WorldWideScience

Sample records for technology evaluations este

  1. QuEST: Qualifying Environmentally Sustainable Technologies

    Science.gov (United States)

    Lewis, Pattie

    2012-01-01

    Articles in this issue inlude: (1) Foundation of Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM) Technology Evaluation is Testing and Qualification, (2) Materials Management and Substitution Efforts, (3 Recycling and Pollution Control Efforts, and (4) Remediation Efforts

  2. Environmental and Sustainable Technology Evaluations (ESTE): Verification of Fuel Characteristics and Emissions from Biomass-fired Boilers 09/2008

    Science.gov (United States)

    This is an ESTE project summary brief. With increasing concern about climate change and fossil fuel energy supplies, there continues to be an interest in biomass as a renewable and sustainable energy source. EPA’s Office of Air Quality Planning and Standards has expressed an int...

  3. QuEST: Qualifying Environmentally Sustainable Technologies. Volume 6

    Science.gov (United States)

    Lewis, Pattie

    2011-01-01

    QuEST is a publication of the NASA Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM). This issue contains brief articles on: Risk Identification and Mitigation, Material Management and Substitution Efforts--Hexavalent Chrome-free Coatings and Low volatile organic compounds (VOCs) Coatings, Lead-Free Electronics, Corn-Based Depainting Media; Alternative Energy Efforts Hydrogen Sensors and Solar Air Conditioning. Other TEERM Efforts include: Energy and Water Management and Remediation Technology Collaboration.

  4. QuEST: Qualifying Environmentally Sustainable Technologies, Volume 5

    Science.gov (United States)

    Lewis, Pattie

    2010-01-01

    This edition of the QuEST newsletter contains brief articles that discuss the NASA Technology Evaluation for Environmental Risk Mitigation (TEERM) program, and the importance of collaboration, efforts in materials management and substitution for coatings for launch structures, Low volatile organic compound (VOC) Coatings Field Testing, Non-Chrome Coating Systems, Life Cycle Corrosion Testing, Lead-Free Electronics Testing and Corn Based Depainting and efforts in Pollution Control in the area of Hypergolic Propellant Destruction Evaluation, efforts in development of alternative energy in particular Hydrogen Sensors, Energy and Water Management, and efforts in remediation in the removal of Polychlorinated Biphenyl (PCB) contamination

  5. Extra heavy crudes and bitumens in the new EST technology

    International Nuclear Information System (INIS)

    Montanari, R.

    2001-01-01

    Strategic and market reasons dictate for the diversification of the supply sources. The huge reserves of extra heavy crudes and oil sands bitumen will provide the answer in this direction, but it is mandatory the availability of a suitable technology to process these poor quality feedstocks. EST Technology, developed by Snamprogetti and EniTecnologie, allows to get full conversion to produce high quality distillates [it

  6. QuEST: Qualifying Environmentally Sustainable Technologies. Volume 2

    Science.gov (United States)

    Brown, Christina (Editor)

    2007-01-01

    TEERM focuses its validation efforts on technologies that have shown promise in laboratory testing, but lack testing under realistic or field environment. Mature technologies have advantages over those that are still in the developmental stage such as being more likely to be transitioned into a working environment. One way TEERM begins to evaluate the suitability of technologies is through Technology Readiness Levels (TRLs). TRLs are a systematic metric/measurement system that supports assessments of the maturity of a particular technology and the consistent comparison of maturity between different types of technology. TEERM generally works on demonstrating/validating alternatives that fall within TRLs 5-9. In instances where a mature technology does not exist for a particular Agency application, TEERM works with technology development groups and programs such as NASA's Innovative Partnerships Program (IPP). The IPP's purpose is to identify and document available technologies in light of NASA's needs, evaluate and prioritize those technologies, and reach out to find new partners. All TEERM projects involve multiple partners. Partnering reduces duplication of effort that otherwise might occur if individuals worked their problems alone. Partnering also helps reduce individual contributors' shares of the total cost of technology validation. Through collaboration and financial commitment from project stakeholders and third-party sources, it is possible to fully fund expensive demonstration/validation efforts.

  7. QuEST: Qualifying Environmentally Sustainable Technologies. Volume 4

    Science.gov (United States)

    Lewis, Pattie L.

    2009-01-01

    In 2004, in one of their first collaborative efforts, Centro Para Prevencao da Poluicao (Portuguese Center for Pollution Prevention or C3P). teamed with Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM) and two Portuguese entities, TAP Portugal (Portuguese National Airline) and OGMA Indtistria Aeron utica de Portugal (Portuguese Aeronautics Industry), to target the reduction of hexavalent chromium, cadmium, and volatile organic compounds (VOCs) in aircraft maintenance operations. This project focused on two coating systems that utilize non-chrome pretreatments and low-VOC primers and topcoats.

  8. Extra heavy oil and refinery residues upgrading through Eni Slurry Technology : first EST commercial unit

    Energy Technology Data Exchange (ETDEWEB)

    Rispoli, G.; Sanfilippo, D.; Amoroso, A [Eni S.p.A., Rome (Italy)

    2009-07-01

    The production of heavy crude oils is projected to continue to grow in the upstream oil industry given that large reserves of unconventional extra heavy crude and bitumen exist in several geographic areas including Canada and Venezuela. As reserves of conventional crude oil continue to decline, these unconventional feedstocks are becoming an opportunity to pursue, but they require effective technologies for upgrading and meeting the growing demand for light and middle distillate fuels. This paper described the proprietary technology that offers a solution to upstream and downstream oil producers for bottom-of-the-barrel upgrading. En i Slurry Technology (EST) is constructing an industrial plant in its Sannazzaro refinery in Italy. The plant is designed to convert 23,000 BPSD of vacuum residue into high quality diesel and other valuable refinery streams such as liquefied petroleum gas, naphtha and jet fuel. EST is an H-addition process characterized by the use of a special homogeneous isothermal intrinsically safe reactor, and of a nano-dispersed non-ageing catalyst. EST converts more than 98 per cent of any type of residues to about 110 per cent volume of light products and distillates or extra heavy oils to high quality bottomless SCO. In typical performance, HDS is greater than 85 per cent, HDM greater than 99 per cent and HDCCR greater than 97 per cent. EST also achieves the target of zero fuel oil - zero coke. 12 refs., 4 tabs., 5 figs.

  9. Soil washing technology evaluation

    International Nuclear Information System (INIS)

    Suer, A.

    1995-04-01

    Environmental Restoration Engineering (ERE) continues to review innovative, efficient, and cost effective technologies for SRS soil and/or groundwater remediation. As part of this effort, this technical evaluation provides review and the latest information on the technology for SRS soil remediation. Additional technology evaluation reports will be issued periodically to update these reports. The purpose of this report is to review the soil washing technology and its potential application to SRS soil remediation. To assess whether the Soil Washing technology is a viable option for SRS soil remediation, it is necessary to review the technology/process, technology advantages/limitations, performance, applications, and cost analysis

  10. ENVIRONMENTAL AND SUSTAINABLE TECHNOLOGY EVALUATION: BIOMASS CO-FIRING IN INDUSTRIAL BOILERS--UNIVERSITY OF IOWA

    Science.gov (United States)

    The U.S. EPA operates the Environmental and Sustainable Technology Evaluation (ESTE) program to facilitate the deployment of innovative technologies through performance verification and information dissemination. This ESTE project involved evaluation of co-firing common woody bio...

  11. Evaluating New Technology.

    Science.gov (United States)

    Carniol, Paul J; Heffelfinger, Ryan N; Grunebaum, Lisa D

    2018-05-01

    There are multiple complex issues to consider when evaluating any new technology. First evaluate the efficacy of the device. Then considering your patient population decide whether this technology brings an added benefit to your patients. If it meets these 2 criteria, then proceed to the financial analysis of acquiring this technology. The complete financial analysis has several important components that include but are not limited to cost, value, alternatives, return on investment, and associated marketing expense. Copyright © 2018 Elsevier Inc. All rights reserved.

  12. A Training Technology Evaluation Tool

    National Research Council Canada - National Science Library

    Livingston, Stephen C; Dyer, Jean L; Swinson, Diadra

    2005-01-01

    A Training Technology Evaluation Tool was developed to help procurers and developers of training technologies to make informed decisions and to improve the overall effectiveness of training technologies...

  13. MINERGY CORPORATION GLASS FURNACE TECHNOLOGY EVALUATION: INNOVATION TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report presents performance and economic data for a U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program demonstration of the Minergy Corporation (Minergy) Glass Furnace Technology (GFT). The demonstration evaluated the techno...

  14. ENVIRONMENTAL AND SUSTAINABLE TECHNOLOGY EVALUATION: BIOMASS CO-FIRING IN INDUSTRIAL BOILERS--MINNESOTA POWER'S RAPIDS ENERGY CENTER

    Science.gov (United States)

    The U.S. EPA operates the Environmental and Sustainable Technology Evaluation (ESTE) program to facilitate the deployment of innovative technologies through performance verification and information dissemination. This ESTE project involved evaluation of co-firing common woody bio...

  15. Evaluating Technology Transfer and Diffusion.

    Science.gov (United States)

    Bozeman, Barry; And Others

    1988-01-01

    Four articles discuss the evaluation of technology transfer and diffusion: (1) "Technology Transfer at the U.S. National Laboratories: A Framework for Evaluation"; (2) "Application of Social Psychological and Evaluation Research: Lessons from Energy Information Programs"; (3) "Technology and Knowledge Transfer in Energy R and D Laboratories: An…

  16. EST Vocabulary Instruction

    Directory of Open Access Journals (Sweden)

    Célia D.S. Bell

    2012-05-01

    Full Text Available This study aims at contributing to the investigation on the instruction of EST (English for Science and Technology vocabulary, in terms of receptive use of the language. It evaluates the effectiveness of two teaching approaches to the acquisition of vocabulary. The first approach consisted of teaching vocabulary through the use of dictionaries, where the words were merely translated into the learners’ L1 or defined in the target language thus promoting superficial level of word processing. The second approach employed activities promoting deep level of word processing. Data were analysed quantitatively. Results indicated that the two approaches seem to have some equipotentiality, as far as EST vocabulary is concerned.

  17. Evaluative conditioning of food technologies

    DEFF Research Database (Denmark)

    Loebnitz, Natascha; Grunert, Klaus G

    2015-01-01

    Consumer attitudes play an important role in the acceptance of new technologies. The success of food innovations depends on understanding how consumers form and change attitudes toward food technologies. Earlier post hoc explanations suggest that evaluative conditioning can change consumer...... attitudes toward food technologies. The present study tests how evaluative conditioning can affect consumer acceptance of new food technologies. Furthermore, authors investigate whether evaluative conditioning is resistant to extinction after a two-month period and whether the evaluative conditioning effect...... prevails in a product-related context. Within an evaluative conditioning paradigm including between-subjects control groups in addition to standard within-subjects control conditions, participants were presented with three food technologies (conventional, enzyme, and genetic technology) paired...

  18. Evaluating technology service options.

    Science.gov (United States)

    Blumberg, D F

    1997-05-01

    Four service and support options are available to healthcare organizations for maintaining their growth arsenals of medical and information technology. These options include maintaining and servicing all equipment using a facility-based biomedical engineering and MIS service department; using a combination of facility-based service and subcontracted service; expanding facility-based biomedical and MIS service departments to provide service to other healthcare organizations to achieve economies of scale; and outsourcing all maintenance, repair, and technical support services. Independent service companies and original equipment manufacturers (OEMs) are offering healthcare organizations a wider array of service and support capabilities than ever before. However, some health systems have successfully developed their own independent service organizations to take care of their own--and other healthcare organizations'--service and support needs.

  19. Standoff Detection Technology Evaluation Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Standoff Detection Technology Evaluation facility is the only one of its kind in the country and allows researchers to release a known amount of material while...

  20. Corrosion evaluation technology

    International Nuclear Information System (INIS)

    Kim, Uh Chul; Han, Jeong Ho; Nho, Kye Ho; Lee, Eun Hee; Kim, Hong Pyo; Hwang, Seong Sik; Lee, Deok Hyun; Hur, Do Haeng; Kim, Kyung Mo.

    1997-09-01

    A multifrequency ACPD system was assembled which can measure very small crack. Stress corrosion cracking test system with SSRT operating high temperature was installed. Stress corrosion cracking test of newly developed alloy 600 and existing alloy 600 was carried out in steam atmosphere of 400 deg C. No crack was observed in both materials within a test period of 2,000 hrs. Corrosion fatigue test system operating at high temperature was installed in which fatigue crack was measured by CDPD. Lead enhanced the SCC of the Alloy 600 in high temperature water, had a tendency to modify a cracking morphology from intergranular to transgranular. Pit initiation preferentially occurred at Ti-rich carbide. Resistance to pit initiation decreased with increasing temperature up to 300 deg C. Test loop for erosion corrosion was designed and fabricated. Thin layer activation technique was very effective in measuring erosion corrosion. Erosion corrosion of a part of secondary side pipe was evaluated by the Check Family Codes of EPRI. Calculated values of pipe thickness by Check Family Codes coincided with the pipe thickness measured by UT with an error of ± 20%. Literature review on turbine failure showed that failure usually occurred in low pressure turbine rotor disc and causes of failure are stress corrosion cracking and corrosion fatigue. (author). 12 refs., 20 tabs., 77 figs

  1. Evaluation of the uranium anomaly of Punta del Este in the territory Isla de la Juventud

    International Nuclear Information System (INIS)

    Sanchez R, J.; Macola, E.; Alcalde, J.; Olivera, J.; Fernandez, P.; Villarino, J.

    1995-01-01

    The work show the projection and execution of the geologic-geophysics works on profiles executed to verificate the airborne spectrometric anomaly uranium in the territory the Island Young located in Punta del Este. As soon as the interpretation of the prospection works realizated as fundamental conclusion we obtained that this anomaly is associated to reed soils development over limestone, which have not contains of phosphorus

  2. SNP mining porcine ESTs with MAVIANT, a novel tool for SNP evaluation and annotation

    DEFF Research Database (Denmark)

    Panitz, Frank; Stengaard, Henrik; Hornshoj, Henrik

    2007-01-01

    MOTIVATION: Single nucleotide polymorphisms (SNPs) analysis is an important means to study genetic variation. A fast and cost-efficient approach to identify large numbers of novel candidates is the SNP mining of large scale sequencing projects. The increasing availability of sequence trace data...... manual annotation, which is immediately accessible and can be easily shared with external collaborators. RESULTS: Large-scale SNP mining of polymorphisms bases on porcine EST sequences yielded more than 7900 candidate SNPs in coding regions (cSNPs), which were annotated relative to the human genome. Non...

  3. Development and application of the RE-AIM QuEST mixed methods framework for program evaluation.

    Science.gov (United States)

    Forman, Jane; Heisler, Michele; Damschroder, Laura J; Kaselitz, Elizabeth; Kerr, Eve A

    2017-06-01

    To increase the likelihood of successful implementation of interventions and promote dissemination across real-world settings, it is essential to evaluate outcomes related to dimensions other than Effectiveness alone. Glasgow and colleagues' RE-AIM framework specifies four additional types of outcomes that are important to decision-makers: Reach, Adoption, Implementation (including cost), and Maintenance. To further strengthen RE-AIM, we propose integrating qualitative assessments in an expanded framework: RE-AIM Qualitative Evaluation for Systematic Translation (RE-AIM QuEST), a mixed methods framework. RE-AIM QuEST guides formative evaluation to identify real-time implementation barriers and explain how implementation context may influence translation to additional settings. RE-AIM QuEST was used to evaluate a pharmacist-led hypertension management intervention at 3 VA facilities in 2008-2009. We systematically reviewed each of the five RE-AIM dimensions and created open-ended companion questions to quantitative measures and identified qualitative and quantitative data sources, measures, and analyses. To illustrate use of the RE-AIM QuEST framework, we provide examples of real-time, coordinated use of quantitative process measures and qualitative methods to identify site-specific issues, and retrospective use of these data sources and analyses to understand variation across sites and explain outcomes. For example, in the Reach dimension, we conducted real-time measurement of enrollment across sites and used qualitative data to better understand and address barriers at a low-enrollment site. The RE-AIM QuEST framework may be a useful tool for improving interventions in real-time, for understanding retrospectively why an intervention did or did not work, and for enhancing its sustainability and translation to other settings.

  4. Selection and Evaluation of a Water Treatment Plant for the Thermoelectric Este Havana

    Directory of Open Access Journals (Sweden)

    Dra.C Dania del Toro-Álvarez

    2016-02-01

    Full Text Available Characteristics of different methods used in the world to desalinate sea water are compared, was identified the reverse osmosis method as the most appropriate. Were tendered possible technologies in the international market, given four possible plants. With the characteristics of each of them, carried out a screening process using the qualitative method, which allowed selection Chematek technology as the most appropriate from a technical standpoint. Was determined economic feasibility and the principles indicators of the efficiency of a project: the net actual value and the. The result of the NPV indicates that the project is profitable from the economic point of view.

  5. GENERAL ENVIRONMENTAL CORPORATION; CURE ELECTROCOAGULATION TECHNOLOGY: INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The CURE electrocoagulation technology was demonstrated under the Superfund Innovative Technology Evaluation (SITE) program at the U.S. Department of Energy (DOE) Rocky Flats Environmental Technology Site (RFETS), where water from the solar evaporation ponds (SEPs) was contaminat...

  6. 76 FR 30696 - Technology Evaluation Process

    Science.gov (United States)

    2011-05-26

    ...-NOA-0039] Technology Evaluation Process AGENCY: Office of Energy Efficiency and Renewable Energy... (DOE) seeks comments and information related to a commercial buildings technology evaluation process... evaluation efforts. The goal of creating this standard process is to evaluate energy-saving technologies in a...

  7. 76 FR 37344 - Technology Evaluation Process

    Science.gov (United States)

    2011-06-27

    ...-NOA-0039] Technology Evaluation Process AGENCY: Office of Energy Efficiency and Renewable Energy... seeks comments and information related to a commercial buildings technology evaluation process. DOE is seeking to create a process for evaluating emerging and underutilized energy efficient technologies for...

  8. Innovative technology transfer of nondestructive evaluation research

    Science.gov (United States)

    Brian Brashaw; Robert J. Ross; Xiping Wang

    2008-01-01

    Technology transfer is often an afterthought for many nondestructive evaluation (NDE) researchers. Effective technology transfer should be considered during the planning and execution of research projects. This paper outlines strategies for using technology transfer in NDE research and presents a wide variety of technology transfer methods used by a cooperative...

  9. Technology Games: Using Wittgenstein for Understanding and Evaluating Technology.

    Science.gov (United States)

    Coeckelbergh, Mark

    2017-08-15

    In the philosophy of technology after the empirical turn, little attention has been paid to language and its relation to technology. In this programmatic and explorative paper, it is proposed to use the later Wittgenstein, not only to pay more attention to language use in philosophy of technology, but also to rethink technology itself-at least technology in its aspect of tool, technology-in-use. This is done by outlining a working account of Wittgenstein's view of language (as articulated mainly in the Investigations) and by then applying that account to technology-turning around Wittgenstein's metaphor of the toolbox. Using Wittgenstein's concepts of language games and form of life and coining the term 'technology games', the paper proposes and argues for a use-oriented, holistic, transcendental, social, and historical approach to technology which is empirically but also normatively sensitive, and which takes into account implicit knowledge and know-how. It gives examples of interaction with social robots to support the relevance of this project for understanding and evaluating today's technologies, makes comparisons with authors in philosophy of technology such as Winner and Ihde, and sketches the contours of a phenomenology and hermeneutics of technology use that may help us to understand but also to gain a more critical relation to specific uses of concrete technologies in everyday contexts. Ultimately, given the holism argued for, it also promises a more critical relation to the games and forms of life technologies are embedded in-to the ways we do things.

  10. Evaluating Internal Technological Capabilities in Energy Companies

    Directory of Open Access Journals (Sweden)

    Mingook Lee

    2016-03-01

    Full Text Available As global competition increases, technological capability must be evaluated objectively as one of the most important factors for predominance in technological competition and to ensure sustainable business excellence. Most existing capability evaluation models utilize either quantitative methods, such as patent analysis, or qualitative methods, such as expert panels. Accordingly, they may be in danger of reflecting only fragmentary aspects of technological capabilities, and produce inconsistent results when different models are used. To solve these problems, this paper proposes a comprehensive framework for evaluating technological capabilities in energy companies by considering the complex properties of technological knowledge. For this purpose, we first explored various factors affecting technological capabilities and divided the factors into three categories: individual, organizational, and technology competitiveness. Second, we identified appropriate evaluation items for each category to measure the technological capability. Finally, by using a hybrid approach of qualitative and quantitative methods, we developed an evaluation method for each item and suggested a method to combine the results. The proposed framework was then verified with an energy generation and supply company to investigate its practicality. As one of the earliest attempts to evaluate multi-faceted technological capabilities, the suggested model can support technology and strategic planning.

  11. Technology evaluation for time sensitive data transport

    DEFF Research Database (Denmark)

    Wessing, Henrik; Breach, Tony; Colmenero, Alberto

    . The NREN communities must provide underlying network infrastructures and transport technologies to facilitate ser-vices with such requirements to the network. In this paper we investigate and evaluate circuit and packet based transport technologies from classic best effort IP over MPLS flavours, Provider...... Backbone Bridging (PBB), “Transparent Interconnect of Lots of Links” (TRILL) to Optical Transport Network (OTN) and SDH. The transport technologies are evaluated theoreti-cally, using simulations and/or experimentally. Each transport technology is evaluated based on its performances and capabilities...... overhead and restoration time. Thirdly, complexity and automation possibilities for establishment of paths for high demanding applica-tions, and finally how the technologies are backed by research communities and major vendors like Ciena, Alcatel-Lucent, Nokia-Siemens and Huawei. The technologies...

  12. Evaluation of the cleaner technology programme

    DEFF Research Database (Denmark)

    Andersen, Mikael Skou; Jørgensen, Ulrik

    The report presents an independent evaluation of the Danish development programme for cleaner technology 1986-1989 and of the Action Plan for Cleaner Technology 1990-1992. The evaluation focuses on the results of technology development and implementation projects, on an examination...... of the dissemination of cleaner technology solutions achieved in six industrial branches, and on the overall programme and its effects, in particular environmental impacts, but also results in the form of employment, environmental export, strenghtening of Danish know-how etc....

  13. Clean Technology Evaluation & Workforce Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Patricia Glaza

    2012-12-01

    The overall objective of the Clean Technology Evaluation portion of the award was to design a process to speed up the identification of new clean energy technologies and match organizations to testing and early adoption partners. The project was successful in identifying new technologies targeted to utilities and utility technology integrators, in developing a process to review and rank the new technologies, and in facilitating new partnerships for technology testing and adoption. The purpose of the Workforce Development portion of the award was to create an education outreach program for middle & high-school students focused on clean technology science and engineering. While originally targeting San Diego, California and Cambridge, Massachusetts, the scope of the program was expanded to include a major clean technology speaking series and expo as part of the USA Science & Engineering Festival on the National Mall in Washington, D.C.

  14. National Security Technology Incubator Evaluation Process

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2007-12-31

    This report describes the process by which the National Security Technology Incubator (NSTI) will be evaluated. The technology incubator is being developed as part of the National Security Preparedness Project (NSPP), funded by a Department of Energy (DOE)/National Nuclear Security Administration (NNSA) grant. This report includes a brief description of the components, steps, and measures of the proposed evaluation process. The purpose of the NSPP is to promote national security technologies through business incubation, technology demonstration and validation, and workforce development. The NSTI will focus on serving businesses with national security technology applications by nurturing them through critical stages of early development. An effective evaluation process of the NSTI is an important step as it can provide qualitative and quantitative information on incubator performance over a given period. The vision of the NSTI is to be a successful incubator of technologies and private enterprise that assist the NNSA in meeting new challenges in national safety and security. The mission of the NSTI is to identify, incubate, and accelerate technologies with national security applications at various stages of development by providing hands-on mentoring and business assistance to small businesses and emerging or growing companies. To achieve success for both incubator businesses and the NSTI program, an evaluation process is essential to effectively measure results and implement corrective processes in the incubation design if needed. The evaluation process design will collect and analyze qualitative and quantitative data through performance evaluation system.

  15. Development and application of the RE-AIM QuEST mixed methods framework for program evaluation

    Directory of Open Access Journals (Sweden)

    Jane Forman

    2017-06-01

    The RE-AIM QuEST framework may be a useful tool for improving interventions in real-time, for understanding retrospectively why an intervention did or did not work, and for enhancing its sustainability and translation to other settings.

  16. Technology evaluation: adalimumab, Abbott laboratories.

    Science.gov (United States)

    Lorenz, Hanns M

    2002-04-01

    Adalimumab (D2E7), a human monoclonal antibody that binds to and neutralizes TNFa, is being developed by Abbott (formerly Knoll), under license from Cambridge Antibody Technology (CAT), for the potential treatment of inflammatory disorders such as rheumatoid arthritis (RA) and Crohn's disease. It is also being investigated for the potential treatment of coronary heart disease. Phase II studies for Crohn's disease and phase III for RA were ongoing throughout 2001. Limited data are only available for RA. In January 2002, it was reported that phase III trials of adalimumab for RA had been completed, but details have not been published in the primary literature so far. At this time CAT and Abbott expected to file for US approval in the second quarter of 2002 with a launch date anticipated for 2003. Phase III data are expected to be presented at the European League Against Rheumatism meeting in June 2002. In November 2000, Lehman Brothers predicted a US launch in June 2002 with peak US sales of $600 million in 2007 and a launch in non-US markets in 2003 with peak sales in these markets of $300 million in 2008. In December 2000, Merrill Lynch predicted regulatory clearance in the second half of 2003. The probability of adalimumab reaching the market is estimated to be 70%. In December 2000, Merrill Lynch predicted a 2003 launch, with estimated sales of pounds sterling 3.65 million in that year rising to pounds sterling 30.14 million in 2010. In March 2001, ABN AMRO predicted sales of $73 million in 2003 rising to $392 million in 2007.

  17. Evaluative conditioning of food technologies in China

    DEFF Research Database (Denmark)

    Loebnitz, Natascha; Grunert, Klaus G

    2014-01-01

    This study provides an initial examination of the evaluative conditioning (EC) of consumers’ attitudes toward food technologies in China, including how EC can affect consumer acceptance of new technology when participants possess different levels of social trust. In a study using the EC paradigm...... and a combination of between-subjects control groups and within-subjects control conditions, participants considered three food technologies (conventional, enzyme, and genetic), paired with affectively positive, neutral, and negative images. Subsequent evaluative measurements revealed that EC can explain attitude...... formation toward food technologies in China when consumers see affective images, but the strength of the effects varies at different levels of social trust. Participants with a high level of trust in the institutions that promote and regulate the technologies can be conditioned both positively...

  18. Sustainability evaluation of water supply technologies

    DEFF Research Database (Denmark)

    Godskesen, Berit

    Sustainability evaluation of water supply systems is important to include in the decision making process when planning new technologies or resources for water supply. In Denmark the motivations may be many and different for changing technology, but since water supply is based on groundwater...... the main driver is the limitations of the available resource from the groundwater bodies. The environmental impact of products and systems can be evaluated by life-cycle assessment (LCA) which is a comprehensive and dominant decision support tool capable of evaluating a water system from the cradle......-criteria decision analysis method was used to develop a decision support system and applied to the study. In this thesis a standard LCA of the drinking water supply technology of today (base case) and 4 alternative cases for water supply technologies is conducted. The standard LCA points at the case rain...

  19. Utilising digital technology for dialogue and evaluation

    DEFF Research Database (Denmark)

    Kjærgaard, Thomas

    2016-01-01

    This article investigates how digital technology can enhance evaluation and eflection through dialogue in a theory lesson in the context of university college teaching. The pedagogical designs in the article vary from synchronous classroom evaluation on smartphones, to online discussion fora...

  20. TEXACO GASIFICATION PROCESS - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report summarizes the evaluation of the Texaco Gasification Process (TGP) conducted under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program. The Texaco Gasification Process was developed by Texaco Inc. The TGP is a comm...

  1. Utilising digital technology for dialogue and evaluation

    DEFF Research Database (Denmark)

    Kjærgaard, Thomas

    2016-01-01

    This article investigates how digital technology can enhance evaluation and reflection through dialogue in a theory lesson in the context of university college teaching. The pedagogical designs in the article vary from synchronous classroom evaluation on smartphones, to online discussion fora...

  2. Health technology assessment. Evaluation of biomedical innovative technologies.

    Science.gov (United States)

    Turchetti, Giuseppe; Spadoni, Enza; Geisler, Eliezer Elie

    2010-01-01

    This article describes health technology assessment (HTA) as an evaluation tool that applies systematic methods of inquiry to the generation and use of health technologies and new products. The focus of this article is on the contributions of HTA to the management of the new product development effort in the biomedical organization. Critical success factors (CSFs) are listed, and their role in assessing success is defined and explained. One of the conclusions of this article is that HTA is a powerful tool for managers in the biomedical sector, allowing them to better manage their innovation effort in their continuing struggle for competitiveness and survival.

  3. Evaluation du stock de coquilles Saint-Jacques de la Manche-Est - Campagne COMOR XXIV N.O. Thalia

    OpenAIRE

    Vigneau, Joel; Lemoine, Michel

    1994-01-01

    Tous les ans depuis 1976, le laboratoire "RESSOURCES HALIEUTIQUES" de PORT-EN-BESSIN effectue une campagne d'évaluation sur les coquilles Saint-Jacques en Manche-Est; Les objectifs en sont une évaluation des stocks avec estimation de la biomasse exploitable, de la qualité du recrutement (prochaine génération à entrer dans les captures) et du pré-recrutement (dernière génération née, non encore accessible aux engins par la taille), et des paramètres de croissance. Toutes ces données servent de...

  4. Performance Evaluation Methods for Assistive Robotic Technology

    Science.gov (United States)

    Tsui, Katherine M.; Feil-Seifer, David J.; Matarić, Maja J.; Yanco, Holly A.

    Robots have been developed for several assistive technology domains, including intervention for Autism Spectrum Disorders, eldercare, and post-stroke rehabilitation. Assistive robots have also been used to promote independent living through the use of devices such as intelligent wheelchairs, assistive robotic arms, and external limb prostheses. Work in the broad field of assistive robotic technology can be divided into two major research phases: technology development, in which new devices, software, and interfaces are created; and clinical, in which assistive technology is applied to a given end-user population. Moving from technology development towards clinical applications is a significant challenge. Developing performance metrics for assistive robots poses a related set of challenges. In this paper, we survey several areas of assistive robotic technology in order to derive and demonstrate domain-specific means for evaluating the performance of such systems. We also present two case studies of applied performance measures and a discussion regarding the ubiquity of functional performance measures across the sampled domains. Finally, we present guidelines for incorporating human performance metrics into end-user evaluations of assistive robotic technologies.

  5. Involving stakeholders in evaluating environmental restoration technologies

    International Nuclear Information System (INIS)

    McCabe, G.H.; Serie, P.J.

    1993-02-01

    Involving citizens, interest groups, and regulators in environmental restoration and waste management programs is a challenge for government agencies and the organizations that support them. To be effective, such involvement activities must identify all individuals and groups who have a stake in the cleanup. Their participation must be early, substantive, and meaningful. Stockholders must be able to see how their input was considered and used, and feel that a good- faith effort was made to reconcile conflicting objectives. The Integrated Demonstration for Cleanup of Volatile Organic Compounds at Arid Sites (VOC-Arid ID) is a Department of Energy Office of Technology Development project located at Hanford. Along with technical evaluation of innovative cleanup technologies, the program is conducting an institutional assessment of regulatory and public acceptance of new technologies. Through a series of interviews and workshops, and use of a computerized information management tool, stakeholders are having a voice in the evaluation. Public and regulatory reaction has been positive

  6. Evaluating Basic Technology Instruction in Nigerian Secondary ...

    African Journals Online (AJOL)

    It is an important technique which when appropriately adopted results into effective teaching and learning of practical subjects. This study focused on identification of evaluating techniques aimed at improving the teaching of Basic technology in Edo State. The area of study comprises of the eighteen Local Government Areas ...

  7. Technology Evaluation Report: Non-destructive ...

    Science.gov (United States)

    Technology Evaluation Report HSRP is working to develop tools and information that will help detect the intentional introduction of chemical or biological contaminants in buildings or water systems, the containment of these contaminants, the decontamination of buildings and/or water systems, and the management of wastes generated from decontamination and cleanup operations. Evaluation of the performance of CBI Polymers’ DeconGelTM 1108, Environmental Alternatives, Inc.’s (EAI’s) Rad-Release II (RRII), Environmental Alternatives, Inc.’s SuperGel, and Intek Technologies’ LH-21. The objective of evaluating these technologies was to test their ability to remove radioactive cesium (Cs)-137 from the mixed building material coupons of brick with mortar, tile with grout, granite with mortar, all mortar and all grout coupons.

  8. Energy technology evaluation report: Energy security

    Science.gov (United States)

    Koopman, R.; Lamont, A.; Schock, R.

    1992-09-01

    Energy security was identified in the National Energy Strategy (NES) as a major issue for the Department of Energy (DOE). As part of a process designed by the DOE to identify technologies important to implementing the NES, an expert working group was convened to consider which technologies can best contribute to reducing the nation's economic vulnerability to future disruptions of world oil supplies, the working definition of energy security. Other working groups were established to deal with economic growth, environmental quality, and technical foundations. Energy Security working group members were chosen to represent as broad a spectrum of energy supply and end-use technologies as possible and were selected for their established reputations as experienced experts with an ability to be objective. The time available for this evaluation was very short. The group evaluated technologies using criteria taken from the NES which can be summarized for energy security as follows: diversifying sources of world oil supply so as to decrease the increasing monopoly status of the Persian Gulf region; reducing the importance of oil use in the US economy to diminish the impact of future disruptions in oil supply; and increasing the preparedness of the US to deal with oil supply disruptions by having alternatives available at a known price. The result of the first phase of the evaluation process was the identification of technology groups determined to be clearly important for reducing US vulnerability to oil supply disruptions. The important technologies were mostly within the high leverage areas of oil and gas supply and transportation demand but also included hydrogen utilization, biomass, diversion resistant nuclear power, and substitute industrial feedstocks.

  9. Technologies for evaluating fish passage through turbines

    Energy Technology Data Exchange (ETDEWEB)

    Weiland, Mark A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carlson, Thomas J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2003-10-01

    This study evaluated the feasibility of two types of technologies to observe fish and near neutrally buoyant drogues as they move through hydropower turbines. Existing or reasonably modified light-emitting and ultrasonic technologies were used to observe flow patterns, the response of fish to flow, and interactions between fish and turbine structures with good spatial and temporal accuracy. This information can be used to assess the biological benefits of turbine design features such as reductions in gaps at the tips and hub of turbine runner blades, reshaping wicket gates and stay vanes, modifications to draft tube splitter piers, and design changes that enhance egress through the powerhouse and tailrace.

  10. Performance evaluation soil samples utilizing encapsulation technology

    Science.gov (United States)

    Dahlgran, James R.

    1999-01-01

    Performance evaluation soil samples and method of their preparation using encapsulation technology to encapsulate analytes which are introduced into a soil matrix for analysis and evaluation by analytical laboratories. Target analytes are mixed in an appropriate solvent at predetermined concentrations. The mixture is emulsified in a solution of polymeric film forming material. The emulsified solution is polymerized to form microcapsules. The microcapsules are recovered, quantitated and introduced into a soil matrix in a predetermined ratio to form soil samples with the desired analyte concentration.

  11. Estímulos ao Desenvolvimento Tecnológico: Influência do Mercado Driving Forces for Technology Development: Market

    Directory of Open Access Journals (Sweden)

    José de A. Cid

    2002-01-01

    Full Text Available Hoje em dia não se discute mais a importância da Pesquisa e Desenvolvimento para a sobrevivência e longevidade de uma Empresa. Todo tipo de indústria sente o impacto do aumento da competição e da velocidade dos avanços tecnológicos. Entretanto, os recursos estão escassos, tanto para as despesas necessárias às atividades de negócio quanto para a pesquisa, o que deixa os gerentes com a difícil tarefa de decidir onde os recursos serão aplicados. Anos atrás, quando os recursos eram (aparentemente ilimitados a força que impulsionava a pesquisa era o desafio da descoberta do novo. A complexidade do processo, os intricados métodos de análise, a quebra de barreiras do conhecimento, alimentavam as mentes dos cientistas. Depois da pesquisa, os profissionais de marketing deveriam encontrar mercados para os novos produtos. Atualmente a pesquisa de mercado, as ferramentas de análise de negócio e outros aspectos outrora desconhecidos dos cientistas dominam as mesas dos gerentes. Este artigo descreve três diferentes abordagens na distribuição de recursos para pesquisa e resume alguns dos princípios que ajudam as empresas a funcionar melhor.Nowadays the importance of Research and Development to a Company survival and longevity is well known. Virtually every industry feels the impact of increased competition and the fast pace of technology change. However, resources are getting scarce, both for doing business and research as well, leaving managers with the tough job of selecting which project will get funding. Years ago, when money was (seemingly unlimited the driving force to research was the challenge of inventing something new. The process complexity, the intricate analysis methods, the breaking of new frontiers were the food for the scientists inquiring minds. Then marketing professionals had to work to find or create market. Now market research, business analysis tools and other aspects once unknown to scientists rule. This article

  12. An evaluation of supersonic STOVL technology

    Science.gov (United States)

    Kidwell, G. H., Jr.; Lampkin, B. A.

    1983-01-01

    The purpose of this paper is to document the status of supersonic STOVL aircraft technology. The major focus is the presentation of summaries of pertinent aspects of supersonic STOVL technology, such as justification for STOVL aircraft, current designs and their recognized areas of uncertainty, recent research programs, current activities, plans, etc. The remainder of the paper is an evaluation of the performance differential between a current supersonic STOVL design and three production (or near production) fighters, one of them the AV-8B. The results indicate that there is not a large range difference between a STOL aircraft and a STOVL aircraft, and that other aspects of performance, such as field performance or combat maneuverability, may more than make up for this decrement.

  13. Understanding Technology Literacy: A Framework for Evaluating Educational Technology Integration

    Science.gov (United States)

    Davies, Randall S.

    2011-01-01

    Federal legislation in the United States currently mandates that technology be integrated into school curricula because of the popular belief that learning is enhanced through the use of technology. The challenge for educators is to understand how best to teach with technology while developing the technological expertise of their students. This…

  14. Development of technology for next generation reactor - Research of evaluation technology for nuclear power plant -

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jong Kyun; Chang, Moon Heuy; Hwang, Yung Dong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)] [and others

    1993-09-01

    For development of next generation reactor, a project for evaluation technology for nuclear power plant is performed. Evaluation technology is essential to next generation reactor for reactor safety and system analysis. For design concept, detailed evaluation technologies are studied as follows: evaluation of safety margin, evaluation of safety facilities, evaluation of measurement and control technology; man-machine interface. Especially for thermal efficiency, thermal properties and chemical composition of inconel 690 tube, instead of inconel 600 tube, are measured for steam generator. (Author).

  15. A Study of KHNP Nuclear Power Plant Technology Level Evaluation

    International Nuclear Information System (INIS)

    Yang, Seung Han; Lee, Sung Jin; Kim, Yo Han

    2016-01-01

    KHNP's 2030 mid and long term plan goal in technology field is securing global No. 1 NPP technology level. Quantifying technology level for this purpose, technology level at present should be surveyed. Technology level of South Korea has been surveyed by KISTEP (Korea Institute of S and T Evaluation and Planning) every two year but the technology level of KHNP has not been surveyed by any organization including KHNP itself. Also the size of technology surveyed by KISTEP was too broad to quantifying technology level of KHNP. In this paper, technology level of KHNP and South Korea are presented. In this study, NPP related technologies were divided into Level I and Level II technologies and conducted a survey for each Level II technologies using Delphi questionnaire survey that is widely used in technology level evaluation. The results of technology level and gap will be used from strategic point of view and also as a reference data for technology improvement planning

  16. A Study of KHNP Nuclear Power Plant Technology Level Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Seung Han; Lee, Sung Jin; Kim, Yo Han [KHNP, Daejeon (Korea, Republic of)

    2016-05-15

    KHNP's 2030 mid and long term plan goal in technology field is securing global No. 1 NPP technology level. Quantifying technology level for this purpose, technology level at present should be surveyed. Technology level of South Korea has been surveyed by KISTEP (Korea Institute of S and T Evaluation and Planning) every two year but the technology level of KHNP has not been surveyed by any organization including KHNP itself. Also the size of technology surveyed by KISTEP was too broad to quantifying technology level of KHNP. In this paper, technology level of KHNP and South Korea are presented. In this study, NPP related technologies were divided into Level I and Level II technologies and conducted a survey for each Level II technologies using Delphi questionnaire survey that is widely used in technology level evaluation. The results of technology level and gap will be used from strategic point of view and also as a reference data for technology improvement planning.

  17. Nondestructive quality evaluation technology of agricultural products

    International Nuclear Information System (INIS)

    Noh, Sang Ha

    1997-01-01

    Quality evaluation of agricultural products has been interested to many researchers for many years and as the result, several nondestructive techniques and so many papers have been reported for quality evaluation of agricultural products. These nondestructive techniques are based on the detection of mechanical, optical, electrical, electro-magnetical, dielectric and vibrational properties of agricultural products that are well correlated with certain quality factors of the products such as color, shape, firmness, sugar content, external or internal defects, moisture content, etc. The sophistication of nondestructive methods has evolved rapidly with modem technologies. In this paper an emphasis was put on reviewing some of those papers and techniques which could be led to on-line measurement for practical use.

  18. Technology Evaluation for Environmental Risk Mitigation Compendium

    Science.gov (United States)

    Meinhold, A.; Greene, B.; Dussich, J.; Sorkin, A.; Olsen, W.

    2017-01-01

    The Technology Evaluation for Environmental Risk Mitigation (TEERM) Principal Center and its predecessor organization the Acquisition Pollution Prevention Program (AP2) supported the National Aeronautics and Space Administration (NASA) in identifying technology solutions to risks and costs to NASA programs driven by environmental regulations and requirements. TEERM researched the commercial and government marketplace to locate viable and available technologies that met NASAs needs. TEERM focused on addressing environmentally-driven risks of direct concern to NASA programs and facilities, including hazardous materials in NASA operations and materials that became obsolescent because of environmental regulations. TEERM projects aimed to reduce cost; ensure the health and safety of people, assets, and the environment; promote efficiency; and minimize duplication. Major TEERM and AP2 projects focused on waste minimization and hazardous waste treatment, recycling, corrosion prevention and control, solvent and ozone depleting substances substitution, and aqueous based cleaners. In 2017, NASA made the decision to terminate the TEERM Principal Center. This Compendium Report documents TEERM and AP2 project successes. The Compendium Report traces the evolution of TEERM based on evolving risks and requirements for NASA and its relationship to the Space Shuttle Program, the United States Department of Defense, the European Space Agency, and other public and private stakeholders. This Compendium Report also documents project details from Project Summaries and Joint Test Plans and describes project stakeholders and collaborative effort results.

  19. Evaluating technologies of oil spill surveillance

    International Nuclear Information System (INIS)

    Hover, G.L.

    1993-01-01

    Surveillance and monitoring of oil in the marine environment imposes a broad spectrum of remote sensing requirements. At the US Coast Guard Research ampersand Development Center, the environmental safety branch is sponsoring oil spill remote sensing research in four areas of technology: Synthetic aperture radar (SAR), Frequency-scanning microwave radiometry (FSR), Laser fluorosensing (LFS), and Forward-looking infrared (FLIR) imagers. SAR technology uses sophisticated signal processing to overcome prior limitations, providing images of higher and more uniform spatial acuity which may enable interpreters to more-readily distinguish petroleum slicks from others. The ability to determine the distribution of oil thickness within a slick is necessary when an estimate of oil volume is desired. Scientists at MIT have formulated a new approach to radiometric oil thickness measurement that takes advantage of recent advances in electronic component technology. The initial data collected with a prototype FSR instrument have validated the FSR concept and more work is ongoing. The Coast Guard is co-funding a program to demonstrate and evaluate the capabilities of an airborne laser fluorosensor to support oil spill response operations. During a controlled test, the instrument successfully demonstrated an ability to detect oil on water, ice, and various beach surfaces. Additional testing included different oil types and allowed for weathering. Data analysis is ongoing. Recent developments in infrared imager technology have produced a wide variety of off-the-shelf, portable cameras that could potentially provide a rapid-response spill assessment capability. The R ampersand D Center has been involved in the testing of many of these sensors

  20. DYNAPHORE, INC., FORAGER SPONGE TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The Forager Sponge is a volume reduction technology in which heavy metal contaminants from an aqueous medium are selectively concentrated into a smaller volume for facilitated disposal. he technology treats contaminated groundwater, surface voters and porous waters by absorbing d...

  1. Evaluating Technology Resistance and Technology Satisfaction on Students' Performance

    Science.gov (United States)

    Norzaidi, Mohd Daud; Salwani, Mohamed Intan

    2009-01-01

    Purpose: Using the extended task-technology fit (TTF) model, this paper aims to examine technology resistance, technology satisfaction and internet usage on students' performance. Design/methodology/approach: The study was conducted at Universiti Teknologi MARA, Johor, Malaysia and questionnaires were distributed to 354 undergraduate students.…

  2. Development of inspection safety evaluation technology

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Seok Chul; Yoon, Yeo Chang; Kim, Jong Soo; Lee, Tae Young; Kim, Chang Ryol; Lee, Hyung Sub; Kim, Jong Soo

    1995-12-01

    The purpose of this project is to protection nation inspector`s over exposure from radiation that can be occurred by inspection activity at nuclear facilities and its environment, and to ensure the safety of inspection activity at the nuclear facilities. To effectively carry out the domestic inspection task to be enforced from 1996, the evaluation for special radiation exposure rate of nuclear facilities, air and surface contamination level, and measurement and monitoring of water contamination level were made to determine whether these measured values exceeded permissible limitations, and to protect the inspector`s over exposure from radiation at domestic nuclear facilities. Management of inspector`s exposure was carried out under assistance of the Department of Health Physics. Performance tests of two gamma detectors, one neutron detector, alpha and beta detector, and gamma spectroscopy analyzer were carried out to control dose on extremity, the characteristic test for extremity dosimeter was carried out and the theoretical calculation of gamma dose conversion factors based on ANSI N13.32 standard was performed. Under the 93+2 program, IAEA began to recognize the necessity of environmental observation technology development of air-borne particulates travelled from long distance location. Associated with the necessity of this technology development, a proposal of international joint research for development of the special radiation measurement and analysis has been prepared. (author). 21 tabs., 24 figs., 20 refs.

  3. Technology evaluation: SAGE, Genzyme molecular oncology.

    Science.gov (United States)

    Bartlett, J

    2001-02-01

    Genzyme Molecular Oncology (GMO) is using its SAGE (Serial Analysis of Gene Expression) combinatorial chemistry technology to screen compound libraries. SAGE is a high-throughput, high-efficiency method to simultaneously detect and measure the expression levels of genes expressed in a cell at a given time, including rare genes. SAGE can be used in a wide variety of applications to identify disease-related genes, to analyze the effect of drugs on tissues and to provide insights into disease pathways. It works by isolating short fragments of genetic information from the expressed genes that are present in the cell being studied. These short sequences, called SAGE tags, are linked together for efficient sequencing. The sequence data are then analyzed to identify each gene expressed in the cell and the levels at which each gene is expressed. This information forms a library that can be used to analyze the differences in gene expression between cells [293437]. By December 1999, GMO had identified a set of 40 genes from 3.5 million transcripts that were expressed at elevated levels in all cancer tissue but not seen in normal tissue. The company hope these may provide diagnostic markers or therapeutic targets. The studies also provided data furthering the understanding of the way cells use their genome [349968]. GMO has signed a collaborative agreement with the National Cancer Institute (NCI) to search for new drug candidates in the field of cancer chemotherapy. The collaboration combines GMO's SAGE technology with the NCI's extensive array of 60 cell-based cancer screens. Under the agreement, the NCI will evaluate Genzyme's library consisting of one million compounds against selected cancer screens to identify compounds with anticancer properties [255082]. Xenometrix granted a license agreement for gene expression profiling to GMO in February 1999, giving company access to claims covered in issued US and European patents. The license is non-exclusive and covers the

  4. ECONOMIC EVALUATION OF CO2 SEQUESTRATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Bert R. Bock; Richard G. Rhudy; David E. Nichols

    2001-07-01

    In order to plan for potential CO{sub 2} mitigation mandates, utilities need better information on CO{sub 2} mitigation options, especially carbon sequestration options that involve non-utility operations. One of the major difficulties in evaluating CO{sub 2} sequestration technologies and practices, both geologic storage of captured CO{sub 2} and storage in biological sinks, is obtaining consistent, transparent, accurate, and comparable economics. This project is comparing the economics of major technologies and practices under development for CO{sub 2} sequestration, including captured CO{sub 2} storage options such as active oil reservoirs, depleted oil and gas reservoirs, deep aquifers, coal beds, and oceans, as well as the enhancement of biological sinks such as forests and croplands. An international group of experts has been assembled to compare on a consistent basis the economics of this diverse array of CO{sub 2} sequestration options. Designs and data collection are nearly complete for each of the CO{sub 2} sequestration options being compared. Initial spreadsheet development has begun on concepts involving storage of captured CO{sub 2}. No significant problems have been encountered, but some additional outside expertise will be accessed to supplement the team's expertise in the areas of life cycle analysis, oil and gas exploration and production, and comparing CO{sub 2} sequestration options that differ in timing and permanence of CO{sub 2} sequestration. Plans for the next reporting period are to complete data collection and a first approximation of the spreadsheet. We expect to complete this project on time and on budget.

  5. REMEDIATION TECHNOLOGY EVALUATION AT THE GILT EDGE MINE, SOUTH DAKOTA

    Science.gov (United States)

    This document reports the findings of the Mine Waste Technology Program's Activity III, Project 29,The Remediation Technology Evaluation Project at the Gilt Edge Mine, S.D. This project consisted of evaluating three emerging acidic waste rock stabilization technologies and compar...

  6. Evaluation of Smart Gun Technologies preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, D.R.

    1996-01-01

    The Smart Gun Technology Project has a goal to eliminate the capability of an unauthorized user from firing a law enforcement officer`s firearm by implementing {open_quote}smart{close_quote} technologies. Smart technologies are those that can in some manner identify an officer. This report will identify, describe, and grade various technologies as compared to the requirements that were obtained from officers. This report does not make a final recommendation for a smart gun technology, nor does it give the complete design of a smart gun system.

  7. Assistive Technology for Persons with Physical Disabilities: Evaluation and Outcomes

    NARCIS (Netherlands)

    Rigby, P.J.

    2009-01-01

    This thesis presents a compilation of published studies that evaluated assistive technology interventions for children and adults with physical disabilities. The first chapter introduces the need for and the challenges involved in studying the outcomes of assistive technology interventions. The

  8. Evaluacion de la sostenibilidad de la arquitectura, aspectos sociales, culturales, estética e hitos : Evaluation of architecture sustainability, social aspects, lacks, esthetics culturally and milestones

    Directory of Open Access Journals (Sweden)

    Raul Cordero Gulá

    2015-12-01

    Full Text Available Los países emergentes en general son poco consumidores de energía, por tanto tienen poca influencia en la huella de carbono y el daño ecológico al planeta, pero tienen muchas carencias sociales como la falta de vivienda, servicios, problemas de salud, falta de trabajo, etc. Por eso merecen tener una herramienta de evaluación de sostenibilidad arquitectónica que considere todos estos aspectos evaluados desde la óptica de cada cultura y en la que el peso de aspectos como la huella de carbono o el consumo energético no sea el único. Por otra parte esta herramienta evalúa la estética y los hitos arquitectónicos como parte de los aspectos sociales que deberían evaluarse en el mundo, y la propuesta ha sido aplicada en edificios patrimoniales y contemporáneos, realizada como proyecto de investigación de la Universidad de Cuenca, en colaboración con la UPM. Abstract Emerging countries are generally low consumption of energy, and thus have little influence on the carbon footprint and ecological damage to the planet, but instead have many social needs such as homelessness, housing without services, health problems, unemployment, etc. Therefore they deserve an evaluation tool of architectural sustainability which considers the social, housing production, jobs, health, all evaluated from the perspective of each culture and the weight of aspects carbon footprint or energy consumption is not the only one. Moreover this tool evaluates the aesthetic and architectural landmarks as part of the social aspects that should also be evaluated worldwide, and the proposal has been applied in heritage and contemporary buildings, conducted as a research project at the University of Cuenca, in collaboration with UPM.

  9. EST! best practices

    Science.gov (United States)

    2000-10-05

    This booklet presents the eighteen winners in a competition for projects that promote environmentally sustainable transportation (EST). These range from car sharing to hydrogen fueled buses to public transit promotion campaign. Each project is presen...

  10. Improving early cycle economic evaluation of diagnostic technologies

    NARCIS (Netherlands)

    Steuten, Lotte Maria Gertruda; Ramsey, Scott D.

    2014-01-01

    The rapidly increasing range and expense of new diagnostics, compels consideration of a different, more proactive approach to health economic evaluation of diagnostic technologies. Early cycle economic evaluation is a decision analytic approach to evaluate technologies in development so as to

  11. DYNAPHORE, INC. FORAGER™ SPONGE TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The Forager™ Sponge is an open-celled cellulose sponge incorporating an amine-containing chelating polymer that selectively absorbs dissolved heavy metals from aqueous waste streams. The Developer states that the technology can be utilized to remove and concentrate heavy metals f...

  12. Evaluation of automated vehicle technology for transit.

    Science.gov (United States)

    2015-01-01

    The purpose of this report is to provide an overview of the state of automated vehicle (AV) technology : in transit. The Florida Department of Transportation (FDOT) wishes to know what AV technology is : currently available that could be used in tran...

  13. Healthy China 2020 : Policy and Technology Evaluation | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Framework for monitoring and evaluation of the health sector reform in China ... Le Conseil des gouverneurs félicite Jean Lebel pour son nouveau mandat au poste ... CDRI est heureux d'annoncer que le premier appel à candidatures pour les ...

  14. HIGH VOLTAGE ENVIRONMENTAL APPLICATIONS, INC.ELECTRON BEAM TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report evaluates a high-voltage electron beam (E-beam) technology's ability to destroy volatile organic compounds (VOCs) and other contaminants present in liquid wastes. Specifically, this report discusses performance and economic data from a Superfund Innovative Technology...

  15. Evaluation of User Acceptance of Mixed Reality Technology

    Science.gov (United States)

    Yusoff, Rasimah Che Mohd; Zaman, Halimah Badioze; Ahmad, Azlina

    2011-01-01

    This study investigates users' perception and acceptance of mixed reality (MR) technology. Acceptance of new information technologies has been important research area since 1990s. It is important to understand the reasons why people accept information technologies, as this can help to improve design, evaluation and prediction how users will…

  16. Addiction and technology: Plus ça change plus c'est la même (The more things change, the more they remain the same).

    Science.gov (United States)

    Sarin, Alok; Murthy, Pratima; Jain, Sanjeev

    2017-01-01

    Excessive use of the internet for gambling, gaming and behavioural addiction, are a focus of contemporary interest. The authors delve into the archives to explore the connections between the growth of various forms of technology, commerce, addictive behaviours and responses of the State, in colonial India. The interplay between the growth of the telegraph network in 19th century India, and its influence on various forms of gambling, including speculation on opium prices, and the rain, as a theme of wager make interesting stories, as do the governmental responses to these. Clinical and social responses to information technology raised much the same concerns as they do now.

  17. Analysis and evaluation of the applicability of green energy technology

    Science.gov (United States)

    Xu, Z. J.; Song, Y. K.

    2017-11-01

    With the seriousness of environmental issues and the shortage of resources, the applicability of green energy technology has been paid more and more attention by scholars in different fields. However, the current researches are often single in perspective and simple in method. According to the Theory of Applicable Technology, this paper analyzes and defines the green energy technology and its applicability from the all-around perspectives of symbiosis of economy, society, environment and science & technology etc., and correspondingly constructs the evaluation index system. The paper further applies the Fuzzy Comprehensive Evaluation to the evaluation of its applicability, discusses in depth the evaluation models and methods, and explains in detail with an example. The author holds that the applicability of green energy technology involves many aspects of economy, society, environment and science & technology and can be evaluated comprehensively by an index system composed of a number of independent indexes. The evaluation is multi-object, multi-factor, multi-level and fuzzy comprehensive, which is undoubtedly correct, effective and feasible by the Fuzzy Comprehensive Evaluation. It is of vital theoretical and practical significance to understand and evaluate comprehensively the applicability of green energy technology for the rational development and utilization of green energy technology and for the better promotion of sustainable development of human and nature.

  18. New Technologies, New Approaches to Evaluating Academic Productivity

    Science.gov (United States)

    Rich, Peter J.; West, Richard E.

    2012-01-01

    Technology has enabled a proliferation of publication venues for disseminating academic work. The task of evaluating the relative quality of each of these venues is simultaneously exacerbated and resolved by the use of new technologies. In this article, the authors propose a three-pronged framework for evaluating the quality of scholarly work that…

  19. Waste disposal technologies: designs and evaluations

    International Nuclear Information System (INIS)

    Shaw, R.A.

    1987-01-01

    Many states and compacts are presently in the throes of considering what technology to select for their low level waste disposal site. Both the technical and economic aspects of disposal technology are important considerations in these decisions. It is also important that they be considered in the context of the entire system. In the case of a nuclear power plant, that system encompasses the various individual waste streams that contain radioactivity, the processing equipment which reduces the volume and/or alters the form in which the radioisotopes are contained, the packaging of the processed wastes in shipment, and finally its disposal. One further part of this is the monitoring that takes place in all stages of this operation. This paper discusses the results of some research that has been sponsored by EPRI with the principal contractor being Rogers and Associates Engineering Corporation. Included is a description of the distinguishing features found in disposal technologies developed in a generic framework, designs for a selected set of these disposal technologies and the costs which have been derived from these designs. In addition, a description of the early efforts towards defining the performance of these various disposal technologies is described. 5 figures, 1 table

  20. Weapons of Mass Destruction Technology Evaluation and Training Range

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Larry Young

    2009-05-01

    The Idaho National Laboratory (INL) has a long history for providing technology evaluation and training for military and other federal level Weapons of Mass Destruction (WMD) response agencies. Currently there are many federal organizations and commercial companies developing technologies related to detecting, assessing, mitigating and protecting against hazards associated with a WMD event. Unfortunately, very few locations exist within the United States where WMD response technologies are realistically field tested and evaluated using real chemical, biological, radiological, nuclear and explosive materials. This is particularly true with biological and radiological hazards. Related to this lack of adequate WMD, multi-hazard technology testing capability is the shortage of locations where WMD response teams can train using actual chemical, biological, and radiological material or highly realistic simulates. In response to these technology evaluation and training needs, the INL has assembled a consortium of subject matter experts from existing programs and identified dedicated resources for the purpose of establishing an all-hazards, WMD technology evaluation and training range. The author describes the challenges associated with creating the all-hazards WMD technology evaluation and training range and lists the technical, logistical and financial benefits of an all-hazards technology evaluation and training range. Current resources and capabilities for conducting all-hazard technology evaluation and training at the INL are identified. Existing technology evaluation and training programs at the INL related to radiological, biological and chemical hazards are highlighted, including successes and lessons learned. Finally, remaining gaps in WMD technology evaluation and training capabilities are identified along with recommendations for closing those gaps.

  1. SANDIA NATIONAL LABORATORIES IN SITU ELECTROKINETIC EXTRACTION TECHNOLOGY; INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    As a part of the Superfund Innovative Technology Evaluation (SITE) Program, the U.S. Environmental Protection Agency evaluated the In-Situ Electrokinetic Extraction (ISEE) system at Sandia National Laboratories, Albuquerque, New Mexico.The SITE demonstration results show ...

  2. The current status of coal liquefaction technologies - Panorama 2008; La liquefaction du charbon: ou en est-on aujourd'hui? - Panorama 2008

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    In 2008, a first coal liquefaction unit to produce motor fuel (20,000 BPSD) will come on-stream in Shenhua, China (in the Ercos region of Inner Mongolia). Other, more ambitious projects have been announced in China for between now and 2020. Since oil production is expected to peak in the medium term, this technology may develop regionally in the next 20 years to cover ever-increasing demand for motor fuel.

  3. Assessment and evaluation of technologies for environmental restoration. Progress report

    International Nuclear Information System (INIS)

    Uzochukwu, G.A.

    1999-01-01

    Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites

  4. Assessment and evaluation of technologies for environmental restoration. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Uzochukwu, G. A. [North Carolina A and T State Univ., Greensboro, NC (United States)

    2000-06-30

    Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites.

  5. Assessment and evaluation of technologies for environmental restoration. Progress report

    International Nuclear Information System (INIS)

    Uzochukwu, G. A.

    2000-01-01

    Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites.

  6. Technology Validation: Fuel Cell Bus Evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, Leslie [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-01-02

    This presentation describing the FY 2016 accomplishments for the National Renewable Energy Laboratory's Fuel Cell Bus Evaluations project was presented at the U.S. Department of Energy Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Meeting, June 7, 2016.

  7. Technology evaluation for space station atmospheric leakage

    Energy Technology Data Exchange (ETDEWEB)

    Lemon, D.K.; Friesel, M.A.; Griffin, J.W.; Skorpik, J.R.; Shepard, C.L.; Antoniak, Z.I.; Kurtz, R.J.

    1990-02-01

    A concern in operation of a space station is leakage of atmosphere through seal points and through the walls as a result of damage from particle (space debris and micrometeoroid) impacts. This report describes a concept for a monitoring system to detect atmosphere leakage and locate the leak point. The concept is based on analysis and testing of two basic methods selected from an initial technology survey of potential approaches. 18 refs., 58 figs., 5 tabs.

  8. Students’ Perception on Teaching Practicum Evaluation using Video Technology

    Science.gov (United States)

    Chee Sern, Lai; ‘Ain Helan Nor, Nurul; Foong, Lee Ming; Hassan, Razali

    2017-08-01

    Video technology has been widely used in education especially in teaching and learning. However, the use of video technology for evaluation purpose especially in teaching practicum is extremely scarce and the benefits of video technology in teaching practicum evaluation have not yet been fully discovered. For that reason, this quantitative research aimed at identifying the perceptions of trainee teachers towards teaching practicum evaluation via video technology. A total of 260 students of Teacher Certification Programme (Program Pensiswazahan Guru - PPG) from the Faculty of Technical and Vocational Education (FPTV) of Universiti Tun Hussein Onn Malaysia (UTHM) had been randomly selected as respondents. A set of questionnaire was developed to assess the suitability, effectiveness and satisfaction of using video technology for teaching practicum. Conclusively, this research showed that the trainee teachers have positive perceptions in all three aspects related teaching practicum evaluation using video technology. Apart from that, no significant racial difference was found in the measured aspects. In addition, the trainee teachers also showed an understanding of the vast importance of teaching practicum evaluation via video. These research findings suggest that video technology can be a feasible and practical means of teaching practicum evaluation especially for distance learning program.

  9. Development and Evaluation of a Novel Set of EST-SSR Markers Based on Transcriptome Sequences of Black Locust (Robinia pseudoacacia L.).

    Science.gov (United States)

    Guo, Qi; Wang, Jin-Xing; Su, Li-Zhuo; Lv, Wei; Sun, Yu-Han; Li, Yun

    2017-07-07

    Black locust ( Robinia pseudoacacia L. of the family Fabaceae) is an ecologically and economically important deciduous tree. However, few genomic resources are available for this forest species, and few effective expressed sequence tag-derived simple sequence repeat (EST-SSR) markers have been developed to date. In this study, paired-end sequencing was used to sequence transcriptomes of R. pseudoacacia by the Illumina HiSeq TM2000 platform, and EST-SSR loci were identified by de novo assembly. Furthermore, a total of 1697 primer pairs were successfully designed, from which 286 primers met the selection screening criteria; 94 pairs were randomly selected and tested for validation using polymerase chain reaction amplification. Forty-five primers were verified as polymorphic, with clear bands. The polymorphism information content values were 0.033-0.765, the number of alleles per locus ranged from 2 to 10, and the observed and expected heterozygosities were 0.000-0.931 and 0.035-0.810, respectively, indicating a high level of informativeness. Subsequently, 45 polymorphic EST-SSR loci were tested for amplification efficiency, using the verified primers, in an additional nine species of Leguminosae, 23 loci were amplified in more than three species, of which two loci were amplified successfully in all species. These EST-SSR markers provide a valuable tool for investigating the genetic diversity and population structure of R . pseudoacacia , constructing a DNA fingerprint database, performing quantitative trait locus mapping, and preserving genetic information.

  10. Development of Technology for Structural Integrity Evaluation

    International Nuclear Information System (INIS)

    Choun, Young Sun; Choi, I. K.; Kim, M. K. and others

    2005-03-01

    The purpose of this study is a development of seismic safety and structural integrity evaluation method of the structure in the Nuclear Power plant (NPP). The purpose of 1st sub-Topic is the development and improvement of the seismic safety evaluation methodology for the Nuclear Power Plant structures and safety related equipment. The purpose of 2nd sub-topic is the increasing of structure and equipment seismic capacity through the reducing of seismic force. The purpose of 3rd sub-topic is the development of 3-D nonlinear finite element analysis program for prestressed concrete containment building. The last purpose if the evaluation of the failure mechanism of containment structure and structure capacity and the assessment of integrity of containment through the of leakage test. As a result of this research, there are many research results were produced. The scenario earthquake developing method was developed and the effect of the structures and equipment was analyzed. The effectiveness of isolation system was determined and optimum isolation systems for each equipment were selected. The NUCAS-3D program for the 3 dimensional numerical analysis of containment building using the embedded tendon element and rebar element was developed. The tension behavior of containment building was examined and the leakage rate of the concrete crack was determined. The results of this research can be successfully used for many fields of integrity of NPP site. It can be used for development of design earthquake for the seismic design and safety evaluation and establishment of seismic safety evaluation program and seismic capacity improvement program for existing NPP. In case of seismic isolation part, it can be used for the application to the selection of optimum isolation devices for equipment isolation and to the effective evaluation of each seismic isolation devices. In containment analysis part, it can be used for ultimate pressure capacity evaluation of prestressed concrete

  11. CitEST libraries

    Directory of Open Access Journals (Sweden)

    Maria Luísa P. Natividade Targon

    2007-01-01

    Full Text Available In order to obtain a better understanding of what is citrus, 33 cDNA libraries were constructed from different citrus species and genera. Total RNA was extracted from fruits, leaves, flowers, bark, seeds and roots, and subjected or not to different biotic and abiotic stresses (pathogens and drought and at several developmental stages. To identify putative promoter sequences, as well as molecular markers that could be useful for breeding programs, one shotgun library was prepared from sweet orange (Citrus sinensis var. Olimpia. In addition, EST libraries were also constructed for a citrus pathogen, the oomycete Phythophthora parasitica in either virulent or avirulent form. A total of 286,559 cDNA clones from citrus were sequenced from their 5’ end, generating 242,790 valid reads of citrus. A total of 9,504 sequences were produced in the shotgun library and the valid reads were assembled using CAP3. In this procedure, we obtained 1,131 contigs and 4,083 singletons. A total of 19,200 cDNA clones from P. parasitica were sequenced, resulting in 16,400 valid reads. The number of ESTs generated in this project is, to our knowledge, the largest citrus sequence database in the world.

  12. Panel 1 - comparative evaluation of deposition technologies

    Energy Technology Data Exchange (ETDEWEB)

    Fenske, G.R.; Stodolsky, F. [Argonne National Lab., IL (United States); Benson, D.K.; Pitts, R.J. [National Renewable Energy Lab., Golden, CO (United States); Bhat, D.G. [GTE Valenite Corp., Troy, MI (United States); Yulin Chen [Allison Gas Turbine Division, GM, Indianapolis, IN (United States); Gat, R.; Sunkara, M.K. [Case Western Reserve Univ., Cleveland, OH (United States); Kelly, M. [Stanford Univ., CA (United States); Lawler, J.E. [Univ. of Wisconsin, Madison (United States); Nagle, D.C. [Martin Marietta Labs., Baltimore, MD (United States); Outka, D. [Sandia National Laboratories, Livermore, CA (United States); Revankar, G.S. [Deere & Co., Moline, IL (United States); Subramaniam, V.V. [Ohio State Univ., Columbus (United States); Wilbur, P.J. [Colorado State Univ., Fort Collins (United States); Mingshow Wong [Northwestern Univ., Evanston, IL (United States); Woolam, W.E. [Southwest Research Inst., Arlington, VA (United States)

    1993-01-01

    This working group attempted to evaluate/compare the different types of deposition techniques currently under investigation for depositing diamond and diamond-like carbon films. A table lists the broad types of techniques that were considered for depositing diamond and diamond-like carbon films. After some discussion, it was agreed that any evaluation of the various techniques would be dependent on the end application. Thus the next action was to list the different areas where diamond and DLC films could find applications in transportation. These application areas are listed in a table. The table intentionally does not go into great detail on applications because that subject is dealt with specifically by Panel No. 4 - Applications To Transportation. The next action concentrated on identifying critical issues or limitations that need to be considered in evaluating the different processes. An attempt was then made to rank different broad categories of deposition techniques currently available or under development based on the four application areas and the limitations. These rankings/evaluations are given for diamond and DLC techniques. Finally, the working group tried to identify critical development and research issues that need to be incorporated into developing a long-term program that focuses on diamond/DLC coatings for transportation needs. 5 tabs.

  13. Evaluation of Recent Technologies of Nonvolatile RAM

    Science.gov (United States)

    Nuns, Thierry; Duzellier, Sophie; Bertrand, Jean; Hubert, Guillaume; Pouget, Vincent; Darracq, FrÉdÉric; David, Jean-Pierre; Soonckindt, Sabine

    2008-08-01

    Two types of recent nonvolatile random access memories (NVRAM) were evaluated for radiation effects: total dose and single event upset and latch-up under heavy ions and protons. Complementary irradiation with a laser beam provides information on sensitive areas of the devices.

  14. Evaluation of selected sewage sludge gasification technological parameters

    Science.gov (United States)

    Gałko, Grzegorz; Król, Danuta

    2018-02-01

    Evaluation of selected sewage sludge gasification technological parameters was shown in this paper. Degree of carbon conducted in combustible substance and syngas efficiency (technological readiness coefficient) in accordance with equations were calculated. Enthalpy of individual compounds formation and energy balance were calculated in accordance with rule of Hess.

  15. Light detection and ranging (LiDAR) technology evaluation.

    Science.gov (United States)

    2010-10-01

    Evaluation project was undertaken to provide an analysis on the current state of Laser based technology and its applicability, : potential accuracies and information content with respect to Missouri Department of Transportation( MODOT) applications.

  16. Review and evaluation of alternative chemical disposal technologies

    National Research Council Canada - National Science Library

    National Research Council Staff; Commission on Engineering and Technical Systems; Division on Engineering and Physical Sciences; National Research Council; National Academy of Sciences

    .... In light of the fact that alternative technologies have evolved since the 1994 study, this new volume evaluates five Army-chosen alternatives to the baseline incineration system for the disposal...

  17. Healthy China 2020 : Policy and Technology Evaluation | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Healthy China 2020 : Policy and Technology Evaluation ... aimed at providing a blueprint for universal basic healthcare coverage for all by 2020. ... Implementing clinical pathway management and reforming compensation mechanism in rural ...

  18. FHWA research and technology evaluation program summary report spring 2016

    Science.gov (United States)

    2016-08-01

    This report summarizes the 16 evaluations being conducted by the Volpe National Transportation Systems Center on behalf of FHWAs Research and Technology Program. The FHWA R&T Program furthers the Turner-Fairbank Highway Research Centers goal of...

  19. Comparative evaluation of CVD diamond technologies

    Energy Technology Data Exchange (ETDEWEB)

    Anthony, T.R. [General Electric Corporate Research & Development Center, Schenectady, NY (United States)

    1993-01-01

    Chemical vapor deposition (CVD) of diamonds occurs from hydrogen-hydrocarbon gas mixtures in the presence of atomic hydrogen at subatmospheric pressures. Most CVD methods are based on different means of generating and transporting atomic hydrogen in a particular system. Evaluation of these different techniques involves their capital costs, material costs, energy costs, labor costs and the type and quality of diamond that they produce. Currently, there is no universal agreement on which is the best technique and technique selection has been largely driven by the professional background of the user as well as the particular application of interest. This article discusses the criteria for evaluating a process for low-pressure deposition of diamond. Next, a brief history of low-pressure diamond synthesis is reviewed. Several specific processes are addressed, including the hot filament process, hot filament electron-assisted chemical vapor deposition, and plasma generation of atomic hydrogen by glow discharge, microwave discharge, low pressure radio frequency discharge, high pressure DC discharge, high pressure microwave discharge jets, high pressure RF discharge, and high and low pressure flames. Other types of diamond deposition methods are also evaluated. 101 refs., 15 figs.

  20. Evaluation of Technologies for Retrieval of Waste from Leaking Tanks

    International Nuclear Information System (INIS)

    Bamberger, Judith A.; Hatchell, Brian K.; Lewis, Benjamin E.; Randolph, John D.; Killough, Stephen M.

    2000-01-01

    The US Department of Energy Environmental and Waste Management Tanks Focus Area selected as a strategic initiative the need to identify and develop technologies for remediation of tanks that are known or are suspected to leak. This investigation identified and evaluated technical options for single-shell tank waste retrieval applicable to retrieve waste from potentially leaking tanks. Technologies that minimize leakage use minimal water, and dry retrieval technologies were evaluated. Safety, cost, authorization basis, and schedule risks were identified for each technology to provide River Protection Program with information to evaluate technical and programmatic risk. A workshop was held to identify technology needs and solutions. These approaches grouped into five categories: those related to waste dislodging, waste conveyance, both waste dislodging and conveyance, the deployment platform, and technologies related to leak detection, monitoring, and mitigation. Based on the ranking, six technologies were selected as potential candidates for further evaluation. These items were prioritized into four technologies to recommend for further evaluation (1) Air assisted TORE(R). The TORE(R) produces a processing vortex core with the ability to convey solids at pre-determined slurry concentrations over great distances. The dry TORE(R) concept uses air to develop the vortex to fluidize dry solids. The TORE(R)the solids in a slurry transport line. (2) Sonication for waste dislodging utilizes ultrasonic energy to fracture and dislodge hard waste types such as salt cake and sludge. (3) Novel long-reach manipulators concept is to investigate novel cost effective approaches for long-reach manipulator technology. (4) Next generation crawler technology envisions a non-umbilical dislodger, possibly radio controlled and powered remotely to provide a deployment platform not affected by path, or the need to retrace steps

  1. Evaluation of air cleaning technologies existing in the Danish market

    DEFF Research Database (Denmark)

    Ardkapan, Siamak Rahimi; Afshari, Alireza; Bergsøe, Niels Christian

    2014-01-01

    Five portable air cleaning technologies including one new technology were evaluated to find their effectiveness in removing ultrafine particles. Measurements were carried out both in a duct and in a test room. The results showed that the technologies that use/create ozone to clean air can increase...... the ozone level significantly in the room. Moreover, they can cause generation of ultrafine particles and consequently increase ultrafine particle concentration in the room. The study suggests using a mechanical filter with low pressure drop as a recommended air cleaning technology in order to remove...

  2. Indicadores de la calidad de los suelos: una nueva manera de evaluar este recurso Soil quality indicators: A new way to evaluate this resource

    Directory of Open Access Journals (Sweden)

    Y García

    2012-06-01

    Full Text Available El suelo es un recurso indispensable para la vida que permite el desarrollo de las plantas, los animales y el hombre. Sin embargo, aún no se reconocen todas las funciones que realiza, por lo que el concepto general de suelo fértil se refiere más bien a sus propiedades químicas, específicamente a la disponibilidad de los macroelementos primarios (nitrógeno, fósforo y potasio. En los últimos años se han propuesto nuevas definiciones que integran las propiedades físicas, químicas y biológicas de los suelos, así como su capacidad de ser sostenibles, producir alimentos sanos y mitigar la polución medioambiental. No obstante, aún no existen criterios universales para evaluar los cambios en la calidad del suelo, y para ello se utilizan indicadores que son atributos edáficos sensibles al manejo y a las condiciones edafoclimáticas, entre otras características, que permiten valorar su estado. En este artículo se pretende, de forma general, contribuir al conocimiento de la nueva concepción de la calidad del suelo, a partir de sus funciones; definir los indicadores biológicos, físicos y químicos y la relación entre ellos; así como describir algunos estudios que se han realizado en Cuba sobre el tema de los indicadores de la calidad, como una herramienta para la toma de decisiones en el manejo.Soil is an essential resource for life, which allows the development of plants, animals and men. However, all the functions it performs are not acknowledged yet, for which the general concept of fertile soil rather refers to its chemical properties, specifically to the availability of primary macroelements (nitrogen, phosphorus and potassium. In recent years new definitions have been proposed integrating the physical, chemical and biological properties of soils, as well as their capacity of being sustainable, producing healthy food and mitigating environmental pollution. However, there are no universal criteria yet to evaluate the changes in

  3. Transferability of economic evaluations of medical technologies: a new technology for orthopedic surgery.

    Science.gov (United States)

    Steuten, Lotte; Vallejo-Torres, Laura; Young, Terry; Buxton, Martin

    2008-05-01

    Transferring results of economic evaluations across countries or jurisdictions can potentially save scarce evaluation resources while helping to make market access and reimbursement decisions in a timely fashion. This article points out why transferring results of economic evaluations is particularly important in the field of medical technologies. It then provides an overview of factors that are previously identified in the literature as affecting transferability of economic evaluations, as well as methods for transferring results in a scientifically sound way. As the current literature almost exclusively relates to transferability of pharmacoeconomic evaluations, this article highlights those factors and methodologies that are of particular relevance to transferring medical technology assessments. Considering the state-of-the-art literature and a worked, real life, example of transferring an economic evaluation of a product used in orthopedic surgery, we provide recommendations for future work in this important area of medical technology assessment.

  4. A Survey on Economic-driven Evaluations of Information Technology

    NARCIS (Netherlands)

    Mutschler, B.B.; Zarvic, N.; Reichert, M.U.

    2007-01-01

    The economic-driven evaluation of information technology (IT) has become an important instrument in the management of IT projects. Numerous approaches have been developed to quantify the costs of an IT investment and its assumed profit, to evaluate its impact on business process performance, and to

  5. Comparative evaluation of nitrate removal technologies

    International Nuclear Information System (INIS)

    Darbi, A.; Viraraghavan, T.; Butler, R.; Corkal, D.

    2002-01-01

    Due to the extensive application of artificial nitrogen-based fertilizers and animal manure on land, many water agencies face problems of increasing concentrations of nitrate in groundwater. The contamination of groundwater by nitrate may pose a significant public health problem. The threat of methemoglobinemia is well documented and reflected in the U.S. drinking water standard of 10 mg/L as nitrate-nitrogen. Approximately 45% of Saskatchewan's population use groundwater for drinking purposes, out of which, approximately 23% (230,000) are rural residents. The water used is made available from over 48,000 privately owned wells in regions where there is an extensive application of chemical fertilizers. Biological denitrification, ion exchange and reveres osmosis (RO) processes were selected for further study. Field studies were conducted on these processes. The sulfur/limestone autotrophic denitrification (SLAD) process was selected to achieve biological removal of nitrate from groundwater. The feasibility of the system was evaluated under anaerobic conditions. An ion exchange study was conducted using Ionac A554 which is strong anion exchange resins. In the case of groundwater containing low sulfate concentrations, A554 offered high nitrate removal. However, the disposal of regenerant brine can be a problem. A reverse osmosis unit with Filmtec membrane elements (FT30-Element Family) was used in the study on nitrate removal. The unit effluent average nitrate concentration was less than the maximum allowable concentration. (author)

  6. Irradiated fuel performance evaluation technology development

    International Nuclear Information System (INIS)

    Koo, Yang Hyun; Bang, J. G.; Kim, D. H.

    2012-01-01

    Alpha version performance code for dual-cooled annular fuel under steady state operation, so called 'DUOS', has been developed applying performance models and proposed methodology. Furthermore, nonlinear finite element module which could be integrated into transient/accident fuel performance code was also developed and evaluated using commercial FE code. The first/second irradiation and PIE test of annular pellet for dual-cooled annular fuel in the world have been completed. In-pile irradiation test DB of annular pellet up to burnup of 10,000 MWd/MTU through the 1st test was established and cracking behavior of annular pellet and swelling rate at low temperature were studied. To do irradiation test of dual-cooled annular fuel under PWR's simulating steady-state conditions, irradiation test rig/rod design/manufacture of mock-up/performance test have been completed through international collaboration program with Halden reactor project. The irradiation test of large grain pellets has been continued from 2002 to 2011 and completed successfully. Burnup of 70,000 MWd/MTU which is the highest burnup among irradiation test pellets in domestic was achieved

  7. What is Educational Technology? An Inquiry into the Meaning, Use, and Reciprocity of Technology / Qu’est-ce que la technologie pédagogique ? Un examen de la signification, de l’utilisation et de la réciprocité de la technologie

    Directory of Open Access Journals (Sweden)

    Arun Lakhana

    2014-08-01

    Full Text Available This position paper explores the ambiguity of technology, toward refined understanding of Educational Technology. The purpose of education is described by John Dewey as growing, or habitual learning. Two philosophical conceptions of technology are reviewed. Dewey positions inquiry as a technology that creates knowledge. Val Dusek offers a “consensus definition,” a systems approach to technology that merges into social construction theory and actor-network theory, both of which emphasize complex relations between humans and technology. Using Dewey and Dusek as reference, literature related to Educational Technology is reviewed. A history of its definitions and conceptions of hard (material technology and of soft (process technology are examined. Three brief case studies reveal a bias toward hard technology in contemporary discourse. A misconception that soft technology begins with pre-authenticated knowledge is identified and shown to obscure the reciprocity between technology and the intellect. Cet exposé de position se penche sur l’ambiguïté de la technologie en vue de raffiner la compréhension de la technologie pédagogique. L’objectif de l’éducation est décrit par John Dewey comme étant un apprentissage croissant ou habituel. Deux conceptions philosophiques de la technologie sont examinées. Dewey considère l’enquête comme une technologie qui crée le savoir. Val Dusek offre une « définition consensuelle », une approche systémique de la technologie qui rejoint la théorie de la construction sociale et la théorie de l’acteur-réseau, qui mettent toutes deux l’accent sur les relations complexes entre les humains et la technologie. Utilisant Dewey et Dusek comme référence, la documentation portant sur la technologie pédagogique est examinée. L’historique des définitions et conceptions de la technologie « dure » (matérielle et de la technologie « douce » (processus est examiné. Trois courtes études de

  8. Public participation in the evaluation of innovative environmental cleanup technology

    International Nuclear Information System (INIS)

    Peterson, T.; McCabe, G.; Serie, P.; Niesen, K.

    1994-08-01

    Technologies for remediation of contamination are urgently needed to clean up US Department of Energy (DOE) sites across the country. DOE is managing a national program to develop, demonstrate, and deploy new technologies with promise to expedite this cleanup. The Integrated Demonstration for Cleanup of Volatile Organic Compounds at Arid Sites (VOC-Arid ID) is one such effort. Time and resources, however, are too limited to be invested in methods of remediation that will never be deployed because they have not been rigorously evaluated or because they face the withering opposition of stakeholders. Therefore the VOC-Arid ID is assessing technology both in terms of its technical effectiveness and its stakeholder acceptability. Only if a technology performs as required and is acceptable to regulators, users of technology, and the public will the VOC-Arid ID recommend its use. What distinguishes public involvement in the VOC-Arid ID is the direct influence stakeholders have on the design of technology demonstrations by working directly with technology developers. Stakeholders participated in defining the criteria with which innovative environmental cleanup technology is being evaluated. The integrated demonstration is committed to providing stakeholders with the information they've indicated they need to reach reasoned judgments about the use of specific cleanup technologies. A guiding principle of the VOC-Arid ID is that stakeholder participation improves the technologies being developed, enhances the acceptance of the technologies, and will lead to the broad and timely deployment of appropriate and effective methods of environmental remediation. The VOC-Arid ID has involved stakeholders from the host demonstration site, Hanford, Washington, and from other and sites where the ID technologies may be deployed

  9. [Decision modeling for economic evaluation of health technologies].

    Science.gov (United States)

    de Soárez, Patrícia Coelho; Soares, Marta Oliveira; Novaes, Hillegonda Maria Dutilh

    2014-10-01

    Most economic evaluations that participate in decision-making processes for incorporation and financing of technologies of health systems use decision models to assess the costs and benefits of the compared strategies. Despite the large number of economic evaluations conducted in Brazil, there is a pressing need to conduct an in-depth methodological study of the types of decision models and their applicability in our setting. The objective of this literature review is to contribute to the knowledge and use of decision models in the national context of economic evaluations of health technologies. This article presents general definitions about models and concerns with their use; it describes the main models: decision trees, Markov chains, micro-simulation, simulation of discrete and dynamic events; it discusses the elements involved in the choice of model; and exemplifies the models addressed in national economic evaluation studies of diagnostic and therapeutic preventive technologies and health programs.

  10. Evaluation methodologies for security testing biometric systems beyond technological evaluation

    OpenAIRE

    Fernández Saavedra, María Belén

    2013-01-01

    The main objective of this PhD Thesis is the specification of formal evaluation methodologies for testing the security level achieved by biometric systems when these are working under specific contour conditions. This analysis is conducted through the calculation of the basic technical biometric system performance and its possible variations. To that end, the next two relevant contributions have been developed. The first contribution is the definition of two independent biometric performance ...

  11. Technology evaluation: cystic fibrosis therapy, Genzyme.

    Science.gov (United States)

    Cockett, M I

    1999-04-01

    Genzyme is developing therapies to replace the defective forms of the cystic fibrosis (CF) transmembrane conductance regulator (CFTR) protein in CF patients. The company is developing a gene therapy, as well as a recombinant production of CFTR for protein replacement therapy. Both approaches have been granted orphan drug status by the FDA [156348]. The results of several clinical trials were discussed at the first annual meeting of the American Society of Gene Therapy in May 1998. A single dose nasal administration was well tolerated by volunteers, but had disappointing efficacy. In a study completed at the Royal Brompton Hospital, London, a single dose aerosol application of GL-67:DOPE was administered to eight patients, while another eight received GL-67:DOPE plus pCF1-CFTR. In the second group, a moderate increase in the potential difference in the lung was observed, with a slight trend towards bacterial adherence normalization in the airway cells. Seven of the patients in the second group, and three patients who received lipid alone, developed, flu-like symptoms within 24 h. A trial at the University of Alabama, using the same formulation, showed that flu-like symptoms developed in six of eight patients by day two, and in all patients by day seven [290120]. In 1995, the company began a clinical safety trial involving delivery of a normal CF gene to the patient's lungs via an adenovirus vector. The administration involves the inhalation of an aerosol containing the vector or, separately, delivery to one lobe of the patient's lung via a bronchoscope [191678]. To evaluate additional delivery methods for the gene, Genzyme has an exclusive research agreement for the use of Vical's cytofectins as non-viral delivery vectors for CFTR. Also under investigation are delivery systems for the nasal epithelium using liposomes or lipid-DNA complexes. These protocols are being developed in collaboration with the National Heart & Lung Institute, London, and an undisclosed

  12. PAVE: Program for assembling and viewing ESTs

    Directory of Open Access Journals (Sweden)

    Bomhoff Matthew

    2009-08-01

    Full Text Available Abstract Background New sequencing technologies are rapidly emerging. Many laboratories are simultaneously working with the traditional Sanger ESTs and experimenting with ESTs generated by the 454 Life Science sequencers. Though Sanger ESTs have been used to generate contigs for many years, no program takes full advantage of the 5' and 3' mate-pair information, hence, many tentative transcripts are assembled into two separate contigs. The new 454 technology has the benefit of high-throughput expression profiling, but introduces time and space problems for assembling large contigs. Results The PAVE (Program for Assembling and Viewing ESTs assembler takes advantage of the 5' and 3' mate-pair information by requiring that the mate-pairs be assembled into the same contig and joined by n's if the two sub-contigs do not overlap. It handles the depth of 454 data sets by "burying" similar ESTs during assembly, which retains the expression level information while circumventing time and space problems. PAVE uses MegaBLAST for the clustering step and CAP3 for assembly, however it assembles incrementally to enforce the mate-pair constraint, bury ESTs, and reduce incorrect joins and splits. The PAVE data management system uses a MySQL database to store multiple libraries of ESTs along with their metadata; the management system allows multiple assemblies with variations on libraries and parameters. Analysis routines provide standard annotation for the contigs including a measure of differentially expressed genes across the libraries. A Java viewer program is provided for display and analysis of the results. Our results clearly show the benefit of using the PAVE assembler to explicitly use mate-pair information and bury ESTs for large contigs. Conclusion The PAVE assembler provides a software package for assembling Sanger and/or 454 ESTs. The assembly software, data management software, Java viewer and user's guide are freely available.

  13. PAVE: program for assembling and viewing ESTs.

    Science.gov (United States)

    Soderlund, Carol; Johnson, Eric; Bomhoff, Matthew; Descour, Anne

    2009-08-26

    New sequencing technologies are rapidly emerging. Many laboratories are simultaneously working with the traditional Sanger ESTs and experimenting with ESTs generated by the 454 Life Science sequencers. Though Sanger ESTs have been used to generate contigs for many years, no program takes full advantage of the 5' and 3' mate-pair information, hence, many tentative transcripts are assembled into two separate contigs. The new 454 technology has the benefit of high-throughput expression profiling, but introduces time and space problems for assembling large contigs. The PAVE (Program for Assembling and Viewing ESTs) assembler takes advantage of the 5' and 3' mate-pair information by requiring that the mate-pairs be assembled into the same contig and joined by n's if the two sub-contigs do not overlap. It handles the depth of 454 data sets by "burying" similar ESTs during assembly, which retains the expression level information while circumventing time and space problems. PAVE uses MegaBLAST for the clustering step and CAP3 for assembly, however it assembles incrementally to enforce the mate-pair constraint, bury ESTs, and reduce incorrect joins and splits. The PAVE data management system uses a MySQL database to store multiple libraries of ESTs along with their metadata; the management system allows multiple assemblies with variations on libraries and parameters. Analysis routines provide standard annotation for the contigs including a measure of differentially expressed genes across the libraries. A Java viewer program is provided for display and analysis of the results. Our results clearly show the benefit of using the PAVE assembler to explicitly use mate-pair information and bury ESTs for large contigs. The PAVE assembler provides a software package for assembling Sanger and/or 454 ESTs. The assembly software, data management software, Java viewer and user's guide are freely available.

  14. Methane mitigation timelines to inform energy technology evaluation

    Science.gov (United States)

    Roy, Mandira; Edwards, Morgan R.; Trancik, Jessika E.

    2015-11-01

    Energy technologies emitting differing proportions of methane (CH4) and carbon dioxide (CO2) vary significantly in their relative climate impacts over time, due to the distinct atmospheric lifetimes and radiative efficiencies of the two gases. Standard technology comparisons using the global warming potential (GWP) with a fixed time horizon do not account for the timing of emissions in relation to climate policy goals. Here we develop a portfolio optimization model that incorporates changes in technology impacts based on the temporal proximity of emissions to a radiative forcing (RF) stabilization target. An optimal portfolio, maximizing allowed energy consumption while meeting the RF target, is obtained by year-wise minimization of the marginal RF impact in an intended stabilization year. The optimal portfolio calls for using certain higher-CH4-emitting technologies prior to an optimal switching year, followed by CH4-light technologies as the stabilization year approaches. We apply the model to evaluate transportation technology pairs and find that accounting for dynamic emissions impacts, in place of using the static GWP, can result in CH4 mitigation timelines and technology transitions that allow for significantly greater energy consumption while meeting a climate policy target. The results can inform the forward-looking evaluation of energy technologies by engineers, private investors, and policy makers.

  15. Methane mitigation timelines to inform energy technology evaluation

    International Nuclear Information System (INIS)

    Roy, Mandira; Edwards, Morgan R; Trancik, Jessika E

    2015-01-01

    Energy technologies emitting differing proportions of methane (CH 4 ) and carbon dioxide (CO 2 ) vary significantly in their relative climate impacts over time, due to the distinct atmospheric lifetimes and radiative efficiencies of the two gases. Standard technology comparisons using the global warming potential (GWP) with a fixed time horizon do not account for the timing of emissions in relation to climate policy goals. Here we develop a portfolio optimization model that incorporates changes in technology impacts based on the temporal proximity of emissions to a radiative forcing (RF) stabilization target. An optimal portfolio, maximizing allowed energy consumption while meeting the RF target, is obtained by year-wise minimization of the marginal RF impact in an intended stabilization year. The optimal portfolio calls for using certain higher-CH 4 -emitting technologies prior to an optimal switching year, followed by CH 4 -light technologies as the stabilization year approaches. We apply the model to evaluate transportation technology pairs and find that accounting for dynamic emissions impacts, in place of using the static GWP, can result in CH 4 mitigation timelines and technology transitions that allow for significantly greater energy consumption while meeting a climate policy target. The results can inform the forward-looking evaluation of energy technologies by engineers, private investors, and policy makers. (letter)

  16. Avaliação estética de pacientes submetidos a tratamento ortodôntico = Aesthetic evaluation of patients submitted to orthodontic treatment

    Directory of Open Access Journals (Sweden)

    Hérica Vanessa Colonhese Delalíbera

    2010-01-01

    Full Text Available Este trabalho avaliou os resultados estéticos de pacientes Classe II submetidos à terapia ortodôntica corretiva. Selecionaram-se, aleatoriamente, sete pacientes do gênero feminino, leucodermas, submetidas a tratamento ortodôntico corretivo com extração de pelo menos dois pré-molares e com início do tratamento aos 16 até 26 anos. Cada paciente foi entrevistada e as falas foram gravadas e posteriormente transcritas e analisadas. Modelos de estudo, teleradiografias e fotografias constantes nos prontuários foram consultados para se avaliar cinco parâmetros quantitativos: contorno facial, ângulo nasolabial, proporção áurea inter-incisivos, linha média facial e dentária e silhueta incisal no sorriso. Os resultados obtidos revelaram que o tratamento ortodôntico corretivo melhorou a estética facial, alterando medidas do tecido mole da face, o sorriso e as relações pessoais. Concluiu-se que as pesquisas qualitativas e quantitativas são complementares, pois uma análise de resultados, baseada somente em um parâmetro, pode mascarar o resultado real e revelar aspectos parciais. A análise qualitativa indica que ângulos e proporções faciais diferentes do que é proposto cientificamente como estético não interferem com os resultados do tratamento, contanto que a percepção facial dos sujeitos envolvidos vá ao encontro dos padrões de normalidade aceitos por estes e estabelecidos pela sociedade.The aim of this study was to investigate the aesthetic results of orthodontic treatment in Class II individuals. Seven Caucasian females were randomly selected, subjected to corrective orthodontic treatment with extraction of at least two pre-molars and initiation of treatment between 16 and 26 years of age. All patients were interviewed; their speeches were recorded and then transcribed and analyzed. Plaster models, lateral radiographs and photographs contained in records were consulted to assess five quantitative parameters: facial

  17. EST-PAC a web package for EST annotation and protein sequence prediction

    Directory of Open Access Journals (Sweden)

    Strahm Yvan

    2006-10-01

    Full Text Available Abstract With the decreasing cost of DNA sequencing technology and the vast diversity of biological resources, researchers increasingly face the basic challenge of annotating a larger number of expressed sequences tags (EST from a variety of species. This typically consists of a series of repetitive tasks, which should be automated and easy to use. The results of these annotation tasks need to be stored and organized in a consistent way. All these operations should be self-installing, platform independent, easy to customize and amenable to using distributed bioinformatics resources available on the Internet. In order to address these issues, we present EST-PAC a web oriented multi-platform software package for expressed sequences tag (EST annotation. EST-PAC provides a solution for the administration of EST and protein sequence annotations accessible through a web interface. Three aspects of EST annotation are automated: 1 searching local or remote biological databases for sequence similarities using Blast services, 2 predicting protein coding sequence from EST data and, 3 annotating predicted protein sequences with functional domain predictions. In practice, EST-PAC integrates the BLASTALL suite, EST-Scan2 and HMMER in a relational database system accessible through a simple web interface. EST-PAC also takes advantage of the relational database to allow consistent storage, powerful queries of results and, management of the annotation process. The system allows users to customize annotation strategies and provides an open-source data-management environment for research and education in bioinformatics.

  18. Improving early cycle economic evaluation of diagnostic technologies.

    Science.gov (United States)

    Steuten, Lotte M G; Ramsey, Scott D

    2014-08-01

    The rapidly increasing range and expense of new diagnostics, compels consideration of a different, more proactive approach to health economic evaluation of diagnostic technologies. Early cycle economic evaluation is a decision analytic approach to evaluate technologies in development so as to increase the return on investment as well as patient and societal impact. This paper describes examples of 'early cycle economic evaluations' as applied to diagnostic technologies and highlights challenges in its real-time application. It shows that especially in the field of diagnostics, with rapid technological developments and a changing regulatory climate, early cycle economic evaluation can have a guiding role to improve the efficiency of the diagnostics innovation process. In the next five years the attention will move beyond the methodological and analytic challenges of early cycle economic evaluation towards the challenge of effectively applying it to improve diagnostic research and development and patient value. Future work in this area should therefore be 'strong on principles and soft on metrics', that is, the metrics that resonate most clearly with the various decision makers in this field.

  19. Simulation studies for the evaluation of health information technologies

    DEFF Research Database (Denmark)

    Ammenwerth, Elske; Hackl, Werner; Binzer, Kristine

    2012-01-01

    It is essential for new health information technologies (IT) to undergo rigorous evaluations to ensure they are effective and safe for use in real-world situations. However, evaluation of new health IT is challenging, as field studies are often not feasible when the technology being evaluated...... is not sufficiently mature. Laboratory-based evaluations have also been shown to have insufficient external validity. Simulation studies seem to be a way to bridge this gap. The aim of this study was to evaluate, using a simulation methodology, the impact of a new prototype of an electronic medication management...... system on the appropriateness of prescriptions and drugrelated activities, including laboratory test ordering or medication changes. This article presents the results of a controlled simulation study with 50 simulation runs, including ten doctors and five simulation patients, and discusses experiences...

  20. [Evaluation of new and emerging health technologies. Proposal for classification].

    Science.gov (United States)

    Prados-Torres, J D; Vidal-España, F; Barnestein-Fonseca, P; Gallo-García, C; Irastorza-Aldasoro, A; Leiva-Fernández, F

    2011-01-01

    Review and develop a proposal for the classification of health technologies (HT) evaluated by the Health Technology Assessment Agencies (HTAA). Peer review of AETS of the previous proposed classification of HT. Analysis of their input and suggestions for amendments. Construction of a new classification. Pilot study with physicians. Andalusian Public Health System. Spanish HTAA. Experts from HTAA. Tutors of family medicine residents. HT Update classification previously made by the research team. Peer review by Spanish HTAA. Qualitative and quantitative analysis of responses. Construction of a new and pilot study based on 12 evaluation reports of the HTAA. We obtained 11 thematic categories that are classified into 6 major head groups: 1, prevention technology; 2, diagnostic technology; 3, therapeutic technologies; 4, diagnostic and therapeutic technologies; 5, organizational technology, and 6, knowledge management and quality of care. In the pilot there was a good concordance in the classification of 8 of the 12 reports reviewed by physicians. Experts agree on 11 thematic categories of HT. A new classification of HT with double entry (Nature and purpose of HT) is proposed. APPLICABILITY: According to experts, the classification of the work of the HTAA may represent a useful tool to transfer and manage knowledge. Moreover, an adequate classification of the HTAA reports would help clinicians and other potential users to locate them and this can facilitate their dissemination. Copyright © 2010 SECA. Published by Elsevier Espana. All rights reserved.

  1. Oak Ridge National Laboratory Technology Logic Diagram. Volume 1, Technology Evaluation: Part B, Remedial Action

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Part A of Vols. 1 and 2 focuses on D&D. Part B of Vols. 1 and 2 focuses on RA of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the ranking os remedial technologies. Volume 2 (Pts. A, B, and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A, B, and C) contains the TLD data sheets. The focus of Vol. 1, Pt. B, is RA, and it has been divided into six chapters. The first chapter is an introduction, which defines problems specific to the ER Program for ORNL. Chapter 2 provides a general overview of the TLD. Chapters 3 through 5 are organized into necessary subelement categories: RA, characterization, and robotics and automation. The final chapter contains regulatory compliance information concerning RA.

  2. 1992 update of US EPA's Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program

    International Nuclear Information System (INIS)

    Lewis, N.M.; Barkley, N.P.; Williams, T.

    1992-01-01

    The Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program (ETP) has financially supported further development of bench- and pilot-scale testing and evaluation of innovative technologies for use at hazardous waste sites for five years. The ETP was established under the Superfund Amendments and Reauthorization Act (SARA) of 1986. The ETP complies with the goal of the SITE Program to promote, accelerate and make commercially available the development of alternative/innovative treatment technologies for use at Superfund sites. Technologies are submitted to the ETP through yearly solicitations for Preproposals. Applicants are asked to submit a detailed project proposal and a cooperative agreement application that requires Developer/EPA cost sharing. EPA co-funds selected Developers for one to two years. Second-year funding requires documentation of significant progress during the first year. Facilities, equipment, data collection, performance and development are monitored throughout the project. The US Department of Energy (DOE) and the US Air Force (USAF) are participants in the ETP. DOE has co-funded ETP projects since 1990 and the USAF since 1991. A goal of the ETP is to move developed technologies to the field-demonstration stage. A developer may be considered for participation in the SITE Demonstration Program if performance in the ETP indicates the technology is field-ready for evaluation. Six technology categories: biological, chemical, materials handling, physical, solidification/stabilization and thermal, are presently in the ETP. Technologies of primary interest to EPA are those that can treat complex mixtures of hazardous organic and inorganic contaminants and provide improved solids handling and/or pretreatment. An account of the background and progress of the ETP's first five years is presented in this paper. Technologies currently in the ETP are noted, and developers and EPA Project Managers, are listed. 4 refs., 11 figs., 6 tabs

  3. Development of life evaluation technology for nuclear power plant components

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin [Sungkyunkwan Univ., Seoul (Korea, Republic of); Kwon, J. D. [Yeungnam Univ., Gyeongsan (Korea, Republic of); Kang, K. J. [Chonnam National Univ., Gwangju (Korea, Republic of)] (and others)

    2001-03-15

    This research focuses on development of reliable life evaluation technology for nuclear power plant (NPP) components, and is divided into two parts, development of life evaluation systems for pressurized components and evaluation of applicability of emerging technology to operating plants. For the development of life evaluation system for nuclear pressure vessels, the following seven topics are covered: development of expert systems for integrity assessment of pressurized components, development of integrity evaluation systems of steam generator tubes, prediction of failure probability for NPP components based on probabilistic fracture mechanics, development of fatigue damage evaluation technique for plant life extension, domestic round robin analysis for pressurized thermal shock of reactor vessels, domestic round robin analysis of constructing P--T limit curves for reactor vessels, and development of data base for integrity assessment. For evaluation of applicability of emerging technology to operating plants, on the other hand, the following eight topics are covered: applicability of the Leak-Before-Break analysis to Cast S/S piping, collection of aged material tensile and toughness data for aged Cast S/S piping, finite element analyses for load carrying capacity of corroded pipes, development of Risk-based ISI methodology for nuclear piping, collection of toughness data for integrity assessment of bi-metallic joints, applicability of the Master curve concept to reactor vessel integrity assessment, measurement of dynamic fracture toughness, and provision of information related to regulation and plant life extension issues.

  4. Technology Evaluation Workshop Report for Tank Waste Chemical Characterization

    International Nuclear Information System (INIS)

    Eberlein, S.J.

    1994-04-01

    A Tank Waste Chemical Characterization Technology Evaluation Workshop was held August 24--26, 1993. The workshop was intended to identify and evaluate technologies appropriate for the in situ and hot cell characterization of the chemical composition of Hanford waste tank materials. The participants were asked to identify technologies that show applicability to the needs and good prospects for deployment in the hot cell or tanks. They were also asked to identify the tasks required to pursue the development of specific technologies to deployment readiness. This report describes the findings of the workshop. Three focus areas were identified for detailed discussion: (1) elemental analysis, (2) molecular analysis, and (3) gas analysis. The technologies were restricted to those which do not require sample preparation. Attachment 1 contains the final workshop agenda and a complete list of attendees. An information package (Attachment 2) was provided to all participants in advance to provide information about the Hanford tank environment, needs, current characterization practices, potential deployment approaches, and the evaluation procedure. The participants also received a summary of potential technologies (Attachment 3). The workshop opened with a plenary session, describing the background and issues in more detail. Copies of these presentations are contained in Attachments 4, 5 and 6. This session was followed by breakout sessions in each of the three focus areas. The workshop closed with a plenary session where each focus group presented its findings. This report summarizes the findings of each of the focus groups. The evaluation criteria and information about specific technologies are tabulated at the end of each section in the report. The detailed notes from each focus group are contained in Attachments 7, 8 and 9

  5. TECHNOLOGY EVALUATION REPORT: SILICATE TECHNOLOGY CORPORATION - SOLIDIFICATION/STABILIZATION OF PCP AND INORGANIC CONTAMINANTS IN SOILS - SELMA, CA

    Science.gov (United States)

    This Technolgy Evaluation Report evaluates the solidification/stabilization process of Silicate Technology Corporation (STC) for the on-site treatment of contaminated soil The STC immobilization technology uses a proprietary product (FMS Silicate) to chemically stabilize and ...

  6. Development of life evaluation technology for nuclear power plant components

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Kim, Yun Jae; Choi, Jae Boong [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

    2002-03-15

    This project focuses on developing reliable life evaluation technology for nuclear power plant components, and is divided into two parts, development of a life evaluation system for nuclear pressure vessels and evaluation of applicability of emerging technology to operating plants. For the development of life evaluation system for nuclear pressure vessels, the following seven topics are covered in this project: defect assessment method for steam generator tubes, development of fatigue monitoring system, assessment of corroded pipes, domestic round robin analysis for constructing P-T limit curve for RPV, development of probabilistic integrity assessment technique, effect of aging on strength of dissimilar welds, applicability of LBB to cast stainless steel, and development of probabilistic piping fracture mechanics.

  7. EST2Prot: Mapping EST sequences to proteins

    Directory of Open Access Journals (Sweden)

    Lin David M

    2006-03-01

    Full Text Available Abstract Background EST libraries are used in various biological studies, from microarray experiments to proteomic and genetic screens. These libraries usually contain many uncharacterized ESTs that are typically ignored since they cannot be mapped to known genes. Consequently, new discoveries are possibly overlooked. Results We describe a system (EST2Prot that uses multiple elements to map EST sequences to their corresponding protein products. EST2Prot uses UniGene clusters, substring analysis, information about protein coding regions in existing DNA sequences and protein database searches to detect protein products related to a query EST sequence. Gene Ontology terms, Swiss-Prot keywords, and protein similarity data are used to map the ESTs to functional descriptors. Conclusion EST2Prot extends and significantly enriches the popular UniGene mapping by utilizing multiple relations between known biological entities. It produces a mapping between ESTs and proteins in real-time through a simple web-interface. The system is part of the Biozon database and is accessible at http://biozon.org/tools/est/.

  8. Energetic and economic evaluations on hydrogen storage technologies

    Energy Technology Data Exchange (ETDEWEB)

    Arca, S.; Di Profio, P.; Germani, R. [Perugia Univ., Perugia (Italy). Centro di Eccellenza Materiali Innovativi Nanostrutturati, Dip. Chimica; Savelli, G.; Cotana, F.; Rossi, F.; Amantini, M. [Universita degli Studi di Perugia, Perugia (Italy). Dipartimento di Ingegneria Industriale, Sezione di Fisica Tecnica

    2008-07-01

    With the development of the hydrogen economy and fuel cell vehicles, a major technological issue has emerged regarding the storage and delivery of large amounts of hydrogen. Several hydrogen storage methodologies are available while other technologies are being developed aside from the classical compression and liquefaction of hydrogen. A novel technology is also in rapid process, which is based on clathrate hydrates of hydrogen. The features and performances of available storage systems were evaluated in an effort to determine the best technology throughout the hydrogen chain. For each of the storage solutions presented, the key parameters were compared. These key parameters included interaction energy between hydrogen and support; real and practical storage capacity; and specific energy consumption. The paper presented the study methods and discussed hydrogen storage technologies using compressed hydrogen; metal hydrides; liquefied hydrogen; carbon nanotubes; ammonia; and gas hydrates. Carbon dioxide emissions were also evaluated for each storage system analyzed. The paper also presented the worst scenario. It was concluded that a technology based on clathrate hydrates of hydrogen, while being far from optimized, was highly competitive with the classical approaches. 21 refs., 9 figs.

  9. Clinical Simulation: A Protocol for Evaluation of Mobile Technology.

    Science.gov (United States)

    Mather, Carey; Jensen, Sanne; Cummings, Elizabeth

    2017-01-01

    For mobile technology to be accepted at point of care in healthcare environments there is a need to demonstrate benefits whilst ameliorating the risks and challenges. To provide a standardised approach to evaluation of mobile technology a simulation protocol was developed to provide guidance for its use in healthcare environments. Simulated conditions provide the opportunity to assess intended and unintended consequences and identify potential workarounds when using technology. The protocol can also be used to demonstrate the importance of the development of digital professionalism by end-users prior to students entering the clinical practice setting. The mobile technology protocol was adapted from a health information systems protocol developed and used at the ITX Lab, Denmark for use in other simulation laboratories. Use case scenarios were developed to enable evaluation of mobile technology for mobile learning of nurses, nurse supervisors, students and patients. The scenarios can be used in a range of simulated environments including hospital bedside, outpatient clinic or community settings. A case study exemplar of a nurse and patient is included to demonstrate how the mobile technology protocol can be applied.

  10. Replacing Smartphones With Mini Tablet Technology: An Evaluation.

    Science.gov (United States)

    Maneval, Rhonda; Mechtel, Marci

    Handheld technology allows students to access point-of-care resources throughout the clinical experience. To assess the viability of replacing student smartphones with tablets, an evaluation project was undertaken. Overall, students were equally dissatisfied with the 2 types of tablets that were evaluated. Students saw the potential usefulness of tablets to manage clinical assignments, interact with the learning management system, and communicate with faculty, but not for retrieving information currently accessible on their phones.

  11. Economic evaluation of information technology applications on dairy farms

    OpenAIRE

    Asseldonk, van, M.A.P.M.

    1999-01-01

    The research described in this thesis focused on the economic evaluation of information technology (IT) applications on dairy farms in order to support investment decisions. The evaluation included a normative (deductive) approach and an empirical (positive) approach. The normative approach predicted potential benefits from a theoretical model of the investment, and investigated how farmers should deal with the applications. The empirical approach observed the actual effects of the i...

  12. Evaluating learning and teaching technologies in further education

    OpenAIRE

    Jones, Ann; Barnard, Jane; Calder, Judith; Scanlon, Eileen; Thompson, Julie

    2000-01-01

    With the current emphasis on quality assessment and the role of evaluation in quality assessment, it is likely that teachers in post-compulsory education will increasingly be expected to evaluate their teaching, especially when making changes to their teaching methods. In Further Education (FE), there have been a number of developments to foster the use of Information and Learning Technologies (ILT), following the publication of the Higginson Report in 1996. However, there is some evidence th...

  13. Evaluation of National School for Professional Technology Education in Mexico

    OpenAIRE

    Lopez-Acevedo, Gladys

    2005-01-01

    The National School for Professional Technology Education (CONALEP) is Mexico's largest and oldest technical education system. CONALEP serves low-income students at the upper-secondary school level in Mexico. The labor market performance of CONALEP graduates has been evaluated four times in the past. These evaluations have yielded encouraging results, showing that CONALEP's graduates find jobs faster and earn higher wages than similar "control" groups. In contrast, using non-experimental meth...

  14. Assistive technology evaluations: Remote-microphone technology for children with Autism Spectrum Disorder.

    Science.gov (United States)

    Schafer, Erin C; Wright, Suzanne; Anderson, Christine; Jones, Jessalyn; Pitts, Katie; Bryant, Danielle; Watson, Melissa; Box, Jerrica; Neve, Melissa; Mathews, Lauren; Reed, Mary Pat

    The goal of this study was to conduct assistive technology evaluations on 12 children diagnosed with Autism Spectrum Disorder (ASD) to evaluate the potential benefits of remote-microphone (RM) technology. A single group, within-subjects design was utilized to explore individual and group data from functional questionnaires and behavioral test measures administered, designed to assess school- and home-based listening abilities, once with and once without RM technology. Because some of the children were unable to complete the behavioral test measures, particular focus was given to the functional questionnaires completed by primary teachers, participants, and parents. Behavioral test measures with and without the RM technology included speech recognition in noise, auditory comprehension, and acceptable noise levels. The individual and group teacher (n=8-9), parent (n=8-9), and participant (n=9) questionnaire ratings revealed substantially less listening difficulty when RM technology was used compared to the no-device ratings. On the behavioral measures, individual data revealed varied findings, which will be discussed in detail in the results section. However, on average, the use of the RM technology resulted in improvements in speech recognition in noise (4.6dB improvement) in eight children, higher auditory working memory and comprehension scores (12-13 point improvement) in seven children, and acceptance of poorer signal-to-noise ratios (8.6dB improvement) in five children. The individual and group data from this study suggest that RM technology may improve auditory function in children with ASD in the classroom, at home, and in social situations. However, variability in the data and the inability of some children to complete the behavioral measures indicates that individualized assistive technology evaluations including functional questionnaires will be necessary to determine if the RM technology will be of benefit to a particular child who has ASD. Copyright

  15. X-231B technology demonstration for in situ treatment of contaminated soil: Technology evaluation and screening

    International Nuclear Information System (INIS)

    Siegrist, R.L.; Morris, M.I.; Donaldson, T.L.; Palumbo, A.V.; Herbes, S.E.; Jenkins, R.A.; Morrissey, C.M.; Harris, M.T.

    1993-08-01

    The Portsmouth Gaseous Diffusion Plant (Ports) is located approximately 70 miles south of Columbus in southern Ohio. Among the several waste management units on the facility, the X-231B unit consists of two adjacent oil biodegradation plots. The plots encompass ∼ 0.8 acres and were reportedly used from 1976 to 1983 for the treatment and disposal of waste oils and degreasing solvents, some containing uranium-235 and technetium-99. The X-231B unit is a regulated solid waste management unit (SWMU) under the Resource Conservation and Recovery Act (RCRA). The X-231B unit is also a designated SWMU located within Quadrant I of the site as defined in an ongoing RCRA Facilities Investigation and Corrective Measures Study (RFI/CMS). Before implementing one or more Technology Demonstration Project must be completed. The principal goal of this project was to elect and successfully demonstrate one ore more technologies for effective treatment of the contaminated soils associated with the X-231B unit at PORTS. The project was divided into two major phases. Phase 1 involved a technology evaluation and screening process. The second phase (i.e., Phase 2) was to involve field demonstration, testing and evaluation of the technology(s) selected during Phase 1. This report presents the methods, results, and conclusions of the technology evaluation and screening portion of the project

  16. The evaluations of facebook as an educational technology tools in ...

    African Journals Online (AJOL)

    Entrepreneurship is integrated into the curriculum structure designed for students studying subjects other than Business. The aim of this study was to evaluate the usage of Facebook as an educational technology tool in entrepreneurship course in TVET institution particularly in Polytechnic Malaysia. The 400 sample was ...

  17. Evaluation of Technological Quality of Meat Produced from Nsukka ...

    African Journals Online (AJOL)

    The technological quality of raw meat from Nsukka local abattoir was evaluated by analyzing the proximate composition, water holding capacity, pH, Napole yield and sensory colour and texture of longissimus dorsi [LD] and psoas major [PM] of beef and pork. Results show that moisture [71.36 – 72.76%], protein [21.37 ...

  18. Techno-economic evaluation of broadband access technologies

    DEFF Research Database (Denmark)

    Sigurdsson, Halldór Matthias; Skouby, Knud Erik

    2005-01-01

    Broadband for all is an essential element in the EU policy concerning the future of ICT-based society. The overall purpose of this paper is to present a model for evaluation of different broadband access technologies and to present some preliminary results based on the model that has been carried...

  19. Strategic Evaluation of University Knowledge and Technology Transfer Effectiveness

    Science.gov (United States)

    Tran, Thien Anh

    2013-01-01

    Academic knowledge and technology transfer has been growing in importance both in academic research and practice. A critical question in managing this activity is how to evaluate its effectiveness. The literature shows an increasing number of studies done to address this question; however, it also reveals important gaps that need more research.…

  20. Using Technology to Improve the Objectivity of Criminal Responsibility Evaluations.

    Science.gov (United States)

    Vitacco, Michael J; Gottfried, Emily D; Batastini, Ashley B

    2018-03-01

    Criminal responsibility (or insanity) evaluations require forensic clinicians to reconstruct a defendant's decision-making abilities, behavioral control, and emotional state at the time of the criminal act. Forensic evaluators are ultimately tasked to evaluate whether an individual had the capacity to understand right from wrong, and in some jurisdictions, determine whether the defendant lacked substantial capacity to conform his behavior to the requirements of the law as a result of a threshold condition (e.g., mental illness). Insanity evaluations are inherently complex, because they require the clinician to determine someone's mental state at some point in the past (weeks, months, or even years). Recent research on insanity evaluations underscores significant problems with the reliability and validity of these evaluations. However, technological advances including social media (e.g., Facebook and Twitter), mandating that law enforcement videotape interrogations, and the use of body and dashboard cameras can aid clinicians in improving the precision and quality of insanity evaluations. This article discusses practical guidelines and ethics-related concerns regarding the use of technology to improve the objectivity of criminal responsibility evaluations. © 2018 American Academy of Psychiatry and the Law.

  1. Dissemination of Technology to Evaluate Healthy Food Incentive Programs.

    Science.gov (United States)

    Freedman, Darcy A; Hunt, Alan R; Merritt, Katie; Shon, En-Jung; Pike, Stephanie N

    2017-03-01

    Federal policy supports increased implementation of monetary incentive interventions for chronic disease prevention among low-income populations. This study describes how a Prevention Research Center, working with a dissemination partner, developed and distributed technology to support nationwide implementation and evaluation of healthy food incentive programming focused on Supplemental Nutrition Assistance Program recipients. FM Tracks, an iOS-based application and website, was developed to standardize evaluation methods for healthy food incentive program implementation at direct-to-consumer markets. This evaluation examined diffusion and adoption of the technology over 9 months (July 2015-March 2016). Data were analyzed in 2016. FM Tracks was disseminated to 273 markets affiliated with 37 regional networks in 18 states and Washington, DC. All markets adopted the sales transaction data collection feature, with nearly all recording at least one Supplemental Nutrition Assistance Program (99.3%) and healthy food incentive (97.1%) transaction. A total of 43,493 sales transactions were recorded. By the ninth month of technology dissemination, markets were entering individual sales transactions using the application (34.5%) and website (29.9%) and aggregated transactions via website (35.6%) at similar rates. Use of optional evaluation features like recording a customer ID with individual transactions increased successively with a low of 22.2% during the first month to a high of 69.2% in the ninth month. Systematic and widely used evaluation technology creates possibilities for pragmatic research embedded within ongoing, real-world implementation of food access interventions. Technology dissemination requires supportive technical assistance and continuous refinement that can be advanced through academic-practitioner partnerships. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  2. Intervention of drudgery reducing technologies in agriculture and impact evaluation.

    Science.gov (United States)

    Mehta, Manju; Gandhi, Sudesh; Dilbaghi, Mamta

    2012-01-01

    Agriculture is main source of livelihood for majority of the population in India. Agriculture has been established as one of the drudgery prone occupation of unorganized sector due to lack of access to improved agricultural technologies. The present study was planned to assess intervention of drudgery reducing technologies in agriculture and its impact evaluation. The drudgery areas/activities in agriculture were identified. Participatory field level skill training for proper use of the ergonomically improved farm technologies were given to men and women in separate groups. An intervention package consisting of improved sickle, wheel hand hoe, capron, cot bag and protective gloves was introduced in village Shahpur. Data were collected to quantify the impact of intervention on the level of drudgery of worker before and after the technology intervention from sample of 30 respondents (15 male and 15 female) selected randomly from village Shahpur. Gain in knowledge and change in awareness level were calculated after the training.Evaluation of field validation of technology on drudgery of men & women was done after its use in the field conditions. A significant gain in awareness was observed among both men(2.6) & women (3.0) whereas the gain in knowledge was more among men (6.6) than women (4.5). In evaluation of field validation of technology on drudgery it was found that all the five technologies reduced the drudgery of men as well as women. However wheel hand hoe was used successfully by men in comparison to women who preferred to use their conventional technology i.e improved long-handled hoe. Evaluation of validation trials of the technologies reported that improved sickle was used successfully by both men & women farmers. More than half of the men farmers (53.3%) & only 13.3 percent women farmers preferred the wheel hand hoe over the traditional one as they found it four times more efficient in terms of time, energy & money saving. Cot bag was preferred by the

  3. Evaluation of innovative arsenic treatment technologies :the arsenic water technology partnership vendors forums summary report.

    Energy Technology Data Exchange (ETDEWEB)

    Everett, Randy L.; Siegel, Malcolm Dean; McConnell, Paul E.; Kirby, Carolyn (Comforce Technical Services, Inc.)

    2006-09-01

    The lowering of the drinking water standard (MCL) for arsenic from 50 {micro}g/L to 10 {micro}g/L in January 2006 could lead to significant increases in the cost of water for many rural systems throughout the United States. The Arsenic Water Technology Partnership (AWTP), a collaborative effort of Sandia National Laboratories, the Awwa Research Foundation (AwwaRF) and WERC: A Consortium for Environmental Education and Technology Development, was formed to address this problem by developing and testing novel treatment technologies that could potentially reduce the costs of arsenic treatment. As a member of the AWTP, Sandia National Laboratories evaluated cutting-edge commercial products in three annual Arsenic Treatment Technology Vendors Forums held during the annual New Mexico Environmental Health Conferences (NMEHC) in 2003, 2004 and 2005. The Forums were comprised of two parts. At the first session, open to all conference attendees, commercial developers of innovative treatment technologies gave 15-minute talks that described project histories demonstrating the effectiveness of their products. During the second part, these same technologies were evaluated and ranked in closed sessions by independent technical experts for possible use in pilot-scale field demonstrations being conducted by Sandia National Laboratories. The results of the evaluations including numerical rankings of the products, links to company websites and copies of presentations made by the representatives of the companies are posted on the project website at http://www.sandia.gov/water/arsenic.htm. This report summarizes the contents of the website by providing brief descriptions of the technologies represented at the Forums and the results of the evaluations.

  4. A case study evaluation of the use of video technology in concrete pavement evaluation.

    Science.gov (United States)

    2000-01-01

    This report presents the results of an evaluation of video technology as a possible solution to the problem of safely collecting objective condition data for prioritizing concrete pavement rehabilitation needs in Virginia. The study involved the eval...

  5. Cyber security evaluation of II&C technologies

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken [Idaho National Laboratory (INL), Idaho Falls, ID (United States)

    2014-11-01

    The Light Water Reactor Sustainability (LWRS) Program is a research and development program sponsored by the Department of Energy, which is conducted in close collaboration with industry to provide the technical foundations for licensing and managing the long-term, safe and economical operation of current nuclear power plants The LWRS Program serves to help the US nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. Within the LWRS Program, the Advanced Instrumentation, Information, and Control (II&C) Systems Technologies Pathway conducts targeted research and development (R&D) to address aging and reliability concerns with the legacy instrumentation and control and related information systems of the U.S. operating light water reactor (LWR) fleet. The II&C Pathway is conducted by Idaho National Laboratory (INL). Cyber security is a common concern among nuclear utilities and other nuclear industry stakeholders regarding the digital technologies that are being developed under this program. This concern extends to the point of calling into question whether these types of technologies could ever be deployed in nuclear plants given the possibility that the information in them can be compromised and the technologies themselves can potentially be exploited to serve as attack vectors for adversaries. To this end, a cyber security evaluation has been conducted of these technologies to determine whether they constitute a threat beyond what the nuclear plants already manage within their regulatory-required cyber security programs. Specifically, the evaluation is based on NEI 08-09, which is the industry’s template for cyber security programs and evaluations, accepted by the Nuclear Regulatory Commission (NRC) as responsive to the requirements of the nuclear power plant cyber security regulation found in 10 CFR 73.54. The evaluation was conducted by a

  6. Environmental Evaluation of Soil Salinity with Various Watering Technologies Assessment.

    Science.gov (United States)

    Seitkaziev, Adeubay; Shilibek, Kenzhegali; Fakhrudenova, Idiya; Salybayev, Satybaldy; Zhaparova, Sayagul; Duisenbayeva, Saule; Bayazitova, Zulfia; Aliya, Maimakova; Seitkazieva, Karlygash; Aubakirov, Hamit

    2018-01-01

      The purpose of this study is to develop mathematical tools for evaluating the level of environmental safety of various watering technologies. A set of indicators, was developed with regard to the natural factors, the nature of the man-induced load, degradation type, and characteristics of the disruption of humification conditions. Thermal and physical characteristics of the soil, the state of its surface, and meteorological factors, including air temperature, relative humidity, precipitation, wind speed, solar radiation, etc. were studied with a view to determining the heat and air exchange in the soil. An environmental evaluation of the methods for saline land development was conducted with regard to the heat and moisture supply. This tool can be used to determine the level of environmental safety of soil salinization during the environmental evaluation of the investigation of soil salinity with various watering technologies.

  7. Oil Bypass Filter Technology Performance Evaluation - January 2003 Quarterly Report

    Energy Technology Data Exchange (ETDEWEB)

    Laurence R. Zirker; James E. Francfort

    2003-01-01

    This report details the initial activities to evaluate the performance of the oil bypass filter technology being tested by the Idaho National Engineering and Environmental Laboratory (INEEL) for the U.S. Department of Energy's FreedomCAR & Vehicle Technologies Program. Eight full-size, four-cycle diesel-engine buses used to transport INEEL employees on various routes have been equipped with oil bypass systems from the puraDYN Corporation. Each bus averages about 60,000 miles a year. The evaluation includes an oil analysis regime to monitor the presence of necessary additives in the oil and to detect undesirable contaminants. Very preliminary economic analysis suggests that the oil bypass system can reduce life-cycle costs. As the evaluation continues and oil avoidance costs are quantified, it is estimated that the bypass system economics may prove increasingly favorable, given the anticipated savings in operational costs and in reduced use of oil and waste oil avoidance.

  8. Oil Bypass Filter Technology Performance Evaluation - First Quarterly Report

    Energy Technology Data Exchange (ETDEWEB)

    Zirker, L.R.; Francfort, J.E.

    2003-01-31

    This report details the initial activities to evaluate the performance of the oil bypass filter technology being tested by the Idaho National Engineering and Environmental Laboratory (INEEL) for the U.S. Department of Energy's FreedomCAR & Vehicle Technologies Program. Eight full-size, four-cycle diesel-engine buses used to transport INEEL employees on various routes have been equipped with oil bypass systems from the puraDYN Corporation. Each bus averages about 60,000 miles a year. The evaluation includes an oil analysis regime to monitor the presence of necessary additives in the oil and to detect undesirable contaminants. Very preliminary economic analysis suggests that the oil bypass system can reduce life-cycle costs. As the evaluation continues and oil avoidance costs are quantified, it is estimated that the bypass system economics may prove increasingly favorable, given the anticipated savings in operational costs and in reduced use of oil and waste oil avoidance.

  9. galaxieEST: addressing EST identity through automated phylogenetic analysis.

    Science.gov (United States)

    Nilsson, R Henrik; Rajashekar, Balaji; Larsson, Karl-Henrik; Ursing, Björn M

    2004-07-05

    Research involving expressed sequence tags (ESTs) is intricately coupled to the existence of large, well-annotated sequence repositories. Comparatively complete and satisfactory annotated public sequence libraries are, however, available only for a limited range of organisms, rendering the absence of sequences and gene structure information a tangible problem for those working with taxa lacking an EST or genome sequencing project. Paralogous genes belonging to the same gene family but distinguished by derived characteristics are particularly prone to misidentification and erroneous annotation; high but incomplete levels of sequence similarity are typically difficult to interpret and have formed the basis of many unsubstantiated assumptions of orthology. In these cases, a phylogenetic study of the query sequence together with the most similar sequences in the database may be of great value to the identification process. In order to facilitate this laborious procedure, a project to employ automated phylogenetic analysis in the identification of ESTs was initiated. galaxieEST is an open source Perl-CGI script package designed to complement traditional similarity-based identification of EST sequences through employment of automated phylogenetic analysis. It uses a series of BLAST runs as a sieve to retrieve nucleotide and protein sequences for inclusion in neighbour joining and parsimony analyses; the output includes the BLAST output, the results of the phylogenetic analyses, and the corresponding multiple alignments. galaxieEST is available as an on-line web service for identification of fungal ESTs and for download / local installation for use with any organism group at http://galaxie.cgb.ki.se/galaxieEST.html. By addressing sequence relatedness in addition to similarity, galaxieEST provides an integrative view on EST origin and identity, which may prove particularly useful in cases where similarity searches return one or more pertinent, but not full, matches and

  10. Evaluation of technological measures to cope with climate change

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, Hiroshi; Moriguchi, Yulchi [National Inst. for Environmental Studies, Onogawa Tsukuba (Japan)

    1993-12-31

    Because the global warming (climate change) is recognized as a highly probable phenomenon in the next century, the countermeasures to cope with this issue is really Important. International discussion Is progressing towards the conclusion of the treaty to stabilize global warming. Therefore, now is the time to take concrete action to reduce the emission to the greenhouse gases (GHG). To find the way to reduce the emission of the GHG, the procedure as next should be taken. (1) Systematic estimation of GHG emission (GHG analysis), (2) Identification of conventional and Innovative technologies, (3) Assessment of individual sectoral technologies, (4) Comprehensive evaluation of countermeasures as a whole. Both in the U.S.A. and Japan, this kind of research have been made independently. Among these processes, the standard methodologies should be established on the GHG analysis, the assessment of individual technologies and the comprehensive evaluation. From such a background, it is important to discuss the way to evaluate technological measures to cope with climate change between the specialist from the U.S.A. and Japan. And still required to search the possibility to establish a joint project between both countries.

  11. Evaluation of Brine Processing Technologies for Spacecraft Wastewater

    Science.gov (United States)

    Shaw, Hali L.; Flynn, Michael; Wisniewski, Richard; Lee, Jeffery; Jones, Harry; Delzeit, Lance; Shull, Sarah; Sargusingh, Miriam; Beeler, David; Howard, Jeanie; hide

    2015-01-01

    Brine drying systems may be used in spaceflight. There are several advantages to using brine processing technologies for long-duration human missions including a reduction in resupply requirements and achieving high water recovery ratios. The objective of this project was to evaluate four technologies for the drying of spacecraft water recycling system brine byproducts. The technologies tested were NASA's Forward Osmosis Brine Drying (FOBD), Paragon's Ionomer Water Processor (IWP), NASA's Brine Evaporation Bag (BEB) System, and UMPQUA's Ultrasonic Brine Dewatering System (UBDS). The purpose of this work was to evaluate the hardware using feed streams composed of brines similar to those generated on board the International Space Station (ISS) and future exploration missions. The brine formulations used for testing were the ISS Alternate Pretreatment and Solution 2 (Alt Pretreat). The brines were generated using the Wiped-film Rotating-disk (WFRD) evaporator, which is a vapor compression distillation system that is used to simulate the function of the ISS Urine Processor Assembly (UPA). Each system was evaluated based on the results from testing and Equivalent System Mass (ESM) calculations. A Quality Function Deployment (QFD) matrix was also developed as a method to compare the different technologies based on customer and engineering requirements.

  12. Practice-centred evaluation and the privileging of care in health information technology evaluation.

    Science.gov (United States)

    Darking, Mary; Anson, Rachel; Bravo, Ferdinand; Davis, Julie; Flowers, Steve; Gillingham, Emma; Goldberg, Lawrence; Helliwell, Paul; Henwood, Flis; Hudson, Claire; Latimer, Simon; Lowes, Paul; Stirling, Ian

    2014-06-05

    Our contribution, drawn from our experience of the case study provided, is a protocol for practice-centred, participative evaluation of technology in the clinical setting that privileges care. In this context 'practice-centred' evaluation acts as a scalable, coordinating framework for evaluation that recognises health information technology supported care as an achievement that is contingent and ongoing. We argue that if complex programmes of technology-enabled service innovation are understood in terms of their contribution to patient care and supported by participative, capability-building evaluation methodologies, conditions are created for practitioners and patients to realise the potential of technologies and make substantive contributions to the evidence base underpinning health innovation programmes. Electronic Patient Records (EPRs) and telemedicine are positioned by policymakers as health information technologies that are integral to achieving improved clinical outcomes and efficiency savings. However, evaluating the extent to which these aims are met poses distinct evaluation challenges, particularly where clinical and cost outcomes form the sole focus of evaluation design. We propose that a practice-centred approach to evaluation - in which those whose day-to-day care practice is altered (or not) by the introduction of new technologies are placed at the centre of evaluation efforts - can complement and in some instances offer advantages over, outcome-centric evaluation models. We carried out a regional programme of innovation in renal services where a participative approach was taken to the introduction of new technologies, including: a regional EPR system and a system to support video clinics. An 'action learning' approach was taken to procurement, pre-implementation planning, implementation, ongoing development and evaluation. Participants included clinicians, technology specialists, patients and external academic researchers. Whilst undergoing these

  13. Report of the Uranium Enrichment Technology Evaluation Committee

    International Nuclear Information System (INIS)

    1977-01-01

    The centrifuge method of uranium enrichment is being pushed forward in Japan as a national project. The results of the technology evaluation are described regarding the efforts heretofore, the plan for pilot plant construction, internationally competitive ability, and the schedule after the pilot plant. In conclusion, the basic technology for proceeding to a pilot plant is now mature, and the pilot plant planning by PNC (Power Reactor and Nuclear Fuel Development Corporation) is generally appropriate. The outlook for constructing and internationally competitive practical plant is reasonably good. (Mori, K.)

  14. EPA [Environmental Protection Agency] SITE [Superfund Innovative Technology Evaluation] program seeks technology proposals

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    EPA will issue an RFP to initiate the SITE-005 solicitation for demonstration of technologies under the Superfund Innovative Technology Evaluation (SITE) Program. This portion of the SITE program offers a mechanism for conducting a joint technology demonstration between EPA and the private sector. The goal of the demonstration program is to provide an opportunity for developers to demonstrate the performance of their technologies on actual hazardous wastes at Superfund sites, and to provide accurate and reliable data on that performance. Technologies selected must be of commercial scale and provide solutions to problems encountered at Superfund Sites. Primary emphasis in the RFP is on technologies that address: treatment of mixed, low level radioactive wastes in soils and groundwater; treatment of soils and sludges contaminated with organics and/or inorganics, materials handling as a preliminary step to treatment or further processing, treatment trains designed to handle specific wastes, are in situ technologies, especially those processes providing alternatives to conventional groundwater pump and treat techniques

  15. Technology transfer - insider protection workshop (Safeguards Evaluation Method - Insider Threat)

    International Nuclear Information System (INIS)

    Strait, R.S.; Renis, T.A.

    1986-01-01

    The Safeguards Evaluation Method - Insider Threat, developed by Lawrence Livermore National Laboratory, is a field-applicable tool to evaluate facility safeguards against theft or diversion of special nuclear material (SNM) by nonviolent insiders. To ensure successful transfer of this technology from the laboratory to DOE field offices and contractors, LLNL developed a three-part package. The package includes a workbook, user-friendly microcomputer software, and a three-day training program. The workbook guides an evaluation team through the Safeguards Evaluation Method and provides forms for gathering data. The microcomputer software assists in the evaluation of safeguards effectiveness. The software is designed for safeguards analysts with no previous computer experience. It runs on an IBM Personal Computer or any compatible machine. The three-day training program is called the Insider Protection Workshop. The workshop students learn how to use the workbook and the computer software to assess insider vulnerabilities and to evaluate the benefits and costs of potential improvements. These activities increase the students' appreciation of the insider threat. The workshop format is informal and interactive, employing four different instruction modes: classroom presentations, small-group sessions, a practical exercise, and ''hands-on'' analysis using microcomputers. This approach to technology transfer has been successful: over 100 safeguards planners and analysts have been trained in the method, and it is being used at facilities through the DOE complex

  16. End-User Evaluations of Semantic Web Technologies

    Energy Technology Data Exchange (ETDEWEB)

    McCool, Rob; Cowell, Andrew J.; Thurman, David A.

    2005-11-07

    Stanford University's Knowledge Systems Laboratory (KSL) is working in partnership with Battelle Memorial Institute and IBM Watson Research Center to develop a suite of technologies for information extraction, knowledge representation & reasoning, and human-information interaction, in unison entitled 'Knowledge Associates for Novel Intelligence' (KANI). We have developed an integrated analytic environment composed of a collection of analyst associates, software components that aid the user at different stages of the information analysis process. An important part of our participatory design process has been to ensure our technologies and designs are tightly integrate with the needs and requirements of our end users, To this end, we perform a sequence of evaluations towards the end of the development process that ensure the technologies are both functional and usable. This paper reports on that process.

  17. Development of in-pile test and evaluation technology

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Yung Hwan; Park, Jong Man; Joo, Kee Nam; Park, Duk Keun; Park, Se Jin; Oh, Jong Myung; Kim, Tae Ryong; Park Jin Suk; Lee, Jae Han [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-08-01

    To develop the in-pile test and evaluation technologies using KMRR, basic design of instrumented capsule and auxiliary system for material irradiation test and the related studies are performed. First, reactor and test hole characteristics are summarized, and conceptual design requirements of capsule to KMRR are reviewed. And fundamental principles and criteria for the instrumented capsule design are summarized. Basic design and analysis of instrumented capsule are performed, and design of capsule supporting system are also performed and structural integrity of the system is analyzed. Based on the prior studies, test mock-ups are designed and manufactured, and thermohydraulic and vibration tests are prepared. And, as in-pile test evaluation technologies, KMRR neutron dosimetry and mechanical tests related to material irradiation are investigated. 67 figs, 30 tabs, 41 refs. (Author).

  18. Evaluating HDR photos using Web 2.0 technology

    Science.gov (United States)

    Qiu, Guoping; Mei, Yujie; Duan, Jiang

    2011-01-01

    High dynamic range (HDR) photography is an emerging technology that has the potential to dramatically enhance the visual quality and realism of digital photos. One of the key technical challenges of HDR photography is displaying HDR photos on conventional devices through tone mapping or dynamic range compression. Although many different tone mapping techniques have been developed in recent years, evaluating tone mapping operators prove to be extremely difficult. Web2.0, social media and crowd-sourcing are emerging Internet technologies which can be harnessed to harvest the brain power of the mass to solve difficult problems in science, engineering and businesses. Paired comparison is used in the scientific study of preferences and attitudes and has been shown to be capable of obtaining an interval-scale ordering of items along a psychometric dimension such as preference or importance. In this paper, we exploit these technologies for evaluating HDR tone mapping algorithms. We have developed a Web2.0 style system that enables Internet users from anywhere to evaluate tone mapped HDR photos at any time. We adopt a simple paired comparison protocol, Internet users are presented a pair of tone mapped images and are simply asked to select the one that they think is better or click a "no difference" button. These user inputs are collected in the web server and analyzed by a rank aggregation algorithm which ranks the tone mapped photos according to the votes they received. We present experimental results which demonstrate that the emerging Internet technologies can be exploited as a new paradigm for evaluating HDR tone mapping algorithms. The advantages of this approach include the potential of collecting large user inputs under a variety of viewing environments rather than limited user participation under controlled laboratory environments thus enabling more robust and reliable quality assessment. We also present data analysis to correlate user generated qualitative

  19. Evaluation of a technology unit in a girls' primary school

    Science.gov (United States)

    Eke, Marion; Gardner, Paul L.

    1991-12-01

    Rapid advances in technology are changing the structure of the workforce. There are elite highly-paid hi-tech occupations and low status poorly-paid jobs. Women are unfortunately more likely to be found in the latter category. To allow them to qualify and compete for the higher-status positions, girls need to participate in the physical sciences and in technology studies. However, they are rarely attracted to them in secondary school, possibly because they are already alienated from them by the time they leave primary school. This paper reports some of the outcomes of a curriculum unit taught in two primary school classes in an independent school for girls. The unit was cross-curricular, involving technology, science and other fields of knowledge; it made extensive use of LEGO Technic materials. The evaluation of the unit, based on observations, a teacher journal and pupil questionnaires, focussed upon the issue of whether it assisted the girls to feel happier about working with unfamiliar technology and feel more capable of doing so. Implications for teaching technology are also discussed.

  20. Preparing Pre-Service Teachers to Integrate Technology into K-12 Instruction: Evaluation of a Technology-Infused Approach

    Science.gov (United States)

    Admiraal, Wilfried; van Vugt, Felix; Kranenburg, Frans; Koster, Bob; Smit, Ben; Weijers, Sanne; Lockhorst, Ditte

    2017-01-01

    The quality of how technology is addressed in teacher education programmes is conditional for how student teachers apply technology in secondary schools after their graduation. Two technology-infused courses of one teacher education programme were evaluated. In line with studies on the development of pre-service teachers' technological,…

  1. Technology development, evaluation, and application (TDEA) FY 1997 progress report

    International Nuclear Information System (INIS)

    Hoffman, L.G.

    1998-05-01

    The public expects that the Los Alamos National Laboratory (LANL) will operate in a manner that prevents negative impacts to the environment and protects the safety and health of its employees and the public. To achieve this goal within budget, the Department of Energy (DOE) and LANL must develop new and improved environment, safety, and health (ES and H) technologies and implement innovative, more cost-effective ES and H approaches to operations. In FY95, the Environment, Safety, and Health (ESH) Division initiated a Technology Development, Evaluation, and Application (TDEA) program. The purpose of this unique program is to test and develop technologies that solve LANL ES and H problems and improve the safety of LANL operations. This progress report presents the results of 10 projects funded in FY97 by the TDEA Committee of the Environment, Safety, and Health Division. Products generated from the projects funded in FY97 included implementation of radiation worker dosimetric monitoring systems (two); evaluation and validation of cost-effective animal-tracking systems for environmental studies (two); evaluation of personal protective equipment (two); and development of a method for optimal placement of continuous air monitors in the workplace

  2. Technology development, evaluation, and application (TDEA) FY 1997 progress report

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, L.G.

    1998-05-01

    The public expects that the Los Alamos National Laboratory (LANL) will operate in a manner that prevents negative impacts to the environment and protects the safety and health of its employees and the public. To achieve this goal within budget, the Department of Energy (DOE) and LANL must develop new and improved environment, safety, and health (ES and H) technologies and implement innovative, more cost-effective ES and H approaches to operations. In FY95, the Environment, Safety, and Health (ESH) Division initiated a Technology Development, Evaluation, and Application (TDEA) program. The purpose of this unique program is to test and develop technologies that solve LANL ES and H problems and improve the safety of LANL operations. This progress report presents the results of 10 projects funded in FY97 by the TDEA Committee of the Environment, Safety, and Health Division. Products generated from the projects funded in FY97 included implementation of radiation worker dosimetric monitoring systems (two); evaluation and validation of cost-effective animal-tracking systems for environmental studies (two); evaluation of personal protective equipment (two); and development of a method for optimal placement of continuous air monitors in the workplace.

  3. Mobile health technology evaluation: the mHealth evidence workshop.

    Science.gov (United States)

    Kumar, Santosh; Nilsen, Wendy J; Abernethy, Amy; Atienza, Audie; Patrick, Kevin; Pavel, Misha; Riley, William T; Shar, Albert; Spring, Bonnie; Spruijt-Metz, Donna; Hedeker, Donald; Honavar, Vasant; Kravitz, Richard; Lefebvre, R Craig; Mohr, David C; Murphy, Susan A; Quinn, Charlene; Shusterman, Vladimir; Swendeman, Dallas

    2013-08-01

    Creative use of new mobile and wearable health information and sensing technologies (mHealth) has the potential to reduce the cost of health care and improve well-being in numerous ways. These applications are being developed in a variety of domains, but rigorous research is needed to examine the potential, as well as the challenges, of utilizing mobile technologies to improve health outcomes. Currently, evidence is sparse for the efficacy of mHealth. Although these technologies may be appealing and seemingly innocuous, research is needed to assess when, where, and for whom mHealth devices, apps, and systems are efficacious. In order to outline an approach to evidence generation in the field of mHealth that would ensure research is conducted on a rigorous empirical and theoretic foundation, on August 16, 2011, researchers gathered for the mHealth Evidence Workshop at NIH. The current paper presents the results of the workshop. Although the discussions at the meeting were cross-cutting, the areas covered can be categorized broadly into three areas: (1) evaluating assessments; (2) evaluating interventions; and (3) reshaping evidence generation using mHealth. This paper brings these concepts together to describe current evaluation standards, discuss future possibilities, and set a grand goal for the emerging field of mHealth research. Published by Elsevier Inc. on behalf of American Journal of Preventive Medicine.

  4. Evaluation of Trenchless Installation Technology for Radioactive Wastewater Piping Applications

    International Nuclear Information System (INIS)

    Robinson, Sharon M.; Jubin, Robert Thomas; Patton, Bradley D.; Sullivan, Nicholas M.; Bugbee, Kathy P.

    2009-01-01

    The U.S. Department of Energy (DOE) Office of Environmental Management (EM) cleanup mission at Oak Ridge National Laboratory (ORNL) includes dispositioning facilities, contaminated legacy materials/waste, and contamination sources and remediation of soil under facilities, groundwater, and surface water to support final Records of Decision (RODs). The Integrated Facilities Disposition Project (IFDP) is a roughly $15B project for completion of the EM mission at Oak Ridge, with a project duration of up to 35 years. The IFDP Mission Need Statement - Critical Decision-0 (CD-0) - was approved by DOE in July 2007, and the IFDP Alternative Selection and Cost Range - Critical Decision-1 (CD-1) - was approved in November 2008. The IFDP scope includes reconfiguration of waste collection and treatment systems as needed to complete the IFDP remediation and decontamination and decommissioning (D and D) missions in a safe and cost-effective manner while maintaining compliance with all governing regulations and bodies and preserving the support of continuing operations at ORNL. A step in the CD-1 approval process included an external technical review (ETR) of technical approaches proposed in the CD-1 document related to the facility reconfiguration for the ORNL radioactive waste and liquid low-level waste management systems. The ETR team recommended that the IFDP team consider the use of trenchless technologies for installing pipelines underground in and around contaminated sites as part of the alternatives evaluations required in support of the CD-2 process. The team specifically recommended evaluating trenchless technologies for installing new pipes in existing underground pipelines as an alternative to conventional open trench installation methods. Potential benefits could include reduction in project costs, less costly underground piping, fewer disruptions of ongoing and surface activities, and lower risk for workers. While trenchless technologies have been used extensively in

  5. Health services research evaluation principles. Broadening a general framework for evaluating health information technology.

    Science.gov (United States)

    Sockolow, P S; Crawford, P R; Lehmann, H P

    2012-01-01

    Our forthcoming national experiment in increased health information technology (HIT) adoption funded by the American Recovery and Reinvestment Act of 2009 will require a comprehensive approach to evaluating HIT. The quality of evaluation studies of HIT to date reveals a need for broader evaluation frameworks that limits the generalizability of findings and the depth of lessons learned. Develop an informatics evaluation framework for health information technology (HIT) integrating components of health services research (HSR) evaluation and informatics evaluation to address identified shortcomings in available HIT evaluation frameworks. A systematic literature review updated and expanded the exhaustive review by Ammenwerth and deKeizer (AdK). From retained studies, criteria were elicited and organized into classes within a framework. The resulting Health Information Technology Research-based Evaluation Framework (HITREF) was used to guide clinician satisfaction survey construction, multi-dimensional analysis of data, and interpretation of findings in an evaluation of a vanguard community health care EHR. The updated review identified 128 electronic health record (EHR) evaluation studies and seven evaluation criteria not in AdK: EHR Selection/Development/Training; Patient Privacy Concerns; Unintended Consequences/ Benefits; Functionality; Patient Satisfaction with EHR; Barriers/Facilitators to Adoption; and Patient Satisfaction with Care. HITREF was used productively and was a complete evaluation framework which included all themes that emerged. We can recommend to future EHR evaluators that they consider adding a complete, research-based HIT evaluation framework, such as HITREF, to their evaluation tools suite to monitor HIT challenges as the federal government strives to increase HIT adoption.

  6. Spatial Modeling of a New Technological Typification in Forestry Based on Multicriteria Evaluation of Skidding Technologies

    Directory of Open Access Journals (Sweden)

    Michal Synek

    2015-01-01

    Full Text Available The study describes a new system of technological typification in forestry based on multicriteria evaluation of environmentally friendly use of common skidding technologies. A farm tractor, skidder, cable system, forwarder, and forwarder in combination with harvester were selected as model skidding technologies. The proposed model determines one of the four categories in terms of their environmentally friendly use: 1 Fully suitable, 2 Suitable, 3 Unsuitable – not excluded and 4 Unsuitable for every forest stand and individual skidding technology. The Saaty matrix was used to define weights of input parameters for multicriteria evaluation. The selected input parameters included: slope inclination, ground bearing capacity, risk of logging-transportation erosion hazard, presence and size of obstacles, skidding distance, terrain shape and age of stands. Stocking and areal representation of selected tree species were added to the evaluation of forwarder-harvester combination. Different equipment (standard tires, low-pressure tires, wheel tracks and climatic conditions (dry, wet were also taken into account in the evaluation of the model. A multicriteria evaluation was carried out by means of GIS tools in SW ESRI ArcGIS Desktop. The model was applied to the selected experimental territory in the upper part of the basin of the Oskava river and it was verified in different forest stands and terrain conditions in the northern part of the Mendel University Training Forest Enterprise Křtiny. Verification of model results was carried out in randomly selected stands with the overall area representing more than 10% of the total forest area in the experimental territory and more than 8% of the total forest area in the verification territory.

  7. Site Characterization Analysis Penetrometer System (SCAPS): An Innovative Technology Evaluation Report

    National Research Council Canada - National Science Library

    Jack, Lary

    1995-01-01

    ... of subsurface soil at hazardous waste sites. The effectiveness of each technology was evaluated by comparing each technology's results to the results obtained using conventional reference methods...

  8. Design and evaluation of the ONC health information technology curriculum.

    Science.gov (United States)

    Mohan, Vishnu; Abbott, Patricia; Acteson, Shelby; Berner, Eta S; Devlin, Corkey; Hammond, William E; Kukafka, Rita; Hersh, William

    2014-01-01

    As part of the Heath Information Technology for Economic and Clinical Health (HITECH) Act, the Office of the National Coordinator for Health Information Technology (ONC) implemented its Workforce Development Program, which included initiatives to train health information technology (HIT) professionals in 12 workforce roles, half of them in community colleges. To achieve this, the ONC tasked five universities with established informatics programs with creating curricular materials that could be used by community colleges. The five universities created 20 components that were made available for downloading from the National Training and Dissemination Center (NTDC) website. This paper describes an evaluation of the curricular materials by its intended audience of educators. We measured the quantity of downloads from the NTDC site and administered a survey about the curricular materials to its registered users to determine use patterns and user characteristics. The survey was evaluated using mixed methods. Registered users downloaded nearly half a million units or components from the NTDC website. We surveyed these 9835 registered users. 1269 individuals completed all or part of the survey, of whom 339 identified themselves as educators (26.7% of all respondents). This paper addresses the survey responses of educators. Successful aspects of the curriculum included its breadth, convenience, hands-on and course planning capabilities. Several areas were identified for potential improvement. The ONC HIT curriculum met its goals for community college programs and will likely continue to be a valuable resource for the larger informatics community in the future.

  9. ¡Ya no estás en la casa! Tecnologías de la escolarización - You are already in the house! Technologies of schooling

    Directory of Open Access Journals (Sweden)

    Alberto Martínez Boom, Colômbia

    2012-08-01

    Full Text Available JÁ NÃO ESTÁS EM CASA! TECNOLOGIAS DE ESCOLARIZAÇÃOResumoO fenômeno da escolarização pode ser analisado por diferentes abordagens. Alguns o estudam como um fato, outros o observam como uma decisão política, outros ainda estão interessados em sua função social como um fator de inclusão. Este trabalho não trabalha com esses registros. Procura se deter mais na descrição de certos detalhes dos começos; por isso o uso de fontes primárias e documentos de época, para mostrar o processo que conecta o surgimento da escola pública com a expansão da escolarização como dispositivo governamental, ou seja, uma prática que passa por descrever minúcias do espaço e do tempo de escola, a geometrização do corpo infantil,  a ênfase na sua  quietude e obediência como caminhos de escolarização que podem ser entendidos e associado a uma ortopedia moral.Palavras-chave: escolarização, ortopedia moral, planos de escola, geometrização do corpo. YOU ARE ALREADY IN THE HOUSE! TECHNOLOGIES OF SCHOOLINGAbstractThe phenomenon of schooling can be analyzed from diverse approaches, some of them study it like a datum, some see it like a political decision, some others are interested in its social function as an inclusion factor; this work does not include those perspectives. It is better focus on the description of certain details of the beginning, for that reason the use of primary sources and documents of the epoch, to show the process that links the emergence of the public school with the wideness of the schooling like governmental mechanism, which means, a practice that describes the trifles of the school space and time, the geometrization of the infant body, the insistence on his quietness, stillness and obedience like principles of a schooling that can be understood and associated to a moral orthopaedics.Keywords: schooling, moral orthopaedics, school plans, body geometrization. ¡YA NO ESTÁS EN LA CASA! TECNOLOGÍAS DE LA

  10. A reflexive evaluation of technology-enhanced learning

    Directory of Open Access Journals (Sweden)

    Suzanne Young

    2017-11-01

    Full Text Available This article explores the lived experiences of two academics in a UK Higher Education Institution who have embedded digital learning approaches within their curriculum delivery. Achieving student excellence can be impeded by a lack of engagement and sense of identity on large courses. Digital learning strategies can offer opportunities to overcome these challenges by empowering students to engage self-confidently. Through an evaluation of the authors’ own experiences of using social media, polling and web-conferencing software, the article shows how interacting with students via a range of learning technologies can create more inclusive and engaging learning environments. Including feedback from students within this article provides evidence that diversification of communication within teaching and learning practice gives students more choice and opportunity to interact with both their peers and teaching staff. The article concludes with recommendations for embedding technology, whilst acknowledging the well-established value of face-to-face interaction.

  11. Evaluation of airborne thermal, magnetic, and electromagnetic characterization technologies

    International Nuclear Information System (INIS)

    Josten, N.E.

    1992-03-01

    The identification of Buried Structures (IBS) or Aerial Surveillance Project was initiated by the US Department of Energy (DOE) Office of Technology Development to demonstrate airborne methods for locating and identifying buried waste and ordnance at the Idaho National Engineering Laboratory (INEL). Two technologies were demonstrated: (a) a thermal infrared imaging system built by Martin Marietta Missile Systems and (b) a magnetic and electromagnetic (EM) geophysical surveying system operated by EBASCO Environmental. The thermal system detects small differences in ground temperature caused by uneven heating and cooling of the ground by the sun. Waste materials on the ground can be detected when the temperature of the waste is different than the background temperature. The geophysical system uses conventional magnetic and EM sensors. These sensors detect disturbances caused by magnetic or conductive waste and naturally occurring magnetic or conductive features of subsurface soils and rock. Both systems are deployed by helicopter. Data were collected at four INEL sites. Tests at the Naval Ordnance Disposal Area (NODA) were made to evaluate capabilities for detecting ordnance on the ground surface. Tests at the Cold Simulated Waste Demonstration Pit were made to evaluate capabilities for detecting buried waste at a controlled site, where the location and depth of buried materials are known. Tests at the Subsurface Disposal Area and Stationary Low-Power Reactor-1 burial area were made to evaluate capabilities for characterizing hazardous waste at sites that are typical of DOE buried waste sites nationwide

  12. Evaluation of airborne thermal, magnetic, and electromagnetic characterization technologies

    Energy Technology Data Exchange (ETDEWEB)

    Josten, N.E.

    1992-03-01

    The identification of Buried Structures (IBS) or Aerial Surveillance Project was initiated by the US Department of Energy (DOE) Office of Technology Development to demonstrate airborne methods for locating and identifying buried waste and ordnance at the Idaho National Engineering Laboratory (INEL). Two technologies were demonstrated: (a) a thermal infrared imaging system built by Martin Marietta Missile Systems and (b) a magnetic and electromagnetic (EM) geophysical surveying system operated by EBASCO Environmental. The thermal system detects small differences in ground temperature caused by uneven heating and cooling of the ground by the sun. Waste materials on the ground can be detected when the temperature of the waste is different than the background temperature. The geophysical system uses conventional magnetic and EM sensors. These sensors detect disturbances caused by magnetic or conductive waste and naturally occurring magnetic or conductive features of subsurface soils and rock. Both systems are deployed by helicopter. Data were collected at four INEL sites. Tests at the Naval Ordnance Disposal Area (NODA) were made to evaluate capabilities for detecting ordnance on the ground surface. Tests at the Cold Simulated Waste Demonstration Pit were made to evaluate capabilities for detecting buried waste at a controlled site, where the location and depth of buried materials are known. Tests at the Subsurface Disposal Area and Stationary Low-Power Reactor-1 burial area were made to evaluate capabilities for characterizing hazardous waste at sites that are typical of DOE buried waste sites nationwide.

  13. Estimating costs in the economic evaluation of medical technologies.

    Science.gov (United States)

    Luce, B R; Elixhauser, A

    1990-01-01

    The complexities and nuances of evaluating the costs associated with providing medical technologies are often underestimated by analysts engaged in economic evaluations. This article describes the theoretical underpinnings of cost estimation, emphasizing the importance of accounting for opportunity costs and marginal costs. The various types of costs that should be considered in an analysis are described; a listing of specific cost elements may provide a helpful guide to analysis. The process of identifying and estimating costs is detailed, and practical recommendations for handling the challenges of cost estimation are provided. The roles of sensitivity analysis and discounting are characterized, as are determinants of the types of costs to include in an analysis. Finally, common problems facing the analyst are enumerated with suggestions for managing these problems.

  14. H Scan/AHP advanced technology proposal evaluation process

    Energy Technology Data Exchange (ETDEWEB)

    Mack, S. [Energetics, Inc., Columbia, MD (United States); Valladares, M.R.S. de [National Renewable Energy Lab., Washington, DC (United States)

    1996-10-01

    It is anticipated that a family of high value/impact projects will be funded by the Hydrogen Program to field test hydrogen technologies that are at advanced stages of development. These projects will add substantial value to the Program in several ways, by: demonstrating successful integration of multiple advanced technologies, providing critical insight on issues of larger scale equipment design, construction and operations management, yielding cost and performance data for competitive analysis, refining and deploying enhanced safety measures. These projects will be selected through a competitive proposal evaluation process. Because of the significant scope and funding levels of projects at these development phases, Program management has indicated the need for an augmented proposal evaluation strategy to ensure that supported projects are implemented by capable investigative teams and that their successful completion will optimally advance programmatic objectives. These objectives comprise a complex set of both quantitative and qualitative factors, many of which can only be estimated using expert judgment and opinion. To meet the above need, the National Renewable Energy Laboratory (NREL) and Energetics Inc. have jointly developed a proposal evaluation methodology called H Scan/AHP. The H Scan component of the process was developed by NREL. It is a two-part survey instrument that substantially augments the type and scope of information collected in a traditional proposal package. The AHP (Analytic Hierarchy Process) component was developed by Energetics. The AHP is an established decision support methodology that allows the Program decision makers to evaluate proposals relatively based on a unique set of weighted criteria that they have determined.

  15. Avaliação no estágio curricular de administração em enfermagem: perspectiva dialética Evaluación en el estágio curricular de administración en enfermería: perspectiva dialetica Evaluation of the curricular clerkship in nursing administration: dialectical perspective

    Directory of Open Access Journals (Sweden)

    Cláudia Prado

    2010-06-01

    Full Text Available Este relato de experiência teve por objetivo descrever o processo de avaliação no Estágio Curricular de Administração em Enfermagem do Curso de Graduação da Escola de Enfermagem da Universidade de São Paulo, à luz da metodologia dialética. Nesta perspectiva, o conhecimento é construído em três momentos: síncrese, análise e síntese, em que a tarefa pedagógica do professor é mediar as fases de mobilização, construção e síntese do conhecimento por meio da dúvida e da crítica. Concluiu-se que avaliação da aprendizagem valorizou as relações interpessoais e a participação dos sujeitos envolvidos, por meio do acolhimento e estabelecimento de vínculos em todo o processo, favorecendo a concepção do conhecimento a partir da problematização da práxis criando situações construtivas e significativas, desenvolvendo múltiplas competências.Este informe de experiencia tuvo el objetivo de describir el proceso de evaluación en el estagio curricular de administración en enfermería del Curso de Graduación de la Escuela de Enfermería de la Universidad de São Paulo, bajo la luz de la metodología dialéctica. En esta perspectiva, el conocimiento se construye en tres momentos: síncrese, análisis y síntesis, en que la tarea pedagógica del docente es mediar las etapas de movilización, de construcción y de síntesis del conocimiento producido a través de la duda y de la crítica. Se concluyó que la evaluación del aprendizaje valoró las relaciones interpersonales y la participación de los sujetos implicados, a través de la acogida y el establecimiento de vínculos en todo el proceso, alentando la concepción del conocimiento a partir de la creación de situaciones problemáticas de la praxis, creando situaciones constructivas y significativas desarrollando múltiples competencias.This experience report had as purpose to describe the evaluation process in curriculum clerckship of nursing administration in the

  16. Evaluation technology of clothing comfortableness; Ifuku tekigosei hyoka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Niwaya, H.

    1999-10-26

    Modern apparel industries are required to supply many kinds of products corresponding to various needs of consumers. Among consumers' needs, comfortableness to wear such as size-fitness is primarily important. To facilitate apparel industries, it is expected to develop a new technology of pattern designing of comfortable garment and measuring garment pressure distribution. Our research is aimed at developing technology that uses computer simulation to predict and evaluate wear comfort, including size suitability, without the need to actually sew up a garment. First, we developed a basic system to predict wearing silhouette, garment pressure, and ease looseness of the garment. Using this system, we carried on the following study. The 3-dimensional distributions of the garment pressure and ease looseness were reversely mapped on the paper pattern in order to indicate the preferable modification. The system was extended for several poses, e.g. twist, bend. From various parameters, we examined the factors of garment pressure and ease looseness. In addition, we selected the parameters for the size-fit indicators and investigated size-fit evaluation indicators. (author)

  17. IN SITU STEAM ENHANCED RECOVERY PROCESS - HUGHES ENVIRONMENTAL SYSTEMS, INC. - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This Innovative Technology Evaluation report summarizes the findings of an evaluation of the in situ Steam Enhanced Recovery Process (SERP) operated by Hughes Environmental Systems, Inc. at the Rainbow Disposal facility in Huntington Beach, California. he technology demonstration...

  18. AcEST: DK948090 [AcEST

    Lifescience Database Archive (English)

    Full Text Available erase A OS=Aspergillus tubingen... 50 1e-05 sp|P0C1S9|DGLB_RAT Sn1-specific diacy...|P47145|YJ77_YEAST Putative lipase YJR107W OS=Saccharomyces ce... 50 8e-06 sp|O42815|FAEA_ASPTU Feruloyl est

  19. Technologies for Nondestructive Evaluation of Surfaces and Thin Coatings

    Science.gov (United States)

    1999-01-01

    The effort included in this project included several related activities encompassing basic understanding, technological development, customer identification and commercial transfer of several methodologies for nondestructive evaluation of surfaces and thin surface coatings. Consistent with the academic environment, students were involved in the effort working with established investigators to further their training, provide a nucleus of experienced practitioners in the new technologies during their industrial introduction, and utilize their talents for project goals. As will be seen in various portions of the report, some of the effort has led to commercialization. This process has spawned other efforts related to this project which are supported from outside sources. These activities are occupying the efforts of some of the people who were previously supported within this grant and its predecessors. The most advanced of the supported technologies is thermography, for which the previous joint efforts of the investigators and NASA researchers have developed several techniques for extending the utility of straight thermographic inspection by producing methods of interpretation and analysis accessible to automatic image processing with computer data analysis. The effort reported for this technology has been to introduce the techniques to new user communities, who are then be able to add to the effective uses of existing products with only slight development work. In a related development, analysis of a thermal measurement situation in past efforts led to a new insight into the behavior of simple temperature probes. This insight, previously reported to the narrow community in which the particular measurement was made, was reported to the community of generic temperature measurement experts this year. In addition to the propagation of mature thermographic techniques, the development of a thermoelastic imaging system has been an important related development. Part of the

  20. Process metallurgical evaluation and application of very fine bubbling technology

    Energy Technology Data Exchange (ETDEWEB)

    Catana, C.; Gotsis, V.S.; Dourdounis, E.; Angelopoulos, G.N.; Papamantellos, D.C. [Lab. of Metallurgy, Univ. of Patras, Rio (Greece); Mavrommatis, K. [IEHK, RWTH Aachen, Aachen (Germany)

    2002-12-01

    The potential of VFB (Very Fine Bubbling)-technology in steelmaking, developed for the production of super clean steels, was investigated. Recent R and D work has proven that with very fine argon bubbling through a developed Special Porous Plug (SPP) at low flow rates, the total oxygen content of low carbon steel grades can be lowered to a level of 6 ppm under industrial vacuum conditions and to a level of 10 ppm under argon protective atmosphere. The perspective of industrial application of the VFB technology to a 56-t ladle furnace of Helliniki Halyvourgia S.A., Greece, in order to improve steel cleanliness, requires additional R and D efforts. It is important to define the limits of VFB technology in respect of alloys dissolution, mixing time and homogenisation of steel and slag/metal reactions. In this work, a gas driven bubble aqueous reactor model simulating the bottom gas stirred ladle by means of gas injection through a SPP and a conventional porous plug was studied. Various operating conditions as well as different positions for the porous plug with and without a top oil layer were simulated. Tests concerning mixing time, solid-liquid mass transfer and critical gas flow rate, liquid/liquid mass transfer, using the SPP and a conventional porous plug have been performed. The evaluation of experimental results delivered important information for the design and operation of steel ladles, applying VFB-technology. Experimental results with SPP bubbles' agitated steel (1600 C) in laboratory and technical scale experiments in IF and VIF are presented and discussed. (orig.)

  1. Using Innovative Technologies for Manufacturing and Evaluating Rocket Engine Hardware

    Science.gov (United States)

    Betts, Erin M.; Hardin, Andy

    2011-01-01

    Many of the manufacturing and evaluation techniques that are currently used for rocket engine component production are traditional methods that have been proven through years of experience and historical precedence. As we enter into a new space age where new launch vehicles are being designed and propulsion systems are being improved upon, it is sometimes necessary to adopt new and innovative techniques for manufacturing and evaluating hardware. With a heavy emphasis on cost reduction and improvements in manufacturing time, manufacturing techniques such as Direct Metal Laser Sintering (DMLS) and white light scanning are being adopted and evaluated for their use on J-2X, with hopes of employing both technologies on a wide variety of future projects. DMLS has the potential to significantly reduce the processing time and cost of engine hardware, while achieving desirable material properties by using a layered powdered metal manufacturing process in order to produce complex part geometries. The white light technique is a non-invasive method that can be used to inspect for geometric feature alignment. Both the DMLS manufacturing method and the white light scanning technique have proven to be viable options for manufacturing and evaluating rocket engine hardware, and further development and use of these techniques is recommended.

  2. DEMONSTRATION OF AQUAFIX AND SAPS PASSIVE MINE WATER TREATMENT TECHNOLOGIES AT SUMMITVILLE MINE SITE, INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    As part of the Superfund Innovative Technology Evaluation (SITE) Program, the U.S. Environmental Protection Agency evaluated two passive water treatment (PWT) technologies for metals removal from acid mine drainage (AMD) at the Summitville Mine Superfund Site in southern Colorado...

  3. Enhanced Geothermal Systems (EGS) well construction technology evaluation report.

    Energy Technology Data Exchange (ETDEWEB)

    Capuano, Louis, Jr. (Thermasource Inc.); Huh, Michael; Swanson, Robert (Thermasource Inc.); Raymond, David Wayne; Finger, John Travis; Mansure, Arthur James; Polsky, Yarom; Knudsen, Steven Dell

    2008-12-01

    Electricity production from geothermal resources is currently based on the exploitation of hydrothermal reservoirs. Hydrothermal reservoirs possess three ingredients critical to present day commercial extraction of subsurface heat: high temperature, in-situ fluid and high permeability. Relative to the total subsurface heat resource available, hydrothermal resources are geographically and quantitatively limited. A 2006 DOE sponsored study led by MIT entitled 'The Future of Geothermal Energy' estimates the thermal resource underlying the United States at depths between 3 km and 10 km to be on the order of 14 million EJ. For comparison purposes, total U.S. energy consumption in 2005 was 100 EJ. The overwhelming majority of this resource is present in geological formations which lack either in-situ fluid, permeability or both. Economical extraction of the heat in non-hydrothermal situations is termed Enhanced or Engineered Geothermal Systems (EGS). The technologies and processes required for EGS are currently in a developmental stage. Accessing the vast thermal resource between 3 km and 10 km in particular requires a significant extension of current hydrothermal practice, where wells rarely reach 3 km in depth. This report provides an assessment of well construction technology for EGS with two primary objectives: (1) Determining the ability of existing technologies to develop EGS wells. (2) Identifying critical well construction research lines and development technologies that are likely to enhance prospects for EGS viability and improve overall economics. Towards these ends, a methodology is followed in which a case study is developed to systematically and quantitatively evaluate EGS well construction technology needs. A baseline EGS well specification is first formulated. The steps, tasks and tools involved in the construction of this prospective baseline EGS well are then explicitly defined by a geothermal drilling contractor in terms of sequence, time and

  4. Evaluation of Mars CO2 Capture and Gas Separation Technologies

    Science.gov (United States)

    Muscatello, Anthony C.; Santiago-Maldonado, Edgardo; Gibson, Tracy; Devor, Robert; Captain, James

    2011-01-01

    Recent national policy statements have established that the ultimate destination of NASA's human exploration program is Mars. In Situ Resource Utilization (ISRU) is a key technology required to ,enable such missions and it is appropriate to review progress in this area and continue to advance the systems required to produce rocket propellant, oxygen, and other consumables on Mars using the carbon dioxide atmosphere and other potential resources. The Mars Atmospheric Capture and Gas separation project is selecting, developing, and demonstrating techniques to capture and purify Martian atmospheric gases for their utilization for the production of hydrocarbons, oxygen, and water in ISRU systems. Trace gases will be required to be separated from Martian atmospheric gases to provide pure CO2 to processing elements. In addition, other Martian gases, such as nitrogen and argon, occur in concentrations high enough to be useful as buffer gas and should be captured as well. To achieve these goals, highly efficient gas separation processes will be required. These gas separation techniques are also required across various areas within the ISRU project to support various consumable production processes. The development of innovative gas separation techniques will evaluate the current state-of-the-art for the gas separation required, with the objective to demonstrate and develop light-weight, low-power methods for gas separation. Gas separation requirements include, but are not limited to the selective separation of: (1) methane and water from unreacted carbon oxides (C02-CO) and hydrogen typical of a Sabatier-type process, (2) carbon oxides and water from unreacted hydrogen from a Reverse Water-Gas Shift process, (3)/carbon oxides from oxygen from a trash/waste processing reaction, and (4) helium from hydrogen or oxygen from a propellant scavenging process. Potential technologies for the separations include' freezers, selective membranes, selective solvents, polymeric sorbents

  5. Informal Evaluation and Institutionalization of Neoteric Technology Ideas

    DEFF Research Database (Denmark)

    Ulrich, Frank; Mengiste, Shegaw Anagaw; Müller, Sune Dueholm

    2015-01-01

    in existing institutionalized technologies within the organization and that emerging technologies introduce neoteric ideas to the organization. Furthermore, we argue that when attempting to introduce technology-based ideas, human actors will focus their attention on ideas embedded in existing...... theories of creativity, Scandinavian institutionalism, and empirical data from two Danish organizations, this article investigates the interplay between creativity, technology, and human sensemaking in the process of translating and transforming technology ideas into full-fledged technological innovations....

  6. Life cycle evaluation of emerging lignocellulosic ethanol conversion technologies.

    Science.gov (United States)

    Spatari, Sabrina; Bagley, David M; MacLean, Heather L

    2010-01-01

    Lignocellulosic ethanol holds promise for addressing climate change and energy security issues associated with personal transportation through lowering the fuel mixes' carbon intensity and petroleum demand. We compare the technological features and life cycle environmental impacts of near- and mid-term ethanol bioconversion technologies in the United States. Key uncertainties in the major processes: pre-treatment, hydrolysis, and fermentation are evaluated. The potential to reduce fossil energy use and greenhouse gas (GHG) emissions varies among bioconversion processes, although all options studied are considerably more attractive than gasoline. Anticipated future performance is found to be considerably more attractive than that published in the literature as being achieved to date. Electricity co-product credits are important in characterizing the GHG impacts of different ethanol production pathways; however, in the absence of near-term liquid transportation fuel alternatives to gasoline, optimizing ethanol facilities to produce ethanol (as opposed to co-products) is important for reducing the carbon intensity of the road transportation sector and for energy security.

  7. Risk-benefit evaluation for large technological systems

    International Nuclear Information System (INIS)

    Okrent, D.

    1979-01-01

    The related topics of risk-benefit analysis, risk analysis, and risk-acceptance criteria (How safe is safe enough) are of growing importance. An interdisciplinary study on various aspects of these topics, including applications to nuclear power, was recently completed at the University of California, Los Angeles (UCLA), with the support of the National Science Foundation. In addition to more than 30 topical reports and various open-literature publications, a final report (UCLA-ENG-7777) to the study, titled ''A Generalized Evaluation Approach to Risk--Benefit for Large Technological Systems and Its Application to Nuclear Power'', was issued in early 1978. This article briefly summarizes portions of the final report dealing with general aspects of risk-benefit methodology, societal knowledge and perception of risk, and risk-acceptance criteria

  8. NASA Technology Evaluation for Environmental Risk Mitigation Remediation Technology Collaboration Development

    Science.gov (United States)

    Romeo, James

    2013-01-01

    NASA is committed to finding solutions to agency cleanup problems that are better, cheaper, and more effective than the status quo. Unfortunately, some potential solutions involve innovative technologies for which NASA remediation managers may not have a high level of understanding or confidence. Since 2004, NASA's Stennis Space Center (SSC) in Mississippi has been pumping groundwater contaminated with trichloroethylene (TCE) and other halogenated volatile organic compounds (HVOC) from their cleanup location designated "Area G" through extraction wells to an aboveground treatment system. Over time, however, the effectiveness of this treatment strategy has diminished and an alternative approach is needed. In 2012, professionals from NASA's Principal Center for Technology Evaluation for Environmental Risk Mitigation (TEERM) introduced SSC managers to an innovative technology for enhancing the performance of SSC's existing pump and treat system. The technology, generally referred to as in situ chemical oxidation (ISCO), involves slowly and continuously injecting a strong but safe chemical oxidant into the groundwater. Treatment is enhanced by a "surfactant-type effect" which causes residual contamination from saturated soil to be released into the dissolved-phase where it can be readily oxidized. Any dissolved-phase contamination that was not oxidized can be collected by the extraction well network and treated aboveground. SSC was not familiar with the technology so to increase their confidence, TEERM identified a contractor who was willing to demonstrate their product and process at a significantly reduced price. An initial, small-scale demonstration of ISCO began at sse in March 2012 and completed in August 2012. This successful demonstration was followed by three larger-scale ISCO demonstrations between August and December 2012. The contractor's innovative Continuous Injection System (CIS) incorporated "green" and sustainable technologies and practices. A slow

  9. Technology development for evaluation of operational quantities in radiation protection

    International Nuclear Information System (INIS)

    Jang, Si Young; Lee, T. Y.; Kim, B. H.

    2003-03-01

    Korean government recently published a national regulation on the internal exposure monitoring and dose evaluation (internal dosimetry) based on the most recent ICRP recommendation 60 and subsequent publications, which supercede the former ICRP recommendation 26 and publication 30, on which the internal dosimetry practice in Korea had been based so far. Consequently, this project, according to the demand from both government and nuclear industry, had been launched to develop a user-friendly computer code on internal dosimetry adopting the most up to date ICRP biokinetic and dosimetric model to resolve the difficulties and problems faced to nuclear industry and to develop related technology. The reliability of this code, named as BiDAS, as a result of several benchmark calculations for self assurance appeared to be excellent comparing with the foreign computer code. This computer code is expected to be successfully utilized in nuclear industry and related fields in complying with the national regulation on internal dosimetry program started from late 2003. Reference low level gamma(γ) radiation field for calibration of environmental radiation(γ) monitor and reference neutron field for calibration of n monitoring equipment have been established and characterized. International cross comparison of these reference radiation fields have been performed and radiation response of various radiation monitoring instrument has been tested by using these reference radiation fields. A technology which can directly measure the radiation quality factor and tissue absorbed dose has been established to evaluate the neutron dose in terms of operational quantity in the unknown mixed n-γ radiation field. Spherical and cylindrical TEPC systems have been designed and manufactured and a portable TEPC system to measure the neutron quality and dose in the real work field has been developed and tested in accelerator laboratory

  10. Development of evaluation and performance verification technology for radiotherapy radiation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J. Y.; Jang, S. Y.; Kim, B. H. and others

    2005-02-15

    No matter how much the importance is emphasized, the exact assessment of the absorbed doses administered to the patients to treat the various diseases such as lately soaring malignant tumors with the radiotherapy practices is the most important factor. In reality, several over-exposed patients from the radiotherapy practice become very serious social issues. Especially, the development of a technology to exactly assess the high doses and high energies (In general, dose administered to the patients with the radiotherapy practices are very huge doses, and they are about three times higher than the lethal doses) generated by the radiation generators and irradiation equipment is a competing issue to be promptly conducted. Over fifty medical centers in Korea operate the radiation generators and irradiation equipment for the radiotherapy practices. However, neither the legal and regulatory systems to implement a quality assurance program are sufficiently stipulated nor qualified personnel who could run a program to maintain the quality assurance and control of those generators and equipment for the radiotherapy practices in the medical facilities are sufficiently employed. To overcome the above deficiencies, a quality assurance program such as those developed in the technically advanced countries should be developed to exactly assess the doses administered to patients with the radiotherapy practices and develop the necessary procedures to maintain the continuing performance of the machine or equipment for the radiotherapy. The QA program and procedures should induce the fluent calibration of the machine or equipment with quality, and definitely establish the safety of patients in the radiotherapy practices. In this study, a methodology for the verification and evaluation of the radiotherapy doses is developed, and several accurate measurements, evaluations of the doses delivered to patients and verification of the performance of the therapy machine and equipment are

  11. Stereotactic Radiation Therapy for Liver Tumours. Technological evaluation report

    International Nuclear Information System (INIS)

    Zeghari-Squalli, Nadia

    2016-09-01

    The purpose of this report was to analyse the efficacy and safety data of Stereotactic Body Radiation Therapy (SBRT) in patients with inoperable primary (hepatocellular carcinoma (HCC) and metastatic liver tumors (LM), to define the indications and the place of SBRT in the therapeutic strategy with the aim of its inclusion in the CCAM (French National list of reimbursement). The key points that arose from this assessment are the following: - The results are preliminary and the literature is inconclusive about safety and efficacy; - There are no standardised guidelines for: the indications, the eligibility criteria, the treatment protocols or the place of SBRT in the therapeutic strategy; - SBRT is a technique that requires great rigorous radioprotection and quality assurance procedures; the professionals and National institutions concerned recommend that SBRT only be performed in centres with sufficient resources, specific expertise and an organisation which guarantees that the quality assurance procedures will be respected. Recommendations HAS believes it is premature to recommend SBRT for the routine treatment of liver tumors and its reimbursement by the National Health Insurance (Assurance Maladie). HAS recommends its use in the strict context of clinical research by centres with sufficient resources, specific expertise and an organisation which guarantees that the quality assurance procedures will be respected. The literature search strategy prioritized randomised comparative studies and systematic reviews; If these were not available then non-randomised controlled trials, prospective studies were to be used and finally retrospective studies and case series were to be used. The assessment of SRBT for liver tumors was based on the critical analysis of clinical data from: - Three prospective case series, five retrospective case series, four health technology evaluation reports and 11 good practice recommendations, for primary liver tumors (HCC) - One prospective

  12. Comparative economic evaluation of environmental impact of different cogeneration technologies

    International Nuclear Information System (INIS)

    Patrascu, Roxana; Athanasovici, Victor; Raducanu, Cristian; Minciuc, Eduard; Bitir-Istrate, Ioan

    2004-01-01

    Cogeneration is one of the most powerful technologies for reduction of environmental pollution along with renewable energies. At the Kyoto Conference cogeneration has been identified as being the most important measure for reducing emissions of greenhouse effect gases. It has also been mentioned that cogeneration has a potential of reducing pollution with about 180 million tones per year. In order to promote new cogeneration technologies and evaluate the existing ones it is necessary to know and to be able to quantify in economical terms the environmental issues. When comparing different cogeneration technologies: steam turbine (TA), gas turbine (TG), internal combustion engine (MT), in order to choose the best one, the final decision implies an economic factor, which is even more important if it includes the environmental issues. The environmental impact of different cogeneration technologies is quantified using different criteria: depletion of non-renewable natural resources, eutrofisation, greenhouse effect, acidification etc. Environmental analysis using these criteria can be made using the 'impact with impact' methodology or the global one. The results of such an analysis cannot be quantified economically directly. Therefore there is a need of internalisation of ecological effects within the costs of produced energy: electricity and heat. In the energy production sector the externalizations represent the indirect effects on the environment. They can be materialised within different types of environmental impact: - Different buildings of mines, power plants etc; - Fuel losses during transportation and processing; - Effect of emissions in the air, water and soil. Introduction of the environmental impact costs in the energy price is called internalisation and it can be made using the direct and indirect methods. The paper discusses aspects regarding the emissions of cogeneration systems, the eco-taxes - method of 'internalisation' of environmental

  13. Evaluation of the efficiency of alternative enzyme production technologies

    Energy Technology Data Exchange (ETDEWEB)

    Albaek, M.O.

    2012-03-15

    fermentation technologies for enzyme production were identified in the open literature. Their mass transfer capabilities and their energy efficiencies were evaluated by use of the process model. For each technology the scale-up enzyme production was simulated at industrial scale based on equal mass transfer. The technical feasibility of each technology was assessed based on prior knowledge of successful implementation at industrial scale and mechanical complexity of the fermentation vessel. The airlift reactor was identified as a potential high energy efficiency technology for enzyme production with excellent chances for success. Two different pilot plant configurations of the airlift reactor technology were tested in nine fermentations. The headspace pressure was varied between 0.1 and 1.1 barg and the superficial gas velocity in the airlift riser section was varied between 0.02 and 0.06 m/s. The biological model developed in the stirred tank reactor was shown to apply to the airlift reactor with only small modifications: The mass transfer of oxygen in the airlift reactor was studied and a mass transfer correlation containing the superficial gas velocity and the apparent viscosity of the fermentation broth was shown to describe the experimental data well. The mass transfer rate was approximately 20% lower than the literature data for airlift reactors. Mixing in the pilot scale airlift reactor was also studied. As the mixing time was of the same order of magnitude as the characteristic time for oxygen transfer, mixing could also be limiting the process at that scale. The process model for the airlift reactor was also shown to describe the experimental data well for a range of process conditions. A cost function for oxygen transfer including the equipment cost and running cost for nutrients and electricity was developed for both the stirred tank reactor and the airlift reactor. The cost function was used to identify an optimum range of reactor configuration and process

  14. Applying the System Component and Operationally Relevant Evaluation (SCORE) Framework to Evaluate Advanced Military Technologies

    Science.gov (United States)

    2010-03-01

    and charac- terize the actions taken by the soldier (e.g., running, walking, climbing stairs ). Real-time image capture and exchange N The ability of...multimedia information sharing among soldiers in the field, two-way speech translation systems, and autonomous robotic platforms. Key words: Emerging...soldiers in the field, two-way speech translation systems, and autonomous robotic platforms. It has been the foundation for 10 technology evaluations

  15. Study on the evaluation of decontamination and decommissioning technologies and their demands in Korea

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Won Zin; Lee, K. W.; Jung, C. H.; Choi, W. K.; Won, H. J.; Kim, G. N.; Jung, K. J.; Chung, U. S.; Lee, D. G.; Kim, C. J.; Kim, S. H.; Chung, J. M.; Kwon, S. O. [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2001-03-01

    D and D market demand, the current status of the technology, technology items applicable to the domestic market and the future prospect of technologies not self-developed in Korea were evaluated. In the evaluation of D and D market demand and the current status of the technology, 1) the market demand was investigated on the D and D objects such as the research reactors, the nuclear power plants and the nuclear fuel cycle development facilities from 2001 to 2010, and 2) the technology demand for decommissioning of the nuclear power plants from 2001 to 2030 were investigated. In the evaluation of the technology items applicable to the domestic market, 1) the analysis of the technologies derived from the technology requirements on D and D objects and their related similar technologies was performed, and 2) the technology items applicable to the domestic market were derived from the evaluation of the suitability on the domestic technology requirements. The promising technologies applicable to the domestic market were derived from the integrated evaluation of the technological factors(innovation, internationally competitive power and the difficulty of the technology development), economical factors (domestic demand and substitution effect of foreign currency) and domestically applicable factors (applicability on the industry and a ripple effect). The background of the technology development such as business applicability and the technology demonstration effect through the integrated management of the decommissioning of TRIGA reactor and the uranium conversion facility was also analyzed. 10 refs., 9 figs., 28 tabs. (Author)

  16. Evaluation of a permeable reactive barrier technology for use at Rocky Flats Environmental Technology Site (RFETS)

    International Nuclear Information System (INIS)

    Dwyer, Brian P.

    2000-01-01

    Three reactive materials were evaluated at laboratory scale to identify the optimum treatment reagent for use in a Permeable Reactive Barrier Treatment System at Rocky Flats Environmental Technology Site (RFETS). The contaminants of concern (COCS) are uranium, TCE, PCE, carbon tetrachloride, americium, and vinyl chloride. The three reactive media evaluated included high carbon steel iron filings, an iron-silica alloy in the form of a foam aggregate, and a peculiar humic acid based sorbent (Humasorb from Arctech) mixed with sand. Each material was tested in the laboratory at column scale using simulated site water. All three materials showed promise for the 903 Mound Site however, the iron filings were determined to be the least expensive media. In order to validate the laboratory results, the iron filings were further tested at a pilot scale (field columns) using actual site water. Pilot test results were similar to laboratory results; consequently, the iron filings were chosen for the fill-scale demonstration of the reactive barrier technology. Additional design parameters including saturated hydraulic conductivity, treatment residence time, and head loss across the media were also determined and provided to the design team in support of the final design. The final design was completed by the Corps of Engineers in 1997 and the system was constructed in the summer of 1998. The treatment system began fill operation in December, 1998 and despite a few problems has been operational since. Results to date are consistent with the lab and pilot scale findings, i.e., complete removal of the contaminants of concern (COCs) prior to discharge to meet RFETS cleanup requirements. Furthermore, it is fair to say at this point in time that laboratory developed design parameters for the reactive barrier technology are sufficient for fuel scale design; however,the treatment system longevity and the long-term fate of the contaminants are questions that remain unanswered. This

  17. Development of life evaluation technology for nuclear power plant components

    Energy Technology Data Exchange (ETDEWEB)

    Song, Sung Jin; Kim, Young Hwan; Shin, Hyun Jae [Sungkwunkwan Univ., Seoul (Korea, Republic of); Lee, Hyang Beom [Soongsil Univ., Seoul (Korea, Republic of); Shin, Young Kil [Kunsan National Univ., Gunsan (Korea, Republic of); Chung, Hyun Jo [Wonkwang Univ., Iksan (Korea, Republic of); Park, Ik Keun; Park, Eun Soo [Seoul National University of Technology, Seoul (Korea, Republic of)

    2001-03-15

    Retaining reliabilities of nondestructive testing is essential for the life-time maintenance of nuclear power plant. In order to Improve reliabilities of ultrasonic testing and eddy current testing, the following five subjects were carried out in this study: development of BEM analysis technique for ECT of SG tube, development of neural network technique for the intelligent analysis of ECT flaw signals of SG tubes, development of RFECT technology for the inspection of SG tube, FEM analysis of ultrasonic scattering field and evaluation of statistical reliability of PD-RR test of ultrasonic testing. As results, BEM analysis of eddy current signal, intelligent analysis of eddy current signal using neural network, and FEM analysis of remote field eddy current testing have been developed for the inspection of SG tubes. FEM analysis of ultrasonic waves in 2-dimensional media and evaluation of statistical reliability of ultrasonic testing with PD-RR test also have been carried out for the inspection of weldments. Those results can be used to Improve reliability of nondestructive testing.

  18. Development of life evaluation technology for nuclear power plant components

    International Nuclear Information System (INIS)

    Song, Sung Jin; Kim, Young Hwan; Shin, Hyun Jae; Lee, Hyang Beom; Shin, Young Kil; Chung, Hyun Jo; Park, Ik Keun; Park, Eun Soo

    2001-03-01

    Retaining reliabilities of nondestructive testing is essential for the life-time maintenance of nuclear power plant. In order to Improve reliabilities of ultrasonic testing and eddy current testing, the following five subjects were carried out in this study: development of BEM analysis technique for ECT of SG tube, development of neural network technique for the intelligent analysis of ECT flaw signals of SG tubes, development of RFECT technology for the inspection of SG tube, FEM analysis of ultrasonic scattering field and evaluation of statistical reliability of PD-RR test of ultrasonic testing. As results, BEM analysis of eddy current signal, intelligent analysis of eddy current signal using neural network, and FEM analysis of remote field eddy current testing have been developed for the inspection of SG tubes. FEM analysis of ultrasonic waves in 2-dimensional media and evaluation of statistical reliability of ultrasonic testing with PD-RR test also have been carried out for the inspection of weldments. Those results can be used to Improve reliability of nondestructive testing

  19. School version of ESTE EU

    International Nuclear Information System (INIS)

    Carny, P.; Suchon, D.; Chyly, M.; Smejkalova, E.; Fabova, V.

    2008-01-01

    ESTE EU is information system and software for radiological impacts assessment to the territory of the country in case of radiation accident inside/outside of the country .The program enables to model dispersion of radioactive clouds in small-scale and meso-scale. The system enables the user to estimate prediction of the source term (release to the atmosphere ) for any point of radiation/nuclear accident in Europe (for any point of the release, but especially for the sites of European power reactors ). The system enables to utilize results of real radiological monitoring in the process of source term estimation. Radiological impacts of release to the atmosphere are modelled and calculated across the Europe and displayed in the geographical information system (GIS). The school version of ESTE EU is intended for students of the universities which are interested in or could work in the field of emergency response, radiological and nuclear accidents, dispersion modelling, radiological impacts calculation and urgent or preventive protective measures implementation. The school version of ESTE EU is planned to be donated to specialized departments of faculties in Slovakia, Czech Republic, etc. System can be fully operated in Slovak, Czech or English language. (authors)

  20. School version of ESTE EU

    International Nuclear Information System (INIS)

    Carny, P.; Suchon, D.; Chyly, M.; Smejkalova, E.; Fabova, V.

    2009-01-01

    ESTE EU is information system and software for radiological impacts assessment to the territory of the country in case of radiation accident inside/outside of the country .The program enables to model dispersion of radioactive clouds in small-scale and meso-scale. The system enables the user to estimate prediction of the source term (release to the atmosphere ) for any point of radiation/nuclear accident in Europe (for any point of the release, but especially for the sites of European power reactors ). The system enables to utilize results of real radiological monitoring in the process of source term estimation. Radiological impacts of release to the atmosphere are modelled and calculated across the Europe and displayed in the geographical information system (GIS). The school version of ESTE EU is intended for students of the universities which are interested in or could work in the field of emergency response, radiological and nuclear accidents, dispersion modelling, radiological impacts calculation and urgent or preventive protective measures implementation. The school version of ESTE EU is planned to be donated to specialized departments of faculties in Slovakia, Czech Republic, etc. System can be fully operated in Slovak, Czech or English language. (authors)

  1. Technology development for evaluation of operational quantities in radiation protection

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jang Lyul; Chang, S. Y.; Lee, L. T.; Kim, B. H.; Chung, K. K.; Lee, J. I.; Lim, G. S.; Kim, J. S.; Nam, Y. M.; Chang, J. K.; Kim, D. Y.; Yang, J. S

    2000-03-01

    A study on the fabrication of a new personal thermo-luminescence dosimeter, which can evaluate the personal dose equivalent H{sub p}(d), has been performed. Optimum conditions for fabrication of a LiF:Mg,Cu,Na,Si TL phosphor powder has been determined and a disc type TL pellet has been fabricated from this TL powder. Another type of CaSO{sub 4}:Dy,Mo TL material has been also fabricated. These two TL materials have shown greater TL sensitivity than the foreign-made commercial TL materials. Mono-energetic fluorescence X-ray from 8.6 keV to 75 keV for use in performance testing of the developed TLDs energy response have been constructed and evaluated for the performance of the purity, air kerma, beam uniformity and distribution, and scattered fraction of X-rays. Reference neutron field of a D{sub 2}O moderated {sup 252}Cf source was characterized and the irradiation system using {sup 226}Ra and {sup 137}Cs sources was installed to construct the environmental gamma reference radiation and the low-level gamma radiation. A capability of calibration and measurement of KAERI In Vivo counting system for transuranic elements in the lung has been evaluated through the participation in the overseas intercomparison study on the In Vivo radioactivity measurement. An improvement and advancement of KAERI lung counting technology have been made by the analysis off uncertainties from the assumption of uniform radioactivity distribution in the lung, experimental determination and comparing of detection efficiency with different lung sets, and mathematical efficiency calibration of In Vivo counting system. (author)

  2. A Re-Evaluation of Mobile Communication Technology: A Theoretical Approach for Technology Evaluation in Contemporary Digital Learning

    Science.gov (United States)

    Yumurtaci, Onur

    2017-01-01

    We live in an age of continual technological development. Rapidly developing technologies have found use in nearly all aspects of life. As such, it is understandable that technology has also infiltrated the field of education. Information and Communication Technology (ICT) has provided us with the technical underpinnings for distance and lifelong…

  3. ECONOMIC EVALUATION OF CO2 SEQUESTRATION TECHNOLOGIES; SEMIANNUAL

    International Nuclear Information System (INIS)

    Bert R. Bock; Richard G. Rhudy; David E. Nichols

    2001-01-01

    In order to plan for potential CO(sub 2) mitigation mandates, utilities need better information on CO(sub 2) mitigation options, especially carbon sequestration options that involve non-utility operations. One of the major difficulties in evaluating CO(sub 2) sequestration technologies and practices, both geologic storage of captured CO(sub 2) and storage in biological sinks, is obtaining consistent, transparent, accurate, and comparable economics. This project is comparing the economics of major technologies and practices under development for CO(sub 2) sequestration, including captured CO(sub 2) storage options such as active oil reservoirs, depleted oil and gas reservoirs, deep aquifers, coal beds, and oceans, as well as the enhancement of biological sinks such as forests and croplands. An international group of experts has been assembled to compare on a consistent basis the economics of this diverse array of CO(sub 2) sequestration options. Designs and data collection are nearly complete for each of the CO(sub 2) sequestration options being compared. Initial spreadsheet development has begun on concepts involving storage of captured CO(sub 2). No significant problems have been encountered, but some additional outside expertise will be accessed to supplement the team's expertise in the areas of life cycle analysis, oil and gas exploration and production, and comparing CO(sub 2) sequestration options that differ in timing and permanence of CO(sub 2) sequestration. Plans for the next reporting period are to complete data collection and a first approximation of the spreadsheet. We expect to complete this project on time and on budget

  4. Review and evaluation of alternative chemical disposal technologies

    National Research Council Canada - National Science Library

    National Research Council Staff; Commission on Engineering and Technical Systems; Division on Engineering and Physical Sciences; National Research Council; National Academy of Sciences

    ... in comparison to the Army's baseline incineration system. The volume's main finding was that no alternative technology was preferable to incineration but that work should continue on the neutralization technologies under Army consideration...

  5. Evaluation of warm mix asphalt technology in flexible pavements.

    Science.gov (United States)

    2009-09-01

    The primary goal of this research project is to quantify the performance of field produced and placed mixtures that utilize WMA technology and develop a framework for design, construction, and implementation of this technology in Louisiana. This rese...

  6. Review and Evaluation of Alternative Chemical Disposal Technologies

    National Research Council Canada - National Science Library

    2000-01-01

    ... in comparison to the Army's baseline incineration system. The volume's main finding was that no alternative technology was preferable to incineration but that work should continue on the neutralization technologies under Army consideration...

  7. Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part B, Dismantlement, Remedial action

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

  8. Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part C, Robotics/automation, Waste management

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

  9. Enhanced Geothermal Systems (EGS) Well Construction Technology Evaluation Report

    Energy Technology Data Exchange (ETDEWEB)

    Polsky, Yarom [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Capuano, Louis [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Finger, John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Huh, Michael [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Knudsen, Steve [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Chip, A.J. Mansure [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Raymond, David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Swanson, Robert [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2008-12-01

    This report provides an assessment of well construction technology for EGS with two primary objectives: 1. Determining the ability of existing technologies to develop EGS wells. 2. Identifying critical well construction research lines and development technologies that are likely to enhance prospects for EGS viability and improve overall economics.

  10. J.R. SIMPLOT EX-SITU BIOREMEDIATION TECHNOLOGY FOR TREATMENT OF TNT-CONTAMINATED SOILS - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report summarizes the findings of the second evaluation of the J.R. Simplot Ex-situ Bioremediation Technology also known as the Simplot Anaerobic Bioremediation (SABRE™) process. This technology was developed by the J.R. Simplot Company to biologically degrade nitroaromatic...

  11. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part A, Remedial action

    International Nuclear Information System (INIS)

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part A of Volume 3 and contains the Remedial Action section

  12. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part B, Characterization; robotics/automation

    International Nuclear Information System (INIS)

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate theses problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part B of Volume 3 and contains the Characterization and Robotics/Automation sections

  13. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part A, Remedial action

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part A of Volume 3 and contains the Remedial Action section.

  14. AcEST: BP920339 [AcEST

    Lifescience Database Archive (English)

    Full Text Available t (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report ... short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  15. AcEST: BP914811 [AcEST

    Lifescience Database Archive (English)

    Full Text Available t (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report ... short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  16. AcEST: BP915821 [AcEST

    Lifescience Database Archive (English)

    Full Text Available (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report -...short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  17. AcEST: BP921019 [AcEST

    Lifescience Database Archive (English)

    Full Text Available Swiss-Prot (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value ...uence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  18. AcEST: BP917893 [AcEST

    Lifescience Database Archive (English)

    Full Text Available Prot (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Repo...too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  19. AcEST: DK945353 [AcEST

    Lifescience Database Archive (English)

    Full Text Available t (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value... short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  20. AcEST: BP912385 [AcEST

    Lifescience Database Archive (English)

    Full Text Available wiss-Prot (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value -...ence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  1. AcEST: BP921297 [AcEST

    Lifescience Database Archive (English)

    Full Text Available blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrE...t.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  2. AcEST: BP917667 [AcEST

    Lifescience Database Archive (English)

    Full Text Available blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrE...t.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  3. AcEST: DK944134 [AcEST

    Lifescience Database Archive (English)

    Full Text Available t (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value... short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  4. AcEST: BP917876 [AcEST

    Lifescience Database Archive (English)

    Full Text Available Prot (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Repo...too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  5. AcEST: DK944578 [AcEST

    Lifescience Database Archive (English)

    Full Text Available iss-Prot (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value...nce too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  6. AcEST: BP921482 [AcEST

    Lifescience Database Archive (English)

    Full Text Available ot (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report...o short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  7. AcEST: BP920666 [AcEST

    Lifescience Database Archive (English)

    Full Text Available (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report -...short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  8. Initial ACTR retrieval technology evaluation test material recommendations

    International Nuclear Information System (INIS)

    Powell, M.R.

    1996-04-01

    Millions of gallons of radiaoctive waste are contained in underground storage tanks at Hanford (SE Washington). Techniques for retrieving much of this waste from the storage tanks have been developed. Current baseline approach is to use sluice jets for single-shell tanks and mixer pumps for double-shell tanks. The Acquire Commercial Technology for Retrieval (ACTR) effort was initiated to identify potential improvements in or alternatives to the baseline waste retrieval methods. Communications with a variety of vendors are underway to identify improved methods that can be implemented at Hanford with little or no additional development. Commercially available retrieval methods will be evaluated by a combination of testing and system-level cost estimation. Current progress toward developing waste simulants for testing ACTR candidate methods is reported; the simulants are designed to model 4 different types of tank waste. Simulant recipes are given for wet sludge, hardpan/dried sludge,hard saltcake, and soft saltcake. Comparisons of the waste and simulant properties are documented in this report

  9. Space Qualified Non-Destructive Evaluation and Structural Health Monitoring Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — NextGen Aeronautics is proposing an innovative space qualified non-destructive evaluation and health monitoring technology. The technology is built on concepts...

  10. Trimming and clustering sugarcane ESTs

    Directory of Open Access Journals (Sweden)

    Guilherme P. Telles

    2001-12-01

    Full Text Available The original clustering procedure adopted in the Sugarcane Expressed Sequence Tag project (SUCEST had many problems, for instance too many clusters, the presence of ribosomal sequences, etc. We therefore redesigned the clustering procedure entirely, including a much more careful initial trimming of the reads. In this paper the new trimming and clustering strategies are described in detail and we give the new official figures for the project, 237,954 expressed sequence tags and 43,141 clusters.O método de clustering adotado no Projeto SUCEST (Sugarcane EST Project tinha vários problemas (muitos clusters, presença de seqüências de ribossomo etc. Nós assumimos a tarefa de reprojetar todo o processo de clustering, propondo uma "limpeza" inicial mais cuidadosa das seqüências. Neste artigo as estratégias de limpeza das seqüências e de clustering são descritas em detalhe, incluindo os números oficiais do projeto (237,954 ESTs e 43,141 clusters.

  11. Coal gasification systems engineering and analysis. Appendix G: Commercial design and technology evaluation

    Science.gov (United States)

    1980-01-01

    A technology evaluation of five coal gasifier systems (Koppers-Totzek, Texaco, Babcock and Wilcox, Lurgi and BGC/Lurgi) and procedures and criteria for evaluating competitive commercial coal gasification designs is presented. The technology evaluation is based upon the plant designs and cost estimates developed by the BDM-Mittelhauser team.

  12. Seismic risk evaluation within the technology neutral framework

    International Nuclear Information System (INIS)

    Johnson, B.C.; Apostolakis, G.E.

    2012-01-01

    Highlights: ► We examine seismic risk within the Technology Neutral Framework (TNF). ► We find that the risk goals in the TNF to be stringent compared with current goals. ► We note that the current fleet reactors would not meet the TNF goals. ► We recommend that an initiating frequency cutoff of 10 −5 per year be use in evaluating seismic risk. - Abstract: The NRC Office of Nuclear Regulatory Research has proposed a risk-informed and performance-based licensing process that is referred to as the technology neutral framework (TNF). In the TNF, licensing basis events (LBEs), determined using probabilistic risk assessment methods, take the place of design basis accidents. These LBEs are constructed by grouping together accident sequences with similar phenomenology. All event sequences with a mean frequency greater than 10 −7 per reactor year are to be considered as part of the licensing basis. Imposing such a limit would require that earthquakes with a mean return period of ten million years be considered as part of the licensing basis. It is difficult to get seismic hazards (i.e., ground accelerations) from expert seismologists at such low frequencies. This is because it is difficult or impossible to confidently say what the seismic hazard might be at these extremely low frequencies. A linear extrapolation in log-log space of hazard curves at the Clinton site down to 10 −7 per year leads to a peak ground acceleration of about 4.5 g. A Weibull distribution is also used to fit the curve leading to a peak ground acceleration of about 2.6 g. These extrapolations demonstrate the extreme nature of rare earthquakes. Even when seismic isolation is implemented, the TNF goal is not met. The problem appears to be that there is no limit on initiating event frequency in the TNF. Demonstrating that a design meets the goals of the TNF would be nearly impossible. A frequency limit for earthquakes could be imposed at a frequency of about 10 −5 per year to focus on

  13. Integrating Human Factors Engineering and Information Processing Approaches to Facilitate Evaluations in Criminal Justice Technology Research.

    Science.gov (United States)

    Salvemini, Anthony V; Piza, Eric L; Carter, Jeremy G; Grommon, Eric L; Merritt, Nancy

    2015-06-01

    Evaluations are routinely conducted by government agencies and research organizations to assess the effectiveness of technology in criminal justice. Interdisciplinary research methods are salient to this effort. Technology evaluations are faced with a number of challenges including (1) the need to facilitate effective communication between social science researchers, technology specialists, and practitioners, (2) the need to better understand procedural and contextual aspects of a given technology, and (3) the need to generate findings that can be readily used for decision making and policy recommendations. Process and outcome evaluations of technology can be enhanced by integrating concepts from human factors engineering and information processing. This systemic approach, which focuses on the interaction between humans, technology, and information, enables researchers to better assess how a given technology is used in practice. Examples are drawn from complex technologies currently deployed within the criminal justice system where traditional evaluations have primarily focused on outcome metrics. Although this evidence-based approach has significant value, it is vulnerable to fully account for human and structural complexities that compose technology operations. Guiding principles for technology evaluations are described for identifying and defining key study metrics, facilitating communication within an interdisciplinary research team, and for understanding the interaction between users, technology, and information. The approach posited here can also enable researchers to better assess factors that may facilitate or degrade the operational impact of the technology and answer fundamental questions concerning whether the technology works as intended, at what level, and cost. © The Author(s) 2015.

  14. Evaluation of Representative Smart Grid Investment Project Technologies: Demand Response

    Energy Technology Data Exchange (ETDEWEB)

    Fuller, Jason C.; Prakash Kumar, Nirupama; Bonebrake, Christopher A.

    2012-02-14

    This document is one of a series of reports estimating the benefits of deploying technologies similar to those implemented on the Smart Grid Investment Grant (SGIG) projects. Four technical reports cover the various types of technologies deployed in the SGIG projects, distribution automation, demand response, energy storage, and renewables integration. A fifth report in the series examines the benefits of deploying these technologies on a national level. This technical report examines the impacts of a limited number of demand response technologies and implementations deployed in the SGIG projects.

  15. Evaluation of spacecraft technology programs (effects on communication satellite business ventures), volume 2

    Science.gov (United States)

    Greenburg, J. S.; Kaplan, M.; Fishman, J.; Hopkins, C.

    1985-01-01

    The computational procedures used in the evaluation of spacecraft technology programs that impact upon commercial communication satellite operations are discussed. Computer programs and data bases are described.

  16. AcEST: BP917487 [AcEST

    Lifescience Database Archive (English)

    Full Text Available short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link... to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  17. AcEST: BP920443 [AcEST

    Lifescience Database Archive (English)

    Full Text Available op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (r...elease 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  18. AcEST: DK946187 [AcEST

    Lifescience Database Archive (English)

    Full Text Available n length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast o...p. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  19. AcEST: DK946967 [AcEST

    Lifescience Database Archive (English)

    Full Text Available sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL ...(release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  20. AcEST: BP920319 [AcEST

    Lifescience Database Archive (English)

    Full Text Available - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to BlastX Result ...: TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  1. AcEST: DK946983 [AcEST

    Lifescience Database Archive (English)

    Full Text Available quence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ... ... Swiss-Prot (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-val...ue - Report - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Se

  2. AcEST: DK946589 [AcEST

    Lifescience Database Archive (English)

    Full Text Available inition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to BlastX Result : TrEM...BL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  3. AcEST: DK947324 [AcEST

    Lifescience Database Archive (English)

    Full Text Available ast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value... - Report - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  4. AcEST: DK946752 [AcEST

    Lifescience Database Archive (English)

    Full Text Available uence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value -... Report - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  5. AcEST: DK944187 [AcEST

    Lifescience Database Archive (English)

    Full Text Available ort.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - Tr...EMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  6. AcEST: BP916918 [AcEST

    Lifescience Database Archive (English)

    Full Text Available t.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to B...lastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  7. AcEST: BP912848 [AcEST

    Lifescience Database Archive (English)

    Full Text Available too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) L...ink to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  8. AcEST: BP920622 [AcEST

    Lifescience Database Archive (English)

    Full Text Available Definition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to BlastX Result : ...TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  9. AcEST: DK947104 [AcEST

    Lifescience Database Archive (English)

    Full Text Available e too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Rep...ort - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  10. AcEST: BP915873 [AcEST

    Lifescience Database Archive (English)

    Full Text Available uence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (release 3...9.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  11. AcEST: BP919248 [AcEST

    Lifescience Database Archive (English)

    Full Text Available t_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to BlastX Res...ult : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  12. AcEST: DK945751 [AcEST

    Lifescience Database Archive (English)

    Full Text Available p. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value... - Report - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  13. AcEST: BP920681 [AcEST

    Lifescience Database Archive (English)

    Full Text Available - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to BlastX Result :... TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  14. AcEST: DK944823 [AcEST

    Lifescience Database Archive (English)

    Full Text Available hort.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - T...rEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  15. AcEST: BP916868 [AcEST

    Lifescience Database Archive (English)

    Full Text Available . Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (rele...ase 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  16. AcEST: BP912655 [AcEST

    Lifescience Database Archive (English)

    Full Text Available t op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (...release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  17. AcEST: BP916218 [AcEST

    Lifescience Database Archive (English)

    Full Text Available ion - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (...No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  18. AcEST: BP919625 [AcEST

    Lifescience Database Archive (English)

    Full Text Available ition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL... (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  19. AcEST: DK947351 [AcEST

    Lifescience Database Archive (English)

    Full Text Available op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value... - Report - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  20. AcEST: DK944996 [AcEST

    Lifescience Database Archive (English)

    Full Text Available equence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value... - Report - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  1. AcEST: BP914408 [AcEST

    Lifescience Database Archive (English)

    Full Text Available ) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to Bla...stX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  2. AcEST: DK945778 [AcEST

    Lifescience Database Archive (English)

    Full Text Available hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to BlastX R...esult : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  3. AcEST: BP921026 [AcEST

    Lifescience Database Archive (English)

    Full Text Available inition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to BlastX Result : TrEM...BL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  4. AcEST: DK945375 [AcEST

    Lifescience Database Archive (English)

    Full Text Available quence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ... ... Swiss-Prot (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-val...ue - Report - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Se

  5. AcEST: BP912152 [AcEST

    Lifescience Database Archive (English)

    Full Text Available efinition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to BlastX Result : Tr...EMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  6. AcEST: DK945372 [AcEST

    Lifescience Database Archive (English)

    Full Text Available too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Repor...t - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  7. AcEST: BP920010 [AcEST

    Lifescience Database Archive (English)

    Full Text Available sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to Blas...tX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  8. AcEST: DK947396 [AcEST

    Lifescience Database Archive (English)

    Full Text Available .) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMB...L (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  9. AcEST: BP912800 [AcEST

    Lifescience Database Archive (English)

    Full Text Available short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link... to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  10. AcEST: BP916111 [AcEST

    Lifescience Database Archive (English)

    Full Text Available n length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast o...p. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  11. AcEST: DK944574 [AcEST

    Lifescience Database Archive (English)

    Full Text Available ence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - ...Report - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  12. AcEST: DK946325 [AcEST

    Lifescience Database Archive (English)

    Full Text Available n length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast o...p. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  13. AcEST: BP919873 [AcEST

    Lifescience Database Archive (English)

    Full Text Available ast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL... (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  14. AcEST: DK947128 [AcEST

    Lifescience Database Archive (English)

    Full Text Available oo short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report... - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  15. AcEST: DK945208 [AcEST

    Lifescience Database Archive (English)

    Full Text Available ion - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (...No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  16. AcEST: BP916007 [AcEST

    Lifescience Database Archive (English)

    Full Text Available hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to BlastX R...esult : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  17. AcEST: DK945758 [AcEST

    Lifescience Database Archive (English)

    Full Text Available short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report -... TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  18. AcEST: BP920016 [AcEST

    Lifescience Database Archive (English)

    Full Text Available uence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (release 3...9.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  19. AcEST: BP920957 [AcEST

    Lifescience Database Archive (English)

    Full Text Available hort.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link t...o BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  20. AcEST: DK944158 [AcEST

    Lifescience Database Archive (English)

    Full Text Available o short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report ...- TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  1. AcEST: DK945105 [AcEST

    Lifescience Database Archive (English)

    Full Text Available uence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value -... Report - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  2. AcEST: BP915916 [AcEST

    Lifescience Database Archive (English)

    Full Text Available p. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (rel...ease 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  3. AcEST: BP917898 [AcEST

    Lifescience Database Archive (English)

    Full Text Available s-Prot (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Re...e too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  4. AcEST: DK947750 [AcEST

    Lifescience Database Archive (English)

    Full Text Available ) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL... (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  5. AcEST: DK943962 [AcEST

    Lifescience Database Archive (English)

    Full Text Available oo short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report... - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  6. AcEST: BP916863 [AcEST

    Lifescience Database Archive (English)

    Full Text Available d - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to BlastX Result... : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  7. AcEST: BP914639 [AcEST

    Lifescience Database Archive (English)

    Full Text Available too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) ...Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  8. AcEST: BP911605 [AcEST

    Lifescience Database Archive (English)

    Full Text Available finition - Align length - Score (bit) - E-value - Report - TrEMBL (release 39.9) Link to BlastX Result : TrE...MBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  9. AcEST: DK945775 [AcEST

    Lifescience Database Archive (English)

    Full Text Available oo short.) sp_hit_id - Definition - Align length - Score (bit) - E-value - Report... - TrEMBL (release 39.9) Link to BlastX Result : TrEMBL (No blast op. Sequence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  10. Evaluating Satellite and Supercomputing Technologies for Improved Coastal Ecosystem Assessments

    Science.gov (United States)

    McCarthy, Matthew James

    Water quality and wetlands represent two vital elements of a healthy coastal ecosystem. Both experienced substantial declines in the U.S. during the 20th century. Overall coastal wetland cover decreased over 50% in the 20th century due to coastal development and water pollution. Management and legislative efforts have successfully addressed some of the problems and threats, but recent research indicates that the diffuse impacts of climate change and non-point source pollution may be the primary drivers of current and future water-quality and wetland stress. In order to respond to these pervasive threats, traditional management approaches need to adopt modern technological tools for more synoptic, frequent and fine-scale monitoring and assessment. In this dissertation, I explored some of the applications possible with new, commercial satellite imagery to better assess the status of coastal ecosystems. Large-scale land-cover change influences the quality of adjacent coastal water. Satellite imagery has been used to derive land-cover maps since the 1960's. It provides multiple data points with which to evaluate the effects of land-cover change on water quality. The objective of the first chapter of this research was to determine how 40 years of land-cover change in the Tampa Bay watershed (6,500 km2) may have affected turbidity and chlorophyll concentration - two proxies for coastal water quality. Land cover classes were evaluated along with precipitation and wind stress as explanatory variables. Results varied between analyses for the entire estuary and those of segments within the bay. Changes in developed land percent cover best explained the turbidity and chlorophyll-concentration time series for the entire bay (R2 > 0.75, p Ocean-color satellite imagery was used to derive proxies for coastal water with near-daily satellite observations since 2000. The goal of chapter two was to identify drivers of turbidity variability for 11 National Estuary Program water bodies

  11. Evaluating the Effect of Information Technology in Small Businesses

    Science.gov (United States)

    Newman, Peter

    2010-01-01

    Information technology (IT) has become a strategic vehicle for small businesses to achieve and sustain their competitive advantage. Prior research has suggested that information technology plays an important role in the decision-making process. The purpose of this study is to examine the relationship between organizational IT performance and…

  12. A Survey on Evaluation Factors for Business Process Management Technology

    NARCIS (Netherlands)

    Mutschler, B.B.; Reichert, M.U.

    2006-01-01

    Estimating the value of business process management (BPM) technology is a difficult task to accomplish. Computerized business processes have a strong impact on an organization, and BPM projects have a long-term cost amortization. To systematically analyze BPM technology from an economic-driven

  13. Emergy Evaluation of Different Straw Reuse Technologies in Northeast China

    Directory of Open Access Journals (Sweden)

    Xiaoxian Zhang

    2015-08-01

    Full Text Available Open burning of straw in China has degraded agricultural environments and has become a contributor to air pollution. Development of efficient straw-reuse technologies not only can yield economic benefits but also can protect the environment and can provide greater benefit to society. Thus, the overall benefits of straw-reuse technologies must be considered when making regional development planning and enterprise technology decisions. In addition, agricultural areas in China cross several climatic zones and have different weather characteristics and cultural conditions. In the present study, we assessed five types of straw-reuse technologies (straw-biogas production, -briquetting, -based power generation, -gasification, and -bioethanol production, using emergy analysis, in northeast China. Within each type, five individual cases were investigated, and the highest-performing cases were used for comparison across technologies. Emergy indices for comprehensive benefits for each category, namely, EYR, ELR, and ESI were calculated. Calculated indices suggest that straw-briquetting and -biogas production are the most beneficial technologies in terms of economy, environmental impact, and sustainability compared to straw-based power generation, -gasification, and -bioethanol production technologies. These two technologies can thus be considered the most suitable for straw reuse in China.

  14. Technological Innovations and Banking in Ghana: An Evaluation of ...

    African Journals Online (AJOL)

    In Sub-Saharan Africa, developments in information and communication technology are radically changing the way business is done. These developments in technology have resulted in new delivery channels for banking products and services such as Automated Teller Machines (ATMs), Telephone Banking, PC-Banking, ...

  15. Standardized and Repeatable Technology Evaluation for Cybersecurity Acquisition

    Science.gov (United States)

    2017-02-01

    financial benefit for adopting a cybersecurity technology. 2.2 TECHNOLOGY SELECTION Often organizations will adopt frameworks (e.g., NIST, ISO - 27000 , or...security managers. Many organizations use the NIST1, ISO -270002, or COBIT frameworks3, but for smaller organizations, these frameworks can be overly

  16. Evaluating Technology to Prevent Academic Integrity Violations in Online Environments

    Science.gov (United States)

    Brown, Victoria

    2018-01-01

    Protection of academic integrity in online environments can be challenging. Understanding how the technology works and concerns about each of the methods for monitoring online interactions can assist in the selection of the best proctoring tools. Depending on the content, the type of assessment and the comfort level with the technology, a…

  17. Economic evaluation of three on-station fish farming technologies ...

    African Journals Online (AJOL)

    While the technolo-gies were considered to be socially desirable that could ensure efficiency in use of resources, screening on-station was germane in technology transfer. Undiscounted profit, rate of return, return on annual operation cost, benefit-cost ratio, return to management, and land were adopted as indicators for ...

  18. Emerging technologies in healthcare: navigating risks, evaluating rewards.

    Science.gov (United States)

    McGrady, Elizabeth; Conger, Sue; Blanke, Sandra; Landry, Brett J L

    2010-01-01

    The purpose of this prescriptive research is to help decision makers become better informed about three technologies emerging in the healthcare arena by providing a basic description of the technology and describing their current applications, future healthcare deployment, potential risks, and related managerial issues. Two of the technologies, radio frequency identification (RFID) and global positioning systems (GPS), are currently available to healthcare organizations and appear capable of decreasing cost but may require significant initial investment and have disruptive potential. The third technology, nanotechnology, has limited current use but may revolutionize both the delivery of medicine and hospital infrastructure management. With cautious attention to managerial issues and meticulous attention to implementation details, healthcare organizations that can successfully navigate the coming technologically driven paradigm shifts will emerge more resilient organizations.

  19. Ensaio tecnológico e sensorial de soja [Glycine max (L. Merrill] enlatada em estádios verdes e no estádio da maturação de colheita Technological and sensorial assay of soybean [Glycine max (L. Merrill] canned at green stages and at harvest maturation stage

    Directory of Open Access Journals (Sweden)

    M.F.P BARCELOS

    1999-01-01

    Full Text Available Foi estudada a viabilidade de consumo da cultivar de soja IAC PL-1 enlatada como grão verde e sua melhor época de colheita para enlatamento. Para tanto procederam-se cinco colheitas a partir do 48º dia após a floração (DAF até a extinção da coloração verde. O processamento iniciou-se pelo branqueamento das vagens, debulha e enlatamento. Aos cinco lotes obtidos adicionou-se um sexto lote para estudar o efeito do armazenamento. Para qualificar os seis lotes de grãos enlatados foram efetuadas medidas de peso, cor, textura e características do líquido de enlatamento. Foram realizados estudos das propriedades sensoriais dos grãos enlatados para dimensionar a aceitação pela degustação e aparência. O enlatamento foi otimizado para 121ºC com tempo de esterilização em torno de 4 minutos. A maturidade fisiológica dos grãos ocorreu entre o 61º ao 64º DAF. O processo térmico conservou a cor verde dos grãos enlatados e não induziu perda expressiva da massa dos grãos; a textura firme dos grãos aumentou com a maturação. Os provadores demonstraram boa aceitação dos produtos e não ocorreu preferência em relação aos estádios de maturação. O trabalho conclui que grãos verdes de soja IAC PL-1 proporcionam enlatados com boas características técnicas e gustativas. Foi observado que grãos colhidos no ponto convencional de maturação, armazenados e enlatados obtiveram boa aceitação gustativa, concluindo-se que a cultivar IAC PL-1 é também adequada para o consumo e enlatada após o armazenamento.It was investigated the consumption possibility of the soybean cultivar IAC PL-1 canned as green grain and its best harvest time for canning. Five harvests were processed from the 48th day after flowering (DAF until extinction of the green coloration. The canning procedure started by pod bleaching, dehulling and canning. To the five lots obtained, a sixth lot was added to study the effect of storage. To qualify the six lots of

  20. A New Framework for Evaluating the Functional Capabilities of Intra-Enterprise Application Integration Technologies

    Directory of Open Access Journals (Sweden)

    Hossein Moradi

    2010-10-01

    Full Text Available Enterprise Application Integration (EAI technologies facilitate the sharing of information and business processes of interrelated information systems in order to achieve the target integrated systems. Different EAI solutions and technologies provide various capabilities which lead to the complexity of their evaluation process. To reduce this complexity, appropriate tools for evaluating the functional capabilities of EAI technologies are required. This paper proposes a new framework for evaluating the functional capabilities of EAI technologies, which simplify the process of evaluating the functional capabilities of intra-enterprise integration technologies and solutions.The proposed framework for evaluating the EAI technologies was enhanced using the structural and conceptual aspects of previous frameworks. It offers a new schema for which various EAI technologies are categorized in different classes and are evaluated based on their supporting level for functional integration capabilities’ criteria.The new framework offers two lists containing integration technologies and their associated classifications, and functional capabilities of integration technologies. The proposed framework is a novel one which can be used by information system experts for evaluation and comparison purposes of various integration technologies.

  1. ESTE EMO and ESTE EBO - emergency response system for NPP Mochovce and NPP Bohunice V-2

    International Nuclear Information System (INIS)

    Caeny, P.; Chyly, M.; Suchon, D.; Smejkalova, E.; Fabova, V.; Mancikova, M.; Muller, P.

    2009-01-01

    Programs ESTE EMO and ESTE EBO are emergency response systems that help the crisis staff of the NPP in assessing the source term (predicted possible release of radionuclides to the atmosphere ), in assessing the urgent protective measures and sectors under threat, in assessing real release (symptoms of release really detected and observed), in calculating radiological impacts of real release, averted or avertable doses, potential doses and doses during transport or evacuation on specified routes. Both systems serve as instruments in case of severe accident (DBA or BDBA) at NPP Mochovce or NPP Bohunice, accidents with threat of release of radioactivity to the atmosphere. Systems are implemented at emergency centre of Mochovce NPP and Bohunice NPP and connected online to the sources of technological and radiological data from the reactor, primary circuit, confinement, secondary circuit, ventilation stack, from the area of NPP (TDS 1) and from the emergency planning zone (TDS 11). Systems are connected online to the sources of meteorological data, too. (authors)

  2. ESTE EMO and ESTE EBO - emergency response system for NPP Mochovce and NPP Bohunice V-2

    International Nuclear Information System (INIS)

    Caeny, P.; Chyly, M.; Suchon, D.; Smejkalova, E.; Fabova, V.; Mancikova, M.; Muller, P.

    2008-01-01

    Programs ESTE EMO and ESTE EBO are emergency response systems that help the crisis staff of the NPP in assessing the source term (predicted possible release of radionuclides to the atmosphere ), in assessing the urgent protective measures and sectors under threat, in assessing real release (symptoms of release really detected and observed), in calculating radiological impacts of real release, averted or avertable doses, potential doses and doses during transport or evacuation on specified routes. Both systems serve as instruments in case of severe accident (DBA or BDBA) at NPP Mochovce or NPP Bohunice, accidents with threat of release of radioactivity to the atmosphere. Systems are implemented at emergency centre of Mochovce NPP and Bohunice NPP and connected online to the sources of technological and radiological data from the reactor, primary circuit, confinement, secondary circuit, ventilation stack, from the area of NPP (TDS 1) and from the emergency planning zone (TDS 11). Systems are connected online to the sources of meteorological data, too. (authors)

  3. AcEST: DK946291 [AcEST

    Lifescience Database Archive (English)

    Full Text Available ss-Prot (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value...ce too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  4. AcEST: DK945128 [AcEST

    Lifescience Database Archive (English)

    Full Text Available rot (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-value...oo short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  5. AcEST: DK958455 [AcEST

    Lifescience Database Archive (English)

    Full Text Available Swiss-Prot (No blast op. Sequence too short.) sp_hit_id - Definition - Align length - Score (bit) - E-valu...uence too short.) tr_hit_id - Definition - Align length - Score (bit) - E-value - Report - ...

  6. METHODS FOR EVALUATION OF COMPANIES’ INFORMATION SYSTEMS AND TECHNOLOGIES EFFICIENCY AND CONTROL IN TEACHING COURSE "INFORMATION TECHNOLOGY GOVERNANCE"

    Directory of Open Access Journals (Sweden)

    Samchynska Yaroslava

    2014-10-01

    Full Text Available The use of the information systems and technologies in economic activity is called to represent companies’ corporate principles, aims, traditions, to help in realization of the planned strategies, thanks to that the management efficiency and the cost of enterprise increases. Teaching for educational discipline «IT Governance» is directed on a study and research of these intercommunications by students of the 5th course on specialties «Computer Science», «Software Engineering» for educational level Specialist (Past Bachelor Degree, Master degree. The auditing services belong to the actual methods for evaluation of the information systems and technologies efficiency and control, which are studied according to the course «IT Governance». The article deals with the methodological basis of providing auditing services for evaluation of efficiency and control of information systems (technologies for the purpose of satisfaction of growing informational needs of companies and functional activation in their information resources. The main task of auditing services for control of information systems (information communication technologies efficiency is to evaluate independently and objectively if the information technologies provide the necessary services. The basic criteria, data ware, subject and object of audit necessary for drawing up an audit report and assurance declaring are established. The program and a detailed list of auditing procedures for evaluation of efficiency of information systems and technologies have been presented

  7. EVALUATION OF TECHNOLOGICAL INTENSITY OF EXPORTS IN THE FORESTRY SECTOR

    Directory of Open Access Journals (Sweden)

    Orlando Monteiro da Silva

    2016-04-01

    Full Text Available ABSTRACT One of the fastest growing sectors in the domestic industry is the forestry, which has contributed significantly to economic development, job creation, income taxes, putting Brazil in a prominent position in the world market. This paper analyzes the evolution of the technological intensity of 12 main products exported by the sector, from 2000 to 2011. For that, utilizes an indicator called PRODY, which allows classifying different products according to their technological intensity or income content and considers the GDP per capita of exporting countries of each product, weighted by its revealed comparative advantage. It can be seen by the results, a continuous growth in all products' technology indicators and their decomposition into income effects, comparative advantage and joint effects, allowed to verify the main causes of this growth. Products with lower PRODY values are those that presented a higher evolution during the period studied. Products of higher processing, and those from pulp and paper industry, had greater technological advances, thanks to a joint effect, while the ones of lower processing, had a technological improvement due to the increase in GDP per capita in exporting countries. Sawn wood was the standout product, being the only one who proved to be dependent of comparative advantage effect, confirming that this industry has been reinventing itself and incorporating, in fact, more technology. This study revealed the importance of technological intensification to generate comparative advantage and be able to stand against international competition.

  8. Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

    International Nuclear Information System (INIS)

    Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun

    2004-02-01

    The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds

  9. Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

    2004-02-15

    The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds.

  10. Evaluating learning and teaching technologies in further education

    Directory of Open Access Journals (Sweden)

    Ann Jones

    2000-12-01

    Full Text Available There is currently an unprecedented interest in the use of technologies for supporting teaching and learning. In post-compulsory education, the current Government's commitment to increasing access to Lifelong Learning is expressed through a number of initiatives that also affect the further education (FE sector. For example, in The Learning Age: A Renaissance for a New Britain (Stationery Office, 1998 the government outlines its proposal to expand the scale, scope and nature of both further and higher education. The Learning Age follows a number of such government papers that emphasize the importance of Information and Communication Technologies (ICTs or Information and Learning Technologies (ILTs in FE and HE.

  11. EVALUATION OF SOLIDIFICATION/STABILIZATION AS A BEST DEMONSTRATED AVAILABLE TECHNOLOGY FOR CONTAMINATED SOILS

    Science.gov (United States)

    This project involved the evaluation of solidification/stabilization technology as a BDAT for contaminated soil. Three binding agents were used on four different synthetically contaminated soils. Performance evaluation data included unconfined compressive strength (UCS) and the T...

  12. Evaluation of automated vehicle technology for transit : [summary].

    Science.gov (United States)

    2014-01-01

    Automated transportation has been portrayed in : futuristic literature since the 19th century, but : making vehicles truly autonomous has only been : possible in recent decades with advanced control : and computer technologies. Automating cars is a :...

  13. Energy technology programmes 1993-1998. Evaluation report

    Energy Technology Data Exchange (ETDEWEB)

    1999-09-01

    In the late 1980s Finland`s Ministry of Trade and Industry (KTM) initiated a series of research and development (R and D) programmes in the field of energy technology. Subsequently, in 1993, it launched a further suite of eleven Energy Technology Programmes scheduled to run over the period 1993-1998. Aimed at the development of efficient and environmentally sound energy technologies intended to be competitive in the international marketplace, the programmes sought to involve the research, industrial and public sectors in some FIM 1.2 billion of research and development activity. The technology areas spanned: Combustion and gasification techniques Bioenergy, Advanced energy systems and technologies (e.g. wind, solar energy), Fusion, Energy and environmental technology, Energy and the environment in transportation, Energy use in buildings, Energy in steel and metal production, Energy in paper and board production, District heating, Electricity distribution automation. In early 1995, the Technology Development Centre of Finland (Tekes) assumed responsibility for the funding, management and administration of the programmes. As the final year of activities began, Tekes commissioned Technopolis to assemble a team to conduct a major review of all eleven programmes over the course of 1998. The broad aim of the exercise was to review the experience of the eleven technology R and D programmes and to make suggestions for the future. In particular, the intention was to cover a number of distinct levels. Most important were the Programme and Portfolio levels. At the individual Programme level, the review was to comment on the relevance, calibre and impact of programmes, concentrating in particular on the following: Relevance - were programme and project level goals in line with Finnish interests and comparable agendas in other countries; Efficiency - how well were the programmes implemented and managed; Quality - how did the scientific and technological quality of the work

  14. Evaluation of EDAR vehicle emissions remote sensing technology.

    Science.gov (United States)

    Ropkins, Karl; DeFries, Timothy H; Pope, Francis; Green, David C; Kemper, Jim; Kishan, Sandeep; Fuller, Gary W; Li, Hu; Sidebottom, Jim; Crilley, Leigh R; Kramer, Louisa; Bloss, William J; Stewart Hager, J

    2017-12-31

    Despite much work in recent years, vehicle emissions remain a significant contributor in many areas where air quality standards are under threat. Policy-makers are actively exploring options for next generation vehicle emission control and local fleet management policies, and new monitoring technologies to aid these activities. Therefore, we report here on findings from two separate but complementary blind evaluation studies of one new-to-market real-world monitoring option, HEAT LLC's Emission Detection And Reporting system or EDAR, an above-road open path instrument that uses Differential Absorption LIDAR to provide a highly sensitive and selective measure of passing vehicle emissions. The first study, by Colorado Department of Public Health and Environment and Eastern Research Group, was a simulated exhaust gas test exercise used to investigate the instrumental accuracy of the EDAR. Here, CO, NO, CH 4 and C 3 H 8 measurements were found to exhibit high linearity, low bias, and low drift over a wide range of concentrations and vehicle speeds. Instrument accuracy was high (R 2 0.996 for CO, 0.998 for NO; 0.983 for CH 4 ; and 0.976 for C 3 H 8 ) and detection limits were 50 to 100ppm for CO, 10 to 30ppm for NO, 15 to 35ppmC for CH 4 , and, depending on vehicle speed, 100 to 400ppmC 3 for C 3 H 8 . The second study, by the Universities of Birmingham and Leeds and King's College London, used the comparison of EDAR, on-board Portable Emissions Measurement System (PEMS) and car chaser (SNIFFER) system measurements collected under real-world conditions to investigate in situ EDAR performance. Given the analytical challenges associated with aligning these very different measurements, the observed agreements (e.g. EDAR versus PEMS R 2 0.92 for CO/CO 2 ; 0.97 for NO/CO 2 ; ca. 0.82 for NO 2 /CO 2 ; and, 0.94 for PM/CO 2 ) were all highly encouraging and indicate that EDAR also provides a representative measure of vehicle emissions under real-world conditions. Copyright

  15. La parole est à vous

    CERN Multimedia

    Staff Association

    2015-01-01

    Nous avons identifié, ci-dessous, 3 grands chapitres pour lesquelles bon nombre d’entre vous se posent des questions et ont fréquemment sollicités leurs délégués, qui n’ont pas toujours pu donner de réponses : La retraite et sa préparation. L’affiliation aux régimes sécurité sociale de nos états hôtes et ses conséquences au moment de la retraite. La fiscalité en général. Le service juridique, que nous avons interrogé récemment, n’est pas toujours informé de vos interrogations et de ce fait, il n’a pas encore pu investiguer sur ces questions auprès des services compétents. Il nous a suggéré de vous interroger afin de collecter vos questions, de les synthétiser, afin de les transmettre...

  16. Empirical Evaluation of a Technology-rich Learning Environment

    OpenAIRE

    McCreary, Faith

    2001-01-01

    In the fall of 1996, the Computer Science Department at Virginia Tech initiated a joint project with a local school district, to determine how ready access to networked computing in the fifth grade would affect students. Called the PCs for Families (PCF) project, its goal was to learn what could be achieved if technology access, support, and curriculum integration could be eliminated as obstacles or constraints in the classroom and at home. A technology-rich classroom was created, with the cl...

  17. Environmental and Financial Evaluation of Passenger Vehicle Technologies in Belgium

    OpenAIRE

    Messagie, Maarten; Lebeau, Kenneth; Coosemans, Thierry; Macharis, Cathy; Mierlo, Joeri van

    2013-01-01

    Vehicles with alternative drive trains are regarded as a promising substitute for conventional cars, considering the growing concern about oil depletion and the environmental impact of our transportation system. However, “clean” technologies will only be viable when they are cost-efficient. In this paper, the environmental impacts and the financial costs of different vehicle technologies are calculated for an average Belgian driver. Environmentally friendly vehicles are compared with conventi...

  18. Evaluation on maintenance technology developed in Tokai Reprocessing Plant

    International Nuclear Information System (INIS)

    Yamamura, Osamu

    2008-01-01

    Tokai reprocessing plant (TRP) has been processing 1,140 tons of spent fuels, including 29tons of Fugen MOX fuels, since the beginning of its active operation in Sept.1977. For 30 years operation of TRP, many technological problems have been overcome to obtain the stable and reliable operation. This knowledge of maintenance technology could contribute to the safety and stable operation of Rokkasho reprocessing plant (RRP), as well as to the design and construction of the next reprocessing plant. (author)

  19. Using an Evaluability Assessment To Select Methods for Evaluating State Technology Development Programs: The Case of the Georgia Research Alliance.

    Science.gov (United States)

    Youtie, Jan; Bozeman, Barry; Shapira, Philip

    1999-01-01

    Describes an evaluability assessment of the Georgia Research Alliance (GRA), a technology development program. Presents the steps involved in conducting an evaluability assessment, including development of an understanding of the program and its stakeholders. Analyzes and compares different methods by which the GRA could be evaluated. (SLD)

  20. Science on Drupal: An evaluation of CMS Technologies

    Science.gov (United States)

    Vinay, S.; Gonzalez, A.; Pinto, A.; Pascuzzi, F.; Gerard, A.

    2011-12-01

    We conducted an extensive evaluation of various Content Management System (CMS) technologies for implementing different websites supporting interdisciplinary science data and information. We chose two products, Drupal and Bluenog/Hippo CMS, to meet our specific needs and requirements. Drupal is an open source product that is quick and easy to setup and use. It is a very mature, stable, and widely used product. It has rich functionality supported by a large and active user base and developer community. There are many plugins available that provide additional features for managing citations, map gallery, semantic search, digital repositories (fedora), scientific workflows, collaborative authoring, social networking, and other functions. All of these work very well within the Drupal framework if minimal customization is needed. We have successfully implemented Drupal for multiple projects such as: 1) the Haiti Regeneration Initiative (http://haitiregeneration.org/); 2) the Consortium on Climate Risk in the Urban Northeast (http://beta.ccrun.org/); and 3) the Africa Soils Information Service (http://africasoils.net/). We are also developing two other websites, the Côte Sud Initiative (CSI) and Emerging Infectious Diseases, using Drupal. We are testing the Drupal multi-site install for managing different websites with one install to streamline the maintenance. In addition, paid support and consultancy for Drupal website development are available at affordable prices. All of these features make Drupal very attractive for implementing state-of-the-art scientific websites that do not have complex requirements. One of our major websites, the NASA Socioeconomic Data and Applications Center (SEDAC), has a very complex set of requirements. It has to easily re-purpose content across multiple web pages and sites with different presentations. It has to serve the content via REST or similar standard interfaces so that external client applications can access content in the CMS

  1. Definition and compositions of standard wastestreams for evaluation of Buried Waste Integrated Demonstration treatment technologies

    International Nuclear Information System (INIS)

    Bates, S.O.

    1993-06-01

    The Buried Waste Integrated Demonstration (BWID) Project was organized at the Idaho National Engineering Laboratory to support research, development, demonstration, testing, and evaluation of emerging technologies that offer promising solutions to remediation of buried waste. BWID will identify emerging technologies, screen them for applicability to the identified needs, select technologies for demonstration, and then evaluate the technologies based on prescribed performance objectives. The technical objective of the project is to establish solutions to Environmental Restoration and Waste Management's technological deficiencies and improve baseline remediation systems. This report establishes a set of standard wastestream compositions that will be used by BWID to evaluate the emerging technologies. Five wastestreams are proposed that use four types of waste and a nominal case that is a homogenized combination of the four wastes. The five wastestreams will provide data on the compositional extremes and indicate the technologies' effectiveness over the complete range of expected wastestream compositions

  2. Improving NASA's technology transfer process through increased screening and evaluation in the information dissemination program

    Science.gov (United States)

    Laepple, H.

    1979-01-01

    The current status of NASA's technology transfer system can be improved if the technology transfer process is better understood. This understanding will only be gained if a detailed knowledge about factors generally influencing technology transfer is developed, and particularly those factors affecting technology transfer from government R and D agencies to industry. Secondary utilization of aerospace technology is made more difficult because it depends on a transfer process which crosses established organizational lines of authority and which is outside well understood patterns of technical applications. In the absence of a sound theory about technology transfer and because of the limited capability of government agencies to explore industry's needs, a team approach to screening and evaluation of NASA generated technologies is proposed which calls for NASA, and other organizations of the private and public sectors which influence the transfer of NASA generated technology, to participate in a screening and evaluation process to determine the commercial feasibility of a wide range of technical applications.

  3. The value of adding regional to local stakeholder involvement in evaluating the acceptability of innovative technologies

    International Nuclear Information System (INIS)

    Peterson, T.S.; McCabe, G.; Niesen, K.; Serie, P.

    1995-02-01

    Technology is urgently needed to clean up contamination by volatile organic compounds at United States Department of Energy (DOE) sites. In many cases, however, existing technology is too slow, inefficient, or expensive. The record of technology development is, in some cases, similarly disappointing. Remediation technologies developed at great expense and evaluated piecemeal over long periods have not been deployed because, in the end, the public judged them ineffective or unacceptable. The need for successful methods of remediation is too great and resources too limited to continue with ineffective technology evaluation. In order to make good decisions about which technologies to deploy, remedial project managers need to know stakeholders' requirements for the performance of proposed technologies. Expanding stakeholder involvement regionally identifies the concerns of a broad range of stakeholders at and DOE sites throughout the West -- issues that must be taken into account if technologies are to be accepted for wide deployment

  4. AcEST: DK946139 [AcEST

    Lifescience Database Archive (English)

    Full Text Available protein L33 (Fragment) OS=Trachelium caeruleum Align length 55 Score (bit) 57.0 E-value 5.0e-07 Report BLAST...|A9QC76|A9QC76_TRACE 50S ribosomal protein L33 (Fragment) OS=Trachelium caeruleum GN=rpl33 PE=3 SV=1 Length

  5. AcEST: BP915681 [AcEST

    Lifescience Database Archive (English)

    Full Text Available en 175 OS=Plasmodium falciparum (isolate Camp / Malaysia) Align length 209 Score (bit) 36.6 E-value 0.097 Re...0 9.1 >sp|P19214|EBA1_PLAFC Erythrocyte-binding antigen 175 OS=Plasmodium falciparum (isolate Camp / Malaysia

  6. AcEST: BP912989 [AcEST

    Lifescience Database Archive (English)

    Full Text Available icase polyprotein 1ab OS=Beet yellows virus (isolate Ukraine) Align length 37 Score (bit) 31.6 E-value 1.3 R...534|R1AB_BYVU Replicase polyprotein 1ab OS=Beet yellows virus (isolate Ukraine) GN=1a-1b PE=1 SV=2 Length =

  7. AcEST: DK962392 [AcEST

    Lifescience Database Archive (English)

    Full Text Available UL47 homolog OS=Varicella-zoster virus (strain Dumas) Align length 104 Score (bit) 40.4 E-value 0.007 Repor...homolog OS=Varicella-zoster virus (strain Dumas) GN=11 PE=3 SV=1 Length = 819 Score = 40.4 bits (93), Expect

  8. AcEST: BP921466 [AcEST

    Lifescience Database Archive (English)

    Full Text Available OS=Hepatitis E virus genotype 1 (isolate Human/Myanmar/HEVNE8L) Align length 19 Score (bit) 31.6 E-value 2....polyprotein pORF1 OS=Hepatitis E virus genotype 1 (isolate Human/Myanmar/HEVNE8L) GN=ORF1 PE=1 SV=1 Length =

  9. AcEST: DK963335 [AcEST

    Lifescience Database Archive (English)

    Full Text Available _HERAR Glutamyl-tRNA synthetase OS=Herminiimonas arsenicoxydans Align length 117 Score (bit) 29.6 E-value 4.... synthetase OS=Herminiimonas arsenicoxydans GN=gltX PE=3 SV=1 Length = 467 Score = 29.6 bits (65), Expect =

  10. AcEST: BP916784 [AcEST

    Lifescience Database Archive (English)

    Full Text Available B0_MARFA Pancreatic ribonuclease (Fragment) OS=Martes flavigula Align length 57 Score (bit) 34.3 E-value 3.8...ibonuclease (Fragment) OS=Martes flavigula GN=RNASE1 PE=3 SV=1 Length = 140 Score = 34.3 bits (77), Expect =

  11. Development of EST-derived markers in Dendrobium from EST of related taxa

    Directory of Open Access Journals (Sweden)

    Narisa Juejun

    2013-04-01

    Full Text Available Public databases are useful for molecular marker development. The major aim of this study was to develop expressedsequence tag (EST-derived markers in Dendrobium from available ESTs of Phalaenopsis and Dendrobium. A total of 6063sequences were screened for simple sequence repeats (SSRs and introns. Primers flanking these regions were generated andtested on genomic DNAs of Phalaenopsis and Dendrobium. Twenty-three percent of amplifiable Phalaenopsis EST-derivedmarkers were cross-genera transferable to Dendrobium. Forty-one markers from both Phalaenopsis and Dendrobium thatamplified in Dendrobium were assessed on six commercial cultivars and six wild accessions. All of them were transferableamong Dendrobium species. High polymorphism and heterozygosity were observed within wild accessions. Sixteen polymorphic markers were evaluated for linkage analysis on an F1 segregating population. Seven markers were mapped into threelinkage groups, two of which showed syntenic relationship between dendrobium and rice. This relationship will facilitatefurther quantitative trait loci (QTL mapping and comparative genomic studies of Dendrobium. Our results indicate thatPhalaenopsis EST-derived markers are valuable tools for genetic research and breeding applications in Dendrobium.

  12. An Evaluation of Wind Turbine Technology at Peterson Air Force Base

    Science.gov (United States)

    2005-03-01

    by the wind speed. Darrieus turbines are ordinarily inexpensive and are used for electricity generation and irrigation. One advantage to a...AN EVALUATION OF WIND TURBINE TECHNOLOGY...02 AN EVALUATION OF WIND TURBINE TECHNOLOGY AT PETERSON AIR FORCE BASE THESIS Presented to the Faculty Department of

  13. COLLOID POLISHING FILTER METHOD - FILTER FLOW TECHNOLOGY, INC. - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The CPFM technology is designed to remove trace to moderate levels of nontritium radionuclides and heavy metal pollutants from water. The technology uses a proprietary compound that consists of inorganic, oxide-based granules. This mixed is designed to remove heavy metals and rad...

  14. Transferability of economic evaluations of medical technologies: a new technology for orthopedic surgery

    NARCIS (Netherlands)

    Steuten, Lotte Maria Gertruda; Vallejo-Torres, Laura; Young, Terry; Buxton, Martin

    2008-01-01

    Transferring results of economic evaluations across countries or jurisdictions can potentially save scarce evaluation resources while helping to make market access and reimbursement decisions in a timely fashion. This article points out why transferring results of economic evaluations is

  15. AcEST: BP918212 [AcEST

    Lifescience Database Archive (English)

    Full Text Available protein OS=Varicella-zoster virus (strain Dumas) Align length 50 Score (bit) 29.6 E-value 7.9 Report BLASTX ...la-zoster virus (strain Dumas) GN=39 PE=3 SV=1 Length = 240 Score = 29.6 bits (65), Expect = 7.9 Identities ...e 39 membrane protein OS=Varicella-zoster... 30 7.9 >sp|P09290|UL20_VZVD Gene 39 membrane protein OS=Varicel

  16. AcEST: DK947280 [AcEST

    Lifescience Database Archive (English)

    Full Text Available omal peptide synthetase OS=Actinoplanes teichomyceticus Align length 51 Score (bit) 32.7 E-value 9.4 Report ...ase, module 4-6 OS=Actinop... 33 9.4 >tr|Q70AZ7|Q70AZ7_ACTTI Non-ribosomal peptide synthetase OS=Actinoplanes...VAMMAHQHLGLSEIKQVAGPGAAFDTLVVFENYPRPPR 3362 >tr|Q6ZZJ4|Q6ZZJ4_ACTTI Peptide synthetase, module 4-6 OS=Actinoplanes

  17. Evaluation of solar electric propulsion technologies for discovery class missions

    Science.gov (United States)

    Oh, David Y.

    2005-01-01

    A detailed study examines the potential benefits that advanced electric propulsion (EP) technologies offer to the cost-capped missions in NASA's Discovery program. The study looks at potential cost and performance benefits provided by three EP technologies that are currently in development: NASA's Evolutionary Xenon Thruster (NEXT), an Enhanced NSTAR system, and a Low Power Hall effect thruster. These systems are analyzed on three straw man Discovery class missions and their performance is compared to a state of the art system using the NSTAR ion thruster. An electric propulsion subsystem cost model is used to conduct a cost-benefit analysis for each option. The results show that each proposed technology offers a different degree of performance and/or cost benefit for Discovery class missions.

  18. Evaluation of the efficiency of alternative enzyme production technologies

    DEFF Research Database (Denmark)

    Albæk, Mads Orla

    Enzymes are used in an increasing number of industries. The application of enzymes is extending into the production of lignocellulosic ethanol in processes that economically can compete with fossil fuels. Since lignocellulosic ethanol is based on renewable resources it will have a positive impact...... production of cellulases and hemi-cellulases. The aim of the thesiswas to use modeling tools to identify alternative technologies that have higher energy or raw material efficiency than the current technology. The enzyme production by T. reesei was conducted as an aerobic fed-batch fermentation. The process...... of the uncertainty and sensitivity of the model indicated the biological parameters to be responsible for most of the model uncertainty. A number of alternative fermentation technologies for enzyme production were identified in the open literature. Their mass transfer capabilities and their energy efficiencies were...

  19. [Evaluation of new technologies PET/CT nuclear imaging].

    Science.gov (United States)

    Giraldes, Maria Rosário

    2010-01-01

    Nuclear imaging has used initially anatomic and volumetric technologies as CT or MRI. In recent years new dimensions of non invasive studies, as PET, have shown a higher utility in the effectiveness of the treatment. The evaluation of need must be done according to a principle of Horizontal Equity, equal treatment for equal need and of a principle of Vertical Equity, Different treatment, at regional level, according to each hospital level. The evaluation of need has been made according to the Potential Demand by Potential User Groups: diabetes, type 2, (50 years and more); screening colorectal (50 years and more); morbidity by cancer; surgery of lung cancer; cardiology; heart surgery; acute chest pain in the emergency department. In a Macro Perspective need has been evaluated using the Population Estimations for 2007, at municipality level. Relatively to Lisbon and Porto data at locality level has been used, from the 2001 Census. According to Campos, J.R. (2007), in 2006, it existed 1 PET by 1 million inhabitants and after that date 2 more were created (Quadrantes and Hospital ad Luz), belonging to the private sector. Mores 15 PET are needed in the NHS, 1 PET for about 504128 inhabitants. According to The Potential Demand perspective 18 new PET are needed, 15 from the public sector. The private sector will cover progressively the demand. Dorado and Albertino (2002), in Spain, mention that the introduction of this new technique in our Health System must be done slowly due to the cost and complexity. In Portugal exists already 6 PET and this applies also. As a first priority the intervention in Oncology in the IPO (Coimbra). A priority must be given to the University Hospitals of Santa Maria and São João. The Central Hospitals of Viseu and VilaReal/Régua must have also 1 PET. A priority must be given to the interior in order to avoid transports of patients and families. In fourth place the HC Central Lisbon must have also 1 PET, which will go to the New Hospital

  20. A methodology for evaluating ''new'' technologies in nuclear power plants

    International Nuclear Information System (INIS)

    Korsah, K.; Clark, R.L.; Holcomb, D.E.

    1994-01-01

    As obsolescence and spare parts issues drive nuclear power plants to upgrade with new technology (such as optical fiber communication systems), the ability of the new technology to withstand stressors present where it is installed needs to be determined. In particular, new standards may be required to address qualification criteria and their application to the nuclear power plants of tomorrow. This paper discusses the failure modes and age-related degradation mechanisms of fiber optic communication systems, and suggests a methodology for identifying when accelerated aging should be performed during qualification testing

  1. Evaluating Instructor Technology Integration in Community and Technical Colleges: A Performance Evaluation Matrix

    Science.gov (United States)

    Del Favero, Marietta; Hinson, Janice M.

    2007-01-01

    The press for implementing technology based instructional delivery systems in community and technical colleges is well documented. Yet faculty face numerous challenges in integrating technology into instruction (AL-Bataineh & Brooks, 2003; Groves & Zemel, 2000; Khoury, 1997). Stimulating faculty ownership in technology, diffusion of technology use…

  2. Evaluation of technology transferring: The experiences of the first Navy Domestic Technology Transfair. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1989-12-31

    In August 1989 the Office of the Chief of Naval Research and the American Defense Preparedness Association conducted the first Navy Domestic Technology Transfair. The objective of the Transfair was to expose the US Navy`s years of solid experience across a broad span of technology to organizations outside of the Navy. It was an opportunity for private industry to capitalize on the Navy developed technology and this opening for industry was the primary focus of the Transfair. The event provided a unique forum to meet leading Navy scientific and engineering innovators face-to-face. Information was available concerning licensing of naval technology that was for sale to the private sector. Further, discussions covered opportunities for new cooperative research and development agreements with Navy laboratories and R&D activities. These agreements were authorized under the Federal Technology Transfer Act of 1986. The Transfair program was conducted in such a manner as to allow each Navy inventor, either scientist or engineer, to present a system, piece of hardware, or licensable concept in a formal paper presentation. Then, the Navy inventors were available in two, two-hour periods in which individual discussions were conducted, with attendees pursuing specific venues of cooperative agreements as desired. This report provides specifics concerning the technologies that were made available for transfer to the private sector during the Transfair. The Transfair concept sought to add special emphasis to the opening that the 1988 Technology Transfer Act brought to the marketplace. The experience was a step in the education of the possibilities for cooperation between the government and the private sector to share technology. Of additional significance is the economic enhancement for business expansion with the application of the technology to markets beyond defense.

  3. AcEST: DK956595 [AcEST

    Lifescience Database Archive (English)

    Full Text Available G_TRTV Major surface glycoprotein G OS=Turkey rhino... 30 7.4 >sp|P33495|VGLG_TRT...V Major surface glycoprotein G OS=Turkey rhinotracheitis virus GN=G PE=2 SV=1 Length = 391 Score = 30.4 bits...rface glycoprotein G OS=Turkey rhinotracheitis virus Align length 33 Score (bit) 30.4 E-value 7.4 Report BLA...t (release 56.9) Link to BlastX Result : Swiss-Prot sp_hit_id P33495 Definition sp|P33495|VGLG_TRTV Major su

  4. Evaluating Recommender Systems for Technology Enhanced Learning: A Quantitative Survey

    Science.gov (United States)

    Erdt, Mojisola; Fernandez, Alejandro; Rensing, Christoph

    2015-01-01

    The increasing number of publications on recommender systems for Technology Enhanced Learning (TEL) evidence a growing interest in their development and deployment. In order to support learning, recommender systems for TEL need to consider specific requirements, which differ from the requirements for recommender systems in other domains like…

  5. Orchestration in Learning Technology Research: Evaluation of a Conceptual Framework

    Science.gov (United States)

    Prieto, Luis P.; Dimitriadis, Yannis; Asensio-Pérez, Juan I.; Looi, Chee-Kit

    2015-01-01

    The term "orchestrating learning" is being used increasingly often, referring to the coordination activities performed while applying learning technologies to authentic settings. However, there is little consensus about how this notion should be conceptualised, and what aspects it entails. In this paper, a conceptual framework for…

  6. Expert system for economic evaluation of technological projects

    Directory of Open Access Journals (Sweden)

    Bohumil Hlavenka

    2001-01-01

    Full Text Available Apart from the technical level, a basic tool for decision-making and realization of the technical innovation project is also its economic effectiveness. It is assessed by comparing expenses and effects with respect to all-society interests and standards valid in a relevant period for the areas of technology, economy, ecology, safety of work, etc.

  7. Sodium-bearing Waste Treatment Technology Evaluation Report

    Energy Technology Data Exchange (ETDEWEB)

    Charles M. Barnes; Arlin L. Olson; Dean D. Taylor

    2004-05-01

    Sodium-bearing waste (SBW) disposition is one of the U.S. Department of Energy (DOE) Idaho Operation Office’s (NE-ID) and State of Idaho’s top priorities at the Idaho National Engineering and Environmental Laboratory (INEEL). The INEEL has been working over the past several years to identify a treatment technology that meets NE-ID and regulatory treatment requirements, including consideration of stakeholder input. Many studies, including the High-Level Waste and Facilities Disposition Environmental Impact Statement (EIS), have resulted in the identification of five treatment alternatives that form a short list of perhaps the most appropriate technologies for the DOE to select from. The alternatives are (a) calcination with maximum achievable control technology (MACT) upgrade, (b) steam reforming, (c) cesium ion exchange (CsIX) with immobilization, (d) direct evaporation, and (e) vitrification. Each alternative has undergone some degree of applied technical development and preliminary process design over the past four years. This report presents a summary of the applied technology and process design activities performed through February 2004. The SBW issue and the five alternatives are described in Sections 2 and 3, respectively. Details of preliminary process design activities for three of the alternatives (steam reforming, CsIX, and direct evaporation) are presented in three appendices. A recent feasibility study provides the details for calcination. There have been no recent activities performed with regard to vitrification; that section summarizes and references previous work.

  8. Evaluating Russian space nuclear reactor technology for United States applications

    International Nuclear Information System (INIS)

    Polansky, G.F.; Schmidt, G.L.; Voss, S.S.; Reynolds, E.L.

    1994-01-01

    Space nuclear power and nuclear electric propulsion are considered important technologies for planetary exploration, as well as selected earth orbit applications. The Nuclear Electric Propulsion Space Test Program (NEPSTP) was intended to provide an early flight demonstration of these technologies at relatively low cost through extensive use of existing Russian technology. The key element of Russian technology employed in the program was the Topaz II reactor. Refocusing of the activities of the Ballistic Missile Defense Organization (BMDO), combined with budgetary pressures, forced the cancellation of the NEPSTP at the end of the 1993 fiscal year. The NEPSTP was faced with many unique flight qualification issues. In general, the launch of a spacecraft employing a nuclear reactor power system complicates many spacecraft qualification activities. However, the NEPSTP activities were further complicated because the reactor power system was a Russian design. Therefore, this program considered not only the unique flight qualification issues associated with space nuclear power, but also with differences between Russian and United States flight qualification procedures. This paper presents an overview of the NEPSTP. The program goals, the proposed mission, the spacecraft, and the Topaz II space nuclear power system are described. The subject of flight qualification is examined and the inherent difficulties of qualifying a space reactor are described. The differences between United States and Russian flight qualification procedures are explored. A plan is then described that was developed to determine an appropriate flight qualification program for the Topaz II reactor to support a possible NEPSTP launch

  9. Arctic Technology Evaluation 2014 Oil-in-Ice Demonstration Report

    Science.gov (United States)

    2015-03-01

    Security Class (This Report) UNCLAS//Public 20. Security Class (This Page) UNCLAS//Public 21. No of Pages 52 22. Price Arctic Technology...specifically manned for the surveillance system. Smaller aerostats and sUAS could be deployed on skimming vessels; however, under many conditions their

  10. Evaluating the Impact of Technology Integration in Teaching and Learning

    Science.gov (United States)

    Adedokun-Shittu, Nafisat Afolake; Shittu, Abdul Jaleel Kehinde

    2014-01-01

    This article reports the impacts of technology integration on teaching and learning from a study that examines the impact of ICT deployment in teaching and learning at a University in Nigeria. The survey data were drawn from 593 respondents (students and lecturers) and the survey instrument employed for both the students and the lecturers is a…

  11. Description and preliminary evaluation of a diabetes technology simulation course.

    Science.gov (United States)

    Wilson, Rebecca D; Bailey, Marilyn; Boyle, Mary E; Seifert, Karen M; Cortez, Karla Y; Baker, Leslie J; Hovan, Michael J; Stepanek, Jan; Cook, Curtiss B

    2013-11-01

    We aim to provide data on a diabetes technology simulation course (DTSC) that instructs internal medicine residents in the use of continuous subcutaneous insulin infusion (CSII) and continuous glucose monitoring system (CGMS) devices. The DTSC was implemented during calendar year 2012 and conducted in the institution's simulation center. It consisted of a set of prerequisites, a practicum, and completion of a web-based inpatient CSII-ordering simulation. DTSC participants included only those residents in the outpatient endocrinology rotation. Questionnaires were used to determine whether course objectives were met and to assess the satisfaction of residents with the course. Questionnaires were also administered before and after the endocrine rotation to gauge improvement in familiarity with CSII and CGMS technologies. During the first year, 12 of 12 residents in the outpatient endocrinology rotation completed the DTSC. Residents reported that the course objectives were fully met. The mean satisfaction score with the course ranged from 4.0 to 4.9 (maximum, 5), with most variables rated above 4.5. Self-reported familiarity with the operation of CSII and CGMS devices increased significantly in the postrotation survey compared with that on the prerotation survey (both p technologies. In light of these preliminary findings, the course will continue to be offered, with further data accrual. Future work will involve piloting the DTSC approach among other types of providers, such as residents in other specialties or inpatient nursing staff. © 2013 Diabetes Technology Society.

  12. Technology evaluation: HPV vaccine (quadrivalent), Aventis Pasteur MSD/CSL.

    Science.gov (United States)

    Reinis, Milan

    2004-04-01

    CSL, licensee of UniQuest's HPV technology, and Aventis Pasteur MSD (a joint venture between Merck & Co and Aventis) are jointly developing a vaccine for the potential prophylaxis of genital warts and cervical cancer caused by human papilloma virus infection. Enrollment for a phase III trial has been completed.

  13. BIOSENSOR TECHNOLOGY EVALUATIONS FOR REAL-TIME/SOURCE WATER PROTECTION

    Science.gov (United States)

    Recent advances in electronics and computer technology have made great strides in the field of remote sensing and biomonitoring. The quality of drinking water sources has come under closer scrutiny in recent years. Issues ranging from ecological to public health and national se...

  14. Evaluation of TOGAF as a Management of Technology Framework

    DEFF Research Database (Denmark)

    Tambo, Torben; Bargholz, Jonas Magleby; Yde, Lars

    2016-01-01

    of several companies. Architectural views of studied companies do provide interesting observations on employee and corporate self-perception and potential and relevance for new technologies and change. The studied case provides such a platform for experiments in MOT practice and tentative introduction...

  15. In vivo evaluation on organ degeneration using radiation technology

    International Nuclear Information System (INIS)

    Kim, Sung Ho; Moon, C. J.; Kim, S. R.

    2010-05-01

    The purpose of this study is to investigate the effect of developed product on skin and reproductive system of animal due to irradiation via in vivo test, and finally acquire fundamental data for evaluation of protective materials on degenerative damages. - Evaluate the effect of candidate materials on UV-induced skin damages · Test the effect of candidate materials to protect the skin from photodamage, the gross and microscopic changes in the skin of hairless mice and materials-treated mice exposed chronically to UV - Evaluate the effect of developed product (HemoHIM) on radiation-induced reproductive system (female) damages - Evaluate the effect of developed product (HemoHIM) on chemical-induced reproductive system (female) damages - Evaluate the effect of developed product (HemoHIM) on radiation-induced reproductive system (male) damages - Evaluate the effect of developed product (HemoHIM) on chemical-induced reproductive system (male) damages

  16. Let's get technical: Enhancing program evaluation through the use and integration of internet and mobile technologies.

    Science.gov (United States)

    Materia, Frank T; Miller, Elizabeth A; Runion, Megan C; Chesnut, Ryan P; Irvin, Jamie B; Richardson, Cameron B; Perkins, Daniel F

    2016-06-01

    Program evaluation has become increasingly important, and information on program performance often drives funding decisions. Technology use and integration can help ease the burdens associated with program evaluation by reducing the resources needed (e.g., time, money, staff) and increasing evaluation efficiency. This paper reviews how program evaluators, across disciplines, can apply internet and mobile technologies to key aspects of program evaluation, which consist of participant registration, participant tracking and retention, process evaluation (e.g., fidelity, assignment completion), and outcome evaluation (e.g., behavior change, knowledge gain). In addition, the paper focuses on the ease of use, relative cost, and fit with populations. An examination on how these tools can be integrated to enhance data collection and program evaluation is discussed. Important limitations of and considerations for technology integration, including the level of technical skill, cost needed to integrate various technologies, data management strategies, and ethical considerations, are highlighted. Lastly, a case study of technology use in an evaluation conducted by the Clearinghouse for Military Family Readiness at Penn State is presented and illustrates how technology integration can enhance program evaluation. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. Evaluation of technology modifications required to apply clean coal technologies in Russian utilities. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    The report describes the following: overview of the Russian power industry; electric power equipment of Russia; power industry development forecast for Russia; clean coal technology demonstration program of the US Department of Energy; reduction of coal TPS (thermal power station) environmental impacts in Russia; and base options of advanced coal thermal power plants. Terms of the application of clean coal technology at Russian TPS are discussed in the Conclusions.

  18. An Orchestrating Evaluation of Complex Educational Technologies: a Case Study of a CSCL System

    Directory of Open Access Journals (Sweden)

    Luis P. Prieto

    2014-06-01

    Full Text Available As digital technologies permeate every aspect of our lives, the complexity of the educational settings, and of the technological support we use within them, unceasingly rises. This increased complexity, along with the need for educational practitioners to apply such technologies within multi-constraint authentic settings, has given rise to the notion of technology-enhanced learning practice as “orchestration of learning”. However, at the same time, the complexity involved in evaluating the benefits of such educational technologies has also increased, prompting questions about the way evaluators can cope with the different places, technologies, informants and issues involved in their evaluation activity. By proposing the notion of “orchestrating evaluation”, this paper tries to reconcile the often disparate “front office accounts” of research publications and the “shop floor practice” of evaluation of educational technology, through the case study of evaluating a system to help teachers in coordinating computer-supported collaborative learning (CSCL scenarios. We reuse an internationally-evaluated conceptual framework of “orchestration aspects” (design, management, adaptation, pragmatism, etc. to structure the case‟s narrative, showing how the original evaluation questions and methods were modulated in the face of the multiple (authentic evaluation setting constraints.

  19. Evaluation and selection of energy technologies using an integrated graph theory and analytic hierarchy process methods

    Directory of Open Access Journals (Sweden)

    P. B. Lanjewar

    2016-06-01

    Full Text Available The evaluation and selection of energy technologies involve a large number of attributes whose selection and weighting is decided in accordance with the social, environmental, technical and economic framework. In the present work an integrated multiple attribute decision making methodology is developed by combining graph theory and analytic hierarchy process methods to deal with the evaluation and selection of energy technologies. The energy technology selection attributes digraph enables a quick visual appraisal of the energy technology selection attributes and their interrelationships. The preference index provides a total objective score for comparison of energy technologies alternatives. Application of matrix permanent offers a better appreciation of the considered attributes and helps to analyze the different alternatives from combinatorial viewpoint. The AHP is used to assign relative weights to the attributes. Four examples of evaluation and selection of energy technologies are considered in order to demonstrate and validate the proposed method.

  20. Mixed Waste Integrated Program interim evaluation report on thermal treatment technologies

    International Nuclear Information System (INIS)

    Gillins, R.L.; DeWitt, L.M.; Wollerman, A.L.

    1993-02-01

    The Mixed Waste Integrated Program (MWIP) is one of several US Department of Energy (DOE) integrated programs established to organize and coordinate throughout the DOE complex the development of technologies for treatment of specific waste categories. The goal of the MWIP is to develop and deploy appropriate technologies for -the treatment of DOE mixed low-level and alpha-contaminated wastes in order to bring all affected DOE installations and projects into compliance with environmental laws. Evaluation of treatment technologies by the MWIP will focus on meeting waste form performance requirements for disposal. Thermal treatment technologies were an early emphasis for the MWIP because thermal treatment is indicated (or mandated) for many of the hazardous constituents in DOE mixed waste and because these technologies have been widely investigated for these applications. An advisory group, the Thermal Treatment Working Group (TTWG), was formed during the program's infancy to assist the MWIP in evaluating and prioritizing thermal treatment technologies suitable for development. The results of the overall evaluation scoring indicate that the four highest-rated technologies were rotary kilns, slagging kilns, electric-arc furnaces, and plasma-arc furnaces. The four highest-rated technologies were all judged to be applicable on five of the six waste streams and are the only technologies in the evaluation with this distinction. Conclusions as to the superiority of one technology over others are not valid based on this preliminary study, although some general conclusions can be drawn

  1. Manipulator system man-machine interface evaluation program. [technology assessment

    Science.gov (United States)

    Malone, T. B.; Kirkpatrick, M.; Shields, N. L.

    1974-01-01

    Application and requirements for remote manipulator systems for future space missions were investigated. A manipulator evaluation program was established to study the effects of various systems parameters on operator performance of tasks necessary for remotely manned missions. The program and laboratory facilities are described. Evaluation criteria and philosophy are discussed.

  2. AcEST: BP912122 [AcEST

    Lifescience Database Archive (English)

    Full Text Available YMU001_000015_D04 544 Adiantum capillus-veneris mRNA. clone: YMU001_000015_D04. BP91212...2 CL3363Contig1 Show BP912122 Clone id YMU001_000015_D04 Library YMU01 Length 544 Definition Adiantum ca...pillus-veneris mRNA. clone: YMU001_000015_D04. Accession BP912122 Tissue type prothallium Developmental stag...obium aromaticivorans (strain DSM 12444) Align length 58 Score (bit) 33.1 E-value 0.89 Report BLASTX 2.2.19 ...w generation of protein database search programs, Nucleic Acids Res. 25:3389-3402. Query= BP912122|Adiantum

  3. AcEST: BP912112 [AcEST

    Lifescience Database Archive (English)

    Full Text Available YMU001_000015_C08 546 Adiantum capillus-veneris mRNA. clone: YMU001_000015_C08. BP912112 - Show BP912112...is mRNA. clone: YMU001_000015_C08. Accession BP912112 Tissue type prothallium Developmental stage - Contig I...Arabidopsis thaliana Align length 171 Score (bit) 121.0 E-value 3.0e-27 Report BLASTX 2.2.19 [Nov-02-2008] R... protein database search programs, Nucleic Acids Res. 25:3389-3402. Query= BP912112|Adiantum capillus-veneri...s mRNA, clone: YMU001_000015_C08. (546 letters) Database: uniprot_sprot.fasta 412,525 sequences; 148,809,765

  4. AcEST: DK953623 [AcEST

    Lifescience Database Archive (English)

    Full Text Available Large structural protein OS=Zaire ebolavirus (strain Mayinga-76) Align length 64 Score (bit) 34.3 E-value 0... sp|Q05318|L_EBOZM Large structural protein OS=Zaire ebolavirus (... 34 0.56 sp|P... kinase receptor Tie-1 OS=B... 32 2.1 sp|Q6V1Q2|L_EBOZ5 Large structural protein OS=Zaire ebolavirus (... 32...N=H... 30 8.1 >sp|Q05318|L_EBOZM Large structural protein OS=Zaire ebolavirus (strain Mayinga-76) GN=L PE=3 ...|Q6V1Q2|L_EBOZ5 Large structural protein OS=Zaire ebolavirus (strain Kikwit-95) GN=L PE=3 SV=1 Length = 2212

  5. AcEST: DK950047 [AcEST

    Lifescience Database Archive (English)

    Full Text Available .5 >sp|Q91502|SC6A8_TORMA Creatine transporter OS=Torpedo marmorata PE=2 SV=1 Length = 611 Score = 31.2 bits...n sp|Q91502|SC6A8_TORMA Creatine transporter OS=Torpedo marmorata Align length 44 Score (bit) 31.2 E-value 5...atine transporter OS=Torpedo marmorata ... 31 5.5 sp|Q6P.........................................done Score E Sequences producing significant alignments: (bits) Value sp|Q91502|SC6A8_TORMA Cre... search results ■■ - Swiss-Prot (release 56.9) Link to BlastX Result : Swiss-Prot sp_hit_id Q91502 Definitio

  6. AcEST: BP917594 [AcEST

    Lifescience Database Archive (English)

    Full Text Available I11|MDTH_CITK8 Multidrug resistance protein mdtH OS=Citrob... 30 9.4 >sp|Q80W93|HYDIN_MOUSE Hydrocephalus-in.........done Score E Sequences producing significant alignments: (bits) Value sp|Q80W93|HYDIN_MOUSE Hydrocep...(release 56.9) Link to BlastX Result : Swiss-Prot sp_hit_id Q80W93 Definition sp|Q80W93|HYDIN_MOUSE Hydroc...ephalus-inducing protein OS=Mus musculus Align length 89 Score (bit) 35.4 E-value 0...halus-inducing protein OS=Mus musc... 35 0.17 sp|Q726E5|Y3208_DESVH UPF0078 membran

  7. Impact evaluation for University-Business Cooperation and Technology Transfer in higher education systems: cluster analysis

    Directory of Open Access Journals (Sweden)

    Tomoe Daniela Hamanaka Gusberti

    2017-09-01

    Full Text Available Abstract Higher education systems evolved in recent decades. Universities must not only provide society with capable professionals but also act in the market for technologies, knowledge, and ideas to promote technological development. This paper discusses the motivational performance evaluation system for technology transfer process, specifically the patterns’ evaluation of academic units considering micro-cultures and idiosyncrasies’ analysis, in the academic context of autonomy. Based on action research, the existing performance evaluation system was assessed, and multivariate cluster analysis was proposed and tested as a method to enable micro cultures’ identification and evaluation. The analysis proposed enabled a tool for reflexive discussion regarding the effectiveness of the institutional innovation system in academic units and Engineering Education, and its implications for social and technological development of industry and society enabled action proposals for improvement in the university’s technology transfer management process.

  8. Technology Evaluation Report 17. Videoconferencing in Theatre and Performance Studies

    Directory of Open Access Journals (Sweden)

    Mark Childs

    2003-04-01

    Full Text Available Previous reports in this series have indicated the growing acceptance of video-conferencing in education delivery. The current report compares a series of video-conferencing methods in an activity requiring precision of expression and communication: theatre and performance studies. The Accessing and Networking with National and International Expertise (ANNIE project is a two-year project undertaken jointly by the University of Warwick and the University of Kent at Canterbury, running from March 2001 to March 2003. The project's aim is to enhance students' learning experience in theatre studies by enabling access to research-based teaching and to workshops led by practitioners of national and international standing. Various technologies have been used, particularly ISDN video-conferencing, computer-mediated conferencing, and the Internet. This report concludes that video-conferencing methods will gain acceptance in education, as academic schools themselves are able to operate commonly available technology the assistance of specialised service units.

  9. Evaluating the impacts of energy supply technology options

    International Nuclear Information System (INIS)

    Peachey, B.R.

    2009-01-01

    The newly formed Chemical Institute of Canada (CIC)/Canadian Society for Chemical Engineering (CSChE) Energy Subject Division is working to develop a methodology for assessing and communicating to governments, regulators and the public the relative merits of different technologies for meeting energy demand requirements or reducing energy consumption. The focus is on developing a process that considers a broader range of issues than basic economics, or greenhouse gas (GHG) emissions. The 12 assessment criteria proposed would address five major areas of concerns including: a) how well assumptions have been tested against the scientific method over the life cycle of an energy development, b) impacts on the availability of the basic requirements for life, c) maintaining the quality of human life, d) maintaining the quality of the local environment (air, land and water), in the area where a specific technology is used, and e) considers the potential global impacts of GHG emissions. (author)

  10. Evaluating business models for microgrids: Interactions of technology and policy

    International Nuclear Information System (INIS)

    Hanna, Ryan; Ghonima, Mohamed; Kleissl, Jan; Tynan, George; Victor, David G.

    2017-01-01

    Policy makers are increasingly focused on strategies to decentralize the electricity grid. We analyze the business model for one mode of decentralization—microgrids—and quantify the economics for self-supply of electricity and thermal energy and explicitly resolve technological as well as policy variables. We offer a tool, based on the Distributed Energy Resources Customer Adoption Model (DER-CAM) modeling framework, that determines the cost-minimal capacity and operation of distributed energy resources in a microgrid, and apply it in southern California to three “iconic” microgrid types which represent typical commercial adopters: a large commercial building, critical infrastructure, and campus. We find that optimal investment leads to some deployment of renewables but that natural gas technologies underpin the most robust business cases—due in part to relatively cheap gas and high electricity rates. This finding contrasts sharply with most policy advocacy, which has focused on the potentials for decentralization of the grid to encourage deployment of renewables. Decentralization could radically reduce customer energy costs, but without the right policy framework it could create large numbers of small decentralized sources of gas-based carbon emissions that will be difficult to control if policy makers want to achieve deep cuts in greenhouse gas emissions. - Highlights: • We offer a modeling tool to study technology and policy variables for microgrids. • We construct comprehensive load profiles for three likely adopters of microgrids. • Investment in natural gas generators is key to enabling business models. • Solar PV and storage are optimal but as supplements to gas generation. • Business models are highly robust to sensitivity in technology and policy variables.

  11. Evaluation of Student Outcomes in Materials Science and Technology

    Science.gov (United States)

    Piippo, Steven

    1996-01-01

    This paper specifies 14 benchmarks and exit standards for the introduction of Materials Science and Technology in a secondary school education. Included is the standard that students should be able to name an example of each category of technological materials including metals, glass/ceramics, polymers (plastics) and composites. Students should know that each type of solid material has specific properties that can be measured. Students will learn that all solid materials have either a long range crystalline structure or a short range amorphous structure (i.e., glassy). They should learn the choice of materials for a particular application depends on the properties of the material, and the properties of the material depends on its crystal structure and microstructure. The microstructure may be modified by the methods by which the material is processed; students should explain this by the example of sintering a ceramic body to reduce its porosity and increase its densification and strength. Students will receive exposure to the world of work, post secondary educational opportunities, and in general a learning that will lead to a technologically literate intelligent citizen.

  12. Environmental and Financial Evaluation of Passenger Vehicle Technologies in Belgium

    Directory of Open Access Journals (Sweden)

    Maarten Messagie

    2013-11-01

    Full Text Available Vehicles with alternative drive trains are regarded as a promising substitute for conventional cars, considering the growing concern about oil depletion and the environmental impact of our transportation system. However, “clean” technologies will only be viable when they are cost-efficient. In this paper, the environmental impacts and the financial costs of different vehicle technologies are calculated for an average Belgian driver. Environmentally friendly vehicles are compared with conventional petrol and diesel vehicles. The assessments are done from a life cycle perspective. The effect on human health, resources and ecosystems is considered when calculating the environmental impact. The total cost of ownership (TCO model includes the purchase price, registration and road taxes, insurance, fuel or electricity cost, maintenance, tires replacement, technical control, battery leasing and battery replacement. In the presented analysis different vehicle technologies and fuels are compared (petrol, diesel, hybrid electric vehicles (HEVs, battery electric vehicles (BEVs and plug-in hybrid electric vehicles (PHEVs on their level of environmental impact and cost per kilometer. The analysis shows a lower environmental impact for electric vehicles. However, electric vehicles have a higher total cost of ownership compared to conventional vehicles, even though the fuel operating costs are significantly lower. The purchase cost of electric vehicles is highly linked to the size of the battery pack, and not to the size of the electric vehicle. This explains the relative high cost for the electric city cars and the comparable cost for the medium and premium cars.

  13. HyQue: evaluating hypotheses using Semantic Web technologies

    Science.gov (United States)

    2011-01-01

    Background Key to the success of e-Science is the ability to computationally evaluate expert-composed hypotheses for validity against experimental data. Researchers face the challenge of collecting, evaluating and integrating large amounts of diverse information to compose and evaluate a hypothesis. Confronted with rapidly accumulating data, researchers currently do not have the software tools to undertake the required information integration tasks. Results We present HyQue, a Semantic Web tool for querying scientific knowledge bases with the purpose of evaluating user submitted hypotheses. HyQue features a knowledge model to accommodate diverse hypotheses structured as events and represented using Semantic Web languages (RDF/OWL). Hypothesis validity is evaluated against experimental and literature-sourced evidence through a combination of SPARQL queries and evaluation rules. Inference over OWL ontologies (for type specifications, subclass assertions and parthood relations) and retrieval of facts stored as Bio2RDF linked data provide support for a given hypothesis. We evaluate hypotheses of varying levels of detail about the genetic network controlling galactose metabolism in Saccharomyces cerevisiae to demonstrate the feasibility of deploying such semantic computing tools over a growing body of structured knowledge in Bio2RDF. Conclusions HyQue is a query-based hypothesis evaluation system that can currently evaluate hypotheses about the galactose metabolism in S. cerevisiae. Hypotheses as well as the supporting or refuting data are represented in RDF and directly linked to one another allowing scientists to browse from data to hypothesis and vice versa. HyQue hypotheses and data are available at http://semanticscience.org/projects/hyque. PMID:21624158

  14. HyQue: evaluating hypotheses using Semantic Web technologies.

    Science.gov (United States)

    Callahan, Alison; Dumontier, Michel; Shah, Nigam H

    2011-05-17

    Key to the success of e-Science is the ability to computationally evaluate expert-composed hypotheses for validity against experimental data. Researchers face the challenge of collecting, evaluating and integrating large amounts of diverse information to compose and evaluate a hypothesis. Confronted with rapidly accumulating data, researchers currently do not have the software tools to undertake the required information integration tasks. We present HyQue, a Semantic Web tool for querying scientific knowledge bases with the purpose of evaluating user submitted hypotheses. HyQue features a knowledge model to accommodate diverse hypotheses structured as events and represented using Semantic Web languages (RDF/OWL). Hypothesis validity is evaluated against experimental and literature-sourced evidence through a combination of SPARQL queries and evaluation rules. Inference over OWL ontologies (for type specifications, subclass assertions and parthood relations) and retrieval of facts stored as Bio2RDF linked data provide support for a given hypothesis. We evaluate hypotheses of varying levels of detail about the genetic network controlling galactose metabolism in Saccharomyces cerevisiae to demonstrate the feasibility of deploying such semantic computing tools over a growing body of structured knowledge in Bio2RDF. HyQue is a query-based hypothesis evaluation system that can currently evaluate hypotheses about the galactose metabolism in S. cerevisiae. Hypotheses as well as the supporting or refuting data are represented in RDF and directly linked to one another allowing scientists to browse from data to hypothesis and vice versa. HyQue hypotheses and data are available at http://semanticscience.org/projects/hyque.

  15. HyQue: evaluating hypotheses using Semantic Web technologies

    Directory of Open Access Journals (Sweden)

    Callahan Alison

    2011-05-01

    Full Text Available Abstract Background Key to the success of e-Science is the ability to computationally evaluate expert-composed hypotheses for validity against experimental data. Researchers face the challenge of collecting, evaluating and integrating large amounts of diverse information to compose and evaluate a hypothesis. Confronted with rapidly accumulating data, researchers currently do not have the software tools to undertake the required information integration tasks. Results We present HyQue, a Semantic Web tool for querying scientific knowledge bases with the purpose of evaluating user submitted hypotheses. HyQue features a knowledge model to accommodate diverse hypotheses structured as events and represented using Semantic Web languages (RDF/OWL. Hypothesis validity is evaluated against experimental and literature-sourced evidence through a combination of SPARQL queries and evaluation rules. Inference over OWL ontologies (for type specifications, subclass assertions and parthood relations and retrieval of facts stored as Bio2RDF linked data provide support for a given hypothesis. We evaluate hypotheses of varying levels of detail about the genetic network controlling galactose metabolism in Saccharomyces cerevisiae to demonstrate the feasibility of deploying such semantic computing tools over a growing body of structured knowledge in Bio2RDF. Conclusions HyQue is a query-based hypothesis evaluation system that can currently evaluate hypotheses about the galactose metabolism in S. cerevisiae. Hypotheses as well as the supporting or refuting data are represented in RDF and directly linked to one another allowing scientists to browse from data to hypothesis and vice versa. HyQue hypotheses and data are available at http://semanticscience.org/projects/hyque.

  16. Oak Ridge National Laboratory Technology Logic Diagram. Volume 1, Technology Evaluation: Part A, Decontamination and Decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Strategic Roadmap for the Oak Ridge Reservation is a generalized planning document that identifies broad categories of issues that keep ORNL outside full compliance with the law and other legally binding agreements. Possible generic paths to compliance, issues, and the schedule for resolution of the issues one identified. The role of the Oak Ridge National Laboratory Technology Logic Diagram (TLD) is then to identify specific site issues (problems), identify specific technologies that can be brought to bear on the issues, and assess the current status and readiness of these remediation technologies within the constraints of the schedule commitment. Regulatory requirements and commitments contained in the Strategic Roadmap for the Oak Ridge Reservation are also included in the TLD as constraints to the application of immature technological solutions. Some otherwise attractive technological solutions may not be employed because they may not be deployable on the schedule enumerated in the regulatory agreements. The roadmap for ORNL includes a list of 46 comprehensive logic diagrams for WM of low-level, radioactive-mixed, hazardous, sanitary and industrial. and TRU waste. The roadmapping process gives comparisons of the installation as it exists to the way the installation should exist under full compliance. The identification of the issues is the goal of roadmapping. This allows accurate and timely formulation of activities.

  17. Y-12 Plant Remedial Action technology logic diagram. Volume I: Technology evaluation

    International Nuclear Information System (INIS)

    1994-09-01

    The Y-12 Plant Remedial Action Program addresses remediation of the contaminated groundwater, surface water and soil in the following areas located on the Oak Ridge Reservation: Chestnut Ridge, Bear Creek Valley, the Upper and Lower East Fork Popular Creek Watersheds, CAPCA 1, which includes several areas in which remediation has been completed, and CAPCA 2, which includes dense nonaqueous phase liquid wells and a storage facility. There are many facilities within these areas that are contaminated by uranium, mercury, organics, and other materials. This Technology Logic Diagram identifies possible remediation technologies that can be applied to the soil, water, and contaminants for characterization, treatment, and waste management technology options are supplemented by identification of possible robotics or automation technologies. These would facilitate the cleanup effort by improving safety, of remediation, improving the final remediation product, or decreasing the remediation cost. The Technology Logic Diagram was prepared by a diverse group of more than 35 scientists and engineers from across the Oak Ridge Reservation. Most are specialists in the areas of their contributions. 22 refs., 25 tabs

  18. Evaluation of new technology for detection of erosion-corrosion

    International Nuclear Information System (INIS)

    Walker, S.M.; Martinez, E.

    1994-01-01

    Faster and more accurate methods of wall thickness measurement have received considerable attention by utilities. Examination without removing insulation has been of particularly high interest because insulation removal is the largest component of the inspection cost. Several inspection systems have been developed which are touted as applicable to erosion corrosion detection through insulation. The Electric Power Research Institute (EPRI) Nondestructive Evaluation (NDE) Center has recently evaluated two of these systems. During the evaluation, accuracy and repeatability measurements were made on insulated pipe of known thickness

  19. Methodology for evaluation of railroad technology research projects

    Science.gov (United States)

    1981-04-01

    This Project memorandum presents a methodology for evaluating railroad research projects. The methodology includes consideration of industry and societal benefits, with special attention given to technical risks, implementation considerations, and po...

  20. In vivo evaluation on organ degeneration using radiation technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sung Ho; Moon, C. J.; Kim, S. R. [Chonnam National University, Gwangju (Korea, Republic of)

    2010-05-15

    The purpose of this study is to investigate the effect of developed product on skin and reproductive system of animal due to irradiation via in vivo test, and finally acquire fundamental data for evaluation of protective materials on degenerative damages. <1st year> - Evaluate the effect of candidate materials on UV-induced skin damages {center_dot} Test the effect of candidate materials to protect the skin from photodamage, the gross and microscopic changes in the skin of hairless mice and materials-treated mice exposed chronically to UV <2nd year> - Evaluate the effect of developed product (HemoHIM) on radiation-induced reproductive system (female) damages - Evaluate the effect of developed product (HemoHIM) on chemical-induced reproductive system (female) damages <3rd year> - Evaluate the effect of developed product (HemoHIM) on radiation-induced reproductive system (male) damages - Evaluate the effect of developed product (HemoHIM) on chemical-induced reproductive system (male) damages

  1. A comunidade científica, o Estado e as universidades, no atual estágio de desenvolvimento científico tecnológico Scientific community, State and universities in the current stage of scientific technological development

    Directory of Open Access Journals (Sweden)

    Michelangelo Giotto Santoro Trigueiro

    2001-12-01

    Full Text Available O trabalho discute a relação entre a comunidade científica, o Estado e a universidade no contexto atual do desenvolvimento científico-tecnológico. Enfatiza a dimensão política das transformações recentes, sobretudo no tocante aos sistemas decisórios, contrapondo momento mais verticalizado com cenário mais democratizado, e as conseqüências das transformações políticas contemporâneas, na sociedade brasileira. Procura analisar as mútuas correlações entre o Estado, as universidades e as comunidades científicas, a partir do entendimento da especificidade de cada um destes atores na condução do desenvolvimento científico-tecnológico nacional. A esse respeito, é analisado todo um conjunto de ações que se coadunam com o novo modo de produção do conhecimento, buscando destacar a natureza controversa e polêmica da inserção do Estado e o caráter conservador da comunidade científica, bem como a resistência da universidade na proposição de novas linhas de atuação no enfrentamento dos desafios trazidos pela ciência e tecnologias contemporâneas.This article discusses the relationship between scientific community, the State and university in the current circumstances of scientific-technological development. It stresses the political dimension of recent changes, specially regarding decision systems, comparing a more vertical moment and a more democratic scenario and the consequences of contemporary political changes in Brazilian society. It examines mutual relations between the State, universities and the scientific community, based on the understanding of each of those actors' specificities in advancing national scientific-technological development. A whole set of actions is examined in accordance with knowledge's new mode of production in order to highlight the controversial nature of the State and the conservative character of the scientific community as well as the resistance of the university in proposing new lines

  2. Health Information Technology Usability Evaluation Scale (Health-ITUES) for Usability Assessment of Mobile Health Technology: Validation Study.

    Science.gov (United States)

    Schnall, Rebecca; Cho, Hwayoung; Liu, Jianfang

    2018-01-05

    Mobile technology has become a ubiquitous technology and can be particularly useful in the delivery of health interventions. This technology can allow us to deliver interventions to scale, cover broad geographic areas, and deliver technologies in highly tailored ways based on the preferences or characteristics of users. The broad use of mobile technologies supports the need for usability assessments of these tools. Although there have been a number of usability assessment instruments developed, none have been validated for use with mobile technologies. The goal of this work was to validate the Health Information Technology Usability Evaluation Scale (Health-ITUES), a customizable usability assessment instrument in a sample of community-dwelling adults who were testing the use of a new mobile health (mHealth) technology. A sample of 92 community-dwelling adults living with HIV used a new mobile app for symptom self-management and completed the Health-ITUES to assess the usability of the app. They also completed the Post-Study System Usability Questionnaire (PSSUQ), a widely used and well-validated usability assessment tool. Correlations between these scales and each of the subscales were assessed. The subscales of the Health-ITUES showed high internal consistency reliability (Cronbach alpha=.85-.92). Each of the Health-ITUES subscales and the overall scale was moderately to strongly correlated with the PSSUQ scales (r=.46-.70), demonstrating the criterion validity of the Health-ITUES. The Health-ITUES has demonstrated reliability and validity for use in assessing the usability of mHealth technologies in community-dwelling adults living with a chronic illness. ©Rebecca Schnall, Hwayoung Cho, Jianfang Liu. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 05.01.2018.

  3. Description and evaluation of foreign wind turbine technology

    International Nuclear Information System (INIS)

    1995-06-01

    It is stated that sales of Danish-manufactured wind turbines abroad are decreasing due to an increase in production, marketing and technology research in other countries. The aim was to give an account of this international development which could form the basis for the future strategies of the Danish Wind turbine industry. The study is based on a survey of relevant literature, interviews with experts on the subject and the collection of the latest data. The survey is limited to wind turbines with a larger capacity than 50 kW. Recommendations are given as to how to conserve and develop the market for Danish wind turbines. (AB) 17 refs

  4. Evaluation of technology transfer on collider quadrupole manufacture at LBL

    International Nuclear Information System (INIS)

    Boeer, J.; Fechteler, H.; Moryson, H.; Sommer, F.; Grueneberg, H.; Kreutz, R.; Krischel, D.; Bensiek, W.; Ryan, B.

    1992-01-01

    As part of the contract on the collider quadruple magnets a technology transfer to Siemens Power Generation Group (KWU) was performed at Lawrence Berkeley Laboratory, Berkeley in September 1991. One inner and outer 1 m long coil each should be manufactured under the surveillance of LBL staff to become familiar with the coil production facilities available at LBL. In addition, KWU had the possibility to observe the production process of 5 m quadruple coils. The work is successfully completed and provided additional information for the further hardware operations at the Siemens site

  5. Evaluation of complementary technologies to reduce bio engine emissions

    Energy Technology Data Exchange (ETDEWEB)

    Blowes, J.H.

    2003-09-01

    This report summaries the results of a study examining the technical and economic feasibility of exhaust gas treatment technologies for reducing emissions from diesel engines burning pyrolysis oil to within internationally recognised limits. Details are given of the burning of pyrolysis oils in reciprocating engines, the reviewing of information on pyrolysis oils and engines, and the aim to produce detailed information for securing investment for a British funded diesel project. The burning of the pyrolysis oils in an oxygen-rich atmosphere to allow efficient combustion with acceptable exhaust emission limits is discussed along with the problems caused by the deterioration of the injection system.

  6. Artificial intelligence to maximise contributions of nondestructive evaluation to materials science and technology

    International Nuclear Information System (INIS)

    Baldev Raj; Rajagopalan, C.

    1996-01-01

    The paper reviews the current status of Nondestructive Testing and Evaluation (NDT and E), in relation to materials science and technology. It suggests a path of growth for Nondestructive Testing and Evaluation, taking into account the increase in data and knowledge. We recommend Artificial Intelligence (AI) concepts for maximising the contributions of and benefits from, Nondestructive Testing and Evaluation. (author)

  7. Evaluating and Predicting Patient Safety for Medical Devices With Integral Information Technology

    Science.gov (United States)

    2005-01-01

    323 Evaluating and Predicting Patient Safety for Medical Devices with Integral Information Technology Jiajie Zhang, Vimla L. Patel, Todd R...errors are due to inappropriate designs for user interactions, rather than mechanical failures. Evaluating and predicting patient safety in medical ...the users on the identified trouble spots in the devices. We developed two methods for evaluating and predicting patient safety in medical devices

  8. Oak Ridge K-25 Site Technology Logic Diagram. Volume 1, Technology evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. This Volume, Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This volume is divided into ten chapters. The first chapter is a brief introduction, and the second chapter details the technical approach of the TLD. These categories are the work activities necessary for successful decontamination and decommissioning, waste management, and remedial action of the K-25 Site. The categories are characterization, decontamination, dismantlement, robotics and automation, remedial action, and waste management. Materials disposition is addressed in Chap. 9. The final chapter contains regulatory compliance information concerning waste management, remedial action, and decontamination and decommissioning.

  9. Evaluation of condensate filtration technologies in fossil plants

    Energy Technology Data Exchange (ETDEWEB)

    D' Angelo, Philip J. [JoDan Technologies Ltd., Glen Mills, PA (United States)

    2009-09-15

    Long-term protection of electric power generating station boilers depends upon the quality of their feedwater chemistry with respect to the transport and deposition of corrosion products to the boilers from various corrosion sources in the plant's condensate and feedwater cycle. It is in the utility's best interests to expand their programs to include ways to reduce the transport of corrosion products, especially those that occur during plant start-ups. Condensate filtration is a strategy employed by some utilities with demonstrable results in minimizing corrosion product transport and achieving a return on their investment. This paper provides a comparative review of available condensate filtration technologies as well as performance data from fossil plants with the new large diameter high flow filtration systems. Additionally, the paper identifies critical parameters to consider before installation as well as the necessity for agreement between utilities and suppliers on common filtration terminology definitions, to insure an ''apple-to-apple'' basis when comparing a system or technology from more than one supplier. (orig.)

  10. Evaluation of environmental control technologies for magnetic fields

    Energy Technology Data Exchange (ETDEWEB)

    1978-08-01

    The peripheral magnetic fields of several energy-related technologies are calculated, and shielding options are studied for three field intensities as possible exposure levels: 200 G, 10 G, and 0.3 G. Seven fusion reactor designs are studied. For a 200-G field level, shielding is not required. For the 10- and 0.3-G levels, land is the most economical shielding method, with shield coils an acceptable alternative at 0.3 G. Nonnuclear technologies studied are superconducting magnetic energy storage, magnetohydrodynamic (MHD) electric generators, magnetically levitated vehicles, superconducting ac generators, and underground transmission lines. Superconducting ac generators and underground transmission lines require no shielding. The superconducting magnetic energy storage coil requires no shielding for 200 G. Both a shield coil and land are needed to meet 10 G or 0.3 G. The MHD generator needs no shielding to 200 G and 10 G. Land is the most economical means of meeting the 0.3 G level. Most of the magnetically levitated vehicles require no shielding to 200 G. The field on-board can be reduced from 200 to 25 G, depending upon the vehicle design, with shield coils. The use of iron, or another permeable material, is necessary to reduce the field to 10 G or 0.3 G. However, iron introduces too much added weight to allow efficient operation.

  11. Evaluation of High-Performance Network Technologies for ITER

    Energy Technology Data Exchange (ETDEWEB)

    Zagar, K.; Kolaric, P.; Sabjan, R.; Zagar, A. [Cosylab d.d., Ljubljana (Slovenia); Hunt, S. [Alceli Hunt Beratung, Meisterschwanden (Switzerland)

    2009-07-01

    To facilitate fast feedback control of plasma, ITER's Control, Data Access and Communication system (CODAC) will need to provide a mechanism for hard real-time communication between its distributed nodes. In particular, four types of high-performance communication have been identified. Synchronous Databus Network (SDN) is to provide an ability to distribute parameters of plasma (estimated to about 5000 double-valued signals) across the system to allow for 1 ms control cycles. Event Distribution Network (EDN) and Time Communication Network (TCN) are to allow synchronization of node I/O operations to 10 ns. Finally, the Audio Video Network (AVN) is to provide sufficient bandwidth for streaming of surveillance and diagnostics video at a high resolution (1024*1024) and frame rate (30 Hz). In this article, we present some combinations of common off-the-shelf (COTS) technologies that allow the above requirements to be met. Also, we present the performances achieved in a practical (though small scale) technology demonstrator, which involved a real-time LINUS operating running on National Instruments' PXI platform, UDP communication implemented directly atop the Ethernet network adapter, CISCO switches, Micro Research Finland's timing and event solution, and GigE audio-video streaming. This document is composed of an abstract followed by the presentation transparencies. (authors)

  12. Evaluation of high-performance network technologies for ITER

    Energy Technology Data Exchange (ETDEWEB)

    Zagar, K., E-mail: klemen.zagar@cosylab.co [Cosylab d.d., 1000 Ljubljana (Slovenia); Hunt, S. [Alceli Hunt Beratung, 5616 Meisterschwanden (Switzerland); Kolaric, P.; Sabjan, R.; Zagar, A.; Dedic, J. [Cosylab d.d., 1000 Ljubljana (Slovenia)

    2010-07-15

    For the fast feedback plasma controllers, ITER's Control, Data Access and Communication system (CODAC) will need to provide a mechanism for hard real-time communication between its distributed nodes. In particular, the ITER CODAC team identified four types of high-performance communication applications. Synchronous Databus Network (SDN) is to provide an ability to distribute parameters of plasma (estimated to about 5000 double-valued signals) across the system to allow for 1 ms control cycles. Event Distribution Network (EDN) and Time Communication Network (TCN) are to allow synchronization of node I/O operations to 10 ns. Finally, the Audio-Video Network (AVN) is to provide sufficient bandwidth for streaming of surveillance and diagnostics video at a high resolution (1024 x 1024) and frame rate (30 Hz). In this article, we present some combinations of common-off-the-shelf (COTS) technologies that allow the above requirements to be met. Also, we present the performances achieved in a practical (though small scale) technology demonstrator, which involved a real-time Linux operating running on National Instruments' PXI platform, UDP communication implemented directly atop the Ethernet network adapter, CISCO switches, Micro Research Finland's timing and event solution, and GigE audio-video streaming.

  13. Evaluation of high-performance network technologies for ITER

    International Nuclear Information System (INIS)

    Zagar, K.; Hunt, S.; Kolaric, P.; Sabjan, R.; Zagar, A.; Dedic, J.

    2010-01-01

    For the fast feedback plasma controllers, ITER's Control, Data Access and Communication system (CODAC) will need to provide a mechanism for hard real-time communication between its distributed nodes. In particular, the ITER CODAC team identified four types of high-performance communication applications. Synchronous Databus Network (SDN) is to provide an ability to distribute parameters of plasma (estimated to about 5000 double-valued signals) across the system to allow for 1 ms control cycles. Event Distribution Network (EDN) and Time Communication Network (TCN) are to allow synchronization of node I/O operations to 10 ns. Finally, the Audio-Video Network (AVN) is to provide sufficient bandwidth for streaming of surveillance and diagnostics video at a high resolution (1024 x 1024) and frame rate (30 Hz). In this article, we present some combinations of common-off-the-shelf (COTS) technologies that allow the above requirements to be met. Also, we present the performances achieved in a practical (though small scale) technology demonstrator, which involved a real-time Linux operating running on National Instruments' PXI platform, UDP communication implemented directly atop the Ethernet network adapter, CISCO switches, Micro Research Finland's timing and event solution, and GigE audio-video streaming.

  14. Cyber-Neuropsychology: application of new technologies in neuropsychological evaluation.

    Science.gov (United States)

    Bernardo-Ramos, Mercedes; Franco-Martín, Manuel A; Soto-Pérez, Felipe

    2012-01-01

    Neuropsychological evaluation deals with the study of cerebral functioning through the persons' performance. It makes it possible to collaborate the clinical diagnosis and to provide information on deficit and skills. Specialized care in rural environments is uncommon, and often means impossibility to access some services. This study has aimed to evaluate the possibility of using neuropsychological evaluation by internet videoconferences. Our research was based on the traditional and online application of the SCIP-S to 30 subjects who were diagnosed with schizophrenia. The 30 subjects were randomly divided into two groups (Group A and B). Both groups underwent the two conditions inversely. The results show some differences and similarities when the results in both types of applications SCIP-S are compared. In conclusion, cyber-neuropsychology is possible and may be a complement and alternative to traditional assessment when they cannot develop.

  15. Experimental Design for Evaluating Selected Nondestructive Measurement Technologies - Advanced Reactor Technology Milestone: M3AT-16PN2301043

    Energy Technology Data Exchange (ETDEWEB)

    Ramuhalli, Pradeep [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hirt, Evelyn H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pitman, Stan G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dib, Gerges [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Roy, Surajit [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Good, Morris S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Walker, Cody M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-07-16

    The harsh environments in advanced reactors (AdvRx) increase the possibility of degradation of safety-critical passive components, and therefore pose a particular challenge for deployment and extended operation of these concepts. Nondestructive evaluation technologies are an essential element for obtaining information on passive component condition in AdvRx, with the development of sensor technologies for nondestructively inspecting AdvRx passive components identified as a key need. Given the challenges posed by AdvRx environments and the potential needs for reducing the burden posed by periodic in-service inspection of hard-to-access and hard-to-replace components, a viable solution may be provided by online condition monitoring of components. This report identifies the key challenges that will need to be overcome for sensor development in this context, and documents an experimental plan for sensor development, test, and evaluation. The focus of initial research and development is on sodium fast reactors, with the eventual goal of the research being developing the necessary sensor technology, quantifying sensor survivability and long-term measurement reliability for nondestructively inspecting critical components. Materials for sensor development that are likely to withstand the harsh environments are described, along with a status on the fabrication of reference specimens, and the planned approach for design and evaluation of the sensor and measurement technology.

  16. Teacher evaluation system, institutions of technology higher education: quality guidelines

    Directory of Open Access Journals (Sweden)

    Laura Belkis Parada Romero

    2016-01-01

    Full Text Available Due to the globalization of education, it has become prevalent to strengthen the quality systems to ensure that educational actors in higher education institutions are the best. In this context teachers are given a main role since they are cornerstones in educational processes. Currently, teacher quality is assessed through an assessment or evaluation system. Almost every university evaluates its teachers, but there is no legal regulation on how to do it, in most institutions there is a professional in charge of designing and applying assessment instruments according to the authors he/she prefers. In most universities, on the one hand, it is used a traditional questionnaire aiming to collect data about dimensions associated with teaching, on the other hand, there is another option in which assessment models include self-evaluation, as in some cases in Chile. That’s why one of the concerns of this research is to propose guidelines for a more qualitative and formative assessment not exclusively following political parameters –based on administrative decisions–, but following emerging proposals with a deeper analysis. Nowadays the main actors in teacher evaluation are teachers, students and administrative staff, every six months these actors are evaluated by using an assessment tool that they usually do not know. The research investigates the perception actors in teacher evaluation have regarding its objectives, methods and stages, so they put forward ideas on how to restructure the current institutional assessment and propose improvements aiming at both the quantitative aspect and the qualitative analysis of performances and skills.

  17. Optimization evaluation of cutting technology based on mechanical parts

    Science.gov (United States)

    Wang, Yu

    2018-04-01

    The relationship between the mechanical manufacturing process and the carbon emission is studied on the basis of the process of the mechanical manufacturing process. The formula of carbon emission calculation suitable for mechanical manufacturing process is derived. Based on this, a green evaluation method for cold machining process of mechanical parts is proposed. The application verification and data analysis of the proposed evaluation method are carried out by an example. The results show that there is a great relationship between the mechanical manufacturing process data and carbon emissions.

  18. Feasibility evaluation of downhole oil/water separator (DOWS) technology.

    Energy Technology Data Exchange (ETDEWEB)

    Veil, J. A.; Langhus, B. G.; Belieu, S.

    1999-01-31

    The largest volume waste stream associated with oil and gas production is produced water. A survey conducted by the American Petroleum Institute estimated that 20.9 billion barrels of produced water were disposed of in 1985 (Wakim 1987). Of this total, 91% was disposed of through disposal wells or was injected for enhanced oil recovery projects. Treatment and disposal of produced water represents a significant cost for operators. A relatively new technology, downhole oil/water separators (DOWS), has been developed to reduce the cost of handling produced water. DOWS separate oil and gas from produced water at the bottom of the well and reinject some of the produced water into another formation or another horizon within the same formation, while the oil and gas are pumped to the surface. Since much of the produced water is not pumped to the surface, treated, and pumped from the surface back into a deep formation, the cost of handling produced water is greatly reduced. When DOWS are used, additional oil may be recovered as well. In cases where surface processing or disposal capacity is a limiting factor for further production within a field, the use of DOWS to dispose of some of the produced water can allow additional production within that field. Simultaneous injection using DOWS minimizes the opportunity for contamination of underground sources of drinking water (USDWs) through leaks in tubing and casing during the injection process. This report uses the acronym 'DOWS' although the technology may also be referred to as DHOWS or as dual injection and lifting systems (DIALS). Simultaneous injection using DOWS has the potential to profoundly influence the domestic oil industry. The technology has been shown to work in limited oil field applications in the United States and Canada. Several technical papers describing DOWS have been presented at oil and gas industry conferences, but for the most part, the information on the DOWS technology has not been widely

  19. Instructional Technology Professional Development Evaluation: Developing a High Quality Model

    Science.gov (United States)

    Gaytan, Jorge A.; McEwen, Beryl C.

    2010-01-01

    Background: The literature contains very few studies that focused on evaluating the impact of professional development activities on student learning. And, many of these studies failed to determine whether the professional development activities met their primary goal--to improve the learning process. Purpose: The purpose of this study was to use…

  20. Audit and Evaluation of Computer Security. Computer Science and Technology.

    Science.gov (United States)

    Ruthberg, Zella G.

    This is a collection of consensus reports, each produced at a session of an invitational workshop sponsored by the National Bureau of Standards. The purpose of the workshop was to explore the state-of-the-art and define appropriate subjects for future research in the audit and evaluation of computer security. Leading experts in the audit and…

  1. Evaluation and technologic improvement of an enhanced imaging system

    International Nuclear Information System (INIS)

    Henry, D.

    1990-08-01

    Feature-based systems that combine imaging and signal analysis capabilities may be useful for nondestructive evaluation (NDE) of plant components. This report describes the metallurgical evaluation conducted to verify the performance of a feature-based system to discriminate intergranular stress corrosion cracking (IGSCC) from benign geometrical reflectors. The ultrasonic examination results were also evaluated by examination personnel trained in intergranular stress corrosion cracking (IGSCC) detection techniques. The welds were examined prior to their removal from the recirculation and Residual-Heat-Removal (RHR) piping systems of the Peach Bottom Atomic Power Plant, as described in the Phase 2 Interim Report issued in June 1989. In this phase of the program, a metallurgical evaluation was performed on piping system welds that were examined ultrasonically using a feature-based system for analysis. The feature-based system correctly identified crack, but incorrectly identified other features, e.g., root geometry and metallurgical interfaces, as cracks. While the results of the analysis by the feature-based system were not identical to the results of analysis by trained personnel, the overall performance of the feature-based system was comparable to that of the trained personnel. Based on the results of this program, the feature-based system may be useful as a supplementary method of identifying IGSCC indications. When used in conjunction with existing methods and techniques, it could improve the accuracy of IGSCC identification

  2. Evaluation of bio-remediation technologies for PAHs contaminated soils

    International Nuclear Information System (INIS)

    Garcia Frutos, F.J.; Diaz, J.; Rodriguez, V.; Escolano, O.; Garcia, S.; Perez, R.; Martinez, R.; Oromendia, R.

    2005-01-01

    Natural attenuation is a new concept related to polluted soil remediation. Can be understood like an 'in situ' bio-remediation process with low technical intervention. This low intervention may be in order to follow the behaviour of pollutants 'monitored natural attenuation' or include an optimisation process to improve biological remediation. The use of this technology is a fact for light hydrocarbon polluted soil, but few is known about the behaviour of polycyclic aromatic hydrocarbons (PAHs) in this process. PAHs are more recalcitrant to bio-remediation due to their physic-chemical characteristics, mainly hydrophobicity and electrochemical stability. PAHs are a kind of pollutants widely distributed in the environment, not only in the proximity of the source. This linked to the characteristics of some of them related to toxicity and mutagenicity implies its inclusion as target compounds from an environmental point of view. Their low availability, solubility and the strong tendency to bind to soil particle, especially to the organic phase affect PAHs biological mineralisation. So, if the pollutant is not available to microorganisms it can not be bio-degraded. Bioavailability can be assessed form several but complementary points of view: physico-chemical and biological. First including the term availability and the second to point out the capacity of soil microorganisms to mineralize PAHs. Availability and Bio-degradability must be determined, as well as the presence and activity of specific degraders among the soil organisms, once settled these points is necessary to study the biological requirements to optimise biodegradation kinetics of these compounds. In this work we present a study carried out on a soil, contaminated by PAHs, the study includes three main topics: bioavailability assessment (both term availability and bio-degradability), bio-remediation assessment, once optimised conditions for natural attenuation and finally a simulation of the

  3. New tools for the evaluation of daylighting strategies and technologies

    Energy Technology Data Exchange (ETDEWEB)

    Papamichael, K.; Hitchcock, R.; Ehrlich, C.; Carroll, B.

    1998-03-01

    The use of daylight for the illumination of building interiors has the potential to enhance the quality of the environment while providing opportunities to save energy by replacing or supplementing electric lighting. Moreover, it has the potential to reduce heating and cooling loads, which offer additional energy saving opportunities as well as reductions in HVAC equipment sizing and cost. All of these benefits, however, assume proper use of daylighting strategies and technologies, whose performance depends on the context of their application. On the other hand, improper use can have significant negative effects on both comfort and energy requirements, such as increased glare and cooling loads. To ensure proper use, designers need design tools that model the dynamic nature of daylight and accurately predict performance with respect to a multitude of performance criteria, extending beyond comfort and energy to include aesthetics, cost, security, safety, etc.

  4. Public-Interest Benefit Evaluation of Partial- Upgrading Technology

    Directory of Open Access Journals (Sweden)

    G. Kent Fellows

    2017-01-01

    Full Text Available Approximately 60 per cent of Alberta’s oil sands production is non-upgraded bitumen which, after being mixed with a diluting agent (diluent to allow transport, is exported. A popular view within Alberta — and particularly among Albertan politicians — is that a much larger share of oil sands bitumen should be upgraded in the province. However, without public subsidies or government underwriting, it is uneconomic to build and operate new facilities in Alberta to fully upgrade the bitumen into synthetic crude oil. But there are new partial upgrading technologies being developed that, subject to successful testing at a larger (commercial pilot scale, can prove to be not only economic in Alberta, but also generate large social and economic benefits for the province. The advantages include a much smaller capital investment, a significant increase in the value of the product and market for the product and, even more importantly, a dramatic reduction in the need for large amounts of expensive diluent to transport the product to market. Indeed, the only diluent required will be that to move the bitumen from the production site to the partial upgrader and this can be continually recycled. The market for the synthetic crude oil produced by full upgrading is only getting tougher. Any Alberta bitumen fully upgraded here would compete closely with the rapidly expanding supply of light U.S. unconventional oil. Partial upgrading does not upgrade bitumen to a light crude, but to something resembling more of a medium or heavy crude, and at a lower cost per barrel than full upgrading. Unlike in the increasingly crowded light-crude market, the Alberta Royalty Review Advisory Panel recognized that currently there are gaps in several North American refineries that could be filled by this partially upgraded Alberta oil. A partial upgrader serving that less-competitive market not only appears to hold the potential for investors to make attractive returns in the

  5. Evaluating the technical aspects of mixed waste treatment technologies

    International Nuclear Information System (INIS)

    Bagaasen, L.M.; Scott, P.A.

    1992-10-01

    This report discusses treatment of mixed wastes which is thought to be more complicated than treatment of either hazardous or radioactive wastes. In fact, the treatment itself is no more complicated: however, the regulations that define acceptability of the final waste disposal system are significantly more entangled, and sometimes in apparent conflict. This session explores the factors that influence the choice of waste treatment technologies, and expands on some of the limitations to their application. The objective of the presentation is to describe the technical factors that influence potential treatment processes and the ramifications associated with particular selections (for example, the generation of secondary waste streams). These collectively provide a framework for making informed treatment process selections

  6. Economical evaluation on spent fuel storage technology away from reactor

    International Nuclear Information System (INIS)

    Itoh, Chihiro; Nagano, Koji; Saegusa, Toshiari

    2000-01-01

    Concerning the spent fuel storage away from reactor, economical comparison was carried out between metal cask and water pool storage technology. The economic index was defined by levelized cost (Unit storage cost) calculated on the assumption that the storage cost is paid at the receipt of the spent fuel at the storage facility. It is found that the cask storage is economical for small and large storage capacity. Unit storage cost of pool storage, however, is getting close to that of cask storage in case of storage capacity of 10,000 ton. Then, the unit storage cost is converted to power generation cost using data of the burn up of the fuel, etc. The cost is obtained as yen 0.09/kWh and yen 0. 15/kWh for cask storage and pool storage, respectively in case of the capacity of 5,000 tonU and the cooling time of 5 years. (author)

  7. Letter report: Evaluation of dryer/calciner technologies for testing

    International Nuclear Information System (INIS)

    Sevigny, G.

    1996-02-01

    This letter report describes some past experiences on the drying and calcination of radioactive materials or corresponding simulants; and the information needed from testing. The report also includes an assessment of informational needs including possible impacts to a full-scale plant. This includes reliability, maintenance, and overall size versus throughput. Much of the material was previously compiled and reported by Mike Elliott of PNL open-quotes Melter Performance Assessmentclose quotes and Larry Eisenstatt of SEG on contract to WHC in a letter to Rod Powell. Also, an annotated bibliography was prepared by Reagan Seymour of WHC. Descriptions of the drying and calciner technologies, development status, advantages and disadvantages of using a WFE or calciner, and recommendations for future testing are discussed in this report

  8. Barriers and facilitators influencing ethical evaluation in health technology assessment.

    Science.gov (United States)

    Assasi, Nazila; Schwartz, Lisa; Tarride, Jean-Eric; O'Reilly, Daria; Goeree, Ron

    2015-01-01

    The objective of this study was to explore barriers and facilitators influencing the integration of ethical considerations in health technology assessment (HTA). The study consisted of two complementary approaches: (a) a systematic review of the literature; and (b) an eighteen-item online survey that was distributed to fifty-six HTA agencies affiliated with the International Network of Agencies for Health Technology Assessment. The review identified twenty-six relevant articles. The most often cited barriers in the literature were: scarcity, heterogeneity and complexity of ethical analysis methods; challenges in translating ethical analysis results into knowledge that is useful for decision makers; and lack of organizational support in terms of required expertise, time and financial resources. The most frequently cited facilitators included: usage of value-based appraisal methods, stakeholder and public engagement, enhancement of practice guidelines, ethical expertise, and educational interventions. Representatives of twenty-six (46.5 percent) agencies from nineteen countries completed the survey. A median of 10 percent (interquartile range, 5 percent to 50 percent) of the HTA products produced by the agencies was reported to include an assessment of ethical aspects. The most commonly perceived barriers were: limited ethical knowledge and expertise, insufficient time and resources, and difficulties in finding ethical evidence or using ethical guidelines. Educational interventions, demand by policy makers, and involvement of ethicists in HTA were the most commonly perceived facilitators. Our results emphasize the importance of simplification of ethics methodology and development of good practice guidelines in HTA, as well as capacity building for engaging HTA practitioners in ethical analyses.

  9. Evaluation of second-generation central receiver technologies

    International Nuclear Information System (INIS)

    Kolb, G.L.; Chavez, J.M.; Klimas, P.; Meinecke, W.; Becker, M.; Kiera, M.

    1993-01-01

    This paper summarizes the results of a study performed by the US and Germany to assess the technical and economic potential of central receiver power plants and to identify the necessary research and development (R ampersand D) activities required to reach demonstration and commercialization. Second generation power plant designs, employing molten-salt and volumetric-air receivers, were assessed at the size of 30 and 100 MWe. The study developed a common guideline and used data from previous system tests and studies. The levelized-energy costs for the second generation plants were estimated and found to be competitive with costs from fossil-fueled power plants. Potential for further cost reductions exists if technical improvements can be introduced successfully in the long term. Additionally, the study presents results of plant reliability and uncertainty analyses. Mid- and long-term technical potentials are described, as well as recommendations for the R ampersand D activities needed to reach the goal of large-scale commercialization. The results of this study have already helped direct research in the US and Europe. For example, the favorable potential for these technologies has led to the Solar Two molten-salt project in the US and the TSA volumetric receiver test in Spain. In addition, early analysis conducted within this study indicated that an advanced thermal storage medium was necessary to achieve favorable economics for the air plant. This led to the design of the thermal storage system currently being tested in Spain. In summary, each of the investigated receiver technologies has mid- and long-term potential for improving plant performance and reducing capital and energy costs (resulting in less than 10 cts/kWh given excellent insolation conditions) in an environmentally safe way and largely independent of fossil-fuel prices

  10. Evaluating the income and employment impacts of gas cooling technologies

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, P.J. [Oak Ridge National Lab., TN (United States); Laitner, S.

    1995-03-01

    The purpose of this study is to estimate the potential employment and income benefits of the emerging market for gas cooling products. The emphasis here is on exports because that is the major opportunity for the U.S. heating, ventilating, and air-conditioning (HVAC) industry. But domestic markets are also important and considered here because without a significant domestic market, it is unlikely that the plant investments, jobs, and income associated with gas cooling exports would be retained within the United States. The prospects for significant gas cooling exports appear promising for a variety of reasons. There is an expanding need for cooling in the developing world, natural gas is widely available, electric infrastructures are over-stressed in many areas, and the cost of building new gas infrastructure is modest compared to the cost of new electric infrastructure. Global gas cooling competition is currently limited, with Japanese and U.S. companies, and their foreign business partners, the only product sources. U.S. manufacturers of HVAC products are well positioned to compete globally, and are already one of the faster growing goods-exporting sectors of the U.S. economy. Net HVAC exports grew by over 800 percent from 1987 to 1992 and currently exceed $2.6 billion annually (ARI 1994). Net gas cooling job and income creation are estimated using an economic input-output model to compare a reference case to a gas cooling scenario. The reference case reflects current policies, practices, and trends with respect to conventional electric cooling technologies. The gas cooling scenario examines the impact of accelerated use of natural gas cooling technologies here and abroad.

  11. Technical and economic evaluation of selected technologies of the Landfill Characterization System

    Energy Technology Data Exchange (ETDEWEB)

    Floran, R.J.

    1993-12-31

    In 1992 and 1993, numerous innovative and emerging technologies for characterizing metal and mixed waste contaminants and their migration beneath landfills in and environments were field tested at Sandia`s Chemical Waste Landfill. Many of these technologies are being evaluated as part of the Landfill Characterization System (LCS). The LCS emphasizes minimally intrusive technologies and downhole sensors that strive to be cheaper, better, safer and faster than conventional methods. Major aims of the LCS are to demonstrate, test and evaluate these technologies, and determine whether substantial cost saving over traditional baseline methods can be realized. To achieve these goals, the LCS uses an integrated systems approach that stresses the application of complementary and compatible technologies. Successful field demonstrations combined with favorable economics, will greatly assist the commercialization of these technologies to the private sector and to Environmental Restoration groups throughout the DOE Complex. In this paper, a technical and economic evaluation of selected technologies that comprise the LCS is presented. Because sampling and analysis is the most costly part of a characterization effort, the economic evaluation presented here focuses specifically on these activities. LCS technologies discussed include the ``Smart Sampling Methodology`` and two field screening analytical methods, stripping voltammetry and x-ray fluorescence.

  12. Assessing Community Informatics: A Review of Methodological Approaches for Evaluating Community Networks and Community Technology Centers.

    Science.gov (United States)

    O'Neil, Dara

    2002-01-01

    Analyzes the emerging community informatics evaluation literature to develop an understanding of the indicators used to gauge project impacts in community networks and community technology centers. The study finds that community networks and community technology center assessments fall into five key areas: strong democracy; social capital;…

  13. Workshop tools and methodologies for evaluation of energy chains and for technology perspective

    Energy Technology Data Exchange (ETDEWEB)

    Appert, O. [Institut Francais du Petrole (IFP), 92 - Rueil-Malmaison (France); Maillard, D. [Energy and Raw Materials, 75 - Paris (France); Pumphrey, D. [Energy Cooperation, US Dept. of Energy (United States); Sverdrup, G.; Valdez, B. [National Renewable Energy Laboratory, Golden, CO (United States); Schindler, J. [LB-Systemtechnik (LBST), GmbH, Ottobrunn (Germany); His, St.; Rozakis, St. [Centre International de Recherche sur Environnement Developpement (CIRED), 94 - Nogent sur Marne (France); Sagisaka, M. [LCA Research Centre (Japan); Bjornstad, D. [Oak Ridge National Laboratory, Oak Ridge, Tennessee (United States); Madre, J.L. [Institut National de Recherche sur les Transports et leur Securite, 94 - Arcueil (France); Hourcade, J.Ch. [Centre International de Recherche sur l' Environnement le Developpement (CIRED), 94 - Nogent sur Marne (France); Ricci, A.; Criqui, P.; Chateau, B.; Bunger, U.; Jeeninga, H. [EU/DG-R (Italy); Chan, A. [National Research Council (Canada); Gielen, D. [IEA-International Energy Associates Ltd., Fairfax, VA (United States); Tosato, G.C. [Energy Technology Systems Analysis Programme (ETSAP), 75 - Paris (France); Akai, M. [Agency of Industrial Science and technology (Japan); Ziesing, H.J. [Deutsches Institut fur Wirtschaftsforschung, DIW Berlin (Germany); Leban, R. [Conservatoire National des Arts et Metiers (CNAM), 75 - Paris (France)

    2005-07-01

    The aims of this workshop is to better characterize the future in integrating all the dynamic interaction between the economy, the environment and the society. It offers presentations on the Hydrogen chains evaluation, the micro-economic modelling for evaluation of bio-fuel options, life cycle assessment evolution and potentialities, the consumer valuation of energy technologies attributes, the perspectives for evaluation of changing behavior, the incentive systems and barriers to social acceptability, the internalization of external costs, the endogenous technical change in long-tem energy models, ETSAP/technology dynamics in partial equilibrium energy models, very long-term energy environment modelling, ultra long-term energy technology perspectives, the socio-economic toolbox of the EU hydrogen road-map, the combined approach using technology oriented optimization and evaluation of impacts of individual policy measures and the application of a suite of basic research portfolio management tools. (A.L.B.)

  14. Federal Highway Administration research and technology evaluation final report : Eco-Logical

    Science.gov (United States)

    2018-03-01

    This report documents an evaluation of Federal Highway Administrations (FHWA) Research and Technology Programs activities on the implementation of the Eco-Logical approach by State transportation departments and metropolitan planning organizati...

  15. Evaluation of the application of BIM technology based on PCA - Q Clustering Algorithm and Choquet Integral

    Directory of Open Access Journals (Sweden)

    Wei Xiaozhao

    2016-03-01

    Full Text Available For the development of the construction industry, the construction of data era is approaching, BIM (building information model with the actual needs of the construction industry has been widely used as a building information clan system software, different software for the practical application of different maturity, through the expert scoring method for the application of BIM technology maturity index mark, establish the evaluation index system, using PCA - Q clustering algorithm for the evaluation index system of classification, comprehensive evaluation in combination with the Choquet integral on the classification of evaluation index system, to achieve a reasonable assessment of the application of BIM technology maturity index. To lay a foundation for the future development of BIM Technology in various fields of construction, at the same time provides direction for the comprehensive application of BIM technology.

  16. TECHNOLOGY EVALUATION REPORT: TORONTO HARBOUR COMMISSIONERS (THC) SOIL RECYCLE TREATMENT TRAIN. Project Summary

    Science.gov (United States)

    A demonstration of the Toronto Harbour Commissioners' (THC) Soil Recycle Treatment Train was performed under the Superfund Innovative Technology Evaluation (SITE) Program at a pilot plant facility in Toronto, Ontario, Canada. The Soil Recycle Treatment Train, which consists of s...

  17. Manual for research, development and technology program and project evaluations : final report.

    Science.gov (United States)

    2016-04-01

    This manual provides the Federal Railroad Administrations (FRA) Office of Research, Development and Technology (RD&T) a : framework, standards, and procedures for planning, conducting, reporting, and using sound evaluations of RD&Ts projects fo...

  18. Comparative evaluation by lifecycle and risk assessment of agrobiological and technological routes of production

    NARCIS (Netherlands)

    Moll, H.C.; Schoot Uiterkamp, A.J.M.

    The application of lifecycle and risk assessment methodologies for environmental assessment of agricultural products is growing and produces interesting results. This allows comparisons between agricultural and technological routes of production. An evaluation of such assessments provides increased

  19. Low-rank coal study: national needs for resource development. Volume 3. Technology evaluation

    Energy Technology Data Exchange (ETDEWEB)

    1980-11-01

    Technologies applicable to the development and use of low-rank coals are analyzed in order to identify specific needs for research, development, and demonstration (RD and D). Major sections of the report address the following technologies: extraction; transportation; preparation, handling and storage; conventional combustion and environmental control technology; gasification; liquefaction; and pyrolysis. Each of these sections contains an introduction and summary of the key issues with regard to subbituminous coal and lignite; description of all relevant technology, both existing and under development; a description of related environmental control technology; an evaluation of the effects of low-rank coal properties on the technology; and summaries of current commercial status of the technology and/or current RD and D projects relevant to low-rank coals.

  20. Threshold evaluations of industrial conservation technologies run in ISTUM base case

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-20

    The results of threshold evaluations performed on several INDUS technologies which were competed with other new and conventional industrial technologies in the Industrial Sector Technology Use Model (ISTUM) developed by EEA are summarized. The ISTUM model is briefly described and includes the input technology categories and service sectors treated in the model, and the solution technique used. The input data specifications are summaried for the Industry Conservation Technologies run in the ISTUM base case. Included are listings of the technologies run in ISTUM, those not run in ISTUM, and a discussion of the absence of a retrofit algorithm in ISTUM and its resulting impact on conservation technologies. Also included is a discussion of the capital cost variability, maximum market fraction, size and load factors and data quality specifications for the conservation technologies in ISTUM. The results of the ISTUM base case run are presented, describing the important limitations and constraints of the base case run, the key assumptions inherent in the base case, and the summarized results of energy savings by year for different generic technology types. The technology characterization data developed for each INDUS technology run in the ISTUM base case are discussed in detail. The descriptions include the calculations and assumptions used in determining the service demand displacement, equipment cost, maximum market fraction, data quality, and size and load range for each technology.

  1. Evaluation of Alternative Technologies to Supply Drinking Water to Marines in Forward Deployed Locations

    Science.gov (United States)

    2010-03-01

    Afghanistan.” 2009. http://www.coleparmer.com/techinfo/techinfo.asp?htmlfile= water - afghanistan.htm&ID=964. Christ- wasser . “RO, EDI and optional UF...Cover, Single-Author Thesis EVALUATION OF ALTERNATIVE TECHNOLOGIES TO SUPPLY DRINKING WATER TO MARINES IN FORWARD DEPLOYED...AFIT/GES/ENV/10-M02 EVALUATION OF ALTERNATIVE TECHNOLOGIES TO SUPPLY DRINKING WATER TO MARINES IN FORWARD DEPLOYED

  2. Impact of Digital Tooth Preparation Evaluation Technology on Preclinical Dental Students' Technical and Self-Evaluation Skills.

    Science.gov (United States)

    Gratton, David G; Kwon, So Ran; Blanchette, Derek; Aquilino, Steven A

    2016-01-01

    The aim of this study was to evaluate the effect of digital tooth preparation imaging and evaluation technology on dental students' technical abilities, self-evaluation skills, and the assessment of their simulated clinical work. A total of 80 second-year students at one U.S. dental school were assigned to one of three groups: control (n=40), E4D Compare (n=20), and Sirona prepCheck (n=20). Students in the control group were taught by traditional teaching methodologies, and the technology-assisted groups received both traditional training and supplementary feedback from the corresponding digital system. Three outcomes were measured: faculty technical score, self-evaluation score, and E4D Compare scores at 0.30 mm tolerance. Correlations were determined between the groups' scores from visual assessment and self-evaluation and between the visual assessment and digital scores. The results showed that the visual assessment and self-evaluation scores did not differ among groups (p>0.05). Overall, correlations between visual and digital assessment scores were modest though statistically significant (5% level of significance). These results suggest that the use of digital tooth preparation evaluation technology did not impact the students' prosthodontic technical and self-evaluation skills. Visual scores given by faculty and digital assessment scores correlated moderately in only two instances.

  3. Traditional fish processing: technology, quality development and evaluation

    International Nuclear Information System (INIS)

    Nketsia-Tabiri, J.

    1994-01-01

    Traditional fish processing technologies are important in the preservation and utilization of fish in many developing countries. These technologies as well as the quality of the products arc poorly defined and understood. This study therefore investigated the production, quality characteristics and utilization of traditional cured fish products using field surveys and laboratory techniques. It was found that simple traditional technologies for smoking, salting and drying are used to process fish in Ghana; infrastructural requirements for traditional fish processing have high local material input. The cured fish products have distinct sensory, physico-chemical properties and variable storage characteristics. Processors' perceptions of important quality attributes of cured fish products were linked to storage, marketing and other product delivery characteristics. Consumers' perceptions and expectations of desirable quality attributes however were found to he dependent upon the type of cured fish product and the food in which it is used. Cost was found to be the most important factor influencing the utilization of animal protein foods; other factors were nutritional quality, beliefs and food habits. Animal protein consumers showed a high preference for fish in general and cured fish products in particular. U sing central composite rotatable design for k = 3, representing salting time (0 - 24), drying temperature (40°C - 60°C) and drying time (6 - 20 hours), equations for predicting objective and subjective quality indices were developed. The critical salting time for attaining minimum moisture content were 20.5, 12 and 8.5 hours respectively for products dried at 40°C, 50°C and 60°C. At each salting time, the mean hardness score was dependent on the drying temperature and drying time whilst the mean colour and overall acceptability scores were influenced by drying temperature. It was found that the long salting time (24-72 hours) and drying time (5

  4. Toward a Comprehensive Framework for Evaluating the Core Integration Features of Enterprise Integration Middleware Technologies

    Directory of Open Access Journals (Sweden)

    Hossein Moradi

    2013-01-01

    Full Text Available To achieve greater automation of their business processes, organizations face the challenge of integrating disparate systems. In attempting to overcome this problem, organizations are turning to different kinds of enterprise integration. Implementing enterprise integration is a complex task involving both technological and business challenges and requires appropriate middleware technologies. Different enterprise integration solutions provide various functions and features which lead to the complexity of their evaluation process. To overcome this complexity, appropriate tools for evaluating the core integration features of enterprise integration solutions is required. This paper proposes a new comprehensive framework for evaluating the core integration features of both intra-enterprise and inter-enterprise Integration's enabling technologies, which simplify the process of evaluating the requirements met by enterprise integration middleware technologies.The proposed framework for evaluating the core integration features of enterprise integration middleware technologies was enhanced using the structural and conceptual aspects of previous frameworks. It offers a new schema for which various enterprise integration middleware technologies are categorized in different classifications and are evaluated based on their supporting level for the core integration features' criteria. These criteria include the functional and supporting features. The proposed framework, which is a revised version of our previous framework in this area, has developed the scope, structure and content of the mentioned framework.

  5. An evaluation of health information technology outsourcing success.

    Science.gov (United States)

    Malovec, Shannon N; Borycki, Elizabeth M; Kushniruk, Andre W

    2015-01-01

    Outsourcing involves contracting out functions performed by an organization to another organization. Many healthcare organizations are exploring outsourcing as a way to address demands for health information technology (HIT). This study researches the success of outsourcing in the health informatics industry in Canada. The study is designed to help understand whether outsourcing four functions of HIT (i.e. development, implementation, operations, and maintenance) can prove successful for an organization. Findings demonstrate that outsourcing these four functions occurs in Canada; however, the research from the semi-structured interviews finds that operations and maintenance may be more commonly outsourced in Canada, over development and implementation functions. Despite this, findings from this research suggest that outsourcing development and implementation may offer more benefits and fewer challenges than outsourcing operations and maintenance. The research also finds that there can be benefits of outsourcing, such as gaining access to expertise and improving service levels. A weakness of outsourcing may be that internal knowledge is lost and having to manage the change required from outsourcing. The study proposes that there are many factors that need to be considered when outsourcing to ensure it is successful.

  6. Emerging technologies with potential for objectively evaluating speech recognition skills.

    Science.gov (United States)

    Rawool, Vishakha Waman

    2016-01-01

    Work-related exposure to noise and other ototoxins can cause damage to the cochlea, synapses between the inner hair cells, the auditory nerve fibers, and higher auditory pathways, leading to difficulties in recognizing speech. Procedures designed to determine speech recognition scores (SRS) in an objective manner can be helpful in disability compensation cases where the worker claims to have poor speech perception due to exposure to noise or ototoxins. Such measures can also be helpful in determining SRS in individuals who cannot provide reliable responses to speech stimuli, including patients with Alzheimer's disease, traumatic brain injuries, and infants with and without hearing loss. Cost-effective neural monitoring hardware and software is being rapidly refined due to the high demand for neurogaming (games involving the use of brain-computer interfaces), health, and other applications. More specifically, two related advances in neuro-technology include relative ease in recording neural activity and availability of sophisticated analysing techniques. These techniques are reviewed in the current article and their applications for developing objective SRS procedures are proposed. Issues related to neuroaudioethics (ethics related to collection of neural data evoked by auditory stimuli including speech) and neurosecurity (preservation of a person's neural mechanisms and free will) are also discussed.

  7. Integrated Technology Air Cleaners (ITAC): Design and Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, William J.; Cohn, Sebastian; Destaillats, Hugo; Henzel, Victor; Sidheswaran, Meera; Sullivan, Douglas P.

    2013-09-13

    The primary objective of this project was to design, build, and test an air cleaner for residential use with the potential to substantially improve indoor air quality, or maintain indoor air quality unchanged, when outdoor air ventilation rates are reduced to save energy. Two air cleaners were designed and fabricated. The design targets for airflow rate, fan power, and projected cost were met. In short term laboratory studies, both units performed as expected; however, during field studies in homes, the formaldehyde removal performance of the air cleaners was much lower than expected. In subsequent laboratory studies, incomplete decomposition of some indoor air volatile organic compounds, with formaldehyde as a product of partial decomposition of volatile organic compounds, was confirmed as the explanation for the poor formaldehyde removal performance in the field studies. The amount of formaldehyde produced per unit of decomposition of other volatile organic compounds was substantially diminished by increasing the amount of catalyst on the filter and also by decreasing the air velocity. Together, these two measures reduced formaldehyde production, per unit destruction of other volatile organic compounds, by a factor of four, while increasing the removal efficiency of volatile organic compounds by a factor of 1.4. A company with a southern California office is conducting studies in conjunction with Lawrence Berkeley National Laboratory, with the goal of incorporating the ITAC catalytic air cleaning technology in their future commercial products.

  8. Economic evaluation of GPS technology in Serbian agriculture

    Directory of Open Access Journals (Sweden)

    Marković Dragan

    2013-01-01

    Full Text Available This paper examined the level of savings in the application of the most modern technical systems for satellite guidance and control over performing agricultural operations throughout the season. The exemplary property was Agricultural Corporation Belgrade (PKB, which covers about 21.000 hectares of arable land. The effects of plot shape and direction of movement of tractor-attachment units in calculating the savings from reduced overlapping of adjacent passes were studied. The analysis was carried out of savings per crop (maize, wheat, soybean, sugar beet and alfalfa and the operations for each crop separately, based on the manufacturing technology applied to an exemplary property. Detailed data are shown only for wheat and barley. Comparing the achieved level of savings, the application of guidance for the type of the most economically viable operations was found as well as the needed equipment level of guidance devices and management. In particular, the analysis involved the functional dependence of the economic savings in fuel and inputs for the operations such as mineral fertilizers distribution and chemical plant protection. Tabulated are the data estimates for the degree of anticipated savings for operations related to the five analyzed crops.

  9. ROC Analysis for Evaluation of Radiation Biodosimetry Technologies

    International Nuclear Information System (INIS)

    Williams, Benjamin B.; Swartz, Harold M.; Flood, Ann Barry; Demidenko, Eugene

    2016-01-01

    Receiver operating characteristic (ROC) analysis is a fundamental tool used for the evaluation and comparison of diagnostic systems that provides estimates of the combinations of sensitivity and specificity that can be achieved with a given technique. Along with critical considerations of practical limitations, such as throughput and time to availability of results, ROC analyses can be applied to provide meaningful assessments and comparisons of available biodosimetry methods. Accordingly, guidance from the Food and Drug Administration to evaluate biodosimetry devices recommends using ROC analysis. However, the existing literature for the numerous biodosimetry methods that have been developed to address the needs for triage either do not contain ROC analyses or present ROC analyses where the dose distributions of the study samples are not representative of the populations to be screened. The use of non-representative sample populations can result in a significant spectrum bias, where estimated performance metrics do not accurately characterize the true performance under real-world conditions. Particularly, in scenarios where a large group of people is screened because they were potentially exposed in a large-scale radiation event, directly measured population data do not exist. However, a number of complex simulations have been performed and reported in the literature that provide estimates of the required dose distributions. Based on these simulations and reported data about the output and uncertainties of biodosimetry assays, we illustrate how ROC curves can be generated that incorporate a realistic representative sample. A technique to generate ROC curves for biodosimetry data is presented along with representative ROC curves, summary statistics and discussion based on published data for triage-ready electron paramagnetic resonance in vivo tooth dosimetry, the dicentric chromosome assay and quantitative polymerase chain reaction assay. We argue that this

  10. Remote Excavation System technology evaluation report: Buried Waste Robotics Program

    International Nuclear Information System (INIS)

    1993-09-01

    This document describes the results from the Remote Excavation System demonstration and testing conducted at the Idaho National Engineering Laboratory during June and July 1993. The purpose of the demonstration was to ascertain the feasibility of the system for skimming soil and removing various types of buried waste in a safe manner and within all regulatory requirements, and to compare the performances of manual and remote operation of a backhoe. The procedures and goals of the demonstration were previously defined in The Remote Excavation System Test Plan, which served as a guideline for evaluating the various components of the system and discussed the procedures used to conduct the tests

  11. Cooperative Telerobotic Retrieval system Phase 1 technology evaluation report

    Energy Technology Data Exchange (ETDEWEB)

    Hyde, R.A.; Croft, K.M.

    1995-03-01

    This document describes the results from the Cooperative Telerobotic Retrieval demonstration and testing conducted at the Idaho National Engineering Laboratory during December 1994 and January 1995. The purpose of the demonstration was to ascertain the feasibility of the system for deploying tools both independently and cooperatively for supporting remote characterization and removal of buried waste in a safe manner and in compliance with all regulatory requirements. The procedures and goals of the demonstration were previously defined in the Cooperative Telerobotic Retrieval System Test Plan for Fiscal Year 1994, which served as a guideline for evaluating the system.

  12. Evaluation of appropriate technologies for grey water treatments and reuses.

    Science.gov (United States)

    Li, Fangyue; Wichmann, Knut; Otterpohl, Ralf

    2009-01-01

    As water is becoming a rare resource, the onsite reuse and recycling of grey water is practiced in many countries as a sustainable solution to reduce the overall urban water demand. However, the lack of appropriate water quality standards or guidelines has hampered the appropriate grey water reuses. Based on literature review, a non-potable urban grey water treatment and reuse scheme is proposed and the treatment alternatives for grey water reuse are evaluated according to the grey water characteristics, the proposed standards and economical feasibility.

  13. Seat pressure measurement technologies: considerations for their evaluation.

    Science.gov (United States)

    Gyi, D E; Porter, J M; Robertson, N K

    1998-04-01

    Interface pressure measurement has generated interest in the automotive industry as a technique which could be used in the prediction of driver discomfort for various car seat designs, and provide designers and manufacturers with rapid information early on in the design process. It is therefore essential that the data obtained are of the highest quality, relevant and have some quantitative meaning. Exploratory experimental work carried out with the commercially available Talley Pressure Monitor is outlined. This led to a better understanding of the strengths and weaknesses of this system and the re-design of the sensor matrix. Such evaluation, in the context of the actual experimental environment, is considered essential.

  14. Development of a Technology Transfer Score for Evaluating Research Proposals: Case Study of Demand Response Technologies in the Pacific Northwest

    Science.gov (United States)

    Estep, Judith

    Investment in Research and Development (R&D) is necessary for innovation, allowing an organization to maintain a competitive edge. The U.S. Federal Government invests billions of dollars, primarily in basic research technologies to help fill the pipeline for other organizations to take the technology into commercialization. However, it is not about just investing in innovation, it is about converting that research into application. A cursory review of the research proposal evaluation criteria suggests that there is little to no emphasis placed on the transfer of research results. This effort is motivated by a need to move research into application. One segment that is facing technology challenges is the energy sector. Historically, the electric grid has been stable and predictable; therefore, there were no immediate drivers to innovate. However, an aging infrastructure, integration of renewable energy, and aggressive energy efficiency targets are motivating the need for research and to put promising results into application. Many technologies exist or are in development but the rate at which they are being adopted is slow. The goal of this research is to develop a decision model that can be used to identify the technology transfer potential of a research proposal. An organization can use the model to select the proposals whose research outcomes are more likely to move into application. The model begins to close the chasm between research and application--otherwise known as the "valley of death". A comprehensive literature review was conducted to understand when the idea of technology application or transfer should begin. Next, the attributes that are necessary for successful technology transfer were identified. The emphasis of successful technology transfer occurs when there is a productive relationship between the researchers and the technology recipient. A hierarchical decision model, along with desirability curves, was used to understand the complexities of the

  15. DOE evaluates nine alternative thermal technologies for treatment of mixed waste

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    In June 1993, the U.S. Department of Energy's (DOE's) Office of Technology Development commissioned a study to evaluate 19 thermal technologies for treating DOE's mixed waste. The study was divided into two phases: Phase I evaluated ten conventional incineration techniques (primarily rotary kiln), and Phase II looked at nine innovative, alternative thermal treatment technologies. The treatment processes were evaluated as part of an integrated waste treatment system, which would include all of the facilities, equipment, and methods required to treat and dispose DOE mixed waste. The relative merits and life-cycle costs were then developed for each of the 19 waste treatment systems evaluated. The study also identified the additional research and development, demonstration, and testing/evaluation steps that would be necessary for the waste treatment systems to successfully treat DOE mixed waste. 3 tabs., 2 refs

  16. Development and application of a probabilistic evaluation method for advanced process technologies

    Energy Technology Data Exchange (ETDEWEB)

    Frey, H.C.; Rubin, E.S.

    1991-04-01

    The objective of this work is to develop and apply a method for research planning for advanced process technologies. To satisfy requirements for research planning, it is necessary to: (1) identify robust solutions to process design questions in the face of uncertainty to eliminate inferior design options; (2) identify key problem areas in a technology that should be the focus of further research to reduce the risk of technology failure; (3) compare competing technologies on a consistent basis to determine the risks associated with adopting a new technology; and (4) evaluate the effects that additional research might have on comparisons with conventional technology. An important class of process technologies are electric power plants. In particular, advanced clean coal technologies are expected to play a key role in the energy and environmental future of the US, as well as in other countries. Research planning for advanced clean coal technology development is an important part of energy and environmental policy. Thus, the research planning method developed here is applied to case studies focusing on a specific clean coal technology. The purpose of the case studies is both to demonstrate the research planning method and to obtain technology-specific conclusions regarding research strategies.

  17. Development and application of a probabilistic evaluation method for advanced process technologies. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Frey, H.C.; Rubin, E.S.

    1991-04-01

    The objective of this work is to develop and apply a method for research planning for advanced process technologies. To satisfy requirements for research planning, it is necessary to: (1) identify robust solutions to process design questions in the face of uncertainty to eliminate inferior design options; (2) identify key problem areas in a technology that should be the focus of further research to reduce the risk of technology failure; (3) compare competing technologies on a consistent basis to determine the risks associated with adopting a new technology; and (4) evaluate the effects that additional research might have on comparisons with conventional technology. An important class of process technologies are electric power plants. In particular, advanced clean coal technologies are expected to play a key role in the energy and environmental future of the US, as well as in other countries. Research planning for advanced clean coal technology development is an important part of energy and environmental policy. Thus, the research planning method developed here is applied to case studies focusing on a specific clean coal technology. The purpose of the case studies is both to demonstrate the research planning method and to obtain technology-specific conclusions regarding research strategies.

  18. 75 FR 13305 - Comment Request for Information Collection for Evaluation of the Technology-Based Learning Grants...

    Science.gov (United States)

    2010-03-19

    ... Collection for Evaluation of the Technology-Based Learning Grants: New Collection AGENCY: Employment and... Technology- Based Learning Grants Evaluation. A copy of the proposed information collection request (ICR) can... INFORMATION: I. Background The Evaluation of the Technology-Based Learning (TBL) Grants is a two-year...

  19. Research on the use of data fusion technology to evaluate the state of electromechanical equipment

    Science.gov (United States)

    Lin, Lin

    2018-04-01

    Aiming at the problems of different testing information modes and the coexistence of quantitative and qualitative information in the state evaluation of electromechanical equipment, the paper proposes the use of data fusion technology to evaluate the state of electromechanical equipment. This paper introduces the state evaluation process of mechanical and electrical equipment in detail, uses the D-S evidence theory to fuse the decision-making layers of mechanical and electrical equipment state evaluation and carries out simulation tests. The simulation results show that it is feasible and effective to apply the data fusion technology to the state evaluation of the mechatronic equipment. After the multiple decision-making information provided by different evaluation methods are fused repeatedly and the useful information is extracted repeatedly, the fuzziness of judgment can be reduced and the state evaluation Credibility.

  20. Technological Evaluation Report 42. Contrasting LMS Marketing Approaches

    Directory of Open Access Journals (Sweden)

    Brian Carriere

    2005-03-01

    Full Text Available The first section of this report examines the CourseCompass learning management system (LMS, made available to educators by the Pearson publishing group as a vehicle for the company’s extensive content library. The product’s features are discussed, and the implications of Pearson’s software/ textbook “bundling” policy for the integrity of course design. The second section of the report reviews Wordcircle, an open source (OS LMS provided as a free hosted service or as source code downloadable for installation on the user’s own server. The contrasting marketing approaches of these two products are discussed in the light of the increasing move by distance educators from proprietary to open source LMS products. As in previous reports in the series, the reviews are based on the six evaluation criteria of the American Society for Training and Development (ASTD: cost, complexity, control, clarity, common technical framework, and features.

  1. LCA and economic evaluation of landfill leachate and gas technologies.

    Science.gov (United States)

    Damgaard, Anders; Manfredi, Simone; Merrild, Hanna; Stensøe, Steen; Christensen, Thomas H

    2011-07-01

    Landfills receiving a mix of waste, including organics, have developed dramatically over the last 3-4 decades; from open dumps to engineered facilities with extensive controls on leachate and gas. The conventional municipal landfill will in most climates produce a highly contaminated leachate and a significant amount of landfill gas. Leachate controls may include bottom liners and leachate collection systems as well as leachate treatment prior to discharge to surface water. Gas controls may include oxidizing top covers, gas collection systems with flares or gas utilization systems for production of electricity and heat. The importance of leachate and gas control measures in reducing the overall environmental impact from a conventional landfill was assessed by life-cycle-assessment (LCA). The direct cost for the measures were also estimated providing a basis for assessing which measures are the most cost-effective in reducing the impact from a conventional landfill. This was done by modeling landfills ranging from a simple open dump to highly engineered conventional landfills with energy recovery in form of heat or electricity. The modeling was done in the waste LCA model EASEWASTE. The results showed drastic improvements for most impact categories. Global warming went from an impact of 0.1 person equivalent (PE) for the dump to -0.05 PE for the best design. Similar improvements were found for photochemical ozone formation (0.02 PE to 0.002 PE) and stratospheric ozone formation (0.04 PE to 0.001 PE). For the toxic and spoiled groundwater impact categories the trend is not as clear. The reason for this was that the load to the environment shifted as more technologies were used. For the dump landfill the main impacts were impacts for spoiled groundwater due to lack of leachate collection, 2.3 PE down to 0.4 PE when leachate is collected. However, at the same time, leachate collection causes a slight increase in eco-toxicity and human toxicity via water (0.007 E to 0

  2. In Situ Remediation Integrated Program, Evaluation and assessment of containment technology

    International Nuclear Information System (INIS)

    Gerber, M.A.; Fayer, M.J.

    1994-04-01

    The In Situ Remediation Integrated Program (ISRIP) was established by the US Department of Energy (DOE) to advance the state-of-the art of innovative in situ remediation technologies to the point of demonstration and to broaden the applicability of these technologies to the widely varying site remediation requirements throughout the DOE complex. This program complements similar ongoing integrated demonstration programs being conducted at several DOE sites. The ISRIP has been conducting baseline assessments on in situ technologies to support program planning. Pacific Northwest Laboratory conducted an assessment and evaluation of subsurface containment barrier technology in support of ISRIP's Containment Technology Subprogram. This report summarizes the results of that activity and provides a recommendation for priortizing areas in which additional research and development is needed to advance the technology to the point of demonstration in support of DOE's site restoration activities

  3. Evaluating the effectiveness of personal response system technology on millennial student learning.

    Science.gov (United States)

    McCurry, Mary K; Hunter Revell, Susan M

    2011-08-01

    As nurse educators, we must explore new technologies that capitalize on the characteristics of millennial learners. One such technology, the personal response system (PRS), is an effective way to promote active learning and increase comprehension. Few nursing studies have examined the benefits of PRS technology on student outcomes. The purpose of this study was to evaluate the effectiveness of PRS technology on learning outcomes in two sections of an undergraduate nursing research course. A crossover design compared class quiz averages between and within groups. Findings related to between and within class quiz scores were mixed, whereas the effectiveness of in-class PRS questions on paper-and-pencil quiz scores and PRS-targeted quiz items was significant. Knowledge gained from this study can be used to enhance our ability to actively engage our technologically savvy undergraduate students. By threading technology into the undergraduate curriculum, learning outcomes may be improved. Copyright 2011, SLACK Incorporated.

  4. Early economic evaluation of emerging health technologies: protocol of a systematic review

    Science.gov (United States)

    2014-01-01

    Background The concept of early health technology assessment, discussed well over a decade, has now been collaboratively implemented by industry, government, and academia to select and expedite the development of emerging technologies that may address the needs of patients and health systems. Early economic evaluation is essential to assess the value of emerging technologies, but empirical data to inform the current practice of early evaluation is limited. We propose a systematic review of early economic evaluation studies in order to better understand the current practice. Methods/design This protocol describes a systematic review of economic evaluation studies of regulated health technologies in which the evaluation is conducted prior to regulatory approval and when the technology effectiveness is not well established. Included studies must report an economic evaluation, defined as the comparative analysis of alternatives with respect to their associated costs and health consequences, and must evaluate some regulated health technology such as pharmaceuticals, biologics, high-risk medical devices, or biomarkers. We will conduct the literature search on multiple databases, including MEDLINE, EMBASE, the Centre for Reviews and Dissemination Databases, and EconLit. Additional citations will be identified via scanning reference lists and author searching. We suspect that many early economic evaluation studies are unpublished, especially those conducted for internal use only. Additionally, we use a chain-referral sampling approach to identify authors of unpublished studies who work in technology discovery and development, starting out with our contact lists and authors who published relevant studies. Citation screening and full-text review will be conducted by pairs of reviewers. Abstracted data will include those related to the decision context and decision problem of the early evaluation, evaluation methods (e.g., data sources, methods, and assumptions used to

  5. Exploring the Capability of Evaluating Technical Solutions: A Collaborative Study into the Primary Technology Classroom

    Science.gov (United States)

    Björkholm, Eva

    2014-01-01

    Within the field of technology education, evaluating technical solutions is considered as an important topic. Research indicates that pupils have difficulties in evaluating technical solutions in terms of fitness for purpose, i.e. how effective a technical solution supports its intended function. By using the learning study, which is an iterative…

  6. Evaluation of the Science, Technology, and Engineering Leadership Program, Year Two

    Science.gov (United States)

    Wolanin, Natalie L.; Wade, Julie H.

    2013-01-01

    The Office of Shared Accountability (OSA) conducted an evaluation of the implementation of the second year (2011-2012) of the Science, Technology, and Engineering Leadership Program (STELP) in Montgomery County (Maryland) Public Schools (MCPS). Funding for STELP, including the evaluation study, is provided by a grant from the Howard Hughes Medical…

  7. Evaluation of the Science, Technology, and Engineering Leadership Program, Year Three

    Science.gov (United States)

    Wolanin, Natalie; Wade, Julie

    2014-01-01

    The Office of Shared Accountability conducted an evaluation of the implementation of the third and final year (2012-2013) of the "Science, Technology, and Engineering Leadership Program" (STELP) in Montgomery County (Maryland) Public Schools (MCPS). Funding for STELP, including the evaluation study, is provided by a grant from the Howard…

  8. An Evaluative Case Study on Professional Competency of Preservice Information Technology Teachers

    Science.gov (United States)

    Kabakci Yurdakul, Isil

    2011-01-01

    The purpose of this study is to evaluate preservice Information Technology (IT) teachers' professional competency in the teaching process. The study was designed on the basis of evaluative case study. The participants of the study consisted of seven preservice IT teachers attending the department of Computer Education and Instructional…

  9. Evaluating Web 2.0 Technologies in Higher Education Using Students' Perceptions and Performance

    Science.gov (United States)

    Karvounidis, T.; Chimos, K.; Bersimis, S.; Douligeris, C.

    2014-01-01

    In this work, Web 2.0 technologies in higher education are evaluated using students' perceptions, satisfaction, performance and behaviour. The study evaluates the Web 2.0 tools as stand-alone entities as well in terms of their cross-operability and integration (confluence) to synergistic contributions towards the enhancement of student…

  10. COMPOST-FREE BIOREACTOR TREATMENT OF ACID ROCK DRAINAGE LEVIATHAN MINE, CALIFORNIA INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    As part of the Superfund Innovative Technology Evaluation (SITE) program, an evaluation of the compost-free bioreactor treatment of acid rock drainage (ARD) from the Aspen Seep was conducted at the Leviathan Mine Superfund site located in a remote, high altitude area of Alpine Co...

  11. New sensor technologies in quality evaluation of Chinese materia medica: 2010-2015.

    Science.gov (United States)

    Miao, Xiaosu; Cui, Qingyu; Wu, Honghui; Qiao, Yanjiang; Zheng, Yanfei; Wu, Zhisheng

    2017-03-01

    New sensor technologies play an important role in quality evaluation of Chinese materia medica (CMM) and include near-infrared spectroscopy, chemical imaging, electronic nose and electronic tongue. This review on quality evaluation of CMM and the application of the new sensors in this assessment is based on studies from 2010 to 2015, with prospects and opportunities for future research.

  12. Application of House of Quality in evaluation of low rank coal pyrolysis polygeneration technologies

    International Nuclear Information System (INIS)

    Yang, Qingchun; Yang, Siyu; Qian, Yu; Kraslawski, Andrzej

    2015-01-01

    Highlights: • House of Quality method was used for assessment of coal pyrolysis polygeneration technologies. • Low rank coal pyrolysis polygeneration processes based on solid heat carrier, moving bed and fluidized bed were evaluated. • Technical and environmental criteria for the assessment of technologies were used. • Low rank coal pyrolysis polygeneration process based on a fluidized bed is the best option. - Abstract: Increasing interest in low rank coal pyrolysis (LRCP) polygeneration has resulted in the development of a number of different technologies and approaches. Evaluation of LRCP processes should include not only conventional efficiency, economic and environmental assessments, but also take into consideration sustainability aspects. As a result of the many complex variables involved, selection of the most suitable LRCP technology becomes a challenging task. This paper applies a House of Quality method in comprehensive evaluation of LRCP. A multi-level evaluation model addressing 19 customer needs and analyzing 10 technical characteristics is developed. Using the evaluation model, the paper evaluates three LRCP technologies, which are based on solid heat carrier, moving bed and fluidized bed concepts, respectively. The results show that the three most important customer needs are level of technical maturity, wastewater emissions, and internal rate of return. The three most important technical characteristics are production costs, investment costs and waste emissions. On the basis of the conducted analysis, it is concluded that the LRCP process utilizing a fluidized bed approach is the optimal alternative studied

  13. Educational technology "Anatomy and Vital Signs": Evaluation study of content, appearance and usability.

    Science.gov (United States)

    de Góes, Fernanda dos Santos Nogueira; Fonseca, Luciana Mara Monti; de Camargo, Rosangela Andrade Aukar; de Oliveira, Gustavo Faria; Felipe, Helena Reche

    2015-11-01

    The use of new technology has recently grown considerably as an increasing number of college students using Internet. In nursing education, the personal computer and the Internet facilitate teaching theoretical and practical knowledge. Evaluate an educational technology known as "Anatomy and Vital Signs" with respect to content, appearance and usability. This was a first stage evaluation-by specialists to verify content and functioning, prior to a second validation as to learning by students. A methodological study in which instructional technologists (11 participants) and nursing specialists (17 participants) used the technology in an unguided manner and completed three questionnaires. The evaluation was measured by the difference between disagreement and agreement for each statement in the questionnaires. Most of the items were positively evaluated at a level higher than 70% by most of the evaluators except for the following usability criteria: grouping by shape, minimum actions and user control, which did not attain the 70% agreement level among instructional technologists. The evaluation was useful to improve the technology and guarantee suitable product for nursing education. It may be a reliable educational tool for nursing education that applies technological resources. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  14. Embedding technology into inter-professional best practices in home safety evaluation.

    Science.gov (United States)

    Burns, Suzanne Perea; Pickens, Noralyn Davel

    2017-08-01

    To explore inter-professional home evaluators' perspectives and needs for building useful and acceptable decision-support tools for the field of home modifications. Twenty semi-structured interviews were conducted with a range of home modification professionals from different regions of the United States. The interview transcripts were analyzed with a qualitative, descriptive, perspective approach. Technology supports current best practice and has potential to inform decision making through features that could enhance home evaluation processes, quality, efficiency and inter-professional communication. Technological advances with app design have created numerous opportunities for the field of home modifications. Integrating technology and inter-professional best practices will improve home safety evaluation and intervention development to meet client-centred and societal needs. Implications for rehabilitation Understanding home evaluators technology needs for home safety evaluations contributes to the development of app-based assessments. Integrating inter-professional perspectives of best practice and technological needs in an app for home assessments improves processes. Novice and expert home evaluators would benefit from decision support systems embedded in app-based assessments. Adoption of app-based assessment would improve efficiency while remaining client-centred.

  15. Acceptance of genetically modified foods: the relation between technology and evaluation.

    Science.gov (United States)

    Tenbült, Petra; De Vries, Nanne K; van Breukelen, Gerard; Dreezens, Ellen; Martijn, Carolien

    2008-07-01

    This study investigates why consumers accept different genetically modified food products to different extents. The study shows that whether food products are genetically modified or not and whether they are processed or not are the two important features that affect the acceptance of food products and their evaluation (in terms of perceived healthiness, naturalness, necessity and tastiness). The extent to which these evaluation attributes and acceptance of a product are affected by genetic modification or processing depends on whether the product is negatively affected by the other technology: Any technological change to a 'natural' product (when nonprocessed products are genetically modified or when non-genetically modified products are processed) affect evaluation and acceptance stronger than a change to an technologically adapted product (when processed products are also genetically modified or vice versa). Furthermore, evaluation attributes appear to mediate the effects of genetic modification and processing on acceptance.

  16. Bookline: a technological tool at service of scientific papers evaluation in academic events

    Directory of Open Access Journals (Sweden)

    Cênio Back Weyh

    2016-12-01

    Full Text Available The use of technologies has been more common each day in teaching. The softwares that facilitate the teacher’s work as a technological source can also be used for other aspects of education. The scientific events are fundamental for the particular student’s learnings in higher education. Considering the complexity of coordinating an event due to the number of people involved and the means of sending works for analysis and their evaluation during the event, we looked forward to developing technological tools. In this sense, we developed a software to manage scientific events providing an interface for the organization of the works’ evaluation and of the criteria for evaluation, as well as the management of evaluators and their thematic areas of performance. The software named Bookline was designed for mobile environments, making it possible for the evaluators to wander around freely during the evaluations, getting additional information about each criterion of evaluation, in order to enable the widest spectrum in the constitution of the work’s mark. At the end of the evaluations, the evaluator sends his considerations to the central server, that processes and compiles its data and from the rest of the evaluators identifying if the work was accepted.

  17. Sustainability Of Electricity Supply Technologies under German Conditions: A Comparative Evaluation

    International Nuclear Information System (INIS)

    Hirschberg, S; Dones, R.; Heck, T.; Burgherr, P.; Schenler, W.; Bauer, C.

    2004-12-01

    On behalf of the International Committee on Nuclear Technology (ILK) the Paul Scherrer Institut carried out a comparative study addressing the sustainability of electricity supply technologies operating under German-specific conditions. The general objective of this analysis was to provide a support for the formulation of ILK position on the sustainability of various electricity supply technologies, with special emphasis on nuclear energy. The evaluation covers selected current fossil, nuclear and renewable technologies, which are representative for the average conditions in Germany. Two methods of indicator aggregation were employed, i.e. estimation of total (internal and extemal) costs and Multi-criteria Decision Analysis (MCDA). Use of MCDA is motivated by acknowledgement of the role of value judgements in decision-making. Both total costs and MCDA-based technology-specific total scores are useful comparative indicators of sustainability. Sustainability perspective implies a balanced (equal) importance assignment to economic, ecological and social aspects. In summary, this study provides a framework for systematic evaluation of sustainability of energy systems. Refinements of the methodology and specific indicators are feasible. Options for future applications include direct involvement of stakeholders, and evaluations of future technologies and of supply scenarios combining the various candidate technologies. Tools supporting such analyses have been developed by PSI and can be adjusted to the needs of country-specific applications. (author)

  18. Evaluation of alternative nonflame technologies for destruction of hazardous organic waste

    Energy Technology Data Exchange (ETDEWEB)

    Schwinkendorf, W.E. [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States); Musgrave, B.C. [BC Musgrave, Inc. (United States); Drake, R.N. [Drake Engineering, Inc. (United States)

    1997-04-01

    The US Department of Energy`s Mixed Waste Focus Area (MWFA) commissioned an evaluation of mixed waste treatment technologies that are alternatives to incineration for destruction of hazardous organic wastes. The purpose of this effort is to evaluate technologies that are alternatives to open-flame, free-oxygen combustion (as exemplified by incinerators), and recommend to the Waste Type Managers and the MWFA which technologies should be considered for further development. Alternative technologies were defined as those that have the potential to: destroy organic material without use of open-flame reactions with free gas-phase oxygen as the reaction mechanism; reduce the offgas volume and associated contaminants (metals, radionuclides, and particulates) emitted under normal operating conditions; eliminate or reduce the production of dioxins and furans; and reduce the potential for excursions in the process that can lead to accidental release of harmful levels of chemical or radioactive materials. Twenty-three technologies were identified that have the potential for meeting these requirements. These technologies were rated against the categories of performance, readiness for deployment, and environment safety, and health. The top ten technologies that resulted from this evaluation are Steam Reforming, Electron Beam, UV Photo-Oxidation, Ultrasonics, Eco Logic reduction process, Supercritical Water oxidation, Cerium Mediated Electrochemical Oxidation, DETOX{sup SM}, Direct Chemical Oxidation (peroxydisulfate), and Neutralization/Hydrolysis.

  19. Evaluation of alternative nonflame technologies for destruction of hazardous organic waste

    International Nuclear Information System (INIS)

    Schwinkendorf, W.E.; Musgrave, B.C.; Drake, R.N.

    1997-04-01

    The US Department of Energy's Mixed Waste Focus Area (MWFA) commissioned an evaluation of mixed waste treatment technologies that are alternatives to incineration for destruction of hazardous organic wastes. The purpose of this effort is to evaluate technologies that are alternatives to open-flame, free-oxygen combustion (as exemplified by incinerators), and recommend to the Waste Type Managers and the MWFA which technologies should be considered for further development. Alternative technologies were defined as those that have the potential to: destroy organic material without use of open-flame reactions with free gas-phase oxygen as the reaction mechanism; reduce the offgas volume and associated contaminants (metals, radionuclides, and particulates) emitted under normal operating conditions; eliminate or reduce the production of dioxins and furans; and reduce the potential for excursions in the process that can lead to accidental release of harmful levels of chemical or radioactive materials. Twenty-three technologies were identified that have the potential for meeting these requirements. These technologies were rated against the categories of performance, readiness for deployment, and environment safety, and health. The top ten technologies that resulted from this evaluation are Steam Reforming, Electron Beam, UV Photo-Oxidation, Ultrasonics, Eco Logic reduction process, Supercritical Water oxidation, Cerium Mediated Electrochemical Oxidation, DETOX SM , Direct Chemical Oxidation (peroxydisulfate), and Neutralization/Hydrolysis

  20. Evaluating interactive technology for an evolving case study on learning and satisfaction of graduate nursing students.

    Science.gov (United States)

    Vogt, Marjorie A; Schaffner, Barbara H

    2016-07-01

    Nursing education is challenged to prepare students for complex healthcare needs through the integration of teamwork and informatics. Technology has become an important teaching tool in the blended classroom to enhance group based learning experiences. Faculty evaluation of classroom technologies is imperative prior to adoption. Few studies have directly compared various technologies and their impact on student satisfaction and learning. The purpose of this study was to evaluate technology enhanced teaching methods on the learning and satisfaction of graduate students in an advanced pharmacology class using an unfolding case study. After IRB approval, students were randomly assigned to one of three groups: blogging group, wiki group or webinar group. Students completed the evolving case study using the assigned interactive technology. Student names were removed from the case studies. Faculty evaluated the case study using a rubric, while blinded to the assigned technology method used. No significant difference was found on case study grades, the range of grades on the assignment demonstrated little differences between the methods used. Students indicated an overall positive impact related to networking and collaboration on a satisfaction survey. Impact of technology methods needs to be explored in other areas of graduate nursing education. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Software Quality Evaluation Models Applicable in Health Information and Communications Technologies. A Review of the Literature.

    Science.gov (United States)

    Villamor Ordozgoiti, Alberto; Delgado Hito, Pilar; Guix Comellas, Eva María; Fernandez Sanchez, Carlos Manuel; Garcia Hernandez, Milagros; Lluch Canut, Teresa

    2016-01-01

    Information and Communications Technologies in healthcare has increased the need to consider quality criteria through standardised processes. The aim of this study was to analyse the software quality evaluation models applicable to healthcare from the perspective of ICT-purchasers. Through a systematic literature review with the keywords software, product, quality, evaluation and health, we selected and analysed 20 original research papers published from 2005-2016 in health science and technology databases. The results showed four main topics: non-ISO models, software quality evaluation models based on ISO/IEC standards, studies analysing software quality evaluation models, and studies analysing ISO standards for software quality evaluation. The models provide cost-efficiency criteria for specific software, and improve use outcomes. The ISO/IEC25000 standard is shown as the most suitable for evaluating the quality of ICTs for healthcare use from the perspective of institutional acquisition.

  2. Evaluating core technology capacity based on an improved catastrophe progression method: the case of automotive industry

    Science.gov (United States)

    Zhao, Shijia; Liu, Zongwei; Wang, Yue; Zhao, Fuquan

    2017-01-01

    Subjectivity usually causes large fluctuations in evaluation results. Many scholars attempt to establish new mathematical methods to make evaluation results consistent with actual objective situations. An improved catastrophe progression method (ICPM) is constructed to overcome the defects of the original method. The improved method combines the merits of the principal component analysis' information coherence and the catastrophe progression method's none index weight and has the advantage of highly objective comprehensive evaluation. Through the systematic analysis of the influencing factors of the automotive industry's core technology capacity, the comprehensive evaluation model is established according to the different roles that different indices play in evaluating the overall goal with a hierarchical structure. Moreover, ICPM is developed for evaluating the automotive industry's core technology capacity for the typical seven countries in the world, which demonstrates the effectiveness of the method.

  3. Global Assessment of Hydrogen Technologies - Task 1 Report Technology Evaluation of Hydrogen Light Duty Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Fouad, Fouad H.; Peters, Robert W.; Sisiopiku, Virginia P.; Sullivan Andrew J.; Rousseau, Aymeric

    2007-12-01

    This task analyzes the candidate hydrogen-fueled vehicles for near-term use in the Southeastern U.S. The purpose of this work is to assess their potential in terms of efficiency and performance. This report compares conventional, hybrid electric vehicles (HEV) with gasoline and hydrogen-fueled internal combustion engines (ICEs) as well as fuel cell and fuel cell hybrids from a technology as well as fuel economy point of view. All the vehicles have been simulated using the Powertrain System Analysis Toolkit (PSAT). First, some background information is provided on recent American automotive market trends and consequences. Moreover, available options are presented for introducing cleaner and more economical vehicles in the market in the future. In this study, analysis of various candidate hydrogen-fueled vehicles is performed using PSAT and, thus, a brief description of PSAT features and capabilities are provided. Detailed information on the simulation analysis performed is also offered, including methodology assumptions, fuel economic results, and conclusions from the findings.

  4. Economic evaluation of integrated new technologies for health and social care: Suggestions for policy makers, users and evaluators.

    Science.gov (United States)

    Wildman, John; McMeekin, Peter; Grieve, Eleanor; Briggs, Andrew

    2016-11-01

    With an ageing population there is a move towards the use of assisted living technologies (ALTs) to provide social care and health care services, and to improve service processes. These technologies are at the forefront of the integration of health and social care. However, economic evaluations of ALTs, and indeed economic evaluations of any interventions providing both health benefits and benefits beyond health are complex. This paper considers the challenges faced by evaluators and presents a method of economic evaluation for use with interventions where traditional methods may not be suitable for informing funders and decision makers. We propose a method, combining economic evaluation techniques, that can accommodate health outcomes and outcomes beyond health through the use of a common numeraire. Such economic evaluations can benefit both the public and private sector, firstly by ensuring the efficient allocation of resources. And secondly, by providing information for individuals who, in the market for ALTs, face consumption decisions that are infrequent and for which there may be no other sources of information. We consider these issues in the welfarist, extra-welfarist and capabilities frameworks, which we link to attributes in an individual production model. This approach allows for the valuation of the health component of any such intervention and the valuation of key social care attributes and processes. Finally, we present a set of considerations for evaluators highlighting the key issues that need to be considered in this type of economic evaluation. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

  5. Innovative use of the integrative review to evaluate evidence of technology transformation in healthcare.

    Science.gov (United States)

    Phillips, Andrew B; Merrill, Jacqueline A

    2015-12-01

    Healthcare is in a period significant transformational activity through the accelerated adoption of healthcare technologies, new reimbursement systems that emphasize shared savings and care coordination, and the common place use of mobile technologies by patients, providers, and others. The complexity of healthcare creates barriers to transformational activity and has the potential to inhibit the desired paths toward change envisioned by policymakers. Methods for understanding how change is occurring within this complex environment are important to the evaluation of delivery system reform and the role of technology in healthcare transformation. This study examines the use on an integrative review methodology to evaluate the healthcare literature for evidence of technology transformation in healthcare. The methodology integrates the evaluation of a broad set of literature with an established evaluative framework to develop a more complete understanding of a particular topic. We applied this methodology and the framework of punctuated equilibrium (PEq) to the analysis of the healthcare literature from 2004 to 2012 for evidence of technology transformation, a time during which technology was at the forefront of healthcare policy. The analysis demonstrated that the established PEq framework applied to the literature showed considerable potential for evaluating the progress of policies that encourage healthcare transformation. Significant inhibitors to change were identified through the integrative review and categorized into ten themes that describe the resistant structure of healthcare delivery: variations in the environment; market complexity; regulations; flawed risks and rewards; change theories; barriers; ethical considerations; competition and sustainability; environmental elements, and internal elements. We hypothesize that the resistant nature of the healthcare system described by this study creates barriers to the direct consumer involvement and engagement

  6. Health Information Technology Evaluation Framework (HITREF) Comprehensiveness as Assessed in Electronic Point-of-Care Documentation Systems Evaluations.

    Science.gov (United States)

    Sockolow, Paulina S; Bowles, Kathryn H; Rogers, Michelle

    2015-01-01

    We assessed the Health Information Technology (HIT) Reference-based Evaluation Framework (HITREF) comprehensiveness in two HIT evaluations in settings different from that in which the HITREF was developed. Clinician satisfaction themes that emerged from clinician interviews in the home care and the hospital studies were compared to the framework components. Across both studies, respondents commented on 12 of the 20 HITREF components within 5 of the 6 HITREF concepts. No new components emerged that were missing from the HITREF providing evidence that the HITREF is a comprehensive framework. HITREF use in a range of HIT evaluations by researchers new to the HITREF demonstrates that it can be used as intended. Therefore, we continue to recommend the HITREF as a comprehensive, research-based HIT evaluation framework to increase the capacity of informatics evaluators' use of best practice and evidence-based practice to support the credibility of their findings for fulfilling the purpose of program evaluation.

  7. Evaluation and Mapping of The Use of Technology in The Pulp And Paper Agro Industry

    OpenAIRE

    Yulia Nurendah

    2015-01-01

    The execution and the implementation of the revitalization program and the growth of pulp and paper agro industry require evaluation activities. For that, we need a study that will provide evaluation and mapping of the implementation of policies and programs so that the analysis, assessment and weighting can be more transparent and measurable. The main objective of this activity is, there are an evaluation and mapping policy as well as output-based programs to the use of technology in the pul...

  8. The value added of conducting regional versus local stakeholder involvement in evaluating technology acceptance

    International Nuclear Information System (INIS)

    McCabe, G.H.

    1995-06-01

    Battelle has conducted a three-year effort, funded by the U. S Department of Energy's (DOE) Office of Technology Development, to involve stakeholders in evaluating innovative technologies to clean up volatile organic compound (VOC) contamination at arid sites. Stakeholders have been encouraged to participate in the demonstration of these innovative technologies in order to improve decisions made by DOE and its contractors about technology development, demonstration, and deployment. The basic approach is to identify people and organizations with a stake in the remediation process, and hence in the demonstration of innovative technologies. Stakeholders have included public interest group and environmental group representatives, regulators, technology users, Native Americans, Hispanic community members, and local elected officials. These people are invited to be involved and they are presented with substantive information about the technologies. Their input in terms of identifying issues and concerns, defining the kinds of information needed from the demonstrations, and assessing the acceptability of the technologies for deployment, will help ensure that only broadly promising technologies are carried forward. This approach is designed to increase the likelihood of successful deployment of the new technologies needed to accomplish environmental restoration throughout the DOE complex and at private facilities. The hypothesis in conducting this regional stakeholder involvement program is that there will be different data requirements for different sites due to geographical, institutional, programmatic, and cultural differences at the sites. Identifying the broadest set of data requirements, collecting this information during the technology demonstration, and providing the results of the demonstration to stakeholders will enhance the acceptance of the technology at these sites and, thereby, enhance the technology's deployability

  9. Strategies for successful evaluation and policy-making toward health care technology on the move : The case of medical lasers

    NARCIS (Netherlands)

    Banta, H.D.; Vondeling, H.

    1994-01-01

    Evaluating new health care technology that is rapidly diffusing is one of the greatest challenges to researchers and policy-makers. If no evaluation is done until the technology is mature, evaluation will not influence processes of diffusion. If evaluation is done early, it may be irrelevant when it

  10. Developments of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

    2003-03-15

    The objective of this research is to develop an efficient evaluation technology and to investigate applicability of newly-developed technology, such as internet-based cyber platform, to operating power plants. Development of efficient evaluation systems for Nuclear Power Plant components, based on structural integrity assessment techniques, are increasingly demanded for safe operation with the increasing operating period of Nuclear Power Plants. The following five topics are covered in this project: development of assessment method for wall-thinned nuclear piping based on pipe test; development of structural integrity program for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for mam components of NPP; development of internet-based cyber platform and integrity program for primary components of NPP; effect of aging on strength of dissimilar welds.

  11. Socializing the public: invoking Hannah Arendt's critique of modernity to evaluate reproductive technologies.

    Science.gov (United States)

    Sperling, Daniel

    2012-02-01

    The article examines the writings of one of the most influential political philosophers, Hannah Arendt, and specifically focuses on her views regarding the distinction between the private and the public and the transformation of the public to the social by modernity. Arendt's theory of human activity and critique of modernity are explored to critically evaluate the social contributions and implications of reproductive technologies especially where the use of such technologies is most dominant within Western societies. Focusing on empirical studies on new reproductive technologies in Israel, it is argued, powerfully demonstrates Arendt's theory, and broadens the perspectives through which society should evaluate these new technologies towards a more reflective understanding of its current laws and policies and their affect on women more generally.

  12. SNP-finding in pig mitochondrial ESTs

    DEFF Research Database (Denmark)

    Scheibye-Alsing, Karsten; Cirera Salicio, Susanna; Gilchrist, M.J.

    2008-01-01

    The Sino-Danish pig genome project produced 685 851 ESTs (Gorodkin et al. 2007), of which 41 499 originated from the mitochondrial genome. In this study, the mitochondrial ESTs were assembled, and 374 putative SNPs were found. Chromatograms for the ESTs containing SNPs were manually inspected, an......, and 112 total (52 non-synonymous) SNPs were found to be of high confidence (five of them are close to disease-causing SNPs in humans). Nine of the high-confidence SNPs were tested experimentally, and eight were confirmed. The SNPs can be accessed online at http://pigest.ku.dk/more.mito...

  13. Ortodoncia estética invisible

    OpenAIRE

    Chávez Sevillano, Manuel Gustavo; Soldevilla Galarza, Luciano

    2014-01-01

    El adulto suele ofrecer resistencia a los convencionales tratamientos ortodóncicos, debido a la necesidad de llevar brackets visibles, tanto metálicos como estéticos de porcelana. El concepto de Ortodoncia Estética Invisible u Ortodoncia Lingual cubre las expectativas de este tipo de pacientes. La técnica multibrackets con aparatología lingual tiene aproximadamente 25 años de desarrollo y con la experiencia de los casos tratados, se ha llegado a la concepción de una técnica completamente prot...

  14. ECONOMIC EVALUATION OF CO2 SEQUESTRATION TECHNOLOGIES TASK 4, BIOMASS GASIFICATION-BASED PROCESSING

    Energy Technology Data Exchange (ETDEWEB)

    Martha L. Rollins; Les Reardon; David Nichols; Patrick Lee; Millicent Moore; Mike Crim; Robert Luttrell; Evan Hughes

    2002-06-01

    Biomass derived energy currently accounts for about 3 quads of total primary energy use in the United States. Of this amount, about 0.8 quads are used for power generation. Several biomass energy production technologies exist today which contribute to this energy mix. Biomass combustion technologies have been the dominant source of biomass energy production, both historically and during the past two decades of expansion of modern biomass energy in the U. S. and Europe. As a research and development activity, biomass gasification has usually been the major emphasis as a method of more efficiently utilizing the energy potential of biomass, particularly wood. Numerous biomass gasification technologies exist today in various stages of development. Some are simple systems, while others employ a high degree of integration for maximum energy utilization. The purpose of this study is to conduct a technical and economic comparison of up to three biomass gasification technologies, including the carbon dioxide emissions reduction potential of each. To accomplish this, a literature search was first conducted to determine which technologies were most promising based on a specific set of criteria. The technical and economic performances of the selected processes were evaluated using computer models and available literature. Using these results, the carbon sequestration potential of the three technologies was then evaluated. The results of these evaluations are given in this final report.

  15. Development and Evaluation of Science and Technology Education Program Using Interferometric SAR

    Science.gov (United States)

    Ito, Y.; Ikemitsu, H.; Nango, K.

    2016-06-01

    This paper proposes a science and technology education program to teach junior high school students to measure terrain changes by using interferometric synthetic aperture radar (SAR). The objectives of the proposed program are to evaluate and use information technology by performing SAR data processing in order to measure ground deformation, and to incorporate an understanding of Earth sciences by analyzing interferometric SAR processing results. To draft the teaching guidance plan for the developed education program, this study considers both science and technology education. The education program was used in a Japanese junior high school. An educational SAR processor developed by the authors and the customized Delft object-oriented radar interferometric software package were employed. Earthquakes as diastrophism events were chosen as practical teaching materials. The selected events indicate clear ground deformation in differential interferograms with high coherence levels. The learners were able to investigate the ground deformations and disasters caused by the events. They interactively used computers and became skilled at recognizing the knowledge and techniques of information technology, and then they evaluated the technology. Based on the results of pre- and post-questionnaire surveys and self-evaluation by the learners, it was clarified that the proposed program was applicable for junior high school education, and the learners recognized the usefulness of Earth observation technology by using interferometric SAR. The usefulness of the teaching materials in the learning activities was also shown through the practical teaching experience.

  16. Evaluation technology of human behavior cognition; Ningen kodo ninchi hyoka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For human engineering and improvement of the living environment, the evaluation technology of human behavior cognition was studied. For the future reformation and creation of economic structure, the following are required: establishment of safe and affluent communities, further improvement of the safety and harmonious balance of people, lives and society, and R & D close to people and social needs. Introduction of Product Liability law and a fail-safe concept are examples of such efforts. However, since many accidents are found in the human society, the relation between human errors and human characteristics should be studied in detail. The cognitive science of human behavior is an objective evaluation technology from the viewpoint of human being, object, environment and society. Based on these social and technological background, the feasibility of the evaluation technology is studied, and the future trend and skeleton of this project are clarified. The domestic and foreign trends of technologies concerned are thus surveyed, and the important points, features, skeleton and ripple effect of the technology are summarized. 500 refs., 70 figs., 5 tabs.

  17. Performance Evaluation of Speech Recognition Systems as a Next-Generation Pilot-Vehicle Interface Technology

    Science.gov (United States)

    Arthur, Jarvis J., III; Shelton, Kevin J.; Prinzel, Lawrence J., III; Bailey, Randall E.

    2016-01-01

    During the flight trials known as Gulfstream-V Synthetic Vision Systems Integrated Technology Evaluation (GV-SITE), a Speech Recognition System (SRS) was used by the evaluation pilots. The SRS system was intended to be an intuitive interface for display control (rather than knobs, buttons, etc.). This paper describes the performance of the current "state of the art" Speech Recognition System (SRS). The commercially available technology was evaluated as an application for possible inclusion in commercial aircraft flight decks as a crew-to-vehicle interface. Specifically, the technology is to be used as an interface from aircrew to the onboard displays, controls, and flight management tasks. A flight test of a SRS as well as a laboratory test was conducted.

  18. [Ecosystem services evaluation based on geographic information system and remote sensing technology: a review].

    Science.gov (United States)

    Li, Wen-Jie; Zhang, Shi-Huang; Wang, Hui-Min

    2011-12-01

    Ecosystem services evaluation is a hot topic in current ecosystem management, and has a close link with human beings welfare. This paper summarized the research progress on the evaluation of ecosystem services based on geographic information system (GIS) and remote sensing (RS) technology, which could be reduced to the following three characters, i. e., ecological economics theory is widely applied as a key method in quantifying ecosystem services, GIS and RS technology play a key role in multi-source data acquisition, spatiotemporal analysis, and integrated platform, and ecosystem mechanism model becomes a powerful tool for understanding the relationships between natural phenomena and human activities. Aiming at the present research status and its inadequacies, this paper put forward an "Assembly Line" framework, which was a distributed one with scalable characteristics, and discussed the future development trend of the integration research on ecosystem services evaluation based on GIS and RS technologies.

  19. Managed access technology to combat contraband cell phones in prison: Findings from a process evaluation.

    Science.gov (United States)

    Grommon, Eric

    2018-02-01

    Cell phones in correctional facilities have emerged as one of the most pervasive forms of modern contraband. This issue has been identified as a top priority for many correctional administrators in the United States. Managed access, a technology that utilizes cellular signals to capture transmissions from contraband phones, has received notable attention as a promising tool to combat this problem. However, this technology has received little evaluative attention. The present study offers a foundational process evaluation and draws upon output measures and stakeholder interviews to identify salient operational challenges and subsequent lessons learned about implementing and maintaining a managed access system. Findings suggest that while managed access captures large volumes of contraband cellular transmissions, the technology requires significant implementation planning, personnel support, and complex partnerships with commercial cellular carriers. Lessons learned provide guidance for practitioners to navigate these challenges and for scholars to improve future evaluations of managed access. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. [Evaluation of treatment technology of odor pollution source in petrochemical industry].

    Science.gov (United States)

    Mu, Gui-Qin; Sui, Li-Hua; Guo, Ya-Feng; Ma, Chuan-Jun; Yang, Wen-Yu; Gao, Yang

    2013-12-01

    Using an environmental technology assessment system, we put forward the evaluation index system for treatment technology of the typical odor pollution sources in the petroleum refining process, which has been applied in the assessment of the industrial technology. And then the best available techniques are selected for emissions of gas refinery sewage treatment plant, headspace gas of acidic water jars, headspace gas of cold coke jugs/intermediate oil tank/dirty oil tank, exhaust of oxidative sweetening, and vapors of loading and unloading oil.

  1. Evaluation of technologies for remediation of disposed radioactive and hazardous wastes in a facility at the Idaho National Engineering Laboratory

    International Nuclear Information System (INIS)

    Reno, H.W.; Martin, D.D.; Rasmussen, T.L.

    1989-01-01

    For the past twenty years the US Department of Energy has been investigating and evaluating technologies for the long term management of disposed transuranic contaminated wastes at the Radioactive Waste Management Complex of the Idaho National Engineering Laboratory. More than fifty technologies have been investigated and evaluated and three technologies have been selected for feasibility study demonstration at the complex. This paper discusses the evaluation of those technologies and describes the three technologies selected for demonstration. The paper further suggests that future actions under the Comprehensive Environmental Response, Compensation, and Liability Act should build from previous evaluations completed heretofore. 18 refs., 3 figs., 1 tab

  2. Evaluation of the performance of different anaerobic digestion technologies for solid waste treatment

    Energy Technology Data Exchange (ETDEWEB)

    Chavez-Vazquez, M.; Bagley, D.M. [Univ. of Toronto, Dept. of Civil Engineering, Toronto, Ontario (Canada)

    2002-06-15

    The anaerobic digestion of solid wastes is now a widely-used technology in Europe with more than 50 full-scale plants operating. However, anaerobic solid waste digestion is still used to only a limited extent in North America with only three facilities in Canada. Because of the expected importance of anaerobic digestion in the future for energy recovery, reliable tools are required to evaluate the different available technologies, as well as the feed stocks that are suitable for treatment. Therefore, this paper presents a framework that has been developed for evaluating anaerobic solid waste digestion. To develop the framework, a review of the performance of digestion processes was first conducted. Because the data presented were for very different operational parameters (retention time, temperature, configuration set up, mixing, etc.) as well as substrates used for digestion, a standard method of comparison was developed. Gas production per Mg input, organic loading rate and percent volatile solids removal were identified as useful standard parameters for evaluating the performance of different technologies. This framework was constructed as a spread sheet and can be used for different set ups (configuration, organic loading rate, etc.) and with different substrates. It can predict, based on the input and using mass balances, the mass of products of the digester including biogas, treated solids and water. This framework provides a useful tool for evaluating the technical capabilities of different technologies, predicting the quantity of the products, and ultimately, making decisions as to which technologies best meet local needs. (author)

  3. Evaluation of the performance of different anaerobic digestion technologies for solid waste treatment

    International Nuclear Information System (INIS)

    Chavez-Vazquez, M.; Bagley, D.M.

    2002-01-01

    The anaerobic digestion of solid wastes is now a widely-used technology in Europe with more than 50 full-scale plants operating. However, anaerobic solid waste digestion is still used to only a limited extent in North America with only three facilities in Canada. Because of the expected importance of anaerobic digestion in the future for energy recovery, reliable tools are required to evaluate the different available technologies, as well as the feed stocks that are suitable for treatment. Therefore, this paper presents a framework that has been developed for evaluating anaerobic solid waste digestion. To develop the framework, a review of the performance of digestion processes was first conducted. Because the data presented were for very different operational parameters (retention time, temperature, configuration set up, mixing, etc.) as well as substrates used for digestion, a standard method of comparison was developed. Gas production per Mg input, organic loading rate and percent volatile solids removal were identified as useful standard parameters for evaluating the performance of different technologies. This framework was constructed as a spread sheet and can be used for different set ups (configuration, organic loading rate, etc.) and with different substrates. It can predict, based on the input and using mass balances, the mass of products of the digester including biogas, treated solids and water. This framework provides a useful tool for evaluating the technical capabilities of different technologies, predicting the quantity of the products, and ultimately, making decisions as to which technologies best meet local needs. (author)

  4. Biomechanical Analysis and Evaluation Technology Using Human Multi-Body Dynamic Model

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yoon Hyuk; Shin, June Ho; Khurelbaatar, Tsolmonbaatar [Kyung Hee University, Yongin (Korea, Republic of)

    2011-10-15

    This paper presents the biomechanical analysis and evaluation technology of musculoskeletal system by multi-body human dynamic model and 3-D motion capture data. First, medical image based geometric model and material properties of tissue were used to develop the human dynamic model and 3-D motion capture data based motion analysis techniques were develop to quantify the in-vivo joint kinematics, joint moment, joint force, and muscle force. Walking and push-up motion was investigated using the developed model. The present model and technologies would be useful to apply the biomechanical analysis and evaluation of human activities.

  5. Sensitivity analysis of technological, economic and sustainability evaluation of power plants using the analytic hierarchy process

    International Nuclear Information System (INIS)

    Chatzimouratidis, Athanasios I.; Pilavachi, Petros A.

    2009-01-01

    Technological, economic and sustainability evaluation of power plants by use of the analytic hierarchy process and nine end node criteria for a reference scenario based on subjective criteria weighting has been presented in a previous paper by authors. However, criteria weight variations may substantially modify overall evaluations and rankings of power plants. The current paper presents a sensitivity analysis with four alternative scenarios (sets of criteria weights) compared with the reference scenario. The results show that priority to 'technology and sustainability' favors renewable energy power plants, while priority to 'economic' criteria favors mainly nuclear power plants and less the four types of fossil fuel power plant

  6. Evaluating the Intellectual Capital of Technology Transfer and Learning Public Services

    Directory of Open Access Journals (Sweden)

    Michele Grimaldi

    2013-03-01

    Full Text Available Since the rise of the knowledge‐based economy, many worldwide companies have begun to deal with different frameworks to manage and evaluate the performance of intellectual capital, especially in the area of knowledge management services. This paper presents a novel conceptual model aiming to support management in evaluating and prioritizing their intellectual capital competitive core competences. Based on the analytic hierarchy process, the model analyses interdependences among intellectual capital elements and determines the impacts of core competences on organizational performance. To validate the model, it is empirically applied in the Technology Transfer Unit of the Italian national agency for new technologies, energy and economic development.

  7. Wheat EST resources for functional genomics of abiotic stress

    Directory of Open Access Journals (Sweden)

    Links Matthew G

    2006-06-01

    Full Text Available Abstract Background Wheat is an excellent species to study freezing tolerance and other abiotic stresses. However, the sequence of the wheat genome has not been completely characterized due to its complexity and large size. To circumvent this obstacle and identify genes involved in cold acclimation and associated stresses, a large scale EST sequencing approach was undertaken by the Functional Genomics of Abiotic Stress (FGAS project. Results We generated 73,521 quality-filtered ESTs from eleven cDNA libraries constructed from wheat plants exposed to various abiotic stresses and at different developmental stages. In addition, 196,041 ESTs for which tracefiles were available from the National Science Foundation wheat EST sequencing program and DuPont were also quality-filtered and used in the analysis. Clustering of the combined ESTs with d2_cluster and TGICL yielded a few large clusters containing several thousand ESTs that were refractory to routine clustering techniques. To resolve this problem, the sequence proximity and "bridges" were identified by an e-value distance graph to manually break clusters into smaller groups. Assembly of the resolved ESTs generated a 75,488 unique sequence set (31,580 contigs and 43,908 singletons/singlets. Digital expression analyses indicated that the FGAS dataset is enriched in stress-regulated genes compared to the other public datasets. Over 43% of the unique sequence set was annotated and classified into functional categories according to Gene Ontology. Conclusion We have annotated 29,556 different sequences, an almost 5-fold increase in annotated sequences compared to the available wheat public databases. Digital expression analysis combined with gene annotation helped in the identification of several pathways associated with abiotic stress. The genomic resources and knowledge developed by this project will contribute to a better understanding of the different mechanisms that govern stress tolerance in

  8. Application research for 4D technology in flood forecasting and evaluation

    Science.gov (United States)

    Li, Ziwei; Liu, Yutong; Cao, Hongjie

    1998-08-01

    In order to monitor the region which disaster flood happened frequently in China, satisfy the great need of province governments for high accuracy monitoring and evaluated data for disaster and improve the efficiency for repelling disaster, under the Ninth Five-year National Key Technologies Programme, the method was researched for flood forecasting and evaluation using satellite and aerial remoted sensed image and land monitor data. The effective and practicable flood forecasting and evaluation system was established and DongTing Lake was selected as the test site. Modern Digital photogrammetry, remote sensing and GIS technology was used in this system, the disastrous flood could be forecasted and loss can be evaluated base on '4D' (DEM -- Digital Elevation Model, DOQ -- Digital OrthophotoQuads, DRG -- Digital Raster Graph, DTI -- Digital Thematic Information) disaster background database. The technology of gathering and establishing method for '4D' disaster environment background database, application technology for flood forecasting and evaluation based on '4D' background data and experimental results for DongTing Lake test site were introduced in detail in this paper.

  9. Onde está a antropologia?

    Directory of Open Access Journals (Sweden)

    Mariza G. S. Peirano

    1997-10-01

    Full Text Available Este artigo examina o cenário da antropologia contemporânea mediante o contraste entre quatro livros publicados nos últimos anos, dois nos Estados Unidos (After the Fact, de Clifford Geertz, e Making PCR, de Paul Rabinow e dois na Índia (Pathways, de T. N. Madan, e Critical Events, de Veena Das. A comparação é realizada no contexto de uma breve etnografia das livrarias norte-americanas, na qual se avaliam algumas publicações recentes, assim como a reclassificação de disciplinas tradicionais. O papel indispensável dos autores e obras considerados clássicos é examinado no contexto atual, finalizando com uma agenda para reflexão sobre as possibilidades de comunicação entre antropólogos de várias origens e vertentes.This article examines the setting of contemporary anthropology by means of the contrast between four books recently published in the United States (After the Fact by Clifford Geertz and Making PCR by Paul Rabinow and India (Pathways by T. N. Madan and Critical Events by Veena Das. The comparison is made in the context of a brief ethnographic study of bookstores in the United States which evaluates several recent publications, as well as the reclassification of traditional disciplines. The indispensable role of the authors in works considered classics is examined in present-day context, concluding with a reflection on the possibility of communication between anthropologists of diverse backgrounds and perspectives.

  10. Evaluation of Non-Nuclear Techniques for Well Logging: Technology Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Bond, Leonard J.; Denslow, Kayte M.; Griffin, Jeffrey W.; Dale, Gregory E.; Harris, Robert V.; Moran, Traci L.; Sheen, David M.; Schenkel, Thomas

    2010-11-01

    This report presents an initial review of the state-of-the-art nuclear and non-nuclear well logging methods and seeks to understand the technical and economic issues if AmBe, and potentially other isotope sources, are reduced or even eliminated in the oil-field services industry. Prior to considering alternative logging technologies, there is a definite need to open up discussions with industry regarding the feasibility and acceptability of source replacement. Industry views appear to range from those who see AmBe as vital and irreplaceable to those who believe that, with research and investment, it may be possible to transition to electronic neutron sources and employ combinations of non-nuclear technologies to acquire the desired petro-physical parameters. In one sense, the simple answer to the question as to whether petro-physical parameters can be sensed with technologies other than AmBe is probably "Yes". The challenges come when attention turns to record interpretation. The many decades of existing records form a very valuable proprietary resource, and the interpretation of subtle features contained in these records are of significant value to the oil-gas exploration community to correctly characterize a well. The demonstration of equivalence and correspondence/correlation between established and any new sensing modality, and correlations with historic records is critical to ensuring accurate data interpretation. Establishing the technical basis for such a demonstration represents a significant effort.

  11. HISTORY AND ACCOMPLISHMENTS OF THE US EPA'S SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION (SITE) MONITORING AND MEASUREMENT (MMT) PROGRAM

    Science.gov (United States)

    This manuscript presents the history and evolution of the U.S. Environmental Protection Agency's (EPA) Superfund Innovative Technology Evaluation (SITE) Monitoring and Measurement Technology (MMT) Program. This includes a discussion of how the fundamental concepts of a performanc...

  12. A holistic model for evaluating the impact of individual technology-enhanced learning resources.

    Science.gov (United States)

    Pickering, James D; Joynes, Viktoria C T

    2016-12-01

    The use of technology within education has now crossed the Rubicon; student expectations, the increasing availability of both hardware and software and the push to fully blended learning environments mean that educational institutions cannot afford to turn their backs on technology-enhanced learning (TEL). The ability to meaningfully evaluate the impact of TEL resources nevertheless remains problematic. This paper aims to establish a robust means of evaluating individual resources and meaningfully measure their impact upon learning within the context of the program in which they are used. Based upon the experience of developing and evaluating a range of mobile and desktop based TEL resources, this paper outlines a new four-stage evaluation process, taking into account learner satisfaction, learner gain, and the impact of a resource on both the individual and the institution in which it has been adapted. A new multi-level model of TEL resource evaluation is proposed, which includes a preliminary evaluation of need, learner satisfaction and gain, learner impact and institutional impact. Each of these levels are discussed in detail, and in relation to existing TEL evaluation frameworks. This paper details a holistic, meaningful evaluation model for individual TEL resources within the specific context in which they are used. It is proposed that this model is adopted to ensure that TEL resources are evaluated in a more meaningful and robust manner than is currently undertaken.

  13. TECHNOLOGICAL DEVELOPMENT TO ELABORATE COMMON WHITE WINE IN MISIONES, WITH ECONOMIC EVALUATION AT INDUSTRIAL SCALE

    Directory of Open Access Journals (Sweden)

    Miño Valdés, Juan Esteban

    2013-01-01

    Full Text Available The objective of this paper was to develop a sustainable technology on an industrial scale to produce common white wine with non viniferous grapes cultivated in Misiones. This technological project was initiated at a laboratory scale, continued in the pilot plant and industrial-scale project. It was considered as a productive unit to 12 rural families with 27 hectares of vines each. The 8 stages followed with inductive and deductive methodology were: The development of dry white wine at laboratory scale. The evaluation of process variables in the vivification. The mathematical modeling of the alcoholic fermentation in oenological conditions. The valuation of the aptitude of wines for human consumption. The establishment of a technological procedure for wine in the pilot plant. The evaluation of the pilot plant in technological procedure established. The calculation and selection of industrial equipment. The estimate of the costs and profitability of industrial technological process. It reached a technology for a production capacity of 5,834 L day-1, with dynamic economic indicators whose values were: net present value of 6,602,666 U$D, an internal rate of return of 60 % for a period of recovery of investment to net present value of 3 years.

  14. Technological pedagogical content knowledge of prospective mathematics teachers regarding evaluation and assessment

    Directory of Open Access Journals (Sweden)

    Ercan Atasoy

    2016-04-01

    Full Text Available The ‘technology integrated assessment process’ is an innovative method to capture and determine students’ understanding of mathematics. This assessment process is claimed to provide a singular dynamism for teaching and learning activities and it is also claimed to be of the most important elements of instruction in the educational system. In this sense, this study aims to investigate technological pedagogical content knowledge (TPACK of prospective mathematics teachers regarding the ‘evaluation’ and ‘assessment’ process. To achieve this aim, the method of qualitative research was conducted with 20 teachers. Video records and lesson plans were collected and a Mathematics Teacher TPACK Development Model was utilized to reveal themes and key features of the data. The findings revealed that, although the majority of teachers stated that they would like to use technology-integrated tools in the assessment and evaluation processes, they strongly preferred to use traditional assessment and evaluation techniques, such as pen and paper activities, multiple-choice questions in virtual environments, etc. Hence, the evidence suggests that teachers would be unable to use appropriately the technological assessment process in order to reveal students’ understanding of mathematics. As seen from the teachers’ lectures, they perceived that technology would be suitable for evaluation and assessment but in a limited way.

  15. Complexity and conundrums. Citizens' evaluations of potentially contentious novel food technologies using a deliberative discourse approach.

    Science.gov (United States)

    Greehy, Gráinne M; McCarthy, Mary B; Henchion, Maeve M; Dillon, Emma J; McCarthy, Sinéad N

    2013-11-01

    This research considers the processes involved in the formation of attitudes by citizens on potentially contentious novel food technologies (NFTs). Observations of one-to-one deliberative discourses between food scientists and citizens, during which they discussed these technologies, form the basis of this enquiry. This approach enables an exploration of how individuals construct meaning around as well as interpret information about the technologies. Thematic analysis identifies key features that provide the frameworks for citizens' evaluations. How individuals make sense of these technologies is shaped by their beliefs, values and personal characteristics; their perceptions of power and control over the development and sale of NFT related products; and, the extent to which these products are relevant to their personal lives. Internal negotiations between these influences are evident, and evaluations are based on the relative importance of each influence to the individual. Internal conflicts and tensions are associated with citizens' evolving evaluative processes, which may in turn present as attitude ambivalence and instability. Many challenges are linked with engaging with the general public about these technologies, as levels of knowledge, understanding and interest vary. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. Making use of research: clinical views on an evaluation of everyday technology use.

    Science.gov (United States)

    Nygård, Louise; Kottorp, Anders; Rosenberg, Lena

    2015-01-01

    The study aim was to investigate how and when an evaluation of perceived difficulty in use of everyday technology (Everyday Technology Use Questionnaire, ETUQ) could be used in clinical occupational therapy. Eight focus-group interviews were undertaken with a total of 42 participants (occupational therapists), and data were analysed with a constant comparative approach. The findings are presented in four main categories, including (i) appropriate purposes and contexts for using ETUQ, (ii) standardization versus individual flexibility, (iii) approaching everyday technology use and occupation as one whole, and (iv) synthesizing and documentation. In conclusion, the participants considered ability to use technology to be an important topic for occupational therapy, particularly in investigations of clients with subtle disabilities and in connection with discharge from hospital - but not in inpatient care. They had different views on how to integrate ETUQ with evaluations of occupational performance, and new ideas on how information about clients' ability to use technology could be utilized in interventions. They held standardized evaluations in high regard, but a paradox appeared in that many of them would use ETUQ in a non-standardized way, while simultaneously asking for a standardized output to be used in clients' medical files and to guide interventions.

  17. Evaluation of Future Internet Technologies for Processing and Distribution of Satellite Imagery

    Science.gov (United States)

    Becedas, J.; Perez, R.; Gonzalez, G.; Alvarez, J.; Garcia, F.; Maldonado, F.; Sucari, A.; Garcia, J.

    2015-04-01

    Satellite imagery data centres are designed to operate a defined number of satellites. For instance, difficulties when new satellites have to be incorporated in the system appear. This occurs because traditional infrastructures are neither flexible nor scalable. With the appearance of Future Internet technologies new solutions can be provided to manage large and variable amounts of data on demand. These technologies optimize resources and facilitate the appearance of new applications and services in the traditional Earth Observation (EO) market. The use of Future Internet technologies for the EO sector were validated with the GEO-Cloud experiment, part of the Fed4FIRE FP7 European project. This work presents the final results of the project, in which a constellation of satellites records the whole Earth surface on a daily basis. The satellite imagery is downloaded into a distributed network of ground stations and ingested in a cloud infrastructure, where the data is processed, stored, archived and distributed to the end users. The processing and transfer times inside the cloud, workload of the processors, automatic cataloguing and accessibility through the Internet are evaluated to validate if Future Internet technologies present advantages over traditional methods. Applicability of these technologies is evaluated to provide high added value services. Finally, the advantages of using federated testbeds to carry out large scale, industry driven experiments are analysed evaluating the feasibility of an experiment developed in the European infrastructure Fed4FIRE and its migration to a commercial cloud: SoftLayer, an IBM Company.

  18. Establishment of a Quantitative Medical Technology Evaluation System and Indicators within Medical Institutions

    Directory of Open Access Journals (Sweden)

    Suo-Wei Wu

    2018-01-01

    Conclusions: As the two-round questionnaire survey of experts and statistical analysis were performed and credibility of the results was verified through consistency evaluation test, the study established a quantitative medical technology evaluation system model and assessment indicators within medical institutions based on the Delphi method and analytical hierarchy process. Moreover, further verifications, adjustments, and optimizations of the system and indicators will be performed in follow-up studies.

  19. Exploiting a wheat EST database to assess genetic diversity.

    Science.gov (United States)

    Karakas, Ozge; Gurel, Filiz; Uncuoglu, Ahu Altinkut

    2010-10-01

    Expressed sequence tag (EST) markers have been used to assess variety and genetic diversity in wheat (Triticum aestivum). In this study, 1549 ESTs from wheat infested with yellow rust were used to examine the genetic diversity of six susceptible and resistant wheat cultivars. The aim of using these cultivars was to improve the competitiveness of public wheat breeding programs through the intensive use of modern, particularly marker-assisted, selection technologies. The F(2) individuals derived from cultivar crosses were screened for resistance to yellow rust at the seedling stage in greenhouses and adult stage in the field to identify DNA markers genetically linked to resistance. Five hundred and sixty ESTs were assembled into 136 contigs and 989 singletons. BlastX search results showed that 39 (29%) contigs and 96 (10%) singletons were homologous to wheat genes. The database-matched contigs and singletons were assigned to eight functional groups related to protein synthesis, photosynthesis, metabolism and energy, stress proteins, transporter proteins, protein breakdown and recycling, cell growth and division and reactive oxygen scavengers. PCR analyses with primers based on the contigs and singletons showed that the most polymorphic functional categories were photosynthesis (contigs) and metabolism and energy (singletons). EST analysis revealed considerable genetic variability among the Turkish wheat cultivars resistant and susceptible to yellow rust disease and allowed calculation of the mean genetic distance between cultivars, with the greatest similarity (0.725) being between Harmankaya99 and Sönmez2001, and the lowest (0.622) between Aytin98 and Izgi01.

  20. Midwifery education and technology enhanced learning: Evaluating online story telling in preregistration midwifery education.

    Science.gov (United States)

    Scamell, Mandie; Hanley, Thomas

    2018-03-01

    A major issue regarding the implementation of blended learning for preregistration health programmes is the analysis of students' perceptions and attitudes towards their learning. It is the extent of the embedding of Technology Enhanced Learning (TEL) into the higher education curriculum that makes this analysis so vital. This paper reports on the quantitative results of a UK based study that was set up to respond to the apparent disconnect between technology enhanced education provision and reliable student evaluation of this mode of learning. Employing a mixed methods research design, the research described here was carried to develop a reliable and valid evaluation tool to measure acceptability of and satisfaction with a blended learning approach, specifically designed for a preregistration midwifery module offered at level 4. Feasibility testing of 46 completed blended learning evaluation questionnaires - Student Midwife Evaluation of Online Learning Effectiveness (SMEOLE) - using descriptive statistics, reliability and internal consistency tests. Standard deviations and mean scores all followed predicted pattern. Results from the reliability and internal consistency testing confirm the feasibility of SMEOLE as an effective tool for measuring student satisfaction with a blended learning approach to preregistration learning. The analysis presented in this paper suggests that we have been successful in our aim to produce an evaluation tool capable of assessing the quality of technology enhanced, University level learning in Midwifery. This work can provide future benchmarking against which midwifery, and other health, blended learning curriculum planning could be structured and evaluated. Copyright © 2017 Elsevier Ltd. All rights reserved.