Development of Power Assisting Suit

Science.gov (United States)

Yamamoto, Keijiro; Ishii, Mineo; Hyodo, Kazuhito; Yoshimitsu, Toshihiro; Matsuo, Takashi

In order to realize a wearable power assisting suit for assisting a nurse to carry a patient in her arms, the power supply and control systems of the suit have to be miniaturized, and it has to be wireless and pipeline-less. The new wearable suit consists of shoulders, arms, back, waist and legs units to be fitted on the nurse's body. The arms, waist and legs have new pneumatic rotary actuators driven directly by micro air pumps supplied by portable Ni-Cd batteries. The muscle forces are sensed by a new muscle hardness sensor utilizing a sensing tip mounted on a force sensing film device. An embedded microcomputer is used for the calculations of control signals. The new wearable suit was applied practically to a human body and a series of movement experiments that weights in the arms were held and taken up and down was performed. Each unit of the suit could transmit assisting torque directly to each joint verifying its practicability.

Vibrotactile perception assessment for a haptic interface on an antigravity suit.

Science.gov (United States)

Ko, Sang Min; Lee, Kwangil; Kim, Daeho; Ji, Yong Gu

2017-01-01

Haptic technology is used in various fields to transmit information to the user with or without visual and auditory cues. This study aimed to provide preliminary data for use in developing a haptic interface for an antigravity (anti-G) suit. With the structural characteristics of the anti-G suit in mind, we determined five areas on the body (lower back, outer thighs, inner thighs, outer calves, and inner calves) on which to install ten bar-type eccentric rotating mass (ERM) motors as vibration actuators. To determine the design factors of the haptic anti-G suit, we conducted three experiments to find the absolute threshold, moderate intensity, and subjective assessments of vibrotactile stimuli. Twenty-six fighter pilots participated in the experiments, which were conducted in a fixed-based flight simulator. From the results of our study, we recommend 1) absolute thresholds of ∼11.98-15.84 Hz and 102.01-104.06 dB, 2) moderate intensities of 74.36 Hz and 126.98 dB for the lower back and 58.65 Hz and 122.37 dB for either side of the thighs and calves, and 3) subjective assessments of vibrotactile stimuli (displeasure, easy to perceive, and level of comfort). The results of this study will be useful for the design of a haptic anti-G suit. Copyright © 2016 Elsevier Ltd. All rights reserved.

Experiences from Real-World Deployment of Context-Aware Technologies in a Hospital Environment

DEFF Research Database (Denmark)

Bardram, Jakob Eyvind; Hansen, Thomas Riisgaard; Mogensen, Martin

2006-01-01

and discuss our experiences from an ongoing deployment of a suite of context-aware technologies and applications in a hospital environment, including a context-awareness infrastructure, a location tracking system, and two context-aware applications running on interactive wall displays and mobile phones. Based......Context-aware computing is a central concept in ubiquitous computing and many suggestions for context-aware technologies and applications have been proposed. There is, however, little evidence on how these concepts and technologies play out in a real-world setting. In this paper we describe...... on an analysis of the use of these systems, we observe that many of the ideas behind context-aware computing are valid, and that the context-aware applications are useful for clinicians in their work. By reflecting on the nature of the designed context-aware technologies, we present a model which states...

Advanced Sensor Platform to Evaluate Manloads For Exploration Suit Architectures

Science.gov (United States)

McFarland, Shane; Pierce, Gregory

2016-01-01

Space suit manloads are defined as the outer bounds of force that the human occupant of a suit is able to exert onto the suit during motion. They are defined on a suit-component basis as a unit of maximum force that the suit component in question must withstand without failure. Existing legacy manloads requirements are specific to the suit architecture of the EMU and were developed in an iterative fashion; however, future exploration needs dictate a new suit architecture with bearings, load paths, and entry capability not previously used in any flight suit. No capability currently exists to easily evaluate manloads imparted by a suited occupant, which would be required to develop requirements for a flight-rated design. However, sensor technology has now progressed to the point where an easily-deployable, repeatable and flexible manloads measuring technique could be developed leveraging recent advances in sensor technology. INNOVATION: This development positively impacts schedule, cost and safety risk associated with new suit exploration architectures. For a final flight design, a comprehensive and accurate man loads requirements set must be communicated to the contractor; failing that, a suit design which does not meet necessary manloads limits is prone to failure during testing or worse, during an EVA, which could cause catastrophic failure of the pressure garment posing risk to the crew. This work facilitates a viable means of developing manloads requirements using a range of human sizes & strengths. OUTCOME / RESULTS: Performed sensor market research. Highlighted three viable options (primary, secondary, and flexible packaging option). Designed/fabricated custom bracket to evaluate primary option on a single suit axial. Manned suited manload testing completed and general approach verified.

Leveraging Active Knit Technologies for Aerospace Pressure Suit Applications

Data.gov (United States)

National Aeronautics and Space Administration — Anti-Gravity Suits (AGS) are garments used in astronautics to prevent crew from experiencing orthostatic intolerance (OI) and consequential blackouts while...

Advanced Gas Sensing Technology for Space Suits, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Advanced space suits require lightweight, low-power, durable sensors for monitoring critical life support materials. No current compact sensors have the tolerance...

Development on smart suit for dairy work assistance.

Science.gov (United States)

Nara, Hiroyuki; Kusaka, Takashi; Tanaka, Takayuki; Yamagishi, Takayuki; Ogura, Shotaroh

2013-01-01

Our purpose in this study is to achieve an independent life and a social involvement for the elderly using KEIROKA Technology(fatigue-reduction) which makes it possible to improve the quality of chores and occupations by removing excessive strain and tiredness. The authors have developed power assist suits named "smart suit". The authors have evaluated the effect that the purpose of dairy work assistance, to measure EMG of the worker, compared to the potential of the surface of the non-wearing and wearing "smart suit".

EUROPattern Suite technology for computer-aided immunofluorescence microscopy in autoantibody diagnostics.

Science.gov (United States)

Krause, C; Ens, K; Fechner, K; Voigt, J; Fraune, J; Rohwäder, E; Hahn, M; Danckwardt, M; Feirer, C; Barth, E; Martinetz, T; Stöcker, W

2015-04-01

Antinuclear autoantibodies (ANA) are highly informative biomarkers in autoimmune diagnostics. The increasing demand for effective test systems, however, has led to the development of a confusingly large variety of different platforms. One of them, the indirect immunofluorescence (IIF), is regarded as the common gold standard for ANA screening, as described in a position statement by the American College of Rheumatology in 2009. Technological solutions have been developed aimed at standardization and automation of IIF to overcome methodological limitations and subjective bias in IIF interpretation. In this review, we present the EUROPattern Suite, a system for computer-aided immunofluorescence microscopy (CAIFM) including automated acquisition of digital images and evaluation of IIF results. The system was originally designed for ANA diagnostics on human epithelial cells, but its applications have been extended with the latest system update version 1.5 to the analysis of antineutrophil cytoplasmic antibodies (ANCA) and anti-dsDNA antibodies. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Touring the Tomato: A Suite of Chemistry Laboratory Experiments

Science.gov (United States)

Sarkar, Sayantani; Chatterjee, Subhasish; Medina, Nancy; Stark, Ruth E.

2013-01-01

An eight-session interdisciplinary laboratory curriculum has been designed using a suite of analytical chemistry techniques to study biomaterials derived from an inexpensive source such as the tomato fruit. A logical

Medical technology integration: CT, angiography, imaging-capable OR-table, navigation and robotics in a multifunctional sterile suite.

Science.gov (United States)

Jacob, A L; Regazzoni, P; Bilecen, D; Rasmus, M; Huegli, R W; Messmer, P

2007-01-01

Technology integration is an enabling technological prerequisite to achieve a major breakthrough in sophisticated intra-operative imaging, navigation and robotics in minimally invasive and/or emergency diagnosis and therapy. Without a high degree of integration and reliability comparable to that achieved in the aircraft industry image guidance in its different facets will not ultimately succeed. As of today technology integration in the field of image-guidance is close to nonexistent. Technology integration requires inter-departmental integration of human and financial resources and of medical processes in a dialectic way. This expanded techno-socio-economic integration has profound consequences for the administration and working conditions in hospitals. At the university hospital of Basel, Switzerland, a multimodality multifunction sterile suite was put into operation after a substantial pre-run. We report the lessons learned during our venture into the world of medical technology integration and describe new possibilities for similar integration projects in the future.

Oracle SOA Suite 11g performance cookbook

CERN Document Server

Brasier, Matthew; Wright, Nicholas

2013-01-01

This is a Cookbook with interesting, hands-on recipes, giving detailed descriptions and lots of practical walkthroughs for boosting the performance of your Oracle SOA Suite.This book is for Oracle SOA Suite 11g administrators, developers, and architects who want to understand how they can maximise the performance of their SOA Suite infrastructure. The recipes contain easy to follow step-by-step instructions and include many helpful and practical tips. It is suitable for anyone with basic operating system and application server administration experience.

Miniature Flexible Humidity Sensitive Patches for Space Suits, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Advanced space suit technologies demand improved, simplified, long-life regenerative sensing technologies, including humidity sensors, that exceed the performance of...

Planetary Suit Hip Bearing Model for Predicting Design vs. Performance

Science.gov (United States)

Cowley, Matthew S.; Margerum, Sarah; Harvil, Lauren; Rajulu, Sudhakar

2011-01-01

Designing a planetary suit is very complex and often requires difficult trade-offs between performance, cost, mass, and system complexity. In order to verifying that new suit designs meet requirements, full prototypes must eventually be built and tested with human subjects. Using computer models early in the design phase of new hardware development can be advantageous, allowing virtual prototyping to take place. Having easily modifiable models of the suit hard sections may reduce the time it takes to make changes to the hardware designs and then to understand their impact on suit and human performance. A virtual design environment gives designers the ability to think outside the box and exhaust design possibilities before building and testing physical prototypes with human subjects. Reductions in prototyping and testing may eventually reduce development costs. This study is an attempt to develop computer models of the hard components of the suit with known physical characteristics, supplemented with human subject performance data. Objectives: The primary objective was to develop an articulating solid model of the Mark III hip bearings to be used for evaluating suit design performance of the hip joint. Methods: Solid models of a planetary prototype (Mark III) suit s hip bearings and brief section were reverse-engineered from the prototype. The performance of the models was then compared by evaluating the mobility performance differences between the nominal hardware configuration and hardware modifications. This was accomplished by gathering data from specific suited tasks. Subjects performed maximum flexion and abduction tasks while in a nominal suit bearing configuration and in three off-nominal configurations. Performance data for the hip were recorded using state-of-the-art motion capture technology. Results: The results demonstrate that solid models of planetary suit hard segments for use as a performance design tool is feasible. From a general trend perspective

Extending the GI Brokering Suite to Support New Interoperability Specifications

Science.gov (United States)

Boldrini, E.; Papeschi, F.; Santoro, M.; Nativi, S.

2014-12-01

The GI brokering suite provides the discovery, access, and semantic Brokers (i.e. GI-cat, GI-axe, GI-sem) that empower a Brokering framework for multi-disciplinary and multi-organizational interoperability. GI suite has been successfully deployed in the framework of several programmes and initiatives, such as European Union funded projects, NSF BCube, and the intergovernmental coordinated effort Global Earth Observation System of Systems (GEOSS). Each GI suite Broker facilitates interoperability for a particular functionality (i.e. discovery, access, semantic extension) among a set of brokered resources published by autonomous providers (e.g. data repositories, web services, semantic assets) and a set of heterogeneous consumers (e.g. client applications, portals, apps). A wide set of data models, encoding formats, and service protocols are already supported by the GI suite, such as the ones defined by international standardizing organizations like OGC and ISO (e.g. WxS, CSW, SWE, GML, netCDF) and by Community specifications (e.g. THREDDS, OpenSearch, OPeNDAP, ESRI APIs). Using GI suite, resources published by a particular Community or organization through their specific technology (e.g. OPeNDAP/netCDF) can be transparently discovered, accessed, and used by different Communities utilizing their preferred tools (e.g. a GIS visualizing WMS layers). Since Information Technology is a moving target, new standards and technologies continuously emerge and are adopted in the Earth Science context too. Therefore, GI Brokering suite was conceived to be flexible and accommodate new interoperability protocols and data models. For example, GI suite has recently added support to well-used specifications, introduced to implement Linked data, Semantic Web and precise community needs. Amongst the others, they included: DCAT: a RDF vocabulary designed to facilitate interoperability between Web data catalogs. CKAN: a data management system for data distribution, particularly used by

Advanced EVA Suit Camera System Development Project

Science.gov (United States)

Mock, Kyla

2016-01-01

The National Aeronautics and Space Administration (NASA) at the Johnson Space Center (JSC) is developing a new extra-vehicular activity (EVA) suit known as the Advanced EVA Z2 Suit. All of the improvements to the EVA Suit provide the opportunity to update the technology of the video imagery. My summer internship project involved improving the video streaming capabilities of the cameras that will be used on the Z2 Suit for data acquisition. To accomplish this, I familiarized myself with the architecture of the camera that is currently being tested to be able to make improvements on the design. Because there is a lot of benefit to saving space, power, and weight on the EVA suit, my job was to use Altium Design to start designing a much smaller and simplified interface board for the camera's microprocessor and external components. This involved checking datasheets of various components and checking signal connections to ensure that this architecture could be used for both the Z2 suit and potentially other future projects. The Orion spacecraft is a specific project that may benefit from this condensed camera interface design. The camera's physical placement on the suit also needed to be determined and tested so that image resolution can be maximized. Many of the options of the camera placement may be tested along with other future suit testing. There are multiple teams that work on different parts of the suit, so the camera's placement could directly affect their research or design. For this reason, a big part of my project was initiating contact with other branches and setting up multiple meetings to learn more about the pros and cons of the potential camera placements we are analyzing. Collaboration with the multiple teams working on the Advanced EVA Z2 Suit is absolutely necessary and these comparisons will be used as further progress is made for the overall suit design. This prototype will not be finished in time for the scheduled Z2 Suit testing, so my time was

The BTeV Software Tutorial Suite

International Nuclear Information System (INIS)

Kutschke, Robert K.

2004-01-01

The BTeV Collaboration is starting to develop its C++ based offline software suite, an integral part of which is a series of tutorials. These tutorials are targeted at a diverse audience, including new graduate students, experienced physicists with little or no C++ experience, those with just enough C++ to be dangerous, and experts who need only an overview of the available tools. The tutorials must both teach C++ in general and the BTeV specific tools in particular. Finally, they must teach physicists how to find and use the detailed documentation. This report will review the status of the BTeV experiment, give an overview of the plans for and the state of the software and will then describe the plans for the tutorial suite

SUIT

DEFF Research Database (Denmark)

Algreen-Ussing, Gregers; Wedebrunn, Ola

2003-01-01

Leaflet om project SUIT udgivet af European Commission. Tryksagen forklarer i korte ord resultatet af projektet SUIT. Kulturværdier i Miljøspørgsmål. Vurdering af projekter og indvirkning på miljø....

Monitoring Human Performance During Suited Operations: A Technology Feasibility Study Using EMU Gloves

Science.gov (United States)

Bekdash, Omar; Norcross, Jason; McFarland, Shane

2015-01-01

Mobility tracking of human subjects while conducting suited operations still remains focused on the external movement of the suit and little is known about the human movement within it. For this study, accelerometers and bend sensitive resistors were integrated into a custom carrier glove to quantify range of motion and dexterity from within the pressurized glove environment as a first stage feasibility study of sensor hardware, integration, and reporting capabilities. Sensors were also placed on the exterior of the pressurized glove to determine if it was possible to compare a glove joint angle to the anatomical joint angle of the subject during tasks. Quantifying human movement within the suit was feasible, with accelerometers clearly detecting movements in the wrist and reporting expected joint angles at maximum flexion or extension postures with repeatability of plus or minus 5 degrees between trials. Bend sensors placed on the proximal interphalangeal and distal interphalangeal joints performed less well. It was not possible to accurately determine the actual joint angle using these bend sensors, but these sensors could be used to determine when the joint was flexed to its maximum and provide a general range of mobility needed to complete a task. Further work includes additional testing with accelerometers and the possible inclusion of hardware such as magnetometers or gyroscopes to more precisely locate the joint in 3D space. We hope to eventually expand beyond the hand and glove and develop a more comprehensive suit sensor suite to characterize motion across more joints (knee, elbow, shoulder, etc.) and fully monitor the human body operating within the suit environment.

Ventilation Transport Trade Study for Future Space Suit Life Support Systems

Science.gov (United States)

Kempf, Robert; Vogel, Matthew; Paul, Heather L.

2008-01-01

A new and advanced portable life support system (PLSS) for space suit surface exploration will require a durable, compact, and energy efficient system to transport the ventilation stream through the space suit. Current space suits used by NASA circulate the ventilation stream via a ball-bearing supported centrifugal fan. As NASA enters the design phase for the next generation PLSS, it is necessary to evaluate available technologies to determine what improvements can be made in mass, volume, power, and reliability for a ventilation transport system. Several air movement devices already designed for commercial, military, and space applications are optimized in these areas and could be adapted for EVA use. This paper summarizes the efforts to identify and compare the latest fan and bearing technologies to determine candidates for the next generation PLSS.

EVA Physiology and Medical Considerations Working in the Suit

Science.gov (United States)

Parazynski, Scott

2012-01-01

This "EVA Physiology and Medical Considerations Working in the Suit" presentation covers several topics related to the medical implications and physiological effects of suited operations in space from the perspective of a physician with considerable first-hand Extravehicular Activity (EVA) experience. Key themes include EVA physiology working in a pressure suit in the vacuum of space, basic EVA life support and work support, Thermal Protection System (TPS) inspections and repairs, and discussions of the physical challenges of an EVA. Parazynski covers the common injuries and significant risks during EVAs, as well as physical training required to prepare for EVAs. He also shares overall suit physiological and medical knowledge with the next generation of Extravehicular Mobility Unit (EMU) system designers.

On-orbit technology experiment facility definition

Science.gov (United States)

Russell, Richard A.; Buchan, Robert W.; Gates, Richard M.

1988-01-01

A study was conducted to identify on-orbit integrated facility needs to support in-space technology experiments on the Space Station and associated free flyers. In particular, the first task was to examine the proposed technology development missions (TDMX's) from the model mission set and other proposed experimental facilities, both individually and by theme, to determine how and if the experiments might be combined, what equipment might be shared, what equipment might be used as generic equipment for continued experimentation, and what experiments will conflict with the conduct of other experiments or Space Station operations. Then using these results, to determine on-orbit facility needs to optimize the implementation of technology payloads. Finally, to develop one or more scenarios, design concepts, and outfitting requirements for implementation of onboard technology experiments.

The ZPIC educational code suite

Science.gov (United States)

Calado, R.; Pardal, M.; Ninhos, P.; Helm, A.; Mori, W. B.; Decyk, V. K.; Vieira, J.; Silva, L. O.; Fonseca, R. A.

2017-10-01

Particle-in-Cell (PIC) codes are used in almost all areas of plasma physics, such as fusion energy research, plasma accelerators, space physics, ion propulsion, and plasma processing, and many other areas. In this work, we present the ZPIC educational code suite, a new initiative to foster training in plasma physics using computer simulations. Leveraging on our expertise and experience from the development and use of the OSIRIS PIC code, we have developed a suite of 1D/2D fully relativistic electromagnetic PIC codes, as well as 1D electrostatic. These codes are self-contained and require only a standard laptop/desktop computer with a C compiler to be run. The output files are written in a new file format called ZDF that can be easily read using the supplied routines in a number of languages, such as Python, and IDL. The code suite also includes a number of example problems that can be used to illustrate several textbook and advanced plasma mechanisms, including instructions for parameter space exploration. We also invite contributions to this repository of test problems that will be made freely available to the community provided the input files comply with the format defined by the ZPIC team. The code suite is freely available and hosted on GitHub at https://github.com/zambzamb/zpic. Work partially supported by PICKSC.

Surgical Space Suits Increase Particle and Microbiological Emission Rates in a Simulated Surgical Environment.

Science.gov (United States)

Vijaysegaran, Praveen; Knibbs, Luke D; Morawska, Lidia; Crawford, Ross W

2018-05-01

The role of space suits in the prevention of orthopedic prosthetic joint infection remains unclear. Recent evidence suggests that space suits may in fact contribute to increased infection rates, with bioaerosol emissions from space suits identified as a potential cause. This study aimed to compare the particle and microbiological emission rates (PER and MER) of space suits and standard surgical clothing. A comparison of emission rates between space suits and standard surgical clothing was performed in a simulated surgical environment during 5 separate experiments. Particle counts were analyzed with 2 separate particle counters capable of detecting particles between 0.1 and 20 μm. An Andersen impactor was used to sample bacteria, with culture counts performed at 24 and 48 hours. Four experiments consistently showed statistically significant increases in both PER and MER when space suits are used compared with standard surgical clothing. One experiment showed inconsistent results, with a trend toward increases in both PER and MER when space suits are used compared with standard surgical clothing. Space suits cause increased PER and MER compared with standard surgical clothing. This finding provides mechanistic evidence to support the increased prosthetic joint infection rates observed in clinical studies. Copyright © 2017 Elsevier Inc. All rights reserved.

Use MACES IVA Suit for EVA Mobility Evaluations

Science.gov (United States)

Watson, Richard D.

2014-01-01

The use of an Intra-Vehicular Activity (IVA) suit for a spacewalk or Extra-Vehicular Activity (EVA) was evaluated for mobility and usability in the Neutral Buoyancy Lab (NBL) environment. The Space Shuttle Advanced Crew Escape Suit (ACES) has been modified (MACES) to integrate with the Orion spacecraft. The first several missions of the Orion MPCV spacecraft will not have mass available to carry an EVA specific suit so any EVA required will have to be performed by the MACES. Since the MACES was not designed with EVA in mind, it was unknown what mobility the suit would be able to provide for an EVA or if a person could perform useful tasks for an extended time inside the pressurized suit. The suit was evaluated in multiple NBL runs by a variety of subjects including crewmembers with significant EVA experience. Various functional mobility tasks performed included: translation, body positioning, carrying tools, body stabilization, equipment handling, and use of tools. Hardware configurations included with and without TMG, suit with IVA gloves and suit with EVA gloves. Most tasks were completed on ISS mockups with existing EVA tools. Some limited tasks were completed with prototype tools on a simulated rocky surface. Major findings include: demonstration of the ability to weigh-out the suit, understanding the need to have subjects perform multiple runs prior to getting feedback, determination of critical sizing factors, and need for adjustment of suit work envelop. The early testing has demonstrated the feasibility of EVA's limited duration and limited scope. Further testing is required with more flight like tasking and constraints to validate these early results. If the suit is used for EVA, it will require mission specific modifications for umbilical management or PLSS integration, safety tether attachment, and tool interfaces. These evaluations are continuing through calendar year 2014.

Integrated Suit Test 1 - A Study to Evaluate Effects of Suit Weight, Pressure, and Kinematics on Human Performance during Lunar Ambulation

Science.gov (United States)

Gernhardt, Michael L.; Norcross, Jason; Vos, Jessica R.

2008-01-01

In an effort to design the next generation Lunar suit, NASA has initiated a series of tests aimed at understanding the human physiological and biomechanical affects of space suits under a variety of conditions. The first of these tests was the EVA Walkback Test (ICES 2007-01-3133). NASA-JSC assembled a multi-disciplinary team to conduct the second test of the series, titled Integrated Suit Test 1 (IST-1), from March 6 through July 24, 2007. Similar to the Walkback Test, this study was performed with the Mark III (MKIII) EVA Technology Demonstrator suit, a treadmill, and the Partial Gravity Simulator in the Space Vehicle Mock-Up Facility at Johnson Space Center. The data collected for IST-1 included metabolic rates, ground reaction forces, biomechanics, and subjective workload and controllability feedback on both suited and unsuited (shirt-sleeve) astronaut subjects. For IST-1 the center of gravity was controlled to a nearly perfect position while the weight, pressure and biomechanics (waist locked vs. unlocked) were varied individually to evaluate the effects of each on the ability to perform level (0 degree incline) ambulation in simulated Lunar gravity. The detailed test methodology and preliminary key findings of IST-1 are summarized in this report.

A Secure Communication Suite for Underwater Acoustic Sensor Networks

Directory of Open Access Journals (Sweden)

Angelica Lo Duca

2012-11-01

Full Text Available In this paper we describe a security suite for Underwater Acoustic Sensor Networks comprising both fixed and mobile nodes. The security suite is composed of a secure routing protocol and a set of cryptographic primitives aimed at protecting the confidentiality and the integrity of underwater communication while taking into account the unique characteristics and constraints of the acoustic channel. By means of experiments and simulations based on real data, we show that the suite is suitable for an underwater networking environment as it introduces limited, and sometimes negligible, communication and power consumption overhead.

Interoperative efficiency in minimally invasive surgery suites.

Science.gov (United States)

van Det, M J; Meijerink, W J H J; Hoff, C; Pierie, J P E N

2009-10-01

Performing minimally invasive surgery (MIS) in a conventional operating room (OR) requires additional specialized equipment otherwise stored outside the OR. Before the procedure, the OR team must collect, prepare, and connect the equipment, then take it away afterward. These extra tasks pose a thread to OR efficiency and may lengthen turnover times. The dedicated MIS suite has permanently installed laparoscopic equipment that is operational on demand. This study presents two experiments that quantify the superior efficiency of the MIS suite in the interoperative period. Preoperative setup and postoperative breakdown times in the conventional OR and the MIS suite in an experimental setting and in daily practice were analyzed. In the experimental setting, randomly chosen OR teams simulated the setup and breakdown for a standard laparoscopic cholecystectomy (LC) and a complex laparoscopic sigmoid resection (LS). In the clinical setting, the interoperative period for 66 LCs randomly assigned to the conventional OR or the MIS suite were analyzed. In the experimental setting, the setup and breakdown times were significantly shorter in the MIS suite. The difference between the two types of OR increased for the complex procedure: 2:41 min for the LC (p < 0.001) and 10:47 min for the LS (p < 0.001). In the clinical setting, the setup and breakdown times as a whole were not reduced in the MIS suite. Laparoscopic setup and breakdown times were significantly shorter in the MIS suite (mean difference, 5:39 min; p < 0.001). Efficiency during the interoperative period is significantly improved in the MIS suite. The OR nurses' tasks are relieved, which may reduce mental and physical workload and improve job satisfaction and patient safety. Due to simultaneous tasks of other disciplines, an overall turnover time reduction could not be achieved.

Technology Integration Experiences of Teachers

Science.gov (United States)

Çoklar, Ahmet Naci; Yurdakul, Isil Kabakçi

2017-01-01

Teachers are important providers of educational sustainability. Teachers' ability to adapt themselves to rapidly developing technologies applicable to learning environments is connected with technology integration. The purpose of this study is to investigate teachers' technology integration experiences in the course of learning and teaching…

Z-2 Space Suit: A Case Study in Human Spaceflight Public Outreach

Science.gov (United States)

McFarland, Shane M.

2016-01-01

NASA Johnson Space Center's Z-series of planetary space suit prototypes is an iterative development platform with a Mars-forward design philosophy, targeting a Mars surface mission in the mid-2030s. The first space suit assembly, called the Z-1, was delivered in 2012. While meeting the project's stated requirements and objectives, the general public's reception primarily focused on the color scheme, which vaguely invoked similarity to a certain animated cartoon character. The public at large has and continues to be exposed to varying space suit design aesthetics from popular culture and low TRL technology maturation efforts such as mechanical counterpressure. The lesson learned was that while the design aesthetic is not important from an engineering perspective, the perception of the public is important for NASA and human spaceflight in general. For the Z-2 space suit, an integrated public outreach strategy was employed to engage, excite and educate the public on the current technology of space suits and NASA's plans moving forward. The keystone of this strategy was a public vote on three different suit cover layer aesthetics, the winner of which would be used as inspiration in fabrication. Other components included social media, university collaboration, and select media appearances, the cumulative result of which, while intangible in its benefit, was ultimately a positive effect in terms of the image of NASA as well as the dissemination of information vital to dispelling public misconceptions.

Open architecture of smart sensor suites

Science.gov (United States)

Müller, Wilmuth; Kuwertz, Achim; Grönwall, Christina; Petersson, Henrik; Dekker, Rob; Reinert, Frank; Ditzel, Maarten

2017-10-01

Experiences from recent conflicts show the strong need for smart sensor suites comprising different multi-spectral imaging sensors as core elements as well as additional non-imaging sensors. Smart sensor suites should be part of a smart sensor network - a network of sensors, databases, evaluation stations and user terminals. Its goal is to optimize the use of various information sources for military operations such as situation assessment, intelligence, surveillance, reconnaissance, target recognition and tracking. Such a smart sensor network will enable commanders to achieve higher levels of situational awareness. Within the study at hand, an open system architecture was developed in order to increase the efficiency of sensor suites. The open system architecture for smart sensor suites, based on a system-of-systems approach, enables combining different sensors in multiple physical configurations, such as distributed sensors, co-located sensors combined in a single package, tower-mounted sensors, sensors integrated in a mobile platform, and trigger sensors. The architecture was derived from a set of system requirements and relevant scenarios. Its mode of operation is adaptable to a series of scenarios with respect to relevant objects of interest, activities to be observed, available transmission bandwidth, etc. The presented open architecture is designed in accordance with the NATO Architecture Framework (NAF). The architecture allows smart sensor suites to be part of a surveillance network, linked e.g. to a sensor planning system and a C4ISR center, and to be used in combination with future RPAS (Remotely Piloted Aircraft Systems) for supporting a more flexible dynamic configuration of RPAS payloads.

Clementine sensor suite

Energy Technology Data Exchange (ETDEWEB)

Ledebuhr, A.G. [Lawrence Livermore National Lab., CA (United States)

1994-11-15

LLNL designed and built the suite of six miniaturized light-weight space-qualified sensors utilized in the Clementine mission. A major goal of the Clementine program was to demonstrate technologies originally developed for Ballistic Missile Defense Organization Programs. These sensors were modified to gather data from the moon. This overview presents each of these sensors and some preliminary on-orbit performance estimates. The basic subsystems of these sensors include optical baffles to reject off-axis stray light, light-weight ruggedized optical systems, filter wheel assemblies, radiation tolerant focal plane arrays, radiation hardened control and readout electronics and low mass and power mechanical cryogenic coolers for the infrared sensors. Descriptions of each sensor type are given along with design specifications, photographs and on-orbit data collected.

Walking a mile in another's shoes: The impact of wearing an Age Suit.

Science.gov (United States)

Lavallière, Martin; D'Ambrosio, Lisa; Gennis, Angelina; Burstein, Arielle; Godfrey, Kathryn M; Waerstad, Hilde; Puleo, Rozanne M; Lauenroth, Andreas; Coughlin, Joseph F

2017-01-01

The "Age Suit" described in this article was developed to enable future designers, business leaders, and engineers to experience navigating the world as many older adults must. Tools such as this Age Suit offer the opportunity to "walk a mile" in another's shoes to develop empathy that can result in better design of spaces, goods, and services to meet the needs of a rapidly growing older population. This work first examined, through a series of clinical tests, whether younger adults' physical capacities were reduced in a direction consistent with aging by wearing a suit developed by the MIT AgeLab. An experiential learning task was then completed with the suit to understand its impact on completion of an instrumental activity of daily living. Results showed that younger adults wearing the suit experienced changes in task performance consistent with expected changes associated with aging. Participants' self-reports from the experiential learning task indicated that they were able to empathize with older adults regarding some issues they face while completing a grocery shopping task. Future research with the suit should involve a wider range of individuals from the population and examine what effect participants' levels of fitness have on the experience of wearing the suit.

How medical technologies shape the experience of illness.

Science.gov (United States)

Hofmann, Bjørn; Svenaeus, Fredrik

2018-02-03

In this article we explore how diagnostic and therapeutic technologies shape the lived experiences of illness for patients. By analysing a wide range of examples, we identify six ways that technology can (trans)form the experience of illness (and health). First, technology may create awareness of disease by revealing asymptomatic signs or markers (imaging techniques, blood tests). Second, the technology can reveal risk factors for developing diseases (e.g., high blood pressure or genetic tests that reveal risks of falling ill in the future). Third, the technology can affect and change an already present illness experience (e.g., the way blood sugar measurement affects the perceived symptoms of diabetes). Fourth, therapeutic technologies may redefine our experiences of a certain condition as diseased rather than unfortunate (e.g. assisted reproductive technologies or symptom based diagnoses in psychiatry). Fifth, technology influences illness experiences through altering social-cultural norms and values regarding various diagnoses. Sixth, technology influences and changes our experiences of being healthy in contrast and relation to being diseased and ill. This typology of how technology forms illness and related conditions calls for reflection regarding the phenomenology of technology and health. How are medical technologies and their outcomes perceived and understood by patients? The phenomenological way of approaching illness as a lived, bodily being-in-the-world is an important approach for better understanding and evaluating the effects that medical technologies may have on our health, not only in defining, diagnosing, or treating diseases, but also in making us feel more vulnerable and less healthy in different regards.

The CMSSW benchmarking suite: Using HEP code to measure CPU performance

International Nuclear Information System (INIS)

Benelli, G

2010-01-01

The demanding computing needs of the CMS experiment require thoughtful planning and management of its computing infrastructure. A key factor in this process is the use of realistic benchmarks when assessing the computing power of the different architectures available. In recent years a discrepancy has been observed between the CPU performance estimates given by the reference benchmark for HEP computing (SPECint) and actual performances of HEP code. Making use of the CPU performance tools from the CMSSW performance suite, comparative CPU performance studies have been carried out on several architectures. A benchmarking suite has been developed and integrated in the CMSSW framework, to allow computing centers and interested third parties to benchmark architectures directly with CMSSW. The CMSSW benchmarking suite can be used out of the box, to test and compare several machines in terms of CPU performance and report with the wanted level of detail the different benchmarking scores (e.g. by processing step) and results. In this talk we describe briefly the CMSSW software performance suite, and in detail the CMSSW benchmarking suite client/server design, the performance data analysis and the available CMSSW benchmark scores. The experience in the use of HEP code for benchmarking will be discussed and CMSSW benchmark results presented.

Safety Precautions and Operating Procedures in an (A)BSL-4 Laboratory: 1. Biosafety Level 4 Suit Laboratory Suite Entry and Exit Procedures.

Science.gov (United States)

Janosko, Krisztina; Holbrook, Michael R; Adams, Ricky; Barr, Jason; Bollinger, Laura; Newton, Je T'aime; Ntiforo, Corrie; Coe, Linda; Wada, Jiro; Pusl, Daniela; Jahrling, Peter B; Kuhn, Jens H; Lackemeyer, Matthew G

2016-10-03

Biosafety level 4 (BSL-4) suit laboratories are specifically designed to study high-consequence pathogens for which neither infection prophylaxes nor treatment options exist. The hallmarks of these laboratories are: custom-designed airtight doors, dedicated supply and exhaust airflow systems, a negative-pressure environment, and mandatory use of positive-pressure ("space") suits. The risk for laboratory specialists working with highly pathogenic agents is minimized through rigorous training and adherence to stringent safety protocols and standard operating procedures. Researchers perform the majority of their work in BSL-2 laboratories and switch to BSL-4 suit laboratories when work with a high-consequence pathogen is required. Collaborators and scientists considering BSL-4 projects should be aware of the challenges associated with BSL-4 research both in terms of experimental technical limitations in BSL-4 laboratory space and the increased duration of such experiments. Tasks such as entering and exiting the BSL-4 suit laboratories are considerably more complex and time-consuming compared to BSL-2 and BSL-3 laboratories. The focus of this particular article is to address basic biosafety concerns and describe the entrance and exit procedures for the BSL-4 laboratory at the NIH/NIAID Integrated Research Facility at Fort Detrick. Such procedures include checking external systems that support the BSL-4 laboratory, and inspecting and donning positive-pressure suits, entering the laboratory, moving through air pressure-resistant doors, and connecting to air-supply hoses. We will also discuss moving within and exiting the BSL-4 suit laboratories, including using the chemical shower and removing and storing positive-pressure suits.

A model for choosing an automated ultraviolet-C disinfection system and building a case for the C-suite: Two case reports.

Science.gov (United States)

Spencer, Maureen; Vignari, Michelle; Bryce, Elizabeth; Johnson, Helen Boehm; Fauerbach, Loretta; Graham, Denise

2017-03-01

Environmental disinfection has become the new frontier in the ongoing battle to reduce the risk of health care-associated infections. Evidence demonstrating the persistent contamination of environmental surfaces despite traditional cleaning and disinfection methods has led to the widespread acceptance that there is both a need for reassessing traditional cleaning protocols and for using secondary disinfection technologies. Ultraviolet-C (UV-C) disinfection is one type of no-touch technology shown to be a successful adjunct to manual cleaning in reducing environmental bioburden. The dilemma for the infection preventionist, however, is how to choose the system best suited for their facility among the many UV-C surface disinfection delivery systems available and how to build a case for acquisition to present to the hospital administration/C-suite. This article proposes an approach to these dilemmas based in part on the experience of 2 health care networks. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Integrated Instrument Simulator Suites for Earth Science

Science.gov (United States)

Tanelli, Simone; Tao, Wei-Kuo; Matsui, Toshihisa; Hostetler, Chris; Hair, John; Butler, Carolyn; Kuo, Kwo-Sen; Niamsuwan, Noppasin; Johnson, Michael P.; Jacob, Joseph C.;

Instant Spring Tool Suite

CERN Document Server

Chiang, Geoff

2013-01-01

Filled with practical, step-by-step instructions and clear explanations for the most important and useful tasks. A tutorial guide that walks you through how to use the features of Spring Tool Suite using well defined sections for the different parts of Spring.Instant Spring Tool Suite is for novice to intermediate Java developers looking to get a head-start in enterprise application development using Spring Tool Suite and the Spring framework. If you are looking for a guide for effective application development using Spring Tool Suite, then this book is for you.

Mediated Effects of Technology Competencies and Experiences on Relations among Attitudes Towards Technology Use, Technology Ownership, and Self Efficacy about Technological Pedagogical Content Knowledge

Science.gov (United States)

Yerdelen-Damar, Sevda; Boz, Yezdan; Aydın-Günbatar, Sevgi

2017-08-01

This study examined the relations of preservice science teachers' attitudes towards technology use, technology ownership, technology competencies, and experiences to their self-efficacy beliefs about technological pedagogical content knowledge (TPACK). The present study also investigated interrelations among preservice teachers' attitudes towards technology use, technology ownership, technology competencies, and experiences. The participants of study were 665 elementary preservice science teachers (467 females, 198 males) from 7 colleges in Turkey. The proposed model based on educational technology literature was tested using structural equation modeling. The model testing results revealed that preservice teachers' technology competencies and experiences mediated the relation of technology ownership to their TPACK self efficacy beliefs. The direct relation of their possession of technology to their TPACK self efficacy beliefs was insignificant while the indirect relation through their technology competencies and experiences was significant. The results also indicated there were significant direct effects of preservice teachers' attitudes towards technology use, technology competencies, and experiences on their TPACK self efficacy beliefs.

Space suit bioenergetics: framework and analysis of unsuited and suited activity.

Science.gov (United States)

Carr, Christopher E; Newman, Dava J

2007-11-01

Metabolic costs limit the duration and intensity of extravehicular activity (EVA), an essential component of future human missions to the Moon and Mars. Energetics Framework: We present a framework for comparison of energetics data across and between studies. This framework, applied to locomotion, differentiates between muscle efficiency and energy recovery, two concepts often confused in the literature. The human run-walk transition in Earth gravity occurs at the point for which energy recovery is approximately the same for walking and running, suggesting a possible role for recovery in gait transitions. Muscular Energetics: Muscle physiology limits the overall efficiency by which chemical energy is converted through metabolism to useful work. Unsuited Locomotion: Walking and running use different methods of energy storage and release. These differences contribute to the relative changes in the metabolic cost of walking and running as gravity is varied, with the metabolic cost of locomoting at a given velocity changing in proportion to gravity for running and less than in proportion for walking. Space Suits: Major factors affecting the energetic cost of suited movement include suit pressurization, gravity, velocity, surface slope, and space suit configuration. Apollo lunar surface EVA traverse metabolic rates, while unexpectedly low, were higher than other activity categories. The Lunar Roving Vehicle facilitated even lower metabolic rates, thus longer duration EVAs. Muscles and tendons act like springs during running; similarly, longitudinal pressure forces in gas pressure space suits allow spring-like storage and release of energy when suits are self-supporting.

Results from Carbon Dioxide Washout Testing Using a Suited Manikin Test Apparatus with a Space Suit Ventilation Test Loop

Science.gov (United States)

Chullen, Cinda; Conger, Bruce; McMillin, Summer; Vonau, Walt; Kanne, Bryan; Korona, Adam; Swickrath, Mike

2016-01-01

NASA is developing an advanced portable life support system (PLSS) to meet the needs of a new NASA advanced space suit. The PLSS is one of the most critical aspects of the space suit providing the necessary oxygen, ventilation, and thermal protection for an astronaut performing a spacewalk. The ventilation subsystem in the PLSS must provide sufficient carbon dioxide (CO2) removal and ensure that the CO2 is washed away from the oronasal region of the astronaut. CO2 washout is a term used to describe the mechanism by which CO2 levels are controlled within the helmet to limit the concentration of CO2 inhaled by the astronaut. Accumulation of CO2 in the helmet or throughout the ventilation loop could cause the suited astronaut to experience hypercapnia (excessive carbon dioxide in the blood). A suited manikin test apparatus (SMTA) integrated with a space suit ventilation test loop was designed, developed, and assembled at NASA in order to experimentally validate adequate CO2 removal throughout the PLSS ventilation subsystem and to quantify CO2 washout performance under various conditions. The test results from this integrated system will be used to validate analytical models and augment human testing. This paper presents the system integration of the PLSS ventilation test loop with the SMTA including the newly developed regenerative Rapid Cycle Amine component used for CO2 removal and tidal breathing capability to emulate the human. The testing and analytical results of the integrated system are presented along with future work.

Using Piezoelectric Ceramics for Dust Mitigation of Space Suits

Science.gov (United States)

Angel, Heather K.

2004-01-01

The particles that make up moon dust and Mars soil can be hazardous to an astronaut s health if not handled properly. In the near future, while exploring outer space, astronauts plan to wander the surfaces of unknown planets. During these explorations, dust and soil will cling to their space suits and become imbedded in the fabric. The astronauts will track moon dust and mars soil back into their living quarters. This not only will create a mess with millions of tiny air-born particles floating around, but will also be dangerous in the case that the fine particles are breathed in and become trapped in an astronaut s lungs. research center are investigating ways to remove these particles from space suits. This problem is very difficult due to the nature of the particles: They are extremely small and have jagged edges which can easily latch onto the fibers of the fabric. For the past summer, I have been involved in researching the potential problems, investigating ways to remove the particles, and conducting experiments to validate the techniques. The current technique under investigation uses piezoelectric ceramics imbedded in the fabric that vibrate and shake the particles free. The particles will be left on the planet s surface or collected a vacuum to be disposed of later. The ceramics vibrate when connected to an AC voltage supply and create a small scale motion similar to what people use at the beach to shake sand off of a beach towel. Because the particles are so small, similar to volcanic ash, caution must be taken to make sure that this technique does not further inbed them in the fabric and make removal more difficult. Only a very precise range of frequency and voltage will produce a suitable vibration. My summer project involved many experiments to determine the correct range. Analysis involved hands on experience with oscilloscopes, amplifiers, piezoelectrics, a high speed camera, microscopes and computers. perfect this technology. Someday, vibration to

Metabolic and Subjective Results Review of the Integrated Suit Test Series

Science.gov (United States)

Norcross, J.R.; Stroud, L.C.; Klein, J.; Desantis, L.; Gernhardt, M.L.

2009-01-01

Crewmembers will perform a variety of exploration and construction activities on the lunar surface. These activities will be performed while inside an extravehicular activity (EVA) spacesuit. In most cases, human performance is compromised while inside an EVA suit as compared to a crewmember s unsuited performance baseline. Subjects completed different EVA type tasks, ranging from ambulation to geology and construction activities, in different lunar analog environments including overhead suspension, underwater and 1-g lunar-like terrain, in both suited and unsuited conditions. In the suited condition, the Mark III (MKIII) EVA technology demonstrator suit was used and suit pressure and suit weight were parameters tested. In the unsuited conditions, weight, mass, center of gravity (CG), terrain type and navigation were the parameters. To the extent possible, one parameter was varied while all others were held constant. Tests were not fully crossed, but rather one parameter was varied while all others were left in the most nominal setting. Oxygen consumption (VO2), modified Cooper-Harper (CH) ratings of operator compensation and ratings of perceived exertion (RPE) were measured for each trial. For each variable, a lower value correlates to more efficient task performance. Due to a low sample size, statistical significance was not attainable. Initial findings indicate that suit weight, CG and the operational environment can have a large impact on human performance during EVA. Systematic, prospective testing series such as those performed to date will enable a better understanding of the crucial interactions of the human and the EVA suit system and their environment. However, work remains to be done to confirm these findings. These data have been collected using only unsuited subjects and one EVA suit prototype that is known to fit poorly on a large demographic of the astronaut population. Key findings need to be retested using an EVA suit prototype better suited to a

G SUIT FOR EDUCATION AS AN ENVIRONMENT FOR STUDENTS OF EDUCATIONAL PRACTICES

OpenAIRE

Olena Glazunova; Olena Kuzminska; Tetyana Voloshyna; Taisia Sayapina; Valentyna Korolchuk

2017-01-01

Materials article analyzes the opportunities and benefits of using cloud services G Suite (Google Apps) during the practical training of students. In the course of the study, an e-environment based on G Suit for Education was developed and its use for effective organization of information technology practice training. A model of e-learning environment for organizing group project work in Google Classroom-based training has been built. The design methodology is grounded as one of the most effe...

Adaptation of the Austrian biogas technology to suit conditions in developing countries in the tropical zone. Intermediate report. Adaptierung der oesterreichischen Biogastechnologie an Gegebenheiten in Entwicklungslaendern in der tropischen Zone. Zwischenbericht

Energy Technology Data Exchange (ETDEWEB)

Padinger, R

1983-11-01

Within the framework of the objective project 'Adaptation of the Austrian biogas technology to suit conditions in developing countries in the tropical zone' and using the example of the planning for a biogas installation on the Cape Verde Islands, a record was made of experience gained in achieving optimum technology transfer and from which recommendations are made for the implementation of further development aid projects in the biogas sector. The interim report on hand describes the current status of the project. After a description of the situation on the Cape Verde Islands, a commentary is given on the objectives in the planning of the biogas installation, taking into consideration the regional conditions. In addition to a description of the measures taken during planning to achieve optimum adaptation of the installation to the prevailing circumstances, a detailed record is given of the problems encountered within the scope of the planning in the pursuit of this objective, together with the difficulties involved in eliminating these problems. (orig./EF).

The Los Alamos suite of relativistic atomic physics codes

International Nuclear Information System (INIS)

Fontes, C J; Zhang, H L; Jr, J Abdallah; Clark, R E H; Kilcrease, D P; Colgan, J; Cunningham, R T; Hakel, P; Magee, N H; Sherrill, M E

2015-01-01

The Los Alamos suite of relativistic atomic physics codes is a robust, mature platform that has been used to model highly charged ions in a variety of ways. The suite includes capabilities for calculating data related to fundamental atomic structure, as well as the processes of photoexcitation, electron-impact excitation and ionization, photoionization and autoionization within a consistent framework. These data can be of a basic nature, such as cross sections and collision strengths, which are useful in making predictions that can be compared with experiments to test fundamental theories of highly charged ions, such as quantum electrodynamics. The suite can also be used to generate detailed models of energy levels and rate coefficients, and to apply them in the collisional-radiative modeling of plasmas over a wide range of conditions. Such modeling is useful, for example, in the interpretation of spectra generated by a variety of plasmas. In this work, we provide a brief overview of the capabilities within the Los Alamos relativistic suite along with some examples of its application to the modeling of highly charged ions. (paper)

RAJA Performance Suite

Energy Technology Data Exchange (ETDEWEB)

2017-09-01

The RAJA Performance Suite is designed to evaluate performance of the RAJA performance portability library on a wide variety of important high performance computing (HPC) algorithmic lulmels. These kernels assess compiler optimizations and various parallel programming model backends accessible through RAJA, such as OpenMP, CUDA, etc. The Initial version of the suite contains 25 computational kernels, each of which appears in 6 variants: Baseline SequcntiaJ, RAJA SequentiaJ, Baseline OpenMP, RAJA OpenMP, Baseline CUDA, RAJA CUDA. All variants of each kernel perform essentially the same mathematical operations and the loop body code for each kernel is identical across all variants. There are a few kernels, such as those that contain reduction operations, that require CUDA-specific coding for their CUDA variants. ActuaJ computer instructions executed and how they run in parallel differs depending on the parallel programming model backend used and which optimizations are perfonned by the compiler used to build the Perfonnance Suite executable. The Suite will be used primarily by RAJA developers to perform regular assessments of RAJA performance across a range of hardware platforms and compilers as RAJA features are being developed. It will also be used by LLNL hardware and software vendor panners for new defining requirements for future computing platform procurements and acceptance testing. In particular, the RAJA Performance Suite will be used for compiler acceptance testing of the upcoming CORAUSierra machine {initial LLNL delivery expected in late-2017/early 2018) and the CORAL-2 procurement. The Suite will aJso be used to generate concise source code reproducers of compiler and runtime issues we uncover so that we may provide them to relevant vendors to be fixed.

DEALed : A tool suite for distributed real-time systems development

NARCIS (Netherlands)

Bolshakov, K.; Karpov, Y.; Sintotski, A.; Malyshkin, V.

1999-01-01

DEALed is a tool suite for development of distributed systems using DEAL language. DEAL is being developed at Eindhoven University of Technology as a part of DEDOS project. Area of application of the DEALed is the development of the distributed real- time safety-critical control systems.

Technologies of democracy: experiments and demonstrations.

Science.gov (United States)

Laurent, Brice

2011-12-01

Technologies of democracy are instruments based on material apparatus, social practices and expert knowledge that organize the participation of various publics in the definition and treatment of public problems. Using three examples related to the engagement of publics in nanotechnology in France (a citizen conference, a series of public meetings, and an industrial design process), the paper argues that Science and Technology Studies provide useful tools and methods for the analysis of technologies of democracy. Operations of experiments and public demonstrations can be described, as well as controversies about technologies of democracy giving rise to counter-experiments and counter-demonstrations. The political value of the analysis of public engagement lies in the description of processes of stabilization of democratic orders and in the display of potential alternative political arrangements.

Interaction of Space Suits with Windblown Soil: Preliminary Mars Wind Tunnel Results

Science.gov (United States)

Marshall, J.; Bratton, C.; Kosmo, J.; Trevino, R.

1999-09-01

Experiments in the Mars Wind Tunnel at NASA Ames Research Center show that under Mars conditions, spacesuit materials are highly susceptible to dust contamination when exposed to windblown soil. This effect was suspected from knowledge of the interaction of electrostatically adhesive dust with solid surfaces in general. However, it is important to evaluate the respective roles of materials, meteorological and radiation effects, and the character of the soil. The tunnel permits evaluation of dust contamination and sand abrasion of space suits by simulating both pressure and wind conditions on Mars. The long-term function of space suits on Mars will be primarily threatened by dust contamination. Lunar EVA activities caused heavy contamination of space suits, but the problem was never seriously manifest because of the brief utilization of the suits, and the suits were never reused. Electrostatically adhering dust grains have various detrimental effects: (1) penetration and subsequent wear of suit fabrics, (2) viewing obscuration through visors and scratching/pitting of visor surfaces, (3) penetration, wear, and subsequent seizing-up of mechanical suit joints, (4) changes in albedo and therefore of radiation properties of external heat-exchanger systems, (5) changes in electrical conductivity of suit surfaces which may affect tribocharging of suits and create spurious discharge effects detrimental to suit electronics/radio systems. Additional information is contained in the original.

Closed-Loop, Non-Venting Thermal Control for Mars EVA Suits, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — NASA seeks new thermal control technology for EVA suits on Mars. The system must be closed-loop and non-venting, have negligible impact on the Martian environment,...

Apparatus for storing protective suits

International Nuclear Information System (INIS)

Englemann, H.J.; Koller, J.; Schrader, H.R.; Schade, G.; Pedrerol, J.

1975-01-01

Arrangements are described for storing one or more protective suits when contaminated on the outside. In order to permit a person wearing a contaminated suit to leave a contaminated area safely, and without contaminating the environment, it has hitherto been the practice for the suit to be passed through a 'lock' and cleansed under decontaminating showers whilst still being worn. This procedure is time wasting and not always completely effective, and it may be necessary to provide a second suit for use whilst the first suit is being decontaminated. Repeated decontamination may also result in undue wear and tear. The arrangements described provide a 'lock' chamber in which a contaminated suit may be stowed away without its interior becoming contaminated, thus allowing repeated use by persons donning and shedding it. (U.K.)

Pharmacy settles suit.

Science.gov (United States)

1998-10-02

A suit was filed by an HIV-positive man against a pharmacy that inadvertently disclosed his HIV status to his ex-wife and children. His ex-wife tried to use the information in a custody battle for their two children. The suit against the pharmacy was settled, but the terms of the settlement remain confidential.

NEDE: an open-source scripting suite for developing experiments in 3D virtual environments.

Science.gov (United States)

Jangraw, David C; Johri, Ansh; Gribetz, Meron; Sajda, Paul

2014-09-30

As neuroscientists endeavor to understand the brain's response to ecologically valid scenarios, many are leaving behind hyper-controlled paradigms in favor of more realistic ones. This movement has made the use of 3D rendering software an increasingly compelling option. However, mastering such software and scripting rigorous experiments requires a daunting amount of time and effort. To reduce these startup costs and make virtual environment studies more accessible to researchers, we demonstrate a naturalistic experimental design environment (NEDE) that allows experimenters to present realistic virtual stimuli while still providing tight control over the subject's experience. NEDE is a suite of open-source scripts built on the widely used Unity3D game development software, giving experimenters access to powerful rendering tools while interfacing with eye tracking and EEG, randomizing stimuli, and providing custom task prompts. Researchers using NEDE can present a dynamic 3D virtual environment in which randomized stimulus objects can be placed, allowing subjects to explore in search of these objects. NEDE interfaces with a research-grade eye tracker in real-time to maintain precise timing records and sync with EEG or other recording modalities. Python offers an alternative for experienced programmers who feel comfortable mastering and integrating the various toolboxes available. NEDE combines many of these capabilities with an easy-to-use interface and, through Unity's extensive user base, a much more substantial body of assets and tutorials. Our flexible, open-source experimental design system lowers the barrier to entry for neuroscientists interested in developing experiments in realistic virtual environments. Copyright © 2014 Elsevier B.V. All rights reserved.

Study of the suit inflation effect on crew safety during landing using a full-pressure IVA suit for new-generation reentry space vehicles

Science.gov (United States)

Wataru, Suzuki

Recently, manned space capsules have been recognized as beneficial and reasonable human space vehicles again. The Dragon capsule already achieved several significant successes. The Orion capsule is going to be sent to a high-apogee orbit without crews for experimental purposes in September 2014. For such human-rated space capsules, the study of acceleration impacts against the human body during splashdown is essential to ensure the safety of crews. Moreover, it is also known that wearing a full pressure rescue suit significantly increases safety of a crew, compared to wearing a partial pressure suit. This is mainly because it enables the use of a personal life support system independently in addition to that which installed in the space vehicle. However, it is unclear how the inflation of the full pressure suit due to pressurization affects the crew safety during splashdown, especially in the case of the new generation manned space vehicles. Therefore, the purpose of this work is to investigate the effect of the suit inflation on crew safety against acceleration impact during splashdown. For this objective, the displacements of the safety harness in relation with the suit, a human surrogate, and the crew seats during pressurizing the suit in order to determine if the safety and survivability of a crew can be improved by wearing a full pressure suit. For these tests, the DL/H-1 full pressure IVA suit, developed by Pablo de Leon and Gary L. Harris, will be used. These tests use image analysis techniques to determine the displacements. It is expected, as a result of these tests, that wearing a full pressure suit will help to mitigate the impacts and will increase the safety and survivability of a crew during landing since it works as a buffer to mitigate impact forces during splashdown. This work also proposes a future plan for sled test experiments using a sled facility such as the one in use by the Civil Aerospace Medical Institute (CAMI) for experimental validation

Experience with technology dynamics of user experience with mobile media devices

CERN Document Server

al-Azzawi, Ali

2013-01-01

With a focus on gaining an empirically derived understanding of the underlying psychological dimensions and processes behind people’s experiences with technology, this book contributes to the debate of user experience (UX) within several disciplines, including HCI, design and marketing. It analyses UX dynamics at various time scales, and explores the very nature of time and meaning in the context of UX.Experience with Technology uses personal construct theory (PCT) as a theoretical and methodological starting point to this project. Major case-studies are described that examine people’s exp

Radiation Protection Studies of International Space Station Extravehicular Activity Space Suits

Science.gov (United States)

Cucinotta, Francis A. (Editor); Shavers, Mark R. (Editor); Saganti, Premkumar B. (Editor); Miller, Jack (Editor)

2003-01-01

This publication describes recent investigations that evaluate radiation shielding characteristics of NASA's and the Russian Space Agency's space suits. The introduction describes the suits and presents goals of several experiments performed with them. The first chapter provides background information about the dynamic radiation environment experienced at ISS and summarized radiation health and protection requirements for activities in low Earth orbit. Supporting studies report the development and application of a computer model of the EMU space suit and the difficulty of shielding EVA crewmembers from high-energy reentrant electrons, a previously unevaluated component of the space radiation environment. Chapters 2 through 6 describe experiments that evaluate the space suits' radiation shielding characteristics. Chapter 7 describes a study of the potential radiological health impact on EVA crewmembers of two virtually unexamined environmental sources of high-energy electrons-reentrant trapped electrons and atmospheric albedo or "splash" electrons. The radiological consequences of those sources have not been evaluated previously and, under closer scrutiny. A detailed computational model of the shielding distribution provided by components of the NASA astronauts' EMU is being developed for exposure evaluation studies. The model is introduced in Chapters 8 and 9 and used in Chapter 10 to investigate how trapped particle anisotropy impacts female organ doses during EVA. Chapter 11 presents a review of issues related to estimating skin cancer risk form space radiation. The final chapter contains conclusions about the protective qualities of the suit brought to light form these studies, as well as recommendations for future operational radiation protection.

A Method for and Issues Associated with the Determination of Space Suit Joint Requirements

Science.gov (United States)

Matty, Jennifer E.; Aitchison, Lindsay

2009-01-01

In the design of a new space suit it is necessary to have requirements that define what mobility space suit joints should be capable of achieving in both a system and at the component level. NASA elected to divide mobility into its constituent parts-range of motion (ROM) and torque- in an effort to develop clean design requirements that limit subject performance bias and are easily verified. Unfortunately, the measurement of mobility can be difficult to obtain. Current technologies, such as the Vicon motion capture system, allow for the relatively easy benchmarking of range of motion (ROM) for a wide array of space suit systems. The ROM evaluations require subjects in the suit to accurately evaluate the ranges humans can achieve in the suit. However, when it comes to torque, there are significant challenges for both benchmarking current performance and writing requirements for future suits. This is reflected in the fact that torque definitions have been applied to very few types of space suits and with limited success in defining all the joints accurately. This paper discussed the advantages and disadvantages to historical joint torque evaluation methods, describes more recent efforts directed at benchmarking joint torques of prototype space suits, and provides an outline for how NASA intends to address joint torque in design requirements for the Constellation Space Suit System (CSSS).

NIH bows to part of Rifkin suit.

Science.gov (United States)

Sun, M

1984-11-30

Having lost a round in its legal battle with Jeremy Rifkin over field tests of genetically engineered bacteria, the National Institutes of Health will conduct the simpler of two ecological analyses required by the National Environmental Policy Act on three proposed experiments. In May 1984 a federal district court ruling halted a University of California field test pending a decision on Rifkin's 1983 suit, which alleged that NIH had violated the Act by approving experiments without studying the ecological consequences. Still to be decided by the U.S. Court of Appeals is whether NIH must also issue full-scale environmental impact statements.

Mission Specialist Scott Parazynski checks his flight suit

Science.gov (United States)

1998-01-01

STS-95 Mission Specialist Scott E. Parazynski gets help with his flight suit in the Operations and Checkout Building from a suit technician George Brittingham. The final fitting takes place prior to the crew walkout and transport to Launch Pad 39B. Targeted for launch at 2 p.m. EST on Oct. 29, the mission is expected to last 8 days, 21 hours and 49 minutes, and return to KSC at 11:49 a.m. EST on Nov. 7. The STS-95 mission includes research payloads such as the Spartan solar-observing deployable spacecraft, the Hubble Space Telescope Orbital Systems Test Platform, the International Extreme Ultraviolet Hitchhiker, as well as the SPACEHAB single module with experiments on space flight and the aging process.

Durable Suit Bladder with Improved Water Permeability for Pressure and Environment Suits

Science.gov (United States)

Bue, Grant C.; Kuznetz, Larry; Orndoff, Evelyne; Tang, Henry; Aitchison, Lindsay; Ross, Amy

2009-01-01

Water vapor permeability is shown to be useful in rejecting heat and managing moisture accumulation in launch-and-entry pressure suits. Currently this is accomplished through a porous Gortex layer in the Advanced Crew and Escape Suit (ACES) and in the baseline design of the Constellation Suit System Element (CSSE) Suit 1. Non-porous dense monolithic membranes (DMM) that are available offer potential improvements for water vapor permeability with reduced gas leak. Accordingly, three different pressure bladder materials were investigated for water vapor permeability and oxygen leak: ElasthaneTM 80A (thermoplastic polyether urethane) provided from stock polymer material and two custom thermoplastic polyether urethanes. Water vapor, carbon dioxide and oxygen permeability of the DMM's was measured in a 0.13 mm thick stand-alone layer, a 0.08 mm and 0.05 mm thick layer each bonded to two different nylon and polyester woven reinforcing materials. Additional water vapor permeability and mechanical compression measurements were made with the reinforced 0.05 mm thick layers, further bonded with a polyester wicking and overlaid with moistened polyester fleece thermal underwear .This simulated the pressure from a supine crew person. The 0.05 mm thick nylon reinforced sample with polyester wicking layer was further mechanically tested for wear and abrasion. Concepts for incorporating these materials in launch/entry and Extravehicular Activity pressure suits are presented.

Modification and Test of the CSU-13 B/P G-Suit for Use in the F/A-22

National Research Council Canada - National Science Library

Balldin, Ulf; O'Connor, Robert; Isdahl, Wayne; Werchan, Paul

2005-01-01

...., burst leakage, and fill rate up to +9 G. Six human subjects were tested in the centrifuge with the CSU 13 B/P G-suit with hose inlet on the right or left side, and with COMBAT EDGE and Advanced Technology G Suit (CE-ATAGS...

The Combustion Experiment on the Sample Analysis at Mars (SAM) Instrument Suite on the Curiosity Rover

Science.gov (United States)

Stern, J. C.; Malespin, C. A.; Eigenbrode, J. L.; Graham, H. V.; Archer, P. D., Jr.; Brunner, A. E.; Freissinet, C.; Franz, H. B.; Fuentes, J.; Glavin, D. P.;

Designing interactive technology for crowd experiences - beyond sanitization

DEFF Research Database (Denmark)

Veerasawmy, Rune

2014-01-01

This dissertation concerns the topic on designing interactive technology for crowd expe- riences. It takes the outset in the experience-oriented design approach within interaction design, exploring the research question how can we conceptually understand and design interactive technology for crowd...... experiences? Through theoretical studies of sociological crowd theory and pragmatist perspectives on experience combined with design exper- iments at sporting events this dissertation establishes an conceptual understanding of crowd experience. The outcome of this work is furthermore synthesized...... in a conceptual model of social experiences that presents crowd experiences as a distinct type of social experience. This is different from what previously have been explored within experi- ence-oriented design. This dissertation is composed of four research papers framed by an overview that summarizes...

Advanced Communication Technology Satellite (ACTS) multibeam antenna technology verification experiments

Science.gov (United States)

Acosta, Roberto J.; Larko, Jeffrey M.; Lagin, Alan R.

1992-01-01

The Advanced Communication Technology Satellite (ACTS) is a key to reaching NASA's goal of developing high-risk, advanced communications technology using multiple frequency bands to support the nation's future communication needs. Using the multiple, dynamic hopping spot beams, and advanced on board switching and processing systems, ACTS will open a new era in communications satellite technology. One of the key technologies to be validated as part of the ACTS program is the multibeam antenna with rapidly reconfigurable hopping and fixed spot beam to serve users equipped with small-aperature terminals within the coverage areas. The proposed antenna technology experiments are designed to evaluate in-orbit ACTS multibeam antenna performance (radiation pattern, gain, cross pol levels, etc.).

G SUIT FOR EDUCATION AS AN ENVIRONMENT FOR STUDENTS OF EDUCATIONAL PRACTICES

Directory of Open Access Journals (Sweden)

Olena Glazunova

2017-04-01

Full Text Available Materials article analyzes the opportunities and benefits of using cloud services G Suite (Google Apps during the practical training of students. In the course of the study, an e-environment based on G Suit for Education was developed and its use for effective organization of information technology practice training. A model of e-learning environment for organizing group project work in Google Classroom-based training has been built. The design methodology is grounded as one of the most effective for the organization of educational practice in information technologies. The stages of realization of the project task during the educational practice, as well as the tools, the achieved competence, features of the activity of teachers and students at each stage are researched. Examples of tasks, resources and services that were used to achieve project results are given.The implementation of individual project implementation phases in the Google Classroom-based electronic environment has been demonstrated, in particular, project planning, adding new services in the electronic environment, collaborative work with documents, portfolio elements, student reflection. The results of the survey of students on the organization of educational practice using the method of projects and the e-environment based on the use of cloud services G Suite (Google Apps are analyzed.

Using Rapid Improvement Events for Disaster After-Action Reviews: Experience in a Hospital Information Technology Outage and Response.

Science.gov (United States)

Little, Charles M; McStay, Christopher; Oeth, Justin; Koehler, April; Bookman, Kelly

2018-02-01

The use of after-action reviews (AARs) following major emergency events, such as a disaster, is common and mandated for hospitals and similar organizations. There is a recurrent challenge of identified problems not being resolved and repeated in subsequent events. A process improvement technique called a rapid improvement event (RIE) was used to conduct an AAR following a complete information technology (IT) outage at a large urban hospital. Using RIE methodology to conduct the AAR allowed for the rapid development and implementation of major process improvements to prepare for future IT downtime events. Thus, process improvement methodology, particularly the RIE, is suited for conducting AARs following disasters and holds promise for improving outcomes in emergency management. Little CM , McStay C , Oeth J , Koehler A , Bookman K . Using rapid improvement events for disaster after-action reviews: experience in a hospital information technology outage and response. Prehosp Disaster Med. 2018;33(1):98-100.

To what extent could Business Process Management Suite (BPMS) contribute positively to e-learning?

OpenAIRE

Keat Khoo, Thean

2009-01-01

The purpose of this paper is to evaluate the effectiveness of Business Process Management Suite (BPMS) as a teaching-learning technology with the lens of the conversational framework (Laurillard 2002). The paper hopes to link commercial technological development with research in teaching-learning technologies and bring about better collaboration between the two. This theoretical evaluation aims to address the preliminary question - could educational communities adopt BPMS, a tool that has evo...

Inertial motion capture system for biomechanical analysis in pressure suits

Science.gov (United States)

Di Capua, Massimiliano

. The focus of these evaluations was to quantify the reduction in mobility when operating in any of the evaluated pressure suits. This data should be of value in defining new low cost alternatives for pressure suit performance verification and evaluation. This work demonstrates that the BPMS technology is a viable alternative or companion to optical motion capture; while BPMS is the first motion capture system that has been designed specifically to measure the kinematics of a human in a pressure suit, its capabilities are not constrained to just being a measurement tool. The last section of the manuscript is devoted to future possible uses for the system, with a specific focus on pressure suit applications such in the use of BPMS as a master control interface for robot teleoperation, as well as an input interface for future robotically augmented pressure suits.

NASA Research Announcement Phase 2 Final Report for the Development of a Power Assisted Space Suit Glove

Science.gov (United States)

Lingo, Robert; Cadogan, Dave; Sanner, Rob; Sorenson, Beth

1997-01-01

The main goal of this program was to develop an unobtrusive power-assisted EVA glove metacarpalphalangeal (MCP) joint that could provide the crew member with as close to nude body performance as possible, and to demonstrate the technology feasibility of power assisted space suit components in general. The MCP joint was selected due to its being representative of other space suit joints, such as the shoulder, hip and carpometacarpal joint, that would also greatly benefit from this technology. In order to meet this objective, a development team of highly skilled and experienced personnel was assembled. The team consisted of two main entities. The first was comprised of ILC's experienced EVA space suit glove designers, who had the responsibility of designing and fabricating a low torque MCP joint which would be compatible with power assisted technology. The second part of the team consisted of space robotics experts from the University of Maryland's Space Systems Laboratory. This team took on the responsibility of designing and building the robotics aspects of the power-assist system. Both parties addressed final system integration responsibilities.

Tailoring Vantage 5 (fuel) to suit each operator's need

Energy Technology Data Exchange (ETDEWEB)

Chapin, D L; Secker, J R [Westinghouse Electric Corp., Philadelphia, PA (USA)

1990-03-01

By the end of 1989, Westinghouse Vantage 5 fuel had been reloaded into 36 nuclear power plants. The fuel offers a number of features operators can choose from to suit their own particular needs. Experience so far has shown the fuel to have performed well, with coolant activity levels remaining low. (author).

Space Suit Joint Torque Testing

Science.gov (United States)

Valish, Dana J.

2011-01-01

In 2009 and early 2010, a test was performed to quantify the torque required to manipulate joints in several existing operational and prototype space suits in an effort to develop joint torque requirements appropriate for a new Constellation Program space suit system. The same test method was levied on the Constellation space suit contractors to verify that their suit design meets the requirements. However, because the original test was set up and conducted by a single test operator there was some question as to whether this method was repeatable enough to be considered a standard verification method for Constellation or other future space suits. In order to validate the method itself, a representative subset of the previous test was repeated, using the same information that would be available to space suit contractors, but set up and conducted by someone not familiar with the previous test. The resultant data was compared using graphical and statistical analysis and a variance in torque values for some of the tested joints was apparent. Potential variables that could have affected the data were identified and re-testing was conducted in an attempt to eliminate these variables. The results of the retest will be used to determine if further testing and modification is necessary before the method can be validated.

Early experience with X-ray magnetic resonance fusion for low-flow vascular malformations in the pediatric interventional radiology suite

Energy Technology Data Exchange (ETDEWEB)

Hwang, Tiffany J. [The Children' s Hospital of Philadelphia, Department of Radiology, Philadelphia, PA (United States); Keck School of Medicine of the University of Southern California, Los Angeles, CA (United States); Girard, Erin [Siemens Corporation, Corporate Technology, Princeton, NJ (United States); Shellikeri, Sphoorti; Vossough, Arastoo; Ho-Fung, Victor; Cahill, Anne Marie [The Children' s Hospital of Philadelphia, Department of Radiology, Philadelphia, PA (United States); Setser, Randolph [Siemens Medical Solutions USA, Inc., Hoffman Estates, IL (United States)

2016-03-15

This technical innovation describes our experience using an X-ray magnetic resonance fusion (XMRF) software program to overlay 3-D MR images on real-time fluoroscopic images during sclerotherapy procedures for vascular malformations at a large pediatric institution. Five cases have been selected to illustrate the application and various clinical utilities of XMRF during sclerotherapy procedures as well as the technical limitations of this technique. The cases demonstrate how to use XMRF in the interventional suite to derive additional information to improve therapeutic confidence with regards to the extent of lesion filling and to guide clinical management in terms of intraprocedural interventional measures. (orig.)

MODEL: A software suite for data acquisition

Energy Technology Data Exchange (ETDEWEB)

Sendall, D M; Boissat, C; Bozzoli, W; Burkimsher, P; Jones, R; Matheys, J P; Mornacchi, G; Nguyen, T; Vyvre, P vande; Vascotto, A; Weaver, D [European Organization for Nuclear Research, Geneva (Switzerland). DD Div.

1989-12-01

MODEL is a new suite of modular data-acquisition software. It is aimed at the needs of LEP experiments, and is also general enough to be more widely used. It can accomodate a variety of users styles. It runs on a set of loosely coupled processors, and makes use of the remote procedure call technique. Implemented originally for the VAX family, some of its services have already been extended to other systems, including embedded microprocessors. The software modules available include facilities for data-flow management, a framework for monitoring programs, a window-oriented human interface, an error message utility, a process control utility and a run control scheme. It is already in use in a variety of experiments, and is still under development in the light of user experience. (orig.).

Evaluating Suit Fit Using Performance Degradation

Science.gov (United States)

Margerum, Sarah E.; Cowley, Matthew; Harvill, Lauren; Benson, Elizabeth; Rajulu, Sudhakar

2011-01-01

The Mark III suit has multiple sizes of suit components (arm, leg, and gloves) as well as sizing inserts to tailor the fit of the suit to an individual. This study sought to determine a way to identify the point an ideal suit fit transforms into a bad fit and how to quantify this breakdown using mobility-based physical performance data. This study examined the changes in human physical performance via degradation of the elbow and wrist range of motion of the planetary suit prototype (Mark III) with respect to changes in sizing and as well as how to apply that knowledge to suit sizing options and improvements in suit fit. The methods implemented in this study focused on changes in elbow and wrist mobility due to incremental suit sizing modifications. This incremental sizing was within a range that included both optimum and poor fit. Suited range of motion data was collected using a motion analysis system for nine isolated and functional tasks encompassing the elbow and wrist joints. A total of four subjects were tested with motions involving both arms simultaneously as well as the right arm only. The results were then compared across sizing configurations. The results of this study indicate that range of motion may be used as a viable parameter to quantify at what stage suit sizing causes a detriment in performance; however the human performance decrement appeared to be based on the interaction of multiple joints along a limb, not a single joint angle. The study was able to identify a preliminary method to quantify the impact of size on performance and to develop a means to gauge tolerances around optimal size. More work is needed to improve the assessment of optimal fit and to compensate for multiple joint interactions.

An Effective Strategy to Build Up a Balanced Test Suite for Spectrum-Based Fault Localization

Directory of Open Access Journals (Sweden)

Ning Li

2016-01-01

Full Text Available During past decades, many automated software faults diagnosis techniques including Spectrum-Based Fault Localization (SBFL have been proposed to improve the efficiency of software debugging activity. In the field of SBFL, suspiciousness calculation is closely related to the number of failed and passed test cases. Studies have shown that the ratio of the number of failed and passed test case has more significant impact on the accuracy of SBFL than the total number of test cases, and a balanced test suite is more beneficial to improving the accuracy of SBFL. Based on theoretical analysis, we proposed an PNF (Passed test cases, Not execute Faulty statement strategy to reduce test suite and build up a more balanced one for SBFL, which can be used in regression testing. We evaluated the strategy making experiments using the Siemens program and Space program. Experiments indicated that our PNF strategy can be used to construct a new test suite effectively. Compared with the original test suite, the new one has smaller size (average 90% test case was reduced in experiments and more balanced ratio of failed test cases to passed test cases, while it has the same statement coverage and fault localization accuracy.

Non-Venting Thermal and Humidity Control for EVA Suits

Science.gov (United States)

Izenson, Mike; Chen, Weibo; Bue, Grant

2011-01-01

Future EVA suits need processes and systems to control internal temperature and humidity without venting water to the environment. This paper describes an absorption-based cooling and dehumidification system as well as laboratory demonstrations of the key processes. There are two main components in the system: an evaporation cooling and dehumidification garment (ECDG) that removes both sensible heat and latent heat from the pressure garment, and an absorber radiator that absorbs moisture and rejects heat to space by thermal radiation. This paper discusses the overall design of both components, and presents recent data demonstrating their operation. We developed a design and fabrication approach to produce prototypical heat/water absorbing elements for the ECDG, and demonstrated by test that these elements could absorb heat and moisture at a high flux. Proof-of-concept tests showed that an ECDG prototype absorbs heat and moisture at a rate of 85 W/ft under conditions that simulate operation in an EVA suit. The heat absorption was primarily due to direct absorption of water vapor. It is possible to construct large, flexible, durable cooling patches that can be incorporated into a cooling garment with this system. The proof-of-concept test data was scaled to calculate area needed for full metabolic loads, thus showing that it is feasible to use this technology in an EVA suit. Full-scale, lightweight absorber/radiator modules have also been built and tested. They can reject heat at a flux of 33 W/ft while maintaining ECDG operation at conditions that will provide a cool and dry environment inside the EVA suit.

Optimizing the physical ergonomics indices for the use of partial pressure suits.

Science.gov (United States)

Ding, Li; Li, Xianxue; Hedge, Alan; Hu, Huimin; Feathers, David; Qin, Zhifeng; Xiao, Huajun; Xue, Lihao; Zhou, Qianxiang

2015-03-01

This study developed an ergonomic evaluation system for the design of high-altitude partial pressure suits (PPSs). A total of twenty-one Chinese males participated in the experiment which tested three types of ergonomics indices (manipulative mission, operational reach and operational strength) were studied using a three-dimensional video-based motion capture system, a target-pointing board, a hand dynamometer, and a step-tread apparatus. In total, 36 ergonomics indices were evaluated and optimized using regression and fitting analysis. Some indices that were found to be linearly related and redundant were removed from the study. An optimal ergonomics index system was established that can be used to conveniently and quickly evaluate the performance of different pressurized/non-pressurized suit designs. The resulting ergonomics index system will provide a theoretical basis and practical guidance for mission planners, suit designers and engineers to design equipment for human use, and to aid in assessing partial pressure suits. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

The audio and visual communication systems for suited engineering activities on JET

International Nuclear Information System (INIS)

Pearce, R.J.H.; Bruce, J.; Callaghan, C.; Hart, M.; Martin, P.; Middleton, R.; Tait, J.

2001-01-01

The beryllium and/or tritium contamination of the JET tokamak and auxiliary systems necessitates that many activities are carried out in air line fed pressurised suits. To enable often complex engineering activities to be performed, a number of novel audio and visual and communications systems have been designed. The paper describes these systems which give freedom of visual and audio communication between suited personnel, supervisors, operators and engineers. The system enhances the safety of the working environment as well as helping to minimise the radiation dose to personnel. It is concluded, from a number of years experience of using the audio and visual communications systems for suited operations, that safety and the progress of complex engineering tasks have been significantly enhanced

The audio and visual communication systems for suited engineering activities on JET

Energy Technology Data Exchange (ETDEWEB)

Pearce, R.J.H. E-mail: robert.pearce@jet.uk; Bruce, J.; Callaghan, C.; Hart, M.; Martin, P.; Middleton, R.; Tait, J

2001-11-01

The beryllium and/or tritium contamination of the JET tokamak and auxiliary systems necessitates that many activities are carried out in air line fed pressurised suits. To enable often complex engineering activities to be performed, a number of novel audio and visual and communications systems have been designed. The paper describes these systems which give freedom of visual and audio communication between suited personnel, supervisors, operators and engineers. The system enhances the safety of the working environment as well as helping to minimise the radiation dose to personnel. It is concluded, from a number of years experience of using the audio and visual communications systems for suited operations, that safety and the progress of complex engineering tasks have been significantly enhanced.

Soil treatment technologies: Comparison of field experiences

International Nuclear Information System (INIS)

Hodges, H.I.; Jackson, D.W.; Kline, K.

1992-01-01

A number of on-site soil treatment technologies are available for closure of oil-field waste pits, leaking underground storage tank (LUST) sites, and general hydrocarbon contamination. This paper will contrast Separation Systems Consultants, Inc.'s (SSCI's) field experiences with the following soil restoration techniques: (1) Land Treatment using indigenous microbes; (2) Land Farming using commercial microbes; (3) Low Temperature Thermal Treatment; (4) Solidification. The technologies will be contrasted in terms of regulatory constraints and requirements, key set-up and maintenance consideration, selection factors. Included in the regulatory contrast is the authors' perception of regulatory attitudes toward the techniques. Because this paper is based on actual field experience and projects, the practical aspects of making the technologies work is emphasized

The Influence of Technology on Geographic Cognition and Tourism Experience

DEFF Research Database (Denmark)

Tussyadiah, Iis; Zach, Florian

2011-01-01

Tourists today have access to retrieve voluminous geographic information about destinations while travelling as various context-aware geographic technologies have become increasingly ubiquitous. These technologies are suggested to aid tourists in the process of destination consumption to gain...... meaningful tourism experiences. This study found that people using different types of technologies for everyday routine perceive that these technologies help them with spatial inference to acquire geographic information; making sense of direction and orientation, and interacting with and within places....... Further, within the travel context, geographic technology was found to influence the dimensions of sensory, affective and social experience, as well as the cognitive and bodily experience. The type of technology used for travel was also found to be a significant predictor of the sensory, affective...

Adobe Creative Suite 4 Bible

CERN Document Server

Padova, Ted

2009-01-01

As one of the few books to cover integration and workflow issues between Photoshop, Illustrator, InDesign, GoLive, Acrobat, and Version Cue, this comprehensive reference is the one book that Creative Suite users need; Two well-known and respected authors cover topics such as developing consistent color-managed workflows, moving files among the Creative Suite applications, preparing files for print or the Web, repurposing documents, and using the Creative Suite with Microsoft Office documents; More than 1,200 pages are packed with valuable advice and techniques for tackling common everyday issu

A Foster Care Alumna’s Past and Present Technological Experience

Directory of Open Access Journals (Sweden)

Cesia Roche

2015-04-01

Full Text Available Research on technology use and access among youth raised in non-traditional family structures indicates that the youth’s experiences are different from individuals raised in traditional family structures. Foster care represents a non-traditional family structure that warrants research attention in terms of technology. Using a multicultural feminist framework, the present study explores the past and present technological experience of a woman (30 years old who was raised in the foster care system. The results are presented as a case study documenting her technological experience in foster care, as she transitioned out of the foster care system, and as she has taken on the roles of wife and mother. Results indicated that the participant had limited access to technology while in the foster care system, and this limited technology access related to her current use and perceptions of technology. Directions for future research are provided.

Anesthesia and the pediatric cardiac catheterization suite: a review.

Science.gov (United States)

Lam, Jennifer E; Lin, Erica P; Alexy, Ryan; Aronson, Lori A

2015-02-01

Advances in technology over the last couple of decades have caused a shift in pediatric cardiac catheterization from a primary focus on diagnostics to innovative therapeutic interventions. These improvements allow patients a wider range of nonsurgical options for treatment of congenital heart disease. However, these therapeutic modalities can entail higher risk in an already complex patient population, compounded by the added challenges inherent to the environment of the cardiac catheterization suite. Anesthesiologists caring for children with congenital heart disease must understand not only the pathophysiology of the disease but also the effects the anesthetics and interventions have on the patient in order to provide a safe perioperative course. It is the aim of this article to review the latest catheterization modalities offered to patients with congenital heart disease, describe the unique challenges presented in the cardiac catheterization suite, list the most common complications encountered during catheterization and finally, to review the literature regarding different anesthetic drugs used in the catheterization lab. © 2014 John Wiley & Sons Ltd.

Improved airline-type supplied-air plastic suit

International Nuclear Information System (INIS)

Jolley, L. Jr.; Zippler, D.B.; Cofer, C.H.; Harper, J.A.

1978-06-01

Two piece supplied-air plastic suits are used extensively at the Savannah River Plant for personnel protection against inhalation of airborne plutonium and tritium. Worker comfort and noise level problems gave impetus to development of an improved suit and aid distribution system. The resulting plastic suit and development work are discussed. The plastic suit unit cost is less than $20, the hearing zone noise level is less than 75 dBA, protection factors exceed 10,000, and user comfort is approved. This suit is expected to meet performance requirements for unrestricted use

Z-1 Prototype Space Suit Testing Summary

Science.gov (United States)

Ross, Amy

2013-01-01

The Advanced Space Suit team of the NASA-Johnson Space Center performed a series of test with the Z-1 prototype space suit in 2012. This paper discusses, at a summary level, the tests performed and results from those tests. The purpose of the tests were two-fold: 1) characterize the suit performance so that the data could be used in the downselection of components for the Z-2 Space Suit and 2) develop interfaces with the suitport and exploration vehicles through pressurized suit evaluations. Tests performed included isolated and functional range of motion data capture, Z-1 waist and hip testing, joint torque testing, CO2 washout testing, fit checks and subject familiarizations, an exploration vehicle aft deck and suitport controls interface evaluation, delta pressure suitport tests including pressurized suit don and doff, and gross mobility and suitport ingress and egress demonstrations in reduced gravity. Lessons learned specific to the Z-1 prototype and to suit testing techniques will be presented.

Implementing Sentinels in the TARGIT BI Suite

DEFF Research Database (Denmark)

Middelfart, Morten; Pedersen, Torben Bach

2011-01-01

This paper describes the implementation of socalled sentinels in the TARGIT BI Suite. Sentinels are a novel type of rules that can warn a user if one or more measure changes in a multi-dimensional data cube are expected to cause a change to another measure critical to the user. Sentinels notify u...... pattern mining or correlation techniques. We demonstrate, through extensive experiments, that mining and usage of sentinels is feasible with good performance for the typical users on a real, operational data warehouse....

Canadian Experience in Nuclear Power Technology Transfer

International Nuclear Information System (INIS)

Boulton, J.

1987-01-01

Technology transfer has and will continue to play a major role in the development of nuclear power programs. From the early beginnings of the development of the peaceful uses of nuclear power by just a few nations in the mid-1940s there has been a considerable transfer of technology and today 34 countries have nuclear programs in various stages of development. Indeed, some of the major nuclear vendors achieves their present position through a process of technology transfer and subsequent development. Canada, one of the early leaders in the development of nuclear power, has experience with a wide range of programs bout within its own borders and with other countries. This paper briefly describes this experience and the lessons learned from Canada's involvement in the transfer of nuclear power technology. Nuclear technology is complex and diverse and yet it can be assimilated by a nation given a fire commitment of both suppliers and recipients of technology to achieve success. Canada has reaped large benefits from its nuclear program and we believe this has been instrumentally linked to the sharing of goals and opportunity for participation over extended periods of time by many interests within the Canadian infrastructure. While Canada has accumulated considerable expertise in nuclear technology transfer, we believe there is still much for US to learn. Achieving proficiency in any of the many kinds of nuclear related technologies will place a heavy burden on the financial and human resources of a nation. Care must be taken to plan carefully the total criteria which will assure national benefits in industrial and economic development. Above all, effective transfer of nuclear technology requires a long term commitment by both parties

NGSUtils: a software suite for analyzing and manipulating next-generation sequencing datasets

OpenAIRE

Breese, Marcus R.; Liu, Yunlong

2013-01-01

Summary: NGSUtils is a suite of software tools for manipulating data common to next-generation sequencing experiments, such as FASTQ, BED and BAM format files. These tools provide a stable and modular platform for data management and analysis.

Lecture note on circuit technology for high energy physics experiment

International Nuclear Information System (INIS)

Ikeda, Hirokazu.

1992-07-01

This lecture gives basic ideas and practice of the circuit technology for high energy physics experiment. The program of this lecture gives access to the integrated circuit technology to be applied for a high luminosity hadron collider experiment. (author)

OASYS (OrAnge SYnchrotron Suite): an open-source graphical environment for x-ray virtual experiments

Science.gov (United States)

Rebuffi, Luca; Sanchez del Rio, Manuel

2017-08-01

The evolution of the hardware platforms, the modernization of the software tools, the access to the codes of a large number of young people and the popularization of the open source software for scientific applications drove us to design OASYS (ORange SYnchrotron Suite), a completely new graphical environment for modelling X-ray experiments. The implemented software architecture allows to obtain not only an intuitive and very-easy-to-use graphical interface, but also provides high flexibility and rapidity for interactive simulations, making configuration changes to quickly compare multiple beamline configurations. Its purpose is to integrate in a synergetic way the most powerful calculation engines available. OASYS integrates different simulation strategies via the implementation of adequate simulation tools for X-ray Optics (e.g. ray tracing and wave optics packages). It provides a language to make them to communicate by sending and receiving encapsulated data. Python has been chosen as main programming language, because of its universality and popularity in scientific computing. The software Orange, developed at the University of Ljubljana (SLO), is the high level workflow engine that provides the interaction with the user and communication mechanisms.

Development and Testing of Compression Technologies Using Advanced Materials for Mechanical Counter-Pressure Planetary Exploration Suits

Data.gov (United States)

National Aeronautics and Space Administration — Mechanical counterpressure (MCP) space suits have the potential to greatly improve the mobility of astronauts as they conduct planetary exploration activities. MCP...

Technology adoption subsidies. An experiment with managers

International Nuclear Information System (INIS)

Aalbers, Rob; Van der Heijden, Eline; Potters, Jan; Van Soest, Daan; Vollebergh, Herman

2009-01-01

We evaluate the impact of technology adoption subsidies on investment behavior in an individual choice experiment. In a laboratory setting professional managers are confronted with an intertemporal decision problem in which they have to decide whether or not to search for, and possibly adopt, a new technology. Technologies differ in the per-period benefits they yield, and their purchase price increases with the per-period benefits provided. We introduce a subsidy on the more expensive technologies (that also yield larger per-period benefits), and find that the subsidy scheme induces agents to search for and adopt these more expensive technologies even though the subsidy itself is too small to render these technologies profitable. We speculate that the result is driven by the positive connotation (affect) that the concept 'subsidy' invokes. (author)

Technology adoption subsidies. An experiment with managers

Energy Technology Data Exchange (ETDEWEB)

Aalbers, Rob [Netherlands Bureau for Economic Policy Analysis, P.O. Box 80510, 2508 GM The Hague (Netherlands); Van der Heijden, Eline; Potters, Jan [CentER and Department of Economics, Tilburg University, P.O. Box 90153, 5000 LE Tilburg (Netherlands); Van Soest, Daan [Department of Spatial Economics/IVM, VU University, De Boelelaan 1105, 1081 HV Amsterdam (Netherlands); Vollebergh, Herman [Tinbergen Institute, Erasmus University Rotterdam and Netherlands Environmental Assessment Agency, P.O. Box 303, 3720 AH Bilthoven (Netherlands)

2009-05-15

We evaluate the impact of technology adoption subsidies on investment behavior in an individual choice experiment. In a laboratory setting professional managers are confronted with an intertemporal decision problem in which they have to decide whether or not to search for, and possibly adopt, a new technology. Technologies differ in the per-period benefits they yield, and their purchase price increases with the per-period benefits provided. We introduce a subsidy on the more expensive technologies (that also yield larger per-period benefits), and find that the subsidy scheme induces agents to search for and adopt these more expensive technologies even though the subsidy itself is too small to render these technologies profitable. We speculate that the result is driven by the positive connotation (affect) that the concept 'subsidy' invokes. (author)

Advanced Smart Structures Flight Experiments for Precision Spacecraft

Science.gov (United States)

Denoyer, Keith K.; Erwin, R. Scott; Ninneman, R. Rory

2000-07-01

This paper presents an overview as well as data from four smart structures flight experiments directed by the U.S. Air Force Research Laboratory's Space Vehicles Directorate in Albuquerque, New Mexico. The Middeck Active Control Experiment $¯Flight II (MACE II) is a space shuttle flight experiment designed to investigate modeling and control issues for achieving high precision pointing and vibration control of future spacecraft. The Advanced Controls Technology Experiment (ACTEX-I) is an experiment that has demonstrated active vibration suppression using smart composite structures with embedded piezoelectric sensors and actuators. The Satellite Ultraquiet Isolation Technology Experiment (SUITE) is an isolation platform that uses active piezoelectric actuators as well as damped mechanical flexures to achieve hybrid passive/active isolation. The Vibration Isolation, Suppression, and Steering Experiment (VISS) is another isolation platform that uses viscous dampers in conjunction with electromagnetic voice coil actuators to achieve isolation as well as a steering capability for an infra-red telescope.

The BRITNeY Suite Animation Tool

DEFF Research Database (Denmark)

Westergaard, Michael; Lassen, Kristian Bisgaard

2006-01-01

This paper describes the BRITNeY suite, a tool which enables users to create visualizations of formal models. BRITNeY suite is integrated with CPN Tools, and we give an example of how to extend a simple stop-and-wait protocol with a visualization in the form of message sequence charts. We also sh...... examples of animations created during industrial projects to give an impression of what is possible with the BRITNeY suite....

Enabling interoperability in Geoscience with GI-suite

Science.gov (United States)

Boldrini, Enrico; Papeschi, Fabrizio; Santoro, Mattia; Nativi, Stefano

2015-04-01

GI-suite is a brokering framework targeting interoperability of heterogeneous systems in the Geoscience domain. The framework is composed by different brokers each one focusing on a specific functionality: discovery, access and semantics (i.e. GI-cat, GI-axe, GI-sem). The brokering takes place between a set of heterogeneous publishing services and a set of heterogeneous consumer applications: the brokering target is represented by resources (e.g. coverages, features, or metadata information) required to seamlessly flow from the providers to the consumers. Different international and community standards are now supported by GI-suite, making possible the successful deployment of GI-suite in many international projects and initiatives (such as GEOSS, NSF BCube and several EU funded projects). As for the publisher side more than 40 standards and implementations are supported (e.g. Dublin Core, OAI-PMH, OGC W*S, Geonetwork, THREDDS Data Server, Hyrax Server, etc.). The support for each individual standard is provided by means of specific GI-suite components, called accessors. As for the consumer applications side more than 15 standards and implementations are supported (e.g. ESRI ArcGIS, Openlayers, OGC W*S, OAI-PMH clients, etc.). The support for each individual standard is provided by means of specific profiler components. The GI-suite can be used in different scenarios by different actors: - A data provider having a pre-existent data repository can deploy and configure GI-suite to broker it and making thus available its data resources through different protocols to many different users (e.g. for data discovery and/or data access) - A data consumer can use GI-suite to discover and/or access resources from a variety of publishing services that are already publishing data according to well-known standards. - A community can deploy and configure GI-suite to build a community (or project-specific) broker: GI-suite can broker a set of community related repositories and

Understanding enhanced tourist experiences through technology: a brief approach to the Vilnius case

Directory of Open Access Journals (Sweden)

Ilona Beliatskaya

2017-11-01

Full Text Available The present research investigates the notion of enhanced tourist experiences through technology shedding light on co-creation practices and empowerment of customers. Neuhofer and Buhalis (2013 introduced a novel concept of technology-enhanced tourist experiences by generating a joint comprehension of new era of experiences which conjoin the elements of experiences, co-creation and technology. Being one of rather promoting cities in online environment Vilnius represents an interesting case of successive adoption of smart technologies in order to enhance tourist experiences and facilitate customer empowerment in Vilnius tourism domain. This study aims to determine technology-enhanced tourist experiences in order to measure factors of customer empowerment on the example of international incoming tourists to Vilnius (Lithuania. The mix-methods approach (qualitative online content and functionality analysis and quantitative survey was justified as being the most appropriate for the purpose of this research with intention to find a basis for applying of technology-enhanced tourist experiences in Vilnius tourism marketplace. The paper concludes with the definition of current level of ICTs application to enhance tourist experience co-creation and a discussion of practical implications of technology-enhanced tourist experiences development.

C-arm Cone Beam Computed Tomography: A New Tool in the Interventional Suite.

Science.gov (United States)

Raj, Santhosh; Irani, Farah Gillan; Tay, Kiang Hiong; Tan, Bien Soo

2013-11-01

C-arm Cone Beam CT (CBCT) is a technology that is being integrated into many of the newer angiography systems in the interventional suite. Due to its ability to provide cross sectional imaging, it has opened a myriad of opportunities for creating new clinical applications. We review the technical aspects, current reported clinical applications and potential benefits of this technology. Searches were made via PubMed using the string "CBCT", "Cone Beam CT", "Cone Beam Computed Tomography" and "C-arm Cone Beam Computed Tomography". All relevant articles in the results were reviewed. CBCT clinical applications have been reported in both vascular and non-vascular interventions. They encompass many aspects of a procedure including preprocedural planning, intraprocedural guidance and postprocedural assessment. As a result, they have allowed the interventionalist to be safer and more accurate in performing image guided procedures. There are however several technical limitations. The quality of images produced is not comparable to conventional computed tomography (CT). Radiation doses are also difficult to quantify when compared to CT and fluoroscopy. CBCT technology in the interventional suite has contributed significant benefits to the patient despite its current limitations. It is a tool that will evolve and potentially become an integral part of imaging guidance for intervention.

Exploring Experience of Runners with Sports Tracking Technology

NARCIS (Netherlands)

Kuru, Armagan

2016-01-01

Running has been perceived as an easy way of becoming physically active. Over time, amateur runners start to use technology to keep track of their training and be aware of their improvement. In that sense, this article explores runners’ experience with activity tracking technology. After giving a

Experience Scaling Up Manufacturing of Emerging Photovoltaic Technologies

Energy Technology Data Exchange (ETDEWEB)

Braun, G. W.; Skinner, D. E.

2007-01-01

This report examines two important generic photovoltaic technologies at particularly revealing stages of development, i.e., the stages between R&D and stable commercial production and profitable sales. Based on two historical cases, it attempts to shed light on the difference between: (1) costs and schedules validated by actual manufacturing and market experience, and (2) estimated costs and schedules that rely on technology forecasts and engineering estimates. The amorphous Silicon case also identifies some of the costs that are incurred in meeting specific market requirements, while the Cadmium Telluride case identifies many of the operational challenges involved in transferring R&D results to production. The transition between R&D and commercial success takes a great deal of time and money for emerging energy conversion technologies in general. The experience reported here can be instructive to those managing comparable efforts, and to their investors. It can also be instructive to R&D managers responsible for positioning such new technologies for commercial success.

STS-95 Mission Specialist Pedro Duque suits up for launch

Science.gov (United States)

1998-01-01

STS-95 Mission Specialist Pedro Duque of Spain, with the European Space Agency, is helped with his flight suit by suit tech Tommy McDonald in the Operations and Checkout Building. The final fitting takes place prior to the crew walkout and transport to Launch Pad 39B. Targeted for launch at 2 p.m. EST on Oct. 29, the mission is expected to last 8 days, 21 hours and 49 minutes, and return to KSC at 11:49 a.m. EST on Nov. 7. The STS-95 mission includes research payloads such as the Spartan solar-observing deployable spacecraft, the Hubble Space Telescope Orbital Systems Test Platform, the International Extreme Ultraviolet Hitchhiker, as well as the SPACEHAB single module with experiments on space flight and the aging process.

Attribute Cafe: A Java/COBRA Technology Experiment

National Research Council Canada - National Science Library

Toh, T

1998-01-01

.... The experiment focused on the use of Java and Common Object Request Broker (CORBA) technologies as used in the development of a software visualization demonstrator application (the Attribute Cafe...

Sci-Fri AM: Quality, Safety, and Professional Issues 02: Recent work on TQC Suite and Data from a National survey on Community Uptake

Energy Technology Data Exchange (ETDEWEB)

Malkoske, Kyle; Nielsen, Michelle; Brown, Erika; Diamond, Kevin; Frenière, Normand; Grant, John; Pomerleau-Dalcourt, Natalie; Schella, Jason; Schreiner, L. John; Tantot, Laurent; Barajas, Eduardo Villareal; Sasaki, David; Milette, Marie-Pierre; Bertrand, Marie-Joëlle; Bissonnette, Jean-Pierre [Royal Victoria Hospital (Canada)

2016-08-15

The Canadian Partnership for Quality Radiotherapy (CPQR) and the Canadian Organization of Medical Physicist’s (COMP) Quality Assurance and Radiation Safety Advisory Committee (QARSAC) have worked together in the development of a suite of Technical Quality Control (TQC) Guidelines for radiation treatment equipment and technologies, that outline specific performance objectives and criteria that equipment should meet in order to assure an acceptable level of radiation treatment quality. Early community engagement and uptake survey data showed 70% of Canadian centers are part of this process and that the data in the guideline documents reflect, and are influencing the way Canadian radiation treatment centres run their technical quality control programs. As the TQC development framework matured as a cross-country initiative, guidance documents have been developed in many clinical technologies. Recently, there have been new TQC documents initiated for Gamma Knife and Cyberknife technologies where the entire communities within Canada are involved in the review process. At the same time, QARSAC reviewed the suite as a whole for the first time and it was found that some tests and tolerances overlapped across multiple documents as single tests could pertain to multiple quality control areas. The work to streamline the entire suite has allowed for improved usability of the suite while keeping the integrity of single quality control areas. The suite will be published by the JACMP, in the coming year.

Sci-Fri AM: Quality, Safety, and Professional Issues 02: Recent work on TQC Suite and Data from a National survey on Community Uptake

International Nuclear Information System (INIS)

Malkoske, Kyle; Nielsen, Michelle; Brown, Erika; Diamond, Kevin; Frenière, Normand; Grant, John; Pomerleau-Dalcourt, Natalie; Schella, Jason; Schreiner, L. John; Tantot, Laurent; Barajas, Eduardo Villareal; Sasaki, David; Milette, Marie-Pierre; Bertrand, Marie-Joëlle; Bissonnette, Jean-Pierre

2016-01-01

The Canadian Partnership for Quality Radiotherapy (CPQR) and the Canadian Organization of Medical Physicist’s (COMP) Quality Assurance and Radiation Safety Advisory Committee (QARSAC) have worked together in the development of a suite of Technical Quality Control (TQC) Guidelines for radiation treatment equipment and technologies, that outline specific performance objectives and criteria that equipment should meet in order to assure an acceptable level of radiation treatment quality. Early community engagement and uptake survey data showed 70% of Canadian centers are part of this process and that the data in the guideline documents reflect, and are influencing the way Canadian radiation treatment centres run their technical quality control programs. As the TQC development framework matured as a cross-country initiative, guidance documents have been developed in many clinical technologies. Recently, there have been new TQC documents initiated for Gamma Knife and Cyberknife technologies where the entire communities within Canada are involved in the review process. At the same time, QARSAC reviewed the suite as a whole for the first time and it was found that some tests and tolerances overlapped across multiple documents as single tests could pertain to multiple quality control areas. The work to streamline the entire suite has allowed for improved usability of the suite while keeping the integrity of single quality control areas. The suite will be published by the JACMP, in the coming year.

Technologies for adaptation. Perspectives and practical experiences; Climate change

Energy Technology Data Exchange (ETDEWEB)

Christiansen, Lars; Olhoff, A; Traerup, S

2011-11-15

The present report is the second volume of the UNEP Risoe Centre Technology Transfer Perspectives Series. The report is related to the global Technology Needs Assessment (TNA) project, financed by the Global Environment Facility (GEF) and implemented by UNEP Risoe Centre. The nine articles in this volume discuss issues like: a) the concepts and context of technologies for adaptation; b) assessments of adaptation technology needs; c) practical experiences from working with technologies for adaptation. (LN)

Pakistan's experience in transfer of nuclear technology

International Nuclear Information System (INIS)

Ahmad Khan, Nunir

1977-01-01

Of all technologies, nuclear technology is perhaps the most interdisciplinary in character as it encompasses such varied fields as nuclear physics, reactor physics, mechanical, electrical electronics controls, metallurgical and even civil and geological engineering. When we speak of transfer of acquisition of nuclear technology we imply cumulative know-how in many fields, most of which are not nuclear per se but are essential for building the necessry infrastructure and back-up facilities for developing and implementing any nuclear energy program. In Pakistan, efforts on utilization of nuclear energy for peaceful applications were initiated about twenty years ago. During these years stepwise development of nuclear technology has taken place. The experience gained by Pakistan so far in transfer of nuclear technology is discussed. Suggestions have been made for continuing the transfer of this most essential technology from the advanced to the developing countries while making sure that necessary safeguard requirements are fullfilled

openSE: a Systems Engineering Framework Particularly Suited to Particle Accelerator Studies and Development Projects

Energy Technology Data Exchange (ETDEWEB)

Bonnal, P. [CERN; Féral, B. [CERN; Kershaw, K. [CERN; Nicquevert, B. [CERN; Baudin, M. [Ecole Normale Superieure; Lari, L. [ESS, Lund; Le Cardinal, J. [Chatenay-Malabry, Ecole Centrale

2016-07-15

Particle accelerator projects share many characteristics with industrial projects. However, experience has shown that best practice of industrial project management is not always well suited to particle accelerator projects. Major differences include the number and complexity of technologies involved, the importance of collaborative work, development phases that can last more than a decade, and the importance of telerobotics and remote handling to address future preventive and corrective maintenance requirements due to induced radioactivity, to cite just a few. The openSE framework it is a systems engineering and project management framework specifically designed for scientific facilities’ systems and equipment studies and development projects. Best practices in project management, in systems and requirements engineering, in telerobotics and remote handling and in radiation safety management were used as sources of inspiration, together with analysis of current practices surveyed at CERN, GSI and ESS.

Exploring International Multicultural Field Experiences in Educational Technology

Science.gov (United States)

Wilder, Hilary; Ferris, Sharmila Pixy; An, Heejung

2010-01-01

Purpose: The purpose of this paper is to explore an online field experience between technology facilitator candidates in the USA and K-12 teachers in Namibia, to improve candidates' understanding of diversity and equity issues in the successful incorporation of information and communication technologies (ICT) in teaching and learning.…

ASDA - Advanced Suit Design Analyzer computer program

Science.gov (United States)

Bue, Grant C.; Conger, Bruce C.; Iovine, John V.; Chang, Chi-Min

1992-01-01

An ASDA model developed to evaluate the heat and mass transfer characteristics of advanced pressurized suit design concepts for low pressure or vacuum planetary applications is presented. The model is based on a generalized 3-layer suit that uses the Systems Integrated Numerical Differencing Analyzer '85 in conjunction with a 41-node FORTRAN routine. The latter simulates the transient heat transfer and respiratory processes of a human body in a suited environment. The user options for the suit encompass a liquid cooled garment, a removable jacket, a CO2/H2O permeable layer, and a phase change layer.

Experience with Wolsong-1 Phase-B pre-simulations using WIMS/DRAGON/RFSP-IST code suite

International Nuclear Information System (INIS)

Chung, D-H.; Kim, B-G.; Kim, S-M.; Suh, H-B.; Kim, H-S.; Kim, H-J.

2010-01-01

The Wolsong-1 Phase-B pre-simulations have been carried out with the exclusive use of the code suite WIMS/DRAGON/RFSP-IST in replacement of the previous PPV/MULTICELL/RFSP code system in preparation of tests to be conducted as scheduled in December 2010 after the refurbishment. A comprehensive simulation package has been undertaken starting from the approach to first criticality to the flux measurements and scan. In order to secure the validity of the results, the simulations are performed using both the Uniform and SCM fuel tables. An elaborating contribution has been invested into the work in view of the inexperience of using WIMS/SCM fuel tables as well as incremental cross sections generated by using DRAGON-IST. The overall assessment of simulation results indicates that the newly adopted WIMS/DRAGON/RFSP-IST code suite could be used in replacement of PPV/MULTICELL/RFSP for the verification against the Phase-B test results. (author)

Asteroid Redirect Crewed Mission Space Suit and EVA System Architecture Trade Study

Science.gov (United States)

Blanco, Raul A.; Bowie, Jonathan T.; Watson, Richard D.; Sipila, Stephanie A.

2014-01-01

The Asteroid Redirect Crewed Mission (ARCM) requires a Launch/Entry/Abort (LEA) suit capability and short duration Extra Vehicular Activity (EVA) capability for Orion. The EVAs will involve a two-person crew for approximately four hours. Currently, two EVAs are planned with one contingency EVA in reserve. Providing this EVA capability is very challenging due to system level constraints and a new and unknown environment. The goal of the EVA architecture for ARCM is one that builds upon previously developed technologies and lessons learned, and that accomplishes the ARCM mission while providing a stepping stone to future missions and destinations. The primary system level constraints are to 1) minimize system mass and volume and 2) minimize the interfacing impacts to the baseline Orion design. In order to minimize the interfacing impacts and to not perturb the baseline Orion schedule, the concept of adding "kits" to the baseline system is proposed. These kits consist of: an EVA kit (converts LEA suit to EVA suit), EVA Servicing and Recharge Kit (provides suit consumables), the EVA Tools, Translation Aids & Sample Container Kit (the tools and mobility aids to complete the tasks), the EVA Communications Kit (interface between the EVA radio and the MPCV), and the Cabin Repress Kit (represses the MPCV between EVAs). This paper will focus on the trade space, analysis, and testing regarding the space suit (pressure garment and life support system). Historical approaches and lessons learned from all past EVA operations were researched. Previous and current, successfully operated EVA hardware and high technology readiness level (TRL) hardware were evaluated, and a trade study was conducted for all possible pressure garment and life support options. Testing and analysis was conducted and a recommended EVA system architecture was proposed. Pressure garment options that were considered for this mission include the currently in-use ISS EVA Mobility Unit (EMU), all variations of

Morphing: A Novel Approach to Astronaut Suit Sizing

Science.gov (United States)

Margerum, Sarah; Clowers, Kurt; Rajulu, Sudhakar

2006-01-01

The fitting of a spacesuit to an astronaut is an iterative process consisting of two parts. The first uses anthropometric data to provide an approximation of the suit components that will fit the astronaut. The second part is the subjective fitting, where small adjustments are made based on the astronaut s preference. By providing a better approximation of the correct suit components, the entire fit process time can be reduced significantly. The goals of this project are twofold: (1) To evaluate the effectiveness of the existing sizing algorithm for the Mark III Hybrid suit and (2) to determine what additional components are needed in order to provide adequate sizing for the existing astronaut population. A single subject was scanned using a 3D whole-body scanner (VITUS 3D) in the Mark III suit in eight different poses and four subjects in minimal clothing were also scanned in similar poses. The 3D external body scans of the suit and the subject are overlaid and visually aligned in a customized MATLAB program. The suit components were contracted or expanded linearly along the subjects limbs to match the subjects segmental lengths. Two independent measures were obtained from the morphing program on four subjects and compared with the existing sizing information. Two of the four subjects were in correspondence with the sizing algorithm and morphing results. The morphing outcome for a third subject, incompatible with the suit, suggested that an additional arm element at least 6 inches smaller than the existing smallest suit component would need to be acquired. The morphing result of the fourth subject, deemed incompatible with the suit using the sizing algorithm, indicated a different suit configuration which would be compatible. This configuration matched with the existing suit fit check data.

Data processing software suite SITENNO for coherent X-ray diffraction imaging using the X-ray free-electron laser SACLA

International Nuclear Information System (INIS)

Sekiguchi, Yuki; Oroguchi, Tomotaka; Takayama, Yuki; Nakasako, Masayoshi

2014-01-01

The software suite SITENNO is developed for processing diffraction data collected in coherent X-ray diffraction imaging experiments of non-crystalline particles using an X-ray free-electron laser. Coherent X-ray diffraction imaging is a promising technique for visualizing the structures of non-crystalline particles with dimensions of micrometers to sub-micrometers. Recently, X-ray free-electron laser sources have enabled efficient experiments in the ‘diffraction before destruction’ scheme. Diffraction experiments have been conducted at SPring-8 Angstrom Compact free-electron LAser (SACLA) using the custom-made diffraction apparatus KOTOBUKI-1 and two multiport CCD detectors. In the experiments, ten thousands of single-shot diffraction patterns can be collected within several hours. Then, diffraction patterns with significant levels of intensity suitable for structural analysis must be found, direct-beam positions in diffraction patterns determined, diffraction patterns from the two CCD detectors merged, and phase-retrieval calculations for structural analyses performed. A software suite named SITENNO has been developed to semi-automatically apply the four-step processing to a huge number of diffraction data. Here, details of the algorithm used in the suite are described and the performance for approximately 9000 diffraction patterns collected from cuboid-shaped copper oxide particles reported. Using the SITENNO suite, it is possible to conduct experiments with data processing immediately after the data collection, and to characterize the size distribution and internal structures of the non-crystalline particles

Forward Technology Solar Cell Experiment First On-Orbit Data

Science.gov (United States)

Walters, R. J.; Garner, J. C.; Lam, S. N.; Vazquez, J. A.; Braun, W. R.; Ruth, R. E.; Warner, J. H.; Lorentzen, J. R.; Messenger, S. R.; Bruninga, R.;

Hollow Fiber Space Suit Water Membrane Evaporator Development for Lunar Missions

Science.gov (United States)

Bue, Grant C.; Trevino, Luis A.; Hanford, Anthony J.; Mitchell, Keith

2009-01-01

The Space Suit Water Membrane Evaporator (SWME) is the baseline heat rejection technology selected for development for the Constellation lunar suit. The Hollow Fiber (HoFi) SWME is being considered for service in the Constellation Space Suit Element (CSSE) Portable Life Support Subsystem (PLSS) to provide cooling to the thermal loop through water evaporation to the vacuum of space. Previous work described the test methodology and planning to compare the test performance of three commercially available hollow fiber materials as alternatives to the sheet membrane prototype for SWME: 1) porous hydrophobic polypropylene, 2) porous hydrophobic polysulfone, and 3) ion exchange through nonporous hydrophilic modified Nafion. Contamination tests were performed to probe for sensitivities of the candidate SWME elements to organics and non-volative inorganics expected to be found in the target feedwater source, i.e., potable water provided by the vehicle. The resulting presence of precipitate in the coolant water could plug pores and tube channels and affect the SWME performance. From this prior work, a commercial porous hydrophobic hollow fiber was selected to satisfy both the sensitivity question and the need to provide 800 W of heat rejection. This paper describes the trade studies, the design methodology, and the hollow fiber test data used to design a full

Enhancing the Gaming Experience Using 3D Spatial User Interface Technologies.

Science.gov (United States)

Kulshreshth, Arun; Pfeil, Kevin; LaViola, Joseph J

2017-01-01

Three-dimensional (3D) spatial user interface technologies have the potential to make games more immersive and engaging and thus provide a better user experience. Although technologies such as stereoscopic 3D display, head tracking, and gesture-based control are available for games, it is still unclear how their use affects gameplay and if there are any user performance benefits. The authors have conducted several experiments on these technologies in game environments to understand how they affect gameplay and how we can use them to optimize the gameplay experience.

Analytical Tools for Space Suit Design

Science.gov (United States)

Aitchison, Lindsay

2011-01-01

As indicated by the implementation of multiple small project teams within the agency, NASA is adopting a lean approach to hardware development that emphasizes quick product realization and rapid response to shifting program and agency goals. Over the past two decades, space suit design has been evolutionary in approach with emphasis on building prototypes then testing with the largest practical range of subjects possible. The results of these efforts show continuous improvement but make scaled design and performance predictions almost impossible with limited budgets and little time. Thus, in an effort to start changing the way NASA approaches space suit design and analysis, the Advanced Space Suit group has initiated the development of an integrated design and analysis tool. It is a multi-year-if not decadal-development effort that, when fully implemented, is envisioned to generate analysis of any given space suit architecture or, conversely, predictions of ideal space suit architectures given specific mission parameters. The master tool will exchange information to and from a set of five sub-tool groups in order to generate the desired output. The basic functions of each sub-tool group, the initial relationships between the sub-tools, and a comparison to state of the art software and tools are discussed.

The role of geo-based technology in place experiences

DEFF Research Database (Denmark)

Tussyadiah, Iis; Zach, F.J.

2012-01-01

Today, as various context-aware technologies have become increasingly ubiquitous, tourists have access to retrieve voluminous geographic information about tourism destinations. These technologies are suggested to aid tourists in gaining meaningful experiences with places. This study identifies ho...

Suited Contingency Ops Food - 2

Science.gov (United States)

Glass, J. W.; Leong, M. L.; Douglas, G. L.

2014-01-01

The contingency scenario for an emergency cabin depressurization event may require crewmembers to subsist in a pressurized suit for up to 144 hours. This scenario requires the capability for safe nutrition delivery through a helmet feed port against a 4 psi pressure differential to enable crewmembers to maintain strength and cognition to perform critical tasks. Two nutritional delivery prototypes were developed and analyzed for compatibility with the helmet feed port interface and for operational effectiveness against the pressure differential. The bag-in-bag (BiB) prototype, designed to equalize the suit pressure with the beverage pouch and enable a crewmember to drink normally, delivered water successfully to three different subjects in suits pressurized to 4 psi. The Boa restrainer pouch, designed to provide mechanical leverage to overcome the pressure differential, did not operate sufficiently. Guidelines were developed and compiled for contingency beverages that provide macro-nutritional requirements, a minimum one-year shelf life, and compatibility with the delivery hardware. Evaluation results and food product parameters have the potential to be used to improve future prototype designs and develop complete nutritional beverages for contingency events. These feeding capabilities would have additional use on extended surface mission EVAs, where the current in-suit drinking device may be insufficient.

Improvements to the APBS biomolecular solvation software suite: Improvements to the APBS Software Suite

Energy Technology Data Exchange (ETDEWEB)

Jurrus, Elizabeth [Pacific Northwest National Laboratory, Richland Washington; Engel, Dave [Pacific Northwest National Laboratory, Richland Washington; Star, Keith [Pacific Northwest National Laboratory, Richland Washington; Monson, Kyle [Pacific Northwest National Laboratory, Richland Washington; Brandi, Juan [Pacific Northwest National Laboratory, Richland Washington; Felberg, Lisa E. [University of California, Berkeley California; Brookes, David H. [University of California, Berkeley California; Wilson, Leighton [University of Michigan, Ann Arbor Michigan; Chen, Jiahui [Southern Methodist University, Dallas Texas; Liles, Karina [Pacific Northwest National Laboratory, Richland Washington; Chun, Minju [Pacific Northwest National Laboratory, Richland Washington; Li, Peter [Pacific Northwest National Laboratory, Richland Washington; Gohara, David W. [St. Louis University, St. Louis Missouri; Dolinsky, Todd [FoodLogiQ, Durham North Carolina; Konecny, Robert [University of California San Diego, San Diego California; Koes, David R. [University of Pittsburgh, Pittsburgh Pennsylvania; Nielsen, Jens Erik [Protein Engineering, Novozymes A/S, Copenhagen Denmark; Head-Gordon, Teresa [University of California, Berkeley California; Geng, Weihua [Southern Methodist University, Dallas Texas; Krasny, Robert [University of Michigan, Ann Arbor Michigan; Wei, Guo-Wei [Michigan State University, East Lansing Michigan; Holst, Michael J. [University of California San Diego, San Diego California; McCammon, J. Andrew [University of California San Diego, San Diego California; Baker, Nathan A. [Pacific Northwest National Laboratory, Richland Washington; Brown University, Providence Rhode Island

2017-10-24

The Adaptive Poisson-Boltzmann Solver (APBS) software was developed to solve the equations of continuum electrostatics for large biomolecular assemblages that has provided impact in the study of a broad range of chemical, biological, and biomedical applications. APBS addresses three key technology challenges for understanding solvation and electrostatics in biomedical applications: accurate and efficient models for biomolecular solvation and electrostatics, robust and scalable software for applying those theories to biomolecular systems, and mechanisms for sharing and analyzing biomolecular electrostatics data in the scientific community. To address new research applications and advancing computational capabilities, we have continually updated APBS and its suite of accompanying software since its release in 2001. In this manuscript, we discuss the models and capabilities that have recently been implemented within the APBS software package including: a Poisson-Boltzmann analytical and a semi-analytical solver, an optimized boundary element solver, a geometry-based geometric flow solvation model, a graph theory based algorithm for determining pKa values, and an improved web-based visualization tool for viewing electrostatics.

Experiences of technology integration in home care nursing.

Science.gov (United States)

Johnson, K A; Valdez, R S; Casper, G R; Kossman, S P; Carayon, P; Or, C K L; Burke, L J; Brennan, P F

2008-11-06

The infusion of health care technologies into the home leads to substantial changes in the nature of work for home care nurses and their patients. Nurses and nursing practice must change to capitalize on these innovations. As part of a randomized field experiment evaluating web-based support for home care of patients with chronic heart disease, we engaged nine nurses in a dialogue about their experience integrating this modification of care delivery into their practice. They shared their perceptions of the work they needed to do and their perceptions and expectations for patients and themselves in using technologies to promote and manage self-care. We document three overarching themes that identify preexisting factors that influenced integration or represent the consequences of technology integration into home care: doing tasks differently, making accommodations in the home for devices and computers, and being mindful of existing expectations and skills of both nurses and patients.

An educational laboratory virtual instrumentation suite assisted experiment for studying fundamentals of series resistance-inductance-capacitance circuit

Science.gov (United States)

Rana, K. P. S.; Kumar, Vineet; Mendiratta, Jatin

2017-11-01

One of the most elementary concepts in freshmen Electrical Engineering subject comprises the Resistance-Inductance-Capacitance (RLC) circuit fundamentals, that is, their time and frequency domain responses. For a beginner, generally, it is difficult to understand and appreciate the step and the frequency responses, particularly the resonance. This paper proposes a student-friendly teaching and learning approach by inculcating the multifaceted versatile software LabVIEWTM along with the educational laboratory virtual instrumentation suite hardware, for studying the RLC circuit time and frequency domain responses. The proposed approach has offered an interactive laboratory experiment where students can model circuits in simulation and hardware circuits on prototype board, and then compare their performances. The theoretical simulations and the obtained experimental data are found to be in very close agreement, thereby enhancing the conviction of students. Finally, the proposed methodology was also subjected to the assessment of learning outcomes based on student feedback, and an average score of 8.05 out of 10 with a standard deviation of 0.471 was received, indicating the overall satisfaction of the students.

Second NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box (TTB)

Science.gov (United States)

ONeil, D. A.; Mankins, J. C.; Christensen, C. B.; Gresham, E. C.

2005-01-01

The Advanced Technology Lifecycle Analysis System (ATLAS), a spreadsheet analysis tool suite, applies parametric equations for sizing and lifecycle cost estimation. Performance, operation, and programmatic data used by the equations come from a Technology Tool Box (TTB) database. In this second TTB Technical Interchange Meeting (TIM), technologists, system model developers, and architecture analysts discussed methods for modeling technology decisions in spreadsheet models, identified specific technology parameters, and defined detailed development requirements. This Conference Publication captures the consensus of the discussions and provides narrative explanations of the tool suite, the database, and applications of ATLAS within NASA s changing environment.

Concept definition for space station technology development experiments. Experiment definition, task 2

Science.gov (United States)

1986-01-01

The second task of a study with the overall objective of providing a conceptual definition of the Technology Development Mission Experiments proposed by LaRC on space station is discussed. During this task, the information (goals, objectives, and experiment functional description) assembled on a previous task was translated into the actual experiment definition. Although still of a preliminary nature, aspects such as: environment, sensors, data acquisition, communications, handling, control telemetry requirements, crew activities, etc., were addressed. Sketches, diagrams, block diagrams, and timeline analyses of crew activities are included where appropriate.

76 FR 4137 - Comment Request: Innovative Technology Experiences for Students and Teachers (ITEST) Program

Science.gov (United States)

2011-01-24

... NATIONAL SCIENCE FOUNDATION Comment Request: Innovative Technology Experiences for Students and... Friday. SUPPLEMENTARY INFORMATION: Title of Collection: Innovative Technology Experiences for Students... Technology Experiences for Students and Teachers (ITEST) is a National Science Foundation program that...

A suite of benchmark and challenge problems for enhanced geothermal systems

Energy Technology Data Exchange (ETDEWEB)

White, Mark; Fu, Pengcheng; McClure, Mark; Danko, George; Elsworth, Derek; Sonnenthal, Eric; Kelkar, Sharad; Podgorney, Robert

2017-11-06

A diverse suite of numerical simulators is currently being applied to predict or understand the performance of enhanced geothermal systems (EGS). To build confidence and identify critical development needs for these analytical tools, the United States Department of Energy, Geothermal Technologies Office sponsored a Code Comparison Study (GTO-CCS), with participants from universities, industry, and national laboratories. A principal objective for the study was to create a community forum for improvement and verification of numerical simulators for EGS modeling. Teams participating in the study were those representing U.S. national laboratories, universities, and industries, and each team brought unique numerical simulation capabilities to bear on the problems. Two classes of problems were developed during the study, benchmark problems and challenge problems. The benchmark problems were structured to test the ability of the collection of numerical simulators to solve various combinations of coupled thermal, hydrologic, geomechanical, and geochemical processes. This class of problems was strictly defined in terms of properties, driving forces, initial conditions, and boundary conditions. The challenge problems were based on the enhanced geothermal systems research conducted at Fenton Hill, near Los Alamos, New Mexico, between 1974 and 1995. The problems involved two phases of research, stimulation, development, and circulation in two separate reservoirs. The challenge problems had specific questions to be answered via numerical simulation in three topical areas: 1) reservoir creation/stimulation, 2) reactive and passive transport, and 3) thermal recovery. Whereas the benchmark class of problems were designed to test capabilities for modeling coupled processes under strictly specified conditions, the stated objective for the challenge class of problems was to demonstrate what new understanding of the Fenton Hill experiments could be realized via the application of

77 FR 22359 - Innovative Technology Experiences for Students and Teachers (ITEST) Program; Comment Request

Science.gov (United States)

2012-04-13

... NATIONAL SCIENCE FOUNDATION Innovative Technology Experiences for Students and Teachers (ITEST.... SUPPLEMENTARY INFORMATION: Title of Collection: Innovative Technology Experiences for Students and Teachers... opportunities for students and teachers to learn about, experience, and use information technologies within the...

Comprehensive understandings of energy confinement in LHD plasmas through extensive application of the integrated transport analysis suite

International Nuclear Information System (INIS)

Yokoyama, M.; Seki, R.; Suzuki, C.; Ida, K.; Osakabe, M.; Satake, S.; Yamada, H.; Murakami, S.

2014-10-01

The integrated transport analysis suite, TASK3D-a, has enhanced energy transport analyses in LHD. It has clearly elucidated (1) the systematic dependence of ion and electron energy confinement on wide variation of plasma parameters, and (2) statistically-derived fitting expressions for the ion and electron heat diffusivities (χ i and χ e ), separately, taking also those radial-profile information into account. In particular, the latter approach can outstrip the conventional scaling laws for the global confinement time (τ E ) in terms of its considerations on profiles (temperature, density, heating depositions etc.). This has been made possible with the analysis database accumulated by the extensive application of the integrated transport analysis suite to experiment data. In this proceeding, TASK3D-a analysis-database for high-ion-temperature (high-T i ) plasmas in LHD (Large Helical Device) are exemplified. This approach should be applicable to any other combinations of integrated transport analysis suites and fusion experiments. (author)

Metabolic Diet App Suite for inborn errors of amino acid metabolism.

Science.gov (United States)

Ho, Gloria; Ueda, Keiko; Houben, Roderick F A; Joa, Jeff; Giezen, Alette; Cheng, Barbara; van Karnebeek, Clara D M

2016-03-01

An increasing number of rare inborn errors of metabolism (IEMs) are amenable to targeted metabolic nutrition therapy. Daily adherence is important to attain metabolic control and prevent organ damage. This is challenging however, given the lack of information of disorder specific nutrient content of foods, the limited availability and cost of specialty products as well as difficulties in reliable calculation and tracking of dietary intake and targets. To develop apps for all inborn errors of amino acid metabolism for which the mainstay of treatment is a medical diet, and obtain patient and family feedback throughout the process to incorporate this into subsequent versions. The Metabolic Diet App Suite was created with input from health care professionals as a free, user-friendly, online tool for both mobile devices and desktop computers (http://www.metabolicdietapp.org) for 15 different IEMs. General information is provided for each IEM with links to useful online resources. Nutrient information is based on the MetabolicPro™, a North American food database compiled by the Genetic Metabolic Dietitians International (GMDI) Technology committee. After user registration, a personalized dashboard and management plan including specific nutrient goals are created. Each Diet App has a user-friendly interface and the functions include: nutrient intake counts, adding your own foods and homemade recipes and, managing a daily food diary. Patient and family feedback was overall positive and specific suggestions were used to further improve the App Suite. The Metabolic Diet App Suite aids individuals affected by IEMs to track and plan their meals. Future research should evaluate its impact on patient adherence, metabolic control, quality of life and health-related outcomes. The Suite will be updated and expanded to Apps for other categories of IEMs. Finally, this Suite is a support tool only, and does not replace medical/metabolic nutrition professional advice. Copyright �

[Antigravity suit used for neurosurgical operations in sitting position].

Science.gov (United States)

Szpiro-Zurkowska, A; Milczarek, Z; Marchel, A; Jagielski, J

1996-01-01

The aviator's antigravity suit (G-suit) was used for 40 operations on neurosurgical patients operated on in sitting position. The G-suit was filled with air to 0.2 atmosphere (20 kPa) pressure in 26 cases, and 0.3 atm. (30 kPa) in 14 cases. In all cases G-suit filling was followed by central venous pressure rise and mean arterial pressure rise. Venous air embolism was found in 5 (12.5%) patients. No other complications connected with the use of G-suit were observed.

Challenges Encountered in Creating Personalised Learning Activities to Suit Students Learning Preferences

OpenAIRE

O'Donnell, Eileen; Wade, Vincent; Sharp, Mary; O'Donnell, Liam

2013-01-01

This book chapter reviews some of the challenges encountered by educators in creating personalised e-learning activities to suit students learning preferences. Technology-enhanced learning (TEL) alternatively known as e-learning has not yet reached its full potential in higher education. There are still many potential uses as yet undiscovered and other discovered uses which are not yet realisable by many educators. TEL is still predominantly used for e-dissemination and e-administration. This...

The plasma focus - numerical experiments leading technology

International Nuclear Information System (INIS)

Saw, S.H.; Lee, S.

2013-01-01

Numerical experiments on the plasma focus are now used routinely to assist design and provide reference points for diagnostics. More importantly guidance has been given regarding the implementation of technology for new generations of plasma focus devices. For example intensive series of experiments have shown that it is of no use to reduce static bank inductance L0 below certain values because of the consistent loading effects of the plasma focus dynamics on the capacitor bank. Thus whilst it was thought that the PF1000 could receive major benefits by reducing its bank inductance L 0 , numerical experiments have shown to the contrary that its present L 0 of 30 nH is already optimum and that reducing L 0 would be a very expensive fruitless exercise. This knowledge gained from numerical experiments now acts as a general valuable guideline to all high performance (ie low inductance) plasma focus devices not to unnecessarily attempt to further lower the static inductance L 0 . The numerical experiments also show that the deterioration of the yield scaling law (e.g. the fusion neutron yield scaling with storage energy) is inevitable again due to the consistent loading effect of the plasma focus, which becomes more and more dominant as capacitor bank impedance reduces with increasing capacitance C 0 as storage energy is increased. This line of thinking has led to the suggestion of using higher voltages (as an alternative to increasing C 0 ) and to seeding of Deuterium with noble gases in order to enhance compression through thermodynamic mechanisms and through radiation cooling effects of strong line radiation. Circuit manipulation e.g. to enhance focus pinch compression by current-stepping is also being numerically experimented upon. Ultimately however systems have to be built, guided by numerical experiments, so that the predicted technology may be proven and realized. (author)

NASA Research Announcement Phase 1 Report and Phase 2 Proposal for the Development of a Power Assisted Space Suit Glove Assembly

Science.gov (United States)

Cadogan, Dave; Lingo, Bob

1996-01-01

In July of 1996, ILC Dover was awarded Phase 1 of a contract for NASA to develop a prototype Power Assisted Space Suit glove to enhance the performance of astronauts during Extra-Vehicular Activity (EVA). This report summarizes the work performed to date on Phase 1, and details the work to be conducted on Phase 2 of the program. Phase 1 of the program consisted of research and review of related technical sources, concept brainstorming, baseline design development, modeling and analysis, component mock-up testing, and test data analysis. ILC worked in conjunction with the University of Maryland's Space Systems Laboratory (SSL) to develop the power assisted glove. Phase 2 activities will focus on the design maturation and the manufacture of a working prototype system. The prototype will be tested and evaluated in conjunction with existing space suit glove technology to determine the performance enhancement anticipated with the implementation of the power assisted joint technology in space suit gloves.

Safety in the use of pressurized suits

International Nuclear Information System (INIS)

1984-01-01

This Code of Practice describes the procedures relating to the safe operation of Pressurized Suit Areas and their supporting services. It is directed at personnel responsible for the design and/or operation of Pressurized Suit Areas. (author)

Experiments for WAAM Technologies

Directory of Open Access Journals (Sweden)

Ghenghea Laurentiu Dan

2017-01-01

Full Text Available The most recent group of technologies added to Additive Manufacturing (AM field, Wire and Arc Additive Manufacturing (WAAM use some well known welding processes, generally gas metal arc welding (GMAW codification at American Welding Society and 135 at International Institute of Welding/Institute International de Soudure or Tungsten Inert Gas to manufacture products used in top ranged production field like aeronautics. Remarkable results in this new method for industrial production have been achieved by research groups from Cranfield, Delft and many other universities around the world and were published in prestigious research journals. Together with our students from Welding Engineering Program and our limited resources for powerful researches an approach to these new working technologies have been done and our main objective was to show that strong researches could be done with more resources during masters or doctoral studies. In this proposed paper some experiments with shielded metal arc welding process will be presented which have been done to investigate what are the internal structure of welded products made when bead over bead have been deposed, also will be presented some hardness tests of manufactured structure and machining tests for milling process.

Development of an advanced rocket propellant handler's suit

Science.gov (United States)

Doerr, D. F.

2001-01-01

Most launch vehicles and satellites in the US inventory rely upon the use of hypergolic rocket propellants, many of which are toxic to humans. These fuels and oxidizers, such as hydrazine and nitrogen tetroxide have threshold limit values as low as 0.01 PPM. It is essential to provide space workers handling these agents whole body protection as they are universally hazardous not only to the respiratory system, but the skin as well. This paper describes a new method for powering a whole body protective garment to assure the safety of ground servicing crews. A new technology has been developed through the small business innovative research program at the Kennedy Space Center. Currently, liquid air is used in the environmental control unit (ECU) that powers the propellant handlers suit (PHE). However, liquid air exhibits problems with attitude dependence, oxygen enrichment, and difficulty with reliable quantity measurement. The new technology employs the storage of the supply air as a supercritical gas. This method of air storage overcomes all of three problems above while maintaining high density storage at relatively low vessel pressures (rights reserved.

Suites of dwarfs around Nearby giant galaxies

International Nuclear Information System (INIS)

Karachentsev, Igor D.; Kaisina, Elena I.; Makarov, Dmitry I.

2014-01-01

The Updated Nearby Galaxy Catalog (UNGC) contains the most comprehensive summary of distances, radial velocities, and luminosities for 800 galaxies located within 11 Mpc from us. The high density of observables in the UNGC makes this sample indispensable for checking results of N-body simulations of cosmic structures on a ∼1 Mpc scale. The environment of each galaxy in the UNGC was characterized by a tidal index Θ 1 , depending on the separation and mass of the galaxy's main disturber (MD). We grouped UNGC galaxies with a common MD in suites, and ranked suite members according to their Θ 1 . All suite members with positive Θ 1 are assumed to be physical companions of the MD. About 58% of the sample are members of physical groups. The distribution of suites by the number of members, n, follows a relation N(n) ∼ n –2 . The 20 most populated suites contain 468 galaxies, i.e., 59% of the UNGC sample. The fraction of MDs among the brightest galaxies is almost 100% and drops to 50% at M B = –18 m . We discuss various properties of MDs, as well as galaxies belonging to their suites. The suite abundance practically does not depend on the morphological type, linear diameter, or hydrogen mass of the MD, the tightest correlation being with the MD dynamical mass. Dwarf galaxies around MDs exhibit well-known segregation effects: the population of the outskirts has later morphological types, richer H I contents, and higher rates of star formation activity. Nevertheless, there are some intriguing cases where dwarf spheroidal galaxies occur at the far periphery of the suites, as well as some late-type dwarfs residing close to MDs. Comparing simulation results with galaxy groups, most studies assume the Local Group is fairly typical. However, we recognize that the nearby groups significantly differ from each other and there is considerable variation in their properties. The suites of companions around the Milky Way and M31, consisting of the Local Group, do not

Data analysis and graphing in an introductory physics laboratory: spreadsheet versus statistics suite

International Nuclear Information System (INIS)

Peterlin, Primoz

2010-01-01

Two methods of data analysis are compared: spreadsheet software and a statistics software suite. Their use is compared analysing data collected in three selected experiments taken from an introductory physics laboratory, which include a linear dependence, a nonlinear dependence and a histogram. The merits of each method are compared.

Space Suit Joint Torque Measurement Method Validation

Science.gov (United States)

Valish, Dana; Eversley, Karina

2012-01-01

In 2009 and early 2010, a test method was developed and performed to quantify the torque required to manipulate joints in several existing operational and prototype space suits. This was done in an effort to develop joint torque requirements appropriate for a new Constellation Program space suit system. The same test method was levied on the Constellation space suit contractors to verify that their suit design met the requirements. However, because the original test was set up and conducted by a single test operator there was some question as to whether this method was repeatable enough to be considered a standard verification method for Constellation or other future development programs. In order to validate the method itself, a representative subset of the previous test was repeated, using the same information that would be available to space suit contractors, but set up and conducted by someone not familiar with the previous test. The resultant data was compared using graphical and statistical analysis; the results indicated a significant variance in values reported for a subset of the re-tested joints. Potential variables that could have affected the data were identified and a third round of testing was conducted in an attempt to eliminate and/or quantify the effects of these variables. The results of the third test effort will be used to determine whether or not the proposed joint torque methodology can be applied to future space suit development contracts.

A Phenomenological Study: Experiences of Chinese Students Using Educational Technology in American Universities

Science.gov (United States)

Jiang, Ying

2017-01-01

This phenomenological study explores the educational technology experiences of ten Chinese international students at American universities. It describes their technology experiences and the influence on their technology self-efficacy and acculturation to the university culture in America. Seidman's (1998) three-interview approach was employed to…

Tier-3 Monitoring Software Suite (T3MON) proposal

CERN Document Server

Andreeva, J; The ATLAS collaboration; Klimentov, A; Korenkov, V; Oleynik, D; Panitkin, S; Petrosyan, A

2011-01-01

The ATLAS Distributed Computing activities concentrated so far in the “central” part of the computing system of the experiment, namely the first 3 tiers (CERN Tier0, the 10 Tier1s centres and the 60+ Tier2s). This is a coherent system to perform data processing and management on a global scale and host (re)processing, simulation activities down to group and user analysis. Many ATLAS Institutes and National Communities built (or have plans to build) Tier-3 facilities. The definition of Tier-3 concept has been outlined (REFERENCE). Tier-3 centres consist of non-pledged resources mostly dedicated for the data analysis by the geographically close or local scientific groups. Tier-3 sites comprise a range of architectures and many do not possess Grid middleware, which would render application of Tier-2 monitoring systems useless. This document describes a strategy to develop a software suite for monitoring of the Tier3 sites. This software suite will enable local monitoring of the Tier3 sites and the global vie...

Sibelius. Karelia Suite, Op. 11 / Robert Layton

Index Scriptorium Estoniae

Layton, Robert

1996-01-01

Uuest heliplaadist "Sibelius. Karelia Suite, Op. 11. Luonnotar, Op. 70 a. Andante festivo. The Oceanides, Op. 73. King Christian II, Op. 27-Suite. Finlandia, Op. 26a. Gothenburg Symphony Orchester, Neeme Järvi" DG 447 760-2GH (72 minutes: DDD)

Correction factors for assessing immersion suits under harsh conditions.

Science.gov (United States)

Power, Jonathan; Tikuisis, Peter; Ré, António Simões; Barwood, Martin; Tipton, Michael

2016-03-01

Many immersion suit standards require testing of thermal protective properties in calm, circulating water while these suits are typically used in harsher environments where they often underperform. Yet it can be expensive and logistically challenging to test immersion suits in realistic conditions. The goal of this work was to develop a set of correction factors that would allow suits to be tested in calm water yet ensure they will offer sufficient protection in harsher conditions. Two immersion studies, one dry and the other with 500 mL of water within the suit, were conducted in wind and waves to measure the change in suit insulation. In both studies, wind and waves resulted in a significantly lower immersed insulation value compared to calm water. The minimum required thermal insulation for maintaining heat balance can be calculated for a given mean skin temperature, metabolic heat production, and water temperature. Combining the physiological limits of sustainable cold water immersion and actual suit insulation, correction factors can be deduced for harsh conditions compared to calm. The minimum in-situ suit insulation to maintain thermal balance is 1.553-0.0624·TW + 0.00018·TW(2) for a dry calm condition. Multiplicative correction factors to the above equation are 1.37, 1.25, and 1.72 for wind + waves, 500 mL suit wetness, and both combined, respectively. Calm water certification tests of suit insulation should meet or exceed the minimum in-situ requirements to maintain thermal balance, and correction factors should be applied for a more realistic determination of minimum insulation for harsh conditions. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

Tunable solid-state laser technology for applications to scientific and technological experiments from space

Science.gov (United States)

Allario, F.; Taylor, L. V.

1986-01-01

Current plans for the Earth Observing System (EOS) include development of a lidar facility to conduct scientific experiments from a polar orbiting platforms. A recommended set of experiments were scoped, which includes techniques of atmospheric backscatter (Lidar), Differential Absorption Lidar (DIAL), altimetry, and retroranging. Preliminary assessments of the resources (power, weight, volume) required by the Eos Lidar Facility were conducted. A research program in tunable solid state laser technology was developed, which includes laser materials development, modeling and experiments on the physics of solid state laser materials, and development of solid state laser transmitters with a strong focus on Eos scientific investigations. Some of the system studies that were conducted which highlight the payoff of solid state laser technology for the Eos scientific investigations will be discussed. Additionally, a summary of some promising research results which have recently emerged from the research program will be presented.

TEACHING IN ONLINE COURSES: Experiences of Instructional Technology Faculty Members

Directory of Open Access Journals (Sweden)

Omur AKDEMIR

2008-04-01

Full Text Available The Internet and computer technology have altered the education landscape. Online courses are offered throughout the world. Learning about the experiences of faculty members is important to guide practitioners and administrators. Using qualitative research methodology, this study investigated the experiences of faculty members teaching online courses. A convenience sampling was used to select the instructional technology faculty members to investigate their experiences in online courses. Semi-structured interviews with faculty members teaching online courses were used as the primary source to collect data about the experiences of faculty members in online courses. Results of the study showed that faculty members' interest in using technology and the amount of time available to them for online course design affected the quality of online courses. The findings of this study also indicated that design quality of online courses is affected by the interest of faculty members to use the technology and the time that they can devote to planning, designing, and developing online courses. The poor design of existing online courses, high learning expectations of ndividuals from these courses, and the future of online courses are the concerns of faculty members. Higher education institutions should support workshops and trainings to increase the skills and interests of non-instructional design faculty members to design and develop online courses.

Z-2 Prototype Space Suit Development

Science.gov (United States)

Ross, Amy; Rhodes, Richard; Graziosi, David; Jones, Bobby; Lee, Ryan; Haque, Bazle Z.; Gillespie, John W., Jr.

2014-01-01

NASA's Z-2 prototype space suit is the highest fidelity pressure garment from both hardware and systems design perspectives since the Space Shuttle Extravehicular Mobility Unit (EMU) was developed in the late 1970's. Upon completion the Z-2 will be tested in the 11 foot human-rated vacuum chamber and the Neutral Buoyancy Laboratory (NBL) at the NASA Johnson Space Center to assess the design and to determine applicability of the configuration to micro-, low- (asteroid), and planetary- (surface) gravity missions. This paper discusses the 'firsts' that the Z-2 represents. For example, the Z-2 sizes to the smallest suit scye bearing plane distance for at least the last 25 years and is being designed with the most intensive use of human models with the suit model.

Technology-mediated therapy for chronic pain management: the challenges of adapting behavior change interventions for delivery with pervasive communication technology.

Science.gov (United States)

Rosser, Benjamin A; McCullagh, Paul; Davies, Richard; Mountain, Gail A; McCracken, Lance; Eccleston, Christopher

2011-04-01

Adapting therapeutic practice from traditional face-to-face exchange to remote technology-based delivery presents challenges for the therapist, patient, and technical writer. This article documents the process of therapy adaptation and the resultant specification for the SMART2 project-a technology-based self-management system for assisting long-term health conditions, including chronic pain. Focus group discussions with healthcare professionals and patients were conducted to inform selection of therapeutic objectives and appropriate technology. Pertinent challenges are identified, relating to (1) reduction and definition of therapeutic objectives, and (2) how to approach adaptation of therapy to a form suited to technology delivery. The requirement of the system to provide dynamic and intelligent responses to patient experience and behavior is also emphasized. Solutions to these challenges are described in the context of the SMART2 technology-based intervention. More explicit discussion and documentation of therapy adaptation to technology-based delivery within the literature is encouraged.

On the selection of financing instruments to push the development of new technologies: Application to clean energy technologies

International Nuclear Information System (INIS)

Olmos, Luis; Ruester, Sophia; Liong, Siok-Jen

2012-01-01

Achieving climate policy goals requires mobilizing public funds to bring still immature clean technologies to competitiveness and create new technological options. The format of direct public support must be tailored to the characteristics of technologies addressed. Based on the experience accumulated with innovation programs, we have identified those features of innovation that should directly condition the choice of direct support instruments. These include the funding gap between the cost of innovation activities and the amount of private funds leveraged; the ability of technologies targeted to compete for public funds in the market; the probability that these technologies fail to reach the market; and the type of entity best suited to conduct these activities. Clean innovation features are matched to those of direct support instruments to provide recommendations on the use to be made of each type of instrument. Given the large financing gap of most clean energy innovation projects, public grants and contracts should finance a large part of clean pre-deployment innovation. However, public loans, equity investments, prizes and tax credits or rebates can successfully support certain innovation processes at a lower public cost. Principles derived are applied to identify the instrument best suited to a case example. - Highlights: ► Public financing instruments must be tailored to the features of supported innovation. ► Instruments should trigger desired innovation at the lowest public cost possible. ► They should strike the right balance between technology selection and competition. ► Public funds mobilized through them should reach the innovating entity. ► Public loans, equity investments, prizes, and rebates should be used in specific cases.

Data Analysis and Graphing in an Introductory Physics Laboratory: Spreadsheet versus Statistics Suite

Science.gov (United States)

Peterlin, Primoz

2010-01-01

Two methods of data analysis are compared: spreadsheet software and a statistics software suite. Their use is compared analysing data collected in three selected experiments taken from an introductory physics laboratory, which include a linear dependence, a nonlinear dependence and a histogram. The merits of each method are compared. (Contains 7…

Blending Student Technology Experiences in Formal and Informal Learning

Science.gov (United States)

Lai, K.-W.; Khaddage, F.; Knezek, Gerald

2013-01-01

In this article, we discuss the importance of recognizing students' technology-enhanced informal learning experiences and develop pedagogies to connect students' formal and informal learning experiences, in order to meet the demands of the knowledge society. The Mobile-Blended Collaborative Learning model is proposed as a framework to…

46 CFR 199.214 - Immersion suits and thermal protective aids.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Immersion suits and thermal protective aids. 199.214... Passenger Vessels § 199.214 Immersion suits and thermal protective aids. (a) Each passenger vessel must... an immersion suit. (c) The immersion suits and thermal protective aids required under paragraphs (a...

Human skin in vitro permeation of bentazon and isoproturon formulations with or without protective clothing suit.

Science.gov (United States)

Berthet, Aurélie; Hopf, Nancy B; Miles, Alexandra; Spring, Philipp; Charrière, Nicole; Garrigou, Alain; Baldi, Isabelle; Vernez, David

2014-01-01

Skin exposures to chemicals may lead, through percutaneous permeation, to a significant increase in systemic circulation. Skin is the primary route of entry during some occupational activities, especially in agriculture. To reduce skin exposures, the use of personal protective equipment (PPE) is recommended. PPE efficiency is characterized as the time until products permeate through material (lag time, Tlag). Both skin and PPE permeations are assessed using similar in vitro methods; the diffusion cell system. Flow-through diffusion cells were used in this study to assess the permeation of two herbicides, bentazon and isoproturon, as well as four related commercial formulations (Basagran(®), Basamais(®), Arelon(®) and Matara(®)). Permeation was measured through fresh excised human skin, protective clothing suits (suits) (Microchem(®) 3000, AgriSafe Pro(®), Proshield(®) and Microgard(®) 2000 Plus Green), and a combination of skin and suits. Both herbicides, tested by itself or as an active ingredient in formulations, permeated readily through human skin and tested suits (Tlag < 2 h). High permeation coefficients were obtained regardless of formulations or tested membranes, except for Microchem(®) 3000. Short Tlag, were observed even when skin was covered with suits, except for Microchem(®) 3000. Kp values tended to decrease when suits covered the skin (except when Arelon(®) was applied to skin covered with AgriSafe Pro and Microgard(®) 2000), suggesting that Tlag alone is insufficient in characterizing suits. To better estimate human skin permeations, in vitro experiments should not only use human skin but also consider the intended use of the suit, i.e., the active ingredient concentrations and type of formulations, which significantly affect skin permeation.

Shuttle Laser Technology Experiment Facility (LTEF)-to-airplane lasercom experiment: Airplane considerations

Science.gov (United States)

Kalil, Ford

1990-01-01

NASA is considering the use of various airplanes for a Shuttle Laser Technology Experiment Facility (LTEF)-to-Airplane laser communications experiment. As supporting documentation, pertinent technical details are included about the potential use of airplanes located at Ames Research Center and Wallops Flight Facility. The effects and application of orbital mechanics considerations are also presented, including slant range, azimuth, elevation, and time. The pros and cons of an airplane equipped with a side port with a bubble window versus a top port with a dome are discussed.

PLEASE: The Python Low-energy Electron Analysis SuitE – Enabling Rapid Analysis of LEEM and LEED Data

Directory of Open Access Journals (Sweden)

Maxwell Grady

2018-02-01

Full Text Available PLEASE, the Python Low-energy Electron Analysis SuitE, provides an open source and cross-platform graphical user interface (GUI for rapid analysis and visualization of low energy electron microscopy (LEEM data sets. LEEM and the associated technique, selected area micro-spot low energy electron diffraction (μ-LEED, are powerful tools for analysis of the surface structure for many novel materials. Specifically, these tools are uniquely suited for the characterization of two-dimensional materials. PLEASE offers a user-friendly point-and-click method for extracting intensity-voltage curves from LEEM and LEED data sets. Analysis of these curves provides insight into the atomic structure of the target material surface with unparalleled resolution.

TINY TCP/IP PROTOCOL SUITE FOR EMBEDDED SYSTEMS WITH 32 BIT MICROCONTROLLER

OpenAIRE

Mr. Praful M. Godhankar; Mr. Maske Vishnu Dattatraya; Prof. Shahzia Sayyad

2015-01-01

The scope of embedded devices is increasing day by day and the demand will be further more when networking technology is incorporated into these devices. Many embedded systems not only communicate with each other, but also with computers using a network. All systems connected to the Internet, wireless networks such as WLAN and GPRS, and many local area networks communicate using the standard TCP/IP protocol suite. An embedded system may have as little memory, the memory constraints make progr...

New Technologies in Maritime Education and Training, Turkish Experiment

Science.gov (United States)

Erdogan, Oral; Demirel, Ergun

2017-01-01

The aim of this study is to introduce new technologies and approaches in the maritime education and training (MET) and Turkish experiment/acquisitions/contributions including some analysis which may be helpful for the future studies on this subject. As an example of such an effort, Turkish experiment/contribution on seafaring officer education…

Experience in transfer of nuclear technology

International Nuclear Information System (INIS)

Beckurts, K.H.

1977-01-01

Nuclear energy development in the Federal Republic of Germany was initiated in 1955. In spite of this late start, the country now has a broad potential in all branches of peaceful nuclear technology. Turkey nuclear power plants are erected by German industry, and the country has the basic technology at its disposal for all stages of the nuclear fuel cycle. In the areas of uranium enrichment and reprocessing, multilateral joint ventures with European countries have been formed. The country also has an active development program for advanced reactors. In general areas of technology transfer and development aid, in the nuclear field, there are interrelated activities of both government and industry. The government has concluded bilateral agreements with a number of countires e.g. Argentina, Brazil, India, Iran and Pakistan, covering the general field of nuclear science; in the framework of these agreements, which are being carried out mainly by the nuclear research centers at Juelich and Karlsruhe, active cooperation in research, development, education, and training are being pursued. The nonproliferation of nuclear weapons is a major objective of the Federal government which strongly affects its policies for international nuclear trade. The paper describes the nuclear technology potential available in the Federal Republic of Germany and reviews experience gathered in cooperation with developing countries. Future policies for nuclear technology transfer are discussed with special reference to the role of national R and D laboratories

Blogs: Enhancing the Learning Experience for Technology Students

OpenAIRE

Birney, Rosanne

2006-01-01

Weblogs can be used to enhance the learning experience for technology students, by providing them with several features that are often absent in Learning Management Systems (LMSs). This research aims to demonstrate that weblogs can improve the learning experience by allowing students to reflect on their learning, and by allowing them to easily collaborate with their tutors and with one another. The incorporation of weblogs into the existing learning environment can provide several enhancemen...

European pharmacy students' experience with virtual patient technology.

Science.gov (United States)

Cavaco, Afonso Miguel; Madeira, Filipe

2012-08-10

To describe how virtual patients are being used to simulate real-life clinical scenarios in undergraduate pharmacy education in Europe. One hundred ninety-four participants at the 2011 Congress of the European Pharmaceutical Students Association (EPSA) completed an exploratory cross-sectional survey instrument. Of the 46 universities and 23 countries represented at the EPSA Congress, only 12 students from 6 universities in 6 different countries reported having experience with virtual patient technology. The students were satisfied with the virtual patient technology and considered it more useful as a teaching and learning tool than an assessment tool. Respondents who had not used virtual patient technology expressed support regarding its potential benefits in pharmacy education. French and Dutch students were significantly less interested in virtual patient technology than were their counterparts from other European countries. The limited use of virtual patients in pharmacy education in Europe suggests the need for initiatives to increase the use of virtual patient technology and the benefits of computer-assisted learning in pharmacy education.

Technologically-mediated communication: student expectations and experiences in a FOMO society

Directory of Open Access Journals (Sweden)

Angela T. Ragusa

2017-11-01

Full Text Available Abstract While technology enables a wider section of society to access higher education, accessing, as a process, fundamentally differs from acquiring the individual and systemic skills required for online learning. This study presents primary data about perceptions of, and experiences with, online learning in an Australian university from a survey of 289 distance education (DE students. Epistemologically, it prioritises giving agency and voice to an increasingly disempowered collective, online learners, who often are institutionally pursued for economic advantage, rather than pedagogical interest in serving students’ unique, individual needs/preferences. Participants’ comparison of face-to-face and online learning experiences allowed for benefits and disadvantages of online learning to emerge from lived-experiences. While a key benefit of online learning was its perceived ‘flexibility’, findings revealed difference between students’ conceptualisation of flexibility and institutional realities. Although DE students longed for non-technologically-medicated communication with peers and lecturers, the process of learning how to become a DE student failed to address students’ needs/concerns beyond technical skill acquisition and subject content mastery. Students’ ‘fear they were missing out’ (FOMO on ‘better’ internal classroom and learning experiences was a key limitation 85% perceived about DE. Whereas traditional classroom experiences generally were recalled favourably, online learning was described by its shortcomings. Findings demonstrate need for deeper investigation of how/why educational technologies are implemented. Conclusions suggest critical research investigating whether embedded technologies meet student and/or institutional needs and aspirations in globally competitive learning environments may assuage DE’s stigma, realign expectations and improve teaching/learning experiences.

Westinghouse experience in the transfer of nuclear technology

International Nuclear Information System (INIS)

Simpson, J.W.

1977-01-01

Westinghouse experience with transfer of technical information is two-sided. First is our experience in learning, and the second is our experience in teaching others. Westinghouse conducts a special school to which government, academic and industry people are invited. There are many problems involved in all technology transfers; these include: keeping information current, making certain changes are compatible with the supplier's manufacturing capability and also suitable to the receiver, patent right and proprietary information. The building, testing and maintenance of the unit on the line - and then a succession of its sister plant is the basis for the Westinghouse leadership

A new device for the inflation of the antigravity suit.

Science.gov (United States)

Brodrick, P M

1986-02-01

The 'Schuco' orthopaedic tourniquet inflator can be simply converted into a suitable device for inflating an antigravity suit (G-suit). The antigravity suit may be used on neurosurgical patients undergoing procedures in the sitting position to help prevent hypotension and air embolism. The availability of this device may encourage the more widespread use of an antigravity suit in neuro-anaesthetic practice.

Advanced Space Suit Portable Life Support Subsystem Packaging Design

Science.gov (United States)

Howe, Robert; Diep, Chuong; Barnett, Bob; Thomas, Gretchen; Rouen, Michael; Kobus, Jack

2006-01-01

This paper discusses the Portable Life Support Subsystem (PLSS) packaging design work done by the NASA and Hamilton Sundstrand in support of the 3 future space missions; Lunar, Mars and zero-g. The goal is to seek ways to reduce the weight of PLSS packaging, and at the same time, develop a packaging scheme that would make PLSS technology changes less costly than the current packaging methods. This study builds on the results of NASA s in-house 1998 study, which resulted in the "Flex PLSS" concept. For this study the present EMU schematic (low earth orbit) was used so that the work team could concentrate on the packaging. The Flex PLSS packaging is required to: protect, connect, and hold the PLSS and its components together internally and externally while providing access to PLSS components internally for maintenance and for technology change without extensive redesign impact. The goal of this study was two fold: 1. Bring the advanced space suit integrated Flex PLSS concept from its current state of development to a preliminary design level and build a proof of concept mockup of the proposed design, and; 2. "Design" a Design Process, which accommodates both the initial Flex PLSS design and the package modifications, required to accommodate new technology.

Evaluation of technology transferring: The experiences of the first Navy Domestic Technology Transfair. Final report

Energy Technology Data Exchange (ETDEWEB)

1989-12-31

In August 1989 the Office of the Chief of Naval Research and the American Defense Preparedness Association conducted the first Navy Domestic Technology Transfair. The objective of the Transfair was to expose the US Navy`s years of solid experience across a broad span of technology to organizations outside of the Navy. It was an opportunity for private industry to capitalize on the Navy developed technology and this opening for industry was the primary focus of the Transfair. The event provided a unique forum to meet leading Navy scientific and engineering innovators face-to-face. Information was available concerning licensing of naval technology that was for sale to the private sector. Further, discussions covered opportunities for new cooperative research and development agreements with Navy laboratories and R&D activities. These agreements were authorized under the Federal Technology Transfer Act of 1986. The Transfair program was conducted in such a manner as to allow each Navy inventor, either scientist or engineer, to present a system, piece of hardware, or licensable concept in a formal paper presentation. Then, the Navy inventors were available in two, two-hour periods in which individual discussions were conducted, with attendees pursuing specific venues of cooperative agreements as desired. This report provides specifics concerning the technologies that were made available for transfer to the private sector during the Transfair. The Transfair concept sought to add special emphasis to the opening that the 1988 Technology Transfer Act brought to the marketplace. The experience was a step in the education of the possibilities for cooperation between the government and the private sector to share technology. Of additional significance is the economic enhancement for business expansion with the application of the technology to markets beyond defense.

Hybrid stage I palliation for hypo-plastic left heart condition without a hybrid suite: Suggestions for developing nations

Directory of Open Access Journals (Sweden)

S. Anuradha

2012-07-01

Full Text Available Cardiac hybrid procedures are performed in modern, spacious, and highly equipped hybrid suites in developed countries. Organizing such expensive suites in countries with an emerging economy is difficult from both a financial and logistics point of view. We share our experience of safely performing a Hybrid stage I palliation procedure for Aortic atresia with ventricular septal defect on a 2-month-old infant weighing 3.35 kg using minimal resources in a conventional catheterization laboratory.

Gaming, texting, learning? Teaching engineering ethics through students' lived experiences with technology.

Science.gov (United States)

Voss, Georgina

2013-09-01

This paper examines how young peoples' lived experiences with personal technologies can be used to teach engineering ethics in a way which facilitates greater engagement with the subject. Engineering ethics can be challenging to teach: as a form of practical ethics, it is framed around future workplace experience in a professional setting which students are assumed to have no prior experience of. Yet the current generations of engineering students, who have been described as 'digital natives', do however have immersive personal experience with digital technologies; and experiential learning theory describes how students learn ethics more successfully when they can draw on personal experience which give context and meaning to abstract theories. This paper reviews current teaching practices in engineering ethics; and examines young people's engagement with technologies including cell phones, social networking sites, digital music and computer games to identify social and ethical elements of these practices which have relevance for the engineering ethics curricula. From this analysis three case studies are developed to illustrate how facets of the use of these technologies can be drawn on to teach topics including group work and communication; risk and safety; and engineering as social experimentation. Means for bridging personal experience and professional ethics when teaching these cases are discussed. The paper contributes to research and curriculum development in engineering ethics education, and to wider education research about methods of teaching 'the net generation'.

Engineering Software Suite Validates System Design

Science.gov (United States)

2007-01-01

EDAptive Computing Inc.'s (ECI) EDAstar engineering software tool suite, created to capture and validate system design requirements, was significantly funded by NASA's Ames Research Center through five Small Business Innovation Research (SBIR) contracts. These programs specifically developed Syscape, used to capture executable specifications of multi-disciplinary systems, and VectorGen, used to automatically generate tests to ensure system implementations meet specifications. According to the company, the VectorGen tests considerably reduce the time and effort required to validate implementation of components, thereby ensuring their safe and reliable operation. EDASHIELD, an additional product offering from ECI, can be used to diagnose, predict, and correct errors after a system has been deployed using EDASTAR -created models. Initial commercialization for EDASTAR included application by a large prime contractor in a military setting, and customers include various branches within the U.S. Department of Defense, industry giants like the Lockheed Martin Corporation, Science Applications International Corporation, and Ball Aerospace and Technologies Corporation, as well as NASA's Langley and Glenn Research Centers

Science Student Teachers and Educational Technology: Experience, Intentions, and Value

Science.gov (United States)

Efe, Rifat

2011-01-01

The primary purpose of this study is to examine science student teachers' experience with educational technology, their intentions for their own use, their intentions for their students' use, and their beliefs in the value of educational technology in science instruction. Four hundred-forty-eight science student teachers of different disciplines…

An economic perspective on experience curves and dynamic economies in renewable energy technologies

International Nuclear Information System (INIS)

Papineau, Maya

2006-01-01

This paper analyzes dynamic economies in renewable energy technologies. The paper has two contributions. The first is to test the robustness of experience in solar photovoltaic, solar thermal and wind energy to the addition of an explicit time trend, which has been done in experience studies for other industries, but not for renewable energy technologies. Estimation is carried out on the assumption that cumulative capacity, industry production, average firm production, and electricity generation affect experience and thus the fall in price. The second contribution is to test the impact of R and D on price reduction. In general cumulative experience is found to be highly statistically significant when estimated alone, and highly statistically insignificant when time is added to the model. The effect of R and D is small and statistically significant in solar photovoltaic technology and statistically insignificant in solar thermal and wind technologies

Designing Technology for Active Spectator Experiences at Sporting Events

DEFF Research Database (Denmark)

Veerasawmy, Rune; Ludvigsen, Martin

2010-01-01

This paper explores the active spectator experience at sporting events, by presenting and reflecting upon a design experiment carried out at a number of football1 events. The initial hypothesis of the design process, leading to the design experiment has been that the spectator experience is not m......This paper explores the active spectator experience at sporting events, by presenting and reflecting upon a design experiment carried out at a number of football1 events. The initial hypothesis of the design process, leading to the design experiment has been that the spectator experience...... is not merely an experience of receiving and consuming entertainment. It is also heavily reliant on the active participation of the spectator in creating the atmosphere of the entire event. The BannerBattle experiment provides interactive technology in sport arenas with a form of interaction based on existing...

Electrically Driven Thermal Management: Flight Validation, Experiment Development, Future Technologies

Science.gov (United States)

Didion, Jeffrey R.

2018-01-01

Electrically Driven Thermal Management is an active research and technology development initiative incorporating ISS technology flight demonstrations (STP-H5), development of Microgravity Science Glovebox (MSG) flight experiment, and laboratory-based investigations of electrically based thermal management techniques. The program targets integrated thermal management for future generations of RF electronics and power electronic devices. This presentation reviews four program elements: i.) results from the Electrohydrodynamic (EHD) Long Term Flight Demonstration launched in February 2017 ii.) development of the Electrically Driven Liquid Film Boiling Experiment iii.) two University based research efforts iv.) development of Oscillating Heat Pipe evaluation at Goddard Space Flight Center.

Immersion Suit Usage Within the RAAF

Science.gov (United States)

1992-01-01

IMMERSION SUIT USED UVIC QDIS HOLDINGS 202. in 12 Sizes, held by ALSS 492SQN REQUIREMENTS No comment USAGE POLICY REFERENCE DIRAF) AAP 7215.004-1 (P3C...held by ALSS 492SQN. REQUIREMENTS No comment ISACE POLICY REFERENCE DIIAF) AAP 7215.004-1 (P3C Flight Manual) RAAF Supplement No 92 USAGE POUICY UVIC...TYPE P3C REFERENCE Telecon FLTLT Toft I I SQNfRESO AVMED Dated 22 Mar 91 IMMERSION SUIT USED UVIC QDIS HOLDINGS No comment REQUIREMENTS No comment USAGE

Adversarial risks in social experiments with new technologies

NARCIS (Netherlands)

Pieters, Wolter; Dechesne, Francien; van der Poel, Ibo; Asveld, Lotte; Mehos, Donna C.

2017-01-01

Studies that approach the deployment of new technologies as social experiments have mostly focused on unintentional effects, notably safety. We argue for the inclusion of adversarial risks or security aspects that are the result of intentional, strategic behavior of actors, who aim at using the

Advanced Sensor Platform to Evaluate Manloads for Exploration Suit Architectures

Data.gov (United States)

National Aeronautics and Space Administration — Space suit manloads are defined as the outer bounds of force that the human occupant of a suit is able to exert onto the suit during motion. They are defined on a...

Alterations in MAST suit pressure with changes in ambient temperature.

Science.gov (United States)

Sanders, A B; Meislin, H W; Daub, E

1983-01-01

A study was undertaken to test the hypothesis that change in ambient air temperature has an effect on MAST suit pressure according to the ideal gas law. Two different MAST suits were tested on Resusci-Annie dummies. The MAST suits were applied in a cold room at 4.4 degrees C and warmed to 44 degrees C. Positive linear correlations were found in nine trials, but the two suits differed in their rate of increase in pressure. Three trials using humans were conducted showing increased pressure with temperature but at a lesser rate than with dummies. A correlation of 0.5 to 1.0 mm Hg increase in MAST suit pressure for each 1.0 degrees C increase in ambient temperature was found. Implications are discussed for the use of the MAST suit in environmental conditions where the temperature changes.

Motivating students to perform an experiment in technological design contexts

NARCIS (Netherlands)

Logman, P.S.W.M.; Kaper, W.H.; Ellermeijer, A.L.; Lindell, A.; Kähkönen, A.-L.; Viiri, J.

2012-01-01

In a teaching-learning sequence on the subject of energy we have tried technological design contexts to motivate students by using only context-based reasons to perform experiments on the subject of energy. We use these experiments to have the students reinvent practical laws of energy conservation

Antigravity suit inflation: kidney function and cardiovascular and hormonal responses in men.

Science.gov (United States)

Geelen, G; Kravik, S E; Hadj-Aissa, A; Leftheriotis, G; Vincent, M; Bizollon, C A; Sem-Jacobsen, C W; Greenleaf, J E; Gharib, C

1989-02-01

To investigate the effects of lower body positive pressure (LBPP) on kidney function while controlling certain cardiovascular and endocrine responses, seven men [35 +/- 2 (SE) yr] underwent 30 min of sitting and then 4.5 h of 70 degrees head-up tilt. An antigravity suit was applied (60 Torr legs, 30 Torr abdomen) during the last 3 h of tilt. A similar noninflation experiment was conducted where the suited subjects were tilted for 3.5 h. To provide adequate urine flow, the subjects were hydrated during the course of both experiments. Immediately after inflation, mean arterial pressure increased by 8 +/- 3 Torr and pulse rate decreased by 16 +/- 3 beats/min. Plasma renin activity and aldosterone were maximally suppressed (P less than 0.05) after 2.5 h of inflation. Plasma vasopressin decreased by 40-50% (P less than 0.05) and plasma sodium and potassium remained unchanged during both experiments. Glomerular filtration rate was not increased significantly by inflation, whereas inflation induced marked increases (P less than 0.05) in effective renal plasma flow (ERPF), urine flow, osmolar and free water clearances, and total and fractional sodium excretion. No such changes occurred during control. Thus, LBPP induces 1) a significant increase in ERPF and 2) significant changes in kidney excretory patterns similar to those observed during water immersion or the early phase of bed rest, situations that also result in central vascular volume expansion.

Using assistive technology for schoolwork: the experience of children with physical disabilities.

Science.gov (United States)

Murchland, Sonya; Parkyn, Helen

2010-01-01

This study explored the experience of children with physical disabilities using assistive technology for participation with schoolwork to gain a greater understanding of their perspectives and subjective experiences. A qualitative study involving thematic analysis of in-depth interviews of the child with a parent or significant adult. Purposeful sampling from a larger study recruited five children aged between 10 and 14 years, with differing physical disabilities who attended mainstream schools. All children used computer-based assistive technology. All of the children recognised that assistive technology enabled them to participate and reduced the impact of their physical disability, allowing independent participation, and facilitated higher learning outcomes. Issues related to ease of use, social implications and assistive technology systems are discussed.

Satellite Ocean Heat Content Suite

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This collection contains an operational Satellite Ocean Heat Content Suite (SOHCS) product generated by NOAA National Environmental Satellite, Data, and Information...

EVA Suit Microbial Leakage Investigation

Data.gov (United States)

National Aeronautics and Space Administration — The objective of this project is to collect microbial samples from various EVA suits to determine how much microbial contamination is typically released during...

The Relationship Between Digital Technology Experience, Daily Media Exposure and Working Memory Capacity

Directory of Open Access Journals (Sweden)

Muhterem DİNDAR

2016-06-01

Full Text Available Today’s youngsters interact with digital technologies to a great extent which leads scholars to question the influence of this exposure on human cognitive structure. Through resorting to digital nativity assumptions, it is presumed that cognitive architecture of the youth may change in accordance with digital technology use. In this regard, the current study investigated the relationship between digital technology experience, daily media exposure and working memory capacity of so-called digital native participants. A total of 572 undergraduate students responded to self-report measures, which addressed years of experience for 7 different digital devices and the daily time spent for 14 different digital activities. Participants’ working memory capacity was measured through the Computation Span and the Dot Matrix Test. While the former was used to measure the phonological loop capacity, the latter was used to address the visuo-spatial sketchpad capacity. Correlational analyses revealed that neither the phonological loop capacity nor the visuo-spatial sketchpad capacity was related to digital technology experience and daily media exposure. Thus, the transformative contribution of digital technology experience to human cognitive architecture could not be observed through the current measures

EDL Sensor Suite, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Optical Air Data Systems (OADS) L.L.C. proposes a LIDAR based remote measurement sensor suite capable of satisfying a significant number of the desired sensing...

Enhanced Verification Test Suite for Physics Simulation Codes

Energy Technology Data Exchange (ETDEWEB)

Kamm, J R; Brock, J S; Brandon, S T; Cotrell, D L; Johnson, B; Knupp, P; Rider, W; Trucano, T; Weirs, V G

2008-10-10

This document discusses problems with which to augment, in quantity and in quality, the existing tri-laboratory suite of verification problems used by Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and Sandia National Laboratories (SNL). The purpose of verification analysis is demonstrate whether the numerical results of the discretization algorithms in physics and engineering simulation codes provide correct solutions of the corresponding continuum equations. The key points of this document are: (1) Verification deals with mathematical correctness of the numerical algorithms in a code, while validation deals with physical correctness of a simulation in a regime of interest. This document is about verification. (2) The current seven-problem Tri-Laboratory Verification Test Suite, which has been used for approximately five years at the DOE WP laboratories, is limited. (3) Both the methodology for and technology used in verification analysis have evolved and been improved since the original test suite was proposed. (4) The proposed test problems are in three basic areas: (a) Hydrodynamics; (b) Transport processes; and (c) Dynamic strength-of-materials. (5) For several of the proposed problems we provide a 'strong sense verification benchmark', consisting of (i) a clear mathematical statement of the problem with sufficient information to run a computer simulation, (ii) an explanation of how the code result and benchmark solution are to be evaluated, and (iii) a description of the acceptance criterion for simulation code results. (6) It is proposed that the set of verification test problems with which any particular code be evaluated include some of the problems described in this document. Analysis of the proposed verification test problems constitutes part of a necessary--but not sufficient--step that builds confidence in physics and engineering simulation codes. More complicated test cases, including physics models of

Investigating the effects of smart technology on customer dynamics and customer experience

OpenAIRE

Foroudi, Pantea; Gupta, Suraksha; Sivarajah, Uthayasankar; Broderick, Amanda

2018-01-01

Increased use of smart technologies by customers is leading to recognition of their influence on the shopping experiences of customers by practitioners. However, the academic literature fails to acknowledge the influence of smart technology usage, combined with behavioural intention of the customer, on the dynamics and experience of customers. This research utilises explanatory research at the preliminary stage to examine this phenomenon in a retail setting. A conceptual framework was created...

Performance of active vibration control technology: the ACTEX flight experiments

Science.gov (United States)

Nye, T. W.; Manning, R. A.; Qassim, K.

1999-12-01

This paper discusses the development and results of two intelligent structures space-flight experiments, each of which could affect architecture designs of future spacecraft. The first, the advanced controls technology experiment I (ACTEX I), is a variable stiffness tripod structure riding as a secondary payload on a classified spacecraft. It has been operating well past its expected life since becoming operational in 1996. Over 60 on-orbit experiments have been run on the ACTEX I flight experiment. These experiments form the basis for in-space controller design problems and for concluding lifetime/reliability data on the active control components. Transfer functions taken during the life of ACTEX I have shown consistent predictability and stability in structural behavior, including consistency with those measurements taken on the ground prior to a three year storage period and the launch event. ACTEX I can change its modal characteristics by employing its dynamic change mechanism that varies preloads in portions of its structure. Active control experiments have demonstrated maximum vibration reductions of 29 dB and 16 dB in the first two variable modes of the system, while operating over a remarkable on-orbit temperature range of -80 °C to 129 °C. The second experiment, ACTEX II, was successfully designed, ground-tested, and integrated on an experimental Department of Defense satellite prior to its loss during a launch vehicle failure in 1995. ACTEX II also had variable modal behavior by virtue of a two-axis gimbal and added challenges of structural flexibility by being a large deployable appendage. Although the loss of ACTEX II did not provide space environment experience, ground testing resulted in space qualifying the hardware and demonstrated 21 dB, 14 dB, and 8 dB reductions in amplitude of the first three primary structural modes. ACTEX II could use either active and/or passive techniques to affect vibration suppression. Both experiments trailblazed

Variable Vector Countermeasure Suit for Space Habitation and Exploration

Data.gov (United States)

National Aeronautics and Space Administration — The "Variable Vector Countermeasure Suit (V2Suit) for Space Habitation and Exploration" is a visionary system concept that will revolutionize space missions by...

NetSuite OneWorld Implementation 2011 R2

CERN Document Server

Foydel, Thomas

2011-01-01

This book is a focused, step-by step tutorial that shows you how to successfully implement NetSuite OneWorld into your organization. It is written in an easy-to-read style, with a strong emphasis on real-world, practical examples with step-by-step explanations. The book focuses on NetSuite OneWorld 2011 R1. If you are an application administrator, business analyst, project team member or business process owner who wants to implement NetSuite OneWorld into your organization, then this book is for you. This book might also be useful if you are a business manager considering a new system for your

Prokofieff: Krieg und Frieden (Sinfonische Suite), Die Verlobung im Kloster (Sommernacht-Suite), Russische Overtüre. Philharmonia Orchestra, Neeme Järvi / G. W.

Index Scriptorium Estoniae

G. W.

1993-01-01

Uuest heliplaadist "Prokofieff: Krieg und Frieden (Sinfonische Suite), Die Verlobung im Kloster (Sommernacht-Suite), Russische Overtüre. Philharmonia Orchestra, Neeme Järvi. (AD: 1991). Chandos/Koch CD 9096

New technologies in robotic surgery: the Korean experience.

Science.gov (United States)

Tuliao, Patrick H; Kim, Sang W; Rha, Koon H

2014-01-01

The development of the robotic systems has made surgery an increasingly technology-driven field. Since the introduction of the first robotic platform in 2005, surgical practice in South Korea has also been caught up in the global robotic revolution. Consequently, a market focused on improving the robotic systems was created and Korea has emerged as one of its frontrunners. This article reviews the Korean experience in developing various robotic technologies and then Korea's most recent contributions to the development of new technologies in robotic surgery. The goal of new technologies in the field of robotic surgery has been to improve on the current platforms by eliminating their disadvantages. The pressing goal is to develop a platform that is less bulky, more ergonomic, and capable of providing force feedback to the surgeon. In Korea, the Lapabot and two new robotic systems for single-port laparoscopic surgery are the most recent advances that have been reported. Robotic surgery is rapidly evolving and Korea has stayed in the forefront of its development. These new advancements in technology will eventually produce better robotic platforms that will greatly improve the manner in which surgical care is delivered.

INVESTIGATING AND COMMUNICATING TECHNOLOGY MATHEMATICS PROBLEM SOLVING EXPERIENCE OF TWO PRESERVICE TEACHERS

Directory of Open Access Journals (Sweden)

Ana Kuzle

2012-04-01

Full Text Available In this paper, I report on preservice teachers’ reflections and perceptions on theirproblem-solving process in a technological context. The purpose of the study was to to investigatehow preservice teachers experience working individually in a dynamic geometry environment andhow these experiences affect their own mathematical activity when integrating content (nonroutineproblems and context (technology environment. Careful analysis of participants’ perceptionsregarding their thinking while engaged in problem solving, provided an opportunity to explorehow they explain the emergence of problem solving when working in a dynamic geometryenvironment. The two participants communicated their experience both through the lenses ofthemselves as problem solvers and as future mathematics educators. Moreover, the results of thestudy indicated that problem solving in a technology environment does not necessarily allow focuson decision-making, reflection, and problem solving processes as reported by previous research.

Value-based Proposition for a Dedicated Interventional Pulmonology Suite: an Adaptable Business Model.

Science.gov (United States)

Desai, Neeraj R; French, Kim D; Diamond, Edward; Kovitz, Kevin L

2018-05-31

Value-based care is evolving with a focus on improving efficiency, reducing cost, and enhancing the patient experience. Interventional pulmonology has the opportunity to lead an effective value-based care model. This model is supported by the relatively low cost of pulmonary procedures and has the potential to improve efficiencies in thoracic care. We discuss key strategies to evaluate and improve efficiency in Interventional Pulmonology practice and describe our experience in developing an interventional pulmonology suite. Such a model can be adapted to other specialty areas and may encourage a more coordinated approach to specialty care. Copyright © 2018. Published by Elsevier Inc.

Instrumented Suit Hard Upper Torso (HUT) for Ergonomic Assessment

Data.gov (United States)

National Aeronautics and Space Administration — It is well known that the EVA suit (EMU) has the potential to cause crew injury and decreased performance. Engineering data on the suit interaction of the human...

Strategy of nuclear power technology: learn from Korea experience

International Nuclear Information System (INIS)

Sriyana; Nurlaila

2003-01-01

Technology is one of the economic and social elements which play an important role in modernization process. When modernity ideas come into society, technology will become fundamental prerequisite for the shake of its form of modem economic social system of the society. Therefore, various effort modernize society involve program of transfer technology in main agenda. Purpose of this study is to choose a process of technology transfer and according to be able to reach for technological ability of nuclear power self-reliance. This research is conducted by study of existing literature, namely learn from experience of Korea which have succeeded to develop nuclear energy technology with self-reliance. While this research scope is to describe the process of technology transfer and according to be able to reach for technological ability of nuclear energy self-reliance. This study conclude that program of technology transfer have to start since nuclear power development pre-project period, project construction of NPP period and also in operation period. To reach for technological ability of self-reliance require to be done by long-term program and require to be build by several units which last for a transfer of technology. Government Commitment to have important role also have to be strong to push the happening of technology transfer. Institutions in concerned should have to be clear and hold responsible according to its interest. National industries as executor of technology transfer require to be given by larger ones opportunity in course of transfer this technology. (author)

Ultraviolet Testing of Space Suit Materials for Mars

Science.gov (United States)

Larson, Kristine; Fries, Marc

2017-01-01

Human missions to Mars may require radical changes in the approach to extra-vehicular (EVA) suit design. A major challenge is the balance of building a suit robust enough to complete multiple EVAs under intense ultraviolet (UV) light exposure without losing mechanical strength or compromising the suit's mobility. To study how the materials degrade on Mars in-situ, the Jet Propulsion Laboratory (JPL) invited the Advanced Space Suit team at NASA's Johnson Space Center (JSC) to place space suit materials on the Scanning Habitable Environments with Raman & Luminescence for Organics and Chemicals (SHERLOC) instrument's calibration target of the Mars 2020 rover. In order to select materials for the rover and understand the effects from Mars equivalent UV exposure, JSC conducted ground testing on both current and new space suit materials when exposed to 2500 hours of Mars mission equivalent UV. To complete this testing, JSC partnered with NASA's Marshall Space Flight Center to utilize their UV vacuum chambers. Materials tested were Orthofabric, polycarbonate, Teflon, Dacron, Vectran, spectra, bladder, nGimat coated Teflon, and nGimat coated Orthofabric. All samples were measured for mass, tensile strength, and chemical composition before and after radiation. Mass loss was insignificant (less than 0.5%) among the materials. Most materials loss tensile strength after radiation and became more brittle with a loss of elongation. Changes in chemical composition were seen in all radiated materials through Spectral Analysis. Results from this testing helped select the materials that will fly on the Mars 2020 rover. In addition, JSC can use this data to create a correlation to the chemical changes after radiation-which is what the rover will send back while on Mars-to the mechanical changes, such as tensile strength.

International water and sanitation technology transfers, experiences from Europe

NARCIS (Netherlands)

Krozer, Yoram; Hophmayer Tokich, Sharon

2016-01-01

Possibilities of transferring cost-effective, innovative water and wastewater technologies on public water markets are discussed based on experiences of the Dutch water business cluster in the Central and Eastern European Countries. These transfers evolved under suitable conditions, among others

Development of an advanced rocket propellant handler's suit

Science.gov (United States)

Doerr, DonaldF.

2001-08-01

Most launch vehicles and satellites in the US inventory rely upon the use of hypergolic rocket propellants, many of which are toxic to humans. These fuels and oxidizers, such as hydrazine and nitrogen tetroxide have threshold limit values as low as 0.01 PPM. It is essential to provide space workers handling these agents whole body protection as they are universally hazardous not only to the respiratory system, but the skin as well. This paper describes a new method for powering a whole body protective garment to assure the safety of ground servicing crews. A new technology has been developed through the small business innovative research program at the Kennedy Space Center. Currently, liquid air is used in the environmental control unit (ECU) that powers the propellant handlers suit (PHE). However, liquid air exhibits problems with attitude dependence, oxygen enrichment, and difficulty with reliable quantity measurement. The new technology employs the storage of the supply air as a supercritical gas. This method of air storage overcomes all of three problems above while maintaining high density storage at relatively low vessel pressures (protective ensemble marked an advancement in the state-of-the-art in personal protective equipment. Not only was long duration environmental control provided, but it was done without a high pressure vessel. The unit met human performance needs for attitude independence, oxygen stability, and relief of heat stress. This supercritical air (and oxygen) technology is suggested for microgravity applications in life support such as the Extravehicular Mobility Unit.

Information Technology and the Experience of Disorder

Directory of Open Access Journals (Sweden)

Jonathan Paul Marshall

2012-11-01

Full Text Available Information and communication technology (ICT is a prime modality of ordering in the contemporary world. However, order creates and needs its own disorder, and ICT has a long record of failing to deliver on its promises and creating the experience of disorder. This paper looks at the myths of ordering around ICT and then looks at people's experiences of ICT disorder. In particular it looks at three factors: the informal networks that develop because of problems with ICT and with ICT help; the failure of management and communication in hierarchy and finally the failure of requirements engineering to live up to its promise. This focus on disorder may suggest a new way of approaching the so-called ‘Information Society’.

Advance Power Technology Experiment for the Starshine 3 Satellite

Science.gov (United States)

Jenkins, Phillip; Scheiman, David; Wilt, David; Raffaelle, Ryne; Button, Robert; Smith, Mark; Kerslake, Thomas; Miller, Thomas; Bailey, Sheila (Technical Monitor); Hepp, A. (Technical Monitor)

2001-01-01

The Starshine 3 satellite will carry several power technology demonstrations. Since Starshine 3 is primarily a passive experiment and does not need electrical power to successfully complete its mission, the requirement for a highly reliable power system is greatly reduced. This creates an excellent opportunity to test new power technologies. Several government and commercial interests have teamed up to provide Starshine 3 with a small power system using state-of-the-art components. Starshine 3 will also fly novel integrated microelectronic power supplies (IWS) for evaluation.

Sound Descriptions of Haptic Experiences of Art Work by Deafblind Cochlear Implant Users

Directory of Open Access Journals (Sweden)

Riitta Lahtinen

2018-05-01

Full Text Available Deafblind persons’ perception and experiences are based on their residual auditive and visual senses, and touch. Their haptic exploration, through movements and orientation towards objects give blind persons direct, independent experience. Few studies explore the aesthetic experiences and appreciation of artefacts of deafblind people using cochlear implant (CI technology, and how they interpret and express their perceived aesthetic experience through another sensory modality. While speech recognition is studied extensively in this area, the aspect of auditive descriptions made by CI users are a less-studied domain. This present research intervention describes and analyses five different deafblind people sharing their interpretation of five statues vocally, using sounds and written descriptions based on their haptic explorations. The participants found new and multimodal ways of expressing their experiences, as well as re-experiencing them through technological aids. We also found that the CI users modify technology to better suit their personal needs. We conclude that CI technology in combination with self-made sound descriptions enhance memorization of haptic art experiences that can be re-called by the recording of the sound descriptions. This research expands the idea of auditive descriptions, and encourages user-produced descriptions as artistic supports to traditional linguistic, audio descriptions. These can be used to create personal auditive–haptic memory collections similar to how sighted create photo albums.

Utilizing HPC Network Technologies in High Energy Physics Experiments

CERN Document Server

AUTHOR|(CDS)2088631; The ATLAS collaboration

2017-01-01

Because of their performance characteristics high-performance fabrics like Infiniband or OmniPath are interesting technologies for many local area network applications, including data acquisition systems for high-energy physics experiments like the ATLAS experiment at CERN. This paper analyzes existing APIs for high-performance fabrics and evaluates their suitability for data acquisition systems in terms of performance and domain applicability. The study finds that existing software APIs for high-performance interconnects are focused on applications in high-performance computing with specific workloads and are not compatible with the requirements of data acquisition systems. To evaluate the use of high-performance interconnects in data acquisition systems a custom library, NetIO, is presented and compared against existing technologies. NetIO has a message queue-like interface which matches the ATLAS use case better than traditional HPC APIs like MPI. The architecture of NetIO is based on a interchangeable bac...

Volvo drivers' experiences with advanced crash avoidance and related technologies.

Science.gov (United States)

Eichelberger, Angela H; McCartt, Anne T

2014-01-01

Crash avoidance technologies can potentially prevent or mitigate many crashes, but their success depends in part on driver acceptance. Owners of 2010-2012 model Volvo vehicles with several technologies were interviewed about their experiences. Interviews were conducted in summer 2012 with 155 owners of vehicles with City Safety as a standard feature; 145 owners with an optional technology package that included adaptive cruise control, distance alert, collision warning with full auto brake (and pedestrian detection on certain models), driver alert control, and lane departure warning; and 172 owners with both City Safety and the technology package. The survey response rates were 21 percent for owners with City Safety, 30 percent for owners with the technology package, and 27 percent for owners with both. Ten percent of owners opted out before the telephone survey began, and 18 percent declined to participate when called. Despite some annoyance, most respondents always leave the systems on, although fewer do so for lane departure warning (59%). For each of the systems, at least 80 percent of respondents with the system would want it on their next vehicle. Many respondents reported safer driving habits with the systems (e.g., following less closely with adaptive cruise control, using turn signals more often with lane departure warning). Fewer respondents reported potentially unsafe behavior, such as allowing the vehicle to brake for them at least some of the time. About one third of respondents experienced autonomous braking when they believed they were at risk of crashing, and about one fifth of respondents thought it had prevented a crash. About one fifth of respondents with the technology package reported that they were confused or misunderstood which safety system had activated in their vehicle. Consistent with the results for early adopters in the previous survey of Volvo and Infiniti owners, the present survey found that driver acceptance of the technologies

The VELOCE pulsed power generator for isentropic compression experiments

Energy Technology Data Exchange (ETDEWEB)

Ao, Tommy [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Dynamic Material Properties; Asay, James Russell [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Dynamic Material Properties; Chantrenne, Sophie J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Dynamic Material Properties; Hickman, Randall John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Dynamic Material Properties; Willis, Michael David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Dynamic Material Properties; Shay, Andrew W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Dynamic Material Properties; Grine-Jones, Suzi A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Dynamic Material Properties; Hall, Clint Allen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Dynamic Material Properties; Baer, Melvin R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Engineering Sciences Center

2007-12-01

Veloce is a medium-voltage, high-current, compact pulsed power generator developed for isentropic and shock compression experiments. Because of its increased availability and ease of operation, Veloce is well suited for studying isentropic compression experiments (ICE) in much greater detail than previously allowed with larger pulsed power machines such as the Z accelerator. Since the compact pulsed power technology used for dynamic material experiments has not been previously used, it is necessary to examine several key issues to ensure that accurate results are obtained. In the present experiments, issues such as panel and sample preparation, uniformity of loading, and edge effects were extensively examined. In addition, magnetohydrodynamic (MHD) simulations using the ALEGRA code were performed to interpret the experimental results and to design improved sample/panel configurations. Examples of recent ICE studies on aluminum are presented.

Moral responsibility, technology, and experiences of the tragic: from Kierkegaard to offshore engineering.

Science.gov (United States)

Coeckelbergh, Mark

2012-03-01

The standard response to engineering disasters like the Deepwater Horizon case is to ascribe full moral responsibility to individuals and to collectives treated as individuals. However, this approach is inappropriate since concrete action and experience in engineering contexts seldom meets the criteria of our traditional moral theories. Technological action is often distributed rather than individual or collective, we lack full control of the technology and its consequences, and we lack knowledge and are uncertain about these consequences. In this paper, I analyse these problems by employing Kierkegaardian notions of tragedy and moral responsibility in order to account for experiences of the tragic in technological action. I argue that ascription of responsibility in engineering contexts should be sensitive to personal experiences of lack of control, uncertainty, role conflicts, social dependence, and tragic choice. I conclude that this does not justify evading individual and corporate responsibility, but inspires practices of responsibility ascription that are less 'harsh' on those directly involved in technological action, that listen to their personal experiences, and that encourage them to gain more knowledge about what they are doing. © The Author(s) 2010. This article is published with open access at Springerlink.com

Lignite mining in India - thirty years of rich experience

Energy Technology Data Exchange (ETDEWEB)

Tandon, G L

1984-11-01

Exploration of the huge deposits of lignite at Neyveli in Tamil Nadu commenced in 1961 by the opencast method by deploying continuously operating machinery such as bucket-wheel excavators, spreaders and high-speed belt conveyor systems. Adoption of this mining technology to suit the peculiar site conditions at Neyveli has led to many modifications in the equipment and has enriched the experience of the Neyveli Lignite Corporation. This has also made it possible for NLC to formulate schemes for exploration and exploitation of lignite deposits occurring elsewhere in the country.

Lignite mining in India - thirty years of rich experience

Energy Technology Data Exchange (ETDEWEB)

Tandon, G L

1984-11-01

Exploitation of the huge deposits of lignite at Neyveli in Tamil Nadu commenced in 1961 by opencast method by deploying continuously operating machinery such as bucket-wheel excavators, headers and high speed belt conveyor systems. Adoption of this mining technology to suit the peculiar site conditions at Neyveli has led to many modifications in the equipment and has enriched the experience of the Neyveli Lignite Corporation. This has also made it possible for NLC to formulate schemes for exploration and exploitation of lignite deposits occurring elsewhere in the country.

76 FR 4350 - Health Information Technology Extension Program

Science.gov (United States)

2011-01-25

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Information Technology Extension Program ACTION: Public Notice. SUMMARY: This notice announces changes to the Health Information Technology Extension... of the National Coordinator for Health Information Technology, 200 Independence Ave, SW., Suite 729D...

Flight Experiments for Living With a Star Space Environment Testbed (LWS-SET): Relationship to Technology

Science.gov (United States)

LaBel, Kenneth A.; Barth, Janet L.; Brewer, Dana A.

2003-01-01

This viewgraph presentation provides information on flight validation experiments for technologies to determine solar effects. The experiments are intended to demonstrate tolerance to a solar variant environment. The technologies tested are microelectronics, photonics, materials, and sensors.

Seamless learning: Technology-enhanced learning from practical experiences across contexts

NARCIS (Netherlands)

Rusman, Ellen

2018-01-01

Rusman, E. (2018, 8th of June). Seamless learning: Technology-enhanced learning from practical experiences across contexts. Keynote presentation at the Seamless learning conference, Maastricht, The Netherlands. http://www.ou.nl/slc

Cloud Computing Technologies in Writing Class: Factors Influencing Students’ Learning Experience

Directory of Open Access Journals (Sweden)

Jenny WANG

2017-07-01

Full Text Available The proposed interactive online group within the cloud computing technologies as a main contribution of this paper provides easy and simple access to the cloud-based Software as a Service (SaaS system and delivers effective educational tools for students and teacher on after-class group writing assignment activities. Therefore, this study addresses the implementation of the most commonly used cloud applications, Google Docs, in a higher education course. The learning environment integrated Google Docs that students are using to develop and deploy writing assignments in between classes has been subjected to learning experience assessment. Using the questionnaire as an instrument to study participants (n=28, the system has provided an effective learning environment in between classes for the students and the instructor to stay connected. Factors influencing students’ learning experience based on cloud applications include frequency of interaction online and students’ technology experience. Suggestions to cope with challenges regarding the use of them in higher education including the technical issues are also presented. Educators are therefore encouraged to embrace cloud computing technologies as they design the course curriculum in hoping to effectively enrich students’ learning.

Theory and experiments in model-based space system anomaly management

Science.gov (United States)

Kitts, Christopher Adam

This research program consists of an experimental study of model-based reasoning methods for detecting, diagnosing and resolving anomalies that occur when operating a comprehensive space system. Using a first principles approach, several extensions were made to the existing field of model-based fault detection and diagnosis in order to develop a general theory of model-based anomaly management. Based on this theory, a suite of algorithms were developed and computationally implemented in order to detect, diagnose and identify resolutions for anomalous conditions occurring within an engineering system. The theory and software suite were experimentally verified and validated in the context of a simple but comprehensive, student-developed, end-to-end space system, which was developed specifically to support such demonstrations. This space system consisted of the Sapphire microsatellite which was launched in 2001, several geographically distributed and Internet-enabled communication ground stations, and a centralized mission control complex located in the Space Technology Center in the NASA Ames Research Park. Results of both ground-based and on-board experiments demonstrate the speed, accuracy, and value of the algorithms compared to human operators, and they highlight future improvements required to mature this technology.

Volvo and Infiniti drivers' experiences with select crash avoidance technologies.

Science.gov (United States)

Braitman, Keli A; McCartt, Anne T; Zuby, David S; Singer, Jeremiah

2010-06-01

Vehicle-based crash avoidance systems can potentially reduce crashes, but success depends on driver acceptance and understanding. This study gauged driver use, experience, and acceptance among early adopters of select technologies. Telephone interviews were conducted in early 2009 with 380 owners of Volvo vehicles equipped with forward collision warning with autobrake, lane departure warning, side-view assist, and/or active bi-xenon headlights and 485 owners of Infiniti vehicles with lane departure warning/prevention. Most owners kept systems turned on most of the time, especially forward collision warning with autobrake and side-view assist. The exception was lane departure prevention; many owners were unaware they had it, and the system must be activated each time the vehicle is started. Most owners reported being safer with the technologies and would want them again on their next vehicles. Perceived false or unnecessary warnings were fairly common, particularly with side-view assist. Some systems were annoying, especially lane departure warning. Many owners reported safer driving behaviors such as greater use of turn signals (lane departure warning), increased following distance (forward collision warning), and checking side mirrors more frequently (side-view assist), but some reported driving faster at night (active headlights). Despite some unnecessary or annoying warnings, most Volvo and Infiniti owners use crash avoidance systems most of the time. Among early adopters, the first requirement of effective warning systems (that owners use the technology) seems largely met. Systems requiring activation by drivers for each trip are used less often. Owner experience with the latest technologies from other automobile manufacturers should be studied, as well as for vehicles on which technologies are standard (versus optional) equipment. The effectiveness of technologies in preventing and mitigating crashes and injuries, and user acceptance of interfaces, should be

Modern SQL and NoSQL database technologies for the ATLAS experiment

CERN Document Server

Barberis, Dario; The ATLAS collaboration

2017-01-01

Structured data storage technologies evolve very rapidly in the IT world. LHC experiments, and ATLAS in particular, try to select and use these technologies balancing the performance for a given set of use cases with the availability, ease of use and of getting support, and stability of the product. We definitely and definitively moved from the “one fits all” (or “all has to fit into one”) paradigm to choosing the best solution for each group of data and for the applications that use these data. This paper describes the solutions in use, or under study, for the ATLAS experiment and their selection process and performance measurements.

Modern SQL and NoSQL database technologies for the ATLAS experiment

CERN Document Server

Barberis, Dario; The ATLAS collaboration

2017-01-01

Structured data storage technologies evolve very rapidly in the IT world. LHC experiments, and ATLAS in particular, try to select and use these technologies balancing the performance for a given set of use cases with the availability, ease of use and of getting support, and stability of the product. We definitely and definitively moved from the “one fits all” (or “all has to fit into one”) paradigm to choosing the best solution for each group of data and for the applications that use these data. This talk describes the solutions in use, or under study, for the ATLAS experiment and their selection process and performance.

Sensor Technologies on Flexible Substrates

Science.gov (United States)

Koehne, Jessica

2016-01-01

NASA Ames has developed sensor technologies on flexible substrates integrated into textiles for personalized environment monitoring and human performance evaluation. Current technologies include chemical sensing for gas leak and event monitoring and biological sensors for human health and performance monitoring. Targeted integration include next generation EVA suits and flexible habitats.

HPC Benchmark Suite NMx, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Intelligent Automation Inc., (IAI) and University of Central Florida (UCF) propose to develop a comprehensive numerical test suite for benchmarking current and...

Inherent work suit buoyancy distribution: effects on lifejacket self-righting performance.

Science.gov (United States)

Barwood, Martin J; Long, Geoffrey M; Lunt, Heather; Tipton, Michael J

2014-09-01

Accidental immersion in cold water is an occupational risk. Work suits and life jackets (LJ) should work effectively in combination to keep the airway clear of the water (freeboard) and enable self-righting. We hypothesized that inherent buoyancy, in the suit or LJ, would be beneficial for enabling freeboard, but its distribution may influence LJ self-righting. Six participants consented to complete nine immersions. Suits and LJ tested were: flotation suit (FLOAT; 85 N inherent buoyancy); oilskins 1 (OS-1) and 2 (OS-2), both with no inherent buoyancy; LJs (inherent buoyancy/buoyancy after inflation/total buoyancy), LJ-1 50/150/200 N, LJ-2 0/290/290 N, LJ-3 80/190/270 N. Once dressed, the subject entered an immersion pool where uninflated freeboard, self-righting performance, and inflated freeboard were measured. Data were compared using Friedman's test to the 0.05 alpha level. All suits and LJs enabled uninflated and inflated freeboard, but differences were seen between the suits and LJs. Self-righting was achieved on 43 of 54 occasions, irrespective of suit or LJ. On all occasions that self-righting was not achieved, this occurred in an LJ that included inherent buoyancy (11/54 occasions). Of these 11 failures, 8 occurred (73% of occasions) when the FLOAT suit was being worn. LJs that included inherent buoyancy, that are certified as effective on their own, worked less effectively from the perspective of self-righting in combination with a work suit that also included inherent buoyancy. Equipment that is approved for use in the workplace should be tested in combination to ensure adequate performance in an emergency scenario.

Oracle E-Business Suite Financials R12 A Functionality Guide

CERN Document Server

Iyer, Mohan

2012-01-01

This is a step-by-step functional guide to get you started easily with Oracle EBS Financials. If you are an Oracle E-Business Suite Financial consultant or an administrator looking to get a quick review on the capabilities of Oracle E-Business Suite and improve the use of the systems functionality, then this is the best guide for you. This book assumes that you have a fundamental knowledge of EBS Suite.

μ-'Diving suit' for liquid-phase high-Q resonant detection.

Science.gov (United States)

Yu, Haitao; Chen, Ying; Xu, Pengcheng; Xu, Tiegang; Bao, Yuyang; Li, Xinxin

2016-03-07

A resonant cantilever sensor is, for the first time, dressed in a water-proof 'diving suit' for real-time bio/chemical detection in liquid. The μ-'diving suit' technology can effectively avoid not only unsustainable resonance due to heavy liquid-damping, but also inevitable nonspecific adsorption on the cantilever body. Such a novel technology ensures long-time high-Q resonance of the cantilever in solution environment for real-time trace-concentration bio/chemical detection and analysis. After the formation of the integrated resonant micro-cantilever, a patterned photoresist and hydrophobic parylene thin-film are sequentially formed on top of the cantilever as sacrificial layer and water-proof coat, respectively. After sacrificial-layer release, an air gap is formed between the parylene coat and the cantilever to protect the resonant cantilever from heavy liquid damping effect. Only a small sensing-pool area, located at the cantilever free-end and locally coated with specific sensing-material, is exposed to the liquid analyte for gravimetric detection. The specifically adsorbed analyte mass can be real-time detected by recording the frequency-shift signal. In order to secure vibration movement of the cantilever and, simultaneously, reject liquid leakage from the sensing-pool region, a hydrophobic parylene made narrow slit structure is designed surrounding the sensing-pool. The anti-leakage effect of the narrow slit and damping limited resonance Q-factor are modelled and optimally designed. Integrated with electro-thermal resonance excitation and piezoresistive frequency readout, the cantilever is embedded in a micro-fluidic chip to form a lab-chip micro-system for liquid-phase bio/chemical detection. Experimental results show the Q-factor of 23 in water and longer than 20 hours liquid-phase continuous working time. Loaded with two kinds of sensing-materials at the sensing-pools, two types of sensing chips successfully show real-time liquid-phase detection to ppb

HPC Benchmark Suite NMx, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — In the phase II effort, Intelligent Automation Inc., (IAI) and University of Central Florida (UCF) propose to develop a comprehensive numerical test suite for...

Cosmonaut Sergei Krikalev receives assistance from suit technician

Science.gov (United States)

1994-01-01

Sergei Krikalev, alternative mission specialist for STS-63, gets help from Dawn Mays, a Boeing suit technician. The cosmonaut was about to participate in a training session at JSC's Weightless Environment Training Facility (WETF). Wearing the training version of the extravehicular mobility unit (EMU) space suit, weighted to allow neutral buoyancy in the 25 feet deep WETF pool, Krikalev minutes later was underwater simulating a contingency spacewalk, or extravehicular activity (EVA).

The antigravity suit in neurosurgery. Cardiovascular responses in seated neurosurgical patients.

Science.gov (United States)

Brodrick, P M; Ingram, G S

1988-09-01

The haemodynamic responses associated with inflation of the antigravity suit (G suit, aviation type) to 8.0 kPa were studied in a series of 40 patients who underwent neurosurgical operations in the sitting position. The study showed statistically significant increases in systolic arterial pressure (p less than 0.005) and mean central venous pressure (p less than 0.001) with inflation of the suit. The systolic arterial and mean central venous pressures remained significantly elevated immediately before deflation of the suit at the end of the operation (p less than 0.001 and p less than 0.005 respectively). The addition of 0.8-1.0 kPa positive end expiratory pressure during suit inflation was also investigated. A further increase in central venous pressure occurred but this did not achieve statistical significance.

Wireless Technology in the Library: The RIT Experience: Overview of the Project.

Science.gov (United States)

Pitkin, Pat

2001-01-01

Provides an overview of a project at RIT (Rochester Institute of Technology) that experimented with wireless technology, including laptop computers that circulate within the library building. Discusses project requirements, including ease of use, low maintenance, and low cost; motivation, including mobility; implementation; and benefits to the…

Embodied Experiences of Place: A Study of History Learning with Mobile Technologies

Science.gov (United States)

Price, S.; Jewitt, C.; Sakr, M.

2016-01-01

This paper reports an empirical study that takes a multimodal analytical approach to examine how mobile technologies shape students' exploration and experience of place during a history learning activity in situ. In history education, mobile technologies provide opportunities for authentic experiential learning activities that have the potential…

Characterization of the Radiation Shielding Properties of US and Russian EVA Suits

International Nuclear Information System (INIS)

Benton, E.R.; Benton, E.V.; Frank, A.L.

2001-01-01

Reported herein are results from the Eril Research, Inc. (ERI) participation in the NASA Johnson Space Center sponsored study characterizing the radiation shielding properties of the two types of space suit that astronauts are wearing during the EVA on-orbit assembly of the International Space Station (ISS). Measurements using passive detectors were carried out to assess the shielding properties of the USEMU Suit and the Russian Orlan-M suit during irradiations of the suits and a tissue equivalent phantom to monoenergetic proton and electron beams at the Loma Linda University Medical Center (LLUMC). During irradiations of 6 MeV electrons and 60 MeV protons, absorbed dose as a function of depth was measured using TLDs exposed behind swatches of the two suit materials and inside the two EVA helmets. Considerable reduction in electron dose was measured behind all suit materials in exposures to 6MeV electrons. Slowing of the proton beam in the suit materials led to an increase in dose measured in exposures to 60 MeV protons. During 232 MeV proton irradiations, measurements were made with TLDs and CR-39 PNTDs at five organ locations inside a tissue equivalent phantom, exposed both with and without the two EVA suits. The EVA helmets produce a 13 to 27 percent reduction in total dose and a 0 to 25 percent reduction in dose equivalent when compared to measurements made in the phantom head alone. Differences in dose and dose equivalent between the suit and non-suit irradiations for the lower portions of the two EVA suits tended to be smaller. Proton-induced target fragmentation was found to be a significant source of increased dose equivalent, especially within the two EVA helmets, and average quality factor inside the EMU and Orlan-M helmets was 2 to 14 percent greater than that measured in the bare phantom head

Critical Technology Determination for Future Human Space Flight

Science.gov (United States)

Mercer, Carolyn R.; Vangen, Scott D.; Williams-Byrd, Julie A.; Stecklein, Jonette M.; Rahman, Shamim A.; Rosenthal, Matthew E.; Hornyak, David M.; Alexander, Leslie; Korsmeyer, David J.; Tu, Eugene L.;

Vehicle-network defensive aids suite

Science.gov (United States)

Rapanotti, John

2005-05-01

Defensive Aids Suites (DAS) developed for vehicles can be extended to the vehicle network level. The vehicle network, typically comprising four platoon vehicles, will benefit from improved communications and automation based on low latency response to threats from a flexible, dynamic, self-healing network environment. Improved DAS performance and reliability relies on four complementary sensor technologies including: acoustics, visible and infrared optics, laser detection and radar. Long-range passive threat detection and avoidance is based on dual-purpose optics, primarily designed for manoeuvring, targeting and surveillance, combined with dazzling, obscuration and countermanoeuvres. Short-range active armour is based on search and track radar and intercepting grenades to defeat the threat. Acoustic threat detection increases the overall robustness of the DAS and extends the detection range to include small calibers. Finally, detection of active targeting systems is carried out with laser and radar warning receivers. Synthetic scene generation will provide the integrated environment needed to investigate, develop and validate these new capabilities. Computer generated imagery, based on validated models and an acceptable set of benchmark vignettes, can be used to investigate and develop fieldable sensors driven by real-time algorithms and countermeasure strategies. The synthetic scene environment will be suitable for sensor and countermeasure development in hardware-in-the-loop simulation. The research effort focuses on two key technical areas: a) computing aspects of the synthetic scene generation and b) and development of adapted models and databases. OneSAF is being developed for research and development, in addition to the original requirement of Simulation and Modelling for Acquisition, Rehearsal, Requirements and Training (SMARRT), and is becoming useful as a means for transferring technology to other users, researchers and contractors. This procedure

A BMI-based occupational therapy assist suit: asynchronous control by SSVEP.

Science.gov (United States)

Sakurada, Takeshi; Kawase, Toshihiro; Takano, Kouji; Komatsu, Tomoaki; Kansaku, Kenji

2013-01-01

A brain-machine interface (BMI) is an interface technology that uses neurophysiological signals from the brain to control external machines. Recent invasive BMI technologies have succeeded in the asynchronous control of robot arms for a useful series of actions, such as reaching and grasping. In this study, we developed non-invasive BMI technologies aiming to make such useful movements using the subject's own hands by preparing a BMI-based occupational therapy assist suit (BOTAS). We prepared a pre-recorded series of useful actions-a grasping-a-ball movement and a carrying-the-ball movement-and added asynchronous control using steady-state visual evoked potential (SSVEP) signals. A SSVEP signal was used to trigger the grasping-a-ball movement and another SSVEP signal was used to trigger the carrying-the-ball movement. A support vector machine was used to classify EEG signals recorded from the visual cortex (Oz) in real time. Untrained, able-bodied participants (n = 12) operated the system successfully. Classification accuracy and time required for SSVEP detection were ~88% and 3 s, respectively. We further recruited three patients with upper cervical spinal cord injuries (SCIs); they also succeeded in operating the system without training. These data suggest that our BOTAS system is potentially useful in terms of rehabilitation of patients with upper limb disabilities.

Definition of common support equipment and space station interface requirements for IOC model technology experiments

Science.gov (United States)

Russell, Richard A.; Waiss, Richard D.

1988-01-01

A study was conducted to identify the common support equipment and Space Station interface requirements for the IOC (initial operating capabilities) model technology experiments. In particular, each principal investigator for the proposed model technology experiment was contacted and visited for technical understanding and support for the generation of the detailed technical backup data required for completion of this study. Based on the data generated, a strong case can be made for a dedicated technology experiment command and control work station consisting of a command keyboard, cathode ray tube, data processing and storage, and an alert/annunciator panel located in the pressurized laboratory.

Advanced Reactor Licensing: Experience with Digital I&C Technology in Evolutionary Plants

Energy Technology Data Exchange (ETDEWEB)

Wood, RT

2004-09-27

This report presents the findings from a study of experience with digital instrumentation and controls (I&C) technology in evolutionary nuclear power plants. In particular, this study evaluated regulatory approaches employed by the international nuclear power community for licensing advanced l&C systems and identified lessons learned. The report (1) gives an overview of the modern l&C technologies employed at numerous evolutionary nuclear power plants, (2) identifies performance experience derived from those applications, (3) discusses regulatory processes employed and issues that have arisen, (4) captures lessons learned from performance and regulatory experience, (5) suggests anticipated issues that may arise from international near-term deployment of reactor concepts, and (6) offers conclusions and recommendations for potential activities to support advanced reactor licensing in the United States.

Technology for the Next-Generation-Mobile User Experience

Science.gov (United States)

Delagi, Greg

The current mobile-handset market is a vital and growing one, being driven by technology advances, including increased bandwidth and processing performance, as well as reduced power consumption and improved screen technologies. The 3G/4G handsets of today are multimedia internet devices with increased screen size, HD video and gaming, interactive touch screens, HD camera and camcorders, as well as incredible social, entertainment, and productivity applications. While mobile-technology advancements to date have made us more social in many ways, new advancements over the next decade will bring us to the next level, allowing mobile users to experience new types of "virtual" social interactions with all the senses. The mobile handsets of the future will be smart autonomous-lifestyle devices with a multitude of incorporated sensors, applications and display options, all designed to make your life easier and more productive! With future display media, including 3D imaging, virtual interaction and conferencing will be possible, making every call feel like you are in the same room, providing an experience far beyond today's video conferencing technology. 3D touch-screen with integrated image-projection technologies will work in conjunction with gesturing to bring a new era of intuitive mobile device applications, interaction, and information sharing. Looking to the future, there are many challenges to be faced in delivering a smart mobile companion device that will meet the user demands. One demand will be for the availability of new and compelling services, and features on the "mobile companion". These mobile companions will be more than just Internet devices, and will function as on-the-go workstations, allowing users to function as if they were sitting in front of their computer in the office or at home. The massive amounts of data that will be transmitted through, to and from these mobile companions will require immense improvements in system performance, including

Technology choices for the Integrated Beam Experiment (IBX)

Energy Technology Data Exchange (ETDEWEB)

Leitner, M.A.; Celata, C.M.; Lee, E.P.; Sabbi, G.; Waldron, W.L.; Barnard, J.J.

2002-10-31

Over the next three years the research program of the Heavy Ion Fusion Virtual National Laboratory (HIF-VNL), a collaboration among LBNL, LLNL, and PPPL, is focused on separate scientific experiments in the injection, transport and focusing of intense heavy ion beams at currents from 100 mA to 1 A. As a next major step in the HIF-VNL program, we aim for a complete ''source-to-target'' experiment, the Integrated Beam Experiment (IBX). By combining the experience gained in the current separate beam experiments IBX would allow the integrated scientific study of the evolution of a single heavy ion beam at high current ({approx}1 A) through all sections of a possible heavy ion fusion accelerator: the injection, acceleration, compression, and beam focusing. This paper describes the main parameters and technology choices of the planned IBX experiment. IBX will accelerate singly charged potassium or argon ion beams up to 10 MeV final energy and a longitudinal beam compression ratio of 10, resulting in a beam current at target of more than 10 Amperes. Different accelerator cell design options are described in detail: Induction cores incorporating either room temperature pulsed focusing-magnets or superconducting magnets.

Incremental Approach to the Technology of Test Design for Industrial Projects

Directory of Open Access Journals (Sweden)

P. D. Drobintsev

2014-01-01

Full Text Available The paper presents an approach to effort reduction in developing test suites for industrial software products based on the incremental technology. The main problems to be solved by the incremental technology are full automation design of test scenarios and significant reducing of test explosion. The proposed approach provides solutions to the mentioned problems through joint co-working of a designer and a customer, through the integration of symbolic verification with the automatic generation of test suites; through the usage of an efficient technology with the toolset VRS/TAT.

ANALYSIS OF DESIGN ELEMENTS IN SKI SUITS

Directory of Open Access Journals (Sweden)

Birsen Çileroğlu

2014-06-01

Full Text Available Popularity of Ski Sport in 19th century necessitated a new perspective on protective skiing clothing ag ainst the mountain climates and excessive cold. Winter clothing were the basis of ski attire during this period. By the beginning of 20th century lining cloth were used to minimize the wind effect. The difference between the men and women’s ski attire of the time consisted of a knee - length skirts worn over the golf trousers. Subsequent to the First World War, skiing suit models were influenced by the period uniforms and the producers reflected the fashion trends to the ski clothing. In conformance with th e prevailing trends, ski trousers were designed and produced for the women thus leading to reduction in gender differences. Increases in the ski tourism and holding of the first winter olympics in 1924 resulted in variations in ski attires, development of design characteristics, growth in user numbers, and enlargement of production capacities. Designers emphasized in their collections combined presence of elegance and practicality in the skiing attire. In 1930s, the ski suits influenced by pilots’ uniforms included characteristics permitting freedom of motion, and the design elements exhibited changes in terms of style, material and aerodynamics. In time, the ski attires showed varying design features distinguishing professionals from the amateurs. While protective functionality was primary consideration for the amateurs, for professionals the aerodynamic design was also a leading factor. Eventually, the increased differences in design characteristics were exhibited in ski suit collections, World reknown brands were formed, production and sales volumes showed significant rise. During 20th century the ski suits influenced by fashion trends to acquire unique styles reached a position of dominance to impact current fashion trends, and apart from sports attir es they became a style determinant in the clothing of cold climates. Ski suits

1981 Annual Status Report: thermonuclear fusion technology

International Nuclear Information System (INIS)

1982-01-01

The work perfomed on 1981 concerns four projects, namely: - The project 1: ''Reactor Studies''. During 1981 this activity was made in support to the European participation to the INTOR (INternational TOkamak Reactor) studies. This represents a collaborative effort among Europe, Japan; USA and USSR, under the auspices of IAEA, to design a major fusion experiment beyond the upcoming generation of large tokamaks. - The Project 2: ''Blanket Technology'' has the aim to investigate the behaviour of blanket materials in fusion conditions. - The Project 3: ''Materials Sorting and Development'' has the aim to assess the mechanical properties and radiation damage of standard and advanced materials suited for structures, in particular for application as first wall of the fusion reactors. - The Project 4: ''Cyclotron Operation and Experiments'' has the task to exploit a cyclotron to simulate radiation damages to materials in a fusion ambient

Wireless Wearable Multisensory Suite and Real-Time Prediction of Obstructive Sleep Apnea Episodes.

Science.gov (United States)

Le, Trung Q; Cheng, Changqing; Sangasoongsong, Akkarapol; Wongdhamma, Woranat; Bukkapatnam, Satish T S

2013-01-01

Obstructive sleep apnea (OSA) is a common sleep disorder found in 24% of adult men and 9% of adult women. Although continuous positive airway pressure (CPAP) has emerged as a standard therapy for OSA, a majority of patients are not tolerant to this treatment, largely because of the uncomfortable nasal air delivery during their sleep. Recent advances in wireless communication and advanced ("bigdata") preditive analytics technologies offer radically new point-of-care treatment approaches for OSA episodes with unprecedented comfort and afforadability. We introduce a Dirichlet process-based mixture Gaussian process (DPMG) model to predict the onset of sleep apnea episodes based on analyzing complex cardiorespiratory signals gathered from a custom-designed wireless wearable multisensory suite. Extensive testing with signals from the multisensory suite as well as PhysioNet's OSA database suggests that the accuracy of offline OSA classification is 88%, and accuracy for predicting an OSA episode 1-min ahead is 83% and 3-min ahead is 77%. Such accurate prediction of an impending OSA episode can be used to adaptively adjust CPAP airflow (toward improving the patient's adherence) or the torso posture (e.g., minor chin adjustments to maintain steady levels of the airflow).

Strauss: Der Rosenkavalier - Suite / Michael Kennedy

Index Scriptorium Estoniae

Kennedy, Michael

1990-01-01

Uuest heliplaadist "Strauss: Der Rosenkavalier - Suite, Salome-Dance of the seven veils, Capriccio-Prelude, Intermezzo, Morgen Mittag um elf! Felicity Lott, Scottish National Orchestra, Neeme Järvi" Chandos ABRD 1397. ABTD 1397. CHAN 8758

Experience in Use of Project Method during Technology Lessons in Secondary Schools of the USA

Science.gov (United States)

Sheludko, Inna

2015-01-01

The article examines the opportunities and prospects for the use of experience of project method during "technology lessons" in US secondary schools, since the value of project technology implementation experience into the educational process in the USA for ensuring holistic development of children, preparing them for adult life, in…

Animation, embodiment, and digital media human experience of technological liveliness

CERN Document Server

Chow, K

2013-01-01

Animation, Embodiment and Digital Media articulates the human experience of technology-mediated animated phenomena in terms of sensory perception, bodily action and imaginative interpretation, suggesting a new theoretical framework with analyses of exemplary user interfaces, video games and interactive artworks.

Real-time fluoroscopic needle guidance in the interventional radiology suite using navigational software for percutaneous bone biopsies in children

Energy Technology Data Exchange (ETDEWEB)

Shellikeri, Sphoorti; Srinivasan, Abhay; Krishnamurthy, Ganesh; Vatsky, Seth; Zhu, Xiaowei; Keller, Marc S.; Cahill, Anne Marie [The Children' s Hospital of Philadelphia, Department of Radiology, Philadelphia, PA (United States); Setser, Randolph M. [Siemens Medical Solutions USA, Inc., Hoffman Estates, IL (United States); Hwang, Tiffany J. [University of Southern California, Keck School of Medicine, Los Angeles, CA (United States); Girard, Erin [Siemens Medical Solutions USA, Inc., Princeton, NJ (United States)

2017-07-15

.005). In our experience, navigational software technology in the IR suite is a promising alternative to CT guidance for pediatric bone biopsies providing comparable technical success and diagnostic accuracy with lower radiation dose and procedure time, in addition to providing real-time fluoroscopic needle guidance. (orig.)

Coupled Human-Space Suit Mobility Studies

Data.gov (United States)

National Aeronautics and Space Administration — Current EVA mobility studies only allow for comparisons of how the suit moves when actuated by a human and how the human moves when unsuited. There are now new...

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

Energy Technology Data Exchange (ETDEWEB)

M.A. Ebadian

1999-09-30

The Princeton Plasma Physics Laboratory (PPPL) demonstration of the diamond wire cutting technology on the surrogate of the Tokamak Fusion Test Reactor (TFTR), Figure 1, was performed from August 23-September 3, 1999. The plated diamond wire, Figure 2, was successful in cutting through all components of the TFTR surrogate including stainless steel, inconel and graphite. The demonstration tested three different void fill materials (mortar with sand, Rheocell-15, and foam) and three cooling systems (water, air, and liquid nitrogen). The optimum combination was determined to be the use of the low-density concrete void fill, Rheocell-15 with an average density of 52 lbs/ft{sup 3}, using a water coolant. However, the liquid nitrogen performed better than expected with only minor problems and was considered to be a successful demonstration of the Bluegrass Concrete Cutting, Inc. proprietary liquid-nitrogen coolant system. Data from the demonstration is being calculated and a summary of the technology demonstration will be included in the October monthly report. An ITSR will be written comparing the diamond wire saw to the plasma arc (baseline) technology. The MTR Chemical Protective Suit, a proprietary new suit from Kimberly Clark, was evaluated from 8/9/99 to 8/12/99 at Beaver, WV. This particular suit was tested on subjects performing three different tasks: climbing through a horizontal confined space, vertical confined space (pit), and loading and unloading material using a wheel barrow. Multiple test subjects performed each task for 20 minutes each. Performance of the innovative suit was compared to two commonly used types of protective clothing. Vital statistics, including body temperature and heart rate, were continuously monitored and recorded by an authorized physician. A summary of the demonstration will be included in the October monthly report. Along with the MTR Chemical Protective Suit, the VitalSense{trademark} Telemetric Monitoring System from Mini Mitter

Space Suit Performance: Methods for Changing the Quality of Quantitative Data

Science.gov (United States)

Cowley, Matthew; Benson, Elizabeth; Rajulu, Sudhakar

2014-01-01

NASA is currently designing a new space suit capable of working in deep space and on Mars. Designing a suit is very difficult and often requires trade-offs between performance, cost, mass, and system complexity. To verify that new suits will enable astronauts to perform to their maximum capacity, prototype suits must be built and tested with human subjects. However, engineers and flight surgeons often have difficulty understanding and applying traditional representations of human data without training. To overcome these challenges, NASA is developing modern simulation and analysis techniques that focus on 3D visualization. Early understanding of actual performance early on in the design cycle is extremely advantageous to increase performance capabilities, reduce the risk of injury, and reduce costs. The primary objective of this project was to test modern simulation and analysis techniques for evaluating the performance of a human operating in extra-vehicular space suits.

ACR-700 advanced technologies

International Nuclear Information System (INIS)

Tapping, R.L.; Turner, C.W.; Yu, S.K.W.; Olmstead, R.; Speranzini, R.A.

2004-01-01

A successful advanced reactor plant will have optimized economics including reduced operating and maintenance costs, improved performance, and enhanced safety. Incorporating improvements based on advanced technologies ensures cost, safety and operational competitiveness of the ACR-700. These advanced technologies include modern configuration management; construction technologies; operational technology for the control centre and information systems for plant monitoring and analysis. This paper summarizes the advanced technologies used to achieve construction and operational improvements to enhance plant economic competitiveness, advances in the operational technology used for reactor control, and presents the development of the Smart CANDU suite of tools and its application to existing operating reactors and to the ACR-700. (author)

An improved air-supplied plastic suit for protection against tritium

International Nuclear Information System (INIS)

Wiernicki, C.

1987-01-01

A newly developed Saran/CPE plastic suit material is described which offers significantly better protection against HTO penetration and permeation than the 12-mil PVC currently used at SRP and most other DOE and commercial sites where tritium and HTO are exposure hazards. Tritium breakthrough time is an important parameter when evaluating the applicability of protective clothing; previously published tritium permeation tests did not measure this parameter. Future studies should quantify steady-state permeation rate and breakthrough time to more fully evaluate potential tritium protective clothing. Saran/CPE has successfully been fabricated into a plastic suit because, in addition to its superior tritium resistance, it has all the characteristics required to construct a rugged, dependable, and comfortable suit. The use of the Saran/CPE suit at SRP reactor and tritium production facilities should be a major contribution to the site As Low As Reasonably Achievable program. Both Saran/CPE have demonstrated excellent resistance to a wide range of chemical contaminants; therefore, this suit material may have applications in the general chemical industry and hazardous waste site cleanup operations. 4 refs., 3 figs., 1 tab

Driving Simulator Based Interactive Experiments : Understanding Driver Behavior, Cognition and Technology Uptake under Information and Communication Technologies

Science.gov (United States)

2018-01-31

Advanced Traveler Information Systems (ATIS) and in-vehicle information systems (IVIS) are becoming an integral part of the current driving experience. Although information through in-vehicle technologies provides assistance to drivers with diverse t...

The vTAS suite: A simulator for classical and multiplexed three-axis neutron spectrometers

International Nuclear Information System (INIS)

Boehm, M.; Filhol, A.; Raoul, Y.; Kulda, J.; Schmidt, W.; Schmalzl, K.; Farhi, E.

2013-01-01

The vTAS suite provides graphical assistance to prepare and perform inelastic neutron scattering experiments on a TAS instrument, including latest multiplexed instrumental configurations, such as FlatCone, IMPS and UFO. The interactive display allows for flexible translation between instrument positions in real space and neutron scattering conditions represented in reciprocal space. It is a platform independent public domain software tool, available for download from the website of the Institut Laue Langevin (ILL).

Philosophies Applied in the Selection of Space Suit Joint Range of Motion Requirements

Science.gov (United States)

Aitchison, Lindsway; Ross, Amy; Matty, Jennifer

2009-01-01

Space suits are the most important tool for astronauts working in harsh space and planetary environments; suits keep crewmembers alive and allow them to perform exploration, construction, and scientific tasks on a routine basis over a period of several months. The efficiency with which the tasks are performed is largely dictated by the mobility features of the space suit. For previous space suit development programs, the mobility requirements were written as pure functional mobility requirements that did not separate joint ranges of motion from the joint torques. The Constellation Space Suit Element has the goal to make more quantitative mobility requirements that focused on the individual components of mobility to enable future suit designers to build and test systems more effectively. This paper details the test planning and selection process for the Constellation space suit pressure garment range of motion requirements.

Experience, Adoption, and Technology: Exploring the Phenomenological Experiences of Faculty Involved in Online Teaching at One School of Public Health

Science.gov (United States)

Kidd, Terry; Davis, Trina; Larke, Patricia

2016-01-01

Using the Unified Theory of Acceptance and Use of Technology (UTAUT) and Dewey's Theory of Experience, this phenomenological study explored the experiences of faculty who engaged in online teaching at one school of public health. Findings revealed that the experiences of public health faculty, who engaged in online teaching, are similar and…

Practical experiences of, and lessons learnt from, Internet technologies in higher education

Directory of Open Access Journals (Sweden)

Simon Polovina

1999-01-01

Full Text Available The paper addresses how the Internet as computer-mediated communication is affecting teaching and learning in higher education institutions, particularly as these institutions face increasing competition due to the emergence of Web-based collaboration and assessment technologies. London’s South Bank University (SBU, a typical modern-day higher education institution is thereby in the process of integrating Internet technologies into its conventional and distance learning programmes. From its practical experiences so far SBU has learnt a variety of valuable lessons. In particular the technical and social aspects that determine the choice and use of the most appropriate software tools were identified, as well as a new approach towards online (Internet / Web subject reference sources was outlined. From SBU’s anecdotal experiences, useful recommendations are made for the effective use of Internet technologies that applies to many higher educational institutions.

Development of a Fan for Future Space Suit Applications

Science.gov (United States)

Paul. Heather L.; Converse, David; Dionne, Steven; Moser, Jeff

2010-01-01

NASA's next generation space suit system will place new demands on the fan used to circulate breathing gas through the ventilation loop of the portable life support system. Long duration missions with frequent extravehicular activities (EVAs), the requirement for significant increases in reliability and durability, and a mission profile that imposes strict limits on weight, volume and power create the basis for a set of requirements that demand more performance than is available from existing fan designs. This paper describes the development of a new fan to meet these needs. A centrifugal fan was designed with a normal operating speed of approximately 39,400 rpm to meet the ventilation flow requirements while also meeting the aggressive minimal packaging, weight and power requirements. The prototype fan also operates at 56,000 rpm to satisfy a second operating condition associated with a single fan providing ventilation flow to two spacesuits connected in series. This fan incorporates a novel nonmetallic "can" to keep the oxygen flow separate from the motor electronics, thus eliminating ignition potential. The nonmetallic can enables a small package size and low power consumption. To keep cost and schedule within project bounds a commercial motor controller was used. The fan design has been detailed and implemented using materials and approaches selected to address anticipated mission needs. Test data is presented to show how this fan performs relative to anticipated ventilation requirements for the EVA portable life support system. Additionally, data is presented to show tolerance to anticipated environmental factors such as acoustics, shock, and vibration. Recommendations for forward work to progress the technology readiness level and prepare the fan for the next EVA space suit system are also discussed.

Forecasting the experience of future entertainment technology: “Interactive Storytelling” and media enjoyment

NARCIS (Netherlands)

Klimmt, C.; Roth, C.; Vermeulen, I.E.; Vorderer, P.A.; Roth, F.S.

2012-01-01

Advances in gaming and other entertainment technologies are evolving rapidly and create new conceptual challenges for understanding and explaining the user experiences they can facilitate. The present article reports a prospective study on a particularly promising entertainment technology of the

SECIMTools: a suite of metabolomics data analysis tools.

Science.gov (United States)

Kirpich, Alexander S; Ibarra, Miguel; Moskalenko, Oleksandr; Fear, Justin M; Gerken, Joseph; Mi, Xinlei; Ashrafi, Ali; Morse, Alison M; McIntyre, Lauren M

2018-04-20

Metabolomics has the promise to transform the area of personalized medicine with the rapid development of high throughput technology for untargeted analysis of metabolites. Open access, easy to use, analytic tools that are broadly accessible to the biological community need to be developed. While technology used in metabolomics varies, most metabolomics studies have a set of features identified. Galaxy is an open access platform that enables scientists at all levels to interact with big data. Galaxy promotes reproducibility by saving histories and enabling the sharing workflows among scientists. SECIMTools (SouthEast Center for Integrated Metabolomics) is a set of Python applications that are available both as standalone tools and wrapped for use in Galaxy. The suite includes a comprehensive set of quality control metrics (retention time window evaluation and various peak evaluation tools), visualization techniques (hierarchical cluster heatmap, principal component analysis, modular modularity clustering), basic statistical analysis methods (partial least squares - discriminant analysis, analysis of variance, t-test, Kruskal-Wallis non-parametric test), advanced classification methods (random forest, support vector machines), and advanced variable selection tools (least absolute shrinkage and selection operator LASSO and Elastic Net). SECIMTools leverages the Galaxy platform and enables integrated workflows for metabolomics data analysis made from building blocks designed for easy use and interpretability. Standard data formats and a set of utilities allow arbitrary linkages between tools to encourage novel workflow designs. The Galaxy framework enables future data integration for metabolomics studies with other omics data.

The Role of KREEP in the Production of Mg-Suite Magmas and Its Influence on the Extent of Mg-Suite Magmatism in the Lunar Crust

Science.gov (United States)

Elardo, S. M.; Shearer, C. K.; McCubbin, F. M.

2017-01-01

The lunar magnesian-suite, or Mg-suite, is a series of ancient plutonic rocks from the lunar crust. They have received a considerable amount of attention from lunar scientists since their discovery for three primary reasons: 1) their ages and geochemistry indicate they represent pristine magmatic samples that crystallized very soon after the formation of the Moon; 2) their ages often overlap with ages of the ferroan anorthosite (FAN) crust; and 3) planetary-scale processes are needed in formation models to account for their unique geochemical features. Taken as a whole, the Mg-suite samples, as magmatic cumulate rocks, approximate a fractional crystallization sequence in the low-pressure forsterite-anorthite-silica system, and thus these samples are generally thought to be derived from layered mafic intrusions which crystallized very slowly from magmas that intruded the anorthositic crust. However, no direct linkages have been established between different Mg-suite samples based either on field relationships or geochemistry.The model for the origin of the Mg-suite, which best fits the limited available data, is one where Mg-suite magmas form from melting of a hybrid cumulate package consisting of deep mantle dunite, crustal anorthosite, and KREEP (potassium-rare earth elements-phosphorus) at the base of the crust under the Procellarum KREEP Terrane (PKT). In this model, these three LMO (Lunar Magma Ocean) cumulate components are brought into close proximity by the cumulate overturn process. Deep mantle dunitic cumulates with an Mg number of approximately 90 rise to the base of the anorthositic crust due to their buoyancy relative to colder, more dense Fe- and Ti-rich cumulates. This hybridized source rock melts to form Mg-suite magmas, saturated in Mg-rich olivine and anorthitic plagioclase, that have a substantial KREEP component.

Explaining experience curves for new energy technologies. A case study of liquefied natural gas

International Nuclear Information System (INIS)

Greaker, Mads; Lund Sagen, Eirik

2008-01-01

Many new energy technologies seem to experience a fall in unit price as they mature. In this paper we study the unit price of liquefying natural gas in order to make it transportable by ship to gas power installations all over the world. Our point of departure is the experience curve approach, however unlike many other studies of new energy technologies, we also seek to account for autonomous technological change, scale effects and the effects of upstream competition among technology suppliers. To our surprise we find that upstream competition is by far the most important factor contributing to the fall in unit price. With respect to the natural gas business, this may have implications for the future development in prices as the effect of increased upstream competition is temporary and likely to weaken a lot sooner than effects from learning and technological change. Another more general policy implication, is that while promoting new energy technologies, governments must not forget to pay attention to competition policy. (author)

Modeling Coronal Mass Ejections with the Multi-Scale Fluid-Kinetic Simulation Suite

International Nuclear Information System (INIS)

Pogorelov, N. V.; Borovikov, S. N.; Wu, S. T.; Yalim, M. S.; Kryukov, I. A.; Colella, P. C.; Van Straalen, B.

2017-01-01

The solar eruptions and interacting solar wind streams are key drivers of geomagnetic storms and various related space weather disturbances that may have hazardous effects on the space-borne and ground-based technological systems as well as on human health. Coronal mass ejections (CMEs) and their interplanetary counterparts, interplanetary CMEs (ICMEs), belong to the strongest disturbances and therefore are of great importance for the space weather predictions. In this paper we show a few examples of how adaptive mesh refinement makes it possible to resolve the complex CME structure and its evolution in time while a CME propagates from the inner boundary to Earth. Simulations are performed with the Multi-Scale Fluid-Kinetic Simulation Suite (MS-FLUKSS). (paper)

Corrections of the NIST Statistical Test Suite for Randomness

OpenAIRE

Kim, Song-Ju; Umeno, Ken; Hasegawa, Akio

2004-01-01

It is well known that the NIST statistical test suite was used for the evaluation of AES candidate algorithms. We have found that the test setting of Discrete Fourier Transform test and Lempel-Ziv test of this test suite are wrong. We give four corrections of mistakes in the test settings. This suggests that re-evaluation of the test results should be needed.

Reliability performance testing of totally encapsulating chemical protective suits

International Nuclear Information System (INIS)

Johnson, J.S.; Swearengen, P.M.

1991-01-01

The need to assure a high degree of reliability for totally encapsulating chemical protective (TECP) suits has been recognized by Lawrence Livermore National Laboratory's (LLNL) Hazards Control Department for some time. The following four tests were proposed as necessary to provide complete evaluation of TECP suit performance: 1. Quantitative leak test (ASTM draft), 2. Worst-case chemical exposure test (conceptual), 3. Pressure leak-rate test (complete, ASTM F1057-87), and 4. Chemical leak-rate test (ASTM draft). This paper reports on these tests which should be applied to measuring TECP suit performance in two stages: design qualification tests and field use tests. Test 1, 2, and 3 are used as design qualification tests, and tests 3 and 4 are used as field use tests

Improvements to the APBS biomolecular solvation software suite.

Science.gov (United States)

Jurrus, Elizabeth; Engel, Dave; Star, Keith; Monson, Kyle; Brandi, Juan; Felberg, Lisa E; Brookes, David H; Wilson, Leighton; Chen, Jiahui; Liles, Karina; Chun, Minju; Li, Peter; Gohara, David W; Dolinsky, Todd; Konecny, Robert; Koes, David R; Nielsen, Jens Erik; Head-Gordon, Teresa; Geng, Weihua; Krasny, Robert; Wei, Guo-Wei; Holst, Michael J; McCammon, J Andrew; Baker, Nathan A

2018-01-01

The Adaptive Poisson-Boltzmann Solver (APBS) software was developed to solve the equations of continuum electrostatics for large biomolecular assemblages that have provided impact in the study of a broad range of chemical, biological, and biomedical applications. APBS addresses the three key technology challenges for understanding solvation and electrostatics in biomedical applications: accurate and efficient models for biomolecular solvation and electrostatics, robust and scalable software for applying those theories to biomolecular systems, and mechanisms for sharing and analyzing biomolecular electrostatics data in the scientific community. To address new research applications and advancing computational capabilities, we have continually updated APBS and its suite of accompanying software since its release in 2001. In this article, we discuss the models and capabilities that have recently been implemented within the APBS software package including a Poisson-Boltzmann analytical and a semi-analytical solver, an optimized boundary element solver, a geometry-based geometric flow solvation model, a graph theory-based algorithm for determining pK a values, and an improved web-based visualization tool for viewing electrostatics. © 2017 The Protein Society.

Using Inertial Sensors in Smartphones for Curriculum Experiments of Inertial Navigation Technology

Directory of Open Access Journals (Sweden)

Xiaoji Niu

2015-03-01

Full Text Available Inertial technology has been used in a wide range of applications such as guidance, navigation, and motion tracking. However, there are few undergraduate courses that focus on the inertial technology. Traditional inertial navigation systems (INS and relevant testing facilities are expensive and complicated in operation, which makes it inconvenient and risky to perform teaching experiments with such systems. To solve this issue, this paper proposes the idea of using smartphones, which are ubiquitous and commonly contain off-the-shelf inertial sensors, as the experimental devices. A series of curriculum experiments are designed, including the Allan variance test, the calibration test, the initial leveling test and the drift feature test. These experiments are well-selected and can be implemented simply with the smartphones and without any other specialized tools. The curriculum syllabus was designed and tentatively carried out on 14 undergraduate students with a science and engineering background. Feedback from the students show that the curriculum can help them gain a comprehensive understanding of the inertial technology such as calibration and modeling of the sensor errors, determination of the device attitude and accumulation of the sensor errors in the navigation algorithm. The use of inertial sensors in smartphones provides the students the first-hand experiences and intuitive feelings about the function of inertial sensors. Moreover, it can motivate students to utilize ubiquitous low-cost sensors in their future research.

Nursing care in a high-technological environment: Experiences of critical care nurses.

Science.gov (United States)

Tunlind, Adam; Granström, John; Engström, Åsa

2015-04-01

Management of technical equipment, such as ventilators, infusion pumps, monitors and dialysis, makes health care in an intensive care setting more complex. Technology can be defined as items, machinery and equipment that are connected to knowledge and management to maximise efficiency. Technology is not only the equipment itself, but also the knowledge of how to use it and the ability to convert it into nursing care. The aim of this study is to describe critical care nurses' experience of performing nursing care in a high technology healthcare environment. Qualitative, personal interviews were conducted during 2012 with eight critical care nurses in the northern part of Sweden. Interview transcripts were analysed using qualitative content analysis. Three themes with six categories emerged. The technology was described as a security that could facilitate nursing care, but also one that could sometimes present obstacles. The importance of using the clinical gaze was highlighted. Nursing care in a high technological environment must be seen as multi-faceted when it comes to how it affects CCNs' experience. The advanced care conducted in an ICU could not function without high-tech equipment, nor could care operate without skilled interpersonal interaction and maintenance of basal nursing. That technology is seen as a major tool and simultaneously as a barrier to patient-centred care. Copyright © 2014 Elsevier Ltd. All rights reserved.

1982 annual status report: thermonuclear fusion technology

International Nuclear Information System (INIS)

1982-01-01

The objective of this programme is to study the technological problems related to ''Post Jet'' experimental machines and, in a longer range, to assess the engineering aspects of Fusion Power Reactor Plants. According to the decision taken by the Council of Ministers on the JRC multiannual programme (1980-1983), the work performed on 1982 concerns four projects, namely: The Project 1: ''Fusion Reactor Studies''concerns mainly the NET (Next European Torus) studies which have been continued in the framework of the European participation to INTOR (INternational TOkamak Reactor). This represents a collaborative effort to design a major fusion experiment beyond the-upcoming generation of large tokamaks. The Project 2: ''Blanket Technology'' has the aim to investigate the behaviour of blanket materials in fusion conditions. The Project 3: ''Materials Sorting and Development'' has the aim to assess the mechanical properties and radiation damage of standard and advanced materials suited for structures, in particular for application as first wall of the fusion reactors. The Project 4: ''Cyclotron Operation and Experiments''has the task to exploit a cyclotron to simulate radiation damages to materials in a fusion ambient

SOFIA Technology: The NASA Airborne Astronomy Ambassador (AAA) Experience and Online Resources

Science.gov (United States)

Clark, C.; Harman, P. K.; Backman, D. E.

2016-12-01

SOFIA, an 80/20 partnership of NASA and the German Aerospace Center (DLR), consists of a modified Boeing 747SP carrying a reflecting telescope with an effective diameter of 2.5 meters. SOFIA is the largest airborne observatory in the world, capable of observations impossible for even the largest and highest ground-based telescopes. The SOFIA Program Office is at NASA ARC, Moffett Field, CA; the aircraft is based in Palmdale, CA. During its planned 20-year lifetime, SOFIA will foster development of new scientific instrumentation and inspire the education of young scientists and engineers. Astrophysicists are awarded time on SOFIA to study many kinds of astronomical objects and phenomena. Among the most interesting are: Star birth, evolution, and death Formation of new planetary systems Chemistry of complex molecules in space Planet and exoplanet atmospheres Galactic gas & dust "ecosystems" Environments around supermassive black holes SOFIA currently has eight instruments, five US-made and three German. The instruments — cameras, spectrometers, and a photometer,— operate at near-, mid- and far-infrared wavelengths, each spectral range being best suited to studying particular celestial phenomena. NASA's Airborne Astronomy Ambassadors' (AAAs) experience includes a STEM immersion component. AAAs are onboard during two overnight SOFIA flights that provide insight into the acquisition of scientific data as well as the interfaces between the telescope, instrument, & aircraft. AAAs monitor system performance and view observation targets from their dedicated workstation during flights. Future opportunities for school district partnerships leading to selection of future AAA cohorts will be offered in 2018-19. AAAs may access public archive data via the SOFIA Data Cycle System (DCS) https://dcs.sofia.usra.edu/. Additional SOFIA science and other resources are available at: www.sofia.usra.edu, including lessons that use photovoltaic circuits, and other technology for the

A BMI-based occupational therapy assist suit: asynchronous control by SSVEP

Directory of Open Access Journals (Sweden)

Takeshi eSakurada

2013-09-01

Full Text Available A brain-machine interface (BMI is an interface technology that uses neurophysiological signals from the brain to control external machines. Recent invasive BMI technologies have succeeded in the asynchronous control of robot arms for a useful series of actions, such as reaching and grasping. In this study, we developed non-invasive BMI technologies aiming to make such useful movements using the subject's own hands by preparing a BMI-based occupational therapy assist suit (BOTAS. We prepared a pre-recorded series of useful actionsa grasping-a-ball movement and a carrying-the-ball movementand added asynchronous control using steady-state visual evoked potential (SSVEP signals. A SSVEP signal was used to trigger the grasping-a-ball movement and another SSVEP signal was used to trigger the carrying-the-ball movement. A support vector machine was used to classify EEG signals recorded from the visual cortex (Oz in real time. Untrained, able-bodied participants (n = 12 operated the system successfully. Classification accuracy and time required for SSVEP detection were approximately 88% and 3 s, respectively. We further recruited three patients with upper cervical spinal cord injuries; they also succeeded in operating the system without training. These data suggest that our BOTAS system is potentially useful in terms of rehabilitation of patients with upper limb disabilities.

The Apollo Number: space suits, self-support, and the walk-run transition.

Directory of Open Access Journals (Sweden)

Christopher E Carr

Full Text Available BACKGROUND: How space suits affect the preferred walk-run transition is an open question with relevance to human biomechanics and planetary extravehicular activity. Walking and running energetics differ; in reduced gravity (<0.5 g, running, unlike on Earth, uses less energy per distance than walking. METHODOLOGY/PRINCIPAL FINDINGS: The walk-run transition (denoted * correlates with the Froude Number (Fr = v(2/gL, velocity v, gravitational acceleration g, leg length L. Human unsuited Fr* is relatively constant (approximately 0.5 with gravity but increases substantially with decreasing gravity below approximately 0.4 g, rising to 0.9 in 1/6 g; space suits appear to lower Fr*. Because of pressure forces, space suits partially (1 g or completely (lunar-g support their own weight. We define the Apollo Number (Ap = Fr/M as an expected invariant of locomotion under manipulations of M, the ratio of human-supported to total transported mass. We hypothesize that for lunar suited conditions Ap* but not Fr* will be near 0.9, because the Apollo Number captures the effect of space suit self-support. We used the Apollo Lunar Surface Journal and other sources to identify 38 gait events during lunar exploration for which we could determine gait type (walk/lope/run and calculate Ap. We estimated the binary transition between walk/lope (0 and run (1, yielding Fr* (0.36+/-0.11, mean+/-95% CI and Ap* (0.68+/-0.20. CONCLUSIONS/SIGNIFICANCE: The Apollo Number explains 60% of the difference between suited and unsuited Fr*, appears to capture in large part the effects of space suits on the walk-run transition, and provides several testable predictions for space suit locomotion and, of increasing relevance here on Earth, exoskeleton locomotion. The knowledge of how space suits affect gait transitions can be used to optimize space suits for use on the Moon and Mars.

Virtual reality simulation training in a high-fidelity procedure suite

DEFF Research Database (Denmark)

Lönn, Lars; Edmond, John J; Marco, Jean

2012-01-01

To assess the face and content validity of a novel, full physics, full procedural, virtual reality simulation housed in a hybrid procedure suite.......To assess the face and content validity of a novel, full physics, full procedural, virtual reality simulation housed in a hybrid procedure suite....

Corporation suit in administrative proceedings - BVerwG, NJW 1981, 362

International Nuclear Information System (INIS)

Skouris, W.

1982-01-01

The above mentioned decisions show that the repeated demand for an admission of the corporation suit has not had much impact on jurisdiction. Still the courts are examining whether the rights of corporations taking action against the executive measures are being infringed by them or not. They do not seem to be willing to admit the enforcement of members' rights or of public interests by means of a corporation suit except in those cases that are already embodied in the law. The latest statement of the administrative courts prove that the administrative procedural law (still) in force does not accept any general law on the conduct of a case on behalf of associations for the protection of their members' rights (egoistic corporation suit), nor does it acknowledge the legitimacy of corporations to see against objective illegalities in official decisions with the intention of reducing deficiencies in the execution (altruistic corporation suit). (orig.) [de

FRHAM-TEX trademark cool suit - OST reference No. 1854. Deactivation and decommissioning focus area

International Nuclear Information System (INIS)

1998-02-01

This paper describes a demonstration project for the FRHAM-TEX Cool Suit trademark manufactured by FRHAM Safety Products. It is a one-piece, disposable, breathable, waterproof coverall designed to permit moisture generated by the wearer to be transmitted outside the suit. The performance of this suit was compared to a Tyvek reg-sign suit as a baseline. The suit is proposed as safety ware for workers at decontamination and decommissioning projects

Feasibility of the iPad as a hub for smart house technology in the elderly; effects of cognition, self-efficacy, and technology experience

Directory of Open Access Journals (Sweden)

Alvseike H

2012-11-01

Full Text Available Hilde Alvseike,1 Kolbjørn Brønnick2,31The Norwegian Centre for Movement Disorders, 2Regional Centre for Clinical Research in Psychosis, Division of Psychiatry, Stavanger University Hospital, Norway; 3The Reading Centre, University of Stavanger, NorwayAbstract: Smart house technology using tablet computers may help older people to master activities of daily living by making it easier to perform daily tasks like controlling lights and indoor temperature throughout the house with a few keystrokes. The aim of this study was to investigate the impact of age, cognition, self-efficacy, and technology experience on the ability of older people to perceive and use iPad tablet computers for this purpose. Twenty-eight participants were interviewed using a structured interview guide and questionnaires, and a practical test of how to use the iPad was performed. The Mini-Mental State Examination (MMSE was used to assess cognition. Cognitive deficits and low self-efficacy significantly reduced the ability of the subjects to use the smart house technology and to perceive the smart house technology service as provided. Age was unrelated to the outcome variables. Finally, technology experience had an effect on technology perception. If further research supports these findings, it should influence smart-house implementation in an elderly population, raising awareness of usability problems in older people with low self-efficacy and cognitive problems.Keywords: smart house technology, iPad, cognition, self-efficacy, technology experience, elderly

Detector technologies for LHC experiments

CERN Document Server

Hansl-Kozanecka, Traudl

1999-01-01

Abstract The Large Hadron Collider (LHC) at CERN will provide proton-proton collisions ata centre-of-mass energy of 14 TeV with a design luminosity of 10^34cm^-2s^-1. The exploitation of the rich physics potential is illustrated using the expected performance of the two general-purpose detectors ATLAS and CMS.The lecture introduces the physics motivation for experiments at the LHC energy.The design parameters and expected performance of the LHC machine are then discussed, followed by the design objectives for the detectors. The technical solutions are presented for each detector system (calorimetry, muon system, inner tracker, trigger). For each system the requirements, the technology choices and the achieved and expected performance are discussed. Lectures given at Herbstschule fu:r Hochenergiephysik, Maria Laach, 1999Copies of the transparencies are available in reduced format (black-and-white) from the secretariats of ATLAS and CMS (1999-093 Talk). A full-size colour version is available for consultation.e...

Exploring Adult Learners Usage of Information Communication Technology during a Virtual Peer Coaching Experience

Science.gov (United States)

Ladyshewsky, Richard; Pettapiece, Ronald G.

2015-01-01

The purpose of this study was to explore how post-graduate students in a fully online business course used information communication technology during a virtual peer coaching experience. In this exploration of technology use it was found students required additional guidance in the use of technologies such as email, telephone calling, and more…

Materials on the International Space Station - Forward Technology Solar Cell Experiment

Science.gov (United States)

Walters, R. J.; Garner, J. C.; Lam, S. N.; Vazquez, J. A.; Braun, W. R.; Ruth, R. E.; Lorentzen, J. R.; Bruninga, R.; Jenkins, P. P.; Flatico, J. M.

2005-01-01

This paper describes a space solar cell experiment currently being built by the Naval Research Laboratory (NRL) in collaboration with NASA Glenn Research Center (GRC), and the US Naval Academy (USNA). The experiment has been named the Forward Technology Solar Cell Experiment (FTSCE), and the purpose is to rapidly put current and future generation space solar cells on orbit and provide validation data for these technologies. The FTSCE is being fielded in response to recent on-orbit and ground test anomalies associated with space solar arrays that have raised concern over the survivability of new solar technologies in the space environment and the validity of present ground test protocols. The FTSCE is being built as part of the Fifth Materials on the International Space Station (MISSE) Experiment (MISSE-5), which is a NASA program to characterize the performance of new prospective spacecraft materials when subjected to the synergistic effects of the space environment. Telemetry, command, control, and communication (TNC) for the FTSCE will be achieved through the Amateur Satellite Service using the PCSat2 system, which is an Amateur Radio system designed and built by the USNA. In addition to providing an off-the-shelf solution for FTSCE TNC, PCSat2 will provide a communications node for the Amateur Radio satellite system. The FTSCE and PCSat2 will be housed within the passive experiment container (PEC), which is an approximately 2ft x2ft x 4in metal container built by NASA Langley Research Center (NASA LaRC) as part of the MISSE-5 program. NASA LaRC has also supplied a thin film materials experiment that will fly on the exterior of the thermal blanket covering the PCSat2. The PEC is planned to be transported to the ISS on a Shuttle flight. The PEC will be mounted on the exterior of the ISS by an astronaut during an extravehicular activity (EVA). After nominally one year, the PEC will be retrieved and returned to Earth. At the time of writing this paper, the

Unhappy families: using tabletop games as a technology to understand play in education

Directory of Open Access Journals (Sweden)

John Lean

2018-05-01

Full Text Available In this article, we argue that tabletop games provide a helpful means of rethinking the affordances of digital games in pedagogy. We argue that tabletop games offer a distinctive technology from digital games in exploring the idea of play as experience, providing a sociable, accessible and tactile platform that can easily be adapted by players to suit their needs. At a workshop session at an international conference on play in education, we used tabletop games to enable discussion and observation of play. This workshop suggested that, rather than a singular definition, tabletop play means different things to different people, and what is ‘counted as’ play depends upon both individual and group interactions. Building upon this discussion, in this article, we return to both tabletop and digital games to discuss the idea of play as experience, especially with regard to the use of technology in educational settings, and how games might be seen as less ‘predictable’ than other technologies. We hope that this discussion provides future inspiration to other scholars who are considering the use of tabletop games in both pedagogical and technological research.

Application of Ifsar Technology in Topographic Mapping: JUPEM's Experience

Science.gov (United States)

Zakaria, Ahamad

2018-05-01

The application of Interferometric Synthetic Aperture Radar (IFSAR) in topographic mapping has increased during the past decades. This is due to the advantages that IFSAR technology offers in solving data acquisition problems in tropical regions. Unlike aerial photography, radar technology offers wave penetration through cloud cover, fog and haze. As a consequence, images can be made free of any natural phenomenon defects. In Malaysia, Department of Survey and Mapping Malaysia (JUPEM) has been utilizing the IFSAR products since 2009 to update topographic maps at 1 : 50,000 map scales. Orthorectified radar imagery (ORI), Digital Surface Models (DSM) and Digital Terrain Models (DTM) procured under the project have been further processed before the products are ingested into a revamped mapping workflow consisting of stereo and mono digitizing processes. The paper will highlight the experience of Department of Survey and Mapping Malaysia (DSMM)/ JUPEM in using such technology in order to speed up mapping production.

Technologies of Experience

DEFF Research Database (Denmark)

Engberg-Pedersen, Anders

2017-01-01

. This essay considers Harun Farocki's installation Serious Games as an index into the emergence of a newfangled military aesthetic regime. Charting the institutional collaborations between the military and the creative industries in the twenty-first century, the essay examines what happens to the notion...... of “experience” with the emergence of immersive virtual reality technologies. Revisiting central thinkers in philosophical aesthetics as well as a key moment in the history of war and technology, namely, the invention of the modern war game around 1800, the essay outlines the recent merger of war and aesthetics...

Antigravity suit inflation - Kidney function and cardiovascular and hormonal responses in men

Science.gov (United States)

Geelen, Ghislaine; Kravik, Stein E.; Hadj-Aissa, Aoumeur; Leftheriotis, Georges; Vincent, Madeleine

1989-01-01

The effect of the lower body positive pressure (LBPP) on kidney function in normal men was investigated in experiments in which the subjects underwent 30 min of sitting and then were subjected to 4.5 h of 70-deg head-up tilt. During the last 3 h of the tilt period, an antigravity suit (60 T legs, 30 T abdomen) was applied. The results showed that LBPP induces a significant increase in effective renal plasma flow and significant changes in the kidney excretory patterns, which were similar to those observed during a water immersion or the early phase of bed rest.

Parents of Autistic Children and Their Experiences with Assistive Technology

Science.gov (United States)

Curran, David

2017-01-01

Assistive Technology (AT) has become an important tool used by special needs children for improving their quality of life by empowering their abilities, therefore improving their personal independence. The purpose of this Interpretative Phenomenological Analysis (IPA) study was to closely examine the experiences and meaning-making of parents, of…

Extreme-Environment Silicon-Carbide (SiC) Wireless Sensor Suite

Science.gov (United States)

Yang, Jie

2015-01-01

Phase II objectives: Develop an integrated silicon-carbide wireless sensor suite capable of in situ measurements of critical characteristics of NTP engine; Compose silicon-carbide wireless sensor suite of: Extreme-environment sensors center, Dedicated high-temperature (450 deg C) silicon-carbide electronics that provide power and signal conditioning capabilities as well as radio frequency modulation and wireless data transmission capabilities center, An onboard energy harvesting system as a power source.

Astronaut Neil Armstrong in Launch Complex 16 trailer during suiting up

Science.gov (United States)

1966-01-01

Astronaut Neil A. Armstrong, command pilot of the Gemini 8 space flight, sits in the Launch Complex 16 trailer during suiting up operations for the Gemini 8 mission. Suit technician Jim Garrepy assists.

Senior Students' Experiences, Perspectives, and Attitudes of Technological Competencies in Nursing Education

Science.gov (United States)

Bennett, Patricia C.

2017-01-01

Technological standards appear to be needed in undergraduate nursing education, as existing research has yet to establish technological standards for undergraduate nursing students. The purpose of this qualitative study was to examine the lived experiences of senior nursing students with respect to their perceptions regarding exposure to and…

Application verification research of cloud computing technology in the field of real time aerospace experiment

Science.gov (United States)

Wan, Junwei; Chen, Hongyan; Zhao, Jing

2017-08-01

According to the requirements of real-time, reliability and safety for aerospace experiment, the single center cloud computing technology application verification platform is constructed. At the IAAS level, the feasibility of the cloud computing technology be applied to the field of aerospace experiment is tested and verified. Based on the analysis of the test results, a preliminary conclusion is obtained: Cloud computing platform can be applied to the aerospace experiment computing intensive business. For I/O intensive business, it is recommended to use the traditional physical machine.

Accelerator Technology and High Energy Physic Experiments, WILGA 2012; EuCARD Sessions

CERN Document Server

Romaniuk, R S

2012-01-01

Wilga Sessions on HEP experiments, astroparticle physica and accelerator technology were organized under the umbrella of the EU FP7 Project EuCARD – European Coordination for Accelerator Research and Development. The paper is the second part (out of five) of the research survey of WILGA Symposium work, May 2012 Edition, concerned with accelerator technology and high energy physics experiments. It presents a digest of chosen technical work results shown by young researchers from different technical universities from this country during the XXXth Jubilee SPIE-IEEE Wilga 2012, May Edition, symposium on Photonics and Web Engineering. Topical tracks of the symposium embraced, among others, nanomaterials and nanotechnologies for photonics, sensory and nonlinear optical fibers, object oriented design of hardware, photonic metrology, optoelectronics and photonics applications, photonics-electronics co-design, optoelectronic and electronic systems for astronomy and high energy physics experiments, JET and pi-of-the ...

Internet Filtering Technology and Aversive Online Experiences in Adolescents.

Science.gov (United States)

Przybylski, Andrew K; Nash, Victoria

2017-05-01

To evaluate the effectiveness of Internet filtering tools designed to shield adolescents from aversive experiences online. A total of 1030 in-home interviews were conducted with early adolescents aged from 12 to 15 years (M = 13.50, SD = 1.18) and their caregivers. Caregivers were asked about their use of Internet filtering and adolescent participants were interviewed about their recent online experiences. Contrary to our hypotheses, policy, and industry advice regarding the assumed benefits of filtering we found convincing evidence that Internet filters were not effective at shielding early adolescents from aversive online experiences. Preregistered prospective and randomised controlled trials are needed to determine the extent to which Internet filtering technology supports vs thwarts young people online and if their widespread use justifies their financial and informational costs. Copyright © 2017 Elsevier Inc. All rights reserved.

EPO for the NASA SDO Extreme Ultraviolet Variability Experiment (EVE) Learning Suite for Educators

Science.gov (United States)

Kellagher, Emily; Scherrer, D. K.

2013-07-01

EVE Education and Public Outreach (EPO) promotes an understanding of the process of science and concepts within solar science and sun-earth connections. EVE EPO also features working scientists, current research and career awareness. One of the highlights for of this years projects is the digitization of solar lessons and the collaboration with the other instrument teams to develop new resources for students and educators. Digital lesson suite: EVE EPO has taken the best solar lessons and reworked then to make then more engaging, to reflect SDO data and made them SMARTboard compatible. We are creating a website that Students and teachers can access these lesson and use them online or download them. Project team collaboration: The SDO instruments (EVE, AIA and HMI) teams have created a comic book series for upper elementary and middle school students with the SDO mascot Camilla. These comics may be printed or read on mobile devices. Many teachers are looking for resources to use with their students via the Ipad so our collaboration helps supply teachers with a great resource that teachers about solar concepts and helps dispel solar misconceptions.Abstract (2,250 Maximum Characters): EVE Education and Public Outreach (EPO) promotes an understanding of the process of science and concepts within solar science and sun-earth connections. EVE EPO also features working scientists, current research and career awareness. One of the highlights for of this years projects is the digitization of solar lessons and the collaboration with the other instrument teams to develop new resources for students and educators. Digital lesson suite: EVE EPO has taken the best solar lessons and reworked then to make then more engaging, to reflect SDO data and made them SMARTboard compatible. We are creating a website that Students and teachers can access these lesson and use them online or download them. Project team collaboration: The SDO instruments (EVE, AIA and HMI) teams have created a

US monitoring and verification technology: on-site inspection experience and future challenges

International Nuclear Information System (INIS)

Gullickson, R.L.; Carlson, D.; Ingraham, J.; Laird, B.

2013-01-01

The United States has a long and successful history of cooperation with treaty partners in monitoring and verification. For strategic arms reduction treaties, our collaboration has resulted in the development and application of systems with limited complexity and intrusiveness. As we progress beyond New START (NST) along the 'road to zero', the reduced number of nuclear weapons is likely to require increased confidence in monitoring and verification techniques. This may place increased demands on the technology to verify the presence of a nuclear weapon and even confirm the presence of a certain type. Simultaneously, this technology must include the ability to protect each treaty partner's sensitive nuclear weapons information. Mutual development of this technology by treaty partners offers the best approach for acceptance in treaty negotiations. This same approach of mutual cooperation and development is essential for developing nuclear test monitoring technology in support of the Comprehensive Nuclear Test Ban Treaty (CTBT). Our ability to detect low yield and evasive testing will be enhanced through mutually developed techniques and experiments using laboratory laser experiments and high explosives tests in a variety of locations and geologies. (authors)

A design for living technology: experiments with the mind time machine.

Science.gov (United States)

Ikegami, Takashi

2013-01-01

Living technology aims to help people expand their experiences in everyday life. The environment offers people ways to interact with it, which we call affordances. Living technology is a design for new affordances. When we experience something new, we remember it by the way we perceive and interact with it. Recent studies in neuroscience have led to the idea of a default mode network, which is a baseline activity of a brain system. The autonomy of artificial life must be understood as a sort of default mode that self-organizes its baseline activity, preparing for its external inputs and its interaction with humans. I thus propose a method for creating a suitable default mode as a design principle for living technology. I built a machine called the mind time machine (MTM), which runs continuously for 10 h per day and receives visual data from its environment using 15 video cameras. The MTM receives and edits the video inputs while it self-organizes the momentary now. Its base program is a neural network that includes chaotic dynamics inside the system and a meta-network that consists of video feedback systems. Using this system as the hardware and a default mode network as a conceptual framework, I describe the system's autonomous behavior. Using the MTM as a testing ground, I propose a design principle for living technology.

Nondestructive examination technologies for inspection of radioactive waste storage tanks

International Nuclear Information System (INIS)

Anderson, M.T.; Kunerth, D.C.; Davidson, J.R.

1995-08-01

The evaluation of underground radioactive waste storage tank structural integrity poses a unique set of challenges. Radiation fields, limited access, personnel safety and internal structures are just some of the problems faced. To examine the internal surfaces a sensor suite must be deployed as an end effector on a robotic arm. The purpose of this report is to examine the potential failure modes of the tanks, rank the viability of various NDE technologies for internal surface evaluation, select a technology for initial EE implementation, and project future needs for NDE EE sensor suites

Experience with virtual reality-based technology in teaching restorative dental procedures.

Science.gov (United States)

Buchanan, Judith A

2004-12-01

This article reports on extensive experience with advanced simulation at the University of Pennsylvania, School of Dental Medicine (UPSDM). Virtual reality-based technology (VRBT) or advanced simulation is currently available for the instruction of dental students in preclinical restorative procedures. UPSDM was one of the first schools in the world to have extensive experience with VRBT technology using an advanced simulation unit (DentSim) from DenX, Ltd. UPSDM's experience consists of several years of research using control and experimental groups, employing students to participate in an investigative project, and using the units for remediation and a supplement to the preclinical laboratory. Currently, all first-year students (Class of 2007 and Class of 2008) are receiving most of their preparative operative training on the VRBT units. UPSDM started with one (beta) version unit in 1998, which was later updated and expanded first to four units and recently to fifteen units. This communication is presenting the studies that were of fundamental importance in making the decision to acquire fifteen units in 2003. The areas of main interest to the SDM concerning this technology were its use in teaching, refreshing, and remediating students in restorative procedures and its effectiveness as a teaching methodology in relation to time, efficiency, and faculty. Several studies with varying parameters were performed at various time points. The limited statistical analysis conducted was not conclusive for all measures, and in some cases the data only suggest areas of possible significance. This is due to the low number of students who could access the limited number of available units and the change of protocols in response to student and faculty input. Overall, the results do suggest, however, that students learn faster, arrive at the same level of performance, accomplish more practice procedures per hour, and request more evaluations per procedure or per hour than in our

In-space research, technology and engineering experiments and Space Station

Science.gov (United States)

Tyson, Richard; Gartrell, Charles F.

1988-01-01

The NASA Space Station will serve as a technology research laboratory, a payload-servicing facility, and a large structure fabrication and assembly facility. Space structures research will encompass advanced structural concepts and their dynamics, advanced control concepts, sensors, and actuators. Experiments dealing with fluid management will gather data on such fundamentals as multiphase flow phenomena. As requirements for power systems and thermal management grow, experiments quantifying the performance of energy systems and thermal management concepts will be undertaken, together with expanded efforts in the fields of information systems, automation, and robotics.

Heat and mass transfer in air-fed pressurised suits

International Nuclear Information System (INIS)

Tesch, K.; Collins, M.W.; Karayiannis, T.G.; Atherton, M.A.; Edwards, P.

2009-01-01

Air-fed pressurised suits are used to protect workers against contamination and hazardous environments. The specific application here is the necessity for regular clean-up maintenance within the torus chamber of fusion reactors. The current design of suiting has been developed empirically. It is, therefore, very desirable to formulate a thermo-fluids model, which will be able to define optimum designs and operating parameters. Two factors indicate that the modelling should be as comprehensive as possible. Firstly, the overall thermo-fluids problem is three-dimensional and includes mass as well as heat transfer. The fluid field is complex, bounded on one side by the human body and on the other by what may be distensible, porous and multi-layer clothing. In this paper, we report firstly the modelling necessary for the additional mass and heat transport processes. This involves the use of Fick's and Fourier's laws and conjugate heat transfer. The results of an initial validation study are presented. Temperatures at the outlet of the suits were obtained experimentally and compared with those predicted by the overall CFD model. Realistic three-dimensional geometries were used for the suit and human body. Calculations were for turbulent flow with single- and two-component (species) models

STS-74 M.S. Jerry L. Ross suits up

Science.gov (United States)

1995-01-01

Spaceflight veteran Jerry L. Ross, Mission Specialist 2 on Shuttle Mission STS-74, is assisted by a suit technician as he finishes getting into his launch/entry suit in the Operations and Checkout Building. Ross and four fellow astronauts will depart shortly for Launch Pad 39A, where the Space Shuttle Atlantis awaits a second liftoff attempt during a seven-minute window scheduled to open at approximately 7:30 a.m. EST, Nov. 12.

A longitudinal cross-level model of leader and salesperson influences on sales force technology use and performance.

Science.gov (United States)

Mathieu, John; Ahearne, Michael; Taylor, Scott R

2007-03-01

The authors examined the influence of the introduction of a new suite of technology tools on the performance of 592 salespersons. They hypothesized that the salespersons' work experience would have a negative effect on their technology self-efficacy, which in turn would relate positively to their use of technology. Sales performance was hypothesized to be positively related to both past performance and the use of new technology tools. Further, the authors hypothesized that leaders' commitment to sales technology would enhance salespersons' technology self-efficacy and usage, and leaders' empowering behaviors would influence salespersons' technology self-efficacy and moderate the individual-level relationships. Hierarchical linear modeling analyses confirmed all of the hypothesized individual-level relationships and most of the cross-level relationships stemming from average leader behaviors. In particular, empowering leadership exhibited multiple cross-level interactions, as anticipated. Results are discussed in terms of the importance of social-psychological factors related to the success of sales force technology interventions. (c) 2007 APA, all rights reserved.

Learning DHTMLX suite UI

CERN Document Server

Geske, Eli

2013-01-01

A fast-paced, example-based guide to learning DHTMLX.""Learning DHTMLX Suite UI"" is for web designers who have a basic knowledge of JavaScript and who are looking for powerful tools that will give them an extra edge in their own application development. This book is also useful for experienced developers who wish to get started with DHTMLX without going through the trouble of learning its quirks through trial and error. Readers are expected to have some knowledge of JavaScript, HTML, Document Object Model, and the ability to install a local web server.

International Experience of the Establishing Technology Transfer Centers at the Universities

Directory of Open Access Journals (Sweden)

Lysenko, V.S.

2015-01-01

Full Text Available The analysis of the experience of creation and operation of technology transfer centers on the basis of US universities with the aim of using positive methods for the creation of such centers in Ukraine is presented.

Increasing Teacher Confidence in Teaching and Technology Use through Vicarious Experiences within an Environmental Education Context

Science.gov (United States)

Willis, Jana; Weiser, Brenda; Smith, Donna

2016-01-01

Providing teacher candidates opportunities to engage in experiences modeling effective technology integration could improve confidence/comfort in using technology and support skill development and transfer. A purposeful sample of 424 candidates in an educational technology course was administered the Technology and Teaching Efficacy Scale to…

Point-of-care technology: integration for improved delivery of care.

Science.gov (United States)

Gregory, Debbie; Buckner, Martha

2014-01-01

The growing complexity of technology, equipment, and devices involved in patient care delivery can be staggering and overwhelming. Technology is intended to be a tool to help clinicians, but it can also be a frustrating hindrance if not thoughtfully planned and strategically aligned. Critical care nurses are key partners in the collaborations needed to improve safety and quality through health information technology (IT). Nurses must advocate for systems that are interoperable and adapted to the context of care experiences. The involvement and collaboration between clinicians, information technology specialists, biomedical engineers, and vendors has never been more relevant and applicable. Working together strategically with a shared vision can effectively provide a seamless clinical workflow, maximize technology investments, and ultimately improve patient care delivery and outcomes. Developing a strategic integrated clinical and IT roadmap is a critical component of today's health care environment. How can technology strategy be aligned from the executive suite to the bedside caregiver? What is the model for using clinical workflows to drive technology adoption? How can the voice of the critical care nurse strengthen this process? How can success be assured from the initial assessment and selection of technology to a sustainable support model? What is the vendor's role as a strategic partner and "co-caregiver"?

A 41 ps ASIC time-to-digital converter for physics experiments

International Nuclear Information System (INIS)

Russo, Stefano; Petra, Nicola; De Caro, Davide; Barbarino, Giancarlo; Strollo, Antonio G.M.

2011-01-01

We present a novel Time-to-Digital (TDC) converter for physics experiments. Proposed TDC is based on a synchronous counter and an asynchronous fine interpolator. The fine part of the measurement is obtained using NORA inverters that provide improved resolution. A prototype IC was fabricated in 180 nm CMOS technology. Experimental measurements show that proposed TDC features 41 ps resolution associated with 0.35LSB differential non-linearity, 0.77LSB integral non-linearity and a negligible single shot precision. The whole dynamic range is equal to 18μs. The proposed TDC is designed using a flash architecture that reduces dead time. Data reported in the paper show that our design is well suited for present and future particle physics experiments.

Effect of swimming suit design on the energy demands of swimming.

Science.gov (United States)

Starling, R D; Costill, D L; Trappe, T A; Jozsi, A C; Trappe, S W; Goodpaster, B H

1995-07-01

Eight competitive male swimmers completed a standardized 365.8 m (400 yd) freestyle swimming trial at a fixed pace (approximately 90% of maximal effort) while wearing a torso swim suit (TOR) or a standard racing suit (STD). Oxygen uptake (VO2), blood lactate, heart rate (HR), and distance per stroke (DPS) measurements were obtained. In addition, a video-computer system was used to collect velocity data during a prone underwater glide following a maximal leg push-off from the side of the pool while wearing the TOR and STD suits. These data were used to calculate the total distance covered during the glides. VO2 (3.76 +/- 0.16 vs 3.92 +/- 0.18 l.min-1) and lactate (8.08 +/- 0.53 vs, 9.66 +/- 0.66 mM) were significantly (P 0.05) between the TOR (170.1 +/- 5.1 b.min-1) and STD (173.5 +/- 5.7 b.min-1) trials. DPS was significantly greater during the TOR (2.70 +/- 0.066 m.stroke-1) versus STD (2.58 +/- 0.054 m.stroke-1) trial. A significantly greater total distance was covered during the prone glide while wearing the TOR (2.05 +/- 0.067 m) compared to the STD (2.00 +/- 0.080 m) suit. These findings demonstrate that a specially designed torso suit reduces the energy demand of swimming compared to a standard racing suit which may be due to a reduction in body drag.

Advanced Reactor Licensing: Experience with Digital I and C Technology in Evolutionary Plants

International Nuclear Information System (INIS)

Wood, RT

2004-01-01

This report presents the findings from a study of experience with digital instrumentation and controls (I and C) technology in evolutionary nuclear power plants. In particular, this study evaluated regulatory approaches employed by the international nuclear power community for licensing advanced l and C systems and identified lessons learned. The report (1) gives an overview of the modern l and C technologies employed at numerous evolutionary nuclear power plants, (2) identifies performance experience derived from those applications, (3) discusses regulatory processes employed and issues that have arisen, (4) captures lessons learned from performance and regulatory experience, (5) suggests anticipated issues that may arise from international near-term deployment of reactor concepts, and (6) offers conclusions and recommendations for potential activities to support advanced reactor licensing in the United States

28 CFR 36.501 - Private suits.

Science.gov (United States)

2010-07-01

... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Enforcement § 36.501 Private suits. (a) General. Any person who is... order. Upon timely application, the court may, in its discretion, permit the Attorney General to... general public importance. Upon application by the complainant and in such circumstances as the court may...

Development and Evaluation of a Mobile Application Suite for Enhancing the Social Inclusion and Well-Being of Seniors

Directory of Open Access Journals (Sweden)

Christos Goumopoulos

2017-06-01

Full Text Available Smart mobile devices, due to their ubiquitous nature and high level penetration in everyday life, can be a key component of an Ambient Assisted Living system to improve the quality of life of older people. This paper presents the development and evaluation of Senior App Suite, a system created for assisting seniors’ personal independence and social inclusion. The system integrates mobile computing combined with web and service-oriented technologies to offer a mobile application suite that seniors can easily use to access services, spanning various application areas such as social networking, emergency detection and overall well-being. The research hypothesis is that using such services can be beneficial for decreasing social isolation. There is quantitative indication that this assumption is realistic backed up also by the qualitative analysis from the user’s feedback derived during a pilot study (n = 22 suggesting that Senior App Suite can motivate people in new activities, maintain connection with social ties, give joy and self-confidence, and increase the frequency and quality of social interactions. Our contribution is a detailed methodology spanning the research, design, development, and evaluation of a solution that aims to improve the quality of life of seniors while addressing open issues identified in related initiatives.

Progress of plasma experiments and superconducting technology in LHD

International Nuclear Information System (INIS)

Motojima, O.; Sakakibara, S.; Imagawa, S.; Sagara, A.; Seki, T.; Mutoh, T.; Morisaki, T.; Komori, A.; Ohyabu, N.; Yamada, H.

2006-01-01

The large helical device is a heliotron device with L = 2 and M = 10 continuous helical coils and three pairs of poloidal coils, and all of coils are superconductive. Since the experiments started in 1998, the development of engineering technologies and the demonstration of large-superconducting-machine operations have greatly contributed to an understanding of physics in currentless plasmas and a verification of the capability of fully steady-state operation. In recent plasma experiments, the steady state and high-beta experiments, which are the most important subjects for the realization of attractive fusion reactors, have progressed remarkably and produced two world-record parameters, i.e. the highest average beta of 4.5% in helical devices and the highest total input energy of 1.6 GJ in all magnetic confinement devices. No degradation has been observed in the coil performance, and stable cryogenic operational schemes at 4.4 K have been established. The physics and engineering results from the LHD experiment directly contribute to the design study for a D-T fusion demo reactor FFHR with a LHD-type heliotron configuration

Results and Analysis from Space Suit Joint Torque Testing

Science.gov (United States)

Matty, Jennifer

2010-01-01

This joint mobility KC lecture included information from two papers, "A Method for and Issues Associated with the Determination of Space Suit Joint Requirements" and "Results and Analysis from Space Suit Joint Torque Testing," as presented for the International Conference on Environmental Systems in 2009 and 2010, respectively. The first paper discusses historical joint torque testing methodologies and approaches that were tested in 2008 and 2009. The second paper discusses the testing that was completed in 2009 and 2010.

A Test Suite for Safety-Critical Java using JML

DEFF Research Database (Denmark)

Ravn, Anders Peter; Søndergaard, Hans

2013-01-01

Development techniques are presented for a test suite for the draft specification of the Java profile for Safety-Critical Systems. Distinguishing features are: specification of conformance constraints in the Java Modeling Language, encoding of infrastructure concepts without implementation bias......, and corresponding specifications of implicitly stated behavioral and real-time properties. The test programs are auto-generated from the specification, while concrete values for test parameters are selected manually. The suite is open source and publicly accessible....

Technology support for participatory budgeting

DEFF Research Database (Denmark)

Rose, Jeremy; Rios, Jesus; Lippa, Barbara

2010-01-01

Participatory budgeting is a reasonably well-established governance practice, particularly in South America. It is information and communication rich - making it well suited for modern technology support; in addition, the widespread participation of many citizens is difficult to achieve without...

Legal threat, cold delay UC experiment.

Science.gov (United States)

Norman, Colin

1983-10-21

A controversial University of California, Berkeley, experiment that would have released genetically engineered organisms into the environment has been postponed. Although Steven Lindow and his colleagues received approval for field tests from the National Institutes of Health's Recombinant DNA Advisory Committee, environmental activist Jeremy Rifkin filed suit against NIH, claiming its action violated the National Environmental Policy Act. With one suit pending and another threatened, the decision was made to postpone the tests until spring 1984. The outcome of the Rifkin suit will have an impact on other genetic research with ecological implications.

DEMON/ANGEL - A SUITE OF PROGRAMS TO CARRY OUT DENSITY MODIFICATION

NARCIS (Netherlands)

VELLIEUX, FMDAP; HUNT, JF; ROY, S; READ, RJ

1995-01-01

The DEMON/ANGEL suite of computer programs has been developed to carry out density modification by non-crystallographic symmetry-averaging, solvent-flattening and histogram-mapping techniques. This suite consists of programs that allow molecular envelopes to be defined and modified,

Teachers' Experiences of Technology-Based Teaching and Learning in the Foundation Phase

Science.gov (United States)

Hannaway, D. M.; Steyn, M. G.

2017-01-01

This paper presents one aspect of a larger scale doctoral study, namely the teachers' experiences of technology-based teaching and learning in the Foundation Phase. Technology is a huge driver of change and South African education has to change regularly to meet the requirements set out by the Department of Education, including the development of…

DYNA3D/ParaDyn Regression Test Suite Inventory

Energy Technology Data Exchange (ETDEWEB)

Lin, Jerry I. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-09-01

The following table constitutes an initial assessment of feature coverage across the regression test suite used for DYNA3D and ParaDyn. It documents the regression test suite at the time of preliminary release 16.1 in September 2016. The columns of the table represent groupings of functionalities, e.g., material models. Each problem in the test suite is represented by a row in the table. All features exercised by the problem are denoted by a check mark (√) in the corresponding column. The definition of “feature” has not been subdivided to its smallest unit of user input, e.g., algorithmic parameters specific to a particular type of contact surface. This represents a judgment to provide code developers and users a reasonable impression of feature coverage without expanding the width of the table by several multiples. All regression testing is run in parallel, typically with eight processors, except problems involving features only available in serial mode. Many are strictly regression tests acting as a check that the codes continue to produce adequately repeatable results as development unfolds; compilers change and platforms are replaced. A subset of the tests represents true verification problems that have been checked against analytical or other benchmark solutions. Users are welcomed to submit documented problems for inclusion in the test suite, especially if they are heavily exercising, and dependent upon, features that are currently underrepresented.

Extending and Enhancing SAS (Static Analysis Suite)

CERN Document Server

Ho, David

2016-01-01

The Static Analysis Suite (SAS) is an open-source software package used to perform static analysis on C and C++ code, helping to ensure safety, readability and maintainability. In this Summer Student project, SAS was enhanced to improve ease of use and user customisation. A straightforward method of integrating static analysis into a project at compilation time was provided using the automated build tool CMake. The process of adding checkers to the suite was streamlined and simplied by developing an automatic code generator. To make SAS more suitable for continuous integration, a reporting mechanism summarising results was added. This suitability has been demonstrated by inclusion of SAS in the Future Circular Collider Software nightly build system. Scalability of the improved package was demonstrated by using the tool to analyse the ROOT code base.

Statistical Evaluation of Causal Factors Associated with Astronaut Shoulder Injury in Space Suits.

Science.gov (United States)

Anderson, Allison P; Newman, Dava J; Welsch, Roy E

2015-07-01

Shoulder injuries due to working inside the space suit are some of the most serious and debilitating injuries astronauts encounter. Space suit injuries occur primarily in the Neutral Buoyancy Laboratory (NBL) underwater training facility due to accumulated musculoskeletal stress. We quantitatively explored the underlying causal mechanisms of injury. Logistic regression was used to identify relevant space suit components, training environment variables, and anthropometric dimensions related to an increased propensity for space-suited injury. Two groups of subjects were analyzed: those whose reported shoulder incident is attributable to the NBL or working in the space suit, and those whose shoulder incidence began in active duty, meaning working in the suit could be a contributing factor. For both groups, percent of training performed in the space suit planar hard upper torso (HUT) was the most important predictor variable for injury. Frequency of training and recovery between training were also significant metrics. The most relevant anthropometric dimensions were bideltoid breadth, expanded chest depth, and shoulder circumference. Finally, record of previous injury was found to be a relevant predictor for subsequent injury. The first statistical model correctly identifies 39% of injured subjects, while the second model correctly identifies 68% of injured subjects. A review of the literature suggests this is the first work to quantitatively evaluate the hypothesized causal mechanisms of all space-suited shoulder injuries. Although limited in predictive capability, each of the identified variables can be monitored and modified operationally to reduce future impacts on an astronaut's health.

Technical requirement of experiments and facilities for fusion nuclear technology

International Nuclear Information System (INIS)

Abdou, M.; Tillak, M.; Gierszwski, P.; Grover, J.; Puigh, R.; Sze, D.K.; Berwald, D.

1986-06-01

The technical issues and requirements of experiments and facilities for fusion nuclear technology (FNT) have been investigated. The nuclear subsystems addressed are: a) blanket, b) radiation shield, c) tritium processing system, and d) plasma interactive components. Emphasis has been placed on the important and complex development problems of the blanket. A technical planning process for FNT has been developed and applied, including four major elements: 1) characterization of issues, 2) quantification of testing requirements, 3) evaluation of facilities, and 4) development of a test plan to identify the role, timing, characteristics and costs of major experiments and facilities

Technology of mirror machines: LLL facilities for magnetic mirror fusion experiments

International Nuclear Information System (INIS)

Batzer, T.H.

1977-01-01

Significant progress in plasma confinement and temperature has been achieved in the 2XIIB facility at Livermore. These encouraging results, and their theoretical corroboration, have provided a firm basis for the design of a new generation of magnetic mirror experiments, adding support to the mirror concept of a fusion reactor. Two new mirror experiments have been proposed to succeed the currently operating 2XIIB facility. The first of these called TMX (Tandem Mirror Experiment) has been approved and is currently under construction. TMX is designed to utilize the intrinsic positive plasma potential of two strong, and relatively small, minimum B mirror cells to enhance the confinement of a much larger, magnetically weaker, centrally-located mirror cell. The second facility, MFTF (Mirror Fusion Test Facility), is currently in preliminary design with line item approval anticipated for FY 78. MFTF is designed primarily to exploit the experimental and theoretical results derived from 2XIIB. Beyond that, MFTF will develop the technology for the transition from the present small mirror experiments to large steady-state devices such as the mirror FERF/FTR. The sheer magnitude of the plasma volume, magnetic field, neutral beam power, and vacuum pumping capacity, particularly in the case of MFTF, has placed new and exciting demands on engineering technology. An engineering overview of MFTF, TMX, and associated MFE activities at Livermore will be presented

The medical antigravity suit for management of surgically uncontrollable bleeding associated with abdominal pregnancy.

Science.gov (United States)

Sandberg, E C; Pelligra, R

1983-07-01

Three patients with abdominal pregnancy have been treated at Stanford University Hospital in recent years. Common to each was surgically uncontrolled hemorrhage for which circumferential pneumatic compression (supplied by a medical antigravity suit) was used to stop the bleeding. In each patient, the hemostatic effect of treatment was dramatic. In published accounts of the use of the garment in other severely hemorrhaging patients, the effects have been similarly dramatic and equally successful. These observations lead to a compelling consideration in regard to optimum management of patients with abdominal pregnancy. If our experience is confirmed by others, optimum management in abdominal pregnancy hereafter should regularly and routinely include removal of the placenta at the primary operation. This approach would anticipate use of the medical antigravity suit to provide hemostasis if surgically uncontrollable bleeding is encountered. Theoretically, the complications and long-term morbidity associated with retention of the placenta would be eliminated by this means while the previous disadvantage of placental removal, the potential for exsanguinating hemorrhage, would be circumvented.

STS-76 Payload Cmdr Ronald Sega suits up

Science.gov (United States)

1996-01-01

STS-76 Payload Commander Ronald M. Sega is donning his launch/entry suit in the Operations and Checkout Building with assistance from a suit technician. The third docking between the Russian Space Station Mir and the U.S. Space Shuttle marks the second trip into space for Sega, who recently served a five-month assignment in Russia as operations director for NASA activities there. Once suitup activities are completed the six-member STS-76 flight crew will depart for Launch Pad 39B, where the Space Shuttle Atlantis is undergoing final preparations for liftoff during an approximately seven-minute launch window opening around 3:13 a.m. EST, March 22.

The UEA Small RNA Workbench: A Suite of Computational Tools for Small RNA Analysis.

Science.gov (United States)

Mohorianu, Irina; Stocks, Matthew Benedict; Applegate, Christopher Steven; Folkes, Leighton; Moulton, Vincent

2017-01-01

RNA silencing (RNA interference, RNAi) is a complex, highly conserved mechanism mediated by short, typically 20-24 nt in length, noncoding RNAs known as small RNAs (sRNAs). They act as guides for the sequence-specific transcriptional and posttranscriptional regulation of target mRNAs and play a key role in the fine-tuning of biological processes such as growth, response to stresses, or defense mechanism.High-throughput sequencing (HTS) technologies are employed to capture the expression levels of sRNA populations. The processing of the resulting big data sets facilitated the computational analysis of the sRNA patterns of variation within biological samples such as time point experiments, tissue series or various treatments. Rapid technological advances enable larger experiments, often with biological replicates leading to a vast amount of raw data. As a result, in this fast-evolving field, the existing methods for sequence characterization and prediction of interaction (regulatory) networks periodically require adapting or in extreme cases, a complete redesign to cope with the data deluge. In addition, the presence of numerous tools focused only on particular steps of HTS analysis hinders the systematic parsing of the results and their interpretation.The UEA small RNA Workbench (v1-4), described in this chapter, provides a user-friendly, modular, interactive analysis in the form of a suite of computational tools designed to process and mine sRNA datasets for interesting characteristics that can be linked back to the observed phenotypes. First, we show how to preprocess the raw sequencing output and prepare it for downstream analysis. Then we review some quality checks that can be used as a first indication of sources of variability between samples. Next we show how the Workbench can provide a comparison of the effects of different normalization approaches on the distributions of expression, enhanced methods for the identification of differentially expressed

What's New with MS Office Suites

Science.gov (United States)

Goldsborough, Reid

2012-01-01

If one buys a new PC, laptop, or netbook computer today, it probably comes preloaded with Microsoft Office 2010 Starter Edition. This is a significantly limited, advertising-laden version of Microsoft's suite of productivity programs, Microsoft Office. This continues the trend of PC makers providing ever more crippled versions of Microsoft's…

Antigravity Suits For Studies Of Weightlessness

Science.gov (United States)

Kravik, Stein E.; Greenleaf, John

1992-01-01

Report presents results of research on use of "antigravity" suit, one applying positive pressure to lower body to simulate some effects of microgravity. Research suggests lower-body positive pressure is alternative to bed rest or immersion in water in terrestrial studies of cardioregulatory, renal, electrolyte, and hormonal changes induced in humans by microgravity.

Using Inertial Sensors in Smartphones for Curriculum Experiments of Inertial Navigation Technology

OpenAIRE

Niu, Xiaoji; Wang, Qingjiang; Li, You; Li, Qingli; Liu, Jingnan

2015-01-01

Inertial technology has been used in a wide range of applications such as guidance, navigation, and motion tracking. However, there are few undergraduate courses that focus on the inertial technology. Traditional inertial navigation systems (INS) and relevant testing facilities are expensive and complicated in operation, which makes it inconvenient and risky to perform teaching experiments with such systems. To solve this issue, this paper proposes the idea of using smartphones, which are ubi...

Propulsion Noise Reduction Research in the NASA Advanced Air Transport Technology Project

Science.gov (United States)

Van Zante, Dale; Nark, Douglas; Fernandez, Hamilton

2017-01-01

The Aircraft Noise Reduction (ANR) sub-project is focused on the generation, development, and testing of component noise reduction technologies progressing toward the NASA far term noise goals while providing associated near and mid-term benefits. The ANR sub-project has efforts in airframe noise reduction, propulsion (including fan and core) noise reduction, acoustic liner technology, and propulsion airframe aeroacoustics for candidate conventional and unconventional aircraft configurations. The current suite of propulsion specific noise research areas is reviewed along with emerging facility and measurement capabilities. In the longer term, the changes in engine and aircraft configuration will influence the suite of technologies necessary to reduce noise in next generation systems.

33 CFR 144.20-5 - Exposure suits.

Science.gov (United States)

2010-07-01

... light that is approved under 46 CFR 161.012. Each light must be securely attached to the front shoulder... lanyard coiled and stopped off. (f) No stowage container for exposure suits may be capable of being locked...

Knowledge acquisition and complementary specialization in alliances : The impact of technological overlap and alliance experience

NARCIS (Netherlands)

Kavusan, Korcan; Noorderhaven, Niels G.; Duysters, Geert M.

2016-01-01

While alliances are widely acknowledged to facilitate knowledge transfers across firms, alliances also allow partnering firms to combine technological capabilities toward joint innovation outcomes through complementary specialization. We examine how technological overlap and alliance experience -

Evaluation of Triathlon Suit Characteristics Relevant to Thermophysiology of an Athlete

Directory of Open Access Journals (Sweden)

Chris Watson

2018-02-01

Full Text Available The thermophysiological function of clothing influences athletic wellbeing and performance, particularly in outdoor endurance activities such as triathlon. However, there is very little existing research on the performance of triathlon suits relative to thermophysiological function of the wearer. This pilot study provides a benchmark for triathlon suit performance and insights into improving the suit design and material engineering. The study assessed the thermal and breathability attributes of 6 triathlon suits and concluded that while both of the attributes were similar overall, they varied in different body zones due to different design, construction and materials. Local thermal and evaporative performance were affected by fabric construction; double fabric layering in the stomach panel; the number, size, shape and material structure of rear pockets; cycle crotch pad size, shape and thickness; and panel design. The results of this study show the importance of garment design, construction and materials for the best thermal and evaporative resistance attributes of sportswear.

STS-82 Pilot Scott J. 'Doc' Horowitz Suit Up

Science.gov (United States)

1997-01-01

STS-82 Pilot Scott J. 'Doc' Horowitz puts on a glove of his launch and entry suit with assistance from a suit technician in the Operations and Checkout Building. This is Horowitz''';s second space flight. He and the six other crew members will depart shortly for Launch Pad 39A, where the Space Shuttle Discovery awaits liftoff on a 10-day mission to service the orbiting Hubble Space Telescope (HST). This will be the second HST servicing mission. Four back-to-back spacewalks are planned.

Web Viz 2.0: A versatile suite of tools for collaboration and visualization

Science.gov (United States)

Spencer, C.; Yuen, D. A.

2012-12-01

Most scientific applications on the web fail to realize the full collaborative potential of the internet by not utilizing web 2.0 technology. To relieve users from the struggle with software tools and allow them to focus on their research, new software developed for scientists and researchers must harness the full suite of web technology. For several years WebViz 1.0 enabled researchers with any web accessible device to interact with the peta-scale data generated by the Hierarchical Volume Renderer (HVR) system. We have developed a new iteration of WebViz that can be easily interfaced with many problem domains in addition to HVR by employing the best practices of software engineering and object-oriented programming. This is done by separating the core WebViz system from domain specific code at an interface, leveraging inheritance and polymorphism to allow newly developed modules access to the core services. We employed several design patterns (model-view-controller, singleton, observer, and application controller) to engineer this highly modular system implemented in Java.

Pengujian Kualitas Website Ditinjau dari Perspektif Accessibility, Experience, Marketing dan Technology

Directory of Open Access Journals (Sweden)

Diyurman Gea

2014-06-01

Full Text Available The purpose of this study was to determine the quality of the websites managed by individuals, companies and governments. The test results would be useful for managers to pay more attention to the quality of the website optimally through several perspectives: accessibility, experience, marketing and technology. The research used samples from 350 websites and the data were divided into seven categories, namely: website managed by SMEs (small and medium, website of universities, website of governments, e-commerce, news websites, website of industrial companies, and website of non-profit organization. We used Nibler as the testing tool to facilitate the assessment process. Data were analyzed using WEKA presented in the form of a decision tree. The results showed that the tested websites had an average value of 4.66 or worse (scale 1-10. The conclusion is that the manager of the website should perform repairs on the data and applications, in particular in the perspective of technology, accessibility and experience.

Procedural Decision-Making Experiences among Informational Technology Professionals at a Midwestern Fortune 500 Company

Science.gov (United States)

McKee, Shari Turner

2013-01-01

Between 2002 and 2012, information technology (IT) procedural decisions related to technology, fraud, bias, greed, and misleading information increased cost by more than $44 billion. The purpose of this phenomenological study was to explore IT professionals' experiences of IT procedural decisions. The research questions were intended to learn from…

The European space suit, a design for productivity and crew safety

Science.gov (United States)

Skoog, A. Ingemar; Berthier, S.; Ollivier, Y.

In order to fulfil the two major mission objectives, i.e. support planned and unplanned external servicing of the COLUMBUS FFL and support the HERMES vehicle for safety critical operations and emergencies, the European Space Suit System baseline configuration incorporates a number of design features, which shall enhance the productivity and the crew safety of EVA astronauts. The work in EVA is today - and will be for several years - a manual work. Consequently, to improve productivity, the first challenge is to design a suit enclosure which minimizes movement restrictions and crew fatigue. It is covered by the "ergonomic" aspect of the suit design. Furthermore, it is also necessary to help the EVA crewmember in his work, by giving him the right information at the right time. Many solutions exist in this field of Man-Machine Interface, from a very simple system, based on cuff check lists, up to advanced systems, including Head-Up Displays. The design concept for improved productivity encompasses following features: • easy donning/doffing thru rear entry, • suit ergonomy optimisation, • display of operational information in alpha-numerical and graphical from, and • voice processing for operations and safety critical information. Concerning crew safety the major design features are: • a lower R-factor for emergency EVA operations thru incressed suit pressure, • zero prebreath conditions for normal operations, • visual and voice processing of all safety critical functions, and • an autonomous life support system to permit unrestricted operations around HERMES and the CFFL. The paper analyses crew safety and productivity criteria and describes how these features are being built into the design of the European Space Suit System.

Induction Accelerator Technology Choices for the Integrated Beam Experiment (IBX)

International Nuclear Information System (INIS)

Leitner, M.A.; Celata, C.M.; Lee, E.P.; Logan, B.G.; Sabbi, G.; Waldron, W.L.; Barnard, J.J.

2003-01-01

Over the next three years the research program of the Heavy Ion Fusion Virtual National Laboratory (HIF-VNL), a collaboration among LBNL, LLNL, and PPPL, is focused on separate scientific experiments in the injection, transport and focusing of intense heavy ion beams at currents from 100 mA to 1 A. As a next major step in the HIF-VNL program, we aim for a complete 'source-to-target' experiment, the Integrated Beam Experiment (IBX). By combining the experience gained in the current separate beam experiments IBX would allow the integrated scientific study of the evolution of a single heavy ion beam at high current (∼1 A) through all sections of a possible heavy ion fusion accelerator: the injection, acceleration, compression, and beam focusing.This paper describes the main parameters and technology choices of the planned IBX experiment. IBX will accelerate singly charged potassium or argon ion beams up to 10 MeV final energy and a longitudinal beam compression ratio of 10, resulting in a beam current at target of more than 10 Amperes. Different accelerator cell design options are described in detail: Induction cores incorporating either room temperature pulsed focusing-magnets or superconducting magnets

33 CFR 150.518 - What are the inspection requirements for work vests and immersion suits?

Science.gov (United States)

2010-07-01

... requirements for work vests and immersion suits? 150.518 Section 150.518 Navigation and Navigable Waters COAST... vests and immersion suits? (a) All work vests and immersion suits must be inspected by the owner or... a work vest or immersion suit is inspected and is in serviceable condition, then it may remain in...

A glimpse from the inside of a space suit: What is it really like to train for an EVA?

Science.gov (United States)

Gast, Matthew A.; Moore, Sandra K.

2011-01-01

The beauty of the view from the office of a spacewalking astronaut gives the impression of simplicity, but few beyond the astronauts, and those who train them, know what it really takes to get there. Extravehicular Activity (EVA) training is an intense process that utilizes NASA's Neutral Buoyancy Laboratory (NBL) to develop a very specific skill set needed to safely construct and maintain the orbiting International Space Station. To qualify for flight assignments, astronauts must demonstrate the ability to work safely and efficiently in the physically demanding environment of the space suit, possess an acute ability to resolve unforeseen problems, and implement proper tool protocols to ensure no tools will be lost in space. Through the insights and the lessons learned by actual EVA astronauts and EVA instructors, this paper will take you on a journey through an astronaut's earliest experiences working in the space suit, termed the Extravehicular Mobility Unit (EMU), in the underwater training environment of the NBL. This work details an actual Suit Qualification NBL training event, outlines the numerous challenges the astronauts face throughout their initial training, and the various ways they adapt their own abilities to overcome them. The goal of this paper is to give everyone a small glimpse into what it is really like to work in a space suit.

Project Overview of the Naval Postgraduate School Spacecraft Architecture and Technology Demonstration Experiment

National Research Council Canada - National Science Library

Reuer, Charles

2001-01-01

The Naval Postgraduate School's current attempt at getting another spacecraft into orbit is focusing on Naval Postgraduate School Spacecraft Architecture and Technology Demonstration Experiment (NPSAT1...

FusionCharts Beginner's Guide The Official Guide for FusionCharts Suite

CERN Document Server

Nadhani, Sanket; Bhattacharya, Shamasis

2012-01-01

The book is written as a practical, step-by-step guide to using FusionCharts Suite. The book not only teaches you the fundamentals and implementation of FusionCharts Suite, but also makes you the data visualization guru among your friends and colleagues by teaching how to select the right chart type and usability tips. Filled with examples, code samples and practical tips in a no-nonsense way, the book is a breeze to read.This book is both for beginners and advanced web developers who need to create interactive charts for their web applications. No previous knowledge of FusionCharts Suite is a

Prokofiev. "Romeo and Juliet" - Suites / Iran March

Index Scriptorium Estoniae

March, Iran

1991-01-01

Uuest heliplaadist "Prokofiev. "Romeo and Juliet" - Suites: N 1 Op. 64 bis a; N 2 Op. 64 ter b; N 3 Op. 101 c. Royal Scottish National Orchestra /Neeme Järvi" Chandos cassette ABTD 1536; CD CHAN 8940 (78 minutes) etc

KNF's fuel service technologies and experiences

International Nuclear Information System (INIS)

Shin, Jung Cheol; Kwon, Jung Tack; Kim, Jaeik; Park, Jong Youl; Kim, Yong Chan

2009-01-01

In Korea, since 1978, the commercial nuclear power plant was operated. After 10 years, from 1988, the nuclear fuel was produced by KNF (Korea Nuclear Fuel). The Fuel Service Team was established at KNF in 1995. Through the technical self reliance periods in cooperate with advanced foreign companies for 5 years, KNF has started to carry out fuel service activities onsite in domestic nuclear power plants. By ceaseless improving and advancing our own methodologies, after that, KNF is able to provide the most safe and reliable fuel repair services and poolside examinations including the root cause analysis of failed fuels. Recently, KNF developed the fuel cleaning system using ultrasonic technique for crud removal, and the CANDU fuel sipping system to detect a failed fuel bundle in PHWR. In this paper, all of KNF's fuel service technologies are briefly described, and the gained experience in shown

Foreign Experience in Training Future Engineering Educators for Modeling Technological Processes

Science.gov (United States)

Bokhonko, Yevhen

2017-01-01

The article deals with the study of foreign experience in training engineering educators for modeling technological processes. It has been stated that engineering education is a field that is being dramatically developed taking into account the occurring changes in educational paradigms, global higher education space, national higher education…

National Educators' Workshop: Update 1988. Standard Experiments in Engineering Materials Science and Technology

Science.gov (United States)

Gardner, James E. (Compiler); Jacobs, James A. (Compiler)

1990-01-01

Presented here is a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 88, held May 10 to 12, 1988 at the National Institute of Standards and Technology (NIST), Gaithersberg, Maryland. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.

Meanings and experiences of assistive technologies in everyday lives of older citizens

DEFF Research Database (Denmark)

Dahler, Anne Marie; Maling Rasmussen, Dorte; Andersen, Pernille Tanggaard

2016-01-01

. Results: Review of these studies show that older people generally have positive attitudes towards AT, but also that acceptance of technologies is a potentially stressful process where trust towards technologies and other people are of importance. Older people have ambivalent experiences with technology......Purpose: The purpose of this study was to synthesize the available qualitative studies on the meanings of assistive technologies (AT) in elderly people's everyday lives in order to identify central concepts, themes, and findings from existing research. Method: A systematic search of the literature...... was conducted, using predetermined search strategies. Exclusion criteria were, in accordance with the meta-interpretive approach, developed iteratively during the reading of abstracts and articles. Interpretations from the included studies were used as data for thematic analysis and synthesis of findings...

An Examination of Technology Training Experiences from Teacher Candidacy to In-Service Professional Development

Science.gov (United States)

Williams, Mable Evans

2017-01-01

The purpose of this qualitative study was to explore the perceptions of in-service teachers concerning the effectiveness of technology training from a teacher education preparation program to in-service professional development. The findings of the study revealed that inservice teachers have had varying degrees of technology experiences from their…

The investigation of science teachers’ experience in integrating digital technology into science teaching

Science.gov (United States)

Agustin, R. R.; Liliasari; Sinaga, P.; Rochintaniawati, D.

2018-05-01

The use of technology into science learning encounters problems. One of the problem is teachers’ less technological pedagogical and content knowledge (TPACK) on the implementation of technology itself. The purpose of this study was to investigate science teachers’ experience in using digital technology into science classroom. Through this study science teachers’ technological knowledge (TK) and technological content knowledge (TCK) can be unpacked. Descriptive method was used to depict science teachers’ TK and TCK through questionnaire that consisted of 20 questions. Subjects of this study were 25 science teachers in Bandung, Indonesia. The study was conducted in the context of teacher professional training. Result shows that science teachers still have less TK, yet they have high TCK. The teachers consider characteristics of concepts as main aspect for implementing technology into science teaching. This finding describes teachers’ high technological content knowledge. Meanwhile, science teachers’ technological knowledge was found to be still low since only few of them who can exemplify digital technology that can be implemented into several science concept. Therefore, training about technology implementation into science teaching and learning is necessary as a means to improve teachers’ technological knowledge.

75 FR 62686 - Health Information Technology: Revisions to Initial Set of Standards, Implementation...

Science.gov (United States)

2010-10-13

... Health Information Technology: Revisions to Initial Set of Standards, Implementation Specifications, and... Health Information Technology (ONC), Department of Health and Human Services. ACTION: Interim final rule... Coordinator for Health Information Technology, Attention: Steven Posnack, Hubert H. Humphrey Building, Suite...

A comparison of two Shuttle launch and entry suits - Reach envelope, isokinetic strength, and treadmill tests

Science.gov (United States)

Schafer, Lauren E.; Rajulu, Sudhakar L.; Klute, Glenn K.

1992-01-01

A quantification has been conducted of any existing differences between the performance, in operational conditions, of the Space Shuttle crew Launch Entry Suit (LES) and the new Advanced Crew Escape Suit (ACES). While LES is a partial-pressure suit, the ACES system which is being considered as a replacement for LES is a full-pressure suit. Three tests have been conducted with six subjects to ascertain the suits' reach envelope, strength, and treadmill performance. No significant operational differences were found between the two suit designs.

Feasibility of the iPad as a hub for smart house technology in the elderly; effects of cognition, self-efficacy, and technology experience.

Science.gov (United States)

Alvseike, Hilde; Brønnick, Kolbjørn

2012-01-01

Smart house technology using tablet computers may help older people to master activities of daily living by making it easier to perform daily tasks like controlling lights and indoor temperature throughout the house with a few keystrokes. The aim of this study was to investigate the impact of age, cognition, self-efficacy, and technology experience on the ability of older people to perceive and use iPad tablet computers for this purpose. Twenty-eight participants were interviewed using a structured interview guide and questionnaires, and a practical test of how to use the iPad was performed. The Mini-Mental State Examination (MMSE) was used to assess cognition. Cognitive deficits and low self-efficacy significantly reduced the ability of the subjects to use the smart house technology and to perceive the smart house technology service as provided. Age was unrelated to the outcome variables. Finally, technology experience had an effect on technology perception. If further research supports these findings, it should influence smart-house implementation in an elderly population, raising awareness of usability problems in older people with low self-efficacy and cognitive problems.

Older individuals' experiences during the assistive technology device service delivery process.

Science.gov (United States)

Gramstad, Astrid; Storli, Sissel Lisa; Hamran, Torunn

2014-07-01

Providing assistive technology devices to older individuals living in their ordinary homes is an important intervention to increase and sustain independence and to enable ageing at home. However, little is known about older individuals' experiences and needs in the assistive technology device (ATD) service delivery process. The purpose of this study was to investigate older individuals' experiences during the service delivery process of ATDs. Nine older individuals were interviewed three times each throughout the ATD service delivery process. The interviews were analysed within a hermeneutical phenomenological perspective. The results show that the service delivery process could be interpreted as an enigmatic journey and described using four themes: "hope and optimistic expectations", "managing after delivery or needing additional help", "having available help versus being abandoned", and "taking charge or putting up". The results emphasize the need for occupational therapists to maintain an individualized approach towards older clients throughout the service delivery process. The experiences of older individuals were diverse and related to expectations that were not necessarily articulated to the occupational therapist. The situation when the ATD is delivered to the client was highlighted by the clients as an important event with the potential to facilitate a successful service delivery process.

A Parametric Model of Shoulder Articulation for Virtual Assessment of Space Suit Fit

Science.gov (United States)

Kim, K. Han; Young, Karen S.; Bernal, Yaritza; Boppana, Abhishektha; Vu, Linh Q.; Benson, Elizabeth A.; Jarvis, Sarah; Rajulu, Sudhakar L.

2016-01-01

Suboptimal suit fit is a known risk factor for crewmember shoulder injury. Suit fit assessment is however prohibitively time consuming and cannot be generalized across wide variations of body shapes and poses. In this work, we have developed a new design tool based on the statistical analysis of body shape scans. This tool is aimed at predicting the skin deformation and shape variations for any body size and shoulder pose for a target population. This new process, when incorporated with CAD software, will enable virtual suit fit assessments, predictively quantifying the contact volume, and clearance between the suit and body surface at reduced time and cost.

``Recent experiences and future expectations in data storage technology''

Science.gov (United States)

Pfister, Jack

1990-08-01

For more than 10 years the conventional media for High Energy Physics has been 9 track magnetic tape in various densities. More recently, especially in Europe, the IBM 3480 technology has been adopted while in the United States, especially at Fermilab, 8 mm is being used by the largest experiments as a primary recording media and where possible they are using 8 mm for the production, analysis and distribution of data summary tapes. VHS and Digital Audio tape have recurrently appeared but seem to serve primarily as a back-up storage media. The reasons for what appear to be a radical departure are many. Economics (media and controllers are inexpensive), form factor (two gigabytes per shirt pocket), and convenience (fewer mounts/dismounts per minute) are dominant among the reasons. The traditional data media suppliers seem to have been content to evolve the traditional media at their own pace with only modest enhancements primarily in ``value engineering'' of extant products. Meanwhile, start-up companies providing small system and workstations sought other media both to reduce the price of their offerings and respond to the real need of lower cost back-up for lower cost systems. This happening in a market context where traditional computer systems vendors were leaving the tape market altogether or shifting to ``3480'' technology which has certainly created a climate for reconsideration and change. The newest data storage products, in most cases, are not coming from the technologies developed by the computing industry but by the audio and video industry. Just where these flopticals, opticals, 19 mm tape and the new underlying technologies, such as, ``digital paper'' may fit in the HEP computing requirement picture will be reviewed. What these technologies do for and to HEP will be discussed along with some suggestions for a methodology for tracking and evaluating extant and emerging technologies.

Experience with a run file archive using database technology

International Nuclear Information System (INIS)

Nixdorf, U.

1993-12-01

High Energy Physics experiments are known for their production of large amounts of data. Even small projects may have to manage several Giga Byte of event information. One possible solution for the management of this data is to use today's technology to archive the raw data files in tertiary storage and build on-line catalogs which reference interesting data. This approach has been taken by the Gammas, Electrons and Muons (GEM) Collaboration for their evaluation of muon chamber technologies at the Superconducting Super Collider Laboratory (SSCL). Several technologies were installed and tested during a 6 month period. Events produced were first recorded in the UNIX filesystem of the data acquisition system and then migrated to the Physics Detector Simulation Facility (PDSF) for long term storage. The software system makes use of a commercial relational database management system (SYBASE) and the Data Management System (DMS), a tape archival system developed at the SSCL. The components are distributed among several machines inside and outside PDSF. A Motif-based graphical user interface (GUI) enables physicists to retrieve interesting runs from the archive using the on-line database catalog

Enhancements to the opera-3d suite

International Nuclear Information System (INIS)

Riley, C.P.

1997-01-01

The OPERA-3D suite of programs has been enhanced to include 2 additional 3 dimensional finite element based solvers, with complimentary features in the pre- and postprocessing. SOPRANO computes electromagnetic fields at high frequency including displacement current effects. It has 2 modules emdash a deterministic solution at a user defined frequency and an eigenvalue solution for modal analysis. It is suitable for designing microwave structures and cavities found in particle accelerators. SCALA computes electrostatic fields in the presence of space charge from charged particle beams. The user may define the emission characteristics of electrodes or plasma surfaces and compute the resultant space charge limited beams, including the presence of magnetic fields. Typical applications in particle accelerators are electron guns and ion sources. Other enhancements to the suite include additional capabilities in TOSCA and ELEKTRA, the static and dynamic solvers. copyright 1997 American Institute of Physics

The Sample Analysis at Mars Investigation and Instrument Suite

Science.gov (United States)

Mahaffy, Paul; Webster, Christopher R.; Conrad, Pamela G.; Arvey, Robert; Bleacher, Lora; Brinckerhoff, William B.; Eigenbrode, Jennifer L.; Chalmers, Robert A.; Dworkin, Jason P.; Errigo, Therese;

Gaze-based assistive technology used in daily life by children with severe physical impairments - parents' experiences

OpenAIRE

Borgestig, Maria; Rytterstrom, Patrik; Hemmingsson, Helena

2017-01-01

Objective: To describe and explore parents' experiences when their children with severe physical impairments receive gaze-based assistive technology (gaze-based assistive technology (AT)) for use in daily life. Methods: Semi-structured interviews were conducted twice, with one year in between, with parents of eight children with cerebral palsy that used gaze-based AT in their daily activities. To understand the parents' experiences, hermeneutical interpretations were used during data analysis...

Potential of a suite of robot/computer-assisted motivating systems for personalized, home-based, stroke rehabilitation

Directory of Open Access Journals (Sweden)

Feng Xin

2007-03-01

Full Text Available Abstract Background There is a need to improve semi-autonomous stroke therapy in home environments often characterized by low supervision of clinical experts and low extrinsic motivation. Our distributed device approach to this problem consists of an integrated suite of low-cost robotic/computer-assistive technologies driven by a novel universal access software framework called UniTherapy. Our design strategy for personalizing the therapy, providing extrinsic motivation and outcome assessment is presented and evaluated. Methods Three studies were conducted to evaluate the potential of the suite. A conventional force-reflecting joystick, a modified joystick therapy platform (TheraJoy, and a steering wheel platform (TheraDrive were tested separately with the UniTherapy software. Stroke subjects with hemiparesis and able-bodied subjects completed tracking activities with the devices in different positions. We quantify motor performance across subject groups and across device platforms and muscle activation across devices at two positions in the arm workspace. Results Trends in the assessment metrics were consistent across devices with able-bodied and high functioning strokes subjects being significantly more accurate and quicker in their motor performance than low functioning subjects. Muscle activation patterns were different for shoulder and elbow across different devices and locations. Conclusion The Robot/CAMR suite has potential for stroke rehabilitation. By manipulating hardware and software variables, we can create personalized therapy environments that engage patients, address their therapy need, and track their progress. A larger longitudinal study is still needed to evaluate these systems in under-supervised environments such as the home.

The use of antigravity suits in the treatment of idiopathic orthostatic hypotension

Science.gov (United States)

Landmark, K.; Kravik, S.

1980-01-01

Idiopathic orthostatic hypotension is an uncommon disease characterized by a drop in blood pressure when going from a recumbent to a standing position. Treatment by medication generally produces poor results. Three patients at the Royal Hospital in Oslo were treated with antigravity suits and all were able to maintain adequate blood pressures in the standing position. One patient improved dramatically and was able to take short walks while wearing the suit. The two other patients, however, felt that wearing the suits eventually became uncomfortable. This treatment represents a useful treatment alternative for intractable cases.

Controlatron Neutron Tube Test Suite Software Manual - Operation Manual (V2.2)

CERN Document Server

Noel, W P; Hertrich, R J; Martinez, M L; Wallace, D L

2002-01-01

The Controlatron Software Suite is a custom built application to perform automated testing of Controlatron neutron tubes. The software package was designed to allowing users to design tests and to run a series of test suites on a tube. The data is output to ASCII files of a pre-defined format for data analysis and viewing with the Controlatron Data Viewer Application. This manual discusses the operation of the Controlatron Test Suite Software and a brief discussion of state machine theory, as state machine is the functional basis of the software.

Equation-of-State Test Suite for the DYNA3D Code

Energy Technology Data Exchange (ETDEWEB)

Benjamin, Russell D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2015-11-05

This document describes the creation and implementation of a test suite for the Equationof- State models in the DYNA3D code. A customized input deck has been created for each model, as well as a script that extracts the relevant data from the high-speed edit file created by DYNA3D. Each equation-of-state model is broken apart and individual elements of the model are tested, as well as testing the entire model. The input deck for each model is described and the results of the tests are discussed. The intent of this work is to add this test suite to the validation suite presently used for DYNA3D.

Total Ionizing Dose effects in 130-nm commercial CMOS technologies for HEP experiments

CERN Document Server

Gonella, L; Silvestri, M; Gerardin, S; Pantano, D; Re, V; Manghisoni, M; Ratti, L; Ranieri, A

2007-01-01

The impact of foundry-to-foundry variability and bias conditions during irradiation on the Total Ionizing Dose (TID) response of commercial 130-nm CMOS technologies have been investigated for applications in High Energy Physics (HEP) experiments. n- and p-channel MOSFETs from three different manufacturers have been irradiated with X-rays up to more than 100 Mrad (SiO2). Even though the effects of TID are qualitatively similar, the amount of degradation is shown to vary considerably from foundry to foundry, probably depending on the processing of the STI oxide and/or doping profile in the substrate. The bias during irradiation showed to have a strong impact as well on the TID response, proving that exposure at worst case bias conditions largely overestimates the degradation a device may experience during its lifetime. Overall, our results increase the confidence that 130-nm CMOS technologies can be used in future HEP experiments even without Hardness-By-Design solutions, provided that constant monitoring of th...

A transitional alkalic dolerite dike suite of Mesozoic age in Southeastern New England

Science.gov (United States)

Hermes, O. Don; Rao, J. M.; Dickenson, M. P.; Pierce, T. A.

1984-12-01

Dike rocks from the New England platform of Rhode Island and adjacent Massachusetts consist of premetamorphic and post-metamorphic suites. The older group includes metamorphosed dolerite, minette, and schistose dioritic rocks. Post-metamorphic dikes consist of dolerite and sparse monchiquite. The post-metamorphic dolerites are of comparable age to the Eastern North American dolerite suite associated with the Mesozoic basins along the eastern seaboard of North America. However, the southeastern New England dolerites exhibit mineralogy and chemistry more typical of a transitional alkalic suite compared to the more subalkalic tholeiitic dolerites of the Eastern North American suite. Both suites are compatible with a rift tectonic setting, but the more alkalic dolerites may represent a deeper source of small volume melts compared to the Eastern North American dolerites. These more alkaline melts may have concentrated at local centers, or they may be typical of flank dolerites as opposed to the less alkalic varieties that occur within the central axial rift.

Compression under a mechanical counter pressure space suit glove

Science.gov (United States)

Waldie, James M A.; Tanaka, Kunihiko; Tourbier, Dietmar; Webb, Paul; Jarvis, Christine W.; Hargens, Alan R.

2002-01-01

Background: Current gas-pressurized space suits are bulky stiff shells severely limiting astronaut function and capability. A mechanical counter pressure (MCP) space suit in the form of a tight elastic garment could dramatically improve extravehicular activity (EVA) dexterity, but also be advantageous in safety, cost, mass and volume. The purpose of this study was to verify that a prototype MCP glove exerts the design compression of 200 mmHg, a pressure similar to the current NASA EVA suit. Methods: Seven male subjects donned a pressure measurement array and MCP glove on the right hand, which was placed into a partial vacuum chamber. Average compression was recorded on the palm, the bottom of the middle finger, the top of the middle finger and the dorsum of the hand at pressures of 760 (ambient), 660 and 580 mmHg. The vacuum chamber was used to simulate the pressure difference between the low breathing pressure of the current NASA space suits (approximately 200 mmHg) and an unprotected hand in space. Results: At ambient conditions, the MCP glove compressed the dorsum of the hand at 203.5 +/- 22.7 mmHg, the bottom of the middle finger at 179.4 +/- 16.0 mmHg, and the top of the middle finger at 183.8 +/- 22.6 mmHg. The palm compression was significantly lower (59.6 +/- 18.8 mmHg, pglove compression with the chamber pressure reductions. Conclusions: The MCP glove compressed the dorsum of the hand and middle finger at the design pressure.

CTBT verification-related technologies for peaceful purposes: the French experiences of international cooperation

International Nuclear Information System (INIS)

Massinon, B.

1999-01-01

The French experience concerning CTBT verification-related technologies for peaceful purposes as well a the international cooperation in this field are presented. Possible objectives and cooperation program needs are cited. French experience in international cooperation is related to seismology and seismic hazards in Bolivia, Madagascar, Nepal and Indonesia and is considered as very constructive, meaning that technical experience is developed, consistent scientific results are obtained, and a considerable yield to the CTBT task is achieved. Large scientific benefits are expected from the CTBTO

STS-87 Mission Specialist Winston E. Scott suits up

Science.gov (United States)

1997-01-01

STS-87 Mission Specialist Winston Scott dons his launch and entry suit with the assistance of a suit technician in the Operations and Checkout Building. This is Scotts second space flight. He and the five other crew members will depart shortly for Launch Pad 39B, where the Space Shuttle Columbia awaits liftoff on a 16-day mission to perform microgravity and solar research. Scott is scheduled to perform an extravehicular activity spacewalk with Mission Specialist Takao Doi, Ph.D., of the National Space Development Agency of Japan, during STS-87. He also performed a spacewalk on STS-72.

Large-scale laboratory testing of bedload-monitoring technologies: overview of the StreamLab06 Experiments

Science.gov (United States)

Marr, Jeffrey D.G.; Gray, John R.; Davis, Broderick E.; Ellis, Chris; Johnson, Sara; Gray, John R.; Laronne, Jonathan B.; Marr, Jeffrey D.G.

2010-01-01

A 3-month-long, large-scale flume experiment involving research and testing of selected conventional and surrogate bedload-monitoring technologies was conducted in the Main Channel at the St. Anthony Falls Laboratory under the auspices of the National Center for Earth-surface Dynamics. These experiments, dubbed StreamLab06, involved 25 researchers and volunteers from academia, government, and the private sector. The research channel was equipped with a sediment-recirculation system and a sediment-flux monitoring system that allowed continuous measurement of sediment flux in the flume and provided a data set by which samplers were evaluated. Selected bedload-measurement technologies were tested under a range of flow and sediment-transport conditions. The experiment was conducted in two phases. The bed material in phase I was well-sorted siliceous sand (0.6-1.8 mm median diameter). A gravel mixture (1-32 mm median diameter) composed the bed material in phase II. Four conventional bedload samplers – a standard Helley-Smith, Elwha, BLH-84, and Toutle River II (TR-2) sampler – were manually deployed as part of both experiment phases. Bedload traps were deployed in study Phase II. Two surrogate bedload samplers – stationarymounted down-looking 600 kHz and 1200 kHz acoustic Doppler current profilers – were deployed in experiment phase II. This paper presents an overview of the experiment including the specific data-collection technologies used and the ambient hydraulic, sediment-transport and environmental conditions measured as part of the experiment. All data collected as part of the StreamLab06 experiments are, or will be available to the research community.

Virtual Suit Fit Assessment Using Body Shape Model

Data.gov (United States)

National Aeronautics and Space Administration — Shoulder injury is one of the most serious risks for crewmembers in long-duration spaceflight. While suboptimal suit fit and contact pressures between the shoulder...

Cost development of future technologies for power generation-A study based on experience curves and complementary bottom-up assessments

International Nuclear Information System (INIS)

Neij, Lena

2008-01-01

Technology foresight studies have become an important tool in identifying realistic ways of reducing the impact of modern energy systems on the climate and the environment. Studies on the future cost development of advanced energy technologies are of special interest. One approach widely adopted for the analysis of future cost is the experience curve approach. The question is, however, how robust this approach is, and which experience curves should be used in energy foresight analysis. This paper presents an analytical framework for the analysis of future cost development of new energy technologies for electricity generation; the analytical framework is based on an assessment of available experience curves, complemented with bottom-up analysis of sources of cost reductions and, for some technologies, judgmental expert assessments of long-term development paths. The results of these three methods agree in most cases, i.e. the cost (price) reductions described by the experience curves match the incremental cost reduction described in the bottom-up analysis and the judgmental expert assessments. For some technologies, the bottom-up analysis confirms large uncertainties in future cost development not captured by the experience curves. Experience curves with a learning rate ranging from 0% to 20% are suggested for the analysis of future cost development

Clean coal technology - Study on the pilot project experiment of underground coal gasification

International Nuclear Information System (INIS)

Yang Lanhe; Liang Jie; Yu Li

2003-01-01

In this paper, the gasification conditions, the gasifier structure, the measuring system and the gasification rationale of a pilot project experiment of underground coal gasification (UCG) in the Liuzhuang Colliery, Tangshan, are illustrated. The technique of two-phase underground coal gasification is proposed. The detection of the moving speed and the length of the gasification working face is made using radon probing technology. An analysis of the experiment results indicates that the output of air gas is 3000 m 3 /h with a heating value of about 4.18 MJ/m 3 , while the output of water gas is 2000 m 3 /h with a heating value of over 11.00 MJ/m 3 , of which H 2 content is above 40% with a maximum of 71.68%. The cyclical time of two-phase underground gasification is 16 h, with 8 h for each phase. This prolongs the time when the high-heating value gas is produced. The moving speed of the gasification working face in two alternative gasifiers is identified, i.e. 0.204 and 0.487 m/d, respectively. The success of the pilot project experiment of the underground gasification reveals the strides that have been made toward the commercialization of the UCG in China. It also further justifies the reasonability and feasibility of the new technology of long channel, big section, two-phase underground gasification. A conclusion is also drawn that the technology of the pilot project experiment can be popularized in old and discarded coal mines

Impact of Mars sand on dust on the design of space suits and life support equipment: A technology assessment

Science.gov (United States)

Simonds, Charles H.

1991-01-01

Space suits and life support equipment will come in intimate contact with Martian soil as aerosols, wind blown particles and material thrown up by men and equipment on the Martian surface. For purposes of this discussion the soil is assumed to consist of a mixture of cominuted feldspar, pyroxene, olivine, quartz, titanomagnetite and other anhydrous and hydrous iron bearing oxides, clay minerals, scapolite and water soluble chlorides and sulfates. The soil may have photoactivated surfaces that acts as a strong oxidizer with behavior similar to hydrogen peroxide. The existing data about the Mars soil suggests that the dust and sand will require designs analogous to those uses on equipment exposed to salty air and blowing sand and dust. The major design challenges are in developing high performance radiators which can be cleaned after each EVA without degradation, designing seals that are readily cleaned and possibly in selecting materials which will not be degraded by any strong oxidants in the soil. The magnitude of the dust filtration challenge needs careful evaluation in terms of the trade off between fine-particle dust filters with low pressure drop that are either physically large and heavy, like filter baghouses require frequent replacement of filter elements, of low volume high pressure thus power consumption approaches, or washable filters. In the latter, filter elements are cleaned with water, as could the outsides of the space suits in the airlock.

Impact of Mars sand on dust on the design of space suits and life support equipment: A technology assessment

Science.gov (United States)

Simonds, Charles H.

1991-05-01

Space suits and life support equipment will come in intimate contact with Martian soil as aerosols, wind blown particles and material thrown up by men and equipment on the Martian surface. For purposes of this discussion the soil is assumed to consist of a mixture of cominuted feldspar, pyroxene, olivine, quartz, titanomagnetite and other anhydrous and hydrous iron bearing oxides, clay minerals, scapolite and water soluble chlorides and sulfates. The soil may have photoactivated surfaces that acts as a strong oxidizer with behavior similar to hydrogen peroxide. The existing data about the Mars soil suggests that the dust and sand will require designs analogous to those uses on equipment exposed to salty air and blowing sand and dust. The major design challenges are in developing high performance radiators which can be cleaned after each EVA without degradation, designing seals that are readily cleaned and possibly in selecting materials which will not be degraded by any strong oxidants in the soil. The magnitude of the dust filtration challenge needs careful evaluation in terms of the trade off between fine-particle dust filters with low pressure drop that are either physically large and heavy, like filter baghouses require frequent replacement of filter elements, of low volume high pressure thus power consumption approaches, or washable filters. In the latter, filter elements are cleaned with water, as could the outsides of the space suits in the airlock.

The PyRosetta Toolkit: a graphical user interface for the Rosetta software suite.

Science.gov (United States)

Adolf-Bryfogle, Jared; Dunbrack, Roland L

2013-01-01

The Rosetta Molecular Modeling suite is a command-line-only collection of applications that enable high-resolution modeling and design of proteins and other molecules. Although extremely useful, Rosetta can be difficult to learn for scientists with little computational or programming experience. To that end, we have created a Graphical User Interface (GUI) for Rosetta, called the PyRosetta Toolkit, for creating and running protocols in Rosetta for common molecular modeling and protein design tasks and for analyzing the results of Rosetta calculations. The program is highly extensible so that developers can add new protocols and analysis tools to the PyRosetta Toolkit GUI.

What was uniform about the fin-de-siècle sailor suit?

Science.gov (United States)

Rose, Clare

2011-01-01

The sailor suits widely worn by children in late-nineteenth-century Britain have been interpreted at the time, and since, as expressions of an Imperial ethos. Yet, a closer examination of the ways that these garments were produced by mass manufacturers, mediated by advertisers and fashion advisors and consumed by families makes us question this characterization. Manufacturers interpreted sailor suits not as unchanging uniforms but as fashion items responding to seasonal changes. Consumers used them to assert social identities and social distinctions, selecting from the multiple variants available. Cultural commentators described sailor suits as emulating Royal practice—but also as ‘common’ and to be avoided. A close analysis of large samples of images and texts from the period 1870–1900 reveals how these different meanings overlapped, making the fin-de-siècle sailor suit a garment that undermines many of our assumptions.

A method of evaluating efficiency during space-suited work in a neutral buoyancy environment

Science.gov (United States)

Greenisen, Michael C.; West, Phillip; Newton, Frederick K.; Gilbert, John H.; Squires, William G.

1991-01-01

The purpose was to investigate efficiency as related to the work transmission and the metabolic cost of various extravehicular activity (EVA) tasks during simulated microgravity (whole body water immersion) using three space suits. Two new prototype space station suits, AX-5 and MKIII, are pressurized at 57.2 kPa and were tested concurrently with the operationally used 29.6 kPa shuttle suit. Four male astronauts were asked to perform a fatigue trial on four upper extremity exercises during which metabolic rate and work output were measured and efficiency was calculated in each suit. The activities were selected to simulate actual EVA tasks. The test article was an underwater dynamometry system to which the astronauts were secured by foot restraints. All metabolic data was acquired, calculated, and stored using a computerized indirect calorimetry system connected to the suit ventilation/gas supply control console. During the efficiency testing, steady state metabolic rate could be evaluated as well as work transmitted to the dynamometer. Mechanical efficiency could then be calculated for each astronaut in each suit performing each movement.

Laser transmitter for Lidar In-Space Technology Experiment

Science.gov (United States)

Chang, John; Cimolino, Marc; Petros, Mulugeta

1991-01-01

The Lidar In-Space Technology Experiment (LITE) Laser Transmitter Module (LTM) flight laser optical architecture has been space qualified by extensive testing at the system, subsystem and component level. The projected system output performance has been verified using an optically and electrically similar breadboard version of the laser. Parasitic lasing was closely examined and completely suppressed after design changes were implemented and tested. Oscillator and amplifier type heads were separately tested to 150 million shots. Critical subassemblies have undergone environmental testing to Shuttle qualification levels. A superior three color anti-reflection coating was developed and tested for use on 14 surfaces after the final amplifier.

Design, operation, and safety of single-room interventional MRI suites: practical experience from two centers.

Science.gov (United States)

White, Mark J; Thornton, John S; Hawkes, David J; Hill, Derek L G; Kitchen, Neil; Mancini, Laura; McEvoy, Andrew W; Razavi, Reza; Wilson, Sally; Yousry, Tarek; Keevil, Stephen F

2015-01-01

The design and operation of a facility in which a magnetic resonance imaging (MRI) scanner is incorporated into a room used for surgical or endovascular cardiac interventions presents several challenges. MR safety must be maintained in the presence of a much wider variety of equipment than is found in a diagnostic unit, and of staff unfamiliar with the MRI environment, without compromising the safety and practicality of the interventional procedure. Both the MR-guided cardiac interventional unit at Kings College London and the intraoperative imaging suite at the National Hospital for Neurology and Neurosurgery are single-room interventional facilities incorporating 1.5 T cylindrical-bore MRI scanners. The two units employ similar strategies to maintain MR safety, both in original design and day-to-day operational workflows, and between them over a decade of incident-free practice has been accumulated. This article outlines these strategies, highlighting both similarities and differences between the units, as well as some lessons learned and resulting procedural changes made in both units since installation. © 2014 Wiley Periodicals, Inc.

The impact of technology on the wilderness experience: A review of common themes and approaches in three bodies of literature

Science.gov (United States)

John Shultis

2012-01-01

In the last decade, increasing concern has been expressed about the impact of new technologies - especially communication technologies - on the wilderness experience. Many authors have suggested a tipping point has been reached, with new technologies changing the very nature of the 'traditional' wilderness experience in various ways. The loss of direct...

Specifications and test procedures for airline-type supplied-air suits

International Nuclear Information System (INIS)

Revoir, W.H.; Pritchard, J.A.; Davis, T.O.; Richards, C.P.; Wheat, L.D.

1975-05-01

Procedures and requirements have been established to permit airline-type supplied-air suits needed by contractors of the Energy Research and Development Administration to be tested for performance by the Respirator Research and Development Section, Industrial Hygiene Group, of the Los Alamos Scientific Laboratory, and to have the adequacy of the performance of these devices evaluated by the Los Alamos Scientific Laboratory Respirator Advisory Committee. Test equipment, test methods, and performance criteria for airline-type supplied-air suits are prescribed. (U.S.)

Rifkin takes another shot at UC experiment.

Science.gov (United States)

Norman, C

1984-04-27

Activist Jeremy Rifkin has again filed suit to block an experiment by researchers at the University of California at Berkeley involving genetically engineered bacteria. A field test was originally scheduled for 1983 after approval by the National Institutes of Health's Recombinant DNA Advisory Committee, but was delayed after legal action by Rifkin. With that suit still pending, Rifkin filed another when plans were made to go ahead with the test in spring 1984. A ruling on the recent action is expected at the end of April, and the first suit may go to trial in summer 1984.

Characterization of dynamic thermal control schemes and heat transfer pathways for incorporating variable emissivity electrochromic materials into a space suit heat rejection system

Science.gov (United States)

Massina, Christopher James

radiator architecture is considered to be at a technology readiness level of 3/4, indicating that analytical proof-of-concept and component level validation in a laboratory environment have been completed. While this is not a numeric increase from previous investigations, these contributions are a significant iteration within those levels. These results improve the understanding of the capabilities provided by the full suit, variable emissivity architecture.

Fluid replacement advice during work in fully encapsulated impermeable chemical protective suits

NARCIS (Netherlands)

Rubenstein, C.D.; Hartog, E.A. den; Deaton, A.S.; Bogerd, C.P.; Kant, S. de

2017-01-01

A major concern for responders to hazardous materials (HazMat) incidents is the heat strain that is caused by fully encapsulated impermeable chemical protective suits. In a research project, funded by the US Department of Defense, the thermal strain experienced when wearing these suits was studied.

New tools and technology for the study of human performance in simulator experiments

International Nuclear Information System (INIS)

Droeivoldsmo, Asgeir

2004-04-01

The Halden Virtual Reality Centre has for the last four years reported a number of experiments in the area of real world application of virtual and augmented reality technology. The insights from these studies have been reviewed and reported as part of a PhD-thesis submitted at the Norwegian University of Science and Technology. This report is based on the thesis and contains a theoretical discussion of how the virtual and augmented reality technology could be used to extend human operator performance in control rooms to include co-operation with plant floor personnel and interaction with not already built equipment. This thesis suggests that new tools and technology can be used for production of relevant data and insights from the study of human performance in simulator and field experiments. It examines some of the theoretical perspectives behind data collection and human performance assessment, and argues for a high resemblance of the real world and use of subject matter expertise in simulator studies. A model is proposed, suggesting that human performance measurement should be tightly coupled to the topic of study and have a close connection to the time line. This coupling requires new techniques for continuous data collection, and eye movement tracking has been identified as a promising basis for this type of measures. One way of improving realism is to create virtual environments allowing for controlling more of the environment surrounding the test subjects. New application areas for virtual environments are discussed for use in control room and field studies. The combination of wearable computing, virtual and augmented (the use of computers to overlay virtual information onto the real world) reality provides many new possibilities to present information to operators. In two experiments, virtual and augmented reality techniques were used to visualise radiation fields for operators in a contaminated nuclear environment. This way the operators could train for

Effect of fastskin suits on performance, drag, and energy cost of swimming.

Science.gov (United States)

Chatard, Jean-Claude; Wilson, Barry

2008-06-01

To investigate the effect of fastskin suits on 25- to 800-m performances, drag, and energy cost of swimming. The performances, stroke rate and distance per stroke, were measured for 14 competitive swimmers in a 25-m pool, when wearing a normal suit (N) and when wearing a full-body suit (FB) or a waist-to-ankle suit (L). Passive drag, oxygen uptake, blood lactate, and the perceived exertion were measured in a flume. There was a 3.2% +/- 2.4% performance benefit for all subjects over the six distances covered at maximal speed wearing FB and L when compared with N. When wearing L, the gain was significantly lower (1.8% +/- 2.5%, P energy cost of swimming was significantly reduced when wearing FB and L by 4.5% +/- 5.4% and 5.5% +/- 3.1%, respectively (P energy cost of submaximal swimming and an increased distance per stroke, at the same stroke rates, and reduced freestyle performance time.

Students' Perceptions of and Experiences With Educational Technology: A Survey.

Science.gov (United States)

Royal, Kenneth; Hedgpeth, Mari-Wells; McWhorter, Dan

2016-05-18

It is generally assumed that incoming students in medical education programs will be better equipped for the "digital age" given their younger age and an educational upbringing in which technology was seemingly omnipresent. In particular, many assume that today's medical students are more likely to hold positive attitudes and increased comfortability with technology and possess greater information technology (IT) skills. The purpose of this study was to compare responses of incoming veterinary medical students to a series of IT-related questions contained in a common questionnaire over the course of a 10-year period (2005-2015) to discern whether students' attitudes have improved and uses and comfortability with technology have increased as anticipated. A survey measuring attitudes and preferences, computing experience, and technology ownership was administered each year for the past 10 years to incoming veterinary medical students at a large veterinary school in the United States. Students' responses to survey items were compared at 3 data points (2005, 2010, and 2015). Today's incoming veterinary medical students tend to indicate the same desire to improve skills using spreadsheets and web page design as incoming students from 10 years ago. It seems that despite technological advances and increased exposure to such applications and skills, there remains a challenge for students to "keep up" with the ever evolving technology. Moreover, although students continue to report they are very comfortable with using a computer (and related devices), many use their computers as typewriters or word processors, as opposed to a means for performing more advanced computing functions. In general, today's medical students are not expert computer users as many assume. Despite an upbringing in a digitized world, many students still lack many basic computing skills.

Carbon Dioxide Washout Testing Using Various Inlet Vent Configurations in the Mark-III Space Suit

Science.gov (United States)

Korona, F. Adam; Norcross, Jason; Conger, Bruce; Navarro, Moses

2014-01-01

Requirements for using a space suit during ground testing include providing adequate carbon dioxide (CO2) washout for the suited subject. Acute CO2 exposure can lead to symptoms including headache, dyspnea, lethargy, and eventually unconsciousness or even death. Symptoms depend on several factors including inspired partial pressure of CO2 (ppCO2), duration of exposure, metabolic rate of the subject, and physiological differences between subjects. Computational Fluid Dynamics (CFD) analysis has predicted that the configuration of the suit inlet vent has a significant effect on oronasal CO2 concentrations. The main objective of this test was to characterize inspired oronasal ppCO2 for a variety of inlet vent configurations in the Mark-III suit across a range of workload and flow rates. Data and trends observed during testing along with refined CFD models will be used to help design an inlet vent configuration for the Z-2 space suit. The testing methodology used in this test builds upon past CO2 washout testing performed on the Z-1 suit, Rear Entry I-Suit, and the Enhanced Mobility Advanced Crew Escape Suit. Three subjects performed two test sessions each in the Mark-III suit to allow for comparison between tests. Six different helmet inlet vent configurations were evaluated during each test session. Suit pressure was maintained at 4.3 psid. Suited test subjects walked on a treadmill to generate metabolic workloads of approximately 2000 and 3000 BTU/hr. Supply airflow rates of 6 and 4 actual cubic feet per minute were tested at each workload. Subjects wore an oronasal mask with an open port in front of the mouth and were allowed to breathe freely. Oronasal ppCO2 was monitored real-time via gas analyzers with sampling tubes connected to the oronasal mask. Metabolic rate was calculated from the CO2 production measured by an additional gas analyzer at the air outlet from the suit. Real-time metabolic rate measurements were used to adjust the treadmill workload to meet

U.S. Climate Normals Product Suite (1981-2010)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The NOAA Climate Normals are a large suite of data products that provide users with many tools to understand typical climate conditions for thousands of locations...

Learning to teach mathematics with technology: A survey of professional development needs, experiences and impacts

Science.gov (United States)

Bennison, Anne; Goos, Merrilyn

2010-04-01

The potential for digital technologies to enhance students' mathematics learning is widely recognised, and use of computers and graphics calculators is now encouraged or required by secondary school mathematics curriculum documents throughout Australia. However, previous research indicates that effective integration of technology into classroom practice remains patchy, with factors such as teacher knowledge, confidence, experience and beliefs, access to resources, and participation in professional development influencing uptake and implementation. This paper reports on a large-scale survey of technology-related professional development experiences and needs of Queensland secondary mathematics teachers. Teachers who had participated in professional development were found to be more confident in using technology and more convinced of its benefits in supporting students' learning of mathematics. Experienced, specialist mathematics teachers in large metropolitan schools were more likely than others to have attended technology-related professional development, with lack of time and limited access to resources acting as hindrances to many. Teachers expressed a clear preference for professional development that helps them meaningfully integrate technology into lessons to improve student learning of specific mathematical topics. These findings have implications for the design and delivery of professional development that improves teachers' knowledge, understanding, and skills in a diverse range of contexts.

Modeling, analysis and experiments for fusion nuclear technology

International Nuclear Information System (INIS)

Abdou, M.A.; Hadid, A.H.; Raffray, A.R.; Tillack, M.S.; Iizuka, T.

1988-01-01

Selected issues in the development of fusion nuclear technology (FNT) have been studied. These relate to (1) near-term experiments, modeling, and analysis for several key FNT issues, and (2) FNT testing in future fusion facilities. A key concern for solid breeder blankets is to reduce the number of candidate materials and configurations for advanced experiments to emphasize those with the highest potential. Based on technical analysis, recommendations have been developed for reducing the size of the test matrix and for focusing the testing program on important areas of emphasis. The characteristics of an advanced liquid metal MHD experiment have also been studied. This facility is required in addition to existing facilities in order to address critical uncertainties in MHD fluid flow and heat transfer. In addition to experiments, successful development of FNT will require models for interpreting experimental data, for planning experiments, and for use as a design tool for fusion components. Modeling of liquid metal fluid flows is a particular area of need in which substantial progress is expected, and initial efforts are reported here. Preliminary results on the modeling of tritium transport and inventory in solid breeders are also summarized. Finally, the thermo-mechanical behavior of liquid-metal-cooled limiters is analyzed and the parameter space for feasible designs is explored. Because of the renewed strong interest in a fusion engineering facility, a critical review and analysis of the important FNT testing requirements have been performed. Several areas have been emphasized due to their strong impact on the design and cost of the test facility. These include (1) the length of the plasma burn and the mode of operation (pulsed vs. steady-state), and (2) the need for a tritium-producing blanket and its impact on the availability of the device. (orig.)

Development of an online men’s suits customizing system using heuristic procedure for wheelchair users

NARCIS (Netherlands)

Jeong, Minseok; Yang, Chuneun; You, Heecheon; Park, Kwangae; Lee, W.

2016-01-01

An online suit-customizing system for the special accessibility needs of wheelchair users should be developed because the demand for business suits by wheelchair users involved in economic activities has increased. This study
develops a user interface an online customizing system for men's suits

Emotional experience is subject to social and technological change: extrapolating to the future

OpenAIRE

Scherer, Klaus R.

2001-01-01

While the emotion mechanism is generally considered to be evolutionarily continuous, suggesting a certain degree of universality of emotional responding, there is evidence that emotional experience may differ across cultures and historical periods. This article extrapolates potential changes in future emotional experiences that can be expected to be caused by rapid social and technological change. Specifically, four issues are discussed: (1) the effect of social change on emotions that are st...

Role of ESLs in reaching BARC technologies to rural India - experience at Kaiga

International Nuclear Information System (INIS)

Nayak, P.D.; Ujjappa, K.M.; Ravi, P.M.; Hegde, A.G.

2009-01-01

Considering the various site selection requirements, most of the nuclear power plants in India under Nuclear Power Corporation of India Limited (NPCIL), are located in very remote locations. The Environmental Survey Laboratories (ESLs) under Health Physics Division, BARC are located at all Nuclear Power Stations. This paper presents the experience gained at ESL, KGS, Kaiga in acting as an interface between BARC, the technology developer and the rural public, the end user of the technology. (author)

The Virtual Arizona Experience

Science.gov (United States)

Allison, M. L.; Davis, R.; Conway, F. M.; Bellasai, R.

2012-12-01

To commemorate the once-in-a-lifetime event of Arizona's hundredth birthday, the Centennial Commission and the Governor of Arizona envisioned a museum and companion website that would capture the state's history, celebrate its people, and embrace its future. Working with world-renowned museum designers, the state began to seek ideas from across Arizona to create plans for a journey of discovery through science and the humanities. The museum would introduce visitors to some of the people who nurtured the state through its early years and others who are innovating its tomorrows. Showcases would include the resources and experiences that shaped the state's history and are transforming its present day, highlighting the ingenuity that tamed the wild frontier and is envisioning Arizona's next frontiers through science and technology. The Arizona Experience (www.arizonaexperience.org) was initially intended to serve as the web presence for the physical museum, but as delays occurred with the physical museum, the site has quickly developed an identify of its own as an interactive, multimedia experience, reaching a wider audience with functions that would be difficult or expensive to produce in a museum. As leaders in scientific and technological innovation in the state, the Arizona Geological Survey was tasked with designing and creating the Arizona Experience site. The general themes remain the same; however, the site has added content and applications that are better suited to the online environment in order to create a rich, dynamic supplement to a physical museum experience. The website offers the features and displays of the future museum with the interactive nature and learning environment of the web. This provides an encyclopedic overview of the State of Arizona by subject matter experts in a manner that is free and open to the public and erases socio-economic, political, and physical boundaries. Over the Centennial Year of 2012 the site will release a new theme and

High Performance Electrical Modeling and Simulation Verification Test Suite - Tier I; TOPICAL

International Nuclear Information System (INIS)

SCHELLS, REGINA L.; BOGDAN, CAROLYN W.; WIX, STEVEN D.

2001-01-01

This document describes the High Performance Electrical Modeling and Simulation (HPEMS) Global Verification Test Suite (VERTS). The VERTS is a regression test suite used for verification of the electrical circuit simulation codes currently being developed by the HPEMS code development team. This document contains descriptions of the Tier I test cases

Telemetry Standards, IRIG Standard 106-17, Chapter 22, Network Based Protocol Suite

Science.gov (United States)

2017-07-01

requirements. 22.2 Network Access Layer 22.2.1 Physical Layer Connectors and cable media should meet the electrical or optical properties required by the...Telemetry Standards, IRIG Standard 106-17 Chapter 22, July 2017 i CHAPTER 22 Network -Based Protocol Suite Acronyms...iii Chapter 22. Network -Based Protocol Suite

An integrative variant analysis suite for whole exome next-generation sequencing data

Directory of Open Access Journals (Sweden)

Challis Danny

2012-01-01

Full Text Available Abstract Background Whole exome capture sequencing allows researchers to cost-effectively sequence the coding regions of the genome. Although the exome capture sequencing methods have become routine and well established, there is currently a lack of tools specialized for variant calling in this type of data. Results Using statistical models trained on validated whole-exome capture sequencing data, the Atlas2 Suite is an integrative variant analysis pipeline optimized for variant discovery on all three of the widely used next generation sequencing platforms (SOLiD, Illumina, and Roche 454. The suite employs logistic regression models in conjunction with user-adjustable cutoffs to accurately separate true SNPs and INDELs from sequencing and mapping errors with high sensitivity (96.7%. Conclusion We have implemented the Atlas2 Suite and applied it to 92 whole exome samples from the 1000 Genomes Project. The Atlas2 Suite is available for download at http://sourceforge.net/projects/atlas2/. In addition to a command line version, the suite has been integrated into the Genboree Workbench, allowing biomedical scientists with minimal informatics expertise to remotely call, view, and further analyze variants through a simple web interface. The existing genomic databases displayed via the Genboree browser also streamline the process from variant discovery to functional genomics analysis, resulting in an off-the-shelf toolkit for the broader community.

Web: A Wireless Experiment Box for the Dextre Pointing Package ELC Payload

Science.gov (United States)

Bleier, Leor Z.; Marrero-Fontanez, Victor J.; Sparacino, Pietro A.; Moreau, Michael C.; Mitchell, Jason W.

2012-01-01

The Wireless Experiment Box (WEB) was proposed to work with the International Space Station (ISS) External Wireless Communication (EWC) system to support high-definition video from the Dextre Pointing Package (DPP). DPP/WEB was a NASA GSFC proposed ExPRESS Logistics Carrier (ELC) payload designed to flight test an integrated suite of Autonomous Rendezvous and Docking (AR&D) technologies to enable a wide spectrum of future missions across NASA and other US Government agencies. The ISS EWC uses COTS Wireless Access Points (WAPs) to provide high-rate bi-directional communications to ISS. In this paper, we discuss WEB s packaging, operation, antenna development, and performance testing.

WEB - A Wireless Experiment Box for the Dextre Pointing Package ELC Payload

Science.gov (United States)

Bleier, Leor Z.; Marrero-Fontanez, Victor J.; Sparacino, Pietro A.; Moreau, Michael C.; Mitchell, Jason William

2012-01-01

The Wireless Experiment Box (WEB) was proposed to work with the International Space Station (ISS) External Wireless Communication (EWC) system to support high-definition video from the Dextre Pointing Package (DPP). DPP/WEB was a NASA GSFC proposed ExPRESS Logistics Carrier (ELC) payload designed to flight test an integrated suite of Autonomous Rendezvous and Docking (AR&D) technologies to enable a wide spectrum of future missions across NASA and other US Government agencies. The ISS EWC uses COTS Wireless Access Points (WAPs) to provide high-rate bi-directional communications to ISS. In this paper, we discuss WEB s packaging, operation, antenna development, and performance testing.

Effect of antigravity suit inflation on cardiovascular, PRA, and PVP responses in humans.

Science.gov (United States)

Kravik, S E; Keil, L C; Geelen, G; Wade, C E; Barnes, P R; Spaul, W A; Elder, C A; Greenleaf, J E

1986-08-01

Blood pressure, pulse rate (PR), serum osmolality and electrolytes, as well as plasma vasopressin (PVP) and plasma renin activity (PRA), were measured in five men and two women [mean age 38.6 +/- 3.9 (SE) yr] before, during, and after inflation of an antigravity suit that covered the legs and abdomen. After 24 h of fluid deprivation the subjects stood quietly for 3 h: the 1st h without inflation, the 2nd with inflation to 60 Torr, and the 3rd without inflation. A similar control noninflation experiment was conducted 10 mo after the inflation experiment using five of the seven subjects except that the suit was not inflated during the 3-h period. Mean arterial pressure increased by 14 +/- 4 (SE) Torr (P less than 0.05) with inflation and decreased by 15 +/- 5 Torr (P less than 0.05) after deflation. Pulse pressure (PP) increased by 7 +/- 2 Torr (P less than 0.05) with inflation and PR decreased by 11 +/- 5 beats/min (P less than 0.05); PP and PR returned to preinflation levels after deflation. Plasma volume decreased by 6.1 +/- 1.5% and 5.3 +/- 1.6% (P less than 0.05) during hours 1 and 3, respectively, and returned to base line during inflation. Inflation decreased PVP from 6.8 +/- 1.1 to 5.6 +/- 1.4 pg/ml (P less than 0.05) and abolished the significant rise in PRA during hour 1. Both PVP and PRA increased significantly after deflation: delta = 18.0 +/- 5.1 pg/ml and 4.34 +/- 1.71 ng angiotensin I X ml-1 X h-1, respectively. Serum osmolality and Na+ and K+ concentrations were unchanged during the 3 h of standing.(ABSTRACT TRUNCATED AT 250 WORDS)

Middle Years Science Teachers Voice Their First Experiences with Interactive Whiteboard Technology

Science.gov (United States)

Gadbois, Shannon A.; Haverstock, Nicole

2012-01-01

Among new technologies, interactive whiteboards (IWBs) particularly seem to engage students and offer entertainment value that may make them highly beneficial for learning. This study examined 10 Grade 6 teachers' initial experiences and uses of IWBs for teaching science. Through interviews, classroom visits, and field notes, the outcomes…

Incorporating full-scale experience into advanced limestone wet FGD designs

International Nuclear Information System (INIS)

Rader, P.C.; Bakke, E.

1992-01-01

Utilities choosing flue gas desulfurization as a strategy for compliance with Phase I of the 1990 Clean Air Act Amendments will largely turn to limestone wet scrubbing as the most cost-effective, least-risk option. State-of-the-art single absorber wet scrubbing systems can be designed to achieve: SO 2 removal efficiencies in excess of 95 %, system availabilities in excess of 98%, and byproducts which can be marketed or land filled. As a result of varying fuel characteristics, site considerations, and owner preferences, FGD plants for large central power stations are typically custom-designed. To avoid the risks associated with new, first-of-a-kind technologies, utilities have preferred to purchase FGD systems from suppliers with proven utility experience and reference plants as close as possible to the design envisioned. As the market for FGD systems is regulatory driven, the demand has shifted geographically in response to national environmental policies. Although limestone wet scrubbing has emerged as the overwhelming choice for SO 2 emission control in coal-fired power stations, the technology has evolved and been adapted to suit local and regional technical and economic situations. Global suppliers are able to benefit from experience and technological advances in the world market. With market units in the U.S., Denmark, Italy, Sweden, and Germany active in the design and supply of wet FGD plants, ABB has a unique ability to incorporate knowledge and experience gained throughout the industrialized world to acid rain retrofit projects in the U.S. This paper describes the design of advanced limestone wet scrubbing systems for application to acid rain retrofits. Specifically, the evolution of advanced design concepts from a global experience base is discussed

The Indian nuclear power programme: Challenges in PHWR technology

International Nuclear Information System (INIS)

Prasad, Y.S.R.

1997-01-01

The long-term strategy for development of nuclear power generation in India is based on a three-stage programme, formulated by Dr. H.J. Bhabha. This strategy takes into account and is optimally suited for achieving self reliance in nuclear technology; India's technological infrastructure; limited resources of Natural Uranium and abundant availability of Thorium within the country

Online public health preparedness training programs: an evaluation of user experience with the technological environment.

Science.gov (United States)

Nambisan, Priya

2010-01-01

Several public health education programs and government agencies across the country have started offering virtual or online training programs in emergency preparedness for people who are likely to be involved in managing or responding to different types of emergency situations such as natural disasters, epidemics, bioterrorism, etc. While such online training programs are more convenient and cost-effective than traditional classroom-based programs, their success depends to a great extent on the underlying technological environment. Specifically, in an online technological environment, different types of user experiences come in to play-users' utilitarian or pragmatic experience, their fun or hedonic experience, their social experience, and most importantly, their usability experience-and these different user experiences critically shape the program outcomes, including course completion rates. This study adopts a multi-disciplinary approach and draws on theories in human computer interaction, distance learning theories, usability research, and online consumer behavior to evaluate users' experience with the technological environment of an online emergency preparedness training program and discusses its implications for the design of effective online training programs. . Data was collected using a questionnaire from 377 subjects who had registered for and participated in online public health preparedness training courses offered by a large public university in the Northeast. Analysis of the data indicates that as predicted, participants had higher levels of pragmatic and usability experiences compared to their hedonic and sociability experiences. Results also indicate that people who experienced higher levels of pragmatic, hedonic, sociability and usability experiences were more likely to complete the course(s) they registered for compared to those who reported lower levels. The study findings hold important implications for the design of effective online emergency

Experiences of model year 2011 Dodge and Jeep owners with collision avoidance and related technologies.

Science.gov (United States)

Cicchino, Jessica B; McCartt, Anne T

2015-01-01

Crash avoidance technologies have the potential to prevent or mitigate many crashes, but their effectiveness depends on drivers' acceptance and proper use. Owners of 2011 Dodge Charger, Dodge Durango, and Jeep Grand Cherokee vehicles were interviewed about their experiences with their vehicles' technologies. Interviews were conducted in April 2013 with 215 owners of Dodge and Jeep vehicles with adaptive cruise control and forward collision warning and 215 owners with blind spot monitoring and rear cross-path detection. Most owners said that they always keep each collision avoidance technology turned on, and more than 90% of owners with each system would want the technology again on their next vehicle. The majority believed that the systems had helped prevent a collision; this ranged from 54% of drivers with forward collision warning to more than three-quarters with blind spot monitoring and rear cross-path detection. Some owners reported behavioral changes with the systems, but over-reliance on them is not prevalent. Reported use of the systems varied by the age and gender of the driver and duration of vehicle ownership to a greater degree than in previous surveys of luxury Volvo and Infiniti vehicles with collision avoidance technologies. Notably, drivers aged 40 and younger were most likely to report that forward collision warning had alerted them multiple times and that it had prevented a collision and that they follow the vehicle ahead less closely with adaptive cruise control. Reports of waiting for the alert from forward collision warning before braking were infrequent but increased with duration of ownership. However, these reports could reflect confusion of the system with adaptive cruise control, which alerts drivers when braking is necessary to maintain a preset speed or following distance but a crash is not imminent. Consistent with previous surveys of luxury vehicle owners with collision avoidance technologies, acceptance and use remains high among

Forward Technology Solar Cell Experiment (FTSCE) for MISSE-5 Verified and Readied for Flight on STS-114

Science.gov (United States)

Jenkins, Phillip P.; Krasowski, Michael J.; Greer, Lawrence C.; Flatico, Joseph M.

2005-01-01

The Forward Technology Solar Cell Experiment (FTSCE) is a space solar cell experiment built as part of the Fifth Materials on the International Space Station Experiment (MISSE-5): Data Acquisition and Control Hardware and Software. It represents a collaborative effort between the NASA Glenn Research Center, the Naval Research Laboratory, and the U.S. Naval Academy. The purpose of this experiment is to place current and future solar cell technologies on orbit where they will be characterized and validated. This is in response to recent on-orbit and ground test results that raised concerns about the in-space survivability of new solar cell technologies and about current ground test methodology. The various components of the FTSCE are assembled into a passive experiment container--a 2- by 2- by 4-in. folding metal container that will be attached by an astronaut to the outer structure of the International Space Station. Data collected by the FTSCE will be relayed to the ground through a transmitter assembled by the U.S. Naval Academy. Data-acquisition electronics and software were designed to be tolerant of the thermal and radiation effects expected on orbit. The experiment has been verified and readied for flight on STS-114.

SAGES: a suite of freely-available software tools for electronic disease surveillance in resource-limited settings.

Directory of Open Access Journals (Sweden)

Sheri L Lewis

Full Text Available Public health surveillance is undergoing a revolution driven by advances in the field of information technology. Many countries have experienced vast improvements in the collection, ingestion, analysis, visualization, and dissemination of public health data. Resource-limited countries have lagged behind due to challenges in information technology infrastructure, public health resources, and the costs of proprietary software. The Suite for Automated Global Electronic bioSurveillance (SAGES is a collection of modular, flexible, freely-available software tools for electronic disease surveillance in resource-limited settings. One or more SAGES tools may be used in concert with existing surveillance applications or the SAGES tools may be used en masse for an end-to-end biosurveillance capability. This flexibility allows for the development of an inexpensive, customized, and sustainable disease surveillance system. The ability to rapidly assess anomalous disease activity may lead to more efficient use of limited resources and better compliance with World Health Organization International Health Regulations.

Adobe Creative Suite 6 Design and Web Premium all-in-one for dummies

CERN Document Server

Smith, Jennifer; Gerantabee, Fred

2012-01-01

The must-have book on the leading suite of software for graphic and web designers Fully revised and updated this hands-on resource offers a one-stop learning opportunity through eight mini-book dedicated to each product inside Adobe's Design & Web Premium Suite. The mini-books include Adobe Creative Suite Basics, InDesign, Illustrator, Photoshop, Acrobat, Dreamweaver, Flash, Fireworks. The book may contain new image enhancements to After Effects, 64-bit versions of Illustrator and Flash Professional, and a new tool, dubbed Helium, that will enable designers to create content using HTML5 and

The technology of extracting gaseous fuel based on comprehensive in situ gasification and coalbed degassing

Directory of Open Access Journals (Sweden)

А. Н. Шабаров

2016-08-01

Full Text Available The study considers a comprehensive technology (designed and patented by the authors of developing coal and methane deposits which combines in situ gasification of lower coalbeds in the suite of rock bump hazardous gassy beds, extraction of coal methane and mechanized mining of coal. The first stage of the technology consists in mining gaseous fuel that enables one to extract up to 15-20 % of total energy from the suite of coalbeds. Geodynamic zoning is used to select positions for boring wells. Using the suggested technology makes it possible to solve a number of tasks simultaneously. First of all that is extracting gaseous fuel from the suite of coalbeds without running any mining works while retaining principal coalbeds in the suite and preparing them for future processing (unloading and degassing. During the first phase the methane-coal deposit works as a gas deposit only, the gas having two sources – extracted methane (which includes its locked forms, absorbed and adsorbed and the products of partial incineration of thin coalbeds, riders and seams from thee suite. The second stage consists in deep degassing and unloading of coal beds which sharply reduces the hazards of methane explosion and rock bumps, thus increasing the productivity of mechanized coal mining. During the second stage coal is mined in long poles with the account of degassing and unloading of coal beds, plus the data on gas dynamic structure of coal rock massif.

Inclusion strategy for mobile technology in the classroom: experience at the Universidad de Tarapacá

OpenAIRE

Bustos Andreu,Hernando; Delgado Almonte,Milagros; Pedraja Rejas,Liliana

2011-01-01

Despite the existence of recognized benefits of the use of information and communication technology in education, the employment of such technology is a complex process that needs appropriate planning and structuring to obtain good results. This article shows the results obtained from the application of a consistent strategy to a set of action plans oriented to the incorporation of a mobile technology platform in the classroom. The results obtained in this experience at the Universidad de Tar...

Adoption and Usage of mHealth Technology on Quality and Experience of Care Provided by Frontline Workers: Observations From Rural India.

Science.gov (United States)

Kaphle, Sangya; Chaturvedi, Sharad; Chaudhuri, Indrajit; Krishnan, Ram; Lesh, Neal

2015-05-28

mHealth apps are deployed with the aim of improving access, quality, and experience of health care. It is possible that any mHealth intervention can yield differential impacts for different types of users. Mediating and determining factors, including personal and socioeconomic factors, affect technology adoption, the way health workers leverage and use the technology, and subsequently the quality and experience of care they provide. To develop a framework to assess whether mHealth platforms affect the quality and experience of care provided by frontline workers, and whether these effects on quality and experience are different depending on the level of technology adoption and individual characteristics of the health worker. Literacy, education, age, and previous mobile experience are identified as individual factors that affect technology adoption and use, as well as factors that affect the quality and experience of care directly and via the technology. Formative research was conducted with 15 community health workers (CHWs) using CommCare, an mHealth app for maternal and newborn care, in Bihar, India. CHWs were first classified on the level of CommCare adoption using data from CommCareHQ and were then shadowed on home visits to evaluate their levels of technology proficiency, and the quality and experience of care provided. Regression techniques were employed to test the relationships. Out of all the CHWs, 2 of them refused to participate in the home visits, however, we did have information on their levels of technology adoption and background characteristics, which were included in the analysis as relevant. Level of technology adoption was important for both quality and experience of care. The quality score for high users of CommCare was higher by 33.4% (P=.04), on average, compared to low users of CommCare. Those who scored higher on CommCare proficiency also provided significantly higher quality and experience of care, where an additional point in Comm

Experimental Evaluation of Energy Efficiency for a Soft Wearable Robotic Suit.

Science.gov (United States)

Jin, Shanhai; Iwamoto, Noriyasu; Hashimoto, Kazunobu; Yamamoto, Motoji

2016-10-12

This paper presents a new soft wearable robotic suit for energy-efficient walking in daily activities for elderly persons. The presented robotic suit provides a small yet effective assistive force for hip flexion through winding belts that include elastic elements. In addition, it does not restrict the range of movement in the lower limbs. Moreover, its structure is simple and lightweight, and thus wearers can easily take the device on and off by themselves. Experimental results on nine elderly subjects (age = 74.23.7 years) show that the robotic suit worn and powered on (PON) significantly reduced energy expenditure by an average of 5.9 % compared with the condition of worn but powered off (POFF). Furthermore, compared with the POFF condition, there was a significant improvement in gait characteristics in the PON condition for all subjects.

Advanced nuclear energy analysis technology

International Nuclear Information System (INIS)

Gauntt, Randall O.; Murata, Kenneth K.; Romero, Vicente Josce; Young, Michael Francis; Rochau, Gary Eugene

2004-01-01

A two-year effort focused on applying ASCI technology developed for the analysis of weapons systems to the state-of-the-art accident analysis of a nuclear reactor system was proposed. The Sandia SIERRA parallel computing platform for ASCI codes includes high-fidelity thermal, fluids, and structural codes whose coupling through SIERRA can be specifically tailored to the particular problem at hand to analyze complex multiphysics problems. Presently, however, the suite lacks several physics modules unique to the analysis of nuclear reactors. The NRC MELCOR code, not presently part of SIERRA, was developed to analyze severe accidents in present-technology reactor systems. We attempted to: (1) evaluate the SIERRA code suite for its current applicability to the analysis of next generation nuclear reactors, and the feasibility of implementing MELCOR models into the SIERRA suite, (2) examine the possibility of augmenting ASCI codes or alternatives by coupling to the MELCOR code, or portions thereof, to address physics particular to nuclear reactor issues, especially those facing next generation reactor designs, and (3) apply the coupled code set to a demonstration problem involving a nuclear reactor system. We were successful in completing the first two in sufficient detail to determine that an extensive demonstration problem was not feasible at this time. In the future, completion of this research would demonstrate the feasibility of performing high fidelity and rapid analyses of safety and design issues needed to support the development of next generation power reactor systems

The impact of video technology on learning: A cooking skills experiment.

Science.gov (United States)

Surgenor, Dawn; Hollywood, Lynsey; Furey, Sinéad; Lavelle, Fiona; McGowan, Laura; Spence, Michelle; Raats, Monique; McCloat, Amanda; Mooney, Elaine; Caraher, Martin; Dean, Moira

2017-07-01

This study examines the role of video technology in the development of cooking skills. The study explored the views of 141 female participants on whether video technology can promote confidence in learning new cooking skills to assist in meal preparation. Prior to each focus group participants took part in a cooking experiment to assess the most effective method of learning for low-skilled cooks across four experimental conditions (recipe card only; recipe card plus video demonstration; recipe card plus video demonstration conducted in segmented stages; and recipe card plus video demonstration whereby participants freely accessed video demonstrations as and when needed). Focus group findings revealed that video technology was perceived to assist learning in the cooking process in the following ways: (1) improved comprehension of the cooking process; (2) real-time reassurance in the cooking process; (3) assisting the acquisition of new cooking skills; and (4) enhancing the enjoyment of the cooking process. These findings display the potential for video technology to promote motivation and confidence as well as enhancing cooking skills among low-skilled individuals wishing to cook from scratch using fresh ingredients. Copyright © 2017 Elsevier Ltd. All rights reserved.

Experiences of using mobile technologies and virtual fieldtrips in Physical Geography: implications for hydrology education

Science.gov (United States)

Kingston, D. G.; Eastwood, W. J.; Jones, P. I.; Johnson, R.; Marshall, S.; Hannah, D. M.

2011-12-01

Education in hydrology is changing rapidly due to diversification of students, emergent major scientific and practical challenges that our discipline must engage with, shifting pedagogic ideas and higher education environments, the need for students to develop new discipline specific and transferrable skills, and the advent of innovative technologies for learning and teaching. This paper focuses on new technologies in the context of learning and teaching in Physical Geography and reflects on the implications of our experiences for education in hydrology. We evaluate the experience of designing and trialling novel mobile technology-based field exercises and a virtual field trip for a Year 1 undergraduate Physical Geography module at a UK university. The new exercises are based on using and obtaining spatial data, operation of meteorological equipment (explained using an interactive DVD), and include introductions to global positioning systems (GPS) and geographical information systems (GIS). The technology and exercises were well received in a pilot study and subsequent rolling-out to the full student cohort (∼150 students). A statistically significant improvement in marks was observed following the redesign. Although the students enjoyed using mobile technology, the increased interactivity and opportunity for peer learning were considered to be the primary benefits by students. This is reinforced further by student preference for the new interactive virtual field trip over the previous "show-and-tell" field exercise. Despite the new exercises having many advantages, exercise development was not trivial due to the high start-up costs, the need for provision of sufficient technical support and the relative difficulty of making year-to-year changes (to the virtual field trip in particular). We believe our experiences are directly relevant to the implementation of such novel learning and teaching technologies in hydrology education.

Asteroid Redirect Crewed Mission Space Suit and EVA System Architecture Trade Study

Science.gov (United States)

Bowie, Jonathan; Buffington, Jesse; Hood, Drew; Kelly, Cody; Naids, Adam; Watson, Richard; Blanco, Raul; Sipila, Stephanie

2014-01-01

The Asteroid Redirect Crewed Mission (ARCM) requires a Launch/Entry/Abort (LEA) suit capability and short duration Extra Vehicular Activity (EVA) capability from the Orion spacecraft. For this mission, the pressure garment selected for both functions is the Modified Advanced Crew Escape Suit (MACES) with EVA enhancements and the life support option that was selected is the Exploration Portable Life Support System (PLSS) currently under development for Advanced Exploration Systems (AES). The proposed architecture meets the ARCM constraints, but much more work is required to determine the details of the suit upgrades, the integration with the PLSS, and the tools and equipment necessary to accomplish the mission. This work has continued over the last year to better define the operations and hardware maturation of these systems. EVA simulations were completed in the Neutral Buoyancy Lab (NBL) and interfacing options were prototyped and analyzed with testing planned for late 2014. This paper discusses the work done over the last year on the MACES enhancements, the use of tools while using the suit, and the integration of the PLSS with the MACES.

Homomorphic encryption experiments on IBM's cloud quantum computing platform

Science.gov (United States)

Huang, He-Liang; Zhao, You-Wei; Li, Tan; Li, Feng-Guang; Du, Yu-Tao; Fu, Xiang-Qun; Zhang, Shuo; Wang, Xiang; Bao, Wan-Su

2017-02-01

Quantum computing has undergone rapid development in recent years. Owing to limitations on scalability, personal quantum computers still seem slightly unrealistic in the near future. The first practical quantum computer for ordinary users is likely to be on the cloud. However, the adoption of cloud computing is possible only if security is ensured. Homomorphic encryption is a cryptographic protocol that allows computation to be performed on encrypted data without decrypting them, so it is well suited to cloud computing. Here, we first applied homomorphic encryption on IBM's cloud quantum computer platform. In our experiments, we successfully implemented a quantum algorithm for linear equations while protecting our privacy. This demonstration opens a feasible path to the next stage of development of cloud quantum information technology.

Putting experience curves in context : links to and between technology development, market diffusion, learning mechanisms and systems innovation theory

NARCIS (Netherlands)

Junginger, M.; Suurs, R.; Verbong, G.P.J.; Schaeffer, G.J.; Sark, W. van; Faaij, A. xx

2010-01-01

As far as the experience curve approach goes, the focus is mainly on quantifying the cost reductions of the technological artefact (e.g. a wind turbine or biomass power plant) due to technological development. However, the experience curve by itself offers no explanation why costs should decline in

Safety Tips: Avoiding Negligence Suits in Chemistry Teaching.

Science.gov (United States)

Gerlovich, Jack A.

1983-01-01

Discusses various aspects related to negligence on the part of chemistry teachers. Areas addressed include negligence in tort law, avoiding negligence suits, proper instructions, proper supervision, equipment maintenance, and other considerations such as sovereign immunity, and contributory versus comparative negligence. (JN)

STS-95 Mission Specialist Duque suits up during TCDT

Science.gov (United States)

1998-01-01

STS-95 Mission Specialist Pedro Duque of Spain, representing the European Space Agency, suits up in the Operations and Checkout Building prior to his trip to Launch Pad 39-B. Duque and the rest of the STS-95 crew are at KSC to participate in the Terminal Countdown Demonstration Test (TCDT) which includes mission familiarization activities, emergency egress training, and a simulated main engine cutoff. The other crew members are Payload Specialist Chiaki Mukai (M.D., Ph.D.), representing the National Space Development Agency of Japan (NASDA), Pilot Steven W. Lindsey, Mission Specialist Scott E. Parazynski, Mission Specialist Stephen K. Robinson, Payload Specialist John H. Glenn Jr., senator from Ohio, and Mission Commander Curtis L. Brown. The STS-95 mission, targeted for liftoff on Oct. 29, includes research payloads such as the Spartan solar-observing deployable spacecraft, the Hubble Space Telescope Orbital Systems Test Platform, the International Extreme Ultraviolet Hitchhiker, as well as the SPACEHAB single module with experiments on space flight and the aging process. Following the TCDT, the crew will be returning to Houston for final flight preparations.

Fuel cell technology for classroom instruction. Basic principles, experiments, work sheets. 2. ed.

Energy Technology Data Exchange (ETDEWEB)

Voigt, Cornelia; Hoeller, Stefan; Kueter, Uwe

2009-07-01

This book provides a clear introduction and overview to fuel cell technology and its associated subject areas. Examples of experiments using solar cells, electrolysis and fuel cells convey the knowledge for forthcoming tests in an understandable manner. The preparation of classroom experiments is made considerably easier for the teacher thanks to the experiment work sheets. These contain the necessary information concerning the material, set-up and execution of the experiment, and questions for evaluation purposes. Online-Shop The training documents and student work sheets combine the basic knowledge, questions and answers, and are ideal for copying. A comprehensive glossary at the end of the book explains all the important technical terms. (orig.)

CMOS pixel development for the ATLAS experiment at HL-LHC

CERN Document Server

Risti{c}, Branislav; The ATLAS collaboration

2017-01-01

To cope with the rate and radiation environment expected at the HL-LHC new approaches are being developed on CMOS pixel detectors, providing charge collection in a depleted layer. They are based on: HV enabling technologies that allow to use high depletion voltages (HV-MAPS), high resistivity wafers for large depletion depths (HR-MAPS); radiation hard processed with multiple nested wells to allow CMOS electronics embedded with sufficient shielding into the sensor substrate and backside processing and thinning for material minimization and backside voltage application. Since 2014, members of more than 20 groups in the ATLAS experiment are actively pursuing CMOS pixel R&D in an ATLAS Demonstrator program pursuing sensor design and characterizations. The goal of this program is to demonstrate that depleted CMOS pixels, with monolithic or hybrid designs, are suited for high rate, fast timing and high radiation operation at LHC. For this a number of technologies have been explored and characterized. In this pr...

CMOS pixel development for the ATLAS experiment at HL-LHC

CERN Document Server

Rimoldi, Marco; The ATLAS collaboration

2017-01-01

To cope with the rate and radiation environment expected at the HL-LHC new approaches are being developed on CMOS pixel detectors, providing charge collection in a depleted layer. They are based on: HV enabling technologies that allow to use high depletion voltages, high resistivity wafers for large depletion depths; radiation hard processed with multiple nested wells to allow CMOS electronics embedded with sufficient shielding into the sensor substrate and backside processing and thinning for material minimization and backside voltage application. Since 2014, members of more than 20 groups in the ATLAS experiment are actively pursuing CMOS pixel R$\\&$D in an ATLAS Demonstrator program pursuing sensor design and characterizations. The goal of this program is to demonstrate that depleted CMOS pixels are suited for high rate, fast timing and high radiation operation at LHC. For this a number of technologies have been explored and characterized. In this presentation the challenges for the usage of CMOS pixel...

CMOS Pixel Development for the ATLAS Experiment at HL-LHC

CERN Document Server

Gaudiello, Andrea; The ATLAS collaboration

2017-01-01

To cope with the rate and radiation environment expected at the HL-LHC new approaches are being developed on CMOS pixel detectors, providing charge collection in a depleted layer. They are based on: HV enabling technologies that allow to use high depletion voltages (HV-MAPS), high resistivity wafers for large depletion depths (HR-MAPS); radiation hard processed with multiple nested wells to allow CMOS electronics embedded with sufficient shielding into the sensor substrate and backside processing and thinning for material minimization and backside voltage application. Since 2014, members of more than 20 groups in the ATLAS experiment are actively pursuing CMOS pixel R&D in an ATLAS Demonstrator program pursuing sensor design and characterizations. The goal of this program is to demonstrate that depleted CMOS pixels, with monolithic or hybrid designs, are suited for high rate, fast timing and high radiation operation at LHC. For this a number of technologies have been explored and characterized. In this pr...

Enhancement of international cooperation and experience exchange: international and regional cooperation in nuclear technology

International Nuclear Information System (INIS)

Henderson, R.R.

1987-01-01

This paper will explore methods that have been effective in accomplishing broad-based technology transfer relationships between international commercial nuclear organizations, and have enhanced the benefits from such relationships through mutual participation in the development of new technology. The factors involved in accomplishing technology transfer will be examined based on the 25 years of Westinghouse experience in establishing successful nuclear technology relationships with over 20 different associates world-wide. This will include information pertaining to organization, training, consultation, technical information transmission, and other important aspects of technology transfer. Additionally, the methodology of enhancing and increasing the benefits of technology transfer through cooperative development programs as produced and promoted by Weatinghouse with its associates will be examined. This will include reviews of several significant copperative programs, such as the programs for the Advanced Pressurized Water Reactor and the Integrated Protection and Control Systems for future plants. (author)

Enhancement of international cooperation and experience exchange - international and regional cooperation in nuclear technology

International Nuclear Information System (INIS)

Henderson, R.R.

1988-01-01

This paper will explore methods that have been effective in accomplishing broad-based technology transfer relationships between international commercial nuclear organizations, and have enhanced the benefits from such relationships through mutual participation in the development of new technology. The factors involved in accomplishing technology transfer will be examined based on the 25 years of Westinghouse experience in establishing successful nuclear technology relationships with over 20 different associates world-wide. This will include information pertaining to organization, training, consultation, technical information transmission, and other important aspects of technology transfer. Additionally, the methodology of enhancing and increasing the benefits of technology transfer through cooperative development programs as produced and promoted by Westinghouse with its associates will be examined. This will include reviews of several significant cooperative programs, such as the programs for the Advanced Pressurized Water Reactor and the Integrated Protection and Control Systems for future plants

Applications of simulation experiments in LMFBR core materials technology

International Nuclear Information System (INIS)

Appleby, W.K.

1976-01-01

The development of charged particle bombardment experiments to simulate neutron irradiation induced swelling in austenitic alloys is briefly described. The applications of these techniques in LMFBR core materials technology are discussed. It is shown that use of the techniques to study the behavior of cold-worked Type-316 was instrumental in demonstrating at an early date the need for advanced materials. The simulation techniques then were used to identify alloying elements which can markedly decrease swelling and thus a focused reactor irradiation program is now in place to allow the future use of a lower swelling alloy for LMFBR core components

Heat Exchanger/Humidifier Trade Study and Conceptual Design for the Constellation Space Suit Portable Life Support System Ventilation Subsystem

Science.gov (United States)

Paul, Heather L.; Sompayrac, Robert; Conger, Bruce; Chamberlain, Mateo

2009-01-01

As development of the Constellation Space Suit Element progresses, designing the most effective and efficient life support systems is critical. The baseline schematic analysis for the Portable Life Support System (PLSS) indicates that the ventilation loop will need some method of heat exchange and humidification prior to entering the helmet. A trade study was initiated to identify the challenges associated with conditioning the spacesuit breathing gas stream for temperature and water vapor control, to survey technological literature and resources on heat exchanger and humidifiers to provide solutions to the problems of conditioning the spacesuit breathing gas stream, and to propose potential candidate technologies to perform the heat exchanger and humidifier functions. This paper summarizes the results of this trade study and also describes the conceptual designs that NASA developed to address these issues.

The IMBA suite: integrated modules for bioassay analysis

Energy Technology Data Exchange (ETDEWEB)

Birchall, A.; Jarvis, N.S.; Peace, M.S.; Riddell, A.E.; Battersby, W.P

1998-07-01

The increasing complexity of models representing the biokinetic behaviour of radionuclides in the body following intake poses problems for people who are required to implement these models. The problem is exacerbated by the current paucity of suitable software. In order to remedy this situation, a collaboration between British Nuclear Fuels, Westlakes Research Institute and the National Radiological Protection Board has started with the aim of producing a suite of modules for estimating intakes and doses from bioassay measurements using the new ICRP models. Each module will have a single purpose (e.g. to calculate respiratory tract deposition) and will interface with other software using data files. The elements to be implemented initially are plutonium, uranium, caesium, iodine and tritium. It is intended to make the software available to other parties under terms yet to be decided. This paper describes the proposed suite of integrated modules for bioassay analysis, IMBA. (author)

Isotopic variation in the Tuolumne Intrusive Suite, central Sierra Nevada, California

Science.gov (United States)

Kistler, R.W.; Chappell, B.W.; Peck, D.L.; Bateman, P.C.

1986-01-01

Granitoid rocks of the compositionally zoned Late Cretaceous Toulumne Intrusive Suite in the central Sierra Nevada, California, have initial87Sr/86Sr values (Sri) and143Nd/144Nd values (Ndi) that vary from 0.7057 to 0.7067 and from 0.51239 to 0.51211 respectively. The observed variation of both Sri and Ndi and of chemical composition in rocks of the suite cannot be due to crystal fractionation of magma solely under closed system conditons. The largest variation in chemistry, Ndi, and Sri is present in the outer-most equigranular units of the Tuolumne Intrusive Suite. Sri varies positively with SiO2, Na2O, K2O, and Rb concentrations, and negatively with Ndi, Al2O3, Fe2O3, MgO, FeO, CaO, MnO, P2O5, TiO2, and Sr concentrations. This covariation of Sri, Ndi and chemistry can be modeled by a process of simple mixing of basaltic and granitic magmas having weight percent SiO2 of 48.0 and 73.3 respectively. Isotopic characteristic of the mafic magma are Sri=0.7047, Ndi=0.51269 and ??18O=6.0, and of the felsic magma are Sri=0.7068, Ndi=0.51212 and ??18O=8.9. The rocks sampled contain from 50 to 80% of the felsic component. An aplite in the outer equigranular unit of the Tuolumne Intrusive Suite apparently was derived by fractional crystallization of plagioclase and hornblende from magma with granudiorite composition that was a product of mixing of the magmas described above. Siliceous magmas derived from the lower crust, having a maximum of 15 percent mantle-derived mafic component, are represented by the inner prophyritic units of the Tuolumne Intrusive Suite. ?? 1986 Springer-Verlag.

Experience with water treatment and restoration technologies during and after uranium mining

International Nuclear Information System (INIS)

Benes, V.; Mitas, J.; Rihak, I.

2002-01-01

DIAMO, state owned enterprise, has a wide experience in uranium mining with the use of classical deep mining, acid in situ leaching and uranium ore processing. The sandstone deposits in Straz block have been exploited since 1968. Geological and hydrogeological conditions of the deposits and the short distance between the deep mine and ISL wellfields requires pumping huge amounts of fresh and/or acid mine water, their treatment and subsequent discharge into streams. DIAMO developed and applied several technologies for different types of wastewater treatment from the start of mining. Practically all of these technologies are used in the current phase of uranium deposit restoration after mining. It is possible to apply these technologies both in the production phase and during the restoration of underground water. In some cases, it is very desirable to combine two or several of them. (author)

Segane saksa-eesti kirjakeel ja eesti lauluraamat / Gustav Suits

Index Scriptorium Estoniae

Suits, Gustav, 1883-1956

1999-01-01

Varem ilmunud: Suits, Gustav. Eesti kirjanduslugu I. Lund : Eesti Kirjanike Kooperatiiv, 1953. Heinrich Stahli käsiraamatu Hand-, Hausz- und Kirchenbuch (1654-1656) osana ilmunud lauluraamatust Neu Ehstnisches Gesangbuch (1656)

Assuring Condition and Inventory Accountability of Chemical Protective Suits

National Research Council Canada - National Science Library

2000-01-01

.... As part of the Defense Logistics Agency's efforts to consolidate depot operations and improve inventory accuracy, chemical protective suits were transferred to the Defense Depot, Albany, Georgia, during FY 1991.

How do Millennial Engineering and Technology Students Experience Learning Through Traditional Teaching Methods Employed in the University Setting?

OpenAIRE

Howard, Elizabeth A

2011-01-01

The purpose of the study was to document and analyze how Millennial engineering and technology students experience learning in large lecture classrooms. To help achieve this purpose, perceptions Millennials have toward traditional teaching methods employed in large lecture classes were analyzed and discussed. Additionally, this study documented how Millennials experienced technology within large lecture classrooms. A learning model depicting how Millennials experience learning within the larg...

High modulus asphalt (EME) technology transfer to South Africa and Australia: shared experiences

CSIR Research Space (South Africa)

Denneman, E

2015-08-01

Full Text Available The paper describes experiences with the implementation of French enrobés à module élevé (EME) (high modulus asphalt) technology in South Africa and Australia. Tentative performance specifications for EME mixes were set in the two countries based...

Space Suit Simulator (S3) for Partial Gravity EVA Experimentation and Training, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Pressurized space suits impose high joint torques on the wearer, reducing mobility for upper and lower body motions. Using actual space suits in training or...

Modular Algorithm Testbed Suite (MATS): A Software Framework for Automatic Target Recognition

Science.gov (United States)

2017-01-01

NAVAL SURFACE WARFARE CENTER PANAMA CITY DIVISION PANAMA CITY, FL 32407-7001 TECHNICAL REPORT NSWC PCD TR-2017-004 MODULAR ...31-01-2017 Technical Modular Algorithm Testbed Suite (MATS): A Software Framework for Automatic Target Recognition DR...flexible platform to facilitate the development and testing of ATR algorithms. To that end, NSWC PCD has created the Modular Algorithm Testbed Suite

Technology Experiences of Student Interns in a One to One Mobile Program

Science.gov (United States)

Cullen, Theresa A.; Karademir, Tugra

2018-01-01

This article describes how a group of student intern teachers (n = 51) in a one to one teacher education iPad program were asked to reflect using Experience Sampling Method (ESM) on their use of technology in the classroom during internship. Interns also completed summative reflections and class discussions. Data collected both in online and…

Leveraging Global Geo-Data and Information Technologies to Bring Authentic Research Experiences to Students in Introductory Geosciences Courses

Science.gov (United States)

Ryan, J. G.

2014-12-01

The 2012 PCAST report identified the improvement of "gateway" science courses as critical to increasing the number of STEM graduates to levels commensurate with national needs. The urgent need to recruit/ retain more STEM graduates is particularly acute in the geosciences, where growth in employment opportunities, an aging workforce and flat graduation rates are leading to substantial unmet demand for geoscience-trained STEM graduates. The need to increase the number of Bachelors-level geoscience graduates was an identified priority at the Summit on the Future of Undergraduate Geoscience Education (http://www.jsg.utexas.edu/events/future-of-geoscience-undergraduateeducation/), as was the necessity of focusing on 2-year colleges, where a growing number of students are being introduced to geosciences. Undergraduate research as an instructional tool can help engage and retain students, but has largely not been part of introductory geoscience courses because of the challenge of scaling such activities for large student numbers. However, burgeoning information technology resources, including publicly available earth and planetary data repositories and freely available, intuitive data visualization platforms makes structured, in-classroom investigations of geoscience questions tractable, and open-ended student inquiry possible. Examples include "MARGINS Mini-Lessons", instructional resources developed with the support of two NSF-DUE grant awards that involve investigations of marine geosciences data resources (overseen by the Integrated Earth Data Applications (IEDA) portal: www.iedadata.org) and data visualization using GeoMapApp (www.geomapapp.org); and the growing suite of Google-Earth based data visualization and exploration activities overseen by the Google Earth in Onsite and Distance Education project (geode.net). Sample-based investigations are also viable in introductory courses, thanks to remote instrument operations technologies that allow real student

Improved airline-type supplied-air plastic suit. [For personnel protection against inhalation of airborne plutonium and tritium

Energy Technology Data Exchange (ETDEWEB)

Jolley, L. Jr.; Zippler, D.B.; Cofer, C.H.; Harper, J.A.

1978-06-01

Two piece supplied-air plastic suits are used extensively at the Savannah River Plant for personnel protection against inhalation of airborne plutonium and tritium. Worker comfort and noise level problems gave impetus to development of an improved suit and aid distribution system. The resulting plastic suit and development work are discussed. The plastic suit unit cost is less than $20, the hearing zone noise level is less than 75 dBA, protection factors exceed 10,000, and user comfort is approved. This suit is expected to meet performance requirements for unrestricted use.

Using Web2.0 social network technology for sampling framework identification and respondent recruitment: experiences with a small-scale experiment

NARCIS (Netherlands)

Grigolon, A.B.; Kemperman, A.D.A.M.; Timmermans, H.J.P.

2011-01-01

In this paper, we report the results of a small–scale experiment to explore the potential of using social network technology for respondent recruitment. Of particular interest are the following questions (i) can social media be used for the identification of sampling frames, (ii) what response rates

Technology Acceptance and User Experience: A Review of the Experiential Component in HCI

DEFF Research Database (Denmark)

Hornbæk, Kasper; Hertzum, Morten

2017-01-01

Understanding the mechanisms that shape the adoption and use of information technology is central to human-computer interaction. Two accounts are particularly vocal about these mechanisms, namely the technology acceptance model (TAM) and work on user experience (UX) models. In this study we review...... 37 papers in the overlap between TAM and UX models to explore the experiential component of human-computer interactions. The models provide rich insights about what constructs influence the experiential component of human-computer interactions and about how these constructs are related. For example...

Experience-based innovations in management of nuclear power plant technology

International Nuclear Information System (INIS)

Wagner, R.L.; Bradbury, R.B.; Freeman, D.V.; Jacobs, S.B.

1987-01-01

During 45 years of nuclear technology development and experience, Stone and Webster (S and W) has developed and successfully applied various innovative techniques to numerous nuclear projects. These techniques, developed primarily in response to the increasing scope and complexity of nuclear power plants, have been used and refined to provide efficient management of the two major nuclear project acticities-design and construction. For this paper, these techniques have been divided into: 1) engineering-based innovations, 2) construction-based innovations, and 3) management-based innovations. (author)

Experience-based innovations in management of nuclear power plant technology

International Nuclear Information System (INIS)

Wagner, R.L.; Bradbury, R.B.; Freeman, D.V.; Jacobs, S.B.

1988-01-01

During 45 years of nuclear technology development and experience, Stone and Webster (S and W) has developed and successfully applied various innovative techniques to numerous nuclear projects. These techniques, developed primarily in response to the increasing scope and complexity of nuclear power plants, have been used and refined to provide efficient management of the two major nuclear project activities - design and construction. For this paper, these techniques have been divided into: (1) engineering-based innovations, (2) construction-based innovations, and (3) management-based innovations

Academic Training: Technological challenges for LHC experiments, the CMS example

CERN Multimedia

Françoise Benz

2005-01-01

2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 28 February, 1, 2, 3 & 4 March from 11.00 to 12.00 hrs - Main Auditorium, bldg. 500 Technological challenges for LHC experiments, the CMS example by P. SPHICAS/CERN-PH, G. DISSERTORI/ETH, Zürich, Ch. M. MANNELLI/CERN-PH, G. HALL/Imperial College, London. GB, P. FABBRICATORE/INFN, Genova, I Monday 28 February Design principles and performances of CMS P. Sphicas/CERN-PH Tuesday 1st March Crystal calorimetry in LHC environment G. Dissertori/ETH Zürich, CH Wednesday 2 March Silicon tracking in LHC environment M. Mannelli/CERN-PH Thursday 3 March Radhard fast electronics for LHC experiments G. Hall/Imperial College London, GB Friday 4 March Design principles of thin high field superconducting solenoids P. Fabbricatore/INFN Genova, I ENSEIGNEMENT ACADEMIQUE ACADEMIC TRAINING Françoise Benz 73127 academic.training@cern.ch

Prokofiev: Romeo and Juliet - Suite N1 / Ivan March

Index Scriptorium Estoniae

March, Ivan

1990-01-01

Uuest heliplaadist "Prokofiev: Romeo and Juliet - Suite N1, Op.64b, N2, Op.64c. Philharmonia Orchestra, Barry Wordsworth" Collins Classics cassette 1116-4. CD. Võrreldud Neeme Järvi plaadistustega 1116-2

The FSM technology -- Operational experience and improvements in local corrosion analysis

International Nuclear Information System (INIS)

Stroemmen, R.; Horn, H.; Gartland, P.O.; Wold, K.

1996-01-01

FSM (Field Signature Method) is a non-intrusive monitoring technique based on a patented principle, developed for the purpose of detection and monitoring of both general and localized corrosion, erosion and cracking in steel and metal structures, piping systems and vessels. Since 1991 FSM has been used for a wide range of applications e.g. for buried and open pipelines, process piping offshore, subsea pipelines and flowlines, applications in the nuclear power industry and in materials research in general. This paper describes typical applications of the FSM technology, and presents operational experience from some of the landbased and subsea installations. The paper also describes recent enhancements in the FSM technology and in the analysis of FSM readings, allowing for monitoring and detailed quantification of pitting and mesa corrosion, and of corrosion in welds