WorldWideScience

Sample records for technology exchange program

  1. Brayton-cycle heat exchanger technology program

    Science.gov (United States)

    Killackey, J. J.; Coombs, M. G.; Graves, R. F.; Morse, C. J.

    1976-01-01

    The following five tasks designed to advance this development of heat exchanger systems for close loop Brayton cycle power systems are presented: (1) heat transfer and pressure drop data for a finned tubular heat transfer matrix. The tubes are arranged in a triangular array with copper stainless steel laminate strips helically wound on the tubes to form a disk fin geometry; (2) the development of a modularized waste heat exchanger. Means to provide verified double containment are described; (3) the design, fabrication, and test of compact plate fin heat exchangers representative of full scale Brayton cycle recuperators; (4) the analysis and design of bellows suitable for operation at 1600 F and 200 psia for 1,000 cycles and 50,000 hours creep life; and (5) screening tests used to select a low cost braze alloy with the desirable attributes of a gold base alloy. A total of 22 different alloys were investigated; the final selection was Nicrobraz 30.

  2. Educators Exchange: A Program Evaluation.

    Science.gov (United States)

    Armstrong, William B.

    The Educators Exchange Program (EEP) was established under a training and educational exchange agreement reached by California's San Diego Community College District (SDCCD) and the republic of Mexico. In the program, the District provided a 4-week technological training program to faculty at Centros de Capacitacion Tecnologica Industrial…

  3. Geology Exchange Program

    Science.gov (United States)

    Because geology professors cannot bring ore deposits from around the globe into their classrooms, the next best thing is to take their students to the deposits, according to David Norman, an associate professor of geochemistry at New Mexico Tech and Angus Moore of the Royal School of Mines. They organized a new exchange program between the New Mexico Institute of Mining and Technology in Socorro, N.M., and the Royal School of Mines in London, England. In May, 14 students from England toured deposits in New Mexico, Arizona, Utah, and Colorado; in the photograph, Norman (on the right) describes a rock from a New Mexico ore deposit to some of the visitors from England. In early June a contingency from New Mexico Tech began studying deposits in England, Spain, and Portugal. Norman and Moore say that the exchange program may be expanded next year.

  4. International Technology Exchange Division: 1993 Annual report

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    The Office of Technology Development (OTD) was established to ensure that reliable and acceptable technologies are available for implementation at DOE sites and that a technically trained work force is available to complete the EM mission by 2019. OTD established the International Technology Exchange Staff (ITES) to identify, evaluate, and acquire international technologies which can accelerate US DOE cleanup operations. ITES`s goal is to pursue international collaboration among government organizations, educational institutions, and private industry to identify world-wide needs and available technologies that will meet US environmental needs in general, and EM cleanup needs in particular; and establish mechanisms by which US government ER/WM technologies will be transferred to the US private sector for commercialization and export to international markets. ITES has developed the following strategic objectives to implement its international goals: develop and implement EM`s policy for international programs in accordance with DOE and US Government policies and regulations; establish efficient and predictable international technology transfer mechanisms; assist the US private sector in the commercialization and deployment of federally funded EM technologies and related knowledge in international markets; leverage US and non-US resources to accelerate international development and regulatory acceptance of EM technologies; contribute to the improvement of EM`s training of US students, scientists, and managers on international environmental issues. A summary and descriptions of program activities and accomplishments are given for 17 programs which comprise the four main areas of the ITES program: Activities with the Former Soviet Union, International Technology Transfer, International Cooperation, and Information Systems and Publications. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  5. NASA/University JOint VEnture (JOVE) Program. VIXEN(tm): Object-Oriented, Technology-Adaptive, Virtual Information Exchange Environment

    Science.gov (United States)

    Anyiwo, Joshua C.

    2000-01-01

    Vixen is a collection of enabling technologies for uninhibited distributed object computing. In the Spring of 1995 when Vixen was proposed, it was an innovative idea very much ahead of its time. But today the technologies proposed in Vixen have become standard technologies for Enterprise Computing. Sun Microsystems J2EE/EJB specifications, among others, are independently proposed technologies of the Vixen type. I have brought Vixen completely under the J2EE standard in order to maximize interoperability and compatibility with other computing industry efforts. Vixen and the Enterprise JavaBean (EJB) Server technologies are now practically identical; OIL, another Vixen technology, and the Java Messaging System (JMS) are practically identical; and so on. There is no longer anything novel or patentable in the Vixen work performed under this grant. The above discussion, notwithstanding, my independent development of Vixen has significantly helped me, my university, my students and the local community. The undergraduate students who worked with me in developing Vixen have enhanced their expertise in what has become the cutting edge technology of their industry and are therefore well positioned for lucrative employment opportunities in the industry. My academic department has gained a new course: "Multi-media System Development", which provides a highly desirable expertise to our students for employment in any enterprise today. The many Outreach Programs that I conducted during this grant period have exposed local Middle School students to the contributions that NASA is making in our society as well as awakened desires in many such students for careers in Science and Technology. I have applied Vixen to the development of two software packages: (a) JAS: Joshua Application Server - which allows a user to configure an EJB Server to serve a J2EE compliant application over the world wide web; (b) PCM: Professor Course Manager: a J2EE compliant application for configuring a

  6. Game Changing Development Program - Next Generation Life Support Project: Oxygen Recovery From Carbon Dioxide Using Ion Exchange Membrane Electrolysis Technology

    Science.gov (United States)

    Burke, Kenneth A.; Jiao, Feng

    2016-01-01

    This report summarizes the Phase I research and development work performed during the March 13, 2015 to July 13, 2016 period. The proposal for this work was submitted in response to NASA Research Announcement NNH14ZOA001N, "Space Technology Research, Development, Demonstration, and Infusion 2014 (SpaceTech-REDDI-2014)," Appendix 14GCD-C2 "Game Changing Development Program, Advanced Oxygen Recovery for Spacecraft Life Support Systems Appendix" The Task Agreement for this Phase I work is Document Control Number: GCDP-02-TA-15015. The objective of the Phase I project was to demonstrate in laboratories two Engineering Development Units (EDU) that perform critical functions of the low temperature carbon dioxide electrolysis and the catalytic conversion of carbon monoxide into carbon and carbon dioxide. The low temperature carbon dioxide electrolysis EDU was built by the University of Delaware with Dr. Feng Jiao as the principal investigator in charge of this EDU development (under NASA Contract NNC15CA04C). The carbon monoxide catalytic conversion EDU was built by the NASA Glenn Research Center with Kenneth Burke as the principal investigator and overall project leader for the development of both EDUs. Both EDUs were successfully developed and demonstrated the critical functions for each process. The carbon dioxide electrolysis EDU was delivered to the NASA Johnson Space Center and the carbon monoxide catalytic conversion EDU was delivered to the NASA Marshall Spaceflight Center.

  7. Technology Commercialization Program 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-11-01

    This reference compilation describes the Technology Commercialization Program of the Department of Energy, Defense Programs. The compilation consists of two sections. Section 1, Plans and Procedures, describes the plans and procedures of the Defense Programs Technology Commercialization Program. The second section, Legislation and Policy, identifies legislation and policy related to the Program. The procedures for implementing statutory and regulatory requirements are evolving with time. This document will be periodically updated to reflect changes and new material.

  8. Are Student Exchange Programs Worth It?

    Science.gov (United States)

    Messer, Dolores; Wolter, Stefan C.

    2007-01-01

    The number of university students participating in exchange programs has risen sharply over the last decade. A survey of Swiss university graduates (classes of 1999 and 2001) shows that participation in student exchange programs depends significantly on the socio-economic background of students. We further analyze whether the participants benefit…

  9. Needle exchange programs in prisons in Spain.

    Science.gov (United States)

    Menoyo, C; Zulaica, D; Parras, F

    2000-01-01

    On 11 July 2000, at the XIII International AIDS Conference in Durban, yet another country--Spain--presented evidence that needle exchange programs in prisons work. We reproduce here the text of the presentation entitled "Needle Exchange Program at the Bilbao Prison, Spain: Two Years of Experience (1997-1999)."

  10. Radiologic Technology Program Standards.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This publication contains statewide standards for the radiologic technology program in Georgia. The standards are divided into 12 categories; Foundations (philosophy, purpose, goals, program objectives, availability, evaluation); Admissions (admission requirements, provisional admission requirements, recruitment, evaluation and planning); Program…

  11. 22 CFR Appendix B to Part 62 - Exchange Visitor Program Services, Exchange-Visitor Program Application

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Exchange Visitor Program Services, Exchange-Visitor Program Application B Appendix B to Part 62 Foreign Relations DEPARTMENT OF STATE PUBLIC DIPLOMACY... information on program. IF TRAINING PROGRAM, identify appropriate fields: 01—Arts & Culture;...

  12. SHARED TECHNOLOGY TRANSFER PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    GRIFFIN, JOHN M. HAUT, RICHARD C.

    2008-03-07

    The program established a collaborative process with domestic industries for the purpose of sharing Navy-developed technology. Private sector businesses were educated so as to increase their awareness of the vast amount of technologies that are available, with an initial focus on technology applications that are related to the Hydrogen, Fuel Cells and Infrastructure Technologies (Hydrogen) Program of the U.S. Department of Energy. Specifically, the project worked to increase industry awareness of the vast technology resources available to them that have been developed with taxpayer funding. NAVSEA-Carderock and the Houston Advanced Research Center teamed with Nicholls State University to catalog NAVSEA-Carderock unclassified technologies, rated the level of readiness of the technologies and established a web based catalog of the technologies. In particular, the catalog contains technology descriptions, including testing summaries and overviews of related presentations.

  13. Staff Exchange or Legal Alien Programs

    DEFF Research Database (Denmark)

    Jørgensen, Rune Nørgaard

    2016-01-01

    SRA would very much like to support the exchange of best practice between members throughout the year and the Membership Committee is presently looking into the opportunities for a Staff Exchange or Legal Alien Program. However the International Section has already had the chance to provide...

  14. 76 FR 33993 - Exchange Visitor Program

    Science.gov (United States)

    2011-06-10

    ... due to this employment and accordingly, such students will be deemed to be in valid J-1 Exchange... Part 62 RIN 1400-ZA20 Exchange Visitor Program AGENCY: Department of State. ACTION: Notice of... Libyan students. This action is necessary to mitigate the adverse impact upon these students due to...

  15. Small engine technology programs

    Science.gov (United States)

    Niedzwiecki, Richard W.

    1990-01-01

    Described here is the small engine technology program being sponsored at the Lewis Research Center. Small gas turbine research is aimed at general aviation, commuter aircraft, rotorcraft, and cruise missile applications. The Rotary Engine program is aimed at supplying fuel flexible, fuel efficient technology to the general aviation industry, but also has applications to other missions. The Automotive Gas Turbine (AGT) and Heavy-Duty Diesel Transport Technology (HDTT) programs are sponsored by DOE. The Compound Cycle Engine program is sponsored by the Army. All of the programs are aimed towards highly efficient engine cycles, very efficient components, and the use of high temperature structural ceramics. This research tends to be generic in nature and has broad applications. The HDTT, rotary technology, and the compound cycle programs are all examining approaches to minimum heat rejection, or 'adiabatic' systems employing advanced materials. The AGT program is also directed towards ceramics application to gas turbine hot section components. Turbomachinery advances in the gas turbine programs will benefit advanced turbochargers and turbocompounders for the intermittent combustion systems, and the fundamental understandings and analytical codes developed in the research and technology programs will be directly applicable to the system projects.

  16. Radiologic Technology Program Guide.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This guide presents the standard curriculum for technical institutes in Georgia. The curriculum addresses the minimum competencies for a radiologic technology program. The guide contains four major sections. The General Information section contains an introduction giving an overview and defining purpose and objectives; a program description,…

  17. Energy Technology Programs: program summaries for 1979

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    The Energy Technology Programs in the BNL Department of Energy and Environment cover a broad range of activities, namely: electrochemical research, chemical energy storage, chemical heat pumps, solar technology, fossil technology, catalytic systems development, space-conditioning technology, and technical support/program management. Summaries of the individual tasks associated with these activities along with publications, significant accomplishments, and program funding levels are presented.

  18. Social Network Analysis of the Farabi Exchange Program: Student Mobility

    Science.gov (United States)

    Ugurlu, Zeynep

    2016-01-01

    Problem Statement: Exchange programs offer communication channels created through student and instructor exchanges; a flow of information takes place through these channels. The Farabi Exchange Program (FEP) is a student and instructor exchange program between institutions of higher education. Through the use of social network analysis and…

  19. WICHE's PSEP: Professional Student Exchange Program

    Science.gov (United States)

    Western Interstate Commission for Higher Education, 2010

    2010-01-01

    The Western Interstate Commission for Higher Education (WICHE) has been providing Western residents with "affordable access to the healthcare professions" for more than 55 years through its Professional Student Exchange Program (PSEP). If an individual enrolls through WICHE's PSEP, he pays reduced tuition at out-of-state public and…

  20. Laser Processed Condensing Heat Exchanger Technology Development

    Science.gov (United States)

    Hansen, Scott; Wright, Sarah; Wallace, Sarah; Hamilton, Tanner; Dennis, Alexander; Zuhlke, Craig; Roth, Nick; Sanders, John

    2017-01-01

    The reliance on non-permanent coatings in Condensing Heat Exchanger (CHX) designs is a significant technical issue to be solved before long-duration spaceflight can occur. Therefore, high reliability CHXs have been identified by the Evolvable Mars Campaign (EMC) as critical technologies needed to move beyond low earth orbit. The Laser Processed Condensing Heat Exchanger project aims to solve these problems through the use of femtosecond laser processed surfaces, which have unique wetting properties and potentially exhibit anti-microbial growth properties. These surfaces were investigated to identify if they would be suitable candidates for a replacement CHX surface. Among the areas researched in this project include microbial growth testing, siloxane flow testing in which laser processed surfaces were exposed to siloxanes in an air stream, and manufacturability.

  1. Pressurized fluidized-bed combustion technology exchange workshop

    Energy Technology Data Exchange (ETDEWEB)

    ,

    1980-04-01

    The pressurized fluidized-bed combustion technology exchange workshop was held June 5 and 6, 1979, at The Meadowlands Hilton Hotel, Secaucus, New Jersey. Eleven papers have been entered individually into EDB and ERA. The papers include reviews of the US DOE and EPRI programs in this area and papers by Swedish, West German, British and American organizations. The British papers concern the joint program of the USA, UK and FRG at Leatherhead. The key factor in several papers is the use of fluidized bed combustors, gas turbines, and steam turbines in combined-cycle power plants. One paper examines several combined-cycle alternatives. (LTN)

  2. Geothermal Technologies Program Overview - Peer Review Program

    Energy Technology Data Exchange (ETDEWEB)

    Milliken, JoAnn [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

    2011-06-06

    This Geothermal Technologies Program presentation was delivered on June 6, 2011 at a Program Peer Review meeting. It contains annual budget, Recovery Act, funding opportunities, upcoming program activities, and more.

  3. Space Technology Research Grants Program

    Data.gov (United States)

    National Aeronautics and Space Administration — The Space Technology Research Grants Program will accelerate the development of "push" technologies to support the future space science and exploration...

  4. Hybrid propulsion technology program

    Science.gov (United States)

    1990-01-01

    Technology was identified which will enable application of hybrid propulsion to manned and unmanned space launch vehicles. Two design concepts are proposed. The first is a hybrid propulsion system using the classical method of regression (classical hybrid) resulting from the flow of oxidizer across a fuel grain surface. The second system uses a self-sustaining gas generator (gas generator hybrid) to produce a fuel rich exhaust that was mixed with oxidizer in a separate combustor. Both systems offer cost and reliability improvement over the existing solid rocket booster and proposed liquid boosters. The designs were evaluated using life cycle cost and reliability. The program consisted of: (1) identification and evaluation of candidate oxidizers and fuels; (2) preliminary evaluation of booster design concepts; (3) preparation of a detailed point design including life cycle costs and reliability analyses; (4) identification of those hybrid specific technologies needing improvement; and (5) preperation of a technology acquisition plan and large scale demonstration plan.

  5. Nuclear Technology Programs

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E. (ed.)

    1990-10-01

    This document reports on the work done by the Nuclear Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period April--September 1988. These programs involve R D in three areas: applied physical chemistry, separation science and technology, and nuclear waste management. The work in applied physical chemistry includes investigations into the processes that control the release and transport of fission products under accident-like conditions, the thermophysical properties of selected materials in environments simulating those of fusion energy systems. In the area of separation science and technology, the bulk of the effort is concerned with developing and implementing processes for the removal and concentration of actinides from waste streams contaminated by transuranic elements. Another effort is concerned with examining the feasibility of substituting low-enriched for high-enriched uranium in the production of fission-product {sup 99}Mo. In the area of waste management, investigations are underway on the performance of materials in projected nuclear repository conditions to provide input to the licensing of the nation's high-level waste repositories.

  6. ABC Technology Development Program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-10-14

    The Accelerator-Based Conversion (ABC) facility will be designed to accomplish the following mission: `Provide a weapon`s grade plutonium disposition capability in a safe, economical, and environmentally sound manner on a prudent schedule for [50] tons of weapon`s grade plutonium to be disposed on in [20] years.` This mission is supported by four major objectives: provide a reliable plutonium disposition capability within the next [15] years; provide a level of safety and of safety assurance that meets or exceeds that afforded to the public by modern commercial nuclear power plants; meet or exceed all applicable federal, state, and local regulations or standards for environmental compliance; manage the program in a cost effective manner. The ABC Technology Development Program defines the technology development activities that are required to accomplish this mission. The technology development tasks are related to the following topics: blanket system; vessel systems; reactivity control systems; heat transport system components; energy conversion systems; shutdown heat transport systems components; auxiliary systems; technology demonstrations - large scale experiments.

  7. 75 FR 23196 - Exchange Visitor Program-Secondary School Students

    Science.gov (United States)

    2010-05-03

    ... Part 62 RIN 1400-AC56 Exchange Visitor Program--Secondary School Students AGENCY: Department of State... exchange program. These regulations govern Department designated exchange visitor programs under which... address the need for greater clarity in current existing regulatory language. The Department's...

  8. Enabling Detailed Energy Analyses via the Technology Performance Exchange: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Studer, D.; Fleming, K.; Lee, E.; Livingood, W.

    2014-08-01

    One of the key tenets to increasing adoption of energy efficiency solutions in the built environment is improving confidence in energy performance. Current industry practices make extensive use of predictive modeling, often via the use of sophisticated hourly or sub-hourly energy simulation programs, to account for site-specific parameters (e.g., climate zone, hours of operation, and space type) and arrive at a performance estimate. While such methods are highly precise, they invariably provide less than ideal accuracy due to a lack of high-quality, foundational energy performance input data. The Technology Performance Exchange was constructed to allow the transparent sharing of foundational, product-specific energy performance data, and leverages significant, external engineering efforts and a modular architecture to efficiently identify and codify the minimum information necessary to accurately predict product energy performance. This strongly-typed database resource represents a novel solution to a difficult and established problem. One of the most exciting benefits is the way in which the Technology Performance Exchange's application programming interface has been leveraged to integrate contributed foundational data into the Building Component Library. Via a series of scripts, data is automatically translated and parsed into the Building Component Library in a format that is immediately usable to the energy modeling community. This paper (1) presents a high-level overview of the project drivers and the structure of the Technology Performance Exchange; (2) offers a detailed examination of how technologies are incorporated and translated into powerful energy modeling code snippets; and (3) examines several benefits of this robust workflow.

  9. Staff exchange with Spokane Intercollegiate Research and Technology Institute (SIRTI), final project report

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, G.M.

    1994-12-01

    Staff exchanges, such as the one described in this report, are intended to facilitate communication and collaboration among scientists and engineers at Department of Energy (DOE) laboratories, in U.S. industry, and academia. Funding support for these exchanges is provided by the DOE, Office of Energy Research, Laboratory Technology Transfer Program. Funding levels for each exchange typically range from $20,000 to $40,000. The exchanges offer the opportunity for the laboratories to transfer technology and expertise to industry, gain a perspective on industry`s problems, and develop the basis for further cooperative efforts through Cooperative Research and Development Agreements (CRADAS) or other mechanisms.

  10. Clean Coal Technology Programs: Program Update 2009

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-10-01

    The purpose of the Clean Coal Technology Programs: Program Update 2009 is to provide an updated status of the U.S. Department of Energy (DOE) commercial-scale demonstrations of clean coal technologies (CCT). These demonstrations have been performed under the Clean Coal Technology Demonstration Program (CCTDP), the Power Plant Improvement Initiative (PPII), and the Clean Coal Power Initiative (CCPI). Program Update 2009 provides: (1) a discussion of the role of clean coal technology demonstrations in improving the nation’s energy security and reliability, while protecting the environment using the nation’s most abundant energy resource—coal; (2) a summary of the funding and costs of the demonstrations; and (3) an overview of the technologies being demonstrated, along with fact sheets for projects that are active, recently completed, or recently discontinued.

  11. Respiratory Therapy Technology Program Standards.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This publication contains statewide standards for the respiratory therapy technology program in Georgia. The standards are divided into 12 categories: Foundations (philosophy, purpose, goals, program objectives, availability, evaluation; Admissions (admission requirements, provisional admission requirements, recruitment, evaluation and planning);…

  12. Avionics Maintenance Technology Program Standards.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This publication contains statewide standards for the avionics maintenance technology program in Georgia. The standards are divided into the following categories: foundations, diploma/degree (philosophy, purpose, goals, program objectives, availability, evaluation); admissions, diploma/degree (admission requirements, provisional admission…

  13. Avionics Maintenance Technology Program Guide.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This program guide presents the avionics maintenance technology curriculum for technical institutes in Georgia. The general information section contains the following for both the diploma program and the associate degree program: purpose and objectives; program description, including admissions, typical job titles, and accreditation and…

  14. Determinants of Participating in Australian University Student Exchange Programs

    Science.gov (United States)

    Daly, Amanda

    2011-01-01

    Outbound mobility programs such as exchange programs are one of the many strategies implemented at universities to develop graduates' intercultural skills and international knowledge. Few Australian students participate in exchange programs. This article presents a literature review and proposes a model of the contextual and individual factors…

  15. Efficient separations and processing crosscutting program 1996 technical exchange meeting. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    This document contains summaries of technology development presented at the 1996 Efficient Separations and Processing Crosscutting Program Technical Exchange Meeting. This meeting is held annually to promote a free exchange of ideas among technology developers, potential users and other interested parties within the EM community. During this meeting the following many separation processes technologies were discussed such as ion exchange, membrane separation, vacuum distillation, selective sorption, and solvent extraction. Other topics discussed include: waste forms; testing or inorganic sorbents for radionuclide and heavy metal removal; selective crystallization; and electrochemical treatment of liquid wastes. This is the leading abstract, individual papers have been indexed separately for the databases.

  16. Syringe exchange programs in Brazil: preliminary assessment of 45 programs

    Directory of Open Access Journals (Sweden)

    Fonseca Elize Massard da

    2006-01-01

    Full Text Available The present study aims to evaluate the current operation of Brazilian syringe exchange programs (SEP. After consulting national and regional networks of people working in projects/ programs aiming to reduce drug-related harm, we identified 134 potential participant programs. Unfortunately, only 45 SEPs answered a survey, even after repeated attempts. The survey addressed: coverage, funding, procurement of basic supplies, managerial capacity, and the local political environment. Findings were triangulated with in-depth interviews with key informants. The main findings included: satisfactory adherence to the initiatives and adequate documentation, but deficiencies in terms of coverage and monitoring, and uneven procurement of resources. Program personnel work mostly on a provisional basis, despite the efforts of local coordinators. Most programs are funded by the National STDs/AIDS Program. A comprehensive agenda aiming to improve current operations should include: concerted efforts to improve local and regional databanks, incentives/sanctions toward full accountability of initiatives carried by the programs, and a genuine culture of monitoring and evaluation.

  17. Syringe exchange programs in Brazil: preliminary assessment of 45 programs

    Directory of Open Access Journals (Sweden)

    Elize Massard da Fonseca

    2006-04-01

    Full Text Available The present study aims to evaluate the current operation of Brazilian syringe exchange programs (SEP. After consulting national and regional networks of people working in projects/ programs aiming to reduce drug-related harm, we identified 134 potential participant programs. Unfortunately, only 45 SEPs answered a survey, even after repeated attempts. The survey addressed: coverage, funding, procurement of basic supplies, managerial capacity, and the local political environment. Findings were triangulated with in-depth interviews with key informants. The main findings included: satisfactory adherence to the initiatives and adequate documentation, but deficiencies in terms of coverage and monitoring, and uneven procurement of resources. Program personnel work mostly on a provisional basis, despite the efforts of local coordinators. Most programs are funded by the National STDs/AIDS Program. A comprehensive agenda aiming to improve current operations should include: concerted efforts to improve local and regional databanks, incentives/sanctions toward full accountability of initiatives carried by the programs, and a genuine culture of monitoring and evaluation.

  18. Ion-exchanged glass waveguide technology: a review

    Science.gov (United States)

    Tervonen, Ari; West, Brian R.; Honkanen, Seppo

    2011-07-01

    We review the history and current status of ion exchanged glass waveguide technology. The background of ion exchange in glass and key developments in the first years of research are briefly described. An overview of fabrication, characterization and modeling of waveguides is given and the most important waveguide devices and their applications are discussed. Ion exchanged waveguide technology has served as an available platform for studies of general waveguide properties, integrated optics structures and devices, as well as applications. It is also a commercial fabrication technology for both passive and active wave-guide components.

  19. 75 FR 32235 - Exchange Visitor Program-Secondary School Students

    Science.gov (United States)

    2010-06-07

    ... school student exchange programs among the general public, the Department will hold this public meeting... in the secondary school student exchange industry (See 74 FR 45385, Sept. 2, 2009). In response to... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF STATE Exchange...

  20. 76 FR 10498 - Exchange Visitor Program-Fees and Charges

    Science.gov (United States)

    2011-02-25

    ... finds that educational and cultural exchanges are both the cornerstone of U.S. public diplomacy and an... Cultural exchange program. Accordingly, 22 CFR part 62 is amended as follows: PART 62--EXCHANGE VISITOR... Obstruct Terrorism Act of 2001 (USA PATRIOT ACT), Pub. L. 107-56, section 416, 115 Stat. 354; and the...

  1. An Experience of the Transfer of Appropriate Technology from Fiji to Kenya; The 1987 ISIS-WICCE Exchange Programme on Women and Appropriate Technology.

    Science.gov (United States)

    Bolabola, Cema

    1987-01-01

    The author describes the 1987 exchange program "Women and Appropriate Technology." The program concentrated on appropriate technology in relation to rural women. She also describes a pilot appropriate technology project carried out in Kenya that involved the construction of three community buildings (a laundry and two bathrooms). (CH)

  2. Statistical Report: Academic Year 2014-15. Student Exchange Program

    Science.gov (United States)

    Western Interstate Commission for Higher Education, 2015

    2015-01-01

    This report covers fall 2014 enrollments for WUE [Western Undergraduate Exchange], WRGP [Western Regional Graduate Program], and PSEP [Professional Student Exchange Program]. It details the funds that flow between students' home states and the enrolling PSEP institutions that receive them. This newly expanded format gives detailed enrollment for…

  3. Implications of WWW technologies for exchanging medical records

    Directory of Open Access Journals (Sweden)

    Maurice Dixon

    1999-09-01

    Full Text Available This article addresses some of the implications for medical record exchange of very recent developments in technology and tools that support the World Wide Web. It argues that XML (Extensible Mark-up Language is a very good enabling technology for medical record exchange. XML provides a much cheaper way of executing the exchange of medical information that circumvents the need for proprietary software. Use of XML can also simplify solutions to the problems associated with coping with the evolution of medical systems in time. However XML on its own does not resolve all the semantic heterogeneities.

  4. Robotics Technology Crosscutting Program. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    The Robotics Technology Development Program (RTDP) is a needs-driven effort. A length series of presentations and discussions at DOE sites considered critical to DOE`s Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the resulting robotics needs assessment revealed several common threads running through the sites: Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination and Dismantlement (D and D). The RTDP Group also realized that some of the technology development in these four areas had common (Cross Cutting-CC) needs, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT and E) process urged an additional organizational breakdown between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). These factors lead to the formation of the fifth application area for Crosscutting and Advanced Technology (CC and AT) development. The RTDP is thus organized around these application areas -- TWR, CAA, MWO, D and D, and CC and AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas.

  5. A software program for exchanging MR data

    DEFF Research Database (Denmark)

    Ring, P B; Jensen, J A; Henriksen, O

    1993-01-01

    of digital MR images of the human brain. Because there was no common data format, software package was developed for data exchange. This article describes the basic features of the developed software. The software package was written in the language of C and was successfully tested on an IBM-6150 UNIX......In an MR multicenter project, data exchange is a problem because most MR scanners do not use the same data format or have data export facilities. In the COMAC-BME Concerted Action on Tissue Characterization by MRS and MRI, a subgroup of seven MR centers had a need for data exchange in the form...

  6. Robotics Technology Development Program. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    The Robotics Technology Development Program (RTDP) is a ``needs-driven`` effort. A lengthy series of presentations and discussions at DOE sites considered critical to DOE`s Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination & Dismantlement (D&D). The RTDP Group realized that much of the technology development was common (Cross Cutting-CC) to each of these robotics application areas, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT&E) process urged an additional organizational break-out between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). The RDTP is thus organized around these application areas -- TWR, CAA, MWO, D&D and CC&AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas.

  7. Robotics crosscutting program: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    The Office of Environmental Management (EM) is responsible for cleaning up the legacy of radioactive and chemically hazardous waste at contaminated sites and facilities throughout the U.S. Department of Energy (DOE) nuclear weapons complex, preventing further environmental contamination, and instituting responsible environmental management. Initial efforts to achieve this mission resulted in the establishment of environmental restoration and waste management programs. However, as EM began to execute its responsibilities, decision makers became aware that the complexity and magnitude of this mission could not be achieved efficiently, affordably, safely, or reasonably with existing technology. Once the need for advanced cleanup technologies became evident, EM established an aggressive, innovative program of applied research and technology development. The Office of Technology Development (OTD) was established in November 1989 to advance new and improved environmental restoration and waste management technologies that would reduce risks to workers, the public, and the environment; reduce cleanup costs; and devise methods to correct cleanup problems that currently have no solutions. In 1996, OTD added two new responsibilities - management of a Congressionally mandated environmental science program and development of risk policy, requirements, and guidance. OTD was renamed the Office of Science and Technology (OST). This documents presents information concerning robotics tank waste retrieval overview, robotic chemical analysis automation, robotics decontamination and dismantlement, and robotics crosscutting and advanced technology.

  8. Virginia Tech, Sweet Briar College formalize student exchange program

    OpenAIRE

    Owczarski, Mark

    2006-01-01

    Virginia Tech and Sweet Briar College have formalized a student exchange program that will broaden the education opportunities of students, provide a diverse campus environment, and facilitate cooperation and collaboration among student and faculty at each institution.

  9. Pollution Prevention Program: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    The Department of Energy (DOE) has established a national Research, Development, Demonstration, Testing, and Evaluation (RDDT&E) Program for pollution prevention and waste minimization at its production plants During FY89/90 the Office of Environmental Restoration and Waste Management (EM), through the Office of Technology Development (OTD), established comprehensive, pollution prevention technical support programs to demonstrate new, environmentally-conscious technology for production processes. The RDDT&E program now entails collaborative efforts across DOE. The Pollution Prevention Program is currently supporting three major activities: The DOE/US Air Force Memorandum of Understanding Program is a collaborative effort to utilize the combined resources of DOE and the Department of Defense, eliminate duplication of effort in developing technologies, and to facilitate technology solutions aimed at reducing waste through process modification, material substitution or recycling. The Waste Component Recycle, Treatment and Disposal Integrated Demonstration (WeDID) will develop recycle, treatment, and disposal processes and associated technologies for use in the dismantlement of non-nuclear weapons components, to support US arms treaties and policies. This program will focus on meeting all security and regulatory requirements (with additional benefit to the commercial electronics industry). The Environmentally Conscious Manufacturing Integrated Demonstration (ECMID) will effectively implement ECM technologies that address both the needs of the DOE Complex and US electronics industry, and encourage strong interaction between DOE and US industry. The ECMID will also develop life cycle analysis tools that will aid decisionmakers in selecting the optimum process based on the tradeoffs between cost an environmental impact.

  10. Government-Industry Data Exchange Program (GIDEP) and NASA Advisories

    Science.gov (United States)

    Sampson, Michael J.

    2010-01-01

    This viewgraph presentation reviews the Government-Industry Data Exchange Program (GIDEP) and NASA Advisories policy to practice. The contents include: 1) Purpose of the Government-Industry Data Exchange Program (GIDEP); 2) NASA and GSFC Documentation; 3) NASA Advisories, differences from GIDEP; 4) GIDEP Distribution by Originator; 5) New Interim GIDEP Policy for Suspect Counterfeits; 6) NASA and Suspect Counterfeits; 7) Threats to GIDEP; and 8) Conclusions and Contact Information.

  11. High Efficiency Engine Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Rich Kruiswyk

    2010-07-13

    Caterpillar's Product Development and Global Technology Division carried out a research program on waste heat recovery with support from DOE (Department of Energy) and the DOE National Energy Technology Laboratory. The objective of the program was to develop a new air management and exhaust energy recovery system that would demonstrate a minimum 10% improvement in thermal efficiency over a base heavy-duty on-highway diesel truck engine. The base engine for this program was a 2007 C15 15.2L series-turbocharged on-highway truck engine with a LPL (low-pressure loop) exhaust recirculation system. The focus of the program was on the development of high efficiency turbomachinery and a high efficiency turbocompound waste heat recovery system. The focus of each area of development was as follows: (1) For turbine stages, the focus was on investigation and development of technologies that would improve on-engine exhaust energy utilization compared to the conventional radial turbines in widespread use today. (2) For compressor stages, the focus was on investigating compressor wheel design parameters beyond the range typically utilized in production, to determine the potential efficiency benefits thereof. (3) For turbocompound, the focus was on the development of a robust bearing system that would provide higher bearing efficiencies compared to systems used in turbocompound power turbines in production. None of the turbocharger technologies investigated involved addition of moving parts, actuators, or exotic materials, thereby increasing the likelihood of a favorable cost-value tradeoff for each technology. And the turbocompound system requires less hardware addition than competing bottoming cycle technologies, making it a more attractive solution from a cost and packaging standpoint. Main outcomes of the program are as follows: (1) Two turbine technologies that demonstrated up to 6% improvement in turbine efficiency on gas stand and 1-3% improvement in thermal efficiency

  12. High Efficiency Engine Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Rich Kruiswyk

    2010-07-13

    Caterpillar's Product Development and Global Technology Division carried out a research program on waste heat recovery with support from DOE (Department of Energy) and the DOE National Energy Technology Laboratory. The objective of the program was to develop a new air management and exhaust energy recovery system that would demonstrate a minimum 10% improvement in thermal efficiency over a base heavy-duty on-highway diesel truck engine. The base engine for this program was a 2007 C15 15.2L series-turbocharged on-highway truck engine with a LPL (low-pressure loop) exhaust recirculation system. The focus of the program was on the development of high efficiency turbomachinery and a high efficiency turbocompound waste heat recovery system. The focus of each area of development was as follows: (1) For turbine stages, the focus was on investigation and development of technologies that would improve on-engine exhaust energy utilization compared to the conventional radial turbines in widespread use today. (2) For compressor stages, the focus was on investigating compressor wheel design parameters beyond the range typically utilized in production, to determine the potential efficiency benefits thereof. (3) For turbocompound, the focus was on the development of a robust bearing system that would provide higher bearing efficiencies compared to systems used in turbocompound power turbines in production. None of the turbocharger technologies investigated involved addition of moving parts, actuators, or exotic materials, thereby increasing the likelihood of a favorable cost-value tradeoff for each technology. And the turbocompound system requires less hardware addition than competing bottoming cycle technologies, making it a more attractive solution from a cost and packaging standpoint. Main outcomes of the program are as follows: (1) Two turbine technologies that demonstrated up to 6% improvement in turbine efficiency on gas stand and 1-3% improvement in thermal efficiency

  13. Respiratory Therapy Technology Program Guide.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This guide presents the standard curriculum for technical institutes in Georgia. The curriculum addresses the minimum competencies for a respiratory therapy technology program. The guide contains four sections. The General Information section contains an introduction giving an overview and defining the purpose and objectives, a program…

  14. A Chemical Technology Program Partnership

    Science.gov (United States)

    Hicks, Gary

    1998-01-01

    Brazosport College would be the first to admit that they owe the success of their Chemical Technology Program to the partnership that was developed between the college and the surrounding chemical industry. The college is a two-year institution located near the Texas Gulf Coast with more than twelve chemical companies in the immediate area. Dow Chemical is the largest, employing more than 5,000. Currently, the Science Department at Brazosport College offers associate of science degrees in biology, chemistry, and physics, and associate of applied science degrees in chemical technology and instrumentation technology to meet the needs of these industries. In addition, many students enroll in classes to prepare for specific occupations or to build their skills for employment. This may only require the student to take a few courses. The current Chemical Technology Program addresses skills needed for both laboratory and process technician jobs in the chemical industry. An Associate of Applied Science Degree in Chemical Technology is offered with either a laboratory or a process option. These programs were developed with input from the chemical industry, and the college trains all new process employees for BASF and Dow. Additionally, the college does customized flexible-entry training in process operations and laboratory analysis for these and several other companies.

  15. Student Exchange Programs Statistical Report, Academic Year 2007-08

    Science.gov (United States)

    Western Interstate Commission for Higher Education, 2008

    2008-01-01

    Through the three student exchange programs administered by the Western Interstate Commission for Higher Education (WICHE), approximately 23,300 residents of 15 Western states are enrolled at reduced levels of tuition across a spectrum of undergraduate, graduate, and professional programs. This annual report covers Fall 2007 enrollments in the…

  16. Exchange Rate Uncertainty in Money-Based Stabilization Programs

    OpenAIRE

    R. Armando Morales

    1998-01-01

    Complementing the explanation provided by Calvo and Vegh (1994) for money-based stabilization programs, exchange rate uncertainty introduced to a particular version of the portfolio approach with imperfect competition in the banking system leads to a bias toward appreciation that is directly related to the divergence of expectations and that dampens the interaction between portfolio movements and the real exchange rate. Based on Frankel-Froot, uncertainty exists when the fundamental equilibri...

  17. Space Propulsion Technology Program Overview

    Science.gov (United States)

    Escher, William J. D.

    1991-01-01

    The topics presented are covered in viewgraph form. Focused program elements are: (1) transportation systems, which include earth-to-orbit propulsion, commercial vehicle propulsion, auxiliary propulsion, advanced cryogenic engines, cryogenic fluid systems, nuclear thermal propulsion, and nuclear electric propulsion; (2) space platforms, which include spacecraft on-board propulsion, and station keeping propulsion; and (3) technology flight experiments, which include cryogenic orbital N2 experiment (CONE), SEPS flight experiment, and cryogenic orbital H2 experiment (COHE).

  18. Educators Exchange Program Report, 1998-99. Program Report and Evaluation Study.

    Science.gov (United States)

    Fawson, Kenneth D.; Abina, Armando; Alvarez, Rafael; Armstrong, William B.; Buyukkaya, Sonia; Kardos, Althea; Schubert, Cynthia

    In 1998, the San Diego Community College District (SDCCD) completed a successful third cycle of Educators Exchange Program (EEP) activities. The goal of EEP is to promote binational cooperation, cultural understanding and economic development through faculty exchange and technical assistance programs. During the last six years of program…

  19. Strengthening 4-H Program Communication through Technology

    Science.gov (United States)

    Robideau, Kari; Santl, Karyn

    2011-01-01

    Advances in technology are transforming how youth and parents interact with programs. The Strengthening 4-H Communication through Technology project was implemented in eight county 4-H programs in Northwest Minnesota. This article outlines the intentional process used to effectively implement technology in program planning. The project includes:…

  20. 75 FR 1591 - Green Technology Pilot Program

    Science.gov (United States)

    2010-01-12

    ... Patent and Trademark Office Green Technology Pilot Program ACTION: Proposed collection; comment request...@uspto.gov . Include A0651-0062 Green Technology Pilot Program comment@ in the subject line of the... examination pilot program for patent applications pertaining to green technologies, including greenhouse...

  1. A Simple Tubesheet Layout Program for Heat Exchangers

    Directory of Open Access Journals (Sweden)

    S. Murali

    2008-01-01

    Full Text Available The development of tubesheet layout program for shell and tube heat exchangers is presented in this study. Program is written in AutoLISP language, which provides standard tubesheet layout drawing as per standard codes and non standard tubsheet in AutoCAD Environment. The program computes the optimal number of tube count and lays out drawing with respecting constraints, including the shell ID, number of passes, center to center distance of tubes and tube outer diameter. Tubesheet layout drawing can be used as template for actual tubesheet. Furthermore the program is validated with open literature and shown good agreement with it. Besides the tubesheet for Heat exchangers this method can be extended to the tube counts of sheave plates and perforated plates of distillation column and Cooling Towers.

  2. Program exchanges green backs for green cards

    Energy Technology Data Exchange (ETDEWEB)

    Madison, Alison L.

    2010-07-02

    As they say, membership has its privileges. Starbucks Gold members get coffee discounts. Costco members get to spend at least $100 per trip no matter what they went for. And loyalists of certain local businesses get first dibs on boat race tickets that actually involve shade. Here’s a new one for you. Members of the EB-5 Visa Program get legal residency--and eventually citizenship--in the U.S. When I first heard about it, I poignantly thought to myself, "Say what?" But I am now enlightened, and admittedly a tad enthusiastic, thanks to a couple of presenters at a recent Tri-Cities Research District Speaker Series event.

  3. Student Exchange Programs: Statistical Report. Academic Year, 2009-10

    Science.gov (United States)

    Western Interstate Commission for Higher Education, 2010

    2010-01-01

    Over 55 years ago, the Western states formed the Western Regional Education Compact and agreed to share higher education resources in the West through the Western Interstate Commission for Higher Education (WICHE). Through WICHE's three student exchange programs, nearly 26,000 residents of 15 Western states are enrolled at reduced levels of…

  4. Professional Student Exchange Program (PSEP) Administrative Manual. Revised

    Science.gov (United States)

    Western Interstate Commission for Higher Education, 2012

    2012-01-01

    WICHE (the Western Interstate Commission for Higher Education) is a regional, nonprofit organization. WICHE and its 15 member states work to improve access to higher education and ensure student success. Its student exchange programs, regional initiatives, and its research and policy work allow it to assist constituents throughout the West and…

  5. Clean Coal Technology Demonstration Program: Program Update 1998

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    1999-03-01

    Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  6. Clean Coal Technology Demonstration Program: Program Update 2000

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2001-04-01

    Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  7. Clean Coal Technology Demonstration Program: Program Update 2001

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2002-07-30

    Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results. Also includes Power Plant Improvement Initiative Projects.

  8. Proceedings of the Efficient Separations and Processing Cross-Cutting Program Annual Technical Exchange Meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-01

    This document contains summaries of technology development presented at the 1995 Efficient Separations and Processing Cross-Cutting Program (ESP) Annual Technical Exchange Meeting. The ESP is sponsored by the US Department of Energy`s Office of Environmental Management (EM), Office of Technology Development. The meeting is held annually to promote a free exchange of ideas among technology developers, potential users (for example, EM focus areas), and other interested parties within EM. During this meeting, developers of ESP-funded technologies describe the problems and needs addressed by their technologies; the technical approach, accomplishments, and resolution of issues; the strategy and schedule for commercialization; and evolving potential applications. Presenters are asked to address the following areas: Target waste management problem, waste stream, or data need; scientific background and technical approach; technical accomplishments and resolution of technical issues; schedule and strategy for commercializing and implementing the technology or acquiring needed data; potential alternate applications of the technology or data, including outside of DOE/EM. The meeting is not a program review of the individual tasks or subtasks; but instead focuses on the technical aspects and implementation of ESP-sponsored technology or data. The meeting is also attended by members of the ESP Technical Review Team, who have the opportunity at that time to review the ESP as a whole.

  9. ORGANIZATIONAL, LEGAL AND TECHNOLOGICAL ASPECTS OF HEALTH INFORMATION EXCHANGE

    Directory of Open Access Journals (Sweden)

    N. A. Karasev

    2017-01-01

    Full Text Available The article discusses organizational and legal aspects of electronic health information exchange in developed countries, particularly, introduction of electronic medical records in the United States and Europe, as well as topical issues related to standardization of information technologies in health care. We briefly describe the most popular standards used in e-medicine, such as Digital Imaging and Communications in Medicine (DICOM, openEHR and HL7. The questions of syntactic and semantic interoperability in the exchange of electronic medical records and some aspects of the digital signature use are also considered. We suggest mechanisms for implementation of electronic document management and sharing of digital medical information, as one of the most important directions of information technologies in health care. It is noted that today, the main limiting factor in providing the digital exchange of health information in Russian Federation is unresolved legal issues, i.e. the absence of a legal framework of electronic medical records share. At the same time, the level of IT development in our country is quite sufficient to meet current challenges. It is stated that, despite the unresolved number of problems (for example, completeness of medical data on a patient, given to relatives in critical situations, the adoption of a single electronic card is able to bring medical care to a new level, especially in emergency and urgent medicine.

  10. Building Technologies Program Multi-Year Program Plan Technology Validation and Market Introduction 2008

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-01-01

    Building Technologies Program Multi-Year Program Plan 2008 for technology validation and market introduction, including ENERGY STAR, building energy codes, technology transfer application centers, commercial lighting initiative, EnergySmart Schools, EnergySmar

  11. Information technology - Telecommunications and information exchange between systems - Private integrated services network - Inter-exchange signalling protocol - Message waiting indication supplementary service

    CERN Document Server

    International Organization for Standardization. Geneva

    2003-01-01

    Information technology - Telecommunications and information exchange between systems - Private integrated services network - Inter-exchange signalling protocol - Message waiting indication supplementary service

  12. Information technology - Telecommunications and information exchange between systems - Private integrated services network - Inter-exchange signalling protocol - Call priority interruption and call priority interruption protection supplementary services

    CERN Document Server

    International Organization for Standardization. Geneva

    2003-01-01

    Information technology - Telecommunications and information exchange between systems - Private integrated services network - Inter-exchange signalling protocol - Call priority interruption and call priority interruption protection supplementary services

  13. Information technology - Telecommunications and information exchange between systems - Private integrated services network - Inter-exchange signalling protocol - Wireless terminal authentication supplementary services

    CERN Document Server

    International Organization for Standardization. Geneva

    2003-01-01

    Information technology - Telecommunications and information exchange between systems - Private integrated services network - Inter-exchange signalling protocol - Wireless terminal authentication supplementary services

  14. Information technology - Telecommunications and information exchange between systems - Private integrated services network - Inter-exchange signalling protocol - Path replacement additional network feature

    CERN Document Server

    International Organization for Standardization. Geneva

    2003-01-01

    Information technology - Telecommunications and information exchange between systems - Private integrated services network - Inter-exchange signalling protocol - Path replacement additional network feature

  15. Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Inter-exchange signalling protocol - Call interception additional network feature

    CERN Document Server

    International Organization for Standardization. Geneva

    2003-01-01

    Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Inter-exchange signalling protocol - Call interception additional network feature

  16. Information technology - Telecommunications and information exchange between systems - Private integrated services network - Inter-exchange signalling protocol - Name identification supplementary services

    CERN Document Server

    International Organization for Standardization. Geneva

    2003-01-01

    Information technology - Telecommunications and information exchange between systems - Private integrated services network - Inter-exchange signalling protocol - Name identification supplementary services

  17. Information technology - Telecommunications and information exchange between systems - Private integrated services network - Inter-exchange signalling protocol - Single step call transfer supplementary service

    CERN Document Server

    International Organization for Standardization. Geneva

    2003-01-01

    Information technology - Telecommunications and information exchange between systems - Private integrated services network - Inter-exchange signalling protocol - Single step call transfer supplementary service

  18. ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM: GREEN BUILDING TECHNOLOGIES

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This techno...

  19. Student Technology Competencies for School Counseling Programs.

    Science.gov (United States)

    Hines, Peggy LaTurno

    2002-01-01

    This article briefly reviews the growth of technology and the development of standards related to technology in counseling, Pre-K-12 education, educator preparation programs, and the field of school counseling. The development of pre-admission and program outcome technology skills at Indiana State University is discussed along with the specific…

  20. 75 FR 64692 - Green Technology Pilot Program

    Science.gov (United States)

    2010-10-20

    ... Patent and Trademark Office Green Technology Pilot Program ACTION: Proposed collection; comment request...: ] E-mail: InformationCollection@uspto.gov . Include ``0651- 0062 Green Technology Pilot Program... Office (USPTO) implemented a pilot program on December 8, 2009, that permits patent...

  1. Investigation of Condensing Ice Heat Exchangers for MTSA Technology Development

    Science.gov (United States)

    Padilla, Sebastian; Powers, Aaron; Ball, Tyler; Lacomini, Christie; Paul, Heather L.

    2009-01-01

    Metabolic heat regenerated Temperature Swing Adsorption (MTSA) technology is being developed for thermal, carbon dioxide (CO2) and humidity control for a Portable Life Support Subsystem (PLSS). Metabolically-produced CO2 present in the ventilation gas of a PLSS is collected using a CO2-selective adsorbent via temperature swing adsorption. The temperature swing is initiated through cooling to well below metabolic temperatures. Cooling is achieved with a sublimation heat exchanger using water or liquid carbon dioxide (L CO2) expanded below sublimation temperature when exposed to low pressure or vacuum. Subsequent super heated vapor, as well as additional coolant, is used to further cool the astronaut. The temperature swing on the adsorbent is then completed by warming the adsorbent with a separate condensing ice heat exchanger (CIHX) using metabolic heat from moist ventilation gas. The condensed humidity in the ventilation gas is recycled at the habitat. The water condensation from the ventilation gas represents a significant source of potential energy for the warming of the adsorbent bed as it represents as much as half of the energy potential in the moist ventilation gas. Designing a heat exchanger to efficiently transfer this energy to the adsorbent bed and allow the collection of the water is a challenge since the CIHX will operate in a temperature range from 210K to 280K. The ventilation gas moisture will first freeze and then thaw, sometimes existing in three phases simultaneously.

  2. Clean Coal Technology Programs: Program Update 2003 (Volume 1)

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2003-12-01

    Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  3. Liquid Salt Heat Exchanger Technology for VHTR Based Applications

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Mark; Sridhara, Kumar; Allen, Todd; Peterson, Per

    2012-10-11

    The objective of this research is to evaluate performance of liquid salt fluids for use as a heat carrier for transferring high-temperature process heat from the very high-temperature reactor (VHTR) to chemical process plants. Currently, helium is being considered as the heat transfer fluid; however, the tube size requirements and the power associated with pumping helium may not be economical. Recent work on liquid salts has shown tremendous potential to transport high-temperature heat efficiently at low pressures over long distances. This project has two broad objectives: To investigate the compatibility of Incoloy 617 and coated and uncoated SiC ceramic composite with MgCl2-KCl molten salt to determine component lifetimes and aid in the design of heat exchangers and piping; and, To conduct the necessary research on the development of metallic and ceramic heat exchangers, which are needed for both the helium-to-salt side and salt-to-process side, with the goal of making these heat exchangers technologically viable. The research will consist of three separate tasks. The first task deals with material compatibility issues with liquid salt and the development of techniques for on-line measurement of corrosion products, which can be used to measure material loss in heat exchangers. Researchers will examine static corrosion of candidate materials in specific high-temperature heat transfer salt systems and develop an in situ electrochemical probe to measure metallic species concentrations dissolved in the liquid salt. The second task deals with the design of both the intermediate and process side heat exchanger systems. Researchers will optimize heat exchanger design and study issues related to corrosion, fabrication, and thermal stresses using commercial and in-house codes. The third task focuses integral testing of flowing liquid salts in a heat transfer/materials loop to determine potential issues of using the salts and to capture realistic behavior of the salts in a

  4. 75 FR 22553 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2010-04-29

    ... National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY.... SUMMARY: The Technology Innovation Program Advisory Board, National Institute of Standards and Technology... Technology Innovation Program (TIP) Advisory Board is composed of ten members appointed by the Director...

  5. Controlling mercury spills in laboratories with a thermometer exchange program

    Energy Technology Data Exchange (ETDEWEB)

    McLouth, Lawrence D.

    2002-03-25

    This paper presents a case for replacing mercury thermometers with their organic-liquid-filled counterparts. A review of liquid-in glass-thermometers is given. In addition, a brief summary of mercury's health effects and exposure limits is presented. Spill cleanup methods and some lessons learned from our experience are offered as well. Finally, an overview of the mercury thermometer exchange program developed at Lawrence Berkeley National Laboratory is presented.

  6. Division of Environmental Control Technology program, 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-06-01

    Environmental engineering programs are reviewed for the following technologies; coal; petroleum and gas; oil shale; solar; geothermal and energy conservation; nuclear energy; and decontamination and decommissioning. Separate abstracts were prepared for each technology. (MHR)

  7. ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM: FUEL CELLS

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This techno...

  8. ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM CASE STUDIES: DEMONSTRATING PROGRAM OUTCOMES

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This bookle...

  9. How Programming Fits with Technology Education Curriculum

    Science.gov (United States)

    Wright, Geoffrey A.; Rich, Peter; Leatham, Keith R.

    2012-01-01

    Programming is a fundamental component of modern society. Programming and its applications influence much of how people work and interact. Because of people's reliance on programming in one or many of its applications, there is a need to teach students to be programming literate. Because the purpose of the International Technology and Engineering…

  10. How Programming Fits with Technology Education Curriculum

    Science.gov (United States)

    Wright, Geoffrey A.; Rich, Peter; Leatham, Keith R.

    2012-01-01

    Programming is a fundamental component of modern society. Programming and its applications influence much of how people work and interact. Because of people's reliance on programming in one or many of its applications, there is a need to teach students to be programming literate. Because the purpose of the International Technology and Engineering…

  11. 78 FR 79619 - Patient Protection and Affordable Care Act; Program Integrity: Exchange, Premium Stabilization...

    Science.gov (United States)

    2013-12-31

    ...-9957-CN; 9964-CN] RIN 0938-AR82; RIN 0938-AR74 Patient Protection and Affordable Care Act; Program... Affordable Care Act; Program Integrity: Exchange, Premium Stabilization Programs, and Market Standards... and Affordable Care Act; Program Integrity: Exchange, Premium Stabilization Programs, and...

  12. INTERNATIONAL ENVIRONMENTAL TECHNOLOGY IDENTIFICATION, DEVELOPMENT, DEMONSTRATION, DEPLOYMENT AND EXCHANGE

    Energy Technology Data Exchange (ETDEWEB)

    Roy C. Herndon

    2001-02-28

    Cooperative Agreement (DE-FC21-95EW55101) between the U.S. Department of Energy (DOE) and the Florida State University's Institute for International Cooperative Environmental Research (IICER) was designed to facilitate a number of joint programmatic goals of both the DOE and the IICER related to international technology identification, development, demonstration and deployment using a variety of mechanisms to accomplish these goals. These mechanisms included: laboratory and field research; technology demonstrations; international training and technical exchanges; data collection, synthesis and evaluation; the conduct of conferences, symposia and high-level meetings; and other appropriate and effective approaches. The DOE utilized the expertise and facilities of the IICER at Florida State University to accomplish its goals related to this cooperative agreement. The IICER has unique and demonstrated capabilities that have been utilized to conduct the tasks for this cooperative agreement. The IICER conducted activities related to technology identification, development, evaluation, demonstration and deployment through its joint centers which link the capabilities at Florida State University with collaborating academic and leading research institutions in the major countries of Central and Eastern Europe (e.g., Czech Republic, Hungary, Poland) and Russia. The activities and accomplishments for this five-year cooperative agreement are summarized in this Final Technical Report.

  13. Building Technologies Program Multi-Year Program Plan Program Portfolio Management 2008

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-01-01

    Building Technologies Program Multi-Year Program Plan 2008 for program portfolio management, including the program portfolio management process, program analysis, performance assessment, stakeholder interactions, and cross-cutting issues.

  14. Innovative Technology Development Program. Final summary report

    Energy Technology Data Exchange (ETDEWEB)

    Beller, J.

    1995-08-01

    Through the Office of Technology Development (OTD), the U.S. Department of Energy (DOE) has initiated a national applied research, development, demonstration, testing, and evaluation program, whose goal has been to resolve the major technical issues and rapidly advance technologies for environmental restoration and waste management. The Innovative Technology Development (ITD) Program was established as a part of the DOE, Research, Development, Demonstration, Testing, and Evaluation (RDDT&E) Program. The plan is part of the DOE`s program to restore sites impacted by weapons production and to upgrade future waste management operations. On July 10, 1990, DOE issued a Program Research and Development Announcement (PRDA) through the Idaho Operations Office to solicit private sector help in developing innovative technologies to support DOE`s clean-up goals. This report presents summaries of each of the seven projects, which developed and tested the technologies proposed by the seven private contractors selected through the PRDA process.

  15. Proton exchange membrane fuel cell technology for transportation applications

    Energy Technology Data Exchange (ETDEWEB)

    Swathirajan, S. [General Motors R& D Center, Warren, MI (United States)

    1996-04-01

    Proton Exchange Membrane (PEM) fuel cells are extremely promising as future power plants in the transportation sector to achieve an increase in energy efficiency and eliminate environmental pollution due to vehicles. GM is currently involved in a multiphase program with the US Department of Energy for developing a proof-of-concept hybrid vehicle based on a PEM fuel cell power plant and a methanol fuel processor. Other participants in the program are Los Alamos National Labs, Dow Chemical Co., Ballard Power Systems and DuPont Co., In the just completed phase 1 of the program, a 10 kW PEM fuel cell power plant was built and tested to demonstrate the feasibility of integrating a methanol fuel processor with a PEM fuel cell stack. However, the fuel cell power plant must overcome stiff technical and economic challenges before it can be commercialized for light duty vehicle applications. Progress achieved in phase I on the use of monolithic catalyst reactors in the fuel processor, managing CO impurity in the fuel cell stack, low-cost electrode-membrane assembles, and on the integration of the fuel processor with a Ballard PEM fuel cell stack will be presented.

  16. CICT Computing, Information, and Communications Technology Program

    Science.gov (United States)

    Laufenberg, Lawrence; Tu, Eugene (Technical Monitor)

    2002-01-01

    The CICT Program is part of the NASA Aerospace Technology Enterprise's fundamental technology thrust to develop tools. processes, and technologies that enable new aerospace system capabilities and missions. The CICT Program's four key objectives are: Provide seamless access to NASA resources- including ground-, air-, and space-based distributed information technology resources-so that NASA scientists and engineers can more easily control missions, make new scientific discoveries, and design the next-generation space vehicles, provide high-data delivery from these assets directly to users for missions, develop goal-oriented human-centered systems, and research, develop and evaluate revolutionary technology.

  17. Environmental technologies program, Fiscal year 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    This document presents details of the technology that is currently being demonstrated at the Hanford Site. The program is testing technology for cost and time savings in the following clean-up areas: detection and characterization; soil and ground water remediation; remote handling; waste minimization; and high-level, low-level, and mixed waste treatment. This document also contains a technology integration section.

  18. 76 FR 70970 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2011-11-16

    ... National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY.... SUMMARY: The Technology Innovation Program (TIP) Advisory Board will hold a meeting via teleconference on... Innovation Program Acting Deputy Director, National Institute of Standards and Technology, 100 Bureau...

  19. 76 FR 22673 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2011-04-22

    ... National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY... notice in the Federal Register announcing an open meeting for the Technology Innovation Program Advisory... rene.cesaro@nist.gov . SUPPLEMENTARY INFORMATION: The Technology Innovation Program (TIP)...

  20. Clean Coal Technology Demonstration Program: Program update 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    The Clean Coal Technology Demonstration Program (also referred to as the CCT Program) is a $6.9 billion cost-shared industry/government technology development effort. The program is to demonstrate a new generation of advanced coal-based technologies, with the most promising technologies being moved into the domestic and international marketplace. Technology has a vital role in ensuring that coal can continue to serve U.S. energy interests and enhance opportunities for economic growth and employment while meeting the national committment to a clean and healthy global environment. These technologies are being advanced through the CCT Program. The CCT Program supports three substantive national objectives: ensuring a sustainable environment through technology; enhancing energy efficiency and reliability; providing opportunities for economic growth and employment. The technologies being demonstrated under the CCT Program reduce the emissions of sulfur oxides, nitrogen oxides, greenhouse gases, hazardous air pollutants, solid and liquid wastes, and other emissions resulting from coal use or conversion to other fuel forms. These emissions reductions are achieved with efficiencies greater than or equal to currently available technologies.

  1. Knowledge Exchange Within the Rapid Climate Change Program (RAPID)

    Science.gov (United States)

    Wallace, C.; Srokosz, M.

    2008-12-01

    The Rapid Climate Change Program (RAPID) is a major UK-led science program investigating the susceptibility to and risk of abrupt change in the climate system, with a particular focus on the role of the Atlantic Meridional Overturning Circulation (AMOC). RAPID commenced in 2001, with initial funding to 2008 and has just entered its second phase - RAPID-WATCH - extending some aspects of the program until 2014. Scientifically, a key focus of the program has concerned the development and deployment of a continuous AMOC observing system, although the program has also supported research into a number of other aspects of rapid climate change, including paleo studies of past rapid changes, modeling of the past and future climate, and the development of methods with which to aid the quantification of future risks. Given the societal implications that abrupt climate change associated with the AMOC may have for the North Atlantic region, a major focus within the program has been the implementation of a Knowledge Exchange strategy with which to engage key decision and policy makers within the UK political and industrial sectors. This interaction is especially pertinent for those decision makers involved in the development of adaptive capacities that must incorporate resilience to so-called high-impact, low-probability class threats. We will summarize here the main aspects of our approach, outlining activities/methods used both to satisfy the obvious need to transfer key scientific findings from the program to users, but also in facilitating a return flow of knowledge which can be used by scientists to refine the impact and utility of scientific output. We will draw on particular experience gained from the program's involvement in i: personnel exchanges with central government departments; ii: interaction and co-operation with third party stakeholder organizations (e.g. the UK Climate Impacts Program); and iii: provision of written and oral briefings. Throughout, techniques

  2. 76 FR 18166 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2011-04-01

    ... National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY.... SUMMARY: The Technology Innovation Program Advisory Board, National Institute of Standards and Technology.... Cesaro's e-mail address is rene.cesaro@nist.gov . SUPPLEMENTARY INFORMATION: The Technology...

  3. Clean Technology Evaluation & Workforce Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Patricia Glaza

    2012-12-01

    The overall objective of the Clean Technology Evaluation portion of the award was to design a process to speed up the identification of new clean energy technologies and match organizations to testing and early adoption partners. The project was successful in identifying new technologies targeted to utilities and utility technology integrators, in developing a process to review and rank the new technologies, and in facilitating new partnerships for technology testing and adoption. The purpose of the Workforce Development portion of the award was to create an education outreach program for middle & high-school students focused on clean technology science and engineering. While originally targeting San Diego, California and Cambridge, Massachusetts, the scope of the program was expanded to include a major clean technology speaking series and expo as part of the USA Science & Engineering Festival on the National Mall in Washington, D.C.

  4. Characterization, Monitoring and Sensor Technology Integrated Program

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    This booklet contains summary sheets that describe FY 1993 characterization, monitoring, and sensor technology (CMST) development projects. Currently, 32 projects are funded, 22 through the OTD Characterization, Monitoring, and Sensor Technology Integrated Program (CMST-IP), 8 through the OTD Program Research and Development Announcement (PRDA) activity managed by the Morgantown Energy Technology Center (METC), and 2 through Interagency Agreements (IAGs). This booklet is not inclusive of those CMST projects which are funded through Integrated Demonstrations (IDs) and other Integrated Programs (IPs). The projects are in six areas: Expedited Site Characterization; Contaminants in Soils and Groundwater; Geophysical and Hydrogeological Measurements; Mixed Wastes in Drums, Burial Grounds, and USTs; Remediation, D&D, and Waste Process Monitoring; and Performance Specifications and Program Support. A task description, technology needs, accomplishments and technology transfer information is given for each project.

  5. International exchange program: findings from Taiwanese graduate nursing students.

    Science.gov (United States)

    Shieh, Carol

    2004-01-01

    This study explored Taiwanese graduate nursing students' transcultural experiences in the United States during an international exchange program. A qualitative method with content analysis was used to analyze journal entries on perceptions of American culture, American nursing, and reflections on personal and professional growth written by nine graduate nursing students from Taiwan. The mean age of the participants was 32 (range, 29-45). Taiwanese nursing students perceived American culture as full of hospitality and patriotism, valuing human rights and social welfare, and favoring direct and expressive affection. American nursing was viewed as a combination of independence, confidence, autonomy, and knowledge, with caring being the core element, fostered by an environment conducive to patient care. In personal and professional growth, three themes surfaced: reinforcement of holistic care, nursing without borders, and lifelong learning and changing. American culture and nursing were perceived by Taiwanese students as a paradigm of Western culture valuing individual rights, autonomy, and independence. A caring and supportive patient care environment was a positive perception of American nursing; it was the desired practice standard that was lacking in these students' homeland. Overall, the exchange program was thought by these students to foster their personal and professional growth.

  6. Programming and Technology for Accessibility in Geoscience

    Science.gov (United States)

    Sevre, E.; Lee, S.

    2013-12-01

    Many people, students and professors alike, shy away from learning to program because it is often believed to be something scary or unattainable. However, integration of programming into geoscience education can be a valuable tool for increasing the accessibility of content for all who are interested. It is my goal to dispel these myths and convince people that: 1) Students with disabilities can use programming to increase their role in the classroom, 2) Everyone can learn to write programs to simplify daily tasks, 3) With a deep understanding of the task, anyone can write a program to do a complex task, 4) Technology can be combined with programming to create an inclusive environment for all students of geoscience, and 5) More advanced knowledge of programming and technology can lead geoscientists to create software to serve as assistive technology in the classroom. It is my goal to share my experiences using technology to enhance the classroom experience as a way of addressing the aforementioned issues. Through my experience, I have found that programming skills can be included and learned by all to enhance the content of courses without detracting from curriculum. I hope that, through this knowledge, geoscience courses can become more accessible for people with disabilities by including programming and technology to the benefit of all involved.

  7. Clean Coal Technology Demonstration Program. Program update 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    The Clean Coal Technology Demonstration Program (CCT Program) is a $7.14 billion cost-shared industry/government technology development effort. The program is to demonstrate a new generation of advanced coal-based technologies, with the most promising technologies being moved into the domestic and international marketplace. Clean coal technologies being demonstrated under the CCT program are creating the technology base that allows the nation to meet its energy and environmental goals efficiently and reliably. The fact that most of the demonstrations are being conducted at commercial scale, in actual user environments, and under conditions typical of commercial operations allows the potential of the technologies to be evaluated in their intended commercial applications. The technologies are categorized into four market sectors: advanced electric power generation systems; environmental control devices; coal processing equipment for clean fuels; and industrial technologies. Sections of this report describe the following: Role of the Program; Program implementation; Funding and costs; The road to commercial realization; Results from completed projects; Results and accomplishments from ongoing projects; and Project fact sheets. Projects include fluidized-bed combustion, integrated gasification combined-cycle power plants, advanced combustion and heat engines, nitrogen oxide control technologies, sulfur dioxide control technologies, combined SO{sub 2} and NO{sub x} technologies, coal preparation techniques, mild gasification, and indirect liquefaction. Industrial applications include injection systems for blast furnaces, coke oven gas cleaning systems, power generation from coal/ore reduction, a cyclone combustor with S, N, and ash control, cement kiln flue gas scrubber, and pulse combustion for steam coal gasification.

  8. Building Technologies Program Multi-Year Program Plan Program Overview 2008

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-01-01

    Building Technologies Program Multi-Year Program Plan Program Overview 2008, including market overview and federal role, program vision, mission, design and structure, and goals and multi-year targets.

  9. Geothermal Technologies Program 2011 Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    Hollett, Douglas [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Stillman, Greg [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

    2011-06-01

    On June 6-10, 2011, the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Geothermal Technologies Program (GTP or the Program) conducted its annual program peer review in Bethesda, Maryland. In accordance with the EERE Peer Review Guide, the review provides an independent, expert evaluation of the strategic goals and direction of the program and is a forum for feedback and recommendations on future program planning. The purpose of the review was to evaluate DOE-funded projects for their contribution to the mission and goals of the Program and to assess progress made against stated objectives.

  10. Technology Partnership Program fiscal year 1998 program plan

    Energy Technology Data Exchange (ETDEWEB)

    Ford, R.

    1997-09-15

    The Oak Ridge Y-12 Plant will use the Technology Partnership Program to support the DOE nuclear weapons complex (NWC), particularly at the Oak Ridge Y-12 Plant. This support will be achieved through partnerships with industry that enhance the science and technology base and the core capabilities necessary to meet current and future weapons program mission needs. This program will enhance the Weapons Complex technology base and core capabilities by participating, in diversified portfolios of collaborative projects with industrial. The Y-12 Technology Partnership Program (TPP) closely aligns its program with the goals, objectives, and strategies of the DP Stockpile Stewardship and Management plans and DOE technology transfer policy. The Y-12 Defense Programs Office is the primary customer of the Y-12 TPP, and provides input to program planning and execution. Industry involvement is also an essential component. Programs and projects within the Y-12 TPP are responsive to identified weapons complex mission needs. In FY98 the Y-12 TPP will execute the plan devised during FY97 which emphasized the program`s increasing focus on providing benefits to DP. This plan called for the soft-landing of four terminated projects early in FY97 and the normal conclusion of four others at various times throughout the year. Successful conclusion of these projects enabled a call for new TPP projects in FY98 with clearer Defense Program benefits. The Defense Programs benefits were assured by the participation of Y-12`s Weapon Advisory Council, which met to determine proposal guidelines and criteria. The Weapons Advisory Council later met to rank each proposal against the established guidelines assuring those proposals with the best DP benefits would be chosen. The goal for the Y-12 TPP program will be to successfully implement the winning proposals in the first quarter of FY98 and maintain administrative and fiscal control over these and continuing projects.

  11. Technology Partnership Program fiscal year 1998 program plan

    Energy Technology Data Exchange (ETDEWEB)

    Ford, R.

    1997-09-15

    The Oak Ridge Y-12 Plant will use the Technology Partnership Program to support the DOE nuclear weapons complex (NWC), particularly at the Oak Ridge Y-12 Plant. This support will be achieved through partnerships with industry that enhance the science and technology base and the core capabilities necessary to meet current and future weapons program mission needs. This program will enhance the Weapons Complex technology base and core capabilities by participating, in diversified portfolios of collaborative projects with industrial. The Y-12 Technology Partnership Program (TPP) closely aligns its program with the goals, objectives, and strategies of the DP Stockpile Stewardship and Management plans and DOE technology transfer policy. The Y-12 Defense Programs Office is the primary customer of the Y-12 TPP, and provides input to program planning and execution. Industry involvement is also an essential component. Programs and projects within the Y-12 TPP are responsive to identified weapons complex mission needs. In FY98 the Y-12 TPP will execute the plan devised during FY97 which emphasized the program`s increasing focus on providing benefits to DP. This plan called for the soft-landing of four terminated projects early in FY97 and the normal conclusion of four others at various times throughout the year. Successful conclusion of these projects enabled a call for new TPP projects in FY98 with clearer Defense Program benefits. The Defense Programs benefits were assured by the participation of Y-12`s Weapon Advisory Council, which met to determine proposal guidelines and criteria. The Weapons Advisory Council later met to rank each proposal against the established guidelines assuring those proposals with the best DP benefits would be chosen. The goal for the Y-12 TPP program will be to successfully implement the winning proposals in the first quarter of FY98 and maintain administrative and fiscal control over these and continuing projects.

  12. Computer Programming Projects in Technology Courses.

    Science.gov (United States)

    Thomas, Charles R.

    1985-01-01

    Discusses programming projects in applied technology courses, examining documentation, formal reports, and implementation. Includes recommendations based on experience with a sophomore machine elements course which provided computers for problem solving exercises. (DH)

  13. Environmental Technology Verification Program (ETV) Policy Compendium

    Science.gov (United States)

    The Policy Compendium summarizes operational decisions made to date by participants in the U.S. Environmental Protection Agency's (EPA's) Environmental Technology Verification Program (ETV) to encourage consistency among the ETV centers. The policies contained herein evolved fro...

  14. A Program Office Guide to Technology Transfer

    Science.gov (United States)

    1988-11-01

    maintenance is emphasized, interchan- tions. Second source component verification geability requirements are pushed lower to the activities often are...technology tiansfer risk, the program office considers the following: 10.7 THE TECNOLOGY TRANSFERPLAN * Schedule intensity and concurrency The

  15. Appendix J - GPRA06 vehicle technologies program

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2009-01-18

    The target market for the Office of FreedomCAR and Vehicle Technologies (FCVT) program include light vehicles (cars and light trucks) and heavy vehicles (trucks more than 10,000 pounds Gross Vehicle Weight).

  16. The Military Critical Technologies Program's Space Systems Technologies

    Science.gov (United States)

    Wick, R.

    The major objectives of the Militarily Critical Technologies Program (MCTP) are to identify and characterize technologies by specific parameters including quantitative values and to assess worldwide technology capabilities. The MCTP program, which is sponsored by the office of the Deputy Under Secretary/ITS vice Under Secretary, develops the Militarily Critical Technologies List (MCTL) though the support of the Institute for Defense Analyses. This paper describes the MCTL and its Space Systems Technologies. It outlines the unique TWG process developed by the Institute for Defense Analyses (IDA) to support the MCTP. It also outlines the approach used to determine which technologies are included as well as how worldwide technology capability assessment for each technology is determined. Each TWG has a broad membership that includes representatives from government, industry and academia who are subject matter experts in their respective fields. Therefore, the TWG process provides a systematic, ongoing assessment and analysis of goods and technologies to determine technologies that are being developed worldwide that significantly enhance or degrade military capabilities.

  17. The Clean Coal Technology Program: Lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    The Clean Coal Technology (CCT) Program is a unique partnership between the federal government and industry that has as its primary goal the successful introduction of new clean coal utilization technologies into the energy marketplace. Clean coal technologies being demonstrated under the CCT Program are establishing a technology base that will enable the nation to meet more stringent energy and environmental goals. Most of the, demonstrations are being conducted at commercial scale, in actual user environments, and under circumstances typical of commercial operations. These features allow the potential of the technologies to be evaluated in their intended commercial applications. Each application addresses one of the following four market sectors: advanced electric power generation; environmental control devices; coal processing for clean fuels; and industrial applications. The purpose of this report is fourfold: Explain the CCT program as a model for successful joint government industry partnership for selecting and demonstrating technologies that have promise for adaptation to the energy marketplace; set forth the process by which the process has been implemented and the changes that have been made to improve that process; outline efforts employed to inform potential users and other interested parties about the technologies being developed; and examine some of the questions which must be considered in determining if the CCT Program model can be applied to other programs.

  18. Semiconductor technology program: Progress briefs

    Science.gov (United States)

    Galloway, K. F.; Scace, R. I.; Walters, E. J.

    1981-01-01

    Measurement technology for semiconductor materials, process control, and devices, is discussed. Silicon and silicon based devices are emphasized. Highlighted activities include semiinsulating GaAs characterization, an automatic scanning spectroscopic ellipsometer, linewidth measurement and coherence, bandgap narrowing effects in silicon, the evaluation of electrical linewidth uniformity, and arsenicomplanted profiles in silicon.

  19. 75 FR 10464 - Broadband Technology Opportunities Program

    Science.gov (United States)

    2010-03-08

    ... National Telecommunications and Information Administration RIN 0660-ZA28 Broadband Technology Opportunities... Technology Opportunities Program (BTOP) is extended until 5:00 p.m. Eastern Daylight Time (EDT) on March 26... Sustainable Broadband Adoption (SBA) projects. DATES: All applications for funding CCI projects must...

  20. Mine Waste Technology Program Electrochemical Tailings Cover

    Science.gov (United States)

    This report summarizes the results of Mine Waste Technology Program (MWTP) Activity III, Project 40, Electrochemical Tailings Cover, funded by the U.S. Environmental Protection Agency (EPA) and jointly administered by EPA and the U.S. Department of Energy (DOE). MSE Technology A...

  1. The Changing Nature of Educational Technology Programs

    Science.gov (United States)

    Spector, J. Michael

    2015-01-01

    The many changes in educational technologies have been well documented in both the professional and popular literature. What is less well documented is the changing nature of programs that prepare individuals for careers in the broad multi-disciplinary field of educational technology. This article is a first attempt to look at how educational…

  2. Solar Energy Technologies Program Newsletter - July 2009

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-07-01

    This quarterly newsletter is intended for participants and stakeholders in the DOE Solar Program. The content includes features on technology development, market transformation, and policy analysis for solar. Highlights include solar industry updates, DOE funding opportunity announcements and awards, and national laboratory technology developments.

  3. Characterization monitoring & sensor technology crosscutting program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    The purpose of the Characterization, Monitoring, and Sensor Technology Crosscutting Program (CMST-CP) is to deliver appropriate characterization, monitoring, and sensor technology (CMST) to the OFfice of Waste Management (EM-30), the Office of Environmental Restoration (EM-40), and the Office of Facility Transition and Management (EM-60).

  4. Solar Energy Technologies Program Newsletter - September 2009

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-10-01

    This quarterly newsletter is intended for participants and stakeholders in the DOE Solar Program. The content includes features on technology development, market transformation, and policy analysis for solar. Highlights include solar industry updates, DOE funding opportunity announcements and awards, and national laboratory technology developments.

  5. Mine Waste Technology Program Electrochemical Tailings Cover

    Science.gov (United States)

    This report summarizes the results of Mine Waste Technology Program (MWTP) Activity III, Project 40, Electrochemical Tailings Cover, funded by the U.S. Environmental Protection Agency (EPA) and jointly administered by EPA and the U.S. Department of Energy (DOE). MSE Technology A...

  6. Technology Refresh Program Launches Phase II | Poster

    Science.gov (United States)

    The Technology Refresh Program (TRP) is an NCI-funded initiative designed to promote efficient spending on computer equipment by providing staff members with access to the latest technology to meet their computing needs, said Kyle Miller, IT coordinator, Computer and Statistical Services (C&SS), NCI at Frederick.

  7. 75 FR 62369 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2010-10-08

    ... Innovation Program Advisory Board AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Technology Innovation Program Advisory Board... address is rene.cesaro@nist.gov . SUPPLEMENTARY INFORMATION: The Technology Innovation Program...

  8. NASA Lewis Research Center low-gravity fluid management technology program

    Science.gov (United States)

    Aydelott, J. C.; Carney, M. J.; Hochstein, J. I.

    1985-01-01

    A history of the Lewis Research Center in space fluid management technology program is presented. Current programs which include numerical modeling of fluid systems, heat exchanger/radiator concept studies, and the design of the Cryogenic Fluid Management Facility are discussed. Recent analytical and experimental activities performed to support the Shuttle/Centaur development activity are highlighted.

  9. Technology for Online Portfolio Assessment Programs

    Science.gov (United States)

    Ferrara, Victoria M.

    2010-01-01

    Portfolio assessment is a valid and reliable method to assess experiential learning. Developing a fully online portfolio assessment program is neither easy nor inexpensive. The institution seeking to take its portfolio assessment program online must make a commitment to its students by offering the technologies most suited to meet students' needs.…

  10. Commercial Refrigeration Technology. Florida Vocational Program Guide.

    Science.gov (United States)

    University of South Florida, Tampa. Dept. of Adult and Vocational Education.

    The program guide for commercial refrigeration technology courses in Florida identifies primary considerations for the organization, operation, and evaluation of a vocational education program. Following an occupational description for the job title for refrigeration mechanic, and its Dictionary of Occupational Titles code, are six sections…

  11. Telecommunications and Technology Infrastructure Program, 2013

    Science.gov (United States)

    California Community Colleges, Chancellor's Office, 2014

    2014-01-01

    This 16th annual report highlights up-to-date information on the programs supported through the Chancellor's Office Telecommunications and Technology Infrastructure Program (TTIP). To summarize 2012-13, one would describe it as a year of planning and preparation. The system-wide budget cuts of the past few years, reports of impacted classes, staff…

  12. VHTR engineering design study: intermediate heat exchanger program. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-11-01

    The work reported is the result of a follow-on program to earlier Very High Temperature Reactor (VHTR) studies. The primary use of the VHTR is to provide heat for various industrial processes, such as hydrocarbon reforming and coal gasification. For many processes the use of an intermediate heat transfer barrier between the reactor coolant and the process is desirable; for some processes it is mandatory. Various intermediate heat exchanger (IHX) concepts for the VHTR were investigated with respect to safety, cost, and engineering design considerations. The reference processes chosen were steam-hydrocarbon reforming, with emphasis on the chemical heat pipe, and steam gasification of coal. The study investigates the critically important area of heat transfer between the reactor coolant, helium, and the various chemical processes.

  13. HUMID AIR TURBINE CYCLE TECHNOLOGY DEVELOPMENT PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Richard Tuthill

    2002-07-18

    The Humid Air Turbine (HAT) Cycle Technology Development Program focused on obtaining HAT cycle combustor technology that will be the foundation of future products. The work carried out under the auspices of the HAT Program built on the extensive low emissions stationary gas turbine work performed in the past by Pratt & Whitney (P&W). This Program is an integral part of technology base development within the Advanced Turbine Systems Program at the Department of Energy (DOE) and its experiments stretched over 5 years. The goal of the project was to fill in technological data gaps in the development of the HAT cycle and identify a combustor configuration that would efficiently burn high moisture, high-pressure gaseous fuels with low emissions. The major emphasis will be on the development of kinetic data, computer modeling, and evaluations of combustor configurations. The Program commenced during the 4th Quarter of 1996 and closed in the 4th Quarter of 2001. It teamed the National Energy Technology Laboratory (NETL) with P&W, the United Technologies Research Center (UTRC), and a subcontractor on-site at UTRC, kraftWork Systems Inc. The execution of the program started with bench-top experiments that were conducted at UTRC for extending kinetic mechanisms to HAT cycle temperature, pressure, and moisture conditions. The fundamental data generated in the bench-top experiments was incorporated into the analytical tools available at P&W to design the fuel injectors and combustors. The NETL then used the hardware to conduct combustion rig experiments to evaluate the performance of the combustion systems at elevated pressure and temperature conditions representative of the HAT cycle. The results were integrated into systems analysis done by kraftWork to verify that sufficient understanding of the technology had been achieved and that large-scale technological application and demonstration could be undertaken as follow-on activity. An optional program extended the

  14. ORNL Superconducting Technology Program for Electric Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Hawsey, R.A. (comp.)

    1993-02-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy's (DOE's) Office of Conservation and Renewable Energy to develop the technology base needed by US industry for commercial development of electric power applications of high-temperature superconductivity. The two major elements of this program are wire development and systems development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY 1992 Peer Review of Projects, conducted by DOE's Office of Program Analysis, Office of Energy Research. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer to US industry. Working together, the collaborative teams are making tremendous progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire products.

  15. Lighting Computer Programs in Lighting Technology

    OpenAIRE

    Ekren, Nazmi; Dursun, Bahtiyar; Ercan AYKUT

    2008-01-01

    It is well known that the computer in lighting technology is a vital component for lighting designers. Lighting computer programs are preferred in preparing architectural projects in lighting techniques, especially in lighting calculations. Lighting computer programs, which arise with the aim of helping lighting designers, gain more interest day by day. The most important property of lighting computer programs is the ability to enable the simulation of lighting projects without requiring any ...

  16. A Language Exchange Program: Sustainability Innovation in Language and Culture Engagement

    Directory of Open Access Journals (Sweden)

    Trinidad Fernández

    2014-04-01

    Full Text Available Spanish Educational Laws over the past years have been promoting the widespread use of English as the vehicle for teaching and learning in most curricular subjects. This trend is evincing new needs especially among higher education students. Consequently, Spanish Universities are looking for ways to provide international training involving global partnerships. The Polytechnic University of Madrid, Spain (UPM, and the University of British Columbia, Okanagan, Canada (UBCO have come together to offer opportunities for international collaboration and learning, thus facilitating virtual encounters among Spanish and Canadian students. The Language Exchange Program between the UPM and UBCO acts as a model for sustainability innovation in language and culture engagement as the students can interact with native speakers in communication tasks. This interdisciplinary initiative supports the latest methodological principles observed in the Common European Framework for Languages [1], such as autonomous and life-long learning, self-assessment and peer-assessment as well as the incorporation of new technologies to the learning process. Additionally the 'virtual' mobility is provided at no extra cost. This article presents the preliminary results of two virtual exchange programs that have been offering varied forms of study which are venue-independent, promoting collaborative work and cultural exchange.

  17. Technology Solutions Case Study: Foundation Heat Exchanger, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-03-01

    The foundation heat exchanger, developed by Oak Ridge National Laboratory, is a new concept for a cost-effective horizontal ground heat exchanger that can be connected to water-to-water or water-to-air heat pump systems for space conditioning as well as domestic water heating.

  18. LITERATURE REVIEWS TO SUPPORT ION EXCHANGE TECHNOLOGY SELECTION FOR MODULAR SALT PROCESSING

    Energy Technology Data Exchange (ETDEWEB)

    King, W

    2007-11-30

    This report summarizes the results of literature reviews conducted to support the selection of a cesium removal technology for application in a small column ion exchange (SCIX) unit supported within a high level waste tank. SCIX is being considered as a technology for the treatment of radioactive salt solutions in order to accelerate closure of waste tanks at the Savannah River Site (SRS) as part of the Modular Salt Processing (MSP) technology development program. Two ion exchange materials, spherical Resorcinol-Formaldehyde (RF) and engineered Crystalline Silicotitanate (CST), are being considered for use within the SCIX unit. Both ion exchange materials have been studied extensively and are known to have high affinities for cesium ions in caustic tank waste supernates. RF is an elutable organic resin and CST is a non-elutable inorganic material. Waste treatment processes developed for the two technologies will differ with regard to solutions processed, secondary waste streams generated, optimum column size, and waste throughput. Pertinent references, anticipated processing sequences for utilization in waste treatment, gaps in the available data, and technical comparisons will be provided for the two ion exchange materials to assist in technology selection for SCIX. The engineered, granular form of CST (UOP IE-911) was the baseline ion exchange material used for the initial development and design of the SRS SCIX process (McCabe, 2005). To date, in-tank SCIX has not been implemented for treatment of radioactive waste solutions at SRS. Since initial development and consideration of SCIX for SRS waste treatment an alternative technology has been developed as part of the River Protection Project Waste Treatment Plant (RPP-WTP) Research and Technology program (Thorson, 2006). Spherical RF resin is the baseline media for cesium removal in the RPP-WTP, which was designed for the treatment of radioactive waste supernates and is currently under construction in Hanford, WA

  19. Standard cost elements for technology programs

    Science.gov (United States)

    Christensen, Carisa B.; Wagenfuehrer, Carl

    1992-01-01

    The suitable structure for an effective and accurate cost estimate for general purposes is discussed in the context of a NASA technology program. Cost elements are defined for research, management, and facility-construction portions of technology programs. Attention is given to the mechanisms for insuring the viability of spending programs, and the need for program managers is established for effecting timely fund disbursement. Formal, structures, and intuitive techniques are discussed for cost-estimate development, and cost-estimate defensibility can be improved with increased documentation. NASA policies for cash management are examined to demonstrate the importance of the ability to obligate funds and the ability to cost contracted funds. The NASA approach to consistent cost justification is set forth with a list of standard cost-element definitions. The cost elements reflect the three primary concerns of cost estimates: the identification of major assumptions, the specification of secondary analytic assumptions, and the status of program factors.

  20. 78 FR 54069 - Patient Protection and Affordable Care Act; Program Integrity: Exchange, SHOP, and Eligibility...

    Science.gov (United States)

    2013-08-30

    ... assisters in assisting consumers with obtaining Exchange coverage; provides for the handling consumer cases... Related to the Risk Corridors Program C. Part 155--Exchange Establishment Standards and Other Related... believe it is important that all issuers offering coverage within a State, both through the Exchanges...

  1. Characterization, monitoring, and sensor technology crosscutting program: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    The purpose of the Characterization, Monitoring, and Sensor Technology Crosscutting Program (CMST-CP) is to deliver appropriate characterization, monitoring, and sensor technology (CMST) to the Office of Waste Management (EM-30), the Office of Environmental Restoration (EM-40), and the Office of Facility Transition and Management (EM-60). The technology development must also be cost effective and appropriate to EM-30/40/60 needs. Furthermore, the required technologies must be delivered and implemented when needed. Accordingly, and to ensure that available DOE and other national resources are focused an the most pressing needs, management of the technology development is concentrated on the following Focus Areas: Contaminant Plume Containment and Remediation (PFA); Landfill Stabilization (LSFA); High-Level Waste Tank Remediation (TFA); Mixed Waste Characterization, Treatment, and Disposal (MWFA); and Facility Deactivation, Decommissioning, and Material Disposition (FDDMDFA). Brief descriptions of CMST-CP projects funded in FY95 are presented.

  2. Key technology of ship product data exchange based on STEP

    Science.gov (United States)

    Shi, Dong-Yan; Yang, Jing-Tong; Qiu, Chang-Hua; Xue, Kai

    2005-06-01

    In this paper, in order to implement the share and exchange of the ship product data, a new kind of global function model is established. By researching on the development and trend of the application of ship STEP (standard for the exchange of product model data) standards, the AIM (application interpreted model) of AP216 is developed and improved as an example, aiming at the characteristics and practical engineering of ship industry in our country. The data exchange interfaces are formed based on STEP in the CAD/CAM for the ship by all function modules and shared databases under the global function model. The share and exchange of all information and data are solved in the design, manufacture and all life-cycle of ship products among different computer application systems. The research work makes foundation for the ship industry informatization.

  3. Key technology of ship product data exchange based on STEP

    Institute of Scientific and Technical Information of China (English)

    SHI Dong-yan; YANG Jing-tong; QIU Chang-hua; XUE Kai

    2005-01-01

    In this paper, in order to implement the share and exchange of the ship product data, a new kind of global function model is established. By researching on the development and trend of the application of ship STEP (standard for the exchange of product model data) standards, the AIM (application interpreted model) of AP216 is developed and improved as an example, aiming at the characteristics and practical engineering of ship industry in our country. The data exchange interfaces are formed based on STEP in the CAD/CAM for the ship by all function modules and shared databases under the global function model. The share and exchange of all information and data are solved in the design, manufacture and all life-cycle of ship products among different computer application systems. The research work makes foundation for the ship industry informatization.

  4. The GEORED and Plate Boundary Observatory Engineer Exchange Program

    Science.gov (United States)

    Feaux, K.; Mora-Paez, H.

    2007-05-01

    In early 2007, the Colombian Institute of Geology and Mining - INGEOMINAS initiated GEORED (Geodesia: Red de Estudios de Deformación) in order to increase the knowledge of the geodynamics of northwestern South America. GEORED is an essential tool for determining crustal deformation and is primary in the analysis of inter- plate and intraplate deformation and the present seismic cycle. Some of the objectives of the project are to improve the technical, scientific, and operational capabilities of Colombian scientists regarding tectonic and volcanic deformation in Colombia, to implement a Colombian GPS permanent network for the study of geodynamics, with near real-time data retrieval and processing, and to establish a high precision geodetic reference frame for multipurpose activities within INGEOMINAS. Phase 1 of GEORED, which includes the installation of 30 permanent GPS stations in Colombia, will commence in early 2007. The Plate Boundary Observatory (PBO), part of the larger NSF-funded EarthScope project managed by UNAVCO, will study the three-dimensional strain field resulting from active plate boundary deformation across the Western United States. PBO is a large construction project involving the reconnaissance, permitting, installation, documentation, and maintenance of 875 permanent GPS stations scheduled for completion in September 2008. PBO is currently in the fourth year of the project, with over 550 GPS stations completed to date. INGEOMINAS recently became a member of the UNAVCO consortium. UNAVCO has been working with INGEOMINAS by providing technical support for the GEORED project relating to GPS receiver specifications. In the spirit of collaboration and outreach, INGEOMINAS and UNAVCO will begin an engineer exchange program starting in early summer 2007. The purpose of this outreach program is to provide a mechanism for the exchange of ideas relating to GPS station construction techniques, hardware designs, data communications, and data archiving

  5. Clean coal technology demonstration program: Program update 1996-97

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    The Clean Coal Technology Demonstration Program (known as the CCT Program) reached a significant milestone in 1996 with the completion of 20 of the 39 active projects. The CCT Program is responding to a need to demonstrate and deploy a portfolio of technologies that will assure the U.S. recoverable coal reserves of 297 billion tons could continue to supply the nation`s energy needs economically and in a manner that meets the nation`s environmental objectives. This portfolio of technologies includes environmental control devices that contributed to meeting the accords on transboundary air pollution recommended by the Special Envoys on Acid Rain in 1986. Operational, technical, environmental, and economic performance information and data are now flowing from highly efficient, low-emission, advanced power generation technologies that will enable coal to retain its prominent role into the next millennium. Further, advanced technologies are emerging that will enhance the competitive use of coal in the industrial sector, such as in steelmaking. Coal processing technologies will enable the entire coal resource base to be used while complying with environmental requirements. These technologies are producing products used by utilities and industrial processes. The capability to coproduce products, such as liquid and solid fuels, electricity, and chemicals, is being demonstrated at a commercial scale by projects in the CCT Program. In summary, this portfolio of technologies is satisfying the national need to maintain a multifuel energy mix in which coal is a key component because of its low-cost, availability, and abundant supply within the nation`s borders.

  6. Laser Science & Technology Program Annual Report - 2000

    Energy Technology Data Exchange (ETDEWEB)

    Chen, H-L

    2001-03-20

    The Laser Science and Technology (LS&T) Program Annual Report 2001 provides documentation of the achievements of the LLNL LS&T Program during the April 2001 to March 2002 period using three formats: (1) an Overview that is a narrative summary of important results for the year; (2) brief summaries of research and development activity highlights within the four Program elements: Advanced Lasers and Components (AL&C), Laser Optics and Materials (LO&M), Short Pulse Laser Applications and Technologies (SPLAT), and High-Energy Laser System and Tests (HELST); and (3) a compilation of selected articles and technical reports published in reputable scientific or technology journals in this period. All three elements (Annual Overview, Activity Highlights, and Technical Reports) are also on the Web: http://laser.llnl.gov/lasers/pubs/icfq.html. The underlying mission for the LS&T Program is to develop advanced lasers, optics, and materials technologies and applications to solve problems and create new capabilities of importance to the Laboratory and the nation. This mission statement has been our guide for defining work appropriate for our Program. A major new focus of LS&T beginning this past year has been the development of high peak power short-pulse capability for the National Ignition Facility (NIF). LS&T is committed to this activity.

  7. Geothermal Technologies Program Blue Ribbon Panel Recommendations

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2011-06-17

    The Geothermal Technologies Program assembled a geothermal Blue Ribbon Panel on March 22-23, 2011 in Albuquerque, New Mexico for a guided discussion on the future of geothermal energy in the United States and the role of the DOE Program. The Geothermal Blue Ribbon Panel Report captures the discussions and recommendations of the experts. An addendum is available here: http://www.eere.energy.gov/geothermal/pdfs/gtp_blue_ribbon_panel_report_addendum10-2011.pdf

  8. Usage of Wifi Technology for PLC Programming

    OpenAIRE

    Jaromír ŠKUTA

    2009-01-01

    This contribution describes usage of WIFI technology for programming and parameterization of application in PLC. INSYS WLAN unit from the Microelectronics INSYS Corporation is the base of application. Software access point with using USB WIFI component WL167 is running in industrial PC. Particular PC clients are connecting into network infrastructure PLC by the help of this access point and INSYS WLAN unit. This connection allows configuring and uploading program into this PLC.

  9. 77 FR 31724 - Exchange Visitor Program-Summer Work Travel; Correction

    Science.gov (United States)

    2012-05-30

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF STATE 22 CFR Part 62 RIN 1400-AD14 Exchange Visitor Program--Summer Work Travel; Correction AGENCY: Department of... Exchange Visitor Program--Summer Work Travel interim final rule published in the Federal Register on May...

  10. 76 FR 4350 - Health Information Technology Extension Program

    Science.gov (United States)

    2011-01-25

    ... HUMAN SERVICES Health Information Technology Extension Program ACTION: Public Notice. SUMMARY: This notice announces changes to the Health Information Technology Extension Program, which assists providers seeking to adopt and become meaningful users of health information technology, as authorized under...

  11. Overview of the NASA Lewis component technology program for Stirling power converters

    Science.gov (United States)

    Thieme, Lanny G.; Swec, Diane M.

    1992-01-01

    This paper presents an update on the NASA Lewis Stirling component technology program. The component technology program has been organized as part of the NASA Lewis effort to develop Stirling converter technology for space power applications. The Stirling space power program is part of the High Capacity Power element of the NASA Civil Space Technology Initiative. Lewis is also providing technical management of a DOE-funded project to develop Stirling converter systems for distributed dish solar terrestrial power applications. The Lewis component technology program is coordinated with the primary contract efforts of these projects but is aimed at longer term issues, advanced technologies, and independent assessments. Topics to be discussed include bearings, linear alternators, controls and load interaction, materials/life assessment, and heat exchangers.

  12. Overview of the NASA Lewis component technology program for Stirling power converters

    Science.gov (United States)

    Thieme, Lanny G.; Swec, Diane M.

    This paper presents an update on the NASA Lewis Stirling component technology program. The component technology program has been organized as part of the NASA Lewis effort to develop Stirling converter technology for space power applications. The Stirling space power program is part of the High Capacity Power element of the NASA Civil Space Technology Initiative. Lewis is also providing technical management of a DOE-funded project to develop Stirling converter systems for distributed dish solar terrestrial power applications. The Lewis component technology program is coordinated with the primary contract efforts of these projects but is aimed at longer term issues, advanced technologies, and independent assessments. Topics to be discussed include bearings, linear alternators, controls and load interaction, materials/life assessment, and heat exchangers.

  13. A Technology Program that Rescues Spacecraft

    Science.gov (United States)

    Deutsch, Leslie J.; Lesh, J. R.

    2004-03-01

    There has never been a long-duration deep space mission that did not have unexpected problems during operations. JPL's Interplanetary Network Directorate (IND) Technology Program was created to develop new and improved methods of communication, navigation, and operations. A side benefit of the program is that it maintains a cadre of human talent and experimental systems that can be brought to bear on unexpected problems that may occur during mission operations. Solutions fall into four categories: applying new technology during operations to enhance science performance, developing new operational strategies, providing domain experts to help find solutions, and providing special facilities to trouble-shoot problems. These are illustrated here using five specific examples of spacecraft anomalies that have been solved using, at least in part, expertise or facilities from the IND Technology Program: Mariner 10, Voyager, Galileo, SOHO, and Cassini/Huygens. In this era of careful cost management, and emphasis on returns-on-investment, it is important to recognize this crucial additional benefit from such technology program investments.

  14. ELECTRIC INFRASTRUCTURE TECHNOLOGY, TRAINING, AND ASSESSMENT PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    TREMEL, CHARLES L

    2007-06-28

    The objective of this Electric Infrastructure Technology, Training and Assessment Program was to enhance the reliability of electricity delivery through engineering integration of real-time technologies for wide-area applications enabling timely monitoring and management of grid operations. The technologies developed, integrated, tested and demonstrated will be incorporated into grid operations to assist in the implementation of performance-based protection/preventive measures into the existing electric utility infrastructure. This proactive approach will provide benefits of reduced cost and improved reliability over the typical schedule-based and as needed maintenance programs currently performed by utilities. Historically, utilities have relied on maintenance and inspection programs to diagnose equipment failures and have used the limited circuit isolation devices, such as distribution main circuit breakers to identify abnormal system performance. With respect to reliable problem identification, customer calls to utility service centers are often the sole means for utilities to identify problem occurrences and determine restoration methodologies. Furthermore, monitoring and control functions of equipment and circuits are lacking; thus preventing timely detection and response to customer outages. Finally, the two-way flow of real-time system information is deficient, depriving decision makers of key information required to effectively manage and control current electric grid demands to provide reliable customer service in abnormal situations. This Program focused on advancing technologies and the engineering integration required to incorporate them into the electric grid operations to enhance electrical system reliability and reduce utility operating costs.

  15. Application of Statistics in Engineering Technology Programs

    Science.gov (United States)

    Zhan, Wei; Fink, Rainer; Fang, Alex

    2010-01-01

    Statistics is a critical tool for robustness analysis, measurement system error analysis, test data analysis, probabilistic risk assessment, and many other fields in the engineering world. Traditionally, however, statistics is not extensively used in undergraduate engineering technology (ET) programs, resulting in a major disconnect from industry…

  16. Summary of the NASA Lewis component technology program for Stirling power converters

    Science.gov (United States)

    Thieme, Lanny G.; Swec, Diane M.

    1992-01-01

    An update is presented on the NASA Lewis Stirling component technology program. The component technology program has been organized as part of the NASA Lewis effort to develop Stirling converter technology for space power applications. The Stirling space power project is part of the High Capacity Power element of the NASA Civil Space Technology Initiative (CSTI). Lewis is also providing technical management of a DOE funded project to develop Stirling converter systems for distributed dish solar terrestrial power applications. The primary contractors for the space power and solar terrestrial projects develop component technologies directly related to their project goals. This Lewis component technology program, while coordinated with these main projects, is aimed at longer term issues, advanced technologies, and independent assessments. Topics to be discussed include bearings, linear alternators, controls and load interaction, materials/life assessment, and heat exchangers.

  17. Summary of the NASA Lewis component technology program for Stirling power converters

    Science.gov (United States)

    Thieme, Lanny G.; Swec, Diane M.

    1992-10-01

    An update is presented on the NASA Lewis Stirling component technology program. The component technology program has been organized as part of the NASA Lewis effort to develop Stirling converter technology for space power applications. The Stirling space power project is part of the High Capacity Power element of the NASA Civil Space Technology Initiative (CSTI). Lewis is also providing technical management of a DOE funded project to develop Stirling converter systems for distributed dish solar terrestrial power applications. The primary contractors for the space power and solar terrestrial projects develop component technologies directly related to their project goals. This Lewis component technology program, while coordinated with these main projects, is aimed at longer term issues, advanced technologies, and independent assessments. Topics to be discussed include bearings, linear alternators, controls and load interaction, materials/life assessment, and heat exchangers.

  18. Expectations and realities in the nuclear technology exchanges with the USSR

    Energy Technology Data Exchange (ETDEWEB)

    Lewin, J.

    1980-01-01

    A nontechnical, subjective account is given of some of the experiences and personal encounters in the US-USSR technical exchange visit programs. Some notes are given on the growth of nuclear power in the two countries. (DLC)

  19. 78 FR 6263 - Exchange Visitor Program-Fees and Charges

    Science.gov (United States)

    2013-01-30

    ... educational and cultural exchanges to be a significant part of the public diplomacy efforts of the President... Order. The Department has examined the economic benefits, costs, and transfers associated with this... diplomacy and an integral component of American foreign policy. The benefits of these exchanges to...

  20. EXCHANGE

    Energy Technology Data Exchange (ETDEWEB)

    Boltz, J.C. (ed.)

    1992-09-01

    EXCHANGE is published monthly by the Idaho National Engineering Laboratory (INEL), a multidisciplinary facility operated for the US Department of Energy (DOE). The purpose of EXCHANGE is to inform computer users about about recent changes and innovations in both the mainframe and personal computer environments and how these changes can affect work being performed at DOE facilities.

  1. International Symposium for the Promotion of APEC Environmental Technology Exchange; APEC kankyo gijutsu koryu sokushin symposium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-11

    The International Symposium for the Promotion of APEC Environmental Technology Exchange was held under the theme `The function and role expected of the APEC Virtual Center,` with the objectives of clarifying the need for future intra-regional environmental technological exchange, defining the types of information and personnel exchange, and promoting the use of interactive character of the APEC Virtual Center for Environmental Technology Exchange by encouraging access to and participation in the Virtual Center project. It was held in the period of 11th and 12th, November in 1996, at the venue of Rinku International Convention Center in Osaka. The symposium was attended by 477 persons from nine countries, i.e., Australia, Canada, China, Indonesia, Korea, Philippines, Thailand, the US, and Japan, comprising staff members of intra-regional environment-related organizations. After the keynote speech, `Current status and tasks of environmental technology exchange`, and `Expected roles of the Virtual Center for Environmental Technology Exchange` were discussed. During the plenary session, the chairman summarized the symposium. This summary was carried on the Virtual Center homepage of the Internet

  2. Short-term Graduate Student Research Exchange Programs for Teaching and Learning Foreign Languages

    OpenAIRE

    2015-01-01

    The authors developed and put into action a program which aims to explore effective foreign language teaching approaches through the joint effort of a short-term exchange program between graduate students of AUE (Aichi University of Education, Japan) and those of NCUE (National Changhua University of Education, Taiwan), with the goals of promoting graduate level research exchange, attaining a higher level of teaching research, and forging a research partnership. This program is supported by a...

  3. Annual highlights of the energy technology programs

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-01

    The Energy Storage and Conversion Division reports summary activities in the following: electrolysis-based hydrogen energy storage systems; an electrochemically regenerative hydrogen--halogen energy storage system; fuel cells (materials and electrolysis); high temperature water electrolysis; hydrogen energy storage systems for automobile propulsion; program planning for research related to energy conservation; New York Energy Office oil retrofit pilot program; burner-boiler/furnace testing; and proposed programs. The Engineering Division reports on solar-assisted heat pump systems; solar cooling subsystems and systems; solar demonstration project in Northeast U.S.; hardware simulators for tests of solar cooling/heating systems; fossil-energy programs; catalytic process for conversion of synthesis gas to methanol; coal-fired heater; coal/oil mixture combustion; rotating fluidized bed containing limestone for removal of sulfur from hot gases; improved oil and gas burners; residue and waste fuels; and proposed programs. The Conservation Program Management Group reports on conservation program management; space conditioning, diagnostics, and controls technology for conservation in buildings; and energy conservation in residential buildings. Funding for 1978 and 1979 for each program is indicated. (MCW)

  4. Wilberforce Power Technology in Education Program

    Science.gov (United States)

    Gordon, Edward M.; Buffinger, D. R.; Hehemann, D. G.; Breen, M. L.; Raffaelle, R. P.

    1999-01-01

    The Wilberforce Power Technology in Education Program is a multipart program. Three key parts of this program will be described. They are: (1) WISE-The Wilberforce Summer Intensive Experience. This annual offering is an educational program which is designed to provide both background reinforcement and a focus on study skills to give the participants a boost in their academic performance throughout their academic careers. It is offered to entering Wilberforce students. Those students who take advantage of WISE learn to improve important skills which enable them to work at higher levels in mathematics, science and engineering courses throughout their college careers, but most notably in the first year of college study. (2) Apply technology to reaming. This is being done in several ways including creating an electronic chemistry text with hypertext links to a glossary to help the students deal with the large new vocabulary required to describe and understand chemistry. It is also being done by converting lecture materials for the Biochemistry class to PowerPoint format. Technology is also being applied to learning by exploring simulation software of scientific instrumentation. (3) Wilberforce participation in collaborative research with NASA's John H. Glenn Research Center at Lewis Field. This research has focused on two areas in the past year. The first of these is the deposition of solar cell materials. A second area involves the development of polymeric materials for incorporation into thin film batteries.

  5. Exchange program. Alternative options for purchase of environmentally friendly vehicles in Stockholm

    Energy Technology Data Exchange (ETDEWEB)

    Rader Olsson, Amy [Inregia AB, Stockholm (Sweden); Elam, N. [Atrax Energi AB, Goeteborg (Sweden)

    1999-11-01

    The city of Stockholm has decided to exchange 300 of its gasoline-driven vehicles for vehicles which emit fewer hazardous pollutants. A vehicle exchange program is being developed based on analyses which describe the driving patterns of Stockholm's vehicles, alternative fuel technology status, and financing alternatives. This report comprises the first two analyses, that of Stockholm's fleet driving patterns and alternative fuel technology options. The report has four major sections: * a technical analysis of the status of certain fuels and vehicles, including prognoses of availability in Sweden and the future development potential of each. (electric, biogas, ethanol, RME), * a driving study, which identifies those vehicles currently in Stockholm's fleet which could be exchanged for alternatively-fueled vehicles, * an analysis of five purchase package alternatives, and * a location analysis, which describes the accessibility of vehicles in each alternative to alternative fuel refueling facilities in Stockholm. Given current prices and availability of the alternative fuels and vehicles studied, we recommend a high share of electric and biogas vehicles for purchases during 1997. The cost-effectiveness of different vehicle types in their reduction of various hazardous pollutants, may however change dramatically as prices and availability of vehicles changes and the market for alternative fuels develops. Accessibility to alternative fuel refueling facilities is adequate in Stockholm, though not always ideal. To improve the accessibility of biogas vehicles further, we suggest a third biogas refueling facility in the city's northeastern area (Ropsten, Vaertahamnen). If MFO chooses to purchase a significant number of diesel passenger vehicles to be driven on RME; we propose that a facility in the northeastern area would improve accessibility more than another facility in southern Stockholm.

  6. Description of emission control using fluidized-bed, heat-exchange technology

    Energy Technology Data Exchange (ETDEWEB)

    Vogel, G.J.; Grogan, P.J.

    1980-06-01

    Environmental effects of fluidized-bed, waste-heat recovery technology are identified. The report focuses on a particular configuration of fluidized-bed, heat-exchange technology for a hypothetical industrial application. The application is a lead smelter where a fluidized-bed, waste-heat boiler (FBWHB) is used to control environmental pollutants and to produce steam for process use. Basic thermodynamic and kinetic information for the major sulfur dioxide (SO/sub 2/) and NO/sub x/ removal processes is presented and their application to fluidized-bed, waste heat recovery technology is discussed. Particulate control in fluidized-bed heat exchangers is also discussed.

  7. Use of communication technologies in document exchange for the management of construction projects

    Directory of Open Access Journals (Sweden)

    Mesároš Peter

    2016-06-01

    Full Text Available Information and communication technologies represent a set of people, processes, technical and software tools providing collection, transport, storage and processing of data for distribution and presentation of information. Particularly communication systems are the main tool for information exchange. Of the other part, these technologies have a broad focus and use. One of them is the exchange of documents in the management of construction projects. Paper discusses the issue of exploitation level of communication technologies in construction project management. The main objective of this paper is to analyze exploitation level of communication technologies. Another aim of the paper is to compare exploitation level or rate of document exchange by electronic communication devices and face-to-face communication.

  8. Use of communication technologies in document exchange for the management of construction projects

    Science.gov (United States)

    Mesároš, Peter; Mandičák, Tomáš

    2016-06-01

    Information and communication technologies represent a set of people, processes, technical and software tools providing collection, transport, storage and processing of data for distribution and presentation of information. Particularly communication systems are the main tool for information exchange. Of the other part, these technologies have a broad focus and use. One of them is the exchange of documents in the management of construction projects. Paper discusses the issue of exploitation level of communication technologies in construction project management. The main objective of this paper is to analyze exploitation level of communication technologies. Another aim of the paper is to compare exploitation level or rate of document exchange by electronic communication devices and face-to-face communication.

  9. The space shuttle program technologies and accomplishments

    CERN Document Server

    Sivolella, Davide

    2017-01-01

    This book tells the story of the Space Shuttle in its many different roles as orbital launch platform, orbital workshop, and science and technology laboratory. It focuses on the technology designed and developed to support the missions of the Space Shuttle program. Each mission is examined, from both the technical and managerial viewpoints. Although outwardly identical, the capabilities of the orbiters in the late years of the program were quite different from those in 1981. Sivolella traces the various improvements and modifications made to the shuttle over the years as part of each mission story. Technically accurate but with a pleasing narrative style and simple explanations of complex engineering concepts, the book provides details of many lesser known concepts, some developed but never flown, and commemorates the ingenuity of NASA and its partners in making each Space Shuttle mission push the boundaries of what we can accomplish in space. Using press kits, original papers, newspaper and magazine articles...

  10. Building technologies program. 1995 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Selkowitz, S.E.

    1996-05-01

    The 1995 annual report discusses laboratory activities in the Building Technology Program. The report is divided into four categories: windows and daylighting, lighting systems, building energy simulation, and advanced building systems. The objective of the Building Technologies program is to assist the U.S. building industry in achieving substantial reductions in building-sector energy use and associated greenhouse gas emissions while improving comfort, amenity, health, and productivity in the building sector. Past efforts have focused on windows and lighting, and on the simulation tools needed to integrate the full range of energy efficiency solutions into achievable, cost-effective design solutions for new and existing buildings. Current research is based on an integrated systems and life-cycle perspective to create cost-effective solutions for more energy-efficient, comfortable, and productive work and living environments. Sixteen subprograms are described in the report.

  11. Fostering internationalization: an American-Danish semester-long undergraduate nursing student exchange program.

    Science.gov (United States)

    Baernholdt, M; Drake, E; Maron, F; Neymark, K

    2013-06-01

    This paper describes the development, implementation and evaluation of a semester-long exchange program between two Bachelor of Science in Nursing programs in the USA and Denmark. Nurses globally need to provide culturally sensitive care for an ethnically diverse population. Competencies on how to do so should start in basic nursing programs. A useful strategy is through immersion into another culture through an exchange program. Little is known about successful strategies for two-way or 360° exchange programs between schools from different countries. Guided by experiential learning theory, we developed an exchange program with the objective of enhancing nursing students' cultural competence through knowledge building, attitudes and behaviour development. Lessons learned and implications for educational institutions and policy are discussed. In internationalization of nursing education, an awareness of underlying cultural values regarding nursing competence and taking appropriate action are important for success. Other areas for a successful exchange program include matching of courses or content across schools, clear objectives and evaluation plans. Finally, flexibility and open communication are key components when setting up a 360° exchange program. © 2013 The Authors. International Nursing Review © 2013 International Council of Nurses.

  12. The NASA Scientific and Technical Information (STI) Program's Implementation of Open Archives Initiation (OAI) for Data Interoperability and Data Exchange

    Science.gov (United States)

    Rocker, JoAnne; Roncaglia, George J.; Heimerl, Lynn N.; Nelson, Michael L.

    2002-01-01

    Interoperability and data-exchange are critical for the survival of government information management programs. E-government initiatives are transforming the way the government interacts with the public. More information is to be made available through web-enabled technologies. Programs such as the NASA's Scientific and Technical Information (STI) Program Office are tasked to find more effective ways to disseminate information to the public. The NASA STI Program is an agency-wide program charged with gathering, organizing, storing, and disseminating NASA-produced information for research and public use. The program is investigating the use of a new protocol called the Open Archives Initiative (OAI) as a means to improve data interoperability and data collection. OAI promotes the use of the OAI harvesting protocol as a simple way for data sharing among repositories. In two separate initiatives, the STI Program is implementing OAI In collaboration with the Air Force, Department of Energy, and Old Dominion University, the NASA STI Program has funded research on implementing the OAI to exchange data between the three organizations. The second initiative is the deployment of OAI for the NASA technical report server (TRS) environment. The NASA TRS environment is comprised of distributed technical report servers with a centralized search interface. This paper focuses on the implementation of OAI to promote interoperability among diverse data repositories.

  13. ATP Interior Noise Technology and Flight Demonstration Program

    Science.gov (United States)

    Stephens, David G.; Powell, Clemans A.

    1988-01-01

    The paper provides an overview of the ATP (Advanced Turboprop Program) acoustics program with emphasis on the NASA technology program and the recent NASA/Industry demonstration programs aimed at understanding and controlling passenger cabin noise. Technology developments in propeller (source) noise, cabin noise transmission, and subjective acoustics are described. Finally, an overview of the industry demonstrator programs is presented.

  14. Divison of Environmental Control Technology program, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Mott, William E.

    1979-06-01

    This report covers Division of Environmental Control Technology projects in progress during FY 1978, within the Office of the Assistant Secretary for Environment, Department of Energy. It is the second in a planned series of annual reports. The Division of Environmental Control Technology (ECT) continues to support the Assistant Secretary for Environment (EV) in discharging two primary responsibilities: (1) under the Environmental Engineering (EE) Program, the independent overview and assessment of environmental control aspects of both the U.S. Department of Energy's (DOE) research, development, and demonstration (RD and D) programs and the Nation's energy policies, and (2) under the Decontamination and Decommissioning Program, the reduction of potential environmental hazards at the radioactively contaminated sites that are presently owned or were formerly used by the Government. This report presents a short summary of objectives, approach, progress and results, future plans, and a reference bibliography for each research, development, or assessment project within the program areas described above.

  15. Raising societal support for development cooperation: The role of students' exchange programs

    NARCIS (Netherlands)

    Eerdewijk, A.H.J.M. van; Westeneng, J.; Hoop, T.J. de; Ruben, R.

    2009-01-01

    This article analyzes the development education and exchange activities of the Dutch development organization Edukans with its longstanding experience in the “Going Global” program among secondary schools in The Netherlands. Based on a survey with 186 direct participants in the foreign exchange prog

  16. IPIRG programs - advances in pipe fracture technology

    Energy Technology Data Exchange (ETDEWEB)

    Wilkowski, G.; Olson, R.; Scott, P. [Batelle, Columbus, OH (United States)

    1997-04-01

    This paper presents an overview of the advances made in fracture control technology as a result of the research performed in the International Piping Integrity Research Group (IPIRG) program. The findings from numerous experiments and supporting analyses conducted to investigate the behavior of circumferentially flawed piping and pipe systems subjected to high-rate loading typical of seismic events are summarized. Topics to be discussed include; (1) Seismic loading effects on material properties, (2) Piping system behavior under seismic loads, (3) Advances in elbow fracture evaluations, and (4) {open_quotes}Real{close_quotes} piping system response. The presentation for each topic will be illustrated with data and analytical results. In each case, the state-of-the-art in fracture mechanics prior to the first IPIRG program will be contrasted with the state-of-the-art at the completion of the IPIRG-2 program.

  17. Development of a micro-heat exchanger with stacked plates using LTCC technology

    Directory of Open Access Journals (Sweden)

    E. Vásquez-Alvarez

    2010-09-01

    Full Text Available A green ceramic tape micro-heat exchanger was developed using Low Temperature Co-fired Ceramics technology (LTCC. The device was designed by using Computational Aided Design software and simulations were made using a Computational Fluid Dynamics package (COMSOL Multiphysics to evaluate the homogeneity of fluid distribution in the microchannels. Four geometries were proposed and simulated in two and three dimensions to show that geometric details directly affect the distribution of velocity in the micro-heat exchanger channels. The simulation results were quite useful for the design of the microfluidic device. The micro-heat exchanger was then constructed using the LTCC technology and is composed of five thermal exchange plates in cross-flow arrangement and two connecting plates, with all plates stacked to form a device with external dimensions of 26 x 26 x 6 mm³.

  18. 78 FR 4593 - Medicaid, Children's Health Insurance Programs, and Exchanges: Essential Health Benefits in...

    Science.gov (United States)

    2013-01-22

    ... 42 CFR Parts 430, 431, 433, et al. 45 CFR Part 155 Medicaid, Children's Health Insurance Programs... Health Insurance Programs, and Exchanges: Essential Health Benefits in Alternative Benefit Plans... Affordable Care Act), and the Children's Health Insurance Program Reauthorization Act of 2009 (CHIPRA). This...

  19. Analysis of the Technological Parameters of the Heat Exchanger in the Heating Pipe

    Directory of Open Access Journals (Sweden)

    Knyazev Vladimir

    2017-01-01

    Full Text Available The main purpose of this article is to analyze the selecting of technological parameters for the heat exchanger to improve the heat transfer and reduce the noise during operation in the heating pipe, which is used in the different systems of the planes and helicopters. In result of this study, the best technical parameters are found, considering different variations of deformation cutting heat exchanger pipes.

  20. Clean coal technology: Export finance programs

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-30

    Participation by US firms in the development of Clean Coal. Technology (CCT) projects in foreign countries will help the United States achieve multiple national objectives simultaneously--addressing critical goals related to energy, environmental technology, industrial competitiveness and international trade. US participation in these projects will result in an improved global environment, an improvement in the balance of payments and an increase in US jobs. Meanwhile, host countries will benefit from the development of economically- and environmentally-sound power facilities. The Clean Air Act Amendments of 1990 (Public Law 101-549, Section 409) as supplemented by a requirement in the Energy Policy Act of 1992 (Public Law 102-486, Section 1331(f)) requires that the Secretary of Energy, acting through the Trade Promotion Coordinating Committee Subgroup on Clean Coal Technologies, submit a report to Congress with information on the status of recommendations made in the US Department of Energy, Clean Coal Technology Export Programs, Report to the United States Congress, February 1992. Specific emphasis is placed on the adequacy of financial assistance for export of CCTS. This report fulfills the requirements of the Act. In addition, although this report focuses on CCT power projects, the issues it raises about the financing of these projects are also relevant to other CCT projects such as industrial applications or coal preparation, as well as to a much broader range of energy and environmental technology projects worldwide.

  1. Identity Orientation, Social Exchange, and Information Technology Use in Interorganizational Collaborations

    DEFF Research Database (Denmark)

    Gal, Uri; Jensen, Tina Blegind; Lyytinen, Kalle

    2014-01-01

    Advances in information technologies (IT) are creating unprecedented opportunities for interorganizational collaboration, particularly in large-scale distributed projects. The use of advanced IT in such projects can foster new forms of social exchange among organizations and change the way...... identity orientations. To address this gap, we conduct multiple case studies that describe the changing use of two-dimensional computer-aided design technology and new three-dimensional modeling technologies by a leading metal fabrication company in the architecture, engineering, and construction industry....... The case studies demonstrate that changes in the company's IT and the enactment of related IT affordances within variable interorganizational contexts enable new forms of social exchanges. These exchanges, in turn, provide the context for the rearticulation of the company's identity orientation. Based...

  2. Wood energy Technology Program; Puuenergian teknologiaohjelma

    Energy Technology Data Exchange (ETDEWEB)

    Hakkila, P. [VTT Energy, Espoo (Finland)

    1999-07-01

    The National Wood Energy Technology Program focuses on developing the production technology and improving the quality of forest chips from logging residues and small- sized trees. In 1998, energy use of forest chips in Finland amounted to 0.5 million solid-m{sup 3}. The main research areas of the program are: integration of energy production into industrial wood production in the conventional forestry; development of planning and logistics in the production and storage of forest chips; development of technology for chipping, handling and storage including operations at chip terminals and at the end-users facilities; development of long-distance transport of fuel chips and unchipped forest residues; preparing forest machine and truck contractors for the production of forest chips on a large scale; development of quality control to improve the heat value of the chips; and the operational reliability of wood chip-fired plants improving the handling and combustion properties of bark, sawdust and other solid wood residues from forest industry. The total budget for 1999 - 2003 is million FIM 250, Tekes' share of which amounts to million FIM 50.

  3. Laser Science and Technology Program Update 2001

    Energy Technology Data Exchange (ETDEWEB)

    Chen, H L; Hackel, L A

    2002-01-01

    The Laser Science and Technology (LS&T) Program's mission is to develop advanced solid-state lasers, optics, materials technologies, and applications to solve problems and create new capabilities of importance to the Nation and the Laboratory. A top, near-term priority is to provide technical support to the National Ignition Facility (NIF) to ensure activation success. LS&T provides the NIF Programs with core competencies and supports its economic viability. The primary objectives of LS&T activities in fiscal year (FY) 2001 have been threefold: (1) to support deployment of hardware and to enhance lasers and optics performance for NIF, (2) to develop advanced solid-state laser systems and optical components for the Department of Energy (DOE) and the Department of Defense (DoD), and (3) to invent, develop, and deliver improved concepts and hardware for other government agencies and U.S. industry. Special efforts have also been devoted to building and maintaining our capabilities in three technology areas: high-power solid-state lasers, high-power optical materials, and applications of advanced lasers.

  4. Research and technology operating plan summary: Fiscal year 1975 research and technology program. [space programs, energy technology, and aerospace sciences

    Science.gov (United States)

    1975-01-01

    Summaries are presented of Research and Technology Operating Plans currently in progress throughout NASA. Citations and abstracts of the operating plans are presented along with a subject index, technical monitor index, and responsible NASA organization index. Research programs presented include those carried out in the Office of Aeronautics and Space Technology, Office of Energy Programs, Office of Applications, Office of Space Sciences, Office of Tracking and Data Acquisition, and the Office of Manned Space Flight.

  5. Analysis of Engineering Content within Technology Education Programs

    Science.gov (United States)

    Fantz, Todd D.; Katsioloudis, Petros J.

    2011-01-01

    In order to effectively teach engineering, technology teachers need to be taught engineering content, concepts, and related pedagogy. Some researchers posit that technology education programs may not have enough content to prepare technology teachers to teach engineering design. Certain technology teacher education programs have responded by…

  6. National Advanced Drilling and Excavation Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1993-06-15

    The second meeting of Federal agency representatives interested in the National Advanced Drilling and Excavation Technologies (NADET) Program took place on June 15, 1993. The Geothermal Division of the U.S. Department of Energy (DOE) hosted the meeting at the Washington, D.C., offices of DOE. Representatives from the National Science Foundation, U.S. Geological Survey, U.S. Bureau of Mines, National Institute of Standards and Technology, National Aeronautics and Space Administration, Environmental Protection Agency, and various offices within the Department of Energy attended. For a complete list of attendees see Attachment A. The purpose of the meeting was: (1) to cover the status of efforts to gain formal approval for NADET, (2) to brief participants on events since the last meeting, especially two recent workshops that explored research needs in drilling and excavation, (3) to review some recent technological advances, and (4) to solicit statements of the importance of improving drilling and excavation technologies to the missions of the various agencies. The meeting agenda is included as Attachment B.

  7. Solid Polymer Electrolyte Fuel Cell Technology Program

    Science.gov (United States)

    1980-01-01

    Work is reported on phase 5 of the Solid Polymer Electrolyte (SPE) Fuel Cell Technology Development program. The SPE fuel cell life and performance was established at temperatures, pressures, and current densities significantly higher than those previously demonstrated in sub-scale hardware. Operation of single-cell Buildup No. 1 to establish life capabilities of the full-scale hardware was continued. A multi-cell full-scale unit (Buildup No. 2) was designed, fabricated, and test evaluated laying the groundwork for the construction of a reactor stack. A reactor stack was then designed, fabricated, and successfully test-evaluated to demonstrate the readiness of SPE fuel cell technology for future space applications.

  8. Promoting medical competencies through international exchange programs: benefits on communication and effective doctor-patient relationships

    Science.gov (United States)

    2014-01-01

    Background Universities are increasingly organizing international exchange programs to meet the requirements of growing globalisation in the field of health care. Analyses based on the programs’ fundamental theoretical background are needed to confirm the learning value for participants. This study investigated the extent of sociocultural learning in an exchange program and how sociocultural learning affects the acquisition of domain-specific competencies. Methods Sociocultural learning theories were applied to study the learning effect for German medical students from the LMU Munich, Munich, Germany, of participation in the medical exchange program with Jimma University, Jimma, Ethiopia. First, we performed a qualitative study consisting of interviews with five of the first program participants. The results were used to develop a questionnaire for the subsequent, quantitative study, in which 29 program participants and 23 matched controls performed self-assessments of competencies as defined in the Tuning Project for Health Professionals. The two interrelated studies were combined to answer three different research questions. Results The participants rated their competence significantly higher than the control group in the fields of doctor-patient relationships and communication in a medical context. Participant responses in the two interrelated studies supported the link between the findings and the suggested theoretical background. Conclusion Overall, we found that the exchange program affected the areas of doctor-patient relationships and effective communication in a medical context. Vygotsky’s sociocultural learning theory contributed to explaining the learning mechanisms of the exchange program. PMID:24589133

  9. The NASA space power technology program

    Science.gov (United States)

    Stephenson, R. Rhoads

    NASA has a broad technology program in the field of space power. This paper describes that program, including the roles and responsibilities of the various NASA field centers and major contractors. In the power source area, the paper discusses the SP-100 Space Nuclear Power Project, which has been under way for about seven years and is making substantial progress toward development of components for a 100-kilowatt power system that can be scaled to other sizes. This system is a candidate power source for nuclear electric propulsion, as well as for a power plant for a lunar base. In the energy storage area, the paper describes NASA's battery- and fuel-cell development programs. NASA is actively working on NiCd, NiH2, and lithium batteries. A status update is also given on a U.S. Air Force-sponsored program to develop a large (150 ampere-hour) lithium-thionyl chloride battery for the Centaur upper-stage launch vehicle. Finally, the area of power management and distribution (PMAD) is addressed, including power system components such as solid-state switches and power integrated circuits. Automated load management and other computer-controlled functions offer considerable payoffs. The state of the art in space power is described, along with NASA's medium- and long-term goals in the area.

  10. Environmental support to the clean coal technology program

    Energy Technology Data Exchange (ETDEWEB)

    Miller, R.L.

    1996-06-01

    Work during this period focused on the preparation for DOE`s Morgantown Energy Technology Center (METC) of a final Environmental Assessment (EA) for the Externally Fired Combined Cycle (EFCC) Project in Warren, Pennsylvania. Proposed by the Pennsylvania Electric Company (Penelec) and selected by DOE in the fifth solicitation of the CCT Program, the project would be sited at one of the two units at Penelec`s Warren Station. The EFCC Project proposes to replace two existing boilers with a new {open_quotes}power island{close_quotes} consisting of a staged coal combustor, slag screen, heat exchanger, an indirectly fired gas turbine, and a heat recovery steam generator. Subsequently, Unit 2 would operate in combined-cycle mode using the new gas turbine and the existing steam turbine simultaneously. The gas turbine would generate 25 megawatts of electricity so that Unit 2 output would increase from the existing 48 megawatts generated by the steam turbine to a total of 73 megawatts. Operation of a conventional flue gas desulfurization dry scrubber as part of the EFCC technology is expected to decrease SO{sub 2} emissions by 90% per kilowatt-hour of electricity generated, and NO{sub x} emissions are anticipated to be 60% less per kilowatt-hour of electricity generated because of the staged combustor. Because the EFCC technology would be more efficient, less carbon dioxide (CO{sub 2}) would be emitted to the atmosphere per kilowatt-hour of electricity produced.

  11. Space Technology Mission Directorate Game Changing Development Program FY2015 Annual Program Review: Advanced Manufacturing Technology

    Science.gov (United States)

    Vickers, John; Fikes, John

    2015-01-01

    The Advance Manufacturing Technology (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of the Initiative is the Advanced Manufacturing National Program Office (AMNPO), which includes participation from all federal agencies involved in U.S. manufacturing. In support of the AMNPO the AMT Project supports building and Growing the National Network for Manufacturing Innovation through a public-private partnership designed to help the industrial community accelerate manufacturing innovation. Integration with other projects/programs and partnerships: STMD (Space Technology Mission Directorate), HEOMD, other Centers; Industry, Academia; OGA's (e.g., DOD, DOE, DOC, USDA, NASA, NSF); Office of Science and Technology Policy, NIST Advanced Manufacturing Program Office; Generate insight within NASA and cross-agency for technology development priorities and investments. Technology Infusion Plan: PC; Potential customer infusion (TDM, HEOMD, SMD, OGA, Industry); Leverage; Collaborate with other Agencies, Industry and Academia; NASA roadmap. Initiatives include: Advanced Near Net Shape Technology Integrally Stiffened Cylinder Process Development (launch vehicles, sounding rockets); Materials Genome; Low Cost Upper Stage-Class Propulsion; Additive Construction with Mobile Emplacement (ACME); National Center for Advanced Manufacturing.

  12. Laser Science and Technology Program Update 2002

    Energy Technology Data Exchange (ETDEWEB)

    Hackel, L A; Chen, H L

    2003-03-01

    The Laser Science and Technology (LS&T) Program's mission is to develop advanced lasers, optics, materials technologies, and applications to solve problems and create new capabilities of importance to the nation and the Laboratory. A top, near-term priority is to provide technical support in the deployment and upgrade of the National Ignition Facility (NIF). Our other program activities synergistically develop technologies that are of interest to the NIF Directorate but outside the scope of the NIF funding. The primary objectives of LS&T activities in 2002 have been fourfold--(a) to support deployment of hardware and to enhance laser and optics performance for NIF, (b) to develop high-energy petawatt laser science and technology for the Department of Energy (DOE), (c) to develop advanced solid-state laser systems and optical components for the Department of Defense (DoD), and to invent develop, and deliver improved concepts and hardware for other government agencies and industry. Special efforts have been devoted to building and maintaining our capabilities in three technology areas: high-power short-pulse solid-state lasers, high-power optical materials, and applications of advanced lasers. LS&T activities during 2002 focused on seven major areas: (1) NIF Project--LS&T led major advances in the deployment of NIF Final Optics Assembly (FOA) and the development of 3{omega} optics processing and treatment technologies to enhance NIF's operations and performance capabilities. (2) Stockpile Stewardship Program (SSP)--LS&T personnel continued development of ultrashort-pulse lasers and high-power, large-aperture optics for applications in SSP, extreme-field science and national defense. To enhance the high-energy petawatt (HEPW) capability in NIF, LS&T continued development of advanced compressor-grating and front-end laser technologies utilizing optical-parametric chirped-pulse amplification (OPCPA). (3) High-energy-density physics and inertial fusion energy

  13. Laser Science and Technology Program Update 2002

    Energy Technology Data Exchange (ETDEWEB)

    Hackel, L A; Chen, H L

    2003-03-01

    The Laser Science and Technology (LS&T) Program's mission is to develop advanced lasers, optics, materials technologies, and applications to solve problems and create new capabilities of importance to the nation and the Laboratory. A top, near-term priority is to provide technical support in the deployment and upgrade of the National Ignition Facility (NIF). Our other program activities synergistically develop technologies that are of interest to the NIF Directorate but outside the scope of the NIF funding. The primary objectives of LS&T activities in 2002 have been fourfold--(a) to support deployment of hardware and to enhance laser and optics performance for NIF, (b) to develop high-energy petawatt laser science and technology for the Department of Energy (DOE), (c) to develop advanced solid-state laser systems and optical components for the Department of Defense (DoD), and to invent develop, and deliver improved concepts and hardware for other government agencies and industry. Special efforts have been devoted to building and maintaining our capabilities in three technology areas: high-power short-pulse solid-state lasers, high-power optical materials, and applications of advanced lasers. LS&T activities during 2002 focused on seven major areas: (1) NIF Project--LS&T led major advances in the deployment of NIF Final Optics Assembly (FOA) and the development of 3{omega} optics processing and treatment technologies to enhance NIF's operations and performance capabilities. (2) Stockpile Stewardship Program (SSP)--LS&T personnel continued development of ultrashort-pulse lasers and high-power, large-aperture optics for applications in SSP, extreme-field science and national defense. To enhance the high-energy petawatt (HEPW) capability in NIF, LS&T continued development of advanced compressor-grating and front-end laser technologies utilizing optical-parametric chirped-pulse amplification (OPCPA). (3) High-energy-density physics and inertial fusion energy

  14. Fiscal 1999 engineer exchange project (field of coal mining technology), international exchange project. Domestic workshop; 1999 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kokunai workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The domestic workshop invites Japanese engineers and engineers from coal producing countries for the exchange of coal mining technologies and aims to substantiate and facilitate the dispatching and receiving of engineers under training programs. The main subject of the Asia-Pacific coal technology workshop was 'Coal for the 21st century - resources and technology,' and there were two sessions held on September 8, titled 'Trends and tasks of coal resources exploitation' and 'Coal resources and production technology.' Lectures were delivered by five overseas and five Japanese coal engineering experts. On September 9, nine essays were presented concerning 'Coal resources and security problems' and 'Coal resources and environmental problems.' In addition, a panel discussion was held, titled 'Coal resources assessment and technology.' Importance was emphasized of the correct assessment of the magnitude of resources, development of probing technologies to collect more detailed information, improvement of digging speeds applicable to faces for large and high-efficiency mining, development of coal mining technologies for increased recovery, etc. Information was exchanged on various occasions and partnership was enhanced between the participants to the advantage of engineer exchanging projects in the future. (NEDO)

  15. Microscale chemistry technology exchange at Argonne National Laboratory - east.

    Energy Technology Data Exchange (ETDEWEB)

    Pausma, R.

    1998-06-04

    The Division of Educational Programs (DEP) at Argonne National Laboratory-East interacts with the education community at all levels to improve science and mathematics education and to provide resources to instructors of science and mathematics. DEP conducts a wide range of educational programs and has established an enormous audience of teachers, both in the Chicago area and nationally. DEP has brought microscale chemistry to the attention of this huge audience. This effort has been supported by the U.S. Department of Energy through the Environmental Management Operations organization within Argonne. Microscale chemistry is a teaching methodology wherein laboratory chemistry training is provided to students while utilizing very small amounts of reagents and correspondingly small apparatus. The techniques enable a school to reduce significantly the cost of reagents, the cost of waste disposal and the dangers associated with the manipulation of chemicals. The cost reductions are achieved while still providing the students with the hands-on laboratory experience that is vital to students who might choose to pursue careers in the sciences. Many universities and colleges have already begun to switch from macroscale to microscale chemistry in their educational laboratories. The introduction of these techniques at the secondary education level will lead to freshman being better prepared for the type of experimentation that they will encounter in college.

  16. Advanced Heat/Mass Exchanger Technology for Geothermal and Solar Renewable Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Greiner, Miles [Univ. of Nevada, Reno, NV (United States); Childress, Amy [Univ. of Nevada, Reno, NV (United States); Hiibel, Sage [Univ. of Nevada, Reno, NV (United States); Kim, Kwang [Univ. of Nevada, Reno, NV (United States); Park, Chanwoo [Univ. of Nevada, Reno, NV (United States); Wirtz, Richard [Univ. of Nevada, Reno, NV (United States)

    2014-12-16

    Northern Nevada has abundant geothermal and solar energy resources, and these renewable energy sources provide an ample opportunity to produce economically viable power. Heat/mass exchangers are essential components to any energy conversion system. Improvements in the heat/mass exchange process will lead to smaller, less costly (more efficient) systems. There is an emerging heat transfer technology, based on micro/nano/molecular-scale surface science that can be applied to heat/mass exchanger design. The objective is to develop and characterize unique coating materials, surface configurations and membranes capable of accommodating a 10-fold increase in heat/mass exchanger performance via phase change processes (boiling, condensation, etc.) and single phase convective heat/mass transfer.

  17. Frameworks and technologies for exchanging and sharing product life cycle knowledge

    NARCIS (Netherlands)

    Gerritsen, B.; Gielingh, W.; Dankwort, W.; Anderl, R.

    2011-01-01

    Frameworks and technologies for exchanging and sharing product life cycle knowledge (PLK) are discussed. A life cycle-centric knowledge management approach with stakeholders-in-the-loop allows for a life-long evaluation of the instantaneous performance and the consequential decision making about the

  18. Frameworks and technologies for exchanging and sharing product life cycle knowledge

    NARCIS (Netherlands)

    Gerritsen, B.; Gielingh, W.; Dankwort, W.; Anderl, R.

    2011-01-01

    Frameworks and technologies for exchanging and sharing product life cycle knowledge (PLK) are discussed. A life cycle-centric knowledge management approach with stakeholders-in-the-loop allows for a life-long evaluation of the instantaneous performance and the consequential decision making about the

  19. Mapping Knowledge Exchange in Early Modern Europe : Intellectual and Technological Geographies and Network Representations

    NARCIS (Netherlands)

    van den Heuvel, C.M.J.M.

    2015-01-01

    This paper discusses the development of digital intellectual and technological geographies showing spatial distributions of information and proposes to combine these with network representations of actors and documents relevant for the history knowledge exchange in Early Modern Europe. The amount of

  20. CIVITAS: An International Civic Education Exchange Program. Evaluation Report.

    Science.gov (United States)

    Cabello, Beverly

    This evaluation report documents the CIVITAS program's progress toward its five stated goals: (1) acquaint educators from Eastern and Central Europe with exemplary curricular and teacher training programs in civic education developed in the United States; (2) assist educators from Eastern and Central Europe in adapting and implementing effective…

  1. 2012 DOE Vehicle Technologies Program Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-10-26

    The 2012 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting was held May 14-18, 2012 in Crystal City, Virginia. The review encompassed all of the work done by the Hydrogen Program and the Vehicle Technologies Program: a total of 309 individual activities were reviewed for Vehicle Technologies, by a total of 189 reviewers. A total of 1,473 individual review responses were received for the technical reviews.

  2. Physics of the Cosmos Program Annual Technology Report

    Science.gov (United States)

    Pham, Bruce Thai; Cardiff, Ann H.

    2015-01-01

    What's in this Report? What's New? This fifth Program Annual Technology Report (PATR) summarizes the Programs technology development activities for fiscal year (FY) 2015. The PATR serves four purposes.1. Summarize the technology gaps identified by the astrophysics community;2. Present the results of this years technology gap prioritization by the PCOS Technology Management Board (TMB);3. Report on newly funded PCOS Strategic Astrophysics Technology (SAT) projects; and4. Detail progress, current status, and activities planned for the coming year for all technologies supported by PCOS Supporting Research and Technology (SRT) funding in FY 2015. .

  3. Computer technology and computer programming research and strategies

    CERN Document Server

    Antonakos, James L

    2011-01-01

    Covering a broad range of new topics in computer technology and programming, this volume discusses encryption techniques, SQL generation, Web 2.0 technologies, and visual sensor networks. It also examines reconfigurable computing, video streaming, animation techniques, and more. Readers will learn about an educational tool and game to help students learn computer programming. The book also explores a new medical technology paradigm centered on wireless technology and cloud computing designed to overcome the problems of increasing health technology costs.

  4. Building Technologies Program Multi-Year Program Plan Research and Development 2008

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-01-01

    Building Technologies Program Multi-Year Program Plan 2008 for research and development, including residential and commercial integration, lighting, HVAC and water heating, envelope, windows, and analysis tools.

  5. The Communications Technology Satellite /CTS/ Program

    Science.gov (United States)

    Evans, W. M.; Davies, N. G.; Hawersaat, W. H.

    1976-01-01

    The purposes of the joint Canadian-U.S. Communications Technology Satellite (CTS) Program are (1) to conduct satellite communication systems experiments using the 12- and 14-GHz bands and low-cost transportable ground terminals, (2) to develop and flight test a power amplifier tube having a greater than 50% efficiency with a saturated power output of 200 W at 12 GHz, (3) to develop and flight test a lightweight extendible solar array with an initial power output greater than 1 kW, and (4) to develop and flight test a 3-axis stabilization system to maintain accurate antenna boresight positioning on a spacecraft with flexible appendages. Brief descriptions of these experiments and of the ground facilities are provided.

  6. The impact of technological improvements on developing financial markets: The case of the Johannesburg Stock Exchange

    Directory of Open Access Journals (Sweden)

    Mehmet F. Dicle

    2013-07-01

    Full Text Available Can a significant technological improvement make an economically justifiable contribution to a financial market's development? The Johannesburg Stock Exchange (JSE incorporated the SETS system from the London Stock Exchange in 2002. It is certain that SETS is a technologically efficient trading system, and it would undoubtedly improve trading in the JSE. We test whether SETS represents a structural break by examining whether there was an increase in the JSE's liquidity, market efficiency and international integration after the introduction of SETS. While SETS is certainly a technological improvement with increased liquidity, it is not a sufficient factor to render it efficient. After the incorporation of SETS, the JSE has become more independent and it now offers better diversification opportunities for international investors.

  7. Software Technology for Adaptable, Reliable Systems (STARS) Technical Program Plan,

    Science.gov (United States)

    1986-08-06

    TPP (8/06186) * SOFTWARE TECHNOLOGY IE c0 FOR r ADAPTABLE, RELIABLE SYSTEMS (STARS) TECHNICAL PROGRAM PLAN 6 AUGUST 1986 DTIC ELECTEri NOV 141986WI...NONE NONE 11. TITLE (Include Security Classification) %. Software Technology for Adaptable, Reliable Systems (STARS) Technical Program Plan 12. PERSONAL...document is the top-level technical program plan for the STARS program. It describes the objectives of the program, the technical approach to achieve

  8. Clean Coal Technology Programs: Completed Projects (Volume 2)

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2003-12-01

    Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  9. 78 FR 28137 - Exchange Visitor Program-Fees and Charges

    Science.gov (United States)

    2013-05-14

    ... fee charged to U.S. corporate entities will increase to $3,982.00 for program designation and... opposition was ``due to the Department's failure to adequately demonstrate its best use of resources and lack... that failure to protect the health and well-being of these foreign nationals and their appropriate...

  10. 77 FR 27593 - Exchange Visitor Program-Summer Work Travel

    Science.gov (United States)

    2012-05-11

    ... vacation areas--in or near beach communities, amusement parks, and campgrounds in the summer and at or..., an amusement park industry association, and individual citizens. The small businesses noted that they... Work Travel Program will proceed for the near future at a level not to exceed 109,000...

  11. 75 FR 60674 - Exchange Visitor Program-Fees and Charges

    Science.gov (United States)

    2010-10-01

    ... administrative processing of requests for designation, redesignation, and for requests by program participants... Affairs Reform and Restructuring Act of 1998, Public Law 105-277; as well as other statutory enactments... Constitutional prerogatives in conducting foreign affairs. On September 27, 1999, the United States Information...

  12. Comparison of State-Funded Technology Maturation Programs.

    Energy Technology Data Exchange (ETDEWEB)

    Keller, Elizabeth James Kistin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Warren, Drake [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hess, Marguerite Evelyn [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-12-01

    This study examines the structure and impact of state-funded technology maturation programs that leverage research institutions for economic development throughout the United States. The lessons learned and practices identified from previous experiences will inform Sandia National Laboratories' Government Relations and Technology Partnerships teams as they participate in near-term discussions about the proposed Technology Readiness Gross Receipts Tax Credit and Program, and continue to shape longer-term program and partnership opportunities. This Page Intentionally Left Blank

  13. US country studies program: Support for climate change studies, national plans, and technology assessments

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    This paper describes the objectives of the next phase of the U.S. Country Studies Program which was launched in support of the Framework Convention on Climate Change (FCCC). The next phases of this program aim to: assist countries in preparing Climate Change Action plans; support technology assessments and development of technology initiatives; enhance exchange of information and expertise in support of FCCC. The program offers support for these processes in the form of handbooks which have been published to aid in preparing action plans, and to provide information on methane, forestry, and energy technologies. In addition an array of training workshops have been and are scheduled to offer hands on instruction to participants, expert advice is available from trained personnel, and modeling tools are available to aid in development of action plans.

  14. In Situ Remediation Integrated Program: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    The In Situ Remediation Integrated Program (ISR IP) was instituted out of recognition that in situ remediation could fulfill three important criteria: significant cost reduction of cleanup by eliminating or minimizing excavation, transportation, and disposal of wastes; reduced health impacts on workers and the public by minimizing exposure to wastes during excavation and processing; and remediation of inaccessible sites, including: deep subsurfaces, in, under, and around buildings. Buried waste, contaminated soils and groundwater, and containerized wastes are all candidates for in situ remediation. Contaminants include radioactive wastes, volatile and non-volatile organics, heavy metals, nitrates, and explosive materials. The ISR IP intends to facilitate development of in situ remediation technologies for hazardous, radioactive, and mixed wastes in soils, groundwater, and storage tanks. Near-term focus is on containment of the wastes, with treatment receiving greater effort in future years. ISR IP is an applied research and development program broadly addressing known DOE environmental restoration needs. Analysis of a sample of 334 representative sites by the Office of Environmental Restoration has shown how many sites are amenable to in situ remediation: containment--243 sites; manipulation--244 sites; bioremediation--154 sites; and physical/chemical methods--236 sites. This needs assessment is focused on near-term restoration problems (FY93--FY99). Many other remediations will be required in the next century. The major focus of the ISR EP is on the long term development of permanent solutions to these problems. Current needs for interim actions to protect human health and the environment are also being addressed.

  15. DOE Solar Energy Technologies Program FY 2005 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    2006-03-01

    The DOE Solar Energy Technologies Program FY 2005 Annual Report chronicles the R&D results of the U.S. Department of Energy Solar Energy Technologies Program for Fiscal Year 2005. In particular, the report describes R&D performed by the Program?s national laboratories (National Renewable Energy Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, and Brookhaven National Laboratory) and university and industry partners.

  16. Calorimetry exchange program quarterly data report, 2nd quarter CY93

    Energy Technology Data Exchange (ETDEWEB)

    Barnett, T.M.

    1993-12-31

    The goals of the Calorimetry Sample Exchange Program are to: discuss measurement differences; review and improve analytical measurements and methods; discuss new measurement capabilities; provide data to DOE on measurement capabilities to evaluate shipper-receiver differences; provide characterized or standard materials as necessary for exchange participants; and provide a measurement control program for plutonium analysis. A sample of PuO{sub 2} powder is available at each participating site for NDA measurement, including either or both calorimetry and high-resolution gamma-ray spectroscopy, the elements which are typically combined to provide a calorimetric assay of plutonium. The facilities measure the sample as frequently and to the level of precision which they desire, and then submit the data to the exchange for analysis. The data report includes summary tables for each measurement and charts showing the performance of each laboratory. Comparisons are made to the accepted values for the exchange sample and to data previously reported by that laboratory. This information is presented, in the form of quarterly and annual reports, intended for use by Exchange participants in measurement control programs, or to indicate when bias corrections may be appropriate. No attempt, however, has been made to standardize methods or frequency of data collection, calibration, or operating procedures. Direct comparisons between laboratories may, therefore, be misleading since data have not been collected to the same precision or for the same time periods.

  17. 2013 Building Technologies Office Program Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-11-01

    The 2013 Building Technologies Office Program Peer Review Report summarizes the results of the 2013 Building Technologies Office (BTO) peer review, which was held in Washington, D.C., on April 2–4, 2013. The review was attended by over 300 participants and included presentations on 59 BTO-funded projects: 29 from BTO’s Emerging Technologies Program, 20 from the Commercial Buildings Integration Program, 6 from the Residential Buildings Integration Program, and 4 from the Building Energy Codes Program. This report summarizes the scores and comments provided by the independent reviewers for each project.

  18. Chilean Teachers Begin Exchange Program Visit in Magdalena

    Science.gov (United States)

    2007-01-01

    Two teachers from the town of San Pedro de Atacama, in the northern desert of the South American nation of Chile, arrive in Magdalena, New Mexico, Sunday, January 28, for a two-week visit that is part of a Sister Cities program sponsored by Associated Universities, Inc. (AUI), the nonprofit research corporation that operates the National Radio Astronomy Observatory (NRAO). They will be accompanied by their town's mayor. Myriam Nancy Rivera Mercado, Head of the high school in San Pedro, Gabriela Fernanda Rodriguez Moraleda, a tourism teacher there, and San Pedro Mayor Sandra Berna Martinez will begin a visit that includes classroom observations in the Magdalena schools, a reception hosted by the Magdalena Village Council, and a Mayor's Breakfast with Magdalena Mayor Jim Wolfe. They also will meet local residents, tour the Bosque del Apache National Wildlife Refuge with a second-grade class, visit an area ranch, tour the Very Large Array (VLA) radio telescope, and see Socorro's Community Arts Party. "These teachers will learn much about New Mexico, the United States, and our educational system, and will take this new knowledge back to their students and their community," said NRAO Education Officer Robyn Harrison. The visit is part of a Sister Cities program initiated and funded by AUI, which operates the NRAO for the U.S. National Science Foundation. Radio astronomy is a common link between San Pedro de Atacama and Magdalena. San Pedro is near the site of the Atacama Large Millimeter/submillimeter Array (ALMA), an international telescope project now under construction with funding by major partners in North America, Europe, and Japan. Magdalena is near the site of NRAO's VLA radio telescope. In Magdalena, the Village Council and Mayor Wolfe formalized their participation in the Sister Cities program last September, and San Pedro ratified the program in December. In San Pedro, the ceremony ratifying the agreement was attended by U.S. Ambassador to Chile Craig K

  19. Evaluation of the Advanced Subsonic Technology Program Noise Reduction Benefits

    Science.gov (United States)

    Golub, Robert A.; Rawls, John W., Jr.; Russell, James W.

    2005-01-01

    This report presents a detailed evaluation of the aircraft noise reduction technology concepts developed during the course of the NASA/FAA Advanced Subsonic Technology (AST) Noise Reduction Program. In 1992, NASA and the FAA initiated a cosponsored, multi-year program with the U.S. aircraft industry focused on achieving significant advances in aircraft noise reduction. The program achieved success through a systematic development and validation of noise reduction technology. Using the NASA Aircraft Noise Prediction Program, the noise reduction benefit of the technologies that reached a NASA technology readiness level of 5 or 6 were applied to each of four classes of aircraft which included a large four engine aircraft, a large twin engine aircraft, a small twin engine aircraft and a business jet. Total aircraft noise reductions resulting from the implementation of the appropriate technologies for each class of aircraft are presented and compared to the AST program goals.

  20. NASA technology utilization program: The small business market

    Science.gov (United States)

    Vannoy, J. K.; Garcia-Otero, F.; Johnson, F. D.; Staskin, E.

    1980-01-01

    Technology transfer programs were studied to determine how they might be more useful to the small business community. The status, needs, and technology use patterns of small firms are reported. Small business problems and failures are considered. Innovation, capitalization, R and D, and market share problems are discussed. Pocket, captive, and new markets are summarized. Small manufacturers and technology acquisition are discussed, covering external and internal sources, and NASA technology. Small business and the technology utilization program are discussed, covering publications and industrial applications centers. Observations and recommendations include small business market development and contracting, and NASA management technology.

  1. Near-Net Forging Technology Demonstration Program

    Science.gov (United States)

    Hall, I. Keith

    1996-01-01

    Significant advantages in specific mechanical properties, when compared to conventional aluminum (Al) alloys, make aluminum-lithium (Al-Li) alloys attractive candidate materials for use in cryogenic propellant tanks and dry bay structures. However, the cost of Al-Li alloys is typically five times that of 2219 aluminum. If conventional fabrication processes are employed to fabricate launch vehicle structure, the material costs will restrict their utilization. In order to fully exploit the potential cost and performance benefits of Al-Li alloys, it is necessary that near-net manufacturing methods be developed to off-set or reduce raw material costs. Near-net forging is an advanced manufacturing method that uses elevated temperature metal movement (forging) to fabricate a single piece, near-net shape, structure. This process is termed 'near-net' because only a minimal amount of post-forge machining is required. The near-net forging process was developed to reduce the material scrap rate (buy-to-fly ratio) and fabrication costs associated with conventional manufacturing methods. The goal for the near-net forging process, when mature, is to achieve an overall cost reduction of approximately 50 percent compared with conventional manufacturing options for producing structures fabricated from Al-Li alloys. This NASA Marshall Space Flight Center (MSFC) sponsored program has been a part of a unique government / industry partnership, coordinated to develop and demonstrate near-net forging technology. The objective of this program was to demonstrate scale-up of the near-net forging process. This objective was successfully achieved by fabricating four integrally stiffened, 170- inch diameter by 20-inch tall, Al-Li alloy 2195, Y-ring adapters. Initially, two 2195 Al-Li ingots were converted and back extruded to produce four cylindrical blockers. Conventional ring rolling of the blockers was performed to produce ring preforms, which were then contour ring rolled to produce

  2. Technology Development Roadmap for the Advanced High Temperature Reactor Secondary Heat Exchanger

    Energy Technology Data Exchange (ETDEWEB)

    P. Sabharwall; M. McCllar; A. Siahpush; D. Clark; M. Patterson; J. Collins

    2012-09-01

    This Technology Development Roadmap (TDRM) presents the path forward for deploying large-scale molten salt secondary heat exchangers (MS-SHX) and recognizing the benefits of using molten salt as the heat transport medium for advanced high temperature reactors (AHTR). This TDRM will aid in the development and selection of the required heat exchanger for: power production (the first anticipated process heat application), hydrogen production, steam methane reforming, methanol to gasoline production, or ammonia production. This TDRM (a) establishes the current state of molten salt SHX technology readiness, (b) defines a path forward that systematically and effectively tests this technology to overcome areas of uncertainty, (c) demonstrates the achievement of an appropriate level of maturity prior to construction and plant operation, and (d) identifies issues and prioritizes future work for maturing the state of SHX technology. This study discusses the results of a preliminary design analysis of the SHX and explains the evaluation and selection methodology. An important engineering challenge will be to prevent the molten salt from freezing during normal and off-normal operations because of its high melting temperature (390°C for KF ZrF4). The efficient transfer of energy for industrial applications depends on the ability to incorporate cost-effective heat exchangers between the nuclear heat transport system and industrial process heat transport system. The need for efficiency, compactness, and safety challenge the capabilities of existing heat exchanger technology. The description of potential heat exchanger configurations or designs (such as printed circuit, spiral or helical coiled, ceramic, plate and fin, and plate type) were covered in an earlier report (Sabharwall et al. 2011). Significant future work, much of which is suggested in this report, is needed before the benefits and full potential of the AHTR can be realized. The execution of this TDRM will focuses

  3. THE EFFECT OF ERASMUS EXCHANGE PROGRAM ON ATTITUDES TOWARDS LEARNING ENGLISH FOREIGN LANGUAGE

    Directory of Open Access Journals (Sweden)

    Aylin GÜRLEK

    2016-04-01

    Full Text Available As a result of globalization the societies have got closer and there has occurred a link between countries and cultures in terms of trade, immigration and the exchange of information and ideas. Erasmus Exchange Program is another way of sharing cultures and information. Erasmus Exchange Program has paved the way for participants to think in different dimensions. Culture and language may be preferred as the selection of these dimensions. In this sense, sharing culture plays a major role among the objectives of Erasmus Program. In addition, culture may be represented with the use of EFL among the advantages of this program. Gardner (1985 states that the attitudes are important elements of learning process and suggests that the more positive attitudes a learner develop, the more achievement s/he gets during learning process. The study of Jenkins (2009 revealed that Erasmus Exchange Program helps participants to develop an appreciation towards the idea of being a non-native speaker of English in a multicultural environment. Put another way, English plays another major role and in this study the ultimate purpose has been determined to indicate changes in the attitudes of Erasmus Students at Kahramanmaraş Sütçü İmam University in Turkey towards learning EFL after Erasmus Exchange Program. 18 items in a questionnaire and a semi-structured interview have been conducted within the study. There are 65 participants in this study who studied in different European countries during an educational period. The results of the study indicate that living and studying in a multicultural environment either strengthened their already positive attitudes towards learning EFL or helped the participants to develop positive attitudes.

  4. Technological aspects of vegetable oils epoxidation in the presence of ion exchange resins: a review

    Directory of Open Access Journals (Sweden)

    Milchert Eugeniusz

    2016-09-01

    Full Text Available A review paper of the technology basics of vegetable oils epoxidation by means of peracetic or performic acid in the presence of acidic ion exchange resins has been presented. The influence of the following parameters: temperature, molar ratio of acetic acid and hydrogen peroxide to ethylenic unsaturation, catalyst loading, stirring intensity and the reaction time on a conversion of ethylenic unsaturation, the relative percentage conversion to oxirane and the iodine number was discussed. Optimal technological parameters, mechanism of epoxidation by carboxylic peracids and the possibilities of catalyst recycling have been also discussed. This review paper shows the application of epoxidized oils.

  5. The Inside-Out Prison Exchange Program: The Impact of Structure, Content, and Readings

    Science.gov (United States)

    Allred, Sarah L.

    2009-01-01

    This study examines qualitative and quantitative data from a fifteen-week experiential course held in a county jail. The course was modeled after the Inside-Out Prison Exchange Program, and included college students and people who were incarcerated at the time. Survey data and comments gleaned from student papers were used to assess the impact of…

  6. 78 FR 6275 - Medicaid, Children's Health Insurance Programs, and Exchanges: Essential Health Benefits in...

    Science.gov (United States)

    2013-01-30

    ... 457 Office of the Secretary 45 CFR Part 155 RIN 0938-AR04 Medicaid, Children's Health Insurance... Federal Register entitled ``Medicaid, Children's Health Insurance Programs, and Exchanges: Essential... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND...

  7. 75 FR 66413 - 30-Day Notice of Proposed Information Collection: Exchange Programs Alumni Web Site Registration...

    Science.gov (United States)

    2010-10-28

    ... website, alumni.state.gov . Additional Information The registration form is dynamic, presenting certain... Information Collection: Exchange Programs Alumni Website Registration. OMB Control Number: None. Type of... contact information, which is required for website registration, all other information is provided on...

  8. 76 FR 10038 - Determination That a Demonstration Needle Exchange Program Would be Effective in Reducing Drug...

    Science.gov (United States)

    2011-02-23

    ... HUMAN SERVICES Determination That a Demonstration Needle Exchange Program Would be Effective in Reducing... agent for acquired immune deficiency syndrome. This determination reflects the scientific evidence supporting the important public health benefit of SSPs, and is necessary to meet the statutory...

  9. 48 CFR 1446.170 - Government-Industry Data Exchange Program (GIDEP).

    Science.gov (United States)

    2010-10-01

    ... construction materials), manufacturing processes, environmental issues associated with those manufacturing processes, recycling and waste prevention. (b) The GIDEP is managed for the U.S. Government by the... cooperative program managed and funded by the U.S. Government to exchange engineering, failure experience...

  10. Educational Programs for Graduate Level Learners and Professionals - National Radio Astronomy Observatory National and International Non-Traditional Exchange Program

    Science.gov (United States)

    Wingate, Lory Mitchell

    2017-01-01

    The National Radio Astronomy Observatory’s (NRAO) National and International Non-Traditional Exchange (NINE) Program teaches concepts of project management and systems engineering to chosen participants within a nine-week program held at NRAO in New Mexico. Participants are typically graduate level students or professionals. Participation in the NINE Program is through a competitive process. The program includes a hands-on service project designed to increase the participants knowledge of radio astronomy. The approach demonstrate clearly to the learner the positive net effects of following methodical approaches to achieving optimal science results.The NINE teaches participants important sustainable skills associated with constructing, operating and maintaining radio astronomy observatories. NINE Program learners are expected to return to their host sites and implement the program in their own location as a NINE Hub. This requires forming a committed relationship (through a formal Letter of Agreement), establishing a site location, and developing a program that takes into consideration the needs of the community they represent. The anticipated outcome of this program is worldwide partnerships with fast growing radio astronomy communities designed to facilitate the exchange of staff and the mentoring of under-represented groups of learners, thereby developing a strong pipeline of global talent to construct, operate and maintain radio astronomy observatories.

  11. Joint research and development and exchange of technology on toxic material emergency response between LLNL and ENEA. 1985 progress report

    Energy Technology Data Exchange (ETDEWEB)

    Dickerson, M.H.; Caracciolo, R.

    1986-01-31

    For the past six years, the US Department of Energy, LLNL, and the ENEA, Rome, Italy, have participated in cooperative studies for improving a systems approach to an emergency response following nuclear accidents. Technology exchange between LLNL and the ENEA was initially confined to the development, application, and evaluation of atmospheric transport and diffusion models. With the emergence of compatible hardware configurations between LLNL and ENEA, exchanges of technology and ideas for improving the development and implementation of systems are beginning to emerge. This report describes cooperative work that has occurred during the past three years, the present state of each system, and recommendations for future exchanges of technology.

  12. Extension Youth Educators' Technology Use in Youth Development Programming

    Science.gov (United States)

    McClure, Carli; Buquoi, Brittany; Kotrlik, Joe W.; Machtmes, Krisanna; Bunch, J. C.

    2014-01-01

    The purpose of this descriptive-correlational study was to determine the use of technology in youth programming by Extension youth development educators in Louisiana, Mississippi, and Tennessee. Data were collected via e-mail and a SurveyMonkey© questionnaire. Extension educators are using some technology in youth development programming. More…

  13. Status of NASA's Earth-to-Orbit Propulsion Technology program

    Science.gov (United States)

    Escher, W. J. D.; Moses, J. L.; Gorland, S. H.; Stephenson, F. W.

    1991-01-01

    Earth-to-Orbit Propulsion Technology program is considered. The program's three major technical areas include combustion devices, turbomachinery, and controls and monitoring. Directed toward reducing acquisition and operations risk and cost the ETO program is conducted in two serially-performed categories: technology acquisition and technology validation. The former is constituted of studies, tool building, and bench-scale experimentation. The latter involves next-step verification of the acquisition results and findings, usually leading to a test-bed validated technology 'product'.

  14. The Beamed Energy Technology Working Group, Programs and Goals

    Science.gov (United States)

    Montgomery, Edward E., IV; Smith, W. Scott (Technical Monitor)

    2002-01-01

    A brief description of the Beamed Energy Technology Program will be given. Its relationship to the overall Advanced Technology Program at Marshall Space Flight Center will be discussed. A summary description of the known potential benefits and technical issues remaining in the development of a viable system will be presented along with program plans for a NASA Research Announcement in FY03 to begin development of relevant technologies and systems concepts. The results of workshop activity by the Beamed Energy Technology Working Group will be provided.

  15. Part 2 -- current program integrating strategies and lubrication technology

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, B.

    1996-12-01

    This paper is the second of two that describe the Predictive Maintenance Program for rotating machinery at the Palo Verde Nuclear Generating Station. The Predictive Maintenance program has been enhanced through organizational changes and improved interdisciplinary usage of technology. This paper will discuss current program strategies that have improved the interaction between the Vibration and Lube Oil programs. The {open_quotes}Lube Oil{close_quotes} view of the combined program along with case studies will then be presented.

  16. U.S.-MEXICO TECHNOLOGY TRANSFER; BILATERAL TECHNICAL EXCHANGES FOR SUSTAINABLE ECONOMIC GROWTH IN THE BORDER REGION

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez, Richard, D., Dr.

    2007-10-01

    The U.S. Department of Energy (DOE) maintains a strong commitment to transfer the results of its science and technology programs to the private sector. The intent is to apply innovative and sometimes advanced technologies to address needs while simultaneously stimulating new commercial business opportunities. Such focused “technology transfer” was evident in the late 1990s as the results of DOE investments in environmental management technology development led to new tools for characterizing and remediating contaminated sites as well as handling and minimizing the generation of hazardous wastes. The Department’s Office of Environmental Management was attempting to reduce the cost, accelerate the schedule, and improve the efficacy of clean-up efforts in the nuclear weapons complex. It recognized that resulting technologies had broader world market applications and that their commercialization would further reduce costs and facilitate deployment of improved technology at DOE sites. DOE’s Albuquerque Operations Office (now part of the National Nuclear Security Administration) began in 1995 to build the foundation for a technology exchange program with Mexico. Initial sponsorship for this work was provided by the Department’s Office of Environmental Management. As part of this effort, Applied Sciences Laboratory, Inc. (ASL) was contracted by the DOE Albuquerque office to identify Mexico’s priority environmental management needs, identify and evaluate DOE-sponsored technologies as potential solutions for those needs, and coordinate these opportunities with decision makers from Mexico’s federal government. That work led to an improved understanding of many key environmental challenges that Mexico faces and the many opportunities to apply DOE’s technologies to help resolve them. The above results constituted, in large part, the foundation for an initial DOE-funded program to apply the Department’s technology base to help address some of Mexico

  17. Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2010-08-01

    This report identifies the commercial and near-commercial (emerging) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies Program in the Office of Energy Efficiency and Renewable Energy.

  18. 48 CFR 235.006-70 - Manufacturing Technology Program.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Manufacturing Technology... CONTRACTING 235.006-70 Manufacturing Technology Program. In accordance with 10 U.S.C. 2521(d), for acquisitions under the Manufacturing Technology Program— (a) Award all contracts using competitive...

  19. Computing, Information, and Communications Technology (CICT) Program Overview

    Science.gov (United States)

    VanDalsem, William R.

    2003-01-01

    The Computing, Information and Communications Technology (CICT) Program's goal is to enable NASA's Scientific Research, Space Exploration, and Aerospace Technology Missions with greater mission assurance, for less cost, with increased science return through the development and use of advanced computing, information and communication technologies

  20. A framework for evaluation of technology transfer programs. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    The objective of this volume is to describe a framework with which DOE can develop a program specific methodology to evaluate it`s technology transfer efforts. This approach could also be applied to an integrated private sector technology transfer organization. Several benefits will be realized from the application of this work. While the immediate effect will be to assist program managers in evaluating and improving program performance, the ultimate benefits will accrue to the producing industry, the states, and the nation in the form of sustained or increased domestic oil production. This benefit depends also, of course, on the effectiveness of the technology being transferred. The managers of the Technology Transfer program, and the larger federal oil and gas R&D programs, will be provided with a means to design and assess the effectiveness of program efforts as they are developed, tested and performed. The framework allows deficiencies in critical aspects of the program to be quickly identified, allowing for timely corrections and improvements. The actual process of developing the evaluation also gives the staff of the Oil R&D Program or Technology Transfer subprogram the opportunity to become oriented to the overall program goals. The structure and focus imposed by the evaluation paradigm will guide program staff in selecting activities which are consistent with achieving the goals of the overall R&D program.

  1. DOE Solar Energy Technologies Program FY 2006 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    2007-07-01

    The DOE Solar Energy Technologies Program FY 2006 Annual Report chronicles the R&D results of the U.S. Department of Energy Solar Energy Technologies Program for Fiscal Year 2005. In particular, the report describes R&D performed by the Program's national laboratories (National Renewable Energy Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, and Brookhaven National Laboratory) and university and industry partners.

  2. DOE Solar Energy Technologies Program 2007 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    2008-07-01

    The DOE Solar Energy Technologies Program FY 2007 Annual Report chronicles the R&D results of the U.S. Department of Energy Solar Energy Technologies Program from October 2006 to September 2007. In particular, the report describes R&D performed by the Program's national laboratories (National Renewable Energy Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, and Brookhaven National Laboratory) and university and industry partners.

  3. DOE Solar Energy Technologies Program: FY 2004 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    2005-10-01

    The DOE Solar Energy Technologies Program FY 2004 Annual Report chronicles the R&D results of the U.S. Department of Energy Solar Energy Technologies Program for Fiscal Year 2004. In particular, the report describes R&D performed by the Program's national laboratories (National Renewable Energy Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, and Brookhaven National Laboratory) and university and industry partners.

  4. Two Inseparable Facets of Technology Integration Programs: Technology and Theoretical Framework

    Science.gov (United States)

    Demir, Servet

    2011-01-01

    This paper considers the process of program development aiming at technology integration for teachers. For this consideration, the paper focused on an integration program which was recently developed as part of a larger project. The participants of this program were 45 in-service teachers. The program continued four weeks and the conduct of the…

  5. Two Inseparable Facets of Technology Integration Programs: Technology and Theoretical Framework

    Science.gov (United States)

    Demir, Servet

    2011-01-01

    This paper considers the process of program development aiming at technology integration for teachers. For this consideration, the paper focused on an integration program which was recently developed as part of a larger project. The participants of this program were 45 in-service teachers. The program continued four weeks and the conduct of the…

  6. A Contemporary Preservice Technology Education Program

    Science.gov (United States)

    Flanigan, Rod; Becker, Kurt; Stewardson, Gary

    2012-01-01

    In order to teach engineering education, today's engineering and technology education teachers must be equipped with lesson plans to teach engineering design, among other principles, to the 6th-12th grade levels. At Utah State University (USU), curriculum has been developed for preservice engineering and technology education teachers that…

  7. ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM CASE STUDIES: DEMONSTRATING PROGRAM OUTCOMES, VOLUME II

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This bookle...

  8. U.S.-MEXICO TECHNOLOGY TRANSFER; BILATERAL TECHNICAL EXCHANGES FOR SUSTAINABLE ECONOMIC GROWTH IN THE BORDER REGION

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez, Richard, D., Dr.

    2007-10-01

    The U.S. Department of Energy (DOE) maintains a strong commitment to transfer the results of its science and technology programs to the private sector. The intent is to apply innovative and sometimes advanced technologies to address needs while simultaneously stimulating new commercial business opportunities. Such focused “technology transfer” was evident in the late 1990s as the results of DOE investments in environmental management technology development led to new tools for characterizing and remediating contaminated sites as well as handling and minimizing the generation of hazardous wastes. The Department’s Office of Environmental Management was attempting to reduce the cost, accelerate the schedule, and improve the efficacy of clean-up efforts in the nuclear weapons complex. It recognized that resulting technologies had broader world market applications and that their commercialization would further reduce costs and facilitate deployment of improved technology at DOE sites. DOE’s Albuquerque Operations Office (now part of the National Nuclear Security Administration) began in 1995 to build the foundation for a technology exchange program with Mexico. Initial sponsorship for this work was provided by the Department’s Office of Environmental Management. As part of this effort, Applied Sciences Laboratory, Inc. (ASL) was contracted by the DOE Albuquerque office to identify Mexico’s priority environmental management needs, identify and evaluate DOE-sponsored technologies as potential solutions for those needs, and coordinate these opportunities with decision makers from Mexico’s federal government. That work led to an improved understanding of many key environmental challenges that Mexico faces and the many opportunities to apply DOE’s technologies to help resolve them. The above results constituted, in large part, the foundation for an initial DOE-funded program to apply the Department’s technology base to help address some of Mexico

  9. R-Technology of Programming:Basic Notions and Implementation

    Institute of Scientific and Technical Information of China (English)

    1992-01-01

    This paper presents a kind of visual programming,which is called R-technology of programming,The R-technology is independent of any programming language or operating system and the R-chart is in accord with international standard(ISO 8631H).The package of R-technology has been applied to the high level languages such as PASCAL.C,ASSEMBLER,FORTRAN,PL/1,MODULA-2 and RTRAN,This package is applied to computers ranging from mainframes(IBM370) and minis(VAX) to micros(IBM/PC).

  10. HTGR generic technology program. Semiannual report ending March 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-05-01

    This document reports the technical accomplishments on the HTGR Generic Technology Program at General Atomic during the first half of FY-80. It covers a period when the design direction of the National HTGR Program is in the process of an overall review. The HTGR Generic Technology Program activities have continued so as to provide the basic technology required for all HTGR applications. The activities include the need to develop an MEU fuel and the need to qualify materials and components for the higher temperatures of the gas turbine and process heat plants.

  11. Native American Training Program in Petroleum Technology

    Energy Technology Data Exchange (ETDEWEB)

    Ho, Winifred M.; Kokesh, Judith H.

    1999-04-27

    This report outlines a comprehensive training program for members of Native American tribes whose lands have oil and gas resources. The program has two components: short courses and internships. Programs are proposed for: (1) adult tribes representatives who are responsible for managing tribal mineral holdings, setting policy, or who work in the oil and gas industry; (2) graduate and undergraduate college students who are tribal members and are studying in the appropriate fields; and (3) high school and middle school teachers, science teachers. Materials and program models already have been developed for some components of the projects. The plan is a coordinated, comprehensive effort to use existing resources to accomplish its goals. Partnerships will be established with the tribes, the BIA, tribal organizations, other government agencies, and the private sector to implement the program.

  12. Advances in processing technologies for titanium heat exchanger tubes of fossil and nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Likhareva, T.P.; Tchizhik, A.A.; Chavchanidze, N.N. [Polzanov Central Boiler and Turbine Institute, St. Petersburg (Russian Federation)

    1998-12-31

    The advances in processing technologies for titanium heat exchangers with rolled and welded tubes of fossil and nuclear power plants in Russia are presented. The special methodology of investigations with constant small strain rate have been used to study the effects of mixed corrosion and creep processes in condensers cooled by sea or synthetic sea waters. The results of corrosion creep tests and K1scc calculations are given. The Russian science activities concerning condensers manufactured from titanium show the possibilities for designing structures with very high level service reliability in different corrosion aggressive mediums with high total salt, Cl-ion and oxygen contents. (orig.)

  13. Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program - 2012

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-09-01

    This FY 2012 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  14. Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2011-09-01

    This FY 2011 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  15. A Widely-Accessible Distributed MEMS Processing Environment. The MEMS Exchange Program

    Science.gov (United States)

    2012-10-29

    adequate to cover the costs of running the service. We take lessons from the very successful MOSIS program that was supported by DARPA and which began...over twenty years ago. Many technology experts agree that the MOSIS program has been one of the most important and successful programs in DARPA’s...history. MOSIS has provided training to countless graduate students in IC design, provided support to many silicon-valley startups that have become

  16. Marine Language Exchange Program: A 21st Century International and Interdisciplinary Partnership

    Science.gov (United States)

    Robigou, V.; Nichols-Pecceu, M.

    2001-12-01

    The ability of scientists to communicate across cultural and linguistic barriers is crucial for the global economic sustainability and protection of the world\\'{}s oceans. Yet students with majors in the sciences and engineering constitute less than 2% of those who study abroad each year. And even rarer are students who study in countries where English is not the first language. The Marine Language Exchange program is a case study of an international and interdisciplinary collaboration between faculties in the languages and the sciences who address this gap. A consortium of U.S. and European institutions including Eckerd College (Florida), University of Washington (Washington), University of Hilo (Hawaii), Université de la Rochelle (France), Université de Liège (Belgium), and Universidad de Las Palmas (Spain) is developing a multilingual, marine sciences exchange program in an effort to internationalize their Marine Sciences departments. The program includes a three-week, intensive "bridge" course designed to reinforce second language skills in the context of marine sciences, and prepare undergraduate students for the cultural and educational differences of their host country. Following this immersion experience students from each institution enroll in courses abroad including marine sciences specialization for full academic credit. This session will review the Marine Language Exchange program activities since 2000 and will discuss the ideological and practical aspects of the program. The program successes, difficulties and future directions will also be presented. Different disciplinary approaches -Second Language Acquisition, English as a Second Language and Marine Science- prepare science students to contribute to the study and the management of the world\\'{}s oceans with an awareness of the cultural issues reflected by national marine policies. Based on this case study, other universities could initiate their own international and interdisciplinary

  17. Solar Energy Technologies Program Newsletter - First Quarter 2010

    Energy Technology Data Exchange (ETDEWEB)

    None

    2010-04-22

    The first quarter 2010 edition of the Solar Energy Technologies Program newsletter summarizes the activities for the past three months, funding opportunities, highlights from the national labs, and upcoming events.

  18. Solar Energy Technologies Program Newsletter - Fourth Quarter 2009

    Energy Technology Data Exchange (ETDEWEB)

    DOE Solar Energy Technologies Program

    2009-12-31

    The Fourth Quarter 2009 edition of the Solar Energy Technologies Program newsletter summarizes the activities for the past three months, funding opportunities, highlights from the national labs, and upcoming events.

  19. Design of Heat Exchanger Network for VCM Distillation Unit Using Pinch Technology

    Directory of Open Access Journals (Sweden)

    VISHAL G. BOKAN

    2015-06-01

    Full Text Available In process industries, heat exchanger networks represent an important part of the plant structure. The purpose of the networks is to maximize heat recovery, thereby lowering the overall plant costs. In process industries, during operation of any heat exchanger network (HEN, the major aim is to focus on the best performance of the network As in present condition of fuel crises is one of the major problem faced by many country & industrial utility is majorly depend on this. There is technique called process integration which is used for integrate heat within loop so optimize the given process and minimize the heating load and cooling load .In the present study of heat integration on VCM (vinyl chloride monomer distillation unit, Heat exchanger network (HEN is designed by using Aspen energy analyzer V8.0 software. This software implements a methodology for HEN synthesis with the use of pinch technology. Several heat integration networks are designed with different ΔT min and total annualized cost compared to obtain the optimal design. The network with a ΔT min of 90C is the most optimal where the largest energy savings are obtained with the appropriate use of utilities (Save 15.3764% for hot utilities and 47.52% for cold utilities compared with the current plant configuration. Percentage reduction in total operating cost is 18.333%. From calculation Payback Period for new design is 3.15 year. This save could be done through a plant revamp, with the addition of two heat exchangers. This improvement are done in the process associated with this technique are not due to the use of advance unit operation, but to the generation of heat integration scheme. The Pinch Design Method can be employed to give good designs in rapid time and with minimum data.

  20. Compressed air energy storage technology program

    Science.gov (United States)

    Loscutoff, W. V.

    1980-06-01

    Progress in the development of compressed air energy storage (CAES) technologies for central station electric utility applications is reported. It is reported that the concept improves the effectiveness of a gas turbine using petroleum fuels, could reduce petroleum fuel consumption of electric utility peaking plants, and is technically feasible and economically viable. Specific topics discussed include stability criteria for large underground reservoirs in salt domes, hard rock, and porous rock used for air storage in utility applications and second-generation technologies that have minimal or no dependence on petroleum fuels. The latter includes integration of thermal energy storage, fluidized bed combustion, or coal gasification with CAES.

  1. Technology Candidates for Air-to-Air and Air-to-Ground Data Exchange

    Science.gov (United States)

    Haynes, Brian D.

    2015-01-01

    Technology Candidates for Air-to-Air and Air-to-Ground Data Exchange is a two-year research effort to visualize the U. S. aviation industry at a point 50 years in the future, and to define potential communication solutions to meet those future data exchange needs. The research team, led by XCELAR, was tasked with identifying future National Airspace System (NAS) scenarios, determining requirements and functions (including gaps), investigating technical and business issues for air, ground, & air-to-ground interactions, and reporting on the results. The project was conducted under technical direction from NASA and in collaboration with XCELAR's partner, National Institute of Aerospace, and NASA technical representatives. Parallel efforts were initiated to define the information exchange functional needs of the future NAS, and specific communication link technologies to potentially serve those needs. Those efforts converged with the mapping of each identified future NAS function to potential enabling communication solutions; those solutions were then compared with, and ranked relative to, each other on a technical basis in a structured analysis process. The technical solutions emerging from that process were then assessed from a business case perspective to determine their viability from a real-world adoption and deployment standpoint. The results of that analysis produced a proposed set of future solutions and most promising candidate technologies. Gap analyses were conducted at two points in the process, the first examining technical factors, and the second as part of the business case analysis. In each case, no gaps or unmet needs were identified in applying the solutions evaluated to the requirements identified. The future communication solutions identified in the research comprise both specific link technologies and two enabling technologies that apply to most or all specific links. As a result, the research resulted in a new analysis approach, viewing the

  2. Integrating Technology into Teacher Preparation Programs.

    Science.gov (United States)

    Metze, Leroy; Hayes, Mike; Eakles, David; Murley, Tim

    During the spring of 1992, a partnership between Western Kentucky University, Jostens' Learning Corporation, and three school districts was formed for the purpose of developing an implementation model for the integration of technology into teacher education. Following integrated instruction on the university campus and the partnership schools,…

  3. Innovative Rehabilitation Technology Demonstration and Evaluation Program

    Science.gov (United States)

    The needs associated with the aging water infrastructure are immense and have been estimated at more than $1 trillion dollars over the next 20 years for water and wastewater utilities. To meet this growing need, utilities require the use of innovative technologies and procedures...

  4. MUSICAL RADIO: THE TECHNOLOGY OF PROGRAMING

    Directory of Open Access Journals (Sweden)

    Bysko Maxim

    2016-12-01

    Full Text Available The author considers the musical radio broadcasting of the XX-XXI centuries from the point of view of a technical progress. He covers the period from "before tape" era and "tape" era to the modern digital media broadcasting (as example with the Digispot II broadcast automation software. However, despite the significant changes in technics, which are expressed primarily in the extensive use of a computer automation and reduction of programming staff (often up to two or three persons: a program director, a managing editor, a music editor, the principles of the linear broadcasting structure remained identical as a whole. So, the basic structural units here are the program blocks, "clocks", blocks of clock's elements (today, these elements often filled with automated rotation.

  5. Establishing Instructional Technology Benchmarks for Teacher Preparation Programs.

    Science.gov (United States)

    Northrup, Pamela Taylor; Little, Wesley

    1996-01-01

    Examines technology use in teacher preparation, emerging state and national standards for educators and technology, and benchmarks for teacher preparation programs (including faculty preparation), and notes the importance of creating school-business partnerships to help finance this costly venture. (SM)

  6. Toys for Tots in Your Technology and Engineering Program

    Science.gov (United States)

    Berkeihiser, Mike

    2016-01-01

    Most technology and engineering (T&E) classes are elective, so teachers are always looking for ways to market programs, engage students, and remind administrators and school board members about the good things T&E teachers do with and for kids. In this article, the Unionville High School (PA) Technology and Engineering Department describes…

  7. Can object technology meet health care's programming needs?

    Science.gov (United States)

    McCormack, J

    1997-02-01

    Although object technology is just starting to make inroads in programming for health care applications, some observers predict it will drive information systems into the next century and beyond. Objects technology could play a major role in quicker development of the computer-based patient record and in easing the creation of links between systems.

  8. Technological Innovation and Cooperation for Foreign Information Access Program

    Science.gov (United States)

    Office of Postsecondary Education, US Department of Education, 2012

    2012-01-01

    The Technological Innovation and Cooperation for Foreign Information Access (TICFIA) Program supports projects focused on developing innovative technologies for accessing, collecting, organizing, preserving, and disseminating information from foreign sources to address the U.S.' teaching and research needs in international education and foreign…

  9. Inventory of Policy and Program for Instructional Technology.

    Science.gov (United States)

    North Central Association of Colleges and Schools, Chicago, IL. Commission on Research and Service.

    The instructional technology committee of the North Central Association (NCA) of Schools and Colleges has developed a preliminary inventory on policy and program for instructional technology. This inventory is general and qualitative to facilitate its use by the various member institutions. Its purpose is to assist institutional self evaluation,…

  10. 22 CFR Appendix D to Part 62 - Annual Report-Exchange Visitor Program Services (GC/V), Department of State, Washington, DC 20547...

    Science.gov (United States)

    2010-04-01

    ... Relations DEPARTMENT OF STATE PUBLIC DIPLOMACY AND EXCHANGES EXCHANGE VISITOR PROGRAM Pt. 62, App. D... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Annual Report-Exchange Visitor Program Services... ____ (b) PROGRAM EVALUATION On a separate sheet, please provide a brief narrative report on...

  11. Japan Fulbright Memorial Fund Program Opens New Avenues for Effective Technology Integration into Education

    Science.gov (United States)

    Paoletti, Franco; Carlucci, Lisa Marie

    2006-04-01

    Technology is increasingly playing a major role in today's education often integrated into instruction to become one of the teacher's most effective and often indispensable tools used in the classroom. It can be said that the use of technology at the beginning of this new millennium is affecting the instructional process and it is changing some of its basic connotations. The presented work analyzes the impact of various technologies on education emphasizing the advantages provided by a successful integration, the obstacles encountered along the way, and the methodologies currently used in the process. ``Educational exchange can turn nations into people, contributing as no other form of communication can to the humanizing of international relations'' (Senator J.M. Fulbright). Technology of this modern era is providing the indispensable tool to achieve this superior level of communication overcoming historical, cultural, and language barriers. In the context of the Japan Fulbright Memorial Fund (JFMF) Teacher Program, we analyze the impact of technology on educational cross-cultural exchanges to raise awareness and interest of the scientific/educational community on the need of establishing stronger international relations promoting world peace and global prosperity.

  12. 77 FR 46909 - Small Business Innovation Research (SBIR) Program and Small Business Technology Transfer (STTR...

    Science.gov (United States)

    2012-08-06

    ... Innovation Research (SBIR) Program and Small Business Technology Transfer (STTR) Program Policy Directives... Small Business Innovation Research (SBIR) and Small Business Technology Transfer Program (STTR) Policy... technology@sba.gov . SUPPLEMENTARY INFORMATION: I. Background Information SBA is publishing Policy Directives...

  13. A computer program for designing fin-and-tube heat exchanger for EGR cooler application

    Science.gov (United States)

    Syaiful, Marwan, M. A.; Tandian, N. P.; Bae, M.

    2016-03-01

    EGR (exhaust gas recirculation) cooler is a kind of heat exchanger that is used to cool exhaust gas recirculation prior to be mixed with fresh air in an intake manifold of vehicle in order to obtain good reduction of NOxemissions. A fin-and-tube heat exchanger is more preferred as an EGR cooler than a shell-and-tube heat exchanger in this study due to its compactness. Manually designing many configurations of fin-and-tube heat exchanger for EGR cooler application consumes a lot of time and is high cost. Therefore, a computer aided design process of EGR cooler is required to overcome this problem. The EGR cooler design process was started by arranging the sequences of calculation algorithm in a computer program. A cooling media for this EGR cooler is air. The design is based on the effectiveness-number transfer unit (NTU) method. The EGR cooler design gives the geometry, heat transfer surface area, heat transfer coefficient and pressure drop of the EGR cooler. Comparison of the EGR cooler Nusselt number obtained in this study and that reported in literature shows less than 6.2% discrepancy.

  14. Buildings R&D Breakthroughs. Technologies and Products Supported by the Building Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-04-01

    This report identifies and characterizes commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects sponsored by BTP’s Emerging Technologies subprogram from 2005-2009.

  15. Buildings R&D Breakthroughs: Technologies and Products Supported by the Building Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2012-04-01

    The purpose of the project described in this report is to identify and characterize commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects funded by BTP’s Emerging Technologies subprogram from 2005-2011.

  16. Buildings R&D Breakthroughs: Technologies and Products Supported by the Building Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A.

    2012-04-15

    The purpose of the project described in this report is to identify and characterize commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects funded by BTP’s Emerging Technologies subprogram from 2005-2011.

  17. DOE Solar Energy Technologies Program FY 2005 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Sutula, Raymond A. [DOE Solar Energy Technologies Program, Washington, D.C. (United States)

    2006-03-01

    The DOE Solar Energy Technologies Program FY 2005 Annual Report chronicles the R&D results of the program for fiscal year 2005. In particular, the report describes R&D performed by the Program’s national laboratories and university and industry partners.

  18. 2009 DOE Vehicle Technologies Program Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2009-10-01

    Annual Merit Review and Peer Evaluation Meeting to review the FY2008 accomplishments and FY2009 plans for the Vehicle Technologies Program, and provide an opportunity for industry, government, and academic to give inputs to DOE on the Program with a structured and formal methodology.

  19. Admission Significance Parameters of the Radiologic Technology Program.

    Science.gov (United States)

    Shehane, Donna R.; And Others

    This study was conducted in the radiologic technology department of East Tennessee State University to determine if existing criteria and procedures accurately predict an applicant's potential for the successful completion of program requirements. The 70 students admitted to the program were ranked utilizing standardized evaluation methodology…

  20. Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, Ronald C.

    1980-08-01

    A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described. (MOW)

  1. Marketing Social Service Programs Using Political Campaign Technology.

    Science.gov (United States)

    Bynum, Peter

    1991-01-01

    Discusses how human services agencies can use strategies and information technologies similar to those used in political campaigns to identify needs and attitudes for social services campaigns. Marketing for social services programs is described, and the use of computers for a political campaign and for a teenage pregnancy program is compared.…

  2. FY 1978 aeronautics and space technology program summary

    Science.gov (United States)

    1977-01-01

    Highlights of the aeronautics program include research on aircraft energy efficiency, supersonic cruise aircraft, vertical takeoff and landing aircraft, short haul/short takeoff and landing aircraft, and general aviation aircraft. The space technology program includes work on space structures, propulsion systems, power systems, materials, and electronics.

  3. 75 FR 27984 - Broadband Technology Opportunities Program

    Science.gov (United States)

    2010-05-19

    ... Communications Research (PSCR) program, to provide a platform to test and evaluate systems and to help enable... capabilities through support of broadband-enabled applications, including: streaming video (surveillance... operating platform, enhancing incident response and first-responder safety. D. FCC 700 MHz Waiver Order In...

  4. A Research Program in Computer Technology

    Science.gov (United States)

    1990-12-31

    systlems. The initial program applications included anl autonomous land vehicle. a pilot’s associate. andl a carrier battle group hattle management system...and Internet connectivity (Telnet). The environment provided by thebe jiodes and server-, conceals the fine-grain detail from outside users; users

  5. Report to the Congress: Information Technology Program

    Science.gov (United States)

    2006-01-01

    refereed journals • Direct support of graduate student research (salary and facility support) • NRC/NAS/NAE post-doctoral programs • Specialized local...combat (e.g. Sierra Leonean gangs and Democratic Republic of Congo ( DRC ) gangs were quickly addressed by British Special Forces and French troops

  6. MANTECH (Manufacturing Technology) Prioritization Methodology Program

    Science.gov (United States)

    1984-02-01

    700 comparions are involved. However, the Lotus 1-2-3 computer program, which was designed for this kind of calculation, can provide a spread sheet...evaluations. Because of the recent birth of this effort, project selection is implicit in the in-house process of origination. However, the following

  7. CENTER FOR ADVANCED SEPARATION TECHNOLOGY (CAST) PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Roe-Hoan; Hull, Christopher

    2014-09-30

    The U.S. is the largest producer of mining products in the world. In 2011, U.S. mining operations contributed a total of $232 billion to the nation’s GDP plus $138 billion in labor income. Of this the coal mining industry contributed a total of $97.5 billion to GDP plus $53 billion in labor income. Despite these contributions, the industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations.

  8. NDE Technology Development Program for Non-Visual Volumetric Inspection Technology; Sensor Effectiveness Testing Report

    Energy Technology Data Exchange (ETDEWEB)

    Moran, Traci L.; Larche, Michael R.; Denslow, Kayte M.; Glass, Samuel W.

    2017-08-31

    The Pacific Northwest National Laboratory (PNNL) located in Richland, Washington, hosted and administered Sensor Effectiveness Testing that allowed four different participants to demonstrate the NDE volumetric inspection technologies that were previously demonstrated during the Technology Screening session. This document provides a Sensor Effectiveness Testing report for the final part of Phase I of a three-phase NDE Technology Development Program designed to identify and mature a system or set of non-visual volumetric NDE technologies for Hanford DST primary liner bottom inspection. Phase I of the program will baseline the performance of current or emerging non-visual volumetric NDE technologies for their ability to detect and characterize primary liner bottom flaws, and identify candidate technologies for adaptation and maturation for Phase II of the program.

  9. ORNL Superconducting Technology Program for electric power systems. Annual report for FY 1996

    Energy Technology Data Exchange (ETDEWEB)

    Koncinski, W.S. [ed.; Hawsey, R.A. [comp.

    1997-05-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy`s Office of Energy Efficiency and Renewable Energy to develop the science and technology base needed by US industry for commercial development of electric power applications of high temperature superconductivity. The two major elements of this program are wire development and applications development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from recent open literature publications, presentations, and information prepared for the FY 1996 Annual Program Review held July 31 and August 1, 1996. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to cooperative projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with US industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high temperature superconductor wire and wire-using systems.

  10. ORNL superconducting technology program for electric power systems. Annual report for FY 1993

    Energy Technology Data Exchange (ETDEWEB)

    Hawsey, R.A. [comp.

    1994-04-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy`s Office of Energy Efficiency and Renewable Energy to develop the technology base needed by US industry for commercial development of electric power applications of high-temperature superconductivity. The two major elements of this program are conductor development and applications development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY 1993 Annual Program Review held July 28--29, 1993. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to industrial competitiveness projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer to US industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire products.

  11. ORNL Superconducting Technology Program for Electric Power Systems, Annual Report for FY 1998

    Energy Technology Data Exchange (ETDEWEB)

    Hawsey, R.A.; Murphy, A.W.

    1999-04-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy to develop the science and technology base needed by U.S. industry for commercial development of electric power applications of high temperature superconductivity. The two major elements of this program are wire development and applications development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from recent open literature publications, presentations, and information prepared for the FY 1998 Annual Program Review held July 20-22, 1998. Aspects of ORNL's work that were presented at the Applied Superconductivity Conference (September 1998) are included in this report, as well. This ORNL program is highly leveraged by the staff and other resources of U.S. industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to cooperative projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with U.S. industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high temperature superconductor wire and wire-using systems.

  12. ORNL Superconducting Technology Program for Electric Power Systems--Annual Report for FY 2001

    Energy Technology Data Exchange (ETDEWEB)

    Hawsey, RA

    2002-02-18

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy's Office of Energy Efficiency and Renewable Energy to develop the science and technology base needed by US industry for development of electric power applications of high-temperature superconductivity. The two major elements of this program are wire development and applications development. A new part of the wire research effort was the Accelerated Coated Conductor Initiative. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from recent open literature publications, presentations, and information prepared for the FY 2001 Annual Program Review held August 1-3, 2001. Aspects of ORNL's work that were presented at the International Cryogenic Materials Conference/Cryogenic Engineering Conference (July 2001) are included in this report as well. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. Interlaboratory teams are also in place on a number of industry-driven projects. Working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with US industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire-using systems.

  13. ORNL Superconducting Technology Program for electric power systems. Annual report for FY 1995

    Energy Technology Data Exchange (ETDEWEB)

    Hawsey, R.A. [comp.; Turner, J.W. [ed.

    1996-05-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the U.S. Department of Energy`s Office of Energy Efficiency and Renewable Energy to develop the science and technology base needed by U.S. industry for commercial development of electric power applications of high-temperature superconductivity. The two major elements of this program are wire development and systems development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY 1995 Annual Program Review held August 1-2, 1995. This ORNL program is highly leveraged by the staff and other resources of U.S. industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to cooperative projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with U.S. industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire-using systems.

  14. ORNL Superconducting Technology Program for Electric Energy Systems. Annual report for FY 1992

    Energy Technology Data Exchange (ETDEWEB)

    Hawsey, R.A. [comp.

    1993-02-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy`s (DOE`s) Office of Conservation and Renewable Energy to develop the technology base needed by US industry for commercial development of electric power applications of high-temperature superconductivity. The two major elements of this program are wire development and systems development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY 1992 Peer Review of Projects, conducted by DOE`s Office of Program Analysis, Office of Energy Research. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer to US industry. Working together, the collaborative teams are making tremendous progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire products.

  15. ORNL superconducting technology program for electric power systems. Annual report for FY 1993

    Energy Technology Data Exchange (ETDEWEB)

    Hawsey, R.A. [comp.

    1994-04-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy`s Office of Energy Efficiency and Renewable Energy to develop the technology base needed by US industry for commercial development of electric power applications of high-temperature superconductivity. The two major elements of this program are conductor development and applications development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY 1993 Annual Program Review held July 28--29, 1993. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to industrial competitiveness projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer to US industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire products.

  16. ORNL Superconducting Technology Program for Electric Power Systems: Annual Report for FY 1999

    Energy Technology Data Exchange (ETDEWEB)

    Hawsey, R.A.

    2000-06-13

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy to develop the science and technology base needed by U.S. industry for development of electric power applications of high-temperature superconductivity. The two major elements of this program are wire development and applications development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from recent open literature publications, presentations, and information prepared for the FY 1999 Annual Program Review held July 26-28, 1999. Aspects of ORNL's work that were presented at the International Cryogenic Materials Conference and the Cryogenic Engineering Conference (July 1999) are included in this report, as well. This ORNL program is highly leveraged by the staff and other resources of U.S. industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to cooperative projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with U.S. industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire-using systems.

  17. ORNL Superconducting Technology Program for Electric Power Systems, Annual Report for FY 1999

    Energy Technology Data Exchange (ETDEWEB)

    Hawsey, R.A.; Murphy, A.W

    2000-04-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy to develop the science and technology base needed by U.S. industry for development of electric power applications of high-temperature superconductivity. The two major elements of this program are wire development and applications development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from recent open literature publications, presentations, and information prepared for the FY 1999 Annual Program Review held July 26--28, 1999. Aspects of ORNL's work that were presented at the International Cryogenic Materials Conference and the Cryogenic Engineering Conference (July 1999) are included in this report, as well. This ORNL program is highly leveraged by the staff and other resources of U.S. industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to cooperative projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with U.S. industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire-using systems.

  18. ORNL Superconducting Technology Program for electric power systems: Annual report for FY 1997

    Energy Technology Data Exchange (ETDEWEB)

    Koncinski, W.S.; O`Hara, L.M. [eds.; Hawsey, R.A.; Murphy, A.W. [comps.

    1998-03-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy`s Office of Energy Efficiency and Renewable Energy to develop the science and technology base needed by US industry for commercial development of electric power applications of high temperature superconductivity. The two major elements of this program are wire development and applications development. This document describes the major research and developments activities for this program together with related accomplishments. The technical progress reported was summarized from recent open literature publications, presentations, and information prepared for the FY 1997 Annual Program Review held July 21--23, 1997. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to cooperative projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with US industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high temperature superconductor wire and wire-using systems.

  19. A Research Program in Computer Technology

    Science.gov (United States)

    1979-01-01

    14 (7), 1971, 453-360. 5. Donzeau-Gouge, V., G. Kahn, and B. Lang , A Complete Machine-Checked Definition of a Simple Programming Language Using...Denotational Semantics, IRIA Laborla, Technical Report 330, October 1978. 6. Donzeau-Gouge, V., G. Kahn, and B. Lang , Formal Definition of Ada, Honeywell...May 1976. r S.-..-. . . . . . . . 12. ARPANET TENEX SERVICE T’fhttiral Staff Marion McKinley, Jr. William H. Moore Robert Hines Serge Poievitzky Edward

  20. Proposal for a state health technology assessment program.

    Science.gov (United States)

    Colmenares, Phil

    2012-08-01

    Evidence suggests that a significant number of medical technologies are of little or no benefit to patients. Under current budgetary pressures, state health care programs cannot afford continued spending on unnecessary medical care without further cuts in enrollment. Limiting coverage of high-tech care only to indications supported by good clinical evidence would help save state health care dollars. However, there is currently no public process to formally evaluate new medical interventions in Wisconsin. In fact, new therapies often are introduced into clinical practice, and covered by state health insurance programs, even when there is weak or questionable evidence of clinical effectiveness. This article proposes the creation of a state Health Technology Assessment program in Wisconsin to systematically evaluate new tests or treatments, and to promote evidence-based coverage decisions. Such a program would help limit wasteful spending on unnecessary technologies, reinforce good clinical practice, and protect patients from the risks of interventions that have not been proven effective.

  1. Trend Analyses of Users of a Syringe Exchange Program in Philadelphia, Pennsylvania: 1999-2014.

    Science.gov (United States)

    Maurer, Laurie A; Bass, Sarah Bauerle; Ye, Du; Benitez, José; Mazzella, Silvana; Krafty, Robert

    2016-12-01

    This study examines trends of injection drug users' (IDUs) use of a Philadelphia, Pennsylvania, syringe exchange program (SEP) from 1999 to 2014, including changes in demographics, drug use, substance abuse treatment, geographic indicators, and SEP use. Prevention Point Philadelphia's SEP registration data were analyzed using linear regression, Pearson's Chi square, and t-tests. Over time new SEP registrants have become younger, more racially diverse, and geographically more concentrated in specific areas of the city, corresponding to urban demographic shifts. The number of new registrants per year has decreased, however syringes exchanged have increased. Gentrification, cultural norms, and changes in risk perception are believed to have contributed to the changes in SEP registration. Demographic changes indicate outreach strategies for IDUs may need adjusting to address unique barriers for younger, more racially diverse users. Implications for SEPs are discussed, including policy and continued ability to address current public health threats.

  2. Air-cooled heat exchanger design using successive quadratic programming (SQP)

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, M.T.; Petracci, N.C.; Urbicain, M.J.

    2001-05-01

    A nonlinear optimisation algorithm is applied to the design of air-cooled heat exchangers. In such equipment, the cold fluid (air) is impelled across banks of finned tubes by means of fans in forced or induced draft. The hot stream flows inside the tubes in one or more passes, and the process that takes place may be cooling of either a gas or a liquid, or condensation of either a pure vapor or a mixture. The objective function is the minimum cost of the unit (investment and operation), subject to certain geometric and thermohydraulic constraints. The optimisation algorithm used is that developed by Biegler and Cuthrell, and programmed by them in the OPT package. The problem posed in this case is made of 10 optimisation variables, subject to five constraints related to geometric and operational parameters of the heat exchanger. (Author)

  3. A model technology transfer program for independent operators

    Energy Technology Data Exchange (ETDEWEB)

    Schoeling, L.G.

    1996-08-01

    In August 1992, the Energy Research Center (ERC) at the University of Kansas was awarded a contract by the US Department of Energy (DOE) to develop a technology transfer regional model. This report describes the development and testing of the Kansas Technology Transfer Model (KTTM) which is to be utilized as a regional model for the development of other technology transfer programs for independent operators throughout oil-producing regions in the US. It describes the linkage of the regional model with a proposed national technology transfer plan, an evaluation technique for improving and assessing the model, and the methodology which makes it adaptable on a regional basis. The report also describes management concepts helpful in managing a technology transfer program.

  4. Employers and the exchanges under the small business health options program: examining the potential and the pitfalls.

    Science.gov (United States)

    Jost, Timothy S

    2012-02-01

    The health insurance exchange is the centerpiece of the insurance reforms created by the Affordable Care Act. The Small Business Health Options Program (SHOP) is intended to create a marketplace for small, and perhaps eventually large, employers to purchase health insurance for their employees. This paper introduces a collection of articles that illuminate the need for small-business exchanges and discuss how they will function. The paper also describes the difficulties these exchanges will face, as well as the opportunities they will offer to states, employers, and individuals. The success or failure of small-business exchanges may well hinge on how states choose to address these challenges.

  5. Vehicle Technologies and Fuel Cell Technologies Program: Prospective Benefits Assessment Report for Fiscal Year 2016

    Energy Technology Data Exchange (ETDEWEB)

    Stephens, T. S. [Argonne National Lab. (ANL), Argonne, IL (United States); Taylor, C. H. [TA Engineering, Inc., Catonsville, MD (United States); Moore, J. S. [TA Engineering, Inc., Catonsville, MD (United States); Ward, J. [United States Department of Energy, Washington, DC (United States). Office of Energy Efficiency and Renewable Energy

    2016-02-23

    Under a diverse set of programs, the Vehicle Technologies and Fuel Cell Technologies offices of DOE’s Office of Energy Efficiency and Renewable Energy invest in research, development, demonstration, and deployment of advanced vehicle, hydrogen production, delivery and storage, and fuel cell technologies. This report estimates the benefits of successfully developing and deploying these technologies (a “Program Success” case) relative to a base case (the “No Program” case). The Program Success case represents the future with completely successful deployment of Vehicle Technologies Office (VTO) and Fuel Cell Technologies Office (FCTO) technologies. The No Program case represents a future in which there is no contribution after FY 2016 by the VTO or FCTO to these technologies. The benefits of advanced vehicle, hydrogen production, delivery and storage, and fuel cell technologies were estimated on the basis of differences in fuel use, primary energy use, and greenhouse gas (GHG) emissions from light-, medium- and heavy-duty vehicles, including energy and emissions from fuel production, between the base case and the Program Success case. Improvements in fuel economy of various vehicle types, growth in the stock of fuel cell vehicles and other advanced technology vehicles, and decreased GHG intensity of hydrogen production and delivery in the Program Success case over the No Program case were projected to result in savings in petroleum use and GHG emissions. Benefits were disaggregated by individual program technology areas, which included the FCTO program and the VTO subprograms of batteries and electric drives; advanced combustion engines; fuels and lubricants; materials (for reduction in vehicle mass, or “lightweighting”); and, for medium- and heavy-duty vehicles, reduction in rolling and aerodynamic resistance. Projections for the Program Success case indicate that by 2035, the average fuel economy of on-road, light-duty vehicle stock could be 47% to 76

  6. Systems autonomy technology: Executive summary and program plan

    Science.gov (United States)

    Bull, John S (Editor)

    1987-01-01

    The National Space Strategy approved by the President and Congress in 1984 sets for NASA a major goal of conducting effective and productive space applications and technology programs which contribute materially toward United States leadership and security. To contribute to this goal, OAST supports the Nation's civil and defense space programs and overall economic growth. OAST objectives are to ensure timely provision of new concepts and advanced technologies, to support both the development of NASA missions in space and the space activities of industry and other organizations, to utilize the strengths of universities in conducting the NASA space research and technology program, and to maintain the NASA centers in positions of strength in critical space technology areas. In line with these objectives, NASA has established a new program in space automation and robotics that will result in the development and transfer and automation technology to increase the capabilities, productivity, and safety of NASA space programs including the Space Station, automated space platforms, lunar bases, Mars missions, and other deep space ventures. The NASA/OAST Automation and Robotics program is divided into two parts. Ames Research Center has the lead role in developing and demonstrating System Autonomy capabilities for space systems that need to make their own decisions and do their own planning. The Jet Propulsion Laboratory has the lead role for Telerobotics (that portion of the program that has a strong human operator component in the control loop and some remote handling requirement in space). This program is intended to be a working document for NASA Headquarters, Program Offices, and implementing Project Management.

  7. Cosmic Origins Program Annual Technology Report

    Science.gov (United States)

    Pham, Bruce Thai; Neff, Susan Gale

    2016-01-01

    What is the Cosmic Origins (COR) Program? From ancient times, humans have looked up at the night sky and wondered: Are we alone? How did the universe come to be? How does the universe work? COR focuses on the second question. Scientists investigating this broad theme seek to understand the origin and evolution of the universe from the Big Bang to the present day, determining how the expanding universe grew into a grand cosmic web of dark matter enmeshed with galaxies and pristine gas, forming, merging, and evolving over time.

  8. Energy management programs - computer technology, a tool

    Energy Technology Data Exchange (ETDEWEB)

    Perron, G

    1996-08-01

    Energy management systems were defined and reviewed, focusing on how the development in computer technology has impacted on the development of energy management systems. It was shown that the rise of micro-computer systems made it possible to create a tool that is well adapted to the urgent need for optimizing electromechanical systems to meet energy reduction criteria while still maintaining occupant comfort. Two case studies were cited to show the kind of savings realized by the different energy management systems installed. Besides managing energy, energy management systems can also help in detecting certain operating failures or irregularities in equipment configurations, monitoring and measuring energy consumption, as well as performing such peripherally related functions as gathering data about operating and space temperatures.

  9. Design and technology parameters influence on durability for heat exchangers tube to tubesheet joints

    Science.gov (United States)

    Ripeanu, R. G.

    2017-02-01

    The main failures of heat exchangers are: corrosion of tubes and jacket, tubes blockage and failures of tube to tubesheet joints also by corrosion. The most critical zone is tube to tubesheet joints. Depending on types of tube to tubesheet joints, in order to better respect conditions of tension and compression, this paper analyses the tubesheet holes shapes, smooth and with a grove, on corrosion behavior. In the case of welding tubes with tubesheet, welding parameters modify corrosion behavior. Were realized welded joints by three welding regimes and tested at corrosion in two media, tap water and industrial water. Were tested also samples made of smooth tubes, finned tubes and tubes coated with a passive product as applied by a heat exchanger manufacturer. For all samples, the roughness parameters were measured, before and after the corrosion tests. The obtained corrosion rates show that stress values and their distribution along the joint modify the corrosion behavior. The optimum welding parameters were established in order to increase the joint durability. The paper has shown that passive product used is not proper chosen and the technology of obtaining rolled thread pipes diminishes tubes’ durability by increasing the corrosion rate.

  10. The strategic use of standardized information exchange technology in a university health system.

    Science.gov (United States)

    Cheng, Po-Hsun; Chen, Heng-Shuen; Lai, Feipei; Lai, Jin-Shin

    2010-04-01

    This article illustrates a Web-based health information system that is comprised of specific information exchange standards related to health information for healthcare services in National Taiwan University Health System. Through multidisciplinary teamwork, medical and informatics experts collaborated and studied on system scope definition, standard selection challenges, system implementation barriers, system management outcomes, and further expandability of other systems. After user requirement analysis and prototyping, from 2005 to 2008, an online clinical decision support system with multiple functions of reminding and information push was implemented. It was to replace its original legacy systems and serve among the main hospital and three branches of 180-200 clinics and 7,500-8,000 patient visits per day. To evaluate the effectiveness of this system, user surveys were performed, which revealed that the average score of user satisfaction increased from 2.80 to 3.18 on a 4-point scale. Among the items, especially e-learning for training service, courtesy communications for system requests, and courtesy communications for system operations showed statistically significant improvement. From this study, the authors concluded that standardized information exchange technologies can be used to create a brand new enterprise value and steadily obtain more competitive advantages for a prestige healthcare system.

  11. Pushing the boundaries of outreach work: the case of needle exchange outreach programs in Canada.

    Science.gov (United States)

    Strike, Carol J; O'Grady, Caroline; Myers, Ted; Millson, Margaret

    2004-07-01

    In this paper, we examine the challenges of defining the boundaries of outreach work using the example of needle exchange programs. In particular, we examine the multiple and inter-related factors that extend needle exchange outreach work beyond its official mandate. Using semi-structured interviews, 59 workers at 15 programs in Ontario, Canada were asked questions about operational policies and routines. An iterative and inductive analytic process was used. Over time, most outreach workers develop a well-defined sense of the activities they consider to be consistent with a harm reduction approach and the types of conduct that are considered to be acceptable and professional. Workers conceptualize their roles to encompass education and support but are reluctant to impose a rigid definition of their roles. A pragmatic and humble stance combined with strong beliefs in social justice encourages workers to find informal solutions to meet client needs that extend beyond the program mandate. As a result, doing 'extra' is the norm. These extra efforts are informal, but often regular, expansions of the service complement. Construction of flexible boundaries provides opportunities to meet many client needs and unexpected situations; however, going the extra-mile strains resources. A minority of workers blur the boundaries between private and professional lives. Further, a variety of personal, social and socio-political forces encourage outreach workers to continually redefine the boundaries of their roles and service complements.

  12. The Marine Language Exchange Program: an International Approach to Ocean Sciences

    Science.gov (United States)

    Nowell, A.; Robigou, V.

    2004-12-01

    The ability of scientists to communicate across cultural and linguistic barriers is crucial for the global economic sustainability and protection of the world's oceans. Yet students with majors in the sciences and engineering constitute less than 2% of those who study abroad each year. And even fewer are students who study in countries where English is not the first language. The Marine Language Exchange program is a case study of an international and interdisciplinary collaboration between faculties in the languages and the sciences that address this gap. A consortium of U.S. and European institutions including University of Washington (Washington), Eckerd College (Florida), University of Hilo (Hawaii), Université de la Rochelle (France), Université de Liège (Belgium), and Universidad de Las Palmas (Spain) is developing a multilingual, marine sciences exchange program in an effort to internationalize their ocean sciences departments. The program includes a three-week, intensive "bridge" course designed to reinforce second language skills in the context of marine sciences, and prepare undergraduate students for the cultural and educational differences of their host country. Following this preparatory immersion experience students from each institution enroll in courses abroad for 6 to 12 months to study marine sciences for full academic credit. Different disciplinary approaches -Second Language Acquisition, English as a Second Language and Marine Science- prepare science students to contribute to the study and the management of the world\\'{}s oceans with an awareness of the cultural issues reflected by national marine policies.

  13. Handheld technology acceptance in radiologic science education and training programs

    Science.gov (United States)

    Powers, Kevin Jay

    The purpose of this study was to explore the behavioral intention of directors of educational programs in the radiologic sciences to adopt handheld devices to aid in managing student clinical data. Handheld devices were described to participants as a technology representing a class of mobile electronic devices including, but not limited to, personal digital assistants such as a Palm TX, Apple iPod Touch, Apple iPad or Hewlett Packard iPaq, and cellular or smartphones with third generation mobile capabilities such as an Apple iPhone, Blackberry or Android device. The study employed a non-experimental, cross-sectional survey design to determine the potential of adopting handheld technologies based on the constructs of Davis's (1989) Technology Acceptance Model. An online self-report questionnaire survey instrument was used to gather study data from 551 entry level radiologic science programs specializing in radiography, radiation therapy, nuclear medicine and medical sonography. The study design resulted in a single point in time assessment of the relationship between the primary constructs of the Technology Acceptance Model: perceived usefulness and perceived ease of use, and the behavioral intention of radiography program directors to adopt the information technology represented by hand held devices. Study results provide justification for investing resources to promote the adoption of mobile handheld devices in radiologic science programs and study findings serve as a foundation for further research involving technology adoption in the radiologic sciences.

  14. Air-Sea Exchange Of CO2: A Multi-Technology Approach

    Science.gov (United States)

    Tengberg, A.; Almroth, E.; Anderson, L.; Hall, P.; Hjalmarsson, S.; Lefevre, D.; Omstedt, A.; Rutgersson, A.; Sahlee, E.; Smedman, A.; Wesslander, K.

    2006-12-01

    We report on experiences and results from a multidisciplinary project in which we try to elucidate the complex processes involved in air-sea exchange of CO2. This study was performed in the Baltic Sea (off the Swedish island Gotland) and combined the following technologies: - Meteorological measurements of wind, turbulence, temperature, humidity, humidity flux, CO2 and CO2 flux at several levels from a fixed observation tower - Hourly PCO2 measurements with a moored automatic instrument - Collection of dissolved oxygen, temperature, salinity and turbidity data at different levels in the water column at 1-minute intervals - Daily light (PAR) and primary production measurements obtained with a moored automatic incubator - Daily primary production measurements using manual methods - Use of an acoustic current profiler to collect water column information on currents, turbulence, water level and waves - Repetitive water column profiles, from a ship, of dissolved inorganic carbon, oxygen, nutrients, alkalinity, pH, PAR, Chlorophyll A, salinity and temperature

  15. Six University Canada/US/Mexico exchange program in Earth Hazards (EHaz)

    Science.gov (United States)

    Stix, J.; Rose, W. I.

    2005-12-01

    This program is a consortium of six research-based universities in Canada, Mexico, and the U.S (Michigan Tech, Buffalo, McGill, Waterloo, UNAM and Colima) funded by the Department of education in the US and equivalent organizations in Canada and Mexico as part of the NAFTA agreement. The focus area for the mobility program is mitigation of geological natural hazards in North America. The consortium universities will exchange students and faculty in several engineering and science disciplines (e.g. environmental engineering, civil engineering, geological engineering, social sciences and geology) involved in the study of natural geological hazards. Students in the social sciences also will be exchanged, recognizing that the solution of natural hazards problems involves critical political, social, and economic aspects. Students will be mobilized among the participating universities through one- to two-semester visits and up to 60 more students will be mobilized via short-term, intensive courses. Student activities will consist of three stages: intensive language training, natural hazards coursework, and professional or research internships with local industries, agencies or at the host university. In each of the next three years there will be a joint advanced volcanology class run via videoconferencing and a three week field trip to areas of volcanological interest in Canada, US and Mexico. The course and field trip foci for the next three years are: 2006: Megaeruptions/ LongValley and Yellowstone; 2007: Volcanic edifice failure/ Cascades and Western Canada 2008: Convergent plate Boundary Volcanism/ Mexican Volcanic Belt Although the six universities will have first access to the exchange we are constructing ways for other volcanology programs to share the teleconference courses and field trips.

  16. Preliminary Technical Risk Analysis for the Geothermal Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-01-18

    This report explains the goals, methods, and results of a probabilistic analysis of technical risk for a portfolio of R&D projects in the DOE Geothermal Technologies Program (The Program). The analysis is a task by Princeton Energy Resources International, LLC, in support of the National Renewable Energy Laboratory on behalf of the Program. The main challenge in the analysis lies in translating R&D results to a quantitative reflection of technical risk for a key Program metric: levelized cost of energy (LCOE).

  17. Coal technology program. Progress report, September 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-10-01

    A successful hydrocarbonization experiment at 300 psi of hydrogen and approximately 1050/sup 0/F was completed with Illinois No. 6 coal that had been chemically pretreated with aqueous CaO and NaOH. In pressurized carbonization, one successful experiment at approximately 1100/sup 0/F and 415 psi of methane was completed with vacuum distillation residue from the H-Coal process. In the thick section pressure vessel work, procedures are being developed with the DATA TRAK heat treating facility to allow preparation of relatively large heat treated samples of 2 /sup 1///sub 4/ Cr-1 Mo steel. In the Gas-Fired Potassium Boiler Project, the potassium system installation was completed, the fill and drain tank was filled with potassium, and the checkout of the instruments and controls was nearly completed. The Coal-Fired Alkali Metal Power System Design Study was completed and a draft report describing the design was issued. Cesium was selected as the working fluid for the topping cycle. For the reference design, the furnace operated at atmospheric pressure and the cycle conditions for the power conversion systems were 1500/sup 0/F (1089 K) to 900/sup 0/F (756 K) for the topping cycle and 2400 psi (16.5 MPa)/1000/sup 0/F (811 K)/1000/sup 0/F (811 K) to 1 /sup 1///sub 2/ in. Hg (5079 Pa) for the steam system. ORNL was requested by DOE to develop a program for testing coal feeders currently under development. Work was continued on process modeling, the preparation of a Synthetic Fuels Research Digest, a survey of industrial coal conversion equipment capabilities, and studies of flash hydropyrolysis, hot gas purification processes, processes for heat recovery, and hydrogen production by the steam/molten iron process. Process and program analysis studies were continued on low-Btu gasification, direct combustion, advanced power conversion systems, liquefaction, high-Btu gasification, in-situ gasification, and coal beneficiation.

  18. Physics of the Cosmos (PCOS) Technology Development Program Overview

    Science.gov (United States)

    Pham, B. Thai; Clampin, M.; Werneth, R. L.

    2014-01-01

    The Physics of the Cosmos (PCOS) Program Office was established in FY11 and resides at the NASA Goddard Space Flight Center (GSFC). The office serves as the implementation arm for the Astrophysics Division at NASA Headquarters for PCOS Program related matters. We present an overview of the Program’s technology management activities and the Program’s technology development portfolio. We discuss the process for addressing community-provided technology needs and the Technology Management Board (TMB)-vetted prioritization and investment recommendations. This process improves the transparency and relevance of technology investments, provides the community a voice in the process, and leverages the technology investments of external organizations by defining a need and a customer. Goals for the PCOS Program envisioned by the National Research Council’s (NRC) “New Worlds, New Horizons in Astronomy and Astrophysics” (NWNH) Decadal Survey report include science missions and technology development for dark energy, gravitational waves, X-ray, and inflation probe science.

  19. NASA's Advanced Information Systems Technology (AIST) Program: Advanced Concepts and Disruptive Technologies

    Science.gov (United States)

    Little, M. M.; Moe, K.; Komar, G.

    2014-12-01

    NASA's Earth Science Technology Office (ESTO) manages a wide range of information technology projects under the Advanced Information Systems Technology (AIST) Program. The AIST Program aims to support all phases of NASA's Earth Science program with the goal of enabling new observations and information products, increasing the accessibility and use of Earth observations, and reducing the risk and cost of satellite and ground based information systems. Recent initiatives feature computational technologies to improve information extracted from data streams or model outputs and researchers' tools for Big Data analytics. Data-centric technologies enable research communities to facilitate collaboration and increase the speed with which results are produced and published. In the future NASA anticipates more small satellites (e.g., CubeSats), mobile drones and ground-based in-situ sensors will advance the state-of-the-art regarding how scientific observations are performed, given the flexibility, cost and deployment advantages of new operations technologies. This paper reviews the success of the program and the lessons learned. Infusion of these technologies is challenging and the paper discusses the obstacles and strategies to adoption by the earth science research and application efforts. It also describes alternative perspectives for the future program direction and for realizing the value in the steps to transform observations from sensors to data, to information, and to knowledge, namely: sensor measurement concepts development; data acquisition and management; data product generation; and data exploitation for science and applications.

  20. Advanced ignition and propulsion technology program

    Energy Technology Data Exchange (ETDEWEB)

    Oldenborg, R.; Early, J.; Lester, C.

    1998-11-01

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Reliable engine re-ignition plays a crucial role in enabling commercial and military aircraft to fly safely at high altitudes. This project addressed research elements critical to the optimization of laser-based igniter. The effort initially involved a collaborative research and development agreement with B.F. Goodrich Aerospace and Laser Fare, Inc. The work involved integrated experiments with theoretical modeling to provide a basic understanding of the chemistry and physics controlling the laser-induced ignition of fuel aerosols produced by turbojet engine injectors. In addition, the authors defined advanced laser igniter configurations that minimize laser packaging size, weight, complexity and power consumption. These innovative ignition concepts were shown to reliably ignite jet fuel aerosols over a broad range of fuel/air mixture and a t fuel temperatures as low as -40 deg F. The demonstrated fuel ignition performance was highly superior to that obtained by the state-of-the-art, laser-spark ignition method utilizing comparable laser energy. The authors also developed a laser-based method that effectively removes optically opaque deposits of fuel hydrocarbon combustion residues from laser window surfaces. Seven patents have been either issued or are pending that resulted from the technology developments within this project.

  1. Technology Goes Bush: Using Mobile Technologies to Support Learning in a Bush Kinder Program

    Science.gov (United States)

    Masters, Jennifer; Grogan, Leanne

    2015-01-01

    A "bush kinder" is the Australian equivalent of a European forest kindergarten. Although it is not usual for technology to be used in the type of program, the authors suggest that mobile technologies can be used creatively and sensitively to support learning in the bush kinder context. This paper describes an ethnographical case study…

  2. Information technology -- Telecommunications and information exchange between systems -- Corporate telecommunication networks -- Signalling interworking between QSIG and H.323 -- Generic functional protocol for the support of supplementary services

    CERN Document Server

    International Organization for Standardization. Geneva

    2001-01-01

    Information technology -- Telecommunications and information exchange between systems -- Corporate telecommunication networks -- Signalling interworking between QSIG and H.323 -- Generic functional protocol for the support of supplementary services

  3. Information technology - Telecommunications and information exchange between systems - Private integrated services network - Specification, functional model and information flows - Call interception additional network feature

    CERN Document Server

    International Organization for Standardization. Geneva

    2003-01-01

    Information technology - Telecommunications and information exchange between systems - Private integrated services network - Specification, functional model and information flows - Call interception additional network feature

  4. Information technology - Telecommunications and information exchange between systems - Private integrated services network - Specification, functional model and information flows - Call priority interruption and call priority interruption protection supplementary services

    CERN Document Server

    International Organization for Standardization. Geneva

    2003-01-01

    Information technology - Telecommunications and information exchange between systems - Private integrated services network - Specification, functional model and information flows - Call priority interruption and call priority interruption protection supplementary services

  5. Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification, functional model and information flows - Call transfer supplementary service

    CERN Document Server

    International Organization for Standardization. Geneva

    2003-01-01

    Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification, functional model and information flows - Call transfer supplementary service

  6. Information technology - Telecommunications and information exchange between systems - Private integrated services network - Specification, functional model and information flows - Recall supplementary service

    CERN Document Server

    International Organization for Standardization. Geneva

    2003-01-01

    Information technology - Telecommunications and information exchange between systems - Private integrated services network - Specification, functional model and information flows - Recall supplementary service

  7. Information technology - Telecommunications and information exchange between systems - Elements of management information related to OSI transport layer standards; Amendment 1: NCMS Management; Technical Corrigendum 1

    CERN Document Server

    International Organization for Standardization. Geneva

    1994-01-01

    Information technology - Telecommunications and information exchange between systems - Elements of management information related to OSI transport layer standards; Amendment 1: NCMS Management; Technical Corrigendum 1

  8. 76 FR 59182 - Bureau of Educational and Cultural Affairs; Exchange Visitor Program; Summer Work Travel Program...

    Science.gov (United States)

    2011-09-23

    ... academic break (i.e., summer vacation) for a period not to exceed four months. On April 26, 2011, the... 2011 summer season and monitored the media for additional reports of program problems. As a result of... jobs for those whose pre- arranged placements were unsatisfactory); and policies for refunding deposits...

  9. Coal technology program. Progress report, May 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-07-01

    Two successful operability tests with sustained operation of the bench-scale hydrocarbonizer were achieved with Illinois No. 6 coal diluted with char. Several activities in the area of nondestructive testing of coatings are reviewed. Failure analysis activities included examination of several components from the solvent refined coal plants at Wilsonville, Alabama, and Tacoma, Washington. In the gas-fired potassium boiler project, all of the design work were completed except for several of the instrument and control drawings. In the design studies of a coal-fired alkali metal vapor topping cycle, the first phase of a cycle analysis and the design and analysis of a metal vapor turbine were completed. A report entitled ''Critical Component Test Facility--Advance Planning for Test Modules'' presents the planning study for the conceptual design of component test modules on a nonsite-specific basis. Engineering studies, project evaluation and process and program analysis of coal conversion processes were continued. A report on the landfill storage of solid wastes from coal conversion is being finalized. In the coal-fueled MIUS project, a series of successful tests of the coal feeding system and a report on the analysis of 500-hr fire-side corrosion tests in a fluidized bed combustor were completed.

  10. Coal Technology Program progress report, March 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-05-01

    In the final hydrocarbonization experiment with Wyodak subbituminous coal, the coal was hydrocarbonized at 1100/sup 0/F and 300 psig in the recirculating fluidized bed. Two-dimensional pyrolysis behavior of an eastern bituminous coal (Pittsburgh seam) continues to be examined. Results to date indicate that swelling is significantly more pronounced at very low heating rates. Several activities in progress are related to inspection techniques for wear- and process-resistant coatings. Experimental investigations of fireside corrosion on tubing from a fluidized bed combustor have proceeded with metallographic examination and analyses of the scale formed during the test exposure. Methods for nondestructively determining remaining tube wall thickness and scale thickness were developed. Failure prevention and analysis work was aimed at several parts from the Solvent Refined Coal Plant in Ft. Lewis, Washington. The mechanical design of the gas-fired potassium boiler system was completed with the issue of the last four drawings. One electrical and five instrument and control drawings were completed and some fabrication work was completed. Surveys of industrial coal conversion capabilities continued with emphasis on rotating components, valves, hot gas cleanup devices, and heat recovery equipment. Process and program analysis research studies continued with work on low-Btu gasification, direct combustion, advanced power conversion, liquefaction, high-Btu gasification, in-situ gasification, and beneficiation. In the fossil energy environmental project, a first draft of a landfill assessment report was issued for review. Work continued on the Environmental Monitoring Handbook and Pipeline Gas Programmatic Assessment.

  11. Invention Development Program Helps Nurture NCI at Frederick Technologies | Poster

    Science.gov (United States)

    The Invention Development Fund (IDF) was piloted by the Technology Transfer Center (TTC) in 2014 to facilitate the commercial development of NCI technologies. The IDF received a second round of funding from the NCI Office of the Director and the Office of Budget and Management to establish the Invention Development Program (IDP) for fiscal year 2016. The IDP is using these funds to help advance a second set of inventions.

  12. Invention Development Program Helps Nurture NCI at Frederick Technologies | Poster

    Science.gov (United States)

    The Invention Development Fund (IDF) was piloted by the Technology Transfer Center (TTC) in 2014 to facilitate the commercial development of NCI technologies. The IDF received a second round of funding from the NCI Office of the Director and the Office of Budget and Management to establish the Invention Development Program (IDP) for fiscal year 2016. The IDP is using these funds to help advance a second set of inventions.

  13. Fossil Energy Advanced Research and Technology Development Materials Program

    Energy Technology Data Exchange (ETDEWEB)

    Cole, N.C.; Judkins, R.R. (comps.)

    1992-12-01

    Objective of this materials program is to conduct R and D on materials for fossil energy applications with focus on longer-term and generic needs of the various fossil fuel technologies. The projects are organized according to materials research areas: (1) ceramics, (2) new alloys: iron aluminides, advanced austenitics and chromium niobium alloys, and (3) technology development and transfer. Separate abstracts have been prepared.

  14. Building technological capability within satellite programs in developing countries

    Science.gov (United States)

    Wood, Danielle; Weigel, Annalisa

    2011-12-01

    This paper explores the process of building technological capability in government-led satellite programs within developing countries. The key message is that these satellite programs can learn useful lessons from literature in the international development community. These lessons are relevant to emerging satellite programs that leverage international partnerships in order to establish local capability to design, build and operate satellites. Countries with such programs include Algeria, Nigeria, Turkey, Malaysia and the United Arab Emirates. The paper first provides background knowledge about space activity in developing countries, and then explores the nuances of the lessons coming from the international development literature. Developing countries are concerned with satellite technology because satellites provide useful services in the areas of earth observation, communication, navigation and science. Most developing countries access satellite services through indirect means such as sharing data with foreign organizations. More countries, however, are seeking opportunities to develop satellite technology locally. There are objective, technically driven motivations for developing countries to invest in satellite technology, despite rich debate on this topic. The paper provides a framework to understand technical motivations for investment in satellite services, hardware, expertise and infrastructure in both short and long term. If a country decides to pursue such investments they face a common set of strategic decisions at the levels of their satellite program, their national context and their international relationships. Analysis of past projects shows that countries have chosen diverse strategies to address these strategic decisions and grow in technological capability. What is similar about the historical examples is that many countries choose to leverage international partnerships as part of their growth process. There are also historical examples from

  15. Bioremediation Education Science and Technology (BEST) Program Annual Report 1999

    Energy Technology Data Exchange (ETDEWEB)

    Hazen, Terry C.

    2000-07-01

    The Bioremediation, Education, Science and Technology (BEST) partnership provides a sustainable and contemporary approach to developing new bioremedial technologies for US Department of Defense (DoD) priority contaminants while increasing the representation of underrepresented minorities and women in an exciting new biotechnical field. This comprehensive and innovative bioremediation education program provides under-represented groups with a cross-disciplinary bioremediation cirruculum and financial support, coupled with relevant training experiences at advanced research laboratories and field sites. These programs are designed to provide a stream of highly trained minority and women professionals to meet national environmental needs.

  16. Small Business Innovation Research and Small Business Technology Transfer Programs

    Science.gov (United States)

    Garrison, Lynn; Jasper, Gwen

    2015-01-01

    The Small Business Innovation Research (SBIR)/Small Business Technology Transfer (STTR) programs fund the research, development, and demonstration of innovative technologies that fulfill NASA's needs as described in the annual Solicitations and have significant potential for successful commercialization. The only eligible participants are small business concern (SBC) with 500 or fewer employees or a nonprofit research institute such as a university or a research laboratory with ties to an SBC. These programs are potential sources of seed funding for the development of small business innovations.

  17. Status of Propulsion Technology Development Under the NASA In-Space Propulsion Technology Program

    Science.gov (United States)

    Anderson, David; Kamhawi, Hani; Patterson, Mike; Pencil, Eric; Pinero, Luis; Falck, Robert; Dankanich, John

    2014-01-01

    Since 2001, the In-Space Propulsion Technology (ISPT) program has been developing and delivering in-space propulsion technologies for NASA's Science Mission Directorate (SMD). These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, Flagship and sample return missions currently under consideration. The ISPT program is currently developing technology in three areas that include Propulsion System Technologies, Entry Vehicle Technologies, and Systems/Mission Analysis. ISPT's propulsion technologies include: 1) the 0.6-7 kW NASA's Evolutionary Xenon Thruster (NEXT) gridded ion propulsion system; 2) a 0.3-3.9kW Halleffect electric propulsion (HEP) system for low cost and sample return missions; 3) the Xenon Flow Control Module (XFCM); 4) ultra-lightweight propellant tank technologies (ULTT); and 5) propulsion technologies for a Mars Ascent Vehicle (MAV). The NEXT Long Duration Test (LDT) recently exceeded 50,000 hours of operation and 900 kg throughput, corresponding to 34.8 MN-s of total impulse delivered. The HEP system is composed of the High Voltage Hall Accelerator (HIVHAC) thruster, a power processing unit (PPU), and the XFCM. NEXT and the HIVHAC are throttle-able electric propulsion systems for planetary science missions. The XFCM and ULTT are two component technologies which being developed with nearer-term flight infusion in mind. Several of the ISPT technologies are related to sample return missions needs: MAV propulsion and electric propulsion. And finally, one focus of the Systems/Mission Analysis area is developing tools that aid the application or operation of these technologies on wide variety of mission concepts. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness.

  18. Overview of the Defense Programs Research and Technology Development Program for Fiscal Year 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-30

    This documents presents a programmatic overview and program element plan summaries for conceptual design and assessment; physics; computation and modeling; system engineering science and technology; electronics, photonics, sensors, and mechanical components; chemistry and materials; special nuclear materials, tritium, and explosives.

  19. The environmental technology expo: Proceedings of the 1992 technical program

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    This conference was held February 24-27, 1992 in Chicago, Illinois to provide a forum for exchange of information on important environmental issues. Topics of discussion include the following: Clean Air Act; hazardous waste sites; new technologies in equipment maintenance; waste treatment; waste minimization; bioremediation; pre-treatment sewer regulations for industry; solvent recovery; air pollution control; ground water remediation; environmental audits; underground/aboveground storage tanks; and environmental pollution. Individual chapters have been processed separately for inclusion in the appropriate data bases.

  20. HPCC technology awareness program: Improved economic competitiveness through technology awareness, transfer and application. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    A need has been defined by Congress for the DOE National Laboratories to participate in various dual use and technology transfer programs. This requirement has spawned several technology transfer approaches at the DOE laboratories. These programs are designed to encourage large and small business to bring their problems and needs forward, and to allow the labs to transfer effective high performance computing technology to the commercial marketplace. This IG Technologies grant from the DOE was undertaken to address the issues and problems associated with technology transfer between the DOE National Laboratories and commercial industry. The key focus is to gain an understanding of how DOE and industry independently and collectively view the requirements and the missing elements that could allow DOE to facilitate HPCC technology transfer. At issue is HPCC Technology Transfer for the High Performance Computing industry and its relationship to the DOE National Laboratories. Several observations on this are addressed. The issue of a ``Technology Utilization Gap`` between the National Laboratories and Independent Software Vendors is discussed. This study addressed the HPCC Technology Transfer plans of all six DOE National Labs. Study team members briefed numerous industrial users of HPCC technology as to the feasibility of technology transfer for various applications. Significant findings of the effort are that the resistance to technology transfer is much higher than anticipated for both the National Labs and industry. Also, HPCC Technology Transfer is observed to be a large company`s dominion. Small businesses have a difficult time in addressing the requirements of technology transfer using Cooperative Research and Development Agreements (CRADA`s). Large businesses and the DOE National Labs however, often have requirements and objectives which are at cross purposes, making effective technology transfer difficult.

  1. SDI (Strategic Defense Initiative) Software Technology Program Plan

    Science.gov (United States)

    1987-06-01

    Computing Initiative program under Simpson and Sears . Industrial research labs are studying fundamental issues of the man-machine interface to formulate...Reform," The Brookings Review, Summer 1986, pp. 11-16. [Maidique 80] Maidique, Modesto , "Entrepreneurs, Champions, and % Technological Innovation...Management Tasks Area," from Computer t. Special Issue on STARS Program, (November 1983), pp. 56-62. [Maidique 80] Maidique, Modesto A., "Entrepreneurs

  2. Recommendations for strengthening the infrared technology component of any condition monitoring program

    Science.gov (United States)

    Nicholas, Jack R., Jr.; Young, R. K.

    1999-03-01

    place the condition monitoring program in perspective); (11) Use of procedures for Predictive, Condition Monitoring and maintenance in general (To get consistent results); (12) Developing a scheme for predictive, condition monitoring personnel qualification and certification (To provide a career path and incentive to advance skill level and value to the company); (13) Analyst Assignment to Technologies and Related Duties (To make intelligent use of the skills of individuals assigned); (14) Condition Monitoring Analyst Selection Criteria (Key attributes for success are mentioned.); (15) Design and Modification to Support Monitoring (For old and new machinery to facilitate data acquisition); (16) Establishment of a Museum of Components and Samples Pulled from Service for Cause (For orientation and awareness training of operators and managers and exchange of information between analysts); (17) Goals (To promote a proactive program approach for machinery condition improvement).

  3. Factors influencing adjustment of high school students in an international exchange program.

    Science.gov (United States)

    Furukawa, T; Shibayama, T

    1994-12-01

    The present study aims to investigate which psychosocial factors measured before departure are predictive of various aspects of intercultural adjustment among Japanese teenagers enrolled in a foreign exchange student program. A cohort of 188 Japanese high school students, who had been selected to spend 1 year in various countries of the world under the aegis of an international exchange student program, was administered the Maudsley Personality Inventory, the Parental Bonding Instrument, the General Health Questionnaire and the People in Your Life Scale before their departure from Japan. Six months after arrival in the host community, they were again asked to complete the General Health Questionnaire and relevant sections of the People in Your Life Scale. The students showed highly significant and substantial deterioration in all three areas of psychosocial adjustment: they reported more psychiatric symptoms, less availability of social relationships, and less satisfaction with them in their host community than at home. Psychiatric symptoms were best predicted by perceived adequacy of intimate attachments and neuroticism measured before departure, availability of social relationships abroad by availability and adequacy of social relationships and adequacy of attachments at home, and satisfaction with social relationships abroad by satisfaction with attachments at home and by paternal care before age 16. This study thus demonstrates that studying abroad entails deterioration in psychosocial adjustment of the adolescents studied and that different factors are influential in different aspects of adjustment. The importance of a prospective and multifaceted study of intercultural adjustment process is emphasized.

  4. Academic performance and personal experience of local, international, and collaborative exchange students enrolled in an Australian pharmacy program.

    Science.gov (United States)

    Davey, Andrew K; Grant, Gary D; Anoopkumar-Dukie, Shailendra

    2013-09-12

    To assess the academic performance and experiences of local, international, and collaborative exchange students enrolled in a 4-year Australian bachelor of pharmacy degree program. Survey instruments exploring the demographics, background, and academic and cultural experiences of students during the program were administered in 2005 to students in all 4 years. Additionally, grades from each semester of the program for students (406 local, 70 international, 155 exchange) who graduated between 2002 and 2006 were analyzed retrospectively. The main differences found in the survey responses among the 3 groups were in students' motivations for choosing the degree program and school, with international and collaborative exchange students having put more thought into these decisions than local students. The average grades over the duration of the program were similar in all 3 demographic groups. However, local students slightly outperformed international students, particularly at the start of the year, whereas collaborative exchange students' grades mirrored those of local students during the 2 years prior to leaving their home country of Malaysia but more closely mirrored those of international students in the final 2 years after arriving on campus in Australia. Despite differences in academic backgrounds and culture, international and exchange students can perform well compared to local students in a bachelor of pharmacy program and were actually more satisfied than local students with the overall experience. Studying in a foreign country can negatively influence academic grades to a small extent and this is probably related to adjusting to the new environment.

  5. 75 FR 33268 - Technology Innovation Program (TIP) Notice of Availability of Funds; Amendment

    Science.gov (United States)

    2010-06-11

    ... National Institute of Standards and Technology Technology Innovation Program (TIP) Notice of Availability... solicitation of proposals for the fiscal year 2010 Technology Innovation Program (TIP) competition. NIST is... National Institute of Standards and Technology, Technology Innovation Program, 100 Bureau Drive, Stop 4750...

  6. NASA Johnson Space Center SBIR STTR Program Technology Innovations

    Science.gov (United States)

    Krishen, Kumar

    2007-01-01

    The Small Business Innovation Research (SBIR) Program increases opportunities for small businesses to participate in research and development (R&D), increases employment, and improves U.S. competitiveness. Specifically the program stimulates U.S. technological innovation by using small businesses to meet federal R&D needs, increasing private-sector commercialization of innovations derived from federal R&D, and fostering and encouraging the participation of socially disadvantaged businesses. In 2000, the Small Business Technology Transfer (STTR) Program extended and strengthened the SBIR Program, increasing its emphasis on pursuing commercial applications by awarding contracts to small business concerns for cooperative R&D with a nonprofit research institution. Modeled after the SBIR Program, STTR is nevertheless a separately funded activity. Technologies that have resulted from the Johnson Space Center SBIR STTR Program include: a device for regenerating iodinated resin beds; laser-assisted in-situ keratomileusis or LASIK; a miniature physiological monitoring device capable of collecting and analyzing a multitude of real-time signals to transmit medical data from remote locations to medical centers for diagnosis and intervention; a new thermal management system for fibers and fabrics giving rise to new line of garments and thermal-enhancing environments; and a highly electropositive material that attracts and retains electronegative particles in water.

  7. The Analysis and Structuring of the Causes Impeding the Introduction of Advanced Technologies for Exchange Grain Trading

    Directory of Open Access Journals (Sweden)

    Vinnychenko Olena V

    2015-03-01

    Full Text Available In the article the main causes impeding the development and introduction of advanced technologies for grain trading on commodity exchanges in Ukraine have been identified and structured. The generalization of existing shortcomings in operation of the domestic commodity exchanges has served the basis for the model, within which there were built: a directed graph of correlations between the above mentioned shortcomings in the operation of exchanges, the matrix of dependency and reachability. The causes have been identified and structured, the main ones being determined, which, in turn, makes it possible to carry out the correct sequence of actions and emphasize the primary issues requiring priority solutions at making management decisions in order to promote the grain exchange market. The suggested approach clearly shows the correlation between the existing causes and sequence of their elimination.

  8. Geothermal technology development program. Annual progress report, October 1981-September 1982

    Energy Technology Data Exchange (ETDEWEB)

    Kelsey, J.R. (ed.)

    1983-08-01

    The status of ongoing Research and Development (R and D) within the Geothermal Technology Development Program is described. The program emphasizes research in rock penetration mechanics, fluid technology, borehole mechanics, diagnostics technology, and permeability enhancement.

  9. 77 FR 22359 - Innovative Technology Experiences for Students and Teachers (ITEST) Program; Comment Request

    Science.gov (United States)

    2012-04-13

    ... Innovative Technology Experiences for Students and Teachers (ITEST) Program; Comment Request AGENCY: National...: Innovative Technology Experiences for Students and Teachers (ITEST) Program. Evaluation for the National...: Initial clearance. Abstract: Innovative Technology Experiences for Students and Teachers (ITEST) is a...

  10. Geothermal technology development program. Annual progress report, October 1980-September 1981

    Energy Technology Data Exchange (ETDEWEB)

    Kelsey, J.R. (ed.)

    1982-09-01

    The status of ongoing Research and Development (R and D) within the Geothermal Technology Development Program is described. The program emphasizes research in rock penetration mechanics, fluid technology, borehole mechanics, and diagnostics technology.

  11. 30 CFR 402.7 - Water-Resources Technology Development Program.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Water-Resources Technology Development Program... RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Description of Water-Resources Programs § 402.7 Water-Resources Technology Development Program. (a) Subject to the availability...

  12. Advanced Thermionic Technology Program: summary report. Volume 4. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1984-10-01

    This report summarizes the progress made by the Advanced Thermionic Technology Program during the past several years. This Program, sponsored by the US Department of Energy, has had as its goal adapting thermionic devices to generate electricity in a terrestrial (i.e., combustion) environment. Volume 4 (Part E) is a highly technical discussion of the attempts made by the Program to push the state-of-the-art beyond the current generation of converters and is directed toward potential researchers engaged in this same task. These technical discussions are complemented with Appendices where appropriate.

  13. Newly available technologies present expanding opportunities for scientific and technical information exchange

    Science.gov (United States)

    Tolzman, Jean M.

    1993-01-01

    The potential for expanded communication among researchers, scholars, and students is supported by growth in the capabilities for electronic communication as well as expanding access to various forms of electronic interchange and computing capabilities. Increased possibilities for information exchange, collegial dialogue, collaboration, and access to remote resources exist as high-speed networks, increasingly powerful workstations, and large, multi-user computational facilities are more frequently linked and more commonly available. Numerous writers speak of the telecommunications revolution and its impact on the development and dissemination of knowledge and learning. One author offers the phrase 'Scholarly skywriting' to represent a new form of scientific communication that he envisions using electronic networks. In the United States (U.S.), researchers associated with the National Science Foundation (NSF) are exploring 'nationwide collaboratories' and 'digital collaboration.' Research supported by the U.S. National Aeronautics and Space Administration (NASA) points to a future where workstations with built-in audio, video monitors, and screen sharing protocols are used to support collaborations with colleagues located throughout the world. Instruments and sensors located worldwide will produce data streams that will be brought together, analyzed, and distributed as new findings. Researchers will have access to machines that can supply domain-specific information in addition to locator and directory assistance. New forms of electronic journals will emerge and provide opportunities for researchers and scientists to exchange information electronically and interactively in a range of structures and formats. Ultimately, the wide-scale use of these technologies in the dissemination of research results and the stimulation of collegial dialogue will change the way we represent and express our knowledge of the world. A new paradigm will evolve--perhaps a truly worldwide

  14. Navajo-ABLE: Replication Model Navajo Assistive Technology Loan Program. Final Program Evaluation.

    Science.gov (United States)

    Norton, Katie Jebb

    This final report discusses the activities and outcomes of the Navajo Assistive Bank of Loanable Equipment (Navajo-ABLE), a federally funded program designed to provide assistive technology (AT) devices, services, technical information, funding information, and training for Navajo children and youth with disabilities. The program was operated and…

  15. Animal Science Technology. An Experimental Developmental Program. Volume I, Report of the Developmental Program.

    Science.gov (United States)

    Brant, Herman G.; And Others

    In 1961, administrative personnel at Delhi College in New York observed that formal training programs for animal science technicians were virtually nonexistant. Response to this apparent need resulted in the initiation of perhaps the first 2-year Animal Science Technology Program in the nation. This two-volume report is the result of an extensive…

  16. Review of technical program and progress. LBL geothermal exploration technology development program, FY 1982

    Energy Technology Data Exchange (ETDEWEB)

    Goldstein, N.E.

    1982-01-01

    The objectives, method of approach, main program elements, and progress through FY 1982 for Geothermal Exploration Technology Program at LBL are reviewed. Current tasks include controlled-source electromagnetic research, seismological research, magnetotelluric research, and electromagnetic technique evaluation and numerical modeling.

  17. 78 FR 31535 - Assistive Technology Alternative Financing Program

    Science.gov (United States)

    2013-05-24

    ... slate of applicants developed for the Assistive Technology (AT) Alternative Financing Program (AFP) in... AT AFP. The notice indicated that the absolute and competitive preference priorities in the notice.... L. 113-006). In FY 2012, we received 15 applications for AT AFP grants and made three grant...

  18. Central Florida Film Production Technology Training Program. Final Report.

    Science.gov (United States)

    Valencia Community Coll., Orlando, FL.

    The Central Florida Film Production Technology Training program provided training to prepare persons for employment in the motion picture industry. Students were trained in stagecraft, sound, set construction, camera/editing, and post production. The project also developed a curriculum model that could be used for establishing an Associate in…

  19. Central Florida Film Production Technology Training Program. Curriculum.

    Science.gov (United States)

    Valencia Community Coll., Orlando, FL.

    The Central Florida Film Production Technology Training program provided training to prepare 134 persons for employment in the motion picture industry. Students were trained in stagecraft, sound, set construction, camera/editing, and post production. The project also developed a curriculum model that could be used for establishing an Associate in…

  20. Bioenergy Technologies Office Multi-Year Program Plan: July 2014

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-07-09

    This is the May 2014 Update to the Bioenergy Technologies Office Multi-Year Program Plan, which sets forth the goals and structure of the Office. It identifies the research, development, demonstration, and deployment activities the Office will focus on over the next five years and outlines why these activities are important to meeting the energy and sustainability challenges facing the nation.

  1. Handheld Technology Acceptance in Radiologic Science Education and Training Programs

    Science.gov (United States)

    Powers, Kevin Jay

    2012-01-01

    The purpose of this study was to explore the behavioral intention of directors of educational programs in the radiologic sciences to adopt handheld devices to aid in managing student clinical data. Handheld devices were described to participants as a technology representing a class of mobile electronic devices including, but not limited to,…

  2. Venture Creation Programs: Bridging Entrepreneurship Education and Technology Transfer

    Science.gov (United States)

    Lackéus, Martin; Williams Middleton, Karen

    2015-01-01

    Purpose: The purpose of this paper is to explore how university-based entrepreneurship programs, incorporating real-life venture creation into educational design and delivery, can bridge the gap between entrepreneurship education and technology transfer within the university environment. Design/methodology/approach: Based on a literature review…

  3. Impact of Individualized Instructional Materials on Technology Education Programs.

    Science.gov (United States)

    Welty, Kenneth; Tsai, Wei-Kun

    1995-01-01

    A survey of technology instructors in junior and senior high schools determined the impact of adopting modular programs using individualized instructional materials (IIMs) on their teaching styles: teacher-directed methods decreased; use of student-oriented materials increased, while use of teacher-oriented materials decreased; frequency of…

  4. Status of Assistive Technology Instruction in University Personnel Preparation Programs

    Science.gov (United States)

    Bausch, Margaret E.; Ault, Melinda Jones

    2012-01-01

    The reauthorization of IDEA mandates that students with a disability must be considered for assistive technology (AT). However, in order to implement the mandate, teachers and related service personnel must be knowledgeable about many aspects of AT. The purpose of this study was to gauge the extent to which personnel preparation programs believe…

  5. Venture Creation Programs: Bridging Entrepreneurship Education and Technology Transfer

    Science.gov (United States)

    Lackéus, Martin; Williams Middleton, Karen

    2015-01-01

    Purpose: The purpose of this paper is to explore how university-based entrepreneurship programs, incorporating real-life venture creation into educational design and delivery, can bridge the gap between entrepreneurship education and technology transfer within the university environment. Design/methodology/approach: Based on a literature review…

  6. Impact of Individualized Instructional Materials on Technology Education Programs.

    Science.gov (United States)

    Welty, Kenneth; Tsai, Wei-Kun

    1995-01-01

    A survey of technology instructors in junior and senior high schools determined the impact of adopting modular programs using individualized instructional materials (IIMs) on their teaching styles: teacher-directed methods decreased; use of student-oriented materials increased, while use of teacher-oriented materials decreased; frequency of…

  7. 76 FR 4137 - Comment Request: Innovative Technology Experiences for Students and Teachers (ITEST) Program

    Science.gov (United States)

    2011-01-24

    ... Comment Request: Innovative Technology Experiences for Students and Teachers (ITEST) Program AGENCY... INFORMATION: Title of Collection: Innovative Technology Experiences for Students and Teachers (ITEST) Program... Teachers (ITEST) is a National Science Foundation program that responds to current concerns and...

  8. Computer program for distance learning of pesticide application technology.

    Science.gov (United States)

    Maia, Bruno; Cunha, Joao P A R

    2011-12-01

    Distance learning presents great potential for mitigating field problems on pesticide application technology. Thus, due to the lack of teaching material about pesticide spraying technology in the Portuguese language and the increasing availability of distance learning, this study developed and evaluated a computer program for distance learning about the theory of pesticide spraying technology using the tools of information technology. The modules comprising the course, named Pulverizar, were: (1) Basic concepts, (2) Factors that affect application, (3) Equipments, (4) Spraying nozzles, (5) Sprayer calibration, (6) Aerial application, (7) Chemigation, (8) Physical-chemical properties, (9) Formulations, (10) Adjuvants, (11) Water quality, and (12) Adequate use of pesticides. The program was made available to the public on July 1(st), 2008, hosted at the web site www.pulverizar.iciag.ufu.br, and was simple, robust and practical on the complementation of traditional teaching for the education of professionals in Agricultural Sciences. Mastering pesticide spraying technology by people involved in agricultural production can be facilitated by the program Pulverizar, which was well accepted in its initial evaluation.

  9. MHD magnet technology development program summary, September 1982

    Energy Technology Data Exchange (ETDEWEB)

    1983-11-01

    The program of MHD magnet technology development conducted for the US Department of Energy by the Massachusetts Institute of Technology during the past five years is summarized. The general strategy is explained, the various parts of the program are described and the results are discussed. Subjects covered include component analysis, research and development aimed at improving the technology base, preparation of reference designs for commercial-scale magnets with associated design evaluations, manufacturability studies and cost estimations, the detail design and procurement of MHD test facility magnets involving transfer of technology to industry, investigations of accessory subsystem characteristics and magnet-flow-train interfacing considerations and the establishment of tentative recommendations for design standards, quality assurance procedures and safety procedures. A systematic approach (framework) developed to aid in the selection of the most suitable commercial-scale magnet designs is presented and the program status as of September 1982 is reported. Recommendations are made for future work needed to complete the design evaluation and selection process and to provide a sound technological base for the detail design and construction of commercial-scale MHD magnets. 85 references.

  10. Preliminary Technical Risk Analysis for the Geothermal Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    McVeigh, J.; Cohen, J.; Vorum, M.; Porro, G.; Nix, G.

    2007-03-01

    This report explains the goals, methods, and results of a probabilistic analysis of technical risk for a portfolio of R&D projects in the DOE Geothermal Technologies Program ('the Program'). The analysis is a task by Princeton Energy Resources International, LLC (PERI), in support of the National Renewable Energy Laboratory (NREL) on behalf of the Program. The main challenge in the analysis lies in translating R&D results to a quantitative reflection of technical risk for a key Program metric: levelized cost of energy (LCOE). This requires both computational development (i.e., creating a spreadsheet-based analysis tool) and a synthesis of judgments by a panel of researchers and experts of the expected results of the Program's R&D.

  11. ISO New England: Results of Ancillary Service Pilot Programs, Alternative Technology Regulation Pilot Program and Demand Response Reserves Pilot Program

    Energy Technology Data Exchange (ETDEWEB)

    Lowell, Jon [ISO New England, Holyoke, MA (United States); Yoshimura, Henry [ISO New England, Holyoke, MA (United States)

    2011-10-26

    This PowerPoint presentation compares performance of pilot program assets and generation resources in alternative technology regulation and demand response reserves for flywheels and residential electric thermal storage.

  12. Method for Incorporation of Controllability in Heat Exchanger Network Synthesis by Integrating Mathematical Programming and Knowledge Engineering

    Institute of Scientific and Technical Information of China (English)

    李志红

    2002-01-01

    A method for incorporation of controlling the heat exchanger networks with or without splits is proposed by integrating mathematical programming and knowledge engineering.The simultaneous optimal mathematical model is established.This method can be practically used in the integration of large-scale heat exchanger networks,not only to synthesize automatically but also to satisfy the requirement of structural controllability with more nobjective human intervention.

  13. Geothermal well technology: drilling and completions program plan

    Energy Technology Data Exchange (ETDEWEB)

    Newsom, M.M.; Barnett, J.H.; Baker, L.E.; Varnado, S.G.; Polito, J.

    1978-03-01

    The drilling and completion portion of the long-range Geothermal Well Technology Program is presented. A nine-year program is outlined based upon an objective of reducing the cost of geothermal energy development and providing a major stimulus to meeting the power-on-line goals established by the Department of Energy. Major technological challenges to be addressed in this program include improvements in geothermal drilling fluids, downhole drilling motors, rock bits and the development of high flow rate, high temperature completion and reinjection techniques. In addition, fundamental studies will be conducted in drilling energetics to improve the understanding of drilling mechanics. This will lead to advanced development of high performance, low cost geothermal drilling systems.

  14. High-level waste management technology program plan

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, H.D.

    1995-01-01

    The purpose of this plan is to document the integrated technology program plan for the Savannah River Site (SRS) High-Level Waste (HLW) Management System. The mission of the SRS HLW System is to receive and store SRS high-level wastes in a see and environmentally sound, and to convert these wastes into forms suitable for final disposal. These final disposal forms are borosilicate glass to be sent to the Federal Repository, Saltstone grout to be disposed of on site, and treated waste water to be released to the environment via a permitted outfall. Thus, the technology development activities described herein are those activities required to enable successful accomplishment of this mission. The technology program is based on specific needs of the SRS HLW System and organized following the systems engineering level 3 functions. Technology needs for each level 3 function are listed as reference, enhancements, and alternatives. Finally, FY-95 funding, deliverables, and schedules are s in Chapter IV with details on the specific tasks that are funded in FY-95 provided in Appendix A. The information in this report represents the vision of activities as defined at the beginning of the fiscal year. Depending on emergent issues, funding changes, and other factors, programs and milestones may be adjusted during the fiscal year. The FY-95 SRS HLW technology program strongly emphasizes startup support for the Defense Waste Processing Facility and In-Tank Precipitation. Closure of technical issues associated with these operations has been given highest priority. Consequently, efforts on longer term enhancements and alternatives are receiving minimal funding. However, High-Level Waste Management is committed to participation in the national Radioactive Waste Tank Remediation Technology Focus Area. 4 refs., 5 figs., 9 tabs.

  15. Program on Promoting Climate Change Adaptation Technologies Bridging Policy Making and Science Research in Taiwan

    Science.gov (United States)

    Chiang, Y.; Chiang, W.; Sui, C.; Tung, C.; Ho, H.; Li, M.; Chan, S.; Climate Change Adaptation Technologies Program, National Science Council, Taiwan

    2010-12-01

    Climate changes adaptation needs innovative technological revolution on demand for transdisciplinary studies in various temporal and spatial scales. In our proposed program, a systematic and scientific framework will be developed to promote innovative adaptation technologies with respect to providing decision making information for government sectors, enhancing applicability of scientific research output, strengthening national research capabilities, and integrating both academic and non-academic resources. The objectives of this program are to identify key issues, required technologies, and scientific knowledge for climate change adaptations, and to build a transdisciplinary platform bridging science-supported technologies required by government sectors and demand-oriented scientific research conducted by academic communities. The approach proposed herein will be practiced in vulnerable regions, such as urban, rural, mountain, river basin, and coastal areas, which are particularly sensitive to climate change. The first phase of 3-year (2011~2013) work is to deploy framework and strategies of climate change impact assessment and adaptation measures between related government sectors and researchers from academic communities. The proposed framework involves three principle research groups, namely Environmental System, Vulnerability Assessment, and Risk Management and Adaptation Technology. The goal of the first group, Environmental System, is to combine climate change projections with enhanced scientific and environmental monitoring technologies for better adaptations to future scenarios in different social, economic, and environmental sectors to support adaptation measures planning and to reduce uncertainties on assessing vulnerability. The goal of the second group, Vulnerability Assessment, is to identify interfaces and information structures of climate change vulnerably issues and to develop protocol, models, and indices for vulnerability assessment. The goal of

  16. 5 CFR 2641.207 - One-year restriction on any former private sector assignee under the Information Technology...

    Science.gov (United States)

    2010-01-01

    ... private sector assignee under the Information Technology Exchange Program representing, aiding, counseling... assignee under the Information Technology Exchange Program representing, aiding, counseling or assisting in... the Information Technology Exchange Program, 5 U.S.C. chapter 37, no former assignee shall...

  17. Shellside flow-induced tube vibration in typical heat exchanger configurations: overview of a research program

    Energy Technology Data Exchange (ETDEWEB)

    Halle, H.; Chenoweth, J.M.; Wambsganss, M.W.

    1986-01-01

    A comprehensive research program is being conducted to develop the necessary criteria to assist designers and operators of shell-and-tube heat exchangers to avoid detrimental flow-induced tube vibration. This paper presents an overview of the insights gained from shellside water-flow testing on a horizontal, industrial-sized test exchanger that can be configured in many ways using interchangeable tube bundles and replaceable nozzles. Nearly 50 different configurations have been tested representing various combinations of triangular, square, rotated-triangular, and rotated-square tubefield layouts; odd and even numbers of crosspasses; and both single- and double-segmental baffles with different cut sizes and orientations. The results are generally consistent with analytical relationships that predict tube vibration response by the combined reinforcing effect of the vibration mode shape and flow velocity distribution. An understanding of the vibration and instability performance is facilitated by recognizing that the excitation is induced by three separate, though sometimes interacting, flow conditions. These are the crossflows that generate ''classic'' fluidelastic instabilities in the interior of the tube bundle, the entrance and exit bundle flow from and into the shell nozzles, and the localized high velocity bypass and leakage stream flows. The implications to design and/or possible field remedies to avoid vibration problems are discussed. 17 refs., 10 figs.

  18. Complementary knowledge sharing: Experiences of nursing students participating in an educational exchange program between Madagascar and Norway.

    Science.gov (United States)

    Tjoflåt, Ingrid; Razaonandrianina, Julie; Karlsen, Bjørg; Hansen, Britt Sætre

    2017-02-01

    To describe how Malagasy and Norwegian nursing students experience an educational exchange program in Madagascar. Previous studies show that nursing students participating in an educational exchange program enhanced their cultural knowledge and experienced personal growth. However, few studies have described two-way exchange programs, including experiences from both the hosts' and the guest students' perspectives. This study applies a descriptive qualitative design. Data were collected in 2015 by means of five semi-structured interviews with Malagasy students and two focus group interview sessions with Norwegian students. They were analysed using qualitative content analysis. The study was conducted in Madagascar. The data analyses revealed one main theme and two sub-themes related to the Malagasy and Norwegian nursing students' experiences. Main theme: complementary knowledge sharing; sub-themes: (1) learning from each other and (2) challenges of working together. The findings indicate that both the Malagasy and Norwegian nursing students experienced the exchange program as valuable and essential in exchanging knowledge. They also highlighted challenges, linked mainly to language barriers and the lack of available resources. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Office of Industrial Technologies: Summary of program results

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-01-01

    Working in partnership with industry, the US Department of Energy`s (DOE`s) Office of Industrial Technologies (OIT) is helping reduce industrial energy use, emissions, and waste while boosting productivity. Operating within the Office of Energy Efficiency and Renewable Energy (EE), OIT conducts research, development, demonstration, and technology transfer efforts that are producing substantial, measurable benefits to industry. This document summarizes some of the impacts of OIT`s programs through 1997. OIT tracks energy savings as well as other benefits associated with the successfully commercialized technologies resulting from OIT-supported research partnerships. Specifically, a chart shows current and cumulative energy savings as well as cumulative reductions of various air pollutants including particulates, volatile organic compounds (VOCs), nitrogen oxides (NO{sub x}), sulfur oxides (SO{sub x}), and the greenhouse gas, carbon dioxide (CO{sub 2}). The bulk of the document consists of four appendices. Appendix 1 describes the technologies currently available commercially, along with their applications and benefits; Appendix 2 describes the OIT-supported emerging technologies that are likely to be commercialized within the next year or two; Appendix 3 describes OIT-sponsored technologies used in commercial applications in the past that are no longer tracked; and Appendix 4 describes the methodology used to assess and track OIT-supported technologies.

  20. Augmenting Space Technology Program Management with Secure Cloud & Mobile Services

    Science.gov (United States)

    Hodson, Robert F.; Munk, Christopher; Helble, Adelle; Press, Martin T.; George, Cory; Johnson, David

    2017-01-01

    The National Aeronautics and Space Administration (NASA) Game Changing Development (GCD) program manages technology projects across all NASA centers and reports to NASA headquarters regularly on progress. Program stakeholders expect an up-to-date, accurate status and often have questions about the program's portfolio that requires a timely response. Historically, reporting, data collection, and analysis were done with manual processes that were inefficient and prone to error. To address these issues, GCD set out to develop a new business automation solution. In doing this, the program wanted to leverage the latest information technology platforms and decided to utilize traditional systems along with new cloud-based web services and gaming technology for a novel and interactive user environment. The team also set out to develop a mobile solution for anytime information access. This paper discusses a solution to these challenging goals and how the GCD team succeeded in developing and deploying such a system. The architecture and approach taken has proven to be effective and robust and can serve as a model for others looking to develop secure interactive mobile business solutions for government or enterprise business automation.

  1. Dissemination of Technology to Evaluate Healthy Food Incentive Programs.

    Science.gov (United States)

    Freedman, Darcy A; Hunt, Alan R; Merritt, Katie; Shon, En-Jung; Pike, Stephanie N

    2017-03-01

    Federal policy supports increased implementation of monetary incentive interventions for chronic disease prevention among low-income populations. This study describes how a Prevention Research Center, working with a dissemination partner, developed and distributed technology to support nationwide implementation and evaluation of healthy food incentive programming focused on Supplemental Nutrition Assistance Program recipients. FM Tracks, an iOS-based application and website, was developed to standardize evaluation methods for healthy food incentive program implementation at direct-to-consumer markets. This evaluation examined diffusion and adoption of the technology over 9 months (July 2015-March 2016). Data were analyzed in 2016. FM Tracks was disseminated to 273 markets affiliated with 37 regional networks in 18 states and Washington, DC. All markets adopted the sales transaction data collection feature, with nearly all recording at least one Supplemental Nutrition Assistance Program (99.3%) and healthy food incentive (97.1%) transaction. A total of 43,493 sales transactions were recorded. By the ninth month of technology dissemination, markets were entering individual sales transactions using the application (34.5%) and website (29.9%) and aggregated transactions via website (35.6%) at similar rates. Use of optional evaluation features like recording a customer ID with individual transactions increased successively with a low of 22.2% during the first month to a high of 69.2% in the ninth month. Systematic and widely used evaluation technology creates possibilities for pragmatic research embedded within ongoing, real-world implementation of food access interventions. Technology dissemination requires supportive technical assistance and continuous refinement that can be advanced through academic-practitioner partnerships. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  2. Benefit Estimates of Terminal Area Productivity Program Technologies

    Science.gov (United States)

    Hemm, Robert; Shapiro, Gerald; Lee, David; Gribko, Joana; Glaser, Bonnie

    1999-01-01

    This report documents benefit analyses for the NASA Terminal Area Technology (TAP) technology programs. Benefits are based on reductions in arrival delays at ten major airports over the 10 years from 2006 through 2015. Detailed analytic airport capacity and delay models were constructed to produce the estimates. The goal of TAP is enable good weather operations tempos in all weather conditions. The TAP program includes technologies to measure and predict runway occupancy times, reduce runway occupancy times in bad weather, accurately predict wake vortex hazards, and couple controller automation with aircraft flight management systems. The report presents and discusses the estimate results and describes the models. Three appendixes document the model algorithms and discuss the input parameters selected for the TAP technologies. The fourth appendix is the user's guide for the models. The results indicate that the combined benefits for all TAP technologies at all 10 airports range from $550 to $650 million per year (in constant 1997 dollars). Additional benefits will accrue from reductions in departure delays. Departure delay benefits are calculated by the current models.

  3. NASA's mobile satellite communications program; ground and space segment technologies

    Science.gov (United States)

    Naderi, F.; Weber, W. J.; Knouse, G. H.

    1984-10-01

    This paper describes the Mobile Satellite Communications Program of the United States National Aeronautics and Space Administration (NASA). The program's objectives are to facilitate the deployment of the first generation commercial mobile satellite by the private sector, and to technologically enable future generations by developing advanced and high risk ground and space segment technologies. These technologies are aimed at mitigating severe shortages of spectrum, orbital slot, and spacecraft EIRP which are expected to plague the high capacity mobile satellite systems of the future. After a brief introduction of the concept of mobile satellite systems and their expected evolution, this paper outlines the critical ground and space segment technologies. Next, the Mobile Satellite Experiment (MSAT-X) is described. MSAT-X is the framework through which NASA will develop advanced ground segment technologies. An approach is outlined for the development of conformal vehicle antennas, spectrum and power-efficient speech codecs, and modulation techniques for use in the non-linear faded channels and efficient multiple access schemes. Finally, the paper concludes with a description of the current and planned NASA activities aimed at developing complex large multibeam spacecraft antennas needed for future generation mobile satellite systems.

  4. NASA's mobile satellite communications program; ground and space segment technologies

    Science.gov (United States)

    Naderi, F.; Weber, W. J.; Knouse, G. H.

    1984-01-01

    This paper describes the Mobile Satellite Communications Program of the United States National Aeronautics and Space Administration (NASA). The program's objectives are to facilitate the deployment of the first generation commercial mobile satellite by the private sector, and to technologically enable future generations by developing advanced and high risk ground and space segment technologies. These technologies are aimed at mitigating severe shortages of spectrum, orbital slot, and spacecraft EIRP which are expected to plague the high capacity mobile satellite systems of the future. After a brief introduction of the concept of mobile satellite systems and their expected evolution, this paper outlines the critical ground and space segment technologies. Next, the Mobile Satellite Experiment (MSAT-X) is described. MSAT-X is the framework through which NASA will develop advanced ground segment technologies. An approach is outlined for the development of conformal vehicle antennas, spectrum and power-efficient speech codecs, and modulation techniques for use in the non-linear faded channels and efficient multiple access schemes. Finally, the paper concludes with a description of the current and planned NASA activities aimed at developing complex large multibeam spacecraft antennas needed for future generation mobile satellite systems.

  5. Moving beyond non-engagement on regulated needle-syringe exchange programs in Australian prisons

    Directory of Open Access Journals (Sweden)

    Levy Michael

    2009-05-01

    Full Text Available Abstract Background Australia is at a fork in the road with the possibility of a needle-syringe exchange program (NSP to be introduced at the new prison in the ACT. However, the current situation is characterised by non-engagement from major stakeholders. We explore why informed discussion will not be enough to convince prison officers, policy makers and the wider community of the benefits of prison-based NSPs. Other methods of engagement and communication will be proposed – in that may provide avenues for "breakthrough". Methods A review of the literature on needle-syringe exchanges and harm reduction strategies within the context of prisons and prisoner health was conducted. Literature on strategies to change attitudes and move beyond intractable situations was also consulted. In addition, one author, DM, conducted a two-hour interview with an ex-prison officer. Results No studies were found which investigated the potential efficacy of interventions to modify attitudes or behaviours in the specific context of introducing an NSP into a prison. Nonetheless, several theories were identified which may explain the failure of informed discussion alone to create change in this situation and may therefore lead to suggestions for engagement and communication to move towards a resolution Discussion Cognitive-behavioural therapy highlights the importance of individual cognitions and how they shape behaviours in any change campaign. Social identity theory emphasizes changes to social processes that may open the prison officer workforce to change. Peace studies also suggests socialization strategies such as observing an established and effective prison-based needle-syringe exchange. Social marketing provides suggestions on how to sell an exchange to ensuring the benefits are framed to outweigh the costs. Conclusion Psychology, peace studies and social marketing all agree people's views must be carefully collected and analysed if people are going to be

  6. 34 CFR 403.1 - What is the State Vocational and Applied Technology Education Program?

    Science.gov (United States)

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What is the State Vocational and Applied Technology... TECHNOLOGY EDUCATION PROGRAM General § 403.1 What is the State Vocational and Applied Technology Education Program? (a) Under the State Vocational and Applied Technology Education Program, the Secretary...

  7. Solid Polymer Electrolyte (SPE) fuel cell technology program

    Science.gov (United States)

    1979-01-01

    The overall objectives of the Phase IV Solid Polymer Electrolyte Fuel Cell Technology Program were to: (1) establish fuel cell life and performance at temperatures, pressures and current densities significantly higher than those previously demonstrated; (2) provide the ground work for a space energy storage system based on the solid polymer electrolyte technology (i.e., regenerative H2/O2 fuel cell); (3) design, fabricate and test evaluate a full-scale single cell unit. During this phase, significant progress was made toward the accomplishment of these objectives.

  8. The syringe gap: an assessment of sterile syringe need and acquisition among syringe exchange program participants in New York City

    Directory of Open Access Journals (Sweden)

    Siegler Anne

    2009-01-01

    Full Text Available Abstract Background Programmatic data from New York City syringe exchange programs suggest that many clients visit the programs infrequently and take few syringes per transaction, while separate survey data from individuals using these programs indicate that frequent injecting – at least daily – is common. Together, these data suggest a possible "syringe gap" between the number of injections performed by users and the number of syringes they are receiving from programs for those injections. Methods We surveyed a convenience sample of 478 injecting drug users in New York City at syringe exchange programs to determine whether program syringe coverage was adequate to support safer injecting practices in this group. Results Respondents reported injecting a median of 60 times per month, visiting the syringe exchange program a median of 4 times per month, and obtaining a median of 10 syringes per transaction; more than one in four reported reusing syringes. Fifty-four percent of participants reported receiving fewer syringes than their number of injections per month. Receiving an inadequate number of syringes was more frequently reported by younger and homeless injectors, and by those who reported public injecting in the past month. Conclusion To improve syringe coverage and reduce syringe sharing, programs should target younger and homeless drug users, adopt non-restrictive syringe uptake policies, and establish better relationships with law enforcement and homeless services. The potential for safe injecting facilities should be explored, to address the prevalence of public injecting and resolve the 'syringe gap' for injecting drug users.

  9. Mississippi Curriculum Framework for Emergency Medical Technology--Basic (Program CIP: 51.0904). Emergency Medical Technology--Paramedic (Program CIP: 51.0904). Postsecondary Programs.

    Science.gov (United States)

    Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

    This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the emergency medical technology (EMT) programs cluster. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline…

  10. Cast Metals Coalition Technology Transfer and Program Management Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Gwyn, Mike

    2009-03-31

    The Cast Metals Coalition (CMC) partnership program was funded to ensure that the results of the Department of Energy's (DOE) metalcasting research and development (R&D) projects are successfully deployed into industry. Specifically, the CMC program coordinated the transfer and deployment of energy saving technologies and process improvements developed under separately funded DOE programs and projects into industry. The transition of these technologies and process improvements is a critical step in the path to realizing actual energy savings. At full deployment, DOE funded metalcasting R&D results are projected to save 55% of the energy used by the industry in 1998. This closely aligns with DOE's current goal of driving a 25% reduction in industrial energy intensity by 2017. In addition to benefiting DOE, these energy savings provide metalcasters with a significant economic advantage. Deployment of already completed R&D project results and those still underway is estimated to return over 500% of the original DOE and industry investment. Energy savings estimates through December 2008 from the Energy-Saving Melting and Revert Reduction Technology (E-SMARRT) portfolio of projects alone are 12 x 1012 BTUs, with a projection of over 50 x 1012 BTUs ten years after program completion. These energy savings and process improvements have been made possible through the unique collaborative structure of the CMC partnership. The CMC team consists of DOE's Office of Industrial Technology, the three leading metalcasting technical societies in the U.S: the American Foundry Society; the North American Die Casting Association; and the Steel Founders Society of America; and the Advanced Technology Institute (ATI), a recognized leader in distributed technology management. CMC provides collaborative leadership to a complex industry composed of approximately 2,100 companies, 80% of which employ less than 100 people, and only 4% of which employ more than 250 people

  11. An engineering research and technology program for an evolving, multi-decade Mission to Planet Earth

    Science.gov (United States)

    Sadin, Stanley R.; Johnston, Gordon I.; Hudson, Wayne R.

    1991-01-01

    A study is presented that examines the technological needs of future systems, surveys current and planned activities and highlights significant accomplishments in the research and technology program of the multidecade Mission to Planet Earth (MTPE). Consideration is given to recent program redirection in MTPE, the initiation of the high performance computing and communications program and the potential impact on the technology programs. The technology set is divided into three subsets covering information, observation, and infrastructure technologies.

  12. Characterization, Monitoring, and Sensor Technology Integrated Program (CMST-IP). Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The Characterization, Monitoring, and Sensor Technology Integrated Program seeks to deliver needed technologies, timely and cost-effectively, to the Office of Waste Management (EM-30), the Office of Environmental Restoration (EM-40), and the Office of Facility Transition and Management (EM-60). The scope of characterizations monitoring, and sensor technology needs that are required by those organizations encompass: (1) initial location and characterization of wastes and waste environments - prior to treatment; (2) monitoring of waste retrieval, remediation and treatment processes; (3) characterization of the co-position of final waste treatment forms to evaluate the performance of waste treatments processes; and (4) site closure and compliance monitoring. Wherever possible, the CMST-IP fosters technology transfer and commercialization of technologies that it sponsors.

  13. The Information Technology Program Manager’s Dilemma: Rapidly Evolving Technology and Stagnant Processes

    Science.gov (United States)

    2010-08-01

    information technology systems. The current DoDI 5000.02 leaves IT project and program managers wondering how the current process applies to them, as the guidance is fairly rigid and does not allow for the flexibility required to appropriately manage IT programs. Until very recently, in comparison to the development of a traditional weapons system, IT programs seemed to have been viewed as a utility or service instead of a critical component to national security. Perhaps that is because data passing through cables cannot be observed with the naked senses and therefore an

  14. Evaluating NASA Technology Programs in Terms of Private Sector Impacts

    Science.gov (United States)

    Greenberg, J. S.

    1984-01-01

    NASA is currently developing spacecraft technology for application to NASA scientific missions, military missions and commercial missions which are part of or form the basis of private sector business ventures. The justification of R&D programs that lead to spacecraft technology improvements encompasses the establishment of the benefits in terms of improved scientific knowledge that may result from new and/or improved NASA science missions, improved cost effectiveness of NASA and DOD missions and new or improved services that may be offered by the private sector (for example communications satellite services). It is with the latter of these areas that attention will be focused upon. In particular, it is of interest to establish the economic value of spacecraft technology improvements to private sector communications satellite business ventures. It is proposed to assess the value of spacecraft technology improvements in terms of the changes in cash flow and present value of cash flows, that may result from the use of new and/or improved spacecraft technology for specific types of private sector communications satellite missions (for example domestic point-to-point communication or direct broadcasting). To accomplish this it is necessary to place the new and/or improved technology within typical business scenarios and estimate the impacts of technical performance upon business and financial performance.

  15. Program status 3. quarter -- FY 1994: ITER and technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-07-19

    During this quarter all technical work and documentation of the PULSAR design was completed. They also assisted UCLA in the planning of the DEMO program.In the area of RF technology, a decision was made to fabricate 4in x 4in gyrotron distributed window. An finally, they obtained good agreement between code predictions and measured data for the up and down field redeposition of tungsten in the DIMES-8 experiment.

  16. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A.

    2012-09-28

    The purpose of the project described in this report is to identify and document the commercial and emerging (projected to be commercialized within the next 3 years) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies (FCT) Program in the Office of Energy Efficiency and Renewable Energy (EERE). Pacific Northwest National Laboratory (PNNL) undertook two efforts simultaneously to accomplish this project. The first effort was a patent search and analysis to identify patents related to hydrogen and fuel cells that are associated with FCT-funded projects (or projects conducted by DOE-EERE predecessor programs) and to ascertain the patents’ current status, as well as any commercial products that may have used the technology documented in the patent. The second effort was a series of interviews with current and past FCT personnel, a review of relevant program annual reports, and an examination of grants made under the Small Business Innovation Research and Small Business Technology Transfer Programs that are related to hydrogen and fuel cells.

  17. Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, Steven A.; Brown, Scott A.

    2011-09-29

    The purpose of the project described in this report is to identify and document the commercial and emerging (projected to be commercialized within the next 3 years) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies (FCT) Program in the Office of Energy Efficiency and Renewable Energy (EERE). To do this, Pacific Northwest National Laboratory (PNNL) undertook two efforts simultaneously to accomplish this project. The first effort was a patent search and analysis to identify hydrogen- and fuel-cell-related patents that are associated with FCT-funded projects (or projects conducted by DOE-EERE predecessor programs) and to ascertain the patents current status, as well as any commercial products that may have used the technology documented in the patent. The second effort was a series of interviews with current and past FCT personnel, a review of relevant program annual reports, and an examination of hydrogen- and fuel-cell-related grants made under the Small Business Innovation Research and Small Business Technology Transfer Programs, and within the FCT portfolio.

  18. Technology Roadmap Research Program for the Steel Industry

    Energy Technology Data Exchange (ETDEWEB)

    Joseph R. Vehec

    2010-12-30

    The steel industry's Technology Roadmap Program (TRP) is a collaborative R&D effort jointly sponsored by the steel industry and the United States Department of Energy. The TRP program was designed to develop new technologies to save energy , increase competitiveness, and improve the environment. TRP ran from July, 1997 to December, 2008, with a total program budget of $38 million dollars. During that period 47 R&D projects were performed by 28 unique research organizations; co-funding was provided by DOE and 60 industry partners. The projects benefited all areas of steelmaking and much know-how was developed and transferred to industry. The American Iron and Steel Institute is the owner of all intellectual property developed under TRP and licenses it at commercial rates to all steelmakers. TRP technologies are in widespread use in the steel industry as participants received royalty-free use of intellectual property in return for taking the risk of funding this research.

  19. Status of the DOE Battery and Electrochemical Technology Program V

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, R.

    1985-06-01

    The program consists of two activities, Technology Base Research (TBR) managed by the Lawrence Berkeley Laboratory (LBL) and Exploratory Technology Development and Testing (EDT) managed by the Sandia National Laboratories (SNL). The status of the Battery Energy Storage Test (BEST) Facility is presented, including the status of the batteries to be tested. ECS program contributions to the advancement of the lead-acid battery and specific examples of technology transfer from this program are given. The advances during the period December 1982 to June 1984 in the characterization and performance of the lead-acid, iron/nickel-oxide, iron/air, aluminum/air, zinc/bromide, zinc/ferricyanide, and sodium/sulfur batteries and in fuel cells for transport are summarized. Novel techniques and the application of established techniques to the study of electrode processes, especially the electrode/electrolyte interface, are described. Research with the potential of leading to improved ceramic electrolytes and positive electrode container and current-collectors for the sodium/sulfur battery is presented. Advances in the electrocatalysis of the oxygen (air) electrode and the relationship of these advances to the iron/air and aluminum/air batteries and to the fuel cell are noted. The quest for new battery couples and battery materials is reviewed. New developments in the modeling of electrochemical cell and electrode performance with the approaches to test these models are reported.

  20. Status of the DOE Battery and Electrochemical Technology Program 5

    Science.gov (United States)

    Roberts, R.

    1985-06-01

    The program consists of two activities, Technology Base Research (TBR) managed by the Lawrence Berkeley Laboratory (LBL) and Exploratory Technology Development and Testing (EDT) managed by the Sandia National Laboratories (SNL). The status of the Battery Energy Storage Test (BEST) Facility is presented, including the status of the batteries to be tested. ECS program contributions to the advancement of the lead-acid battery and specific examples of technology transfer from this program are given. The advances during the period December 1982 to June 1984 in the characterization and performance of the lead-acid, iron/nickel-oxide, iron/air, aluminum/air, zinc/bromide, zinc/ferricyanide, and sodium/sulfur batteries and in fuel cells for transport are summarized. Novel techniques and the application of established techniques to the study of electrode processes, especially the electrode/electrolyte interface, are described. Research with the potential of leading to improved ceramic electrolytes and positive electrode container and current-collectors for the sodium/sulfur battery is presented. Advances in the electrocatalysis of the oxygen (air) electrode and the relationship of these advances to the iron/air and aluminum/air batteries and to the fuel cell are noted. The quest for new battery couples and battery materials is reviewed. New developments in the modeling of electrochemical cell and electrode performance with the approaches to test these models are reported.

  1. Status of the DOE Battery and Electrochemical Technology Program V

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, R.

    1985-06-01

    The program consists of two activities, Technology Base Research (TBR) managed by the Lawrence Berkeley Laboratory (LBL) and Exploratory Technology Development and Testing (EDT) managed by the Sandia National Laboratories (SNL). The status of the Battery Energy Storage Test (BEST) Facility is presented, including the status of the batteries to be tested. ECS program contributions to the advancement of the lead-acid battery and specific examples of technology transfer from this program are given. The advances during the period December 1982 to June 1984 in the characterization and performance of the lead-acid, iron/nickel-oxide, iron/air, aluminum/air, zinc/bromide, zinc/ferricyanide, and sodium/sulfur batteries and in fuel cells for transport are summarized. Novel techniques and the application of established techniques to the study of electrode processes, especially the electrode/electrolyte interface, are described. Research with the potential of leading to improved ceramic electrolytes and positive electrode container and current-collectors for the sodium/sulfur battery is presented. Advances in the electrocatalysis of the oxygen (air) electrode and the relationship of these advances to the iron/air and aluminum/air batteries and to the fuel cell are noted. The quest for new battery couples and battery materials is reviewed. New developments in the modeling of electrochemical cell and electrode performance with the approaches to test these models are reported.

  2. Research on XML-based Application Layer Data Exchange Technology%基于XML的应用层数据交换技术的研究

    Institute of Scientific and Technical Information of China (English)

    尹建璋

    2009-01-01

    目前,许多企业已着力建立各种计算机应用以助于商业运营.虽然这带来了效率的显著提高,但它并没有扩展到企业外部的业务.这些业务涵盖不同公司企业应用或商业运营的交换和交流.很多情况下企业与它们的商业伙伴、供货商和客户存在信息孤岛.企业间以及它们与其商业伙伴间的交流仍旧是依赖人工处理,因此效率很低.电子数据交换(EDI)被认为是这一问题的解决方案,而应用层数据交换技术是该方案的重中之重,因此,本文主要对电子数据交换技术中的XML应用层数据交换技术进行研究.%At present, many enterprises have been efforts to establish a variety of computer applications in order to help business operators. While that has had a significant improvement in the efficiency, but it does not extend to companies outside the business. These businesses cover a variety of companies applications or business operations of the exchange and communication. Many cases, enterprises and their business partners, suppliers and customers there are islands of information. Between enterprises and their business partners and their exchanges are still dependent on manual processing, so efficiency is very low. Electronic Data Interchange (EDI) is considered to be the solution to this problem, and the application layer data exchange technology is the top priority of the program, this paper studies the electronic data exchange technology in application-level XML data exchange technology.

  3. Bioenergy Technologies Office Multi-Year Program Plan. March 2016

    Energy Technology Data Exchange (ETDEWEB)

    Schwab, Amy [Bioenergy Technologies Office, Washington, DC (United States)

    2016-03-01

    The Bioenergy Technologies Office is one of the 10 technology development offices within the Office of Energy Efficiency and Renewable Energy at the U.S. Department of Energy. This Multi-Year Program Plan (MYPP) sets forth the goals and structure of the Bioenergy Technologies Office (the Office). It identifies the research, development, and demonstration (RD&D), and market transformation and crosscutting activities the Office will focus on over the next five years and outlines why these activities are important to meeting the energy and sustainability challenges facing the nation. This MYPP is intended for use as an operational guide to help the Office manage and coordinate its activities, as well as a resource to help communicate its mission and goals to stakeholders and the public.

  4. Standards, building codes, and certification programs for solar technology applicatons

    Energy Technology Data Exchange (ETDEWEB)

    Riley, J. D.; Odland, R.; Barker, H.

    1979-07-01

    This report is a primer on solar standards development. It explains the development of standards, building code provisions, and certification programs and their relationship to the emerging solar technologies. These areas are important in the commercialization of solar technology because they lead to the attainment of two goals: the development of an industry infrastructure and consumer confidence. Standards activities in the four phases of the commercialization process (applied research, development, introduction, and diffusion) are discussed in relation to institutional issues. Federal policies have been in operation for a number of years to accelerate the development process for solar technology. These policies are discussed in light of the Office of Management and Budget (OMB) Circular on federal interaction with the voluntary consensus system, and in light of current activities of DOE, HUD, and other interested federal agencies. The appendices cover areas of specific interest to different audiences: activities on the state and local level; and standards, building codes, and certification programs for specific technologies. In addition, a contract for the development of a model solar document let by DOE to a model consortium is excerpted in the Appendix.

  5. Nuclear Technology Programs semiannual progress report, October 1988--March 1989

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E. [ed.

    1990-12-01

    This document reports on the work done by the Nuclear Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period October 1988--March 1989. These programs involve R&D in three areas: applied physical chemistry, separation science and technology, and nuclear waste management. The work in applied physical chemistry includes investigations into the processes that control the release and transport of fission products under accident-like conditions, the thermophysical properties of metal fuel and blanket materials of the Integral Fast Reactor, and the properties of selected materials in environments simulating those of fusion energy systems. In the area of separation science and technology, the bulk of the effort is concerned with developing and implementing processes for the removal and concentration of actinides from waste streams contaminated by transuranic elements. Another effort is concerned with examining the feasibility of substituting low-enriched for high-enriched uranium in the production of fission product {sup 99}Mo. In the area of waste management, investigations are underway on the performance of materials in projected nuclear repository conditions to provide input to the licensing of the nation`s high-level waste repositories. 127 refs., 76 figs., 103 tabs.

  6. Nuclear Technology Programs semiannual progress report, April-- September 1990

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E. (ed.)

    1992-06-01

    This document reports on the work done by the Nuclear Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period April--September 1990. These programs involve R D in three areas: applied physical chemistry, separation science and technology, and nuclear waste management. The work in applied physical chemistry includes investigations into the processes that control the release and transport of fission products under accident-like conditions in a light water reactor, the thermophysical properties of the metal fuel in the Integral Fast Reactor, and the properties of selected materials in environments simulating those of fusion energy systems. In the area of separation science and technology, the bulk of the effort is concerned with developing and implementing processes for the removal and concentration of actinides from waste streams contaminated by transuranic elements. In the area of waste management, investigations are underway on the performance of materials in projected nuclear repository conditions to provide input to the licensing of the nation's high-level waste repositories.

  7. Nuclear Technology Programs semiannual progress report, April-- September 1990

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E. [ed.

    1992-06-01

    This document reports on the work done by the Nuclear Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period April--September 1990. These programs involve R&D in three areas: applied physical chemistry, separation science and technology, and nuclear waste management. The work in applied physical chemistry includes investigations into the processes that control the release and transport of fission products under accident-like conditions in a light water reactor, the thermophysical properties of the metal fuel in the Integral Fast Reactor, and the properties of selected materials in environments simulating those of fusion energy systems. In the area of separation science and technology, the bulk of the effort is concerned with developing and implementing processes for the removal and concentration of actinides from waste streams contaminated by transuranic elements. In the area of waste management, investigations are underway on the performance of materials in projected nuclear repository conditions to provide input to the licensing of the nation`s high-level waste repositories.

  8. Nuclear technology programs. Semiannual progress report, April--September 1991

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    This document reports on the work done by the Nuclear Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period April through September 1991. These programs involve R & D in three areas: applied physical chemistry, separation science and technology, and nuclear waste management. The work in applied physical chemistry includes investigations into the processes that control the release and transport of fission products under accident-like conditions in a light water reactor, the thermophysical properties of the metal fuel in the Integral Fast Reactor, and the properties of selected materials in environments simulating those of fusion energy systems. In the area of separation science and technology, the bulk of the effort is concerned with developing and implementing processes for the removal and concentration of actinides from waste streams contaminated by transuranic elements. In the area of waste management, investigations are underway on the performance of materials in projected nuclear repository conditions to provide input to the licensing of the nation`s high-level waste repositories.

  9. Nuclear technology programs; Semiannual progress report, October 1989--March 1990

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E. [ed.

    1992-01-01

    This document reports on the work done by the Nuclear Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period October 1989--March 1990. These programs involve R&D in three areas: applied physical chemistry, separation science and technology, and nuclear waste management. The work in applied physical chemistry includes investigations into the processes that control the release and transport of fission products under accident-like conditions, the thermophysical properties of metal fuel and blanket materials of the Integral Fast Reactor, and the properties of selected materials in environments simulating those of fusion energy systems. In the area of separation science and technology, the bulk of the effort is concerned with developing and implementing processes for the removal and concentration of actinides from waste streams contaminated by transuranic elements. Another effort is concerned water waste stream generated in production of 2,4,6-trinitrotoluene. In the area of waste management, investigations are underway on the performance of materials in projected nuclear repository conditions to provide input to the licensing of the nation`s high-level waste repositories.

  10. Nuclear Technology Programs semiannual progress report, October 1990--March 1991

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-12-01

    This document reports on the work done by the Nuclear Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period October 1990--March 1991. These programs involve R&D in three areas: applied physical chemistry, separation science and technology, and nuclear waste management. The work in applied physical chemistry includes investigations into the processes that control the release and transpose of fission products under accident-like conditions in a light water reactor, the thermophysical properties of the metal fuel in the Integral Fast Reactor, and the properties of selected materials in environments simulating those of fusion energy systems. In the area of separation science and technology, the bulk of the effort is concerned with developing and implementing processes for the removal and concentration of actinides from waste streams contaminated by transuranic elements. In the area of waste management, investigations are underway on the performance of materials in projected nuclear repository conditions to provide input to the licensing of the nation`s high-level waste repositories.

  11. Long-Term Stewardship Program Science and Technology Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Joan McDonald

    2002-09-01

    Many of the United States’ hazardous and radioactively contaminated waste sites will not be sufficiently remediated to allow unrestricted land use because funding and technology limitations preclude cleanup to pristine conditions. This means that after cleanup is completed, the Department of Energy will have long-term stewardship responsibilities to monitor and safeguard more than 100 sites that still contain residual contamination. Long-term stewardship encompasses all physical and institutional controls, institutions, information, and other mechanisms required to protect human health and the environment from the hazards remaining. The Department of Energy Long-Term Stewardship National Program is in the early stages of development, so considerable planning is still required to identify all the specific roles and responsibilities, policies, and activities needed over the next few years to support the program’s mission. The Idaho National Engineering and Environmental Laboratory was tasked with leading the development of Science and Technology within the Long-Term Stewardship National Program. As part of that role, a task was undertaken to identify the existing science and technology related requirements, identify gaps and conflicts that exist, and make recommendations to the Department of Energy for future requirements related to science and technology requirements for long-term stewardship. This work is summarized in this document.

  12. NASA Radioisotope Power System Program - Technology and Flight Systems

    Science.gov (United States)

    Sutliff, Thomas J.; Dudzinski, Leonard A.

    2009-01-01

    NASA sometimes conducts robotic science missions to solar system destinations for which the most appropriate power source is derived from thermal-to-electrical energy conversion of nuclear decay of radioactive isotopes. Typically the use of a radioisotope power system (RPS) has been limited to medium and large-scale missions, with 26 U,S, missions having used radioisotope power since 1961. A research portfolio of ten selected technologies selected in 2003 has progressed to a point of maturity, such that one particular technology may he considered for future mission use: the Advanced Stirling Converter. The Advanced Stirling Radioisotope Generator is a new power system in development based on this Stirling cycle dynamic power conversion technology. This system may be made available for smaller, Discovery-class NASA science missions. To assess possible uses of this new capability, NASA solicited and funded nine study teams to investigate unique opportunities for exploration of potential destinations for small Discovery-class missions. The influence of the results of these studies and the ongoing development of the Advanced Stirling Radioisotope Generator system are discussed in the context of an integrated Radioisotope Power System program. Discussion of other and future technology investments and program opportunities are provided.

  13. Advanced Materials Development Program: Ceramic Technology for Advanced Heat Engines program plan, 1983--1993

    Energy Technology Data Exchange (ETDEWEB)

    1990-07-01

    The purpose of the Ceramic Technology for Advanced Heat Engines (CTAHE) Project is the development of an industrial technology base capable of providing reliable and cost-effective high temperature ceramic components for application in advanced heat engines. There is a deliberate emphasis on industrial'' in the purpose statement. The project is intended to support the US ceramic and engine industries by providing the needed ceramic materials technology. The heat engine programs have goals of component development and proof-of-concept. The CTAHE Project is aimed at developing generic basic ceramic technology and does not involve specific engine designs and components. The materials research and development efforts in the CTAHE Project are focused on the needs and general requirements of the advanced gas turbine and low heat rejection diesel engines. The CTAHE Project supports the DOE Office of Transportation Systems' heat engine programs, Advanced Turbine Technology Applications (ATTAP) and Heavy Duty Transport (HDT) by providing the basic technology required for development of reliable and cost-effective ceramic components. The heat engine programs provide the iterative component design, fabrication, and test development logic. 103 refs., 18 figs., 11 tabs.

  14. Germany-US Nuclear Theory Exchange Program for QCD Studies of Hadrons & Nuclei 'GAUSTEQ'

    Energy Technology Data Exchange (ETDEWEB)

    Dudek, Jozef [Old Dominion Univ., Norfolk, VA (United States); Melnitchouk, Wally [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

    2016-03-07

    GAUSTEQ was a Germany-U.S. exchange program in nuclear theory whose purpose was to focus research efforts on QCD studies of hadrons and nuclei, centered around the current and future research programs of Jefferson Lab and the Gesellschaft fur Schwerionenforschung (GSI) in Germany. GAUSTEQ provided travel support for theoretical physicists at US institutions conducting collaborative research with physicists in Germany. GSI (with its Darmstadt and Helmholtz Institute Mainz braches) served as the German “hub” for visits of U.S. physicists, while Jefferson Lab served as the corresponding “hub” for visits of German physicists visiting U.S. institutions through the reciprocal GUSTEHP (German-US Theory Exchange in Hadron Physics) program. GAUSTEQ was funded by the Office of Nuclear Physics of the U.S. Department of Energy, under Contract No.DE-SC0006758 and officially managed through Old Dominion University in Norfolk, Virginia. The program ran between 2011 and 2015.

  15. Building bridges: qualitative assessment of a clinical faculty exchange between a naturopathic and an allopathic medical training program.

    Science.gov (United States)

    McCarty, Rachelle L; Fenn, Robin; Gaster, Barak; Weber, Wendy; Guiltinan, Jane

    2011-01-01

    What are the perceived benefits of a clinical exchange experience designed as part of a program to promote acceptance and use of evidence-based medicine (EBM) in naturopathic clinical practice? Nine faculty members participated in a focus group (n = 6) or a structured interview (n = 3) to assess experience in the program. Investigators independently analyzed transcribed notes for common experience themes. ANALYSIS AND INTERPRETATION: Six major themes emerged: integrating EBM into naturopathic clinical teaching, strengthening of professional relationships, exposure to clinical experiences outside the usual naturopathic scope, reaffirmation of naturopathic training and profession, observation of clinical and administrative resources and practices, and recommendations for future clinical exchanges. A clinical exchange experience was viewed as a favorable way to promote EBM appreciation within the complementary and alternative medicine educational community and to foster improved clinical experiences for faculty and their students and patients. Copyright © 2011 Elsevier Inc. All rights reserved.

  16. Interprofessional student education: exchange program between Albert Einstein College of Medicine and Pacific College of Oriental Medicine.

    Science.gov (United States)

    Anderson, Belinda J; Herron, Patrick D; Downie, Sherry A; Myers, Daniel C; Milan, Felise B; Olson, Todd R; Kligler, Ben E; Sierpina, Victor S; Kreitzer, Mary Jo

    2012-01-01

    The growing popularity of complementary and alternative medicine (CAM), of which estimated 38% of adults in the United States used in 2007, has engendered changes in medical school curricula to increase students' awareness of it. Exchange programs between conventional medical schools and CAM institutions are recognized as an effective method of interprofessional education. The exchange program between Albert Einstein College of Medicine (Einstein, Yeshiva University) and Pacific College of Oriental Medicine, New York campus (PCOM-NY) is in its fifth year and is part of a broader relationship between the schools encompassing research, clinical training, interinstitutional faculty and board appointments, and several educational activities. The Einstein/PCOM-NY student education exchange program is part of the Einstein Introduction to Clinical Medicine Program and involves students from Einstein learning about Chinese medicine through a lecture, the experience of having acupuncture, and a four-hour preceptorship at the PCOM outpatient clinic. The students from PCOM learn about allopathic medicine training through an orientation lecture, a two-and-a-half-hour dissection laboratory session along side Einstein student hosts, and a tour of the clinical skills center at the Einstein campus. In the 2011/2012 offering of the exchange program, the participating Einstein and PCOM students were surveyed to assess the educational outcomes. The data indicate that the exchange program was highly valued by all students and provided a unique learning experience. Survey responses from the Einstein students indicated the need for greater emphasis on referral information, which has been highlighted in the literature as an important medical curriculum integrative medicine competency.

  17. Building Technological Capability within Satellite Programs in Developing Countries

    Science.gov (United States)

    Wood, Danielle Renee

    Global participation in space activity is growing as satellite technology matures and spreads. Countries in Africa, Asia and Latin America are creating or reinvigorating national satellite programs. These countries are building local capability in space through technological learning. They sometimes pursue this via collaborative satellite development projects with foreign firms that provide training. This phenomenon of collaborative satellite development projects is poorly understood by researchers of technological learning and technology transfer. The approach has potential to facilitate learning, but there are also challenges due to misaligned incentives and the tacit nature of the technology. Perspectives from literature on Technological Learning, Technology Transfer, Complex Product Systems and Product Delivery provide useful but incomplete insight for decision makers in such projects. This work seeks a deeper understanding of capability building through collaborative technology projects by conceiving of the projects as complex, socio-technical systems with architectures. The architecture of a system is the assignment of form to execute a function along a series of dimensions. The research questions explore the architecture of collaborative satellite projects, the nature of capability building during such projects, and the relationship between architecture and capability building. The research design uses inductive, exploratory case studies to investigate six collaborative satellite development projects. Data collection harnesses international field work driven by interviews, observation, and documents. The data analysis develops structured narratives, architectural comparison and capability building assessment. The architectural comparison reveals substantial variation in project implementation, especially in the areas of project initiation, technical specifications of the satellite, training approaches and the supplier selection process. The individual

  18. Evaluation of spacecraft technology programs (effects on communication satellite business ventures), volume 2

    Science.gov (United States)

    Greenburg, J. S.; Kaplan, M.; Fishman, J.; Hopkins, C.

    1985-01-01

    The computational procedures used in the evaluation of spacecraft technology programs that impact upon commercial communication satellite operations are discussed. Computer programs and data bases are described.

  19. Programmed protection of foreign DNA from restriction allows pathogenicity island exchange during pneumococcal transformation.

    Directory of Open Access Journals (Sweden)

    Calum Johnston

    2013-02-01

    Full Text Available In bacteria, transformation and restriction-modification (R-M systems play potentially antagonistic roles. While the former, proposed as a form of sexuality, relies on internalized foreign DNA to create genetic diversity, the latter degrade foreign DNA to protect from bacteriophage attack. The human pathogen Streptococcus pneumoniae is transformable and possesses either of two R-M systems, DpnI and DpnII, which respectively restrict methylated or unmethylated double-stranded (ds DNA. S. pneumoniae DpnII strains possess DpnM, which methylates dsDNA to protect it from DpnII restriction, and a second methylase, DpnA, which is induced during competence for genetic transformation and is unusual in that it methylates single-stranded (ss DNA. DpnA was tentatively ascribed the role of protecting internalized plasmids from DpnII restriction, but this seems unlikely in light of recent results establishing that pneumococcal transformation was not evolved to favor plasmid exchange. Here we validate an alternative hypothesis, showing that DpnA plays a crucial role in the protection of internalized foreign DNA, enabling exchange of pathogenicity islands and more generally of variable regions between pneumococcal isolates. We show that transformation of a 21.7 kb heterologous region is reduced by more than 4 logs in dpnA mutant cells and provide evidence that the specific induction of dpnA during competence is critical for full protection. We suggest that the integration of a restrictase/ssDNA-methylase couplet into the competence regulon maintains protection from bacteriophage attack whilst simultaneously enabling exchange of pathogenicicy islands. This protective role of DpnA is likely to be of particular importance for pneumococcal virulence by allowing free variation of capsule serotype in DpnII strains via integration of DpnI capsule loci, contributing to the documented escape of pneumococci from capsule-based vaccines. Generally, this finding is the

  20. 22 CFR 3.12 - Exemption of grants and other foreign government assistance in cultural exchange programs from...

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Exemption of grants and other foreign government assistance in cultural exchange programs from coverage of foreign gifts and decorations legislation. 3.12 Section 3.12 Foreign Relations DEPARTMENT OF STATE GENERAL GIFTS AND DECORATIONS FROM FOREIGN GOVERNMENTS § 3.12 Exemption of grants and...

  1. Ion Exchange Technology Development in Support of the Urine Processor Assembly Precipitation Prevention Project for the International Space Station

    Science.gov (United States)

    Mitchell, Julie L.; Broyan, James L.; Pickering, Karen D.; Adam, Niklas; Casteel, Michael; Callahan, Michael; Carrier, Chris

    2012-01-01

    In support of the Urine Processor Assembly Precipitation Prevention Project (UPA PPP), multiple technologies were explored to prevent CaSO4 2H2O (gypsum) precipitation during the on-orbit distillation process. Gypsum precipitation currently limits the water recovery rate onboard the International Space Station (ISS) to 70% versus the planned 85% target water recovery rate. Due to its ability to remove calcium cations in pretreated augmented urine (PTAU), ion exchange was selected as one of the technologies for further development by the PPP team. A total of 13 ion exchange resins were evaluated in various equilibrium and dynamic column tests with solutions of dissolved gypsum, urine ersatz, PTAU, and PTAU brine at 85% water recovery. While initial evaluations indicated that the Purolite SST60 resin had the highest calcium capacity in PTAU (0.30 meq/mL average), later tests showed that the Dowex G26 and Amberlite FPC12H resins had the highest capacity (0.5 meq/mL average). Testing at the Marshall Spaceflight Center (MSFC) integrates the ion exchange technology with a UPA ground article under flight-like pulsed flow conditions with PTAU. To date, no gypsum precipitation has taken place in any of the initial evaluations.

  2. Hybrid Propulsion Technology Program, phase 1. Volume 1: Executive summary

    Science.gov (United States)

    1989-01-01

    The study program was contracted to evaluate concepts of hybrid propulsion, select the most optimum, and prepare a conceptual design package. Further, this study required preparation of a technology definition package to identify hybrid propulsion enabling technologies and planning to acquire that technology in Phase 2 and demonstrate that technology in Phase 3. Researchers evaluated two design philosophies for Hybrid Rocket Booster (HRB) selection. The first is an ASRM modified hybrid wherein as many components/designs as possible were used from the present Advanced Solid Rocket Motor (ASRM) design. The second was an entirely new hybrid optimized booster using ASRM criteria as a point of departure, i.e., diameter, thrust time curve, launch facilities, and external tank attach points. Researchers selected the new design based on the logic of optimizing a hybrid booster to provide NASA with a next generation vehicle in lieu of an interim advancement over the ASRM. The enabling technologies for hybrid propulsion are applicable to either and vehicle design may be selected at a downstream point (Phase 3) at NASA's discretion. The completion of these studies resulted in ranking the various concepts of boosters from the RSRM to a turbopump fed (TF) hybrid. The scoring resulting from the Figure of Merit (FOM) scoring system clearly shows a natural growth path where the turbopump fed solid liquid staged combustion hybrid provides maximized payload and the highest safety, reliability, and low life cycle costing.

  3. Ka-band MMIC subarray technology program (Ka-Mist)

    Science.gov (United States)

    Pottinger, W.

    1995-09-01

    Ka-band monolithic microwave integrated circuit (MMIC) arrays have been considered as having high potential for increasing the capability of space, aircraft, and land mobile communication systems in terms of scan performance, data rate, link margin, and flexibility while offering a significant reduction in size, weight, and power consumption. Insertion of MMIC technology into antenna systems, particularly at millimeter wave frequencies using low power and low noise amplifiers in closed proximity to the radiating elements, offers a significant improvement in the array transmit efficiency, receive system noise figure, and overall array reliability. Application of active array technology also leads to the use of advanced beamforming techniques that can improve beam agility, diversity, and adaptivity to complex signal environments. The objective of this program was to demonstrate the technical feasibility of the 'tile' array packaging architecture at EHF via the insertion of 1990 MMIC technology into a functional tile array or subarray module. The means test of this objective was to demonstrate and deliver to NASA a minimum of two 4 x 4 (16 radiating element) subarray modules operating in a transmit mode at 29.6 GHz. Available (1990) MMIC technology was chosen to focus the program effort on the novel interconnect schemes and packaging requirements rather than focusing on MMIC development. Major technical achievements of this program include the successful integration of two 4 x 4 subarray modules into a single antenna array. This 32 element array demonstrates a transmit EIRP of over 300 watts yielding an effective directive power gain in excess of 55 dB at 29.63 GHz. The array has been actively used as the transmit link in airborne/terrestrial mobile communication experiments accomplished via the ACTS satellite launched in August 1993.

  4. Overview of the Defense Programs Research and Technology Development Program for fiscal year 1993. Appendix II research laboratories and facilities

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-30

    This document contains summaries of the research facilities that support the Defense Programs Research and Technology Development Program for FY 1993. The nine program elements are aggregated into three program clusters as follows: (1) Advanced materials sciences and technologies; chemistry and materials, explosives, special nuclear materials (SNM), and tritium. (2) Design sciences and advanced computation; physics, conceptual design and assessment, and computation and modeling. (3) Advanced manufacturing technologies and capabilities; system engineering science and technology, and electronics, photonics, sensors, and mechanical components. Section I gives a brief summary of 23 major defense program (DP) research and technology facilities and shows how these major facilities are organized by program elements. Section II gives a more detailed breakdown of the over 200 research and technology facilities being used at the Laboratories to support the Defense Programs mission.

  5. Apollo Program Summary Report: Synopsis of the Apollo Program Activities and Technology for Lunar Exploration

    Science.gov (United States)

    1975-01-01

    Overall program activities and the technology developed to accomplish lunar exploration are discussed. A summary of the flights conducted over an 11-year period is presented along with specific aspects of the overall program, including lunar science, vehicle development and performance, lunar module development program, spacecraft development testing, flight crew summary, mission operations, biomedical data, spacecraft manufacturing and testing, launch site facilities, equipment, and prelaunch operations, and the lunar receiving laboratory. Appendixes provide data on each of the Apollo missions, mission type designations, spacecraft weights, records achieved by Apollo crewmen, vehicle histories, and a listing of anomalous hardware conditions noted during each flight beginning with Apollo 4.

  6. International exchange project for the engineer exchange project (in coal mine technology area) in fiscal 1998. Overseas workshop; 1998 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kaigai workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The international exchange project for the engineer exchange project (in coal mine technology area) in fiscal 1998, the 'Overseas workshop' has performed exchange in technologies with Australian coal mine engineers. The project refers to the Australian technological levels and needs in coal production, safety control and environment, as well as transfer of the Japanese coal mine technologies. This report summarizes the result of a survey on the engineer exchange project in the coal mine technology area and the possibility of joint researches. The 'overseas workshop' was held in November 1998 for two days in Brisbane City in QLD Province as the 'Japan-Australia coal technology workshop'. The 'Japan-Australia coal technology workshop' gave lectures in five sessions (the basic lecture, Japan-Australia high-speed excavation project, coal mine gas control project, exploration and resources, and development and experience of Japan). It also discussed two themes (mine safety management and rules, and greenhouse effect gases and coal mining). Two coal mines were visited thereafter to deepen the exchange with the Australian coal mine engineers. (NEDO)

  7. A model technology transfer program for independent operators: Kansas Technology Transfer Model (KTTM)

    Energy Technology Data Exchange (ETDEWEB)

    Schoeling, L.G.

    1993-09-01

    This report describes the development and testing of the Kansas Technology Transfer Model (KTTM) which is to be utilized as a regional model for the development of other technology transfer programs for independent operators throughout oil-producing regions in the US. It describes the linkage of the regional model with a proposed national technology transfer plan, an evaluation technique for improving and assessing the model, and the methodology which makes it adaptable on a regional basis. The report also describes management concepts helpful in managing a technology transfer program. The original Tertiary Oil Recovery Project (TORP) activities, upon which the KTTM is based, were developed and tested for Kansas and have proved to be effective in assisting independent operators in utilizing technology. Through joint activities of TORP and the Kansas Geological Survey (KGS), the KTTM was developed and documented for application in other oil-producing regions. During the course of developing this model, twelve documents describing the implementation of the KTTM were developed as deliverables to DOE. These include: (1) a problem identification (PI) manual describing the format and results of six PI workshops conducted in different areas of Kansas, (2) three technology workshop participant manuals on advanced waterflooding, reservoir description, and personal computer applications, (3) three technology workshop instructor manuals which provides instructor material for all three workshops, (4) three technologies were documented as demonstration projects which included reservoir management, permeability modification, and utilization of a liquid-level acoustic measuring device, (5) a bibliography of all literature utilized in the documents, and (6) a document which describes the KTTM.

  8. 78 FR 48537 - Small Business Innovation Research and Small Business Technology Transfer Programs...

    Science.gov (United States)

    2013-08-08

    ... ADMINISTRATION Small Business Innovation Research and Small Business Technology Transfer Programs... Administration (SBA) is publishing the Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) program Commercialization Benchmark for the 11 participating agencies for public comment...

  9. IMPACTS. Industrial Technologies Program: Summary of Program Results for CY 2008

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2010-08-02

    The Impacts report summarizes benefits resulting from ITP-sponsored technologies, including energy savings, waste reduction, increased productivity, and lowered emissions. It also provides an overview of the activities of the Industrial Assessment Centers, BestPractices Program, and Combined Heat and Power efforts.

  10. Biomass Program 2007 Program Peer Review - Biodiesel and Other Technologies Summary

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2009-10-28

    This document discloses the comments provided by a review panel at the U.S. Department of Energy Office of the Biomass Program Peer Review held on November 15-16, 2007 in Baltimore, MD and the Biodiesel and Other Technologies, held on August 14th and 15th in Golden, Colorado.

  11. Science and technology disclosure in the state of Queretaro: Science and Technology for Children program

    Science.gov (United States)

    Contreras Flores, Rubén; Villeda Muñoz, Gabriel

    2007-03-01

    Science and technology disclosure is an integral part of our scientific work as researches; it is an induction process for children, young people and teachers of primary and secondary schools in the state of Queretaro. Education must be offered in a clear and objective way, it allows to the students apply the acquired knowledge to understand the world and improve his quality of life. Nowadays, the Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada of the Instituto Politecnico Nacional Unidad Queretaro (CICATA-IPN Queretaro) together with the Consejo de Ciencia y Tecnologia del Estado de Queretaro (CONCYTEQ) have implemented the "Science and Technology for Children" program (Ciencia y Tecnologia para Ninos - CTN), it allows to the educative sector obtain information through the CONCYTEQ web page. The fist stage of the program was the development of two subjects: the brochure titled "Petroleum, Nonrenewable Natural Resource that Moves the World" and the manual "Experiments of Physics". At the moment we are working with the second stage of the program, it is about the energy generation using renewable sources such as: geothermal, aeolian, solar and biomass. The CTN program allows to students and teachers to create conscience about the importance of the development of the science of technology in our country.

  12. Materials Development Program: Ceramic Technology Project bibliography, 1984--1992

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    The Ceramic Technology [for Advanced Heat Engines] Project was begun in 1983 to meet the ceramic materials needs of the companion DOE automotive engine program, the Advanced Gas Turbine (AGT) project, and the Heavy Duty Transport (low-heat-rejection, heavy-duty diesel) project. Goal is to develop an industry technology base for reliable and cost effective ceramics for applications in advanced automotive gas turbine and diesel engines. Research areas were identified following extensive input from industry and academia. Majority of research is done by industry (60%); work is also done at colleges and universities, in-house, and at other national laboratories and government agencies. In the beginning, reliability of ceramic components was the key issue. The reliability issues have largely been met and, at the present time, cost is the driving issue, especially in light of the highly cost-sensitive automotive market. Emphasis of the program has now been shifted toward developing cost-effective ceramic components for high-performance engines in the near-term. This bibliography is a compilation of publications done in conjunction with the Ceramic Technology Project since its beginning. Citations were obtained from reports done by participants in the project. We have tried to limit citations to those published and easily located. The end date of 1992 was selected.

  13. 34 CFR 400.9 - What additional requirements govern the Vocational and Applied Technology Education Programs?

    Science.gov (United States)

    2010-07-01

    ... Applied Technology Education Programs? 400.9 Section 400.9 Education Regulations of the Offices of the... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAMS-GENERAL PROVISIONS § 400.9 What additional requirements govern the Vocational and Applied Technology Education Programs? In addition to the Act,...

  14. 76 FR 35474 - UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On...

    Science.gov (United States)

    2011-06-17

    ..., Detroit, MI; UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including... Center, Technology Training Joint Programs Staff, Detroit, Michigan (TA-W-71,047) and Warren, Michigan..., Technology Training Joint Programs Staff. The Department has determined that these workers were...

  15. Graduate Automotive Technology Education (GATE) Program: Center of Automotive Technology Excellence in Advanced Hybrid Vehicle Technology at West Virginia University

    Energy Technology Data Exchange (ETDEWEB)

    Nigle N. Clark

    2006-12-31

    This report summarizes the technical and educational achievements of the Graduate Automotive Technology Education (GATE) Center at West Virginia University (WVU), which was created to emphasize Advanced Hybrid Vehicle Technology. The Center has supported the graduate studies of 17 students in the Department of Mechanical and Aerospace Engineering and the Lane Department of Computer Science and Electrical Engineering. These students have addressed topics such as hybrid modeling, construction of a hybrid sport utility vehicle (in conjunction with the FutureTruck program), a MEMS-based sensor, on-board data acquisition for hybrid design optimization, linear engine design and engine emissions. Courses have been developed in Hybrid Vehicle Design, Mobile Source Powerplants, Advanced Vehicle Propulsion, Power Electronics for Automotive Applications and Sensors for Automotive Applications, and have been responsible for 396 hours of graduate student coursework. The GATE program also enhanced the WVU participation in the U.S. Department of Energy Student Design Competitions, in particular FutureTruck and Challenge X. The GATE support for hybrid vehicle technology enhanced understanding of hybrid vehicle design and testing at WVU and encouraged the development of a research agenda in heavy-duty hybrid vehicles. As a result, WVU has now completed three programs in hybrid transit bus emissions characterization, and WVU faculty are leading the Transportation Research Board effort to define life cycle costs for hybrid transit buses. Research and enrollment records show that approximately 100 graduate students have benefited substantially from the hybrid vehicle GATE program at WVU.

  16. International fuel cycle and waste management technology exchange activities sponsored by the United States Department of Energy: FY 1982 evaluation report

    Energy Technology Data Exchange (ETDEWEB)

    Lakey, L.T.; Harmon, K.M.

    1983-02-01

    In FY 1982, DOE and DOE contractor personnel attended 40 international symposia and conferences on fuel reprocessing and waste management subjects. The treatment of high-level waste was the topic most often covered in the visits, with geologic disposal and general waste management also being covered in numerous visits. Topics discussed less frequently inlcude TRU/LLW treatment, airborne waste treatment, D and D, spent fuel handling, and transportation. The benefits accuring to the US from technology exchange activities with other countries are both tangible, e.g., design of equipment, and intangible, e.g., improved foreign relations. New concepts initiated in other countries, particularly those with sizable nuclear programs, are beginning to appear in US efforts in growing numbers. The spent fuel dry storage concept originating in the FRG is being considered at numerous sites. Similarly, the German handling and draining concepts for the joule-heated ceramic melter used to vitrify wastes are being incorporated in US designs. Other foreigh technologies applicable in the US include the slagging incinerator (Belgium), the SYNROC waste form (Australia), the decontamination experience gained in decommissioning the Eurochemic reprocessing plant (Belgium), the engineered surface storage of low- and intermediate-level waste (Belgium, FRG, France), the air-cooled storage of vitrified high-level waste (France, UK), waste packaging (Canada, FRG, Sweden), disposal in salt (FRG), disposal in granite (Canada, Sweden), and sea dumping (UK, Belgium, The Netherlands, Switzerland). These technologies did not necessarily originated or have been tried in the US but for various reasons are now being applied and extended in other countries. This growing nuclear technological base in other countires reduces the number of technology avenues the US need follow to develop a solid nuclear power program.

  17. SeedUSoon: A New Software Program to Improve Seed Stock Management and Plant Line Exchanges between Research Laboratories.

    Science.gov (United States)

    Charavay, Céline; Segard, Stéphane; Pochon, Nathalie; Nussaume, Laurent; Javot, Hélène

    2017-01-01

    Plant research is supported by an ever-growing collection of mutant or transgenic lines. In the past, a typical basic research laboratory would focus on only a few plant lines that were carefully isolated from collections of lines containing random mutations. The subsequent technological breakthrough in high-throughput sequencing, combined with novel and highly efficient mutagenesis techniques (including site-directed mutagenesis), has led to a recent exponential growth in plant line collections used by individual researchers. Tracking the generation and genetic properties of these genetic resources is thus becoming increasingly challenging for researchers. Another difficulty for researchers is controlling the use of seeds protected by a Material Transfer Agreement, as often only the original recipient of the seeds is aware of the existence of such documents. This situation can thus lead to difficult legal situations. Simultaneously, various institutions and the general public now demand more information about the use of genetically modified organisms (GMOs). In response, researchers are seeking new database solutions to address the triple challenge of research competition, legal constraints, and institutional/public demands. To help plant biology laboratories organize, describe, store, trace, and distribute their seeds, we have developed the new program SeedUSoon, with simplicity in mind. This software contains data management functions that allow the separate tracking of distinct mutations, even in successive crossings or mutagenesis. SeedUSoon reflects the biotechnological diversity of mutations and transgenes contained in any specific line, and the history of their inheritance. It can facilitate GMO certification procedures by distinguishing mutations on the basis of the presence/absence of a transgene, and by recording the technology used for their generation. Its interface can be customized to match the context and rules of any laboratory. In addition, Seed

  18. SeedUSoon: A New Software Program to Improve Seed Stock Management and Plant Line Exchanges between Research Laboratories

    Science.gov (United States)

    Charavay, Céline; Segard, Stéphane; Pochon, Nathalie; Nussaume, Laurent; Javot, Hélène

    2017-01-01

    Plant research is supported by an ever-growing collection of mutant or transgenic lines. In the past, a typical basic research laboratory would focus on only a few plant lines that were carefully isolated from collections of lines containing random mutations. The subsequent technological breakthrough in high-throughput sequencing, combined with novel and highly efficient mutagenesis techniques (including site-directed mutagenesis), has led to a recent exponential growth in plant line collections used by individual researchers. Tracking the generation and genetic properties of these genetic resources is thus becoming increasingly challenging for researchers. Another difficulty for researchers is controlling the use of seeds protected by a Material Transfer Agreement, as often only the original recipient of the seeds is aware of the existence of such documents. This situation can thus lead to difficult legal situations. Simultaneously, various institutions and the general public now demand more information about the use of genetically modified organisms (GMOs). In response, researchers are seeking new database solutions to address the triple challenge of research competition, legal constraints, and institutional/public demands. To help plant biology laboratories organize, describe, store, trace, and distribute their seeds, we have developed the new program SeedUSoon, with simplicity in mind. This software contains data management functions that allow the separate tracking of distinct mutations, even in successive crossings or mutagenesis. SeedUSoon reflects the biotechnological diversity of mutations and transgenes contained in any specific line, and the history of their inheritance. It can facilitate GMO certification procedures by distinguishing mutations on the basis of the presence/absence of a transgene, and by recording the technology used for their generation. Its interface can be customized to match the context and rules of any laboratory. In addition, Seed

  19. Implementing the Internationalization Promotion Program at Tomakomai National College of Technology

    Science.gov (United States)

    Nakano, Wataru; Ishikawa, Nozomi; Matsuda, Kanaho; Ono, Masatsugu

    We introduce the internationalization promotion program conducted in Tomakomai National College of Technology (TNCT) . In order for the students to improve their international understanding and communication skills, the program was undertaken by means of collaborative education and distance education. TNCT delegates consisting of 2 teachers, 6 students, an office staff, and an engineer were sent to New Zealand, and worked on a project in cooperation with faculty members of Eastern Institute of Technology, Hawke‧s Bay (EIT) . The students explored environmental issues through discussions with other international students. At the end of the two-week on-site project, they reported the result via a video conferencing system. Additionally, this system served as a medium for international exchange in an intercultural communication class. Since the most of the students did not go to NZ, it was a good opportunity for them to communicate with people overseas. We discuss the effectiveness of both the collaborative education on practical topics and the distance education using a video conferencing system.

  20. Challenges of implementating a doctoral program in an international exchange in Cuba through the lens of Kanter's empowerment theory.

    Science.gov (United States)

    Scanlan, Judith M; Abdul Hernandéz, C

    2014-08-01

    The literature in international education focuses primarily on the experiences of western students in developing countries, international students in western universities, the development of an educational program in a developing country, or internationalization of curricula in western universities. There is little in the literature that addresses the challenges students and participating faculty face when implementing a graduate program in a developing country. The purpose of this paper is to describe and analyze the challenges of implementing a doctoral program in an international exchange through the lens of Kanter's theory of empowerment. Recommendations to address these challenges will be made.

  1. Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH) program

    Science.gov (United States)

    Fayette, Daniel F.; Speicher, Patricia; Stoklosa, Mark J.; Evans, Jillian V.; Evans, John W.; Gentile, Mike; Pagel, Chuck A.; Hakim, Edward

    1993-01-01

    A joint military-commercial effort to evaluate multichip module (MCM) structures is discussed. The program, Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH), has been designed to identify the failure mechanisms that are possible in MCM structures. The RELTECH test vehicles, technical assessment task, product evaluation plan, reliability modeling task, accelerated and environmental testing, and post-test physical analysis and failure analysis are described. The information obtained through RELTECH can be used to address standardization issues, through development of cost effective qualification and appropriate screening criteria, for inclusion into a commercial specification and the MIL-H-38534 general specification for hybrid microcircuits.

  2. Technology needs for environmental restoration remedial action. Environmental Restoration Program

    Energy Technology Data Exchange (ETDEWEB)

    Watson, J.S.

    1992-11-01

    This report summarizes the current view of the most important technology needs for the US Department of Energy (DOE) facilities operated by Martin Marietta Energy Systems, Inc. These facilities are the Oak Ridge National Laboratory, the Oak Ridge K-25 Site, the Oak Ridge Y-12 Plant, the Paducah Gaseous Diffusion Plant, and the Portsmouth Gaseous Diffusion Plant. The sources of information used in this assessment were a survey of selected representatives of the Environmental Restoration (ER) programs at each facility, results from a questionnaire distributed by Geotech CWM, Inc., for DOE, and associated discussions with individuals from each facility. This is not a final assessment, but a brief look at an ongoing assessment; the needs will change as the plans for restoration change and, it is hoped, as some technical problems are solved through successful development programs.

  3. Aerosciences, Aero-Propulsion and Flight Mechanics Technology Development for NASA's Next Generation Launch Technology Program

    Science.gov (United States)

    Cockrell, Charles E., Jr.

    2003-01-01

    The Next Generation Launch Technology (NGLT) program, Vehicle Systems Research and Technology (VSR&T) project is pursuing technology advancements in aerothermodynamics, aeropropulsion and flight mechanics to enable development of future reusable launch vehicle (RLV) systems. The current design trade space includes rocket-propelled, hypersonic airbreathing and hybrid systems in two-stage and single-stage configurations. Aerothermodynamics technologies include experimental and computational databases to evaluate stage separation of two-stage vehicles as well as computational and trajectory simulation tools for this problem. Additionally, advancements in high-fidelity computational tools and measurement techniques are being pursued along with the study of flow physics phenomena, such as boundary-layer transition. Aero-propulsion technology development includes scramjet flowpath development and integration, with a current emphasis on hypervelocity (Mach 10 and above) operation, as well as the study of aero-propulsive interactions and the impact on overall vehicle performance. Flight mechanics technology development is focused on advanced guidance, navigation and control (GN&C) algorithms and adaptive flight control systems for both rocket-propelled and airbreathing vehicles.

  4. IEA/ETDE - Energy Technology Data Exchange - Providing a worldwide R and D Knowledge Base; IEA/ETDEWEB - World Energy Base

    Energy Technology Data Exchange (ETDEWEB)

    Aarniala, M. [Tekes, Helsinki (Finland); Tommila, P. [Ministry of Trade and Industry, Helsinki (Finland); Tolonen, E. [Helsinki Univ. of Technology, Espoo (Finland)

    2006-12-20

    ETDE is a multilateral information exchange program with sixteen countries participating: Brazil, Canada, Denmark, Finland, France, Germany, Korea ,Rep.of, Mexico, The Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom and United States. ETDE is considered an Implementing Agreement of the International Energy Agency (IEA). Information in the ETDE's database is available on the Web in the ETDEWEB orld Energy Base. The database contains energy R and D results, the environmental impact of energy production and use including climate, energy policy, coal, hydrocarbon and renewable energy technologies, energy efficiency information and much more. With ETDEWEB-World Energy Base, it is easier than ever to check on recent developments in various research areas (including some basic research), to see how countries deal with energy elated environmental and climate change issues and eventually find approaches to energy use, including policy and economic factors, alternative and renewable energy sources and conservation aspects. (orig.)

  5. IEA/ETDE- Energy Technology Data Exchange Providing a worldwide R and D Knowledge Base; IEA/ETDEWEB - World Energy Base

    Energy Technology Data Exchange (ETDEWEB)

    Aarniala, M. [Tekes, Helsinki (Finland); Tommila, P. [Ministry of Trade and Industry, Helsinki (Finland); Tolonen, E. [Helsinki Univ. of Technology, Espoo (Finland)

    2007-07-01

    ETDE is a multilateral information exchange program with sixteen countries participating: Brazil, Canada, Denmark, Finland, France, Germany, Korea, Rep.of, Mexico, The Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom and United States. ETDE is considered an Implementing Agreement of the International Energy Agency (IEA). Information in the ETDE's database is available on the Web in the ETDEWEB-World Energy Base. The database contains energy R and D results, the environmental impact of energy production and use including climate, energy policy, coal, hydrocarbon and renewable energy technologies, energy efficiency information and much more. With ETDEWEB-World Energy Base, it is easier than ever to check on recent developments in various research areas (including some basic research), to see how countries deal with energy-related environmental and climate change issues and eventually find approaches to energy use, including policy and economic factors, alternative and renewable energy sources and conservation aspects. (orig.)

  6. Milliken Clean Coal Technology Demonstration Project. Project performance summary, Clean Coal Technology Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2002-11-30

    The New York State Electric & Gas Corporation (NYSEG) demonstrated a combination of technologies at its Milliken Station in Lansing, New York, designed to: (1) achieve high sulfur dioxide (SO2) capture efficiency, (2) bring nitrogen oxide (NOx) emissions into compliance with Clean Air Act Amendments of 1990 (CAAA), (3) maintain high station efficiency, and (4) eliminate waste water discharge. This project is part of the U.S. Department of Energy's (DOE) Clean Coal Technology Demonstration Program (CCTDP) established to address energy and environmental concerns related to coal use. DOE sought cost-shared partnerships with industry through five nationally competed solicitations to accelerate commercialization of the most promising advance coal-based power generation and pollution control technologies. The CCTDP, valued at over five billion dollars, has significantly leveraged federal funding by forging effective partnerships founded on sound principles. For every federal dollar invested, CCTDP participants have invested two dollars. These participants include utilities, technology developers, state governments, and research organizations. The project presented here was one of nine selected in January 1991 from 33 proposals submitted in response to the program's fourth solicitation.

  7. Milliken Clean Coal Technology Demonstration Project. Project performance summary, Clean Coal Technology Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2002-11-30

    The New York State Electric & Gas Corporation (NYSEG) demonstrated a combination of technologies at its Milliken Station in Lansing, New York, designed to: (1) achieve high sulfur dioxide (SO2) capture efficiency, (2) bring nitrogen oxide (NOx) emissions into compliance with Clean Air Act Amendments of 1990 (CAAA), (3) maintain high station efficiency, and (4) eliminate waste water discharge. This project is part of the U.S. Department of Energy's (DOE) Clean Coal Technology Demonstration Program (CCTDP) established to address energy and environmental concerns related to coal use. DOE sought cost-shared partnerships with industry through five nationally competed solicitations to accelerate commercialization of the most promising advance coal-based power generation and pollution control technologies. The CCTDP, valued at over five billion dollars, has significantly leveraged federal funding by forging effective partnerships founded on sound principles. For every federal dollar invested, CCTDP participants have invested two dollars. These participants include utilities, technology developers, state governments, and research organizations. The project presented here was one of nine selected in January 1991 from 33 proposals submitted in response to the program's fourth solicitation.

  8. Engineer exchanging project on coal mine technology field in fiscal 1999. International information exchanging project (the overseas workshop in Vietnam); 1999 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kaigai workshop (Vietnam)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Technical information exchange was performed with Vietnamese engineers related to coal mine technologies through the overseas workshop and the technical tour. At the same time, investigations were executed on the production technology levels and needs in Vietnam, and on possibilities of transfer of Japanese technologies. The 'Overseas workshop (Vietnam)' was held on September 28, 1999 with the 'trends and problems in coal production technologies' as the main theme. Lectures were given in the session related to coal production technologies by Vietnamese coal technology experts, each from VINACOAL and IMSAT, and by two Japanese coal technology experts. A comprehensive discussion was also executed, and items of technical information were exchanged on the coal production technologies. The number of persons actually participated in the workshop counted 58, with the proceedings presented by them distributed. The Mao Khe and Duong Huy coal mines in Quang Ninh Province were visited as the technical tour, whereas the coal mine sites were inspected and opinions were exchanged with the site engineers. Gas analysis was performed in the Mao Khe mine from the viewpoint of a gas control technology, and site investigation was carried out on lock bolts in the Duong Huy mine from the viewpoint of a roof control technology. (NEDO)

  9. Thermionic Technology Program, fiscal year 1986: Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Cone, V.P.; Dunlay, J.B.

    1987-12-01

    During FY 1986, the Thermionic Technology Program at Thermo Electron Corporation concentrated on advancing the development of cermet sheath insulators and additive converters. Both development efforts were based on the thermionic technology established by thermionic reactor programs during the 1960's and early 1970's. Improved sheath insulators and additive converters were fabricated during FY 1986 and delivered to Rasor Associates Incorporated, for extensive testing and evaluation. The most promising cermet fabrication process changed from dry ceramic powder coating of niobium spherical particles to the use of water-based slurries of ceramic powder and fine, irregularly shaped, niobium powder. Slurry processing is much more controlled and reproducible. The fabrication of crack-free, fully dense yttria alumina garnet (YAG) sheath insulator trilayers remains to be accomplished. Measurements of the thermal expansion of YAG indicate that the expansion mismatch with niobium (particularly from 1300 to 1500 C) may cause cracking. Limited evidence also suggests that high-temperature (1500 C and higher) reactions between YAG and niobium may also contribute to cracking. Alternative fabrication schedules need to be explored to minimize these adverse high-temperature effects. Preliminary tests indicate that alternative ceramics, such as oxide composites and aluminum oxynitride (ALON), show promise as improved sheath insulators. 41 figs., 5 tabs.

  10. 76 FR 14407 - Exchange of Letters Between Dr. Murray M. Lumpkin, Deputy Commissioner, International Programs...

    Science.gov (United States)

    2011-03-16

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration Exchange of Letters Between Dr. Murray M. Lumpkin, Deputy... providing notice of exchange of letters between Dr. Murray M. Lumpkin, Deputy Commissioner, International...

  11. A computer program for condensing heat exchanger performance in the presence of noncondensable gases

    Science.gov (United States)

    Yendler, Boris

    1994-01-01

    A computer model has been developed which evaluates the performance of a heat exchanger. This model is general enough to be used to evaluate many heat exchanger geometries and a number of different operating conditions. The film approach is used to describe condensation in the presence of noncondensables. The model is also easily expanded to include other effects like fog formation or suction.

  12. 78 FR 12655 - Federal-State Unemployment Insurance (UI) Program; Data Exchange Standardization as Required by...

    Science.gov (United States)

    2013-02-25

    ... exchange standardization, but to date, no cross-agency data exchange functions have been identified as... States collaborating to jointly establish a project team to oversee the design, development and... State consortia to develop jointly functional requirements and development of modernized UI IT Benefits...

  13. Energy efficiency program through exchange of air conditioners in residential sector of Manaus city: a concrete experience; Programa de eficiencia energetica atraves da troca de condicionadores de ar no setor residencial de Manaus: uma experiencia concreta

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Fabricio Rodrigues; Goncalves, Ana Catarina Lima Chaves; Cartaxo, Elizabeth Ferreira; Gomes, Hugo Miguel Oliveira; Nascimento, Nilton Correa; Inui, Raul Eiji; Guedes, Ricardo Augusto de Morais; Benchaya, Roberto Tavares [Universidade Federal do Amazonas (UFAM), Manaus, AM (Brazil)

    2004-07-01

    The present review attempts to evaluate the importance of efficient equipment diffusion in reducing energy consumption, based upon the Study-case of an air conditioned exchange program in Manaus city of Amazonas. In spite of the existence, in the actual market, of efficient technology, it has been, yet, badly diffused, mostly due to economical and informative laps. Therefore, once tried to demonstrate the potential benefits, in technical gains, of energy efficiency offered by efficient Air conditioned equipment, through a plan that favors the consumer's participation as an active contributor in the dissemination process of efficient technology, and a following program for efficiency evaluation, beside a tributary evaluation proposal, so that technology becomes accessible to the general population, attempting its benefices. In addition, the environmental benefits of that specific proposal are analyzed, trough the developed recycling program. (author)

  14. Aeronautics Research and Technology Program and specific objectives, fiscal year 1982

    Science.gov (United States)

    Olstad, W. B.

    1981-01-01

    The Aeronautics Research and Technology program is broken down into two program areas (research and technology base, and systems technology programs) which are further broken down into succeedingly more detailed activities to form a work breakdown structure for the aeronautics program: program area, program/discipline objective, specific objective, and research and technology objective and plan (RTOP). A detailed view of this work breakdown structure down to the specific objective level is provided, and goals or objectives at each of these levels are set forth. What is to be accomplished and why are addressed, but not how. The letter falls within the domain of the RTOP.

  15. Oak Ridge National Laboratory (ORNL) Superconducting Technology Program for electric power systems. Annual report for FY 1994

    Energy Technology Data Exchange (ETDEWEB)

    Koncinski, W.S. [ed.; Hawsey, R.A. [comp.

    1994-12-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy`s Office of Energy Efficiency and Renewable Energy to develop the technology base needed by US industry for commercial development of electric power applications of high-temperature superconductivity. The three major elements of this program are conductor development, applications development, and the Superconductivity Partnership Initiative. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY 1994 Annual Program Review held July 19--20, 2994. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to industrial competitiveness projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with US industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire products.

  16. Pathways to Commercial Success: Technologies and Products Supported by the Hydrogen, Fuel Cells and Infrastructure Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2009-08-01

    This report documents the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Hydrogen, Fuel Cells and Infrastructure Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

  17. Integrating New Technologies and Existing Tools to Promote Programming Learning

    Directory of Open Access Journals (Sweden)

    Álvaro Santos

    2010-04-01

    Full Text Available In recent years, many tools have been proposed to reduce programming learning difficulties felt by many students. Our group has contributed to this effort through the development of several tools, such as VIP, SICAS, OOP-Anim, SICAS-COL and H-SICAS. Even though we had some positive results, the utilization of these tools doesn’t seem to significantly reduce weaker student’s difficulties. These students need stronger support to motivate them to get engaged in learning activities, inside and outside classroom. Nowadays, many technologies are available to create contexts that may help to accomplish this goal. We consider that a promising path goes through the integration of solutions. In this paper we analyze the features, strengths and weaknesses of the tools developed by our group. Based on these considerations we present a new environment, integrating different types of pedagogical approaches, resources, tools and technologies for programming learning support. With this environment, currently under development, it will be possible to review contents and lessons, based on video and screen captures. The support for collaborative tasks is another key point to improve and stimulate different models of teamwork. The platform will also allow the creation of various alternative models (learning objects for the same subject, enabling personalized learning paths adapted to each student knowledge level, needs and preferential learning styles. The learning sequences will work as a study organizer, following a suitable taxonomy, according to student’s cognitive skills. Although the main goal of this environment is to support students with more difficulties, it will provide a set of resources supporting the learning of more advanced topics. Software engineering techniques and representations, object orientation and event programming are features that will be available in order to promote the learning progress of students.

  18. Geothermal Technology Development Program. Annual progress report, October 1983-September 1984

    Energy Technology Data Exchange (ETDEWEB)

    Kelsey, J.R. (ed.)

    1985-08-01

    This report describes the status of ongoing Research and Development (R and D) within the Geothermal Technology Development Program. The work reported is sponsored by the Department of Energy/Geothermal Hydropower Technology Division (DOE/GHTD), with program management provided by Sandia National Laboratories. The program emphasizes research in rock penetration mechanics, fluid technology, borehole mechanics, diagnostics technology, and permeability enhancement. 102 figs., 16 tabs.

  19. Advanced Technologies for Contents Sharing, Exchanging and Searching in E-Learning Systems

    Science.gov (United States)

    De Pietro, Orlando; Appratto, Francesco

    2004-01-01

    In this article we explain a semantic analysis model derived from neural networks and pattern classification experiences, based on keyword sets. This model can be used for searching, analyzing, and composing documents in e-learning systems and for permitting inter-platform collaboration and data exchange. In particular, we explain some searching…

  20. A GRADUATE CERTIFICATE PROGRAM IN NUCLEAR SAFEGUARDS TECHNOLOGY.

    Energy Technology Data Exchange (ETDEWEB)

    FISHBONE, L.; SISKIND, B.; PEPPER, S.

    2005-07-10

    While there are a number of university graduate-education programs that address non-proliferation and safeguards policy issues; there are none in the United States that train students in the specific technical aspects of nuclear safeguards. Formal education of this kind is necessary to sustain the flow of technically trained individuals to diverse programs in safeguards, nonproliferation, and national security. In response to this need, the University of Missouri-Columbia, with assistance from Brookhaven National Laboratory, is initiating a Graduate Certificate Program in Nuclear Safeguards Technology: Students seeking advanced degrees in a variety of technical areas will complete a required sequence of courses in order to receive the certification. Required course work covers topics such as Nuclear Material Control and Accountability (MC&A), Physical Protection (PP); nuclear measurements, and a variety of other relevant subjects. Laboratory-based instruction will be included which will utilize the University of Missouri Research Reactor(MURR). MURR is the largest university-based research reactor and has extensive laboratory resources including a Canberra Aquila MPC&A Operational Monitoring demonstration system.

  1. Accelerator technology program. Progress report, January-December 1979

    Energy Technology Data Exchange (ETDEWEB)

    Knapp, E.A.; Jameson, R.A. (comps.)

    1980-11-01

    The activities of Los Alamos Scientific Laboratory's (LASL) Accelerator Technology (AT) Division during the calendar year 1979 are highlighted, with references to more detailed reports. This report is organized around the major projects of the Division, reflecting a wide variety of applications and sponsors. The first section covers the Fusion Materials Irradiation Test program, a collaborative effort with the Hanford Engineering Development Laboratory; the second section summarizes progress on the Proton Storage Ring to be built between LAMPF and the LASL Pulsed Neutron Research facility. A new project that achieved considerable momentum during the year is described next - the free-electron laser studies; the following section discusses the status of the Pion Generator for Medical Irradiation program. Next, two more new programs, the racetrack microtron being developed jointly by AT-Division and the National Bureau of Standards and the radio-frequency (rf) accelerator development for heavy ion fusion, are outlined. Development activities on a new type of high-power, high-efficiency rf amplifier called the gyrocon are then reported, and the final sections cover development of H/sup -/ ion sources and injectors, and linear accelerator instrumentation and beam dynamics.

  2. The value of European exchange programs for early career family doctors.

    Science.gov (United States)

    Bridgwood, Bernadeta; Willoughby, Hannah; Attridge, Madeleine; Tang, Eugene

    2017-07-01

    The Hippokrates Exchange programme (HEP) is designed to give early career General Practitioners (Associates in Training (AITs)/First5s) first-hand experience into concepts of a primary healthcare system outside of their host country. The aim is to improve GP knowledge and skills, inspire professional development and promote a global approach to primary care. Although an increasing number are taking up this opportunity, their views and experiences of international exchanges are not well described. The aim of the study was to explore the experiences of AITs/First5s following their HEP exchanges. This qualitative study analysed 16 post-exchange reports of UK participants visiting 10 European countries via the HEP, using a thematic approach. Participants were unanimously positive about their exchange experiences. The themes that emerged were (1) Comparison of primary care practice (2) Infrastructure of host primary care (3) Motivation and experience of exchanges and (4) Learning and reflection. Participants displayed considerable benefits from these exchanges by broadening their experience in different primary care systems and identifying improvements to be incorporated into their UK practice.

  3. Advanced Earth-to-orbit propulsion technology program overview: Impact of civil space technology initiative

    Science.gov (United States)

    Stephenson, Frank W., Jr.

    1988-01-01

    The NASA Earth-to-Orbit (ETO) Propulsion Technology Program is dedicated to advancing rocket engine technologies for the development of fully reusable engine systems that will enable space transportation systems to achieve low cost, routine access to space. The program addresses technology advancements in the areas of engine life extension/prediction, performance enhancements, reduced ground operations costs, and in-flight fault tolerant engine operations. The primary objective is to acquire increased knowledge and understanding of rocket engine chemical and physical processes in order to evolve more realistic analytical simulations of engine internal environments, to derive more accurate predictions of steady and unsteady loads, and using improved structural analyses, to more accurately predict component life and performance, and finally to identify and verify more durable advanced design concepts. In addition, efforts were focused on engine diagnostic needs and advances that would allow integrated health monitoring systems to be developed for enhanced maintainability, automated servicing, inspection, and checkout, and ultimately, in-flight fault tolerant engine operations.

  4. National Research Council Research Associateships Program with Methane Hydrates Fellowships Program/National Energy Technology Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Basques, Eric O. [National Academy of Sciences, Washington, DC (United States)

    2014-03-20

    This report summarizes work carried out over the period from July 5, 2005-January 31, 2014. The work was carried out by the National Research Council Research Associateships Program of the National Academies, under the US Department of Energy's National Energy Technology Laboratory (NETL) program. This Technical Report consists of a description of activity from 2005 through 2014, broken out within yearly timeframes, for NRC/NETL Associateships researchers at NETL laboratories which includes individual tenure reports from Associates over this time period. The report also includes individual tenure reports from associates over this time period. The report also includes descriptions of program promotion efforts, a breakdown of the review competitions, awards offered, and Associate's activities during their tenure.

  5. The Oncor Geodatabase for the Columbia Estuary Ecosystem Restoration Program: Handbook of Data Reduction Procedures, Workbooks, and Exchange Templates

    Energy Technology Data Exchange (ETDEWEB)

    Sather, Nichole K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Borde, Amy B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Diefenderfer, Heida L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Serkowski, John A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Coleman, Andre M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Johnson, Gary E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2013-12-01

    This Handbook of Data Reduction Procedures, Workbooks, and Exchange Templates is designed to support the Oncor geodatabase for the Columbia Estuary Ecosystem Restoration Program (CEERP). The following data categories are covered: water-surface elevation and temperature, sediment accretion rate, photo points, herbaceous wetland vegetation cover, tree plots and site summaries, fish catch and density, fish size, fish diet, fish prey, and Chinook salmon genetic stock identification. The handbook is intended for use by scientists collecting monitoring and research data for the CEERP. The ultimate goal of Oncor is to provide quality, easily accessible, geospatial data for synthesis and evaluation of the collective performance of CEERP ecosystem restoration actions at a program scale.

  6. Nuclear-Renewable Hybrid Energy Systems: 2016 Technology Development Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    Bragg-Sitton, Shannon M. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boardman, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rabiti, Cristian [Idaho National Lab. (INL), Idaho Falls, ID (United States); Suk Kim, Jong [Idaho National Lab. (INL), Idaho Falls, ID (United States); McKellar, Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sabharwall, Piyush [Idaho National Lab. (INL), Idaho Falls, ID (United States); Chen, Jun [Idaho National Lab. (INL), Idaho Falls, ID (United States); Cetiner, M. Sacit [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Harrison, T. Jay [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Qualls, A. Lou [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-03-01

    The United States is in the midst of an energy revolution, spurred by advancement of technology to produce unprecedented supplies of oil and natural gas. Simultaneously, there is an increasing concern for climate change attributed to greenhouse gas (GHG) emissions that, in large part, result from burning fossil fuels. An international consensus has concluded that the U.S. and other developed nations have an imperative to reduce GHG emissions to address these climate change concerns. The global desire to reduce GHG emissions has led to the development and deployment of clean energy resources and technologies, particularly renewable energy technologies, at a rapid rate. At the same time, each of the major energy sectors—the electric grid, industrial manufacturing, transportation, and the residential/commercial consumers— is increasingly becoming linked through information and communications technologies, advanced modeling and simulation, and controls. Coordination of clean energy generation technologies through integrated hybrid energy systems, as defined below, has the potential to further revolutionize energy services at the system level by coordinating the exchange of energy currency among the energy sectors in a manner that optimizes financial efficiency (including capital investments), maximizes thermodynamic efficiency (through best use of exergy, which is the potential to use the available energy in producing energy services), reduces environmental impacts when clean energy inputs are maximized, and provides resources for grid management. Rapid buildout of renewable technologies has been largely driven by local, state, and federal policies, such as renewable portfolio standards and production tax credits that incentivize investment in these generation sources. A foundational assumption within this program plan is that renewable technologies will continue to be major contributors to the future U.S. energy infrastructure. While increased use of clean

  7. Mississippi Curriculum Framework for Medical Radiologic Technology (Radiography) (CIP: 51.0907--Medical Radiologic Technology). Postsecondary Programs.

    Science.gov (United States)

    Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

    This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the radiologic technology program. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies for the program,…

  8. Pecan Street Grid Demonstration Program. Final technology performance report

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-02-10

    This document represents the final Regional Demonstration Project Technical Performance Report (TPR) for Pecan Street Inc.’s (Pecan Street) Smart Grid Demonstration Program, DE-OE-0000219. Pecan Street is a 501(c)(3) smart grid/clean energy research and development organization headquartered at The University of Texas at Austin (UT). Pecan Street worked in collaboration with Austin Energy, UT, Environmental Defense Fund (EDF), the City of Austin, the Austin Chamber of Commerce and selected consultants, contractors, and vendors to take a more detailed look at the energy load of residential and small commercial properties while the power industry is undergoing modernization. The Pecan Street Smart Grid Demonstration Program signed-up over 1,000 participants who are sharing their home or businesses’s electricity consumption data with the project via green button protocols, smart meters, and/or a home energy monitoring system (HEMS). Pecan Street completed the installation of HEMS in 750 homes and 25 commercial properties. The program provided incentives to increase the installed base of roof-top solar photovoltaic (PV) systems, plug-in electric vehicles with Level 2 charging, and smart appliances. Over 200 participants within a one square mile area took advantage of Austin Energy and Pecan Street’s joint PV incentive program and installed roof-top PV as part of this project. Of these homes, 69 purchased or leased an electric vehicle through Pecan Street’s PV rebate program and received a Level 2 charger from Pecan Street. Pecan Street studied the impacts of these technologies along with a variety of consumer behavior interventions, including pricing models, real-time feedback on energy use, incentive programs, and messaging, as well as the corresponding impacts on Austin Energy’s distribution assets.The primary demonstration site was the Mueller community in Austin, Texas. The Mueller development, located less than three miles from the Texas State Capitol

  9. Integration Of Innovative Technologies And Affective Teaching amp Learning In Programming Courses

    Directory of Open Access Journals (Sweden)

    Alvin Prasad

    2015-08-01

    Full Text Available Abstract Technology has been integral component in the teaching and learning process in this millennium. In this review paper we evaluate the different technologies which are used to currently facilitate the teaching and learning of computer programming courses. The aim is to identify problems or gaps in technology usage in the learning environment and suggest affective solutions for technology integration into programming courses at the University levels in the future. We believe that with the inclusion of suggested innovative technologies and affective solutions in programming courses teaching and learning will be attractive and best for the programming industry.

  10. Techniques for Securing Data Exchange between a Database Server and a Client Program

    National Research Council Canada - National Science Library

    Ovidiu Crista

    2009-01-01

    The goal of the presented work is to illustrate a method by which the data exchange between a standalone computer software and a shared database server can be protected of unauthorized interceptation...

  11. Project to promote exchange of international information on environmental technologies; Kankyo gijutsu kokusai joho koryu sokushin jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Mutual information exchange at international levels is important for practical application of global environment preservation technologies, whereas the APEC Virtual Center was established in fiscal 1997. Fiscal 1998 has discussed the future functions of the Virtual Center, and carried out the following matters to improve the functions and achieve its stable operation. Discussions were given on common use with the centers of other countries and regions of the specifications of classification systems for information areas and provided information that are provided by the Virtual Center. Visits were made to sub-managing countries and regions for smooth operation of the study groups, and opinions were exchanged. Visits were made to coordinators and contact points established in each country and region when the Center was founded in fiscal 1997. A visit was made to the U.S. Environmental Protection Agency to exchange opinions on coordination measures with the Cleaner Production Strategy of the U.S.A. being a project similar to the subject project. In order to strengthen the Japan's Center, attempts were made to expand the linking information to wider scope. Special pages publishing concentratedly the items of information that the users are interested were prepared as part of the information provision. (NEDO)

  12. NASA's Exploration Technology Development Program Energy Storage Project Battery Technology Development

    Science.gov (United States)

    Reid, Concha M.; Miller, Thomas B.; Mercer, Carolyn R.; Jankovsky, Amy L.

    2010-01-01

    Technical Interchange Meeting was held at Saft America s Research and Development facility in Cockeysville, Maryland on Sept 28th-29th, 2010. The meeting was attended by Saft, contractors who are developing battery component materials under contracts awarded through a NASA Research Announcement (NRA), and NASA. This briefing presents an overview of the components being developed by the contractor attendees for the NASA s High Energy (HE) and Ultra High Energy (UHE) cells. The transition of the advanced lithium-ion cell development project at NASA from the Exploration Technology Development Program Energy Storage Project to the Enabling Technology Development and Demonstration High Efficiency Space Power Systems Project, changes to deliverable hardware and schedule due to a reduced budget, and our roadmap to develop cells and provide periodic off-ramps for cell technology for demonstrations are discussed. This meeting gave the materials and cell developers the opportunity to discuss the intricacies of their materials and determine strategies to address any particulars of the technology.

  13. The Portfolio Selection by Using Quadratic Programming Approach Case Study of Malaysia Stock Exchange

    Directory of Open Access Journals (Sweden)

    Ali YOUSFAT

    2015-08-01

    Full Text Available This paper uses the quadratic approach to select the optimum portfolio of the Malaysian stovk exchange. This framework deals with ten biggest firms posted on the stock exchange during 2014. The result shows that the optimum portfolio includes 22 % of Axiata Group shares, 11% of Genting shares, 30 % of Petronas Chemicals shares, 1% of Sime Darbi shares and 36 % of Tenaga Nasional shares.

  14. IMPLEMENTING INFORMATION TECHNOLOGY: AN ALTERNATIVE FOR URBAN RESETTLEMENT PROGRAM

    Directory of Open Access Journals (Sweden)

    Bauni Hamid

    2001-01-01

    Full Text Available Revitalizing slum-area has been recognized as one of the most complicated parts in urban resettlement program. With such a context we need a particular mode of communication to initiate and generate the project based on people's own aspiration. There are problem characteristics here, which are usually executed by Information Technology (IT. It is a potential to overcome the problem by using IT based on its ability to manage abundant information with various variables. At least there are three prospective opportunities in applying IT in this area. Firstly, it is the role of visualization, where computer can execute several visual features of the projects, which will be more representative than the previous ones. Secondly, it is the role of IT in generating the customization process to everyone involved in the projects. The last is the role of IT as executing tool for project's database management.

  15. Computer program for distance learning of pesticide application technology

    Directory of Open Access Journals (Sweden)

    Bruno Maia

    2011-12-01

    Full Text Available Distance learning presents great potential for mitigating field problems on pesticide application technology. Thus, due to the lack of teaching material about pesticide spraying technology in the Portuguese language and the increasing availability of distance learning, this study developed and evaluated a computer program for distance learning about the theory of pesticide spraying technology using the tools of information technology. The modules comprising the course, named Pulverizar, were: (1 Basic concepts, (2 Factors that affect application, (3 Equipments, (4 Spraying nozzles, (5 Sprayer calibration, (6 Aerial application, (7 Chemigation, (8 Physical-chemical properties, (9 Formulations, (10 Adjuvants, (11 Water quality, and (12 Adequate use of pesticides. The program was made available to the public on July 1st, 2008, hosted at the web site www.pulverizar.iciag.ufu.br, and was simple, robust and practical on the complementation of traditional teaching for the education of professionals in Agricultural Sciences. Mastering pesticide spraying technology by people involved in agricultural production can be facilitated by the program Pulverizar, which was well accepted in its initial evaluation.O ensino à distância apresenta grande potencial para minorar os problemas ocorridos no campo na área de tecnologia de aplicação de agroquímicos. Dessa forma, diante da escassez de material instrucional na área de tecnologia de aplicação de agroquímicos em Português e do crescimento elevado da educação à distância, o objetivo deste trabalho foi desenvolver e avaliar um programa computacional para o ensino à distância da parte teórica de tecnologia de aplicação de agroquímicos, utilizando as ferramentas de tecnologia da informação. Os módulos que compuseram o curso, intitulado Pulverizar, foram: (1 Conceitos básicos, (2 Fatores que afetam a aplicação, (3 Equipamentos, (4 Pontas de pulverização, (5 Calibração de pulverizadores

  16. Nitroguanidine Wastewater Pollution Control Technology: Phase III. Ion Exchange and Carbon Adsorption Treatment

    Science.gov (United States)

    1984-03-01

    SD are synthetic cross-linked resins provided as moist spherical beads nominally of 50 percent water content. The clinoptilolite was supplied presized...Na+ i3 provided by a resin (either naturally occurring or synthetic ). Usually, the resin is prepared in a fixed-bed column, and hard water ion is...these :.ons as well as NQ. I/’ I . , I * MATERIALS AND METHODS RESINS AND CARBONS Three ion-exchange materials were studied: clinoptilolite , an

  17. Using Technology To Promote Your Guidance and Counseling Program among Stake Holders.

    Science.gov (United States)

    Sabella, Russell A.; Booker, Beverly L.

    2003-01-01

    Focuses on the use of technology to promote guidance and counseling programs among stakeholders. Details the significance of promoting comprehensive guidance and counseling programs and examples of technology tools used for persuasive communication. Discusses the advantages and disadvantages of using technology to promote a school counseling…

  18. Technology and Literacy: 21st Century Library Programming for Children and Teens

    Science.gov (United States)

    Nelson, Jennifer; Braafladt, Keith

    2012-01-01

    Technology may not be a magic wand, but innovative technology programming can genuinely help children become adept at navigating our increasingly wired world while also helping them develop deductive reasoning, math, and other vital literacy skills. One of the simplest and most powerful tools for technology-based public library programming is…

  19. Geothermal Technologies Program Geoscience and Supporting Technologies 2001 University Research Summaries

    Energy Technology Data Exchange (ETDEWEB)

    Creed, Robert John; Laney, Patrick Thomas

    2002-06-01

    The U.S. Department of Energy Office of Wind and Geothermal Technologies (DOE) is funding advanced geothermal research through University Geothermal Research solicitations. These solicitations are intended to generate research proposals in the areas of fracture permeability location and characterization, reservoir management and geochemistry. The work funded through these solicitations should stimulate the development of new geothermal electrical generating capacity through increasing scientific knowledge of high-temperature geothermal systems. In order to meet this objective researchers are encouraged to collaborate with the geothermal industry. These objectives and strategies are consistent with DOE Geothermal Energy Program strategic objectives.

  20. Geothermal Technologies Program Geoscience and Supporting Technologies 2001 University Research Summaries

    Energy Technology Data Exchange (ETDEWEB)

    Creed, R.J.; Laney, P.T.

    2002-05-14

    The U.S. Department of Energy Office of Wind and Geothermal Technologies (DOE) is funding advanced geothermal research through University Geothermal Research solicitations. These solicitations are intended to generate research proposals in the areas of fracture permeability location and characterization, reservoir management and geochemistry. The work funded through these solicitations should stimulate the development of new geothermal electrical generating capacity through increasing scientific knowledge of high-temperature geothermal systems. In order to meet this objective researchers are encouraged to collaborate with the geothermal industry. These objectives and strategies are consistent with DOE Geothermal Energy Program strategic objectives.

  1. SPINES Pilot Programme for the International Exchange of Information on the Application of Science and Technology to Development.

    Science.gov (United States)

    United Nations Educational, Scientific, and Cultural Organization, Paris (France).

    This report describes the pilot program for SPINES, a computerized system for collecting, selecting, analysing, and disseminating documents and factual data that have a direct bearing on policy-making, arrangement, transfer, and assessment in science and technology. This data is needed in developing policies for the advancement of science and…

  2. 75 FR 69049 - Expansion and Extension of the Green Technology Pilot Program

    Science.gov (United States)

    2010-11-10

    ... Pilot Program for Green Technologies Including Greenhouse Gas Reduction, 74 FR 64666 (December 8, 2009... Pilot Program, 75 FR 28554 (May 10, 2010), 1355 Off. Gaz. Pat. Office 188 (June 15, 2010). The Green... Patent and Trademark Office Expansion and Extension of the Green Technology Pilot Program AGENCY:...

  3. A Technology for Program Documentation and Evaluation: A Pilot Meta-Evaluation.

    Science.gov (United States)

    Gray, Peter J.

    Meta evaluation, or the evaluation of evaluations, was applied to a technology for program documentation and evaluation used in a mainstreaming project. The technology consisted of four phases: (1) planning for decision-making; (2) documenting actual program outcomes; (3) implementing decisions; and (4) instituting program renewal. This pilot meta…

  4. Programs for Middle School Math: An Inventory of Existing Technology. Working Paper

    Science.gov (United States)

    Saultz, Andrew

    2012-01-01

    In this working paper, Andrew Saultz of Michigan State University inventories the current landscape of technology programs available for middle school math. The working paper is not intended as a "consumers' guide" to technology programs, and the descriptions of some specific programs are not fully accurate or current. Readers who are interested…

  5. Immunoglobulin domain interface exchange as a platform technology for the generation of Fc heterodimers and bispecific antibodies

    Science.gov (United States)

    Skegro, Darko; Stutz, Cian; Ollier, Romain; Svensson, Emelie; Wassmann, Paul; Bourquin, Florence; Monney, Thierry; Gn, Sunitha; Blein, Stanislas

    2017-01-01

    Bispecific antibodies (bsAbs) are of significant importance to the development of novel antibody-based therapies, and heavy chain (Hc) heterodimers represent a major class of bispecific drug candidates. Current technologies for the generation of Hc heterodimers are suboptimal and often suffer from contamination by homodimers posing purification challenges. Here, we introduce a new technology based on biomimicry wherein the protein-protein interfaces of two different immunoglobulin (Ig) constant domain pairs are exchanged in part or fully to design new heterodimeric domains. The method can be applied across Igs to design Fc heterodimers and bsAbs. We investigated interfaces from human IgA CH3, IgD CH3, IgG1 CH3, IgM CH4, T-cell receptor (TCR) α/β, and TCR γ/δ constant domain pairs, and we found that they successfully drive human IgG1 CH3 or IgM CH4 heterodimerization to levels similar to or above those of reference methods. A comprehensive interface exchange between the TCR α/β constant domain pair and the IgG1 CH3 homodimer was evidenced by X-ray crystallography and used to engineer examples of bsAbs for cancer therapy. Parental antibody pairs were rapidly reformatted into scalable bsAbs that were free of homodimer traces by combining interface exchange, asymmetric Protein A binding, and the scFv × Fab format. In summary, we successfully built several new CH3- or CH4-based heterodimers that may prove useful for designing new bsAb-based therapeutics, and we anticipate that our approach could be broadly implemented across the Ig constant domain family. To our knowledge, CH4-based heterodimers have not been previously reported. PMID:28450393

  6. Thermionic Technology Program: A, Insulator test and evaluation: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Dobson, J.C.; Witt, T.

    1987-11-30

    The Thermionic Technology Program (TTP) consisted of two major efforts, evaluation of insulators and evaluation of thermionic converters. This report details the work performed on the insulator phase of the program. Efforts were made to better understand the mechanisms involved in the electrochemistry of insulators at elevated temperatures by modelling the ionic transport through the various layers of the insulator package. Although rigorous analytic solutions could not be obtained owing to a lack of detailed data, a simplified model indicated that alumina should not fail by depletion of aluminum for thousands of years, whereas calculations for yttria revealed a far more rapid depletion of oxygen and consequently earlier failure. Methods for microscopic and electrical testing of cylindrical insulator samples were developed, and an improved test oven design was initiated. Testing of alumina/niobium cermet samples revealed rapid failure contrary to the theoretical predictions for alumina. Large discrepancies in the initial conduction activation energy among the various samples suggested that different mechanisms could have controlled the conduction and hence the failure in different samples, although all had undergone nominally identical processing. The short lifetimes reveal how rapidly ambient conditions in thermionic power conversion can degrade the performance of insulating oxides. It was concluded that minor dopants could have been responsible for the early breakdowns. Thus, high purity materials with precise quality control will be necessary for trilayer package development. 35 refs., 28 figs., 5 tabs.

  7. Critical Issues Forum: A multidisciplinary educational program integrating computer technology

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, R.J.; Robertson, B.; Jacobs, D. [Los Alamos National Lab., NM (United States)

    1998-09-01

    The Critical Issues Forum (CIF) funded by the US Department of Energy is a collaborative effort between the Science Education Team of Los Alamos National Laboratory (LANL) and New Mexico high schools to improve science education throughout the state of New Mexico as well as nationally. By creating an education relationship between the LANL with its unique scientific resources and New Mexico high schools, students and teachers participate in programs that increase not only their science content knowledge but also their critical thinking and problem-solving skills. The CIF program focuses on current, globally oriented topics crucial to the security of not only the US but to that of all nations. The CIF is an academic-year program that involves both teachers and students in the process of seeking solutions for real world concerns. Built around issues tied to LANL`s mission, participating students and teachers are asked to critically investigate and examine the interactions among the political, social, economic, and scientific domains while considering diversity issues that include geopolitical entities and cultural and ethnic groupings. Participants are expected to collaborate through telecommunications during the research phase and participate in a culminating multimedia activity, where they produce and deliver recommendations for the current issues being studied. The CIF was evaluated and found to be an effective approach for teacher professional training, especially in the development of skills for critical thinking and questioning. The CIF contributed to students` ability to integrate diverse disciplinary content about science-related topics and supported teachers in facilitating the understanding of their students using the CIF approach. Networking technology in CIF has been used as an information repository, resource delivery mechanism, and communication medium.

  8. Bachelor of Science-Engineering Technology Program and Fuel Cell Education Program Concentration

    Energy Technology Data Exchange (ETDEWEB)

    Block, David L. [Florida Solar Energy Center, Cocoa, FL (United States); Sleiti, Ahmad [Univ. of North Carolina, Charlotte, NC (United States)

    2011-09-19

    The Hydrogen and Fuel Cell Technology education project has addressed DOE goals by supplying readily available, objective, technical, and accurate information that is available to students, industry and the public. In addition, the program has supplied educated trainers and training opportunities for the next generation workforce needed for research, development, and demonstration activities in government, industry, and academia. The project has successfully developed courses and associated laboratories, taught the new courses and labs and integrated the HFCT option into the accredited engineering technology and mechanical engineering programs at the University of North Carolina at Charlotte (UNCC). The project has also established ongoing collaborations with the UNCC energy related centers of the Energy Production & Infrastructure Center (EPIC), the NC Motorsports and Automotive Research Center (NCMARC) and the Infrastructure, Design, Environment and Sustainability Center (IDEAS). The results of the project activities are presented as two major areas – (1) course and laboratory development, offerings and delivery, and (2) program recruitment, promotions and collaborations. Over the project period, the primary activity has been the development and offering of 11 HFCT courses and accompanying laboratories. This process has taken three years with the courses first being developed and then offered each year over the timeframe.

  9. 78 FR 36508 - Notice of Sugar Purchase and Exchange for Re-Export Program Credits; and Notice of Re-Export...

    Science.gov (United States)

    2013-06-18

    ... Commodity Credit Corporation Office of the Secretary Notice of Sugar Purchase and Exchange for Re-Export... actions. First, the Commodity Credit Corporation (CCC) announces the intent to purchase sugar to be offered in exchange for Refined Sugar Re-export Program credits. CCC will purchase sugar from...

  10. Ion Exchange Technology Development in Support of the Urine Processor Assembly

    Science.gov (United States)

    Mitchell, Julie; Broyan, James; Pickering, Karen

    2013-01-01

    The urine processor assembly (UPA) on the International Space Station (ISS) recovers water from urine via a vacuum distillation process. The distillation occurs in a rotating distillation assembly (DA) where the urine is heated and subjected to sub-ambient pressure. As water is removed, the original organics, salts, and minerals in the urine become more concentrated and result in urine brine. Eventually, water removal will concentrate the urine brine to super saturation of individual constituents, and precipitation occurs. Under typical UPA DA operating conditions, calcium sulfate or gypsum is the first chemical to precipitate in substantial quantity. During preflight testing with ground urine, the UPA achieved 85% water recovery without precipitation. However, on ISS, it is possible that crewmember urine can be significantly more concentrated relative to urine from ground donors. As a result, gypsum precipitated in the DA when operating at water recovery rates at or near 85%, causing the failure and subsequent re14 NASA Tech Briefs, September 2013 placement of the DA. Later investigations have demonstrated that an excess of calcium and sulfate will cause precipitation at water recovery rates greater than 70%. The source of the excess calcium is likely physiological in nature, via crewmembers' bone loss, while the excess sulfate is primarily due to the sulfuric acid component of the urine pretreatment. To prevent gypsum precipitation in the UPA, the Precipitation Prevention Project (PPP) team has focused on removing the calcium ion from pretreated urine, using ion exchange resins as calcium removal agents. The selectivity and effectiveness of ion exchange resins are determined by such factors as the mobility of the liquid phase through the polymer matrix, the density of functional groups, type of functional groups bound to the matrix, and the chemical characteristics of the liquid phase (pH, oxidation potential, and ionic strength). Previous experience with ion

  11. Federal employees health program experiences lack of competition in some areas, raising cost concerns for exchange plans.

    Science.gov (United States)

    McBride, Timothy D; Barker, Abigail R; Pollack, Lisa M; Kemper, Leah M; Mueller, Keith J

    2012-06-01

    The Affordable Care Act calls for creation of health insurance exchanges designed to provide private health insurance plan choices. The Federal Employees Health Benefits Program is a national model that to some extent resembles the planned exchanges. Both offer plans at the state level but are also overseen by the federal government. We examined the availability of plans and enrollment levels in the Federal Employees Health Benefits Program throughout the United States in 2010. We found that although plans were widely available, enrollment was concentrated in plans owned by just a few organizations, typically Blue Cross/Blue Shield plans. Enrollment was more concentrated in rural areas, which may reflect historical patterns of enrollment or lack of provider networks. Average biweekly premiums for an individual were lowest ($58.48) in counties where competition was extremely high, rising to $65.13 where competition was extremely low. To make certain that coverage sold through exchanges is affordable, policy makers may need to pay attention to areas where there is little plan competition and take steps through risk-adjustment policies or other measures to narrow differences in premiums and out-of-pocket expenses for consumers.

  12. Altruistic donor triggered domino-paired kidney donation for unsuccessful couples from the kidney-exchange program.

    Science.gov (United States)

    Roodnat, J I; Zuidema, W; van de Wetering, J; de Klerk, M; Erdman, R A M; Massey, E K; Hilhorst, M T; Ijzermans, J N M; Weimar, W

    2010-04-01

    Between January 2000 and July 2009, 132 individuals inquired about altruistic kidney donation to strangers. These donors were willing to donate to genetically and emotionally unrelated patients. Some altruistic donors wished to donate to a specific person, but most wished to donate anonymously. In domino-paired donation, the altruistic donor donates to the recipient of an incompatible couple; the donor of that couple (domino-donor) donates to another couple or to the waiting list. In contrast to kidney-exchange donation where bilateral matching of couples is required, recipient and donor matching are unlinked in domino-paired donation. This facilitates matching for unsuccessful couples from the kidney-exchange program where blood type O prevails in recipients and is under-represented in donors. Fifty-one altruistic donors (39%) donated their kidney and 35 domino-donors were involved. There were 29 domino procedures, 24 with 1 altruistic donor and 1 domino-donor, 5 with more domino-donors. Eighty-six transplantations were performed. Donor and recipient blood type distribution in the couples limited allocation to blood type non-O waiting list patients. The success rate of domino-paired donation is dependent on the composition of the pool of incompatible pairs, but it offers opportunities for difficult to match pairs that were unsuccessful in the kidney-exchange program.

  13. Evaluation of a hybrid ion exchange-catalyst treatment technology for nitrate removal from drinking water.

    Science.gov (United States)

    Bergquist, Allison M; Choe, Jong Kwon; Strathmann, Timothy J; Werth, Charles J

    2016-06-01

    Ion exchange (IX) is the most common approach to treating nitrate-contaminated drinking water sources, but the cost of salt to make regeneration brine, as well as the cost and environmental burden of waste brine disposal, are major disadvantages. A hybrid ion exchange-catalyst treatment system, in which waste brine is catalytically treated for reuse, shows promise for reducing costs and environmental burdens of the conventional IX system. An IX model with separate treatment and regeneration cycles was developed, and ion selectivity coefficients for each cycle were separately calibrated by fitting experimental data. Of note, selectivity coefficients for the regeneration cycle required fitting the second treatment cycle after incomplete resin regeneration. The calibrated and validated model was used to simulate many cycles of treatment and regeneration using the hybrid system. Simulated waste brines and a real brine obtained from a California utility were also evaluated for catalytic nitrate treatment in a packed-bed, flow-through column with 0.5 wt%Pd-0.05 wt%In/activated carbon support (PdIn/AC). Consistent nitrate removal and no apparent catalyst deactivation were observed over 23 d (synthetic brine) and 45 d (real waste brine) of continuous-flow treatment. Ion exchange and catalyst results were used to evaluate treatment of 1 billion gallons of nitrate-contaminated source water at a 0.5 MGD water treatment plant. Switching from a conventional IX system with a two bed volume regeneration to a hybrid system with the same regeneration length and sequencing batch catalytic reactor treatment would save 76% in salt cost. The results suggest the hybrid system has the potential to address the disadvantages of a conventional IX treatment systems. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. New monolith technology for automated anion-exchange purification of nucleic acids.

    Science.gov (United States)

    Thayer, J R; Flook, K J; Woodruff, A; Rao, S; Pohl, C A

    2010-04-15

    Synthetic nucleic acid analysis often employs pellicular anion-exchange (AE) chromatography because it supports very high efficiency separations while offering means to control secondary structure, retention and resolution by readily modifiable chromatographic conditions. However, these pellicular anion-exchange (pAE) phases do not offer capacity sufficient for lab-scale oligonucleotide (ON) purification. In contrast, monolithic phases produce fast separations at capacities exceeding their pellicular counterparts, but do not exhibit capacities typical of fully porous, bead-based, anion-exchangers. In order to further increase monolith capacity and obtain the selectivity and mass transfer characteristics of pellicular phases, a surface-functionalized monolith was coated with pAE nanobeads (latexes) usually employed on the pellicular DNAPac phase. The nanobead-coated monolith exhibited chromatographic behaviors typical of polymer AE phases. Based on this observation the monolithic substrate surface porosity and latex diameters were co-optimized to produce a hybrid monolith harboring capacity similar to that of fully porous bead-based phases and peak shape approaching that of the pAE phases. We tested the hybrid monolith on a variety of previously developed pAE capabilities including control of ON selectivity, resolution of derivatized ONs, the ability to resolve RNA ONs harboring aberrant linkages at different positions in a single sequence and separation of phosphorothioate diastereoisomers. We compared the yield and purity of an 8 mg ON sample purified on both the new hybrid monolith and a benchmark AE column based on fully porous monodisperse beads. This comparison included an assessment of the relative selectivities of both columns. Finally, we demonstrated the ability to couple AE ON separations with ESI-MS using an automated desalting protocol. This protocol is also useful for preparing ONs for other assays, such as enzyme treatments, that may be sensitive to

  15. Technological aspects of vegetable oils epoxidation in the presence of ion exchange resins: a review

    National Research Council Canada - National Science Library

    Eugeniusz Milchert; Kornelia Malarczyk-Matusiak; Marlena Musik

    2016-01-01

    ..., the relative percentage conversion to oxirane and the iodine number was discussed. Optimal technological parameters, mechanism of epoxidation by carboxylic peracids and the possibilities of catalyst recycling have been also discussed...

  16. A Professional Learning Program Designed to Increase K-12 Teachers' Instructional Technology Use

    Science.gov (United States)

    Spencer, Lisa A.

    2014-01-01

    Despite the ready availability of many instructional-technology resources, many teachers in the researched Maryland school district are uncomfortable using technology to deliver content. This concurrent mixed methods case study examined the impact of Sharing Technology with Educators Program (STEP) on 269 K-12 teachers' technology use. The study…

  17. 75 FR 57521 - Networking and Information Technology Research and Development (NITRD) Program: Draft NITRD 2010...

    Science.gov (United States)

    2010-09-21

    ... FOUNDATION Networking and Information Technology Research and Development (NITRD) Program: Draft NITRD 2010 Strategic Plan--URL Correction AGENCY: The National Coordination Office (NCO) for Networking and Information... Coordination Office for Networking and Information Technology Research and Development (NITRD)...

  18. 75 FR 55360 - Networking and Information Technology Research and Development (NITRD) Program: Draft NITRD 2010...

    Science.gov (United States)

    2010-09-10

    ... Networking and Information Technology Research and Development (NITRD) Program: Draft NITRD 2010 Strategic Plan AGENCY: The National Coordination Office (NCO) for Networking and Information Technology Research.... EDT on October 11, 2010. SUMMARY: With this notice, the National Coordination Office for...

  19. Technical and analytical support to the ARPA Artificial Neural Network Technology Program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-16

    Strategic Analysis (SA) has provided ongoing work for the Advanced Research Projects Agency (ARPA) Artificial Neural Network (ANN) technology program. This effort provides technical and analytical support to the ARPA ANN technology program in support of the following information areas of interest: (1) Alternative approaches for application of ANN technology, hardware approaches that utilize the inherent massive parallelism of ANN technology, and novel ANN theory and modeling analyses. (2) Promising military applications for ANN technology. (3) Measures to use in judging success of ANN technology research and development. (4) Alternative strategies for ARPA involvement in ANN technology R&D. These objectives were accomplished through the development of novel information management tools, strong SA knowledge base, and effective communication with contractors, agents, and other program participants. These goals have been realized. Through enhanced tracking and coordination of research, the ANN program is healthy and recharged for future technological breakthroughs.

  20. Geothermal drilling ad completion technology development program. Semi-annual progress report, April-September 1979

    Energy Technology Data Exchange (ETDEWEB)

    Varnado, S.G. (ed.)

    1980-05-01

    The progress, status, and results of ongoing Research and Development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, and completion technology. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1982 and by 50% by 1986.