univ., Seoul (Korea, Republic of)

    2007-03-15

    The scatter of measured fracture toughness data and transferability problems among different crack configurations and loading conditions are major obstacles for application of fracture mechanics. To address these issues, recently, concerns for local approach adopting micro-mechanical damage models are being increased again in connection with a progress of computational technology. In the present research, assessment of both cleavage fracture based on Weibull statistics and ductile fracture based on GTN(Gurson-Tvergaard-Needleman) as well as Rousselier models was carried out. A series of three dimensional finite element analyses and corresponding fracture toughness tests were performed for SP(Small Punch), CT(Compact Tension) and PCVN(Pre-Cracked V-Notched) specimens. Then, failure probability analysis under three different temperatures and fracture resistance curve estimation for diverse materials have been conducted. Finally, promising results were derived through comparison between measured and predicted data. It is anticipated that the resulting cleavage fracture evaluation procedure based on the maximum likelihood method, prototype of toughness scale diagram and ductile fracture evaluation procedure using the SP specimen can be utilized to make the basis for demonstrating realistic safety margins of nuclear components containing defect.

  9. Relative information at the foundation of physics

    CERN Document Server

    Rovelli, Carlo

    2013-01-01

    Shannon's notion of relative information between two physical systems can function as foundation for statistical mechanics and quantum mechanics, without referring to subjectivism or idealism. It can also represent a key missing element in the foundation of the naturalistic picture of the world, providing the conceptual tool for dealing with its apparent limitations. I comment on the relation between these ideas and Democritus.

  10. Atmospheric deposition of rare earth elements in Albania studied by the moss biomonitoring technique, neutron activation analysis and GIS technology.

    Science.gov (United States)

    Allajbeu, Sh; Yushin, N S; Qarri, F; Duliu, O G; Lazo, P; Frontasyeva, M V

    2016-07-01

    Rare earth elements (REEs) are typically conservative elements that are scarcely derived from anthropogenic sources. The mobilization of REEs in the environment requires the monitoring of these elements in environmental matrices, in which they are present at trace level. The determination of 11 REEs in carpet-forming moss species (Hypnum cupressiforme) collected from 44 sampling sites over the whole territory of the country were done by using epithermal neutron activation analysis (ENAA) at IBR-2 fast pulsed reactor in Dubna. This paper is focused on REEs (lanthanides) and Sc. Fe as typical consistent element and Th that appeared good correlations between the elements of lanthanides are included in this paper. Th, Sc, and REEs were never previously determined in the air deposition of Albania. Descriptive statistics were used for data treatment using MINITAB 17 software package. The median values of the elements under investigation were compared with those of the neighboring countries such as Bulgaria, Macedonia, Romania, and Serbia, as well as Norway which is selected as a clean area. Geographical distribution maps of the elements over the sampled territory were constructed using geographic information system (GIS) technology. Geochemical behavior of REEs in moss samples has been studied by using the ternary diagram of Sc-La-Th, Spider diagrams and multivariate analysis. It was revealed that the accumulation of REEs in current mosses is associated with the wind-blowing metal-enriched soils that is pointed out as the main emitting factor of the elements under investigation.

  11. Information technology - Telecommunications and information exchange between systems - Elements of management information related to OSI transport layer standards; Amendment 1: NCMS Management; Technical Corrigendum 1

    CERN Document Server

    International Organization for Standardization. Geneva

    1994-01-01

    Information technology - Telecommunications and information exchange between systems - Elements of management information related to OSI transport layer standards; Amendment 1: NCMS Management; Technical Corrigendum 1

  12. Fraction Sense: Foundational Understandings.

    Science.gov (United States)

    Fennell, Francis Skip; Karp, Karen

    2016-08-09

    The intent of this commentary is to identify elements of fraction sense and note how the research studies provided in this special issue, in related but somewhat different ways, validate the importance of such understandings. Proficiency with fractions serves as a prerequisite for student success in higher level mathematics, as well as serving as a gateway to many occupations and varied contexts beyond the mathematics classroom. Fraction sense is developed through instructional opportunities involving fraction equivalence and magnitude, comparing and ordering fractions, using fraction benchmarks, and computational estimation. Such foundations are then extended to operations involving fractions and decimals and applications involving proportional reasoning. These components of fraction sense are all addressed in the studies provided in this issue, with particular consideration devoted to the significant importance of the use of the number line as a central representational tool for conceptually understanding fraction magnitude.

  13. The Danish Industrial Foundations

    DEFF Research Database (Denmark)

    Thomsen, Steen

    Industrial foundations are foundations that own companies. Typically, they combine charitable and business goals. This book is about industrial foundation ownership of business companies and what we can learn about it from the Danish evidence. It is about how foundation ownership is ruled, taxed...... and governed, what role it plays in the Danish economy, and how industrial foundation-owned companies perform. The book is the result of a large collaborative research project, led by the author, on industrial foundations. Some global companies such as IKEA, Robert Bosch or the Tata Group are foundation...

  14. Parallel computing analysis of arch dam and foundation system using 3-D FEM with element-by-element approach%拱坝-地基系统的三维有限元并行计算

    Institute of Scientific and Technical Information of China (English)

    刘耀儒; 周维垣; 刘福深; 强天驰

    2005-01-01

    拱坝稳定和破坏过程的三维有限元分析,对高性能并行计算提出了很高的要求.采用节点联系矩阵的概念,基于Jacobi预处理共轭梯度法,推导了适用于分布存储并行机的有限元并行element-by-element(EBE)方法,可以避免形成整体刚度矩阵,显著减少内存需求,并可自动实现计算任务的分配.编制了有限元并行计算程序,采用悬臂梁算例对其进行了验证,然后应用于二滩拱坝的有限元数值分析.计算结果表明,对拱坝-地基系统这样复杂的三维结构,有限元EBE方法是一种很有效的并行计算方法.

  15. Research on the Technology of Deep Mixing Pile for Soft Foundation Construction%深层搅拌桩处理软基施工工艺研究

    Institute of Scientific and Technical Information of China (English)

    梁毅

    2014-01-01

    Deep mixing is a method in which mixing foundation soil (soil or sand) with curing agent by using deep mixing machines compulsorily to promote the strength of the foundation. The effect is significant for the soft founda-tion treatment,and has high degree of practical function for silt, sandy soil, powder soil and sandy soil. This article introduces the construction process of deep mixing pile in soft foundation and the matching experiment in the soft foundation treatment.%深层搅拌是通过深层搅拌机械将地基土壤(土或者沙)与固化剂强制的拌和,从而提升地基的强度。该方法在对软基的处理上效果十分显著,对于淤泥、砂土泥炭土、粉性土以及砂土的实用度很高。文中将对深层搅拌桩对于软基的施工工艺和在施工过程中配比实验进行介绍和探究。

  16. 曲线组合梁畸变效应的弹性地基梁有限元解法%Finite element solution for curved composite beams with distortional effect based on elastic foundation beam method

    Institute of Scientific and Technical Information of China (English)

    刘玉玲; 张彦玲; 张德莹

    2016-01-01

    为了对曲线组合梁的畸变效应进行研究,针对钢—混凝土曲线组合梁,首先采用M/r法将曲线转化为直梁,然后基于能量变分原理,并考虑钢梁与混凝土板的材料差异,推导了畸变荷载作用下组合梁的畸变控制微分方程。以哈大线某曲线组合梁为计算模型,根据弹性地基梁比拟法,分别采用初参数法和Midas有限元模型对跨中截面的畸变角和畸变双力矩进行了计算。结果表明,在弹性地基梁原理基础上,初参数法和有限元法均可很好地模拟曲线组合梁的畸变效应。%In order to analyze the distortion effect of curved composite beams, a curved steel-con-crete composite beam was simulated as an equivalent straight one by the M/r method. Based on the energy-variational principle, and considering material difference between the concrete slab and steel girder, the distortional governing differential equation for the composite beam was deduced. A curved composite beam in Harbin-Dalian railway was selected as a computational example. Based on the elastic foundation beam analogy method, the distortional angle and bi-moment were obtained by the initial parameter method and the finite element method, respectively. The results indicate that, based on the elastic foundation beam analogy method, and simulating the curved composite beam to an equivalent straight one by the M/r method, both the initial parameter method and the finite ele-ment method can satisfyingly deduce the distortion effect of the curved composed beam.

  17. The level of toxic and essential trace elements in hair of petrochemical workers involved in different technological processes.

    Science.gov (United States)

    Skalny, Anatoly V; Kaminskaya, Galina A; Krekesheva, Tatyana I; Abikenova, Sholpan K; Skalnaya, Margarita G; Berezkina, Elena S; Grabeklis, Andrei R; Tinkov, Alexey A

    2017-02-01

    The objective of the investigation is comparative analysis of hair trace element content in workers of different departments of petrochemical plant. A total of 75 men working in office (engineers), and departments 1 (D1), 3 (D3), and 4 (D4) of the petrochemical plant, as well as occupationally non-exposed persons, were examined. Hair trace element levels were analyzed using inductively coupled plasma mass spectrometry. The office workers were characterized by the highest hair As, Hg, Sn, I, and Si content as compared to the workers of other departments, whereas the level of those elements did not differ significantly from the control values. It is notable that hair Be levels in all employees of petrochemical plant were significantly lower, whereas Se content was significantly higher than that in unexposed controls. Hair toxic trace element content in workers directly involved in industrial processes did not differ significantly or was lower than that in the control group. At the same time, the highest levels of essential trace elements (Cr, Fe, and I) were observed in employees working in primary oil refining (D1). Hair levels of Co, I, and Li were maximal in persons of sulfur and bitumen-producing division (D4). The lowest levels of both essential and toxic trace elements in hair were detected in employees involved in production of liquefied gas, kerosene, and diesel fuel (D3). The obtained data demonstrate that involvement in different technological processes in petrochemical complex differentially affect hair trace element content in workers.

  18. ITIL Foundation exam study guide

    CERN Document Server

    Gallacher, Liz

    2012-01-01

    Everything you need to prepare for the ITIL exam The ITIL (Information Technology Infrastructure Library) exam is the ultimate certification for IT service management. This essential resource is a complete guide to preparing for the ITIL Foundation exam and includes everything you need for success. Organized around the ITIL Foundation syllabus, the study guide addresses the ITIL Service Lifecycles, the ITIL processes, roles, and functions, and also thoroughly explains how the Service Lifecycle provides effective and efficient IT services. Offers an introduction to IT service management and ITI

  19. Technology for Excavation of Deep Foundation Pit under Condition of Close Range Bias Voltage%近距离深基坑偏压状态下的开挖技术

    Institute of Scientific and Technical Information of China (English)

    曹俊

    2014-01-01

    结合工程实例,介绍了A、B两个近距离相邻深基坑的开挖技术。在A基坑已开挖后,B基坑两侧受坑外水土压力不平衡的状态下,通过采取更换支撑形式、加固夹缝土体等技术措施,结合信息化监测手段,实现基坑的安全开挖及周边环境、管线的安全,为类似工程提供了借鉴。%Combined with the engineering example, the article introduces excavation technology of A, B two close range adjacent deep foundation pit. After excavation of the A foundation pit, water pressure on each side of the B foundation pit is unbalanced. Through technical measures such as replacing the sup⁃porting form, reinforcement of soil crack, and so on, combined with the information monitoring method, it realizes the safety excavation of foundation pit, and the safety of the surrounding environment and pipe⁃line, which can provide reference for similar engineering.

  20. The foundation of physicianship.

    Science.gov (United States)

    Fuks, Abraham; Brawer, James; Boudreau, J Donald

    2012-01-01

    Although the practice of medicine continually changes in response to new biomedical understanding, novel technologies, and evolving cultural contexts, the ethical foundations of the clinical relationship between patient and physician paradoxically remain constant. There are fundamental characteristics with respect to character, behavior, and responsibilities that are descriptive of and necessary to the role of healer and that underpin the notion of physicianship. This article discusses the underlying characteristics or virtues that are necessary to the practice of medicine from the perspectives of three different philosophic traditions: the Aristotelian idea of phronesis as developed in the work of Edmund Pellegrino; the notion of alterity as framed by Emmanuel Levinas; and the attributes necessary to healing as laid out in the kabbala.

  1. Neuromorphic elements and systems as the basis for the physical implementation of artificial intelligence technologies

    Science.gov (United States)

    Demin, V. A.; Emelyanov, A. V.; Lapkin, D. A.; Erokhin, V. V.; Kashkarov, P. K.; Kovalchuk, M. V.

    2016-11-01

    The instrumental realization of neuromorphic systems may form the basis of a radically new social and economic setup, redistributing roles between humans and complex technical aggregates. The basic elements of any neuromorphic system are neurons and synapses. New memristive elements based on both organic (polymer) and inorganic materials have been formed, and the possibilities of instrumental implementation of very simple neuromorphic systems with different architectures on the basis of these elements have been demonstrated.

  2. Contact finite element analysis between steel and concrete in wind turbine foundation%风机基础中钢-混凝土间的接触有限元模拟

    Institute of Scientific and Technical Information of China (English)

    王超飞; 霍治澎; 魏弦

    2014-01-01

    Simulation and analysis about trim size simplified model of wind turbine foundation were con-ducted by using general finite element analysis ( FEA ) program ANSYS .Surface-to-surface contact pair was built to simulate the contact function between steel and concrete .The bond-slip property between steel and concrete was studied .Load transfer mechanism and strain distribution of the models were analysed .The nu-merical simulation results were in good agreement with the experimental results .According to this , the finite element model established and analysis results can provide a theoretical reference for later research , and can be used for practical analysis in engineering .%运用通用有限元软件ANSYS对风机基础的缩尺简化模型试验进行了模拟与分析,采用面面接触对模拟基础环钢板与混凝土的接触作用,对其内部钢-混凝土的滑移粘结等性能进行了研究,分析了试验模型的传力机理和应变分布特征,确定出合理的库伦摩擦本构的静摩擦系数,有限元计算结果与试验曲线吻合较好,可为风机基础实体模型的理论研究和工程实际分析提供依据。

  3. “Patenting Bioprinting Technologies in the US and Europe– The 5th element in the 3rd dimension"

    DEFF Research Database (Denmark)

    Minssen, Timo; Mimler, Marc

    2017-01-01

    of bioprinting- inventions are being patented or would be- protectable under European and US patent laws. Rather than focusing on the highly relevant questions that 3D printing poses for patent infringement doctrines and research exemptions , this paper concentrates on the question of patentable subject matter......, “Patenting Bioprinting Technologies in the US and Europe– The 5th element in the 3rd dimension", Working Paper, forthcoming in: RM Ballardini, M Norrgård & J Partanen (red), 3D printing, Intellectual Property and Innovation – Insights from Law and Technology. Wolters Klu. Available at https...

  4. “Patenting Bioprinting Technologies in the US and Europe– The 5th element in the 3rd dimension"

    DEFF Research Database (Denmark)

    Minssen, Timo; Mimler, Marc

    2017-01-01

    of bioprinting- inventions are being patented or would be- protectable under European and US patent laws. Rather than focusing on the highly relevant questions that 3D printing poses for patent infringement doctrines and research exemptions , this paper concentrates on the question of patentable subject matter......, “Patenting Bioprinting Technologies in the US and Europe– The 5th element in the 3rd dimension", Working Paper, forthcoming in: RM Ballardini, M Norrgård & J Partanen (red), 3D printing, Intellectual Property and Innovation – Insights from Law and Technology. Wolters Klu. Available at SSRN: https://ssrn.com/abstract=...

  5. Study status of vacuum preloading soft-soil foundation reinforcing theory and technology%真空预压软土地基加固理论和技术研究现状

    Institute of Scientific and Technical Information of China (English)

    王成保; 苌宽; 张玉国

    2016-01-01

    The paper introduces basic working principles of vacuum preloading method,discusses research status of vacuum preloading soft-soil foundation reinforcing theory and construction technology,analyzes problems existing in vacuum preloading soft-soil foundation construction,and finally points out that:the combination of vacuum preloading technology,monitoring technology and information constructing technology will be good for realizing whole-process construction monitoring,so as to improve social and economic benefits of the project.%介绍了真空预压法的基本工作原理,论述了真空预压软土地基加固理论及施工工艺的研究现状,分析了真空预压软土地基施工中存在的问题,指出将真空预压工艺、监测技术与信息化施工技术相结合,有助于实现施工过程的全面监测,从而提高工程的社会经济效益.

  6. Application of fluidic lens technology to an adaptive holographic optical element see-through autophoropter

    Science.gov (United States)

    Chancy, Carl H.

    A device for performing an objective eye exam has been developed to automatically determine ophthalmic prescriptions. The closed loop fluidic auto-phoropter has been designed, modeled, fabricated and tested for the automatic measurement and correction of a patient's prescriptions. The adaptive phoropter is designed through the combination of a spherical-powered fluidic lens and two cylindrical fluidic lenses that are orientated 45o relative to each other. In addition, the system incorporates Shack-Hartmann wavefront sensing technology to identify the eye's wavefront error and corresponding prescription. Using the wavefront error information, the fluidic auto-phoropter nulls the eye's lower order wavefront error by applying the appropriate volumes to the fluidic lenses. The combination of the Shack-Hartmann wavefront sensor the fluidic auto-phoropter allows for the identification and control of spherical refractive error, as well as cylinder error and axis; thus, creating a truly automated refractometer and corrective system. The fluidic auto-phoropter is capable of correcting defocus error ranging from -20D to 20D and astigmatism from -10D to 10D. The transmissive see-through design allows for the observation of natural scenes through the system at varying object planes with no additional imaging optics in the patient's line of sight. In this research, two generations of the fluidic auto-phoropter are designed and tested; the first generation uses traditional glass optics for the measurement channel. The second generation of the fluidic auto-phoropter takes advantage of the progress in the development of holographic optical elements (HOEs) to replace all the traditional glass optics. The addition of the HOEs has enabled the development of a more compact, inexpensive and easily reproducible system without compromising its performance. Additionally, the fluidic lenses were tested during a National Aeronautics Space Administration (NASA) parabolic flight campaign, to

  7. Kessler Foundation Research Center

    Science.gov (United States)

    ... you, Kessler Foundation researchers have been studying wearable robotic exoskeletons in people with paralysis and weakness, and ... info@kesslerfoundation.org Kessler Foundation 2015 © | accessibility statement | careers | privacy policy | press releases

  8. American Hospice Foundation

    Science.gov (United States)

    American Hospice Foundation Skip to content Home Caregiving Learning About Hospice Grief Grieving Children Grief at School Grief at ... for all who come after us. The American Hospice Foundation (AHF) closed its doors in June 2014. ...

  9. Pediatric Brain Tumor Foundation

    Science.gov (United States)

    ... you insights into your child's treatment. LEARN MORE Brain tumors and their treatment can be deadly so ... Cancer Foundation joins the PBTF Read more >> Pediatric Brain Tumor Foundation 302 Ridgefield Court, Asheville, NC 28806 ...

  10. Cooley's Anemia Foundation

    Science.gov (United States)

    ... role in their lives. Welcome to the Cooley's Anemia Foundation Website The Cooley's Anemia Foundation is dedicated to serving people afflicted with ... major form of this genetic blood disease, Cooley's anemia/thalassemia major. Our mission is advancing the treatment ...

  11. Foundation for Sarcoidosis Research

    Science.gov (United States)

    ... a Clinical Trial Our mission is to stop sarcoidosis — join us. The sarcoidosis community needs your help ... receive periodic emails from the Foundation. Foundation For Sarcoidosis Research 1820 W. Webster Ave., Ste 304 Chicago, ...

  12. American Vitiligo Research Foundation

    Science.gov (United States)

    ... life can acquire vitiligo Welcome to The American Vitiligo Foundation 2017 AVRF Calendars Order your calendar with ... animal testing. Please Visit Our Donations Page American Vitiligo Research Foundation "We Walk By Faith, Not By ...

  13. Skin Cancer Foundation

    Science.gov (United States)

    ... Host a Fundraising Event | About Us | Store The Skin Cancer Foundation The Skin Cancer Foundation is the only ... Handbook A "Sunscreen Gene"? Skin Cancer Facts & Statistics Skin Cancer Treatment Glossary Information on medications and procedures The ...

  14. Toxicology Education Foundation

    Science.gov (United States)

    ... bodies and our world. Welcome to the Toxicology Education Foundation! Our mission is to enhance public understanding ... In with us, follow our Tweets, choose Toxicology Education Foundation as your preferred charity through Smile.Amazon. ...

  15. 基于复杂工况下深基坑工程施工与监测技术的应用%Application of the Deep Foundation Pit Engineering Construction and Monitoring Technology in Complex Conditions

    Institute of Scientific and Technical Information of China (English)

    黄华辉

    2013-01-01

    This paper taking Fuzhou Zhongsheng building pr-oject as the carrier, through the analysis of deep foundation pit excavation and lining construction technology exposition and monitoring data, showing a deformation monitoring project in construction of foundation pit, summarizes the dialectical rela-tion of deep foundation pit, excavation, construction and moni-toring of deep foundation pit in the construction of deep found-ation pit. We must combine the three organical y, to achieve the dynamic balance between the three, adopting the informat-ion construction management, to achieve the best economic and social benefits.%  本文以福州中盛大厦工程为载体,通过对深基坑支护与开挖施工关键技术的阐述以及监测数据的分析,呈现出在基坑施工过程中各监测项目的变形规律,总结了在深基坑工程施工中,深基坑支护施工、开挖施工、与深基坑监测作业三者存在辩证的关系。必须将三者有机结合,实现三者的动态平衡,采取信息化施工管理,才能取得最佳的经济效益和社会效益。

  16. Elasto-plastic p-y model and incremental finite element method for beams on nonlinear foundation%弹塑性p—Y模型及非线性地基梁的增量有限元法

    Institute of Scientific and Technical Information of China (English)

    苏栋

    2012-01-01

    The p-y curve method is one of the most commonly used approaches in the analysis and design of piles under horizontal loadings. A p-y model is proposed within the framework of bounding surface elasto-plastic theory. In comparison with the traditional p-y curves, the model can simulate p-y relationships with different degrees of nonlinearity by choosing appropriate values for the model parameters, and can also simulate the soil-pile interaction under cyclic loadings. By adopting the incremental finite element method for beams on nonlinear foundation incorporating the proposed elasto-plastic p-y model, a finite element program is formulated. Soil-pile systems in the field or in the laboratory tests under monotonic or cyclic horizontal loadings are analyzed by use of the finite element program. By comparing the calculated and measured results, the capacity of the method and the proposed elasto-plastic p-y model in modeling the nonlinear response of the piles is demonstrated.%在水平受荷桩基的分析与计算中,P—Y曲线法是应用较为广泛的方法之一。在边界面弹塑性理论的框架内,建立了一个P—Y模型。与传统的P—Y曲线比较,该模型能通过不同的参数取值,模拟不同非线性特性的P—Y关系,并能模拟往复荷载作用下的桩土相互作用。同时采用非线性地基梁的增量有限元法,结合提出的弹塑性P—Y模型,编制了有限元分析程序,对单调和往复水平荷载作用下的桩土系统进行实例分析,结果表明该方法能有效的模拟水平荷载作用下的桩基非线性响应。

  17. Planning of designing and installation of mechanical elements at the gear speed reducer on the basis of the parameter technology

    Directory of Open Access Journals (Sweden)

    D. Letić

    2013-01-01

    Full Text Available The development and implementation of the computer methods at project managing in the part of the planning of designing and installation of mechanical elements with the fit (assembly block of the gear speed reducer is significant and at present irreplaceable engineering task if it has been realized by the modern parameter technology. There are multifunction uses of this organized group of activities, beginning from the quick changeability of elements still in the phase of designing and constructing, thanks to the characteristics of their associativity, still to the wide basis of standard elements that are incorporated in the very program package. Meanwhile, these activities are not simple, so their realization has to be planned from the stand - point of time, resource and cost of realization. For the very designing and constructing was used AutoCAD Mechanical, and for the design managing Microsoft Project.

  18. Creating a Test Validated Structural Dynamic Finite Element Model of the Multi-Utility Technology Test Bed Aircraft

    Science.gov (United States)

    Pak, Chan-Gi; Truong, Samson S.

    2014-01-01

    Small modeling errors in the finite element model will eventually induce errors in the structural flexibility and mass, thus propagating into unpredictable errors in the unsteady aerodynamics and the control law design. One of the primary objectives of Multi Utility Technology Test Bed, X-56A, aircraft is the flight demonstration of active flutter suppression, and therefore in this study, the identification of the primary and secondary modes for the structural model tuning based on the flutter analysis of X-56A. The ground vibration test validated structural dynamic finite element model of the X-56A is created in this study. The structural dynamic finite element model of the X-56A is improved using a model tuning tool. In this study, two different weight configurations of the X-56A have been improved in a single optimization run.

  19. 后装可拆式钢抱箍桩柱塔式起重机基础施工技术%Construction Technology of Tower Crane Foundation with Afterinstallation Detachable Steel Embrace Loop Pile

    Institute of Scientific and Technical Information of China (English)

    陆建飞; 刘建平; 张旭洪

    2012-01-01

    桩柱钢抱箍式混凝土承台塔式起重机基础是一种新型塔式起重机基础结构体系.它是由混凝土承台、钻孔灌注桩和桩身的后装钢抱箍组成的塔式起重机基础结构,和钢管桩塔式起重机基础类似,该塔式起重机基础不仅可为土方开挖和混凝土底板浇筑提供垂直和水平运输的机械,而且还可以加大塔式起重机的工作半径,从而节省工期、提高工效.除此之外,该施工技术在施工方面却更为简单,设计更加合理,还具备成本投入低、可循环利用的优势.%Concrete pile cap crane foundation with steel embrace loop pile is a new type of crane foundation structural system. It consists of concrete pile cap, screw holes filling pile and the steel embrace hoop on pile shaft. Similar to steel pipe piles crane foundation, this crane foundation structural system not only can provide vertical and horizontal transportation machinery for casting concrete slabs and soil excavation, but also can increase the work radius of crane tower, which results less construction time and higher efficiency. Compared with other construction technologies, the construction technology is featured by simpler operation,more reasonable design. It also obtains the advantages of as low cost and recyclable.

  20. 浅水软地基海区桶形基础平台的沉贯技术%Penetration technology for bucket foundation platforms in sea with shallow water and soft groumd/

    Institute of Scientific and Technical Information of China (English)

    初新杰

    2011-01-01

    In order to utilize buck foundation platforms for oil extraction in liaodong Bay of Bohai Sea, the technical scheme of anti- scour and inclination adjustment for the bucket foundation platforms was formulated based on the mechanism of negative pressure installation according to its hydrogeological conditions. The suction penetration tests and static force penetration tests were carried out in laboratory. The pumping modules for the suction penetration were designed. The suction installation technology was successfully applied in the JZ9-3W bucket foundation platform so as to provide a set of repeatable pumping module and suction installation technology for buck foundation platforms in shallow water area with weak soft ground and serious seabed scour.%为了在渤海辽东湾海域应用桶形基础采油平台,针对该海域水文地质状况,在负压安装机理研究的基础上制定了桶形基础防冲淘、平台沉贯整体倾斜调整的技术方案,开展室内负压沉贯与静力压贯试验,设计了负压沉贯抽吸泵组模块,并成功应用于JZ9-3W桶形基础平台的海上安装,为在表层地基软弱、海底冲淘严重的浅水区安装桶形基础平台提供了一套可重复利用的抽吸泵组模块和负压安装技术.

  1. Definition, technology readiness, and development cost of the orbit transfer vehicle engine integrated control and health monitoring system elements

    Science.gov (United States)

    Cannon, I.; Balcer, S.; Cochran, M.; Klop, J.; Peterson, S.

    1991-01-01

    An Integrated Control and Health Monitoring (ICHM) system was conceived for use on a 20 Klb thrust baseline Orbit Transfer Vehicle (OTV) engine. Considered for space used, the ICHM was defined for reusability requirements for an OTV engine service free life of 20 missions, with 100 starts and a total engine operational time of 4 hours. Functions were derived by flowing down requirements from NASA guidelines, previous OTV engine or ICHM documents, and related contracts. The elements of an ICHM were identified and listed, and these elements were described in sufficient detail to allow estimation of their technology readiness levels. These elements were assessed in terms of technology readiness level, and supporting rationale for these assessments presented. The remaining cost for development of a minimal ICHM system to technology readiness level 6 was estimated. The estimates are within an accuracy range of minus/plus 20 percent. The cost estimates cover what is needed to prepare an ICHM system for use on a focussed testbed for an expander cycle engine, excluding support to the actual test firings.

  2. Maintaining Continuity of Knowledge (CoK) of Spent Fuel Pools: Tool Survey - Scenarios, Technology Considerations, and Evaluation Criteria

    Energy Technology Data Exchange (ETDEWEB)

    Benz, Jacob M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tanner, Jennifer E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smart, Heidi A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); MacDougall, Matthew R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-01-18

    The objective of this report is to identify the foundational elements which will drive the survey and evaluation of potential technologies to be considered to maintain CoK of spent fuel within a pool in the potential absence of light or in low light scenarios. These foundational elements include identifying use cases that highlight the type of environments in which the technologies may be asked to operate; the CoK elements required of the technologies, such as unique identification or presence/absence identification; the functional and operational requirements for the technologies; and the criteria against which the technologies will be evaluated.

  3. Technology Activities in the Aerodynamics and Hydrodynamics of Propulsion Elements at MSFC (NASA)

    Science.gov (United States)

    Garcia, Roberto

    1999-01-01

    This presentation discusses the work towards a second generation reusable launch vehicle (RLV). The goals of the second generation RLV program are reviewed. These include cost, safety, and propulsion advances. The Fluid dynamics technologies under development are discussed. These include the altitude compensating nozzle technology, the Aerospike plume induced base heating, the inducer testing technology. Pictures of altitude compensating nozzles Aerospike Plume Induced Base Heating results and Inducer testing technologies are included. Further goals of the program are to improve the methodology for optimizing design of the injectors, to improve the optimization of the turbopump and improvement of the methodology to analyze the engine performance. This presentation consists of outline view slides

  4. Technology requirements for an orbiting fuel depot: A necessary element of a space infrastructure

    Science.gov (United States)

    Stubbs, R. M.; Corban, R. R.; Willoughby, A. J.

    1988-01-01

    Advanced planning within NASA has identified several bold space exploration initiatives. The successful implementation of these missions will require a supporting space infrastructure which would include a fuel depot, an orbiting facility to store, transfer and process large quantities of cryogenic fluids. In order to adequately plan the technology development programs required to enable the construction and operation of a fuel depot, a multidisciplinary workshop was convened to assess critical technologies and their state of maturity. Since technology requirements depend strongly on the depot design assumptions, several depot concepts are presented with their effect on criticality ratings. Over 70 depot-related technology areas are addressed.

  5. Technology requirements for an orbiting fuel depot - A necessary element of a space infrastructure

    Science.gov (United States)

    Stubbs, R. M.; Corban, R. R.; Willoughby, A. J.

    1988-01-01

    Advanced planning within NASA has identified several bold space exploration initiatives. The successful implementation of these missions will require a supporting space infrastructure which would include a fuel depot, an orbiting facility to store, transfer and process large quantities of cryogenic fluids. In order to adequately plan the technology development programs required to enable the construction and operation of a fuel depot, a multidisciplinary workshop was convened to assess critical technologies and their state of maturity. Since technology requirements depend strongly on the depot design assumptions, several depot concepts are presented with their effect of criticality ratings. Over 70 depot-related technology areas are addressed.

  6. Recapturing Graphite-Based Fuel Element Technology for Nuclear Thermal Propulsion

    Energy Technology Data Exchange (ETDEWEB)

    Trammell, Michael P [ORNL; Jolly, Brian C [ORNL; Miller, James Henry [ORNL; Qualls, A L [ORNL; Harrison, Thomas J [ORNL

    2013-01-01

    ORNL is currently recapturing graphite based fuel forms for Nuclear Thermal Propulsion (NTP). This effort involves research and development on materials selection, extrusion, and coating processes to produce fuel elements representative of historical ROVER and NERVA fuel. Initially, lab scale specimens were fabricated using surrogate oxides to develop processing parameters that could be applied to full length NTP fuel elements. Progress toward understanding the effect of these processing parameters on surrogate fuel microstructure is presented.

  7. The Monopod Bucket Foundation

    DEFF Research Database (Denmark)

    Bakmar, Christian LeBlanc; Ahle, Kim; Nielsen, Søren A.;

    2009-01-01

    Following the successful installation of a prototype of a monopod bucket foundation, also called a “monopod suction caisson”, at Horns Rev 2 Offshore Wind Farm, Denmark, in 2009, DONG Energy is currently developing a commercialization strategy. The monopod bucket foundation is a promising...... foundation concept for offshore wind turbines and can be installed using suction assisted penetration, combined with other installation methods. This selfinstalling foundation concept, may avoid the use of expensive jack-ups and scour protection, and thus significantly reduces installation costs. However......, further research, development and prototype testing are required, before the monopod bucket foundation can be commercialized....

  8. Environmental Foundations in Germany

    Directory of Open Access Journals (Sweden)

    Thomas Krikser

    2015-05-01

    Full Text Available Foundations in Germany were examined in the context of environmental issues. Data from environmental foundations show that there is huge difference between private and public foundations concerning financial settings. Furthermore, environment is often not the only objective and sometimes not even processed. Our analysis shows that there are different types of foundations with regard to environmental scopes and activities. Although “attractive topics” such as biodiversity and landscape conservation seem to be more important to foundations, less visible topics such as pollution prevention remain merely a “blind spot.” Together, these findings suggest that there is only a limited potential of private foundations compared with public foundations. Nevertheless, there might be an impact on environmental awareness and local sustainability.

  9. Three dimensional periodic foundations for base seismic isolation

    Science.gov (United States)

    Yan, Y.; Cheng, Z.; Menq, F.; Mo, Y. L.; Tang, Y.; Shi, Z.

    2015-07-01

    Based on the concept of phononic crystals, periodic foundations made of periodic materials are investigated in this paper. The periodic foundations can provide low frequency band gaps, which cover the main frequency ranges of seismic waves. Therefore, the periodic foundations are able to protect the upper structures during earthquake events. In this paper, the basic theory of three dimensional periodic foundations is studied and the finite element method was used to conduct the sensitivity study. A simplified three-dimensional periodic foundation with a superstructure was tested in the field and the feasibility of three dimensional periodic foundations was proved. The test results showed that the response of the upper structure with the three dimensional periodic foundation was reduced under excitation waves with the main frequency falling in the attenuation zones. The finite element analysis results are consistent with the experimental data, indicating that three dimensional periodic foundations are a feasible way of reducing seismic vibrations.

  10. Cognitive Foundations for Visual Analytics

    Energy Technology Data Exchange (ETDEWEB)

    Greitzer, Frank L.; Noonan, Christine F.; Franklin, Lyndsey

    2011-02-25

    In this report, we provide an overview of scientific/technical literature on information visualization and VA. Topics discussed include an update and overview of the extensive literature search conducted for this study, the nature and purpose of the field, major research thrusts, and scientific foundations. We review methodologies for evaluating and measuring the impact of VA technologies as well as taxonomies that have been proposed for various purposes to support the VA community. A cognitive science perspective underlies each of these discussions.

  11. NATO Advanced Study Institute on Fundamental and Technological Aspects of Organo-f-Element Chemistry

    CERN Document Server

    Fragalà, Ignazio

    1985-01-01

    The past decade has seen a dramatic acceleration of activity and interest in phenomena surrounding lanthanide and actinide organo­ metallic compounds. Around the world, active research in organo-f­ element synthesis, chemistry, catalysis, crystallography, and quantum chemistry is in progress. This activity has spanned a remarkably wide range of disciplines, from synthetic/mechanistic inorganic and organic chemistry to radiochemistry, catalytic chemistry, spectroscopy (vibra­ tional, optical, magnetic resonance, photoelectron, Mossbauer), X-ray and neutron diffraction structural analysis, as well as to crystal field and molecular orbital theoretical studies at the interface of chemistry and physics. These investigations have been motivated both by fundamental and applied goals. The evidence that f-element organo­ metallic compounds have unique chemical and physical properties which cannot be duplicated by organometallic compounds of d-block elements has suggested many new areas of endeavor and application....

  12. Effects of welding technology on welding stress based on the finite element method

    Science.gov (United States)

    Fu, Jianke; Jin, Jun

    2017-01-01

    Finite element method is used to simulate the welding process under four different conditions of welding flat butt joints. Welding seams are simulated with birth and death elements. The size and distribution of welding residual stress is obtained in the four kinds of welding conditions by Q345 manganese steel plate butt joint of the work piece. The results shown that when using two-layers welding,the longitudinal and transverse residual stress were reduced;When welding from Middle to both sides,the residual stress distribution will change,and the residual stress in the middle of the work piece was reduced.

  13. Management Technology for Deep Foundation Pit Monitoring in Soil Geological Subway Station%软土地质地铁深基坑监测管理技术

    Institute of Scientific and Technical Information of China (English)

    马洪杰

    2016-01-01

    现代化城市的规模持续发展扩大,城市人口及交通流量急速增加,出行问题已成为制约发展的瓶颈。为改善城市拥堵状况,公共轨道交通建设蓬勃发展,尤其是地铁工程建设迎来了高峰期。在地铁建设过程中,由于深基坑施工地质情况多变,周边环境复杂,地铁施工的安全存在隐患。为确保深基坑施工的安全,深基坑监测是必要的手段和措施。通过科学合理的监测方法,随时了解基坑的变形情况和变化趋势,对可能存在的风险及时预警,从而保证地铁工程的顺利实施。%With the expansion of the scale of modern cities,the urban population and the rapid increase of traffic flow, travel problems have become the bottleneck of urban development.In order to improve the congestion of the city,rapid de-velopment of urban rail transit construction,especially the construction of subway project has ushered in the peak period.In the process of subway construction,due to the changing geological conditions of deep foundation pit construction,complex surrounding environment,there are hidden dangers in the safety of subway construction.To ensure the safety of deep foun-dation pit construction,foundation pit monitoring is a necessary means and measures.Through scientific and reasonable monitoring method,understanding of the deformation and change trend of foundation pit at any time,and early warning of possible risks,the smooth implementation of the subway project is ensured.

  14. Advanced Manufacturing Technologies (AMT): Low Cost Upper Stage-Class Propulsion Development Element

    Data.gov (United States)

    National Aeronautics and Space Administration — As manufacturing technologies have matured, it now appears possible to build all the major components and subsystems of an upper stage-class rocket engine for...

  15. Application of prestressed structural elements in the erection of heavy viscoelastic arched structures with the use of an additive technology

    Science.gov (United States)

    Manzhirov, A. V.; Parshin, D. A.

    2016-11-01

    The process of erection an object under the action of gravity forces in the absence of additional loads is studied together with the technology of application of prestressed structure elements. The mathematically two-dimensional engineering problem of mechanics of gradual building of a heavy semicircular vault from a prestressed viscoelastic homogeneously aging material is solved analytically. The vault fixation on a rigid horizontal base by sliding fixation, which ensures continuous smooth contact between the vault foot and the base, is considered. The performed computations permit demonstrating high efficiency of preliminary stress creation in the material elements added to the vault in the process of its building in order to control its technological stress state. It is shown that this measure permits significantly decreasing the final values of the separating contact stresses on the foot of the built vault and obtaining the final state of the whole structure which is safer with respect to the level of tensile stresses than that obtain by using unstressed elements.

  16. Buckling of Bucket Foundations During Installation

    DEFF Research Database (Denmark)

    Madsen, Søren

    in order to reduce the cost of energy. This limits the on land application due to transportation limitations and unwillingness from prospect neighbours. Thus, offshore wind energy started developing over the last couple of years. Although installing the wind turbines offshore resolves the before men tioned...... issues, it brings up the cost of energy mainly due to increased installation and maintenance costs. A very large part—up to 30–50% using current technology—of the installation cost origins from the expenses related to the installation of foundations. A new foundation concept—the bucket foundation...... the suction assisted installation process. In this thesis, the phenomenon of buckling of the bucket foundation during installation is investigated by means of Finite Element Analysis. The influence of boundary conditions on the bucket foundation is adressed as well as the effect of including the surrounding...

  17. 复杂地质和地形环境下的基坑支护技术%SUPPORT TECHNOLOGY OF FOUNDATION EXCAVATION UNDER COMPLEX GEOLOGICAL AND TOPOGRAPHICAL CONDITIONS

    Institute of Scientific and Technical Information of China (English)

    陈安生; 黄国良

    2011-01-01

    某建筑的基坑工程开挖面积大,开挖范围内土层分布差异大,地质情况复杂,周边邻近建筑物、市政道路和斜山坡地等环境不同。根据场地条件,基坑采用7个代表性支护剖面进行联合支护,支护结构既切实际又经济合理;分析基坑施工面临挖孔桩流泥、排桩间塌陷、长边效应、斜山坡加固和防空洞等施工难点,并且制定相应的解决措施;通过开展基坑施工安全监测,有效地实施信息化设计与施工,保证了基坑和周边环境的安全。%Foundation excavation of a construction has a large area excavation,large differences within the soil layer,complex geological conditions,the surroundings being adjacent to buildings,urban roads,ramp slopes,and other different environments.According to the conditions of site,foundation excavation support is divided into seven representative profile to joint support,the support structure is both realistic and economically rational.It is analyzed the construction difficulties such as doing an excavation facing the flow of mud pile,collapse between piles,long side effects,hillside reinforcement and the existing shelter etc;and the corresponding measures are worked out.By carring out safety monitoring of foundation excavation construction,using informational design and constructional technology,the safety of foundation excavation and the surrounding environment is ensured.

  18. Foundation Excavation Technology of Inlet/Outlet of Lower Reservoir in Xianju Pumped-storage Power Station%仙居抽水蓄能电站下水库进出水口基坑开挖技术

    Institute of Scientific and Technical Information of China (English)

    贾群超; 卢瑶; 陈金

    2014-01-01

    通常情况下,抽水蓄能电站下水库进出水口施工前期,多为静水中填筑土石高围堰,然后在围堰的挡护下进行下水库进出水口基坑施工,由于进出水口基坑狭小,边坡高陡,且周边已建设施较多,同时又受汛期影响,工期紧张。基坑开挖是进水口施工的首要工序,尤为重要,通过对仙居抽水蓄能电站下水库进出水口基坑开挖进行研究,总结了其开挖技术要点。%Under the normal circumstances, at the construction earlier stage of inlet / outlet of lower reservoir in Xianju Pumped-storage Power Station, in the ordinary course, the debris high cofferdam will be filled still in the water. The foundation excavation of inlet / outlet of lower reservoir is constructed under the cofferdam protection. Because of the narrow inlet and outlet foundation excavation, high and steep slope,many surrounding infrastructure facilities,meanwhile combined with the influence of the flood season, the construction period is very tight. The foundation excavation is the first step in the inlet / outlet construction. Through the research of foundation excavation technology of inlet / outlet of lower reservoir in Xianju Pumped-storage Power Station,the excavation key points are summarized.

  19. Kine-Mould: Manufacturing technology for curved architectural elements in concrete

    NARCIS (Netherlands)

    Schipper, H.R.; Eigenraam, P.; Grünewald, S.; Soru, M.; Nap, P.; Van Overveld, B.; Vermeulen, J.

    2015-01-01

    The production of architectural elements with complex geometry is challenging for concrete manufacturers. Computer-numerically-controlled (CNC) milled foam moulds have been applied frequently in the last decades, resulting in good aesthetical performance. However, still the costs are high and a

  20. Modeling fragmentation with new high order finite element technology and node splitting

    Directory of Open Access Journals (Sweden)

    Olovsson Lars

    2015-01-01

    Full Text Available The modeling of fragmentation has historically been linked to the weapons industry where the main goal is to optimize a bomb or to design effective blast shields. Numerical modeling of fragmentation from dynamic loading has traditionally been modeled by legacy finite element solvers that rely on element erosion to model material failure. However this method results in the removal of too much material. This is not realistic as retaining the mass of the structure is critical to modeling the event correctly. We propose a new approach implemented in the IMPETUS AFEA SOLVER® based on the following: New High Order Finite Elements that can easily deal with very large deformations; Stochastic distribution of initial damage that allows for a non homogeneous distribution of fragments; and a Node Splitting Algorithm that allows for material fracture without element erosion that is mesh independent. The approach is evaluated for various materials and scenarios: -Titanium ring electromagnetic compression; Hard steel Taylor bar impact, Fused silica Taylor bar impact, Steel cylinder explosion, The results obtained from the simulations are representative of the failure mechanisms observed experimentally. The main benefit of this approach is good energy conservation (no loss of mass and numerical robustness even in complex situations.

  1. The Confidence and Competence in Information and Communication Technologies of Practitioners, Parents and Young Children in the Early Years Foundation Stage

    Science.gov (United States)

    Aubrey, Carol; Dahl, Sarah

    2014-01-01

    A review of evidence on the use of information and communication technologies (ICT) in the early years was commissioned by the British Educational Communications and Technology Agency. Views of practitioners, parents and children were obtained and practitioner ICT audits completed. Most young children grow up in media-rich digital environments in…

  2. The Development of a Code of Ethics: An Online Classroom Approach to Making Connections between Ethical Foundations and the Challenges Presented by Information Technology

    Science.gov (United States)

    Brooks, Rochelle

    2010-01-01

    In today's organizations, ethical challenges relate to areas like fraud, right to privacy for consumers, social responsibility, and trade restrictions. For Information Technology (IT) specifically, these can translate to considerations on how technology is used to violate people's privacy, how automation leads to job reductions, or how management…

  3. The Confidence and Competence in Information and Communication Technologies of Practitioners, Parents and Young Children in the Early Years Foundation Stage

    Science.gov (United States)

    Aubrey, Carol; Dahl, Sarah

    2014-01-01

    A review of evidence on the use of information and communication technologies (ICT) in the early years was commissioned by the British Educational Communications and Technology Agency. Views of practitioners, parents and children were obtained and practitioner ICT audits completed. Most young children grow up in media-rich digital environments in…

  4. Study of the Relationships between Technological and Productivity Elements that Determine Seed Yield in Birdsfoot Trefoil (Lotus Corniculatus L.

    Directory of Open Access Journals (Sweden)

    Neculai Dragomir

    2011-10-01

    Full Text Available During an experience performed to elaborate an efficient technology of seed production in birdsfoot trefoil, we observed a series of correlations between yield and the elements of productivity, which exert a strong influence on seed quantity. In this viewpoint, the matrix of correlations between the elements of fructification, in the case of the influence exerted by birdsfoot trefoil cultivation method, made evident the following correlation coefficients: r = 0.81**, between the number of pods/plant; r = 0.82**, between the number of generative sprigs and the number of pods/inflorescence; r = 0.98**, between the number of generative sprigs and the number of pods/plant.

  5. The Monopod Bucket Foundation

    DEFF Research Database (Denmark)

    Bakmar, Christian LeBlanc; Ahle, Kim; Nielsen, Søren A.

    2009-01-01

    Following the successful installation of a prototype of a monopod bucket foundation, also called a “monopod suction caisson”, at Horns Rev 2 Offshore Wind Farm, Denmark, in 2009, DONG Energy is currently developing a commercialization strategy. The monopod bucket foundation is a promising...... foundation concept for offshore wind turbines and can be installed using suction assisted penetration, combined with other installation methods. This selfinstalling foundation concept, may avoid the use of expensive jack-ups and scour protection, and thus significantly reduces installation costs. However...

  6. Report on the surveys in fiscal 1999 on foundations for establishing industrial technology strategies. Technological strategies by fields (Field of nurturing human resources in chemical technologies); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Bun'yabetsu senryaku (kagaku gijutsusha jinzai ikusei bun'ya)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper describes nurturing of human resources in chemical technologies, as part of the surveys in fiscal 1999 on foundations for establishing industrial technology strategies. In association with the progress in scientific technologies, convenience of living has been enhanced exceptionally. On the other hand, however, problems lie in a heap, such as in global environment, energy, resources and population. Safety of chemical substances is questioned. Industrial world is greeted with the times of bubble collapse, information orientation, internationalization, and great competition. Chemical industries are aiming at differentiation and power strengthening, but demanded of conversion into making more independent developments. A large number of problems difficult of solving must be overcome by progress of scientific technologies. The core of the progress is in innovation and creation of new chemical technologies. Since what shoulders the requirements is people, nurturing chemical engineers is the urgent and important issue. Chemical engineers are demanded of having knowledge and experience in environment and safety, and ethics to accomplish social responsibilities, not to speak of their specialty technologies. Human resource nurturing must be carried out effectively under collaboration and cooperation of universities and corporations, rather than they do it independently. This paper describes problems and solution ideas, such as institutions and programs, to achieve the goal. (NEDO)

  7. Method of Dehydration of Sewage Sludge Using Elements of GEOTUBE Technology at Bortnichy’s Aeration Station

    Directory of Open Access Journals (Sweden)

    Kashkovsky, V.I.

    2014-01-01

    Full Text Available The work is dedicated to major environmental and social problem — dehydration of sewage sludge with the help of GeoTube technology elements. The process of dehydration dynamics for different sludge origin has developed. The pilot installation has worked out — filter module placed in the tank of Bortnichy’s sewage treatment plant, where the aerobically-stabilized sludge processed with flocculant Praestol 859 BS and water from filtration fields are delivered to. Installation can be used to reduce the workload on sludge fields, for purification of undersludge returning water and de hydration of accumulated sludge.

  8. Pile Foundation Treatment Technology of Shield Tunnel beneath Footbridge%盾构隧道下穿人行天桥桩基处理技术

    Institute of Scientific and Technical Information of China (English)

    张火军

    2013-01-01

      武汉轨道交通4号线某区间盾构隧道穿越人行天桥桩基。在盾构穿越天桥前,必须清除隧道开挖范围内的桩基。在无交通疏解和工期紧的条件下,首先搭设临时支架保护天桥,从地面注浆加固土体,在托换承台后,人工挖竖井从竖井中凿除盾构隧道范围内桩基,同时盾构穿越时调整施工参数。整个施工过程中,天桥正常通行,盾构穿越天桥后,承台最大累计沉降在3 mm以内,保证了天桥的安全和盾构施工工期,到达了预期效果。%Line 4 of Wuhan urban rail transit uses shield tunneling across the pedestrian bridge with pile foundation. Before the shielding crossing the footbridge, piles within tunnel excavation region must be cleared. Under heavy traffic without diversion and with a tight project schedule, temporary support to protect the footbridge is erected, with grouting reinforcing soil from the ground. After supporting and changing the abutment, manual shaft dug from the existing shaft to remove pile foundation in the shield tunnel. At the same time shield adjusts construction parameters while tunneling. Throughout the construction process, the footbridge functions as normal passage. After shield crosses the footbridge, the maximum cumulative settlement of the abutment is less than 3 mm, the footbridge safety and shield construction period are ensured, reaching the expected results.

  9. Academic Use of Social Media Technologies as an Integral Element of Informatics Program Delivery in Malaysia

    Science.gov (United States)

    Lim, Jane See Yin; Harper, Barry; Chicharo, Joe F.

    2014-01-01

    Higher education institutions are currently examining how the current emerging technologies and social media applications can be integrated with the appropriate teaching pedagogies adopted by higher education institutions to provide students with learning experiences that take advantage of these new affordances. Due to the continuous and pervasive…

  10. Bucket foundations under lateral cyclic loading

    DEFF Research Database (Denmark)

    Foglia, Aligi

    -competitive in the energy market. This thesis addresses issues concerning monopod bucket foundations in the hope of providing tools and ideas that could be used to optimize the design of this sub-structure. The work is focussed on the behaviour of bucket foundations under lateral cyclic loading. Other related......To enable a prosperous development of offshore wind energy, economically feasible technologies must be developed. The monopod bucket foundation is likely to become a cost-effective sub-structure for offshore wind turbines and has the potential to make offshore wind more cost...... and propaedeutic topics, such as bucket foundations under transient lateral loading and under monotonic lateral loading, are also investigated. All the scientific work is fundamentally based on small-scale experimental tests of bucket foundations in dense water-saturated sand. The most important scientific...

  11. Application of Comprehensive Technology of Foundation Treatment and Supporting Design for Supperhigh Fill%超高填方地基处理及支护设计综合技术应用

    Institute of Scientific and Technical Information of China (English)

    黄广明; 李亚川; 张卫红; 孙运环

    2013-01-01

    A coking plant which being built in steel corporation locates in a high mountainous and deep gully area,and the geological condition of foundation is very complex. In order to level the field,the artifi-cial filled soil is needed in the deep gully area. Because artificial filled soil has the characteristics of une-ven,high compression,short-time accumulation,large porosity,middle-high collapsible, it need to treat by artificial foundation. The engineering fill used layered rolling and dynamic compaction to solve backfill,in order to improve the foundation bearing capacity,eliminate inhomogeneous deformation ,seismic liquefac-tion and collapsible, so it satisfied the requirement of foundation to buildings( construction) . The appli-cation of comprehensive technology are respectively introduced in the engineering ,including layered roll-ing, dynamic compaction method ,slope supporting design scheme ,foundation detection and so on.%某钢铁公司拟建焦化厂坐落于高山深沟壑区域,地基地质条件比较复杂。为平整场地需在深沟壑区域进行人工填土,由于人工填土有其不均匀性、压缩性较高、堆积时间短、孔隙度大、中等-强湿陷性等特点,需要进行人工地基处理。该工程填方采用分层碾压及强夯法处理回填体,以提高地基的承载能力、消除不均匀变形、地震液化和湿陷性等,以满足建(构)筑物对地基的要求。该文介绍了分层碾压、强夯处理方法、边坡支护设计方案及地基检测等综合技术在该工程中的应用。

  12. Technology assessment of alternative fuels for the transportation sector. Fact sheets on technology elements and system calculations for technology tracks; Teknologivurdering af alternative drivmidler til transportsektoren. Fakta-ark for teknologi-elementer og systemberegninger for teknologi-spor

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-05-15

    The report documents an analysis, which aims at evaluating technologies in connection with alternative fuels for the transportation sector. During the analysis process a method has been developed for consistent evaluation of alternative transportation fuels with the largest technological and economic potential. This appendix presents key fact sheets which substantiate the analysis presented in the report 'Technology assessment of alternative fuels for the transportation sector'. (BA)

  13. Moebius Syndrome Foundation

    Science.gov (United States)

    ... to Moebius syndrome Who we are Mission and History Foundation leadership Scientific advisory board Press room Our stories Financial ... to Moebius syndrome » Who we are » Mission and History » Foundation leadership » Scientific advisory board » Press room » Our stories » Financial ...

  14. Foundations for Critical Thinking

    Science.gov (United States)

    Bers, Trudy; Chun, Marc; Daly, William T.; Harrington, Christine; Tobolowsky, Barbara F.

    2015-01-01

    "Foundations for Critical Thinking" explores the landscape of critical-thinking skill development and pedagogy through foundational chapters and institutional case studies involving a range of students in diverse settings. By establishing a link between active learning and improved critical thinking, this resource encourages all higher…

  15. Modelling Foundations and Applications

    DEFF Research Database (Denmark)

    This book constitutes the refereed proceedings of the 8th European Conference on Modelling Foundations and Applications, held in Kgs. Lyngby, Denmark, in July 2012. The 20 revised full foundations track papers and 10 revised full applications track papers presented were carefully reviewed...

  16. Finite element analysis of dovetail joint made with the use of CNC technology

    Directory of Open Access Journals (Sweden)

    Václav Sebera

    2010-01-01

    Full Text Available The objective of the paper is the parametrization and the finite element analysis of mechanical pro­per­ties of a through dovetail joint made with the use of a specific procedure by a 3-axis CNC machine. This corner joint was used for the simulation of the bending load of the joint in the angle plane – by compression, i.e. by pressing the joint together. The deformation fields, the stress distribution, the stiffness and the bending moment of the joints were evaluated. The finite element system ANSYS was used to create two parametric numerical models of the joint. The first one represents an ideal­ly stiff joint – both joint parts have been glued together. The second model includes the contact between the joined parts. This numerical model was used to monitor the response of the joint stiffness to the change of the static friction coefficient. The results of both models were compared both with each other and with similar analyses conducted within the research into ready-to-assemble furniture joints. The results can be employed in the designing of more complex furniture products with higher demands concerning stiffness characteristics, such as furniture for sitting. However, this assumption depends on the correction of the created parametric models by experimental testing.

  17. Finite element analysis of silo considering the interaction of wall-basis-foundation%考虑仓壁-基础-地基相互作用时筒仓结构的有限元分析

    Institute of Scientific and Technical Information of China (English)

    马瑞挺; 孟云芳

    2012-01-01

    In order to calculate interaction force from wall-basis-foundation of silo,it is analyzed with ANSYS software under different conditions,rigid foundation or elastic foundation,shallow or deep silo,and axial symmetry load.The results of analysis show that the internal force of silo placed on elastic foundation is more rational than that of silo placed on rigid foundation.Notable problems are listed with silo design examples according to No Moment theory of design in"Code for design of reinforced concrete silos".%为了计算仓壁-基础-地基的相互作用,利用有限元软件ANSYS对分别放置于弹性地基和刚性地基上受轴对称荷载的浅仓和深仓进行地基-基础-结构共同作用的分析.分析结果表明,将筒仓放置于弹性地基上比放置于刚性地基上,其结构内部受力更为合理,并结合具体算例提出了在筒仓结构计算中按《钢筋混凝土筒仓设计规范》提供的无矩理论计算时应注意的问题.

  18. Quantification of cellular penetrative forces using lab-on-a-chip technology and finite element modeling.

    Science.gov (United States)

    Sanati Nezhad, Amir; Naghavi, Mahsa; Packirisamy, Muthukumaran; Bhat, Rama; Geitmann, Anja

    2013-05-14

    Tip-growing cells have the unique property of invading living tissues and abiotic growth matrices. To do so, they exert significant penetrative forces. In plant and fungal cells, these forces are generated by the hydrostatic turgor pressure. Using the TipChip, a microfluidic lab-on-a-chip device developed for tip-growing cells, we tested the ability to exert penetrative forces generated in pollen tubes, the fastest-growing plant cells. The tubes were guided to grow through microscopic gaps made of elastic polydimethylsiloxane material. Based on the deformation of the gaps, the force exerted by the elongating tubes to permit passage was determined using finite element methods. The data revealed that increasing mechanical impedance was met by the pollen tubes through modulation of the cell wall compliance and, thus, a change in the force acting on the obstacle. Tubes that successfully passed a narrow gap frequently burst, raising questions about the sperm discharge mechanism in the flowering plants.

  19. Influence of elements of “technological revolution” on efficiency of the investment and construction sphere

    Directory of Open Access Journals (Sweden)

    Murashova Olga

    2017-01-01

    Full Text Available The article describes a new view on the investment and construction area taking into consideration the influence of information technologies and innovations. The author has pointed out the basic aspects, which could allow making a break-through in management effectiveness, if being implemented in companies’ business or in investment and construction projects. The article presents the definition of the investment and construction cycle as an integrator of innovation solutions. The paper contains the conclusion about the obvious sector development using active implementation of information modeling of the investment and construction project facilities.

  20. 滚动体加工工艺技术与装备发展方向%Machining Process Technology and Development Direction of Equipment for Rolling Elements

    Institute of Scientific and Technical Information of China (English)

    张永乾

    2015-01-01

    The machining process technology and equipment are introduced for rolling elements in China,and the cur-rent situation and existing main problems about machining process for rolling elements in China are analyzed.The de-velopment direction of machining process technology for rolling elements is discussed.%通过对国内滚动体加工工艺技术及装备的介绍,分析了我国滚动体加工工艺现状及存在的主要问题,探讨了滚动体加工工艺技术的发展方向。

  1. 水中桩基础压注混凝土加大截面施工技术研究%Pile foundation in water pouring concrete to increase the construction technology research section

    Institute of Scientific and Technical Information of China (English)

    徐会超

    2014-01-01

    桩基加大截面是一种较为理想的桩基础加固措施,水深较浅(5m以内)的可采用双层钢护筒的方法施工,但水深较深的桩基加固需要采用其他方法保证施工的安全同时减少工程成本。本文以江门市白藤大桥维修加固工程桩基加固(该桥位水深在8m到17.5m之间)为依托对水下桩基础加大截面的施工工艺进行分析研究,以期取得良好的效果,为类似工程的加固提供技术支持和工艺方面的参考。%increasing section reinforcement pile foundation is an ideal pile foundation, shallow water depth (within 5m) can the construction method ofthe protective tube of double steel pile, but deeper reinforcement requiredby other methods to ensure construction safety and reduce the cost of the project. This paper takes Jiangmen City rattan bridge repair reinforcementreinforcement (bit depth of the bridge in the 8m to 17.5m) for the analysis of underwater pile foundation construction technology section of relying on the increase, and achieved good results in order, to provide technical support and technical aspects of the reference for reinforcement of similar engineering.

  2. Networking and Information Technology Research and Development. Advanced Foundations for American Innovation. Supplement to the President’s FY 2004 Budget

    Science.gov (United States)

    2003-09-01

    SC, a public-private collaborative team is developing tiny MEMS technologies to restore vision. Eye diseases such as macular degeneration damage the...people with physical limitations. Lights that talk At Boston’s Spaulding Rehabilitation Hospital, researchers funded by NIH and NSF have demonstrated

  3. Construction Technology of Slab Ballastless Track Foundation of Turnout Area on Subgrade of High-Speed Railway%高速铁路路基上岔区板式无砟轨道基础施工技术

    Institute of Scientific and Technical Information of China (English)

    刘向东; 李书强

    2012-01-01

    Slab ballastless track was laid in turnout area of the main line of Beijing-Shanghai High-speed Railway, and the foundation of the slab ballastless track included three parts; the cushion, concrete base and the turnout plate. Taking Zaozhuang West Station of the guide section of Beijing-Shanghai Highspeed Railway as an example, this article introduces the construction technology of the slab ballastless track foundation of turnout area and the key quality control measures in detail.%京沪高速铁路正线道岔全线铺设岔区板式无砟轨道,岔区板式无砟轨道基础包括:垫层,底座和道岔板3部分.以京沪高速铁路先导段枣庄西站为例,详细介绍了岔区板式无砟轨道基础的施工工艺及主要控制要点.

  4. The application of rotary drilling rig drilling technology in building engineering pile foundation construction%旋挖钻机成孔技术在建筑工程桩基施工中的应用

    Institute of Scientific and Technical Information of China (English)

    翟金宝; 郑亚迪

    2014-01-01

    According to the characteristics of rotary drilling rig could automatic positioning,perpendicularity automatic detection,high automation degree,the drill bit could quickly through various stratums,this paper proposed the pile foundation construction technology using rotary drilling pile instead of manual hole digging pile under miscellaneous fill,backfill deep geological condition,through the pile foundation engineering construction cases showed the rotary drilling pile had very big superiority than manual hole digging pile in cost,construction period and other aspects.%针对旋挖钻机能自动定位,垂直度自动检测,自动化程度高,钻头可快速穿过各种复杂地层的特征,提出了在杂填土、回填土较深的地质条件下用旋挖桩来代替人工挖孔桩的桩基施工技术,通过实际桩基工程施工案例显示旋挖桩比人工挖孔桩在成本、工期等方面有着很大的优势。

  5. Vertical Capacity of Bucket Foundations in Undrained Soil

    DEFF Research Database (Denmark)

    Barari, Amin; Ibsen, Lars Bo

    2014-01-01

    Offshore wind turbine structures are traditionally founded on gravity concrete foundations or mono-piles. Bucket foundations were developed for the offshore oil and gas industry and are now being used in wind turbine construction. The loading in this application is characterized by a vertical load...... due to the slender construction combined with horizontal forces inducing a large overturning moment. Field tests on bucket foundations were performed to gain insight into the vertical load response of bucket foundations in clay soils. The field tests were accompanied by finite element numerical...... simulations in order to provide a better understanding of the parameters influencing bucket foundation behavior....

  6. Practical Soil-Shallow Foundation Model for Nonlinear Structural Analysis

    Directory of Open Access Journals (Sweden)

    Moussa Leblouba

    2016-01-01

    Full Text Available Soil-shallow foundation interaction models that are incorporated into most structural analysis programs generally lack accuracy and efficiency or neglect some aspects of foundation behavior. For instance, soil-shallow foundation systems have been observed to show both small and large loops under increasing amplitude load reversals. This paper presents a practical macroelement model for soil-shallow foundation system and its stability under simultaneous horizontal and vertical loads. The model comprises three spring elements: nonlinear horizontal, nonlinear rotational, and linear vertical springs. The proposed macroelement model was verified using experimental test results from large-scale model foundations subjected to small and large cyclic loading cases.

  7. Prototype bucket foundation for wind turbines

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo; Liingaard, Morten

    The first full scale prototype bucket foundation for wind turbines has been installed in October 2002 at Aalborg University offshore test facility in Frederikshavn, Denmark. The suction caisson and the wind turbine have been equipped with an online monitoring system, consisting of 15 accelerometers...... and a real-time data-acquisition system. The report concerns the in service performance of the wind turbine, with focus on estimation of the natural frequencies of the structure/foundation. The natural frequencies are initially estimated by means of experimental Output-only Modal analysis. The experimental...... estimates are then compared with numerical simulations of the suction caisson foundation and the wind turbine. The numerical model consists of a finite element section for the wind turbine tower and nacelle. The soil-structure interaction of the soil-foundation section is modelled by lumped-parameter models...

  8. Mechatronics a foundation course

    CERN Document Server

    de Silva, Clarence W

    2010-01-01

    Mechatronic EngineeringMechatronic SystemsModeling and Design Mechatronic Design Concept Evolution of Mechatronics Application Areas Study of Mechatronics Organization of the Book Basic Elements and Components Mechanical Elements Fluid Elements Thermal Elements Mechanical Components Passive Electrical Elements and MaterialsActive Electronic Components Light Emitters and Displays Light Sensors Modeling of Mechatronic Systems Dynamic Systems and Models Lumped Elements and Analogies Analytical Model Development Model Linearization Linear Graphs Transfer Functions and Frequency-Domain Models Theve

  9. INFLUENCE OF DIFFERENT TEACING TECHNOLOGIES ON BEING INFORMED ABOUT MOBILE ELEMENTS OF BASKETBALL

    Directory of Open Access Journals (Sweden)

    Goran Šekeljić

    2009-11-01

    Full Text Available This work is dedicated to the comparative presentation of the results achieved by the pupils that have been partecipated in basketball tests after the implementation of the alternative curriculum having the basketbal as its contentsl. The research has been done during 2005/2006 school year on the sample of 183 male and female pupils of the fourth grade of the primary school. The pupils have been divided in two experimental groups. The first one has realized its curriculum in basketball playground according to the stan- dards and rules of mini-basket, while the the other, experimental group, has realized its teaching contents in the standard basketball playground. The results have pointed out that the dimension of the ball, such as the height of the basket are very important related to the achievements of certain basketball tests. On the other hand, certain number of the basketball tests has not shown any significant differences that can be statistically confirmed. This work can be useful in the methodical approach while teaching the basic elements of the basketball technique

  10. Hepatitis B Foundation

    Science.gov (United States)

    ... worldwide 2 Billion People have been infected with Hepatitis B Worldwide The Hepatitis B Foundation is working on ... of people living with hepatitis B. Learn About Hepatitis B in 11 Other Languages . Resource Video See More ...

  11. Prostate Cancer Foundation

    Science.gov (United States)

    ... P 2 rovocative Questions PCCTC Scientific Retreat Coffey-Holden Research News Faces of Prostate Cancer [4] Survivors ... Foundation News The Prostate Cancer Foundation’s 2016 Coffey-Holden Prostate Cancer Academy Meeting accelerates advances in the ...

  12. Patient Advocate Foundation

    Science.gov (United States)

    ... Resources CoPay Resources Healthcare Reform Prevention View Resource Click here to submit a resource Subscribe Copyright © 2012 Patient Advocate Foundation Headquarters: 421 Butler Farm Road, Hampton, VA 23666 Phone: (800) 532-5274 - ...

  13. Restless Legs Syndrome Foundation

    Science.gov (United States)

    ... Into Relieved Are you experiencing symptoms linked to restless legs syndrome (RLS)? Find tools and support to help get ... I couldn’t sleep. Fortunately, I found the Restless Legs Syndrome Foundation and learned what type of doctor to ...

  14. Lupus Foundation of America

    Science.gov (United States)

    ... and Testing New Treatments Learn More About the Lupus Foundation of America We are devoted to solving ... Spam Control Text: Please leave this field empty Lupus FAQ What is lupus? What are the common ...

  15. Carcinoid Cancer Foundation

    Science.gov (United States)

    ... Assistance News Blog E-News Archives Contact Donate Carcinoid Cancer Foundation Navigation Home About Back Our Founder Mission ... FREQUENTLY ASKED QUESTIONS SUPPORT GROUPS The ABC's of Carcinoid and Neuroendocrine Tumors Three of the world’s leading ...

  16. The foundations of statistics

    CERN Document Server

    Savage, Leonard J

    1972-01-01

    Classic analysis of the foundations of statistics and development of personal probability, one of the greatest controversies in modern statistical thought. Revised edition. Calculus, probability, statistics, and Boolean algebra are recommended.

  17. Stuttering Foundation of America

    Science.gov (United States)

    ... is from their doctor. Read More Powerful New Film Reveals Emotional Impact of Stuttering The life impact ... President Introduces Award-Winning Author at St. Simons School Stuttering Foundation President Jane Fraser had the honor ...

  18. National Psoriasis Foundation

    Science.gov (United States)

    ... is treated in their countries. Previous Next National Psoriasis Foundation provides you with the help you need to best manage your psoriasis or psoriatic arthritis, while promoting research to find ...

  19. American Lyme Disease Foundation

    Science.gov (United States)

    ... Infectious Diseases, 35: 451-464, 2002) What is Lyme Disease? Lyme disease (LD) is an infection caused by ... mission with your own tax-deductible contribution. American Lyme Disease Foundation, Inc. PO Box 466 Lyme, CT 06371 ...

  20. Foundations of laser spectroscopy

    CERN Document Server

    Stenholm, Stig

    2005-01-01

    A simple presentation of the theoretical foundations of steady-state laser spectroscopy, this text helps students to apply theory to calculations with a systematic series of examples and exercises. 1984 edition.

  1. Sjogren's Syndrome Foundation

    Science.gov (United States)

    ... and receive discounts on Sjögren's resources. Follow Us Online! Join the SSF on Twitter, YouTube, Facebook, and Linkedin! anxiety © 2016 Sjögren’s Syndrome Foundation, Inc. 6707 Democracy Blvd, Ste 325, Bethesda, ...

  2. Mesothelioma Applied Research Foundation

    Science.gov (United States)

    ... Percentage Donations Tribute Wall Other Giving/Fundraising Opportunities Bitcoin Donation Form FAQs Mesothelioma Awareness Day: Find out ... Percentage Donations Tribute Wall Other Giving/Fundraising Opportunities Bitcoin Donation Form FAQs © 2017 Mesothelioma Applied Research Foundation, ...

  3. Foundations of measurement

    CERN Document Server

    Suppes, Patrick

    1989-01-01

    Foundations of Measurement offers the most coherently organized treatment of the topics and issues central to measurement. Much of the research involved has been scattered over several decades and a multitude of journals--available in many instances only to specialties. With the publication of Volumes two and three of this important work, Foundations of Measurement is the most comprehensive presentation in the area of measurement.

  4. Foundations of Information Theory

    OpenAIRE

    Burgin, Mark

    2008-01-01

    Information is the basic concept of information theory. However, there is no definition of this concept that can encompass all uses of the term information in information theories and beyond. Many question a possibility of such a definition. However, foundations of information theory developed in the context of the general theory of information made it possible to build such a relevant and at the same time, encompassing definition. Foundations of information theory are built in a form of onto...

  5. Foundational aspects of security

    DEFF Research Database (Denmark)

    Chatzikokolakis, Konstantinos; Mödersheim, Sebastian Alexander; Palamidessi, Catuscia

    2014-01-01

    This Special Issue of the Journal of Computer Security focuses on foundational aspects of security, which in recent years have helped change much of the way we think about and approach system security.......This Special Issue of the Journal of Computer Security focuses on foundational aspects of security, which in recent years have helped change much of the way we think about and approach system security....

  6. Elements of spatial data quality as information technology support for sustainable development planning

    Directory of Open Access Journals (Sweden)

    Joksić Dušan

    2004-01-01

    Full Text Available We are witnessing nowadays that the last decade of the past century, as well as the first years of the present one, have brought technology expansion with respect to spatial data gathering and processing which makes a physical basis for management of spatial development. This has resulted in enlargement of the spatial data market. New technologies, presented in computer applications, have greatly expanded the number of users of these products. The philosophy of spatial data collecting has changed; analogue maps and plans printed on paper have been replaced by digital data bases which enable their presentation in a way that is the best for a particular user. Further, digital spatial data bases provide the possibility of their further upgrading by users. The two aspects, with respect to circumstances mentioned above, are very important in the process of data bases production and distribution. Firstly, the users of these data bases should be the ones who decide which of the available bases could satisfy their requirements, or in other words, what is the data quality level necessary for a certain application. On the other hand, the visualization of digital data bases could often mislead, since review of data bases could present data with better accuracy then the actual one. Thus, certain methods that would point to a quality of the selected data in the process of their analysis should be available to users. Specific, already adopted international standards, or specially developed procedures and methodologies, so called de facto standards, could be used in this data processing, enabling the estimation of these data quality. The development of Open GIS concept requires the adoption of widely accepted standards for spatial data quality. It is recommended that ISO standards should be accepted, firstly TC211 standards which are related to geographic information and geomatics. The realization of projects on ISO standards should be finished by 2006, so

  7. Comparisons of elastic and rigid blade-element rotor models using parallel processing technology for piloted simulations

    Science.gov (United States)

    Hill, Gary; Duval, Ronald W.; Green, John A.; Huynh, Loc C.

    1991-01-01

    A piloted comparison of rigid and aeroelastic blade-element rotor models was conducted at the Crew Station Research and Development Facility (CSRDF) at Ames Research Center. A simulation development and analysis tool, FLIGHTLAB, was used to implement these models in real time using parallel processing technology. Pilot comments and quantitative analysis performed both on-line and off-line confirmed that elastic degrees of freedom significantly affect perceived handling qualities. Trim comparisons show improved correlation with flight test data when elastic modes are modeled. The results demonstrate the efficiency with which the mathematical modeling sophistication of existing simulation facilities can be upgraded using parallel processing, and the importance of these upgrades to simulation fidelity.

  8. Comparison of elastic and rigid blade-element rotor models using parallel processing technology for piloted simulations

    Science.gov (United States)

    Hill, Gary; Du Val, Ronald W.; Green, John A.; Huynh, Loc C.

    1991-01-01

    A piloted comparison of rigid and aeroelastic blade-element rotor models was conducted at the Crew Station Research and Development Facility (CSRDF) at Ames Research Center. A simulation development and analysis tool, FLIGHTLAB, was used to implement these models in real time using parallel processing technology. Pilot comments and qualitative analysis performed both on-line and off-line confirmed that elastic degrees of freedom significantly affect perceived handling qualities. Trim comparisons show improved correlation with flight test data when elastic modes are modeled. The results demonstrate the efficiency with which the mathematical modeling sophistication of existing simulation facilities can be upgraded using parallel processing, and the importance of these upgrades to simulation fidelity.

  9. Determination of inorganic elements in animal feeds by NIRS technology and a fibre-optic probe.

    Science.gov (United States)

    González-Martín, Inmaculada; Alvarez-García, Noelia; González-Pérez, Claudio; Villaescusa-García, Virginia

    2006-05-15

    In the present work we study the use of near infra-red spectroscopy (NIRS) technology together with a remote reflectance fibre-optic probe for the analysis of the mineral composition of animal feeds. The method allows immediate control of the feeds without prior sample treatment or destruction through direct application of the fibre-optic probe on the sample. The regression method employed was modified partial least squares (MPLS). The calibration results obtained using forty samples of animal feeds allowed the determination of Fe, Mn, Ca, Na, K, P, Zn and Cu, with a standard error of prediction (SEP(C)) and a correlation coefficient (RSQ) of 0.129 and 0.859 for Fe; 0.175 and 0.816 for Mn; 5.470 and 0.927 for Ca; 2.717 and 0.862 for Na; 4.397 and 0.891 for K; 2.226 and 0.881 for P; 0.153 and 0.764 for Zn, and 0.095 and 0.918 for Cu, respectively. The robustness of the method was checked by applying it to 10 animal feeds samples of unknown mineral composition in the external validation.

  10. 克隆人技术伦理根基之思考%Considerations on the Ethical Foundations of Human Cloning Technology

    Institute of Scientific and Technical Information of China (English)

    季爱民

    2014-01-01

    From the purpose of human cloning technology ,basic research of cloning generally does not cause a strong impact on the ethical issues ,while therapeutic and reproductive cloning really do .The ethical issues of reproductive cloning is especially detrimental to human dignity ,w hile the core of the ethical issues on therapeutic cloning is the rights and moral status of the embryonic .Taking the two property of truth and practice of human cloning technology into consideration ,as well as the relative criteria ,absolutely good or bad judge on the technology is not rigorous .However ,it is necessary to formulate ethical principles that regulate the technology field on bioethics .Among them ,the principle of informed consent is supposed to be an important one ,the ethics basis of w hich is :human being is ends ,not means .%从克隆人技术目的看,基础研究性克隆一般不会引起伦理上强烈冲击,治疗性和生殖性克隆则强烈冲击着人类伦理道德。生殖性克隆伦理问题的突出表现在于有损人类的尊严,治疗性克隆伦理问题的核心则是胚胎的权利与道德地位问题。考虑到克隆人技术的真理性和实践性两个层面,以及评判标准的相对性,对该技术进行绝对的善恶评判有失慎重。不过,生命伦理领域制定规范该技术的伦理原则是必须的,其中,知情同意原则理应是一个重要原则,其伦理学依据在于:人是目的,而不是手段。

  11. 遥感技术在地震应急基础数据库建设中的应用%The application of remote sensing technology in the construction of earthquake emergency foundational database

    Institute of Scientific and Technical Information of China (English)

    邓宏宇; 孙柏涛; Weimin Dong

    2013-01-01

    Based on the need of earthquake emergency foundational database,and in order to get the arbitrary area range of building foundational information data rapidly,effectively and accurately,using the object-oriented extraction technology to get the building information from the remote sensing images,and combing with GIS technology to change the data into a spatial grid data in spatial geographic coordinates,and obtain a space grid database,which contains building foundational information,this paper introduces the technical route of database construction and the application in seismic damage assessment system and takes Sichuan Province as an example to validate the feasibility and accuracy of proposed method.This job gives an effective data support to earthquake emergency,and provides a new idea to carry out greater range of database establishing work.%基于地震应急基础数据库的需求,以快速、有效、准确的获取任意区域范围的建筑物基础信息数据为目的,通过应用面向对象特征提取技术从遥感图像上获取建筑物信息,并结合GIS技术将获取到的数据在空间地理坐标下网格化,得到建筑物基础信息空间网格数据库.本文详细介绍了数据库建设的技术路线和在震害评估系统中的应用,并以四川省为例验证了本方法的可行性和准确性,为地震应急工作提供了有效的数据支持,为开展更大范围的数据库建设工作提供了一种新的思路.

  12. Technology of large-sized heat-insulating elements for energetic redevelopment of facades; Grosselement-Daemmtechnik (GeDt) zur energetischen Fassadensanierung

    Energy Technology Data Exchange (ETDEWEB)

    Reyer, E. [Ingenieurgesellschaft Gathmann, Reyer, und Teilhaber mbH (IGRT), Bochum (Germany); Sieder, M. [Schweitzer GmbH - Beratende Ingenieure, Saarbrucken (Germany); Bamberger, C.; Schild, K. [Bochum Univ., Bochum (Germany). Baukonstruktionen und Bauphysik; Voelkner, S. [Rockwool International A/S, Hedehusene (Denmark). Group Development and Application

    2004-07-01

    Sustainable reduction of heating energy - required for our buildings - can be reached by additional insulation of existing old building facades. Sometimes homeowners interest about the heat-insulating redevelopment of their building facades seemed to be quite small, because of longer construction times and restrictions by scaffolding, noise and pollution often concerned with conventional technologies. New impulses for the realization of additional redevelopment measures can be given by innovative, time-saving and less disturbing redevelopment technologies - like the following described. So the federal ministry for economy and technology and 4 industry partners promoted the research project 'Energetic redevelopment of facades with industrial prefabrication technologies' at the University of Bochum (Institute of constructional civil engineering). In the context of this research project all essentials of the technology of large-sized heat-insulating elements for sustainable heating energy saving redevelopment of facades were developed. This technology is based on large-sized heat-insulating elements (height of about 2,80 m and length up to 8 m) considering aspects of structural analysis, physics relating to construction and assembling elements. For the application of the large-sized elements at building facades two fixing systems were created and tested - one based on dot-shaped fixings, the other on bar-shaped fixings. To ensure the prefabrication of those large-sized redevelopment elements and their exact assembling the development of a contactless surveying and marking out system was necessary - separately realized at the University of Bochum (area of geodetics). Large size and system-specific implementation details of the redevelopment elements mentioned above caused the development of suitable tools for assembling and transporting elements. (orig.)

  13. Level Classifications of Foundation Stiffness

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo; Liingaard, Morten

    2007-01-01

    This article describes a foundation module developed and implemented in both HAWC and FLEX capable of to simulate the frequency dependent stiffness and damping of foundations e.g. pile, gravitation and bucket foundations.......This article describes a foundation module developed and implemented in both HAWC and FLEX capable of to simulate the frequency dependent stiffness and damping of foundations e.g. pile, gravitation and bucket foundations....

  14. Understanding selected trace elements behavior in a coal-fired power plant in Malaysia for assessment of abatement technologies.

    Science.gov (United States)

    Mokhtar, Mutahharah M; Taib, Rozainee M; Hassim, Mimi H

    2014-08-01

    The Proposed New Environmental Quality (Clean Air) Regulation 201X (Draft), which replaces the Malaysia Environmental Quality (Clean Air) 1978, specifies limits to additional pollutants from power generation using fossil fuel. The new pollutants include Hg, HCl, and HF with limits of 0.03, 100, and 15 mg/N-m3 at 6% O2, respectively. These pollutants are normally present in very small concentrations (known as trace elements [TEs]), and hence are often neglected in environmental air quality monitoring in Malaysia. Following the enactment of the new regulation, it is now imperative to understand the TEs behavior and to assess the capability of the existing abatement technologies to comply with the new emission limits. This paper presents the comparison of TEs behavior of the most volatile (Hg, Cl, F) and less volatile (As, Be, Cd, Cr, Ni, Se, Pb) elements in subbituminous and bituminous coal and coal combustion products (CCP) (i.e., fly ash and bottom ash) from separate firing of subbituminous and bituminous coal in a coal-fired power plant in Malaysia. The effect of air pollution control devices configuration in removal of TEs was also investigated to evaluate the effectiveness of abatement technologies used in the plant. This study showed that subbituminous and bituminous coals and their CCPs have different TEs behavior. It is speculated that ash content could be a factor for such diverse behavior In addition, the type of coal and the concentrations of TEs in feed coal were to some extent influenced by the emission of TEs in flue gas. The electrostatic precipitator (ESP) and seawater flue gas desulfurization (FGD) used in the studied coal-fired power plant were found effective in removing TEs in particulate and vapor form, respectively, as well as complying with the new specified emission limits. Implications: Coals used by power plants in Peninsular Malaysia come from the same supplier (Tenaga Nasional Berhad Fuel Services), which is a subsidiary of the Malaysia

  15. Foundations for offshore wind turbines.

    Science.gov (United States)

    Byrne, B W; Houlsby, G T

    2003-12-15

    An important engineering challenge of today, and a vital one for the future, is to develop and harvest alternative sources of energy. This is a firm priority in the UK, with the government setting a target of 10% of electricity from renewable sources by 2010. A component central to this commitment will be to harvest electrical power from the vast energy reserves offshore, through wind turbines or current or wave power generators. The most mature of these technologies is that of wind, as much technology transfer can be gained from onshore experience. Onshore wind farms, although supplying 'green energy', tend to provoke some objections on aesthetic grounds. These objections can be countered by locating the turbines offshore, where it will also be possible to install larger capacity turbines, thus maximizing the potential of each wind farm location. This paper explores some civil-engineering problems encountered for offshore wind turbines. A critical component is the connection of the structure to the ground, and in particular how the load applied to the structure is transferred safely to the surrounding soil. We review previous work on the design of offshore foundations, and then present some simple design calculations for sizing foundations and structures appropriate to the wind-turbine problem. We examine the deficiencies in the current design approaches, and the research currently under way to overcome these deficiencies. Designs must be improved so that these alternative energy sources can compete economically with traditional energy suppliers.

  16. Modelling Foundations and Applications

    DEFF Research Database (Denmark)

    This book constitutes the refereed proceedings of the 8th European Conference on Modelling Foundations and Applications, held in Kgs. Lyngby, Denmark, in July 2012. The 20 revised full foundations track papers and 10 revised full applications track papers presented were carefully reviewed...... and selected from 81 submissions. Papers on all aspects of MDE were received, including topics such as architectural modelling and product lines, code generation, domain-specic modeling, metamodeling, model analysis and verication, model management, model transformation and simulation. The breadth of topics...

  17. Foundations of predictive analytics

    CERN Document Server

    Wu, James

    2012-01-01

    Drawing on the authors' two decades of experience in applied modeling and data mining, Foundations of Predictive Analytics presents the fundamental background required for analyzing data and building models for many practical applications, such as consumer behavior modeling, risk and marketing analytics, and other areas. It also discusses a variety of practical topics that are frequently missing from similar texts. The book begins with the statistical and linear algebra/matrix foundation of modeling methods, from distributions to cumulant and copula functions to Cornish--Fisher expansion and o

  18. Foundations of Inference

    CERN Document Server

    Knuth, Kevin H

    2010-01-01

    We present a foundation for inference that unites and significantly extends the approaches of Kolmogorov and Cox. Our approach is based on quantifying finite lattices of logical statements in a way that satisfies general lattice symmetries. With other applications in mind, our derivations assume minimal symmetries, relying on neither complementarity nor continuity or differentiability. Each relevant symmetry corresponds to an axiom of quantification, and these axioms are used to derive a unique set of rules governing quantification of the lattice. These rules form the familiar probability calculus. We also derive a unique quantification of divergence and information. Taken together these results form a simple and clear foundation for the quantification of inference.

  19. TCP/IP foundations

    CERN Document Server

    Blank, Andrew G

    2006-01-01

    The world of IT is always evolving, but in every area there are stable, core concepts that anyone just setting out needed to know last year, needs to know this year, and will still need to know next year. The purpose of the Foundations series is to identify these concepts and present them in a way that gives you the strongest possible starting point, no matter what your endeavor. TCP/IP Foundations provides essential knowledge about the two protocols that form the basis for the Internet, as well as many other networks. What you learn here will benefit you in the short term, as you acquire and

  20. Foundations of stochastic analysis

    CERN Document Server

    Rao, M M; Lukacs, E

    1981-01-01

    Foundations of Stochastic Analysis deals with the foundations of the theory of Kolmogorov and Bochner and its impact on the growth of stochastic analysis. Topics covered range from conditional expectations and probabilities to projective and direct limits, as well as martingales and likelihood ratios. Abstract martingales and their applications are also discussed. Comprised of five chapters, this volume begins with an overview of the basic Kolmogorov-Bochner theorem, followed by a discussion on conditional expectations and probabilities containing several characterizations of operators and mea

  1. Foundations of Risk Analysis

    CERN Document Server

    Aven, Terje

    2012-01-01

    Foundations of Risk Analysis presents the issues core to risk analysis - understanding what risk means, expressing risk, building risk models, addressing uncertainty, and applying probability models to real problems. The author provides the readers with the knowledge and basic thinking they require to successfully manage risk and uncertainty to support decision making. This updated edition reflects recent developments on risk and uncertainty concepts, representations and treatment. New material in Foundations of Risk Analysis includes:An up to date presentation of how to understand, define and

  2. Foundation Treatment Construction Technology of Landfill by Super Down Hole Dynamic Compaction Pile Combined with Bored Pile%SDDC桩结合灌注桩的垃圾填埋场地基处理施工技术∗

    Institute of Scientific and Technical Information of China (English)

    毛正君; 陶志怀; 魏荣誉; 韩小明

    2016-01-01

    由于垃圾填埋场地具有性质复杂、厚度变化大、强度较低、压缩系数大、腐蚀性和污染性强等特点,在服务期内和封顶后都会产生大幅度的沉降。结合西安某垃圾填埋场实例,探讨了孔内深层超强夯桩( SDDC桩)结合灌注桩在垃圾填埋场地基处理中的施工技术。实践证明,采用该技术在满足地基承载力的基础上,降低了工程造价、提高了工程质量,取得了良好的社会经济效益。%Due to some characteristics of the landfill such as the complex properties, big change in thickness, low strength, large compressibility, strong corrosion resistance and polluting, it will generate settlement by a large margin during the service period and after capping. This paper cites an example of a landfill site in Xi’ an, probing into the foundation treatment construction technology of landfill by super down hole dynamic compaction pile combined with bored pile. It has been proved in practice that using this technique can meet the bearing capacity of foundation soil, at the same time, it also can reduce the engineering cost, improve the engineering quality and achieve good social and economic benefits.

  3. 浅析科技创业环境及其构成要素%Analysis of Technological Entrepreneurial Environment Concept and its Elements

    Institute of Scientific and Technical Information of China (English)

    鲁兴启; 任向超

    2014-01-01

    An accurate understanding of the concept of technological entrepreneurial environment and the scientific analysis of elements are prerequisites for its construction.The article makes a brief analysis of the connotation of technological entre-preneurial environment and its impact on technological entrepreneurial activities,analyzes the concept of technological en-trepreneurial environment in macroscopic and microcosmic perspective,briefly introduces its types and characteristics,and puts forward the structure model of the elements .%简要分析科技创业环境的含义及其对科技创业活动的影响,从宏观和微观两种视角去解读科技创业环境的概念,探讨科技创业环境的类型和特征,提出科技创业环境构成要素的结构模型。

  4. Grouting for Pile Foundation Improvement

    NARCIS (Netherlands)

    Van der Stoel, A.E.C.

    2001-01-01

    The aim of this research was to examine the use of grouting methods for pile foundation improvement, a generic term that is used here to define both foundation renovation (increasing the bearing capacity of a pile foundation that has insufficient bearing capacity) and foundation protection (safeguar

  5. Foundations for microstrip circuit design

    CERN Document Server

    Edwards, Terry

    2016-01-01

    Building on the success of the previous three editions, Foundations for Microstrip Circuit Design offers extensive new, updated and revised material based upon the latest research. Strongly design-oriented, this fourth edition provides the reader with a fundamental understanding of this fast expanding field making it a definitive source for professional engineers and researchers and an indispensable reference for senior students in electronic engineering. Topics new to this edition: microwave substrates, multilayer transmission line structures, modern EM tools and techniques, microstrip and planar transmision line design, transmission line theory, substrates for planar transmission lines, Vias, wirebonds, 3D integrated interposer structures, computer-aided design, microstrip and power-dependent effects, circuit models, microwave network analysis, microstrip passive elements, and slotline design fundamentals.

  6. Jeffrey Modell Foundation

    Science.gov (United States)

    ... with the PI Community VILLAGE PARK Apply to WIN or have fun at the Kids Zone AIRPORT Fly into our airport & become a “Dream ... Café Social Hub Vicki's Voice Resources Village Park WIN Patients Organizations World PI Week Kids Zone Airport Roots & Wings Jeffrey Modell Foundation Global PI ...

  7. National Emphysema Foundation

    Science.gov (United States)

    ... HOME THE LUNG COPD / Emphysema Advice for COPD/Emphysema Patients from Dr. Petty Asthma Interstitial Lung Disease PREVENTION Smoking Pollution and the Environment Occupational Health Hazards Early Detection LIVING with COPD Therapeutic ... joomla Welcome to the National Emphysema Foundation (NEF) This site is for the benefit ...

  8. Buckling of Bucket Foundations

    DEFF Research Database (Denmark)

    Madsen, Søren; Andersen, Lars Vabbersgaard; Ibsen, Lars Bo

    2012-01-01

    In this paper, the risk of structural buckling during installation of large-diameter bucket foundations is addressed using numerical methods. Imperfect geometries are introduced based on the pre-buckling mode shapes from a linear Eigenvalue buckling analysis. Various imperfect geometries are intr...

  9. Foundations of factor analysis

    CERN Document Server

    Mulaik, Stanley A

    2009-01-01

    Introduction Factor Analysis and Structural Theories Brief History of Factor Analysis as a Linear Model Example of Factor AnalysisMathematical Foundations for Factor Analysis Introduction Scalar AlgebraVectorsMatrix AlgebraDeterminants Treatment of Variables as Vectors Maxima and Minima of FunctionsComposite Variables and Linear Transformations Introduction Composite Variables Unweighted Composite VariablesDifferentially Weighted Composites Matrix EquationsMulti

  10. The Broad Foundations, 2006

    Science.gov (United States)

    Broad Foundation, 2006

    2006-01-01

    The mission of the Broad Foundations is to transform K-12 urban public education through better governance, management, labor relations and competition; make significant contributions to advance major scientific and medical research; foster public appreciation of contemporary art by increasing access for audiences worldwide; and lead and…

  11. Excavationless Exterior Foundation Insulation Exploratory Study

    Energy Technology Data Exchange (ETDEWEB)

    Mosiman, G.; Wagner, R.; Schirber, T.

    2013-02-01

    The key objective of this exploratory study was to investigate the feasibility of the development or adoption of technologies that would enable a large percentage of existing homes in cold climates to apply a combination 'excavationless' soil removal process with appropriate insulation and water management on the exterior of existing foundations at a low cost. Our approach was to explore existing excavation and material technologies and systems to discover whether potential successful combinations existed.

  12. Excavationless Exterior Foundation Insulation Exploratory Study

    Energy Technology Data Exchange (ETDEWEB)

    Mosimann, Garrett [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership; Wagner, Rachel [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership; Schirber, Tom [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership

    2013-02-01

    The key objective of this exploratory study was to investigate the feasibility of the development or adoption of technologies that would enable a large percentage of existing homes in cold climates to apply a combination 'excavationless' soil removal process with appropriate insulation and water management on the exterior of existing foundations at a low cost. Our approach was to explore existing excavation and material technologies and systems to discover whether potential successful combinations existed.

  13. An empirically-derived approach for investigating Health Information Technology: the Elementally Entangled Organisational Communication (EEOC framework

    Directory of Open Access Journals (Sweden)

    Georgiou Andrew

    2012-07-01

    Full Text Available Abstract Background The purpose of this paper is to illustrate the Elementally Entangled Organisational Communication (EEOC framework by drawing on a set of three case studies which assessed the impact of new Health Information Technology (HIT on a pathology service. The EEOC framework was empirically developed as a tool to tackle organisational communication challenges in the implementation and evaluation of health information systems. Methods The framework was synthesised from multiple research studies undertaken across a major metropolitan hospital pathology service during the period 2005 to 2008. These studies evaluated the impact of new HIT systems in pathology departments (Laboratory Information System and an Emergency Department (Computerised Provider Order Entry located in Sydney, Australia. Results Key dimensions of EEOC are illustrated by the following case studies: 1 the communication infrastructure between the Blood Bank and the ward for the coordination and distribution of blood products; 2 the organisational environment in the Clinical Chemistry and Haematology departments and their attempts to organise, plan and control the processing of laboratory specimens; and 3 the temporal make up of the organisation as revealed in changes to the way the Central Specimen Reception allocated, sequenced and synchronised work tasks. Conclusions The case studies not only highlight the pre-existing communication architecture within the organisation but also the constitutive role communication plays in the way organisations go about addressing their requirements. HIT implementation involves a mutual transformation of the organisation and the technology. This is a vital consideration because of the dangers associated with poor organisational planning and implementation of HIT, and the potential for unintended adverse consequences, workarounds and risks to the quality and safety of patient care. The EEOC framework aims to account for the complex

  14. Vibration Based Wind Turbine Tower Foundation Design Utilizing Soil-Foundation-Structure Interaction

    Science.gov (United States)

    Al Satari, P. E. Mohamed; Hussain, S. E. Saif

    2008-07-01

    Wind turbines have been used to generate electricity as an alternative energy source to conventional fossil fuels. This case study is for multiple wind towers located at different villages in Alaska where severe arctic weather conditions exist. The towers are supported by two different types of foundations; large mat or deep piles foundations. Initially, a Reinforced Concrete (RC) mat foundation was utilized to provide the system with vertical and lateral support. Where soil conditions required it, a pile foundation solution was devised utilizing a 30″ thick RC mat containing an embedded steel grillage of W18 beams supported by 20″-24″ grouted or un-grouted piles. The mixing and casting of concrete in-situ has become the major source of cost and difficulty of construction at these remote Alaska sites. An all-steel foundation was proposed for faster installation and lower cost, but was found to impact the natural frequencies of the structural system by significantly softening the foundation system. The tower-foundation support structure thus became near-resonant with the operational frequencies of the wind turbine leading to a likelihood of structural instability or even collapse. A detailed 3D Finite-Element model of the original tower-foundation-pile system with RC foundation was created using SAP2000. Soil springs were included in the model based on soil properties obtained from the geotechnical consultant. The natural frequency from the model was verified against the tower manufacturer analytical and the experimental values. Where piles were used, numerous iterations were carried out to eliminate the need for the RC and optimize the design. An optimized design was achieved with enough separation between the natural and operational frequencies to prevent damage to the structural system eliminating the need for any RC encasement to the steel foundation or grouting to the piles.

  15. Dynamic Analysis of Foundation Supporting Rotary Machine

    Directory of Open Access Journals (Sweden)

    Utkarsh S. Patel

    2015-08-01

    Full Text Available With the advancement of technology in the field of industry, high speed machinery has been developed. As the speed of machinery has increased, vibrations also increased. Machines transmit vibrations to the structure supporting them. Hence, it is important to design and develop such structure which sustains the vibrations of machinery. Hence, in this study it has been aimed to execute the study on foundations supporting rotary type of machine like blower. In this paper, the most important parameters like frequency and amplitude are considered while execution of analysis of machine foundation supporting blower type machine. This paper shows, better interface between foundation designer and machine manufacturer for better performance of machine. The design aids/approaches for foundation design is also described in this paper and an attempt has been made to study the dynamic behaviour of a foundation structure for blower type machine subjected to forces due to operation of blower machine. Two different types of foundations for Rotary type Machine that is Blower have been studied in this paper

  16. Development of realtime monitoring technology for laser photoreaction product - Study on spectroscopy of rare earth elements by using diode laser and hollow cathode glow discharge

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sang Chun [Kyungnam University, Masan (Korea); Lee, Gea Ho [Chungnam National University, Taejon (Korea); Lee, Yong Il [Changwon National University, Changwon (Korea); Kim, Hyo Jin [Dongduk Women' s University, Seoul (Korea); Huh, Yong Dck [Dankook University, Seoul (Korea)

    1998-05-01

    Currently, fast and precise analysis of rare earth and actinide elements are much concerned and required for the safe treatments and storage of nuclear wastes generated by nuclear power plants. However, current technology is still far from the requirements for accurate realtime monitoring and measurement of radioactive elements. This project is of development of new technology of realtime monitoring and analysis of rare earth elements by using glow discharge and diode laser spectroscopy, and the study of spectroscopic characteristics of rare earth elements in glow discharge plasma. And, saturated absorption spectroscopy of rare earth elements was investigated with diode lasers. A see-through hollow cathode glow discharge (st-HCGD) cell was developed for the purpose of a portable atomizer and and its characteristics were investigated. High resolution spectroscopy was achieved with diode laser assisted saturated absorption spectroscopy. it is considered for major improvement of radioactive isotope detection technology. We expect a portable high resolution spectrometry with a see-through HCGD atomizer and diode lasers in near future. (Author). 63 refs., 39 figs., 7 tabs.

  17. Gender Effects on Curriculum Elements Based on Mathematics and Science and Technology Teachers' Opinions: A Meta-Analysis for Turkish Studies

    Science.gov (United States)

    Küçüktepe, Seval Eminoglu; Yildiz, Nilgün

    2016-01-01

    The purpose of this study is to investigate the gender effect on elementary mathematics and science and technology teachers' opinions regarding curriculum elements which are objectives, content, learning situation and evaluation. Meta-analysis was used in order to analyze data. Two articles, 11 master and one doctorate thesis which were conducted…

  18. 18 February 2013 - Foundation for Polish Science President M. Zylicz signing the guest book with CERN Director for Research and Scientific Computing S. Bertolucci; visiting the ALICE experimental cavern with K. Safarik and L. Graczykowskind LHC tunnel with Technology Department A. Siemko.

    CERN Multimedia

    Samuel Morier-Genoud

    2013-01-01

    18 February 2013 - Foundation for Polish Science President M. Zylicz signing the guest book with CERN Director for Research and Scientific Computing S. Bertolucci; visiting the ALICE experimental cavern with K. Safarik and L. Graczykowskind LHC tunnel with Technology Department A. Siemko.

  19. [Influence of laser power and incident angle as well as testing distance on laser inducted breakdown spectroscopy (LIBS) technology for spectroscopy diagnosis and multi-element analysis].

    Science.gov (United States)

    Zhai, Yang; Zhu, Ri-Hong; Shen, Hua; Gu, Jin-Liang

    2011-10-01

    Laser inducted breakdown spectroscopy (LIBS) technology has been used widely for the multi-element analysis of different samples and also an effective way to realize the spectroscopy diagnosis applied to calculating the electron temperature and vibration-rotation temperature etc of some certain elements. It is a highly effective measurement for its non-contact and nondestructive on-line analysis with the help of a high-speed response CCD camera. In the present paper, the authors tested an alley though LIBS technology to determine its elements in terms of species and quantities and also discussed some influences of the incident angle and the power changes of the laser beam as well as the measurement distance changes on the experimental results and and gave appropriate theoretical explanation.

  20. Vibration Analysis of Timoshenko Beams on a Nonlinear Elastic Foundation

    Institute of Scientific and Technical Information of China (English)

    MO Yihua; OU Li; ZHONG Hongzhi

    2009-01-01

    The vibrations of beams on a nonlinear elastic foundation were analyzed considering the effects of transverse shear deformation and the rotational inertia of beams. A weak form quadrature element method (QEM) is used for the vibration analysis. The fundamental frequencies of beams are presented for various slenderness ratios and nonlinear foundation parameters for both slender and short beams. The results for slender beams compare well with finite element results. The analysis shows that the transverse shear de-formation and the nonlinear foundation parameter significantly affect the fundamental frequency of the beams.

  1. The Foundation of Morality

    OpenAIRE

    Juul-Larsen, Astrid; Cathmont-Prynn, Penelope Josefine; Magnúsdóttir, Gu∂rún Ása; Brudvig, Mette Rubeck; Kirkegaard, Marie Louise

    2008-01-01

    In this project we have been working on the phenomenon of morality, more specifically the foundation in relation to religion. We have been looking into both psychology and philosophy, in aim to find answers to our research. As main objects of investigation we have worked with the philosopher and psychologist William James, along with the theologian Paul Tillich. Furthermore we have looked into the Divine command theory, along with several theories and arguments from various professionals with...

  2. Foundations of image science

    CERN Document Server

    Barrett, Harrison H

    2013-01-01

    Winner of the 2006 Joseph W. Goodman Book Writing Award! A comprehensive treatment of the principles, mathematics, and statistics of image science In today's visually oriented society, images play an important role in conveying messages. From seismic imaging to satellite images to medical images, our modern society would be lost without images to enhance our understanding of our health, our culture, and our world. Foundations of Image Science presents a comprehensive treatment of the principles, mathematics, and st

  3. Stochastic Games. I. Foundations,

    Science.gov (United States)

    1982-04-01

    stimulate discussion and critical coment. Requests for single copies of a Paper will be filled by the Cowles Foundation within the limits of the supply...underpinning for the theory of stochastic games. Section 2 is a reworking of the Bevley- Kohlberg result integrated with Shapley’s; the "black magic" of... Kohlberg : The values of the r-discount game, and the stationary optimal strategies, have Puiseaux expansions. L.. 11" 6 3. More generally, consider an

  4. Buckling of Bucket Foundations

    DEFF Research Database (Denmark)

    Madsen, Søren; Andersen, Lars Vabbersgaard; Ibsen, Lars Bo

    2012-01-01

    In this paper, the risk of structural buckling during installation of large-diameter bucket foundations is addressed using numerical methods. Imperfect geometries are introduced based on the pre-buckling mode shapes from a linear Eigenvalue buckling analysis. Various imperfect geometries...... are introduced to reveal how sensitive the buckling load is to the mentioned imperfections. Including the first 21 mode shapes as imperfect geometries reduces the buckling pressure compared to only considering mode 1....

  5. Topological Foundations of Electromagnetism

    CERN Document Server

    Barrett, Terrence W

    2008-01-01

    Topological Foundations of Electromagnetism seeks a fundamental understanding of the dynamics of electromagnetism; and marshals the evidence that in certain precisely defined topological conditions, electromagnetic theory (Maxwell's theory) must be extended or generalized in order to provide an explanation and understanding of, until now, unusual electromagnetic phenomena. Key to this generalization is an understanding of the circumstances under which the so-called A potential fields have physical effects. Basic to the approach taken is that the topological composition of electromagnetic field

  6. Mathematical foundations of thermodynamics

    CERN Document Server

    Giles, R; Stark, M; Ulam, S

    2013-01-01

    Mathematical Foundations of Thermodynamics details the core concepts of the mathematical principles employed in thermodynamics. The book discusses the topics in a way that physical meanings are assigned to the theoretical terms. The coverage of the text includes the mechanical systems and adiabatic processes; topological considerations; and equilibrium states and potentials. The book also covers Galilean thermodynamics; symmetry in thermodynamics; and special relativistic thermodynamics. The book will be of great interest to practitioners and researchers of disciplines that deal with thermodyn

  7. Design of road foundations

    OpenAIRE

    Thom, Nicholas

    1988-01-01

    Research has been conducted into the fundamental mechanical properties of a granular material. This has involved the use of both a repeated load triaxial apparatus and a new hollow cylinder apparatus, which has required development and modification. Building on the foundation of earlier research at Nottingham, models have been developed which predict the stress-strain behaviour of a dry granular material under any combination of applied stresses. This includes repeatable elastic behaviour and...

  8. Wronski's Foundations of Mathematics.

    Science.gov (United States)

    Wagner, Roi

    2016-09-01

    Argument This paper reconstructs Wronski's philosophical foundations of mathematics. It uses his critique of Lagrange's algebraic analysis as a vignette to introduce the problems that he raised, and argues that these problems have not been properly appreciated by his contemporaries and subsequent commentators. The paper goes on to reconstruct Wronski's mathematical law of creation and his notions of theory and techne, in order to put his objections to Lagrange in their philosophical context. Finally, Wronski's proof of his universal law (the expansion of a given function by any series of functions) is reviewed in terms of the above reconstruction. I argue that Wronski's philosophical approach poses an alternative to the views of his contemporary mainstream mathematicians, which brings up the contingency of their choices, and bridges the foundational concerns of early modernity with those of the twentieth-century foundations crisis. I also argue that Wronski's views may be useful to contemporary philosophy of mathematical practice, if they are read against their metaphysical grain.

  9. The effect of nanoparticles and humic acid on technology critical element concentrations in aqueous solutions with soil and sand.

    Science.gov (United States)

    Stepka, Zane; Dror, Ishai; Berkowitz, Brian

    2017-08-23

    As a consequence of their growing use in electronic and industrial products, increasing amounts of technology critical elements (TCEs) are being released to the environment. Currently little is known about the fate of many of these elements. Initial research on their potential environmental impact identifies TCEs as emerging contaminants. TCE movement in the environment is often governed by water systems. Research on "natural" waters so far demonstrates that TCEs tend to be associated with suspended particulate matter (SPM), which influences TCE aqueous concentrations (here: concentration of TCEs in dissolved form and attached to SPM) and transport. However, the relative potential of different types of SPM to interact with TCEs is unknown. Here we examine the potential of various types of particulate matter, namely different nanoparticles (NPs; Al2O3, SiO2, CeO2, ZnO, montmorillonite, Ag, Au and carbon dots) and humic acid (HA), to impact TCE aqueous concentrations in aqueous solutions with soil and sand, and thus influence TCE transport in soil-water environments. We show that a combination of NPs and HA, and not NPs or HA individually, increases the aqueous concentrations of TCEs in soil solutions, for all tested NPs regardless of their type. TCEs retained on SPM, however, settle with time. In solutions with sand, HA alone is as influential as NPs+HA in keeping TCEs in the aqueous phase. Among NPs, Ag-NPs and Au-NPs demonstrate the highest potential for TCE transport. These results suggest that in natural soil-water environments, once TCEs are retained by soil, their partitioning to the aqueous phase by through-flowing water is unlikely. However, if TCEs are introduced to soil-water environments as part of solutions rich in NPs and HA, it is likely that NP and HA combinations can increase TCE stability in the aqueous phase and prevent their retention on soil and sand, thus facilitating TCE transport. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Design of Offshore Wind Power Foundation with Multi-bucket

    Institute of Scientific and Technical Information of China (English)

    张浦阳; 石建超; 丁红岩; 郭耀华

    2016-01-01

    Three- and four-bucket offshore wind power foundations with a new form of force-transferring structure are proposed in this paper, and the integrated finite element model of foundation-soil-transition structure is established by using ABAQUS. The carrying capacity of the proposed foundations is studied under vertical load, horizontal load and bending moment. It can be seen that the vertical bearing capacity of multi-bucket foundation can be roughly estimated by the vertical bearing capacity of single-bucket; the horizontal bearing capacity of the three-bucket foundation scheme is controlled by displacement, while that of the four-bucket foundation scheme is controlled by the internal forces of soils. Moreover, the carrying capacity is provided by the overall structure formed by multi-bucket before soil failure. Compared with the conventional single-bucket foundation, there are mainly tension and pressure that are applied to the multi-bucket foundation, so that the carrying capacity of the foundation can be fully utilized. The probability of soil failure can be well reduced with the proposed multi-bucket foundation, and the stress transmission of force-transferring structure is more consistent through steel beams with variable cross-section.

  11. Theoretical Foundation and Limitation of Two-Step Anodizing Technology%二次阳极氧化技术的理论依据及其局限性

    Institute of Scientific and Technical Information of China (English)

    朱绪飞; 韩华; 戚卫星; 路超; 蒋龙飞; 段文强

    2012-01-01

    二次阳极氧化技术在多孔阳极氧化铝和氧化钛纳米管的制备过程中得到广泛应用,但其理论依据还不清楚。本文详细综述了二次阳极氧化和预压印技术的由来及其理论依据,阐明了二次阳极氧化过程中传统"场致助溶"理论无法解释的实验事实,分析了二次阳极氧化和预压印技术在多孔阳极氧化铝制备中的局限性和前提条件,并用氧气气泡模型对文献中报道的一些特殊孔道的形成机制进行了诠释,揭示了气泡模具和氧化物的黏性流动对圆柱形、规则有序孔道的形成的重要影响,展望了电子电流和氧气气泡模具对多孔氧化铝、氧化钛纳米管的制备和结构调控的指导作用。本综述对阳极氧化钛纳米管的制备和机理的深入研究,促进其在光催化和太阳能电池领域的应用有重要的意义。%Two-step anodizing technology (TSAT) has been used widely in the assembling process of porous anodic alumina and porous anodic TiO2 nanotubes. However, the theoretical background and foundation of TSAT are still unclear because of the ambiguous interpretations about the pore generation. A detailed introduction to the origin and theoretical foundation of the TSAT and imprinting technology is presented. The unexplainable experiment phenomena in two-step anodizing process which traditional theories (e. g. the field-assisted dissolution or ejection) can not explain and the limitation and using conditions of the TSAT and imprinting technology are analyzed. The explanation for these conflicting phenomena reported in the published references is given via the oxygen bubbles model. The important effect of the oxygen bubbles mould and the viscous flow of barrier oxide on the formation of columnar and regular channels is emphasized. The electronic current, ionic current and oxygen bubble mould will play an important role in the structural modulation of porous anodic alumina and porous anodic titania

  12. The foundational ontology library ROMULUS

    CSIR Research Space (South Africa)

    Khan, ZC

    2013-09-01

    Full Text Available A purpose of a foundational ontology is to solve interoperability issues among domain ontologies and they are used for ontology- driven conceptual data modelling. Multiple foundational ontologies have been developed in recent years, and most of them...

  13. Scour around Offshore Windturbine Foundations

    DEFF Research Database (Denmark)

    Larsen, Brian Juul; De Vos, Leen; Frigaard, Peter

    For the present report a testprogramme has been performed to determine the scour around offshore windturbine foundations.......For the present report a testprogramme has been performed to determine the scour around offshore windturbine foundations....

  14. Brain and Behavior Research Foundation.

    Science.gov (United States)

    ... Stress Disorder View All > Donate DONATE TODAY! > The Brain & Behavior Research Foundation is committed to alleviating the suffering caused ... and breakthroughs in scientific research. Copyright © 2016 the brain & behavior research foundation Privacy Policy Legal Notices and Disclaimers

  15. Comparative Study of Metadata Elements Used in the Website of Central Library of Universities Subordinate to the Ministry of Science, Research and Technology with the Dublin Core Metadata Elements

    Directory of Open Access Journals (Sweden)

    Kobra Babaei

    2012-03-01

    Full Text Available This research has been carried out with the aim of studying the web sites of central libraries of universities subordinate to the Ministry of Science, Research and Technology usage of metadata elements and its comparison with Dublin Core standard elements. This study was a comparative survey, in which 40 websites of academic library by using Internet Explorer browser. Then the HTML pages of these websites were seen through the Source of View menu, and metadata elements of each websites were extracted and entered in the checklist. Then, with using descriptive statistics (frequency, percentage and mean analysis of data was discussed. Research findings showed that the reviewed websites did not use any Dublin Core metadata elements, general metadata Markup language used in design of all websites, the amount of metadata elements used in website, Central Library of Ferdowsi University of Mashhad and Iran Science and Industries with 57% in first ranked and Shahid Beheshti University with 49% in second ranked and the International University of Imam Khomeini with 40% was in third ranked. The approach to web designers was determined too that as follows: the content of source in first ranked and attention to physical appearance source in second ranked and also ownership of source in third position.

  16. Control and adaptation in telecommunication systems mathematical foundations

    CERN Document Server

    Popovskij, Vladimir; Titarenko, Larysa

    2011-01-01

    This book is devoted to mathematical foundations providing synthesis and analysis of control and adaptation algorithms targeting modern telecommunication systems (TCS). The most popular technologies and network management methods are discussed.

  17. Philosophy of information and foundation for the future Chinese philosophy of science and technology%信息哲学与未来中国科技哲学的基础

    Institute of Scientific and Technical Information of China (English)

    刘钢

    2007-01-01

    The research programme of the philosophy of information (PI)proposed in 2002 made it an independent area or discipline in philosophical research.The scientific concept of 'information' is formally accepted in philosophical inquiry.Hence a new and tool-driven philosophical discipline of PI with its interdisciplinary nature has been established.Philosophy of information is an' orientative' rather than' cognitive' philosophy.When PI is under consideration in the history of Western philosophy,it can be regarded as a shift of large tradition.There are three large traditions at large,known as Platonic,Kantian and Leibniz-Russellian.In the discussion of the position of the possible worlds,we have modal Platonism and modal realism,but both of the theories are made in the framework of Western philosophy.In this essay,it is argued that possible worlds could be seen as worlds in information,which is then an interpretation of modal information theory (MIT).Our interpretation is made on the basis of Leibniz's lifelong connection With China,a fact often overlooked by the Western philosophers.Possible world theory was influenced by the Neo-Confucianism flourishing since the Song Dynasty of China,the foundation of which is Yijing.It could be argued that Leibniz's possible world theory was formulated in respect to the impact of the thoughts reflected in Yijing,in that one of the prominent features is the model-theoretic construction of theories.There are two approaches to theory construction,i.e.,axiom-theoretic and model-theoretic.The origin of the former is from ancient Greece and the latter from ancient China.And they determined the different features of theoretic structures between the oriental and occidental traditions of science and technology.The tendency of the future development of science and technology is changing from the axiom-theoretic to the model-theoretic orientation,at least the two approaches being complementary each other.To some extent,this means the

  18. Wave Forces on Windturbine Foundations

    DEFF Research Database (Denmark)

    Larsen, Brian Juul; Frigaard, Peter

    A testprogramme has been performed to determine the wave forces on two types of foundations for an offshore windturbine. the tested foundation types are a monopile and cone. Furthermore the shaft of the cone has been tested.......A testprogramme has been performed to determine the wave forces on two types of foundations for an offshore windturbine. the tested foundation types are a monopile and cone. Furthermore the shaft of the cone has been tested....

  19. Instant Zurb Foundation 4

    CERN Document Server

    Arévalo, Jorge

    2013-01-01

    A quick and easy guide that follows a practical approach to rapidly create responsive web pages using Foundation 4 framework, following the mobile-first philosophy.If you are a web developer who wants to get the most out of your HTML5/CSS/JavaScript skills, this book is ideal for you. It is assumed that you will have some experience with these languages, but for those who don't, you can also be up and running in an instant.

  20. Mathematical foundations of elasticity

    CERN Document Server

    Marsden, Jerrold E

    1994-01-01

    This advanced-level study approaches mathematical foundations of three-dimensional elasticity using modern differential geometry and functional analysis. It is directed to mathematicians, engineers and physicists who wish to see this classical subject in a modern setting with examples of newer mathematical contributions. Prerequisites include a solid background in advanced calculus and the basics of geometry and functional analysis.The first two chapters cover the background geometry ― developed as needed ― and use this discussion to obtain the basic results on kinematics and dynamics of con

  1. Foundations of Inference

    Directory of Open Access Journals (Sweden)

    Kevin H. Knuth

    2012-06-01

    Full Text Available We present a simple and clear foundation for finite inference that unites and significantly extends the approaches of Kolmogorov and Cox. Our approach is based on quantifying lattices of logical statements in a way that satisfies general lattice symmetries. With other applications such as measure theory in mind, our derivations assume minimal symmetries, relying on neither negation nor continuity nor differentiability. Each relevant symmetry corresponds to an axiom of quantification, and these axioms are used to derive a unique set of quantifying rules that form the familiar probability calculus. We also derive a unique quantification of divergence, entropy and information.

  2. System Reliability Analysis: Foundations.

    Science.gov (United States)

    1982-07-01

    performance formulas for systems subject to pre- ventive maintenance are given. V * ~, , 9 D -2 SYSTEM RELIABILITY ANALYSIS: FOUNDATIONS Richard E...reliability in this case is V P{s can communicate with the terminal t = h(p) Sp2(((((p p)p) p)p)gp) + p(l -p)(((pL p)p)(p 2 JLp)) + p(l -p)((p(p p...For undirected networks, the basic reference is A. Satyanarayana and Kevin Wood (1982). For directed networks, the basic reference is Avinash

  3. Foundations of Power

    DEFF Research Database (Denmark)

    Lev, Amnon

    The categories of law play an essential part in the elaboration of the concept of the modern state. From the 17th century society is perceived to be the product of the free will of its citizens, as expressed in their consent to the social contract. Contract thus becomes the conceptual foundation...... in which human freedom is translated into civil authority. The system of this translation is natural law.   The dissertation traces the genesis and the disintegration of the tradition of modern natural law in the period from the 17th to the 19th century. It shows how the format of 20th century...

  4. BrightFocus Foundation

    Science.gov (United States)

    ... development of Alzheimer’s disease, and how targeting specific elements of the inflammatory process could be useful in ... the community of Stall Catchers – the first online game to crowdsource Alzheimer’s disease (AD) research. Tuesday, November ...

  5. Problem solving in foundation engineering using foundationPro

    CERN Document Server

    Yamin, Mohammad

    2016-01-01

    This book is at once a supplement to traditional foundation engineering textbooks and an independent problem-solving learning tool. The book is written primarily for university students majoring in civil or construction engineering taking foundation analysis and design courses to encourage them to solve design problems. Its main aim is to stimulate problem solving capability and foster self-directed learning. It also explains the use of the foundationPro software, available at no cost, and includes a set of foundation engineering applications. Taking a unique approach, Dr. Yamin summarizes the general step-by-step procedure to solve various foundation engineering problems, illustrates traditional applications of these steps with longhand solutions, and presents the foundationPro solutions. The special structure of the book allows it to be used in undergraduate and graduate foundation design and analysis courses in civil and construction engineering. The book stands as valuable resource for students, faculty, ...

  6. Excavationless Exterior Foundation Insulation Field Study

    Energy Technology Data Exchange (ETDEWEB)

    Schirber, T. [NorthernSTAR, Minneaplolis, MN (United States); Mosiman, G. [NorthernSTAR, Minneaplolis, MN (United States); Ojczyk, C. [NorthernSTAR, Minneaplolis, MN (United States)

    2014-09-01

    Building science research supports installing exterior (soil side) foundation insulation as the optimal method to enhance the hygrothermal performance of new homes. With exterior foundation insulation, water management strategies are maximized while insulating the basement space and ensuring a more even temperature at the foundation wall. However, such an approach can be very costly and disruptive when applied to an existing home, requiring deep excavation around the entire house. The NorthernSTAR Building America Partnership team implemented an innovative, minimally invasive foundation insulation upgrade technique on an existing home. The approach consisted of using hydrovac excavation technology combined with liquid insulating foam. The team was able to excavate a continuous 4 inches wide by 4 feet to 5 feet deep trench around the entire house, 128 linear feet, except for one small part under the stoop that was obstructed with concrete debris. The combination pressure washer and vacuum extraction technology also enabled the elimination of large trenches and soil stockpiles normally produced by backhoe excavation. The resulting trench was filled with liquid insulating foam, which also served as a water-control layer of the assembly. The insulation was brought above grade using a liquid foam/rigid foam hybrid system and terminated at the top of the rim joist. Cost savings over the traditional excavation process ranged from 23% to 50%. The excavationless process could result in even greater savings since replacement of building structures, exterior features, utility meters, and landscaping would be minimal or non-existent in an excavationless process.

  7. Excavationless Exterior Foundation Insulation Field Study

    Energy Technology Data Exchange (ETDEWEB)

    Schirber, T.; Mosiman, G.; Ojczyk, C.

    2014-10-01

    Building science research supports installing exterior (soil side) foundation insulation as the optimal method to enhance the hygrothermal performance of new homes. With exterior foundation insulation, water management strategies are maximized while insulating the basement space and ensuring a more even temperature at the foundation wall. However, such an approach can be very costly and disruptive when applied to an existing home, requiring deep excavation around the entire house. The NorthernSTAR Building America Partnership team implemented an innovative, minimally invasive foundation insulation upgrade technique on an existing home. The approach consisted of using hydrovac excavation technology combined with a liquid insulating foam. The team was able to excavate a continuous 4" wide by 4' to 5' deep trench around the entire house, 128 linear feet, except for one small part under the stoop that was obstructed with concrete debris. The combination pressure washer and vacuum extraction technology also enabled the elimination of large trenches and soil stockpiles normally produced by backhoe excavation. The resulting trench was filled with liquid insulating foam, which also served as a water-control layer of the assembly. The insulation was brought above grade using a liquid foam/rigid foam hybrid system and terminated at the top of the rim joist. Cost savings over the traditional excavation process ranged from 23% to 50%. The excavationless process could result in even greater savings since replacement of building structures, exterior features, utility meters, and landscaping would be minimal or non-existent in an excavationless process.

  8. Mathematical foundations of biomechanics.

    Science.gov (United States)

    Niederer, Peter F

    2010-01-01

    The aim of biomechanics is the analysis of the structure and function of humans, animals, and plants by means of the methods of mechanics. Its foundations are in particular embedded in mathematics, physics, and informatics. Due to the inherent multidisciplinary character deriving from its aim, biomechanics has numerous connections and overlapping areas with biology, biochemistry, physiology, and pathophysiology, along with clinical medicine, so its range is enormously wide. This treatise is mainly meant to serve as an introduction and overview for readers and students who intend to acquire a basic understanding of the mathematical principles and mechanics that constitute the foundation of biomechanics; accordingly, its contents are limited to basic theoretical principles of general validity and long-range significance. Selected examples are included that are representative for the problems treated in biomechanics. Although ultimate mathematical generality is not in the foreground, an attempt is made to derive the theory from basic principles. A concise and systematic formulation is thereby intended with the aim that the reader is provided with a working knowledge. It is assumed that he or she is familiar with the principles of calculus, vector analysis, and linear algebra.

  9. Consumo tecnológico y educación tecnológica: fundamentos filosóficos para un proyecto futuro Technological consumption and technological education: philosophical foundations for a future project

    Directory of Open Access Journals (Sweden)

    Fernando Tula Molina

    2011-01-01

    Full Text Available Se presentan cuatro conceptos que se consideran claves para reformular la educación en tecnología, con el objetivo de orientar el rumbo en la construcción colectiva de relaciones más equitativas y participativas entre innovación tecnológica y metas sociales. Estos conceptos son los de "código técnico" (A. Feenberg, "epistemología cívica" (J. Jasanoff, "ciudadanía socio-técnica" (H. Thomas y "contexto de implicación" (F. Tula Molina. Se plantea una relación de sinergia entre tales conceptos en una visión amplia que considera a los estudiantes principalmente en su dimensión ciudadana, pensándolos como futuros jueces, abogados, economistas, ingenieros, educadores, etc. Bajo esta consideración se busca proporcionarles una opinión crítica e informada sobre las políticas tecnológicas que los afectarán tanto en su dimensión humana como social. Resulta razonable esperar que la formación adquirida permita al alumno desarrollar actitudes de responsabilidad personal en relación con el ambiente natural y la calidad de vida. Con esta línea curricular que los alumnos adquieran capacidades críticas para la participación en las instituciones donde se elaboran, diseñan y regulan las innovaciones tecnológicas y sus prácticas asociadas. Desde mi punto de vista, este abordaje permite que el sistema educativo consolide los procesos de alfabetización tecnológica con una posición activa hacia la participación ciudadana responsable.Four concepts are presented herein, deemed keys to reformulating technological education, with the purpose of guiding the collective construction of more equitable and participative relationships between technological innovation and social goals. These concepts are: "technical code" (A. Feenberg, "civic epistemology" (J. Jasanoff, "socio-technical citizenship" (H. Thomas and "implication context" (F. Tula Molina. We propose a synergistic relationship between these concepts, through a broad perspective that

  10. Development of low-cost technology for the next generation of high efficiency solar cells composed of earth abundant elements

    Energy Technology Data Exchange (ETDEWEB)

    Agrawal, Rakesh [Purdue Univ., West Lafayette, IN (United States)

    2014-09-28

    The development of renewable, affordable, and environmentally conscious means of generating energy on a global scale represents a grand challenge of our time. Due to the “permanence” of radiation from the sun, solar energy promises to remain a viable and sustainable power source far into the future. Established single-junction photovoltaic technologies achieve high power conversion efficiencies (pce) near 20% but require complicated manufacturing processes that prohibit the marriage of large-scale throughput (e.g. on the GW scale), profitability, and quality control. Our approach to this problem begins with the synthesis of nanocrystals of semiconductor materials comprising earth abundant elements and characterized by material and optoelectronic properties ideal for photovoltaic applications, namely Cu2ZnSn(S,Se)4 (CZTSSe). Once synthesized, such nanocrystals are formulated into an ink, coated onto substrates, and processed into completed solar cells in such a way that enables scale-up to high throughput, roll-to-roll manufacturing processes. This project aimed to address the major limitation to CZTSSe solar cell pce’s – the low open-circuit voltage (Voc) reported throughout literature for devices comprised of this material. Throughout the project significant advancements have been made in fundamental understanding of the CZTSSe material and device limitations associated with this material system. Additionally, notable improvements have been made to our nanocrystal based processing technique to alleviate performance limitations due to the identified device limitations. Notably, (1) significant improvements have been made in reducing intra- and inter-nanoparticle heterogeneity, (2) improvements in device performance have been realized with novel cation substitution in Ge-alloyed CZTGeSSe absorbers, (3) systematic analysis of absorber sintering has been conducted to optimize the selenization process for large grain CZTSSe absorbers, (4) novel electrical

  11. Development of low-cost technology for the next generation of high efficiency solar cells composed of earth abundant elements

    Energy Technology Data Exchange (ETDEWEB)

    Agrawal, Rakesh [Purdue Univ., West Lafayette, IN (United States)

    2014-09-28

    The development of renewable, affordable, and environmentally conscious means of generating energy on a global scale represents a grand challenge of our time. Due to the “permanence” of radiation from the sun, solar energy promises to remain a viable and sustainable power source far into the future. Established single-junction photovoltaic technologies achieve high power conversion efficiencies (pce) near 20% but require complicated manufacturing processes that prohibit the marriage of large-scale throughput (e.g. on the GW scale), profitability, and quality control. Our approach to this problem begins with the synthesis of nanocrystals of semiconductor materials comprising earth abundant elements and characterized by material and optoelectronic properties ideal for photovoltaic applications, namely Cu2ZnSn(S,Se)4 (CZTSSe). Once synthesized, such nanocrystals are formulated into an ink, coated onto substrates, and processed into completed solar cells in such a way that enables scale-up to high throughput, roll-to-roll manufacturing processes. This project aimed to address the major limitation to CZTSSe solar cell pce’s – the low open-circuit voltage (Voc) reported throughout literature for devices comprised of this material. Throughout the project significant advancements have been made in fundamental understanding of the CZTSSe material and device limitations associated with this material system. Additionally, notable improvements have been made to our nanocrystal based processing technique to alleviate performance limitations due to the identified device limitations. Notably, (1) significant improvements have been made in reducing intra- and inter-nanoparticle heterogeneity, (2) improvements in device performance have been realized with novel cation substitution in Ge-alloyed CZTGeSSe absorbers, (3) systematic analysis of absorber sintering has been conducted to optimize the selenization process for large grain CZTSSe absorbers, (4) novel electrical

  12. Responsibility as the Foundation of Ethics

    DEFF Research Database (Denmark)

    Rendtorff, Jacob Dahl

    2016-01-01

    notion in order to understand the ethical duty in a modern technological civilisation. We can indeed observe a moralization of the concept of responsibility going beyond a strict legal definition in terms of imputability. The paper begins by discussing the humanistic foundations of such a concept......In this paper I would like to show the importance of the concept of responsibility as the foundation of ethics in particular in the fields of politics and economics in the modern civilisation marked by globalization and technological progres. I consider the concept of responsibility as the key...... of responsibility. It treats the historical origins of responsibility and it relates this concept to the concept of accountability. On the basis of this historical determination of the concept I would like to present the definition of the concept of responsibility as fundamental ethical principle that has...

  13. 溯本正源——试论高等医学教育国际化的核心要素%Seeking the Foundation: Core Element of Internationalization of Higher Medical Education

    Institute of Scientific and Technical Information of China (English)

    鲍臻; 董晓建

    2011-01-01

    Internationalization of education is becoming the indispensable strategy to school.Different scholars have different definitions for the internationalization of education.Its core elements include five aspects: educational philosophy, teaching system, personnel, scientific research and teaching resources.Correct understanding of these core elements is significant to gasping the direction of the implementation of the internationalization of education.%教育国际化正在成为办学办校不可缺少的重要战略.不同的学者对于教育国际化的定义各不相同,其核心要素包括了五个方面:办学理念、课程教学体系、人员、科学研究和教学资源.正确认识这些核心要素,对于把握教育国际化的实施方向具有重要的指导意义.

  14. Application of LOD Technology in Groundwater Finite Element Post-processing%LOD技术在地下水有限元后处理中的应用

    Institute of Scientific and Technical Information of China (English)

    毕振波; 郑爱勤; 崔振东

    2011-01-01

    地下水有限元后处理阶段的数据量较大,这对模开重现、网络快速传输和计算结果的实时可视化造成困难.为此,分析地下水有限元后处理中面临的主要问题和LOD技术,指出顶点元素删除法是一种适应地下水有限元后处理的有效数据模型简化方法,设计顶点删除和恢复过程中的主要数据结构,并应用DT方法对“空洞”进行局部三角剖分.实例证明该方法在地下水有限元后处理中应用的有效性.%It is difficult for the reproducing, the rapid transmission based on network and the real time visualization of calculated results of finite element models that there is a large amount of data in finite element post-processing stage in groundwater. Therefore, based on analyzing the main problems existing in the post-processing of finite element in groundwater and Level of Detail(LOD) technology, this paper argues that vertex element deletion method is a effective data model simplification techniques adapted for finite element post-processing in groundwater, the main data structures of vertex element deletion and restoring are designed, DT method is used for the local triangulation meshing in the "hole" area. The real implemented example proves the effectiveness of vertex element deletion algorithm applied to finite element post-processing in groundwater.

  15. Development of a macro-element by condensation, shown for the load categories of aircraft crash and seismic events, for soil-structure interaction in the case of flexible foundation. Entwicklung eines Makroelementes durch Kondensation am Beispiel der Lastfaelle Flugzeugabsturz und Erdbeben bei Boden-Bauwerk-Wechselwirkung mit biegeweichen Fundamenten

    Energy Technology Data Exchange (ETDEWEB)

    Matthees, W.

    1989-01-01

    This report presents the results of a three-dimensional model developed for the analysis of soil-structure interaction problems. The realistic treatment of the stiffness for the foundation plate avoids the restriction of lumped parameter models for one-dimensional beam-models with a rigid plate or for multi-dimensional models with distributed lumped parameters. The soil-behaviour is defined by the condensation of a limited soil section, called macro-element. An improved matrix radiation damping comparable with lumped parameters is resultant from the condensation of viscous dampers, situated along the boundaries of the soil section. The finess of discretization is similar for the soil and for the structure. The method is presented in the time domain for a linear axisymmetric code with lumped mass having a consistent mass coupling of the macro-element. By application of the macro-element a realistic three-dimensional system may be analyzed with a reasonable numerical effort. (orig.) With 80 figs., 3 tabs.

  16. Foundations of quantum gravity

    CERN Document Server

    Lindesay, James

    2013-01-01

    Exploring how the subtleties of quantum coherence can be consistently incorporated into Einstein’s theory of gravitation, this book is ideal for researchers interested in the foundations of relativity and quantum physics. The book examines those properties of coherent gravitating systems that are most closely connected to experimental observations. Examples of consistent co-gravitating quantum systems whose overall effects upon the geometry are independent of the coherence state of each constituent are provided, and the properties of the trapping regions of non-singular black objects, black holes, and a dynamic de Sitter cosmology are discussed analytically, numerically, and diagrammatically. The extensive use of diagrams to summarise the results of the mathematics enables readers to bypass the need for a detailed understanding of the steps involved. Assuming some knowledge of quantum physics and relativity, the book provides textboxes featuring supplementary information for readers particularly interested ...

  17. Instability during Installation of Foundations for Offshore Structures

    DEFF Research Database (Denmark)

    Madsen, Søren; Andersen, Lars Vabbersgaard; Ibsen, Lars Bo

    2012-01-01

    caisson”. During installation, suction is applied inside the bucket. The suction creates a pressure differential across the bucket lid, effectively increasing the downward force on the bucket while the water flow reduces the skirt tip resistance. The bucket foundation is constructed as a thin shell......If current technology is used when wind turbines are located in deeper water, the cost of the foundations will increase dramatically. Thus, a new technology is needed to reduce the total cost of offshore wind turbines. A candidate technology could be the bucket foundation, also called a “suction...... as the pile is penetrating through a soil of high stiffness. This paper deals with structural instability issues related to slender, circular cylindrical offshore foundations during installation. The authors present the previous work done by other authors within this field, highlighting the key issues...

  18. The multi-element ultrasonic technology: examples of application on military naval structures; La technologie ultrasonore multi-elements: exemples d'applications sur les structures navales militaires

    Energy Technology Data Exchange (ETDEWEB)

    Recolin, P.; Rivalin, S. [CESMAN -DCNS, 75 - Paris (France)

    2009-07-01

    DCNS is the European leader in the military ship construction and maintenance (conventional and nuclear propulsion). The potential of ultrasonic technologies with multi-element probes has been studied in its Materials laboratory since the end of the 80's, and a growing number of applications has appeared these last ten years. A series of examples is given: in-service nuclear reactor pipe welds monitoring, time-of-flight diffraction (TOFD) technique for the inspection of containment welds, coating fabrication control, detection of laminating corrosion on aluminum rings, detection of corrosion on submarine hulls in basin, inspection of hull welded joints

  19. Prototype bucket foundation for wind turbines - natural frequency estimation

    Energy Technology Data Exchange (ETDEWEB)

    Ibsen, Lars Bo; Liingaard, M.

    2006-12-15

    The first full scale prototype bucket foundation for wind turbines has been installed in October 2002 at Aalborg University offshore test facility in Frederikshavn, Denmark. The suction caisson and the wind turbine have been equipped with an online monitoring system, consisting of 15 accelerometers and a real-time data-acquisition system. The report concerns the in service performance of the wind turbine, with focus on estimation of the natural frequencies of the structure/foundation. The natural frequencies are initially estimated by means of experimental Output-only Modal analysis. The experimental estimates are then compared with numerical simulations of the suction caisson foundation and the wind turbine. The numerical model consists of a finite element section for the wind turbine tower and nacelle. The soil-structure interaction of the soil-foundation section is modelled by lumped-parameter models capable of simulating dynamic frequency dependent behaviour of the structure-foundation system. (au)

  20. Foundation and static analysis of calcaneal three-dimensional finite element model%跟骨三维有限元模型的建立与静态分析

    Institute of Scientific and Technical Information of China (English)

    黄海晶; 王捷; 马建雄; 张清功; 王志彬; 金鸿宾

    2010-01-01

    目的 建立一个基于健康人体的跟骨三维有限元模型,静态分析双足站立相时跟骨内部的生物力学特性,探讨跟骨骨折疼痛的内外侧应力不均衡因素.方法 选取1名健康男性志愿者,年龄28岁,体重64kg.采用16排螺旋CT对足部沿横断面连续扫描,将符合DICOM 3.0标准的CT断层图像导入MIMICS10.1中,设定阈值为226~3071 Houfield unit,确定方位后经手动编辑、区域增长、形态学操作及空洞处理等,生成足部的三维模型,从整个足部模型中提取跟骨模型.对跟骨进行面网格的优化处理后,导入ANSYS10.0中得到体网格模型.根据CT断层图像的灰度值完成模型材质的添加,生成最终的三维有限元模型.模拟研究对象双足静止站立的状态,距下关节面在整个分析过程中被全约束,自足跟及跟腱附着点处对模型分别施加垂直向上的320 N和160 N载荷,观察跟骨的Vonmises应力分布.结果 MIMICS软件能够迅速建立更为精确的有限元模型,当垂直载荷作用于跟骨后,跟骨内、外侧存在一定的应力不均衡因素.跟骨的外侧结构是明显的薄弱区域,随着跟骨外侧壁的应力增加,导致继发外侧畸形,压迫腓骨长短肌及跟骰关节产生疼痛.结论 创建的跟骨三维有限元模型,经验证是一个较为精确的正常跟骨三维模型,可用于理解跟骨内部的应力分布变化.%Objective To establish a more rapid and precise calcaneal three-dimensional (3D) finite element model based on the healthy human foot, to analyze the internal biomechanical properties of calcaneus, and to explore the relationship between caleaneal fracture pain with the stress imbalance factors in medial and lateral side of calcaneus. Methods One healthy male volunteer (28 years old, 64 kg) was selected. Input DICOM 3.0 standard CT sectional images into MIMICS10.1 software, set the threshold of 226-3071 Houfield unit, generate foot 3D model, extract caleaneus

  1. Adaptability to geological faulted foundation of Hardfill dam

    Institute of Scientific and Technical Information of China (English)

    Kun XIONG; Yunlong HE; Yunfeng PENG

    2008-01-01

    Hardfill dam is a new type of dam which has the advantages of low stress level and even stress distri-bution in a dam body, resulting in low demands to foun-dations. Based on 2D linear elastic and elasto-plastic calculations of gravity dam and Hardfill dam using finite element method (FEM), the stress distribution in a dam body and anti-sliding stabilization is analyzed on the geo-logical faulted foundations with weak weathered rock and soft interlayers. It is concluded that Hardfill dams have better adaptability to geological faulted foundations than gravity dams and is more secure and economically sound.

  2. Search strategy for relevant parasitic elements and reduction of their influence on the operation of SC FIR filters realized in CMOS technology

    Science.gov (United States)

    Dlugosz, Rafal

    2005-06-01

    Parasitic capacities pose a serious problem in switched capacitor finite impulse response (SC FIR) filters realized as VLSI systems in CMOS submicron technologies. The influence of these parasitic elements is especially visible in the stopband of the filter frequency response. To design mixed digital-analog SC FIR filters is a difficult task. Filters of this class have to be designed using full-custom method. SC FIR filters of high orders N are very complex systems with thousands of transistors, capacitors, which, in turn, make the basis for many active elements, switches, delay elements, memories and other circuitry. One of the most important stages during the design process is post-layout HSPICE verification. However, the simulation of separated blocks does not suffice to have enough knowledge of the operation of the whole system. Optimization requires netlist simulations of the entire system, with presence of typically between 5000-30000 of parasitic capacities, where only about hundred of them are critical ones. Analysis which aims at finding these elements, in practice, is not possible because of the complexity of the entire system. The heuristic method of searching for relevant parasitic elements presented in this paper is based on the assumption that all parasitic elements create a set. The main task is to divide this set into subareas. In order to do this particular groups of nets in the layout must be labeled using unique names. Then particular groups of parasitic elements are filtered out from the netlist. Each filtering stage generates two netlists with separate areas of parasitic elements. After the analysis of the simulation results has been done there remains to make the decision concerning subsequent filtering operations. The iteration method is very quick, convenient, efficient and does not require deep knowledge of the simulated system. Many stages of this method can be easy implemented with CAD tools. In realized projects, after no more than 15

  3. Foundations for low cost buildings

    Directory of Open Access Journals (Sweden)

    Sayed Abdel Salam

    2017-04-01

    Full Text Available Attaining an economical and safe design of structures is regarded as a prerequisite for the structural engineer. The market prices of reinforcing steels have dramatically soared in recent years internationally. Therefore, the purpose of the current paper is not just reducing the ratio of reinforcing steel in the foundations for skeleton structures, but rather minimizing this ratio through choosing the most effective footing shape (folded strip footings. Folded footings have been used as an alternative to the conventional rectangular strip footings. The height of the studied model is ten floors. Two different foundation systems are used in the analysis namely; rectangular strip footings, and folded strip footings respectively. Both footing shapes will be designed as continuous footings with grid shape under the building. Comparison between the two systems is also presented regarding the concrete sections and reinforcement ratio under the same applied loads. The finite element analysis software ADINA is used in modeling and analysis of the structural and geotechnical behavior of both types of footings, with emphasis on the effect of changing the footing shape on the stresses in the footing concrete body and the underlying soils. Research results presents the internal stresses within the footing and soil domains, as well as the contact pressure distribution for a reinforced folded strip footing resting on different soil types. The influence of folding inclination angle, and soil type on the results are also studied. Results showed that folded strip footings are efficient in reducing the amount of needed reinforcements, and such efficiency in reducing the required steel reinforcement in the footings is depending on the applied footing loads, and to some degree on the soil type and properties. Reduction in the reinforcement ratio between the rectangular and folded footing types is about 26% in favor of the folded strip footings. A comparative

  4. Critical trace elements in brewing technology. Pt. 2. Occurrence of arsenic, lead, cadmium, chromium, mercury and selenium in beer

    Energy Technology Data Exchange (ETDEWEB)

    Donhauser, S.; Wagner, D.; Jacob, F.

    1987-01-01

    A study of 100 beer samples gave a representative cross-section of the amount of critical trace elements in beers. The following average values were obtained. Arsenic 6,4 ..mu..g/l, chromium 7,5 ..mu..g/l, lead 1,6 ..mu..g/l, mercury < 0,5 ..mu..g/l, cadmium 0,2 ..mu..g/l, selenium 1,2 ..mu..g/l. The drinking water limit value was just exceeded with two beers and by more than two-fold with one beer. The concentration of elements in the other beers were mostly well below the legal norm of the drinking water regulations. Separation of the samples according to beer container showed no significant difference with respect to trace element content between glass bottles and cans. Only 3 piece tinplate cans with a soldered body seam, which must have been damaged, contained beer with higher lead values. The trace element content of individual beer types did not differ from one another. An evaluation of the weakly intake of thee critical elements in beer, using these measured values, shows no cause for concern about health. (orig.)

  5. The logical foundations of mathematics

    CERN Document Server

    Hatcher, William S

    1981-01-01

    The Logical Foundations of Mathematics offers a study of the foundations of mathematics, stressing comparisons between and critical analyses of the major non-constructive foundational systems. The position of constructivism within the spectrum of foundational philosophies is discussed, along with the exact relationship between topos theory and set theory.Comprised of eight chapters, this book begins with an introduction to first-order logic. In particular, two complete systems of axioms and rules for the first-order predicate calculus are given, one for efficiency in proving metatheorems, and

  6. The Emmanuel Schools Foundation: Sponsoring and Leading Transformation at England's Most Improved Academy

    Science.gov (United States)

    Pike, Mark A.

    2009-01-01

    The Emmanuel Schools Foundation (ESF) has so far sponsored four schools in England. Beginning with Emmanuel College in Gateshead in 1990 (which remains a City Technology College) the Foundation sponsors the King's Academy in Middlesbrough, which opened in 2003, and Trinity Academy in Thorne near Doncaster, which opened in 2005. The Foundation's…

  7. Foundations of resilience thinking.

    Science.gov (United States)

    Curtin, Charles G; Parker, Jessica P

    2014-08-01

    Through 3 broad and interconnected streams of thought, resilience thinking has influenced the science of ecology and natural resource management by generating new multidisciplinary approaches to environmental problem solving. Resilience science, adaptive management (AM), and ecological policy design (EPD) contributed to an internationally unified paradigm built around the realization that change is inevitable and that science and management must approach the world with this assumption, rather than one of stability. Resilience thinking treats actions as experiments to be learned from, rather than intellectual propositions to be defended or mistakes to be ignored. It asks what is novel and innovative and strives to capture the overall behavior of a system, rather than seeking static, precise outcomes from discrete action steps. Understanding the foundations of resilience thinking is an important building block for developing more holistic and adaptive approaches to conservation. We conducted a comprehensive review of the history of resilience thinking because resilience thinking provides a working context upon which more effective, synergistic, and systems-based conservation action can be taken in light of rapid and unpredictable change. Together, resilience science, AM, and EPD bridge the gaps between systems analysis, ecology, and resource management to provide an interdisciplinary approach to solving wicked problems.

  8. The Delphi Technique in Identifying Learning Objectives for the Development of Science, Technology and Society Modules for Palestinian Ninth Grade Science Curriculum

    Science.gov (United States)

    Abualrob, Marwan M. A.; Daniel, Esther Gnanamalar Sarojini

    2013-01-01

    This article outlines how learning objectives based upon science, technology and society (STS) elements for Palestinian ninth grade science textbooks were identified, which was part of a bigger study to establish an STS foundation in the ninth grade science curriculum in Palestine. First, an initial list of STS elements was determined. Second,…

  9. Finite element procedures

    CERN Document Server

    Bathe, Klaus-Jürgen

    2015-01-01

    Finite element procedures are now an important and frequently indispensable part of engineering analyses and scientific investigations. This book focuses on finite element procedures that are very useful and are widely employed. Formulations for the linear and nonlinear analyses of solids and structures, fluids, and multiphysics problems are presented, appropriate finite elements are discussed, and solution techniques for the governing finite element equations are given. The book presents general, reliable, and effective procedures that are fundamental and can be expected to be in use for a long time. The given procedures form also the foundations of recent developments in the field.

  10. 论刑事补偿责任的归责基础与成立要件%On Liability of Criminal Indemnity Foundation and Established Elements in China

    Institute of Scientific and Technical Information of China (English)

    程捷

    2012-01-01

    国家补偿与国家赔偿是各自不同的概念,刑事司法补偿是以合法的刑事司法行为侵害公民合法权益为前提。将司法误认为国家权力行使中可以预期的风险,对无辜受害人予以调节性损害补偿的机制。我国《国家赔偿法》虽然没有明文承认刑事补偿,但第十七条第(二)、(三)项却可以理解为刑事补偿的制度依据。我国未来应在特别牺牲理论的指导下,进一步完善刑事补偿责任的适用范围与成立要件。%Criminal indemnity is a concept that is different from criminal compensation. Criminal justice indemnity is based on legitimate criminal judicial actions against the legitimate rights and interests of citizens, regarding the judicial mistake as the expected risk in exercising the state power and the regulatory mechanism of compensation for the damage to the innocent victims. Although the criminal indemnity is not expressly recognized in The State Compensation Law in China, the second and third item of Article 17 can be interpreted as the ground of criminal indemnity system. And future China should further enrich and improve the scope of criminal liability and the established elements under the theoretical guidance of special sacrifice.

  11. Morris Animal Foundation

    Science.gov (United States)

    ... eyes on Toulouse, a tiny, longhaired, dark gray kitten that seemed to appear out of nowhere. November 15, 2016 Fighting back against cancer with new technology Oyl the cat doesn’t care that the hair on his back has turned ...

  12. Critical Literacy: Foundational Notes

    Science.gov (United States)

    Luke, Allan

    2012-01-01

    The term "critical literacy" refers to use of the technologies of print and other media of communication to analyze, critique, and transform the norms, rule systems, and practices governing the social fields of everyday life (A. Luke, 2004). Since Freire's (1970) educational projects in Brazil, approaches to critical literacy have been developed…

  13. Critical Literacy: Foundational Notes

    Science.gov (United States)

    Luke, Allan

    2012-01-01

    The term "critical literacy" refers to use of the technologies of print and other media of communication to analyze, critique, and transform the norms, rule systems, and practices governing the social fields of everyday life (A. Luke, 2004). Since Freire's (1970) educational projects in Brazil, approaches to critical literacy have been…

  14. Critical Literacy: Foundational Notes

    Science.gov (United States)

    Luke, Allan

    2012-01-01

    The term "critical literacy" refers to use of the technologies of print and other media of communication to analyze, critique, and transform the norms, rule systems, and practices governing the social fields of everyday life (A. Luke, 2004). Since Freire's (1970) educational projects in Brazil, approaches to critical literacy have been…

  15. 有限元仿真在机械制造技术基础课程教学中的应用%Application of ifnite element simulation technology in teaching fundamentals of mechanical manufacturing technology

    Institute of Scientific and Technical Information of China (English)

    隋荣娟

    2014-01-01

    介绍了有限元软件ANSYS的基本功能和应用范围,以模拟金属的切削、挤压等过程为例,分析了有限元仿真模拟在机械制造技术基础课程教学中的应用。有限元仿真模拟应用于机械制造技术基础课程教学中,具有节约教学学时、提高教学质量等优点。%The basic function and application of the ifnite element software, ANSYS, is introduces. Taking the simulation of metal cutting and the extrusion process for example, the application of finite element simulation technology in teaching fundamentals of mechanical manufacturing technology is analyzed. The ifnite element simulation technology used in instruction can save the teaching hours, improve teaching quality, etc.

  16. [3D-TECHNOLOGIES AS A CORE ELEMENT OF PLANNING AND IMPLEMENTATION OF VIRTUAL AND ACTUAL RENAL SURGERY].

    Science.gov (United States)

    Glybochko, P V; Aljaev, Ju G; Bezrukov, E A; Sirota, E S; Proskura, A V

    2015-01-01

    The purpose of this article is to demonstrate the role of modern computer technologies in performing virtual and actual renal tumor surgery. Currently 3D modeling makes it possible to clearly define strategy and tactics of an individual patient treatment.

  17. George Mikenberg honoured by the Sharing Knowledge Foundation

    CERN Multimedia

    CERN Bulletin

    2016-01-01

    The Sharing Knowledge Foundation Prize was presented to the ATLAS physicist at a ceremony on 18 March.   ATLAS physicist George Mikenberg receives the Sharing Knowledge Foundation Prize. From left to right: Peter Jenni, former ATLAS Spokesperson, Rolf Heuer, former CERN Director-General, Frédérick Bordry, CERN Director for Accelerators and Technology, George Mikenberg, Patrick Fassnacht, CERN International Relations sector, Eliane Jacot-Des-Combes Mikenberg, Herwig Schopper, former CERN Director-General, Constantin Lanaras, treasurer of the Sharing Knowledge Foundation, Robert Klapisch, President of the Sharing Knowledge Foundation, Federico Saldana, logistical support, Catherine Cesarsky, Vice-President of the CERN Council, Eliezer Rabinovici, Vice-President of the CERN Council and of SESAME. (Image: Sophia Bennett/CERN) The Sharing Knowledge Foundation awarded its 2016 prize to George Mikenberg, a member of the LHC's ATLAS experiment who has been...

  18. Composite UHPC-AAC/CLC facade elements with modified interior plaster for new buildings and refurbishment. Materials and production technology

    Directory of Open Access Journals (Sweden)

    Lorenzo Miccoli

    2015-06-01

    Full Text Available The awareness of the environmental impact of the building sector is increasing. Steel reinforced concrete is the most commonly used construction material, though with a high-embodied energy and carbon footprint. Large environmental gains may arise if an alternative to steel reinforced concrete is developed. In this context, ultra-high performance concrete (UHPC materials are shown to be promising alternatives with advantages such as lower embodied energy and reduced environmental impact. Predictions suggest that UHPC composite elements for building envelopes could have other benefits such as an increased service life, optimised use of building area due to thinner elements and minimised maintenance due to the absence of reinforcement or use of non-corrosive reinforcing materials such as carbon fibres. In the framework of the H-HOUSE project funded by the European Commission, composite elements are developed. The aim is to create facade panels combining an autoclaved aerated concrete or cellular lightweight concrete insulation layer with an external UHPC supporting layer. To enhance occupant comfort and health, hygroscopic materials that are capable to buffer indoor air humidity shall be applied to the inside of such elements. Indoor air humidity levels are expected to be more stable, which shall subsequently improve the indoor climate and minimise potential decay to the construction.  

  19. Evolutionary Foundations of Mathematics

    CERN Document Server

    Tuncer, Ruhi

    2011-01-01

    We propose a simple cognitive model where qualitative and quantitative com- parisons enable animals to identify objects, associate them with their properties held in memory and make naive inference. Simple notions like equivalence re- lations, order relations are used. We then show that such processes are at the root of human mathematical reasoning by showing that the elements of totally ordered sets satisfy the Peano axioms. The process through which children learn counting is then formalized. Finally association is modeled as a Markov process leading to a stationary distribution.

  20. Antithetic Foundations of Economics

    Directory of Open Access Journals (Sweden)

    Marin Dinu

    2011-03-01

    Full Text Available This paper aims at decrypting the manner in which the foundations of Economics as a science and the meanings of the relevant explanatory formulas are being shaped. My analytical endeavor focuses on understanding the peculiarities of what is referred to as the object of study of the science known as Economics, an academic synthesis of concept-related breakthroughs regarding economicity. The explicit purpose of this analysis is to identify perennial benchmarks in economic cognition whereby this ensures its consistency. The implicit purpose is to shape a cognitive model in line with the specifics of the conceptual universe of Economics, as well as with the sources of the economic realities that are subject to a sui-generis relativism. The primary benefit of this endeavor consists in systemizing the conceptual prospects with an antithetic nature that allow for the explanations of the state of economic rationality and generate the understanding of what the source of economicity is and how it behaves. As such, the conclusions are marked by the stringent need of more precisely defining economic knowledge in order to match the changing nature of economic reality, as an expression that embraces the meeting point of two ontological vistas that are methodologically separated by some theories: human nature and human condition. Economics as a science thus features, apart from a conceptual substrate that needs to be spotted, an ontological background that needs to be revealed. The role played by this background appears to be most frequently ignored. The joint identification of both direct and contextual determinants for a sensitive area of humankind, i.e. the economy, is a direction to be followed by the royal path of rational knowledge.

  1. When Technique Is the Foundation of Health Care

    Science.gov (United States)

    Downing, Raymond

    2012-01-01

    One of the clearest examples of a technological system, in the sense that Ellul discussed it, is contemporary biomedical health care. The foundation of technological systems is technique: efficient methods for achieving isolated goals. However, the goal of health care should be to achieve health in the full sense of wholeness. Traditional healing…

  2. Foundation Degrees: A Risky Business?

    Science.gov (United States)

    Rowley, Jennifer

    2005-01-01

    Purpose: Foundation degrees, the new proposal for sub-degree vocational education in the UK, are characterised by innovation both in their design (curriculum, teaching, learning and assessment) and in the marketplace for which they are designed. This article argues that the development and delivery of foundation degrees carry a high level of risk,…

  3. Characteristic Behavior of Bucket Foundations

    DEFF Research Database (Denmark)

    Barari, Amin

    the design of offshore wind turbine foundations. The work was divided into two main research efforts: geotechnical engineering experiments to gain insight into the behavior of offshore bucket foundations, and development of methods to improve the study of infiltration into unsaturated soils, an important...

  4. Advanced electromagnetism foundations, theory and applications

    CERN Document Server

    Barrett, Terence W

    1995-01-01

    Advanced Electromagnetism: Foundations, Theory and Applications treats what is conventionally called electromagnetism or Maxwell's theory within the context of gauge theory or Yang-Mills theory. A major theme of this book is that fields are not stand-alone entities but are defined by their boundary conditions. The book has practical relevance to efficient antenna design, the understanding of forces and stresses in high energy pulses, ring laser gyros, high speed computer logic elements, efficient transfer of power, parametric conversion, and many other devices and systems. Conventional electro

  5. Static Behaviour of Bucket Foundations

    DEFF Research Database (Denmark)

    Larsen, Kim André

    . The monopod concept is investigated in this thesis, regarding the static behaviour from loads relevant to offshore wind turbines. The main issue in this concept is the rotational stiffness of the foundation and the combined capacity dominated by moments. The vertical bearing capacity of bucket foundations...... theory is proposed. The proposed expression applies to plane strain as well as axis-symmetric stress conditions for foundations with smooth or rough bases. A thorough experimental investigation of the static behaviour of bucket foundations subjected to combined loading is carried out. Laboratory tests...... method is concluded to be a superior method in estimating the post peak behaviour as well as the combined capacity of bucket foundations in relation to the offshore wind turbine problem....

  6. NEWS: Solid foundations?

    Science.gov (United States)

    2000-07-01

    Among the initiatives to be found at UK universities is a vocational award with the title `University Foundation Degree' at Nottingham Trent University. This qualification will be offered in 14 different subjects including four in the Faculty of Science and Mathematics, in the areas of applied biology, applied sciences, chemistry and physics. The courses will be available on a two-year full-time, three-year sandwich or a part-time basis. Set at a higher standard and specification than the Higher National Diplomas which it replaces, the UFD has been devised in consultation with industry and will cover the technical and specialist areas demanded by employers to combat skills shortages. The UFD in applied sciences concentrates on practical applications through laboratory, IT and project work, supported by lectures and seminars. At the end students can enter the employment market or transfer onto the second year of a degree course. Science-based careers including research and development would be the aim of those taking the UFD in physics. The first year develops the fundamentals of modern physics supported by studies in mathematics, IT and computer programming, whilst year 2 is vocational in nature with industrial problem solving and work experience as well as an academic theme associated with environmental aspects of the subject. Those who complete the UFD will be allowed automatic progression to a specified honours degree course and would normally be expected to study for a further two years for this award. However, those demonstrating an outstanding academic performance can transfer to the linked degree programme at the end of the first year via fast-track modules. Back in May the UK's Quality Assurance Agency (QAA) announced new standard benchmarks for degrees. These will be introduced into higher education institutions from 2002 to outline the knowledge, understanding and skills a student should gain from a particular higher education course. These benchmark

  7. Evaluation of flyash surface phenomena and the application of surface analysis technology. Summary report: Phase I. [44 elements; 86 references

    Energy Technology Data Exchange (ETDEWEB)

    Smith, R.D.

    1981-06-01

    The factors governing the formation of flyash surfaces during and following coal combustion are reviewed. The competing chemical and physical processes during the evolution of inorganic material in coal during combustion into flyash are described with respect to various surface segregation processes. Two mechanisms leading to surface enrichment are volatilization-condensation processes and diffusion processes within individual flyash particles. The experimental evidence for each of these processes is reviewed. It is shown that the volatilization-condensation process is the major factor leading to trace element enrichment in smaller flyash particles. Evidence also exists from surface analyses of flyash and representative mineral matter that diffusion processes may lead to surface enrichment of elements not volatilized or cause transport of surface-condensed elements into the flyash matrix. The semiquantitative determination of the relative importance of these two processes can be determined by comparison of concentration versus particle size profiles with surface-depth profiles obtained using surface analysis techniques. A brief description of organic transformations on flyash surfaces is also presented. The various surface analytical techniques are reviewed and the relatively new technique of Static-Secondary Ion Mass Spectroscopy is suggested as having significant advantages in studies of surfaces and diffusion processes in model systems. Several recommendations are made for research relevant to flyash formation and processes occurring on flyash surfaces.

  8. Psychological Foundations of Language

    Institute of Scientific and Technical Information of China (English)

    王敏

    2016-01-01

    语言在我们的进化史中只是新近才出现的一种现象,而导致这惊人发展的力量是什么尚不清楚。我们知道部分原因是特化于语言功能的脑结构的演变。语言行为,和所有的行为一样,要通过脑结构的作用,但因为语言极其微妙并涉及多个方面,所以要在大脑中有一个特别复杂的表征。我们会看到,我们语言能力的各个方面,不是纯粹的抽象物,而是在闹中有独立的,能具体说明的表征。另外,语言的心理学基础研究会扩展我们对语言理解,语言产生和语言习得的讨论。这篇文章首先对语言的心理学基础做了一个简单的介绍使我们对为什么要做这个研究有一个清晰的观点。然后讨论了大脑机制和语言。不同的语言技能涉及脑的不同部位,遭受脑受伤的个体常常只是在语言的某些方面表现缺陷。接着描述了语言进程的侧化,对脑裂病人和正常人的研究表明,对大部分人来说,脑的左半球控制语言,特别是句法过程和语言产生,而右半球则是语用方面和语言理解。最后,对关于大脑的智力,性别和遗传因素和语言的关系做了简要的描述。%The emergence of language occurred only recently in our evolutionary history,and the set of forces that led to this extraordinary de-velopment is not yet clear.We do know that part of the story concerns the evolution of brain mechanisms specialized for language functions.Lan-guage behavior,like all behavior,is mediated by brain structures,but because language is extremely subtle and multifaceted,it has a particularly complex representation in the brain.We will learn that various aspects of our language capacity are not mere abstractions but rather have separate and specifiable representations in the brain.Moreover,the study of the psychological foundations of language extends our discussion of language comprehension,production and

  9. Time-Series Analysis Technologies Applied to the Study of Carbon Element Distribution Along Casting Direction in Continuous-Casting Billet

    Science.gov (United States)

    Hou, Zibing; Cheng, Guoguang; Wu, Chengchuan; Chen, Chao

    2012-12-01

    The carbon element distributions along casting direction at centerline position, V-shaped segregation band, and columnar to equiaxed transformation (CET) position in continuous-casting billet have been first obtained by the original position statistic distribution analysis (OPA). Different location points at a certain position were formed along the opposite direction of casting direction with the lapse of the time, so the carbon mass fractions of different location points at a certain position can be considered as a time series. Based on the actual result, some typical time-series analysis technologies, such as the autoregressive integrated moving average (ARIMA) model, were used to analyze the characteristics of the three time series. It is found that there is some periodicity in the carbon element distribution at centerline position, and the correlation relationship between centerline position and CET position is closer than that between the centerline position and V-shaped segregation band at the same location point along the casting direction. Moreover, the element distribution along the casting direction is one of the solidifying results with the lapse of the time, so it is possible to investigate the characteristics of the system about the solidification process of continuous-casting billet by using these time series. Then it shows that there is a chaos feature in the system about the solidification process of studied continuous-casting billet on the basis of Hurst exponents and saturated correlative dimensions. Meanwhile, the formation process of carbon element distribution along casting direction can be described as fractional Brownian motion, and the upper and lower limits of the number of internal independent variables were determined in order to describe the formation process of carbon element distributions at different positions of the studied billet. Finally, the stochastic extent at V-shaped segregation band is found to be the largest, and it needs

  10. Improving Access to Foundational Energy Performance Data

    Energy Technology Data Exchange (ETDEWEB)

    Studer, D.; Livingood, W.; Torcellini, P.

    2014-08-01

    Access to foundational energy performance data is key to improving the efficiency of the built environment. However, stakeholders often lack access to what they perceive as credible energy performance data. Therefore, even if a stakeholder determines that a product would increase efficiency, they often have difficulty convincing their management to move forward. Even when credible data do exist, such data are not always sufficient to support detailed energy performance analyses, or the development of robust business cases. One reason for this is that the data parameters that are provided are generally based on the respective industry norms. Thus, for mature industries with extensive testing standards, the data made available are often quite detailed. But for emerging technologies, or for industries with less well-developed testing standards, available data are generally insufficient to support robust analysis. However, even for mature technologies, there is no guarantee that the data being supplied are the same data needed to accurately evaluate a product?s energy performance. To address these challenges, the U.S. Department of Energy funded development of a free, publically accessible Web-based portal, the Technology Performance Exchange(TM), to facilitate the transparent identification, storage, and sharing of foundational energy performance data. The Technology Performance Exchange identifies the intrinsic, technology-specific parameters necessary for a user to perform a credible energy analysis and includes a robust database to store these data. End users can leverage stored data to evaluate the site-specific performance of various technologies, support financial analyses with greater confidence, and make better informed procurement decisions.

  11. Polish Foundation for Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The Polish Foundation for Energy Efficiency (FEWE) was established in Poland at the end of 1990. FEWE, as an independent and non-profit organization, has the following objectives: to strive towards an energy efficient national economy, and to show the way and methods by use of which energy efficiency can be increased. The activity of the Foundation covers the entire territory of Poland through three regional centers: in Warsaw, Katowice and Cracow. FEWE employs well-known and experienced specialists within thermal and power engineering, civil engineering, economy and applied sciences. The organizer of the Foundation has been Battelle Memorial Institute - Pacific Northwest Laboratories from the USA.

  12. [Key technologies elements of clinical study of traditional Chinese medicine new drugs on children's dermatitis and eczema].

    Science.gov (United States)

    Zhong, Cheng-Liang; Zhang, Chun; Hu, Si-Yuan

    2013-06-01

    We assessed and graded the evidence of relevant systematic reviews and randomized controlled trials, combined with our clinical study practice to identify eleven key elements as a focus for the clinical study of traditional Chinese medicine (TCM) new drugs on children's dermatitis and eczema: the primary purpose and design of the study, the inclusion and exclusion criteria of the study, the treatment, the trail procedure,the effectiveness and safety evaluation, and quality control, etc, as well. In addition, seven recommendations for the design of clinical study of TCM new drugs on children's dermatitis and eczema were provided.

  13. Meshless analysis of an improved element-free Galerkin method for linear and nonlinear elliptic problems

    Science.gov (United States)

    Tang, Yao-Zong; Li, Xiao-Lin

    2017-03-01

    We first give a stabilized improved moving least squares (IMLS) approximation, which has better computational stability and precision than the IMLS approximation. Then, analysis of the improved element-free Galerkin method is provided theoretically for both linear and nonlinear elliptic boundary value problems. Finally, numerical examples are given to verify the theoretical analysis. Project supported by the National Natural Science Foundation of China (Grant No. 11471063), the Chongqing Research Program of Basic Research and Frontier Technology, China (Grant No. cstc2015jcyjBX0083), and the Educational Commission Foundation of Chongqing City, China (Grant No. KJ1600330).

  14. NATIONAL SCIENCE FOUNDATION. Preliminary Observations on Indirect Costs for Research

    Science.gov (United States)

    2017-05-24

    NATIONAL SCIENCE FOUNDATION Preliminary Observations on Indirect Costs for Research Statement of John Neumann, Director...on Science , Space, and Technology, House of Representatives For Release on Delivery Expected at 10:00 a.m. ET Wednesday, May 24th, 2017 GAO-17...testimony before the Subcommittee on Research and Technology and the Subcommittee on Oversight, Committee on Science , Space, and Technology, House of

  15. About The Rural Development Foundation

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>The Rural Development Foundation (RDF) ,founded in 1996,is an Indian nonprofit organization with the mission of providing quality education for underprivileged rural children. RDF founded and continues to operate five schools and one junior college in Andhra

  16. About The Rural Development Foundation

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>The Rural Development Foundation ( RDF) ,founded in 1996,is an Indian nonprofit organization with the mission of providin gquality education for underprivileged rural children. RDF founded and continues to operate five schools and one junior college in

  17. About The Rural Development Foundation

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>The Rural Development Foundation ( RDF) ,founded in 1996,is an Indian nonprofit organization with the mission of providing quality education for underprivileged rural children. RDF founded and continues to operate five schools

  18. About The Rural Development Foundation

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>The Rural Development Foundation ( RDF) ,founded in 1996,is an Indian nonprofit organization with the mission of providing quality education for underprivileged rural children. RDF founded and continues to operate five schools and one junior college in

  19. About The Rural Development Foundation

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>The Rural Development Foundation(RDF),founded in1996,is an Indian nonprofit organization with the mission of providingquality education for underprivileged rural children.RDF founded and continues to operate five schools and one junior college in

  20. Crohn's & Colitis Foundation of America

    Science.gov (United States)

    ... enabled to enjoy the full interactive experience. Crohn's & Colitis Foundation of America Find a Doctor Find a ... Local Chapters News Events Search: What are Crohn's & Colitis? What is Crohn's Disease What is Ulcerative Colitis ...

  1. Kaiser Family Foundation - Content Search

    Data.gov (United States)

    U.S. Department of Health & Human Services — Chartpacks, chartbooks, factsheets, reports, and slide presentations bring Kaiser Family Foundation information to life, and can be easily incorporated into your...

  2. Foundation for Film and Science

    Science.gov (United States)

    van der Veen, G.

    1976-01-01

    Provides a comprehensive discussion on the Stichting Film en Wetenschap, SFW (Foundation for Film and Science), in Utrecht. Various aspects of the use of audio-visual aids in university teaching are looked at in detail. (Editor/RK)

  3. Energy biotechnology at the National Science Foundation

    Energy Technology Data Exchange (ETDEWEB)

    Heineken, F.G. [National Science Foundation, Washington, DC (United States)

    1993-12-31

    A number of projects supported by the National Science Foundation (NSF) have possible applications in the area of Energy Biotechnology. These range from studies on the metabolic pathways for solvent and fuel production using microorganisms, both aerobic and anaerobic, to the conversion of biomass for the production of fuels and other chemicals and materials. Other projects focus in on new purification and separation technologies as well as new process monitoring techniques that could have an impact on solvent and fuel production. A brief review of these activities will be presented as well as a discussion of future needs and opportunities for research in Energy Biotechnology at NSF.

  4. Mastering Windows Server 2008 Networking Foundations

    CERN Document Server

    Minasi, Mark; Mueller, John Paul

    2011-01-01

    Find in-depth coverage of general networking concepts and basic instruction on Windows Server 2008 installation and management including active directory, DNS, Windows storage, and TCP/IP and IPv4 networking basics in Mastering Windows Server 2008 Networking Foundations. One of three new books by best-selling author Mark Minasi, this guide explains what servers do, how basic networking works (IP basics and DNS/WINS basics), and the fundamentals of the under-the-hood technologies that support staff must understand. Learn how to install Windows Server 2008 and build a simple network, security co

  5. Comparison of Calculation Models for Bucket Foundation in Sand

    DEFF Research Database (Denmark)

    Vaitkunaite, Evelina; Molina, Salvador Devant; Ibsen, Lars Bo

    The possibility of fast and rather precise preliminary offshore foundation design is desirable. The ultimate limit state of bucket foundation is investigated using three different geotechnical calculation tools: [Ibsen 2001] an analytical method, LimitState:GEO and Plaxis 3D. The study has focused...... on resultant bearing capacity of variously embedded foundation in sand. The 2D models, [Ibsen 2001] and LimitState:GEO can be used for the preliminary design because they are fast and result in a rather similar bearing capacity calculation compared with the finite element models of Plaxis 3D. The 2D models...... and their results are compared to the finite element model in Plaxis 3D in this article....

  6. Experimental Research of Engine Foundations

    Directory of Open Access Journals (Sweden)

    Violeta-Elena Chiţan

    2004-01-01

    Full Text Available This paper tries a compact presentation of experimental research of engine-foundations. The dynamic phenomena are so complex, that the vibrations cannot be estimated in the design stage. The design engineer of an engine foundation must foresee through a dynamic analysis of the vibrations, those measures that lead to the avoidance or limiting of the bad effects caused by the vibrations.

  7. Foundations of genetic algorithms 1991

    CERN Document Server

    1991-01-01

    Foundations of Genetic Algorithms 1991 (FOGA 1) discusses the theoretical foundations of genetic algorithms (GA) and classifier systems.This book compiles research papers on selection and convergence, coding and representation, problem hardness, deception, classifier system design, variation and recombination, parallelization, and population divergence. Other topics include the non-uniform Walsh-schema transform; spurious correlations and premature convergence in genetic algorithms; and variable default hierarchy separation in a classifier system. The grammar-based genetic algorithm; condition

  8. Physical Foundations of Cosmology

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, J M [University of Cambridge (United Kingdom)

    2006-02-07

    In 1952, Mme Yvonne Choquet-Bruhat published a major paper, Theoreme d'existence pour certains systemes d'equations aux derivees partielles non lineaires (Acta Math. 88 141-225), which laid the foundation for modern studies of the Cauchy problem in general relativity. The fiftieth anniversary of this event was celebrated with an eponymous Cargese Summer School in 2002. The proceedings of that summer school are summarized electronically (as audio, video, transparencies and lecture notes, where available) on a DVD archive included with this volume, and are also available on the internet. However the organizers decided that a separate volume describing the 'state of the art in mathematical general relativity' would be useful, and this book is the result. It includes some material not covered in the school and excludes some school material which has been covered adequately elsewhere. About one fifth of the book is devoted to a survey of Smoothness at Null Infinity and the Structure of Initial Data by Helmut Friedrich. This is a modern study of gravitational radiation, and the analysis of Einstein's equations. It is extremely helpful to survey all of this material, including some of the latest developments, using a consistent notation. This article is strongly recommended to anyone hoping to gain a foothold in this area. Lars Andersson has surveyed, in The Global Existence Problem in General Relativity, some results and conjectures about the global properties of 3+1-dimensional spacetimes with a compact Cauchy surface. Again it is very useful to have essentially all of the known results presented in a consistent notation. This material is not on the DVD. Yvonne Choquet-Bruhat has contributed a long research paper, Future Complete U(1) Symmetric Einsteinian Spacetimes, the Unpolarized Case. There is a non-linear stability theorem due to her and Vincent Moncrief in which spacetime is of the form M x R where M is a circle bundle over a compact

  9. Research on Treating Technology for Salinized Soft Foundation in Salt Lake Area in Qarhan%察尔汗盐湖地区盐渍化软土地基处理技术研究

    Institute of Scientific and Technical Information of China (English)

    刘军勇; 张留俊; 张发如

    2012-01-01

    Depending on Qarhan-Gomud Highway Project in Qinghai Province and combining with the hydrological geological conditions of the salinized soft foundation section along the Highway,different treatment schemes for such foundation are proposed and compared,and then gravel pile is finally decided to be used.The process of gravel pile for salinized soft foundation treatment in severely-excessively salinized soil area is proposed depending on the pilot section project so as to solve the difficulties during construction.%以青海省察尔汗—格尔木高速公路为依托工程,结合沿线盐渍化软土地基段工程水文地质情况,提出不同的地基处理方案并进行方案比选,最终确定采用砾石桩对盐渍化软土地基进行处理,通过试验段工程提出了适用于强-过盐渍土地区砾石桩处理盐渍化软土地基的施工工艺,解决了施工过程中遇到的难题。

  10. Hadoop Tutorials - Hadoop Foundations

    CERN Document Server

    CERN. Geneva; Lanza Garcia, Daniel

    2016-01-01

    The Hadoop ecosystem is the leading opensource platform for distributed storage and processing of "big data". The Hadoop platform is available at CERN as a central service provided by the IT department. This tutorial organized by the IT Hadoop service, aims to introduce the main concepts about Hadoop technology in a practical way and is targeted to those who would like to start using the service for distributed parallel data processing. The main topics that will be covered are: Hadoop architecture and available components How to perform distributed parallel processing in order to explore and create reports with SQL (with Apache Impala) on example data. Using a HUE - Hadoop web UI for presenting the results in user friendly way. How to format and/or structure data in order to make data processing more efficient - by using various data formats/containers and partitioning techniques (Avro, Parquet, HBase). ...

  11. Foundation Elements for Naval Low-Rise Buildings

    Science.gov (United States)

    2009-10-01

    message appeal, headlines, price information, quality claims, and Internet address inclusion) to compare advertising for B2B services to advertising for...values of the bulk shear block test. As can be seen in Figure 5 the values are similar or greater than the bulk composite properties. One other thing ...to gain an industry-wide perspective of the North American WPC industry, WPC producers were identified through Internet searches and contacts with

  12. Integrated Strip Foundation Systems for Small Residential Buildings

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    2010-01-01

    A prefabricated lightweight element was designed for a strip foundation that was used on site as the bases of two small residential buildings, in this case single-family houses; one was built with a double-brick exterior wall separated by mineral fiber insulation and the other was built with a wood...

  13. 1g Model Tests with Foundations in Sand

    DEFF Research Database (Denmark)

    Krabbenhøft, Sven; Damkilde, Lars; Clausen, Johan

    2010-01-01

    This paper presents the results of a series 1g model tests with both a circular and a strip foundation on dense sand. The test results have been compared with the results from finite element calculations based on a non linear Mohr-Coulomb yield criterion taking into account the dependence...

  14. Mobile 3D television: development of core technological elements and user-centered evaluation methods toward an optimized system

    Science.gov (United States)

    Gotchev, Atanas; Smolic, Aljoscha; Jumisko-Pyykkö, Satu; Strohmeier, Dominik; Bozdagi Akar, Gozde; Merkle, Philipp; Daskalov, Nikolai

    2009-02-01

    A European consortium of six partners has been developing core technological components of a mobile 3D television system over DVB-H channel. In this overview paper, we present our current results on developing optimal methods for stereo-video content creation, coding and transmission and emphasize their significance for the power-constrained mobile platform, equipped with auto-stereoscopic display. We address the user requirements by applying modern usercentered approaches taking into account different user groups and usage contexts in contrast to the laboratory assessment methods which, though standardized, offer limited applicability to real applications. To this end, we have been aiming at developing a methodological framework for the whole system development process. One of our goals has been to further develop the user-centered approach towards experienced quality of critical system components. In this paper, we classify different research methods and technological solutions analyzing their pros and constraints. Based on this analysis we present the user-centered methodological framework being used throughout the whole development process of the system and aimed at achieving the best performance and quality appealing to the end user.

  15. A behaviorological thanatology: Foundations and implications

    Science.gov (United States)

    Fraley, Lawrence E.

    1998-01-01

    Foundation principles supporting a behaviorological thanatology are reviewed, including concepts of life, person, death, value, right, ethic, and body/person distinctions. These natural science foundations are contrasted with traditional foundations, and their respective implications are speculatively explored. PMID:22478293

  16. Modelling of a gravity dam with mixed foundation by gravity method and linear finite element analysis; Modelisations d'un barrage-poids avec fondation mixte par la methode de gravite et l'analyse lineaire par elements finis

    Energy Technology Data Exchange (ETDEWEB)

    Auzolles, E. [Centre d' Expertise Hydrique du Quebec, Quebec, PQ (Canada); Degueldre, L.; Semler, C. [ROI Engineering Inc., Montreal, PQ (Canada); Leclerc, M. [Ecole Polytechnique de Montreal, Montreal, PQ (Canada)

    2009-07-01

    The gravity method is usually the only analysis tool used to determine the stability and stress of gravity dams. This paper reported on a study of a dam that was subjected to extreme and sudden floods. The entire structure was evaluated using the gravity method combined with a linear finite element analysis. The progressive cracking in the concrete during the hydrostatic loads was investigated using CADAM-3D, developed at Montreal's Ecole Polytechnique. The commercial code ANSYS was used to perform the finite element based stability analysis. The tight schedule for this type of analysis can be met using different pre- and post-processing wizards. It was concluded that the combination of these 2 methods provided better insight of the dam structural behaviour when subjected to a submersion flood, and improved the confidence level in terms of safety factors. 10 refs., 9 figs.

  17. Foundations of Forensic Meteoritics

    Science.gov (United States)

    Treiman, A. H.

    1992-07-01

    It may be useful to know if a meteorite was found at the site where it fell. For instance, the polymict ureilites North Haig and Nilpena were found 1100 km apart, yet are petrologically identical [1]. Could this distance represent transport from a single strewn field, or does it represent distinct fall sites? A meteorite may contain sufficient clues to suggest some characteristics of its fall site. If these inferences are inconsistent with the find site, one may infer that the meteorite has been transported. It will likely be impossible to determine the exact fall site of a transported meteorite. Data relevant to a meteorite's fall site may be intrinsic to the meteorite, or acquired at the site. For instance, an intrinsic property is terrestrial residence age (from abundances of cosmogenic radioisotopes and their decay products); a meteorite's terrestrial residence age must be the same or less than that of the surface on which it fell. After falling, a meteorite may acquire characteristic telltales of terrestrial geological, geochemical, and biological processes. These telltale clues may include products of chemical weathering, adhering geological materials, biological organisms living (or once living) on the meteorite, and biological materials adhering to (but never living on) the meteorite. The effects of chemical weathering, present in all but the freshest finds, range from slight rusting to extensive decomposition and veining The ages of weathering materials and veins, as with terrestrial residence ages above, must be less than the age of the fall surface. The mineralogy and chemistry, elemental and isotopic, of weathering materials will differ according to the mineralogy and composition of the meteorite, and the mineralogy, geochemistry, hydrology, and climate of the fall site. Weathering materials may also vary as climate changes and may vary among the microenvironments associated with a meteorite on the Earth's surface. Geological materials (rock, sediment

  18. Fermentation of food and feed: A technology for efficient utilization of macro and trace elements in monogastrics.

    Science.gov (United States)

    Humer, Elke; Schedle, Karl

    2016-09-01

    Mineral deficiencies, especially of iron, zinc, and calcium, respectively, negatively affect human health and may lead to conditions such as iron deficiency anemia, rickets, osteoporosis, and diseases of the immune system. Cereal grains and legumes are of global importance in nutrition of monogastrics (humans and the respective domestic animals) and provide high amounts of several minerals, e.g., iron, zinc, and calcium. Nevertheless, their bioavailability is low. Plants contain phytates, the salts of phytic acid, chemically known as inositol-hexakisphosphate, which interact with several minerals and proteins. However, phytate may be hydrolysed by phytase. This enzyme is naturally present in plants and also widely distributed in microorganisms. Several food processing methods have been reported to enhance phytate hydrolysis, due to the activation of endogenous phytase activity or via the enzyme produced by microbes. In recent years, fermentation for food and feed improvement and preservation, respectively, has gained increasing interest as a promising method to degrade phytate and enhance mineral utilization in monogastrics. Indeed, several in vitro as well as in vivo studies confirm a positive effect on the utilization of minerals, such as P, Ca, Fe and Zn, using sourdough fermentation for baking or fermentation of legumes, mainly soybeans. This review summarizes the current knowledge regarding the potential of fermentation to enhance macro and trace element bioavailability in monogastric species.

  19. Mathematical logic foundations for information science

    CERN Document Server

    Li, Wei

    2014-01-01

    Mathematical logic is a branch of mathematics that takes axiom systems and mathematical proofs as its objects of study. This book shows how it can also provide a foundation for the development of information science and technology. The first five chapters systematically present the core topics of classical mathematical logic, including the syntax and models of first-order languages, formal inference systems, computability and representability, and Gödel’s theorems. The last five chapters present extensions and developments of classical mathematical logic, particularly the concepts of version sequences of formal theories and their limits, the system of revision calculus, proschemes (formal descriptions of proof methods and strategies) and their properties, and the theory of inductive inference. All of these themes contribute to a formal theory of axiomatization and its application to the process of developing information technology and scientific theories. The book also describes the paradigm of three kinds...

  20. Foundation Networks and American Hegemony

    Directory of Open Access Journals (Sweden)

    Inderjeet Parmar

    2012-02-01

    Full Text Available The major American foundations constructed and sustained the rich texture of cooperative social, intellectual and political relations between key actors and institutions supportive of specific modes of thought that promoted US hegemony. Foundations also fostered and developed the attractive power-knowledge networks that not only radiated intellectual influence but also attracted some of the most creative minds. Finally, liberal internationalist foundations fostered globalism even when the American state was ‘isolationist’, and when US influence abroad unwelcome. Their significance in American hegemony building lay in their sustained, long-term cooperative relationship with the American state through which they helped build national, international and global institutions and networks. The latter process evidences the most significant impact of US foundations – the building of the domestic and international infrastructure for liberal internationalism which has transformed into a kind of “social neoliberalism”. Theoretical conclusions follow from these claims: the sustained and deep cooperation between the state and foundations suggests that we must revise our views of “how power works” in the United States and therefore influences its foreign relations. Therefore, the article shows that elite networks, consisting of state officials and private citizens are powerful means by which foreign policy shifts may be prepared, elite and mass opinion primed and mobilised, new consensus built, ‘old’ forces marginalised, and US hegemony constructed.

  1. [Conceptual foundations of creation of branch database of technology and intellectual property rights owned by scientific institutions, organizations, higher medical educational institutions and enterprises of healthcare sphere of Ukraine].

    Science.gov (United States)

    Horban', A Ie

    2013-09-01

    The question of implementation of the state policy in the field of technology transfer in the medical branch to implement the law of Ukraine of 02.10.2012 No 5407-VI "On Amendments to the law of Ukraine" "On state regulation of activity in the field of technology transfers", namely to ensure the formation of branch database on technology and intellectual property rights owned by scientific institutions, organizations, higher medical education institutions and enterprises of healthcare sphere of Ukraine and established by budget are considered. Analysis of international and domestic experience in the processing of information about intellectual property rights and systems implementation support transfer of new technologies are made. The main conceptual principles of creation of this branch database of technology transfer and branch technology transfer network are defined.

  2. Density functional theory: Foundations reviewed

    Energy Technology Data Exchange (ETDEWEB)

    Kryachko, Eugene S., E-mail: eugene.kryachko@ulg.ac.be [Bogolyubov Institute for Theoretical Physics, Kiev, 03680 (Ukraine); Ludeña, Eduardo V., E-mail: popluabe@yahoo.es [Centro de Química, Instituto Venezolano de Investigaciones Científicas, IVIC, Apartado 21827, Caracas 1020-A (Venezuela, Bolivarian Republic of); Prometheus Program, Senescyt (Ecuador); Grupo Ecuatoriano para el Estudio Experimental y Teórico de Nanosistemas, GETNano, USFQ, N104-E, Quito (Ecuador); Escuela Politécnica Superior del Litoral, ESPOL, Guayaquil (Ecuador)

    2014-11-10

    Guided by the above motto (quotation), we review a broad range of issues lying at the foundations of Density Functional Theory, DFT, a theory which is currently omnipresent in our everyday computational study of atoms and molecules, solids and nano-materials, and which lies at the heart of modern many-body computational technologies. The key goal is to demonstrate that there are definitely the ways to improve DFT. We start by considering DFT in the larger context provided by reduced density matrix theory (RDMT) and natural orbital functional theory (NOFT), and examine the implications that N-representability conditions on the second-order reduced density matrix (2-RDM) have not only on RDMT and NOFT but, also, by extension, on the functionals of DFT. This examination is timely in view of the fact that necessary and sufficient N-representability conditions on the 2-RDM have recently been attained. In the second place, we review some problems appearing in the original formulation of the first Hohenberg–Kohn theorem which is still a subject of some controversy. In this vein we recall Lieb’s comment on this proof and the extension to this proof given by Pino et al. (2009), and in this context examine the conditions that must be met in order that the one-to-one correspondence between ground-state densities and external potentials remains valid for finite subspaces (namely, the subspaces where all Kohn–Sham solutions are obtained in practical applications). We also consider the issue of whether the Kohn–Sham equations can be derived from basic principles or whether they are postulated. We examine this problem in relation to ab initio DFT. The possibility of postulating arbitrary Kohn–Sham-type equations, where the effective potential is by definition some arbitrary mixture of local and non-local terms, is discussed. We also deal with the issue of whether there exists a universal functional, or whether one should advocate instead the construction of problem

  3. Free Vibration Analysis of a Cross-Ply Laminated Composite Beam on Pasternak Foundation

    OpenAIRE

    R. A. Jafari-Talookolaei; Ahmadian, M. T.

    2007-01-01

    In this study, free vibration analysis of a cross-ply laminated composite beam (LCB) on Pasternak foundation was investigated. Natural frequencies of beam on Pasternak foundation are computed using finite element method (FEM) on the basis of Timoshenko beam theory. Effect of both shear deformation and rotary inertia are implemented in the modeling of stiffness and mass matrices. The model was designed in such a way that it can be used for single-stepped cross-section, stepped foundation and m...

  4. Terahertz metamaterials and systems based on rolled-up 3D elements: designs, technological approaches, and properties.

    Science.gov (United States)

    Prinz, Victor Ya; Naumova, Elena V; Golod, Sergey V; Seleznev, Vladimir A; Bocharov, Andrey A; Kubarev, Vitaliy V

    2017-03-03

    Electromagnetic metamaterials opened the way to extraordinary manipulation of radiation. Terahertz (THz) and optical metamaterials are usually fabricated by traditional planar-patterning approaches, while the majority of practical applications require metamaterials with 3D resonators. Making arrays of precise 3D micro- and nanoresonators is still a challenging problem. Here we present a versatile set of approaches to fabrication of metamaterials with 3D resonators rolled-up from strained films, demonstrate novel THz metamaterials/systems, and show giant polarization rotation by several chiral metamaterials/systems. The polarization spectra of chiral metamaterials on semiconductor substrates exhibit ultrasharp quasiperiodic peaks. Application of 3D printing allowed assembling more complex systems, including the bianisotropic system with optimal microhelices, which showed an extreme polarization azimuth rotation of 85° with drop by 150° at a frequency shift of 0.4%. We refer the quasiperiodic peaks in the polarization spectra of metamaterial systems to the interplay of different resonances, including peculiar chiral waveguide resonance. Formed metamaterials cannot be made by any other presently available technology. All steps of presented fabrication approaches are parallel, IC-compatible and allow mass fabrication with scaling of rolled-up resonators up to visible frequencies. We anticipate that the rolled-up meta-atoms will be ideal building blocks for future generations of commercial metamaterials, devices and systems on their basis.

  5. Nondestructive sensing technologies using micro-optical elements for applications in the NIR-MIR spectral regions

    Science.gov (United States)

    Otto, Thomas; Saupe, Ray; Bruch, Reinhard F.; Fritzsch, Uwe; Stock, Volker; Gessner, Thomas; Afanasyeva, Natalia I.

    2001-11-01

    The field of microtechnology is an important industrial and scientific resource for the 21st century. There is a great interest in spectroscopic sensors in the near and middle infrared (NIR-MIR) wavelength regions (1 - 2.5 micrometers ; 2.5 - 4.5 micrometers ; 4 - 6 micrometers ). The potential for cheap and small devices for nondestructive, remote sensing techniques at a molecular level has stimulated the design and development of more compact analyzer systems. Therefore we will try to build analyzers using micro optical components such as micromirrors and embossed micro gratings optimized for the above mentioned spectral ranges. Potentially, infrared sensors can be used for rapid nondestructive diagnostics of surfaces, liquids, gases, polymers and complex biological systems including proteins, blood, cells and cellular debris as well as body tissue. Furthermore, NIR-MIR microsensing spectroscopy will be utilized to monitor the chemical composition of petrochemical products like gasoline and diesel. In addition, miniature analyzers will be used for rapid measuring of food, in particular oil, starch and meat. In this paper we will present an overview of several new approaches for subsurface and surface sensing technologies based on the integration of optical micro devices, the most promising sensors for biomedical, environmental and industrial applications, data processing and evaluation algorithms for classification of the results. Both scientific and industrial applications will be discussed.

  6. Corporate Ownership by Industrial Foundations

    DEFF Research Database (Denmark)

    Thomsen, Steen

    1999-01-01

    Industrial foundations are self-governing non profit institutions that own business companies. This ownership structure is found in a fair number of Northern European companies, some of them successful world class competitors. Standard agency theory would predict foundation-owned companies...... to be relatively inefficient since they lack monitoring by residual claimants and access to equity finance from the stock market. Nevertheless, empirical research (Thomsen 1996) has found that Danish foundation-owned companies do no worse in terms of profitability and growth than companies with dispersed ownership...... or family ownership. The paper considers and tests alternative explanations of this paradox. Explanations based on tax incentives, alternative control mechanisms and product-market advantages are rejected, but some support is found for performance advantages related to family control and long term business...

  7. Scour Development around Bucket Foundations

    DEFF Research Database (Denmark)

    Stroescu, Ionut Emanuel; Frigaard, Peter Bak; Fejerskov, Morten

    2015-01-01

    The design without scour protection is a sensitive topic to most offshore developers, especially in the North Sea. However, newer research show that this concept is realistic if exists extended comprehension of the scour and backfill phenomena. The present paper shows comparative results for mono......The design without scour protection is a sensitive topic to most offshore developers, especially in the North Sea. However, newer research show that this concept is realistic if exists extended comprehension of the scour and backfill phenomena. The present paper shows comparative results...... for monopile and Bucket Foundation; using experimental analysis and real scour surveys around offshore installed Bucket Foundations. The main finding reflect that Bucket Foundation is a candidate for design without scour protection behaving like scour protected monopoles, in a variety of environmental...

  8. Macroelement modeling of shallow foundations

    CERN Document Server

    Chatzigogos, Charisis; Salençon, J

    2008-01-01

    The paper presents a new macroelement model for shallow foundations. The model is defined through a non-linear constitutive law written in terms of some generalized force and displacement parameters. The linear part of this constitutive law comes from the dynamic impedances of the foundation. The non-linear part comprises two mechanisms. One is due to the irreversible elastoplastic soil behavior: it is described with a bounding surface hypoplastic model, adapted for the description of the cyclic soil response. An original feature of the formulation is that the bounding surface is considered independently of the surface of ultimate loads of the system. The second mechanism is the detachment that can take place at the soil-footing interface (foundation uplift). It is totally reversible and non-dissipative and can thus be described by a phenomenological non-linear elastic model. The macroelement is qualitatively validated by application to soil-structure interaction analyses of simple real structures.

  9. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  10. Foundation Ownership, Reputation, and Labour

    DEFF Research Database (Denmark)

    Børsting, Christa Winther; Thomsen, Steen

    2017-01-01

    of profitability and growth, despite lacking governance mechanisms such as profit incentives or takeover threats. Given their non-profit ownership, they might be expected to behave more responsibly towards stakeholders, such as employees or customers (Hansmann, 1980), but so far there has been little empirical...... ratings. Secondary evidence on labour market behaviour is consistent with these findings. Using matched employer–employee data we show that foundation-owned companies are more stable employers, pay their employees better, and keep them for longer. Altogether, the evidence indicates that foundation...

  11. Physical foundations of technical acoustics

    CERN Document Server

    Malecki, I

    1969-01-01

    Physical Foundations of Technical Acoustics discusses theoretical foundations of acoustical engineering. It is not so much a technical compendium as a systematic statement of physical laws so conceived that technologists might find in it all the information they need to become acquainted with the physical meaning and mathematical expression of phenomena they encounter in their work. To facilitate the acquirement of notions, which lie beyond a layman's grasp, the plan of narration adopted consists in beginning with the simplest idealized cases and then gradually moving on to the truest possibl

  12. On the foundation of Mechanics

    CERN Document Server

    Alonso-Blanco, Ricardo J

    2014-01-01

    This note is an extended version of "A note on the foundations of Mechanics", arXiv: 1404.1321 [math-ph]. A presentation of its contents was given in a talk in memorial homage to the professor Juan B. Sancho Guimer\\'a. For this reason, it was written in spanish language. The matter of the note is a systematic foundation of the most classical part of Mechanics. The content by sections is: 0)Notions and basic results, 1)Conservative systems 2) Time. Time constraints, 3) Proper time. Relativistic forces, 4)Electromagnetic fields, 5) On the Hamilton-Noether Principle, 6) Schr\\"odinger equation.

  13. Professional Team Foundation Server 2010

    CERN Document Server

    Blankenship, Ed; Holliday, Grant; Keller, Brian

    2011-01-01

    Authoritative guide to TFS 2010 from a dream team of Microsoft insiders and MVPs!Microsoft Visual Studio Team Foundation Server (TFS) has evolved until it is now an essential tool for Microsoft?s Application Lifestyle Management suite of productivity tools, enabling collaboration within and among software development teams. By 2011, TFS will replace Microsoft?s leading source control system, VisualSourceSafe, resulting in an even greater demand for information about it. Professional Team Foundation Server 2010, written by an accomplished team of Microsoft insiders and Microsoft MVPs, provides

  14. Professional Team Foundation Server 2012

    CERN Document Server

    Blankenship, Ed; Holliday, Grant; Keller, Brian

    2012-01-01

    A comprehensive guide to using Microsoft Team Foundation Server 2012 Team Foundation Server has become the leading Microsoft productivity tool for software management, and this book covers what developers need to know to use it effectively. Fully revised for the new features of TFS 2012, it provides developers and software project managers with step-by-step instructions and even assists those who are studying for the TFS 2012 certification exam. You'll find a broad overview of TFS, thorough coverage of core functions, a look at extensibility options, and more, written by Microsoft ins

  15. 软土地层桥梁群桩基础桩土共同作用性状的非线性有限元分析%Nonlinear finite element analysis of pile-soil interaction of bridge pile group foundation in soft soil stratum

    Institute of Scientific and Technical Information of China (English)

    汪优; 刘建华; 王星华; 蔡君君

    2012-01-01

    A three dimensional nonlinear finite element model of pile group foundation of a high-speed railway bridge was built. Combined with the corresponding data obtained from field tests, the rules of pile axial force, pile side friction force, soil additional stress, pore water pressure distribution, excess pore water pressure dissipation and settlement of pile group foundation were analyzed. The calculation results show that the axial forces of corner piles are larger than the side piles which are larger than the center piles; and the axial forces of corner piles and side piles reduce greatly along the pile body; and the axial forces of center piles decrease slowly. Moreover, the regular pattern of pile side friction is that the pile side friction measurement of corner piles are larger than the side piles which are larger than the center piles generally; and the amount of relative displacement between pile and soil is bigger on the upper and less on the lower. That is to say, the amount of relative displacement between pile and soil on the upper of pile is larger than on the middle and lower of pile. Furthermore, the soil additional stress and excess pore water pressure generated by external loads mainly concentrate in soil under the pile cap within a certain range; and their attenuation gradients decrease along the depth gradually. With the increasing of the consolidation time, the settlement of pile group foundation arrives to be stabilized.%通过对某高速铁路特大桥群桩基础进行三维非线性有限元分析,并结合现场试验得出的规律进行相应的对比分析,研究了软土地层桥梁群桩基础桩身轴力、桩侧摩阻力、基底土体附加应力、孔隙水压力分布、超孔隙水压力消散和群桩基础荷载沉降规律.计算结果表明,基桩所承受的轴力,角桩>边桩>中心桩,角桩和边桩的轴力沿桩身减小的幅度较大,而中心桩的轴力沿桩身减小的幅度稍小;各基桩桩侧摩阻力

  16. Integrated System Health Management: Foundational Concepts, Approach, and Implementation.

    Science.gov (United States)

    Figueroa, Fernando; Schmalzel, John; Walker, Mark; Venkatesh, Meera; Kapadia, Ravi; Morris, Jon; Turowski, Mark; Smith, Harvey

    2009-01-01

    Implementation of integrated system health management (ISHM) capability is fundamentally linked to the management of data, information, and knowledge (DIaK) with the purposeful objective of determining the health of a system. It is akin to having a team of experts who are all individually and collectively observing and analyzing a complex system, and communicating effectively with each other in order to arrive to an accurate and reliable assessment of its health. We present concepts, procedures, and a specific approach as a foundation for implementing a credible ISHM capability. The capability stresses integration of DIaK from all elements of a system. The intent is also to make possible implementation of on-board ISHM capability, in contrast to a remote capability. The information presented is the result of many years of research, development, and maturation of technologies, and of prototype implementations in operational systems (rocket engine test facilities). The paper will address the following topics: 1. ISHM Model of a system 2. Detection of anomaly indicators. 3. Determination and confirmation of anomalies. 4. Diagnostic of causes and determination of effects. 5. Consistency checking cycle. 6. Management of health information 7. User Interfaces 8. Example implementation ISHM has been defined from many perspectives. We define it as a capability that might be achieved by various approaches. We describe a specific approach that has been matured throughout many years of development, and pilot implementations. ISHM is a capability that is achieved by integrating data, information, and knowledge (DIaK) that might be distributed throughout the system elements (which inherently implies capability to manage DIaK associated with distributed sub-systems). DIaK must be available to any element of a system at the right time and in accordance with a meaningful context. ISHM Functional Capability Level (FCL) is measured by how well a system performs the following

  17. 西宝高铁兴平段路基组合桩地基处理技术%Technology of subgrade's foundation treatment by combined piles in Xinping section of Xi'an-Baoji high speed railway

    Institute of Scientific and Technical Information of China (English)

    张华莹

    2015-01-01

    The Xingping section on Xi'an-Baoji high speed railway,laying on the second terrace of western Weihe plateau,faces the challenge of subgrade settlement,as the collapsible loess and saturated loess compose the upper layer,while sand and gravel soil form the lower layer. T he shallow groundwater depth and a maximum filling height of 8 m further pile on the treatment task. T he paper compares the available schemes and proposes the combined pile foundation as a preferable solution. It entails the designing concept and calculation approach,and on this basis,carries out settlement observation,dynamic detection and operation experiment to prove its validity. T he results show that the scheme effectively controls the settlement,creating an enabling environment for ballastless-track pavement. Compared with widely-applied single-pile foundation,this cost-effective solution helps enhance the bearing capacity of the foundation and brings settlement under control.%西安至宝鸡高铁兴平段路基位于关中平原西部渭河二级阶地上,地层上部为湿陷性黄土及饱和黄土,下部为砂层及圆砾土层,地下水位埋深较浅,路堤最大填方高度8 m,路基工后沉降难以控制。经综合方案比选,地基采用组合桩处理。本文详细地阐述了组合桩的设计计算方法,通过沉降观测、动态检测及运营实践证明,组合桩地基处理措施有效控制了路基工后沉降,满足无砟轨道铺设要求,使用效果良好。与传统单一桩型复合地基处理效果相比,组合桩具有节约投资、提高地基承载力、有效控制工后沉降等优势。

  18. Technological Difficulties and Countermeasures on Construction of Diaphragm Wall on Foundation of Xiangjiaba Hydropower Dam%向家坝水电站大坝坝基防渗墙施工技术难点及对策

    Institute of Scientific and Technical Information of China (English)

    孟德志

    2012-01-01

      向家坝混凝土大坝坝基分布有规模较大的IV、V类岩体,强度较低,遇水泥化,不满足坝基抗渗抗压的要求,设计采取防渗墙置换方式处理。根据向家坝坝基防渗墙在廊道内施工的特点,利用泥浆净化器解决成槽的弃浆清理问题,利用廊道顶设置起吊设备解决设备材料转运问题,在坝前布置临时通道输送混凝土确保浇筑的连续性,同时根据挠曲破碎带的地质特性,采取增设降水管井、高喷灌浆等措施解决挠曲破碎带的塌孔和孔底沉渣问题。质量检验表明防渗墙深度满足设计要求。%  The large scale rock mass of IV and V types distributing on the foundation of Xiangjiaba concrete dam fails to meet the requirements on anti-permeability and anti-pressure of the dam foundation due to its low intensity and argillization in water, therefore diaphragm wall substitute mode is designed to solve the problem. The construction of diaphragm wall on foundation of Xiangjiaba dam features being in the gallery, accordingly, the grooving discarded mud is schemed to be cleared up by mud purifier, while the transportation of equipments and materials are designed to be conducted through installing lifting appliance on the roof of gallery, with temporary access road arranged in front of the dam for concrete transporting on purpose of guaranteeing continuous pouring. Furthermore, the problems of sinking hole and sediment at hole bottom of the bending shuttered zone are solved through constructingprecipitationtubewellandhighsprinklingirrigationgroutinguponthegeologicalcharacteristicofthebendingshuttered zone. Inspection resultsshow thattheconstruction quality thereof meets the design requirements.

  19. Foundations and the Advancement of Postsecondary Education

    Science.gov (United States)

    Morris, Libby V.

    2017-01-01

    The author examined the websites of two large foundations, the Bill and Melinda Gates Foundation and the Lumina Foundation. Each has developed projects and networks, coupled with substantive grants, to improve postsecondary education. These and other foundations have deep and ongoing commitments, not just philosophical but resource-based, to…

  20. Vertical Dynamic Stiffness of Offshore Foundations

    DEFF Research Database (Denmark)

    Latini, Chiara; Cisternino, Michele; Zania, Varvara

    2016-01-01

    Nowadays, pile and suction caisson foundations are widely used to support offshore structures which are subjected to vertical dynamic loads. The dynamic soil-structure interaction of floating foundations (foundations embedded in a soil layer whose height is greater than the foundation length...

  1. Web 2.0.: Conceptual foundations and Marketing Issues

    NARCIS (Netherlands)

    Constantinides, Efthymios; Fountain, Stefan J.

    2008-01-01

    This paper identifies the technological and commercial foundations of the new category of online applications commonly described as Web 2.0 or Social Media. It examines the relevance of Web 2.0 for Marketing Strategy and for Direct Marketing in particular. The issue is not a clear-cut one: while

  2. Web 2.0.: Conceptual foundations and Marketing Issues

    NARCIS (Netherlands)

    Constantinides, Efthymios; Fountain, Stefan J.

    2008-01-01

    This paper identifies the technological and commercial foundations of the new category of online applications commonly described as Web 2.0 or Social Media. It examines the relevance of Web 2.0 for Marketing Strategy and for Direct Marketing in particular. The issue is not a clear-cut one: while sev

  3. Web 2.0: Conceptual foundations and marketing issues

    NARCIS (Netherlands)

    Constantinides, Efthymios; Fountain, Stefan J.

    2008-01-01

    This paper identifies the technological and commercial foundations of the new category of online applications commonly described as Web 2.0 or Social Media. It examines the relevance of Web 2.0 for Marketing Strategy and for Direct Marketing in particular. The issue is not a clear-cut one: while sev

  4. Towards a paradigmatic foundation of accounting practice

    DEFF Research Database (Denmark)

    Nørreklit, Hanne; Nørreklit, Lennart; Mitchell, Falconer

    2010-01-01

    Purpose - The purpose of this paper is to propose a framework (pragmatic constructivism) for a new paradigm for accounting practice. The paradigmatic base of practice is an important element in explaining, understanding, justifying and defending practice. Design/methodology/approach - The paper...... is designed to argue the case for the use of pragmatic constructivism as a basis for the development of a paradigmatic foundation of accounting practice. To achieve this, pragmatic constructivism is explained and its application to accounting is illustrated and contrasted with the traditional paradigm...... of realism. Findings - The analysis shows how the use of a less reductionist paradigm than realism can assist accountants both in the creation of a rationale and a defence for practice. Research limitations/implications - The analysis is exploratory in the sense that a new paradigmatic framework is outlined...

  5. The Foundation of Nea Paphos

    DEFF Research Database (Denmark)

    Bekker-Nielsen, Tønnes

    2000-01-01

    Traditionally it has been assumed that Nea Paphos was founded by king Nikokles, the last of the Kinyrad dynasty, around 320 BC. A critical reexamination of the evidence reveals this foundation date to be impossible; Nea Paphos was not founded in Nikokles' lifetime and probably not before 294 BC....

  6. Behavior Modeling -- Foundations and Applications

    DEFF Research Database (Denmark)

    This book constitutes revised selected papers from the six International Workshops on Behavior Modelling - Foundations and Applications, BM-FA, which took place annually between 2009 and 2014. The 9 papers presented in this volume were carefully reviewed and selected from a total of 58 papers...

  7. The Governance of Industrial Foundations

    DEFF Research Database (Denmark)

    Børsting, Christa; Kuhn, Johan; Poulsen, Thomas

    We study turnover among executives and directors in companies owned by Danish industrial foundations, which are held to be long term owners. Executives are members of the management board (direktionen), whereas directors a members of the supervisiory board (bestyrelsen). As expected, we find...

  8. Theoretical foundations for collaboration engineering

    NARCIS (Netherlands)

    Kolfschoten, G.L.

    2007-01-01

    Collaboration is often presented as the solution to numerous problems in business and society. However, collaboration is challenging, and collaboration support is not an off-the-shelf-product. This research offers theoretical foundations for Collaboration Engineering. Collaboration Engineering is an

  9. About The Rural Development Foundation

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>The Rural Development Foundation ( RDF) ,founded in 1996,is an Indian nonprofit organization with the mission of providingquality education for underprivileged rural children. RDF founded and continues to operate five schools and one junior college inAndhra Pradesh State,

  10. About The Rural Development Foundation

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>The Rural Development Foundation(RDF),founded in 1996,is an Indian nonprofit organization with the mission of providing quality education for underprivileged rural children.RDF founded and continues to operate five schools and one junior college in Andhra Pradesh State,taking a unique holistic approach to education through innovative programs and methodology.Rather than using the

  11. About The Rural Development Foundation

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>The Rural Development Foundation(RDF),founded in 1996,is an Indian nonprofit organization with the mission of providing quality education for underprivileged rural children.RDF founded and continues to operate five schools and one junior college in Andhra Pradesh State,taking a unique holistic approach to education through innovative programs and methodology.Rather than using the con-

  12. About The Rural Development Foundation

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>The Rural Development Foundation ( RDF) ,founded in 1996,is an Indian nonprofit organization with the mission of providing quality education for underprivileged rural children. RDF founded and continues to operate five schools and one junior college in Andhra Pradesh State,taking a unique holistic approach to education through innovative programs and methodology. Rather than

  13. About The Rural Development Foundation

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>The Rural Development Foundation(RDF),founded in 1996,is an Indian nonprofit organization with the mission of providing quality education for underprivileged rural children.RDF founded and continues to operate five schools and one junior college in Andhra

  14. About The Rural Development Foundation

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>The Rural Development Foundation (RDF) ,founded in 1996,is an Indian nonprofit organization with the mission of providingquality education for underprivileged rural children. RDF founded and continues to operate five schools and one junior college in AndhraPradesh State,taking a unique holistic approach to education through innovative programs and methodology. Rather than using the con-

  15. Cornelia de Lange Syndrome Foundation

    Science.gov (United States)

    ... org Outside Links Privacy & Terms Site Map The Cornelia de Lange Syndrome (CdLS) Foundation is a family support organization that exists to ensure early and accurate diagnosis of CdLS, promote ... a diagnosis of CdLS make informed decisions throughout their lives.

  16. Principles for Foundations of Education.

    Science.gov (United States)

    Britt, John

    The significance of the foundations of education approach to teaching is apparent in the ideas of John Henry Newman, Karl Jaspers, Jose Ortega y Gasset, and Mortimer Adler. Newman maintained that there is a circle of knowledge and once this unity is ignored the result is distortion in the learners and in the knowledge. To retain the whole, the…

  17. Team Foundation Server 2013 customization

    CERN Document Server

    Beeming, Gordon

    2014-01-01

    This book utilizes a tutorial based approach, focused on the practical customization of key features of the Team Foundation Server for collaborative enterprise software projects.This practical guide is intended for those who want to extend TFS. This book is for intermediate users who have an understanding of TFS, and basic coding skills will be required for the more complex customizations.

  18. Characteristic Behavior of Bucket Foundations

    DEFF Research Database (Denmark)

    Barari, Amin

    reduce the risks and costsrelated to offshore geotechnics. The thesis examines: 1.Characteristic Behavior of Bucket Foundations 2. Modeling of Water Flow through Porous Media The outcomes of each of the research contributions are summarized in four research articles, either directly or indirectly...

  19. Principles for Foundations of Education.

    Science.gov (United States)

    Britt, John

    The significance of the foundations of education approach to teaching is apparent in the ideas of John Henry Newman, Karl Jaspers, Jose Ortega y Gasset, and Mortimer Adler. Newman maintained that there is a circle of knowledge and once this unity is ignored the result is distortion in the learners and in the knowledge. To retain the whole, the…

  20. Sociolinguistic Foundations of Language Assessment.

    Science.gov (United States)

    Ornstein-Galicia, Jacob L.

    An answer to the question of what sociolinguistics has to offer to the art of language assessment is sought in exploration of the following topics: (1) a history of the development of sociolinguistics and an outline of the research on dialectology; (2) a review of basic sociolinguistic foundations and theories about language, society, domains of…

  1. Characteristic Behavior of Bucket Foundations

    DEFF Research Database (Denmark)

    Barari, Amin

    reduce the risks and costsrelated to offshore geotechnics. The thesis examines: 1.Characteristic Behavior of Bucket Foundations 2. Modeling of Water Flow through Porous Media The outcomes of each of the research contributions are summarized in four research articles, either directly or indirectly...

  2. FORD FOUNDATION PROJECTS. PROGRESS REPORT.

    Science.gov (United States)

    ROBINETT, RALPH F.; ROJAS, PAULINE M.

    THE FORD FOUNDATION PROJECTS INCLUDE--THE PREPARATION OF READING MATERIALS FOR NONENGLISH SPEAKING BILINGUAL PUPILS ENTERING THE FIRST GRADE, THE REVISION OF "FRIES AMERICAN ENGLISH SERIES" FOR NONENGLISH SPEAKING BILINGUAL PUPILS WHO CAN READ AND WRITE IN THEIR OWN VERNACULAR, THE PREPARATION OF AUDIOVISUAL MATERIAL FOR BILINGUAL…

  3. Corporate Ownership by Industrial Foundations

    DEFF Research Database (Denmark)

    Thomsen, Steen

    1999-01-01

    to be relatively inefficient since they lack monitoring by residual claimants and access to equity finance from the stock market. Nevertheless, empirical research (Thomsen 1996) has found that Danish foundation-owned companies do no worse in terms of profitability and growth than companies with dispersed ownership...

  4. Bucket Foundation Response Under Various Displacement Rates

    DEFF Research Database (Denmark)

    Vaitkunaite, Evelina; Nielsen, Benjaminn Nordahl; Ibsen, Lars Bo

    2016-01-01

    in a multi-bucket foundation system. The foundation model is at a scale of approximately 1:20 prototype foundation size. The tests are performed in a pressure tank with the foundation model installed in dense sand. Based on the data, the conclusion is that the bucket foundation design in a storm case should......The present testing program aims at showing the pore pressure response around a bucket foundation skirt as well as the load and displacement change due to ten different displacement rates. Research findings are useful for a numerical model calibration focusing on the design of the upwind foundation...

  5. Construction Technology of Single-ring Reinforced Concrtet Beam Support of Deep Foundation Pit%深基坑支护单道钢筋混凝土环梁支撑施工技术

    Institute of Scientific and Technical Information of China (English)

    熊乾

    2001-01-01

    深基坑环梁护壁支撑结构具有安全、经济和能提供宽阔的施工空间等特点。本文叙述天津运城大厦单道环梁支撑结构(基坑开挖深度12.25m)的施工实践。%The ring beam supporting and protecting structure o f deep foundation ditch has such merits as safety, saving and being able to provide enough construction space. In this article,the author introduces the practice of single ring beam supporting structure in tianjin Yuncheng Mansion.

  6. Construction technology of soft foundation reinforcement with plastic drainage plates for Minjiang River flood dike%闽江防洪堤软土地基塑料排水板加固施工技术

    Institute of Scientific and Technical Information of China (English)

    周婉真

    2015-01-01

    The author discussed the engineering geological conditions of Fuzhou section(1st-stage)of Minjiang River Flood Protection Project and the working principle of soft foundation treatment with plastic drainage plates. An introduction was made on the material of plastic drainage plate, the construction machine, technical program, monitoring method and construction quality control measures.%论述了闽江防洪工程福州段(一期)工程的工程地质情况及塑料排水板处理软土地基的工作原理。介绍了塑料排水板的材料、施工机械、工艺流程、监测方法和施工质量控制措施。

  7. Model Test on Concrete Cutting Directly by Shield and Pile Foundation Cutting Technology%盾构切削混凝土模拟试验和切削桩基施工技术

    Institute of Scientific and Technical Information of China (English)

    傅德明

    2014-01-01

    Underground obstacles,such as concrete piles,soil retaining structures,pipes and trenches and underground structures,are often encountered during shield boring in the construction of urban rail transit works.These pile founda-tions are normally underpinned,dismantled or manually cut.However,these conventional treatment methods have such disadvantages as high cost,long construction period and severe influence on the surrounding traffics.A400 mm model shield is used to cut blind concrete,glass fiber concrete and reinforced concrete,so as to study the feasibility of pile foundation cutting directly by shields,to make analysis on the modification of cutter heads and to obtain shield boring control parameters.Furthermore,the experience of the pile foundation cutting directly by shields in the construction of No.7 line and No.10 line of Shanghai rail transit works is described.Conclusions drawn are as follows:1 )It is feasi-ble to cut reinforced concrete directly by shields;2)Before shield launching,the cutter head should be modified,and a number of advance cutting tools and shell tools should be installed on the cutter head;3 )During the cutting of the pile foundations directly by shield,the shield should advance slowly (with less than 10 mm/min advance speed),and the earth pressure,thrust and cutter head torque set should be stable;4)During the cutting of the pile foundations directly by shield,lubricating and friction-reducing materials should be added into the excavation chamber so as to prevent the screw conveyor from being jammed by concrete blocks.After the shield passes the obstacle point,secondary grouting should be made to fill the annulus space behind the segment lining on basis of the monitoring results so as to control the settlement of the ground surface and the nearby buildings;5 )Cutting pile foundations directly by shield has advantages, including low cost,high safety and small environmental influence.%城市轨道交通盾构施工中经常遇到穿

  8. Theoretical Analysis on the Effect of Tunnel Excavation on Building strip foundation

    Science.gov (United States)

    Tian, Xiaoyan; Gu, Shuancheng; Huang, Rongbin

    2017-09-01

    In this paper, according to the characteristics of the ground settlement troughs curves, the influence of tunnel excavation on the effect of strip foundation was studied by inverse analysis firstly. The differential equation of the synergistic effect of the strip foundation and foundation under the tunnel excavation was established by using the equilibrium condition of the micro-element physical force. Then, the conceptual definite initial parameter method was used to solve the corresponding homogeneous equation. According to the plane section assumption, combined with the basic theory of material mechanics, considering the differential characteristic of hyperbolic trigonometric function, and using matlabmathmatica software, the theoretical calculation expression of displacement and internal force which is about the tunnel passes through the strip foundation was obtained. Finally, combined with engineering case analysis, changes of the relative position between the tunnel and the foundation, the influences of the main parameters on the foundation effect were studied. The results show that: The influence scope of the tunnel on the foundation is [-0.5 ~ 1.5] times of the foundation length, and when the tunnel center at the end of the foundation, there exists the maximum settlement. The parameters about the soil loss rate, the excavation section and the buried depth of the tunnel have great influence on the foundation effect. The change of foundation height has a great influence on its internal force.

  9. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  10. Study on Rock Bolt Reinforcement for a Gravity Dam Foundation

    Science.gov (United States)

    Chen, S. H.; Yang, Z. M.; Wang, W. M.; Shahrour, I.

    2012-01-01

    In this article, the rock bolt reinforcement mechanism is discussed, and the gravity method as well as the finite element method for the bolted rock is presented. These methods are applied to study the gravity dam foundation of the Xiaoxi Hydropower Project, which is influenced by the presence of a large fault with a cracked zone over 180 m wide. Rock bolt reinforcement was used to improve the stability of the dam foundation, and the reinforcement parameters were determined from a semi-empirical equation controlled by in situ test. The stability analysis was conducted using the above methods, and the improvement in terms of deformation and stress as well as stability of the dam foundation due to the reinforcement is assessed. Rock bolt reinforcement was completed successfully, and the dam started normal operations in January 2008.

  11. Foundation plate on the elastic half-space, deterministic and probabilistic approach

    Directory of Open Access Journals (Sweden)

    Tvrdá Katarína

    2017-01-01

    Full Text Available Interaction between the foundation plate and subgrade can be described by different mathematical - physical model. Elastic foundation can be modelled by different types of models, e.g. one-parametric model, two-parametric model and a comprehensive model - Boussinesque (elastic half-space had been used. The article deals with deterministic and probabilistic analysis of deflection of the foundation plate on the elastic half-space. Contact between the foundation plate and subsoil was modelled using contact elements node-node. At the end the obtained results are presented.

  12. Rare (Earth Elements [score

    Directory of Open Access Journals (Sweden)

    Camilo Méndez

    2014-12-01

    Full Text Available Rare (Earth Elements is a cycle of works for solo piano. The cycle was inspired by James Dillon’s Book of Elements (Vol. I-V. The complete cycle will consist of 14 pieces; one for each selected rare (earth element. The chosen elements are Neodymium, Erbium, Tellurium, Hafnium, Tantalum, Technetium, Indium, Dysprosium, Lanthanium, Cerium, Europium, Terbium, Yttrium and Darmstadtium. These elements were selected due to their special atomic properties that in many cases make them extremely valuable for the development of new technologies, and also because of their scarcity. To date, only 4 works have been completed Yttrium, Technetium, Indium and Tellurium.

  13. Uncovering the end uses of the rare earth elements

    Energy Technology Data Exchange (ETDEWEB)

    Du, Xiaoyue, E-mail: xiaoyue.du@empa.ch [Swiss Federal Laboratories for Materials Science and Technology (EMPA), Lerchenfeldstrasse 5, 9014 St. Gallen (Switzerland); Yale University, 195 Prospect Street, New Haven CT 06511 (United States); Graedel, T.E. [Yale University, 195 Prospect Street, New Haven CT 06511 (United States)

    2013-09-01

    The rare earth elements (REE) are a group of fifteen elements with unique properties that make them indispensable for a wide variety of emerging and conventional established technologies. However, quantitative knowledge of REE remains sparse, despite the current heightened interest in future availability of the resources. Mining is heavily concentrated in China, whose monopoly position and potential restriction of exports render primary supply vulnerable to short term disruption. We have drawn upon the published literature and unpublished materials in different languages to derive the first quantitative annual domestic production by end use of individual rare earth elements from 1995 to 2007. The information is illustrated in Sankey diagrams for the years 1995 and 2007. Other years are available in the supporting information. Comparing 1995 and 2007, the production of the rare earth elements in China, Japan, and the US changed dramatically in quantities and structure. The information can provide a solid foundation for industries, academic institutions and governments to make decisions and develop strategies. - Highlights: • We have derived the first quantitative end use information of the rare earths (REE). • The results are for individual REE from 1995 to 2007. • The end uses of REE in China, Japan, and the US changed dramatically in quantities and structure. • This information can provide solid foundation for decision and strategy making.

  14. Dish concentrators for solar thermal energy: Status and technology development

    Science.gov (United States)

    Jaffe, L. D.

    1982-01-01

    Point-focusing concentrators under consideration for solar thermal energy use are reviewed. These concentrators differ in such characteristics as optical configuration, optical materials, structure for support of the optical elements and of the receiver, mount, foundation, drive, controls and enclosure. Concentrator performance and cost are considered. Technology development is outlined, including wind loads and aerodynamics; precipitation, sand, and seismic considerations; and maintenance and cleaning.

  15. Conference Report: The Nour Foundation Georgetown University & Blackfriars Hall, Oxford University Symposium Series Technology, Neuroscience & the Nature of Being: Considerations of Meaning, Morality and Transcendence Part I: The Paradox of Neurotechnology 8 May 2009

    Directory of Open Access Journals (Sweden)

    Palchik Guillermo

    2009-07-01

    Full Text Available Abstract This reviews the first of a tripartite symposia series dealing with novel neuroscientific technologies, the nature of consciousness and being, and the questions that arise from such interactions. The event took place on May 8 2009, at Georgetown University, and brought together ten leading figures on fields ranging from Neuroscience and Robotics to Philosophy, that commented on their research and provided ethical, moral and practical insight and perspectives into how these technologies can shape the future of neuroscientific and human development, as well as denoting the potential abuses and the best way to proceed about them.

  16. Conference Report: The Nour Foundation Georgetown University & Blackfriars Hall, Oxford University Symposium Series Technology, Neuroscience & the Nature of Being: Considerations of Meaning, Morality and Transcendence Part I: The Paradox of Neurotechnology 8 May 2009

    Science.gov (United States)

    Palchik, Guillermo

    2009-01-01

    This reviews the first of a tripartite symposia series dealing with novel neuroscientific technologies, the nature of consciousness and being, and the questions that arise from such interactions. The event took place on May 8 2009, at Georgetown University, and brought together ten leading figures on fields ranging from Neuroscience and Robotics to Philosophy, that commented on their research and provided ethical, moral and practical insight and perspectives into how these technologies can shape the future of neuroscientific and human development, as well as denoting the potential abuses and the best way to proceed about them. PMID:19615065

  17. Cost-Effective Mass Production of Mono Bucket Foundations

    DEFF Research Database (Denmark)

    Nielsen, Søren A.; Ibsen, Lars Bo; Gres, Szymon

    foundations where mass production is needed. The project is planed for a duration of 3 years and is supported by Innovation Fund Denmark and has the following partners: DTU Wind Energy, FORCE Technology, LIC Engineering, AAU Civil and M-tech. The € 4 mill. project involves more than 25 researchers, Ph......Today, the basis for design and manufacturing of offshore foundations is inherited from oil and gas industry where the small repeatability in manufacturing is the case and the cost implications are different. The total opposite is the case when considering offshore Wind Turbine Generator...

  18. Reliability-Based Design of Wind Turbine Foundations

    DEFF Research Database (Denmark)

    Firouzianbandpey, Sarah

    With industrialization taking off in the 18th century, a dramatic increase of carbon dioxide emission began due to burning of fossil fuels. The heat-trapping nature of carbon dioxide causes global warming resulting in major concern about climate change as well as in an increased demand for more...... green energy technology in breaking the fossil fuel dependency. The costs of foundations for offshore wind turbines typically amount to 20–30% of the total wind turbine budget. Thus, an optimized design of these foundations will improve the cost effectiveness by matching a suitable target reliability...

  19. Generating a foundation for Concurrent Engineering. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, N.C.

    1997-03-01

    Both Concurrent Engineering and the Agile Enterprise require as a foundation the low cost, timely sharing of information. Described is a cost-effective way to generate this foundation from the product data International Standard 10303 (informally called STEP). Also described is a prototype implementation. AlliedSignal, Federal Manufacturing and Technologies (FM and T), was the first facility in the world to manufacture a mechanical part using the then draft international standard (DIS) ISO 10303 STEP. The Advanced Manufacturing Development System (AMDS) enabled this accomplishment.

  20. Java Foundation Classes in a Nutshell Desktop Quick Reference

    CERN Document Server

    Flanagan, David

    1999-01-01

    Java Foundation Classes in a Nutshell is an indispensable quick reference for Java programmers who are writing applications that use graphics or graphical user interfaces. The author of the bestsellingJava in a Nutshell has written fast-paced introductions to the Java APIs that comprise the Java Foundation Classes (JFC), such as the Swing GUI components and Java 2D, so that you can start using these exciting new technologies right away. This book also includes O'Reilly's classic-style, quick-reference material for all of the classes in the javax.swing and java.awt packages and their numerous

  1. Philosophical foundations of human rights

    CERN Document Server

    Liao, Matthew S

    2015-01-01

    What makes something a human right? What is the relationship between the moral foundations of human rights and human rights law? What are the difficulties of appealing to human rights? This book offers the first comprehensive survey of current thinking on the philosophical foundations of human rights. Divided into four parts, this book focusses firstly on the moral grounds of human rights, for example in our dignity, agency, interests or needs. 'Secondly, it looks at the implications that different moral perspectives on human rights bear for human rights law and politics. Thirdly, it discusses specific and topical human rights including freedom of expression and religion, security, health and more controversial rights such as a human right to subsistence. The final part discusses nuanced critical and reformative views on human rights from feminist, Kantian and relativist perspectives among others. The essays represent new and canonical research by leading scholars in the field. Each part is comprised of a set...

  2. Linear programming foundations and extensions

    CERN Document Server

    Vanderbei, Robert J

    2001-01-01

    Linear Programming: Foundations and Extensions is an introduction to the field of optimization. The book emphasizes constrained optimization, beginning with a substantial treatment of linear programming, and proceeding to convex analysis, network flows, integer programming, quadratic programming, and convex optimization. The book is carefully written. Specific examples and concrete algorithms precede more abstract topics. Topics are clearly developed with a large number of numerical examples worked out in detail. Moreover, Linear Programming: Foundations and Extensions underscores the purpose of optimization: to solve practical problems on a computer. Accordingly, the book is coordinated with free efficient C programs that implement the major algorithms studied: -The two-phase simplex method; -The primal-dual simplex method; -The path-following interior-point method; -The homogeneous self-dual methods. In addition, there are online JAVA applets that illustrate various pivot rules and variants of the simplex m...

  3. Information architecture. Volume 1, The foundations

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The Information Management Planning and Architecture Coordinating Team was formed to establish an information architecture framework to meet DOE`s current and future information needs. This department- wide activity was initiated in accordance with the DOE Information Management Strategic Plan; it also supports the Departmental Strategic Plan. It recognizes recent changes in emphasis as reflected in OMB Circular A-130 and the Information Resources Management Planning Process Improvement Team recommendations. Sections of this document provides the foundation for establishing DOE`s Information Architecture: Background, Business Case (reduced duplication of effort, increased integration of activities, improved operational capabilities), Baseline (technology baseline currently in place within DOE), Vision (guiding principles for future DOE Information Architecture), Standards Process, Policy and Process Integration (describes relations between information architecture and business processes), and Next Steps. Following each section is a scenario. A glossary of terms is provided.

  4. About The Rural Development Foundation

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>The Rural Development Foundation ( RDF) ,founded in 1996,is an Indian nonprofit organization with the mission of providing quality education for underprivileged rural children. RDF founded and continues to operate five schools and one junior college in Andhra Pradesh State,taking a unique holistic approach to education through innovative programs and methodology. Rather than using the conventional method of rote memorization,RDF focuses on cultivating critical thinking skills and encouraging students to

  5. About The Rural Development Foundation

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>The Rural Development Foundation(RDF),founded in 1996,is an Indian nonprofit organization with the mission of providing quality education for underprivileged rural children.RDF founded and continues to operate five schools and one junior college in Andhra Pradesh State,taking a unique holistic approach to education through innovative programs and methodology.Rather than using the conventional method of rote memorization,RDF focuses on cultivating critical thinking skills and encouraging students to understand and

  6. About The Rural Development Foundation

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>The Rural Development Foundation(RDF),founded in 1996,is an Indian nonprofit organization with the mission of providing quality education for underprivileged rural children.RDF founded and continues to operate five schools and one junior college in Andhra Pradesh State,taking a unique holistic approach to education through innovative programs and methodology.Rather than using the conventional method of rote memorization,RDF focuses on cultivating critical thinking skills and encouraging students to understand and

  7. About The Rural Development Foundation

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>The Rural Development Foundation ( RDF) ,founded in 1996,is an Indian nonprofit organization with the mission of providing quality education for underprivileged rural children. RDF founded and continues to operate five schools and one junior college in Andhra Pradesh State,taking a unique holistic approach to education through innovative programs and methodology. Rather than using the conventional method of rote memorization,RDF focuses on cultivating critical thinking skills and

  8. Mono pile foundation. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lyngesen, S.; Brendstrup, C.

    1997-02-01

    The use of mono piles as foundations for maritime structures has been developed during the last decades. The installation requirements within the offshore sector have resulted in equipment enabling driving of piles up to 3-4 m to large penetration depths. The availability of this equipment has made the use of large mono piles feasible as foundations for structures like wind turbines. The mono pile foundations consists of three parts; the bare pile, a conical transition and a boat landing. All parts are prefitted at the yard in order to minimise the installation work that has to be carried out offshore. The study of a mono pile foundations for a 1.5 MW wind turbine has been conducted for two locations, Horns Rev and Roedsand. Three different water depths: 5, 8 and 11 m have been investigated in the study. The on-site welding between pile and conical transition is performed by an automatic welding machine. Final testing and eventually repair of the weld are conducted at least 16 hours after welding. This is followed by final installation of J-tube, tie-in to subsea cables and installation of the impressed current system for corrosive protection of the mono pile. The total cost for procurement and installation of the mono pile using the welded connection is estimated. The price does not include procurement and installation of access platform and boat landing. These costs are estimated to 250.000 DKK. Depending on water depth the cost of the pile ranges from 2,2 to 2,7 million DKK. Procurement and fabrication of the pile are approx. 75% of the total costs. The remaining 25% are due to installation. The total costs are very sensitive to the unit price of pile steel. During the project it became obvious that ice load has a very large influence on the dimensions of the mono pile. (EG)

  9. NASA Space Technology Roadmaps and Priorities: Restoring NASA's Technological Edge and Paving the Way for a New Era in Space

    Science.gov (United States)

    2012-01-01

    Success in executing future NASA space missions will depend on advanced technology developments that should already be underway. It has been years since NASA has had a vigorous, broad-based program in advanced space technology development, and NASA's technology base is largely depleted. As noted in a recent National Research Council report on the U.S. civil space program: Future U.S. leadership in space requires a foundation of sustained technology advances that can enable the development of more capable, reliable, and lower-cost spacecraft and launch vehicles to achieve space program goals. A strong advanced technology development foundation is needed also to enhance technology readiness of new missions, mitigate their technological risks, improve the quality of cost estimates, and thereby contribute to better overall mission cost management. Yet financial support for this technology base has eroded over the years. The United States is now living on the innovation funded in the past and has an obligation to replenish this foundational element. NASA has developed a draft set of technology roadmaps to guide the development of space technologies under the leadership of the NASA Office of the Chief Technologist. The NRC appointed the Steering Committee for NASA Technology Roadmaps and six panels to evaluate the draft roadmaps, recommend improvements, and prioritize the technologies within each and among all of the technology areas as NASA finalizes the roadmaps. The steering committee is encouraged by the initiative NASA has taken through the Office of the Chief Technologist (OCT) to develop technology roadmaps and to seek input from the aerospace technical community with this study.

  10. 软弱地基下大型沉管隧道管段预制关键技术%Key Technology of Prefabrication of Tube Segment Used for Large-Scale Immersed Tube Tunnel with Soft Foundation

    Institute of Scientific and Technical Information of China (English)

    代敬辉

    2012-01-01

    Haihe River Tunnel in Tianjin belongs to immerged tube tunnel at high seismic intensity region, so the tube segments need to be prefabricated under effective design and reasonable construction process. Through researching into soft foundation treatment, targe-scale formwork design, concrete anti-cracking, structure durability, geometric size controlling and other aspects were researched, adopting the research method of "experiment first, then guiding construction" , the reasonable construction process and technical measures were summarized, which can ensure the prefabrication quality of the tube segment (its dimensions are 85 mx36. 6 mx9. 65 m, about 30 000 tons in weight) of large-scale immerged tube tunnel.%基于天津市海河隧道位于高震区软弱地基下,进行沉管隧道管段预制设计与施工.通过对坞底软基处理、大型模板设计、混凝土防裂、耐久性能、管段干弦值控制等方面进行研究,采取试验先行,后指导施工的研究方法,总结出合理的施工工艺及技术措施,保证了85 m×36.6 m×9.65 m,重约3万t大型沉管隧道管段制作质量.

  11. Negative Pressure Consolidation of Silt Inside Bucket Foundation

    Institute of Scientific and Technical Information of China (English)

    Ding Hongyan丁红岩; Liu Yonggang刘永刚; Zhang Puyang张浦阳

    2015-01-01

    A series of model experiments of bucket foundations concerning suction installation and negative pres-sure consolidation in saturated silt were carried out in a cube steel bin at Tianjin University. The experimental re-sults show that the silt inside the bucket has been strengthened by negative pressure, and the strengthening effect decreases with the increase of the distance from the bucket. A three-dimensional numerical model of the experi-ments was built by means of finite element software ABAQUS with fluid-solid coupling method. The results show that the bearing capacity of the silt inside the bucket foundation increases significantly at the former stage of nega-tive pressure consolidation, while the increasing trend slows down over time. The rotation centers of the bucket foundation and the inner soil region tend to be closer to each other based on the consolidation. The bearing capacity of the bucket foundation is improved effectively with the increase of soil strength. The effects of negative pressure consolidation on the bearing capacity of bucket foundation were also illustrated by an actual offshore wind power project case.

  12. Buckling Analysis of Bucket Foundations for Wind Turbines in Deep Water

    DEFF Research Database (Denmark)

    Madsen, Søren; Andersen, Lars; Ibsen, Lars Bo

    2011-01-01

    Using large suction caissons for offshore wind turbines is an upcoming technology also referred to as bucket foundations. The bucket foundation does not require heavy installation equipment, but since it is constructed as a thin steel shell structure, instability, in form of buckling, becomes...

  13. Effect of soil-foundation-structure interaction on the seismic response of wind turbines

    Directory of Open Access Journals (Sweden)

    Sam Austin

    2017-09-01

    Full Text Available Soil-foundation-structure interaction can affect the seismic response of wind turbines. This paper studies the effects of soil-foundation-structure interaction on the seismic response of 65 kW, 1 MW, and 2 MW horizontal-axis wind turbines with truncated cone steel towers. Four types of foundations with frequency-based design were analyzed, including spread foundation, mono pile, pile group with cap, and anchored spread foundation. Soil is modeled both implicitly (subgrade reaction modulus and explicitly. The finite element model developed using the ANSYS program was first validated using experimental data. Numerical models are then analyzed in both frequency and time domains using the Block Lanczos and generalized HHT-α formulations. Recommendations were given to simplify the soil-foundation-structure interaction analysis of wind turbines subjected to seismic loading.

  14. Safety-related Innovative Nuclear Reactor Technology Elements R and D (SINTER) Network and Global HTGR R and D Network (GHTRN). Strategic benefits of international networking

    Energy Technology Data Exchange (ETDEWEB)

    Von Lensa, W. [Institut fuer Sicherheitsforschung und Reaktortechnik ISR, Forschungszentrum Juelich, Juelich (Germany)

    1998-09-01

    Action on `Safety-related Innovative Nuclear Reactor Technology Elements - R and D - (SINTER) Network` both aim at the identification of priority items for sustainable innovations of nuclear technologies and work-shared European collaboration structures. Such an approach can also be realised for future R and D on HTGR-related R and D under the umbrella of the IAEA as already proposed by the `International Working Group on Gas-Cooled Reactors (IWGGCR)` in 1996 and illustrated in this paper for the construction of a `Global HTGR R and D Network (GHTRN)`. 3 refs.

  15. Foundation Field bus总线技术应用

    Institute of Scientific and Technical Information of China (English)

    曲涛

    2012-01-01

    This article is focus on the basis and development of Foundation Field bus,introduced the core technology and Trop- Architecture of Foundation Field bus. Made the compare into the advantages and disadvantages,at the same time discuss the merit of FF application in actual process industry and anticipated the future of FF.%本文着重介绍了Foundation Field bus总线技术的基础和发展,介绍了FF总线技术的核心技术和结构发展历程,并对FF总线技术的优缺点做了分析和比较,同时探讨了FF总线技术的实际意义和对其应用做了展望。

  16. A methodological proposal to contribute to the development of research skills in science education to start the design of a didactic unit built on foundations of scientific and technological literacy

    Directory of Open Access Journals (Sweden)

    Andrés Felipe Velásquez Mosquera

    2013-10-01

    Full Text Available This paper seeks to promote a discussion of the need to promote the training of investigative skills in students of natural sciences from a methodology structured from the design of the plan of course, including a didactic unit, based on scientific and technological literacy to. It is the result of several years of experience in teaching and research of the author in the field of the didactics of the sciences. 

  17. A methodological proposal to contribute to the development of research skills in science education to start the design of a didactic unit built on foundations of scientific and technological literacy

    OpenAIRE

    Andrés Felipe Velásquez Mosquera; Eduardo Augusto López

    2013-01-01

    This paper seeks to promote a discussion of the need to promote the training of investigative skills in students of natural sciences from a methodology structured from the design of the plan of course, including a didactic unit, based on scientific and technological literacy to. It is the result of several years of experience in teaching and research of the author in the field of the didactics of the sciences. 

  18. Run-up on Offshore Windturbine Foundations

    DEFF Research Database (Denmark)

    De Vos, Leen; Larsen, Brian Juul; Frigaard, Peter

    For the present report a testprogramme has been performed to determine the run-up on offshore windturbine foundations.......For the present report a testprogramme has been performed to determine the run-up on offshore windturbine foundations....

  19. Founding a Foundation: A Mini Case Study.

    Science.gov (United States)

    Lake, Dale B.

    1981-01-01

    Lists factors contributing to the need for increased fund raising in community colleges. Discusses advantages of a foundation as a means of obtaining private funds. Delineates specifics of establishing, organizing, and implementing the Kalamazoo Valley Community College Foundation. (DMM)

  20. Sudden Arrhythmia Death Syndromes (SADS) Foundation

    Science.gov (United States)

    ... K. Cleveland, Jr. Young Investigator Awards in Cardiac Channelopathy Research 5/4/2016 - SADS Foundation Announces Courts K. Cleveland, Jr. Young Investigator Awards in Cardiac Channelopathy Research 7/6/2015 - The SADS Foundation Supports ...

  1. Addressing issues in foundational ontology mediation

    CSIR Research Space (South Africa)

    Khan, ZC

    2013-09-01

    Full Text Available An approach in achieving semantic interoperability among heterogeneous systems is to offer infrastructure to assist with linking and integration using a foundational ontology. Due to the creation of multiple foundational ontologies, this also means...

  2. Birth of the Canadian Digestive Health Foundation

    OpenAIRE

    Beck, Ivan T.

    2004-01-01

    The Canadian Digestive Disease Foundation, renamed the Canadian Digestive Health Foundation -- Fondation canadienne pour la promotion de la santé digestive -- in December 2001, is the culmination of ongoing efforts by the Canadian Association of Gastroenterology to establish an independent charitable organization. In February 2001, it was officially endorsed as the Foundation for the Canadian Association of Gastroenterology. The initial efforts to establish this Foundation, led by Dr Richa...

  3. Practitioner Perspectives on Foundational Capabilities

    Science.gov (United States)

    Leider, Jonathon P.; Juliano, Chrissie; Castrucci, Brian C.; Beitsch, Leslie M.; Dilley, Abby; Nelson, Rachel; Kaiman, Sherry; Sprague, James B.

    2015-01-01

    Context: National efforts are underway to classify a minimum set of public health services that all jurisdictions throughout the United States should provide regardless of location. Such a set of basic programs would be supported by crosscutting services, known as the “foundational capabilities” (FCs). These FCs are assessment services, preparedness and disaster response, policy development, communications, community partnership, and organizational support activities. Objective: To ascertain familiarity with the term and concept of FCs and gather related perspectives from state and local public health practitioners. Design: In fall 2013, we interviewed 50 leaders from state and local health departments. We asked about familiarity with the term “foundational capabilities,” as well as the broader concept of FCs. We attempted to triangulate the utility of the FC concept by asking respondents about priority programs and services, about perceived unique contributions made by public health, and about prevalence and funding for the FCs. Setting: Telephone-based interviews. Participants: Fifty leaders of state and local health departments. Main Outcome Measures: Practitioner familiarity with and perspectives on the FCs, information about current funding streams for public health, and the likelihood of creating nationwide FCs that would be recognized and accepted by all jurisdictions. Results: Slightly more than half of the leaders interviewed said that they were familiar with the concept of FCs. In most cases, health departments had all of the capabilities to some degree, although operationalization varied. Few indicated that current funding levels were sufficient to support implementing a minimum level of FCs nationally. Conclusions: Respondents were not able to articulate the current or optimal levels of services for the various capabilities, nor the costs associated with them. Further research is needed to understand the role of FCs as part of the foundational

  4. Bearing capacity and mechanical behavior of CFG pile composite foundation

    Institute of Scientific and Technical Information of China (English)

    陈秋南; 赵明华; 周国华; 张主华

    2008-01-01

    CFG pile (i.e., pile constructed by granular materials of cement, fly-ash and gravel) composite foundation is applied in subsoil treatment widely and successfully. In order to have a further study of this kind of subsoil treatment technology, the influencing factors and calculation methods of the vertical bearing capacity of single CFG pile and the CFG pile composite foundation were discussed respectively. And based on the obtained solutions, effects by the cushion and measurements to reduce negative friction area were analyzed. Moreover, the developing law of settlement and bearing capacity eigenvalue controlled by the material strength with the increase of load were given for the CFG composite foundation. The in-situ static load test was tested for CFG pile. The results of test show that the maximum test load or half of the ultimate load is used from all the points of test, the average bearing capacity eigenvalue of single pile is 390 kN, and slightly greater than the design value of bearing capacity. The bearing capacity eigenvalues of composite foundation for 3 piles are greater than 300 kPa, and the mechanical properties of CFG pile composite foundation are almost identical in the case of the same load and cushion thickness. The pile-soil stress ratio and the load-sharing ratio can be adjusted through setting up cushion thickness.

  5. Electromagnetic foundations of electrical engineering

    CERN Document Server

    Faria, J A Brandao

    2008-01-01

    The applications of electromagnetic phenomena within electrical engineering have been evolving and progressing at a fast pace. In contrast, the underlying principles have been stable for a long time and are not expected to undergo any changes. It is these electromagnetic field fundamentals that are the subject of discussion in this book with an emphasis on basic principles, concepts and governing laws that apply across the electrical engineering discipline. Electromagnetic Foundations of Electrical Engineering begins with an explanation of Maxwell's equations, from which the fundament

  6. Epistemological Foundations of School Science

    Science.gov (United States)

    Izquierdo-Aymerich, Mercè; Adúriz-Bravo, Agustín

    Based on a synthesis of contributions from different authors, we present a theoretical framework that provides some foundations for school science, and we define some research problems. We start from what is already known about students' models and cognition in order to construct proposals of didactical intervention. The cognitive model of science, developed in the philosophy of science through studying scientists' activity, has allowed us to propose an analogous model for school science in which experimentation and language play the key roles. We emphasise the relative independence of school science and scientists' science.

  7. Foundations of wireless and electronics

    CERN Document Server

    Scroggie, M G

    1984-01-01

    Foundations of Wireless and Electronics, 10th Edition covers the cathode-ray and microwave tubes; modern pulse methods; f.m. detectors; basic processes of transmission; and reception, computers, and non-sinusoidal signal amplification. The book starts by giving a general overview of a complete electronic system, electricity and circuits, capacitance, and inductance. The text also discusses alternating currents (a.c.), including the frequency and phase of a.c.; the capacitance and inductance in a.c. circuits; and the capacitance and inductance in a series. Diodes, triode, transistor equivalent

  8. Letter to European Science Foundation

    Directory of Open Access Journals (Sweden)

    2006-06-01

    Full Text Available Département de Linguistique AppliquéeEt de Didactique des languesDirecteur : Claude Springerhttp://dladl.u-strasbg.fr Dr. Rüdiger KleinEUROCORES Programme CoordinatorEuropean Science Foundation1, quai Lezay MarnésiaBP 90015F-67080 Strasbourg Cedex Strasbourg, le 22 mai 2006 Dear colleague, The Editorial Board of the journal ALSIC (Apprentissage des langues et système d’information et de communication which comprises 45 people from universities in 9 different countries was astonished to note...

  9. Ensemble Methods Foundations and Algorithms

    CERN Document Server

    Zhou, Zhi-Hua

    2012-01-01

    An up-to-date, self-contained introduction to a state-of-the-art machine learning approach, Ensemble Methods: Foundations and Algorithms shows how these accurate methods are used in real-world tasks. It gives you the necessary groundwork to carry out further research in this evolving field. After presenting background and terminology, the book covers the main algorithms and theories, including Boosting, Bagging, Random Forest, averaging and voting schemes, the Stacking method, mixture of experts, and diversity measures. It also discusses multiclass extension, noise tolerance, error-ambiguity a

  10. Microsoft Windows Identity Foundation Cookbook

    CERN Document Server

    Chanda, Sandeep

    2012-01-01

    This book is written in a simple, easy to understand format, with lots of screenshots and step-by-step explanations.If you are a .NET developer looking forward to building access control in your applications using claims-based identity, then this is the best guide for you. This book is also an excellent choice for professionals and IT administrators trying to enable Single Sign-On across applications within the enterprise, and in the cloud spanning interoperable platforms. No previous knowledge on the subject is necessary, however a strong foundation in the C# programming language and .NET Fra

  11. Anomalous Transport Foundations and Applications

    CERN Document Server

    Klages, Rainer; Sokolov, Igor M

    2008-01-01

    This multi-author reference work provides a unique introduction to the currently emerging, highly interdisciplinary field of those transport processes that cannot be described by using standard methods of statistical mechanics. It comprehensively summarizes topics ranging from mathematical foundations of anomalous dynamics to the most recent experiments in this field. In so doing, this monograph extracts and emphasizes common principles and methods from many different disciplines while providing up-to-date coverage of this new field of research, considering such diverse applications as plasma

  12. Foundations of combinatorics with applications

    CERN Document Server

    Bender, Edward A

    2006-01-01

    This introduction to combinatorics, the foundation of the interaction between computer science and mathematics, is suitable for upper-level undergraduates and graduate students in engineering, science, and mathematics.The four-part treatment begins with a section on counting and listing that covers basic counting, functions, decision trees, and sieving methods. The following section addresses fundamental concepts in graph theory and a sampler of graph topics. The third part examines a variety of applications relevant to computer science and mathematics, including induction and recursion, sorti

  13. Quantum mechanics foundations and applications

    CERN Document Server

    Swanson, Donald Gary

    2006-01-01

    Progressing from the fundamentals of quantum mechanics (QM) to more complicated topics, Quantum Mechanics: Foundations and Applications provides advanced undergraduate and graduate students with a comprehensive examination of many applications that pertain to modern physics and engineering.Based on courses taught by the author, this textbook begins with an introductory chapter that reviews historical landmarks, discusses classical theory, and establishes a set of postulates. The next chapter demonstrates how to find the appropriate wave functions for a variety of physical systems in one dimens

  14. About The Rural Development Foundation

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>The Rural Development Foundation (RDF),founded in 1996,is an Indian nonprofit organization with the mission of providing quality education for underprivileged rural children. RDF founded and continues to operate five schools and one junior college in Andhra Pradesh State,taking a unique holistic approach to education through innovative programs and methodology. Rather than using the conventional method of rote memorization,RDF focuses on cultivating critical thinking skills and encouraging students to understand and apply concepts. RDF does this through special programs such as Social Awareness,Youth Empowerment,

  15. HTML5 rich media foundation

    CERN Document Server

    David, Matthew

    2010-01-01

    Learn about the new ways in which video and audio can be easily embedded into your HTML5 Web pages. Discover how you can create new Web media content and how JavaScript, CSS, and SVG can be integrated to create a compelling, rich media foundation for your work. HTML 5, is the first major update to the core language of the Web in over a decade The focus of this book is on innovations that most directly effect Web site design and multimedia integration The companion Web site features working demonstrations and tutorial media for hands-on pract

  16. Foundational issues in evolution education

    Science.gov (United States)

    Smith, Mike U.; Siegel, Harvey; McInerney, Joseph D.

    1995-01-01

    There is a great need for effective evolution education. This paper reviews some of the evidence that demonstrates that need and analyzes some of the foundational semantic, epistemological, and philosophical issues involved. This analysis is used to provide a functional understanding of the distinction between science and non-science. Special emphasis is placed the scientific meaning of the terms theory, hypothesis, fact, proof, evidence, and truth, focusing on the difference between religious belief and acceptance of a scientific theory. Science is viewed as theologically neutral and as not mutually exclusive from religion. Finally, a number of practical recommendations to the classroom biology teacher are presented.

  17. Compressor Foundation Analysis Tool(COFANTO)

    NARCIS (Netherlands)

    Eijk, A.; Lentzen, S.S.K; Zuada Coelho, B.E.; Galanti, F.M.B.

    2012-01-01

    Reciprocating compressors are generally supported on a heavy concrete foundation. In spite of the large inertia and stiffness of the foundation, problems can occur due to interaction between the mechanical installation and the foundation. Two types of problems may occur. In the first type, the inter

  18. Compressor Foundation Analysis Tool(COFANTO)

    NARCIS (Netherlands)

    Eijk, A.; Lentzen, S.S.K; Zuada Coelho, B.E.; Galanti, F.M.B.

    2012-01-01

    Reciprocating compressors are generally supported on a heavy concrete foundation. In spite of the large inertia and stiffness of the foundation, problems can occur due to interaction between the mechanical installation and the foundation. Two types of problems may occur. In the first type, the inter

  19. Bernard van Leer Foundation Annual Report 1996.

    Science.gov (United States)

    Bernard Van Leer Foundation, The Hague (Netherlands).

    This document provides an annual report and financial review for 1996 of the Bernard van Leer Foundation, a private institution created in 1949 for broad humanitarian purposes. Following a summary by the executive director of the Foundation, the report includes a description of the foundation and its grants. It then lists, by country, the major…

  20. Bernard van Leer Foundation. Annual Report 1997.

    Science.gov (United States)

    Bernard Van Leer Foundation, The Hague (Netherlands).

    This document provides an annual report and financial review of the Bernard van Leer Foundation, a private institution created in 1949 for broad humanitarian purposes. Following an introduction by the chairman of the Foundation's board of trustees, a report of the executive director details the first full-year of implementation of the Foundation's…