WorldWideScience

Sample records for technology design process

  1. A Design Process for Creative Technology

    NARCIS (Netherlands)

    Mader, Angelika H.; Eggink, Wouter; Bohemia, E.; Eger, A.; Eggink, W.; Kovacevic, A.; Parkinson, B; Wits, W.

    Creative Technology is a new bachelor programme at the University of Twente. Goal of Creative Technology is to design products and applications that improve the quality of daily life in its manifold aspects, building on Information and Communication Technology (ICT). The application domains range

  2. Educational Design and Construction: Processes and Technologies

    NARCIS (Netherlands)

    McKenney, Susan; Reeves, Thomas C.; Gros, Begona; Kinshuk,; Maina, Marcelo

    2015-01-01

    There are no one-size-fits-all steps for tackling different design challenges within the context of education. There are, however, processes and activities that are often useful. Developing a repertoire so that designers can select and use the most fruitful and fitting approaches for specific

  3. Design and optimization of sustainable process technologies

    DEFF Research Database (Denmark)

    Mussatto, Solange I.; Qin, Fen; Yamakawa, Celina Kiyomi

    The development of sustainable processes and innovative strategies that can accelerate the transition to a bio-economyis one of the main goals of the current societyin order to have a future less dependent on oil and with lower carbon emissions. The use of biomass as a feedstock for bioprocesses......, minimizing the costs and maximizing the efficiencyand productivity.Once the optimal conditions are identified, the process scale-up can be then evaluated. This could be translated in a faster time to market for newprocess technologies....

  4. Technological design as an evolutionary process

    NARCIS (Netherlands)

    Brey, Philip A.E.; Kroes, Peter; Vermaas, Pieter E.; Light, Andrew; Moore, Steven A.

    2008-01-01

    The evolution of technical artifacts is often seen as radically different from the evolution of biological species. Technical artifacts are normally understood to result from the purposive intelligence of designers whereas biological species and organisms are held to have resulted from evolution by

  5. Reactor and process design in sustainable energy technology

    CERN Document Server

    Shi, Fan

    2014-01-01

    Reactor Process Design in Sustainable Energy Technology compiles and explains current developments in reactor and process design in sustainable energy technologies, including optimization and scale-up methodologies and numerical methods. Sustainable energy technologies that require more efficient means of converting and utilizing energy can help provide for burgeoning global energy demand while reducing anthropogenic carbon dioxide emissions associated with energy production. The book, contributed by an international team of academic and industry experts in the field, brings numerous reactor design cases to readers based on their valuable experience from lab R&D scale to industry levels. It is the first to emphasize reactor engineering in sustainable energy technology discussing design. It provides comprehensive tools and information to help engineers and energy professionals learn, design, and specify chemical reactors and processes confidently. Emphasis on reactor engineering in sustainable energy techn...

  6. Hybrid microcircuit technology handbook materials, processes, design, testing and production

    CERN Document Server

    Licari, James J

    1998-01-01

    The Hybrid Microcircuit Technology Handbook integrates the many diverse technologies used in the design, fabrication, assembly, and testing of hybrid segments crucial to the success of producing reliable circuits in high yields. Among these are: resistor trimming, wire bonding, die attachment, cleaning, hermetic sealing, and moisture analysis. In addition to thin films, thick films, and assembly processes, important chapters on substrate selections, handling (including electrostatic discharge), failure analysis, and documentation are included. A comprehensive chapter of design guidelines will

  7. Staging Co-design Processes for Self-care Technologies

    DEFF Research Database (Denmark)

    Brodersen, Søsser Grith Kragh; Lindegaard, Hanne

    2016-01-01

    field studies in people’s homes and discuss how to stage design processes with the people who are actually going to use the self-care technologies—not only end-users, but also many other actors, such as relatives, caregivers, and municipality and company staff. Specifically, we describe how challenges......Many new healthcare technologies are currently being implemented in people’s homes in order to facilitate self-care. Socially innovative design is challenging, since it requires an intimate understanding of people’s abilities and daily practices. In this article, we highlight the need to perform...

  8. Virtual Welded - Joint Design Integrating Advanced Materials and Processing Technology

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Zhishang; Ludewig, Howard W.; Babu, S. Suresh

    2005-06-30

    Virtual Welede-Joint Design, a systematic modeling approach, has been developed in this project to predict the relationship of welding process, microstructure, properties, residual stress, and the ultimate weld fatique strength. This systematic modeling approach was applied in the welding of high strength steel. A special welding wire was developed in this project to introduce compressive residual stress at weld toe. The results from both modeling and experiments demonstrated that more than 10x fatique life improvement can be acheived in high strength steel welds by the combination of compressive residual stress from the special welding wire and the desired weld bead shape from a unique welding process. The results indicate a technology breakthrough in the design of lightweight and high fatique performance welded structures using high strength steels.

  9. Lignocellulosic ethanol: Technology design and its impact on process efficiency.

    Science.gov (United States)

    Paulova, Leona; Patakova, Petra; Branska, Barbora; Rychtera, Mojmir; Melzoch, Karel

    2015-11-01

    This review provides current information on the production of ethanol from lignocellulosic biomass, with the main focus on relationships between process design and efficiency, expressed as ethanol concentration, yield and productivity. In spite of unquestionable advantages of lignocellulosic biomass as a feedstock for ethanol production (availability, price, non-competitiveness with food, waste material), many technological bottlenecks hinder its wide industrial application and competitiveness with 1st generation ethanol production. Among the main technological challenges are the recalcitrant structure of the material, and thus the need for extensive pretreatment (usually physico-chemical followed by enzymatic hydrolysis) to yield fermentable sugars, and a relatively low concentration of monosaccharides in the medium that hinder the achievement of ethanol concentrations comparable with those obtained using 1st generation feedstocks (e.g. corn or molasses). The presence of both pentose and hexose sugars in the fermentation broth, the price of cellulolytic enzymes, and the presence of toxic compounds that can inhibit cellulolytic enzymes and microbial producers of ethanol are major issues. In this review, different process configurations of the main technological steps (enzymatic hydrolysis, fermentation of hexose/and or pentose sugars) are discussed and their efficiencies are compared. The main features, benefits and drawbacks of simultaneous saccharification and fermentation (SSF), simultaneous saccharification and fermentation with delayed inoculation (dSSF), consolidated bioprocesses (CBP) combining production of cellulolytic enzymes, hydrolysis of biomass and fermentation into one step, together with an approach combining utilization of both pentose and hexose sugars are discussed and compared with separate hydrolysis and fermentation (SHF) processes. The impact of individual technological steps on final process efficiency is emphasized and the potential for use

  10. Mobile Technology and CAD Technology Integration in Teaching Architectural Design Process for Producing Creative Product

    Science.gov (United States)

    Bin Hassan, Isham Shah; Ismail, Mohd Arif; Mustafa, Ramlee

    2011-01-01

    The purpose of this research is to examine the effect of integrating the mobile and CAD technology on teaching architectural design process for Malaysian polytechnic architectural students in producing a creative product. The website is set up based on Caroll's minimal theory, while mobile and CAD technology integration is based on Brown and…

  11. Designing Robust Process Analytical Technology (PAT) Systems for Crystallization Processes: A Potassium Dichromate Crystallization Case Study

    DEFF Research Database (Denmark)

    Abdul Samad, Noor Asma Fazli Bin; Sin, Gürkan

    2013-01-01

    The objective of this study is to test and validate a Process Analytical Technology (PAT) system design on a potassium dichromate crystallization process in the presence of input uncertainties using uncertainty and sensitivity analysis. To this end a systematic framework for managing uncertaintie...

  12. Multidisciplinary Design Optimization (MDO) Methods: Their Synergy with Computer Technology in Design Process

    Science.gov (United States)

    Sobieszczanski-Sobieski, Jaroslaw

    1998-01-01

    The paper identifies speed, agility, human interface, generation of sensitivity information, task decomposition, and data transmission (including storage) as important attributes for a computer environment to have in order to support engineering design effectively. It is argued that when examined in terms of these attributes the presently available environment can be shown to be inadequate a radical improvement is needed, and it may be achieved by combining new methods that have recently emerged from multidisciplinary design optimization (MDO) with massively parallel processing computer technology. The caveat is that, for successful use of that technology in engineering computing, new paradigms for computing will have to be developed - specifically, innovative algorithms that are intrinsically parallel so that their performance scales up linearly with the number of processors. It may be speculated that the idea of simulating a complex behavior by interaction of a large number of very simple models may be an inspiration for the above algorithms, the cellular automata are an example. Because of the long lead time needed to develop and mature new paradigms, development should be now, even though the widespread availability of massively parallel processing is still a few years away.

  13. Multidisciplinary Design Optimisation (MDO) Methods: Their Synergy with Computer Technology in the Design Process

    Science.gov (United States)

    Sobieszczanski-Sobieski, Jaroslaw

    1999-01-01

    The paper identifies speed, agility, human interface, generation of sensitivity information, task decomposition, and data transmission (including storage) as important attributes for a computer environment to have in order to support engineering design effectively. It is argued that when examined in terms of these attributes the presently available environment can be shown to be inadequate. A radical improvement is needed, and it may be achieved by combining new methods that have recently emerged from multidisciplinary design optimisation (MDO) with massively parallel processing computer technology. The caveat is that, for successful use of that technology in engineering computing, new paradigms for computing will have to be developed - specifically, innovative algorithms that are intrinsically parallel so that their performance scales up linearly with the number of processors. It may be speculated that the idea of simulating a complex behaviour by interaction of a large number of very simple models may be an inspiration for the above algorithms; the cellular automata are an example. Because of the long lead time needed to develop and mature new paradigms, development should begin now, even though the widespread availability of massively parallel processing is still a few years away.

  14. Processing Design of Miniature Casting Incorporating Stereolithography Technologies

    OpenAIRE

    Pei-Hsing Huang; Wei-Ju Huang

    2017-01-01

    Investment casting is commonly used in the production of metallic components with complex shapes, due to its high dimensional precision, good surface finish, and low cost. However, the process is cumbersome, and the period between trial casting and final production can be very long, thereby limiting business opportunities and competitiveness. In this study, we replaced conventional wax injection with stereolithography (SLA) 3D printing to speed up the trial process and reduce costs. We also u...

  15. Process Analytical Technology (PAT): batch-to-batch reproducibility of fermentation processes by robust process operational design and control.

    Science.gov (United States)

    Gnoth, S; Jenzsch, M; Simutis, R; Lübbert, A

    2007-10-31

    The Process Analytical Technology (PAT) initiative of the FDA is a reaction on the increasing discrepancy between current possibilities in process supervision and control of pharmaceutical production processes and its current application in industrial manufacturing processes. With rigid approval practices based on standard operational procedures, adaptations of production reactors towards the state of the art were more or less inhibited for long years. Now PAT paves the way for continuous process and product improvements through improved process supervision based on knowledge-based data analysis, "Quality-by-Design"-concepts, and, finally, through feedback control. Examples of up-to-date implementations of this concept are presented. They are taken from one key group of processes in recombinant pharmaceutical protein manufacturing, the cultivations of genetically modified Escherichia coli bacteria.

  16. A Robust Process Analytical Technology (PAT) System Design for Crystallization Processes

    DEFF Research Database (Denmark)

    Abdul Samad, Noor Asma Fazli Bin; Sin, Gürkan; Gernaey, Krist

    2013-01-01

    A generic computer-aided framework for systematic design of a process monitoring and control system for crystallization processes has been developed to study various aspects of crystallization operations. The design framework contains a generic multidimensional modelling framework, a tool for gen...

  17. Analogical Reasoning in the Engineering Design Process and Technology Education Applications

    OpenAIRE

    2008-01-01

    This synthesis paper discusses the research exploring analogical reasoning, the role of analogies in the engineering design process, and educational applications for analogical reasoning. Researchers have discovered that analogical reasoning is often a fundamental cognitive tool in design problem solving. Regarding the possible role of analogical reasoning in the context of technology education; analogies may be a useful tool to develop student’s design skills, teach abstract or complex conce...

  18. Design principles for corporate venture transition processes in established technology firms

    NARCIS (Netherlands)

    van Burg, J.C.; de Jager, S.; Reymen, I.M.M.J.; Cloodt, M.

    2012-01-01

    Corporate venturing has become a well-known approach toward new business development and strategic renewal for established technology firms. However, without an effectively designed process for aligning and integrating a corporate venture in the established business, the firm increases the risk of

  19. Using innovative instructional technology to meet training needs in public health: a design process.

    Science.gov (United States)

    Millery, Mari; Hall, Michelle; Eisman, Joanna; Murrman, Marita

    2014-03-01

    Technology and distance learning can potentially enhance the efficient and effective delivery of continuing education to the public health workforce. Public Health Training Centers collaborate with instructional technology designers to develop innovative, competency-based online learning experiences that meet pressing training needs and promote best practices. We describe one Public Health Training Center's online learning module design process, which consists of five steps: (1) identify training needs and priority competencies; (2) define learning objectives and identify educational challenges; (3) pose hypotheses and explore innovative, technology-based solutions; (4) develop and deploy the educational experience; and (5) evaluate feedback and outcomes to inform continued cycles of revision and improvement. Examples illustrate the model's application. These steps are discussed within the context of design practices in the fields of education, engineering, and public health. They incorporate key strategies from across these fields, including principles of programmatic design familiar to public health professionals, such as backward design. The instructional technology design process we describe provides a structure for the creativity, collaboration, and systematic strategies needed to develop online learning products that address critical training needs for the public health workforce.

  20. Envisioning future cognitive telerehabilitation technologies: a co-design process with clinicians.

    Science.gov (United States)

    How, Tuck-Voon; Hwang, Amy S; Green, Robin E A; Mihailidis, Alex

    2017-04-01

    Purpose Cognitive telerehabilitation is the concept of delivering cognitive assessment, feedback, or therapeutic intervention at a distance through technology. With the increase of mobile devices, wearable sensors, and novel human-computer interfaces, new possibilities are emerging to expand the cognitive telerehabilitation paradigm. This research aims to: (1) explore design opportunities and considerations when applying emergent pervasive computing technologies to cognitive telerehabilitation and (2) develop a generative co-design process for use with rehabilitation clinicians. Methods We conducted a custom co-design process that used design cards, probes, and design sessions with traumatic brain injury (TBI) clinicians. All field notes and transcripts were analyzed qualitatively. Results Potential opportunities for TBI cognitive telerehabilitation exist in the areas of communication competency, executive functioning, emotional regulation, energy management, assessment, and skill training. Designers of TBI cognitive telerehabilitation technologies should consider how technologies are adapted to a patient's physical/cognitive/emotional state, their changing rehabilitation trajectory, and their surrounding life context (e.g. social considerations). Clinicians were receptive to our co-design approach. Conclusion Pervasive computing offers new opportunities for life-situated cognitive telerehabilitation. Convivial design methods, such as this co-design process, are a helpful way to explore new design opportunities and an important space for further methodological development. Implications for Rehabilitation Designers of rehabilitation technologies should consider how to extend current design methods in order to facilitate the creative contribution of rehabilitation stakeholders. This co-design approach enables a fuller participation from rehabilitation clinicians at the front-end of design. Pervasive computing has the potential to: extend the duration and intensity of

  1. A fast process development flow by applying design technology co-optimization

    Science.gov (United States)

    Chen, Yi-Chieh; Yeh, Shin-Shing; Ou, Tsong-Hua; Lin, Hung-Yu; Mai, Yung-Ching; Lin, Lawrence; Lai, Jun-Cheng; Lai, Ya Chieh; Xu, Wei; Hurat, Philippe

    2017-03-01

    Beyond 40 nm technology node, the pattern weak points and hotspot types increase dramatically. The typical patterns for lithography verification suffers huge turn-around-time (TAT) to handle the design complexity. Therefore, in order to speed up process development and increase pattern variety, accurate design guideline and realistic design combinations are required. This paper presented a flow for creating a cell-based layout, a lite realistic design, to early identify problematic patterns which will negatively affect the yield. A new random layout generating method, Design Technology Co-Optimization Pattern Generator (DTCO-PG), is reported in this paper to create cell-based design. DTCO-PG also includes how to characterize the randomness and fuzziness, so that it is able to build up the machine learning scheme which model could be trained by previous results, and then it generates patterns never seen in a lite design. This methodology not only increases pattern diversity but also finds out potential hotspot preliminarily. This paper also demonstrates an integrated flow from DTCO pattern generation to layout modification. Optical Proximity Correction, OPC and lithographic simulation is then applied to DTCO-PG design database to detect hotspots and then hotspots or weak points can be automatically fixed through the procedure or handled manually. This flow benefits the process evolution to have a faster development cycle time, more complexity pattern design, higher probability to find out potential hotspots in early stage, and a more holistic yield ramping operation.

  2. Design Processes

    DEFF Research Database (Denmark)

    Ovesen, Nis

    2009-01-01

    Inspiration for most research and optimisations on design processes still seem to focus within the narrow field of the traditional design practise. The focus in this study turns to associated businesses of the design professions in order to learn from their development processes. Through interviews...... advantages and challenges of agile processes in mobile software and web businesses are identified. The applicability of these agile processes is discussed in re- gards to design educations and product development in the domain of Industrial Design and is briefly seen in relation to the concept of dromology...

  3. Interactions of double patterning technology with wafer processing, OPC and design flows

    Science.gov (United States)

    Lucas, Kevin; Cork, Chris; Miloslavsky, Alex; Luk-Pat, Gerry; Barnes, Levi; Hapli, John; Lewellen, John; Rollins, Greg; Wiaux, Vincent; Verhaegen, Staf

    2008-03-01

    Double patterning technology (DPT) is one of the main options for printing logic devices with half-pitch less than 45nm; and flash and DRAM memory devices with half-pitch less than 40nm. DPT methods decompose the original design intent into two individual masking layers which are each patterned using single exposures and existing 193nm lithography tools. The results of the individual patterning layers combine to re-create the design intent pattern on the wafer. In this paper we study interactions of DPT with lithography, masks synthesis and physical design flows. Double exposure and etch patterning steps create complexity for both process and design flows. DPT decomposition is a critical software step which will be performed in physical design and also in mask synthesis. Decomposition includes cutting (splitting) of original design intent polygons into multiple polygons where required; and coloring of the resulting polygons. We evaluate the ability to meet key physical design goals such as: reduce circuit area; minimize rework; ensure DPT compliance; guarantee patterning robustness on individual layer targets; ensure symmetric wafer results; and create uniform wafer density for the individual patterning layers.

  4. A Co-Design Process Microanalysis: Stages and Facilitators of an Inquiry-Based and Technology-Enhanced Learning Scenario

    Science.gov (United States)

    Barbera, Elena; Garcia, Iolanda; Fuertes-Alpiste, Marc

    2017-01-01

    This paper presents a case study of the co-design process for an online course on Sustainable Development (Degree in Tourism) involving the teacher, two students, and the project researchers. The co-design process was founded on an inquiry-based and technology-enhanced model that takes shape in a set of design principles. The research had two main…

  5. Application of additive laser technologies in the gas turbine blades design process

    Science.gov (United States)

    Shevchenko, I. V.; Rogalev, A. N.; Osipov, S. K.; Bychkov, N. M.; Komarov, I. I.

    2017-11-01

    An emergence of modern innovative technologies requires delivering new and modernization existing design and production processes. It is especially relevant for designing the high-temperature turbines of gas turbine engines, development of which is characterized by a transition to higher parameters of working medium in order to improve their efficient performance. A design technique for gas turbine blades based on predictive verification of thermal and hydraulic models of their cooling systems by testing of a blade prototype fabricated using the selective laser melting technology was presented in this article. Technique was proven at the time of development of the first stage blade cooling system for the high-pressure turbine. An experimental procedure for verification of a thermal model of the blades with convective cooling systems based on the comparison of heat-flux density obtained from the numerical simulation data and results of tests in a liquid-metal thermostat was developed. The techniques makes it possible to obtain an experimentally tested blade version and to exclude its experimental adjustment after the start of mass production.

  6. A Design Perspective on Aligning Process-Centric and Technology-Centric Approaches

    DEFF Research Database (Denmark)

    Siurdyban, Artur; Svejvig, Per; Møller, Charles

    2012-01-01

    Enterprise Systems Management (ESM) and Business Process Management (BPM) have evolved as alternative approaches to operational transformation. As a result, companies struggle to find the right balance when prioritizing technology and processes as change drivers. The purpose of this paper...

  7. ECO DESIGN IN DESIGN PROCESS

    Directory of Open Access Journals (Sweden)

    PRALEA Jeni

    2014-05-01

    Full Text Available Eco-design is a new domain, required by the new trends and existing concerns worldwide, generated by the necessity of adopting new design principles. New design principles require the designer to provide a friendly relationship between concept created, environment and consume. This "friendly" relationship should be valid both at present and in the future, generating new opportunities for product, product components or materials from which it was made. Awareness, by the designer, the importance of this new trend, permits the establishment of concepts that have as their objective the protection of present values and ensuring the legacy of future generations. Ecodesig, by its principles, is involved in the design process, from early stage, the stage of product design. Priority objective of the designers will consist in reducing the negative effects on the environment through the entire life cycle and after it is taken out of use. The main aspects of the eco-design will consider extending product exploitation, make better use of materials, reduction of emission of waste. The design process in the "eco"domein must be started by selecting the function of the concept, materials and technological processes, causing the shape of macro and micro geometric of the product through an analysis that involves optimizing and streamlining the product. This paper presents the design process of a cross-sports footwear concept, built on the basis of the principles of ecodesign

  8. How to design the cost-effectiveness appraisal process of new healthcare technologies to maximise population health: A conceptual framework.

    Science.gov (United States)

    Johannesen, Kasper M; Claxton, Karl; Sculpher, Mark J; Wailoo, Allan J

    2018-02-01

    This paper presents a conceptual framework to analyse the design of the cost-effectiveness appraisal process of new healthcare technologies. The framework characterises the appraisal processes as a diagnostic test aimed at identifying cost-effective (true positive) and non-cost-effective (true negative) technologies. Using the framework, factors that influence the value of operating an appraisal process, in terms of net gain to population health, are identified. The framework is used to gain insight into current policy questions including (a) how rigorous the process should be, (b) who should have the burden of proof, and (c) how optimal design changes when allowing for appeals, price reductions, resubmissions, and re-evaluations. The paper demonstrates that there is no one optimal appraisal process and the process should be adapted over time and to the specific technology under assessment. Optimal design depends on country-specific features of (future) technologies, for example, effect, price, and size of the patient population, which might explain the difference in appraisal processes across countries. It is shown that burden of proof should be placed on the producers and that the impact of price reductions and patient access schemes on the producer's price setting should be considered when designing the appraisal process. Copyright © 2017 John Wiley & Sons, Ltd.

  9. Analogical Reasoning in the Engineering Design Process and Technology Education Applications

    Science.gov (United States)

    Daugherty, Jenny; Mentzer, Nathan

    2008-01-01

    This synthesis paper discusses the research exploring analogical reasoning, the role of analogies in the engineering design process, and educational applications for analogical reasoning. Researchers have discovered that analogical reasoning is often a fundamental cognitive tool in design problem solving. Regarding the possible role of analogical…

  10. Lipid technology: Property prediction and process design/analysis in the edible oil and biodiesel industries

    DEFF Research Database (Denmark)

    Díaz Tovar, Carlos Axel; Gani, Rafiqul; Sarup, Bent

    2011-01-01

    In this work some of the property related issues in lipid processing technology employed in edible oil and biodiesel production are highlighted. This includes the identification of the most representative chemical species (acylglycerides, free fatty acids, tocopherols, sterols, carotenes, and fatty...

  11. Toward a new information infrastructure in health technology assessment: communication, design, process, and results.

    Science.gov (United States)

    Neikter, Susanna Allgurin; Rehnqvist, Nina; Rosén, Måns; Dahlgren, Helena

    2009-12-01

    The aim of this study was to facilitate effective internal and external communication of an international network and to explore how to support communication and work processes in health technology assessment (HTA). STRUCTURE AND METHODS: European network for Health Technology Assessment (EUnetHTA) connected sixty-four HTA Partner organizations from thirty-three countries. User needs in the different steps of the HTA process were the starting point for developing an information system. A step-wise, interdisciplinary, creative approach was used in developing practical tools. An Information Platform facilitated the exchange of scientific information between Partners and with external target groups. More than 200 virtual meetings were set up during the project using an e-meeting tool. A Clearinghouse prototype was developed with the intent to offering a single point of access to HTA relevant information. This evolved into a next step not planned from the outset: Developing a running HTA Information System including several Web-based tools to support communication and daily HTA processes. A communication strategy guided the communication effort, focusing on practical tools, creating added value, involving stakeholders, and avoiding duplication of effort. Modern technology enables a new information infrastructure for HTA. The potential of information and communication technology was used as a strategic tool. Several target groups were represented among the Partners, which supported collaboration and made it easier to identify user needs. A distinctive visual identity made it easier to gain and maintain visibility on a limited budget.

  12. Introducing uncertainty analysis of nucleation and crystal growth models in Process Analytical Technology (PAT) system design of crystallization processes

    DEFF Research Database (Denmark)

    Abdul Samad, Noor Asma Fazli Bin; Sin, Gürkan; Gernaey, Krist

    2013-01-01

    This paper presents the application of uncertainty and sensitivity analysis as part of a systematic modelbased process monitoring and control (PAT) system design framework for crystallization processes. For the uncertainty analysis, the Monte Carlo procedure is used to propagate input uncertainty...

  13. VLSI signal processing technology

    CERN Document Server

    Swartzlander, Earl

    1994-01-01

    This book is the first in a set of forthcoming books focussed on state-of-the-art development in the VLSI Signal Processing area. It is a response to the tremendous research activities taking place in that field. These activities have been driven by two factors: the dramatic increase in demand for high speed signal processing, especially in consumer elec­ tronics, and the evolving microelectronic technologies. The available technology has always been one of the main factors in determining al­ gorithms, architectures, and design strategies to be followed. With every new technology, signal processing systems go through many changes in concepts, design methods, and implementation. The goal of this book is to introduce the reader to the main features of VLSI Signal Processing and the ongoing developments in this area. The focus of this book is on: • Current developments in Digital Signal Processing (DSP) pro­ cessors and architectures - several examples and case studies of existing DSP chips are discussed in...

  14. Application of the CBR method for adding the technological process designing

    Science.gov (United States)

    Ociepka, P.; Herbuś, K.

    2016-08-01

    The manufacturing process is a very important step in the process of new products creating. The market trends cause that the process must be very flexible to facilitate fast and cost-effective adaptation to changing market conditions. Commonly used CNC machine tools, grouped in flexible production systems significantly facilitate fast production adjusting to these dynamic changes. The programs for CNC machine tools could be easily modified or generated in the CAM class programs. It remains, however, the technological process, which should be planned and continuously optimized with respect to new details being produced. In this paper is proposed the method basing on the engineering knowledge and experience for adding the process of production preparation. The method, developed by authors, is based on the CBR (Case Based Reasoning) technique. CBR is a method of problems solving. It bases on seeking an analogy (similarity) between the task currently being solved, and the earlier tasks that had already been solved. The article presents an algorithm and formalized description of the developed method.

  15. Designing Human Technologies

    DEFF Research Database (Denmark)

    Simonsen, Jesper

    Research Initiative supporting Roskilde University’s new Humanities and Technology bachelor programme (‘HumTek’), and its three dimensions: Design, Humanities, and Technology. The research initiative involves 70 researchers from different departments and research groups at Roskilde University through...... a shared interdisciplinary research and educational collaboration. As a creative research initiative it focuses on change and innovative thinking. The innovativeness is a result of the strongly interdisciplinary perspective which is at the heart of Designing Human Technologies. Designing Human Technologies......Design is increasingly becoming a part of the university curriculum and research agenda. The keynote present and discuss Designing Human Technologies – an initiative aiming at establishing a design oriented main subject area alongside traditional main subject areas such as Natural Science...

  16. Virtual Welded-Joint Design Integrating Advanced Materials and Processing Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Z.; Dong, P.; Liu, S.; Babu, S.; Olson, G.; DebRoy, T.

    2005-04-15

    The primary goal of this project is to increase the fatigue life of a welded-joint by 10 times and to reduce energy use by 25% through product performance and productivity improvements using an integrated modeling approach. The fatigue strength of a welded-joint is currently the bottleneck to design high performance and lightweight welded structures using advanced materials such as high strength steels. In order to achieve high fatigue strength in a welded-joint it is necessary to manage the weld bead shape for lower stress concentration, produce preferable residual stress distribution, and obtain the desired microstructure for improved material toughness and strength. This is a systems challenge that requires the optimization of the welding process, the welding consumable, the base material, as well as the structure design. The concept of virtual welded-joint design has been proposed and established in this project. The goal of virtual welded-joint design is to develop a thorough procedure to predict the relationship of welding process, microstructure, property, residual stress, and the ultimate weld fatigue strength by a systematic modeling approach. The systematic approach combines five sub-models: weld thermal-fluid model, weld microstructure model, weld material property model, weld residual stress model, and weld fatigue model. The systematic approach is thus based on interdisciplinary applied sciences including heat transfer, computational fluid dynamics, materials science, engineering mechanics, and material fracture mechanics. The sub-models are based on existing models with further development. The results from modeling have been validated with critical experiments. The systematic modeling approach has been used to design high fatigue resistant welds considering the combined effects of weld bead geometry, residual stress, microstructure, and material property. In particular, a special welding wire has been developed in this project to introduce

  17. Design approaches for solar industrial process-heat systems: nontracking and line-focus collector technologies

    Energy Technology Data Exchange (ETDEWEB)

    Kutscher, C.F.; Davenport, R.L.; Dougherty, D.A.; Gee, R.C.; Masterson, P.M.; May, E.K.

    1982-08-01

    The design methodology for solar industrial process heat systems is described, and an overview is given of the use of solar energy in industry. A way to determine whether solar energy makes sense for a particular application is described. The basic system configurations used to supply hot water or steam are discussed, and computer-generated graphs are supplied that allow the user to select a collector type. Detailed energy calculations are provided, including the effects of thermal losses and storage. The selection of subsystem components is described, and control systems, installation and start-up details, economics, and safety and environmental issues are explained. (LEW)

  18. Participatory Design & Health Information Technology

    DEFF Research Database (Denmark)

    Health Information Technology (HIT) continues to increase in importance as a component of healthcare provision, but designing HIT is complex. The creation of cooperative learning processes for future HIT users is not a simple task. The importance of engaging end users such as health professionals......, in collaboration with a wide range of people, a broad repertoire of methods and techniques to apply PD within multiple domains has been established. This book, Participatory Design & Health Information Technology, presents the contributions of researchers from 5 countries, who share their experience and insights......, patients and relatives in the design process is widely acknowledged, and Participatory Design (PD) is the primary discipline for directly involving people in the technological design process. Exploring the application of PD in HIT is crucial to all those involved in engaging end users in HIT design and...

  19. Introducing uncertainty analysis of nucleation and crystal growth models in Process Analytical Technology (PAT) system design of crystallization processes.

    Science.gov (United States)

    Samad, Noor Asma Fazli Abdul; Sin, Gürkan; Gernaey, Krist V; Gani, Rafiqul

    2013-11-01

    This paper presents the application of uncertainty and sensitivity analysis as part of a systematic model-based process monitoring and control (PAT) system design framework for crystallization processes. For the uncertainty analysis, the Monte Carlo procedure is used to propagate input uncertainty, while for sensitivity analysis, global methods including the standardized regression coefficients (SRC) and Morris screening are used to identify the most significant parameters. The potassium dihydrogen phosphate (KDP) crystallization process is used as a case study, both in open-loop and closed-loop operation. In the uncertainty analysis, the impact on the predicted output of uncertain parameters related to the nucleation and the crystal growth model has been investigated for both a one- and two-dimensional crystal size distribution (CSD). The open-loop results show that the input uncertainties lead to significant uncertainties on the CSD, with appearance of a secondary peak due to secondary nucleation for both cases. The sensitivity analysis indicated that the most important parameters affecting the CSDs are nucleation order and growth order constants. In the proposed PAT system design (closed-loop), the target CSD variability was successfully reduced compared to the open-loop case, also when considering uncertainty in nucleation and crystal growth model parameters. The latter forms a strong indication of the robustness of the proposed PAT system design in achieving the target CSD and encourages its transfer to full-scale implementation. Copyright © 2013 Elsevier B.V. All rights reserved.

  20. A sensitivity analysis of process design parameters, commodity prices and robustness on the economics of odour abatement technologies.

    Science.gov (United States)

    Estrada, José M; Kraakman, N J R Bart; Lebrero, Raquel; Muñoz, Raúl

    2012-01-01

    The sensitivity of the economics of the five most commonly applied odour abatement technologies (biofiltration, biotrickling filtration, activated carbon adsorption, chemical scrubbing and a hybrid technology consisting of a biotrickling filter coupled with carbon adsorption) towards design parameters and commodity prices was evaluated. Besides, the influence of the geographical location on the Net Present Value calculated for a 20 years lifespan (NPV20) of each technology and its robustness towards typical process fluctuations and operational upsets were also assessed. This comparative analysis showed that biological techniques present lower operating costs (up to 6 times) and lower sensitivity than their physical/chemical counterparts, with the packing material being the key parameter affecting their operating costs (40-50% of the total operating costs). The use of recycled or partially treated water (e.g. secondary effluent in wastewater treatment plants) offers an opportunity to significantly reduce costs in biological techniques. Physical/chemical technologies present a high sensitivity towards H2S concentration, which is an important drawback due to the fluctuating nature of malodorous emissions. The geographical analysis evidenced high NPV20 variations around the world for all the technologies evaluated, but despite the differences in wage and price levels, biofiltration and biotrickling filtration are always the most cost-efficient alternatives (NPV20). When, in an economical evaluation, the robustness is as relevant as the overall costs (NPV20), the hybrid technology would move up next to BTF as the most preferred technologies. Copyright © 2012 Elsevier Inc. All rights reserved.

  1. Strategy for design NIR calibration sets based on process spectrum and model space: An innovative approach for process analytical technology.

    Science.gov (United States)

    Cárdenas, V; Cordobés, M; Blanco, M; Alcalà, M

    2015-10-10

    The pharmaceutical industry is under stringent regulations on quality control of their products because is critical for both, productive process and consumer safety. According to the framework of "process analytical technology" (PAT), a complete understanding of the process and a stepwise monitoring of manufacturing are required. Near infrared spectroscopy (NIRS) combined with chemometrics have lately performed efficient, useful and robust for pharmaceutical analysis. One crucial step in developing effective NIRS-based methodologies is selecting an appropriate calibration set to construct models affording accurate predictions. In this work, we developed calibration models for a pharmaceutical formulation during its three manufacturing stages: blending, compaction and coating. A novel methodology is proposed for selecting the calibration set -"process spectrum"-, into which physical changes in the samples at each stage are algebraically incorporated. Also, we established a "model space" defined by Hotelling's T(2) and Q-residuals statistics for outlier identification - inside/outside the defined space - in order to select objectively the factors to be used in calibration set construction. The results obtained confirm the efficacy of the proposed methodology for stepwise pharmaceutical quality control, and the relevance of the study as a guideline for the implementation of this easy and fast methodology in the pharma industry. Copyright © 2015 Elsevier B.V. All rights reserved.

  2. Inclusive Design for Assistive Technology

    DEFF Research Database (Denmark)

    Herriott, Richard

    2014-01-01

    base. However, the conditions under which mainstream ID operates are not the same as those for AT. The scale of projects is smaller as tend to be the organisations that do such work. The models for ID design processes are designed for commercially-driven, medium-to-large scale concerns. This raises...... the question of whether AT design processes fit neatly into a model created for a different context . Semi-structured interviews were carried out with eight/nine designers of assistive technology. This provided raw data concerning the processes used by the designers in a range of products including...

  3. Ethics and technology design

    DEFF Research Database (Denmark)

    Albrechtslund, Anders

    2007-01-01

    This article offers a discussion of the connection between technology and values and, specifically, I take a closer look at ethically sound design. In order to bring the discussion into a concrete context, the theory of Value Sensitive Design (VSD) will be the focus point. To illustrate my argument...... concerning design ethics, the discussion involves a case study of an augmented window, designed by the VSD Research Lab, which has turned out to be a potentially surveillance-enabling technology. I call attention to a "positivist problem" that has to do with the connection between the design context......, a design theory must accept that foresight is limited to anticipation rather than prediction. To overcome the positivist problem, I suggest a phenomenological approach to technology inspired by Don Ihde's concept of multistability. This argument, which is general in nature and thus applies to any theory...

  4. Ethics and technology design

    DEFF Research Database (Denmark)

    Albrechtslund, Anders

    2007-01-01

    This article offers a discussion of the connection between technology and values and, specifically, I take a closer look at ethically sound design. In order to bring the discussion into a concrete context, the theory of Value Sensitive Design (VSD) will be the focus point. To illustrate my argument...... concerning design ethics, the discussion involves a case study of an augmented window, designed by the VSD Research Lab, which has turned out to be a potentially surveillance-enabling technology. I call attention to a "positivist problem" that has to do with the connection between the design context...... of design ethics, is intended as a constructive criticism, which can hopefully contribute to the further development of design ethics....

  5. Ethics and technology design

    DEFF Research Database (Denmark)

    Albrechtslund, Anders

    This article offers a discussion of the connection between technology and values and, specifically, I take a closer look at ethically sound design. In order to bring the discussion into a concrete context, the theory of Value Sensitive Design (VSD) will be the focus point. To illustrate my argument...... concerning design ethics, the discussion involves a case study of an augmented window, designed by the VSD Research Lab, which has turned out to be a potentially surveillanceenabling technology. I call attention to a “positivist problem” that has to do with the connection between the design context...... of design ethics, is intended as a constructive criticism, which can hopefully contribute to the further development of design ethics....

  6. Interactive computer aided technology, evolution in the design/manufacturing process

    Science.gov (United States)

    English, C. H.

    1975-01-01

    A powerful computer-operated three dimensional graphic system and associated auxiliary computer equipment used in advanced design, production design, and manufacturing was described. This system has made these activities more productive than when using older and more conventional methods to design and build aerospace vehicles. With the use of this graphic system, designers are now able to define parts using a wide variety of geometric entities, define parts as fully surface 3-dimensional models as well as "wire-frame" models. Once geometrically defined, the designer is able to take section cuts of the surfaced model and automatically determine all of the section properties of the planar cut, lightpen detect all of the surface patches and automatically determine the volume and weight of the part. Further, his designs are defined mathematically at a degree of accuracy never before achievable.

  7. Integration of Media Design Processes in Science, Technology, Engineering, and Mathematics (STEM) Education

    Science.gov (United States)

    Karahan, Engin; Canbazoglu Bilici, Sedef; Unal, Aycin

    2015-01-01

    Problem Statement: Science, technology, engineering and mathematics (STEM) education aims at improving students' knowledge and skills in science and math, and thus their attitudes and career choices in these areas. The ultimate goal in STEM education is to create scientifically literate individuals who can survive in the global economy. The…

  8. Fundamentals of semiconductor processing technology

    CERN Document Server

    El-Kareh, Badih

    1995-01-01

    The drive toward new semiconductor technologies is intricately related to market demands for cheaper, smaller, faster, and more reliable circuits with lower power consumption. The development of new processing tools and technologies is aimed at optimizing one or more of these requirements. This goal can, however, only be achieved by a concerted effort between scientists, engineers, technicians, and operators in research, development, and manufac­ turing. It is therefore important that experts in specific disciplines, such as device and circuit design, understand the principle, capabil­ ities, and limitations of tools and processing technologies. It is also important that those working on specific unit processes, such as lithography or hot processes, be familiar with other unit processes used to manufacture the product. Several excellent books have been published on the subject of process technologies. These texts, however, cover subjects in too much detail, or do not cover topics important to modem tech­ n...

  9. Emergent methods, methodologies, technologies and tools for design and engineering processes

    NARCIS (Netherlands)

    Wendrich, Robert E.; Horvath, I.; Suarez, J.P.

    2018-01-01

    This (borderline, shallow) paper is a raw perspective, a take on, partly based on, and inspired by the work of Goldschmidt [01], Gabora [02] and Tversky [03] who assert that visual and meta-cognitive stimuli constructed from multiple experiences and multiple modalities in ‘design spaces’ (i.e.

  10. Technology or Process First?

    DEFF Research Database (Denmark)

    Siurdyban, Artur Henryk; Svejvig, Per; Møller, Charles

    between them using strategic alignment, Enterprise Systems and Business Process Management theories. We argue that the insights from these cases can lead to a better alignment between process and technology. Implications for practice include the direction towards a closer integration of process......Enterprise Systems Management (ESM) and Business Pro- cess Management (BPM), although highly correlated, have evolved as alternative and mutually exclusive approaches to corporate infrastruc- ture. As a result, companies struggle to nd the right balance between technology and process factors...... in infrastructure implementation projects. The purpose of this paper is articulate a need and a direction to medi- ate between the process-driven and the technology-driven approaches. Using a cross-case analysis, we gain insight into two examples of sys- tems and process implementation. We highlight the dierences...

  11. Desalination processes and technologies

    International Nuclear Information System (INIS)

    Furukawa, D.H.

    1996-01-01

    Reasons of the development of desalination processes, the modern desalination technologies, such as multi-stage flash evaporation, multi-effect distillation, reverse osmosis, and the prospects of using nuclear power for desalination purposes are discussed. 9 refs

  12. MODELS AND ALGORITHMS FOR COMPUTER-AIDED DESIGN OF TECHNOLOGICAL PROCESS OF CASTINGS PRODUCTION, DIRECTED FOR SUPERCOMPUTER SKIF

    Directory of Open Access Journals (Sweden)

    A. N. Chichko

    2009-01-01

    Full Text Available The schema of development and technological process of castings production under supercomputer SKIF,  which al lows to decrease the periods of gating systems projecting, is  offered.  The model for appraisal of the variants of the castings production technology, which allows to range the modeled  technological processes and to choose the optimal regimes and gating system, is developed.

  13. Technologies for Optical Processing

    DEFF Research Database (Denmark)

    Stubkjær, Kristian

    2008-01-01

    The article consists of a Powerpoint presentation on technologies for optical processing. The paper concludes that the nonlinear elements based on SOA, fibers and waveguide structures have capabilities of simple processing at data rates of 100-600 Gb/s. Switching powers comparable to electronics...

  14. Reengineering the Project Design Process

    Science.gov (United States)

    Casani, E.; Metzger, R.

    1994-01-01

    In response to NASA's goal of working faster, better and cheaper, JPL has developed extensive plans to minimize cost, maximize customer and employee satisfaction, and implement small- and moderate-size missions. These plans include improved management structures and processes, enhanced technical design processes, the incorporation of new technology, and the development of more economical space- and ground-system designs. The Laboratory's new Flight Projects Implementation Office has been chartered to oversee these innovations and the reengineering of JPL's project design process, including establishment of the Project Design Center and the Flight System Testbed. Reengineering at JPL implies a cultural change whereby the character of its design process will change from sequential to concurrent and from hierarchical to parallel. The Project Design Center will support missions offering high science return, design to cost, demonstrations of new technology, and rapid development. Its computer-supported environment will foster high-fidelity project life-cycle development and cost estimating.

  15. The Effects of Integrating Mobile and CAD Technology in Teaching Design Process for Malaysian Polytechnic Architecture Student in Producing Creative Product

    Science.gov (United States)

    Hassan, Isham Shah; Ismail, Mohd Arif; Mustapha, Ramlee

    2010-01-01

    The purpose of this research is to examine the effect of integrating the digital media such as mobile and CAD technology on designing process of Malaysian polytechnic architecture students in producing a creative product. A website is developed based on Caroll's minimal theory, while mobile and CAD technology integration is based on Brown and…

  16. Application of the Ecological Interface Design concept to the development of displays for technological process monitoring and control

    International Nuclear Information System (INIS)

    Tschiesche, Jiri; Svatek, Jan

    2011-01-01

    The new approach to the design and implementation of the displays referred to as Ecological Interface Design (EID) is described. The EID concept is aimed at creating a system that provides plant managers with relevant information for safe and economically feasible technology control in a clear, graphic form in any situation. (orig.)

  17. Photon technology. Laser processing technology; Photon technology. Laser process gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Survey has been conducted to develop laser processing technology utilizing the interaction between substance and photon. This is a part of the leading research on photon technology development. The photon technology development is aimed at novel technology development highly utilizing the quantum nature of photons. In the field of laser processing, high quality photons are used as tools, special functions of atoms and molecules will be discovered, and processing for functional fabrication (photon machining) will be established. A role of laser processing in industries has become significant, which is currently spreading not only into cutting and welding of materials and scalpels but also into such a special field as ultrafine processing of materials. The spreading is sometimes obstructed due to the difficulty of procurement of suitable machines and materials, and the increase of cost. The purpose of this study is to develop the optimal laser technology, to elucidate the interaction between substance and photon, and to develop the laser system and the transmission and regulation systems which realize the optimal conditions. 387 refs., 115 figs., 25 tabs.

  18. TECHNOLOGY OF EDUCATIONAL EVENTS DESIGNING

    Directory of Open Access Journals (Sweden)

    N. V. Volkova

    2017-01-01

    Full Text Available The aim of the article is to prove and disclose the essence of the author’s technology of educational events designing.Methodology and methods of research. Methodological basis of work is humanitarian approach. The method of pedagogical modeling was used for the model development of educational events influence on pedagogical activity formation. The content analysis of texts descriptions, case-study method, expert estimations of event projects were applied as the main methods of efficiency confirmation of the technology of educational events design.Results and scientific novelty. The characteristics of an educational event are emphasized by means of an empirical way: opening (what a person opens for himself; generation (a result of a personal action; and participation in creation of something "new" (new communications, relations and experience. The structure of technology of educational events design including work with concepts (an educational event, substantial and procedural components is presented. The technology of educational events designing is considered as the process of the well-grounded choice of designing technologies, mutual activity, pedagogical communication, components of educational activity: contents, methods, means, and organizational forms depending on educational aims due to age-specific peculiarities of participants of the educational event. The main conditions providing successful use of the technology are the involvement into joint cognitive activity of all its participants and importance of the events for each of them that qualitatively change the nature of a cognitive process and generate real transformations of the reality.Practical significance. The author’s experience in teaching testifies to introduction of the module «Technology of Design of Educational Events» into the basic educational subject-module «Design Competence of the Teacher» (degree program «Pedagogical Education», considering this module as

  19. MHR Design, Technology, and Applications

    International Nuclear Information System (INIS)

    Campbell, Michael; Shenoy, Arkal; Venneri, Francesco; Richards, Matthew

    2007-01-01

    The Modular Helium Reactor (MHR) is one of the Very High Temperature Reactor (VHTR) concepts being proposed for the U.S. Department of Energy (DOE) Next Generation Nuclear Plant (NGNP) project. Other countries, including Russia, Japan, South Korea, China, South Africa, and France are also developing VHTR technology, and large-scale deployment of VHTR technology is a realistic element of future energy-growth scenarios. In this paper, we discuss MHR conceptual designs for electricity, hydrogen production, and other process-heat applications, and their role in a sustainable energy future with significant growth in nuclear energy

  20. Research and optimization of the technological process of manufacturing a GTE blades using computer-aided design

    Science.gov (United States)

    Vdovin, R. A.; Smelov, V. G.

    2016-11-01

    This paper discusses an approach to prediction of the generation of pouring defects using the example of a technological process of manufacturing GTE blades. A computer-based modeling system for foundry processes, ProCast, was used as a tool for this research. Possible reasons of the formation of defects were considered and the recommendations for their elimination were provided.

  1. Particle processing technology

    Science.gov (United States)

    Yoshio, Sakka

    2014-02-01

    In recent years, there has been strong demand for the development of novel devices and equipment that support advanced industries including IT/semiconductors, the environment, energy and aerospace along with the achievement of higher efficiency and reduced environmental impact. Many studies have been conducted on the fabrication of innovative inorganic materials with novel individual properties and/or multifunctional properties including electrical, dielectric, thermal, optical, chemical and mechanical properties through the development of particle processing. The fundamental technologies that are key to realizing such materials are (i) the synthesis of nanoparticles with uniform composition and controlled crystallite size, (ii) the arrangement/assembly and controlled dispersion of nanoparticles with controlled particle size, (iii) the precise structural control at all levels from micrometer to nanometer order and (iv) the nanostructural design based on theoretical/experimental studies of the correlation between the local structure and the functions of interest. In particular, it is now understood that the application of an external stimulus, such as magnetic energy, electrical energy and/or stress, to a reaction field is effective in realizing advanced particle processing [1-3]. This special issue comprises 12 papers including three review papers. Among them, seven papers are concerned with phosphor particles, such as silicon, metals, Si3N4-related nitrides, rare-earth oxides, garnet oxides, rare-earth sulfur oxides and rare-earth hydroxides. In these papers, the effects of particle size, morphology, dispersion, surface states, dopant concentration and other factors on the optical properties of phosphor particles and their applications are discussed. These nanoparticles are classified as zero-dimensional materials. Carbon nanotubes (CNT) and graphene are well-known one-dimensional (1D) and two-dimensional (2D) materials, respectively. This special issue also

  2. The potential of pyrolysis technology in climate change mitigation - influence of process design and - parameters, simulated in SuperPro Designer software

    Energy Technology Data Exchange (ETDEWEB)

    Thomsen, T.; Hauggaard-Nielsen, H.; Bruun, E.W.; Ahrenfeldt, J.

    2011-01-15

    This report investigates whether or not it would be possible to produce carbon-negative energy from pyrolysis of wheat straw in a series of Danish agricultural scenarios. A combination of process simulation in SuperPro Designer software, correlations derived from literature studies and experimental work, and overall balance calculations has been applied in the process. The study deviates from other studies of pyrolysis and biochar production by the inclusion of substitution energy impact on the overall carbon-balance. Substitution energy is integrated to account for the gap between the energy production from the pyrolysis and the full energy potential of the biomass, quantified by complete conversion in either combustion or gasification systems. It was concluded that it is feasible to produce carbon-negative energy under a variation of different settings, but also that the negative carbon-balance is only robust for the slow pyrolysis scenario. The CO{sub 2} benefit of the most carbon-negative slow pyrolysis process is estimated to be around 10 % of the atmospheric carbon stored in the original biomass when natural gas is applied for energy substitution. This process avoids the emission of around 150-200 kg CO{sub 2}/ton wheat straw with substitution energy with a Denmark 2007 average carbon-intensity. This result is weighted against the net emissions of the carbon-'neutral' process of conventional combustion. This emission is in this report estimated to be around 50 - 150 kg CO{sub 2}/ton straw depending on scenario settings. The final results of the study have been compared to another study with convincing results. Results concluded that the primary force of the pyrolysis technology is the recalcitrant char product and not the pyrolysis oil. Based on this, the study suggests that despite the trend in commercial pyrolysis technology that focuses on fast pyrolysis processes with maximized bio-oil production, the twin challenge of climate mitigation and

  3. Multicriteria process development and design

    Energy Technology Data Exchange (ETDEWEB)

    Cziner, K. [Helsinki Univ. of Technology, Espoo (Finland). Lab. of Chemical Engineering and Plant Design

    2006-07-01

    Structural and societal changes in process industry have lead to new requirements in process development, design and project management. The growing importance of health, safety and environmental aspects has increased the number of criteria considered in design. The decisions have to be made in a multicriteria environment considering uncertainty and the life-cycle point of view. Process industry has also changed toward more specialized products. The advanced design methodologies such as clean technology and inherently safer design are emphasizing early conceptual decisions for process efficiency. The traditional methods of design, research and development projects are therefore always not adequate. The thesis presents new methods and approaches to respond to the new challenges in process development and design, which attempt to amalgamate process design with design process management and the important extension of process integration towards the consideration of process sustainability; extending the horizon to process life-cycle and offering a systematic aid to decision making at the conceptual design stage aiming at multicriteria optimality. The methods presented include: (1) Extended problem solving based method for process design, (2) analytic hierarchy process based multicriteria decision making approach for process concept evaluations, (3) genetic algorithm based process synthesis method using multicriteria approach under uncertainty, (4) evaluative approach to process development, (5) enhanced modeling approach for different life-cycle phases and model library, (6) approach for multicriteria based assessment with life-cycle perspective and (7) decision based project management tool for product and process development projects. The combined approach presented includes these methods together with scope of evaluation definition, life-cycle indicators and a tool pack of general methods. (orig.)

  4. Quality by design (QbD), Process Analytical Technology (PAT), and design of experiment applied to the development of multifunctional sunscreens.

    Science.gov (United States)

    Peres, Daniela D'Almeida; Ariede, Maira Bueno; Candido, Thalita Marcilio; de Almeida, Tania Santos; Lourenço, Felipe Rebello; Consiglieri, Vladi Olga; Kaneko, Telma Mary; Velasco, Maria Valéria Robles; Baby, André Rolim

    2017-02-01

    Multifunctional formulations are of great importance to ensure better skin protection from harm caused by ultraviolet radiation (UV). Despite the advantages of Quality by Design and Process Analytical Technology approaches to the development and optimization of new products, we found in the literature only a few studies concerning their applications in cosmetic product industry. Thus, in this research work, we applied the QbD and PAT approaches to the development of multifunctional sunscreens containing bemotrizinol, ethylhexyl triazone, and ferulic acid. In addition, UV transmittance method was applied to assess qualitative and quantitative critical quality attributes of sunscreens using chemometrics analyses. Linear discriminant analysis allowed classifying unknown formulations, which is useful for investigation of counterfeit and adulteration. Simultaneous quantification of ethylhexyl triazone, bemotrizinol, and ferulic acid presented at the formulations was performed using PLS regression. This design allowed us to verify the compounds in isolation and in combination and to prove that the antioxidant action of ferulic acid as well as the sunscreen actions, since the presence of this component increased 90% of antioxidant activity in vitro.

  5. Strategic framework for education and training in Quality by Design (QbD) and process analytical technology (PAT)

    DEFF Research Database (Denmark)

    de Matas, Marcel; De Beer, Thomas; Folestad, Staffan

    2016-01-01

    a structured framework for education, training and continued professional development, which comprises a number of pillars covering the fundamental principles of modern pharmaceutical development including the underpinning aspects of science, engineering and technology innovation. The framework...... advanced science and technology coupled with the application of modern Quality by Design (QbD) principles. In order that Europe keeps pace with these changes and sustains its position as major player in the development and commercialization of medicines, it is essential that measures are put in place......The regulatory and technical landscape of the pharmaceutical field is rapidly evolving from one focused predominantly on development of small molecules, using well established manufacturing technologies towards an environment in which biologicals and complex modalities are being developed using...

  6. How Technology Influences Interior Design.

    Science.gov (United States)

    McDavitt, Tish

    1999-01-01

    Examines telecommunication technology's influences on interior school design and effective learning, and discusses how to implement this technology into the school. Building the infrastructure to support telecommunications in an educational setting and the importance of effective lighting are discussed. (GR)

  7. Progressive technologies in furniture design

    OpenAIRE

    Šebková, Martina

    2014-01-01

    Šebková, M. Progressive technologies in furniture design. Diploma thesis, Brno, Mendel University in Brno, 2014 Diploma thesis 'Progressive technologies in furniture design' is focused on the use of modern technologies in furniture production. The theoretical part explains the basic terms, technology and material options. It focuses mainly on the production of 3D printed furniture and possibilities of virtual testing, measurements, scanning and rapid prototyping. Practical part of diploma the...

  8. FACTORS AFFECTING TEACHING THE CONCEPT of RENEWABLE ENERGY in TECHNOLOGY ASSISTED ENVIRONMENTS AND DESIGNING PROCESSES in THE DISTANCE EDUCATION MODEL

    Directory of Open Access Journals (Sweden)

    A. Seda YUCEL

    2007-01-01

    Full Text Available The energy policies of today focus mainly on sustainable energy systems and renewable energy resources. Chemistry is closely related to energy recycling, energy types, renewable energy, and nature-energy interaction; therefore, it is now an obligation to enrich chemistry classes with renewable energy concepts and related awareness. Before creating renewable energy awareness, the factors thought to affect such awareness should be determined. Knowing these factors would facilitate finding out what to take into account in creating renewable energy awareness. In this study, certain factors thought to affect the development of renewable energy awareness were investigated. The awareness was created through a technology-assisted renewable energy module and assessed using a renewable energy assessment tool. The effects of the students’ self-directed learning readiness with Guglielmino (1977, inner-individual orientation, and anxiety orientation on the awareness were examined. These three factors were found to have significant effects on renewable energy, which was developed through technology utilization. In addition, based on the finding that delivering the subject of renewable energy in technology assisted environments is more effective, the criteria that should be taken into consideration in transforming this subject into a design model that is more suitable for distance education were identified.

  9. Design Thinking in Elementary Students' Collaborative Lamp Designing Process

    Science.gov (United States)

    Kangas, Kaiju; Seitamaa-Hakkarainen, Pirita; Hakkarainen, Kai

    2013-01-01

    Design and Technology education is potentially a rich environment for successful learning, if the management of the whole design process is emphasised, and students' design thinking is promoted. The aim of the present study was to unfold the collaborative design process of one team of elementary students, in order to understand their multimodal…

  10. The order and priority of research and design method application within an assistive technology new product development process: a summative content analysis of 20 case studies.

    Science.gov (United States)

    Torrens, George Edward

    2018-01-01

    Summative content analysis was used to define methods and heuristics from each case study. The review process was in two parts: (1) A literature review to identify conventional research methods and (2) a summative content analysis of published case studies, based on the identified methods and heuristics to suggest an order and priority of where and when were used. Over 200 research and design methods and design heuristics were identified. From the review of the 20 case studies 42 were identified as being applied. The majority of methods and heuristics were applied in phase two, market choice. There appeared a disparity between the limited numbers of methods frequently used, under 10 within the 20 case studies, when hundreds were available. Implications for Rehabilitation The communication highlights a number of issues that have implication for those involved in assistive technology new product development: •The study defined over 200 well-established research and design methods and design heuristics that are available for use by those who specify and design assistive technology products, which provide a comprehensive reference list for practitioners in the field; •The review within the study suggests only a limited number of research and design methods are regularly used by industrial design focused assistive technology new product developers; and, •Debate is required within the practitioners working in this field to reflect on how a wider range of potentially more effective methods and heuristics may be incorporated into daily working practice.

  11. Strategic framework for education and training in Quality by Design (QbD) and process analytical technology (PAT).

    Science.gov (United States)

    de Matas, Marcel; De Beer, Thomas; Folestad, Staffan; Ketolainen, Jarkko; Lindén, Hans; Lopes, João Almeida; Oostra, Wim; Weimer, Marco; Öhrngren, Per; Rantanen, Jukka

    2016-07-30

    The regulatory and technical landscape of the pharmaceutical field is rapidly evolving from one focused predominantly on development of small molecules, using well established manufacturing technologies towards an environment in which biologicals and complex modalities are being developed using advanced science and technology coupled with the application of modern Quality by Design (QbD) principles. In order that Europe keeps pace with these changes and sustains its position as major player in the development and commercialization of medicines, it is essential that measures are put in place to maintain a highly skilled workforce. A number of challenges however exist to equipping academic, industrial and health agency staff with the requisite knowledge, skills and experience to develop the next generation of medicines. In this regard, the EUFEPS QbD and PAT Sciences Network has proposed a structured framework for education, training and continued professional development, which comprises a number of pillars covering the fundamental principles of modern pharmaceutical development including the underpinning aspects of science, engineering and technology innovation. The framework is not prescriptive and is not aimed at describing specific course content in detail. It should however be used as a point of reference for those institutions delivering pharmaceutical based educational courses, to ensure that the necessary skills, knowledge and experience for successful pharmaceutical development are maintained. A positive start has been made and a number of examples of formal higher education courses and short training programs containing elements of this framework have been described. The ultimate vision for this framework however, is to see widespread adoption and proliferation of this curriculum with it forming the backbone of QbD and PAT science based skills development. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. Contemporary design and manufacturing technology

    CERN Document Server

    Wang, Taiyong; Zuo, Dunwen

    2013-01-01

    The special topic volume communicates the latest progress and research results of new theory, new technology, method, equipment and so on in Engineering Technology, and to grasp the updated technological and research trends in internationally. The major topics covered by the special volumes include Advanced Materials and Manufacturing Technologies, Control, Automation and Detection Systems, Advanced Design Technology, Optimization and Modeling. In 80 invited and peer-reviewed papers, mechanical and other engineers describe their recent and current research and results in advanced materials and

  13. The Critical Design Process

    DEFF Research Database (Denmark)

    Brunsgaard, Camilla; Knudstrup, Mary-Ann; Heiselberg, Per

    2014-01-01

    . Data analysis showed that the majority of the consortiums worked in an integrated manner; though there was room for improvment. Additionally, the paper discusses the challanges of implementing the integrated design process in practice and suggests ways of overcomming some of the barriers . In doing so...

  14. Design and Performance Analysis of 1-Bit FinFET Full Adder Cells for Subthreshold Region at 16 nm Process Technology

    Directory of Open Access Journals (Sweden)

    ‘Aqilah binti Abdul Tahrim

    2015-01-01

    Full Text Available The scaling process of the conventional 2D-planar metal-oxide semiconductor field-effect transistor (MOSFET is now approaching its limit as technology has reached below 20 nm process technology. A new nonplanar device architecture called FinFET was invented to overcome the problem by allowing transistors to be scaled down into sub-20 nm region. In this work, the FinFET structure is implemented in 1-bit full adder transistors to investigate its performance and energy efficiency in the subthreshold region for cell designs of Complementary MOS (CMOS, Complementary Pass-Transistor Logic (CPL, Transmission Gate (TG, and Hybrid CMOS (HCMOS. The performance of 1-bit FinFET-based full adder in 16-nm technology is benchmarked against conventional MOSFET-based full adder. The Predictive Technology Model (PTM and Berkeley Shortchannel IGFET Model-Common Multi-Gate (BSIM-CMG 16 nm low power libraries are used. Propagation delay, average power dissipation, power-delay-product (PDP, and energy-delay-product (EDP are analysed based on all four types of full adder cell designs of both FETs. The 1-bit FinFET-based full adder shows a great reduction in all four metric performances. A reduction in propagation delay, PDP, and EDP is evident in the 1-bit FinFET-based full adder of CPL, giving the best overall performance due to its high-speed performance and good current driving capabilities.

  15. An Integrated Design Process

    DEFF Research Database (Denmark)

    Petersen, Mads Dines; Knudstrup, Mary-Ann

    2010-01-01

    Present paper is placed in the discussion about how sustainable measures are integrated in the design process by architectural offices. It presents results from interviews with four leading Danish architectural offices working with sustainable architecture and their experiences with it, as well...... as the requirements they meet in terms of how to approach the design process – especially focused on the early stages like a competition. The interviews focus on their experiences with working in multidisciplinary teams and using digital tools to support their work with sustainable issues. The interviews show...... that there is a difference in the experiences of the different offices. Architects taking an active part in the development of projects and tools in general have a better understanding of how to approach this. It is of course not surprising, because of a focused strategy towards this. However the most important thing...

  16. The potential of pyrolysis technology in climate change mitigation – influence of process design and –parameters, simulated in SuperPro Designer Software

    DEFF Research Database (Denmark)

    Thomsen, Tobias; Hauggaard-Nielsen, Henrik; Bruun, Esben

    This report investigates whether or not it would be possible to produce carbon-negative energy from pyrolysis of wheat straw in a series of Danish agricultural scenarios. A combination of process simulation in SuperPro Designer software, correlations derived from literature studies and experimental...... work, and overall balance calculations has been applied in the process. The study deviates from other studies of pyrolysis and biochar production by the inclusion of substitution energy impact on the overall carbon-balance. Substitution energy is integrated to account for the gap between the energy...

  17. [Signal Processing Suite Design

    Science.gov (United States)

    Sahr, John D.; Mir, Hasan; Morabito, Andrew; Grossman, Matthew

    2003-01-01

    Our role in this project was to participate in the design of the signal processing suite to analyze plasma density measurements on board a small constellation (3 or 4) satellites in Low Earth Orbit. As we are new to space craft experiments, one of the challenges was to simply gain understanding of the quantity of data which would flow from the satellites, and possibly to interact with the design teams in generating optimal sampling patterns. For example, as the fleet of satellites were intended to fly through the same volume of space (displaced slightly in time and space), the bulk plasma structure should be common among the spacecraft. Therefore, an optimal, limited bandwidth data downlink would take advantage of this commonality. Also, motivated by techniques in ionospheric radar, we hoped to investigate the possibility of employing aperiodic sampling in order to gain access to a wider spatial spectrum without suffering aliasing in k-space.

  18. Membrane processes in nuclear technologies

    International Nuclear Information System (INIS)

    Zakrzewska-Trznadel, G.

    2006-01-01

    The treatment of radioactive wastes is necessary taking into account the potential hazard of radioactive substances to human health and surrounding environment. The choice of appropriate technology depends on capital and operational costs, wastes amount and their characteristics, appointed targets of the process, e.g. the values of decontamination factors and volume reduction coefficients. The conventional technologies applied for radioactive waste processing, such as precipitation coupled with sedimentation, ion exchange and evaporation have many drawbacks. These include high energy consumption and formation of secondary wastes, e.g. the sludge from sediment tanks, spent ion exchange adsorbents and regeneration solutions. There are also many limitations of such processes, i.e. foaming and drop entrainment in evaporators, loses of solvents and production of secondary wastes in solvent extraction or bed clogging in ion exchange columns. Membrane processes as the newest achievement of the process engineering can successfully supersede many non-effective, out-of-date methods. But in some instances they can also complement these methods whilst improving the parameters of effluents and purification economy. This monograph presents own research data on the application of recent achievements in the area of membrane processes for solving selected problems in nuclear technology. Relatively big space was devoted to the use of membrane processing of low and intermediate radioactive liquid wastes because of numerous applications of these processes in nuclear centres over the world and also because of the interests of the author that was reflected by her recent research projects and activity. This work presents a review on the membrane methods recently introduced into the nuclear technology against the background of the other, commonly applied separation techniques, with indications of the possibilities and prospects for their further developments. Particular attention was paid

  19. Ionizing Radiation Processing Technology

    International Nuclear Information System (INIS)

    Rida Tajau; Kamarudin Hashim; Jamaliah Sharif; Ratnam, C.T.; Keong, C.C.

    2017-01-01

    This book completely brief on the basic concept and theory of ionizing radiation in polymers material processing. Besides of that the basic concept of polymerization addition, cross-linking and radiation degradation also highlighted in this informative book. All of the information is from scientific writing based on comprehensive scientific research in polymerization industry which using the radiation ionizing. It is very useful to other researcher whose study in Nuclear Sciencea and Science of Chemical and Material to use this book as a guideline for them in future scientific esearch.

  20. Optimization of processing technology of Rhizoma Pinelliae ...

    African Journals Online (AJOL)

    Methods: Orthogonal design method was applied to analyze the effects of factors such as licorice concentration volume, soaking time and processing temperature on processing technology of Rhizoma Pinelliae Praeparatum; MTT assay and flow cytometry were used to determine the inhibitory effect of Rhizoma Pinelliae ...

  1. Mastering Technologies in Design-Driven Innovation

    DEFF Research Database (Denmark)

    Dell'era, Claudio; Marchesi, Alessio; Verganti, Roberto

    2010-01-01

    and semantic dimensions of a product. Case studies of two leading Italian companies in the furniture industry--Kartell and Luceplan--illustrate two principal interpretations of the role of technology in radical design-driven innovation: technology as an enabler of new product meanings for the customer......Only a few companies have mastered the design-driven approach to innovation. This paper examines what it means to make design a central part of the business process, able to add value to products and create new markets. More specifically, it focuses on the interplay between the functional......, and the importance of supply networks that allow manufacturers to change product technologies quickly and experiment with new technologies....

  2. Mastering Technologies in Design-Driven Innovation

    DEFF Research Database (Denmark)

    Dell'era, Claudio; Marchesi, Alessio; Verganti, Roberto

    2010-01-01

    Only a few companies have mastered the design-driven approach to innovation. This paper examines what it means to make design a central part of the business process, able to add value to products and create new markets. More specifically, it focuses on the interplay between the functional and sem......, and the importance of supply networks that allow manufacturers to change product technologies quickly and experiment with new technologies....... and semantic dimensions of a product. Case studies of two leading Italian companies in the furniture industry--Kartell and Luceplan--illustrate two principal interpretations of the role of technology in radical design-driven innovation: technology as an enabler of new product meanings for the customer...

  3. Toward integrated design of waste management technologies

    International Nuclear Information System (INIS)

    Carnes, S.A.; Wolfe, A.K.

    1994-01-01

    Implementation of waste management technologies has been hindered by the intervention of diverse interests. Relying on a perceived history of inadequate and improper management, operations, and technological design, critics have stymied the implementation of scientifically and governmentally approved technologies and facilities, leading to a critical shortage of hazardous, mixed, and radioactive waste management capacity. The research and development (R ampersand D) required to identify technologies that are simultaneously (1) scientifically valid, (2) economically sound, and (3) publicly acceptable must necessarily address, in an integrated and interdisciplinary manner, these three criteria and how best to achieve the integration of stakeholders early in the technology implementation process (i.e., R ampersand D, demonstration, and commercialization). The goal of this paper is to initiate an identification of factors likely to render radioactive and hazardous waste management technologies publicly acceptable and to provide guidance on how technological R ampersand D might be revised to enhance the acceptability of alternative waste management technologies. Principal among these factors are the equitable distribution of costs, risks, and benefits of waste management policies and technologies, the equitable distribution of authority for making waste management policy and selecting technologies for implementation, and the equitable distribution of responsibility for resolving waste management problems. Stakeholder participation in assessing the likely distribution of these factors and mitigative mechanisms to enhance their equitable distribution, together with stakeholder participation in policy and technology R ampersand D, as informed by stakeholder assessments, should enhance the identification of acceptable policies and technologies

  4. Process Design Manual for Nitrogen Control.

    Science.gov (United States)

    Parker, Denny S.; And Others

    This manual presents theoretical and process design criteria for the implementation of nitrogen control technology in municipal wastewater treatment facilities. Design concepts are emphasized through examination of data from full-scale and pilot installations. Design data are included on biological nitrification and denitrification, breakpoint…

  5. Plasma technology in metallurgical processing

    Energy Technology Data Exchange (ETDEWEB)

    Haile, O.

    1995-12-31

    This literature work is mainly focusing on the mechanisms of plasma technology and telling about metallurgical processing, particularly iron and steelmaking as well as the advantage of the unique properties of plasma. The main advantages of plasma technology in metallurgical operations is to direct utilization of naturally available raw materials and fuels without costly upgrading andlor beneficiation, improved environmental impact, improve process control, significant amplification of reactor and process equipment utilization and increased efficiency of raw materials, energy and man power. This literature survey is based on the publication `plasma technology in metallurgical processing` presents a comprehensive account of the physical, electrical, and mechanical aspects of plasma production and practical processing. The applications of plasma technology in metallurgical processing are covered in depth with special emphasis on developments in promising early stages. Plasma technology of today is mature in the metallurgical process applications. A few dramatic improvements are expected in the near future this giving an impetus to the technologists for the long range planning. (18 refs.) (author)

  6. A review of the design and development processes of simulation for training in healthcare - A technology-centered versus a human-centered perspective.

    Science.gov (United States)

    Persson, Johanna

    2017-01-01

    This article reviews literature about simulation systems for training in healthcare regarding the prevalence of human-centered approaches in the design and development of these systems, motivated by a tradition in this field of working technology-centered. The results show that the focus on human needs and context of use is limited. It is argued that a reduction of the focus on technical advancements in favor of the needs of the users and the healthcare community, underpinned by human factors and ergonomics theory, is favorable. Due to the low number of identified articles describing or discussing human-centered approaches it is furthermore concluded that the publication culture promotes technical descriptions and summative evaluations rather than descriptions and reflections regarding the design and development processes. Shifting the focus from a technology-centered approach to a human-centered one can aid in the process of creating simulation systems for training in healthcare that are: 1) relevant to the learning objectives, 2) adapted to the needs of users, context and task, and 3) not selected based on technical or fidelity criteria. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Using New Technologies for Design, Modernization and Automation of Systems and Processes Related with Nuclear Applications. Technical Report of an Experts' Meeting

    International Nuclear Information System (INIS)

    2016-04-01

    In recent years the International Atomic Energy Agency has organized a series of technical cooperation projects aimed at expanding and strengthening the capacities of laboratories that work with nuclear instrumentation, as well as developing prototypes of instruments and interfaces which can respond to different needs in nuclear applications in the Latin America Caribbean (RLA) region. The introduction of advanced technologies for the design of instrumentation, interfaces and devices specialized and for work automation systems or processes related nuclear applications, has enabled to make better use of the available instrumentation. Repair work and modernization are an alternative to counter the lack of maintenance services by equipment suppliers that exceed the time life provided by manufacturers (planned obsolescence). Not only do specialized designs allow to solve specific needs, but often help reduce costs and the deadlines of work. An expert' meeting was held under the regional project RLA1011 (Support Automation Systems and Processes in Nuclear Facilities) to prepare a technical report that would provide recommendations to Member States of the IAEA on the current state of development several advanced technologies and their main fields of application, including examples of work in the region within the framework of this project. Eleven analytics entirely in Spanish from participating Member States are included in this publication

  8. Process Variations and Probabilistic Integrated Circuit Design

    CERN Document Server

    Haase, Joachim

    2012-01-01

    Uncertainty in key parameters within a chip and between different chips in the deep sub micron era plays a more and more important role. As a result, manufacturing process spreads need to be considered during the design process.  Quantitative methodology is needed to ensure faultless functionality, despite existing process variations within given bounds, during product development.   This book presents the technological, physical, and mathematical fundamentals for a design paradigm shift, from a deterministic process to a probability-orientated design process for microelectronic circuits.  Readers will learn to evaluate the different sources of variations in the design flow in order to establish different design variants, while applying appropriate methods and tools to evaluate and optimize their design.  Trains IC designers to recognize problems caused by parameter variations during manufacturing and to choose the best methods available to mitigate these issues during the design process; Offers both qual...

  9. Wafer level 3-D ICs process technology

    CERN Document Server

    Tan, Chuan Seng; Reif, L Rafael

    2009-01-01

    This book focuses on foundry-based process technology that enables the fabrication of 3-D ICs. The core of the book discusses the technology platform for pre-packaging wafer lever 3-D ICs. However, this book does not include a detailed discussion of 3-D ICs design and 3-D packaging. This is an edited book based on chapters contributed by various experts in the field of wafer-level 3-D ICs process technology. They are from academia, research labs and industry.

  10. NASA Collaborative Design Processes

    Science.gov (United States)

    Jones, Davey

    2017-01-01

    This is Block 1, the first evolution of the world's most powerful and versatile rocket, the Space Launch System, built to return humans to the area around the moon. Eventually, larger and even more powerful and capable configurations will take astronauts and cargo to Mars. On the sides of the rocket are the twin solid rocket boosters that provide more than 75 percent during liftoff and burn for about two minutes, after which they are jettisoned, lightening the load for the rest of the space flight. Four RS-25 main engines provide thrust for the first stage of the rocket. These are the world's most reliable rocket engines. The core stage is the main body of the rocket and houses the fuel for the RS-25 engines, liquid hydrogen and liquid oxygen, and the avionics, or "brain" of the rocket. The core stage is all new and being manufactured at NASA's "rocket factory," Michoud Assembly Facility near New Orleans. The Launch Vehicle Stage Adapter, or LVSA, connects the core stage to the Interim Cryogenic Propulsion Stage. The Interim Cryogenic Propulsion Stage, or ICPS, uses one RL-10 rocket engine and will propel the Orion spacecraft on its deep-space journey after first-stage separation. Finally, the Orion human-rated spacecraft sits atop the massive Saturn V-sized launch vehicle. Managed out of Johnson Space Center in Houston, Orion is the first spacecraft in history capable of taking humans to multiple destinations within deep space. 2) Each element of the SLS utilizes collaborative design processes to achieve the incredible goal of sending human into deep space. Early phases are focused on feasibility and requirements development. Later phases are focused on detailed design, testing, and operations. There are 4 basic phases typically found in each phase of development.

  11. Radiation processing technology in Malaysia

    International Nuclear Information System (INIS)

    Khairul Zaman Hj Mohd Dahlan

    2004-01-01

    Radiation processing technology is widely used in industry to enhance efficiency and productivity, improve product quality and competitiveness. Efforts have been made by MINT to expand the application of radiation processing technology for modification of indigenous materials such as natural rubber and rubber based products, palm oil and palm oil based products and polysaccharide into new and high value added products. This paper described MINT experiences on developing products through R and D from the laboratory to the pilot plant stage and commercialization. The paper also explained some issues and challenges that MINT encountered in the process of commercialization of its R and D results. (author)

  12. Participatory design of healthcare technology with children.

    Science.gov (United States)

    Sims, Tara

    2018-02-12

    Purpose There are many frameworks and methods for involving children in design research. Human-Computer Interaction provides rich methods for involving children when designing technologies. The paper aims to discuss these issues. Design/methodology/approach This paper examines various approaches to involving children in design, considering whether users view children as study objects or active participants. Findings The BRIDGE method is a sociocultural approach to product design that views children as active participants, enabling them to contribute to the design process as competent and resourceful partners. An example is provided, in which BRIDGE was successfully applied to developing upper limb prostheses with children. Originality/value Approaching design in this way can provide children with opportunities to develop social, academic and design skills and to develop autonomy.

  13. Designing Real Time Assistive Technologies

    DEFF Research Database (Denmark)

    Sonne, Tobias; Obel, Carsten; Grønbæk, Kaj

    2015-01-01

    Children with mental disorders like Attention Deficit Hyperactivity Disorder (ADHD) often experience challenges in school as they struggle to maintain their attention. Based on empirical studies conducted in school contexts and together with teachers and ADHD domain professionals, we identified...... design criteria in relation to three core components (sensing, recognizing, and assisting) for designing real time assistive technologies for children with ADHD. Based on these design criteria, we designed the Child Activity Sensing and Training Tool (CASTT), a real time assistive prototype that captures...... activities and assists the child in maintaining attention. From a preliminary evaluation of CASTT with 20 children in several schools, we and found that: 1) it is possible to create a wearable sensor system for children with ADHD that monitors physical and physiological activities in real time; and that 2...

  14. Designing and optimization of a micro CHP system based on Solid Oxide Fuel Cell with different fuel processing technologies

    DEFF Research Database (Denmark)

    Liso, Vincenzo; Nielsen, Mads Pagh; Kær, Søren Knudsen

    2009-01-01

    The development of fuel cell technologies offers the opportunity to achieve significant improvements in energy conversion efficiencies at many scales. The high operating temperature (700-1000 Celsius) of Solid Oxide Fuel Cells (SOFC) has a number of consequences, the most important of which...... are the possibility to partially reform hydrocarbon in the fuel cell anode compartment and the possibility to use high quality heat for cogeneration. In this work, different configurations of solid oxide fuel cell system for decentralized electricity production are examined. The Balance of Plant (BoP) components...... of the Micro Combined Heat and Power plant (mCHP) will be identified including fuel and air supply, fuel management anode re-circulation, exhaust gas heat management, power conditioning and control system. Using mass and energy balance, different types of fuel reforming including steam reforming...

  15. Open Source Radiation Hardened by Design Technology

    Science.gov (United States)

    Shuler, Robert

    2016-01-01

    The proposed technology allows use of the latest microcircuit technology with lowest power and fastest speed, with minimal delay and engineering costs, through new Radiation Hardened by Design (RHBD) techniques that do not require extensive process characterization, technique evaluation and re-design at each Moore's Law generation. The separation of critical node groups is explicitly parameterized so it can be increased as microcircuit technologies shrink. The technology will be open access to radiation tolerant circuit vendors. INNOVATION: This technology would enhance computation intensive applications such as autonomy, robotics, advanced sensor and tracking processes, as well as low power applications such as wireless sensor networks. OUTCOME / RESULTS: 1) Simulation analysis indicates feasibility. 2)Compact voting latch 65 nanometer test chip designed and submitted for fabrication -7/2016. INFUSION FOR SPACE / EARTH: This technology may be used in any digital integrated circuit in which a high level of resistance to Single Event Upsets is desired, and has the greatest benefit outside low earth orbit where cosmic rays are numerous.

  16. Ultrasonic horn design for ultrasonic machining technologies

    Directory of Open Access Journals (Sweden)

    Naď M.

    2010-07-01

    Full Text Available Many of industrial applications and production technologies are based on the application of ultrasound. In many cases, the phenomenon of ultrasound is also applied in technological processes of the machining of materials. The main element of equipments that use the effects of ultrasound for machining technology is the ultrasonic horn – so called sonotrode. The performance of ultrasonic equipment, respectively ultrasonic machining technologies depends on properly designed of sonotrode shape. The dynamical properties of different geometrical shapes of ultrasonic horns are presented in this paper. Dependence of fundamental modal properties (natural frequencies, mode shapes of various sonotrode shapes for various geometrical parameters is analyzed. Modal analyses of the models are determined by the numerical simulation using finite element method (FEM design procedures. The mutual comparisons of the comparable parameters of the various sonotrode shapes are presented.

  17. Development of a Model for Measuring Scientific Processing Skills Based on Brain-Imaging Technology: Focused on the Experimental Design Process

    Science.gov (United States)

    Lee, Il-Sun; Byeon, Jung-Ho; Kim, Young-shin; Kwon, Yong-Ju

    2014-01-01

    The purpose of this study was to develop a model for measuring experimental design ability based on functional magnetic resonance imaging (fMRI) during biological inquiry. More specifically, the researchers developed an experimental design task that measures experimental design ability. Using the developed experimental design task, they measured…

  18. Investigating the Design Process

    DEFF Research Database (Denmark)

    Kautz, Karlheinz

    2011-01-01

    Purpose – This paper aims to explore a case of customer and user participation in an agile software development project, which produced a tailor-made information system for workplace support as a step towards a theory of participatory design in agile software development. Design/methodology/appro......Purpose – This paper aims to explore a case of customer and user participation in an agile software development project, which produced a tailor-made information system for workplace support as a step towards a theory of participatory design in agile software development. Design...... design contributes to the successful completion of the investigated project. By drawing on innovation theory it was found that participatory design in agile development bears the characteristics of a successful organizational innovation. Grounding further explanations in complex adaptive systems theory...

  19. Fluidization technologies: Aerodynamic principles and process engineering.

    Science.gov (United States)

    Dixit, Rahul; Puthli, Shivanand

    2009-11-01

    The concept of fluidization has been adapted to different unit processes of pharmaceutical product development. Till date a lot of improvements have been made in the engineering design to achieve superior process performance. This review is focused on the fundamental principles of aerodynamics and hydrodynamics associated with the fluidization technologies. Fluid-bed coating, fluidized bed granulation, rotor processing, hot melt granulation, electrostatic coating, supercritical fluid based fluidized bed technology are highlighted. Developments in the design of processing equipments have been explicitly elucidated. This article also discusses processing problems from the operator's perspective along with latest developments in the application of these principles. (c) 2009 Wiley-Liss, Inc. and the American Pharmacists Association

  20. Design Patterns for Complex Event Processing

    OpenAIRE

    Paschke, Adrian

    2008-01-01

    Currently engineering efficient and successful event-driven applications based on the emerging Complex Event Processing (CEP) technology, is a laborious trial and error process. The proposed CEP design pattern approach should support CEP engineers in their design decisions to build robust and efficient CEP solutions with well understood tradeoffs and should enable an interdisciplinary and efficient communication process about successful CEP solutions in different application domains.

  1. Beam Technologies for Integrated Processing

    Science.gov (United States)

    1992-03-01

    magnetic media on tape to optical coatings on polymeric materials. The technologies have progressed in the area of PVD to plasma-assisted CVD ( PACVD ...evaporation of boric acid in an ammonia plasma. Enhanced CVD processes have taken the form of either thermally assisted CVD or PACVD for thermal and electron...temperature-induced irreversible structural or electrical changes. A further process improvement, known as remote PACVD , is used to protect both the

  2. Distillation process using microchannel technology

    Science.gov (United States)

    Tonkovich, Anna Lee [Dublin, OH; Simmons, Wayne W [Dublin, OH; Silva, Laura J [Dublin, OH; Qiu, Dongming [Carbondale, IL; Perry, Steven T [Galloway, OH; Yuschak, Thomas [Dublin, OH; Hickey, Thomas P [Dublin, OH; Arora, Ravi [Dublin, OH; Smith, Amanda [Galloway, OH; Litt, Robert Dwayne [Westerville, OH; Neagle, Paul [Westerville, OH

    2009-11-03

    The disclosed invention relates to a distillation process for separating two or more components having different volatilities from a liquid mixture containing the components. The process employs microchannel technology for effecting the distillation and is particularly suitable for conducting difficult separations, such as the separation of ethane from ethylene, wherein the individual components are characterized by having volatilities that are very close to one another.

  3. Pyro processing technology at KAERI

    International Nuclear Information System (INIS)

    Lee, Hansoo; Kim, Eungho; Park, Seongwon

    2008-01-01

    KAERI has studied on the pyro processing as a spent fuel treatment method for more than decade. The process includes voloxidation, electroreduction, electrorefining with solid and liquid cathodes, and waste salt treatment. Each process has developed its own characteristics which are suitable for treating high mass flow. In the electroreduction process, a magnesia filter was used for integrated electrolytic reduction. More than 99% of reduction yield was achieved. Electrorefining process employs the continuous operation concept. Uranium deposits on the surface of graphite cathode and it is stripped off spontaneously to the bottom of the reactor, which allows continuous operation. Crystallization method was used for treating waste salt. Pure salt is recovered by Czochralski method or zone freezing method and subsequently recycled to the reactor. These advanced technologies ensure the operation of pyro processing in a larger scale

  4. Decoding designers' inspiration process

    NARCIS (Netherlands)

    Gonçalves, M.

    2016-01-01

    Every great invention, innovative design or visionary art piece ever created started in the same way: with a blank canvas. However, you never begin a new project with a completely clean slate: besides memories, past experiences and general knowledge, all of us are constantly surrounded by

  5. Technology development life cycle processes.

    Energy Technology Data Exchange (ETDEWEB)

    Beck, David Franklin

    2013-05-01

    This report and set of appendices are a collection of memoranda originally drafted in 2009 for the purpose of providing motivation and the necessary background material to support the definition and integration of engineering and management processes related to technology development. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. As presented herein, the material begins with a survey of open literature perspectives on technology development life cycles, including published data on %E2%80%9Cwhat went wrong.%E2%80%9D The main thrust of the material presents a rational expose%CC%81 of a structured technology development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of the systems engineering process. The material concludes with a discussion on the use of multiple measures to assess technology maturity, including consideration of the viewpoint of potential users.

  6. Mental Health Technologies: Designing With Consumers.

    Science.gov (United States)

    Orlowski, Simone; Matthews, Ben; Bidargaddi, Niranjan; Jones, Gabrielle; Lawn, Sharon; Venning, Anthony; Collin, Philippa

    2016-01-28

    Despite growing interest in the promise of e-mental and well-being interventions, little supporting literature exists to guide their design and the evaluation of their effectiveness. Both participatory design (PD) and design thinking (DT) have emerged as approaches that hold significant potential for supporting design in this space. Each approach is difficult to definitively circumscribe, and as such has been enacted as a process, a mind-set, specific practices/techniques, or a combination thereof. At its core, however, PD is a design research tradition that emphasizes egalitarian partnerships with end users. In contrast, DT is in the process of becoming a management concept tied to innovation with strong roots in business and education. From a health researcher viewpoint, while PD can be reduced to a number of replicable stages that involve particular methods, techniques, and outputs, projects often take vastly different forms and effective PD projects and practice have traditionally required technology-specific (eg, computer science) and domain-specific (eg, an application domain, such as patient support services) knowledge. In contrast, DT offers a practical off-the-shelf toolkit of approaches that at face value have more potential to have a quick impact and be successfully applied by novice practitioners (and those looking to include a more human-centered focus in their work). Via 2 case studies we explore the continuum of similarities and differences between PD and DT in order to provide an initial recommendation for what health researchers might reasonably expect from each in terms of process and outcome in the design of e-mental health interventions. We suggest that the sensibilities that DT shares with PD (ie, deep engagement and collaboration with end users and an inclusive and multidisciplinary practice) are precisely the aspects of DT that must be emphasized in any application to mental health provision and that any technology development process must

  7. Business process modeling for processing classified documents using RFID technology

    Directory of Open Access Journals (Sweden)

    Koszela Jarosław

    2016-01-01

    Full Text Available The article outlines the application of the processing approach to the functional description of the designed IT system supporting the operations of the secret office, which processes classified documents. The article describes the application of the method of incremental modeling of business processes according to the BPMN model to the description of the processes currently implemented (“as is” in a manual manner and target processes (“to be”, using the RFID technology for the purpose of their automation. Additionally, the examples of applying the method of structural and dynamic analysis of the processes (process simulation to verify their correctness and efficiency were presented. The extension of the process analysis method is a possibility of applying the warehouse of processes and process mining methods.

  8. Design automation of the two-layered steels welding technology

    International Nuclear Information System (INIS)

    Strel'tsov, A.I.

    2000-01-01

    Approach to the design process modeling of two-layered steels welding technology is presented. The area calculation formulas for main, transitive and cladding weld layers are derived. Realization methods of main tasks solved at design of technological processes for two-layered steels welding are described [ru

  9. Manufacturing technology and process for BWR fuel

    International Nuclear Information System (INIS)

    Kato, Shigeru

    1996-01-01

    Following recent advanced technologies, processes and requests of the design changes of BWR fuel, Nuclear Fuel Industries, Ltd. (NFI) has upgraded the manufacturing technology and honed its own skills to complete its brand-new automated facility in Tokai in the latter half of 1980's. The plant uses various forms of automation throughout the manufacturing process: the acceptance of uranium dioxide powder, pelletizing, fuel rod assembling, fuel bundle assembling and shipment. All processes are well computerized and linked together to establish the integrated control system with three levels of Production and Quality Control, Process Control and Process Automation. This multi-level system plays an important role in the quality assurance system which generates the highest quality of fuels and other benefits. (author)

  10. Some Big Questions about Design in Educational Technology

    Science.gov (United States)

    Gibbons, Andrew S.

    2016-01-01

    This article asks five questions that lead us to the foundations of design practice in educational technology. Design processes structure time, space, place, activity, role, goal, and resource. For educational technology to advance in its understanding of design practice, it must question whether we have clear conceptions of how abstract…

  11. Waste processing building with incineration technology

    Science.gov (United States)

    Wasilah, Wasilah; Zaldi Suradin, Muh.

    2017-12-01

    In Indonesia, waste problem is one of major problem of the society in the city as part of their life dynamics. Based on Regional Medium Term Development Plan of South Sulawesi Province in 2013-2018, total volume and waste production from Makassar City, Maros, Gowa, and Takalar Regency estimates the garbage dump level 9,076.949 m3/person/day. Additionally, aim of this design is to present a recommendation on waste processing facility design that would accommodate waste processing process activity by incineration technology and supported by supporting activity such as place of education and research on waste, and the administration activity on waste processing facility. Implementation of incineration technology would reduce waste volume up to 90% followed by relative negative impact possibility. The result planning is in form of landscape layout that inspired from the observation analysis of satellite image line pattern of planning site and then created as a building site pattern. Consideration of building orientation conducted by wind analysis process and sun path by auto desk project Vasari software. The footprint designed by separate circulation system between waste management facility interest and the social visiting activity in order to minimize the croos and thus bring convenient to the building user. Building mass designed by inseparable connection series system, from the main building that located in the Northward, then connected to a centre visitor area lengthways, and walked to the waste processing area into the residue area in the Southward area.

  12. Design and Evaluation of Topical Diclofenac Sodium Gel Using Hot Melt Extrusion Technology as a Continuous Manufacturing Process with Kolliphor® P407.

    Science.gov (United States)

    Pawar, Jaywant; Narkhede, Rajkiran; Amin, Purnima; Tawde, Vaishali

    2017-08-01

    The aim of the present context was to develop and evaluate a Kolliphor® P407-based transdermal gel formulation of diclofenac sodium by hot melt extrusion (HME) technology; central composite design was used to optimize the formulation process. In this study, we have explored first time ever HME as an industrially feasible and continuous manufacturing technology for the manufacturing of gel formulation using Kolliphor® P407 and Kollisolv® PEG400 as a gel base. Diclofenac sodium was used as a model drug. The HME parameters such as feeding rate, screw speed, and barrel temperature were crucial for the semisolid product development, and were optimized after preliminary trials. For the processing of the gel formulation by HME, a modified screw design was used to obtain a uniform product. The obtained product was evaluated for physicochemical characterization such as differential scanning calorimetry (DSC), X-ray diffraction (XRD), pH measurement, rheology, surface tension, and texture profile analysis. Moreover, it was analyzed for general appearance, spreadibility, surface morphology, and drug content. The optimized gel formulation showed homogeneity and transparent film when applied on a glass slide under microscope, pH was 7.02 and uniform drug content of 100.04 ± 2.74 (SD = 3). The DSC and XRD analysis of the HME gel formulation showed complete melting of crystalline API into an amorphous form. The Kolliphor® P407 and Kollisolv® PEG400 formed excellent gel formulation using HME with consistent viscoelastic properties of the product. An improved drug release was found for the HME gel, which showed a 100% drug release than that of a marketed product which showed only 88% of drug release at the end of 12 h. The Flux value of the HME gel was 106 than that of a marketed formulation, which showed only about 60 value, inferring a significant difference (P < 0.05) at the end of 1 h. This study demonstrates a novel application of the hot melt extrusion

  13. Engineering design: A cognitive process approach

    Science.gov (United States)

    Strimel, Greg Joseph

    The intent of this dissertation was to identify the cognitive processes used by advanced pre-engineering students to solve complex engineering design problems. Students in technology and engineering education classrooms are often taught to use an ideal engineering design process that has been generated mostly by educators and curriculum developers. However, the review of literature showed that it is unclear as to how advanced pre-engineering students cognitively navigate solving a complex and multifaceted problem from beginning to end. Additionally, it was unclear how a student thinks and acts throughout their design process and how this affects the viability of their solution. Therefore, Research Objective 1 was to identify the fundamental cognitive processes students use to design, construct, and evaluate operational solutions to engineering design problems. Research Objective 2 was to determine identifiers within student cognitive processes for monitoring aptitude to successfully design, construct, and evaluate technological solutions. Lastly, Research Objective 3 was to create a conceptual technological and engineering problem-solving model integrating student cognitive processes for the improved development of problem-solving abilities. The methodology of this study included multiple forms of data collection. The participants were first given a survey to determine their prior experience with engineering and to provide a description of the subjects being studied. The participants were then presented an engineering design challenge to solve individually. While they completed the challenge, the participants verbalized their thoughts using an established "think aloud" method. These verbalizations were captured along with participant observational recordings using point-of-view camera technology. Additionally, the participant design journals, design artifacts, solution effectiveness data, and teacher evaluations were collected for analysis to help achieve the

  14. Materials in Participatory Design Processes

    DEFF Research Database (Denmark)

    Hansen, Nicolai Brodersen

    This dissertation presents three years of academic inquiry into the question of what role materials play in interaction design and participatory design processes. The dissertation aims at developing conceptual tools, based on Deweys pragmatism, for understanding how materials aid design reflection....... It has been developed using a research-through-design approach in which the author has conducted practical design work in order to investigate and experiment with using materials to scaffold design inquiry. The results of the PhD work is submitted as seven separate papers, submitted to esteemed journals...... and conferences within the field of interaction design and HCI. The work is motivated both by the growing interest in materials in interaction design and HCI and the interest in design processes and collaboration within those fields. At the core of the dissertation lies an interest in the many different materials...

  15. Teaching Design of Emerging Embodied Technologies

    DEFF Research Database (Denmark)

    Majgaard, Gunver

    2014-01-01

    How does design of emerging embodied technologies enrich the HCI learning processes? We introduce a model for embodied interaction and use it in the development of a painting app for children, based on the motion sensor Asus Xtion Pro (similar to Kinect). The development of the app was part...... of a HCI course for engineering students. The motion sensor was interesting as a design tool, because it appealed to full body interaction. The development exemplified and unfolded the embodied elements: Multiple modalities, physical, bodily, social, and symbolic interaction in a situated environment....... Subsequently, we introduce a physical-digital toolbox, illustrating the span of parameters within the model for embodied interaction: Robot Technology, Tangibles, Wearables, Interactive Surroundings, and Bigger Objects....

  16. Technologies to support industrial processes

    International Nuclear Information System (INIS)

    Palazzi, G.; Savelli, D.

    1989-05-01

    Control and measuring techniques applied to industry have the common aim of increasing safety, reliability and plant availability. The industrial monitoring system needs a lot of sensors, whose signals, elaborated and interpreted, allow one to define the best working condition; moreover control instruments perform a diagnosis related to damages and breakages. The Experimental Engineering Division of ENEA's Thermal Reactor Department has developed sensors and measuring apparatus and has acquired advanced control techniques. All these systems, containing an original software, have been applied to industrial process problems and/or to experimental facilities both to increase reliability and to understand better process physics. Division activities are grouped in four sectors: non-destructive examinations (ultrasonic, eddy current, thermography, holographic interpherometry, penetrant liquids and magnetoscopy); innovative sensors (heated thermocouples, optical fiber sensors); advanced measuring systems (laser technology for fluidodynamic measures, nuclear radiation techniques, infrared measuring, mass spectrometer, hot-film anemometer, chromatographic apparatus); advanced technologies for diagnosis and signal analysis (digital image processing, statistical analysis). (author)

  17. Analog circuit design designing waveform processing circuits

    CERN Document Server

    Feucht, Dennis

    2010-01-01

    The fourth volume in the set Designing Waveform-Processing Circuits builds on the previous 3 volumes and presents a variety of analog non-amplifier circuits, including voltage references, current sources, filters, hysteresis switches and oscilloscope trigger and sweep circuitry, function generation, absolute-value circuits, and peak detectors.

  18. Emerging memory technologies design, architecture, and applications

    CERN Document Server

    2014-01-01

    This book explores the design implications of emerging, non-volatile memory (NVM) technologies on future computer memory hierarchy architecture designs. Since NVM technologies combine the speed of SRAM, the density of DRAM, and the non-volatility of Flash memory, they are very attractive as the basis for future universal memories. This book provides a holistic perspective on the topic, covering modeling, design, architecture and applications. The practical information included in this book will enable designers to exploit emerging memory technologies to improve significantly the performance/power/reliability of future, mainstream integrated circuits. • Provides a comprehensive reference on designing modern circuits with emerging, non-volatile memory technologies, such as MRAM and PCRAM; • Explores new design opportunities offered by emerging memory technologies, from a holistic perspective; • Describes topics in technology, modeling, architecture and applications; • Enables circuit designers to ex...

  19. Design4Society: morality and technology revisited

    NARCIS (Netherlands)

    Verbeek, Peter P.C.C.

    2015-01-01

    The moral significance of technology has become a central theme in the ethics of technology: rather than being ethically neutral, technologies have an inherent moral dimension. How can designers deal with this moral dimension of the technologies they are developing? From the perspective of

  20. M-Learning Systems Design--Technology and Pedagogy Aspects

    Science.gov (United States)

    Gourova, Elissaveta; Asenova, Asya; Dulev, Pavlin

    2013-01-01

    Technology developments face universities with many challenges--to integrate technologies in educational processes, design new electronic materials, change teaching styles, and better meet the demands of the technology-savvy generation. The paper considers problems of m-learning adoption in Bulgaria at one Faculty of the Technical…

  1. THE PRODUCT DESIGN PROCESS USING STYLISTIC SURFACES

    Directory of Open Access Journals (Sweden)

    Arkadiusz Gita

    2017-06-01

    Full Text Available The increasing consumer requirements for the way what everyday use products look like, forces manufacturers to put more emphasis on product design. Constructors, apart from the functional aspects of the parts created, are forced to pay attention to the aesthetic aspects. Software for designing A-class surfaces is very helpful in this case. Extensive quality analysis modules facilitate the work and allow getting models with specific visual features. The authors present a design process of the product using stylistic surfaces based on the front panel of the moped casing. In addition, methods of analysis of the design surface and product technology are presented.

  2. Application of three-dimensional computerised tomography reconstruction and image processing technology in individual operation design of developmental dysplasia of the hip patients.

    Science.gov (United States)

    Xuyi, Wang; Jianping, Peng; Junfeng, Zhu; Chao, Shen; Yimin, Cui; Xiaodong, Chen

    2016-02-01

    Acetabular coverage deficiency displays individual difference among patients with developmental dysplasia of the hip (DDH). Therefore, the correct direction and degree of the acetabular fragment is patient-specific during Bernese periacetabular osteotomy (PAO). This paper introduces a feasible method using 3D computed tomography (CT) and computer image processing technology for customised surgical planning. CT data of 96 hips in 60 DDH patients (male 15, female 45; average age/range 30 ± 8/14-49 years) and 53 normal hips (male 13, female 37; average age/range 52 ± 13/16-69 years) were reconstructed using commercially available software Mimics and Imageware. Geometric parameters of each hip were measured in relation to the anterior pelvic plane after correcting for pelvic tilt and rotation. Deficiency types and degrees of acetabular dysplasia in patients with DDH were determined by comparison with normal hips, and improvement in femoral-head coverage was analysed again after virtual PAO. A customised surgery programme for each DDH patient was designed and provided the reference for the actual operation. We produced a 3D pelvic model using image processing software, doing precise measurement and with close approximation to the actual PAO. Lateral centre-edge angle (LCEA), anterior centre-edge angle (ACEA), acetabular anteversion angle (AAVA), anterior acetabular sector angle (AASA) and posterior acetabular sector angle (PASA) of normal hips in the control group were 35.128 ± 6.337, 57.052 ± 6.853, 19.215 ± 5.504, 61.537 ± 7.291 and 99.434 ± 8.372°, respectively. Angles of hips with DDH before surgery were 11.46 ± 11.19, 35.79 ± 13.75, 22.77 ± 6.13, 43.58 ± 9.15 and 88.46 ± 8.24, which were corrected to 33.81 ± 2.36, 55.38 ± 2.09, 20.16 ± 2.18, 58.29 ± 7.60, and 4.71 ± 7.75°, respectively, after surgery. After virtual Bernese PAO, LCEA, ACEA, AAVA, AASA and PASA were corrected

  3. European consumers' acceptance of beef processing technologies

    DEFF Research Database (Denmark)

    de Barcellos, Marcia Dutra; Kügler, Jens Oliver; Grunert, Klaus G.

    2010-01-01

    ' beef were considered negative outcomes of technological innovations. Beef processing technologies were predominantly perceived as valuable options for convenience shoppers and less demanding consumers. Overall, respondents supported the development of 'non-invasive' technologies that were able...

  4. The Integrated Design Process (IDP)

    DEFF Research Database (Denmark)

    Hansen, Hanne Tine Ring; Knudstrup, Mary-Ann

    2005-01-01

    Summary: This paper presents the Integrated Design Process (IDP) applied to sustainable architecture and available design methods and gives an example of the tools applied. The paper focuses upon the ability to integrate knowledge from engineering and architecture and let them interact with each...... different tools related to the IDP can interact in order to enable sustainability to become a natural part of any building project. The virtual design project gives an example of how a selection of parameters can be weighted and used in a sketching project. The paper thereby discusses an example of how...... other in order to solve the often very complicated problems connected to the design of sustainable buildings. Some of the aspects of the integrated design process were tested on a virtual design project in order to evaluate if the IDP can help achieve sustainable architecture. The aim was to show how...

  5. Integrating ergonomic knowledge into engineering design processes

    DEFF Research Database (Denmark)

    Hall-Andersen, Lene Bjerg

    to the ergonomic ambitions of the clients. The ergonomists’ ability to navigate, act strategically, and compromise on ergonomic inputs is also important in relation to having an impact in the engineering design processes. Familiarity with the engineering design terminology and the setup of design projects seems...... on learning and knowledge management and theoretical concepts of objects derived from Science and Technology Studies. This combination of theoretical perspectives is new with this area. In the engineering consultancy setting the proximity, which arose from the ergonomists and engineering designers being...... employed in the same company, constituted a supporting factor for the possibilities to integrate ergonomic knowledge into the engineering design processes. However, the integration activities remained discrete and only happened in some of the design projects. A major barrier was related to the business...

  6. Process design (exterior – interior design)

    OpenAIRE

    Sandeva, Vaska; Despot, Katerina

    2013-01-01

    The design is a complex process of spatial organization and creative problem object. It switched to the study of complex natural conditions (analysis and evaluation) and the development of compositional solution structure of the object. Construction and shaping of all buildings whether it is exterior or interior, be it street, Square apartment building, park or greater forest massif, public facility (administrative buildings, hospitals, schools, galleries etc.), residential object (garsion...

  7. Design of object processing systems

    NARCIS (Netherlands)

    Grigoras, D.R.; Hoede, C.

    Object processing systems are met rather often in every day life, in industry, tourism, commerce, etc. When designing such a system, many problems can be posed and considered, depending on the scope and purpose of design. We give here a general approach which involves graph theory, and which can

  8. Commercial Parts Technology Qualification Processes

    Science.gov (United States)

    Cooper, Mark S.

    2013-01-01

    Many high-reliability systems, including space systems, use selected commercial parts (including Plastic Encapsulated Microelectronics or PEMs) for unique functionality, small size, low weight, high mechanical shock resistance, and other factors. Predominantly this usage is subjected to certain 100% tests (typically called screens) and certain destructive tests usually (but not always) performed on the flight lot (typically called qualification tests). Frequently used approaches include those documented in EEE-INST-002 and JPL DocID62212 (which are sometimes modified by the particular aerospace space systems manufacturer). In this study, approaches from these documents and several space systems manufacturers are compared to approaches from a launch systems manufacturer (SpaceX), an implantable medical electronics manufacturer (Medtronics), and a high-reliability transport system process (automotive systems). In the conclusions section, these processes are outlined for all of these cases and presented in tabular form. Then some simple comparisons are made. In this introduction section, the PEM technology qualification process is described, as documented in EEE-INST-002 (written by the Goddard Space Flight Center, GSFC), as well as the somewhat modified approach employed at the Jet Propulsion Laboratory (JPL). Approaches used at several major NASA contractors are also described

  9. Wind turbine technology principles and design

    CERN Document Server

    Adaramola, Muyiwa

    2014-01-01

    IntroductionPart I: AerodynamicsWind Turbine Blade Design; Peter J. Schubel and Richard J. CrossleyA Shrouded Wind Turbine Generating High Output Power with Wind-Lens Technology; Yuji Ohya and Takashi KarasudaniEcomoulding of Composite Wind Turbine Blades Using Green Manufacturing RTM Process; Brahim AttafAerodynamic Shape Optimization of a Vertical-Axis Wind Turbine Using Differential Evolution; Travis J. Carrigan, Brian H. Dennis, Zhen X. Han, and Bo P. WangPart II: Generators and Gear Systems

  10. Improving drug manufacturing with process analytical technology.

    Science.gov (United States)

    Rodrigues, Licinia O; Alves, Teresa P; Cardoso, Joaquim P; Menezes, José C

    2006-01-01

    Within the process analytical technology (PAT) framework, as presented in the US Food and Drug Administration guidelines, the aim is to design, develop and operate processes consistently to ensure a pre-defined level of quality at the end of the manufacturing process. Three PAT implementation scenarios can be envisaged. Firstly, PAT could be used in its most modest version (in an almost non-PAT manner) to simply replace an existing quality control protocol (eg, using near-infrared spectroscopy for an in-process quality control, such as moisture content). Secondly, the use of in-process monitoring and process analysis could be integrated to enhance process understanding and operation for an existing industrial process. Thirdly, PAT could be used extensively and exclusively throughout development, scale-up and full-scale production of a new product and process. Although the first type of implementations are well known, reports of the second and third types remain scarce. Herein, results obtained from PAT implementations of the second and third types are described for two industrial processes for preparing bulk active pharmaceutical ingredients, demonstrating the benefits in terms of increased process understanding and process control.

  11. Design of plutonium processing facilities

    International Nuclear Information System (INIS)

    Derbyshire, W.; Sills, R.J.

    1982-01-01

    Five considerations for the design of plutonium processing facilities are identified. These are: Toxicity, Radiation, Criticality, Containment and Remote Operation. They are examined with reference to reprocessing spent nuclear fuel and application is detailed both for liquid and dry processes. (author)

  12. Management of Technology - a political process approach

    DEFF Research Database (Denmark)

    Koch, Christian

    1999-01-01

    Most management of technology writings fail to address enterprise developments as political processes, where visions, coalitions and emergence are central features. The paper report of a participants observation study of management of technology processes.......Most management of technology writings fail to address enterprise developments as political processes, where visions, coalitions and emergence are central features. The paper report of a participants observation study of management of technology processes....

  13. Design of environmentally benign processes

    DEFF Research Database (Denmark)

    Hostrup, Martin; Harper, Peter Mathias; Gani, Rafiqul

    1999-01-01

    This paper presents a hybrid method for design of environmentally benign processes. The hybrid method integrates mathematical modelling with heuristic approaches to solving the optimisation problems related to separation process synthesis and solvent design and selection. A structured method...... of solution, which employs thermodynamic insights to reduce the complexity and size of the mathematical problem by eliminating redundant alternatives, has been developed for the hybrid method. Separation process synthesis and design problems related to the removal of a chemical species from process streams...... because of environmental constraints are particularly suited for solution with the hybrid method. Application of the hybrid method is highlighted through two illustrative examples. The first example involves the determination of an optimal flowsheet for the removal of a chemical species from an azeotropic...

  14. Mill Designed Bio bleaching Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Institute of Paper Science Technology

    2004-01-30

    generation of laccase has a broad spectrum of operating parameters. Nonetheless, the development of future genetically engineered laccases with enhanced temperature, pH and redox potentials will dramatically improve the overall process. A second challenge for LMS bleaching technologies is the need to develop effective, catalytic mediators. From the literature we already know this is feasible since ABTS and some inorganic mediators are catalytic. Unfortunately, the mediators that exhibit catalytic properties do not exhibit significant delignification properties and this is a challenge for future research studies. Potential short-term mill application of laccase has been recently reported by Felby132 and Chandra133 as they have demonstrated that the physical properties of linerboard can be improved when exposed to laccase without a chemical mediator. In addition, xxx has shown that the addition of laccase to the whitewater of the paper machine has several benefits for the removal of colloidal materials. Finally, this research program has presented important features on the delignification chemistry of LMS{sub NHA} and LMS{sub VA} that, in the opinion of the author, are momentous contributions to the overall LMS chemistry/biochemistry knowledge base which will continue to have future benefits.

  15. An Assistive Technology Design Framework for ADHD

    DEFF Research Database (Denmark)

    Sonne, Tobias; Marshall, Paul; Obel, Carsten

    2016-01-01

    In this paper, we present a design framework for ADHD assistive technologies that aims to give researchers grounding in the background research on the condition, to provide a lingua franca, and to highlight potential research directions for HCI researchers within assistive technology. The design...... framework couples ADHD patient challenge areas to technological opportunities and it provides a set of practical design strategies for developing successful assistive technologies for people with ADHD. The framework is based on empirical studies, ADHD research, and related work on assistive technologies. We...... map existing assistive technologies and potential new research efforts to the framework concepts. This way we show how it is used to support and advance the research and development of novel assistive technologies for the ADHD domain....

  16. Human Integration Design Processes (HIDP)

    Science.gov (United States)

    Boyer, Jennifer

    2014-01-01

    The purpose of the Human Integration Design Processes (HIDP) document is to provide human-systems integration design processes, including methodologies and best practices that NASA has used to meet human systems and human rating requirements for developing crewed spacecraft. HIDP content is framed around human-centered design methodologies and processes in support of human-system integration requirements and human rating. NASA-STD-3001, Space Flight Human-System Standard, is a two-volume set of National Aeronautics and Space Administration (NASA) Agency-level standards established by the Office of the Chief Health and Medical Officer, directed at minimizing health and performance risks for flight crews in human space flight programs. Volume 1 of NASA-STD-3001, Crew Health, sets standards for fitness for duty, space flight permissible exposure limits, permissible outcome limits, levels of medical care, medical diagnosis, intervention, treatment and care, and countermeasures. Volume 2 of NASASTD- 3001, Human Factors, Habitability, and Environmental Health, focuses on human physical and cognitive capabilities and limitations and defines standards for spacecraft (including orbiters, habitats, and suits), internal environments, facilities, payloads, and related equipment, hardware, and software with which the crew interfaces during space operations. The NASA Procedural Requirements (NPR) 8705.2B, Human-Rating Requirements for Space Systems, specifies the Agency's human-rating processes, procedures, and requirements. The HIDP was written to share NASA's knowledge of processes directed toward achieving human certification of a spacecraft through implementation of human-systems integration requirements. Although the HIDP speaks directly to implementation of NASA-STD-3001 and NPR 8705.2B requirements, the human-centered design, evaluation, and design processes described in this document can be applied to any set of human-systems requirements and are independent of reference

  17. Radio design in nanometer technologies

    CERN Document Server

    Ismail, Mohammed

    2006-01-01

    This is the first volume that looks at the integrated radio design problem as a "piece of a big puzzle" Most books discuss more on communications or more on hardware but not both, this book strikes the right balance between the two and provides the reader with a holistic view of the subject of radio design: current and future trends.

  18. Designing Interactive Technology for Teens

    DEFF Research Database (Denmark)

    Read, Janet; Iversen, Ole Sejer; Horton, Matthew

    2012-01-01

    This half-day workshop builds upon previous work by the authors in understanding and designing for teenagers where the initial concern was to understand cool. Expanding out from this work, the workshop proposers now seek to better understand all the activities around designing for teenagers – the...

  19. The Personal Health Technology Design Space

    DEFF Research Database (Denmark)

    Bardram, Jakob Eyvind; Frost, Mads

    2016-01-01

    . To enable designers to make informed and well-articulated design decision, the authors propose a design space for personal health technologies. This space consists of 10 dimensions related to the design of data sampling strategies, visualization and feedback approaches, treatment models, and regulatory......Interest is increasing in personal health technologies that utilize mobile platforms for improved health and well-being. However, although a wide variety of these systems exist, each is designed quite differently and materializes many different and more or less explicit design assumptions...

  20. Buried waste integrated demonstration technology integration process

    International Nuclear Information System (INIS)

    Ferguson, J.S.; Ferguson, J.E.

    1992-04-01

    A Technology integration Process was developed for the Idaho National Energy Laboratories (INEL) Buried Waste Integrated Demonstration (BWID) Program to facilitate the transfer of technology and knowledge from industry, universities, and other Federal agencies into the BWID; to successfully transfer demonstrated technology and knowledge from the BWID to industry, universities, and other Federal agencies; and to share demonstrated technologies and knowledge between Integrated Demonstrations and other Department of Energy (DOE) spread throughout the DOE Complex. This document also details specific methods and tools for integrating and transferring technologies into or out of the BWID program. The document provides background on the BWID program and technology development needs, demonstrates the direction of technology transfer, illustrates current processes for this transfer, and lists points of contact for prospective participants in the BWID technology transfer efforts. The Technology Integration Process was prepared to ensure compliance with the requirements of DOE's Office of Technology Development (OTD)

  1. Laser Processed Condensing Heat Exchanger Technology Development

    Science.gov (United States)

    Hansen, Scott; Wright, Sarah; Wallace, Sarah; Hamilton, Tanner; Dennis, Alexander; Zuhlke, Craig; Roth, Nick; Sanders, John

    2017-01-01

    The reliance on non-permanent coatings in Condensing Heat Exchanger (CHX) designs is a significant technical issue to be solved before long-duration spaceflight can occur. Therefore, high reliability CHXs have been identified by the Evolvable Mars Campaign (EMC) as critical technologies needed to move beyond low earth orbit. The Laser Processed Condensing Heat Exchanger project aims to solve these problems through the use of femtosecond laser processed surfaces, which have unique wetting properties and potentially exhibit anti-microbial growth properties. These surfaces were investigated to identify if they would be suitable candidates for a replacement CHX surface. Among the areas researched in this project include microbial growth testing, siloxane flow testing in which laser processed surfaces were exposed to siloxanes in an air stream, and manufacturability.

  2. The Search for New Information Processing technologies

    Science.gov (United States)

    Cavin, Ralph K.

    2005-03-01

    Our society has benefited from the ‘Golden Age of Electronics’ for the last half century. The ubiquitous transistor, in its many manifestations, has enabled an explosion of capabilities in information processing, communications, and sensing that has spurred exponential growth in performance-benefit ratios. Much of the credit for this progress is due to the continued scaling of the silicon integrated circuit (IC) components and to the associated efficient fabrication processes that have made the IC affordable. There is a growing realization, from simple physics arguments, that as minimum features sizes approach the ten nanometer regime, scaling will very likely slow and eventually end. This doesn’t mean that the MOSFET will disappear, but more likely that it will need to be supplemented by other device and interconnect technologies if the exponential gains are to continue. In this talk we discuss the basis for the projected limitation of scaling of charge-based devices for logic and memory devices. We argue that a fundamental consideration for all devices, including those based on charge, relates to the capacity to manage heat generated by circuit operation. Our preference is for devices that operate at room temperature since the energy costs for cooling the devices must also be charged against the overall system energy consumption. (Cooling costs increase as a power of the difference between the ambient and the target temperature.) Therefore we seek new state variables to serve as an alternative to electrical charge for future information processing technologies. These technologies must provide the potential for sustaining exponential performance-cost benefits with time. The search must not only focus on device structures but on the underlying materials and process technologies that enable these structures. Indeed, to obtain extremely scaled CMOS, new materials and processes must also be developed. In this talk, we survey some of the candidates for

  3. Innovative machine designs for radiation processing

    International Nuclear Information System (INIS)

    Vroom, David

    2007-01-01

    In the 1990s Raychem Corporation established a program to investigate the commercialization of several promising applications involving the combined use of its core competencies in materials science, radiation chemistry and e-beam radiation technology. The applications investigated included those that would extend Raychem's well known heat recoverable polymer and wire and cable product lines as well as new potential applications such as remediation of contaminated aqueous streams. A central part of the program was the development of new accelerator technology designed to improve quality, lower processing costs and efficiently process conformable materials such at liquids. A major emphasis with this new irradiation technology was to look at the accelerator and product handling systems as one integrated, not as two complimentary systems

  4. Innovative machine designs for radiation processing

    Science.gov (United States)

    Vroom, David

    2007-12-01

    In the 1990s Raychem Corporation established a program to investigate the commercialization of several promising applications involving the combined use of its core competencies in materials science, radiation chemistry and e-beam radiation technology. The applications investigated included those that would extend Raychem's well known heat recoverable polymer and wire and cable product lines as well as new potential applications such as remediation of contaminated aqueous streams. A central part of the program was the development of new accelerator technology designed to improve quality, lower processing costs and efficiently process conformable materials such at liquids. A major emphasis with this new irradiation technology was to look at the accelerator and product handling systems as one integrated, not as two complimentary systems.

  5. Physical Properties for Lipids Based Process and Product Design

    DEFF Research Database (Denmark)

    Ana Perederic, Olivia; Kalakul, Sawitree; Sarup, Bent

    Lipid processing covers several oil and fats technologies such as: edible oil production, biodieselproduction, oleochemicals (e.g.: food additives, detergents) and pharmaceutical product manufacturing. New demands regarding design and development of better products and more sustainable processes...

  6. Biomedical Optical Imaging Technologies Design and Applications

    CERN Document Server

    2013-01-01

    This book provides an introduction to design of biomedical optical imaging technologies and their applications. The main topics include: fluorescence imaging, confocal imaging, micro-endoscope, polarization imaging, hyperspectral imaging, OCT imaging, multimodal imaging and spectroscopic systems. Each chapter is written by the world leaders of the respective fields, and will cover: principles and limitations of optical imaging technology, system design and practical implementation for one or two specific applications, including design guidelines, system configuration, optical design, component requirements and selection, system optimization and design examples, recent advances and applications in biomedical researches and clinical imaging. This book serves as a reference for students and researchers in optics and biomedical engineering.

  7. TECHNOLOGICAL PROCESS OF EFFLUENTS DEPHENOLYSATION

    Directory of Open Access Journals (Sweden)

    В. Трачевський

    2011-02-01

    Full Text Available The one of the important physical factors impacting on the environmental safety of industrial wastewater generated in the production of paints and varnishes is considered. Identification wastewater formation sources, composition, its amount in a particular type of resin is an essential point for developing methods of cleaning industrial wastewater treatment design and industrial plants. Deep cleaning of wastewater from phenol is a major challenge. Studies that mostly focused on the known methods of disposal of waste waters from phenol have been analyzed. It was shown that the shortcomings of many methods of sewage treatment of phenols by condensation at atmospheric pressure are the long duration of the process, significant cost of heat, and large residual phenol concentration in water, respectively. The most effective method of reducing the concentration of phenol in waste water is its oxidation in MnO2 suspension. The interaction of manganese oxides with sulfuric acid produces oxygen, which can oxidise phenol contained in the waste water. As a result of wastewater treatment of phenolic resins by manganese oxides in acidic sulfate medium phenol concentration  was decreased by 98.6 - 99.6%.

  8. New nuclear plant design and licensing process

    International Nuclear Information System (INIS)

    Luangdilok, W.

    1996-01-01

    This paper describes latest developments in the nuclear power reactor technology with emphasis on three areas: (1) the US technology of advanced passive light water reactors (AP600 and S BWR), (2) regulatory processes that certify their safety, and (3) current engineering concerns. The goal is to provide and insight of how the government's regulatory agency guarantees public safety by looking into how new passive safety features were designed and tested by vendors and how they were re-evaluated and retested by the US NRC. The paper then discusses the US 1989 nuclear licensing reform (10 CFR Part 52) whose objectives are to promote the standardization of nuclear power plants and provide for the early and definitive resolution of site and design issues before plants are built. The new licensing process avoids the unpredictability nd escalated construction cost under the old licensing process. Finally, the paper summarizes engineering concerns found in current light water reactors that may not go away in the new design. The concerns are related the material and water chemistry technology in dealing with corrosion problems in water-cooled nuclear reactor systems (PWRs and BWRs). These engineering concerns include core shroud cracking (BWRs), jet pump hold-down beam cracking (BWRs), steam generator tube stress corrosion cracking (PWR)

  9. Frameworks for ACI: Animals as Stakeholders in the Design Process

    OpenAIRE

    North, Steve; Mancini, Clara

    2016-01-01

    Animal-computer interaction (ACI) is an emerging discipline concerned with studying the relationship between animals and technology, designing interactive technology to support animals, and developing methodologies that can enable animals to participate in the design process as legitimate stakeholders. By welcoming animals to the design table, ACI is delineating new frontiers for interaction design. However, if co-designing HCI artifacts is already fraught with misunderstanding, how might ACI...

  10. 76 FR 37344 - Technology Evaluation Process

    Science.gov (United States)

    2011-06-27

    ...-NOA-0039] Technology Evaluation Process AGENCY: Office of Energy Efficiency and Renewable Energy... evaluation process. The stakeholder comment period is being extended an additional 30 days to give potential... seeks comments and information related to a commercial buildings technology evaluation process. DOE is...

  11. Perspectives on Multienzyme Process Technology

    DEFF Research Database (Denmark)

    Santacoloma, Paloma A.; Woodley, John M.

    2014-01-01

    There is little doubt that chemical processing of the future will involve an increasing number of biocatalytic processes using more than one enzyme. There are good reasons for developing such innovative biocatalytic processes and interesting new biocatalyst and process options will be introduced....

  12. Design and implementation of an Internet based effective controlling and monitoring system with wireless fieldbus communications technologies for process automation--an experimental study.

    Science.gov (United States)

    Cetinceviz, Yucel; Bayindir, Ramazan

    2012-05-01

    The network requirements of control systems in industrial applications increase day by day. The Internet based control system and various fieldbus systems have been designed in order to meet these requirements. This paper describes an Internet based control system with wireless fieldbus communication designed for distributed processes. The system was implemented as an experimental setup in a laboratory. In industrial facilities, the process control layer and the distance connection of the distributed control devices in the lowest levels of the industrial production environment are provided with fieldbus networks. In this paper, the Internet based control system that will be able to meet the system requirements with a new-generation communication structure, which is called wired/wireless hybrid system, has been designed on field level and carried out to cover all sectors of distributed automation, from process control, to distributed input/output (I/O). The system has been accomplished by hardware structure with a programmable logic controller (PLC), a communication processor (CP) module, two industrial wireless modules and a distributed I/O module, Motor Protection Package (MPP) and software structure with WinCC flexible program used for the screen of Scada (Supervisory Control And Data Acquisition), SIMATIC MANAGER package program ("STEP7") used for the hardware and network configuration and also for downloading control program to PLC. Copyright © 2012 ISA. Published by Elsevier Ltd. All rights reserved.

  13. Process technologies for water desalination

    International Nuclear Information System (INIS)

    Ramilo, Lucia B.; Gomez de Soler, Susana M.; Coppari, Norberto R.

    2003-01-01

    The use of the nuclear energy for simultaneous electricity and potable water production is an attractive, technically feasible, and safe alternative to fossil energy options. In Argentina the nuclear desalination option is being studied together with the alternative uses of the innovative advanced Argentinean CAREM reactor, in the research contract CNEA - IAEA to evaluate projects of nuclear desalination. The objective and scope of this work is to know the advantages and disadvantages of each desalination technology, distinctive characteristics of each of them, that make them adapt better to different uses and outline conditions and analysis of related antecedents of its use in the world. In this report a summarized description of those technologies is included by way of introduction, so as to highlight the main advantages and disadvantages of each of them. The improvements and innovations found in the last years for the different technologies are also included. (author)

  14. The power of design product innovation in sustainable energy technologies

    CERN Document Server

    Reinders, Angele H; Brezet, Han

    2012-01-01

    The Power of Design offers an introduction and a practical guide to product innovation, integrating the key topics that are necessary for the design of sustainable and energy-efficient products using sustainable energy technologies. Product innovation in sustainable energy technologies is an interdisciplinary field. In response to its growing importance and the need for an integrated view on the development of solutions, this text addresses the functional principles of various energy technologies next to the latest design processes and innovation methods. From the perspec

  15. Ultra-Low Power Memory Design in Scaled Technology Nodes

    DEFF Research Database (Denmark)

    Zeinali, Behzad

    technology nodes, this thesis also investigates emerging non-volatile spintronics memories. In this respect, STT-MRAMs and SOT-MRAMs are studied and their design challenges are explored. To improve the read performance of STT-MRAMs, a novel non-destructive self-reference sensing scheme is proposed enabling...... technology nodes i.e. sub-50 nm. The 6T-SRAM designed based on the proposed device shows 18% leakage reduction and 54%, 6.6% and 3.1X improvement in read margin, write margin and write time, respectively, compared to the conventional 6T-SRAM cell. To address the standby power issue of SRAMs in scaled......In today’s chip design, robust memory design is one of the key challenges of process technology scaling. The steady pace of process technology scaling allows doubling memory array sizes approximately every 2 years. However, further scaling emerges undesirable effects which threaten the power...

  16. Designing Corporate Databases to Support Technology Innovation

    Science.gov (United States)

    Gultz, Michael Jarett

    2012-01-01

    Based on a review of the existing literature on database design, this study proposed a unified database model to support corporate technology innovation. This study assessed potential support for the model based on the opinions of 200 technology industry executives, including Chief Information Officers, Chief Knowledge Officers and Chief Learning…

  17. Motor Mania: Revving Up for Technological Design

    Science.gov (United States)

    Frazier, Wendy M.; Sterling, Donna R.

    2008-01-01

    Students get very excited when confronted with problems that they find meaningful. Problem-based learning lets students solve problems using the strategies and tools that scientists use. While developing solutions via technological design and construction, students experience firsthand the relationship between science and technology. To capture…

  18. Low Power Analog Design in Scaled Technologies

    CERN Document Server

    Baschirotto, A; Cocciolo, G; D’Amico, S; De Matteis, M; Delizia, P

    2009-01-01

    In this paper an overview on the main issues in analog IC design in scaled CMOS technology is presented. Decreasing the length of MOS channel and the gate oxide has led to undoubted advantages in terms of chip area, speed and power consumption (mainly exploited in the digital parts). Besides, some drawbacks are introduced in term of power leakage and reliability. Moreover, the scaled technology lower supply voltage requirement has led analog designers to find new circuital solution to guarantee the required performance.

  19. Processing techniques applying laser technology

    International Nuclear Information System (INIS)

    Yamada, Yuji; Makino Yoshinobu

    2000-01-01

    The requirements for the processing of nuclear energy equipment include high precision, low distortion, and low heat input. Toshiba has developed laser processing techniques for cutting, welding, and surface heat treatment of nuclear energy equipment because the zone affected by distortion and heat in laser processing is very small. Laser processing contributes to the manufacturing of high-quality and high-reliability equipment and reduces the manufacturing period. (author)

  20. Systematic Sustainable Process Design and Analysis of Biodiesel Processes

    Directory of Open Access Journals (Sweden)

    Seyed Soheil Mansouri

    2013-09-01

    Full Text Available Biodiesel is a promising fuel alternative compared to traditional diesel obtained from conventional sources such as fossil fuel. Many flowsheet alternatives exist for the production of biodiesel and therefore it is necessary to evaluate these alternatives using defined criteria and also from process intensification opportunities. This work focuses on three main aspects that have been incorporated into a systematic computer-aided framework for sustainable process design. First, the creation of a generic superstructure, which consists of all possible process alternatives based on available technology. Second, the evaluation of this superstructure for systematic screening to obtain an appropriate base case design. This is done by first reducing the search space using a sustainability analysis, which provides key indicators for process bottlenecks of different flowsheet configurations and then by further reducing the search space by using economic evaluation and life cycle assessment. Third, the determination of sustainable design with/without process intensification using a phenomena-based synthesis/design method. A detailed step by step application of the framework is highlighted through a biodiesel production case study.

  1. Design Technology for Heterogeneous Embedded Systems

    CERN Document Server

    O'Connor, Ian; Piguet, Christian

    2012-01-01

    Designing technology to address the problem of heterogeneous embedded systems, while remaining compatible with standard “More Moore” flows, i.e. capable of handling simultaneously both silicon complexity and system complexity, represents one of the most important challenges facing the semiconductor industry today. While the micro-electronics industry has built its own specific design methods to focus mainly on the management of complexity through the establishment of abstraction levels, the emergence of device heterogeneity requires new approaches enabling the satisfactory design of physically heterogeneous embedded systems for the widespread deployment of such systems. This book, compiled largely from a set of contributions from participants of past editions of the Winter School on Heterogeneous Embedded Systems Design Technology (FETCH), proposes a broad and holistic overview of design techniques used to tackle the various facets of heterogeneity in terms of technology and opportunities at the physical ...

  2. SUSTAINABLE AND DESIGN BUILDING PROCESSES

    Directory of Open Access Journals (Sweden)

    Silvio F. R. MOTTA

    2009-05-01

    Full Text Available The article presents a historical revision of the sustainable development and the sustainable in the constructed environment. It describes the main concepts and practices for implantation of the sustainable in the civil construction. These concepts and practices are reviewed from the perspective of the dialectic method, the general theory of systems and the theories of creative processes. These concepts are also analyzed from the perspective of quality management. The article proposes a model based on the dialectic, in which sustainability is considered an open system and a search inventive. The implantation of the sustainable in projects, companies and design processes are considered as main strategy. A vertical insertion of the sustainable in the process is proposal. In this vertical insertion, the sustainable is presents in all the phases and activities of the process. The model is organized to promote the external creative solutions to the process, through the promotion of research centers. Tools of selection of possibilities and practical are suggested, considering the characteristic dialectics proposals. The article concludes that sustainable is a cultural change in the processes, practical and management current.

  3. Technology computer aided design simulation for VLSI MOSFET

    CERN Document Server

    Sarkar, Chandan Kumar

    2013-01-01

    Responding to recent developments and a growing VLSI circuit manufacturing market, Technology Computer Aided Design: Simulation for VLSI MOSFET examines advanced MOSFET processes and devices through TCAD numerical simulations. The book provides a balanced summary of TCAD and MOSFET basic concepts, equations, physics, and new technologies related to TCAD and MOSFET. A firm grasp of these concepts allows for the design of better models, thus streamlining the design process, saving time and money. This book places emphasis on the importance of modeling and simulations of VLSI MOS transistors and

  4. Advances in precision machining and moulding technology bring design opportunities.

    Science.gov (United States)

    Glendening, Paul

    2008-09-01

    Machining of materials for medical applications has moved to a new level of precision. In parallel with this, moulding technology has improved through the increased use of sensors in moulds, enhanced design simulation and processes such as micromoulding. This article examines the opportunities offered by these developments and includes examples of mass produced parts that demonstrate the new capabilities useful to product designers.

  5. Determinants of improved cassava processing technologies' (ICPT ...

    African Journals Online (AJOL)

    Determinants of improved cassava processing technologies' (ICPT) utilization among rural processors in Oyo State. ... Journal of Agriculture, Forestry and the Social Sciences ... Abstract. The study examined the factors determining the utilization of Improved Cassava Processing Technologies (ICPTs) in Oyo State, Nigeria.

  6. Advanced power plant materials, design and technology

    Energy Technology Data Exchange (ETDEWEB)

    Roddy, D. (ed.) [Newcastle University (United Kingdom). Sir Joseph Swan Institute

    2010-07-01

    The book is a comprehensive reference on the state of the art of gas-fired and coal-fired power plants, their major components and performance improvement options. Selected chapters are: Integrated gasification combined cycle (IGCC) power plant design and technology by Y. Zhu, and H. C. Frey; Improving thermal cycle efficiency in advanced power plants: water and steam chemistry and materials performance by B. Dooley; Advanced carbon dioxide (CO{sub 2}) gas separation membrane development for power plants by A. Basile, F. Gallucci, and P. Morrone; Advanced flue gas cleaning systems for sulphur oxides (SOx), nitrogen oxides (NOx) and mercury emissions control in power plants by S. Miller and B.G. Miller; Advanced flue gas dedusting systems and filters for ash and particulate emissions control in power plants by B.G. Miller; Advanced sensors for combustion monitoring in power plants: towards smart high-density sensor networks by M. Yu and A.K. Gupta; Advanced monitoring and process control technology for coal-fired power plants by Y. Yan; Low-rank coal properties, upgrading and utilisation for improving the fuel flexibility of advanced power plants by T. Dlouhy; Development and integration of underground coal gasification (UCG) for improving the environmental impact of advanced power plants by M. Green; Development and application of carbon dioxide (CO{sub 2}) storage for improving the environmental impact of advanced power plants by B. McPherson; and Advanced technologies for syngas and hydrogen (H{sub 2}) production from fossil-fuel feedstocks in power plants by P. Chiesa.

  7. Internet MEMS design tools based on component technology

    Science.gov (United States)

    Brueck, Rainer; Schumer, Christian

    1999-03-01

    The micro electromechanical systems (MEMS) industry in Europe is characterized by small and medium sized enterprises specialized on products to solve problems in specific domains like medicine, automotive sensor technology, etc. In this field of business the technology driven design approach known from micro electronics is not appropriate. Instead each design problem aims at its own, specific technology to be used for the solution. The variety of technologies at hand, like Si-surface, Si-bulk, LIGA, laser, precision engineering requires a huge set of different design tools to be available. No single SME can afford to hold licenses for all these tools. This calls for a new and flexible way of designing, implementing and distributing design software. The Internet provides a flexible manner of offering software access along with methodologies of flexible licensing e.g. on a pay-per-use basis. New communication technologies like ADSL, TV cable of satellites as carriers promise to offer a bandwidth sufficient even for interactive tools with graphical interfaces in the near future. INTERLIDO is an experimental tool suite for process specification and layout verification for lithography based MEMS technologies to be accessed via the Internet. The first version provides a Java implementation even including a graphical editor for process specification. Currently, a new version is brought into operation that is based on JavaBeans component technology. JavaBeans offers the possibility to realize independent interactive design assistants, like a design rule checking assistants, a process consistency checking assistants, a technology definition assistants, a graphical editor assistants, etc. that may reside distributed over the Internet, communicating via Internet protocols. Each potential user thus is able to configure his own dedicated version of a design tool set dedicated to the requirements of the current problem to be solved.

  8. Radioactive Dry Process Material Treatment Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. J.; Hung, I. H.; Kim, K. K. (and others)

    2007-06-15

    The project 'Radioactive Dry Process Material Treatment Technology Development' aims to be normal operation for the experiments at DUPIC fuel development facility (DFDF) and safe operation of the facility through the technology developments such as remote operation, maintenance and pair of the facility, treatment of various high level process wastes and trapping of volatile process gases. DUPIC Fuel Development Facility (DFDF) can accommodate highly active nuclear materials, and now it is for fabrication of the oxide fuel by dry process characterizing the proliferation resistance. During the second stage from march 2005 to February 2007, we carried out technology development of the remote maintenance and the DFDF's safe operation, development of treatment technology for process off-gas, and development of treatment technology for PWR cladding hull and the results was described in this report.

  9. The Center for Environmental Technology Innovative Technology Screening Process

    International Nuclear Information System (INIS)

    Bertrand, C.M.

    1995-02-01

    The Center for Environmental Technology's (CET) mission is to provide a fully integrated system for accelerated evaluation, development, commercialization, and public acceptance of creative environmental solutions which match the foremost demands in today's environmentally sensitive world. In short, CET will create a means to provide quick, effective solutions for environmental needs. To meet this mission objective, CET has created a unique and innovative approach to eliminating the usual barriers in developing and testing environmental technologies. The approach paves the way for these emerging, cutting-edge technologies by coordinating environmental restoration and waste management activities of industry, universities, and the government to: efficiently and effectively transfer technology to these users, provide market-driven, cost-effective technology programs to the public and DOE, and aid in developing innovative ideas by initiating efforts between DOE facilities and private industry. The central part to this mission is selecting and evaluating specific innovative technologies for demonstration and application at United States Department of Energy (DOE) installations. The methodology and criteria used for this selection, which is called the CET Innovative Technology Screening Process, is the subject of this paper. The selection criteria used for the screening process were modeled after other DOE technology transfer programs and were further developed by CET's Technology Screening and Evaluation Board (TSEB). The process benefits both CET and the proposing vendors by providing objective selection procedures based on predefined criteria. The selection process ensures a rapid response to proposing vendors, all technologies will have the opportunity to enter the selection process, and all technologies are evaluated on the same scale and with identical criteria

  10. Separation process using microchannel technology

    Science.gov (United States)

    Tonkovich, Anna Lee [Dublin, OH; Perry, Steven T [Galloway, OH; Arora, Ravi [Dublin, OH; Qiu, Dongming [Bothell, WA; Lamont, Michael Jay [Hilliard, OH; Burwell, Deanna [Cleveland Heights, OH; Dritz, Terence Andrew [Worthington, OH; McDaniel, Jeffrey S [Columbus, OH; Rogers, Jr; William, A [Marysville, OH; Silva, Laura J [Dublin, OH; Weidert, Daniel J [Lewis Center, OH; Simmons, Wayne W [Dublin, OH; Chadwell, G Bradley [Reynoldsburg, OH

    2009-03-24

    The disclosed invention relates to a process and apparatus for separating a first fluid from a fluid mixture comprising the first fluid. The process comprises: (A) flowing the fluid mixture into a microchannel separator in contact with a sorption medium, the fluid mixture being maintained in the microchannel separator until at least part of the first fluid is sorbed by the sorption medium, removing non-sorbed parts of the fluid mixture from the microchannel separator; and (B) desorbing first fluid from the sorption medium and removing desorbed first fluid from the microchannel separator. The process and apparatus are suitable for separating nitrogen or methane from a fluid mixture comprising nitrogen and methane. The process and apparatus may be used for rejecting nitrogen in the upgrading of sub-quality methane.

  11. Process Guide for Deburring Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Frey, David L.

    2012-10-25

    This report is an updated and consolidated view of the current deburring processes at the Kansas City Plant (KCP). It includes specific examples of current burr problems and the methods used for their detection. Also included is a pictorial review of the large variety of available deburr tools, along with a complete numerical listing of existing tools and their descriptions. The process for deburring all the major part feature categories is discussed.

  12. Conjoint Management of Business Processes and Information Technologies

    DEFF Research Database (Denmark)

    Siurdyban, Artur

    and improve business processes. As a consequence, there is a growing need to address managerial aspects of the relationships between information technologies and business processes. The aim of this PhD study is to investigate how the practice of conjoint management of business processes and information...... technologies can be supported and improved. The study is organized into five research papers and this summary. Each paper addresses a different aspect of conjoint management of business processes and information technologies, i.e. problem development and managerial practices on software...... and information technologies in a project environment. It states that both elements are intrinsically related and should be designed and considered together. The second case examines the relationships between information technology management and business process management. It discusses the multi-faceted role...

  13. Plasma spray technology process parameters and applications

    International Nuclear Information System (INIS)

    Sreekumar, K.P.; Karthikeyan, J.; Ananthapadmanabhan, P.V.; Venkatramani, N.; Chatterjee, U.K.

    1991-01-01

    The current trend in the structural design philosophy is based on the use of substrate with the necessary mechanical properties and a thin coating to exhibit surface properties. Plasma spray process is a versatile surface coating technique which finds extensive application in meeting advance technologies. This report describes the plasma spray technique and its use in developing coatings for various applications. The spray system is desribed in detail including the different variables such as power input to the torch, gas flow rate, powder properties, powder injection, etc. and their interrelation in deciding the quality of the coating. A brief write-up on the various plasma spray coatings developed for different applications is also included. (author). 15 refs., 15 figs., 2 tabs

  14. TECHNOLOGICAL PROCESS OF EFFLUENTS DEPHENOLYSATION

    OpenAIRE

    В. Трачевський; О. Никитюк

    2011-01-01

    The one of the important physical factors impacting on the environmental safety of industrial wastewater generated in the production of paints and varnishes is considered. Identification wastewater formation sources, composition, its amount in a particular type of resin is an essential point for developing methods of cleaning industrial wastewater treatment design and industrial plants. Deep cleaning of wastewater from phenol is a major challenge. Studies that mostly focused on the known meth...

  15. Electrochromic Windows: Advanced Processing Technology

    Energy Technology Data Exchange (ETDEWEB)

    SAGE Electrochromics, Inc

    2006-12-13

    This project addresses the development of advanced fabrication capabilities for energy saving electrochromic (EC) windows. SAGE EC windows consist of an inorganic stack of thin films deposited onto a glass substrate. The window tint can be reversibly changed by the application of a low power dc voltage. This property can be used to modulate the amount of light and heat entering buildings (or vehicles) through the glazings. By judicious management of this so-called solar heat gain, it is possible to derive significant energy savings due to reductions in heating lighting, and air conditioning (HVAC). Several areas of SAGE’s production were targeted during this project to allow significant improvements to processing throughput, yield and overall quality of the processing, in an effort to reduce the cost and thereby improve the market penetration. First, the overall thin film process was optimized to allow a more robust set of operating points to be used, thereby maximizing the yield due to the thin film deposition themselves. Other significant efforts aimed at improving yield were relating to implementing new procedures and processes for the manufacturing process, to improve the quality of the substrate preparation, and the quality of the IGU fabrication. Furthermore, methods for reworking defective devices were developed, to enable devices which would otherwise be scrapped to be made into useful product. This involved the in-house development of some customized equipment. Finally, the improvements made during this project were validated to ensure that they did not impact the exceptional durability of the SageGlass® products. Given conservative estimates for cost and market penetration, energy savings due to EC windows in residences in the US are calculated to be of the order 0.026 quad (0.026×1015BTU/yr) by the year 2017.

  16. Implications of Building Information Modeling on Interior Design Education: The Impact on Teaching Design Processes

    Directory of Open Access Journals (Sweden)

    Amy Roehl, MFA

    2013-06-01

    Full Text Available Currently, major shifts occur in design processes effecting business practices for industries involved with designing and delivering the built environment. These changing conditions are a direct result of industry adoption of relatively new technologies called BIM or Building Information Modeling. This review of literature examines implications of these changing processes on interior design education.

  17. Risk calculations in the manufacturing technology selection process

    DEFF Research Database (Denmark)

    Farooq, S.; O'Brien, C.

    2010-01-01

    and supports an industrial manager in achieving objective and comprehensive decisions regarding selection of a manufacturing technology. Originality/value - The paper explains the process of risk calculation in manufacturing technology selection by dividing the decision-making environment into manufacturing...... in the shape of opportunities and threats in different decision-making environments. Practical implications - The research quantifies the risk associated with different available manufacturing technology alternatives. This quantification of risk crystallises the process of technology selection decision making......Purpose - The purpose of this paper is to present result obtained from a developed technology selection framework and provide a detailed insight into the risk calculations and their implications in manufacturing technology selection process. Design/methodology/approach - The results illustrated...

  18. Application of membrane technologies for liquid radioactive waste processing

    International Nuclear Information System (INIS)

    2004-01-01

    Membrane separation processes have made impressive progress since the first synthesis of membranes almost 40 years ago. This progress was driven by strong technological needs and commercial expectations. As a result the range of successful applications of membranes and membrane processes is continuously broadening. In addition, increasing application of membrane processes and technologies lies in the increasing variations of the nature and characteristics of commercial membranes and membrane apparatus. The objective of the report is to review the information on application of membrane technologies in the processing of liquid radioactive waste. The report covers the various types of membranes, equipment design, range of applications, operational experience and the performance characteristics of different membrane processes. The report aims to provide Member States with basic information on the applicability and limitations of membrane separation technologies for processing liquid radioactive waste streams

  19. Reliability Methods for Shield Design Process

    Science.gov (United States)

    Tripathi, R. K.; Wilson, J. W.

    2002-01-01

    Providing protection against the hazards of space radiation is a major challenge to the exploration and development of space. The great cost of added radiation shielding is a potential limiting factor in deep space operations. In this enabling technology, we have developed methods for optimized shield design over multi-segmented missions involving multiple work and living areas in the transport and duty phase of space missions. The total shield mass over all pieces of equipment and habitats is optimized subject to career dose and dose rate constraints. An important component of this technology is the estimation of two most commonly identified uncertainties in radiation shield design, the shielding properties of materials used and the understanding of the biological response of the astronaut to the radiation leaking through the materials into the living space. The largest uncertainty, of course, is in the biological response to especially high charge and energy (HZE) ions of the galactic cosmic rays. These uncertainties are blended with the optimization design procedure to formulate reliability-based methods for shield design processes. The details of the methods will be discussed.

  20. Materials Process Design Branch. Work Unit Directive (WUD) 54

    National Research Council Canada - National Science Library

    LeClair, Steve

    2002-01-01

    The objectives of the Manufacturing Research WUD 54 are to 1) conduct in-house research to develop advanced materials process design/control technologies to enable more repeatable and affordable manufacturing capabilities and 2...

  1. The New Digital Engineering Design and Graphics Process.

    Science.gov (United States)

    Barr, R. E.; Krueger, T. J.; Aanstoos, T. A.

    2002-01-01

    Summarizes the digital engineering design process using software widely available for the educational setting. Points out that newer technology used in the field is not used in engineering graphics education. (DDR)

  2. The application of image processing software: Photoshop in environmental design

    Science.gov (United States)

    Dong, Baohua; Zhang, Chunmi; Zhuo, Chen

    2011-02-01

    In the process of environmental design and creation, the design sketch holds a very important position in that it not only illuminates the design's idea and concept but also shows the design's visual effects to the client. In the field of environmental design, computer aided design has made significant improvement. Many types of specialized design software for environmental performance of the drawings and post artistic processing have been implemented. Additionally, with the use of this software, working efficiency has greatly increased and drawings have become more specific and more specialized. By analyzing the application of photoshop image processing software in environmental design and comparing and contrasting traditional hand drawing and drawing with modern technology, this essay will further explore the way for computer technology to play a bigger role in environmental design.

  3. Cognitive Design for Learning: Cognition and Emotion in the Design Process

    Science.gov (United States)

    Hasebrook, Joachim

    2016-01-01

    We are so used to accept new technologies being the driver of change and innovation in human computer interfaces (HCI). In our research we focus on the development of innovations as a design process--or design, for short. We also refer to the entire process of creating innovations and putting them to use as "cognitive processes"--or…

  4. Quantum information processing : science & technology.

    Energy Technology Data Exchange (ETDEWEB)

    Horton, Rebecca; Carroll, Malcolm S.; Tarman, Thomas David

    2010-09-01

    Qubits demonstrated using GaAs double quantum dots (DQD). The qubit basis states are the (1) singlet and (2) triplet stationary states. Long spin decoherence times in silicon spurs translation of GaAs qubit in to silicon. In the near term the goals are: (1) Develop surface gate enhancement mode double quantum dots (MOS & strained-Si/SiGe) to demonstrate few electrons and spin read-out and to examine impurity doped quantum-dots as an alternative architecture; (2) Use mobility, C-V, ESR, quantum dot performance & modeling to feedback and improve upon processing, this includes development of atomic precision fabrication at SNL; (3) Examine integrated electronics approaches to RF-SET; (4) Use combinations of numerical packages for multi-scale simulation of quantum dot systems (NEMO3D, EMT, TCAD, SPICE); and (5) Continue micro-architecture evaluation for different device and transport architectures.

  5. Wood Technology: Techniques, Processes, and Products

    Science.gov (United States)

    Oatman, Olan

    1975-01-01

    Seven areas of wood technology illustrates applicable techniques, processes, and products for an industrial arts woodworking curriculum. They are: wood lamination; PEG (polyethylene glycol) diffusion processes; wood flour and/or particle molding; production product of industry; WPC (wood-plastic-composition) process; residential construction; and…

  6. Microwave plasma emerging technologies for chemical processes

    NARCIS (Netherlands)

    de la Fuente, Javier F.; Kiss, Anton A.; Radoiu, Marilena T.; Stefanidis, Georgios D.

    2017-01-01

    Microwave plasma (MWP) technology is currently being used in application fields such as semiconductor and material processing, diamond film deposition and waste remediation. Specific advantages of the technology include the enablement of a high energy density source and a highly reactive medium,

  7. Selecting food process designs from a supply chain perspective

    NARCIS (Netherlands)

    Jonkman, Jochem; Bloemhof-Ruwaard, Jacqueline; Vorst, van der Jack G.A.J.; Padt, van der Albert

    2017-01-01

    The food industry can convert agro-materials into products using many alternative process designs. To remain competitive, companies have to select the design leading to the best supply chain performance. These designs differ in the technologies used and the product portfolio produced.

  8. Process analytical technology (PAT) for biopharmaceuticals

    DEFF Research Database (Denmark)

    Glassey, Jarka; Gernaey, Krist; Clemens, Christoph

    2011-01-01

    Process analytical technology (PAT), the regulatory initiative for building in quality to pharmaceutical manufacturing, has a great potential for improving biopharmaceutical production. The recommended analytical tools for building in quality, multivariate data analysis, mechanistic modeling, nov...

  9. Building STEAM in Design-Related Technology

    Science.gov (United States)

    Maldonado, Elaine; Pearson, Karen R.

    2013-01-01

    TECH-FIT is a National Science Foundation initiative at FIT, part of the State University of New York. An institution with over 85% female students, this interdisciplinary, design-related STEM (Science, Technology, Engineering, and Mathematics) project sought to increase inclusion and student performance in STEM. Building on new and existing…

  10. RFIC and MMIC design and technology

    CERN Document Server

    Robertson, I D

    2001-01-01

    This book gives an in-depth account of GaAs, InP and SiGe, technologies and describes all the key techniques for the design of amplifiers,ranging from filters and data converters to image oscillators, mixers, switches, variable attenuators, phase shifters, integrated antennas and complete monolithic transceivers.

  11. Teaching creativity in a technological design context

    NARCIS (Netherlands)

    van Overveld, Kees; Ahn, René; Reymen, Isabelle; Ivashkov, Maxim

    2003-01-01

    We want to teach creativity techniques to prospective technological designers in a domainindependent way. To facilitate this, we adopt a format and nomenclature that is close to the terminology used by engineers. Central notions are concepts, attributes and values. A crucial role is played by, what

  12. Biometric systems technology, design and performance evaluation

    CERN Document Server

    Wayman, James; Maltoni, Davide

    2005-01-01

    A reference book for anyone involved in the design, management or implementation of biometric systems, and provides all the information needed to a build reliable system. It focuses on the four most widely used types of biometric technology - speech, fingerprint, iris and face recognition.

  13. Designing Technology Activities that Teach Mathematics

    Science.gov (United States)

    Silk, Eli M.; Higashi, Ross; Shoop, Robin; Schunn, Christian D.

    2010-01-01

    Over the past three years, the authors have conducted research in middle and high school classrooms in an effort to improve the effectiveness of robotics to teach science, technology, engineering, and mathematics (STEM) education--their focus has been on math. The authors have found that subtle changes in the design and setup of the lesson make a…

  14. User-centric technology design for nonprofit and civic engagements

    CERN Document Server

    Saeed, Saqib

    2014-01-01

    Due to the increased global political importance of the nonprofit sector, its technological support and organizational characteristics have become important fields of research. In order to conduct effective work, nonprofits need to communicate and coordinate effectively. However, such settings are generally characterized by a lack of resources, an absence of formal hierarchical structures and differences in languages and culture among the activists. Modern technologies could help nonprofit networks in improving their working. In order to design appropriate technological support for such settings, it is important to understand their work practices, which widely differ from traditional business organizations. This book aims to strengthen the body of knowledge by providing user studies and concepts related to user centered technology design process for nonprofit settings. The examination of ethnographic studies and user centered evaluation of IT artifacts in practice will further the understanding of design requ...

  15. Ergonomics approaches to sociotechnical design processes

    DEFF Research Database (Denmark)

    Broberg, Ole

    2003-01-01

    A five-year design process of a continuous process wok has been studied with the aim of elucidating the conditions for integrating work environment aspects. The design process was seen as a network building activity and as a social shaping process of the artefact. A work environment log...... is suggested as tool designers can use to integrate considerations of future operators' work environment....

  16. Applying Trusted Network Technology To Process Control Systems

    Science.gov (United States)

    Okhravi, Hamed; Nicol, David

    Interconnections between process control networks and enterprise networks expose instrumentation and control systems and the critical infrastructure components they operate to a variety of cyber attacks. Several architectural standards and security best practices have been proposed for industrial control systems. However, they are based on older architectures and do not leverage the latest hardware and software technologies. This paper describes new technologies that can be applied to the design of next generation security architectures for industrial control systems. The technologies are discussed along with their security benefits and design trade-offs.

  17. Technology strategy for subsea processing and transport; Technology Target Areas; TTA6 - Subsea processing and transportation

    Energy Technology Data Exchange (ETDEWEB)

    2008-07-01

    mechanical design of multiphase pumps and compressors (F). In the list F denotes fundamental research covered under the RCN Petromaks programme, and P denotes piloting of technology covered under the RCN Demo 2000 programme. The key recommendations from this TTA group are: The Norwegian authorities need to support fundamental research and development and knowledge build-up to solve the listed technology challenges. Of special importance is to maintain and extend the knowledge base and educate engineers to use and further develop multiphase transport and subsea processing technology. The development and application of technology products will mainly be handled by the industry. However, public financial support in an early development phase and also in the first field implementation is important in order to speed up industrialisation and promote the activity level. Such support schemes are therefore recommended to be continued.

  18. Behavioural design: A process for integrating behaviour change and design

    DEFF Research Database (Denmark)

    Cash, Philip; Hartlev, Charlotte Gram; Durazo, Christine Boysen

    2017-01-01

    Nudge, persuasion, and the influencing of human behaviour through design are increasingly important topics in design research and in the wider public consciousness. However, current theoretical approaches to behaviour change have yet to be operationalized this in design process support....... Specifically, there are few empirically grounded processes supporting designers in realising behaviour change projects. In response to this, 20 design projects from a case company are analysed in order to distil a core process for behavioural design. Results show a number of process stages and activities...... associated with project success, pointing to a new perspective on the traditional design process, and allowing designers to integrate key insights from behaviour change theory. Using this foundation we propose the Behavioural Design process....

  19. TEXACO GASIFICATION PROCESS - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report summarizes the evaluation of the Texaco Gasification Process (TGP) conducted under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program. The Texaco Gasification Process was developed by Texaco Inc. The TGP is a comm...

  20. Laser Processing Technology using Metal Powders

    International Nuclear Information System (INIS)

    Jang, Jeong-Hwan; Moon, Young-Hoon

    2012-01-01

    The purpose of this paper is to review the state of laser processing technology using metal powders. In recent years, a series of research and development efforts have been undertaken worldwide to develop laser processing technologies to fabricate metal-based parts. Layered manufacturing by the laser melting process is gaining ground for use in manufacturing rapid prototypes (RP), tools (RT) and functional end products. Selective laser sintering / melting (SLS/SLM) is one of the most rapidly growing rapid prototyping techniques. This is mainly due to the processes's suitability for almost any materials, including polymers, metals, ceramics and many types of composites. The interaction between the laser beam and the powder material used in the laser melting process is one of the dominant phenomena defining feasibility and quality. In the case of SLS, the powder is not fully melted during laser scanning, therefore the SLS-processed parts are not fully dense and have relatively low strength. To overcome this disadvantage, SLM and laser cladding (LC) processes have been used to enable full melting of the powder. Further studies on the laser processing technology will be continued due to the many potential applications that the technology offers.

  1. ADEPT2 - Next Generation Process Management Technology

    NARCIS (Netherlands)

    Dadam, P.; Rinderle, S.B.; Reichert, M.U.; Jurisch, M.; Acker, H.; Göser, K.; Kreher, U; Lauer, M.

    If current process management systems shall be applied to a broad spectrum of applications, they will have to be significantly improved with respect to their technological capabilities. In particular, in dynamic environments it must be possible to quickly implement and deploy new processes, to

  2. Designing Assistive Technologies for the ADHD Domain

    DEFF Research Database (Denmark)

    Sonne, Tobias; Grønbæk, Kaj

    (ADHD). In this paper, we identify a set of challenges that children with ADHD typically experience, which provides an empirical foundation for pervasive health researchers to address the ADHD domain. The work is grounded in extensive empirical studies and it is contextualized using literature on ADHD....... Based on these studies, we also present lessons learned that are relevant to consider when designing assistive technology to support children with ADHD. Finally, we provide an example (CASTT) of our own work to illustrate how the presented findings can frame research activities and be used to develop...... novel assistive technology to empower children with ADHD and improve their wellbeing....

  3. Membrane technology in chemical process industry

    International Nuclear Information System (INIS)

    Bhattacharjee, B.

    2002-01-01

    The technology developments in current century will mainly focus on the energy, safe and effective utilization of available natural resources and environment. Production and effective use of water resource at industrial level will directly affect the environment. Similarly the various means of energy production and its consumption will also bear a direct impact on environment. In any chemical industry a large portion of energy consumption goes to separation process which in turn affect the cost of production as well as total cost of the plant. Therefore, minimization of energy consumption, finding out new nondestructive separation technology and reutilization of all recovered process streams are the new thrust area for chemical industries. In view of this, a comparatively new separation technology, 'Membrane Science and Technology' is available to the chemical industry. The potential of this technology is immense because of its simple operation, less chemical additives requirement, less energy consumption and easy adoptability to the existing process. This technology is often considered as energy efficient, environmentally benign and clean technology

  4. Innovative Pedagogical Processes Involving Educational Technology

    DEFF Research Database (Denmark)

    Weitze, Charlotte Lærke

    This design-based research project investigates the elements, methods, processes and practices that can contribute to the creation of reflected, innovative and motivating learning designs for teachers and students in a hybrid synchronous video-mediated teaching context, with a focus on how...... about how design and learning processes can support continuous pedagogical innovation and competence development. The objective of the learning designs was to create motivating learning experiences for the students in the hybrid synchronous video-mediated learning environment, to which end...... it experimented with gamified learning designs. This involved the students designing digital games while implementing learning goals from their curriculum. The project thus created knowledge about which learning designs and competence development models were possible in this environment, which learning designs...

  5. Engineering, Trade, and Technical Cluster. Task Analyses. Drafting and Design Technology, Precision Machining Technology, Electronics Technology.

    Science.gov (United States)

    Henrico County Public Schools, Glen Allen, VA. Virginia Vocational Curriculum and Resource Center.

    Developed in Virginia, this publication contains task analysis guides to support selected tech prep programs that prepare students for careers in the engineering, trade, and technical cluster. Three occupations are profiled: drafting and design technology, precision machining technology, and electronics technology. Each guide contains the…

  6. Toward a Theory for the Design of Human Technologies

    DEFF Research Database (Denmark)

    Simonsen, Jesper; Hertzum, Morten; Nielsen, Jørgen Lerche

    2014-01-01

    Design is increasingly becoming a part of the university curriculum and research agenda. A theory about the pro-cess and practice of design might be important to estab-lish design as a main subject at universities. We believe it is in the interest of many design communities – not least the Partic...... the PD community to engage in collective theory building, and we present a framework intended to support our shared reflections on the design of human technologies.......Design is increasingly becoming a part of the university curriculum and research agenda. A theory about the pro-cess and practice of design might be important to estab-lish design as a main subject at universities. We believe it is in the interest of many design communities – not least...... the Participatory Design (PD) community – to engage in theorizing design, on the basis of our understanding of design and design practices. This theory could be posi-tioned as an alternative to other attempts to theorize design, for example the influential efforts of the Information Systems (IS) community. We urge...

  7. Integrated plant information technology design support functionality

    International Nuclear Information System (INIS)

    Kim, Yeon Seung; Kim, Dae Jin; Barber, P. W.; Goland, D.

    1996-06-01

    This technical report was written as a result of Integrated Plant Information System (IPIS) feasibility study on CANDU 9 project which had been carried out from January, 1994 to March, 1994 at AECL (Atomic Energy Canada Limited) in Canada. From 1987, AECL had done endeavour to change engineering work process from paper based work process to computer based work process through CANDU 3 project. Even though AECL had a lot of good results form computerizing the Process Engineering, Instrumentation Control and Electrical Engineering, Mechanical Engineering, Computer Aided Design and Drafting, and Document Management System, but there remains the problem of information isolation and integration. On this feasibility study, IPIS design support functionality guideline was suggested by evaluating current AECL CAE tools, analyzing computer aided engineering task and work flow, investigating request for implementing integrated computer aided engineering and describing Korean request for future CANDU design including CANDU 9. 6 figs. (Author)

  8. Integrated plant information technology design support functionality

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yeon Seung; Kim, Dae Jin [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Barber, P. W.; Goland, D. [Atomic Energy Canada Ltd., (Canada)

    1996-06-01

    This technical report was written as a result of Integrated Plant Information System (IPIS) feasibility study on CANDU 9 project which had been carried out from January, 1994 to March, 1994 at AECL (Atomic Energy Canada Limited) in Canada. From 1987, AECL had done endeavour to change engineering work process from paper based work process to computer based work process through CANDU 3 project. Even though AECL had a lot of good results form computerizing the Process Engineering, Instrumentation Control and Electrical Engineering, Mechanical Engineering, Computer Aided Design and Drafting, and Document Management System, but there remains the problem of information isolation and integration. On this feasibility study, IPIS design support functionality guideline was suggested by evaluating current AECL CAE tools, analyzing computer aided engineering task and work flow, investigating request for implementing integrated computer aided engineering and describing Korean request for future CANDU design including CANDU 9. 6 figs. (Author).

  9. Applying the miniaturization technologies for biosensor design.

    Science.gov (United States)

    Derkus, Burak

    2016-05-15

    Microengineering technologies give us some opportunities in developing high-tech sensing systems that operate with low volumes of samples, integrates one or more laboratory functions on a single substrate, and enables automation. These millimetric sized devices can be produced for only a few dollars, which makes them promising candidates for mass-production. Besides electron beam lithography, stencil lithography, nano-imprint lithography or dip pen lithography, basic photolithography is the technique which is extensively used for the design of microengineered sensing systems. This technique has some advantages such as easy-to-manufacture, do not require expensive instrumentation, and allow creation of lower micron-sized patterns. In this review, it has been focused on three different type of microengineered sensing devices which are developed using micro/nano-patterning techniques, microfluidic technology, and microelectromechanics system based technology. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. 76 FR 70368 - Disaster Designation Process

    Science.gov (United States)

    2011-11-14

    ... Service Rural Utilities Service 7 CFR Parts 759, 1945 and 762 RIN 0560-AH17 Disaster Designation Process... severe drought situations, and change the USDA Secretarial disaster designation process from six steps to... programs such as crop disaster payment programs. The current disaster designation process is set out in 7...

  11. Biomimetics for architecture & design nature, analogies, technology

    CERN Document Server

    Pohl, Göran

    2015-01-01

    This book provides the readers with a timely guide to the application of biomimetic principles in architecture and engineering design. As a result of a combined effort by two internationally recognized authorities, the biologist Werner Nachtigall and the architect Göran Pohl, the book describes the principles which can be used to compare nature and technology, and at the same time it presents detailed explanations and examples showing how biology can be used as a source of inspiration and “translated” in building and architectural solutions (biomimicry). Even though nature cannot be directly copied, the living world can provide architects and engineers with a wealth of analogues and inspirations for their own creative designs. But how can analysis of natural entities give rise to advanced and sustainable design? By reporting on the latest bionic design methods and using extensive artwork, the book guides readers through the field of nature-inspired architecture, offering an extraordinary resource for pro...

  12. The CANDU 9 distributed control system design process

    International Nuclear Information System (INIS)

    Harber, J.E.; Kattan, M.K.; Macbeth, M.J.

    1997-01-01

    Canadian designed CANDU pressurized heavy water nuclear reactors have been world leaders in electrical power generation. The CANDU 9 project is AECL's next reactor design. Plant control for the CANDU 9 station design is performed by a distributed control system (DCS) as compared to centralized control computers, analog control devices and relay logic used in previous CANDU designs. The selection of a DCS as the platform to perform the process control functions and most of the data acquisition of the plant, is consistent with the evolutionary nature of the CANDU technology. The control strategies for the DCS control programs are based on previous CANDU designs but are implemented on a new hardware platform taking advantage of advances in computer technology. This paper describes the design process for developing the CANDU 9 DCS. Various design activities, prototyping and analyses have been undertaken in order to ensure a safe, functional, and cost-effective design. (author)

  13. Technological Design in a multidisciplinary, sensory, context

    Directory of Open Access Journals (Sweden)

    Stephen Emmitt

    2011-11-01

    Full Text Available Architecture involves measurable (tangible and immeasurable (intangible elements, which makes the pursuit of good architecture a constant challenge for all project contributors. It is often the immeasurable aspects, the intuition and feel for a project and the way in which actors interact, which help to bring about exciting, creative and functional buildings that reflect the best of humanity, time and place. In this article the author explores the role of technological design within an environmentally responsible age. The narrative moves through the sustainable vernacular to the constructive link between design and construction, concluding with some reflections on the shape of things to come.

  14. Design Challenges and Guidelines for Persuasive Technologies that Facilitate Healthy Lifestyles

    Science.gov (United States)

    Xu, Jie; Chen, Ping-yu; Uglow, Scott; Scott, Alison; Montague, Enid

    2013-01-01

    Many diseases and health risks are the result of unhealthy lifestyles and technology could be used as an intervention. However, designing healthy lifestyle technologies is challenging, as the technology should be able to influence user behavior. In this case study, the design and evaluation process of a persuasive healthy lifestyle assistance technology was investigated. The iterative design and evaluation process included: contextual inquiry, storyboarding, concept generation, paper prototyping, video prototyping, interactive prototyping and user testing. Several design challenges are identified and guidelines are described for designing a technological intervention to encourage healthy lifestyles. PMID:24855501

  15. Revolution of Nuclear Power Plant Design Through Digital Technology

    International Nuclear Information System (INIS)

    Zhang, L.; Shi, J.; Chen, W.

    2015-01-01

    In the digital times, digital technology has penetrated into every industry. As the highest safety requirement standard, nuclear power industry needs digital technology more to breed high quality and efficiency. Digital power plant is derived from digital design and the digitisation of power plant transfer is an inevitable trend. This paper introduces the technical solutions and features of digital nuclear power plant construction by Shanghai Nuclear Engineering Research & Design Institute, points out the key points and technical difficulties that exist in the process of construction and can serve as references for further promoting construction of digital nuclear power plant. Digital technology is still flourishing. Although many problems will be encountered in construction, it is believed that digital technology will make nuclear power industry more safe, cost-effective and efficient. (author)

  16. Uncertainty modeling process for semantic technology

    Directory of Open Access Journals (Sweden)

    Rommel N. Carvalho

    2016-08-01

    Full Text Available The ubiquity of uncertainty across application domains generates a need for principled support for uncertainty management in semantically aware systems. A probabilistic ontology provides constructs for representing uncertainty in domain ontologies. While the literature has been growing on formalisms for representing uncertainty in ontologies, there remains little guidance in the knowledge engineering literature for how to design probabilistic ontologies. To address the gap, this paper presents the Uncertainty Modeling Process for Semantic Technology (UMP-ST, a new methodology for modeling probabilistic ontologies. To explain how the methodology works and to verify that it can be applied to different scenarios, this paper describes step-by-step the construction of a proof-of-concept probabilistic ontology. The resulting domain model can be used to support identification of fraud in public procurements in Brazil. While the case study illustrates the development of a probabilistic ontology in the PR-OWL probabilistic ontology language, the methodology is applicable to any ontology formalism that properly integrates uncertainty with domain semantics.

  17. Designing for Diverse Learning: Case Study of Place-Based Learning in Design and Technologies Pre-Service Teacher Education

    Science.gov (United States)

    Best, Marnie; MacGregor, Denise; Price, Deborah

    2017-01-01

    Place-based learning experiences in Design and Technologies education connect people and place with design processes and products. Drawing on place-based learning, this case study shares the experiences of eight final year pre-service Design and Technologies education students from the University of South Australia as they collaborated with…

  18. User-Centered Design and Interactive Health Technologies for Patients

    Science.gov (United States)

    De Vito Dabbs, Annette; Myers, Brad A.; Mc Curry, Kenneth R.; Dunbar-Jacob, Jacqueline; Hawkins, Robert P.; Begey, Alex; Dew, Mary Amanda

    2010-01-01

    Despite recommendations that patients be involved in the design and testing of health technologies, few reports describe how to involve patients in systematic and meaningful ways to ensure that applications are customized to meet their needs. User-centered design (UCD) is an approach that involves end-users throughout the development process so that technology support tasks, are easy to operate, and are of value to users. In this paper we provide an overview of UCD and use the development of Pocket Personal Assistant for Tracking Health (Pocket PATH), to illustrate how these principles and techniques were applied to involve patients in the development of this interactive health technology. Involving patient-users in the design and testing ensured functionality and usability, therefore increasing the likelihood of promoting the intended health outcomes. PMID:19411947

  19. Gaps in the Design Process

    Energy Technology Data Exchange (ETDEWEB)

    Veers, Paul

    2016-10-04

    The design of offshore wind plants is a relatively new field. The move into U.S. waters will have unique environmental conditions, as well as expectations from the authorities responsible for managing the development. Wind turbines are required to test their assumed design conditions with the site conditions of the plant. There are still some outstanding issues on how we can assure that the design for both the turbine and the foundation are appropriate for the site and will have an acceptable level of risk associated with the particular installation.

  20. Hafnium transistor process design for neural interfacing.

    Science.gov (United States)

    Parent, David W; Basham, Eric J

    2009-01-01

    A design methodology is presented that uses 1-D process simulations of Metal Insulator Semiconductor (MIS) structures to design the threshold voltage of hafnium oxide based transistors used for neural recording. The methodology is comprised of 1-D analytical equations for threshold voltage specification, and doping profiles, and 1-D MIS Technical Computer Aided Design (TCAD) to design a process to implement a specific threshold voltage, which minimized simulation time. The process was then verified with a 2-D process/electrical TCAD simulation. Hafnium oxide films (HfO) were grown and characterized for dielectric constant and fixed oxide charge for various annealing temperatures, two important design variables in threshold voltage design.

  1. WEARABLE TECHNOLOGY: FASHION DESIGNERS BRINGS TOGETHER FASHION WITH SCIENCE

    Directory of Open Access Journals (Sweden)

    Gozde Yetmen

    2017-04-01

    Full Text Available In this paper, from the designers, engineers, scientists and technicians are working multidisciplinary and developed in process of time; electronic textiles, smart textiles, nano technology, 3D printed textiles and coded couture. As a result today generated "Wearable Technology". Designer creates contemporary fashion design products and concepts will be examined in this paper. Since the mid-twentieth century, to today’s XXI Century, living an important technological development for the future of fashion is to ensure the creation of high tech fabrics with functional textile fibers. 21st Century avant-garde fashion designers: Hussein Chalayan, Ryan Genz & Francesca Rosella and Anouk Wipprecht are working on the future garment design and determine a new visions that the texture of the emerging trends and technologies in the area of fashion. They realized that the importance of innovation in their collections. For this reason, textile engineers and scientists are working together and investigating various technologies to develop a variety of innovative fabrics or garments.

  2. Aerospace Engineering Systems and the Advanced Design Technologies Testbed Experience

    Science.gov (United States)

    VanDalsem, William R.; Livingston, Mary E.; Melton, John E.; Torres, Francisco J.; Stremel, Paul M.

    1999-01-01

    Continuous improvement of aerospace product development processes is a driving requirement across much of the aerospace community. As up to 90% of the cost of an aerospace product is committed during the first 10% of the development cycle, there is a strong emphasis on capturing, creating, and communicating better information (both requirements and performance) early in the product development process. The community has responded by pursuing the development of computer-based systems designed to enhance the decision-making capabilities of product development individuals and teams. Recently, the historical foci on sharing the geometrical representation and on configuration management are being augmented: 1) Physics-based analysis tools for filling the design space database; 2) Distributed computational resources to reduce response time and cost; 3) Web-based technologies to relieve machine-dependence; and 4) Artificial intelligence technologies to accelerate processes and reduce process variability. The Advanced Design Technologies Testbed (ADTT) activity at NASA Ames Research Center was initiated to study the strengths and weaknesses of the technologies supporting each of these trends, as well as the overall impact of the combination of these trends on a product development event. Lessons learned and recommendations for future activities are reported.

  3. External designers in product design processes of small manufacturing firms

    NARCIS (Netherlands)

    Berends, Hans; Reymen, Isabelle; Stultiëns, Rutger G L; Peutz, Murk

    Small manufacturing firms often fail to reap the benefits of good design practices. This study investigates how the involvement of external designers influences the evolution of product design processes in small manufacturing firms. Qualitative and quantitative process research methods were used to

  4. Supporting chemical process design under uncertainty

    Directory of Open Access Journals (Sweden)

    A. Wechsung

    2010-09-01

    Full Text Available A major challenge in chemical process design is to make design decisions based on partly incomplete or imperfect design input data. Still, process engineers are expected to design safe, dependable and cost-efficient processes under these conditions. The complexity of typical process models limits intuitive engineering estimates to judge the impact of uncertain parameters on the proposed design. In this work, an approach to quantify the effect of uncertainty on a process design in order to enhance comparisons among different designs is presented. To facilitate automation, a novel relaxation-based heuristic to differentiate between numerical and physical infeasibility when simulations do not converge is introduced. It is shown how this methodology yields more details about limitations of a studied process design.

  5. Reactor design concepts for radiation processing

    International Nuclear Information System (INIS)

    Berejka, A.J.

    2004-01-01

    During the formative years of irradiation processing, the 1950s and 1960s, there was laboratory and academic interest in the use of this form of energy transfer to initiate polymerization for the manufacture of plastics and in other chemical processes. Studies were often based on low-dose-rate Cobalt-60 systems. The electron beam (EB) accelerator technology of the time was not as yet at the robust and industrially reliable state that it is now at the beginning of the twenty-first century. A series of reactor designs illustrate how an electron beam can be incorporated into reactor vessels for initiating gas and liquid phase polymerizations on a continuous basis. Development of such approaches, which would rely upon contemporary, high current electron beams to initiate polymerization, would help the chemical processing industry alleviate its problems of catalyst disposal and its related environmental concerns. Systems for treating materials in bulk at low doses, such as those typically used for grain disinfection, at high through-put rates, are also illustrated. Simplified shielding is envisioned in each proposed process system

  6. A designed experiment in a continuous process

    OpenAIRE

    Vanhatalo, Erik; Vännman, Kerstin; Hyllander, Gunilla

    2007-01-01

    This paper discusses the design and analysis of an experiment performed in a continuous process (CP). A full factorial design with replicates is used to test three types of pellets on two levels of a process variable in an experimental blast furnace process. Issues and considerations concerning the experimental design and analysis are discussed. For example, an adaptive experimental design is used. We propose a multivariate approach to the analysis of the experiment, in form of principal comp...

  7. The Design of Large Technological Systems

    DEFF Research Database (Denmark)

    Pineda, Andres Felipe Valderrama

    ) of the arena of development where the system will be constructed. Second, designers define scripts through the delegation of agency, causes and responsibilities to humans and non-humans, a process in which the limits of the system are also defined and enacted. Third, the process of the definition of scripts...... implies a reconfiguration of the designing team, the supporting actors and the diverse user groups. By tracing material scripts, the author accounts for the unfolding of visions, politics and materialities that constitute the system. The analysis contributes to understanding the complex sociotechnical...

  8. Saving Material with Systematic Process Designs

    Science.gov (United States)

    Kerausch, M.

    2011-08-01

    Global competition is forcing the stamping industry to further increase quality, to shorten time-to-market and to reduce total cost. Continuous balancing between these classical time-cost-quality targets throughout the product development cycle is required to ensure future economical success. In today's industrial practice, die layout standards are typically assumed to implicitly ensure the balancing of company specific time-cost-quality targets. Although die layout standards are a very successful approach, there are two methodical disadvantages. First, the capabilities for tool design have to be continuously adapted to technological innovations; e.g. to take advantage of the full forming capability of new materials. Secondly, the great variety of die design aspects have to be reduced to a generic rule or guideline; e.g. binder shape, draw-in conditions or the use of drawbeads. Therefore, it is important to not overlook cost or quality opportunities when applying die design standards. This paper describes a systematic workflow with focus on minimizing material consumption. The starting point of the investigation is a full process plan for a typical structural part. All requirements are definedaccording to a predefined set of die design standards with industrial relevance are fulfilled. In a first step binder and addendum geometry is systematically checked for material saving potentials. In a second step, blank shape and draw-in are adjusted to meet thinning, wrinkling and springback targets for a minimum blank solution. Finally the identified die layout is validated with respect to production robustness versus splits, wrinkles and springback. For all three steps the applied methodology is based on finite element simulation combined with a stochastical variation of input variables. With the proposed workflow a well-balanced (time-cost-quality) production process assuring minimal material consumption can be achieved.

  9. Lipid Processing Technology: Building a Multilevel Modeling Network

    DEFF Research Database (Denmark)

    Díaz Tovar, Carlos Axel; Mustaffa, Azizul Azri; Mukkerikar, Amol

    2011-01-01

    The aim of this work is to present the development of a computer aided multilevel modeling network for the systematic design and analysis of processes employing lipid technologies. This is achieved by decomposing the problem into four levels of modeling: i) pure component property modeling...

  10. Transition process from emerging NDT technology to production inspection application

    Science.gov (United States)

    Jappe, William; Wood, Nancy; Johnson, Maurice

    1995-07-01

    The successful application of emerging NDT technologies for specific aging aircraft inspections requires an integration of efforts between aircraft operators, airframe manufacturers, NDT equipment designers, and government regulators. This paper describes the development process that was followed to establish an alternate inspection technique for a DC-10 crown skin butt joint inspection. Initial investigation, intermediate development, and final evaluations are discussed.

  11. UOE Pipe Manufacturing Process Simulation: Equipment Designing and Construction

    Science.gov (United States)

    Delistoian, Dmitri; Chirchor, Mihael

    2017-12-01

    UOE pipe manufacturing process influence directly on pipeline resilience and operation capacity. At present most spreaded pipe manufacturing method is UOE. This method is based on cold forming. After each technological step appears a certain stress and strain level. For pipe stress strain study is designed and constructed special equipment that simulate entire technological process.UOE pipe equipment is dedicated for manufacturing of longitudinally submerged arc welded DN 400 (16 inch) steel pipe.

  12. Image processing technology for nuclear facilities

    International Nuclear Information System (INIS)

    Lee, Jong Min; Lee, Yong Beom; Kim, Woong Ki; Park, Soon Young

    1993-05-01

    Digital image processing technique is being actively studied since microprocessors and semiconductor memory devices have been developed in 1960's. Now image processing board for personal computer as well as image processing system for workstation is developed and widely applied to medical science, military, remote inspection, and nuclear industry. Image processing technology which provides computer system with vision ability not only recognizes nonobvious information but processes large information and therefore this technique is applied to various fields like remote measurement, object recognition and decision in adverse environment, and analysis of X-ray penetration image in nuclear facilities. In this report, various applications of image processing to nuclear facilities are examined, and image processing techniques are also analysed with the view of proposing the ideas for future applications. (Author)

  13. BUSINESS PROCESS MANAGEMENT SYSTEMS TECHNOLOGY COMPONENTS ANALYSIS

    Directory of Open Access Journals (Sweden)

    Andrea Giovanni Spelta

    2007-05-01

    Full Text Available The information technology that supports the implementation of the business process management appproach is called Business Process Management System (BPMS. The main components of the BPMS solution framework are process definition repository, process instances repository, transaction manager, conectors framework, process engine and middleware. In this paper we define and characterize the role and importance of the components of BPMS's framework. The research method adopted was the case study, through the analysis of the implementation of the BPMS solution in an insurance company called Chubb do Brasil. In the case study, the process "Manage Coinsured Events"" is described and characterized, as well as the components of the BPMS solution adopted and implemented by Chubb do Brasil for managing this process.

  14. Parametric Design within an Atomic Design Process (ADP) applied to Spacecraft Design

    Science.gov (United States)

    Ramos Alarcon, Rafael

    This thesis describes research investigating the development of a model for the initial design of complex systems, with application to spacecraft design. The design model is called an atomic design process (ADP) and contains four fundamental stages (specifications, configurations, trade studies and drivers) that constitute the minimum steps of an iterative process that helps designers find a feasible solution. Representative design models from the aerospace industry are reviewed and are compared with the proposed model. The design model's relevance, adaptability and scalability features are evaluated through a focused design task exercise with two undergraduate teams and a long-term design exercise performed by a spacecraft payload team. The implementation of the design model is explained in the context in which the model has been researched. This context includes the organization (a student-run research laboratory at the University of Michigan), its culture (academically oriented), members that have used the design model and the description of the information technology elements meant to provide support while using the model. This support includes a custom-built information management system that consolidates relevant information that is currently being used in the organization. The information is divided in three domains: personnel development history, technical knowledge base and laboratory operations. The focused study with teams making use of the design model to complete an engineering design exercise consists of the conceptual design of an autonomous system, including a carrier and a deployable lander that form the payload of a rocket with an altitude range of over 1000 meters. Detailed results from each of the stages of the design process while implementing the model are presented, and an increase in awareness of good design practices in the teams while using the model are explained. A long-term investigation using the design model consisting of the

  15. NASA System Engineering Design Process

    Science.gov (United States)

    Roman, Jose

    2011-01-01

    This slide presentation reviews NASA's use of systems engineering for the complete life cycle of a project. Systems engineering is a methodical, disciplined approach for the design, realization, technical management, operations, and retirement of a system. Each phase of a NASA project is terminated with a Key decision point (KDP), which is supported by major reviews.

  16. Designing Technology for Active Spectator Experiences at Sporting Events

    DEFF Research Database (Denmark)

    Veerasawmy, Rune; Ludvigsen, Martin

    2010-01-01

    is not merely an experience of receiving and consuming entertainment. It is also heavily reliant on the active participation of the spectator in creating the atmosphere of the entire event. The BannerBattle experiment provides interactive technology in sport arenas with a form of interaction based on existing......This paper explores the active spectator experience at sporting events, by presenting and reflecting upon a design experiment carried out at a number of football1 events. The initial hypothesis of the design process, leading to the design experiment has been that the spectator experience...... behaviour in the context. The work presented also argues for a need to overcome the inclination to designing technological systems that imitate or compete with the experience of watching the television broadcast of the game. Experiments such as the presented BannerBattle are cornerstones in our exploratory...

  17. Exploring novel food proteins and processing technologies

    NARCIS (Netherlands)

    Avila Ruiz, Geraldine

    2016-01-01

    Foods rich in protein are nowadays high in demand worldwide. To ensure a sustainable supply and a high quality of protein foods, novel food proteins and processing technologies need to be explored to understand whether they can be used for the development of high-quality protein foods. Therefore,

  18. Improvisation during Process-Technology Adoption

    DEFF Research Database (Denmark)

    Tjørnehøj, Gitte; Mathiassen, Lars

    2010-01-01

    Most software firms struggle to take advantage of the potential benefits of software process improvement (SPI) as they adopt this technology into the complex and dynamic realities of their day-to-day operation. Such efforts are therefore typically fluctuating between management's attempt to contr...

  19. Influence Processes for Information Technology Acceptance

    DEFF Research Database (Denmark)

    Bhattacherjee, Anol; Sanford, Clive Carlton

    2006-01-01

    This study examines how processes of external influence shape information technology acceptance among potential users, how such influence effects vary across a user population, and whether these effects are persistent over time. Drawing on the elaboration-likelihood model (ELM), we compared two...

  20. Graphic Design in Libraries: A Conceptual Process

    Science.gov (United States)

    Ruiz, Miguel

    2014-01-01

    Providing successful library services requires efficient and effective communication with users; therefore, it is important that content creators who develop visual materials understand key components of design and, specifically, develop a holistic graphic design process. Graphic design, as a form of visual communication, is the process of…

  1. Instructional Design Processes and Traditional Colleges

    Science.gov (United States)

    Vasser, Nichole

    2010-01-01

    Traditional colleges who have implemented distance education programs would benefit from using instructional design processes to develop their courses. Instructional design processes provide the framework for designing and delivering quality online learning programs in a highly-competitive educational market. Traditional college leaders play a…

  2. Development of Food Preservation and Processing Technologies by Radiation Technology

    International Nuclear Information System (INIS)

    Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun

    2007-07-01

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

  3. Development of Food Preservation and Processing Technologies by Radiation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun (and others)

    2007-07-15

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

  4. Designing Technology for Active Spectator Experiences at Sporting Events

    DEFF Research Database (Denmark)

    Veerasawmy, Rune; Ludvigsen, Martin

    This paper explores the active spectator experience at sporting events, by presenting and reflecting upon a design experiment carried out at a number of football1 events. The initial hypothesis of the design process, leading to the design experiment has been that the spectator experience...... is not merely an experience of receiving and consuming entertainment. It is also heavily reliant on the active participation of the spectator in creating the atmosphere of the entire event. The BannerBattle experiment provides interactive technology in sport arenas with a form of interaction based on existing...

  5. Designing Technology for Active Spectator Experiences at Sporting Events

    DEFF Research Database (Denmark)

    Ludvigsen, Martin; Veerasawmy, Rune

    2010-01-01

    This paper explores the active spectator experience at sporting events, by presenting and reflecting upon a design experiment carried out at a number of football1 events. The initial hypothesis of the design process, leading to the design experiment has been that the spectator experience...... is not merely an experience of receiving and consuming entertainment. It is also heavily reliant on the active participation of the spectator in creating the atmosphere of the entire event. The BannerBattle experiment provides interactive technology in sport arenas with a form of interaction based on existing...

  6. Energy conversion technology by chemical processes

    Energy Technology Data Exchange (ETDEWEB)

    Oh, I.W.; Yoon, K.S.; Cho, B.W. [Korea Inst. of Science and Technology, Seoul (Korea, Republic of)] [and others

    1996-12-01

    The sharp increase in energy usage according to the industry development has resulted in deficiency of energy resources and severe pollution problems. Therefore, development of the effective way of energy usage and energy resources of low pollution is needed. Development of the energy conversion technology by chemical processes is also indispensable, which will replace the pollutant-producing and inefficient mechanical energy conversion technologies. Energy conversion technology by chemical processes directly converts chemical energy to electrical one, or converts heat energy to chemical one followed by heat storage. The technology includes batteries, fuel cells, and energy storage system. The are still many problems on performance, safety, and manufacturing of the secondary battery which is highly demanded in electronics, communication, and computer industries. To overcome these problems, key components such as carbon electrode, metal oxide electrode, and solid polymer electrolyte are developed in this study, followed by the fabrication of the lithium secondary battery. Polymer electrolyte fuel cell, as an advanced power generating apparatus with high efficiency, no pollution, and no noise, has many applications such as zero-emission vehicles, on-site power plants, and military purposes. After fabricating the cell components and operating the single cells, the fundamental technologies in polymer electrolyte fuel cell are established in this study. Energy storage technology provides the safe and regular heat energy, irrespective of the change of the heat energy sources, adjusts time gap between consumption and supply, and upgrades and concentrates low grade heat energy. In this study, useful chemical reactions for efficient storage and transport are investigated and the chemical heat storage technology are developed. (author) 41 refs., 90 figs., 20 tabs.

  7. Biomimetic design processes in architecture: morphogenetic and evolutionary computational design

    International Nuclear Information System (INIS)

    Menges, Achim

    2012-01-01

    Design computation has profound impact on architectural design methods. This paper explains how computational design enables the development of biomimetic design processes specific to architecture, and how they need to be significantly different from established biomimetic processes in engineering disciplines. The paper first explains the fundamental difference between computer-aided and computational design in architecture, as the understanding of this distinction is of critical importance for the research presented. Thereafter, the conceptual relation and possible transfer of principles from natural morphogenesis to design computation are introduced and the related developments of generative, feature-based, constraint-based, process-based and feedback-based computational design methods are presented. This morphogenetic design research is then related to exploratory evolutionary computation, followed by the presentation of two case studies focusing on the exemplary development of spatial envelope morphologies and urban block morphologies. (paper)

  8. Biomimetic design processes in architecture: morphogenetic and evolutionary computational design.

    Science.gov (United States)

    Menges, Achim

    2012-03-01

    Design computation has profound impact on architectural design methods. This paper explains how computational design enables the development of biomimetic design processes specific to architecture, and how they need to be significantly different from established biomimetic processes in engineering disciplines. The paper first explains the fundamental difference between computer-aided and computational design in architecture, as the understanding of this distinction is of critical importance for the research presented. Thereafter, the conceptual relation and possible transfer of principles from natural morphogenesis to design computation are introduced and the related developments of generative, feature-based, constraint-based, process-based and feedback-based computational design methods are presented. This morphogenetic design research is then related to exploratory evolutionary computation, followed by the presentation of two case studies focusing on the exemplary development of spatial envelope morphologies and urban block morphologies.

  9. Improvisation during Process-Technology Adoption

    DEFF Research Database (Denmark)

    Tjørnehøj, Gitte; Mathiassen, Lars

    2010-01-01

    firm, SmallSoft, over a 10-year period (1996–2005). We found that micro-level and macro-level improvisations interacted, often in uncoordinated ways, to shape SPI technology adoption at SmallSoft. The improvisations enhanced employee creativity, motivation and empowerment, created momentum......Most software firms struggle to take advantage of the potential benefits of software process improvement (SPI) as they adopt this technology into the complex and dynamic realities of their day-to-day operation. Such efforts are therefore typically fluctuating between management's attempt to control...

  10. Computer Applications in the Design Process.

    Science.gov (United States)

    Winchip, Susan

    Computer Assisted Design (CAD) and Computer Assisted Manufacturing (CAM) are emerging technologies now being used in home economics and interior design applications. A microcomputer in a computer network system is capable of executing computer graphic functions such as three-dimensional modeling, as well as utilizing office automation packages to…

  11. Virtual Reality in Presentation of the Underground Mine Technological Process

    Directory of Open Access Journals (Sweden)

    Kodym Oldøich

    2003-09-01

    Full Text Available Virtual Reality in Presentation of the Underground Mine Technological Process focuses on methods of presentation of an underground mine technologies in intranet technology. It shows usage of platform independent VRML client for presentation of static and dynamic information about technological process. Bi-directional interactions between client and process information database are solved.Based on analysis of technological process of underground mine a database structure was designed. It is skeleton for storing all information about any underground mine. This skeleton can be modified in any direction. Data in this "static model" of underground mine can be applied for visualization in VRML environment. In this way it is possible to simplify and unify a user's front-end for all kinds of tasks.All designed scenes can be interactively displayed in full view or in any detail view, so that a user is able to recognize every important part of installed equipment, its stage, technical parameters and other information. If manufacturers of mining equipment will supply VRML model of their real products everybody would be able to place it into VRML scene and learn everything about it.This work explores and tries to enlighten some of the areas and available approaches compliant with VRML 97 specification of modifying static scene by its browser. Concepts of animation pipeline, inside and outside scripting in scene displayed and authoring of VRML targeted geometry are discussed including database connectivity.

  12. Design Process-System and Methodology of Design Research

    Science.gov (United States)

    Bashier, Fathi

    2017-10-01

    Studies have recognized the failure of the traditional design approach both in practice and in the studio. They showed that design problems today are too complex for the traditional approach to cope with and reflected a new interest in a better quality design services in order to meet the challenges of our time. In the mid-1970s and early 1980s, there has been a significant shift in focus within the field of design research towards the aim of creating a ‘design discipline’. The problem, as will be discussed, is the lack of an integrated theory of design knowledge that can explicitly describe the design process in a coherent way. As a consequence, the traditional approach fails to operate systematically, in a disciplinary manner. Addressing this problem is the primary goal of the research study in the design process currently being conducted in the research-based master studio at Wollega University, Ethiopia. The research study seeks to make a contribution towards a disciplinary approach, through proper understanding the mechanism of knowledge development within design process systems. This is the task of the ‘theory of design knowledge’. In this article the research project is introduced, and a model of the design process-system is developed in the studio as a research plan and a tool of design research at the same time. Based on data drawn from students’ research projects, the theory of design knowledge is developed and empirically verified through the research project.

  13. Development of design technology for system - integrated modular advanced react or (SMART) /technology support of NSSS design for SMART

    Energy Technology Data Exchange (ETDEWEB)

    Joon, Hah Yung; Kim, Kee Eun [KOPEC, Taejeon (Korea)

    2002-03-01

    SMART design concept is very different from that of the commercial PWRs, as the main components such as the steam generator, pressurizer, and the main coolant pumps are incorporate the related sub-part systems into the reactor vessel. In this report the design for SMART is the basic design stage and is the new design technology development task for the first trial in Korea. KOPEC NED has participated with Korea Atomic Energy Research Institute for the task of 'Development of Design Technology for SMART' as supporting sub-task of it. The system design (ECCS, Makeup and Purification System), mechanical design (Seismic Analysis, BLPB Analysis, Structural Analysis, Design Load Calculation, Stress Fatigue Evaluation, Fracture Mechanical and Structural Integrity Evaluation), MMIS design (Alarm and Indication System, Information Processing System, Large Display Panel, Human System Interface Guideline) have been performed as a basic design for SMART during 31 months (1999. 9.1{approx}2002.3.31). This report is the final one for the support of the main task of Korea Atomic Energy Research Institute. 124 refs., 154 figs., 97 tabs. (Author)

  14. Designing with video focusing the user-centred design process

    CERN Document Server

    Ylirisku, Salu Pekka

    2007-01-01

    Digital video for user-centered co-design is an emerging field of design, gaining increasing interest in both industry and academia. It merges the techniques and approaches of design ethnography, participatory design, interaction analysis, scenario-based design, and usability studies. This book covers the complete user-centered design project. It illustrates in detail how digital video can be utilized throughout the design process, from early user studies to making sense of video content and envisioning the future with video scenarios to provoking change with video artifacts. The text includes

  15. Building Design Guidelines for Solar Energy Technologies

    Science.gov (United States)

    Givoni, B.

    1989-01-01

    There are two main objectives to this publication. The first is to find out the communalities in the experience gained in previous studies and in actual applications of solar technologies in buildings, residential as well as nonresidential. The second objective is to review innovative concepts and products which may have an impact on future developments and applications of solar technologies in buildings. The available information and common lessons were collated and presented in a form which, hopefully, is useful for architects and solar engineers, as well as for teachers of "solar architecture" and students in Architectural Schools. The publication is based mainly on the collection and analysis of relevant information. The information included previous studies in which the performance of solar buildings was evaluated, as well as the personal experience of the Author and the research consultants. The state of the art, as indicated by these studies and personal experience, was summarized and has served as basis for the development of the Design Guidelines. In addition to the summary of the state of the art, as was already applied in solar buildings, an account was given of innovative concepts and products. Such innovations have occurred in the areas of thermal storage by Phase Change Materials (PCM) and in glazing with specialized or changeable properties. Interesting concepts were also developed for light transfer, which may enable to transfer sunlight to the core areas of large multi story nonresidential buildings. These innovations may have a significant impact on future developments of solar technologies and their applications in buildings.

  16. Additive manufacturing of metals the technology, materials, design and production

    CERN Document Server

    Yang, Li; Baughman, Brian; Godfrey, Donald; Medina, Francisco; Menon, Mamballykalathil; Wiener, Soeren

    2017-01-01

    This book offers a unique guide to the three-dimensional (3D) printing of metals. It covers various aspects of additive, subtractive, and joining processes used to form three-dimensional parts with applications ranging from prototyping to production. Examining a variety of manufacturing technologies and their ability to produce both prototypes and functional production-quality parts, the individual chapters address metal components and discuss some of the important research challenges associated with the use of these technologies. As well as exploring the latest technologies currently under development, the book features unique sections on electron beam melting technology, material lifting, and the importance this science has in the engineering context. Presenting unique real-life case studies from industry, this book is also the first to offer the perspective of engineers who work in the field of aerospace and transportation systems, and who design components and manufacturing networks. Written by the leadin...

  17. The vacuum system for technological unit development and design

    International Nuclear Information System (INIS)

    Zhukeshov, A M; Gabdullina, A T; Amrenova, A U; Giniyatova, Sh G; Kaibar, A; Sundetov, A; Fermakhan, K

    2015-01-01

    The paper shows results of development of plasma technological unit on the basis of accelerator of vacuum arc and automated system. During the previous years, the authors investigated the operation of pulsed plasma accelerator and developed unique technologies for hardening of materials. Principles of plasma formation in pulsed plasma accelerator were put into basis of the developed unit. Operation of the pulsed arc accelerator was investigated at different parameters of the charge. The developed vacuum system is designed for production of hi-tech plasma units in high technologies in fields of nanomaterials, mechanical and power engineering and production with high added value. Unlike integrated solutions, the system is a module one to allow its low cost, high reliability and simple maintenance. The problems of use of robots are discussed to modernize the technological process. (paper)

  18. Control of processes using isotopic diagnostic's technologies

    International Nuclear Information System (INIS)

    Vargas, Celso; Chaverri, Oscar; Chine, Bruno; Conejo, Mario

    2005-01-01

    The Escuela de Ciencias e Ingenieria de los Materiales of the Instituto Tecnologico de Costa Rica, in cooperation with OIEA, develops a project of dowry of capacity oriented to the formation of professionals and equipment for the use of two important technologies of isotopic diagnostic. The first of them is the technology of tracers that operates the unique properties that present different radioactive isotopics like open sources. The second one well known as scanning or profile gamma, uses sealed source, of the some nature that the previous ones, to obtain profiles in different processes and thus to determine its internal condition and operation. The objective of this article is to present both technologies, its benefits and to promote the use in the country [es

  19. Facilitating Teamwork in the Design Process

    DEFF Research Database (Denmark)

    Bang, Anne Louise; Nissen, Kirsten

    2009-01-01

    By approaching the Repertory Grid as an exploratory design game and drawing on insight in diagrammatic reasoning we argue that this approach is useful in supporting team work in the design process. In this paper we draw on two courses inviting textile design students to contribute to the developm......By approaching the Repertory Grid as an exploratory design game and drawing on insight in diagrammatic reasoning we argue that this approach is useful in supporting team work in the design process. In this paper we draw on two courses inviting textile design students to contribute...

  20. Industrial best practices of conceptual process design

    NARCIS (Netherlands)

    Harmsen, G.J.

    2004-01-01

    The chemical process industry aims particularly at energy, capital expenditure and variable feedstock cost savings due to fierce global competition, the Kyoto Protocol and requirements for sustainable development. Increasingly conceptual process design methods are used in the industry to achieve

  1. Design for experience where technology meets design and strategy

    CERN Document Server

    Kim, Jinwoo

    2015-01-01

    Presents a strategic perspective and design methodology that guide the process of developing digital products and services that provide 'real experience' to users. Only when the material experienced runs its course to fulfilment is it then regarded as 'real experience' that is distinctively senseful, evaluated as valuable, and harmoniously related to others. Based on the theoretical background of human experience, the book focuses on these three questions: How can we understand the current dominant designs of digital products and services? What are the user experience factor

  2. Initial design process of the repository

    International Nuclear Information System (INIS)

    Osmanlioglu, A.E.

    2001-01-01

    The concept of the final disposal of high level wastes is to isolate the waste from the biosphere for extremely long periods of time by emplacement of wastes into deep stable geological formations. Several geological formations have been considered as candidate host environments for high level waste disposal and several techniques have been developed for repository design. In this study, interrelationships of main parameters of a general repository design have been defined and effective parameters are shown at each step. Initial design process is based on the long term stability of underground openings as disposal galleries. For this reason, this design process includes two main analyses: mechanical analysis and thermal analysis. Each of the analysis systems is directly related to each other by technical precautions. As a result of this design process, general information about the acceptable depth of the repository, layout and emplacement pattern can be taken. Final design study can be established on the result of initial design process. (author)

  3. Conceptual Design of Industrial Process Displays

    DEFF Research Database (Denmark)

    Pedersen, C.R.; Lind, Morten

    1999-01-01

    Today, process displays used in industry are often designed on the basis of piping and instrumentation diagrams without any method of ensuring that the needs of the operators are fulfilled. Therefore, a method for a systematic approach to the design of process displays is needed. This paper...... discusses aspects of process display design taking into account both the designer's and the operator's points of view. Three aspects are emphasized: the operator tasks, the display content and the display form. The distinction between these three aspects is the basis for proposing an outline for a display...... design method that matches the industrial practice of modular plant design and satisfies the needs of reusability of display design solutions. The main considerations in display design in the industry are to specify the operator's activities in detail, to extract the information the operators need from...

  4. The Plasma Hearth Process Technology Development Project

    International Nuclear Information System (INIS)

    Geimer, R.; Batdorf, J.; Wolfe, P.

    1993-01-01

    The US DOE Office of Technology Development (OTD) is currently evaluating the Plasma Hearth Process (PHP) for potential treatment of several DOE waste types. The PHP is a high-temperature vitrification process that has potential application for a wide range of mixed waste types in both the low-level and transuranic mixed waste categories. The PHP is being tested under both the OTD Mixed Waste Integrated Program and the Buried Waste Integrated Demonstration. Initial testing has been completed on several different surrogate waste forms that are representative of some of the DOE mixed waste streams. Destruction of organic material exceeds that of conventional incineration technologies. The vitrified residual has leaching characteristics comparable to glass formulations produced in the high-level waste program. The first phase of the PHP demonstration project has been successfully completed, and the project is currently beginning a comprehensive second phase of development and testing

  5. Practicing universal design to actual hand tool design process.

    Science.gov (United States)

    Lin, Kai-Chieh; Wu, Chih-Fu

    2015-09-01

    UD evaluation principles are difficult to implement in product design. This study proposes a methodology for implementing UD in the design process through user participation. The original UD principles and user experience are used to develop the evaluation items. Difference of product types was considered. Factor analysis and Quantification theory type I were used to eliminate considered inappropriate evaluation items and to examine the relationship between evaluation items and product design factors. Product design specifications were established for verification. The results showed that converting user evaluation into crucial design verification factors by the generalized evaluation scale based on product attributes as well as the design factors applications in product design can improve users' UD evaluation. The design process of this study is expected to contribute to user-centered UD application. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  6. Developing technological process of obtaining giality casts

    Directory of Open Access Journals (Sweden)

    A. Issagulov

    2014-10-01

    Full Text Available The article considers the process of manufacturing castings using sand-resin forms and alloying furnace. Were the optimal technological parameters of manufacturing shell molds for the manufacture of castings of heating equipment. Using the same upon receipt of castings by casting in shell molds furnace alloying and deoxidation of the metal will provide consumers with quality products and have a positive impact on the economy in general engineering.

  7. Similarity search processing. Paralelization and indexing technologies.

    Directory of Open Access Journals (Sweden)

    Eder Dos Santos

    2015-08-01

    The next Scientific-Technical Report addresses the similarity search and the implementation of metric structures on parallel environments. It also presents the state of the art related to similarity search on metric structures and parallelism technologies. Comparative analysis are also proposed, seeking to identify the behavior of a set of metric spaces and metric structures over processing platforms multicore-based and GPU-based.

  8. Computer-Aided Modeling of Lipid Processing Technology

    DEFF Research Database (Denmark)

    Diaz Tovar, Carlos Axel

    2011-01-01

    increase along with growing interest in biofuels, the oleochemical industry faces in the upcoming years major challenges in terms of design and development of better products and more sustainable processes to make them. Computer-aided methods and tools for process synthesis, modeling and simulation...... are widely used for design, analysis, and optimization of processes in the chemical and petrochemical industries. These computer-aided tools have helped the chemical industry to evolve beyond commodities toward specialty chemicals and ‘consumer oriented chemicals based products’. Unfortunately...... to develop systematic computer-aided methods (property models) and tools (database) related to the prediction of the necessary physical properties suitable for design and analysis of processes employing lipid technologies. The methods and tools include: the development of a lipid-database (CAPEC...

  9. Digital signal processing - growth of a technology

    International Nuclear Information System (INIS)

    Peek, J.B.H.

    1985-01-01

    The rapid development of microelectronics has led to an increasing extent in circuits and systems for digital signal processing. This happened first in professional applications, e.g. geophysics, astronomy and space flight, and now, with the Compact Disc player, these techniques have entered the consumer field. In the near future digital TV applications will undoubtedly follow. This article outlines a number of the developments behind the advancing 'digitization' of modern technology. The article also considers the main advantages and disadvantages of digital signal processing the main modules now used and some common applications. Particular attention is paid to medical applications. (Auth.)

  10. Radiation processing: a versatile technology for industry

    International Nuclear Information System (INIS)

    Cabalfin, E.G.

    1996-01-01

    Soon after the discovery of x-ray in 1895 and radioactivity in 1896, it was recognized that ionizing radiation can modify the chemical, physical and/or biological properties of materials. However, it was only in the late 50's, when large radiation sources become available, has this unique property of radiation found industrial applications in radiation processing. Today, radiation processing has been used by industry in such diverse applications, such as radiation sterilization/decontamination of medical products, pharmaceuticals, cosmetics and their raw materials; radiation cross-linking of wire and cable insulation; production of heat shrinkable materials and polymer foam; and radiation curing of coatings, adhesives and inks on a wide variety of substrates. In addition to being a clean environment-friendly technology, radiation processing can also be used for the conservation of the environment by such processes as radiation treatment of flue gases to remove SO 2 and NO x and disinfection of sewage sludge. Because of the many advantages offered by radiation processing, industry is showing strong interest in the technology as evidenced by the growing number of industrial radiation facilities in many countries. (author)

  11. Teachers as Participatory Designers: Two Case Studies with Technology-Enhanced Learning Environments

    Science.gov (United States)

    Cober, Rebecca; Tan, Esther; Slotta, Jim; So, Hyo-Jeong; Könings, Karen D.

    2015-01-01

    Teachers are not typically involved as participatory designers in the design of technology-enhanced learning environments. As they have unique and valuable perspectives on the role of technology in education, it is of utmost importance to engage them in a participatory design process. Adopting a case study methodology, we aim to reveal in what…

  12. Thermodynamics for separation-process technology

    Energy Technology Data Exchange (ETDEWEB)

    Prausnitz, J.M.

    1995-10-01

    When contemplating or designing a separation process, every chemical engineer at once recognizes the thermodynamic boundary conditions that must be satisfied: when a mixture is continuously processed to yield at least partially purified products, energy and mass must be conserved and work must be done. In his daily tasks, a chemical engineer uses thermodynamic concepts as tacit, almost subconscious, knowledge. Thus, qualitative thermodynamics significantly informs process conception at its most fundamental level. However, quantitative design requires detailed knowledge of thermodynamic relations and physical chemistry. Most process engineers, concerned with flow sheets and economics, cannot easily command that detailed knowledge and therefore it is advantageous for them to maintain close contact with those specialists who do. Quantitative chemical thermodynamics provides an opportunity to evaluate possible separation processes not only because it may give support to the process engineer`s bold imagination but also because, when coupled with molecular models, it can significantly reduce the experimental effort required to determine an optimum choice of process alternatives. Six examples are presented to indicate the application of thermodynamics for conventional and possible future separation processes.

  13. Facilitating Teamwork in the Design Process

    DEFF Research Database (Denmark)

    Bang, Anne Louise; Nissen, Kirsten

    2009-01-01

    By approaching the Repertory Grid as an exploratory design game and drawing on insight in diagrammatic reasoning we argue that this approach is useful in supporting team work in the design process. In this paper we draw on two courses inviting textile design students to contribute to the developm...

  14. Managing Constraint Generators in Retail Design Processes

    DEFF Research Database (Denmark)

    Münster, Mia Borch; Haug, Anders

    case studies of fashion store design projects, the present paper addresses this gap. The and six case studies of fashion store design projects, the present paper sheds light on the types of constraints generated by the relevant constraint generators. The paper shows that in the cases studied......, the influence of the constraints generated by these constraint generators decreased during the design process except for supplier-generated constraints, which increased in the final stages of the design process. The paper argues that a thorough design preparation phase would be beneficial, and that constraints...

  15. Assessment and Development of Engineering Design Processes

    DEFF Research Database (Denmark)

    Ulrikkeholm, Jeppe Bjerrum

    process, which is not simply understood. A main proposition in this research project is that understanding an engineering design process fully requires understanding of the product being engineered. Only by understanding what product features are used and produced in every engineering design task...... the process can be fully understood and eventually improved. Taking its starting point in this proposition, the outcome of the research is an operational 5-phased procedure for assessing and developing engineering design processes through integrated modelling of product and process, designated IPPM...... of the research, and the main conclusions will be presented throughout this thesis. In addition to this, the results are placed in a more holistic context as the theoretical and empirical backgrounds of the project are elaborated. Furthermore the research design and scientific approaches are described in details...

  16. PROPOSAL OF SPATIAL OPTIMIZATION OF PRODUCTION PROCESS IN PROCESS DESIGNER

    Directory of Open Access Journals (Sweden)

    Peter Malega

    2015-03-01

    Full Text Available This contribution is focused on optimizing the use of space in the production process using software Process Designer. The aim of this contribution is to suggest possible improvements to the existing layout of the selected production process. Production process was analysed in terms of inputs, outputs and course of actions. Nowadays there are many software solutions aimed at optimizing the use of space. One of these software products is the Process Designer, which belongs to the product line Tecnomatix. This software is primarily aimed at production planning. With Process Designer is possible to design the layout of production and subsequently to analyse the production or to change according to the current needs of the company.

  17. Engaging, Designing and Making Digital Technologies

    DEFF Research Database (Denmark)

    Vertesi, Janet; Ribes, David; Forlano, Laura

    2017-01-01

    Science and Technology Studies (STS) is a flourishing interdisciplinary field that examines the transformative power of science and technology to arrange and rearrange contemporary societies. The Handbook of Science and Technology Studies provides a comprehensive and authoritative overview...

  18. Building design guidelines for solar energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Givoni, B.

    1989-01-01

    There are two main objectives to this publication. The first is to find out the communalities in the experience gained in previous studies and in actual applications of solar technologies in buildings, residential as well as nonresidential. The second objective is to review innovative concepts and products which may have an impact on future developments and applications of solar technologies in buildings. The available information and common lessons were collated and presented in a form which, hopefully, is useful for architects and solar engineers, as well as for teachers of solar architecture'' and students in Architectural Schools. The publication is based mainly on the collection and analysis of relevant information. The information included previous studies in which the performance of solar buildings was evaluated, as well as the personal experience of the Author and the research consultants. The state of the art, as indicated by these studies and personal experience, was summarized and has served as basis for the development of the Design Guidelines. In addition to the summary of the state of the art, as was already applied in solar buildings, an account was given of innovative concepts and products. Such innovations have occurred in the areas of thermal storage by Phase Change Materials (PCM) and in glazing with specialized or changeable properties. Interesting concepts were also developed for light transfer, which may enable to transfer sunlight to the core areas of large multi story nonresidential buildings. These innovations may have a significant impact on future developments of solar technologies and their applications in buildings. 15 refs., 19 figs., 3 tabs.

  19. Variant Designing in the Preliminary Small Ship Design Process

    Directory of Open Access Journals (Sweden)

    Karczewski Artur

    2017-06-01

    Full Text Available Ship designing is a complex process, as the ship itself is a complex, technical multi-level object which operates in the air/water boundary environment and is exposed to the action of many different external and internal factors resulting from the adopted technical solutions, type of operation, and environmental conditions. A traditional ship design process consists of a series of subsequent multistage iterations, which gradually increase the design identification level. The paper presents problems related to the design of a small untypical vessel with the aid of variant methodology making use of optimisation algorithms. The computer-aided design methodology has been developed which does not need permanent reference to already built real ships and empirical-statistical relations. Possibilities were indicated for integrating together early design stages, and parallel designing of hull shape and parameters.

  20. Optimal screening designs for biomedical technology

    Energy Technology Data Exchange (ETDEWEB)

    Torney, D.C.; Bruno, W.J.; Knill, E. [and others

    1997-10-01

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). Screening a large number of different types of molecules to isolate a few with desirable properties is essential in biomedical technology. For example, trying to find a particular gene in the Human genome could be akin to looking for a needle in a haystack. Fortunately, testing of mixtures, or pools, of molecules allows the desirable ones to be identified, using a number of experiments proportional only to the logarithm of the total number of experiments proportional only to the logarithm of the total number of types of molecules. We show how to capitalize upon this potential by using optimize pooling schemes, or designs. We propose efficient non-adaptive pooling designs, such as {open_quotes}random sets{close_quotes} designs and modified {open_quotes}row and column{close_quotes} designs. Our results have been applied in the pooling and unique-sequence screening of clone libraries used in the Human Genome Project and in the mapping of Human chromosome 16. This required the use of liquid-transferring robots and manifolds--for the largest clone libraries. Finally, we developed an efficient technique for finding the posterior probability each molecule has the desirable property, given the pool assay results. This technique works well, in practice, even if there are substantial rates of errors in the pool assay data. Both our methods and our results are relevant to a broad spectrum of research in modern biology.

  1. Advanced Technologies for Design Information Verification

    Energy Technology Data Exchange (ETDEWEB)

    Watkins, Michael L.; Sheen, David M.; Rose, Joseph L.; Cumblidge, Stephen E.

    2009-07-08

    This paper discusses several technologies that have the potential to enhance facilities design verification. These approaches have shown promise in addressing the challenges associated with the verification of sub-component geometry and material composition for structures that are not directly accessible for physical inspection. A simple example is a pipe that extends into or through a wall or foundation. Both advanced electromagnetic and acoustic modalities will be discussed. These include advanced radar imaging, transient thermographic imaging, and guided acoustic wave imaging. Examples of current applications are provided. The basic principles and mechanisms of these inspection techniques are presented along with the salient practical features, advantages, and disadvantages of each technique. Other important considerations, such as component geometries, materials, and degree of access are also treated. The importance of, and strategies for, developing valid inspection models are also discussed. Beyond these basic technology adaptation and evaluation issues, important user interface considerations are outlined, along with approaches to quantify the overall performance reliability of the various inspection methods.

  2. Advanced Technologies for Design Information Verification

    International Nuclear Information System (INIS)

    Watkins, Michael L.; Sheen, David M.; Rose, Joseph L.; Cumblidge, Stephen E.

    2009-01-01

    This paper discusses several technologies that have the potential to enhance facilities design verification. These approaches have shown promise in addressing the challenges associated with the verification of sub-component geometry and material composition for structures that are not directly accessible for physical inspection. A simple example is a pipe that extends into or through a wall or foundation. Both advanced electromagnetic and acoustic modalities will be discussed. These include advanced radar imaging, transient thermographic imaging, and guided acoustic wave imaging. Examples of current applications are provided. The basic principles and mechanisms of these inspection techniques are presented along with the salient practical features, advantages, and disadvantages of each technique. Other important considerations, such as component geometries, materials, and degree of access are also treated. The importance of, and strategies for, developing valid inspection models are also discussed. Beyond these basic technology adaptation and evaluation issues, important user interface considerations are outlined, along with approaches to quantify the overall performance reliability of the various inspection methods.

  3. Robotic inspection technology-process an toolbox

    Energy Technology Data Exchange (ETDEWEB)

    Hermes, Markus [ROSEN Group (United States). R and D Dept.

    2005-07-01

    Pipeline deterioration grows progressively with ultimate aging of pipeline systems (on-plot and cross country). This includes both, very localized corrosion as well as increasing failure probability due to fatigue cracking. Limiting regular inspecting activities to the 'scrapable' part of the pipelines only, will ultimately result into a pipeline system with questionable integrity. The confidence level in the integrity of these systems will drop below acceptance levels. Inspection of presently un-inspectable sections of the pipeline system becomes a must. This paper provides information on ROSEN's progress on the 'robotic inspection technology' project. The robotic inspection concept developed by ROSEN is based on a modular toolbox principle. This is mandatory. A universal 'all purpose' robot would not be reliable and efficient in resolving the postulated inspection task. A preparatory Quality Function Deployment (QFD) analysis is performed prior to the decision about the adequate robotic solution. This enhances the serviceability and efficiency of the provided technology. The word 'robotic' can be understood in its full meaning of Recognition - Strategy - Motion - Control. Cooperation of different individual systems with an established communication, e.g. utilizing Bluetooth technology, support the robustness of the ROSEN robotic inspection approach. Beside the navigation strategy, the inspection strategy is also part of the QFD process. Multiple inspection technologies combined on a single carrier or distributed across interacting container must be selected with a clear vision of the particular goal. (author)

  4. Sustaining high energy efficiency in existing processes with advanced process integration technology

    International Nuclear Information System (INIS)

    Zhang, Nan; Smith, Robin; Bulatov, Igor; Klemeš, Jiří Jaromír

    2013-01-01

    Highlights: ► Process integration with better modelling and more advanced solution methods. ► Operational changes for better environmental performance through optimisation. ► Identification of process integration technology for operational optimisation. ► Systematic implementation procedure of process integration technology. ► A case study with crude oil distillation to demonstrate the operational flexibility. -- Abstract: To reduce emissions in the process industry, much emphasis has been put on making step changes in emission reduction, by developing new process technology and making renewable energy more affordable. However, the energy saving potential of existing systems cannot be simply ignored. In recent years, there have been significant advances in process integration technology with better modelling techniques and more advanced solution methods. These methods have been applied to the new design and retrofit studies in the process industry. Here attempts are made to apply these technologies to improve the environmental performance of existing facilities with operational changes. An industrial project was carried out to demonstrate the importance and effectiveness of exploiting the operational flexibility for energy conservation. By applying advanced optimisation technique to integrate the operation of distillation and heat recovery in a crude oil distillation unit, the energy consumption was reduced by 8% without capital expenditure. It shows that with correctly identified technology and the proper execution procedure, significant energy savings and emission reduction can be achieved very quickly without major capital expenditure. This allows the industry to improve its economic and environment performance at the same time.

  5. Integrated Design Process in Problem-Based Learning

    DEFF Research Database (Denmark)

    Knudstrup, Mary-Ann

    2004-01-01

    This article reports and reflects on the learning achievements and the educational experiences in connection with the first years of the curriculum in Architecture at Aalborg University ?s Civil Engineer Education in Architecture & Design. In the article I will focus on the learning activity...... and the method that are developed during the semester when working with an Integrated Design Process combining architecture, design, functional aspects, energy consumption, indoor environment, technology, and construction. I will emphasize the importance of working with different tools in the design process, e.......g. the computer as a tool for designing and optimising the building. I will also consider the dilemma of the Integrated Design Process in Problem Based Learning that emerges when the number of courses in the learning model, as is often the case, clashes with the demand for time and scope for reflection which...

  6. Lipid Processing Technology: Building a Multilevel Modeling Network

    DEFF Research Database (Denmark)

    Díaz Tovar, Carlos Axel; Mustaffa, Azizul Azri; Mukkerikar, Amol

    2011-01-01

    of a master parameter table; iii) development of a model library consisting of new and adopted process models of unit operations involved in lipid processing technologies, validation of the developed models using operating data collected from existing process plants, and application of validated models......The aim of this work is to present the development of a computer aided multilevel modeling network for the systematic design and analysis of processes employing lipid technologies. This is achieved by decomposing the problem into four levels of modeling: i) pure component property modeling...... and a lipid-database of collected experimental data from industry and generated data from validated predictive property models, as well as modeling tools for fast adoption-analysis of property prediction models; ii) modeling of phase behavior of relevant lipid mixtures using the UNIFACCI model, development...

  7. The Contextualized Technology Adaptation Process (CTAP): Optimizing Health Information Technology to Improve Mental Health Systems

    Science.gov (United States)

    Lyon, Aaron R.; Wasse, Jessica Knaster; Ludwig, Kristy; Zachry, Mark; Bruns, Eric J.; Unützer, Jürgen; McCauley, Elizabeth

    2015-01-01

    Health information technologies have become a central fixture in the mental healthcare landscape, but few frameworks exist to guide their adaptation to novel settings. This paper introduces the Contextualized Technology Adaptation Process (CTAP) and presents data collected during Phase 1 of its application to measurement feedback system development in school mental health. The CTAP is built on models of human-centered design and implementation science and incorporates repeated mixed methods assessments to guide the design of technologies to ensure high compatibility with a destination setting. CTAP phases include: (1) Contextual evaluation, (2) Evaluation of the unadapted technology, (3) Trialing and evaluation of the adapted technology, (4) Refinement and larger-scale implementation, and (5) Sustainment through ongoing evaluation and system revision. Qualitative findings from school-based practitioner focus groups are presented, which provided information for CTAP Phase 1, contextual evaluation, surrounding education sector clinicians’ workflows, types of technologies currently available, and influences on technology use. Discussion focuses on how findings will inform subsequent CTAP phases, as well as their implications for future technology adaptation across content domains and service sectors. PMID:25677251

  8. The Contextualized Technology Adaptation Process (CTAP): Optimizing Health Information Technology to Improve Mental Health Systems.

    Science.gov (United States)

    Lyon, Aaron R; Wasse, Jessica Knaster; Ludwig, Kristy; Zachry, Mark; Bruns, Eric J; Unützer, Jürgen; McCauley, Elizabeth

    2016-05-01

    Health information technologies have become a central fixture in the mental healthcare landscape, but few frameworks exist to guide their adaptation to novel settings. This paper introduces the contextualized technology adaptation process (CTAP) and presents data collected during Phase 1 of its application to measurement feedback system development in school mental health. The CTAP is built on models of human-centered design and implementation science and incorporates repeated mixed methods assessments to guide the design of technologies to ensure high compatibility with a destination setting. CTAP phases include: (1) Contextual evaluation, (2) Evaluation of the unadapted technology, (3) Trialing and evaluation of the adapted technology, (4) Refinement and larger-scale implementation, and (5) Sustainment through ongoing evaluation and system revision. Qualitative findings from school-based practitioner focus groups are presented, which provided information for CTAP Phase 1, contextual evaluation, surrounding education sector clinicians' workflows, types of technologies currently available, and influences on technology use. Discussion focuses on how findings will inform subsequent CTAP phases, as well as their implications for future technology adaptation across content domains and service sectors.

  9. Semantic Service Design for Collaborative Business Processes in Internetworked Enterprises

    Science.gov (United States)

    Bianchini, Devis; Cappiello, Cinzia; de Antonellis, Valeria; Pernici, Barbara

    Modern collaborating enterprises can be seen as borderless organizations whose processes are dynamically transformed and integrated with the ones of their partners (Internetworked Enterprises, IE), thus enabling the design of collaborative business processes. The adoption of Semantic Web and service-oriented technologies for implementing collaboration in such distributed and heterogeneous environments promises significant benefits. IE can model their own processes independently by using the Software as a Service paradigm (SaaS). Each enterprise maintains a catalog of available services and these can be shared across IE and reused to build up complex collaborative processes. Moreover, each enterprise can adopt its own terminology and concepts to describe business processes and component services. This brings requirements to manage semantic heterogeneity in process descriptions which are distributed across different enterprise systems. To enable effective service-based collaboration, IEs have to standardize their process descriptions and model them through component services using the same approach and principles. For enabling collaborative business processes across IE, services should be designed following an homogeneous approach, possibly maintaining a uniform level of granularity. In the paper we propose an ontology-based semantic modeling approach apt to enrich and reconcile semantics of process descriptions to facilitate process knowledge management and to enable semantic service design (by discovery, reuse and integration of process elements/constructs). The approach brings together Semantic Web technologies, techniques in process modeling, ontology building and semantic matching in order to provide a comprehensive semantic modeling framework.

  10. Radioisotopes technology used to probe process problems

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    With the move to a greater degree of sophistication in industrial processes has come a need for improved measurement control methods as well as for efficient techniques for investigating process problems. Radioisotope-based technology, because of its unique benefits, is playing an increasing role in assisting mining and industry to satisfy the critical needs for efficiency in investigating process problems. More than twenty years of experience in the application of radioisotope and radiation techniques to the practical problems of industry has resulted in the Atomic Energy Corporation of South Africa having accumulated both extensive expertise and the facilities to carry out wide-ranging investigations, and to provide a large variety of cost effective services. Some of these are described. 2 figs., 2 ills

  11. A Research Review on the Key Technologies of Intelligent Design for Customized Products

    Directory of Open Access Journals (Sweden)

    Shuyou Zhang

    2017-10-01

    Full Text Available The development of technologies such as big data and cyber-physical systems (CPSs has increased the demand for product design. Product digital design involves completing the product design process using advanced digital technologies such as geometry modeling, kinematic and dynamic simulation, multi-disciplinary coupling, virtual assembly, virtual reality (VR, multi-objective optimization (MOO, and human-computer interaction. The key technologies of intelligent design for customized products include: a description and analysis of customer requirements (CRs, product family design (PFD for the customer base, configuration and modular design for customized products, variant design for customized products, and a knowledge push for product intelligent design. The development trends in intelligent design for customized products include big-data-driven intelligent design technology for customized products and customized design tools and applications. The proposed method is verified by the design of precision computer numerical control (CNC machine tools.

  12. ANALYSIS ON TECHNOLOGICAL PROCESSES CLEANING OIL PIPELINES

    Directory of Open Access Journals (Sweden)

    Mariana PǍTRAŞCU

    2015-05-01

    Full Text Available In this paper the researches are presented concerning the technological processes of oil pipelines.We know several technologies and materials used for cleaning the sludge deposits, iron and manganese oxides, dross, stone, etc.de on the inner walls of drinking water pipes or industries.For the oil industry, methods of removal of waste materials and waste pipes and liquid and gas transport networks are operations known long, tedious and expensive. The main methods and associated problems can be summarized as follows: 1 Blowing with compressed air.2 manual or mechanical brushing, sanding with water or dry.3 Wash with water jet of high pressure, solvent or chemical solution to remove the stone and hard deposits.4 The combined methods of cleaning machines that use water jets, cutters, chains, rotary heads cutters, etc.

  13. Structures and Processes in Didactic Design

    DEFF Research Database (Denmark)

    Helms, Niels Henrik; Heilesen, Simon

    2012-01-01

    This paper introduces a user-driven approach to designing new educational formats including new media for learning. Focus will be on didactic design involving the use of information technology as a means of mediating, augmenting or even fundamentally changing teaching and learning practices. The ....... The two key points in the article are the introduction of a Quadrant-Model, and the understanding of the user as a construction....

  14. Structures and Processes in Didactic Design

    DEFF Research Database (Denmark)

    Helms, Niels Henrik; Heilesen, Simon

    This paper introduces a user-driven approach to designing new educational formats including new media for learning. Focus will be on didactic design involving the use of information technology as a means of mediating, augmenting or even fundamentally changing teaching and learning practices. The ....... The two key points in the article are the introduction of a Quadrant-Model, and the understanding of the user as a construction....

  15. Designing reactive distillation processes with improved efficiency

    NARCIS (Netherlands)

    Almeida-Rivera, C.P.

    2005-01-01

    In this dissertation a life-span inspired perspective is taken on the conceptual design of grassroots reactive distillation processes. Attention was paid to the economic performance of the process and to potential losses of valuable resources over the process life span. The research was cast in a

  16. TECHNOLOGICAL PROCESS MODELING AIMING TO IMPROVE ITS OPERATIONS MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Ivan Mihajlović

    2011-11-01

    Full Text Available This paper presents the modeling procedure of one real technological system. In this study, thecopper extraction from the copper flotation waste generated at the Bor Copper Mine (Serbia, werethe object of modeling. Sufficient data base for statistical modeling was constructed using theorthogonal factorial design of the experiments. Mathematical model of investigated system wasdeveloped using the combination of linear and multiple linear statistical analysis approach. Thepurpose of such a model is obtaining optimal states of the system that enable efficient operationsmanagement. Besides technological and economical, ecological parameters of the process wereconsidered as crucial input variables.

  17. [Mechanized system for planning technological processes].

    Science.gov (United States)

    Pashchenko, V S; Shapiro, A M

    1977-01-01

    A mechanized system for the production processes planning involving the use of an electronic code device for data preparation on a punched tape of the "EPECT-IT" type, at the base of which there are classifiers of standard operations and transitions to individual design members, is considered. A fragment of the classifier and a skeleton diagram of the system are presented. It is pointed out that the use of the system helps improve the quality of the design work, as well as to yield considerable economic advantages. The system is in operation at some enterprises of the medical engineering industry.

  18. Multidisciplinary systems engineering architecting the design process

    CERN Document Server

    Crowder, James A; Demijohn, Russell

    2016-01-01

    This book presents Systems Engineering from a modern, multidisciplinary engineering approach, providing the understanding that all aspects of systems design, systems, software, test, security, maintenance and the full life-cycle must be factored in to any large-scale system design; up front, not factored in later. It lays out a step-by-step approach to systems-of-systems architectural design, describing in detail the documentation flow throughout the systems engineering design process. It provides a straightforward look and the entire systems engineering process, providing realistic case studies, examples, and design problems that will enable students to gain a firm grasp on the fundamentals of modern systems engineering.  Included is a comprehensive design problem that weaves throughout the entire text book, concluding with a complete top-level systems architecture for a real-world design problem.

  19. REVERSING THE CO-DESIGN PROCESS

    DEFF Research Database (Denmark)

    Lundsgaard, Christina

    2011-01-01

    Visual tools such as probes and design games are used during co-design events to facilitate a common design dialogue. They evoke new ideas and invite users, designers and other stakeholders to explore and rehearse future opportunities. This "toolkit" and working practices are continually evolving......, but the focus is almost always on the upcoming design. Based on an experiment, this paper investigates how co-design tools can be used as a part of a post-occupancy evaluation (POE). When you do a POE, you evaluate the performance of an already completed building in relation to the daily use. Unlike...... a traditional codesign process the POE looks back on the process in order to adjust or redesign the building. The paper argues that co-design tools can be an instrument to make architects and other stakeholders reflect on the project once again in order to see it from a different perspective....

  20. Design Process Improvement for Electric CAR Harness

    Science.gov (United States)

    Sawatdee, Thiwarat; Chutima, Parames

    2017-06-01

    In an automobile parts design company, the customer satisfaction is one of the most important factors for product design. Therefore, the company employs all means to focus its product design process based on the various requirements of customers resulting in high number of design changes. The objective of this research is to improve the design process of the electric car harness that effects the production scheduling by using Fault Tree Analysis (FTA) and Failure Mode and Effect Analysis (FMEA) as the main tools. FTA is employed for root cause analysis and FMEA is used to ranking a High Risk Priority Number (RPN) which is shows the priority of factors in the electric car harness that have high impact to the design of the electric car harness. After the implementation, the improvements are realized significantly since the number of design change is reduced from 0.26% to 0.08%.

  1. Technological yields of sources for radiation processing

    International Nuclear Information System (INIS)

    Zagorski, Z.P.

    1993-01-01

    The present report is prepared for planners of radiation processing of any material. Calculations are focused on accelerators of electrons, divided into two groups: versatile linacs of energy up to 13 MeV, and accelerators of lower energy, below 2 MeV, of better energy yield but of limited applications. The calculations are connected with the confrontation of the author's technological expectations during the preparation of the linac project in the late '60s, with the results of 25 years of exploitation of the machine. One has to realize that from the 200 kW input power from the mains, only 5 kW of bent and scanned beam is recovered on the conveyor. That power is only partially used for radiation induced phenomena, because of the demanded homogeneity of the dose, of the mode of packing of the object and its shape, of edges of the scanned area and in the spaces between boxes, and of loses during the idle time due to the tuning of the machine and dosimetric operations. The use of lower energy accelerators may be more economical than that of linacs in case of objects of specific type. At the first stage already, that is of the conversion of electrical power into that of low energy electron beam, the yield is 2-3 times better than in the case of linacs. Attention has been paid to the technological aspects of electron beam conversion into the more penetrating Bremsstrahlung similar to gamma radiation. The advantages of technologies, which make possible a control of the shape of the processed object are stressed. Special attention is focused to the relation between the yield of processing and the ratio between the maximum to the minimum dose in the object under the irradiation. (author). 14 refs, 14 figs

  2. Designing future learning. A posthumanist approach to researching design processes

    DEFF Research Database (Denmark)

    Juelskjær, Malou

    I investigate how a design process – leading up to the design of a new education building - enact, transform and highlight tacit everyday practices and experiences in an education setting, whereby becoming an art of managing. I apply a post-humanist performative perspective, highlighting entangle...

  3. SOLVING GLOBAL PROBLEMS USING COLLABORATIVE DESIGN PROCESSES

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Mejborn, Christina Okai

    2011-01-01

    In this paper we argue that use of collaborative design processes is a powerful means of bringing together different stakeholders and generating ideas in complex design situations. The collaborative design process was used in a workshop with international participants where the goal was to propose...... forward proposed solutions for how to design, brand and make business models for how to solve aspects of the sanitation problem. The workshop showed that it was possible to work freely with such a taboo topic and that in particular the use of visualisation tools, i.e. drawing posters and building simple...

  4. Comparing composts formed by different technological processing

    Science.gov (United States)

    Lyckova, B.; Mudrunka, J.; Kucerova, R.; Glogarova, V.

    2017-10-01

    The presented article compares quality of composts which were formed by different technological processes. The subject to comparison was a compost which was created in a closed fermenter where ideal conditions for decomposition and organic substances conversion were ensured, with compost which was produced in an open box of community composting. The created composts were analysed to determine whether it is more important for the final compost to comply with the composting conditions or better sorting of raw materials needed for compost production. The results of the carried out experiments showed that quality of the resulting compost cannot be determined unequivocally.

  5. Development of fluid system design technology for integral reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lee, D. J.; Chang, M. H.; Kang, D. J. and others

    1999-03-01

    This study presents the technology development of the system design concepts of SMART, a multi-purposed integral reactor with enhanced safety and operability, for use in diverse usages and applications of the nuclear energy. This report contains the following; - Design characteristics - Performance and safety related design criteria - System description: Primary system, Secondary system, Residual heat removal system, Make-up system, Component cooling system, Safety system - Development of design computer code: Steam generator performance(ONCESG), Pressurizer performance(COLDPZR), Steam generator flow instability(SGINS) - Development of component module and modeling using MMS computer code - Design calculation: Steam generator thermal sizing, Analysis of feed-water temperature increase at a low flow rate, Evaluation of thermal efficiency in the secondary system, Inlet orifice throttling coefficient for the prevention of steam generator flow instability, Analysis of Nitrogen gas temperature in the pressurizer during heat-up process, evaluation of water chemistry and erosion etc. The results of this study can be utilized not only for the foundation technology of the next phase basic system design of the SMART but also for the basic model in optimizing the system concepts for future advanced reactors. (author)

  6. A comprehensive survey of brain interface technology designs.

    Science.gov (United States)

    Mason, S G; Bashashati, A; Fatourechi, M; Navarro, K F; Birch, G E

    2007-02-01

    In this work we present the first comprehensive survey of Brain Interface (BI) technology designs published prior to January 2006. Detailed results from this survey, which was based on the Brain Interface Design Framework proposed by Mason and Birch, are presented and discussed to address the following research questions: (1) which BI technologies are directly comparable, (2) what technology designs exist, (3) which application areas (users, activities and environments) have been targeted in these designs, (4) which design approaches have received little or no research and are possible opportunities for new technology, and (5) how well are designs reported. The results of this work demonstrate that meta-analysis of high-level BI design attributes is possible and informative. The survey also produced a valuable, historical cross-reference where BI technology designers can identify what types of technology have been proposed and by whom.

  7. Regular cell design approach considering lithography-induced process variations

    OpenAIRE

    Gómez Fernández, Sergio

    2014-01-01

    The deployment delays for EUVL, forces IC design to continue using 193nm wavelength lithography with innovative and costly techniques in order to faithfully print sub-wavelength features and combat lithography induced process variations. The effect of the lithography gap in current and upcoming technologies is to cause severe distortions due to optical diffraction in the printed patterns and thus degrading manufacturing yield. Therefore, a paradigm shift in layout design is mandatory towards ...

  8. Design variables and constraints in fashion store design processes

    DEFF Research Database (Denmark)

    Haug, Anders; Borch Münster, Mia

    2015-01-01

    Purpose: – Several frameworks of retail store environment variables exist, but as shown by this paper, they are not particularly well-suited for supporting fashion store design processes. Thus, in order to provide an improved understanding of fashion store design, the purpose of this paper...... of store design ariables and constraints between these. The framework is investigated through six case studies of fashion store design projects. Findings: – Through a discussion of literature and empirical studies, the paper: identifies the most important store design variables, organises these variables...... into categories, provides an understanding of constraints between categories of variables, and identifies the most influential stakeholders. The paper demonstrates that the fashion store design task can be understood through a system perspective, implying that the store design task becomes a matter of defining...

  9. Induction Heating Process Design Using COMSOL Multiphysics Software

    Directory of Open Access Journals (Sweden)

    Andy Triwinarko

    2011-08-01

    Full Text Available Induction heating is clean environmental heating process due to a non-contact heating process. There is lots of the induction heating type that be used in the home appliance but it is still new technology in Indonesia. The main interesting area of the induction heating design is the efficiency of the usage of energy and choice of the plate material. COMSOL Multiphysics Software can be used to simulate and estimate the induction heating process. Therefore, the software can be used to design the induction heating process that will have a optimum efficiency. The properties of the induction heating design were also simulated and analyzed such as effect of inductors width, inductors distance, and conductive plate material. The result was shown that the good design of induction heating must have a short width and distance inductor and used silicon carbide as material plate with high frequency controller.

  10. Strategies for Derisking Translational Processes for Biomedical Technologies.

    Science.gov (United States)

    Abou-El-Enein, Mohamed; Duda, Georg N; Gruskin, Elliott A; Grainger, David W

    2017-02-01

    Inefficient translational processes for technology-oriented biomedical research have led to some prominent and frequent failures in the development of many leading drug candidates, several designated investigational drugs, and some medical devices, as well as documented patient harm and postmarket product withdrawals. Derisking this process, particularly in the early stages, should increase translational efficiency and streamline resource utilization, especially in an academic setting. In this opinion article, we identify a 12-step guideline for reducing risks typically associated with translating medical technologies as they move toward prototypes, preclinical proof of concept, and possible clinical testing. Integrating the described 12-step process should prove valuable for improving how early-stage academic biomedical concepts are cultivated, culled, and manicured toward intended clinical applications. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Accessibility through user-centred and Inclusive Design processes

    DEFF Research Database (Denmark)

    Herriott, Richard

    2014-01-01

    This PhD dissertation addresses the subject of accessibility through user-centred and Inclusive Design processes (ID). The project takes as its starting point the observation that the concept of Inclusive Design is not adequately delimited. The supporting literature in the field of ID is structur...... be delimited by examining design for accessibility in the areas of assistive technology (AT) and public transport (PT) with reference to consumer product design?......This PhD dissertation addresses the subject of accessibility through user-centred and Inclusive Design processes (ID). The project takes as its starting point the observation that the concept of Inclusive Design is not adequately delimited. The supporting literature in the field of ID is structured...

  12. Improving industrial designers work process by involving user research

    DEFF Research Database (Denmark)

    Dai, Zheng; Ómarsson, Ólafur

    2011-01-01

    With changing times, new technologies and more opinionated consumers, the modern industrial designer has found himself in need of fresher and more up to date approaches in his daily work. In a fast moving industry, the designer needs to keep a thinking process of dynamic and subjective attitude....... User research is part of user centered design (UCD). UCD has a reputation for subjective and reflective practice. In this paper there are two example cases. One is conducted by a classical industrial design process, and another is costing half of energy and time in user research. These examples...... will give the grounding for believing that the industrial designer needs to adopt user research methods to a level where he can still continue to work under the very nature of industrial design that has made it a successful practice for the last century. The combing of the approaches and attitude will help...

  13. Statistical processing of technological and radiochemical data

    International Nuclear Information System (INIS)

    Lahodova, Zdena; Vonkova, Kateřina

    2011-01-01

    The project described in this article had two goals. The main goal was to compare technological and radiochemical data from two units of nuclear power plant. The other goal was to check the collection, organization and interpretation of routinely measured data. Monitoring of analytical and radiochemical data is a very valuable source of knowledge for some processes in the primary circuit. Exploratory analysis of one-dimensional data was performed to estimate location and variability and to find extreme values, data trends, distribution, autocorrelation etc. This process allowed for the cleaning and completion of raw data. Then multiple analyses such as multiple comparisons, multiple correlation, variance analysis, and so on were performed. Measured data was organized into a data matrix. The results and graphs such as Box plots, Mahalanobis distance, Biplot, Correlation, and Trend graphs are presented in this article as statistical analysis tools. Tables of data were replaced with graphs because graphs condense large amounts of information into easy-to-understand formats. The significant conclusion of this work is that the collection and comprehension of data is a very substantial part of statistical processing. With well-prepared and well-understood data, its accurate evaluation is possible. Cooperation between the technicians who collect data and the statistician who processes it is also very important. (author)

  14. Gender designs IT construction and deconstruction of information society technology

    CERN Document Server

    Zorn, Isabel; Rommes, Els; Schirmer, Carola; Schelhowe, Heidi

    2007-01-01

    How can information technology (IT) paradigms and design processes be studied from a gender perspective? What does IT design look like when its construction is informed by gender research? Though gender research and computing science seem like two separate worlds, this book proves how inspirational a confrontation and combination of those worlds can be.A deconstructive analysis of advanced fields of computing shows the multiple ways in which software design is gendered and how gendering effects are produced by its use. Concepts and assumptions underlying research and development, along with design tools and IT products, teaching methods and materials are studied.The book not only offers a gender analysis of information society technologies, it also shows practical examples of how IT can be different. A gender perspective on IT design can serve as an eye-opener for what tends to be overlooked and left out. It yields innovative ideas and high quality software systems that may empower a large diversity of user...

  15. Modular helium reactor design, technology, and applications

    International Nuclear Information System (INIS)

    Baxter, A.; Shenoy, A.; Campbell, M.

    2006-01-01

    The Modular Helium Reactor (MHR) combines ceramic coated fuel, helium coolant, graphite moderator, negative temperature coefficient of reactivity, and a unique annular core configuration, with passive decay heat removal capability. This means that it is inherently safe and the fuel can retain fission products without failure even under loss of coolant flow or pressure conditions. The reactor does not require a containment building and the small (600MWt) modular size lends itself to factory fabrication to minimize construction costs. The MHR can operate on several different fuel cycles with no change in plant operating conditions or requirements, including a low enriched uranium or LEU cycle (19.8% U-235), and an LEU/Th cycle. In addition it can also be used to destroy weapons-grade plutonium and the discharged transuranic (TRU) waste from LWRs. ''Self-Cleaning'' fuel cycles which combine LEU fuel with its own reprocessed TRU waste are also feasible. Because of its design and operating conditions, the MHR is a very efficient high temperature heat source with multiple, applications. It can produce electricity at over 47% efficiency using a direct Brayton cycle gas turbine, and it can produce hydrogen at over 50% efficiency using the Sulphur-Iodine process. The high coolant outlet temperature also allows multiple process heat applications including methane or synthetic gasoline production from various feedstocks, methanol from coal, heavy oil recovery from tar sands or oil shale, and both steel and aluminum mill applications. Desalinization is also feasible using a bottoming cycle. The latest MHR designs are discussed in this paper, along with a brief review of the various applications. The fuel cycle options are also discussed, in particular the destruction of TRU waste and the ''Self Cleaning'' fuel cycle

  16. The Influence of Toy Design Activities on Middle School Students' Understanding of the Engineering Design Processes

    Science.gov (United States)

    Zhou, Ninger; Pereira, Nielsen L.; George, Tarun Thomas; Alperovich, Jeffrey; Booth, Joran; Chandrasegaran, Senthil; Tew, Jeffrey David; Kulkarni, Devadatta M.; Ramani, Karthik

    2017-10-01

    The societal demand for inspiring and engaging science, technology, engineering, and mathematics (STEM) students and preparing our workforce for the emerging creative economy has necessitated developing students' self-efficacy and understanding of engineering design processes from as early as elementary school levels. Hands-on engineering design activities have shown the potential to promote middle school students' self-efficacy and understanding of engineering design processes. However, traditional classrooms often lack hands-on engineering design experiences, leaving students unprepared to solve real-world design problems. In this study, we introduce the framework of a toy design workshop and investigate the influence of the workshop activities on students' understanding of and self-efficacy beliefs in engineering design. Using a mixed method approach, we conducted quantitative analyses to show changes in students' engineering design self-efficacy and qualitative analyses to identify students' understanding of the engineering design processes. Findings show that among the 24 participants, there is a significant increase in students' self-efficacy beliefs after attending the workshop. We also identified major themes such as design goals and prototyping in students' understanding of engineering design processes. This research provides insights into the key elements of middle school students' engineering design learning and the benefits of engaging middle school students in hands-on toy design workshops.

  17. SOLVING GLOBAL PROBLEMS USING COLLABORATIVE DESIGN PROCESSES

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Mejborn, Christina Okai

    2011-01-01

    In this paper we argue that use of collaborative design processes is a powerful means of bringing together different stakeholders and generating ideas in complex design situations. The collaborative design process was used in a workshop with international participants where the goal was to propose...... new solutions that would help solve the global problem of sanitation. Lack of sanitation is a problem for 42% of the world’s population but it is also a taboo topic that only very few people will engage in. In the one-day workshop participants from very different areas came together and brought...

  18. THORP - the management of the design process

    International Nuclear Information System (INIS)

    Thorpe, E.; Thurrell, B.H.; Varey, L.S.

    1991-01-01

    This Paper sets out to describe the organization of the design of the Thermal Oxide Reprocessing Plant (THORP) head end and chemical separation building. This posed many challenges not only because the building itself is a complicated engineering entity, but also because of the logistical aspects of administering the large number of engineers and draughtsmen -600 in total at peak- employed on the project. The effects of the necessary iterative design process, both technical and logistical, are outlined, together with a description of the manner in which the whole design process was managed. (author)

  19. A Framework Theorizing Design of Human Technologies

    DEFF Research Database (Denmark)

    Simonsen, Jesper; Hertzum, Morten; Nielsen, Jørgen Lerche

    Design is increasingly becoming a part of the university curriculum and research agenda. It is argued that it is in the interest of many design communities – also the DASTS community – to engage in theorizing design, on the basis of our understanding of design and design practices....

  20. Chemical kinetics and oil shale process design

    Energy Technology Data Exchange (ETDEWEB)

    Burnham, A.K.

    1993-07-01

    Oil shale processes are reviewed with the goal of showing how chemical kinetics influences the design and operation of different processes for different types of oil shale. Reaction kinetics are presented for organic pyrolysis, carbon combustion, carbonate decomposition, and sulfur and nitrogen reactions.

  1. The process system analysis for advanced spent fuel management technology (I)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, H. H.; Lee, J. R.; Kang, D. S.; Seo, C. S.; Shin, Y. J.; Park, S. W.

    1997-12-01

    Various pyrochemical processes were evaluated, and viable options were selected in consideration of the proliferation safety, technological feasibility and compatibility to the domestic nuclear power system. Detailed technical analysis were followed on the selected options such as unit process flowsheet including physico-chemical characteristics of the process systems, preliminary concept development, process design criteria and materials for equipment. Supplementary analysis were also carried out on the support technologies including sampling and transport technologies of molten salt, design criteria and equipment for glove box systems, and remote operation technologies. (author). 40 refs., 49 tabs., 37 figs.

  2. Development of Industrial Process Diagnosis and Measurement Technology

    International Nuclear Information System (INIS)

    Jung, Sung Hee; Kim, Jong Bum; Moon, Jin Ho

    2010-04-01

    Section 1. Industrial Gamma CT Technology for Process Diagnosis: The project is aimed to develop industrial process gamma tomography system for investigation on structural and physical malfunctioning and process media distribution by means of sealed gamma source and radioactive materials. Section 2. Development of RI Hydraulic Detection Technology for Industrial Application: The objectives in this study are to develop the evaluation technology of the hydrological characteristics and the hydraulic detection technology using radioisotope, and to analyze the hydrodynamics and pollutant transport in water environment like surface and subsurface. Section 3. Development of RT-PAT System for Powder Process Diagnosis: The objective of this project is the development of a new radiation technology to improve the accuracy of the determination of moisture content in a powder sample by using radiation source through the so-called RT-PAT (Radiation Technology-Process Analytical Technology), which is a new concept of converging technology between the radiation technology and the process analytical technology

  3. Development of industrial process diagnosis and measurement technology

    International Nuclear Information System (INIS)

    Jung, Sunghee; Kim, Jongbum; Moon, Jinho; Suh, Kyungsuk; Kim, Jongyun

    2012-04-01

    Section1. Industrial Gamma CT Technology for Process Diagnosis The project is aimed to develop industrial process gamma tomography system for investigation on structural and physical malfunctioning and process media distribution by means of sealed gamma source and radioactive materials. Section2. Development of RI Hydraulic Detection Technology for Industrial Application The objectives in this study are to develop the evaluation technology of the hydrological characteristics and the hydraulic detection technology using radioisotope, and to analyze the hydrodynamics and pollutant transport in water environment like surface and subsurface. Section3. Development of RT-PAT System for Powder Process Diagnosis The objective of this project is the development of a new radiation technology to improve the accuracy of the determination of moisture content in a powder sample by using radiation source through the so-called RT-PAT (Radiation Technology-Process Analytical Technology), which is a new concept of converging technology between the radiation technology and the process analytical technology

  4. Low power RF circuit design in standard CMOS technology

    CERN Document Server

    Alvarado, Unai; Adín, Iñigo

    2012-01-01

    Low Power Consumption is one of the critical issues in the performance of small battery-powered handheld devices. Mobile terminals feature an ever increasing number of wireless communication alternatives including GPS, Bluetooth, GSM, 3G, WiFi or DVB-H. Considering that the total power available for each terminal is limited by the relatively slow increase in battery performance expected in the near future, the need for efficient circuits is now critical. This book presents the basic techniques available to design low power RF CMOS analogue circuits. It gives circuit designers a complete guide of alternatives to optimize power consumption and explains the application of these rules in the most common RF building blocks: LNA, mixers and PLLs. It is set out using practical examples and offers a unique perspective as it targets designers working within the standard CMOS process and all the limitations inherent in these technologies.

  5. BASELINE DESIGN/ECONOMICS FOR ADVANCED FISCHER-TROPSCH TECHNOLOGY; FINAL

    International Nuclear Information System (INIS)

    None

    1998-01-01

    Bechtel, along with Amoco as the main subcontractor, developed a Baseline design, two alternative designs, and computer process simulation models for indirect coal liquefaction based on advanced Fischer-Tropsch (F-T) technology for the U. S. Department of Energy's (DOE's) Federal Energy Technology Center (FETC)

  6. On the Process of Software Design

    DEFF Research Database (Denmark)

    Hertzum, Morten

    2008-01-01

    challenge entailed in learning within and across projects. Empirical data from two small to medium-size projects illustrate how practicing software designers struggle with the complexity induced by these constituents and suggest implications for user-centred design. These implications concern collaborative...... grounding, long-loop learning, and the need for a more managed design process while acknowledging that methods are not an alternative to the project knowledge created, negotiated, and refined by designers. Specifically, insufficient collaborative grounding will cause project knowledge to gradually...

  7. Logic-programming language enriches design processes

    Energy Technology Data Exchange (ETDEWEB)

    Kitson, B.; Ow-Wing, K.

    1984-03-22

    With the emergence of a set of high-level CAD tools for programmable logic devices, designers can translate logic into functional custom devices simply and efficiently. The core of the package is a blockstructured hardware description language called PLPL, for ''programmable-logic programming language.'' The cheif advantage of PLPL lies in its multiple input formats, which permit different design approaches for a variety of design problems. The higher the level of the approach, the closer PLPL will come to directly specifying the desired function. Intermediate steps in the design process can be eliminated, along with the errors that might have been generated during those steps.

  8. FY-2010 Process Monitoring Technology Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Orton, Christopher R.; Bryan, Samuel A.; Casella, Amanda J.; Hines, Wes; Levitskaia, Tatiana G.; henkell, J.; Schwantes, Jon M.; Jordan, Elizabeth A.; Lines, Amanda M.; Fraga, Carlos G.; Peterson, James M.; Verdugo, Dawn E.; Christensen, Ronald N.; Peper, Shane M.

    2011-01-01

    During FY 2010, work under the Spectroscopy-Based Process Monitoring task included ordering and receiving four fluid flow meters and four flow visible-near infrared spectrometer cells to be instrumented within the centrifugal contactor system at Pacific Northwest National Laboratory (PNNL). Initial demonstrations of real-time spectroscopic measurements on cold-stream simulants were conducted using plutonium (Pu)/uranium (U) (PUREX) solvent extraction process conditions. The specific test case examined the extraction of neodymium nitrate (Nd(NO3)3) from an aqueous nitric acid (HNO3) feed into a tri-n-butyl phosphate (TBP)/ n-dodecane solvent. Demonstration testing of this system included diverting a sample from the aqueous feed meanwhile monitoring the process in every phase using the on-line spectroscopic process monitoring system. The purpose of this demonstration was to test whether spectroscopic monitoring is capable of determining the mass balance of metal nitrate species involved in a cross-current solvent extraction scheme while also diverting a sample from the system. The diversion scenario involved diverting a portion of the feed from a counter-current extraction system while a continuous extraction experiment was underway. A successful test would demonstrate the ability of the process monitoring system to detect and quantify the diversion of material from the system during a real-time continuous solvent extraction experiment. The system was designed to mimic a PUREX-type extraction process with a bank of four centrifugal contactors. The aqueous feed contained Nd(NO3)3 in HNO3, and the organic phase was composed of TBP/n-dodecane. The amount of sample observed to be diverted by on-line spectroscopic process monitoring was measured to be 3 mmol (3 x 10-3 mol) Nd3+. This value was in excellent agreement with the 2.9 mmol Nd3+ value based on the known mass of sample taken (i.e., diverted) directly from the system feed solution.

  9. The Space House TM : Space Technologies in Architectural Design

    Science.gov (United States)

    Gampe, F.; Raitt, D.

    2002-01-01

    The word "space" has always been associated with and had a profound impact upon architectural design. Until relatively recently, however, the term has been used in a different sense to that understood by the aerospace community - for them, space was less abstract, more concrete and used in the context of space flight and space exploration, rather than, say, an empty area or space requiring to be filled by furniture. However, the two senses of the word space have now converged to some extent. Interior designers and architects have been involved in designing the interior of Skylab, the structure of the International Space Station, and futuristic space hotels. Today, architects are designing, and builders are building, houses, offices and other structures which incorporate a plethora of new technologies, materials and production processes in an effort not only to introduce innovative and adventurous ideas but also in an attempt to address environmental and social issues. Foremost among these new technologies and materials being considered today are those that have been developed for and by the space industry. This paper examines some of these space technologies, such as energy efficient solar cells, durable plastics, air and water filtration techniques, which have been adapted to both provide power while reducing energy consumption, conserve resources and so on. Several of these technologies have now been employed by the European Space Agency to develop a Space House TM - the first of its kind, which will be deployed not so much on planets like Mars, but rather here on Earth. The Space House TM, which exhibits many innovative features such as high strength light-weight carbon composites, active noise-damped, (glass and plastic) windows, low-cost solar arrays and latent heat storage, air and water purification systems will be described.

  10. Robot technologies, autism and designs for learning

    DEFF Research Database (Denmark)

    Hansbøl, Mikala

    2015-01-01

    The field of robot technologies and education is rapidly evolving. Within only a few years, internationally and in Denmark, the focus on educational service robots and educational robotics has become more widespread. The 2015 NMC Technology Outlook report providing a technology outlook...... on Scandinavian schools places robotics and programming within a four to five year time-to-adoption period. At the moment in Denmark, many municipalities are initiating trials, investing in and engaging a diverse range of robot technologies in both daycare and schools. The field of education and robot...... technologies involves several very different educational approaches to supporting young people’s learning and development. The paper discusses how robot technologies as learning resources have been related to the field of autism and education, and argues for a need to further expand the areas of application...

  11. Software engineering technology transfer: Understanding the process

    Science.gov (United States)

    Zelkowitz, Marvin V.

    1993-01-01

    Technology transfer is of crucial concern to both government and industry today. In this report, the mechanisms developed by NASA to transfer technology are explored and the actual mechanisms used to transfer software development technologies are investigated. Time, cost, and effectiveness of software engineering technology transfer is reported.

  12. Systemization of Design and Analysis Technology for Advanced Reactor

    International Nuclear Information System (INIS)

    Kim, Keung Koo; Lee, J.; Zee, S. K.

    2009-01-01

    The present study is performed to establish the base for the license application of the original technology by systemization and enhancement of the technology that is indispensable for the design and analysis of the advanced reactors including integral reactors. Technical reports and topical reports are prepared for this purpose on some important design/analysis methodology; design and analysis computer programs, structural integrity evaluation of main components and structures, digital I and C systems and man-machine interface design. PPS design concept is complemented reflecting typical safety analysis results. And test plans and requirements are developed for the verification of the advanced reactor technology. Moreover, studies are performed to draw up plans to apply to current or advanced power reactors the original technologies or base technologies such as patents, computer programs, test results, design concepts of the systems and components of the advanced reactors. Finally, pending issues are studied of the advanced reactors to improve the economics and technology realization

  13. RF-Frontend Design for Process-Variation-Tolerant Receivers

    CERN Document Server

    Sakian, Pooyan; van Roermund, Arthur

    2012-01-01

    This book discusses a number of challenges faced by designers of wireless receivers, given complications caused by the shrinking of electronic and mobile devices circuitry into ever-smaller sizes and the resulting complications on the manufacturability, production yield, and the end price of the products.  The authors describe the impact of process technology on the performance of the end product and equip RF designers with countermeasures to cope with such problems.  The mechanisms by which these problems arise are analyzed in detail and novel solutions are provided, including design guidelines for receivers with robustness to process variations and details of circuit blocks that obtain the required performance level. Describes RF receiver frontends and their building blocks from a system- and circuit-level perspective; Provides system-level analysis of a generic RF receiver frontend with robustness to process variations; Includes details of CMOS circuit design at 60GHz and reconfigurable circuits at 60GHz...

  14. Electrostatic coating technologies for food processing.

    Science.gov (United States)

    Barringer, Sheryl A; Sumonsiri, Nutsuda

    2015-01-01

    The application of electrostatics in both powder and liquid coating can improve the quality of food, such as its appearance, aroma, taste, and shelf life. Coatings can be found most commonly in the snack food industry, as well as in confectionery, bakery, meat and cheese processing. In electrostatic powder coating, the most important factors influencing coating quality are powder particle size, density, flowability, charge, and resistivity, as well as the surface properties and characteristics of the target. The most important factors during electrostatic liquid coating, also known as electrohydrodynamic coating, include applied voltage and electrical resistivity and viscosity of the liquid. A good understanding of these factors is needed for the design of optimal coating systems for food processing.

  15. Expression regulation of design process gene in product design

    DEFF Research Database (Denmark)

    Li, Bo; Fang, Lusheng; Li, Bo

    2011-01-01

    is proposed and analyzed, as well as its three categories i.e., the operator gene, the structural gene and the regulator gene. Second, the trigger mechanism that design objectives and constraints trigger the operator gene is constructed. Third, the expression principle of structural gene is analyzed...... with the example of design management gene. Last, the regulation mode that the regulator gene regulates the expression of the structural gene is established and it is illustrated by taking the design process management gene as an example. © (2011) Trans Tech Publications....

  16. Designing Pervasive Computing Technology - In a Nomadic Work Perspective

    DEFF Research Database (Denmark)

    Kristensen, Jannie Friis

    2002-01-01

    In my thesis work I am investigating how the design of pervasive/ubiquitous computing technology, relate to the flexible and individual work practice of nomadic workers. Through empirical studies and with an experimental systems development approach, the work is focused on: a) Supporting...... interpretation and inclusion of implicit and invisible as well as explicit and visible characteristics of artifacts, users and use practices. b) Identifying breakdowns in human-computer interaction situations, with particular emphasis on the computation that happens "behind the scenes" in the pervasive computing...... environment, and how that computational process at a sufficient level is made intelligible, visible, accountable and negotiable to the human participant....

  17. Information Technologies of the Distributed Applications Design

    Directory of Open Access Journals (Sweden)

    Safwan Al SALAIMEH

    2007-01-01

    Full Text Available The questions of distributed systems development based on Java RMI, EJB and J2EE technologies and tools are rated. Here is brought the comparative analysis, which determines the domain of an expedient demand of the considered information technologies as applied to the concrete distributed applications requirements.

  18. Application of Java technology in radiation image processing

    International Nuclear Information System (INIS)

    Cheng Weifeng; Li Zheng; Chen Zhiqiang; Zhang Li; Gao Wenhuan

    2002-01-01

    The acquisition and processing of radiation image plays an important role in modern application of civil nuclear technology. The author analyzes the rationale of Java image processing technology which includes Java AWT, Java 2D and JAI. In order to demonstrate applicability of Java technology in field of image processing, examples of application of JAI technology in processing of radiation images of large container have been given

  19. Choices of capture chromatography technology in antibody manufacturing processes.

    Science.gov (United States)

    DiLeo, Michael; Ley, Arthur; Nixon, Andrew E; Chen, Jie

    2017-11-15

    The capture process employed in monoclonal antibody downstream purification is not only the most critically impacted process by increased antibody titer resulting from optimized mammalian cell culture expression systems, but also the most important purification step in determining overall process throughput, product quality, and economics. Advances in separation technology for capturing antibodies from complex feedstocks have been one focus of downstream purification process innovation for past 10 years. In this study, we evaluated new generation chromatography resins used in the antibody capture process including Protein A, cation exchange, and mixed mode chromatography to address the benefits and unique challenges posed by each chromatography approach. Our results demonstrate the benefit of improved binding capacity of new generation Protein A resins, address the concern of high concentration surge caused aggregation when using new generation cation exchange resins with over 100mg/mL binding capacity, and highlight the potential of multimodal cation exchange resins for capture process design. The new landscape of capture chromatography technologies provides options to achieve overall downstream purification outcome with high product quality and process efficiency. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Using Solver Interfaced Virtual Reality in PEACER Design Process

    International Nuclear Information System (INIS)

    Lee, Hyong Won; Nam, Won Chang; Jeong, Seung Ho; Hwang, Il Soon; Shin, Jong Gye; Kim, Chang Hyo

    2006-01-01

    The recent research progress in the area of plant design and simulation highlighted the importance of integrating design and analysis models on a unified environment. For currently developed advanced reactors, either for power production or research, this effort has embraced impressive state-of-the-art information and automation technology. The PEACER (Proliferation-resistant, Environment friendly, Accident-tolerant, Continual and Economical Reactor) is one of the conceptual fast reactor system cooled by LBE (Lead Bismuth Eutectic) for nuclear waste transmutation. This reactor system is composed of innovative combination between design process and analysis. To establish an integrated design process by coupling design, analysis, and post-processing technology while minimizing the repetitive and costly manual interactions for design changes, a solver interfaced virtual reality simulation system (SIVR) has been developed for a nuclear transmutation energy system as PEACER. The SIVR was developed using Virtual Reality Modeling Language (VRML) in order to interface a commercial 3D CAD tool with various engineering solvers and to implement virtual reality presentation of results in a neutral format. In this paper, we have shown the SIVR approach viable and effective in the life-cycle management of complex nuclear energy systems, including design, construction and operation. For instance, The HELIOS is a down scaled model of the PEACER prototype to demonstrate the operability and safety as well as preliminary test of PEACER PLM (Product Life-cycle Management) with SIVR (Solver Interfaced Virtual Reality) concepts. Most components are designed by CATIA, which is 3D CAD tool. During the construction, 3D drawing by CATIA was effective to handle and arrange the loop configuration, especially when we changed the design. Most of all, This system shows the transparency of design and operational status of an energy complex to operators and inspectors can help ensure accident

  1. Using Solver Interfaced Virtual Reality in PEACER Design Process

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hyong Won; Nam, Won Chang; Jeong, Seung Ho; Hwang, Il Soon; Shin, Jong Gye; Kim, Chang Hyo [Seoul National University, Seoul (Korea, Republic of)

    2006-07-01

    The recent research progress in the area of plant design and simulation highlighted the importance of integrating design and analysis models on a unified environment. For currently developed advanced reactors, either for power production or research, this effort has embraced impressive state-of-the-art information and automation technology. The PEACER (Proliferation-resistant, Environment friendly, Accident-tolerant, Continual and Economical Reactor) is one of the conceptual fast reactor system cooled by LBE (Lead Bismuth Eutectic) for nuclear waste transmutation. This reactor system is composed of innovative combination between design process and analysis. To establish an integrated design process by coupling design, analysis, and post-processing technology while minimizing the repetitive and costly manual interactions for design changes, a solver interfaced virtual reality simulation system (SIVR) has been developed for a nuclear transmutation energy system as PEACER. The SIVR was developed using Virtual Reality Modeling Language (VRML) in order to interface a commercial 3D CAD tool with various engineering solvers and to implement virtual reality presentation of results in a neutral format. In this paper, we have shown the SIVR approach viable and effective in the life-cycle management of complex nuclear energy systems, including design, construction and operation. For instance, The HELIOS is a down scaled model of the PEACER prototype to demonstrate the operability and safety as well as preliminary test of PEACER PLM (Product Life-cycle Management) with SIVR (Solver Interfaced Virtual Reality) concepts. Most components are designed by CATIA, which is 3D CAD tool. During the construction, 3D drawing by CATIA was effective to handle and arrange the loop configuration, especially when we changed the design. Most of all, This system shows the transparency of design and operational status of an energy complex to operators and inspectors can help ensure accident

  2. Using CASE to Exploit Process Modeling in Technology Transfer

    Science.gov (United States)

    Renz-Olar, Cheryl

    2003-01-01

    A successful business will be one that has processes in place to run that business. Creating processes, reengineering processes, and continually improving processes can be accomplished through extensive modeling. Casewise(R) Corporate Modeler(TM) CASE is a computer aided software engineering tool that will enable the Technology Transfer Department (TT) at NASA Marshall Space Flight Center (MSFC) to capture these abilities. After successful implementation of CASE, it could then go on to be applied in other departments at MSFC and other centers at NASA. The success of a business process is dependent upon the players working as a team and continuously improving the process. A good process fosters customer satisfaction as well as internal satisfaction in the organizational infrastructure. CASE provides a method for business process success through functions consisting of systems and processes business models; specialized diagrams; matrix management; simulation; report generation and publishing; and, linking, importing, and exporting documents and files. The software has an underlying repository or database to support these functions. The Casewise. manual informs us that dynamics modeling is a technique used in business design and analysis. Feedback is used as a tool for the end users and generates different ways of dealing with the process. Feedback on this project resulted from collection of issues through a systems analyst interface approach of interviews with process coordinators and Technical Points of Contact (TPOCs).

  3. COMPLEX PROCESSING TECHNOLOGY OF TOMATO RAW MATERIALS

    Directory of Open Access Journals (Sweden)

    A. M. Gadzhieva

    2015-01-01

    Full Text Available Tomatoes grown in the central and southern parts of the country, which contain 5-6 % of solids, including 0.13 % of pectin, 0.86 % of fat, 0.5 % of organic acids; 0.5 % minerals, etc. were used as a subject of research. These tomatoes, grown in the mountains, on soils with high salinity, contain high amounts of valuable components and have a long-term preservation. For the extraction of valuable components from dried tomato pomace CO2 extraction method was applied. Technological and environmental feasibility of tomatoes stage drying in the atmosphere of inert gas in solar dry kiln were evaluated; production scheme of dried tomatoes is improved; a system for tomato pomace drying is developed; a production scheme of powders of pulp, skin and seeds of tomatoes is developed. Combined method of tomato pomace drying involves the simultaneous use of the electromagnetic field of low and ultra-high frequency and blowing product surface with hot nitrogen. Conducting the drying process in an inert gas atmosphere of nitrogen intensified the process of moisture removing from tomatoes. The expediency of using tomato powder as enriching additive was proved. Based on the study of the chemical composition of the tomato powder made from Dagestan varieties of tomatoes, and on the organoleptic evaluation and physico-chemical studies of finished products, we have proved the best degree of recoverability of tomato powder during the production of reconstituted juice and tomato beverages.

  4. Process technology - rare and refractory metals

    International Nuclear Information System (INIS)

    Gupta, C.K.; Bose, D.K.

    1989-01-01

    India has fairly rich resreves of rare and refractory metals. Abundant sources of ilmenite, rutile, zircon and rare earths are found in the placer deposits of the southern and eastern coasts of the country. Columbite-tantalite occur in mica and the mining belts of Bihar and cassiterite deposits are found in Bastar (Madhya Pradesh). Vanadium as a minor associate occurs in bauxites and in the vast deposits of titaniferrous magnetites. Over the years, research and development and pilot plant works in many research organisations in India have built up a sound technological base in the country for process metallurgy of many refractory and rare earth metals starting from their indigenous sources. The present paper provides a comprehensive view of the developments that have taken place till now on the processing of various refractory and rare earth metals with particular reference to the extensive work carried out at the Department of Atomic Energy. The coverage includes mineral benification separation of individual elements, preparation of pure intermediates, techniques of reduction to metal and final purification. The paper also reviews some of the recent developments that have been taken place in these fields and the potential application of these metals in the foreseeable future. (author). 22 refs., 18 fi g., 7 tabs

  5. Capturing Creativity in Collaborative Design Processes

    DEFF Research Database (Denmark)

    Pedersen, J. U.; Onarheim, Balder

    2015-01-01

    This paper is concerned with the question of how we can capture creativity in collaborative design processes consisting of two or more individuals collaborating in the process of producing innovative outputs. Traditionally, methods for detecting creativity are focused on the cognitive and mental...... processes of the solitary individual. A new framework for studying and capturing creativity, which goes beyond individual cognitive processes by examining the applied creative process of individuals in context, is proposed. We apply a context sensitive framework that embraces the creative collaborative...... process and present the process in a visual overview with the use of a visual language of symbols. The framework, entitled C3, Capturing Creativity in Context, is presented and subsequently evaluated based on a pilot study utilizing C3. Here it was found that the framework was particularly useful...

  6. Change in requirements during the design process

    DEFF Research Database (Denmark)

    Sudin, Mohd Nizam Bin; Ahmed-Kristensen, Saeema

    2011-01-01

    approach was employed to understand the nature of change in requirements during the design process - particularly concerning the initiation, discovery, and motivation of these changes. Semi-structured interviews were adopted as the data collection method. The interviews were transcribed and analysed based...... on a pre-defined coding scheme. The results of the study shows that change in requirements were initiated by internal stakeholders through analysis and evaluation activities during the design process, meanwhile external stakeholders were requested changes during the meeting with consultant. All......Specification is an integral part of the product development process. Frequently, more than a single version of a specification is produced due to changes in requirements. These changes are often necessary to ensure the scope of the design problem is as clear as possible. However, the negative...

  7. Integrated Process Design and Control of Reactive Distillation Processes

    DEFF Research Database (Denmark)

    Mansouri, Seyed Soheil; Sales-Cruz, Mauricio; Huusom, Jakob Kjøbsted

    2015-01-01

    In this work, integrated design and control of reactive distillation processes is presented. Simple graphical design methods that are similar in concept to non-reactive distillation processes are used, such as reactive McCabe-Thiele method and driving force approach. The methods are based...... on the element concept, which is used to translate a system of compounds into elements. The operation of the reactive distillation column at the highest driving force and other candidate points is analyzed through analytical solution as well as rigorous open-loop and closed-loop simulations. By application...

  8. Liquid metal reactor development. Development of LMR design technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Cheol; Kim, Y. I.; Kim, Y. G.; Kim, E. K.; Song, H.; Chung, H. T.; Sim, Y. S.; Min, B. T.; Kim, Y. S.; Wi, M. H.; Yoo, B.; Lee, J. H.; Lee, H. Y.; Kim, J. B.; Koo, G. H.; Hahn, D. H.; Na, B. C.; Hwang, W.; Nam, C.; Ryu, W. S.; Lim, G. S.; Kim, D. H.; Kim, J. D.; Gil, C. S.

    1997-07-01

    This project was performed in five parts, the scope and contents of which are as follows: The nuclear data processing system was established and the KFS group constant library was improved and verified. Basic computation system was constructed by either developing or adding its function. Input/output (I/O) interface processing was developed to establish an integrated calculation system for LMR core nuclear rand thermal-hydraulic design and analysis. An experimental data analysis was performed to validate the constructed core neutronic calculation system. Using the established core calculation system and design technology, preliminary core design and performance analysis on the domestic LMR core design concept were carried out. To develop the basic technology of the LMR system analysis, LMR system behavior characteristics evaluation, thermal -fluid system analysis in the reactor pool, preliminary overall plant analysis and computer codes development have been performed. A porous model and simple one-dimensional model have been evaluated for the reactor pool analysis. The evaluation of the residual heat removal system on different design concepts has been also conducted. For the development of high temperature structural analysis, the heat transfer and thermal stress analyses were performed using finite element program with user subroutine that has been developed with an implementation of the Chaboche constitutive model for inelastic analysis capability, and the evaluation of creep-fatigue and ratcheting behavior of high temperature structure was carried out using this program. for development of the seismic isolation system and to predict the shear behavior for the laminated rubber bearing were established. And the behavior tests of isolation bearing and rubber specimens were carried out, and the seismic response tests for the isolation model structure were performed using the 30 ton shaking table. (author). 369 refs., 119 tabs., 320 figs.

  9. Conceptual design of industrial process displays.

    Science.gov (United States)

    Pedersen, C R; Lind, M

    1999-11-01

    Today, process displays used in industry are often designed on the basis of piping and instrumentation diagrams without any method of ensuring that the needs of the operators are fulfilled. Therefore, a method for a systematic approach to the design of process displays is needed. This paper discusses aspects of process display design taking into account both the designer's and the operator's points of view. Three aspects are emphasized: the operator tasks, the display content and the display form. The distinction between these three aspects is the basis for proposing an outline for a display design method that matches the industrial practice of modular plant design and satisfies the needs of reusability of display design solutions. The main considerations in display design in the industry are to specify the operator's activities in detail, to extract the information the operators need from the plant design specification and documentation, and finally to present this information. The form of the display is selected from existing standardized display elements such as trend curves, mimic diagrams, ecological interfaces, etc. Further knowledge is required to invent new display elements. That is, knowledge about basic visual means of presenting information and how humans perceive and interpret these means and combinations. This knowledge is required in the systematic selection of graphical items for a given display content. The industrial part of the method is first illustrated in the paper by a simple example from a plant with batch processes. Later the method is applied to develop a supervisory display for a condenser system in a nuclear power plant. The differences between the continuous plant domain of power production and the batch processes from the example are analysed and broad categories of display types are proposed. The problems involved in specification and invention of a supervisory display are analysed and conclusions from these problems are made. It is

  10. Ion Implantation Processing Technologies for Telecommunications Electronics

    Energy Technology Data Exchange (ETDEWEB)

    Haynes, T E

    2000-05-01

    The subject CRADA was a collaboration between Oak Ridge National Laboratory and Bell Laboratories, Lucent Technologies (formerly AT and T Bell Laboratories) to explore the development of ion implantation technologies for silicon integrated circuit (IC) manufacturing.

  11. Manufacturing process design for multi commodities in agriculture

    Science.gov (United States)

    Prasetyawan, Yudha; Santosa, Andrian Henry

    2017-06-01

    High-potential commodities within particular agricultural sectors should be accompanied by maximum benefit value that can be attained by both local farmers and business players. In several cases, the business players are small-medium enterprises (SMEs) which have limited resources to perform added value process of the local commodities into the potential products. The weaknesses of SMEs such as the manual production process with low productivity, limited capacity to maintain prices, and unattractive packaging due to conventional production. Agricultural commodity is commonly created into several products such as flour, chips, crackers, oil, juice, and other products. This research was initiated by collecting data by interview method particularly to obtain the perspectives of SMEs as the business players. Subsequently, the information was processed based on the Quality Function Deployment (QFD) to determine House of Quality from the first to fourth level. A proposed design as the result of QFD was produced and evaluated with Technology Assessment Model (TAM) and continued with a revised design. Finally, the revised design was analyzed with financial perspective to obtain the cost structure of investment, operational, maintenance, and workers. The machine that performs manufacturing process, as the result of revised design, was prototyped and tested to determined initial production process. The designed manufacturing process offers IDR 337,897, 651 of Net Present Value (NPV) in comparison with the existing process value of IDR 9,491,522 based on similar production input.

  12. Sedimentation process and design of settling systems

    CERN Document Server

    De, Alak

    2017-01-01

    This book is designed to serve as a comprehensive source of information of sedimentation processes and design of settling systems, especially as applied to design of such systems in civil and environmental engineering. The book begins with an introduction to sedimentation as a whole and goes on to cover the development and details of various settling theories. The book traces the chronological developments of the comprehensive knowledge of settling studies and design of settling systems from 1889.A new concept of 'Velocity Profile Theorem', tool for settling problem analysis, has been employed to the analysis of the phenomenon of short circuiting. Complete theory of tube settling has been developed and its application to the computation of residual solids from the assorted solids through the same has been demonstrated. Experimental verification of the tube settling theory has also been presented. Field-oriented compatible design and operation methodology of settling system has been developed from the detailed...

  13. Development of fluid and I and C systems design technology

    International Nuclear Information System (INIS)

    Sim, Yoon Sub; Park, C. K.; Kim, S. O.

    2000-05-01

    LMR is the reactor type that makes utilization of uranium resource very efficiently and the necessity of construction of a LMR in 2020's has been raised. However, the design technology required for construction has not been secured domestically. To fulfill the necessity, study has been made for the LMR system design technology and conceptual design of KALIMER systems for fluid, instrumentation, control, and protection have been developed. Also the computer code systems for the design and analysis of the KALIMER fluid systems have been developed. These study results are to used as the starting point of the next phase LMR design technology development research

  14. Development of fluid and I and C systems design technology

    Energy Technology Data Exchange (ETDEWEB)

    Sim, Yoon Sub; Park, C. K.; Kim, S. O. [and others

    2000-05-01

    LMR is the reactor type that makes utilization of uranium resource very efficiently and the necessity of construction of a LMR in 2020's has been raised. However, the design technology required for construction has not been secured domestically. To fulfill the necessity, study has been made for the LMR system design technology and conceptual design of KALIMER systems for fluid, instrumentation, control, and protection have been developed. Also the computer code systems for the design and analysis of the KALIMER fluid systems have been developed. These study results are to used as the starting point of the next phase LMR design technology development research.

  15. IMPROVING THE QUALITY OF MAINTENANCE PROCESSES USING INFORMATION TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Zora Arsovski

    2008-06-01

    Full Text Available In essence, process of maintaining equipment is a support process, because it indirectly contributes to operational ability of the production process necessary for the supply chain of the new value. Taking into account increased levels of automatization and quality, this proces s becomes more and more significant and for some branches of industry, even crucial. Due to the fact that the quality of the entire process is more and more dependent on the maintenance process, these processes must be carefully designed and effectively im plemented. There are various techniques and approaches at our disposal, such as technical, logistical and intensive application of the information - communication technologies. This last approach is presented in this work. It begins with organizational goa ls, especially quality objectives. Then, maintenance processes and integrated information system structures are defined. Maintenance process quality and improvement processes are defined using a set of performances, with a special emphasis placed on effectiveness and quality economics. At the end of the work, information system for improving maintenance economics is structured. Besides theoretical analysis, work also presents results authors obtained analyzing food industry, metal processing industry an d building materials industry.

  16. Fighter aircraft flight control technology design requirements

    Science.gov (United States)

    Nelson, W. E., Jr.

    1984-01-01

    The evolution of fighter aircraft flight control technology is briefly surveyed. Systems engineering, battle damage considerations for adaptive flutter suppression, in-flight simulation, and artificial intelligence are briefly discussed.

  17. How is new technology changing job design?

    OpenAIRE

    Gibbs, Michael

    2017-01-01

    The information technology revolution has had dramatic effects on jobs and the labor market. Many routine and manual tasks have been automated, replacing workers. By contrast, new technologies complement non-routine, cognitive, and social tasks, making work in such tasks more productive. These effects have polarized labor markets: While low-skill jobs have stagnated, there are fewer and lower paid jobs for middle-skill workers, and higher pay for high-skill workers, increasing wage inequality...

  18. Underpinning the STEM Agenda through Technological Textiles? An Exploration of Design Technology Teachers' Attitudes

    Science.gov (United States)

    Hughes, Chris; Bell, Dawne

    2011-01-01

    This paper discusses ongoing research into the role of design and technology education in emerging post industrial economies. Previous work (Hughes et al., 2010) focused on the changing characteristics of textiles technology in modern times and discussed how this could inform a design and technology curriculum related to the needs of a modern…

  19. Sustainable Process Design of Lignocellulose based Biofuel

    DEFF Research Database (Denmark)

    Mangnimit, Saranya; Malakul, Pomthong; Gani, Rafiqul

    available, and are also non-food crops. In this respect, Cassava rhizome has several characteristics that make it a potential feedstock for fuel ethanol production. It has high content of cellulose and hemicelluloses . The objective of this paper is to present a study focused on the sustainable process....... The final process design includes 39 unit operations, has a capacity of 150,000 L/day and produces dry ethanol (approximately 13.0% of cassava rhizome is converted to ethanol)...

  20. Research on application of computer technologies in jewelry process

    Directory of Open Access Journals (Sweden)

    Junbo Xia

    2017-06-01

    Full Text Available Jewelry production is a process of precious raw materials and low losses in processing. The traditional manual mode is unable to meet the needs of enterprises in reality, while the involvement of computer technology can just solve this practical problem. At present, the problem of restricting the application for computer in jewelry production is mainly a failure to find a production model that can serve the whole industry chain with the computer as the core of production. This paper designs a “synchronous and diversified” production model with “computer aided design technology” and “rapid prototyping technology” as the core, and tests with actual production cases, and achieves certain results, which are forward-looking and advanced.

  1. Fastener design development technology for warship equipment installation based on IDEF0

    Directory of Open Access Journals (Sweden)

    LU Yongjin

    2017-10-01

    Full Text Available [Objectives] In order to improve the efficiency and quality of fastener design during equipment installation,in combination with the construction design of warships, [Methods] the design flow of fasteners for warship equipment installation is described. The design function model of fastener design for warship equipment installation was established using the IDEF0 analysis method,and the information transmission and association relation in the design process were analyzed in such aspects as input,output,control and mechanism,accurately reflecting the fastener design process of data flow, information transmission and correlation. [Results] Finally, based on a design function model acknowledged by both engineers and programmers,a design technology framework was constructed using the VBA language of AutoCAD software.[Conclusions] The results show that the design function model and technology framework can provide solutions and theoretical support for design engineering application and software development.

  2. Impact of Computer Technology on Design and Craft Education

    Science.gov (United States)

    Thorsteinsson, Gisli

    2014-01-01

    This research aims to answer the question, "How has the use of computer technology benefited the compulsory education system, focusing on Design and Technology?" In order to reply this question, it was necessary to focus on interactive whiteboards, e-portfolios and digital projectors as the main technology formats. An initial literature…

  3. "Design for Somebody" - Approach Enabling Mobile Technology Development.

    Science.gov (United States)

    Sirkka, Andrew; Merilampi, Sari; Koivisto, Antti; Tommiska, Janika; Saarinen, Tatu-Pekka

    2017-01-01

    This paper presents case examples of Design for Somebody (DfS) philosophy used both in developing novel technologies and modifying existing main stream technologies applicable for users with special needs. DfS embodies variety of mobile technology approaches to generate personalised means to enable and motivate physical, cognitive and social skills development.

  4. An Exploration of Design Students' Inspiration Process

    Science.gov (United States)

    Dazkir, Sibel S.; Mower, Jennifer M.; Reddy-Best, Kelly L.; Pedersen, Elaine L.

    2013-01-01

    Our purpose was to explore how different sources of inspiration influenced two groups of students' inspiration process and their attitudes toward their design projects. Assigned sources of inspiration and instructor's assistance in the search for inspiration varied for two groups of students completing a small culture inspired product design…

  5. Flexible Processing and the Design of Grammar

    Science.gov (United States)

    Sag, Ivan A.; Wasow, Thomas

    2015-01-01

    We explore the consequences of letting the incremental and integrative nature of language processing inform the design of competence grammar. What emerges is a view of grammar as a system of local monotonic constraints that provide a direct characterization of the signs (the form-meaning correspondences) of a given language. This…

  6. Biorefinery plant design, engineering and process optimisation

    DEFF Research Database (Denmark)

    Holm-Nielsen, Jens Bo; Ehimen, Ehiazesebhor Augustine

    2014-01-01

    Before new biorefinery systems can be implemented, or the modification of existing single product biomass processing units into biorefineries can be carried out, proper planning of the intended biorefinery scheme must be performed initially. This chapter outlines design and synthesis approaches a...

  7. Hidden realities inside PBL design processes

    DEFF Research Database (Denmark)

    Pihl, Ole Verner

    2015-01-01

    depends on the interplay between the personalities of the individuals and the group. How does this interplay affect the creative process? This paper seeks answers to the initial question “Is consensus design an impossible clash of interest between the individual and the collective, and is architecture its...

  8. Safeguards planning in a plant design process

    International Nuclear Information System (INIS)

    Heinrich, L.A.

    1977-01-01

    The safeguards efforts for the partitioning fuel cycle are considered. Included in the discussion are the organization of the safeguards study, the development of safeguards criteria, the expression of these criteria as requirements for facility design, and some preliminary details of the implementation of these requirements in facility and process layout

  9. Intelligent Controller Design for a Chemical Process

    OpenAIRE

    Mr. Glan Devadhas G; Dr.Pushpakumar S.

    2010-01-01

    Chemical process control is a challenging problem due to the strong on*line non*linearity and extreme sensitivity to disturbances of the process. Ziegler – Nichols tuned PI and PID controllers are found to provide poor performances for higher*order and non–linear systems. This paper presents an application of one*step*ahead fuzzy as well as ANFIS (adaptive*network*based fuzzy inference system) tuning scheme for an Continuous Stirred Tank Reactor CSTR process. The controller is designed based ...

  10. Designing Instruction in the Face of Technology Transience

    Science.gov (United States)

    Linder-VanBerschot, Jennifer A.; Summers, Laura L.

    2015-01-01

    As we strive to provide quality and sustainable online learning experiences, we must frame instructional design decisions around learners' current needs and interaction with technology. This article explores the implications of technology transience on instructional design. We provide numerous examples of programs assuming a purposeful approach to…

  11. Development of core design technology for LMR

    International Nuclear Information System (INIS)

    Kim, Young Jin; Kim Young In; Kim, Young Il; Kim, Y. G.; Kim, S. J.; Song, H.; Kim, T. K.; Kim, W. S.; Hwang, W.; Lee, B. O.; Park, C. K.; Joo, H. K.; Yoo, J. W.; Kang, H. Y.; Park, W. S.

    2000-05-01

    For the development of KALIMER (150 MWe) core conceptual design, design evolution and optimization for improved economics and safety enhancement was performed in the uranium metallic fueled equilibrium core design which uses U-Zr binary fuel not in excess of 20 percent enrichment. Utilizing results of the uranium ,metallic fueled core design, the breeder equilibrium core design with breeding ratio being over 1.1 was developed. In addition, utilizing LMR's excellent neutron economy, various core concepts for minor actinide burnup, inherent safety, economics and non-proliferation were realized and its optimization studies were performed. A code system for the LMR core conceptual design has been established through the implementation of needed functions into the existing codes and development of codes. To improve the accuracy of the core design, a multi-dimensional nodal transport code SOLTRAN, a three-dimensional transient code analysis code STEP, MATRA-LMR and ASSY-P for T/H analysis are under development. Through the automation of design calculations for efficient core design, an input generator and several interface codes have been developed. (author)

  12. Development of core design technology for LMR

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Kim Young In; Kim, Young Il; Kim, Y. G.; Kim, S. J.; Song, H.; Kim, T. K.; Kim, W. S.; Hwang, W.; Lee, B. O.; Park, C. K.; Joo, H. K.; Yoo, J. W.; Kang, H. Y.; Park, W. S

    2000-05-01

    For the development of KALIMER (150 MWe) core conceptual design, design evolution and optimization for improved economics and safety enhancement was performed in the uranium metallic fueled equilibrium core design which uses U-Zr binary fuel not in excess of 20 percent enrichment. Utilizing results of the uranium ,metallic fueled core design, the breeder equilibrium core design with breeding ratio being over 1.1 was developed. In addition, utilizing LMR's excellent neutron economy, various core concepts for minor actinide burnup, inherent safety, economics and non-proliferation were realized and its optimization studies were performed. A code system for the LMR core conceptual design has been established through the implementation of needed functions into the existing codes and development of codes. To improve the accuracy of the core design, a multi-dimensional nodal transport code SOLTRAN, a three-dimensional transient code analysis code STEP, MATRA-LMR and ASSY-P for T/H analysis are under development. Through the automation of design calculations for efficient core design, an input generator and several interface codes have been developed. (author)

  13. Advanced design and construction technology for ABWR

    International Nuclear Information System (INIS)

    Kawahara, Akira

    2003-01-01

    Recently, many countries start planning to construct nuclear plants, and the electric power companies and the plant suppliers are acutely aware of the importance of the technical infrastructure required for construction planning and execution as this has a significant influence on construction costs. Plant suppliers in Japan have been focusing its attention on the efficiency of construction from earlier, because of its significant role in determining overall construction costs. Through continuous efforts to reduce fieldwork costs, we have developed unique technologies, especially the 3D-CAD system and other advanced construction technologies including modularization. We, plant suppliers are now turning its attention to overseas nuclear plants construction also, and are developing more rational, economical, and global construction based on its vast experience in construction techniques. In this report, the evolution of plant engineering methods and construction technologies, the present level of progress in construction, and technical developments for the future, are described. (author)

  14. Transforming Inclusion: Designing in the Experience of Greater Technological Possibility.

    Science.gov (United States)

    Bridge, Catherine; Demirbilek, Oya; Mintzes, Alicia

    2016-01-01

    Universal Design seeks to contribute to the sustainability and inclusivity of communities and co-design and participatory methods are a critical tool in this evolution. The fact that technology permeates our society is undeniable and the form and materials that technology takes in turn shape the basics of human life such as being able to shower and toilet oneself. In contrast, the various existing approaches to co-design have very different sorts of metaphysical, epistemological and normative assumptions behind them. As a result, design has recognised a set of problems surrounding the position of the "user" in design innovation. Additionally, there are many different perspectives on technology and the role of technology in co-design methods. Consequently, there are a number of different ways of conceiving of the "problem" of integrating technologies into co-design methods. Traditionally, participatory design has been viewed as merely the insertion of a more public dialog of the potential target market within technological design practices. Our research indicates that most if not all co-designers rely on their own personal and collective knowledge and experience and that if this is not actively explored as a part of a co-design methodology that both participation and innovation will be less than hoped for. For instance, assuming only known fixtures, fittings with current codes and standards is unlikely to result in product innovation.

  15. Future Perspective : Design Process of Perfume Packaging

    OpenAIRE

    Anderson, Duncan

    2016-01-01

    In a world where technology develops at a rapid speed a packaging designer should have the ability to adapt to the challenges in a world where the packaging landscape might look far more different from today. This thesis will look at possible future scenarios relating to resources, infrastructure and consumer behaviour in the year 2050. It will then go on to discuss the emergence of new packaging materials pitted to replace plastic, as well as take a look at printed electronics in packaging a...

  16. Process design and optimization of cellulose hydrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Lindsey, R.R.; Wilke, C.R.

    1978-08-01

    The primary concern of this work is the economic optimization of a process for the hydrolysis of waste cellulosic material to fermentable sugars. Hydrolysis is performed enzymatically, utilizing the cellulase enzyme complex produced by Trichoderma viride. Using corn stover as a substrate, a system was designed to provide 14% hydrolyzate sugars (70% fermentable) at an estimated cost of 6.84 cents/pound of sugar, a 43% cost reduction over previous designs. Optimal residence time for hydrolysis was found to be 62 hours, resulting in a 34% conversion of raw material to sugars. Total fixed capital investment for the process is estimated to be $17.13 x 10/sup 6/. The kinetics of cellulose hydrolysis were modeled through the use of a modified Michaelis--Menten equation, making computer simulation of batch hydrolyses possible. Additional studies on the accessibility of cellulose were performed, and the feasibility of a counter-current processing scheme was investigated.

  17. Enabling Creative Learning Design through Semantic Technologies

    Science.gov (United States)

    Charlton, Patricia; Magoulas, George; Laurillard, Diana

    2012-01-01

    The paper advocates an approach to learning design that considers it as creating digital artefacts that can be extended, modified and used for different purposes. This is realised through an "act becoming artefact" cycle, where users' actions in the authors' software environment, named Learning Designer, are automatically interpreted on…

  18. Development of pedagogical design in technology-rich environments for language teaching and learning

    OpenAIRE

    Jalkanen, Juha

    2015-01-01

    This study explores the development of pedagogical design for language teaching and learning in increasingly technology-rich environments. More specifically, it focuses on the process of design, enactment and analysis of language and literacy pedagogies in technology-rich environments. Two substudies are reported in five articles, each of which approaches pedagogical design from a different perspective. The first substudy examined (a) what pedagogical choices language studen...

  19. An Assessment of the Technical Readiness of the Vapor Phase Catalytic Ammonia Removal Process (VPCAR) Technology

    Science.gov (United States)

    Flynn, Michael

    2000-01-01

    This poster provides an assessment of the technical readiness of the Vapor Phase Catalytic Ammonia Removal Process (VPCAR). The VPCAR technology is a fully regenerative water recycling technology designed specifically for applications such as a near term Mars exploration mission. The VPCAR technology is a highly integrated distillation/catalytic oxidation based water processor. It is designed to accept a combined wastewater stream (urine, condensate, and hygiene) and produces potable water in a single process step which requires -no regularly scheduled re-supply or maintenance for a 3 year mission. The technology is designed to be modular and to fit into a volume comparable to a single International Space Station Rack (when sized for a crew of 6). This poster provides a description of the VPCAR technology and a summary of the current performance of the technology. Also provided are the results of two separate NASA sponsored system trade studies which investigated the potential payback of further development of the VPCAR technology.

  20. Process control for sheet-metal stamping process modeling, controller design and shop-floor implementation

    CERN Document Server

    Lim, Yongseob; Ulsoy, A Galip

    2014-01-01

    Process Control for Sheet-Metal Stamping presents a comprehensive and structured approach to the design and implementation of controllers for the sheet metal stamping process. The use of process control for sheet-metal stamping greatly reduces defects in deep-drawn parts and can also yield large material savings from reduced scrap. Sheet-metal forming is a complex process and most often characterized by partial differential equations that are numerically solved using finite-element techniques. In this book, twenty years of academic research are reviewed and the resulting technology transitioned to the industrial environment. The sheet-metal stamping process is modeled in a manner suitable for multiple-input multiple-output control system design, with commercially available sensors and actuators. These models are then used to design adaptive controllers and real-time controller implementation is discussed. Finally, experimental results from actual shopfloor deployment are presented along with ideas for further...

  1. Artificial intelligence in process design and operation

    International Nuclear Information System (INIS)

    Sudduth, A.L.

    1988-01-01

    Artificial Intelligence (AI) has recently become prominent in the discussion of computer applications in the utility business. In order to assess this technology, a research project was performed to determine whether software development techniques based on AI could be used to facilitate management of information associated with the design of a generating station. The approach taken was the development of an expert system, using a relatively simple set of rules acting on a more complex knowledge base. A successful prototype for the application was developed and its potential extension to a production environment demonstrated. During the course of prototype development, other possible applications of AI in design engineering were discovered, and areas of particular interest selected for further investigation. A plan for AI R and D was formulated. That plan and other possible future work in AI are discussed

  2. Circuit design in organic semiconductor technologies

    NARCIS (Netherlands)

    Heremans, P.; Dehaene, W.; Steyaert, M.; Myny, K.; Mariën, H.; Genoe, J.; Gelinck, G.H.; Veenendaal, E. van

    2011-01-01

    In this paper, we review the state of the art of digital and analog circuits that have been shown in recent years in organic thin-film transistor technology on flexible plastic foil. The transistors are developed for backplanes of displays, and therefore have the characteristics to be unipolar and

  3. Teacher and Technology, New Designs for Learning.

    Science.gov (United States)

    Trow, William Clark

    Technological devices present a challenge that educators cannot afford to ignore. Properly incorporated into a controlled environment, these tools need not bring about any dehumanization of the schools. Traditional teaching methods, promotion policies, marking practices, and classrooms organized by grade level may allow control over what is…

  4. Model-Based Integrated Process Design and Controller Design of Chemical Processes

    DEFF Research Database (Denmark)

    Abd Hamid, Mohd Kamaruddin Bin

    in terms of optimal condition of operation from design and control viewpoints. The targets for the design-control solution are defined at the maximum point of the attainable region and driving force diagrams. Defining the targets at the maximum point of the attainable region and driving force diagram......This thesis describes the development and application of a new systematic modelbased methodology for performing integrated process design and controller design (IPDC) of chemical processes. The new methodology is simple to apply, easy to visualize and efficient to solve. Here, the IPDC problem...... and verification. Using thermodynamic and process insights, a bounded search space is first identified. This feasible solution space is further reduced to satisfy the process design and controller design constraints in sub-problems 2 and 3, respectively, until in the final sub-problem all feasible candidates...

  5. New Perspectives: Technology Teacher Education and Engineering Design

    OpenAIRE

    Hill, Roger B.

    2006-01-01

    Initiatives to integrate engineering design within the field of technology education are increasingly evident (Lewis, 2005; Wicklein, 2006). Alliances between technology education and engineering were prominent in the development of the Standards for Technological Literacy (International Technology Education Association, 2000), and leaders from both disciplines have expressed support for the outcomes described in the Standards (Bybee, 2000; Council of the National Academy of Engineering, 2000...

  6. Design and technology assessment of three lunar habitat concepts

    Science.gov (United States)

    Hypes, Warren D.; Wright, Robert L.; Gould, Marston J.

    1992-01-01

    Three manned lunar habitat concepts, designed to support a crew of four for 28-30 days, are presented. Two concepts are based on Space Station Freedom structural elements and the third uses an earlier expandable-module-technology base. Technology readiness criteria, developed for assessing NASA sponsored developments, are applied to technology development needs for each concept to estimate the present level of technology readiness.

  7. Adoption of improved oil palm processing technology in Umuahia ...

    African Journals Online (AJOL)

    It was found that a large percentage of the respondents were aware of the 5 improved oil palm processing technologies with friends and relatives as major source of information. Adoption was significant for 3 out of 5 technologies under study. The major constraints to improved oil palm processing technologies were high ...

  8. The Process of Accepting Technology Innovation for Rural Teachers

    Science.gov (United States)

    Cerovski, Jeremy

    2016-01-01

    In order for educational leaders to facilitate effectively the integration of technology, an understanding of the process rural teachers experience with technology integration is critical. The goal of the qualitative study was to discover and understand rural teachers' process for accepting technology innovation in order to improve the…

  9. TECHNOLOGY SUMMARY ADVANCING TANK WASTE RETRIEVAL AND PROCESSING

    Energy Technology Data Exchange (ETDEWEB)

    SAMS TL; MENDOZA RE

    2010-08-11

    This technology overview provides a high-level summary of technologies being investigated and developed by Washington River Protection Solutions (WRPS) to advance Hanford Site tank waste retrieval and processing. Technology solutions are outlined, along with processes and priorities for selecting and developing them.

  10. TECHNOLOGY SUMMARY ADVANCING TANK WASTE RETREIVAL AND PROCESSING

    Energy Technology Data Exchange (ETDEWEB)

    SAMS TL

    2010-07-07

    This technology overview provides a high-level summary of technologies being investigated and developed by Washington River Protection Solutions (WRPS) to advance Hanford Site tank waste retrieval and processing. Technology solutions are outlined, along with processes and priorities for selecting and developing them.

  11. Upgrading of the extruder screw design for secondary polymers processing

    Directory of Open Access Journals (Sweden)

    Володимир Валентинович Кухар

    2017-06-01

    Full Text Available Some methods of polymeric materials waste recycling have been analyzed in this paper and the prospects of the theory development as well as extrusion technology and co-extruding processes have been shown. The purpose of this work was an analytical research of the backpressure in different sectors of the extruder when the pressed bulk moves through it and improvement of the working conditions of the device to fit the technology of plastics waste processing. The recommendations as to the calculation of the required design parameters of the screw, as the main structural element of the extruder, have been developed as a result of research, which makes it possible to achieve better processing of the pressed bulk under specified temperature and rate conditions due to the levelling of the backpressure and pumping effect in all sections of the device. The proposed upgrading provides productivity levelling in all sections of the extruder, which excludes intermittent work, breaks and thickness unevenness of the manufactured products. Through the analytical consideration of the extrusion process theory in various sectors of the extruder, which are characterized by different temperature conditions and the pumping effect, the equation for calculating of the auger screw inclination angle for each sector of the extruder has been obtained which makes it possible to improve the machine design. The example of the calculation of the screw design parameters for physical and chemical characteristics of low-pressure polyethylene under the conditions of its processing has been furnished

  12. Technological Innovation: Concept, Process, Typology and Implications in the Economy

    Directory of Open Access Journals (Sweden)

    Mihaela DIACONU

    2011-10-01

    Full Text Available Growing interest worldwide to boost innovation in business sector activities, especially the technology, is intended to maintain or increase national economic competitiveness, inclusively as an effect of awareness concerning the effects resulting from economic activity on consumption of resources and environment, which requires design of new patterns of production and consumption. In this paper we review the most important contributions in the literature in terms of the implications of technological innovation in the economy, at the microand macroeconomic level, viewing the organization's ability to generate new ideas in support of increasing production, employment and environmental protection, starting from the concepts of innovation, innovation process and, respectively, from the innovation typology analysis.

  13. Technology transfer and design conversion of a dry spent fuel storage system in Ukraine

    International Nuclear Information System (INIS)

    Peacock, R.C.; Marcelli, D.G.

    1998-01-01

    A number of unique issues surfaced in the technology transfer and design conversion of a US dry spent fuel storage technology in Ukraine. Unique challenges were encountered in the areas of nuclear design conversion, technical codes and standards, material selection and qualification, fabrication, construction and testing, quality assurance, documentation, and translation and verification processes. Technology transfer and design conversion were undertaken for both concrete and steel components for the project. The overall effort presented significant technical and cultural challenges to both the US and Ukrainian side, but technical exchange and design improvements to achieve a common goal have been reached. (author)

  14. Space systems computer-aided design technology

    Science.gov (United States)

    Garrett, L. B.

    1984-01-01

    The interactive Design and Evaluation of Advanced Spacecraft (IDEAS) system is described, together with planned capability increases in the IDEAS system. The system's disciplines consist of interactive graphics and interactive computing. A single user at an interactive terminal can create, design, analyze, and conduct parametric studies of earth-orbiting satellites, which represents a timely and cost-effective method during the conceptual design phase where various missions and spacecraft options require evaluation. Spacecraft concepts evaluated include microwave radiometer satellites, communication satellite systems, solar-powered lasers, power platforms, and orbiting space stations.

  15. Designing interactive technology for crowd experiences - beyond sanitization

    DEFF Research Database (Denmark)

    Veerasawmy, Rune

    2014-01-01

    sanitization. The domain of my experimental design inquiries is at sporting events. From extensive theoretical studies and my empirical explorations I present a perspective on modern and professionalized sporting events as sanitized, where the spectator experiences and technology are being produced, controlled......, and organized. The spectator is considered as a consumer of the sporting event rather than as an active participant. I stage the potential to explore the active participation of crowds when designing technology-supported spectator experiences at sporting events as an alternative to sanitization. The third part......This dissertation concerns the topic on designing interactive technology for crowd expe- riences. It takes the outset in the experience-oriented design approach within interaction design, exploring the research question how can we conceptually understand and design interactive technology for crowd...

  16. How inverse solver technologies can support die face development and process planning in the automotive industry

    Science.gov (United States)

    Huhn, Stefan; Peeling, Derek; Burkart, Maximilian

    2017-10-01

    With the availability of die face design tools and incremental solver technologies to provide detailed forming feasibility results in a timely fashion, the use of inverse solver technologies and resulting process improvements during the product development process of stamped parts often is underestimated. This paper presents some applications of inverse technologies that are currently used in the automotive industry to streamline the product development process and greatly increase the quality of a developed process and the resulting product. The first focus is on the so-called target strain technology. Application examples will show how inverse forming analysis can be applied to support the process engineer during the development of a die face geometry for Class `A' panels. The drawing process is greatly affected by the die face design and the process designer has to ensure that the resulting drawn panel will meet specific requirements regarding surface quality and a minimum strain distribution to ensure dent resistance. The target strain technology provides almost immediate feedback to the process engineer during the die face design process if a specific change of the die face design will help to achieve these specific requirements or will be counterproductive. The paper will further show how an optimization of the material flow can be achieved through the use of a newly developed technology called Sculptured Die Face (SDF). The die face generation in SDF is more suited to be used in optimization loops than any other conventional die face design technology based on cross section design. A second focus in this paper is on the use of inverse solver technologies for secondary forming operations. The paper will show how the application of inverse technology can be used to accurately and quickly develop trim lines on simple as well as on complex support geometries.

  17. Integrating Digital Technologies in Teaching Learning Process

    Science.gov (United States)

    Nagarajan, R.; Velmanirajan, K.; Kanna, K. Sankesh

    2013-01-01

    India has made impressive strides in the application of information and communication technology in recent years and this has reflected in a vibrant and fast growing economy. It is now an acknowledged world leader in the knowledge industry. In this paper an attempt is made to highlight the role of Information and Communication Technology (ICT) in…

  18. Knowledge and cognitive process dimensions of Technology ...

    African Journals Online (AJOL)

    Technology was introduced into the South African school curriculum in recognition of the need to produce more engineers, technicians and artisans and thus to be a vehicle to develop readiness for a competitive and technology-driven economy (Department of Basic Education, 2011). Bloch (2007) avers that it is due to the ...

  19. A Technology Approach to Improving Process Management

    Science.gov (United States)

    Dray, Lori; Strasburger, Tom

    2013-01-01

    It is impossible to ignore how technology is infiltrating education. Interactive projectors and other technologies give teachers and students the opportunity to bring lessons to life. Some districts are replacing textbooks with digital content, allowing students to interact with content in new ways. Galion City School District in Galion, Ohio, is…

  20. Plan for advanced microelectronics processing technology application

    Energy Technology Data Exchange (ETDEWEB)

    Goland, A.N.

    1990-10-01

    The ultimate objective of the tasks described in the research agreement was to identify resources primarily, but not exclusively, within New York State that are available for the development of a Center for Advanced Microelectronics Processing (CAMP). Identification of those resources would enable Brookhaven National Laboratory to prepare a program plan for the CAMP. In order to achieve the stated goal, the principal investigators undertook to meet the key personnel in relevant NYS industrial and academic organizations to discuss the potential for economic development that could accompany such a Center and to gauge the extent of participation that could be expected from each interested party. Integrated of these discussions was to be achieved through a workshop convened in the summer of 1990. The culmination of this workshop was to be a report (the final report) outlining a plan for implementing a Center in the state. As events unfolded, it became possible to identify the elements of a major center for x-ray lithography on Lone Island at Brookhaven National Laboratory. The principal investigators were than advised to substitute a working document based upon that concept in place of a report based upon the more general CAMP workshop originally envisioned. Following that suggestion from the New York State Science and Technology Foundation, the principals established a working group consisting of representatives of the Grumman Corporation, Columbia University, the State University of New York at Stony Brook, and Brookhaven National Laboratory. Regular meetings and additional communications between these collaborators have produced a preproposal that constitutes the main body of the final report required by the contract. Other components of this final report include the interim report and a brief description of the activities which followed the establishment of the X-ray Lithography Center working group.

  1. Requirements Engineering and Design Technology Report

    National Research Council Canada - National Science Library

    Ganska, Ralph

    1995-01-01

    This report reviews the STSC's recommendations for the selection and usage of software engineering products aimed at the requirements analysis and high-level design portions of the software lifecycle...

  2. Decision Gate Process for Assessment of a Technology Development Portfolio

    Science.gov (United States)

    Kohli, Rajiv; Fishman, Julianna; Hyatt, Mark

    2012-01-01

    The NASA Dust Management Project (DMP) was established to provide technologies (to TRL 6 development level) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, which will reduce life cycle cost and risk, and will increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product is either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

  3. Determination of optimum parameters of the technological process for plates forming from V95 and V-1461 alloys in creep applied in aircrafts constructed by “Sukhoi design bureau”

    Science.gov (United States)

    Raevskaya, G. A.; Zakharchenko, K.; Larichkin, A.

    2017-10-01

    The research is devoted to the scientific justification of metal processing by pressure with the help of thick monolithic plates forming (thickness 40 mm) from the V95 (analog 7475) (Al-Zn-Mg-Cu) and V-1461 (analog 2099) (Al-Cu-Li-Zn) alloys in creep and close-to-superplasticity. Optimum parameters of the technological process of plate forming are described. The effect of temperature on the magnitude of mechanical stresses (relaxation) during the tests of materials on pure bending is experimentally determined. Forming of thick plates (40 mm) on the UFP-1M unit, and the control of the obtained surface, in comparison with the given electronic model, made it possible to experimentally determine the time and number of forming stages. Mechanical properties of the material after the technological process and heat treatment are preliminary evaluated. The efficiency of using the obtained parameters of the technological process and treatment of metals by pressure in such methods in general is shown.

  4. Synthesis and Design of Processing Networks

    DEFF Research Database (Denmark)

    Quaglia, Alberto; Sarup, Bent; Sin, Gürkan

    2012-01-01

    In this contribution, we propose an integrated business and engineering framework for synthesis and design of processing networks under uncertainty. In our framework, an adapted formulation of the transhipment problem is integrated with a superstructure, leading to a Stochastic Mixed Integer Non...... Linear Program (sMINLP), which is solved to determine simultaneously the optimal strategic and tactical decisions with respect to the processing network, the material flows, raw material and product portfolio. The framework allows time-effective and robust formulation, solution and analysis of largescale...... synthesis problems in presence of uncertainty parameters, contributing to broaden the range of application of stochastic programming and optimization to real industrial problems. The framework is applied to an industrial case study based on soybean processing, to identify the optimal processing network...

  5. Integrated Process Design, Control and Analysis of Intensified Chemical Processes

    DEFF Research Database (Denmark)

    Mansouri, Seyed Soheil

    distillation column. Next, these design methods are extended using element concept to also include ternary as well as multicomponent reactive distillation processes. The element concept is used to translate a ternary system of compounds (A + B ↔ C) to a binary system of elements (WA and WB). When only two...... elements are needed to represent the reacting system of more than two compounds, a binary element system is identified. In the case of multi-element reactive distillation processes (where more than two elements are encountered) the equivalent element concept is used to translate a multicomponent (multi......-element) system of compounds (A + B ↔ C + D) to a binary system of key elements (elements WHK and WLK). For an energy-efficient design, non-reactive driving force (for binary non-reactive distillation), reactive driving force (for binary element systems) and binary-equivalent driving force (for multicomponent...

  6. Professionalising the asphalt construction process: aligning information technologies, operators' knowledge and laboratory practices

    NARCIS (Netherlands)

    Bijleveld, Frank

    2015-01-01

    This research addresses the need to professionalise the asphalt construction process. A distinctive action research strategy is designed and carried out to progressively improve operational strategies of asphalt teams from technological, human (operator) and laboratory perspectives. Using

  7. Design of Separation Processes with Ionic Liquids

    DEFF Research Database (Denmark)

    Peng-noo, Worawit; Kulajanpeng, Kusuma; Gani, Rafiqul

    2015-01-01

    A systematic methodology for screening and designing of Ionic Liquid (IL)-based separation processes is proposed and demonstrated using several case studies of both aqueous and non-aqueous systems, for instance, ethanol + water, ethanol + hexane, benzene + hexane, and toluene + methylcyclohexane....... The best four ILs of each mixture are [mmim][dmp], [emim][bti], [emim][etso4] and [hmim][tcb], respectively. All of them were used as entrainers in the extractive distillation. A process simulation of each system was carried out and showed a lower both energy requirement and solvent usage as compared...

  8. Implementation of quality by design toward processing of food products.

    Science.gov (United States)

    Rathore, Anurag S; Kapoor, Gautam

    2017-05-28

    Quality by design (QbD) is a systematic approach that begins with predefined objectives and emphasizes product and process understanding and process control. It is an approach based on principles of sound science and quality risk management. As the food processing industry continues to embrace the idea of in-line, online, and/or at-line sensors and real-time characterization for process monitoring and control, the existing gaps with regard to our ability to monitor multiple parameters/variables associated with the manufacturing process will be alleviated over time. Investments made for development of tools and approaches that facilitate high-throughput analytical and process development, process analytical technology, design of experiments, risk analysis, knowledge management, and enhancement of process/product understanding would pave way for operational and economic benefits later in the commercialization process and across other product pipelines. This article aims to achieve two major objectives. First, to review the progress that has been made in the recent years on the topic of QbD implementation in processing of food products and second, present a case study that illustrates benefits of such QbD implementation.

  9. Hygienic Design in the Food Processing Industry

    DEFF Research Database (Denmark)

    Hilbert, Lisbeth Rischel; Hjelm, M.

    2001-01-01

    Bacterial adhesion and biofilm formation are of major concern in food production and processing industry. In 1998 a Danish co-operation programme under the title Centre for Hygienic Design was funded to combine the skills of universities, research institutes and industry to focus on the following...... with cleaning chemicals and cleaning procedures • Optimising design of production equipment • Development of environmentally friendly cleaning procedures for removal of biofilm The partners include food production/processing companies and producers of equipment for the food industry, cleaning chemicals...... approach is to focus on surface material hygienic lifetime. Test of this is made in an industrial test loop run by biotechnology researchers in co-operation with materials producers and a food producer to compare biofilm formation, cleanability and deterioration of different rubber and plastic materials...

  10. Change in requirements during the design process

    DEFF Research Database (Denmark)

    Sudin, Mohd Nizam Bin; Ahmed-Kristensen, Saeema

    2011-01-01

    Specification is an integral part of the product development process. Frequently, more than a single version of a specification is produced due to changes in requirements. These changes are often necessary to ensure the scope of the design problem is as clear as possible. However, the negative...... effects of such changes include an increase in lead-time and cost. Thus, support to mitigate change in requirements is essential. A thorough understanding of the nature of changes in requirements is essential before a method or tool to mitigate these changes can be proposed. Therefore, a case study...... approach was employed to understand the nature of change in requirements during the design process - particularly concerning the initiation, discovery, and motivation of these changes. Semi-structured interviews were adopted as the data collection method. The interviews were transcribed and analysed based...

  11. High School Engineering and Technology Education Integration through Design Challenges

    Science.gov (United States)

    Mentzer, Nathan

    2011-01-01

    This study contextualized the use of the engineering design process by providing descriptions of how each element in a design process was integrated in an eleventh grade industry and engineering systems course. The guiding research question for this inquiry was: How do students engage in the engineering design process in a course where technology…

  12. Best practices for team-based assistive technology design courses.

    Science.gov (United States)

    Goldberg, Mary R; Pearlman, Jonathan L

    2013-09-01

    Team-based design courses focused on products for people with disabilities have become relatively common, in part because of training grants such as the NSF Research to Aid Persons with Disabilities course grants. An output from these courses is an annual description of courses and projects but has yet to be complied into a "best practices guide," though it could be helpful for instructors. To meet this need, we conducted a study to generate best practices for assistive technology product development courses and how to use these courses to teach students the fundamentals of innovation. A full list of recommendations is comprised in the manuscript and include identifying a client through a reliable clinical partner; allowing for transparency between the instructors, the client, and the team(s); establishing multi-disciplinary teams; using a process-oriented vs. solution-oriented product development model; using a project management software to facilitate and archive communication and outputs; facilitating client interaction through frequent communication; seeking to develop professional role confidence to inspire students' commitment to engineering and (where applicable) rehabilitation field; publishing student designs on repositories; incorporating both formal and informal education opportunities related to design; and encouraging students to submit their designs to local or national entrepreneurship competitions.

  13. Biological shielding design calculation for agricultural radiation processing facility

    International Nuclear Information System (INIS)

    Petwal, V.C.; Sandha, R.S.; Soni, H.C.; Subbaiah, K.V.

    2005-01-01

    An electron beam radiation processing facility for agricultural products is being set-up at Centre for Advanced Technology Indore. The facility will be based on a pulsed linear accelerator and will be used in electron and photon modes to process various products e.g. onion, potato, home-pack items and medical products. When electron beam interact with structural components of accelerator or high Z-target used in photon mode, it generates intense Bremsstrahlung radiation field, which poses radiation protection problem. Biological shielding has been designed to provide protection against the generated radiation. Different conveying schemes and hence design of irradiation cell have been studied and results are presented for two promising designs. (author)

  14. Planning, design and technological criteria of conventional and nuclear shelters

    International Nuclear Information System (INIS)

    Sadoon, A.S.

    1989-01-01

    The thesis aims to establish a special criteria for building the shelters in two types. The conventional and nuclear, in respect to planning design and technological aspects, and finally establishing a special reference of planning, design and technology for Iraq which can be used when planning or designing a conventional or nuclear shelter. The thesis included four chapters, the first chapter included definition of shelters, and explanation of the effects of all types of weapons on buildings, and the second chapter included definition of planning and design concepts of shelters in its two types and analytical studies for international examples. The third chapter covered definition for technologies of structural, mechanical, electrical and sanitary systems. The fourth chapter included details of a case study in order to approach the results of research which included the conclusions, recommendations, criteria and prospects of planning design and technological aspects. 51 tabs.; 180 figs.; 32 refs.; 15 apps

  15. What do information reuse and automated processing require in engineering design? Semantic process

    Directory of Open Access Journals (Sweden)

    Ossi Nykänen

    2011-12-01

    Full Text Available Purpose: The purpose of this study is to characterize, analyze, and demonstrate machine-understandable semantic process for validating, integrating, and processing technical design information. This establishes both a vision and tools for information reuse and semi-automatic processing in engineering design projects, including virtual machine laboratory applications with generated components.Design/methodology/approach: The process model has been developed iteratively in terms of action research, constrained by the existing technical design practices and assumptions (design documents, expert feedback, available technologies (pre-studies and experiments with scripting and pipeline tools, benchmarking with other process models and methods (notably the RUP and DITA, and formal requirements (computability and the critical information paths for the generated applications. In practice, the work includes both quantitative and qualitative components.Findings: Technical design processes may be greatly enhanced in terms of semantic process thinking, by enriching design information, and automating information validation and transformation tasks. Contemporary design information, however, is mainly intended for human consumption, and needs to be explicitly enriched with the currently missing data and interfaces. In practice, this may require acknowledging the role of technical information or knowledge engineer, to lead the development of the semantic design information process in a design organization. There is also a trade-off between machine-readability and system complexity that needs to be studied further, both empirically and in theory.Research limitations/implications: The conceptualization of the semantic process is essentially an abstraction based on the idea of progressive design. While this effectively allows implementing semantic processes with, e.g., pipeline technologies, the abstraction is valid only when technical design is organized into

  16. Permanent magnet motor technology design and applications

    CERN Document Server

    Gieras, Jacek F

    2009-01-01

    Demonstrates the construction of permanent magnet (PM) motor drives and supplies ready-to-implement solutions to common roadblocks along the way. This book also supplies fundamental equations and calculations for determining and evaluating system performance, efficiency, reliability, and cost. It explores modern computer-aided design of PM motors.

  17. Instructional Design: Science, Technology, Both, Neither

    Science.gov (United States)

    Gropper, George L.

    2017-01-01

    What would it take for instructional design to qualify as a bona fide applied discipline? First and foremost, a fundamental requirement is a testable and tested theoretical base. Untested rationales until verified remain in limbo. Secondly, the discipline's applied prescriptions must be demonstrably traceable to the theoretical base once it is…

  18. Development of MMIS design technology for integral reactor

    Energy Technology Data Exchange (ETDEWEB)

    Koo, In Soo; Park, H. Y.; Lee, C. K. and others

    1999-03-01

    The objective of this study is to establish the concept design of the SMART MMIS through the setup of a structure and design concept of MMIS, the development of design methodology, and essential technologies for MMIS considering computer based digital technologies and human factors. Main activities of this study divided into three categories such as the development of conceptual design and requirement of the SMART I and C, the development of conceptual design and requirement of the SMART MMI, and essential technology for the MMIS. The results of main activities that have been performed during the study are as follows; 1) The review of licensing requirements and operating experience of existing plants. 2) The establishment of a system design concept about development strategy, basic functions and requirements, and applicable technology through the adoption of digital technology and human factorsengineering. 3) The accomplishment of function, structure, and design requirement of each MMIS through the performance of conceptual design on system structure and actuation logic using function analysis. It is necessary to develop and apply new technologies for the MMIS design compatible with the design basis of SMART. Considered essential technologies for the MMIS in this study are 1) the development of a signal validation algorithm and sensor diagnosis technique 2) the development of a soft controller for operator's action 3) the establishment of a data communication structure for MMIS architecture 4) the development of an information optimization basis and automatic start-up algorithm 5) the development of sensor reduction requirements 6) the development of a qualification method of digital equipment for applied digital technology and commercial grade items. (author)

  19. Development of MMIS design technology for integral reactor

    International Nuclear Information System (INIS)

    Koo, In Soo; Park, H. Y.; Lee, C. K. and others

    1999-03-01

    The objective of this study is to establish the concept design of the SMART MMIS through the setup of a structure and design concept of MMIS, the development of design methodology, and essential technologies for MMIS considering computer based digital technologies and human factors. Main activities of this study divided into three categories such as the development of conceptual design and requirement of the SMART I and C, the development of conceptual design and requirement of the SMART MMI, and essential technology for the MMIS. The results of main activities that have been performed during the study are as follows; 1) The review of licensing requirements and operating experience of existing plants. 2) The establishment of a system design concept about development strategy, basic functions and requirements, and applicable technology through the adoption of digital technology and human factors engineering. 3) The accomplishment of function, structure, and design requirement of each MMIS through the performance of conceptual design on system structure and actuation logic using function analysis. It is necessary to develop and apply new technologies for the MMIS design compatible with the design basis of SMART. Considered essential technologies for the MMIS in this study are 1) the development of a signal validation algorithm and sensor diagnosis technique 2) the development of a soft controller for operator's action 3) the establishment of a data communication structure for MMIS architecture 4) the development of an information optimization basis and automatic start-up algorithm 5) the development of sensor reduction requirements 6) the development of a qualification method of digital equipment for applied digital technology and commercial grade items. (author)

  20. Sustainable and Intensified Design of a Biodiesel Production Process

    DEFF Research Database (Denmark)

    Mansouri, Seyed Soheil; Ismail, Muhammad I.; Babi, Deenesh Kavi

    impact and maximum profitability is needed. In this work a computer-aided framework for process synthesis and process intensification is applied for sustainable production of biodiesel from pure/waste palm oil as the feedstock. This approach examines several biodiesel processing routes that were...... collected through available data and current technologies reported in the literature. Using this information, a generic superstructure of processing routes was created that described a network of configurations representing multiple designs for the production of biodiesel. Therefore, based on the currently...... of economic and environmental sustainability was identified. For the case of biodiesel production, the intensified process alternative turned out to be the most economical and more sustainable than other alternatives. The computer-aided methods and tools used in this work are: SustainPro (method and tool...

  1. Integration of process design and controller design for chemical processes using model-based methodology

    DEFF Research Database (Denmark)

    Abd.Hamid, Mohd-Kamaruddin; Sin, Gürkan; Gani, Rafiqul

    2010-01-01

    In this paper, a novel systematic model-based methodology for performing integrated process design and controller design (IPDC) for chemical processes is presented. The methodology uses a decomposition method to solve the IPDC typically formulated as a mathematical programming (optimization with ...... that satisfy design, control and cost criteria. The advantage of the proposed methodology is that it is systematic, makes use of thermodynamic-process knowledge and provides valuable insights to the solution of IPDC problems in chemical engineering practice.......In this paper, a novel systematic model-based methodology for performing integrated process design and controller design (IPDC) for chemical processes is presented. The methodology uses a decomposition method to solve the IPDC typically formulated as a mathematical programming (optimization...... with constraints) problem. Accordingly the optimization problem is decomposed into four sub-problems: (i) pre-analysis, (ii) design analysis, (iii) controller design analysis, and (iv) final selection and verification, which are relatively easier to solve. The methodology makes use of thermodynamic-process...

  2. Application of BIM Technology in Building Water Supply and Drainage Design

    Science.gov (United States)

    Wei, Tianyun; Chen, Guiqing; Wang, Junde

    2017-12-01

    Through the application of BIM technology, the idea of building water supply and drainage designers can be related to the model, the various influencing factors to affect water supply and drainage design can be considered more comprehensively. BIM(Building information model) technology assist in improving the design process of building water supply and drainage, promoting the building water supply and drainage planning, enriching the building water supply and drainage design method, improving the water supply and drainage system design level and building quality. Combined with fuzzy comprehensive evaluation method to analyze the advantages of BIM technology in building water supply and drainage design. Therefore, application prospects of BIM technology are very worthy of promotion.

  3. Deep Throttle Turbopump Technology Design Concepts

    Science.gov (United States)

    Guinzburg, Adiel; Williams, Morgan; Ferguson, Tom; Garcia, Roberto (Technical Monitor)

    2002-01-01

    The objective of this project is to increase the throttling range of turbopumps from 30 to 120% of the design value, while maintaining high performance levels. Details are given on wide flow range issues, H-Q characteristics, stall characteristics, energy levels, pressure fluctuations at impeller exit, WFR impeller characteristics, commercial diffuser pumps, slotted or tandem vanes, leading edge characteristics, leading edge models, throat models, diffusion passage models, computational fluid dynamics (CFD) methodologies, and CFD flow cases.

  4. Design and technology combine to good effect.

    Science.gov (United States)

    Harris, Virginia

    2015-04-01

    As flooring specialist, Gerflor, marks over 60 years supplying the healthcare sector, Virginia Harris, the company's Scottish sales and specification executive, takes a look at some of the recent trends in healthcare flooring, where attractive aesthetics, sustainability, a hard-wearing and robust construction, and cleaning and infection control considerations, are among the key criteria on specifiers' lists. She also considers the crossover between design and new product development.

  5. Technology, design and dementia: an exploratory survey of developers.

    Science.gov (United States)

    Jiancaro, Tizneem; Jaglal, Susan B; Mihailidis, Alex

    2017-08-01

    Despite worldwide surges in dementia, we still know relatively little about the design of home technologies that support this population. The purpose of this study was to investigate design considerations from the perspective of developers. Participants, including technical and clinical specialists, were recruited internationally and answered web-based survey questions comprising Likert-type responses with text entry options. Developers were queried on 23 technology acceptance characteristics and 24 design practices. In all, forty developers completed the survey. Concerning "technology acceptance", cost, learnability, self-confidence (during use) and usability were deemed very important. Concerning "design practice", developers overwhelmingly valued user-centred design (UCD). In terms of general assistive technology (AT) models, these were largely unknown by technical specialists compared to clinical specialists. Recommendations based on this study include incorporating "self-confidence" into design protocols; examining the implications of "usability" and UCD in this context; and considering empathy-based design approaches to suit a diverse user population. Moreover, clinical specialists have much to offer development teams, particularly concerning the use of conceptual AT models. Implications of rehabilitation Stipulate precise usability criteria. Consider "learnability" and "self-confidence" as technology adoption criteria. Recognize the important theoretical role that clinical specialists can fulfil concerning the use of design schemas. Acknowledge the diversity amongst users with dementia, potentially adopting techniques, such as designing for "extraordinary users".

  6. Active pharmaceutical ingredient (API) production involving continuous processes – A process system engineering (PSE)-assisted design framework

    DEFF Research Database (Denmark)

    Cervera Padrell, Albert Emili; Skovby, Tommy; Kiil, Søren

    2012-01-01

    and fermentation-based products. The method exploits the synergic combination of continuous flow technologies (e.g., microfluidic techniques) and process systems engineering (PSE) methods and tools for faster process design and increased process understanding throughout the whole drug product and process...... development cycle. The design framework structures the many different and challenging design problems (e.g., solvent selection, reactor design, and design of separation and purification operations), driving the user from the initial drug discovery steps – where process knowledge is very limited – toward......A systematic framework is proposed for the design of continuous pharmaceutical manufacturing processes. Specifically, the design framework focuses on organic chemistry based, active pharmaceutical ingredient (API) synthetic processes, but could potentially be extended to biocatalytic...

  7. Design and demonstration of a multitechnology FPGA for photonic information processing

    Science.gov (United States)

    Mal, Prosenjit; Hawk, Chris; Toshniwal, Kavita; Beyette, Fred R., Jr.

    2003-11-01

    We present here a novel architecture for a multi-technology field programmabler gate array (MT-FPGA). Implemented with a conventional CMOS VLSI technology the architecture is suitable for prototyping photonic information processing systems. We report here that this new FPGA architecture will enable the design of reconfigurable systems that incorporate technologies outside the traditional electronic domain.

  8. A Generic Framework for Systematic Design of Process Monitoring and Control System for Crystallization Processes

    DEFF Research Database (Denmark)

    Abdul Samad, Noor Asma Fazli Bin; Meisler, Kresten Troelstrup; Sin, Gürkan

    Crystallization processes have a wide range of application as a solid-liquid separation technique in the chemical, the pharmaceutical and the food industries, due to the fact that high quality crystalline products can be produced. The main specifications of the crystal product are usually given...... in terms of crystal size, size distribution, shape and purity. However, the main difficulty in crystallization processes is to obtain a uniform and reproducible crystal size distribution (CSD). To this end, supersaturation control is often applied to drive the process within the metastable zone in order......, for control and monitoring purposes, an appropriate Process Analytical Technology (PAT) system ensuring that the critical process variables are measured and maintained within the design limits also needs to be integrated. The objectives of this work are to develop a generic systematic design framework...

  9. Trapping technology for gaseous fission products from voloxidation process

    International Nuclear Information System (INIS)

    Shin, Jin Myeong; Park, J. J.; Park, G. I.; Jung, I. H.; Lee, H. H.; Kim, G. H.; Yang, M. S.

    2005-05-01

    The objective of this report is to review the different technologies for trapping the gaseous wastes containing Cs, Ru, Tc, 14 C, Kr, Xe, I and 3 H from a voloxidation process. Based on literature reviews and KAERI's experimental results on the gaseous fission products trapping, appropriate trapping method for each fission product has been selected considering process reliability, simplicity, decontamination factor, availability, and disposal. Specifically, the most promising trapping method for each fission product has been proposed for the development of the INL off-gas trapping system. A fly ash filter is proposed as a trapping media for a cesium trapping unit. In addition, a calcium filter is proposed as a trapping media for ruthenium, technetium, and 14 C trapping unit. In case of I trapping unit, AgX is proposed. For Kr and Xe, adsorption on solid is proposed. SDBC (Styrene Divinyl Benzene Copolymer) is also proposed as a conversion media to HTO for 3 H. This report will be used as a useful means for analyzing the known trapping technologies and help selecting the appropriate trapping methods for trapping volatile and semi-volatile fission products, long-lived fission products, and major heat sources generated from a voloxidation process. It can also be used to design an off-gas treatment system

  10. Exemplary Design Envelope Specification for Standard Modular Hydropower Technology

    Energy Technology Data Exchange (ETDEWEB)

    Witt, Adam M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Smith, Brennan T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Tsakiris, Achilleas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Papanicolaou, Thanos [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Pries, Jason L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Burress, Timothy A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Stewart, Kevin M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lee, Kyutae [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); DeNeale, Scott T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bevelhimer, Mark S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pracheil, Brenda M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); McManamay, Ryan A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ekici, Kivanc [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Kutz, Benjamin [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Curd, Shelaine L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bishop, Norm [Knight Piesold, Denver, CO (United States); Welch, Tim [U.S. Department of Energy (DOE), Washington, DC (United States). Office of Energy Efficiency and Renewable Energy (EERE); Rabon, Daniel [U.S. Department of Energy (DOE), Washington, DC (United States). Office of Energy Efficiency and Renewable Energy (EERE); Fernandez, Alisha [McKeown and Associates, Moberly, MO (United States)

    2017-02-01

    Hydropower is an established, affordable renewable energy generation technology supplying nearly 18% of the electricity consumed globally. A hydropower facility interacts continuously with the surrounding water resource environment, causing alterations of varying magnitude in the natural flow of water, energy, fish, sediment, and recreation upstream and downstream. A universal challenge in facility design is balancing the extraction of useful energy and power system services from a stream with the need to maintain ecosystem processes and natural environmental function. On one hand, hydroelectric power is a carbon-free, renewable, and flexible asset to the power system. On the other, the disruption of longitudinal connectivity and the artificial barrier to aquatic movement created by hydraulic structures can produce negative impacts that stress fresh water environments. The growing need for carbon-free, reliable, efficient distributed energy sources suggests there is significant potential for hydropower projects that can deploy with low installed costs, enhanced ecosystem service offerings, and minimal disruptions of the stream environment.

  11. Forging process design for risk reduction

    Science.gov (United States)

    Mao, Yongning

    In this dissertation, forging process design has been investigated with the primary concern on risk reduction. Different forged components have been studied, especially those ones that could cause catastrophic loss if failure occurs. As an effective modeling methodology, finite element analysis is applied extensively in this work. Three examples, titanium compressor disk, superalloy turbine disk, and titanium hip prosthesis, have been discussed to demonstrate this approach. Discrete defects such as hard alpha anomalies are known to cause disastrous failure if they are present in those stress critical components. In this research, hard-alpha inclusion movement during forging of titanium compressor disk is studied by finite element analysis. By combining the results from Finite Element Method (FEM), regression modeling and Monte Carlo simulation, it is shown that changing the forging path is able to mitigate the failure risk of the components during the service. The second example goes with a turbine disk made of superalloy IN 718. The effect of forging on microstructure is the main consideration in this study. Microstructure defines the as-forged disk properties. Considering specific forging conditions, preform has its own effect on the microstructure. Through a sensitivity study it is found that forging temperature and speed have significant influence on the microstructure. In order to choose the processing parameters to optimize the microstructure, the dependence of microstructure on die speed and temperature is thoroughly studied using design of numerical experiments. For various desired goals, optimal solutions are determined. The narrow processing window of titanium alloy makes the isothermal forging a preferred way to produce forged parts without forging defects. However, the cost of isothermal forging (dies at the same temperature as the workpiece) limits its wide application. In this research, it has been demonstrated that with proper process design, the die

  12. Integrated modelling in materials and process technology

    DEFF Research Database (Denmark)

    Hattel, Jesper Henri

    2008-01-01

    Integrated modelling of entire process sequences and the subsequent in-service conditions, and multiphysics modelling of the single process steps are areas that increasingly support optimisation of manufactured parts. In the present paper, three different examples of modelling manufacturing...... processes from the viewpoint of combined materials and process modelling are presented: solidification of thin walled ductile cast iron, integrated modelling of spray forming and multiphysics modelling of friction stir welding. The fourth example describes integrated modelling applied to a failure analysis...

  13. Novel technologies for the lost foam casting process

    Science.gov (United States)

    Jiang, Wenming; Fan, Zitian

    2018-03-01

    Lost foam casting (LFC) is a green precision casting process categorized as a near net forming technology. Yet, despite its popularity, it still suffers from some technological problems, such as poor filling ability of the castings, coarse and non-dense microstructure, low mechanical properties for the Al and Mg LFC processes, and defective carburization for the low carbon steel LFC process. These drawbacks restrict the development and widespread application of the LFC process. To solve these problems, the present study developed several novel LFC technologies, namely, LFC technologies under vacuum and low pressure, vibration solidification, and pressure solidification conditions; expendable shell casting technology; and preparation technology of bimetallic castings based on the LFC process. The results showed that the LFC under vacuum and low pressure evidently improved the filling ability and solved the oxidization problem of the alloys, which is suitable for producing complex and thinwall castings. The vibration and pressure solidifications increased the compactness of the castings and refined the microstructure, significantly improving the mechanical properties of the castings. The expendable shell casting technology could solve the pore, carburization, and inclusion defects of the traditional LFC method, obtaining castings with acceptable surface quality. Moreover, the Al/Mg and Al/Al bimetallic castings with acceptable metallurgical bonding were successfully fabricated using the LFC process. These proposed novel LFC technologies can solve the current technological issues and promote the technological progress of the LFC process.

  14. Optimization of processing technology of Rhizoma Pinelliae ...

    African Journals Online (AJOL)

    The fundamental purpose for processing tra- ditional Chinese Medicine is to attenuate toxicity and enhance efficacy. The processing of Rhizoma Pinelliae. Praeparatum is a typical representative. Through dif- ferent approaches of processing, toxic constituents of. Rhizoma Pinelliae are reduced, thus extending its range.

  15. Optimization of processing technology of Rhizoma Pinelliae ...

    African Journals Online (AJOL)

    and Alum', General Records", processing with licorice and ginger in "Zhu Shi", Ming Dynasty's processing- with licorice and lime in the "Compendium of Mate- ria Medica", and processing with ethanol and ginger in the "Prescriptions for Universal Relief", Qing Dynas- ty's "Supplement to Compendium of Materia Medica".

  16. RF MEMS theory, design, and technology

    CERN Document Server

    Rebeiz, Gabriel M

    2003-01-01

    Ultrasmall Radio Frequency and Micro-wave Microelectromechanical systems (RF MEMs), such as switches, varactors, and phase shifters, exhibit nearly zero power consumption or loss. For this reason, they are being developed intensively by corporations worldwide for use in telecommunications equipment. This book acquaints readers with the basics of RF MEMs and describes how to design practical circuits and devices with them. The author, an acknowledged expert in the field, presents a range of real-world applications and shares many valuable tricks of the trade.

  17. DEFACTO: A Design Environment for Adaptive Computing Technology

    National Research Council Canada - National Science Library

    Hall, Mary

    2003-01-01

    This report describes the activities of the DEFACTO project, a Design Environment for Adaptive Computing Technology funded under the DARPA Adaptive Computing Systems and Just-In-Time-Hardware programs...

  18. Design Anthropology, Emerging Technologies and Alternative Computational Futures

    DEFF Research Database (Denmark)

    Smith, Rachel Charlotte

    Emerging technologies are providing a new field for design anthropological inquiry that unite experiences, imaginaries and materialities in complex way and demands new approaches to developing sustainable computational futures....

  19. Design of New Food Technology: Social Shaping of Working Environment

    DEFF Research Database (Denmark)

    Broberg, Ole

    2000-01-01

    A five-year design process of a continuous process wok has been studied with the aim of elucidating the conditions for integrating working environment aspects. The design process is seen as a network building activity and as a social shaping process of the artefact. A working environment log...... is suggested as a tool designers can use to integrate considerations of future operators' working environment....

  20. Advanced Manufacturing Office Clean Water Processing Technologies

    Energy Technology Data Exchange (ETDEWEB)

    None

    2018-03-01

    The DOE Office of Energy Efficiency and Renewable Energy (EERE)’s Advanced Manufacturing Office partners with industry, small business, universities, and other stakeholders to identify and invest in emerging technologies with the potential to create high-quality domestic manufacturing jobs and enhance the global competitiveness of the United States.

  1. DESIGNING FEATURES OF POWER OPTICAL UNITS FOR TECHNOLOGICAL EQUIPMENT

    Directory of Open Access Journals (Sweden)

    M. Y. Afanasiev

    2016-03-01

    Full Text Available This paper considers the question of an optical unit designing for transmitting power laser radiation through an optical fiber. The aim of this work is designing a simple construction unit with minimized reflection losses. The source of radiation in the optical unit described below is an ultraviolet laser with diode pumping. We present the general functioning scheme and designing features for the three main parts: laser beam deflecting system, laser beam dump and optical unit control system. The described laser beam deflection system is composed of a moving flat mirror and a spherical scattering mirror. Comparative analysis of the production technology for such mirrors was carried out, and, as a result, the decision was made to produce both mirrors of 99.99 % pure molybdenum without coating. A moving mirror deflects laser emission from a source through a fiber or deflects it on a spherical mirror and into the laser beam dump, moreover, switching from one position to another occurs almost immediately. It is shown that a scattering mirror is necessary, otherwise, the absorbing surface of the beam dump is being worn out irregularly. The laser beam dump is an open conical cavity, in which the conical element with its spire turned to the emission source is placed. Special microgeometry of the internal surface of the beam dump is suggested for the better absorption effect. An optical unit control system consists of a laser beam deflection system, laser temperature sensor, deflection system solenoid temperature sensor, and deflection mirror position sensor. The signal processing algorithm for signals coming from the sensors to the controller is described. The optical unit will be used in special technological equipment.

  2. Missile signal processing common computer architecture for rapid technology upgrade

    Science.gov (United States)

    Rabinkin, Daniel V.; Rutledge, Edward; Monticciolo, Paul

    2004-10-01

    Interceptor missiles process IR images to locate an intended target and guide the interceptor towards it. Signal processing requirements have increased as the sensor bandwidth increases and interceptors operate against more sophisticated targets. A typical interceptor signal processing chain is comprised of two parts. Front-end video processing operates on all pixels of the image and performs such operations as non-uniformity correction (NUC), image stabilization, frame integration and detection. Back-end target processing, which tracks and classifies targets detected in the image, performs such algorithms as Kalman tracking, spectral feature extraction and target discrimination. In the past, video processing was implemented using ASIC components or FPGAs because computation requirements exceeded the throughput of general-purpose processors. Target processing was performed using hybrid architectures that included ASICs, DSPs and general-purpose processors. The resulting systems tended to be function-specific, and required custom software development. They were developed using non-integrated toolsets and test equipment was developed along with the processor platform. The lifespan of a system utilizing the signal processing platform often spans decades, while the specialized nature of processor hardware and software makes it difficult and costly to upgrade. As a result, the signal processing systems often run on outdated technology, algorithms are difficult to update, and system effectiveness is impaired by the inability to rapidly respond to new threats. A new design approach is made possible three developments; Moore's Law - driven improvement in computational throughput; a newly introduced vector computing capability in general purpose processors; and a modern set of open interface software standards. Today's multiprocessor commercial-off-the-shelf (COTS) platforms have sufficient throughput to support interceptor signal processing requirements. This application

  3. Design of a technology centre: A Vehicle for Industrial Development ...

    African Journals Online (AJOL)

    This paper deals with the design of a Technology Centre to meet the needs of industries and enhance the industrial development activities in Ethiopia. The article addresses problems and constraints of industries in developing countries with regards to raw materials, skills, technology master plan, R&D, maintenance and ...

  4. Using GPS-tracking technology for urban design interventions

    NARCIS (Netherlands)

    Van der Spek, S.C.; Van Langelaar, C.M.

    2011-01-01

    The aim of this paper is to express the application of tracking technologies in Urban Design and Planning. Tracking technologies can be used to monitor different user groups in different occasions. Since 2005, TU Delft has explored and developed two types of research using GPS to collect spatio

  5. An Analysis of Instructional Design and Technology Departments

    Science.gov (United States)

    West, Richard E.; Thomas, Rebecca A.; Bodily, Robert; Wright, Casey; Borup, Jered

    2017-01-01

    In this paper we explore the academic productivity of universities in the field of Instructional Design and Technology according to three types of publically available data: (1) publication in 20 leading journals, (2) representation in the "Handbook of Educational Communications Technology," and (3) reception of professional organization…

  6. The General Design and Technology Innovations of CAP1400

    OpenAIRE

    Zheng, Mingguang; Yan, Jinquan; Jun, Shentu; Tian, Lin; Wang, Xujia; Qiu, Zhongming

    2017-01-01

    The pressurized water reactor CAP1400 is one of the sixteen National Science and Technology Major Projects. Developed from China's nuclear R&D system and manufacturing capability, as well as AP1000 technology introduction and assimilation, CAP1400 is an advanced large passive nuclear power plant with independent intellectual property rights. By discussing the top design principle, main performance objectives, general parameters, safety design, and important improvements in safety, economy, an...

  7. Applying operating experience to design the CANDU 3 process

    International Nuclear Information System (INIS)

    Harris, D.S.; Hinchley, E.M.; Pauksens, J.; Snell, V.; Yu, S.K.W.

    1991-01-01

    The CANDU 3 is an advanced, smaller (450 MWe), standardized version of the CANDU now being designed for service later in the decade and beyond. The design of this evolutionary nuclear power plant has been carefully planned and organized to gain maximum benefits from new technologies and from world experience to date in designing, building, commissioning and operating nuclear power stations. The good performance record of existing CANDU reactors makes consideration of operating experience from these plants a particularly vital component of the design process. Since the completion of the first four CANDU 6 stations in the early 1980s, and with the continuing evolution of the multi-unit CANDU station designs since then, AECL CANDU has devised several processes to ensure that such feedback is made available to designers. An important step was made in 1986 when a task force was set up to review and process ideas arising from the commissioning and early operation of the CANDU 6 reactors which were, by that time, operating successfully in Argentina and Korea, as well as the Canadian provinces of Quebec and New Brunswick. The task force issued a comprehensive report which, although aimed at the design of an improved CANDU 6 station, was made available to the CANDU 3 team. By that time also, the Institute of Power Operations (INPO) in the U.S., of which AECL is a Supplier Participant member, was starting to publish Good Practices and Guidelines related to the review and the use of operating experiences. In addition, details of significant events were being made available via the INPO SEE-IN (Significant Event Evaluation and Information Network) Program, and subsequently the CANNET network of the CANDU Owners' Group (COG). Systematic review was thus possible by designers of operations reports, significant event reports, and related documents in a continuing program of design improvement. Another method of incorporating operations feedback is to involve experienced utility

  8. Development of mechanical structure design technology for LMR

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Bong; Lee, Jae Han; Joo, Young Sang [and others

    2000-05-01

    In this project, fundamentals for conceptual design of mechanical structure system for LMR are independently established. The research contents are as follow; at first, conceptual design for SSC, design integration of interfaces, design consistency to keep functions and interfaces by developing arrangement of reactor system and 3 dimensional concept drawings, development and revision of preliminary design requirements and structural design basis, and evaluation of structural integrity for SSC following structural design criteria to check the conceptual design to be proper, at second, development of high temperature structure design and analysis technology and establishment of high temperature structural analysis codes and scheme, development of seismic isolation design concept to reduce seismic design loads to SCC and establishment of seismic analysis codes and scheme.

  9. Development of mechanical structure design technology for LMR

    International Nuclear Information System (INIS)

    Yoo, Bong; Lee, Jae Han; Joo, Young Sang

    2000-05-01

    In this project, fundamentals for conceptual design of mechanical structure system for LMR are independently established. The research contents are as follow; at first, conceptual design for SSC, design integration of interfaces, design consistency to keep functions and interfaces by developing arrangement of reactor system and 3 dimensional concept drawings, development and revision of preliminary design requirements and structural design basis, and evaluation of structural integrity for SSC following structural design criteria to check the conceptual design to be proper, at second, development of high temperature structure design and analysis technology and establishment of high temperature structural analysis codes and scheme, development of seismic isolation design concept to reduce seismic design loads to SCC and establishment of seismic analysis codes and scheme

  10. Flexible processing and the design of grammar.

    Science.gov (United States)

    Sag, Ivan A; Wasow, Thomas

    2015-02-01

    We explore the consequences of letting the incremental and integrative nature of language processing inform the design of competence grammar. What emerges is a view of grammar as a system of local monotonic constraints that provide a direct characterization of the signs (the form-meaning correspondences) of a given language. This "sign-based" conception of grammar has provided precise solutions to the key problems long thought to motivate movement-based analyses, has supported three decades of computational research developing large-scale grammar implementations, and is now beginning to play a role in computational psycholinguistics research that explores the use of underspecification in the incremental computation of partial meanings.

  11. DESIGNING ROADS IN GRENLAND USING GIS TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Abdel A.Z. Barten

    2015-01-01

    Full Text Available Designing a road in the Arctic (Greenland which stretches 157 km between the towns of Sisimiut and Kangerlussuaq was very challenging. Difficult climatic and geotechnical conditions and presence of permafrost required some in-depth analysis and research. Geotechnical investigations were conducted along the entire route. The investigations included field geological and geophysical studies and survey using aerial photography.Based on the investigations a digital model of the area 2 km Ѕ 170 km was prepared. Using a Novapoint software a detailed geometric model was created which allowed for calculationsof the volume of earthworks and creation of transverse and longitudinal sections of the road. A virtual model of the entire road and a movie were made based on the results of all investigations.

  12. Femtosecond laser technologies for linear collider designs

    CERN Document Server

    Kobayashi, K

    2001-01-01

    A highly stabilized high-energy femtosecond laser system was developed for Compton X-ray experiments. The laser system is based on the chirped pulse amplification, and each component is actively or passively stabilized. A master oscillator with less than 100 fs timing jitter, two independent oscillators with 300 fs relative timing lag, a new measurement technique of timing fluctuation of low-repetition amplified pulse, and a special designed regenerative amplifier with high quality beam were developed. New technical options for linear collider are proposed based on these expertises. The options are temporally square pulse for low emittance electron generation, a timing stabilized seeder for CO sub 2 amplifier, and multi-pulse high-energy lasers for gamma-gamma collision and for multi-bunch electron generation.

  13. Sustainable process design & analysis of hybrid separations

    DEFF Research Database (Denmark)

    Kumar Tula, Anjan; Befort, Bridgette; Garg, Nipun

    2016-01-01

    shown that more than 50% of energy is spent in purifying the last 5-10% of the distillate product. Membrane modules on the other hand can achieve high purity separations at lower energy costs, but if the flux is high, it requires large membrane area. A hybrid scheme where distillation and membrane...... modules are combined such that each operates at its highest efficiency, has the potential for significant energy reduction without significant increase of capital costs. This paper presents a method for sustainable design of hybrid distillation-membrane schemes with guaranteed reduction of energy......Distillation is an energy intensive operation in chemical process industries. There are around 40,000 distillation columns in operation in the US, requiring approximately 40% of the total energy consumption in US chemical process industries. However, analysis of separations by distillation has...

  14. Radiation Evaluation and Concept Development for Analog Probability Processing Technology

    Data.gov (United States)

    National Aeronautics and Space Administration — Analog probability processing technology has the ability to provide game-changing performance advances and power savings for on-board data processing applications....

  15. Process Design and Evaluation for Chemicals Based on Renewable Resources

    DEFF Research Database (Denmark)

    Fu, Wenjing

    One of the key steps in process design is choosing between alternative technologies, especially for processes producing bulk and commodity chemicals. Recently, driven by the increasing oil prices and diminishing reserves, the production of bulk and commodity chemicals from renewable feedstocks has...... gained considerable interest. Renewable feedstocks usually cannot be converted into fuels and chemicals with existing process facilities due to the molecular functionality and variety of the most common renewable feedstock (biomass). Therefore new types of catalytic methods as well as new types...... of processes for converting renewable feedstocks to bulk and commodity chemicals are required. In the future, it seems increasingly likely that a combination of biocatalysts (in the form of enzymes) as well as chemical catalysts will be needed in the production of bulk chemicals from renewable feedstocks...

  16. Active Shop Scheduling Of Production Process Based On RFID Technology

    Directory of Open Access Journals (Sweden)

    Cuihua Chao

    2016-01-01

    Full Text Available In industry 4.0 environment, intelligent technology is almost applied to all parts of the manufacturing process, such as process design, job shop scheduling, etc.. This paper presents an efficient approach to job shop scheduling actively by using RFID to collect real-time manufacturing data. Identified the workpiece by RFID which needs to be machined, it can “ask for” the resource actively for the following process. With these active asking-for strategy, a double genetically encoded improved genetic algorithm is proposed for achieving active job shop scheduling solution during the actual manufacturing process. A case was used to evaluate its effectiveness. Meanwhile, , it can effectively and actively carry out job shop scheduling and has much better convergence effect comparing with basic genetic algorithm. And the job shop scheduler in management center can use the proposed algorithm to get the satisfied scheduling result timely by reducing waiting time and making begin time earlier during transmission between manufacturing process, which makes the scheduling result feasible and accurate.

  17. Honeycomb technology materials, design, manufacturing, applications and testing

    CERN Document Server

    Bitzer, Tom

    1997-01-01

    Honeycomb Technology is a guide to honeycomb cores and honeycomb sandwich panels, from the manufacturing methods by which they are produced, to the different types of design, applications for usage and methods of testing the materials. It explains the different types of honeycomb cores available and provides tabulated data of their properties. The author has been involved in the testing and design of honeycomb cores and sandwich panels for nearly 30 years. Honeycomb Technology reflects this by emphasizing a `hands-on' approach and discusses procedures for designing sandwich panels, explaining the necessary equations. Also included is a section on how to design honeycomb energy absorbers and one full chapter discussing honeycomb core and sandwich panel testing. Honeycomb Technology will be of interest to engineers in the aircraft, aerospace and building industries. It will also be of great use to engineering students interested in basic sandwich panel design.

  18. Technology of interdisciplinary open-ended designing in engineering education

    Science.gov (United States)

    Isaev, A. P.; Plotnikov, L. V.; Fomin, N. I.

    2017-11-01

    Author’s technology of interdisciplinary open-ended engineering is presented in this article. This technology is an integrated teaching method that significantly increases the practical component in the educational program. Author’s technology creates the conditions to overcome the shortcomings in the engineering education. The basic ideas of the technology of open-ended engineering, experience of their implementation in higher education and the author’s vision of the teaching technology are examined in the article. The main stages of development process of the author’s technology of open-ended engineering to prepare students (bachelor) of technical profile are presented in the article. Complex of the methodological tools and procedures is shown in the article. This complex is the basis of the developed training technology that is used in educational process in higher school of engineering (UrFU). The organizational model of the technology of open-ended engineering is presented. Organizational model integrates the functions in the creation and implementation of all educational program. Analysis of the characteristics of educational activity of students working on author’s technology of interdisciplinary open-ended engineering is presented. Intermediate results of the application of author’s technology in the educational process of the engineering undergraduate are shown.

  19. Designer cell signal processing circuits for biotechnology.

    Science.gov (United States)

    Bradley, Robert W; Wang, Baojun

    2015-12-25

    Microorganisms are able to respond effectively to diverse signals from their environment and internal metabolism owing to their inherent sophisticated information processing capacity. A central aim of synthetic biology is to control and reprogramme the signal processing pathways within living cells so as to realise repurposed, beneficial applications ranging from disease diagnosis and environmental sensing to chemical bioproduction. To date most examples of synthetic biological signal processing have been built based on digital information flow, though analogue computing is being developed to cope with more complex operations and larger sets of variables. Great progress has been made in expanding the categories of characterised biological components that can be used for cellular signal manipulation, thereby allowing synthetic biologists to more rationally programme increasingly complex behaviours into living cells. Here we present a current overview of the components and strategies that exist for designer cell signal processing and decision making, discuss how these have been implemented in prototype systems for therapeutic, environmental, and industrial biotechnological applications, and examine emerging challenges in this promising field. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

  20. FY97 Materials & Processes Technology Area Plan

    Science.gov (United States)

    1996-09-01

    preproduction ability. Concentrator with Refractive verdsion engines. Trimarc is "--To meet 1700*F - 2800*F Linear Element Technology). 40% lighter than...graph- can also be used as acuators for tios of 1986 engine per- ite foams for structures. ailerons, flaps and landing gear formance baseline...Aerial Aluminum Garnet SCARLET - Solar Concentrator Vehicle Ni - Nickel with Refractive Linear Ele- UHF - Ultra High Frequency NLO - Nonlinear Optical or

  1. Refining processes in the copper casting technology

    OpenAIRE

    Rzadkosz, S.; Kranc, M.; Garbacz-Klempka, A.; Kozana, J.; Piękoś, M.

    2015-01-01

    The paper presents the analysis of technology of copper and alloyed copper destined for power engineering casts. The casts quality was assessed based on microstructure, chemical content analysis and strength properties tests. Characteristic deoxidising (Logas, Cup) and modifying (ODM2, Kupmod2) formulas were used for the copper where high electrical conductivity was required. Chosen examples of alloyed copper with varied Cr and Zr content were studied, and the optimal heat treatment parameter...

  2. Managing Technological Change: The Process is Key

    Science.gov (United States)

    1989-01-01

    performance suggestive of an electronic sweatshop or informa- and the quality of their work lives has been significantly im- tion assembly line than a...changc the rescrvations system, but without docu- systems, databases, and software applications that comprise mentation or access to the person who...and task HAS BEEN SEEN that instead of trying to minimize change. level, the technology’s inherent flexibili- AS A ITATI particularly with respect to

  3. Application of supercritical carbon dioxide extrusion in food processing technology

    OpenAIRE

    Panak-Balentić Jelena; Ačkar Đurđica; Jozinović Antun; Babić Jurislav; Miličević Borislav; Jokić Stela; Pajin Biljana; Šubarić Drago

    2017-01-01

    Extrusion process is one of the most important innovations of the 20th century applied in many industries. Extrusion is a technology that is increasingly used for the production of various food products, especially snacks and breakfast cereals. Supercritical carbon dioxide (CO2) as a non-toxic, non-flammable and inexpensive, is applied in many processes, including the extrusion technology. Supercritical CO2 extrusion process (SCFX) found its application primarily in the processing and manufac...

  4. Hybrid process technologies in the financial sector

    DEFF Research Database (Denmark)

    Debois, Søren; Hildebrandt, Thomas; Marquard, Morten

    2015-01-01

    the variants of the process that are relevant to them. This paper reports on a project we undertook with such a credit institute where we investigated and addressed these issues by providing a hybrid solution, allowing processes to be modelled using our constraint-based modelling tools, but also supporting...

  5. Semantic Technology Recommendation Based on the Analytic Network Process

    OpenAIRE

    Radulovic, F.; García-Castro, Raúl

    2012-01-01

    Semantic technologies have become widely adopted in recent years, and choosing the right technologies for the problems that users face is often a difficult task. This paper presents an application of the Analytic Network Process for the recommendation of semantic technologies, which is based on a quality model for semantic technologies. Instead of relying on expert-based comparisons of alternatives, the comparisons in our framework depend on real evaluation results. Furthermore, the recommend...

  6. Distributed learning process: principles of design and implementation

    Directory of Open Access Journals (Sweden)

    G. N. Boychenko

    2016-01-01

    Full Text Available At the present stage, broad information and communication technologies (ICT usage in educational practices is one of the leading trends of global education system development. This trend has led to the instructional interaction models transformation. Scientists have developed the theory of distributed cognition (Salomon, G., Hutchins, E., and distributed education and training (Fiore, S. M., Salas, E., Oblinger, D. G., Barone, C. A., Hawkins, B. L.. Educational process is based on two separated in time and space sub-processes of learning and teaching which are aimed at the organization of fl exible interactions between learners, teachers and educational content located in different non-centralized places.The purpose of this design research is to fi nd a solution for the problem of formalizing distributed learning process design and realization that is signifi cant in instructional design. The solution to this problem should take into account specifi cs of distributed interactions between team members, which becomes collective subject of distributed cognition in distributed learning process. This makes it necessary to design roles and functions of the individual team members performing distributed educational activities. Personal educational objectives should be determined by decomposition of team objectives into functional roles of its members with considering personal and learning needs and interests of students.Theoretical and empirical methods used in the study: theoretical analysis of philosophical, psychological, and pedagogical literature on the issue, analysis of international standards in the e-learning domain; exploration on practical usage of distributed learning in academic and corporate sectors; generalization, abstraction, cognitive modelling, ontology engineering methods.Result of the research is methodology for design and implementation of distributed learning process based on the competency approach. Methodology proposed by

  7. Photo Processing for Biomedical Hydrogels Design and Functionality: A Review

    Directory of Open Access Journals (Sweden)

    Hongyi Yao

    2017-12-01

    Full Text Available A large number of opportunities for biomedical hydrogel design and functionality through photo-processing have stretched the limits of innovation. As both photochemical understanding and engineering technologies continue to develop, more complicated geometries and spatiotemporal manipulations can be realized through photo-exposure, producing multifunctional hydrogels with specific chemical, biological and physical characteristics for the achievement of biomedical goals. This report describes the role that light has recently played in the synthesis and functionalization of biomedical hydrogels and primarily the design of photoresponsive hydrogels via different chemical reactions (photo crosslinking and photo degradation and conventional light curing processes (micropatterning, stereolithography and two/multiphoton techniques as well as typical biomedical applications of the hydrogels (cell culture, differentiation and in vivo vascularization and their promising future.

  8. A Survey on Evaluation Factors for Business Process Management Technology

    NARCIS (Netherlands)

    Mutschler, B.B.; Reichert, M.U.

    2006-01-01

    Estimating the value of business process management (BPM) technology is a difficult task to accomplish. Computerized business processes have a strong impact on an organization, and BPM projects have a long-term cost amortization. To systematically analyze BPM technology from an economic-driven

  9. Designing for Game-Based Learning: The Effective Integration of Technology to Support Learning

    Science.gov (United States)

    Alaswad, Zina; Nadolny, Larysa

    2015-01-01

    The use of games and game structures in educational contexts is growing in popularity. An increasing number of technologies have been developed to meet the needs of designing a course as a game. This article discussed the design process in game-based learning and reviewed the research on structuring a course with a focus on feedback, goals, and…

  10. Using information technology to support knowledge conversion processes

    Directory of Open Access Journals (Sweden)

    2001-01-01

    Full Text Available One of the main roles of Information Technology in Knowledge Management programs is to accelerate the speed of knowledge transfer and creation. The Knowledge Management tools intend to help the processes of collecting and organizing the knowledge of groups of individuals in order to make this knowledge available in a shared base. Due to the largeness of the concept of knowledge, the software market for Knowledge Management seems to be quite confusing. Technology vendors are developing different implementations of the Knowledge Management concepts in their software products. Because of the variety and quantity of Knowledge Management tools available on the market, a typology may be a valuable aid to organizations that are looking for answers to specific needs. The objective of this article is to present guidelines that help to design such a typology. Knowledge Management solutions such as intranet systems, Electronic Document Management (EDM, groupware, workflow, artificial intelligence-based systems, Business Intelligence (BI, knowledge map systems, innovation support, competitive intelligence tools and knowledge portals are discussed in terms of their potential contributions to the processes of creating, registering and sharing knowledge. A number of Knowledge Management tools (Lotus Notes, Microsoft Exchange, Business Objects, Aris Toolset, File Net, Gingo, Vigipro, Sopheon have been checked. The potential of each category of solutions to support the transfer of tacit and/or explicit knowledge and to facilitate the knowledge conversion spiral in the sense of Nonaka and Takeuchi (1995 is discussed.

  11. Integrating Technology into Classroom: The Learner-Centered Instructional Design

    Science.gov (United States)

    Sezer, Baris; Karaoglan Yilmaz, Fatma Gizem; Yilmaz, Ramazan

    2013-01-01

    In this study, to present an instructional model by considering the existing models of instructional design (ARCS, ADDIE, ASSURE, Dick and Carey, Seels and Glasgow, Smith and Ragan etc.) with the nature of technology-based education and to reveal analysis, design, development, implementation, evaluation, and to revise levels with lower levels of…

  12. Principles and Concepts for Information and Communication Technology Design.

    Science.gov (United States)

    Adams, Ray; Langdon, Patrick

    2003-01-01

    This article presents a theory for evaluating information and communication technology design for individuals with disabilities. Simplex 1 evaluates designs in five zones: sensory and input zone; output zone; abstract working memory; long-term memory; and central executive functioning. Simplex 2 evaluates feedback, emotional responses, cognitive…

  13. Teacher Challenges to Implement Engineering Design in Secondary Technology Education

    Science.gov (United States)

    Kelley, Todd R.; Wicklein, Robert C.

    2009-01-01

    This descriptive study examined the current status of technology education teacher practices with respect to engineering design. This article is the third article in a three-part series presenting the results of this study. The first article in the series titled "Examination of Engineering Design Curriculum Content" highlighted the research…

  14. Toward a psychological science of advanced technology design for older adults.

    Science.gov (United States)

    Rogers, Wendy A; Fisk, Arthur D

    2010-11-01

    Technology represents advances in knowledge that change the way humans perform tasks. Ideally, technology will make the task easier, more efficient, safer, or perhaps more pleasurable. Unfortunately, new technologies can sometimes make a task more difficult, slower, dangerous, or perhaps more frustrating. Older adults interact with a variety of technologies in the course of their daily activities and thus products should be designed to be used by people of varying ages. In this article, we provide an overview of what psychology has to offer to the design of technology-from understanding what people need, to identifying their preferences for design characteristics, and to defining their capabilities and limitations that will influence technology interactions. We identify how research in the field of psychology and aging has advanced understanding of technology interactions and how research on technology interactions can inform theories of aging. Design for aging involves understanding the unique capabilities and limitations of older adults; identifying their needs, preferences, and desires for technology in their lives; and involving them in the design process.

  15. COMPLEX PROCESSING TECHNOLOGY OF TOMATO RAW MATERIALS

    OpenAIRE

    A. M. Gadzhieva; G. I. Kasianov

    2015-01-01

    Tomatoes grown in the central and southern parts of the country, which contain 5-6 % of solids, including 0.13 % of pectin, 0.86 % of fat, 0.5 % of organic acids; 0.5 % minerals, etc. were used as a subject of research. These tomatoes, grown in the mountains, on soils with high salinity, contain high amounts of valuable components and have a long-term preservation. For the extraction of valuable components from dried tomato pomace CO2 extraction method was applied. Technological and environm...

  16. Modeling of processing technologies in food industry

    Science.gov (United States)

    Korotkov, V. G.; Sagitov, R. F.; Popov, V. P.; Bachirov, V. D.; Akhmadieva, Z. R.; TSirkaeva, E. A.

    2018-03-01

    Currently, the society is facing an urgent need to solve the problems of nutrition (products with increased nutrition value) and to develop energy-saving technologies for food products. A mathematical modeling of heat and mass transfer of polymer materials in the extruder is rather successful these days. Mathematical description of movement and heat exchange during extrusion of gluten-protein-starch-containing material similar to pasta dough in its structure, were taken as a framework for the mathematical model presented in this paper.

  17. Best available technology equivalent controls for B Plant Process Condensate: Tank farm process technology section

    International Nuclear Information System (INIS)

    1988-11-01

    This report evaluates whether proposed controls for the B Plant Process Condensate effluent stream are equivalent to Best Available Technology (BAT) economically achievable. Methods to determine whether the proposed controls for the BCP were equivalent to BAT originated from the Guidance Document for the Hanford Site. The BAT performance standards, which originate from the Clean Water Act, are to be applied to all contaminated liquid effluent discharges currently going to the soil column at the Hanford Site. The B Plant BAT evaluation addressed pollutants that had not been regulated traditionally under Federal or State water-pollution control programs. As a result, only comparisons could be made to existing radiation and water quality standards, and a BAT determination based on the effluent guidelines method (as outlined in the BAT Guidance Document) was not possible. Due to the variability and inconsistency of factors with comparable streams, such as the effluent stream at the Savannah River Plant, a BAT determination by the technology transfer method and treatability studies method was not possible. By using the generic treatment systems method, a one-or two-stage treatment system for dissolved solids removal was concluded to be equivalent to BAT. By performing two economic achievability tests, a one-stage treatment system consisting of mixed bed ion exchange columns was considered to be cost effective and equivalent to BAT. 13 refs., 4 figs., 5 tabs

  18. 76 FR 30696 - Technology Evaluation Process

    Science.gov (United States)

    2011-05-26

    ... and a Payback Period Analysis. Life-Cycle Cost Analysis: The life-cycle cost is the total consumer... the output would be Life-Cycle Cost and Payback Period (described below). Payback Analysis: The payback period is the change in purchase expense of the new product (from a less efficient design to a...

  19. Development of core design and analyses technology for integral reactor

    International Nuclear Information System (INIS)

    Zee, Sung Quun; Lee, C. C.; Kim, K. Y.

    2002-03-01

    In general, small and medium-sized integral reactors adopt new technology such as passive and inherent safety concepts to minimize the necessity of power source and operator actions, and to provide the automatic measures to cope with any accidents. Specifically, such reactors are often designed with a lower core power density and with soluble boron free concept for system simplification. Those reactors require ultra long cycle operation for higher economical efficiency. This cycle length requirement is one of the important factors in the design of burnable absorbers as well as assurance of shutdown margin. Hence, both computer code system and design methodology based on the today's design technology for the current commercial reactor cores require intensive improvement for the small and medium-sized soluble boron free reactors. New database is also required for the development of this type of reactor core. Under these technical requirements, conceptual design of small integral reactor SMART has been performed since July 1997, and recently completed under the long term nuclear R and D program. Thus, the final objectives of this work is design and development of an integral reactor core and development of necessary indigenous design technology. To reach the goal of the 2nd stage R and D program for basic design of SMART, design bases and requirements adequate for ultra long cycle and soluble boron free concept are established. These bases and requirements are satisfied by the core loading pattern. Based on the core loading pattern, nuclear, and thermal and hydraulic characteristics are analyzed. Also included are fuel performance analysis and development of a core protection and monitoring system that is adequate for the soluble boron free core of an integral reactor. Core shielding design analysis is accomplished, too. Moreover, full scope interface data are produced for reactor safety and performance analyses and other design activities. Nuclear, thermal and

  20. Technology Planning: Designing the Direction to Get There

    Science.gov (United States)

    Norton, Sylvia Knight

    2013-01-01

    School librarians play an important role in developing a technology plan for the school library program that reflects teaching and learning for today's education. The school librarian's leadership in the overall process and the written plan itself can influence future strategies for teaching and learning with technology that can go well…

  1. Enhancing public involvement in assistive technology design research.

    Science.gov (United States)

    Williamson, Tracey; Kenney, Laurence; Barker, Anthony T; Cooper, Glen; Good, Tim; Healey, Jamie; Heller, Ben; Howard, David; Matthews, Martin; Prenton, Sarah; Ryan, Julia; Smith, Christine

    2015-05-01

    To appraise the application of accepted good practice guidance on public involvement in assistive technology research and to identify its impact on the research team, the public, device and trial design. Critical reflection and within-project evaluation were undertaken in a case study of the development of a functional electrical stimulation device. Individual and group interviews were undertaken with lay members of a 10 strong study user advisory group and also research team members. Public involvement was seen positively by research team members, who reported a positive impact on device and study designs. The public identified positive impact on confidence, skills, self-esteem, enjoyment, contribution to improving the care of others and opportunities for further involvement in research. A negative impact concerned the challenge of engaging the public in dissemination after the study end. The public were able to impact significantly on the design of an assistive technology device which was made more fit for purpose. Research team attitudes to public involvement were more positive after having witnessed its potential first hand. Within-project evaluation underpins this case study which presents a much needed detailed account of public involvement in assistive technology design research to add to the existing weak evidence base. The evidence base for impact of public involvement in rehabilitation technology design is in need of development. Public involvement in co-design of rehabilitation devices can lead to technologies that are fit for purpose. Rehabilitation researchers need to consider the merits of active public involvement in research.

  2. Technical Reviews on Pattern Recognition in Process Analytical Technology

    International Nuclear Information System (INIS)

    Kim, Jong Yun; Choi, Yong Suk; Ji, Sun Kyung; Park, Yong Joon; Song, Kyu Seok; Jung, Sung Hee

    2008-12-01

    Pattern recognition is one of the first and the most widely adopted chemometric tools among many active research area in chemometrics such as design of experiment(DoE), pattern recognition, multivariate calibration, signal processing. Pattern recognition has been used to identify the origin of a wine and the time of year that the vine was grown by using chromatography, cause of fire by using GC/MS chromatography, detection of explosives and land mines, cargo and luggage inspection in seaports and airports by using a prompt gamma-ray activation analysis, and source apportionment of environmental pollutant by using a stable isotope ratio mass spectrometry. Recently, pattern recognition has been taken into account as a major chemometric tool in the so-called 'process analytical technology (PAT)', which is a newly-developed concept in the area of process analytics proposed by US Food and Drug Administration (US FDA). For instance, identification of raw material by using a pattern recognition analysis plays an important role for the effective quality control of the production process. Recently, pattern recognition technique has been used to identify the spatial distribution and uniformity of the active ingredients present in the product such as tablet by transforming the chemical data into the visual information

  3. Development and application of a probabilistic evaluation method for advanced process technologies

    Energy Technology Data Exchange (ETDEWEB)

    Frey, H.C.; Rubin, E.S.

    1991-04-01

    The objective of this work is to develop and apply a method for research planning for advanced process technologies. To satisfy requirements for research planning, it is necessary to: (1) identify robust solutions to process design questions in the face of uncertainty to eliminate inferior design options; (2) identify key problem areas in a technology that should be the focus of further research to reduce the risk of technology failure; (3) compare competing technologies on a consistent basis to determine the risks associated with adopting a new technology; and (4) evaluate the effects that additional research might have on comparisons with conventional technology. An important class of process technologies are electric power plants. In particular, advanced clean coal technologies are expected to play a key role in the energy and environmental future of the US, as well as in other countries. Research planning for advanced clean coal technology development is an important part of energy and environmental policy. Thus, the research planning method developed here is applied to case studies focusing on a specific clean coal technology. The purpose of the case studies is both to demonstrate the research planning method and to obtain technology-specific conclusions regarding research strategies.

  4. Development and application of a probabilistic evaluation method for advanced process technologies. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Frey, H.C.; Rubin, E.S.

    1991-04-01

    The objective of this work is to develop and apply a method for research planning for advanced process technologies. To satisfy requirements for research planning, it is necessary to: (1) identify robust solutions to process design questions in the face of uncertainty to eliminate inferior design options; (2) identify key problem areas in a technology that should be the focus of further research to reduce the risk of technology failure; (3) compare competing technologies on a consistent basis to determine the risks associated with adopting a new technology; and (4) evaluate the effects that additional research might have on comparisons with conventional technology. An important class of process technologies are electric power plants. In particular, advanced clean coal technologies are expected to play a key role in the energy and environmental future of the US, as well as in other countries. Research planning for advanced clean coal technology development is an important part of energy and environmental policy. Thus, the research planning method developed here is applied to case studies focusing on a specific clean coal technology. The purpose of the case studies is both to demonstrate the research planning method and to obtain technology-specific conclusions regarding research strategies.

  5. Application of thermal technologies for processing of radioactive waste

    International Nuclear Information System (INIS)

    2006-12-01

    The primary objective of this publication is to provide an overview of the various thermal technologies for processing various solid, liquid, organic and inorganic radioactive waste streams. The advantages, limitations and operating experience of various thermal technologies are explained. This publication also goes beyond previous work on thermal processes by addressing the applicability of each technology to national or regional nuclear programmes of specific relative size (major advanced programmes, small to medium programmes, and emerging programmes with other nuclear applications). The most commonly used thermal processing technologies are reviewed, and the key factors influencing the selection of thermal technologies as part of a national waste management strategy are discussed. Accordingly, the structure and content of this publication is intended to assist decision-makers, regulators, and those charged with developing such strategies to identify and compare thermal technologies for possible inclusion in the mix of available, country-specific waste management processes. This publication can be used most effectively as an initial cutting tool to identify whether any given technology will best serve the local waste management strategy in terms of the waste generated, technical complexity, available economic resources, environmental impact considerations, and end product (output) of the technology. If multiple thermal technologies are being actively considered, this publication should be instrumental in comparing the technologies and assisting the user to reach an informed decision based on local needs, economics and priorities. A detailed set of conclusions is provided in Section 7

  6. Process for making unsaturated hydrocarbons using microchannel process technology

    Science.gov (United States)

    Tonkovich, Anna Lee [Dublin, OH; Yuschak, Thomas [Lewis Center, OH; LaPlante, Timothy J [Columbus, OH; Rankin, Scott [Columbus, OH; Perry, Steven T [Galloway, OH; Fitzgerald, Sean Patrick [Columbus, OH; Simmons, Wayne W [Dublin, OH; Mazanec, Terry Daymo, Eric

    2011-04-12

    The disclosed invention relates to a process for converting a feed composition comprising one or more hydrocarbons to a product comprising one or more unsaturated hydrocarbons, the process comprising: flowing the feed composition and steam in contact with each other in a microchannel reactor at a temperature in the range from about 200.degree. C. to about 1200.degree. C. to convert the feed composition to the product, the process being characterized by the absence of catalyst for converting the one or more hydrocarbons to one or more unsaturated hydrocarbons. Hydrogen and/or oxygen may be combined with the feed composition and steam.

  7. Methods of Formation of Students Technological Competence in the Speciality "Garment Industry and Fashion Design"

    Science.gov (United States)

    Zholdasbekova, S.; Karataev, G.; Yskak, A.; Zholdasbekov, A.; Nurzhanbaeva, J.

    2015-01-01

    This article describes the major components of required technological skills (TS) for future designers taught during the academic process of a college. It considers the choices in terms of the various logical operations required by the fashion industry including fabric processing, assembly charts, performing work operations, etc. The article…

  8. Process automation using combinations of process and machine control technologies with application to a continuous dissolver

    International Nuclear Information System (INIS)

    Spencer, B.B.; Yarbro, O.O.

    1991-01-01

    Operation of a continuous rotary dissolver, designed to leach uranium-plutonium fuel from chopped sections of reactor fuel cladding using nitric acid, has been automated. The dissolver is a partly continuous, partly batch process that interfaces at both ends with batchwise processes, thereby requiring synchronization of certain operations. Liquid acid is fed and flows through the dissolver continuously, whereas chopped fuel elements are fed to the dissolver in small batches and move through the compartments of the dissolver stagewise. Sequential logic (or machine control) techniques are used to control discrete activities such as the sequencing of isolation valves. Feedback control is used to control acid flowrates and temperatures. Expert systems technology is used for on-line material balances and diagnostics of process operation. 1 ref., 3 figs

  9. Refining processes in the copper casting technology

    Directory of Open Access Journals (Sweden)

    S. Rzadkosz

    2015-01-01

    Full Text Available The paper presents the analysis of technology of copper and alloyed copper destined for power engineering casts. The casts quality was assessed based on microstructure, chemical content analysis and strength properties tests. Characteristic deoxidising (Logas, Cup and modifying (ODM2, Kupmod2 formulas were used for the copper where high electrical conductivity was required. Chosen examples of alloyed copper with varied Cr and Zr content were studied, and the optimal heat treatment parameters were tested for a chosen chromium copper content, based on the criterion of hardness and electrical conductivity tests. Searching for materials with high wear resistance, the influence of variable silicone content on the properties of CuNiSi alloy was researched.

  10. Study on designing a complete pilot plant for processing sandstone ores in Palua-Parong area

    International Nuclear Information System (INIS)

    Le Quang Thai; Tran Van Son; Tran The Dinh; Trinh Nguyen Quynh; Vu Khac Tuan

    2015-01-01

    Design work is the first step of the construction and operation of pilot plant. Thus, the project Study on designing a complete pilot plant for processing sandstone ores in Palua - Parong area was conducted to design a pilot plant for testing entire technological process to obtain yellowcake. Based on a literature review of uranium ore processing technology in the world, information of ore and previous research results of uranium ore in PaLua - PaRong area at the Institute for Technology of Radioactive and Rare Elements, a suitable technological flowsheet for processing this ore has been selected. The size, location of the pilot plant and planed experiments has been selected during the implementation of this project, in which basic parameters, designed system of equipment, buildings, ect. were also calculated. (author)

  11. Directed Vapor Deposition: Low Vacuum Materials Processing Technology

    National Research Council Canada - National Science Library

    Groves, J. F; Mattausch, G; Morgner, H; Hass, D. D; Wadley, H. N

    2000-01-01

    Directed vapor deposition (DVD) is a recently developed electron beam-based evaporation technology designed to enhance the creation of high performance thick and thin film coatings on small area surfaces...

  12. Gasification — the process and the technology

    NARCIS (Netherlands)

    van Swaaij, Willibrordus Petrus Maria

    1981-01-01

    Thermochemical gasification of biomass can produce low, medium and high calorific value gases. The characteristics, applications and potential of the different processes and reactor types are discussed. The introduction of biomass gasification on a large or intermediate scale for the production of

  13. On the Benefit of Using Mobile Technologies in Business Processes

    OpenAIRE

    Deibert, Sina; Rothlauf, Franz

    2006-01-01

    The rapid technical progress in the development of mobile devices and technologies offers new possibilities for improving and streamlining the performance of business processes. However, only few successful mobile applications exist in the business area. This paper discusses the benefits an enterprise can gain by using mobile technologies in business processes. It presents general indicators to measure the performance of business processes and shows how these indicators must be adapted to be ...

  14. Technology Summary Advancing Tank Waste Retrieval And Processing

    International Nuclear Information System (INIS)

    Sams, T.L.; Mendoza, R.E.

    2010-01-01

    This technology overview provides a high-level summary of technologies being investigated and developed by Washington River Protection Solutions (WRPS) to advance Hanford Site tank waste retrieval and processing. Technology solutions are outlined, along with processes and priorities for selecting and developing them. This technology overview provides a high-level summary of technologies being investigated, developed, and deployed by WRPS to advance Hanford Site tank waste retrieval and processing. Transformational technologies are needed to complete Hanford tank waste retrieval and treatment by 12/31/2047. Hanford's underground waste storage tanks hold approximately 57 million gallons of radiochemical waste from nuclear defense production - more tank waste than any other site in the United States. In addition, the waste is uniquely complicated because it contains constituents from at least six major radiochemical processes and several lesser processes. It is intermixed and complexed more than any other waste collection known to exist in the world. The multi-faceted nature of Hanford's tank waste means that legally binding agreements in the Federal Facility Agreement and Consent Order (known as the Tri-Party Agreement) and between the Department of Energy (DOE) and its contractors may not be met using current vitrification schedules, plans, and methods. WRPS and the DOE are developing, testing, and deploying technologies to meet the necessary commitments and complete the DOE's River Protection Project (RPP) mission within environmentally acceptable requirements. Technology solutions are outlined, along with processes and priorities for selecting and developing them. DOE's Office of Environmental Management (EM) identifies the environmental management technology needs and the activities necessary to address them. The U.S. Congress then funds these activities through EM or the DOE field offices. Finally, an array of entities that include DOE site prime contractors and

  15. Development of the advanced CANDU technology -Development of basic technology for HWR design

    International Nuclear Information System (INIS)

    Seok, Ho Cheon; Seok, Soo Dong; Lee, Sang Yong

    1996-07-01

    It is believed that it is easier for Korea to become self-reliant in PHWR technology than in PWR technology, mainly because of the lower design pressure and temperature and because of the simplicity, economy, flexibility of the fuel cycle in comparison with PWR systems. Even though one has no doubt about the safety and the economics of the PHWR's that are now being operated or constructed in Korea. It is necessary to develop the advanced design technology for even safer and more economical PHWR systems to overcome the ever growing international resistance to sharing of nuclear technology and to meet the even more stringent requirements for the future public acceptance of nuclear power. This study is to develop the more advance design technology compared to the existing one, especially in the field of reactor physics, safety systems and safety evaluation to realize the above requirements. 71 tabs., 147 figs., 143 refs. (Author)

  16. Development of the advanced CANDU technology -Development of basic technology for HWR design-

    Energy Technology Data Exchange (ETDEWEB)

    Suk, Hoh Chun; Lee, Sang Yong; Suk, Soo Dong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-07-01

    It is believed that it is easier for Korea to become self-reliant in PHWR technology than in PWR technology, mainly because of the lower design pressure and temperature and because of the simplicity, economy, flexibility of the fuel cycle in comparison with PWR systems. Even though one has no doubt about the safety and the economics of the PHWR`s that are now being operated or constructed in Korea, it is necessary to develop the advanced design technology for even safer and more economical PHWR systems to overcome the ever growing international resistance to sharing of nuclear technology and to meet the even more stringent requirements for the future public acceptance of nuclear power. This study is to develop the more advance design technology compared to the existing one, by performing in-depth studies especially in the field of reactor physics, safety systems and safety evaluation to realize the above requirements. 90 figs, 50 tabs, 38 refs. (Author).

  17. Designing Catalysts for Clean Technology, Green Chemistry, and Sustainable Development

    Science.gov (United States)

    Meurig Thomas, John; Raja, Robert

    2005-08-01

    There is a pressing need for cleaner fuels (free or aromatics and of minimal sulfur content) or ones that convert chemical energy directly to electricity, silently and without production of noxious oxides and particulates; chemical, petrochemical and pharmaceutical processes that may be conducted in a one-step, solvent-free manner and that use air as the preferred oxidant; and industrial processes that minimize consumption of energy, production of waste, or the use of corrosive, explosive, volatile, and nonbiodegradable materials. All these needs and other desiderata, such as the in situ production and containment of aggressive and hazardous reagents, and the avoidance of use of ecologically harmful elements, may be achieved by designing the appropriate heterogeneous inorganic catalyst, which ideally should be cheap, readily preparable and fully characterizable, preferably under in situ reaction conditions. A range of nanoporous and nanoparticle catalysts that meet most of the stringent demands of sustainable development and responsible (clean) technology is described. Specific examples that are highlighted include the production of adipic acid (precursor of polyamides and urethanes) without the use of concentrated nitric acid nor the production of greenhouse gases such as nitrous oxide; the production of caprolactam (precursor of nylon) without the use of oleum and hydroxylamine sulfate; and the terminal oxyfunctionalization of linear alkanes in air. The topic of biocatalysis and sustainable development is also briefly discussed for the epoxidation of terpenes and fatty acid methyl esters; for the generation of polymers, polylactides, and polyesters; and for the production of 1,3-propanediol from corn.

  18. Uranium enrichment - A case study in indigenous process design and development

    International Nuclear Information System (INIS)

    Van Breda Smith, M.

    1987-01-01

    The position of indigenous process development and design is discussed in general and then with specific reference to uranium enrichment. The writer concludes, most specifically from the reported South African process design achievements in uranium enrichment, that when technology requirements for medium sized chemical projects have a strong or unique local reference, the broad and detail process design and development can and should be undertaken by indigenous engineering entities provided psychological barriers in local engineering management can be overcome

  19. Uranium enrichment - a case study in indigenous process design and development

    International Nuclear Information System (INIS)

    Smith, M.v.B.

    1987-01-01

    The position of indigenous process development and design is discussed in general and then with specific referecne to uranium enrichment. The writer concludes, most specifically from the reported South African process design achievements in uranium enrichment, that when technology requirements for medium sized chemical projects have a strong or unique local reference, the broad and detail process design and development can and should be undertaken by indigenous engineering entities provided psychological barriers in local engineering management can be overcome. 4 figs., 8 refs

  20. The Participation to The All Japan College of Technology Design Competition and The Trial of Art and Design Education

    Science.gov (United States)

    Kato, Kenji; Takeshita, Junji

    The works of Toyota national college of technology gets excellent result on structural design competition (bridge contest) of national college design competition. This paper reports planning and making process of these works. As increase strength of the structures, it is important point the determination of structural type by numerical analysis and test, and precision of production and idea of joining. Second, it reports the curriculum of special items connection with excellent works.