WorldWideScience

Sample records for technology facilities council

  1. 6th July 2010 - United Kingdom Science and Technology Facilities Council W. Whitehorn signing the guest book with Head of International relations F. Pauss, visiting the Computing Centre with Information Technology Department Head Deputy D. Foster, the LHC superconducting magnet test hall with Technology Department P. Strubin,the Centre Control Centre with Operation Group Leader M. Lamont and the CLIC/CTF3 facility with Project Leader J.-P. Delahaye.

    CERN Multimedia

    Teams : M. Brice, JC Gadmer

    2010-01-01

    6th July 2010 - United Kingdom Science and Technology Facilities Council W. Whitehorn signing the guest book with Head of International relations F. Pauss, visiting the Computing Centre with Information Technology Department Head Deputy D. Foster, the LHC superconducting magnet test hall with Technology Department P. Strubin,the Centre Control Centre with Operation Group Leader M. Lamont and the CLIC/CTF3 facility with Project Leader J.-P. Delahaye.

  2. Armament Technology Facility (ATF)

    Data.gov (United States)

    Federal Laboratory Consortium — The Armament Technology Facility is a 52,000 square foot, secure and environmentally-safe, integrated small arms and cannon caliber design and evaluation facility....

  3. 76 FR 60564 - President's Council of Advisors on Science and Technology; Notice of Meeting: Open Regional...

    Science.gov (United States)

    2011-09-29

    ... development. Facility and infrastructure sharing. Policies that could create a fertile innovation environment...; Notice of Meeting: Open Regional Meeting of the President's Council of Advisors on Science and Technology... schedule and summary agenda for an open regional meeting of the President's Council of Advisors on Science...

  4. Facility decontamination technology workshop

    International Nuclear Information System (INIS)

    1980-10-01

    Purpose of the meeting was to provide a record of experience at nuclear facilities, other than TMI-2, of events and incidents which have required decontamination and dose reduction activities, and to furnish GPU and others involved in the TMI-2 cleanup with the results of that decontamination and dose reduction technology. Separate abstracts were prepared for 24 of the 25 papers; the remaining paper had been previously abstracted

  5. Facility decontamination technology workshop

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-10-01

    Purpose of the meeting was to provide a record of experience at nuclear facilities, other than TMI-2, of events and incidents which have required decontamination and dose reduction activities, and to furnish GPU and others involved in the TMI-2 cleanup with the results of that decontamination and dose reduction technology. Separate abstracts were prepared for 24 of the 25 papers; the remaining paper had been previously abstracted. (DLC)

  6. Carbon Fiber Technology Facility (CFTF)

    Data.gov (United States)

    Federal Laboratory Consortium — Functionally within the MDF, ORNL operates DOE’s unique Carbon Fiber Technology Facility (CFTF)—a 42,000 ft2 innovative technology facility and works with leading...

  7. Technology Development Facility (TDF)

    International Nuclear Information System (INIS)

    Doggett, J.N.

    1982-01-01

    We have been studying small, driven, magnetic-mirror-based fusion reactors for the Technology Development Facility (TDF), that will test fusion reactor materials, components, and subsystems. Magnetic mirror systems are particularly interesting for this application because of their inherent steady-state operation, potentially high neutron wall loading, and relatively small size. Our design is a tandem mirror device first described by Fowler and Logan, based on the physics of the TMX experiments at Lawrence Livermore National Laboratory (LLNL). The device produces 20 MW of fusion power with a first-wall, uncollided 14-MeV neutron flux of 1.4 MW/m 2 on an area of approximately 8 m 2 , while consuming approximately 250 MW of electrical power. The work was done by a combined industrial-laboratory-university group

  8. Standoff Detection Technology Evaluation Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Standoff Detection Technology Evaluation facility is the only one of its kind in the country and allows researchers to release a known amount of material while...

  9. Underground Facilities, Technological Challenges

    CERN Document Server

    Spooner, N

    2010-01-01

    This report gives a summary overview of the status of international under- ground facilities, in particular as relevant to long-baseline neutrino physics and neutrino astrophysics. The emphasis is on the technical feasibility aspects of creating the large underground infrastructures that will be needed in the fu- ture to house the necessary detectors of 100 kton to 1000 kton scale. There is great potential in Europe to build such a facility, both from the technical point of view and because Europe has a large concentration of the necessary engi- neering and geophysics expertise. The new LAGUNA collaboration has made rapid progress in determining the feasibility for a European site for such a large detector. It is becoming clear in fact that several locations are technically fea- sible in Europe. Combining this with the possibility of a new neutrino beam from CERN suggests a great opportunity for Europe to become the leading centre of neutrino studies, combining both neutrino astrophysics and neutrino beam stu...

  10. 75 FR 29533 - National Advisory Council for Environmental Policy and Technology Notice of Charter Renewal

    Science.gov (United States)

    2010-05-26

    ... and Technology Notice of Charter Renewal AGENCY: Environmental Protection Agency (EPA). ACTION: Notice....2, the National Advisory Council for Environmental Policy and Technology (NACEPT) is a necessary...

  11. 75 FR 55616 - NASA Advisory Council; Information Technology Infrastructure Committee; Meeting

    Science.gov (United States)

    2010-09-13

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: (10-110)] NASA Advisory Council...-463, as amended, the National Aeronautics and Space Administration (NASA) announce a meeting for the Information Technology Infrastructure Committee of the NASA Advisory Council (NAC). DATES: Tuesday, September...

  12. Tandem mirror technology demonstration facility

    Energy Technology Data Exchange (ETDEWEB)

    1983-10-01

    This report describes a facility for generating engineering data on the nuclear technologies needed to build an engineering test reactor (ETR). The facility, based on a tandem mirror operating in the Kelley mode, could be used to produce a high neutron flux (1.4 MW/M/sup 2/) on an 8-m/sup 2/ test area for testing fusion blankets. Runs of more than 100 h, with an average availability of 30%, would produce a fluence of 5 mW/yr/m/sup 2/ and give the necessary experience for successful operation of an ETR.

  13. Tandem mirror technology demonstration facility

    International Nuclear Information System (INIS)

    1983-10-01

    This report describes a facility for generating engineering data on the nuclear technologies needed to build an engineering test reactor (ETR). The facility, based on a tandem mirror operating in the Kelley mode, could be used to produce a high neutron flux (1.4 MW/M 2 ) on an 8-m 2 test area for testing fusion blankets. Runs of more than 100 h, with an average availability of 30%, would produce a fluence of 5 mW/yr/m 2 and give the necessary experience for successful operation of an ETR

  14. Science and Engineering Research Council Central Laser Facility

    International Nuclear Information System (INIS)

    1981-03-01

    This report covers the work done at, or in association with, the Central Laser Facility during the year April 1980 to March 1981. In the first chapter the major reconstruction and upgrade of the glass laser, which has been undertaken in order to increase the versatility of the facility, is described. The work of the six groups of the Glass Laser Scientific Progamme and Scheduling Committee is described in further chapters entitled; glass laser development, laser plasma interactions, transport and particle emission studies, ablative acceleration and compression studies, spectroscopy and XUV lasers, and theory and computation. Publications based on the work of the facility which have either appeared or been accepted for publication during the year are listed. (U.K.)

  15. Shielding of Medical Radiation Facilities - National Council on Radiation Protection and Measurements Reports No. 147 and No. 151

    International Nuclear Information System (INIS)

    KASE, K.R.

    2008-01-01

    The National Council on Radiation Protection and Measurements of the United States (NCRP) has issued two reports in the past 18 months that provide methods and data for designing shielding for diagnostic radiological imaging and radiation therapy facilities. These reports update previous publications on this subject with revised methods that take into account new technologies, results from measurements and new data that have been published in the last 30 years. This paper gives a brief summary of the contents of these reports, the methods recommended for determining the shielding required and the data provided to aid in the calculations

  16. 77 FR 10736 - President's Council of Advisors on Science and Technology (PCAST)

    Science.gov (United States)

    2012-02-23

    ... an overview of the Department of Agriculture's science, technology, and innovation activities, and... DEPARTMENT OF ENERGY President's Council of Advisors on Science and Technology (PCAST) AGENCY... Science and Technology (PCAST), and describes the functions of the Council. Notice of this meeting is...

  17. 76 FR 73632 - National Advisory Council for Environmental Policy and Technology

    Science.gov (United States)

    2011-11-29

    ... and Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Request for Nominations to the National Advisory Council for Environmental Policy and Technology (NACEPT). SUMMARY: The U.S. Environmental... appointment to the National Advisory Council for Environmental Policy and Technology (NACEPT). Vacancies are...

  18. 77 FR 6825 - NASA Advisory Council; Information Technology Infrastructure Committee; Meeting.

    Science.gov (United States)

    2012-02-09

    ...; Information Technology Infrastructure Committee; Meeting. AGENCY: National Aeronautics and Space... Information Technology Infrastructure Committee of the NASA Advisory Council. DATES: Wednesday, March 7, 2012... CONTACT: Ms. Karen Harper, Executive Secretary for the Information Technology Infrastructure Committee...

  19. 78 FR 72718 - NASA Advisory Council; Information Technology Infrastructure Committee; Meeting

    Science.gov (United States)

    2013-12-03

    ...; Information Technology Infrastructure Committee; Meeting AGENCY: National Aeronautics and Space Administration... Information Technology Infrastructure Committee (ITIC) of the NASA Advisory Council (NAC). DATES: Tuesday... Chief Information Officer Space Launch System Kennedy Space Center Operations and Technology Issues...

  20. 78 FR 69462 - National Nanotechnology Initiative Strategic Plan; National Science and Technology Council...

    Science.gov (United States)

    2013-11-19

    ... OFFICE OF SCIENCE AND TECHNOLOGY POLICY OFFICE National Nanotechnology Initiative Strategic Plan; National Science and Technology Council; National Nanotechnology Coordination Office AGENCY: Executive... Science, Engineering, and Technology Subcommittee requests public comments on the draft 2014 National...

  1. 76 FR 1431 - National Advisory Council for Environmental Policy and Technology

    Science.gov (United States)

    2011-01-10

    ... and Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Meeting. SUMMARY... National Advisory Council for Environmental Policy and Technology (NACEPT). NACEPT provides advice to the EPA Administrator on a broad range of environmental policy, technology, and management issues. NACEPT...

  2. 75 FR 52941 - National Advisory Council for Environmental Policy and Technology

    Science.gov (United States)

    2010-08-30

    ... and Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of meeting. SUMMARY... National Advisory Council for Environmental Policy and Technology (NACEPT). NACEPT provides advice to the EPA Administrator on a broad range of environmental policy, technology, and management issues. NACEPT...

  3. 76 FR 24481 - National Advisory Council for Environmental Policy and Technology

    Science.gov (United States)

    2011-05-02

    ... and Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of meeting. SUMMARY... National Advisory Council for Environmental Policy and Technology (NACEPT). NACEPT provides advice to the EPA Administrator on a broad range of environmental policy, technology, and management issues. NACEPT...

  4. 76 FR 68183 - National Advisory Council for Environmental Policy and Technology

    Science.gov (United States)

    2011-11-03

    ... and Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of meeting. SUMMARY... National Advisory Council for Environmental Policy and Technology (NACEPT). NACEPT provides advice to the EPA Administrator on a broad range of environmental policy, technology, and management issues. NACEPT...

  5. 75 FR 38810 - National Advisory Council for Environmental Policy and Technology

    Science.gov (United States)

    2010-07-06

    ... and Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of meeting. SUMMARY... of the National Advisory Council for Environmental Policy and Technology (NACEPT). NACEPT provides advice to the EPA Administrator on a broad range of environmental policy, technology, and management...

  6. 75 FR 25240 - National Advisory Council for Environmental Policy and Technology

    Science.gov (United States)

    2010-05-07

    ... ENVIRONMENTAL PROTECTION AGENCY National Advisory Council for Environmental Policy and Technology... for Environmental Policy and Technology (NACEPT). NACEPT provides advice to the EPA Administrator on a broad range of environmental policy, technology, and management issues. NACEPT is a committee of...

  7. 76 FR 37112 - National Advisory Council for Environmental Policy and Technology

    Science.gov (United States)

    2011-06-24

    ... and Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of meeting. SUMMARY... of the National Advisory Council for Environmental Policy and Technology (NACEPT). NACEPT provides advice to the EPA Administrator on a broad range of environmental policy, technology, and management...

  8. DECONTAMINATION TECHNOLOGIES FOR FACILITY REUSE

    International Nuclear Information System (INIS)

    Bossart, Steven J.; Blair, Danielle M.

    2003-01-01

    As nuclear research and production facilities across the U.S. Department of Energy (DOE) nuclear weapons complex are slated for deactivation and decommissioning (D and D), there is a need to decontaminate some facilities for reuse for another mission or continued use for the same mission. Improved technologies available in the commercial sector and tested by the DOE can help solve the DOE's decontamination problems. Decontamination technologies include mechanical methods, such as shaving, scabbling, and blasting; application of chemicals; biological methods; and electrochemical techniques. Materials to be decontaminated are primarily concrete or metal. Concrete materials include walls, floors, ceilings, bio-shields, and fuel pools. Metallic materials include structural steel, valves, pipes, gloveboxes, reactors, and other equipment. Porous materials such as concrete can be contaminated throughout their structure, although contamination in concrete normally resides in the top quarter-inch below the surface. Metals are normally only contaminated on the surface. Contamination includes a variety of alpha, beta, and gamma-emitting radionuclides and can sometimes include heavy metals and organic contamination regulated by the Resource Conservation and Recovery Act (RCRA). This paper describes several advanced mechanical, chemical, and other methods to decontaminate structures, equipment, and materials

  9. 77 FR 64561 - NASA Advisory Council; Technology and Innovation Committee; Meeting

    Science.gov (United States)

    2012-10-22

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 12-083] NASA Advisory Council; Technology...: Notice of meeting. SUMMARY: The National Aeronautics and Space Administration (NASA) announces a meeting of the Technology and Innovation Committee of the NASA Advisory Council (NAC). The meeting will be...

  10. 75 FR 4110 - NASA Advisory Council; Technology and Innovation Committee; Meeting.

    Science.gov (United States)

    2010-01-26

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10-010)] NASA Advisory Council; Technology... amended, the National Aeronautics and Space Administration (NASA) announce a meeting of the newly formed Technology and Innovation Committee of the NASA Advisory Council (NAC). This will be the first meeting of...

  11. 78 FR 42553 - NASA Advisory Council; Information Technology Infrastructure Committee; Meeting

    Science.gov (United States)

    2013-07-16

    ...; Information Technology Infrastructure Committee; Meeting AGENCY: National Aeronautics and Space Administration... Information Technology Infrastructure Committee (ITIC) of the NASA Advisory Council (NAC). This Committee..., DC 20546. FOR FURTHER INFORMATION CONTACT: Ms. Deborah Diaz, ITIC Executive Secretariat, NASA...

  12. 75 FR 24773 - Research and Innovative Technology Administration Advisory Council on Transportation Statistics...

    Science.gov (United States)

    2010-05-05

    ... DEPARTMENT OF TRANSPORTATION Bureau of Transportation Statistics Research and Innovative Technology Administration Advisory Council on Transportation Statistics; Notice of Meeting AGENCY: Research... Transportation, Research and Innovative Technology Administration, Bureau of Transportation Statistics, Attention...

  13. 75 FR 57520 - NASA Advisory Council; Planetary Science Subcommittee; Supporting Research and Technology Working...

    Science.gov (United States)

    2010-09-21

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10-112)] NASA Advisory Council; Planetary Science Subcommittee; Supporting Research and Technology Working Group; Meeting AGENCY: National... announces a meeting of the Supporting Research and Technology Working Group of the Planetary Science...

  14. Regulatory measures of BARC Safety Council to control radiation exposure in BARC Facilities

    International Nuclear Information System (INIS)

    Rajdeep; Jolly, V.M.; Jayarajan, K.

    2018-01-01

    Bhabha Atomic Research Centre is involved in multidisciplinary research and developmental activities, related to peaceful use of nuclear energy including societal benefits. BARC facilities at different parts of India include nuclear fuel fabrication facilities, research reactors, nuclear recycle facilities and various Physics, Chemistry and Biological laboratories. BARC Safety Council (BSC) is the regulatory body for BARC facilities and takes regulatory measures for radiation protection. BSC has many safety committees for radiation protection including Operating Plants Safety Review Committee (OPSRC), Committee to Review Applications for Authorization of Safe Disposal of Radioactive Wastes (CRAASDRW) and Design Safety Review Committees (DSRC) in 2 nd tier and Unit Level Safety Committees (ULSCs) in 3 rd tier under OPSRC

  15. Regulatory role and approach of BARC Safety Council in safety and occupational health in BARC facilities

    International Nuclear Information System (INIS)

    Rajdeep; Jayarajan, K.; Taly, Y.K.

    2016-01-01

    Bhabha Atomic Research Centre is involved in multidisciplinary research and developmental activities, related to peaceful use of nuclear energy and its societal benefits. In order to achieve high level of performance of these facilities, the best efforts are made to maintain good health of the plant personnel and good working conditions. BARC Safety Council (BSC), which is the regulatory body for BARC facilities, regulates radiation safety, industrial safety and surveillance of occupational health, by implementing various rules and guidelines in BARC facilities. BARC Safety framework consists of various committees in a 3-tier system. The first tier is BSC, which is the apex body authorized for issuing directives, permissions, consents and authorizations. It is having responsibility of ensuring protection and safety of public, environment, personnel and facilities of BARC through enforcement of radiation protection and industrial safety programmes. Besides the 18 committees in 2"n"d tier, there are 6 other expert committees which assist in functioning of BSC. (author)

  16. Empowering Facilities Teams through Technology

    Science.gov (United States)

    Cormier, Scott

    2013-01-01

    Facilities departments at colleges and universities are facing the same challenge: how not to do just the most projects, but also the right projects with the limited funds they are given. In order to make the best decisions, they need more control over the capital planning process, which requires accurate, current facility condition data. Each…

  17. Spanish Minister of Science and Technology visits the LHC magnet test facility

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    H.E. Mr Josep Piqué i Camps, Minister of Science and Technology, Spain, visited CERN in November. Here Felix Rodriguez Mateos (right) explains aspects of the test facility to the Minister (left). Between them are M. Aguilar Benitez, Spanish delegate to CERN Council (left), and Francisco Giménez-Reyna, Spanish delegate to the CERN Finance Committee.

  18. 76 FR 64386 - NASA Advisory Council; Information Technology Infrastructure Committee; Meeting

    Science.gov (United States)

    2011-10-18

    ..., Executive Secretary for the Information Technology Infrastructure Committee, National Aeronautics and Space... they are attending the NASA Advisory Council, Information Technology Infrastructure Committee meeting in Building 34, Room W305. All U.S. citizens desiring to attend the Information Technology...

  19. 77 FR 8859 - National Advisory Council for Environmental Policy and Technology

    Science.gov (United States)

    2012-02-15

    ... and Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Cancellation and Rescheduling of National Advisory Council for Environmental Policy and Technology (NACEPT) Committee Meeting. SUMMARY: EPA... Environmental Policy and Technology (NACEPT) Meeting to be held at the EPA Potomac Yard Conference Center, One...

  20. 77 FR 39705 - National Advisory Council for Environmental Policy and Technology

    Science.gov (United States)

    2012-07-05

    ... and Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Advisory Committee... meeting of the National Advisory Council for Environmental Policy and Technology (NACEPT). NACEPT provides advice to the EPA Administrator on a broad range of environmental policy, technology, and management...

  1. 77 FR 1931 - National Advisory Council for Environmental Policy and Technology

    Science.gov (United States)

    2012-01-12

    ... and Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Advisory Committee... meeting of the National Advisory Council for Environmental Policy and Technology (NACEPT). NACEPT provides advice to the EPA Administrator on a broad range of environmental policy, technology, and management...

  2. 77 FR 2719 - National Advisory Council for Environmental Policy and Technology; Meeting

    Science.gov (United States)

    2012-01-19

    ... and Technology; Meeting AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Advisory... a public meeting of the National Advisory Council for Environmental Policy and Technology (NACEPT). NACEPT provides advice to the EPA Administrator on a broad range of environmental policy, technology...

  3. 77 FR 39705 - National Advisory Council for Environmental Policy and Technology; Charter Renewal

    Science.gov (United States)

    2012-07-05

    ... and Technology; Charter Renewal AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. Notice... Advisory Council for Environmental Policy and Technology (NACEPT) is a necessary committee which is in the... environmental policy, technology and management issues. Inquiries may be directed to Mark Joyce, U.S. EPA, (Mail...

  4. 77 FR 3475 - National Advisory Council for Environmental Policy and Technology

    Science.gov (United States)

    2012-01-24

    ... and Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of advisory committee... teleconference of the National Advisory Council for Environmental Policy and Technology (NACEPT). NACEPT provides advice to the EPA Administrator on a broad range of environmental policy, technology, and management...

  5. 78 FR 47316 - National Advisory Council for Environmental Policy and Technology

    Science.gov (United States)

    2013-08-05

    ... and Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Request for nominations to the National Advisory Council for Environmental Policy and Technology (NACEPT). SUMMARY: The U.S. Environmental... Environmental Policy and Technology (NACEPT). Vacancies are anticipated to be filled by February, 2014. Sources...

  6. Information and Communication Technology (ICT) Facilities and ...

    African Journals Online (AJOL)

    The library is at the centre of academic activities in every university. It is being transformed from the traditional operations to a service organization with the use of information and communication technology facilities. In this study, the researchers x-rayed ICT facilities and the skills level of the staff in the three universities in ...

  7. 78 FR 56952 - Notice of Meetings: Public Meetings of the National Science and Technology Council; Committee on...

    Science.gov (United States)

    2013-09-16

    ... Science and Technology Council; Committee on Technology; Nanoscale Science, Engineering, and Technology Subcommittee; National Nanotechnology Coordination Office AGENCY: Office of Science and Technology Policy. ACTION: Notice of public meetings. SUMMARY: The National Nanotechnology Coordination Office (NNCO), on...

  8. Tokamak Engineering Technology Facility scoping study

    Energy Technology Data Exchange (ETDEWEB)

    Stacey, W.M. Jr.; Abdou, M.A.; Bolta, C.C.

    1976-03-01

    A scoping study for a Tokamak Engineering Technology Facility (TETF) is presented. The TETF is a tokamak with R = 3 m and I/sub p/ = 1.4 MA based on the counterstreaming-ion torus mode of operation. The primary purpose of TETF is to demonstrate fusion technologies for the Experimental Power Reactor (EPR), but it will also serve as an engineering and radiation test facility. TETF has several technological systems (e.g., superconducting toroidal-field coil, tritium fuel cycle, impurity control, first wall) that are prototypical of EPR.

  9. Tokamak Engineering Technology Facility scoping study

    International Nuclear Information System (INIS)

    Stacey, W.M. Jr.; Abdou, M.A.; Bolta, C.C.

    1976-03-01

    A scoping study for a Tokamak Engineering Technology Facility (TETF) is presented. The TETF is a tokamak with R = 3 m and I/sub p/ = 1.4 MA based on the counterstreaming-ion torus mode of operation. The primary purpose of TETF is to demonstrate fusion technologies for the Experimental Power Reactor (EPR), but it will also serve as an engineering and radiation test facility. TETF has several technological systems (e.g., superconducting toroidal-field coil, tritium fuel cycle, impurity control, first wall) that are prototypical of EPR

  10. On-orbit technology experiment facility definition

    Science.gov (United States)

    Russell, Richard A.; Buchan, Robert W.; Gates, Richard M.

    1988-01-01

    A study was conducted to identify on-orbit integrated facility needs to support in-space technology experiments on the Space Station and associated free flyers. In particular, the first task was to examine the proposed technology development missions (TDMX's) from the model mission set and other proposed experimental facilities, both individually and by theme, to determine how and if the experiments might be combined, what equipment might be shared, what equipment might be used as generic equipment for continued experimentation, and what experiments will conflict with the conduct of other experiments or Space Station operations. Then using these results, to determine on-orbit facility needs to optimize the implementation of technology payloads. Finally, to develop one or more scenarios, design concepts, and outfitting requirements for implementation of onboard technology experiments.

  11. 77 FR 38092 - NASA Advisory Council; Information Technology Infrastructure Committee; Meeting

    Science.gov (United States)

    2012-06-26

    .... The meeting will be held for the purpose of soliciting from the information technology community and... NAC Information Technology Infrastructure Committee meeting in Building 28. All U.S. citizens and... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 12-048] NASA Advisory Council; Information...

  12. 76 FR 6163 - Subcommittee on Forensic Science; Committee on Science; National Science and Technology Council

    Science.gov (United States)

    2011-02-03

    ... Branch responses to the AFIS interoperability issues identified in the National Academy of Sciences 2009... OFFICE OF SCIENCE AND TECHNOLOGY POLICY Subcommittee on Forensic Science; Committee on Science; National Science and Technology Council ACTION: Notice of meeting. Public input is requested concerning...

  13. 75 FR 4882 - Subcommittee on Forensic Science; Committee on Science; National Science and Technology Council

    Science.gov (United States)

    2010-01-29

    ... OFFICE OF SCIENCE AND TECHNOLOGY POLICY Subcommittee on Forensic Science; Committee on Science; National Science and Technology Council ACTION: Notice of Panel Session. Public input is requested concerning appropriate Federal Executive Branch responses to the National Academy of Sciences 2009 report...

  14. 75 FR 10845 - Subcommittee on Forensic Science; Committee on Science; National Science and Technology Council

    Science.gov (United States)

    2010-03-09

    ... OFFICE OF SCIENCE AND TECHNOLOGY POLICY Subcommittee on Forensic Science; Committee on Science... participants. SUMMARY: The Subcommittee on Forensic Science of the National Science and Technology Council's... . Kenneth E. Melson, Co-Chair, Subcommittee on Forensic Science. [FR Doc. 2010-4899 Filed 3-8-10; 8:45 am...

  15. 76 FR 70779 - President's Council of Advisors on Science and Technology

    Science.gov (United States)

    2011-11-15

    ... University of Michigan North Campus Research Complex, 2800 Plymouth Road, Building 18, Ann Arbor, MI 48109... the University of Michigan North Research Complex from 8:30 a.m. to 2:45 p.m. on December 12, 2011... OFFICE OF SCIENCE AND TECHNOLOGY POLICY President's Council of Advisors on Science and Technology...

  16. International Facility for Food Irradiation Technology

    International Nuclear Information System (INIS)

    Farkas, J.

    1982-01-01

    The International Facility for Food Irradiation Technology (IFFIT) was set up in November 1978 for a period of five years at the Pilot Plant for Food Irradiation, Wageningen, The Netherlands under an Agreement between the FAO, IAEA and the Ministry of Agriculture and Fisheries of the Government of the Netherlands. Under this Agreement, the irradiation facilities, office space and services of the Pilot Plant for Food Irradiation are put at IFFIT's disposal. Also the closely located Research Foundation, ITAL, provides certain facilities and laboratory services within the terms of the Agreement. The FAO and IAEA contribute US-Dollar 25,000. Annually for the duration of IFFIT. (orig.) [de

  17. Adequacy Post-"Rose v. Council for Better Education" in Kentucky Public School Facilities: A Case Study

    Science.gov (United States)

    Wilson, Caroline Ford

    2013-01-01

    The decision in the 1989 landmark Kentucky case, "Rose v. Council for Better Education," initiated many reforms to ensure that children have access to an adequate education, including funding new construction and renovations for school facilities. The purpose of this instrumental, qualitative case study is to describe how the additional…

  18. Decommissioning of reactor facilities (2). Required technology

    International Nuclear Information System (INIS)

    Yanagihara, Satoshi

    2014-01-01

    Decommissioning of reactor facilities was planned to perform progressive dismantling, decontamination and radioactive waste disposal with combination of required technology in a safe and economic way. This article outlined required technology for decommissioning as follows: (1) evaluation of kinds and amounts of residual radioactivity of reactor facilities with calculation and measurement, (2) decontamination technology of metal components and concrete structures so as to reduce worker's exposure and production of radioactive wastes during dismantling, (3) dismantling technology of metal components and concrete structures such as plasma arc cutting, band saw cutting and controlled demolition with mostly remote control operation, (3) radioactive waste disposal for volume reduction and reuse, and (4) project management of decommissioning for safe and rational work to secure reduction of worker's exposure and prevent the spreading of contamination. (T. Tanaka)

  19. Methodology and technology of decommissioning nuclear facilities

    International Nuclear Information System (INIS)

    1986-01-01

    The decommissioning and decontamination of nuclear facilities is a topic of great interest to many Member States of the International Atomic Energy Agency (IAEA) because of the large number of older nuclear facilities which are or soon will be retired from service. In response to increased international interest in decommissioning and to the needs of Member States, the IAEA's activities in this area have increased during the past few years and will be enhanced considerably in the future. A long range programme using an integrated systems approach covering all the technical, regulatory and safety steps associated with the decommissioning of nuclear facilities is being developed. The database resulting from this work is required so that Member States can decommission their nuclear facilities in a safe time and cost effective manner and the IAEA can effectively respond to requests for assistance. The report is a review of the current state of the art of the methodology and technology of decommissioning nuclear facilities including remote systems technology. This is the first report in the IAEA's expanded programme and was of benefit in outlining future activities. Certain aspects of the work reviewed in this report, such as the recycling of radioactive materials from decommissioning, will be examined in depth in future reports. The information presented should be useful to those responsible for or interested in planning or implementing the decommissioning of nuclear facilities

  20. 77 FR 5282 - National Science and Technology Council

    Science.gov (United States)

    2012-02-02

    ... Public Meeting. SUMMARY: The National Nanotechnology Coordination Office (NNCO), on behalf of the Nanoscale Science, Engineering, and Technology (NSET) Subcommittee of the Committee on Technology, National... Impact of Nanotechnology'' on March 27-28, 2012. This symposium will bring together key policy makers...

  1. Decontamination Technology Development for Nuclear Research Facilities

    International Nuclear Information System (INIS)

    Oh, Won Zin; Jung, Chong Hun; Choi, Wang Kyu; Won, Hui Jun; Kim, Gye Nam

    2004-02-01

    Technology development of surface decontamination in the uranium conversion facility before decommissioning, technology development of component decontamination in the uranium conversion facility after decommissioning, uranium sludge treatment technology development, radioactive waste soil decontamination technology development at the aim of the temporary storage soil of KAERI, Optimum fixation methodology derivation on the soil and uranium waste, and safety assessment methodology development of self disposal of the soil and uranium waste after decontamination have been performed in this study. The unique decontamination technology applicable to the component of the nuclear facility at room temperature was developed. Low concentration chemical decontamination technology which is very powerful so as to decrease the radioactivity of specimen surface under the self disposal level was developed. The component decontamination technology applicable to the nuclear facility after decommissioning by neutral salt electro-polishing was also developed. The volume of the sludge waste could be decreased over 80% by the sludge waste separation method by water. The electrosorption method on selective removal of U(VI) to 1 ppm of unrestricted release level using the uranium-containing lagoon sludge waste was tested and identified. Soil decontamination process and equipment which can reduce the soil volume over 90% were developed. A pilot size of soil decontamination equipment which will be used to development of real scale soil decontamination equipment was designed, fabricated and demonstrated. Optimized fixation methodology on soil and uranium sludge was derived from tests and evaluation of the results. Safety scenario and safety evaluation model were development on soil and uranium sludge aiming at self disposal after decontamination

  2. 78 FR 70963 - NASA Advisory Council; Technology and Innovation Committee; Meeting

    Science.gov (United States)

    2013-11-27

    ... of the Technology and Innovation Committee (TIC) of the NASA Advisory Council (NAC). The meeting will... Propellant Storage and Transfer; and a discussion of barriers to innovation and innovation enablers. DATES... Barriers to Innovation and Innovation Enablers The meeting will be open to the public up to the seating...

  3. Scientific and Technological Facilities in CIEMAT

    International Nuclear Information System (INIS)

    Vaquero Ortiz, E. M.; Cascante Díaz, E.; González Pineda, L. M.

    2015-01-01

    The precise knowledge of the available Resources in an Organization, regardless the work it carries out, is an essential strategic enabler to achieve its goals. Material Resources are part of the resources in an organization, The “Material Resources” expression includes a wide span of elements, because a Material Resource, as a generic concept, is each and every specific physical mean, utilized to get any of the Organization objectives. In CIEMAT, as Public Research Agency, its Material Resources consist of its scientific and technological facilities. These resources are the basis of this Agency numerous amount of technical capabilities, allowing it to carry out its research, development and innovation activity to transfer its results to the society later. This report is a summary on CIEMAT scientific and technological facilities, whose spread can help to show its scientific and technological capabilities, to enable the execution of a wide variety of projects and to open new external cooperation channels. Outstanding among these facilities are two “Unique Scientific and Technological Infrastructures” (ICTS) and the Ionizing Radiations Metrology Laboratory (LMRI) which is the Spanish National Standards Laboratory for ionising radiations.

  4. Scientific and Technological Facilities in CIEMAT

    International Nuclear Information System (INIS)

    Vaquero Ortiz, E. M.

    2012-01-01

    The precise knowledge of the available Resources in an Organization, regardless the work it carries out, is an essential strategic enable to achieve its goals. Material Resources are part of the resources in an organization, The Material Resources expression includes a wide span of elements, because a Material Resource, as a generic concept, is each and every specific physical mean, utilised to get any of the Organization objectives. In case of CIEMAT, as Public Research Agency, its Material Resources consists of its scientific and technological facilities. These resources are the basis of this Agency numerous amount of technical capabilities, allowing it to carry out its research, development and innovation activity to transfer its results to the society later. This report is a summary on CIEMAT scientific and technological facilities, whose spread can help to show its scientific and technological capabilities, to enable the execution of a wide variety of projects and to open new external cooperation channels. In that list its possible to find the two Unique Scientific and Technological Infrastructures (ICTS) in Spain which are hold by CIEMAT and the Ionizing Radiations Metrology Laboratory (LMRI) which is the Spanish National Standards Laboratory for ionising radiations. (Author)

  5. Image processing technology for nuclear facilities

    International Nuclear Information System (INIS)

    Lee, Jong Min; Lee, Yong Beom; Kim, Woong Ki; Park, Soon Young

    1993-05-01

    Digital image processing technique is being actively studied since microprocessors and semiconductor memory devices have been developed in 1960's. Now image processing board for personal computer as well as image processing system for workstation is developed and widely applied to medical science, military, remote inspection, and nuclear industry. Image processing technology which provides computer system with vision ability not only recognizes nonobvious information but processes large information and therefore this technique is applied to various fields like remote measurement, object recognition and decision in adverse environment, and analysis of X-ray penetration image in nuclear facilities. In this report, various applications of image processing to nuclear facilities are examined, and image processing techniques are also analysed with the view of proposing the ideas for future applications. (Author)

  6. Results of the activities of the Scientific and Technical Coordination Council for Radiation Technique and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Sille, A K [Gosudarstvennyj Komitet po Ispol' zovaniyu Atomnoj Ehnergii SSSR, Moscow

    1977-03-01

    It is reported on the activities of the Scientific and Technical Coordination Council for Radiation Technique and Technology (STCC-RTT) of the CMEA Permanent Commission for the Peaceful Uses of Atomic Energy according to the programme 1971 to 1975. The STCC-RTT is concerned with technical applications such as radiation sterilization, food irradiation, radiation-induced chemical processes etc. The main tasks which have to be solved within the period from 1976 to 1980 are outlined.

  7. ALARA Council: Sharing our resources and experiences to reduce doses at Commonwealth Edison Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Rescek, F. [Commonwealth Edison Co., Downers Grove, IL (United States)

    1995-03-01

    Commonwealth Edison Company is an investor-owned utility company supplying electricity to over three million customers (eight million people) in Chicago and northern Illinois, USA. The company operates 16 generating stations which have the capacity to produce 22,522 megawatts of electricity. Six of these generating stations, containing 12 nuclear units, supply 51% of this capacity. The 12 nuclear units are comprised of four General Electric boiling water (BWR-3) reactors, two General Electric BWR-5 reactors, and six Westinghouse four-loop pressurized water reactors (PWR). In August 1993, Commonwealth Edison created an ALARA Council with the responsibility to provide leadership and guidance that results in an effective ALARA Culture within the Nuclear Operations Division. Unlike its predecessor, the Corporate ALARA Committee, the ALARA Council is designed to bring together senior managers from the six nuclear stations and corporate to create a collaborative effort to reduce occupational doses at Commonwealth Edison`s stations.

  8. Design, Evaluation and Test Technology Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The mission of this facility, which is composed of numerous specialized facilities, is to provide capabilities to simulate a wide range of environments for component...

  9. Effect of Information Communication Technology Facilities on ...

    African Journals Online (AJOL)

    This study examined the effect of ICT facilities on students' performance by comparing ... The comparison was conducted using subtests of English language and ... ICT facilities in all secondary schools to enhance teaching and learning.

  10. Proceedings of the Recycling Council of Ontario's energy from waste forum : is there a role for advanced thermal technologies in effective waste management?

    International Nuclear Information System (INIS)

    2006-01-01

    The lack of landfill capacity in Ontario and the threat of United States border closures to Canadian waste exportation has led to an increased interest in the viability of advanced thermal technologies for the management of waste residuals. Rising energy costs have also led governments and industries to examine the cost benefits of producing energy from waste (EFW) and using waste as a fuel replacement. This forum was held by the Recycling Council of Ontario to investigate the environmental and economic impacts of investing in EFW technologies. The forum was divided into 4 focus areas: (1) a comparison of the environmental and economic implications of landfilling and EFW technology; (2) an overview of facilities currently operating in Europe which included a policy and regulation background and an outline of technologies used; (3) an overview of EFW technologies currently used in Canada; (4) and an outline of municipal and privately-owned EFW pilot plants and proposed facilities in Ontario. Descriptions of facilities were provided, as well as a history of the policy decisions and processes needed to include EFW as a waste management tool. Issues concerning public consultation practices and the impact of EFW on waste diversion activities were reviewed, and a descriptions of EFW technologies were provided. Eleven presentations were given at the forum, 3 of which were catalogued separately for inclusion in this database. refs., tabs., figs

  11. Remote handling technology for nuclear fuel cycle facilities

    International Nuclear Information System (INIS)

    Sakai, Akira; Maekawa, Hiromichi; Ohmura, Yutaka

    1997-01-01

    Design and R and D on nuclear fuel cycle facilities has intended development of remote handling and maintenance technology since 1977. IHI has completed the design and construction of several facilities with remote handling systems for Power Reactor and Nuclear Fuel Development Corporation (PNC), Japan Atomic Energy Research Institute (JAERI), and Japan Nuclear Fuel Ltd. (JNFL). Based on the above experiences, IHI is now undertaking integration of specific technology and remote handling technology for application to new fields such as fusion reactor facilities, decommissioning of nuclear reactors, accelerator testing facilities, and robot simulator-aided remote operation systems in the future. (author)

  12. Decontamination Technology Development for Nuclear Research Facilities

    International Nuclear Information System (INIS)

    Choi, W. K.; Jung, C. H.; Oh, W. Z.

    2007-06-01

    The originative CO 2 pellet blasting equipment was developed by improving additional components such as feed screw, idle roller and air-lock feeder to clear up the problems of freezing and discontinuity of blasting and by adopting pneumatically operated vacuum suction head and vacuum cup to prevent recontamination by collecting contaminant particulates simultaneously with the decontamination. The optimum decontamination process was established according to the kind of materials such as metal, concrete and plastic and the type of contaminants such as particulate, fixed chemical compound and oil. An excellent decontamination performances were verified by means of the lab-scale hot test with radioactive specimen and the technology demonstration in IMEF hot cell. The PFC dry decontamination equipment applicable to the surface contaminated with high radioactive particulate was developed. This equipment consists of the unit processes such as spray, collection, filtration and dry distillation designed originatively applicable to inside of dry hot cell. Through the demonstration of PFC spray decontamination process in IMEF hot cell, we secured on-site applicability and the decontamination efficiency more than 90 %. We investigated the characteristics of dismantled metal waste melting and the radionuclide(Co, Cs, U) distribution into ingot and slag by melting decontamination experiments using electric arc melter. We obtained the decontamination factors greater than 100 for Cs and of 10∼100 for uranium. The pilot scale(200 kg/batch) demonstration for melting decontamination was carried out successfully using high temperature melting facility at KAERI. The volume reduction factor of 1/7 and the economical feasibility of the melting decontamination were verified.

  13. National Research Council Research Associateships Program with Methane Hydrates Fellowships Program/National Energy Technology Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Basques, Eric O. [National Academy of Sciences, Washington, DC (United States)

    2014-03-20

    This report summarizes work carried out over the period from July 5, 2005-January 31, 2014. The work was carried out by the National Research Council Research Associateships Program of the National Academies, under the US Department of Energy's National Energy Technology Laboratory (NETL) program. This Technical Report consists of a description of activity from 2005 through 2014, broken out within yearly timeframes, for NRC/NETL Associateships researchers at NETL laboratories which includes individual tenure reports from Associates over this time period. The report also includes individual tenure reports from associates over this time period. The report also includes descriptions of program promotion efforts, a breakdown of the review competitions, awards offered, and Associate's activities during their tenure.

  14. In the Scientific and Technological Council of National Mining Technological Supervision of the USSR

    Energy Technology Data Exchange (ETDEWEB)

    Manevich, V G

    1981-04-01

    A report is presented from the conference of the Scientific Council on preventing and fighting underground fires in coal mines and other mines, improving rescue equipment, and production of rescue equipment. Papers on activities of the major scientific institutes of the country investigating problems associated with fire prevention and fire fighting as well as design of life support systems, rescue equipment and safety engineering are discussed. Several rescue systems and life support systems are reviewed: Poiski-1 analyzer, Iskra oxygen analyzer; ShS-7m, ShSM-1 and ShRC-2 respirators; PSP, PSPM, PSA, and Vozduch emergency air supply systems. Recommendations on research activities and production of rescue equipment in the coal mining industry are formulated: production of a complex system of fire fighting mine cars moving on tracks (using foam and fire extinguishing powder); installation of the Vikhr-1 fire extinguishing system on existing fire fighting cars (P-2AP powder); starting industrial production of RKGD valves useful in rock burst prevention and in preventing dust hazard; improving methods of extinguishing endogenous fires, starting production of Gorizont-M fire detecting system, designing efficient systems detecting miners lost during mine accidents (sudden roof falls, rock bursts, etc.). (In Russian)

  15. The impact of CFD on development test facilities - A National Research Council projection. [computational fluid dynamics

    Science.gov (United States)

    Korkegi, R. H.

    1983-01-01

    The results of a National Research Council study on the effect that advances in computational fluid dynamics (CFD) will have on conventional aeronautical ground testing are reported. Current CFD capabilities include the depiction of linearized inviscid flows and a boundary layer, initial use of Euler coordinates using supercomputers to automatically generate a grid, research and development on Reynolds-averaged Navier-Stokes (N-S) equations, and preliminary research on solutions to the full N-S equations. Improvements in the range of CFD usage is dependent on the development of more powerful supercomputers, exceeding even the projected abilities of the NASA Numerical Aerodynamic Simulator (1 BFLOP/sec). Full representation of the Re-averaged N-S equations will require over one million grid points, a computing level predicted to be available in 15 yr. Present capabilities allow identification of data anomalies, confirmation of data accuracy, and adequateness of model design in wind tunnel trials. Account can be taken of the wall effects and the Re in any flight regime during simulation. CFD can actually be more accurate than instrumented tests, since all points in a flow can be modeled with CFD, while they cannot all be monitored with instrumentation in a wind tunnel.

  16. 75 FR 9007 - National Science and Technology Council, Committee on Technology Capstone Workshop Risk...

    Science.gov (United States)

    2010-02-26

    ... Nanotechnology: Public Meeting ACTION: Notice of public meeting. SUMMARY: The National Nanotechnology Coordination Office (NNCO), on behalf of the Nanoscale Science, Engineering, and Technology (NSET) Subcommittee... and Ethical, Legal, and Societal Implications (ELSI) of Nanotechnology. Risk Management Methods is one...

  17. Utilization Of Information And Communication Technology Facilities ...

    African Journals Online (AJOL)

    The purpose of this study was to investigate the types of ICT facilities used for the provision of library and information services in Nigerian University libraries. It was also set to determine if there is any significant difference between Southern and Northern Nigeria University libraries of the first, second and third generations in ...

  18. Application of information and communication technology facilities in ...

    African Journals Online (AJOL)

    ... technology facilities in technical services operations at Bayero University library, Nigeria. ... Victoria Sokari, Umar Garba Gama, Zanaib Abba Haliru, Kemi J. Olayemi, ... This paper examines the application of Information and Communication ...

  19. 76 FR 62469 - National Science and Technology Council, Committee on Technology; 2011 National Nanotechnology...

    Science.gov (United States)

    2011-10-07

    ... Technology; 2011 National Nanotechnology Initiative Environmental, Health, and Safety Strategy Webinar ACTION: Notice of webinar. SUMMARY: The National Nanotechnology Coordination Office (NNCO), on behalf of the..., telephone (703) 292-7128, National Nanotechnology Coordination Office. E-mail: [email protected] . Ted...

  20. Composites Manufacturing Education and Technology Facility Expedites Manufacturing Innovation

    Energy Technology Data Exchange (ETDEWEB)

    2017-01-01

    The Composites Manufacturing Education and Technology facility (CoMET) at the National Wind Technology Center at the National Renewable Energy Laboratory (NREL) paves the way for innovative wind turbine components and accelerated manufacturing. Available for use by industry partners and university researchers, the 10,000-square-foot facility expands NREL's composite manufacturing research capabilities by enabling researchers to design, prototype, and test composite wind turbine blades and other components -- and then manufacture them onsite. Designed to work in conjunction with NREL's design, analysis, and structural testing capabilities, the CoMET facility expedites manufacturing innovation.

  1. Occupational Safety Review of High Technology Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Lee Cadwallader

    2005-01-31

    This report contains reviews of operating experiences, selected accident events, and industrial safety performance indicators that document the performance of the major US DOE magnetic fusion experiments and particle accelerators. These data are useful to form a basis for the occupational safety level at matured research facilities with known sets of safety rules and regulations. Some of the issues discussed are radiation safety, electromagnetic energy exposure events, and some of the more widespread issues of working at height, equipment fires, confined space work, electrical work, and other industrial hazards. Nuclear power plant industrial safety data are also included for comparison.

  2. Development of Diagnostic Technology for Substation Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Kweon, D.J.; Yoon, J.Y. [Korea Electric Power Research Institute, Taejeon (Korea, Republic of)

    1998-09-01

    This report contains the conceptual design of predictive diagnostic system for KEPCO 765kV substation apparatus which will be operated in 2001. Various kinds of techniques in the world for power transformer and GIS monitoring were examined, then the integrated diagnosis system configuration which will be most effective in our future substation was suggested. In addition, the development of the optimum life management for substation facilities. development of a system to measure the ESDD of substation insulator surfaces at a distance and application study of the degradation sensor(PCS) were described also. (author) 55 refs., 27 figs., 68 tabs.

  3. Technological Advances, Human Performance, and the Operation of Nuclear Facilities

    Science.gov (United States)

    Corrado, Jonathan K.

    Many unfortunate and unintended adverse industrial incidents occur across the United States each year, and the nuclear industry is no exception. Depending on their severity, these incidents can be problematic for people, the facilities, and surrounding environments. Human error is a contributing factor in many such incidents. This dissertation first explored the hypothesis that technological changes that affect how operators interact within the systems of the nuclear facilities exacerbate the cost of incidents caused by human error. I conducted a review of nuclear incidents in the United States from 1955 through 2010 that reached Level 3 (serious incident) or higher on the International Nuclear Events Scale (INES). The cost of each incident at facilities that had recently undergone technological changes affecting plant operators' jobs was compared to the cost of events at facilities that had not undergone changes. A t-test determined a statistically significant difference between the two groups, confirming the hypothesis. Next, I conducted a follow-on study to determine the impact of the incorporation of new technologies into nuclear facilities. The data indicated that spending more money on upgrades increased the facility's capacity as well as the number of incidents reported, but the incident severity was minor. Finally, I discuss the impact of human error on plant operations and the impact of evolving technology on the 21st-century operator, proposing a methodology to overcome these challenges by applying the systems engineering process.

  4. Decommissioning Technology Development for Nuclear Research Facilities

    International Nuclear Information System (INIS)

    Lee, K. W.; Kang, Y. A.; Kim, G. H.

    2007-06-01

    It is predicted that the decommissioning of a nuclear power plant would happen in Korea since 2020 but the need of partial decommissioning and decontamination for periodic inspection and life extension still has been on an increasing trend and its domestic market has gradually been extended. Therefore, in this project we developed following several essential technologies as a decommissioning R and D. The measurement technology for in-pipe radioactive contamination was developed for measuring alpha/beta/gamma emitting nuclides simultaneously inside a in-pipe and it was tested into the liquid waste transfer pipe in KRR-2. And the digital mock-up system for KRR-1 and 2 was developed for choosing the best scenarios among several scenarios on the basis of various decommissioning information(schedule, waste volume, cost, etc.) that are from the DMU and the methodology of decommissioning cost estimation was also developed for estimating a research reactor's decommissioning cost and the DMU and the decommissioning cost estimation system were incorporated into the decommissioning information integrated management system. Finally the treatment and management technology of the irradiated graphites that happened after decommissioning KRR-2 was developed in order to treat and manage the irradiated graphites safely

  5. Decommissioning Technology Development for Nuclear Research Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Lee, K. W.; Kang, Y. A.; Kim, G. H. (and others)

    2007-06-15

    It is predicted that the decommissioning of a nuclear power plant would happen in Korea since 2020 but the need of partial decommissioning and decontamination for periodic inspection and life extension still has been on an increasing trend and its domestic market has gradually been extended. Therefore, in this project we developed following several essential technologies as a decommissioning R and D. The measurement technology for in-pipe radioactive contamination was developed for measuring alpha/beta/gamma emitting nuclides simultaneously inside a in-pipe and it was tested into the liquid waste transfer pipe in KRR-2. And the digital mock-up system for KRR-1 and 2 was developed for choosing the best scenarios among several scenarios on the basis of various decommissioning information(schedule, waste volume, cost, etc.) that are from the DMU and the methodology of decommissioning cost estimation was also developed for estimating a research reactor's decommissioning cost and the DMU and the decommissioning cost estimation system were incorporated into the decommissioning information integrated management system. Finally the treatment and management technology of the irradiated graphites that happened after decommissioning KRR-2 was developed in order to treat and manage the irradiated graphites safely.

  6. Strategies on Technology Transfer and Patents Commercialization for Nanotechnology at the Spanish National Research Council.

    Science.gov (United States)

    Maira, Javier; Etxabe, Javier; Serena, Pedro A

    2018-02-14

    Nanoscience and nanotechnology made their appearance in the scientific scene at a time when both the economy of Spain and the Spanish Research and Innovation System were experiencing strong growth. This circumstance resulted in a remarkable development of nanoscience and nanotechnology especially in universities and public research institutions such as the Spanish National Research Council (Consejo Superior de Investigaciones Científicas-CSIC). However, this development in academia has not been reflected in a similar increment in the transfer of knowledge to the productive sector despite several efforts and initiatives were launched. The CSIC, the main generator of scientific knowledge in Spain, has designed and implemented a series of actions in order to take advantage of the knowledge generated in nanotechnology by its research groups by mean of an appropriate transfer to both the Spanish and the international industry. Internal methodologies used in CSIC in order to protect and commercialize nanotechnology based intellectual property as well as their effects are reviewed. The evolution of CSIC nanotechnology patents portfolio is also analyzed. There has been a clear increase in the patent license agreements of CSIC in the period 2002- 2015 in the field of nanotechnology. This increase is correlated to these facts: (i) Highly qualified team managing Intellectual Property issues, (ii) The presence of CSIC in international fairs, and (iii) Proactive search of companies and investors. Successful results can be achieved in technology transfer when the appropriate resources are available and properly organized with an adequate combination of efforts in knowledge protection, promotion and commercialization of technologies and support to the scientific entrepreneurs of the institution. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  7. Advances in technology transfer at Federal Facilities

    International Nuclear Information System (INIS)

    Silva, R.R. Jr.

    1994-11-01

    The Hanford Site, located in the southeast portion of the state of Washington, is a 1450-hectare (560 square miles) reservation that was selected by the US Government in 1942 for production of the world's first nuclear weapons materials. For more than 40 years, defense production operations at Hanford generated hazardous and radioactive materials and wastes that for the most part remain there today. Environmental restoration of the Hanford Site is the primary mission of the Westinghouse Hanford Company (WHC) and it is also the thrust of the Tri-Party agreement among the US Environmental Protection Agency, the Washington State Department of Ecology and the US Department of Energy. Restoration will require treatment of about 1400 individual locations that are contaminated by chemically hazardous wastes, radioactive wastes, non-hazardous wastes and mixed hazardous and radioactive wastes. These locations include burial sites, storage facilities, obsolete buildings, settling ponds, waste cribs and large and small areas of near-surface and deep soil contamination. Burial trenches contain an estimated 109,000 cubic meters of low-level solid wastes contaminated with hazardous chemicals and radioactive materials. Approximately 450 sites were contaminated by discharge of liquids to the ground and there are about 250 additional areas where waste materials were spilled. At one time, ditches carried water from processing plants to settling/cooling ponds and 131 cribs were used over the years to dispose of slightly radioactive liquid wastes

  8. Nuclear facilities: repair and replacement technologies

    International Nuclear Information System (INIS)

    2005-01-01

    The oldest operating reactors are more than 35 years old and are now facing major maintenance operations. The first replacement of a pressurizer took place in autumn 2005 at the St-Lucie plant (Usa) while steam generators have been currently replaced since 1983. Nuclear industry has to adapt to this new market by proposing innovative technological solutions in the reactor maintenance field. This document gathers the 9 papers presented at the conference. The main improvements concern repair works on internal components of PWR-type reactors, the replacement of major components of the primary coolant circuit and surface treatments to limit the propagation of damages. The first paper shows that adequate design and feedback experience are good assets to manage the ageing of a nuclear unit. Another paper shows that a new repair method of a relief valve can avoid its replacement. (A.C.)

  9. Cryogenic technology review of cold neutron source facility for localization

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hun Cheol; Park, D. S.; Moon, H. M.; Soon, Y. P. [Daesung Cryogenic Research Institute, Ansan (Korea); Kim, J. H. [United Pacific Technology, Inc., Ansan (Korea)

    1998-02-01

    This Research is performed to localize the cold neutron source(CNS) facility in HANARO and the report consists of two parts. In PART I, the local and foreign technology for CNS facility is investigated and examined. In PART II, safety and licensing are investigated. CNS facility consists of cryogenic and warm part. Cryogenic part includes a helium refrigerator, vacuum insulated pipes, condenser, cryogenic fluid tube and moderator cell. Warm part includes moderator gas control, vacuum equipment, process monitoring system. Warm part is at high level as a result of the development of semiconductor industries and can be localized. However, even though cryogenic technology is expected to play a important role in developing the 21st century's cutting technology, it lacks of specialists and the research facility since the domestic market is small and the research institutes and government do not recognize the importance. Therefore, it takes a long research time in order to localize the facility. The safety standard of reactor for hydrogen gas in domestic nuclear power regulations is compared with that of the foreign countries, and the licensing method for installation of CNS facility is examined. The system failure and its influence are also analyzed. 23 refs., 59 figs., 26 tabs. (Author)

  10. Technical requirement of experiments and facilities for fusion nuclear technology

    International Nuclear Information System (INIS)

    Abdou, M.; Tillak, M.; Gierszwski, P.; Grover, J.; Puigh, R.; Sze, D.K.; Berwald, D.

    1986-06-01

    The technical issues and requirements of experiments and facilities for fusion nuclear technology (FNT) have been investigated. The nuclear subsystems addressed are: a) blanket, b) radiation shield, c) tritium processing system, and d) plasma interactive components. Emphasis has been placed on the important and complex development problems of the blanket. A technical planning process for FNT has been developed and applied, including four major elements: 1) characterization of issues, 2) quantification of testing requirements, 3) evaluation of facilities, and 4) development of a test plan to identify the role, timing, characteristics and costs of major experiments and facilities

  11. Research and test facilities required in nuclear science and technology

    International Nuclear Information System (INIS)

    2009-01-01

    Experimental facilities are essential research tools both for the development of nuclear science and technology and for testing systems and materials which are currently being used or will be used in the future. As a result of economic pressures and the closure of older facilities, there are concerns that the ability to undertake the research necessary to maintain and to develop nuclear science and technology may be in jeopardy. An NEA expert group with representation from ten member countries, the International Atomic Energy Agency and the European Commission has reviewed the status of those research and test facilities of interest to the NEA Nuclear Science Committee. They include facilities relating to nuclear data measurement, reactor development, neutron scattering, neutron radiography, accelerator-driven systems, transmutation, nuclear fuel, materials, safety, radiochemistry, partitioning and nuclear process heat for hydrogen production. This report contains the expert group's detailed assessment of the current status of these nuclear research facilities and makes recommendations on how future developments in the field can be secured through the provision of high-quality, modern facilities. It also describes the online database which has been established by the expert group which includes more than 700 facilities. (authors)

  12. Robotics for radioactive waste management in AEA technology facilities

    International Nuclear Information System (INIS)

    Legg, S.A.; Watson, C.J.H.; Staples, A.

    1992-01-01

    This paper describes the use of robotic technology in two AEA Technology facilities. In the first application, the task is standardized and repetitive, and is undertaken using a conventional industrial robot, operating in teach-and-repeat mode. In the second application, the task is non-repetitive, and requires the use of a variety of different tools. it is therefore undertaken by a nuclear engineered telerobot, with a tool change station

  13. Development of decommissioning, decontamination and reuse technology for nuclear facilities

    International Nuclear Information System (INIS)

    Lee, K. W.; Moon, J. K.; Choi, B. S.

    2012-03-01

    In this project, the foundation of decommissioning technology through the development of core technologies applied to maintenance and decommissioning of nuclear facility was established. First of all, we developed the key technology such as safety assessment technology for decommissioning work needed at the preparatory stage of decommissioning of the highly contaminated facilities and simultaneous measurement technology of the high-level alpha/beta contamination applicable to the operation and decommissioning of the nuclear facilities. Second, we developed a remotely controlled laser ablation decontamination system which is useful for a removal of fixed contaminants and developed a chemical gel decontamination technology for a removal of non-fixed contaminants during the maintenance and decommissioning works of high radiation hot cells which have been used for a recycling or treatment of spent fuels. Third, we developed a volume reduction and self-disposal technology for dismantled concrete wastes. Also, the technology for volume reduction and stabilization of the peculiar wastes(HEPA filter and organic mixed wastes), which have been known to be very difficult to treat and manage, generated from the high radioactive facilities in operation, improvement and repair and under decommissioning was developed. Finally, this research project was developed a system for the reduction of radiotoxicity of several uranium mixtures generated in the front- and back-end nuclear fuel cycles with characteristics of highly enhanced proliferation-resistance and more environmental friendliness, which can make the uranium to be recovered or separated from the mixtures with a high purity level enough for the uranium to be reused and to be classified as C-class level for burial near the surface, and then which result in the much reduction in volume of the uranium mixture wastes

  14. Technology standards for structure, etc. concerning nuclear power generating facilities

    International Nuclear Information System (INIS)

    1977-01-01

    Based on the Ordinance for the Technology Standards concerning Nuclear Power Generating Facilities, the technology standards are established for the vessels of class 1 to 4 (including reactor pressure vessels, reactor containment vessels, etc.), the pipes of class 1 to 3, safety valves, pressure test and monitoring test specimens. Those specified are materials, nondestructive tests, structures, shapes, shells, flanges, etc. for the vessels and the pipes, and so on. (Mori, K.)

  15. Physical security technologies for weapons complex reconfiguration facilities

    International Nuclear Information System (INIS)

    Jaeger, C.D.

    1994-01-01

    Sandia National Laboratories was a member of the Weapons Complex Reconfiguration (WCR) Safeguards and Security (S ampersand S) team providing assistance to the Department of Energy's (DOE) Office of Weapons Complex Reconfiguration. The physical security systems in the new and upgraded facilities being considered for the WCR had to meet DOE orders and other requirements set forth in the WCR Programmatic Design Criteria (PDC), incorporate the latest physical security technologies using proven state-of-the-art systems and meet fundamental security principles. The outcome was to avoid costly retrofits and provide effective and comprehensive protection against current and projected threats with minimal impact on operations, costs and schedule. Physical security requirements for WCR facilities include: (1) reducing S ampersand S life-cycle costs, (2) where feasible automating S ampersand S functions to minimize operational costs, access to critical assets and exposure of people to hazardous environments, (3) increasing the amount of delay to outsider adversary attack, (4) compartmentalizing the facility to minimize the number of personnel requiring access to critical areas and (5) having reliable and maintainable systems. To be most effective against threats physical security must be integrated with facility operations, safety and other S ampersand S activities, such as material control and accountability, nuclear measurements and computer and information security. This paper will discuss the S ampersand S issues, requirements, technology opportunities and needs. Physical security technologies and systems considered in the design effort of the Weapons Complex Reconfiguration facilities will be reviewed

  16. Development of Experimental Facilities for Advanced Spent Fuel Management Technology

    Energy Technology Data Exchange (ETDEWEB)

    You, G. S.; Jung, W. M.; Ku, J. H. [and others

    2004-07-01

    The advanced spent fuel management process(ACP), proposed to reduce the overall volume of the PWR spent fuel and improve safety and economy of the long-term storage of spent fuel, is under research and development. This technology convert spent fuels into pure metal-base uranium with removing the highly heat generating materials(Cs, Sr) efficiently and reducing of the decay heat, volume, and radioactivity from spent fuel by 1/4. In the next phase(2004{approx}2006), the demonstration of this technology will be carried out for verification of the ACP in a laboratory scale. For this demonstration, the hot cell facilities of {alpha}-{gamma} type and auxiliary facilities are required essentially for safe handling of high radioactive materials. As the hot cell facilities for demonstration of the ACP, a existing hot cell of {beta}-{gamma} type will be refurbished to minimize construction expenditures of hot cell facility. In this study, the design requirements are established, and the process detail work flow was analysed for the optimum arrangement to ensure effective process operation in hot cell. And also, the basic and detail design of hot cell facility and process, and safety analysis was performed to secure conservative safety of hot cell facility and process.

  17. Facility for protection of technological, especially power assemblies

    International Nuclear Information System (INIS)

    Cichon, S.; Hahn, J.; Malatek, K.; Randak, O.; Vitovec, P.; Zidek, M.

    1987-01-01

    The facility consists of sensors producing analog signals, used as input information for the evaluation of process conditions or equipment failures. The sensors are fitted to partial functional parts of technological assemblies, such as nuclear reactors. The individual sensors are connected via unification converters to the respective protection units. The facility is resistant to breakdowns of the analog sensors and other components including the computer; it features the possibility of in-service failure detection and the capability of immediate regeneration following a failure. This capability prevents, with high probability, the production of non-accident failures of the technological assembly. The block diagram is described of the facility and its operation in the event of an emergency. (J.B.). 1 fig

  18. Information Technology in Facilities Management - A Literature Review

    DEFF Research Database (Denmark)

    Ebbesen, Poul

    2015-01-01

    Purpose : The aim of this paper is to present the state of the art of research in Information Technology (IT) in Facilities Management (FM). Background : Initial studies indicate that investments into IT in FM often do not add the expected value, neither to the FM department itself nor...

  19. Adding Value to Facilities Management with Information Technology

    DEFF Research Database (Denmark)

    Ebbesen, Poul

    2016-01-01

    This PhD project investigates implementation and use of Information Systems (IS) and Information Technologies (IT) in the Facilities management (FM) business domain. This investigation is relevant because implementation and use of IS/IT in FM has potentials for improvements which can provide...

  20. The impact of health information technology adoption by outpatient facilities on pregnancy outcomes.

    Science.gov (United States)

    Deily, Mary E; Hu, Tianyan; Terrizzi, Sabrina; Chou, Shin-Yi; Meyerhoefer, Chad D

    2013-02-01

    Examine whether health information technology (HIT) at nonhospital facilities (NHFs) improves health outcomes and decreases resource use at hospitals within the same heath care network, and whether the impact of HIT varies as providers gain experience using the technologies. Administrative claims data on 491,832 births in Pennsylvania during 1998-2004 from the Pennsylvania Health Care Cost Containment Council and HIT applications data from the Dorenfest Institute. Fixed-effects regression analysis of the impact of HIT at NHFs on adverse birth outcomes and resource use. Greater use of clinical HIT applications by NHFs is associated with reduced incidence of obstetric trauma and preventable complications, as well as longer lengths of stay. In addition, the beneficial effects of HIT increase the longer that technologies have been in use. However, we find no consistent evidence on whether or how nonclinical HIT in NHFs affects either resource use or health outcomes. Clinical HIT applications at NHFs may reduce the likelihood of adverse birth outcomes, particularly after physicians and staff gain experience using the technologies. © Health Research and Educational Trust.

  1. Conceptual capital-cost estimate and facility design of the Mirror-Fusion Technology Demonstration Facility

    International Nuclear Information System (INIS)

    1982-09-01

    This report contains contributions by Bechtel Group, Inc. to Lawrence Livermore National Laboratory (LLNL) for the final report on the conceptual design of the Mirror Fusion Technology Demonstration Facility (TDF). Included in this report are the following contributions: (1) conceptual capital cost estimate, (2) structural design, and (3) plot plan and plant arrangement drawings. The conceptual capital cost estimate is prepared in a format suitable for inclusion as a section in the TDF final report. The structural design and drawings are prepared as partial inputs to the TDF final report section on facilities design, which is being prepared by the FEDC

  2. Development of decommissioning technology for nuclear fuel facility

    International Nuclear Information System (INIS)

    Tanimoto, Ken-ichi

    1998-01-01

    There are many kinds of objects for decommissioning and their properties are greatly different in respects of morphology, constituent materials, contamination history, etc. Therefore, the techniques for decontamination and dismantlement are required to have a great applicability. In addition, most of contamination nuclides have long half-life and so, it is desirable to rapidly take measures to stop or close a contaminated facility. In consideration of these characteristics developments of elementary techniques for decontamination have been attempted. This report summarized the present states of decommissioning technology for nuclear fuel facility. The function and performance of each elementary technique were examined through test operation and simulation was made for the important techniques of them aiming at generalization and optimization. For remote handling technology, two operation tools; 'metal splitting saw cutting tool' and 'plasma cutting tool' were produced and utilizations of these tools in combination with a robot for conveyance are under investigation now. (M.N.)

  3. 10 CFR 611.202 - Advanced Technology Vehicle Manufacturing Facility Award Program.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Advanced Technology Vehicle Manufacturing Facility Award... TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.202 Advanced Technology Vehicle Manufacturing Facility Award Program. DOE may issue, under the Advanced Technology Vehicle...

  4. Moving out. Technology transfer from hospitals to outpatient facilities.

    Science.gov (United States)

    Freedman, G

    1991-02-01

    The Temple Radiology Group opened on July 1, 1977 in the Temple Medical Center. The initial 10-room, full-service department has grown with new technology into approximately 25 rooms. The original four-room Temple surgery center has grown to 10 rooms. Additional support facilities that have evolved include: 1) a computer company; 2) physical therapy for orthopedic, neurological and cardiac patients; 3) a brain trauma center; 4) a collection agency; and most recently, 5) a 100-bed medical hotel.

  5. Verification of best available technology for the 300 Area Treated Effluent Disposal Facility (310 Facility)

    International Nuclear Information System (INIS)

    Wagner, R.N.

    1994-01-01

    This compilation of Project L-045H reference materials documents that the 300 Area Treated Effluent Disposal Facility (TEDF, also designated the 310 Facility) was designed, built, and will be operated in accordance with the best available technology (BAT) identified in the Engineering Summary Report. The facility is intended for treatment of 300 Area process sewer wastewater. The following unit operations for 300 Area process sewer water treatment are specified as: influent receipt; iron co-precipitation and sludge handling for removal of heavy metals and initial suspended solids; ion exchanged for removal of mercury and other heavy metals; ultraviolet (UV)/peroxide treatment for destruction of organic compounds, cyanide, coliforms, sulfide, and nitrite; and effluent discharge to the Columbia River with pH monitoring/control capability

  6. Use of information technology for medication management in residential care facilities: correlates of facility characteristics.

    Science.gov (United States)

    Bhuyan, Soumitra S; Chandak, Aastha; Powell, M Paige; Kim, Jungyoon; Shiyanbola, Olayinka; Zhu, He; Shiyanbola, Oyewale

    2015-06-01

    The effectiveness of information technology in resolving medication problems has been well documented. Long-term care settings such as residential care facilities (RCFs) may see the benefits of using such technologies in addressing the problem of medication errors among their resident population, who are usually older and have numerous chronic conditions. The aim of this study was two-fold: to examine the extent of use of Electronic Medication Management (EMM) in RCFs and to analyze the organizational factors associated with the use of EMM functionalities in RCFs. Data on RCFs were obtained from the 2010 National Survey of Residential Care Facilities. The association between facility, director and staff, and resident characteristics of RCFs and adoption of four EMM functionalities was assessed through multivariate logistic regression. The four EMM functionalities included were maintaining lists of medications, ordering for prescriptions, maintaining active medication allergy lists, and warning of drug interactions or contraindications. About 12% of the RCFs adopted all four EMM functionalities. Additionally, maintaining lists of medications had the highest adoption rate (34.5%), followed by maintaining active medication allergy lists (31.6%), ordering for prescriptions (19.7%), and warning of drug interactions or contraindications (17.9%). Facility size and ownership status were significantly associated with adoption of all four EMM functionalities. Medicaid certification status, facility director's age, education and license status, and the use of personal care aides in the RCF were significantly associated with the adoption of some of the EMM functionalities. EMM is expected to improve the quality of care and patient safety in long-term care facilities including RCFs. The extent of adoption of the four EMM functionalities is relatively low in RCFs. Some RCFs may strategize to use these functionalities to cater to the increasing demands from the market and also to

  7. Spanish Minister of Science and Technology visits the LHC magnet test facility

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    H.E. Mr Josep Piqué i Camps, Minister of Science and Technology, Spain, toured the test facility for LHC magnets in building SM18 during his visit to CERN in November. In this series of photos Felix Rodriguez Mateo explains the operation of the test facilty to the ministerial party. Photo 01: (left to right) Felix Rodriguez Mateo; the Minister; Francisco Giménez-Reyna, Spanish delegate to the CERN Finance Committee; M. Aguilar Benitez, Spanish delegate to the CERN Council; G. Babé and G. Léon. Photo 02: (left to right) Felix Rodriguez Mateos; César Dopazo, Director-General of CIEMAT (Spanish Research Centre for Energy, Environment and Technology); the Minister; G. Babé; M. Aguilar Benitez; and G. Léon. Photo 03: Francisco Giménez-Reyna; Felix Rodriguez Mateos; César Dopazo; the Minister; Juan Antonio Rubio, leader of the Education and Technology Transfer division at CERN; G. Babé behind M. Aguilar Benitez. Photo 04: Francisco Giménez-Reyna, partially hidden behind Felix Rodriguez Mateos; César Dop...

  8. Spanish Minister of Science and Technology visits the LHC magnet test facility

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    H.E. Mr Josep Piqué i Camps, Minister for Science and Technology, Spain, toured the test facility for LHC magnets in building SM18 during his visit to CERN in November. Photos 01, 02: (left to right) M. Cerrada, CERN; Francisco Giménez-Reyna, Spanish delegate to the CERN Finance Committee; G. Léon; Juan Antonio Rubio, leader of the Education and Technology Transfer division at CERN; M. Aguilar-Benitez, Spanish delegate to CERN Council; (behind) H.E. Mr Joaquin Pérez-Villanueva y Tovar, Ambassador and Permanent Representative of Spain to the United Nations in Geneva; the Minister; Manuel Delfino, leader of the Information Technology division at CERN; bodyguard; Matteo Cavalli-Sforza, ATLAS national contact physicist for Spain; Felix Rodriguez Mateos, CERN; G. Babé. Visible in the left background is one of the test benches where magnets are prepared for installation in String 2: the full-scale model of an LHC cell of the regular part of the arc. The extremity of String 2, which measures 120 m and runs the ...

  9. Proceedings of the Seminar 'Irradiation Technologies and the IRASM Facility'

    International Nuclear Information System (INIS)

    Ponta, Corneliu Catalin; Moise, Ioan Valentin

    1999-01-01

    The seminar devoted to 'Irradiation Technologies and the IRASM Facility' aimed at debating the principal problems related to one of the most important project ever developed in Romania, at the Horia Hulubei National Institute of Physics and Nuclear Engineering, in collaboration with IAEA. IRASM (an acronym for Multiple Purpose Irradiation Facility) is using initially a 60 Co of 100 kCi irradiation source (to be replaced after an promotional stage by a 2 MCi Co source). It is designed to irradiate a materials volume of about 35,000 m 3 /year. Health, agriculture, food industry and materials industry are the most targeted customers. It will be used for sterilization of medical materials and pharmaceuticals products, peat and seed (and other agricultural products) decontamination and sterilization, experimental irradiation of food products, irradiation of composite plastics and other industrial products, etc. The seminar was a first meeting of Romanian specialists in radiation processing with potential users of these technologies as well as with decision making persons working with national governmental and regulation authorities. Twelve communications were presented as a basis for discussion. These were: 1. IRASM - a technical assistance IAEA project and the prospects for technological irradiation in Romania (Serban Dobrescu); 2. IRASM facility - goal, present stage, perspectives (Corneliu C. Ponta); 3. Nuclear safeguards and radioprotection at IRASM (Ioan Valentin Moise); 4. Nuclear safeguard policy for IRASM (Mariana Irimia, Gabriela Vladescu, Ion Cristian); 5. Technological dosimetry at IRASM (Rodica Macrin, Rodica Moraru, Nicolae Valcov); 6. Quality assurance in building and exploiting IRASM (Ioana Domsa); 7. Current status of irradiation technologies in IFIN-HH (Mitica Dragusin); 8. Chemical-pharmaceutical, cosmetic and medical product sterilization (Paul Adrian, Eleonora Gheorghiu); 9. The concept of sterilization and the sterilization testing (Ileana Petcu

  10. Scientific and Technological Facilities in CIEMAT; Las Instalaciones del CIEMAT

    Energy Technology Data Exchange (ETDEWEB)

    Vaquero Ortiz, E M

    2012-09-13

    The precise knowledge of the available Resources in an Organization, regardless the work it carries out, is an essential strategic enable to achieve its goals. Material Resources are part of the resources in an organization, The Material Resources expression includes a wide span of elements, because a Material Resource, as a generic concept, is each and every specific physical mean, utilised to get any of the Organization objectives. In case of CIEMAT, as Public Research Agency, its Material Resources consists of its scientific and technological facilities. These resources are the basis of this Agency numerous amount of technical capabilities, allowing it to carry out its research, development and innovation activity to transfer its results to the society later. This report is a summary on CIEMAT scientific and technological facilities, whose spread can help to show its scientific and technological capabilities, to enable the execution of a wide variety of projects and to open new external cooperation channels. In that list its possible to find the two Unique Scientific and Technological Infrastructures (ICTS) in Spain which are hold by CIEMAT and the Ionizing Radiations Metrology Laboratory (LMRI) which is the Spanish National Standards Laboratory for ionising radiations. (Author)

  11. 78 FR 74129 - National Advisory Council for Environmental Policy and Technology

    Science.gov (United States)

    2013-12-10

    ... for Environmental Policy and Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Notice... Environmental Policy and Technology (NACEPT). NACEPT provides advice to the EPA Administrator on a broad range of environmental policy, technology, and management issues. NACEPT members represent academia...

  12. Development of the Decommissioning Technology for Nuclear Facilities

    International Nuclear Information System (INIS)

    Lee, K. W.; Kim, G. N.; Kim, S. G.

    2010-04-01

    The evaluation technology of decommissioning process must be developed and will be used for the ALARA planning tool of decommissioning process and demonstrated for tools of decommissioning equipment. Also, this technology can be used for tools workplaces with high work difficulty such as large-scale chemical plant, under water and space. The monitoring system for high alpha radioactive contamination measurement will be use in the high radioactivity decommissioning sites such as hot-cell or glove box. Also, it will be use in the general nuclear facilities as the radiation monitoring unit. The preparation technology of the radiation sensor for high radioactive contamination measurement will be transferred to the company for the industrialization. The remote monitoring system can prevent the workers exposure using the optical fiber to separate the sensor and electronics

  13. Development of the Decontamination and Decommissioning Technology for Nuclear Facilities

    International Nuclear Information System (INIS)

    Lee, K. W.; Moon, J. K.; Won, C. H.

    2010-04-01

    The research results could be used for a design of a remote ablation decontamination system and ultimately applicable for an decontamination of high radiation facilities such as the DUPIC and PIEF. The evaluation technology of decommissioning process must be developed and will be used for the ALARA planning tool of decommissioning process and demonstrated for tools of decommissioning equipment. Also, this technology can be used for tools workplaces with high work difficulty such as large-scale chemical plant, under water and space. It is expected that the technology for a volume reduction and self-disposal of dismantled concrete wastes can be contributed to the establishment of a management plan for radioactive dismantled concrete wastes through the minimization of final waste volume

  14. Application technology for optical fiber in nuclear facilities

    International Nuclear Information System (INIS)

    Lee, Jong Min; Kim, Chul Jung; Lee, Yong Bum; Kim, Woong Ki; Yoon, Tae Seob; Sohn, Surg Won; Kim, Chang Hoi; Hwang, Suk Yong; Baik, Sung Hum; Kwon, Seong Ouk

    1987-12-01

    Lately, the optical fiber increasingly used in such adverse environments as nuclear power plant, radiation facilities because of their endurant properties against heat, radiation, corrosion, etc. Moreover, the transmission of signal through optical fiber does not induce interference from the electromagnetic wave. Basic theory about the optical fiber technology was studied and the developed techniques for nuclear facilities were reviewed. Since the radiations change the characteristics of the optical fiber, the effects of γ-ray irradiation on single mode and multimode optical fiber were examined. The image transmission system through optical fiber bundle was designed, constructed, and tested. Its software system was also updated. It can be used for remote internal inspection in adverse environment. (Author)

  15. Solar energy and conservation technologies for Caribbean Tourist Facilities (CTF)

    Science.gov (United States)

    The primary objectives of the Caribbean Tourist Facilities (CTF) project were to develop and publish materials and conduct workshops on solar energy and conservation technologies that would directly address the needs and interests of tourist facilities in the Caribbean basin. Past contacts with the Caribbean and US tourist industries indicated that decision-makers remained unconvinced that renewable technologies could have a significant impact on development and operation costs or that renewable energy products and services suited their needs. In order to assure that the materials and programs developed were responsive to the Caribbean tourist industry and U.S. conservation and renewable energy industries, marketing research with potential end users and the organizations and associations that serve those users was included as an underlying task in the project. The tasks outlined in the CTF Statement of Work included conference planning, gathering of field data, development of educational materials, and conduct of workshop(s). In addition to providing a chronicle of the fulfillment of those tasks, this final report includes suggestions for distributing the documents developed during the project, venues for future workshops, and other technology transfer and market influence strategies.

  16. Proceeding of the 7. Seminar on Technology and Safety of Nuclear Power Plants and Nuclear Facilities

    International Nuclear Information System (INIS)

    Hastowo, Hudi; Antariksawan, Anhar R.; Soetrisnanto, Arnold Y; Jujuratisbela, Uju; Aziz, Ferhat; Su'ud, Zaki; Suprawhardana, M. Salman

    2002-02-01

    The seventh proceedings of seminar safety and technology of nuclear power plant and nuclear facilities, held by National Nuclear Energy Agency. The Aims of seminar is to exchange and disseminate information about safety and nuclear Power Plant Technology and Nuclear Facilities consist of technology; high temperature reactor and application for national development sustain able and high technology. This seminar level all aspects technology, Power Reactor research reactor, high temperature reactor and nuclear facilities. The article is separated by index

  17. Maintenance and disassembly considerations for the Technology Demonstration Facility

    International Nuclear Information System (INIS)

    Spampinato, P.T.

    1983-01-01

    The Technology Demonstration Facility (TDF) is a tandem-mirror design concept carried out under the direction of Lawrence Livermore National Laboratory. It was conceived as a near-term device with a mission of developing engineering technology in a D-T fusion environment. Overall maintenance and component disassembly were among the responsibilities of the Fusion Engineering Design Center (FEDC). A configuration evolved that was based on the operational requirements of the components, as well as the requirements for their replacements. Component lifetime estimates were used to estimate the frequency and the number of replacements. In addition, it was determined that the need for remote handling equipment followed within 1.5 years after initial start-up, emphasizing the direct relationship between developing maintenance scenarios/equipment and the device configuration. Many of the scheduled maintenance operations were investigated to first order, and preliminary handling equipment concepts were developed

  18. Development of Decontamination and Decommissioning Technologies for Nuclear Facilities

    International Nuclear Information System (INIS)

    Moon, Jei Kwon; Lee, Kune Woo; Won, Hui Jun

    2010-04-01

    A laser ablation decontamination technology which is reportedly effective for a removal of fixed contaminants has been developed for three years as the first stage of the development. Lab scale experimental equipment was fabricated and the process variables have been assessed for determination of appropriate decontamination conditions at the laser wave lengths of 1,064 nm and 532 nm, respectively. The decontamination tests using radioactive specimens showed that the decontamination efficiency was about 100 which is quite a high value. An electrokinetic-flushing, an agglomeration leaching and a supercritical CO 2 soil decontamination technology were development for a decontamination of radioactive soil wastes from the decommissioned sites of the TRIGA research reactor and the uranium conversion facilities. An electrokinetic-flushing process was found to be effective for soil wastes aged for a long time and an agglomeration leaching process was effective for soil wastes of surface contamination. On the other hand, a supercritical CO 2 soil decontamination technology was found to be applicable for U or TRU bearing soil wastes. The remediation monitoring key technologies such as a representative sample taking and a measurement concept for the vertical distribution of radionuclides were developed for an assessment of the site remediation. Also an One-Dimensional Water Flow and Contaminant Transport in Unsaturated Zone (FTUNS) code was developed to interpretate the radionuclide migration in the unsaturated zone

  19. 75 FR 35851 - Partially Closed Meeting of the President's Council of Advisors on Science and Technology

    Science.gov (United States)

    2010-06-23

    ... manufacturing; science, technology, engineering, and mathematics (STEM) education; health information technology... only for substantive commentary on PCAST's work, not for business marketing purposes. Oral Comments: To... should contact Dr. Stine at least ten business days prior to the meeting so that appropriate arrangements...

  20. 77 FR 26273 - President's Council of Advisors on Science and Technology (PCAST)

    Science.gov (United States)

    2012-05-03

    ... will provide information on the National Institute of Food and Agriculture, the U.S. Chief Technology... convenience and to maintain Secret Service protection. This meeting will be closed to the public because such...

  1. 76 FR 40753 - NASA Advisory Council; Technology and Innovation Committee; Meeting

    Science.gov (United States)

    2011-07-11

    ..., technology transfer and licensing activities within NASA, the private sector, and other government agencies...: full name; gender; date/ place of birth; citizenship; visa/green card information (number, type...

  2. Proceedings of the international workshop on hadron facility technology

    Energy Technology Data Exchange (ETDEWEB)

    Thiessen, H.A. (comp.)

    1987-12-01

    The conference included papers on facility plans, beam dynamics, accelerator hardware, and experimental facilities. Individual abstracts were prepared for 43 papers in the conference proceedings. (LEW)

  3. Shielding technology for high energy radiation production facility

    International Nuclear Information System (INIS)

    Lee, Byung Chul; Kim, Heon Il

    2004-06-01

    In order to develop shielding technology for high energy radiation production facility, references and data for high energy neutron shielding are searched and collected, and calculations to obtain the characteristics of neutron shield materials are performed. For the evaluation of characteristics of neutron shield material, it is chosen not only general shield materials such as concrete, polyethylene, etc., but also KAERI developed neutron shields of High Density PolyEthylene (HDPE) mixed with boron compound (B 2 O 3 , H 2 BO 3 , Borax). Neutron attenuation coefficients for these materials are obtained for later use in shielding design. The effect of source shape and source angular distribution on the shielding characteristics for several shield materials is examined. This effect can contribute to create shielding concept in case of no detail source information. It is also evaluated the effect of the arrangement of shield materials using current shield materials. With these results, conceptual shielding design for PET cyclotron is performed. The shielding composite using HDPE and concrete is selected to meet the target dose rate outside the composite, and the dose evaluation is performed by configuring the facility room conceptually. From the result, the proper shield configuration for this PET cyclotron is proposed

  4. 77 FR 67028 - NASA Advisory Council; Information Technology Infrastructure Committee; Meeting

    Science.gov (United States)

    2012-11-08

    .... SUPPLEMENTARY INFORMATION: The agenda topics for the meeting will include: Information Technology--The Effects... Center Chandra/X-Ray Astronomy Mobile Applications Wide Area Networks The meeting will be open to the....S. visa information to include type, number, and expiration date, U.S. Social Security Number (if...

  5. 78 FR 68040 - President's Council of Advisors on Science and Technology Meeting

    Science.gov (United States)

    2013-11-13

    ... provide updates on its studies of education information technology and cyber- security. Additional... only for substantive commentary on PCAST's work, not for business marketing purposes. Oral Comments: To... ten business days prior to the meeting so that appropriate arrangements can be made. Issued in...

  6. 77 FR 67808 - President's Council of Advisors on Science and Technology (PCAST)

    Science.gov (United States)

    2012-11-14

    ...-secondary science, technology, engineering, and mathematics (STEM) education. PCAST will also receive an... only for substantive commentary on PCAST's work, not for business marketing purposes. Oral Comments: To.... Amber Hartman Scholz at least ten business days prior to the meeting so that appropriate arrangements...

  7. 75 FR 47317 - President's Council of Advisors on Science and Technology

    Science.gov (United States)

    2010-08-05

    ... mathematics (STEM) education; and the energy technology innovation system. Additional information and the... public comment period is designed only for substantive commentary on PCAST's work, not for business... public meeting should contact Dr. Stine at least ten business days prior to the meeting so that...

  8. 78 FR 35617 - President's Council of Advisors on Science and Technology (PCAST)

    Science.gov (United States)

    2013-06-13

    ... available to him from inside the White House and from cabinet departments and other Federal agencies. See..., Director, Office of Science and Technology Policy, Executive Office of the President, The White House; and... to hear from speakers who will provide information on ``smart cities'' and mathematical sciences...

  9. 78 FR 36547 - Technological Advisory Council Recommendation for Improving Receiver Performance

    Science.gov (United States)

    2013-06-18

    ... of receivers in ensuring the efficient use of spectrum and to provide recommendations on avoiding obstacles posed by receiver performance to making spectrum available for new services. The Office of... Pavlak, Office of Engineering and Technology, Electromagnetic Compatibility Division, Room 6-A420...

  10. Report on identification of federal radiation issues: To the Federal Coordinating Council for Science, Engineering and Technology

    International Nuclear Information System (INIS)

    1986-03-01

    The Committee on Interagency Radiation Research and Policy Coordination (CIRRPC) was established on April 9, 1984 by the Office of Science and Technology Policy (OSTP) under the authority of the Federal Coordinating Council for Science, Engineering and Technology (FCCSET). It is chaired by OSTP. CIRRPC membership consists of those agencies having specific responsibilities or interest in radiation research and/or policy. CIRRPC has two elements: The Committee itself, consisting of subcabinet and senior policy level representatives, and a Science Panel, consisting of senior radiation scientists from the respective member agencies. The structure and membership of CIRRPC is shown in Figure 2. It was decided at the inception of CIRRPC to identify the radiation issues of concern to the Federal agencies, Congress, and professional societies faced with radiation policy or scientific issues. It was felt that a current list of national radiation issues should be assembled so that CIRRPC could concentrate on these issues and the dividends from CIRRPC's resources could be maximized at the earliest possible time. These issues are listed

  11. Introduction to Technology Export License of Nuclear Facility

    International Nuclear Information System (INIS)

    Seo, Hana; Lee, Chansuh; Shin, Donghoon

    2014-01-01

    In this regime, the Nuclear Safety and Security Commission (NSSC) has authority on final decision making. And the Korea Institute of Nuclear nonproliferation and Control (KINAC) has missions to review the classification and export licensing technically. In principle, classification and export licensing are applied and reviewed individually. However, the number of application for classification and licensing has increased geometrically in the last three years. This is largely a due to the contract that the Republic of Korea (ROK) has finalized to build the UAE Barakah Nuclear Power Plant (BNPP) and Jordan Research and Training Reactor (JRTR). This circumstance brought an administrative burden for the government and related institutes as well as stakeholders. This article introduces the law related to the 'Technology Export License of Nuclear Facility' which was developed and legislated to improve the efficiency and effectiveness of commodities classification and export licensing. This system could significantly reduce the licensing burden for transferring the technologies. However, the classification and license on this system are still requested when transferring the goods. Therefore, KINAC will continue to figure out the needs for the stakeholders and keep searching for solutions to problems inherent in the industry

  12. Introduction to Technology Export License of Nuclear Facility

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Hana; Lee, Chansuh; Shin, Donghoon [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

    2014-05-15

    In this regime, the Nuclear Safety and Security Commission (NSSC) has authority on final decision making. And the Korea Institute of Nuclear nonproliferation and Control (KINAC) has missions to review the classification and export licensing technically. In principle, classification and export licensing are applied and reviewed individually. However, the number of application for classification and licensing has increased geometrically in the last three years. This is largely a due to the contract that the Republic of Korea (ROK) has finalized to build the UAE Barakah Nuclear Power Plant (BNPP) and Jordan Research and Training Reactor (JRTR). This circumstance brought an administrative burden for the government and related institutes as well as stakeholders. This article introduces the law related to the 'Technology Export License of Nuclear Facility' which was developed and legislated to improve the efficiency and effectiveness of commodities classification and export licensing. This system could significantly reduce the licensing burden for transferring the technologies. However, the classification and license on this system are still requested when transferring the goods. Therefore, KINAC will continue to figure out the needs for the stakeholders and keep searching for solutions to problems inherent in the industry.

  13. Tritium research and technology facilities at the JRC-Ispra

    International Nuclear Information System (INIS)

    Dworschak, H.; Mannone, F.; Perujo, A.; Pierini, G.; Reiter, F.; Vassallo, G.; Viola, A.; Camposilvan, J.; Douglas, K.; Grassi, G.; Lolli Ceroni, P.; Simonetta, A.; Spelta, B.

    1990-01-01

    A set of experiments which are of prominent interest for the development of nuclear fusion technology in Europe are planned by the JRC-Ispra for the near future, in the frame of experimental activities to be performed in ETHEL, the European Tritium Handling Experimental Laboratory under construction at the Ispra site. These experiments already included for the most part as JRC-Task Action Sheets in the 1989-1991 European Technology Programme Actions will initiate in ETHEL on a fully active laboratory scale starting mid-1991. They will concern the following research areas: Recycling of tritium from first wall materials; Tritium recovery from water cooled Pb-17Li blankets; Detritiation of ventilation atmospheres; Plasma exhaust processing; Tritiazed waste management. In view of fully active tritium experiments in ETHEL and to obtain information of the basic processes involved, since 1985 preparatory experimental studies are being performed at the JRC-Ispra laboratories using hydrogen and deuterium. Furthermore, always with regard to ETHEL experiments, particular attention is given to possible technical and managerial problems which potentially may arise in this context. To identify at an early stage such problems a questionnaire has been developed and distributed to researchers in conjunction with an ETHEL information packet. The questionnaire demands information regarding the scope, design and operation of the intended experiment as well as planning and required support to be supplied by ETHEL. A brief description of experimental preparatory studies and future tritium handling experiments in ETHEL as well of the ETHEL facility is here presented. (orig.)

  14. Fact Sheet for Friction Materials Manufacturing Facilities Residual Risk and Technology Review

    Science.gov (United States)

    proposed amendments to the National Emission Standards for Hazardous Air Pollutants (NESHAP) for Friction Materials Manufacturing Facilities to address the results of the residual risk and technology review

  15. Development of Demonstration Facility Design Technology for Advanced Nuclear Fuel Cycle Process

    International Nuclear Information System (INIS)

    Cho, Il Je; You, G. S.; Choung, W. M.

    2010-04-01

    The main objective of this R and D is to develop the PRIDE (PyRoprocess Integrated inactive DEmonstration) facility for engineering-scale inactive test using fresh uranium, and to establish the design requirements of the ESPF (Engineering Scale Pyroprocess Facility) for active demonstration of the pyroprocess. Pyroprocess technology, which is applicable to GEN-IV systems as one of the fuel cycle options, is a solution of the spent fuel accumulation problems. PRIDE Facility, pyroprocess mock-up facility, is the first facility that is operated in inert atmosphere in the country. By using the facility, the functional requirements and validity of pyroprocess technology and facility related to the advanced fuel cycle can be verified with a low cost. Then, PRIDE will contribute to evaluate the technology viability, proliferation resistance and possibility of commercialization of the pyroprocess technology. The PRIDE evaluation data, such as performance evaluation data of equipment and operation experiences, will be directly utilized for the design of ESPF

  16. 48 CFR 3004.470 - Security requirements for access to unclassified facilities, Information Technology resources...

    Science.gov (United States)

    2010-10-01

    ... access to unclassified facilities, Information Technology resources, and sensitive information. 3004.470... Technology resources, and sensitive information. ... ACQUISITION REGULATION (HSAR) GENERAL ADMINISTRATIVE MATTERS Safeguarding Classified and Sensitive Information...

  17. The development of robot application technology in nuclear facilities

    International Nuclear Information System (INIS)

    Kim, Seung Ho; Lee, Jong Min; Kim, Chang Hoe; Kim, Byung Soo; Sohn, Surg Won; Hwoang, Suk Yeoung; Lee, Yong Bum; Kim, Woong Ki

    1992-12-01

    The objective of this project is to establish the basic technologies for advanced robotic systems operated in unstructured environment. The developed robotic system, which is remotely controlled, is expected to reduce the radiation dosage for workers who do the maintenance, inspection, and repairing work in nuclear facilities. The two major work scopes of this project in this year are to study the control scheme of advanced robotic system and develop a mobile robot. An inverse kinematic algorithm of 7 degrees of freedom anthropomorphic manipulator is investigated for dexterous control. Extended closed-loop schemes for solving the inverse kinematics of the redundant manipulator have been proposed and decentralized adaptive controller was designed by utilizing a new cartesian space controller. Control architecture of neural network has been developed, which has a strong capability on solving the kinematics of manipulator. The planetary wheel assembly has been implemented in the design to be suitable for plant. The design of manipulator has been implemented to operate with the battery power in the mobile system. This project will continue to be a major technical driver, with nuclear plant maintenance and waste management applications in conjunction with 'Long-term nuclear development program' over the next decade. (Author)

  18. Profile and scientific production of Brazilian National Council of Technological and Scientific Development researchers in Pediatrics

    Directory of Open Access Journals (Sweden)

    Maria Christina L. Oliveira

    2013-09-01

    Full Text Available OBJECTIVE: To evaluate the profile and the scientific production of researchers in Pediatrics with scholarship from the National Counsel of Technological and Scientific Development. METHODS: The Lattes curricula of 34 researchers in Pediatrics with active scholarships, from 2006 to 2008 were included in the analysis. The variables of interest were: gender, affiliation, time since PHD, tutoring of undergraduate students, mentorship of masters and doctors, scientific production and the papers' impact. RESULTS: In a total of 411 researchers in Medicine, 34 (8% belonged to Pediatrics. Males (77% and scholars in the category 2 of productivity (62% prevailed. Three states of Brazil were responsible for approximately 90% of the researchers: São Paulo (53%, Minas Gerais (21%, and Rio Grande do Sul (15%. During their academic career, the Pediatrics researchers have published 3,122 articles with a median of 89 articles per researcher (interquartile range - IQ=51-119. Of the total, 40 and 59% articles were indexed in the Web of Science and Scopus databases, respectively. The Pediatrics researchers have published papers in 599 journals with a median impact factor of 2.35 (IQ=1.37-3.73 for the 323 indexed journals. CONCLUSIONS: The Pediatrics researchers have a relevant scientific output from the quantity point of the view, but there is a need to improve quality.

  19. Profile and scientific production of Brazilian National Council of Technological and Scientific Development researchers in Pediatrics.

    Science.gov (United States)

    Oliveira, Maria Christina L; Martelli, Daniella Reis B; Pinheiro, Sergio Veloso; Miranda, Debora Marques; Quirino, Isabel Gomes; Leite, Barbara Gusmão L; Colosimo, Enrico Antonio; e Silva, Ana Cristina S; Martelli-Júnior, Hercílio; Oliveira, Eduardo Araujo

    2013-09-01

    To evaluate the profile and the scientific production of researchers in Pediatrics with scholarship from the National Counsel of Technological and Scientific Development. The Lattes curricula of 34 researchers in Pediatrics with active scholarships, from 2006 to 2008 were included in the analysis. The variables of interest were: gender, affiliation, time since PHD, tutoring of undergraduate students, mentorship of masters and doctors, scientific production and the papers' impact. In a total of 411 researchers in Medicine, 34 (8%) belonged to Pediatrics. Males (77%) and scholars in the category 2 of productivity (62%) prevailed. Three states of Brazil were responsible for approximately 90% of the researchers: São Paulo (53%), Minas Gerais (21%), and Rio Grande do Sul (15%). During their academic career, the Pediatrics researchers have published 3,122 articles with a median of 89 articles per researcher (interquartile range - IQ=51-119). Of the total, 40 and 59% articles were indexed in the Web of Science and Scopus databases, respectively. The Pediatrics researchers have published papers in 599 journals with a median impact factor of 2.35 (IQ=1.37-3.73) for the 323 indexed journals. The Pediatrics researchers have a relevant scientific output from the quantity point of the view, but there is a need to improve quality.

  20. The Consensus Process at the Water Science and Technology Board, National Research Council

    Science.gov (United States)

    Logan, W. S.

    2001-12-01

    Whereas the very birth of the U.S. Geological Survey arose from the recommendations of a National Academy of Sciences report, water science has not always had a prominent place at that institution. Prior to the 1980s, water issues were dealt with on an ad hoc basis by various boards related to science, engineering, and policy. With the birth of the Water Science and Technology Board (WSTB) in 1982, a diversity of water-related issues are now handled under one roof. The "business" of the WSTB is to produce consensus reports on a spectrum of topics in water science. Some of the projects that the WSTB works on are self-generated. The majority are generated either by Congress, or by government agencies. The WSTB takes on several different kinds of studies. Some of these are designed to advance the science of hydrology itself. This category would include the report Opportunities in the Hydrologic Sciences, which helped to establish hydrologic science as something separate from applied hydrology in Congress, the White House, and agencies such as NSF. However, the majority of the board's consensus studies involve hydrology in the interests of improving the natural and human environment. For example, Water for the Future: The West Bank and Gaza Strip, Israel, and Jordan outlined consensus principles backed by scientists from all of these entities for sustaining freshwater resources of the region. Closer to home, but no less controversial, a WSTB committee recently reached consensus on improving the process by which states determine which water bodies are polluted enough to require clean-up, and develop Total Maximum Daily Loads for these pollutants. Another committee recently sorted through the scientific bases for using natural attenuation for various contaminants in ground water and soil. And an ongoing committee is trying to help the South Florida scientific community to determine the best strategies for restoring the Everglades to some semblance of its former self

  1. Applying new safeguards technology to existing nuclear facilities

    International Nuclear Information System (INIS)

    Johnson, C.E.; Wagner, E.P.

    1979-01-01

    The application and operation of safeguards instrumentation in a facility containing special nuclear material is most successful when the installation is designed for the operation of the specific facility. Experience at the Idaho National Engineering Laboratory demonstrates that installation designs must consider both Safeguards and Production requirements of specific facilities. Equipment selection and installation design influenced by the training and experience of production operations and safeguards personnel at a specific facility help assure successful installation, reliable operation, and minimal operator training. This minimizes impacts on existing plant production activities while maximizing utility of the safeguards information obtained

  2. Applying new safeguards technology to existing nuclear facilities

    International Nuclear Information System (INIS)

    Harris, W.J.; Wagner, E.P.

    1979-01-01

    The application and operation of safeguards instrumentation in a facility containing special nuclear material is most successful when the installation is desinged for the operation of the specific facility. Experience at the Idaho National Engineering Laboratory demonstrates that installation designs must consider both safeguards and production requirements of specific facilities. Equipment selection and installation design influenced by the training and experience of production operations and safeguards personnel at a specific facility help assure successful installation, reliable operation, and minimal operator training. This minimizes impacts on existing plant production activities while maximizing utility of the safeguards information obtained

  3. Decree No. 89-85 of 8 February 1989 setting up a Council on Technological Risk Prevention

    International Nuclear Information System (INIS)

    1989-01-01

    The Council set up by this Decree contributes to the assessment of collective risks arising from industrial activities, in particular nuclear activities, through its opinions, recommendations, studies, and proposes the relevant preventive actions to the Government. (NEA) [fr

  4. Needs of Advanced Safeguards Technologies for Future Nuclear Fuel Cycle (FNFC) Facilities and a Trial Application of SBD Concept to Facility Design of a Hypothetical FNFC Facility

    International Nuclear Information System (INIS)

    Seya, M.; Hajima, R.; Nishimori, N.; Hayakawa, T.; Kikuzawa, N.; Shizuma, T.; Fujiwara, M.

    2010-01-01

    Some of future nuclear fuel cycle (FNFC) facilities are supposed to have the characteristic features of very large throughput of plutonium, low decontamination reprocessing (no purification process; existence of certain amount of fission products (FP) in all process material), full minor actinides (MA) recycle, and treatment of MOX with FP and MA in fuel fabrication. In addition, the following international safeguards requirements have to be taken into account for safeguards approaches of the FNFC facilities. -Application of integrated safeguards (IS) approach; -Remote (unattended) verification; - 'Safeguards by Design' (SBD) concept. These features and requirements compel us to develop advanced technologies, which are not emerged yet. In order to realize the SBD, facility designers have to know important parts of design information on advanced safeguards systems before starting the facility design. The SBD concept requires not only early start of R and D of advanced safeguards technologies (before starting preliminary design of the facility) but also interaction steps between researchers working on safeguards systems and nuclear facility designers. The interaction steps are follows. Step-1; researchers show images of advanced safeguards systems to facility designers based on their research. Step-2; facility designers take important design information on safeguards systems into process systems of demonstration (or test) facility. Step-3; demonstration and improvement of both systems based on the conceptual design. Step-4; Construction of a FNFC facility with the advanced safeguards systems We present a trial application of the SBD concept to a hypothetical FNFC facility with an advanced hybrid K-edge densitometer and a Pu NDA system for spent nuclear fuel assembly using laser Compton scattering (LCS) X-rays and γ-rays and other advanced safeguards systems. (author)

  5. Council Districts

    Data.gov (United States)

    Town of Cary, North Carolina — View the location of the Town of Cary’s four Town Council districts.Please note that one district, District A, is split into two geo-spatial areas. One area is in...

  6. Questions raised over future of UK research council

    Science.gov (United States)

    Banks, Michael

    2010-02-01

    Five senior physicists have written to the UK science minister, Lord Drayson, about the "dismal future" for researchers in the country in the wake of a £40m shortfall in the budget of the Science and Technology Facilities Council (STFC). The physicists, who chair the STFC's five advisory panels, have also called for structural reforms to be made to the council. They warn that unless the government takes action to reverse the situation, the UK will be "perceived as an untrustworthy partner in global projects" and predict that a brain drain of the best UK scientists to positions overseas will ensue.

  7. 28 June 2012 - Members of the European Brain Council led by President Mary Baker visiting the LHC tunnel at Point 5 with Technology Department Group Leader L. Bottura and CMS experimental area with Run Coordinator M. Chamizo-Llatas.

    CERN Multimedia

    Jean-Claude Gadmer

    2012-01-01

    28 June 2012 - Members of the European Brain Council led by President Mary Baker visiting the LHC tunnel at Point 5 with Technology Department Group Leader L. Bottura and CMS experimental area with Run Coordinator M. Chamizo-Llatas.

  8. Control technology for radioactive emissions to the atmosphere at US Department of Energy facilities

    Energy Technology Data Exchange (ETDEWEB)

    Moore, E.B.

    1984-10-01

    The purpose of this report is to provide information to the US Environmental Protection agency (EPA) on existing technology for the control of radionuclide emissions into the air from US Department of Energy (DOE) facilities, and to provide EPA with information on possible additional control technologies that could be used to further reduce these emissions. Included in this report are generic discussions of emission control technologies for particulates, iodine, rare gases, and tritium. Also included are specific discussions of existing emission control technologies at 25 DOE facilities. Potential additional emission control technologies are discussed for 14 of these facilities. The facilities discussed were selected by EPA on the basis of preliminary radiation pathway analyses. 170 references, 131 figures, 104 tables.

  9. Control technology for radioactive emissions to the atmosphere at US Department of Energy facilities

    International Nuclear Information System (INIS)

    Moore, E.B.

    1984-10-01

    The purpose of this report is to provide information to the US Environmental Protection agency (EPA) on existing technology for the control of radionuclide emissions into the air from US Department of Energy (DOE) facilities, and to provide EPA with information on possible additional control technologies that could be used to further reduce these emissions. Included in this report are generic discussions of emission control technologies for particulates, iodine, rare gases, and tritium. Also included are specific discussions of existing emission control technologies at 25 DOE facilities. Potential additional emission control technologies are discussed for 14 of these facilities. The facilities discussed were selected by EPA on the basis of preliminary radiation pathway analyses. 170 references, 131 figures, 104 tables

  10. Facilities & Technology: The Transformation of "Campus." APPA Thought Leaders Series 2015

    Science.gov (United States)

    APPA: Association of Higher Education Facilities Officers, 2015

    2015-01-01

    The 2015 Thought Leaders symposium focused on the topic of "Facilities & Technology: The Transformation of 'Campus.'" Educational institutions that master new technologies will have an edge in the increasingly competitive higher education landscape. This report discusses the factors related to integrating technology and the campus…

  11. Councils of Urgent Studies

    Science.gov (United States)

    Cellarius, Richard A.; Platt, John

    1972-01-01

    Discusses the role of national or international coordinating councils in focusing research on solutions of major human problems. Presents a taxonomy of 25 areas under the major heading: Physical Technology and Engineering; Biotechnology; Behavior and Personal Relations; National Social Structures; World Structure; and Channels of Effectiveness.…

  12. Development of demonstration facility design technology for advanced nuclear fuel cycle process

    International Nuclear Information System (INIS)

    Cho, Il Je; You, G. S.; Choung, W. M.; Lee, E. P.; Hong, D. H.; Lee, W. K.; Ku, J. H.; Moon, S. I.; Kwon, K. C.; Lee, K. I. and other

    2012-04-01

    PRIDE Facility, pyroprocess mock-up facility, is the first facility that is operated in inert atmosphere in the country. By using the facility, the functional requirements and validity of pyroprocess technology and facility related to the advanced fuel cycle can be verified with a low cost. Then, PRIDE will contribute to evaluate the technology viability, proliferation resistance and possibility of commercialization of the pyroprocess technology. It is essential to develop design technologies for the advanced nuclear fuel cycle demonstration facilities and complete the detailed design of PRIDE facility with capabilities of the stringent inert atmosphere control, fully remote operation which are necessary to develop the high-temperature molten salts technology. For these, it is necessary to design the essential equipment of large scale inert cell structure and the control system to maintain the inert atmosphere, and evaluate the safety. To construct the hot cell system which is appropriate for pyroprocess, some design technologies should be developed, which include safety evaluation for effective operation and maintenance, radiation safety analysis for hot cell, structural analysis, environmental evaluation, HVAC systems and electric equipment

  13. The construction technology of Chinese ancient city drainage facilities

    Science.gov (United States)

    Hequn, Li; Yufengyun

    2018-03-01

    In ancient china, according to the local natural environment, a variety of drainage facilities were built in order to excrete rainwater, domestic sewage, production wastewater and so on. These drainage facilities were mainly made of pottery, bricks, wood, stone, etc. For example, ceramic water pipelines, buried in the ground, connect together one by one, and there was a slight drop from one end to the other in favor of drainage. These measures can also be used for reference in today’s urban drainage and flood control.

  14. Application of information and communication technology facilities in ...

    African Journals Online (AJOL)

    Information Impact | Jorunal of Information and Knowledge Management

    Findings also revealed that inadequate training of staff on ICT application to technical services; poor electricity supply and insufficient fund were some of the challenges plaguing the application of ICT facilities to technical unit of the library. The study recommends that there should be adequate straining of staff, provision of ...

  15. Hong kong chemical waste treatment facilities: a technology overview

    Energy Technology Data Exchange (ETDEWEB)

    Siuwang, Chu [Enviropace Ltd., Hong Kong (Hong Kong)

    1993-12-31

    The effective management of chemical and industrial wastes represents one of the most pressing environmental problems confronting the Hong Kong community. In 1990, the Hong Kong government contracted Enviropace Limited for the design, construction and operation of a Chemical Waste Treatment Facility. The treatment and disposal processes, their integration and management are the subject of discussion in this paper

  16. Hong kong chemical waste treatment facilities: a technology overview

    Energy Technology Data Exchange (ETDEWEB)

    Siuwang, Chu [Enviropace Ltd., Hong Kong (Hong Kong)

    1994-12-31

    The effective management of chemical and industrial wastes represents one of the most pressing environmental problems confronting the Hong Kong community. In 1990, the Hong Kong government contracted Enviropace Limited for the design, construction and operation of a Chemical Waste Treatment Facility. The treatment and disposal processes, their integration and management are the subject of discussion in this paper

  17. The Mixed Waste Management Facility: Technology selection and implementation plan, Part 2, Support processes

    International Nuclear Information System (INIS)

    Streit, R.D.; Couture, S.A.

    1995-03-01

    The purpose of this document is to establish the foundation for the selection and implementation of technologies to be demonstrated in the Mixed Waste Management Facility, and to select the technologies for initial pilot-scale demonstration. Criteria are defined for judging demonstration technologies, and the framework for future technology selection is established. On the basis of these criteria, an initial suite of technologies was chosen, and the demonstration implementation scheme was developed. Part 1, previously released, addresses the selection of the primary processes. Part II addresses process support systems that are considered ''demonstration technologies.'' Other support technologies, e.g., facility off-gas, receiving and shipping, and water treatment, while part of the integrated demonstration, use best available commercial equipment and are not selected against the demonstration technology criteria

  18. Innovative technologies for recycling and reusing radioactively contaminated materials from DOE facilities

    International Nuclear Information System (INIS)

    Bossart, S.J.; Hyde, J.

    1993-01-01

    Through award of ten contracts under the solicitation, DOE is continuing efforts to develop innovative technologies for decontamination and recycling or reusing of process equipment, scrap metal, and concrete. These ten technologies are describe briefly in this report. There is great economic incentive for recycling or reusing materials generated during D ampersand D of DOE's facilities. If successfully developed, these superior technologies will enable DOE to clean its facilities by 2019. These technologies will also generate a reusable or recyclable product, while achieving D ampersand D in less time at lower cost with reduced health and safety risks to the workers, the public and the environment

  19. Periodic inspections of lightning protection systems in intermediate storage facilities of nuclear technological plants

    International Nuclear Information System (INIS)

    Witzel, Andre; Schulz, Olav

    2013-01-01

    Especially for nuclear technological plants, periodic inspections of lightning protection systems are of great importance. This article shows the sequence of maintenance programs using the examples of the intermediate storage facilities of the nuclear technological plants Grohnde and Unterweser as well as the central intermediate storage facility in Gorleben and gives a description of the extensive measures of inspecting the external and internal lightning protection and the global earth termination system.

  20. Safeguarding uranium enrichment facilities. Review and analysis of the status of safeguards technology for uranium enrichment facilities

    International Nuclear Information System (INIS)

    1977-09-01

    The objective of this paper is to examine critically the diversion potential at uranium enrichment facilities and to outline a basic safeguards strategy which counters all identified hazards as completely as possible yet with a minimum of non-essential redundancy. Where existing technology does not appear to be adequate for effective safeguards, the limitations are examined, and suggestions for further R and D effort are made. Parts of this report are generally applicable to all currently known enrichment processes, while other parts are specifically directed toward facilities based on the gas centrifuge process. It is hoped that additional sections discussing a safeguards strategy for gas diffusion facilities can be added later. It should be emphasized that this is a technical report, and does not reflect any legal positions. The safeguards strategy and subsequent inspection procedures are intended as guidelines, not as negotiating positions

  1. Technology requirements to be addressed by the NASA Lewis Research Center Cryogenic Fluid Management Facility program

    Science.gov (United States)

    Aydelott, J. C.; Rudland, R. S.

    1985-01-01

    The NASA Lewis Research Center is responsible for the planning and execution of a scientific program which will provide advance in space cryogenic fluid management technology. A number of future space missions were identified that require or could benefit from this technology. These fluid management technology needs were prioritized and a shuttle attached reuseable test bed, the cryogenic fluid management facility (CFMF), is being designed to provide the experimental data necessary for the technology development effort.

  2. From the Scientific Council of the State Science and Technology Committee on New processes in the coking and chemical industry, Coking and Chemical Products Divisions of the Science and Technological Council of the Ministry of Ferrous Metallurgy of the USSR and Central Plenum of Scientific and Technological Associations of the Ferrous Metallurgy Industry

    Energy Technology Data Exchange (ETDEWEB)

    Ermolova, V.P.

    1985-06-01

    Joint conference took place on 5-7 December 1984 in Moscow. Reports were presented on the following topics: status of implementing the union-wide scientific and technological programs on coking by-products and organizing the production of coke briquet fuel in 1984; developments in the coking and chemical industry up to the year 2000; developing a raw material base for coking up to the year 2000; state of research on thermal processing with hot coke; training engineers for the coking and chemical industry; on planning the work of the scientific council in 1985.

  3. ITER Council proceedings: 1993

    International Nuclear Information System (INIS)

    1994-01-01

    Records of the third ITER Council Meeting (IC-3), held on 21-22 April 1993, in Tokyo, Japan, and the fourth ITER Council Meeting (IC-4) held on 29 September - 1 October 1993 in San Diego, USA, are presented, giving essential information on the evolution of the ITER Engineering Design Activities (EDA), such as the text of the draft of Protocol 2 further elaborated in ''ITER EDA Agreement and Protocol 2'' (ITER EDA Documentation Series No. 5), recommendations on future work programmes: a description of technology R and D tasks; the establishment of a trust fund for the ITER EDA activities; arrangements for Visiting Home Team Personnel; the general framework for the involvement of other countries in the ITER EDA; conditions for the involvement of Canada in the Euratom Contribution to the ITER EDA; and other attachments as parts of the Records of Decision of the aforementioned ITER Council Meetings

  4. ITER council proceedings: 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    Records of the third ITER Council Meeting (IC-3), held on 21-22 April 1993, in Tokyo, Japan, and the fourth ITER Council Meeting (IC-4) held on 29 September - 1 October 1993 in San Diego, USA, are presented, giving essential information on the evolution of the ITER Engineering Design Activities (EDA), such as the text of the draft of Protocol 2 further elaborated in ``ITER EDA Agreement and Protocol 2`` (ITER EDA Documentation Series No. 5), recommendations on future work programmes: a description of technology R and D tastes; the establishment of a trust fund for the ITER EDA activities; arrangements for Visiting Home Team Personnel; the general framework for the involvement of other countries in the ITER EDA; conditions for the involvement of Canada in the Euratom Contribution to the ITER EDA; and other attachments as parts of the Records of Decision of the aforementioned ITER Council Meetings.

  5. Information and communications technology facilities at the tertiary level education in some urban universities in Bangladesh

    Directory of Open Access Journals (Sweden)

    F. M. Shahriar

    2016-07-01

    Full Text Available With the advent of digitalization, information and communications technology facilities have become an indispensable part of education especially at the universities. This study has been undertaken with dual purposes - to find the existing scenario of information and communications technology facilities and to gauge the perception of the students onthe quality of those facilities - at the universities in Bangladesh. To that end, a survey was conducted on the undergraduate and graduate students of 9 private and public universities. To assess the quality of information and communications technology services, participants’ views on various aspects like the sufficiency of computers, availability of required software, maintenance and troubleshooting, internet and data sharing facilities, etc. were collected and analyzed. The study finds that although students are on the happier side with the information and communications technology installations and equipment, they are fairly unhappy about the maintenance services and internet facilities available at their universities. It gives some valuable insights about the information and communications technology facilities scenario at the universities that can be taken into consideration while planning future action plan and development of information and communications technology at the universities in Bangladesh.

  6. Operation technology of air treatment system in nuclear facilities

    CERN Document Server

    Chun, Y B; Hwong, Y H; Lee, H K; Min, D K; Park, K J; Uom, S H; Yang, S Y

    2001-01-01

    Effective operation techniques were reviewed on the air treatment system to protect the personnel in nuclear facilities from the contamination of radio-active particles and to keep the environment clear. Nuclear air treatment system consisted of the ventilation and filtering system was characterized by some test. Measurement of air velocity of blowing/exhaust fan in the ventilation system, leak tests of HEPA filters in the filtering, and measurement of pressure difference between the areas defined by radiation level were conducted. The results acquired form the measurements were reflected directly for the operation of air treatment. In the abnormal state of virus parts of devices composted of the system, the repairing method, maintenance and performance test were also employed in operating effectively the air treatment system. These measuring results and techniques can be available to the operation of air treatment system of PIEF as well as the other nuclear facilities in KAERI.

  7. Radiation facilities and irradiation technology for food irradiation

    International Nuclear Information System (INIS)

    Sunaga, Hiromi

    2005-01-01

    Progress made during these 30 years in the field of radiation treatment of food is reviewed by describing features of the process including elementary processes, quality control of the products and the dosimetric techniques widely employed. The Co-60 gamma-ray irradiation facilities to be used for radiation-sterilization of medical supplies and food preservation are presented. For electron beam irradiation, accelerators for processing with the energy from 0.3 to 10 MeV are generally employed. The electron-guns, the method of acceleration such as rectification, types of acceleration as Cockcroft-Walton, dynamitron, or linear acceleration and X-ray producing facility, with various countermeasures for safety management, are briefly explained. The concepts of dose and traceability are given. The dosimeters including reference dosimeter and routine ones with validation are explained. (S. Ohno)

  8. The technological safety in facilities that manage radioactive sources

    International Nuclear Information System (INIS)

    Lizcano, D.

    2014-10-01

    The sealed radioactive sources are used inside a wide range of applications in the medicine, industry and investigation around the world. These sources can contain a great radionuclides variety, exhibiting a wide spectrum of activities and radiological half lives. This way, we can find pattern sources of radionuclides as Americium-241, Plutonium-238, Plutonium-239, Thorium-228 and Thorium-230, etc., with some activity of kBq in research laboratories, Iridium-192 and Cesium-137 sources used in brachytherapy with GBq activities, until sources with P Bq activities in industrial irradiators of Cobalt-60 and Cesium-137. This document approach the physical safety that entities like the IAEA recommends for the facilities that contain sealed sources, especially the measures that are taking in the Instituto Nacional de Investigaciones Nucleares (ININ) and others government facilities. (Author)

  9. Hewitt launches Research Councils UK

    CERN Multimedia

    2002-01-01

    "Trade and Industry Secretary Patricia Hewitt today launched 'Research Councils UK' - a new strategic partnership that will champion research in science, engineering and technology across the UK" (1 page).

  10. Proceedings of the 9. National Seminar on Technology and Safety of Nuclear Power Plants and Nuclear Facilities

    International Nuclear Information System (INIS)

    Antariksawan, Anhar R.; Soetrisnanto, Arnold Y; Aziz, Ferhat; Untoro, Pudji; Su'ud, Zaki; Zarkasi, Amin Santoso; Lasman, As Natio

    2003-08-01

    The ninth proceedings of seminar safety and technology of nuclear power plant and nuclear facilities held by National Nuclear Energy Agency and PLN-JTK. The aims of seminar is to exchange and disseminate information about Safety and Nuclear Power Plant Technology and Nuclear Facilities consist of Technology High Temperature Reactor and Application for National Development Sustainable and High Technology. This seminar cover all aspects Technology, Power Reactor, Research Reactor High Temperature Reactor and Nuclear Facilities. There are 20 articles have separated index

  11. Council Session

    CERN Multimedia

    CERN PhotoLab

    1977-01-01

    From face, 1st raw: Erich Lohrmann, Sergio Fubini, Léon Van Hove, John Adams (Directors-General), Paul Levaux (President of the Council) Hans-Otto Wüster, Franco Bonaudi, Robert Lévy-Mandel and 2nd raw, centre: Patrick Mollet, Eliane de Modzelewska, Jean-Marie Dufour

  12. [Technology transfer to the facility for production of medicines].

    Science.gov (United States)

    Beregovykh, V V; Spitskiĭ, O P

    2013-01-01

    Innovation development of pharmaceutical industry is close connected to knowledge transfer going to each subsequent life cycle phase of medicinal product. Formal regulation of technology and knowledge transfer is essential for achievement high quality during production of medicines designed during development phase. Conceptual tools, approaches and requirements are considered that are necessary for knowledge and technology transfer across all the life cycle phases of medicines. They are based on scientific knowledge of medicinal products and take into account both international and Russian regulations in the area of development, production and distribution of medicines. Importance of taking into consideration all aspects related to quality of medicines in all steps of technology transfer is shown. An approach is described for technology transfer organization for Russian pharmaceutical manufacturers based on international guides in this area.

  13. Conceptual design of a technology development facility (TDF)

    International Nuclear Information System (INIS)

    Doggett, J.N.; Damm, C.C.

    1981-01-01

    We have developed a concept for employing a single-cell mirror machine in a facility for testing and developing fusion reactor materials, components, and subsystems in a fusion reactor environment. Our approach is similar to that of the 1974 FERF study, except that we have added an auxiliary thermal-barrier cell at each end of the yin-yang magnet. In this way, we provide for plasma microstability by confining a warm plasma component between potential peaks at each end of the device (just as in the tandem mirror with auxiliary barrier cells) while we further improve confinement by the inherent reduction in ambipolar potential drop in the central cell

  14. A singular facility scientific technological to promote the hydrogen economy

    International Nuclear Information System (INIS)

    Montes, M.

    2010-01-01

    Declining fossil fuel reserves raises concerns about new energy resources that will lead to energy systems based on distributed generation and active distribution systems that require new energy storage systems. Hydrogen is a good candidate to operate as storage and as energy carrier that still needs scientific and technological breakthroughs to facilitate their integration into this new energy culture. Spain has supported numerous public-private cooperative efforts that have culminated in the creation of the National Center for Hydrogen Technology Experiment and Fuel Cells. (Author)

  15. METHODOLOGY-TECHNOLOGICAL BASES AND COMMUNICATION FACILITIES OF COMMUNICATION IN DISTANCE LEARNING

    OpenAIRE

    O. Gnedkova; V. Lyakutin

    2010-01-01

    In this article methodical and technological principles of communication process in distance learning, which are the important constituents of the effective distance course, are analyzed. Communication facilities for the conducting communication process in distance learning are examined. Recommendations for teachers (tutors) for organization of successful and effective learning process with the use of modern communication technologies are pointed.

  16. State-of-the-art WEB -technologies and ecological safety of nuclear power engineering facilities

    International Nuclear Information System (INIS)

    Batij, V.G.; Batij, E.V.; Rud'ko, V.M.; Kotlyarov, V.T.

    2004-01-01

    Prospects of web-technologies using in the field of improvement radiation safety level of nuclear power engineering facilities is seen. It is shown that application of such technologies will enable entirely using the data of all information systems of radiation control

  17. Development programs on decommissioning technology for reactors and fuel cycle facilities in Japan

    International Nuclear Information System (INIS)

    Fujiki, K.

    1992-01-01

    The Science and Technology Agency (STA) of Japan is promoting technology development for decommissioning of nuclear facilities by entrusting various research programs to concerned research organisations: JAERI, PNC and RANDEC, including first full scale reactor decommissioning of JPDR. According to the results of these programs, significant improvement on dismantling techniques, decontamination, measurement etc. has been achieved. Further development of advanced decommissioning technology has been started in order to achieve reduction of duration of decommissioning work and occupational exposures in consideration of the decommissioning of reactors and fuel cycle facilities. (author) 5 refs.; 7 figs.; 1 tab

  18. Council Chamber exhibition

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    To complete the revamp of CERN’s Council Chamber, a new exhibition is being installed just in time for the June Council meetings.   Panels will showcase highlights of CERN’s history, using some of the content prepared for the exhibitions marking 50 years of the PS, which were displayed in the main building last November. The previous photo exhibition in the Council Chamber stopped at the 1970s. To avoid the new panels becoming quickly out of date, photos are grouped together around specific infrastructures, rather than following a classic time-line. “We have put the focus on the accelerators – the world-class facilities that CERN has been offering researchers over the years, from the well-known large colliders to the lesser-known smaller facilities,” says Emma Sanders, who worked on the content. The new exhibition will be featured in a future issue of the Bulletin with photos and an interview with Fabienne Marcastel, designer of the exhibit...

  19. Council dinner

    CERN Multimedia

    1980-01-01

    Jean Teillac (President of the Council) gives the speech. The occasion was the end-of-term of Leon Van Hove and John Adams as Research and Executive Director-General, respectively, to be succeeded by Herwig Schopper. The venue was the Hotel Beau-Rivage in Geneva. Beside Jean Teillac are (on the left) G.H. Stafford and Mme Van Hove, (on the right) Mme Schopper.

  20. 78 FR 45992 - National Science and Technology Council; Notice of Meeting: Open Meeting of the National Science...

    Science.gov (United States)

    2013-07-30

    ..., Engineering, and Technology Subcommittee National Nanotechnology Coordination Office ACTION: Notice of public meeting. SUMMARY: The National Nanotechnology Coordination Office (NNCO), on behalf of the Nanoscale Science, Engineering, and Technology (NSET) Subcommittee of the Committee on Technology, National Science...

  1. Primary health care facility infrastructure and services and the ...

    African Journals Online (AJOL)

    ... Research Council ae Currently from Cape Peninsula University of Technology ... Keywords: primary health care facilities; nutritional status; children; caregivers' rural; South Africa ... underlying causes of malnutrition in children, while poor food quality, .... Information on PHC facility infrastructure and services was obtained.

  2. Problems of new processes in coking industry discussed at the Scientific Council of the GKNT and the Section of Coking Industry of the Scientific and Technological Council of the Ministry of Iron and Steel Industry of the USSR

    Energy Technology Data Exchange (ETDEWEB)

    Ermolova, V.P.

    1983-03-01

    A report is given from the conference on new processes in the Soviet coking industry held in Moscow on 28-29 October 1982. The following papers were delivered: implementing research programs on new coking processes, new trends in coking plant design and construction in the 11th 5 year plan and in the time period until 1990, increasing efficiency of coking industry, research program of the Scientific Council in 1983. The report concentrates on new trends in coking plant design. Considering that the raw material basis of the Eastern regions of the USSR is poor in high quality coking coal the new coking processes and technologies should use weakly coking coal. The following schemes are discussed: heat treatments (especially useful in the case of black coal from the Kuzbass characterized by intensive fluctuations of petrology), selective crushing (schemes developed by the VUKhIN Institute), partial briquetting of coal mixtures (experiments carried out by the UKhIN in the Donbass in 1982). Other problems of coking such as development of new systems of smokeless fuel feeding to coke ovens, dry coke quenching, increasing capacity of coke chambers to 41.6 m/sup 3/, environmental protection in coking industry and production of special coke types from poor quality coal for metallurgy are also described.

  3. Development of Design Concept and Applied Technology for RCP Performance Test Facility

    International Nuclear Information System (INIS)

    Park, Sang Jin; Lee, Jung Ho; Yoon, Seok Ho

    2010-02-01

    Performance test facility for RCP (reactor coolant pump) is essential to verify the performance and reliability of RCP before installation in the nuclear power plant. The development of RCP for new-type reactor and the performance verification of hydraulic revolving body also needs the RCP test facility. The design concept of test loop and the technology of flow rate measurement are investigated in this research

  4. The development of robot application technology in nuclear facilities

    International Nuclear Information System (INIS)

    Lee, Jong Min; Kim, Seung Ho; Kim, Chang Hoi; Kim, Byung Soo; Hwang, Suk Young; Sohn, Surg Won; Lee, Yong Bum; Kim, Woong Ki

    1991-01-01

    The project of this study is intended to develop the application technology for autonomous robotic systems operated in hostile environments where human access is prohibited. The mobile robot, named as KAEROT, has been designed by adopting the controller of multiprocessor of distributed system architecture in order to get flexibility. 2 driving wheel assembles and 1 steering mechanism has been adopted and each of them is made of planetary wheel which is composed of a couple of star-like arms with 3 wheels. The 6 D.O.F of manipulator is controlled by CCD camera mounted on the elbow and base, to provide wide view of the working area for tele-operation. The off-line programming system is being developed for checking robot constraint violations within workspace prior to execution of robot programming. (Author)

  5. Specific factors influencing information system/information and communication technology sourcing strategies in healthcare facilities.

    Science.gov (United States)

    Potančok, Martin; Voříšek, Jiří

    2016-09-01

    Healthcare facilities use a number of information system/information and communication technologies. Each healthcare facility faces a need to choose sourcing strategies most suitable to ensure provision of information system/information and communication technology services, processes and resources. Currently, it is possible to observe an expansion of sourcing possibilities in healthcare informatics, which creates new requirements for sourcing strategies. Thus, the aim of this article is to identify factors influencing information system/information and communication technology sourcing strategies in healthcare facilities. The identification was based on qualitative research, namely, a case study. This study provides a set of internal and external factors with their impact levels. The findings also show that not enough attention is paid to these factors during decision-making. © The Author(s) 2015.

  6. Report from Council

    CERN Document Server

    2015-01-01

    This week’s Council meeting was dominated by discussions about the long-term, sustainable future of CERN. Key points are progress on the Medium-Term Plan, the successful LHC restart, and enlargement.   The budget proposed by management for 2016 was well received, as were the measures to mitigate against the recent change in exchange rates. These items will be put to the vote in September. Discussions on CERN staff employment conditions were conducted in a constructive atmosphere this week, and will continue in future Council meetings. The Council also clearly voiced its congratulations for the smooth and successful start of LHC run 2, coming on top of a clear run of spectacular scientific and technological successes over recent years. In the current climate of austerity, these developments are a strong endorsement from the Council. Nevertheless, it would be disingenuous of me to pretend that everything is rosy. There has been an air of unease at CERN over recent months, which was v...

  7. Test facilities for radioactive material transport packages (AEA Technology plc, Winfrith,UK)

    International Nuclear Information System (INIS)

    Gillard, J.E.

    2001-01-01

    Transport containers for radioactive materials are tested to demonstrate compliance with national and international standards. Transport package design, testing, assessment and approval requires a wide range of skills and facilities. The comprehensive capability of AEA Technology in these areas is described. The facilities described include drop-test cranes and targets (up to 700 tonne); pool fires, furnaces and rigs for thermal tests, including heat dissipation on prototype flasks; shielding facilities; criticality simulations and leak test techniques. These are illustrated with photographs demonstrating the comprehensive nature of package testing services supplied to customers. (author)

  8. Test facilities for radioactive material transport packages (AEA Technology plc, Winfrith,UK)

    Energy Technology Data Exchange (ETDEWEB)

    Gillard, J.E

    2001-07-01

    Transport containers for radioactive materials are tested to demonstrate compliance with national and international standards. Transport package design, testing, assessment and approval requires a wide range of skills and facilities. The comprehensive capability of AEA Technology in these areas is described. The facilities described include drop-test cranes and targets (up to 700 tonne); pool fires, furnaces and rigs for thermal tests, including heat dissipation on prototype flasks; shielding facilities; criticality simulations and leak test techniques. These are illustrated with photographs demonstrating the comprehensive nature of package testing services supplied to customers. (author)

  9. IFMIF (International Fusion Materials Irradiation Facility) key element technology phase interim report

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Hiroo; Ida, Mizuho; Sugimoto, Masayoshi; Takeuchi, Hiroshi; Yutani, Toshiaki (eds.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2002-03-01

    Activities of International Fusion Materials Irradiation Facility (IFMIF) have been performed under an IEA collaboration since 1995. IFMIF is an accelerator-based deuteron (D{sup +})-lithium (Li) neutron source designed to produce an intense neutron field (2 MW/m{sup 2}, 20 dpa/year for Fe) in a volume of 500 cm{sup 3} for testing candidate fusion materials. In 2000, a 3 year Key Element technology Phase (KEP) of IFMIF was started to reduce the key technology risk factors. This interim report summarizes the KEP activities until mid 2001 in the major project work-breakdown areas of accelerator, target, test facilities and design integration. (author)

  10. Air pollution control systems and technologies for waste-to-energy facilities

    International Nuclear Information System (INIS)

    Getz, N.P.; Amos, C.K. Jr.; Siebert, P.C.

    1991-01-01

    One of the primary topics of concern to those planning, developing, and operating waste-to-energy (W-T-E) [also known as municipal waste combustors (MWCs)] facilities is air emissions. This paper presents a description of the state-of-the-art air pollution control (APC) systems and technology for particulate, heavy metals, organics, and acid gases control for W-T-E facilities. Items covered include regulations, guidelines, and control techniques as applied in the W-T-E industry. Available APC technologies are viewed in detail on the basis of their potential removal efficiencies, design considerations, operations, and maintenance costs

  11. IFMIF (International Fusion Materials Irradiation Facility) key element technology phase interim report

    International Nuclear Information System (INIS)

    Nakamura, Hiroo; Ida, Mizuho; Sugimoto, Masayoshi; Takeuchi, Hiroshi; Yutani, Toshiaki

    2002-03-01

    Activities of International Fusion Materials Irradiation Facility (IFMIF) have been performed under an IEA collaboration since 1995. IFMIF is an accelerator-based deuteron (D + )-lithium (Li) neutron source designed to produce an intense neutron field (2 MW/m 2 , 20 dpa/year for Fe) in a volume of 500 cm 3 for testing candidate fusion materials. In 2000, a 3 year Key Element technology Phase (KEP) of IFMIF was started to reduce the key technology risk factors. This interim report summarizes the KEP activities until mid 2001 in the major project work-breakdown areas of accelerator, target, test facilities and design integration. (author)

  12. Evaluation and Selection of Renewable Energy Technologies for Highway Maintenance Facilities

    Science.gov (United States)

    Andrews, Taylor

    The interest in renewable energy has been increasing in recent years as attempts to reduce energy costs as well the consumption of fossil fuels are becoming more common. Companies and organizations are recognizing the increasing reliance on limited fossil fuels' resources, and as competition and costs for these resources grow, alternative solutions are becoming more appealing. Many federally run buildings and associations also have the added pressure of meeting the mandates of federal energy policies that dictate specific savings or reductions. Federal highway maintenance facilities run by the Department of Transportation fall into this category. To help meet energy saving goals, an investigation into potential renewable energy technologies was completed for the Ohio Department of Transportation. This research examined several types of renewable energy technologies and the major factors that affect their performance and evaluated their potential for implementation at highway maintenance facilities. Facilities energy usage data were provided, and a facility survey and site visits were completed to enhance the evaluation of technologies and the suitability for specific projects. Findings and technology recommendations were presented in the form of selection matrices, which were designed to help make selections in future projects. The benefits of utilization of other tools such as analysis software and life cycle assessments were also highlighted. These selection tools were designed to be helpful guides when beginning the pursuit of a renewable energy technology for highway maintenance facilities, and can be applied to other similar building types and projects. This document further discusses the research strategies and findings as well as the recommendations that were made to the personnel overseeing Ohio's highway maintenance facilities.

  13. Facilities for technology testing of ITER divertor concepts, models, and prototypes in a plasma environment

    International Nuclear Information System (INIS)

    Cohen, S.A.

    1991-12-01

    The exhaust of power and fusion-reaction products from ITER plasma are critical physics and technology issues from performance, safety, and reliability perspectives. Because of inadequate pulse length, fluence, flux, scrape-off layer plasma temperature and density, and other parameters, the present generation of tokamaks, linear plasma devices, or energetic beam facilities are unable to perform adequate technology testing of divertor components, though they are essential contributors to many physics issues such as edge-plasma transport and disruption effects and control. This Technical Requirements Documents presents a description of the capabilities and parameters divertor test facilities should have to perform accelerated life testing on predominantly technological divertor issues such as basic divertor concepts, heat load limits, thermal fatigue, tritium inventory and erosion/redeposition. The cost effectiveness of such divertor technology testing is also discussed

  14. Cost (non)-recovery by platform technology facilities in the Bio21 Cluster.

    Science.gov (United States)

    Gibbs, Gerard; Clark, Stella; Quinn, Julieanne; Gleeson, Mary Joy

    2010-04-01

    Platform technologies (PT) are techniques or tools that enable a range of scientific investigations and are critical to today's advanced technology research environment. Once installed, they require specialized staff for their operations, who in turn, provide expertise to researchers in designing appropriate experiments. Through this pipeline, research outputs are raised to the benefit of the researcher and the host institution. Platform facilities provide access to instrumentation and expertise for a wide range of users beyond the host institution, including other academic and industry users. To maximize the return on these substantial public investments, this wider access needs to be supported. The question of support and the mechanisms through which this occurs need to be established based on a greater understanding of how PT facilities operate. This investigation was aimed at understanding if and how platform facilities across the Bio21 Cluster meet operating costs. Our investigation found: 74% of platforms surveyed do not recover 100% of direct operating costs and are heavily subsidized by their home institution, which has a vested interest in maintaining the technology platform; platform managers play a major role in establishing the costs and pricing of the facility, normally in a collaborative process with a management committee or institutional accountant; and most facilities have a three-tier pricing structure recognizing internal academic, external academic, and commercial clients.

  15. Engineering and technology in the deconstruction of nuclear materials production facilities

    International Nuclear Information System (INIS)

    Kingsley, R.S.; Reynolds, W.E.; Heffner, D.C.

    1996-01-01

    Technology and equipment exist to support nuclear facility deactivation, decontamination, and decommissioning. In reality, this statement is not surprising because the nuclear industry has been decontaminating and decommissioning production plants for decades as new generations of production technology were introduced. Since the 1950s, the Babcock and Wilcox Company (B ampersand W) has operated a number of nuclear materials processing facilities to manufacture nuclear fuel for the commercial power industry and the U.S. Navy. These manufacturing facilities included a mixed oxide (PuO 2 -UO 2 ) nuclear fuel manufacturing plant, low- and high-enriched uranium (HEU/LEU) chemical and fuel plants, and fuel assembly plants. In addition, B ampersand W designed and build a major nuclear research center in Lynchburg, Virginia, to support these nuclear fuel manufacturing activities and to conduct nuclear power research. These nuclear research facilities included two research reactors, a hot-cell complex for nuclear materials research, four critical experiment facilities, and a plutonium fuels research and development facility. This article describes the B ampersand W deactivation, decomtanimation, and decommisioning program

  16. New Prototype Safeguards Technology Offers Improved Confidence and Automation for Uranium Enrichment Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Brim, Cornelia P.

    2013-04-01

    An important requirement for the international safeguards community is the ability to determine the enrichment level of uranium in gas centrifuge enrichment plants and nuclear fuel fabrication facilities. This is essential to ensure that countries with nuclear nonproliferation commitments, such as States Party to the Nuclear Nonproliferation Treaty, are adhering to their obligations. However, current technologies to verify the uranium enrichment level in gas centrifuge enrichment plants or nuclear fuel fabrication facilities are technically challenging and resource-intensive. NNSA’s Office of Nonproliferation and International Security (NIS) supports the development, testing, and evaluation of future systems that will strengthen and sustain U.S. safeguards and security capabilities—in this case, by automating the monitoring of uranium enrichment in the entire inventory of a fuel fabrication facility. One such system is HEVA—hybrid enrichment verification array. This prototype was developed to provide an automated, nondestructive assay verification technology for uranium hexafluoride (UF6) cylinders at enrichment plants.

  17. Test facilities for radioactive material transport packages (AEA Technology, Winfrith, UK)

    International Nuclear Information System (INIS)

    Burgess, M.H.

    1991-01-01

    Transport packages for radioactive materials are tested to demonstrate compliance with national and international regulations. The involvement of AEA Technology is traced from the establishment of the early IAEA Regulations. Transport package design, testing, assessment and approval requires a wide variety of skills and facilities. The comprehensive capability of AEA Technology in these areas is described with references to practical experience in the form of a short bibliography. The facilities described include drop-test cranes and targets (up to 700te); air guns for impacts up to sonic velocities; pool fires, furnaces and rigs for thermal tests including heat dissipation on prototype flasks; shielding facilities and instruments; criticality simulations and leak test instruments. These are illustrated with photographs demonstrating the comprehensive nature of package testing services supplied to customers. (author)

  18. Best Available Technology (BAT) guidance for radiological liquid effluents at US Department of Energy Facilities

    International Nuclear Information System (INIS)

    Wallo, A. III; Peterson, H.T. Jr.; Ikenberry, T.A.; Baker, R.E.

    1993-01-01

    The US Department of Energy (DOE), in DOE Order 5400.5 (1990), directs operators of DOE facilities to apply the Best Available Technology (BAT) to control radiological liquid effluents from these facilities when specific conditions are present. DOE has published interim guidance to assist facility operators in knowing when a BAT analysis is needed and how such an analysis should be performed and documented. The purpose of the guidance is to provide a uniform basis in determining BAT throughout DOE and to assist in evaluating BAT determinations during programmatic audits. The BAT analysis process involves characterizing the effluent source; identifying and selecting candidate control technologies; evaluating the potential environmental, operational, resource, and economic impacts of the control technologies; developing an evaluation matrix for comparing the technologies; selecting the BAT; and documenting the evaluation process. The BAT analysis process provides a basis for consistent evaluation of liquid effluent releases, yet allows an individual site or facility the flexibility to address site-specific issues or concerns in the most appropriate manner

  19. Spanish Minister of Science and Technology visits the LHC magnet test facility

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    H.E. Mr Josep Piqué i Camps, Minister for Science and Technology, Spain, toured the test facility for LHC magnets in building SM18 during his visit to CERN in November. Photos 01, 02: Felix Rodriguez Mateos (right) explains some of a cryomagnet's myriad connections to the Minister.

  20. Spanish Minister of Science and Technology visits the LHC magnet test facility

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    H.E. Mr Josep Piqué i Camps, Minister for Science and Technology, Spain, toured the test facility for LHC magnets in building SM18 during his visit to CERN in November. Photo 01: The Minister (left) with M. Cerrada and G. Babé.

  1. Nuclear engineering experiments at experimental facilities of JNC in graduate course of Tokyo Institute of Technology

    International Nuclear Information System (INIS)

    Hayashizaki, Noriyosu; Takahashi, Minoru; Aoyama, Takafumi; Onose, Shoji

    2005-01-01

    Nuclear engineering experiments using outside facilities of the campus have been offered for graduate students in the nuclear engineering course in Tokyo Institute of Technology (Tokyo Tech.). The experiments are managed with the collaboration of Japan Nuclear Cycle Development Institute (JNC), Japan Atomic Energy Research Institute (JAERI) and Research Reactor Institute, Kyoto University (KUR). This report presents the new curriculum of the nuclear engineering experiments at JNC since 2002. The change is due to the shutdown of Deuterium Criticality Assembly Facility (DCA) that was used as an experimental facility until 2001. Reactor physics experiment using the training simulator of the experimental fast reactor JOYO is continued from the previous curriculum with the addition of the criticality approach experiment and control rods calibration. A new experimental subject is an irradiated material experiment at the Material Monitoring Facility (MMF). As a result, both are acceptable as the student experiments on the fast reactor. (author)

  2. Radioactive waste package assay facility. Volume 1. Application of assay technology

    International Nuclear Information System (INIS)

    Findlay, D.J.S.; Green, T.H.; Molesworth, T.V.; Staniforth, D.; Strachan, N.R.; Rogers, J.D.; Wise, M.O.; Forrest, K.R.

    1992-01-01

    This report, in three volumes, covers the work carried out by Taylor Woodrow Construction Ltd., and two major sub-contractors: Harwell Laboratory (AEA Technology) and Siemens Plessey Controls Ltd., on the development of a radioactive waste package assay facility, for cemented 500 litre intermediate level waste drums. In volume 1, the reasons for assay are considered together with the various techniques that can be used, and the information that can be obtained. The practical problems associated with the use of the various techniques in an integrated assay facility are identified, and the key parameters defined. Engineering and operational features are examined and provisional designs proposed for facilities at three throughput levels: 15,000, 750 and 30 drums per year respectively. The capital and operating costs for such facilities have been estimated. A number of recommendations are made for further work. 16 refs., 14 figs., 13 tabs

  3. Technology, socio-political acceptance, and the low-level radioactive waste disposal facility

    International Nuclear Information System (INIS)

    Andrews, L.J.; Domenech, J.S.

    1986-01-01

    The technology which is required to develop and operate low-level radioactive waste disposal sites in the 1990's is available today. The push for best available technology is a response to the political difficulties in securing public acceptance of the site selection process. Advances in waste management technologies include development of High Integrity Containers (HIC), solidification media, liquid volume reduction techniques using GEODE/sub sm/ and DeVoe-Holbein technology of selective removal of target radioisotopes, and CASTOR V storage casks. Advances in technology alone, however, do not make the site selection process easier and without socio-political acceptance there may be no process at all. Chem-Nuclear has been successful in achieving community acceptance at the Barnwell facility and elsewhere. For example, last June in Fall River County, South Dakota, citizens voted almost 2:1 to support the development of a low-level radioactive waste disposal facility. In Edgemont, the city nearest the proposed site, 85% of the voters were in favor of the proposed facility

  4. Overview of established and emerging treatment technologies for polycyclic aromatic hydrocarbons at wood preserving facilities

    International Nuclear Information System (INIS)

    Shearon, M.D.

    1992-01-01

    The contamination of soil and groundwater by polycyclic aromatic hydrocarbons (PAHs) is common to wood preserving facilities and manufactured gas plants. Since the inception of RCRA and CERCLA, much attention has been focused upon the remediation of both active and defunct wood preserving facilities. The experiences gleaned from the use of proven technologies, and more importantly, the lessons being learned in the trials of emerging technologies on creosote-derived PAH clean-ups at wood preserving sites, should have direct bearing on the clean-up of similar contaminants at MGP sites. In this paper, a review of several remedial actions using waste removal/disposal, on-site incineration, and bioremediation will be presented. Additionally, emerging technologies for the treatment of PAH-contaminated soil and water will be reviewed. Lastly, recent information on risk assessment results for creosote sites and treated PAH waste will be discussed

  5. Decision of the Council of State on the general regulations for the safety of a disposal facility for reactor waste (398/91)

    International Nuclear Information System (INIS)

    1991-01-01

    These Regulations contain provisions for the safe planning, construction and use of final radioactive waste storage facilities. Licensees with a waste management obligation are responsible for ensuring the safety of such facilities. The Regulations entered into force on 1 March 1991. (NEA)

  6. Proceedings of the theme meeting on the journey of BARC Safety Council for strengthening safety culture in BARC facilities: 2000-2017

    International Nuclear Information System (INIS)

    Jayarajan, K.; Jolly, V.M.

    2017-07-01

    The book has about one hundred articles, written by the regulators and the authorities of the facilities and projects of BARC. The articles are organised into four parts. Part-I gives an overview of the history of safety regulation in BARC and the details of BARC Safety Framework. Part-II of the book has articles about the facilities and projects of BARC, for which BSC had issued of regulatory consents. The facility-specific articles, written by the concerned project/facility authorities, emphasis safety aspects of the facilities and the regulatory processes they had undergone. This part is divided into seven sections, based on the broad category of facility. Experts in the concerned areas have written general articles on each category of facility. The Part-III consists of the work carried out by the specialised committees, which are under the purview of BSC. Some of the other regulatory activities of BSC are summarised in Part-IV of this book. In addition to safety and regulatory activities of BSC, the book contains the details of the major facilities and upcoming projects of BARC. Papers relevant to INIS are indexed separately

  7. Process cost and facility considerations in the selection of primary cell culture clarification technology.

    Science.gov (United States)

    Felo, Michael; Christensen, Brandon; Higgins, John

    2013-01-01

    The bioreactor volume delineating the selection of primary clarification technology is not always easily defined. Development of a commercial scale process for the manufacture of therapeutic proteins requires scale-up from a few liters to thousands of liters. While the separation techniques used for protein purification are largely conserved across scales, the separation techniques for primary cell culture clarification vary with scale. Process models were developed to compare monoclonal antibody production costs using two cell culture clarification technologies. One process model was created for cell culture clarification by disc stack centrifugation with depth filtration. A second process model was created for clarification by multi-stage depth filtration. Analyses were performed to examine the influence of bioreactor volume, product titer, depth filter capacity, and facility utilization on overall operating costs. At bioreactor volumes 5,000 L, clarification using centrifugation followed by depth filtration offers significant cost savings. For bioreactor volumes of ∼ 2,000 L, clarification costs are similar between depth filtration and centrifugation. At this scale, factors including facility utilization, available capital, ease of process development, implementation timelines, and process performance characterization play an important role in clarification technology selection. In the case study presented, a multi-product facility selected multi-stage depth filtration for cell culture clarification at the 500 and 2,000 L scales of operation. Facility implementation timelines, process development activities, equipment commissioning and validation, scale-up effects, and process robustness are examined. © 2013 American Institute of Chemical Engineers.

  8. Mixed and low-level waste treatment facility project. Volume 3, Waste treatment technologies (Draft)

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-01

    The technology information provided in this report is only the first step toward the identification and selection of process systems that may be recommended for a proposed mixed and low-level waste treatment facility. More specific information on each technology will be required to conduct the system and equipment tradeoff studies that will follow these preengineering studies. For example, capacity, maintainability, reliability, cost, applicability to specific waste streams, and technology availability must be further defined. This report does not currently contain all needed information; however, all major technologies considered to be potentially applicable to the treatment of mixed and low-level waste are identified and described herein. Future reports will seek to improve the depth of information on technologies.

  9. Shuttle Laser Technology Experiment Facility (LTEF)-to-airplane lasercom experiment: Airplane considerations

    Science.gov (United States)

    Kalil, Ford

    1990-01-01

    NASA is considering the use of various airplanes for a Shuttle Laser Technology Experiment Facility (LTEF)-to-Airplane laser communications experiment. As supporting documentation, pertinent technical details are included about the potential use of airplanes located at Ames Research Center and Wallops Flight Facility. The effects and application of orbital mechanics considerations are also presented, including slant range, azimuth, elevation, and time. The pros and cons of an airplane equipped with a side port with a bubble window versus a top port with a dome are discussed.

  10. Scientific and Technological Facilities in CIEMAT; Informe sobre Instalaciones del CIEMAT

    Energy Technology Data Exchange (ETDEWEB)

    Vaquero Ortiz, E. M.; Cascante Díaz, E.; González Pineda, L. M.

    2015-07-01

    The precise knowledge of the available Resources in an Organization, regardless the work it carries out, is an essential strategic enabler to achieve its goals. Material Resources are part of the resources in an organization, The “Material Resources” expression includes a wide span of elements, because a Material Resource, as a generic concept, is each and every specific physical mean, utilized to get any of the Organization objectives. In CIEMAT, as Public Research Agency, its Material Resources consist of its scientific and technological facilities. These resources are the basis of this Agency numerous amount of technical capabilities, allowing it to carry out its research, development and innovation activity to transfer its results to the society later. This report is a summary on CIEMAT scientific and technological facilities, whose spread can help to show its scientific and technological capabilities, to enable the execution of a wide variety of projects and to open new external cooperation channels. Outstanding among these facilities are two “Unique Scientific and Technological Infrastructures” (ICTS) and the Ionizing Radiations Metrology Laboratory (LMRI) which is the Spanish National Standards Laboratory for ionising radiations.

  11. The development of application technology for image processing in nuclear facilities

    International Nuclear Information System (INIS)

    Lee, Jong Min; Lee, Yong Bum; Kim, Woog Ki; Sohn, Surg Won; Kim, Seung Ho; Hwang, Suk Yeoung; Kim, Byung Soo

    1991-01-01

    The object of this project is to develop application technology of image processing in nuclear facilities where image signal are used for reliability and safety enhancement of operation, radiation exposure reduce of operator, and automation of operation processing. We has studied such application technology for image processing in nuclear facilities as non-tactile measurement, remote and automatic inspection, remote control, and enhanced analysis of visual information. On these bases, automation system and real-time image processing system are developed. Nuclear power consists in over 50% share of electic power supply of our country nowdays. So, it is required of technological support for top-notch technology in nuclear industry and its related fields. Especially, it is indispensable for image processing technology to enhance the reliabilty and safety of operation, to automate the process in a place like a nuclear power plant and radioactive envionment. It is important that image processing technology is linked to a nuclear engineering, and enhance the reliability abd safety of nuclear operation, as well as decrease the dose rate. (Author)

  12. Research councils facing new science and technology : the case of nanotechnology in Finland, the Netherlands, Norway and Switzerland

    NARCIS (Netherlands)

    van der Most, F.V.

    2009-01-01

    This thesis investigates how research funding organizations (RFOs) respond to a new emerging field of science and technology. It takes nanoscience and nanotechnology (nanotechnology for short) as its case and compares the responses of RFOs in Finland, the Netherlands, Norway and Finland.

  13. Overview of the Defense Programs Research and Technology Development Program for fiscal year 1993. Appendix II research laboratories and facilities

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-30

    This document contains summaries of the research facilities that support the Defense Programs Research and Technology Development Program for FY 1993. The nine program elements are aggregated into three program clusters as follows: (1) Advanced materials sciences and technologies; chemistry and materials, explosives, special nuclear materials (SNM), and tritium. (2) Design sciences and advanced computation; physics, conceptual design and assessment, and computation and modeling. (3) Advanced manufacturing technologies and capabilities; system engineering science and technology, and electronics, photonics, sensors, and mechanical components. Section I gives a brief summary of 23 major defense program (DP) research and technology facilities and shows how these major facilities are organized by program elements. Section II gives a more detailed breakdown of the over 200 research and technology facilities being used at the Laboratories to support the Defense Programs mission.

  14. IFMIF-KEP. International fusion materials irradiation facility key element technology phase report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-01

    The International Fusion Materials Irradiation Facility (IFMIF) is an accelerator-based D-Li neutron source designed to produce an intense neutron field that will simulate the neutron environment of a D-T fusion reactor. IFMIF will provide a neutron flux equivalent to 2 MW/m{sup 2}, 20 dpa/y in Fe, in a volume of 500 cm{sup 3} and will be used in the development and qualification of materials for fusion systems. The design activities of IFMIF are performed under an IEA collaboration which began in 1995. In 2000, a three-year Key Element Technology Phase (KEP) of IFMIF was undertaken to reduce the key technology risk factors. This KEP report describes the results of the three-year KEP activities in the major project areas of accelerator, target, test facilities and design integration. (author)

  15. IFMIF-KEP. International fusion materials irradiation facility key element technology phase report

    International Nuclear Information System (INIS)

    2003-03-01

    The International Fusion Materials Irradiation Facility (IFMIF) is an accelerator-based D-Li neutron source designed to produce an intense neutron field that will simulate the neutron environment of a D-T fusion reactor. IFMIF will provide a neutron flux equivalent to 2 MW/m 2 , 20 dpa/y in Fe, in a volume of 500 cm 3 and will be used in the development and qualification of materials for fusion systems. The design activities of IFMIF are performed under an IEA collaboration which began in 1995. In 2000, a three-year Key Element Technology Phase (KEP) of IFMIF was undertaken to reduce the key technology risk factors. This KEP report describes the results of the three-year KEP activities in the major project areas of accelerator, target, test facilities and design integration. (author)

  16. Technology of mirror machines: LLL facilities for magnetic mirror fusion experiments

    International Nuclear Information System (INIS)

    Batzer, T.H.

    1977-01-01

    Significant progress in plasma confinement and temperature has been achieved in the 2XIIB facility at Livermore. These encouraging results, and their theoretical corroboration, have provided a firm basis for the design of a new generation of magnetic mirror experiments, adding support to the mirror concept of a fusion reactor. Two new mirror experiments have been proposed to succeed the currently operating 2XIIB facility. The first of these called TMX (Tandem Mirror Experiment) has been approved and is currently under construction. TMX is designed to utilize the intrinsic positive plasma potential of two strong, and relatively small, minimum B mirror cells to enhance the confinement of a much larger, magnetically weaker, centrally-located mirror cell. The second facility, MFTF (Mirror Fusion Test Facility), is currently in preliminary design with line item approval anticipated for FY 78. MFTF is designed primarily to exploit the experimental and theoretical results derived from 2XIIB. Beyond that, MFTF will develop the technology for the transition from the present small mirror experiments to large steady-state devices such as the mirror FERF/FTR. The sheer magnitude of the plasma volume, magnetic field, neutral beam power, and vacuum pumping capacity, particularly in the case of MFTF, has placed new and exciting demands on engineering technology. An engineering overview of MFTF, TMX, and associated MFE activities at Livermore will be presented

  17. Prospective Teachers’ Tendencies to Utilize From the Facilities of Contemporary Educational Technology

    OpenAIRE

    Gizem SAYGILI; Teoman İsmail KESERCİOĞLU

    2015-01-01

    In terms of effectiveness and efficiency, it is important to determine the views of prospective teachers related to taking advantage of the facilities of contemporary educational technology. This study which aims to identify prospective teachers’ attitudes towards computer-assisted learning was conducted with 140 prospective teachers (86 female, 54 male) who have been attending pedagogical formation education at Süleyman Demirel University in the 2013 academic year. In this study, in eight di...

  18. Large-scale decontamination and decommissioning technology demonstration project at a former uranium metal production facility

    International Nuclear Information System (INIS)

    Martineit, R.A.; Borgman, T.D.; Peters, M.S.; Stebbins, L.L.

    1997-01-01

    The Department of Energy's (DOE) Office of Science and Technology Decontamination and Decommissioning (D ampersand D) Focus Area, led by the Federal Energy Technology Center, has been charged with improving upon baseline D ampersand D technologies with the goal of demonstrating and validating more cost-effective and safer technologies to characterize, deactivate, survey, decontaminate, dismantle, and dispose of surplus structures, buildings, and their contents at DOE sites. The D ampersand D Focus Area's approach to verifying the benefits of the improved D ampersand D technologies is to use them in large-scale technology demonstration (LSTD) projects at several DOE sites. The Fernald Environmental Management Project (FEMP) was selected to host one of the first three LSTD's awarded by the D ampersand D Focus Area. The FEMP is a DOE facility near Cincinnati, Ohio, that was formerly engaged in the production of high quality uranium metal. The FEMP is a Superfund site which has completed its RUFS process and is currently undergoing environmental restoration. With the FEMP's selection to host an LSTD, the FEMP was immediately faced with some challenges. The primary challenge was that this LSTD was to be integrated into the FEMP's Plant 1 D ampersand D Project which was an ongoing D ampersand D Project for which a firm fixed price contract had been issued to the D ampersand D Contractor. Thus, interferences with the baseline D ampersand D project could have significant financial implications. Other challenges include defining and selecting meaningful technology demonstrations, finding/selecting technology providers, and integrating the technology into the baseline D ampersand D project. To date, twelve technologies have been selected, and six have been demonstrated. The technology demonstrations have yielded a high proportion of open-quotes winners.close quotes All demonstrated, technologies will be evaluated for incorporation into the FEMP's baseline D ampersand D

  19. Applicability of water-jet cutting technology to nuclear facility decommissioning

    International Nuclear Information System (INIS)

    Abe, Tadashi; Nisizaki, Tadashi; Matumura, Hiroyuki; Ikemoto, Yosikazu; Simizu, Hideki

    1991-01-01

    In nuclear facilities there exist, besides relatively simple components, such as vessels and piping, numerous complex components including the multilayered plate with water layer in between, a bunch of thin tubes and composite lamination of dissimilar materials like metal/non-metal. In conventional development of reactor dismantling technology, the technology development has been made mainly for remote cutting of thick-walled structures like the reactor pressure vessel and the reactor internals. These techniques, however, are not always suitable in cutting the above-mentioned structures. As means of cutting such structures efficiently, these is available the abrasion water-jet cutting technology. This technology is now drawing attention for cutting or shaping new materials like composite material and ceramics in high precision and high efficiency. In the present report by way of its feasibility in nuclear facilities decommissioning the following are described. Principle and features of the water-jet cutting technology, system con-figuration, cutting or shaping performance, and some examples of the cutting and shaping. (author)

  20. Proceedings of the 8. National Seminar on Technology and Safety of Nuclear Power Plants and Nuclear Facilities

    International Nuclear Information System (INIS)

    Antariksawan, Anhar R.; Soetrisnanto, Arnold Y.; Aziz, Ferhat; Untoro, Pudji; Su'ud, Zaki; Zarkasi, Amin Santosa; Umar, Faraz H.; Teguh Bambang; Hafnan, M.; Mustafa, Bustani; Rosfian, H.

    2002-10-01

    The eight proceeding of National Seminar on Technology and Safety of Nuclear Power Plant and Nuclear Facilities held by National Atomic Energy Agency and University of Trisakti. The aims of Seminar is to exchange and disseminate information about safety and nuclear Power Plant Temperature Reactor and Application for National Development sustain able and High Technology. This Seminar covers all aspect Technology, Power Reactor : Research Reactor; High Temperature Reactor and Nuclear Facilities. There are 33 articles have separated index

  1. Advancing nuclear technology and research. The advanced test reactor national scientific user facility

    Energy Technology Data Exchange (ETDEWEB)

    Benson, Jeff B; Marshall, Frances M [Idaho National Laboratory, Idaho Falls, ID (United States); Allen, Todd R [Univ. of Wisconsin, Madison, WI (United States)

    2012-03-15

    The Advanced Test Reactor (ATR), at the Idaho National Laboratory (INL), is one of the world's premier test reactors for providing the capability for studying the effects of intense neutron and gamma radiation on reactor materials and fuels. The INL also has several hot cells and other laboratories in which irradiated material can be examined to study material radiation effects. In 2007 the US Department of Energy (DOE) designated the ATR as a National Scientific User Facility (NSUF) to facilitate greater access to the ATR and the associated INL laboratories for material testing research. The mission of the ATR NSUF is to provide access to world-class facilities, thereby facilitating the advancement of nuclear science and technology. Cost free access to the ATR, INL post irradiation examination facilities, and partner facilities is granted based on technical merit to U.S. university-led experiment teams conducting non-proprietary research. Proposals are selected via independent technical peer review and relevance to United States Department of Energy. To increase overall research capability, ATR NSUF seeks to form strategic partnerships with university facilities that add significant nuclear research capability to the ATR NSUF and are accessible to all ATR NSUF users. (author)

  2. Integrated Electrical and Thermal Grid Facility - Testing of Future Microgrid Technologies

    Directory of Open Access Journals (Sweden)

    Sundar Raj Thangavelu

    2015-09-01

    Full Text Available This paper describes the Experimental Power Grid Centre (EPGC microgrid test facility, which was developed to enable research, development and testing for a wide range of distributed generation and microgrid technologies. The EPGC microgrid facility comprises a integrated electrical and thermal grid with a flexible and configurable architecture, and includes various distributed energy resources and emulators, such as generators, renewable, energy storage technologies and programmable load banks. The integrated thermal grid provides an opportunity to harness waste heat produced by the generators for combined heat, power and cooling applications, and support research in optimization of combined electrical-thermal systems. Several case studies are presented to demonstrate the testing of different control and operation strategies for storage systems in grid-connected and islanded microgrids. One of the case studies also demonstrates an integrated thermal grid to convert waste heat to useful energy, which thus far resulted in a higher combined energy efficiency. Experiment results confirm that the facility enables testing and evaluation of grid technologies and practical problems that may not be apparent in a computer simulated environment.

  3. Efficiency and cost advantages of an advanced-technology nuclear electrolytic hydrogen-energy production facility

    Science.gov (United States)

    Donakowski, T. D.; Escher, W. J. D.; Gregory, D. P.

    1977-01-01

    The concept of an advanced-technology (viz., 1985 technology) nuclear-electrolytic water electrolysis facility was assessed for hydrogen production cost and efficiency expectations. The facility integrates (1) a high-temperature gas-cooled nuclear reactor (HTGR) operating a binary work cycle, (2) direct-current (d-c) electricity generation via acyclic generators, and (3) high-current-density, high-pressure electrolyzers using a solid polymer electrolyte (SPE). All subsystems are close-coupled and optimally interfaced for hydrogen production alone (i.e., without separate production of electrical power). Pipeline-pressure hydrogen and oxygen are produced at 6900 kPa (1000 psi). We found that this advanced facility would produce hydrogen at costs that were approximately half those associated with contemporary-technology nuclear electrolysis: $5.36 versus $10.86/million Btu, respectively. The nuclear-heat-to-hydrogen-energy conversion efficiency for the advanced system was estimated as 43%, versus 25% for the contemporary system.

  4. Present state of inspection robot technology in nuclear power facilities. Case of fast breeder reactors

    International Nuclear Information System (INIS)

    Ara, Kuniaki

    1995-01-01

    In the maintenance works in nuclear power facilities such as checkup, inspection and repair, for the main purpose of radiation protection, remote operation technology was introduced since relatively early stage, and at present, the robots that carry out the inspection works for confirming the soundness of main equipment have been developed and put to practical use. At the time of introducing these technologies, in addition to the research and development of robots proper, the coordination with the design of plant machinery and equipment facilities as the premise of introducing robots is an important requirement. In this report, the present state of the development of remote inspection technology for fast breeder reactors is introduced, and the matters to which attention is paid in the plant design for introducing robots are explained. First, fast breeder reactors are described. The needs of robotizing and adopting remote operation in nuclear power facilities are explained, using the examples of the inspection system for a reactor vessel and the inspection system for steam generator heat transfer tubes. (K.I.)

  5. Electron beam facilities and technologies developed in the Institute of Nuclear Chemistry and Technology

    International Nuclear Information System (INIS)

    Chmielewski, A.G.; Walis, L.; Zimek, Z.

    1992-01-01

    The operation of the first electron accelerator has been started at Institute /former Institute for Nuclear Research/ in 1971. This LAE-13/9 accelerator is a two-section lineac with adjustable energy of electrons: 5 to 13 MeV and the beam power up to 9 kW. The main technologies developed on the basis of LAE-13/9 are: sterilization, manufacturing of thermoshrinkable materials and modification of semiconductors. The accelerator is operated 4000 hours per year and used for small scale production and services in these fields. The other problems investigated in laboratory scale are: food preservation and hygenization, hygenization of municipal sewage sludge, and bio-conversion of pig-farm wastes into animal fodder. The laboratory experiments are basis for pilot construction and other industrial applications. The mentioned technology of thermoshrinkable tube production was implemented in industrial scale at ZWUT Czluchow which factory is equipped in the accelerator ILU-6 /20 kW, 2 MeV/. On the basis of similar unit a technological installation was built at Institute. The plant is furnished with a conveyer and the rewinding machines for tubes and tapes manufacturing. This allows continuous production of these materials. The plant will start operation next year and linear accelerator /10 MeV, 15 kW/ for this purpose is already delivered. The pilot plant for food preservation and hygenization has been built. It is equipped in small pilot accelerator 10 MeV, 1 kW and will be furnished with 10 MeV, 10 kW lineac this year. Beside of this technological lines Institute is furnished in Van de Graff accelerator /2, MeV, 100 μA/ and another laboratory unit LAE-10 /10 MeV, 10-100 ns 2 us/ is under construction. (J.P.N.)

  6. Supporting Facility Management Processes through End-Users’ Integration and Coordinated BIM-GIS Technologies

    Directory of Open Access Journals (Sweden)

    Claudio Mirarchi

    2018-05-01

    Full Text Available The integration of facility management and building information modelling (BIM is an innovative and critical undertaking process to support facility maintenance and management. Even though recent research has proposed various methods and performed an increasing number of case studies, there are still issues of communication processes to be addressed. This paper presents a theoretical framework for digital systems integration of virtual models and smart technologies. Based on the comprehensive analysis of existing technologies for indoor localization, a new workflow is defined and designed, and it is utilized in a practical case study to test the model performance. In the new workflow, a facility management supporting platform is proposed and characterized, featuring indoor positioning systems to allow end users to send geo-referenced reports to central virtual models. In addition, system requirements, information technology (IT architecture and application procedures are presented. Results show that the integration of end users in the maintenance processes through smart and easy tools can overcome the existing limits of barcode systems and building management systems for failure localization. The proposed framework offers several advantages. First, it allows the identification of every element of an asset including wide physical building elements (walls, floors, etc. without requiring a prior mapping. Second, the entire cycle of maintenance activities is managed through a unique integrated system including the territorial dimension. Third, data are collected in a standard structure for future uses. Furthermore, the integration of the process in a centralized BIM-GIS (geographical information system information management system admit a scalable representation of the information supporting facility management processes in terms of assets and supply chain management and monitoring from a spatial perspective.

  7. Space Technology Demonstrations Using Low Cost, Short-Schedule Airborne and Range Facilities at the Dryden Flight Research Center

    Science.gov (United States)

    Carter, John; Kelly, John; Jones, Dan; Lee, James

    2013-01-01

    There is a national effort to expedite advanced space technologies on new space systems for both government and commercial applications. In order to lower risk, these technologies should be demonstrated in a relevant environment before being installed in new space systems. This presentation introduces several low cost, short schedule space technology demonstrations using airborne and range facilities available at the Dryden Flight Research Center.

  8. Novel technologies for the detection of undeclared nuclear activities, materials and facilities

    Energy Technology Data Exchange (ETDEWEB)

    Whichello, Julian V.K.; Annese, Cynthia E. [International Atomic Energy Agency, Vienna (Austria). Division of Technical Support

    2008-07-01

    This paper will discuss the International Atomic Energy Agency's (IAEA's) Novel Technologies Project and its main goal of developing improved methods and technologies that will further enhance the detection of undeclared nuclear activities, materials and facilities. A major and fundamental task within the Project has been the development of methodologies and tools for identifying, documenting and utilizing nuclear fuel cycle (NFC) indicators and signatures (I and S) to facilitate a nuclear safeguards technology gap analysis. The outcome of this work will provide a basis for a novel range of methods and instruments, the development of which will contribute to the IAEA's overall objective of enhanced detection capabilities. (author)

  9. Application of advanced remote systems technology to future waste handling facilities

    International Nuclear Information System (INIS)

    Kring, C.T.; Meacham, S.A.

    1987-01-01

    The Consolidated Fuel Reprocessing Program (CFRP) at Oak Ridge National Laboratory (ORNL) has been advancing the technology of remote handling and remote maintenance for in-cell systems planned for future nuclear fuel reprocessing plants. Much of the experience and technology developed over the past decade in this endeavor is directly applicable to the proposed in-cell systems being considered for the facilities of the Federal Waste Management System (FWMS). The application of teleoperated, force-reflecting servomanipulators with television viewing could be a major step forward in waste handling facility design. Primary emphasis in the current program is the operation of a prototype remote handling and maintenance system, the advanced servomanipulator (ASM), which specifically addresses the requirements of fuel reprocessing and waste handling with emphasis on force reflection, remote maintainability, reliability, radiation tolerance, and corrosion resistance. Concurrent with the evolution of dexterous manipulators, concepts have also been developed that provide guidance for standardization of the design of the remotely operated and maintained equipment, the interface between the maintenance tools and the equipment, and the interface between the in-cell components and the facility

  10. Description and Operational Experiences of the Engineering Test Facility - Helium Technology (ETF-HT)

    International Nuclear Information System (INIS)

    Zhang Zuoyi; Yang Mingde; Bo Hanliang; Duan Riqqiang; Zhu Hongye

    2014-01-01

    This paper presents the configuration of the Engineering Test Facility - Helium Technology (ETF-HT) and the information of its key components and subsystems, which is located in the Changping campus of Tsinghua University. The ETF-HT facility began to be constructed in Jan. 2009. The main objective of the facility is to test and verify the thermo-hydraulic performance of one full-sized modular unit of HTR-PM helically coiled SG assembly. In the ETF-HT facility, electricity energy is used to heat the loop helium, centrifugal blower is used to circulate the helium medium, and the heat sink is one would-tested SG module. Up to now, except for the tested SG module, preheater and hot gas duct under way of construction, the other components has been installed in situ. Via the temporary connection of the installed components, the preliminary operation of the loop has been carried out to test its performances as can be done, which include the loop leak tightness, blower pneumatic performance and electrical heater at partial thermal load. (author)

  11. International technology exchange in support of the Defense Waste Processing Facility wasteform production

    International Nuclear Information System (INIS)

    Kitchen, B.G.

    1989-01-01

    The nearly completed Defense Waste Processing Facility (DWPF) is a Department of Energy (DOE) facility at the Savannah River Site that is designed to immobilize defense high level radioactive waste (HLW) by vitrification in borosilicate glass and containment in stainless steel canisters suitable for storage in the future DOE HLW repository. The DWPF is expected to start cold operation later this year (1990), and will be the first full scale vitrification facility operating in the United States, and the largest in the world. The DOE has been coordinating technology transfer and exchange on issues relating to HLW treatment and disposal through bi-lateral agreements with several nations. For the nearly fifteen years of the vitrification program at Savannah River Laboratory, over two hundred exchanges have been conducted with a dozen international agencies involving about five-hundred foreign national specialists. These international exchanges have been beneficial to the DOE's waste management efforts through confirmation of the choice of the waste form, enhanced understanding of melter operating phenomena, support for paths forward in political/regulatory arenas, confirmation of costs for waste form compliance programs, and establishing the need for enhancements of melter facility designs. This paper will compare designs and schedules of the international vitrification programs, and will discuss technical areas where the exchanges have provided data that have confirmed and aided US research and development efforts, impacted the design of the DWPF and guided the planning for regulatory interaction and product acceptance

  12. A beamline systems model for Accelerator-Driven Transmutation Technology (ADTT) facilities

    Energy Technology Data Exchange (ETDEWEB)

    Todd, A.M.M.; Paulson, C.C.; Peacock, M.A. [Grumman Research and Development Center, Princeton, NJ (United States)] [and others

    1995-10-01

    A beamline systems code, that is being developed for Accelerator-Driven Transmutation Technology (ADTT) facility trade studies, is described. The overall program is a joint Grumman, G.H. Gillespie Associates (GHGA) and Los Alamos National Laboratory effort. The GHGA Accelerator Systems Model (ASM) has been adopted as the framework on which this effort is based. Relevant accelerator and beam transport models from earlier Grumman systems codes are being adapted to this framework. Preliminary physics and engineering models for each ADTT beamline component have been constructed. Examples noted include a Bridge Coupled Drift Tube Linac (BCDTL) and the accelerator thermal system. A decision has been made to confine the ASM framework principally to beamline modeling, while detailed target/blanket, balance-of-plant and facility costing analysis will be performed externally. An interfacing external balance-of-plant and facility costing model, which will permit the performance of iterative facility trade studies, is under separate development. An ABC (Accelerator Based Conversion) example is used to highlight the present models and capabilities.

  13. A beamline systems model for Accelerator-Driven Transmutation Technology (ADTT) facilities

    International Nuclear Information System (INIS)

    Todd, Alan M. M.; Paulson, C. C.; Peacock, M. A.; Reusch, M. F.

    1995-01-01

    A beamline systems code, that is being developed for Accelerator-Driven Transmutation Technology (ADTT) facility trade studies, is described. The overall program is a joint Grumman, G. H. Gillespie Associates (GHGA) and Los Alamos National Laboratory effort. The GHGA Accelerator Systems Model (ASM) has been adopted as the framework on which this effort is based. Relevant accelerator and beam transport models from earlier Grumman systems codes are being adapted to this framework. Preliminary physics and engineering models for each ADTT beamline component have been constructed. Examples noted include a Bridge Coupled Drift Tube Linac (BCDTL) and the accelerator thermal system. A decision has been made to confine the ASM framework principally to beamline modeling, while detailed target/blanket, balance-of-plant and facility costing analysis will be performed externally. An interfacing external balance-of-plant and facility costing model, which will permit the performance of iterative facility trade studies, is under separate development. An ABC (Accelerator Based Conversion) example is used to highlight the present models and capabilities

  14. Nuclear facilities: repair and replacement technologies; Installations nucleaires: technologies de reparation et de remplacement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    The oldest operating reactors are more than 35 years old and are now facing major maintenance operations. The first replacement of a pressurizer took place in autumn 2005 at the St-Lucie plant (Usa) while steam generators have been currently replaced since 1983. Nuclear industry has to adapt to this new market by proposing innovative technological solutions in the reactor maintenance field. This document gathers the 9 papers presented at the conference. The main improvements concern repair works on internal components of PWR-type reactors, the replacement of major components of the primary coolant circuit and surface treatments to limit the propagation of damages. The first paper shows that adequate design and feedback experience are good assets to manage the ageing of a nuclear unit. Another paper shows that a new repair method of a relief valve can avoid its replacement. (A.C.)

  15. Emerging Concepts, Technologies and Opportunities for Mezzo-scale Terahertz and Infrared Facilities

    International Nuclear Information System (INIS)

    Swapan Chattopadhyay; Steven T. Corneliussen; Gwyn P. Williams

    2004-01-01

    Recent advances in high-current particle beam, bright photoinjector, laser and radiofrequency technologies, combined with innovative techniques such as energy recovery and laser-slicing of particle beams, have opened up new scientific opportunities with terahertz and infrared sources. They present new scientific frontiers not just in sources but in basic research applications involving timescale measurements and investigations at the quantum level. Such long-wavelength sources complement high-energy, short-wavelength x-ray sources by allowing collective processes and their ''function'' in complex systems to be probed in a fashion complementary to probing 'structure' via x-rays. This paper outlines and gives examples of the scientific reach of such sources and discusses some actual and envisioned facilities worldwide. Such facilities fall in the mezzo-scale category, bracketed by tabletop lasers and large synchrotrons. They offer unique and directed advances in life, materials and other sciences

  16. Structural Integrity Program for the Calcined Solids Storage Facilities at the Idaho Nuclear Technology and Engineering Center

    International Nuclear Information System (INIS)

    Bryant, J.W.; Nenni, J.A.

    2003-01-01

    This report documents the activities of the structural integrity program at the Idaho Nuclear Technology and Engineering Center relevant to the high-level waste Calcined Solids Storage Facilities and associated equipment, as required by DOE M 435.1-1, ''Radioactive Waste Management Manual.'' Based on the evaluation documented in this report, the Calcined Solids Storage Facilities are not leaking and are structurally sound for continued service. Recommendations are provided for continued monitoring of the Calcined Solids Storage Facilities

  17. Structural Integrity Program for the Calcined Solids Storage Facilities at the Idaho Nuclear Technology and Engineering Center

    International Nuclear Information System (INIS)

    Jeffrey Bryant

    2008-01-01

    This report documents the activities of the structural integrity program at the Idaho Nuclear Technology and Engineering Center relevant to the high-level waste Calcined Solids Storage Facilities and associated equipment, as required by DOE M 435.1-1, 'Radioactive Waste Management Manual'. Based on the evaluation documented in this report, the Calcined Solids Storage Facilities are not leaking and are structurally sound for continued service. Recommendations are provided for continued monitoring of the Calcined Solids Storage Facilities

  18. MicroArray Facility: a laboratory information management system with extended support for Nylon based technologies

    Directory of Open Access Journals (Sweden)

    Beaudoing Emmanuel

    2006-09-01

    Full Text Available Abstract Background High throughput gene expression profiling (GEP is becoming a routine technique in life science laboratories. With experimental designs that repeatedly span thousands of genes and hundreds of samples, relying on a dedicated database infrastructure is no longer an option. GEP technology is a fast moving target, with new approaches constantly broadening the field diversity. This technology heterogeneity, compounded by the informatics complexity of GEP databases, means that software developments have so far focused on mainstream techniques, leaving less typical yet established techniques such as Nylon microarrays at best partially supported. Results MAF (MicroArray Facility is the laboratory database system we have developed for managing the design, production and hybridization of spotted microarrays. Although it can support the widely used glass microarrays and oligo-chips, MAF was designed with the specific idiosyncrasies of Nylon based microarrays in mind. Notably single channel radioactive probes, microarray stripping and reuse, vector control hybridizations and spike-in controls are all natively supported by the software suite. MicroArray Facility is MIAME supportive and dynamically provides feedback on missing annotations to help users estimate effective MIAME compliance. Genomic data such as clone identifiers and gene symbols are also directly annotated by MAF software using standard public resources. The MAGE-ML data format is implemented for full data export. Journalized database operations (audit tracking, data anonymization, material traceability and user/project level confidentiality policies are also managed by MAF. Conclusion MicroArray Facility is a complete data management system for microarray producers and end-users. Particular care has been devoted to adequately model Nylon based microarrays. The MAF system, developed and implemented in both private and academic environments, has proved a robust solution for

  19. Best available technology for the Los Alamos National Laboratory Radioactive Liquid Waste Treatment Facility

    International Nuclear Information System (INIS)

    Midkiff, W.S.; Romero, R.L.; Suazo, I.L.; Garcia, R.; Parsons, R.M.

    1993-01-01

    The existing Los Alamos National Laboratory TA-50 liquid radioactive waste treatment plant RLWP has been in service for over thirty years, during this period many technical, regulatory, and processing changes have occurred. The existing facility can no longer comply with the demands and requirements for continued operation, and would not be able to comply with anticipated stringent future contaminant discharge limitations. Either a major upgrading or replacement of the existing facility is required. In order to assess the most appropriate means of providing an adequate facility to comply with predicted requirements for Ta-50, this Best Available Technology (BAT) Study was conducted to compare feasible technical and economic alternatives in order to define the most favorable technology configuration. This report consists of eleven sections. Section 1 provides a general introduction and background of the TA-50 operations and the basis for this study. Section 2 provides a technical discussion of the unit processes at TA-50 and several other comparable operations at other DOE sites. Section 3 addresses the evaluation and selection of appropriate treatment processes. Section 4 provides an analysis of environmental issues and concerns. Section 5 presents the rationale for the selection of preferred process configurations. Section 6 is the evaluation of operational issues. Section 7 addresses energy and resource use topics. Section 8 provides an economic analysis, and Section 9 summarizes the evaluation and the identification of the BAT. These sections are augmented by appendices. The report identifies the construction of a new radioactive liquid waste treatment facility as the BAT. Based on the information analyzed for this study, this option appears to provide the best combination of environmental compliance, operability, and economic value

  20. Technological options for management of hazardous wastes from US Department of Energy facilities

    Energy Technology Data Exchange (ETDEWEB)

    Chiu, S.; Newsom, D.; Barisas, S.; Humphrey, J.; Fradkin, L.; Surles, T.

    1982-08-01

    This report provides comprehensive information on the technological options for management of hazardous wastes generated at facilities owned or operated by the US Department of Energy (DOE). These facilities annually generate a large quantity of wastes that could be deemed hazardous under the Resource Conservation and Recovery Act (RCRA). Included in these wastes are liquids or solids containing polychlorinated biphenyls, pesticides, heavy metals, waste oils, spent solvents, acids, bases, carcinogens, and numerous other pollutants. Some of these wastes consist of nonnuclear hazardous chemicals; others are mixed wastes containing radioactive materials and hazardous chemicals. Nearly 20 unit processes and disposal methods are presented in this report. They were selected on the basis of their proven utility in waste management and potential applicability at DOE sites. These technological options fall into five categories: physical processes, chemical processes, waste exchange, fixation, and ultimate disposal. The options can be employed for either resource recovery, waste detoxification, volume reduction, or perpetual storage. Detailed descriptions of each technological option are presented, including information on process performance, cost, energy and environmental considerations, waste management of applications, and potential applications at DOE sites. 131 references, 25 figures, 23 tables.

  1. Technological options for management of hazardous wastes from US Department of Energy facilities

    International Nuclear Information System (INIS)

    Chiu, S.; Newsom, D.; Barisas, S.; Humphrey, J.; Fradkin, L.; Surles, T.

    1982-08-01

    This report provides comprehensive information on the technological options for management of hazardous wastes generated at facilities owned or operated by the US Department of Energy (DOE). These facilities annually generate a large quantity of wastes that could be deemed hazardous under the Resource Conservation and Recovery Act (RCRA). Included in these wastes are liquids or solids containing polychlorinated biphenyls, pesticides, heavy metals, waste oils, spent solvents, acids, bases, carcinogens, and numerous other pollutants. Some of these wastes consist of nonnuclear hazardous chemicals; others are mixed wastes containing radioactive materials and hazardous chemicals. Nearly 20 unit processes and disposal methods are presented in this report. They were selected on the basis of their proven utility in waste management and potential applicability at DOE sites. These technological options fall into five categories: physical processes, chemical processes, waste exchange, fixation, and ultimate disposal. The options can be employed for either resource recovery, waste detoxification, volume reduction, or perpetual storage. Detailed descriptions of each technological option are presented, including information on process performance, cost, energy and environmental considerations, waste management of applications, and potential applications at DOE sites. 131 references, 25 figures, 23 tables

  2. Privacy and senior willingness to adopt smart home information technology in residential care facilities.

    Science.gov (United States)

    Courtney, K L

    2008-01-01

    With large predicted increases of the older adult (65 years and older) population, researchers have been exploring the use of smart home information technologies (IT) in residential care (RC) facilities to enhance resident quality of life and safety. Older adults' perceptions of privacy can inhibit their acceptance and subsequent adoption of smart home IT. This qualitative study, guided by principles of grounded theory research, investigated the relationship between privacy, living environment and willingness of older adults living in residential care facilities to adopt smart home IT through focus groups and individual interviews. The findings from this study indicate that privacy can be a barrier for older adults' adoption of smart home IT; however their own perception of their need for the technology may override their privacy concerns. Privacy concerns, as a barrier to technology adoption, can be influenced by both individual-level and community-level factors. Further exploration of the factors influencing older adults' perceptions of smart home IT need is necessary.

  3. Potential applications of advanced remote handling and maintenance technology to future waste handling facilities

    International Nuclear Information System (INIS)

    Kring, C.T.; Herndon, J.N.; Meacham, S.A.

    1987-01-01

    The Consolidated Fuel Reprocessing Program (CFRP) at the Oak Ridge National Laboratory (ORNL) has been advancing the technology in remote handling and remote maintenance of in-cell systems planned for future US nuclear fuel reprocessing plants. Much of the experience and technology developed over the past decade in this endeavor are directly applicable to the in-cell systems being considered for the facilities of the Federal Waste Management System (FWMS). The ORNL developments are based on the application of teleoperated force-reflecting servomanipulators controlled by an operator completely removed from the hazardous environment. These developments address the nonrepetitive nature of remote maintenance in the unstructured environments encountered in a waste handling facility. Employing technological advancements in dexterous manipulators, as well as basic design guidelines that have been developed for remotely maintained equipment and processes, can increase operation and maintenance system capabilities, thereby allowing the attainment of two Federal Waste Management System major objectives: decreasing plant personnel radiation exposure and increasing plant availability by decreasing the mean-time-to-repair in-cell maintenance and process equipment

  4. Potential applications of advanced remote handling and maintenance technology to future waste handling facilities

    International Nuclear Information System (INIS)

    Kring, C.T.; Herndon, J.N.; Meacham, S.A.

    1987-01-01

    The Consolidated Fuel Reprocessing Program (CFRP) at the Oak Ridge National Laboratory (ORNL) has been advancing the technology in remote handling and remote maintenance of in-cell systems planned for future U.S. nuclear fuel reprocessing plants. Much of the experience and technology developed over the past decade in this endeavor are directly applicable to the in-cell systems being considered for the facilities of the Federal Waste Management System (FWMS). The ORNL developments are based on the application of teleoperated force-reflecting servomanipulators controlled by an operator completely removed from the hazardous environment. These developments address the nonrepetitive nature of remote maintenance in the unstructured environments encountered in a waste handling facility. Employing technological advancements in dexterous manipulators, as well as basic design guidelines that have been developed for remotely maintained equipment and processes, can increase operation and maintenance system capabilities, thereby allowing the attainment of two Federal Waste Management System major objectives: decreasing plant personnel radiation exposure and increasing plant availability by decreasing the mean-time-to-repair in-cell maintenance and process equipment

  5. The advanced test reactor national scientific user facility advancing nuclear technology

    International Nuclear Information System (INIS)

    Allen, T.R.; Thelen, M.C.; Meyer, M.K.; Marshall, F.M.; Foster, J.; Benson, J.B.

    2009-01-01

    To help ensure the long-term viability of nuclear energy through a robust and sustained research and development effort, the U.S. Department of Energy (DOE) designated the Advanced Test Reactor and associated post-irradiation examination facilities a National Scientific User Facility (ATR NSUF), allowing broader access to nuclear energy researchers. The mission of the ATR NSUF is to provide access to world-class nuclear research facilities, thereby facilitating the advancement of nuclear science and technology. The ATR NSUF seeks to create an engaged academic and industrial user community that routinely conducts reactor-based research. Cost free access to the ATR and PIE facilities is granted based on technical merit to U.S. university-led experiment teams conducting non-proprietary research. Proposals are selected via independent technical peer review and relevance to DOE mission. Extensive publication of research results is expected as a condition for access. During FY 2008, the first full year of ATR NSUF operation, five university-led experiments were awarded access to the ATR and associated post-irradiation examination facilities. The ATR NSUF has awarded four new experiments in early FY 2009, and anticipates awarding additional experiments in the fall of 2009 as the results of the second 2009 proposal call. As the ATR NSUF program mature over the next two years, the capability to perform irradiation research of increasing complexity will become available. These capabilities include instrumented irradiation experiments and post-irradiation examinations on materials previously irradiated in U.S. reactor material test programs. The ATR critical facility will also be made available to researchers. An important component of the ATR NSUF an education program focused on the reactor-based tools available for resolving nuclear science and technology issues. The ATR NSUF provides education programs including a summer short course, internships, faculty-student team

  6. The Advanced Test Reactor National Scientific User Facility Advancing Nuclear Technology

    International Nuclear Information System (INIS)

    Allen, T.R.; Benson, J.B.; Foster, J.A.; Marshall, F.M.; Meyer, M.K.; Thelen, M.C.

    2009-01-01

    To help ensure the long-term viability of nuclear energy through a robust and sustained research and development effort, the U.S. Department of Energy (DOE) designated the Advanced Test Reactor and associated post-irradiation examination facilities a National Scientific User Facility (ATR NSUF), allowing broader access to nuclear energy researchers. The mission of the ATR NSUF is to provide access to world-class nuclear research facilities, thereby facilitating the advancement of nuclear science and technology. The ATR NSUF seeks to create an engaged academic and industrial user community that routinely conducts reactor-based research. Cost free access to the ATR and PIE facilities is granted based on technical merit to U.S. university-led experiment teams conducting non-proprietary research. Proposals are selected via independent technical peer review and relevance to DOE mission. Extensive publication of research results is expected as a condition for access. During FY 2008, the first full year of ATR NSUF operation, five university-led experiments were awarded access to the ATR and associated post-irradiation examination facilities. The ATR NSUF has awarded four new experiments in early FY 2009, and anticipates awarding additional experiments in the fall of 2009 as the results of the second 2009 proposal call. As the ATR NSUF program mature over the next two years, the capability to perform irradiation research of increasing complexity will become available. These capabilities include instrumented irradiation experiments and post-irradiation examinations on materials previously irradiated in U.S. reactor material test programs. The ATR critical facility will also be made available to researchers. An important component of the ATR NSUF an education program focused on the reactor-based tools available for resolving nuclear science and technology issues. The ATR NSUF provides education programs including a summer short course, internships, faculty-student team

  7. A vision for growing a world-class power technology cluster in a smart, sustainable British Columbia : full report to the Premier's Technology Council

    Energy Technology Data Exchange (ETDEWEB)

    Umedaly, M.

    2005-03-01

    This report presents a framework for power technology in British Columbia and the development of new sources of energy while ensuring the sustainable economic growth. It also explores the opportunities present in the power technology sector. A definition of the power technology industry was provided, and market drivers were identified, describing the region's competitive advantage and assets. Five market opportunities were introduced, comprising the report's targeted innovation strategy: remote power solutions; sustainable urban practices; smart transport; smart grid; and large scale clean green power production. An outline of the current energy market in British Columbia was presented with details of research and development in renewable energy sources. Global power demands were also outlined. A regional action plan was presented in order to develop the power technology cluster. Leadership strategies were presented, with economic development goals and working teams geared towards an implementation resource plan. A commercialization strategy was suggested in order to address local demand, commercialization funds, and increasing access and resources. A growth strategy was also presented to assist in the development of access to world markets, create partnerships and assist in branding and collaborations with industry and government. An innovation strategy was outlined, with the aim of developing research initiatives, support centres in key market and technology areas and connecting existing efforts in basic sciences to power technology applications. It was concluded that in order to achieve full implementation of these strategies, a short term task force is necessary to shape overall plans. Additionally, an ongoing vision team, working groups and coordination is necessary to implement overall strategies and subcomponents. Appendices were included with reference to each of the five market opportunities presented in the report. 58 refs.

  8. A vision for growing a world-class power technology cluster in a smart, sustainable British Columbia : full report to the Premier's Technology Council

    International Nuclear Information System (INIS)

    Umedaly, M.

    2005-03-01

    This report presents a framework for power technology in British Columbia and the development of new sources of energy while ensuring the sustainable economic growth. It also explores the opportunities present in the power technology sector. A definition of the power technology industry was provided, and market drivers were identified, describing the region's competitive advantage and assets. Five market opportunities were introduced, comprising the report's targeted innovation strategy: remote power solutions; sustainable urban practices; smart transport; smart grid; and large scale clean green power production. An outline of the current energy market in British Columbia was presented with details of research and development in renewable energy sources. Global power demands were also outlined. A regional action plan was presented in order to develop the power technology cluster. Leadership strategies were presented, with economic development goals and working teams geared towards an implementation resource plan. A commercialization strategy was suggested in order to address local demand, commercialization funds, and increasing access and resources. A growth strategy was also presented to assist in the development of access to world markets, create partnerships and assist in branding and collaborations with industry and government. An innovation strategy was outlined, with the aim of developing research initiatives, support centres in key market and technology areas and connecting existing efforts in basic sciences to power technology applications. It was concluded that in order to achieve full implementation of these strategies, a short term task force is necessary to shape overall plans. Additionally, an ongoing vision team, working groups and coordination is necessary to implement overall strategies and subcomponents. Appendices were included with reference to each of the five market opportunities presented in the report. 58 refs

  9. Simulation of Cascaded Longitudinal-Space-Charge Amplifier at the Fermilab Accelerator Science & Technology (Fast) Facility

    Energy Technology Data Exchange (ETDEWEB)

    Halavanau, A. [Northern Illinois U.; Piot, P. [Northern Illinois U.

    2015-12-01

    Cascaded Longitudinal Space Charge Amplifiers (LSCA) have been proposed as a mechanism to generate density modulation over a board spectral range. The scheme has been recently demonstrated in the optical regime and has confirmed the production of broadband optical radiation. In this paper we investigate, via numerical simulations, the performance of a cascaded LSCA beamline at the Fermilab Accelerator Science & Technology (FAST) facility to produce broadband ultraviolet radiation. Our studies are carried out using elegant with included tree-based grid-less space charge algorithm.

  10. National Safety Council

    Science.gov (United States)

    ... work, in homes and communities, and on the road through leadership, research, education and advocacy. NSC Newsletter Sign up for our newsletter! Like Us on Facebook National Safety Council © National Safety Council. All rights reserved. Contact ...

  11. APA Council Reports.

    Science.gov (United States)

    2017-10-01

    At the fall component meetings of the American Psychiatric Association in Arlington, Va., September 13-16, 2017, the APA councils heard reports from their components. Following are summaries of the activities of the councils and their components.

  12. Development of remote handling technology for nuclear fuel cycle facilities in Japan

    International Nuclear Information System (INIS)

    Maekawa, Hiromichi; Sakai, Akira; Miura, Noriaki; Kozaka, Tetsuo; Hamada, Takashi

    2015-01-01

    Remote handling technology has been systematically developed for nuclear fuel cycle facilities in Japan since 1970s, primarily in parallel with the development of reprocessing and HLLW (High Level Liquid Waste) vitrification process. In case of reprocessing and vitrification process to handle highly radioactive and hazardous materials, the most of components are installed in the radiation shielded hot cells and operators are not allowed to enter the work area in the cells for operation and maintenance. Therefore, a completely remote handling system is adopted for the cells to reduce radiation doses of operators and increase the availability of the facility. The hot cells are generally designed considering the scale of components (laboratory, demonstration, or full-scale), the function of the systems (chemical process, material handling, dismantling, decontamination, or chemical analysis), and the environmental conditions (radiation dose rate, airborne concentration, surface contamination, or fume/mist/dust). Throughout our domestic development work for remote handling technology, the concept of the large scale integrated cell has been adopted rather than a number of small scale separated cells, for the reasons to reduce the total installation space and the number of remote handling equipment required for the each cell as much as possible. In our domestic remote maintenance design, several new concepts have been developed, tested, and demonstrated in the Tokai Virtrification Facility (TVF) and the Rokkasho HLLW Vitrification and Storage Facility (K-facility). Layout in the hot cells, the performance of remote handling equipment, and the structure of the in-cell components are important factors for remote maintenance design. In case of TVF (hot tests started in 1995), piping and vessels are prefabricated in the rack modules and installed in two lines on both sides of the cell. These modules are designed to be remotely replaced in the whole rack. Two overhead cranes

  13. Experimental facility for development of high-temperature reactor technology: instrumentation needs and challenges

    Directory of Open Access Journals (Sweden)

    Sabharwall Piyush

    2015-01-01

    Full Text Available A high-temperature, multi-fluid, multi-loop test facility is under development at the Idaho National Laboratory for support of thermal hydraulic materials, and system integration research for high-temperature reactors. The experimental facility includes a high-temperature helium loop, a liquid salt loop, and a hot water/steam loop. The three loops will be thermally coupled through an intermediate heat exchanger (IHX and a secondary heat exchanger (SHX. Research topics to be addressed include the characterization and performance evaluation of candidate compact heat exchangers such as printed circuit heat exchangers (PCHEs at prototypical operating conditions. Each loop will also include an interchangeable high-temperature test section that can be customized to address specific research issues associated with each working fluid. This paper also discusses needs and challenges associated with advanced instrumentation for the multi-loop facility, which could be further applied to advanced high-temperature reactors. Based on its relevance to advanced reactor systems, the new facility has been named the Advanced Reactor Technology Integral System Test (ARTIST facility. A preliminary design configuration of the ARTIST facility will be presented with the required design and operating characteristics of the various components. The initial configuration will include a high-temperature (750 °C, high-pressure (7 MPa helium loop thermally integrated with a molten fluoride salt (KF-ZrF4 flow loop operating at low pressure (0.2 MPa, at a temperature of ∼450 °C. The salt loop will be thermally integrated with the steam/water loop operating at PWR conditions. Experiment design challenges include identifying suitable materials and components that will withstand the required loop operating conditions. The instrumentation needs to be highly accurate (negligible drift in measuring operational data for extended periods of times, as data collected will be

  14. Experimental facility for development of high-temperature reactor technology: instrumentation needs and challenges - 15066

    International Nuclear Information System (INIS)

    Sabharwall, P.; O'Brien, J.E.; Yoon, S.J.; Sun, X.

    2015-01-01

    A high-temperature, multi-fluid, multi-loop test facility is under development at the Idaho National Laboratory for support of thermal hydraulic, materials, and system integration research for high-temperature reactors. The experimental facility includes a high-temperature helium loop, a liquid salt loop, and a hot water/steam loop. The 3 loops will be thermally coupled through an intermediate heat exchanger (IHX) and a secondary heat exchanger (SHX). Research topics to be addressed include the characterization and performance evaluation of candidate compact heat exchangers such as printed circuits heat exchangers (PCHEs) at prototypical operating conditions. Each loop will also include an interchangeable high-temperature test section that can be customized to address specific research issues associated with each working fluid. This paper also discusses needs and challenges associated with advanced instrumentation for the multi-loop facility, which could be further applied to advanced high-temperature reactors. Based on its relevance to advanced reactor systems, the new facility has been named the Advanced Reactor Technology Integrated System Test (ARTIST) facility. A preliminary design configuration of the ARTIST facility will be presented with the required design and operating characteristics of the various components. The initial configuration will include a high-temperature (750 C. degrees), high-pressure (7 MPa) helium loop thermally integrated with a molten fluoride salt (KF-ZrF 4 ) flow loop operating at low pressure (0.2 MPa), at a temperature of ∼ 450 C. degrees. The salt loop will be thermally integrated with the steam/water loop operating at PWR conditions. Experiment design challenges include identifying suitable materials and components that will withstand the required loop operating conditions. The instrumentation needs to be highly accurate (negligible drift) in measuring operational data for extended periods of times, as data collected will be

  15. D and D Toolbox Project - Technology Demonstration of Fixatives Applied to Hot Cell Facilities via Remote Sprayer Platforms

    International Nuclear Information System (INIS)

    Lagos, L.; Shoffner, P.; Espinosa, E.; Pena, G.; Kirk, P.; Conley, T.

    2009-01-01

    The objective of the US Department of Energy Office of Environmental Management's (DOE-EM's) D and D Toolbox Project is to use an integrated systems approach to develop a suite of decontamination and decommissioning (D and D) technologies, a D and D toolbox, that can be readily used across the DOE complex to improve safety, reduce technical risks, and limit uncertainty within D and D operations. Florida International University's Applied Research Center (FIU-ARC) is supporting this initiative by identifying technologies suitable to meet specific facility D and D requirements, assessing the readiness of those technologies for field deployment, and conducting technology demonstrations of selected technologies at FIU-ARC facilities in Miami, Florida. To meet the technology gap challenge for a technology to remotely apply strippable/fixative coatings, FIU-ARC identified and demonstrated of a remote fixative sprayer platform. During this process, FIU-ARC worked closely with the Oak Ridge National Laboratory in the selection of typical fixatives and in the design of a hot cell mockup facility for demonstrations at FIUARC. For this demonstration and for future demonstrations, FIU-ARC built a hot cell mockup facility at the FIU-ARC Technology Demonstration/Evaluation site in Miami, Florida. FIU-ARC selected the International Climbing Machines' (ICM's) Robotic Climber to perform this technology demonstration. The selected technology was demonstrated at the hot cell mockup facility at FIU-ARC during the week of November 10, 2008. Fixative products typically used inside hot cells were investigated and selected for this remote application. The fixatives tested included Sherwin Williams' Promar 200 and DTM paints and Bartlett's Polymeric Barrier System (PBS). The technology evaluation documented the ability of the remote system to spray fixative products on horizontal and vertical concrete surfaces. The technology performance, cost, and health and safety issues were evaluated

  16. 29 March 2012 - Austrian Niederösterreich Governor E. Pröll with Klubobmann and Chairman of EBG MedAustron GmbH Council K. Schneeberger, Director General for Cultural Policy Amabssador M.Eichtinger and Permanent Representative of Austria to the UNO and Austrian Delegate to CERN Council Ambassador C. Strohal in the MedAustron facility at CERN building 184.

    CERN Multimedia

    Jean-Claude Gadmer

    2012-01-01

    CERN-HI-1203078 01 - 13: visit of LINAC 3 with M. Benedikt CERN-HI-1203078 14 - 20: in the Roy Billinge room CERN-HI-1203078 21- 22: visit of the LEIR accelerator in building 354 CERN-HI-1203078 23 - 55: signing the guest book with CERN Director-General R. Heuer and Head of International Relations F. Pauss CERN-HI-1203078 56 - 99: in building 184, Governor Pröll and CERN Director-General R. Heuer switch on the MedAustron ion source to produce the proton beam; visit MedAustron facility. CERN-HI-1203078 32:from left to right: Klubobmann and Chairman of EBG MedAustron GmbH Council K. Schneeberger; Director-General R. Heuer;Niederösterreich Governor E. Pröll;Head of International Relations F. Pauss;Permanent Representative of Austria to the UNO and Austrian Delegate to CERN Council Ambassador C. Strohal.

  17. Ethical perspectives on emerging assistive technologies: insights from focus groups with stakeholders in long-term care facilities.

    Science.gov (United States)

    Dorsten, Aimee-Marie; Sifford, K Susan; Bharucha, Ashok; Mecca, Laurel Person; Wactlar, Howard

    2009-03-01

    ASSISTIVE TECHNOLOGIES ARE RELATIVELY novel tools for research and daily care in long-term care (LTC) facilities that are faced with the burgeoning of the older adult population and dwindling staffing resources. The degree to which stakeholders in LTC facilities are receptive to the use of these technologies is poorly understood. Eighteen semi-structured focus groups and one interview were conducted with relevant groups of stakeholders at seven LTC facilities in southwestern Pennsylvania. Common themes identified across all focus groups centered on concerns for privacy, autonomy, cost, and safety associated with implementation of novel technologies. The relative importance of each theme varied by stakeholder group as well as the perceived severity of cognitive and/or physical disability. Our findings suggest that ethical issues are critical to acceptance of novel technologies by their end users, and that stakeholder groups are interdependent and require shared communication about the acceptance of these emerging technologies.

  18. A Laser Technology Test Facility for Laser Inertial Fusion Energy (LIFE)

    International Nuclear Information System (INIS)

    Bayramian, A.J.; Campbell, R.W.; Ebbers, C.A.; Freitas, B.L.; Latkowski, J.; Molander, W.A.; Sutton, S.B.; Telford, S.; Caird, J.A.

    2010-01-01

    A LIFE laser driver needs to be designed and operated which meets the rigorous requirements of the NIF laser system while operating at high average power, and operate for a lifetime of >30 years. Ignition on NIF will serve to demonstrate laser driver functionality, operation of the Mercury laser system at LLNL demonstrates the ability of a diode-pumped solid-state laser to run at high average power, but the operational lifetime >30 yrs remains to be proven. A Laser Technology test Facility (LTF) has been designed to specifically address this issue. The LTF is a 100-Hz diode-pumped solid-state laser system intended for accelerated testing of the diodes, gain media, optics, frequency converters and final optics, providing system statistics for billion shot class tests. These statistics will be utilized for material and technology development as well as economic and reliability models for LIFE laser drivers.

  19. News from Council - September 2016

    CERN Multimedia

    2016-01-01

    I would like to inform you of the main news from the Council this week. First of all, the Council congratulated CERN and the Collaborations on the superb performance of the accelerator complex and experiments. It has been a great year so far, with important physics results across the whole spectrum of the CERN research programme.   Looking forward, one of the main accomplishments from this week’s meetings is that the Council has approved the opening of a credit facility with the European Investment Bank (EIB) to cover the cash shortage during the peak years of the High-Luminosity LHC (HL-LHC) construction. This is very good news since it will allow us to carry out the work necessary for the HL-LHC without compromising the rest of the Laboratory’s scientific programme. Turning to the scientific and geographical enlargement, the Council approved the admission of India as an Associate Member State, and I very much hope that the agreement can be signed in the near future so that Indi...

  20. Profile and scientific production of the Brazilian Council for Scientific and Technological Development (CNPq) researchers in the field of Hematology/Oncology.

    Science.gov (United States)

    Oliveira, Maria Christina Lopes Araujo; Martelli, Daniella Reis; Quirino, Isabel Gomes; Colosimo, Enrico Antônio; Silva, Ana Cristina Simões e; Martelli Júnior, Hercílio; Oliveira, Eduardo Araujo de

    2014-01-01

    several studies have examined the academic production of the researchers at the CNPq, in several areas of knowledge. The aim of this study was to evaluate the scientific production of researchers in Hematology/Oncology who hold scientific productivity grants from the Brazilian Council for Scientific and Technological Development. the Academic CVs of 28 researchers in Hematology/Oncology with active grants in the three-year period from 2006 to 2008 were included in the analysis. The variables of interest were: institution, researchers' time after doctorate, tutoring of undergraduate students, masters and PhD degree, scientific production and its impact. from a total of 411 researchers in Medicine, 28 (7%) were identified as being in the area of Hematology/Oncology. There was a slight predominance of males (53.6%) and grant holders in category 1. Three Brazilian states are responsible for approximately 90% of the researchers: São Paulo (21,75%), Rio de Janeiro (3,11%), and Minas Gerais (2, 7%). During their academic careers, the researchers published 2,655 articles, with a median of 87 articles per researcher (IQR = 52 to 122). 65 and 78% of this total were indexed on the Web of Science and Scopus databases, respectively. The researchers received 14,247 citations on the WoS database with a median of 385 citations per researcher. The average number of citations per article was 8.2. in this investigation, it was noted that researchers in the field of Hematology/Oncology have a relevant scientific output from the point of view of quantity and quality compared to other medical specialties.

  1. Environmental Audit at Santa Barbara Operations, Special Technologies Laboratory, Remote Sensing Laboratory, North Las Vegas Facilities

    International Nuclear Information System (INIS)

    1991-03-01

    This report documents the results of the Environmental Audit of selected facilities under the jurisdiction of the DOE Nevada Operations Office (NV) that are operated by EG and G Energy Measurements, Incorporated (EG and G/EM). The facilities included in this Audit are those of Santa Barbara Operation (SBO) at Goleta, California; the Special Technologies Laboratory (STL) at Santa Barbara, California; and Las Vegas Area Operations (LVAO) including the Remote Sensing Laboratory (RSL) at Nellis Air Force Base in Nevada, and the North Las Vegas Facilities (NLVF) at North Las Vegas, Nevada. The Environmental Audit was conducted by the US Department of Energy's (DOE) Office of Environmental Audit, commencing on January 28, 1991 and ending on February 15, 1991. The scope of the Audit was comprehensive, addressing environmental activities in the technical areas of air, surface water/drinking water, groundwater, waste management, toxic and chemical materials, quality assurance, radiation, inactive waste sites, and environmental management. Also assessed was compliance with applicable Federal, state, and local regulations and requirements; internal operating requirements; DOE Orders; and best management practices. 8 tabs

  2. Assessment of technologies for hazardous waste site remediation: Non-treatment technologies and pilot scale facility implementation -- monitoring technology

    International Nuclear Information System (INIS)

    Johnson, H.R.; Overbey, W.K. Jr.; Molnar, D.L.

    1994-02-01

    The objective of this study was to investigate and evaluate existing proven technologies for the monitoring of hazardous waste sites during remediation activities and to protect the health and safety of all related entities while complying with government regulations. The study began with a literature search to determine manufacturers and related instrumentation which would be applicable to the most complex (in terms of toxicity and mediums affected) sites. Criteria for monitoring and analyses were established and a functional analysis was performed to select the most appropriate instrumentation available. Gas Chromatography/Mass Spectrometry is the most widely accepted method for generating quantitative data given the characterization of the Winfield site. Fourier Transform Infrared Spectroscopy, while not a new technology, has the distinct advantage of measuring simultaneously hundreds of gaseous pollutants which can also be sparged from water and this technology received the highest score as per the functional analysis. To protect workers and the public surrounding remediation sites which are known to contain VOCs, on site monitoring prior to, and during the excavation operations, is recommended until enough data are obtained to assess the health risks to workers. The conclusion of this study is to recommend evaluation of both the mobile GC/MS and FTIR systems simultaneously in identical operating conditions

  3. IFMIF (International Fusion Materials Irradiation Facility) key element technology phase task description

    Energy Technology Data Exchange (ETDEWEB)

    Ida, M.; Nakamura, H.; Sugimoto, M.; Yutani, T.; Takeuchi, H. [eds.] [Japan Atomic Energy Research Inst., Tokai Research Establishment, Fusion Neutron Laboratory, Tokai, Ibaraki (Japan)

    2000-08-01

    In 2000, a 3 year Key Element technology Phase (KEP) of the International Fusion Materials Irradiation Facility (IFMIF) has been initiated to reduce the key technology risk factors needed to achieve continuous wave (CW) beam with the desired current and energy and to reach the corresponding power handling capabilities in the liquid lithium target system. In the KEP, the IFMIF team (EU, Japan, Russian Federation, US) will perform required tasks. The contents of the tasks are described in the task description sheet. As the KEP tasks, the IFMIF team have proposed 27 tasks for Test Facilities, 12 tasks for Target, 26 tasks for Accelerator and 18 tasks for Design Integration. The task description by RF is not yet available. The task items and task descriptions may be added or revised with the progress of KEP activities. These task description sheets have been compiled in this report. After 3 years KEP, the results of the KEP tasks will be reviewed. Following the KEP, 3 years Engineering Validation Phase (EVP) will continue for IFMIF construction. (author)

  4. Information technology systems in public sector health facilities in developing countries: the case of South Africa

    Directory of Open Access Journals (Sweden)

    Cline Gregory B

    2013-01-01

    Full Text Available Abstract Background The public healthcare sector in developing countries faces many challenges including weak healthcare systems and under-resourced facilities that deliver poor outcomes relative to total healthcare expenditure. Global references demonstrate that information technology has the ability to assist in this regard through the automation of processes, thus reducing the inefficiencies of manually driven processes and lowering transaction costs. This study examines the impact of hospital information systems implementation on service delivery, user adoption and organisational culture within two hospital settings in South Africa. Methods Ninety-four interviews with doctors, nurses and hospital administrators were conducted in two public sector tertiary healthcare facilities (in two provinces to record end-user perceptions. Structured questionnaires were used to conduct the interviews with both qualitative and quantitative information. Results Noteworthy differences were observed among the three sample groups of doctors, nurses and administrators as well as between our two hospital groups. The impact of automation in terms of cost and strategic value in public sector hospitals is shown to have yielded positive outcomes with regard to patient experience, hospital staff workflow enhancements, and overall morale in the workplace. Conclusion The research provides insight into the reasons for investing in system automation, the associated outcomes, and organisational factors that impact the successful adoption of IT systems. In addition, it finds that sustainable success in these initiatives is as much a function of the technology as it is of the change management function that must accompany the system implementation.

  5. Information and Communication Technologies and Supply Chain in Facilities Management in Denmark

    DEFF Research Database (Denmark)

    Scupola, Ada; Anker Jensen, Per

    This report presents the results of a study of factors impacting Information and Communication Technology (ICT) adoption in the supply chain of Facilities Management (FM) in Denmark. The research questions addressed in this study are: What are the key factors that influence adoption and assimilat......This report presents the results of a study of factors impacting Information and Communication Technology (ICT) adoption in the supply chain of Facilities Management (FM) in Denmark. The research questions addressed in this study are: What are the key factors that influence adoption...... important organizational factors are better FM management decisions, better long term and short term planning and forecasting of FM resources, better overview and control over the budget and the activities that need to be done as well as bbetter service provided to the customers.  Among the organizational...... there are improve and control relationships with FM service provider, opportunity to offer single point of contact also in complicated bundled services, government regulation, and critical mass of users. Among the external barriers there are lack of collaboration among software providers, clients and users in order...

  6. Status of NIF mirror technologies for completion of the NIF facility

    International Nuclear Information System (INIS)

    Stolz, C.J.

    2008-01-01

    The 1600 mirrors required for the National Ignition Facility (NIF) are now coated with the last optics currently being installed. The combined surface area of the NIF mirrors is almost 450 square meters, roughly 3.4 times greater than the surface area of the two Keck primary mirrors. Additionally, the power handling specification of NIF mirrors is 19 orders of magnitude greater than that of the Keck mirrors. The NIF laser will be at least 40x greater energy than the previous LLNL fusion laser called NOVA. To manufacture these mirrors, a number of new technologies (electrolytic in-situ dressing, ion figuring, source stabilization) were used that were not available for previous fusion laser optics. Post deposition technologies designed to increase laser resistance (off-line laser conditioning, solarization, air knives) have also been utilized. This paper summarizes the differences in technologies used to manufacture NIF mirrors from those used for previous fusion lasers and examines potential future technologies that would enable higher fluence operations and extend lifetimes

  7. THE DEVELOPMENT OF COAL-BASED TECHNOLOGIES FOR DEPARTMENT OF DEFENSE FACILITIES

    Energy Technology Data Exchange (ETDEWEB)

    Bruce G. Miller; Sharon Falcone Miller; Sarma V. Pisupati; Chunshan Song; Ronald S. Wasco; Ronald T. Wincek; Xiaochun Xu; Alan W. Scaroni; Richard Hogg; Subhash Chander; M. Thaddeus Ityokumbul; Mark S. Klima; Peter T. Luckie; Adam Rose; Richard L. Gordon; Jeffrey Lazo; A. Michael Schaal

    2004-01-30

    The third phase of a three-phase project investigating the development of coal-based technologies for US Department of Defense (DOD) facilities was completed. The objectives of the project were to: decrease DOD's dependence on foreign oil and increase its use of coal; promote public and private sector deployment of technologies for utilizing coal-based fuels in oil-designed combustion equipment; and provide a continuing environment for research and development of coal-based fuel technologies for small-scale applications at a time when market conditions in the US are not favorable for the introduction of coal-fired equipment in the commercial and industrial capacity ranges. The Phase III activities were focused on evaluating deeply-cleaned coals as fuels for industrial boilers and investigating emissions control strategies for providing ultra-low emissions when firing coal-based fuels. This was addressed by performing coal beneficiation and preparation studies, and bench- to demonstration-scale emissions reduction studies. In addition, economic studies were conducted focused on determining cost and market penetration, selection of incentives, and regional economic impacts of coal-based technologies.

  8. Preoperational Subsurface Conditions at the Idaho Nuclear Technology and Engineering Center Service Waste Disposal Facility

    Energy Technology Data Exchange (ETDEWEB)

    Ansley, Shannon Leigh

    2002-02-01

    The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering and Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist.

  9. Preoperational Subsurface Conditions at the Idaho Nuclear Technology and Engineering Center Service Wastewater Discharge Facility; TOPICAL

    International Nuclear Information System (INIS)

    Ansley, Shannon L.

    2002-01-01

    The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering and Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist

  10. Preoperational Subsurface Conditions at the Idaho Nuclear Technology and Engineering Center Service Wastewater Discharge Facility

    International Nuclear Information System (INIS)

    Ansley, Shannon L.

    2002-01-01

    The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering and Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist

  11. Use of highly pressurized liquid nitrogen technology for concrete scabbling application at SICN nuclear facility - 59282

    International Nuclear Information System (INIS)

    Moggia, Fabrice; Vaudey, Claire-Emilie; Damerval, Frederique; Varet, Thierry; Toulemonde, Valerie; Richard, Frederic; Anderson, Gary

    2012-01-01

    The decommissioning process is a quite long and complicated stage who may take few years or decades to be achieved. Generally, this process involves the implementation of a large number of technologies dedicated to cutting and decontamination operations. Based on this finding, the Clean- Up Business Unit of AREVA with Air Liquide decided to start the development of a new technology based on the use of liquid nitrogen (-140 deg. C / 3500 bar). The NitroJet R process is a quite interesting and promising technology. It can be used, as we described in this document, for concrete scabbling operations but also for decontamination and cutting applications. The Clean-Up Business Unit, with its partner Air Liquide, realized a complete study of this technology including several tests and optimizations to be able to handle it in a nuclear environment. Thus, we did: - increase of the reliability of the machine, - nuclearization of the system (including the development of efficient shroud system and efficient HP pipes insulation); - development of a dedicated bearer for automatic configuration; - optimization of parameters for D and D applications. As we already mentioned, NitroJet R technology showed promising perspectives as: - economic: increase of rate processing, decrease in site monitoring costs, - environmental: use of an inert gas, no secondary waste generation, non use of chemical, dry process, - social: less strenuous work, decrease of operator dosimetry compatible with ALARA principle The future for the NitroJet R technology will be its implementation in a real high level activity environment. This process will be used in spring 2012 in AREVA nuclear reprocessing facility of La Hague (France) to accomplish concrete scabbling applications. This test will be the last of a long development period before industrial exploitation. (authors)

  12. Remote mixed oxide fabrication facility development. Volume 2. State-of-the-art review of remote maintenance system technology

    International Nuclear Information System (INIS)

    Horgos, R.M.; Masch, M.L.

    1979-06-01

    This report provides a state-of-the-art review of remote systems technology, which includes manipulators, process connectors, vision systems and specialized process systems. A proposed mixed oxide fuel fabrication facility was reviewed and evaluated for identification of major remote maintenance and repair tasks. The technological areas were evaluated on the basis of their suitability or applicability for remote maintenance and repair of a proposed fully remote operating mixed oxide fuel fabrication facility. A technological base exists from which the design criteria for a reliable, remote operating facility can be established. Commercially available systems and components, along with those remote technologies now in development, will require modifications to adapt them to specific plant designs and requirements

  13. Federal/State cooperation in the licensing of a nuclear power project. A joint licensing process between the US Nuclear Regulatory Commission and the Washington State Energy Facility Site Evaluation Council

    International Nuclear Information System (INIS)

    1984-05-01

    This report summarizes and documents a joint environmental review and licensing process established between the US Nuclear Regulatory Commission (NRC) and the Washington State Energy Facility Site Evaluation Council (EFSEC) in 1980-1983 for the Skagit/Hanford Nuclear Project (S/HNP). It documents the agreements made between the agencies to prepare a joint environmental impact statement responsive to the requirements of the National Environmental Policy Act of 1969 (NEPA) and the Washington State Environmental Policy Act. These agreements also established protocol to conduct joint public evidentiary hearings on matters of mutual jurisdiction, thereby reducing the duplication of effort and increasing the efficiency of the use of resources of federal and state governments and other entities involved in the process. This report may provide guidance and rationale to licensing bodies that may wish to adopt some of the procedures discussed in the report in the event that they become involved in the licensing of a nuclear power plant project. The history of the S/HNP and of the agreement processes are discussed. Discussions are provided on implementing the joint review process. A separate section is included which presents independent evaluations of the process by the applicant, NRC, and EFSEC

  14. Nuclear material facilities - security systems and technology R and D trends

    International Nuclear Information System (INIS)

    Ellis, D.; Steele, B.

    2002-01-01

    Full text: In the US, physical security research and development (R and D) during the 1970s and 1980s created a body of technology and systems engineering that largely defined the industry for several decades. However, despite today's terrorists threats and risks, the overall funding of new and innovative physical security solutions is relatively very small. Such factors constraining physical security R and D include the expansion of overall security responsibilities, the emphasis on programmatic and business performance, in addition to evolving (mis)perceptions that 'the problem has been solved' or that 'anyone can do security'. Underlying these factors, the lack of robust standards and certifications has limited the development and application of physical security products, systems, and services. The research and development of new security technologies must be evaluated against very demanding constraints - including costs/benefits, emerging threats, and policies. Going forward, the goal will be to create a more comprehensive approach to physical security of nuclear material facilities that matches evolving threats and that will complement the transition to an integrated security/operations management environment. Such a management model evaluates the additional value of increasing security alternatives in addition to determining trade-offs between the programmatic mission and security issues. Correspondingly, more explicit and strategically useful measures must be developed to determine importance that, in turn, will influence security-related R and D efforts. The research and development of security technologies should be based upon identified needs and requirements resulting from a systematic analysis of the threat and other conditions. In particular, security technologies and systems must be evaluated in terms of current and long-term impacts. Such needs are (will be) diverse and will depend upon sustained research investments in a broad range of technologies

  15. A State-of-the-Art Report on Technologies of a Safety Assessment and a Radioactivity Exposure Assessment for the Decommissioning Process of Nuclear Facilities

    International Nuclear Information System (INIS)

    Jeong, Kwan Seong; Kang, Young Ae; Lee, Dong Gyu; Lee, Kune Woo; Jung, Chong Hun

    2007-09-01

    This report is to provide the reference contents of research and development for technologies of radioactivity exposure and safety assessment for development of the decommissioning technology for nuclear facilities. This report consists of as follows: - Analyzing and discussing on state-of-the-art technologies of a radioactivity exposure assessment of a decommissioning for nuclear facilities - Analyzing and discussing on state-of-the-art technologies of a safety assessment of a decommissioning for nuclear facilities

  16. A State-of-the-Art Report on Technologies of a Safety Assessment and a Radioactivity Exposure Assessment for the Decommissioning Process of Nuclear Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Kwan Seong; Kang, Young Ae; Lee, Dong Gyu; Lee, Kune Woo; Jung, Chong Hun

    2007-09-15

    This report is to provide the reference contents of research and development for technologies of radioactivity exposure and safety assessment for development of the decommissioning technology for nuclear facilities. This report consists of as follows: - Analyzing and discussing on state-of-the-art technologies of a radioactivity exposure assessment of a decommissioning for nuclear facilities - Analyzing and discussing on state-of-the-art technologies of a safety assessment of a decommissioning for nuclear facilities.

  17. Role of information and communication technology in promoting oral health at residential aged care facilities.

    Science.gov (United States)

    Adebayo, Bola; Durey, Angela; Slack-Smith, Linda M

    2017-07-01

    Information and communication technology (ICT) can provide knowledge and clinical support to those working in residential aged care facilities (RACFs). This paper aims to: (1) review literature on ICT targeted at residents, staff and external providers in RACFs including general practitioners, dental and allied health professionals on improving residents' oral health; (2) identify barriers and enablers to using ICT in promoting oral health at RACFs; and (3) investigate evidence of effectiveness of these approaches in promoting oral health. Findings from this narrative literature review indicate that ICT is not widely used in RACFs, with barriers to usage identified as limited training for staff, difficulties accessing the Internet, limited computer literacy particularly in older staff, cost and competing work demands. Residents also faced barriers including impaired cognitive and psychosocial functioning, limited computer literacy and Internet use. Findings suggest that more education and training in ICT to upskill staff and residents is needed to effectively promote oral health through this medium.

  18. Experimental investigations of the accelerator-driven transmutation technologies at the subcritical facility ''Yalina''

    International Nuclear Information System (INIS)

    Chigrinov, S.E.; Kiyavitskaya, H.I.; Serafimovich, I.G.; Rakhno, I.L.; Rutkovskaia, Ch.K.; Fokov, Y.; Khilmanovich, A.M.; Marstinkevich, B.A.; Bournos, V.V.; Korneev, S.V.; Mazanik, S.E.; Kulikovskaya, A.V.; Korbut, T.P.; Voropaj, N.K.; Zhouk, I.V.; Kievec, M.K.

    2002-01-01

    The investigations on accelerator-driven transmutation technologies (ADTT) focus on the reduction of the amount of long-lived wastes and the physics of a subcritical system driven with an external neutron source. This paper presents the experimental facility 'Yalina' which was designed and created at the Radiation Physics and Chemistry Problems Institute of the National Academy of Sciences of Belarus in the framework of the ISTC project no. B-070 to study the peculiarities of ADTT in thermal spectrum. A detailed description of the assembly, neutron generator and a preliminary analysis of some calculated and experimental data (multiplication factor, neutron flux density distribution in the assembly, transmutation rates of some long-lived fission products and minor actinides) are presented. (authors)

  19. A Distributed Simulation Facility to Support Human Factors Research in Advanced Air Transportation Technology

    Science.gov (United States)

    Amonlirdviman, Keith; Farley, Todd C.; Hansman, R. John, Jr.; Ladik, John F.; Sherer, Dana Z.

    1998-01-01

    A distributed real-time simulation of the civil air traffic environment developed to support human factors research in advanced air transportation technology is presented. The distributed environment is based on a custom simulation architecture designed for simplicity and flexibility in human experiments. Standard Internet protocols are used to create the distributed environment, linking all advanced cockpit simulator, all Air Traffic Control simulator, and a pseudo-aircraft control and simulation management station. The pseudo-aircraft control station also functions as a scenario design tool for coordinating human factors experiments. This station incorporates a pseudo-pilot interface designed to reduce workload for human operators piloting multiple aircraft simultaneously in real time. The application of this distributed simulation facility to support a study of the effect of shared information (via air-ground datalink) on pilot/controller shared situation awareness and re-route negotiation is also presented.

  20. National Ignition Facility quality assurance plan for laser materials and optical technology

    Energy Technology Data Exchange (ETDEWEB)

    Wolfe, C.R.

    1996-05-01

    Quality achievement is the responsibility of the line organizations of the National Ignition Facility (NIF) Project. This subtier Quality Assurance Plan (QAP) applies to activities of the Laser Materials & Optical Technology (LM&OT) organization and its subcontractors. It responds to the NIF Quality Assurance Program Plan (QAPP, L-15958-2, NIF-95-499) and Department of Energy (DOE) Order 5700.6C. This Plan is organized according to 10 Quality Assurance (QA) criteria and subelements of a management system as outlined in the NIF QAPP. This Plan describes how those QA requirements are met. This Plan is authorized by the Associate Project Leader for the LM&OT organization, who has assigned responsibility to the Optics QA engineer to maintain this plan, with the assistance of the NIF QA organization. This Plan governs quality-affecting activities associated with: design; procurement; fabrication; testing and acceptance; handling and storage; and installation of NIF Project optical components into mounts and subassemblies.

  1. Identifying concepts for studying implementation of information technology in facilities management

    DEFF Research Database (Denmark)

    Ebbesen, Poul; Bonke, Sten

    2014-01-01

    . Background: Experiences from the FM sector indicate that IT systems meant to support FM operations and workflows often do not generate the expected added value neither to the FM department itself nor to the basic organization supported by the FM department. Approach (Theory/Methodology): Based on findings......Purpose: To contribute to identifying a conceptual framework for describing and understanding the processes involved when implementing and using Information Technology (IT) in Facilities Management (FM). This paper discusses how basic concepts from different theories can be applied in parallel when...... from exciting research on IT implementation a range of more generic theoretical concepts applicable to the typical setting or situation of IT implementation in FM has been found. These theoretical concepts all clarify and describe different aspects of the implementation process and they may all...

  2. Development of corrective measures technology for shallow land burial facilities at arid sites

    International Nuclear Information System (INIS)

    Nyhan, J.W.; Abeele, W.V.; Perkins, B.A.; Lane, L.J.

    1984-01-01

    The field research program involving corrective measure technologies for arid shallow land burial (SLB) sites is described. Soil erosion and infiltration of water into a simulated trench cap with various surface treatments was measured and compared with similar data from agricultural systems across the United States. Field testing of biointrustion barriers at closed-out waste disposal sites at Los Alamos and in the experimental clusters are reported. The final results of an experiment designed to measure the extent of contaminant transport to the surface of a SLB facility, and the influence of plants on this relationship, are presented. An experiment designed to determine the effects of subsidence on the performance of a cobble-gravel biobarrier system is described and current field data are presented. 11 references, 11 figures, 5 tables

  3. Beam Position Monitor and Energy Analysis at the Fermilab Accelerator Science and Technology Facility

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, David Juarez [Univ. of Guanajuato (Mexico)

    2015-08-01

    Fermilab Accelerator Science and Technology Facility has produced its first beam with an energy of 20 MeV. This energy is obtained by the acceleration at the Electron Gun and the Capture Cavity 2 (CC2). When fully completed, the accelerator will consist of a photoinjector, one International Liner Collider (ILC)-type cryomodule, multiple accelerator R&D beamlines, and a downstream beamline to inject 300 MeV electrons into the Integrable Optics Test Accelerator (IOTA). We calculated the total energy of the beam and the corresponding energy to the Electron Gun and CC2. Subsequently, a Beam Position Monitors (BPM) error analysis was done, to calculate the device actual resolution.

  4. Enhancing Science Literacy and Art History Engagement at Princeton Through Collaboration Between the University Art Museum and the Council on Science and Technology

    Science.gov (United States)

    Riihimaki, C. A.; White, V. M.

    2016-12-01

    The importance of innovative science education for social science and humanities students is often under-appreciated by science departments, because these students typically do not take science courses beyond general education requirements, nor do they contribute to faculty research programs. However, these students are vitally important in society—for example as business leaders or consultants, and especially as voters. In these roles, they will be confronted with decisions related to science in their professional and personal lives. The Council on Science and Technology at Princeton University aims to fill this education gap by developing and supporting innovative programs that bring science to cross-disciplinary audiences. One of our most fruitful collaborations has been with the Princeton University Art Museum, which has an encyclopedic collection of over 92,000 works of art, ranging from antiquity to the contemporary. Our work includes 1) bringing introductory environmental science courses to the Museum to explore how original works of art of different ages can serve as paleo-environmental proxies, thereby providing a means for discussing broader concepts in development of proxies and validation of reconstructions; 2) sponsoring a panel aimed at the general public and composed of science faculty and art historians who discussed the scientific and art historical contexts behind Albert Bierstadt's Mount Adams, Washington, 1875 (oil on canvas, gift of Mrs. Jacob N. Beam, accession number y1940-430), including the landscape's subjects, materials, technique, and style; and 3) collaborating on an installation of photographs relevant to a freshman GIS course, with an essay about the artwork written by the students. This first-hand study of works of art encourages critical thinking and an empathetic approach to different historical periods and cultures, as well as to the environment. Our collaboration additionally provides an opportunity to engage more students in

  5. Environmental assessment report: Nuclear Test Technology Complex. [Construction and operation of proposed facility

    Energy Technology Data Exchange (ETDEWEB)

    Tonnessen, K.; Tewes, H.A.

    1982-08-01

    The US Department of Energy (USDOE) is planning to construct and operate a structure, designated the Nuclear Test Technology Complex (NTTC), on a site located west of and adjacent to the Lawrence Livermore National Laboratory. The NTTC is designed to house 350 nuclear test program personnel, and will accommodate the needs of the entire staff of the continuing Nuclear Test Program (NTP). The project has three phases: land acquisition, facility construction and facility operation. The purpose of this environmental assessment report is to describe the activities associated with the three phases of the NTTC project and to evaluate potential environmental disruptions. The project site is located in a rural area of southeastern Alameda County, California, where the primary land use is agriculture; however, the County has zoned the area for industrial development. The environmental impacts of the project include surface disturbance, high noise levels, possible increases in site erosion, and decreased air quality. These impacts will occur primarily during the construction phase of the NTTC project and can be mitigated in part by measures proposed in this report.

  6. Distribution and behavior of tritium in the Coolant-Salt Technology Facility

    International Nuclear Information System (INIS)

    Mays, G.T.; Smith, A.N.; Engel, J.R.

    1977-04-01

    A 1000-MW(e) Molten-Salt Breeder Reactor (MSBR) is expected to produce 2420 Ci/day of tritium. As much as 60 percent of the tritium produced may be transported to the reactor steam system (assuming no retention by the secondary coolant salt), where it would be released to the environment. Such a release rate would be unacceptable. Experiments were conducted in an engineering-scale facility--the Coolant-Salt Technology Facility (CSTF)--to examine the potential of sodium fluoroborate, the proposed coolant salt for an MSBR, for sequestering tritium. The salt was believed to contain chemical species capable of trapping tritium. A series of 5 experiments--3 transient and 2 steady-state experiments--was conducted from July of 1975 through June of 1976 where tritium was added to the CSTF. The CSTF circulated sodium fluoroborate at temperatures and pressures typical of MSBR operating conditions. Results from the experiments indicated that over 90 percent of tritium added at steady-state conditions was trapped by sodium fluoroborate and appeared in the off-gas system in a chemically combined (water-soluble) form and that a total of approximately 98 percent of the tritium added at steady-state conditions was removed through the off-gas system overall

  7. Advances in technology for the construction of deep-underground facilities

    Energy Technology Data Exchange (ETDEWEB)

    1987-12-31

    The workshop was organized in order to address technological issues important to decisions regarding the feasibility of strategic options. The objectives of the workshop were to establish the current technological capabilities for deep-underground construction, to project those capabilities through the compressed schedule proposed for construction, and to identify promising directions for timely allocation of existing research and development resources. The earth has been used as a means of protection and safekeeping for many centuries. Recently, the thickness of the earth cover required for this purpose has been extended to the 2,000- to 3,000-ft range in structures contemplated for nuclear-waste disposal, energy storage, and strategic systems. For defensive missile basing, it is now perceived that the magnitude of the threat has increased through better delivery systems, larger payloads, and variable tactics of attack. Thus, depths of 3,000 to 8,000 ft are being considered seriously for such facilities. Moreover, it appears desirable that the facilities be operational (if not totally complete) for defensive purposes within a five-year construction schedule. Deep excavations such as mines are similar in many respects to nearsurface tunnels and caverns for transit, rail, sewer, water, hydroelectric, and highway projects. But the differences that do exist are significant. Major distinctions between shallow and deep construction derive from the stress fields and behavior of earth materials around the openings. Different methodologies are required to accommodate other variations resulting from increased depth, such as elevated temperatures, reduced capability for site exploration, and limited access during project execution. This report addresses these and other questions devoted to geotechnical characterization, design, construction, and excavation equipment.

  8. Transfer of adapted water supply technologies through a demonstration and teaching facility

    Science.gov (United States)

    Nestmann, F.; Oberle, P.; Ikhwan, M.; Stoffel, D.; Blaß, H. J.; Töws, D.; Schmidt, S.

    2016-09-01

    Water scarcity can be defined as a lack of sufficient water resources or as the limited or even missing access to a safe water supply. Latter can be classified as `economic water scarcity' which among others can commonly be met in tropical and subtropical karst regions of emerging and developing countries. Karst aquifers, mostly consisting of limestone and carbonate rock, show high infiltration rates which leads to a lack of above ground storage possibilities. Thus, the water will drain rapidly into the underground and evolve vast river networks. Considering the lack of appropriate infrastructure and limited human capacities in the affected areas, these underground water resources cannot be exploited adequately. Against this, background innovative and adapted technologies are required to utilize hard-to-access water resources in a sustainable way. In this context, the German-Indonesian joint R&D project "Integrated Water Resources Management (IWRM) Indonesia" dealt with the development of highly adaptable water technologies and management strategies. Under the aegis of the Karlsruhe Institute of Technology (KIT) and funded by the German Ministry of Education and Research (BMBF), these innovative technical concepts were exemplarily implemented to remedy this deficiency in the model region Gunung Sewu, a karst area situated on the southern coast of Java Island, Indonesia. The experiences gained through the interdisciplinary joint R&D activities clearly showed that even in the case of availability of appropriate technologies, a comprising transfer of knowhow and the buildup of capabilities (Capacity Development) is inevitable to sustainably implement and disseminate new methods. In this context, an adapted water supply facility was developed by KIT which hereafter shall serve for demonstration, teaching, and research purposes. The plant's functionality, its teaching and research concept, as well as the design process, which was accomplished in collaboration with the

  9. R and D strategy on remote response technology for emergency situations of nuclear facilities in KAERI

    International Nuclear Information System (INIS)

    Jeong, Kyung Min; Cho, Jae Wan; Choi, Young Soo; Eom, Heung Seup; Seo, Yong Chil; Shin, Hoch Ul; Lee, Sung Uk; Kim, Chang Hoi; Jeong, Seung Ho; Kim, Seung Ho

    2012-01-01

    Generally speaking, robotic technologies are anticipated to be very useful for hazardous works in nuclear facilities because robotic systems are relatively immune to radiation exposure. But the application of robotic systems for such environments has not been increasing during past 20 years. Applying highly reliable and conservative 'defense in depth' concepts in the design and construction of NPPs, there is very little probability of accidents occurring or radioactive materials being released into the environments. As a precaution, however NPPs are prepared with emergency response procedures and routinely conduct exercises for post accident circumstances based on these procedures. The last year's accident at the Fukushima Daiichi nuclear power plant promotes the needs for remote response technologies based on mobile robotic system to recognize the internal status and mitigate the unanticipated events of nuclear power plants in emergency situations. For initial observation of reactor buildings two robots named 'PackBot' were used because the internal conditions were unknown so as to allow human workers for entrance into the reactor building. But there were severe limitations for the robots to perform the given tasks from various obstacles and poor visibility inside though they provided crucial information such as views of internal structures, dose level and temperature that supported the decision for human worker's entrance. The application of robots for emergency response tasks for post accidents in nuclear facilities is not a new concept. Robots were sent to recover the damaged reactor at Chernobyl where human workers could have received a lifetime dose of radiation in minutes. Based on NRC's TMI 2 Cleanup Program, several robots were built in the 1980s to help gather information and remove debris from a reactor at the Three Mile Island nuclear power plant that partially melted down in 1979. A robot was used for several years equipped with various tools allowing

  10. R and D strategy on remote response technology for emergency situations of nuclear facilities in KAERI

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Kyung Min; Cho, Jae Wan; Choi, Young Soo; Eom, Heung Seup; Seo, Yong Chil; Shin, Hoch Ul; Lee, Sung Uk; Kim, Chang Hoi; Jeong, Seung Ho; Kim, Seung Ho [KAERI, Daejeon (Korea, Republic of)

    2012-10-15

    Generally speaking, robotic technologies are anticipated to be very useful for hazardous works in nuclear facilities because robotic systems are relatively immune to radiation exposure. But the application of robotic systems for such environments has not been increasing during past 20 years. Applying highly reliable and conservative 'defense in depth' concepts in the design and construction of NPPs, there is very little probability of accidents occurring or radioactive materials being released into the environments. As a precaution, however NPPs are prepared with emergency response procedures and routinely conduct exercises for post accident circumstances based on these procedures. The last year's accident at the Fukushima Daiichi nuclear power plant promotes the needs for remote response technologies based on mobile robotic system to recognize the internal status and mitigate the unanticipated events of nuclear power plants in emergency situations. For initial observation of reactor buildings two robots named 'PackBot' were used because the internal conditions were unknown so as to allow human workers for entrance into the reactor building. But there were severe limitations for the robots to perform the given tasks from various obstacles and poor visibility inside though they provided crucial information such as views of internal structures, dose level and temperature that supported the decision for human worker's entrance. The application of robots for emergency response tasks for post accidents in nuclear facilities is not a new concept. Robots were sent to recover the damaged reactor at Chernobyl where human workers could have received a lifetime dose of radiation in minutes. Based on NRC's TMI 2 Cleanup Program, several robots were built in the 1980s to help gather information and remove debris from a reactor at the Three Mile Island nuclear power plant that partially melted down in 1979. A robot was used for several years

  11. Development of 3D Visualization Technology for Medium-and Large-sized Radioactive Metal Wastes from Decommissioning Nuclear Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Lee, A Rim; Park, Chan Hee; Lee, Jung Min; Kim, Rinah; Moon, Joo Hyun [Dongguk Univ., Gyongju (Korea, Republic of)

    2013-10-15

    The most important point of decommissioning nuclear facilities and nuclear power plants is to spend less money and do this process safely. In order to perform a better decommissioning nuclear facilities and nuclear power plants, a data base of radioactive waste from decontamination and decommissioning of nuclear facilities should be constructed. This data base is described herein, from the radioactive nuclide to the shape of component of nuclear facilities, and representative results of the status and analysis are presented. With the increase in number of nuclear facilities at the end of their useful life, the demand of decommissioning technologies will continue to grow for years to come. This analysis of medium-and large-sized radioactive metal wastes and 3D visualization technology of the radioactive metal wastes using the 3D-SCAN are planned to be used for constructing data bases. The data bases are expected to be used on development of the basic technologies for decommissioning nuclear facilities 4 session.

  12. Workshop on CEBAF [Continuous Electron Beam Accelerator Facility] spectrometer magnet design and technology: Proceedings

    International Nuclear Information System (INIS)

    1986-09-01

    The planned experimental program at CEBAF includes high-resolution, large acceptance spectrometers and a large toroidal magnetic, detector. In order to take full advantage of the high quality beam characteristics, the performances required will make these devices quite unique instruments compared to existing facilities in the same energy range. Preliminary designs have shown that such performances can be reached, but key questions concerning design concepts and most appropriate and cost-effective technologies had to be answered before going further with the designs. It was the purpose of the Workshop on CEBAF Spectrometer Magnet Design and Technology, organized by the CEBAF Research and Engineering Divisions, to provide the most complete information about the state-of-the-art tools and techniques in magnet design and construction and to discuss the ones most appropriate to the CEBAF spectrometers. In addition, it is expected that this Workshop will be the staring point for further interactions and collaborations between international magnet experts and the CEBAF staff, during the whole process of designing and building the spectrometers

  13. Person-centered care and engagement via technology of residents with dementia in aged care facilities.

    Science.gov (United States)

    Goh, Anita M Y; Loi, Samantha M; Westphal, Alissa; Lautenschlager, Nicola T

    2017-12-01

    Touchscreen technology (TT) is a resource that can improve the quality of life of residents with dementia, and care staff, in residential aged care facilities (RACF) through a person-centered care approach. To enable the use of TTs to engage and benefit people with dementia in RACFs, education is needed to explore how these devices may be used, what facilitates use, and how to address barriers. We sought to provide education and explore RACF staff views and barriers on using TT to engage their residents with dementia. An educational session on using TT with residents with dementia was given to staff from three long-term RACFs in Melbourne, Australia. A cross-sectional convenience sample of 17 staff members (personal care attendants, registered nurses, enrolled nurses, allied health clinicians, and domestic staff) who attended were administered questionnaires pre- and post-sessions. As a result of the education seminar, they were significantly more confident in their ability to use TT devices with residents. TT, and education to staff about its use with residents with dementia, is a useful strategy to enhance RACF staff knowledge and confidence, thereby enhancing the use of technology in RACFs in order to improve care standards in people with dementia.

  14. Smart facility location planning for Smart Cities: using GIS technology and facility provision standards for pro-active planning of social facilities to support smart growth

    CSIR Research Space (South Africa)

    Green, Chéri

    2016-08-01

    Full Text Available step toward “smart” planning processes to support smart cities of the future. A case study application in Cape Town is used to illustrate the application of the methodology of spatially matching supply and demand for facilities using GIS tools...

  15. Prospective Teachers’ Tendencies to Utilize From the Facilities of Contemporary Educational Technology

    Directory of Open Access Journals (Sweden)

    Gizem SAYGILI

    2016-07-01

    Full Text Available In terms of effectiveness and efficiency, it is important to determine the views of prospective teachers related to taking advantage of the facilities of contemporary educational technology. This study which aims to identify prospective teachers’ attitudes towards computer-assisted learning was conducted with 140 prospective teachers (86 female, 54 male who have been attending pedagogical formation education at Süleyman Demirel University in the 2013 academic year. In this study, in eight different fields of prospective teachers' attitudes towards computer assisted education were examined with different variables such as gender, major and graduation year. As a data collection tool, the "Computer Assisted Education Attitude Scale" was used in order to determine the tendencies of prospective teachers towards the use of computer-assisted learning in different fields such as physical sciences, social sciences, health sciences, fine arts, theology, mathematics and Turkish language. In the statistical analysis, frequency analysis, descriptive statistics, nonparametric statistical technics were used. As a result of the analysis it was identified that teachers participating our study exhibited substandard attitudes towards computer-assisted education. In computer-assisted education, female prospective teachers had higher attitude level than men prospective teachers. In addition, attitude scores of participants of mathematics, health sciences, fine arts and science was higher than the participants of the Turkish language, foreign languages, social sciences and theology departments. There were statistically significant difference between attitude scores of participants of different disciplines. Results of the research findings are expected to contribute to the widespread use of instructional technology, and are expected to lead to applications in other fields.Keywords: Teaching Profession, Education, Technology, Computer-Assisted Education, Attitude

  16. A Measurement Management Technology for Improving Energy Efficiency in Data Centers and Telecommunication Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Hendrik Hamann, Levente Klein

    2012-06-28

    Data center (DC) electricity use is increasing at an annual rate of over 20% and presents a concern for the Information Technology (IT) industry, governments, and the society. A large fraction of the energy use is consumed by the compressor cooling to maintain the recommended operating conditions for IT equipment. The most common way to improve the DC efficiency is achieved by optimally provisioning the cooling power to match the global heat dissipation in the DC. However, at a more granular level, the large range of heat densities of today's IT equipment makes the task of provisioning cooling power optimized to the level of individual computer room air conditioning (CRAC) units much more challenging. Distributed sensing within a DC enables the development of new strategies to improve energy efficiency, such as hot spot elimination through targeted cooling, matching power consumption at rack level with workload schedule, and minimizing power losses. The scope of Measurement and Management Technologies (MMT) is to develop a software tool and the underlying sensing technology to provide critical decision support and control for DC and telecommunication facilities (TF) operations. A key aspect of MMT technology is integration of modeling tools to understand how changes in one operational parameter affect the overall DC response. It is demonstrated that reduced ordered models for DC can generate, in less than 2 seconds computational time, a three dimensional thermal model in a 50 kft{sup 2} DC. This rapid modeling enables real time visualization of the DC conditions and enables 'what if' scenarios simulations to characterize response to 'disturbances'. One such example is thermal zone modeling that matches the cooling power to the heat generated at a local level by identifying DC zones cooled by a specific CRAC. Turning off a CRAC unit can be simulated to understand how the other CRAC utilization changes and how server temperature responds

  17. 76 FR 64111 - NASA Advisory Council; Meeting

    Science.gov (United States)

    2011-10-17

    ... agenda for the meeting will include reports from the Council Committees: --Aeronautics --Audit, Finance... --Information Technology Infrastructure --Science --Technology and Innovation The meeting will be open to the... affiliation (if applicable), to the GSFC Protective Services Division no later than the close of business on...

  18. Australia's role in the nuclear fuel cycle. A report to the Prime Minister by the Australian Science and Technology Council (ASTEC)

    International Nuclear Information System (INIS)

    1984-05-01

    Results of an inquiry which was initiatd by the Australian Government in Novembr 1983 and which examined Australia's nuclear safeguards arrangements, the opportunities for Australia to advance the cause of nuclear non-proliferation, the adequacy of existing technology for the handling and disposal of radioactive wastes and ways in which Australia can further contribute to the development of safe disposal methods are presented. The report is also known as the Slatyer Inquiry. The 25 recommendations cover: export of Australia's uranium; participation in disarmament and arms control negotiations; the non-provision of nuclear items to non-NPT states; proposals for nuclear weapons free zones; guidelines for the supply of nuclear items; physical protection of nuclear material; regulating the storage and use of sensitive nuclear material; minimising the numbers of facilities such as enrichment and reprocessing plants; Australian participation in the nuclear fuel cycle; supporting safeguards operations by providing resources to the IAEA; supporting the IAEA's Program of Technical Assistance and Co-operation; participation in the IAEA; implementation of safeguards agreements; physical protection of nuclear materials during shipment; publicising administrative arrangements of safeguards agreements; limitation of releases of radioactive effluents; disposal of low and intermediate level wastes; standards for radiation exposure associated with uranium mining and milling; safety and environmental monitoring aspects of uranium mining and milling; a registry of radioactive tailings and waste disposal sites; ocean dumping; research into HLW disposal; support for R and D on Synroc and guidelines for HLW disposal

  19. ITER council proceedings: 1996

    International Nuclear Information System (INIS)

    1997-01-01

    Records of the 10. ITER Council Meeting (IC-10), held on 26-27 July 1996, in St. Petersburg, Russia, and the 11. ITER Council Meeting (IC-11) held on 17-18 December 1996, in Tokyo, Japan, are presented, giving essential information on the evolution of the ITER Engineering Design Activities (EDA) and the cost review and safety analysis. Figs, tabs

  20. European works councils

    DEFF Research Database (Denmark)

    Knudsen, Herman Lyhne

    2004-01-01

    The theme addressed by this artcle is the opportunities for European Works Councils of gaining influence on corporate decisions in multinational companies.......The theme addressed by this artcle is the opportunities for European Works Councils of gaining influence on corporate decisions in multinational companies....

  1. ICT security- aspects important for nuclear facilities; Information and Communication Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Thunem, Atoosa P-J.

    2005-09-15

    Rapid application growth of complex Information and Communication Technologies (ICT) in every society and state infrastructure as well as industry has revealed vulnerabilities that eventually have given rise to serious security breaches. These vulnerabilities together with the course of the breaches from cause to consequence are gradually about to convince the field experts that ensuring the security of ICT-driven systems is no longer possible by only relying on the fundaments of computer science, IT, or telecommunications. Appropriating knowledge from other disciplines is not only beneficial, but indeed very necessary. At the same time, it is a common observation today that ICT-driven systems are used everywhere, from the nuclear, aviation, commerce and healthcare domains to camera-equipped web-enabled cellular phones. The increasing interdisciplinary and inter-sectoral aspects of ICT security worldwide have been providing updated and useful information to the nuclear domain, as one of the emerging users of ICT-driven systems. Nevertheless, such aspects have also contributed to new and complicated challenges, as ICT security for the nuclear domain is in a much more delicate manner than for any other domains related to the concept of safety, at least from the public standpoint. This report addresses some important aspects of ICT security that need to be considered at nuclear facilities. It deals with ICT security and the relationship between security and safety from a rather different perspective than usually observed and applied. The report especially highlights the influence on the security of ICT-driven systems by all other dependability factors, and on that basis suggests a framework for ICT security profiling, where several security profiles are assumed to be valid and used in parallel for each ICT-driven system, sub-system or unit at nuclear facilities. The report also covers a related research topic of the Halden Project with focus on cyber threats and

  2. Current developments of fuel fabrication technologies at the plutonium fuel production facility, PFPF

    International Nuclear Information System (INIS)

    Asakura, K.; Aono, S.; Yamaguchi, T.; Deguchi, M.

    2000-01-01

    The Japan Nuclear Cycle Development Institute, JNC, designed, constructed and has operated the Plutonium Fuel Production Facility, PFPF, at the JNC Tokai Works to supply MOX fuels to the proto-type Fast Breeder Reactor, FBR, 'MONJU' and the experimental FBR 'JOYO' with 5 tonMOX/year of fabrication capability. Reduction of personal radiation exposure to a large amount of plutonium is one of the most important subjects in the development of MOX fabrication facility on a large scale. As the solution of this issue, the PFPF has introduced automated and/or remote controlled equipment in conjunction with computer controlled operation scheme. The PFPF started its operation in 1988 with JOYO reload fuel fabrication and has demonstrated MOX fuel fabrication on a large scale through JOYO and MONJU fuel fabrication for this decade. Through these operations, it has become obvious that several numbers of equipment initially installed in the PFPF need improvements in their performance and maintenance for commercial utilization of plutonium in the future. Furthermore, fuel fabrication of low density MOX pellets adopted in the MONJU fuel required a complete inspection because of difficulties in pellet fabrication compared with high density pellet for JOYO. This paper describes new pressing equipment with a powder recovery system, and pellet finishing and inspection equipment which has multiple functions, such as grinding measurements of outer diameter and density, and inspection of appearance to improve efficiency in the pellet finishing and inspection steps. Another development of technology concerning an annular pellet and an innovative process for MOX fuel fabrication are also described in this paper. (author)

  3. The Annual Neutron School: Program and Facility for Nuclear Science and Technology

    International Nuclear Information System (INIS)

    Dingle, C.A.M.; Bautista, U.M.; Jecong, J.F.M.; Hila, F.C.; Astronomo, A.A.; Olivares, R.U.; Guillermo, N.R.D.; Ramo, M.E.S.K.V.; Saligan, P.P.

    2015-01-01

    The core realization of the mandate of the Philippine Nuclear Research Institute (PNRI) is the establishment and utilization of major nuclear facilities in lieu of the decommissioned research reactor. To address the need for manpower in the future, the applied physics research section (APRS) of the PNRI has initiated capacity building in the use and operation of small neutron sources which attempts to re-establish, develop and sustain expertise in nuclear science and technology. These activities have provided the theoretical and experimental training of young professionals and scientist of the institute which, consequently, resulted in the conceptualization of the Annual Neutron School (ANS).The ANS provides training and teaching environments for the young generation who will operate, utilize and regulate future nuclear facilities. More importantly, it demonstrates and presents the acquired knowledge and research outputs by the staff via “train a trainer” concept to an audience of junior undergraduate students. The successful implementation of the ANS has been participated by selected universities within Metro Manila and was able to train a number of students since its establishment in 2013. The program offers training, education, and R & D in the basic nuclear instrumentation and techniques which includes (1) characterization of different neutron sources – AmBe, PuBe and Cf-252; (2) development of Neutron Activation Analysis (NAA) technique using a portable neutron source for non-destructive elemental analysis; (3) utilization of MCNP (Monte Carlo N-Particle) code for verification of experimental data on neutron characterization, radiation dosimetry, detector design, calibration and efficiency and TRIGA fuel assembly configuration for sub-critical experiments. (author)

  4. ITER council proceedings: 1992

    International Nuclear Information System (INIS)

    1994-01-01

    At the signing of the ITER EDA Agreement on July, 1992, each of the Parties presented to the Director General the names of their designated members of the ITER Council. Upon receiving those names, the Director General stated that the ITER Engineering Design Activities were ''ready to begin''. The next step in this process was the convening of the first meeting of the ITER Council. The first meeting of the Council, held in Vienna, was opened by Director General Hans Blix. The second meeting was held in Moscow, the formal seat of the Council. This volume presents records of these first two Council meetings and, together with the previous volumes on the text of the Agreement and Protocol 1 and the preparations for their signing respectively, represents essential information on the evolution of the ITER EDA

  5. Meeting of the ITER Council

    International Nuclear Information System (INIS)

    Drew, M.

    2001-01-01

    Full text: A meeting of the ITER Council took place in Toronto, Canada, on 27-28 February 2001 (Canada participates in the ITER EDA as an associate of the EU Party). The delegations to the Council were led by Dr. U. Finzi, Principal Advisor in charge of Fusion R and D in the Directorate-General for Research of the European Commission, Mr. T. Sugawa, Deputy Director-General of the Research and Development Bureau of the Ministry of Education, Culture, Sport, Science and Technology of Japan, and Academician E. Velikhov, President of the RRC ''Kurchatov Institute''. The European delegation was joined by Canadian experts including a representative from the Canadian Department of Natural Resources. The Council heard presentations from Dr. H. Kishimoto on the successful completion of the Explorations concerning future joint implementation of ITER, and from Dr. J.-P. Rager on the ITER International Industry Liaison Meeting held in Toronto in November 2000. Having noted statements of Parties' status, in particular concerning the readiness to start negotiations and the progress toward site offers, the Council encouraged the Parties to pursue preparations toward future implementation of ITER along the general lines proposed in the Explorers' final report. The Council also noted the readiness the of the RF and EU Parties to instruct specified current JCT members to remain at their places of assignment after the end of the EDA, in preparation for a transition to the Co-ordinated Technical Activities foreseen as support to ITER negotiations. The Council was pleased to hear that meetings with the Director of the ITER Parties' Designated Safety Representatives had started, and commended the progress toward achieving timely licensing processes with a good common understanding. The Council noted with appreciation the Director's view that no difficulties of principle in the licensing approach had been identified during the informal discussions with the regulatory representatives and

  6. Analysis of Debris Trajectories at the Scaled Wind Farm Technology (SWiFT) Facility

    Energy Technology Data Exchange (ETDEWEB)

    White, Jonathan R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Burnett, Damon J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-01-01

    Sandia National Laboratories operates the Scaled Wind Farm Technology Facility (SWiFT) on behalf of the Department of Energy Wind and Water Power Technologies Office. An analysis was performed to evaluate the hazards associated with debris thrown from one of SWiFT’s operating wind turbines, assuming a catastrophic failure. A Monte Carlo analysis was conducted to assess the complex variable space associated with debris throw hazards that included wind speed, wind direction, azimuth and pitch angles of the blade, and percentage of the blade that was separated. In addition, a set of high fidelity explicit dynamic finite element simulations were performed to determine the threshold impact energy envelope for the turbine control building located on-site. Assuming that all of the layered, independent, passive and active engineered safety systems and administrative procedures failed (a 100% failure rate of the safety systems), the likelihood of the control building being struck was calculated to be less than 5/10,000 and ballistic simulations showed that the control building would not provide passive protection for the majority of impact scenarios. Although options exist to improve the ballistic resistance of the control building, the recommendation is not to pursue them because there is a low probability of strike and there is an equal likelihood personnel could be located at similar distances in other areas of the SWiFT facility which are not passively protected, while the turbines are operating. A fenced exclusion area has been created around the turbines which restricts access to the boundary of the 1/100 strike probability. The overall recommendation is to neither relocate nor improve passive protection of the control building as the turbine safety systems have been improved to have no less than two independent, redundant, high quality engineered safety systems. Considering this, in combination with a control building strike probability of less than 5/10,000, the

  7. US DOE surplus facilities management program (SFMP). International technology exchange activities

    International Nuclear Information System (INIS)

    Broderick, J.

    1986-01-01

    The Surplus Facilities Management Program is one of five remedial action programs established by the US Department of Energy (DOE) to eliminate potential hazards to the public and environment from radioactive contamination. These programs provide remedial actions at various facilities and sites previously used by the US Government in national atomic energy programs. Included are uranium ore milling sites, nuclear materials production plants, and research and development facilities. The DOE's five remedial action programs are: the Grand Junction Remedial Action Project; the Formerly Utilized Sites Remedial Action Project; the West Valley Demonstration Project; and the Surplus Facilities Management Program. The Surplus Facilities Management Program (SWMP) was established by DOE in 1978. There are presently over 300 shutdown facilities in the SFMP located at sites across the United States and in Puerto Rico. In some cases, remedial action involves decontaminating and releasing a facility for some other use. In other instances, facilities are completely demolished and removed from the site

  8. Report to Congress on innovative safety and security technology solutions for alternative transportation facilities

    Science.gov (United States)

    2017-05-01

    This research collected information on the frequency and impact of safety and security incidents (threats) at selected facilities and identified priority incidents at each facility. A customized all hazards approach was used to determine the ha...

  9. Influences of Inadequate Instructional Materials and Facilities in Teaching and Learning of Electrical/Electronics Technology Education Courses

    Science.gov (United States)

    Ogbu, James E.

    2015-01-01

    This study investigated the influences of inadequate instructional materials and facilities in the teaching and learning of electrical/electronics (E/E) technology education courses. The study was guided by two research questions and two null hypotheses which were tested at 0.05 level of significance. The design employed was descriptive survey…

  10. Study on the state-of-the-arts technologies and policy trends for the decommissioning of nuclear installations and facilities

    International Nuclear Information System (INIS)

    Jeong, G. J.; Park, J. H.; Jeong, U. S. and others

    2005-12-01

    D and D project of the nuclear facilities is now the one of the biggest projects among the nuclear ones in the world. The nuclear facilities have their unique characteristics so making preparations about technical research in advance is very important in economic side and worker's protection side. Especially, because workers have a high possibility to contact radioactive material directly, an automation technology and shielding technology for worker's protection as well as a system development which can perform D and D work efficiently are necessary for D and D project. The waste reduction technology development, D and D equipment development, container development, and the study related the establishment of the level of the release regulation for radioactive waste are also important. The purpose of this research is to grasp of the national and internal D and D status for the nuclear facilities and to estimate them so we expect to prevent the possibility of a tremendous economical loss as the initiative of the nuclear D and D market is lost due to not understand the situation about the status of the related technologies. And we also expect to practical use the accumulated experience to decommissioning facilities in North

  11. Sandia Wake Imaging System Field Test Report: 2015 Deployment at the Scaled Wind Farm Technology (SWiFT) Facility.

    Energy Technology Data Exchange (ETDEWEB)

    Naughton, Brian Thomas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Herges, Thomas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-10-01

    This report presents the objectives, configuration, procedures, reporting , roles , and responsibilities and subsequent results for the field demonstration of the Sandia Wake Imaging System (SWIS) at the Sandia Scaled Wind Farm Technology (SWiFT) facility near Lubbock, Texas in June and July 2015.

  12. Benefits and Barriers of Information and Communication Technologies Adoption in Facilities Management Services Supply Chain

    DEFF Research Database (Denmark)

    Scupola, Ada

      This paper presents the results of a study of factors impacting information and communication technology (ICT) adoption in the supply chain of facilities management services. The research questions addressed in this study are: What are the key factors that influence adoption and assimilation of...

  13. Experimental research subject and renovation of chemical processing facility (CPF) for advanced fast reactor fuel reprocessing technology development

    International Nuclear Information System (INIS)

    Koyama, Tomozo; Shinozaki, Tadahiro; Nomura, Kazunori; Koma, Yoshikazu; Miyachi, Shigehiko; Ichige, Yoshiaki; Kobayashi, Tsuguyuki; Nemoto, Shin-ichi

    2002-01-01

    In order to enhance economical efficiency, environmental impact and nuclear nonproliferation resistance, the Advanced Reprocessing Technology, such as simplification and optimization of process, and applicability evaluation of the innovative technology that was not adopted up to now, has been developed for the reprocessing of the irradiated fuel taken out from a fast reactor. Renovation of the hot cell interior equipments, establishment and updating of glove boxes, installation of various analytical equipments, etc. in the Chemical Processing Facility (CPF) was done to utilize the CPF more positivity which is the center of the experimental field, where actual fuel can be used, for research and development towards establishment of the Advanced Reprocessing Technology development. The hot trials using the irradiated fuel pins of the experimental fast reactor 'JOYO' for studies on improved aqueous reprocessing technology, MA separation technology, dry process technology, etc. are scheduled to be carried out with these new equipments. (author)

  14. Fusion technology development: role of fusion facility upgrades and fission test reactors

    International Nuclear Information System (INIS)

    Hsu, P.Y.; Deis, G.A.; Longhurst, G.R.; Miller, L.G.; Schmunk, R.E.

    1983-01-01

    The near term national fusion program is unlikely to follow the aggressive logic of the Fusion Engineering Act of 1980. Faced with level budgets, a large, new fusion facility with an engineering thrust is unlikely in the near future. Within the fusion community the idea of upgrading the existing machines (TFTR, MFTF-B) is being considered to partially mitigate the lack of a design data base to ready the nation to launch an aggressive, mission-oriented fusion program with the goal of power production. This paper examines the cost/benefit issues of using fusion upgrades to develop the technology data base which will be required to support the design and construction of the next generation of fusion machines. The extent of usefulness of the nation's fission test reactors will be examined vis-a-vis the mission of the fusion upgrades. The authors show that while fission neutrons will provide a useful test environment in terms of bulk heating and tritium breeding on a submodule scale, they can play only a supporting role in designing the integrated whole modules and systems to be used in a nuclear fusion machine

  15. National Ignition Facility quality assurance plan for laser materials and optical technology

    International Nuclear Information System (INIS)

    Wolfe, C.R.

    1996-05-01

    Quality achievement is the responsibility of the line organizations of the National Ignition Facility (NIF) Project. This subtier Quality Assurance Plan (QAP) applies to activities of the Laser Materials ampersand Optical Technology (LM ampersand OT) organization and its subcontractors. It responds to the NIF Quality Assurance Program Plan (QAPP, L-15958-2, NIF-95-499) and Department of Energy (DOE) Order 5700.6C. This Plan is organized according to 10 Quality Assurance (QA) criteria and subelements of a management system as outlined in the NIF QAPP. This Plan describes how those QA requirements are met. This Plan is authorized by the Associate Project Leader for the LM ampersand OT organization, who has assigned responsibility to the Optics QA engineer to maintain this plan, with the assistance of the NIF QA organization. This Plan governs quality-affecting activities associated with: design; procurement; fabrication; testing and acceptance; handling and storage; and installation of NIF Project optical components into mounts and subassemblies

  16. NFC like wireless technology for monitoring purposes in scientific/industrial facilities

    International Nuclear Information System (INIS)

    Badillo, I.; Eguiraun, M.; Jugo, J.

    2012-01-01

    Wireless technologies are becoming more and more used in large industrial and scientific facilities like particle accelerators for facilitating the monitoring and indeed sensing in these kind of large environments. Cabled equipment means little flexibility in placement and is very expensive in both money and effort whenever reorganization or new installation is needed. So, when cabling is not really needed for performance reasons wireless monitoring and control is a good option, due to the speed of implementation. There are several wireless flavors to choose, as Bluetooth, Zigbee, WiFi, etc. depending on the requirements of each specific application. In this work a wireless monitoring system for EPICS (Experimental and Industrial Control System) is presented. The desired control system variables are acquired over the network and published in a mobile device, allowing the operator to check process variables everywhere the signal spreads. In this approach, a Python based server will be continuously getting EPICS Process Variables via Channel Access protocol and sending them through a WiFi standard 802.11 network using ICE middle-ware. ICE is a tool-kit oriented to build distributed applications. Finally, the mobile device will read the data and show it to the operator. The security of the communication can be improved by means of a weak wireless signal, following the same idea as in Near Field Communication (NFC), but for more large distances. With this approach, local monitoring and control applications, as for example a vacuum control system for several pumps, are currently implemented. (authors)

  17. Fusion technology development: role of fusion facility upgrades and fission test reactors

    International Nuclear Information System (INIS)

    Hsu, P.Y.; Deis, G.A.; Miller, L.G.; Longhurst, G.R.; Schmunk, R.E.

    1983-01-01

    The near term national fusion program is unlikely to follow the aggressive logic of the Fusion Engineering Act of 1980. Faced with level budgets, a large, new fusion facility with an engineering thrust is unlikely in the near future. Within the fusion community the idea of upgrading the existing machines (TFTR, MFTF-B) is being considered to partially mitigate the lack of a design data base to ready the nation to launch an aggressive, mission-oriented fusion program with the goal of power production. This paper examines the cost/benefit issues of using fusion upgrades to develop the technology data base which will be required to support the design and construction of the next generation of fusion machines. The extent of usefulness of the nation's fission test reactors will be examined vis-a-vis the mission of the fusion upgrades. We will show that while fission neutrons will provide a useful test environment in terms of bulk heating and tritium breeding on a submodule scale, they can play only a supporting role in designing the integrated whole modules and systems to be used in a nuclear fusion machine

  18. Evaluation of environmental-control technologies for commercial nuclear fuel-conversion (UF6) facilities

    International Nuclear Information System (INIS)

    Perkins, B.L.

    1982-10-01

    At present in the United States, there are two commercial conversion facilities. These facilities process uranium concentrate into UF 6 for shipment to the enrichment facilities. One conversion facility uses a dry hydrofluor process, whereas the other facility uses a process known as the wet solvent extraction-fluorination process. Because of the different processes used in the two plants, waste characteristics, quantities, and treatment practices differ at each facility. Wastes and effluent streams contain impurities found in the concentrate (such as uranium daughters, vanadium, molybdenum, selenium, arsenic, and ammonia) and process chemicals used in the circuit (including fluorine, nitrogen, and hydrogen), as well as small quantities of uranium. Studies of suitable disposal options for the solid wastes and sludges generated at the facilities and the long-term effects of emissions to the ambient environment are needed. 30 figures, 34 tables

  19. ITER council proceedings: 2001

    International Nuclear Information System (INIS)

    2001-01-01

    Continuing the ITER EDA, two further ITER Council Meetings were held since the publication of ITER EDA documentation series no, 20, namely the ITER Council Meeting on 27-28 February 2001 in Toronto, and the ITER Council Meeting on 18-19 July in Vienna. That Meeting was the last one during the ITER EDA. This volume contains records of these Meetings, including: Records of decisions; List of attendees; ITER EDA status report; ITER EDA technical activities report; MAC report and advice; Final report of ITER EDA; and Press release

  20. Elections to Staff Council

    CERN Multimedia

    Saff Association

    2013-01-01

    2013 Elections to Staff Council   Vote! Make your voice heard and be many to elect the new Staff Council. More details on the elections can be found on the Staff Association web site (https://ap-vote.web.cern.ch/elections-2013).   Timetable elections Monday 28 October to Monday 11 November, 12:00 am voting Monday 18 and Monday 25 November, publication of the results in Echo Tuesday 19 November, Staff Association Assizes Tuesday 3 December, first meeting of the new Staff Council and election of the new Executive Committee The voting procedure is monitored by the Election Committee.

  1. Regulatory measures for occupational health monitoring in BARC facilities

    International Nuclear Information System (INIS)

    Rajdeep; Chattopadhyay, S.

    2017-01-01

    Bhabha Atomic Research Centre (BARC) is the premier organization actively engaged in the research and developmental activities related to nuclear science and technology for the benefit of society and the nation. BARC has various facilities like nuclear fuel fabrication facilities, research reactors, spent fuel storage facilities, nuclear fuel re-cycling facilities, radioactive waste management facilities, machining workshops and various Physics, Chemistry and Biological laboratories. In BARC, aspects related to Occupational Safety and Health (OSH) are given paramount importance. The issues related OSH are subjected to multi-tier review process. BARC Safety Council (BSC) is the apex committee in the three-tier safety and security review framework of BARC. BSC functions as regulatory body for BARC facilities. BSC is responsible for occupational safety and health of employees in BARC facilities

  2. In Brief: NASA Advisory Council structure

    Science.gov (United States)

    Showstack, Randy

    2009-11-01

    NASA Administrator Charles Bolden has added four new committees to the NASA Advisory Council in the areas of commercial space, education and public outreach, information technology infrastructure, and technology and innovation, the agency announced on 2 November. Other committees are in the areas of aeronautics; audit, finance, and analysis; exploration; science; and space operations. The council, which provides advice and makes recommendations to the administrator about agency programs, policies, plans, financial controls, and other matters, holds its next meeting on 18-19 February 2010. For more information, visit http://www.nasa.gov/offices/nac/home/index.html.

  3. Innovative and adaptive technologies in decommissioning of nuclear facilities. Final report of a coordinated research project 2004-2008

    International Nuclear Information System (INIS)

    2008-10-01

    There are dozens of old reactors and other nuclear facilities worldwide that are either being actively dismantled or are candidates for decommissioning in the near term. A significant proportion of these facilities are situated in Member States or institutions that do not have adequate expertise and technologies for planning and implementing state of the art decommissioning projects. The technology selection process is critical in that regard. The main objective of the IAEA technical activities on decommissioning is to promote the exchange of lessons learned in order to improve the technologies, thereby contributing to successful planning and implementation of decommissioning. This should be achieved through a better understanding of the decision making process in technology comparison and selection and relevant issues affecting the entire decommissioning process. The specific objectives of the Coordinated Research Project (CRP) on Innovative and Adaptive Technologies in Decommissioning of Nuclear Facilities include the following general aspects: (a) To establish methodologies and data needs for developing concepts and approaches relevant to technology comparison and selection in decommissioning; (b) To improve and expand the database on applications and performance of various types of decommissioning technologies; (c) To address specific issues for individual decommissioning technologies and generate data relevant to their comparison and selection. It is also expected that this project, and in particular the papers collected in this TECDOC, will draw Member States' attention to the practicality and achievability of timely planning and implementation of decommissioning, especially for many smaller projects. Concluding reports that summarized the work undertaken under the aegis of the CRP were presented at the third and final research coordination meeting held in Rez, Czech Republic, 3-7 December 2007, and collected in this technical publication. Operating

  4. Cutting and decontamination technologies for nuclear facility dismantling; Technologien zur Zerlegung und zur Dekontamination von kerntechnischen Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Huebner, Felix; Grone, Georg von; Schultmann, Frank

    2017-03-15

    The German Government's decision to phase-out nuclear power will lead to a substantial increase of the number of nuclear decommissioning and dismantling projects. The decommissioning of nuclear facilities must meet the requirements of the radiation protection ordinance. This study deals with the decontamination and dismantling technologies available to meet radiation protection requirements. The aim of this study is to determine the state of the art in the field of decommissioning and dismantling technologies. Furthermore, future trends in the development and application of such technologies should be identified. A detailed study of current literature provides an overview of established decommissioning technologies. Moreover, experts were consulted in order to facilitate a practical assessment. The experts' statements indicate that (apart from the chemical decontamination of the primary circuit) the use of mechanical methods is generally preferred. Abrasive methods are rated as particularly efficient. According to the experts, the development of new decontamination technologies may allow a more efficient decontamination. However, the success of a new technology will be subject to its application costs. Mechanical technologies are preferred for the dismantling of nuclear facilities. The band saw has been identified as a standard tool in nuclear dismantling. The survey has concluded that there is no need for new dismantling technologies. The potential lies in the optimization of existing processes and techniques. With regard to remotely operated systems, experts' opinions vary on whether the use of these systems will increase in future. Most areas inside a nuclear facility have low radiation levels that allow the use of human labour for the dismantling. However, there is a need for an improvement in the allocation and management of decommissioning projects.

  5. Small scale wind power harnessing in Colombian oil industry facilities: Wind resource and technology issues

    Energy Technology Data Exchange (ETDEWEB)

    Giraldo, Mauricio; Nieto, Cesar; Escudero, Ana C.; Cobos, Juan C.; Delgado, Fernando

    2010-07-01

    Full text: Looking to improve its national and international standing, Colombia's national oil company, Ecopetrol, has set its goal on becoming involved on the production of energy from multiple sources, most importantly, on having an important percentage of its installed capacity from renewable sources. Part of this effort entices the evaluation of wind power potential on its facilities, including production, transportation and administrative, as well as identifying those technologies most suitable for the specific conditions of an equatorial country such as Colombia. Due to the lack of adequate site information, the first step consisted in superimposing national data to the facilities map of the company; this allowed for the selection of the first set of potential sites. From this set, the terminal at Covenas-Sucre was selected taking into account not only wind resource, but ease of access and power needs, as well as having a more or less representative wind potential in comparison to the rest of the country. A weather station was then installed to monitor wind variables. Measurements taken showed high variations in wind direction, and relatively low velocity profiles, making most commercially available wind turbines difficult to implement. In light of the above, a series of iterative steps were taken, first considering a range of individual Vertical Axis Wind Turbines (VAWT), given their capacity to adapt to changing wind directions. However, wind speed variations proved to be a challenge for individual VAWT's, i.e. Darriues turbines do not work well with low wind speeds, and Savonius turbines are not efficient of high wind speeds. As a result, a combined Darrieus- Savonius VAWT was selected given the capacity to adapt to both wind regimes, while at the same time modifying the size and shape of the blades in order to adapt to the lower average wind speeds present at the site. The resulting prototype is currently under construction and is scheduled to

  6. The materials production and processing facility at the Spanish National Centre for fusion technologies (TechnoFusion)

    International Nuclear Information System (INIS)

    Munoz, A.; Monge, M.A.; Pareja, R.; Hernandez, M.T.; Jimenez-Rey, D.; Roman, R.; Gonzalez, M.; Garcia-Cortes, I.; Perlado, M.; Ibarra, A.

    2011-01-01

    In response to the urgent request from the EU Fusion Program, a new facility (TechnoFusion) for research and development of fusion materials has been planned with support from the Regional Government of Madrid and the Ministry of Science and Innovation of Spain. TechnoFusion, the National Centre for Fusion Technologies, aims screening different technologies relevant for ITER and DEMO environments while promoting the contribution of international companies and research groups into the Fusion Programme. For this purpose, the centre will be provided with a large number of unique facilities for the manufacture, testing (a triple-beam multi-ion irradiation, a plasma-wall interaction device, a remote handling for under ionizing radiation testing) and analysis of critical fusion materials. Particularly, the objectives, semi-industrial scale capabilities and present status of the TechnoFusion Materials Production and Processing (MPP) facility are presented. Previous studies revealed that the MPP facility will be a very promising infrastructure for the development of new materials and prototypes demanded by the fusion technology and therefore some of them will be here briefly summarized.

  7. The materials production and processing facility at the Spanish National Centre for fusion technologies (TechnoFusion)

    Energy Technology Data Exchange (ETDEWEB)

    Munoz, A., E-mail: rpp@fis.uc3m.es [Departamento de Fisica, UC3M, Avda de la Universidad 30, 28911 Leganes, Madrid (Spain); Monge, M.A.; Pareja, R. [Departamento de Fisica, UC3M, Avda de la Universidad 30, 28911 Leganes, Madrid (Spain); Hernandez, M.T. [LNF-CIEMAT, Avda, Complutense, 22, 28040 Madrid (Spain); Jimenez-Rey, D. [CMAM, UAM, C/Faraday 3, 28049, Madrid (Spain); Roman, R.; Gonzalez, M.; Garcia-Cortes, I. [LNF-CIEMAT, Avda, Complutense, 22, 28040 Madrid (Spain); Perlado, M. [IFN, ETSII, UPM, C/Jose Gutierrez Abascal, 2, 28006 Madrid (Spain); Ibarra, A. [LNF-CIEMAT, Avda, Complutense, 22, 28040 Madrid (Spain)

    2011-10-15

    In response to the urgent request from the EU Fusion Program, a new facility (TechnoFusion) for research and development of fusion materials has been planned with support from the Regional Government of Madrid and the Ministry of Science and Innovation of Spain. TechnoFusion, the National Centre for Fusion Technologies, aims screening different technologies relevant for ITER and DEMO environments while promoting the contribution of international companies and research groups into the Fusion Programme. For this purpose, the centre will be provided with a large number of unique facilities for the manufacture, testing (a triple-beam multi-ion irradiation, a plasma-wall interaction device, a remote handling for under ionizing radiation testing) and analysis of critical fusion materials. Particularly, the objectives, semi-industrial scale capabilities and present status of the TechnoFusion Materials Production and Processing (MPP) facility are presented. Previous studies revealed that the MPP facility will be a very promising infrastructure for the development of new materials and prototypes demanded by the fusion technology and therefore some of them will be here briefly summarized.

  8. Medicare Appeals Council Decisions

    Data.gov (United States)

    U.S. Department of Health & Human Services — Decisions of the Departmental Appeals Board's Medicare Appeals Council involving claims for entitlement to Medicare and individual claims for Medicare coverage and...

  9. Allegheny County Council Districts

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset portrays the boundaries of the County Council Districts in Allegheny County. The dataset is based on municipal boundaries and City of Pittsburgh ward...

  10. Research and development of power reactor technology supporting work, 3; Development of utility facility operation management technique

    Energy Technology Data Exchange (ETDEWEB)

    1990-03-01

    Demands on utility facilities for nuclear technology development are increasingly sophisticated and diversified. It is important to meet requirements of securing the reliability of utility supply and ensuring the safety of facility operation and maintenance by means of technical supporting, data supply and quick contingency responses. A New computer system to make practicable man-machine interface, real-time data acquisition and operation data centralization has been developed based on the knowledge. Obtained from data base information and operation experience for the purpose of operation efficiency and labor saving. (author).

  11. The technological study on the decommissioning of nuclear facility, etc. in the Tokai Research Establishment

    International Nuclear Information System (INIS)

    Tomii, Hiroyuki; Matsuo, Kiyoshi; Shiraishi, Kunio; Kato, Rokuro; Watabe, Kozou; Higashiyama, Yutaka; Nagane, Satoru

    2005-03-01

    Since JPDR is dismantled and is removed, in Tokai Research Establishment, Japan Atomic Energy Research Institute, the dismantling of nuclear facility which finished the mission, etc. is advanced. At present, nuclear facility as a dismantling object count the approximately 20 facilities, and decommissioning plan of these facilities becomes an important problem, when the decommissioning countermeasure is considered. However, decommissioning techniques in proportion to various nuclear facility, etc. are clearly, and it has not been determined. In this report, the technical consideration on decommissioning techniques of nuclear facility promoted on the basis of this experience in future, while until now decommissioning experience and technical knowledge are arranged, etc. was added in order to appropriately and surely carry out decommissioning techniques and legal procedures, etc. (author)

  12. ITER council proceedings: 1995

    International Nuclear Information System (INIS)

    1996-01-01

    Records of the 8. ITER Council Meeting (IC-8), held on 26-27 July 1995, in San Diego, USA, and the 9. ITER Council Meeting (IC-9) held on 12-13 December 1995, in Garching, Germany, are presented, giving essential information on the evolution of the ITER Engineering Design Activities (EDA) and the ITER Interim Design Report Package and Relevant Documents. Figs, tabs

  13. ITER council proceedings: 1998

    International Nuclear Information System (INIS)

    1999-01-01

    This volume contains documents of the 13th and the 14th ITER council meeting as well as of the 1st extraordinary ITER council meeting. Documents of the ITER meetings held in Vienna and Yokohama during 1998 are also included. The contents include an outline of the ITER objectives, the ITER parameters and design overview as well as operating scenarios and plasma performance. Furthermore, design features, safety and environmental characteristics are given

  14. News from Council

    CERN Multimedia

    2015-01-01

    Today concludes a very busy week for Council. As you’ll have seen from the press release this morning, Council elected a new President, who will take up his mandate on 1 January along with the new management team, which was also approved by Council yesterday.   You’ll find full details of the incoming Director-General’s management team and structures here. Completing the configuration for the immediate future, Council also approved the medium term plan, along with the budget for 2016. In other Council business, two complete applications for Associate Membership were discussed. Following an earlier letter, India’s complete application was received and considered by Council. Consequently, a fact-finding mission has been established to report back before the end of the year. A new application was also received from Azerbaijan, with a fact-finding mission to be established. India’s involvement with CERN goes back to the 1970s, and the country...

  15. Evaluating the Effectiveness of Wildlife Detection and Observation Technologies at a Solar Power Tower Facility.

    Science.gov (United States)

    Diehl, Robert H; Valdez, Ernest W; Preston, Todd M; Wellik, Michael J; Cryan, Paul M

    2016-01-01

    Solar power towers produce electrical energy from sunlight at an industrial scale. Little is known about the effects of this technology on flying animals and few methods exist for automatically detecting or observing wildlife at solar towers and other tall anthropogenic structures. Smoking objects are sometimes observed co-occurring with reflected, concentrated light ("solar flux") in the airspace around solar towers, but the identity and origins of such objects can be difficult to determine. In this observational pilot study at the world's largest solar tower facility, we assessed the efficacy of using radar, surveillance video, and insect trapping to detect and observe animals flying near the towers. During site visits in May and September 2014, we monitored the airspace surrounding towers and observed insects, birds, and bats under a variety of environmental and operational conditions. We detected and broadly differentiated animals or objects moving through the airspace generally using radar and near solar towers using several video imaging methods. Video revealed what appeared to be mostly small insects burning in the solar flux. Also, we occasionally detected birds flying in the solar flux but could not accurately identify birds to species or the types of insects and small objects composing the vast majority of smoking targets. Insect trapping on the ground was somewhat effective at sampling smaller insects around the tower, and presence and abundance of insects in the traps generally trended with radar and video observations. Traps did not tend to sample the larger insects we sometimes observed flying in the solar flux or found dead on the ground beneath the towers. Some of the methods we tested (e.g., video surveillance) could be further assessed and potentially used to automatically detect and observe flying animals in the vicinity of solar towers to advance understanding about their effects on wildlife.

  16. Applications of remote sensing and GIS technologies to wetland assessment and monitoring at a DOE facility

    International Nuclear Information System (INIS)

    Mackey, H.E.

    1993-01-01

    The Savannah River Site (SRS), a 777-km 2 site, located in the Upper Coastal Plain of South Carolina, was established in the early 1950s for the production of nuclear materials to support the defense needs of the United States. The SRS was closed to the public and shortly after its formation, much of the uplands and previous farmlands were planted to managed pine plantations for the US Department of Energy by the US Forest Service. More than 7500 hectares of wetlands, ranging from a large, 3000-hectare swamp, to extensive bottomland hardwood forests, to isolated upland Carolina bays, were present on the SRS at the time of its formation. During the subsequent 40-yr operation of the site, five stream systems and portions of the Savannah River swamp on the SRS were influenced by discharges of once-through cooling water from site operations. In addition, two large cooling lakes were constructed, Par Pond in 1958 and L Lake in 1985, to support reactor operations. Thus, the wetlands of the SRS have had a variety of influences, ranging from the protection afforded by the exclusion of the public from the site, past construction of major facilities, and discharges from site operations. Evaluation, assessment, and monitoring long-term changes to the extensive and varied wetlands of the SRS are formidable tasks. Archived remote sensing data of a variety of types, along with the advances in computer technologies that allow the integration of land-use/land-cover geographic information system (GIS) data layer and related GIS data bases, are providing the necessary tools and information to integrate wetlands protection and management into an effective operational environment

  17. Evaluating the effectiveness of wildlife detection and observation technologies at a solar power tower facility

    Science.gov (United States)

    Diehl, Robert H.; Valdez, Ernest W.; Preston, Todd M.; Wellik, Mike J.; Cryan, Paul

    2016-01-01

    Solar power towers produce electrical energy from sunlight at an industrial scale. Little is known about the effects of this technology on flying animals and few methods exist for automatically detecting or observing wildlife at solar towers and other tall anthropogenic structures. Smoking objects are sometimes observed co-occurring with reflected, concentrated light (“solar flux”) in the airspace around solar towers, but the identity and origins of such objects can be difficult to determine. In this observational pilot study at the world’s largest solar tower facility, we assessed the efficacy of using radar, surveillance video, and insect trapping to detect and observe animals flying near the towers. During site visits in May and September 2014, we monitored the airspace surrounding towers and observed insects, birds, and bats under a variety of environmental and operational conditions. We detected and broadly differentiated animals or objects moving through the airspace generally using radar and near solar towers using several video imaging methods. Video revealed what appeared to be mostly small insects burning in the solar flux. Also, we occasionally detected birds flying in the solar flux but could not accurately identify birds to species or the types of insects and small objects composing the vast majority of smoking targets. Insect trapping on the ground was somewhat effective at sampling smaller insects around the tower, and presence and abundance of insects in the traps generally trended with radar and video observations. Traps did not tend to sample the larger insects we sometimes observed flying in the solar flux or found dead on the ground beneath the towers. Some of the methods we tested (e.g., video surveillance) could be further assessed and potentially used to automatically detect and observe flying animals in the vicinity of solar towers to advance understanding about their effects on wildlife.

  18. Seismic technology of nuclear fuel cycle facilities: A view of BNFL's approach and methods

    International Nuclear Information System (INIS)

    Morris, I.R.

    2001-01-01

    The approach BNFL employs in the seismic qualification of its nuclear fuel cycle facilities is described in this paper. The overall seismic qualification process from design to installation and commissioning is considered. The approach for new facilities, such as the Sellafield Mixed Oxide Fuel Plant and Windscale Vitrification Plant Line 3 currently under construction, is examined. (author)

  19. Evaluation of environmental control technologies for commercial uranium nuclear fuel fabrication facilities

    International Nuclear Information System (INIS)

    Perkins, B.L.

    1983-01-01

    At present in the United States, there are seven commercial light-water reactor uranium fuel fabrication facilities. Effluent wastes from these facilities include uranium, nitrogen, fluorine, and organic-containing compounds. These effluents may be either discharged to the ambient environment, treated and recycled internally, stored or disposed of on-site, sent off-site for treatment and/or recovery, or sent off-site for disposal (including disposal in low-level waste burial sites). Quantities of waste generated and treatment techniques vary greatly depending on the facility and circuits used internally at the facility, though in general all the fluorine entering the facility as UF 6 is discharged as waste. Further studies to determine techniques and procedures that might minimize dose (ALARA) and to give data on possible long-term effects of effluent discharge and waste disposal are needed

  20. Conceptual design report for the spent fuel management technology research and test (SMATER) facility

    Energy Technology Data Exchange (ETDEWEB)

    Park, S W; Ro, S G; Lee, J S; Min, D K; Shin, Y J [Korea Atomic Energy Research Institute, Taejon (Korea)

    1998-10-01

    This study was intended to develop concept for a pilot-scale remote operation facility for longer term management of spent fuel and therefrom to provide technical requirement for later basic design of the facility. Main scope of work for the study was to revise the past (1990) conceptual design in functions, scale, hot cell layout etc. based on user requirements. Technical reference was made to the PKA facility in Germany, through collaboration with appropriate partner, to elaborate the design and requirements. The study was focused on establishing design criteria and conceptual design of the SMATER facility. The results of this study should be an essential and useful basis upon optimization for further work to basic design of the facility. (author). 17 figs., 12 tabs.

  1. REVIEW OF INDUSTRIES AND GOVERNMENT AGENCIES FOR TECHNOLOGIES APPLICABLE TO DEACTIVATION AND DECOMMISSIONING OF NUCLEAR WEAPONS FACILITIES

    Energy Technology Data Exchange (ETDEWEB)

    Reilkoff, T. E.; Hetland, M. D.; O' Leary, E. M.

    2002-02-25

    The Deactivation and Decommissioning Focus Area's (DDFA's) mission is to develop, demonstrate, and deploy improved deactivation and decommissioning (D&D) technologies. This mission requires that emphasis be continually placed on identifying technologies currently employed or under development in other nuclear as well as nonnuclear industries and government agencies. In support of DDFA efforts to clean up the U.S. Department of Energy's (DOE's) radiologically contaminated surplus facilities using technologies that improve worker safety, reduce costs, and accelerate cleanup schedules, a study was conducted to identify innovative technologies developed for use in nonnuclear arenas that are appropriate for D&D applications.

  2. Alternative disposal technologies for new low-level radioactive waste disposal/storage facilities at the Savannah River Plant

    International Nuclear Information System (INIS)

    Cook, J.R.

    1987-01-01

    A Draft Environmental Impact Statement for Waste Management Activities for groundwater protection has been prepared for the Savannah River Plant. Support documentation for the DEIS included an Environmental Information Document on new radioactive waste disposal and storage facilities in which possible alternative disposal technologies were examined in depth. Six technologies that would meet the needs of the Savannah River Plant that selected for description and analysis include near surface disposal, near surface disposal with exceptions, engineered storage, engineered disposal, vault disposal of untreated waste, and a combination of near surface disposal, engineered disposal, and engineered storage. 2 refs

  3. Biological restoration of major transportation facilities domestic demonstration and application project (DDAP): technology development at Sandia National Laboratories.

    Energy Technology Data Exchange (ETDEWEB)

    Ramsey, James L., Jr. (.,; .); Melton, Brad; Finley, Patrick; Brockman, John; Peyton, Chad E.; Tucker, Mark David; Einfeld, Wayne; Griffith, Richard O.; Brown, Gary Stephen; Lucero, Daniel A.; Betty, Rita G.; McKenna, Sean Andrew; Knowlton, Robert G.; Ho, Pauline

    2006-06-01

    The Bio-Restoration of Major Transportation Facilities Domestic Demonstration and Application Program (DDAP) is a designed to accelerate the restoration of transportation nodes following an attack with a biological warfare agent. This report documents the technology development work done at SNL for this DDAP, which include development of the BROOM tool, an investigation of surface sample collection efficiency, and a flow cytometry study of chlorine dioxide effects on Bacillus anthracis spore viability.

  4. Development of a spent fuel management technology research and test facility

    Energy Technology Data Exchange (ETDEWEB)

    Park, S W; Noh, S K; Lee, J S. and others

    1997-12-01

    This study was intended to develop concept for a pilot-scale remote operation facility for longer term management of spent fuel and therefrom to provide technical requirement for later basic design of the facility. Main scope of work for the study was to revise the past (1990) conceptual design in functions, scale, hot cell layout, etc. based on user requirements. Technical reference was made to the PKA facility in Germany, through collaboration with appropriate partner, to elaborate the design and requirements. A simulator of the conceptual design was also developed by use of virtual reality technique by 3-D computer graphics for equipment and building. (author). 18 tabs., 39 figs

  5. Survey of technology for decommissioning of nuclear fuel cycle facilities. 8. Remote handling and cutting techniques

    Energy Technology Data Exchange (ETDEWEB)

    Ogawa, Ryuichiro; Ishijima, Noboru [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center

    1999-03-01

    In nuclear fuel cycle facility decommissioning and refurbishment, the remote handling techniques such as dismantling, waste handling and decontamination are needed to reduce personnel radiation exposure. The survey research for the status of R and D activities on remote handling tools suitable for nuclear facilities in the world and domestic existing commercial cutting tools applicable to decommissioning of the facilities was conducted. In addition, the drive mechanism, sensing element and control system applicable to the remote handling devices were also surveyed. This report presents brief surveyed summaries. (H. Itami)

  6. Study on applying technology of utilizing long-term materials for corrosion facilities

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Chul; Park, Young Kyu; Baek, Soo Gon; Lee, Jong Sub [Korea Electric Power Research Institute, Taejon (Korea, Republic of); Park, Yong Soo [Yonsei University, Seoul (Korea, Republic of); Hwang, Won Suk [Inha University (Korea, Republic of); Song, Rhyo Seong [Hankuk Aviation, University (Korea, Republic of)

    1996-12-31

    Nowadays, as the pollution in seawater is escalating rapidly because of fast industrialization, corrosion rate and repairing frequency of seawater facilities in power plant are increasing. In addition, new construction is restricted with narrow limits due to the deterioration of social condition, asking for extension of facility life and repairing frequency. The objectives of this study are to select the appropriate new high corrosion resistance materials and apply them in the field, to make the corrosion data base in accordance with their usage conditions and to predict the remaining life and optimum repairing period by predicting the life of facilities. (author). 77 refs., 54 figs.

  7. A report from Council

    CERN Multimedia

    2014-01-01

    The June meeting of Council is always a very busy one, having approval of the next year’s budget and the MTP as fixed agenda points. This year in addition, we had discussions on enlargement, as well as on the pension fund. I’d like to use this message to bring you up to date on all of those matters.   I’ll begin with the good news that the 2015 budget and MTP were recommended for approval by Finance Committee on Wednesday, and approved by Council on Thursday. This is extremely good news, and a solid vote of confidence from Council in the current economic situation. Coupled with that, I am pleased to report that at the half way stage of 2014, some 89% of budget contributions for the year have been received. Turning now to enlargement, I can inform you that the task force that went to Pakistan came back with a positive report, and as a consequence Council has authorised us to finalise discussion with Pakistan for Associate Membership. Council also authoris...

  8. Technology and Policy for Suppressing Grain Dust Explosions in Storage Facilities

    National Research Council Canada - National Science Library

    1995-01-01

    To ensure workplace safety, grain handling facilities engage in a variety of activities to control the accumulation of grain dust, such as good housekeeping practices, pneumatic systems, and liquid additives...

  9. ITER council proceedings: 1997

    International Nuclear Information System (INIS)

    1997-01-01

    This volume of the ITER EDA Documentation Series presents records of the 12th ITER Council Meeting, IC-12, which took place on 23-24 July, 1997 in Tampere, Finland. The Council received from the Parties (EU, Japan, Russia, US) positive responses on the Detailed Design Report. The Parties stated their willingness to contribute to fulfil their obligations in contributing to the ITER EDA. The summary discussions among the Parties led to the consensus that in July 1998 the ITER activities should proceed for additional three years with a general intent to enable an efficient start of possible, future ITER construction

  10. Vitrification technology for treating low-level waste from nuclear facilities

    International Nuclear Information System (INIS)

    Oniki, Toshiro; Nabemoto, Toyonobu; Fukui, Toshiki

    2016-01-01

    The development of technologies for treating nuclear waste generated by nuclear power plants and reprocessing plants during their operation or decommissioning is underway both in Japan and abroad. Of the many types of treatment technologies that have been developed, vitrification technology is attracting attention as being the most promising technology for converting such waste into a stable state. As a brief review of technical developments aimed at reducing nuclear waste and finding a solution to the final disposal issue, this paper describes approaches to completing the development of vitrification technology in Japan, including IHI's activities. (author)

  11. 75 FR 15949 - Revisions to Form, Procedures, and Criteria for Certification of Qualifying Facility Status for a...

    Science.gov (United States)

    2010-03-30

    ... technologies. \\20\\ Interstate Renewable Energy Council and SolarCity (Interstate Renewable); Sun Edison LLC... being small power production facilities, and 90 percent were made by solar-powered and wind-powered... electric energy solely by the use, as a primary energy source, of solar energy, wind energy, waste...

  12. Baseline Environmental Analysis Report for the K-1251 Barge Facility at the East Tennessee Technology Park, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Van Winkle J.E.

    2007-08-24

    This report documents the baseline environmental conditions of the U. S. Department of Energy's (DOE's) K-1251 Barge Facility, which is located at the East Tennessee Technology Park (ETTP). DOE is proposing to lease the facility to the Community Reuse Organization of East Tennessee (CROET). This report provides supporting information for the use, by a potential lessee, of government-owned facilities at ETTP. This report is based upon the requirements of Sect. 120(h) of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). The lease footprint is slightly over 1 acre. The majority of the lease footprint is defined by a perimeter fence that surrounds a gravel-covered area with a small concrete pad within it. Also included is a gravel drive with locked gates at each end that extends on the east side to South First Avenue, providing access to the facility. The facility is located along the Clinch River and an inlet of the river that forms its southern boundary. To the east, west, and north, the lease footprint is surrounded by DOE property. Preparation of this report included the review of government records, title documents, historic aerial photos, visual and physical inspections of the property and adjacent properties, and interviews with current and former employees involved in the operations on the real property to identify any areas on the property where hazardous substances and petroleum products or their derivatives and acutely hazardous wastes were known to have been released or disposed. Radiological surveys were conducted and chemical samples were collected to assess the facility's condition.

  13. Report on the Best Available Technology (BAT) for the treatment of the INEL Central Laundry and Respirator Facility (CFA-617)

    International Nuclear Information System (INIS)

    Miyasaki, D.H.; Heiser, D.L.

    1991-01-01

    The Central Laundry and Respirator Facility (CLRF) designated by the building number of CFA-617 has been addressed as a potential source of contamination to the Central Facilities Area (CFA) subsurface drainage field which also receives waste water from the current CFA Sewage Treatment Plant (STP). Currently, discharges from the CLRF have been below set guidelines, DCG. A new STP has been proposed for the CFA. Since the CLRF has been designated as a potential source of contamination, a Best Available Technology (BAT) assessment was requested to determine what action should be taken in respect to the aqueous discharges from the CLRF. The BAT assessment involved source definition, technology evaluation, BAT matrix development, BAT selection, and BAT documentation. The BAT for the Central laundry and Respirator Facility selected the treatment which would impact the CLRF and the new STP the least in all aspects considered and was the system of filtration and a lined pond for natural evaporation of the water. The system will provide an isolation of this waste stream from all other CFA waste water which will be treated at the new STP. Waste minimization possibilities exist within the laundry process and are considered. These minimization actions will reduce the amount of waste water being released, but will result in raising the contaminate's concentrations (the total mass will remain the same). The second option was the use of ion exchange to remove the contaminates and recycle the water back to the wash and rinse cycles in the laundry. 3 refs., 9 figs., 11 tabs

  14. Universities and Councils Network on Innovation for Inclusive ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Universities and Councils Network on Innovation for Inclusive Development in ... IDRC-supported project, 104904 Science and Technology Innovation for the ... titled “Climate change and adaptive water management: Innovative solutions from ...

  15. Statewide Suicide Prevention Council

    Science.gov (United States)

    State Employees Statewide Suicide Prevention Council DHSS State of Alaska Home Divisions and Agencies National Suicide Prevention Lifeline Alaska Community Mental Health Centers National Survivors of Suicide Meetings Presentations 2010 Alaska Statewide Suicide Prevention Summit: Mending the Net Connect with us on

  16. International fusion research council

    International Nuclear Information System (INIS)

    Belozerov, A.N.

    1977-01-01

    A brief history of the International Fusion Research Council (IFRC) is given and the minutes of the 1976 meeting in Garching are summarized. At the Garching meeting, the IFRC evaluated the quality of papers presented at recent IAEA conferences on plasma physics and controlled thermonuclear research, and made recommendations on the organization and timing of future meetings on nuclear fusion

  17. Elections to Staff Council

    CERN Multimedia

    Staff Association

    2011-01-01

    Elections to fill all seats in the Staff Council are being organized this month. The voting takes place from the 31st of October to the 14th of November, at noon. As you may have noted when reading Echo, many issues concerning our employment conditions are on the agenda of the coming months and will keep the next Staff Council very busy. So, make your voice heard and take part in the elections for a new Staff Council. By doing so, you will be encouraging the men and women who will be representing you over the next two years and they will doubtless appreciate your gratitude. Every member of the Staff Association will have received an email containing a link to the webpage which will allow voting. If you are a member of the Staff Association and you did not receive such an email, please contact the Staff Association secretariat (staff.association@cern.ch). Do not forget to vote * * * * * * * Vote Make your voice heard and be many to elect the new Staff Council. More details on the election...

  18. Council Membership Directory 1969.

    Science.gov (United States)

    Council of Organizations Serving the Deaf, Washington, DC.

    Information is provided on the purposes, goals, functions, membership, board of directors, calendar of events, publications, and names and addresses of the officers or executive committees of 19 national organizations serving the deaf. Organizations included are the Council of Organizations Serving the Deaf, Alexander Graham Bell Association for…

  19. Technology developments for ACIGA high power test facility for advanced interferometry

    Energy Technology Data Exchange (ETDEWEB)

    Barriga, P [School of Physics, University of Western Australia, Perth, WA 6009 (Australia); Barton, M [California Institute of Technology, LIGO Project, Pasadena, CA 91125 (United States); Blair, D G [School of Physics, University of Western Australia, Perth, WA 6009 (Australia)] [and others

    2005-05-21

    The High Optical Power Test Facility for Advanced Interferometry has been built by the Australian Consortium for Interferometric Gravitational Astronomy north of Perth in Western Australia. An 80 m suspended cavity has been prepared in collaboration with LIGO, where a set of experiments to test suspension control and thermal compensation will soon take place. Future experiments will investigate radiation pressure instabilities and optical spring effects in a high power optical cavity with {approx}200 kW circulating power. The facility combines research and development undertaken by all consortium members, whose latest results are presented.

  20. Technology developments for ACIGA high power test facility for advanced interferometry

    International Nuclear Information System (INIS)

    Barriga, P; Barton, M; Blair, D G

    2005-01-01

    The High Optical Power Test Facility for Advanced Interferometry has been built by the Australian Consortium for Interferometric Gravitational Astronomy north of Perth in Western Australia. An 80 m suspended cavity has been prepared in collaboration with LIGO, where a set of experiments to test suspension control and thermal compensation will soon take place. Future experiments will investigate radiation pressure instabilities and optical spring effects in a high power optical cavity with ∼200 kW circulating power. The facility combines research and development undertaken by all consortium members, whose latest results are presented

  1. In the coking section of the Scientific Council of the Main Committee for Science and Technology 'New processes in ferrous metallurgy'

    Energy Technology Data Exchange (ETDEWEB)

    Bukvareva, O.F.

    1989-12-01

    Reports on a meeting held in June 1990 in Khar'kov on new technologies of black coal coking and methods for coal gas purification used in the USSR and other countries. The following problems associated with economic analysis of new coking technologies were analyzed: types of coal used in mixtures for coking, mixtures for coking, coal mixture preheating, partial briquetting. The following problems associated with coal gas purification were discussed: primary cooling systems, methods for ammonia separation from coal gas, coal gas desulfurization, separation of hydrogen cyanide, amine methods for desulfurization. Recommendations for research programs on new coking technologies and on coal gas purification are discussed.

  2. Testing for Nuclear Thermal Propulsion Systems: Identification of Technologies for Effluent Treatment in Test Facilities

    Data.gov (United States)

    National Aeronautics and Space Administration — Key steps to ensure identification of relevant effluent treatment technologies for Nuclear Thermal Propulsion (NTP) testing include the following. 1. Review of...

  3. 77 FR 2275 - Manufacturing Council

    Science.gov (United States)

    2012-01-17

    ... DEPARTMENT OF COMMERCE International Trade Administration Manufacturing Council AGENCY... candidate's proven experience in promoting, developing and marketing programs in support of manufacturing... participating in Council meetings and events are responsible for their travel, living and other personal...

  4. 76 FR 33244 - Manufacturing Council

    Science.gov (United States)

    2011-06-08

    ... DEPARTMENT OF COMMERCE International Trade Administration Manufacturing Council AGENCY... experience in promoting, developing and marketing programs in support of manufacturing industries, in job... Council meetings and events are responsible for their travel, living and other personal expenses. Meetings...

  5. Test Plan for the Wake Steering Experiment at the Scaled Wind Farm Technology (SWiFT) Facility.

    Energy Technology Data Exchange (ETDEWEB)

    Naughton, Brian Thomas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-02-01

    This document is a test plan describing the objectives, configuration, procedures, reporting, roles, and responsibilities for conducting the joint Sandia National Laboratories and National Renewable Energy Laboratory Wake Steering Experiment at the Sandia Scaled Wind Farm Technology (SWiFT) facility near Lubbock, Texas in 2016 and 2017 . The purpose of this document is to ensure the test objectives and procedures are sufficiently detailed such that al l involved personnel are able to contribute to the technical success of the test. This document is not intended to address safety explicitly which is addressed in a separate document listed in the references titled Sandia SWiFT Facility Site Operations Manual . Both documents should be reviewed by all test personnel.

  6. A Guide for Planning Facilities for Occupational Preparation Programs in Metallurgy Technology. Interim Report. Research 28.

    Science.gov (United States)

    German, Carl, Jr.

    The major purpose of this guide is to elicit the information necessary for writing educational specifications for facilities to house technical education programs in metallurgy. It is organized in these parts: (1) Part I discusses the major purpose, underlying assumptions, recent instructional trends, and guiding principles utilized in the…

  7. Compressed Air System Renovation Project Improves Production at a Food Processing Facility: Office of Industrial Technologies (OIT) BestPractices Technical Case Study

    International Nuclear Information System (INIS)

    Wogsland, J.

    2001-01-01

    This case study is one in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. This case study documents the activities, savings, and lessons learned on the food processing facility project

  8. The application of advanced remote systems technology to future waste handling facilities: Waste Systems Data and Development Program

    International Nuclear Information System (INIS)

    Kring, C.T.; Herndon, J.N.; Meacham, S.A.

    1987-01-01

    The Consolidated Fuel Reprocessing Program (CFRP) at the Oak Ridge National Laboratory (ORNL) has been advancing the technology in remote handling and remote maintenance of in-cell systems planned for future US nuclear fuel reprocessing plants. Much of the experience and technology developed over the past decade in this endeavor are directly applicable to the in-cell systems being considered for the facilities of the Federal Waste Management System (FWMS). The ORNL developments are based on the application of teleoperated force-reflecting servomanipulators controlled by an operator completely removed from the hazardous environment. These developments address the nonrepetitive nature of remote maintenance in the unstructured environments encountered in a waste handling facility. Employing technological advancements in dexterous manipulators, as well as basic design guidelines that have been developed for remotely maintained equipment and processes, can increase operation and maintenance system capabilities, thereby allowing the attainment of two FWMS major objectives: decreasing plant personnel radiation exposure and increasing plant availability by decreasing the mean-time-to-repair in-cell maintenance and process equipment. 5 refs., 7 figs

  9. Science councils in South Africa

    CSIR Research Space (South Africa)

    Scholes, RJ

    2008-11-01

    Full Text Available for Scien- tific and Industrial Research (CSIR), the Medical Research Council, Agricultural Research Council, Human Sciences Research Council, Council for Geosciences, Mintek, and the Nuclear Energy Corporation of SA. Legally, it includes the National... with social or commercial impact is long and uncer- tain, and becomes more and more expen- sive the closer the development gets to implementation. It is hard for a single organization to span this entire contin- uum effectively—it requires ‘interfacial...

  10. Developing an integrated design model incorporating technology philosophy for the design of healthcare environments : a case analysis of facilities for psychogeriatric and psychiatric care in The Netherlands

    NARCIS (Netherlands)

    van Hoof, J.; Verkerk, M.J.

    The design of healthcare facilities is a complex and dynamic process, which involves many stakeholders each with their own set of needs. In the context of healthcare facilities, this complexity exists at the intersection of technology and society because the very design of these buildings forces us

  11. 31st August 2011 - Government of Japan R. Chubachi, Executive Member of the Council for Science and Technology Policy, Cabinet Office, Vice Chairman, Representative Corporate Executive Officer and Member of the Board, Sony Corporation, visiting the ATLAS experimental area with Former Collaboration Spokesperson P. Jenni and Senior physicist T. Kondo.

    CERN Multimedia

    Raphaël Piguet

    2011-01-01

    31st August 2011 - Government of Japan R. Chubachi, Executive Member of the Council for Science and Technology Policy, Cabinet Office, Vice Chairman, Representative Corporate Executive Officer and Member of the Board, Sony Corporation, visiting the ATLAS experimental area with Former Collaboration Spokesperson P. Jenni and Senior physicist T. Kondo.

  12. Test facilities for radioactive materials transport packages (Transportation Technology Center Inc., Pueblo, Colorado, USA)

    International Nuclear Information System (INIS)

    Conlon, P.C.L.

    2001-01-01

    Transportation Technology Center, Inc. is capable of conducting tests on rail vehicle systems designed for transporting radioactive materials including low level waste debris, transuranic waste, and spent nuclear fuel and high level waste. Services include rail vehicle dynamics modelling, on-track performance testing, full scale structural fatigue testing, rail vehicle impact tests, engineering design and technology consulting, and emergency response training. (author)

  13. Waste disposal technology transfer matching requirement clusters for waste disposal facilities in China

    International Nuclear Information System (INIS)

    Dorn, Thomas; Nelles, Michael; Flamme, Sabine; Jinming, Cai

    2012-01-01

    Highlights: ► We outline the differences of Chinese MSW characteristics from Western MSW. ► We model the requirements of four clusters of plant owner/operators in China. ► We examine the best technology fit for these requirements via a matrix. ► Variance in waste input affects result more than training and costs. ► For China technology adaptation and localisation could become push, not pull factors. - Abstract: Even though technology transfer has been part of development aid programmes for many decades, it has more often than not failed to come to fruition. One reason is the absence of simple guidelines or decision making tools that help operators or plant owners to decide on the most suitable technology to adopt. Practical suggestions for choosing the most suitable technology to combat a specific problem are hard to get and technology drawbacks are not sufficiently highlighted. Western counterparts in technology transfer or development projects often underestimate or don’t sufficiently account for the high investment costs for the imported incineration plant; the differing nature of Chinese MSW; the need for trained manpower; and the need to treat flue gas, bunker leakage water, and ash, all of which contain highly toxic elements. This article sets out requirements for municipal solid waste disposal plant owner/operators in China as well as giving an attribute assessment for the prevalent waste disposal plant types in order to assist individual decision makers in their evaluation process for what plant type might be most suitable in a given situation. There is no ‘best’ plant for all needs and purposes, and requirement constellations rely on generalisations meaning they cannot be blindly applied, but an alignment of a type of plant to a type of owner or operator can realistically be achieved. To this end, a four-step approach is suggested and a technology matrix is set out to ease the choice of technology to transfer and avoid past errors. The four

  14. Development and Improvement of Devices for Hydrogen Generation and Oxidation in Water Detritiation Facility Based on CECE Technology

    International Nuclear Information System (INIS)

    Rozenkevich, M.; Andreev, B.; Magomedbekov, E.; Park, Yu.; Sakharovsky, Yu.; Perevezentsev, A.

    2005-01-01

    Water detritiation facility based on CECE (Combined Electrolysis and Catalytic Exchange) technology needs an electrolyser for water conversion to hydrogen. Use of a conventional alkali electrolyser requires a very deep purification of hydrogen stream from alkali prior to injection to LPCE (Liquid Phase Catalytic Exchange) column. In some applications conversion of detritiated hydrogen back into water is required. This is usually performed via hydrogen catalytic oxidation in a recombiner. This paper presents results of study to improve hydrogen and oxygen purification for alkali electrolysers and develop a hydrogen recombiner based on use of hydrophobic catalyst

  15. Regulations on the allocating of subsidies to promote the development of radiation exposure reduction technology for nuclear power facilities

    International Nuclear Information System (INIS)

    1984-01-01

    The regulations provide for subsidies for the research and development of radiation exposure reduction technology for nuclear power facilities and evaluation of the results. The subsidies are for purchase of equipment, materials, etc. and other expendures approved. The contents are as follows: applications for subsidies, determination of subsidy allocations, withdrawal of applications, a report on the work proceedings, a report on the results, confirmation on the sum of the subsidies, payment of subsidies, approval of alterations in the plans, withdrawal of the decision for subsidies, patent rights, payment of the earnings, management of the properties, etc. (Mori, K.)

  16. Regulations on allocating the sums of money regarding of development of radiation exposure reduction technology for nuclear power facilities

    International Nuclear Information System (INIS)

    1984-01-01

    The regulations provide for the sums of money regarding research and development of radiation exposure reduction technology for nuclear power facilities and evaluation of the results. Expenses cover the purchase of equipment, personnel expenditures, travelling expenses, communication, etc. The contents are as follows: the application for subsidy allocations, determination of subsidy allocations, withdrawal of applications, a report on the work proceedings, a report on the results, approval of alterations in the plans, withdrawal of the decision for a subsidy allocation, patent rights, utilization etc. of the results, management of the properties, etc. (Mori, K.)

  17. Physics and Technology for the Next Generation of Radioactive Ion Beam Facilities: EURISOL

    CERN Document Server

    Kadi, Y; Catherall, R; Giles, T; Stora, T; Wenander, F K

    2012-01-01

    Since the discovery of artificial radioactivity in 1935, nuclear scientists have developed tools to study nuclei far from stability. A major breakthrough came in the eighties when the first high energy radioactive beams were produced at Berkeley, leading to the discovery of neutron halos. The field of nuclear structure received a new impetus, and the major accelerator facilities worldwide rivalled in ingenuity to produce more intense, purer and higher resolution rare isotope beams, leading to our much improved knowledge and understanding of the general evolution of nuclear properties throughout the nuclear chart. However, today, further progress is hampered by the weak beam intensities of current installations which correlate with the difficulty to reach the confines of nuclear binding where new phenomena are predicted, and where the r-process path for nuclear synthesis is expected to be located. The advancement of Radioactive Ion Beam (RIB) science calls for the development of so-called next-generation facil...

  18. Federal Technology Alert: Ground-Source Heat Pumps Applied to Federal Facilities-Second Edition; FINAL

    International Nuclear Information System (INIS)

    Hadley, Donald L

    2001-01-01

    This Federal Technology Alert, which was sponsored by the U.S. Department of Energy's Office of Federal Energy Management Programs, provides the detailed information and procedures that a Federal energy manager needs to evaluate most ground-source heat pump applications. This report updates an earlier report on ground-source heat pumps that was published in September 1995. In the current report, general benefits of this technology to the Federal sector are described, as are ground-source heat pump operation, system types, design variations, energy savings, and other benefits. In addition, information on current manufacturers, technology users, and references for further reading are provided

  19. Qualification of Coatings for Launch Facilities and Ground Support Equipment Through the NASA Corrosion Technology Laboratory

    Science.gov (United States)

    Kolody, Mark R.; Curran, Jerome P.; Calle, Luz Marina

    2014-01-01

    Corrosion protection at NASA's Kennedy Space Center is a high priority item. The launch facilities at the Kennedy Space Center are located approximately 1000 feet from the Atlantic Ocean where they are exposed to salt deposits, high humidity, high UV degradation, and acidic exhaust from solid rocket boosters. These assets are constructed from carbon steel, which requires a suitable coating to provide long-term protection to reduce corrosion and its associated costs.

  20. Optimization of an Innovative Biofiltration System as a VOC Control Technology for Aircraft Painting Facilities

    Science.gov (United States)

    2004-04-20

    plants. Since the 1980s, however, biofiltration has also been used to eliminate VOCs in gases emitted from a wide range of processes (van Groenestijn...process for the VOC-laden waste gases exiting paint spray booths at DoD maintenance facilities. Conceptually, the biofiltration process can be divided...recently, biofiltration applications have been expanded to treat VOC-laden waste gases emitted by industry (Ottengraf, 1986, van Groenestijn, 1994; Swanson

  1. The Scientific Field during Argentina's Latest Military Dictatorship (1976-1983): Contraction of Public Universities and Expansion of the National Council for Scientific and Technological Research (CONICET)

    Science.gov (United States)

    Bekerman, Fabiana

    2013-01-01

    This study looks at some of the traits that characterized Argentina's scientific and university policies under the military regime that spanned from 1976 through 1983. To this end, it delves into a rarely explored empirical observation: financial resource transfers from national universities to the National Scientific and Technological Research…

  2. U.S. Army Hybrid Propulsion System R&D Overview ATA/Technology & Maintenance Council 2011 Fall Meeting, Hybrid Powertrain Task Force Session

    Science.gov (United States)

    2011-09-19

    and CVTS – HHO Technology – Start-Stop & Idle Stop Accessories – Pulse Jet Air Cleaner Ultra – Hybrid Energy Module (HEM) for Electric and Hybrid...The engine will meet 2010 EPA emission requirements – Hybrid drive powertrain; a 160 Horsepower (Hp) electric machine used for propulsion and

  3. Implementing technology to improve medication safety in healthcare facilities: a literature review.

    Science.gov (United States)

    Hidle, Unn

    Medication errors remain one of the most common causes of patient injuries in the United States, with detrimental outcomes including adverse reactions and even death. By developing a better understanding of why and how medication errors occur, preventative measures may be implemented including technological advances. In this literature review, potential methods of reducing medication errors were explored. Furthermore, technology tools available for medication orders and administration are described, including advantages and disadvantages of each system. It was found that technology can be an excellent aid in improving safety of medication administration. However, computer technology cannot replace human intellect and intuition. Nurses should be involved when implementing any new computerized system in order to obtain the most appropriate and user-friendly structure.

  4. UN human rights council

    Directory of Open Access Journals (Sweden)

    Vuksanović Mlrjana

    2014-01-01

    Full Text Available The paper deals with the structure, mechanisms, practices and perspectives of the Human Rights Council, the UN body that, at universal level is the most important body in this area. Introductory section provides for a brief overview of the origins of human rights and the work of the Commission on Human Rights, in whose jurisdiction were questions of human rights before the establishment of the Council. After the introductory section the author gives an analysis of the structure, objectives, mandate and main procedures for the protection of human rights within the united Nations. In the final section the authorpoints out the advantages of this authority and criticism addressed to it, with emphasis on the possibility and the need for its reform.

  5. Waste disposal technology transfer matching requirement clusters for waste disposal facilities in China.

    Science.gov (United States)

    Dorn, Thomas; Nelles, Michael; Flamme, Sabine; Jinming, Cai

    2012-11-01

    Even though technology transfer has been part of development aid programmes for many decades, it has more often than not failed to come to fruition. One reason is the absence of simple guidelines or decision making tools that help operators or plant owners to decide on the most suitable technology to adopt. Practical suggestions for choosing the most suitable technology to combat a specific problem are hard to get and technology drawbacks are not sufficiently highlighted. Western counterparts in technology transfer or development projects often underestimate or don't sufficiently account for the high investment costs for the imported incineration plant; the differing nature of Chinese MSW; the need for trained manpower; and the need to treat flue gas, bunker leakage water, and ash, all of which contain highly toxic elements. This article sets out requirements for municipal solid waste disposal plant owner/operators in China as well as giving an attribute assessment for the prevalent waste disposal plant types in order to assist individual decision makers in their evaluation process for what plant type might be most suitable in a given situation. There is no 'best' plant for all needs and purposes, and requirement constellations rely on generalisations meaning they cannot be blindly applied, but an alignment of a type of plant to a type of owner or operator can realistically be achieved. To this end, a four-step approach is suggested and a technology matrix is set out to ease the choice of technology to transfer and avoid past errors. The four steps are (1) Identification of plant owner/operator requirement clusters; (2) Determination of different municipal solid waste (MSW) treatment plant attributes; (3) Development of a matrix matching requirement clusters to plant attributes; (4) Application of Quality Function Deployment Method to aid in technology localisation. The technology transfer matrices thus derived show significant performance differences between the

  6. NASA's Suborbital Missions Teach Engineering and Technology: Goddard Space Flight Center's Wallops Flight Facility

    Science.gov (United States)

    Winterton, Joyce L.

    2016-01-01

    A 50 minute-workshop based on NASA publicly available information will be conducted at the International Technology and Engineering Educator Association annual conference. Attendees will include middle and high school teachers and university teacher educators. Engineering and technology are essential to NASA's suborbital missions including sounding rockets, scientific balloon and airborne science. The attendees will learn how to include NASA information on these missions in their teaching.

  7. The suitability and installation of technological equipment when upgrading existing facilities

    Directory of Open Access Journals (Sweden)

    Ladnushkin A. A.

    2016-03-01

    Full Text Available to date, a large number of Russian companies in diverse and various industries, has old equipment and requires modernization of the technological process due to the growth of scientific and technological progress. In order to achieve goals when upgrading is considered such an important aspect as the readiness of the new equipment installation. Mounting hardware suitability describes the suitability and readiness of equipment for efficient Assembly at the user. Replacement of technological equipment requires large volumes of works on installation and dismantling, in the absence of the building has its own lifting mechanisms require large financial and labor costs. One of possible methods for replacement of process equipment is the technology of without crane installation allows us to carry out work in existing space planning. Today is the question of the necessity of development and introduction of new technological production methods and fixtures tooling in which it is possible to conduct installation and dismantling of technological equipment in the operating production process.

  8. Highlights: Spring Council Meeting

    Science.gov (United States)

    Council members present at the May 24, 1981, meeting were Keiiti Aki, Steven Burges (for Jim Wallis), Peter S. Eagleson, E. R. Engdahl, Charles E. Helsley, James R. Heirtzler, Carl Kisslinger, Leslie H. Meredith, Chris N. K. Mooers, Norman F. Ness, Marcia M. Neugebauer, James J. O'Brien, Richard Rapp, Carl Sagan, James C. Savage, Joseph V. Smith, Fred Spilhaus, Donald L. Turcotte, James A. Van Allen, J. Tuzo Wilson, and Jay Winston (for Elmar R. Reiter until his arrival at 6:50 P.M.). David Strangway, representing the Canadian Geophysical Union, and Peter Steinhauser, representing the European Geophysical Society, were special observers at the meeting. Council meetings are open, and a number of section secretaries, committee chairmen, journal editors, and other members attended. The following major actions were adopted by the Council:The experiment of publishing oceanography and lower-atmosphere papers in JGR Green issues alternate to those containing upper-atmosphere papers will be continued through 1982. From preliminary indications the experiment seems to be working, but a full year of data, including a renewal cycle, is needed to assess the success of the experiment. Final decision will be made prior to the 1983 dues notices.

  9. DECLARATION TO COUNCIL

    CERN Multimedia

    Staff Association

    2015-01-01

    One year ago, the Staff Association, together with the CERN-ESO Pensioners' Association, organized a staff meeting in front of this building to express our concern about certain actions of this Committee. Today we deem it necessary to come before you and convey in person, dear delegates, the concerns and worries of the staff. Indeed, the last 18 months we have observed a tendency of Council to take matters, in particular in the field of pensions, into its own hands, bypassing established governance structures, which Council has itself put into place. As a result, the Director General was prevented from playing his essential role of intermediary between staff and Council, an essential element of the established social dialogue. The creation of CERN in 1954 was very much based on the willingness of many countries of the old Continent to share resources to create a joint fundamental physics laboratory. The emphasis was on sharing resources for the common good to allow European scientists to engage in...

  10. Elections to Staff Council

    CERN Multimedia

    Staff Association

    2013-01-01

    Elections to fill all seats in the Staff Council are being organized this month. The voting takes place from the 28 of October to the 11th of November, at noon. As you may have noted when reading Echo, many issues concerning our employment conditions are on the agenda of the coming months, and in particular the Five-yearly-Review 2015, subject of the questionnaire that you probably recently filled out. All this will keep the next Staff Council very busy indeed. So, make your voice heard and take part in the elections for a new Staff Council. By doing so, you will be encouraging the men and women who will be representing you over the next two years and they will doubtless appreciate your gratitude. Every member of the Staff Association will have received an email containing a link to the webpage which will allow voting. If you are a member of the Staff Association and you did not receive such an email, please contact the Staff Association secretariat (staff.association@cern.ch). Do not forget to v...

  11. Avenues for research and technology development for industrial applications using electron beam facilities and their exploitation through BRNS schemes

    International Nuclear Information System (INIS)

    Markandeya, S.G.

    2013-01-01

    BARC has been responsible to establish indigenously designed state-of-the-art electron accelerator facilities at its Electron Beam Centre at Kharghar, Navi Mumbai. The centre offers two versatile machines namely, (i) 3 MeV, 30 kW Parallel Coupled Self Capacitance type Multiplier (Dynamitron) DC accelerator and (ii) 10 MeV, 10 kW RF Electron Linac. While these machines are being used by scientists and engineers from within DAE, there is tremendous scope for exploiting their use by researchers in the country for basic research as well as by technologists and entrepreneurs for exploiting its potential for industrial applications. However, due to lack of adequate information about the facilities and due to paucity of research funds for the academia in the country, there is always a gap which researchers seldom look forward to be filled up appropriately. The present talk will give a glimpse of some opportunities to exploit the facilities at EBC, Kharghar for variety of applications followed by a brief presentation on provisions under BRNS to carry out sponsored research activities for basic research as well as for technology development for the industrial applications. (author)

  12. Possibility of applying large-scale point cloud/mixed reality technology in decommissioning of nuclear facilities

    International Nuclear Information System (INIS)

    Shoji, Kimiaki

    2017-01-01

    After the accident at Tokyo Electric Company's Fukushima No. 1 nuclear power plant, decommissioning projects of nuclear power plants exceeding 40 years since the start of operation began to move in full swing. And four nuclear power plants have already been under decommissioning. Several decommissioning engineering systems (ES) have been developed according to these decommissioning projects. Various problems were clarified and many findings were obtained by these efforts. On the other, advanced information technologies and products such as three-dimensional CAD, CG, 3D laser measurement, computer aided engineering (CAE) and mixed reality (MR) are progressing rapidly. By combining these technologies and products, it has become possible not only to enhance the usefulness of existing 3D CAD data but also to enable high-level digital study that combines reality and virtual models. Furthermore, it can be applied to a wide range of fields such as demolition simulation for dismantling works of nuclear facilities, which is expected to increase in future, human resource development and skill transfer. In this paper, focusing on a video see-through method capable of displaying a virtual object at a correct position of a real image accurately reflecting the positional relationship between the real image and the virtual object, we introduce items that should contribute to the feasibility and usefulness of application to decommissioning of nuclear facilities. (author)

  13. Development of corrective measures and site stabilization technologies for shallow land burial facilities at semiarid sites: summary paper

    International Nuclear Information System (INIS)

    Nyhan, J.W.; Abeele, W.V.

    1987-01-01

    The overall purpose of the corrective measures task performed for the national Low-Level Waste Management Program (NLLWMP) has been to develop and test methods that can be used to correct any actual or anticipated problems with new and existing shallow land burial (SLB) sites in a semiarid environment. These field tests have not only evaluated remedial actions, but have also investigated phenomena suspected of being a possible problem at semiarid SLB sites. The approach the authors have taken in developing remedial action and site closure technologies for low-level waste sites is to recognize the physical and biological processes affecting site integrity are interdependent, and therefore, cannot be treated as separate problems. More specifically the field experiments performed for this task were to identify, evaluate, and model erosion control technologies, field test second generation biointrusion barriers, determine by field experiments the extent of upward radionuclide migration due to moisture cycling, and measure the effects of subsidence on remedial action of other system components. In the following sections of this final task summary report, the authors describe the progress made in establishing the facility in which many of these field experiments were performed, the Los Alamos Experimental Engineered Test Facility (EETF), as well as a brief description of the four research areas encompassed by this task. 45 references, 4 figures

  14. Integrating innovative technology into remedial action at a US Department of Energy facility

    International Nuclear Information System (INIS)

    Diggs, I.W.

    1992-01-01

    The US Atomic Energy Commission (AEC), predecessor to the US Department Energy (DOE), established a production complex in the early 1950's for processing uranium and its compounds from natural uranium ore concentrates for the purpose of producing high purity uranium metal for various uses in defense reactor and nuclear weapons programs. This complex, previously known as the Feed Materials Production Center (FMPC), is now known as the Fernald Environmental Management Project (FEMP). In 1989, production was stopped at the feed materials facility due to a decision by the DOE. In December of 1989, the site was placed on the US EPA's National Priorities List (NPL) of sites requiring environmental cleanup. As a result, in April of 1990 the DOE and the US EPA signed a Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Consent Agreement which augmented the FFCA. The DOE recently decided that production at the facility would not be resumed, and therefore, the main scope of work would change to remediation and closure of the site. In response to the FFCA and consistent with the modifications agreed to in the amended Consent Agreement, a Remedial Investigation/Feasibility Study (RI/FS) is in progress pursuant to CERCLA, as amended by the Superfund Amendments and Reauthorization Act (SARA). A RI/FS is a comprehensive environmental investigation systematically conducted according to US EPA regulations and guidelines used to identify and select an action plan for the cleanup of CERCLA sites. The RI phase incorporates a broad-based study to evaluate as completely as possible existing environmental and public health risks associated with past or existing facility operations. The FS phase develops and evaluates corrective action alternatives to mitigate identified environmental concerns

  15. The development of coal-based technologies for Department of Defense facilities: Phase 1 final report. Volume 1: Technical report

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.; Morrison, J.L.; Pisupati, S.V. [Pennsylvania State Univ., University Park, PA (United States). Energy and Fuels Research Center] [and others

    1997-01-31

    The first phase of a three-phase project investigating the development of coal-based technologies for Department of Defense facilities has been completed. The objectives of the project are to: decrease DOD`s dependence on foreign oil and increase its use of coal; promote public and private sector deployment of technologies for utilizing coal-based fuels in oil-designed combustion equipment; and provide a continuing environment for research and development of coal-based fuel technologies for small-scale applications at a time when market conditions in the US are not favorable for the introduction of coal-fired equipment in the commercial and industrial capacity ranges. The Phase 1 activities were focused on developing clean, coal-based combustion technologies for the utilization of both micronized coal-water mixtures (MCWMs) and dry, micronized coal (DMC) in fuel oil-designed industrial boilers. The specific objective in Phase 1 was to deliver fully engineered retrofit options for a fuel oil-designed watertube boiler located on a DOD installation to fire either MCWM or DMC. This was achieved through a project consisting of fundamental, pilot-sale, and demonstration-scale activities investigating coal beneficiation and preparation, and MCWM and DMC combustion performance. In addition, detailed engineering designs and an economic analysis were conducted for a boiler located at the Naval Surface Warfare Center, near Crane, Indiana. Results are reported on MCWM and DMC combustion performance evaluation; engineering design; and cost/economic analysis.

  16. Technology, safety and costs of decommissioning reference nuclear fuel cycle facilities

    International Nuclear Information System (INIS)

    Elder, H.K.

    1986-05-01

    The radioactive wastes expected to result from decommissioning nuclear fuel cycle facilities are reviewed and classified in accordance with 10 CFR 61. Most of the wastes from the MOX plant (exclusive of the lagoon wastes) will require interim storage (11% Class A 49 m 3 ; 89% interim storage, 383 m 3 ). The MOX plant lagoon wastes are Class A waste (2930 m 3 ). All of the wastes from the U-Fab and UF 6 plants are designated as Class A waste (U-Fab 1090 m 3 , UF 6 1259 m 3 )

  17. Advanced Motor Control Test Facility for NASA GRC Flywheel Energy Storage System Technology Development Unit

    Science.gov (United States)

    Kenny, Barbara H.; Kascak, Peter E.; Hofmann, Heath; Mackin, Michael; Santiago, Walter; Jansen, Ralph

    2001-01-01

    This paper describes the flywheel test facility developed at the NASA Glenn Research Center with particular emphasis on the motor drive components and control. A four-pole permanent magnet synchronous machine, suspended on magnetic bearings, is controlled with a field orientation algorithm. A discussion of the estimation of the rotor position and speed from a "once around signal" is given. The elimination of small dc currents by using a concurrent stationary frame current regulator is discussed and demonstrated. Initial experimental results are presented showing the successful operation and control of the unit at speeds up to 20,000 rpm.

  18. Removing H{sub 2}S from syngas using proven technology in Japanese waste gasification facilities

    Energy Technology Data Exchange (ETDEWEB)

    Watson, J.; Jones, K.D. [Merichem Chemicals & Refinery Services LLC, Schaumberg, IL (United States). Gas Technology Products

    2007-07-01

    LO-CAT Process from the Gas Technology Products division of Merichem Chemicals and Refinery Services LLC can recover sulfur and provide clean syngas for a variety of uses. The successful implementation of LO-CAT technology in the solid waste gasification market in Japan provided the technical basis for extending the technology into other gasification markets around the world. The first European gasifier project utilizing LO-CAT is scheduled to startup this year, and LO-CAT units are currently under design and construction for coal gasification projects in China and the United States. Whenever the total sulfur contained in the raw syngas is less than 40 tonnes per day, LO-CAT is a valid option for purifying the syngas and recovering the sulfur in a useable form. 1 ref., 2 figs., 1 tab.

  19. Performance characterization of the FLEX low pressure helium facility for fusion technology experiments

    Energy Technology Data Exchange (ETDEWEB)

    Schlindwein, Georg, E-mail: schlindwein@kit.edu; Arbeiter, Frederik

    2014-10-15

    Highlights: • A gas loop for fusion R and D has been built and tested. • Facility requirements and their implementation are given. • The loop's functions and instrumentation are explained. • The loops performance has been characterized. - Abstract: FLEX (Fluid Dynamics Experimental Facility) is a multi-purpose small scale gas loop for research on fluid and thermodynamic investigations, especially heat transfer, flow field measurements and gas purification. Initially it was built for investigation on mini-channel gas-flow to design the HFTM module of IFMIF. Because of its versatility it offers a wide range of further applications, e.g. the research of pressure drops in mockups of breeder units of the helium cooled pebble bed (HCPB) test blanket module for ITER. The main parameters of the loop, which can be operated with inert gases and air are: (i) operation gas pressure 0.02–0.38 MPa abs., (ii) test section pressure head up to 0.12 MPa, (iii) tolerable gas temperature RT – 200 °C and (iv) mass flow rate 0.2–12 × 10{sup −3} kg/s for Helium. This paper gives a detailed view of the loop assembly with the components that generate and regulate the mass flow and loop pressure. The measurement instrumentation will be presented as well as a representative mass flow-pressure drop characteristic. Furthermore, the achievable gas purity will be discussed.

  20. Overview of the applications of cement-based immobilization technologies developed at US DOE facilities

    International Nuclear Information System (INIS)

    Dole, L.R.

    1985-01-01

    This paper briefly reviews seven cement-based waste form development programs at six of the US Department of Energy (DOE) sites. These sites have developed a variety of processes that range from producing 25-mm-(1-in.-) diam pellets in a glove box to producing 240-m-(800-ft-) diam grout sheets within the bedding planes of a deep shale formation. These successful applications of cement-based waste forms to the many radioactive waste streams from nuclear facilities bear witness to the flexibility and reliability of this class of immobilization materials. The US DOE sites and their programs are: (1) Oak Ridge National Laboratory (ORNL), Hydrofracture Grout; (2) Hanford, Transportable Grout Facility (TGF); (3) Savannah River Plant (SRP), Nitrate Saltcrete; (4) EG and G Idaho, Process Experimental Pilot Plant (PREPP); (5) Mound Laboratory (ML), Waste Pelletization Process; (6) ORNL, FUETAP Concretes, and (7) Rocky Flats Plant (RFP), Inert Carrier Concrete Process (ICCP). The major issues regarding the application of cement-based waste forms to radioactive waste management problems are also presented. These issues are (1) leachability, (2) radiation stability, (3) thermal stability, (4) phase complexity of the matrix, and (5) effects of the waste stream composition. A cursory review of current research in each of these areas is included along with a discussion of future trends in cement-based waste form developments and applications. 35 refs., 12 figs

  1. The Sheffield RNAi Screening Facility (SRSF): portfolio growth and technology development.

    Science.gov (United States)

    Brown, Stephen

    2014-05-01

    The Sheffield RNAi Screening Facility (SRSF) (www.rnai.group.shef.ac.uk) was established in 2008 with Wellcome Trust and University of Sheffield funding, with the task to provide the first UK RNAi screening resource for academic groups interested in identifying genes required in a diverse range of biological processes using Drosophila cell culture. The SRSF has carried out a wide range of screens varying in sizes from bespoke small-scale libraries, targeting a few hundred genes, to high-throughput, genome-wide studies. The SRSF has grown and improved with a dedicated partnership of its academic customers based mainly in the UK. We are part of the UK Academics Functional Genomics Network, participating in organizing an annual meeting in London and are part of the University of Sheffield's D3N (www.d3n.org.uk), connecting academics, biotech and pharmaceutical companies with a multidisciplinary network in Drug Discovery and Development. Recently, the SRSF has been funded by the Yorkshire Cancer Research Fund to perform genome-wide RNAi screens using human cells as part of a core facility for regional Yorkshire Universities and screens are now underway. Overall the SRSF has carried out more than 40 screens from Drosophila and human cell culture experiments.

  2. Great gas plants : these five natural gas processing facilities demonstrate decades of top-flight technology

    Energy Technology Data Exchange (ETDEWEB)

    Byfield, M.

    2010-07-15

    The natural gas purification and pipeline sector is a major economic driver in Canada. Gas processing facilities are growing in number, and several large gas projects are being planned for future construction in the western provinces. This article outlined 5 gas plants in order to illustrate the sector's history and breadth in Canada. The Shell Jumping Pound gas complex was constructed in 1951 after a sulfur-rich gas discovery near Calgary in 1944. The Empress Straddle plant was built in 1971 in southeastern Alberta and is one of the largest single industrial consumers of electrical power in the province. The Fort Nelson gas processing plant is North America's largest sour gas processing facility. The Shell Caroline complex was built 1993. The Sable offshore energy project is located on the coast of Nova Scotia to handle gas produced from the Thebaud wells. A consortium is now considering the development of new gas fields in the Sable area. 5 figs.

  3. Wireless sensor network in a nuclear facility: A technology application proposal

    International Nuclear Information System (INIS)

    Maciel, F.; Fernandez, R. O; Vilugron, R. M

    2009-01-01

    This work presents an overview of a pretended testbed implementation in order to test a bunch of developments and work in WSN technology and to acquire confidence in deployment of WSN applications and to test the integration of WSN with legacy instrumentation or information systems to improve the information coverage. [es

  4. Evolution of Technology Laser Scanner. Implications for use in Nuclear Power and Radioactive Facilities

    International Nuclear Information System (INIS)

    Sarti Fernandez, F.; Bonet, J.

    2012-01-01

    The main technical factors affecting these teams their actual implementation in nuclear power plants will be analyzed: data acquisition speed, sensitivity, laser power, autonomy, contamination of equipment, radiation effect, etc. In conclusion, the real difference is displayed in the data collection in function of various technologies, embodied in field time, and costs.

  5. Mixed Waste Management Facility (MWMF) Old Burial Ground (OBG) source control technology and inventory study

    Energy Technology Data Exchange (ETDEWEB)

    Flach, G.P.; Rehder, T.E.; Kanzleiter, J.P.

    1996-10-02

    This report has been developed to support information needs for wastes buried in the Burial Ground Complex. Information discussed is presented in a total of four individual attachments. The general focus of this report is to collect information on estimated source inventories, leaching studies, source control technologies, and to provide information on modeling parameters and associated data deficiencies.

  6. Mixed Waste Management Facility (MWMF) Old Burial Ground (OBG) source control technology and inventory study

    International Nuclear Information System (INIS)

    Flach, G.P.; Rehder, T.E.; Kanzleiter, J.P.

    1996-01-01

    This report has been developed to support information needs for wastes buried in the Burial Ground Complex. Information discussed is presented in a total of four individual attachments. The general focus of this report is to collect information on estimated source inventories, leaching studies, source control technologies, and to provide information on modeling parameters and associated data deficiencies

  7. KAERI Underground Research Facility (KURF) for the Demonstration of HLW Disposal Technology

    International Nuclear Information System (INIS)

    Hahn, P. S.; Cho, W. J.; Kwon, S.

    2006-01-01

    In order to dispose of high-level radioactive waste(HLW) safely in geological formations, it is necessary to assess the feasibility, safety, appropriateness, and stability of the disposal concept at an underground research site, which is constructed in the same geological formation as the host rock. In this paper, the current status of the conceptual design and the construction of a small scale URL, which is named as KURF, were described. To confirm the validity of the conceptual design of the underground facility, a geological survey including a seismic refraction survey, an electronic resistivity survey, a borehole drilling, and in situ and laboratory tests had been carried out. Based on the site characterization results, it was possible to effectively design the KURF. The construction of the KURF was started in May 2005 and the access tunnel was successfully completed in March 2006. Now the construction of the research modules is under way

  8. Licensing strategy for deployment of commercial technologies procured through a service contract in DOE-owned facilities

    International Nuclear Information System (INIS)

    Bloom, J.W.

    1998-01-01

    The US Department of Energy's Hanford Tank Farm Remediation System (TWRS) is responsible for the safe storage of waste in 177 underground waste storage tanks. TWRS is also responsible for the cleanup and final closure of these tanks. In the performance of this mission TWRS has historically designed its own equipment. The safety of the equipment for deployment in TWRS facilities has been assured through the development of detailed engineering specifications and close QA/QC monitoring during fabrication and testing. In order to address the complex and costly cleanup mission Hanford is looking for ways to apply private sector technologies to the cleanup mission. The Hanford Tanks Initiative (HTI) is a five year, EM 30/50 expense-funded project with a primary objective of demonstrating the extent to which the Hanford Tank Waste Remediation System (TWRS) tanks can be cleaned using commercially available technologies. To accomplish this objective, in August 1996 HTI issued a Request for Proposal (RFP) for services to remove the hard heel waste from tank 241-C-106, following retrieval of the majority of the waste by sluicing. While certain specification guidance was provided in the RFP such as, must be capable of operation in a flammable gas environment, the RFP was careful in avoiding language that would place limitations on the technologies that industry could provide. The challenge for HTI was to develop a licensing strategy that would provide maximum flexibility to the technology vendors while meeting the stringent documentation requirements of the US Department of Energy (DOE). This strategy must also provide assurance that the technology can be shown to be within the TWRS authorization basis and be safely deployed. A 35-step process (Figure 1) was developed by HTI to accomplish this objective

  9. Licensing strategy for deployment of commercial technologies procured through a service contract in DOE-owned facilities

    Energy Technology Data Exchange (ETDEWEB)

    Bloom, J.W.

    1998-05-05

    The US Department of Energy`s Hanford Tank Farm Remediation System (TWRS) is responsible for the safe storage of waste in 177 underground waste storage tanks. TWRS is also responsible for the cleanup and final closure of these tanks. In the performance of this mission TWRS has historically designed its own equipment. The safety of the equipment for deployment in TWRS facilities has been assured through the development of detailed engineering specifications and close QA/QC monitoring during fabrication and testing. In order to address the complex and costly cleanup mission Hanford is looking for ways to apply private sector technologies to the cleanup mission. The Hanford Tanks Initiative (HTI) is a five year, EM 30/50 expense-funded project with a primary objective of demonstrating the extent to which the Hanford Tank Waste Remediation System (TWRS) tanks can be cleaned using commercially available technologies. To accomplish this objective, in August 1996 HTI issued a Request for Proposal (RFP) for services to remove the hard heel waste from tank 241-C-106, following retrieval of the majority of the waste by sluicing. While certain specification guidance was provided in the RFP such as, must be capable of operation in a flammable gas environment, the RFP was careful in avoiding language that would place limitations on the technologies that industry could provide. The challenge for HTI was to develop a licensing strategy that would provide maximum flexibility to the technology vendors while meeting the stringent documentation requirements of the US Department of Energy (DOE). This strategy must also provide assurance that the technology can be shown to be within the TWRS authorization basis and be safely deployed. A 35-step process (Figure 1) was developed by HTI to accomplish this objective.

  10. Public health council

    International Nuclear Information System (INIS)

    1979-01-01

    The internal matters of the council are reported followed by reports from the individual committees. These include committees of radiation hygiene, food irradiation, the disposal of radioactive waste and the classification of isotope laboratories, guide-lines for radiation protection in hospitals and clinics, isotope laboratories, legal liability for radiation accidents, nuclear heart stimulators, computer tomography, supplementary advice about nuclear energy, combustion furnace for radioactive waste, and experiments with radioactive materials on testees. Each report describes the setting up of the committee, the members, its function with a short description of the work completed in 1977. (Auth.)

  11. Technical investigation in solid waste to energy facilities and selection of suitable incineration technology for Tehran

    International Nuclear Information System (INIS)

    Mokarizdeh, V.; Lari, H.R.

    2001-01-01

    Incineration is another way for producing electrical energy. There are various methods for incineration as Stoker Fired, Suspension Fired, Rotary Kiln, Cyclone and Fluidized Bed; that each one has it's own advantages and disadvantages. Selecting suitable one for establishment in Tehran depends on many parameters like technical, economical and environmental factors. Comparing the various technologies due to the mentioned parameters by Multi Criteria Decision Making method shows that stoker-fired incinerator is the best one for the Capital City

  12. Possibilities of technologies that replace in-patient facilities in uroandrology

    Directory of Open Access Journals (Sweden)

    T. I. Derevyanko

    2015-01-01

    Full Text Available One of the main directions in improvement of medical service became invasion of stationary substitute technologies. In Stavropol since 2007 has been organized the Men, s health protection service based on Regional clinical specialized uroandrological center. In uroandrological short stay surgical department successfully provides treatment in all forms of male genital in children and adult pathology with using minimally invasive methodics in short stay conditions and absence postsurgical complications. The operation rooms are staffed with all necessary equipment for carry out activities in full volume. All patients treated in urological department had sorted by anaesthesiological and somatic criterias.The main strategical directions are male reproductive health, pediatric urology-andrology, oncouroandrology. Human resources, high technology staff and intelligent work organization are fundamental for modern stationary substitute service. Human resource conception is urologist-andrologist – urologist – surgeon with laparoscopic, transurethral, microsurgery, reconstructive and plastic technique with endocrinology and psychiatric skills.Work indicators of medical center tells about high effectiveness and possibility of release profile urological beds for “big” surgical help and transfer male genital surgery on stationary substitute technologies.

  13. A study on relationship between information technology facilities and performance of banking industry

    Directory of Open Access Journals (Sweden)

    M. Khodaei Valahzaghard

    2013-03-01

    Full Text Available The recent advances on information technology have made tremendous change on traditional banking. These days, people do not carry cash and prefer to use electronic devices such as point of sale system (POS or PIN entry devices (PinPad to do desirable transactions. These technologies could facilitate e-business and increase profitability in various industries including banking sector. The purpose of this paper is to investigate the effect of five new products namely ATM, POS Machines, PinPad machines, online and swift branches on banking performance indicators including return on assets (ROA, return on equities (ROE and operating investment return (OIR. We use the information of 19 private and governmental banks, which were active in Iran over the period of 2005-2010. The study uses linear regression analysis as well as VAR technique to study the effects of the independent variables on bank performance indicators. The results indicate that while there are some weak and positive relationships between three technology indicators including POS, PinPad and online businesses and ROA as well as ROE, there is relatively strong and positive relationship between these three independent variables and OIR. In addition, while the results of VAR analysis have shown that any reduction on PinPad will reduce OIR but this reduction will disappear after approximately four periods.

  14. Grout disposal facility vault exhauster: Technical background document on demonstration of best available control technology for toxics

    International Nuclear Information System (INIS)

    Glissmeyer, J.A.; Glantz, C.S.; Rittman, P.D.

    1994-09-01

    The Grout Disposal Facility (GDF) is currently operated on the US Department of Energy's Hanford Site. The GDF is located near the east end of the Hanford Site's 200 East operations area, and is used for the treatment and disposal of low-level radioactive liquid wastes. In the grout treatment process, selected radioactive wastes from double-shell tanks are mixed with grout-forming solids; the resulting grout slurry is pumped to near-surface concrete vaults for solidification and permanent disposal. As part of this treatment process, small amounts of toxic particles and volatile organic compounds (VOCs) may be released to the atmosphere through the GDF's exhaust system. This analysis constitutes a Best Available Control Technology for Toxics (T-BACT) study, as required in the Washington Administrative Code (WAC 173-460) to support a Notice of Construction for the operation of the GDF exhaust system at a modified flow rate that exceeds the previously permitted value. This report accomplishes the following: assesses the potential emissions from the GDF; estimates air quality impacts to the public from toxic air pollutants; identifies control technologies that could reduce GDF emissions; evaluates impacts of the control technologies; and recommends appropriate emissions controls

  15. News from Council

    CERN Multimedia

    2016-01-01

    With this message I would like to share with you some highlights of this week’s Council meetings.   A major topic was the approval of CERN’s Medium Term Plan (MTP) 2017-2021, along with the budget for 2017. In approving the document, Council expressed its very strong support for the research programme the MTP outlines for the coming years.  Another important topic this week was the formal approval of the High Luminosity LHC project, HL-LHC. This comes as extremely good news not only for CERN, but also for particle physics globally. HL-LHC is the top priority of the European Strategy for Particle Physics in its 2013 update, and is part of the 2016 roadmap of the European Strategy Forum on Research Infrastructures, ESFRI. It was also identified as a priority in the US P5 strategy process, and in Japan’s strategic vision for the field. It secures CERN’s future until 2035, and ensures that we will achieve the maximum scientific return on the investment...

  16. Fusion technology development: first wall/blanket system and component testing in existing nuclear facilities

    International Nuclear Information System (INIS)

    Hsu, P.Y.S.; Bohn, T.S.; Deis, G.A.; Judd, J.L.; Longhurst, G.R.; Miller, L.G.; Millsap, D.A.; Scott, A.J.; Wessol, D.E.

    1980-12-01

    A novel concept to produce a reasonable simulation of a fusion first wall/blanket test environment employing an existing nuclear facility, the Engineering Test Reactor at the Idaho National Engineering Laboratory, is presented. Preliminary results show that an asymmetric, nuclear test environment with surface and volumetric heating rates similar to those expected in a fusion first wall/blanket or divertor chamber surface appears feasible. The proposed concept takes advantage of nuclear reactions within the annulus of an existing test space (15 cm in diameter and approximately 100 cm high) to provide an energy flux to the surface of a test module. The principal reaction considered involves 3 He in the annulus as follows: n + 3 He → p + t + 0.75 MeV. Bulk heating in the test module is accomplished by neutron thermalization, gamma heating, and absorption reactions involving 6 Li in the blanket breeding region. The concept can be extended to modified core configurations that will accommodate test modules of different sizes and types. It makes possible development testing of first wall/blanket systems and other fusion components on a scale and in ways not otherwise available until actual high-power fusion reactors are built

  17. Development of control technology for HTTR hydrogen production system with mock-up test facility

    International Nuclear Information System (INIS)

    Ohashi, Hirofumi; Inaba, Yoshitomo; Nishihara, Tetsuo; Takeda, Tetsuaki; Hayashi, Koji; Takada, Shoji; Inagaki, Yoshiyuki

    2006-01-01

    The Japan Atomic Energy Agency has been planning the demonstration test of hydrogen production with the High Temperature Engineering Test Reactor (HTTR). In a HTTR hydrogen production system (HTTR-H2), it is required to control a primary helium temperature within an allowable value at a reactor inlet to prevent a reactor scram. A cooling system for a secondary helium with a steam generator (SG) and a radiator is installed at the downstream of a chemical rector in a secondary helium loop in order to mitigate the thermal disturbance caused by the hydrogen production system. Prior to HTTR-H2, the simulation test with a mock-up test facility has been carried out to establish the controllability on the helium temperature using the cooling system against the loss of chemical reaction. It was confirmed that the fluctuations of the helium temperature at chemical reactor outlet, more than 200 K, at the loss of chemical reaction could be successfully mitigated within the target of ±10 K at SG outlet. A dynamic simulation code of the cooling system for HTTR-H2 was verified with the obtained test data

  18. Developing a clinical proton accelerator facility: Consortium-assisted technology transfer

    International Nuclear Information System (INIS)

    Slater, J.M.; Miller, D.W.; Slater, J.W.

    1991-01-01

    A hospital-based proton accelerator facility has emerged from the efforts of a consortium of physicists, engineers and physicians from several high-energy physics laboratories, industries and universities, working together to develop the requirements and conceptual design for a clinical program. A variable-energy medical synchrotron for accelerating protons to a prescribed energy, intensity and beam quality, has been placed in a hospital setting at Loma Linda University Medical Center for treating patients with localized cancer. Treatments began in October 1990. Scientists from Fermi National Accelerator Laboratory; Harvard Cyclotron Laboratory; Lawrence Berkeley Laboratories; the Paul Scherrer Institute; Uppsala, Sweden; Argonne, Brookhaven and Los Alamos National Laboratories; and Loma Linda University, all cooperated to produce the conceptual design. Loma Linda University contracted with Fermi National Accelerator Laboratory to design and build a 250 MeV synchrotron and beam transport system, the latter to guide protons into four treatment rooms. Lawrence Berkeley Laboratories consulted with Loma Linda University on the design of the beam delivery system (nozzle). A gantry concept devised by scientists at Harvard Cyclotron Laboratory, was adapted and fabricated by Science Applications International Corporation. The control and safety systems were designed and developed by Loma Linda University Radiation Research Laboratory. Presently, the synchrotron, beam transport system and treatment room hardware have been installed and tested and are operating satisfactorily

  19. Development of corrective measures and site stabilization technologies for shallow land burial facilities at semiarid sites

    International Nuclear Information System (INIS)

    Nyhan, J.W.; Abeele, W.V.

    1986-01-01

    The overall purpose of the corrective measures task performed for the National Low-Level Waste Management Program has been to develop and test methods that can be used to correct any actual or anticipated problems with new and existing shallow land burial (SLB) sites in a semiarid environment. These field tests have not only evaluated remedial actions, but have also investigated phenomena suspected of being a possible problem at semiarid SLB sites. The approach we have taken in developing remedial action and site closure technologies for low-level waste sites is to recognize that physical and biological processes affecting site integrity are interdependent, and therefore, cannot be treated as separate problems. The field experiments performed for this task were to identify, evaluate, and model erosion control technologies, field test second generation biointrusion barriers, determine by field experiments the extent of upward radionuclide migration due to moisture cycling, and measure the effects of subsidence on remedial action of other system components. Progress made in each of these research areas is described

  20. Assessment of technologies for hazardous waste site remediation: Non-treatment technologies and pilot scale facility implementation -- excavation -- storage technology -- safety analysis and review statement. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, H.R.; Overbey, W.K. Jr.; Koperna, G.J. Jr.

    1994-02-01

    The purpose of this study is to assess the state-of-the-art of excavation technology as related to environmental remediation applications. A further purpose is to determine which of the excavation technologies reviewed could be used by the US Corp of Engineers in remediating contaminated soil to be excavated in the near future for construction of a new Lock and Dam at Winfield, WV. The study is designed to identify excavation methodologies and equipment which can be used at any environmental remediation site but more specifically at the Winfield site on the Kanawha River in Putnam County, West Virginia. A technical approach was determined whereby a functional analysis was prepared to determine the functions to be conducted during the excavation phase of the remediation operations. A number of excavation technologies were identified from the literature. A set of screening criteria was developed that would examine the utility and ranking of the technologies with respect to the operations that needed to be conducted at the Winfield site. These criteria were performance, reliability, implementability, environmental safety, public health, and legal and regulatory compliance. The Loose Bulk excavation technology was ranked as the best technology applicable to the Winfield site. The literature was also examined to determine the success of various methods of controlling fugitive dust. Depending upon any changes in the results of chemical analyses, or prior remediation of the VOCs from the vadose zone, consideration should be given to testing a new ``Pneumatic Excavator`` which removes the VOCs liberated during the excavation process as they outgas from the soil. This equipment however would not be needed on locations with low levels of VOC emissions.

  1. Assessment of technologies for hazardous waste site remediation: Non-treatment technologies and pilot scale facility implementation -- excavation -- storage technology -- safety analysis and review statement

    International Nuclear Information System (INIS)

    Johnson, H.R.; Overbey, W.K. Jr.; Koperna, G.J. Jr.

    1994-02-01

    The purpose of this study is to assess the state-of-the-art of excavation technology as related to environmental remediation applications. A further purpose is to determine which of the excavation technologies reviewed could be used by the US Corp of Engineers in remediating contaminated soil to be excavated in the near future for construction of a new Lock and Dam at Winfield, WV. The study is designed to identify excavation methodologies and equipment which can be used at any environmental remediation site but more specifically at the Winfield site on the Kanawha River in Putnam County, West Virginia. A technical approach was determined whereby a functional analysis was prepared to determine the functions to be conducted during the excavation phase of the remediation operations. A number of excavation technologies were identified from the literature. A set of screening criteria was developed that would examine the utility and ranking of the technologies with respect to the operations that needed to be conducted at the Winfield site. These criteria were performance, reliability, implementability, environmental safety, public health, and legal and regulatory compliance. The Loose Bulk excavation technology was ranked as the best technology applicable to the Winfield site. The literature was also examined to determine the success of various methods of controlling fugitive dust. Depending upon any changes in the results of chemical analyses, or prior remediation of the VOCs from the vadose zone, consideration should be given to testing a new ''Pneumatic Excavator'' which removes the VOCs liberated during the excavation process as they outgas from the soil. This equipment however would not be needed on locations with low levels of VOC emissions

  2. Technology development for the design of shallow land burial facilities at arid sites

    International Nuclear Information System (INIS)

    Nyhan, J.W.; Abeele, W.V.; Cokal, E.J.; Perkins, B.A.; Lane, L.J.

    1984-01-01

    The field research program involving technology development for arid shallow land burial (SLB) sites is described. Field tests of biointrusion barriers at waste disposal sites and in experimental plots at Los Alamos are reported. Results of completed and on-going experiments with migration barriers for water and contaminant movement are presented. An envelope wick experiment for subsurface water management is described, and preliminary field data are reported. An integrated field experiment was designed to test individual SLB component tests related to erosion control, biobarriers, and subsurface capillary and migration barriers, and the progress made in emplacing the experiment is presented. Efforts to utilize the field data collected to validate hydrologic models (TRACR3D) important to waste management strategies are also presented. 11 references, 14 figures, 1 table

  3. Review of Maintenance and Repair Times for Components in Technological Facilities

    Energy Technology Data Exchange (ETDEWEB)

    L. C. Cadwallader

    2012-11-01

    This report is a compilation of some unique component repair time data and it also presents citations of more extensive reports where lists of repair times can be found. This collection of information should support analysts who seek to quantify maintainability and availability of high technology and nuclear energy production systems. While there are newer sources of repair time information, most, if not all, of the newer sources are proprietary and cannot be shared. This report offers data that, while older, is openly accessible and can serve as reasonable estimates of repair times, at least for initial studies. Some times were found for maintenance times in radiation environments, and some guidance for multiplicative factors to use to account for work in contamination areas.

  4. Development of technology for the design of shallow land burial facilities at arid sites

    International Nuclear Information System (INIS)

    Nyhan, J.W.; Abeele, W.V.; Drennon, B.J.; Herrera, W.J.; Lopez, E.A.; Langhorst, G.J.; Stallings, E.A.; Walker, R.D.; Martinez, J.L.

    1985-01-01

    The Los Alamos field research program involving technology development for arid shallow land burial (SLB) sites is described. Field data are presented for an integrated field experiment, which was designed to test individual SLB component experiments related to erosion control, biobarriers, and subsurface capillary and migration barriers. Field tests of biointrusion barriers at waste disposal sites and in experimental plots are reported. The results of a joint DOE/NRC experiment to evaluate leaching and transport of sorbing (Cs, Sr, Li) and nonsorbing (I, Br) solutes in sandy silt backfill are presented for steady-state and unsteady-state flow conditions. A capillary barrier experiment performed in a large caisson (3-m diameter, 6.1 m deep) is described and a year's worth of field data is presented

  5. 40 CFR 1508.6 - Council.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Council. 1508.6 Section 1508.6 Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY TERMINOLOGY AND INDEX § 1508.6 Council. Council means the Council on Environmental Quality established by title II of the Act. ...

  6. ITER council proceedings: 2000

    International Nuclear Information System (INIS)

    2001-01-01

    No ITER Council Meetings were held during 2000. However, two ITER EDA Meetings were held, one in Tokyo, January 19-20, and one in Moscow, June 29-30. The parties participating in these meetings were those that partake in the extended ITER EDA, namely the EU, the Russian Federation, and Japan. This document contains, a/o, the records of these meetings, the list of attendees, the agenda, the ITER EDA Status Reports issued during these meetings, the TAC (Technical Advisory Committee) reports and recommendations, the MAC Reports and Advice (also for the July 1999 Meeting), the ITER-FEAT Outline Design Report, the TAC Reports and Recommendations both meetings), Site requirements and Site Design Assumptions, the Tentative Sequence of technical Activities 2000-2001, Report of the ITER SWG-P2 on Joint Implementation of ITER, EU/ITER Canada Proposal for New ITER Identification

  7. Results concerning a clean co-combustion technology of waste biomass with fossil fuel, in a pilot fluidised bed combustion facility

    Energy Technology Data Exchange (ETDEWEB)

    Ionel, Ioana; Trif-Tordai, Gavril; Ungureanu, Corneliu; Popescu, Francisc; Lontis, Nicolae [Politehnica Univ. Timisoara (Romania). Faculty for Mechanical Engineering

    2008-07-01

    The research focuses on a facility, the experimental results, interpretation and future plans concerning a new developed technology of using waste renewable energy by applying the cocombustion of waste biomass with coal, in a fluidised bed system. The experimental facility is working entirely in accordance to the allowed limits for the exhaust flue gas concentration, with special concern for typical pollutants. The experiments conclude that the technology is cleaner, has as main advantage the possibility to reduce both the SO{sub 2} and CO{sub 2} exhaust in comparison to standard fossil fuel combustion, under comparable circumstances. The combustion is occurring in a stable fluidised bed. (orig.)

  8. Trump revives National Space Council

    Science.gov (United States)

    Johnston, Hamish

    2017-08-01

    US president Donald Trump has signed an executive order to re-establish the US National Space Council. The 12-member council will include key government officials with an interest in space exploration, including NASA’s acting administrator Robert Lightfoot and the secretaries of state, commerce and defence.

  9. Overview of remote handling technologies developed for inspection and maintenance of spent fuel management facilities in France

    Energy Technology Data Exchange (ETDEWEB)

    Desbats, Philippe [CEA - Direction de la Recherche Technologique / LIST, BP 6 - 92265, Fontenay-aux-Roses cedex (France); Piolain, Gerard [COGEMA-HAG/DMCO, AREVA NC SA, 2, rue Paul Dautier, BP 4, 78 141 Velizy Cedex (France)

    2006-07-01

    In the facilities of the end of the nuclear fuel cycle, like spent fuel storage pools, reprocessing plants, Plutonium-based fuel manufacturing plants or waste temporary storage units, materials handling must be carried out remotely, taking into account the nuclear radiating environment. In addition to the automation requirement, robotics equipment in the nuclear industry must be substituted to human operators in order to respect the ALARA principle. More over, remote handling technologies aim to improve the working conditions, as well as the quality of the work achieved by the operators. Ten years ago, COGEMA (AREVA Group) and CEA (French Atomic Energy Agency) started an ambitious R and D program in robotics and remote handling technologies applied to COGEMA spent fuel management facilities in France, with the aim to cover the requirements of the different plant life cycle steps. The paper gives an overview of the important developments that have been carried out by CEA and then transferred to the COGEMA industrial group. The range includes the next generation of servo-manipulators, long range inspection tools and carriers, nuclear versions of industrial robots, radiation hardened electronic systems, interactive environment modeling tools, as well as force-feedback master-slave generic control software for tele-operation systems. Some applications of this development are presented in the paper: - rad-hard electronic modules for robotic equipment which are used by COGEMA in high radiating environment; - long reach articulated carrier for inspection of spent full management blind cells; - new electrical force feedback master/slave system to improve the tele-operation of standard tele-manipulators; - generic control software for tele-manipulators. The results of the robotic program carried out by COGEMA and CEA have been very valuable for the introduction of new technologies inside nuclear industry. Innovative products and sub-systems can be integrated now in a large

  10. Engaging Communities in Commodity Stock Monitoring Using Telecommunication Technology in Primary Health Care Facilities in Rural Nigeria

    Directory of Open Access Journals (Sweden)

    Ugo Okoli

    2015-10-01

    Full Text Available Background: With several efforts being made by key stakeholders to bridge the gap between beneficiaries and their having full access to free supplies, frequent stock-out, pilfering, collection of user fees for health commodities, and poor community engagement continue to plague the delivery of health services at the primary health care (PHC level in rural Nigeria. Objective: To assess the potential in the use of telecommunication technology as an effective way to engage members of the community in commodity stock monitoring, increase utilization of services, as well as promote accountability and community ownership. Methods: The pilot done in 8 PHCs from 4 locations within Nigeria utilized telecommunication technologies to exchange information on stock monitoring. A triangulated technique of data validation through cross verification from 3 subsets of respondents was used: 160 ward development committee (WDC members, 8 officers-in-charge (OICs of PHCs, and 383 beneficiaries (health facility users participated. Data collection made through a call center over a period of 3 months from July to September 2014 focused on WDC participation in inventory of commodities and type and cost of maternal, neonatal, and child health services accessed by each beneficiary. Results: Results showed that all WDCs involved in the pilot study became very active, and there was a strong cooperation between the OICs and the WDCs in monitoring commodity stock levels as the OICs participated in the monthly WDC meetings 96% of the time. A sharp decline in the collection of user fees was observed, and there was a 10% rise in overall access to free health care services by beneficiaries. Conclusion: This study reveals the effectiveness of mobile phones and indicates that telecommunication technologies can play an important role in engaging communities to monitor PHC stock levels as well as reduce the incidence of user fees collection and pilfering of commodities (PHC level in

  11. A uranium enrichment facility safeguards technology based on the separation nozzle process

    International Nuclear Information System (INIS)

    Bahm, W.; Weppner, J.; Didier, H.J.

    1979-01-01

    Under the Trilateral Agreement between Brazil, the Federal Republic of Germany and the IAEA an enrichment plant operating on the basis of the separation nozzle process, will be safeguarded under INFCIRC/66/Rev.2. For nuclear materials balancing purposes the plant has been subdivided into 17 key measuring points to assess the nuclear material flow and the nuclear material inventory. Preliminary studies have indicated that the balancing accuracy required for safeguards purposes cannot be achieved by only using the foreseen in-plant measuring systems, since considerable quantities of enriched uranium cannot be covered in this way. This fraction will merely be estimated by the operator and thus cannot be verified by the inspection authorities. The plant components, whose inventories could not be verified in the first estimate of the balancing accuracy referred to above by means of the in-plant measuring systems, also include the low-temperature separators of the cascade shoulder and the product. Assessing and verifying the inventories of these key measuring points is particularly important because of the enrichment (some 3% 235 U for the product) and the relatively large inventory and, hence, the considerable contribution to the balancing inaccuracy. An estimate of the balancing inaccuracy on the basis of the measuring uncertainties to be expected in the light of the present status of technology indicated values between 0.2 and 0.3% relative to the feed flow with semi-annual inventory-taking. However, this is based on the condition that the experiments planned to determine the inventories of cryogenic separators confirm the measuring uncertainties underlying the calculation

  12. 2011 Elections to Staff Council

    CERN Multimedia

    Association du personnel

    2011-01-01

    Elections Timetable Starting with Echo of 26 September, posters, etc. call for applications Wednesday 26 October, at noon closing date for receipt of the application Monday 31 October, at noon start date for voting Monday 14 November, at noon closing date for voting Monday 21 November, publication of the results in Echo Tuesday 22 and Wednesday 29 November Staff Association Assizes Tuesday 6 December, at 10.00 a.m. first meeting of the new Staff Council and election of the new Executive Committee The voting procedure will be monitored by the Election Committee, which is also in charge of announcing the results in Echo on 21 November. In its meeting on 19 September 2011, the Electoral Commission decided on the following distribution of seats in colleges 0.1 to 0.6: Sector Department Career path AA – A – B – C – D Career path E – F – G – H Accelerators and Technology BE TE EN Electoral college 0.1 18 si&e...

  13. 2013 Elections to Staff Council

    CERN Multimedia

    Staff Association

    2013-01-01

    Elections Timetable Starting with Echo of 16 September, posters, etc. call for applications Monday 21 October, at noon closing date for receipt of the applications Monday 28 October, at noon start date for voting Monday 11 November, at noon closing date for voting Monday 18 and Monday 25 November, publication of the results in Echo Tuesday 19 November Staff Association Assizes Tuesday 3 December, at 10.00 a.m. first meeting of the new Staff Council and election of the new Executive Committee The voting procedure is monitored by the Election Committee, which is also in charge of announcing the results in Echo on 18 and 25 November. n its meeting on 11 September 2013, the Electoral Commission decided on the following distribution of seats in colleges O.1 to O.6: Sectors Departments Career paths AA – A – B – C – D Career paths E – F – G – H Accelerators and Technology BE TE EN Electoral college 0.1 13 si&...

  14. 2013 Elections to Staff Council

    CERN Multimedia

    Staff Association

    2013-01-01

    Elections Timetable Starting with Echo of 16 September, posters, etc. call for applications Monday 21 October, at noon closing date for receipt of the applications Monday 28 October, at noon start date for voting Monday 11 November, at noon closing date for voting Monday 18 and Monday 25 November, publication of the results in Echo Tuesday 19 November Staff Association Assizes Tuesday 3 December, at 10.00 a.m. first meeting of the new Staff Council and election of the new Executive Committee The voting procedure is monitored by the Election Committee, which is also in charge of announcing the results in Echo on 18 and 25 November. n its meeting on 11 September 2013, the Electoral Commission decided on the following distribution of seats in colleges O.1 to O.6: Sectors Departments Career paths AA – A – B – C – D Career paths E – F – G – H Accelerators and Technology BE TE EN Electoral colle...

  15. Technology demonstration for reducing mercury emissions from small-scale gold refining facilities.

    Energy Technology Data Exchange (ETDEWEB)

    Habegger, L. J.; Fernandez, L. E.; Engle, M.; Bailey, J. L.; Peterson, D. P.; MacDonell, M. M.; U.S. Environmental Protection Agency

    2008-06-30

    Gold that is brought from artisanal and small-scale gold mining areas to gold shops for processing and sale typically contains 5-40% mercury. The uncontrolled removal of the residual mercury in gold shops by using high-temperature evaporation can be a significant source of mercury emissions in urban areas where the shops are located. Emissions from gold shop hoods during a burn can exceed 1,000 mg/m{sup 3}. Because the saturation concentration of mercury vapor at operating temperatures at the hood exhaust is less than 100 mg/m{sup 3}, the dominant component of the exhaust is in the form of aerosol or liquid particles. The U.S. Environmental Protection Agency (EPA), with technical support from Argonne National Laboratory (Argonne), has completed a project to design and test a technology to remove the dominant aerosol component in the emissions from gold shops. The objective was to demonstrate a technology that could be manufactured at low cost and by using locally available materials and manufacturing capabilities. Six prototypes designed by Argonne were locally manufactured, installed, and tested in gold shops in Itaituba and Creporizao, Brazil. The initial prototype design incorporated a pebble bed as the media for collecting the mercury aerosols, and a mercury collection efficiency of over 90% was demonstrated. Though achieving high efficiencies, the initial prototype was determined to have practical disadvantages such as excessive weight, a somewhat complex construction, and high costs (>US$1,000). To further simplify the construction, operation, and associated costs, a second prototype design was developed in which the pebble bed was replaced with slotted steel baffle plates. The system was designed to have flexibility for installation in various hood configurations. The second prototype with the baffle plate design was installed and tested in several different hood/exhaust systems to determine the optimal installation configuration. The significance of

  16. 76 FR 34230 - Technological Advisory Council

    Science.gov (United States)

    2011-06-13

    .... to 4 p.m. at the Federal Communications Commission, 445 12th Street, SW., Washington, DC 20554. DATES: June 29, 2011. ADDRESSES: Federal Communications Commission, 445 12th Street, SW., Washington, DC 20554... as many people as possible. However, admittance will be limited to seating availability. Meetings are...

  17. FINESSE: study of the issues, experiments and facilities for fusion nuclear technology research and development. Interim report. Volume I

    International Nuclear Information System (INIS)

    Abdou, M.

    1984-10-01

    The following chapters are included in this study: (1) fusion nuclear issues, (2) survey of experimental needs, (3) requirements of the experiments, (4) non-fusion facilities, (5) fusion facilities for nuclear experiments, and (6) fusion research and development scenarios

  18. Developing a systems framework for sustainable infrastructure technologies (SIT) in the built environment focussing on health facilities: A case for Cape Town

    CSIR Research Space (South Africa)

    Saidi, M

    2007-05-01

    Full Text Available The objective of the study is to develop a systems framework for the implementation and management of sustainable infrastructure technologies in the built environment with specific focus on health facilities. It look at the global trends and drivers...

  19. The use of surveillance technology in residential facilities for people with dementia or intellectual disabilities: a study among nurses and support staff.

    NARCIS (Netherlands)

    Niemeijer, A.R.; Depla, M.; Hertogh, C.; Frederiks, B.; Francke, A.

    2014-01-01

    Background: The use of surveillance technology in residential care facilities for people with dementia or intellectual disabilities is often promoted both as a solution to understaffing and as a means to increasing clients' autonomy. But there are fears that such use might attenuate the care

  20. Future technological and economic performance of IGCC and FT production facilities with and without CO2 capture: Combining component based learning curve and bottom-up analysis

    NARCIS (Netherlands)

    Knoope, M.M.J.; Meerman, J.C.; Ramirez, C.A.; Faaij, A.P.C.

    2013-01-01

    This study aims to investigate the technological and economic prospects of integrated gasification facilities for power (IGCC) and Fischer–Tropsch (FT) liquid production with and without CCS over time. For this purpose, a component based experience curve was constructed and applied to identify the

  1. News from the CERN Council

    CERN Multimedia

    The CERN Council today thanked the Organization’s outgoing management, and welcomed in the new. Outgoing Director General Robert Aymar, looked back on his five years at the helm, while new Director General, Rolf Heuer, presented his vision for the future. In other Council business, Romania was welcomed as a Candidate for Accession as Member State of CERN; and the groundwork was laid for a study of geographical and scientific extension of the role of CERN. Council also established the practical procedures for following projects relevant to the European Strategy for Particle Physics. Consult the complete Press Release.

  2. A facile approach to manufacturing non-ionic surfactant nanodipsersions using proniosome technology and high-pressure homogenization.

    Science.gov (United States)

    Najlah, Mohammad; Hidayat, Kanar; Omer, Huner K; Mwesigwa, Enosh; Ahmed, Waqar; AlObaidy, Kais G; Phoenix, David A; Elhissi, Abdelbary

    2015-03-01

    In this study, a niosome nanodispersion was manufactured using high-pressure homogenization following the hydration of proniosomes. Using beclometasone dipropionate (BDP) as a model drug, the characteristics of the homogenized niosomes were compared with vesicles prepared via the conventional approach of probe-sonication. Particle size, zeta potential, and the drug entrapment efficiency were similar for both size reduction mechanisms. However, high-pressure homogenization was much more efficient than sonication in terms of homogenization output rate, avoidance of sample contamination, offering a greater potential for a large-scale manufacturing of noisome nanodispersions. For example, high-pressure homogenization was capable of producing small size niosomes (209 nm) using a short single-step of size reduction (6 min) as compared with the time-consuming process of sonication (237 nm in >18 min) and the BDP entrapment efficiency was 29.65% ± 4.04 and 36.4% ± 2.8. In addition, for homogenization, the output rate of the high-pressure homogenization was 10 ml/min compared with 0.83 ml/min using the sonication protocol. In conclusion, a facile, applicable, and highly efficient approach for preparing niosome nanodispersions has been established using proniosome technology and high-pressure homogenization.

  3. Safety assesment necessary in selecting the technologies for partial decommissioning of nuclear facilities. Application to research reactors

    International Nuclear Information System (INIS)

    Niculae, O.; Stan, C.; Vladescu, G.

    2005-01-01

    The main goal of this work is identification and evaluation of safety indicators - quantities used in monitoring the safety assurance during decommissioning processes in nuclear facilities identification of safety indicators is made on basis of qualitative and quantitative analysis, effected for both normal decommissioning, as well as in case of foreseen event occurrence. The safety indicators form an integrated system which can be represented by a pyramidal structural with the following levels (in increasing complexity order): specific indicators, strategic indicators, overall indicators, safety closure. This work suggests that evaluation of safety assurance level during the conduct of a decommissioning process to be based on the overall analysis of the set of indicators emphasizing not only the evaluation of individual safety indicators but also the interdependencies between them. The evaluation method is based on the 'step-by-step' principle. The evaluation was carried-out either directly or by means of dedicated evaluation forms which cover both quantitative and qualitative aspects of the analysis. At the some time identified are the adequate protection measures for the personnel implied in decommissioning, as well as for population and environment. The paper present also technologies adequate in the decommissioning. (authors)

  4. Expedited technology demonstration project (Revised mixed waste management facility project) Project baseline revision 4.0 and FY98 plan

    International Nuclear Information System (INIS)

    Adamson, M. G.

    1997-01-01

    The re-baseline of the Expedited Technology Demonstration Project (Revised Mixed Waste Facility Project) is designated as Project Baseline Revision 4.0. The last approved baseline was identified as Project Baseline Revision 3.0 and was issued in October 1996. Project Baseline Revision 4.0 does not depart from the formal DOE guidance followed by, and contained in, Revision 3.0. This revised baseline document describes the MSO and Final Forms testing activities that will occur during FY98, the final year of the ETD Project. The cost estimate for work during FY98 continues to be $2.OM as published in Revision 3.0. However, the funds will be all CENRTC rather than the OPEX/CENTRC split previously anticipated. LLNL has waived overhead charges on ETD Project CENRTC funds since the beginning of project activities. By requesting the $2.OM as all CENTRC a more aggressive approach to staffing and testing can be taken. Due to a cost under- run condition during FY97 procurements were made and work was accomplished, with the knowledge of DOE, in the Feed Preparation and Final Forms areas that were not in the scope of Revision 3.0. Feed preparation activities for FY98 have been expanded to include the drum opening station/enclosure previously deleted

  5. Manufacturing the Future: Federal Priorities for Manufacturing Research and Development. Report of the Interagency Working Group on Manufacturing R&D, Committee on Technology, National Science and Technology Council

    Science.gov (United States)

    2008-03-01

    coolant manifolds are constructed on-site. Each connector must be separately cut, prepared, and joined to the subsystem. Prefabrication of...to prepare students for careers in the Manufacturing and Science, Technology, Engineering, and Mathematics career clusters. EPA Ecological and...nanomaterials, along with exposures of human and other species in natural ecosystems to nanomaterials, and industrial ecology related to nanomaterials

  6. 75 FR 12507 - Manufacturing Council

    Science.gov (United States)

    2010-03-16

    ... in the selection of Council members include candidates' proven experience in developing and marketing... contact information such as mailing address, fax, e-mail, fixed and mobile phone numbers and support staff...

  7. 78 FR 44187 - National Women's Business Council

    Science.gov (United States)

    2013-07-23

    ... SMALL BUSINESS ADMINISTRATION National Women's Business Council ACTION: Notice of open Federal..., and agenda for the next meeting of the National Women's Business Council (NWBC). The meeting will be... the meeting of the National Women's Business Council. The National Women's Business Council is tasked...

  8. 77 FR 40400 - National Women's Business Council

    Science.gov (United States)

    2012-07-09

    ... SMALL BUSINESS ADMINISTRATION National Women's Business Council AGENCY: U.S. Small Business... Business Council (NWBC). The meeting will be open to the public. DATES: The meeting will be held on July 17... Business Council. The National Women's Business Council is tasked with providing policy recommendations on...

  9. Council | About IASc | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Council. The affairs and property of the Academy are administered by a Council of 20, consisting of a President, four Vice-Presidents, a Treasurer, two Secretaries, and twelve other members. The Council, with a term of three years, is elected by the Fellows triennially. Members of the Council for the period 2016 to 2018:.

  10. 76 FR 55363 - Pacific Fishery Management Council; Public Meeting

    Science.gov (United States)

    2011-09-07

    ... Pacific Fishery Management Council's (Pacific Council) Groundfish Management Team (GMT) [[Page 55364... Fishery Management Council; Public Meeting AGENCY: National Marine Fisheries Service (NMFS), National...; telephone: (206) 526-6150. Council address: Pacific Fishery Management Council, 7700 NE Ambassador Place...

  11. 77 FR 75614 - Pacific Fishery Management Council; Public Meeting

    Science.gov (United States)

    2012-12-21

    ... Pacific Fishery Management Council's (Pacific Council) Highly Migratory Species Management Team (HMSMT... Fishery Management Council; Public Meeting AGENCY: National Marine Fisheries Service (NMFS), National.... Council address: Pacific Fishery Management Council, 7700 NE. Ambassador Place, Suite 101, Portland, OR...

  12. 75 FR 80470 - Pacific Fishery Management Council; Public Meeting

    Science.gov (United States)

    2010-12-22

    ... Pacific Fishery Management Council's (Council) Groundfish Management Team (GMT) will hold a working... Fishery Management Council; Public Meeting AGENCY: National Marine Fisheries Service (NMFS), National.... Council address: Pacific Fishery Management Council, 7700 NE. Ambassador Place, Suite 101, Portland, OR...

  13. Comparative analysis of Pu spread resistance of chemico-technological (out of pile) complexes of electronuclear molten salt and heavy water blanket facilities for transmutation

    International Nuclear Information System (INIS)

    Volk, V.I.; Vakhrushin, A.Yu.; Gorbunov, V.F.; Kushnikov, V.V.

    1997-01-01

    Technological processes used for radiochemical reprocessing of molten salt and heavy water blankets of an electronuclear facility for Pu transmutation and Pu distribution in those processes are characterized. Below the major parameters are given that affect the resistance of the technological to Pu proliferation. Types of Pu migration: process losses, accident related losses, theft. Factors affecting migration are total inventory of Pu in a reprocessing complex, purity of Pu and its compounds, chemical condition of Pu, the feasibility of equipping technological processes with instruments of control. The comparative analysis carried out taking into account the above parameters established that the technological processes related to heavy water blanket reprocessing, specifically a homogeneous (solution) option, are much more resistant to Pu proliferation, including both Pu migration to the environment and the unsanctioned withdrawal of Pu from the technological process. 5 refs., 4 figs

  14. Highlighting High Performance: National Renewable Energy Laboratory's Thermal Test Facility, Golden, Colorado. Office of Building Technology State and Community Programs (BTS) Brochure

    International Nuclear Information System (INIS)

    Burgert, S.

    2001-01-01

    The National Renewable Energy Laboratory's Thermal Test Facility in Golden, Colorado, was designed using a whole-building approach-looking at the way the building's systems worked together most efficiently. Researchers monitor the performance of the 11,000-square-foot building, which boasts an energy cost savings of 63% for heating, cooling, and lighting. The basic plan of the building can be adapted to many needs, including retail and warehouse space. The Thermal Test Facility contains office and laboratory space; research focuses on the development of energy-efficiency and renewable energy technologies that are cost-effective and environmentally friendly

  15. [Population Council responsible for RU486 clinical trials in USA].

    Science.gov (United States)

    Aguillaume, C J

    1993-04-01

    As a result of the sudden political change that came with the Clinton Administration, RU-486's manufacturer, Roussel-Uclaf, and the Population Council agreed on April 20, 1992, on the manufacture and distribution of RU-486 in the US. In the US, there are less than 1.6 million induced abortions annually. From now on, US women will be able to have a choice between medical and surgical abortion. The Population Council and Roussel-Uclaf have had a contract since 1982. The Council is solely responsible for the phase 2 clinical trial of RU-486 in the US and other countries. It must present to the US Food and Drug Administration (FDA) an amendment allowing it to begin phase 3 clinical trials. The Council will also lead the US medical facilities in this study. It will identify partners for future production of RU-486 and its distribution in the US. It will also submit to FDA a New Drug Application (NDA). FDA will review the scientific literature on RU-486 and evaluate all data submitted by the Population Council. There are still obstacles to be surmounted. The Population Council must demonstrate good judgment when selecting the criteria for choosing a pharmaceutical firm before a Technical Committee which will be part of a group of players promoting women's health, scientific experts, and other interested parties. It must find the necessary funds to conduct the clinical trials and prepare the NDA. Phase 3 clinical trials in the US must have at least 2000 women. They will test RU-486's efficacy, safety, and acceptability among women choosing medical abortion over surgical abortion. Since the Council operates in almost all countries in the world, has innovated contraceptive research and development activities, and has been endorsed by the UN, product approval of RU-486 in the US will affect policy in all countries concerned about abortion.

  16. Strategic avionics technology definition studies. Subtask 3-1A3: Electrical Actuation (ELA) Systems Test Facility

    Science.gov (United States)

    Rogers, J. P.; Cureton, K. L.; Olsen, J. R.

    1994-01-01

    Future aerospace vehicles will require use of the Electrical Actuator systems for flight control elements. This report presents a proposed ELA Test Facility for dynamic evaluation of high power linear Electrical Actuators with primary emphasis on Thrust Vector Control actuators. Details of the mechanical design, power and control systems, and data acquisition capability of the test facility are presented. A test procedure for evaluating the performance of the ELA Test Facility is also included.

  17. Research Support Facility (RSF): Leadership in Building Performance (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2011-09-01

    This brochure/poster provides information on the features of the Research Support Facility including a detailed illustration of the facility with call outs of energy efficiency and renewable energy technologies. Imagine an office building so energy efficient that its occupants consume only the amount of energy generated by renewable power on the building site. The building, the Research Support Facility (RSF) occupied by the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) employees, uses 50% less energy than if it were built to current commercial code and achieves the U.S. Green Building Council's Leadership in Energy and Environmental Design (LEED{reg_sign}) Platinum rating. With 19% of the primary energy in the U.S. consumed by commercial buildings, the RSF is changing the way commercial office buildings are designed and built.

  18. Green power. Renewable electricity purchasing by Leicester City Council

    International Nuclear Information System (INIS)

    2000-05-01

    This case study describes the use of renewable energy by Leicester City Council in the East Midlands. The Council, which has a long-term commitment to sustainable energy and the environment, employs over 14,000 people. A contract was first negotiated with East Midlands Electricity (now PowerGen) to supply the Council's New Walk Centre with green electricity in 1995. Some of the green energy is supplied by the Milford Mill hydroelectric plant. Use of building energy monitoring systems (BEMSs) and other good practice has allowed the Council to achieve a 20% saving in its electricity bill. The Council has also negotiated contracts to supply two smaller sites (a recycling facility called Planet Works and the city's Energy Efficiency centre) with green electricity generated by Beacon Energy, a small renewable energy company which operates two 25 kW wind turbines and two 3 kW arrays of photovoltaic cells at a site some 15 miles from Leicester. The exemption given to renewable energy from the climate change levy makes these schemes even more economic; a worked example is provided to demonstrate the impact of the climate change levy on electricity costs at the New Walk Centre. Six steps to follow when seeking to connect to green electricity are advised

  19. 77 FR 69869 - National Advisory Council on Alcohol Abuse and Alcoholism, National Advisory Council on Drug...

    Science.gov (United States)

    2012-11-21

    ... Alcohol Abuse and Alcoholism, National Advisory Council on Drug Abuse, and National Cancer Advisory Board... Advisory Council on Alcohol Abuse and Alcoholism, National Advisory Council on Drug Abuse, and National...: National Advisory Council on Alcohol Abuse and Alcoholism, National Advisory Council on Drug Abuse, and...

  20. Calculation of dose rate in escape channel of Research Irradiating Facility Army Technology Center using code MCNPX

    International Nuclear Information System (INIS)

    Gomes, Renato G.; Rebello, Wilson F.; Vellozo, Sergio O.; Moreira Junior, Luis; Vital, Helio C.; Rusin, Tiago; Silva, Ademir X.

    2013-01-01

    In order to evaluate new lines of research in the area of irradiation of materials external to the research irradiating facility Army Technology Center (CTEx), it is necessary to study security parameters and magnitude of the dose rates from their channels of escape. The objective was to calculate, with the code MCNPX, dose rates (Gy / min) on the interior and exterior of the four-channel leakage gamma irradiator. The channels were designed to leak radiation on materials properly disposed in the area outside the irradiator larger than the expected volume of irradiation chambers (50 liters). This study aims to assess the magnitude of dose rates within the channels, as well as calculate the angle of beam output range outside the channel for analysis as to its spread, and evaluation of safe conditions of their operators (protection radiological). The computer simulation was performed by distributing virtual dosimeter ferrous sulfate (Fricke) in the longitudinal axis of the vertical drain channels (anterior and posterior) and horizontal (top and bottom). The results showed a collimating the beams irradiated on each of the channels to the outside, with values of the order of tenths of Gy / min as compared to the maximum amount of operation of the irradiator chamber (33 Gy / min). The external beam irradiation in two vertical channels showed a distribution shaped 'trunk pyramid', not collimated, so scattered, opening angle 83 ° in the longitudinal direction and 88 in the transverse direction. Thus, the cases allowed the evaluation of materials for irradiation outside the radiator in terms of the magnitude of the dose rates and positioning of materials, and still be able to take the necessary care in mounting shield for radiation protection by operators, avoiding exposure to ionizing radiation. (author)

  1. 76 FR 67459 - Advisory Council for the Elimination of Tuberculosis (ACET)

    Science.gov (United States)

    2011-11-01

    ... Council for the Elimination of Tuberculosis (ACET) In accordance with section 10(a)(2) of the Federal... Director, CDC, regarding the elimination of tuberculosis. Specifically, the Council makes recommendations... technologies; and reviews the extent to which progress has been made toward eliminating tuberculosis. Matters...

  2. 75 FR 63496 - Advisory Council for the Elimination of Tuberculosis (ACET)

    Science.gov (United States)

    2010-10-15

    ... Council for the Elimination of Tuberculosis (ACET) In accordance with section 10(a)(2) of the Federal... Director, CDC, regarding the elimination of tuberculosis. Specifically, the Council makes recommendations... technologies; and reviews the extent to which progress has been made toward eliminating tuberculosis. Matters...

  3. Development of the Facility for Transformation of Magnetic Characteristics of Weakly Magnetic Oxidized Iron Ores Related to Improvement of Technologies for Iron Ore Concentrate Production

    Directory of Open Access Journals (Sweden)

    Ponomarenko, O.M.

    2016-01-01

    Full Text Available New facility for continuous registration of iron ore magnetization depending on temperature by heating of iron ores upon reducing conditions was created. Facility allows to register the processes of transformation of weakly magnetic minerals into strongly magnetic ones under the influence of reducing agents and temperature, as well as to determine the Curie temperature of the minerals. Using created facility it was shown, that heating of goethite and hematite in the presence of 4 % of starch in the temperature range of 300—650 °С leads to significant increase of magnetization of the samples. X-Ray diffraction confirmed that under indicated conditions the structure of hematite and goethite is transformed into magnetite structure. Obtained results open up new possibilities for the development of effective technologies for oxidized iron ore beneficiation.

  4. Strengthening Africa's science granting councils as champions of ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Science granting councils are central to funding and catalyzing research and innovation, particularly in national science systems in sub-Saharan Africa. The availability of reliable indicators—to monitor Africa's scientific and technological developments, implement science policies and strategies, track public investment in ...

  5. 76 FR 54216 - Pacific Fishery Management Council (Council); Work Session To Review Proposed Salmon Methodology...

    Science.gov (United States)

    2011-08-31

    ... Fishery Management Council (Council); Work Session To Review Proposed Salmon Methodology Changes AGENCY.... ACTION: Notice of a public meeting. SUMMARY: The Pacific Fishery Management Council's Salmon Technical Team (STT), Scientific and Statistical Committee (SSC) Salmon Subcommittee, and Model Evaluation...

  6. Computer programs for capital cost estimation, lifetime economic performance simulation, and computation of cost indexes for laser fusion and other advanced technology facilities

    International Nuclear Information System (INIS)

    Pendergrass, J.H.

    1978-01-01

    Three FORTRAN programs, CAPITAL, VENTURE, and INDEXER, have been developed to automate computations used in assessing the economic viability of proposed or conceptual laser fusion and other advanced-technology facilities, as well as conventional projects. The types of calculations performed by these programs are, respectively, capital cost estimation, lifetime economic performance simulation, and computation of cost indexes. The codes permit these three topics to be addressed with considerable sophistication commensurate with user requirements and available data

  7. Organizational Culture and Its Relationship with the Organizational Climate in the Youth Higher Council from the Perspective of Council Staff

    Science.gov (United States)

    El-Majali, Basel Abdel Wahab

    2016-01-01

    In this article, the Higher Council of Youth in Jordan seeks to develop its services, to participate actively in King Abdullah II award for excellence and transparency, to promote the concepts of quality in all its activities and to take advantage of modern technology in the output of its programs and activities. This study considered as one of…

  8. 2011 Elections to Staff Council

    CERN Multimedia

    Staff Association

    2011-01-01

    Vote Elections to fill all seats in the Staff Council are being organized this month. Voting will begin on Monday 31 October. Make your voice heard and be many to elect the new Staff Council. By doing so, you will be encouraging the men and women who will  represent you over the next two years and they will doubtless appreciate your gratitude. More details on the elections can be found on the Staff Association web site. (http://association.web.cern.ch) Elections Timetable Monday 31 October, at noon start date for voting Monday 14 November, at noon closing date for voting Monday 21 November, publication of the results in Echo Tuesday 22 and Wednesday 29 November Staff Association Assizes Tuesday 6 December, at 10.00 a.m. first meeting of the new Staff Council and election of the new Executive Committee The voting procedure is monitored by the Election Committee. 

  9. Leveraging new information technology to monitor medicine use in 71 residential aged care facilities: variation in polypharmacy and antipsychotic use.

    Science.gov (United States)

    Pont, Lisa G; Raban, Magda Z; Jorgensen, Mikaela L; Georgiou, Andrew; Westbrook, Johanna I

    2018-06-08

    The aim of this study was to use routinely collected electronic medicines administration (eMAR) data in residential aged care (RAC) to investigate the quality use of medicines. A cross-sectional analysis of eMAR data. 71 RAC facilities in New South Wales and the Australian Capital Territory, Australia. Permanent residents living in a participating facility on 1 October 2015. None. Variation in polypharmacy (≥5 medications), hyper-polypharmacy (≥10 medications) and antipsychotic use across facilities was examined using funnel plot analysis. The study dataset included 4775 long-term residents. The mean resident age was 85.3 years and 70.6% of residents were female. The median facility size was 60 residents and 74.3% were in metropolitan locations. 84.3% of residents had polypharmacy, 41.2% hyper-polypharmacy and 21.0% were using an antipsychotic. The extent of polypharmacy (69.75-100% of residents), hyper-polypharmacy (38.81-76.19%) and use of antipsychotic medicines (0-75.6%) varied considerably across the 71 facilities. Using eMAR data we found substantial variation in polypharmacy, hyper-polypharmacy and antipsychotic medicine use across 71 RAC facilities. Further investigation into the policies and practices of facilities performing above or below expected levels is warranted to understand variation and drive quality improvement.

  10. Universal Drive Train Facility

    Data.gov (United States)

    Federal Laboratory Consortium — This vehicle drive train research facility is capable of evaluating helicopter and ground vehicle power transmission technologies in a system level environment. The...

  11. Guide to research facilities

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-01

    This Guide provides information on facilities at US Department of Energy (DOE) and other government laboratories that focus on research and development of energy efficiency and renewable energy technologies. These laboratories have opened these facilities to outside users within the scientific community to encourage cooperation between the laboratories and the private sector. The Guide features two types of facilities: designated user facilities and other research facilities. Designated user facilities are one-of-a-kind DOE facilities that are staffed by personnel with unparalleled expertise and that contain sophisticated equipment. Other research facilities are facilities at DOE and other government laboratories that provide sophisticated equipment, testing areas, or processes that may not be available at private facilities. Each facility listing includes the name and phone number of someone you can call for more information.

  12. Application of accident progression event tree technology to the Savannah River Site Defense Waste Processing Facility SAR analysis

    International Nuclear Information System (INIS)

    Brandyberry, M.D.; Baker, W.H.; Wittman, R.S.; Amos, C.N.

    1993-01-01

    The Accident Analysis in the Safety Analysis Report (SAR) for the Savannah River Site (SRS) Defense Waste Processing Facility (DWPF) has recently undergone an upgrade. Non-reactor SARs at SRS (and other Department of Energy (DOE) sites) use probabilistic techniques to assess the frequency of accidents at their facilities. This paper describes the application of an extension of the Accident Progression Event Tree (APET) approach to accidents at the SRS DWPF. The APET technique allows an integrated model of the facility risk to be developed, where previous probabilistic accident analyses have been limited to the quantification of the frequency and consequences of individual accident scenarios treated independently. Use of an APET allows a more structured approach, incorporating both the treatment of initiators that are common to more than one accident, and of accident progression at the facility

  13. Members of the State Council of Geneva

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    Luncheon hosted by the Director-General for members of the State Council of Geneva: From left to right A. Naudi; J. May; M. Carlo Lamprecht, State Council - Employement, Foreign Office and Economic Departement; M. Robert Hensler, State Chancellor; L. Maiani, CERN Director General; H.F. Hoffmann; M. Robert Cramer, State Council - Environment, Agriculture and Interior Departement; J.Van Der Boon; M. Laurent Moutinot, State Council - Installation, equipment and housing Departement; C. Détraz; C. Wyss; P. Jenni; G. Hentsch; M. Pierre-François Unger, State Council - Health and Social Action Departement; G. Stassinakis; M. Bourquin, CERN Council President.

  14. Fiscal councils and economic volatility

    Czech Academy of Sciences Publication Activity Database

    Geršl, A.; Jašová, M.; Zápal, Jan

    2014-01-01

    Roč. 64, č. 3 (2014), s. 190-212 ISSN 0015-1920 Grant - others:UK(CZ) UNCE 204005/2012 Institutional support: PRVOUK-P23 Keywords : dynamic inconsistency * fiscal and monetary policy interaction * independent fiscal council Subject RIV: AH - Economic s Impact factor: 0.420, year: 2014 http://journal.fsv.cuni.cz/storage/1298_jasova.pdf

  15. A busy week for Council

    CERN Multimedia

    2009-01-01

    This has been a busy week for the CERN Council, and there is much to report. Firstly, I’m pleased to say that Council approved the Organization’s Medium Term Plan, and with it the budget for financial year 2010. In a time of global recession, this is a strong vote of confidence from the Member States. This meeting of Council provided an opportunity for the working group on the scientific and geographical enlargement of CERN to set out a roadmap towards its final report, which is to be made at Council’s December session this year. One part of the process over the coming months is to bring the major players in particle physics from beyond the European region into the discussion, ensuring that the working group’s recommendations lead to an optimum position for CERN and European particle physics in the global context. An indicator of the continuing attractiveness of CERN is the fact that Council has received four new applications...

  16. Council celebrates CERN Control Centre

    CERN Multimedia

    2006-01-01

    With the unveiling of its new sign, the CERN Control Centre was officially inaugurated on Thursday 16 March. To celebrate its startup, CERN Council members visited the sleek centre, a futuristic-looking room filled with a multitude of monitoring screens.

  17. Evaluation of technologies for remediation of disposed radioactive and hazardous wastes in a facility at the Idaho National Engineering Laboratory

    International Nuclear Information System (INIS)

    Reno, H.W.; Martin, D.D.; Rasmussen, T.L.

    1989-01-01

    For the past twenty years the US Department of Energy has been investigating and evaluating technologies for the long term management of disposed transuranic contaminated wastes at the Radioactive Waste Management Complex of the Idaho National Engineering Laboratory. More than fifty technologies have been investigated and evaluated and three technologies have been selected for feasibility study demonstration at the complex. This paper discusses the evaluation of those technologies and describes the three technologies selected for demonstration. The paper further suggests that future actions under the Comprehensive Environmental Response, Compensation, and Liability Act should build from previous evaluations completed heretofore. 18 refs., 3 figs., 1 tab

  18. 77 FR 61466 - National Women's Business Council

    Science.gov (United States)

    2012-10-09

    ... SMALL BUSINESS ADMINISTRATION National Women's Business Council AGENCY: U.S. Small Business... Business Council (NWBC). The meeting will be open to the public. DATES: The meeting will be held on October... [[Page 61467

  19. National Council on Alcoholism and Drug Dependence

    Science.gov (United States)

    ... Month NCADD National Council on Alcoholism and Drug Dependence Addiction is a Disease - Treatment is Available - Recovery ... years, The National Council on Alcoholism and Drug Dependence, Inc. (NCADD) has been a valuable resource for ...

  20. Achievement report for fiscal 2000 on development of technology to evaluate reliability of petroleum refining facilities; 2000 nendo sekiyu seisei setsubi shinraisei hyoka nado gijutsu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    This paper reports the achievements in fiscal 2000 in development of a technology to evaluate reliability of petroleum refining facilities. The development efforts were made mainly on analyses by simulation and neural net (NN) that utilize computers. In the high-temperature system facilities, the creep damage generation is governed by different factors including impurities. The evaluation on joint life requires simultaneous use of low temperature zone long-time test. Verification was made on application of non-destructive inspection, such as use of ultrasonic waves in the accelerated creep zone. Defect detecting capability was identified when an ultrasonic wave flaw detection model is used for buried piping. In the pulse eddy current flaw detection, a coil most superb in totality was selected by means of simulation, by which corrosion and wall thickness of piping and devices were detected from outside the sheathing materials. Development was made on a technology to diagnose and evaluate corrosion of tank in operation by using the AE method. The remaining life of transformers is determined by how seriously the coil insulating paper has been deteriorated, and furfural in the oil was found effective for the parameters. Particularly, application of the NN was revealed to be effective in estimating electric motor deterioration. A high-temperature sulfide corrosion rate estimating model was developed from the operation and measurement data of the facilities by applying the NN and TCBM. (NEDO)

  1. FINESSE: study of the issues, experiments and facilities for fusion nuclear technology research and development. Interim report. Volume IV

    International Nuclear Information System (INIS)

    Abdou, M.

    1984-10-01

    This volume contains the following chapters (1) neutronics tests, (2) fluence considerations, (3) instrumentation and test matrix, (4) non-neutron test stands, (5) accelerator-based point neutron sources, (6) utilization of fission reactors, (7) tandem mirror test facilities, (8) tokamak fusion test facilities, (9) reliability development testing impacts on fusion reactor availability, and (10) fusion development scenarios. In addition, the following appendices are included: (1) evaluation of experience from fast breeder reactors, (2) observations of experts from the fission field, (3) evaluation of experience from the aerospace industry, (4) characterization of fusion nuclear systems operating environment, (5) modelling of MFTF-α+T high gamma mode performance, and (6) small-scale, multiple effects testing at US/DOE breeder reactor in-pile facilities

  2. Operation technology of the ventilation system of the radioactive waste treatment facility(II) - Design and operation note

    Energy Technology Data Exchange (ETDEWEB)

    Lee, K. M.; Lee, B. C.; Bae, S. M. [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-12-01

    As the radioactive waste treatment work, such as compaction and/or solidification of wastes, are done directly by the workers in the Radioactive Waste Treatment Facility, the reasonable design and operation of the ventilation system is essential. In this report, the design criteria and specification of the ventilation equipment, system operation method are described for the effective design and operation of ventilation system in the radioactive waste treatment facility. And the anti-vibration work which was done in the Radioactive Waste Treatment Facility in KAERI to reduce the effect of vibration due to the continuous operation of big rotational equipment, the intake fans and the exhaust fans, are described in the report. 11 refs., 10 figs., 12 tabs. (Author)

  3. The utility of a geographic information system in facility/land use-related opportunities and constraints analysis for the Rocky Flats Environmental Technology Site

    International Nuclear Information System (INIS)

    Stewart, J.

    1994-01-01

    Facility/land use-related opportunities and constraints analysis, which is indispensable for the evaluation of potential future uses for a site, is essentially spatial in nature. Spatial analysis is best accomplished using a geographic information system (GIS), as a GIS allows the identification and reporting or mapping of complex relationships among multiple data layers such as geology, soils, vegetation, contamination, and facilities. GIS-based maps and reports are valuable tools for communicating facility/land use-related opportunities and constraints to decision makers. This paper defines the term open-quotes GIS,close quotes, provides an example of how a GIS could be used to conduct opportunities and constraints analysis at the Rocky Flats Environmental Technology Site (RFETS), and summarizes the benefits of using a GIS for this analysis. Because a GIS is often seen as a open-quotes black boxclose quotes shrouded in technical jargon, this paper attempts to describe the concepts and benefits of a GIS in language understandable to decision makers who are not GIS experts but who migth profit from the use of GIS products. The purpose of this paper is to alert DOE decision makers to a valuable source of facility/land use-related information that already exists at many sites and that should not be overlook during the analysis of future use options

  4. 76 FR 62133 - National Women's Business Council

    Science.gov (United States)

    2011-10-06

    ... SMALL BUSINESS ADMINISTRATION National Women's Business Council AGENCY: U.S. Small Business... Business Council (NWBC). The meeting will be open to the public. DATES: The meeting will be held on Monday...., Appendix 2), SBA announces the meeting of the National Women's Business Council. The National Women's...

  5. Governor's Council on Disabilities and Special Education

    Science.gov (United States)

    State Employees Governor's Council on Disabilities and Special Education DHSS State of Alaska Home ; Governor's Council on Disabilities and Special Education Page Content Untitled Document Patrick Reinhart : follow GCDSE to 40404 The Governor's Council on Disabilities & Special Education is pleased to award

  6. 78 FR 15928 - Forestry Research Advisory Council

    Science.gov (United States)

    2013-03-13

    ... apportionment of funds. Advisory Council Organization The Council will be comprised of not more than 20 members. The members appointed to the Council will be fairly balanced in terms of the points of view... relevancy to a membership category. Geographic balance and a balanced distribution among the categories are...

  7. Parent-School Councils in Beijing, China

    Science.gov (United States)

    Lewis, Wayne D.; Bjork, Lars G.; Zhao, Yuru; Chi, Bin

    2011-01-01

    This exploratory study examines how schools in Beijing have responded to a Chinese national policy mandate to establish and maintain parent councils. We surveyed principals and parent council members across schools in the Beijing municipality about the establishment and functions of their schools' parent councils. Survey results provide insights…

  8. 36 CFR 801.4 - Council comments.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Council comments. 801.4 Section 801.4 Parks, Forests, and Public Property ADVISORY COUNCIL ON HISTORIC PRESERVATION HISTORIC PRESERVATION REQUIREMENTS OF THE URBAN DEVELOPMENT ACTION GRANT PROGRAM § 801.4 Council comments. The following...

  9. 75 FR 20832 - National Coal Council

    Science.gov (United States)

    2010-04-21

    ... DEPARTMENT OF ENERGY National Coal Council AGENCY: Department of Energy. ACTION: Notice of open meeting. SUMMARY: This notice announces a meeting of the National Coal Council (NCC). The Federal Advisory... Biomass/Coal Blending to Generate Electricity Council Business: [cir] Finance Report by Committee Chairman...

  10. 76 FR 74049 - National Coal Council

    Science.gov (United States)

    2011-11-30

    ... DEPARTMENT OF ENERGY National Coal Council AGENCY: Office of Fossil Energy, Department of Energy..., notice is hereby given that the National Coal Council will be renewed for a two-year period beginning... general policy matters relating to coal issues. Additionally, the renewal of the Council has been...

  11. 78 FR 7424 - National Coal Council

    Science.gov (United States)

    2013-02-01

    ... DEPARTMENT OF ENERGY National Coal Council AGENCY: Department of Energy. ACTION: Notice of open meeting. SUMMARY: This notice announces a meeting of the National Coal Council (NCC). The Federal Advisory... 2013 meeting of the National Coal Council. Agenda: 1. Opening Remarks by NCC Chairman John Eaves 2...

  12. 78 FR 71592 - National Coal Council

    Science.gov (United States)

    2013-11-29

    ... DEPARTMENT OF ENERGY National Coal Council AGENCY: Department of Energy, Office of Fossil Energy..., notice is hereby given that the National Coal Council (NCC) will be renewed for a two-year period. The... matters relating to coal issues. Additionally, the renewal of the National Coal Council has been...

  13. 78 FR 23242 - National Coal Council

    Science.gov (United States)

    2013-04-18

    ... DEPARTMENT OF ENERGY National Coal Council AGENCY: Department of Energy. ACTION: Notice of open meetings. SUMMARY: This notice announces two meetings of the National Coal Council (NCC). The Federal...: Agenda for Thursday, May 16, 2013 1. Call to Order by John Eaves, Chairman, National Coal Council 2...

  14. 78 FR 40131 - National Petroleum Council

    Science.gov (United States)

    2013-07-03

    ... DEPARTMENT OF ENERGY National Petroleum Council AGENCY: Office of Fossil Energy, Department of... Petroleum Council. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public... Administrative Matters Discussion of Any Other Business Properly Brought Before the National Petroleum Council...

  15. 77 FR 42297 - National Petroleum Council

    Science.gov (United States)

    2012-07-18

    ... DEPARTMENT OF ENERGY National Petroleum Council AGENCY: Department of Energy, Office of Fossil... National Petroleum Council. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that... Matters Discussion of Any Other Business Properly Brought Before the National Petroleum Council...

  16. 76 FR 53889 - National Petroleum Council

    Science.gov (United States)

    2011-08-30

    ... DEPARTMENT OF ENERGY National Petroleum Council AGENCY: Department of Energy, Office of Fossil... Petroleum Council. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public... Properly Brought Before the National, Petroleum Council, Adjournment. Public Participation: The meeting is...

  17. 76 FR 37064 - Gulf of Mexico Fishery Management Council (Council); Public Meeting

    Science.gov (United States)

    2011-06-24

    ... meeting. SUMMARY: The Gulf of Mexico Fishery Management Council will convene a public meeting via webinar... meeting will be held via webinar. Council address: Gulf of Mexico Fishery Management Council, 2203 North... Executive Director, Gulf of Mexico Fishery Management Council; telephone: (813) 348-1630. SUPPLEMENTARY...

  18. 75 FR 31418 - Intermountain Region, Payette National Forest, Council Ranger District; Idaho; Mill Creek-Council...

    Science.gov (United States)

    2010-06-03

    ... Ranger District; Idaho; Mill Creek--Council Mountain Landscape Restoration Project AGENCY: Forest Service... the Mill Creek--Council Mountain Landscape Restoration Project. The approximate 51,900 acre project area is located about two miles east of Council, Idaho. The Mill Creek--Council Mountain Landscape...

  19. Advanced technologies for maintenance of electrical systems and equipment at the Savannah River Site Defense Waste Processing Facility

    International Nuclear Information System (INIS)

    Husler, R.O.; Weir, T.J.

    1991-01-01

    An enhanced maintenance program is being established to characterize and monitor cables, components, and process response at the Savannah River Site, Defense Waste Processing Facility. This facility was designed and constructed to immobilize the radioactive waste currently stored in underground storage tanks and is expected to begin operation in 1993. The plant is initiating the program to baseline and monitor instrument and control (I ampersand C) and electrical equipment, remote process equipment, embedded instrument and control cables, and in-cell jumper cables used in the facility. This program is based on the electronic characterization and diagnostic (ECAD) system which was modified to include process response analysis and to meet rigid Department of Energy equipment requirements. The system consists of computer-automated, state-of-the-art electronics. The data that are gathered are stored in a computerized database for analysis, trending, and troubleshooting. It is anticipated that the data which are gathered and trended will aid in life extension for the facility

  20. 78 FR 64200 - Caribbean Fishery Management Council; Public Meetings

    Science.gov (United States)

    2013-10-28

    ... Caribbean Fishery Management Council's (Council) Scientific and Statistical Committee (SSC) will hold... Fishery Management Council; Public Meetings AGENCY: National Marine Fisheries Service (NMFS), National... held at the Caribbean Fishery Management Council Headquarters, located at 270 Mu[ntilde]oz Rivera...