WorldWideScience

Sample records for technology efforts directed

  1. Directed-energy process technology efforts

    Science.gov (United States)

    Alexander, P.

    1985-01-01

    A summary of directed-energy process technology for solar cells was presented. This technology is defined as directing energy or mass to specific areas on solar cells to produce a desired effect in contrast to exposing a cell to a thermal or mass flow environment. Some of these second generation processing techniques are: ion implantation; microwave-enhanced chemical vapor deposition; rapid thermal processing; and the use of lasers for cutting, assisting in metallization, assisting in deposition, and drive-in of liquid dopants. Advantages of directed energy techniques are: surface heating resulting in the bulk of the cell material being cooler and unchanged; better process control yields; better junction profiles, junction depths, and metal sintering; lower energy consumption during processing and smaller factory space requirements. These advantages should result in higher-efficiency cells at lower costs. The results of the numerous contracted efforts were presented as well as the application potentials of these new technologies.

  2. Geothermal Technologies Program: Direct Use

    Energy Technology Data Exchange (ETDEWEB)

    2004-08-01

    This general publication describes geothermal direct use systems, and how they have been effectively used throughout the country. It also describes the DOE program R&D efforts in this area, and summarizes several projects using direct use technology.

  3. Overview of NASA/OAST efforts related to manufacturing technology

    Science.gov (United States)

    Saunders, N. T.

    1976-01-01

    An overview of some of NASA's current efforts related to manufacturing technology and some possible directions for the future are presented. The topics discussed are: computer-aided design, composite structures, and turbine engine components.

  4. The European fusion nuclear technology effort

    International Nuclear Information System (INIS)

    Darvas, J.

    1989-01-01

    The role of fusion technology in the European fusion development strategy is outlined. The main thrust of the present fusion technology programme is responding to development needs of the Next European Torus. A smaller, but important and growing R and D effort is dealing with problems specific to the Demonstration, or Fusion Power, Reactor. The part of the programme falling under the somewhat arbitrarily defined category of 'fusion nuclear technology' is reviewed and an outlook to future activities is given. The review includes tritium technology, blanket technology and breeder materials development, technology and materials for the protection of the first wall and of other plasma facing components, remote handling technology, and safety and environmental impact studies. A few reflections are offered on the future long-term developments in fusion technology. (orig.)

  5. Significance of promoting innovative efforts and technology transfer for industry

    Energy Technology Data Exchange (ETDEWEB)

    Rembser, J [Bundesministerium fuer Forschung und Technologie, Bonn-Bad Godesberg (Germany, F.R.)

    1978-11-01

    Technological know how and innovations will be of considerable future importance for West German industry. Changes in the reliability of sources of supply (energy, raw materials), the burden imposed on the environment by intensive industrial production and numerous private sources, and the stiffening of international competition necessitate cLoser collaboration between industry and government. Public aid in research and development efforts will assume an important role. In West Germany there is a wide variety of such governmental aids. The range extends from direct grants to enterprises for research and development work to the furnishing of advice to promote innovative efforts and technology transfer. Banks provide risk capital with governmental aid to firms trying to indroduce high-risk innovations into the market. In recent years the aim has been to provide small and medium-size firms with better access to technological know how and governmental aids.

  6. Do Haphazard Reviews Provide Sound Directions for Dissemination Efforts?

    Science.gov (United States)

    Gambrill, Eileen; Littell, Julia H.

    2010-01-01

    Comments on The dissemination and implementation of evidence-based psychological treatments: A review of current efforts by Kathryn R. McHugh and David H. Barlow. The lead article in the February-March issue by McHugh and Barlow (2010) emphasized the need for "dissemination and implementation of evidence-based psychological treatments."…

  7. Korean efforts for education and training network in nuclear technology

    International Nuclear Information System (INIS)

    Han, Kyong-Won; Lee, Eui-Jin

    2007-01-01

    Nuclear energy has been a backbone for Korea's remarkable economic growth, and will continue its essential role with 18 nuclear power plants in operation, 2 more units under construction, 6 more units in planning. Korea is operating its own designed nuclear power plants, such as KSNP, 1400, as well as self-design and operation of 30 MW Hanaro research reactor. Korea makes strong efforts to develop future nuclear technology. They are the System-Integrated Modular Advanced Reactor, SMART, Korea Advanced Liquid Metal reactor, KALIMER, Hydrogen Production reactor, and Proliferation-resistant Nuclear Fuel Cycle. In parallel, Korea is establishing an Advanced Radiation Technology R and D Center and a High Power Proton Accelerator Center. International, next generation nuclear power technologies are being developed through projects such as the IAEA Innovative Nuclear Reactors and Fuel Cycle, INPRO, Generation IV International Forum, GIF, and International thermonuclear Experimental reactor, ITER. In the new millennium, Korea expects that radiation technology combined with bio, nano, and space technology will sustain our civilization. About 21,000 qualified nuclear human resources are engaged in power and non-power fields such as design and manufacturing of equipment, plant operation and maintenance, safety, RI production, R and D, etc. However, it is recognized that the first generation of nuclear work force is getting older and retired, less of our youth are studying nuclear science and engineering. Korean Government has established a promotion program on nuclear human resources development, which is needed until 2010. For the sustainable development of nuclear science and technology, it calls for more qualified human resources. We ought to encourage our youth to become more interested in nuclear studies and careers. Korea is making strong efforts to support nuclear education and training for young generations. It is believed that internationally accepted advanced

  8. Cyberbullying Prevention and Intervention Efforts: Current Knowledge and Future Directions

    Science.gov (United States)

    Hong, Jun Sung

    2016-01-01

    Bullying is a serious public health concern that is associated with significant negative mental, social, and physical outcomes. Technological advances have increased adolescents’ use of social media, and online communication platforms have exposed adolescents to another mode of bullying—cyberbullying. Prevention and intervention materials, from websites and tip sheets to classroom curriculum, have been developed to help youth, parents, and teachers address cyberbullying. While youth and parents are willing to disclose their experiences with bullying to their health care providers, these disclosures need to be taken seriously and handled in a caring manner. Health care providers need to include questions about bullying on intake forms to encourage these disclosures. The aim of this article is to examine the current status of cyberbullying prevention and intervention. Research support for several school-based intervention programs is summarised. Recommendations for future research are provided. PMID:28562094

  9. Cyberbullying Prevention and Intervention Efforts: Current Knowledge and Future Directions.

    Science.gov (United States)

    Espelage, Dorothy L; Hong, Jun Sung

    2017-06-01

    Bullying is a serious public health concern that is associated with significant negative mental, social, and physical outcomes. Technological advances have increased adolescents' use of social media, and online communication platforms have exposed adolescents to another mode of bullying- cyberbullying. Prevention and intervention materials, from websites and tip sheets to classroom curriculum, have been developed to help youth, parents, and teachers address cyberbullying. While youth and parents are willing to disclose their experiences with bullying to their health care providers, these disclosures need to be taken seriously and handled in a caring manner. Health care providers need to include questions about bullying on intake forms to encourage these disclosures. The aim of this article is to examine the current status of cyberbullying prevention and intervention. Research support for several school-based intervention programs is summarised. Recommendations for future research are provided.

  10. Efforts onto electricity and instrumentation technology for nuclear power generation

    International Nuclear Information System (INIS)

    Hayakawa, Toshifumi

    2000-01-01

    Nuclear power generation shares more than 1/3 of all amounts of in-land generation at present, as a supplying source of stable electric energy after 2000 either. As a recent example of efforts onto electricity and instrumentation technology for nuclear power generation, there are, on instrumentation control system a new central control board aiming at reduction of operator's load, protection of human error, and upgrading of system reliability and economics by applying high level micro-processor applied technique and high speed data transfer technique to central monitoring operation and plant control protection, on a field of reactor instrumentation a new digital control rod position indicator improved of conventional system on a base of operation experience and recent technology, on a field of radiation instrumentation a new radiation instrumentation system accumulating actual results in a wide application field on a concept of application to nuclear power plant by adopting in-situ separation processing system using local network technique, and on a field of operation maintenance and management a conservation management system for nuclear generation plant intending of further effectiveness of operation maintenance management of power plant by applying of operation experience and recent data processing and communication technology. And, in the large electric apparatus, there are some generators carried out production and verification of a model one with actual size in lengthwise dimension, to correspond to future large capacity nuclear power plant. By this verification, it was proved that even large capacity generator of 1800 MVA class could be manufactured. (G.K.)

  11. New directions for veterinary technology.

    Science.gov (United States)

    Chadderdon, Linda M; Lloyd, James W; Pazak, Helene E

    2014-01-01

    Veterinary technology has generally established itself well in companion-animal and mixed-animal veterinary medical practice, but the career's growth trajectory is uncertain. Michigan State University (MSU) convened a national conference, "Creating the Future of Veterinary Technology-A National Dialogue," in November 2011 to explore ways to elevate the veterinary technician/technologist's role in the veterinary medical profession and to identify new directions in which the career could expand. Veterinary technicians/technologists might advance their place in private practice by not only improving their clinical skills, but by also focusing on areas such as practice management, leadership training, business training, conflict resolution, information technology, and marketing/communications. Some new employment settings for veterinary technicians/technologists include more participation within laboratory animal medicine and research, the rural farm industry, regulatory medicine, and shelter medicine. Achieving these ends would call for new training options beyond the current 2-year and 4-year degree programs. Participants suggested specialty training programs, hybrid programs of various types, online programs, veterinary technician residency programs of 12-18 months, and more integration of veterinary technician/technology students and veterinary medicine students at colleges of veterinary medicine.

  12. Cleaner Technology in Denmark - support measures and regulatory efforts

    DEFF Research Database (Denmark)

    Jørgensen, Ulrik

    2005-01-01

    Danish cleaner technology support policies have been successful in fostering innovations that reduce the invironmental impact of products and production. But the lack of enforcement support for cleaner technology in environmental permits has limited the overall impact....

  13. Goddard Technology Efforts to Improve Space Borne Laser Reliability

    Science.gov (United States)

    Heaps, William S.

    2006-01-01

    In an effort to reduce the risk, perceived and actual, of employing instruments containing space borne lasers NASA initiated the Laser Risk Reduction Program (LRRP) in 2001. This program managed jointly by NASA Langley and NASA Goddard and employing lasers researchers from government, university and industrial labs is nearing the conclusion of its planned 5 year duration. This paper will describe some of the efforts and results obtained by the Goddard half of the program.

  14. HTGR technology development: status and direction

    International Nuclear Information System (INIS)

    Kasten, P.R.

    1982-01-01

    During the last two years there has been an extensive and comprehensive effort expended primarily by General Atomic (GA) in generating a revised technology development plan. Oak Ridge National Laboratory (ORNL) has assisted in this effort, primarily through its interactions over the past years in working together with GA in technology development, but also through detailed review of the initial versions of the technology development plan as prepared by GA. The plan covers Fuel Technology, Materials Technology (including metals, graphite, and ceramics), Plant Technology (including methods, safety, structures, systems, heat exchangers, control and electrical, and mechanical), and Component Design Verification and Support areas

  15. Direct digital conversion detector technology

    Science.gov (United States)

    Mandl, William J.; Fedors, Richard

    1995-06-01

    Future imaging sensors for the aerospace and commercial video markets will depend on low cost, high speed analog-to-digital (A/D) conversion to efficiently process optical detector signals. Current A/D methods place a heavy burden on system resources, increase noise, and limit the throughput. This paper describes a unique method for incorporating A/D conversion right on the focal plane array. This concept is based on Sigma-Delta sampling, and makes optimum use of the active detector real estate. Combined with modern digital signal processors, such devices will significantly increase data rates off the focal plane. Early conversion to digital format will also decrease the signal susceptibility to noise, lowering the communications bit error rate. Computer modeling of this concept is described, along with results from several simulation runs. A potential application for direct digital conversion is also reviewed. Future uses for this technology could range from scientific instruments to remote sensors, telecommunications gear, medical diagnostic tools, and consumer products.

  16. Improving the Army’s Next Effort in Technology Forecasting

    Science.gov (United States)

    2010-09-01

    DC: Center for Technology and National Security Policy, National Defense University, August 2005). 6 James D. Watson and Francis Crick , “A...occurred within the life sciences disciplines. Most notably this occurred early on in 1953 via the discovery of DNA’s double helix structure by Watson and... Crick .6 A confluence of organic chemistry, physics, genomics, and information technology further provided the ability to amplify and replicate the

  17. The uncounted benefits: Federal efforts in domestic technology transfer

    Science.gov (United States)

    Chapman, R. L.; Hirst, K.

    1986-01-01

    Organized technology transfer activities conducted by the agencies of the U.S. government are described. The focus is upon agency or departmental level activity rather than the laboratory level. None of the programs on which information was collected has been assessed or evaluated individually. However, the aggregate programs of the government have been judged in terms of obvious gaps and opportunities for future improvement. An overview, descriptions of the various agency or department programs of technology transfer, a list of persons interviewed or consulted during the survey, and a bibliography of publications, reports and other material made available to the study staff are given. An extensive appendix of illustrative material collected from the various programs is also given.

  18. European Technological Effort in Preparation of ITER Construction

    International Nuclear Information System (INIS)

    Andreani, Roberto

    2005-01-01

    Europe has started since the '80s with the preparatory work done on NET, the Next European Torus, the successor of JET, to prepare for the construction of the next generation experiment on the road to the fusion reactor. In 2000 the European Fusion Development Agreement (EFDA) has been signed by sixteen countries, including Switzerland, not a member of the Union. Now the signatory countries have increased to twenty-five. A vigorous programme of design and R and D in support of ITER construction has been conducted by EFDA through the coordinated effort of the national institutes and laboratories supported financially, in the framework of the VI European Framework Research Programme (2002-2006), by contracts of association with EURATOM. In the last three years, with the expenditure of 160 M[Euro], the accent has been particularly put on the preparation of the industrial manufacturing activities of components and systems for ITER. Prototypes and manufacturing methods have been developed in all the main critical areas of machine construction with the objective of providing sound and effective solutions: vacuum vessel, toroidal field coils, poloidal field coils, remote handling equipment, plasma facing components and divertor components, electrical power supplies, generators and power supplies for the Heating and Current Drive Systems and other minor subsystems.Europe feels to be ready to host the ITER site and to provide adequate support and guidance for the success of construction to our partners in the ITER collaboration, wherever needed

  19. Robotic Technology Efforts at the NASA/Johnson Space Center

    Science.gov (United States)

    Diftler, Ron

    2017-01-01

    The NASA/Johnson Space Center has been developing robotic systems in support of space exploration for more than two decades. The goal of the Center’s Robotic Systems Technology Branch is to design and build hardware and software to assist astronauts in performing their mission. These systems include: rovers, humanoid robots, inspection devices and wearable robotics. Inspection systems provide external views of space vehicles to search for surface damage and also maneuver inside restricted areas to verify proper connections. New concepts in human and robotic rovers offer solutions for navigating difficult terrain expected in future planetary missions. An important objective for humanoid robots is to relieve the crew of “dull, dirty or dangerous” tasks allowing them more time to perform their important science and exploration missions. Wearable robotics one of the Center’s newest development areas can provide crew with low mass exercise capability and also augment an astronaut’s strength while wearing a space suit.This presentation will describe the robotic technology and prototypes developed at the Johnson Space Center that are the basis for future flight systems. An overview of inspection robots will show their operation on the ground and in-orbit. Rovers with independent wheel modules, crab steering, and active suspension are able to climb over large obstacles, and nimbly maneuver around others. Humanoid robots, including the First Humanoid Robot in Space: Robonaut 2, demonstrate capabilities that will lead to robotic caretakers for human habitats in space, and on Mars. The Center’s Wearable Robotics Lab supports work in assistive and sensing devices, including exoskeletons, force measuring shoes, and grasp assist gloves.

  20. MBR Technology: future research directions

    NARCIS (Netherlands)

    Brouwer, H.; Temmink, B.G.; Remy, M.J.J.; Geilvoet, S.

    2005-01-01

    Cutting down the operational costs of MBR technology will be the key driver for research. This article outlines some research areas and specific topics that potentially will contribute to lower costs. Special attention to these topics should be given the coming years. Long term research should focus

  1. Direct and Indirect Effects of Marketing Effort on Brand Awareness and Brand Image.

    OpenAIRE

    Villarejo Ramos, Ángel Francisco; Rondán Cataluña, Francisco Javier; Sánchez Franco, Manuel Jesús

    2008-01-01

    The marketing effort orientated to towards strengthening the brand means to increase the degree of knowledge of the brand name. In this paper we want to show the relationship between brand awareness and brand image. Starting out from a theoretical review, we set out a model of direct and indirect effects of the marketing effort-as the brand's antecedents-on brand awareness and brand image. Via the empirical support used, a questionnaire of a sample of consumers, we try to find out how the mar...

  2. Launch Effort and NPD Success: A Study of Technology Intensive Companies in Finland

    OpenAIRE

    Matti J. Haverila; Nicholas Ashill

    2014-01-01

    In this paper, we present an exploratory investigation of the types of product launch tactics managers use in technology-intensive companies in Finland and explore the role that such tactics play in differentiating between successful and unsuccessful NPD outcomes. Our findings indicate that managers perceive two types of tactical product launch tactics during the NPD process, which we label "promotions and sales-distribution effort" and "production start-up effort". All tactical launch effort...

  3. Personal Professional Development Efforts of Science and Technology Teachers in Their Fields

    Science.gov (United States)

    Bilgin, Aysegul; Balbag, Mustafa Zafer

    2018-01-01

    The aim of this study is to examine the personal professional development efforts of science and technology teachers in their fields with regard to some variables. These variables were determined as gender, year of seniority and sufficiency level of the laboratory equipment. Moreover, the relation between the actual efforts exerted by science and…

  4. 1997 Annual report. Technological Research Direction

    International Nuclear Information System (INIS)

    Instituto Nacional de Investigaciones Nucleares

    1998-01-01

    This document describes the results for one year of work. Here is presented the goals of the Technological Research Direction of the National Institute of Nuclear Research in Mexico, which is promoting and developing the production of high technologies in the nuclear sciences and related disciplines as well as to generate the technologies, products, quality insume for academic organizations, health, industrial and commercial that are required. (Author)

  5. Exploration Technology Program plans and directions

    Science.gov (United States)

    Aldrich, A.; Rosen, R.; Craig, M.; Mankins, J. C.

    During the first part of the next century, the United States will return to the Moon to create a permanent lunar base, and, before the year 2019, we will send a human mission to Mars. In addition to these human operations, the Space Exploration Initiative will integrally incorporate robotic lunar and Mars missions. In achieving these efforts to expand human presence and activity in space and also exerted and frontiers of human knowledge, the SEI will require an array of new technologies. Mission architecture definition is still underway, but previous studies indicate that the SEI will require developments in areas such as advanced engines for space transportation, in-space assembly and construction to support permanent basing of exploration systems in space, and advanced surface operations capabilities including adequate levels of power and surface roving vehicles, and technologies to support safely long-duration human operations in space. Plans are now being put into place to implement an Exploration Technology Program (ETP) which will develop the major technologies needed for SEI. In close coordination with other ongoing U.S. government research and development efforts, the ETP will provide in the near term clear demonstrations of potential exploration technologies, research results to support SEI architecture decisions, and a foundation of mature technology that is ready to be applied in the first round of SEI missions. In addition to the technology needed for the first round of SEI missions, the ETP will also put in place a foundation of research for longer-term technology needs—ultimately leading the human missions to Mars. The Space Exploration Initiative and the Exploration Technology Program will challenge the best and the brightest minds across government, industry and academia, inspiring students of all ages and making possible future terrestial applications of SEI technologies that may create whole new industries for the future.

  6. Personal Professional Development Efforts Scale for Science and Technology Teachers Regarding Their Fields

    Science.gov (United States)

    Bilgin, Aysegül; Balbag, Mustafa Zafer

    2016-01-01

    This study has developed "Personal Professional Development Efforts Scale for Science and Technology Teachers Regarding Their Fields". Exploratory factor analysis of the scale has been conducted based on the data collected from 200 science and technology teachers across Turkey. The scale has been observed through varimax rotation method,…

  7. Chile and Its Efforts to Present High-Level Technologies to the Developed World

    Science.gov (United States)

    Young, Nathan

    2007-01-01

    Chile is rich in natural resources. Like many other resource-dependent nations, it has never made technology transfer a subject of intense focus. This article sheds light on the technological state of Chile today and its efforts to promote development, increase innovation and move towards a knowledge-based economy. The paper summarizes current…

  8. Zero Effort Technologies Considerations, Challenges, and Use in Health, Wellness, and Rehabilitation

    CERN Document Server

    Mihailidis, Alex; Hoey, Jesse

    2011-01-01

    This book introduces zero-effort technologies (ZETs), an emerging class of technology that requires little or no effort from the people who use it. ZETs use advanced techniques, such as computer vision, sensor fusion, decision-making and planning, and machine learning to autonomously operate through the collection, analysis, and application of data about the user and his/her context. This book gives an overview of ZETs, presents concepts in the development of pervasive intelligent technologies and environments for health and rehabilitation, along with an in-depth discussion of the design princ

  9. Variation of fee-for-service specialist direct care work effort with patient overall illness burden.

    Science.gov (United States)

    Goodman, Robert

    2011-08-01

    To explore whether a common industry measure of overall patient illness burden, used to assess the total costs of members in a health plan, would be suitable to describe variation in a summary metric of utilization that assesses specialist physician direct patient care services not grouped into clinical episodes, but with exclusion criteria applied to reduce any bias in the data. Data sources/study setting Calendar year 2006 administrative data on 153,557 commercial members enrolled in a non-profit single-state statewide Health Maintenance Organization (HMO) and treated by 4356 specialists in 11 specialties. The health plan's global referral process and specialist fee-for-service reimbursement likely makes these results applicable to the non-managed care setting, as once a global referral was authorized there was no required intervention by the HMO or referring primary care provider for the majority of any subsequent specialist direct clinical care. Study design Specialty-specific correlations and ordinary least-squares regression models to assess variations in specialist direct patient care work effort with patient overall illness burden, after the application of exclusion criteria to reduce potential bias in the data. Principle findings Statistically significant positive correlations exist between specialist direct patient care work effort and patient overall illness burden for all studied specialties. Regression models revealed a generally monotonic increasing relationship between illness burden categories and aggregate specialist direct patient care work effort. Almost all regression model differences from the reference category across specialties are statistically significant (P ≤ 0.012). Assessment of additional results demonstrates the relationship has more substantive significance in some specialties and less in others. The most substantive relationships in this study were found in the specialties of orthopaedic surgery, general surgery and interventional

  10. Nanoscale Science, Engineering and Technology Research Directions

    Energy Technology Data Exchange (ETDEWEB)

    Lowndes, D. H.; Alivisatos, A. P.; Alper, M.; Averback, R. S.; Jacob Barhen, J.; Eastman, J. A.; Imre, D.; Lowndes, D. H.; McNulty, I.; Michalske, T. A.; Ho, K-M; Nozik, A. J.; Russell, T. P.; Valentin, R. A.; Welch, D. O.; Barhen, J.; Agnew, S. R.; Bellon, P.; Blair, J.; Boatner, L. A.; Braiman, Y.; Budai, J. D.; Crabtree, G. W.; Feldman, L. C.; Flynn, C. P.; Geohegan, D. B.; George, E. P.; Greenbaum, E.; Grigoropoulos, C.; Haynes, T. E.; Heberlein, J.; Hichman, J.; Holland, O. W.; Honda, S.; Horton, J. A.; Hu, M. Z.-C.; Jesson, D. E.; Joy, D. C.; Krauss, A.; Kwok, W.-K.; Larson, B. C.; Larson, D. J.; Likharev, K.; Liu, C. T.; Majumdar, A.; Maziasz, P. J.; Meldrum, A.; Miller, J. C.; Modine, F. A.; Pennycook, S. J.; Pharr, G. M.; Phillpot, S.; Price, D. L.; Protopopescu, V.; Poker, D. B.; Pui, D.; Ramsey, J. M.; Rao, N.; Reichl, L.; Roberto, J.; Saboungi, M-L; Simpson, M.; Strieffer, S.; Thundat, T.; Wambsganss, M.; Wendleken, J.; White, C. W.; Wilemski, G.; Withrow, S. P.; Wolf, D.; Zhu, J. H.; Zuhr, R. A.; Zunger, A.; Lowe, S.

    1999-01-01

    This report describes important future research directions in nanoscale science, engineering and technology. It was prepared in connection with an anticipated national research initiative on nanotechnology for the twenty-first century. The research directions described are not expected to be inclusive but illustrate the wide range of research opportunities and challenges that could be undertaken through the national laboratories and their major national scientific user facilities with the support of universities and industry.

  11. Five disruptive technology directions for 5G

    DEFF Research Database (Denmark)

    Boccardi, Federico; W. Heath Jr., Robert; Lozano, Angel

    2014-01-01

    New research directions will lead to fundamental changes in the design of future fifth generation (5G) cellular networks. This article describes five technologies that could lead to both architectural and component disruptive design changes: device-centric architectures, millimeter wave, massive ...

  12. Methodological Considerations When Quantifying High-Intensity Efforts in Team Sport Using Global Positioning System Technology.

    Science.gov (United States)

    Varley, Matthew C; Jaspers, Arne; Helsen, Werner F; Malone, James J

    2017-09-01

    Sprints and accelerations are popular performance indicators in applied sport. The methods used to define these efforts using athlete-tracking technology could affect the number of efforts reported. This study aimed to determine the influence of different techniques and settings for detecting high-intensity efforts using global positioning system (GPS) data. Velocity and acceleration data from a professional soccer match were recorded via 10-Hz GPS. Velocity data were filtered using either a median or an exponential filter. Acceleration data were derived from velocity data over a 0.2-s time interval (with and without an exponential filter applied) and a 0.3-second time interval. High-speed-running (≥4.17 m/s 2 ), sprint (≥7.00 m/s 2 ), and acceleration (≥2.78 m/s 2 ) efforts were then identified using minimum-effort durations (0.1-0.9 s) to assess differences in the total number of efforts reported. Different velocity-filtering methods resulted in small to moderate differences (effect size [ES] 0.28-1.09) in the number of high-speed-running and sprint efforts detected when minimum duration was GPS. Changes to how high-intensity efforts are defined affect reported data. Therefore, consistency in data processing is advised.

  13. Breaching the Fortress Wall. Understanding Terrorist Efforts to Overcome Defensive Technologies

    Science.gov (United States)

    2007-01-01

    that affect, in overlapping ways, sequential parts of the terrorist activity chain (Figure 1.2). The purposes of each of these types of technologies...fication lineup .51 The ways in which PIRA chose to manage operations also contrib- uted to its overall counterforensic effort. For example, although

  14. Information Technology Management: Hurricane Katrina Disaster Recovery Efforts Related to Army Information Technology Resources

    National Research Council Canada - National Science Library

    Jolliffe, Richard B; Burton, Bruce A; Wicecarver, Jacqueline L; Kince, Therese M; Ryan, Susan R; Price, Matthew J; Cleveland, Karma J; N. Pugh, Jacqueline; Milner, Jillisa H; Johnson, Meredith H

    2006-01-01

    ... of Louisiana, Mississippi, Alabama, and Florida with Category 3 winds and torrential rain. This audit report is the first in a planned series of audits on the effects of Hurricane Katrina on DoD information technology resources...

  15. DARPA-funded efforts in the development of novel brain-computer interface technologies.

    Science.gov (United States)

    Miranda, Robbin A; Casebeer, William D; Hein, Amy M; Judy, Jack W; Krotkov, Eric P; Laabs, Tracy L; Manzo, Justin E; Pankratz, Kent G; Pratt, Gill A; Sanchez, Justin C; Weber, Douglas J; Wheeler, Tracey L; Ling, Geoffrey S F

    2015-04-15

    The Defense Advanced Research Projects Agency (DARPA) has funded innovative scientific research and technology developments in the field of brain-computer interfaces (BCI) since the 1970s. This review highlights some of DARPA's major advances in the field of BCI, particularly those made in recent years. Two broad categories of DARPA programs are presented with respect to the ultimate goals of supporting the nation's warfighters: (1) BCI efforts aimed at restoring neural and/or behavioral function, and (2) BCI efforts aimed at improving human training and performance. The programs discussed are synergistic and complementary to one another, and, moreover, promote interdisciplinary collaborations among researchers, engineers, and clinicians. Finally, this review includes a summary of some of the remaining challenges for the field of BCI, as well as the goals of new DARPA efforts in this domain. Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.

  16. Technology innovation efforts in the mining oligopoly; Efforts d'innovations technologiques dans l'oligopole minier

    Energy Technology Data Exchange (ETDEWEB)

    Poudou, J.Ch.

    2002-06-01

    In non-renewable resources economy, the analysis of innovation focusses mainly on the tactical and strategical relevance of the use of a substitution technology (backstop). However, in the world petroleum industry the technological evolution of the production system explains the evolution of the offer forces: some technologies allow to reduce the extraction costs, while some others allow to valorize the hardly accessible resources (accessibility technologies). This paper makes a micro-economical analysis of the R and D characteristics in the oligopolistic framework of the non-renewable resources market. In the first part, an analysis of the mining oligopoly with perfectly defined property rights is made. In the second part a useful version of the results of the cost reducing R and D analysis is given and crossed with the first analysis by analysing the continuous cost reducing R and D inside a range of mining oligopolies. In the last section, the same analysis is reproduced but for a continuous R and D of accessibility technologies. (J.S.)

  17. Index of Effort: An Analytical Model for Evaluating and Re-Directing Student Recruitment Activities for a Local Community College.

    Science.gov (United States)

    Landini, Albert J.

    This index of effort is proposed as a means by which those in charge of student recruitment activities at community colleges can be sure that their efforts are being directed toward all of the appropriate population. The index is an analytical model based on the concept of socio-economic profiles, using small area 1970 census data, and is the…

  18. The National Institute of Justice's Technology Efforts to Meet the Evolving Needs of the Responder Community

    Science.gov (United States)

    Boyd, D.

    2002-05-01

    The National Institute of Justice (NIJ) is the research arm of the Department of Justice. Through its Office of Science & Technology (OS&T), NIJ has actively pursued development of better tools for public safety agencies to combat terrorism since 1997, when, pursuant to the Anti-Terrorism and Effective Penalty Act of 1996 (P.L. 104 -132), it began development of technology to better enable law enforcement agencies to combat terrorism. NIJ quickly realized that effectively combating terrorism required a multi disciplinary, multi agency response. Additionally, it came to understand that, as noted by the Gilmore Commission, the best way to prepare the responder community to deal with the consequences of terrorist incidents, was to ``emphasize programs and initiatives that build appropriately on existing State and local capabilities for other emergencies and disasters.'' For example, an effective critical incident management system is just as important to the ability to deal with a terrorist attack, such as occurred at the World Trade Center, as with a major natural disaster or the crash of a commercial airliner or passenger train. Consequently, NIJ's efforts have evolved to focus on the responder community's common, unaddressed needs for better tools to deal with critical incidents. The Institutes efforts focus on five technology areas: infrastructure security, personnel location, explosives detection and remediation, communications and information technology and training, and development of standards.

  19. Formulation Efforts for Direct Vitrification of INEEL Blend Calcine Waste Simulate: Fiscal Year 2000

    International Nuclear Information System (INIS)

    Crum, Jarrod V; Vienna, John D; Peeler, David K

    2001-01-01

    The TFA uses a systematic process for developing its annual program that draws from the tanks science and technology development needs expressed by the five DOE tank waste sites. TFA's annual program development process is iterative and involves the following steps: Collection of site needs; Needs analysis; Development of technical responses and initial prioritization; Refinement of the program for the next fiscal year; Formulation of the Corporate Review Budget (CRB); Preparation of Program Execution Guidance (PEG) for the next FY Revision of the Multiyear Program Plan (MYPP). This document describes the outcomes of the first phase of this process, from collection of site needs to the initial prioritization of technical activities. The TFA received site needs in October- December 2000. A total of 170 site needs were received, an increase of 30 over the previous year. The needs were analyzed and integrated, where appropriate. Sixty-six distinct technical responses were drafted and prioritized. In addition, seven strategic tasks were approved to compete for available funding in FY 2002 and FY 2003. Draft technical responses were prepared and provided to the TFA Site Representatives and the TFA User Steering Group (USG) for their review and comment. These responses were discussed at a March 15, 2001, meeting where the TFA Management Team established the priority listing in preparation for input to the DOE Office of Science and Technology (OST) budget process. At the time of publication of this document, the TFA continues to finalize technical responses as directed by the TFA Management Team and clarify the intended work scopes for FY 2002 and FY 2003

  20. ARV robotic technologies (ART): a risk reduction effort for future unmanned systems

    Science.gov (United States)

    Jaster, Jeffrey F.

    2006-05-01

    The Army's ARV (Armed Robotic Vehicle) Robotic Technologies (ART) program is working on the development of various technological thrusts for use in the robotic forces of the future. The ART program will develop, integrate and demonstrate the technology required to advance the maneuver technologies (i.e., perception, mobility, tactical behaviors) and increase the survivability of unmanned platforms for the future force while focusing on reducing the soldiers' burden by providing an increase in vehicle autonomy coinciding with a decrease in the total number user interventions required to control the unmanned assets. This program will advance the state of the art in perception technologies to provide the unmanned platform an increasingly accurate view of the terrain that surrounds it; while developing tactical/mission behavior technologies to provide the Unmanned Ground Vehicle (UGV) the capability to maneuver tactically, in conjunction with the manned systems in an autonomous mode. The ART testbed will be integrated with the advanced technology software and associated hardware developed under this effort, and incorporate appropriate mission modules (e.g. RSTA sensors, MILES, etc.) to support Warfighter experiments and evaluations (virtual and field) in a military significant environment (open/rolling and complex/urban terrain). The outcome of these experiments as well as other lessons learned through out the program life cycle will be used to reduce the current risks that are identified for the future UGV systems that will be developed under the Future Combat Systems (FCS) program, including the early integration of an FCS-like autonomous navigation system onto a tracked skid steer platform.

  1. The case for a directional dark matter detector and the status of current experimental efforts

    CERN Document Server

    Ahlen, S; Battat, J B R; Billard, J; Bozorgnia, N; Burgos, S; Caldwell, T; Carmona, J M; Cebrián, S; Colas, P; Dafni, T; Daw, E; Dujmic, D; Dushkin, A; Fedus, W; Ferrer, E; Finkbeiner, D; Fisher, P H; Forbes, J; Fusayasu, T; Galan, J; Gamble, T; Ghag, C; Giomataris, Yu; Gold, M; Gomez, H; Gómez, M E; Gondolo, P; Green, A; Grignon, C; Guillaudin, O; Hagemann, C; Hattori, K; Henderson, S; Higashi, N; Ida, C; Iguaz, F J; Inglis, A; Irastorza, I G; Iwaki, S; Kaboth, A; Kabuki, S; Kadyk, J; Kallivayalil, N; Kubo, H; Kurosawa, S; Kudryavtsev, V A; Lamy, T; Lanza, R; Lawson, T B; Lee, A; Lee, E R; Lin, T; Loomba, D; López, J; Luzón, G; Manobu, T; Martoff, J; Mayet, F; McCluskey, B; Miller, E; Miuchi, K; Monroe, J; Morgan, B; Muna, D; Murphy, A St J; Naka, T; Nakamura, K; Nakamura, M; Nakano, T; Nicklin, G G; Nishimura, H; Niwa, K; Paling, S M; Parker, J; Petkov, A; Pipe, M; Pushkin, K; Robinson, M; Rodríguez, A; Rodríguez-Quintero, J; Sahin, T; Sanderson, R; Sanghi, N; Santos, D; Sato, O; Sawano, T; Sciolla, G; Sekiya, H; Slatyer, T R; Snowden-Ifft, D P; Spooner, N J C; Sugiyama, A; Takada, A; Takahashi, M; Takeda, A; Tanimori, T; Taniue, K; Tomas, A; Tomita, H; Tsuchiya, K; Turk, J; Tziaferi, E; Ueno, K; Vahsen, S; Vanderspek, R; Vergados, J; Villar, J A; Wellenstein, H; Wolfe, I; Yamamoto, R K; Yegoryan, H

    2010-01-01

    We present the case for a dark matter detector with directional sensitivity. This document was developed at the 2009 CYGNUS workshop on directional dark matter detection, and contains contributions from theorists and experimental groups in the field. We describe the need for a dark matter detector with directional sensitivity; each directional dark matter experiment presents their project's status; and we close with a feasibility study for scaling up to a one ton directional detector, which would cost around $150M.

  2. Impact of Hearing Aid Technology on Outcomes in Daily Life II: Speech Understanding and Listening Effort.

    Science.gov (United States)

    Johnson, Jani A; Xu, Jingjing; Cox, Robyn M

    2016-01-01

    Modern hearing aid (HA) devices include a collection of acoustic signal-processing features designed to improve listening outcomes in a variety of daily auditory environments. Manufacturers market these features at successive levels of technological sophistication. The features included in costlier premium hearing devices are designed to result in further improvements to daily listening outcomes compared with the features included in basic hearing devices. However, independent research has not substantiated such improvements. This research was designed to explore differences in speech-understanding and listening-effort outcomes for older adults using premium-feature and basic-feature HAs in their daily lives. For this participant-blinded, repeated, crossover trial 45 older adults (mean age 70.3 years) with mild-to-moderate sensorineural hearing loss wore each of four pairs of bilaterally fitted HAs for 1 month. HAs were premium- and basic-feature devices from two major brands. After each 1-month trial, participants' speech-understanding and listening-effort outcomes were evaluated in the laboratory and in daily life. Three types of speech-understanding and listening-effort data were collected: measures of laboratory performance, responses to standardized self-report questionnaires, and participant diary entries about daily communication. The only statistically significant superiority for the premium-feature HAs occurred for listening effort in the loud laboratory condition and was demonstrated for only one of the tested brands. The predominant complaint of older adults with mild-to-moderate hearing impairment is difficulty understanding speech in various settings. The combined results of all the outcome measures used in this research suggest that, when fitted using scientifically based practices, both premium- and basic-feature HAs are capable of providing considerable, but essentially equivalent, improvements to speech understanding and listening effort in daily

  3. Cryogenic Fluid Storage Technology Development: Recent and Planned Efforts at NASA

    Science.gov (United States)

    Moran, Matthew E.

    2009-01-01

    Recent technology development work conducted at NASA in the area of Cryogenic Fluid Management (CFM) storage is highlighted, including summary results, key impacts, and ongoing efforts. Thermodynamic vent system (TVS) ground test results are shown for hydrogen, methane, and oxygen. Joule-Thomson (J-T) device tests related to clogging in hydrogen are summarized, along with the absence of clogging in oxygen and methane tests. Confirmation of analytical relations and bonding techniques for broad area cooling (BAC) concepts based on tube-to-tank tests are presented. Results of two-phase lumped-parameter computational fluid dynamic (CFD) models are highlighted, including validation of the model with hydrogen self pressurization test data. These models were used to simulate Altair representative methane and oxygen tanks subjected to 210 days of lunar surface storage. Engineering analysis tools being developed to support system level trades and vehicle propulsion system designs are also cited. Finally, prioritized technology development risks identified for Constellation cryogenic propulsion systems are presented, and future efforts to address those risks are discussed.

  4. MAPPING POTENTIAL TECHNOLOGY APPROPRIATE SMALL AND MEDIUM ENTERPRISES AS EFFORTS TO IMPROVE TECHNOLOGY PREPARATION LEADERSHIP IN REGION OF PONOROGO

    Directory of Open Access Journals (Sweden)

    Rochmat Aldy Purnomo

    2017-10-01

    Full Text Available Research Objectives "Mapping the Potential of Appropriate Technology for Small and Medium Enterprises as an Effort to Improve the Capability of Technology Readiness in Ponorogo District" is to describe the profile of small and medium enterprises (SMEs, evaluate and measure the level of technological readiness ability (TK2T of SMEs in Ponorogo District. The analytical tool used is a technometer that serves to measure the level of technological readiness capability used for the production of SMEs divided into three stages, basic (level 1 to level 3, medium (level 4 to level 6 and ready (Level 7 to With Level 9. By using teknometer is expected to provide basic information about mapping the potential needs and the use of appropriate technology (TTG both tools, processes and production results in Ponorogo regency. SMEs in Ponorogo Regency are dominated in the field of food, handicraft and textile fields. The SME food business unit still requires major government intervention on production process issues. The majority of SMEs business unit in the field of food still use technology (tools simple and potluck. The production process of SMEs business still neglects the hygienic side of both the production and production. The results of the evaluation and measurement of SME TK2T in Ponorogo District indicate that all samples have passed measurements at level 1 to level 3. Less than 50% pass the middle level ie level 4 to level 6, while less than 10% have passed the top level measurement , Which is level 7 to level 9. This explains that the production of SMEs in Ponorogo Regency still need government intervention both in the use of appropriate technology, as well as supporting indicators such as management, hygiene in production, human resources.

  5. Industry's efforts toward technology development related to aging management of PWR plants

    International Nuclear Information System (INIS)

    Tanaka, Hideo

    2010-01-01

    The term, 'aging plants', which refers to nuclear power plants operating more than 30 years, has become popular among local residents around nuclear power plants as well as among the media. The term 'aging' was first used in the title of the document issued by Agency of Natural Resources and Energy in 1996, 'The Basic Concept of Aging Management'. In addressing aging degradation, it was a matter of question which measure of time (date, month or year) should be used as a unit to consider an events. Although the aging plant was defined as a plant operating more than 30 years, the mode and timing of aging degradation depend on the environment and service conditions under which a component has been operating. Previous efforts made by related parties have contributed to the prevention of potential aging events which may challenge the reactor safety. Owing to such efforts, causes of some events attributable to defective design have been clarified and preventive maintenance measures, including the replacement and mitigation, have been taken accordingly. As a result, the number of events resulting from such aging phenomena has been reduced. On other other hand, the events caused by aging phenomena attributable to manufacturing processes (welding, surface treatment, etc.), which hardly emerge, are slightly increasing. There have been many cases that a shorter weld line due to lack of penetration in the narrow gap has been led to fatigue cracking. More recently, incidents of stress corrosion cracking due to work hardening and local tensile stresses on the surface have been observed. It should be noted that an effort to analyze not only the phenomena but also the mechanisms of the above events to clarify the root causes can improve the quality of preventive maintenance by means of rolling-out the analytical results to relevant plants. This paper introduces valuable experiences with the application of the results of technology development regarding to aging degradation of

  6. Effort Flow Analysis: A Methodology for Directed Product Evolution Using Rigid Body and Compliant Mechanisms

    National Research Council Canada - National Science Library

    Greer, James

    2002-01-01

    This dissertation presents a systematic design methodology for directed product evolution that uses both rigid body and compliant mechanisms to facilitate component combination in the domain of mechanical products...

  7. Formulation Efforts for Direct Vitrification of INEEL Blend Calcine Waste Simulate: Fiscal Year 2000

    Energy Technology Data Exchange (ETDEWEB)

    Crum, Jarrod V.; Vienna, John D.; Peeler, David K.; Reamer, I. A.

    2001-03-30

    This report documents the results of glass formulation efforts for Idaho National Engineering and Environmental Laboratory (INEEL) high level waste (HWL) calcine. Two waste compositions were used during testing. Testing started by using the Run 78 calcine composition and switched to simulated Blend calcine composition when it became available. The goal of the glass formulation efforts was to develop a frit composition that will accept higher waste loading that satisfies the glass processing and product acceptance constraints. 1. Melting temperature of 1125 ? 25?C 2. Viscosity between 2 and 10 Pa?s at the melting temperature 3. Liquidus temperature at least 100?C below the melting temperature 4. Normalized release of B, Li and Na each below 1 g/m2 (per ASTM C 1285-97) Glass formulation efforts tested several frit compositions with variable waste loadings of Run 78 calcine waste simulant. Frit 107 was selected as the primary candidate for processing since it met all process and performance criteria up to 45 mass% waste loading. When the simulated Blend calcine waste composition became available Frits 107 and 108 compositions were retested and again Frit 107 remained the primary candidate. However, both frits suffered a decrease in waste loading when switching from the Run 78 calcine to simulated Blend calcine waste composition. This was due to increase concentrations of both F and Al2O3 along with a decrease in CaO and Na2O in the simulate Blend calcine waste all of which have strong impacts on the glass properties that limit waste loading of this type of waste.

  8. Use of probabilistic methods for estimating failure probabilities and directing ISI-efforts

    Energy Technology Data Exchange (ETDEWEB)

    Nilsson, F; Brickstad, B [University of Uppsala, (Switzerland)

    1988-12-31

    Some general aspects of the role of Non Destructive Testing (NDT) efforts on the resulting probability of core damage is discussed. A simple model for the estimation of the pipe break probability due to IGSCC is discussed. It is partly based on analytical procedures, partly on service experience from the Swedish BWR program. Estimates of the break probabilities indicate that further studies are urgently needed. It is found that the uncertainties about the initial crack configuration are large contributors to the total uncertainty. Some effects of the inservice inspection are studied and it is found that the detection probabilities influence the failure probabilities. (authors).

  9. Emerging Education Technologies and Research Directions

    Science.gov (United States)

    Spector, J. Michael

    2013-01-01

    Two recent publications report the emerging technologies that are likely to have a significant impact on learning and instruction: (a) New Media Consortium's "2011 Horizon Report" (Johnson, Smith, Willis, Levine & Haywood, 2011), and (b) "A Roadmap for Education Technology" funded by the National Science Foundation in…

  10. Direct metal laser sintering: a digitised metal casting technology.

    Science.gov (United States)

    Venkatesh, K Vijay; Nandini, V Vidyashree

    2013-12-01

    Dental technology is undergoing advancements at a fast pace and technology is being imported from various other fields. One such imported technology is direct metal laser sintering technology for casting metal crowns. This article will discuss the process of laser sintering for making metal crowns and fixed partial dentures with a understanding of their pros and cons.

  11. Direct Metal Laser Sintering: A Digitised Metal Casting Technology

    OpenAIRE

    Venkatesh, K. Vijay; Nandini, V. Vidyashree

    2013-01-01

    Dental technology is undergoing advancements at a fast pace and technology is being imported from various other fields. One such imported technology is direct metal laser sintering technology for casting metal crowns. This article will discuss the process of laser sintering for making metal crowns and fixed partial dentures with a understanding of their pros and cons.

  12. The Effects of Hearing Aid Directional Microphone and Noise Reduction Processing on Listening Effort in Older Adults with Hearing Loss.

    Science.gov (United States)

    Desjardins, Jamie L

    2016-01-01

    Older listeners with hearing loss may exert more cognitive resources to maintain a level of listening performance similar to that of younger listeners with normal hearing. Unfortunately, this increase in cognitive load, which is often conceptualized as increased listening effort, may come at the cost of cognitive processing resources that might otherwise be available for other tasks. The purpose of this study was to evaluate the independent and combined effects of a hearing aid directional microphone and a noise reduction (NR) algorithm on reducing the listening effort older listeners with hearing loss expend on a speech-in-noise task. Participants were fitted with study worn commercially available behind-the-ear hearing aids. Listening effort on a sentence recognition in noise task was measured using an objective auditory-visual dual-task paradigm. The primary task required participants to repeat sentences presented in quiet and in a four-talker babble. The secondary task was a digital visual pursuit rotor-tracking test, for which participants were instructed to use a computer mouse to track a moving target around an ellipse that was displayed on a computer screen. Each of the two tasks was presented separately and concurrently at a fixed overall speech recognition performance level of 50% correct with and without the directional microphone and/or the NR algorithm activated in the hearing aids. In addition, participants reported how effortful it was to listen to the sentences in quiet and in background noise in the different hearing aid listening conditions. Fifteen older listeners with mild sloping to severe sensorineural hearing loss participated in this study. Listening effort in background noise was significantly reduced with the directional microphones activated in the hearing aids. However, there was no significant change in listening effort with the hearing aid NR algorithm compared to no noise processing. Correlation analysis between objective and self

  13. Readout technologies for directional WIMP Dark Matter detection

    International Nuclear Information System (INIS)

    Battat, J.B.R.; Irastorza, I.G.; Aleksandrov, A.; Asada, T.; Baracchini, E.; Billard, J.; Bosson, G.; Bourrion, O.; Bouvier, J.; Buonaura, A.; Burdge, K.; Cebrián, S.

    2016-01-01

    The measurement of the direction of WIMP-induced nuclear recoils is a compelling but technologically challenging strategy to provide an unambiguous signature of the detection of Galactic dark matter. Most directional detectors aim to reconstruct the dark-matter-induced nuclear recoil tracks, either in gas or solid targets. The main challenge with directional detection is the need for high spatial resolution over large volumes, which puts strong requirements on the readout technologies. In this paper we review the various detector readout technologies used by directional detectors. In particular, we summarize the challenges, advantages and drawbacks of each approach, and discuss future prospects for these technologies.

  14. Current and potential technologies for the detection of radionuclide signatures of proliferation (R and D efforts)

    International Nuclear Information System (INIS)

    Perkins, R.W.; Wogman, N.A.

    1993-03-01

    A country with the goal of developing nuclear weapons could pursue their ambition in several ways. These could range from the purchase or theft of a weapon or of the principal weapons components to a basic development program which may independently produce all the materials and components which are necessary. If the latter approach were pursued, there would be many signatures of such an effort and the more definitive of these include the actual materials which would be produced in each phase of the fuel cycle/weapons production process. By identifying the more definitive signatures and employing appropriate environmental sampling and analysis techniques for their observation, including imaging procedures, it should be possible to detect nuclear proliferation processes. Possible proliferation processes include: uranium acquisition through fuel fabrication; uranium enrichment for weapons production; reactor operation for plutonium production; fuel reprocessing for plutonium extraction; weapons fabrication; and uranium 233 production. Each of these are briefly discussed. The technologies for the detection of proliferation signatures which are in concept or research and development phase are: whole air beta counter; radiokrypton/xenon separator/analyzer; I-129 detector; isotope analyzer; deuterium/tritium analysis by IR/Raman spectroscopy and scintillation counting; noble gas daughter analysis; and airborne radionuclide collector/analyzer

  15. Center for Direct Reading and Sensor Technologies

    Data.gov (United States)

    Federal Laboratory Consortium — Direct-reading methods and sensors are being used more frequently in many different settings ranging from personal monitoring of individual health to applications in...

  16. Technology Transfer, Foreign Direct Investment and Economic ...

    African Journals Online (AJOL)

    The aim of this study is to investigate the long-run equilibrium relationship between various international factors and economic growth, as well as to assess the short-term impact of inward FDI, trade and economic growth on international technology transfer to Nigeria. To achieve this, the study used a time series data from ...

  17. Noradrenaline and dopamine neurons in the reward/effort trade-off: a direct electrophysiological comparison in behaving monkeys.

    Science.gov (United States)

    Varazzani, Chiara; San-Galli, Aurore; Gilardeau, Sophie; Bouret, Sebastien

    2015-05-20

    Motivation determines multiple aspects of behavior, including action selection and energization of behavior. Several components of the underlying neural systems have been examined closely, but the specific role of the different neuromodulatory systems in motivation remains unclear. Here, we compare directly the activity of dopaminergic neurons from the substantia nigra pars compacta and noradrenergic neurons from the locus coeruleus in monkeys performing a task manipulating the reward/effort trade-off. Consistent with previous reports, dopaminergic neurons encoded the expected reward, but we found that they also anticipated the upcoming effort cost in connection with its negative influence on action selection. Conversely, the firing of noradrenergic neurons increased with both pupil dilation and effort production in relation to the energization of behavior. Therefore, this work underlines the contribution of dopamine to effort-based decision making and uncovers a specific role of noradrenaline in energizing behavior to face challenges. Copyright © 2015 the authors 0270-6474/15/357866-12$15.00/0.

  18. Technology Transfer, Foreign Direct Investment and International Trade

    OpenAIRE

    Leonard K. Cheng

    2000-01-01

    By developing a Ricardian trade model that features technology transfer via foreign direct investment (FDI), we show that technology transfer via multinational enterprises (MNEs) increases world output and trade in goods and services. When there are many goods a continuous reduction in the cost of technology transfer will cause increasingly more technologically advanced goods to go through the product cycle, i.e., goods initially produced in the advanced North are later produced in the backwa...

  19. Direct block scheduling technology: Analysis of Avidity

    Directory of Open Access Journals (Sweden)

    Felipe Ribeiro Souza

    Full Text Available Abstract This study is focused on Direct Block Scheduling testing (Direct Multi-Period Scheduling methodology which schedules mine production considering the correct discount factor of each mining block, resulting in the final pit. Each block is analyzed individually in order to define the best target period. This methodology presents an improvement of the classical methodology derived from Lerchs-Grossmann's initial proposition improved by Whittle. This paper presents the differences between these methodologies, specially focused on the algorithms' avidity. Avidity is classically defined by the voracious search algorithms, whereupon some of the most famous greedy algorithms are Branch and Bound, Brutal Force and Randomized. Strategies based on heuristics can accentuate the voracity of the optimizer system. The applied algorithm use simulated annealing combined with Tabu Search. The most avid algorithm can select the most profitable blocks in early periods, leading to higher present value in the first periods of mine operation. The application of discount factors to blocks on the Lerchs-Grossmann's final pit has an accentuated effect with time, and this effect may make blocks scheduled for the end of the mine life unfeasible, representing a trend to a decrease in reported reserves.

  20. Results of the German alternative fuel cycle evaluation and further efforts geared toward demonstration of direct disposal

    International Nuclear Information System (INIS)

    Papp, R.; Closs, K.D.

    1986-01-01

    In a comparative study initiated by the German Federal Ministry for Research and Technology which was carried out by Karlsruhe Nuclear Research Center in the period from 1981 to 1985, direct disposal of spent fuel was contrasted to the traditional fuel cycle with reprocessing and recycle. The results of the study did not exhibit decisive advantages of direct disposal over fuel reprocessing. Due to this face and legal requirements of the German Atomic Energy Act, the cabinet concluded to continue to adhere to fuel reprocessing as the preferred version of ''Entsorgung''. But the door was left ajar for the direct disposal alternative that, under present atomic law, is permissible for fuel for which reprocessing is neither technically feasible nor economically justified. An ambitious program has been launched in the Federal Republic of Germany (FRG), geared to bring direct disposal to a point of technical maturity

  1. Technology and Sexuality--What's the Connection? Addressing Youth Sexualities in Efforts to Increase Girls' Participation in Computing

    Science.gov (United States)

    Ashcraft, Catherine

    2015-01-01

    To date, girls and women are significantly underrepresented in computer science and technology. Concerns about this underrepresentation have sparked a wealth of educational efforts to promote girls' participation in computing, but these programs have demonstrated limited impact on reversing current trends. This paper argues that this is, in part,…

  2. Directed Vapor Deposition: Low Vacuum Materials Processing Technology

    National Research Council Canada - National Science Library

    Groves, J. F; Mattausch, G; Morgner, H; Hass, D. D; Wadley, H. N

    2000-01-01

    Directed vapor deposition (DVD) is a recently developed electron beam-based evaporation technology designed to enhance the creation of high performance thick and thin film coatings on small area surfaces...

  3. Technology-based suicide prevention: current applications and future directions.

    Science.gov (United States)

    Luxton, David D; June, Jennifer D; Kinn, Julie T

    2011-01-01

    This review reports on current and emerging technologies for suicide prevention. Technology-based programs discussed include interactive educational and social networking Web sites, e-mail outreach, and programs that use mobile devices and texting. We describe innovative applications such as virtual worlds, gaming, and text analysis that are currently being developed and applied to suicide prevention and outreach programs. We also discuss the benefits and limitations of technology-based applications and discuss future directions for their use.

  4. Bridging the Gap: Self-Directed Staff Technology Training

    Directory of Open Access Journals (Sweden)

    Kayla L. Quinney

    2010-12-01

    Full Text Available Undergraduates, as members of the Millennial Generation, are proficient in Web 2.0 technology and expect to apply these technologies to their coursework—including scholarly research. To remain relevant, academic libraries need to provide the technology that student patrons expect, and academic librarians need to learn and use these technologies themselves. Because leaders at the Harold B. Lee Library of Brigham Young University (HBLL perceived a gap in technology use between students and their staff and faculty, they developed and implemented the Technology Challenge, a self-directed technology training program that rewarded employees for exploring technology daily. The purpose of this paper is to examine the Technology Challenge through an analysis of results of surveys given to participants before and after the Technology Challenge was implemented. The program will also be evaluated in terms of the adult learning theories of andragogy and selfdirected learning. HBLL found that a self-directed approach fosters technology skills that librarians need to best serve students. In addition, it promotes lifelong learning habits to keep abreast of emerging technologies. This paper offers some insights and methods that could be applied in other libraries, the most valuable of which is the use of self-directed and andragogical training methods to help academic libraries better integrate modern technologies.

  5. 77 FR 46855 - Small Business Technology Transfer Program Policy Directive

    Science.gov (United States)

    2012-08-06

    ... SMALL BUSINESS ADMINISTRATION 13 CFR Chapter I RIN 3245-AF45 Small Business Technology Transfer Program Policy Directive AGENCY: Small Business Administration. ACTION: Final policy directive with request for comments. SUMMARY: The U.S. Small Business Administration (SBA) is amending its Small Business...

  6. ARMS CONTROL: U.S. Efforts to Control the Transfer of Nuclear-Capable Missile Technology

    National Research Council Canada - National Science Library

    Plunkett, R

    1990-01-01

    ...). Through the MTCR, the United States and seven of its allies are attempting to limit the availability of certain systems, equipment, and technologies necessary for developing nuclear-capable missiles...

  7. Coherent efforts in relation to COPD patients with special emphasis on the quality and technological solutions

    DEFF Research Database (Denmark)

    Bagger, Bettan; Vestergaard*, Kitt; Andresen, Mette

    Keywords: COPD, quality, clinical pathways, daily life, competences, welfare technology Background: Focus in Health Service moves towards quality and hence focus is on results that create quality in healthcare services. Technologies are assumed to promote more consistent quality in health care......, Hospital Naestved investigate COPD patients’ and health professionals’ perspectives with respect to their assessments of quality in clinical pathways and daily life focusing on clinical pathways, interdisciplinary sharing of knowledge and use of technology. Identification of parameters will be important...... recruits informants. Methodology: qualitative in depth interviews A literature review has been done to identify COPD patients and health professionals’ assessment of parameters for quality in clinical pathways and daily life. The study is a phenomenological explorative study focusing upon the meaning...

  8. Poster COHERENT EFFORT FOR COPD PATIENTS  WITH A SPECIAL FOCUS ON WELFARE TECHNOLOGY

    DEFF Research Database (Denmark)

    Vestergaard*, Kitt; Bagger, Bettan; Bech, Lone

    and consistency of treatment programs for patients with COPD this project seeks to explore: Experiences among patients with COPD and health professionals of implementation of technology regarding own competences for using the technologies as well as its impact on the quality of care. Method: The study...... the brochures as especially good, one expressed "The brochures are really good, that's for sure. I use it in my work with our patients, "and" it was a very good knowledge boost “. They were as well very satisfied about the telephone consultation, "Telephone consultation with a single patient case, which...... was a bit difficult (...)I got really good help." The healthcare professionals who had used www.helbredsprofilen.dk found it very informative and useful, both for them selves as professionals, but also for the patients with COPD. They found that it provide something, that the other technologies don´t, “It...

  9. COHERENT EFFORT FOR COPD PATIENTS  WITH A SPECIAL FOCUS ON WELFARE TECHNOLOGY

    DEFF Research Database (Denmark)

    Vestergaard*, Kitt; Bagger, Bettan; Jensen, Lars Heegaard

    and consistency of treatment programs for patients with COPD this project seeks to explore: Experiences among patients with COPD and health professionals of implementation of technology regarding own competences for using the technologies as well as its impact on the quality of care. Method: The study...... the brochures as especially good, one expressed "The brochures are really good, that's for sure. I use it in my work with our patients, "and" it was a very good knowledge boost “. They were as well very satisfied about the telephone consultation, "Telephone consultation with a single patient case, which...... was a bit difficult (...)I got really good help." The healthcare professionals who had used www.helbredsprofilen.dk found it very informative and useful, both for them selves as professionals, but also for the patients with COPD. They found that it provide something, that the other technologies don´t, “It...

  10. Struggling for a New Identity: A Critique of the Curriculum Research Effort in Technology Education.

    Science.gov (United States)

    Zuga, Karen F.

    Historically, technology education evolved from several strands: Bacon's realism, Pestalozzi's belief in the practical application of knowledge, Rousseau's naturalism, Herbart's sense realism, Dewey's progressive and social reconstructionist thinking, and the influence of vocationalism. The mainstream practice of industrial arts was more a study…

  11. Summary of Liquid Oxygen/Hydrogen, Direct Metal Laser Sintering Injector Testing and Evaluation Effort at Marshall Space Flight Center

    Science.gov (United States)

    Barnett, Gregory; Bullard, David B.

    2015-01-01

    The last several years have witnessed a significant advancement in the area of additive manufacturing technology. One area that has seen substantial expansion in application has been laser sintering (or melting) in a powder bed. This technology is often termed 3D printing or various acronyms that may be industry, process, or company specific. Components manufactured via 3D printing have the potential to significantly reduce development and fabrication time and cost. The usefulness of 3D printed components is influenced by several factors such as material properties and surface roughness. This paper details three injectors that were designed, fabricated, and tested in order to evaluate the utility of 3D printed components for rocket engine applications. The three injectors were tested in a hot-fire environment with chamber pressures of approximately 1400 psia. One injector was a 28 element design printed by Directed Manufacturing. The other two injectors were identical 40 element designs printed by Directed Manufacturing and Solid Concepts. All the injectors were swirl-coaxial designs and were subscale versions of a full-scale injector currently in fabrication. The test and evaluation programs for the 28 element and 40 element injectors provided a substantial amount of data that confirms the feasibility of 3D printed parts for future applications. The operating conditions of previously tested, conventionally manufactured injectors were reproduced in the 28 and 40 element programs in order to contrast the performance of each. Overall, the 3D printed injectors demonstrated comparable performance to the conventionally manufactured units. The design features of the aforementioned injectors can readily be implemented in future applications with a high degree of confidence.

  12. PRODUCTION OF PROTOTYPE PARTS USING DIRECT METAL LASER SINTERING TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Josef Sedlak

    2015-08-01

    Full Text Available Unconventional methods of modern materials preparation include additive technologies which involve the sintering of powders of different chemical composition, granularity, physical, chemical and other utility properties. The technology called Rapid Prototyping, which uses different technological principles of producing components, belongs to this type of material preparation. The Rapid Prototyping technology facilities use photopolymers, thermoplastics, specially treated paper or metal powders. The advantage is the direct production of metal parts from input data and the fact that there is no need for the production of special tools (moulds, press tools, etc.. Unused powder from sintering technologies is re-used for production 98% of the time, which means that the process is economical, as well as ecological.The present paper discusses the technology of Direct Metal Laser Sintering (DMLS, which falls into the group of additive technologies of Rapid Prototyping (RP. The major objective is a detailed description of DMLS, pointing out the benefits it offers and its application in practice. The practical part describes the production and provides an economic comparison of several prototype parts that were designed for testing in the automotive industry.

  13. Workshop on nuclear technology: A joint effort between ANS and the University of Massachusetts-Lowell

    International Nuclear Information System (INIS)

    Brown, G.J.; McDevitt, M.A.; Schmidt, D.

    1992-01-01

    The University of Massachusetts Lowell (UML) (formerly University of Lowell) sponsored, along with the American Nuclear Society (ANS), a 5-day workshop entitled 'Understanding and Teaching about Nuclear Technology and Its Place in Our Society.' More than 30 middle and high school teachers from the New England area (Connecticut, New Hampshire, and Massachusetts) attended the workshop, which was held June 24 through 28, 1991. Based on this experience, and with the expectation of replicating if not improving upon initial success, plans are now under way to offer a similar workshop at UML from June 29 through July 3, 1992

  14. An Overview of Communications Technology and Development Efforts for 2015 SBIR Phase I

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.

    2017-01-01

    This report highlights innovative SBIR 2015 Phase I projects specifically addressing areas in Communications Technology and Development which is one of six core competencies at NASA Glenn Research Center. There are fifteen technologies featured with emphasis on a wide spectrum of applications such as novel solid state lasers for space-based water vapor dial; wide temperature, high voltage and energy density capacitors for aerospace exploration; instrument for airborne measurement of carbonyl sulfide; high-power tunable seed laser for methane Lidar transmitter; ROC-rib deployable ka-band antenna for nanosatellites; a SIC-based microcontroller for high-temperature in-situ instruments and systems; improved yield, performance and reliability of high-actuator-count deformable mirrors; embedded multifunctional optical sensor system; switching electronics for space-based telescopes with advanced AO systems; integrated miniature DBR laser module for Lidar instruments; and much more. Each article in this booklet describes an innovation, technical objective, and highlights NASA commercial and industrial applications. space-based water vapor dial; wide temperature, high voltage and energy density capacitors foraerospace exploration; instrument for airborne measurement of carbonyl sulfide; high-power tunable seed laser formethane Lidar transmitter; ROC-rib deployable ka-band antenna for nanosatellites.

  15. An Effort to Improve Uranium Foil Target Fabrication Technology by Single Roll Method

    Energy Technology Data Exchange (ETDEWEB)

    Sim, Moon Soo; Lee, Jong Hyeon [Chungnam National University, Daejeon (Korea, Republic of); Kim, Chang Kyu [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2012-05-15

    Technetium-99({sup 99m}Tc) is the most commonly used radioisotope in nuclear medicine for diagnostic procedures. It is produced from the decay of its parent Mo-99, which is sent to the hospital or clinic in the form of a generator. Recently, all of the major providers of Mo-99 have used high-enrichment uranium (HEU) as a target material in a research and test reactor. As a part of a nonproliferation effort, the RERTR program has investigated the production of the fission isotope Mo-99 using low-enrichment uranium(LEU) instead of HEU since 1993, a parent nuclide of {sup 99m}Tc , which is a major isotope for a medical diagnosis. As uranium foils have been produced by the conventional method on a laboratory scale by a repetitive hot-rolling method with significant problems in foil quality, productivity and economic efficiency, attention has shifted to the planar flow casting(PFC) method. In KAERI, many experiments are performed using depleted uranium(DU).

  16. Commentary on ``Future directions: Building technologies and design tools``

    Energy Technology Data Exchange (ETDEWEB)

    Quadrel, R.W.

    1992-08-10

    This paper presents a number of interesting and thought-provoking scenarios about the future use of advanced technology in the design and operation of commercial buildings. I will express my reactions in the following series of short paragraphs. These thoughts will, I hope, raise some new questions and offer fruitful directions for further exploration.

  17. An Effort to Improve U Foil Fabrication Technology of Roll-casting for Fission Mo Target

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Chang Kyu; Woo, Yun Myeong; Kim, Ki Hwan; Oh, Jong Myeong [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Sim, Moon Soo [Chungnam University, Green Energy Technology, Daejeon (Korea, Republic of)

    2010-10-15

    Mo-99 isotope has been produced mainly by extracting fission products of {sup 235}U. The targets for irradiating in reactor have used as stainless tube coated with highly enriched UO{sub 2} at the inside surface and highly enriched UAlx plate cladded with aluminum. In connection with non-proliferation policy the RERTR program developed a new process of Mo-99 using low enriched uranium (LEU) instead of highly enriched uranium (HEU). LEU should be put about five times more quantity than HEU because the {sup 235}U contents of LEU and HEU are 20% and higher than 90%, respectively. Accordingly pure uranium metal foil target was adopted as a promising target material due to high uranium density. ANL and BATAN developed a Cintichem process using uranium metal foil target of 130 {mu}m in thickness jointly and the RERTR program is trying to disseminate the new process world-widely. However, uranium foil is made by lots of times rolling work on uranium plate, which is laborious and tedious. In order to avoid this difficulty KAERI developed a new process of making foil directly from uranium melt by roll casting. This process is very much simple, productive, and cost-effective. But the outside surface of foil is generally very rough. A typical transverse cross section had a minimum thickness of 65 {mu}m and a maximum thickness of 205 {mu}m. This roughness could affect (1) target fabrication, where the U foil, or the Ni foil might be damaged during drawing, and (2) irradiation behavior, where gaps between the target walls and the U metal might affect cooling of the target

  18. Direct and Indirect Effects of IQ, Parental Help, Effort, and Mathematics Self-Concept on Mathematics Achievement

    Directory of Open Access Journals (Sweden)

    Maher Abu-Hilal

    2012-11-01

    Full Text Available This study examined the structural relationships among cognitive constructs (intelligence and achievement and affective constructs (perceived parental help, effort and self-concept. It was proposed that the relationships are not invariant across gender. The sample consisted of 219 boys and 133 girls from elementary and preparatory public schools in Al Ain in the United Arab Emirates. Intelligence (IQ was measured by the Test of Non-verbal Intelligence (TONI and parental help was measured by 4-Likert-type items. Effort was measured by 4-Likert-type items. Self-concept (SC was measured by 8-Likert-type items taken from the SDQ I (Abu-Hilal, 2000. Mathematic Achievement was the scores of students in mathematics from school records. The structural model assumed that IQ would have an effect on parental help, effort, SC and achievement. Parental help would have an effect on effort, SC and achievement. Also, effort would have an effect on SC and achievement. Finally, SC would have an effect on achievement. The structural model was tested for invariance across gender. The measurement model proved to be invariant across gender and so was the structural model. The non-constrained model indicated that the structural relationships among the variables do vary according to gender. For example, boys benefited from parental help by exerting more effort while girls did not. Boys with high IQ exerted more effort than boys with low IQ; but girls with high IQ exerted the same amount of effort as girls with low IQ. The model explained 45% and 39% of the variance in math scores for boys and girls, respectively.

  19. Does Foreign Direct Investment Transfer Technology Across Borders? A Reexamination

    OpenAIRE

    Jürgen Bitzer; Monika Kerekes

    2005-01-01

    Reexamining foreign direct investment (FDI) as a potential channel for knowledge diffusion -- based on industry data from seventeen OECD countries during the period 1973-2000 -- we find that FDI-receiving countries benefit strongly from FDI-related knowledge spillovers. We do not find evidence for positive FDI-related technology sourcing effects. Instead, our results suggest that outward FDI might have negative effects on the output of the FDI-sending country.

  20. Recent Efforts in Communications Research and Technology at the Glenn Research Center in Support of NASA's Mission

    Science.gov (United States)

    Miranda, Felix A.

    2015-01-01

    As it has done in the past, NASA is currently engaged in furthering the frontiers of space and planetary exploration. The effectiveness in gathering the desired science data in the amount and quality required to perform this pioneering work relies heavily on the communications capabilities of the spacecraft and space platforms being considered to enable future missions. Accordingly, the continuous improvement and development of radiofrequency and optical communications systems are fundamental to prevent communications to become the limiting factor for space explorations. This presentation will discuss some of the research and technology development efforts currently underway at the NASA Glenn Research Center in the radio frequency (RF) and Optical Communications. Examples of work conducted in-house and also in collaboration with academia, industry, and other government agencies (OGA) in areas such as antenna technology, power amplifiers, radio frequency (RF) wave propagation through Earths atmosphere, ultra-sensitive receivers, thin films ferroelectric-based tunable components, among others, will be presented. In addition, the role of these and other related RF technologies in enabling the NASA next generation space communications architecture will be also discussed.

  1. Understanding consumer preferences for communication channels to create consumer-directed health promotion efforts in psychiatric rehabilitation settings.

    Science.gov (United States)

    DiFranco, Evelina; Bressi, Sara K; Salzer, Mark S

    2006-01-01

    People with serious mental illnesses experience increased rates of physical illnesses. Drop-in centers and psychosocial rehabilitation programs can serve as important settings for health promotion efforts, but such efforts should utilize communication strategies that are used by consumers and are perceived to be reliable. Focus groups involving 23 consumers at drop-in centers in Philadelphia were conducted to assess the perceived usefulness of health information from a variety of sources. Consumers especially liked getting information from other people, including health care professionals, friends, and family, and found the information to be reliable and useful. Print literature, the Internet, and a library had various limitations. Respondents were generally unfamiliar with community health fairs and related events. Consumers considered trustworthiness, proximity and availability, and the specificity and depth of information provided by a communication source when getting health information. Implications for health promotion efforts are discussed.

  2. State of technology of direct contact heat exchanging

    Energy Technology Data Exchange (ETDEWEB)

    Vallario, R.W.; DeBellis, D.E.

    1984-05-01

    Specific objectives of this study were to assess the state of technology development and to identify and evaluate the constraints to wider use of direct contact heat exchanger (DCHE) technology in the U.S. The scope of this study is relatively broad; it includes many types of generic systems and end-use applications, both current and future. Domestic and foreign experience with DCHE technology are compared, although the primary focus is on domestic experience. Twenty-two distinct applications of DCHE technology were identified in this study and are examined in this report. The general format is to describe each system, explore its potential applications, discuss current and past research activities and identify major implementation barriers. Finally, as a result of discussions with principal users of DCHE systems and with other knowledgeable sources, generic and specific R and D needs to overcome specific implementation barriers have been identified. The following list of DCHE systems/concepts has been classified into four major end-uses; there is also a category for specialized (other) applications.

  3. Attending to others: how digital technologies direct young people's nightlife

    Directory of Open Access Journals (Sweden)

    J. Truong

    2018-05-01

    Full Text Available It is a growing phenomenon that young people use mobile information and communication technologies during their nightlife. This article offers an empirical examination of how young people's nightlife is shaped by engagement with the mobile phone application WhatsApp. Drawing on Sara Ahmed's phenomenological concept of orientation, I examine how WhatsApp extends young people's nightlife and how young people become orientated therein. On the one hand, I show that nightlife acquires new boundaries and fixities that encourage young people to direct their attention towards missing social relations and absent nightlife places. On the other hand, I find that young people create new perceptions of how to inhabit and spend leisure time and space. I argue that digital technologies reorientate young people, which I suggest offers novel means of addressing young people's contemporary nightlife practices, places, spaces, and social relations.

  4. The Perceived Role of Direct Support Professionals in the Health Promotion Efforts of Adults with Developmental Disabilities Receiving Support Services

    Science.gov (United States)

    Leser, Kendall A.; Pirie, Phyllis L.; Ferketich, Amy K.; Havercamp, Susan M.; Wewers, Mary Ellen

    2018-01-01

    Direct support professionals (DSPs) play a large social role in the lives of people with developmental disabilities (DD) and have the potential to influence their health behaviors. Six qualitative focus groups (n = 48) were conducted with DD community agency administrators, DSPs, family members and adults with DD to better understand the perceived…

  5. Technological advances in site-directed spin labeling of proteins.

    Science.gov (United States)

    Hubbell, Wayne L; López, Carlos J; Altenbach, Christian; Yang, Zhongyu

    2013-10-01

    Molecular flexibility over a wide time range is of central importance to the function of many proteins, both soluble and membrane. Revealing the modes of flexibility, their amplitudes, and time scales under physiological conditions is the challenge for spectroscopic methods, one of which is site-directed spin labeling EPR (SDSL-EPR). Here we provide an overview of some recent technological advances in SDSL-EPR related to investigation of structure, structural heterogeneity, and dynamics of proteins. These include new classes of spin labels, advances in measurement of long range distances and distance distributions, methods for identifying backbone and conformational fluctuations, and new strategies for determining the kinetics of protein motion. Copyright © 2013 Elsevier Ltd. All rights reserved.

  6. Direct-to-Consumer Marketing: A Complementary Approach to Traditional Dissemination and implementation Efforts for Mental Health and Substance Abuse Interventions.

    Science.gov (United States)

    Becker, Sara J

    2015-03-01

    The overall chasm between those who need treatment for mental health and substance abuse (M/SU) and those who receive effective treatment consists of two, interrelated gaps: the research-to-practice gap and the treatment gap. Prior efforts to disseminate evidence-based practice (EBP) for M/SU have predominantly targeted the research-to-practice gap, by focusing efforts toward treatment providers. This article introduces direct-to-consumer (DTC) marketing that targets patients and caregivers as a complementary approach to existing dissemination efforts. Specific issues discussed include: rationale for DTC marketing based on the concept of push versus pull marketing; overview of key stakeholders involved in DTC marketing; and description of the Marketing Mix planning framework. The applicability of these issues to the dissemination of EBP for M/SU is discussed.

  7. Direct-to-Consumer Marketing: A Complementary Approach to Traditional Dissemination and implementation Efforts for Mental Health and Substance Abuse Interventions

    Science.gov (United States)

    Becker, Sara J.

    2014-01-01

    The overall chasm between those who need treatment for mental health and substance abuse (M/SU) and those who receive effective treatment consists of two, interrelated gaps: the research-to-practice gap and the treatment gap. Prior efforts to disseminate evidence-based practice (EBP) for M/SU have predominantly targeted the research-to-practice gap, by focusing efforts toward treatment providers. This article introduces direct-to-consumer (DTC) marketing that targets patients and caregivers as a complementary approach to existing dissemination efforts. Specific issues discussed include: rationale for DTC marketing based on the concept of push versus pull marketing; overview of key stakeholders involved in DTC marketing; and description of the Marketing Mix planning framework. The applicability of these issues to the dissemination of EBP for M/SU is discussed. PMID:25937710

  8. Drilling a better pair : new technologies in SAGD directional drilling

    Energy Technology Data Exchange (ETDEWEB)

    Zimmer, C.; Richter, D. [Statoil Canada Ltd., Calgary, AB (Canada); Person, J.; Tilley, J.; Bittar, M. [Halliburton Energy Services, Calgary, AB (Canada)

    2010-07-01

    The Leismer Demonstration Project (LDP) is the first of 8 proposed major steam assisted gravity drainage (SAGD) projects for Statoil's Kai Kos Dehseh (KKD) asset in the Athabasca oil sands deposit. The bitumen resources are expected to produce approximately 2.2 billion barrels of oil over approximately 35 years with a peak production of 220,000 bbl/day. To date, 23 well pairs have been drilled on 4 drilling pads. The precise placement of well pairs is among the most important factors in a successful SAGD drilling program. The producer well must be placed in relation to the reservoir boundaries. It must also be accurately twinned with the injector well. A strong focus on technological innovation is needed in order to deliver on these high expectations in unconsolidated formations, such as the McMurray oil sands. Lateral SAGD pairs are often drilled with conventional steerable mud motors and logging-while-drilling (LWD) resistivity measurements, but this combination imposes certain limitations in terms of wellbore quality and placement. Several industry firsts were successfully implemented at the Statoil LDP, including a combination of the newest and most cutting-edge directional, measurement, and LWD technology. The keystone of these industry firsts was the use of a soft formation modified, point-the-bit rotary steerable system (RSS), used on 20 horizontal wells. The RRS was combined with an ultra deep azimuthal resistivity sensor to provide precise geosteering along the bottom bed boundary in the producer wells, resulting in improved reservoir capture and reservoir characterization. This paper described the new drilling system and its impact on the progressive future of directional drilling in SAGD. 8 refs., 1 tab., 22 figs.

  9. NATIONAL TECHNOLOGICAL INITIATIVE AS THE STRATEGIC DIRECTION OF THE TECHNOLOGICAL DEVELOPMENT OF RUSSIA

    Directory of Open Access Journals (Sweden)

    E. V. Sibirskaya

    2018-01-01

    Full Text Available Russia, having lost a significant part of a high-tech industrial complex during the reforms (1993–2000, sharply reducing the state support of scientific research and development, has turned into a power dependent on the conjuncture in the hydrocarbon energy market and from foreign sup-plies of technologies, consumption goods, including those necessary for life support, thus being on the "technological needle". The main factor of development was the resource-producing complex. This situation had a negative impact on the pace of the country's development, on its defense capability and created real prerequisites for the loss of technological, economic, and, in the long run, political sovereignty and disintegration of the state. Nevertheless, the availability of natural resources along with human capi-tal and geographic location is a global competitive advantage of theRussian Federation, and the task is to use this advantage maximally as one of the first echelon countries in the emerging world order. One of the most important tasks was the search for such a direction of technological devel-opment that allows, on the one hand, to preserve Russia's position in the world market of traditional products; on the other – to strengthen positions in the markets of products with a higher degree of processing of Russian raw materials (oil and gas complex and agro-industrial complex; and finally – to master new "growth points" (services, new markets, talents, technologies in the world market of high-tech products and services. The set tasks assume several solutions. First, scientific and technological development should be based on the strategy of scientific and technological development of theRussian Federationand the national technological initiative, as it sets both resource constraints and priorities in the needs of the economy in new products and new technological solutions. Secondly,Russiashould take into account existing and emerging trends in the

  10. Advances and Research Directions in Data-Warehousing Technology

    Directory of Open Access Journals (Sweden)

    Mukesh Mohania

    1999-11-01

    Full Text Available Information is one of the most valuable assets of an organisation and when used properly can assist in intelligent decision making that can significantly improve the functioning of an organisation. Data Warehousing is a recent technology that allows information to be easily and efficiently accessed for decision-making activities by collecting data from many operational, legacy and possibly heterogeneous data sources. On-Line Analytical Processing (OLAP tools are well-suited for complex data analysis, such as multi-dimensional data analysis, and to assist in decision support activities while data mining tools take the process one step further and actively search the data for patterns and hidden knowledge in the data held in the warehouse. Many organisations are building, or are planning to develop, a data warehouse for their operational and decision support needs. In this paper, we present an overview of data warehousing, multi-dimensional databases, OLAP and data mining technology and discuss the directions of current research in the area. We also discuss recent developments in data warehouse modelling, view selection and maintenance, indexing schemes, parallel query processing and data mining issues. A number of technical issues for exploratory research are presented and possible solutions are also discussed.

  11. Manufacturing technologies for direct methanol fuel cells (DMFCs)

    Energy Technology Data Exchange (ETDEWEB)

    Gluesen, Andreas; Mueller, Martin; Kimiaie, Nicola; Konradi, Irene; Mergel, Juergen; Stolten, Detlef [Forschungszentrum Juelich (Germany). Inst. of Energy Research - IEF-3: Fuel Cells

    2010-07-01

    Fuel cell research is focussing on increasing power density and lifetime and reducing costs of the whole fuel cell system. In order to reach these aims, it is necessary to develop appropriately designed components outgoing from high quality materials, a suitable manufacturing process and a well balanced system. To make use of the advantages that can be obtained by developing production technology, we are mainly improving the coating and assembling techniques for polymer electrolyte fuel cells, especially Direct Methanol Fuel Cells (DMFCs). Coating is used for making fuel cell electrodes as well as highly conductive contacts. Assembling is used to join larger components like membrane electrode assemblies (MEAs) and bipolar units consisting of flow fields and the separator plate, as well as entire stacks. On the one hand a reproducible manufacturing process is required to study fine differences in fuel cell performance affected by new materials or new designs. On the other hand a change in each parameter of the manufacturing process itself can change product properties and therefore affect fuel cell performance. As a result, gas diffusion electrodes (GDEs) are now produced automatically in square-meter batches, the hot-pressing of MEAs is a fully automated process and by pre-assembling the number of parts that have to be assembled in a stack was reduced by a factor of 10. These achievements make DMFC manufacturing more reproducible and less error-prone. All these and further developments of manufacturing technology are necessary to make DMFCs ready for the market. (orig.)

  12. Overview of the SMAP Applications and the SMAP Early Adopters Program - NASA's First Mission-Directed Outreach Effort

    Science.gov (United States)

    Escobar, V. M.; Delgado Arias, S.; Nearing, G.; Entekhabi, D.; Njoku, E.; Yueh, S.; Doorn, B.; Reichle, R.

    2016-01-01

    Satellite data provide global observations of many of the earths system processes and features. These data are valuable for developing scientific products that increase our understanding of how the earths systems are integrated. The water, energy and carbon cycle exchanges between the land and atmosphere are linked by soil moisture. NASAs Soil Moisture Active Passive (SMAP) mission provides soil moisture and freeze thaw measurements from space and allows scientists to link the water energy and carbon cycles. In order for SMAP data to be best integrated into decision support systems, the mission has engaged with the stakeholder community since 2009 and has attempted to scale the utility of the data to the thematic societal impacts of the satellite product applications. The SMAP Mission, which launched on January 31, 2015, has actively grown an Early Adopter (EA) community as part of its applications effort and worked with these EAs to demonstrate a scaled thematic impact of SMAP data product in societally relevant decision support applications. The SMAP mission provides global observations of the Earths surface soil moisture, providing high accuracy, resolution and continuous global coverage. Through the Early Adopters Program, the SMAP Applications Team will spend the next 2 years after launch documenting and evaluating the use of SMAP science products in applications related to weather forecasting, drought, agriculture productivity, floods, human health and national security.

  13. An Examination of Secondary School Teachers' Technology Integration Recommended by ISTE's National Educational Technology Standards for Teachers and School Principal Support for Teacher Technology Efforts

    Science.gov (United States)

    Esposito, Maria

    2013-01-01

    The National Educational Technology Standards for teachers (NETS-T) was adopted by New York State, and was critical to the development of students entering a global society. This study examines teachers' use of digital tools to promote student learning and reflection, promote digital citizenship, communicate and collaborate with parents and…

  14. New insights from direct monitoring of turbidity currents; and a proposal for co-ordinating international efforts at a series of global "turbidity current test sites"

    Science.gov (United States)

    Talling, Peter

    2015-04-01

    Turbidity currents, and other types of submarine sediment density flow, arguably redistribute more sediment across the surface of the Earth than any other flow process. It is now over 60 years since the seminal publication of Kuenen and Migliorini (1950) in which they made the link between sequences of graded bedding and turbidity currents. The deposits of submarine sediment density flows have been described in numerous locations worldwide, and this might lead to the view that these flows are well understood. However, it is sobering to note quite how few direct measurements we have from these submarine flows in action. Sediment concentration is the critical parameter controlling such flows, yet it has never been measured directly for flows that reach and build submarine fans. How then do we know what type of flow to model in flume tanks, or which assumptions to use to formulate numerical simulations or analytical models? It is proposed here that international efforts are needed for an initiative to monitor active turbidity currents at a series of 'test sites' where flows occur frequently. The flows evolve significantly, such that source to sink data are needed. We also need to directly monitor flows in different settings with variable triggering factors and flow path morphologies because their character can vary significantly. Such work should integrate numerical and physical modelling with the collection of field observations in order to understand the significance of field observations. Such an international initiative also needs to include coring of deposits to link flow processes to deposit character, because in most global locations flow behaviour must be inferred from deposits alone. Collection of seismic datasets is also crucial for understanding the larger-scale evolution and resulting architecture of these systems, and to link with studies of subsurface reservoirs. Test site datasets should thus include a wide range of data types, not just from direct flow

  15. Technology Spillover from Foreign Direct Investment in Turkey

    Directory of Open Access Journals (Sweden)

    Özcan Karahan

    2016-12-01

    quarterly data for the period of 2002 and 2015 in Turkey. Thus we try to examine whether technological diffusion generated by FDI inflows to Turkey enhances the innovative capability of the country or not. Design/methodology/approach – The variables Foreign Direct Investment (FDI and Gross Domestic Product (GDP are sourced from Electronic Data Delivery System (EDDS in Central Bank of the Republic of Turkey. FDI series consist of values called "Net Incurrence of Liabilities" in Balance of Payments Analytical Presentation while GDP series gather from the expenditure based GDP data in EDDS. Both Johansen Cointegration Test and Granger Causality Test are applied to examine between Foreign Direct Investment flows and economic growth in Turkey. Findings – Results reveal that there is not any significant link among the FDI and economic growth during the studied time period in Turkey. It seems that FDI inflows to Turkey is not complementary to economic growth, which shows that positive spillover effect sourced from FDI inflows to Turkey does not exist. Research limitations/implications – Policymakers should recognize that technology spillover effects of FDI do not occur without greater absorptive capacity. Attracting FDI is only one part of the story and thus not yield the desired benefits itself. Positive effects of FDI depends on the overall incentive and capacity structure of the host country. Then the key policy implication here is that policymakers should give same weight of policies aimed at attracting FDI versus those that seek to improve local economic conditions. Originality/value – This study insight the spillover effects of FDI based on Turkish experience that benefits from FDI do not occur automatically and effortlessly in developing countries.

  16. Audit Report "Department of Energy Efforts to Manage Information Technology Resources in an Energy-Efficient and Environmentally Responsible Manner"

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-05-01

    The American Recovery and Reinvestment Act of 2009 emphasizes energy efficiency and conservation as critical to the Nation's economic vitality; its goal of reducing dependence on foreign energy sources; and, related efforts to improve the environment. The Act highlights the significant use of various forms of energy in the Federal sector and promotes efforts to improve the energy efficiency of Federal operations. One specific area of interest is the increasing demand for Federal sector computing resources and the corresponding increase in energy use, with both cost and environmental implications. The U.S. Environmental Protection Agency reported that, without aggressive conservation measures, data center energy consumption alone is expected to double over the next five years. In our report on Management of the Department's Data Centers at Contractor Sites (DOE/IG-0803, October 2008) we concluded that the Department of Energy had not always improved the efficiency of its contractor data centers even when such modifications were possible and practical. Despite its recognized energy conservation leadership role, the Department had not always taken advantage of opportunities to reduce energy consumption associated with its information technology resources. Nor, had it ensured that resources were managed in a way that minimized impact on the environment. In particular: (1) The seven Federal and contractor sites included in our review had not fully reduced energy consumption through implementation of power management settings on their desktop and laptop computers; and, as a consequence, spent $1.6 million more on energy costs than necessary in Fiscal Year 2008; (2) None of the sites reviewed had taken advantage of opportunities to reduce energy consumption, enhance cyber security, and reduce costs available through the use of techniques, such as 'thin-client computing' in their unclassified environments; and, (3) Sites had not always taken the

  17. Teachers and Technology: Present Practice and Future Directions

    Science.gov (United States)

    DeCoito, Isha; Richardson, Tasha

    2018-01-01

    Technology cannot be effective in the classroom without teachers who are knowledgeable about both the technology itself and its implementation to meet educational goals. While technology use in the classroom is increasing, improving learning through its application should remain the goal. In this study, the authors explored 74 middle school…

  18. Science and technology of plasma activated direct wafer bonding

    Science.gov (United States)

    Roberds, Brian Edward

    This dissertation studied the kinetics of silicon direct wafer bonding with emphasis on low temperature bonding mechanisms. The project goals were to understand the topological requirements for initial bonding, develop a tensile test to measure the bond strength as a function of time and temperature and, using the kinetic information obtained, develop lower temperature methods of bonding. A reproducible surface metrology metric for bonding was best described by power spectral density derived from atomic force microscopy measurements. From the tensile strength kinetics study it was found that low annealing temperatures could be used to obtain strong bonds, but at the expense of longer annealing times. Three models were developed to describe the kinetics. A diffusion controlled model and a reaction rate controlled model were developed for the higher temperature regimes (T > 600sp°C), and an electric field assisted oxidation model was proposed for the low temperature range. An in situ oxygen plasma treatment was used to further enhance the field-controlled mechanism which resulted in dramatic increases in the low temperature bonding kinetics. Multiple internal transmission Fourier transform infrared spectroscopy (MIT-FTIR) was used to monitor species evolution at the bonded interface and a capacitance-voltage (CV) study was undertaken to investigate charge distribution and surface states resulting from plasma activation. A short, less than a minute, plasma exposure prior to contacting the wafers was found to obtain very strong bonds for hydrophobic silicon wafers at very low temperatures (100sp°C). This novel bonding method may enable new technologies involving heterogeneous material systems or bonding partially fabricated devices to become realities.

  19. Youth, Technology and HIV: Recent Advances and Future Directions

    Science.gov (United States)

    Hightow-Weidman, Lisa B.; Muessig, Kathryn E.; Bauermeister, Jose; Zhang, Chen; LeGrand, Sara

    2015-01-01

    Technology, including mobile technologies and social media, offers powerful tools to reach, engage, and retain youth and young adults in HIV prevention and care interventions both in the United States and globally. In this report we focus on HIV, technology, and youth, presenting a synthesis of recently published (Jan 2014-May 2015) observational and experimental studies relevant for understanding and intervening on HIV risk, prevention and care. We present findings from a selection of the 66 relevant citations identified, highlighting studies that demonstrate a novel approach to technology interventions among youth in regard to content, delivery, target population or public health impact. We discuss current trends globally and in the US in how youth are using technology, as well as emergent research issues in this field – including the need for new theories for developing technology-based HIV interventions and new metrics of engagement, exposure, and evaluation. PMID:26385582

  20. A Framework for Developing Self-Directed Technology Use for Language Learning

    Science.gov (United States)

    Lai, Chun

    2013-01-01

    Critical to maximizing the potential of technology for learning is enhancing language learners' self-directed use of technology for learning purposes. This study aimed to enhance our understanding of the determinants of self-directed technology use through the construction of a structural equation modelling (SEM) framework of factors and…

  1. Technology Directions for the 21st Century. Vol. 2

    Science.gov (United States)

    Crimi, Giles F.; Verheggen, Henry; Malinowski, John; Malinowski, Robert; Botta, Robert

    1996-01-01

    The Office of Space Communications (OSC) is tasked by NASA to conduct a planning process to meet NASA's science mission and other communications and data processing requirements. A set of technology trend studies was undertaken by Science Applications International Corporation (SAIC) for OSC to identify quantitative data that can be used to predict performance of electronic equipment in the future to assist in the planning process. Only commercially available, off-the-shelf technology was included. For each technology area considered, the current state of the technology is discussed, future applications that could benefit from use of the technology are identified, and likely future developments of the technology are described. The impact of each technology area on NASA operations is presented together with a discussion of the feasibility and risk associated with its development. An approximate timeline is given for the next 15 to 25 years to indicate the anticipated evolution of capabilities within each of the technology areas considered. This volume contains four chapters: one each on technology trends for database systems, computer software, neural and fuzzy systems, and artificial intelligence. The principal study results are summarized at the beginning of each chapter.

  2. Mode of foreign entry, technology transfer, and foreign direct investment policy

    OpenAIRE

    Mattoo, Aaditya; Olarreaga, Marcelo; Saggi, Kamal

    2001-01-01

    Foreign direct investment can take place through the direct entry of foreign firms or the acquisition of existing domestic firms. Mattoo, Olarreaga, and Saggi examine the preferences of a foreign firm and the host country government with respect to these two modes of foreign direct investment in the presence of costly technology transfer. The tradeoff between technology transfer and market...

  3. The Potential of Directed Instruction to Teach Effectively Technology Usage

    Science.gov (United States)

    Hosseini, Zahra

    2016-01-01

    Currently, teacher educational systems tend to develop their teachers' knowledge to effectively integrate technology in teaching. Consequently, numerous studies have attempted to describe strategies, models and approaches to develop teachers' knowledge for teaching with technology. However, most teachers are still following their traditional…

  4. CRISPR technologies for bacterial systems: Current achievements and future directions.

    Science.gov (United States)

    Choi, Kyeong Rok; Lee, Sang Yup

    2016-11-15

    Throughout the decades of its history, the advances in bacteria-based bio-industries have coincided with great leaps in strain engineering technologies. Recently unveiled clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated proteins (Cas) systems are now revolutionizing biotechnology as well as biology. Diverse technologies have been derived from CRISPR/Cas systems in bacteria, yet the applications unfortunately have not been actively employed in bacteria as extensively as in eukaryotic organisms. A recent trend of engineering less explored strains in industrial microbiology-metabolic engineering, synthetic biology, and other related disciplines-is demanding facile yet robust tools, and various CRISPR technologies have potential to cater to the demands. Here, we briefly review the science in CRISPR/Cas systems and the milestone inventions that enabled numerous CRISPR technologies. Next, we describe CRISPR/Cas-derived technologies for bacterial strain development, including genome editing and gene expression regulation applications. Then, other CRISPR technologies possessing great potential for industrial applications are described, including typing and tracking of bacterial strains, virome identification, vaccination of bacteria, and advanced antimicrobial approaches. For each application, we note our suggestions for additional improvements as well. In the same context, replication of CRISPR/Cas-based chromosome imaging technologies developed originally in eukaryotic systems is introduced with its potential impact on studying bacterial chromosomal dynamics. Also, the current patent status of CRISPR technologies is reviewed. Finally, we provide some insights to the future of CRISPR technologies for bacterial systems by proposing complementary techniques to be developed for the use of CRISPR technologies in even wider range of applications. Copyright © 2016. Published by Elsevier Inc.

  5. Students' Perceptions of Self-Directed Learning and Collaborative Learning with and without Technology

    Science.gov (United States)

    Lee, K.; Tsai, P.-S.; Chai, C. S.; Koh, J. H. L.

    2014-01-01

    This study explored students' perceptions of self-directed learning (SDL) and collaborative learning (CL) with/without technology in an information and communications technology-supported classroom environment. The factors include SDL, CL, SDL supported by technology, and CL supported by technology. Based on the literature review, this study…

  6. Information Technology in the Home Barriers, Opportunities, and Research Directions

    National Research Council Canada - National Science Library

    Lewis, Rosalind

    2000-01-01

    ...; but what are the implications of increased Information Technology (IT) in the home? Can increased in-home IT create opportunities that will change the way we live and function within our homes and communities and facilitate greater societal benefits...

  7. Ambient Persuasive Technology Needs Little Cognitive Effort: The Differential Effects of Cognitive Load on Lighting Feedback versus Factual Feedback

    Science.gov (United States)

    Ham, Jaap; Midden, Cees

    Persuasive technology can influence behavior or attitudes by for example providing interactive factual feedback about energy conservation. However, people often lack motivation or cognitive capacity to consciously process such relative complex information (e.g., numerical consumption feedback). Extending recent research that indicates that ambient persuasive technology can persuade the user without receiving the user's conscious attention, we argue here that Ambient Persuasive Technology can be effective while needing only little cognitive resources, and in general can be more influential than more focal forms of persuasive technology. In an experimental study, some participants received energy consumption feedback by means of a light changing color (more green=lower energy consumption, vs. more red=higher energy consumption) and others by means of numbers indicating kWh consumption. Results indicated that ambient feedback led to more conservation than factual feedback. Also, as expected, only for participants processing factual feedback, additional cognitive load lead to slower processing of that feedback. This research sheds light on fundamental characteristics of Ambient Persuasive Technology and Persuasive Lighting, and suggests that it can have important advantages over more focal persuasive technologies without losing its persuasive potential.

  8. Effortful echolalia.

    Science.gov (United States)

    Hadano, K; Nakamura, H; Hamanaka, T

    1998-02-01

    We report three cases of effortful echolalia in patients with cerebral infarction. The clinical picture of speech disturbance is associated with Type 1 Transcortical Motor Aphasia (TCMA, Goldstein, 1915). The patients always spoke nonfluently with loss of speech initiative, dysarthria, dysprosody, agrammatism, and increased effort and were unable to repeat sentences longer than those containing four or six words. In conversation, they first repeated a few words spoken to them, and then produced self initiated speech. The initial repetition as well as the subsequent self initiated speech, which were realized equally laboriously, can be regarded as mitigated echolalia (Pick, 1924). They were always aware of their own echolalia and tried to control it without effect. These cases demonstrate that neither the ability to repeat nor fluent speech are always necessary for echolalia. The possibility that a lesion in the left medial frontal lobe, including the supplementary motor area, plays an important role in effortful echolalia is discussed.

  9. CRISPR technologies for bacterial systems: Current achievements and future directions

    DEFF Research Database (Denmark)

    Choi, Kyeong Rok; Lee, Sang Yup

    2016-01-01

    Throughout the decades of its history, the advances in bacteria-based bio-industries have coincided with great leaps in strain engineering technologies. Recently unveiled clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated proteins (Cas) systems are now revolution......Throughout the decades of its history, the advances in bacteria-based bio-industries have coincided with great leaps in strain engineering technologies. Recently unveiled clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated proteins (Cas) systems are now...... revolutionizing biotechnology as well as biology. Diverse technologies have been derived from CRISPR/Cas systems in bacteria, yet the applications unfortunately have not been actively employed in bacteria as extensively as in eukaryotic organisms. A recent trend of engineering less explored strains in industrial...... microbiology-metabolic engineering, synthetic biology, and other related disciplines-is demanding facile yet robust tools, and various CRISPR technologies have potential to cater to the demands. Here, we briefly review the science in CRISPR/Cas systems and the milestone inventions that enabled numerous CRISPR...

  10. Transitions in the wrong direction? Digital technologies and daily life

    DEFF Research Database (Denmark)

    Røpke, Inge; Christensen, Toke Haunstrup

    2013-01-01

    The environmental implications of information and communication technology (ICT) have been the subject of study since the early 1990s. Although previous research covers energy issues quite extensively, the treatment of the energy impacts of ICT integration in everyday life is still inadequate. Th...

  11. 75 FR 34802 - Meeting To Learn of U.S. Information and Communications Technologies (ICT) Industry Efforts To...

    Science.gov (United States)

    2010-06-18

    .../non-governmental organizations and corporations is encouraged. In addition, presentations on the... Coordinator for International Communications and Information Policy (CIP) will hold a public meeting on July 9...) advocates international policies for expanded access to information and communication technologies (ICT...

  12. A Study of Performance and Effort Expectancy Factors among Generational and Gender Groups to Predict Enterprise Social Software Technology Adoption

    Science.gov (United States)

    Patel, Sunil S.

    2013-01-01

    Social software technology has gained considerable popularity over the last decade and has had a great impact on hundreds of millions of people across the globe. Businesses have also expressed their interest in leveraging its use in business contexts. As a result, software vendors and business consumers have invested billions of dollars to use…

  13. The Process of Planning and Designing Research for an Educational Telecommunications Effort. Satellite Technology Demonstration, Technical Report No. 0209.

    Science.gov (United States)

    Connolly, A. J.; And Others

    The Satellite Technology Demonstration (STD) designed research for a satellite-based communication system that would transmit educational television programs. Their procedures were subject to a series of external and internal evaluations by the project sponsors, the National Institute of Education. In regard to external evaluation, STD recommended…

  14. Producer firms, technology diffusion and spillovers to local suppliers : Examining the effects of Foreign Direct Investment and the technology gap

    NARCIS (Netherlands)

    Jordaan, J.A.

    2017-01-01

    In this paper, we conduct a detailed examination of the effects of Foreign Direct Investment (FDI) and the technology gap on local technology dissemination and spillovers. Using unique firm level data from surveys among FDI firms and domestic producer firms and a random sample of their suppliers in

  15. Future Directions for Building Services Technologies in Denmark

    DEFF Research Database (Denmark)

    Marsh, Rob

    2008-01-01

    strategies for the effective integration of building services, and by developing new industrialised solutions for building services. The paper is based on the current Danish situation, and is based on linking research on building services, user needs, building design and new industrial processes.  ......  The hypothesis of this paper is that industrial transformation in the Danish construction sector needs in the future to focus on integrating building services technologies into the buildings. This can be illustrated by analysing historical developments in building services usage, exploring design...

  16. Cascading Events, Technology and the Floods Directive: future challenges

    Directory of Open Access Journals (Sweden)

    Pescaroli Gianluca

    2016-01-01

    Full Text Available Cascading events can be referred to multidimensional disasters, where a primary trigger generates a nonlinear series of secondary emergencies that escalate in time, becoming eventually the priority to tackle. In this process, critical infrastructure can be handled as roots of vulnerabilities, because they accumulate both physical attributes and functional nodes. When compromised, they produce widespread breakdowns of society, but also orient emergency responses and long-term recovery. Although floods have been widely associated to the failure of vulnerable equipments or to the disruption of strategic sectors such as energy, communication and transportation, their integration with the emerging concept of cascading has been limited. This open topic presents many challenges for scholars, researchers and practitioners, in particular when the implementation of the EU Floods Directive is considered. The paper presents an overview of the Floods Directive and its relation with the cascading events, using case studies and examples from the existing literature to point out missing links and gaps in the legislation. Conclusions argue that the Directive considers only local geographical scales and limited temporal horizons, which can be result inadequate to limit the escalation of events.

  17. Technology Directions for the 21st Century. Volume 3

    Science.gov (United States)

    Crimi, Giles F.; Botta, Robert; Ditanna, Thomas; Verheggen, Henry; Stancati, Michael; Feingold, Harvey; Jacobs, Mark

    1996-01-01

    New technologies will unleash the huge capacity of fiber-optic cable to meet growing demands for bandwidth. Companies will continue to replace private networks with public network bandwidth-on-demand. Although asynchronous transfer mode (ATM) is the transmission technology favored by many, its penetration will be slower than anticipated. Hybrid networks - e.g., a mix of ATM, frame relay, and fast Ethernet - may predominate, both as interim and long-term solutions, based on factors such as availability, interoperability, and cost. Telecommunications equipment and services prices will decrease further due to increased supply and more competition. Explosive Internet growth will continue, requiring additional backbone transmission capacity and enhanced protocols, but it is not clear who will fund the upgrade. Within ten years, space-based constellations of satellites in Low Earth orbit (LEO) will serve mobile users employing small, low-power terminals. 'Little LEO's' will provide packet transmission services and geo-position determination. 'Big LEO's' will function as global cellular telephone networks, with some planning to offer video and interactive multimedia services. Geosynchronous satellites also are proposed for mobile voice grade links and high-bandwidth services. NASA may benefit from resulting cost reductions in components, space hardware, launch services, and telecommunications services.

  18. Conformal Ablative Thermal Protection System for Planetary and Human Exploration Missions:An Overview of the Technology Maturation Effort

    Science.gov (United States)

    Beck, Robin A S.; Arnold, James O.; Gasch, Matthew J.; Stackpoole, Margaret M.; Prabhu, Dinesh K.; Szalai, Christine E.; Wercinski, Paul F.; Venkatapathy, Ethiraj

    2013-01-01

    The Office of Chief Technologist, NASA identified the need for research and technology development in part from NASAs Strategic Goal 3.3 of the NASA Strategic Plan to develop and demonstrate the critical technologies that will make NASAs exploration, science, and discovery missions more affordable and more capable. Furthermore, the Game Changing Development Program is a primary avenue to achieve the Agencys 2011 strategic goal to Create the innovative new space technologies for our exploration, science, and economic future. The National Research Council (NRC) Space Technology Roadmaps and Priorities report highlights six challenges and they are: Mass to Surface, Surface Access, Precision Landing, Surface Hazard Detection and Avoidance, Safety and Mission Assurance, and Affordability. In order for NASA to meet these challenges, the report recommends immediate focus on Rigid and Flexible Thermal Protection Systems. Rigid TPS systems such as Avcoat or SLA are honeycomb based and PICA is in the form of tiles. The honeycomb systems are manufactured using techniques that require filling of each (38 cell) by hand, and in a limited amount of time all of the cells must be filled and the heatshield must be cured. The tile systems such as PICA pose a different challenge as the low strain-to-failure and manufacturing size limitations require large number of small tiles with gap-fillers between the tiles. Recent investments in flexible ablative systems have given rise to the potential for conformal ablative TPS. A conformal TPS over a rigid aeroshell has the potential to solve a number of challenges faced by traditional rigid TPS materials. The high strain-to-failure nature of the conformal ablative materials will allow integration of the TPS with the underlying aeroshell structure much easier and enable monolithic-like configuration and larger segments (or parts) to be used. By reducing the overall part count, the cost of installation (based on cost comparisons between blanket

  19. Direct Injection Compression Ignition Diesel Automotive Technology Education GATE Program

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Carl L

    2006-09-25

    The underlying goal of this prqject was to provide multi-disciplinary engineering training for graduate students in the area of internal combustion engines, specifically in direct injection compression ignition engines. The program was designed to educate highly qualified engineers and scientists that will seek to overcome teclmological barriers preventing the development and production of cost-effective high-efficiency vehicles for the U.S. market. Fu1iher, these highly qualified engineers and scientists will foster an educational process to train a future workforce of automotive engineering professionals who are knowledgeable about and have experience in developing and commercializing critical advanced automotive teclmologies. Eight objectives were defmed to accomplish this goal: 1. Develop an interdisciplinary internal co1nbustion engine curriculum emphasizing direct injected combustion ignited diesel engines. 2. Encourage and promote interdisciplinary interaction of the faculty. 3. Offer a Ph.D. degree in internal combustion engines based upon an interdisciplinary cuniculum. 4. Promote strong interaction with indusuy, develop a sense of responsibility with industry and pursue a self sustaining program. 5. Establish collaborative arrangements and network universities active in internal combustion engine study. 6. Further Enhance a First Class educational facility. 7. Establish 'off-campus' M.S. and Ph.D. engine programs of study at various indusuial sites. 8. Extend and Enhance the Graduate Experience.

  20. Diamond bits for directional drilling of wells and technology of using them

    Energy Technology Data Exchange (ETDEWEB)

    Romanov, V P; Steblev, B Ye; Sumaneyev, N N

    1979-01-01

    Characteristics are presented for a diamond bit for directional drilling ADN-08. Technology of using it is described, as well as cutter bits for directional drilling. Based on specially developed technique, the economic effect of using the diamond bits is calculated. This indicates that the use of the diamond bits in rocks of the VIII category significantly improves the quality of directional drilling.

  1. Cooperative efforts to improve nuclear materials accounting, control and physical protection at the National Science Center, Kharkov Institute of Physics and Technology

    International Nuclear Information System (INIS)

    Zelensky, V.F.; Mikhailov, V.A.

    1996-01-01

    The US Department of Energy (DOE) and the Ukrainian Government are engaged in a program of cooperation to enhance the nonproliferation of nuclear weapons by developing a strong national system of nuclear material protection, control, and accounting (MPC and A). This paper describes the capabilities and work of the Kharkov Institute of Physics and Technology (KIPT) and cooperative efforts to improve MPC and A at this facility. It describes how these cooperative efforts grew out of Ukraine''s decision to become a non-nuclear weapon state and the shortcomings in MPC and A that developed at KIPT after the disintegration of the former Soviet Union. It also envisions expanded future cooperation in other areas of nuclear materials management

  2. Biodiesel Production from Kapok (Ceiba pentandra Seed Oil using Naturally Alkaline Catalyst as an Effort of Green Energy and Technology

    Directory of Open Access Journals (Sweden)

    N.A. Handayani

    2013-10-01

    Full Text Available Nowadays, energy that used to serve all the needs of community, mainly generated from fossil (conventional energy. Terrace in energy consumption is not balanced with adequate fossil fuel reserves and will be totally depleted in the near future. Indonesian Government through a Presidential Decree No. 5 year 2006 mandates an increased capacity in renewable energy production from 5 percent to 15 percent in 2025. C. pentandra seed oil has feasibility as a sustainable biodiesel feedstock in Indonesia. The aim of this paper was to investigate biodiesel production from ceiba petandra seed oil using naturally potassium hydroxide catalyst. Research designs are based on factorial design with 2 levels and 3 independent variables (temperature, reaction time and molar ratio of methanol to oil. According to data calculation, the most influential single variable is molar ratio of methanol to oil. Characterization of biodiesel products meet all the qualifications standardized by SNI 04-7182-2006. Keywords: biodiesel, kapok seed oil, c. pentandra, green technology

  3. Direct hydrocarbon exploration and gas reservoir development technology

    Energy Technology Data Exchange (ETDEWEB)

    Kwak, Young Hoon; Oh, Jae Ho; Jeong, Tae Jin [Korea Inst. of Geology Mining and Materials, Taejon (Korea, Republic of); and others

    1995-12-01

    In order to enhance the capability of petroleum exploration and development techniques, three year project (1994 - 1997) was initiated on the research of direct hydrocarbon exploration and gas reservoir development. This project consists of four sub-projects. (1) Oil(Gas) - source rock correlation technique: The overview of bio-marker parameters which are applicable to hydrocarbon exploration has been illustrated. Experimental analysis of saturated hydrocarbon and bio-markers of the Pohang E and F core samples has been carried out. (2) Study on surface geochemistry and microbiology for hydrocarbon exploration: the test results of the experimental device for extraction of dissolved gases from water show that the device can be utilized for the gas geochemistry of water. (3) Development of gas and gas condensate reservoirs: There are two types of reservoir characterization. For the reservoir formation characterization, calculation of conditional simulation was compared with that of unconditional simulation. In the reservoir fluid characterization, phase behavior calculations revealed that the component grouping is more important than the increase of number of components. (4) Numerical modeling of seismic wave propagation and full waveform inversion: Three individual sections are presented. The first one is devoted to the inversion theory in general sense. The second and the third sections deal with the frequency domain pseudo waveform inversion of seismic reflection data and refraction data respectively. (author). 180 refs., 91 figs., 60 tabs.

  4. Information and communication technology demands at work : the association with job strain, effort-reward imbalance and self-rated health in different socio-economic strata

    OpenAIRE

    Stadin, Magdalena; Nordin, Maria; Broström, Anders; Magnusson Hanson, Linda L.; Westerlund, Hugo; Fransson, Eleonor I.

    2016-01-01

    The use of information and communication technology (ICT) is common in modern working life. ICT demands may give rise to experience of work-related stress. Knowledge about ICT demands in relation to other types of work-related stress and to self-rated health is limited. Consequently, the aim of this study was to examine the association between ICT demands and two types of work-related stress [job strain and effort-reward imbalance (ERI)] and to evaluate the association between these work-rela...

  5. Direct disposal of spent nuclear fuel. The current status of technology January 1987

    International Nuclear Information System (INIS)

    Wheelton, I.S.; Kelly, B.R.; Wood, E.

    1987-02-01

    The Study assesses the degree and status of research and development worldwide on Direct Disposal of Spent Nuclear Fuel. It is limited to technological, radiological and waste management aspects appertaining to Light Water and AGR Reactor Systems and reviews the 'State of the Art' in terms of applicability to the United Kingdom. The report concludes that much technology exists both at National and International level which the UK can apply to the subject of Direct Disposal. (author)

  6. Self-Directed Learning: College Students' Technology Preparedness Change in the Last 10 Years

    Science.gov (United States)

    Caravello, Michael J.; Jiménez, Joel R.; Kahl, Lois J.; Brachio, Brian; Morote, Elsa-Sofia

    2015-01-01

    This study compares a sample of approximately 44 first year college students in 2005 and 2015 on Long Island, New York, in their technology preparedness and self-directed instruction. The researchers used a survey instrument including demographic information focused upon students' preparation for classroom technology in high school and college.…

  7. 1997 Annual report. Technological Research Direction; Informe Anual 1997. Direccion de Investigacion Tecnologica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    This document describes the results for one year of work. Here is presented the goals of the Technological Research Direction of the National Institute of Nuclear Research in Mexico, which is promoting and developing the production of high technologies in the nuclear sciences and related disciplines as well as to generate the technologies, products, quality insume for academic organizations, health, industrial and commercial that are required. (Author)

  8. Digital technology use in ELT classrooms and self-directed learning

    Directory of Open Access Journals (Sweden)

    Nehir Sert

    2016-04-01

    Full Text Available The digital era is a new challenge for teachers. While children get acquainted with digital technology before the age of six, teachers, who have encountered the digital world at a later time in their lives, struggle with it. Self-directed learning, which is crucial for lifelong learning, can be enhanced by the use of technology within and beyond classroom settings. The aim of this study was to examine the difference between the perceptions of students in low- and high-income groups about their use of technology in a general sense and their teachers’ use of technology in ELT classrooms. It also tested the correlation between the perceptions of their self-directed learning behaviours and their own/their teachers’ technology use. The population of the study consisted of 75 students from high- and 70 students from low-income groups. Causal comparative and correlational research methods were adopted in the study. The surveys to measure the students’ perceptions about technology use were developed by the researchers. A scale, established by Demirtas and Sert (2010, was used to identify the level of self-directed learning views of the students. The data were collected at the beginning of the first term of the 2015-2016 school year. The results indicated that there was no significant difference between perceptions of the low- and high-income students regarding their own technology use. Likewise, perceptions of the low- and high-income students did not differ regarding their teachers’ technology use. There was no correlation between the perceptions of the low-/high-income mixed group regarding their use of technology and their teachers’ use of technology. Lastly, self-directed learning perceptions of the low-/high-income mixed group did not correlate with their perceptions on any aspects of technology use. The educational implications of these results were discussed and suggestions were put forward in order to produce more effective learning

  9. Assessment of High-Voltage Photovoltaic Technologies for the Design of a Direct Drive Hall Effect Thruster Solar Array

    Science.gov (United States)

    Mikellides, I. G.; Jongeward, G. A.; Schneider, T.; Carruth, M. R.; Peterson, T.; Kerslake, T. W.; Snyder, D.; Ferguson, D.; Hoskins, A.

    2004-01-01

    A three-year program to develop a Direct Drive Hall-Effect Thruster system (D2HET) begun in 2001 as part of the NASA Advanced Cross-Enterprise Technology Development initiative. The system, which is expected to reduce significantly the power processing, complexity, weight, and cost over conventional low-voltage systems, will employ solar arrays that operate at voltages higher than (or equal to) 300 V. The lessons learned from the development of the technology also promise to become a stepping-stone for the production of the next generation of power systems employing high voltage solar arrays. This paper summarizes the results from experiments conducted mainly at the NASA Marshal Space Flight Center with two main solar array technologies. The experiments focused on electron collection and arcing studies, when the solar cells operated at high voltages. The tests utilized small coupons representative of each solar array technology. A hollow cathode was used to emulate parts of the induced environment on the solar arrays, mostly the low-energy charge-exchange plasma (1012-1013 m-3 and 0.5-1 eV). Results and conclusions from modeling of electron collection are also summarized. The observations from the total effort are used to propose a preliminary, new solar array design for 2 kW and 30-40 kW class, deep space missions that may employ a single or a cluster of Hall- Effect thrusters.

  10. Foreign direct investment and technology spillovers in Mexico: 20 years of NAFTA

    OpenAIRE

    Armas, Enrique; Rodríguez, José Carlos

    2017-01-01

    This article analyses the development of technology capabilities in the manufacturing sector of Mexico during the last two decades. It has been argued that the inclusion of Mexico in the North America Free Trade Agreement (NAFTA) in 1994 would be enough to catch up with Canada and the United States. In this regard, trade liberalisation and foreign direct investment (FDI) would have been two strategic tools to close the technology gap between Mexico and its commercial partners in North America...

  11. Field demonstration and transition of SCAPS direct push VOC in-situ sensing technologies

    International Nuclear Information System (INIS)

    Davis, William M.

    1999-01-01

    This project demonstrated two in-situ volatile organic compound (VOC) samplers in combination with the direct sampling ion trap mass spectrometer (DSITMS). The technologies chosen were the Vadose Sparge and the Membrane Interface Probe (MIP) sensing systems. Tests at two demonstration sites showed the newer VOC technologies capable of providing in situ contaminant measurements at two to four times the rate of the previously demonstrated Hydrosparge sensor. The results of this project provide initial results supporting the utility of these new technologies to provide rapid site characterization of VOC contaminants in the subsurface

  12. Horizontal directional drilling: a green and sustainable technology for site remediation.

    Science.gov (United States)

    Lubrecht, Michael D

    2012-03-06

    Sustainability has become an important factor in the selection of remedies to clean up contaminated sites. Horizontal directional drilling (HDD) is a relatively new drilling technology that has been successfully adapted to site remediation. In addition to the benefits that HDD provides for the logistics of site cleanup, it also delivers sustainability advantages, compared to alternative construction methods.

  13. Commentary on Future directions: Building technologies and design tools''

    Energy Technology Data Exchange (ETDEWEB)

    Quadrel, R.W.

    1992-08-10

    This paper presents a number of interesting and thought-provoking scenarios about the future use of advanced technology in the design and operation of commercial buildings. I will express my reactions in the following series of short paragraphs. These thoughts will, I hope, raise some new questions and offer fruitful directions for further exploration.

  14. Dynamic effects of social influence and direct marketing on the adoption of high-technology products

    NARCIS (Netherlands)

    Risselada, H.; Verhoef, P.C.; Bijmolt, T.H.A.

    Many firms capitalize on their customers' social networks to improve the success rate of their new products. In this article, the authors analyze the dynamic effects of social influence and direct marketing on the adoption of a new high-technology product. Social influence is likely to play a role

  15. Technologies for direct production of flexible H2/CO synthesis gas

    International Nuclear Information System (INIS)

    Song Xueping; Guo Zhancheng

    2006-01-01

    The use of synthesis gas offers the opportunity to furnish a broad range of environmentally clean fuels and high value chemicals. However, synthesis gas manufacturing systems based on natural gas are capital intensive, and hence, there is great interest in technologies for cost effective synthesis gas production. Direct production of synthesis gas with flexible H 2 /CO ratio, which is in agreement with the stoichiometric ratios required by major synthesis gas based petrochemicals, can decrease the capital investment as well as the operating cost. Although CO 2 reforming and catalytic partial oxidation can directly produce desirable H 2 /CO synthesis gas, they are complicated and continued studies are necessary. In fact, direct production of flexible H 2 /CO synthesis gas can be obtained by optimizing the process schemes based on steam reforming and autothermal reforming as well as partial oxidation. This paper reviews the state of the art of the technologies

  16. Information and communication technology demands at work: the association with job strain, effort-reward imbalance and self-rated health in different socio-economic strata.

    Science.gov (United States)

    Stadin, Magdalena; Nordin, Maria; Broström, Anders; Magnusson Hanson, Linda L; Westerlund, Hugo; Fransson, Eleonor I

    2016-10-01

    The use of information and communication technology (ICT) is common in modern working life. ICT demands may give rise to experience of work-related stress. Knowledge about ICT demands in relation to other types of work-related stress and to self-rated health is limited. Consequently, the aim of this study was to examine the association between ICT demands and two types of work-related stress [job strain and effort-reward imbalance (ERI)] and to evaluate the association between these work-related stress measures and self-rated health, in general and in different SES strata. This study is based on cross-sectional data from the Swedish Longitudinal Occupational Survey of Health collected in 2014, from 14,873 gainfully employed people. ICT demands, job strain, ERI and self-rated health were analysed as the main measures. Sex, age, SES, lifestyle factors and BMI were used as covariates. ICT demands correlated significantly with the dimensions of the job strain and ERI models, especially with the demands (r = 0.42; p work-related stress in modern working life.

  17. Blood ketones are directly related to fatigue and perceived effort during exercise in overweight adults adhering to low-carbohydrate diets for weight loss: a pilot study.

    Science.gov (United States)

    White, Andrea M; Johnston, Carol S; Swan, Pamela D; Tjonn, Sherrie L; Sears, Barry

    2007-10-01

    Ketogenic diets have been associated with reductions in free-living physical activity, a response that can be counterproductive in individuals trying to lose weight. To explore whether popular low-carbohydrate diets might impact the desire to exercise by raising blood ketone concentrations, fatigue and perceived effort during exercise were compared in untrained, overweight adults adhering to a ketogenic low-carbohydrate diet or to a control diet low in carbohydrate, but not ketogenic (5%, 65%, and 30% or 40%, 30%, and 30% of energy from carbohydrate, fat, and protein, respectively). In this prospective, randomized, 2-week pilot study, all meals and snacks were provided to subjects, and energy intake was strictly controlled to provide approximately 70% of that needed for weight maintenance. At baseline and at the end of week 2, exercise testing was conducted in fasting participants. Weight loss and the reductions in fat mass did not differ by group during the trial. At week 2, blood beta-hydroxybutyrate concentrations were 3.6-fold greater for the ketogenic vs nonketogenic group (P=0.018) and correlated significantly with perceived exercise effort (r2=0.22, P=0.049). Blood beta-hydroxybutyrate was also significantly correlated to feelings of "fatigue" (r=0.458, P=0.049) and to "total mood disturbance" (r=0.551, P=0.015) while exercising. These pilot data indicate that ketogenic, low-carbohydrate diets enhance fatigability and can reduce the desire to exercise in free-living individuals.

  18. Conformal Ablative Thermal Protection System for Planetary and Human Exploration Missions: Overview of the Technology Maturation Efforts Funded by NASA's Game Changing Development Program

    Science.gov (United States)

    Beck, Robin A.; Arnold, James O.; Gasch, Matthew J.; Stackpoole, Margaret M.; Fan, Wendy; Szalai, Christine E.; Wercinski, Paul F.; Venkatapathy, Ethiraj

    2012-01-01

    The Office of Chief Technologist (OCT), NASA has identified the need for research and technology development in part from NASA's Strategic Goal 3.3 of the NASA Strategic Plan to develop and demonstrate the critical technologies that will make NASA's exploration, science, and discovery missions more affordable and more capable. Furthermore, the Game Changing Development Program (GCDP) is a primary avenue to achieve the Agency's 2011 strategic goal to "Create the innovative new space technologies for our exploration, science, and economic future." In addition, recently released "NASA space Technology Roadmaps and Priorities," by the National Research Council (NRC) of the National Academy of Sciences stresses the need for NASA to invest in the very near term in specific EDL technologies. The report points out the following challenges (Page 2-38 of the pre-publication copy released on February 1, 2012): Mass to Surface: Develop the ability to deliver more payload to the destination. NASA's future missions will require ever-greater mass delivery capability in order to place scientifically significant instrument packages on distant bodies of interest, to facilitate sample returns from bodies of interest, and to enable human exploration of planets such as Mars. As the maximum mass that can be delivered to an entry interface is fixed for a given launch system and trajectory design, the mass delivered to the surface will require reduction in spacecraft structural mass; more efficient, lighter thermal protection systems; more efficient lighter propulsion systems; and lighter, more efficient deceleration systems. Surface Access: Increase the ability to land at a variety of planetary locales and at a variety of times. Access to specific sites can be achieved via landing at a specific location (s) or transit from a single designated landing location, but it is currently infeasible to transit long distances and through extremely rugged terrain, requiring landing close to the

  19. Directed International Technological Change and Climate Policy: New Methods for Identifying Robust Policies Under Conditions of Deep Uncertainty

    Science.gov (United States)

    Molina-Perez, Edmundo

    It is widely recognized that international environmental technological change is key to reduce the rapidly rising greenhouse gas emissions of emerging nations. In 2010, the United Nations Framework Convention on Climate Change (UNFCCC) Conference of the Parties (COP) agreed to the creation of the Green Climate Fund (GCF). This new multilateral organization has been created with the collective contributions of COP members, and has been tasked with directing over USD 100 billion per year towards investments that can enhance the development and diffusion of clean energy technologies in both advanced and emerging nations (Helm and Pichler, 2015). The landmark agreement arrived at the COP 21 has reaffirmed the key role that the GCF plays in enabling climate mitigation as it is now necessary to align large scale climate financing efforts with the long-term goals agreed at Paris 2015. This study argues that because of the incomplete understanding of the mechanics of international technological change, the multiplicity of policy options and ultimately the presence of climate and technological change deep uncertainty, climate financing institutions such as the GCF, require new analytical methods for designing long-term robust investment plans. Motivated by these challenges, this dissertation shows that the application of new analytical methods, such as Robust Decision Making (RDM) and Exploratory Modeling (Lempert, Popper and Bankes, 2003) to the study of international technological change and climate policy provides useful insights that can be used for designing a robust architecture of international technological cooperation for climate change mitigation. For this study I developed an exploratory dynamic integrated assessment model (EDIAM) which is used as the scenario generator in a large computational experiment. The scope of the experimental design considers an ample set of climate and technological scenarios. These scenarios combine five sources of uncertainty

  20. Environmental Measurement-While-Drilling System and Horizontal Directional Drilling Technology Demonstration, Hanford Site

    International Nuclear Information System (INIS)

    Williams, C.V.; Lockwood, G.J.; Normann, R.A.; Myers, D.A.; Gardner, M.G.; Williamson, T.; Huffman, J.

    1999-01-01

    The Environmental Measurement-While-Drilling (EMWD) system and Horizontal Directional Drilling (HDD) were successfully demonstrated at the Mock Tank Leak Simulation Site and the Drilling Technology Test Site, Hanford, Washington. The use of directional drilling offers an alternative to vertical drilling site characterization. Directional drilling can develop a borehole under a structure, such as a waste tank, from an angled entry and leveling off to horizontal at the desired depth. The EMWD system represents an innovative blend of new and existing technology that provides the capability of producing real-time environmental and drill bit data during drilling operations. The technology demonstration consisted of the development of one borehole under a mock waste tank at a depth of approximately minus8 m (minus27 ft.), following a predetermined drill path, tracking the drill path to within a radius of approximately1.5 m (5 ft.), and monitoring for zones of radiological activity using the EMWD system. The purpose of the second borehole was to demonstrate the capability of drilling to a depth of ∼ -21 m (-70 ft.), the depth needed to obtain access under the Hanford waste tanks, and continue drilling horizontally. This report presents information on the HDD and EMWD technologies, demonstration design, results of the demonstrations, and lessons learned

  1. Digital technology use in ELT classrooms and self-directed learning

    OpenAIRE

    Nehir Sert; Ebru Boynueğri

    2016-01-01

    The digital era is a new challenge for teachers. While children get acquainted with digital technology before the age of six, teachers, who have encountered the digital world at a later time in their lives, struggle with it. Self-directed learning, which is crucial for lifelong learning, can be enhanced by the use of technology within and beyond classroom settings. The aim of this study was to examine the difference between the perceptions of students in low- and high-income groups about thei...

  2. Novel Direct Steelmaking by Combining Microwave, Electric Arc, and Exothermal Heating Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Xiaodi Huang; Dr. J. Y. Hwang

    2005-03-28

    Steel is a basic material broadly used by perhaps every industry and individual. It is critical to our nation's economy and national security. Unfortunately, the American steel industry is losing competitiveness in the world steel production field. There is an urgent need to develop the next generation of steelmaking technology for the American steel industry. Direct steelmaking through the combination of microwave, electric arc, and exothermal heating is a revolutionary change from current steelmaking technology. This technology can produce molten steel directly from a shippable agglomerate, consisting of iron oxide fines, powdered coal, and ground limestone. This technology is projected to eliminate many current intermediate steelmaking steps including coking, pellet sintering, blast furnace (BF) ironmaking, and basic oxygen furnace (BOF) steelmaking. This technology has the potential to (a) save up to 45% of the energy consumed by conventional steelmaking; (b) dramatically reduce the emission of CO{sub 2}, SO{sub 2}, NO{sub x}, VOCs, fine particulates, and air toxics; (c) substantially reduce waste and emission control costs; (d) greatly lower capital cost; and (e) considerably reduce steel production costs. This technology is based on the unique capability of microwaves to rapidly heat steelmaking raw materials to elevated temperature, then rapidly reduce iron oxides to metal by volumetric heating. Microwave heating, augmented with electric arc and exothermal reactions, is capable of producing molten steel. This technology has the components necessary to establish the ''future'' domestic steel industry as a technology leader with a strong economically competitive position in world markets. The project goals were to assess the utilization of a new steelmaking technology for its potential to achieve better overall energy efficiency, minimize pollutants and wastes, lower capital and operating costs, and increase the competitiveness of the

  3. Direction of reprocessing technology development based on 30 years operation of Tokai reprocessing plant

    International Nuclear Information System (INIS)

    Nomura, S; Tanaka, T.; Ohshima, H.

    2006-01-01

    Full text: Full text: Recent global interest focuses the possibility of recycling of spent fuel with advanced fast reactor fuel cycle system. Goal of closed fuel cycle is to achieve the maximum use of uranium resources and minimum disposal of waste by multi recycle of TRU as a competitive nuclear energy system. The future reprocessing and fuel fabrication system should be synchronized completely with the advanced reactor system and waste treatment and disposal back-end system to complete closed fuel cycle. To realize such system, current reprocessing system should be changed to handle Pu-U-Minor Actinide with more reductions in the cost and less waste volume, as well as an inherent proliferation resistance. For the successful industrialization of advanced reprocessing technology, it is necessary to combine three key elements of R and D efforts, engineering base demonstration and experiences of plant operation. Tokai Reprocessing Facilities licensed a maximum capacity of 0.7tHM/day began a hot operation in 1977 and reprocessed l,100tHM U02 spent fuel and 20tHM ATR-MOX with a continuous technological improvements under IAEA full scope safeguards. With 30 years experience, candidate of key technologies proposed for realizing the next advanced reprocessing are as follows: 1) Simplified co-extraction process of Pu-Np-U by using multistage centrifugal extractors in stead of pulsed columns; 2) Corrosion free components in acid condition by using corrosion resistant refractory alloys and ceramics; 3) Co-conversion technology to MA containing MOX powder by micro-wave heating method for a short process for MA containing MOX pellets fabrication; 4) Advanced verification of high level radioactive liquid waste combining separation technology of TRU and LLFP elements; 5) Advanced chemical analysis and monitoring system for TRU elements in a plant. These advanced reprocessing technologies will be applied mainly to reprocess the LWR spent fuel accumulated past and future

  4. Prospects of power conversion technology of direct-cycle helium gas turbine for MHTGR

    International Nuclear Information System (INIS)

    Li Yong; Zhang Zuoyi

    1999-01-01

    The modular high temperature gas cooled reactor (MHTGR) is a modern passively safe reactor. The reactor and helium gas turbine may be combined for high efficiency's power conversion, because MHTGR has high outlet temperature up to 950 degree C. Two different schemes are planed separately by USA and South Africa. the helium gas turbine methodologies adopted by them are mainly based on the developed heavy duty industrial and aviation gas turbine technology. The author introduces the differences of two technologies and some design issues in the design and manufacture. Moreover, the author conclude that directly coupling a closed Brayton cycle gas turbine concept to the passively safe MHTGR is the developing direction of MHTGR due to its efficiency which is much higher than that of using steam turbine

  5. Directions of Increasing Competition in Clothes and Textiles Industry on the Basis of Information Technologies

    Directory of Open Access Journals (Sweden)

    Daina Jansevičiūtė

    2011-04-01

    Full Text Available The importance of the clothes and textile sector in Lithuanian economy is discussed and declining trends of the sector values for the economy warns about the problems of competitiveness in the current economic conditions. The main factors behind the decline in the competitiveness of the sector are provided; and directions of the development, which are associated with the intensified use of information technologies to create new competitive advantages of the sector, are analysed.Article in Lithuanian

  6. Histology-directed and imaging mass spectrometry: an emerging technology in ectopic calcification

    OpenAIRE

    Taverna, Domenico; Boraldi, Federica; De Santis, Giorgio; Caprioli, Richard M; Quaglino, Daniela

    2015-01-01

    The present study was designed to demonstrate the potential of an optimized histology directed protein identification combined with imaging mass spectrometry technology to reveal and identify molecules associated to ectopic calcification in human tissue. As a proof of concept, mineralized and non-mineralized areas were compared within the same dermal tissue obtained from a patient affected by Pseudoxanthoma elasticum, a genetic disorder characterized by calcification only at specific sites of...

  7. THE SOCIAL AND ECONOMIC DIRECTIONS OF DEVELOPMENT OF IT-TECHNOLOGIES IN SYSTEM OF INTERNET BANKING

    Directory of Open Access Journals (Sweden)

    Irina Sergeevna Vinnikova

    2015-12-01

    Full Text Available Relevance of work is caused by active introduction of IT-technologies in various spheres of economic activity and in particular the bank environment, and also social and economic problems of use of information systems which arose along with a world economic crisis, sanctions and growth of the competition.Purpose: to define the main social and economic problems and the directions of development of IT-technologies in system of Internet banking at the present stage.Methodology: general scientific methods were used: analysis and synthesis, comparison, generalization, system approach.Results. Features of development of IT-technologies within remote bank customer service in Russia are defined. The directions of development of IT-technologies of the BSS company from a position of dynamic distribution of Internet banking in the future and from a position of development of the relations with clients are presented.Practical implications: results of research will be demanded by the scientists dealing with problems of Internet banking, heads of the commercial banks dealing with issues of remote bank service, students, undergraduates and graduate students of higher educational institutions.

  8. The direct exploitation in the mangrove ecosystem in Central Java and the land use in its surrounding; degradation and its restoration effort

    Directory of Open Access Journals (Sweden)

    AHMAD DWI SETYAWAN

    2006-07-01

    Full Text Available The aims of the research were to find out (i the direct exploitation in the mangrove ecosystem, (ii the land use in its surrounding, and (iii the restoration activities in the mangrove ecosystem in northern coast and southern coast of Central Java Province. This was descriptive research that was done qualitatively, in July until December 2003, at 20 sites of mangrove habitat. The data was collected in field surveys, in-depth interview to local people and/or local government, and examination of topographic maps of Java (1963-1965 and digital satellite image of Landsat 7 TM (July-September 2001. The result indicated that the direct exploitation in the mangrove ecosystem included fishery, forestry, food stuff, cattle woof, medicinal stuff, industrial material, and also tourism and education. The land use around mangrove ecosystem included fishery/embankment, agriculture, and the area of developing and building. The anthropogenic activities had been degraded mangrove ecosystem, it was called for restoration. The mangrove restoration had been done success in Pasar Banggi, but it failed in Cakrayasan and Lukulo.

  9. Direction of Technology Development for Nuclear Power Plants at the O and M Phase

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Insu; Park, Hwanpyo; Kim, Younghyun [Korea Institute of Construction Technology, Goyang (Korea, Republic of)

    2014-05-15

    Recently, Korea has attempted to advance overseas markets by securing competitive power in nuclear power technology. In order to develop and operate overall construction management systems with Korea's own brand equipped with sufficient applicability and competitive power in the market abroad and to ensure equal competitive power with other foreign advanced companies of nuclear power plants, Korea has launched a project called 'Data Centric Integration/Automation Technology for NP Project Management System' since July 2011. This project is divided into two phases: the first phase from 2012 to 2016 realizes EPCS stage, and the second phase from 2017 to 2020 extends to O and M stage. Appropriate technology development planning must be established if 'Data Centric Integration/Automation Technology for NP Project Management System' conducted at the first phase would extend to O and M stage at the second phase. Therefore, this study aimed at drawing out the direction of technology development based on present analysis of process at the operational phase of nuclear power plants in Korea conducted as previous study. This study analyzed current operation and maintenance systems first, analyzing the results of differences between the operation process of nuclear plants in Korea which was suggested at the previous study and the process of the Korea Hydro and Nuclear Power Co., Ltd. (hereafter referred to as 'KHNP') and drawing out the direction of technology development for nuclear power plants at the operational phase from the viewpoint of life cycle.

  10. Direction of Technology Development for Nuclear Power Plants at the O and M Phase

    International Nuclear Information System (INIS)

    Jung, Insu; Park, Hwanpyo; Kim, Younghyun

    2014-01-01

    Recently, Korea has attempted to advance overseas markets by securing competitive power in nuclear power technology. In order to develop and operate overall construction management systems with Korea's own brand equipped with sufficient applicability and competitive power in the market abroad and to ensure equal competitive power with other foreign advanced companies of nuclear power plants, Korea has launched a project called 'Data Centric Integration/Automation Technology for NP Project Management System' since July 2011. This project is divided into two phases: the first phase from 2012 to 2016 realizes EPCS stage, and the second phase from 2017 to 2020 extends to O and M stage. Appropriate technology development planning must be established if 'Data Centric Integration/Automation Technology for NP Project Management System' conducted at the first phase would extend to O and M stage at the second phase. Therefore, this study aimed at drawing out the direction of technology development based on present analysis of process at the operational phase of nuclear power plants in Korea conducted as previous study. This study analyzed current operation and maintenance systems first, analyzing the results of differences between the operation process of nuclear plants in Korea which was suggested at the previous study and the process of the Korea Hydro and Nuclear Power Co., Ltd. (hereafter referred to as 'KHNP') and drawing out the direction of technology development for nuclear power plants at the operational phase from the viewpoint of life cycle

  11. Mapping telemedicine efforts

    DEFF Research Database (Denmark)

    Kierkegaard, Patrick

    2015-01-01

    are being utilized? What medical disciplines are being addressed using telemedicine systems? Methods: All data was surveyed from the "Telemedicinsk Landkort", a newly created database designed to provide a comprehensive and systematic overview of all telemedicine technologies in Denmark. Results......Objectives: The aim of this study is to survey telemedicine services currently in operation across Denmark. The study specifically seeks to answer the following questions: What initiatives are deployed within the different regions? What are the motivations behind the projects? What technologies......: The results of this study suggest that a growing number of telemedicine initiatives are currently in operation across Denmark but that considerable variations existed in terms of regional efforts as the number of operational telemedicine projects varied from region to region. Conclusions: The results...

  12. Design and investigation of planar technology based ultra-wideband antenna with directional radiation patterns

    Energy Technology Data Exchange (ETDEWEB)

    Meena, M. L., E-mail: madan.meena.ece@gamil.com; Parmar, Girish, E-mail: girish-parmar2002@yahoo.com; Kumar, Mithilesh, E-mail: mith-kr@yahoo.com [Department of Electronics Engineering, Rajasthan Technical University, Kota (India)

    2016-03-09

    A novel design technique based on planar technology for ultra-wideband (UWB) antennas with different ground shape having directional radiation pattern is being presented here. Firstly, the L-shape corner reflector ground plane antenna is designed with microstrip feed line in order to achieve large bandwidth and directivity. Thereafter, for the further improvement in the directivity as well as for better impedance matching the parabolic-shape ground plane has been introduced. The coaxial feed line is given for the proposed directional antenna in order to achieve better impedance matching with 50 ohm transmission line. The simulation analysis of the antenna is done on CST Microwave Studio software using FR-4 substrate having thickness of 1.6 mm and dielectric constant of 4.4. The simulated result shows a good return loss (S11) with respect to -10 dB. The radiation pattern characteristic, angular width, directivity and bandwidth performance of the antenna have also been compared at different resonant frequencies. The designed antennas exhibit low cost, low reflection coefficient and better directivity in the UWB frequency band.

  13. Foreign direct investment and technology spillovers in Mexico: 20 years of NAFTA

    Directory of Open Access Journals (Sweden)

    Enrique Armas

    2017-10-01

    Full Text Available This article analyses the development of technology capabilities in the manufacturing sector of Mexico during the last two decades. It has been argued that the inclusion of Mexico in the North America Free Trade Agreement (NAFTA in 1994 would be enough to catch up with Canada and the United States. In this regard, trade liberalisation and foreign direct investment (FDI would have been two strategic tools to close the technology gap between Mexico and its commercial partners in North America. Yet, after twenty years of NAFTA, it has been demonstrated that many indigenous firms in Mexico must develop an absorptive capacity to benefit from FDI. This paper suggests that the debate on the Asian miracle in the 1990s could be an adequate theoretical framework to discuss technology development and industrialisation in the case of emerging economies. In fact, this debate reveals two alternative approaches to explain the development of technology capabilities: (i the accumulation view of growth, and (ii the assimilation view of growth. Therefore, the Asian miracle exemplifies how entrepreneurship, learning and a supporting innovation policy could be an adequate strategy to benefit from FDI and technology spillovers in the case of emerging economies.

  14. mSpray: a mobile phone technology to improve malaria control efforts and monitor human exposure to malaria control pesticides in Limpopo, South Africa.

    Science.gov (United States)

    Eskenazi, Brenda; Quirós-Alcalá, Lesliam; Lipsitt, Jonah M; Wu, Lemuel D; Kruger, Philip; Ntimbane, Tzundzukani; Nawn, John Burns; Bornman, M S Riana; Seto, Edmund

    2014-07-01

    Recent estimates indicate that malaria has led to over half a million deaths worldwide, mostly to African children. Indoor residual spraying (IRS) of insecticides is one of the primary vector control interventions. However, current reporting systems do not obtain precise location of IRS events in relation to malaria cases, which poses challenges for effective and efficient malaria control. This information is also critical to avoid unnecessary human exposure to IRS insecticides. We developed and piloted a mobile-based application (mSpray) to collect comprehensive information on IRS spray events. We assessed the utility, acceptability and feasibility of using mSpray to gather improved homestead- and chemical-level IRS coverage data. We installed mSpray on 10 cell phones with data bundles, and pilot tested it with 13 users in Limpopo, South Africa. Users completed basic information (number of rooms/shelters sprayed; chemical used, etc.) on spray events. Upon submission, this information as well as geographic positioning system coordinates and time/date stamp were uploaded to a Google Drive Spreadsheet to be viewed in real time. We administered questionnaires, conducted focus groups, and interviewed key informants to evaluate the utility of the app. The low-cost, cell phone-based "mSpray" app was learned quickly by users, well accepted and preferred to the current paper-based method. We recorded 2865 entries (99.1% had a GPS accuracy of 20 m or less) and identified areas of improvement including increased battery life. We also identified a number of logistic and user problems (e.g., cost of cell phones and cellular bundles, battery life, obtaining accurate GPS measures, user errors, etc.) that would need to be overcome before full deployment. Use of cell phone technology could increase the efficiency of IRS malaria control efforts by mapping spray events in relation to malaria cases, resulting in more judicious use of chemicals that are potentially harmful to humans

  15. The main directions of technologic modernization in the field of subsurface resources management

    Directory of Open Access Journals (Sweden)

    Vyacheslav Petrovich Pakhomov

    2011-09-01

    Full Text Available One of the priorities of Russia's transition to post-industrial development is the upgrade of mineral resources sector as a major system-building industry which includes exploration, extraction, refining, transportation and processing of minerals. The main directions of modernization in the subsoil resources management are improvement of methods and technologies under exploration, automation and computerization of work and equipment at the stages of production and transportation of mineral resources, improvement of equipment and technology with the use of nanotechnology in the stages of enrichment and processing of mineral raw materials. Actual direction of modernization in the ore mining industry today is creation and improvement of techniques and technologies to work in the northern climate according to the Program of subsoil resources development of the North and the Arctic shelf. Due to the exhaustion of large raw mineral deposits and geological complexity of the conditions of mining, there is a need for new types of mining and extraction equipment in the industry and development of processes to extract minerals from the non-traditional raw materials.

  16. Financing investment in environmentally sound technologies: Foreign direct investment versus foreign debt finance

    International Nuclear Information System (INIS)

    Anyangah, Joshua Okeyo

    2010-01-01

    This paper develops a screening model to examine the relationship between alternative sources of private capital and investment in environmentally sound technologies (ESTs). In the model, a polluter (agent) must secure investment funds from the international financial markets in order to upgrade its production and abatement technology. The requisite capital can be obtained via either market loans (debt finance) or foreign direct investment (FDI). Under debt finance, the foreign financier supplies only capital and the relationship between the two parties is more 'arms-length'. By contrast, under FDI, the investor delivers both capital and managerial skills. We use the model to derive the implications of debt finance for optimal investment decisions and compare them to those obtained under FDI. Investment incentives are more pronounced under debt finance. (author)

  17. Digital Technologies in the Treatment of Anxiety: Recent Innovations and Future Directions.

    Science.gov (United States)

    Firth, Joseph; Torous, John; Carney, Rebekah; Newby, Jill; Cosco, Theodore D; Christensen, Helen; Sarris, Jerome

    2018-05-19

    This review aims to provide a comprehensive overview of the efficacy, limitations, and future of e-health treatments for anxiety. Within this, we provide detail on "first-generation" e-health approaches, such as computerized therapies. Additionally, we assess the emergence and early efficacy of newer methods of treatment delivery, including smartphone apps and virtual reality interventions, discussing the potential and pitfalls for each. There is now substantial clinical research demonstrating the efficacy of internet-delivered cognitive behavioral therapy in the treatment of anxiety. However, the ability of these interventions for engaging patients in "real-world" settings is unclear. Recently, smartphone apps for anxiety have presented a more popular and ubiquitous method of intervention delivery, although the evidence base supporting these newer approaches drastically falls behind the extensive marketing and commercialization efforts currently driving their development. Meanwhile, the increasing availability of novel technologies, such as "virtual reality" (VR), introduces further potential of e-health treatments for generalized anxiety and anxiety-related disorders such as phobias and obsessive compulsive disorder, while also creating additional challenges for research. Although still in its infancy, e-health research is already presenting several promising avenues for delivering effective and scalable treatments for anxiety. Nonetheless, several important steps must be taken in order for academic research to keep pace with continued technological advances.

  18. Direct sulfation of limestone based on oxy-fuel combustion technology

    Energy Technology Data Exchange (ETDEWEB)

    Chen, C.M.; Zhao, C.S.; Liu, S.T.; Wang, C.B. [North China Electric Power University, Baoding (China)

    2009-10-15

    With limestone as the sorbent, the sulfation reaction can proceed via two different routes depending on whether calcination of the limestone takes place under the given reaction conditions. The direct sulfation reaction is defined as the sulfation reaction between sulfur dioxide (SO{sub 2}) and limestone in an uncalcined state. This reaction, based on oxyfuel combustion technology, was studied by thermogravimetric analysis. Surface morphologies of the limestone particles after sulfation were examined by a scanning electron microscope. Results show that there are more pores or gaps in the product layer formed by direct sulfation of limestone than by indirect sulfation, which can be attributed to the generation of carbon dioxide (CO{sub 2}) at a reaction interface. Compared with indirect sulfation, direct sulfation of limestone can yield much higher conversion and has a much higher reaction rate. For direct sulfation, the greater porosity in the product layer greatly reduces the solid-state ion diffusion distance, resulting in a higher reaction rate and higher conversion.

  19. Process Design and Costing of Bioethanol Technology: A Tool for Determining the Status and Direction of Research and Development.

    Science.gov (United States)

    Wooley; Ruth; Glassner; Sheehan

    1999-10-01

    Bioethanol is a fuel-grade ethanol made from trees, grasses, and waste materials. It represents a sustainable substitute for gasoline in today's passenger cars. Modeling and design of processes for making bioethanol are critical tools used in the U.S. Department of Energy's bioethanol research and development program. We use such analysis to guide new directions for research and to help us understand the level at which and the time when bioethanol will achieve commercial success. This paper provides an update on our latest estimates for current and projected costs of bioethanol. These estimates are the result of very sophisticated modeling and costing efforts undertaken in the program over the past few years. Bioethanol could cost anywhere from $1.16 to $1.44 per gallon, depending on the technology and the availability of low cost feedstocks for conversion to ethanol. While this cost range opens the door to fuel blending opportunities, in which ethanol can be used, for example, to improve the octane rating of gasoline, it is not currently competitive with gasoline as a bulk fuel. Research strategies and goals described in this paper have been translated into cost savings for ethanol. Our analysis of these goals shows that the cost of ethanol could drop by 40 cents per gallon over the next ten years by taking advantage of exciting new tools in biotechnology that will improve yield and performance in the conversion process.

  20. A Possible Technology Development Path to Direct Imaging of Exo-Earths from Space

    Science.gov (United States)

    Siegler, Nicholas

    2018-01-01

    We describe a possible roadmap to achieving the technological capability to search for biosignatures on an Earth-like exoplanet from a future space telescope. The detection of Earth-like exoplanets in the habitable zone of their stars, and their spectroscopic characterization in a search for biosignatures, requires starlight suppression that exceeds the current best ground-based performance by orders of magnitude. The required planet/star brightness ratio of order 1e-10 at visible wavelengths can be obtained by blocking stellar photons with an occulter, either externally (a starshade) or internally (a coronagraph) to the telescope system, and managing diffracted starlight, so as to directly image the exoplanet in reflected starlight. Coronagraph instruments require advancement in telescope aperture (either monolithic or segmented), aperture obscurations (obscured by secondary mirror and its support struts), and wavefront error sensitivity (e.g. line-of-sight jitter, telescope vibration, polarization). The starshade, which has never been used in a science application, benefits a mission by being decoupled from the telescope, allowing a loosening of telescope stability requirements. In doing so, it transfers the difficult technology from the telescope system to a large deployable structure (tens of meters to greater than ~ 100 m in diameter) that must be positioned precisely at a distance of tens of thousands of kilometers from the telescope. Two ongoing mission concept studies, HabEx and LUVOIR, include the direct imaging of Earth-sized habitable exoplanets as a central science theme.

  1. Use of integrated technology in team sports: a review of opportunities, challenges, and future directions for athletes.

    Science.gov (United States)

    Dellaserra, Carla L; Gao, Yong; Ransdell, Lynda

    2014-02-01

    Integrated technology (IT), which includes accelerometers, global positioning systems (GPSs), and heart rate monitors, has been used frequently in public health. More recently, IT data have been used in sports settings to assess training and performance demands. However, the impact of IT in sports settings is yet to be evaluated, particularly in field-based team sports. This narrative-qualitative review provides an overview of the emerging impact of IT in sports settings. Twenty electronic databases (e.g., Medline, SPORTdiscus, and ScienceDirect), print publications (e.g., Signal Processing Magazine and Catapult Innovations news releases), and internet resources were searched using different combinations of keywords as follows: accelerometers, heart rate monitors, GPS, sport training, and field-based sports for relevant articles published from 1990 to the present. A total of 114 publications were identified, and 39 that examined a field-based team sport using a form of IT were analyzed. The articles chosen for analysis examined a field-based team sport using a form of IT. The uses of IT can be divided into 4 categories: (a) quantifying movement patterns (n = 22), (b) assessing the differences between demands of training and competition (n = 12), (c) measuring physiological and metabolic responses (n = 16), and (d) determining a valid definition for velocity and a sprint effort (n = 8). Most studies used elite adult male athletes as participants and analyzed the sports of Australian Rules football, field hockey, cricket, and soccer, with sample sizes between 5 and 20 participants. The limitations of IT in a sports setting include scalability issues, cost, and the inability to receive signals within indoor environments. Integrated technology can contribute to significant improvements in the preparation, training, and recovery aspects of field-based team sports. Future research should focus on using IT with female athlete populations and developing resources to use IT

  2. Direct chemical oxidation: a non-thermal technology for the destruction of organic wastes

    Energy Technology Data Exchange (ETDEWEB)

    Balazs, G.B.; Cooper, J. F.; Lewis, P. R.; Adamson, M. G.

    1998-02-01

    Direct Chemical Oxidation (DCO) is a non-thermal, ambient pressure, aqueous-based technology for the oxidative destruction of the organic components of hazardous or mixed waste streams. The process has been developed for applications in waste treatment and chemical demilitarization and decontamination at LLNL since 1992, and is applicable to the destruction of virtually all solid or liquid organics, including: chlorosolvents, oils and greases, detergents, organic-contaminated soils or sludges, explosives, chemical and biological warfare agents, and PCB's. [1-15] The process normally operates at 80-100 C, a heating requirement which increases the difficulty of surface decontamination of large objects or, for example, treatment of a wide area contaminated soil site. The driver for DCO work in FY98 was thus to investigate the use of catalysts to demonstrate the effectiveness of the technology for organics destruction at temperatures closer to ambient. In addition, DCO is at a sufficiently mature stage of development that technology transfer to a commercial entity was a logical next step, and was thus included in FY98 tasks.

  3. Food waste-to-energy conversion technologies: current status and future directions.

    Science.gov (United States)

    Pham, Thi Phuong Thuy; Kaushik, Rajni; Parshetti, Ganesh K; Mahmood, Russell; Balasubramanian, Rajasekhar

    2015-04-01

    Food waste represents a significantly fraction of municipal solid waste. Proper management and recycling of huge volumes of food waste are required to reduce its environmental burdens and to minimize risks to human health. Food waste is indeed an untapped resource with great potential for energy production. Utilization of food waste for energy conversion currently represents a challenge due to various reasons. These include its inherent heterogeneously variable compositions, high moisture contents and low calorific value, which constitute an impediment for the development of robust, large scale, and efficient industrial processes. Although a considerable amount of research has been carried out on the conversion of food waste to renewable energy, there is a lack of comprehensive and systematic reviews of the published literature. The present review synthesizes the current knowledge available in the use of technologies for food-waste-to-energy conversion involving biological (e.g. anaerobic digestion and fermentation), thermal and thermochemical technologies (e.g. incineration, pyrolysis, gasification and hydrothermal oxidation). The competitive advantages of these technologies as well as the challenges associated with them are discussed. In addition, the future directions for more effective utilization of food waste for renewable energy generation are suggested from an interdisciplinary perspective. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Experience with novel technologies for direct measurement of atmospheric NO2

    Science.gov (United States)

    Hueglin, Christoph; Hundt, Morten; Mueller, Michael; Schwarzenbach, Beat; Tuzson, Bela; Emmenegger, Lukas

    2017-04-01

    Nitrogen dioxide (NO2) is an air pollutant that has a large impact on human health and ecosystems, and it plays a key role in the formation of ozone and secondary particulate matter. Consequently, legal limit values for NO2 are set in the EU and elsewhere, and atmospheric observation networks typically include NO2 in their measurement programmes. Atmospheric NO2 is principally measured by chemiluminescence detection, an indirect measurement technique that requires conversion of NO2 into nitrogen monoxide (NO) and finally calculation of NO2 from the difference between total nitrogen oxides (NOx) and NO. Consequently, NO2 measurements with the chemiluminescence method have a relatively high measurement uncertainty and can be biased depending on the selectivity of the applied NO2 conversion method. In the past years, technologies for direct and selective measurement of NO2 have become available, e.g. cavity attenuated phase shift spectroscopy (CAPS), cavity enhanced laser absorption spectroscopy and quantum cascade laser absorption spectrometry (QCLAS). These technologies offer clear advantages over the indirect chemiluminescence method. We tested the above mentioned direct measurement techniques for NO2 over extended time periods at atmospheric measurement stations and report on our experience including comparisons with co-located chemiluminescence instruments equipped with molybdenum as well as photolytic NO2 converters. A still open issue related to the direct measurement of NO2 is instrument calibration. Accurate and traceable reference standards and NO2 calibration gases are needed. We present results from the application of different calibration strategies based on the use of static NO2 calibration gases as well as dynamic NO2 calibration gases produced by permeation and by gas-phase titration (GPT).

  5. Real-time positioning technology in horizontal directional drilling based on magnetic gradient tensor measurement

    Science.gov (United States)

    Deng, Guoqing; Yao, Aiguo

    2017-04-01

    Horizontal directional drilling (HDD) technology has been widely used in Civil Engineering. The dynamic position of the drill bit during construction is one of significant facts determining the accuracy of the trajectory of HDD. A new method now has been proposed to detecting the position of drill bit by measuring the magnetic gradient tensor of the ground solenoid magnetic beacon. Compared with traditional HDD positioning technologies, this new model is much easier to apply with lower request for construction sites and higher positioning efficiency. A direct current (DC) solenoid as a magnetic dipole is placed on ground near the drill bit, and related sensors array which contains four Micro-electromechanical Systems (MEMS ) tri-axial magnetometers, one MEMS tri-axial accelerometer and one MEMS tri-axial gyroscope is set up for measuring the magnetic gradient tensor of the magnetic dipole. The related HDD positioning model has been established and simulation experiments have been carried out to verify the feasibility and reliability of the proposed method. The experiments show that this method has good positioning accuracy in horizontal and vertical direction, and totally avoid the impact of the environmental magnetic field. It can be found that the posture of the magnetic beacon will impact the remote positioning precision within valid positioning range, and the positioning accuracy is higher with longer baseline for limited space in drilling tools. The results prove that the relative error can be limited in 2% by adjusting position of the magnetic beacon, the layers of the enameled coil, the sensitive of magnetometers and the baseline distance. Conclusion can be made that this new method can be applied in HDD positioning with better effect and wider application range than traditional method.

  6. Contradictory directionalities of digital learning technology and its implications for the scope of imaginable possibilities for collaborating

    DEFF Research Database (Denmark)

    Chimirri, Niklas Alexander

    Contradictory learning directionalities are immanent to digital learning technology: Any technology suggests a limited multiplicity of situated uses in a learning practice, of understandings of how to learn and of what learning should be about. Herewith any technology offers a scope of imaginable...... possibilities for acting through it. Sociomaterially maintained learning directionalities – among others through the intended uses of learning technology in educational arrangements – afford the enactment of a delimited ensemble of experiential modes, sensualities, epistemologies, knowledges, and future hopes....... Next to offering opportunities to expand the learners’ scope of possibilities for transforming these learning directionalities together, digital learning technology thus also promotes the taken for grantedness of particular understandings of (most often instrumental) learning. They may consequently...

  7. Directed technical change and the adoption of CO2 abatement technology. The case of CO2 capture and storage

    International Nuclear Information System (INIS)

    Otto, Vincent M.; Reilly, John

    2008-01-01

    This paper studies the cost-effectiveness of combining traditional environmental policy, such as CO 2 -trading schemes, and technology policy that has aims of reducing the cost and speeding the adoption of CO 2 abatement technology. For this purpose, we develop a dynamic general equilibrium model that captures empirical links between CO 2 emissions associated with energy use, directed technical change and the economy. We specify CO 2 capture and storage (CCS) as a discrete CO 2 abatement technology. We find that combining CO 2 -trading schemes with an adoption subsidy is the most effective instrument to induce adoption of the CCS technology. Such a subsidy directly improves the competitiveness of the CCS technology by compensating for its markup over the cost of conventional electricity. Yet, introducing R and D subsidies throughout the entire economy leads to faster adoption of the CCS technology as well and in addition can be cost-effective in achieving the abatement target. (author)

  8. Enhancing Learners' Self-Directed Use of Technology for Language Learning: The Effectiveness of an Online Training Platform

    Science.gov (United States)

    Lai, Chun; Shum, Mark; Tian, Yan

    2016-01-01

    Enhancing self-directed use of technology for language learning is essential for maximizing the potential of technology for language learning. Understanding how to construct learner training to promote this critical competency is of great significance. This study examined the effectiveness of an online training platform aimed at enhancing the…

  9. Developing technology-enhanced active learning for medical education: challenges, solutions, and future directions.

    Science.gov (United States)

    McCoy, Lise; Pettit, Robin K; Lewis, Joy H; Bennett, Thomas; Carrasco, Noel; Brysacz, Stanley; Makin, Inder Raj S; Hutman, Ryan; Schwartz, Frederic N

    2015-04-01

    Growing up in an era of video games and Web-based applications has primed current medical students to expect rapid, interactive feedback. To address this need, the A.T. Still University-School of Osteopathic Medicine in Arizona (Mesa) has developed and integrated a variety of approaches using technology-enhanced active learning for medical education (TEAL-MEd) into its curriculum. Over the course of 3 years (2010-2013), the authors facilitated more than 80 implementations of games and virtual patient simulations into the education of 550 osteopathic medical students. The authors report on 4 key aspects of the TEAL-MEd initiative, including purpose, portfolio of tools, progress to date regarding challenges and solutions, and future directions. Lessons learned may be of benefit to medical educators at academic and clinical training sites who wish to implement TEAL-MEd activities.

  10. Material challenges for solar cells in the twenty-first century: directions in emerging technologies

    Science.gov (United States)

    Delamarre, Amaury; Jehl, Zacharie; Suchet, Daniel; Cojocaru, Ludmila; Giteau, Maxime; Behaghel, Benoit; Julian, Anatole; Ibrahim, Camille; Tatry, Léa; Wang, Haibin; Kubo, Takaya; Uchida, Satoshi; Segawa, Hiroshi; Miyashita, Naoya; Tamaki, Ryo; Shoji, Yasushi; Yoshida, Katsuhisa; Ahsan, Nazmul; Watanabe, Kentaro; Inoue, Tomoyuki; Sugiyama, Masakazu; Nakano, Yoshiaki; Hamamura, Tomofumi; Toupance, Thierry; Olivier, Céline; Chambon, Sylvain; Vignau, Laurence; Geffroy, Camille; Cloutet, Eric; Hadziioannou, Georges; Cavassilas, Nicolas; Rale, Pierre; Cattoni, Andrea; Collin, Stéphane; Gibelli, François; Paire, Myriam; Lombez, Laurent; Aureau, Damien; Bouttemy, Muriel; Etcheberry, Arnaud; Okada, Yoshitaka

    2018-01-01

    Abstract Photovoltaic generation has stepped up within the last decade from outsider status to one of the important contributors of the ongoing energy transition, with about 1.7% of world electricity provided by solar cells. Progress in materials and production processes has played an important part in this development. Yet, there are many challenges before photovoltaics could provide clean, abundant, and cheap energy. Here, we review this research direction, with a focus on the results obtained within a Japan–French cooperation program, NextPV, working on promising solar cell technologies. The cooperation was focused on efficient photovoltaic devices, such as multijunction, ultrathin, intermediate band, and hot-carrier solar cells, and on printable solar cell materials such as colloidal quantum dots. PMID:29707072

  11. An ultra-high-speed direct digital frequency synthesizer implemented in GaAs HBT technology

    International Nuclear Information System (INIS)

    Chen Gaopeng; Wu Danyu; Jin Zhi; Liu Xinyu

    2010-01-01

    This paper presents a 10-GHz 8-bit direct digital synthesizer (DDS) microwave monolithic integrated circuit implemented in 1 μm GaAs HBT technology. The DDS takes a double-edge-trigger (DET) 8-stage pipeline accumulator with sine-weighted DAC-based ROM-less architecture, which can maximize the utilization ratio of the GaAs HBT's high-speed potential. With an output frequency up to 5 GHz, the DDS gives an average spurious free dynamic range of 23.24 dBc through the first Nyquist band, and consumes 2.4 W of DC power from a single -4.6 V DC supply. Using 1651 GaAs HBT transistors, the total area of the DDS chip is 2.4 x 2.0 mm 2 . (semiconductor integrated circuits)

  12. Material challenges for solar cells in the twenty-first century: directions in emerging technologies.

    Science.gov (United States)

    Almosni, Samy; Delamarre, Amaury; Jehl, Zacharie; Suchet, Daniel; Cojocaru, Ludmila; Giteau, Maxime; Behaghel, Benoit; Julian, Anatole; Ibrahim, Camille; Tatry, Léa; Wang, Haibin; Kubo, Takaya; Uchida, Satoshi; Segawa, Hiroshi; Miyashita, Naoya; Tamaki, Ryo; Shoji, Yasushi; Yoshida, Katsuhisa; Ahsan, Nazmul; Watanabe, Kentaro; Inoue, Tomoyuki; Sugiyama, Masakazu; Nakano, Yoshiaki; Hamamura, Tomofumi; Toupance, Thierry; Olivier, Céline; Chambon, Sylvain; Vignau, Laurence; Geffroy, Camille; Cloutet, Eric; Hadziioannou, Georges; Cavassilas, Nicolas; Rale, Pierre; Cattoni, Andrea; Collin, Stéphane; Gibelli, François; Paire, Myriam; Lombez, Laurent; Aureau, Damien; Bouttemy, Muriel; Etcheberry, Arnaud; Okada, Yoshitaka; Guillemoles, Jean-François

    2018-01-01

    Photovoltaic generation has stepped up within the last decade from outsider status to one of the important contributors of the ongoing energy transition, with about 1.7% of world electricity provided by solar cells. Progress in materials and production processes has played an important part in this development. Yet, there are many challenges before photovoltaics could provide clean, abundant, and cheap energy. Here, we review this research direction, with a focus on the results obtained within a Japan-French cooperation program, NextPV, working on promising solar cell technologies. The cooperation was focused on efficient photovoltaic devices, such as multijunction, ultrathin, intermediate band, and hot-carrier solar cells, and on printable solar cell materials such as colloidal quantum dots.

  13. Membrane-based processes for wastewater nutrient recovery: Technology, challenges, and future direction.

    Science.gov (United States)

    Xie, Ming; Shon, Ho Kyong; Gray, Stephen R; Elimelech, Menachem

    2016-02-01

    Wastewater nutrient recovery holds promise for more sustainable water and agricultural industries. We critically review three emerging membrane processes - forward osmosis (FO), membrane distillation (MD) and electrodialysis (ED) - that can advance wastewater nutrient recovery. Challenges associated with wastewater nutrient recovery were identified. The advantages and challenges of applying FO, MD, and ED technologies to wastewater nutrient recovery are discussed, and directions for future research and development are identified. Emphasis is given to exploration of the unique mass transfer properties of these membrane processes in the context of wastewater nutrient recovery. We highlight that hybridising these membrane processes with existing nutrient precipitation process will lead to better management of and more diverse pathways for near complete nutrient recovery in wastewater treatment facilities. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Environmental Regulation, Foreign Direct Investment and Green Technological Progress—Evidence from Chinese Manufacturing Industries

    Science.gov (United States)

    Hu, Jiangfeng; Wang, Zhao; Lian, Yuehan; Huang, Qinghua

    2018-01-01

    This study examines the spillover effects of foreign direct investment (FDI) on green technology progress rate (as measured by the green total factor productivity). The analysis utilizes two measures of FDI, labor-based FDI and capital-based FDI, and separately investigates four sets of industry classifications—high/low discharge regulation and high/low emission standard regulation. The results indicate that in the low discharge regulation and low emission standard regulation industry, labor-based FDI has a significant negative spillover effect, and capital-based FDI has a significant positive spillover effect. However, in the high-intensity environmental regulation industry, the negative influence of labor-based FDI is completely restrained, and capital-based FDI continues to play a significant positive green technological spillover effects. These findings have clear policy implications: the government should be gradually reducing the labor-based FDI inflow or increasing stringency of environmental regulation in order to reduce or eliminate the negative spillover effect of the labor-based FDI. PMID:29382112

  15. Environmental Regulation, Foreign Direct Investment and Green Technological Progress—Evidence from Chinese Manufacturing Industries

    Directory of Open Access Journals (Sweden)

    Jiangfeng Hu

    2018-01-01

    Full Text Available This study examines the spillover effects of foreign direct investment (FDI on green technology progress rate (as measured by the green total factor productivity. The analysis utilizes two measures of FDI, labor-based FDI and capital-based FDI, and separately investigates four sets of industry classifications—high/low discharge regulation and high/low emission standard regulation. The results indicate that in the low discharge regulation and low emission standard regulation industry, labor-based FDI has a significant negative spillover effect, and capital-based FDI has a significant positive spillover effect. However, in the high-intensity environmental regulation industry, the negative influence of labor-based FDI is completely restrained, and capital-based FDI continues to play a significant positive green technological spillover effects. These findings have clear policy implications: the government should be gradually reducing the labor-based FDI inflow or increasing stringency of environmental regulation in order to reduce or eliminate the negative spillover effect of the labor-based FDI.

  16. Environmental Regulation, Foreign Direct Investment and Green Technological Progress-Evidence from Chinese Manufacturing Industries.

    Science.gov (United States)

    Hu, Jiangfeng; Wang, Zhao; Lian, Yuehan; Huang, Qinghua

    2018-01-29

    This study examines the spillover effects of foreign direct investment (FDI) on green technology progress rate (as measured by the green total factor productivity). The analysis utilizes two measures of FDI, labor-based FDI and capital-based FDI, and separately investigates four sets of industry classifications-high/low discharge regulation and high/low emission standard regulation. The results indicate that in the low discharge regulation and low emission standard regulation industry, labor-based FDI has a significant negative spillover effect, and capital-based FDI has a significant positive spillover effect. However, in the high-intensity environmental regulation industry, the negative influence of labor-based FDI is completely restrained, and capital-based FDI continues to play a significant positive green technological spillover effects. These findings have clear policy implications: the government should be gradually reducing the labor-based FDI inflow or increasing stringency of environmental regulation in order to reduce or eliminate the negative spillover effect of the labor-based FDI.

  17. Desalination and reuse of high-salinity shale gas produced water: drivers, technologies, and future directions.

    Science.gov (United States)

    Shaffer, Devin L; Arias Chavez, Laura H; Ben-Sasson, Moshe; Romero-Vargas Castrillón, Santiago; Yip, Ngai Yin; Elimelech, Menachem

    2013-09-03

    In the rapidly developing shale gas industry, managing produced water is a major challenge for maintaining the profitability of shale gas extraction while protecting public health and the environment. We review the current state of practice for produced water management across the United States and discuss the interrelated regulatory, infrastructure, and economic drivers for produced water reuse. Within this framework, we examine the Marcellus shale play, a region in the eastern United States where produced water is currently reused without desalination. In the Marcellus region, and in other shale plays worldwide with similar constraints, contraction of current reuse opportunities within the shale gas industry and growing restrictions on produced water disposal will provide strong incentives for produced water desalination for reuse outside the industry. The most challenging scenarios for the selection of desalination for reuse over other management strategies will be those involving high-salinity produced water, which must be desalinated with thermal separation processes. We explore desalination technologies for treatment of high-salinity shale gas produced water, and we critically review mechanical vapor compression (MVC), membrane distillation (MD), and forward osmosis (FO) as the technologies best suited for desalination of high-salinity produced water for reuse outside the shale gas industry. The advantages and challenges of applying MVC, MD, and FO technologies to produced water desalination are discussed, and directions for future research and development are identified. We find that desalination for reuse of produced water is technically feasible and can be economically relevant. However, because produced water management is primarily an economic decision, expanding desalination for reuse is dependent on process and material improvements to reduce capital and operating costs.

  18. Recent advances in severe accident technology - direct containment heating in advanced light water reactors

    International Nuclear Information System (INIS)

    Fontana, M.H.

    1993-01-01

    The issues affecting high-pressure melt ejection (HPME) and the consequential containment pressurization from direct containment heating (DCH), as they affect advanced light water reactors (ALWRs), specifically advanced pressurized water reactors (APWRs), were reviewed by the U.S. Department of Energy Advanced Reactor Severe Accident Program (ARSAP). Recommendations from ARSAP regarding the design of APWRs to minimize DCH are embodied within the Electric Power Research Institute ALWR Utility Requirements Document, which specifies (a) a large, strong containment; (b) an in-containment refueling water storage tank; (c) a reactor cavity configuration that minimizes energy transport to the containment atmosphere; and (d) a reactor coolant system depressurization system. Experimental and analytical efforts, which have focused on current-generation plants, and analyses for APWRs were reviewed. Although DCH is a subject of continuous research and considerable uncertainties remain, it is the judgment of the ARSAP that reactors complying with the recommended design requirements would have a low probability of early containment failure due to HPME and DCH

  19. A case for the expansion of effort and the adoption of a modified approach in Australia to education and research on the engineering and technology of nuclear power

    International Nuclear Information System (INIS)

    Ford, G.W.K.

    1981-11-01

    A positive initiative needs to be taken to place more emphasis on undergraduate education in the field of nuclear engineering in Australia. Excellent facilities exist at the AAEC to aid tertiary institutions. Many excellent opportunities also exist for developing post-graduate research projects in nuclear technology

  20. Direct printing of miniscule aluminum alloy droplets and 3D structures by StarJet technology

    Science.gov (United States)

    Gerdes, B.; Zengerle, R.; Koltay, P.; Riegger, L.

    2018-07-01

    Drop-on demand printing of molten metal droplets could be used for prototyping 3D objects as a promising alternative to laser melting technologies. However, to date, only few printheads have been investigated for this purpose, and they used only a limited range of materials. The pneumatically actuated StarJet technology enables the direct and non-contact printing of molten metal microdroplets from metal melts at high temperatures. StarJet printheads utilize nozzle chips featuring a star-shaped orifice geometry that leads to formation of droplets inside the nozzle with high precision. In this paper, we present a novel StarJet printhead for printing aluminum (Al) alloys featuring a hybrid design with a ceramic reservoir for the molten metal and an outer shell fabricated from stainless steel. The micro machined nozzle chip is made from silicon carbide (SiC). This printhead can be operated at up to 950 °C, and is capable of printing high melting point metals like Al alloys in standard laboratory conditions. In this work, an aluminum–silicon alloy that features 12% silicon (AlSi12) is printed. The printhead, nozzle, and peripheral actuation system are optimized for stable generation of AlSi12 droplets with high monodispersity, low angular deviation, and miniaturized droplet diameters. As a result, a stable drop-on-demand printing of droplets exhibiting diameters of d droplet  =  702 µm  ±  1% is demonstrated at 5 Hz with a low angular deviation of 0.3°, when a nozzle chip with 500 µm orifice diameter is used. Furthermore, AlSi12 droplets featuring d droplet  =  176 µm  ±  7% are printed when using a nozzle chip with an orifice diameter of 130 µm. Moreover, we present directly printed objects from molten Al alloy droplets, such as high aspect ratio, free-standing walls (aspect ratio 12:1), and directly printed, flexible springs, to demonstrate the principle of 3D printing with molten metal droplets.

  1. Comparison of Heat Transfer Fluid and Direct Steam Generation technologies for Integrated Solar Combined Cycles

    International Nuclear Information System (INIS)

    Rovira, Antonio; Montes, María José; Varela, Fernando; Gil, Mónica

    2013-01-01

    At present time and in the medium term, Solar Thermal Power Plants are going to share scenario with conventional energy generation technologies, like fossil and nuclear. In such a context, Integrated Solar Combined Cycles (ISCCs) may be an interesting choice since integrated designs may lead to a very efficient use of the solar and fossil resources. In this work, different ISCC configurations including a solar field based on parabolic trough collectors and working with the so-called Heat Transfer Fluid (HTF) and Direct Steam Generation (DSG) technologies are compared. For each technology, four layouts have been studied: one in which solar heat is used to evaporate part of the high pressure steam of a bottoming Rankine cycle with two pressure levels, another that incorporates a preheating section to the previous layout, the third one that includes superheating instead of preheating and the last one including both preheating and superheating in addition to the evaporation. The analysis is made with the aim of finding out which of the different layouts reaches the best performance. For that purpose, three types of comparisons have been performed. The first one assesses the benefits of including a solar steam production fixed at 50 MW th . The second one compares the configurations with a standardised solar field size instead of a fixed solar steam production. Finally, the last one consists on an even more homogeneous comparison considering the same steam generator size for all the configurations as well as standardised solar fields. The configurations are studied by mean of exergy analyses. Several figures of merit are used to correctly assess the configurations. Results reveal that the only-evaporative DSG configuration becomes the best choice, since it benefits of both low irreversibility at the heat recovery steam generator and high thermal efficiency in the solar field. Highlights: ► ISCC configurations with DSG and HTF technologies are compared. ► Four

  2. Emplacement technology for the direct disposal of spent fuel into deep vertical boreholes

    International Nuclear Information System (INIS)

    Bollingerfehr, W.; Filbert, W.; Wehrmann, J.

    2008-01-01

    diameter provides the possibility to apply a comm on transfer and handling technique for both categories. (III) The BSK3-canister is tightly closed by welding and designed to withstand the petrostatic pressure at the emplacement level. (iv) The residual heat generation of a canister loaded with fuel rods burned up to 50 GWd/tHM will enable it's emplacement in a salt repository already after about 3 to 7 years following reactor unloading of the fuel assemblies. This has been evidenced by thermal calculations. The BSK 3-concept, therefore, may provide a considerable reduction of necessary effort in terms of time and costs. Consequently a research program was launched to develop and test the necessary technical components and to transfer this emplacement technology into a new state of the art. The R and D work is going to be performed as a part of the 6th Framework program of the European Union. The BSK 3 concept there is an essential element of an Integrated Project, which is dealing with the development and demonstration of repository relevant transport and emplacement techniques. The IP ESDRED will be performed by a consortium of 13 partners from 9 European countries. Financial support is provided by waste management agencies and by the European Commission. The activities performed by DBE TECHNOLOGY GmbH are co financed by the German Project Management Agency Karlsruhe and the manufacturing of the components by the German nuclear industry represented by GNS. To develop the BSK 3 emplacement technology to technical maturity it was decided to carry out a comprehensive series of demonstrations tests in a 1:1 scale. The target of these tests are to prove the feasibility and safety of the technical system and it's different components. In addition, the results of these tests should provide all information required for licensing this new back end technology, satisfying the legal requirements for a German final repository. The main components are: a BSK 3 canister, containing

  3. Enteric methane mitigation technologies for ruminant livestock: a synthesis of current research and future directions.

    Science.gov (United States)

    Patra, Amlan Kumar

    2012-04-01

    Enteric methane (CH(4)) emission in ruminants, which is produced via fermentation of feeds in the rumen and lower digestive tract by methanogenic archaea, represents a loss of 2% to 12% of gross energy of feeds and contributes to global greenhouse effects. Globally, about 80 million tonnes of CH(4) is produced annually from enteric fermentation mainly from ruminants. Therefore, CH(4) mitigation strategies in ruminants have focused to obtain economic as well as environmental benefits. Some mitigation options such as chemical inhibitors, defaunation, and ionophores inhibit methanogenesis directly or indirectly in the rumen, but they have not confirmed consistent effects for practical use. A variety of nutritional amendments such as increasing the amount of grains, inclusion of some leguminous forages containing condensed tannins and ionophore compounds in diets, supplementation of low-quality roughages with protein and readily fermentable carbohydrates, and addition of fats show promise for CH(4) mitigation. These nutritional amendments also increase the efficiency of feed utilization and, therefore, are most likely to be adopted by farmers. Several new potential technologies such as use of plant secondary metabolites, probiotics and propionate enhancers, stimulation of acetogens, immunization, CH(4) oxidation by methylotrophs, and genetic selection of low CH(4)-producing animals have emerged to decrease CH(4) production, but these require extensive research before they can be recommended to livestock producers. The use of bacteriocins, bacteriophages, and development of recombinant vaccines targeting archaeal-specific genes and cell surface proteins may be areas worthy of investigation for CH(4) mitigation as well. A combination of different CH(4) mitigation strategies should be adopted in farm levels to substantially decrease methane emission from ruminants. Evidently, comprehensive research is needed to explore proven and reliable CH(4) mitigation technologies

  4. Assessment of unsaturated zone transport for shallow land burial of radioactive waste: summary report of technology needs, model verification, and measurement efforts (FY 1978 to FY 1983)

    International Nuclear Information System (INIS)

    Jones, T.L.; Gee, G.W.

    1984-01-01

    Two main topics are addressed in this report. The first topic relates to the assessment process for shallow land burial site design. This overview includes basic descriptions of water balance, transport processes and technology needs for waste management at an arid (dry) site. The second topic deals with specific results of research activities at PNL related to water and radionuclide transport under arid, shallow land burial conditions. Technology needs at arid-zone (dry) sites are summarized and unique features of radionuclide disposal at dry sites are explained. The report emphasizes the need to understand the interaction between climate, soil, plants, engineered barriers, and buried waste in order to evaluate performance of a waste disposal system at a dry site. Water balance data, collected since FY 1978 at the Buried Waste Test Facility (BWTF) at Hanford, are used to illustrate the influence of climate variables (rainfall distribution patterns and evaporative conditions) on soil water storage and drainage at an arid site. For dry site conditions, with no vegetation and coarse soil, significant deep drainage was measured. Deep drainage below the root zone was also measured at a grass-covered site on the Hanford site after early spring rains, which emphasizes the need to carefully monitor site water balances even at arid (dry) sites. The monitoring technology, water balance, and radionuclide transport at arid sites are discussed, and the use of neutron probes, electrical resistance units, tensiometers, and psychrometers are explained, and examples are given on their applications in arid-site monitoring. Measurements of water flow and radionuclide transport coefficients needed to describe movement in unsaturated soils are documented. 40 references, 21 figures, 5 tables

  5. Next generation DIRCM for 2.1-2.3 micron wavelength based on direct-diode GaSb technology

    Science.gov (United States)

    Dvinelis, Edgaras; Naujokaitė, Greta; Greibus, Mindaugas; Trinkūnas, Augustinas; Vizbaras, Kristijonas; Vizbaras, Augustinas

    2018-02-01

    Continuous advances in low-cost MANPAD heat-seeking missile technology over the past 50 years remains the number one hostile threat to airborne platforms globally responsible for over 60 % of casualties. Laser based directional countermeasure (DIRCM) technology have been deployed to counter the threat. Ideally, a laser based DIRCM system must involve a number of lasers emitting at different spectral bands mimicking the spectral signature of the airborne platform. Up to now, near and mid infrared spectral bands have been covered with semiconductor laser technology and only SWIR band remained with bulky fiber laser technology. Recent technology developments on direct-diode GaSb laser technology at Brolis Semiconductors offer a replacement for the fiber laser source leading to significant improvements by few orders of magnitude in weight, footprint, efficiency and cost. We demonstrate that with careful engineering, several multimode emitters can be combined to provide a directional laser beam with radiant intensity from 10 kW/sr to 60 kW/sr in an ultra-compact hermetic package with weight < 30 g and overall efficiency of 15 % in the 2.1- 2.3 micron spectral band offering 150 times improvement in efficiency and reduction in footprint. We will discuss present results, challenges and future developments for such next-generation integrated direct diode DIRCM modules for SWIR band.

  6. Use of nuclear space technology of direct energy conversion for terrestrial application

    International Nuclear Information System (INIS)

    Chitaykin, V.I.; Meleta, Ye.A.; Yarygin, V.I.; Mikheyev, A.S.; Tulin, S.M.

    2000-01-01

    In due time the SSC RF-IPPE exercised the scientific supervision and directly participated in the development, fabrication, space flight test and maintenance of the direct energy conversion nuclear power plants (NPP) for space application under the 'BUK' and 'TOPAZ' programs. We have used the acquired experience and the high technologies developed for the 'BUK' NPP with a thermoelectric conversion of thermal (nuclear) energy into electrical one in the development under the order of RAO 'GAZPROM' of the natural gas fired self contained thermoelectric current sources (AIT-500) and heat and electricity sources (TEP-500). These are intended for electrochemical rust protection of gas pipelines and for the electricity and heat supply to the telemetric and microwave-link systems located along the gas pipelines. Of special interest at the moment are the new developments of self contained current sources with the electrical output of ∼500 Wel for new gas pipelines being constructed under the projects such as the 'Yamal-Europe' project. The electrochemical rust protection of gas pipelines laying on unsettled and non-electrified territory of arctic regions of Russia is performed by means of the so-called Cathodic Protection Stations (CPS). Accounting for a complex of rather rigid requirements imposed by arctic operating conditions, the most attractive sources of electricity supply to the CPS are the thermoelectric heat-into-electricity converters and the generators (TEG). This paper deals with the essential results of the development, investigation and testing of unconventional TEGs using the low-temperature bismuth-tellurium thermoelectric batteries assembled together as tubular thermoelectric batteries with a radial ring geometry built into the gas-heated thermoelectric modules, which are collected to make up either the thermoelectric plants for heat and electricity supply or the self contained power sources. One of the peculiarities of these plants is the combination of

  7. Ka-band Technologies for Small Spacecraft Communications via Relays and Direct Data Downlink

    Science.gov (United States)

    Budinger, James M.; Niederhaus, Charles; Reinhart, Richard; Downey, Joe; Roberts, Anthony

    2016-01-01

    As the scientific capabilities and number of small spacecraft missions in the near Earth region increase, standard yet configurable user spacecraft terminals operating in Ka-band are needed to lower mission cost and risk and enable significantly higher data return than current UHF or S-band terminals. These compact Ka-band terminals are intended to operate with both the current and next generation of Ka-band relay satellites and via direct data communications with near Earth tracking terminals. This presentation provides an overview of emerging NASA-sponsored and commercially provided technologies in software defined radios (SDRs), transceivers, and electronically steered antennas that will enable data rates from hundreds of kbps to over 1 Gbps and operate in multiple frequency bands (such as S- and X-bands) and expand the use of NASA's common Ka-bands frequencies: 22.55-23.15 GHz for forward data or uplink; and 25.5-27.0 GHz for return data or downlink. Reductions in mass, power and volume come from integration of multiple radio functions, operations in Ka-band, high efficiency amplifiers and receivers, and compact, flat and vibration free electronically steered narrow beam antennas for up to + 60 degrees field of regard. The software defined near Earth space transceiver (SD-NEST) described in the presentation is intended to be compliant with NASA's space telecommunications radio system (STRS) standard for communications waveforms and hardware interoperability.

  8. High-voltage direct current (HVDC) transmission - a key technology for our power supply

    International Nuclear Information System (INIS)

    Dorn, J.

    2016-01-01

    The phasing-out of nuclear power in some countries and the aspirations of reducing carbon dioxide emissions have far-reaching implications for electric power generation in Europe. In the future, renewable electricity generation will account for a considerable share of the energy mix, but this type of production is often far from the load centers. In Germany, for example, large quantities of wind energy are already generated in the north and in the North Sea, but large load centers are located several hundred kilometers south of there. This requires an expansion of the transmission network with innovative solutions. High-voltage direct-current (HVDC) transmission plays an important role, since it brings a number of advantages over conventional AC technology and makes certain requirements feasible, for example Cable transmission over longer distances. The lecture presents the advantages of HVDC, the semiconductors used as well as the basic functions and typical performance of the used converter topopologies. The plant configurations and main components are illustrated using current projects. (rössner) [de

  9. Influence of University Level Direct Instruction on Educators' Use of Technology in the Classroom

    Science.gov (United States)

    Garner, Angie M.; Bonds-Raacke, Jennifer M.

    2013-01-01

    Previous research regarding technology integration in education has indicated that when technology is integrated into the classroom with fidelity it can enhance educational experiences. Research has also indicated, however that despite the growing presence of technology in classrooms, it is not being effectively utilized. The present study…

  10. Directions of innovative educational technologies implemented in formation of the students’ competences

    Directory of Open Access Journals (Sweden)

    Barabas Dmytro Oleksandrovych

    2017-10-01

    Full Text Available The article summarizes important competences for the modern specialist. It characterises prior directions in introduction of innovative methods of training at universities. These directions are linked to the core competences of students each direction allows to form. The tools for implementing these directions are specified in the article.

  11. Seven Years after the Manifesto: Literature Review and Research Directions for Technologies in Animal Computer Interaction

    Directory of Open Access Journals (Sweden)

    Ilyena Hirskyj-Douglas

    2018-06-01

    Full Text Available As technologies diversify and become embedded in everyday lives, the technologies we expose to animals, and the new technologies being developed for animals within the field of Animal Computer Interaction (ACI are increasing. As we approach seven years since the ACI manifesto, which grounded the field within Human Computer Interaction and Computer Science, this thematic literature review looks at the technologies developed for (non-human animals. Technologies that are analysed include tangible and physical, haptic and wearable, olfactory, screen technology and tracking systems. The conversation explores what exactly ACI is whilst questioning what it means to be animal by considering the impact and loop between machine and animal interactivity. The findings of this review are expected to form the first grounding foundation of ACI technologies informing future research in animal computing as well as suggesting future areas for exploration.

  12. A Pilot Health Information Technology-Based Effort to Increase the Quality of Transitions From Skilled Nursing Facility to Home: Compelling Evidence of High Rate of Adverse Outcomes.

    Science.gov (United States)

    Donovan, Jennifer L; Kanaan, Abir O; Gurwitz, Jerry H; Tjia, Jennifer; Cutrona, Sarah L; Garber, Lawrence; Preusse, Peggy; Field, Terry S

    2016-04-01

    Older adults are often transferred from hospitals to skilled nursing facilities (SNFs) for post-acute care. Patients may be at risk for adverse outcomes after SNF discharges, but little research has focused on this period. Assessment of the feasibility of a transitional care intervention based on a combination of manual information transmission and health information technology to provide automated alert messages to primary care physicians and staff; pre-post analysis to assess potential impact. A multispecialty group practice. Adults aged 65 and older, discharged from SNFs to home; comparison group drawn from SNF discharges during the previous 1.5 years, matched on facility, patient age, and sex. For the pre-post analysis, we tracked rehospitalization within 30 days after discharge and adverse drug events within 45 days. The intervention was developed and implemented with manual transmission of information between 8 SNFs and the group practice followed by entry into the electronic health record. The process required a 5-day delay during which a large portion of the adverse events occurred. Over a 1-year period, automated alert messages were delivered to physicians and staff for the 313 eligible patients discharged from the 8 SNFs to home. We compared outcomes to those of individually matched discharges from the previous 1.5 years and found similar percentages with 30-day rehospitalizations (31% vs 30%, adjusted HR 1.06, 95% CI 0.80-1.4). Within the adverse drug event (ADE) study, 30% of the discharges during the intervention period and 30% of matched discharges had ADEs within 45 days. Older adults discharged from SNFs are at high risk of adverse outcomes immediately following discharge. Simply providing alerts to outpatient physicians, especially if delivered multiple days after discharge, is unlikely to have any impact on reducing these rates. Copyright © 2016 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All

  13. Technology-assisted Interventions for Parents of Young Children: Emerging Practices, Current Research, and Future Directions.

    Science.gov (United States)

    Hall, Cristin M; Bierman, Karen L

    Technology can potentially expand the reach and cut the costs of providing effective, evidence-based interventions. This paper reviews existing publications that describe the application and evaluation of technology-assisted interventions for parents of young children. A broad review of the early childhood literature revealed 48 studies describing technology-assisted parent education and interventions. Across these studies, multiple forms of technology were used, including web-based platforms, discussion forums, mobile devices, and video conferencing. Results are described moving from feasibility and acceptability of technology-based delivery systems to more rigorous evaluations examining their impact on parent and child outcomes. Potential exists for technology to deliver interventions to parents. Limitations are discussed including differential acceptability and elevated attrition associated with internet-only intervention delivery.

  14. Direct effect of ownership and technology import: Firm level evidence from large and medium-enterprises in Shanghai

    Institute of Scientific and Technical Information of China (English)

    ZHU Pingfang; LI Lei

    2007-01-01

    This paper explores the direct effect of ownership and technology imports under the fiamework of neoclassical economic theory.The econometric analysis is based on panel data from a random sample of large and mediumenterprises in Shanghai,during the period of 1998 to 2003.The results show that Sino-foreign joint ventures,Sino-foralgn cooperative enterprises and foreignfunded enterprises (SANZI) enjoy higher labor productivity and total factor productlvity (TFP) than domestic enterprises.Intra-firm diffusion of non-codified technology,proxied by ovwnership,is the main source of their better performance,whereas internally transferred codified technology makes little contribution to TFP.For state-owned enterprises,codified technology imports have significantly raised both labor productivity and TFP,but such positive effect is significantly dependent on the S&T human resource.In contrast,no evidence supports that introduction of foreign technology has enhanced the productivity in domestic nonstate-owned enterprises.The empirical results indicate that SANZI do not have a distinct advantage in their codified technology.In addition,inadequate investment in assimilation process and research and development together with inefficient management of science and technology activities,may impede the use of imported technology.

  15. Estimation of inspection effort

    International Nuclear Information System (INIS)

    Mullen, M.F.; Wincek, M.A.

    1979-06-01

    An overview of IAEA inspection activities is presented, and the problem of evaluating the effectiveness of an inspection is discussed. Two models are described - an effort model and an effectiveness model. The effort model breaks the IAEA's inspection effort into components; the amount of effort required for each component is estimated; and the total effort is determined by summing the effort for each component. The effectiveness model quantifies the effectiveness of inspections in terms of probabilities of detection and quantities of material to be detected, if diverted over a specific period. The method is applied to a 200 metric ton per year low-enriched uranium fuel fabrication facility. A description of the model plant is presented, a safeguards approach is outlined, and sampling plans are calculated. The required inspection effort is estimated and the results are compared to IAEA estimates. Some other applications of the method are discussed briefly. Examples are presented which demonstrate how the method might be useful in formulating guidelines for inspection planning and in establishing technical criteria for safeguards implementation

  16. Dopamine, behavioral economics, and effort

    Directory of Open Access Journals (Sweden)

    John D Salamone

    2009-09-01

    Full Text Available Abstract. There are numerous problems with the hypothesis that brain dopamine (DA systems, particularly in the nucleus accumbens, directly mediate the rewarding or primary motivational characteristics of natural stimuli such as food. Research and theory related to the functions of mesolimbic DA are undergoing a substantial conceptual restructuring, with the traditional emphasis on hedonia and primary reward yielding to other concepts and lines of inquiry. The present review is focused upon the involvement of nucleus accumbens DA in behavioral activation and effort-related processes. Viewed from the framework of behavioral economics, the effects of accumbens DA depletions and antagonism on food-reinforced behavior are highly dependent upon the work requirements of the instrumental task, and DA depleted rats are more sensitive to increases in response costs (i.e., ratio requirements. Moreover, interference with accumbens DA transmission exerts a powerful influence over effort-related choice behavior. Rats with accumbens DA depletions or antagonism reallocate their instrumental behavior away from food-reinforced tasks that have high response requirements, and instead these rats select a less-effortful type of food-seeking behavior. Nucleus accumbens DA and adenosine interact in the regulation of effort-related functions, and other brain structures (anterior cingulate cortex, amygdala, ventral pallidum also are involved. Studies of the brain systems regulating effort-based processes may have implications for understanding drug abuse, as well as energy-related disorders such as psychomotor slowing, fatigue or anergia in depression and other neurological disorders.

  17. CURRENT DIRECTIONS OF RESEARCH IN INFORMATION- COMMUNICATION TECHNOLOGIES IN THE FIELD OF PEDAGOGICAL SCIENCE.

    Directory of Open Access Journals (Sweden)

    O.N. Spirin

    2010-11-01

    Full Text Available In the publication modern research areas of information-communication technologies in pedagogical science are identified. The basic requirements of the new passport for the specialty 13.00.10 - Information and Communication Technologies in Education are described. On this specialty the defence of the degree of doctor and candidate of pedagogical science may be carried out.

  18. Using Technology to Direct Learning in Higher Education: The Way Forward?

    Science.gov (United States)

    Turney, C. S. M.; Robinson, D.; Lee, M.; Soutar, A.

    2009-01-01

    Improvements in technology appear to provide an unprecedented opportunity to improve learning and teaching within the higher education system. At present, however, opinions are divided over the efficacy of such an approach and the extent to which technology should be embraced in teaching. Over a period of two years, we have developed a new…

  19. Residual DNA analysis in biologics development: review of measurement and quantitation technologies and future directions.

    Science.gov (United States)

    Wang, Xing; Morgan, Donna M; Wang, Gan; Mozier, Ned M

    2012-02-01

    Residual DNA (rDNA) is comprised of deoxyribonucleic acid (DNA) fragments and longer length molecules originating from the host organism that may be present in samples from recombinant biological processes. Although similar in basic structural base pair units, rDNA may exist in different sizes and physical forms. Interest in measuring rDNA in recombinant products is based primarily on demonstration of effective purification during manufacturing, but also on some hypothetical concerns that, in rare cases, depending on the host expression system, some DNA sequences may be potentially infectious or oncogenic (e.g., HIV virus and the Ras oncogene, respectively). Recent studies suggest that a sequence known as long interspersed nucleotide element-1 (LINE-1), widely distributed in the mammalian genome, is active as a retrotransposon that can be transcribed to RNA, reverse-transcribed into DNA and inserts into a new site in genome. This integration process could potentially disrupt critical gene functions or induce tumorigenesis in mammals. Genomic DNA from microbial sources, on the other hand, could add to risk of immunogenicity to the target recombinant protein being expressed, due to the high CpG content and unmethylated DNA sequence. For these and other reasons, it is necessary for manufacturers to show clearance of DNA throughout production processes and to confirm low levels in the final drug substance using an appropriately specific and quantitative analytical method. The heterogeneity of potential rDNA sequences that might be makes the testing of all potential analytes challenging. The most common methodology for rDNA quantitation used currently is real-time polymerase chain reaction (RT-PCR), a robust and proven technology. Like most rDNA quantitation methods, the specificity of RT-PCR is limited by the sequences to which the primers are directed. To address this, primase-based whole genome amplification is introduced herein. This paper will review the recent

  20. Additive manufacturing technologies 3D printing, rapid prototyping, and direct digital manufacturing

    CERN Document Server

    Gibson, Ian; Stucker, Brent

    2015-01-01

    This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given,  beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered  

  1. A comprehensive guide of remediation technologies for oil contaminated soil - Present works and future directions.

    Science.gov (United States)

    Lim, Mee Wei; Lau, Ee Von; Poh, Phaik Eong

    2016-08-15

    Oil spills result in negative impacts on the environment, economy and society. Due to tidal and waves actions, the oil spillage affects the shorelines by adhering to the soil, making it difficult for immediate cleaning of the soil. As shoreline clean-up is the most costly component of a response operation, there is a need for effective oil remediation technologies. This paper provides a review on the remediation technologies for soil contaminated with various types of oil, including diesel, crude oil, petroleum, lubricating oil, bitumen and bunker oil. The methods discussed include solvent extraction, bioremediation, phytoremediation, chemical oxidation, electrokinetic remediation, thermal technologies, ultrasonication, flotation and integrated remediation technologies. Each of these technologies was discussed, and associated with their advantages, disadvantages, advancements and future work in detail. Nonetheless, it is important to note that no single remediation technology is considered the best solution for the remediation of oil contaminated soil. This review provides a comprehensive literature on the various remediation technologies studied in the removal of different oil types from soil. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Interests, Effort, Achievement and Vocational Preference.

    Science.gov (United States)

    Sjoberg, L.

    1984-01-01

    Relationships between interest in natural sciences and technology and perceived ability, success, and invested effort were studied in Swedish secondary school students. Interests were accounted for by logical orientation and practical value. Interests and grades were strongly correlated, but correlations between interests and effort and vocational…

  3. Technology for America's economic growth : a new direction to build economic strength

    Science.gov (United States)

    1993-02-22

    Investing in technology is investing in America's future: a growing economy with more high-skill, high-wage jobs for American workers; a cleaner environment where energy efficiency increases profits and reduces pollution; a stronger, more competitive...

  4. Rad-hard Reconfigurable Bi-Directional Level Shifters Technology for Micro- and Nanosatellites, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Various technologies available to space system designers that operate at different voltage levels. It is, however, important to interface, maintain, and update these...

  5. Future directions of defense programs high-level waste technology programs

    International Nuclear Information System (INIS)

    Chee, T.C.; Shupe, M.W.; Turner, D.A.; Campbell, M.H.

    1987-01-01

    The Department of Energy has been managing high-level waste from the production of nuclear materials for defense activities over the last forty years. An objective for the Defense Waste and Transportation Management program is to develop technology which ensures the safe, permanent disposal of all defense radioactive wastes. Technology programs are underway to address the long-term strategy for permanent disposal of high-level waste generated at each Department of Energy site. Technology is being developed for assessing the hazards, environmental impacts, and costs of each long-term disposal alternative for selection and implementation. This paper addresses key technology development areas, and consideration of recent regulatory requirements associated with the long-term management of defense radioactive high-level waste

  6. The Global Rise of Zero Liquid Discharge for Wastewater Management: Drivers, Technologies, and Future Directions.

    Science.gov (United States)

    Tong, Tiezheng; Elimelech, Menachem

    2016-07-05

    Zero liquid discharge (ZLD)-a wastewater management strategy that eliminates liquid waste and maximizes water usage efficiency - has attracted renewed interest worldwide in recent years. Although implementation of ZLD reduces water pollution and augments water supply, the technology is constrained by high cost and intensive energy consumption. In this critical review, we discuss the drivers, incentives, technologies, and environmental impacts of ZLD. Within this framework, the global applications of ZLD in the United States and emerging economies such as China and India are examined. We highlight the evolution of ZLD from thermal- to membrane-based processes, and analyze the advantages and limitations of existing and emerging ZLD technologies. The potential environmental impacts of ZLD, notably greenhouse gas emission and generation of solid waste, are discussed and the prospects of ZLD technologies and research needs are highlighted.

  7. Perspectives of Students on Acceptance of Tablets and Self-directed Learning with Technology

    OpenAIRE

    Gokcearslan, Sahin

    2017-01-01

    Recent mobile learning technologies offer the opportunity for students to take charge ofthe learning process both inside and outside the classroom. One of these tools is the tabletPC (hereafter ‘tablet’). In parallel with increased access to e-content, the role of tablets inlearning has recently begun to be examined. This study aims to reveal the relationshipbetween the level of acceptance of tablets (TAM) and the level of selfdirectedlearning with technology (SDLT) of students and to differe...

  8. Working Group 2: Future Directions for Safeguards and Verification, Technology, Research and Development

    International Nuclear Information System (INIS)

    Zykov, S.; Blair, D.

    2013-01-01

    For traditional safeguards it was recognized that the hardware presently available is, in general, addressing adequately fundamental IAEA needs, and that further developments should therefore focus mainly on improving efficiencies (i.e. increasing cost economies, reliability, maintainability and user-friendliness, keeping abreast of continual advancements in technologies and of the evolution of verification approaches). Specific technology areas that could benefit from further development include: -) Non-destructive measurement systems (NDA), in particular, gamma-spectroscopy and neutron counting techniques; -) Containment and surveillance tools, such as tamper indicating seals, video-surveillance, surface identification methods, etc.; -) Geophysical methods for design information verification (DIV) and safeguarding of geological repositories; and -) New tools and methods for real-time monitoring. Furthermore, the Working Group acknowledged that a 'building block' (or modular) approach should be adopted towards technology development, enabling equipment to be upgraded efficiently as technologies advance. Concerning non-traditional safeguards, in the area of satellite-based sensors, increased spatial resolution and broadened spectral range were identified as priorities. In the area of wide area surveillance, the development of LIDAR-like tools for atmospheric sensing was discussed from the perspective of both potential benefits and certain limitations. Recognizing the limitations imposed by the human brain in terms of information assessment and analysis, technologies are needed that will enable the more effective utilization of all information, regardless of its format and origin. The paper is followed by the slides of the presentation. (A.C.)

  9. Remediation approaches for polycyclic aromatic hydrocarbons (PAHs) contaminated soils: Technological constraints, emerging trends and future directions.

    Science.gov (United States)

    Kuppusamy, Saranya; Thavamani, Palanisami; Venkateswarlu, Kadiyala; Lee, Yong Bok; Naidu, Ravi; Megharaj, Mallavarapu

    2017-02-01

    For more than a decade, the primary focus of environmental experts has been to adopt risk-based management approaches to cleanup PAH polluted sites that pose potentially destructive ecological consequences. This focus had led to the development of several physical, chemical, thermal and biological technologies that are widely implementable. Established remedial options available for treating PAH contaminated soils are incineration, thermal conduction, solvent extraction/soil washing, chemical oxidation, bioaugmentation, biostimulation, phytoremediation, composting/biopiles and bioreactors. Integrating physico-chemical and biological technologies is also widely practiced for better cleanup of PAH contaminated soils. Electrokinetic remediation, vermiremediation and biocatalyst assisted remediation are still at the development stage. Though several treatment methods to remediate PAH polluted soils currently exist, a comprehensive overview of all the available remediation technologies to date is necessary so that the right technology for field-level success is chosen. The objective of this review is to provide a critical overview in this respect, focusing only on the treatment options available for field soils and ignoring the spiked ones. The authors also propose the development of novel multifunctional green and sustainable systems like mixed cell culture system, biosurfactant flushing, transgenic approaches and nanoremediation in order to overcome the existing soil- contaminant- and microbial-associated technological limitations in tackling high molecular weight PAHs. The ultimate objective is to ensure the successful remediation of long-term PAH contaminated soils. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Experiences from operation of Pomorzany EBFGT plant and directions of technology development

    International Nuclear Information System (INIS)

    Paweleca, A.; Chmielewskia, A.G.; Tyminskia, B.; Zimek, Z.; Licki, J.; Mazurekc, L.; Sobolewskic, R.; Kostrzewskic, J.

    2011-01-01

    Electron beam flue gas treatment technology is one of the most advanced technologies among new generation air pollution control processes. It is the only one process for simultaneous removal of SO 2 and NO x , applied in the industrial scale. Moreover other pollutants as acidic compounds, VOC and dioxins can be removed in one step. Among the other advantages a fully usable by-product – a fertilizer is created in the process. The industrial demonstrational plant was constructed in EPS Pomorzany in Szczecin (Poland). The facility treats the flue gases of maximum flow of 270.000 Nm 3 /h, which are irradiated by four accelerators of 700 keV electron energy and 260 kW beam power each. The removal efficiency of SO 2 in this installation may reach 95%, while removal efficiency of NO x – 70%. Apart of technical analysis also economical calculations of investment and operational costs of EBFGT installations, based on the data obtained on the Polish installation, was performed. The results show that in the case of multi-pollutant control the electron beam technology is strongly competitive to conventional technologies. Description of the experiences obtained during the operation of the plant and further possibilities of the technology development are presented in this paper. (author)

  11. Experiences from operation of Pomorzany EBFGT plant and directions of technology development

    Energy Technology Data Exchange (ETDEWEB)

    Paweleca, A.; Chmielewskia, A. G.; Tyminskia, B.; Zimek, Z. [Institute of Nuclear Chemistry and Technology, Warsaw (Poland); Licki, J. [Institute of Atomic Energy, Otwock-Świerk (Poland); Mazurekc, L.; Sobolewskic, R.; Kostrzewskic, J. [Dolna Odra Group, Pomorzany Power Plant, Szczecin (Poland)

    2011-07-01

    Electron beam flue gas treatment technology is one of the most advanced technologies among new generation air pollution control processes. It is the only one process for simultaneous removal of SO{sub 2} and NO{sub x}, applied in the industrial scale. Moreover other pollutants as acidic compounds, VOC and dioxins can be removed in one step. Among the other advantages a fully usable by-product – a fertilizer is created in the process. The industrial demonstrational plant was constructed in EPS Pomorzany in Szczecin (Poland). The facility treats the flue gases of maximum flow of 270.000 Nm{sup 3}/h, which are irradiated by four accelerators of 700 keV electron energy and 260 kW beam power each. The removal efficiency of SO{sub 2} in this installation may reach 95%, while removal efficiency of NO{sub x} – 70%. Apart of technical analysis also economical calculations of investment and operational costs of EBFGT installations, based on the data obtained on the Polish installation, was performed. The results show that in the case of multi-pollutant control the electron beam technology is strongly competitive to conventional technologies. Description of the experiences obtained during the operation of the plant and further possibilities of the technology development are presented in this paper. (author)

  12. CO2 capture technologies: current status and new directions using supported ionic liquid phase (SILP) absorbers

    DEFF Research Database (Denmark)

    Kolding, Helene; Fehrmann, Rasmus; Riisager, Anders

    2012-01-01

    Current state-of-the-art techniques for CO2 capture are presented and discussed. Post-combustion capture of CO2 by absorption is the technology most easily retrofitted to existing installations, but at present this is not economically viable to install and run. Using ionic liquids instead...... of aqueous amine solutions overcomes the major thermodynamic issues. By applying SILP technology further advances, in terms of ease of handling and sorption dynamics, are obtained. Initial experimental studies showed that ionic liquids such as tetrahexylammonium prolinate, [N6666][Pro], provide a good...... candidate for CO2 absorption using SILP technology. Thus a solid SILP absorber comprised of 40 wt% [N6666][Pro] loaded on precalcined silica quantitatively takes up about 1.2 mole CO2 per mole of ionic liquid in consecutive absorption-desorption cycles in a flow-experiment performed with 0.09 bar of CO2 (9...

  13. Mass spectrometry-based proteomics: basic principles and emerging technologies and directions.

    Science.gov (United States)

    Van Riper, Susan K; de Jong, Ebbing P; Carlis, John V; Griffin, Timothy J

    2013-01-01

    As the main catalytic and structural molecules within living systems, proteins are the most likely biomolecules to be affected by radiation exposure. Proteomics, the comprehensive characterization of proteins within complex biological samples, is therefore a research approach ideally suited to assess the effects of radiation exposure on cells and tissues. For comprehensive characterization of proteomes, an analytical platform capable of quantifying protein abundance, identifying post-translation modifications and revealing members of protein complexes on a system-wide level is necessary. Mass spectrometry (MS), coupled with technologies for sample fractionation and automated data analysis, provides such a versatile and powerful platform. In this chapter we offer a view on the current state of MS-proteomics, and focus on emerging technologies within three areas: (1) New instrumental methods; (2) New computational methods for peptide identification; and (3) Label-free quantification. These emerging technologies should be valuable for researchers seeking to better understand biological effects of radiation on living systems.

  14. E-beam direct write versus reticle/stepper technology for ASICS in small volume production

    International Nuclear Information System (INIS)

    Wheeler, M.J.

    1987-01-01

    The pros and cons of using e-beam direct writing or reticles plus optical/UV steppers in fast prototyping and the small volume production of ASICs are discussed. The main conclusion is that fast prototyping is best achieved by e-beam direct write whereas small volume production of ASICs is best done via reticles and optical/UV stepping provided that the reticles are made in-house rather than by commercial maskhouses

  15. Proceedings of the advanced research and technology development direct utilization, instrumentation and diagnostics contractors' review meeting

    Energy Technology Data Exchange (ETDEWEB)

    Geiling, D.W. (USDOE Morgantown Energy Technology Center, WV (USA)); Goldberg, P.M. (eds.) (USDOE Pittsburgh Energy Technology Center, PA (USA))

    1990-01-01

    The 1990 Advanced Research and Technology Development (AR TD) Direct Utilization, and Instrumentation and Diagnostics Contractors Review Meeting was held September 16--18, 1990, at the Hyatt at Chatham Center in Pittsburgh, PA. The meeting was sponsored by the US Department of Energy (DOE), Office of Fossil Energy, and the Pittsburgh and Morgantown Energy Technology Centers. Each year the meeting provides a forum for the exchange of information among the DOE AR TD contractors and interested parties. This year's meeting was hosted by the Pittsburgh Energy Technology Center and was attended by 120 individuals from industry, academia, national laboratories, and other governmental agencies. Papers were presented on research addressing coal surface, science, devolatilization and combustion, ash behavior, emission controls for gases particulates, fluid bed combustion and utilization in diesels and turbines. Individual reports are processed separately for the data bases.

  16. Perspectives of Students on Acceptance of Tablets and Self-Directed Learning with Technology

    Science.gov (United States)

    Gokcearslan, Sahin

    2017-01-01

    Recent mobile learning technologies offer the opportunity for students to take charge of the learning process both inside and outside the classroom. One of these tools is the tablet PC (hereafter "tablet"). In parallel with increased access to e-content, the role of tablets in learning has recently begun to be examined. This study aims…

  17. Use of micro-emulsion technology for the directed evolution of antibodies.

    Science.gov (United States)

    Buhr, Diane L; Acca, Felicity E; Holland, Erika G; Johnson, Katie; Maksymiuk, Gail M; Vaill, Ada; Kay, Brian K; Weitz, David A; Weiner, Michael P; Kiss, Margaret M

    2012-09-01

    Affinity reagents, such as antibodies, are needed to study protein expression patterns, sub-cellular localization, and post-translational modifications in complex mixtures and tissues. Phage Emulsion, Secretion, and Capture (ESCape) is a novel micro-emulsion technology that utilizes water-in-oil (W/O) emulsions for the identification and isolation of cells secreting phage particles that display desirable antibodies. Using this method, a large library of antibody-displaying phage will bind to beads in individual compartments. Rather than using biopanning on a large mixed population, phage micro-emulsion technology allows us to individually query clonal populations of amplified phage against the antigen. The use of emulsions to generate microdroplets has the promise of accelerating phage selection experiments by permitting fine discrimination of kinetic parameters for binding to targets. In this study, we demonstrate the ability of phage micro-emulsion technology to distinguish two scFvs with a 300-fold difference in binding affinities (100nM and 300pM, respectively). In addition, we describe the application of phage micro-emulsion technology for the selection of scFvs that are resistant to elevated temperatures. Copyright © 2012. Published by Elsevier Inc.

  18. A New Direction for Technology-Based Economic Development: The Role of Innovation Intermediaries

    Science.gov (United States)

    Bendis, Richard A.; Seline, Richard S.; Byler, Ethan J.

    2008-01-01

    Accelerating innovation to drive economic growth is the foremost goal for technology-based economic development organizations today. Realizing this goal through programmes is challenged by limited and outdated operating models. The authors outline their 21st Century Innovation Intermediary model, which pairs commercialization with regional…

  19. Beyond Preservation: New Directions for Technological Innovation through Intangible Cultural Heritage

    Science.gov (United States)

    Robbins, Christopher

    2010-01-01

    While many digitization projects are currently underway, to help preserve Indigenous traditions, few explore the full potential of the development of digital media and networked technology through Indigenous cultures. This paper outlines the three phases necessary for a robust digital preservation, promotion and growth project: 1) Straightforward…

  20. Strategic planning of the National Direction of Nuclear Technology: period 2002-2005 last report

    International Nuclear Information System (INIS)

    2002-06-01

    The final report of strategic planning describes the uses and applications of the Nuclear Technology, situation, tendencies so much at international level as national, institutional organization of the Nuclear Sector in the Uruguay, assignment of the DNTN, nuclear politics of the Uruguay, development of the Net or Nuclear Sector and model proposed for Uruguay, general conclusions and Strategic Plan

  1. Future Directions in Medical Physics: Models, Technology, and Translation to Medicine

    Science.gov (United States)

    Siewerdsen, Jeffrey

    The application of physics in medicine has been integral to major advances in diagnostic and therapeutic medicine. Two primary areas represent the mainstay of medical physics research in the last century: in radiation therapy, physicists have propelled advances in conformal radiation treatment and high-precision image guidance; and in diagnostic imaging, physicists have advanced an arsenal of multi-modality imaging that includes CT, MRI, ultrasound, and PET as indispensible tools for noninvasive screening, diagnosis, and assessment of treatment response. In addition to their role in building such technologically rich fields of medicine, physicists have also become integral to daily clinical practice in these areas. The future suggests new opportunities for multi-disciplinary research bridging physics, biology, engineering, and computer science, and collaboration in medical physics carries a strong capacity for identification of significant clinical needs, access to clinical data, and translation of technologies to clinical studies. In radiation therapy, for example, the extraction of knowledge from large datasets on treatment delivery, image-based phenotypes, genomic profile, and treatment outcome will require innovation in computational modeling and connection with medical physics for the curation of large datasets. Similarly in imaging physics, the demand for new imaging technology capable of measuring physical and biological processes over orders of magnitude in scale (from molecules to whole organ systems) and exploiting new contrast mechanisms for greater sensitivity to molecular agents and subtle functional / morphological change will benefit from multi-disciplinary collaboration in physics, biology, and engineering. Also in surgery and interventional radiology, where needs for increased precision and patient safety meet constraints in cost and workflow, development of new technologies for imaging, image registration, and robotic assistance can leverage

  2. Climatic change, technological, financial and commercial flows : new directions in input-output analysis

    International Nuclear Information System (INIS)

    Cloutier, L.M.; DeBresson, C.; Dietzenbacher, E.

    2004-01-01

    This book presents the recent work of prominent economists who used the latest input-output analysis techniques to examine complex and interdependent problems such as global warming, climate change and greenhouse gas reduction. It proposes solutions to Solow's Paradox regarding information and communication technologies and examines the role of technological and financial flows. It also proposes theoretical applications for use in Quebec and Canada. The work of young economists who participated at the Leontief International Input-Output Association was also presented. The book is mainly intended for analysts of economic policies and for young researchers looking for advanced input-output analysis techniques. It offers a useful, realistic and systematic analysis of various issues facing contemporary companies. refs., tabs., figs

  3. UMRSFFS Additional Mapping Effort

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Recent developments in digital terrain and geospatial database management technology make it possible to protect this investment for existing and future projects to...

  4. EPA's Efforts in Eurasia

    Science.gov (United States)

    EPA has been collaborating with Russia, Central Asia, the Caucasus and Ukraine for over 20 years and continues to work with their governments and non-governmental organizations on environment, science and technology issues.

  5. NREL Quickens its Tech Transfer Efforts

    Energy Technology Data Exchange (ETDEWEB)

    Lammers, H.

    2012-02-01

    Innovations and 'aha' movements in renewable energy and energy efficiency, while exciting in the lab, only truly live up to their promise once they find a place in homes or business. Late last year President Obama issued a directive to all federal agencies to increase their efforts to transfer technologies to the private sector in order to achieve greater societal and economic impacts of federal research investments. The president's call to action includes efforts to establish technology transfer goals and to measure progress, to engage in efforts to increase the speed of technology transfer and to enhance local and regional innovation partnerships. But, even before the White House began its initiative to restructure the commercialization process, the National Renewable Energy Laboratory had a major effort underway designed to increase the speed and impact of technology transfer activities and had already made sure its innovations had a streamlined path to the private sector. For the last three years, NREL has been actively setting commercialization goals and tracking progress against those goals. For example, NREL sought to triple the number of innovations over a five-year period that began in 2009. Through best practices associated with inventor engagement, education and collaboration, NREL quadrupled the number of innovations in just three years. Similar progress has been made in patenting, licensing transactions, income generation and rewards to inventors. 'NREL is known nationally for our cutting-edge research and companies know to call us when they are ready to collaborate,' William Farris, vice president for commercialization and technology transfer, said. 'Once a team is ready to dive in, they don't want be mired in paperwork. We've worked to make our process for licensing NREL technology faster; it now takes less than 60 days for us to come to an agreement and start work with a company interested in our research

  6. Prospective directions of information and communication systems and technologies development in logistics

    Directory of Open Access Journals (Sweden)

    E. V. Pustynnikova

    2016-01-01

    Full Text Available At present time the high trade turnover is typical of the Russian economy, which in turn, activates a sufficient intensity of goods movement. Logistics, as a goods movement path in the context of a variety of delivery methods: road, air, water, pipeline, railroad transport, including across the customs border, is acutely affected by all kinds of economic transformation. Therefore, the creation of stable conditions for movement of goods under the terms of mutually beneficial cooperation is a priority for logistics. Trends of economic development are characterized by growth of integration processes which have expressed themselves positively and proven their economic suitability. Such transformations denote the necessity of the control mechanisms improvement, including logistics. The actual issue of business processes information support in circumstances of logistical integration is considered in this article. The basis of the information system consists of information and communication resources, tools and technologies, the use of which is aimed at solving specific problems for the shaping of information infrastructure, business process reengineering, supporting economic security of business. In process of this issue studying are becoming obvious undeniable advantages of information and communication technologies use in logistics operations, the gaining of which is possible as a result of an integrated system’s interests harmonization. The article provides evidence that the market has a certain influence on the improvement of information and communication systems and technologies for complex carrying out logistical operations, which, in turn, optimizes the duration of the movement of goods and related with this process costs, thereby determines the improvement of logistic conditions in terms of business growth and competitiveness development The article provides evidence that the market has a certain influence on the improvement of information

  7. Assessment of diagnostic technology in health care: rationale, methods, problems, and directions

    National Research Council Canada - National Science Library

    Sox, Harold C

    1989-01-01

    ... Rationale, Methods, Problems, and Directions Harold Sox, Susan Stern, Douglas Owens, and Herbert L. Abrams Institute of Medicine NATIONAL ACADEMY PRESS WASHINGTON, D.C. 1989 Copyrightthe cannot be not from book, paper however, version for formatting, original authoritative the typesetting-specific the as from created publication files XML from...

  8. Suppressing a Sea of Starlight : enabling technology for the direct imaging of exoplanets

    NARCIS (Netherlands)

    Otten, G.P.P.L.

    2016-01-01

    In this thesis we present multiple techniques to suppress starlight in order to better directly image planets around other stars. We propose a laboratory setup to test a new focal-plane wavefront sensing technique. We also show an optical device that suppresses starlight using liquid crystals (the

  9. Controlled drilling technology for HLW management. Directional drilling and mechanics/stress measurements in the borehole

    International Nuclear Information System (INIS)

    Kiho, Kenzo; Shin, Koichi; Okada, Tetsuji; Obuchi, Yasuyoshi; Sunaga, Takayuki; Hase, Kazunori

    2013-01-01

    Since 2000, Central Research Institute of Electric Power Industry (CRIEPI) has been conducting the project on controlled drilling and the logging/measurement technologies in its boreholes. Especially borehole pressure meter and bore hole stress measurement apparatus which can apply to the controlled drilling system was developed. The bore hole was drilled to the 1000 m long in order to intersect the Omagari fault located at Horonobe town in Hokkaido and its core recovery was 99.8% as of FY. 2011. Using borehole logging/measurement/survey, the geological, hydrological, geo-mechanical, geophysical and geochemical data were collected and the Omagari fault was characterized. (author)

  10. Attracting Foreign Direct Investment for Growth and Development in ...

    African Journals Online (AJOL)

    Foreign Direct Investment (FDI) plays an important role in fostering economic growth ... growth and development efforts, it also brings with it skills and new technology. ... Malaysia, Thailand and China, FDI inflows into sub-Saharan Africa pale.

  11. Point-of-care testing in the diagnosis of gastrointestinal cancers: current technology and future directions.

    Science.gov (United States)

    Huddy, Jeremy R; Ni, Melody Z; Markar, Sheraz R; Hanna, George B

    2015-04-14

    Point-of-care (POC) tests enable rapid results and are well established in medical practice. Recent advances in analytical techniques have led to a new generation of POC devices that will alter gastrointestinal diagnostic pathways. This review aims to identify current and new technologies for the POC diagnosis of gastrointestinal cancer. A structured search of the Embase and Medline databases was performed. Papers reporting diagnostic tests for gastrointestinal cancer available as a POC device or containing a description of feasibility for POC application were included. Studies recovered were heterogeneous and therefore results are presented as a narrative review. Six diagnostic methods were identified (fecal occult blood, fecal proteins, volatile organic compounds, pyruvate kinase isoenzyme type M2, tumour markers and DNA analysis). Fecal occult blood testing has a reported sensitivity of 66%-85% and specificity greater than 95%. The others are at a range of development and clinical application. POC devices have a proven role in the diagnosis of gastrointestinal cancer. Barriers to their implementation exist and the transition from experimental to clinical medicine is currently slow. New technologies demonstrate potential to provide accurate POC tests and an ability to diagnose gastrointestinal cancer at an early stage with improved clinical outcome and survival.

  12. A research proposal for investigating the effect of foreign direct investments on technology transfer in the Arabian Gulf (GCC)

    Science.gov (United States)

    Tahat, Kaher; Whelan, Susan

    2015-02-01

    In terms of hosting countries perspectives, Foreign Direct Investments (FDI) could have a positive effect on its developing economy, by transferring, both: resources of finance in addition to the international technology (ITT) (Choi, 1997). Multinational companies (MNC) are engaging in the transferring of the new technology, internally as well as licensing older one; they create "Spillover" (Knowledge) for facilitating the transfer of ITT in line with geographical location, period of investment, and the type of industry. Furthermore, the effect of these spillovers depends on the level of transferring this knowledge based on FDI attraction policies of the host country (Huang, 2009). Considering the Arabian Gulf council countries (GCC) as "FDI- rich hosting countries", who are not seeking for financial resources, i.e., they already have a huge financial capacity for funding their different projects, even though FDI has been powerfully presented in GCC . They saw noticeable increases in FDI inflows beginning in 2002, (www.unctad.org.fdistatistics). Therefore by assumption, FDI inflows to GCC could positively affect their economic growth through transferring the advanced technology, in order to build up their level of technology (productivity growth) as well as their economic diversification strategy. If so how this Knowledge could be diffused and measured in order to maximize its benefit and enhancing the productivity growth, and what is the current status of (GCC).

  13. Horizontal Directional Drilling-Length Detection Technology While Drilling Based on Bi-Electro-Magnetic Sensing

    Directory of Open Access Journals (Sweden)

    Yudan Wang

    2017-04-01

    Full Text Available The drilling length is an important parameter in the process of horizontal directional drilling (HDD exploration and recovery, but there has been a lack of accurate, automatically obtained statistics regarding this parameter. Herein, a technique for real-time HDD length detection and a management system based on the electromagnetic detection method with a microprocessor and two magnetoresistive sensors employing the software LabVIEW are proposed. The basic principle is to detect the change in the magnetic-field strength near a current coil while the drill stem and drill-stem joint successively pass through the current coil forward or backward. The detection system consists of a hardware subsystem and a software subsystem. The hardware subsystem employs a single-chip microprocessor as the main controller. A current coil is installed in front of the clamping unit, and two magneto resistive sensors are installed on the sides of the coil symmetrically and perpendicular to the direction of movement of the drill pipe. Their responses are used to judge whether the drill-stem joint is passing through the clamping unit; then, the order of their responses is used to judge the movement direction. The software subsystem is composed of a visual software running on the host computer and a software running in the slave microprocessor. The host-computer software processes, displays, and saves the drilling-length data, whereas the slave microprocessor software operates the hardware system. A combined test demonstrated the feasibility of the entire drilling-length detection system.

  14. Micro tooling technologies for polymer micro replication: direct, indirect and hybrid process chains

    DEFF Research Database (Denmark)

    Tosello, Guido; Hansen, Hans Nørgaard

    2009-01-01

    The increasing employment of micro products, of products containing micro parts and of products with micro-structured surfaces calls for mass fabrication technologies based on replication processes. In many cases, a suitable solution is given by the use of polymer micro products, whose production...... and performance of the corresponding micro mould. Traditional methods of micro tooling, such as various machining processes (e.g. micro milling, micro electrical discharge machining) have already reached their limitations with decreasing dimensions of mould inserts and cavities. To this respect, tooling process...... chains based on combination of micro manufacturing processes (defined as hybrid tooling) have been established in order to obtain further features miniaturization and increased accuracy. In this paper, examples and performance of different hybrid tooling approaches as well as challenges, opportunities...

  15. Direct imaging and new technologies to search for substellar companions around MGs cool dwarfs

    Directory of Open Access Journals (Sweden)

    Burningham B.

    2011-07-01

    Full Text Available We describe here our project based in a search for sub-stellar companions (brown dwarfs and exo-planets around young ultra-cool dwarfs (UCDs and characterise their properties. We will use current and future technology (high contrast imaging, high-precision Doppler determinations from the ground and space (VLT, ELT and JWST, to find companions to young objects. Members of young moving groups (MGs have clear advantages in this field. We compiled a catalogue of young UCD objects and studied their membership to five known young moving groups: Local Association (Pleiades moving group, 20–150 Myr, Ursa Mayor group (Sirius supercluster, 300 Myr, Hyades supercluster (600 Myr, IC 2391 supercluster (35 Myr and Castor moving group (200 Myr. To assess them as members we used different kinematic and spectroscopic criteria.

  16. Proton exchange membrane materials for the advancement of direct methanol fuel-cell technology

    Science.gov (United States)

    Cornelius, Christopher J [Albuquerque, NM

    2006-04-04

    A new class of hybrid organic-inorganic materials, and methods of synthesis, that can be used as a proton exchange membrane in a direct methanol fuel cell. In contrast with Nafion.RTM. PEM materials, which have random sulfonation, the new class of materials have ordered sulfonation achieved through self-assembly of alternating polyimide segments of different molecular weights comprising, for example, highly sulfonated hydrophilic PDA-DASA polyimide segment alternating with an unsulfonated hydrophobic 6FDA-DAS polyimide segment. An inorganic phase, e.g., 0.5 5 wt % TEOS, can be incorporated in the sulfonated polyimide copolymer to further improve its properties. The new materials exhibit reduced swelling when exposed to water, increased thermal stability, and decreased O.sub.2 and H.sub.2 gas permeability, while retaining proton conductivities similar to Nafion.RTM.. These improved properties may allow direct methanol fuel cells to operate at higher temperatures and with higher efficiencies due to reduced methanol crossover.

  17. 2D temperature field measurement in a direct-injection engine using LIF technology

    Science.gov (United States)

    Liu, Yongfeng; Tian, Hongsen; Yang, Jianwei; Sun, Jianmin; Zhu, Aihua

    2011-12-01

    A new multi-spectral detection strategy for temperature laser- induced- fluorescence (LIF) 2-D imaging measurements is reported for high pressure flames in high-speed diesel engine. Schematic of the experimental set-up is outlined and the experimental data on the diesel engine is summarized. Experiment injection system is a third generation Bosch high-pressure common rail featuring a maximum pressure of 160MPa. The injector is equipped with a six-hole nozzle, where each hole has a diameter of 0.124 mm. and slightly offset to the center of the cylinder axis to allow a better cooling of the narrow bridge between the exhaust valves. The measurement system includes a blower, which supplied the intake flow rate, and a prototype single-valve direct injection diesel engine head modified to lay down the swirled-type injector. 14-bit digital CCD cameras are employed to achieve a greater level of accuracy in comparison to the results of previous measurements. The temperature field spatial distributions in the cylinder for different crank angle degrees are carried out in a single direct-injection diesel engine.

  18. The alkali metal thermoelectric converter /AMTEC/ - A new direct energy conversion technology for aerospace power

    Science.gov (United States)

    Bankston, C. P.; Cole, T.; Jones, R.; Ewell, R.

    1982-01-01

    A thermally regenerative electrochemical device for the direct conversion of heat to electrical energy, the alkali metal thermoelectric converter (AMTEC), is characterized by potential efficiencies on the order of 15-40% and possesses no moving parts, making it a candidate for space power system applications. Device conversion efficiency is projected on the basis of experimental voltage vs current curves exhibiting power densities of 0.7 W/sq cm and measured electrode efficiencies of up to 40%. Preliminary radiative heat transfer measurements presented may be used in an investigation of methods for the reduction of AMTEC parasitic radiation losses. AMTEC assumes heat input and rejection temperatures of 900-1300 K and 400-800 K, respectively. The working fluid is liquid sodium, and the porous electrode employed is of molybdenum.

  19. Evaluation of PMS-PCR technology for detection of Mycobacterium avium subsp. paratuberculosis directly from bovine fecal specimens.

    Science.gov (United States)

    Salgado, M; Steuer, P; Troncoso, E; Collins, M T

    2013-12-27

    Mycobacterium avium subsp. paratuberculosis (MAP) causes paratuberculosis, or Johne's disease, in animals. Diagnosis of MAP infection is challenging because of the pathogen's fastidious in vitro growth requirements and low-level intermittent shedding in feces during the preclinical phase of the infection. Detection of these "low-shedders" is important for effective control of paratuberculosis as these animals serve as sources of infection for susceptible calves. Magnetic separation technology, used in combination with culture or molecular methods for the isolation and detection of pathogenic bacteria, enhances the analytical sensitivity and specificity of detection methods. The aim of the present study was to evaluate peptide-mediated magnetic separation (PMS) capture technology coupled with IS900 PCR using the Roche real-time PCR system (PMS-PCR), in comparison with fecal culture using BACTEC-MGIT 960 system, for detection of MAP in bovine fecal samples. Among the 351 fecal samples 74.9% (263/351) were PMS-PCR positive while only 12.3% (43/351) were MGIT culture-positive (p=0.0001). All 43 MGIT culture-positive samples were also positive by PMS-PCR. Mean PMS-PCR crossing-point (Cp) values for the 13 fecal samples with the highest number of MAP, based on time to detection, (26.3) were significantly lower than for the 17 fecal samples with technology provided results in a shorter time and yielded a higher number of positive results than MGIT culture. Earlier and faster detection of animals shedding MAP by PMS-PCR should significantly strengthen control efforts for MAP-infected cattle herds by helping to limit infection transmission at earlier stages of the infection. Copyright © 2013 Elsevier B.V. All rights reserved.

  20. A high-throughput readout architecture based on PCI-Express Gen3 and DirectGMA technology

    International Nuclear Information System (INIS)

    Rota, L.; Vogelgesang, M.; Perez, L.E. Ardila; Caselle, M.; Chilingaryan, S.; Dritschler, T.; Zilio, N.; Kopmann, A.; Balzer, M.; Weber, M.

    2016-01-01

    Modern physics experiments produce multi-GB/s data rates. Fast data links and high performance computing stages are required for continuous data acquisition and processing. Because of their intrinsic parallelism and computational power, GPUs emerged as an ideal solution to process this data in high performance computing applications. In this paper we present a high-throughput platform based on direct FPGA-GPU communication. The architecture consists of a Direct Memory Access (DMA) engine compatible with the Xilinx PCI-Express core, a Linux driver for register access, and high- level software to manage direct memory transfers using AMD's DirectGMA technology. Measurements with a Gen3 x8 link show a throughput of 6.4 GB/s for transfers to GPU memory and 6.6 GB/s to system memory. We also assess the possibility of using the architecture in low latency systems: preliminary measurements show a round-trip latency as low as 1 μs for data transfers to system memory, while the additional latency introduced by OpenCL scheduling is the current limitation for GPU based systems. Our implementation is suitable for real-time DAQ system applications ranging from photon science and medical imaging to High Energy Physics (HEP) systems

  1. Literality and Cognitive Effort

    DEFF Research Database (Denmark)

    Lacruz, Isabel; Carl, Michael; Yamada, Masaru

    2018-01-01

    We introduce a notion of pause-word ratio computed using ranges of pause lengths rather than lower cutoffs for pause lengths. Standard pause-word ratios are indicators of cognitive effort during different translation modalities.The pause range version allows for the study of how different types...... remoteness. We use data from the CRITT TPR database, comparing translation and post-editing from English to Japanese and from English to Spanish, and study the interaction of pause-word ratio for short pauses ranging between 300 and 500ms with syntactic remoteness, measured by the CrossS feature, semantic...... remoteness, measured by HTra, and syntactic and semantic remoteness, measured by Literality....

  2. Breckinridge Project, initial effort

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    1982-09-01

    Report III, Volume 1 contains those specifications numbered A through J, as follows: General Specifications (A); Specifications for Pressure Vessels (C); Specifications for Tanks (D); Specifications for Exchangers (E); Specifications for Fired Heaters (F); Specifications for Pumps and Drivers (G); and Specifications for Instrumentation (J). The standard specifications of Bechtel Petroleum Incorporated have been amended as necessary to reflect the specific requirements of the Breckinridge Project, and the more stringent specifications of Ashland Synthetic Fuels, Inc. These standard specifications are available to the Initial Effort (Phase Zero) work performed by all contractors and subcontractors. Report III, Volume 1 also contains the unique specifications prepared for Plants 8, 15, and 27. These specifications will be substantially reviewed during Phase I of the project, and modified as necessary for use during the engineering, procurement, and construction of this project.

  3. Wombat reproduction (Marsupialia; Vombatidae): an update and future directions for the development of artificial breeding technology.

    Science.gov (United States)

    Hogan, Lindsay A; Janssen, Tina; Johnston, Stephen D

    2013-06-01

    This review provides an update on what is currently known about wombat reproductive biology and reports on attempts made to manipulate and/or enhance wombat reproduction as part of the development of artificial reproductive technology (ART) in this taxon. Over the last decade, the logistical difficulties associated with monitoring a nocturnal and semi-fossorial species have largely been overcome, enabling new features of wombat physiology and behaviour to be elucidated. Despite this progress, captive propagation rates are still poor and there are areas of wombat reproductive biology that still require attention, e.g. further characterisation of the oestrous cycle and oestrus. Numerous advances in the use of ART have also been recently developed in the Vombatidae but despite this research, practical methods of manipulating wombat reproduction for the purposes of obtaining research material or for artificial breeding are not yet available. Improvement of the propagation, genetic diversity and management of wombat populations requires a thorough understanding of Vombatidae reproduction. While semen collection and cryopreservation in wombats is fairly straightforward there is currently an inability to detect, induce or synchronise oestrus/ovulation and this is an impeding progress in the development of artificial insemination in this taxon.

  4. Large-screen display industry: market and technology trends for direct view and projection displays

    Science.gov (United States)

    Castellano, Joseph A.; Mentley, David E.

    1996-03-01

    Large screen information displays are defined as dynamic electronic displays that can be viewed by more than one person and are at least 2-feet wide. These large area displays for public viewing provide convenience, entertainment, security, and efficiency to the viewers. There are numerous uses for large screen information displays including those in advertising, transportation, traffic control, conference room presentations, computer aided design, banking, and military command/control. A noticeable characteristic of the large screen display market is the interchangeability of display types. For any given application, the user can usually choose from at least three alternative technologies, and sometimes from many more. Some display types have features that make them suitable for specific applications due to temperature, brightness, power consumption, or other such characteristic. The overall worldwide unit consumption of large screen information displays of all types and for all applications (excluding consumer TV) will increase from 401,109 units in 1995 to 655,797 units in 2002. On a unit consumption basis, applications in business and education represent the largest share of unit consumption over this time period; in 1995, this application represented 69.7% of the total. The market (value of shipments) will grow from DOL3.1 billion in 1995 to DOL3.9 billion in 2002. The market will be dominated by front LCD projectors and LCD overhead projector plates.

  5. Information technology in pharmacovigilance: Benefits, challenges, and future directions from industry perspectives

    Directory of Open Access Journals (Sweden)

    Zhengwu Lu

    2009-10-01

    Full Text Available Zhengwu LuClinical Research Department, Abbott Vascular, Santa Clara, CA, USAAbstract: Risk assessment during clinical product development needs to be conducted in a thorough and rigorous manner. However, it is impossible to identify all safety concerns during controlled clinical trials. Once a product is marketed, there is generally a large increase in the number of patients exposed, including those with comorbid conditions and those being treated with concomitant medications. Therefore, postmarketing safety data collection and clinical risk assessment based on observational data are critical for evaluating and characterizing a product’s risk profile and for making informed decisions on risk minimization. Information science promises to deliver effective e-clinical or e-health solutions to realize several core benefits: time savings, high quality, cost reductions, and increased efficiencies with safer and more efficacious medicines. The development and use of standard-based pharmacovigilance system with integration connection to electronic medical records, electronic health records, and clinical data management system holds promise as a tool for enabling early drug safety detections, data mining, results interpretation, assisting in safety decision making, and clinical collaborations among clinical partners or different functional groups. The availability of a publicly accessible global safety database updated on a frequent basis would further enhance detection and communication about safety issues. Due to recent high-profile drug safety problems, the pharmaceutical industry is faced with greater regulatory enforcement and increased accountability demands for the protection and welfare of patients. This changing climate requires biopharmaceutical companies to take a more proactive approach in dealing with drug safety and pharmacovigilance.Keywords: information technology, pharmacovigilance, safety, standard, risk management, adverse event

  6. Exploration of suitable dry etch technologies for directed self-assembly

    Science.gov (United States)

    Yamashita, Fumiko; Nishimura, Eiichi; Yatsuda, Koichi; Mochiki, Hiromasa; Bannister, Julie

    2012-03-01

    Directed self-assembly (DSA) has shown the potential to replace traditional resist patterns and provide a lower cost alternative for sub-20-nm patterns. One of the possible roadblocks for DSA implementation is the ability to etch the polymers to produce quality masks for subsequent etch processes. We have studied the effects of RF frequency and etch chemistry for dry developing DSA patterns. The results of the study showed a capacitively-coupled plasma (CCP) reactor with very high frequency (VHF) had superior pattern development after the block co-polymer (BCP) etch. The VHF CCP demonstrated minimal BCP height loss and line edge roughness (LER)/line width roughness (LWR). The advantage of CCP over ICP is the low dissociation so the etch rate of BCP is maintained low enough for process control. Additionally, the advantage of VHF is the low electron energy with a tight ion energy distribution that enables removal of the polymethyl methacrylate (PMMA) with good selectivity to polystyrene (PS) and minimal LER/LWR. Etch chemistries were evaluated on the VHF CCP to determine ability to treat the BCPs to increase etch resistance and feature resolution. The right combination of RF source frequencies and etch chemistry can help overcome the challenges of using DSA patterns to create good etch results.

  7. Breckinridge Project, initial effort

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-01-01

    Report IV, Volume 6 provides descriptions, data, and drawings pertaining to Gasification and Purification (Plant 12). Gasification and Purification (Plant 12) produces makeup hydrogen for H-COAL Preheating and Reaction (Plant 3), and produces a medium Btu fuel gas for consumption in fired heaters. The following information is included: a description of the plant's process design, including the utility balance, catalysts and chemicals usage, and a process flow diagram; an equipment list, including item numbers and descriptions; data sheets and sketches for major plant components; and pertinent engineering drawings. An appendix contains: an overall site plan showing the locations of all plants; and the symbols and legend for the piping and instrument diagrams included in this volume. Gasification and Purification (Plant 12) utilizes process technology from three licensors: gasification of vacuum bottoms using the Texaco process, shift conversion using the Haldor Topsoe process, and purification of fuel gas and shifted gas using the Allied Chemical Selexol process. This licensed technology is proprietary in nature. As a result, this volume does not contain full disclosure of these processes although a maximum of information has been presented consistent with the confidentiality requirements. Where data appears incomplete in this volume, it is due to the above described limitations. Full data concerning this plant are available for DOE review at the Houston offices of Bechtel Petroleum, Inc.

  8. A direct observation method for auditing large urban centers using stratified sampling, mobile GIS technology and virtual environments.

    Science.gov (United States)

    Lafontaine, Sean J V; Sawada, M; Kristjansson, Elizabeth

    2017-02-16

    With the expansion and growth of research on neighbourhood characteristics, there is an increased need for direct observational field audits. Herein, we introduce a novel direct observational audit method and systematic social observation instrument (SSOI) for efficiently assessing neighbourhood aesthetics over large urban areas. Our audit method uses spatial random sampling stratified by residential zoning and incorporates both mobile geographic information systems technology and virtual environments. The reliability of our method was tested in two ways: first, in 15 Ottawa neighbourhoods, we compared results at audited locations over two subsequent years, and second; we audited every residential block (167 blocks) in one neighbourhood and compared the distribution of SSOI aesthetics index scores with results from the randomly audited locations. Finally, we present interrater reliability and consistency results on all observed items. The observed neighbourhood average aesthetics index score estimated from four or five stratified random audit locations is sufficient to characterize the average neighbourhood aesthetics. The SSOI was internally consistent and demonstrated good to excellent interrater reliability. At the neighbourhood level, aesthetics is positively related to SES and physical activity and negatively correlated with BMI. The proposed approach to direct neighbourhood auditing performs sufficiently and has the advantage of financial and temporal efficiency when auditing a large city.

  9. Swedish nuclear waste efforts

    International Nuclear Information System (INIS)

    Rydberg, J.

    1981-09-01

    After the introduction of a law prohibiting the start-up of any new nuclear power plant until the utility had shown that the waste produced by the plant could be taken care of in an absolutely safe way, the Swedish nuclear utilities in December 1976 embarked on the Nuclear Fuel Safety Project, which in November 1977 presented a first report, Handling of Spent Nuclear Fuel and Final Storage of Vitrified Waste (KBS-I), and in November 1978 a second report, Handling and Final Storage of Unreprocessed Spent Nuclear Fuel (KBS II). These summary reports were supported by 120 technical reports prepared by 450 experts. The project engaged 70 private and governmental institutions at a total cost of US $15 million. The KBS-I and KBS-II reports are summarized in this document, as are also continued waste research efforts carried out by KBS, SKBF, PRAV, ASEA and other Swedish organizations. The KBS reports describe all steps (except reprocessing) in handling chain from removal from a reactor of spent fuel elements until their radioactive waste products are finally disposed of, in canisters, in an underground granite depository. The KBS concept relies on engineered multibarrier systems in combination with final storage in thoroughly investigated stable geologic formations. This report also briefly describes other activities carried out by the nuclear industry, namely, the construction of a central storage facility for spent fuel elements (to be in operation by 1985), a repository for reactor waste (to be in operation by 1988), and an intermediate storage facility for vitrified high-level waste (to be in operation by 1990). The R and D activities are updated to September 1981

  10. Worldwide effort against smoking.

    Science.gov (United States)

    1986-07-01

    The 39th World Health Assembly, which met in May 1986, recognized the escalating health problem of smoking-related diseases and affirmed that tobacco smoking and its use in other forms are incompatible with the attainment of "Health for All by the Year 2000." If properly implemented, antismoking campaigns can decrease the prevalence of smoking. Nations as a whole must work toward changing smoking habits, and governments must support these efforts by officially stating their stand against smoking. Over 60 countries have introduced legislation affecting smoking. The variety of policies range from adopting a health education program designed to increase peoples' awareness of its dangers to increasing taxes to deter smoking by increasing tobacco prices. Each country must adopt an antismoking campaign which works most effectively within the cultural parameters of the society. Other smoking policies include: printed warnings on cigarette packages; health messages via radio, television, mobile teams, pamphlets, health workers, clinic walls, and newspapers; prohibition of smoking in public areas and transportation; prohibition of all advertisement of cigarettes and tobacco; and the establishment of upper limits of tar and nicotine content in cigarettes. The tobacco industry spends about $2000 million annually on worldwide advertising. According to the World Health Organization (WHO), controlling this overabundance of tobacco advertisements is a major priority in preventing the spread of smoking. Cigarette and tobacco advertising can be controlled to varying degrees, e.g., over a dozen countries have enacted a total ban on advertising on television or radio, a mandatory health warning must accompany advertisements in other countries, and tobacco companies often are prohibited from sponsoring sports events. Imposing a substantial tax on cigarettes is one of the most effective means to deter smoking. However, raising taxes and banning advertisements is not enough because

  11. Environmental policy and technological change: The effects of economic incentives and direct regulation on energy-saving innovation

    Science.gov (United States)

    Newell, Richard G., Jr.

    Over the long run, the impacts of environmental policies will be greatly affected by the influence these policies have on the rate and direction of technological change. In particular, the roles played by energy prices and product regulation in energy-saving technology innovation are exceptionally important considerations in modeling climate change and evaluating alternative policy options. We analyze the effects of energy prices and energy-efficiency regulations on the menu of air conditioner and water heater models available on the market over a period of more than three decades, measuring their innovation in terms of improvements in the products' underlying characteristics. Through estimation of a series of "characteristics transformation surfaces," we find that during less than four decades, substantial innovation in these products reduced the total capital and operating costs of air conditioning by one-half and water heating by more than one-fifth. Although the overall rate of innovation in these products appears to be independent of energy prices and regulations, the evidence suggests that the direction of innovation may be responsive to energy price changes. This would imply that energy price increases induced innovation in a direction that lowered the capital cost tradeoffs inherent in producing more energy-efficient products. The evidence supporting "regulation-induced" changes in these tradeoffs is much weaker. Our estimates indicate that about one- to two-fifths of the energy-efficiency improvements in these products from 1973 to 1993 were associated with historical changes in energy prices. We also find that this responsiveness to price changes increased substantially after product labeling requirements came into effect, and that minimum efficiency standards had a significant positive effect on average efficiency levels. Nonetheless, a sizeable portion of historical efficiency improvements in these technologies is associated with the products' overall

  12. STEM Education Efforts in the Ares Projects

    Science.gov (United States)

    Doreswamy, Rajiv; Armstrong, Robert C.

    2010-01-01

    According to the National Science Foundation, of the more than 4 million first university degrees awarded in science and engineering in 2006, students in China earned about 21%, those in the European Union earned about 19%, and those in the United States earned about 11%. Statistics like these are of great interest to NASA's Ares Projects, which are responsible for building the rockets for the U.S. Constellation Program to send humans beyond low-Earth orbit. Science, technology, engineering, and mathematics students are essential for the long-term sustainability of any space program. Since the Projects creation, the Ares Outreach Team has used a variety of STEM-related media, methods, and materials to engage students, educators, and the general public in Constellation's mission. Like Project Apollo, the nation s exploration destinations and the vehicles used to get there can inspire students to learn more about STEM. Ares has been particularly active in public outreach to schools in Northern Alabama; on the Internet via outreach and grade-specific educational materials; and in more informal social media settings such as YouTube and Facebook. These combined efforts remain integral to America s space program, regardless of its future direction.

  13. 75 FR 10694 - Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd Models N22B, N22S, and N24A...

    Science.gov (United States)

    2010-03-09

    ... Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd Models N22B, N22S, and N24A Airplanes... authority for Australia, has issued AD GAF-N22-52, Amendment 1, dated January 2010 (referred to after this... examining the MCAI in the AD docket. Relevant Service Information AeroSpace Technologies of Australia...

  14. Direct fabrication through electron beam melting technology of custom cranial implants designed in a PHANToM-based haptic environment

    International Nuclear Information System (INIS)

    Mazzoli, Alida; Germani, Michele; Raffaeli, Roberto

    2009-01-01

    Repairing critical human skull injuries requires the production and use of customized cranial implants and involves the integration of computer aided design and manufacturing (CAD and CAM). The main causes for large cranial defects are trauma, cranial tumors, infected craniotomy bone flaps and external neurosurgical decompression. The success of reconstructive cranial surgery depends upon: the preoperative evaluation of the defect, the design and manufacturing of the implant, and the skill of the operating surgeon. Cranial implant design is usually carried out manually using CAD although this process is very time-consuming and the quality of the end product depends wholly upon the skill of the operator. This paper presents an alternative automated method for the design of custom-made cranial plates in a PHANToM ® -based haptic environment, and their direct fabrication in biocompatible metal using electron beam melting (EBM) technology.

  15. Hydrogen economy: a little bit more effort

    International Nuclear Information System (INIS)

    Pauron, M.

    2008-01-01

    In few years, the use of hydrogen in economy has become a credible possibility. Today, billions of euros are invested in the hydrogen industry which is strengthened by technological advances in fuel cells development and by an increasing optimism. However, additional research efforts and more financing will be necessary to make the dream of an hydrogen-based economy a reality

  16. The Effort Paradox: Effort Is Both Costly and Valued.

    Science.gov (United States)

    Inzlicht, Michael; Shenhav, Amitai; Olivola, Christopher Y

    2018-04-01

    According to prominent models in cognitive psychology, neuroscience, and economics, effort (be it physical or mental) is costly: when given a choice, humans and non-human animals alike tend to avoid effort. Here, we suggest that the opposite is also true and review extensive evidence that effort can also add value. Not only can the same outcomes be more rewarding if we apply more (not less) effort, sometimes we select options precisely because they require effort. Given the increasing recognition of effort's role in motivation, cognitive control, and value-based decision-making, considering this neglected side of effort will not only improve formal computational models, but also provide clues about how to promote sustained mental effort across time. Copyright © 2018 Elsevier Ltd. All rights reserved.

  17. A Comprehensive Study of Key Electric Vehicle (EV Components, Technologies, Challenges, Impacts, and Future Direction of Development

    Directory of Open Access Journals (Sweden)

    Fuad Un-Noor

    2017-08-01

    Full Text Available Electric vehicles (EV, including Battery Electric Vehicle (BEV, Hybrid Electric Vehicle (HEV, Plug-in Hybrid Electric Vehicle (PHEV, Fuel Cell Electric Vehicle (FCEV, are becoming more commonplace in the transportation sector in recent times. As the present trend suggests, this mode of transport is likely to replace internal combustion engine (ICE vehicles in the near future. Each of the main EV components has a number of technologies that are currently in use or can become prominent in the future. EVs can cause significant impacts on the environment, power system, and other related sectors. The present power system could face huge instabilities with enough EV penetration, but with proper management and coordination, EVs can be turned into a major contributor to the successful implementation of the smart grid concept. There are possibilities of immense environmental benefits as well, as the EVs can extensively reduce the greenhouse gas emissions produced by the transportation sector. However, there are some major obstacles for EVs to overcome before totally replacing ICE vehicles. This paper is focused on reviewing all the useful data available on EV configurations, battery energy sources, electrical machines, charging techniques, optimization techniques, impacts, trends, and possible directions of future developments. Its objective is to provide an overall picture of the current EV technology and ways of future development to assist in future researches in this sector.

  18. Potential of direct metal deposition technology for manufacturing thick functionally graded coatings and parts for reactors components

    International Nuclear Information System (INIS)

    Thivillon, L.; Bertrand, Ph.; Laget, B.; Smurov, I.

    2009-01-01

    Direct metal deposition (DMD) is an automated 3D deposition process arising from laser cladding technology with co-axial powder injection to refine or refurbish parts. Recently DMD has been extended to manufacture large-size near-net-shape components. When applied for manufacturing new parts (or their refinement), DMD can provide tailored thermal properties, high corrosion resistance, tailored tribology, multifunctional performance and cost savings due to smart material combinations. In repair (refurbishment) operations, DMD can be applied for parts with a wide variety of geometries and sizes. In contrast to the current tool repair techniques such as tungsten inert gas (TIG), metal inert gas (MIG) and plasma welding, laser cladding technology by DMD offers a well-controlled heat-treated zone due to the high energy density of the laser beam. In addition, this technology may be used for preventative maintenance and design changes/up-grading. One of the advantages of DMD is the possibility to build functionally graded coatings (from 1 mm thickness and higher) and 3D multi-material objects (for example, 100 mm-sized monolithic rectangular) in a single-step manufacturing cycle by using up to 4-channel powder feeder. Approved materials are: Fe (including stainless steel), Ni and Co alloys, (Cu,Ni 10%), WC compounds, TiC compounds. The developed coatings/parts are characterized by low porosity (<1%), fine microstructure, and their microhardness is close to the benchmark value of wrought alloys after thermal treatment (Co-based alloy Stellite, Inox 316L, stainless steel 17-4PH). The intended applications concern cooling elements with complex geometry, friction joints under high temperature and load, light-weight mechanical support structures, hermetic joints, tubes with complex geometry, and tailored inside and outside surface properties, etc

  19. Potential of direct metal deposition technology for manufacturing thick functionally graded coatings and parts for reactors components

    Energy Technology Data Exchange (ETDEWEB)

    Thivillon, L.; Bertrand, Ph.; Laget, B. [Ecole Nationale d' Ingenieurs de Saint-Etienne (ENISE), DIPI Laboratory, 58 rue Jean Parot, 42023 Saint-Etienne cedex 2 (France); Smurov, I. [Ecole Nationale d' Ingenieurs de Saint-Etienne (ENISE), DIPI Laboratory, 58 rue Jean Parot, 42023 Saint-Etienne cedex 2 (France)], E-mail: smurov@enise.fr

    2009-03-31

    Direct metal deposition (DMD) is an automated 3D deposition process arising from laser cladding technology with co-axial powder injection to refine or refurbish parts. Recently DMD has been extended to manufacture large-size near-net-shape components. When applied for manufacturing new parts (or their refinement), DMD can provide tailored thermal properties, high corrosion resistance, tailored tribology, multifunctional performance and cost savings due to smart material combinations. In repair (refurbishment) operations, DMD can be applied for parts with a wide variety of geometries and sizes. In contrast to the current tool repair techniques such as tungsten inert gas (TIG), metal inert gas (MIG) and plasma welding, laser cladding technology by DMD offers a well-controlled heat-treated zone due to the high energy density of the laser beam. In addition, this technology may be used for preventative maintenance and design changes/up-grading. One of the advantages of DMD is the possibility to build functionally graded coatings (from 1 mm thickness and higher) and 3D multi-material objects (for example, 100 mm-sized monolithic rectangular) in a single-step manufacturing cycle by using up to 4-channel powder feeder. Approved materials are: Fe (including stainless steel), Ni and Co alloys, (Cu,Ni 10%), WC compounds, TiC compounds. The developed coatings/parts are characterized by low porosity (<1%), fine microstructure, and their microhardness is close to the benchmark value of wrought alloys after thermal treatment (Co-based alloy Stellite, Inox 316L, stainless steel 17-4PH). The intended applications concern cooling elements with complex geometry, friction joints under high temperature and load, light-weight mechanical support structures, hermetic joints, tubes with complex geometry, and tailored inside and outside surface properties, etc.

  20. Potential of direct metal deposition technology for manufacturing thick functionally graded coatings and parts for reactors components

    Science.gov (United States)

    Thivillon, L.; Bertrand, Ph.; Laget, B.; Smurov, I.

    2009-03-01

    Direct metal deposition (DMD) is an automated 3D deposition process arising from laser cladding technology with co-axial powder injection to refine or refurbish parts. Recently DMD has been extended to manufacture large-size near-net-shape components. When applied for manufacturing new parts (or their refinement), DMD can provide tailored thermal properties, high corrosion resistance, tailored tribology, multifunctional performance and cost savings due to smart material combinations. In repair (refurbishment) operations, DMD can be applied for parts with a wide variety of geometries and sizes. In contrast to the current tool repair techniques such as tungsten inert gas (TIG), metal inert gas (MIG) and plasma welding, laser cladding technology by DMD offers a well-controlled heat-treated zone due to the high energy density of the laser beam. In addition, this technology may be used for preventative maintenance and design changes/up-grading. One of the advantages of DMD is the possibility to build functionally graded coatings (from 1 mm thickness and higher) and 3D multi-material objects (for example, 100 mm-sized monolithic rectangular) in a single-step manufacturing cycle by using up to 4-channel powder feeder. Approved materials are: Fe (including stainless steel), Ni and Co alloys, (Cu,Ni 10%), WC compounds, TiC compounds. The developed coatings/parts are characterized by low porosity (<1%), fine microstructure, and their microhardness is close to the benchmark value of wrought alloys after thermal treatment (Co-based alloy Stellite, Inox 316L, stainless steel 17-4PH). The intended applications concern cooling elements with complex geometry, friction joints under high temperature and load, light-weight mechanical support structures, hermetic joints, tubes with complex geometry, and tailored inside and outside surface properties, etc.

  1. A magnificent team effort

    CERN Multimedia

    CERN Bulletin

    During the last weekend and this week, the LHC has accomplished many tasks: it first circulated two beams in opposite directions, then made them collide in the heart of the four giant detectors and finally slightly increased their energy. Virtual champagne for the hundreds of people working night and day to repair the machine, prepare it for the restart and finally operate it.   This shot of delighted operators with their eyes glued to screens showing the first circulating beams in the LHC was taken by the CERN Photolab and has been published in newspapers around the world.  The LHC is making the headlines of the world's press but the real emotion these days can be seen in the eyes of the machine operators in the CERN Control Centre (CCC) and has spread all around CERN. Of course, this is just the beginning and the LHC will have to accomplish more challenging tasks but these first moments were undoubtedly very intense, partly due to the fact that last year’s incident i...

  2. Development of prostate cancer research database with the clinical data warehouse technology for direct linkage with electronic medical record system.

    Science.gov (United States)

    Choi, In Young; Park, Seungho; Park, Bumjoon; Chung, Byung Ha; Kim, Choung-Soo; Lee, Hyun Moo; Byun, Seok-Soo; Lee, Ji Youl

    2013-01-01

    In spite of increased prostate cancer patients, little is known about the impact of treatments for prostate cancer patients and outcome of different treatments based on nationwide data. In order to obtain more comprehensive information for Korean prostate cancer patients, many professionals urged to have national system to monitor the quality of prostate cancer care. To gain its objective, the prostate cancer database system was planned and cautiously accommodated different views from various professions. This prostate cancer research database system incorporates information about a prostate cancer research including demographics, medical history, operation information, laboratory, and quality of life surveys. And, this system includes three different ways of clinical data collection to produce a comprehensive data base; direct data extraction from electronic medical record (EMR) system, manual data entry after linking EMR documents like magnetic resonance imaging findings and paper-based data collection for survey from patients. We implemented clinical data warehouse technology to test direct EMR link method with St. Mary's Hospital system. Using this method, total number of eligible patients were 2,300 from 1997 until 2012. Among them, 538 patients conducted surgery and others have different treatments. Our database system could provide the infrastructure for collecting error free data to support various retrospective and prospective studies.

  3. Technology certification and technology acceptance: Promoting interstate cooperation and market development for innovative technologies

    International Nuclear Information System (INIS)

    Brockbank, B.R.

    1995-03-01

    In the past two years, public and private efforts to promote development and deployment of innovative environmental technologies have shifted from the analysis of barriers to the implementation of a variety of initiatives aimed at surmounting those barriers. Particular attention has been directed at (1) streamlining fragmented technology acceptance processes within and among the states, and (2) alleviating disincentives, created by inadequate or unverified technology cost and performance data, for users and regulators to choose innovative technologies. Market fragmentation currently imposes significant cost burdens on technology developers and inhibits the investment of private capital in environmental technology companies. Among the responses to these problems are state and federal technology certification/validation programs, efforts to standardize cost/performance data reporting, and initiatives aimed at promoting interstate cooperation in technology testing and evaluation. This paper reviews the current status of these initiatives, identifies critical challenges to their success, and recommends strategies for addressing those challenges

  4. Aviation security : TSA is increasing procurement and deployment of the advanced imaging technology, but challenges to this effort and other areas of aviation security remain : testimony before the Subcommittee on Transportation Security and Infrastructur

    Science.gov (United States)

    2010-03-17

    The attempted bombing of Northwest flight 253 highlighted the importance of detecting improvised explosive devices on passengers. This testimony focuses on (1) the Transportation Security Administrations (TSA) efforts to procure and deploy advance...

  5. Comparative health technology assessment of robotic-assisted, direct manual laparoscopic and open surgery: a prospective study.

    Science.gov (United States)

    Turchetti, Giuseppe; Pierotti, Francesca; Palla, Ilaria; Manetti, Stefania; Freschi, Cinzia; Ferrari, Vincenzo; Cuschieri, Alfred

    2017-02-01

    Despite many publications reporting on the increased hospital cost of robotic-assisted surgery (RAS) compared to direct manual laparoscopic surgery (DMLS) and open surgery (OS), the reported health economic studies lack details on clinical outcome, precluding valid health technology assessment (HTA). The present prospective study reports total cost analysis on 699 patients undergoing general surgical, gynecological and thoracic operations between 2011 and 2014 in the Italian Public Health Service, during which period eight major teaching hospitals treated the patients. The study compared total healthcare costs of RAS, DMLS and OS based on prospectively collected data on patient outcome in addition to healthcare costs incurred by the three approaches. The cost of RAS operations was significantly higher than that of OS and DMLS for both gynecological and thoracic operations (p DMLS. Total costs of general surgery RAS were significantly higher than those of OS (p DMLS general surgery. Indirect costs were significantly lower in RAS compared to both DMLS general surgery and OS gynecological surgery due to the shorter length of hospital stay of RAS approach (p < 0.001). Additionally, in all specialties compared to OS, patients treated by RAS experienced a quicker recovery and significantly less pain during the hospitalization and after discharge. The present HTA while confirming higher total healthcare costs for RAS operations identified significant clinical benefits which may justify the increased expenditure incurred by this approach.

  6. Characterization of Cr-O cermet solar selective coatings deposited by using direct-current magnetron sputtering technology

    International Nuclear Information System (INIS)

    Lee, Kil Dong

    2006-01-01

    Cr-O (Cr-CrO) cermet solar selective coatings with a double cermet layer film structure were prepared by using a special direct-current (dc) magnetron sputtering technology. The typical film structure from the surface to the bottom substrate was an Al 2 O 3 anti-reflection layer on a double Cr-O cermet layer on an Al metal infrared reflection layer. The deposited Cr-O cermet solar selective coating had an absorptance of α = 0.93 - 0.95 and an emittance of ε = 0.09 - 0.10(100 .deg. C). The absorption layers of the Cr-O cermet coatings deposited on glass and silicon substrates were identified as being amorphous by using X-ray diffraction (XRD). Atomic force microscopy (AFM) showed that Cr-O cermet layers were very smooth and that their grain sizes were very small. The result of thermal stability test showed that the Cr-O cermet solar selective coating was stable for use at temperatures of under 400 .deg. C.

  7. Gender Gap in Science, Technology, Engineering, and Mathematics (STEM): Current Knowledge, Implications for Practice, Policy, and Future Directions.

    Science.gov (United States)

    Wang, Ming-Te; Degol, Jessica L

    2017-03-01

    Although the gender gap in math course-taking and performance has narrowed in recent decades, females continue to be underrepresented in math-intensive fields of Science, Technology, Engineering, and Mathematics (STEM). Career pathways encompass the ability to pursue a career as well as the motivation to employ that ability. Individual differences in cognitive capacity and motivation are also influenced by broader sociocultural factors. After reviewing research from the fields of psychology, sociology, economics, and education over the past 30 years, we summarize six explanations for US women's underrepresentation in math-intensive STEM fields: (a) cognitive ability, (b) relative cognitive strengths, (c) occupational interests or preferences, (d) lifestyle values or work-family balance preferences, (e) field-specific ability beliefs, and (f) gender-related stereotypes and biases. We then describe the potential biological and sociocultural explanations for observed gender differences on cognitive and motivational factors and demonstrate the developmental period(s) during which each factor becomes most relevant. We then propose evidence-based recommendations for policy and practice to improve STEM diversity and recommendations for future research directions.

  8. Rapid process development of chromatographic process using direct analysis in real time mass spectrometry as a process analytical technology tool.

    Science.gov (United States)

    Yan, Binjun; Chen, Teng; Xu, Zhilin; Qu, Haibin

    2014-06-01

    The concept of quality by design (QbD) is widely applied in the process development of pharmaceuticals. However, the additional cost and time have caused some resistance about QbD implementation. To show a possible solution, this work proposed a rapid process development method, which used direct analysis in real time mass spectrometry (DART-MS) as a process analytical technology (PAT) tool for studying the chromatographic process of Ginkgo biloba L., as an example. The breakthrough curves were fast determined by DART-MS at-line. A high correlation coefficient of 0.9520 was found between the concentrations of ginkgolide A determined by DART-MS and HPLC. Based on the PAT tool, the impacts of process parameters on the adsorption capacity were discovered rapidly, which showed a decreased adsorption capacity with the increase of the flow rate. This work has shown the feasibility and advantages of integrating PAT into QbD implementation for rapid process development. Copyright © 2014 Elsevier B.V. All rights reserved.

  9. Direct or Directed: Orchestrating a More Harmonious Approach to Teaching Technology within an Art & Design Higher Education Curriculum with Special Reference to Visual Communications Courses

    Science.gov (United States)

    Marshall, Lindsey; Meachem, Lester

    2007-01-01

    In this scoping study we have investigated the integration of subject-specific software into the structure of visual communications courses. There is a view that the response within visual communications courses to the rapid developments in technology has been linked to necessity rather than by design. Through perceptions of staff with day-to-day…

  10. Cognitive effort: A neuroeconomic approach

    Science.gov (United States)

    Braver, Todd S.

    2015-01-01

    Cognitive effort has been implicated in numerous theories regarding normal and aberrant behavior and the physiological response to engagement with demanding tasks. Yet, despite broad interest, no unifying, operational definition of cognitive effort itself has been proposed. Here, we argue that the most intuitive and epistemologically valuable treatment is in terms of effort-based decision-making, and advocate a neuroeconomics-focused research strategy. We first outline psychological and neuroscientific theories of cognitive effort. Then we describe the benefits of a neuroeconomic research strategy, highlighting how it affords greater inferential traction than do traditional markers of cognitive effort, including self-reports and physiologic markers of autonomic arousal. Finally, we sketch a future series of studies that can leverage the full potential of the neuroeconomic approach toward understanding the cognitive and neural mechanisms that give rise to phenomenal, subjective cognitive effort. PMID:25673005

  11. Fusion technology programme

    International Nuclear Information System (INIS)

    Finken, D.

    1984-10-01

    The KfK-Association has continued work on 17 R and D contracts of the Fusion Technology Programme. An effort of 94 manyears per year is at present contributed by 10 KfK departments, covering all aereas defined in the Fusion Technology Programme. The dominant part of the work is directed towards the need of the NET design or supporting experiments. Some additional effort addresses long term technological issues and system studies relevant to DEMO or confinement schemes alternative to tokamaks. Direct contribution to the NET team has increased by augmentation of NET study contracts and delegation of personnel, three KfK delegates being at present members of the NET team. In reverse, specifications and design guidelines worked out by NET have started to have an impact on the current R and D-work in the laboratory. (orig./GG)

  12. An Assistive Technology Design Framework for ADHD

    DEFF Research Database (Denmark)

    Sonne, Tobias; Marshall, Paul; Obel, Carsten

    2016-01-01

    In this paper, we present a design framework for ADHD assistive technologies that aims to give researchers grounding in the background research on the condition, to provide a lingua franca, and to highlight potential research directions for HCI researchers within assistive technology. The design ...... map existing assistive technologies and potential new research efforts to the framework concepts. This way we show how it is used to support and advance the research and development of novel assistive technologies for the ADHD domain....

  13. Expanding the experience of using non-stationary waterflooding technology with changing direction of the filtration flow in the example of the Northern Buzachi field

    Directory of Open Access Journals (Sweden)

    E.M. Almukhametova

    2018-06-01

    Full Text Available Abstract. The last few years, work has been carried out to study the effectiveness of non-stationary exposure in the highly viscous oil field Northern Buzachi (Republic of Kazakhstan. It has been proved that this technology is quite effective in the development of highly viscous oil reservoirs, however, in order to constantly maintain high technological effect, a constant modification of this technology is required, since it has a characteristic feature of rapid «aging». Further search for the conditions of effective application of non-stationary exposure on highly-viscous oil deposits can be carried out in two directions: the implementation of non-stationary exposure in new areas with other reservoir parameters and the change in the parameters of non-stationary exposure technology (including combining with other technologies in areas where this technology is already in use. Both approaches are used on the Northern Buzachi field. Thus, the positive experience of using non-stationary waterflooding in combination with changing direction of the filtration flow in the section of the seventh block of the Northern Buzachi field allowed us to recommend new sites for the implementation of this technology. With the participation of the author of this work, a non-stationary waterflooding program was developed and implemented on the site of the sixth block (south of the first operational facility.

  14. Multidisciplinary Efforts Driving Translational Theranostics

    Science.gov (United States)

    Hu, Tony Y.

    2014-01-01

    This themed issue summarizes significant efforts aimed at using “biological language” to discern between “friends” and “foes” in the context of theranostics for true clinical application. It is expected that the success of theranostics depends on multidisciplinary efforts, combined to expedite our understanding of host responses to “customized” theranostic agents and formulating individualized therapies. PMID:25285169

  15. Learning Environment and Student Effort

    Science.gov (United States)

    Hopland, Arnt O.; Nyhus, Ole Henning

    2016-01-01

    Purpose: The purpose of this paper is to explore the relationship between satisfaction with learning environment and student effort, both in class and with homework assignments. Design/methodology/approach: The authors use data from a nationwide and compulsory survey to analyze the relationship between learning environment and student effort. The…

  16. Respiratory effort from the photoplethysmogram.

    Science.gov (United States)

    Addison, Paul S

    2017-03-01

    The potential for a simple, non-invasive measure of respiratory effort based on the pulse oximeter signal - the photoplethysmogram or 'pleth' - was investigated in a pilot study. Several parameters were developed based on a variety of manifestations of respiratory effort in the signal, including modulation changes in amplitude, baseline, frequency and pulse transit times, as well as distinct baseline signal shifts. Thirteen candidate parameters were investigated using data from healthy volunteers. Each volunteer underwent a series of controlled respiratory effort maneuvers at various set flow resistances and respiratory rates. Six oximeter probes were tested at various body sites. In all, over three thousand pleth-based effort-airway pressure (EP) curves were generated across the various airway constrictions, respiratory efforts, respiratory rates, subjects, probe sites, and the candidate parameters considered. Regression analysis was performed to determine the existence of positive monotonic relationships between the respiratory effort parameters and resulting airway pressures. Six of the candidate parameters investigated exhibited a distinct positive relationship (poximeter probe and an ECG (P2E-Effort) and the other using two pulse oximeter probes placed at different peripheral body sites (P2-Effort); and baseline shifts in heart rate, (BL-HR-Effort). In conclusion, a clear monotonic relationship was found between several pleth-based parameters and imposed respiratory loadings at the mouth across a range of respiratory rates and flow constrictions. The results suggest that the pleth may provide a measure of changing upper airway dynamics indicative of the effort to breathe. Copyright © 2017 The Author. Published by Elsevier Ltd.. All rights reserved.

  17. Direct implantation of rapamycin-eluting stents with bioresorbable drug carrier technology utilising the Svelte coronary stent-on-a-wire: the DIRECT II study.

    Science.gov (United States)

    Verheye, Stefan; Khattab, Ahmed A; Carrie, Didier; Stella, Pieter; Slagboom, Ton; Bartunek, Jozef; Onuma, Yoshinobu; Serruys, Patrick W

    2016-08-05

    Our aim was to demonstrate the safety and efficacy of the Svelte sirolimus-eluting coronary stent-on-a-wire Integrated Delivery System (IDS) with bioresorbable drug coating compared to the Resolute Integrity zotarolimus-eluting stent with durable polymer in patients with de novo coronary artery lesions. Direct stenting, particularly in conjunction with transradial intervention (TRI), has been associated with reduced bleeding complications, procedure time, radiation exposure and contrast administration compared to conventional stenting with wiring and predilatation. The low-profile Svelte IDS is designed to facilitate TRI and direct stenting, reducing the number of procedural steps, time and cost associated with coronary stenting. DIRECT II was a prospective, multicentre trial which enrolled 159 patients to establish non-inferiority of the Svelte IDS versus Resolute Integrity using a 2:1 randomisation. The primary endpoint was angiographic in-stent late lumen loss (LLL) at six months. Target vessel failure (TVF), as well as secondary clinical endpoints, will be assessed annually up to five years. At six months, in-stent LLL was 0.09±0.31 mm in the Svelte IDS group compared to 0.13±0.27 mm in the Resolute Integrity group (p<0.001 for non-inferiority). TVF at one year was similar across the Svelte IDS and Resolute Integrity groups (6.5% vs. 9.8%, respectively). DIRECT II demonstrated the non-inferiority of the Svelte IDS to Resolute Integrity with respect to in-stent LLL at six months. Clinical outcomes at one year were comparable between the two groups.

  18. First Complete Genomic Sequence of a Rabies Virus from the Republic of Tajikistan Obtained Directly from a Flinders Technology Associates Card

    OpenAIRE

    Goharriz, H.; Marston, D. A.; Sharifzoda, F.; Ellis, R. J.; Horton, D. L.; Khakimov, T.; Whatmore, A.; Khamroev, K.; Makhmadshoev, A. N.; Bazarov, M.; Fooks, A. R.; Banyard, A. C.

    2017-01-01

    ABSTRACT A brain homogenate derived from a rabid dog in the district of Tojikobod, Republic of Tajikistan, was applied to a Flinders Technology Associates (FTA) card. A full-genome sequence of rabies virus (RABV) was generated from the FTA card directly without extraction, demonstrating the utility of these cards for readily obtaining genetic data.

  19. Students' Perceptions of Teacher Impact on Their Self-Directed Language Learning with Technology beyond the Classroom: Cases of Hong Kong and U.S.

    Science.gov (United States)

    Lai, Chun; Li, Xiaoshi; Wang, Qiu

    2017-01-01

    Teachers are important social agents who affect students' cognitive and social behaviors, including students' self-directed use of technology for language learning outside the classroom. However, how teachers influence student behaviors may vary across cultures, and understanding how teacher influences vary across different cultures is critical to…

  20. Toward Understanding the Role of Web 2.0 Technology in Self-Directed Learning and Job Performance in a Single Organizational Setting: A Qualitative Case Study

    Science.gov (United States)

    Caruso, Shirley J.

    2016-01-01

    This single instrumental qualitative case study explores and thickly describes job performance outcomes based upon the manner in which self-directed learning activities of a purposefully selected sample of 3 construction managers are conducted, mediated by the use of Web 2.0 technology. The data collected revealed that construction managers are…

  1. First Complete Genomic Sequence of a Rabies Virus from the Republic of Tajikistan Obtained Directly from a Flinders Technology Associates Card.

    Science.gov (United States)

    Goharriz, H; Marston, D A; Sharifzoda, F; Ellis, R J; Horton, D L; Khakimov, T; Whatmore, A; Khamroev, K; Makhmadshoev, A N; Bazarov, M; Fooks, A R; Banyard, A C

    2017-07-06

    A brain homogenate derived from a rabid dog in the district of Tojikobod, Republic of Tajikistan, was applied to a Flinders Technology Associates (FTA) card. A full-genome sequence of rabies virus (RABV) was generated from the FTA card directly without extraction, demonstrating the utility of these cards for readily obtaining genetic data. © Crown copyright 2017.

  2. Scalable Solution Processing of Pristine Carbon Nanotubes for Self-Assembled, Tunable Materials with Direct Application to Space Technologies

    Data.gov (United States)

    National Aeronautics and Space Administration — Current material technologies limit space exploration and vehicle performance due to often unnecessary mass increase from copper wiring or heavy structural...

  3. Effort rights-based management

    DEFF Research Database (Denmark)

    Squires, Dale; Maunder, Mark; Allen, Robin

    2017-01-01

    Effort rights-based fisheries management (RBM) is less widely used than catch rights, whether for groups or individuals. Because RBM on catch or effort necessarily requires a total allowable catch (TAC) or total allowable effort (TAE), RBM is discussed in conjunction with issues in assessing fish...... populations and providing TACs or TAEs. Both approaches have advantages and disadvantages, and there are trade-offs between the two approaches. In a narrow economic sense, catch rights are superior because of the type of incentives created, but once the costs of research to improve stock assessments...

  4. Directed technical change and the adoption of CO{sub 2} abatement technology. The case of CO{sub 2} capture and storage

    Energy Technology Data Exchange (ETDEWEB)

    Otto, Vincent M.; Reilly, John [Joint Program on the Science and Policy of Global Change, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139 (United States)

    2008-11-15

    This paper studies the cost-effectiveness of combining traditional environmental policy, such as CO{sub 2}-trading schemes, and technology policy that has aims of reducing the cost and speeding the adoption of CO{sub 2} abatement technology. For this purpose, we develop a dynamic general equilibrium model that captures empirical links between CO{sub 2} emissions associated with energy use, directed technical change and the economy. We specify CO{sub 2} capture and storage (CCS) as a discrete CO{sub 2} abatement technology. We find that combining CO{sub 2}-trading schemes with an adoption subsidy is the most effective instrument to induce adoption of the CCS technology. Such a subsidy directly improves the competitiveness of the CCS technology by compensating for its markup over the cost of conventional electricity. Yet, introducing R and D subsidies throughout the entire economy leads to faster adoption of the CCS technology as well and in addition can be cost-effective in achieving the abatement target. (author)

  5. DIRECTIONS OF PREPARATION OF FUTURE TEACHERS TO THE USE OF DISTANCE LEARNING TECHNOLOGIES IN PROFESSIONAL ACTIVITY (PRAXIOLOGICAL ASPECT OF THE ACTIVITY APPROACH

    Directory of Open Access Journals (Sweden)

    Tatyana A. Boronenko

    2015-01-01

    Full Text Available The aim of the article is to demonstrate the need of preparing future teachers to use distance learning technologies in the professional activities. Introduction in educational process of distance learning technologies contributes to improving the quality of education. Methods. The authors’ technique of preparation of students of pedagogical specialities to work in the information-educational environment is designed on the basis of the analysis and generalisation of numerous scientific publications. Results. The system of training to implementation of the distance learning technologies in the teaching activity is developed and described, consisting of the following directions: realisation within the program of the principal educational program of specialised training courses in variable-based curriculum parts; the organisation of educational and research activity of students with the use of distance learning technologies; classroom-based and extracurricular independent work of students directed to designing of teaching and learning aids and materials on the basis of distance learning technologies; application of elements of distance learning technologies for students’ teaching; attraction of students to formation of corpus of multimedia educational resources of university. The purposes, the content and expected results of each direction are specified. Scientific novelty. The authors point out that concrete scientifically wellfounded methodical recommendations for the future teachers on implementation of distance learning technologies haven’t been presented in the Russian literature till now; despite an abundance of scientifically-information sources of distance learning technologies and sufficiently high-leveled degree knowledge of the issues of its efficiency in educational activity, conditions of introduction of such technologies in high school, construction of models of distance training. Authors of article have tried to close this

  6. Pandemic Influenza: Domestic Preparedness Efforts

    National Research Council Canada - National Science Library

    Lister, Sarah A

    2005-01-01

    .... Though influenza pandemics occur with some regularity, and the United States has been involved in specific planning efforts since the early 1990s, the H5N1 situation has created a sense of urgency...

  7. Effort Estimation in BPMS Migration

    OpenAIRE

    Drews, Christopher; Lantow, Birger

    2018-01-01

    Usually Business Process Management Systems (BPMS) are highly integrated in the IT of organizations and are at the core of their business. Thus, migrating from one BPMS solution to another is not a common task. However, there are forces that are pushing organizations to perform this step, e.g. maintenance costs of legacy BPMS or the need for additional functionality. Before the actual migration, the risk and the effort must be evaluated. This work provides a framework for effort estimation re...

  8. Weight-loss study in African-American Women: lessons learned from project take HEED and future, technologically enhanced directions.

    Science.gov (United States)

    Murphy, Pamala J; Williams, Roger L

    2013-01-01

    African-American women are more overweight and have greater difficulty maintaining weight loss than do Caucasian women. Evidence suggests that African-American women are more successful with culturally tailored weight-loss programs. Begun in 2005, an 18-month randomized clinical trial, Project Take HEED (Healthy Eating and Exercise Decisions), culturally adapted an evidence-based dietary approach and exercise program to fit the female African-American population in an attempt to improve program attrition rates. The study was conducted with 223 African-American women (120 women in the experimental group; 103 controls), age 35 to 65 years, with a body mass index of 30 kg/m(2) or higher. The experimental group received education and instruction at 24 group sessions and were asked to record their daily food intake and physical activity. Cultural adaptation included social and spiritual components. Controls received usual care (referral to a dietitian). After 18 months, Project Take HEED demonstrated the following outcomes: ATTRITION: the treatment group consisted of 12 African-American women at the end of month 18-(an attrition rate of 87%). (It had been 70% at the end of month 15.)FACTORS CONTRIBUTING TO ATTRITION INCLUDED: caregiver responsibilities, transportation difficulties, work schedules, and others. Those clients that did remain, however, provided the impetus for our next study. The remaining participants had, by and large, begun the study as being low in self-efficacy regarding weight loss and weight loss maintenance. Initial Findings: The high self-efficacy that some women had at the beginning of the intervention did not translate into the desired behavior change. The inverse relationship seen in this study suggests that treatments that improve participants' self-efficacy may result in greater weight loss. New Directions: A new study, commencing in 2013, will use at-home Web-based and virtual reality technology (avatars) in an attempt to enhance client

  9. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  10. AMRDEC's HWIL Synthetic Environment Development Efforts for LADAR Sensors

    National Research Council Canada - National Science Library

    Kim, Hajin J; Cornell, Michael C; Naumann, Charles B

    2004-01-01

    .... With the emerging sensor/electronics technology LADAR sensors are becoming more viable option as an integral part of weapon systems, and AMCOM has been expending efforts to develop the capabilities...

  11. Effort in Multitasking: Local and Global Assessment of Effort.

    Science.gov (United States)

    Kiesel, Andrea; Dignath, David

    2017-01-01

    When performing multiple tasks in succession, self-organization of task order might be superior compared to external-controlled task schedules, because self-organization allows optimizing processing modes and thus reduces switch costs, and it increases commitment to task goals. However, self-organization is an additional executive control process that is not required if task order is externally specified and as such it is considered as time-consuming and effortful. To compare self-organized and externally controlled task scheduling, we suggest assessing global subjective and objectives measures of effort in addition to local performance measures. In our new experimental approach, we combined characteristics of dual tasking settings and task switching settings and compared local and global measures of effort in a condition with free choice of task sequence and a condition with cued task sequence. In a multi-tasking environment, participants chose the task order while the task requirement of the not-yet-performed task remained the same. This task preview allowed participants to work on the previously non-chosen items in parallel and resulted in faster responses and fewer errors in task switch trials than in task repetition trials. The free-choice group profited more from this task preview than the cued group when considering local performance measures. Nevertheless, the free-choice group invested more effort than the cued group when considering global measures. Thus, self-organization in task scheduling seems to be effortful even in conditions in which it is beneficiary for task processing. In a second experiment, we reduced the possibility of task preview for the not-yet-performed tasks in order to hinder efficient self-organization. Here neither local nor global measures revealed substantial differences between the free-choice and a cued task sequence condition. Based on the results of both experiments, we suggest that global assessment of effort in addition to

  12. Comparison of cardiovascular response to combined static-dynamic effort, postprandial dynamic effort and dynamic effort alone in patients with chronic ischemic heart disease

    International Nuclear Information System (INIS)

    Hung, J.; McKillip, J.; Savin, W.; Magder, S.; Kraus, R.; Houston, N.; Goris, M.; Haskell, W.; DeBusk, R.

    1982-01-01

    The cardiovascular responses to combined static-dynamic effort, postprandial dynamic effort and dynamic effort alone were evaluated by upright bicycle ergometry during equilibrium-gated blood pool scintigraphy in 24 men, mean age 59 +/- 8 years, with chronic ischemic heart disease. Combined static-dynamic effort and the postprandial state elicited a peak cardiovascular response similar to that of dynamic effort alone. Heart rate, intraarterial systolic and diastolic pressures, rate-pressure product and ejection fraction were similar for the three test conditions at the onset of ischemia and at peak effort. The prevalence and extent of exercise-induced ischemic left ventricular dysfunction, ST-segment depression, angina pectoris and ventricular ectopic activity were also similar during the three test conditions. Direct and indirect measurements of systolic and diastolic blood pressure were highly correlated. The onset of ischemic ST-segment depression and angina pectoris correlated as strongly with heart rate alone as with the rate-pressure product during all three test conditions. The cardiovascular response to combined static-dynamic effort and to postprandial dynamic effort becomes more similar to that of dynamic effort alone as dynamic effort reaches a symptom limit. If significant ischemic and arrhythmic abnormalities are absent during symptom-limited dynamic exercise testing, they are unlikely to appear during combined static-dynamic or postprandial dynamic effort

  13. Measuring listening effort: driving simulator versus simple dual-task paradigm.

    Science.gov (United States)

    Wu, Yu-Hsiang; Aksan, Nazan; Rizzo, Matthew; Stangl, Elizabeth; Zhang, Xuyang; Bentler, Ruth

    2014-01-01

    The dual-task paradigm has been widely used to measure listening effort. The primary objectives of the study were to (1) investigate the effect of hearing aid amplification and a hearing aid directional technology on listening effort measured by a complicated, more real world dual-task paradigm and (2) compare the results obtained with this paradigm to a simpler laboratory-style dual-task paradigm. The listening effort of adults with hearing impairment was measured using two dual-task paradigms, wherein participants performed a speech recognition task simultaneously with either a driving task in a simulator or a visual reaction-time task in a sound-treated booth. The speech materials and road noises for the speech recognition task were recorded in a van traveling on the highway in three hearing aid conditions: unaided, aided with omnidirectional processing (OMNI), and aided with directional processing (DIR). The change in the driving task or the visual reaction-time task performance across the conditions quantified the change in listening effort. Compared to the driving-only condition, driving performance declined significantly with the addition of the speech recognition task. Although the speech recognition score was higher in the OMNI and DIR conditions than in the unaided condition, driving performance was similar across these three conditions, suggesting that listening effort was not affected by amplification and directional processing. Results from the simple dual-task paradigm showed a similar trend: hearing aid technologies improved speech recognition performance, but did not affect performance in the visual reaction-time task (i.e., reduce listening effort). The correlation between listening effort measured using the driving paradigm and the visual reaction-time task paradigm was significant. The finding showing that our older (56 to 85 years old) participants' better speech recognition performance did not result in reduced listening effort was not

  14. Summary of process research analysis efforts

    Science.gov (United States)

    Burger, D. R.

    1985-01-01

    A summary of solar-cell process research analysis efforts was presented. Process design and cell design are interactive efforts where technology from integrated circuit processes and other processes are blended. The primary factors that control cell efficiency are: (1) the bulk parameters of the available sheet material, (2) the retention and enhancement of these bulk parameters, and (3) the cell design and the cost to produce versus the finished cells performance. The process sequences need to be tailored to be compatible with the sheet form, the cell shape form, and the processing equipment. New process options that require further evaluation and utilization are lasers, robotics, thermal pulse techniques, and new materials. There are numerous process control techniques that can be adapted and used that will improve product uniformity and reduced costs. Two factors that can lead to longer life modules are the use of solar cell diffusion barriers and improved encapsulation.

  15. Maximum effort in the minimum-effort game

    Czech Academy of Sciences Publication Activity Database

    Engelmann, Dirk; Normann, H.-T.

    2010-01-01

    Roč. 13, č. 3 (2010), s. 249-259 ISSN 1386-4157 Institutional research plan: CEZ:AV0Z70850503 Keywords : minimum-effort game * coordination game * experiments * social capital Subject RIV: AH - Economics Impact factor: 1.868, year: 2010

  16. 3D technology of Sony Bloggie has no advantage in decision-making of tennis serve direction: A randomized placebo-controlled study.

    Science.gov (United States)

    Liu, Sicong; Ritchie, Jason; Sáenz-Moncaleano, Camilo; Ward, Savanna K; Paulsen, Cody; Klein, Tyler; Gutierrez, Oscar; Tenenbaum, Gershon

    2017-06-01

    This study aimed at exploring whether 3D technology enhances tennis decision-making under the conceptual framework of human performance model. A 3 (skill-level: varsity, club, recreational) × 3 (experimental condition: placebo, weak 3D [W3D], strong 3D [S3D]) between-participant design was used. Allocated to experimental conditions by a skill-level stratified randomization, 105 tennis players judged tennis serve direction from video scenarios and rated their perceptions of enjoyment, flow, and presence during task performance. Results showed that varsity players made more accurate decisions than less skilled ones. Additionally, applying 3D technology to typical video displays reduced tennis players' decision-making accuracy, although wearing the 3D glasses led to a placebo effect that shortened the decision-making reaction time. The unexpected negative effect of 3D technology on decision-making was possibly due to participants being more familiar to W3D than to S3D, and relatedly, a suboptimal task-technology match. Future directions for advancing this area of research are offered. Highlights 3D technology augments binocular depth cues to tradition video displays, and thus results in the attainment of more authentic visual representation. This process enhances task fidelity in researching perceptual-cognitive skills in sports. The paper clarified both conceptual and methodological difficulties in testing 3D technology in sports settings. Namely, the nomenclature of video footage (with/without 3D technology) and the possible placebo effect (arising from wearing glasses of 3D technology) merit researchers' attention. Participants varying in level of domain-specific expertise were randomized into viewing conditions using a placebo-controlled design. Measurement consisted of both participants' subjective experience (i.e., presence, flow, and enjoyment) and objective performance (i.e., accuracy and reaction time) in a decision-making task. Findings revealed that

  17. ASME Code Efforts Supporting HTGRs

    Energy Technology Data Exchange (ETDEWEB)

    D.K. Morton

    2012-09-01

    In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

  18. ASME Code Efforts Supporting HTGRs

    Energy Technology Data Exchange (ETDEWEB)

    D.K. Morton

    2011-09-01

    In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

  19. Effort Estimation in BPMS Migration

    Directory of Open Access Journals (Sweden)

    Christopher Drews

    2018-04-01

    Full Text Available Usually Business Process Management Systems (BPMS are highly integrated in the IT of organizations and are at the core of their business. Thus, migrating from one BPMS solution to another is not a common task. However, there are forces that are pushing organizations to perform this step, e.g. maintenance costs of legacy BPMS or the need for additional functionality. Before the actual migration, the risk and the effort must be evaluated. This work provides a framework for effort estimation regarding the technical aspects of BPMS migration. The framework provides questions for BPMS comparison and an effort evaluation schema. The applicability of the framework is evaluated based on a simplified BPMS migration scenario.

  20. Testosterone and reproductive effort in male primates.

    Science.gov (United States)

    Muller, Martin N

    2017-05-01

    Considerable evidence suggests that the steroid hormone testosterone mediates major life-history trade-offs in vertebrates, promoting mating effort at the expense of parenting effort or survival. Observations from a range of wild primates support the "Challenge Hypothesis," which posits that variation in male testosterone is more closely associated with aggressive mating competition than with reproductive physiology. In both seasonally and non-seasonally breeding species, males increase testosterone production primarily when competing for fecund females. In species where males compete to maintain long-term access to females, testosterone increases when males are threatened with losing access to females, rather than during mating periods. And when male status is linked to mating success, and dependent on aggression, high-ranking males normally maintain higher testosterone levels than subordinates, particularly when dominance hierarchies are unstable. Trade-offs between parenting effort and mating effort appear to be weak in most primates, because direct investment in the form of infant transport and provisioning is rare. Instead, infant protection is the primary form of paternal investment in the order. Testosterone does not inhibit this form of investment, which relies on male aggression. Testosterone has a wide range of effects in primates that plausibly function to support male competitive behavior. These include psychological effects related to dominance striving, analgesic effects, and effects on the development and maintenance of the armaments and adornments that males employ in mating competition. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. Afghanistans Information and Communications Technology Sector: U.S. Agencies Obligated Over $2.6 Billion to the Sector, but the Full Scope of U.S. Efforts is Unknown

    Science.gov (United States)

    2016-07-01

    collect taxes and tariffs, and manage and allocate telecommunications spectrum. Prior to 2005, the Afghanistan Telecom Regulatory Authority had...is Afghanistan’s greatest source of foreign direct investment, largest remitter of taxes to the government, and largest licit employer. According to...amount of physical infrastructure, having inherited most Afghan telecommunications infrastructure contributed by the United States and other ICT

  2. Using Remotely Sensed Data for Climate Change Mitigation and Adaptation: A Collaborative Effort Between the Climate Change Adaptation Science Investigators Workgroup (CASI), NASA Johnson Space Center, and Jacobs Technology

    Science.gov (United States)

    Jagge, Amy

    2016-01-01

    With ever changing landscapes and environmental conditions due to human induced climate change, adaptability is imperative for the long-term success of facilities and Federal agency missions. To mitigate the effects of climate change, indicators such as above-ground biomass change must be identified to establish a comprehensive monitoring effort. Researching the varying effects of climate change on ecosystems can provide a scientific framework that will help produce informative, strategic and tactical policies for environmental adaptation. As a proactive approach to climate change mitigation, NASA tasked the Climate Change Adaptation Science Investigators Workgroup (CASI) to provide climate change expertise and data to Center facility managers and planners in order to ensure sustainability based on predictive models and current research. Generation of historical datasets that will be used in an agency-wide effort to establish strategies for climate change mitigation and adaptation at NASA facilities is part of the CASI strategy. Using time series of historical remotely sensed data is well-established means of measuring change over time. CASI investigators have acquired multispectral and hyperspectral optical and LiDAR remotely sensed datasets from NASA Earth Observation Satellites (including the International Space Station), airborne sensors, and astronaut photography using hand held digital cameras to create a historical dataset for the Johnson Space Center, as well as the Houston and Galveston area. The raster imagery within each dataset has been georectified, and the multispectral and hyperspectral imagery has been atmospherically corrected. Using ArcGIS for Server, the CASI-Regional Remote Sensing data has been published as an image service, and can be visualized through a basic web mapping application. Future work will include a customized web mapping application created using a JavaScript Application Programming Interface (API), and inclusion of the CASI data

  3. Effort problem of chemical pipelines

    Energy Technology Data Exchange (ETDEWEB)

    Okrajni, J.; Ciesla, M.; Mutwil, K. [Silesian Technical University, Katowice (Poland)

    1998-12-31

    The problem of the technical state assessment of the chemical pipelines working under mechanical and thermal loading has been shown in the paper. The pipelines effort after the long time operating period has been analysed. Material geometrical and loading conditions of the crack initiation and crack growth process in the chosen object has been discussed. Areas of the maximal effort have been determined. The material structure charges after the long time operating period have been described. Mechanisms of the crack initiation and crack growth in the pipeline elements have been analysed and mutual relations between the chemical and mechanical influences have been shown. (orig.) 16 refs.

  4. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  5. Directed Technical Change and Economic Growth Effects of Environmental Policy

    DEFF Research Database (Denmark)

    Kruse-Andersen, Peter Kjær

    2016-01-01

    A Schumpeterian growth model is developed to investigate how environmental policy affects economic growth when environmental policy also affects the direction of technical change. In contrast to previous models, production and pollution abatement technologies are embodied in separate intermediate...... unambiguously directs research efforts toward pollution abatement technologies and away from production technologies. This directed technical change reduces economic growth and pollution emission growth. Simulation results indicate that even large environmental policy reforms have small economic growth effects....... However, these economic growth effects have relatively large welfare effects which suggest that static models and exogenous growth models leave out an important welfare effect of environmental policy....

  6. DEFINITION OF PERSPECTIVE DIRECTIONS OF TRANSFERT OF TECHNOLOGIES AT THE BASE OF SWOT-ANALYSIS OF SCIENTIFIC ORGANIZATION

    OpenAIRE

    A.F. Suhovey

    2008-01-01

    This article describes approbating at Sverdlovsk region methodic of analysis of strength and weakness sides of scientific organization. Using this methodic is give possibility to define perspective directions of foundation innovation infrastructure of region.

  7. DEFINITION OF PERSPECTIVE DIRECTIONS OF TRANSFERT OF TECHNOLOGIES AT THE BASE OF SWOT-ANALYSIS OF SCIENTIFIC ORGANIZATION

    Directory of Open Access Journals (Sweden)

    A.F. Suhovey

    2008-12-01

    Full Text Available This article describes approbating at Sverdlovsk region methodic of analysis of strength and weakness sides of scientific organization. Using this methodic is give possibility to define perspective directions of foundation innovation infrastructure of region.

  8. Flicker noise comparison of direct conversion mixers using Schottky and HBT dioderings in SiGe:C BiCMOS technology

    DEFF Research Database (Denmark)

    Michaelsen, Rasmus Schandorph; Johansen, Tom Keinicke; Tamborg, Kjeld

    2015-01-01

    In this paper, we present flicker noise measurements of two X-band direct conversion mixers implemented in a SiGe:C BiCMOS technology. Both mixers use a ring structure with either Schottky diodes or diode-connected HBTs for double balanced operation. The mixers are packaged in a metal casing on a...... circuit demonstrates a 1/f noise corner frequency around 10 kHz....

  9. Reproductive effort in viscous populations

    NARCIS (Netherlands)

    Pen, Ido

    Here I study a kin selection model of reproductive effort, the allocation of resources to fecundity versus survival, in a patch-structured population. Breeding females remain in the same patch for life. Offspring have costly, partial long-distance dispersal and compete for breeding sites, which

  10. Competence formation of engineering directions students in the field of energy saving as a way to create new generation technologies

    Science.gov (United States)

    Gilmanshin, I. R.; Gilmanshina, S. I.

    2017-09-01

    The urgency of the formation of competence in the field of energy saving in the process of studying engineering and technical disciplines at the university is substantiated. The author’s definition of the competence in the field of energy saving is given, allowing to consider the necessity of its formation among students - future engineers as a way to create technologies of a new generation. The essence of this competence is revealed. The system of work, pedagogical conditions and technologies of its formation in the conditions of the federal university is substantiated.

  11. An overview of NASA's activities in micro-nano technologies

    Science.gov (United States)

    Stocky, J. F.

    2000-01-01

    An examination of how mass is used in spacecraft design indicates that technology efforts directed only to reduce the mass of electronics, both digital and analog will not significantly reduce the mass of a spacecraft, regardless of how much success those efforts achieve.

  12. Implementation of the national desalination and water purification technology roadmap : structuring and directing the development of water supply solutions.

    Energy Technology Data Exchange (ETDEWEB)

    Price, Kevin M.; Dorsey, Zachary; Miller, G. Wade; Brady, Patrick Vane; Mulligan, Conrad; Rayburn, Chris

    2006-06-01

    In the United States, economic growth increasingly requires that greater volumes of freshwater be made available for new users, yet supplies of freshwater are already allocated to existing users. Currently, water for new users is made available through re-allocation of xisting water supplies-for example, by cities purchasing agricultural water rights. Water may also be made available through conservation efforts and, in some locales, through the development of ''new'' water from non-traditional sources such as the oceans, deep aquifer rackish groundwater, and water reuse.

  13. Determining the directions of increasing the innovative potential of the region by developing innovative technologies and competences when preparing and implementing large investment projects

    Directory of Open Access Journals (Sweden)

    Timur V. Kramin

    2015-12-01

    Full Text Available Objective to determine the directions of increasing the innovative potential of a region through the development of innovative technologies and competences in the process of preparation and implementation of large investment projects in the Republic of Tatarstan. Methods methodology of project management institutional approach. Results it is proved that the main largescale directions of innovative potential development in the Republic of Tatarstan as a result of preparation and implementing of Universiade 2013 in Kazan are knowledge management information technologies risk management. It is shown that in the framework of the considered innovative areas a complete system was formed of competences of employees and managers in the fields of education trade hospitality and service. Scientific novelty the key directions were defined of increasing the innovative potential of a region through the development of innovative technologies and competences in the process of preparation and implementation of large investment projects by the example of the World Summer Student Games in Kazan in 2013. Practical significance on the basis of specific examples the authors illustrate the practiceoriented mechanism of innovative potential development of a region as a result of implementation of large investment projects. nbsp

  14. Gender Gap in Science, Technology, Engineering, and Mathematics (STEM): Current Knowledge, Implications for Practice, Policy, and Future Directions

    Science.gov (United States)

    Wang, Ming-Te; Degol, Jessica L.

    2017-01-01

    Although the gender gap in math course-taking and performance has narrowed in recent decades, females continue to be underrepresented in math-intensive fields of Science, Technology, Engineering, and Mathematics (STEM). Career pathways encompass the ability to pursue a career as well as the motivation to employ that ability. Individual differences…

  15. Information and Communication Technology to Facilitate Learning for Students in the Health Professions: Current Uses, Gaps, and Future Directions

    Science.gov (United States)

    Costello, Ellen; Corcoran, Mary; Barnett, Jacqueline S.; Birkmeier, Marisa; Cohn, Rhea; Ekmekci, Ozgur; Falk, Nancy L.; Harrod, Thomas; Herrmann, Debra; Robinson, Sean; Walker, Bryan

    2014-01-01

    Changes in the U.S. Healthcare System along with the need for institutions of higher education to prepare a work force ready to address the challenges of today and tomorrow have highlighted the need to incorporate technology in its broadest sense as part of the student learning experience. In health professional education, this becomes challenging…

  16. OVERVIEW OF THE HISTORY, PRESENT STATUS, AND FUTURE DIRECTION OF SOLIDIFICATION/STABILIZATION TECHNOLOGIES FOR HAZARDOUS WASTE TREATMENT

    Science.gov (United States)

    Solidification/stabilization (S/S) technology processes are currently being utilized in the United States to treat inorganic and organic hazardous waste and radioactive waste. These wastes are generated from operating industry or have resulted from the uncontrolled management of ...

  17. Directed polymers versus directed percolation

    Science.gov (United States)

    Halpin-Healy, Timothy

    1998-10-01

    Universality plays a central role within the rubric of modern statistical mechanics, wherein an insightful continuum formulation rises above irrelevant microscopic details, capturing essential scaling behaviors. Nevertheless, occasions do arise where the lattice or another discrete aspect can constitute a formidable legacy. Directed polymers in random media, along with its close sibling, directed percolation, provide an intriguing case in point. Indeed, the deep blood relation between these two models may have sabotaged past efforts to fully characterize the Kardar-Parisi-Zhang universality class, to which the directed polymer belongs.

  18. EPA/DOE joint efforts on mixed waste treatment

    International Nuclear Information System (INIS)

    Lee, C.C.; Huffman, G.L.; Nalesnik, R.P.

    1995-01-01

    Under the requirements of the Federal Facility Compliance Act (FFCA), the Department of Energy (DOE) is directed to develop treatment plans for their stockpile of wastes generated at their various sites. As a result, DOE is facing the monumental problem associated with the treatment and ultimate disposal of their mixed (radioactive and hazardous) waste. Meanwhile, the Environmental Protection Agency (EPA) issued a final open-quotes Hazardous Waste Combustion Strategyclose quotes in November 1994. Under the Combustion Strategy, EPA permit writers have been given the authority to use the Omnibus Provision of the Resource Conservation and Recovery Act (RCRA) to impose more stringent emission limits for waste combustors prior to the development of new regulations. EPA and DOE established a multi-year Interagency Agreement (IAG) in 1991. The main objective of the IAG (and of the second IAG that was added in 1993) is to conduct a research program on thermal technologies for treating mixed waste and to establish permit procedures for these technologies particularly under the new requirements of the above-mentioned EPA Combustion Strategy. The objective of this Paper is to summarize the results of the EPA/DOE joint efforts on mixed waste treatment since the establishment of the original Interagency Agreement. Specifically, this Paper will discuss six activities that have been underway; namely: (1) National Technical Workgroup (NTW) on Mixed Waste Treatment, (2) State-of-the-Art Assessment of APC (Air Pollution Control) and Monitoring Technologies for the Rocky Flats Fluidized Bed Unit, (3) Initial Study of Permit open-quotes Roadmapclose quotes Development for Mixed Waste Treatment, (4) Risk Assessment Approach for a Mixed Waste Thermal Treatment Facility, (5) Development and Application of Technology Selection Criteria for Mixed Waste Thermal Treatment, and (6) Performance Testing of Mixed Waste Incineration: In-Situ Chlorine Capture in a Fluidized Bed Unit

  19. Duke Power's liquid radwaste processing improvement efforts

    International Nuclear Information System (INIS)

    Baker, R.E. Jr.; Bramblett, J.W.

    1995-01-01

    The rising cost of processing liquid radwaste and industry efforts to reduce offsite isotopic contributions has drawn greater attention to the liquid radwaste area. Because of economic pressures to reduce cost and simultaneously improve performance, Duke Power has undertaken a wide ranging effort to cost effectively achieve improvements in the liquid radwaste processing area. Duke Power has achieved significant reductions over recent years in the release of curies to the environment from the Liquid Radwaste Treatmentt systems at its Catawba, McGuire, and Oconee stations. System wide site curie reductions of 78% have been achieved in a 3 year period. These curie reductions have been achieved while simultaneously reducing the amount of media used to accomplish treatment. The curie and media usage reductions have been achieved at low capital cost expenditures. A large number of approaches and projects have been used to achieve these curie and media usage reductions. This paper will describe the various projects and the associated results for Duke Power's processing improvement efforts. The subjects/projects which will be described include: (1) Cooperative philosophy between stations (2) Source Control (3) Processing Improvements (4) Technology Testing

  20. Nanopore sequencing technology and tools for genome assembly: computational analysis of the current state, bottlenecks and future directions.

    Science.gov (United States)

    Senol Cali, Damla; Kim, Jeremie S; Ghose, Saugata; Alkan, Can; Mutlu, Onur

    2018-04-02

    Nanopore sequencing technology has the potential to render other sequencing technologies obsolete with its ability to generate long reads and provide portability. However, high error rates of the technology pose a challenge while generating accurate genome assemblies. The tools used for nanopore sequence analysis are of critical importance, as they should overcome the high error rates of the technology. Our goal in this work is to comprehensively analyze current publicly available tools for nanopore sequence analysis to understand their advantages, disadvantages and performance bottlenecks. It is important to understand where the current tools do not perform well to develop better tools. To this end, we (1) analyze the multiple steps and the associated tools in the genome assembly pipeline using nanopore sequence data, and (2) provide guidelines for determining the appropriate tools for each step. Based on our analyses, we make four key observations: (1) the choice of the tool for basecalling plays a critical role in overcoming the high error rates of nanopore sequencing technology. (2) Read-to-read overlap finding tools, GraphMap and Minimap, perform similarly in terms of accuracy. However, Minimap has a lower memory usage, and it is faster than GraphMap. (3) There is a trade-off between accuracy and performance when deciding on the appropriate tool for the assembly step. The fast but less accurate assembler Miniasm can be used for quick initial assembly, and further polishing can be applied on top of it to increase the accuracy, which leads to faster overall assembly. (4) The state-of-the-art polishing tool, Racon, generates high-quality consensus sequences while providing a significant speedup over another polishing tool, Nanopolish. We analyze various combinations of different tools and expose the trade-offs between accuracy, performance, memory usage and scalability. We conclude that our observations can guide researchers and practitioners in making conscious

  1. European ErP Directive. Total condensing technology: the solution for heating and DHW units in the hotel sector

    International Nuclear Information System (INIS)

    Martín, G.

    2016-01-01

    Since 26 September 2015, the Ecodesign ErP Directive has been of compulsory application for EU Member States as regards the design of Energy-related Products (ErP) and as from its entry into force only those products manufactured according to the ErP requirements can be sold with the EC label. Although this directive affects over 1,000 product categories, for those relating to HVAC and DHW production, it covers boilers, heat pumps, accumulators, cogeneration systems, combined products systems, establishing their minimum efficiency levels, the maximum levels of NOX emissions, the minimum insulation for accumulators and the maximum level of acoustic emissions for heat pumps. (Author)

  2. Application of nanodisc technology for direct electrochemical investigation of plant cytochrome P450s and their NADPH P450 oxidoreductase

    DEFF Research Database (Denmark)

    Bavishi, Krutika; Laursen, Tomas; Martinez, Karen Laurence

    2016-01-01

    Direct electrochemistry of cytochrome P450 containing systems has primarily focused on investigating enzymes from microbes and animals for bio-sensing applications. Plant P450s receive electrons from NADPH P450 oxidoreductase (POR) to orchestrate the bio-synthesis of a plethora of commercially...... was electro-catalytically active while the P450s generated hydrogen peroxide (H2O2). These nanodisc-based investigations lay the prospects and guidelines for construction of a simplified platform to perform mediator-free, direct electrochemistry of non-engineered cytochromes P450 under native-like conditions...

  3. Effort variation regularization in sound field reproduction

    DEFF Research Database (Denmark)

    Stefanakis, Nick; Jacobsen, Finn; Sarris, Ioannis

    2010-01-01

    In this paper, active control is used in order to reproduce a given sound field in an extended spatial region. A method is proposed which minimizes the reproduction error at a number of control positions with the reproduction sources holding a certain relation within their complex strengths......), and adaptive wave field synthesis (AWFS), both under free-field conditions and in reverberant rooms. It is shown that effort variation regularization overcomes the problems associated with small spaces and with a low ratio of direct to reverberant energy, improving thus the reproduction accuracy...

  4. A Comprehensive Study of Key Electric Vehicle (EV) Components, Technologies, Challenges, Impacts, and Future Direction of Development

    OpenAIRE

    Fuad Un-Noor; Sanjeevikumar Padmanaban; Lucian Mihet-Popa; Mohammad Nurunnabi Mollah; Eklas Hossain

    2017-01-01

    Electric vehicles (EV), including Battery Electric Vehicle (BEV), Hybrid Electric Vehicle (HEV), Plug-in Hybrid Electric Vehicle (PHEV), Fuel Cell Electric Vehicle (FCEV), are becoming more commonplace in the transportation sector in recent times. As the present trend suggests, this mode of transport is likely to replace internal combustion engine (ICE) vehicles in the near future. Each of the main EV components has a number of technologies that are currently in use or can become prominent in...

  5. Review of Design of Speech Recognition and Text Analytics based Digital Banking Customer Interface and Future Directions of Technology Adoption

    OpenAIRE

    Saha, Amal K

    2017-01-01

    Banking is one of the most significant adopters of cutting-edge information technologies. Since its modern era beginning in the form of paper based accounting maintained in the branch, adoption of computerized system made it possible to centralize the processing in data centre and improve customer experience by making a more available and efficient system. The latest twist in this evolution is adoption of natural language processing and speech recognition in the user interface between the hum...

  6. Current and future possibilities of V2V and I2V technologies: an analysis directed toward Augmented Reality systems

    Science.gov (United States)

    Betancur, J. A.; Osorio-Gómez, Gilberto; Arnedo, Aida; Yarce Botero, Andrés.

    2014-06-01

    Nowadays, it is very important to explore the qualitative characteristics of autonomous mobility systems in automobiles, especially disruptive technology like Vehicle to Vehicle (V2V) and Infrastructure to Vehicle (I2V), in order to comprehend how the next generation of automobiles will be developed. In this sense, this research covers a general review about active safety in automobiles where V2V and I2V systems have been implemented; identifying the more realistic possibilities related to V2V and I2V technology and analyzing the current applications, some systems in development process and some future conceptual proposals. Mainly, it is notorious the potential development of mixing V2V and I2V systems pointing to increase the driver's attention; therefore, a configuration between these two technologies and some augmented reality system for automobiles (Head-Up Display and Head-Down Display) is proposed. There is a huge potential of implementation for this kind of configuration once the normative and the roadmap for its development can be widely established.

  7. N2Vision technology application for direct identification of commercial hydrocarbons in Trenton-Black River Formations of Ontario

    Energy Technology Data Exchange (ETDEWEB)

    Agou, S. [Productive Geoscience Exploration Inc., Whitby, ON (Canada)

    2006-07-01

    N2Vision seismic signal interpretation technology has been used to evaluate the petroleum and natural gas potential in the Trenton-Black River (TBR) formations of Ontario. The technology was developed in Russia in the 1980s to solve complex problems in frontier exploration. The N2Vision neural networks algorithm is a multilayer feed-forward neural network (MFFN) for pattern recognition and is based on data from existing wells collected over 20 years of method application. The algorithm recognizes hydrocarbons by establishing relationships between all attributes of the seismic field and data from existing wells. In Ontario, the algorithm was trained on data from many productive and non-productive wells from the researched and adjacent fields, as well as on seismic patterns of geological features obtained from the Yurubchen-Tokhom oil field in easter Siberia. The 2D seismic data was collected by different companies. It targeted shallower horizons and had non-consistent quality. The results of N2Vision were shown to be well correlated with the objective data. The common geological features of southern Ontario, Yurubchen field and the Baltic Syneclise were presented in this paper. All 3 regions are found in specific geodynamically prestressed and heated up zones that are represented primarily by shallow carbonates, leaching dolomites and highly permeable reservoirs with vertical fracturing. This paper demonstrated that the technology can greatly reduce the risk of selecting drilling locations, while significantly decreasing the cost of hydrocarbon exploration. tabs., figs.

  8. A Study on the Relationship between Self Directed Learning and Achievement in Information Technology of Students at Secondary Level

    Science.gov (United States)

    Jaleel, Sajna; O. M., Anuroofa

    2017-01-01

    Education at any level has normally been based on some image of the future; that was not impossible in a world that was changing slowly. Today, educators are preparing learners for a world we cannot even predict, and self-directed learning has become an essential foundation for 21st century learners. In recent years teachers are giving importance…

  9. Foreign direct investment and technology spillovers in low and middle-income countries : a comparative cross-sectoral analysis

    NARCIS (Netherlands)

    Jacob, J.; Sasso, S.

    2015-01-01

    In this paper we analyse the trends in Foreign Direct Investment (FDI) flows worldwide across sectors and across value-chain activities, with a particular focus on low- and middle-income countries in comparison with advanced countries. We begin by discussing the growing fragmentation of global

  10. Marginalization of end-use technologies in energy innovation for climate protection

    Science.gov (United States)

    Wilson, Charlie; Grubler, Arnulf; Gallagher, Kelly S.; Nemet, Gregory F.

    2012-11-01

    Mitigating climate change requires directed innovation efforts to develop and deploy energy technologies. Innovation activities are directed towards the outcome of climate protection by public institutions, policies and resources that in turn shape market behaviour. We analyse diverse indicators of activity throughout the innovation system to assess these efforts. We find efficient end-use technologies contribute large potential emission reductions and provide higher social returns on investment than energy-supply technologies. Yet public institutions, policies and financial resources pervasively privilege energy-supply technologies. Directed innovation efforts are strikingly misaligned with the needs of an emissions-constrained world. Significantly greater effort is needed to develop the full potential of efficient end-use technologies.

  11. Superconducting cavities developments efforts at RRCAT

    International Nuclear Information System (INIS)

    Puntambekar, A.; Bagre, M.; Dwivedi, J.; Shrivastava, P.; Mundra, G.; Joshi, S.C.; Potukuchi, P.N.

    2011-01-01

    Superconducting RE cavities are the work-horse for many existing and proposed linear accelerators. Raja Ramanna Centre for Advanced Technology (RRCAT) has initiated a comprehensive R and D program for development of Superconducting RF cavities suitable for high energy accelerator application like SNS and ADS. For the initial phase of technology demonstration several prototype 1.3 GHz single cell-cavities have been developed. The work began with development of prototype single cell cavities in aluminum and copper. This helped in development of cavity manufacturing process, proving various tooling and learning on various mechanical and RF qualification processes. The parts manufacturing was done at RRCAT and Electron beam welding was carried out at Indian industry. These cavities further served during commissioning trials for various cavity processing infrastructure being developed at RRCAT and are also a potential candidate for Niobium thin film deposition R and D. Based on the above experience, few single cell cavities were developed in fine grain niobium. The critical technology of forming and machining of niobium and the intermediate RF qualification were developed at RRCAT. The EB welding of bulk niobium cavities was carried out in collaboration with IUAC, New Delhi at their facility. As a next logical step efforts are now on for development of multicell cavities. The prototype dumbbells and end group made of aluminium, comprising of RF and HOM couplers ports have also been developed, with their LB welding done at Indian industry. In this paper we shall present the development efforts towards manufacturing of 1.3 GHz single cell cavities and their initial processing and qualification. (author)

  12. Demonstration of Air-Power-Assist Engine Technology for Clean Combustion and Direct Energy Recovery in Heavy Duty Application

    Energy Technology Data Exchange (ETDEWEB)

    Hyungsuk Kang; Chun Tai

    2010-05-01

    The first phase of the project consists of four months of applied research, starting from September 1, 2005 and was completed by December 31, 2005. During this time, the project team heavily relied on highly detailed numerical modeling techniques to evaluate the feasibility of the APA technology. Specifically, (i) A GT-Power{sup TM}engine simulation model was constructed to predict engine efficiency at various operating conditions. Efficiency was defined based on the second-law thermodynamic availability. (ii) The engine efficiency map generated by the engine simulation was then fed into a simplified vehicle model, which was constructed in the Matlab/Simulink environment, to predict fuel consumption of a refuse truck on a simple collection cycle. (iii) Design and analysis work supporting the concept of retrofitting an existing Sturman Industries Hydraulic Valve Actuation (HVA) system with the modifications that are required to run the HVA system with Air Power Assist functionality. A Matlab/Simulink model was used to calculate the dynamic response of the HVA system. Computer aided design (CAD) was done in Solidworks for mechanical design and hydraulic layout. At the end of Phase I, 11% fuel economy improvement was predicted. During Phase II, the engine simulation group completed the engine mapping work. The air handling group made substantial progress in identifying suppliers and conducting 3D modelling design. Sturman Industries completed design modification of the HVA system, which was reviewed and accepted by Volvo Powertrain. In Phase II, the possibility of 15% fuel economy improvement was shown with new EGR cooler design by reducing EGR cooler outlet temperature with APA engine technology from Air Handling Group. In addition, Vehicle Simulation with APA technology estimated 4 -21% fuel economy improvement over a wide range of driving cycles. During Phase III, the engine experimental setup was initiated at VPTNA, Hagerstown, MD. Air Handling system and HVA

  13. A direct comparison amongst different technologies (aerobic granular sludge, SBR and MBR) for the treatment of wastewater contaminated by 4-chlorophenol

    International Nuclear Information System (INIS)

    Carucci, Alessandra; Milia, Stefano; Cappai, Giovanna; Muntoni, Aldo

    2010-01-01

    Environmental concern on chlorinated phenols is rising due to their extreme toxicity even at low concentrations and their persistency in water and soils. Since the high amount of published data often lacks in terms of uniformity, direct comparisons amongst different treatment technologies are very difficult, or even impossible. In this study, granular sludge developed in an acetate-fed Granular sludge Sequencing Batch Reactor (GSBR) was used for the aerobic degradation of low chlorinated 4-chlorophenol (4CP), with readily biodegradable sodium acetate (NaAc) as growth substrate. A conventional Sequencing Batch Reactor (SBR) and a Membrane BioReactor (MBR) were operated in parallel under the same 4CP influent concentrations and/or 4CP volumetric organic loading rates as the GSBR, in order to carry out a direct comparison in terms of 4CP removal efficiencies and specific removal rates, effluent quality, waste sludge production, system simplicity, land area requirement, start-up times, NaAc dosage as growth substrate and maximum applied 4CP volumetric organic loading rate. A decision matrix was built to define the best technology to suit different scenarios: the GSBR was proved to be the most suitable technology when system simplicity, low land area requirement and short start-up times were considered as critical parameters for decision making.

  14. Investigation of isotopic signals in the unsaturated zone with the use of direct push technology and azaeotropic distillation

    Directory of Open Access Journals (Sweden)

    Andreas Kallioras

    2012-09-01

    Full Text Available This paper contributes to the investigation of the unsaturated zone, through the application of combined field and lab techniques. The results show that direct push methods, which are considered ideal for multilevel sampling of undisturbed soil in the unsaturated zone, proved to be effective also for the consequent extraction of the pore water for further isotopic determination. This ultimate goal can be achieved thank to the application of azaetropic distillation, which has the least isotopic fractionation effects on groundwater samples.

  15. Voluntary versus Enforced Team Effort

    Directory of Open Access Journals (Sweden)

    Claudia Keser

    2011-08-01

    Full Text Available We present a model where each of two players chooses between remuneration based on either private or team effort. Although at least one of the players has the equilibrium strategy to choose private remuneration, we frequently observe both players to choose team remuneration in a series of laboratory experiments. This allows for high cooperation payoffs but also provides individual free-riding incentives. Due to significant cooperation, we observe that, in team remuneration, participants make higher profits than in private remuneration. We also observe that, when participants are not given the option of private remuneration, they cooperate significantly less.

  16. Development of advanced pump impeller fabrication technology using direct nano- ceramic dispersion casting for long time erosion durability

    International Nuclear Information System (INIS)

    Rhee, Chang Kyu; Lee, Min Ku; Park, Jin Ju

    2008-09-01

    Many components of pump impeller of nuclear power plants is generally made of stainless steel and Al-bronze with superior corrosion resistance to sea water. However, they should be replaced by one- to five-year period because of material damage by a very big cavitation impact load, even though their designed durability is twenty years. Especially, in case of Young-Gwang nuclear power plant located at the west sea, damage of components of pump impeller is so critical due to the additional damage by solid particle erosion and hence their replacement period is very short as several months compared to other nuclear power plants. In addition, it is very difficult to maintain and repair the components of pump impeller since there is no database on the exact durability and damage mechanism. Therefore, in this study, fabrication technology of new advanced materials modified by dispersion of nano-carbide and -oxide ceramics into the matrix is developed first. Secondly, technology to estimate the dynamic damage by solid particle erosion is established and hence applied to the prediction of the service life of the components of pump impeller

  17. Social Media Technology and Public Health in Ontario: Findings from a Planning Meeting Exploring Current Practices and Future Research Directions.

    Science.gov (United States)

    Booth, Richard; McMurray, Josephine; Regan, Sandra; Kothari, Anita; Donelle, Lorie; McBride, Susan; Sobel, Annette; Hall, Jodi; Fraser, Robert; Foisey, Lyndsay

    2017-01-01

    In the province of Ontario, many of the public health units (PHUs) now possess and use social media as part of their daily health promotion and communication operations. To explore this topic, a planning meeting was held to generate deeper insights toward the use of these forms of technology for preventative services delivery. The planning meeting was held with 50 participants, comprising representatives from 20 of the 36 PHUs in Ontario, interested academics, students and government representatives. A nominal group technique (NGT) was used to build consensus related to future research needs, as related to public health and social media. Participants generated a range of insights around the use of social media, including the need for: leadership buy-in and resource allocation; social media policy and governance structure; performance measurement and evaluation; practices related to engagement with program recipients and addressing the lack of resources faced by many health units. Future research priorities were also generated, related to evaluating the cost-benefit of social media activities and understanding behaviour change implications. Further research is needed to evaluate the functionality, leadership and competency requirements and impact(s) of these new forms of health communication technology within public health service delivery. Copyright © 2017 Longwoods Publishing.

  18. Power plant ash and slag waste management technological direction when Kansk-Achinsk brown coal is burned

    Directory of Open Access Journals (Sweden)

    Lihach Snejana A.

    2017-01-01

    Full Text Available Today resource efficiency technology development in all industries where conventional raw material is being replaced by local natural resources and industrial waste is an essential matter. Along with that most producing operations are overload with wide range of waste produced during technological process. Thermal power stations are real world evidence. Their main waste is ash and slag which accumulated in great amounts in often overfull ash dumps. The goal of present work is to find perspective ash dump waste utilization methods. The study will be based on experimentally obtained data: elementary compound and properties of Kansk-Achinsk brown coal. Research methods: experimental, chemical silicate analysis, mineralogical forms identification within samples by using ASM X-ray diffraction analysis. Experiments resulted with the following conclusions: silica is ash main component, and ash has the form of ore concentrate analogy in a number of elements. We think that ASM main properties which make it useful for utilization are: high content of calcium oxide; high ash sorption properties; ASM radiation safety class which makes them safe to be used in materials, goods, and structures production for residence and public buildings construction and reconstruction; sufficiently high content of individual elements.

  19. Buried waste integrated demonstration technology integration process

    International Nuclear Information System (INIS)

    Ferguson, J.S.; Ferguson, J.E.

    1992-04-01

    A Technology integration Process was developed for the Idaho National Energy Laboratories (INEL) Buried Waste Integrated Demonstration (BWID) Program to facilitate the transfer of technology and knowledge from industry, universities, and other Federal agencies into the BWID; to successfully transfer demonstrated technology and knowledge from the BWID to industry, universities, and other Federal agencies; and to share demonstrated technologies and knowledge between Integrated Demonstrations and other Department of Energy (DOE) spread throughout the DOE Complex. This document also details specific methods and tools for integrating and transferring technologies into or out of the BWID program. The document provides background on the BWID program and technology development needs, demonstrates the direction of technology transfer, illustrates current processes for this transfer, and lists points of contact for prospective participants in the BWID technology transfer efforts. The Technology Integration Process was prepared to ensure compliance with the requirements of DOE's Office of Technology Development (OTD)

  20. 两层供应链系统最优广告努力水平与直接价格折扣的博弈分析%A Game Analysis of Optimal Advertising Efforts and Direct Price Discount Strategy for the Two-level Supply Chain

    Institute of Scientific and Technical Information of China (English)

    何丽红; 廖茜; 刘蒙蒙; 苑春

    2017-01-01

    在两层供应链中,考虑需求受广告努力水平和制造商提供的直接价格折扣的联合影响,建立供应链成员的合作广告努力水平与价格折扣策略模型,通过比较Nash均衡模型、制造商主导的Stackelberg博弈模型、零售商主导的Stackelberg博弈模型和合作博弈模型,得到不同情形下制造商与零售商的最优广告努力水平与制造商提供给消费者的最优价格折扣策略.结果表明,仅当商品价格弹性满足一定水平时,制造商才可能给予消费者一定的价格折扣;价格弹性越大,制造商可给与的直接价格折扣就越大,且消费者在合作博弈下可以得到更实惠的价格.当制造商给予消费者最优直接价格折扣时,制造商和零售商的广告努力积极性与价格弹性正相关.此外,制造商和零售商的广告成本存在比例关系,一方可以通过自身广告成本投入来估算另一方的广告成本.最后,运用帕累托改进对合作博弈下供应链系统的最大利润进行充分协调,以实现供应链参与双方和消费者的“三赢”局面.上述结论对供应链参与方合作模式的选择、最优广告努力水平与直接价格折扣策略的制定具有指导意义.%When the market demand is sensitive to sales price and the advertising efforts,both manufacturer and retailer in a supply chain must make decisions on their advertising effort levels and price discount.Based on the new demand function which is simultaneously affected by advertising efforts and direct price discount offered by the manufacturer to consumers,the optimal advertising efforts strategy of the supply chain and direct price discount of the manufacturer are mainly discussed by comparing four game models,which are Nash Equilibrium,Stackelberg game model in which the manufacturer is leader,Stackelberg game model in which the retailer is leader and cooperative game.The study finds that only when price elasticity meets a certain

  1. Analysis Efforts Supporting NSTX Upgrades

    International Nuclear Information System (INIS)

    Zhang, H.; Titus, P.; Rogoff, P.; Zolfaghari, A.; Mangra, D.; Smith, M.

    2010-01-01

    The National Spherical Torus Experiment (NSTX) is a low aspect ratio, spherical torus (ST) configuration device which is located at Princeton Plasma Physics Laboratory (PPPL) This device is presently being updated to enhance its physics by doubling the TF field to 1 Tesla and increasing the plasma current to 2 Mega-amperes. The upgrades include a replacement of the centerstack and addition of a second neutral beam. The upgrade analyses have two missions. The first is to support design of new components, principally the centerstack, the second is to qualify existing NSTX components for higher loads, which will increase by a factor of four. Cost efficiency was a design goal for new equipment qualification, and reanalysis of the existing components. Showing that older components can sustain the increased loads has been a challenging effort in which designs had to be developed that would limit loading on weaker components, and would minimize the extent of modifications needed. Two areas representing this effort have been chosen to describe in more details: analysis of the current distribution in the new TF inner legs, and, second, analysis of the out-of-plane support of the existing TF outer legs.

  2. APS Education and Diversity Efforts

    Science.gov (United States)

    Prestridge, Katherine; Hodapp, Theodore

    2015-11-01

    American Physical Society (APS) has a wide range of education and diversity programs and activities, including programs that improve physics education, increase diversity, provide outreach to the public, and impact public policy. We present the latest programs spearheaded by the Committee on the Status of Women in Physics (CSWP), with highlights from other diversity and education efforts. The CSWP is working to increase the fraction of women in physics, understand and implement solutions for gender-specific issues, enhance professional development opportunities for women in physics, and remedy issues that impact gender inequality in physics. The Conferences for Undergraduate Women in Physics, Professional Skills Development Workshops, and our new Professional Skills program for students and postdocs are all working towards meeting these goals. The CSWP also has site visit and conversation visit programs, where department chairs request that the APS assess the climate for women in their departments or facilitate climate discussions. APS also has two significant programs to increase participation by underrepresented minorities (URM). The newest program, the APS National Mentoring Community, is working to provide mentoring to URM undergraduates, and the APS Bridge Program is an established effort that is dramatically increasing the number of URM PhDs in physics.

  3. 多向可调节柔性连接式石材幕墙施工技术%Multi Direction Adjustable Connection Stone Curtain Wall Construction Technology

    Institute of Scientific and Technical Information of China (English)

    杨军

    2016-01-01

    This paper introduces a new type of surface stone curtain wall construction technology, the technology used to adjust the flexible back bolt of the multi direction can be adjusted, improved the construction efficiency of special⁃shaped curved surface stone, irregular curved surface stone curtain wall facade effect can be better.%介绍了一种新的异形曲面石材幕墙施工技术,该技术运用多向可调节柔性背栓的多向可调节性,提高了异形曲面石材的施工效率,异形曲面石材幕墙的外立面效果得以更好呈现。

  4. Technology Transfer

    Science.gov (United States)

    Smith, Nanette R.

    1995-01-01

    The objective of this summer's work was to attempt to enhance Technology Application Group (TAG) ability to measure the outcomes of its efforts to transfer NASA technology. By reviewing existing literature, by explaining the economic principles involved in evaluating the economic impact of technology transfer, and by investigating the LaRC processes our William & Mary team has been able to lead this important discussion. In reviewing the existing literature, we identified many of the metrics that are currently being used in the area of technology transfer. Learning about the LaRC technology transfer processes and the metrics currently used to track the transfer process enabled us to compare other R&D facilities to LaRC. We discuss and diagram impacts of technology transfer in the short run and the long run. Significantly, it serves as the basis for analysis and provides guidance in thinking about what the measurement objectives ought to be. By focusing on the SBIR Program, valuable information regarding the strengths and weaknesses of this LaRC program are to be gained. A survey was developed to ask probing questions regarding SBIR contractors' experience with the program. Specifically we are interested in finding out whether the SBIR Program is accomplishing its mission, if the SBIR companies are providing the needed innovations specified by NASA and to what extent those innovations have led to commercial success. We also developed a survey to ask COTR's, who are NASA employees acting as technical advisors to the SBIR contractors, the same type of questions, evaluating the successes and problems with the SBIR Program as they see it. This survey was developed to be implemented interactively on computer. It is our hope that the statistical and econometric studies that can be done on the data collected from all of these sources will provide insight regarding the direction to take in developing systematic evaluations of programs like the SBIR Program so that they can

  5. Justification of directions of technological and price audit systems changes for the purpose of high-rise construction innovating

    Science.gov (United States)

    Rogacheva, Yana; Panenkov, Andrey; Petrikova, Zinaida; Nezhnikova, Ekaterina

    2018-03-01

    Improving the quality of high-rise buildings under modern conditions should be based not only on compliance with the norms of technical regulations, but also on ensuring energy efficiency, environmental friendliness, and intellectuality, which can be achieved only through the introduction of innovations at all stages of the life cycle of the investment project. Authors of this article justified the need for a mechanism of technological and price audit of projects. They also suggested the model of life cycle of organizational and economic changes, connected with implantation of the mechanism of projects audit. They showed innovation character of ecological high-rise construction for the whole life cycle. Authors also made proposals to change the audit system for high-rise construction projects in the focus of its environmental friendliness.

  6. Justification of directions of technological and price audit systems changes for the purpose of high-rise construction innovating

    Directory of Open Access Journals (Sweden)

    Rogacheva Yana

    2018-01-01

    Full Text Available Improving the quality of high-rise buildings under modern conditions should be based not only on compliance with the norms of technical regulations, but also on ensuring energy efficiency, environmental friendliness, and intellectuality, which can be achieved only through the introduction of innovations at all stages of the life cycle of the investment project. Authors of this article justified the need for a mechanism of technological and price audit of projects. They also suggested the model of life cycle of organizational and economic changes, connected with implantation of the mechanism of projects audit. They showed innovation character of ecological high-rise construction for the whole life cycle. Authors also made proposals to change the audit system for high-rise construction projects in the focus of its environmental friendliness.

  7. A comparative efficacy study of photic driving brainwave entrainment technology with a novel form of more direct entrainment

    Science.gov (United States)

    Knowles, Richard Thomas

    This exploratory study compared the efficacy of a novel brainwave electromagnetic (EM) entrainment technology against a more conventional technology utilizing the photic-driving technique. Both experimental conditions were also compared with a 7-minute control session that took place immediately before each stimulation session. The Schumann Resonance (SR) frequency was selected as the delivery signal and was chosen because of previous findings suggesting that entrainment to this frequency can often produce transpersonal if not paranormal, experiences in the entrainee, which sometimes resemble remote viewing or out-of-body experiences. A pilot study determined which of two novel entrainment modalities (a copper coil or a 16-solenoid headset) worked most effectively for use with the rest of the study. In the main study, an artificial SR signal at 7.8Hz was delivered during the photic-driving sessions, but a recording of the real-time SR was used to deliver the entrainment signal during sessions devoted to the electromagnetic entrainment modality. Sixteen participants were recruited from the local area, and EEG recordings were acquired via a 32-channel Deymed electroencephalography system. Comparative analyses were performed between the control and experimental portions of each session to assess for efficacy of the novel entrainment modality used, and, in the main study, between the electromagnetic and photic-driving sessions, to assess for differential entrainment efficacy between these groups. A follow-up study was additionally performed primarily to determine whether responders could replicate their entrainment effect from the main study. Results showed that EM entrainment appeared to be possible but is not nearly as robust or reliable as photic driving. Additionally, no profound transpersonal or paranormal experiences were elicited during the course of the study, and, when asked, participants were not able to determine with any degree of success, when the

  8. STAR Infrastructure Database: An effort to know each other

    Energy Technology Data Exchange (ETDEWEB)

    Mora, J.C.; Real, Almudena [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas - CIEMAT (Spain); Vesterbacka, Pia; Outola, Iisa [STUK - Radiation and Nuclear Safety Authority (Finland); Barnett, Catherine; Beresford, Nick [Natural Environment Research Council - NERC-CEH (United Kingdom); Bradshaw, Clare [Stockholm University (Sweden); Skipperud, Lindis [Norwegian University of Life Sciences - UMB (Norway); Wilrodt, Christine; Steiner, Martin [Federal Office for Radiation Protection - BfS (Germany); Vanhoudt, Nathalie [Belgian Nuclear Research Centre SCK-CEN (Belgium); Komperoed, Mari [Norwegian Radiation Protection Authority - NRPA (Norway); Gurriaran, Rodolfo; Gilbin, Rodolphe; Hinton, Thomas [Institut de Radioprotection et de Surete Nucleaire - IRSN (France)

    2014-07-01

    Effort over the last decade to make radioecology stronger and sustainable within Europe crystallized in the creation of the European Radioecology Alliance. The first step for this integrative effort was the establishment of a network of excellence (NoE) under the EU FP7 Strategy for Allied Radioecology (STAR www.star-radioecology.org) project which commenced in 2011. One of the project objectives was to share knowledge of European radioecological capabilities. To help achieve this, a register of these capabilities at each of the STAR laboratories has been created. An Infrastructure Database was designed and programmed using web 2.0 technologies on a 'wiki' platform. Its intended use was to identify what assets were held and where improvements could be made. Information collated includes an inventory of the radioanalytical or conventional equipment and methods, bio-informatics equipment and methods, sample and data archives held, and models and codes used. It also provides a summary of the radioecological expertise of the 170 radio-ecologists at STAR institutes whose knowledge is wide-ranging and encompasses: atmospheric dispersion, dosimetry, ecology, ecotoxicology, environmental radiation protection, environmental surveillance, foodstuffs, terrestrial, freshwater and marine radioecology, modelling, radiobiology and radionuclide analyses, emergency preparedness, education and training, amongst others. In 2013, the EU FP7 Coordination and implementation of a pan-European instrument for radioecology (COMET, www.comet-radioecology.org) project, involving the STAR partners and additionally one Japanese and two Ukrainian research institutes, was initiated. The capabilities of these additional partners will be added to the database in 2014. The aim of the database was to gather information to: - avoid duplication of effort and thereby increase efficiency, - improve synergy and collaboration between the STAR project partners and others involved in

  9. A novel safety device with metal counter meshing gears discriminator directly driven by axial flux permanent magnet micromotors based on MEMS technology

    Science.gov (United States)

    Zhang, Weiping; Chen, Wenyuan; Zhao, Xiaolin; Li, Shengyong; Jiang, Yong

    2005-08-01

    In a novel safety device based on MEMS technology for high consequence systems, the discriminator consists of two groups of metal counter meshing gears and two pawl/ratchet wheel mechanisms. Each group of counter meshing gears is onepiece and driven directly by an axial flux permanent magnet micromotor respectively. The energy-coupling element is an optical shutter with two collimators and a coupler wheel. The safety device's probability is less than 1/106. It is fabricated by combination of an LiGA-like process and precision mechanical engineering. The device has simple structure, few dynamic problems, high strength and strong reliability.

  10. VIOLENCE IN MARKETING COMMUNICATION EFFORTS OF FASHION BRANDS: SHOCKVERTISING

    OpenAIRE

    BAYAZIT, Zeynep; PANAYIRCI, Uğur Cevdet

    2016-01-01

    Contemporary social and technological changes inevitably affect consumer behaviour. Today’s customer is savvy, have no time and hard to persuade. This new relationship between customers and brands has a deeper impact on competitive industries such as fashion. Fashion brands are eager to adopt shocking themes for their marketing communication efforts in order to emotionally affect and challenge consumers. Aim of this study is to study with a critical perspective the advertisement efforts of fa...

  11. Shell Inspection History and Current CMM Inspection Efforts

    Energy Technology Data Exchange (ETDEWEB)

    Montano, Joshua Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-01-26

    The following report provides a review of past and current CMM Shell Inspection efforts. Calibration of the Sheffield rotary contour gauge has expired and the primary inspector, Matthew Naranjo, has retired. Efforts within the Inspection team are transitioning from maintaining and training new inspectors on Sheffield to off-the-shelf CMM technology. Although inspection of a shell has many requirements, the scope of the data presented in this report focuses on the inner contour, outer contour, radial wall thickness and mass comparisons.

  12. Space station high gain antenna concept definition and technology development

    Science.gov (United States)

    Wade, W. D.

    1972-01-01

    The layout of a technology base is reported from which a mechanically gimballed, directional antenna can be developed to support a manned space station proposed for the late 1970's. The effort includes the concept definition for the antenna assembly, an evaluation of available technology, the design of critical subassemblies and the design of critical subassembly tests.

  13. Technology Assessment for Future MILSATCOM Systems; An Update of the EHF Bands

    Science.gov (United States)

    1980-10-01

    converging these efforts, the MSO has prepared a "Technology Development Program Plan" ( TDPP ). The TOPP defines a coordinated approach to the R&D...required to insure the availability of the technology necessary to support future systems. Some of the objectives of the TDPP are: to minimize...and TDPP have illuminated the need for technology development efforts directed toward minimizing the cost- risk and schedule-risk, and insuring the

  14. Termination of prehospital resuscitative efforts

    DEFF Research Database (Denmark)

    Mikkelsen, Søren; Schaffalitzky de Muckadell, Caroline; Binderup, Lars Grassmé

    2017-01-01

    -and-death decision-making in the patient's medical records is required. We suggest that a template be implemented in the prehospital medical records describing the basis for any ethical decisions. This template should contain information regarding the persons involved in the deliberations and notes on ethical......BACKGROUND: Discussions on ethical aspects of life-and-death decisions within the hospital are often made in plenary. The prehospital physician, however, may be faced with ethical dilemmas in life-and-death decisions when time-critical decisions to initiate or refrain from resuscitative efforts...... need to be taken without the possibility to discuss matters with colleagues. Little is known whether these considerations regarding ethical issues in crucial life-and-death decisions are documented prehospitally. This is a review of the ethical considerations documented in the prehospital medical...

  15. UNIVERSITY RESEARCH PROGRAMS IN ROBOTICS, TECHNOLOGIES FOR MICROELECTROMECHANICAL SYSTEMS IN DIRECTED STOCKPILE WORK RADIATION AND ENGINEERING CAMPAIGNS - 2005-06 FINAL ANNUAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    James S. Tulenko; Dean Schoenfeld; David Hintenlang; Carl Crane; Shannon Ridgeway; Jose Santiago; Charles Scheer

    2006-11-30

    The research performed by the University of Florida (UF) is directed to the development of technologies that can be utilized at a micro-scale in varied environments. Work is focused on micro-scale energy systems, visualization, and mechanical devices. This work will impact the NNSA need related to micro-assembly operations. The URPR activities are executed in a University environment, yet many applications of the resulting technologies may be classified or highly restrictive in nature. The NNSA robotics technologists apply an NNSA needs focus to the URPR research, and actively work to transition relevant research into the deployment projects in which they are involved. This provides a “Research to Development to Application” structure within which innovative research has maximum opportunity for impact without requiring URPR researchers to be involved in specific NNSA projects. URPR researchers need to be aware of the NNSA applications in order to ensure the research being conducted has relevance, the URPR shall rely upon the NNSA sites for direction.

  16. Future technology of the spark-ignition engine: spray-guided direct injection with piezo injector; Die Zukunftstechnologie des Ottomotors: Strahlgefuehrte Direkteinspritzung mit Piezo-Injektor

    Energy Technology Data Exchange (ETDEWEB)

    Waltner, A.; Lueckert, P.; Schaupp, U.; Rau, E.; Kemmler, R.; Weller, R. [DaimlerChrysler AG, Stuttgart (Germany)

    2006-07-01

    The completely new-style second-generation direct-injection for spark-ignition engines from Mercedes-Benz offers clear improvements in fuel consumption, power and emission levels. Faced with the necessity of further reducing fuel consumption, primarily in spark-ignition engines, the Mercedes-Benz combustion system represents a significant leap in technology. It was possible to noticeably expand the mapping range in which stratified operation can be used compared with the first generation. This significant improvement in efficiency results in more useable energy and a substantial reduction in consumption in city traffic, and also on cross-country and highway trips at roughly constant speeds. These benefits make themselves felt not only in the test cycle, but also in the real-world consumption achieved by the customer. Development proceeded from the base aspirated engine on the principle of the modular expansion of technology. Since production development of this combustion system was not possible using the hydraulic and ignition components available on the market, a new outward-opening piezo fuel injector had to be developed for production readiness, along with a 200-bar high-pressure fuel system, which is being introduced here for the first time world-wide. The injection spray stability and excellent mixture preparation that it achieves produce an optimally combustible mixture at the spark plug. The potential of multiple injection, along with stability in stratified operation, brings further benefits and possibilities for direct injection in fuel consumption and emissions. (orig.)

  17. UNIVERSITY RESEARCH PROGRAMS IN ROBOTICS, TECHNOLOGIES FOR MICROELECTROMECHANICAL SYSTEMS IN DIRECTED STOCKPILE WORK RADIATION AND ENGINEERING CAMPAIGNS - 2005-2006 FINAL ANNUAL REPORT

    International Nuclear Information System (INIS)

    James S. Tulenko; Dean Schoenfeld; David Hintenlang; Carl Crane; Shannon Ridgeway; Jose Santiago; Charles Scheer

    2006-01-01

    The research performed by the University of Florida (UF) is directed to the development of technologies that can be utilized at a micro-scale in varied environments. Work is focused on micro-scale energy systems, visualization, and mechanical devices. This work will impact the NNSA need related to micro-assembly operations. The URPR activities are executed in a University environment, yet many applications of the resulting technologies may be classified or highly restrictive in nature. The NNSA robotics technologists apply an NNSA needs focus to the URPR research, and actively work to transition relevant research into the deployment projects in which they are involved. This provides a ''Research to Development to Application'' structure within which innovative research has maximum opportunity for impact without requiring URPR researchers to be involved in specific NNSA projects. URPR researchers need to be aware of the NNSA applications in order to ensure the research being conducted has relevance, the URPR shall rely upon the NNSA sites for direction

  18. A State-of-the-Art Review on Soil Reinforcement Technology Using Natural Plant Fiber Materials: Past Findings, Present Trends and Future Directions

    Directory of Open Access Journals (Sweden)

    Sivakumar Gowthaman

    2018-04-01

    Full Text Available Incorporating sustainable materials into geotechnical applications increases day by day due to the consideration of impacts on healthy geo-environment and future generations. The environmental issues associated with conventional synthetic materials such as cement, plastic-composites, steel and ashes necessitate alternative approaches in geotechnical engineering. Recently, natural fiber materials in place of synthetic material have gained momentum as an emulating soil-reinforcement technique in sustainable geotechnics. However, the natural fibers are innately different from such synthetic material whereas behavior of fiber-reinforced soil is influenced not only by physical-mechanical properties but also by biochemical properties. In the present review, the applicability of natural plant fibers as oriented distributed fiber-reinforced soil (ODFS and randomly distributed fiber-reinforced soil (RDFS are extensively discussed and emphasized the inspiration of RDFS based on the emerging trend. Review also attempts to explore the importance of biochemical composition of natural-fibers on the performance in subsoil reinforced conditions. The treatment methods which enhances the behavior and lifetime of fibers, are also presented. While outlining the current potential of fiber reinforcement technology, some key research gaps have been highlighted at their importance. Finally, the review briefly documents the future direction of the fiber reinforcement technology by associating bio-mediated technological line.

  19. A State-of-the-Art Review on Soil Reinforcement Technology Using Natural Plant Fiber Materials: Past Findings, Present Trends and Future Directions.

    Science.gov (United States)

    Gowthaman, Sivakumar; Nakashima, Kazunori; Kawasaki, Satoru

    2018-04-04

    Incorporating sustainable materials into geotechnical applications increases day by day due to the consideration of impacts on healthy geo-environment and future generations. The environmental issues associated with conventional synthetic materials such as cement, plastic-composites, steel and ashes necessitate alternative approaches in geotechnical engineering. Recently, natural fiber materials in place of synthetic material have gained momentum as an emulating soil-reinforcement technique in sustainable geotechnics. However, the natural fibers are innately different from such synthetic material whereas behavior of fiber-reinforced soil is influenced not only by physical-mechanical properties but also by biochemical properties. In the present review, the applicability of natural plant fibers as oriented distributed fiber-reinforced soil (ODFS) and randomly distributed fiber-reinforced soil (RDFS) are extensively discussed and emphasized the inspiration of RDFS based on the emerging trend. Review also attempts to explore the importance of biochemical composition of natural-fibers on the performance in subsoil reinforced conditions. The treatment methods which enhances the behavior and lifetime of fibers, are also presented. While outlining the current potential of fiber reinforcement technology, some key research gaps have been highlighted at their importance. Finally, the review briefly documents the future direction of the fiber reinforcement technology by associating bio-mediated technological line.

  20. Pioneering efforts to control AIDS. Review: IHO.

    Science.gov (United States)

    Chatterji, A; Sehgal, K

    1995-01-01

    The Indian Health Organisation (IHO) is a nongovernmental organization based in Bombay with more than 12 years experience in HIV/AIDS prevention and control efforts. It has attacked ignorance and prejudice via communication efforts. IHO has created a bond with some hospital systems of Bombay. IHO disseminated information about HIV/AIDS in Bombay's red light districts and has bridged the gap between the city's medical establishment and the community most in need. IHO's aggressive street-level fighting in a sector replete with sensitive issues has somewhat isolated it from mainstream national NGOs involved in HIV/AIDS education and control as well as from the medical establishment and potential partners. IHO funds have been reduced, forcing IHO to reduce intervention programs and responses to field demands. It suffers from a high rate of turnover among middle management staff. IHO's chief advantage is its confidence gained over the past 12 years. IHO has clearly delineated the direction it wants to go: care and support programs for persons affected by HIV/AIDS and for commercial sex workers to allow them to quit prostitution, orphan care, and development of training institutions for the education and motivation of medical personnel on HIV/AIDS care and prevention. It plans to build a hospice for AIDS patients and orphans and a training center. Training activities will vary from one-week orientation programs to three-month certificate courses for medical workers, NGOs, and managers from the commercial sector. IHO is prepared to share its experiences in combating HIV/AIDS in Bombay in a team effort. As official and bilateral funding has been decreasing, IHO has targeted industry for funding. Industry has responded, which enables IHO to sustain its core programs and approaches. IHO observations show a decrease in the number of men visiting red-light districts. IHO enjoys a positive relationship with Bombay's media reporting on AIDS.

  1. Remotely-Supervised Transcranial Direct Current Stimulation (tDCS for Clinical Trials: Guidelines for Technology and Protocols

    Directory of Open Access Journals (Sweden)

    Leigh E Charvet

    2015-03-01

    Full Text Available The effect of transcranial direct current stimulation (tDCS is cumulative. Treatment protocols typically require multiple consecutive sessions spanning weeks or months. However, traveling to clinic for a tDCS session can present an obstacle to subjects and their caregivers. With modified devices and headgear, tDCS treatment can be administered remotely under clinical supervision, potentially enhancing recruitment, throughput, and convenience. Here we propose standards and protocols for clinical trials utilizing remotely-supervised tDCS with the goal of providing safe, reproducible and well-tolerated stimulation therapy outside of the clinic. The recommendations include: 1 training of staff in tDCS treatment and supervision, 2 assessment of the user’s capability to participate in tDCS remotely, 3 ongoing training procedures and materials including assessments of the user and/or caregiver, 4 simple and fail-safe electrode preparation techniques and tDCS headgear, 5 strict dose control for each session, 6 ongoing monitoring to quantify compliance (device preparation, electrode saturation/placement, stimulation protocol, with corresponding corrective steps as required, 7 monitoring for treatment-emergent adverse effects, 8 guidelines for discontinuation of a session and/or study participation including emergency failsafe procedures tailored to the treatment population’s level of need. These guidelines are intended to provide a minimal level of methodological rigor for clinical trials seeking to apply tDCS outside a specialized treatment center. We outline indication-specific applications (Attention Deficit Hyperactivity Disorder, Depression, Multiple Sclerosis, Palliative Care following these recommendations that support a standardized framework for evaluating the tolerability and reproducibility of remote-supervised tDCS that, once established, will allow for translation of tDCS clinical trials to a greater size and range of patient populations.

  2. [Limitation of the therapeutic effort].

    Science.gov (United States)

    Herreros, B; Palacios, G; Pacho, E

    2012-03-01

    The limitation of the therapeutic effort (LTE) consists in not applying extraordinary or disproportionate measures for therapeutic purposes that are proposed for a patient with poor life prognosis and/or poor quality of life. There are two types. The first is to not initiate certain measures or to withdraw them when they are established. A decision of the LTE should be based on some rigorous criteria, so that we make the following proposal. First, it is necessary to know the most relevant details of the case to make a decision: the preferences of the patient, the preferences of the family when pertinent, the prognosis (severity), the quality of life and distribution of the limited resources. After, the decision should be made. In this phase, participatory deliberation should be established to clarify the end of the intervention. Finally, if it is decided to perform an LTE, it should be decided how to do it. Special procedures, disproportionate measures, that are useless and vain should not be initiated for the therapeutic objective designed (withdraw them if they have been established). When it has been decided to treat a condition (interim measures), the treatment should be maintained. This complex phase may need stratification of he measures. Finally, the necessary palliative measures should be established. Copyright © 2011 Elsevier España, S.L. All rights reserved.

  3. Geysers advanced direct contact condenser research

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, J.; Bahning, T.; Bharathan, D.

    1997-12-31

    The first geothermal application of the Advanced Direct Contact Condenser (ADCC) technology developed by the National Renewable Energy Laboratory (NREL) is now operational and is being tested at The Geysers Power Plant Unit 11. This major research effort is being supported through the combined efforts of NREL, The Department of Energy (DOE), and Pacific Gas and Electric (PG&E). NREL and PG&E have entered into a Cooperative Research And Development Agreement (CRADA) for a project to improve the direct-contact condenser performance at The Geysers Power Plant. This project is the first geothermal adaptation of an advanced condenser design developed for the Ocean Thermal Energy Conversion (OTEC) systems. PG&E expects this technology to improve power plant performance and to help extend the life of the steam field by using steam more efficiently. In accordance with the CRADA, no money is transferred between the contracting parties. In this case the Department of Energy is funding NREL for their efforts in this project and PG&E is contributing funds in kind. Successful application of this technology at The Geysers will provide a basis for NREL to continue to develop this technology for other geothermal and fossil power plant systems.

  4. Mental and physical effort affect vigilance differently

    NARCIS (Netherlands)

    Smit, A.S.; Eling, P.A.T.M.; Hopman, M.T.E.; Coenen, A.M.L.

    2005-01-01

    Both physical and mental effort are thought to affect vigilance. Mental effort is known for its vigilance declining effects, but the effects of physical effort are less clear. This study investigated whether these two forms of effort affect the EEG and subjective alertness differently. Participants

  5. Mental and physical effort affect vigilance differently.

    NARCIS (Netherlands)

    Smit, A.S.; Eling, P.A.T.M.; Hopman, M.T.E.; Coenen, A.M.L.

    2005-01-01

    Both physical and mental effort are thought to affect vigilance. Mental effort is known for its vigilance declining effects, but the effects of physical effort are less clear. This study investigated whether these two forms of effort affect the EEG and subjective alertness differently. Participants

  6. Easier Said than Done: Leading Technology Integration

    Science.gov (United States)

    Bleakley, David A.; Mangin, Melinda M.

    2013-01-01

    In this case, Mr. Phuture, a district administrator, attempts to lead a diverse team of educators and community members in an effort to develop a district-wide action plan for the integration of instructional technology in K-12 classrooms. Along the way, Mr. Phuture confronts ambiguities in the superintendent's directives, passionate contradicting…

  7. Standardization efforts in IP telephony

    Science.gov (United States)

    Sengodan, Senthil; Bansal, Raj

    1999-11-01

    The recent interest in IP telephony has led to a tremendous increase of standardization activities in the area. The three main standards bodies in the area of IP telephony are the International Telecommunication Union's (ITU-T) Study Group (SG) 16, the Internet Engineering Task Force (IETF) and the European Telecommunication Standards Institute's (ETSI) TIPHON project. In addition, forums such as the International Multimedia Teleconferencing Consortium (IMTC), the Intelligent Network Forum (INF), the International Softswitch Consortium (ISC), the Electronic Computer Telephony Forum (ECTF), and the MIT's Internet Telephony Consortium (ITC) are looking into various other aspects that aim at the growth of this industry. This paper describes the main tasks (completed and in progress) undertaken by these organizations. In describing such work, an overview of the underlying technology is also provided.

  8. Beyond Effort and Cleverness: Technology, Language, and Community in Education

    Science.gov (United States)

    Hawk, Benson S.

    2017-01-01

    This paper examines the strengths and weaknesses of different models of education. The author, a teacher of humanities at Newark Academy in New Jersey, aims to move beyond some of the rhetoric about "progress" or rhetoric that implies there is something inherently right or wrong about different systems for organizing schools and…

  9. Brookhaven National Laboratory technology transfer report, fiscal year 1986

    International Nuclear Information System (INIS)

    1986-01-01

    An increase in the activities of the Office of Research and Technology Applications (ORTA) is reported. Most of the additional effort has been directed to the regional electric utility initiative, but intensive efforts have been applied to the commercialization of a compact synchrotron storage ring for x-ray lithography applications. At least six laboratory technologies are reported as having been transferred or being in the process of transfer. Laboratory accelerator technology is being applied to study radiation effects, and reactor technology is being applied for designing space reactors. Technologies being transferred and emerging technologies are described. The role of the ORTA and the technology transfer process are briefly described, and application assessment records are given for a number of technologies. A mini-incubator facility is also described

  10. Brookhaven National Laboratory technology transfer report, fiscal year 1986

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    An increase in the activities of the Office of Research and Technology Applications (ORTA) is reported. Most of the additional effort has been directed to the regional electric utility initiative, but intensive efforts have been applied to the commercialization of a compact synchrotron storage ring for x-ray lithography applications. At least six laboratory technologies are reported as having been transferred or being in the process of transfer. Laboratory accelerator technology is being applied to study radiation effects, and reactor technology is being applied for designing space reactors. Technologies being transferred and emerging technologies are described. The role of the ORTA and the technology transfer process are briefly described, and application assessment records are given for a number of technologies. A mini-incubator facility is also described. (LEW)

  11. Preparation of BAT (best available technology) instruction sheets for the EIPPC Directive; Erarbeiten von BVT(Beste-Verfuegbare-Technik)-Merkblaettern zur EG-IVU-Richtlinie

    Energy Technology Data Exchange (ETDEWEB)

    Lange, M.; Reichel, A. [Umweltbundesamt, Berlin (Germany)

    1999-07-01

    Council Directive 96/61/EC of 24/09/1996, which deals with integrated pollution prevention and control (IPPC Directive), aims for a high standard of protection for the environment as a whole: thus, it makes the construction of large industrial plants contingent on an integrated licensing procedure with public participation. Determining emission limit values on the basis of the best available technology (BAT) forms the core element of the licensing procedure. The requirements of the IPPC Directive are to be transposed into national law by 30/10/1999. To provide a framework for Article 16 (2), the European Commission has swiftly and purposefully organised an exchange of information for determining what is to be considered the best technology available. This has involved the preparation of BTA instruction sheets for industrial sectors affected by the IPPC Directive. This paper reports on the organisational structure and content of the information exchange accompanying the preparation of the BAT instruction sheets. It also provides information on the goals and organisation of the German contribution, in which the Federal Environmental Office plays a pivotal role as ''National Focal Point''. [German] Die Richtlinie 96/61/EG des Rates vom 24.09.1996 ueber die integrierte Vermeidung und Verminderung der Umweltverschmutzung (IVU-Richtlinie) zielt auf ein hohes Schutzniveau fuer die Umwelt als Ganzes; sie verlangt fuer grosse Industrieanlagen eine integrierte Genehmigung mit Oeffentlichkeitsbeteiligung. Kernelement der Anlagengenehmigung ist die Festlegung von Emissionsgrenzwerten auf der Grundlage der Besten Verfuegbaren Techniken (BVT). Die Anforderungen der IVU-Richtlinie sind bis zum 30.10.1999 in nationales Recht umzusetzen. Die Europaeische Kommission hat fruehzeitig und zielstrebig zur Ausfuellung von Artikel 16(2) im Hinblick auf die Ermittlung der Besten Verfuegbaren Techniken einen Informationsaustausch organisiert. Dabei werden BVT

  12. Overview of NASA Magnet and Linear Alternator Research Efforts

    Science.gov (United States)

    Geng, Steven M.; Niedra, Janis M.; Schwarze, Gene E.

    2005-02-01

    The Department of Energy, Lockheed Martin, Stirling Technology Company, and NASA Glenn Research Center are developing a high-efficiency, 110 watt Stirling Radioisotope Generator (SRG110) for NASA Space Science missions. NASA Glenn is conducting in-house research on rare earth permanent magnets and on linear alternators to assist in developing a free-piston Stirling convertor for the SRG110 and for developing advanced technology. The permanent magnet research efforts include magnet characterization, short-term magnet aging tests, and long-term magnet aging tests. Linear alternator research efforts have begun just recently at GRC with the characterization of a moving iron type linear alternator using GRC's alternator test rig. This paper reports on the progress and future plans of GRC's magnet and linear alternator research efforts.

  13. Twelve-bit 20-GHz reduced size pipeline accumulator in 0.25 μm SiGe:C technology for direct digital synthesiser applications

    DEFF Research Database (Denmark)

    Jensen, Brian Sveistrup; Khafaji, M. M.; Johansen, T. K.

    2012-01-01

    /Fmax of 180/220 GHz. The accumulator architecture omits the pre-skewing registers of the pipeline, thereby lowering both power consumption and circuit complexity. Some limitations to this design are discussed and the necessary equations for determining the phase jump encountered each time the control word...... (synthesised frequency) is changed are presented. For many applications employing signal processing after detection, this phase shift can then be corrected for. Compared to a full pipeline architecture (omitting the input circuitry for the most significant bit, as is customary for such designs......This article presents a 20 GHz, 12-bit pipeline accumulator with a reduced number of registers, suitable for direct digital synthesiser (DDS) applications. The accumulator is implemented in the IHP SG25H1 (0.25 μm) SiGe:C technology featuring heterojunction bipolar transistors (HBTs) with Ft...

  14. Twelve-bit 20-GHz reduced size pipeline accumulator in 0.25 µm SiGe:C technology for direct digital synthesiser applications

    DEFF Research Database (Denmark)

    Jensen, Brian Sveistrup; Khafaji, M. Mahdi; Johansen, Tom Keinicke

    2012-01-01

    /Fmax of 180/220 GHz respectively. The accumulator architecture omits the pre-skewing registers of the pipeline, thereby lowering both power consumption and circuit complexity. Some limitations to this design are discussed and the necessary equations for determining the phase jump encountered each time......This article presents a 20 GHz, 12-bit pipeline accumulator with a reduced number of registers, suitable for direct digital synthesizer (DDS) applications. The accumulator is implemented in the IHP SG25H1 (0.25um) SiGe:C technology featuring heterojunction bipolar transistors (HBT) with Ft...... the control word (synthesized frequency) is changed are presented. For many applications employing signal processing after detection, this phase shift can then be corrected for. Compared to a full pipeline architecture, the implemented 12-bit accumulator reduces the number of registers by 55% and the power...

  15. Technology Development and Innovation | Wind | NREL

    Science.gov (United States)

    Technology Development and Innovation Technology Development and Innovation Technology Development Technology Center (NWTC) supports efforts to reduce bird and bat fatalities at wind energy projects and photo of wind turbines at the National Wind Technology Center. Wildlife technology research and

  16. Gas-Fired Distributed Energy Resource Technology Characterizations

    Energy Technology Data Exchange (ETDEWEB)

    Goldstein, L.; Hedman, B.; Knowles, D.; Freedman, S. I.; Woods, R.; Schweizer, T.

    2003-11-01

    The U. S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) is directing substantial programs in the development and encouragement of new energy technologies. Among them are renewable energy and distributed energy resource technologies. As part of its ongoing effort to document the status and potential of these technologies, DOE EERE directed the National Renewable Energy Laboratory to lead an effort to develop and publish Distributed Energy Technology Characterizations (TCs) that would provide both the department and energy community with a consistent and objective set of cost and performance data in prospective electric-power generation applications in the United States. Toward that goal, DOE/EERE - joined by the Electric Power Research Institute (EPRI) - published the Renewable Energy Technology Characterizations in December 1997.As a follow-up, DOE EERE - joined by the Gas Research Institute - is now publishing this document, Gas-Fired Distributed Energy Resource Technology Characterizations.

  17. UPVG efforts to commercialize photovoltaics

    International Nuclear Information System (INIS)

    Serfass, J.A.; Wills, B.N.

    1995-01-01

    The Utility PhotoVoltaic Group (UPVG) was formed in October of 1992 with a mission to accelerate the use of cost-effective small-scale and emerging grid-connected applications of photovoltaics for the benefit of electric utilities and their customers. The UPVG is now implementing a program to install up to 50 megawatts of photovoltaics in small-scale and grid-connected applications. This program, called TEAM-UP, is a partnership of the US electric utility industry and the US Department of Energy to help develop utility PV markets. TEAM-UP is a utility-directed program to significantly increase utility PV experience by promoting installations of utility PV systems. Two primary program areas are proposed for TEAM-UP: (1) Small-Scale Applications (SSA)--an initiative to aggregate utility purchases of small-scale, grid-independent applications; and (2) Grid-Connected Applications (GCA)--an initiative to identify and competitively award cost-sharing contracts for grid-connected PV systems with high market growth potential, or collective purchase programs involving multiple buyers. This paper describes these programs and outlines the schedule, the procurement status, and the results of the TEAM-UP process

  18. QuEST: Qualifying Environmentally Sustainable Technologies

    Science.gov (United States)

    Lewis, Pattie

    2012-01-01

    Articles in this issue inlude: (1) Foundation of Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM) Technology Evaluation is Testing and Qualification, (2) Materials Management and Substitution Efforts, (3 Recycling and Pollution Control Efforts, and (4) Remediation Efforts

  19. Survey and analysis of federally developed technology

    Energy Technology Data Exchange (ETDEWEB)

    Reed, J.E.; Conrad, J.L.

    1983-02-01

    The methodology and results of a test effort to determine whether there exist unexpected opportunities for the direct transfer of technologies from federal laboratories to industry are presented. Specifically, the latest results of six federal laboratories with potential application in the pulp and paper industry, particularly those results applicable to improving energy productivity, were evaluated, cataloged, and distributed to industry representatives to gauge their reaction. The principal methodological steps in this effort were the development of a taxonomy of the pulp and paper industry, identification of industry needs and laboratory capabilities, laboratory visits, review of technology findings with industry, and evaluation and compilation of industry responses.

  20. Technology integration plan

    International Nuclear Information System (INIS)

    Henry, R.; Sumpter, K.C.

    1995-01-01

    In 1992, the Secretary of Energy directed the Assistant Secretary for Environmental Management (EM) to develop an integrated, long-term, spent nuclear fuel (SNF) management program. In response, EM created the Integrated SNF Program to assess the US Department of Energy (DOE) SNF and SNF storage facilities. As shown in Figure 1 the Integrated SNF Program is responsible for life-cycle management of DOE SNF; that is characterization, processing, interim storage and preparation for disposal. In order to implement the Program it was recognized that technology needs must be identified. A Technology Integration Program was formed to integrate the DOE complex-wide efforts for establishing timely, cost effective and consistent technical criteria for the development of technical solutions. The program is directed toward identification of: (a) what activities need to be done, (b) when they need to be completed, and (c) what priority should be assigned to the various activities

  1. Self-regulating the effortful "social dos".

    Science.gov (United States)

    Cortes, Kassandra; Kammrath, Lara K; Scholer, Abigail A; Peetz, Johanna

    2014-03-01

    In the current research, we explored differences in the self-regulation of the personal dos (i.e., engaging in active and effortful behaviors that benefit the self) and in the self-regulation of the social dos (engaging in those same effortful behaviors to benefit someone else). In 6 studies, we examined whether the same trait self-control abilities that predict task persistence on personal dos would also predict task persistence on social dos. That is, would the same behavior, such as persisting through a tedious and attentionally demanding task, show different associations with trait self-control when it is framed as benefitting the self versus someone else? In Studies 1-3, we directly compared the personal and social dos and found that trait self-control predicted self-reported and behavioral personal dos but not social dos, even when the behaviors were identical and when the incentives were matched. Instead, trait agreeableness--a trait linked to successful self-regulation within the social domain--predicted the social dos. Trait self-control did not predict the social dos even when task difficulty increased (Study 4), but it did predict the social don'ts, consistent with past research (Studies 5-6). The current studies provide support for the importance of distinguishing different domains of self-regulated behaviors and suggest that social dos can be successfully performed through routes other than traditional self-control abilities. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

  2. Nano technology

    International Nuclear Information System (INIS)

    Lee, In Sik

    2002-03-01

    This book is introduction of nano technology, which describes what nano technology is, alpha and omega of nano technology, the future of Korean nano technology and human being's future and nano technology. The contents of this book are nano period is coming, a engine of creation, what is molecular engineering, a huge nano technology, technique on making small things, nano materials with exorbitant possibility, the key of nano world the most desirable nano technology in bio industry, nano development plan of government, the direction of development for nano technology and children of heart.

  3. Directions in advanced reactor technology

    International Nuclear Information System (INIS)

    Golay, M.W.

    1990-01-01

    Successful nuclear power plant concepts must simultaneously performance in terms of both safety and economics. To be attractive to both electric utility companies and the public, such plants must produce economical electric energy consistent with a level of safety which is acceptable to both the public and the plant owner. Programs for reactor development worldwide can be classified according to whether the reactor concept pursues improved safety or improved economic performance as the primary objective. When improved safety is the primary goal, safety enters the solution of the design problem as a constraint which restricts the set of allowed solutions. Conversely, when improved economic performance is the primary goal, it is allowed to be pursued only to an extent which is compatible with stringent safety requirements. The three major reactor coolants under consideration for future advanced reactor use are water, helium and sodium. Reactor development programs focuses upon safety and upon economics using each coolant are being pursued worldwide. These programs are discussed

  4. Measuring collections effort improves cash performance.

    Science.gov (United States)

    Shutts, Joe

    2009-09-01

    Having a satisfied work force can lead to an improved collections effort. Hiring the right people and training them ensures employee engagement. Measuring collections effort and offering incentives is key to revenue cycle success.

  5. Supporting Students as Scientists: One Mission's Efforts

    Science.gov (United States)

    Taylor, J.; Chambers, L. H.; Trepte, C. R.

    2012-12-01

    NASA's CALIPSO satellite mission provides an array of opportunities for teachers, students, and the general public. In developing our latest plan for education and public outreach, CALIPSO focused on efforts that would support students as scientists. CALIPSO EPO activities are aimed at inspiring young scientists through multiple avenues of potential contact, including: educator professional development, student-scientist mentoring, curriculum resource development, and public outreach through collaborative mission efforts. In this session, we will explore how these avenues complement one another and take a closer look at the development of the educator professional development activities. As part of CALIPSO's EPO efforts, we have developed the GLOBE Atmosphere Investigations Programs (AIP). The program encourages students to engage in authentic science through research on the atmosphere. The National Research Council (NRC) has emphasized the importance of teaching scientific inquiry in the National Science Education Standards (1996, 2000) and scientific practice in the recent Framework for K-12 Science Education (2011). In order to encourage student-centered science inquiry, teacher training utilizing GLOBE Atmosphere Investigations and GLOBE's Student Research Process are provided to middle and high school teachers to assist them in incorporating real scientific investigations into their classroom. Through participation in the program, teachers become a part of GLOBE (Global Learning and Observations to Benefit the Environment) - an international community of teachers, students, and scientists studying environmental science in over 24,000 schools around the world. The program uses NASA's satellites and the collection of atmosphere data by students to provide an engaging science learning experience for the students, and teachers. The GLOBE Atmosphere Investigations program offers year-long support to both teachers and students through direct involvement with NASA

  6. Technologies for hydrogen production based on direct contact of gaseous hydrocarbons and evaporated water with Molten Pb or Pb-Bi

    International Nuclear Information System (INIS)

    Gulevich, A. V.; Martynov, P. N.; Gulevsky, V. A.; Ulyanov, V. V.

    2007-01-01

    Results of studies intended for the substantiation of a new energy-saving and safe technology for low cost hydrogen production have been presented. The technology's basis is direct mixing of water and (or) gaseous hydrocarbons with heavy liquid metal coolants (HLMC) Pb or Pb-Bi. Preliminary research has been done on thermal dynamics and kinetics of the processes taking place in the interaction of HLMC with hydrocarbon-containing gases. It has been shown as a result that water and gaseous hydrocarbons interact with molten Pb and Pb-Bi relatively quietly in chemical aspect (without ignition and explosions). Therefore, (and taking into account the thermal physics, physical and chemical properties of HLMC such as low pressure of saturated vapor of Pb and Pb- Bi in enhanced temperatures, their good heat conductivity and heat capacity, low viscosity, etc.) heat transfer is possible from the molten metal to water and hydrocarbons without heat transferring partitions (that is, by direct contact of the working media). Devices to implement this method of heating liquid and gaseous media provide essential advantages: - A simple design; - None heat-transferring surfaces subject to corrosion, contamination, thermal fatigue, vibration impacts; - A high effectiveness owing to a larger heat exchanging surface per volume unit; - A small hydraulic resistance. The possibility and effectiveness of heating various gaseous and liquid media in their direct contact with molten Pb and Pb-Bi has been substantiated convincingly by experimental results at IPPE. Besides, the following processes of hydrogen-containing media conversion have been proved feasible thereby. 1. Water decomposition into hydrogen and oxygen. The process can develop at temperatures of 400-1000 degree C. It is necessary to provide constant removal of oxygen from the reaction zone and maintain a minimum possible content of chemically active oxygen in the melt. 2. Pyrolytic decomposition of hydrocarbons into carbon and

  7. Cognitive dissonance in children: justification of effort or contrast?

    Science.gov (United States)

    Alessandri, Jérôme; Darcheville, Jean-Claude; Zentall, Thomas R

    2008-06-01

    Justification of effort is a form of cognitive dissonance in which the subjective value of an outcome is directly related to the effort that went into obtaining it. However, it is likely that in social contexts (such as the requirements for joining a group) an inference can be made (perhaps incorrectly) that an outcome that requires greater effort to obtain in fact has greater value. Here we present evidence that a cognitive dissonance effect can be found in children under conditions that offer better control for the social value of the outcome. This effect is quite similar to contrast effects that recently have been studied in animals. We suggest that contrast between the effort required to obtain the outcome and the outcome itself provides a more parsimonious account of this phenomenon and perhaps other related cognitive dissonance phenomena as well. Research will be needed to identify cognitive dissonance processes that are different from contrast effects of this kind.

  8. Future direction of direct writing

    Science.gov (United States)

    Kim, Nam-Soo; Han, Kenneth N.

    2010-11-01

    Direct write technology using special inks consisting of finely dispersed metal nanoparticles in liquid is receiving an undivided attention in recent years for its wide range of applicability in modern electronic industry. The application of this technology covers radio frequency identification-tag (RFID-tag), flexible-electronics, organic light emitting diodes (OLED) display, e-paper, antenna, bumpers used in flip-chip, underfilling, frit, miniresistance applications and biological uses, artificial dental applications and many more. In this paper, the authors have reviewed various direct write technologies on the market and discussed their advantages and shortfalls. Emphasis has given on microdispensing deposition write (MDDW), maskless mesoscale materials deposition (M3D), and ink-jet technologies. All of these technologies allow printing various patterns without employing a mask or a resist with an enhanced speed with the aid of computer. MDDW and M3D are capable of drawing patterns in three-dimension and MDDW, in particular, is capable of writing nanoinks with high viscosity. However, it is still far away for direct write to be fully implemented in the commercial arena. One of the hurdles to overcome is in manufacturing conductive inks which are chemically and physically stable, capable of drawing patterns with acceptable conductivity, and also capable of drawing patterns with acceptable adhesiveness with the substrates. The authors have briefly discussed problems involved in manufacturing nanometal inks to be used in various writing devices. There are numerous factors to be considered in manufacturing such inks. They are reducing agents, concentrations, oxidation, compact ability allowing good conductivity, and stability in suspension.

  9. PROBABILISTIC RISK ANALYSIS OF REMEDIATION EFFORTS IN NAPL SITES

    Science.gov (United States)

    Fernandez-Garcia, D.; de Vries, L.; Pool, M.; Sapriza, G.; Sanchez-Vila, X.; Bolster, D.; Tartakovsky, D. M.

    2009-12-01

    The release of non-aqueous phase liquids (NAPLs) such as petroleum hydrocarbons and chlorinated solvents in the subsurface is a severe source of groundwater and vapor contamination. Because these liquids are essentially immiscible due to low solubility, these contaminants get slowly dissolved in groundwater and/or volatilized in the vadoze zone threatening the environment and public health over a long period. Many remediation technologies and strategies have been developed in the last decades for restoring the water quality properties of these contaminated sites. The failure of an on-site treatment technology application is often due to the unnoticed presence of dissolved NAPL entrapped in low permeability areas (heterogeneity) and/or the remaining of substantial amounts of pure phase after remediation efforts. Full understanding of the impact of remediation efforts is complicated due to the role of many interlink physical and biochemical processes taking place through several potential pathways of exposure to multiple receptors in a highly unknown heterogeneous environment. Due to these difficulties, the design of remediation strategies and definition of remediation endpoints have been traditionally determined without quantifying the risk associated with the failure of such efforts. We conduct a probabilistic risk assessment of the likelihood of success of an on-site NAPL treatment technology that easily integrates all aspects of the problem (causes, pathways, and receptors). Thus, the methodology allows combining the probability of failure of a remediation effort due to multiple causes, each one associated to several pathways and receptors.

  10. Carbon emissions in China: How far can new efforts bend the curve?

    International Nuclear Information System (INIS)

    Zhang, Xiliang; Karplus, Valerie J.; Qi, Tianyu; Zhang, Da; He, Jiankun

    2016-01-01

    While China is on track to meet its global climate commitments through 2020, China's post-2020 CO_2 emissions trajectory is highly uncertain, with projections varying widely across studies. Over the past year, the Chinese government has announced new policy directives to deepen economic reform, to protect the environment, and to limit fossil energy use in China. To evaluate how new policy directives could affect energy and climate change outcomes, we simulate two levels of policy effort—a continued effort scenario that extends current policies beyond 2020 and an accelerated effort scenario that reflects newly announced policies—on the evolution of China's energy and economic system over the next several decades. We perform simulations using the China-in-Global Energy Model, C-GEM, a bespoke recursive-dynamic computable general equilibrium model with global coverage and detailed calibration of China's economy and future trends. Importantly, we find that both levels of policy effort would bend down the CO_2 emissions trajectory before 2050 without undermining economic development. Specifically, in the accelerated effort scenario, we find that coal use peaks around 2020, and CO_2 emissions level off around 2030 at 10 bmt, without undermining continued economic growth consistent with China reaching the status of a “well-off society” by 2050. - Highlights: • We develop a simulation model that captures energy system and technological detail in China. • We simulate China's recently announced climate and energy policies. • New policies in China are consistent with peak coal around 2020, and peak CO_2 emissions around 2030. • New policies cause modest leakage of coal use outside of China, especially to Southeast Asia.

  11. Study of device mass production capability of the character projection based electron beam direct writing process technology toward 14 nm node and beyond

    Science.gov (United States)

    Kojima, Yoshinori; Takahashi, Yasushi; Takakuwa, Masaki; Ohshio, Shuzo; Sugatani, Shinji; Tujimura, Ryo; Takita, Hiroshi; Ogino, Kozo; Hoshino, Hiromi; Ito, Yoshio; Miyajima, Masaaki; Kon, Jun-ichi

    2012-03-01

    Techniques to appropriately control the key factors for a character projection (CP) based electron beam direct writing (EBDW) technology for mass production are shown and discussed. In order to achieve accurate CD control, the CP technique using the master CP is adopted. Another CP technique, the Packed CP, is used to obtain suitable shot count. For the alignment on the some critical layers which have the normally an even surface, the alignment methodology differ from photolithography is required. The process that etches the SiO2 material in the shallow trench isolation is added and then the alignment marks can be detected using electron beam even at the gate layer, which is normally on an even surface. The proximity effect correction using the simplified electron energy flux model and the hybrid exposure are used to obtain enough process margins. As a result, the sufficient CD accuracy, overlay accuracy, and yield are obtained on the 65 nm node device. The condition in our system is checked using self-diagnosis on a regular basis, and scheduled maintenances have been properly performed. Due to the proper system control, more than 10,000 production wafers have been successfully exposed so far without any major system downtime. It is shown that those techniques can be adapted to the 32 nm node production with slight modifications. For the 14 nm node and beyond, however, the drastic increment of the shot count becomes more of a concern. The Multi column cell (MCC) exposure method, the key concept of which is the parallelization of the electron beam columns with a CP, can overcome this concern. It is expected that by using the MCC exposure system, those techniques will be applicable to the rapid establishment for the 14 nm node technology.

  12. Comparative assessment of world research efforts on magnetic confinement fusion

    International Nuclear Information System (INIS)

    McKenney, B.L.; McGrain, M.; Rutherford, P.H.

    1990-02-01

    This report presents a comparative assessment of the world's four major research efforts on magnetic confinement fusion, including a comparison of the capabilities in the Soviet Union, the European Community (Western Europe), Japan, and the United States. A comparative evaluation is provided in six areas: tokamak confinement; alternate confinement approaches; plasma technology and engineering; and fusion computations. The panel members are involved actively in fusion-related research, and have extensive experience in previous assessments and reviews of the world's four major fusion programs. Although the world's four major fusion efforts are roughly comparable in overall capabilities, two conclusions of this report are inescapable. First, the Soviet fusion effort is presently the weakest of the four programs in most areas of the assessment. Second, if present trends continue, the United States, once unambiguously the world leader in fusion research, will soon lose its position of leadership to the West European and Japanese fusion programs. Indeed, before the middle 1990s, the upgraded large-tokamak facilities, JT-60U (Japan) and JET (Western Europe), are likely to explore plasma conditions and operating regimes well beyond the capabilities of the TFTR tokamak (United States). In addition, if present trends continue in the areas of fusion nuclear technology and materials, and plasma technology and materials, and plasma technology development, the capabilities of Japan and Western Europe in these areas (both with regard to test facilities and fusion-specific industrial capabilities) will surpass those of the United States by a substantial margin before the middle 1990s

  13. Direct analysis in real time mass spectrometry, a process analytical technology tool for real-time process monitoring in botanical drug manufacturing.

    Science.gov (United States)

    Wang, Lu; Zeng, Shanshan; Chen, Teng; Qu, Haibin

    2014-03-01

    A promising process analytical technology (PAT) tool has been introduced for batch processes monitoring. Direct analysis in real time mass spectrometry (DART-MS), a means of rapid fingerprint analysis, was applied to a percolation process with multi-constituent substances for an anti-cancer botanical preparation. Fifteen batches were carried out, including ten normal operations and five abnormal batches with artificial variations. The obtained multivariate data were analyzed by a multi-way partial least squares (MPLS) model. Control trajectories were derived from eight normal batches, and the qualification was tested by R(2) and Q(2). Accuracy and diagnosis capability of the batch model were then validated by the remaining batches. Assisted with high performance liquid chromatography (HPLC) determination, process faults were explained by corresponding variable contributions. Furthermore, a batch level model was developed to compare and assess the model performance. The present study has demonstrated that DART-MS is very promising in process monitoring in botanical manufacturing. Compared with general PAT tools, DART-MS offers a particular account on effective compositions and can be potentially used to improve batch quality and process consistency of samples in complex matrices. Copyright © 2014 Elsevier B.V. All rights reserved.

  14. Technology and Research Requirements for Combating Human Trafficking: Enhancing Communication, Analysis, Reporting, and Information Sharing

    Energy Technology Data Exchange (ETDEWEB)

    Kreyling, Sean J.; West, Curtis L.; Olson, Jarrod

    2011-03-17

    DHS’ Science & Technology Directorate directed PNNL to conduct an exploratory study on the domain of human trafficking in the Pacific Northwest in order to examine and identify technology and research requirements for enhancing communication, analysis, reporting, and information sharing – activities that directly support efforts to track, identify, deter, and prosecute human trafficking – including identification of potential national threats from smuggling and trafficking networks. This effort was conducted under the Knowledge Management Technologies Portfolio as part of the Integrated Federal, State, and Local/Regional Information Sharing (RISC) and Collaboration Program.

  15. Pocket money and child effort at school

    OpenAIRE

    François-Charles Wolff; Christine Barnet-Verzat

    2008-01-01

    In this paper, we study the relationship between the provision of parental pocket and the level of effort undertaken by the child at school. Under altruism, an increased amount of parental transfer should reduce the child's effort. Our empirical analysis is based on a French data set including about 1,400 parent-child pairs. We find that children do not undertake less effort when their parents are more generous.

  16. Incentive Design and Mis-Allocated Effort

    OpenAIRE

    Schnedler, Wendelin

    2013-01-01

    Incentives often distort behavior: they induce agents to exert effort but this effort is not employed optimally. This paper proposes a theory of incentive design allowing for such distorted behavior. At the heart of the theory is a trade-off between getting the agent to exert effort and ensuring that this effort is used well. The theory covers various moral-hazard models, ranging from traditional single-task to multi-task models. It also provides -for the first time- a formalization and proof...

  17. Dealing with metadata quality: the legacy of digital library efforts

    OpenAIRE

    Tani, Alice; Candela, Leonardo; Castelli, Donatella

    2013-01-01

    In this work, we elaborate on the meaning of metadata quality by surveying efforts and experiences matured in the digital library domain. In particular, an overview of the frameworks developed to characterize such a multi-faceted concept is presented. Moreover, the most common quality-related problems affecting metadata both during the creation and the aggregation phase are discussed together with the approaches, technologies and tools developed to mitigate them. This survey on digital librar...

  18. The contribution of Earth observation technologies to the reporting obligations of the Habitats Directive and Natura 2000 network in a protected wetland

    Directory of Open Access Journals (Sweden)

    Adrián Regos

    2018-03-01

    Full Text Available Background Wetlands are highly productive systems that supply a host of ecosystem services and benefits. Nonetheless, wetlands have been drained and filled to provide sites for building houses and roads and for establishing farmland, with an estimated worldwide loss of 64–71% of wetland systems since 1900. In Europe, the Natura 2000 network is the cornerstone of current conservation strategies. Every six years, Member States must report on implementation of the European Habitats Directive. The present study aims to illustrate how Earth observation (EO technologies can contribute to the reporting obligations of the Habitats Directive and Natura 2000 network in relation to wetland ecosystems. Methods We analysed the habitat changes that occurred in a protected wetland (in NW Spain, 13 years after its designation as Natura 2000 site (i.e., between 2003 and 2016. For this purpose, we analysed optical multispectral bands and water-related and vegetation indices derived from data acquired by Landsat 7 TM, ETM+ and Landsat 8 OLI sensors. To quantify the uncertainty arising from the algorithm used in the classification procedure and its impact on the change analysis, we compared the habitat change estimates obtained using 10 different classification algorithms and two ensemble classification approaches (majority and weighted vote. Results The habitat maps derived from the ensemble approaches showed an overall accuracy of 94% for the 2003 data (Kappa index of 0.93 and of 95% for the 2016 data (Kappa index of 0.94. The change analysis revealed important temporal dynamics between 2003 and 2016 for the habitat classes identified in the study area. However, these changes depended on the classification algorithm used. The habitat maps obtained from the two ensemble classification approaches showed a reduction in habitat classes dominated by salt marshes and meadows (24.6–26.5%, natural and semi-natural grasslands (25.9–26.5% or sand dunes (20.7–20

  19. Application of advanced technology to space automation

    Science.gov (United States)

    Schappell, R. T.; Polhemus, J. T.; Lowrie, J. W.; Hughes, C. A.; Stephens, J. R.; Chang, C. Y.

    1979-01-01

    Automated operations in space provide the key to optimized mission design and data acquisition at minimum cost for the future. The results of this study strongly accentuate this statement and should provide further incentive for immediate development of specific automtion technology as defined herein. Essential automation technology requirements were identified for future programs. The study was undertaken to address the future role of automation in the space program, the potential benefits to be derived, and the technology efforts that should be directed toward obtaining these benefits.

  20. Chicago Operations Office: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-01

    This document has been prepared by the Department of Energy`s (DOE) Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation (RDDT and E) activities funded through the Chicago Operations Office. Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US Industry`s competitiveness in global environmental markets. The information has been assembled from recently produced OTD documents which highlight technology development activities within each of the OTD program elements. OTD technologies addresses three specific problem areas: (1) groundwater and soils cleanup; (2) waste retrieval and processing; and (3) pollution prevention. These problems are not unique to DOE, but are associated with other Federal agency and industry sites as well. Thus, technical solutions developed within OTD programs will benefit DOE, and should have direct applications in outside markets.

  1. Chicago Operations Office: Technology summary

    International Nuclear Information System (INIS)

    1994-12-01

    This document has been prepared by the Department of Energy's (DOE) Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation (RDDT and E) activities funded through the Chicago Operations Office. Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US Industry's competitiveness in global environmental markets. The information has been assembled from recently produced OTD documents which highlight technology development activities within each of the OTD program elements. OTD technologies addresses three specific problem areas: (1) groundwater and soils cleanup; (2) waste retrieval and processing; and (3) pollution prevention. These problems are not unique to DOE, but are associated with other Federal agency and industry sites as well. Thus, technical solutions developed within OTD programs will benefit DOE, and should have direct applications in outside markets

  2. Time preferences, study effort, and academic performance

    NARCIS (Netherlands)

    Non, J.A.; Tempelaar, D.T.

    2014-01-01

    We analyze the relation between time preferences, study effort, and academic performance among first-year Business and Economics students. Time preferences are measured by stated preferences for an immediate payment over larger delayed payments. Data on study efforts are derived from an electronic

  3. Dopamine and Effort-Based Decision Making

    Directory of Open Access Journals (Sweden)

    Irma Triasih Kurniawan

    2011-06-01

    Full Text Available Motivational theories of choice focus on the influence of goal values and strength of reinforcement to explain behavior. By contrast relatively little is known concerning how the cost of an action, such as effort expended, contributes to a decision to act. Effort-based decision making addresses how we make an action choice based on an integration of action and goal values. Here we review behavioral and neurobiological data regarding the representation of effort as action cost, and how this impacts on decision making. Although organisms expend effort to obtain a desired reward there is a striking sensitivity to the amount of effort required, such that the net preference for an action decreases as effort cost increases. We discuss the contribution of the neurotransmitter dopamine (DA towards overcoming response costs and in enhancing an animal’s motivation towards effortful actions. We also consider the contribution of brain structures, including the basal ganglia (BG and anterior cingulate cortex (ACC, in the internal generation of action involving a translation of reward expectation into effortful action.

  4. Listening Effort With Cochlear Implant Simulations

    NARCIS (Netherlands)

    Pals, Carina; Sarampalis, Anastasios; Başkent, Deniz

    2013-01-01

    Purpose: Fitting a cochlear implant (CI) for optimal speech perception does not necessarily optimize listening effort. This study aimed to show that listening effort may change between CI processing conditions for which speech intelligibility remains constant. Method: Nineteen normal-hearing

  5. Effort and Selection Effects of Incentive Contracts

    NARCIS (Netherlands)

    Bouwens, J.F.M.G.; van Lent, L.A.G.M.

    2003-01-01

    We show that the improved effort of employees associated with incentive contracts depends on the properties of the performance measures used in the contract.We also find that the power of incentives in the contract is only indirectly related to any improved employee effort.High powered incentive

  6. The Effect of Age on Listening Effort

    Science.gov (United States)

    Degeest, Sofie; Keppler, Hannah; Corthals, Paul

    2015-01-01

    Purpose: The objective of this study was to investigate the effect of age on listening effort. Method: A dual-task paradigm was used to evaluate listening effort in different conditions of background noise. Sixty adults ranging in age from 20 to 77 years were included. A primary speech-recognition task and a secondary memory task were performed…

  7. Partnership for Environmental Technology Education

    International Nuclear Information System (INIS)

    Dickinson, Paul R.; Fosse, Richard

    1992-01-01

    The need for broad cooperative effort directed toward the enhancement of science and mathematics education, including environmental science and technology has been recognized as a national priority by government, industry, and the academic community alike. In an effort to address this need, the Partnership for Environmental Technology Education (PETE) has been established in the five western states of Arizona, California, Hawaii, Nevada and Utah. PETE'S overall objectives are to link the technical resources of the DOE, ERA, and NASA Laboratories and private industry with participating community colleges to assist in the development and presentation of curricula for training environmental-Hazardous Materials Technicians and to encourage more transfer students to pursue studies in environmental science at four-year institutions. The program is co-sponsored by DOE and EPA. DoD participation is proposed. PETE is being evaluated by its sponsors as a regional pilot with potential for extension nationally. (author)

  8. Low-effort thought promotes political conservatism.

    Science.gov (United States)

    Eidelman, Scott; Crandall, Christian S; Goodman, Jeffrey A; Blanchar, John C

    2012-06-01

    The authors test the hypothesis that low-effort thought promotes political conservatism. In Study 1, alcohol intoxication was measured among bar patrons; as blood alcohol level increased, so did political conservatism (controlling for sex, education, and political identification). In Study 2, participants under cognitive load reported more conservative attitudes than their no-load counterparts. In Study 3, time pressure increased participants' endorsement of conservative terms. In Study 4, participants considering political terms in a cursory manner endorsed conservative terms more than those asked to cogitate; an indicator of effortful thought (recognition memory) partially mediated the relationship between processing effort and conservatism. Together these data suggest that political conservatism may be a process consequence of low-effort thought; when effortful, deliberate thought is disengaged, endorsement of conservative ideology increases.

  9. Strategy for research development and demonstration regarding hydrogen technology in Denmark. Hydrogen production. An account of production technologies against planning of a optimal danish effort within hydrogen; Strategi for forskning, udvikling og demonstration vedroerende brintteknologi i Danmark. Brintproduktion - Gennemgang af produktionsteknologier med henblik pae planlaegning af en optimal dansk indsats pae brintomraedet

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-12-01

    This report has been prepared as part of the Danish Energy Authorities' formulation of a Danish strategy for hydrogen as an energy carrier, especially within production of hydrogen and hydrogen-containing fuels. The working-group has defined hydrogen production as the chain of processes necessary to convert a specific energy into enough clean hydrogen or hydrogen-containing fuels. The work has focused on energy sources that can be converted to hydrogen directly, i.e. biomass, solar energy, electricity, and fossil sources. (BA)

  10. Selective area growth of InAs nanowires from SiO2/Si(1 1 1) templates direct-written by focused helium ion beam technology

    Science.gov (United States)

    Yang, Che-Wei; Chen, Wei-Chieh; Chou, Chieh; Lin, Hao-Hsiung

    2018-02-01

    We report on the selective area growth of InAs nanowires on patterned SiO2/Si (1 1 1) nano-holes, prepared by focused helium ion beam technology. We used a single spot mode, in which the focused helium ion beam was fixed on a single point with a He+-ion dosage, ranging from 1.5 pC to 8 pC, to drill the nano-holes. The smallest hole diameter achieved is ∼8 nm. We found that low He+-ion dosage is able to facilitate the nucleation of (1 1 1)B InAs on the highly mismatched Si, leading to the vertical growth of InAs nanowires (NWs). High He-ion dosage, on the contrary, severely damaged Si surface, resulting in tilted and stripe-like NWs. In addition to titled NW grown from (1 1 1)A InAs domain, a new titled growth direction due to defect induced twinning was observed. Cross-sectional TEM images of vertical NWs show mixed wurtizite (WZ) and zincblende (ZB) phases, while WZ phase dominants. The stacking faults resulting from the phase change is proportional to NW diameter, suggesting that the critical diameter of phase turning is larger than 110 nm, the maximum diameter of our NWs. Period of misfit dislocation at the InAs/Si interface of vertical NW is also found larger than the theoretical value when the diameter of heterointerface is smaller than 50 nm, indicating that the small contact area is able to accommodate the large lattice and thermal mismatch between InAs and Si.

  11. Additive manufacturing technology (direct metal laser sintering) as a novel approach to fabricate functionally graded titanium implants: preliminary investigation of fabrication parameters.

    Science.gov (United States)

    Lin, Wei-Shao; Starr, Thomas L; Harris, Bryan T; Zandinejad, Amirali; Morton, Dean

    2013-01-01

    This article describes the preliminary findings of the mechanical properties of functionally graded titanium with controlled distribution of porosity and a reduced Young's modulus on the basis of a computeraided design (CAD) file, using the rapid-prototyping, direct metal laser sintering (DMLS) technique. Sixty specimens of Ti-6Al-4V were created using a DMLS machine (M270) following the standard for tensile testing of metals. One group was fabricated with only 170 W of laser energy to create fully dense specimens (control group). The remaining specimens all featured an outer fully dense "skin" layer and a partially sintered porous inner "core" region. The outer "skin" of each specimen was scanned at 170 W and set at a thickness of 0.35, 1.00, or 1.50 mm for different specimen groups. The inner "core" of each specimen was scanned at a lower laser power (43 or 85 W). The partially sintered core was clearly visible in all specimens, with somewhat greater porosity with the lower laser power. However, the amount of porosity in the core region was not related to the laser power alone; thinner skin layers resulted in higher porosity for the same power values in the core structure. The lowest Young's modulus achieved, 35 GPa, is close to that of bone and was achieved with a laser power of 43 W and a skin thickness of 0.35 mm, producing a core that comprised 74% of the total volume. Additive manufacturing technology may provide an efficient alternative way to fabricate customized dental implants based on a CAD file with a functionally graded structure that may minimize stress shielding and improve the long-term performance of dental implants.

  12. Summary of NR Program Prometheus Efforts

    International Nuclear Information System (INIS)

    J Ashcroft; C Eshelman

    2006-01-01

    The Naval Reactors Program led work on the development of a reactor plant system for the Prometheus space reactor program. The work centered on a 200 kWe electric reactor plant with a 15-20 year mission applicable to nuclear electric propulsion (NEP). After a review of all reactor and energy conversion alternatives, a direct gas Brayton reactor plant was selected for further development. The work performed subsequent to this selection included preliminary nuclear reactor and reactor plant design, development of instrumentation and control techniques, modeling reactor plant operational features, development and testing of core and plant material options, and development of an overall project plan. Prior to restructuring of the program, substantial progress had been made on defining reference plant operating conditions, defining reactor mechanical, thermal and nuclear performance, understanding the capabilities and uncertainties provided by material alternatives, and planning non-nuclear and nuclear system testing. The mission requirements for the envisioned NEP missions cannot be accommodated with existing reactor technologies. Therefore concurrent design, development and testing would be needed to deliver a functional reactor system. Fuel and material performance beyond the current state of the art is needed. There is very little national infrastructure available for fast reactor nuclear testing and associated materials development and testing. Surface mission requirements may be different enough to warrant different reactor design approaches and development of a generic multi-purpose reactor requires substantial sacrifice in performance capability for each mission

  13. IAEA Patient Protection Effort Reaches Key Milestone

    International Nuclear Information System (INIS)

    2012-01-01

    Full text: An International Atomic Energy Agency (IAEA) effort to help people track their radiation exposure from medical procedures achieved a significant milestone this week. The Agency received the final approval from a group of medical oversight organizations for the 'Joint Position Statement on the IAEA Patient Radiation Exposure Tracking', a set of principles to guide patient protection efforts at the sub-national, national, and international level. The joint statement endorses the IAEA's three-year-old Smart Card/SmartRadTrack project, which aims to help nations develop systems to track medical radiation procedures and radiation doses. The statement has been agreed by the World Health Organization (WHO), the U.S. Food and Drug Administration (FDA), the European Society of Radiology (ESR), the International Organization for Medical Physics (IOMP), the International Society of Radiographers and Radiological Technologists (ISRRT), and the Conference of Radiation Control Program Directors, USA (CRCPD). 'This system is critical if the medical community is going to keep patients safe when they are being referred for more and more diagnostic scans. These scans, over the years, are made using more and more powerful machines', said Madan Rehani, Radiation Safety Specialist in the IAEA's Radiation Protection of Patients Unit. 'The tracking system will draw doctors' attention to previous radiological examinations, both in terms of clinical information and radiation dose and thus help them assess whether the 11th or 20th CT scan is really appropriate, whether it will do more good than harm.' Advances in radiation-based diagnostic technologies, such as the CT scan, have led to patients receiving such procedures more frequently. The convenience of CT with the added advantage of increased information has resulted in increased usage to the point that there are instances of patients getting tens of CT scans in a few years, not all of which may be justified, or getting CT

  14. Visual cues and listening effort: individual variability.

    Science.gov (United States)

    Picou, Erin M; Ricketts, Todd A; Hornsby, Benjamin W Y

    2011-10-01

    To investigate the effect of visual cues on listening effort as well as whether predictive variables such as working memory capacity (WMC) and lipreading ability affect the magnitude of listening effort. Twenty participants with normal hearing were tested using a paired-associates recall task in 2 conditions (quiet and noise) and 2 presentation modalities (audio only [AO] and auditory-visual [AV]). Signal-to-noise ratios were adjusted to provide matched speech recognition across audio-only and AV noise conditions. Also measured were subjective perceptions of listening effort and 2 predictive variables: (a) lipreading ability and (b) WMC. Objective and subjective results indicated that listening effort increased in the presence of noise, but on average the addition of visual cues did not significantly affect the magnitude of listening effort. Although there was substantial individual variability, on average participants who were better lipreaders or had larger WMCs demonstrated reduced listening effort in noise in AV conditions. Overall, the results support the hypothesis that integrating auditory and visual cues requires cognitive resources in some participants. The data indicate that low lipreading ability or low WMC is associated with relatively effortful integration of auditory and visual information in noise.

  15. APA efforts in promoting human rights and social justice.

    Science.gov (United States)

    Leong, Frederick T L; Pickren, Wade E; Vasquez, Melba J T

    2017-11-01

    This article reviews the American Psychological Association's (APA) efforts in promoting human rights and social justice. Beginning with a historical review of the conceptualizations of human rights and social justice, the social challenges that have faced the United States over time are discussed in relation to the APA's evolving mission and strategic initiatives enacted through its boards, committees, and directorates. From early efforts on the Board for Social and Ethical Responsibility in Psychology and the Board of Ethnic Minority Affairs to the establishment of the Public Interest Directorate, the APA's efforts to address these human rights and social justice challenges through its task force reports, guidelines, and policies are described. Specifically, issues related to diversity and underrepresentation of minority group members and perspective within the APA, as well as women's issues (prochoice, violence against women, sexualization of young girls, human trafficking) were central to these efforts. These minority groups included racial and ethnic minority groups; immigrants and refugees; lesbian, gay, bisexual, transgendered, and queer individuals; and those with disabilities. Later attention shifted to broader social justice challenges within a public health perspective, such as AIDS, obesity, and violence. Also included is a brief discussion of the Hoffman Report. The article ends with a discussion of future directions for the APA's efforts related to human rights and social justice related to health disparities, violent extremism, social inequality, migration, cultural and racial diversity, and an evidence-based approach to programming. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  16. The Mechanisms to Consolidate Staff Efforts in the Targeting of Increasing the Competitive Potential of Enterprise

    Directory of Open Access Journals (Sweden)

    Legominova Svitlana V.

    2017-10-01

    Full Text Available The topicality of focusing efforts to improve the competitive potential of enterprise through intellectualization of its staff, using continuous training in accordance with technological regimes and modern trends, has been rationalized. The author has analyzed the structural features of intellectual capital, determining the need for their efficient interaction to gain competitive value. A combination of behavioristic and cognitive approaches has been proposed, using a holistic model of human resources management in order to ensure efficient management and consideration of specific characteristics of cognitive behavior. It has been proven that the competitive potential of enterprise is directly dependent on the accumulation and diffusion of knowledge, should be of permanent nature, ensuring a stable increase in the competitive potential of enterprise and creating the ground for the formation of leadership positions, thus determining the basic mainstreams of development.

  17. Programming effort analysis of the ELLPACK language

    Science.gov (United States)

    Rice, J. R.

    1978-01-01

    ELLPACK is a problem statement language and system for elliptic partial differential equations which is implemented by a FORTRAN preprocessor. ELLPACK's principal purpose is as a tool for the performance evaluation of software. However, it is used here as an example with which to study the programming effort required for problem solving. It is obvious that problem statement languages can reduce programming effort tremendously; the goal is to quantify this somewhat. This is done by analyzing the lengths and effort (as measured by Halstead's software science technique) of various approaches to solving these problems.

  18. [Limit of therapeutic effort in Spanish medical journals].

    Science.gov (United States)

    Solís García Del Pozo, Julián; Gómez Pérez, Ignacio

    2012-01-01

    In this paper we review articles concerning the limits of therapeutic effort that have been published in the past decade in journals directed at health professionals. Most of these articles are opinion pieces in which the influence of principlism is clear, even going so far as to justify the right to terminate life based on patient autonomy. It is time for personalistic bioethics to transmit its approaches in medical journals that are not specialized in bioethics.

  19. Low-Power, Rad-hard Reconfigurable, Bi-directional Flexfet™ Level Shifter ReBiLS for Multiple Generation Technology Integration for Space Exploration, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The many different generations of integrated circuit (IC) technologies required for new space exploration systems demand designs operate at multiple and often...

  20. Technical assistance efforts at EG and G Idaho, Inc

    Energy Technology Data Exchange (ETDEWEB)

    Engen, I.A.; Toth, W.J.

    1981-01-01

    As part of DOE's geothermal outreach program, EG and G Idaho has been funded since 1977 to provide technical information and assistance to parties interested in the direct applications of geothermal energy. In this time information has been provided to over 1000 requestors and technical assistance and analyses have been supplied to over 250 parties interested in developing geothermal resources. Many of the latter efforts are leading to direct-use projects that use geothermal resources to replace fossil fuels. A few of the more promising projects are discussed.

  1. Technology development and applications at Fernald

    International Nuclear Information System (INIS)

    Pettit, P.J.; Skriba, M.C.; Warner, R.D.

    1995-01-01

    At the Fernald Environmental Management Project (FEMP) northwest of Cincinnati, Ohio, the U.S. Department of Energy and contractor Fernald Environmental Restoration Management Corporation (FERMCO) are aggressively pursuing both the development and the application of improved, innovative technology to the environmental restoration task. Application of emerging technologies is particularly challenging in a regulatory environment that places pressure on operational managers to develop and meet tight schedules. The regulatory and operational needs make close communication essential between technology developers and technology users (CERCLA/RCRA Unit managers). At Fernald this cooperation and communication has led, not only to the development and demonstration of new technologies with applications at other sites, but also to application of new technologies directly to the Fernald clean up. New technologies have been applied to improve environmental safety and health, improve the effectiveness of restoration efforts, and to cut restoration costs. The paper will describe successful efforts to develop and apply new technologies at the FEMP and will emphasize those technologies that have been applied and are planned for use in the clean up of this former uranium production facility

  2. Illinois highway materials sustainability efforts of 2015.

    Science.gov (United States)

    2016-08-01

    This report provides a summary of the sustainability efforts of the Illinois Department of Transportation (IDOT) in recycling : reclaimed materials in highway construction during calendar year 2015. This report meets the requirements of Illinois Publ...

  3. EU grid computing effort takes on malaria

    CERN Multimedia

    Lawrence, Stacy

    2006-01-01

    Malaria is the world's most common parasitic infection, affecting more thatn 500 million people annually and killing more than 1 million. In order to help combat malaria, CERN has launched a grid computing effort (1 page)

  4. Illinois highway materials sustainability efforts of 2014.

    Science.gov (United States)

    2015-08-01

    This report presents the 2014 sustainability efforts of the Illinois Department of Transportation (IDOT) in : recycling reclaimed materials in highway construction. This report meets the requirements of Illinois : Public Act 097-0314 by documenting I...

  5. Illinois highway materials sustainability efforts of 2016.

    Science.gov (United States)

    2017-07-04

    This report provides a summary of the sustainability efforts of the Illinois Department of Transportation (IDOT) in recycling : reclaimed materials in highway construction during calendar year 2016. This report meets the requirements of Illinois Publ...

  6. Illinois highway materials sustainability efforts of 2013.

    Science.gov (United States)

    2014-08-01

    This report presents the sustainability efforts of the Illinois Department of Transportation (IDOT) in : recycling and reclaiming materials for use in highway construction. This report meets the requirements of : Illinois Public Act 097-0314 by docum...

  7. Manufacturing technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

  8. Together in the same direction

    CERN Multimedia

    2013-01-01

    It’s sometimes difficult to explain the nature of global collaboration in particle physics: how fierce competition coexists with collaboration, and how, whatever our differences, we all pull in the same direction. But this week gave us two strong examples.   Firstly, on Wednesday, the Technical Design Report (TDR) for the International Linear Collider (ILC) was officially delivered to the International Committee for Future Accelerators, ICFA, the global body that oversees the development of major projects in particle physics. This event marks the culmination of years of effort through close global collaboration between labs around the world. It has seen tough collective decisions being taken between competing technologies, with all participating labs lining up behind the chosen option. And on Wednesday this week, it saw the linear collider community choosing CERN as one of the three venues for the official handover, despite the fact that CERN was not one of the original core labs ...

  9. Technology Transfer Report

    Science.gov (United States)

    2000-01-01

    Since its inception, Goddard has pursued a commitment to technology transfer and commercialization. For every space technology developed, Goddard strives to identify secondary applications. Goddard then provides the technologies, as well as NASA expertise and facilities, to U.S. companies, universities, and government agencies. These efforts are based in Goddard's Technology Commercialization Office. This report presents new technologies, commercialization success stories, and other Technology Commercialization Office activities in 1999.

  10. Living systematic reviews: 2. Combining human and machine effort.

    Science.gov (United States)

    Thomas, James; Noel-Storr, Anna; Marshall, Iain; Wallace, Byron; McDonald, Steven; Mavergames, Chris; Glasziou, Paul; Shemilt, Ian; Synnot, Anneliese; Turner, Tari; Elliott, Julian

    2017-11-01

    New approaches to evidence synthesis, which use human effort and machine automation in mutually reinforcing ways, can enhance the feasibility and sustainability of living systematic reviews. Human effort is a scarce and valuable resource, required when automation is impossible or undesirable, and includes contributions from online communities ("crowds") as well as more conventional contributions from review authors and information specialists. Automation can assist with some systematic review tasks, including searching, eligibility assessment, identification and retrieval of full-text reports, extraction of data, and risk of bias assessment. Workflows can be developed in which human effort and machine automation can each enable the other to operate in more effective and efficient ways, offering substantial enhancement to the productivity of systematic reviews. This paper describes and discusses the potential-and limitations-of new ways of undertaking specific tasks in living systematic reviews, identifying areas where these human/machine "technologies" are already in use, and where further research and development is needed. While the context is living systematic reviews, many of these enabling technologies apply equally to standard approaches to systematic reviewing. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  11. Innovation Efforts in Education and School Administration: Views of Turkish School Administrators

    Science.gov (United States)

    Akin, Ugur

    2016-01-01

    Problem Statement: In the current information era, nearly all organizations make efforts to make innovations in the fields of information, communication, technology, etc. Educational organizations are no exception to this trend. Moreover, it can be argued that educational institutions make a particular effort to rapidly keep pace with change. In…

  12. Canadian fusion fuels technology project

    International Nuclear Information System (INIS)

    1986-01-01

    The Canadian Fusion Fuels Technology Project was launched in 1982 to coordinate Canada's provision of fusion fuels technology to international fusion power development programs. The project has a mandate to extend and adapt existing Canadian tritium technologies for use in international fusion power development programs. 1985-86 represents the fourth year of the first five-year term of the Canadian Fusion Fuels Technology Project (CFFTP). This reporting period coincides with an increasing trend in global fusion R and D to direct more effort towards the management of tritium. This has resulted in an increased linking of CFFTP activities and objectives with those of facilities abroad. In this way there has been a continuing achievement resulting from CFFTP efforts to have cooperative R and D and service activities with organizations abroad. All of this is aided by the cooperative international atmosphere within the fusion community. This report summarizes our past year and provides some highlights of the upcoming year 1986/87, which is the final year of the first five-year phase of the program. AECL (representing the Federal Government), the Ministry of Energy (representing Ontario) and Ontario Hydro, have given formal indication of their intent to continue with a second five-year program. Plans for the second phase will continue to emphasize tritium technology and remote handling

  13. INTERACTIVE 3D SYSTEMS OF VIRTUAL REALITY AS ONE OF THE DIRECTIONS FOR EVOLUTION OF DISTANCE LEARNING TECHNOLOGIES IN HIGHER SCOOL

    Directory of Open Access Journals (Sweden)

    Д В Сенашенко

    2016-12-01

    Full Text Available The article describes history of 3D virtual interactive technology developing and gives story of it’s using for different business companies and universities. Statistical analysis of target audience is provided. Features of such systems are described. Particularly author mentions functionality and advantages of 3D-systmes as one of long-term distant learning technology during educational program realization and formulates arguments for introduction of this technology to distant education systems of Russian Higher school. Discusses usability of it for distance learning in high school.

  14. Technology transfer and the management of radioactive waste

    International Nuclear Information System (INIS)

    Bonne, A.; Chan-Sands, C.

    1998-01-01

    One of the IAEA's fundamental roles is to act as a centre for the transfer of nuclear technologies, including those for managing radioactive wastes. In the area of waste management technology, the Agency is actively working to improve and develop new and efficient means to fulfill that responsibility. Recognizing its responsibilities and challenges, IAEA efforts related to radioactive waste management technologies into the next century are framed around three major areas: the development and implementation of mechanisms for better technology transfer and information exchange; the promotion of sustainable and safer processes and procedures; and the provision of peer reviews and direct technical assistance that help facilitate bilateral and multinational efforts. To illustrate some specific elements of the overall programme, this article reviews selected technology-transfer activities that have been initiated in the field

  15. NASA Goddard Thermal Technology Overview 2018

    Science.gov (United States)

    Butler, Dan; Swanson, Ted

    2018-01-01

    This presentation summarizes the current plans and efforts at NASA/Goddard to develop new thermal control technology for anticipated future missions. It will also address some of the programmatic developments currently underway at NASA, especially with respect to the NASA Technology Development Program. The effects of the recently submitted NASA budget will also be addressed. While funding for basic technology development is still tight, significant efforts are being made in direct support of flight programs. Thermal technology Implementation on current flight programs will be reviewed, and the recent push for Cube-sat mission development will also be addressed. Many of these technologies also have broad applicability to DOD, DOE, and commercial programs. Partnerships have been developed with the Air Force, Navy, and various universities to promote technology development. In addition, technology development activities supported by internal research and development (IRAD) program and the Small Business Innovative Research (SBIR) program are reviewed in this presentation. Specific technologies addressed include; two-phase systems applications and issues on NASA missions, latest developments of thermal control coatings, Atomic Layer Deposition (ALD), Micro-scale Heat Transfer, and various other research activities.

  16. NASA Goddard Thermal Technology Overview 2017

    Science.gov (United States)

    Butler, Dan; Swanson, Ted

    2017-01-01

    This presentation summarizes the current plans and efforts at NASA Goddard to develop new thermal control technology for anticipated future missions. It will also address some of the programmatic developments currently underway at NASA, especially with respect to the NASA Technology Development Program. The effects of the recently enacted FY 17 NASA budget, which includes a sizeable increase, will also be addressed. While funding for basic technology development is still tight, significant efforts are being made in direct support of flight programs. Thermal technology Implementation on current flight programs will be reviewed, and the recent push for CubeSat mission development will also be addressed. Many of these technologies also have broad applicability to DOD (Dept. of Defense), DOE (Dept. of the Environment), and commercial programs. Partnerships have been developed with the Air Force, Navy, and various universities to promote technology development. In addition, technology development activities supported by internal research and development (IRAD) program and the Small Business Innovative Research (SBIR) program are reviewed in this presentation. Specific technologies addressed include; two-phase systems applications and issues on NASA missions, latest developments of electro-hydrodynamically pumped systems, Atomic Layer Deposition (ALD), Micro-scale Heat Transfer, and various other research activities.

  17. NASA Goddard Thermal Technology Overview 2016

    Science.gov (United States)

    Butler, Dan; Swanson, Ted

    2016-01-01

    This presentation summarizes the current plans and efforts at NASA Goddard to develop new thermal control technology for anticipated future missions. It will also address some of the programmatic developments currently underway at NASA, especially with respect to the NASA Technology Development Program. The effects of the recently enacted FY 16 NASA budget, which includes a sizeable increase, will also be addressed. While funding for basic technology development is still tight, significant efforts are being made in direct support of flight programs. Thermal technology implementation on current flight programs will be reviewed, and the recent push for Cube-sat mission development will also be addressed. Many of these technologies also have broad applicability to DOD, DOE, and commercial programs. Partnerships have been developed with the Air Force, Navy, and various universities to promote technology development. In addition, technology development activities supported by internal research and development (IRAD) program and the Small Business Innovative Research (SBIR) program are reviewed in this presentation. Specific technologies addressed include; two-phase systems applications and issues on NASA missions, latest developments of electro-hydrodynamically pumped systems, Atomic Layer Deposition (ALD), Micro-scale Heat Transfer, and various other research activities.

  18. Radiation Technology

    International Nuclear Information System (INIS)

    1990-01-01

    The conference was organized to evaluate the application directions of radiation technology in Vietnam and to utilize the Irradiation Centre in Hanoi with the Co-60 source of 110 kCi. The investigation and study of technico-economic feasibility for technology development to various items of food and non-food objects was reported. (N.H.A)

  19. Technology '90

    International Nuclear Information System (INIS)

    1991-01-01

    The US Department of Energy (DOE) laboratories have a long history of excellence in performing research and development in a number of areas, including the basic sciences, applied-energy technology, and weapons-related technology. Although technology transfer has always been an element of DOE and laboratory activities, it has received increasing emphasis in recent years as US industrial competitiveness has eroded and efforts have increased to better utilize the research and development resources the laboratories provide. This document, Technology '90, is the latest in a series that is intended to communicate some of the many opportunities available for US industry and universities to work with the DOE and its laboratories in the vital activity of improving technology transfer to meet national needs. Technology '90 is divided into three sections: Overview, Technologies, and Laboratories. The Overview section describes the activities and accomplishments of the DOE research and development program offices. The Technologies section provides descriptions of new technologies developed at the DOE laboratories. The Laboratories section presents information on the missions, programs, and facilities of each laboratory, along with a name and telephone number of a technology transfer contact for additional information. Separate papers were prepared for appropriate sections of this report

  20. Exoatmospheric intercepts using zero effort miss steering for midcourse guidance

    Science.gov (United States)

    Newman, Brett

    The suitability of proportional navigation, or an equivalent zero effort miss formulation, for exatmospheric intercepts during midcourse guidance, followed by a ballistic coast to the endgame, is addressed. The problem is formulated in terms of relative motion in a general, three dimensional framework. The proposed guidance law for the commanded thrust vector orientation consists of the sum of two terms: (1) along the line of sight unit direction and (2) along the zero effort miss component perpendicular to the line of sight and proportional to the miss itself and a guidance gain. If the guidance law is to be suitable for longer range targeting applications with significant ballistic coasting after burnout, determination of the zero effort miss must account for the different gravitational accelerations experienced by each vehicle. The proposed miss determination techniques employ approximations for the true differential gravity effect and thus, are less accurate than a direct numerical propagation of the governing equations, but more accurate than a baseline determination, which assumes equal accelerations for both vehicles. Approximations considered are constant, linear, quadratic, and linearized inverse square models. Theoretical results are applied to a numerical engagement scenario and the resulting performance is evaluated in terms of the miss distances determined from nonlinear simulation.

  1. A multilateral effort to develop DNA vaccines against falciparum malaria.

    Science.gov (United States)

    Kumar, Sanjai; Epstein, Judith E; Richie, Thomas L; Nkrumah, Francis K; Soisson, Lorraine; Carucci, Daniel J; Hoffman, Stephen L

    2002-03-01

    Scientists from several organizations worldwide are working together to develop a multistage, multigene DNA-based vaccine against Plasmodium falciparum malaria. This collaborative vaccine development effort is named Multi-Stage DNA-based Malaria Vaccine Operation. An advisory board of international experts in vaccinology, malariology and field trials provides the scientific oversight to support the operation. This article discusses the rationale for the approach, underlying concepts and the pre-clinical development process, and provides a brief outline of the plans for the clinical testing of a multistage, multiantigen malaria vaccine based on DNA plasmid immunization technology.

  2. ERP Effort Estimation Based on Expert Judgments

    NARCIS (Netherlands)

    Erasmus, I.P.; Daneva, Maia; Demirors, O.; Abran, A.

    2013-01-01

    A new technology shift brings to the ERP domain a change in the industry and a new platform build on in-memory optimized databases, introduced and known as SAP HANA [1]. This technology shift in the ERP domain led to SAP's ERP on HANA, the solution where the ERP suite is offered on the same platform

  3. Instruction Emphasizing Effort Improves Physics Problem Solving

    Science.gov (United States)

    Li, Daoquan

    2012-01-01

    Effectively using strategies to solve complex problems is an important educational goal and is implicated in successful academic performance. However, people often do not spontaneously use the effective strategies unless they are motivated to do so. The present study was designed to test whether educating students about the importance of effort in…

  4. Student Effort, Consistency, and Online Performance

    Science.gov (United States)

    Patron, Hilde; Lopez, Salvador

    2011-01-01

    This paper examines how student effort, consistency, motivation, and marginal learning, influence student grades in an online course. We use data from eleven Microeconomics courses taught online for a total of 212 students. Our findings show that consistency, or less time variation, is a statistically significant explanatory variable, whereas…

  5. Net benefits of wildfire prevention education efforts

    Science.gov (United States)

    Jeffrey P. Prestemon; David T. Butry; Karen L. Abt; Ronda Sutphen

    2010-01-01

    Wildfire prevention education efforts involve a variety of methods, including airing public service announcements, distributing brochures, and making presentations, which are intended to reduce the occurrence of certain kinds of wildfires. A Poisson model of preventable Florida wildfires from 2002 to 2007 by fire management region was developed. Controlling for...

  6. Has Malaysia's antidrug effort been effective?

    Science.gov (United States)

    Scorzelli, J F

    1992-01-01

    It is a common belief that a massive effort in law enforcement, preventive education and rehabilitation will result in the elimination of a country's drug problem. Based on this premise. Malaysia in 1983 implemented such a multifaceted anti-drug strategy, and the results of a 1987 study by the author suggested that Malaysia's effort had begun to contribute to a steady decrease in the number of identified drug abusers. Although the number of drug-addicted individuals declined, the country's recidivism rates were still high. Because of this high relapse rate, Malaysia expanded their rehabilitation effort and developed a community transition program. In order to determine the impact of these changes on the country's battle against drug abuse, a follow-up study was conducted in 1990. The results of this study did not clearly demonstrate that the Malaysian effort had been successful in eliminating the problem of drug abuse, and raised some questions concerning the effectiveness of the country's drug treatment programs.

  7. Phase transitions in least-effort communications

    International Nuclear Information System (INIS)

    Prokopenko, Mikhail; Ay, Nihat; Obst, Oliver; Polani, Daniel

    2010-01-01

    We critically examine a model that attempts to explain the emergence of power laws (e.g., Zipf's law) in human language. The model is based on the principle of least effort in communications—specifically, the overall effort is balanced between the speaker effort and listener effort, with some trade-off. It has been shown that an information-theoretic interpretation of this principle is sufficiently rich to explain the emergence of Zipf's law in the vicinity of the transition between referentially useless systems (one signal for all referable objects) and indexical reference systems (one signal per object). The phase transition is defined in the space of communication accuracy (information content) expressed in terms of the trade-off parameter. Our study explicitly solves the continuous optimization problem, subsuming a recent, more specific result obtained within a discrete space. The obtained results contrast Zipf's law found by heuristic search (that attained only local minima) in the vicinity of the transition between referentially useless systems and indexical reference systems, with an inverse-factorial (sub-logarithmic) law found at the transition that corresponds to global minima. The inverse-factorial law is observed to be the most representative frequency distribution among optimal solutions

  8. The Galileo Teacher Training Program Global Efforts

    Science.gov (United States)

    Doran, R.; Pennypacker, C.; Ferlet, R.

    2012-08-01

    The Galileo Teacher Training Program (GTTP) successfully named representatives in nearly 100 nations in 2009, the International Year of Astronomy (IYA2009). The challenge had just begun. The steps ahead are how to reach educators that might benefit from our program and how to help build a more fair and science literate society, a society in which good tools and resources for science education are not the privilege of a few. From 2010 on our efforts have been to strengthen the newly formed network and learn how to equally help educators and students around the globe. New partnerships with other strong programs and institutions are being formed, sponsorship schemes being outlined, new tools and resources being publicized, and on-site and video conference training conducted all over the world. Efforts to officially accredit a GTTP curriculum are on the march and a stronger certification process being outlined. New science topics are being integrated in our effort and we now seek to discuss the path ahead with experts in this field and the community of users, opening the network to all corners of our beautiful blue dot. The main aim of this article is to open the discussion regarding the urgent issue of how to reawaken student interest in science, how to solve the gender inequality in science careers, and how to reach the underprivileged students and open to them the same possibilities. Efforts are in strengthening the newly formed network and learning how to equally help educators and students around the globe.

  9. Effort - Final technical report on task 3

    DEFF Research Database (Denmark)

    Bay, Niels; Henningsen, Poul; Eriksen, Morten

    The present report is documentation for the work carried out at DTU on the Brite/Euram project No. BE96-3340, contract No. BRPR-CT97-0398, with the title Enhanced Framework for forging design using reliable three-dimensional simulation (EFFORTS). The objective of task 3 is to determine data...

  10. Workplace High Tech Spurs Retraining Efforts.

    Science.gov (United States)

    Davis, Dwight B.

    1984-01-01

    Discusses who should provide training for displaced workers who need new skills. Areas examined include: (1) the need for retraining; (2) current corporate efforts; (3) agreements in the automotive industry; (4) job quality; (5) the federal government's role; and (6) federal legislation related to the problem. (JN)

  11. Reasonable limits to radiation protection efforts

    International Nuclear Information System (INIS)

    Gonen, Y.G.

    1982-01-01

    It is shown that change in life expectancy (ΔLE) is an improved estimate for risks and safety efforts, reflecting the relevant social goal. A cost-effectiveness index, safety investment/ΔLE, is defined. The harm from low level radiation is seen as a reduction of life expectancy instead of an increased probability of contracting cancer. (author)

  12. Hydrogen technologies and the technology learning curve

    International Nuclear Information System (INIS)

    Rogner, H.-H.

    1998-01-01

    On their bumpy road to commercialization, hydrogen production, delivery and conversion technologies not only require dedicated research, development and demonstration efforts, but also protected niche markets and early adopters. While niche markets utilize the unique technological properties of hydrogen, adopters exhibit a willingness to pay a premium for hydrogen fueled energy services. The concept of the technology learning curve is applied to estimate the capital requirements associated with the commercialization process of several hydrogen technologies. (author)

  13. Mapping telemedicine efforts: surveying regional initiatives in Denmark.

    Science.gov (United States)

    Kierkegaard, Patrick

    2015-05-01

    The aim of this study is to survey telemedicine services currently in operation across Denmark. The study specifically seeks to answer the following questions: What initiatives are deployed within the different regions? What are the motivations behind the projects? What technologies are being utilized? What medical disciplines are being supported using telemedicine systems? All data were surveyed from the Telemedicinsk Landkort, a newly created database designed to provide a comprehensive and systematic overview of all telemedicine technologies in Denmark. The results of this study suggest that a growing numbers of telemedicine initiatives are currently in operation across Denmark but that considerable variations exist in terms of regional efforts as the number of operational telemedicine projects varied from region to region. The results of this study provide a timely picture of the factors that are shaping the telemedicine landscape of Denmark and suggest potential strategies to help policymakers increase and improve national telemedicine deployment.

  14. Gas utilization technologies

    International Nuclear Information System (INIS)

    Biljetina, R.

    1994-01-01

    One of the constant challenges facing the research community is the identification of technology needs 5 to 15 years from now. A look back into history indicates that the forces driving natural gas research have changed from decade to decade. In the 1970s research was driven by concerns for adequate supply; in the 1980s research was aimed at creating new markets for natural gas. What then are the driving forces for the 1990s? Recent reports from the natural gas industry have helped define a new direction driven primarily by market demand for natural gas. A study prepared by the Interstate Natural Gas Association of America Foundation entitled ''Survey of Natural Research, Development, and Demonstration RD ampersand D Priorities'' indicated that in the 1990s the highest research priority should be for natural gas utilization and that technology development efforts should not only address efficiency and cost, but environmental and regulatory issues as well. This study and others, such as the report by the American Gas Association (A.G.A.) entitled ''Strategic Vision for Natural Gas Through the Year 2000,'' clearly identify the market sectors driving today's technology development needs. The biggest driver is the power generation market followed by the industrial, transportation, appliance, and gas cooling markets. This is best illustrated by the GRI 1994 Baseline Projection on market growth in various sectors between the year 1992 and 2010. This paper highlights some of the recent technology developments in each one of these sectors

  15. Direct fast neutron detection: A status report

    International Nuclear Information System (INIS)

    Peurrung, A.J.; Hansen, R.R.; Craig, R.A.; Hensley, W.K.; Hubbard, C.W.; Keller, P.E.; Reeder, P.L.; Sunberg, D.S.

    1997-12-01

    This report describes the status of efforts to develop direct fast-neutron detection via proton recoil within plastic scintillator. Since recording proton recoil events is of little practical use without a means to discriminate effectively against gamma-ray interactions, the present effort is concentrated on demonstrating a method that distinguishes between pulse types. The proposed method exploits the different pulse shapes that are to be expected primarily on the basis of the slower speed of the recoiling fission neutrons. Should this effort ultimately prove successful, the resulting novel technology will have the potential to significantly lower cost and increase capability for a number of critical neutron-detection applications. Considerable progress has been made toward a clear and compelling demonstration of this new technique. An exhaustive theoretical and numerical investigation of the method has been completed. The authors have been able to better understand the laboratory results and estimate the performance that could ultimately be achieved using the proposed technique. They have assessed the performance of a number of different algorithms for discriminating between neutron and gamma ray events. The results of this assessment will be critical when the construction of low-cost, field-portable neutron detectors becomes necessary. Finally, a laboratory effort to realize effective discrimination is well underway and has resulted in partial success

  16. Obligatory Effort [Hishtadlut] as an Explanatory Model: A Critique of Reproductive Choice and Control.

    Science.gov (United States)

    Teman, Elly; Ivry, Tsipy; Goren, Heela

    2016-06-01

    Studies on reproductive technologies often examine women's reproductive lives in terms of choice and control. Drawing on 48 accounts of procreative experiences of religiously devout Jewish women in Israel and the US, we examine their attitudes, understandings and experiences of pregnancy, reproductive technologies and prenatal testing. We suggest that the concept of hishtadlut-"obligatory effort"-works as an explanatory model that organizes Haredi women's reproductive careers and their negotiations of reproductive technologies. As an elastic category with negotiable and dynamic boundaries, hishtadlut gives ultra-orthodox Jewish women room for effort without the assumption of control; it allows them to exercise discretion in relation to medical issues without framing their efforts in terms of individual choice. Haredi women hold themselves responsible for making their obligatory effort and not for pregnancy outcomes. We suggest that an alternative paradigm to autonomous choice and control emerges from cosmological orders where reproductive duties constitute "obligatory choices."

  17. Report to the Congressional Defense Committees: Status of the Department of Defense's Business Transformation Efforts

    National Research Council Canada - National Science Library

    2008-01-01

    ...). It directs the Secretary of Defense to provide the Congressional Defense Committees with an annual report on the Department's business transformation efforts and compliance with the requirements of the law...

  18. SARS and population health technology.

    Science.gov (United States)

    Eysenbach, Gunther

    2003-01-01

    The recent global outbreak of SARS (severe acute respiratory syndrome) provides an opportunity to study the use and impact of public health informatics and population health technology to detect and fight a global epidemic. Population health technology is the umbrella term for technology applications that have a population focus and the potential to improve public health. This includes the Internet, but also other technologies such as wireless devices, mobile phones, smart appliances, or smart homes. In the context of an outbreak or bioterrorism attack, such technologies may help to gather intelligence and detect diseases early, and communicate and exchange information electronically worldwide. Some of the technologies brought forward during the SARS epidemic may have been primarily motivated by marketing efforts, or were more directed towards reassuring people that "something is being done," ie, fighting an "epidemic of fear." To understand "fear epidemiology" is important because early warning systems monitoring data from a large number of people may not be able to discriminate between a biological epidemic and an epidemic of fear. The need for critical evaluation of all of these technologies is stressed.

  19. Collaborative Information Technologies

    Science.gov (United States)

    Meyer, William; Casper, Thomas

    1999-11-01

    Significant effort has been expended to provide infrastructure and to facilitate the remote collaborations within the fusion community and out. Through the Office of Fusion Energy Science Information Technology Initiative, communication technologies utilized by the fusion community are being improved. The initial thrust of the initiative has been collaborative seminars and meetings. Under the initiative 23 sites, both laboratory and university, were provided with hardware required to remotely view, or project, documents being presented. The hardware is capable of delivering documents to a web browser, or to compatible hardware, over ESNET in an access controlled manner. The ability also exists for documents to originate from virtually any of the collaborating sites. In addition, RealNetwork servers are being tested to provide audio and/or video, in a non-interactive environment with MBONE providing two-way interaction where needed. Additional effort is directed at remote distributed computing, file systems, security, and standard data storage and retrieval methods. This work supported by DoE contract No. W-7405-ENG-48

  20. Ozone pollution: rising concentrations despite French and EU efforts

    International Nuclear Information System (INIS)

    Ba, M.; Elichegaray, Ch.

    2003-11-01

    Ozone is the main indicator of photochemical pollution which is caused by a complex combination of primary pollutants formed by chemical reactions in the troposphere, in the presence of sunlight. These primary pollutants, otherwise known as precursors of ozone (nitrogen oxides, volatile organic compounds and carbon monoxide), are emitted both by natural sources and human activities. In urban areas, during the summer months, ozone is often the main cause of deterioration in air quality. Directive 2002/3/EC relating to ozone in ambient air entered into force on 9 September 2003, superseding the first ozone Directive (92/72/CE) of 21 September 1992. In the last 10 years, monitoring of ozone pollution has considerably progressed in France (the number of analysers has increased tenfold). Emissions of the ozone precursors fell significantly (-27%) between 1990 and 2000 in France as a result of combined efforts in all sectors of activity. However, between 1994 and 2002, ozone levels remained above the information threshold for the protection of human health and vegetation on average more than 100 days a year in rural areas and over 40 days a year in urban and peri-urban areas. Efforts undertaken both in France and other European countries aim to improve the situation and ensure compliance with the requirements of Directive 2002/3/EC. (author)

  1. Direct fuel cell product design improvement

    Energy Technology Data Exchange (ETDEWEB)

    Maru, H.C.; Farooque, M. [Energy Research Corp., Danbury, CT (United States)

    1996-12-31

    Significant milestones have been attained towards the technology development field testing and commercialization of direct fuel cell power plant since the 1994 Fuel Cell Seminar. Under a 5-year cooperative agreement with the Department of Energy signed in December 1994, Energy Research Corporation (ERC) has been developing the design for a MW-scale direct fuel cell power plant with input from previous technology efforts and the Santa Clara Demonstration Project. The effort encompasses product definition in consultation with the Fuel Cell Commercialization Group, potential customers, as well as extensive system design and packaging. Manufacturing process improvements, test facility construction, cell component scale up, performance and endurance improvements, stack engineering, and critical balance-of-plant development are also addressed. Major emphasis of this product design improvement project is on increased efficiency, compactness and cost reduction to establish a competitive place in the market. A 2.85 MW power plant with an efficiency of 58% and a footprint of 420 m{sup 2} has been designed. Component and subsystem testing is being conducted at various levels. Planning and preparation for verification of a full size prototype unit are in progress. This paper presents the results obtained since the last fuel cell seminar.

  2. JAEA's efforts for regional transparency in the area of nuclear nonproliferation

    International Nuclear Information System (INIS)

    Hoffheins, Barbara; Kawakubo, Yoko; Inoue, Naoko

    2014-03-01

    The Japan Atomic Energy Agency (JAEA) has undertaken a joint R and D project with the US Department of Energy's National Nuclear Security Administration (DOE/NNSA) for the purposes of developing an Information Sharing Framework (ISF) for regional nonproliferation cooperation since July 2011. This project builds on nearly twenty years of technical cooperation between JAEA, its predecessor organizations and the DOE including the activities to define, develop and test transparency technologies and other multilateral efforts. The objective of current project is to design a viable information sharing process to support the goals of building confidence in the peaceful nature of regional nuclear programs. At the end of a two-year-effort, project partners, JAEA and Sandia National Laboratories (SNL), have defined the comprehensive requirements for an ISF that will ensure nonproliferation transparency success and sustainability. In October 2011, a parallel project with the similar title and objective was launched under the arrangement between the US DOE/NNSA and the Republic of Korea Ministry of Education, Science and Technology (MEST). Since then, JAEA, SNL, the Korea Institute for Nuclear Nonproliferation and Control (KINAC) and Korea Atomic Energy Institute (KAERI) have jointly carried out the project in a form of informal, multilateral cooperation. The project partners have identified needs and audience for ISF, and initiated the discussion to develop requirements for ISF through workshops, meetings, regular telephone conferences, etc. The activities include conducting a survey to identify stakeholders' needs and requirements for an ISF, launching a website to practice information sharing concepts, and presenting papers. This paper provides the historical context of the current project to establish ISF, and reports the progress to date and speculates on future directions. (author)

  3. Separation science and technology: an ORNL perspective

    International Nuclear Information System (INIS)

    Pruett, D.J.

    1986-05-01

    This report was prepared as a summary of a fourfold effort: (1) to examine schemes for defining and categorizing the field of separation science and technology; (2) to review several of the major categories of separation techniques in order to determine the most recent developments and future research needs; (3) to consider selected problems and programs that require advances in separation science and technology as a part of their solution; and (4) to propose suggestions for new directions in separation research at Oak Ridge National Laboratory (ORNL)

  4. The Dow Chemical Company's synchrotron radiation effort - A case history

    International Nuclear Information System (INIS)

    Bubeck, R.A.; Bare, S.R.; DeKoven, B.M.; Heaney, M.D.; Rudolf, P.R.

    1994-01-01

    Synchrotron radiation is used in a broad array of technologies to study everything from molecular orientation at interfaces, through the structure of active catalyst phases. It is also a key to understanding structure-property relationships and providing fundamental information in polymers, ceramics, and other materials. The Dow Synchrotron User group, formed in 1991, has developed a long-term plan for effective utilization of synchrotron technology. The current efforts at Brookhaven National Lab. and Cornell High Energy Synchrotron Source are examined, as will the long-term commitment at the Advanced Photon Source. Current examples included are in-situ studies of polymer processing, surface and interfaces characterization, and real-time deformation studies. The APS is one of only three open-quotes Third Generationclose quotes synchrotron sources that are planned world-wide, the others being in France and Japan. With a scheduled completion date of mid-1995, the APS has remained both on-budget and ahead-of-schedule since ground-breaking in the spring of 1990. The DuPont - Northwestern University - Dow Collaborative Access Team (DND-CAT) is the first CAT to successfully pass all the necessary hurdles before beamline construction can begin. Some of the goals of the DND-CAT program are mentioned, together with the strengths of this unique collaborative effort

  5. Student Effort, Consistency and Online Performance

    Directory of Open Access Journals (Sweden)

    Hilde Patron

    2011-07-01

    Full Text Available This paper examines how student effort, consistency, motivation, and marginal learning, influence student grades in an online course. We use data from eleven Microeconomics courses taught online for a total of 212 students. Our findings show that consistency, or less time variation, is a statistically significant explanatory variable, whereas effort, or total minutes spent online, is not. Other independent variables include GPA and the difference between a pre-test and a post-test. The GPA is used as a measure of motivation, and the difference between a post-test and pre-test as marginal learning. As expected, the level of motivation is found statistically significant at a 99% confidence level, and marginal learning is also significant at a 95% level.

  6. Non-proliferation efforts in South Asia

    International Nuclear Information System (INIS)

    Chellaney, B.

    1994-01-01

    Southern Asia is one of the most volatile regions in the world because of inter-State and intra-State conflicts. Security in the region highly depends on the rival capabilities of the involved states, Pakistan, India, China. Increased Confidence building and nuclear transparency are becoming more significant issues in attaining stability in the region, although non-proliferation efforts in this region have attained little headway

  7. Some recent efforts toward high density implosions

    International Nuclear Information System (INIS)

    McClellan, G.E.

    1980-01-01

    Some recent Livermore efforts towards achieving high-density implosions are presented. The implosion dynamics necessary to compress DT fuel to 10 to 100 times liquid density are discussed. Methods of diagnosing the maximum DT density for a specific design are presented along with results to date. The dynamics of the double-shelled target with an exploding outer shell are described, and some preliminary experimental results are presented

  8. Evaluative language, cognitive effort and attitude change.

    OpenAIRE

    van der Pligt, J.; van Schie, E.C.M.; Martijn, C.

    1994-01-01

    Tested the hypotheses that evaluatively biased language influences attitudes and that the magnitude and persistence of attitude change depends on the amount of cognitive effort. 132 undergraduates participated in the experiment, which used material focusing on the issue of restricting adolescent driving over the weekends to reduce the number of fatal traffic accidents. Results indicate that evaluatively biased language can affect attitudes. Using words that evaluate the pro-position positivel...

  9. Efforts to identify spore forming bacillus

    Energy Technology Data Exchange (ETDEWEB)

    Zuleiha, M.S.; Hilmy, N. (National Atomic Energy Agency, Jakarta (Indonesia). Pasar Djumat Research Centre)

    1982-04-01

    Efforts to identify 47 species of radioresistant spore forming bacillus sp. isolated from locally produced medical devices have been carried out. The identifications was conducted using 19 kinds of biochemical tests and compared to species to bacillus subtilis W. T.; bacillus pumilus E 601 and bacillus sphaericus Csub(I)A. The results showed that bacillus sp. examined could be divided into 6 groups, i.e. bacillus cereus; bacillus subtilis; bacillus stearothermophylus; bacillus coagulans; bacillus sphaericus and bacillus circulans.

  10. Efforts to identify spore forming bacillus

    International Nuclear Information System (INIS)

    Zuleiha, M.S.; Hilmy, Nazly

    1982-01-01

    Efforts to identify 47 species of radioresistant spore forming bacillus sp. isolated from locally produced medical devices have been carried out. The identifications was conducted using 19 kinds of biochemical tests and compared to species to bacillus subtilis W. T.; bacillus pumilus E 601 and bacillus sphaericus Csub(I)A. The results showed that bacillus sp. examined could be divided into 6 groups, i.e. bacillus cereus; bacillus subtilis; bacillus stearothermophylus; bacillus coagulans; bacillus sphaericus and bacillus circulans. (author)

  11. Environmental Determinants of Lexical Processing Effort

    OpenAIRE

    McDonald, Scott

    2000-01-01

    Institute for Adaptive and Neural Computation A central concern of psycholinguistic research is explaining the relative ease or difficulty involved in processing words. In this thesis, we explore the connection between lexical processing effort and measurable properties of the linguistic environment. Distributional information (information about a word’s contexts of use) is easily extracted from large language corpora in the form of co-occurrence statistics. We claim that su...

  12. Joint Small Arms Technology Development Strategy for Joint Service Small Arms Science and Technology Investments

    Science.gov (United States)

    2016-01-26

    reduction efforts that need to be led by the Joint Services include One Way Luminescence, where the improvement in hit goes up for the follow on shots...new technology would enable spectral segment defeat, ranging from ultraviolet ( UV ), visible, Infrared (IR), radar, and radio and any combinations...program of work as directed via the Land Armaments Management Plan ( LAMP ) and advise the NAAG on systems and equipment aspects of dismounted operations

  13. Report Summarizing the Effort Required to Initiate Welding of Irradiated Materials within the Welding Cubicle

    Energy Technology Data Exchange (ETDEWEB)

    Frederick, Greg [Electric Power Research Institute (EPRI), Palo Alto, CA (United States); Sutton, Benjamin J. [Electric Power Research Institute (EPRI), Palo Alto, CA (United States); Tatman, Jonathan K. [Electric Power Research Institute (EPRI), Palo Alto, CA (United States); Vance, Mark Christopher [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Smith, Allen W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Clark, Scarlett R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Feng, Zhili [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Miller, Roger G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chen, Jian [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Tang, Wei [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hu, Xunxiang [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gibson, Brian T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-06-01

    The advanced welding facility within a hot cell at the Radiochemical Engineering Development Center of Oak Ridge National Laboratory (ORNL), which has been jointly funded by the U.S. Department of Energy (DOE), Office of Nuclear Energy, Light Water Reactor Sustainability Program and the Electric Power Research Institute, Long Term Operations Program and the Welding and Repair Technology Center, is in the final phase of development. Research and development activities in this facility will involve direct testing of advanced welding technologies on irradiated materials in order to address the primary technical challenge of helium induced cracking that can arise when conventional fusion welding techniques are utilized on neutron irradiated stainless steels and nickel-base alloys. This report details the effort that has been required since the beginning of fiscal year 2017 to initiate welding research and development activities on irradiated materials within the hot cell cubicle, which houses welding sub-systems that include laser beam welding (LBW) and friction stir welding (FSW) and provides material containment within the hot cell.

  14. Dopamine, Effort-Based Choice, and Behavioral Economics: Basic and Translational Research.

    Science.gov (United States)

    Salamone, John D; Correa, Merce; Yang, Jen-Hau; Rotolo, Renee; Presby, Rose

    2018-01-01

    Operant behavior is not only regulated by factors related to the quality or quantity of reinforcement, but also by the work requirements inherent in performing instrumental actions. Moreover, organisms often make effort-related decisions involving economic choices such as cost/benefit analyses. Effort-based decision making is studied using behavioral procedures that offer choices between high-effort options leading to relatively preferred reinforcers vs. low effort/low reward choices. Several neural systems, including the mesolimbic dopamine (DA) system and other brain circuits, are involved in regulating effort-related aspects of motivation. Considerable evidence indicates that mesolimbic DA transmission exerts a bi-directional control over exertion of effort on instrumental behavior tasks. Interference with DA transmission produces a low-effort bias in animals tested on effort-based choice tasks, while increasing DA transmission with drugs such as DA transport blockers tends to enhance selection of high-effort options. The results from these pharmacology studies are corroborated by the findings from recent articles using optogenetic, chemogenetic and physiological techniques. In addition to providing important information about the neural regulation of motivated behavior, effort-based choice tasks are useful for developing animal models of some of the motivational symptoms that are seen in people with various psychiatric and neurological disorders (e.g., depression, schizophrenia, Parkinson's disease). Studies of effort-based decision making may ultimately contribute to the development of novel drug treatments for motivational dysfunction.

  15. Dopamine, Effort-Based Choice, and Behavioral Economics: Basic and Translational Research

    Directory of Open Access Journals (Sweden)

    John D. Salamone

    2018-03-01

    Full Text Available Operant behavior is not only regulated by factors related to the quality or quantity of reinforcement, but also by the work requirements inherent in performing instrumental actions. Moreover, organisms often make effort-related decisions involving economic choices such as cost/benefit analyses. Effort-based decision making is studied using behavioral procedures that offer choices between high-effort options leading to relatively preferred reinforcers vs. low effort/low reward choices. Several neural systems, including the mesolimbic dopamine (DA system and other brain circuits, are involved in regulating effort-related aspects of motivation. Considerable evidence indicates that mesolimbic DA transmission exerts a bi-directional control over exertion of effort on instrumental behavior tasks. Interference with DA transmission produces a low-effort bias in animals tested on effort-based choice tasks, while increasing DA transmission with drugs such as DA transport blockers tends to enhance selection of high-effort options. The results from these pharmacology studies are corroborated by the findings from recent articles using optogenetic, chemogenetic and physiological techniques. In addition to providing important information about the neural regulation of motivated behavior, effort-based choice tasks are useful for developing animal models of some of the motivational symptoms that are seen in people with various psychiatric and neurological disorders (e.g., depression, schizophrenia, Parkinson’s disease. Studies of effort-based decision making may ultimately contribute to the development of novel drug treatments for motivational dysfunction.

  16. Rapid, simple and direct detection of Meloidogyne hapla from infected root galls using loop-mediated isothermal amplification combined with FTA technology

    OpenAIRE

    Peng, Huan; Long, Haibo; Huang, Wenkun; Liu, Jing; Cui, Jiangkuan; Kong, Lingan; Hu, Xianqi; Gu, Jianfeng; Peng, Deliang

    2017-01-01

    The northern root-knot nematode (Meloidogyne hapla) is a damaging nematode that has caused serious economic losses worldwide. In the present study, a sensitive, simple and rapid method was developed for detection of M. hapla in infested plant roots by combining a Flinders Technology Associates (FTA) card with loop-mediated isothermal amplification (LAMP). The specific primers of LAMP were designed based on the distinction of internal transcribed spacer (ITS) sequences between M. hapla and oth...

  17. Rapid, simple and direct detection of Meloidogyne hapla from infected root galls using loop-mediated isothermal amplification combined with FTA technology.

    Science.gov (United States)

    Peng, Huan; Long, Haibo; Huang, Wenkun; Liu, Jing; Cui, Jiangkuan; Kong, Lingan; Hu, Xianqi; Gu, Jianfeng; Peng, Deliang

    2017-04-03

    The northern root-knot nematode (Meloidogyne hapla) is a damaging nematode that has caused serious economic losses worldwide. In the present study, a sensitive, simple and rapid method was developed for detection of M. hapla in infested plant roots by combining a Flinders Technology Associates (FTA) card with loop-mediated isothermal amplification (LAMP). The specific primers of LAMP were designed based on the distinction of internal transcribed spacer (ITS) sequences between M. hapla and other Meloidogyne spp. The LAMP assay can detect nematode genomic DNA at concentrations low to 1/200 000, which is 100 times more sensitive than conventional PCR. The LAMP was able to highly specifically distinguish M. hapla from other closely related nematode species. Furthermore, the advantages of the FTA-LAMP assay to detect M. hapla were demonstrated by assaying infected root galls that were artificially inoculated. In addition, M. hapla was successfully detected from six of forty-two field samples using FTA-LAMP technology. This study was the first to provide a simple diagnostic assay for M. hapla using the LAMP assay combined with FTA technology. In conclusion, the new FTA-LAMP assay has the potential for diagnosing infestation in the field and managing the pathogen M. hapla.

  18. Quantifying the direct and indirect rebound effects for consumers as a response to energy-saving technologies in the EU-27

    NARCIS (Netherlands)

    Hu, J.; Poliakov, E.V.

    2015-01-01

    We estimate the rebound effect for residential space heating at the EU-27 level, which occurs when an improvement in energy efficiency results in additional energy consumption. Three types of rebound effects are distinguished, namely the direct effect, indirect effect and the embodied energy. We

  19. Decision support software technology demonstration plan

    Energy Technology Data Exchange (ETDEWEB)

    SULLIVAN,T.; ARMSTRONG,A.

    1998-09-01

    The performance evaluation of innovative and alternative environmental technologies is an integral part of the US Environmental Protection Agency's (EPA) mission. Early efforts focused on evaluating technologies that supported the implementation of the Clean Air and Clean Water Acts. In 1986 the Agency began to demonstrate and evaluate the cost and performance of remediation and monitoring technologies under the Superfund Innovative Technology Evaluation (SITE) program (in response to the mandate in the Superfund Amendments and Reauthorization Act of 1986 (SARA)). In 1990, the US Technology Policy was announced. This policy placed a renewed emphasis on making the best use of technology in achieving the national goals of improved quality of life for all Americans, continued economic growth, and national security. In the spirit of the technology policy, the Agency began to direct a portion of its resources toward the promotion, recognition, acceptance, and use of US-developed innovative environmental technologies both domestically and abroad. Decision Support Software (DSS) packages integrate environmental data and simulation models into a framework for making site characterization, monitoring, and cleanup decisions. To limit the scope which will be addressed in this demonstration, three endpoints have been selected for evaluation: Visualization; Sample Optimization; and Cost/Benefit Analysis. Five topics are covered in this report: the objectives of the demonstration; the elements of the demonstration plan; an overview of the Site Characterization and Monitoring Technology Pilot; an overview of the technology verification process; and the purpose of this demonstration plan.

  20. Spacecraft intercept guidance using zero effort miss steering

    Science.gov (United States)

    Newman, Brett

    The suitability of proportional navigation, or an equivalent zero effort miss formulation, for spacecraft intercepts during midcourse guidance, followed by a ballistic coast to the endgame, is addressed. The problem is formulated in terms of relative motion in a general 3D framework. The proposed guidance law for the commanded thrust vector orientation consists of the sum of two terms: (1) along the line of sight unit direction and (2) along the zero effort miss component perpendicular to the line of sight and proportional to the miss itself and a guidance gain. If the guidance law is to be suitable for longer range targeting applications with significant ballistic coasting after burnout, determination of the zero effort miss must account for the different gravitational accelerations experienced by each vehicle. The proposed miss determination techniques employ approximations for the true differential gravity effect. Theoretical results are applied to a numerical engagement scenario and the resulting performance is evaluated in terms of the miss distances determined from nonlinear simulation.

  1. New Mexico district work-effort analysis computer program

    Science.gov (United States)

    Hiss, W.L.; Trantolo, A.P.; Sparks, J.L.

    1972-01-01

    The computer program (CAN 2) described in this report is one of several related programs used in the New Mexico District cost-analysis system. The work-effort information used in these programs is accumulated and entered to the nearest hour on forms completed by each employee. Tabulating cards are punched directly from these forms after visual examinations for errors are made. Reports containing detailed work-effort data itemized by employee within each project and account and by account and project for each employee are prepared for both current-month and year-to-date periods by the CAN 2 computer program. An option allowing preparation of reports for a specified 3-month period is provided. The total number of hours worked on each account and project and a grand total of hours worked in the New Mexico District is computed and presented in a summary report for each period. Work effort not chargeable directly to individual projects or accounts is considered as overhead and can be apportioned to the individual accounts and projects on the basis of the ratio of the total hours of work effort for the individual accounts or projects to the total New Mexico District work effort at the option of the user. The hours of work performed by a particular section, such as General Investigations or Surface Water, are prorated and charged to the projects or accounts within the particular section. A number of surveillance or buffer accounts are employed to account for the hours worked on special events or on those parts of large projects or accounts that require a more detailed analysis. Any part of the New Mexico District operation can be separated and analyzed in detail by establishing an appropriate buffer account. With the exception of statements associated with word size, the computer program is written in FORTRAN IV in a relatively low and standard language level to facilitate its use on different digital computers. The program has been run only on a Control Data Corporation

  2. Engineered Nanostructured MEA Technology for Low Temperature Fuel Cells

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Yimin

    2009-07-16

    The objective of this project is to develop a novel catalyst support technology based on unique engineered nanostructures for low temperature fuel cells which: (1) Achieves high catalyst activity and performance; (2) Improves catalyst durability over current technologies; and (3) Reduces catalyst cost. This project is directed at the development of durable catalysts supported by novel support that improves the catalyst utilization and hence reduce the catalyst loading. This project will develop a solid fundamental knowledge base necessary for the synthetic effort while at the same time demonstrating the catalyst advantages in Direct Methanol Fuel Cells (DMFCs).

  3. Primary Care DirectConnect: How the Marriage of Call Center Technology and the EMR Brought Dramatic Results—A Service Quality Improvement Study

    Science.gov (United States)

    Bowman, Brent; Smith, Scott

    2010-01-01

    Of the key Health Plan patient satisfaction measures used in Kaiser Permanente Colorado, ease of contacting the physician's office with a medical question was consistently rated as the lowest quarterly patient satisfaction measure. Furthermore, medical office staff had become dissatisfied with their inability to contact patients who had previously left messages. In addition to the shear volume of messages, the return calls were often unanswered, leading to subsequent attempts to reach patients, creating additional work for medical office staff. DirectConnect—the project name for a system and set of processes focused on improving patient satisfaction with the ability to contact Primary Care delivery teams by telephone—focuses on isolating medical advice calls from the other types of calls handled by the centralized Call Center. The system identifies the patient using his/her unique electronic medical record number, then automatically routes medical advice calls directly to the appropriate Primary Care Physician (PCP) or staff. The clinician may then evaluate and respond to the patient's need quickly, thus managing more of their panel's requests in real time. How is DirectConnect different from simply having the patient contact their PCP's office directly? The primary difference is “one-number” convenience that allows all patients to dial one number to access their PCP's team. In addition, calls are routed to various staff as available to reduce long telephone queues and wait times. The DirectConnect system has resulted in statistically significant improvement in key service quality measures. Patient satisfaction improved from a pre-implementation nine quarter mean of 55.9% to a post-implementation 12 quarter mean of 70.2%. Fourteen percent to 17% of all Primary Care calls are now handled by the patient's home medical office team, creating a 54% improvement in the centralized Call Center's speed of answering calls in the first quarter post implementation

  4. Translating Gene Transfer: A Stalled Effort

    OpenAIRE

    Greenberg, Alexandra J.; McCormick, Jennifer; Tapia, Carmen J.; Windebank, Anthony J.

    2011-01-01

    The journey of gene transfer from laboratory to clinic has been slow and fraught with many challenges and barriers. Despite the development of the initial technology in the early 1970s, a standard clinical treatment involving “gene therapy” remains to be seen. Furthermore, much was written about the technology in the early 1990s, but since then, not much has been written about the journey of gene transfer. The translational path of gene transfer thus far, both pitfalls and successes, can serv...

  5. Economic growth, biodiversity loss and conservation effort.

    Science.gov (United States)

    Dietz, Simon; Adger, W Neil

    2003-05-01

    This paper investigates the relationship between economic growth, biodiversity loss and efforts to conserve biodiversity using a combination of panel and cross section data. If economic growth is a cause of biodiversity loss through habitat transformation and other means, then we would expect an inverse relationship. But if higher levels of income are associated with increasing real demand for biodiversity conservation, then investment to protect remaining diversity should grow and the rate of biodiversity loss should slow with growth. Initially, economic growth and biodiversity loss are examined within the framework of the environmental Kuznets hypothesis. Biodiversity is represented by predicted species richness, generated for tropical terrestrial biodiversity using a species-area relationship. The environmental Kuznets hypothesis is investigated with reference to comparison of fixed and random effects models to allow the relationship to vary for each country. It is concluded that an environmental Kuznets curve between income and rates of loss of habitat and species does not exist in this case. The role of conservation effort in addressing environmental problems is examined through state protection of land and the regulation of trade in endangered species, two important means of biodiversity conservation. This analysis shows that the extent of government environmental policy increases with economic development. We argue that, although the data are problematic, the implications of these models is that conservation effort can only ever result in a partial deceleration of biodiversity decline partly because protected areas serve multiple functions and are not necessarily designated to protect biodiversity. Nevertheless institutional and policy response components of the income biodiversity relationship are important but are not well captured through cross-country regression analysis.

  6. Technology Catalogue

    International Nuclear Information System (INIS)

    1994-02-01

    The Department of Energy's Office of Environmental Restoration and Waste Management (EM) is responsible for remediating its contaminated sites and managing its waste inventory in a safe and efficient manner. EM's Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste management programs within EM's Office of Environmental Restoration and Office of Waste Management. The purpose of the Technology Catalogue is to provide performance data on OTD-developed technologies to scientists and engineers assessing and recommending technical solutions within the Department's clean-up and waste management programs, as well as to industry, other federal and state agencies, and the academic community. OTD's applied research and demonstration activities are conducted in programs referred to as Integrated Demonstrations (IDs) and Integrated Programs (IPs). The IDs test and evaluate.systems, consisting of coupled technologies, at specific sites to address generic problems, such as the sensing, treatment, and disposal of buried waste containers. The IPs support applied research activities in specific applications areas, such as in situ remediation, efficient separations processes, and site characterization. The Technology Catalogue is a means for communicating the status. of the development of these innovative technologies. The FY93 Technology Catalogue features technologies successfully demonstrated in the field through IDs and sufficiently mature to be used in the near-term. Technologies from the following IDs are featured in the FY93 Technology Catalogue: Buried Waste ID (Idaho National Engineering Laboratory, Idaho); Mixed Waste Landfill ID (Sandia National Laboratories, New Mexico); Underground Storage Tank ID (Hanford, Washington); Volatile organic compound (VOC) Arid ID (Richland, Washington); and VOC Non-Arid ID (Savannah River Site, South Carolina)

  7. Effect of social influence on effort-allocation for monetary rewards.

    Science.gov (United States)

    Gilman, Jodi M; Treadway, Michael T; Curran, Max T; Calderon, Vanessa; Evins, A Eden

    2015-01-01

    Though decades of research have shown that people are highly influenced by peers, few studies have directly assessed how the value of social conformity is weighed against other types of costs and benefits. Using an effort-based decision-making paradigm with a novel social influence manipulation, we measured how social influence affected individuals' decisions to allocate effort for monetary rewards during trials with either high or low probability of receiving a reward. We found that information about the effort-allocation of peers modulated participant choices, specifically during conditions of low probability of obtaining a reward. This suggests that peer influence affects effort-based choices to obtain rewards especially under conditions of risk. This study provides evidence that people value social conformity in addition to other costs and benefits when allocating effort, and suggests that neuroeconomic studies that assess trade-offs between effort and reward should consider social environment as a factor that can influence decision-making.

  8. Educational Outreach Efforts at the NNDC

    International Nuclear Information System (INIS)

    Holden, N.E.

    2014-01-01

    Isotopes and nuclides are important in our everyday life. The general public and most students are never exposed to the concepts of stable and radioactive isotopes/nuclides. The National Nuclear Data Center (NNDC) is involved in an international project to develop a Periodic Table of the Isotopes for the educational community to illustrate the importance of isotopes and nuclides in understanding the world around us. This effort should aid teachers in introducing these concepts to students from the high school to the graduate school level

  9. Multipartite Entanglement Detection with Minimal Effort

    Science.gov (United States)

    Knips, Lukas; Schwemmer, Christian; Klein, Nico; Wieśniak, Marcin; Weinfurter, Harald

    2016-11-01

    Certifying entanglement of a multipartite state is generally considered a demanding task. Since an N qubit state is parametrized by 4N-1 real numbers, one might naively expect that the measurement effort of generic entanglement detection also scales exponentially with N . Here, we introduce a general scheme to construct efficient witnesses requiring a constant number of measurements independent of the number of qubits for states like, e.g., Greenberger-Horne-Zeilinger states, cluster states, and Dicke states. For four qubits, we apply this novel method to experimental realizations of the aforementioned states and prove genuine four-partite entanglement with two measurement settings only.

  10. Medial Orbitofrontal Cortex Mediates Effort-related Responding in Rats.

    Science.gov (United States)

    Münster, Alexandra; Hauber, Wolfgang

    2017-11-17

    The medial orbitofrontal cortex (mOFC) is known to support flexible control of goal-directed behavior. However, limited evidence suggests that the mOFC also mediates the ability of organisms to work with vigor towards a selected goal, a hypothesis that received little consideration to date. Here we show that excitotoxic mOFC lesion increased responding under a progressive ratio (PR) schedule of reinforcement, that is, the highest ratio achieved, and increased the preference for the high effort-high reward option in an effort-related decision-making task, but left intact outcome-selective Pavlovian-instrumental transfer and outcome-specific devaluation. Moreover, pharmacological inhibition of the mOFC increased, while pharmacological stimulation reduced PR responding. In addition, pharmacological mOFC stimulation attenuated methylphenidate-induced increase of PR responding. Intact rats tested for PR responding displayed higher numbers of c-Fos positive mOFC neurons than appropriate controls; however, mOFC neurons projecting to the nucleus accumbens did not show a selective increase in neuronal activation implying that they may not play a major role in regulating PR responding. Collectively, these results suggest that the mOFC plays a major role in mediating effort-related motivational functions. Moreover, our data demonstrate for the first time that the mOFC modulates effort-related effects of psychostimulant drugs. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  11. Soil washing technology evaluation

    International Nuclear Information System (INIS)

    Suer, A.

    1995-04-01

    Environmental Restoration Engineering (ERE) continues to review innovative, efficient, and cost effective technologies for SRS soil and/or groundwater remediation. As part of this effort, this technical evaluation provides review and the latest information on the technology for SRS soil remediation. Additional technology evaluation reports will be issued periodically to update these reports. The purpose of this report is to review the soil washing technology and its potential application to SRS soil remediation. To assess whether the Soil Washing technology is a viable option for SRS soil remediation, it is necessary to review the technology/process, technology advantages/limitations, performance, applications, and cost analysis

  12. Overcoming regulatory barriers: DOE environmental technology development program

    International Nuclear Information System (INIS)

    Kurtyka, B.M.; Clodfelter-Schumack, K.; Evans, T.T.

    1995-01-01

    The potential to improve environmental conditions via compliance or restoration is directly related to the ability to produce and apply innovative technological solutions. However, numerous organizations, including the US General Accounting Office (GAO), the EPA National Advisory Council for Environmental Policy and Technology (NACEPT), the DOE Environmental Management Advisory Board (EMAB), and the National Science and Technology Council (NSTC) have determined that significant regulatory barriers exist that inhibit the development and application of these technologies. They have noted the need for improved efforts in identifying and rectifying these barriers for the purpose of improving the technology development process, providing innovative alternatives, and enhancing the likelihood of technology acceptance by all. These barriers include, among others, regulator and user bias against ''unknown/unproven'' technologies; multi-level/multi-media permit disincentives; potential liability of developers and users for failed implementation; wrongly defined or inadequate data quality objectives: and lack of customer understanding and input. The ultimate goal of technology development is the utilization of technologies. This paper will present information on a number of regulatory barriers hindering DOE's environmental technology development program and describe DOE efforts to address these barriers

  13. Expendable launch vehicles technology: A report to the US Senate and the US House of Representatives

    Science.gov (United States)

    1990-01-01

    As directed in Public Law 100-657, Commercial Space Launch Act Amendments of 1988, and consistent with National Space Policy, NASA has prepared a report on a potential program of research on technologies to reduce the initial and recurring costs, increase reliability, and improve performance of expendable launch vehicles for the launch of commercial and government spacecraft into orbit. The report was developed in consultation with industry and in recognition of relevant ongoing and planned NASA and DoD technology programs which will provide much of the required launch systems technology for U.S. Government needs. Additional efforts which could be undertaken to strengthen the technology base are identified. To this end, focus is on needs for launch vehicle technology development and, in selected areas, includes verification to permit private-sector new technology application at reduced risk. If such a program were to be implemented, it would entail both government and private-sector effort and resources. The additional efforts identified would augment the existing launch vehicle technology programs. The additional efforts identified have not been funded, based upon agency assessments of relative priority vis-a-vis the existing programs. Throughout the consultation and review process, the industry representatives stressed the overriding importance of continuing the DoD/NASA Advanced Launch Development activity and other government technology programs as a primary source of essential launch vehicle technology.

  14. Expendable launch vehicles technology: A report to the US Senate and the US House of Representatives

    Science.gov (United States)

    1990-07-01

    As directed in Public Law 100-657, Commercial Space Launch Act Amendments of 1988, and consistent with National Space Policy, NASA has prepared a report on a potential program of research on technologies to reduce the initial and recurring costs, increase reliability, and improve performance of expendable launch vehicles for the launch of commercial and government spacecraft into orbit. The report was developed in consultation with industry and in recognition of relevant ongoing and planned NASA and DoD technology programs which will provide much of the required launch systems technology for U.S. Government needs. Additional efforts which could be undertaken to strengthen the technology base are identified. To this end, focus is on needs for launch vehicle technology development and, in selected areas, includes verification to permit private-sector new technology application at reduced risk. If such a program were to be implemented, it would entail both government and private-sector effort and resources. The additional efforts identified would augment the existing launch vehicle technology programs. The additional efforts identified have not been funded, based upon agency assessments of relative priority vis-a-vis the existing programs. Throughout the consultation and review process, the industry representatives stressed the overriding importance of continuing the DoD/NASA Advanced Launch Development activity and other government technology programs as a primary source of essential launch vehicle technology.

  15. School-Based Efforts to Prevent Cyberbullying

    Science.gov (United States)

    Patchin, Justin W.; Hinduja, Sameer

    2012-01-01

    While bullying historically has occurred within or in close proximity to the school, advances in communication technologies have allowed would-be bullies to extend their reach. Cyberbullying--as it is termed--has become a significant concern among adolescents and adults alike. As a result, parents, school professionals, law enforcement, and youth…

  16. Improvisation during Process-Technology Adoption

    DEFF Research Database (Denmark)

    Tjørnehøj, Gitte; Mathiassen, Lars

    2010-01-01

    SPI technology adoption and events that causes the process to drift in unpredictable directions. To further understand how management's attempt to control the process is complemented by drifting, this article investigates the role of improvisation in adoption of SPI technology in a Danish software......Most software firms struggle to take advantage of the potential benefits of software process improvement (SPI) as they adopt this technology into the complex and dynamic realities of their day-to-day operation. Such efforts are therefore typically fluctuating between management's attempt to control...... firm, SmallSoft, over a 10-year period (1996–2005). We found that micro-level and macro-level improvisations interacted, often in uncoordinated ways, to shape SPI technology adoption at SmallSoft. The improvisations enhanced employee creativity, motivation and empowerment, created momentum...

  17. Technological transfer. 1. Appropriateness for developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Berrie, T W

    1978-12-01

    Capital-intensive projects dominate the technology transferred to developing countries in spite of the need to serve a pool of unskilled labor and small capital reserves. Recent doubts about the appropriateness of large industrialization projects have questioned the social and economic benefits of this approach and led to an emphasis on innovative planning for the benefit of the urban and rural poor. This shift assumed that direct attacks on the roots of poverty will be more effective than the trickle-down approach, but development planners now see that technologies can be planned that are not limited to single groups. Official policies, often working against the adoption of appropriate technologies, must consider local needs and local resources. Farm equipment, for example, must minimize the need for skilled labor and maintenance. Planners for appropriate urban technology should emphasize local capability, but should also risk occasional failure in the effort to improve the efficiency of labor.

  18. International Efforts for the Nuclear Security

    International Nuclear Information System (INIS)

    Yoo, Ho Sik; Kwak, Sung Woo; Lee, Ho Jin; Shim, Hye Won; Lee, Jong Uk

    2005-01-01

    Many concerns have been focused on the nuclear security since the 9.11. With increasing the threat related to nuclear material and nuclear facilities, the demand of strengthening the international physical protection system has been raised. Along with this, the international communities are making their efforts to increase nuclear security. The agreement of revising the 'Convention on Physical Protection of Nuclear Materials'(hereafter, CPPNM), which was held in Vienna on the July of 2005, was one of these efforts. U.N is also preparing the 'International Convention for the Suppression of Acts of Nuclear Terrorism' to show its firm resolution against nuclear terror. It is important to understand what measures should be taken to meet the international standard for establishing national physical protection system. To do this, international trend on the physical protection system such as CPPNM and U.N. convention should be followed. This paper explains about the content of the CPPNM and U.N convention. They will be helpful to consolidate the physical protection system in Korea

  19. Sidoarjo mudflow phenomenon and its mitigation efforts

    Science.gov (United States)

    Wibowo, H. T.; Williams, V.

    2009-12-01

    Hot mud first erupted in Siring village, Porong, Sidoarjo May 29th 2006. The mud first appeared approximately 200 meters from Banjarpanji-1 gas-drilling well. The mud volume increased day by day, from 5000 cubic meters per day on June 2006 to 50,000 cubic meters per day during the last of 2006, and then increased to 100,000-120,000 cubic meters per day during 2007. Flow still continues at a high rate. Moreover, as the water content has gone down, the clast content has gone up. Consequently, there is now the threat of large amounts of solid material being erupted throughout the area. Also, there is the issue of subsurface collapse and ground surface subsidence. The Indonesian government has set up a permanent team to support communities affected by the mudflow that has swamped a number of villages near LUSI. Toll roads, railway tracks and factories also have been submerged and over 35,000 people have been displaced to date. The Sidoarjo Mudflow Mitigation Agency [SMMA, BPLS (Indonesia)] replaces a temporary team called National Team PSLS which was installed for seven months and ended their work on 7 April 2007. BPLS was set up by Presidential Regulation No. 14 / 2007, and it will have to cover the costs related to the social impact of the disaster, especially outside the swamped area. BPLS is the central government institution designated to handle the disaster by coordination with both the drilling company and local (provincial and district) governments. It takes a comprehensive, integrated and holistic approach for its mission and challenges. Those are: 1) How to stop the mudflow, 2) How to mitigate the impacts of the mudflow, and 3) How to minimize the social, economic, environmental impacts, and infrastructure impacts. The mudflow mitigation efforts were constrained by dynamic geology conditions, as well as resistance to certain measures by residents of impacted areas. Giant dykes were built to retain the spreading mud, and the mudflow from the main vent was

  20. New directions in the science and technology of advanced sheet explosive formulations and the key energetic materials used in the processing of sheet explosives: Emerging trends.

    Science.gov (United States)

    Talawar, M B; Jangid, S K; Nath, T; Sinha, R K; Asthana, S N

    2015-12-30

    This review presents the work carried out by the international community in the area of sheet explosive formulations and its applications in various systems. The sheet explosive is also named as PBXs and is a composite material in which solid explosive particles like RDX, HMX or PETN are dispersed in a polymeric matrix, forms a flexible material that can be rolled/cut into sheet form which can be applied to any complex contour. The designed sheet explosive must possess characteristic properties such as flexible, cuttable, water proof, easily initiable, and safe handling. The sheet explosives are being used for protecting tanks (ERA), light combat vehicle and futuristic infantry carrier vehicle from different attacking war heads etc. Besides, sheet explosives find wide applications in demolition of bridges, ships, cutting and metal cladding. This review also covers the aspects such as risks and hazard analysis during the processing of sheet explosive formulations, effect of ageing on sheet explosives, detection and analysis of sheet explosive ingredients and the R&D efforts of Indian researchers in the development of sheet explosive formulations. To the best of our knowledge, there has been no review article published in the literature in the area of sheet explosives. Copyright © 2015 Elsevier B.V. All rights reserved.