WorldWideScience

Sample records for technology development methodology

  1. Development of tools, technologies, and methodologies for imaging sensor testing

    Science.gov (United States)

    Lowry, H.; Bynum, K.; Steely, S.; Nicholson, R.; Horne, H.

    2013-05-01

    Ground testing of space- and air-borne imaging sensor systems is supported by Vis-to-LWIR imaging sensor calibration and characterization, as well as hardware-in-the-loop (HWIL) simulation with high-fidelity complex scene projection to validate sensor mission performance. To accomplish this successfully, there must be the development of tools, technologies, and methodologies that are used in space simulation chambers for such testing. This paper provides an overview of such efforts being investigated and implemented at Arnold Engineering Development Complex (AEDC).

  2. Knowledge Consolidation Analysis: Toward a Methodology for Studying the Role of Argument in Technology Development

    Science.gov (United States)

    Dyehouse, Jeremiah

    2007-01-01

    Researchers studying technology development often examine how rhetorical activity contributes to technologies' design, implementation, and stabilization. This article offers a possible methodology for studying one role of rhetorical activity in technology development: knowledge consolidation analysis. Applying this method to an exemplar case, the…

  3. Success Rates by Software Development Methodology in Information Technology Project Management: A Quantitative Analysis

    Science.gov (United States)

    Wright, Gerald P.

    2013-01-01

    Despite over half a century of Project Management research, project success rates are still too low. Organizations spend a tremendous amount of valuable resources on Information Technology projects and seek to maximize the utility gained from their efforts. The author investigated the impact of software development methodology choice on ten…

  4. Success Rates by Software Development Methodology in Information Technology Project Management: A Quantitative Analysis

    Science.gov (United States)

    Wright, Gerald P.

    2013-01-01

    Despite over half a century of Project Management research, project success rates are still too low. Organizations spend a tremendous amount of valuable resources on Information Technology projects and seek to maximize the utility gained from their efforts. The author investigated the impact of software development methodology choice on ten…

  5. Valuation Methodology for Technology Developed at Academic R&D Groups

    Directory of Open Access Journals (Sweden)

    L.R. Vega‐González

    2010-04-01

    Full Text Available This work refers to technology embodied as devices, equipment, software or processes primarily developed at universities indeveloping countries for research or teaching. Sometimes it is also as the result of externally financed projects contracted withindustry. Nearly always technology developed at academic R&D groups results in laboratory prototypes. When it is required todefine the technology transfer (TT contract terms for the license of the university patrimonial rights to external fundingcompanies or other interested parties, a question arises: what is the monetary value? In this paper we present a four‐stepmethod for technology valuation based on the identification of specific value points (SVP related to its development. The finaltechnology value must be within previously defined value limits. The presented methodology is actually being used to valuatesome devices developed at the Centro de Ciencias Aplicadas y Desarrollo Tecnológico (CCADET of the Universidad NacionalAutónoma de México (UNAM.

  6. Develop and demonstrate a methodology using Janus(A) to analyze advanced technologies.

    OpenAIRE

    Wright, Jerry Vernon

    1991-01-01

    Approved for public release; Distribution is unlimited This thesis presents a study of a methodology for analyzing advanced technologies using the Janus(A) High Resolution Combat Model. The goal of this research was to verify that the methodology using Janus(A) gave expected or realistic results. The methodology used a case where the results were known: the addition of a long range direct fire weapon into a force on force battle. Both the weapon characteristics and force mixes were used as...

  7. A methodology to promote business development from research outcomes in food science and technology

    Directory of Open Access Journals (Sweden)

    Eduardo L. Cardoso

    2015-04-01

    Full Text Available Valorization of knowledge produced in research units has been a major challenge for research universities in contemporary societies. The prevailing forces have led these institutions to develop a “third mission”, the facilitation of technology transfer and activity in an entrepreneurial paradigm. Effective management of challenges encountered in the development of academic entrepreneurship and the associated valorization of knowledge produced by universities are major factors to bridge the gap between research and innovation in Europe.The need to improve the existing institutional knowledge valorization processes, concerning entrepreneurship and business development and the processes required were discussed.A case study was designed to describe the institutional knowledge valorization process in a food science and technology research unit and a related incubator, during a five year evaluation period that ended in 2012.The knowledge valorization processes benefited from the adoption of a structured framework methodology that led to ideas and teams from a business model generation to client development, in parallel, when possible, with an agile product/service development.Although academic entrepreneurship engagement could be improved, this case study demonstrated that stronger skills development was needed to enable the researcher to be more aware of business development fundamentals and therefore contribute to research decisions and the valorisation of individual and institutional knowledge assets. It was noted that the timing for involvement of companies in the research projects or programs varied with the nature of the research.

  8. A methodology to promote business development from research outcomes in food science and technology

    Directory of Open Access Journals (Sweden)

    Eduardo L. Cardoso

    2015-04-01

    Full Text Available Valorization of knowledge produced in research units has been a major challenge for research universities in contemporary societies. The prevailing forces have led these institutions to develop a “third mission”, the facilitation of technology transfer and activity in an entrepreneurial paradigm. Effective management of challenges encountered in the development of academic entrepreneurship and the associated valorization of knowledge produced by universities are major factors to bridge the gap between research and innovation in Europe.The need to improve the existing institutional knowledge valorization processes, concerning entrepreneurship and business development and the processes required were discussed.A case study was designed to describe the institutional knowledge valorization process in a food science and technology research unit and a related incubator, during a five year evaluation period that ended in 2012.The knowledge valorization processes benefited from the adoption of a structured framework methodology that led to ideas and teams from a business model generation to client development, in parallel, when possible, with an agile product/service development.Although academic entrepreneurship engagement could be improved, this case study demonstrated that stronger skills development was needed to enable the researcher to be more aware of business development fundamentals and therefore contribute to research decisions and the valorisation of individual and institutional knowledge assets. It was noted that the timing for involvement of companies in the research projects or programs varied with the nature of the research.

  9. Information technology security system engineering methodology

    Science.gov (United States)

    Childs, D.

    2003-01-01

    A methodology is described for system engineering security into large information technology systems under development. The methodology is an integration of a risk management process and a generic system development life cycle process. The methodology is to be used by Security System Engineers to effectively engineer and integrate information technology security into a target system as it progresses through the development life cycle. The methodology can also be used to re-engineer security into a legacy system.

  10. [Methodological approaches to the development of environmentally benign technology for the use of solid waste in iron metallurgy].

    Science.gov (United States)

    Pugin, K G; Vaĭsman, Ia I

    2013-01-01

    On the basis of the life cycle of materials, containing wastes of iron and steel industry, new methodological approaches to the assessment of technologies of the secondary use of wastes are developed A complex criteria for selection of the technology for the use of resource potential of solid waste of iron and steel industry are developed with taking into account environmental, technological and economic indices. The technology of the use of wastes of ferrovanadium industry as bulk solid materials at the solid waste landfill is shown.

  11. Developing Q-methodology to explore staff views toward the use of technology in nurse education.

    Science.gov (United States)

    Petit dit Dariel, Odessa; Wharrad, Heather; Windle, Richard

    2010-01-01

    Technology in education is moving quickly in terms of the hardware and software applications available, but also due to the expectations of an increasingly digitally competent student population. Academics have to rethink their pedagogy in relation to these changes. Nurse educators, in particular, must face the challenge of effectively integrating technology into what is essentially a hands-on, people-centred profession. To date, the factors most commonly cited as barriers to the adoption of e-learning by academics have focused on explicit and tangible ('hard') issues. Less frequently mentioned are the implicit and tacit ('soft') factors which are harder to identify. This article describes a pilot study using Q-methodology to explore the limitations of commonly used research methods in identifying how these hard and soft issues are prioritised by individuals, through the voices of nurse educators.

  12. Duct injection technology prototype development: Scale-up methodology and engineering design criteria

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    The objective of the Duct Injection Technology Prototype Development project is to develop a sound design basis for applying duct injection technology as a post-combustion SO{sub 2} emissions control method to existing, pre-NSPS, coal-fired power plants. This report is divided into five major topics: (1) design criteria; (2) engineering drawings; (3) equipment sizing and design; (4) plant and equipment arrangement considerations; and (5) equipment bid specification guidelines.

  13. Data Centric Development Methodology

    Science.gov (United States)

    Khoury, Fadi E.

    2012-01-01

    Data centric applications, an important effort of software development in large organizations, have been mostly adopting a software methodology, such as a waterfall or Rational Unified Process, as the framework for its development. These methodologies could work on structural, procedural, or object oriented based applications, but fails to capture…

  14. Technology assessment of solar energy systems. Scenario development and methodology. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Schiffman, Y.M.

    1981-07-01

    Included are a general overview of the Technology Assessment of Solar Energy systems (TASE) project and a description of the study approach, the development of the TASE scenarios, energy and environmental assumptions, and assumptions and forecasts of the FOSSIL2 National Energy Model upon which the TASE scenarios were based. The Strategic Environmental Assessment System (SEAS) model was used to generate the analytical data base for TASE. Improvements made to SEAS to allow it to model solar and biomass energy technologies are also described.

  15. Advanced biosensing methodologies developed for evaluating performance quality and safety of emerging biophotonics technologies and medical devices (Conference Presentation)

    Science.gov (United States)

    Ilev, Ilko K.; Walker, Bennett; Calhoun, William; Hassan, Moinuddin

    2016-03-01

    Biophotonics is an emerging field in modern biomedical technology that has opened up new horizons for transfer of state-of-the-art techniques from the areas of lasers, fiber optics and biomedical optics to the life sciences and medicine. This field continues to vastly expand with advanced developments across the entire spectrum of biomedical applications ranging from fundamental "bench" laboratory studies to clinical patient "bedside" diagnostics and therapeutics. However, in order to translate these technologies to clinical device applications, the scientific and industrial community, and FDA are facing the requirement for a thorough evaluation and review of laser radiation safety and efficacy concerns. In many cases, however, the review process is complicated due the lack of effective means and standard test methods to precisely analyze safety and effectiveness of some of the newly developed biophotonics techniques and devices. There is, therefore, an immediate public health need for new test protocols, guidance documents and standard test methods to precisely evaluate fundamental characteristics, performance quality and safety of these technologies and devices. Here, we will overview our recent developments of novel test methodologies for safety and efficacy evaluation of some emerging biophotonics technologies and medical devices. These methodologies are based on integrating the advanced features of state-of-the-art optical sensor technologies and approaches such as high-resolution fiber-optic sensing, confocal and optical coherence tomography imaging, and infrared spectroscopy. The presentation will also illustrate some methodologies developed and implemented for testing intraocular lens implants, biochemical contaminations of medical devices, ultrahigh-resolution nanoscopy, and femtosecond laser therapeutics.

  16. An analysis of complex multiple-choice science-technology-society items: Methodological development and preliminary results

    Science.gov (United States)

    Vázquez-Alonso, Ángel; Manassero-Mas, María-Antonia; Acevedo-Díaz, José-Antonio

    2006-07-01

    The scarce attention to the assessment and evaluation in science education research has been especially harmful for teaching science-technology-society (STS) issues, due to the dialectical, tentative, value-laden, and polemic nature of most STS topics. This paper tackles the methodological difficulties of the instruments that monitor views related to STS topics and rationalizes a quantitative methodology and an analysis technique to improve the utility of an empirically developed multiple-choice item pool, the Questionnaire of Opinions on STS. This methodology embraces an item-scaling psychometrics based on the judgments by a panel of experts, a multiple response model, a scoring system, and the data analysis. The methodology finally produces normalized attitudinal indices that represent the respondent's reasoned beliefs toward STS statements, the respondent's position on an item that comprises several statements, or the respondent's position on an entire STS topic that encompasses a set of items. Some preliminary results show the methodology's ability to evaluate the STS attitudes in a qualitative and quantitative way and for statistical hypothesis testing. Lastly, some applications for teacher training and STS curriculum development in science classrooms are discussed.

  17. A Study on Establishing National Technology Strategy of Fusion Energy Development: Combining PEST-SWOT Methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Han Soo; Choi, Won Jae; Tho, Hyun Soo; Kang, Dong Yup; Kim, In Chung [National Fusion Research Institute, Daejeon (Korea, Republic of)

    2012-05-15

    Nuclear fusion, the joining of light nuclei of hydrogen into heavier nuclei of helium, has potential environmental, safety and proliferation characteristics as an energy source. It can also, provide an adequate amount of fuel to power civilization for a long time compared to human history. It is, however, more challenging to convert to an energy source than nuclear fission. To overcome this, Korea enacted a law to promote the development of fusion as an energy source in 2007. In accordance with this law, the government will establish a promotion plan to develop fusion energy, including policy goals, a framework, strategies, infrastructure, funding, human resources, international cooperation and etc. This will be reviewed every five years. This paper is focused on the combining PEST (political, economic, social and technological) method with SWOT (strength, weakness, opportunity and threat) analysis, which is a prerequisite to form national fusion energy technology strategy

  18. Scenario development methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Eng, T. [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Hudson, J. [Rock Engineering Consultants, Welwyn Garden City, Herts (United Kingdom); Stephansson, O. [Royal Inst. of Tech., Stockholm (Sweden). Div. of Engineering Geology; Skagius, K.; Wiborgh, M. [Kemakta, Stockholm (Sweden)

    1994-11-01

    In the period 1981-1994, SKB has studied several methodologies to systematize and visualize all the features, events and processes (FEPs) that can influence a repository for radioactive waste in the future. All the work performed is based on the terminology and basic findings in the joint SKI/SKB work on scenario development presented in the SKB Technical Report 89-35. The methodologies studied are (a) Event tree analysis, (b) Influence diagrams and (c) Rock Engineering Systems (RES) matrices. Each one of the methodologies is explained in this report as well as examples of applications. One chapter is devoted to a comparison between the two most promising methodologies, namely: Influence diagrams and the RES methodology. In conclusion a combination of parts of the Influence diagram and the RES methodology is likely to be a promising approach. 26 refs.

  19. Methodology for urban rail and construction technology research and development planning

    Science.gov (United States)

    Rubenstein, L. D.; Land, J. E.; Deshpande, G.; Dayman, B.; Warren, E. H.

    1980-01-01

    A series of transit system visits, organized by the American Public Transit Association (APTA), was conducted in which the system operators identified the most pressing development needs. These varied by property and were reformulated into a series of potential projects. To assist in the evaluation, a data base useful for estimating the present capital and operating costs of various transit system elements was generated from published data. An evaluation model was developed which considered the rate of deployment of the research and development project, potential benefits, development time and cost. An outline of an evaluation methodology that considered benefits other than capital and operating cost savings was also presented. During the course of the study, five candidate projects were selected for detailed investigation; (1) air comfort systems; (2) solid state auxiliary power conditioners; (3) door systems; (4) escalators; and (5) fare collection systems. Application of the evaluation model to these five examples showed the usefulness of modeling deployment rates and indicated a need to increase the scope of the model to quantitatively consider reliability impacts.

  20. Challenges in developing a methodology for reviewing Nordic research on media and technology in MTE

    DEFF Research Database (Denmark)

    Elf, Nikolaj Frydensbjerg; Hanghøj, Thorkild

    2013-01-01

    , Sweden and Norway, hence applying a ‘transnational’, regional perspective. Research question Using Danish research on M&T in MTE as a case study, how should a valid methodology for the review of research on M&T in MTE be designed and applied? Method Inspired by the Campbell method, the research...

  1. Theoretical and methodological foundations of technological management

    Directory of Open Access Journals (Sweden)

    L.O. Ligonenko

    2016-09-01

    Full Text Available The aim of the article. In the article there are critically analyzed the existing developments about the content, objectives and functions of technological management, which allowed to identify such approaches as target, process, functional, philosophical, resource and competitive ones. The results of the analysis. While integrating them there was formed the author's interpretation of theoretical and methodological foundations of this relatively new functional type of management for Ukraine, which represented the system of principles and methods of taking and implementing complex management decisions aimed at efficient use of available technological resources and technological development of the company. There are also grounded the purposes of technological management, which are: technological development of enterprises, that is purposeful, continuous (constantly organized process of irreversible changes in production processes (technologies of enterprise economic activity that provoke (cause the corresponding development of the fixed assets (which provide them, staff (which implements and use them and intangible assets (which identify their creation or use, which together enable to ensure technological competitiveness of the enterprise and development of the market of technologies in general. The object of such management is defined, which are: technological processes, preconditions (technological potential and the consequences of their implementation (technological competitiveness of the enterprise. There are identified the key subjects of technological management, their interests and spheres of responsibilities. The methodological basis of technological management is considered to be the concept of open innovations by H. Chesbro which, on the one hand, means deliberate involvement of external ideas and technologies; active cooperation of all stakeholders in the company as to the formation of new ideas aimed at systematic improving the product

  2. Technology Performance Level Assessment Methodology.

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, Jesse D.; Bull, Diana L; Malins, Robert Joseph; Costello, Ronan Patrick; Aurelien Babarit; Kim Nielsen; Claudio Bittencourt Ferreira; Ben Kennedy; Kathryn Dykes; Jochem Weber

    2017-04-01

    The technology performance level (TPL) assessments can be applied at all technology development stages and associated technology readiness levels (TRLs). Even, and particularly, at low TRLs the TPL assessment is very effective as it, holistically, considers a wide range of WEC attributes that determine the techno-economic performance potential of the WEC farm when fully developed for commercial operation. The TPL assessment also highlights potential showstoppers at the earliest possible stage of the WEC technology development. Hence, the TPL assessment identifies the technology independent “performance requirements.” In order to achieve a successful solution, the entirety of the performance requirements within the TPL must be considered because, in the end, all the stakeholder needs must be achieved. The basis for performing a TPL assessment comes from the information provided in a dedicated format, the Technical Submission Form (TSF). The TSF requests information from the WEC developer that is required to answer the questions posed in the TPL assessment document.

  3. THE CLUSTER APPROACH TO INNOVATION AND TECHNOLOGICAL DEVELOPMENT OF RUSSIA AND UKRAINE: methodological and organizational issues

    Directory of Open Access Journals (Sweden)

    N. I. Komkov

    2013-01-01

    Full Text Available The methodical and organizational problems of the cluster approach to economic development. Notes a number of important conditions and signs of cluster formation: innovation, competitiveness, voluntary, mutually beneficial participation in the cluster. The problems of the formation of clusters inRussiaandUkraine. The problems of the formation and management of shared clusterRussiaandUkraine

  4. An Analysis of Complex Multiple-Choice Science-Technology-Society Items: Methodological Development and Preliminary Results

    Science.gov (United States)

    Vazquez-Alonso, Angel; Manassero-Mas, Maria-Antonia; Acevedo-Diaz, Jose-Antonio

    2006-01-01

    The scarce attention to the assessment and evaluation in science education research has been especially harmful for teaching science-technology-society (STS) issues, due to the dialectical, tentative, value-laden, and polemic nature of most STS topics. This paper tackles the methodological difficulties of the instruments that monitor views related…

  5. The development of verification and validation technology for instrumentation and control in NPPs - A study on the software development methodology of a highly reliable software

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Yong Rae; Cha, Sung Deok; Lee, Woo Jin; Chae, Hong Seok; Yoon, Kwang Sik; Jeong, Ki Suk [Korea Advanced Institute of Science and Technology,= Taejon (Korea, Republic of)

    1996-07-01

    Nuclear industries have tried to use the digital I and C technology in developing advanced nuclear power plants. However, because the industries did= not establish the highly reliable software development methodologies and standards applied to developing the highly reliable and safe software for digital I and C systems, they were confronted with the difficulties to avoid software common mode failures. To mitigate the difficulties, the highly reliable software development environments and methodologies and validation and verification techniques should be the cornerstone of all digital implementation in nuclear power plants. The objectives of this project is to establish the highly reliable software development methodology to support developing digital instrumentation and control systems in nuclear power plants. In this project, we have investigated the business-oriented and the real-time software development methods and techniques for ensuring safety and reliability of the software. Also we have studied standards related to licensing the software for digital I and C systems. 50 refs., 51 figs. (author)

  6. DIGITAL TECHNOLOGY BUSINESS CASE METHODOLOGY GUIDE & WORKBOOK

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken; Lawrie, Sean; Hart, Adam; Vlahoplus, Chris

    2014-09-01

    Performance advantages of the new digital technologies are widely acknowledged, but it has proven difficult for utilities to derive business cases for justifying investment in these new capabilities. Lack of a business case is often cited by utilities as a barrier to pursuing wide-scale application of digital technologies to nuclear plant work activities. The decision to move forward with funding usually hinges on demonstrating actual cost reductions that can be credited to budgets and thereby truly reduce O&M or capital costs. Technology enhancements, while enhancing work methods and making work more efficient, often fail to eliminate workload such that it changes overall staffing and material cost requirements. It is critical to demonstrate cost reductions or impacts on non-cost performance objectives in order for the business case to justify investment by nuclear operators. This Business Case Methodology approaches building a business case for a particular technology or suite of technologies by detailing how they impact an operator in one or more of the three following areas: Labor Costs, Non-Labor Costs, and Key Performance Indicators (KPIs). Key to those impacts will be identifying where the savings are “harvestable,” meaning they result in an actual reduction in headcount and/or cost. The report consists of a Digital Technology Business Case Methodology Guide and an accompanying spreadsheet workbook that will enable the user to develop a business case.

  7. Technological Forecasting: Methodology Embrapa Brazilian Company

    Directory of Open Access Journals (Sweden)

    Eliane Fernandes Pietrovski

    2017-04-01

    Full Text Available Structural, economic and social changes are present in organizations. One of the strategies for decision-making, which leads to organizational policies, is the construction of feasible and doable technological scenarios that enable innovations to trigger the processes of technological change. This study to analyze the prospect of technological scenarios in the Brazilian Agricultural Research Agency a public organization of Research, Development and Innovation, based on scenario building in its operating environment. For the methodological procedures, a systemic review addressing the problem of searching for qualitative bias was developed. Taking this study’s point of view, the research is exploratory and descriptive. The sources of data collection were primary and secondary. The technical consistency of prospective scenarios for the company was highlighted in the results of this study, as this was the object of this analysis. Through the collected data it was possible to verify the inferences between literature and the applied method. [JEL Classification: O310].

  8. Cost analysis methodology: Photovoltaic Manufacturing Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    Whisnant, R.A. (Research Triangle Inst., Research Triangle Park, NC (United States))

    1992-09-01

    This report describes work done under Phase 1 of the Photovoltaic Manufacturing Technology (PVMaT) Project. PVMaT is a five-year project to support the translation of research and development in PV technology into the marketplace. PVMaT, conceived as a DOE/industry partnership, seeks to advanced PV manufacturing technologies, reduce PV module production costs, increase module performance, and expand US commercial production capacities. Under PVMaT, manufacturers will propose specific manufacturing process improvements that may contribute to the goals of the project, which is to lessen the cost, thus hastening entry into the larger scale, grid-connected applications. Phase 1 of the PVMaT project is to identify obstacles and problems associated with manufacturing processes. This report describes the cost analysis methodology required under Phase 1 that will allow subcontractors to be ranked and evaluated during Phase 2.

  9. Duct injection technology prototype development: Scale-up methodology and engineering design criteria. Topical report No. 4

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    The objective of the Duct Injection Technology Prototype Development project is to develop a sound design basis for applying duct injection technology as a post-combustion SO{sub 2} emissions control method to existing, pre-NSPS, coal-fired power plants. This report is divided into five major topics: (1) design criteria; (2) engineering drawings; (3) equipment sizing and design; (4) plant and equipment arrangement considerations; and (5) equipment bid specification guidelines.

  10. Financial options methodology for analyzing investments in new technology

    Science.gov (United States)

    Wenning, B. D.

    1995-01-01

    The evaluation of investments in longer term research and development in emerging technologies, because of the nature of such subjects, must address inherent uncertainties. Most notably, future cash flow forecasts include substantial uncertainties. Conventional present value methodology, when applied to emerging technologies severely penalizes cash flow forecasts, and strategic investment opportunities are at risk of being neglected. Use of options evaluation methodology adapted from the financial arena has been introduced as having applicability in such technology evaluations. Indeed, characteristics of superconducting magnetic energy storage technology suggest that it is a candidate for the use of options methodology when investment decisions are being contemplated.

  11. Financial options methodology for analyzing investments in new technology

    Energy Technology Data Exchange (ETDEWEB)

    Wenning, B.D. [Texas Utilities Services, Inc., Dallas, TX (United States)

    1994-12-31

    The evaluation of investments in longer term research and development in emerging technologies, because of the nature of such subjects, must address inherent uncertainties. Most notably, future cash flow forecasts include substantial uncertainties. Conventional present value methodology, when applied to emerging technologies severely penalizes cash flow forecasts, and strategic investment opportunities are at risk of being neglected. Use of options valuation methodology adapted from the financial arena has been introduced as having applicability in such technology evaluations. Indeed, characteristics of superconducting magnetic energy storage technology suggest that it is a candidate for the use of options methodology when investment decisions are being contemplated.

  12. Novel methodology to examine cognitive and experiential factors in language development: combining eye-tracking and LENA technology.

    Science.gov (United States)

    Odean, Rosalie; Nazareth, Alina; Pruden, Shannon M

    2015-01-01

    Developmental systems theory posits that development cannot be segmented by influences acting in isolation, but should be studied through a scientific lens that highlights the complex interactions between these forces over time (Overton, 2013a). This poses a unique challenge for developmental psychologists studying complex processes like language development. In this paper, we advocate for the combining of highly sophisticated data collection technologies in an effort to move toward a more systemic approach to studying language development. We investigate the efficiency and appropriateness of combining eye-tracking technology and the LENA (Language Environment Analysis) system, an automated language analysis tool, in an effort to explore the relation between language processing in early development, and external dynamic influences like parent and educator language input in the home and school environments. Eye-tracking allows us to study language processing via eye movement analysis; these eye movements have been linked to both conscious and unconscious cognitive processing, and thus provide one means of evaluating cognitive processes underlying language development that does not require the use of subjective parent reports or checklists. The LENA system, on the other hand, provides automated language output that describes a child's language-rich environment. In combination, these technologies provide critical information not only about a child's language processing abilities but also about the complexity of the child's language environment. Thus, when used in conjunction these technologies allow researchers to explore the nature of interacting systems involved in language development.

  13. Novel methodology to examine cognitive and experiential factors in language development: combining eye-tracking and LENA technology

    Science.gov (United States)

    Odean, Rosalie; Nazareth, Alina; Pruden, Shannon M.

    2015-01-01

    Developmental systems theory posits that development cannot be segmented by influences acting in isolation, but should be studied through a scientific lens that highlights the complex interactions between these forces over time (Overton, 2013a). This poses a unique challenge for developmental psychologists studying complex processes like language development. In this paper, we advocate for the combining of highly sophisticated data collection technologies in an effort to move toward a more systemic approach to studying language development. We investigate the efficiency and appropriateness of combining eye-tracking technology and the LENA (Language Environment Analysis) system, an automated language analysis tool, in an effort to explore the relation between language processing in early development, and external dynamic influences like parent and educator language input in the home and school environments. Eye-tracking allows us to study language processing via eye movement analysis; these eye movements have been linked to both conscious and unconscious cognitive processing, and thus provide one means of evaluating cognitive processes underlying language development that does not require the use of subjective parent reports or checklists. The LENA system, on the other hand, provides automated language output that describes a child’s language-rich environment. In combination, these technologies provide critical information not only about a child’s language processing abilities but also about the complexity of the child’s language environment. Thus, when used in conjunction these technologies allow researchers to explore the nature of interacting systems involved in language development. PMID:26379591

  14. Customization of Project Management Techniques for the Construction of IT - Information Technology Systems with the Development Methodologies Known as Agile Processes

    Directory of Open Access Journals (Sweden)

    Altino José Mentzingen de Moraes

    2016-08-01

    Full Text Available The theory presented by PMBoK© - Project Management Book of Knowledge [1], edited and maintained by PMI - Project Management Institute, which deals with the issues of how to administrate a Project efficiently and planned, is already widely known and recognized by the world professional community as a strong orientation of best practices and effective working tool in this field. The PMBoK© - Project Management Book of Knowledge directs the Phases and the Disciplines that must be addressed in leading a Project, whether it be, both to meet the construction of projects in Engineering Area or to meet the System Development Projects in the Area of IT - Information Technology. In the latter Area, namely the area of IT - Information Technology, the theory presented by PMBoK© - Project Management Book of Knowledge is already intensively applied for some decades. However, the System Development Methodologies in IT - Information Technology area is being reviewed by the emergence of new technical resources and new visions of interpretation of the business by the Organizations. In that way, this study intends to evaluate the current impact of these revisions (in System Development Methodologies in IT - Information Technology area may result in new versions of the PMBoK© - Project Management Book of Knowledge, which, also implemented revisions and at this moment is in its 5th.Edition. In conclusion, after some simulations in a practical environment, it is verified the usefulness of this paper (and its "Table of Definition of Specific Features of Project", which try to support the decision about what is the best System Development Methodology in IT - Information Technology area to be applied to a specific Project as an effective management and planning tool in corporate real world.

  15. Expert Systems Development Methodology

    Science.gov (United States)

    1989-07-28

    expert systems has been hardware development. In the middle 1950’s at the very birth of AI, hardware was large very slow and extremely expensive. In...into another report. For example, MOBPLEX provides output into the Lotus spreadsheet as a semi-automated destination. From the spreadsheet the user of...designed on top of the Lotus 1-2- 3 interface. Lotus was used because it was decided there was no need to build a powerful ad hoc report generator

  16. Solar thermal technology development: Estimated market size and energy cost savings. Volume 2: Assumptions, methodology and results

    Science.gov (United States)

    Gates, W. R.

    1983-01-01

    Estimated future energy cost savings associated with the development of cost-competitive solar thermal technologies (STT) are discussed. Analysis is restricted to STT in electric applications for 16 high-insolation/high-energy-price states. Three fuel price scenarios and three 1990 STT system costs are considered, reflecting uncertainty over future fuel prices and STT cost projections. Solar thermal technology research and development (R&D) is found to be unacceptably risky for private industry in the absence of federal support. Energy cost savings were projected to range from $0 to $10 billion (1990 values in 1981 dollars), depending on the system cost and fuel price scenario. Normal R&D investment risks are accentuated because the Organization of Petroleum Exporting Countries (OPEC) cartel can artificially manipulate oil prices and undercut growth of alternative energy sources. Federal participation in STT R&D to help capture the potential benefits of developing cost-competitive STT was found to be in the national interest. Analysis is also provided regarding two federal incentives currently in use: The Federal Business Energy Tax Credit and direct R&D funding.

  17. Solar thermal technology development: Estimated market size and energy cost savings. Volume 2: Assumptions, methodology and results

    Science.gov (United States)

    Gates, W. R.

    1983-02-01

    Estimated future energy cost savings associated with the development of cost-competitive solar thermal technologies (STT) are discussed. Analysis is restricted to STT in electric applications for 16 high-insolation/high-energy-price states. Three fuel price scenarios and three 1990 STT system costs are considered, reflecting uncertainty over future fuel prices and STT cost projections. Solar thermal technology research and development (R&D) is found to be unacceptably risky for private industry in the absence of federal support. Energy cost savings were projected to range from $0 to $10 billion (1990 values in 1981 dollars), depending on the system cost and fuel price scenario. Normal R&D investment risks are accentuated because the Organization of Petroleum Exporting Countries (OPEC) cartel can artificially manipulate oil prices and undercut growth of alternative energy sources. Federal participation in STT R&D to help capture the potential benefits of developing cost-competitive STT was found to be in the national interest. Analysis is also provided regarding two federal incentives currently in use: The Federal Business Energy Tax Credit and direct R&D funding.

  18. [Adaptive clinical study methodologies in drug development].

    Science.gov (United States)

    Antal, János

    2015-11-29

    The evolution of drug development in human, clinical phase studies triggers the overview of those technologies and procedures which are labelled as adaptive clinical trials. The most relevant procedural and operational aspects will be discussed in this overview from points of view of clinico-methodological aspect.

  19. ISE System Development Methodology Manual

    Energy Technology Data Exchange (ETDEWEB)

    Hayhoe, G.F.

    1992-02-17

    The Information Systems Engineering (ISE) System Development Methodology Manual (SDM) is a framework of life cycle management guidelines that provide ISE personnel with direction, organization, consistency, and improved communication when developing and maintaining systems. These guide-lines were designed to allow ISE to build and deliver Total Quality products, and to meet the goals and requirements of the US Department of Energy (DOE), Westinghouse Savannah River Company, and Westinghouse Electric Corporation.

  20. Simulation and Modeling Methodologies, Technologies and Applications

    CERN Document Server

    Filipe, Joaquim; Kacprzyk, Janusz; Pina, Nuno

    2014-01-01

    This book includes extended and revised versions of a set of selected papers from the 2012 International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2012) which was sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC) and held in Rome, Italy. SIMULTECH 2012 was technically co-sponsored by the Society for Modeling & Simulation International (SCS), GDR I3, Lionphant Simulation, Simulation Team and IFIP and held in cooperation with AIS Special Interest Group of Modeling and Simulation (AIS SIGMAS) and the Movimento Italiano Modellazione e Simulazione (MIMOS).

  1. Software development methodology for high consequence systems

    Energy Technology Data Exchange (ETDEWEB)

    Baca, L.S.; Bouchard, J.F.; Collins, E.W.; Eisenhour, M.; Neidigk, D.D.; Shortencarier, M.J.; Trellue, P.A.

    1997-10-01

    This document describes a Software Development Methodology for High Consequence Systems. A High Consequence System is a system whose failure could lead to serious injury, loss of life, destruction of valuable resources, unauthorized use, damaged reputation or loss of credibility or compromise of protected information. This methodology can be scaled for use in projects of any size and complexity and does not prescribe any specific software engineering technology. Tasks are described that ensure software is developed in a controlled environment. The effort needed to complete the tasks will vary according to the size, complexity, and risks of the project. The emphasis of this methodology is on obtaining the desired attributes for each individual High Consequence System.

  2. Developing collaborative environments - A Holistic software development methodology

    Energy Technology Data Exchange (ETDEWEB)

    PETERSEN,MARJORIE B.; MITCHINER,JOHN L.

    2000-03-08

    Sandia National Laboratories has been developing technologies to support person-to-person collaboration and the efforts of teams in the business and research communities. The technologies developed include knowledge-based design advisors, knowledge management systems, and streamlined manufacturing supply chains. These collaborative environments in which people can work together sharing information and knowledge have required a new approach to software development. The approach includes an emphasis on the requisite change in business practice that often inhibits user acceptance of collaborative technology. Leveraging the experience from this work, they have established a multidisciplinary approach for developing collaborative software environments. They call this approach ``A Holistic Software Development Methodology''.

  3. A cost evaluation methodology for surgical technologies.

    Science.gov (United States)

    Ismail, Imad; Wolff, Sandrine; Gronfier, Agnes; Mutter, Didier; Swanström, Lee L; Swantröm, Lee L

    2015-08-01

    To create and validate a micro-costing methodology that surgeons and hospital administrators can use to evaluate the cost of implementing innovative surgical technologies. Our analysis is broken down into several elements of fixed and variable costs which are used to effectively and easily calculate the cost of surgical operations. As an example of application, we use data from 86 robot assisted gastric bypass operations made in our hospital. To validate our methodology, we discuss the cost reporting approaches used in 16 surgical publications with respect to 7 predefined criteria. Four formulas are created which allow users to import data from their health system or particular situation and derive the total cost. We have established that the robotic surgical system represents 97.53 % of our operating room's medical device costs which amounts to $4320.11. With a mean surgery time of 303 min, personnel cost per operation amounts to $1244.73, whereas reusable instruments and disposable costs are, respectively, $1539.69 and $3629.55 per case. The literature survey demonstrates that the cost of surgery is rarely reported or emphasized, and authors who do cover this concept do so with variable methodologies which make their findings difficult to interpret. Using a micro-costing methodology, it is possible to identify the cost of any new surgical procedure/technology using formulas that can be adapted to a variety of operations and healthcare systems. We hope that this paper will provide guidance for decision makers and a means for surgeons to harmonise cost reporting in the literature.

  4. TOWARDS A NEW METHODOLOGY FOR WEB GIS DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Fanon Ananda1

    2016-07-01

    Full Text Available There has been an increasing need for geospatial information that is delivered through internet technologies. This broad category of systems is referred to as Web Geographic Information Systems (Web GIS. These systems exhibit characteristics common to both stand-alone and web-based systems making it necessary to apply a hybrid methodology during their development. This paper proposes a methodology for developing Web GIS that is herein referred to as the Y-Model Web GIS Development Methodology (YWDM which has been adapted from existing software development methodologies and applied to the context of Web GIS development. The paper outlines in details the phases of the methodology. Its viability as a methodology has been tested through its use in the implementation of the Emuhaya Web GIS portal. The methodology presented here is not intended to be a rigid guide for web GIS development but instead it provides a useful framework for guiding the process.

  5. Practical implications of rapid development methodologies

    CSIR Research Space (South Africa)

    Gerber, A

    2007-11-01

    Full Text Available Rapid development methodologies are popular approaches for the development of modern software systems. The goals of these methodologies are the inclusion of the client into the analysis, design and implementation activities, as well...

  6. Application of agile methodologies in software development

    Directory of Open Access Journals (Sweden)

    Jovanović Aca D.

    2016-01-01

    Full Text Available The paper presents the potentials for the development of software using agile methodologies. Special consideration is devoted to the potentials and advantages of use of the Scrum methodology in the development of software and the relationship between the implementation of agile methodologies and the software development projects.

  7. Human-Systems Integration (HSI) Methodology Development for NASA Project

    Data.gov (United States)

    National Aeronautics and Space Administration — A technology with game-changing potential for crew to space system interaction will be selected to develop using the HSI Methodology created through the efforts of...

  8. Risk management in methodologies of information technology and communications projects

    Directory of Open Access Journals (Sweden)

    Jonathan Carrillo

    2013-12-01

    Full Text Available (Received: 2013/10/02 - Accepted: 2013/12/13At present there are methodologies that have several alternatives and methods to manage projects of Information and Communication Technologies. However, these do not cover a solution for the technology events that can occur in the industry, government, education, among others. In the technology market there are several models to identify and analyze risks according to relevant aspects of their area of specialty e.g. projects, in software development, communications, information security and business alignment. For this reason, this research conducted an evaluation of risk management activities of the methodologies used mostly to know which of them includes more correspondence with basic elements of IT using a rating scale.

  9. 'Emerging technologies for the changing global market' - Prioritization methodology for chemical replacement

    Science.gov (United States)

    Cruit, Wendy; Schutzenhofer, Scott; Goldberg, Ben; Everhart, Kurt

    1993-01-01

    This project served to define an appropriate methodology for effective prioritization of technology efforts required to develop replacement technologies mandated by imposed and forecast legislation. The methodology used is a semiquantitative approach derived from quality function deployment techniques (QFD Matrix). This methodology aims to weight the full environmental, cost, safety, reliability, and programmatic implications of replacement technology development to allow appropriate identification of viable candidates and programmatic alternatives. The results will be implemented as a guideline for consideration for current NASA propulsion systems.

  10. Formalizing the ISDF Software Development Methodology

    Directory of Open Access Journals (Sweden)

    Mihai Liviu DESPA

    2015-01-01

    Full Text Available The paper is aimed at depicting the ISDF software development methodology by emphasizing quality management and software development lifecycle. The ISDF methodology was built especially for innovative software development projects. The ISDF methodology was developed empirically by trial and error in the process of implementing multiple innovative projects. The research process began by analysing key concepts like innovation and software development and by settling the important dilemma of what makes a web application innovative. Innovation in software development is presented from the end-user, project owner and project manager’s point of view. The main components of a software development methodology are identified. Thus a software development methodology should account for people, roles, skills, teams, tools, techniques, processes, activities, standards, quality measuring tools, and team values. Current software development models are presented and briefly analysed. The need for a dedicated innovation oriented software development methodology is emphasized by highlighting shortcomings of current software development methodologies when tackling innovation. The ISDF methodology is presented in the context of developing an actual application. The ALHPA application is used as a case study for emphasizing the characteristics of the ISDF methodology. The development life cycle of the ISDF methodology includes research, planning, prototyping, design, development, testing, setup and maintenance. Artefacts generated by the ISDF methodology are presented. Quality is managed in the ISDF methodology by assessing compliance, usability, reliability, repeatability, availability and security. In order to properly asses each quality component a dedicated indicator is built. A template for interpreting each indicator is provided. Conclusions are formulated and new related research topics are submitted for debate.

  11. A Probabilistic Ontology Development Methodology

    Science.gov (United States)

    2014-06-01

    Model-Based Systems Engineering (MBSE) Methodologies," Seattle, 2008. [17] Jeffrey O. Grady, System Requirements Analysis. New York: McGraw-Hill, Inc...software. [Online]. http://www.norsys.com/index.html [26] Lise Getoor, Nir Friedman, Daphne Koller, Avi Pfeffer , and Ben Taskar, "Probabilistic

  12. Methodology for vocational psychodiagnostics of senior schoolchildren using information technologies

    Science.gov (United States)

    Bogdanovskaya, I. M.; Kosheleva, A. N.; Kiselev, P. B.; Davydova, Yu. A.

    2017-01-01

    The article identifies the role and main problems of vocational psychodiagnostics in modern socio-cultural conditions. It analyzes the potentials of information technologies in vocational psychodiagnostics of senior schoolchildren. The article describes the theoretical and methodological grounds, content and diagnostic potentials of the computerized method in vocational psychodiagnostics. The computerized method includes three blocks of sub-tests to identify intellectual potential, personal qualities, professional interests and values, career orientations, as well as subtests to analyze the specific life experience of senior schoolchildren. The results of diagnostics allow developing an integrated psychodiagnostic conclusion with recommendations. The article contains options of software architecture for the given method.

  13. CONCERNING CORRELATION BETWEEN METHODOLOGY AND TECHNOLOGY IN PEDAGOGICAL RESEARCH

    Directory of Open Access Journals (Sweden)

    Vladimir I. Zagvyazinsky

    2015-01-01

    Full Text Available The purpose of the paper is the continuation of a cycle of the methodological articles, called to help work of young researchers.The general dissatisfaction with quality and results of research work in an education sphere and pedagogics has been largely caused not only insufficient level of methodological culture of competitors of scientific degrees and researchers-experts, but also their inability to choose a work technology of procedure of research that will be adequate to the purposes, problems and a plan of it. The present article is also devoted to this problem.Methods. The methods of the analysis, synthesis, idealisation, generalisation of author’s experience, a concrete definition and modelling are used.Results and scientific novelty. The general technology of scientific search in an education sphere is presented; the technology is developed on the basis of long-term experience of the Tyumen scientific and pedagogical school, and justified in practice. The author doesn’t take into consideration the rigid technology of algorithmic type which is hardly useful in works of creative character; but in the present case – frame technology that defines the expedient organisation, sequence of stages of work and its corresponding maintenance. The following technology components are described: self-determination of the researcher or research group on the basis of creation and the statement of the developed project of all procedures of search; statement of questions on initial allocation of the problem conducting ideas, a plan-way of its realisation; project performance, its ascertaining and a reformative part, research procedures (the basic stage; summarising, generalisation of the research performed, a writing of the text of report documents, preparation of total publications. Examples of typical errors of the young scientists who do not own the technology of scientific activity are given.Practical significance. Proposed recommendations stated

  14. Development of core technology for KNGR system design; development of quantitative reliability evaluation methodologies of KNGR digital I and C components

    Energy Technology Data Exchange (ETDEWEB)

    Seong, Poong Hyun; Choi, Jong Gyun; Kim, Ung Soo; Kim, Jong Hyun; Kim, Man Cheol; Lee, Seung Jun; Lee, Young Je; Ha, Jun Soo [Korea Advanced Institute of Science and Technology, Taejeon (Korea)

    2002-03-01

    For the digital systems to be applied to the nuclear industry, which has its unique conservertive to safety, reliability assessment of digital systems is a prerequisite. But, because digital systems show different failure modes from compared to existing analog systems, the existing reliability assessment method cannot be applied to digital systems. It means that a new reliability assessment method for digital systems should be developed. The goal of this study is development of reliability assessment method for digital systems on board level and related software tool. To achieve the goal, we have conducted researches on development of a database for hardware components for digital I and C systems, development of a reliability assessment model for the reliability prediction of digital systems on board level, and the applicability to KNGR digital I and C systems. We developed a database for reliability assessment of digital hardware components, a reliability assessment method for digital systems with consideration of software and hardware together, and a software tool for the reliability assessment of digital systems, which is named as RelPredic. We plan to apply the results of this study to the reliability assessment of digital systems in KNGR digital I and C systems. 13 refs., 71 figs., 31 tabs. (Author)

  15. Photovoltaic module energy rating methodology development

    Energy Technology Data Exchange (ETDEWEB)

    Kroposki, B.; Myers, D.; Emery, K.; Mrig, L. [National Renewable Energy Lab., Golden, CO (United States); Whitaker, C.; Newmiller, J. [Endecon Engineering, San Ramon, CA (United States)

    1996-05-01

    A consensus-based methodology to calculate the energy output of a PV module will be described in this paper. The methodology develops a simple measure of PV module performance that provides for a realistic estimate of how a module will perform in specific applications. The approach makes use of the weather data profiles that describe conditions throughout the United States and emphasizes performance differences between various module types. An industry-representative Technical Review Committee has been assembled to provide feedback and guidance on the strawman and final approach used in developing the methodology.

  16. Methodology for Selection of Non-Restored Reserved Systems Pertaining to Control of Technological Processes

    Directory of Open Access Journals (Sweden)

    V. A. Anischenko

    2008-01-01

    Full Text Available The paper contains analysis of reliability of non-restored passive reserved systems pertaining to control of technological processes. Criteria have been justified and methodology for optimum selection of reserved systems has been developed.

  17. Coupling new technologies and methodologies for performance improvement.

    Science.gov (United States)

    Monge, Paul

    2007-01-01

    Radiology is a pivotal part of the patient's experience within a healthcare organization and has traditionally embraced new technologies. It is now time to embrace new management methodologies. With the changing winds in reimbursement, activity-based methods (ABC and ABM) will assist us to maximize our resources, reduce costs, and increase our efficiencies to maintain the quality of care. We have embraced new technologies, but we have implemented them on top of old processes. Without embracing new methodologies we may never maximize our new technology.

  18. Towards an MDA-based development methodology

    NARCIS (Netherlands)

    Gavras, Anastasius; Belaunde, Mariano; Ferreira Pires, Luis; Almeida, João Paolo A.; Oquendo, Flavio; Warboys, Brian C.; Morrison, Ron

    2004-01-01

    This paper proposes a development methodology for distributed applications based on the principles and concepts of the Model-Driven Architecture (MDA). The paper identifies phases and activities of an MDA-based development trajectory, and defines the roles and products of each activity in accordance

  19. Towards an MDA-based development methodology

    NARCIS (Netherlands)

    Gavras, Anastasius; Belaunde, Mariano; Ferreira Pires, Luis; Andrade Almeida, João; Oquendo, Flavio; Warboys, Brian C.; Morrison, Ron

    2004-01-01

    This paper proposes a development methodology for distributed applications based on the principles and concepts of the Model-Driven Architecture (MDA). The paper identifies phases and activities of an MDA-based development trajectory, and defines the roles and products of each activity in accordance

  20. The PHM-Ethics methodology: interdisciplinary technology assessment of personal health monitoring.

    Science.gov (United States)

    Schmidt, Silke; Verweij, Marcel

    2013-01-01

    The contribution briefly introduces the PHM Ethics project and the PHM methodology. Within the PHM-Ethics project, a set of tools and modules had been developed that may assist in the evaluation and assessment of new technologies for personal health monitoring, referred to as "PHM methodology" or "PHM toolbox". An overview on this interdisciplinary methodology and its comprising modules is provided, areas of application and intended target groups are indicated.

  1. Developing Digital Interventions: A Methodological Guide

    Directory of Open Access Journals (Sweden)

    Katherine Bradbury

    2014-01-01

    Full Text Available Digital interventions are becoming an increasingly popular method of delivering healthcare as they enable and promote patient self-management. This paper provides a methodological guide to the processes involved in developing effective digital interventions, detailing how to plan and develop such interventions to avoid common pitfalls. It demonstrates the need for mixed qualitative and quantitative methods in order to develop digital interventions which are effective, feasible, and acceptable to users and stakeholders.

  2. From technological acceptability to appropriation by users: methodological steps for device assessment in road safety.

    Science.gov (United States)

    Bordel, Stéphanie; Somat, Alain; Barbeau, Hervé; Anceaux, Françoise; Greffeuille, Catherine; Menguy, Gaëlle; Pacaux, Marie-Pierre; Subirats, Peggy; Terrade, Florence; Gallenne, Marie-Line

    2014-06-01

    This article presents the methodology developed within the framework of the research project SARI (Automated Road Surveillance for Driver and Administrator Information). This methodology is based on the logic of action research. The article presents the different stages in the development of technological innovation addressing vehicle control loss when driving on a curve. The results observed in speed reduction illustrate that no matter how optimal an innovation may be technologically speaking, it is only as effective as it is acceptable from a user standpoint. This acceptability can only be obtained if the technology is developed by engineers in liaison with social science specialists.

  3. Ontology-Based Classification System Development Methodology

    Directory of Open Access Journals (Sweden)

    Grabusts Peter

    2015-12-01

    Full Text Available The aim of the article is to analyse and develop an ontology-based classification system methodology that uses decision tree learning with statement propositionalized attributes. Classical decision tree learning algorithms, as well as decision tree learning with taxonomy and propositionalized attributes have been observed. Thus, domain ontology can be extracted from the data sets and can be used for data classification with the help of a decision tree. The use of ontology methods in decision tree-based classification systems has been researched. Using such methodologies, the classification accuracy in some cases can be improved.

  4. Methodologies and Intelligent Systems for Technology Enhanced Learning

    CERN Document Server

    Gennari, Rosella; Vittorini, Pierpaolo; Prieta, Fernando

    2015-01-01

    This volume presents recent research on Methodologies and Intelligent Systems for Technology Enhanced Learning. It contains the contributions of MIS4TEL 2015, which took place in Salamanca, Spain,. On June 3rd to 5th 2015. Like the previous edition, this proceedings and the conference is an open forum for discussing intelligent systems for Technology Enhanced Learning and empirical methodologies for their design or evaluation MIS4TEL’15 conference has been organized by University of L’aquila, Free University of Bozen-Bolzano and the University of Salamanca.  .

  5. Development of nondestructive testing/evaluation methodology for MEMS

    Science.gov (United States)

    Zunino, James L., III; Skelton, Donald R.; Marinis, Ryan T.; Klempner, Adam R.; Hefti, Peter; Pryputniewicz, Ryszard J.

    2008-02-01

    Development of MEMS constitutes one of the most challenging tasks in today's micromechanics. In addition to design, analysis, and fabrication capabilities, this task also requires advanced test methodologies for determination of functional characteristics of MEMS to enable refinement and optimization of their designs as well as for demonstration of their reliability. Until recently, this characterization was hindered by lack of a readily available methodology. However, using recent advances in photonics, electronics, and computer technology, it was possible to develop a NonDestructive Testing (NDT) methodology suitable for evaluation of MEMS. In this paper, an optoelectronic methodology for NDT of MEMS is described and its application is illustrated with representative examples; this description represents work in progress and the results are preliminary. This methodology provides quantitative full-field-of-view measurements in near real-time with high spatial resolution and nanometer accuracy. By quantitatively characterizing performance of MEMS, under different vibration, thermal, and other operating conditions, specific suggestions for their improvements can be made. Then, using the methodology, we can verify the effects of these improvements. In this way, we can develop better understanding of functional characteristics of MEMS, which will ensure that they are operated at optimum performance, are durable, and are reliable.

  6. Standardized cost estimation for new technology (SCENT) - methodology and tool

    NARCIS (Netherlands)

    Ereev, S.Y.; Patel, M.K.

    2012-01-01

    This paper presents the development of a methodology and tool (called SCENT) to prepare preliminary economic estimates of the total production costs related to manufacturing in the process industries. The methodology uses the factorial approach – cost objects are estimated using factors and

  7. Computer technology -- 1996: Applications and methodology. PVP-Volume 326

    Energy Technology Data Exchange (ETDEWEB)

    Hulbert, G.M. [ed.] [Univ. of Michigan, Ann Arbor, MI (United States); Hsu, K.H. [ed.] [Babcock and Wilcox, Barberton, OH (United States); Lee, T.W. [ed.] [FMC Corp., Santa Clara, CA (United States); Nicholas, T. [ed.] [USAF Wright Laboratory, Wright-Patterson AFB, OH (United States)

    1996-12-01

    The primary objective of the Computer Technology Committee of the ASME Pressure Vessels and Piping Division is to promote interest and technical exchange in the field of computer technology, related to the design and analysis of pressure vessels and piping. The topics included in this volume are: analysis of bolted joints; nonlinear analysis, applications and methodology; finite element analysis and applications; and behavior of materials. Separate abstracts were prepared for 23 of the papers in this volume.

  8. Integrating Product and Technology Development

    DEFF Research Database (Denmark)

    Meijer, Ellen Brilhuis; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

    2016-01-01

    Although dual innovation projects, defined in this article as the concurrent development of products and technologies, often occur in industry, these are only scarcely supported methodologically. Limited research has been done about dual innovation projects and their inherent challenges (e.......g. managing dependencies) and opportunities (e.g. streamlining development). This paper presents five existing reference models for technology development (TD), which were identified via a systematic literature review, where their possible integration with product development (PD) reference models...... was investigated. Based on the specific characteristics desired for dual innovation projects, such as integrated product development and coverage of multiple development stages, a set of selection criteria was employed to select suitable PD and TD reference models. The integration and adaptation of the selected...

  9. IDR: A Participatory Methodology for Interdisciplinary Design in Technology Enhanced Learning

    Science.gov (United States)

    Winters, Niall; Mor, Yishay

    2008-01-01

    One of the important themes that emerged from the CAL'07 conference was the failure of technology to bring about the expected disruptive effect to learning and teaching. We identify one of the causes as an inherent weakness in prevalent development methodologies. While the problem of designing technology for learning is irreducibly…

  10. Graphite technology development plan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1986-07-01

    This document presents the plan for the graphite technology development required to support the design of the 350 MW(t) Modular HTGR within the US National Gas-Cooled Reactor Program. Besides descriptions of the required technology development, cost estimates, and schedules, the plan also includes the associated design functions and design requirements.

  11. Building an Open Data Portal for the European Space Agency Climate Change Initiative based on an Iterative Development Methodology and Linked Data Technologies

    Science.gov (United States)

    Kershaw, P.; Bennett, V. L.; Stephens, A.; Wilson, A.; Waterfall, A. M.; Petrie, R.; Iwi, A.; Donegan, S.; Juckes, M. N.; Parton, G.

    2016-12-01

    The Climate Change Initiative (CCI) programme was initiated by the European Space Agency (ESA) in 2009 to address the GCOS Essential Climate Variable (ECV) requirements to provide stable, long-term, satellite-based data products to characterise the climate system and its changes. CEDA, working as part of a project consortium, were awarded the contract to build the Open Data Portal, consisting collectively of a central archive and single point of access for dissemination of the data to the international user community. Reflecting climate and earth observation community requirements, the system needed to support a range of access services in use by this domain and specifically, to integrate into existing infrastructure in the form of the Earth System Grid Federation (ESGF). This range of requirements together with the heterogeneity of the ECV datasets presented significant challenges. However, the use of Linked Data technologies and an iterative approach to data model development and data publishing have been instrumental in meeting the objectives and building a cohesive system. The portal supports data discovery based on the OGC CSW specification and on ESGF's powerful faceted search. These services provide complementary content at different levels of granularity and it therefore became clear that a common data model was needed. Key terms are defined in vocabularies serialised in SKOS and OWL and are accessible from a central vocabulary server to provide a single authoritative source for applications consuming metadata content. Exploiting the vocabulary service therefore, it has been possible to develop an innovative solution tagging ISO 19115 records for the CSW with the equivalent vocabulary terms used for the ESGF faceted search system. In this way it has been possible to create a rich user interface for the portal combining search results from both search services and the ability to dynamically populate facet selection and context-based help information from the

  12. Suitability of Modern Software Development Methodologies for Model Driven Development

    Directory of Open Access Journals (Sweden)

    Ruben Picek

    2009-12-01

    Full Text Available As an answer to today’s growing challenges in software industry, wide spectrum of new approaches of software development has occurred. One prominent direction is currently most promising software development paradigm called Model Driven Development (MDD. Despite a lot of skepticism and problems, MDD paradigm is being used and improved to accomplish many inherent potential benefits. In the methodological approach of software development it is necessary to use some kind of development process. Modern methodologies can be classified into two main categories: formal or heavyweight and agile or lightweight. But when it is a question about MDD and development process for MDD, currently known methodologies are very poor or better said they don't have any explanation of MDD process. As the result of research, in this paper, author examines the possibilities of using existing modern software methodologies in context of MDD paradigm.

  13. Ontology-Based Classification System Development Methodology

    OpenAIRE

    2015-01-01

    The aim of the article is to analyse and develop an ontology-based classification system methodology that uses decision tree learning with statement propositionalized attributes. Classical decision tree learning algorithms, as well as decision tree learning with taxonomy and propositionalized attributes have been observed. Thus, domain ontology can be extracted from the data sets and can be used for data classification with the help of a decision tree. The use of ontology methods in decision ...

  14. Methodological guidelines for developing accident modification functions

    DEFF Research Database (Denmark)

    Elvik, Rune

    2015-01-01

    This paper proposes methodological guidelines for developing accident modification functions. An accident modification function is a mathematical function describing systematic variation in the effects of road safety measures. The paper describes ten guidelines. An example is given of how to use...... limitations in developing accident modification functions are the small number of good evaluation studies and the often huge variation in estimates of effect. It is therefore still not possible to develop accident modification functions for very many road safety measures. © 2015 Elsevier Ltd. All rights...

  15. Development of Methodologies for Technology Deployment for Advanced Outage Control Centers that Improve Outage Coordination, Problem Resolution and Outage Risk Management

    Energy Technology Data Exchange (ETDEWEB)

    Shawn St. Germain; Ronald Farris; Heather Medeman

    2013-09-01

    This research effort is a part of the Light-Water Reactor Sustainability (LWRS) Program, which is a research and development (R&D) program sponsored by Department of Energy (DOE) and performed in close collaboration with industry R&D programs that provides the technical foundations for licensing and managing the long-term, safe, and economical operation of current nuclear power plants. The LWRS program serves to help the U.S. nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. The long term viability of existing nuclear power plants in the U.S. will depend upon maintaining high capacity factors, avoiding nuclear safety issues and reducing operating costs. The slow progress in the construction on new nuclear power plants has placed in increased importance on maintaining the output of the current fleet of nuclear power plants. Recently expanded natural gas production has placed increased economic pressure on nuclear power plants due to lower cost competition. Until recently, power uprate projects had steadily increased the total output of the U.S. nuclear fleet. Errors made during power plant upgrade projects have now removed three nuclear power plants from the U.S. fleet and economic considerations have caused the permanent shutdown of a fourth plant. Additionally, several utilities have cancelled power uprate projects citing economic concerns. For the past several years net electrical generation from U.S. nuclear power plants has been declining. One of few remaining areas where significant improvements in plant capacity factors can be made is in minimizing the duration of refueling outages. Managing nuclear power plant outages is a complex and difficult task. Due to the large number of complex tasks and the uncertainty that accompanies them, outage durations routinely exceed the planned duration. The ability to complete an outage on or near

  16. Baseline methodologies for clean development mechanism projects

    Energy Technology Data Exchange (ETDEWEB)

    Lee, M.K. (ed.); Shrestha, R.M.; Sharma, S.; Timilsina, G.R.; Kumar, S.

    2005-11-15

    The Kyoto Protocol and the Clean Development Mechanism (CDM) came into force on 16th February 2005 with its ratification by Russia. The increasing momentum of this process is reflected in more than 100 projects having been submitted to the CDM Executive Board (CDM-EB) for approval of the baselines and monitoring methodologies, which is the first step in developing and implementing CDM projects. A CDM project should result in a net decrease of GHG emissions below any level that would have resulted from other activities implemented in the absence of that CDM project. The 'baseline' defines the GHG emissions of activities that would have been implemented in the absence of a CDM project. The baseline methodology is the process/algorithm for establishing that baseline. The baseline, along with the baseline methodology, are thus the most critical element of any CDM project towards meeting the important criteria of CDM, which are that a CDM should result in 'real, measurable, and long term benefits related to the mitigation of climate change'. This guidebook is produced within the frame work of the United Nations Environment Programme (UNEP) facilitated 'Capacity Development for the Clean Development Mechanism (CD4CDM)' Project. This document is published as part of the projects effort to develop guidebooks that cover important issues such as project finance, sustainability impacts, legal framework and institutional framework. These materials are aimed to help stakeholders better understand the CDM and are believed to eventually contribute to maximize the effect of the CDM in achieving the ultimate goal of UNFCCC and its Kyoto Protocol. This Guidebook should be read in conjunction with the information provided in the two other guidebooks entitled, 'Clean Development Mechanism: Introduction to the CDM' and 'CDM Information and Guidebook' developed under the CD4CDM project. (BA)

  17. IT Development: Methodology Overload or Crisis?

    Science.gov (United States)

    Korac-Boisvert, Nada; Kouzmin, Alexander

    1995-01-01

    An examination of the management techniques that underlie the information technology (IT) industry reveals a common strategy of dividing organizational functions into tasks in a "top-down" fashion. The research and development approach is recommended for design-in-action development and an open-ended IT strategy to facilitate an…

  18. Methodologies for local development in smart society

    Directory of Open Access Journals (Sweden)

    Lorena BĂTĂGAN

    2012-07-01

    Full Text Available All of digital devices which are connected through the Internet, are producing a big quantity of data. All this information can be turned into knowledge because we now have the computational power and solutions for advanced analytics to make sense of it. With this knowledge, cities could reduce costs, cut waste, and improve efficiency, productivity and quality of life for their citizens. The efficient/smart cities are characterized by more importance given to environment, resources, globalization and sustainable development. This paper represents a study on the methodologies for urban development that become the central element to our society.

  19. Advanced Mirror Technology Development

    Science.gov (United States)

    Stahl, H. Philip

    2017-01-01

    The Advanced Mirror Technology Development (AMTD) project matures critical technologies required to enable ultra-stable 4-m-or-larger monolithic or segmented ultraviolet, optical, and infrared (UVOIR) space telescope primary-mirror assemblies for general astrophysics and ultra-high-contrast observations of exoplanets.

  20. Epistemological and Methodological Issues for the Conceptualization, Development, and Assessment of ICT-TPCK: Advances in Technological Pedagogical Content Knowledge (TPCK)

    Science.gov (United States)

    Angeli, Charoula; Valanides, Nicos

    2009-01-01

    In this paper, several issues regarding the epistemology of technological pedagogical content knowledge (TPCK) are first raised for the purpose of clarifying the construct. Specifically, the transformative and integrative views are juxtaposed for exploring the epistemology of TPCK, and, at the end, the transformative view is adopted concluding…

  1. Ocean Technology Development Tank

    Data.gov (United States)

    Federal Laboratory Consortium — The new SWFSC laboratory in La Jolla incorporates a large sea- and fresh-water Ocean Technology Development Tank. This world-class facility expands NOAA's ability to...

  2. A methodology for evaluating ``new`` technologies in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Korsah, K.; Clark, R.L.; Holcomb, D.E.

    1994-06-01

    As obsolescence and spare parts issues drive nuclear power plants to upgrade with new technology (such as optical fiber communication systems), the ability of the new technology to withstand stressors present where it is installed needs to be determined. In particular, new standards may be required to address qualification criteria and their application to the nuclear power plants of tomorrow. This paper discusses the failure modes and age-related degradation mechanisms of fiber optic communication systems, and suggests a methodology for identifying when accelerated aging should be performed during qualification testing.

  3. Cleaner technology development--some practical steps for developing countries.

    Science.gov (United States)

    Rathi, A K A; Bhanujan, K V

    2004-10-01

    Cleaner technologies often originate from developed countries. Little developmental work is continued on the products sourced from developing countries. These products are by and large low value products generating large quantities of hazardous waste per unit of production. Methodology is proposed for phasing out such dirty technologies! products. The development of cleaner technologies is proposed for utilizing large quantity of hazardous waste generated from identified manufacturing process.

  4. Technology development for safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ho Dong; Kang, H. Y.; Song, D. Y. [and others

    2005-04-01

    The objective of this project are to establish the safeguards technology of the nuclear proliferation resistance to the facilities which handle with high radioactivity nuclear materials like the spent fuel, to provide the foundation of the technical independency for the establishment of the effective management of domestic spent fuels, and to construct the base of the early introduction of the key technology relating to the back-end nuclear fuel cycle through the development of the safeguards technology of the DFDF of the nuclear non-proliferation. The essential safeguards technologies of the facility such as the measurement and account of nuclear materials and the C/S technology were carried out in this stage (2002-2004). The principal results of this research are the development of error reduction technology of the NDA equipment and a new NDA system for the holdup measurement of process materials, the development of the intelligent surveillance system based on the COM, the evaluation of the safeguardability of the Pyroprocessing facility which is the core process of the nuclear fuel cycle, the derivation of the research and development items which are necessary to satisfy the safeguards criteria of IAEA, and the presentation of the direction of the technology development relating to the future safeguards of Korea. This project is the representative research project in the field of the Korea's safeguards. The safeguards technology and equipment developed while accomplishing this project can be applied to other nuclear fuel cycle facilities as well as DFDF and will be contributed to increase the international confidence in the development of the nuclear fuel cycle facility of Korea and its nuclear transparency.

  5. Innovative methodologies and technologies for thermal energy release measurement.

    Science.gov (United States)

    Marotta, Enrica; Peluso, Rosario; Avino, Rosario; Belviso, Pasquale; Caliro, Stefano; Carandente, Antonio; Chiodini, Giovanni; Mangiacapra, Annarita; Petrillo, Zaccaria; Sansivero, Fabio; Vilardo, Giuseppe; Marfe, Barbara

    2016-04-01

    Volcanoes exchange heat, gases and other fluids between the interrior of the Earth and its atmosphere influencing processes both at the surface and above it. This work is devoted to improve the knowledge on the parameters that control the anomalies in heat flux and chemical species emissions associated with the diffuse degassing processes of volcanic and hydrothermal zones. We are studying and developing innovative medium range remote sensing technologies to measure the variations through time of heat flux and chemical emissions in order to boost the definition of the activity state of a volcano and allowing a better assessment of the related hazard and risk mitigation. The current methodologies used to measure heat flux (i.e. CO2 flux or temperature gradient) are either poorly efficient or effective, and are unable to detect short to medium time (days to months) variation trends in the heat flux. Remote sensing of these parameters will allow for measurements faster than already accredited methods therefore it will be both more effective and efficient in case of emergency and it will be used to make quick routine monitoring. We are currently developing a method based on drone-born IR cameras to measure the ground surface temperature that, in a purely conductive regime, is directly correlated to the shallow temperature gradient. The use of flying drones will allow to quickly obtain a mapping of areas with thermal anomalies and a measure of their temperature at distance in the order of hundreds of meters. Further development of remote sensing will be done through the use, on flying drones, of multispectral and/or iperspectral sensors, UV scanners in order to be able to detect the amount of chemical species released in the athmosphere.

  6. Wind energy technology developments

    DEFF Research Database (Denmark)

    Madsen, Peter Hauge; Hansen, Morten Hartvig; Pedersen, Niels Leergaard

    2014-01-01

    turbine blades and towers are very large series-produced components, which costs and quality are strongly dependent on the manufacturing methods. The industrial wind energy sector is well developed in Denmark, and the competitive advantage of the Danish sector and the potential for job creation......This chapter describes the present mainstream development of the wind turbine technology at present. The turbine technology development trend is characterized by up-scaling to turbines with larger capacity for both onshore and offshore applications, larger rotors and new drivetrain solution......, including the direct-drive solution without gearbox. The technology solutions are strongly influenced by the development of the international industry with a global market for components and a trend towards a “shared” development effort in collaboration between the OEM’s and component sub-suppliers. Wind...

  7. Development of a Teaching Methodology for Undergraduate Human Development in Psychology

    Science.gov (United States)

    Rodriguez, Maria A.; Espinoza, José M.

    2015-01-01

    The development of a teaching methodology for the undergraduate Psychology course Human Development II in a private university in Lima, Peru is described. The theoretical framework consisted of an integration of Citizen Science and Service Learning, with the application of Information and Communications Technology (ICT), specifically Wikipedia and…

  8. Demand Activated Manufacturing Architecture (DAMA) supply chain collaboration development methodology

    Energy Technology Data Exchange (ETDEWEB)

    PETERSEN,MARJORIE B.; CHAPMAN,LEON D.

    2000-03-15

    The Demand Activated Manufacturing Architecture (DAMA) project during the last five years of work with the U.S. Integrated Textile Complex (retail, apparel, textile, and fiber sectors) has developed an inter-enterprise supply chain collaboration development methodology. The goal of this methodology is to enable a supply chain to work more efficiently and competitively. The outcomes of this methodology include: (1) A definitive description and evaluation of the role of business cultures and supporting business organizational structures in either inhibiting or fostering change to a more competitive supply chain; (2) ``As-Is'' and proposed ``To-Be'' supply chain business process models focusing on information flows and decision-making; and (3) Software tools that enable and support a transition to a more competitive supply chain, which results form a business driven rather than technologically driven approach to software design. This methodology development will continue in FY00 as DAMA engages companies in the soft goods industry in supply chain research and implementation of supply chain collaboration.

  9. Demand Activated Manufacturing Architecture (DAMA) supply chain collaboration development methodology

    Energy Technology Data Exchange (ETDEWEB)

    PETERSEN,MARJORIE B.; CHAPMAN,LEON D.

    2000-03-15

    The Demand Activated Manufacturing Architecture (DAMA) project during the last five years of work with the U.S. Integrated Textile Complex (retail, apparel, textile, and fiber sectors) has developed an inter-enterprise supply chain collaboration development methodology. The goal of this methodology is to enable a supply chain to work more efficiently and competitively. The outcomes of this methodology include: (1) A definitive description and evaluation of the role of business cultures and supporting business organizational structures in either inhibiting or fostering change to a more competitive supply chain; (2) ``As-Is'' and proposed ``To-Be'' supply chain business process models focusing on information flows and decision-making; and (3) Software tools that enable and support a transition to a more competitive supply chain, which results form a business driven rather than technologically driven approach to software design. This methodology development will continue in FY00 as DAMA engages companies in the soft goods industry in supply chain research and implementation of supply chain collaboration.

  10. GPS Technology and Human Psychological Research: A Methodological Proposal

    Directory of Open Access Journals (Sweden)

    Pedro S. A. Wolf

    2010-10-01

    Full Text Available Animal behaviorists have made extensive use of GPS technology since 1991. In contrast, psychological research has made little use of the technology, even though the technology is relatively inexpensive, familiar, and widespread. Hence, its potential for pure and applied psychological research remains untapped. We describe three methods psychologists could apply to individual differences research, clinical research, or spatial use research. In the context of individual differences research, GPS technology permits us to test hypotheses predicting specific relations among patterns of spatial use and individual differences variables. In a clinical context, GPS technology provides outcome measures that may relate to the outcome of interventions designed to treat psychological disorders that, for example, may leave a person homebound (e.g. Agoraphobia, PTSD, TBI. Finally, GPS technology provides natural measures of spatial use. We, for example, used GPS technology to quantify traffic flow and exhibit use at the Arizona Sonora Desert Museum. Interested parties could easily extend this methodology some aspects of urban planning or business usage.DOI: 10.2458/azu_jmmss.v1i1.74

  11. GPR Technologies and Methodologies in Italy: A Review

    Science.gov (United States)

    Benedetto, Andrea; Frezza, Fabrizio; Manacorda, Guido; Massa, Andrea; Pajewski, Lara

    2014-05-01

    GPR techniques and technologies have been subject of intense research activities at the Italian level in the last 15 years because of their potential applications specifically to civil engineering. More in detail, several innovative approaches and models have been developed to inspect road pavements to measure the thickness of their layers as well as to diagnose or prevent damage. Moreover, new frontiers in bridge inspection as well as in geotechnical applications such as slides and flows have been investigated using GPR. From the methodological viewpoint, innovative techniques have been developed to solve GPR forward-scattering problems, as well to locate and classify subsurface targets in real-time and to retrieve their properties through multi-resolution strategies, and linear and non-linear methodologies. Furthermore, the application of GPR and other non-destructive testing methods in archaeological prospecting, cultural heritage diagnostics, and in the localization and detection of vital signs of trapped people has been widely investigated. More recently, new theoretical and empirical paradigms regarding water moisture evaluation in various porous media and soil characterization have been published as the results of long terms research activities. Pioneer studies are also currently under development with the scope to correlate GPR measurement with mechanical characteristics of bound and unbound construction materials. In such a framework, this abstract will be aimed at reviewing some of the most recent advances of GPR techniques and technologies within the Italian industrial and academic communities [also including their application within international projects such as FP7 ISTIMES (http://www.istimes.eu)], and at envisaging some of the most promising research trends currently under development. Acknowledgment - This work was supported by COST Action TU1208 'Civil Engineering Applications of Ground Penetrating Radar' References [1] M. Balsi, S. Esposito, F

  12. Insider protection technology developments

    Energy Technology Data Exchange (ETDEWEB)

    Foesch, J.; Bortniak, P.; Waddoups, I.

    1994-08-01

    Sandia National Laboratories evaluates and develops new techniques and technologies to ensure the integrity of special nuclear material (SNM) against potential insider threats. We have evaluated several types of sensor technologies and subsystems to monitor and/or track materials and personnel. This past year`s effort has been directed at characterizing commercial developments that meet the Department of Energy`s (DOE) needs in some of these areas. Some of these evaluations are complete and some are still in progress. This paper discusses our work with infrared light (IR), radio frequency (RF), and RF proximity technologies. After these technologies are judged to be applicable to DOE`s needs, we incorporate them into the generic, real time, personnel tracking and material monitoring system.

  13. Mobile Router Technology Development

    Science.gov (United States)

    Ivancic, William D.; Stewart, David H.; Bell, Terry L.; Kachmar, Brian A.; Shell, Dan; Leung, Kent

    2002-01-01

    Cisco Systems and NASA have been performing joint research on mobile routing technology under a NASA Space Act Agreement. Cisco developed mobile router technology and provided that technology to NASA for applications to aeronautic and space-based missions. NASA has performed stringent performance testing of the mobile router, including the interaction of routing and transport-level protocols. This paper describes mobile routing, the mobile router, and some key configuration parameters. In addition, the paper describes the mobile routing test network and test results documenting the performance of transport protocols in dynamic routing environments.

  14. A Review of Roads Data Development Methodologies

    Directory of Open Access Journals (Sweden)

    Taro Ubukawa

    2014-05-01

    Full Text Available There is a clear need for a public domain data set of road networks with high special accuracy and global coverage for a range of applications. The Global Roads Open Access Data Set (gROADS, version 1, is a first step in that direction. gROADS relies on data from a wide range of sources and was developed using a range of methods. Traditionally, map development was highly centralized and controlled by government agencies due to the high cost or required expertise and technology. In the past decade, however, high resolution satellite imagery and global positioning system (GPS technologies have come into wide use, and there has been significant innovation in web services, such that a number of new methods to develop geospatial information have emerged, including automated and semi-automated road extraction from satellite/aerial imagery and crowdsourcing. In this paper we review the data sources, methods, and pros and cons of a range of road data development methods: heads-up digitizing, automated/semi-automated extraction from remote sensing imagery, GPS technology, crowdsourcing, and compiling existing data sets. We also consider the implications for each method in the production of open data.

  15. Certification Testing Methodology for Composite Structure. Volume 2. Methodology Development

    Science.gov (United States)

    1986-10-01

    J.E., "F-18 Composites Development Tests," N00019- 79-C-0044 (January 1981). 3. Stenberg , K.V., et al., "YAV-8B Composite Wing Development," Volumes I...Louis, MO 63166 (Attn: K. Stenberg , R. Garrett, R. Riley, J. Doerr). . . 4 MCDONNELL-DOUGLAS CORP., Long Beach, CA 90846 (Attn: J. Palmer

  16. A methodology for development of biocatalytic processes

    DEFF Research Database (Denmark)

    Lima Ramos, Joana

    in process development is selecting between different process alternatives. The development effort for a novel process is considerable and thus, an increasing number of conceptual process design methods are now applied in chemical industries. Since the natural environment of the biocatalyst is often very...... interpretable results to enable rational design choices of different available process technologies. In the particular case of the asymmetric synthesis of chiral amines, the reaction constraints (thermodynamic equilibrium) must be solved prior to implementation and these fix the hard boundaries of the operating......The potential advantages displayed by biocatalytic processes for organic synthesis (such as exquisite selectivity under mild operating conditions), have prompted the increasing number of processes running on a commercial scale. However, biocatalysis is still a fairly underutilised technology...

  17. Coal resources available for development; a methodology and pilot study

    Science.gov (United States)

    Eggleston, Jane R.; Carter, M. Devereux; Cobb, James C.

    1990-01-01

    Coal accounts for a major portion of our Nation's energy supply in projections for the future. A demonstrated reserve base of more than 475 billion short tons, as the Department of Energy currently estimates, indicates that, on the basis of today's rate of consumption, the United States has enough coal to meet projected energy needs for almost 200 years. However, the traditional procedures used for estimating the demonstrated reserve base do not account for many environmental and technological restrictions placed on coal mining. A new methodology has been developed to determine the quantity of coal that might actually be available for mining under current and foreseeable conditions. This methodology is unique in its approach, because it applies restrictions to the coal resource before it is mined. Previous methodologies incorporated restrictions into the recovery factor (a percentage), which was then globally applied to the reserve (minable coal) tonnage to derive a recoverable coal tonnage. None of the previous methodologies define the restrictions and their area and amount of impact specifically. Because these restrictions and their impacts are defined in this new methodology, it is possible to achieve more accurate and specific assessments of available resources. This methodology has been tested in a cooperative project between the U.S. Geological Survey and the Kentucky Geological Survey on the Matewan 7.5-minute quadrangle in eastern Kentucky. Pertinent geologic, mining, land-use, and technological data were collected, assimilated, and plotted. The National Coal Resources Data System was used as the repository for data, and its geographic information system software was applied to these data to eliminate restricted coal and quantify that which is available for mining. This methodology does not consider recovery factors or the economic factors that would be considered by a company before mining. Results of the pilot study indicate that, of the estimated

  18. Constructive Technology Assessment for HIT development

    DEFF Research Database (Denmark)

    Høstgaard, Anna Marie Balling; Bertelsen, Pernille; Petersen, Lone Stub

    2013-01-01

    Experience and time has shown a need for new evaluation methods for evaluating Health Information Technology (HIT), as summative evaluation methods fail to accommodate the rapid and constant changes in HIT over time and to involve end-users, which has been recognized as an important success factor...... in HIT development. A new evaluation methodology, including an analytical framework, has been developed specifically for HIT development: Constructive Technology Assessment (CTA) for HIT. It offers solutions to both the problems associated with summative technology evaluation and a way to involve end......-users. The CTA methodology is based on a Socio-technical understanding of technological development as an open ended, emergent process. The CTA was used during the EHR development process in the Region of North Jutland where it proved successful inproviding learning and feedback between all relevant groups...

  19. Fusion development and technology

    Energy Technology Data Exchange (ETDEWEB)

    Montgomery, D.B.

    1992-01-01

    This report discusses the following: superconducting magnet technology; high field superconductors; advanced magnetic system and divertor development; poloidal field coils; gyrotron development; commercial reactor studies--aries; ITER physics: alpha physics and alcator R D for ITER; lower hybrid current drive and heating in the ITER device; ITER superconducting PF scenario and magnet analysis; ITER systems studies; and safety, environmental and economic factors in fusion development.

  20. Developing the Business Model – a Methodology for Virtual Enterprises

    DEFF Research Database (Denmark)

    Tølle, Martin; Vesterager, Johan

    2003-01-01

    This chapter presents a methodology to develop Virtual Enterprises (VEs). This Virtual Enterprise Methodology (VEM) outlines activities to consider when setting up and managing virtual enterprises. As a methodology the VEM helps companies to ask the right questions when preparing for, and setting...... and Methodology ISO15704:2000)....

  1. Technology maturity and technology development

    Energy Technology Data Exchange (ETDEWEB)

    Underhill, Gary K.; Carlson, Ronald A.; Clendinning, William A.; Erdos, Jozsef; Gault, John; Hall, James W.; Jones, Robert L.; Michael, Herbert K.; Powell, Paul H.; Riemann, Carl F.; Rios-Castellon, Lorenzo; Shepherd, Burchard P.; Wilson, John S.

    1976-01-01

    All of the work reported in the preceding chapters was performed in order to assess the technical, economic, and energetic feasibility of proceeding with more detailed studies of the geopressured geothermal resource. The preliminary conceptual design and costing activities represented the prime activity for component by component review of the maturity of the technology available for resource utilization facilities. The economics and energetics studies focussed attentions on the areas of major capital and energy investment; these results comprise a useful guide for focussing design in order to reduce initial and operations and maintenance costs and/or investment. The following presents a discussion of the primary technical problems identified.

  2. Remediation Technology Collaboration Development

    Science.gov (United States)

    Mahoney, John; Olsen, Wade

    2010-01-01

    This slide presentation reviews programs at NASA aimed at development at Remediation Technology development for removal of environmental pollutants from NASA sites. This is challenging because there are many sites with different environments, and various jurisdictions and regulations. There are also multiple contaminants. There must be different approaches based on location and type of contamination. There are other challenges: such as costs, increased need for resources and the amount of resources available, and a regulatory environment that is increasing.

  3. Development and Application of Universal Formability Technology

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Using mathematical plasticity theories, universal formability (UF) technology has been developed and applied in the automotive stamping engineering and production. As a formability analysis tool, this technology is the major methodology for the development of stamping expert system (solution provider) for (a) product design and feasibility analysis, (b) material automatic selection using nomograms, (c) draw die design using pre-models, and (d) UF and robustness analysis of die performance in finite element analysis (FEA) environment.

  4. Forecasting and Technology Management: Statistical Theory and Methodological Issues

    DEFF Research Database (Denmark)

    Madsen, Henning

    technology. The conclusion is that widespread awareness of the growing force of technology and increasing concern over its impact means that forecasting of technological development and consequences is absolutely essential in many managerial decision situations. Examples cover e.g. identification...... of directions and targets for a R and D project, monitoring of a given area by a public agency, and evaluation of the future competitive situation for a company. This paper gives a brief introduction to the field of technological forecasting especially in relation to the strategic planning process...... as the essential phase where decisions concerning introduction of new technology are taken in companies. It includes as well a description of the problems related to the marketing area and of methods applicable in practising technological forecasting....

  5. ABC Technology Development Program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-10-14

    The Accelerator-Based Conversion (ABC) facility will be designed to accomplish the following mission: `Provide a weapon`s grade plutonium disposition capability in a safe, economical, and environmentally sound manner on a prudent schedule for [50] tons of weapon`s grade plutonium to be disposed on in [20] years.` This mission is supported by four major objectives: provide a reliable plutonium disposition capability within the next [15] years; provide a level of safety and of safety assurance that meets or exceeds that afforded to the public by modern commercial nuclear power plants; meet or exceed all applicable federal, state, and local regulations or standards for environmental compliance; manage the program in a cost effective manner. The ABC Technology Development Program defines the technology development activities that are required to accomplish this mission. The technology development tasks are related to the following topics: blanket system; vessel systems; reactivity control systems; heat transport system components; energy conversion systems; shutdown heat transport systems components; auxiliary systems; technology demonstrations - large scale experiments.

  6. The Methodology for Ontology Development in Lesson Plan Domain

    Directory of Open Access Journals (Sweden)

    Aslina Saad

    2016-04-01

    Full Text Available Ontology has been recognized as a knowledge representation mechanism that supports a semantic web application. The semantic web application that supports lesson plan construction is crucial for teachers to deal with the massive information sources from various domains on the web. Thus, knowledge in lesson plan domain needs to be represented accordingly so that the search on the web will retrieve relevant materials only. Essentially, such retrieval needs an appropriate representation of the domain problem. The emergence of semantic web technology provides a promising solution to improve the representation, sharing, and re-use of information to support decision making. Thus, the knowledge of lesson plan domain needs to be represented ontologically to support efficient retrieval of semantic web application in the domain of lesson plan. This paper presents a new methodology for ontology development representation of lesson plan domain to support semantic web application. The methodology is focused on the important model, tools, and techniques in each phase of the development. The methodology consists of four phases, namely requirements analysis, development, implementation, evaluation and maintenance.

  7. Transmutation Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Song, T. Y.; Park, W. S.; Kim, Y. H. (and others)

    2007-06-15

    The spent fuel coming from the PWR is one of the most difficult problems to be solved for the continuous use of nuclear power. It takes a few million years to be safe under the ground. Therefore, it is not easy to take care of the spent fuel for such a long time. Transmutation technology is the key technology which can solve the spent fuel problem basically. Transmutation is to transmute long-lived radioactive nuclides in the spent fuel into short-lived or stable nuclide through nuclear reactions. The long-lived radioactive nuclides can be TRU and fission products such as Tc-99 and I-129. Although the transmutation technology does not make the underground disposal totally unnecessary, the period to take care of the spent fuel can be reduced to the order of a few hundred years. In addition to the environmental benefit, transmutation can be considered to recycle the energy in the spent fuel since the transmutation is performed through nuclear fission reaction of the TRU in the spent fuel. Therefore, transmutation technology is worth being developed in economical aspect. The results of this work can be a basis for the next stage research. The objective of the third stage research was to complete the core conceptual design and verification of the key technologies. The final results will contribute to the establishment of Korean back end fuel cycle policy by providing technical guidelines.

  8. Textile technology development

    Science.gov (United States)

    Shah, Bharat M.

    1995-01-01

    The objectives of this report were to evaluate and select resin systems for Resin Transfer Molding (RTM) and Powder Towpreg Material, to develop and evaluate advanced textile processes by comparing 2-D and 3-D braiding for fuselage frame applications and develop window belt and side panel structural design concepts, to evaluate textile material properties, and to develop low cost manufacturing and tooling processes for the automated manufacturing of fuselage primary structures. This research was in support of the NASA and Langley Research Center (LaRc) Advanced Composite Structural Concepts and Materials Technologies for Primary Aircraft Structures program.

  9. Graphite Technology Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    W. Windes; T. Burchell; R. Bratton

    2007-09-01

    This technology development plan is designed to provide a clear understanding of the research and development direction necessary for the qualification of nuclear grade graphite for use within the Next Generation Nuclear Plant (NGNP) reactor. The NGNP will be a helium gas cooled Very High Temperature Reactor (VHTR) with a large graphite core. Graphite physically contains the fuel and comprises the majority of the core volume. Considerable effort will be required to ensure that the graphite performance is not compromised during operation. Based upon the perceived requirements the major data needs are outlined and justified from the perspective of reactor design, reatcor performance, or the reactor safety case. The path forward for technology development can then be easily determined for each data need. How the data will be obtained and the inter-relationships between the experimental and modeling activities will define the technology development for graphite R&D. Finally, the variables affecting this R&D program are discussed from a general perspective. Factors that can significantly affect the R&D program such as funding, schedules, available resources, multiple reactor designs, and graphite acquisition are analyzed.

  10. ECH Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Temkin, Richard [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2014-12-24

    Electron Cyclotron Heating (ECH) is needed for plasma heating, current drive, plasma stability control, and other applications in fusion energy sciences research. The program of fusion energy sciences supported by U. S. DOE, Office of Science, Fusion Energy Sciences relies on the development of ECH technology to meet the needs of several plasma devices working at the frontier of fusion energy sciences research. The largest operating ECH system in the world is at DIII-D, consisting of six 1 MW, 110 GHz gyrotrons capable of ten second pulsed operation, plus two newer gyrotrons. The ECH Technology Development research program investigated the options for upgrading the DIII-D 110 GHz ECH system. Options included extending present-day 1 MW technology to 1.3 – 1.5 MW power levels or developing an entirely new approach to achieve up to 2 MW of power per gyrotron. The research consisted of theoretical research and designs conducted by Communication and Power Industries of Palo Alto, CA working with MIT. Results of the study would be validated in a later phase by research on short pulse length gyrotrons at MIT and long pulse / cw gyrotrons in industry. This research follows a highly successful program of development that has led to the highly reliable, six megawatt ECH system at the DIII-D tokamak. Eventually, gyrotrons at the 1.5 megawatt to multi-megawatt power level will be needed for heating and current drive in large scale plasmas including ITER and DEMO.

  11. Combining Ontology Development Methodologies and Semantic Web Platforms for E-government Domain Ontology Development

    CERN Document Server

    Dombeu, Jean Vincent Fonou; 10.5121/ijwest.2011.2202

    2011-01-01

    One of the key challenges in electronic government (e-government) is the development of systems that can be easily integrated and interoperated to provide seamless services delivery to citizens. In recent years, Semantic Web technologies based on ontology have emerged as promising solutions to the above engineering problems. However, current research practicing semantic development in e-government does not focus on the application of available methodologies and platforms for developing government domain ontologies. Furthermore, only a few of these researches provide detailed guidelines for developing semantic ontology models from a government service domain. This research presents a case study combining an ontology building methodology and two state-of-the-art Semantic Web platforms namely Protege and Java Jena ontology API for semantic ontology development in e-government. Firstly, a framework adopted from the Uschold and King ontology building methodology is employed to build a domain ontology describing th...

  12. A methodology for spacecraft technology insertion analysis balancing benefit, cost, and risk

    Science.gov (United States)

    Bearden, David Allen

    Emerging technologies are changing the way space missions are developed and implemented. Technology development programs are proceeding with the goal of enhancing spacecraft performance and reducing mass and cost. However, it is often the case that technology insertion assessment activities, in the interest of maximizing performance and/or mass reduction, do not consider synergistic system-level effects. Furthermore, even though technical risks are often identified as a large cost and schedule driver, many design processes ignore effects of cost and schedule uncertainty. This research is based on the hypothesis that technology selection is a problem of balancing interrelated (and potentially competing) objectives. Current spacecraft technology selection approaches are summarized, and a Methodology for Evaluating and Ranking Insertion of Technology (MERIT) that expands on these practices to attack otherwise unsolved problems is demonstrated. MERIT combines the modern techniques of technology maturity measures, parametric models, genetic algorithms, and risk assessment (cost and schedule) in a unique manner to resolve very difficult issues including: user-generated uncertainty, relationships between cost/schedule and complexity, and technology "portfolio" management. While the methodology is sufficiently generic that it may in theory be applied to a number of technology insertion problems, this research focuses on application to the specific case of small (goals, not-to-exceed costs, or hard schedule requirements. MERIT'S contributions to the engineering community are its: unique coupling of the aspects of performance, cost, and schedule; assessment of system level impacts of technology insertion; procedures for estimating uncertainties (risks) associated with advanced technology; and application of heuristics to facilitate informed system-level technology utilization decisions earlier in the conceptual design phase. MERIT extends the state of the art in technology

  13. 7th International Conference in Methodologies and Intelligent Systems for Technology Enhanced Learning

    CERN Document Server

    Gennari, Rosella; Mascio, Tania; Rodríguez, Sara; Prieta, Fernando; Ramos, Carlos; Silveira, Ricardo

    2017-01-01

    This book presents the outcomes of the 7th International Conference in Methodologies and Intelligent Systems for Technology Enhanced Learning (MIS4TEL'17), hosted by the Polytechnic of Porto, Portugal from 21 to 23 June 2017. Expanding on the topics of the previous conferences, it provided an open forum for discussing intelligent systems for technology enhanced learning (TEL) and their roots in novel learning theories, empirical methodologies for their design or evaluation, stand-alone and web-based solutions, and makerspaces. It also fostered entrepreneurship and business startup ideas, bringing together researchers and developers from industry, education and the academic world to report on the latest scientific research, technical advances and methodologies.

  14. Survey and analysis of federally developed technology

    Energy Technology Data Exchange (ETDEWEB)

    Reed, J.E.; Conrad, J.L.

    1983-02-01

    The methodology and results of a test effort to determine whether there exist unexpected opportunities for the direct transfer of technologies from federal laboratories to industry are presented. Specifically, the latest results of six federal laboratories with potential application in the pulp and paper industry, particularly those results applicable to improving energy productivity, were evaluated, cataloged, and distributed to industry representatives to gauge their reaction. The principal methodological steps in this effort were the development of a taxonomy of the pulp and paper industry, identification of industry needs and laboratory capabilities, laboratory visits, review of technology findings with industry, and evaluation and compilation of industry responses.

  15. Survey and analysis of federally developed technology

    Energy Technology Data Exchange (ETDEWEB)

    Reed, J.E.; Conrad, J.L.

    1983-02-01

    The methodology and results of a test effort to determine whether there exist unexpected opportunities for the direct transfer of technologies from federal laboratories to industry are presented. Specifically, the latest results of six federal laboratories with potential application in the pulp and paper industry, particularly those results applicable to improving energy productivity, were evaluated, cataloged, and distributed to industry representatives to gauge their reaction. The principal methodological steps in this effort were the development of a taxonomy of the pulp and paper industry, identification of industry needs and laboratory capabilities, laboratory visits, review of technology findings with industry, and evaluation and compilation of industry responses.

  16. Photogrammetry Methodology Development for Gossamer Spacecraft Structures

    Science.gov (United States)

    Pappa, Richard S.; Jones, Thomas W.; Black, Jonathan T.; Walford, Alan; Robson, Stuart; Shortis, Mark R.

    2002-01-01

    Photogrammetry--the science of calculating 3D object coordinates from images--is a flexible and robust approach for measuring the static and dynamic characteristics of future ultra-lightweight and inflatable space structures (a.k.a., Gossamer structures), such as large membrane reflectors, solar sails, and thin-film solar arrays. Shape and dynamic measurements are required to validate new structural modeling techniques and corresponding analytical models for these unconventional systems. This paper summarizes experiences at NASA Langley Research Center over the past three years to develop or adapt photogrammetry methods for the specific problem of measuring Gossamer space structures. Turnkey industrial photogrammetry systems were not considered a cost-effective choice for this basic research effort because of their high purchase and maintenance costs. Instead, this research uses mainly off-the-shelf digital-camera and software technologies that are affordable to most organizations and provide acceptable accuracy.

  17. Methodological principles outline discipline "Organization studies-tourism activity" using information technologies.

    Directory of Open Access Journals (Sweden)

    Kozina Zh.L.

    2011-08-01

    Full Text Available The basic methodological principles of the disciplines of tourism and local history with information technology. 15 analyzed the literature and experience of leading experts in the field of sports and health tourism, and orienteering. Identified principles of academic disciplines of tourism and local history: the shift in emphasis from sports tourism to the cognitive, health tourism, the development of spiritual qualities, acquisition of life skills in nature, discovery and development of pedagogical and psychological abilities, character traits through the study of native land, the development of cognitive-research abilities, physical abilities, motor skills, application of modern information technology.

  18. FY-95 technology catalog. Technology development for buried waste remediation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    The US Department of Energy`s (DOE) Buried Waste Integrated Demonstration (BWID) program, which is now part of the Landfill Stabilization Focus Area (LSFA), supports applied research, development, demonstration, and evaluation of a multitude of advanced technologies dealing with underground radioactive and hazardous waste remediation. These innovative technologies are being developed as part of integrated comprehensive remediation systems for the effective and efficient remediation of buried waste sites throughout the DOE complex. These efforts are identified and coordinated in support of Environmental Restoration (EM-40) and Waste Management (EM-30) needs and objectives. Sponsored by the DOE Office of Technology Development (EM-50), BWID and LSFA work with universities and private industry to develop technologies that are being transferred to the private sector for use nationally and internationally. This report contains the details of the purpose, logic, and methodology used to develop and demonstrate DOE buried waste remediation technologies. It also provides a catalog of technologies and capabilities with development status for potential users. Past FY-92 through FY-94 technology testing, field trials, and demonstrations are summarized. Continuing and new FY-95 technology demonstrations also are described.

  19. Development of a Novel Gas Pressurized Process-Based Technology for CO2 Capture from Post-Combustion Flue Gases Preliminary Year 1 Techno-Economic Study Results and Methodology for Gas Pressurized Stripping Process

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Shiaoguo

    2013-03-01

    Under the DOE’s Innovations for Existing Plants (IEP) Program, Carbon Capture Scientific, LLC (CCS) is developing a novel gas pressurized stripping (GPS) process to enable efficient post-combustion carbon capture (PCC) from coal-fired power plants. A technology and economic feasibility study is required as a deliverable in the project Statement of Project Objectives. This study analyzes a fully integrated pulverized coal power plant equipped with GPS technology for PCC, and is carried out, to the maximum extent possible, in accordance to the methodology and data provided in ATTACHMENT 3 – Basis for Technology Feasibility Study of DOE Funding Opportunity Number: DE-FOA-0000403. The DOE/NETL report on “Cost and Performance Baseline for Fossil Energy Plants, Volume 1: Bituminous Coal and Natural Gas to Electricity (Original Issue Date, May 2007), NETL Report No. DOE/NETL-2007/1281, Revision 1, August 2007” was used as the main source of reference to be followed, as per the guidelines of ATTACHMENT 3 of DE-FOA-0000403. The DOE/NETL-2007/1281 study compared the feasibility of various combinations of power plant/CO2 capture process arrangements. The report contained a comprehensive set of design basis and economic evaluation assumptions and criteria, which are used as the main reference points for the purpose of this study. Specifically, Nexant adopted the design and economic evaluation basis from Case 12 of the above-mentioned DOE/NETL report. This case corresponds to a nominal 550 MWe (net), supercritical greenfield PC plant that utilizes an advanced MEAbased absorption system for CO2 capture and compression. For this techno-economic study, CCS’ GPS process replaces the MEA-based CO2 absorption system used in the original case. The objective of this study is to assess the performance of a full-scale GPS-based PCC design that is integrated with a supercritical PC plant similar to Case 12 of the DOE/NETL report, such that it corresponds to a nominal 550 MWe

  20. Forecasting and Technology Management: Statistical Theory and Methodological Issues

    DEFF Research Database (Denmark)

    Madsen, Henning

    The degree of development in the technical capability of many new devices and materials over their predecessors often is in multiples of improvement. These gains in performance are so great that they abruptly and drastically alter the means, effects, time, or costs of doing things. Thus, they dis......The degree of development in the technical capability of many new devices and materials over their predecessors often is in multiples of improvement. These gains in performance are so great that they abruptly and drastically alter the means, effects, time, or costs of doing things. Thus...... technology. The conclusion is that widespread awareness of the growing force of technology and increasing concern over its impact means that forecasting of technological development and consequences is absolutely essential in many managerial decision situations. Examples cover e.g. identification...

  1. Developing the Business Model – a Methodology for Virtual Enterprises

    DEFF Research Database (Denmark)

    Tølle, Martin; Vesterager, Johan

    2003-01-01

    This chapter presents a methodology to develop Virtual Enterprises (VEs). This Virtual Enterprise Methodology (VEM) outlines activities to consider when setting up and managing virtual enterprises. As a methodology the VEM helps companies to ask the right questions when preparing for, and setting...

  2. Development of a methodology for microstructural description

    Directory of Open Access Journals (Sweden)

    Vanderley de Vasconcelos

    1999-07-01

    Full Text Available A systematic methodology for microstructural description can help the task of obtaining the processing x microstructure x properties x performance relationships. There are, however, some difficulties in performing this task, which are related mainly to the following three factors: the complexity of the interactions between microstructural features; difficulties in evaluating geometric parameters of microstructural features; and difficulties in relating these geometric parameters to process variables. To solve some of these problems, it is proposed a methodology that embodies the following features: takes into account the different possible types of approaches for the microstructural description problem; includes concepts and tools of Total Quality Management; is supported on techniques of system analysis; and makes use of computer modeling and simulation and statistical design of experiments tools. The methodology was applied on evaluating some topological parameters during sintering process and its results were compared with available experimental data.

  3. A methodology to investigate the usage of educational technologies on tablets in schools

    NARCIS (Netherlands)

    Molenaar, I.; Schaik, A. van

    2016-01-01

    This chapter introduces a methodology to study how educational technologies on tablets are being used in schools. Specifically it investigates how different educational technologies influence the organization of the learning environment and the way teachers teach. Educational technologies differ gre

  4. A methodological proposal to contribute to the development of research skills in science education to start the design of a didactic unit built on foundations of scientific and technological literacy

    Directory of Open Access Journals (Sweden)

    Andrés Felipe Velásquez Mosquera

    2013-10-01

    Full Text Available This paper seeks to promote a discussion of the need to promote the training of investigative skills in students of natural sciences from a methodology structured from the design of the plan of course, including a didactic unit, based on scientific and technological literacy to. It is the result of several years of experience in teaching and research of the author in the field of the didactics of the sciences. 

  5. A methodological proposal to contribute to the development of research skills in science education to start the design of a didactic unit built on foundations of scientific and technological literacy

    OpenAIRE

    Andrés Felipe Velásquez Mosquera; Eduardo Augusto López

    2013-01-01

    This paper seeks to promote a discussion of the need to promote the training of investigative skills in students of natural sciences from a methodology structured from the design of the plan of course, including a didactic unit, based on scientific and technological literacy to. It is the result of several years of experience in teaching and research of the author in the field of the didactics of the sciences. 

  6. Graphite Technology Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    W. Windes; T. Burchell; M.Carroll

    2010-10-01

    The Next Generation Nuclear Plant (NGNP) will be a helium-cooled High Temperature Gas Reactor (HTGR) with a large graphite core. Graphite physically contains the fuel and comprises the majority of the core volume. Graphite has been used effectively as a structural and moderator material in both research and commercial high-temperature gas-cooled reactors. This development has resulted in graphite being established as a viable structural material for HTGRs. While the general characteristics necessary for producing nuclear grade graphite are understood, historical “nuclear” grades no longer exist. New grades must be fabricated, characterized, and irradiated to demonstrate that current grades of graphite exhibit acceptable non-irradiated and irradiated properties upon which the thermomechanical design of the structural graphite in NGNP is based. This Technology Development Plan outlines the research and development (R&D) activities and associated rationale necessary to qualify nuclear grade graphite for use within the NGNP reactor.

  7. Applying Lean on Agile Scrum Development Methodology

    Directory of Open Access Journals (Sweden)

    SurendRaj Dharmapal

    2015-11-01

    Full Text Available This journal introduces the reader to Agile and Lean concepts and provides a basic level of understanding of each process. This journal will also provide a brief background about applying Lean concepts on each phase of agile scrum methodology and summarize their primary business advantages for delivering value to customer.

  8. Applying Lean on Agile Scrum Development Methodology

    Directory of Open Access Journals (Sweden)

    SurendRaj Dharmapal

    2014-03-01

    Full Text Available This journal introduces the reader to Agile and Lean concepts and provides a basic leve l of understanding of each process. This journal will also provide a brief background about applying Lean concepts on each phase of agile scrum methodology and summarize their primary business advantages for delivering value to customer.

  9. THE EFFICIENCY OF TECHNOLOGY TRANSFER – THEORETICAL AND METHODOLOGICAL APPROACH

    Directory of Open Access Journals (Sweden)

    Andreea-Clara MUNTEANU

    2006-06-01

    Full Text Available As the importance and complexity level of technological transfer increased, the need of adequate systems of assessing the efficiency of this process became the more obvious. Introducing sustainability criteria requires the creation of a complex framework for analysing and studying efficiency that would incorporate all other three dimensions of contemporary economic development: economic, social and environmental.

  10. Payload software technology: Software technology development plan

    Science.gov (United States)

    1977-01-01

    Programmatic requirements for the advancement of software technology are identified for meeting the space flight requirements in the 1980 to 1990 time period. The development items are described, and software technology item derivation worksheets are presented along with the cost/time/priority assessments.

  11. Artifacts and collaborative work in healthcare: methodological, theoretical, and technological implications of the tangible.

    Science.gov (United States)

    Xiao, Yan

    2005-02-01

    Although modeled as knowledge work with emphasis on data flow and decision making, healthcare is delivered in the context of a highly structured physical environment, with much effort and emphasis placed on physical and spatial arrangement and re-arrangement of workers, patients, and materials. The tangible aspects of highly collaborative healthcare work have profound implications for research and development of information and communication technology (ICT) despite the tendency to model work as flow of abstract data items. This article reviews field studies in healthcare and other domains on the role of artifacts in collaborative work and draws implications in three areas: methodological, theoretical, and technological. In regard to methodologies, assessment of new ICT and development of user requirements should take into account how artifacts are used and exploited to facilitate collaborative work. In regard to theories, the framework of distributed cognition provides a starting point for modeling the contribution and exploitation of physical artifacts in supporting collaborative work. In regard to technology, design and deployment of new technology should support the functions provided by physical artifacts replaced or disrupted by new technology, and profitable ways for new technology to support collaborative work by embedding ICT into existing infrastructure of physical artifacts.

  12. Agile vs Traditional Methodologies in Developing Information Systems

    Directory of Open Access Journals (Sweden)

    Pere Tumbas

    2006-12-01

    Full Text Available After the review of principles and concepts of structural and object-oriented development of information systems, the work points to the elements of agile approaches and gives short description of some selected agile methodologies. After these reviews, their comparision according to criteria is done. The first criterion reviews the volume of methodology in which project management is used in developing information systems The second criterion shows if the processes, defined by methodology, cover appropriate phase of the life cycle. The last criterion shows if methodology iniciates the use of skills and tools in the life cycle phases of developing information systems. Finally, the work compares, according to the key elements of development, traditional (structural and object methodologies with agile methodologies.

  13. Development of sodium technology

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Sung Tai; Nam, H. Y.; Choi, Y. D. [and others

    2000-05-01

    The objective of present study is to produce the experimental data for development and verification of computer codes for development of LMR and to develop the preliminary technologies for the future large scale verification experiments. A MHD experimental test loop has been constructed for the quantitative analysis of the effect of magnetic field on the sodium flow and experiments are carried out for three EM pumps. The previous pressure drop correlations are evaluated using the experimental data obtained from the pressure drop experiment in a 19-pin fuel assembly with wire spacer. An dimensionless variable is proposed to describe the amplitude and frequency of the fluctuation of free surface using the experimental data obtained from free surface experimental apparatus and an empirical correlation is developed using this dimensionless variable. An experimental test loop is constructed to measure the flow characteristics in IHX shell side and the local pressure drop in fuel assembly, and to test the vibration behaviour of fuel pins due to flow induced vibration. The sodium two-phase flow measuring technique using the electromagnetic flowmeter is developed and the sodium differential pressure drop measuring technique using the method of direct contact of sodium and oil is established. The work on the analysis of sodium fire characteristics and produce data for vlidation of computer code is performed. Perfect reopen time of self plugged leak path was observed to be about 130 minutes after water leak initiation. Reopen shape of a specimen appeared to be double layer of circular type, and reopen size of this specimen surface was about 2mm diameter on sodium side. In small water leakage experiments, the following correlation equation about the reopen time between sodium temperature and initial leak rate was obtained, {tau}{sub c} = {delta}{center_dot}g{sup -0.83}{center_dot}10{sup (3570/T{sub Na}-3.34)}, in 400-500 deg C of liquid sodium atmosphere. The characteristics

  14. Technology Development of Safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ho Dong; Kang, H. Y.; Ko, W. I. (and others)

    2007-04-15

    The objective of this project is to perform R and D on the essential technologies in nuclear material measurement and surveillance and verification system, and to improve the state of being transparent on the nuclear material management of DUPIC Fuel Development Facility (DFDF) through the evaluation of safeguard ability on non-proliferation fuel cycle and nuclear proliferation resistance. Nuclear material position scan system for the reduction of measurement error was developed for the spatial distribution search of spent fuel in DUPIC facility. Web-based realtime remote monitoring system was designed and constructed for satisfying the IAEA's performance criteria of continuous monitoring, and also developed a software for the function of remote control and message. And diversion paths in a proliferation resistant pyroprocess for SFR were analyzed and its protecting system against the diversion paths were suggested for enhancing proliferation resistance of advanced nuclear fuel cycle. These results could be used for planning the further R and D items in the area of safeguards. Those R and D results mentioned above would be helpful for increasing Korean nuclear transparency in the future.

  15. Developments in lubricant technology

    CERN Document Server

    Srivastava, S P

    2014-01-01

    Provides a fundamental understanding of lubricants and lubricant technology including emerging lubricants such as synthetic and environmentally friendly lubricants Teaches the reader to understand the role of technology involved in the manufacture of lubricants Details both major industrial oils and automotive oils for various engines Covers emerging lubricant technology such as synthetic and environmentally friendly lubricants Discusses lubricant blending technology, storage, re-refining and condition monitoring of lubricant in equipment

  16. 6th International Conference in Methodologies and intelligent Systems for Technology Enhanced Learning

    CERN Document Server

    Prieta, Fernando; Mascio, Tania; Gennari, Rosella; Rodríguez, Javier; Vittorini, Pierpaolo

    2016-01-01

    The 6th International Conference in Methodologies and intelligent Systems for Technology Enhanced Learning held in Seville (Spain) is host by the University of Seville from 1st to 3rd June, 2016. The 6th edition of this conference expands the topics of the evidence-based TEL workshops series in order to provide an open forum for discussing intelligent systems for TEL, their roots in novel learning theories, empirical methodologies for their design or evaluation, stand-alone solutions or web-based ones. It intends to bring together researchers and developers from industry, the education field and the academic world to report on the latest scientific research, technical advances and methodologies.

  17. A designerly methodology for software development

    NARCIS (Netherlands)

    Du Bois , E.

    2013-01-01

    This PhD researches the domain of industrial design engineering starting from the strong technological evolutions and changing economic, social and ecological needs. Our current products are not only build from hardware components, but are a complex mix of hardware, software and services (in

  18. A designerly methodology for software development

    NARCIS (Netherlands)

    Du Bois , E.

    2013-01-01

    This PhD researches the domain of industrial design engineering starting from the strong technological evolutions and changing economic, social and ecological needs. Our current products are not only build from hardware components, but are a complex mix of hardware, software and services (in differ

  19. Advanced Power Plant Development and Analysis Methodologies

    Energy Technology Data Exchange (ETDEWEB)

    A.D. Rao; G.S. Samuelsen; F.L. Robson; B. Washom; S.G. Berenyi

    2006-06-30

    Under the sponsorship of the U.S. Department of Energy/National Energy Technology Laboratory, a multi-disciplinary team led by the Advanced Power and Energy Program of the University of California at Irvine is defining the system engineering issues associated with the integration of key components and subsystems into advanced power plant systems with goals of achieving high efficiency and minimized environmental impact while using fossil fuels. These power plant concepts include 'Zero Emission' power plants and the 'FutureGen' H2 co-production facilities. The study is broken down into three phases. Phase 1 of this study consisted of utilizing advanced technologies that are expected to be available in the 'Vision 21' time frame such as mega scale fuel cell based hybrids. Phase 2 includes current state-of-the-art technologies and those expected to be deployed in the nearer term such as advanced gas turbines and high temperature membranes for separating gas species and advanced gasifier concepts. Phase 3 includes identification of gas turbine based cycles and engine configurations suitable to coal-based gasification applications and the conceptualization of the balance of plant technology, heat integration, and the bottoming cycle for analysis in a future study. Also included in Phase 3 is the task of acquiring/providing turbo-machinery in order to gather turbo-charger performance data that may be used to verify simulation models as well as establishing system design constraints. The results of these various investigations will serve as a guide for the U. S. Department of Energy in identifying the research areas and technologies that warrant further support.

  20. Advanced Power Plant Development and Analyses Methodologies

    Energy Technology Data Exchange (ETDEWEB)

    G.S. Samuelsen; A.D. Rao

    2006-02-06

    Under the sponsorship of the U.S. Department of Energy/National Energy Technology Laboratory, a multi-disciplinary team led by the Advanced Power and Energy Program of the University of California at Irvine is defining the system engineering issues associated with the integration of key components and subsystems into advanced power plant systems with goals of achieving high efficiency and minimized environmental impact while using fossil fuels. These power plant concepts include ''Zero Emission'' power plants and the ''FutureGen'' H{sub 2} co-production facilities. The study is broken down into three phases. Phase 1 of this study consisted of utilizing advanced technologies that are expected to be available in the ''Vision 21'' time frame such as mega scale fuel cell based hybrids. Phase 2 includes current state-of-the-art technologies and those expected to be deployed in the nearer term such as advanced gas turbines and high temperature membranes for separating gas species and advanced gasifier concepts. Phase 3 includes identification of gas turbine based cycles and engine configurations suitable to coal-based gasification applications and the conceptualization of the balance of plant technology, heat integration, and the bottoming cycle for analysis in a future study. Also included in Phase 3 is the task of acquiring/providing turbo-machinery in order to gather turbo-charger performance data that may be used to verify simulation models as well as establishing system design constraints. The results of these various investigations will serve as a guide for the U. S. Department of Energy in identifying the research areas and technologies that warrant further support.

  1. Advanced Adaptive Optics Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Olivier, S

    2001-09-18

    The NSF Center for Adaptive Optics (CfAO) is supporting research on advanced adaptive optics technologies. CfAO research activities include development and characterization of micro-electro-mechanical systems (MEMS) deformable mirror (DM) technology, as well as development and characterization of high-resolution adaptive optics systems using liquid crystal (LC) spatial light modulator (SLM) technology. This paper presents an overview of the CfAO advanced adaptive optics technology development activities including current status and future plans.

  2. MELTED BUTTER TECHNOLOGY DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    L. V. Golubeva

    2014-01-01

    Full Text Available Summary. Melted butter is made from dairy butter by rendering the fat phase. It has specific taste and aroma, high-calorie content and good assimilability. Defects of butter which appeared during the storage causes by the development of microbiological processes or by the chemical oxidation. On the development of these processes influence quality and composition of fresh butter, its physical structure, content of the increased amount of gas phase and content of heavy metals, storage conditions. Microbiological spoilage of butter occurs generally due to damage of plasma which is good environment for the development of microorganisms. Defects of microbiological origin include: unclean, sour, moldy, yeasty, cheesy, bitter taste. Defects of test and smell chemical origin are formed due to hydrolytic digestion of lipids. It's prevailed at long storage of butter in the conditions of freezing temperatures. It's picked out the following main processes of spoiling: souring, acidifying and sallowness. Often these processes take place simultaneously.It has been investigated melted butter with lactated additive. The latter improves the microbiological and toxicological safety, prolongs the storage condition of the products. Technological efficiency of the additives is achieved by a multilayer products formation from the inactive bound water, preventing microorganisms growth and by the barrier layer with lactate inhibiting hydrolytic reactions. Oil samples were obtained with the batch-type butter maker application, then they were melted and after that lactated additive were supplemented. It has been studied organoleptic and physico-chemical indices of the melted butter samples. The fatty-acid composition of melted butter were studied. Comparative analysis of fatty-acid composition of cow's milk fat and produced melted butter has shown their similarity. Also in the last sample there is increased weight fraction of linoleic and linolenic acids. The obtained

  3. Modeling and Architectural Design in Agile Development Methodologies

    NARCIS (Netherlands)

    Stojanovic, Z.; Dahanayake, A.; Sol, H

    2003-01-01

    Agile Development Methodologies have been designed to address the problem of delivering high-quality software on time under constantly and rapidly changing requirements in business and IT environments. Agile development processes are characterized by extensive coding practice, intensive communicatio

  4. China's Spacecraft Technology Developing Steadily

    Institute of Scientific and Technical Information of China (English)

    Ren Shufang

    2008-01-01

    @@ 2008 sees the 40th anniversary of China Academy of Space Technology (CAST).As the main satellite manufacture base,CAST has overcome many difficulties in the field of space technology,achieved project approval for several major space science and technology programs,and made many breakthroughs in core technologies and key technologies with its own intellectual property rights in 40 years development.

  5. Attuning speech-enabled interfaces to user and context for inclusive design: Technology, methodology and practice

    NARCIS (Netherlands)

    Neerincx, M.A.; Cremers, A.H.M.; Kessens, J.M.; Leeuwen, D.A. van; Truong, K.P.

    2009-01-01

    This paper presents a methodology to apply speech technology for compensating sensory, motor, cognitive and affective usage difficulties. It distinguishes (1) an analysis of accessibility and technological issues for the identification of context-dependent user needs and corresponding opportunities

  6. Attuning speech-enabled interfaces to user and context for inclusive design: Technology, methodology and practice

    NARCIS (Netherlands)

    Neerincx, M.A.; Cremers, A.H.M.; Kessens, J.M.; Leeuwen, D.A. van; Truong, K.P.

    2009-01-01

    This paper presents a methodology to apply speech technology for compensating sensory, motor, cognitive and affective usage difficulties. It distinguishes (1) an analysis of accessibility and technological issues for the identification of context-dependent user needs and corresponding opportunities

  7. Development of Technological Profiles for Transfer of Energy- and Resource Saving Technologies

    Directory of Open Access Journals (Sweden)

    Lysenko, V.S.

    2015-01-01

    Full Text Available The article deals with the methodological foundations for the development of technological profiles for «System of Transfer of Energy- and Resource Saving Technologies». It is determined that a compliance with the methodology and standards of the European network «Relay Centers» (Innovation Relay Centers — IRC network, since 2008 — EEN, the Russian Technology Transfer Network RTTN and Uk rainian Technology Transfer Network UTTN is the main pri nciple of the development process of technological requests and offers.

  8. Nigerian Journal of Technological Development

    African Journals Online (AJOL)

    The Nigerian Journal of Technological Development is a biannual publication of the Faculty of Engineering & Technology, University of Ilorin, Ilorin, Nigeria. ... Mechanical properties of millet husk ash bitumen stabilized soil block · EMAIL ...

  9. Development of the destruction technology for radioactive organic solid wastes

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Won Zin; Park, H.S.; Lee, K.W. [and others

    1999-04-01

    The followings were studied through the project entitled 'Technology development for nuclear fuel cycle waste treatment'. 1. Organic waste decomposition technology development A. Destruction technology for organic wastes using Ag(2)-mediated electrochemical oxidation B. Recovery and regeneration technology for the spent chemicals used in the MEO process 2. Radioactive metal waste recycling technology A. Surface decontamination processes B. Decontamination waste treatment technology 3. Volume reduction technology nuclear fuel cycle (NFC) technology A. Estimation of the amount of radwastes and the optimum volume reduction methodology of domestic NFC B. Pretreatment of spent fuel cladding by electrochemical decontamination C. Hot cell process technology for the treatment of NFC wastes 4. Design and fabrication of the test equipment of volume reduction and reuse of alpha contaminated wastes 5. Evaluation on environmental compatibility of NFC A. Development of evaluation methodology on environmental friendliness of NFC B. Residual activity assessment of recycling wastes. (author). 321 refs., 54 tabs., 183 figs.

  10. ENACTED SOFTWARE DEVELOPMENT PROCESS BASED ON AGILE AND AGENT METHODOLOGIES

    OpenAIRE

    DR. NACHAMAI. M; M. Senthil Vadivu; VINITA TAPASKAR

    2011-01-01

    Software Engineering gives the procedures and practices to be followed in the software development and acts as a backbone for computer science engineering techniques. This paper deals with current trends in software engineering methodologies, Agile and Agent Oriented software development process. Agile Methodology is to meet the needs of dynamic changing requirements of the customers. This model is iterative and incremental and accepts the changes in requirements at any stage of development. ...

  11. Microgenetic Analysis of Moral Development: Theoretical and Methodological Issues

    OpenAIRE

    Barrios, Alia; Barbato,Silviane; Branco,Angela

    2012-01-01

    New ideas and methodologies need to be developed to advance our knowledge in the understanding of moral development. The intertwined nature of human activities, communication processes, and the numerous aspects of morality pose a challenge to researchers to construct a methodology that takes into account cognition, affect, sociocultural processes and characteristics, as well as the active role of individuals in their own development. In this paper we aim at suggesting fresh theoretical ideas ...

  12. High-throughput measurement methodologies for developing ...

    African Journals Online (AJOL)

    African Journal of Food, Agriculture, Nutrition and Development ... Journal Home > Vol 17, No 2 (2017) > ... When analyzing the minerals Fe and Zn, these same techniques are not suitable, but it is still important to ensure careful sample ...

  13. An assessment methodology for developing countries

    African Journals Online (AJOL)

    life-cycle assessment approach and an expanded definition of sustainability, ... However, these systems tend not to address social or economic aspects and ... development as “... improving the quality of human life while living within the ...

  14. Development of Engine Loads Methodology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR seeks to improve the definition of design loads for rocket engine components such that higher performing, lighter weight engines can be developed more...

  15. Developing human technology curriculum

    Directory of Open Access Journals (Sweden)

    Teija Vainio

    2012-10-01

    Full Text Available During the past ten years expertise in human-computer interaction has shifted from humans interacting with desktop computers to individual human beings or groups of human beings interacting with embedded or mobile technology. Thus, humans are not only interacting with computers but with technology. Obviously, this shift should be reflected in how we educate human-technology interaction (HTI experts today and in the future. We tackle this educational challenge first by analysing current Master’s-level education in collaboration with two universities and second, discussing postgraduate education in the international context. As a result, we identified core studies that should be included in the HTI curriculum. Furthermore, we discuss some practical challenges and new directions for international HTI education.

  16. Entropy and gravity concepts as new methodological indexes to investigate technological convergence: patent network-based approach.

    Directory of Open Access Journals (Sweden)

    Yongrae Cho

    Full Text Available The volatility and uncertainty in the process of technological developments are growing faster than ever due to rapid technological innovations. Such phenomena result in integration among disparate technology fields. At this point, it is a critical research issue to understand the different roles and the propensity of each element technology for technological convergence. In particular, the network-based approach provides a holistic view in terms of technological linkage structures. Furthermore, the development of new indicators based on network visualization can reveal the dynamic patterns among disparate technologies in the process of technological convergence and provide insights for future technological developments. This research attempts to analyze and discover the patterns of the international patent classification codes of the United States Patent and Trademark Office's patent data in printed electronics, which is a representative technology in the technological convergence process. To this end, we apply the physical idea as a new methodological approach to interpret technological convergence. More specifically, the concepts of entropy and gravity are applied to measure the activities among patent citations and the binding forces among heterogeneous technologies during technological convergence. By applying the entropy and gravity indexes, we could distinguish the characteristic role of each technology in printed electronics. At the technological convergence stage, each technology exhibits idiosyncratic dynamics which tend to decrease technological differences and heterogeneity. Furthermore, through nonlinear regression analysis, we have found the decreasing patterns of disparity over a given total period in the evolution of technological convergence. This research has discovered the specific role of each element technology field and has consequently identified the co-evolutionary patterns of technological convergence. These new findings

  17. USING THE AHP METHODOLOGY TO EVALUATE STRATEGIC INVESTMENT ALTERNATIVES OF NEW PARADIGMS IN INFORMATION TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    EMILIJA RISTOVA

    2012-02-01

    Full Text Available Enterprise adoption of a Product Life Cycle Management (PLM system is a multi-faceted process that can be simplified by choosing the right information technology (IT deployment model. Cloud computing has been described as a technological change brought about by the convergence of a number of new and existing technologies. The paper provides a review of the main developments in the AHP (Analytical Hierarchy Processmethodology as a tool for decision makers to be able to do more informed decisions regarding investments in new paradigms that IT offers. The AHP methodology is a multi-objective, multi criteria decision-making approach that employs a pair-wise comparison procedure to arrive at a scale of preferences among a set of alternatives. The selection process of the alternatives is not possible from the result of the financial analysis alone. Identification of the scalability and the risks assessment as criteria’s give us the comprehensiveness of the treated problem.

  18. A review of methodologies used in research on cadastral development

    DEFF Research Database (Denmark)

    Silva, Maria Augusta; Stubkjær, Erik

    2002-01-01

    to the acceptance of research methodologies needed for cadastral development, and thereby enhance theory in the cadastral domain. The paper reviews nine publica-tions on cadastre and identifies the methodologies used. The review focuses on the institutional, social political and economic aspects of cadastral...... development, rather than on the technical aspects. The main conclusion of this paper is that the methodologies used are largely those of the social sciences. That agrees with the notion that cadastre relates as much to people and institutions, as it relates to land, and that cadastral systems are shaped...

  19. Robotics Technology Development Program. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    The Robotics Technology Development Program (RTDP) is a ``needs-driven`` effort. A lengthy series of presentations and discussions at DOE sites considered critical to DOE`s Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination & Dismantlement (D&D). The RTDP Group realized that much of the technology development was common (Cross Cutting-CC) to each of these robotics application areas, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT&E) process urged an additional organizational break-out between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). The RDTP is thus organized around these application areas -- TWR, CAA, MWO, D&D and CC&AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas.

  20. MULTIMEDIA MOBILE CONTENT DEVELOPMENT FRAMEWORK AND METHODOLOGY FOR DEVELOPING M-LEARNING APPLICATIONS

    Directory of Open Access Journals (Sweden)

    Wan Sazli Nasaruddin Saifudin Saifudin

    2012-07-01

    Full Text Available Mobile devices limitations such as small screen resolution, limited data space and slow processing speed pose challenges to the developers in developing good m-learning applications. Therefore, aspects such as content design, navigation design and mobile HCI are critical and need greater attention during the development phase. The purpose of this paper is to discuss a Multimedia Mobile Content Development (MMCD Framework and Methodology for developing an effective m-Learning application that focuses on user needs. MMCD is based on the characteristic of an agile development model and by using a Flash Light (FL technology which is widely supported by today’s mobile devices, the final output is compatible with the majorities of available mobile devices which would encourage mobile-learning activities. Focus on the object or content design and the navigation control are two development aspects that help the development of learning application via mobile device optimized.

  1. A methodology for capability-based technology evaluation for systems-of-systems

    Science.gov (United States)

    Biltgen, Patrick Thomas

    2007-12-01

    Post-Cold War military conflicts have highlighted the need for a flexible, agile joint force responsive to emerging crises around the globe. The 2005 Joint Capabilities Integration and Development System (JCIDS) acquisition policy document mandates a shift away from stove-piped threat-based acquisition to a capability-based model focused on the multiple ways and means of achieving an effect. This shift requires a greater emphasis on scenarios, tactics, and operational concepts during the conceptual phase of design and structured processes for technology evaluation to support this transition are lacking. In this work, a methodology for quantitative technology evaluation for systems-of-systems is defined. Physics-based models of an aircraft system are exercised within a hierarchical, object-oriented constructive simulation to quantify technology potential in the context of a relevant scenario. A major technical challenge to this approach is the lack of resources to support real-time human-in-the-loop tactical decision making and technology analysis. An approach that uses intelligent agents to create a "Meta-General" capable of forecasting strategic and tactical decisions based on technology inputs is used. To demonstrate the synergy between new technologies and tactics, surrogate models are utilized to provide intelligence to individual agents within the framework and develop a set of tactics that appropriately exploit new technologies. To address the long run-times associated with constructive military simulations, neural network surrogate models are implemented around the forecasting environment to enable rapid trade studies. Probabilistic techniques are used to quantify uncertainty and richly populate the design space with technology-infused alternatives. Since a large amount of data is produced in the analysis of systems-of-systems, dynamic, interactive visualization techniques are used to enable "what-if" games on assumptions, systems, technologies, tactics, and

  2. Developing enterprise collaboration: a methodology to implement and improve interoperability

    Science.gov (United States)

    Daclin, Nicolas; Chen, David; Vallespir, Bruno

    2016-06-01

    The aim of this article is to present a methodology for guiding enterprises to implement and improve interoperability. This methodology is based on three components: a framework of interoperability which structures specific solutions of interoperability and is composed of abstraction levels, views and approaches dimensions; a method to measure interoperability including interoperability before (maturity) and during (operational performances) a partnership; and a structured approach defining the steps of the methodology, from the expression of an enterprise's needs to implementation of solutions. The relationship which consistently relates these components forms the methodology and enables developing interoperability in a step-by-step manner. Each component of the methodology and the way it operates is presented. The overall approach is illustrated in a case study example on the basis of a process between a given company and its dealers. Conclusions and future perspectives are given at the end of the article.

  3. A Conceptual Methodology for Assessing Acquisition Requirements Robustness against Technology Uncertainties

    Science.gov (United States)

    Chou, Shuo-Ju

    2011-12-01

    -makers with the ability to assess or measure the robustness of program requirements against such uncertainties. A literature review of techniques for forecasting technology performance and development uncertainties and subsequent impacts on capability, budget, and schedule requirements resulted in the conclusion that an analysis process that coupled a probabilistic analysis technique such as Monte Carlo Simulations with quantitative and parametric models of technology performance impact and technology development time and cost requirements would allow the probabilities of meeting specific constraints of these requirements to be established. These probabilities of requirements success metrics can then be used as a quantitative and probabilistic measure of program requirements robustness against technology uncertainties. Combined with a Multi-Objective Genetic Algorithm optimization process and computer-based Decision Support System, critical information regarding requirements robustness against technology uncertainties can be captured and quantified for acquisition decision-makers. This results in a more informed and justifiable selection of program technologies during initial program definition as well as formulation of program development and risk management strategies. To meet the stated research objective, the ENhanced TEchnology Robustness Prediction and RISk Evaluation (ENTERPRISE) methodology was formulated to provide a structured and transparent process for integrating these enabling techniques to provide a probabilistic and quantitative assessment of acquisition program requirements robustness against technology performance and development uncertainties. In order to demonstrate the capabilities of the ENTERPRISE method and test the research Hypotheses, an demonstration application of this method was performed on a notional program for acquiring the Carrier-based Suppression of Enemy Air Defenses (SEAD) using Unmanned Combat Aircraft Systems (UCAS) and their enabling

  4. Contrasting Technology Integration and Traditional Methodology in Adult ESL Instruction

    Science.gov (United States)

    Kinser, Jeong-Lan

    2006-01-01

    The usage of technology in adult ESL classrooms needs to be examined as it is creating new opportunities and added challenges. The purpose of the study was to explore how technology was being used in such environment and what factors contributed as supports or hindrances to technology use. Interviews, questionnaires, and observations were used to…

  5. Emerging technologies and corporate culture at Microsoft: a methodological note.

    Science.gov (United States)

    Klein, David; Schmeling, James; Blanck, Peter

    2005-01-01

    This article explores factors important in the study and examination of corporate culture and change. The particular focus is on the technological methods used to conduct a study of accessible technology and corporate culture at Microsoft Corporation. Reasons for particular approaches are explained. Advantages and challenges of emerging technologies that store and retrieve information in the study of corporate culture are reviewed.

  6. Methodology of constructive technology assessment in health care

    NARCIS (Netherlands)

    Douma, Kirsten F.L.; Karsenberg, Kim; Hummel, Marjan J.M.; Bueno-de-Mesquita, Jolien M.; Harten, van Wim H.

    2007-01-01

    Objectives: Technologies in health care are evolving quickly, with new findings in the area of biotechnological and genetic research being published regularly. A health technology assessment (HTA) is often used to answer the question of whether the new technology should be implemented into clinical

  7. A review of methodologies used in research on cadastral development

    DEFF Research Database (Denmark)

    Silva, Maria Augusta; Stubkjær, Erik

    2002-01-01

    World-wide, much attention has been given to cadastral development. As a consequence of experiences made during the last decades, several authors have stated the need of research in the domain of cadastre and proposed methodologies to be used. The purpose of this paper is to contribute...... to the acceptance of research methodologies needed for cadastral development, and thereby enhance theory in the cadastral domain. The paper reviews nine publica-tions on cadastre and identifies the methodologies used. The review focuses on the institutional, social political and economic aspects of cadastral...... development, rather than on the technical aspects. The main conclusion of this paper is that the methodologies used are largely those of the social sciences. That agrees with the notion that cadastre relates as much to people and institutions, as it relates to land, and that cadastral systems are shaped...

  8. New Space Technology Development

    Science.gov (United States)

    Mueller, Rob

    2014-01-01

    Visitors from Moon Express, a privately funded commercial space company, will be visiting KSC Swamp Works. This presentation includes a high-level introduction to NASA and commercial partnerships, as well as brief background on the moon - what we used to think about it hundreds of years ago, and what we know today with advanced technologies.***This third part being added includes Swamp Works technical capabilities and has a high-level overview of a selection of projects.***

  9. Development of the advanced CANDU technology

    Energy Technology Data Exchange (ETDEWEB)

    Suk, Soo Dong; Min, Byung Joo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Na, Y. H.; Lee, S. Y.; Choi, J. H.; Lee, B. C.; Kim, S. N.; Jo, C. H.; Paik, J. S.; On, M. R.; Park, H. S.; Kim, S. R. [Korea Electric Power Co., Taejon (Korea, Republic of)

    1997-07-01

    The purpose of this study is to develop the advanced design technology to improve safety, operability and economy and to develop and advanced safety evaluation system. More realistic and reasonable methodology and modeling was employed to improve safety margin in containment analysis. Various efforts have been made to verify the CATHENA code which is the major safety analysis code for CANDU PHWR system. Fully computerized prototype ECCS was developed. The feasibility study and conceptual design of the distributed digital control system have been performed as well. The core characteristics of advanced fuel cycle, fuel management and power upgrade have been studied to determine the advanced core. (author). 77 refs., 51 tabs., 108 figs.

  10. The Backyard Human Performance Technologist: Applying the Development Research Methodology to Develop and Validate a New Instructional Design Framework

    Science.gov (United States)

    Brock, Timothy R.

    2009-01-01

    Development research methodology (DRM) has been recommended as a viable research approach to expand the practice-to-theory/theory-to-practice literature that human performance technology (HPT) practitioners can integrate into the day-to-day work flow they already use to develop instructional products. However, little has been written about how it…

  11. Chemical technology for appropriate development

    NARCIS (Netherlands)

    Van Brakel, J.

    1978-01-01

    'Chemical technology for appropriate development' is basicly a critical review of the literature. It gives a conceptual analysis of so called appropriate technology and the choice of production systems for less-development countries. The role of about 40 organizations active in this emerging field

  12. Development of an in-situ soil structure characterization methodology

    Science.gov (United States)

    Debos, Endre; Kriston, Sandor

    2015-04-01

    The agricultural cultivation has several direct and indirect effects on the soil properties, among which the soil structure degradation is the best known and most detectable one. Soil structure degradation leads to several water and nutrient management problems, which reduce the efficiency of agricultural production. There are several innovative technological approaches aiming to reduce these negative impacts on the soil structure. The tests, validation and optimization of these methods require an adequate technology to measure the impacts on the complex soil system. This study aims to develop an in-situ soil structure and root development testing methodology, which can be used in field experiments and which allows one to follow the real time changes in the soil structure - evolution / degradation and its quantitative characterization. The method is adapted from remote sensing image processing technology. A specifically transformed A/4 size scanner is placed into the soil into a safe depth that cannot be reached by the agrotechnical treatments. Only the scanner USB cable comes to the surface to allow the image acquisition without any soil disturbance. Several images from the same place can be taken throughout the vegetation season to follow the soil consolidation and structure development after the last tillage treatment for the seedbed preparation. The scanned image of the soil profile is classified using supervised image classification, namely the maximum likelihood classification algorithm. The resulting image has two principal classes, soil matrix and pore space and other complementary classes to cover the occurring thematic classes, like roots, stones. The calculated data is calibrated with filed sampled porosity data. As the scanner is buried under the soil with no changes in light conditions, the image processing can be automated for better temporal comparison. Besides the total porosity each pore size fractions and their distributions can be calculated for

  13. General Methodology for developing UML models from UI

    CERN Document Server

    Reddy, Ch Ram Mohan; Srinivasa, K G; Kumar, T V Suresh; Kanth, K Rajani

    2012-01-01

    In recent past every discipline and every industry have their own methods of developing products. It may be software development, mechanics, construction, psychology and so on. These demarcations work fine as long as the requirements are within one discipline. However, if the project extends over several disciplines, interfaces have to be created and coordinated between the methods of these disciplines. Performance is an important quality aspect of Web Services because of their distributed nature. Predicting the performance of web services during early stages of software development is significant. In Industry, Prototype of these applications is developed during analysis phase of Software Development Life Cycle (SDLC). However, Performance models are generated from UML models. Methodologies for predicting the performance from UML models is available. Hence, In this paper, a methodology for developing Use Case model and Activity model from User Interface is presented. The methodology is illustrated with a case...

  14. Technological development in fisheries management

    DEFF Research Database (Denmark)

    Eigaard, Ole Ritzau; Marchal, Paul; Gislason, Henrik

    2014-01-01

    increases by 3.2% per year due to technological developments, an increase often ignored in fisheries management. The documentation and quantification of technological creep improves the basis for successfully integrating the effects of technological development (and catchability changes) in fisheries...... management regulations and policies. Ways of counteracting the undesired effects of technological creep are discussed as are the potential management benefits from improved fishing technology. Specific suggestions are given on the selection, application, and tuning of fisheries management tools that can......Many marine fish stocks are overexploited and considerable overcapacity exists in fishing fleets worldwide. One of the reasons for the imbalance between resource availability and fishing capacity is technological development, which continuously increases the efficiency of the vessels—a mechanism...

  15. METHODOLOGICAL QUESTIONS OF SCIENTIFIC COMMUNICATION PERFECTING WITH THE USE OF MODERN INFORMATION AND COMMUNICATION TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Georgii A. Ball

    2011-05-01

    Full Text Available The authors outline vital methodological questions which concern: (a value guidelines of scientific cognition and scientific communication; b theoretical bases (corresponding to task approach of building of scientific activity; c rational using of modern information and communication technologies in that activity. Among the most important steps towards the improvement of scientific communication the following were stressed: a awareness by scientists of their responsibility not only for adequate knowledge of the objects, but also for creating backgrounds so that the results of this knowledge might become the property of the consumers of scientific products, b development, to form such backgrounds, the ways based on adequate theoretical tools (in particular, on the task theory and on modern information and communication technologies, c coverage and discussion of the results of such development.

  16. Physical protection evaluation methodology program development and application

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Janghoon; Yoo, Hosik [Korea Institute of Nuclear Non-proliferation and Control, Daejeon (Korea, Republic of)

    2015-10-15

    It is essential to develop a reliable physical protection evaluation methodology for applying physical protection concept to the design stage. The methodology can be used to assess weak points and improve performance not only for the design stage but also for nuclear facilities in operation. Analyzing physical protection property of nuclear facilities is not a trivial work since there are many interconnected factors affecting overall performance. Therefore several international projects have been organized to develop a systematic physical protection evaluation methodology. INPRO (The International Project on Innovative Nuclear Reactors and Fuel Cycles) and GIF PRPP (Generation IV International Forum Proliferation Resistance and Physical Protection) methodology are among the most well-known evaluation methodologies. INPRO adopts a checklist type of questionnaire and has a strong point in analyzing overall characteristic of facilities in a qualitative way. COMPRE program has been developed to help general users apply COMPRE methodology to nuclear facilities. In this work, COMPRE program development and a case study of the hypothetical nuclear facility are presented. The development of COMPRE program and a case study for hypothetic facility is presented in this work. The case study shows that COMPRE PP methodology can be a useful tool to assess the overall physical protection performance of nuclear facilities. To obtain meaningful results from COMPRE PP methodology, detailed information and comprehensive analysis are required. Especially, it is not trivial to calculate reliable values for PPSE (Physical Protection System Effectiveness) and C (Consequence), while it is relatively straightforward to evaluate LI (Legislative and Institutional framework), MC (Material Control) and HR (Human Resources). To obtain a reliable PPSE value, comprehensive information about physical protection system, vital area analysis and realistic threat scenario assessment are required. Like

  17. Prometheus Reactor I&C Software Development Methodology, for Action

    Energy Technology Data Exchange (ETDEWEB)

    T. Hamilton

    2005-07-30

    The purpose of this letter is to submit the Reactor Instrumentation and Control (I&C) software life cycle, development methodology, and programming language selections and rationale for project Prometheus to NR for approval. This letter also provides the draft Reactor I&C Software Development Process Manual and Reactor Module Software Development Plan to NR for information.

  18. Business Model Change Methodology: Applying New Technology in Organization: The Case of Mobile Technology in Learning Industry

    OpenAIRE

    Nastaran Hajiheydari; Payam Hanafizadeh

    2013-01-01

    The present study intends to design a methodology for examining the influence of modern information and communication technology on business models (BMs). Theoretical framework is mainly selected based on literature as well as consultation with expert focus groups. This methodology is validated by expert judgment and simulated as a real case applying system dynamics. The outcome of the survey includes a change methodology formulated in 5 phases and 37 activities. Not only has this study cover...

  19. Consuming technologies - developing routines

    DEFF Research Database (Denmark)

    Gram-Hanssen, Kirsten

    2008-01-01

    Routines in daily life are crucial for consumption by households of energy and water and therefore knowledge of how routines develop and change is extremely relevant from a sustainable consumption perspective. Routines emerge, develop and change in close relation with different kinds of everyday ...

  20. Research and Development Methodology for Practical Use of Accident Tolerant Fuel in Light Water Reactors

    OpenAIRE

    Masaki Kurata

    2016-01-01

    Research and development (R&D) methodology for the practical use of accident tolerant fuel (ATF) in commercial light water reactors is discussed in the present review. The identification and quantification of the R&D-metrics and the attribute of candidate ATF-concepts, recognition of the gap between the present R&D status and the targeted practical use, prioritization of the R&D, and technology screening schemes are important for achieving a common understanding on technology screening proces...

  1. Methodology Approaches Regarding Classic versus Mobile Enterprise Application Development

    Directory of Open Access Journals (Sweden)

    Vasile-Daniel PAVALOAIA

    2013-01-01

    Full Text Available In the nowadays enterprise computerized context, there is a trend that shifts the business ap-plications to the new mobile environments. In the light of this information, it is highly important to be knowledgeable about the software development methodologies available in order to make the right choice when it comes to developing a mobile application. The current research aims to presenting the methodological approaches regarding the development cycle of classic enterprise software versus mobile apps. In the first part of the paper a brief literature review regarding the mobile apps is made, for the purpose of justifying the current research theme. The most consistent part of the article puts face-to-face the “classical” and the new development methodologies adapted to the requirements of the new mobile environment trends. The paper also presents the challenges and limitations of mobile applications as well as few of the future trends in the researched domain.

  2. A Methodology to Develop Design Support Tools for Stand-alone Photovoltaic Systems in Developing Countries

    Directory of Open Access Journals (Sweden)

    Stefano Mandelli

    2014-08-01

    Full Text Available As pointed out in several analyses, Stand-Alone Photovoltaic systems may be a relevant option for rural electrification in Developing Countries. In this context, Micro and Small Enterprises which supply customized Stand-Alone Photovoltaic systems play a pivotal role in the last-mile-distribution of this technology. Nevertheless, a number of issues limit the development of these enterprises curbing also potential spinoff benefits. A common business bottleneck is the lack of technical skills since usually few people have the expertise to design and formulate estimates for customers. The long-term solution to tackle this issue implies the implementation of a capacity building process, but this solution rarely matches with time-to-market urgency of local enterprises. Therefore, we propose in this study a simple, but general methodology which can be used to set up Design Support Tools for Micro and Small Enterprises that supply Stand-Alone Photovoltaic systems in rural areas of Developing Countries. After a brief review of the techniques and commercial software available to design the targeted technology, we describe the methodology highlighting the structure, the sizing equations and the main features that should be considered in developing a Design Support Tool. Then, we apply the methodology to set up a tool for use in Uganda and we compare the results with two commercial codes (NSolVx and HOMER. The results show that the implemented Design Support Tool develops correct system designs and presents some advantages for being disseminated in rural areas. Indeed it supports the user in providing the input data, selecting the main system components and delivering estimates to customers.

  3. Methodology for conceptual remote sensing spacecraft technology: insertion analysis balancing performance, cost, and risk

    Science.gov (United States)

    Bearden, David A.; Duclos, Donald P.; Barrera, Mark J.; Mosher, Todd J.; Lao, Norman Y.

    1997-12-01

    Emerging technologies and micro-instrumentation are changing the way remote sensing spacecraft missions are developed and implemented. Government agencies responsible for procuring space systems are increasingly requesting analyses to estimate cost, performance and design impacts of advanced technology insertion for both state-of-the-art systems as well as systems to be built 5 to 10 years in the future. Numerous spacecraft technology development programs are being sponsored by Department of Defense (DoD) and National Aeronautics and Space Administration (NASA) agencies with the goal of enhancing spacecraft performance, reducing mass, and reducing cost. However, it is often the case that technology studies, in the interest of maximizing subsystem-level performance and/or mass reduction, do not anticipate synergistic system-level effects. Furthermore, even though technical risks are often identified as one of the largest cost drivers for space systems, many cost/design processes and models ignore effects of cost risk in the interest of quick estimates. To address these issues, the Aerospace Corporation developed a concept analysis methodology and associated software tools. These tools, collectively referred to as the concept analysis and design evaluation toolkit (CADET), facilitate system architecture studies and space system conceptual designs focusing on design heritage, technology selection, and associated effects on cost, risk and performance at the system and subsystem level. CADET allows: (1) quick response to technical design and cost questions; (2) assessment of the cost and performance impacts of existing and new designs/technologies; and (3) estimation of cost uncertainties and risks. These capabilities aid mission designers in determining the configuration of remote sensing missions that meet essential requirements in a cost- effective manner. This paper discuses the development of CADET modules and their application to several remote sensing satellite

  4. Developing and Evaluating Collaborative Technologies

    Science.gov (United States)

    2005-11-01

    undertaking. This paper considers the topic of assessing collaborative technologies in the context of military logistics . A historical view of collaborative...research in military logistics is provided, as well as a discussion of current research aimed at developing a framework for assessing collaborative technologies.

  5. Towards an MDA-based development methodology for distributed applications

    NARCIS (Netherlands)

    Gavras, A.; Belaunde, M.; Ferreira Pires, L.; Andrade Almeida, J.P.; van Sinderen, M.J.; Ferreira Pires, L.

    2004-01-01

    This paper proposes a development methodology for distributed applications based on the principles and concepts of the Model-Driven Architecture (MDA). The paper identifies phases and activities of an MDA-based development trajectory, and defines the roles and products of each activity in accordance

  6. Towards an MDA-based development methodology for distributed applications

    NARCIS (Netherlands)

    van Sinderen, Marten J.; Gavras, A.; Belaunde, M.; Ferreira Pires, Luis; Andrade Almeida, João

    2004-01-01

    This paper proposes a development methodology for distributed applications based on the principles and concepts of the Model-Driven Architecture (MDA). The paper identifies phases and activities of an MDA-based development trajectory, and defines the roles and products of each activity in accordance

  7. Improved rapid prototyping methodology for MPEG-4 IC development

    Science.gov (United States)

    Tang, Clive K. K.; Moseler, Kathy; Levi, Sami

    1998-12-01

    One important factor in deciding the success of a new consumer product or integrated circuit is minimized time-to- market. A rapid prototyping methodology that encompasses algorithm development in the hardware design phase will have great impact on reducing time-to-market. In this paper, a proven hardware design methodology and a novel top-down design methodology based on Frontier Design's DSP Station tool are described. The proven methodology was used during development of the MC149570 H.261/H.263 video codec manufactured by Motorola. This paper discusses an improvement to this method to create an integrated environment for both system and hardware development, thereby further reducing the time-to-market. The software tool chosen is DSP Station tool by Frontier Design. The rich features of DSP Station tool will be described and then it will be shown how these features may be useful in designing from algorithm to silicon. How this methodology may be used in the development of a new MPEG4 Video Communication ASIC will be outlined. A brief comparison with a popular tool, Signal Processing WorkSystem tool by Cadence, will also be given.

  8. A Conceptual Decision Methodology for High Technology Transfer Assessment.

    Science.gov (United States)

    1982-05-01

    review and provide input within given time periods on selected technologies. The basic industrial export control mechanism continues to be centered in...Department of Commerce is the center of the export control system, it is by no means predominate in the control of all exports. True, it is a key...Department of State endorsed the venture as, "in the national interest." The technology was promised during the Nixon- Pompidou Summit in the Azores. Without

  9. AND TECHNOLOGY FOR NATIONAL DEVELOPMENT

    African Journals Online (AJOL)

    women should be part and parcel of her science and technology development. Nige- rian's effort .... based courses in University of Nigeria alone in 2000/2003 session. University of. 19 .... der, physical disability, limited English language ability.

  10. Methodology for Web Services Adoption Based on Technology Adoption Theory and Business Process Analyses

    Institute of Scientific and Technical Information of China (English)

    AN Liping; YAN Jianyuan; TONG Lingyun

    2008-01-01

    Web services use an emerging service-oriented architecture for distributed computing. Many organizations are either in the process of adopting web services technology or evaluating this option for incorporation into their enterprise information architectures. Implementation of this new technology requires careful assessment of the needs and capabilities of an organization to formulate adoption strategies. This paper presents a methodology for web services adoption based on technology adoption theory and business process analyses. The methodology suggests that strategies, business areas, and functions within an organization should be considered based on the existing organizational information technology status during the process of adopting web services to support the business needs and requirements.

  11. Methodology for development of risk indicators for offshore platforms

    Energy Technology Data Exchange (ETDEWEB)

    Oeien, K.; Sklet, S. [SINTEF Industrial Management Safety and Reliability (Norway)

    1999-09-01

    This paper presents a generic methodology for development of risk indicators for petroleum installations and a specific set of risk indicators established for one offshore platform. The risk indicators should be used to control the risk during operation of platforms. The methodology is purely risk-based and the basis for development of risk indicators is the platform specific quantitative risk analysis (QRA). In order to identify high risk contributing factors, platform personnel are asked to assess whether and how much the risk influencing factors will change. A brief comparison of probabilistic safety assessment (PSA) for nuclear power plants and quantitative risk analysis (QRA) for petroleum platforms is also given. (au)

  12. Mechatronic Developement of New Products Oriented to the Available Technological Capability

    Directory of Open Access Journals (Sweden)

    Genovevo Morejón Vizcaíno

    2011-10-01

    Full Text Available This paper proposes a technological innovation methodology denominated "Mechatronic development of new products oriented to the available technological capacity". It is shown as a study case of the development of hydromotors with radial pistons.

  13. Multichip module technology development

    Energy Technology Data Exchange (ETDEWEB)

    Kapustinsky, J.S.; Boissevain, J.G.; Muck, R.C.; Smith, G.D.; Wong-Swanson, B.G.; Ziock, H.J.

    1997-10-01

    This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). A Multichip Module (MCM) was designed and submitted for fabrication to the Lockheed Martin foundry using a licensed process called High Density Interconnect (HDI). The HDI process uses thin film techniques to create circuit interconnect patterns on multiple layers of dielectric film which are deposited directly on top of unpackaged electronic die. This results in an optimally small package that approaches the area of the bare die themselves. This project tested the capability of the Lockheed Martin foundry to produce, in an HDI process, a complex mixed-mode (analog and digital) circuit on a single MCM substrate.

  14. Insensitive control technology development

    Science.gov (United States)

    Harvey, C. A.; Pope, R. E.

    1978-01-01

    THe investigation of two insensitive controller synthesis techniques was reported. The finite dimensional inverse approach produces a time varying insensitive controller and/or parameter identifier by constructing inverse functions derived from a finite number of input output pair relationships. The MD/IM concept relies on the information matrix theory that was developed in the estimation and identification field. The MD/IM synthesis technique is based on the hypothesis that minimizing the information matrix will reduce system identifiability and consequently system sensitivity to uncertain parameters. The controllers designed with both techniques were evaluated on a realistic C-5A aircraft flight control problem. Results indicate that the FDI controller is more suited to trajectory type problems because of its time varying nature. The MD/IM controller performed as well as the top-rated controllers of the initial effort and has direct application to aircraft flight control problems.

  15. Virtual Astronomy, Information Technology, and the New Scientific Methodology

    CERN Document Server

    Djorgovski, S G

    2005-01-01

    All sciences, including astronomy, are now entering the era of information abundance. The exponentially increasing volume and complexity of modern data sets promises to transform the scientific practice, but also poses a number of common technological challenges. The Virtual Observatory concept is the astronomical community's response to these challenges: it aims to harness the progress in information technology in the service of astronomy, and at the same time provide a valuable testbed for information technology and applied computer science. Challenges broadly fall into two categories: data handling (or "data farming"), including issues such as archives, intelligent storage, databases, interoperability, fast networks, etc., and data mining, data understanding, and knowledge discovery, which include issues such as automated clustering and classification, multivariate correlation searches, pattern recognition, visualization in highly hyperdimensional parameter spaces, etc., as well as various applications of ...

  16. Working Environment and Technological Development

    DEFF Research Database (Denmark)

    Clausen, Christian; Nielsen, Klaus T.; Jensen, Per Langaa

    1997-01-01

    The paper describes the purpose, themes, overarching research questions and specific projects of the programme: Working Environment and Technological Development. The major research themes are:1) Management concepts and the working environment, which considers the visions and their and their conc......The paper describes the purpose, themes, overarching research questions and specific projects of the programme: Working Environment and Technological Development. The major research themes are:1) Management concepts and the working environment, which considers the visions...... and their and their concept of working environment2) Technology renewal, which considers the role of the working environment in connection with the development and use of concrete technologies3) Working environment planning, which considers the existing efforts to place the working environment in a planning process....

  17. Light Water Reactor Sustainability Program: Digital Technology Business Case Methodology Guide

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lawrie, Sean [ScottMadden, Inc., Raleigh, NC (United States); Hart, Adam [ScottMadden, Inc., Raleigh, NC (United States); Vlahoplus, Chris [ScottMadden, Inc., Raleigh, NC (United States)

    2014-09-01

    The Department of Energy’s (DOE’s) Light Water Reactor Sustainability Program aims to develop and deploy technologies that will make the existing U.S. nuclear fleet more efficient and competitive. The program has developed a standard methodology for determining the impact of new technologies in order to assist nuclear power plant (NPP) operators in building sound business cases. The Advanced Instrumentation, Information, and Control (II&C) Systems Technologies Pathway is part of the DOE’s Light Water Reactor Sustainability (LWRS) Program. It conducts targeted research and development (R&D) to address aging and reliability concerns with the legacy instrumentation and control and related information systems of the U.S. operating light water reactor (LWR) fleet. This work involves two major goals: (1) to ensure that legacy analog II&C systems are not life-limiting issues for the LWR fleet and (2) to implement digital II&C technology in a manner that enables broad innovation and business improvement in the NPP operating model. Resolving long-term operational concerns with the II&C systems contributes to the long-term sustainability of the LWR fleet, which is vital to the nation’s energy and environmental security. The II&C Pathway is conducting a series of pilot projects that enable the development and deployment of new II&C technologies in existing nuclear plants. Through the LWRS program, individual utilities and plants are able to participate in these projects or otherwise leverage the results of projects conducted at demonstration plants. Performance advantages of the new pilot project technologies are widely acknowledged, but it has proven difficult for utilities to derive business cases for justifying investment in these new capabilities. Lack of a business case is often cited by utilities as a barrier to pursuing wide-scale application of digital technologies to nuclear plant work activities. The decision to move forward with funding usually hinges on

  18. The Keystone Approach: Integration of Methodology and Technology

    Science.gov (United States)

    Siadat, M. Vali; Peterson, Euguenia; Oseledets, Cyrill; Wang, Ming-Jer; Zhang, Guo Quan

    2012-01-01

    This article is the result of a comprehensive research study investigating the impact of computer-learning technology as well as the impact of a synergistic teaching approach (Keystone Method) on developmental mathematics classes at the college level. The study focused on mathematics skills of elementary and intermediate algebra students and…

  19. Environmental assessment of digestate treatment technologies using LCA methodology.

    Science.gov (United States)

    Vázquez-Rowe, Ian; Golkowska, Katarzyna; Lebuf, Viooltje; Vaneeckhaute, Céline; Michels, Evi; Meers, Erik; Benetto, Enrico; Koster, Daniel

    2015-09-01

    The production of biogas from energy crops, organic waste and manure has augmented considerably the amounts of digestate available in Flanders. This has pushed authorities to steadily introduce legislative changes to promote its use as a fertilising agent. There is limited arable land in Flanders, which entails that digestate has to compete with animal manure to be spread. This forces many anaerobic digestion plants to further treat digestate in such a way that it can either be exported or the nitrogen be removed. Nevertheless, the environmental impact of these treatment options is still widely unknown, as well as the influence of these impacts on the sustainability of Flemish anaerobic digestion plants in comparison to other regions where spreading of raw digestate is allowed. Despite important economic aspects that must be considered, the use of Life Cycle Assessment (LCA) is suggested in this study to identify the environmental impacts of spreading digestate directly as compared to four different treatment technologies. Results suggest relevant environmental gains when the digestate mix is treated using the examined conversion technologies prior to spreading, although important trade-offs between impact categories were observed and discussed. The promising results of digestate conversion technologies suggest that further LCA analyses should be performed to delve into, for instance, the appropriateness to shift to nutrient recovery technologies rather than digestate conversion treatments.

  20. Synthesizing Soft Systems Methodology and Human Performance Technology

    Science.gov (United States)

    Scott, Glen; Winiecki, Donald J.

    2012-01-01

    Human performance technology (HPT), like other concepts, models, and frameworks that we use to describe the world in which we live and the way we organize ourselves to accomplish valuable activities, is built from paradigms that were fresh and relevant at the time it was conceived and from the fields of study from which it grew. However, when the…

  1. Design Based Research Methodology for Teaching with Technology in English

    Science.gov (United States)

    Jetnikoff, Anita

    2015-01-01

    Design based research (DBR) is an appropriate method for small scale educational research projects involving collaboration between teachers, students and researchers. It is particularly useful in collaborative projects where an intervention is implemented and evaluated in a grounded context. The intervention can be technological, or a new program…

  2. NPA4K development system using object-oriented methodology

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Kwang Seong; Hahn, Do Hee

    2000-11-01

    NPA4K consists of module programs with several components for various functions. Software components have to be developed systematically by compartment criteria and design method. In this paper, the understandings of a typical Object-Oriented Methodology , UML(Unified Modeling Language), the procedure for NPA4K program development and the architecture for long-term development of NPA4K are introduced.

  3. Service Innovation Methodologies II : How can new product development methodologies be applied to service innovation and new service development? : Report no 2 from the TIPVIS-project

    OpenAIRE

    Nysveen, Herbjørn; Pedersen, Per E.; Aas, Tor Helge

    2007-01-01

    This report presents various methodologies used in new product development and product innovation and discusses the relevance of these methodologies for service development and service innovation. The service innovation relevance for all of the methodologies presented is evaluated along several service specific dimensions, like intangibility, inseparability, heterogeneity, perishability, information intensity, and co-creation. The methodologies discussed are mainly collect...

  4. Service Innovation Methodologies II : How can new product development methodologies be applied to service innovation and new service development? : Report no 2 from the TIPVIS-project

    OpenAIRE

    Nysveen, Herbjørn; Pedersen, Per E.; Aas, Tor Helge

    2007-01-01

    This report presents various methodologies used in new product development and product innovation and discusses the relevance of these methodologies for service development and service innovation. The service innovation relevance for all of the methodologies presented is evaluated along several service specific dimensions, like intangibility, inseparability, heterogeneity, perishability, information intensity, and co-creation. The methodologies discussed are mainly collect...

  5. Development of a novel methodology for indoor emission source identification

    DEFF Research Database (Denmark)

    Han, K.H.; Zhang, J.S.; Knudsen, H.N.

    2011-01-01

    -line analytical device. The methodology based on signal processing principles was developed by employing the method of multiple regression least squares (MRLS) and a normalization technique. Samples of nine typical building materials were tested individually and in combination, including carpet, ceiling material...

  6. A Fault-tolerant Development Methodology for Industrial Control Systems

    DEFF Research Database (Denmark)

    Izadi-Zamanabadi, Roozbeh; Thybo, C.

    2004-01-01

    and logically sound manner. This paper presents the employe fault-tolerant development methodology and highlights steps, which have been essential for achieving complete and consistent monitoring capabilities. Fault diagnosis for a commercial refrigeration system is treated as a case-study....

  7. Development of Management Methodology for Engineering Production Quality

    Science.gov (United States)

    Gorlenko, O.; Miroshnikov, V.; Borbatc, N.

    2016-04-01

    The authors of the paper propose four directions of the methodology developing the quality management of engineering products that implement the requirements of new international standard ISO 9001:2015: the analysis of arrangement context taking into account stakeholders, the use of risk management, management of in-house knowledge, assessment of the enterprise activity according to the criteria of effectiveness

  8. Research Methodology on Language Development from a Complex Systems Perspective

    Science.gov (United States)

    Larsen-Freeman, Diane; Cameron, Lynne

    2008-01-01

    Changes to research methodology motivated by the adoption of a complexity theory perspective on language development are considered. The dynamic, nonlinear, and open nature of complex systems, together with their tendency toward self-organization and interaction across levels and timescales, requires changes in traditional views of the functions…

  9. Prioritization Methodology for Development of Required Operational Capabilities

    Science.gov (United States)

    2010-04-01

    Cours d’économie politique professé à l’université de Lausanne, 3 vol., 1896-7. 4 Pareto, V., (1935), The Mind and Society [Trattato Di Sociologia ...and Applications: A State-of-the- Art Survey, Springer-Verlag, New York. Prioritization Methodology for Development of Required Operational

  10. Titanium Aluminide Casting Technology Development

    Science.gov (United States)

    Bünck, Matthias; Stoyanov, Todor; Schievenbusch, Jan; Michels, Heiner; Gußfeld, Alexander

    2017-08-01

    Titanium aluminide alloys have been successfully introduced into civil aircraft engine technology in recent years, and a significant order volume increase is expected in the near future. Due to its beneficial buy-to-fly ratio, investment casting bears the highest potential for cost reduction of all competing production technologies for TiAl-LPTB. However, highest mechanical properties can be achieved by TiAl forging. In view of this, Access e.V. has developed technologies for the production of TiAl investment cast parts and TiAl die cast billets for forging purposes. While these parts meet the highest requirements, establishing series production and further optimizing resource and economic efficiency are present challenges. In order to meet these goals, Access has recently been certified according to aircraft standards, aiming at qualifying parts for production on technology readiness level 6. The present work gives an overview of the phases of development and certification.

  11. Survey of Long-Term Technology Forecasting Methodologies

    Science.gov (United States)

    2002-11-01

    betting scores at horse races (Ref. 11). The RAND research was directed at improving the use of expert predictions in policy - making. Procedures were... policy formulation, but we have no way of knowing whether it did. Much of the thinking was heavily oriented toward then-current problems, such as the...asked to put themselves into a future time frame in which some technology is assumed to be commonplace. Then, the group is asked to “ backcast ” to

  12. ADVANCING TECHNOLOGY AND METHODOLOGY TO STREAMLINE ENVIRONMENTAL COMPLIANCE

    Energy Technology Data Exchange (ETDEWEB)

    Ben Grunewald; Paul Jehn

    2002-11-15

    By early 2000, fifteen oil and gas State Agencies were using RBDMS or a RBDMS utility to handle a significant amount or all of their data management needs. There are three additional State slated to begin implementation this year. There are an additional twelve State agencies that are not utilizing this technology that have proven to be very useful for so many other States. This project will allow for the base RBDMS install in all State oil and gas agency that desire it.

  13. Problems of method of technology assessment. A methodological analysis; Methodenprobleme des Technology Assessment; Eine methodologische Analyse

    Energy Technology Data Exchange (ETDEWEB)

    Zimmermann, V.

    1993-03-01

    The study undertakes to analyse the theoretical and methodological structure of Technology Assessment (TA). It is based on a survey of TA studies which provided an important condition for theoreticall sound statements on methodological aspects of TA. It was established that the main basic theoretical problems of TA are in the field of dealing with complexity. This is also apparent in the constitution of problems, the most elementary and central approach of TA. Scientifically founded constitution of problems and the corresponding construction of models call for interdisciplinary scientific work. Interdisciplinarity in the TA research process is achieved at the level of virtual networks, these networks being composed of individuals suited to teamwork. The emerging network structures have an objective-organizational and an ideational basis. The objective-organizational basis is mainly the result of team composition and the external affiliations of the team members. The ideational basis of the virtual network is represented by the team members` mode of thinking, which is individually located at a multidisciplinary level. The theoretical `skeleton` of the TA knowledge system, which is represented by process knowledge based linkage structures, can be generated and also processed in connection with the knowledge on types of problems, areas of analysis and procedures to deal with complexity. Within this process, disciplinary knowledge is a necessary but not a sufficient condition. Metatheoretical and metadisciplinary knowledge and the correspondingly processes complexity of models are the basis for the necessary methodological awareness, that allows TA to become designable as a research procedure. (orig./HP) [Deutsch] Die Studie stellt sich die Aufgabe, die theoretische und methodische Struktur des Technology Assessment (TA) zu analysieren. Sie fusst auf Erhebungen, die bei Technology-Assessment-Studien vorgenommen wurden und die wesentliche Voraussetzungen fuer

  14. Methodological Capacity within the Field of "Educational Technology" Research: An Initial Investigation

    Science.gov (United States)

    Bulfin, Scott; Henderson, Michael; Johnson, Nicola F.; Selwyn, Neil

    2014-01-01

    The academic study of educational technology is often characterised by critics as methodologically limited. In order to test this assumption, the present paper reports on data collected from a survey of 462 "research active" academic researchers working in the broad areas of educational technology and educational media. The paper…

  15. An Adaptive Design Methodology for Reduction of Product Development Risk

    CERN Document Server

    Pakala, Hara Gopal Mani; Kvsvn, Dr Raju; Khan, Dr Ibrahim; 10.5121/ijasuc.2011.2303

    2011-01-01

    Embedded systems interaction with environment inherently complicates understanding of requirements and their correct implementation. However, product uncertainty is highest during early stages of development. Design verification is an essential step in the development of any system, especially for Embedded System. This paper introduces a novel adaptive design methodology, which incorporates step-wise prototyping and verification. With each adaptive step product-realization level is enhanced while decreasing the level of product uncertainty, thereby reducing the overall costs. The back-bone of this frame-work is the development of Domain Specific Operational (DOP) Model and the associated Verification Instrumentation for Test and Evaluation, developed based on the DOP model. Together they generate functionally valid test-sequence for carrying out prototype evaluation. With the help of a case study 'Multimode Detection Subsystem' the application of this method is sketched. The design methodologies can be compar...

  16. Selecting a software development methodology. [of digital flight control systems

    Science.gov (United States)

    Jones, R. E.

    1981-01-01

    The state of the art analytical techniques for the development and verification of digital flight control software is studied and a practical designer oriented development and verification methodology is produced. The effectiveness of the analytic techniques chosen for the development and verification methodology are assessed both technically and financially. Technical assessments analyze the error preventing and detecting capabilities of the chosen technique in all of the pertinent software development phases. Financial assessments describe the cost impact of using the techniques, specifically, the cost of implementing and applying the techniques as well as the relizable cost savings. Both the technical and financial assessment are quantitative where possible. In the case of techniques which cannot be quantitatively assessed, qualitative judgements are expressed about the effectiveness and cost of the techniques. The reasons why quantitative assessments are not possible will be documented.

  17. Development of Radiochemical Separation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eil Hee; Kim, K. W.; Yang, H. B. (and others)

    2007-06-15

    This project of the second phase was aimed at the development of basic unit technologies for advanced partitioning, and the application tests of pre-developed partitioning technologies for separation of actinides by using a simulated multi-component radioactive waste containing Am, Np, Tc, U and so on. The goals for recovery yield of TRU, and for purity of Tc are high than 99% and about 99%, respectively. The work scopes and contents were as follows. 1). For the development of basic unit technologies for advanced partitioning. 1. Development of technologies for co-removal of TRU and for mutual separation of U and TRU with a reduction-complexation reaction. 2. Development of extraction system for high-acidity co-separation of An(+3) and Ln(+3) and its radiolytic evaluation. 3. Synthesis of extractants for the selective separation of An(+3) and its relevant extraction system development. 4. Development of a hybrid system for the recovery of noble metals and its continuous separation tests. 5. Development of electrolytic system for the decompositions of N-NO3 and N-NH3 compounds to nitrogen gas. 2). For the application test of pre-developed partitioning technologies for the separation of actinide elements in a simulated multi-component solution equivalent to HLW level. 1. Co-separation of Tc, Np and U by a (TBP-TOA)/NDD system. 2. Mutual-separation of Am, Cm and RE elements by a (Zr-DEHPA)/NDD system. All results will be used as the fundamental data for the development of advanced partitioning process in the future.

  18. Development Risk Methodology for Whole Systems Trade Analysis

    Science.gov (United States)

    2016-08-01

    potential risks, and estimated development times associated with each technology. The established WSTAT framework utilizes elicitation techniques with...and stakeholder value in order to inform and potentially influence requirements documents and associated specifications. The WSTA tool (WSTAT) can...exploitation, requirements definition, early cost informed trades, requirements analysis, Analysis of Alternatives (AoA), contractor trades, and technology

  19. Methodology of teaching of the discipline "Endocrinology" with the use of case-technologies

    OpenAIRE

    Лахно, Ольга Вікторівна

    2016-01-01

    Aim of research – to theoretically ground, elaborate and partially verify the methodology of teaching of the discipline “Internal medicine” using case-technologies in KNMU.Object of research – the process of teaching students of the higher educational institutions. Subject of research – the methodology of teaching of the discipline “Internal medicine” in KNMU using case-technologies.In the work were analyzed the possibilities of use of case-technologies of learning in the process of teaching ...

  20. Assessing quality in software development: An agile methodology approach

    OpenAIRE

    V. Rodríguez-Hernández; M.C. Espino-Gudiño; J.L. González-Pérez; J. Gudiño-Bazaldúa; Victor Castano

    2015-01-01

    A novel methodology, result of 10 years of in-field testing, which makes possible the convergence of different types of models and quality standards for Engineering and Computer Science Faculties, is presented. Since most software-developing companies are small and medium sized, the projects developed must focuson SCRUM and Extreme Programming (XP), opposed to a RUP, which is quite heavy, as well as on Personal Software Process (PSP) and Team Software Process (TSP), which provide students wit...

  1. The Development of Methodology to Support Comprehensive Approach: TMC

    Science.gov (United States)

    2014-05-02

    methodology components, each of which supports a different spectrum of multidisciplinary teamwork . The TMC development has been an iterative process and it...program that aims at exploring new ideas with high potential but high risks. The concept IMAGE developed in this project aimed at improving the...increasing understanding of a complex situation and enabling individuals to share their comprehension. IMAGE is a software toolset concept proposed

  2. Applying of component system development in object methodology, case study

    Directory of Open Access Journals (Sweden)

    Milan Mišovič

    2013-01-01

    Full Text Available To create computarization target software as a component system has been a very strong requirement for the last 20 years of software developing. Finally, the architectural components are self-contained units, presenting not only partial and overall system behavior, but also cooperating with each other on the basis of their interfaces. Among others, components have allowed flexible modification of processes the behavior of which is the foundation of components behavior without changing the life of the component system. On the other hand, the component system makes it possible, at design time, to create numerous new connections between components and thus creating modified system behaviors. This all enables the company management to perform, at design time, required behavioral changes of processes in accordance with the requirements of changing production and market.The development of software which is generally referred to as SDP (Software Development Process contains two directions. The first one, called CBD (Component–Based Development, is dedicated to the development of component–based systems CBS (Component–based System, the second target is the development of software under the influence of SOA (Service–Oriented Architecture. Both directions are equipped with their different development methodologies. The subject of this paper is only the first direction and application of development of component–based systems in its object–oriented methodologies. The requirement of today is to carry out the development of component-based systems in the framework of developed object–oriented methodologies precisely in the way of a dominant style. In some of the known methodologies, however, this development is not completely transparent and is not even recognized as dominant. In some cases, it is corrected by the special meta–integration models of component system development into an object methodology.This paper presents a case study

  3. Advanced Mirror & Modelling Technology Development

    Science.gov (United States)

    Effinger, Michael; Stahl, H. Philip; Abplanalp, Laura; Maffett, Steven; Egerman, Robert; Eng, Ron; Arnold, William; Mosier, Gary; Blaurock, Carl

    2014-01-01

    The 2020 Decadal technology survey is starting in 2018. Technology on the shelf at that time will help guide selection to future low risk and low cost missions. The Advanced Mirror Technology Development (AMTD) team has identified development priorities based on science goals and engineering requirements for Ultraviolet Optical near-Infrared (UVOIR) missions in order to contribute to the selection process. One key development identified was lightweight mirror fabrication and testing. A monolithic, stacked, deep core mirror was fused and replicated twice to achieve the desired radius of curvature. It was subsequently successfully polished and tested. A recently awarded second phase to the AMTD project will develop larger mirrors to demonstrate the lateral scaling of the deep core mirror technology. Another key development was rapid modeling for the mirror. One model focused on generating optical and structural model results in minutes instead of months. Many variables could be accounted for regarding the core, face plate and back structure details. A portion of a spacecraft model was also developed. The spacecraft model incorporated direct integration to transform optical path difference to Point Spread Function (PSF) and between PSF to modulation transfer function. The second phase to the project will take the results of the rapid mirror modeler and integrate them into the rapid spacecraft modeler.

  4. Decision Gate Process for Assessment of a Technology Development Portfolio

    Science.gov (United States)

    Kohli, Rajiv; Fishman, Julianna; Hyatt, Mark

    2012-01-01

    The NASA Dust Management Project (DMP) was established to provide technologies (to TRL 6 development level) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, which will reduce life cycle cost and risk, and will increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product is either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

  5. Lost circulation technology development status

    Energy Technology Data Exchange (ETDEWEB)

    Glowka, D.A.; Schafer, D.M.; Loeppke, G.E.; Scott, D.D.; Wernig, M.D.; Wright, E.K.

    1992-07-01

    Lost circulation is the loss of drilling fluid from the wellbore to fractures or pores in the rock formation. In geothermal drilling, lost circulation is often a serious problem that contributes greatly to the cost of the average geothermal well. The Lost Circulation Technology Development Program is sponsored at Sandia National Laboratories by the US Department of Energy. The goal of the program is to reduce lost circulation costs by 30--50% through the development of mitigation and characterization technology. This paper describes the technical progress made in this program during the period April 1991--March 1992. 8 refs.

  6. Baseline Study Methodology for Future Phases of Research on Nuclear Power Plant Control Room Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Le Blanc, Katya Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bower, Gordon Ross [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hill, Rachael Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States); Spielman, Zachary Alexander [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rice, Brandon Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-07-01

    In order to provide a basis for industry adoption of advanced technologies, the Control Room Upgrades Benefits Research Project will investigate the benefits of including advanced technologies as part of control room modernization This report describes the background, methodology, and research plan for the first in a series of full-scale studies to test the effects of advanced technology in NPP control rooms. This study will test the effect of Advanced Overview Displays in the partner Utility’s control room simulator

  7. Methodology to develop and evaluate a semantic representation for NLP.

    Science.gov (United States)

    Irwin, Jeannie Y; Harkema, Henk; Christensen, Lee M; Schleyer, Titus; Haug, Peter J; Chapman, Wendy W

    2009-11-14

    Natural language processing applications that extract information from text rely on semantic representations. The objective of this paper is to describe a methodology for creating a semantic representation for information that will be automatically extracted from textual clinical records. We illustrate two of the four steps of the methodology in this paper using the case study of encoding information from dictated dental exams: (1) develop an initial representation from a set of training documents and (2) iteratively evaluate and evolve the representation while developing annotation guidelines. Our approach for developing and evaluating a semantic representation is based on standard principles and approaches that are not dependent on any particular domain or type of semantic representation.

  8. Industrial environmental performance assessment: developing a referential methodology

    Directory of Open Access Journals (Sweden)

    Andréia Marize Rodrigues

    2015-02-01

    Full Text Available This study aimed to the development of a methodological framework for the broadly evaluation of environmental performance in industrial companies. The methodological framework developed is composed for nine aspects of evaluation, namely: Organizational Management, Human Resources, Product, Production Process, Physical Facilities, Emissions, Social Development, Economic and Financial Aspect and Media. For each of these aspects were created evaluation indicators, a total of 35 indicators. Each indicator is accompanied by a numeric ID, a description, a generic goal, and its metric unit of measure and a scale to measure the care of each indicator. As an illustration, the proposed framework was applied to the evaluation in an industrial metal-mechanical company, the latter achieved environmental performance of 84.0%.

  9. Methodological approach to crime scene investigation: the dangers of technology

    Science.gov (United States)

    Barnett, Peter D.

    1997-02-01

    The visitor to any modern forensic science laboratory is confronted with equipment and processes that did not exist even 10 years ago: thermocyclers to allow genetic typing of nanogram amounts of DNA isolated from a few spermatozoa; scanning electron microscopes that can nearly automatically detect submicrometer sized particles of molten lead, barium and antimony produced by the discharge of a firearm and deposited on the hands of the shooter; and computers that can compare an image of a latent fingerprint with millions of fingerprints stored in the computer memory. Analysis of populations of physical evidence has permitted statistically minded forensic scientists to use Bayesian inference to draw conclusions based on a priori assumptions which are often poorly understood, irrelevant, or misleading. National commissions who are studying quality control in DNA analysis propose that people with barely relevant graduate degrees and little forensic science experience be placed in charge of forensic DNA laboratories. It is undeniable that high- tech has reversed some miscarriages of justice by establishing the innocence of a number of people who were imprisoned for years for crimes that they did not commit. However, this papers deals with the dangers of technology in criminal investigations.

  10. Development of radioisotope tracer technology

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Joon Ha; Lee, Myun Joo; Jung, Sung Hee; Park, Soon Chul; Lim, Dong Soon; Kim, Jae Ho; Lee, Jae Choon; Lee, Doo Sung; Cho, Yong Suk; Shin, Sung Kuan

    2000-04-01

    The purpose of this study is to develop the radioisotope tracer technology, which can be used in solving industrial and environmental problems and to build a strong tracer group to support the local industries. In relation to the tracer technology in 1999, experiments to estimate the efficiencies of a sludge digester of a waste water treatment plant and a submerged biological reactor of a dye industry were conducted. As a result, the tracer technology for optimization of facilities related to wastewater treatment has been developed and is believed to contribute to improve their operation efficiency. The quantification of the experimental result was attempted to improve the confidence of tracer technology by ECRIN program which basically uses the MCNP simulation principle. Using thin layer activation technique, wear of tappet shim was estimated. Thin layer surface of a tappet shim was irradiated by proton beam and the correlation between the measured activity loss and the amount of wear was established. The equipment was developed to adjust the energy of proton which collides with the surface of tappet. The tracer project team has participated into the tracer test for estimating the efficiency of RFCC system in SK cooperation. From the experiment the tracer team has obtained the primary elements to be considered for judging the efficiency of RFCC unit. By developing the tracer techniques to test huge industrial units like RFCC, the tracer team will be able to support the local industries that require technical services to solve any urgent trouble. (author)

  11. Technology and Motor Ability Development

    Science.gov (United States)

    Wang, Lin; Lang, Yong; Luo, Zhongmin

    2014-01-01

    As a new member joining the technology family, active video games have been developed to promote physical exercise. This working-in-progress paper shares an ongoing project on examining the basic motor abilities that are enhanced through participating in commercially available active video games. [For the full proceedings see ED557181.

  12. Technological Development and Fisheries Management

    NARCIS (Netherlands)

    Eigaard, O.R.; Marchal, P.; Gislason, H.; Rijnsdorp, A.D.

    2014-01-01

    Many marine fish stocks are overexploited and considerable overcapacity exists in fishing fleets worldwide. One of the reasons for the imbalance between resource availability and fishing capacity is technological development, which continuously increases the efficiency of the vessels—a mechanism

  13. An International Development Technology Center

    Science.gov (United States)

    Morgan, Robert P.

    1969-01-01

    Main focus of the Center is "the application of science and technology to the solution of problems faced by people in less-developed areas of the world. Adapted from paper presented at ASEE Annual Meeting, The Pennsylvania State University, June, 1969. (Author/WM)

  14. Technological Development and Fisheries Management

    NARCIS (Netherlands)

    Eigaard, O.R.; Marchal, P.; Gislason, H.; Rijnsdorp, A.D.

    2014-01-01

    Many marine fish stocks are overexploited and considerable overcapacity exists in fishing fleets worldwide. One of the reasons for the imbalance between resource availability and fishing capacity is technological development, which continuously increases the efficiency of the vessels—a mechanism ref

  15. Methodology and technological aspects of the flexible substrate preparation for ink-jet printing technology

    Science.gov (United States)

    Tarapata, Grzegorz; Marzecki, Michał

    2013-10-01

    The ink-jet printing technology becomes especially promising for wide volume of production of cheap sensors, consumable electronics and other dedicated applications of everyday life like smart packaging, smart textiles, smart labels, etc. To achieve this goal new materials compatible with ink-jet printing should be developed. Currently on the market there is a growing number of inks with different properties, but their use requires many tests related to its printability and their interaction with other materials. The paper presents technological problems that are encountered by people associated with fabrication of various devices with using of inkjet printing techniques. Results presented in the paper show the influence of surface preparation techniques on the quality of achieved shapes, the impact of other materials already deposited and the impact of another external factors. During carried out experiments the printer Dimatix DMP 2831 and several inks base on nanosilver or dielectric UV curable was used.

  16. Development of test methodology for dynamic mechanical analysis instrumentation

    Science.gov (United States)

    Allen, V. R.

    1982-08-01

    Dynamic mechanical analysis instrumentation was used for the development of specific test methodology in the determination of engineering parameters of selected materials, esp. plastics and elastomers, over a broad range of temperature with selected environment. The methodology for routine procedures was established with specific attention given to sample geometry, sample size, and mounting techniques. The basic software of the duPont 1090 thermal analyzer was used for data reduction which simplify the theoretical interpretation. Clamps were developed which allowed 'relative' damping during the cure cycle to be measured for the fiber-glass supported resin. The correlation of fracture energy 'toughness' (or impact strength) with the low temperature (glassy) relaxation responses for a 'rubber-modified' epoxy system was negative in result because the low-temperature dispersion mode (-80 C) of the modifier coincided with that of the epoxy matrix, making quantitative comparison unrealistic.

  17. An integrated impact assessment and weighting methodology: evaluation of the environmental consequences of computer display technology substitution.

    Science.gov (United States)

    Zhou, Xiaoying; Schoenung, Julie M

    2007-04-01

    Computer display technology is currently in a state of transition, as the traditional technology of cathode ray tubes is being replaced by liquid crystal display flat-panel technology. Technology substitution and process innovation require the evaluation of the trade-offs among environmental impact, cost, and engineering performance attributes. General impact assessment methodologies, decision analysis and management tools, and optimization methods commonly used in engineering cannot efficiently address the issues needed for such evaluation. The conventional Life Cycle Assessment (LCA) process often generates results that can be subject to multiple interpretations, although the advantages of the LCA concept and framework obtain wide recognition. In the present work, the LCA concept is integrated with Quality Function Deployment (QFD), a popular industrial quality management tool, which is used as the framework for the development of our integrated model. The problem of weighting is addressed by using pairwise comparison of stakeholder preferences. Thus, this paper presents a new integrated analytical approach, Integrated Industrial Ecology Function Deployment (I2-EFD), to assess the environmental behavior of alternative technologies in correlation with their performance and economic characteristics. Computer display technology is used as the case study to further develop our methodology through the modification and integration of various quality management tools (e.g., process mapping, prioritization matrix) and statistical methods (e.g., multi-attribute analysis, cluster analysis). Life cycle thinking provides the foundation for our methodology, as we utilize a published LCA report, which stopped at the characterization step, as our starting point. Further, we evaluate the validity and feasibility of our methodology by considering uncertainty and conducting sensitivity analysis.

  18. Advanced chemistry of monolayers at interfaces trends in methodology and technology

    CERN Document Server

    Imae, Toyoko

    2007-01-01

    Advanced Chemistry of Monolayers at Interfaces describes the advanced chemistry of monolayers at interfaces. Focusing on the recent trends of methodology and technology, which are indispensable in monolayer science. They are applied to monolayers of surfactants, amphiphiles, polymers, dendrimers, enzymes, and proteins, which serve many uses.Introduces the methodologies of scanning probe microscopy, surface force instrumentation, surface spectroscopy, surface plasmon optics, reflectometry, and near-field scanning optical microscopy. Modern interface reaction method, lithographic tech

  19. Forecasting for strengthening technological development

    Directory of Open Access Journals (Sweden)

    Aida Mayerly Fúquene Montañez

    2010-05-01

    Full Text Available Producing technological innovation is currently one of the key items in being more competitive. However, production sectors are facing great challenges, including analysing a large amount of available technological and market information regarding the en- vironment for strategic decision-making and being able to launch themselves onto the market with technological developments bringing the desired economic returns. Several tools for analysing information have emerged for reducing the uncertainty of tech- nological and market changes. This article provides conceptual and reflective elements so that forecasting strengthens technolo- gical development (TD. Forecasting is initially proposed as being one of the future methods of analysis having a significant im- pact on decision-making, mainly within the field of economics but which could be extrapolated to making a contribution to TD. The techniques which have been the recent instrument for collecting information for producing forecasting are described, as is work about the concept of surveillance/monitoring and the processes used for coordinating such approaches. It can thus be sta- ted that they provide an excellent basis for strengthening TD by providing platforms for new or improved developments in pro- cesses or products. Reflection about these aspects provides perspectives for implementing technological forecasting (TF in pro- duction systems so that they obtain efficient and concrete results via deterministic methods as input in decision-making in techno- logy regarding its middle- and long-term competitiveness.

  20. Technology development life cycle processes.

    Energy Technology Data Exchange (ETDEWEB)

    Beck, David Franklin

    2013-05-01

    This report and set of appendices are a collection of memoranda originally drafted in 2009 for the purpose of providing motivation and the necessary background material to support the definition and integration of engineering and management processes related to technology development. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. As presented herein, the material begins with a survey of open literature perspectives on technology development life cycles, including published data on %E2%80%9Cwhat went wrong.%E2%80%9D The main thrust of the material presents a rational expose%CC%81 of a structured technology development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of the systems engineering process. The material concludes with a discussion on the use of multiple measures to assess technology maturity, including consideration of the viewpoint of potential users.

  1. Latest developments on safety analysis methodologies at the Juzbado plant

    Energy Technology Data Exchange (ETDEWEB)

    Zurron-Cifuentes, Oscar; Ortiz-Trujillo, Diego; Blanco-Fernandez, Luis A. [ENUSA Industrias Avanzadas S. A., Juzbado Nuclear Fuel Fabrication Plant, Ctra. Salamanca-Ledesma, km. 26, 37015 Juzbado, Salamanca (Spain)

    2010-07-01

    Over the last few years the Juzbado Plant has developed and implemented several analysis methodologies to cope with specific issues regarding safety management. This paper describes the three most outstanding of them, so as to say, the Integrated Safety Analysis (ISA) project, the adaptation of the MARSSIM methodology for characterization surveys of radioactive contamination spots, and the programme for the Systematic Review of the Operational Conditions of the Safety Systems (SROCSS). Several reasons motivated the decision to implement such methodologies, such as Regulator requirements, operational experience and of course, the strong commitment of ENUSA to maintain the highest standards of nuclear industry on all the safety relevant activities. In this context, since 2004 ENUSA is undertaking the ISA project, which consists on a systematic examination of plant's processes, equipment, structures and personnel activities to ensure that all relevant hazards that could result in unacceptable consequences have been adequately evaluated and the appropriate protective measures have been identified. On the other hand and within the framework of a current programme to ensure the absence of radioactive contamination spots on unintended areas, the MARSSIM methodology is being applied as a tool to conduct the radiation surveys and investigation of potentially contaminated areas. Finally, the SROCSS programme was initiated earlier this year 2009 to assess the actual operating conditions of all the systems with safety relevance, aiming to identify either potential non-conformities or areas for improvement in order to ensure their high performance after years of operation. The following paragraphs describe the key points related to these three methodologies as well as an outline of the results obtained so far. (authors)

  2. Inspection Workshop-6: OSI Technologies: Methodologies and Techniques for Application

    Energy Technology Data Exchange (ETDEWEB)

    Krioutchenkov, V.; Shchukin, V.; Sweeney, J.J.

    2000-09-14

    On-Site Inspection (OSI) Workshop-6 met 26-30 June 2000 in Vienna, hosted by the Provisional Technical Secretariat (PTS) of the CTBT Organization. The purpose of the workshop was to provide guidance on OSI Operational Manual (OM) development for Working Group B (WGB) of the CTBT preparatory Commission (PrepCom) in the general areas of equipment and logistics. The two main sessions of this workshop, titled ''OSI Equipment: Development of Functional and Operational Requirements, Specifications and Application Procedures'' and ''OSI Logistics: Continued Work on Standing Arrangements, Status of Inspectors and Support Equipment Issues'' reflected this focus. For this workshop, the schedule of work was divided into two parts: The first half of the week were sessions with formal paper presentations and discussion; the latter half of the week used two smaller subgroups to focus on and discuss separately equipment and logistics issues. Drawing heavily on the results of the five previous workshops, these subgroups produced material to be considered by Working Group B. This provisional material is intended to advance the process of equipment definition and procurement and establish procedures for logistics that can be incorporated into the OSI Operational Manual. The participants agreed that using subgroups in this workshop was an especially effective mechanism for discussion of different expert opinion on technical issues, and that having access to material presented at the previous five OSI workshops was particularly valuable.

  3. Technologies, Methodologies and Challenges in Network Intrusion Detection and Prevention Systems

    Directory of Open Access Journals (Sweden)

    Nicoleta STANCIU

    2013-01-01

    Full Text Available This paper presents an overview of the technologies and the methodologies used in Network Intrusion Detection and Prevention Systems (NIDPS. Intrusion Detection and Prevention System (IDPS technologies are differentiated by types of events that IDPSs can recognize, by types of devices that IDPSs monitor and by activity. NIDPSs monitor and analyze the streams of network packets in order to detect security incidents. The main methodology used by NIDPSs is protocol analysis. Protocol analysis requires good knowledge of the theory of the main protocols, their definition, how each protocol works.

  4. Development of a statistically based access delay timeline methodology.

    Energy Technology Data Exchange (ETDEWEB)

    Rivera, W. Gary; Robinson, David Gerald; Wyss, Gregory Dane; Hendrickson, Stacey M. Langfitt

    2013-02-01

    The charter for adversarial delay is to hinder access to critical resources through the use of physical systems increasing an adversarys task time. The traditional method for characterizing access delay has been a simple model focused on accumulating times required to complete each task with little regard to uncertainty, complexity, or decreased efficiency associated with multiple sequential tasks or stress. The delay associated with any given barrier or path is further discounted to worst-case, and often unrealistic, times based on a high-level adversary, resulting in a highly conservative calculation of total delay. This leads to delay systems that require significant funding and personnel resources in order to defend against the assumed threat, which for many sites and applications becomes cost prohibitive. A new methodology has been developed that considers the uncertainties inherent in the problem to develop a realistic timeline distribution for a given adversary path. This new methodology incorporates advanced Bayesian statistical theory and methodologies, taking into account small sample size, expert judgment, human factors and threat uncertainty. The result is an algorithm that can calculate a probability distribution function of delay times directly related to system risk. Through further analysis, the access delay analyst or end user can use the results in making informed decisions while weighing benefits against risks, ultimately resulting in greater system effectiveness with lower cost.

  5. Development of methodology to prioritise wildlife pathogens for surveillance.

    Science.gov (United States)

    McKenzie, Joanna; Simpson, Helen; Langstaff, Ian

    2007-09-14

    We developed and evaluated a methodology to prioritise pathogens for a wildlife disease surveillance strategy in New Zealand. The methodology, termed 'rapid risk analysis' was based on the import risk analysis framework recommended by the Office Internationale des Epizooties (OIE), and involved: hazard identification, risk estimation, and ranking of 48 exotic and 34 endemic wildlife pathogens. The risk assessment was more rapid than a full quantitative assessment through the use of a semi-quantitative approach to score pathogens for probability of entry to NZ (release assessment), likelihood of spread (exposure assessment) and consequences in free-living wildlife, captive wildlife, humans, livestock and companion animals. Risk was estimated by multiplying the scores for the probability of entry to New Zealand by the likelihood of spread by the consequences for free-living wildlife, humans and livestock. The rapid risk analysis methodology produced scores that were sufficiently differentiated between pathogens to be useful for ranking them on the basis of risk. Ranking pathogens on the basis of the risk estimate for each population sector provided an opportunity to identify the priorities within each sector alone thus avoiding value-laden comparisons between sectors. Ranking pathogens across all three population sectors by summing the risk estimate for each sector provided a comparison of total risk which may be useful for resource allocation decisions at national level. Ranking pathogens within each wildlife taxonomic group using the total risk estimate was most useful for developing specific surveillance strategies for each group.

  6. Development of safety analysis technology for LMR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Y. B.; Kwon, Y. M.; Suk, S. D. [and others

    2005-03-01

    The MATRA-LMR-FB has been developed internally for the damage prevention as well as the safety assessment during a channel blockage accident and, as a the result, the quality of the code becomes comparable to that developed in the leading countries. For a code-to-code comparison, KAERI could have access to the SASSYS-1 through a bilateral collaboration between KAERI and ANL. The study could bring into the reliability improvements both on the reactivity models in the SSC-K and on the SSC-K prediction capability. It finally leads to the completion of the SSC-K version 1.3 resulting from the qualitative and quantitative code-to-code comparison. The preliminary analysis for a metal fueled LMR could also become possible with the MELT-III and the VENUS-II, which had originally been developed for the HCDA analysis with an oxidized fuel, by developing the relevant models For the development of the safety evaluation technology, the safety limits have been set up, and the analyses of the internal and external channel blockages in an assembly have also been performed. Besides, the more reliable analysis results on the key design concepts could be obtained by way of the methodology improvement resulting from the qualitative and quantitative comparison study. For an efficient and systematic control of the main project, the integration of the developed technologies and the establishment of their data base have been pursued. It has gone through the development of the process control with taking account of interfaces among the sub-projects, the overall coordination of the developed technologies, the data base for the design products, and so on.

  7. An automated methodology development. [software design for combat simulation

    Science.gov (United States)

    Hawley, L. R.

    1985-01-01

    The design methodology employed in testing the applicability of Ada in large-scale combat simulations is described. Ada was considered as a substitute for FORTRAN to lower life cycle costs and ease the program development efforts. An object-oriented approach was taken, which featured definitions of military targets, the capability of manipulating their condition in real-time, and one-to-one correlation between the object states and real world states. The simulation design process was automated by the problem statement language (PSL)/problem statement analyzer (PSA). The PSL/PSA system accessed the problem data base directly to enhance the code efficiency by, e.g., eliminating non-used subroutines, and provided for automated report generation, besides allowing for functional and interface descriptions. The ways in which the methodology satisfied the responsiveness, reliability, transportability, modifiability, timeliness and efficiency goals are discussed.

  8. New Methodology for the Development of Chromatographic Methods

    OpenAIRE

    Rozet, Eric; Debrus, Benjamin; Lebrun, Pierre; Boulanger, B.; Hubert, Philippe

    2011-01-01

    As defined by ICH [1] and FDA, Quality by Design (QbD) stands for “a systematic approach to development that begins with predefined objectives and emphasizes product and process understanding and process control, based on sound science and quality risk management”. A risk–based QbD–compliant approach is proposed for the robust development of analytical methods. This methodology based on Design of Experiments (DoE) to study the experimental domain models the retention times at the beginning, t...

  9. Development of Remote Operations Technology

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Ji Sub; Kwon, Sung Gyu; Kim, Ki Ho; Park, Byung Suk; Park Young Soo; Lee, Won Sang [Korea Atomic Energry Research Institute, Taejon (Korea, Republic of)

    1994-12-01

    To control the swing of the load suspended to overhead crane, various devices, anti-swing control algorithms, and experimental and pilot-scaled cranes have been developed since 1989. In this year, the problems of control algorithm are identified and new algorithms which adopt an acceleration profile planning, a velocity feedback control, a fuzzy control, and an anti-swing/position control methods are developed. Also, the report includes the program of transferring the anti-swing overhead crane technology to industry. And, to improve the cask handling safety and to increase the cask handling capacity of a facility, a Remote Cask Grappling and Lid Unbolting Device (RCG=LUD) which is suspended to an anti-swing crane and remotely controlled to hold the cask and unbolt the cask lid is developed. the controller using PMAC is tested for successful remote operations. Technology for this device has the potential for developing other technologies, such as nuclear reactor maintenance and repair. 62 refs., 73 figs., 27 tabs.

  10. Advanced Modular Inverter Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Adam Szczepanek

    2006-02-04

    Electric and hybrid-electric vehicle systems require an inverter to convert the direct current (DC) output of the energy generation/storage system (engine, fuel cells, or batteries) to the alternating current (AC) that vehicle propulsion motors use. Vehicle support systems, such as lights and air conditioning, also use the inverter AC output. Distributed energy systems require an inverter to provide the high quality AC output that energy system customers demand. Today's inverters are expensive due to the cost of the power electronics components, and system designers must also tailor the inverter for individual applications. Thus, the benefits of mass production are not available, resulting in high initial procurement costs as well as high inverter maintenance and repair costs. Electricore, Inc. (www.electricore.org) a public good 501 (c) (3) not-for-profit advanced technology development consortium assembled a highly qualified team consisting of AeroVironment Inc. (www.aerovironment.com) and Delphi Automotive Systems LLC (Delphi), (www.delphi.com), as equal tiered technical leads, to develop an advanced, modular construction, inverter packaging technology that will offer a 30% cost reduction over conventional designs adding to the development of energy conversion technologies for crosscutting applications in the building, industry, transportation, and utility sectors. The proposed inverter allows for a reduction of weight and size of power electronics in the above-mentioned sectors and is scalable over the range of 15 to 500kW. The main objective of this program was to optimize existing AeroVironment inverter technology to improve power density, reliability and producibility as well as develop new topology to reduce line filter size. The newly developed inverter design will be used in automotive and distribution generation applications. In the first part of this program the high-density power stages were redesigned, optimized and fabricated. One of the main

  11. Engineering research, development and technology FY99

    Energy Technology Data Exchange (ETDEWEB)

    Langland, R T

    2000-02-01

    The growth of computer power and connectivity, together with advances in wireless sensing and communication technologies, is transforming the field of complex distributed systems. The ability to deploy large numbers of sensors with a rapid, broadband communication system will enable high-fidelity, near real-time monitoring of complex systems. These technological developments will provide unprecedented insight into the actual performance of engineered and natural environment systems, enable the evolution of many new types of engineered systems for monitoring and detection, and enhance our ability to perform improved and validated large-scale simulations of complex systems. One of the challenges facing engineering is to develop methodologies to exploit the emerging information technologies. Particularly important will be the ability to assimilate measured data into the simulation process in a way which is much more sophisticated than current, primarily ad hoc procedures. The reports contained in this section on the Center for Complex Distributed Systems describe activities related to the integrated engineering of large complex systems. The first three papers describe recent developments for each link of the integrated engineering process for large structural systems. These include (1) the development of model-based signal processing algorithms which will formalize the process of coupling measurements and simulation and provide a rigorous methodology for validation and update of computational models; (2) collaborative efforts with faculty at the University of California at Berkeley on the development of massive simulation models for the earth and large bridge structures; and (3) the development of wireless data acquisition systems which provide a practical means of monitoring large systems like the National Ignition Facility (NIF) optical support structures. These successful developments are coming to a confluence in the next year with applications to NIF structural

  12. Risk assessment methodology applied to counter IED research & development portfolio prioritization

    Energy Technology Data Exchange (ETDEWEB)

    Shevitz, Daniel W [Los Alamos National Laboratory; O' Brien, David A [Los Alamos National Laboratory; Zerkle, David K [Los Alamos National Laboratory; Key, Brian P [Los Alamos National Laboratory; Chavez, Gregory M [Los Alamos National Laboratory

    2009-01-01

    In an effort to protect the United States from the ever increasing threat of domestic terrorism, the Department of Homeland Security, Science and Technology Directorate (DHS S&T), has significantly increased research activities to counter the terrorist use of explosives. More over, DHS S&T has established a robust Counter-Improvised Explosive Device (C-IED) Program to Deter, Predict, Detect, Defeat, and Mitigate this imminent threat to the Homeland. The DHS S&T portfolio is complicated and changing. In order to provide the ''best answer'' for the available resources, DHS S&T would like some ''risk based'' process for making funding decisions. There is a definite need for a methodology to compare very different types of technologies on a common basis. A methodology was developed that allows users to evaluate a new ''quad chart'' and rank it, compared to all other quad charts across S&T divisions. It couples a logic model with an evidential reasoning model using an Excel spreadsheet containing weights of the subjective merits of different technologies. The methodology produces an Excel spreadsheet containing the aggregate rankings of the different technologies. It uses Extensible Logic Modeling (ELM) for logic models combined with LANL software called INFTree for evidential reasoning.

  13. Multi-Layer Integration Methodology for development of ICT competences in SMEs

    DEFF Research Database (Denmark)

    Nunez, Heilyn Camacho

    2013-01-01

    To modern enterprises, information technology has a multi-value, such as improving products, customer satisfaction and quality; it also facilitates administrative processes, reduces cost and improves competitiveness, among other things. Taking advantage of information and communication technologies...... (ICT) is a challenge for many small and medium-sized enterprises (SMEs). As it is clear the important role of the SMEs for the countries development, this paper proposes a methodology that aims to interconnect external forces that can facilitate the removal or mitigation of some of the constraints...

  14. Technology development and technology gap among Latin American countries

    OpenAIRE

    Serrano Moya, Edgar David

    2014-01-01

    Objective: to study the source of the technology gaps amongst some Latin American countries and to identify whether a regional system of technological progress may be strengthened. ethodology: technology development within some Latin America countries was researched based on the technology frontier concept. In order to do that, the technological advancement of such countries was compared using standard variables and institutional systems. The concept and scope of the technology frontier, whic...

  15. Proteomics: technology development and applications.

    Science.gov (United States)

    Walton, S Patrick; Jayaraman, Arul

    2009-02-01

    Technology development in, and the application of, proteomics are emerging areas among chemical engineers and others who presented at the 2008 American Institute of Chemical Engineers (AIChE) Annual Meeting. Overall, the centennial meeting offered a broad current perspective on the discipline of chemical engineering as it enters its second century. Biomedical and biochemical engineering continue to grow as important facets of the discipline. Within these, the value and applicability of proteomics were demonstrated in a number of interesting presentations. This year, as in the recent past, the AIChE Annual Meeting was held in conjunction with the American Electrophoresis Society Annual Meeting. American Electrophoresis Society presenters offered further academic and industrial viewpoints on the still-developing role of proteomics and proteomic technologies in biological and clinical analyses.

  16. A Referential Methodology for Education on Sustainable Tourism Development

    Directory of Open Access Journals (Sweden)

    Burcin Hatipoglu

    2014-08-01

    Full Text Available Sustainable tourism has the potential of contributing to local development while protecting the natural environment and preserving cultural heritage. Implementation of this form of tourism requires human resources that can assume effective leadership in sustainable development. The purpose of the international student program, described in this paper, was to develop and implement an educational methodology to fulfill this need. The study, which was developed and applied by two universities, took place in August 2013, in the study setting of Kastamonu, Turkey. The effectiveness of the program was measured by pre- and post-surveys using the Global Citizenship Scale developed by Morais and Ogden. The findings document a change in intercultural communication, global knowledge and political voice dimensions of the scale.

  17. Methodology for oil field development; Metodologia para o desenvolvimento de campos de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Galeano, Yadira Diaz

    1998-07-01

    The main scope of this work is to study and develop a methodology which allows the elaboration of project for oil field development. There fore it is necessary to consider to consider the integration of the human, technological and economical issues that are important parameters in the engineering project. The spiral concept was applied for the project in order to coordinate, in a reasonable and logical way, the activities involved in the field development, as well as the hierarchical analysis method for the decision making process. The development of an oil field is divided in viability study, preliminary project, final project, project implementation, production and field abandonment cycles. The main components for each cycle are external aspects, environmental criteria, reservoir management, and drilling, completion and well workover, production systems, exportation systems, and risk and economical analysis. The proposed methodology establishes a general scheme for planning and it presents applicable procedures for any field. (author)

  18. A New Methodology of Design and Development of Serious Games

    Directory of Open Access Journals (Sweden)

    André F. S. Barbosa

    2014-01-01

    Full Text Available The development of a serious game requires perfect knowledge of the learning domain to obtain the desired results. But it is also true that this may not be enough to develop a successful serious game. First of all, the player has to feel that he is playing a game where the learning is only a consequence of the playing actions. Otherwise, the game is viewed as boring and not as a fun activity and engaging. For example, the player can catch some items in the scenario and then separate them according to its type (i.e., recycle them. Thus, the main action for player is catching the items in the scenario where the recycle action is a second action, which is viewed as a consequence of the first action. Sometimes, the game design relies on a detailed approach based on the ideas of the developers because some educational content are difficult to integrate in the games, while maintaining the fun factor in the first place. In this paper we propose a new methodology of design and development of serious games that facilitates the integration of educational contents in the games. Furthermore, we present a serious game, called “Clean World”, created using this new methodology.

  19. Evaluating Colombian SMEs’ technological innovation: Part 1: conceptual basis, evaluation methodology and characterisation of innovative companies

    Directory of Open Access Journals (Sweden)

    Óscar Fernando Castellanos Domínguez

    2010-04-01

    Full Text Available Innovative processes currently constitute one of the most important alternatives for increasing organisations’ levels of competitiveness and productivity. The Colombian state (being conscious of this has generated mechanisms aimed at encouraging technological and innovative development activities in SMEs, as was the case with the Colombian Prize for Entrepreneurial Technological Innovation for SME (Innova 2006. The experience acquired through the technical evaluation of such prize was a valuable element for identifying Colombian MSMSC innovative characteristics and trends. The present article seeks to establish the current state of innovation in SMEs from expe- rience gained when evaluating and awarding the Innova prize; a frame of reference concerning innovation and design, the methodology used for evaluating the prize and some general statistics regarding the results obtained in 2006 are thus presented. A future publication will give the factors influencing innovation taking geographical regions, sectors and impact as reference. Such results revealed innovative initiatives in strategic sectors such as computer science and services, the leadership of cities such as Bogota and MedellIn and the need for producing clear guidelines for incorporating process and product design into being part of the innovative process.

  20. Rate of force development: physiological and methodological considerations.

    Science.gov (United States)

    Maffiuletti, Nicola A; Aagaard, Per; Blazevich, Anthony J; Folland, Jonathan; Tillin, Neale; Duchateau, Jacques

    2016-06-01

    The evaluation of rate of force development during rapid contractions has recently become quite popular for characterising explosive strength of athletes, elderly individuals and patients. The main aims of this narrative review are to describe the neuromuscular determinants of rate of force development and to discuss various methodological considerations inherent to its evaluation for research and clinical purposes. Rate of force development (1) seems to be mainly determined by the capacity to produce maximal voluntary activation in the early phase of an explosive contraction (first 50-75 ms), particularly as a result of increased motor unit discharge rate; (2) can be improved by both explosive-type and heavy-resistance strength training in different subject populations, mainly through an improvement in rapid muscle activation; (3) is quite difficult to evaluate in a valid and reliable way. Therefore, we provide evidence-based practical recommendations for rational quantification of rate of force development in both laboratory and clinical settings.

  1. Development and Attestation of Gamma-Ray Measurement Methodologies for use by Rostekhnadzor Inspectors in the Russian Federation

    Energy Technology Data Exchange (ETDEWEB)

    Jeff Sanders

    2006-09-01

    Development and attestation of gamma-ray non-destructive assay measurement methodologies for use by inspectors of the Russian Federal Service for Environmental, Technological, and Nuclear Oversight (Rostekhnadzor, formerly Gosatomnadzor or GAN), as well as for use by Russian nuclear facilities, has been completed. Specifically, a methodology utilizing the gamma-ray multi group analysis (MGA) method for determining plutonium isotopic composition has been developed, while existing methodologies to determining uranium enrichment and isotopic composition have been revised to make them more appropriate to the material types and conditions present in nuclear facilities in the Russian Federation. This paper will discuss the development and revision of these methodologies, the metrological characteristics of the final methodologies, as well as the limitations and concerns specific to the utilization of these analysis methods in the Russian Federation.

  2. Disruption of Information Technology Projects: The Reactive Decoupling of Project Management Methodologies

    Science.gov (United States)

    Schmitz, Kurt W.

    2013-01-01

    Information Technology projects have migrated toward two dominant Project Management (PM) methodologies. Plan-driven practices provide organizational control through highly structured plans, schedules, and specifications that facilitate oversight by hierarchical bureaucracies. In contrast, agile practices emphasize empowered teams using flexible…

  3. Studying Marriage and Family Therapists in the 21st Century: Methodological and Technological Issues

    Science.gov (United States)

    Northey, William F., Jr.

    2005-01-01

    In this article, I present data from two waves of research on demographic characteristics and practice patterns of marriage and family therapists (MFTs) conducted in 2000 and 2002. The research focuses on the methodological and technological issues in studying this population. Specifically, an online survey with MFTs obtained lower response rates…

  4. A food quality management research methodology integrating technological and managerial theories

    NARCIS (Netherlands)

    Luning, P.A.; Marcelis, W.J.

    2009-01-01

    In this article it is argued how the complexity of food quality management combined with the high requirements on food quality requires a specific research methodology. It is concluded that food quality management research has to deal with two quite different paradigms, the one from technological

  5. A food quality management research methodology integrating technological and managerial theories

    NARCIS (Netherlands)

    Luning, P.A.; Marcelis, W.J.

    2009-01-01

    In this article it is argued how the complexity of food quality management combined with the high requirements on food quality requires a specific research methodology. It is concluded that food quality management research has to deal with two quite different paradigms, the one from technological an

  6. Disruption of Information Technology Projects: The Reactive Decoupling of Project Management Methodologies

    Science.gov (United States)

    Schmitz, Kurt W.

    2013-01-01

    Information Technology projects have migrated toward two dominant Project Management (PM) methodologies. Plan-driven practices provide organizational control through highly structured plans, schedules, and specifications that facilitate oversight by hierarchical bureaucracies. In contrast, agile practices emphasize empowered teams using flexible…

  7. Methodological Guidelines for Reducing the Complexity of Data Warehouse Development for Transactional Blood Bank Systems.

    Science.gov (United States)

    Takecian, Pedro L; Oikawa, Marcio K; Braghetto, Kelly R; Rocha, Paulo; Lucena, Fred; Kavounis, Katherine; Schlumpf, Karen S; Acker, Susan; Carneiro-Proietti, Anna B F; Sabino, Ester C; Custer, Brian; Busch, Michael P; Ferreira, João E

    2013-06-01

    Over time, data warehouse (DW) systems have become more difficult to develop because of the growing heterogeneity of data sources. Despite advances in research and technology, DW projects are still too slow for pragmatic results to be generated. Here, we address the following question: how can the complexity of DW development for integration of heterogeneous transactional information systems be reduced? To answer this, we proposed methodological guidelines based on cycles of conceptual modeling and data analysis, to drive construction of a modular DW system. These guidelines were applied to the blood donation domain, successfully reducing the complexity of DW development.

  8. Photovoltaic-system costing-methodology development. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1982-07-01

    Presented are the results of a study to expand the use of standardized costing methodologies in the National Photovoltaics Program. The costing standards, which include SAMIS for manufacturing costs and M and D for marketing and distribution costs, have been applied to concentrator collectors and power-conditioning units. The M and D model was also computerized. Finally, a uniform construction cost-accounting structure was developed for use in photovoltaic test and application projects. The appendices contain example cases which demonstrate the use of the models.

  9. Methodological issues in clinical drug development for essential tremor.

    Science.gov (United States)

    Carranza, Michael A; Snyder, Madeline R; Elble, Rodger J; Boutzoukas, Angelique E; Zesiewicz, Theresa A

    2012-01-01

    Essential tremor (ET) is one of the most common tremor disorders in the world. Despite this, only two medications have received Level A recommendations from the American Academy of Neurology to treat it (primidone and propranolol). Even though these medications provide relief to a large group of ET patients, up to 50% of patients are non-responders. Additional medications to treat ET are needed. This review discusses some of the methodological issues that should be addressed for quality clinical drug development in ET.

  10. Methodologies Developed for EcoCity Related Projects: New Borg El Arab, an Egyptian Case Study

    Directory of Open Access Journals (Sweden)

    Carmen Antuña-Rozado

    2016-08-01

    Full Text Available The aim of the methodologies described here is to propose measures and procedures for developing concepts and technological solutions, which are adapted to the local conditions, to build sustainable communities in developing countries and emerging economies. These methodologies are linked to the EcoCity framework outlined by VTT Technical Research Centre of Finland Ltd. for sustainable community and neighbourhood regeneration and development. The framework is the result of a long experience in numerous EcoCity related projects, mainly Nordic and European in scope, which has been reformulated in recent years to respond to the local needs in the previously mentioned countries. There is also a particular emphasis on close collaboration with local partners and major stakeholders. In order to illustrate how these methodologies can support EcoCity concept development and implementation, results from a case study in Egypt will be discussed. The referred case study relates to the transformation of New Borg El Arab (NBC, near Alexandria, into an EcoCity. The viability of the idea was explored making use of different methodologies (Roadmap, Feasibility Study, and Residents Energy Survey and Building Consumption Assessment and considering the Residential, Commercial/Public Facilities, Industrial, Services/Utilities, and Transport sectors.

  11. Advances in Artificial Neural Networks - Methodological Development and Application

    Science.gov (United States)

    Artificial neural networks as a major soft-computing technology have been extensively studied and applied during the last three decades. Research on backpropagation training algorithms for multilayer perceptron networks has spurred development of other neural network training algorithms for other ne...

  12. Tools and methodologies for evaluation of energy chains and for technology perspective

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    The challenge of climate change implies to accelerate the pace of innovation and consequently to lead long-term basic and applied research with a planning horizon of several decades, far beyond the conditions of current market development. In such a context, the availability of efficient decision-aiding tools and methodologies, far more advanced than those presently operated, is a critical stake.The different categories of tools will have to be more complementary by design and the overall decision-aiding processes will have to integrate numerous system analysis approaches in order to take into account more deeply all economical, environmental and societal impacts. The general goal of the workshop was to address this imperative to break new ground in decision-aiding tools and methodologies to help us to prioritize energy R and D options, comparing the needs jointly with the state of art and with the potentiality of breakthroughs, mainly in environmental and social sciences. The expected outcome was to characterize the scope and limits of existing decision-aiding processes, to highlight the perspectives towards more advanced new ones, and, as such, to foster interdisciplinary cooperation by linking more closely social and environmental sciences with energy socio-economic modelling research. The workshop included four parts. The first three addressed specialized sessions, outlining three different categories of tools. The fourth one was dedicated to the perspective of a combined use of these complementary tools in order to have methodologies available for covering the whole field of energy and social sciences issues. After this last session, there was a closing synthesis of the two day's work on the challenges to take up and the ways to go. This document gathers the transparencies of the following presentations: H2A Project/Evaluation of hydrogen chains (G. Sverdrup); E3DataBase/Evaluation of hydrogen chains (J. Schindler); Micro-economic modelling for evaluation

  13. Spatial Development Modeling Methodology Application Possibilities in Vilnius

    Directory of Open Access Journals (Sweden)

    Lina Panavaitė

    2017-05-01

    Full Text Available In order to control the continued development of high-rise buildings and their irreversible visual impact on the overall silhouette of the city, the great cities of the world introduced new methodological principles to city’s spatial development models. These methodologies and spatial planning guidelines are focused not only on the controlled development of high-rise buildings, but on the spatial modelling of the whole city by defining main development criteria and estimating possible consequences. Vilnius city is no exception, however the re-establishment of independence of Lithuania caused uncontrolled urbanization process, so most of the city development regulations emerged as a consequence of unmanaged processes of investors’ expectations legalization. The importance of consistent urban fabric as well as conservation and representation of city’s most important objects gained attention only when an actual threat of overshadowing them with new architecture along with unmanaged urbanization in the city center or urban sprawl at suburbia, caused by land-use projects, had emerged. Current Vilnius’ spatial planning documents clearly define urban structure and key development principles, however the definitions are relatively abstract, causing uniform building coverage requirements for territories with distinct qualities and simplifying planar designs which do not meet quality standards. The overall quality of urban architecture is not regulated. The article deals with current spatial modeling methods, their individual parts, principles, the criteria for quality assessment and their applicability in Vilnius. The text contains an outline of possible building coverage regulations and impact assessment criteria for new development. The article contains a compendium of requirements for high-quality spatial planning and building design.

  14. Methodological questions for the post-2015 development agenda.

    Directory of Open Access Journals (Sweden)

    Jacopo Bonan

    2014-07-01

    Full Text Available In 2015, the Millennium Development Goals are due to end. Academics, practitioners and the general public are eager to see which development agenda will take their place and a variety of different organizations are currently elaborating proposals for the next “round” of goals and targets. Instead of investigating possible topics of the upcoming agenda, we focus on methodological questions that – according to our view – will play a major role in the definition and implementation of future development goals. We focus on the elaboration of some key questions that should be addressed in the realm of poverty and inequality measurement, the definition of targets, the ability to consider complexity and evidence-based policy making.

  15. The SIMRAND methodology - Simulation of Research and Development Projects

    Science.gov (United States)

    Miles, R. F., Jr.

    1984-01-01

    In research and development projects, a commonly occurring management decision is concerned with the optimum allocation of resources to achieve the project goals. Because of resource constraints, management has to make a decision regarding the set of proposed systems or tasks which should be undertaken. SIMRAND (Simulation of Research and Development Projects) is a methodology which was developed for aiding management in this decision. Attention is given to a problem description, aspects of model formulation, the reduction phase of the model solution, the simulation phase, and the evaluation phase. The implementation of the considered approach is illustrated with the aid of an example which involves a simplified network of the type used to determine the price of silicon solar cells.

  16. Developing a science of land change: Challenges and methodological issues

    Science.gov (United States)

    Rindfuss, Ronald R.; Walsh, Stephen J.; Turner, B. L.; Fox, Jefferson; Mishra, Vinod

    2004-01-01

    Land-change science has emerged as a foundational element of global environment change and sustainability science. It seeks to understand the human and environment dynamics that give rise to changed land uses and covers, not only in terms of their type and magnitude but their location as well. This focus requires the integration of social, natural, and geographical information sciences. Each of these broad research communities has developed different ways to enter the land-change problem, each with different means of treating the locational specificity of the critical variables, such as linking the land manager to the parcel being managed. The resulting integration encounters various data, methodological, and analytical problems, especially those concerning aggregation and inference, land-use pixel links, data and measurement, and remote sensing analysis. Here, these integration problems, which hinder comprehensive understanding and theory development, are addressed. Their recognition and resolution are required for the sustained development of land-change science. PMID:15383671

  17. Methodological Grounds of Formation of the Scorecard of Diagnostics of the Innovation Component of Technological Processes of Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    Zhezhuha Volodymyr Yo.

    2014-01-01

    Full Text Available The goal of the article is development of scientific provisions with respect of methodological specific features of formation of the scorecard of diagnostics of the innovation component of technological processes of industrial enterprises. The article proves fragmentariness of views of theoreticians and practitioners on this problem. It justifies a necessity of formation of these indicators from the point of view of a system approach, consequently, accounting of all interconnections and interdependencies between them, and also coverage of main factors that identify the diagnosed innovation component. Pursuant to result of the study the article specifies system properties of the scorecard of diagnostics of the innovation component of technological processes of industrial enterprises. It reveals a possibility of application of two alternative approaches to formation of this scorecard, and also establishes their advantages and shortcomings. It gives a number of requirements, which have to be met when selecting, developing and forming the scorecard of diagnostics of the innovation component of technological processes of industrial enterprises. It reflects key issues that should form the basis of the methodological approach to formation of this system. It shows typology of indicators of diagnostics of the innovation component of technological processes of industrial enterprises, which gives subjects of diagnostics a possibility to select relevant indicators depending on the set criteria and restrictions. Prospects of further studies in this direction should lie in development of the system of a specific scorecard of diagnostics of each innovation component of technological processes of industrial enterprises with consideration of methodological specific features of its formation described in the article.

  18. Development of DUPIC safeguards technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H. D.; Ko, W. I.; Song, D. Y. [and others

    2000-03-01

    During the first phase of R and D program conducted from 1997 to 1999, nuclear material safeguards studies system were performed on the technology development of DUPIC safeguards system such as nuclear material measurement in bulk form and product form, DUPIC fuel reactivity measurement, near-real-time accountancy, and containment and surveillance system for effective and efficient implementation of domestic and international safeguards obligation. For the nuclear material measurement system, the performance test was finished and received IAEA approval, and now is being used in DUPIC Fuel Fabrication Facility(DFDF) for nuclear material accounting and control. Other systems being developed in this study were already installed in DFDF and being under performance test. Those systems developed in this study will make a contribution not only to the effective implementation of DUPIC safeguards, but also to enhance the international confidence build-up in peaceful use of spent fuel material. (author)

  19. Educational Technology Diffusion in Organizations: A Call for Systemic Vision and Organizational Development

    Science.gov (United States)

    Trentin, Guglielmo

    2012-01-01

    The research and development in Europe of new educational technologies and methodologies is in continuous progress. We are not, however, seeing at the same time an equally wide diffusion of these technologies and methodologies in organizational contexts (Blain, 2011). In short, there is a quite marked difference between the speed with which…

  20. Methodology of citrate-based biomaterial development and application

    Science.gov (United States)

    Tran, M. Richard

    Biomaterials play central roles in modern strategies of regenerative medicine and tissue engineering. Attempts to find tissue-engineered solutions to cure various injuries or diseases have led to an enormous increase in the number of polymeric biomaterials over the past decade. The breadth of new materials arises from the multiplicity of anatomical locations, cell types, and mode of application, which all place application-specific requirements on the biomaterial. Unfortunately, many of the currently available biodegradable polymers are limited in their versatility to meet the wide range of requirements for tissue engineering. Therefore, a methodology of biomaterial development, which is able to address a broad spectrum of requirements, would be beneficial to the biomaterial field. This work presents a methodology of citrate-based biomaterial design and application to meet the multifaceted needs of tissue engineering. We hypothesize that (1) citric acid, a non-toxic metabolic product of the body (Krebs Cycle), can be exploited as a universal multifunctional monomer and reacted with various diols to produce a new class of soft biodegradable elastomers with the flexibility to tune the material properties of the resulting material to meet a wide range of requirements; (2) the newly developed citrate-based polymers can be used as platform biomaterials for the design of novel tissue engineering scaffolding; and (3) microengineering approaches in the form thin scaffold sheets, microchannels, and a new porogen design can be used to generate complex cell-cell and cell-microenvironment interactions to mimic tissue complexity and architecture. To test these hypotheses, we first developed a methodology of citrate-based biomaterial development through the synthesis and characterization of a family of in situ crosslinkable and urethane-doped elastomers, which are synthesized using simple, cost-effective strategies and offer a variety methods to tailor the material properties to

  1. Lunar Dust Mitigation Technology Development

    Science.gov (United States)

    Hyatt, Mark J.; Deluane, Paul B.

    2008-01-01

    NASA s plans for implementing the Vision for Space Exploration include returning to the moon as a stepping stone for further exploration of Mars, and beyond. Dust on the lunar surface has a ubiquitous presence which must be explicitly addressed during upcoming human lunar exploration missions. While the operational challenges attributable to dust during the Apollo missions did not prove critical, the comparatively long duration of impending missions presents a different challenge. Near term plans to revisit the moon places a primary emphasis on characterization and mitigation of lunar dust. Comprised of regolith particles ranging in size from tens of nanometers to microns, lunar dust is a manifestation of the complex interaction of the lunar soil with multiple mechanical, electrical, and gravitational effects. The environmental and anthropogenic factors effecting the perturbation, transport, and deposition of lunar dust must be studied in order to mitigate it s potentially harmful effects on exploration systems. This paper presents the current perspective and implementation of dust knowledge management and integration, and mitigation technology development activities within NASA s Exploration Technology Development Program. This work is presented within the context of the Constellation Program s Integrated Lunar Dust Management Strategy. The Lunar Dust Mitigation Technology Development project has been implemented within the ETDP. Project scope and plans will be presented, along with a a perspective on lessons learned from Apollo and forensics engineering studies of Apollo hardware. This paper further outlines the scientific basis for lunar dust behavior, it s characteristics and potential effects, and surveys several potential strategies for its control and mitigation both for lunar surface operations and within the working volumes of a lunar outpost.

  2. Information Communication Technology Planning in Developing Countries

    Science.gov (United States)

    Malapile, Sandy; Keengwe, Jared

    2014-01-01

    This article explores major issues related to Information Communication Technology (ICT) in education and technology planning. Using the diffusion of innovation theory, the authors examine technology planning opportunities and challenges in Developing countries (DCs), technology planning trends in schools, and existing technology planning models…

  3. Information Communication Technology Planning in Developing Countries

    Science.gov (United States)

    Malapile, Sandy; Keengwe, Jared

    2014-01-01

    This article explores major issues related to Information Communication Technology (ICT) in education and technology planning. Using the diffusion of innovation theory, the authors examine technology planning opportunities and challenges in Developing countries (DCs), technology planning trends in schools, and existing technology planning models…

  4. A methodology for the valuation and selection of adaptable technology portfolios and its application to small and medium airports

    Science.gov (United States)

    Pinon, Olivia J.

    The increase in the types of airspace users (large aircraft, small and regional jets, very light jets, unmanned aerial vehicles, etc.), as well as the very limited number of future new airport development projects are some of the factors that will characterize the next decades in air transportation. These factors, associated with a persistent growth in air traffic will worsen the current gridlock situation experienced at some major airports. As airports are becoming the major capacity bottleneck to continued growth in air traffic, it is therefore primordial to make the most efficient use of the current, and very often, underutilized airport infrastructure. This research thus proposes to address the increase in air traffic demand and resulting capacity issues by considering the implementation of operational concepts and technologies at underutilized airports. However, there are many challenges associated with sustaining the development of this type of airports. First, the need to synchronize evolving technologies with airports’ needs and investment capabilities is paramount. Additionally, it was observed that the evolution of secondary airports, and their needs, is tightly linked to the environment in which they operate. In particular, sensitivity of airports to changes in the dynamics of their environment is important, therefore requiring that the factors that drive the need for technology acquisition be identified and characterized. Finally, the difficulty to evaluate risk and make financially viable decisions, particularly when investing in new technologies, cannot be ignored. This research provides a methodology that addresses these challenges and ensures the sustainability of airport capacity-enhancement investments in a continuously changing environment. In particular, it is articulated around the need to provide decision makers with the capability to valuate and select adaptable technology portfolios to ensure airport financial viability. Hence, the four

  5. Development of a computational methodology for internal dose calculations

    CERN Document Server

    Yoriyaz, H

    2000-01-01

    A new approach for calculating internal dose estimates was developed through the use of a more realistic computational model of the human body and a more precise tool for the radiation transport simulation. The present technique shows the capability to build a patient-specific phantom with tomography data (a voxel-based phantom) for the simulation of radiation transport and energy deposition using Monte Carlo methods such as in the MCNP-4B code. In order to utilize the segmented human anatomy as a computational model for the simulation of radiation transport, an interface program, SCMS, was developed to build the geometric configurations for the phantom through the use of tomographic images. This procedure allows to calculate not only average dose values but also spatial distribution of dose in regions of interest. With the present methodology absorbed fractions for photons and electrons in various organs of the Zubal segmented phantom were calculated and compared to those reported for the mathematical phanto...

  6. Effective methodology to derive strategic decisions from ESA exploration technology roadmaps

    Science.gov (United States)

    Cresto Aleina, Sara; Viola, Nicole; Fusaro, Roberta; Saccoccia, Giorgio

    2016-09-01

    Top priorities in future international space exploration missions regard the achievement of the necessary maturation of enabling technologies, thereby allowing Europe to play a role commensurate with its industrial, operational and scientific capabilities. As part of the actions derived from this commitment, ESA Technology Roadmaps for Exploration represent a powerful tool to prioritise R&D activities in technologies for space exploration and support the preparation of a consistent procurement plan for space exploration technologies in Europe. The roadmaps illustrate not only the technology procurement (to TRL-8) paths for specific missions envisaged in the present timeframe, but also the achievement for Europe of technological milestones enabling operational capabilities and building blocks, essential for current and future Exploration missions. Coordination of requirements and funding sources among all European stakeholders (ESA, EU, National, and Industry) is one of the objectives of these roadmaps, that show also possible application of the technologies beyond space exploration, both at ESA and outside. The present paper describes the activity that supports the work on-going at ESA on the elaboration and update of these roadmaps and related tools, in order to criticise the followed approach and to suggest methodologies of assessment of the Roadmaps, and to derive strategic decision for the advancement of Space Exploration in Europe. After a review of Technology Areas, Missions/Programmes and related building blocks (architectures) and operational capabilities, technology applicability analyses are presented. The aim is to identify if a specific technology is required, applicable or potentially a demonstrator in the building blocks of the proposed mission concepts. In this way, for each technology it is possible to outline one or more specific plans to increase TRL up to the required level. In practice, this translates into two possible solutions: on the one

  7. CHARACTERISTICS OF RESEARCH METHODOLOGY DEVELOPMENT IN SPECIAL EDUCATION AND REHABILITATION

    Directory of Open Access Journals (Sweden)

    Natasha ANGELOSKA-GALEVSKA

    2004-12-01

    Full Text Available The aim of the text is to point out the developmental tendencies in the research methodology of special education and rehabilitation worldwide and in our country and to emphasize the importance of methodological training of students in special education and rehabilitation at the Faculty of Philosophy in Skopje.The achieved scientific knowledge through research is the fundamental pre-condition for development of special education and rehabilitation theory and practice. The results of the scientific work sometimes cause small, insignificant changes, but, at times, they make radical changes. Thank to the scientific researches and knowledge, certain prejudices were rejected. For example, in the sixth decade of the last century there was a strong prejudice that mentally retarded children should be segregated from the society as aggressive and unfriendly ones or the deaf children should not learn sign language because they would not be motivated to learn lip-reading and would hardly adapt. Piaget and his colleagues from Geneva institute were the pioneers in researching this field and they imposed their belief that handicapped children were not handicapped in each field and they had potentials that could be developed and improved by systematic and organized work. It is important to initiate further researches in the field of special education and rehabilitation, as well as a critical analysis of realized researches. Further development of the scientific research in special education and rehabilitation should be a base for education policy on people with disabilities and development of institutional and non-institutional treatment of this population.

  8. Customer Interaction in Software Development: A Comparison of Software Methodologies Deployed in Namibian Software Firms

    CSIR Research Space (South Africa)

    Iyawa, GE

    2016-01-01

    Full Text Available that customer interaction is not the only factor that influences a successful project; teamwork among software developers also plays a role. Hence, Moe et al. (2010) examined teamwork among developers in a Scrum project, using Dickson and Mcintyre’s teamwork...://www.mccormickpcs.com/ images/Waterfall_vs_Agile_Methodology.pdf Moe, N. B., Dingsøyr, T & Dybå, T. (2010) A Teamwork Model for Understanding an Agile Team: A Case Study of a Scrum Project. Information and Software Technology, 52, 480-491. Mohammadi, S., Nikkhahan, B...

  9. APPROACHES TO DEVELOPMENT OF THE METHODOLOGY OF RECONSTRUCTION OF WASTE WATER TREATMENT PLANTS

    Directory of Open Access Journals (Sweden)

    Gogina Elena Sergeevna

    2012-10-01

    WWTPs fail to perform proper treatment due to their being worn-out and obsolete. However a tougher legislation accelerates their reconstruction. Approaches to the WWTP reconstruction should demonstrate a strong economic and technological base. The author proposes a new algorithm for their reconstruction. A sensible combination of the principles of WWTP restructuring, development of new fine wastewater cleaning methods, and assimilation of new materials and chemical agents will help resolve the vital problem of waste water discharge into Russia's water bodies. This is the first methodology of reconstruction of WWTPs developed on the basis of the above concept and supported by practical implementation.

  10. Developing a Design Methodology for Web 2.0 Mediated Learning

    DEFF Research Database (Denmark)

    Georgsen, Marianne; Buus, Lillian; Glud, Louise Nørgaard;

    2010-01-01

    of particular ‘mediating design artefacts’. We discuss what can be viewed as a lack of attention paid to integrating the preferred teaching styles and learning philosophies of practitioners into design tools, and present a particular method for learning design; the COllaborative E-learning Design method (Co......In this paper we discuss the notion of a learning methodology and situate this within the wider frame of learning design or “Designing for Learning”. We discuss existing work within this broad area by trying to categorize different approaches and interpretations and we present our development......Ed). We describe how this method has been adopted as part of a learning methodology building on concepts and models presented in the other symposium papers, in particular those of active, problem based learning and web 2.0-technologies. The challenge of designing on the basis of an explicit learning...

  11. Modelling methodology for assessing the impact of new technology on complex sociotechnical systems

    CSIR Research Space (South Africa)

    Oosthuizen, R

    2014-11-01

    Full Text Available Developing complex sociotechnical systems often involves integrating new technology into existing systems by applying systems engineering processes. This requires an understanding of the problem space and the possible impact of the new technology...

  12. Information technology for sustainable development

    DEFF Research Database (Denmark)

    Holgaard, Jette Egelund; Guerra, Aida; Knoche, Hendrik

    2013-01-01

    from a broader theme to a problem formulation designed to fit the time, discipline and theme of study. In the prospect of Education for Sustainable development (ESD) the students are to move from the conceptually complex field of sustainable development (SD) to a specific formulation of a problem...... that initiate design, implementation and test of ICT for SD. On the empirical level we draw from experiments in autumn 2009 and spring 2013 within the field of Media technology. Observations, text analysis of students’ work as well as reflections from staff has been relied on in order to analyse the practical...... frame, like sustainability, encouraged students to broaden their perspective on stressing economic, environmental as well as social concerns. However, the experiments also showed that interlinking engineering subjects with sustainability is a rather time-consuming task – and some of the students were...

  13. Rapid development of xylanase assay conditions using Taguchi methodology.

    Science.gov (United States)

    Prasad Uday, Uma Shankar; Bandyopadhyay, Tarun Kanti; Bhunia, Biswanath

    2016-11-01

    The present investigation is mainly concerned with the rapid development of extracellular xylanase assay conditions by using Taguchi methodology. The extracellular xylanase was produced from Aspergillus niger (KP874102.1), a new strain isolated from a soil sample of the Baramura forest, Tripura West, India. Four physical parameters including temperature, pH, buffer concentration and incubation time were considered as key factors for xylanase activity and were optimized using Taguchi robust design methodology for enhanced xylanase activity. The main effect, interaction effects and optimal levels of the process factors were determined using signal-to-noise (S/N) ratio. The Taguchi method recommends the use of S/N ratio to measure quality characteristics. Based on analysis of the S/N ratio, optimal levels of the process factors were determined. Analysis of variance (ANOVA) was performed to evaluate statistically significant process factors. ANOVA results showed that temperature contributed the maximum impact (62.58%) on xylanase activity, followed by pH (22.69%), buffer concentration (9.55%) and incubation time (5.16%). Predicted results showed that enhanced xylanase activity (81.47%) can be achieved with pH 2, temperature 50°C, buffer concentration 50 Mm and incubation time 10 min.

  14. Development of essential system technologies for advanced reactor

    Energy Technology Data Exchange (ETDEWEB)

    Bae, Y. Y.; Hwang, Y. D.; Cho, B. H. and others

    1999-03-01

    Basic design of SMART adopts the new advanced technologies which were not applied in the existing 1000MWe PWR. However, the R and D experience on these advanced essential technologies is lacking in domestic nuclear industry. Recently, a research on these advanced technologies has been performed as a part of the mid-and-long term nuclear R and D program, but the research was limited only for the small scale fundamental study. The research on these essential technologies such as helically coiled tube steam generator, self pressurizer, core cooling by natural circulation required for the development of integral reactor SMART have not been conducted in full scale. This project, therefore, was performed for the development of analysis models and methodologies, system analysis and thermal hydraulic experiments on the essential technologies to be applied to the 300MWe capacity of integral reactor SMART and the advanced passive reactor expected to be developed in near future with the emphasis on experimental investigation. (author)

  15. Urban Agglomerations in Regional Development: Theoretical, Methodological and Applied Aspects

    Directory of Open Access Journals (Sweden)

    Andrey Vladimirovich Shmidt

    2016-09-01

    Full Text Available The article focuses on the analysis of the major process of modern socio-economic development, such as the functioning of urban agglomerations. A short background of the economic literature on this phenomenon is given. There are the traditional (the concentration of urban types of activities, the grouping of urban settlements by the intensive production and labour communications and modern (cluster theories, theories of network society conceptions. Two methodological principles of studying the agglomeration are emphasized: the principle of the unity of the spatial concentration of economic activity and the principle of compact living of the population. The positive and negative effects of agglomeration in the economic and social spheres are studied. Therefore, it is concluded that the agglomeration is helpful in the case when it brings the agglomerative economy (the positive benefits from it exceed the additional costs. A methodology for examination the urban agglomeration and its role in the regional development is offered. The approbation of this methodology on the example of Chelyabinsk and Chelyabinsk region has allowed to carry out the comparative analysis of the regional centre and the whole region by the main socio-economic indexes under static and dynamic conditions, to draw the conclusions on a position of the city and the region based on such socio-economic indexes as an average monthly nominal accrued wage, the cost of fixed assets, the investments into fixed capital, new housing supply, a retail turnover, the volume of self-produced shipped goods, the works and services performed in the region. In the study, the analysis of a launching site of the Chelyabinsk agglomeration is carried out. It has revealed the following main characteristics of the core of the agglomeration in Chelyabinsk (structure feature, population, level of centralization of the core as well as the Chelyabinsk agglomeration in general (coefficient of agglomeration

  16. Mobile Eye Tracking Methodology in Informal E-Learning in Social Groups in Technology-Enhanced Science Centres

    Science.gov (United States)

    Magnussen, Rikke; Zachariassen, Maria; Kharlamov, Nikita; Larsen, Birger

    2017-01-01

    This paper presents a methodological discussion of the potential and challenges of involving mobile eye tracking technology in studies of knowledge generation and learning in a science centre context. The methodological exploration is based on eye-tracking studies of audience interaction and knowledge generation in the technology-enhanced health…

  17. A Methodology to Develop Ontologies for Emerging Domains

    Directory of Open Access Journals (Sweden)

    Chai Meenorngwar

    2013-05-01

    Full Text Available The characteristic of complex, dynamic domains, such as an emerging domain, is that the information necessary to describe them is not fully established. Standards are not yet established for these domains, and hence they are difficult to describe and present, and methods are needed that will reflect the changes that will occur as the domains develop and mature. This research proposes the Liverpool Metadata or LiMe methodology to develop an ontology and organise the knowledge that is necessary for developing the domain environment descriptions. Its aim is to capture Knowledge Information (KI from research articles and translate this into semantic information with web description languages such as XML(s, RDF(s, and OWL. LiMe represents an Ontological Framework, which provides the concept characteristics, represented as a concept framework that specifies conceptualisations of the knowledge. LiMe supports the Semantic Web development. “e-Learning” has been chosen as an example of an emerging domain in this research. The characteristics of e-Learning concepts will be extracted from research articles of journal websites such ScienceDirect, Springer, etc and represented as knowledge. LiMe also explicitly represents how these concepts are developed and evolve to represent the domain.

  18. Two Phase Technology Development Initiatives

    Science.gov (United States)

    Didion, Jeffrey R.

    1999-01-01

    Three promising thermal technology development initiatives, vapor compression thermal control system, electronics cooling, and electrohydrodynamics applications are outlined herein. These technologies will provide thermal engineers with additional tools to meet the thermal challenges presented by increased power densities and reduced architectural options that will be available in future spacecraft. Goddard Space Flight Center and the University of Maryland are fabricating and testing a 'proto- flight' vapor compression based thermal control system for the Ultra Long Duration Balloon (ULDB) Program. The vapor compression system will be capable of transporting approximately 400 W of heat while providing a temperature lift of 60C. The system is constructed of 'commercial off-the-shelf' hardware that is modified to meet the unique environmental requirements of the ULDB. A demonstration flight is planned for 1999 or early 2000. Goddard Space Flight Center has embarked upon a multi-discipline effort to address a number of design issues regarding spacecraft electronics. The program addressed the high priority design issues concerning the total mass of standard spacecraft electronics enclosures and the impact of design changes on thermal performance. This presentation reviews the pertinent results of the Lightweight Electronics Enclosure Program. Electronics cooling is a growing challenge to thermal engineers due to increasing power densities and spacecraft architecture. The space-flight qualification program and preliminary results of thermal performance tests of copper-water heat pipes are presented. Electrohydrodynamics (EHD) is an emerging technology that uses the secondary forces that result from the application of an electric field to a flowing fluid to enhance heat transfer and manage fluid flow. A brief review of current EHD capabilities regarding heat transfer enhancement of commercial heat exchangers and capillary pumped loops is presented. Goddard Space Flight

  19. Development of the Methodology for the Economic Evaluation of Managerial Decisions as a Factor of Economic Security Increase

    Directory of Open Access Journals (Sweden)

    Olga Aleksandrovna Romanova

    2016-09-01

    Full Text Available In the article, it is noted that the emergence of the phenomenon of interdependence between security and development — so-called security-development nexus, becomes determining during the development of strategic documents at all hierarchical levels. It gives relevance to the search of the methodological decisions allowing to consider the possible threats to economic security at the strategic level, and the pragmatical actions which are not contradicting a strategic vector of economic entities development — at the tactical level. Instability factors which threat the economic security are revealed. A rationale for the development of the new model of national economy development, whose central element is new industrialization, is substantiated. The most important trends of the development of world economy influencing the strategic vector of the increase of the Russian economic security are considered. It is discovered that in the conditions of new industrialization, the intellectual core of the high-technology sector of the economy is formed by convergent technologies (NBICS technology. A methodological approach to the economic evaluation of management decisions in the conditions of uncertainty is offered. The methodological principles, which have to be accounted in the case of the development of the modern methodology for the economic evaluation of economic decisions, are allocated. Among them, there are the development of the preferred reality or so-called «vision of the future», the priority of network decisions as the basis for new markets development; the mass customization and individualization of requirements, basic changes of the profile of competences which provides the competitiveness in the labour market, use of the ideology of the inclusive development and reformative investment creating general values. The offered methodology is based on an optimum combination of the traditional methods of the economic evaluation of managerial

  20. Methodology for Impact Analysis of the Mobile Web in Developing Countries: a Pilot Study in Nairobi, Kenya

    OpenAIRE

    Purwandari, Betty; Hall, Wendy; Wills, Gary

    2011-01-01

    In this paper, we describe an impact analysis methodology to measure the impact of the Mobile Web in developing nations. This methodology is needed to anticipate the effects of the Mobile Web on society. Moreover, it can guide advancement of Mobile Web technology to better serve its users. In May 2010, a pilot study to test the methodology was carried out in Nairobi, Kenya. There were 47 students from 3 leading universities participated in the study. Questionnaires were used to ask how they u...

  1. Development of DUPIC safeguards technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H. D.; Kang, H. Y.; Ko, W. I. [and others

    2002-05-01

    DUPIC safeguards R and D in the second phase has focused on the development of nuclear material measurement system and its operation and verification, the development of nuclear material control and accounting system, and the development of remote and unmanned containment/surveillance system. Of them, the nuclear material measurement system was authenticated from IAEA and officially used for IAEA and domestic safeguards activities in DFDF. It was also verified that the system could be used for quality control of DUPIC process. It is recognised that the diagnostic software using neural network and remote and unmanned containment/surveillance system developed here could be key technologies to go into remote and near-real time monitoring system. The result of this project will eventually contribute to similar nuclear fuel cycles like MOX and pyroprocessing facility as well as the effective implementation of DUPIC safeguards. In addition, it will be helpful to enhance international confidence build-up in the peaceful use of spent fuel material.

  2. The Methodology Roles in the Realization of a Model Development Environment

    OpenAIRE

    Arthur, James D.; Nance, Richard E.

    1988-01-01

    The definition of "methodology" is followed by a very brief review of past work in modeling methodologies. The dual role of a methodologies is explained: (1) conceptual guidance in the modeling task, and (2) definition of needs for environment designers. A model development based on the conical methodology serves for specific illustration of both roles.

  3. Quantification of Posterior Globe Flattening: Methodology Development and Validationc

    Science.gov (United States)

    Lumpkins, S. B.; Garcia, K. M.; Sargsyan, A. E.; Hamilton, D. R.; Berggren, M. D.; Antonsen, E.; Ebert, D.

    2011-01-01

    Microgravity exposure affects visual acuity in a subset of astronauts, and mechanisms may include structural changes in the posterior globe and orbit. Particularly, posterior globe flattening has been implicated in several astronauts. This phenomenon is known to affect some terrestrial patient populations, and has been shown to be associated with intracranial hypertension. It is commonly assessed by magnetic resonance imaging (MRI), computed tomography (CT), or B-mode ultrasound (US), without consistent objective criteria. NASA uses a semi-quantitative scale of 0-3 as part of eye/orbit MRI and US analysis for occupational monitoring purposes. The goal of this study was to initiate development of an objective quantification methodology for posterior globe flattening.

  4. Quantification of Posterior Globe Flattening: Methodology Development and Validation

    Science.gov (United States)

    Lumpkins, Sarah B.; Garcia, Kathleen M.; Sargsyan, Ashot E.; Hamilton, Douglas R.; Berggren, Michael D.; Ebert, Douglas

    2012-01-01

    Microgravity exposure affects visual acuity in a subset of astronauts and mechanisms may include structural changes in the posterior globe and orbit. Particularly, posterior globe flattening has been implicated in the eyes of several astronauts. This phenomenon is known to affect some terrestrial patient populations and has been shown to be associated with intracranial hypertension. It is commonly assessed by magnetic resonance imaging (MRI), computed tomography (CT) or B-mode Ultrasound (US), without consistent objective criteria. NASA uses a semiquantitative scale of 0-3 as part of eye/orbit MRI and US analysis for occupational monitoring purposes. The goal of this study was ot initiate development of an objective quantification methodology to monitor small changes in posterior globe flattening.

  5. MAPPING OF TRADITIONAL SOFTWARE DEVELOPMENT METHODS TO AGILE METHODOLOGY

    Directory of Open Access Journals (Sweden)

    Rashmi Popli

    2013-02-01

    Full Text Available Agility is bringing in responsibility and ownership in individuals, which will eventually bring out effectiveness and efficiency in deliverables. Companies are drifting from traditional Software Development Life Cycle models to Agile Environment for the purpose of attaining quality and for the sake of saving cost and time. In Traditional models, life cycle is properly defined and also phases are elaborated by specifying needed input and output parameters. On the other hand, in Agile environment, phases are specific to methodologies of Agile - Extreme Programming etc. In this paper a common life cycle approach is proposed that is applicable for different kinds of methods. This paper also aims to describe a mapping function for mapping of traditional methods to Agile methods.

  6. Development and evaluation of clicker methodology for introductory physics courses

    Science.gov (United States)

    Lee, Albert H.

    Many educators understand that lectures are cost effective but not learning efficient, so continue to search for ways to increase active student participation in this traditionally passive learning environment. In-class polling systems, or "clickers", are inexpensive and reliable tools allowing students to actively participate in lectures by answering multiple-choice questions. Students assess their learning in real time by observing instant polling summaries displayed in front of them. This in turn motivates additional discussions which increase the opportunity for active learning. We wanted to develop a comprehensive clicker methodology that creates an active lecture environment for a broad spectrum of students taking introductory physics courses. We wanted our methodology to incorporate many findings of contemporary learning science. It is recognized that learning requires active construction; students need to be actively involved in their own learning process. Learning also depends on preexisting knowledge; students construct new knowledge and understandings based on what they already know and believe. Learning is context dependent; students who have learned to apply a concept in one context may not be able to recognize and apply the same concept in a different context, even when both contexts are considered to be isomorphic by experts. On this basis, we developed question sequences, each involving the same concept but having different contexts. Answer choices are designed to address students preexisting knowledge. These sequences are used with the clickers to promote active discussions and multiple assessments. We have created, validated, and evaluated sequences sufficient in number to populate all of introductory physics courses. Our research has found that using clickers with our question sequences significantly improved student conceptual understanding. Our research has also found how to best measure student conceptual gain using research-based instruments

  7. INTERNET RESOURCES SEARCH METHODOLOGY FOR DEMONSTRATION OF TECHNOLOGICAL PROCESSES IN CHEMISTRY STUDYING

    Directory of Open Access Journals (Sweden)

    Olga M. Naumenko

    2014-01-01

    Full Text Available The question of methodology of organization of search and application of Resources of the Internet is examined for demonstration of technological processes at the study of chemistry in senior school and higher educational establishments of І-ІІ levels of accreditation. Realization of positions of the new State standard of the base and complete secondary education needs creation of the certain methodical going near organization of search and use in the educational process of Resources of the Internet, that can be used in a course of chemistry for demonstration of their practical using, including technological processes. Considerable attention is devoted to advices for teachers in relation to methodology of the use of Resources of the Internet at preparation and realization of practical and laboratory work, other forms of students’ educational-searching activity.

  8. Methodology of Computer Science and Technology%计算机科学与技术方法论

    Institute of Scientific and Technical Information of China (English)

    董荣胜; 古天龙; 蔡国永; 谢春光

    2002-01-01

    In this paper,two documents of “Computing as a discpline”and “Computing Curricula 1991” are briefly introduccd,and their main contributions to the methodology of computer science and technology are porinted out.Then based on the general methodology of science and technology,the definition of computer science and technology is given,and its three paradigms (abstraction,theory,design),fundamental problem,core concept,mathematical methods and system approaches are presented.Finally,we conclude that the methodology of computer science and technology is a new theory in the computing cognition field.

  9. Cost analysis methodology: Photovoltaic Manufacturing Technology Project. Annual subcontract report, 11 March 1991--11 November 1991

    Energy Technology Data Exchange (ETDEWEB)

    Whisnant, R.A. [Research Triangle Inst., Research Triangle Park, NC (United States)

    1992-09-01

    This report describes work done under Phase 1 of the Photovoltaic Manufacturing Technology (PVMaT) Project. PVMaT is a five-year project to support the translation of research and development in PV technology into the marketplace. PVMaT, conceived as a DOE/industry partnership, seeks to advanced PV manufacturing technologies, reduce PV module production costs, increase module performance, and expand US commercial production capacities. Under PVMaT, manufacturers will propose specific manufacturing process improvements that may contribute to the goals of the project, which is to lessen the cost, thus hastening entry into the larger scale, grid-connected applications. Phase 1 of the PVMaT project is to identify obstacles and problems associated with manufacturing processes. This report describes the cost analysis methodology required under Phase 1 that will allow subcontractors to be ranked and evaluated during Phase 2.

  10. Development and Applications of Simulation Technology

    Institute of Scientific and Technical Information of China (English)

    WangZicai

    2004-01-01

    The developing process of simulation technology is discussed in view of its development, maturation and further development.The applications of simulation technology in the fields of national economy are introduced. Finally, the level and status quo of simulation technology home and overseas are analyzed, and its future trend in the new century is presented.

  11. Safety-related operator actions: methodology for developing criteria

    Energy Technology Data Exchange (ETDEWEB)

    Kozinsky, E.J.; Gray, L.H.; Beare, A.N.; Barks, D.B.; Gomer, F.E.

    1984-03-01

    This report presents a methodology for developing criteria for design evaluation of safety-related actions by nuclear power plant reactor operators, and identifies a supporting data base. It is the eleventh and final NUREG/CR Report on the Safety-Related Operator Actions Program, conducted by Oak Ridge National Laboratory for the US Nuclear Regulatory Commission. The operator performance data were developed from training simulator experiments involving operator responses to simulated scenarios of plant disturbances; from field data on events with similar scenarios; and from task analytic data. A conceptual model to integrate the data was developed and a computer simulation of the model was run, using the SAINT modeling language. Proposed is a quantitative predictive model of operator performance, the Operator Personnel Performance Simulation (OPPS) Model, driven by task requirements, information presentation, and system dynamics. The model output, a probability distribution of predicted time to correctly complete safety-related operator actions, provides data for objective evaluation of quantitative design criteria.

  12. Developing a Design Methodology for Web 2.0 Mediated Learning

    DEFF Research Database (Denmark)

    2010-01-01

    Ed). We describe how this method has been adopted as part of a learning methodology building on concepts and models presented in the other symposium papers, in particular those of active, problem based learning and web 2.0-technologies. The challenge of designing on the basis of an explicit learning......In this paper we discuss the notion of a learning methodology and situate this within the wider frame of learning design or “Designing for Learning”. We discuss existing work within this broad area by trying to categorize different approaches and interpretations and we present our development...... of particular ‘mediating design artefacts’. We discuss what can be viewed as a lack of attention paid to integrating the preferred teaching styles and learning philosophies of practitioners into design tools, and present a particular method for learning design; the COllaborative E-learning Design method (Co...

  13. Developing a Design Methodology for Web 2.0 Mediated Learning

    DEFF Research Database (Denmark)

    2010-01-01

    In this paper we discuss the notion of a learning methodology and situate this within the wider frame of learning design or “Designing for Learning”. We discuss existing work within this broad area by trying to categorize different approaches and interpretations and we present our development...... of particular ‘mediating design artefacts’. We discuss what can be viewed as a lack of attention paid to integrating the preferred teaching styles and learning philosophies of practitioners into design tools, and present a particular method for learning design; the COllaborative E-learning Design method (Co......Ed). We describe how this method has been adopted as part of a learning methodology building on concepts and models presented in the other symposium papers, in particular those of active, problem based learning and web 2.0-technologies. The challenge of designing on the basis of an explicit learning...

  14. Is China Developing an Independent Technology Capability?

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Are Chinese technology enterprises only the "hired laborers" of other countries? Does China possess high technology in a real sense? When will the country develop independent scientific and technological innovation? Those are not brand new questions. However, after the Chinese Government issued its National Guidelines on the Long- and Medium-Term Program for Science and Technology

  15. Arctic Energy Technology Development Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Sukumar Bandopadhyay; Charles Chamberlin; Robert Chaney; Gang Chen; Godwin Chukwu; James Clough; Steve Colt; Anthony Covescek; Robert Crosby; Abhijit Dandekar; Paul Decker; Brandon Galloway; Rajive Ganguli; Catherine Hanks; Rich Haut; Kristie Hilton; Larry Hinzman; Gwen Holdman; Kristie Holland; Robert Hunter; Ron Johnson; Thomas Johnson; Doug Kame; Mikhail Kaneveskly; Tristan Kenny; Santanu Khataniar; Abhijeet Kulkami; Peter Lehman; Mary Beth Leigh; Jenn-Tai Liang; Michael Lilly; Chuen-Sen Lin; Paul Martin; Pete McGrail; Dan Miller; Debasmita Misra; Nagendra Nagabhushana; David Ogbe; Amanda Osborne; Antoinette Owen; Sharish Patil; Rocky Reifenstuhl; Doug Reynolds; Eric Robertson; Todd Schaef; Jack Schmid; Yuri Shur; Arion Tussing; Jack Walker; Katey Walter; Shannon Watson; Daniel White; Gregory White; Mark White; Richard Wies; Tom Williams; Dennis Witmer; Craig Wollard; Tao Zhu

    2008-12-31

    The Arctic Energy Technology Development Laboratory was created by the University of Alaska Fairbanks in response to a congressionally mandated funding opportunity through the U.S. Department of Energy (DOE), specifically to encourage research partnerships between the university, the Alaskan energy industry, and the DOE. The enabling legislation permitted research in a broad variety of topics particularly of interest to Alaska, including providing more efficient and economical electrical power generation in rural villages, as well as research in coal, oil, and gas. The contract was managed as a cooperative research agreement, with active project monitoring and management from the DOE. In the eight years of this partnership, approximately 30 projects were funded and completed. These projects, which were selected using an industry panel of Alaskan energy industry engineers and managers, cover a wide range of topics, such as diesel engine efficiency, fuel cells, coal combustion, methane gas hydrates, heavy oil recovery, and water issues associated with ice road construction in the oil fields of the North Slope. Each project was managed as a separate DOE contract, and the final technical report for each completed project is included with this final report. The intent of this process was to address the energy research needs of Alaska and to develop research capability at the university. As such, the intent from the beginning of this process was to encourage development of partnerships and skills that would permit a transition to direct competitive funding opportunities managed from funding sources. This project has succeeded at both the individual project level and at the institutional development level, as many of the researchers at the university are currently submitting proposals to funding agencies, with some success.

  16. Principles for fostering the transdisciplinary development of assistive technologies.

    Science.gov (United States)

    Boger, Jennifer; Jackson, Piper; Mulvenna, Maurice; Sixsmith, Judith; Sixsmith, Andrew; Mihailidis, Alex; Kontos, Pia; Miller Polgar, Janice; Grigorovich, Alisa; Martin, Suzanne

    2016-04-07

    Developing useful and usable assistive technologies often presents complex (or "wicked") challenges that require input from multiple disciplines and sectors. Transdisciplinary collaboration can enable holistic understanding of challenges that may lead to innovative, impactful and transformative solutions. This paper presents generalised principles that are intended to foster transdisciplinary assistive technology development. The paper introduces the area of assistive technology design before discussing general aspects of transdisciplinary collaboration followed by an overview of relevant concepts, including approaches, methodologies and frameworks for conducting and evaluating transdisciplinary working and assistive technology design. The principles for transdisciplinary development of assistive technologies are presented and applied post hoc to the COACH project, an ambient-assisted living technology for guiding completion of activities of daily living by older adults with dementia as an illustrative example. Future work includes the refinement and validation of these principles through their application to real-world transdisciplinary assistive technology projects. Implications for rehabilitation Transdisciplinarity encourages a focus on real world 'wicked' problems. A transdisciplinary approach involves transcending disciplinary boundaries and collaborating with interprofessional and community partners (including the technology's intended users) on a shared problem. Transdisciplinarity fosters new ways of thinking about and doing research, development, and implementation, expanding the scope, applicability, and commercial viability of assistive technologies.

  17. Vehicle technologies heavy vehicle program : FY 2008 benefits analysis, methodology and results --- final report.

    Energy Technology Data Exchange (ETDEWEB)

    Singh, M.; Energy Systems; TA Engineering

    2008-02-29

    This report describes the approach to estimating the benefits and analysis results for the Heavy Vehicle Technologies activities of the Vehicle Technologies (VT) Program of EERE. The scope of the effort includes: (1) Characterizing baseline and advanced technology vehicles for Class 3-6 and Class 7 and 8 trucks, (2) Identifying technology goals associated with the DOE EERE programs, (3) Estimating the market potential of technologies that improve fuel efficiency and/or use alternative fuels, and (4) Determining the petroleum and greenhouse gas emissions reductions associated with the advanced technologies. In FY 08 the Heavy Vehicles program continued its involvement with various sources of energy loss as compared to focusing more narrowly on engine efficiency and alternative fuels. These changes are the result of a planning effort that first occurred during FY 04 and was updated in the past year. (Ref. 1) This narrative describes characteristics of the heavy truck market as they relate to the analysis, a description of the analysis methodology (including a discussion of the models used to estimate market potential and benefits), and a presentation of the benefits estimated as a result of the adoption of the advanced technologies. The market penetrations are used as part of the EERE-wide integrated analysis to provide final benefit estimates reported in the FY08 Budget Request. The energy savings models are utilized by the VT program for internal project management purposes.

  18. Development of economic consequence methodology for process risk analysis.

    Science.gov (United States)

    Zadakbar, Omid; Khan, Faisal; Imtiaz, Syed

    2015-04-01

    A comprehensive methodology for economic consequence analysis with appropriate models for risk analysis of process systems is proposed. This methodology uses loss functions to relate process deviations in a given scenario to economic losses. It consists of four steps: definition of a scenario, identification of losses, quantification of losses, and integration of losses. In this methodology, the process deviations that contribute to a given accident scenario are identified and mapped to assess potential consequences. Losses are assessed with an appropriate loss function (revised Taguchi, modified inverted normal) for each type of loss. The total loss is quantified by integrating different loss functions. The proposed methodology has been examined on two industrial case studies. Implementation of this new economic consequence methodology in quantitative risk assessment will provide better understanding and quantification of risk. This will improve design, decision making, and risk management strategies.

  19. A methodology to enable rapid evaluation of aviation environmental impacts and aircraft technologies

    Science.gov (United States)

    Becker, Keith Frederick

    -processing, which does not capture physical interdependencies that may arise at the aircraft-level. The goal of the work that has been conducted here was the development of a methodology to develop surrogate fleet approaches that leverage the capability of physics-based aircraft models and the development of connectivity to fleet-level analysis tools to enable rapid evaluation of fuel burn and emissions metrics. Instead of requiring development of an individual physics-based model for each vehicle in the fleet, the surrogate fleet approaches seek to reduce the number of such models needed while still accurately capturing performance of the fleet. By reducing the number of models, both development time and execution time to generate fleet-level results may also be reduced. The initial steps leading to surrogate fleet formulation were a characterization of the commercial fleet into groups based on capability followed by the selection of a reference vehicle model and a reference set of operations for each group. Next, three potential surrogate fleet approaches were formulated. These approaches include the parametric correction factor approach, in which the results of a reference vehicle model are corrected to match the aggregate results of each group; the average replacement approach, in which a new vehicle model is developed to generate aggregate results of each group, and the best-in-class replacement approach, in which results for a reference vehicle are simply substituted for the entire group. Once candidate surrogate fleet approaches were developed, they were each applied to and evaluated over the set of reference operations. Then each approach was evaluated for their ability to model variations in operations. Finally, the ability of each surrogate fleet approach to capture implementation of different technology suites along with corresponding interdependencies between fuel burn and emissions was evaluated using the concept of a virtual fleet to simulate the technology response

  20. Applying of component system development in object methodology

    Directory of Open Access Journals (Sweden)

    Milan Mišovič

    2013-01-01

    software system and referred to as software alliance.In both of these mentioned publications there is delivered ​​deep philosophy of relevant issues relating to SWC / SWA as creating copies of components (cloning, the establishment and destruction of components at software run-time (dynamic reconfiguration, cooperation of autonomous components, programmable management of components interface in depending on internal components functionality and customer requirements (functionality, security, versioning.Nevertheless, even today we can meet numerous cases of SWC / SWA existence, with a highly developed architecture that is accepting vast majority of these requests. On the other hand, in the development practice of component-based systems with a dynamic architecture (i.e. architecture with dynamic reconfiguration, and finally with a mobile architecture (i.e. architecture with dynamic component mobility confirms the inadequacy of the design methods contained in UML 2.0. It proves especially the dissertation thesis (Rych, Weis, 2008. Software Engineering currently has two different approaches to systems SWC / SWA. The first approach is known as component-oriented software development CBD (Component based Development. According to (Szyper, 2002 that is a collection of CBD methodologies that are heavily focused on the setting up and software components re-usability within the architecture. Although CBD does not show high theoretical approach, nevertheless, it is classified under the general evolution of SDP (Software Development Process, see (Sommer, 2010 as one of its two dominant directions.From a structural point of view, a software system consists of self-contained, interoperable architectural units – components based on well-defined interfaces. Classical procedural object-oriented methodologies significantly do not use the component meta-models, based on which the target component systems are formed, then. Component meta-models describe the syntax, semantics of

  1. Scene projection technology development for imaging sensor testing at AEDC

    Science.gov (United States)

    Lowry, H.; Fedde, M.; Crider, D.; Horne, H.; Bynum, K.; Steely, S.; Labello, J.

    2012-06-01

    Arnold Engineering Development Center (AEDC) is tasked with visible-to-LWIR imaging sensor calibration and characterization, as well as hardware-in-the-loop (HWIL) testing with high-fidelity complex scene projection to validate sensor mission performance. They are thus involved in the development of technologies and methodologies that are used in space simulation chambers for such testing. These activities support a variety of program needs such as space situational awareness (SSA). This paper provides an overview of pertinent technologies being investigated and implemented at AEDC.

  2. Technology-Enhanced Problem-Based Learning Methodology in Geographically Dispersed Learners of Tshwane University of Technology

    Directory of Open Access Journals (Sweden)

    Sibitse M. Tlhapane

    2010-03-01

    Full Text Available Improving teaching and learning methodologies is not just a wish but rather strife for most educational institutions globally. To attain this, the Adelaide Tambo School of Nursing Science implemented a Technology-enhanced Problem-Based Learning methodology in the programme B Tech Occupational Nursing, in 2006. This is a two-year post-basic nursing program. The students are geographically dispersed and the curriculum design is the typically student-centred outcomes-based education. The research question posed by this paper is: How does technology-enhanced problem-based learning enhance student-centred learning, thinking skills, social skills and social space for learners? To answer the above question, a case study with both qualitative and quantitative data was utilised. The participants consisted of all students registered for the subject Occupational Health level 4. The sample group was chosen from willing participants from the Pretoria, eMalahleni and Polokwane learning sites, using the snowball method. This method was seen as appropriate due to the timing of the study. Data was collected using a questionnaire with both open and closed-ended questions. An analyses of the students‟ end of year examination was also done, including a comparison of performances by students on technology enhanced problem-based learning and those on problem-based learning only. The findings revealed that with Technology-enhanced Problem Based Learning (PBL, students‟ critical thinking, problem solving, and social skills improved and that social space was enhanced. This was supported by improved grades in students‟ on Technology-enhanced PBL as compared to those on PBL only.

  3. The development of theoretical and methodological foundations of enterprises’ transition to innovative development

    Directory of Open Access Journals (Sweden)

    Yu.S. Shypulina

    2011-12-01

    Full Text Available The analysis is set out of trends in the development of theoretical and methodological approaches to the management process of intensification of domestic enterprises transition to innovative development. The results can be the basis for the formation of the prerequisites for creating the innovation-friendly environment for domestic enterprises.

  4. Development of superconductor application technology

    Energy Technology Data Exchange (ETDEWEB)

    Hong, G. W.; Kim, C. J.; Lee, H. G.; Lee, H. J.; Kim, K. B.; Won, D. Y.; Jang, K. I.; Kwon, S. C.; Kim, W. J.; Ji, Y. A.; Yang, S. W.; Kim, W. K.; Park, S. D.; Lee, M. H.; Lee, D. M.; Park, H. W.; Yu, J. K.; Lee, I. S.; Kim, J. J.; Choi, H. S.; Chu, Y.; Kim, Y. S.; Kim, D. H.

    1997-09-01

    Fabrication of high Tc bulk superconductor and its application, fabrication of superconducting wire for electric power device and analysis for cryogenic system were carried out for developing superconductor application technologies for electric power system. High quality YBaCuO bulk superconductor was fabricated by controlling initial powder preparation process and prototype flywheel energy storage device was designed basically. The superconducting levitation force measuring device was made to examine the property of prepared superconductor specimen. Systematic studies onthe method of starting powder preparation, mechanical fabrication process, heat treatment condition and analysis of plastic deformation were carried out to increase the stability and reproducibility of superconducting wire. A starting power with good reactivity and fine particle size was obtained by mechanical grinding, control of phase assemblage, and emulsion drying method. Ag/BSCCO tape with good cross sectional shape and Jc of 20,000 A/cm{sup 2} was fabricated by applying CIP packing procedure. Multifilamentary wire with Jc of 10,000 A/cm{sup 2} was fabricated by rolling method using square billet as starting shape. The joining of the multifilamentary wire was done by etching and pressing process and showed 50% of joining efficiency. Analysis on the heat loss in cryostat for high Tc superconducting device was carried out for optimum design of the future cryogenic system. (author). 66 refs., 104 figs.

  5. Managing Innovation and Technology in Developing Countries

    CERN Document Server

    Ali, Murad; Khan, Pervez

    2009-01-01

    Innovation and technology management is an inevitable issue in the high end technological and innovative organizations. Today, most of the innovations are limited with developed countries like USA, Japan and Europe while developing countries are still behind in the field of innovation and management of technology. But it is also becoming a subject for rapid progress and development in developing countries. Innovation and technology environment in developing countries are by nature, problematic, characterized by poor business models, political instability and governance conditions, low education level and lack of world-class research universities, an underdeveloped and mediocre physical infrastructure, and lack of solid technology based on trained human resources. This paper provides a theoretical and conceptual framework analysis for managing innovation and technology in developing countries like India and China. We present the issues and challenges in innovation and technology management and come up with pro...

  6. Policy issues inherent in advanced technology development

    Energy Technology Data Exchange (ETDEWEB)

    Baumann, P.D.

    1994-12-31

    In the development of advanced technologies, there are several forces which are involved in the success of the development of those technologies. In the overall development of new technologies, a sufficient number of these forces must be present and working in order to have a successful opportunity at developing, introducing and integrating into the marketplace a new technology. This paper discusses some of these forces and how they enter into the equation for success in advanced technology research, development, demonstration, commercialization and deployment. This paper limits itself to programs which are generally governmental funded, which in essence represent most of the technology development efforts that provide defense, energy and environmental technological products. Along with the identification of these forces are some suggestions as to how changes may be brought about to better ensure success in a long term to attempt to minimize time and financial losses.

  7. Research and Development Methodology for Practical Use of Accident Tolerant Fuel in Light Water Reactors

    Directory of Open Access Journals (Sweden)

    Masaki Kurata

    2016-02-01

    Full Text Available Research and development (R&D methodology for the practical use of accident tolerant fuel (ATF in commercial light water reactors is discussed in the present review. The identification and quantification of the R&D-metrics and the attribute of candidate ATF-concepts, recognition of the gap between the present R&D status and the targeted practical use, prioritization of the R&D, and technology screening schemes are important for achieving a common understanding on technology screening process among stakeholders in the near term and in developing an efficient R&D track toward practical use. Technology readiness levels and attribute guides are considered to be proper indices for these evaluations. In the midterm, the selected ATF-concepts will be developed toward the technology readiness level-5, at which stage the performance of the prototype fuel rods and the practicality of industrial scale fuel manufacturing will be verified and validated. Regarding the screened-out concepts, which are recognized to have attractive potentials, the fundamental R&D should be continued in the midterm to find ways of addressing showstoppers.

  8. DEVELOPMENT OF TECHNOLOGY FOR ANODE BALL PRODUCTION

    Directory of Open Access Journals (Sweden)

    G. V. Kozhevnikova

    2015-01-01

    Full Text Available Technology of copper anode balls manufacturing by means of cross-wedge rolling method is developed. The technology satisfies the requirements towards anode balls’ crystalline structure, form and geometrical dimensions accuracy.

  9. Energy Storage (II): Developing Advanced Technologies

    Science.gov (United States)

    Robinson, Arthur L

    1974-01-01

    Energy storage, considered by some scientists to be the best technological and economic advancement after advanced nuclear power, still rates only modest funding for research concerning the development of advanced technologies. (PEB)

  10. Colombian capital goods industry and technological development.

    OpenAIRE

    Zuleta LA; Londono JL; Uribe JD

    1982-01-01

    ILO pub-WEP pub. Working paper, capital goods, technology, industrial development, trends, 1955-1978, Colombia - supply and demand, choice of product, Innovation, technology transfer, obstacles, tariff policy, research policy. Bibliography, diagram, statistical tables.

  11. Success factors in technology development

    Science.gov (United States)

    Preston, John T.

    1995-01-01

    Universities in the U.S. have a significant impact on business through the transfer of technology. This paper describes goals and philosophy of the Technology Licensing Office at the Massachusetts Institute of Technology. This paper also relates the critical factors for susscessful technology transfer, particularly relating to new business formation. These critical factors include the quality of the technology, the quality of the management, the quality of the investor, the passion for success, and the image of the company. Descriptions of three different levels of investment are also given and the most successful level of investment for starting a new company is reviewed. Licensing to large companies is also briefly reviewed, as this type of licensing requires some different strategies than that of licensing to start-up companies. High quality critical factors and intelligent investment create rewards for the parties and successful ventures.

  12. Development of a General Modelling Methodology for Vacuum Residue Hydroconversion

    Directory of Open Access Journals (Sweden)

    Pereira de Oliveira L.

    2013-11-01

    Full Text Available This work concerns the development of a methodology for kinetic modelling of refining processes, and more specifically for vacuum residue conversion. The proposed approach allows to overcome the lack of molecular detail of the petroleum fractions and to simulate the transformation of the feedstock molecules into effluent molecules by means of a two-step procedure. In the first step, a synthetic mixture of molecules representing the feedstock for the process is generated via a molecular reconstruction method, termed SR-REM molecular reconstruction. In the second step, a kinetic Monte-Carlo method (kMC is used to simulate the conversion reactions on this mixture of molecules. The molecular reconstruction was applied to several petroleum residues and is illustrated for an Athabasca (Canada vacuum residue. The kinetic Monte-Carlo method is then described in detail. In order to validate this stochastic approach, a lumped deterministic model for vacuum residue conversion was simulated using Gillespie’s Stochastic Simulation Algorithm. Despite the fact that both approaches are based on very different hypotheses, the stochastic simulation algorithm simulates the conversion reactions with the same accuracy as the deterministic approach. The full-scale stochastic simulation approach using molecular-level reaction pathways provides high amounts of detail on the effluent composition and is briefly illustrated for Athabasca VR hydrocracking.

  13. THE AGILE METHODOLOGY

    Directory of Open Access Journals (Sweden)

    Charul Deewan

    2012-09-01

    Full Text Available The technologies are numerous and Software is the one whichis most widely used. Some companies have their owncustomized methodology for developing their software but themajority speaks about two kinds of methodologies: Traditionaland Agile methodologies. In this paper, we will discuss someof the aspects of what Agile methodology is, how it can beused to get the best result from a project, how do we get it towork in an organization.

  14. Structured system engineering methodologies used to develop a nuclear thermal propulsion engine

    Science.gov (United States)

    Corban, R.; Wagner, R.

    1993-01-01

    To facilitate the development of a space nuclear thermal propulsion engine for manned flights to Mars, requirements must be established early in the technology development cycle. The long lead times for the acquisition of the engine system and nuclear test facilities demands that the engine system size, performance and safety goals be defined at the earliest possible time. These systems are highly complex and require a large multidisciplinary systems engineering team to develop and track requirements, and to ensure that the as-built system reflects the intent of the mission. A methodology has been devised which uses sophisticated computer tools to effectively develop and interpret functional requirements, and furnish these to the specification level for implementation.

  15. Methodology for optimizing the development and operation of gas storage fields

    Energy Technology Data Exchange (ETDEWEB)

    Mercer, J.C.; Ammer, J.R.; Mroz, T.H.

    1995-04-01

    The Morgantown Energy Technology Center is pursuing the development of a methodology that uses geologic modeling and reservoir simulation for optimizing the development and operation of gas storage fields. Several Cooperative Research and Development Agreements (CRADAs) will serve as the vehicle to implement this product. CRADAs have been signed with National Fuel Gas and Equitrans, Inc. A geologic model is currently being developed for the Equitrans CRADA. Results from the CRADA with National Fuel Gas are discussed here. The first phase of the CRADA, based on original well data, was completed last year and reported at the 1993 Natural Gas RD&D Contractors Review Meeting. Phase 2 analysis was completed based on additional core and geophysical well log data obtained during a deepening/relogging program conducted by the storage operator. Good matches, within 10 percent, of wellhead pressure were obtained using a numerical simulator to history match 2 1/2 injection withdrawal cycles.

  16. Mobile Sensor Technologies Being Developed

    Science.gov (United States)

    Greer, Lawrence C.; Oberle, Lawrence G.

    2003-01-01

    The NASA Glenn Research Center is developing small mobile platforms for sensor placement, as well as methods for communicating between roving platforms and a central command location. The first part of this project is to use commercially available equipment to miniaturize an existing sensor platform. We developed a five-circuit-board suite, with an average board size of 1.5 by 3 cm. Shown in the preceding photograph, this suite provides all motor control, direction finding, and communications capabilities for a 27- by 21- by 40-mm prototype mobile platform. The second part of the project is to provide communications between mobile platforms, and also between multiple platforms and a central command location. This is accomplished with a low-power network labeled "SPAN," Sensor Platform Area Network, a local area network made up of proximity elements. In practice, these proximity elements are composed of fixed- and mobile-sensor-laden science packages that communicate to each other via radiofrequency links. Data in the network will be shared by a central command location that will pass information into and out of the network through its access to a backbone element. The result will be a protocol portable to general purpose microcontrollers satisfying a host of sensor networking tasks. This network will enter the gap somewhere between television remotes and Bluetooth but, unlike 802.15.4, will not specify a physical layer, thus allowing for many data rates over optical, acoustical, radiofrequency, hardwire, or other media. Since the protocol will exist as portable C-code, developers may be able to embed it in a host of microcontrollers from commercial to space grade and, of course, to design it into ASICs. Unlike in 802.15.4, the nodes will relate to each other as peers. A demonstration of this protocol using the two test bed platforms was recently held. Two NASA modified, commercially available, mobile platforms communicated and shared data with each other and a

  17. Definition of 1992 Technology Aircraft Noise Levels and the Methodology for Assessing Airplane Noise Impact of Component Noise Reduction Concepts

    Science.gov (United States)

    Kumasaka, Henry A.; Martinez, Michael M.; Weir, Donald S.

    1996-01-01

    This report describes the methodology for assessing the impact of component noise reduction on total airplane system noise. The methodology is intended to be applied to the results of individual study elements of the NASA-Advanced Subsonic Technology (AST) Noise Reduction Program, which will address the development of noise reduction concepts for specific components. Program progress will be assessed in terms of noise reduction achieved, relative to baseline levels representative of 1992 technology airplane/engine design and performance. In this report, the 1992 technology reference levels are defined for assessment models based on four airplane sizes - an average business jet and three commercial transports: a small twin, a medium sized twin, and a large quad. Study results indicate that component changes defined as program final goals for nacelle treatment and engine/airframe source noise reduction would achieve from 6-7 EPNdB reduction of total airplane noise at FAR 36 Stage 3 noise certification conditions for all of the airplane noise assessment models.

  18. Development of an aeroelastic methodology for surface morphing rotors

    Science.gov (United States)

    Cook, James R.

    Helicopter performance capabilities are limited by maximum lift characteristics and vibratory loading. In high speed forward flight, dynamic stall and transonic flow greatly increase the amplitude of vibratory loads. Experiments and computational simulations alike have indicated that a variety of active rotor control devices are capable of reducing vibratory loads. For example, periodic blade twist and flap excitation have been optimized to reduce vibratory loads in various rotors. Airfoil geometry can also be modified in order to increase lift coefficient, delay stall, or weaken transonic effects. To explore the potential benefits of active controls, computational methods are being developed for aeroelastic rotor evaluation, including coupling between computational fluid dynamics (CFD) and computational structural dynamics (CSD) solvers. In many contemporary CFD/CSD coupling methods it is assumed that the airfoil is rigid to reduce the interface by single dimension. Some methods retain the conventional one-dimensional beam model while prescribing an airfoil shape to simulate active chord deformation. However, to simulate the actual response of a compliant airfoil it is necessary to include deformations that originate not only from control devices (such as piezoelectric actuators), but also inertial forces, elastic stresses, and aerodynamic pressures. An accurate representation of the physics requires an interaction with a more complete representation of loads and geometry. A CFD/CSD coupling methodology capable of communicating three-dimensional structural deformations and a distribution of aerodynamic forces over the wetted blade surface has not yet been developed. In this research an interface is created within the Fully Unstructured Navier-Stokes (FUN3D) solver that communicates aerodynamic forces on the blade surface to University of Michigan's Nonlinear Active Beam Solver (UM/NLABS -- referred to as NLABS in this thesis). Interface routines are developed for

  19. Assessing quality in software development: An agile methodology approach

    National Research Council Canada - National Science Library

    V Rodríguez-Hernández; M C Espino-Gudiño; J L González-Pérez; J Gudiño-Bazaldúa; V M Castaño

    2015-01-01

      A novel methodology, result of 10 years of in-field testing, which makes possible the convergence of different types of models and quality standards for Engineering and Computer Science Faculties, is presented...

  20. A methodology for developing anisotropic AAA phantoms via additive manufacturing.

    Science.gov (United States)

    Ruiz de Galarreta, Sergio; Antón, Raúl; Cazón, Aitor; Finol, Ender A

    2017-05-24

    An Abdominal Aortic Aneurysm (AAA) is a permanent focal dilatation of the abdominal aorta at least 1.5 times its normal diameter. The criterion of maximum diameter is still used in clinical practice, although numerical studies have demonstrated the importance of biomechanical factors for rupture risk assessment. AAA phantoms could be used for experimental validation of the numerical studies and for pre-intervention testing of endovascular grafts. We have applied multi-material 3D printing technology to manufacture idealized AAA phantoms with anisotropic mechanical behavior. Different composites were fabricated and the phantom specimens were characterized by biaxial tensile tests while using a constitutive model to fit the experimental data. One composite was chosen to manufacture the phantom based on having the same mechanical properties as those reported in the literature for human AAA tissue; the strain energy and anisotropic index were compared to make this choice. The materials for the matrix and fibers of the selected composite are, respectively, the digital materials FLX9940 and FLX9960 developed by Stratasys. The fiber proportion for the composite is equal to 0.15. The differences between the composite behavior and the AAA tissue are small, with a small difference in the strain energy (0.4%) and a maximum difference of 12.4% in the peak Green strain ratio. This work represents a step forward in the application of 3D printing technology for the manufacturing of AAA phantoms with anisotropic mechanical behavior. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Recent Developments in Detector Technology

    CERN Document Server

    Brau, James E

    2010-01-01

    This review provides an overview of many recent advances in detector technologies for particle physics experiments. Challenges for new technologies include increasing spatial and temporal sensitivity, speed, and radiation hardness while minimizing power and cost. Applications are directed at several future collider experiments, including the Large Hadron Collider luminosity upgrade (sLHC), the linear collider, and the super high luminosity B factory, as well as neutrino and other fixed target experiments, and direct dark matter searches. Furthermore, particle physics has moved into space, with significant contributions of detector technology, and new challenges for future efforts.

  2. Laboratory 3.0: Manufacturing technologies laboratory virtualization with a student-centred methodology

    Directory of Open Access Journals (Sweden)

    Albert Fabregat-Sanjuan

    2017-06-01

    Full Text Available This paper presents a blended-learning strategy for improving the teaching method applied in the laboratory subject Manufacturing Technologies. The teaching method has been changed from a predominantly teacher-centred to an active learning system with a student-centred focus and e-learning activities. In face-to-face classes, a game-based learning platform has been used. This methodology ensured engaging classes at the same time that provided a useful live feedback for students and teachers. The virtualization of the laboratory was achieved by two different e-learning activities, self-assessment tasks and video clips. These e-learning tools have been used not only to improve the students’ learning but also to enhance their motivation. The results from academic outputs show a significant improvement after the new blended learning method is applied. Moreover, a student satisfaction survey shows the positive impact of the methodology on the students’ engagement and motivation.

  3. 2014 International Conference on Simulation and Modeling Methodologies, Technologies and Applications

    CERN Document Server

    Ören, Tuncer; Kacprzyk, Janusz; Filipe, Joaquim

    2015-01-01

    The present book includes a set of selected extended papers from the 4th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2014), held in Vienna, Austria, from 28 to 30 August 2014. The conference brought together researchers, engineers and practitioners interested in methodologies and applications of modeling and simulation. New and innovative solutions are reported in this book. SIMULTECH 2014 received 167 submissions, from 45 countries, in all continents. After a double blind paper review performed by the Program Committee, 23% were accepted as full papers and thus selected for oral presentation. Additional papers were accepted as short papers and posters. A further selection was made after the Conference, based also on the assessment of presentation quality and audience interest, so that this book includes the extended and revised versions of the very best papers of SIMULTECH 2014. Commitment to high quality standards is a major concern of SIMULTEC...

  4. 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications

    CERN Document Server

    Kacprzyk, Janusz; Ören, Tuncer; Filipe, Joaquim

    2016-01-01

    The present book includes a set of selected extended papers from the 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2015), held in Colmar, France, from 21 to 23 July 2015. The conference brought together researchers, engineers and practitioners interested in methodologies and applications of modeling and simulation. New and innovative solutions are reported in this book. SIMULTECH 2015 received 102 submissions, from 36 countries, in all continents. After a double blind paper review performed by the Program Committee, 19% were accepted as full papers and thus selected for oral presentation. Additional papers were accepted as short papers and posters. A further selection was made after the Conference, based also on the assessment of presentation quality and audience interest, so that this book includes the extended and revised versions of the very best papers of SIMULTECH 2015. Commitment to high quality standards is a major concern of SIMULTECH t...

  5. Avoiding and identifying errors in health technology assessment models: qualitative study and methodological review.

    Science.gov (United States)

    Chilcott, J; Tappenden, P; Rawdin, A; Johnson, M; Kaltenthaler, E; Paisley, S; Papaioannou, D; Shippam, A

    2010-05-01

    Health policy decisions must be relevant, evidence-based and transparent. Decision-analytic modelling supports this process but its role is reliant on its credibility. Errors in mathematical decision models or simulation exercises are unavoidable but little attention has been paid to processes in model development. Numerous error avoidance/identification strategies could be adopted but it is difficult to evaluate the merits of strategies for improving the credibility of models without first developing an understanding of error types and causes. The study aims to describe the current comprehension of errors in the HTA modelling community and generate a taxonomy of model errors. Four primary objectives are to: (1) describe the current understanding of errors in HTA modelling; (2) understand current processes applied by the technology assessment community for avoiding errors in development, debugging and critically appraising models for errors; (3) use HTA modellers' perceptions of model errors with the wider non-HTA literature to develop a taxonomy of model errors; and (4) explore potential methods and procedures to reduce the occurrence of errors in models. It also describes the model development process as perceived by practitioners working within the HTA community. A methodological review was undertaken using an iterative search methodology. Exploratory searches informed the scope of interviews; later searches focused on issues arising from the interviews. Searches were undertaken in February 2008 and January 2009. In-depth qualitative interviews were performed with 12 HTA modellers from academic and commercial modelling sectors. All qualitative data were analysed using the Framework approach. Descriptive and explanatory accounts were used to interrogate the data within and across themes and subthemes: organisation, roles and communication; the model development process; definition of error; types of model error; strategies for avoiding errors; strategies for

  6. Development of inherent core technologies for advanced reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Keung Koo; Noh, J.M.; Hwang, D.H. [and others

    1999-03-01

    Recently, the developed countries made their effort on developing the advanced reactor which will result in significantly enhanced safety and economy. However, they will protect the advanced reactor and its design technology with patent and proprietary right. Therefore, it is very important to develop our own key core concepts and inherent core design technologies which can form a foundation of indigenous technologies for development of the domestic advanced reactor in order to keep the superiority in the nuclear plant building market among the developing countries. In order to provide the basic technology for the core design of advanced reactor, this project is for developing the inherent core design concepts with enhanced safety and economy, and associated methodologies and technologies for core analyses. The feasibility study of constructing domestic critical facilities are performed by surveying the status and utilization of foreign facilities and by investigating the demand for domestic facilities. The research results developed in this project, such as core analysis methodologies for hexagonal core, conceptual core design based on hexagonal fuel assemblies and soluble boron core design and control strategies, will provide a technical foundation in developing core design of domestic advanced reactor. Furthermore, they will strengthen the competitiveness of Korean nuclear technology. We also expect that some of the design concepts developed in this project to improve the reactor safety and economy can be applicable to the design of advanced reactor. This will significantly reduce the public anxiety on the nuclear power plant, and will contribute to the economy of construction and operation for the future domestic reactors. Even though the critical facility will not be constructed right now, the investigation of the status and utilization of foreign critical facility will contribute to the future critical facility construction. (author). 150 refs., 34 tabs., 103

  7. Computer Science and Technology: Measurement of Interative Computing: Methodology and Application.

    Science.gov (United States)

    Cotton, Ira W.

    This dissertation reports the development and application of a new methodology for the measurement and evaluation of interactive computing, applied to either the users of an interactive computing system or to the system itself, including the service computer and any communications network through which the service is delivered. The focus is on the…

  8. Additive Manufacturing Technology Development Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The 3D Printing In Zero-G (3D Print) technology demonstration project is a proof-of-concept test designed to assess the properties of melt deposition modeling...

  9. Influence of Strategic Management Project Portfolio in Technological Development

    OpenAIRE

    Bitencourt, Lorene Carvalho; Garcez, Marcos Paixão

    2013-01-01

    This text aims to present a case of a multinational company that acts in construction and furniture markets. For three years ago the company had implemented an area of portfolio project management with objective of using strategic criteria to select project that contributes with technologic development of the company. The methodology of this study was grounded in Castro and Carvalho theoretical reference for analyze the implementation process and the tools used by portfolio management. The re...

  10. Development of Pollution Prevention Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Polle, Juergen [Brooklyn College, The City University of New York (CUNY), Brooklyn, New York, (United States); Sanchez-Delgado, Roberto [Brooklyn College, The City University of New York (CUNY), Brooklyn, New York, (United States)

    2013-12-30

    This project investigated technologies that may reduce environmental pollution. This was a basic research/educational project addressing two major areas: A. In the algae research project, newly isolated strains of microalgae were investigated for feedstock production to address the production of renewable fuels. An existing collection of microalgae was screened for lipid composition to determine strains with superior composition of biofuel molecules. As many microalgae store triacylglycerides in so-called oil bodies, selected candidate strains identified from the first screen that accumulate oil bodies were selected for further biochemical analysis, because almost nothing was known about the biochemistry of these oil bodies. Understanding sequestration of triacylglycerides in intracellular storage compartments is essential to developing better strains for achieving high oil productivities by microalgae. At the onset of the project there was almost no information available on how to obtain detailed profiles of lipids from strains of microalgae. Our research developed analytical methods to determine the lipid profiles of novel microalgal strains. The project was embedded into other ongoing microalgal projects in the Polle laboratory. The project benefited the public, because students were trained in cell cultivation and in the operation of state-of-the-art analytical equipment. In addition, students at Brooklyn College were introduced into the concept of a systems biology approach to study algal biofuels production. B. A series of new nanostructured catalysts were synthesized, and characterized by a variety of physical and chemical methods. Our catalyst design leads to active nanostructures comprising small metal particles in intimate contact with strongly basic sites provided by the supports, which include poly(4-vinylpyridine), magnesium oxide, functionalized multi-walled carbon nanotubes, and graphene oxide. The new materials display a good potential as catalysts

  11. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-05-15

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  12. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-11-04

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  13. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-09-30

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  14. Development of Risk Management Technology/Development of Risk-Informed Application Technology

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Joon Eon; Kim, K. Y.; Ahn, K. I.; Lee, Y. H.; Lim, H. G.; Jung, W. S.; Choi, S. Y.; Han, S. J.; Ha, J. J.; Hwang, M. J.; Park, S. Y.; Yoon, C

    2007-06-15

    This project aims at developing risk-informed application technologies to enhance the safety and economy of nuclear power plant altogether. For this, the Integrated Level 1 and 2 PSA model is developed. In addition, the fire and internal flooding PSA models are improved according to the PSA standard of U.S.A. To solve the issues of domestic PSA model, the best-estimate thermal hydraulic analyses are preformed for the ATWS and LSSB. In order to reduce the uncertainty of PSA, several new PSA technologies are developed: (1) more exact quantification of large fault tree, (2) importance measure including the effects of external PSA. As feasibility studies of Option 2 and 3, the class of 6 systems' SSC are re-classified based on the risk information and the sensitivity analyses is performed for the EDG starting time, respectively. It is also improved that the methodology to identify the vital area of NPP. The research results of this project can be used in the regulatory body and the industry projects for risk-informed applications.

  15. History of nuclear technology development in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Yamashita, Kiyonobu, E-mail: yamashita.kiyonobu@jaea.go.jp [Visiting Professor, at the Faculty of Petroleum and Renewable Energy Engineering, University Teknologi Malaysia Johor Bahru 81310 (Malaysia); General Advisor Nuclear HRD Centre, Japan Atomic Energy Agency, TOKAI-mura, NAKA-gun, IBARAKI-ken, 319-1195 (Japan)

    2015-04-29

    Nuclear technology development in Japan has been carried out based on the Atomic Energy Basic Act brought into effect in 1955. The nuclear technology development is limited to peaceful purposes and made in a principle to assure their safety. Now, the technologies for research reactors radiation application and nuclear power plants are delivered to developing countries. First of all, safety measures of nuclear power plants (NPPs) will be enhanced based on lesson learned from TEPCO Fukushima Daiichi NPS accident.

  16. EMI Architecture and Technology Development Plan

    CERN Document Server

    Balazs, K.

    2013-01-01

    This document provides a brief overview of the EMI architecture and the technology development directions presented by the four EMI technology areas and by EMI partners. The report represents the final revision of EMI technology planning covering a time period beyond the project end.

  17. Assessing Community Informatics: A Review of Methodological Approaches for Evaluating Community Networks and Community Technology Centers.

    Science.gov (United States)

    O'Neil, Dara

    2002-01-01

    Analyzes the emerging community informatics evaluation literature to develop an understanding of the indicators used to gauge project impacts in community networks and community technology centers. The study finds that community networks and community technology center assessments fall into five key areas: strong democracy; social capital;…

  18. Liner Technology Program. Volume 3. Liner Development Methodology Manual

    Science.gov (United States)

    1982-05-01

    alkenylsuccinic acids or anhydrides are available. As branched curing agents, DDI and GTRO are among the candidates. 4.1.3 Oxidatively-Stable System ...polarity polymers are carboxyl- or hydroxyl-terminated hydrocatbon I - systems cured with isocyanates or epoxides. The use of imidc epoxy - cured * ! systems ...ester linkages produced by the epoxy cure are the least subject to hydrolytic attack. " 4.1.7 Branched Chain Systems Polymers containing branched

  19. Clean Technology Evaluation & Workforce Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Patricia Glaza

    2012-12-01

    The overall objective of the Clean Technology Evaluation portion of the award was to design a process to speed up the identification of new clean energy technologies and match organizations to testing and early adoption partners. The project was successful in identifying new technologies targeted to utilities and utility technology integrators, in developing a process to review and rank the new technologies, and in facilitating new partnerships for technology testing and adoption. The purpose of the Workforce Development portion of the award was to create an education outreach program for middle & high-school students focused on clean technology science and engineering. While originally targeting San Diego, California and Cambridge, Massachusetts, the scope of the program was expanded to include a major clean technology speaking series and expo as part of the USA Science & Engineering Festival on the National Mall in Washington, D.C.

  20. Lunar Surface Systems Supportability Technology Development Roadmap

    Science.gov (United States)

    Oeftering, Richard C.; Struk, Peter M.; Green, Jennifer L.; Chau, Savio N.; Curell, Philip C.; Dempsey, Cathy A.; Patterson, Linda P.; Robbins, William; Steele, Michael A.; DAnnunzio, Anthony; Meseroll, Robert; Quiter, John; Shannon, Russell; Easton, John W.; Madaras, Eric I.; BrownTaminger, Karen M.; Tabera, John T.; Tellado, Joseph; Williams, Marth K.; Zeitlin, Nancy P.

    2011-01-01

    The Lunar Surface Systems Supportability Technology Development Roadmap is a guide for developing the technologies needed to enable the supportable, sustainable, and affordable exploration of the Moon and other destinations beyond Earth. Supportability is defined in terms of space maintenance, repair, and related logistics. This report considers the supportability lessons learned from NASA and the Department of Defense. Lunar Outpost supportability needs are summarized, and a supportability technology strategy is established to make the transition from high logistics dependence to logistics independence. This strategy will enable flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. The supportability roadmap defines the general technology selection criteria. Technologies are organized into three categories: diagnostics, test, and verification; maintenance and repair; and scavenge and recycle. Furthermore, "embedded technologies" and "process technologies" are used to designate distinct technology types with different development cycles. The roadmap examines the current technology readiness level and lays out a four-phase incremental development schedule with selection decision gates. The supportability technology roadmap is intended to develop technologies with the widest possible capability and utility while minimizing the impact on crew time and training and remaining within the time and cost constraints of the program.

  1. Technology Development Roadmaps - a Systematic Approach to Maturing Needed Technologies

    Energy Technology Data Exchange (ETDEWEB)

    John W. Colllins; Layne Pincock

    2010-07-01

    Abstract. Planning and decision making represent important challenges for all projects. This paper presents the steps needed to assess technical readiness and determine the path forward to mature the technologies required for the Next Generation Nuclear Plant. A Technology Readiness Assessment is used to evaluate the required systems, subsystems, and components (SSC) comprising the desired plant architecture and assess the SSCs against established Technology Readiness Levels (TRLs). A validated TRL baseline is then established for the proposed physical design. Technology Development Roadmaps are generated to define the path forward and focus project research and development and engineering tasks on advancing the technologies to increasing levels of maturity. Tasks include modeling, testing, bench-scale demonstrations, pilot-scale demonstrations, and fully integrated prototype demonstrations. The roadmaps identify precise project objectives and requirements; create a consensus vision of project needs; provide a structured, defensible, decision-based project plan; and, minimize project costs and schedules.

  2. Oil heat technology research and development

    Energy Technology Data Exchange (ETDEWEB)

    Kweller, E.R. [Department of Energy, Washington, DC (United States); McDonald, R.J. [Brookhaven National Lab., Upton, NY (United States)

    1995-04-01

    The purpose of this United States Department of Energy (DOE)/Brookhaven National Laboratory (BNL) program is to develop a technology base for advancing the state-of-the-art related to oilfired combustion equipment. The major thrust is through technology based research that will seek new knowledge leading to improved designs and equipment optimization. The Combustion Equipment space Conditioning Technology program currently deals exclusively with residential and small commercial building oil heat technology.

  3. Development of MMIS design technology for integral reactor

    Energy Technology Data Exchange (ETDEWEB)

    Koo, In Soo; Park, H. Y.; Lee, C. K. and others

    1999-03-01

    The objective of this study is to establish the concept design of the SMART MMIS through the setup of a structure and design concept of MMIS, the development of design methodology, and essential technologies for MMIS considering computer based digital technologies and human factors. Main activities of this study divided into three categories such as the development of conceptual design and requirement of the SMART I and C, the development of conceptual design and requirement of the SMART MMI, and essential technology for the MMIS. The results of main activities that have been performed during the study are as follows; 1) The review of licensing requirements and operating experience of existing plants. 2) The establishment of a system design concept about development strategy, basic functions and requirements, and applicable technology through the adoption of digital technology and human factorsengineering. 3) The accomplishment of function, structure, and design requirement of each MMIS through the performance of conceptual design on system structure and actuation logic using function analysis. It is necessary to develop and apply new technologies for the MMIS design compatible with the design basis of SMART. Considered essential technologies for the MMIS in this study are 1) the development of a signal validation algorithm and sensor diagnosis technique 2) the development of a soft controller for operator's action 3) the establishment of a data communication structure for MMIS architecture 4) the development of an information optimization basis and automatic start-up algorithm 5) the development of sensor reduction requirements 6) the development of a qualification method of digital equipment for applied digital technology and commercial grade items. (author)

  4. 3rd International Conference on Simulation and Modeling Methodologies, Technologies and Applications

    CERN Document Server

    Koziel, Slawomir; Kacprzyk, Janusz; Leifsson, Leifur; Ören, Tuncer

    2015-01-01

    This book includes extended and revised versions of a set of selected papers from the 3rd International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2013) which was co-organized by the Reykjavik University (RU) and sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC). SIMULTECH 2013 was held in cooperation with the ACM SIGSIM - Special Interest Group (SIG) on SImulation and Modeling (SIM), Movimento Italiano Modellazione e Simulazione (MIMOS) and AIS Special Interest Group on Modeling and Simulation (AIS SIGMAS) and technically co-sponsored by the Society for Modeling & Simulation International (SCS), Liophant Simulation, Simulation Team and International Federation for Information Processing (IFIP). This proceedings brings together researchers, engineers, applied mathematicians and practitioners working in the advances and applications in the field of system simulation.

  5. Process optimization of rolling for zincked sheet technology using response surface methodology and genetic algorithm

    Science.gov (United States)

    Ji, Liang-Bo; Chen, Fang

    2017-07-01

    Numerical simulation and intelligent optimization technology were adopted for rolling and extrusion of zincked sheet. By response surface methodology (RSM), genetic algorithm (GA) and data processing technology, an efficient optimization of process parameters for rolling of zincked sheet was investigated. The influence trend of roller gap, rolling speed and friction factor effects on reduction rate and plate shortening rate were analyzed firstly. Then a predictive response surface model for comprehensive quality index of part was created using RSM. Simulated and predicted values were compared. Through genetic algorithm method, the optimal process parameters for the forming of rolling were solved. They were verified and the optimum process parameters of rolling were obtained. It is feasible and effective.

  6. Radioactive Dry Process Material Treatment Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. J.; Hung, I. H.; Kim, K. K. (and others)

    2007-06-15

    The project 'Radioactive Dry Process Material Treatment Technology Development' aims to be normal operation for the experiments at DUPIC fuel development facility (DFDF) and safe operation of the facility through the technology developments such as remote operation, maintenance and pair of the facility, treatment of various high level process wastes and trapping of volatile process gases. DUPIC Fuel Development Facility (DFDF) can accommodate highly active nuclear materials, and now it is for fabrication of the oxide fuel by dry process characterizing the proliferation resistance. During the second stage from march 2005 to February 2007, we carried out technology development of the remote maintenance and the DFDF's safe operation, development of treatment technology for process off-gas, and development of treatment technology for PWR cladding hull and the results was described in this report.

  7. Innovative Technology Development Program. Final summary report

    Energy Technology Data Exchange (ETDEWEB)

    Beller, J.

    1995-08-01

    Through the Office of Technology Development (OTD), the U.S. Department of Energy (DOE) has initiated a national applied research, development, demonstration, testing, and evaluation program, whose goal has been to resolve the major technical issues and rapidly advance technologies for environmental restoration and waste management. The Innovative Technology Development (ITD) Program was established as a part of the DOE, Research, Development, Demonstration, Testing, and Evaluation (RDDT&E) Program. The plan is part of the DOE`s program to restore sites impacted by weapons production and to upgrade future waste management operations. On July 10, 1990, DOE issued a Program Research and Development Announcement (PRDA) through the Idaho Operations Office to solicit private sector help in developing innovative technologies to support DOE`s clean-up goals. This report presents summaries of each of the seven projects, which developed and tested the technologies proposed by the seven private contractors selected through the PRDA process.

  8. Open Technology Development: Roadmap Plan

    Science.gov (United States)

    2006-04-01

    Linux Apache MySql (PHP/ Perl /Python) integrated services. This standardized "stack" of open source technologies enables robust web based information...ACTD Office • Sue Payton, AS&C Office • LTG Robert M. Shea, Joint Staff, J-6 • David Scantling, OSD, Business Transformation Office • Fritz

  9. Advances in Artificial Neural Networks – Methodological Development and Application

    Directory of Open Access Journals (Sweden)

    Yanbo Huang

    2009-08-01

    Full Text Available Artificial neural networks as a major soft-computing technology have been extensively studied and applied during the last three decades. Research on backpropagation training algorithms for multilayer perceptron networks has spurred development of other neural network training algorithms for other networks such as radial basis function, recurrent network, feedback network, and unsupervised Kohonen self-organizing network. These networks, especially the multilayer perceptron network with a backpropagation training algorithm, have gained recognition in research and applications in various scientific and engineering areas. In order to accelerate the training process and overcome data over-fitting, research has been conducted to improve the backpropagation algorithm. Further, artificial neural networks have been integrated with other advanced methods such as fuzzy logic and wavelet analysis, to enhance the ability of data interpretation and modeling and to avoid subjectivity in the operation of the training algorithm. In recent years, support vector machines have emerged as a set of high-performance supervised generalized linear classifiers in parallel with artificial neural networks. A review on development history of artificial neural networks is presented and the standard architectures and algorithms of artificial neural networks are described. Furthermore, advanced artificial neural networks will be introduced with support vector machines, and limitations of ANNs will be identified. The future of artificial neural network development in tandem with support vector machines will be discussed in conjunction with further applications to food science and engineering, soil and water relationship for crop management, and decision support for precision agriculture. Along with the network structures and training algorithms, the applications of artificial neural networks will be reviewed as well, especially in the fields of agricultural and biological

  10. The Electronic Commerce Integrated Development Methodology For Small Firms

    OpenAIRE

    Stapleton, Larry; Woods, Jaqueline; McDonald, T.J.

    2005-01-01

    Electronic Commerce (EC) technologies have the ability to reshape industry structure, and in doing so modify the rules of competition, which, in turn, lead to new methods of competing (Thong, 1999; Hawkins et al., 1999). The technological shift from traditional methods to Internet-based methods of trading has facilitated cost and competitive advantage (Auger and Gallaugher, 1997). However, to maximise EC gains it is critical that organisations understand the phases of technological assimila...

  11. The Pre-Conceptual Map Methodology: Development and Application

    Science.gov (United States)

    Hipsky, Shellie

    2006-01-01

    The objective of this article is to present the Pre-Conceptual Map methodology as a formalized way to identify, document, and utilize preconceived assumptions on the part of the researcher in qualitative inquiry. This technique can be used as a stand alone method or in conjunction with other qualitative techniques (i.e., naturalistic inquiry).…

  12. KSC Education Technology Research and Development Plan

    Science.gov (United States)

    Odell, Michael R. L.

    2003-01-01

    Educational technology is facilitating new approaches to teaching and learning science, technology, engineering, and mathematics (STEM) education. Cognitive research is beginning to inform educators about how students learn providing a basis for design of more effective learning environments incorporating technology. At the same time, access to computers, the Internet and other technology tools are becoming common features in K-20 classrooms. Encouraged by these developments, STEM educators are transforming traditional STEM education into active learning environments that hold the promise of enhancing learning. This document illustrates the use of technology in STEM education today, identifies possible areas of development, links this development to the NASA Strategic Plan, and makes recommendations for the Kennedy Space Center (KSC) Education Office for consideration in the research, development, and design of new educational technologies and applications.

  13. Barriers to using consumer science information in food technology innovations: An exploratory study using Delphi methodology

    Directory of Open Access Journals (Sweden)

    Marian E. Raley

    2016-04-01

    Full Text Available Food technology innovation has the potential to deliver many benefits to society, although some technologies have been problematic in terms of public acceptance. In promoting the commercial success of innovative technological processes and resultant products it will be important to incorporate information relating to consumer preferences and concerns during their development. The barriers to the utilisation of consumer information during technological development was explored using a two round Delphi study involving 75 experts with an interest in new food technology (food technologists and consumer scientists. There was overall agreement that consumer information should be used in technology implementation and product design, and that good communication between key actors at pivotal stages during the development of new food technologies and products was important. However disciplinary differences were perceived to be a barrier to communication, as were difficulties associated with producing consumer information usable by food technologists. A strategy to improve inter-disciplinary communication is proposed, involving the creation of multi-disciplinary teams working together throughout the development project’s duration, including those with interdisciplinary experience. Deficiencies in the specification of the information required from consumer scientists need to be overcome. Consumer science results need to be concrete and presented as salient to and usable by food technologists.

  14. Mobile Technology Use by People Experiencing Multiple Sclerosis Fatigue: Survey Methodology

    Science.gov (United States)

    Reay, Nicholas

    2017-01-01

    Background Fatigue is one of the most commonly reported symptoms of multiple sclerosis (MS). It has a profound impact on all spheres of life, for people with MS and their relatives. It is one of the key precipitants of early retirement. Individual, group, and Internet cognitive behavioral therapy–based approaches to supporting people with MS to manage their fatigue have been shown to be effective. Objective The aim of this project was to (1) survey the types of mobile devices and level of Internet access people with MS use or would consider using for a health intervention and (2) characterize the levels of fatigue severity and their impact experienced by the people in our sample to provide an estimate of fatigue severity of people with MS in New Zealand. The ultimate goal of this work was to support the future development of a mobile intervention for the management of fatigue for people with MS. Methods Survey methodology using an online questionnaire was used to assess people with MS. A total of 51 people with MS participated. The average age was 48.5 years, and the large majority of the sample (77%) was female. Results Participants reported significant levels of fatigue as measured with the summary score of the Neurological Fatigue Index (mean 31.4 [SD 5.3]). Most (84%) respondents scored on average more than 3 on the fatigue severity questions, reflecting significant fatigue. Mobile phone usage was high with 86% of respondents reporting having a mobile phone; apps were used by 75% of respondents. Most participants (92%) accessed the Internet from home. Conclusions New Zealand respondents with MS experienced high levels of both fatigue severity and fatigue impact. The majority of participants have a mobile device and access to the Internet. These findings, along with limited access to face-to-face cognitive behavioral therapy–based interventions, create an opportunity to develop a mobile technology platform for delivering a cognitive behavioral therapy

  15. Impact of Technology and Culture on Home Economics and Nutrition Science Education in Developing Countries

    Science.gov (United States)

    Aburime, M. O.; Uhomoibhi, J. O.

    2010-01-01

    Purpose: The purpose of this paper is to examine and report on the impact of technology and culture on home economics and nutrition science education in developing countries with a focus on Nigeria. Design/methodology/approach: Globally and most especially in developing countries, the advent of information and communication technologies has meant…

  16. Technological Developments in Networking, Education and Automation

    CERN Document Server

    Elleithy, Khaled; Iskander, Magued; Kapila, Vikram; Karim, Mohammad A; Mahmood, Ausif

    2010-01-01

    "Technological Developments in Networking, Education and Automation" includes a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the following areas: Computer Networks: Access Technologies, Medium Access Control, Network architectures and Equipment, Optical Networks and Switching, Telecommunication Technology, and Ultra Wideband Communications. Engineering Education and Online Learning: including development of courses and systems for engineering, technical and liberal studies programs; online laboratories; intelligent

  17. Latest development of display technologies

    Science.gov (United States)

    Gao, Hong-Yue; Yao, Qiu-Xiang; Liu, Pan; Zheng, Zhi-Qiang; Liu, Ji-Cheng; Zheng, Hua-Dong; Zeng, Chao; Yu, Ying-Jie; Sun, Tao; Zeng, Zhen-Xiang

    2016-09-01

    In this review we will focus on recent progress in the field of two-dimensional (2D) and three-dimensional (3D) display technologies. We present the current display materials and their applications, including organic light-emitting diodes (OLEDs), flexible OLEDs quantum dot light emitting diodes (QLEDs), active-matrix organic light emitting diodes (AMOLEDs), electronic paper (E-paper), curved displays, stereoscopic 3D displays, volumetric 3D displays, light field 3D displays, and holographic 3D displays. Conventional 2D display devices, such as liquid crystal devices (LCDs) often result in ambiguity in high-dimensional data images because of lacking true depth information. This review thus provides a detailed description of 3D display technologies.

  18. Microhole Drilling Tractor Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Western Well Tool

    2007-07-09

    In an effort to increase the U.S. energy reserves and lower costs for finding and retrieving oil, the USDOE created a solicitation to encourage industry to focus on means to operate in small diameter well-Microhole. Partially in response to this solicitation and because Western Well Tool's (WWT) corporate objective to develop small diameter coiled tubing drilling tractor, WWT responded to and was awarded a contract to design, prototype, shop test, and field demonstrate a Microhole Drilling Tractor (MDT). The benefit to the oil industry and the US consumer from the project is that with the MDT's ability to facilitate Coiled Tubing drilled wells to be 1000-3000 feet longer horizontally, US brown fields can be more efficiently exploited resulting in fewer wells, less environmental impact, greater and faster oil recovery, and lower drilling costs. Shortly after award of the contract, WWT was approached by a major oil company that strongly indicated that the specified size of a tractor of 3.0 inches diameter was inappropriate and that immediate applications for a 3.38-inch diameter tractor would substantially increase the usefulness of the tool to the oil industry. Based on this along with an understanding with the oil company to use the tractor in multiple field applications, WWT applied for and was granted a no-cost change-of-scope contract amendment to design, manufacture, assemble, shop test and field demonstrate a prototype a 3.38 inch diameter MDT. Utilizing existing WWT tractor technology and conforming to an industry developed specification for the tool, the Microhole Drilling Tractor was designed. Specific features of the MDT that increase it usefulness are: (1) Operation on differential pressure of the drilling fluid, (2) On-Off Capability, (3) Patented unique gripping elements (4) High strength and flexibility, (5) Compatibility to existing Coiled Tubing drilling equipment and operations. The ability to power the MDT with drilling fluid results in a

  19. Miniature-MCA technology developments

    Energy Technology Data Exchange (ETDEWEB)

    Halbig, J.K.; Klosterbuer, S.F.; Stephens, M.M.; Biddle, R.S.

    1991-12-31

    We have recently reduced the size of multichannel analyzers (MCAs) and have implemented more features in hardware to relieve software requirements. We built and tested a spectroscopy grade, 4096-channel MCA. Exclusive of amplifier and power supply, it fits on two boards each approximately 7 by 15 cm. This paper discusses the features and performance of the analyzer and some reasonable applications of these technologies.

  20. KNOWLEDGE SYNTHESIS IN TECHNOLOGY DEVELOPMENT

    Institute of Scientific and Technical Information of China (English)

    Yukihiro YAMASHITA; Yoshiteru NAKAMORI; Andrzej P. WIERZBICKI

    2009-01-01

    This paper introduces a knowledge construction model called the i-System for knowledge integration and creation and its relation to the new concept of the Creative Space. The five ontological elements of the i-System are Intelligence, Involvement, Imagination, Intervention, and Integration corresponding to five diverse dimensions of the Creative Space. The paper discusses the meanings and functions of these dimensions in knowledge integration and creation, and presents applications of the i-System to technology roadmapping and archiving.

  1. Towards a Tool-based Development Methodology for Pervasive Computing Applications

    CERN Document Server

    Cassou, Damien; Consel, Charles; Balland, Emilie; 10.1109/TSE.2011.107

    2012-01-01

    Despite much progress, developing a pervasive computing application remains a challenge because of a lack of conceptual frameworks and supporting tools. This challenge involves coping with heterogeneous devices, overcoming the intricacies of distributed systems technologies, working out an architecture for the application, encoding it in a program, writing specific code to test the application, and finally deploying it. This paper presents a design language and a tool suite covering the development life-cycle of a pervasive computing application. The design language allows to define a taxonomy of area-specific building-blocks, abstracting over their heterogeneity. This language also includes a layer to define the architecture of an application, following an architectural pattern commonly used in the pervasive computing domain. Our underlying methodology assigns roles to the stakeholders, providing separation of concerns. Our tool suite includes a compiler that takes design artifacts written in our language as...

  2. Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)

    Energy Technology Data Exchange (ETDEWEB)

    Moe, Wayne Leland [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-05-01

    This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory

  3. Advanced Reactor Technologies - Regulatory Technology Development Plan (RTDP)

    Energy Technology Data Exchange (ETDEWEB)

    Moe, Wayne L.

    2017-08-23

    This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory

  4. Aligning Technology Education Teaching with Brain Development

    Science.gov (United States)

    Katsioloudis, Petros

    2015-01-01

    This exploratory study was designed to determine if there is a level of alignment between technology education curriculum and theories of intellectual development. The researcher compared Epstein's Brain Growth Theory and Piaget's Status of Intellectual Development with technology education curriculum from Australia, England, and the United…

  5. Social and Technological Development in Context

    DEFF Research Database (Denmark)

    Koch, Christian

    1997-01-01

    This papers studies the processes developing technology and its social "sorroundings", the social networks. Positions in the debate on technological change is discussed. A central topic is the enterprise external development and decision processes and their interplay with the enterprise internal...

  6. Enhancing the Transition Capability of Danish Biomass Technology By Applying a Futures Study Backcasting Methodology on the Biogas Sector.

    Directory of Open Access Journals (Sweden)

    Rikke Lybæk

    2013-04-01

    Full Text Available This paper discusses how the Danish biogas sector can achieve the political goals set outby the Danish government, in order to turn around the currently weak implementation ofthe technology. Biogas technology provides many environmental and energy relatedbenefits, but the transition capability of the technology has so far not been supported by astable policy pushing the sector in the right direction. The paper argues that a moreholistic and consistent support for the biogas sector must be developed, enhancing itsindependence from shifting Danish policy regimes. This could be achieved by applying abackcasting methodology in combination with future research activities which areidentified by means of energy chain analysis. The paper stresses that future Danish biogasresearch should be applied all along the sector’s energy chain, and not just in parts of it,looking at enhancement of the transition capability within ‘Resources’,‘Technology/Conversion’ and ‘Distribution/End-use’. The future research activities,proposed in this paper are interconnected and thought backwards with the goal ofcreating reachable aims for achieving the political targets set forth before the year 2020and 2050.

  7. TECHNOLOGICAL DEVELOPMENT MANAGEMENT UNDER GLOBALIZATION CONDITIONS

    Directory of Open Access Journals (Sweden)

    Vasyl H. Gerasymchuk

    2007-10-01

    Full Text Available The research reveals a studying of scientific and technical development of enterprise in the context of globalization processes. The authors placed high emphasis on the specification of peculiarities and theoretical aspects of scientific and technical development of enterprise, the studying of impact of scientific and technical factors of economic development. The R&D financing in Ukraine and the strong and weak sides of application of model of technological development at international technology transfer are analyzed in the paper.

  8. Creation of a System of Systems Portfolio Management and Technology Selection Methodology

    Science.gov (United States)

    2010-05-01

    traditional Ao, defined at the fleet level and computed as the average of squadron or unit level Ao. In this fashion , a clear definition of Am for...the SMM to incorporate a Performance Level Monitoring ( PLM ) methodology. The PLM is being developed to understand if the performance will satisfy...changing existing capabilities within a MP. Performance Level Monitoring Explained The PLM strives to apply a modified TPM type approach to a SoS

  9. Development of technologies for solar energy utilization

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    With relation to the development of photovoltaic power systems for practical use, studies were made on thin-substrate polycrystalline solar cells and thin-film solar cells as manufacturing technology for solar cells for practical use. The technological development for super-high efficiency solar cells was also being advanced. Besides, the research and development have been conducted of evaluation technology for photovoltaic power systems and systems to utilize the photovoltaic power generation and peripheral technologies. The demonstrative research on photovoltaic power systems was continued. The international cooperative research on photovoltaic power systems was also made. The development of a manufacturing system for compound semiconductors for solar cells was carried out. As to the development of solar energy system technologies for industrial use, a study of elemental technologies was first made, and next the development of an advanced heat process type solar energy system was commenced. In addition, the research on passive solar systems was made. An investigational study was carried out of technologies for solar cities and solar energy snow melting systems. As international joint projects, studies were made of solar heat timber/cacao drying plants, etc. The paper also commented on projects for international cooperation for the technological development of solar energy utilization systems. 26 figs., 15 tabs.

  10. Development of Food Preservation and Processing Technologies by Radiation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun (and others)

    2007-07-15

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

  11. Methodology matters: measuring urban spatial development using alternative methods

    OpenAIRE

    Daniel E Orenstein; Amnon Frenkel; Faris Jahshan

    2014-01-01

    The effectiveness of policies implemented to prevent urban sprawl has been a contentious issue among scholars and practitioners for at least two decades. While disputes range from the ideological to the empirical, regardless of the subject of dispute, participants must bring forth reliable data to buttress their claims. In this study we discuss several sources of complexity inherent in measuring sprawl. We then exhibit how methodological decisions can lead to disparate results regarding the q...

  12. A Comparison of Various Software Development Methodologies: Feasibility and Methods of Integration

    Directory of Open Access Journals (Sweden)

    Samir Abou El-Seoud

    2016-12-01

    Full Text Available System development methodologies which have being used in the academic and commercial environments during last two decades have advantages and disadvantages. Researchers had tried to identify objectives, scope …etc. of the methodologies by following different approaches. Each approach has its Limitation, specific interest, coverage …etc. In this paper, we tried to perform a comparative study of those methodologies which are popular and commonly used in banking and commercial environment. We tried in our study to determine objectives, scope, tools and other features of the methodologies. We also, tried to determine how and to what extent the methodologies incorporate the facilities such as project management, cost benefit analysis, documentation …etc. One of the most important aspects of our study was how to integrate the methodologies and develop a global methodology which covers the complete span of the software development life cycle? A prototype system which integrates the selected methodologies has been developed. The developed system helps analysts and designers how to choose suitable tools or to obtain guidelines on what to do in a particular situation. The prototype system has been tested during the development of a software for an ATM “Auto Teller Machine” by selecting and applying SASD methodology during software development. This resulted in the development of high quality and well documented software system.

  13. Space Technology Mission Directorate: Game Changing Development

    Science.gov (United States)

    Gaddis, Stephen W.

    2015-01-01

    NASA and the aerospace community have deep roots in manufacturing technology and innovation. Through it's Game Changing Development Program and the Advanced Manufacturing Technology Project NASA develops and matures innovative, low-cost manufacturing processes and products. Launch vehicle propulsion systems are a particular area of interest since they typically comprise a large percentage of the total vehicle cost and development schedule. NASA is currently working to develop and utilize emerging technologies such as additive manufacturing (i.e. 3D printing) and computational materials and processing tools that could dramatically improve affordability, capability, and reduce schedule for rocket propulsion hardware.

  14. Development of an Assessment Methodology for Demonstrating Usability, Technical Maturity, and Operational Benefits of Advanced Medical Technology (Developpement d’une Methodologie d’Evaluation Permettant de Demontrer la Facilite d’Utilisation, la Maturite Technique et les Avantages Operationnels des Technologies Medicales Evoluees)

    Science.gov (United States)

    2010-09-01

    at the initiative of Dr Theodore von Kármán, a leading aerospace scientist, who early on recognised the importance of scientific support for the...2.1 The Need for Technology Assessment of Medical Technologies within NATO 2-1 2.2 Health Technology Assessment ( HTA ) 2-3 2.3 Technology Readiness...the general concept of Health Technology Assessment ( HTA ), which was determined to not be suitable in its entirety for NATO use. We discovered that

  15. Development of coal energy utilization technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    Coal liquefaction produces new and clean energy by performing hydrogenation, decomposition and liquefaction on coal under high temperatures and pressures. NEDO has been developing bituminous coal liquefaction technologies by using a 150-t/d pilot plant. It has also developed quality improving and utilization technologies for liquefied coal, whose practical use is expected. For developing coal gasification technologies, construction is in progress for a 200-t/d pilot plant for spouted bed gasification power generation. NEDO intends to develop coal gasification composite cycle power generation with high efficiency and of environment harmonious type. This paper summarizes the results obtained during fiscal 1994. It also dwells on technologies to manufacture hydrogen from coal. It further describes development of technologies to manufacture methane and substituting natural gas (SNG) by hydrogenating and gasifying coal. The ARCH process can select three operation modes depending on which of SNG yield, thermal efficiency or BTX yield is targeted. With respect to promotion of coal utilization technologies, description is given on surveys on development of next generation technologies for coal utilization, and clean coal technology promotion projects. International coal utilization and application projects are also described. 9 figs., 3 tabs.

  16. Technologies for a sustainable development; Technologies pour un developpement durable

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    The European Event on Technology (EET), a recurrent annual event since 1992, is a major meeting opportunity for researchers and engineers as well as private and public decision-makers, on technologies, their evolution and their industrial and social implications. In less than a decade, sustainable development has become both an economic and a political priority. It was urgent and legitimate that those who are the mainsprings should take hold of the subject and give it technological content, estimate its costs and define clear timetables. The debates consist of: plenary sessions on environmental, social and economic stakes of sustainable development and the challenges for, and commitment of engineers, managers and politicians with respect to these goals; and workshops, which provide an overview of recently acquired or upcoming technologies developed by sector: energy, transports, new information technologies, new industrial manufacturing technologies (materials, products, services), waste management, global environment monitoring, water management, bio-technologies, and innovation management. This document brings together the different talks given by the participants. Among these, the following ones fall into the energy and environment scope: energy efficiency of buildings: towards energy autonomy; superconductors enable in new millennium for electric power industry; advanced gas micro-turbine-driven generator technology; environmental and technical challenges of an offshore wind farm; future nuclear energy systems; modelling combustion in engines: progress and prospects for reducing emissions; on-board computers: reduction in consumption and emissions of engine-transmission units for vehicles; polymer-lithium batteries: perspectives for zero-emission traction; hybrid vehicles and energy/environmental optimization: paths and opportunities; fuel cells and zero-emission: perspectives and developments; global change: causes, modeling and economic issues; the GMES

  17. A Sustainability Assessment Methodology for Prioritizing the Technologies of Groundwater Contamination Remediation

    DEFF Research Database (Denmark)

    An, Da; Xi, Beidou; Wang, Yue

    2016-01-01

    More and more groundwater has 23 been polluted recently, and technologies for groundwater contamination remediation are of vital importance; however, it is usually difficult for the users to select the most suitable technology among multiple alternatives. In order to address this, this study aims...... at developing a sustainability assessment framework for prioritizing the technologies for groundwater contamination remediation by combining the concept of sustainability and multi-criteria decision making (MCDM) method. A criterion system which consists of six criteria in three aspects has been proposed...... for sustainability assessment of technologies for groundwater contamination remediation, and a novel MCDM method by combining the logarithmic fuzzy preference programming based fuzzy analytic hierarchy process and the improved ELECTRE method has been developed for prioritizing the alternatives. In order...

  18. Taiwan Perspective: Developing Smart Living Technology

    Directory of Open Access Journals (Sweden)

    Chih-Kung Lee

    2011-09-01

    Full Text Available The pursuit of Smart Living Technology is a recent trend in which technology is applied to daily life to increase efficiency, affordability and sustainability. The principle behind Smart Living Technology is that technology should be used to advance the needs of human beings and to increase the quality of life by the power of human creativity while at the same time sustaining the environment for future generations. As such, intelligent networks should be adopted to provide humans with full information to control an individual’s personal environment. Wireless technology can play a key role in enabling smart energy monitoring by allowing consumers to make more informed choices and to connect products and devices to a coordinated management system. The development of Smart Living Technology is based on the concept of user driven innovations. Various Living Labs have been established around the world as development centers for extension of this Smart Living Technology. In this paper, the background and current developments of Smart Living Technology are reviewed, followed by real examples taking place in Taiwan. Finally, the focus and future plan for Taiwan are discussed including a strategy for further development of Smart Living Technology in Taiwan.

  19. APPLICATION OF METHODOLOGY OF STRATEGIC PLANNING IN DEVELOPING NATIONAL PROGRAMMES ON DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Inna NOVAK

    2015-07-01

    Full Text Available Actuality: The main purpose of strategic planning is that long-term interests of sustainable development of a market economy require the use of effective measures of state regulation of economic and social processes. Objective: The aim of the article is determined to analyze the development of strategic planning methodology and practical experience of its application in the design of national development programs. Methods: When writing the article the following research methods were used: analysis and synthesis, target-oriented and monographic. Results: In Ukraine at the level of state and local government authorities strategies of development of branches, regions, cities, etc. are being developed but given the lack of state funding a unified investment strategy of the country is not developed. After analyzing development of the strategic planning methodology and examples of its application in the design of state development programs we identified the need to develop an investment strategy of the state (sectors, regions, etc., as due to defined directions and guidelines of the activity it will increase the investment level in the country and ensure national strategy “Ukraine-2020”.

  20. Evaluating Colombian SMEs’ technological innovation: Part 1: conceptual basis, evaluation methodology and characterisation of innovative companies

    OpenAIRE

    Óscar Fernando Castellanos Domínguez; Luz Marina Torres; Aida Mayerly Fúquene Montañez

    2010-01-01

    Innovative processes currently constitute one of the most important alternatives for increasing organisations’ levels of competitiveness and productivity. The Colombian state (being conscious of this) has generated mechanisms aimed at encouraging technological and innovative development activities in SMEs, as was the case with the Colombian Prize for Entrepreneurial Technological Innovation for SME (Innova) 2006. The experience acquired through the technical evaluation of such prize was a ...

  1. Methodology for Analyzing and Developing Information Management Infrastructure to Support Telerehabilitation

    Directory of Open Access Journals (Sweden)

    Andi Saptono

    2009-09-01

    Full Text Available The proliferation of advanced technologies led researchers within the Rehabilitation Engineering Research Center on Telerehabilitation (RERC-TR to devise an integrated infrastructure for clinical services using the University of Pittsburgh (PITT model. This model describes five required characteristics for a telerehabilitation (TR infrastructure: openness, extensibility, scalability, cost-effectiveness, and security. The infrastructure is to deliver clinical services over distance to improve access to health services for people living in underserved or remote areas. The methodological approach to design, develop, and employ this infrastructure is explained and detailed for the remote wheelchair prescription project, a research task within the RERC-TR. The availability of this specific clinical service and personnel outside of metropolitan areas is limited due to the lack of specialty expertise and access to resources. The infrastructure is used to deliver expertise in wheeled mobility and seating through teleconsultation to remote clinics, and has been successfully deployed to five rural clinics in Western Pennsylvania. Keywords: Telerehabilitation, Information Management, Infrastructure Development Methodology, Videoconferencing, Online Portal, Database

  2. Methodology for identifying materials constraints to implementation of solar energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Litchfield, J.W.; Watts, R.L.; Gurwell, W.E.; Hartley, J.N.; Bloomster, C.H.

    1978-07-01

    A materials assessment methodology for identifying specific critical material requirements that could hinder the implementation of solar energy has been developed and demonstrated. The methodology involves an initial screening process, followed by a more detailed materials assessment. The detailed assessment considers such materials concerns and constraints as: process and production constraints, reserve and resource limitations, lack of alternative supply sources, geopolitical problems, environmental and energy concerns, time constraints, and economic constraints. Data for 55 bulk and 53 raw materials are currently available on the data base. These materials are required in the example photovoltaic systems. One photovoltaic system and thirteen photovoltaic cells, ten solar heating and cooling systems, and two agricultural and industrial process heat systems have been characterized to define their engineering and bulk material requirements.

  3. A pattern-based methodology for optimizing stitches in double-patterning technology

    Science.gov (United States)

    Wang, Lynn T.; Madhavan, Sriram; Dai, Vito; Capodieci, Luigi

    2015-03-01

    A pattern-based methodology for optimizing stitches is developed based on identifying stitch topologies and replacing them with pre-characterized fixing solutions in decomposed layouts. A topology-based library of stitches with predetermined fixing solutions is built. A pattern-based engine searches for matching topologies in the decomposed layouts. When a match is found, the engine opportunistically replaces the predetermined fixing solution: only a design rule check error-free replacement is preserved. The methodology is demonstrated on a 20nm layout design that contains over 67 million, first metal layer stitches. Results show that a small library containing 3 stitch topologies improves the stitch area regularity by 4x.

  4. Engendering Development: Some Methodological Perspectives on Child Labour

    Directory of Open Access Journals (Sweden)

    Erica Burman

    2006-01-01

    Full Text Available In this article I address when and why it is useful to focus on gender in the design and conceptualisation of developmental psychological research. Since methodological debates treated in the abstract tend to lack both the specificity and rigour that application to a particular context or topic imports, I take a particular focus for my discussion: child labour. In doing so I hope to highlight the analytical and practical gains of bringing gendered agendas alongside, and into, developmental research. While child labour may seem a rather curious topic for discussion of developmental psychological research practice, this article will show how it indicates with particular clarity issues that mainstream psychological research often occludes or forgets. In particular, I explore analytical and methodological benefits of exploring the diverse ways gender structures notions of childhood, alongside the developmental commonalities and asymmetries of gender and age as categories. I suggest that the usual assumed elision between women and children is often unhelpful for both women and children. Instead, an analytical attention to the shifting forms and relations of children's work facilitates more differentiated perspectives on how its meanings reflect economic and cultural (including gendered conditions, and so attends better to social inequalities. These inequalities also structure the methodological conditions and paradigms for research with children, and so the article finishes by elaborating from this discussion of child labour four key principles for engendering psychological research with and about children, which also have broader implications for conceptualisations of the relations between gender, childhood, culture and families. URN: urn:nbn:de:0114-fqs060111

  5. Development of nuclear transmutation technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Won Seok; Song, Tae Young; Yoo, Jae Kwon; Choi, Byung Ho; Shin, Hee Sung; Gil, Chung Sup; Kim, Jung Do

    1997-08-01

    A basic characteristics and neutronic code development for accelerator driven subcritical reactor have been performed. In the field of basic characteristic study, the world-wide technical trends for a subcritical reactor has been investigated and some new directions for the subcritical system development were investigated. For the analysis of subcritical reactor core, a Montecarlo depletion code was developed by combining LAHET code with ORIGEN2 code. In addition, one-point kinetics equation for subcritical reactor programmed in order to analyze the dynamic behavior of subcritical core. (author). 26 tabs., 49 figs.

  6. Methodology for analyzing and developing information management infrastructure to support telerehabilitation.

    Science.gov (United States)

    Saptono, Andi; Schein, Richard M; Parmanto, Bambang; Fairman, Andrea

    2009-01-01

    The proliferation of advanced technologies led researchers within the Rehabilitation Engineering Research Center on Telerehabilitation (RERC-TR) to devise an integrated infrastructure for clinical services using the University of Pittsburgh (PITT) model. This model describes five required characteristics for a telerehabilitation (TR) infrastructure: openness, extensibility, scalability, cost-effectiveness, and security. The infrastructure is to deliver clinical services over distance to improve access to health services for people living in underserved or remote areas. The methodological approach to design, develop, and employ this infrastructure is explained and detailed for the remote wheelchair prescription project, a research task within the RERC-TR. The availability of this specific clinical service and personnel outside of metropolitan areas is limited due to the lack of specialty expertise and access to resources. The infrastructure is used to deliver expertise in wheeled mobility and seating through teleconsultation to remote clinics, and has been successfully deployed to five rural clinics in Western Pennsylvania.

  7. On the development of a strength prediction methodology for fibre metal laminates in pin bearing

    Science.gov (United States)

    Krimbalis, Peter Panagiotis

    The development of Fibre Metal Laminates (FMLs) for application into aerospace structures represents a paradigm shift in airframe and material technology. By consolidating both monolithic metallic alloys and fibre reinforced composite layers, a new material structure is born exhibiting desired qualities emerging from its heterogeneous constituency. When mechanically fastened via pins, bolts and rivets, these laminated materials develop damage and ultimately fail via mechanisms that were not entirely understood and different than either their metallic or composite constituents. The development of a predictive methodology capable of characterizing how FMLs fastened with pins behave and fail would drastically reduce the amount of experimentation necessary for material qualification and be an invaluable design tool. The body of this thesis discusses the extension of the characteristic dimension approach to FMLs and the subsequent development of a new failure mechanism as part of a progressive damage finite element (FE) modeling methodology with yielding, delamination and buckling representing the central tenets of the new mechanism. This yielding through delamination buckling (YDB) mechanism and progressive FE model were investigated through multiple experimental studies. The experimental investigations required the development of a protocol with emphasis on measuring deformation on a local scheme in addition to a global one. With the extended protocol employed, complete characterization of the material response was possible and a new definition for yield in a pin bearing configuration was developed and subsequently extended to a tensile testing configuration. The performance of this yield definition was compared directly to existing definitions and was shown to be effective in both quasi-isotropic and orthotropic materials. The results of the experiments and FE simulations demonstrated that yielding (according to the new definition), buckling and delamination

  8. Coherent Architecture Development as a Basis for Technology Development

    DEFF Research Database (Denmark)

    Ravn, Poul Martin

    coherence. Despite the acceptance and results presented in multiple studies from the application of architectures, the research on architecture work in a technology development context is limited. Technologies are often developed and represented in the form of product sub-systems that are made available......The subject of this PhD thesis is architecture-centered design. It elaborates especially on two specific areas: the coherence in architectures in a technology development context and the identification of critical development areas via property-based reasoning, based on an understanding of cette...... for product developers. Technologies, which in their infancy indicate a 'jack of all trades, master of none', have a risk of being developed without a clearly defined need or identification of which products it can be used in. A common approach for developing such a technology includes exploration of what...

  9. Development of krypton recovery and storage technology

    Energy Technology Data Exchange (ETDEWEB)

    Hayashi, Shin-ichiro; Shoji, Hisashi; Kurihara, Takayuki; Kawashima, Nobuyoshi [Japan Nuclear Cycle Development Inst., Tokai Works, Tokai, Ibaraki (Japan); Osawa, Toshiyuki; Yamato, Haruo; Aizawa, Toshihiro [Sanko Inc., Tokyo (Japan)

    2002-12-01

    The Krypton-Recovery Development Facility was constructed as a pilot plant which has a piratical capacity at Tokai Reprocessing Plant. Various tests such as performance confirmation corresponding to parameter changing of each process by cold test, safety assurance of confinement performance of radioactive gas etc. and confirmation of the krypton recovery rate by connecting run with the reprocessing process were executed in order to develop recovery and storage technology of radioactive krypton from the shearing and dissolution process off-gas aiming to reduce the release of radioactivity to the environment. As a result, it was assured that krypton recovery rate with a cryogenic distillation was beyond the target value of 90% as krypton recovery technology, and storage technology by high pressure cylinder method was established as storage technology of recovered krypton. The immobilization technology of recovered krypton that is necessary for long term storage by ion implantation method is under development. (author)

  10. A methodological combined framework for roadmapping biosensor research: a fault tree analysis approach within a strategic technology evaluation frame.

    Science.gov (United States)

    Siontorou, Christina G; Batzias, Fragiskos A

    2014-03-01

    Biosensor technology began in the 1960s to revolutionize instrumentation and measurement. Despite the glucose sensor market success that revolutionized medical diagnostics, and artificial pancreas promise currently the approval stage, the industry is reluctant to capitalize on other relevant university-produced knowledge and innovation. On the other hand, the scientific literature is extensive and persisting, while the number of university-hosted biosensor groups is growing. Considering the limited marketability of biosensors compared to the available research output, the biosensor field has been used by the present authors as a suitable paradigm for developing a methodological combined framework for "roadmapping" university research output in this discipline. This framework adopts the basic principles of the Analytic Hierarchy Process (AHP), replacing the lower level of technology alternatives with internal barriers (drawbacks, limitations, disadvantages), modeled through fault tree analysis (FTA) relying on fuzzy reasoning to count for uncertainty. The proposed methodology is validated retrospectively using ion selective field effect transistor (ISFET) - based biosensors as a case example, and then implemented prospectively membrane biosensors, putting an emphasis on the manufacturability issues. The analysis performed the trajectory of membrane platforms differently than the available market roadmaps that, considering the vast industrial experience in tailoring and handling crystallic forms, suggest the technology path of biomimetic and synthetic materials. The results presented herein indicate that future trajectories lie along with nanotechnology, and especially nanofabrication and nano-bioinformatics, and focused, more on the science-path, that is, on controlling the natural process of self-assembly and the thermodynamics of bioelement-lipid interaction. This retained the nature-derived sensitivity of the biosensor platform, pointing out the differences

  11. Technology assessment of geothermal energy resource development

    Energy Technology Data Exchange (ETDEWEB)

    1975-04-15

    Geothermal state-of-the-art is described including geothermal resources, technology, and institutional, legal, and environmental considerations. The way geothermal energy may evolve in the United States is described; a series of plausible scenarios and the factors and policies which control the rate of growth of the resource are presented. The potential primary and higher order impacts of geothermal energy are explored, including effects on the economy and society, cities and dwellings, environmental, and on institutions affected by it. Numerical and methodological detail is included in appendices. (MHR)

  12. Optimization of the processing technology of Fructus Arctii by response surface methodology.

    Science.gov (United States)

    Liu, Qi-Di; Qin, Kun-Ming; Shen, Bao-Jia; Cai, Hao; Cai, Bao-Chang

    2015-03-01

    The present study was designed to optimize the processing of Fructus Arctii by response surface methodology (RSM). Based on single factor studies, a three-variable, three-level Box-Behnken design (BBD) was used to monitor the effects of independent variables, including processing temperature and time, on the dependent variables. Response surfaces and contour plots of the contents of total lignans, chlorogenic acid, arctiin, and arctigenin were obtained through ultraviolet and visible (UV-Vis) monitoring and high performance liquid chromatography (HPLC). Fructus Arctii should be processed under heating in a pot at 311 °C, medicine at 119 °C for 123s with flipping frequently. The experimental values under the optimized processing technology were consistent with the predicted values. In conclusion, RSM is an effective method to optimize the processing of traditional Chinese medicine (TCM).

  13. Technological Microbiology: Development and Applications

    Science.gov (United States)

    Vitorino, Luciana C.; Bessa, Layara A.

    2017-01-01

    Over thousands of years, modernization could be predicted for the use of microorganisms in the production of foods and beverages. However, the current accelerated pace of new food production is due to the rapid incorporation of biotechnological techniques that allow the rapid identification of new molecules and microorganisms or even the genetic improvement of known species. At no other time in history have microorganisms been so present in areas such as agriculture and medicine, except as recognized villains. Currently, however, beneficial microorganisms such as plant growth promoters and phytopathogen controllers are required by various agricultural crops, and many species are being used as biofactories of important pharmacological molecules. The use of biofactories does not end there: microorganisms have been explored for the synthesis of diverse chemicals, fuel molecules, and industrial polymers, and strains environmentally important due to their biodecomposing or biosorption capacity have gained interest in research laboratories and in industrial activities. We call this new microbiology Technological Microbiology, and we believe that complex techniques, such as heterologous expression and metabolic engineering, can be increasingly incorporated into this applied science, allowing the generation of new and improved products and services. PMID:28539920

  14. Technological opportunities and paths of development

    DEFF Research Database (Denmark)

    Plichta, Kirsten

    1993-01-01

    in the industry. 6) It is argued that such paths of incremental improvement at the industry level may be an outcome of a) the dynamics that produce the technological opportunities; b) the institutions that govern decisions and expectations and c) the criteria by which the chooses between different firms......Executive summary: 1) The technological development of firms in an industry is influenced by the opportunities for improving product and process, their ability to identify such opportunities and their ability to appropriate the benefit of the development effort. 2) Firms' historically developed...... technological knowledge, their production, development and other routines as well prior investments in products and production equipment play an important role with regard to the technological opportunities that firms' identify and select for development. 3) Because history matters and because firms are bounded...

  15. Integrated Micro Product and Technology Development

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    The paper addresses the issues of integrated micro product and technology development. The implications of the decisions in the design phase on the subsequent manufacturing processes are considered vital. A coherent process chain is a necessary prerequisite for the realisation of the industrial...... potential of micro technology....

  16. Cognitive development in advanced mathematics using technology

    Science.gov (United States)

    Tall, David

    2000-12-01

    This paper considers cognitive development in mathematics and its relationship with computer technology, with special emphasis on the use of visual imagery and symbols and the later shift to formal axiomatic theories. At each stage, empirical evidence is presented to show how these forms of thinking are enhanced, changed, or impeded by the use of technology.

  17. Integrated Micro Product and Technology Development

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    The paper addresses the issues of integrated micro product and technology development. The implications of the decisions in the design phase on the subsequent manufacturing processes are considered vital. A coherent process chain is a necessary prerequisite for the realisation of the industrial...... potential of micro technology....

  18. Development of PLC Technology in China

    Institute of Scientific and Technical Information of China (English)

    Liu Jianming; Cuiwei

    2005-01-01

    In China there built a large scale of power line communication (Abbr. PLC)testing network. This paper presents the research and development on PLC technology in China and also the application and popularization of PLC in Chinese market. At the end, the next focal points of PLC technology research are deeply discussed.

  19. China's High-technology Standards Development

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    There are several major technology standards, including audio video coding (AVS), automotive electronics, third generation (3G) mobile phones, mobile television, wireless networks and digital terrestrial television broadcasting, that have been released or are currently under development in China. This article offers a detailed analysis of each standard and studies their impact on China's high-technology industry.

  20. Analysis of Software Development Methodologies to Build Safety Software Applications for the SATEX-II: A Mexican Experimental Satellite

    Science.gov (United States)

    Aguilar Cisneros, Jorge; Vargas Martinez, Hector; Pedroza Melendez, Alejandro; Alonso Arevalo, Miguel

    2013-09-01

    Mexico is a country where the experience to build software for satellite applications is beginning. This is a delicate situation because in the near future we will need to develop software for the SATEX-II (Mexican Experimental Satellite). SATEX- II is a SOMECyTA's project (the Mexican Society of Aerospace Science and Technology). We have experienced applying software development methodologies, like TSP (Team Software Process) and SCRUM in other areas. Then, we analyzed these methodologies and we concluded: these can be applied to develop software for the SATEX-II, also, we supported these methodologies with SSP-05-0 Standard in particular with ESA PSS-05-11. Our analysis was focusing on main characteristics of each methodology and how these methodologies could be used with the ESA PSS 05-0 Standards. Our outcomes, in general, may be used by teams who need to build small satellites, but, in particular, these are going to be used when we will build the on board software applications for the SATEX-II.

  1. [Pharmaceutical technology: development and research].

    Science.gov (United States)

    Traisnel, M

    1994-06-01

    Production of pharmaceutics cannot be compared to the manufacture of consumer goods: pharmaceutical manufacturing is the study and bulk manufacture of the ingredients from which medicines are made, and is concerned with the mixing, preparing, packing, of the ingredients into a dosage form for the patient, in according to the good manufacturing practices (GMP). Development and manufacture are not discrete activities but links in a single chain of activity. Research and development, pharmaceutical training, regulatory requirements: these concepts are present with three ways: bioavailability, targeting and compliance.

  2. Methodologies, Tools and New Developments for E-Learning

    Science.gov (United States)

    Pontes, Elvis, Ed.; Silva, Anderson, Ed.; Guelfi, Adilson, Ed.; Kofuji, Sergio Takeo, Ed.

    2012-01-01

    With the resources provided by communication technologies, E-learning has been employed in multiple universities, as well as in wide range of training centers and schools. This book presents a structured collection of chapters, dealing with the subject and stressing the importance of E-learning. It shows the evolution of E-learning, with…

  3. Methodological support to develop interoperable applications for pervasive healthcare

    NARCIS (Netherlands)

    Cardoso de Moraes, João Luís

    2014-01-01

    The healthcare model currently being used in most countries will soon be inadequate, due to the increasing care costs of a growing population of elderly people, the rapid increase of chronic diseases, the growing demand for new treatments and technologies, and the relative decrease in the number of

  4. The Development Methodology of the UML Electronic Guide

    Directory of Open Access Journals (Sweden)

    N.A. Magariu

    2006-09-01

    Full Text Available A technological model for realization of the electronic guide to UML language is considered. This model includes description of peculiarities of using the special graphic editor for constructing the UML diagrams, XML vocabularies (XMI, DocBook, SVG, XSLT for representing the text and diagrams and JavaScript code for constructing the tests.

  5. Development of hydrogen storage technologies

    CSIR Research Space (South Africa)

    Langmi, Henrietta W

    2015-10-01

    Full Text Available The use of hydrogen to deliver energy for cars, portable devices and buildings is seen as one of the key steps to reduce greenhouse gas emissions. South Africa’s national hydrogen strategy, HySA, aims to develop and guide innovation along the value...

  6. Developments in Science and Technology

    Science.gov (United States)

    1979-01-01

    dation by Navy Antarctic Development Squadron Sixco im) rtu ;R Rsusn(rgnGaut (VXE-6). Figure 1 shows the polar research aircraft at Center), h rbnadm...perits inu /t sialler quantities of winu- (see Ref. I foi a surs e)). In particular, it found earl) spherit. tracers to be Ietec tedl than isas pretimish

  7. Technology development multidimensional review for engineering and technology managers

    CERN Document Server

    Neshati, Ramin; Watt, Russell; Eastham, James

    2014-01-01

    Developing new products, services, systems, and processes has become an imperative for any firm expecting to thrive in today’s fast-paced and hyper-competitive environment.  This volume integrates academic and practical insights to present fresh perspectives on new product development and innovation, showcasing lessons learned on the technological frontier.  The first part emphasizes decision making.  The second part focuses on technology evaluation, including cost-benefit analysis, material selection, and scenarios. The third part features in-depth case studies to present innovation management tools, such as customer needs identification, technology standardization, and risk management. The fourth part highlights important international trends, such as globalization and outsourcing. Finally the fifth part explores social and political aspects.

  8. Developing AAC technologies: a personal story and philosophy.

    Science.gov (United States)

    Newell, A F; Alm, N

    1994-01-01

    Research into and development of augmentative and alternative communication (AAC) technologies is an exciting but complex field. The development of a technologically based system which will be an alternative to, or will augment, the speech modality for the interpersonal communication needs of people with communication dysfunction is not an easy task. This is only a young field and thus much of the research methodology is not yet well defined. It is also a growing field, and one to which we would wish to attract new practitioners, and provide appropriate guidance to them. In any technological development project, it is important to define clearly a number of parameters of the project. These are: the client group; the knowledge base needed to solve the problems; the potential technologies that will help and their characteristics; and the time scales envisaged for completion of the research. The authors have been part of a research team working in this field for many years, and, in this paper, they will examine three research strategies which they have found particularly beneficial, illustrating the concepts discussed mainly by reference to personal experiences. The paper concentrates on a relatively narrow definition of technology-that which is often referred to as 'high technology' or information technology. This is not to deny, in any way, the importance to the AAC field of solutions based on other technology, and the authors would hope that some of the comments in the paper are also appropriate to researchers who are working with systems and techniques which do not depend on these technologies.

  9. Geo energy research and development: technology transfer

    Energy Technology Data Exchange (ETDEWEB)

    Traeger, R.K.

    1982-03-01

    Sandia Geo Energy Programs related to geothermal, coal, oil and gas, and synfuel resources have provided a useful mechanism for transferring laboratory technologies to private industry. Significant transfer of hardware, computer programs, diagnostics and instrumentation, advanced materials, and in situ process understanding has occurred through US/DOE supported programs in the past five years. The text briefly reviews the technology transfer procedures and summarizes 32 items that have been transferred and another 20 technologies that are now being considered for possible transfer to industry. A major factor in successful transfer has been personal interactions between Sandia engineers and the technical staff from private industry during all aspects of the technology development.

  10. Space power development impact on technology requirements

    Science.gov (United States)

    Cassidy, J. F.; Fitzgerald, T. J.; Gilje, R. I.; Gordon, J. D.

    1986-01-01

    The paper is concerned with the selection of a specific spacecraft power technology and the identification of technology development to meet system requirements. Requirements which influence the selection of a given technology include the power level required, whether the load is constant or transient in nature, and in the case of transient loads, the time required to recover the power, and overall system safety. Various power technologies, such as solar voltaic power, solar dynamic power, nuclear power systems, and electrochemical energy storage, are briefly described.

  11. Nuclear Technology for the Sustainable Development Goals

    Science.gov (United States)

    Darby, Iain

    2017-01-01

    Science, technology and innovation will play a crucial role in helping countries achieve the ambitious Sustainable Development Goals (SDGs). Since the discovery of nuclear fission in the 1930s, the peaceful applications of nuclear technology have helped many countries improve crops, fight pests, advance health, protect the environment and guarantee a stable supply of energy. Highlighting the goals related to health, hunger, energy and the environment, in this presentation I will discuss how nuclear technology contributes to the SDGs and how nuclear technology can further contribute to the well-being of people, help protect the planet and boost prosperity.

  12. Single-step affinity purification of enzyme biotherapeutics: a platform methodology for accelerated process development.

    Science.gov (United States)

    Brower, Kevin P; Ryakala, Venkat K; Bird, Ryan; Godawat, Rahul; Riske, Frank J; Konstantinov, Konstantin; Warikoo, Veena; Gamble, Jean

    2014-01-01

    Downstream sample purification for quality attribute analysis is a significant bottleneck in process development for non-antibody biologics. Multi-step chromatography process train purifications are typically required prior to many critical analytical tests. This prerequisite leads to limited throughput, long lead times to obtain purified product, and significant resource requirements. In this work, immunoaffinity purification technology has been leveraged to achieve single-step affinity purification of two different enzyme biotherapeutics (Fabrazyme® [agalsidase beta] and Enzyme 2) with polyclonal and monoclonal antibodies, respectively, as ligands. Target molecules were rapidly isolated from cell culture harvest in sufficient purity to enable analysis of critical quality attributes (CQAs). Most importantly, this is the first study that demonstrates the application of predictive analytics techniques to predict critical quality attributes of a commercial biologic. The data obtained using the affinity columns were used to generate appropriate models to predict quality attributes that would be obtained after traditional multi-step purification trains. These models empower process development decision-making with drug substance-equivalent product quality information without generation of actual drug substance. Optimization was performed to ensure maximum target recovery and minimal target protein degradation. The methodologies developed for Fabrazyme were successfully reapplied for Enzyme 2, indicating platform opportunities. The impact of the technology is significant, including reductions in time and personnel requirements, rapid product purification, and substantially increased throughput. Applications are discussed, including upstream and downstream process development support to achieve the principles of Quality by Design (QbD) as well as integration with bioprocesses as a process analytical technology (PAT).

  13. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2004-05-12

    This Technical Progress Report describes progress made on the seventeen subprojects awarded in the first year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of project activity only. The U.S. is the largest producer of mining products in the world. In 1999, U.S. mining operations produced $66.7 billion worth of raw materials that contributed a total of $533 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium--Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno--that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation (2) Solid-liquid separation (3) Chemical/Biological Extraction (4) Modeling and Control, and (5) Environmental Control.

  14. Scenario Methodology for Modelling of Future Landscape Developments as Basis for Assessing Ecosystem Services

    Directory of Open Access Journals (Sweden)

    Matthias Rosenberg

    2014-04-01

    Full Text Available The ecosystems of our intensively used European landscapes produce a variety of natural goods and services for the benefit of humankind, and secure the basics and quality of life. Because these ecosystems are still undergoing fundamental changes, the interest of the society is to know more about future developments and their ecological impacts. To describe and analyze these changes, scenarios can be developed and an assessment of the ecological changes can be carried out subsequently. In the project „Landscape Saxony 2050“; a methodology for the construction of exploratory scenarios was worked out. The presented methodology provides a possibility to identify the driving forces (socio-cultural, economic and ecological conditions of the landscape development. It allows to indicate possible future paths which lead to a change of structures and processes in the landscape and can influence the capability to provide ecosystem services. One essential component of the applied technique is that an approach for the assessment of the effects of the landscape changes on ecosystem services is integrated into the developed scenario methodology. Another is, that the methodology is strong designed as participatory, i.e. stakeholders are integrated actively. The method is a seven phase model which provides the option for the integration of the stakeholders‘ participation at all levels of scenario development. The scenario framework was applied to the district of Görlitz, an area of 2100 sq km located at the eastern border of Germany. The region is affected by strong demographic as well as economic changes. The core issue focused on the examination of landscape change in terms of biodiversity. Together with stakeholders, a trend scenario and two alternative scenarios were developed. The changes of the landscape structure are represented in story lines, maps and tables. On basis of the driving forces of the issue areas „cultural / social values“ and

  15. Solar cell materials developing technologies

    CERN Document Server

    Conibeer, Gavin J

    2014-01-01

    This book presents a comparison of solar cell materials, including both new materials based on organics, nanostructures and novel inorganics and developments in more traditional photovoltaic materials. It surveys the materials and materials trends in the field including third generation solar cells (multiple energy level cells, thermal approaches and the modification of the solar spectrum) with an eye firmly on low costs, energy efficiency and the use of abundant non-toxic materials.

  16. Development of Nuclear Analytical Technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Yong Joon; Kim, J. Y.; Sohn, S. C. (and others)

    2007-06-15

    The pre-treatment and handling techniques for the micro-particles in swipe samples were developed for the safeguards purpose. The development of screening technique for the swipe samples has been established using the nuclear fission track method as well as the alpha track method. The laser ablation system to take a nuclear particle present in swipe was designed and constructed for the determination of the enrichment factors for uranium or plutonium, and its performance was tested in atmosphere as well as in vacuum. The optimum conditions for the synthesis of silica based micro-particles were obtained for mass production. The optimum ion exchange resin was selected and the optimum conditions for the uranium adsorption in resin bead technique were established for the development of the enrichment factor for nuclear particles in swipe. The established technique was applied to the swipe taken directly from the nuclear facility and also to the archive samples of IAEA's environmental swipes. The evaluation of dose rate of neutron and secondary gamma-ray for the radiation shields were carried out to design the NIPS system, as well as the evaluation of the thermal neutron concentration effect by the various reflectors. D-D neutron generator was introduced as a neutron source for the NIPS system to have more advantages such as easier control and moderation capability than the {sup 252}Cf source. Simulated samples for explosive and chemical warfare were prepared to construct a prompt gamma-ray database. Based on the constructed database, a computer program for the detection of illicit chemical and nuclear materials was developed using the MATLAB software.

  17. Nigerian Journal of Technological Development: Editorial Policies

    African Journals Online (AJOL)

    Nigerian Journal of Technological Development: Editorial Policies. Journal Home > About the ... Frequency. This journal published two issues, in one volume per year. ... Dept. of Mechanical Engineering,. Mississipi State University,. USA. Prof.

  18. Readiness for banking technologies in developing countries

    African Journals Online (AJOL)

    banking, internet banking and automated teller machine (ATM) banking to ... businesses in developing countries are building unique ways to market products ... characteristics such as technology readiness, it is therefore important for banks in.

  19. Advances in space technology: the NSBRI Technology Development Team.

    Science.gov (United States)

    Maurer, R H; Charles, H K; Pisacane, V L

    2002-01-01

    As evidenced from Mir and other long-duration space missions, the space environment can cause significant alterations in the human physiology that could prove dangerous for astronauts. The NASA programme to develop countermeasures for these deleterious human health effects is being carried out by the National Space Biomedical Research Institute (NSBRI). The NSBRI has 12 research teams, ten of which are primarily physiology based, one addresses on-board medical care, and the twelfth focuses on technology development in support of the other research teams. This Technology Development (TD) Team initially supported four instrumentation developments: (1) an advanced, multiple projection, dual energy X ray absorptiometry (AMPDXA) scanning system: (2) a portable neutron spectrometer; (3) a miniature time-of-flight mass spectrometer: and (4) a cardiovascular identification system. Technical highlights of the original projects are presented along with an introduction to the five new TD Team projects being funded by the NSBRI.

  20. Advances in space technology: the NSBRI Technology Development Team

    Science.gov (United States)

    Maurer, R. H.; Charles, H. K. Jr; Pisacane, V. L.

    2002-01-01

    As evidenced from Mir and other long-duration space missions, the space environment can cause significant alterations in the human physiology that could prove dangerous for astronauts. The NASA programme to develop countermeasures for these deleterious human health effects is being carried out by the National Space Biomedical Research Institute (NSBRI). The NSBRI has 12 research teams, ten of which are primarily physiology based, one addresses on-board medical care, and the twelfth focuses on technology development in support of the other research teams. This Technology Development (TD) Team initially supported four instrumentation developments: (1) an advanced, multiple projection, dual energy X ray absorptiometry (AMPDXA) scanning system: (2) a portable neutron spectrometer; (3) a miniature time-of-flight mass spectrometer: and (4) a cardiovascular identification system. Technical highlights of the original projects are presented along with an introduction to the five new TD Team projects being funded by the NSBRI.

  1. Coal conversion processes and analysis methodologies for synthetic fuels production. [technology assessment and economic analysis of reactor design for coal gasification

    Science.gov (United States)

    1979-01-01

    Information to identify viable coal gasification and utilization technologies is presented. Analysis capabilities required to support design and implementation of coal based synthetic fuels complexes are identified. The potential market in the Southeast United States for coal based synthetic fuels is investigated. A requirements analysis to identify the types of modeling and analysis capabilities required to conduct and monitor coal gasification project designs is discussed. Models and methodologies to satisfy these requirements are identified and evaluated, and recommendations are developed. Requirements for development of technology and data needed to improve gasification feasibility and economies are examined.

  2. Technological Development and Software Piracy

    OpenAIRE

    Romeu, Andrés; Martínez Sánchez, Francisco

    2015-01-01

    In this paper, we analyze the differences in piracy rates from one country to another. Like previous papers on the topic, we find that more developed countries have lower incentives for pirating. Unlike previous papers, we find that the piracy rate is positively correlated with the tax burden rate but negatively correlated with the domestic market size and exports over GDP. We also separate the impacts of education and R&D on piracy, and find two effects with opposite signs. Moreover, we find...

  3. An integrated methodology on the suitability of offshore sites for wind farm development

    Science.gov (United States)

    Patlakas, Platon; Galanis, George; Péray, Marie; Filipot, Jean-François; Kalogeri, Christina; Spyrou, Christos; Diamantis, Dimitris; Kallos, Gerorge

    2016-04-01

    During, the last decades the potential and interest in wind energy investments has been constantly increasing in the European countries. As technology changes rapidly, more and more areas can be identified as suitable for energy applications. Offshore wind farms perfectly illustrate how new technologies allow to build bigger, more efficient and resistant in extreme conditions wind power plants. The current work proposes an integrated methodology to determine the suitability of an offshore marine area for the development of wind farm structures. More specifically, the region of interest is evaluated based both on the natural resources, connected to the local environmental characteristics, and potential constrains set by anthropogenic or other activities. State of the art atmospheric and wave models and a 10-year hindcast database are utilized in conjunction with local information for a number of potential constrains, leading to a 5-scale suitability index for the whole area. In this way, sub regions are characterized, at a high resolution mode, as poorly or highly suitable for wind farm development, providing a new tool for technical/research teams and decision makers. In addition, extreme wind and wave conditions and their 50-years return period are analyzed and used to define the safety level of the wind farms structural characteristics.

  4. Contributions to the Development of a General Methodology for Innovation and Forecasting

    OpenAIRE

    Ionescu, Gabriela; Ion IONIŢĂ

    2011-01-01

    The paper presents authors’ contributions to the achievement of a first variant of the innovation and forecasting methodology. The various tools of TRIZ methodology (laws of systems development set for technical systems, the matrix of contradictions, the 40 inventive principles, the 39 parameters, Su-Field analysis, the method of the 9 screens etc) are already available, or can be customised to the specific type of the organization system. The TRIZ methodology for economics was embedded in a ...

  5. Contributions to the Development of a General Methodology for Innovation and Forecasting

    OpenAIRE

    Ionescu, Gabriela; Ion IONIŢĂ

    2011-01-01

    The paper presents authors’ contributions to the achievement of a first variant of the innovation and forecasting methodology. The various tools of TRIZ methodology (laws of systems development set for technical systems, the matrix of contradictions, the 40 inventive principles, the 39 parameters, Su-Field analysis, the method of the 9 screens etc) are already available, or can be customised to the specific type of the organization system. The TRIZ methodology for economics was embedded in a ...

  6. NASA Advanced Radiator Technology Development

    Science.gov (United States)

    Koester, J. Kent; Juhasz, Albert J.

    1994-07-01

    A practical implementation of the two-phase working fluid of lithium and NaK has been developed experimentally for pumped loop radiator designs. The benefits of the high heat capacity and low mass of lithium have been integrated with the shutdown capability enabled by the low freezing temperature of NaK by mixing these liquid metals directly. The stable and reliable start up and shutdown of a lithium/NaK pumped loop has been demonstrated through the development of a novel lithium freeze-separation technique within the flowing header ducts. The results of a highly instrumented liquid metal test loop are presented in which both lithium fraction as well as loop gravitational effects were varied over a wide range of values. Diagnostics based on dual electric probes are presented in which the convective behavior of the lithium component is directly measured during loop operation. The uniform distribution of the lithium after a freeze separation is verified by neutron radiography. The operating regime for reliable freeze/thaw flow behavior is described in terms of correlations based on dimensional analysis.

  7. Global Nuclear Energy Partnership Technology Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    David J. Hill

    2007-07-01

    This plan describes the GNEP Technology Demonstration Program (GNEP-TDP). It has been prepared to guide the development of integrated plans and budgets for realizing the domestic portion of the GNEP vision as well as providing the basis for developing international cooperation. Beginning with the GNEP overall goals, it describes the basic technical objectives for each element of the program, summarizes the technology status and identifies the areas of greatest technical risk. On this basis a proposed technology demonstration program is described that can deliver the required information for a Secretarial decision in the summer of 2008 and support construction of facilities.

  8. Survey of Technologies for Web Application Development

    CERN Document Server

    Doyle, Barry

    2008-01-01

    Web-based application developers face a dizzying array of platforms, languages, frameworks and technical artifacts to choose from. We survey, classify, and compare technologies supporting Web application development. The classification is based on (1) foundational technologies; (2)integration with other information sources; and (3) dynamic content generation. We further survey and classify software engineering techniques and tools that have been adopted from traditional programming into Web programming. We conclude that, although the infrastructure problems of the Web have largely been solved, the cacophony of technologies for Web-based applications reflects the lack of a solid model tailored for this domain.

  9. Developing Technological Capabilities in Agro-Industry

    DEFF Research Database (Denmark)

    Whitfield, Lindsay

    2012-01-01

    This article examines the emergence and trajectory of a new agro-industry in Ghana, the pineapple export industry, using the technological capabilities approach. It explains the limited expansion of the industry and its declining competitiveness in the face of new competition by looking at how...... Ghanaian exporters developed technological capabilities initially and the incentives and disincentives to building on those capabilities. The article argues that at the heart of the industry's crisis was an inability to further develop technological capabilities. The crisis had systemic features that have...

  10. Banking, Technology Workers and Their Career Development.

    Science.gov (United States)

    Armstrong, Lesley; West, Jim

    2001-01-01

    An Australian bank developed a four-stage career development strategy for information technology workers: (1) career coaching sessions with executives; (2) career coaching seminars for line managers and team leaders; (3) staff career planning workshops; and (4) online career development support. The program resulted in increased satisfaction,…

  11. The Public Sphere, Globalization and Technological Development

    OpenAIRE

    Tina Sikka

    2006-01-01

    Tina Sikka examines the emergence and transformation of Habermas's theory of the public sphere, looking at how this concept informs the debates around communication technologies in development. Development (2006) 49, 87–93. doi:10.1057/palgrave.development.1100277

  12. Capitalizing on App Development Tools and Technologies

    Science.gov (United States)

    Luterbach, Kenneth J.; Hubbell, Kenneth R.

    2015-01-01

    Instructional developers and others creating apps must choose from a wide variety of app development tools and technologies. Some app development tools have incorporated visual programming features, which enable some drag and drop coding and contextual programming. While those features help novices begin programming with greater ease, questions…

  13. A NEW PRODUCT DEVELOPMENT METHODOLOGY BASED ON PRODUCT MASTER MODEL%基于产品主模型的新产品开发方法论

    Institute of Scientific and Technical Information of China (English)

    袁清珂; 李建雨

    2006-01-01

    Product Master Model (PMM) Technology is a philosophy and methodology for organizing, managing and controlling product development processes, sharing the information and knowledge of the product and its processes. In this paper, the concept of PMM is proposes, the basic theory of PMM technologies is studied, the blackboard architecture of PMM is proposed,the product development process framework is explored, and the prototype system of PMM is developed.

  14. Development of life evaluation technology for nuclear power plant components

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin [Sungkyunkwan Univ., Seoul (Korea, Republic of); Kwon, J. D. [Yeungnam Univ., Gyeongsan (Korea, Republic of); Kang, K. J. [Chonnam National Univ., Gwangju (Korea, Republic of)] (and others)

    2001-03-15

    This research focuses on development of reliable life evaluation technology for nuclear power plant (NPP) components, and is divided into two parts, development of life evaluation systems for pressurized components and evaluation of applicability of emerging technology to operating plants. For the development of life evaluation system for nuclear pressure vessels, the following seven topics are covered: development of expert systems for integrity assessment of pressurized components, development of integrity evaluation systems of steam generator tubes, prediction of failure probability for NPP components based on probabilistic fracture mechanics, development of fatigue damage evaluation technique for plant life extension, domestic round robin analysis for pressurized thermal shock of reactor vessels, domestic round robin analysis of constructing P--T limit curves for reactor vessels, and development of data base for integrity assessment. For evaluation of applicability of emerging technology to operating plants, on the other hand, the following eight topics are covered: applicability of the Leak-Before-Break analysis to Cast S/S piping, collection of aged material tensile and toughness data for aged Cast S/S piping, finite element analyses for load carrying capacity of corroded pipes, development of Risk-based ISI methodology for nuclear piping, collection of toughness data for integrity assessment of bi-metallic joints, applicability of the Master curve concept to reactor vessel integrity assessment, measurement of dynamic fracture toughness, and provision of information related to regulation and plant life extension issues.

  15. Development of a standardised methodology for event impact ...

    African Journals Online (AJOL)

    ... Government (WCG) developed an Integrated Events Strategy for Cape Town and ... supporting events to maximise brand building potential and triple bottom line benefits. ... The WCG thus undertook research to develop a standardised set of ...

  16. Development of laser technology in Poland: 2016

    Science.gov (United States)

    Jankiewicz, Zdzisław; Jabczyński, Jan K.; Romaniuk, Ryszard S.

    2016-12-01

    The paper is an introduction to the volume of proceedings and a concise digest of works presented during the XIth National Symposium on Laser Technology (SLT2016) [1]. The Symposium is organized since 1984 every three years [2-8]. SLT2016 was organized by the Institute of Optoelectronics, Military University of Technology (IO, WAT) [9], Warsaw, with cooperation of Warsaw University of Technology (WUT) [10], in Jastarnia on 27-30 September 2016. Symposium Proceedings are traditionally published by SPIE [11-19]. The meeting has gathered around 150 participants who presented around 120 research and technical papers. The Symposium, organized every 3 years is a good portrait of laser technology and laser applications development in Poland at university laboratories, governmental institutes, company R&D laboratories, etc. The SLT also presents the current technical projects under realization by the national research, development and industrial teams. Topical tracks of the Symposium, traditionally divided to two large areas - sources and applications, were: laser sources in near and medium infrared, picosecond and femtosecond lasers, optical fiber lasers and amplifiers, semiconductor lasers, high power and high energy lasers and their applications, new materials and components for laser technology, applications of laser technology in measurements, metrology and science, military applications of laser technology, laser applications in environment protection and remote detection of trace substances, laser applications in medicine and biomedical engineering, laser applications in industry, technologies and material engineering.

  17. SMD Technology Development Story for NASA Annual Technology report

    Science.gov (United States)

    Seablom, Michael S.

    2017-01-01

    The role of the Science Mission Directorate (SMD) is to enable NASA to achieve its science goals in the context of the Nation's science agenda. SMD's strategic decisions regarding future missions and scientific pursuits are guided by Agency goals, input from the science community-including the recommendations set forth in the National Research Council (NRC) decadal surveys-and a commitment to preserve a balanced program across the major science disciplines. Toward this end, each of the four SMD science divisions-Heliophysics, Earth Science, Planetary Science, and Astrophysics-develops fundamental science questions upon which to base future research and mission programs. Often the breakthrough science required to answer these questions requires significant technological innovation-e.g., instruments or platforms with capabilities beyond the current state of the art. SMD's targeted technology investments fill technology gaps, enabling NASA to build the challenging and complex missions that accomplish groundbreaking science.

  18. International orientation on methodologies for modelling developments in road safety.

    NARCIS (Netherlands)

    Reurings, M.C.B. & Commandeur, J.J.F.

    2007-01-01

    This report gives an overview of the models developed in countries other than the Netherlands to evaluate past developments in road traffic safety and to obtain estimates of these developments in the future. These models include classical linear regression and loglinear models as applied in Great Br

  19. Kokum Fruit Bar Development via Response Surface Methodology (RSM.

    Directory of Open Access Journals (Sweden)

    Pritam Bafna

    2014-02-01

    Full Text Available A response surface methodology (RSM was used for the determination of optimum ingredients level to prepare kokum fruit bar. Kokum pulp was extracted using water extraction method at temperature (24.97ºC and time (30.42 min. The effects of ingredients levels on sensory parameters like texture, overall acceptability and calcium content of the prepared fruit bar were studied by employing a Box- Behnken Design (BBD. During the experimental trials the pulp quantity is kept fixed. The coefficient of determination R² for texture, overall acceptability and calcium content were 0.8298, 0.9239 and 0.9842 respectively. Analysis of variable (ANOVA performed on the experimental values showed that sugar and milk powder were the most important factors that affected characteristics of the kokum fruit bar as it exerted a highly significant influence (p < 0.05 on all the dependent variables. Based on surface and contour plots, optimum ingredients level for formation of kokum fruit bar were pulp, sugar, milk powder; 50g, 40g and 9.39g respectively.

  20. Development of the damage assessment methodology for ceiling elements

    Science.gov (United States)

    Nitta, Yoshihiro; Iwasaki, Atsumi; Nishitani, Akira; Wakatabe, Morimasa; Inai, Shinsuke; Ohdomari, Iwao; Tsutsumi, Hiroki

    2012-04-01

    This paper presents the basic concept of a damage assessment methodology for ceiling elements with the aid of smart sensor board and inspection robot. In this proposed system, the distributed smart sensor boards firstly detect the fact of damage occurrence. Next, the robot inspects the damage location and captures the photographic image of damage condition. The smart sensor board for the proposed system mainly consists of microcontroller, strain gage and LAN module. The inspection robot integrated into the proposed system has a wireless camera and wireless LAN device for receiving signal to manipulate itself. At first, the effectiveness of the smart sensor board and inspection robot is tested by experiments of a full-scale suspended ceiling utilizing shaking table facilities. The model ceiling is subjected to several levels of excitations and thus various levels of damages are caused. Next, this robot inspection scheme is applied to the ceiling of a real structure damaged by the 2011 off the pacific coast of Tohoku Earthquake. The obtained results indicate that the proposed system can detect the location and condition of the damage.

  1. Development of ultrasensitive spectroscopic analysis technology

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Hyung Ki; Song, K. S.; Kim, D. H.; Yang, K. H.; Jung, E. C.; Jeong, D. Y.; Yi, Y. J.; Lee, S. M.; Hong, K. H.; Han, J. M.; Yoo, B. D.; Rho, S. P.; Yi, J. H.; Park, H. M.; Cha, B. H.; Nam, S. M.; Lee, J. M.

    1997-09-01

    For the development of the laser initiated high resolution, ultra sensitive analysis technology following field of researches have been performed. (1) Laser resonance ionization technology, (2) Laser-induced rare isotope detection technology, (3) Laser-induced plasma analysis technology, (4) Microparticle analysis technology by using ion trap, (5) Laser induced remote sensing technique. As a result a monitoring system for photoionized product is developed and the test of system is performed with Sm sample. The rare isotope detection system is designed and a few key elements of the system are developed. In addition a laser-induced plasma analysis system is developed and samples such as Zircaloy, Zinc-base alloy, rock samples are reasonably analyzed. The detection sensitivity is identified as good as a few ppm order. An ion trap is developed and microparticles such as SiC are trapped inside the trap by ac and dc fields. The fluorescence signals from the organic dyes as well as rare earth element which are absorbed on the microparticles are detected. Several calibration curves are also obtained. In the field of laser remote sensing a mobile Lidar system is designed and several key elements are developed. In addition the developed system is used for the detection of Ozone, NO{sub 2}, SO{sub 2}, etc. (author). 57 refs., 42 figs.

  2. Involving users in the development of embedded technology in construction

    DEFF Research Database (Denmark)

    Storgaard, Kresten; Buch-Hansen, Thomas Cornelius; Ærenlund, Lærke

    2011-01-01

    Based on a project about user driven innovation and embedded technology in construction (BIIB), the paper discusses methodological issues on user involvement. In the paper especially focus is on the experiences on involving users in collaborative development of scenarios, in the validation...... of scenarios and in developing innovative solutions on a conceptual level. The project discusses 1) concepts of users and 2) methods for collaborative involvement. The first discussion involves presentation of an extended user concept and a discussion of differences between lead users and need-advanced users....... The second discussion on collaborative involvement, discuss experiences with methods for communication across cultural and professional competences with reference to boundary objects, tangible systems and visualization. In the project four segments of situations for use of embedded technology in construction...

  3. Contributions to the Development of a General Methodology for Innovation and Forecasting

    Directory of Open Access Journals (Sweden)

    Gabriela IONESCU

    2011-12-01

    Full Text Available The paper presents authors’ contributions to the achievement of a first variant of the innovation and forecasting methodology. The various tools of TRIZ methodology (laws of systems development set for technical systems, the matrix of contradictions, the 40 inventive principles, the 39 parameters, Su-Field analysis, the method of the 9 screens etc are already available, or can be customised to the specific type of the organization system. The TRIZ methodology for economics was embedded in a more general methodology for innovation and forecasting. The eight laws of evolution systems were customised to economics. The authors also make a comparative analysis of the technical TRIZ matrix to the company management matrix. Based on the analysis performed, it can be concluded that a general methodology can be prepared for innovation and forecasting, making use of TRIZ methodology, by customising some classical instruments of the technical field, and bringing in other specific economic tools.

  4. Developing an Item Bank for Use in Testing in Africa: Theory and Methodology

    Science.gov (United States)

    Furtuna, Daniela

    2014-01-01

    The author describes the steps taken by a research team, of which she was part, to develop a specific methodology for assessing student attainment in primary school, working with the Programme for the Analysis of Education Systems (PASEC) of the Conference of Ministers of Education of French-speaking Countries (CONFEMEN). This methodology provides…

  5. A PROPOSED MODEL OF AGILE METHODOLOGY IN SOFTWARE DEVELOPMENT

    OpenAIRE

    Anjali Sharma*, Karambir

    2016-01-01

    Agile Software development has been increasing popularity and replacing the traditional methods of software develop-ment. This paper presents the all neural network techniques including General Regression Neural Networks (GRNN), Prob-abilistic Neural Network (PNN), GMDH Polynomial Neural Network, Cascade correlation neural network and a Machine Learning Technique Random Forest. To achieve better prediction, effort estimation of agile projects we will use Random Forest with Story Points Approa...

  6. Cryogenic Fluid Management Technology Development Roadmaps

    Science.gov (United States)

    Stephens, J. R.; Johnson, W. L.

    2017-01-01

    Advancement in Cryogenic Fluid Management (CFM) Technologies is essential for achieving NASA's future long duration missions. Propulsion systems utilizing cryogens are necessary to achieve mission success. Current State Of the Art (SOA) CFM technologies enable cryogenic propellants to be stored for several hours. However, some envisioned mission architectures require cryogens to be stored for two years or longer. The fundamental roles of CFM technologies are long term storage of cryogens, propellant tank pressure control and propellant delivery. In the presence of heat, the cryogens will "boil-off" over time resulting in excessive pressure buildup, off-nominal propellant conditions, and propellant loss. To achieve long term storage and tank pressure control, the CFM elements will intercept and/or remove any heat from the propulsion system. All functions are required to perform both with and without the presence of a gravitational field. Which CFM technologies are required is a function of the cryogens used, mission architecture, vehicle design and propellant tank size. To enable NASA's crewed mission to the Martian surface, a total of seventeen CFM technologies have been identified to support an In-Space Stage and a Lander/Ascent Vehicle. Recognizing that FY2020 includes a Decision Point regarding the In-Space Stage Architecture, a set of CFM Technology Development Roadmaps have been created identifying the current Technology Readiness Level (TRL) of each element, current technology "gaps", and existing technology development efforts. The roadmaps include a methodical approach and schedule to achieve a flight demonstration in FY2023, hence maturing CFM technologies to TRL 7 for infusion into the In-Space Stage Preliminary Design.

  7. HUMID AIR TURBINE CYCLE TECHNOLOGY DEVELOPMENT PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Richard Tuthill

    2002-07-18

    The Humid Air Turbine (HAT) Cycle Technology Development Program focused on obtaining HAT cycle combustor technology that will be the foundation of future products. The work carried out under the auspices of the HAT Program built on the extensive low emissions stationary gas turbine work performed in the past by Pratt & Whitney (P&W). This Program is an integral part of technology base development within the Advanced Turbine Systems Program at the Department of Energy (DOE) and its experiments stretched over 5 years. The goal of the project was to fill in technological data gaps in the development of the HAT cycle and identify a combustor configuration that would efficiently burn high moisture, high-pressure gaseous fuels with low emissions. The major emphasis will be on the development of kinetic data, computer modeling, and evaluations of combustor configurations. The Program commenced during the 4th Quarter of 1996 and closed in the 4th Quarter of 2001. It teamed the National Energy Technology Laboratory (NETL) with P&W, the United Technologies Research Center (UTRC), and a subcontractor on-site at UTRC, kraftWork Systems Inc. The execution of the program started with bench-top experiments that were conducted at UTRC for extending kinetic mechanisms to HAT cycle temperature, pressure, and moisture conditions. The fundamental data generated in the bench-top experiments was incorporated into the analytical tools available at P&W to design the fuel injectors and combustors. The NETL then used the hardware to conduct combustion rig experiments to evaluate the performance of the combustion systems at elevated pressure and temperature conditions representative of the HAT cycle. The results were integrated into systems analysis done by kraftWork to verify that sufficient understanding of the technology had been achieved and that large-scale technological application and demonstration could be undertaken as follow-on activity. An optional program extended the

  8. A Comparative Analysis of Two Software Development Methodologies: Rational Unified Process and Extreme Programming

    Directory of Open Access Journals (Sweden)

    Marcelo Rafael Borth

    2014-01-01

    Full Text Available Software development methodologies were created to meet the great market demand for innovation, productivity, quality and performance. With the use of a methodology, it is possible to reduce the cost, the risk, the development time, and even increase the quality of the final product. This article compares two of these development methodologies: the Rational Unified Process and the Extreme Programming. The comparison shows the main differences and similarities between the two approaches, and highlights and comments some of their predominant features.

  9. Advances in Robotic Servicing Technology Development

    Science.gov (United States)

    Gefke, Gardell G.; Janas, Alex; Pellegrino, Joseph; Sammons, Matthew; Reed, Benjamin

    2015-01-01

    NASA's Satellite Servicing Capabilities Office (SSCO) has matured robotic and automation technologies applicable to in-space robotic servicing and robotic exploration over the last six years. This paper presents the progress of technology development activities at the Goddard Space Flight Center Servicing Technology Center and on the ISS, with an emphasis on those occurring in the past year. Highlighted advancements are design reference mission analysis for servicing in low Earth orbit (LEO) and asteroid redirection; delivery of the engineering development unit of the NASA Servicing Arm; an update on International Space Station Robotic Refueling Mission; and status of a comprehensive ground-based space robot technology demonstration expanding in-space robotic servicing capabilities beginning fall 2015.

  10. Mobile display technologies: Past developments, present technologies, and future opportunities

    Science.gov (United States)

    Ohshima, Hiroyuki

    2014-01-01

    It has been thirty years since the first active matrix (AM) flat panel display (FPD) was industrialized for portable televisions (TVs) in 1984. The AM FPD has become a dominant electronic display technology widely used from mobile displays to large TVs. The development of AM FPDs for mobile displays has significantly changed our lives by enabling new applications, such as notebook personal computers (PCs), smartphones and tablet PCs. In the future, the role of mobile displays will become even more important, since mobile displays are the live interface for the world of mobile communications in the era of ubiquitous networks. Various developments are being conducted to improve visual performance, reduce power consumption and add new functionality. At the same time, innovative display concepts and novel manufacturing technologies are being investigated to create new values.

  11. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-01-20

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/Biological Extraction; (4) Modeling and Control; and (5) Environmental Control.

  12. Technology developments applied to healthcare/nursing.

    Science.gov (United States)

    Øyri, Karl; Newbold, Susan; Park, Hyeoun-Ae; Honey, Michelle; Coenen, Amy; Ensio, Anneli; Jesus, Elvio

    2007-01-01

    Future technology developments as applied to healthcare and particularly nursing were discussed. Emerging technologies such as genetics, small unobtrusive monitoring devices, use of information and communication technologies are as tools to not only facilitate but also promote communication among all parties of the healthcare process. These emerging technologies can be used for ubiquitous healthcare (u-health). The role of nursing in the u-health is fundamental and required for success and growth. Nursing's role will evolve as nurses become 'information-mediators' in a broader-sense than current role. All technologies will ultimately focus on the consumer through 'behind-the-scenes' data collection, which in turn will also allow nurses to analyze these data to improve care. We need to acknowledge an increased presence and or pervasiveness of information technologies as key components of quality healthcare. This sort of acknowledgment will help propel nursing, and healthcare, to increase use of these tools. To develop nurses with these types of skills the nursing education process will require a fundamental change to integrate these technology-sorts of tools as necessary elements for success.

  13. Heavy Oil Development Technology of Liaohe Oilfield

    Institute of Scientific and Technical Information of China (English)

    Han Yun

    2007-01-01

    @@ Liaohe Oilfield, the largest heavy oil production base in China, features in various reservoir types, deep burial, and wide range of crude oil viscosity. For many years, a series of technologies have been developed for different oil products and reservoir types of the oilfield, of which water flooding, foam slug drive, steam stimulation, steam drive,and SAGD are the main technologies. After continuous improvement, they have been further developed and played an important role in the development of heavy oil in the oilfield.

  14. The Development of the Foundations of Modern Pedagogy: Paradigmal and Methodological Aspects of Research

    Directory of Open Access Journals (Sweden)

    ТamaraА. Dmitrenko

    2015-06-01

    Full Text Available Changes in the various fields of knowledge influenced the pedagogical science. The article explains the structure of the foundations of modern pedagogy through paradigmal and methodological aspects. Bases of modern pedagogy include complex of paradigms, object and subject of science, general and specific principles, methods and technologies. Paradigmal analysis of bases of modern pedagogy showed that paradigms performed informational, instrumental and technological functions through connections with factors, approaches and principles accordingly.The research of methodological aspect of bases of modern pedagogics allowed to define the structure of the methodological system and main characteristics of the pedagogical system. In the article considers specific principles of optimality, optimization, adaptation and rules of their use in a pedagogical theory and practice.

  15. A methodology aimed at fostering and sustaining the development processes of an IE-based industry

    Science.gov (United States)

    Corallo, Angelo; Errico, Fabrizio; de Maggio, Marco; Giangreco, Enza

    In the current competitive scenario, where business relationships are fundamental in building successful business models and inter/intra organizational business processes are progressively digitalized, an end-to-end methodology is required that is capable of guiding business networks through the Internetworked Enterprise (IE) paradigm: a new and innovative organizational model able to leverage Internet technologies to perform real-time coordination of intra and inter-firm activities, to create value by offering innovative and personalized products/services and reduce transaction costs. This chapter presents the TEKNE project Methodology of change that guides business networks, by means of a modular and flexible approach, towards the IE techno-organizational paradigm, taking into account the competitive environment of the network and how this environment influences its strategic, organizational and technological levels. Contingency, the business model, enterprise architecture and performance metrics are the key concepts that form the cornerstone of this methodological framework.

  16. Developing a Design Methodology for Web 2.0 Mediated Learning

    DEFF Research Database (Denmark)

    2010-01-01

    Ed). We describe how this method has been adopted as part of a learning methodology building on concepts and models presented in the other symposium papers, in particular those of active, problem based learning and web 2.0-technologies. The challenge of designing on the basis of an explicit learning...

  17. Advanced software development workstation: Object-oriented methodologies and applications for flight planning and mission operations

    Science.gov (United States)

    Izygon, Michel

    1993-01-01

    The work accomplished during the past nine months in order to help three different organizations involved in Flight Planning and in Mission Operations systems, to transition to Object-Oriented Technology, by adopting one of the currently most widely used Object-Oriented analysis and Design Methodology is summarized.

  18. Development of a Methodology for Assessing Military Team Processes

    OpenAIRE

    Fraser, Brent DeWayne

    2003-01-01

    This study is based upon the premise that overall team performance is the sum of the team's performance in several individual team processes. The purpose of this study was to develop a tool to measure performance in each of these individual team processes. This study begins the measurement development cycle by developing a tool that uses direct observation to collect data on team processes. The tool was then tested in a battle simulation being used as a C2 training exercise. The study showed ...

  19. Development of methodology for horizontal axis wind turbine dynamic analysis

    Science.gov (United States)

    Dugundji, J.

    1982-01-01

    Horizontal axis wind turbine dynamics were studied. The following findings are summarized: (1) review of the MOSTAS computer programs for dynamic analysis of horizontal axis wind turbines; (2) review of various analysis methods for rotating systems with periodic coefficients; (3) review of structural dynamics analysis tools for large wind turbine; (4) experiments for yaw characteristics of a rotating rotor; (5) development of a finite element model for rotors; (6) development of simple models for aeroelastics; and (7) development of simple models for stability and response of wind turbines on flexible towers.

  20. Transaction Costs, Information Technology and Development

    OpenAIRE

    Singh, Nirvikar

    2004-01-01

    This paper explores potential channels through which information technology (IT) affects economic development. The channel emphasized here is the reduction of transaction costs through the use of information technology. We discuss the nature of transaction costs, their possible impacts on economic outcomes, and the impacts of IT on transaction costs. We provide a theoretical discussion of how a reduction in transaction costs may affect the number of intermediate goods that are produced, and i...

  1. A methodology for estimating health benefits of electricity generation using renewable technologies.

    Science.gov (United States)

    Partridge, Ian; Gamkhar, Shama

    2012-02-01

    At Copenhagen, the developed countries agreed to provide up to $100 bn per year to finance climate change mitigation and adaptation by developing countries. Projects aimed at cutting greenhouse gas (GHG) emissions will need to be evaluated against dual criteria: from the viewpoint of the developed countries they must cut emissions of GHGs at reasonable cost, while host countries will assess their contribution to development, or simply their overall economic benefits. Co-benefits of some types of project will also be of interest to host countries: for example some projects will contribute to reducing air pollution, thus improving the health of the local population. This paper uses a simple damage function methodology to quantify some of the health co-benefits of replacing coal-fired generation with wind or small hydro in China. We estimate the monetary value of these co-benefits and find that it is probably small compared to the added costs. We have not made a full cost-benefit analysis of renewable energy in China as some likely co-benefits are omitted from our calculations. Our results are subject to considerable uncertainty however, after careful consideration of their likely accuracy and comparisons with other studies, we believe that they provide a good first cut estimate of co-benefits and are sufficiently robust to stand as a guide for policy makers. In addition to these empirical results, a key contribution made by the paper is to demonstrate a simple and reasonably accurate methodology for health benefits estimation that applies the most recent academic research in the field to the solution of an increasingly important problem. Copyright © 2011 Elsevier Ltd. All rights reserved.

  2. Development of Fuzzy Logic and Soft Computing Methodologies

    Science.gov (United States)

    Zadeh, L. A.; Yager, R.

    1999-01-01

    Our earlier research on computing with words (CW) has led to a new direction in fuzzy logic which points to a major enlargement of the role of natural languages in information processing, decision analysis and control. This direction is based on the methodology of computing with words and embodies a new theory which is referred to as the computational theory of perceptions (CTP). An important feature of this theory is that it can be added to any existing theory - especially to probability theory, decision analysis, and control - and enhance the ability of the theory to deal with real-world problems in which the decision-relevant information is a mixture of measurements and perceptions. The new direction is centered on an old concept - the concept of a perception - a concept which plays a central role in human cognition. The ability to reason with perceptions perceptions of time, distance, force, direction, shape, intent, likelihood, truth and other attributes of physical and mental objects - underlies the remarkable human capability to perform a wide variety of physical and mental tasks without any measurements and any computations. Everyday examples of such tasks are parking a car, driving in city traffic, cooking a meal, playing golf and summarizing a story. Perceptions are intrinsically imprecise. Imprecision of perceptions reflects the finite ability of sensory organs and ultimately, the brain, to resolve detail and store information. More concretely, perceptions are both fuzzy and granular, or, for short, f-granular. Perceptions are f-granular in the sense that: (a) the boundaries of perceived classes are not sharply defined; and (b) the elements of classes are grouped into granules, with a granule being a clump of elements drawn together by indistinguishability, similarity. proximity or functionality. F-granularity of perceptions may be viewed as a human way of achieving data compression. In large measure, scientific progress has been, and continues to be

  3. Establishing a methodology to develop complex sociotechnical systems

    CSIR Research Space (South Africa)

    Oosthuizen, R

    2013-02-01

    Full Text Available Many modern management systems, such as military command and control, tend to be large and highly interconnected sociotechnical systems operating in a complex environment. Successful development, assessment and implementation of these systems...

  4. AFCI Safeguards Enhancement Study: Technology Development Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Leon E.; Dougan, A.; Tobin, Stephen; Cipiti, B.; Ehinger, Michael H.; Bakel, A. J.; Bean, Robert; Grate, Jay W.; Santi, P.; Bryan, Steven; Kinlaw, M. T.; Schwantes, Jon M.; Burr, Tom; Lehn, Scott A.; Tolk, K.; Chichester, David; Menlove, H.; Vo, D.; Duckworth, Douglas C.; Merkle, P.; Wang, T. F.; Duran, F.; Nakae, L.; Warren, Glen A.; Friedrich, S.; Rabin, M.

    2008-12-31

    The Advanced Fuel Cycle Initiative (AFCI) Safeguards Campaign aims to develop safeguards technologies and processes that will significantly reduce the risk of proliferation in the U.S. nuclear fuel cycle of tomorrow. The Safeguards Enhancement Study was chartered with identifying promising research and development (R&D) directions over timescales both near-term and long-term, and under safeguards oversight both domestic and international. This technology development roadmap documents recognized gaps and needs in the safeguarding of nuclear fuel cycles, and outlines corresponding performance targets for each of those needs. Drawing on the collective expertise of technologists and user-representatives, a list of over 30 technologies that have the potential to meet those needs was developed, along with brief summaries of each candidate technology. Each summary describes the potential impact of that technology, key research questions to be addressed, and prospective development milestones that could lead to a definitive viability or performance assessment. Important programmatic linkages between U.S. agencies and offices are also described, reflecting the emergence of several safeguards R&D programs in the U.S. and the reinvigoration of nuclear fuel cycles across the globe.

  5. Development of technologies for utilizing geothermal energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    In verifying the effectiveness of the deep geothermal resource exploration technology, development is being carried out on a fracture-type reservoir exploration method. The seismic exploration method investigates detailed structures of underground fracture systems by using seismic waves generated on the ground surface. Verification experiments for fiscal 1994 were carried out by selecting the Kakkonda area in which small fracture networks form reservoir beds. Geothermal resources in deep sections (deeper than 2000 m with temperatures higher than 350{degree}C) are promising in terms of amount of the resources, but anticipated with difficulty in exploration and impediments in drilling. To avoid these risks, studies are being progressed on the availability of resources in deep sections, their utilization possibility, and technologies of effective exploration and drilling. This paper summarizes the results of deep resource investigations during fiscal 1994. It also describes such technological development as hot water utilizing power generation. Development is performed on a binary cycle power generation plant which pumps and utilizes hot water of 150 to 200{degree}C by using a downhole pump. The paper also reports development on element technologies for hot rock power generation systems. It also dwells on development of safe and effective drilling and production technologies for deep geothermal resources.

  6. Proposal for product development model focused on ce certification methodology

    Directory of Open Access Journals (Sweden)

    Nathalia Marcia Goulart Pinheiro

    2015-09-01

    Full Text Available This paper presents a critical analysis comparing 21 product development models in order to identify whether these structures meet the demands Product Certification of the European Community (CE. Furthermore, it presents a product development model, comprising the steps in the models analyzed, including improvements in activities for referred product certification. The proposed improvements are justified by the growing quest for the internationalization of products and processes within companies.

  7. Organizational Culture and Scale Development: Methodological Challenges and Future Directions

    OpenAIRE

    Bavik Ali; Duncan Tara

    2014-01-01

    Defining and measuring organizational culture (OC) is of paramount importance to organizations because a strong culture could potentially increase service quality and yield sustainable competitive advantages. However, such process could be challenging to managers because the scope of OC has been defined differently across disciplines and industries, which has led to the development of various scales for measuring OC. In addition, previously developed OC scales may also not be fully applicable...

  8. Learning challenges and sustainable development: A methodological perspective.

    Science.gov (United States)

    Seppänen, Laura

    2017-01-01

    Sustainable development requires learning, but the contents of learning are often complex and ambiguous. This requires new integrated approaches from research. It is argued that investigation of people's learning challenges in every-day work is beneficial for research on sustainable development. The aim of the paper is to describe a research method for examining learning challenges in promoting sustainable development. This method is illustrated with a case example from organic vegetable farming in Finland. The method, based on Activity Theory, combines historical analysis with qualitative analysis of need expressions in discourse data. The method linking local and subjective need expressions with general historical analysis is a promising way to overcome the gap between the individual and society, so much needed in research for sustainable development. Dialectically informed historical frameworks have practical value as tools in collaborative negotiations and participatory designs for sustainable development. The simultaneous use of systemic and subjective perspectives allows researchers to manage the complexity of practical work activities and to avoid too simplistic presumptions about sustainable development.

  9. The Health Behaviour in School-aged Children (HBSC) study: methodological developments and current tensions

    DEFF Research Database (Denmark)

    Roberts, C; Freeman, J; Samdal, O

    2009-01-01

    OBJECTIVES: To describe the methodological development of the HBSC survey since its inception and explore methodological tensions that need to be addressed in the ongoing work on this and other large-scale cross-national surveys. METHODS: Using archival data and conversations with members of the ...... in working through such challenges renders it likely that HBSC can provide a model of other similar studies facing these tensions.......OBJECTIVES: To describe the methodological development of the HBSC survey since its inception and explore methodological tensions that need to be addressed in the ongoing work on this and other large-scale cross-national surveys. METHODS: Using archival data and conversations with members...... of the network, we collaboratively analysed our joint understandings of the survey's methodology. RESULTS: We identified four tensions that are likely to be present in upcoming survey cycles: (1) maintaining quality standards against a background of rapid growth, (2) continuous improvement with limited financial...

  10. Opportunities for renewable energy technologies in water supply in developing country villages

    Energy Technology Data Exchange (ETDEWEB)

    Niewoehner, J.; Larson, R.; Azrag, E.; Hailu, T.; Horner, J.; VanArsdale, P. [Water for People, Denver, CO (United States)

    1997-03-01

    This report provides the National Renewable Energy Laboratory (NREL) with information on village water supply programs in developing countries. The information is intended to help NREL develop renewable energy technologies for water supply and treatment that can be implemented, operated, and maintained by villagers. The report is also useful to manufacturers and suppliers in the renewable energy community in that it describes a methodology for introducing technologies to rural villages in developing countries.

  11. Developing knowledge intensive ideas in engineering education: the application of camp methodology

    Science.gov (United States)

    Heidemann Lassen, Astrid; Løwe Nielsen, Suna

    2011-11-01

    Background: Globalization, technological advancement, environmental problems, etc. challenge organizations not just to consider cost-effectiveness, but also to develop new ideas in order to build competitive advantages. Hence, methods to deliberately enhance creativity and facilitate its processes of development must also play a central role in engineering education. However, so far the engineering education literature provides little attention to the important discussion of how to develop knowledge intensive ideas based on creativity methods and concepts. Purpose: The purpose of this article is to investigate how to design creative camps from which knowledge intensive ideas can unfold. Design/method/sample: A framework on integration of creativity and knowledge intensity is first developed, and then tested through the planning, execution and evaluation of a specialized creativity camp with focus on supply chain management. Detailed documentation of the learning processes of the participating 49 engineering and business students is developed through repeated interviews during the process as well as a survey. Results: The research illustrates the process of development of ideas, and how the participants through interdisciplinary collaboration, cognitive flexibility and joint ownership develop highly innovative and knowledge-intensive ideas, with direct relevance for the four companies whose problems they address. Conclusions: The article demonstrates how the creativity camp methodology holds the potential of combining advanced academic knowledge and creativity, to produce knowledge intensive ideas, when the design is based on ideas of experiential learning as well as creativity principles. This makes the method a highly relevant learning approach for engineering students in the search for skills to both develop and implement innovative ideas.

  12. Reducing Emissions from Deforestation in Developing Countries. A workshop to discuss methodological and policy issues

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-05-15

    COP-11 initiated a 2-year process to consider approaches to stimulate action for reducing emissions from deforestation in developing countries. As a first step, the COP invited Parties and accredited observers to submit, by 31 March 2006, their views 'on issues relating to reducing emissions from deforestation in developing countries, focusing on relevant scientific, technical and methodological issues, and the exchange of relevant information and experiences, including policy approaches and positive incentives'. SBSTA (Subsidiary Body for Scientific and Technological Advice) is expected to consider these submissions at SBSTA 24 in May 15-26, 2006 in Bonn, Germany, and subsequently hold a workshop on this issue later in 2006. The objective of this workshop is to provide a timely forum for an informal discussion and assessment of methodological and policy approaches for reducing emissions from deforestation. The workshop will base its discussions on the published literature, the 31 March submissions by governments and observer organizations, and inputs by workshop participants. The timing of the workshop has been selected to precede and provide input into the dialogue at SBSTA 24 and SBSTA workshop in late 2006. The workshop will encourage the learning and awareness of the issue and analyse the possible paths that negotiations may take in the future. The workshop organizers encourage participants to think 'outside the box' and will adopt the Chatham House Rule for the discussions on the first day and the Break Out Groups. Next to the Final Programme and Workshop Summaries several pdf-files of the presentations are available.

  13. Developing a framework for sustainable manufacturing of technologies in Africa focusing on Ghana

    OpenAIRE

    Donani, Yao-Martin

    2014-01-01

    This thesis is concerned with developing a framework for the sustainable manufacturing of technologies in Sub-Saharan Africa, focusing on Ghana, for local industry. The interest here is on manufacturing and production technologies. Drawing on the work of Clemens and Dalrymple (2005), a three step approach emerged as an overarching methodology leading to the construction of the Ghana manufacturing of technology model (GMTM). The work of Sagasti (1992) provided the framework for its constru...

  14. The methodological bases of comparative evaluation of sci¬entific and technological potential of Russia and the EU: regional and international aspects

    Directory of Open Access Journals (Sweden)

    Voloshenko Ksenya

    2012-01-01

    Full Text Available This article analyses approaches to the definition of such categories as “scientific and technological potential” and “innovative potential” in view of their resource, structural, procedural and resultant components. The author gives a more accurate definition of the scientific and technological potential through identifying its resources and orientation towards transforming abilities. On the basis of the existing methods of comparative analysis used in Russia and abroad, the author proposes a methodology for evaluating scientific and technological potential in the context of regional and international comparison. The integral index is calculated on the basis of a customised information and statistical database of normalised indicators through the identification and convolution of subindices that characterise individual components of potential. These subindices include pecific indicators applied in different statistical systems, in particular, those used in Russia and the EU, which made it possible to compar the data. The article presents the result of the application of this methodology based on a comparative evaluation of the scientific and technological potential of Russia (Northwestern federal district and EU states of the Baltic region. The experimental check suggests that the methodology be further improved for future clustering of Russian and EU regions according to the level of their innovative development.

  15. Development of mechanical design technology for integral reactor

    Energy Technology Data Exchange (ETDEWEB)

    Park, Keun Bae; Choi, Suhn; Kim, Kang Soo; Kim, Tae Wan; Jeong, Kyeong Hoon; Lee, Gyu Mahn

    1999-03-01

    While Korean nuclear reactor strategy seems to remain focused on the large capacity power generation, it is expected that demand of small and medium size reactor will arise for multi-purpose application such as small capacity power generation, co-generation and sea water desalination. With this in mind, an integral reactor SMART is under development. Design concepts, system layout and types of equipment of integral reactor are significantly different from those of loop type reactor. Conceptual design development of mechanical structures of integral reactor SMART is completed through the first stage of the project. Efforts were endeavored for the establishment of design basis and evaluation of applicable codes and standards. Design and functional requirements of major structural components were setup, and three dimensional structural modelling of SMART reactor vessel assembly was prepared. Also, maintenance and repair scheme as well as preliminary fabricability evaluation were carried out. Since small integral reactor technology includes sensitive technologies and know-how's, it is hard to achieve systematic and comprehensive technology transfer from nuclear-advanced countries. Thus, it is necessary to develop the related design technology and to verify the adopted methodologies through test and experiments in order to assure the structural integrity of reactor system. (author)

  16. A Methodology for Assessing the Military Benefits of Science and Technology Investments

    Science.gov (United States)

    2008-09-01

    ratio (BCR) greater than 2 to 1. In the area of biology, intrinsic chemical markers (ICMs) provide a means for verifying that food is fully...1.7 million per year. Since the current wastage due to less than optimal quality is about 20%, the savings due to avoiding wastage is about $2.2...3) focusing commercial capabilities on Army needs, such as food preparation, packaging, and preservation technologies that enabled the development

  17. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher Hull

    2009-10-31

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium -- Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno - that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/biological extraction; (4) Modeling and control; and (5) Environmental control. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed by category, along with brief abstracts of their aims and objectives.

  18. Improved methodology for developing cost uncertainty models for naval vessels

    OpenAIRE

    Brown, Cinda L.

    2008-01-01

    The purpose of this thesis is to analyze the probabilistic cost model currently in use by NAVSEA 05C to predict cost uncertainty in naval vessel construction and to develop a method that better predicts the ultimate cost risk. The data used to develop the improved approach is collected from analysis of the CG(X) class ship by NAVSEA 05C. The NAVSEA 05C cost risk factors are reviewed and analyzed to determine if different factors are better cost predictors. The impact of data elicitation, t...

  19. Development of level 2 PSA technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong Ha; Park, Soo Yong; Kim, See Darl; Song, Yong Mann; Ahn, Kwang Il; Park, Jae Wu; Jin, Young Ho

    1997-07-01

    The objective of this project is the development of the computer code system for level 2 probabilistic safety assessment (PSA) of nuclear power plants. The scope of the project can be divided into three areas. The first area is to develop the computer code (CONPAS) which can quantify the accident progression event trees. CONPAS beta version has been developed this year and it is comprised of four modules : (1) EDITOR for generating the event tree logic diagrams and (2) COMPUTER for event tree quantification and for additional use of the calculated results. (3) TEXT EDITOR and (4) CODE PLOTTER. Comparing with the existing computer code, the present code provides a flexible code reusability and user interface, convenient edition of logic diagram, data operation, and systematic quantification of the results. The methodology development of containment structural analysis is the second area. The specific tasks included the collection and analysis of the containment failure modes for the various containment types, and the methodology establishment for the containment structure analysis. Over twenty large dry PWR containments, the database for containment failure mode and pressure has been constructed and the simplified fragility model has been proposed to calculate the containment failure probability. They will be used as an important input not only in the containment analysis but also in the source term analysis. For the last, source term analyzing methodology and its applied computer code that is named as `KORSOR` are developed. KORSOR which used parametric model approach combined modules which consist of accident sequence input module via user`s logic rule, random sample generating module, parametric database module, and source term uncertainty quantification module. The characteristics of parametric data which use din the source term analyzing model is analyzed and the constructing idea and example for the parametric database is suggested. (author). 67 refs., 66 tabs

  20. Proposal of a flowchart for the development process of Assistive Technology products

    Directory of Open Access Journals (Sweden)

    Fernanda do Nascimento Maia

    2014-12-01

    Full Text Available In exploratory interviews and unsystematic observations with professionals working in the field of rehabilitation of persons with disabilities, we observed that there is a lack of systematic development in the process of assistive technology resources, resulting in products with low quality of usability. The main objective of the present study was to contribute, through a methodological proposal, to the formation of occupational therapists in the process of developing objects for persons with disabilities. The methodology used was a brief review of the steps taken in this research. The survey was conducted and recorded relying on the following steps: literature review; organization of the research project; presentation of data from field research conducted with occupational therapists who produce objects of assistive technology; assessment and interview with users; application of questionnaires to teachers of assistive technology disciplines; interviews with occupational therapists who perform making assistive technology products to other professionals; proposal of a flowchart for the development of assistive technology resources.