study of dental technology students of Federal School of Dental Therapy and Technology. Enugu, Nigeria ... HIV-infected individuals is also known to be achieved through the provision of ... to care for HIV-infected patients among this group of dental professionals ..... Table 7: Willingness to care versus training needs on care.
... produce dental materials such as dental prosthetics, dental composites, dental impressions, dental... materials such as dental prosthetics, dental composites, dental impressions, dental adhesives, and other... Technologies, a Wholly-Owned Subsidiary of Kerr Dental/Sybron Dental Specialities, Formally Known as Customedix...
Background: The rehabilitative dental care is important for maintaining adequate nutrition, guarding against wasting syndrome and malnutrition among human immunodeficiency virus (HIV)‑infected individuals. Aim: The aim of this study is to determine the Nigerian dental technology students' knowledge and ...
Argyraki, Aikaterini; Ou, Yiyu; Soerensen, L. H.
LEDs have a large potential in many dental and oral applications. Areas such as photo polymerization, fluorescence imaging, photodynamic therapy, and photoactivated disinfection are important future candidates for LED based diagnostics and treatment in dentistry.......LEDs have a large potential in many dental and oral applications. Areas such as photo polymerization, fluorescence imaging, photodynamic therapy, and photoactivated disinfection are important future candidates for LED based diagnostics and treatment in dentistry....
Khatoon, B; Hill, K B; Walmsley, A D
The aim of this study was to understand how new mobile technologies, such as smartphones and laptops, are used by dental students. A questionnaire was distributed to undergraduate dental students from years 1 to 4, at the University of Birmingham Dental School. Questionnaires were completed between February and April 2013. Two hundred and seventy questionnaires were completed. Laptops 55% (145) and smartphones 34% (88) were the most popular choice of device for connecting to the net and searching information. Laptops were preferred in first and second year. Students in year 3 preferred mobile phones, and by year 4 the use of mobile phones and laptops was similar. The top two application ideas chosen by students as the most useful on their smart phones were a dictionary for dental education (56%) and multiple choice questions (50%). Students who chose smartphones as their first choice or second choice of device strongly agreed that having the Internet on their smartphones had a positive impact on their dental education (55%). With laptops (48%), students preferred to be at home when using them while for smartphones (31%) they used them anywhere with a connection. E-mail (47%) and social networks (44%) were the top two Internet communication tools used most on laptops. Instant messaging was popular on smartphones (17%). Depending on the year in the course, laptops and smartphones are the most popular choice of device and desktop computers are the least popular. Applications on smartphones are very popular and instant messaging is an upcoming form of communication for students.
Bobich, Anita M; Mitchell, Betty L
Dental technology is one of the core allied dental health professions supporting the practice of dentistry. By definition, it is the art, science, and technologies that enable the design and fabrication of dental prostheses and/or corrective devices to restore natural teeth and supporting structures to fulfill a patient's physiological and esthetic needs. Dental technology educational programs are faced with serious challenges, including rapid changes in technology, inadequate funding for educational programs, and the need to develop curricula that reflect current industry needs. Better communications between dental technologists and practitioners are needed to gain greater recognition of the contribution that technologists make to patient health. Amid these challenges, the technology workforce is dedicated to providing patients with the best possible restorative dental prostheses. This article was written as part of the project "Advancing Dental Education in the 21 st Century."
Eng, G; Chen, A; Vess, T; Ginsburg, G S
The addition of genomic information to our understanding of oral disease is driving important changes in oral health care. It is anticipated that genome-derived information will promote a deeper understanding of disease etiology and permit earlier diagnosis, allowing for preventative measures prior to disease onset rather than treatment that attempts to repair the diseased state. Advances in genome technologies have fueled expectations for this proactive healthcare approach. Application of genomic testing is expanding and has already begun to find its way into the practice of clinical dentistry. To take full advantage of the information and technologies currently available, it is vital that dental care providers, consumers, and policymakers be aware of genomic approaches to understanding of oral diseases and the application of genomic testing to disease diagnosis and treatment. Ethical, legal, clinical, and educational initiatives are also required to responsibly incorporate genomic information into the practice of dentistry. This article provides an overview of the application of genomic technologies to oral health care and introduces issues that require consideration if we are to realize the full potential of genomics to enable the practice of personalized dental medicine. © 2011 John Wiley & Sons A/S.
Plangger, K; Bredican, J; Mills, A J; Armstrong, J
To keep pace with consumer adoption of smart mobile devices, such as smartphones and tablets, and the applications ('apps') developed for these devices, dental professionals should consider how this technology could be used to simultaneously improve both patient service experiences and dental practice management. Using U-Commerce as a theoretical lens, this article discusses the potential value of smart mobile technology to the dental practice context, with a particular focus on the unique and customisable capabilities of apps. To take full advantage of this technology, a process is outlined for identifying and designing bespoke dental apps that takes into account the unique advantages of these devices. Dental practices, with increasing financial and competitive pressures, may improve the efficiency and profitability of operations and better manage patients, employees and stakeholders by integrating smart mobile technology.
Zheng, Liwei; Yue, Li; Zhou, Min; Yu, Haiyang
Modern dentistry and dental education in China were first introduced from abroad by Dr. Lindsay in 1907. However, advancements in the field of dental laboratory technology did not occur to the same degree in specialties such as prosthodontics and orthodontics. Since the 1990s, orders from abroad demanding dental appliances surged as the image of China as the "world's factory" strengthened. The assembly line model, in which technicians work like simple procedure workers, was rapidly applied to denture production, while the traditional education system and apprenticeship systems demonstrated little progress in these years. The lack of advancement in dental laboratory technology education caused insufficient development in China's dental technology industry. In order to alter the situation, a four-year dental laboratory technology undergraduate educational program was established in 2005 by West China School of Stomatology, Sichuan University (WCSS, SCU). This program was based on SCU's undergraduate education and WCSS's junior college education systems. The program introduced scientific methods in relevant subjects into laboratory technicians' training and made many improvements in the availability of trained faculty, textbooks, laboratory facilities, and curriculum.
Bakr, Mahmoud M; Thompson, C Mark; Massadiq, Magdalena
Basic science courses are extremely important as a foundation for scaffolding knowledge and then applying it in future courses, clinical situations as well as in a professional career. Anatomical sciences, which include tooth morphology, oral histology, oral embryology, and head and neck anatomy form a core part of the preclinical courses in dental technology programs. In this article, the importance and relevance of anatomical sciences to dental personnel with no direct contact with patients (dental technicians) and limited discipline related contact with patients (dental prosthetists) is highlighted. Some light is shed on the role of anatomical sciences in the pedagogical framework and its significance in the educational process and interprofessional learning of dental technicians and prosthetists using oral biology as an example in the dental curriculum. To conclude, anatomical sciences allow dental technicians and prosthetists to a gain a better insight of how tissues function, leading to a better understanding of diagnosis, comprehensive treatment planning and referrals if needed. Patient communication and satisfaction also increases as a result of this deep understanding of oral tissues. Anatomical sciences bridge the gap between basic science, preclinical, and clinical courses, which leads to a holistic approach in patient management. Finally, treatment outcomes are positively affected due to the appreciation of the macro and micro structure of oral tissues. Anat Sci Educ 10: 395-404. © 2016 American Association of Anatomists. © 2016 American Association of Anatomists.
Beebe, Catherine R R; Gurenlian, JoAnn R; Rogo, Ellen J
A growing body of literature suggests that today's learners have changed and education must change as well since Millennial generation students expect technology to be used in their coursework. This study sought to determine what educational technology is being used in U.S. dental hygiene programs, what student and faculty perceptions are of the effectiveness of technology, and what barriers exist to implementing educational technology. A stratified random sample of 120 entry-level dental hygiene programs nationwide were invited to participate in a survey. Fourteen programs participated, yielding a pool of 415 potential individual participants; out of those, eighty-four student and thirty-eight faculty respondents were included in the analysis, a total of 122. Results were analyzed using descriptive statistics and a Mann-Whitney U test (peducational technology in all areas except clickers and wikis. The faculty members tended to rate the effectiveness of educational technology higher than did the students. The greatest perceived barrier to implementing technology was technical difficulties. This study suggests that support services should be available to faculty and students to ensure successful implementation of technology. Dental hygiene educators have adopted many types of educational technology, but more data are needed to determine best practices.
Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.
This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the dental hygiene technology program. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies. Section II…
Анатолий Иванович Бабенко
Conclusion. The presented information and analytical technology of the use of the personalized database of territorial dental polyclinic has allowed revealing not only the nature of appealing of adult population for the dental care, but also defining the demand for dental technologies of the general, therapeutic and surgical profiles, establishing the significance of separate types of technologies in quantitative expression.
Kolahi, Jafar; Fazilati, Mohamad
Caries is caused when the pH at the tooth surface drops below 5.5. A miniaturized and autonomous pH monitoring nodes can be attached to the tooth surface, like a tooth jewel. This intelligent sensor includes three components: (a) digital micro pH meter, (b) power supply, (c) wireless communicating device. The micro pH meter facilitates long term tooth surface pH monitoring and providing real time feedback to the patients and dental experts. Power supply of this system will be microfabricated biocatalytic fuel cell (enzymatic micro-battery) using organic compounds (e.g. formate or glucose) as the fuel to generate electricity. When micro pH meter detects the pH lower than 5.5, wireless Bluetooth device sends a caution (e.g. "you are at risk of dental caries") to external monitoring equipment such as mobile phone or a hands-free heads. After reception of the caution, subjects should use routine brushing and flossing procedure or use a medicated chewing gum (e.g. chlorhexidine containing chewing gum) or rinse with a mouthwash.
Full Text Available Objective: In dental and medical education, information and communication technology (ICT has been playing an important role and its use is rapidly increasing. In developing countries, however, information technology is still only available to a minority of health professionals. The present study aimed to assess the level of computer use among dental undergraduate students pursuing their career at a private dental institution in India.Materials and Methods: The study population comprised dental undergraduate students from first to fourth year pursuing their career in a private dental institution of India. Informationtechnology practices were assessed using a questionnaire that consisted of 14 questions.Results: In total, 247 students with an overall response rate of 66% participated in the study. Only 58.3% of the study population mentioned that they had access to computers.Students from preclinical years reported to be competent in IT skills more frequently than the clinical year students (chi square test, P=0.007. Compared to women, men used computers more regularly both for academic activities (P=0.082 and personal use (P=0.006.Similarly, students of clinical years used computers more than preclinical students for both purposes (academic activities, P=0.045; personal use, P=0.124.Conclusion: The present study revealed that computer literacy of Indian dental undergraduate students was comparable with students of other countries whereas accessibility of IT sources was poor. Expansion of computer-assisted learning which requires careful strategic planning, resource sharing, staff incentives, active promotion of multidisciplinary working, and effective quality control should be implemented.
Butali, A; Adeyemo, W L; Akinshipo, A O; Fashina, A; Savage, K O
The aim of this study was to investigate the use of information technology amongst dental students, dental nursing students and resident doctors in training at the faculty of dental Surgery University of Lagos. A structured questionnaire was distributed to 58 clinical dental students in 4 th and 5 th years of training in the 2010/2011 academic year, 36 dental nursing students and 63 resident doctors undergoing specialist training. All participants have access to the computers, 2.5% within the University and 31% at home and internet cafes and about 50% have the basic skills required. A significant difference was observed between the resident doctors and clinical dental students (P = 0.003), between resident doctors and dental nursing students (P = 0.0001) when the use of computer for study was compared. Over 95% of participants have access to internet and about 50% of them use the internet for their studies. A significant difference (P = 0.005) was observed between clinical dental students and dental nursing students that use the internet and word processing. The resident doctors used the computers for multimedia and MedLine search tools more than clinical dental students (P = 0.004) and dental nursing students (0.0006). The findings of the study show that dental students and resident doctors in training have the requisite knowledge to operate the computer for use in their study and personal activities.
Negrutiu, Meda Lavinia; Sinescu, Cosmin; Topala, Florin Ionel; Ionita, Ciprian; Goguta, Luciana; Marcauteanu, Corina; Rominu, Mihai; Podoleanu, Adrian Gh.
Dental prosthetic restorations have to satisfy high stress as well as aesthetic requirements. In order to avoid deficiencies of dental prostheses, several alternative systems and procedures were imagined, directly related to the material used and also to the manufacturing technology. Increasing the biomechanical comportment of polymeric materials implies fiber reinforcing. The different fibers reinforcing products made very difficult the evaluation of their performances and biomechanical properties analysis. There are several known methods which are used to assess the quality of dental prostheses, but most are invasive. These lead to the destruction of the samples and often no conclusion could be drawn in the investigated areas of interest. Using a time domain en-face OCT system, we have recently demonstrated real time thorough evaluation of quality of various dental treatments. The aim of this study was to assess the quality of various polymeric materials used in dental technology and to validate the en face OCT imagistic evaluation of polymeric dental prostheses by using scanning electron microscopy (SEM) and microcomputer tomography (μCT). SEM investigations evidenced the nonlinear aspect of the interface between the polymeric material and the fiber reinforcement and materials defects in some samples. The results obtained by microCT revealed also some defects inside the polymeric materials and at the interfaces with the fiber reinforcement. The advantages of the OCT method consist in non-invasiveness and high resolution. In addition, en face OCT investigations permit visualization of the more complex stratified structure at the interface between the polymeric material and the fiber reinforcement.
Kobayashi, Tatiana Yuriko; Vitor, Luciana Lourenço Ribeiro; Carrara, Cleide Felício Carvalho; Silva, Thiago Cruvinel; Rios, Daniela; Machado, Maria Aparecida Andrade Moreira; Oliveira, Thais Marchini
Dental enamel defects (DEDs) are faulty or deficient enamel formations of primary and permanent teeth. Changes during tooth development result in hypoplasia (a quantitative defect) and/or hypomineralisation (a qualitative defect). To compare technology-based diagnostic methods for detecting DEDs. Two-hundred and nine dental surfaces of anterior permanent teeth were selected in patients, 6-11 years of age, with cleft lip with/without cleft palate. First, a conventional clinical examination was conducted according to the modified Developmental Defects of Enamel Index (DDE Index). Dental surfaces were evaluated using an operating microscope and a fluorescence-based device. Interexaminer reproducibility was determined using the kappa test. To compare groups, McNemar's test was used. Cramer's V test was used for comparing the distribution of index codes obtained after classification of all dental surfaces. Cramer's V test revealed statistically significant differences (P < .0001) in the distribution of index codes obtained using the different methods; the coefficients were 0.365 for conventional clinical examination versus fluorescence, 0.961 for conventional clinical examination versus operating microscope and 0.358 for operating microscope versus fluorescence. The sensitivity of the operating microscope and fluorescence method was statistically significant (P = .008 and P < .0001, respectively). Otherwise, the results did not show statistically significant differences in accuracy and specificity for either the operating microscope or the fluorescence methods. This study suggests that the operating microscope performed better than the fluorescence-based device and could be an auxiliary method for the detection of DEDs. © 2017 FDI World Dental Federation.
Alameri, S S; Aarts, J M; Smith, M; Waddell, J N
To provide a snapshot of the New Zealand dental technology industry and influencing factors. Developing an understanding of the commercial dental laboratory environment in New Zealand can provide insight into the entire dental industry. A web-based survey was the primary method for data collection, with separate questionnaires used for dental laboratory owners and dental technician employees. The mean net income for dental laboratory owners in New Zealand was similar to that of the United Kingdom, at $40.50 per hour. Clinical dental technicians are the highest paid employees, with a mean of $33.49 per hour. The mean technical charge for complete dentures was $632.59; including clinical services, it was $1907.00. The mean charge for a porcelain-fused-to-metal (PFM) crown was $290.27. Dental laboratory owners expressed fear about the possibility of losing dental clients to overseas laboratories due to the availability and cheap charge of offshore work. Only 25.4% of dental laboratories surveyed had computer-aided design (CAD) facilities, and even fewer (7.9%) had computer-aided manufacturing (CAM) systems. Clinical dental technology appears to be prospering. The dental technology industry appears to be adapting and remains viable, despite facing many challenges.
Uribe, S; Mariño, R J
As part of a larger cross-country survey of dental students, students from the School of Dentistry, The University of Valparaiso, were invited to participate in a study to describe their use of information and communication technology (ICT). Information was derived from a 124-item questionnaire which included 14 socio-demographic items and 29 items asking about ICT use. ICT items were derived from a University of Birmingham, UK, battery. Data was collected in July and August 2004. A total of 162 of the 249 dental students participated in the study. The average age of students was 21.0 years (SD 2.4 years). The majority of participants (62.1%) were female. All participants had access to a computer, and 96.4% used the Internet. Most students had home Internet connections (73.4%). The most commonly used Internet sites on at least a weekly basis were: email (92.2%); and search engines (88.3%). However, a very few (21.1%) used the Internet to search for dental information for their studies on at least a weekly basis. Furthermore, although the majority (70.4%) found Internet use easy/very easy, 56.2% indicated that any search for information was easy/very easy. The majority (72.2%) indicated that the use of virtual education would not affect their class attendance. The final multivariate model explained 26% of the variance in ICT use, significant predictors for ICT use were gender, year of study, level of difficulty in using Internet, and place of Internet use. However, Internet use was mostly for non-dental purposes.
i A REVIEW OF EMERGING TECHNOLOGIES FOR DETECTON AND DIAGNOSIS OF DENTAL CARIES by Walter B. Volinski Jr. Lieutenant... CARIES WALTER B. VOLINSKI JR. DDS, COMPREHENSIVE DEPARTMENT, 2016 Thesis directed by: Ling Ye, DDS, PhD LCDR, DC, USN Department of Dental...diagnosis of dental caries and to compare their efficacy and accuracy to visual, tactile, and radiographic examination. Methods: The technologies reviewed
Gadbury-Amyot, Cynthia C
Dental hygienists will need to embrace 21st century technology to adapt to workplace settings. To stay relevant in the workforce, dental hygienists need mastery of new skills and technologies. The purpose of this paper is to elucidate the vast array of technological advances impacting dental practice and the consequent implications for oral health care providers. New technologies have provided unparalleled opportunities for degree and career advancement for dental hygienists. Advances in science and technology are providing patients with better quality and more convenient oral health care. Dental hygienists need technological skills that enable them to fully utilize technology as a strategy for consultation with dentists and other health care professionals and for other purposes. Continuing education and life-long learning factor into preparing dental hygienists for 21st century technologies. With technological advances, less adaptive professionals could potentially see a decrease in demand for their services. Possessing a high level of knowledge of dentistry and dental hygiene does not ensure a position in the workforce. Knowledge of technologies and associated skills are required for quality patient care and career and personal growth. Copyright © 2014 Elsevier Inc. All rights reserved.
% at home and internet cafes and about 50% have the basic skills required. A significant difference was observed between the resident doctors and clinical dental students (P = 0.003), between resident doctors and dental nursing students (P ...
Gadbury-Amyot, Cynthia C; Singh, Amul H; Overman, Pamela R
Among the challenges leaders in dental and allied dental education have faced in recent years is a shortage of well-qualified faculty members, especially in some specialty areas of dentistry. One proposed solution has been the use of technology. At the University of Missouri-Kansas City School of Dentistry, the departure of a faculty member who taught the highly specialized content in oral histology and embryology provided the opportunity to implement distance delivery of that course. The course is taught once a year to a combined group of dental and dental hygiene students. Previous to spring semester of 2009, the course was taught using traditional face-to-face, in-class lectures and multiple-choice examinations. During the spring semesters of 2009, 2010, and 2011, the course was taught using synchronous and asynchronous distance delivery technology. Outcomes for these courses (including course grades and performance on the National Board Dental Examination Part I) were compared to those from the 2006, 2007, and 2008 courses. Students participating in the online hybrid course were also given an author-designed survey, and the perceptions of the faculty member who made the transition from teaching the course in a traditional face-to-face format to teaching in an online hybrid format were solicited. Overall, student and faculty perceptions and student outcomes and course reviews have been positive. The results of this study can provide guidance to those seeking to use technology as one method of curricular delivery.
Oh, Hye-Young; Jung, Hoi-In; Lee, Jeong-Woo; de Jong, Elbert de Josselin; Kim, Baek-Il
The purpose of this study was to determine the usefulness of a quantitative light-induced fluorescence (QLF) technology in detecting dental restorations by comparing the detection ability of dental hygiene students between using conventional visual inspection alone and visual inspection combined with QLF technology. The subjects of this study comprised 92 dental hygiene students. The students assigned to the control group only used white-light images to visually assess the mouth environment, while those in the experimental group additionally used fluorescence images. Using the test results of an experienced inspector as a reference value, the agreement between the reference value and the evaluation results of the students in the experimental and control groups was evaluated using Cohen's kappa and the percentage agreement. The subjects were then classified into groups covering three percentage ranges according to the score distribution and agreement values of the three groups were compared. The percentage agreement was calculated according to the type of dental restorations. The mean kappa value was significantly higher in the experimental group than the control group (0.70 vs 0.60, ptechnology increased by 8% more in the middle and bottom percentage groups than in the top percentage group (ptechnology with conventional visual inspections could improve the ability to detect dental restorations and distinguish sound teeth from aesthetic restorations. Copyright © 2016 Elsevier B.V. All rights reserved.
Sabalic, Maja; Schoener, Jason D.
Virtual reality-based technologies have been used in dentistry for almost two decades. Dental simulators, planning software and CAD/CAM (computer-aided design/computer-aided manufacturing) systems have significantly developed over the years and changed both dental education and clinical practice. This study aimed to assess the knowledge, attitudes…
Xue, Shi-hua; Lv, Pei-jun; Wang, Yong; Zhao, Yu; Zhang, Ting
To explore the three dimensional(3D)bioprinting technology, using human dental pulp cells (hDPCs) mixture as bioink and to lay initial foundations for the application of the 3D bioprinting technology in tooth regeneration. Imageware 11.0 computer software was used to aid the design of the 3D biological printing blueprint. Sodium alginate-gelatin hydrosol was prepared and mixed with in vitro isolated hDPCs. The mixture contained 20 g/L sodium alginate and 80 g/L gelatin with cell density of 1×10(6)/mL. The bioprinting of hDPCs mixture was carried out according to certain parameters; the 3D constructs obtained by printing were examined; the viability of hDPCs after printing by staining the constructs with calcein-AM and propidium iodide dye and scanning of laser scanning confocal microscope was evaluated. The in vitro constructs obtained by the bioprinting were cultured, and the proliferation of hDPCs in the constructs detected. By using Imageware 11.0 software, the 3D constructs with the grid structure composed of the accumulation of staggered cylindrical microfilament layers were obtained. According to certain parameters, the hDPCs-sodium alginate-gelatin blends were printed by the 3D bioprinting technology. The self-defined shape and dimension of 3D constructs with the cell survival rate of 87%± 2% were constructed. The hDPCs could proliferate in 3D constructs after printing. In this study, the 3D bioprinting of hDPCs mixtures was realized, thus laying initial foundations for the application of the 3D bioprinting technology in tooth regeneration.
Sheridan, C; Gorman, T; Claffey, N
The aim of this paper is to explore the profile of dental nursing students in the National Dental Nurse Training Programme of Ireland and their adjustment to a technology-assisted learning environment. Evaluation by students of the course and their reactions to the course were analysed. Dental nurses must possess the skills and knowledge to proficiently function in the modern day dental surgery. The implementation of a dental nurse programme that is heavily reliant on technology has started to create a group of dental nurses equipped with basic skills to access and retrieve information over a lifetime. However, the transition to a technology-assisted learning environment including online learning activities requires adaptation and expertise by educators and students alike. Careful evaluation and stakeholder feedback is imperative in the creation and maintaining of a quality programme. In conclusion, the students in this study responded well to the transition to a technology-based learning environment. Furthermore, the findings of this study suggest that the use of an online environment is an effective and stimulating learning environment for the students of a dental nurse programme; however, familiarity skills and knowledge of information technology is a prerequisite for success.
To arrive at a learning situation conducive to a scientific approach in dental school teaching of diagnosis, treatment, prescription, and judgment of prognosis, it is necessary to strengthen the scientific environment in dental schools, increase scientifically trained faculty, and guarantee student involvement in research. (MLW)
Feng, Ruoxue; Lengner, Chistopher
In this review, we summarize the current literature regarding the isolation and characterization of dental tissue-derived stem cells and address the potential of these cell types for use in regenerative cell transplantation therapy. Looking forward, platforms for the delivery of stem cells via scaffolds and the use of growth factors and cytokines for enhancing dental stem cell self-renewal and differentiation are discussed. We aim to understand the developmental origins of dental tissues in an effort to elucidate the molecular pathways governing the genesis of somatic dental stem cells. The advantages and disadvantages of several dental stem cells are discussed, including the developmental stage and specific locations from which these cells can be purified. In particular, stem cells from human exfoliated deciduous teeth may act as a very practical and easily accessibly reservoir for autologous stem cells and hold the most value in stem cell therapy. Dental pulp stem cells and periodontal ligament stem cells should also be considered for their triple lineage differentiation ability and relative ease of isolation. Further, we address the potentials and limitations of induced pluripotent stem cells as a cell source in dental regenerative. From an economical and a practical standpoint, dental stem cell therapy would be most easily applied in the prevention of periodontal ligament detachment and bone atrophy, as well as in the regeneration of dentin-pulp complex. In contrast, cell-based tooth replacement due to decay or other oral pathology seems, at the current time, an untenable approach.
Brownstein, Sheri A; Murad, Aseel; Hunt, Ronald J
With dentistry rapidly evolving as new technologies are developed, this study aimed to identify the penetration of emerging dental technologies into the curricula of U.S. dental schools and to explore whether certain school characteristics affected adoption of these technologies. A 19-question survey was sent to the academic deans of all 62 U.S. dental schools. In addition to questions about characteristics of the school, the survey asked respondents to indicate where in their curricula the technology was incorporated: preclinical didactic, preclinical laboratory, clinical didactic, and/or clinical patient experience. Of 62 eligible schools, 33 useable responses were received, for a 52% response rate. The results showed that the greatest overall penetration of dental technologies was in preclinical didactic courses and the lowest was in the preclinical laboratory. Specific technologies implemented in the largest percentage of responding schools were digital radiography and rotary endodontics. The technologies with the lowest penetration were CAD/CAM denture fabrication and hard tissue lasers. These results suggest that the incorporation of technology into dental schools is following that of private practice as the most widely adopted technologies were those with the greatest acceptance and use in private practice. Among the respondents, factors such as class size and age of the school had greater impact on incorporation of technology than funding source and geographic location.
Pacauskiene, Ingrida M; Smailiene, Dalia; Siudikienė, Jolanta; Savanevskyte, Julija; Nedzelskiene, Irena
The aim of the present study was to assess self-reported oral health habits, attitudes, lifestyle between the sample groups of preclinical and clinical dental and technology students in Lithuania using the Hiroshima University Dental Behavioral Inventory (HU-DBI), and to evaluate the impact of education on their behavior and self-reported oral health. A sample of 183 dental and 75 technology students at the Lithuanian University of Health Sciences, Medical Academy, Faculty of Odontology, and Kaunas University of Technology completed the Lithuanian version the HU-DBI questionnaire with 11 additional items. The data were analyzed using the "SPSS 19.0 for Windows" software package. The mean HU-DBI score of clinical final-year dentistry students was significantly higher (p=0.001) than the score of the preclinical group (6.81 (1.2) and 5.96 (1.5), respectively). The mean scores of both groups of dental students were significantly (ptechnology group (5.37 (1.8)). Oral health behaviors and knowledge were superior in dental students. Dental education had a significant positive impact on the oral health and behavior improvement. The attitudes of the Lithuanian dental students should be further improved by initiating a comprehensive program that would emphasize the importance of oral hygiene before the clinical program starts.
Bartling, William C.; Schleyer, Titus K.L.
Historically, an anatomic dental chart is a compilation of color-coded symbols and numbers used within a template, either paper or computerized, to create a graphic record of a patient’s oral health status. This poster depicts how Geospatial Information System (GIS) technology can be used to create an accurate, current anatomic dental chart that contains detailed information not present in current charting systems.
A patient entering a dental office is often greeted and then checked in through the practice management system's digital appointment book. The provider is notified by an electronic signal that is visual, audible, or both. The patient is led to the treatment area and sits in a dental chair which is adjusted to the individual's size and position for the treatment, and the light is positioned. Sometimes a radiograph is taken, local anesthetic is delivered, and a handpiece--air turbine or electric--is used for the procedure. How different is this process today from a dentist treating a patient in 1864?
Myhrer, T; Evans, J L; Haugen, H K; Gorman, C; Kavanagh, Y; Cameron, A B
Dental technology programmes of study must prepare students to practice in a broad range of contemporary workplaces. Currently, there is limited evidence to benchmark dental technology education - locally, nationally or internationally. This research aims to improve consistency, transparency and portability of dental technology qualifications across three countries. Data were accessed from open-source curriculum documents and five calibrated assessment items. Three institutions collaborated with Oslo and Akershus University College, Norway; Trinity College Dublin, Ireland; and Griffith University, Australia. From these, 29-44 students completed 174 assessments. The curricula reflect the community needs of each country and display common themes that underpin professional dental technology practice. Assessment results differed between institutions but no more than a normal distribution. Face-to-face assessment moderation was critical to achieve consistency. This collaborative research has led to the development of a set of guidelines for other dental technology education providers interested in developing or aligning courses internationally to enhance the portability of qualifications. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Azodo, Cc; Omili, Ma; Akeredolu, Pa
The rehabilitative dental care is important for maintaining adequate nutrition, guarding against wasting syndrome and malnutrition among human immunodeficiency virus (HIV)-infected individuals. The aim of this study is to determine the Nigerian dental technology students' knowledge and misconceptions about HIV infection and their willingness to care for HIV-infected patients. This descriptive cross-sectional study of dental technology students of Federal School of Dental Therapy and Technology Enugu, Nigeria was conducted in 2010. Data was subjected to descriptive, non-parametric and parametric statistics using the statistical package for the social sciences (SPSS) version 17.0 (Chicago Illinois, USA). P 4.0% (8/198) of the respondents erroneous described HIV as harmless, self-limitation and antibiotics responsive infection respectively. Of the respondents, 78.8% (156/198) and 83.3% (165/198) of them expressed willingness to care for HIV-infected patients and expressed need for training in the clinical care of HIV-infected patients respectively. Overall, the respondents opined that the dental therapists are the most suitable dental professional to pass HIV-related information to patients in the dental setting ahead of dentists and dental surgery assistants. The expressed willingness to care for HIV-infected patients, knowledge about the mode of HIV transmission and prevention among the respondents were high with existent misconceptions. There were no significant differences in the knowledge about HIV infection and willingness to care for HIV-infected patients among respondents in the lower class and those in upper class.
Stein, Corey D; Eisenberg, Elise S; O'Donnell, Jean A; Spallek, Heiko
Many dental schools are currently struggling with the adoption of emerging technologies and the incorporation of these technologies into the educational process. Dental students exhibit an increasing degree of digital comfort when using social networking, mobile devices, search engines, or e-textbooks. Although the majority of students might consider themselves to be very skilled at using information technology, many faculty members would claim the opposite when evaluating their own knowledge and skills in the use of technology. As the use of technology, both formally and informally, continues to increase, dental educators are faced with many questions, such as: Does students' digital comfort disguise a lack of information literacy? What is the appropriate path of implementing technology into teaching and learning, and how can institutions support such an implementation? This article surveys a series of myths that exist about the use of technology in education and raises questions about their validity and how dental educators can avoid being misled by them.
Blackwell, E; Nesbit, M; Petridis, H
Statement of the problem Digital workflows (CAD/CAM) have been introduced in dentistry during recent years. No published information exists on dental technicians' use and reporting of this technology.Purpose The aim of this cross sectional survey was to identify the extent digital technology has infiltrated the workplace and to investigate the factors affecting the use of CAD-CAM technology by dental laboratory technicians within Ireland and the UK.Materials and methods A web-based questionnaire was composed (Opinio, Object Planet Inc. Oslo, Norway) and distributed to UK and Irish dental technicians. Answers to all questions were anonymous and grouped such that general information was gathered initially, followed by branching of the survey into two sections depending on whether or not the respondent worked with CAD-CAM technology. Results were compiled and statistical analysis (Fisher's Exact test, SPSS, IBM, Armonk, New York, USA) was performed in order to investigate any correlation between various demographic variables and the answers provided.Results The survey was distributed to 760 UK technicians and 77 Irish technicians. The total number of completed surveys was 105, which yielded a total response rate of 14%. Most technicians reported using some form of CAD/CAM aspect in the workflow, and this was more significant for technicians working in large laboratories. Most training received was company-led. Large laboratories were also significantly correlated with less outsourcing of CAD/CAM work and a change in dental material use leading to the increase of zirconia and the decrease of noble alloys. Dental technicians did not report any significant change in working relationships and staffing as a result of CAD/CAM incorporation. High initial investment cost was the most common reason quoted from non-users, along with the lack of such technology in their working environment.
Full Text Available The aim of the present paper is to make a review of the modern trends in the development of the technologies for production of dental constructions. Three are the main trends in production technologies in dentistry last 30 years: digitalization, simulation and implementation of additive technologies. The simulation occurred first and due to the computers development it underwent fast progress from the mathematical calculations and analytical analysis to the 3D modeling and visualization. Thus Computer Aided Engineering (CAE was developed, allowing dental constructions with optimal design to be produced by optimal technological regimes. The first Computer Aided Design (CAD – Computer Aided Manufacturing (CAM systems were created in 1970s as a result of the digitalization. In this mode of operation at first virtual 3D model is generated by CAD, which then is used for production of the real construction by CAM. The CAD-CAM systems allow fabrication of dental restorations which is difficult or impossible to be manufactured by conventional technologies. The development of CAD unit runs from indirect scanning of the plaster model for obtaining data for the 3D model to direct scanning of the prosthesis area. While the development of CAM unit leads to direct manufacturing of the real dental construction using subtractive or additive technologies. The future development of the CAD-CAM systems as a whole characterizes with transition from closed to open access systems, which make them more flexible. In the late 1980sthe new approach to the production of constructions appeared – by addition of material layer by layer. The additive technologies were developed. They characterize with building of one layer at a time from a powder or liquid that is bonded by means of melting, fusing or polymerization. Stereo lithography, fused deposition modeling, selective electron beam melting, laser powder forming and inkjet printing are the methods, mostly used in
Porojan, Sorin; Bîrdeanu, Mihaela; Savencu, Cristina; Porojan, Liliana
The integration of digitalized processing technologies in traditional dental restorations manufacturing is an emerging application. The objective of this study was to identify the different structural and morphological characteristics of Co-Cr dental alloys processed by alternative manufacturing techniques in order to understand the influence of microstructure on restorations properties and their clinical behavior. Metallic specimens made of Co-Cr dental alloys were prepared using traditional casting (CST), and computerized milling (MIL), selective laser sintering (SLS) and selective laser melting (SLM). The structural information of the samples was obtained by X-ray diffraction, the morphology and the topography of the samples were investigated by Scanning Electron Microscopy and Atomic Force Microscope. Given that the microstructure was significantly different, further differences in the clinical behavior of prosthetic restorations manufactured using additive techniques are anticipated.
Clement C. Azodo
Full Text Available Objective: To determine the tooth brushing, tongue cleaning and snacking behaviour of dental technology and therapist students. Methods: A descriptive cross-sectional study of students of Federal School of Dental Therapy and Technology Enugu, Nigeria. Self-administered questionnaire was used to obtain information on demography, frequency, duration and technique of tooth brushing and tongue cleaning as well as information on consumption of snacks. Results: A total of 242 students responded. Dental technology students made up 52.5% of the respondents and dental therapist in training made up 47.5%. Majority (63.2% of the respondents considered the strength of tooth brush when purchasing a tooth brush and 78.9% use tooth brushes with medium strength. Seven-tenth (71.9% of the respondents brush their teeth twice daily and 52.1% brush for 3–5 minutes. About one-third (30.2% brush their teeth in front of a mirror. Chewing stick was used by 51.7% of respondents in addition to the use of tooth brush. Tongue cleaning was done by 94.2% with only 9.5% using a tongue cleaner. Only 20.2% reported regular snacks consumption. Nine-tenth (90.4% of respondents were previously involved in educating others, apart from their colleagues, on tooth brushing. Conclusion: This survey revealed that most of the dental therapy and technology students had satisfactory tooth-brushing behaviour. The zeal to educate others about proper tooth brushing revealed in this study suggests that the students may be helpful in oral health promotion.
Alexander, Nick; Dunn, Catherine; Hill, Stanley; Lindsay, William
As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…
Schleyer, Titus K; Thyvalikakath, Thankam P; Spallek, Heiko; Dziabiak, Michael P; Johnson, Lynn A
The capabilities of information technology (IT) have advanced precipitously in the last fifty years. Many of these advances have enabled new and beneficial applications of IT in dental education. However, conceptually, IT use in dental schools is only in its infancy. Challenges and opportunities abound for improving how we support clinical care, education, and research with IT. In clinical care, we need to move electronic dental records beyond replicating paper, connect information on oral health to that on systemic health, facilitate collaborative care through teledentistry, and help clinicians apply evidence-based dentistry and preventive management strategies. With respect to education, we should adopt an evidence-based approach to IT use for teaching and learning, share effective educational content and methods, leverage technology-mediated changes in the balance of power between faculty and students, improve technology support for clinical teaching, and build an information infrastructure centered on learners and organizations. In research, opportunities include reusing clinical care data for research studies, helping advance computational methods for research, applying generalizable research tools in dentistry, and reusing research data and scientific workflows. In the process, we transition from a focus on IT-the mere technical aspects of applying computer technology-to one on informatics: the what, how, and why of managing information.
Revilla León, M; Klemm, I M; García-Arranz, J; Özcan, M
An edentulous patient was rehabilitated with maxillary metal-ceramic and mandibular metal-resin implant-supported fixed dental prosthesis (FDP). Metal frameworks of the FDPs were fabricated using 3D additive manufacturing technologies utilizing selective laser melting (SLM) and electron beam melting (EBM) processes. Both SLM and EBM technologies were employed in combination with computer numerical control (CNC) post-machining at the implant interface. This report highlights the technical and clinical protocol for fabrication of FDPs using SLM and EBM additive technologies. Copyright© 2017 Dennis Barber Ltd.
Wrzosek, Mariusz; Warner, Gary; Donoff, R Bruce; Howell, Thomas H; Karimbux, Nadeem
The purpose of this project is to assess how information technology (IT) is being implemented and managed in U.S. dental schools. Recent advances in IT have restructured many of the administrative, curricular, and clinical functions in dental schools. Purchasing hardware and software and hiring personnel to maintain IT present significant financial and administrative commitments for these schools. A nine-question survey was sent to all U.S. dental schools via email with a follow-up postal mailing. Forty-six surveys were returned (83.6 percent response rate). The analysis indicates that dental schools are managing IT in vastly different ways. For example, 71 percent of the schools report a centralized structure, and 61 percent have a line item in the budget to manage IT. On average there are 4.4 full-time equivalents hired to manage IT, with the majority of these people being trained in IT (eight schools reported dually trained IT/dental personnel). The majority of schools report using software to manage their admissions process (70 percent), curriculum analysis (72 percent), and delivery of curriculum content (72 percent), as well as to manage their student clinics (91 percent, business aspect; 87 percent, patients; 65 percent, grading on clinic floor; 76 percent, managing clinical evaluations) and faculty practices (85 percent, business aspect; 65 percent, patients). The use of multimedia (50 percent) and simulation (52 percent) in the preclinical area is mixed. The purchase of laptops (24 percent) and PCs (11 percent) is required in almost a third of all schools participating in this survey. Dental schools in the United States are managing IT in a variety of different ways, using various internally and commercially available tools. The cost to institutions can be large and is usually handled in centralized structures in the school with fixed budgets. The results of this survey can be used to assist schools in the planning and implementation of IT at their
van der Zande, M M; Gorter, R C; Wismeijer, D
Digital technologies are proliferating into dental practices. While their technical attributes have often been studied, it remains unclear why some dentists adopt and use these technologies more than others. AIM To explore the incentives for and barriers against accepting and using digital dental technologies. Eleven semi-structured qualitative interviews were conducted with experts in dentistry, dental technology and dental education in the Netherlands. Dentists' acceptance and use of digital technologies are to varying degrees driven by the perceived advantages over analogue methods, perceived influence on treatment quality, dentists' personal and professional orientation, and social influence from peers and external groups. These effects are complemented by personal and dental-practice characteristics. The findings suggest that there are large differences in motivation to adopt and use digital technologies between early adopters, late adopters and non-adopters, which should be examined in greater detail. We recommend that educators, dentists, and representatives of the dental industry who deal with the diffusion of these technologies take account of dentists' widely different attitudes to digitalisation.
Digital technologies are proliferating into dental practices. While their technical attributes have often been studied, it remains unclear why some dentists adopt and use these technologies more than others. AIM To explore the incentives for and barriers against accepting and using digital dental technologies. Eleven semi-structured qualitative interviews were conducted with experts in dentistry, dental technology and dental education in the Netherlands. Dentists' acceptance and use of digital technologies are to varying degrees driven by the perceived advantages over analogue methods, perceived influence on treatment quality, dentists' personal and professional orientation, and social influence from peers and external groups. These effects are complemented by personal and dental-practice characteristics. The findings suggest that there are large differences in motivation to adopt and use digital technologies between early adopters, late adopters and non-adopters, which should be examined in greater detail. We recommend that educators, dentists, and representatives of the dental industry who deal with the diffusion of these technologies take account of dentists' widely different attitudes to digitalisation.
Kashapov, R. N.; Korobkina, A. I.; Platonov, E. V.; Saleeva, G. T.
The article is devoted to the topic of creating new methods of dental prosthesis. The aim of this work is to investigate the possibility of using additive technology to create nylon prosthesis. As a result of experimental studies, was made a sample of nylon partially removable prosthesis using 3D printing has allowed to simplify, accelerate and reduce the coat of manufacturing high-precision nylon dentures.
Amaechi, Bennett T.
It is now universally recognized that the development of new technologies for early detection and quantitative monitoring of dental decay at an early stage of formation could provide health and economic benefits ranging from timely preventive interventions to reduction in the time required for clinical trials of anticaries agents. The use of technologies as adjunct to clinical visual examination for caries diagnosis will facilitate preventive care in dentistry to lower treatment cost as well as reduce the cost and time for testing potential anticaries agents. This article describes the various technologies available to aid the dental practitioners in detecting dental caries at the earliest stage of its formation, assessing the activities of the detected carious lesion, and quantitatively or qualitatively monitoring of the lesion over time. The need and the importance of these technologies were also discussed. The data discussed are primarily based on published scientific studies and reviews from case reports, clinical trials, and in vitro and in vivo studies. References have been traced manually by MEDLINE® or through manufacturer's websites. While some of the devices are fully developed and commercially available, others are still under development. The devices vary in their modes of action as well as their capability as caries diagnostic aids. It is clear that the differences in caries presentations and behavior in different anatomical sites make it unlikely that any one diagnostic modality will have adequate sensitivity and specificity of detection of carious lesions for all sites; a combination of diagnostic tools will help us diagnose lesions earlier and detect failing restorations sooner, all to avoid more costly, destructive dental procedures and truly take dentistry into the preventive rather than the reactive mode.
Cox, S; Pollock, D; Rountree, J; Murray, C M
Although international studies have shown an increasing use of information and communication technology (ICT) amongst dental students, there are no published studies specific to New Zealand (NZ). The aim of this research was to identify device ownership and academic utilisation patterns amongst New Zealand dental students, including preferences and perceptions, and barriers to use. All currently enrolled dental students (322) were invited to complete a 15-item questionnaire. Data were statistically analysed in SPSS version 20.0. Qualitative data were analysed using a general inductive technique. The participation rate was 78.6% (N = 253 of 322). The majority of respondents personally owned laptop computers (98%) and smartphones (80.2%). A total of 10.8% of participants used a desktop computer everyday for academic purposes, whilst 78.7% used a laptop computer daily, and 54.7% a smartphone. New Zealand dental students demonstrated a high usage of ICT for their coursework with varied use of different online resources. The most frequently used online resources were search engines, social networking sites and lecture slides provided on Blackboard(®) . A high perceived value was placed on both audio podcasts and video podcasts despite the high value also placed on the traditional lectures. Although most participants (84.5%) felt that their ICT knowledge was adequate to meet academic requirements, a small number (1.6%) did not agree. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Gileva, O. S.; Libik, T. V.; Chuprakov, M. A.; Yakov, A. Y.; Mirsaeva, F. Z.
Oral mucositis (OM) is the severe inflammation, lesioning and ulceration of the epithelia, accompanied by bleeding and intensive pain. OM is a common complication of dental implantation. Low-level laser therapy (LLLT) has been found to enhance the repair and healing of epithelia. The aim of this study was to evaluate the effectiveness of preventive and treatment use of LLLT (B-Cure Laser Dental Pro technology in original author's techniques) in the patients who have undergone dental implantation. Simple blind randomized prospective one-center comparative placebo-controlled clinical trial is carried out on the group of 30 partially edentulous patients. It is proved that the use of LLLT before and after installation of dental implants provides: 1) reliable reduction (by 3.5 times) of the frequency of implication and intensity of pain in the first days after operation; 2) reduction (by 3.3-3.7 times) of frequency, duration and intensity of local edematous and inflammatory processes in peri-implant zone and facial soft tissue edema; 3) effective prophylaxis of postoperative sensory, paresthesia and neurologic disturbances in maxillofacial area.
Full Text Available Objective: To assess the importance of using the new system Quick Sleeper for local anesthesia, to highlight benefits of quick and comfortable anesthesia. Material and Methods. The examination of effectiveness, convenience of this kind of anesthesia has been carried out. Results. All patients, taking part in this examination, confirmed more comfortable condition after this anesthesia than conductor and infiltration methods of anesthesia. The effect of anesthesia is better than after conductor anesthesia. Conclusion. This technology guarantees equal introduction and spread of anesthetic, independently of tissue density, eliminating the risk of carpule breakage.
Lin, Zeming; He, Bingwei; Chen, Jiang; D u, Zhibin; Zheng, Jingyi; Li, Yanqin
To guide doctors in precisely positioning surgical operation, a new production method of minimally invasive implant guide template was presented. The mandible of patient was scanned by CT scanner, and three-dimensional jaw bone model was constructed based on CT images data The professional dental implant software Simplant was used to simulate the plant based on the three-dimensional CT model to determine the location and depth of implants. In the same time, the dental plaster models were scanned by stereo vision system to build the oral mucosa model. Next, curvature registration technology was used to fuse the oral mucosa model and the CT model, then the designed position of implant in the oral mucosa could be determined. The minimally invasive implant guide template was designed in 3-Matic software according to the design position of implant and the oral mucosa model. Finally, the template was produced by rapid prototyping. The three-dimensional registration technology was useful to fuse the CT data and the dental plaster data, and the template was accurate that could provide the doctors a guidance in the actual planting without cut-off mucosa. The guide template which fabricated by comprehensive utilization of three-dimensional registration, Simplant simulation and rapid prototyping positioning are accurate and can achieve the minimally invasive and accuracy implant surgery, this technique is worthy of clinical use.
Evans, J; Henderson, A J; Sun, J; Haugen, H; Myhrer, T; Maryan, C; Ivanow, K N; Cameron, A; Johnson, N W
The ability to function as an effective member of a dental care team is a highly desirable--frequently mandated--attribute of dental technology (DT) graduates. Currently, there is little rigorous examination of how the learning of team-working skills might best be structured in a DT curriculum. This research compares DT curricula, and students' attitudes and perceptions regarding collaboration in practice, from four countries. Students (n=376) were invited to complete an education profile questionnaire, and the standardised measure--the shared learning scale. There were 196 (52%) responses. Students given opportunities to engage with others had better perceptions of inter-professional learning (IPL). Most believed that team-work and collaborative skills were best acquired by learning together with other dental care professionals, preferably sharing cases for real patients. Curricula should maximise opportunities for dental technology students to experience authentic IPL. Collaboration and team-work needs to be embedded through the whole undergraduate programme.
Evans, J; Henderson, A; Johnson, N
Teamwork is essential for the provision of contemporary, high quality oral health care. Teamwork skills need to be taught and learnt and therefore ought to be one of the core competencies in all dental education programmes: dentistry, oral health therapy, dental technology and dental assisting. Currently, lack of opportunities for collaborative learning and practice within educational establishments, and in the practising professions, hamper the development of effective teamwork. For students across oral health care, learning 'together' requires positive action for teamwork skills to be developed. Interprofessional curricula need to be formally developed, based on evidence from the wider education literature that demonstrates how to maximise the engagements needed for teamwork in practice. Rigorous study of interprofessional education within dentistry and oral health is in its infancy. Anecdotal evidence indicates that dental technology students who experience an interprofessional curriculum are better prepared for collaborative practice. Formalised interprofessional education is posited as an effective strategy to improve interactions among oral health professionals leading to improved patient care. This paper reviews the extant literature and describes the approach currently being trialled at Griffith University.
Reddington, Amanda R; Egli, Amy J; Schmuck, Heather M
Health professions students are often unaware of other health care providers' roles or professional expertise due to most education taking place within their single profession. This pattern may be even more prevalent for baccalaureate and associate degree programs since most interprofessional education (IPE) occurs in predoctoral programs and, when IPE is incorporated into allied health professions education, it often utilizes simulation instead of live patient experiences. The aim of this study was to determine if radiologic technology and dental assisting students' perceptions changed regarding interprofessional practice and teamwork after an IPE activity with actual patients. The participants were students in the University of Southern Indiana (USI) radiologic technology and dental assisting programs. This mixed-methods pilot study conducted in 2017 collected quantitative and qualitative data from pre and post surveys, the researchers' observations of student interactions during live patient assessment and acquisition of panoramic images, and large-group discussion. Twenty-five of the 26 students who participated in the IPE program completed both pre and post surveys, for a 96% response rate. The results showed significant differences in the participants' perceptions from the pre to post surveys on a wide variety of survey items. Most notable were the positive changes in perceptions related to trust in judgment of others within their profession (p=0.001), relationships with other professions (p=0.002), and thinking highly of other professions (p=0.002). Overall, this study found that incorporating the IPE activity with a live patient into these radiologic technology and dental assisting programs improved the students' perceptions of other allied health professionals. Future research should include more participants to increase sample size and add quantitative data collection.
Buchanan, Judith A
This article reports on extensive experience with advanced simulation at the University of Pennsylvania, School of Dental Medicine (UPSDM). Virtual reality-based technology (VRBT) or advanced simulation is currently available for the instruction of dental students in preclinical restorative procedures. UPSDM was one of the first schools in the world to have extensive experience with VRBT technology using an advanced simulation unit (DentSim) from DenX, Ltd. UPSDM's experience consists of several years of research using control and experimental groups, employing students to participate in an investigative project, and using the units for remediation and a supplement to the preclinical laboratory. Currently, all first-year students (Class of 2007 and Class of 2008) are receiving most of their preparative operative training on the VRBT units. UPSDM started with one (beta) version unit in 1998, which was later updated and expanded first to four units and recently to fifteen units. This communication is presenting the studies that were of fundamental importance in making the decision to acquire fifteen units in 2003. The areas of main interest to the SDM concerning this technology were its use in teaching, refreshing, and remediating students in restorative procedures and its effectiveness as a teaching methodology in relation to time, efficiency, and faculty. Several studies with varying parameters were performed at various time points. The limited statistical analysis conducted was not conclusive for all measures, and in some cases the data only suggest areas of possible significance. This is due to the low number of students who could access the limited number of available units and the change of protocols in response to student and faculty input. Overall, the results do suggest, however, that students learn faster, arrive at the same level of performance, accomplish more practice procedures per hour, and request more evaluations per procedure or per hour than in our
Rajab, Lamis D; Baqain, Zaid H
The aim of this study was to investigate the current knowledge, skills, and opinions of undergraduate dental students at the University of Jordan with respect to information communication technology (ICT). Dental students from the second, third, fourth, and fifth years were asked to complete a questionnaire presented in a lecture at the end of the second semester in the 2002-03 academic year. The response rate was 81 percent. Besides free and unlimited access to computers at the school of dentistry, 74 percent of the students had access to computers at home. However, 44 percent did not use a computer regularly. Male students were more regular and longer users of computers than females (pstudents (70 percent) judged themselves competent in information technology (IT) skills. More males felt competent in basic IT skills than did females (pstudents felt competent in word-processing skills (pstudents. More males used word processing for their studies than females (pStudents used computers for personal activities more frequently than for academic reasons. More males used computers for both academic (pstudents had access to the Internet at the university, and 54 percent had access at home. A high percentage of students (94 percent) indicated they were comfortable using the Internet, 75 percent said they were confident in the accuracy, and 80 percent said they were confident in the relevance of information obtained from the Internet. Most students (90 percent) used email. Most students (83 percent) supported the idea of placing lectures on the web, and 61.2 percent indicated that this would not influence lecture attendance. Students used the Internet more for personal reasons than for the study of dentistry. More clinical students used the Internet for dentistry than preclinical students (pstudents at the University of Jordan have access to substantial IT resources and demonstrated attitudes toward the computer and Internet technology and use that were similar to other
Jathanna, Vinod R; Jathanna, Ramya V; Jathanna, Roopalekha
Many obstacles need to be overcome if digital and electronic technologies are to be fully integrated in the operation of dental clinics in some countries. These obstacles may be physical, technical, or psychosocial barriers in the form of perceptions and attitudes related to software incompatibilities, patient privacy, and interference with the patient-practitioner relationship. The objectives of the study are to assess the perceptions of Indian dental students of one school toward the usefulness of digital technologies in improving dental practice; their willingness to use digital and electronic technologies; the perceived obstacles to the use of digital and electronic technologies in dental care setups; and their attitudes toward Internet privacy issues. The study population consisted of 186 final year undergraduate dental students from the A. B. Shetty Memorial institute of Dental Sciences, Rajiv Gandhi University of Health Sciences, Mangalore, India. Survey data were analyzed descriptively . Most students indicated that information technology enhances patient satisfaction, the quality of dental record, diagnosis, treatment planning, and doctor-doctor communication. Cost of equipment and need for technical training were regarded as major obstacles by substantial proportions of respondents. Most dental students at our school feel that the information technology will support their decision making in diagnoses and devising effective treatment plans, which in turn increase patient satisfaction and quality of care. Students also perceived that lack of technical knowledge and the high cost of implementation are major barriers to developing information technology in India.
Full Text Available The potential application of stem cell biology in human dentistry is a new and emerging field of research. The objective of the current review was to study the efficiency of mesenchymal stem cells (MSCs in sinus lift augmentation (SLA. A literature review was performed in PubMed Central using MeSH keywords such as sinus lift, MSCs, dental implants, and augmentation. The searches involved full-text papers written in English, published in the past 10 years (2007–2017. The review included in vitro and in vivo studies on the use of MSCs in SLA. Electronic searching provided 45 titles, and among them, 8 papers were chosen as suitable based on the inclusion requirements of this review. The reviewed studies have revealed the potential of MSCs in SLA. According to these papers, stem cell therapy combined with different biomaterials may considerably improve bone regeneration in previous steps of dental implantation and may veritably lead to efficient clinical usages in the recent future. However, the identification of an ideal source of stem cells as well as long-term studies is vital to assess the success rate of this technology. Further clinical trials are also needed to approve the potential of MSCs in SLA.
Grünheid, Thorsten; Patel, Nishant; De Felippe, Nanci L; Wey, Andrew; Gaillard, Philippe R; Larson, Brent E
Historically, orthodontists have taken dental measurements on plaster models. Technological advances now allow orthodontists to take these measurements on digital models. In this study, we aimed to assess the accuracy, reproducibility, and time efficiency of dental measurements taken on 3 types of digital models. emodels (GeoDigm, Falcon Heights, Minn), SureSmile models (OraMetrix, Richardson, Tex), and AnatoModels (Anatomage, San Jose, Calif) were made for 30 patients. Mesiodistal tooth-width measurements taken on these digital models were timed and compared with those on the corresponding plaster models, which were used as the gold standard. Accuracy and reproducibility were assessed using the Bland-Altman method. Differences in time efficiency were tested for statistical significance with 1-way analysis of variance. Measurements on SureSmile models were the most accurate, followed by those on emodels and AnatoModels. Measurements taken on SureSmile models were also the most reproducible. Measurements taken on SureSmile models and emodels were significantly faster than those taken on AnatoModels and plaster models. Tooth-width measurements on digital models can be as accurate as, and might be more reproducible and significantly faster than, those taken on plaster models. Of the models studied, the SureSmile models provided the best combination of accuracy, reproducibility, and time efficiency of measurement. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.
Ritzberger, Christian; Apel, Elke; Höland, Wolfram; Peschke, Arnd; Rheinberger, Volker M.
The main properties (mechanical, thermal and chemical) and clinical application for dental restoration are demonstrated for three types of glass-ceramics and sintered polycrystalline ceramic produced by Ivoclar Vivadent AG. Two types of glass-ceramics are derived from the leucite-type and the lithium disilicate-type. The third type of dental materials represents a ZrO2 ceramic. CAD/CAM technology is a procedure to manufacture dental ceramic restoration. Leucite-type glass-ceramics demonstrate high translucency, preferable optical/mechanical properties and an application as dental inlays, onlays and crowns. Based on an improvement of the mechanical parameters, specially the strength and toughness, the lithium disilicate glass-ceramics are used as crowns; applying a procedure to machine an intermediate product and producing the final glass-ceramic by an additional heat treatment. Small dental bridges of lithium disilicate glass-ceramic were fabricated using a molding technology. ZrO2 ceramics show high toughness and strength and were veneered with fluoroapatite glass-ceramic. Machining is possible with a porous intermediate product.
Bergholm, Åsa; Östberg, Anna-Lena; Gabre, Pia
The aim of this study was to obtain an understanding of the factors that affected the way new technology and methods were used in dentistry after a training program. A qualitative research method was used to collect data. Nine dentists working in the Public Dental Service (PDS) in Uppsala County in Sweden agreed to be interviewed in the study. They worked in five different clinics, all with laser equipment, and had received training in the use of lasers. The interviews were tape recorded and transcribed, and were analysed using manifest and latent qualitative content analysis. The categories in this study were identified as "Prerequisites and obstacles to imple- mentation", "Attitudes to laser technology and treatments" and "Laser technology in the future'". The dentists described working with lasers as complicated and problematic. They had concerns about the method relating to the working environment, evidence of efficacy of treatment, costs, and benefits for patients and dentists. The main finding was that the decision to adopt the technology seemed to be based on individual perceptions of the value of lasers compared to other ways of achieving the same goal. They provided uniform proposals regarding how an organization should implement new methods, including an emphasis on the importance of preparation and having opportunities to be able to test and evaluate the technology. Another important factor was support from surrounding staff, colleagues and management. Despite all the barriers, the respondents were positive about working with lasers in the future, mainly due to their belief that patients would demand laser treatment. In conclusion both individual and organizational factors affected the extent to which the respondents used the laser. The main finding was the individual perception of the value of lasers compared to other methods which could achieve the same goal.
Cui, J-J; Peng, B; Lin, W
The aim of this study is to analyze the effects of combining cone beam computed tomography (CBCT) technology with visual root canal recurrence in the treatment of elderly patients with dental pulp disease. 56 cases of elderly patients with dental pulp disease were contiguously selected, and randomly divided into the control group (70 teeth from 27 patients) and the observation group (77 teeth from the rest 29 patients). We adopted CBCT technology combined with conventional root canal therapy in control group and CBCT technology combined with visual root canal recurrence in observation group to compare the clinical effects. It was found that there was no statistical difference in duration of operation between the two groups (p>0.05). The operation times and the VAS during and after operation of the observation group were significantly less than that of the control group (ppulp disease.
Gadbury-Amyot, Cynthia C; Purk, John H; Williams, Brian Joseph; Van Ness, Christopher J
The purpose of this pilot study was to examine if tablet technology with accompanying instructional videos enhanced the teaching and learning outcomes in a preclinical dental laboratory setting. Two procedures deemed most challenging in Operative Dentistry II were chosen for the development of instructional videos. A random sample of thirty students was chosen to participate in the pilot. Comparison of faculty evaluations of the procedures between the experimental (tablet) and control (no tablet) groups resulted in no significant differences; however, there was a trend toward fewer failures in the experimental group. Examination of the ability to accurately self-assess was compared by exploring correlations between faculty and student evaluations. While correlations were stronger in the experimental group, the control group had significant correlations for all three procedures, while the experimental group had significant correlations on only two of the procedures. Students strongly perceived that the tablets and videos helped them perform better and more accurately self-assess their work products. Students did not support requiring that they purchase/obtain a specific brand of technology. As a result of this pilot study, further development of ideal and non-ideal videos are in progress, and the school will be implementing a "Bring Your Own Device" policy with incoming students.
Hill, Heather K; Stewart, Denice C L; Ash, Joan S
The purpose of this study was to increase our understanding of the impact of Health Information Technology Systems (HITS) on dental school users when the systems are integrated into chair-side patient care. We used qualitative research methods, including interviews, focus groups, and observations, to capture the experiences of HITS users at a single institution. Users included administrators, clinical faculty members, predoctoral students, support staff, and residents. The data were analyzed using a grounded theory approach, and nine themes emerged: 1) HITS benefits were disproportionate among users; 2) communicating about the HITS was challenging; 3) users experienced a range of strong emotions; 4) the instructor persona diminished; 5) there were shifts in the school's power structure; 6) allocation of end-users' time shifted; 7) the training and support needs of end-users were significant; 8) perceived lack of HITS usability made documentation cumbersome for clinicians; and 9) clinicians' workflow was disrupted. HITS integration into patient care impacts the work of all system users, especially end-users. The themes highlight areas of potential concern for implementers and users in integrating a HITS into patient care.
Chen, Jianyu; Zhang, Zhiguang; Chen, Xianshuai; Zhang, Chunyu; Zhang, Gong; Xu, Zhewu
Recently a new therapeutic concept of patient-specific implant dentistry has been advanced based on computer-aided design/computer-aided manufacturing technology. However, a comprehensive study of the design and 3-dimensional (3D) printing of the customized implants, their mechanical properties, and their biomechanical behavior is lacking. The purpose of this study was to evaluate the mechanical and biomechanical performance of a novel custom-made dental implant fabricated by the selective laser melting technique with simulation and in vitro experimental studies. Two types of customized implants were designed by using reverse engineering: a root-analog implant and a root-analog threaded implant. The titanium implants were printed layer by layer with the selective laser melting technique. The relative density, surface roughness, tensile properties, bend strength, and dimensional accuracy of the specimens were evaluated. Nonlinear and linear finite element analysis and experimental studies were used to investigate the stress distribution, micromotion, and primary stability of the implants. Selective laser melting 3D printing technology was able to reproduce the customized implant designs and produce high density and strength and adequate dimensional accuracy. Better stress distribution and lower maximum micromotions were observed for the root-analog threaded implant model than for the root-analog implant model. In the experimental tests, the implant stability quotient and pull-out strength of the 2 types of implants indicated that better primary stability can be obtained with a root-analog threaded implant design. Selective laser melting proved to be an efficient means of printing fully dense customized implants with high strength and sufficient dimensional accuracy. Adding the threaded characteristic to the customized root-analog threaded implant design maintained the approximate geometry of the natural root and exhibited better stress distribution and
Ahmad, Maha; Sleiman, Naama H; Thomas, Maureen; Kashani, Nahid; Ditmyer, Marcia M
Laboratory cadaver dissection is essential for three-dimensional understanding of anatomical structures and variability, but there are many challenges to teaching gross anatomy in medical and dental schools, including a lack of available space and qualified anatomy faculty. The aim of this study was to determine the efficacy of high-definition audiovisual educational technology in the gross anatomy laboratory in improving dental students' learning outcomes and satisfaction. Exam scores were compared for two classes of first-year students at one U.S. dental school: 2012-13 (no audiovisual technology) and 2013-14 (audiovisual technology), and section exams were used to compare differences between semesters. Additionally, an online survey was used to assess the satisfaction of students who used the technology. All 284 first-year students in the two years (2012-13 N=144; 2013-14 N=140) participated in the exams. Of the 140 students in the 2013-14 class, 63 completed the survey (45% response rate). The results showed that those students who used the technology had higher scores on the laboratory exams than those who did not use it, and students in the winter semester scored higher (90.17±0.56) than in the fall semester (82.10±0.68). More than 87% of those surveyed strongly agreed or agreed that the audiovisual devices represented anatomical structures clearly in the gross anatomy laboratory. These students reported an improved experience in learning and understanding anatomical structures, found the laboratory to be less overwhelming, and said they were better able to follow dissection instructions and understand details of anatomical structures with the new technology. Based on these results, the study concluded that the ability to provide the students a clear view of anatomical structures and high-quality imaging had improved their learning experience.
Nelson, Neha; K S, Jyothi; Sunny, Kiran
The margins of copings for crowns and retainers of fixed partial dentures affect the progress of microleakage and dental caries. Failures occur due to altered fit which is also influenced by the method of fabrication. An in-vitro study was conducted to determine among the cast base metal, copy milled zirconia, computer aided designing computer aided machining/manufacturing zirconia and direct metal laser sintered copings which showed best marginal accuracy and internal fit. Forty extracted maxillary premolars were mounted on an acrylic model and reduced occlusally using a milling machine up to a final tooth height of 4 mm from the cementoenamel junction. Axial reduction was accomplished on a surveyor and a chamfer finish line was given. The impressions and dies were made for fabrication of copings which were luted on the prepared teeth under standardized loading, embedded in self-cure acrylic resin, sectioned and observed using scanning electron microscope for internal gap and marginal accuracy. The copings fabricated using direct metal laser sintering technique exhibited best marginal accuracy and internal fit. Comparison of mean between the four groups by ANOVA and post-hoc Tukey HSD tests showed a statistically significant difference between all the groups (p⟨0.05). It was concluded that the copings fabricated using direct metal laser sintering technique exhibited best marginal accuracy and internal fit. Additive digital technologies such as direct metal laser sintering could be cost-effective for the clinician, minimize failures related to fit and increase longevity of teeth and prostheses. Copyright© 2017 Dennis Barber Ltd.
... Products and Medical Procedures Dental Devices Dental Amalgam Dental Amalgam Share Tweet Linkedin Pin it More sharing options Linkedin Pin it Email Print Dental amalgam is a dental filling material which is ...
Gratton, David G; Kwon, So Ran; Blanchette, Derek; Aquilino, Steven A
The aim of this study was to evaluate the effect of digital tooth preparation imaging and evaluation technology on dental students' technical abilities, self-evaluation skills, and the assessment of their simulated clinical work. A total of 80 second-year students at one U.S. dental school were assigned to one of three groups: control (n=40), E4D Compare (n=20), and Sirona prepCheck (n=20). Students in the control group were taught by traditional teaching methodologies, and the technology-assisted groups received both traditional training and supplementary feedback from the corresponding digital system. Three outcomes were measured: faculty technical score, self-evaluation score, and E4D Compare scores at 0.30 mm tolerance. Correlations were determined between the groups' scores from visual assessment and self-evaluation and between the visual assessment and digital scores. The results showed that the visual assessment and self-evaluation scores did not differ among groups (p>0.05). Overall, correlations between visual and digital assessment scores were modest though statistically significant (5% level of significance). These results suggest that the use of digital tooth preparation evaluation technology did not impact the students' prosthodontic technical and self-evaluation skills. Visual scores given by faculty and digital assessment scores correlated moderately in only two instances.
The purpose of this survey research was to determine the diffusion of digital radiography, the electronic oral health record (EOHR), digital intraoral photography, and diagnosis and clinical decision-making support software into the dental offices of Nevada. A cross-sectional survey design was utilized with a random sample of 600 Nevada dentists.…
dental fear adequately and continued to be reduced even after a year at a private dentist of the patients' choosing. Conclusion: The phenomenon of dental fear illustrates that new technological developments in dentistry must be accompanied by improved social and psychological understanding in the future......Inspite of technological development in dentistry, historically there has always been a new set of instruments or procedures to provide people with symbols of fear (Figs. 2 and 3). The dental consequences of treatment avoidance due to fear are often dramatic (Fig. 4). Diagnosis of the problem....... Rod's Notes: 9 Feb 2005: The thoughts in this article are found throughout the doktor afhandling text and especially about dentists working with patient expectations about technology is as true today 12 years after as at that time. Perhaps the article can be reshaped for the meetings with the Danish...
Grigg, P; Macfarlane, T V; Shearer, A C; Jepson, N J; Stephens, C D
To identify computer facilities available in 3 dental schools where 3 different approaches to the use of technology-based learning material have been adopted and assess dental students' perception of their own computer skills and their attitudes towards information technology. Multicentre cross sectional by questionnaire. All 181 dental students in their final year of study (1997-8). The overall participation rate was 80%. There were no differences between schools in the students' self assessment of their IT skills but only 1/3 regarded themselves as competent in basic skills and nearly 50% of students in all 3 schools felt that insufficient IT training had been provided to enable them to follow their course without difficulty. There were significant differences between schools in most of the other areas examined which reflect the different ways in which IT can be used to support the dental course. 1. Students value IT as an educational tool. 2. Their awareness of the relevance of a knowledge of information technology for their future careers remains generally low. 3. There is a need to provide effective instruction in IT skills for those dental students who do not acquire these during secondary education.
Marti, A M; Harris, B T; Metz, M J; Morton, D; Scarfe, W C; Metz, C J; Lin, W-S
With increasing use of digital scanning with restorative procedures in the dental office, it becomes necessary that educational institutions adopt instructional methodology for introducing this technology together with conventional impression techniques. To compare the time differences between instructing dental students on digital scanning (DS) (LAVA C.O.S. digital impression system) and a conventional impression technique (CI) (polyvinyl siloxane), and to compare students' attitudes and beliefs towards both techniques. Volunteer sophomore dental students (n = 25) with no prior experience in clinical impressions were recruited and IRB consent obtained. Participants responded to a pre-and post-exposure questionnaire. Participants were instructed on the use of both DS and CI for a single tooth full coverage crown restoration using a consecutive sequence of video lecture, investigator-led demonstration and independent impression exercise. The time necessary for each step (minutes) was recorded. Statistical significance was calculated using dependent t-tests (time measurements) and 2-sample Mann-Whitney (questionnaire responses). The time spent teaching students was greater for DS than CI for video lecture (15.95 and 10.07 min, P = 0.0000), demonstration time (9.06 and 4.70 min, P = 0.0000) and impression time (18.17 and 8.59 min, P = 0.0000). Prior to the instruction and practice, students considered themselves more familiar with CI (3.96) than DS (1.96) (P = 0.0000). After the instruction and practice, participants reported CI technique proved significantly easier than expected (pre-instruction: 3.52 and post-instruction: 4.08, P = 0.002). However, overall participants' perception of ease of use for DS was not influenced by this instruction and practice experience (pre-instruction: 3.84 and post-instruction: 3.56, P = 0.106). Despite the results, 96% of participants expressed an expectation that DS will become their predominant impression technique during their
Hill, Heather K; Stewart, Denice C L; Ash, Joan S
Health Information Technology Systems (HITS) are becoming more widely integrated into patient care in the dental school setting. The purpose of this study was to evaluate the impact of a chairside HITS on users in the dental school setting. Qualitative techniques, including interviews, focus groups and observations, were used. Using grounded theory, we saw 9 themes emerge. One theme of particular interest was that "training and support needs of end-users were significant." This paper explores this theme in detail and discusses the implications.
Callan, Richard S; Palladino, Christie L; Furness, Alan R; Bundy, Emily L; Ange, Brittany L
Recent efforts have been directed towards utilizing CAD/CAM technology in the education of future dentists. The purpose of this pilot study was to investigate the feasibility of implementing CAD/CAM technology in instruction on preparing a tooth for restoration. Students at one dental school were assigned access to CAD/CAM technology vs. traditional preparation methods in a randomized, crossover design. In a convenience sample of a second-year class, seventy-six of the seventy-nine students volunteered to participate, for a response rate of 96 percent. Two analyses were performed on this pilot data: a primary effectiveness analysis comparing students' competency exam scores by intervention group (intention-to-treat analysis) and a secondary efficacy analysis comparing competency exam scores among students who reported using CAD/CAM versus those who did not. The effectiveness analysis showed no difference in outcomes by intervention group assignment. While student survey results indicated interest in utilizing the technology, the actual utilization rate was much less than one might anticipate, yielding a sample size that limited statistical power. The secondary analysis demonstrated higher mean competency exam scores for students reporting use of CAD/CAM compared to those who did not use the technology, but these results did not reach statistical significance (p=0.075). Prior research has investigated the efficacy of CAD/CAM in a controlled educational trial, but this study adds to the literature by investigating student use of CAD/CAM in a real-world, self-study fashion. Further studies should investigate ways in which to increase student utilization of CAD/CAM and whether or not increased utilization, with a larger sample size, would yield significant outcomes.
Hanson, Kami; Alexander, Susan
The role of reflection in the learning process is essential to drive a meaningful experience for the student. Educators have recognized this concept and continue to research the impact of reflection on learning. The purpose of this research project was to investigate the level of reflection that takes place when students use two different types of media for reflective journaling: hard copy vs. electronic. Journal data, both hard copy and electronic, were gathered from groups of university dental hygiene students. As part of regular course requirements, students were assigned to maintain a reflective journal regarding their clinical experiences. Written data were evaluated using a rubric and coding scheme to determine the levels of reflective thinking evidenced in student journals for both media. Researchers applied qualitative methods to analyze the textual content and/or discourse using a constant comparative, "counting and coding" approach. Results were analyzed and presented as comparisons of descriptive statistics between student group and with qualitative discourse. The evidence suggests that the electronic format of journaling influenced the students' ability to engage in reflective thinking and action, as well as develop higher levels of critical thinking skills.
Since establishment of formal dental education in Southeast Asia, changes stemming from research and technology have led to dental curriculum changes. Development of the dental curriculum can be divided into three phases: disease oriented; health oriented; and community oriented. Evolution of these phases is traced in the dental curricula of Laos,…
Feeney, L; Reynolds, P A; Eaton, K A; Harper, J
Information and communications technology (ICT) is a universal term describing the use of technology and media to disseminate and share knowledge and information. Educational media provide a means by which information can be communicated between teacher and learner. In this context, the aim of this digest is to summarise and describe the spectrum of tools available. All technologies used in education have their strengths and weaknesses. Variety needs to be balanced by economy. However, it must be remembered that technology is not the overriding issue. The design of the learning environment and the learning experience itself are far more important. Technologies are generally flexible and can be used in a variety of ways. Knowledge of these technologies will help guide appropriate selection. The following tools are described: 1. Telecommunications services; 2. Communications tools (social software) including email, newsgroups, weblogs and wikis; 3. Richmedia in interactive training and learning; 4. Compact discs (CDs) and digital video discs (DVDs); 5. Virtual learning environments (VLE); 6. Sophisticated communications - videoconferencing, webcasting and podcasts; 7. Interactive television; and 8. Virtual reality.
Alharbi, N.; Osman, R.B.; Wismeijer, D.
Purpose: The aim of the present study was to evaluate the effect of the build angle and the support configuration (thick versus thin support) on the dimensional accuracy of 3D-printed full-coverage dental restorations. Materials and Methods: A full-coverage dental crown was digitally designed and
Braemer, W. [Heraeus Kulzer GmbH and Co. KG, Hanau (Germany)
Modern dental alloys have been used for 50 years to produce prosthetic dental restorations. Generally, the crowns and frames of a prosthesis are prepared in dental alloys, and then veneered by feldspar ceramics or composites. In use, the alloys are exposed to the corrosive influence of saliva and bacteria. Metallic dental materials can be classified as precious and non-precious alloys. Precious alloys consist of gold, platinum, and small amounts of non-precious components such as copper, tin, or zinc. The non-precious alloys are based on either nickel or cobalt, alloyed with chrome, molybdenum, manganese, etc. Titanium is used as Grade 2 quality for dental purposes. As well as the dental casting alloys, high purity electroplated gold (99.8 wt.-%) is used in dental technology. This review discusses the corrosion behavior of metallic dental materials with saliva in ''in vitro'' tests and the influence of alloy components on bacteria (Lactobacillus casei and Streptococcus mutans). The test results show that alloys with high gold content, cobalt-based alloys, titanium, and electroplated gold are suitable for use as dental materials. (orig.)
Li, Raymond Wai Kim; Chow, Tak Wah; Matinlinna, Jukka Pekka
Ceramics are widely used as indirect restorative materials in dentistry because of their high biocompatibility and pleasing aesthetics. The objective is to review the state of the arts of CAD/CAM all-ceramic biomaterials. CAD/CAM all-ceramic biomaterials are highlighted and a subsequent literature search was conducted for the relevant subjects using PubMed followed by manual search. Developments in CAD/CAM technology have catalyzed researches in all-ceramic biomaterials and their applications. Feldspathic glass ceramic and glass infiltrated ceramic can be fabricated by traditional laboratory methods or CAD/CAM. The advent of polycrystalline ceramics is a direct result of CAD/CAM technology without which the fabrication would not have been possible. The clinical uses of these ceramics have met with variable clinical success. Multiple options are now available to the clinicians for the fabrication of aesthetic all ceramic restorations. Copyright © 2014 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.
Kim, Eun Kyung
Picture archiving and communication system (PACS) is an image information technology system for the transmission and storage of medical images. In Korea the first full PACS was installed at Samsung Medical Center in 1994, but, the rate of distribution was very slow. The government's approval for the medical insurance reimbursement for full PACS examinations in November 1999 became the turning point. Thereafter the number of hospitals with full PACS has steeply increased. In September of this year, PACS was installed at 906 medical institutes, including most of university hospitals and general hospitals. The first full dental PACS was installed at Wonkwang University Dental Hospital in 2002. Now ten out of eleven university dental hospitals implemented full dental PACS. The current status and technological factors of dental PACS in Korean university dental hospitals and the future perspectives of dental PACS are described.
Silva, Lidia Brión; Hodges, Kathleen O; Calley, Kristin Hamman; Seikel, John A
This pilot study compared the clinical endpoints of the magnetostrictive and piezoelectric ultrasonic instruments on calculus removal. The null hypothesis stated that there is no statistically significant difference in calculus removal between the 2 instruments. A quasi-experimental pre- and post-test design was used. Eighteen participants were included. The magnetostrictive and piezoelectric ultrasonic instruments were used in 2 assigned contra-lateral quadrants on each participant. A data collector, blind to treatment assignment, assessed the calculus on 6 predetermined tooth sites before and after ultrasonic instrumentation. Calculus size was evaluated using ordinal measurements on a 4 point scale (0, 1, 2, 3). Subjects were required to have size 2 or 3 calculus deposit on the 6 predetermined sites. One clinician instrumented the pre-assigned quadrants. A maximum time of 20 minutes of instrumentation was allowed with each technology. Immediately after instrumentation, the data collector then conducted the post-test calculus evaluation. The repeated analysis of variance (ANOVA) was used to analyze the pre- and post-test calculus data (p≤0.05). The null hypothesis was accepted indicating that there is no statistically significant difference in calculus removal when comparing technologies (p≤0.05). Therefore, under similar conditions, both technologies removed the same amount of calculus. This research design could be used as a foundation for continued research in this field. Future studies include implementing this study design with a larger sample size and/or modifying the study design to include multiple clinicians who are data collectors. Also, deposit removal with periodontal maintenance patients could be explored.
Austin, R. S.; Mullen, F.; Bartlett, D. W.
The application of surface topography measurement and characterization within dental materials science is highly active and rapidly developing, in line with many modern industries. Surface measurement and structuring is used extensively within oral and dental science to optimize the optical, tribological and biological performance of natural and biomimetic dental materials. Although there has historically been little standardization in the use and reporting of surface metrology instrumentation and software, the dental industry is beginning to adopt modern areal measurement and characterization techniques, especially as the dental industry is increasingly adopting digital impressioning techniques in order to leverage CAD/CAM technologies for the design and construction of dental restorations. As dental treatment becomes increasingly digitized and reliant on advanced technologies such as dental implants, wider adoption of standardized surface topography and characterization techniques will become evermore essential. The dental research community welcomes the advances that are being made in surface topography measurement science towards realizing this ultimate goal.
Schwei, Kelsey M; Cooper, Ryan; Mahnke, Andrea N; Ye, Zhan; Acharya, Amit
A workflow is defined as a predefined set of work steps and partial ordering of these steps in any environment to achieve the expected outcome. Few studies have investigated the workflow of providers in a dental office. It is important to understand the interaction of dental providers with the existing technologies at point of care to assess breakdown in the workflow which could contribute to better technology designs. The study objective was to assess electronic dental record (EDR) workflows using time and motion methodology in order to identify breakdowns and opportunities for process improvement. A time and motion methodology was used to study the human-computer interaction and workflow of dental providers with an EDR in four dental centers at a large healthcare organization. A data collection tool was developed to capture the workflow of dental providers and staff while they interacted with an EDR during initial, planned, and emergency patient visits, and at the front desk. Qualitative and quantitative analysis was conducted on the observational data. Breakdowns in workflow were identified while posting charges, viewing radiographs, e-prescribing, and interacting with patient scheduler. EDR interaction time was significantly different between dentists and dental assistants (6:20 min vs. 10:57 min, p = 0.013) and between dentists and dental hygienists (6:20 min vs. 9:36 min, p = 0.003). On average, a dentist spent far less time than dental assistants and dental hygienists in data recording within the EDR.
... and Medical Procedures Dental Devices Dental Amalgam About Dental Amalgam Fillings Share Tweet Linkedin Pin it More ... should I have my fillings removed? What is dental amalgam? Dental amalgam is a dental filling material ...
... this page: //medlineplus.gov/ency/patientinstructions/000779.htm Dental sealants To use the sharing features on this ... case a sealant needs to be replaced. How Dental Sealants are Applied Your dentist applies sealants on ...
Tay, C S
Medical and dental errors and negligence are again in the spotlight in recent news report. Dead because of doctor's bad handwriting Prescribing drug overdoses Germ-infested soap pumps--infections in hospitals This articles explains dental negligence including dental duty of care and the standard of care expected of dentists in relation to the Bolam principle.
Derksen, W.; Wismeijer, D.; Hanssen, S.; Tahmaseb, A.
The new technologies in the field of dental science have not only changed the way in which dentists run their practice but have also dramatically changed the procedures carried out in dental laboratories. Mechanical engineering, incorporated CMM, laser milling, 3D printing and 3D design in a
Koch, M; Eriksson, H G; Axelsson, S; Tegelberg, A
To survey the clinical endodontic protocols of general dental practitioners (GDPs) in public dental clinics and to assess the effect of an educational intervention on the adoption of a nickel-titanium (Ni-Ti) rotary system. General dental practitioners in a Swedish Intervention County (IC), underwent an educational programme in endodontics. A follow-up questionnaire was posted to 98 GDPs in the IC and to 97 GDPs in a Control County (CC), where no specific training had been provided. The questionnaire concerned demographics, clinical endodontic protocols and instrumentation techniques. The response rate to the questionnaire was 87%. More than 90% of all GDPs reported they always or generally used rubber dam, determined working length, used the canal irrigant 0.5% buffered NaOCl and calcium hydroxide as an interappointment dressing. Two of three GDPs reported, they generally or always informed the patient of the prognosis. Every second GDP reported routines for postoperative recall and follow-up. The Ni-Ti rotary technique was reported to be completely adopted by 77% of the GDPs in the IC, significantly higher than in the CC (6%), P educational programme in Ni-Ti rotary instrumentation reported they had successfully integrated the technique into daily clinical practice.
Fleming, Garry J P
The dental market is replete with new resorative materials marketed on the basis of novel technological advances in materials chemistry, bonding capability or reduced operator time and/or technique sensitivity. This paper aims to consider advances in current materials, with an emphasis on their role in supporting contemporary clinical practice.
Qi, Shengcai; Yan, Yanhong; Li, Rong; Hu, Jian
A variety of computer-based 3D applications are becoming regular tools for dental students for self-learning. This study investigated the learning effectiveness of junior dental students in passively versus actively controlling the 3D virtual scenes of implant dentistry. Participants were randomized into three groups and were exposed to three designs of educational materials: traditional 2D webpages (2D); active-controlling 3D webpages (A3); and passive-controlling 3D webpages (P3). After reviewing the webpages, the participants were asked to complete a posttest to assess the relative quality of information acquisition. Their responses were compared and analyzed. The results indicated that the P3 group received the highest score of 26.4±3.1 on the post-test, significantly better than the A3 group, which had the worst performance with a score of 20.3±4.0. The 2D group received a score of 24.2±4.6. There was a significant correlation between the scores on a mental rotations test and the subjects' performance on the posttest (p<0.001). A serious disadvantage of active control was indicated for individuals with low spatial ability. In 3D virtual reality assisted self-learning, passive control produces higher learning effects compared to active control. Too much active control may generate significantly negative impacts on students, especially for individuals with low spatial ability.
Figliuzzi, M; Mangano, F; Mangano, C
Direct laser metal forming (DLMF) is a new technique which allows solids with complex geometry to be produced by annealing metal powder microparticles in a focused laser beam, according to a computer-generated three-dimensional (3D) model. For dental implants, the fabrication process involves the laser-induced fusion of titanium microparticles, in order to build, layer by layer, the desired object. Modern computed tomography (CT) acquisition and 3D image conversion, combined with the DLMF process, allows the fabrication of custom-made, root-analogue implants (RAI), perfect copies of the radicular units that need replacing. This report demonstrates the successful clinical use of a custom-made, root-analogue DLMF implant. CT images of the residual non-restorable root of a right maxillary premolar were acquired and modified with specific software into a 3D model. From this model, a custom-made, root-analogue, DLMF implant was fabricated. Immediately after tooth extraction, the root-analogue implant was placed in the extraction socket and restored with a single crown. At the 1-year follow-up examination, the custom-made implant showed almost perfect functional and aesthetic integration. The possibility of fabricating custom-made, root-analogue DLMF implants opens new interesting perspectives for immediate placement of dental implants. Copyright © 2012 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.
Schwei, Kelsey M; Cooper, Ryan; Mahnke, Andrea N.; Ye, Zhan
Summary Background A workflow is defined as a predefined set of work steps and partial ordering of these steps in any environment to achieve the expected outcome. Few studies have investigated the workflow of providers in a dental office. It is important to understand the interaction of dental providers with the existing technologies at point of care to assess breakdown in the workflow which could contribute to better technology designs. Objective The study objective was to assess electronic dental record (EDR) workflows using time and motion methodology in order to identify breakdowns and opportunities for process improvement. Methods A time and motion methodology was used to study the human-computer interaction and workflow of dental providers with an EDR in four dental centers at a large healthcare organization. A data collection tool was developed to capture the workflow of dental providers and staff while they interacted with an EDR during initial, planned, and emergency patient visits, and at the front desk. Qualitative and quantitative analysis was conducted on the observational data. Results Breakdowns in workflow were identified while posting charges, viewing radiographs, e-prescribing, and interacting with patient scheduler. EDR interaction time was significantly different between dentists and dental assistants (6:20 min vs. 10:57 min, p = 0.013) and between dentists and dental hygienists (6:20 min vs. 9:36 min, p = 0.003). Conclusions On average, a dentist spent far less time than dental assistants and dental hygienists in data recording within the EDR. PMID:27437058
Ahearn, David J; Sanders, Martha J; Turcotte, Claudia
The increasing complexity of the dental office environment influences productivity and workflow for dental clinicians. Advances in technology, and with it the range of products needed to provide services, have led to sprawl in operatory setups and the potential for awkward postures for dental clinicians during the delivery of oral health services. Although ergonomics often addresses the prevention of musculoskeletal disorders for specific populations of workers, concepts of workflow and productivity are integral to improved practice in work environments. This article provides suggestions for improving workflow and productivity for dental clinicians. The article applies ergonomic principles to dental practice issues such as equipment and supply management, office design, and workflow management. Implications for improved ergonomic processes and future research are explored.
Massive Open Online Courses in Dental Education: Two Viewpoints: Viewpoint 1: Massive Open Online Courses Offer Transformative Technology for Dental Education and Viewpoint 2: Massive Open Online Courses Are Not Ready for Primetime.
Kearney, Rachel C; Premaraj, Sundaralingam; Smith, Becky M; Olson, Gregory W; Williamson, Anne E; Romanos, Georgios
This point/counterpoint article discusses the strengths and weaknesses of incorporating Massive Open Online Courses (MOOCs) into dental education, focusing on whether this relatively new educational modality could impact traditional dental curricula. Viewpoint 1 asserts that MOOCs can be useful in dental education because they offer an opportunity for students to learn through content and assessment that is delivered online. While specific research on MOOCs is limited, some evidence shows that online courses may produce similar learning outcomes to those in face-to-face courses. Given that MOOCs are intended to be open source, there could be opportunities for dental schools with faculty shortages and financial constraints to incorporate these courses into their curricula. In addition to saving money, dental schools could use MOOCs as revenue sources in areas such as continuing education. Viewpoint 2 argues that the hype over MOOCs is subsiding due in part to weaker than expected evidence about their value. Because direct contact between students, instructors, and patients is essential to the dental curriculum, MOOCs have yet to demonstrate their usefulness in replacing more than a subset of didactic courses. Additionally, learning professionalism, a key component of health professions education, is best supported by mentorship that provides significant interpersonal interaction. In spite of the potential of early MOOC ideology, MOOCs in their current form require either further development or altered expectations to significantly impact dental education.
Wilder-Smith, Petra; Otis, Linda; Zhang, Jun; Chen, Zhongping
This chapter describes the applications of OCT for imaging in vivo dental and oral tissue. The oral cavity is a diverse environment that includes oral mucosa, gingival tissues, teeth and their supporting structures. Because OCT can image both hard and soft tissues of the oral cavity at high resolution, it offers the unique capacity to identity dental disease before destructive changes have progressed. OCT images depict clinically important anatomical features such as the location of soft tissue attachments, morphological changes in gingival tissue, tooth decay, enamel thickness and decay, as well as the structural integrity of dental restorations. OCT imaging allows for earlier intervention than is possible with current diagnostic modalities.
Full Text Available This study prepared a basic framework for the development and improvement of Korean Dental Technicians' Licensing Examination, based on actual test questions. A peer review was conducted to ensure relevance to current practices in dental technology. For the statistical analysis, 1000 dental laboratory technicians were selected; specialists in dental laboratory technology (laboratory owners, educators, etc. were involved in creating valid and reliable questions. Results indicated that examination subjects should be divided into three categories: basic dental laboratory theory, dental laboratory specialties, and a practical examination. To ensure relevance to current practice, there should be less emphasis on basic dental laboratory theory, including health-related laws, and more emphasis on dental laboratory specialties. Introduction to dental anatomy should be separated from oral anatomy and tooth morphology; and fixed prosthodontics should be separated from crown and bridge technology and dental ceramics technology. Removable orthodontic appliance technology should be renamed 'orthodontic laboratory technology'. There should be less questions related to health related law, oral anatomy, dental hygiene, dental materials science and inlay, while the distribution ratio of questions related to tooth morphology should be maintained. There should be a decrease in the distribution ratio of questions related to crown and bridge technology, dental ceramics technology, complete dentures and removable partial dentures technology, and orthodontic laboratory technology. In the practical examination, the current multiple choice test should be replaced with tooth carving using wax or plaster. In dental laboratory specialties, subjects related to contemporary dental laboratory technology should be included in the test items.
Elhadi Mohieldin Awooda
Full Text Available Aim: This study is aimed to evaluate the confidence level of undergraduate final year dental students in performing root canal treatment (RCT and how it may affect their performance and perception regarding endodontics. Materials and Methods: A self-administered questionnaire was distributed to the final year dental students, at the University of Medical Sciences and Technology, Khartoum, Sudan (2013–2014. A total of 21 students were requested to participate voluntary and were asked to score their level of confidence using a 5-point Likert's scale. Results: Response rate was 100%, all the students (100% stated that the requirements set were enough, and 66.7% rated endodontic as average in terms of difficulty. When rating the mean of self-confidence for performing RCT in the dentition, maxillary teeth (2.43 ± 0.51 followed by mandibular teeth (2.71 ± 0.64 were higher, whereas the molars were the least. Higher scores of self-confidence were in administrating local anesthesia (4.24 ± 0.70, followed by root canal shaping by hand instrument (3.76 ± 0.54. No association was found between overall confidence level and the number of performed RCT (P = 0.721. No association was found between overall confidence level of students who were subjected to instrument fracture and their frequency of fracture (P = 0.507, supervisor' reaction (P = 0.587, and willingness to specialize in endodontics (P = 0.530. Conclusion: Students displayed high confidence in performing basic endodontic and treating single-rooted teeth. More exposure is recommended to enhance the students' self-confidence.
... sugar water. As the child grows, establishing proper dental hygiene will promote healthy teeth and gums which are essential to overall good health. Poor dental development, dental disease, and dental trauma can result ...
McAllister, Dora Elías; Garrison, Gwen E; Feldman, Cecile A; Anderson, Eugene L; Cook, Bryan J; Valachovic, Richard W
This report presents findings from a survey of U.S. dental school deans designed to capture their perceptions regarding the rising cost of dental education and its impact on borrowing by dental students to finance their education. The survey included questions about factors influencing the cost of dental education, concerns about dental student borrowing, and financial awareness resources for students. The survey was distributed to the deans of all 63 U.S. dental schools in January 2013; 42 deans responded, for a 67% response rate. The results indicate that, according to the responding deans, new clinical technologies, technology costs, and central university taxes are the main factors that contribute to the increasing cost of dental education. Coupled with reduced state appropriations at public dental schools and declines in private giving at all dental schools, dental school deans face a perplexing set of financial management challenges. Tuition and fees are a primary source of revenue for all dental schools; however, many deans do not have total control over the cost of attending their schools since tuition and fees are often tied to mandates and policies from the parent university and the state legislature. The findings of this study indicate that U.S. dental school deans are aware of and concerned about the impact of increases in tuition and fees on dental student debt and that they are using a variety of strategies to address the growth in dental student borrowing.
Keyes, Paul H.; Rams, Thomas E.
Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human t...
Pitts, Nigel B; Zero, Domenick T; Marsh, Phil D
Dental caries is a biofilm-mediated, sugar-driven, multifactorial, dynamic disease that results in the phasic demineralization and remineralization of dental hard tissues. Caries can occur throughout life, both in primary and permanent dentitions, and can damage the tooth crown and, in later life......, exposed root surfaces. The balance between pathological and protective factors influences the initiation and progression of caries. This interplay between factors underpins the classification of individuals and groups into caries risk categories, allowing an increasingly tailored approach to care. Dental...... caries is an unevenly distributed, preventable disease with considerable economic and quality-of-life burdens. The daily use of fluoride toothpaste is seen as the main reason for the overall decline of caries worldwide over recent decades. This Primer aims to provide a global overview of caries...
Keyes, Paul H; Rams, Thomas E
An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. These observations further document the potential protective effects of dental calculus mineralization against dental caries.
Keyes, Paul H.; Rams, Thomas E.
Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. Materials and methods A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Results Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. Conclusions These observations further document the potential protective effects of dental calculus mineralization against dental caries. PMID:27446993
Dental implant has tried at the early stage in 19th century recovering an oral function and esthetics. Technological revolutions in biochemical and new materials have developed on the remarkable change in the dental implants, nowadays we call the three generation therapy for dental implantology. There are many kinds of methods and techniques in dental implants, however a lot of troublesome complication on the process of surgical phase, construction of prothodontics and prognosis of maintenance care. In the proceedings of this symposium, I would like to propose you how to manage the maintenance care for various kind of dental implants through the methodology and case presentations. Tendenay and future for dental implants The current outlook of dental implant has increasing supply and demand not only dentists but also patients. According to Japanese Welfare Ministry's report in 1987, average missing teeth over sixty years old generations are approximately 42% in accordance with NIDR (U.S.A.) research. They are missed on ten over teeth in full 28th teeth dentitions owing to dental caries and periodontal diseases. Generally speaking, latent implant patients are occupied on the same possibility of needs for dental implants both Japan and U.S.A. Management of maintenance care The patients hardly recognized the importance of plaque control for the maintenance care in the intraoral condition after implantation. Dentists and dental staffs must be instruct patients for importance of plaque removal and control, because they already had forgotten the habit of teeth cleaning, especially in the edenturous conditions. 1) Concept of establishment in oral hygiene. Motivation and instruction for patients include very important factors in dental implants as well as in periodontal diseases. Patients who could not achieve on good oral hygiene levels obtained no good results in the long term observations. To establish good oral hygiene are how to control supra plaque surrounding tissues
Manny, E.F.; Carlson, K.C.; McClean, P.M.; Rachlin, J.A.; Segal, P.
To provide medical and scientific background on certain selected technologies generally considered to be of particular significance, the National Center for Health Care Technology (NCHCT) has commissioned a series of overview papers. This is one of several projects entered into jointly by the Bureau of Radiological Health (BRH) and NCHCT relating to the use of radiation for health care. Dental radiation protection has been a long-time interest of BRH. Both past and on-going efforts to minimize population radiation exposure from electronic products have included specific action programs directed at minimizing unnecessary radiation exposure to the population from dental radiology. Current efforts in quality assurance and referral criteria are two aspects of NCHCT's own assessment of this technology which are described within the larger picture presented in this overview. The issues considered in this document go beyond the radiation exposure aspects of dental x-ray procedures. To be responsive to the informational needs of NCHCT, the assessment includes various other factors that influence the practice of dental radiology. It is hoped this analysis will serve as the basis for planning and conducting future programs to improve the practice of dental radiology
Objective: To provide a current description of dental nursing students and to assess the reasons for choosing the dental nursing career. Methods: Between 2008 and 2009, a questionnaire survey was administered to 85 dental nursing students from 3 Colleges of Health Technology undergoing external clinical posting in ...
This paper briefly discusses caries prevalence, the multi-factorial nature of caries etiology, caries risk and the role and efficacy of fluoride. The paper also highlights research on bacterial metabolism which provided understanding of the mouth's natural defenses against caries and the basis for the development of a new technology for the everyday prevention and treatment of caries. Finally, evidence that the technology complements and enhances the anti-caries efficacy of fluoride toothpaste is summarized. Global data show that dental caries is a prevalent disease, despite the successful introduction of fluoride. Caries experience depends on the balance between consumption of sugars and oral hygiene and the use of fluoride. Three scientific concepts are fundamental to new measures to detect, treat and monitor caries: (1) dental caries is a dynamic process, (2) dental caries is a continuum of stages from reversible, pre-clinical to irreversible, clinically detectable lesions, and (3) the caries process is a balance of pathological and protective factors that can be modulated to manage caries. Fluoride functions as a protective factor by arresting and reversing the caries process, but fluoride does not prevent pathological factors that initiate the process. A novel technology, based upon arginine and an insoluble calcium compound, has been identified which targets dental plaque to prevent initiation of the caries process by reducing pathological factors. As the mechanisms of action of arginine and fluoride are highly complementary, a new dentifrice, which combines arginine with fluoride, has been developed and clinically proven to provide superior caries prevention. Copyright © 2013 Elsevier Ltd. All rights reserved.
Sossai, Najara; Universidade Paranaense - UNIPAR; Verdinelli, Ellen Carla; Universidade Paranaense - UNIPAR; Bassegio, Wagner; Universidade Paranaense - UNIPAR
O clareamento dental já é utilizado há bastante tempo na Odontologia e atualmente é um dos tratamentos odontológicos mais solicitados para obtenção de um sorriso mais estético. Classificado em clareamento caseiro e/ou de consultório, ambas as técnicas são motivo de polêmica quanto aos seus benefícios, riscos, limitações e efeito clareador, bem como sobre qual é a melhor técnica existente para a promoção de um clareamento dental eficaz e seguro. Neste contexto, o presente estudo tem por objeti...
... here to find out more. Dental Implant Surgery Dental Implant Surgery Dental implant surgery is, of course, ... to find out more. Wisdom Teeth Management Wisdom Teeth Management An impacted wisdom tooth can damage neighboring ...
... Interest Groups ADEA Governance Documents and Publications ADEA Dental Faculty Code of Conduct ADEA Bylaws ADEAGies Foundation ... Benefits for Faculty ADEA Member Benefits for Allied Dental Programs ADEA Member Benefits for Dental Schools ADEA ...
Full Text Available Background. Regenerative medicine is a new therapeutic modality using cell, stem cell and tissue engineering technologies. Purpose. To describe the regenerative capacity of dental pulp mesenchymal stem cell. Review. In dentistry, stem cell and tissue engineering technologies develop incredibly and attract great interest, due to the capacity to facilitate innovation in dental material and regeneration of dental and oral tissues. Mesenchymal stem cells derived from dental pulp, periodontal ligament and dental follicle, can be isolated, cultured and differentiated into various cells, so that can be useful for regeneration of dental, nerves, periodontal and bone tissues. Tissue engineering is a technology in reconstructive biology, which utilizes mechanical, cellular, or biological mediators to facilitate regeneration or reconstruction of a particular tissue. The multipotency, high proliferation rates and accessibility, make dental pulp as an attractive source of mesenchymal stem cells for tissue regeneration. Revitalized dental pulp and continued root development is the focus of regenerative endodontic while biological techniques that can restore lost alveolar bone, periodontal ligament, and root cementum is the focus of regenerative periodontic. Conclucion. Dentin-derived morphogens such as BMP are known to be involved in the regulation of odontogenesis. The multipotency and angiogenic capacity of DPSCs as the regenerative capacity of human dentin / pulp complex indicated that dental pulp may contain progenitors that are responsible for dentin repair. The human periodontal ligament is a viable alternative source for possible primitive precursors to be used in stem cell therapy.
Ten years have passed since the first articles appeared in this new field. The qualities of the laser light together with the need of contactless 3-D measurements for different dental purposes seemed to be extremely promising, but still just a few scientists have used the method and mostly for laboratory studies. For some reason there has been a preponderance for orthodontic measurements. This seems to be a bit peculiar from holographic view compared with measurements for engineering purposes, which usually are made on metals. So naturally holography can become a clinical tool for measurements in the field of fixed bridges, removable partial dentures and implants. One of the problems is that the need for holography in dental research must be fulfilled in collaboration with physicists. Only a two-way communication during an entire experiment can balance both technical and odontological demands and thus give practical and clinical important results. The need for an easy way of handling the evaluation to get all required information is another problem and of course the holographic equipment must be converted to a box easy to handle for everyone. At last the position of dental holography today is going to be carefully examined together with an attempt to look into the hopefully exciting and not to utopic future for this research field.
The effects of Danish cultural traditions on dental education in Denmark are described, as well as the system's current structure and developing issues. Some Danish ideas for future exports of dental education programs and dental personnel are also discussed.......The effects of Danish cultural traditions on dental education in Denmark are described, as well as the system's current structure and developing issues. Some Danish ideas for future exports of dental education programs and dental personnel are also discussed....
Student advocacy and involvement in the political process is built into the structure of the American Student Dental Association (ASDA), especially in its Legislative Grassroots Network and an internal communication network among students to ensure political awareness. Students are concerned with such issues as a universally accepted, non-patient-based licensure process, mid-level providers, loan availability and tax deductibility, financial support for schools, and service early in one's professional career (giving forward rather than giving back). Through collaboration with the American Dental Education Association and with many state associations, students participate in lobbying, awareness campaigns, and behind the scenes as legislative aids. Although students share the same love for the profession that animates established practitioners, they are perceived by legislators as being different. Students are involved in the legislative process because it represents their future.
Niemiec, Brook A
Information crucial to the diagnosis and treatment of feline oral diseases can be ascertained using dental radiography and the inclusion of this technology has been shown to be the best way to improve a dental practice. Becoming familar with the techniques required for dental radiology and radiography can, therefore, be greatly beneficial. Novices to dental radiography may need some time to adjust and become comfortable with the techniques. If using dental radiographic film, the generally recommended 'E' or 'F' speeds may be frustrating at first, due to their more specific exposure and image development requirements. Although interpreting dental radiographs is similar to interpreting a standard bony radiograph, there are pathologic states that are unique to the oral cavity and several normal anatomic structures that may mimic pathologic changes. Determining which teeth have been imaged also requires a firm knowledge of oral anatomy as well as the architecture of dental films/digital systems. This article draws on a range of dental radiography and radiology resources, and the benefit of the author's own experience, to review the basics of taking and interpreting intraoral dental radiographs. A simplified method for positioning the tubehead is explained and classic examples of some common oral pathologies are provided. © ISFM and AAFP 2014.
includes compliance with certain oral hygiene regimens or specific dental visiting patterns. The outcome of the treatment depends on both the dental professional's knowledge and skills and the patient's skills, objectives and expectations. Furthermore, dental professionals and patients should be satisfied......The aim of this paper is to illustrate how knowledge from behavioural sciences is necessary and relevant in creating a successful dental practice, benefitting patients and dental professionals. There are many ways to create a successful dental practice, the products of which are the various...... treatments performed by dentists or dental hygienists for their patients. Advanced technologies and methods are constantly improving these treatments and thus the technical and managerial aspects of dentistry. However, the success of dental practice is not only dependent on the technique applied...
ROSA, Wellington Luiz de Oliveira; SILVA, Tiago Machado; LIMA, Giana da Silveira; SILVA, Adriana Fernandes; PIVA, Evandro
ABSTRACT Objective A systematic review was conducted to analyze Brazilian scientific and technological production related to the dental materials field over the past 50 years. Material and Methods This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (Prisma) statement. Searches were performed until December 2014 in six databases: MedLine (PubMed), Scopus, LILACS, IBECS, BBO, and the Cochrane Library. Additionally, the Brazilian patent database (INPI - Instituto Nacional de Propriedade Industrial) was screened in order to get an overview of Brazilian technological development in the dental materials field. Two reviewers independently analyzed the documents. Only studies and patents related to dental materials were included in this review. Data regarding the material category, dental specialty, number of documents and patents, filiation countries, and the number of citations were tabulated and analyzed in Microsoft Office Excel (Microsoft Corporation, Redmond, Washington, United States). Results A total of 115,806 studies and 53 patents were related to dental materials and were included in this review. Brazil had 8% affiliation in studies related to dental materials, and the majority of the papers published were related to dental implants (1,137 papers), synthetic resins (681 papers), dental cements (440 papers), dental alloys (392 papers) and dental adhesives (361 papers). The Brazilian technological development with patented dental materials was smaller than the scientific production. The most patented type of material was dental alloys (11 patents), followed by dental implants (8 patents) and composite resins (7 patents). Conclusions Dental materials science has had a substantial number of records, demonstrating an important presence in scientific and technological development of dentistry. In addition, it is important to approximate the relationship between academia and industry to expand the technological development in
Rosa, Wellington Luiz de Oliveira; Silva, Tiago Machado; Lima, Giana da Silveira; Silva, Adriana Fernandes; Piva, Evandro
A systematic review was conducted to analyze Brazilian scientific and technological production related to the dental materials field over the past 50 years. This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (Prisma) statement. Searches were performed until December 2014 in six databases: MedLine (PubMed), Scopus, LILACS, IBECS, BBO, and the Cochrane Library. Additionally, the Brazilian patent database (INPI - Instituto Nacional de Propriedade Industrial) was screened in order to get an overview of Brazilian technological development in the dental materials field. Two reviewers independently analyzed the documents. Only studies and patents related to dental materials were included in this review. Data regarding the material category, dental specialty, number of documents and patents, filiation countries, and the number of citations were tabulated and analyzed in Microsoft Office Excel (Microsoft Corporation, Redmond, Washington, United States). A total of 115,806 studies and 53 patents were related to dental materials and were included in this review. Brazil had 8% affiliation in studies related to dental materials, and the majority of the papers published were related to dental implants (1,137 papers), synthetic resins (681 papers), dental cements (440 papers), dental alloys (392 papers) and dental adhesives (361 papers). The Brazilian technological development with patented dental materials was smaller than the scientific production. The most patented type of material was dental alloys (11 patents), followed by dental implants (8 patents) and composite resins (7 patents). Dental materials science has had a substantial number of records, demonstrating an important presence in scientific and technological development of dentistry. In addition, it is important to approximate the relationship between academia and industry to expand the technological development in countries such as Brazil.
Chuenjitwongsa, Supachai; Poolthong, Suchit; Bullock, Alison; Oliver, Richard G
Current policy in Southeast Asian dental education focuses on high-quality dental services from new dental graduates and the free movement of dental practitioners across the region. The Southeast Asian Nations (ASEAN) Dental Councils have proposed the "Common Major Competencies for ASEAN General Dental Practitioners" to harmonize undergraduate dental education. This article discusses how the ASEAN competencies were developed and established to assist the development of general dental practitioners with comparable knowledge, skills, and attitudes across ASEAN. The competencies were developed through four processes: a questionnaire about current national oral health problems, a two-round Delphi process that sought agreement on competencies, a panel discussion by representatives from ASEAN Dental Councils, and data verification by the representatives after the meeting. Key themes of the ASEAN competencies were compared with the competencies from the U.S., Canada, Europe, Australia, and Japan. A total of 33 competency statements, consistent with other regions, were agreed upon and approved. Factors influencing the ASEAN competencies and their implementation include oral health problems in ASEAN, new knowledge and technology in dentistry, limited institutional resources, underregulated dental schools, and uneven distribution of dental practitioners. The ASEAN competencies will serve as the foundation for further developments in ASEAN dental education including policy development, curriculum revision, quality assurance, and staff development. Collaboration amongst stakeholders is essential for successful harmonization of ASEAN dental education.
Dental radiology is emerging day by day with technological innovations and new dental radiological equipments. These sophisticated new emerging technological raise a concern about the radiation emitted by these equipments. This becomes more relevant in the context that there is frequent diagnostic radiographic exposure of head and neck region due to recurrent dental problems. The presentation deals with radiation exposure to the patients and professionals from these equipments. (author)
Dental radiography must comply with the same regulations with which conventional radiography complies. Radiation doses to individual patients are low but, because of the large number of patients X-rayed, the collective dose to the population is not negligible. Care in siting and regular maintenance of the equipment will reduce doses to both staff and patients. To produce X-ray films with a good image quality using a low radiation dose requires attention to film processing; this is often a neglected area. (Author)
Özen, B.; Yönel, N.; Çetiner, S.
Dental erozyon, plak içermeyen diş yüzeyleri üzerinde içsel ve dışsal asitlerin veya şelatların etkileriyle oluşan kimyasal bir aşınmadır. İçsel ve/veya dışsal kaynaklar nedensel faktörler olarak tanımlanırken tükürük ve pelikıl gibi biyolojik faktörler, yeme ve içme alışkanlıkları ve ağız hijyeni
Partido, Brian B; Jones, Archie A; English, Dana L; Nguyen, Carol A; Jacks, Mary E
Dental and dental hygiene faculty members often do not provide consistent instruction in the clinical environment, especially in tasks requiring clinical judgment. From previous efforts to calibrate faculty members in calculus detection using typodonts, researchers have suggested using human subjects and emerging technology to improve consistency in clinical instruction. The purpose of this pilot study was to determine if a dental endoscopy-assisted training program would improve intra- and interrater reliability of dental hygiene faculty members in calculus detection. Training included an ODU 11/12 explorer, typodonts, and dental endoscopy. A convenience sample of six participants was recruited from the dental hygiene faculty at a California community college, and a two-group randomized experimental design was utilized. Intra- and interrater reliability was measured before and after calibration training. Pretest and posttest Kappa averages of all participants were compared using repeated measures (split-plot) ANOVA to determine the effectiveness of the calibration training on intra- and interrater reliability. The results showed that both kinds of reliability significantly improved for all participants and the training group improved significantly in interrater reliability from pretest to posttest. Calibration training was beneficial to these dental hygiene faculty members, especially those beginning with less than full agreement. This study suggests that calculus detection calibration training utilizing dental endoscopy can effectively improve interrater reliability of dental and dental hygiene clinical educators. Future studies should include human subjects, involve more participants at multiple locations, and determine whether improved rater reliability can be sustained over time.
Edward F. Rossomando
Full Text Available As a result of the rapid acceptance of digital dental equipment, the dental office of 2011 looks very different from that of 1900. Despite these changes, the general dentist of 2011 performs almost the same functions as in 1900 namely the restoration of decayed teeth and the replacement of those lost due to disease. In addition to changes in technology, the last few decades of the 20th century ushered in a revolution in biology leading to the development of a genomic basis of dental disease and the development of bio-based diagnostics and therapeutics. In 2011 few if any of these bio-discoveries have changed dental practice but by 2025 we expect they will. In this editorial, Dental Hypotheses asks readers to “hypothesize” on what dental practice will be like in 2025.
Vieira, Alexandre R; Gibson, Carolyn W; Deeley, Kathleen; Xue, Hui; Li, Yong
Dental caries continues to be the most prevalent bacteria-mediated non-contagious disease of humankind. Dental professionals assert the disease can be explained by poor oral hygiene and a diet rich in sugars but this does not account for caries free individuals exposed to the same risk factors. In order to test the hypothesis that amount of amelogenin during enamel development can influence caries susceptibility, we generated multiple strains of mice with varying levels of available amelogenin during dental development. Mechanical tests showed that dental enamel developed with less amelogenin is "weaker" while the dental enamel of animals over-expressing amelogenin appears to be more resistant to acid dissolution.
Fried, Jacquelyn L
This executive summary for Section 5 of the "Advancing Dental Education in the 21 st Century" project addresses the current and future educational systems for dental assisting, dental hygiene, dental therapy, and dental laboratory technology. Nineteen experts prepared six background articles on the educational changes necessary for future roles and practices. The key issues addressed relate to delivery system changes, educational curricula, scopes of practice, regulatory measures, and the public's oral health. The major finding is that substantial reforms will be needed to adequately prepare allied oral health professionals for the changes anticipated in 2040. A reconsideration of current accreditation guidelines, more flexibility with scopes of practice, and an adherence to rigorous academic programs are essential elements for the future of these professions.
Objective: To determine the tooth brushing, tongue cleaning and snacking behaviour of dental technology and therapist students. Methods: A descriptive cross-sectional study of students of Federal School of Dental Therapy and Technology Enugu, Nigeria. Self-administered questionnaire was used to obtain information on ...
Taichman, Russell S; Green, Thomas G; Polverini, Peter J
There is a great need for leaders in the dental profession. As technological advances make our world smaller and our lives faster and more complex, we as a profession face challenges and opportunities that are evolving. Many of the changes in the scope and mode of practice will require new and different approaches. Meeting these challenges will require changes in how we as dental professionals do business; interact with our patients, other stakeholders, and health care providers; and educate our future colleagues. The purposeful incorporation of leadership education into dental and dental hygiene curricula represents an important departure from existing paradigms-but will help prepare our students to address these challenges. This article provides an overview of the development of a Scholars Program in Dental Leadership (SPDL) at the University of Michigan School of Dentistry. Our aim for the program is to create a learning environment that fosters leadership development, so that students are prepared and motivated to assume leadership positions in the profession and their communities.
Ternovoĭ, S K; Serova, N S; Ivanova, D V
To determine the capacities of radiologic studies in the examination of patients with dental anomalies. One hundred and twenty patients with dental anomalies were examined. Conventional X-ray and high-technology radiology techniques (multislice spiral computed tomography (MSSCT) and cone-beam computed tomography (CBCT)) were used. Orthopantomography is the most common method for radiologic examination of patients with dental anomalies. However, X-ray procedures do not provide complete information on the position and status of an abnormal tooth, which is required to define further patient management tactics. While planning the management, MSSCT and CBCT were performed in 56 (46.7%) and 64 (53.3%) patients, respectively. In addition, 72 (60.0%) patients in whom orthodontic treatment had been recommended at the first stage underwent MSSCT or CBCT following 7 months. CBCT showed that 4 (3.3%) patients had dental ankylosis previously undiagnosed by MSSCT. The high-technology radiology techniques could assess the position of a tooth in relation to its important anatomic structures and identify the comorbidity that keeps from being treated. MSSCT and CBCT can make in full measure the topical diagnosis of abnormal teeth and hence choose an optimal algorithm for comprehensive treatment of patients.
Leadership opportunities for dental students have opened dramatically in recent decades because of the humanistic approach to education that shares responsibility for learning between students and faculty and that values mutual respect. Technology has also had an effect because it creates instant access and global communities. This new student leadership is most apparent in the American Student Dental Association (ASDA), which recently developed a White Paper on ethics, assisted in the establishment of Student Professionalism and Ethics Clubs at schools, and is developing a policy on unsupervised dental care. Students are also demonstrating leadership in research; in dual degrees that enhance teaching and policy; and in community service and outreach.
Julie A. Holloway
Full Text Available Over the past forty years, the technological evolution of ceramics for dental applications has been remarkable, as new materials and processing techniques are steadily being introduced. The improvement in both strength and toughness has made it possible to expand the range of indications to long-span fixed partial prostheses, implant abutments and implants. The present review provides a state of the art of ceramics for dental applications.
Stuart, Jackie; Hoang, Ha; Crocombe, Len; Barnett, Tony
Collaboration between dental practitioners and non-dental primary care providers has the potential to improve oral health care for people in rural and remote communities, where access to oral health services is limited. However, there is limited research on collaboration between these professional disciplines. The purpose of this paper was to explore the relationships between dental practitioners and non-dental primary care providers from rural and remote areas of Queensland and to identify strategies that could improve collaboration between these disciplines from the perspective of dental participants. Semi-structured interviews were conducted between 2013 and 2015 with visiting, local and regional dental practitioners (n = 12) who had provided dental services to patients from eight rural and remote Queensland communities that did not have a resident dentist. Participants were purposely recruited through a snow ball sampling technique. Interview data were analysed using thematic analysis with the assistance of QSR Nvivo v.10. Four major themes emerged from the data: (1) Communication between dental practitioners and rural primary care providers; (2) Relationships between dental and primary care providers; (3) Maintenance of professional dualism; (4) Strategies to improve interprofessional relationships (with subthemes: face to face meetings; utilisation of technology; oral health training for primary care providers; and having a community based oral health contact person). Participants observed that there was a lack of communication between the dental providers who saw patients from these rural communities and the primary care providers who worked in each community. This was attributed to poor communication, the high turnover of staff and the siloed behaviours of some practitioners. Visiting dental practitioners were likely to have stronger professional relationships with hospital nursing, administrative and allied health care staff who were often long term
Patients with orofacial defects, inborn or acquired, isolated or in combination with other handicaps in syndroms, suffer from various problems including psychological problems. Morphological changes within these handicaps burden not only the patients themselves, but also their families. Among the main problems are difficulties with feeding, speech or breathing. Anomalies in number or position of deciduous and permanent teeth, development of jaws and dental arches are often present. Multidisci...
Scientific Fundamentals and Technological Development of Novel Biocompatible/Corrosion Resistant Ultrananocrystalline Diamond (UNCD) Coating Enabling Next Generation Superior Metal-Based Dental Implants
Current Ti-based dental implants exhibit failure (2-10%), due to various mechanisms, including chemical corrosion of the surface of the TiO2 naturally covered Ti-based implants. This thesis focused on developing a unique biocompatible/bio-inert/corrosion resistant/low cost Ultrananocrystalline Diamond (UNCD) coating (with 3-5 nm grain size) for encapsulation of Tibased micro-implants to potentially eliminate the corrosion/mechanical induced failure of current commercial Ti-based dental implants. Microwave Plasma Chemical Vapor Deposition (MPCVD) and Hot Filament Chemical Vapor Deposition (HFCVD) processes were used to grow UNCD coatings. The surface topography and chemistry of UNCD coatings were characterized using scanning electron microscopy (SEM), Raman, and X-ray photoelectron spectroscopies (XPS) respectively. In conclusion, this thesis contributed to establish the optimal conditions to grow UNCD coatings on the complex 3-D geometry of Ti-based micro-implants, with geometry similar to real implants, relevant to developing UNCD-coated Ti-based dental implants with superior mechanical/chemical performance than current Ti-based implants.
Hu, Jian; Yu, Hao; Shao, Jun; Li, Zhiyong; Wang, Jiawei; Wang, Yining
Background: Computer-assisted tools are rarely adopted for dental education in China. In China, 3D digital technology, such as Virtual Reality Systems, are often rejected in the dental field due to prohibitive pricing. There is also a reluctance to move away from traditional patterns of dental education. Objective: The current study is one of a…
Guo, Jingmei; Lei, Wenlong; Yang, Hongye; Huang, Cui
The bonding restoration has become an important clinical technique for the development of dental bonding technology. Because of its easy operation and the maximum preservation of tooth tissues, bonding repair is widely used in dental restoration. The recent multi-mode universal adhesives have brought new progress in dental bonding restoration. In this article the universal adhesives were reviewed according to its definition, development, improvement, application features and possible problems.
... Digital Press Kit Read the MMWR Science Clips Dental Sealants Prevent Cavities Effective protection for children Language: ... more use of sealants and reimbursement of services. Dental care providers can Apply sealants to children at ...
Dental Care in Scleroderma People living with scleroderma face unique challenges while trying to maintain their oral ... They are more likely to be affected by dental conditions such as small mouth, dry mouth, jaw ...
... CE providers and find CE courses. Commission on Dental Accreditation Explore CODA's role and find accredited schools and programs Joint Commission on National Dental Examinations Learn about the examinations used in licensing ...
Diabetes: Dental Tips For more copies contact: National Institute of Dental and Craniofacial Research National Oral Health Information Clearinghouse ... damage the gum and bone that hold your teeth in place and may lead to painful chewing ...
... Now Autumn Giving: ‘Fall’ into the Future of Dental Hygiene Support the Institute for Oral Health! Give ... best for your patients! Learn More Sidebar Menu Dental Hygiene Programs Continuing Education Career Center Annual Conference ...
Overview and documents for Dental Office Category regulation (40 CFR Part 441); comprising pretreatment standards for discharges of dental amalgam pollutants, including mercury, into publicly owned treatment works (POTWs).
Department of Veterans Affairs — Dental Encounter System (DES) is an automated health care application designed to capture critical data about the operations of VA Dental Services. Information on...
... Materials Contact Us Home Research Data & Statistics Dental Caries (Tooth Decay) Dental caries (tooth decay) remains the most prevalent chronic disease ... adults, even though it is largely preventable. Although caries has significantly decreased for most Americans over the ...
... Contact Us Home Research Data & Statistics Share Dental Caries (Tooth Decay) Dental caries (tooth decay) remains the most prevalent chronic disease ... adults, even though it is largely preventable. Although caries has significantly decreased for most Americans over the ...
GALAGAN, DONALD J.
THIS DISCUSSION PRESENTS A COMPLETE PICTURE OF THE CURRENT STATE OF DENTAL EDUCATION WITH SUGGESTIONS FOR MEETING THE DEMANDS FOR DENTAL STAFF AND FACILITIES. THE AREAS INVESTIGATED ARE (1) OBJECTIVES IN DENTAL EDUCATION--COURSES, TEACHING MODES, INNOVATIONS IN CURRICULUM, COORDINATION OF BASIC AND CLINICAL INSTRUCTION, (2) FACILITY…
A.M. Alzahem (Abdullah)
markdownabstractAbstract Dental students are facing many stressors in dental education, causing many negative outcomes. The most common are the exams and the clinical requirements. We suggest exposing the dental students to patient care as early as possible in their curriculum. This can help to
Tanzania Dental Journal. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 9, No 1 (2000) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Marketing Dental Services. R Tuominen. Abstract. No Abstract.
Conclusions: Even in resource limited settings dental caries is still the regular indication for taking dental radiographs, and periapical views are the most frequent type of radiograph ordered. Maxillary central incisors and mandibular molars were types of teeth commonly x-rayed mainly due to the aesthetic importance of the ...
Nespraydko, V P; Shevchuk, V A; Michaylov, A A; Lyseyko, N V
This clinical and laboratory study evaluated the effect of two methods of disinfection in different modes at the volume changes of alginate dental impressions and plaster models poured from them, as compared to the same parameters of plastic master models (PMM), using three-dimensional non-contact laser scanner and software. Immersion chemical disinfection for 15 min, microwave disinfection at 354 W for 10 minutes and combined disinfection with the power of 319 W for 4 minutes did not significantly affect the volumetric dimensional accuracy of the alginate impressions (P > 0.05).
Leonardi, E; Agocs, A; Fragkiskos, S; Kasfikis, N; Le Goff, J M; Cristalli, M P; Luzzi, V; Polimeni, A
The goal of the Collaboration Spotting project is to create an automatic system to collect information about publications and patents related to a given technology, to identify the key players involved, and to highlight collaborations and related technologies. The collected information can be visualized in a web browser as interactive graphical maps showing in an intuitive way the players and their collaborations (Sociogram) and the relations among the technologies (Technogram). We propose to use the system to study technologies related to Dental Science. In order to create a Sociogram, we create a logical filter based on a set of keywords related to the technology under study. This filter is used to extract a list of publications from the Web of Science™ database. The list is validated by an expert in the technology and sent to CERN where it is inserted in the Collaboration Spotting database. Here, an automatic software system uses the data to generate the final maps. We studied a set of recent technologies related to bone regeneration procedures of oro--maxillo--facial critical size defects, namely the use of Porous HydroxyApatite (HA) as a bone substitute alone (bone graft) or as a tridimensional support (scaffold) for insemination and differentiation ex--vivo of Mesenchymal Stem Cells. We produced the Sociograms for these technologies and the resulting maps are now accessible on--line. The Collaboration Spotting system allows the automatic creation of interactive maps to show the current and historical state of research on a specific technology. These maps are an ideal tool both for researchers who want to assess the state--of--the--art in a given technology, and for research organizations who want to evaluate their contribution to the technological development in a given field. We demonstrated that the system can be used for Dental Science and produced the maps for an initial set of technologies in this field. We now plan to enlarge the set of mapped
This case report presents an alternative method for fabricating an obturator for patients that develop xerostomia and mild trismus following radiation to the Head and Neck region. Multiple initial impression stages are avoided leading to less irritation to soft tissues and less discomfort to the patient. A 69-year-old male patient was referred to our dental practice by the Maxillofacial Surgery Department of the local General Hospital. The patient had undergone a right maxillectomy for removal of a Squamous Cell Carcinoma 2 weeks prior. Four endosseous dental implants were placed in the remaining upper jaw and 2 implants were inserted into the canine region of his edentulous mandible 3 weeks after ablative surgery. Five months following completion of radiotherapy and chemotherapy, a cone beam computed tomography of the maxilla was obtained, and a three dimensional model was constructed using an appropriate resin. Using the model as the detailed primary cast, a custom acrylic special tray was fabricated for the final impression of the remaining maxilla and the maxillary defect. An implant retained maxillary obturator and an implant retained mandibular overdenture were constructed to restore patient's speech, mastication and deglutition. The method presented here can limit the impression stages needed for construction of a maxillary obturator prosthesis to a single impression procedure advocating a partial digital workflow process. This can be very beneficial to the patient suffering from postradiation side-effects such as trismus, mucositis, and xerostomia.
Full Text Available This case report presents an alternative method for fabricating an obturator for patients that develop xerostomia and mild trismus following radiation to the Head and Neck region. Multiple initial impression stages are avoided leading to less irritation to soft tissues and less discomfort to the patient. A 69-year-old male patient was referred to our dental practice by the Maxillofacial Surgery Department of the local General Hospital. The patient had undergone a right maxillectomy for removal of a Squamous Cell Carcinoma 2 weeks prior. Four endosseous dental implants were placed in the remaining upper jaw and 2 implants were inserted into the canine region of his edentulous mandible 3 weeks after ablative surgery. Five months following completion of radiotherapy and chemotherapy, a cone beam computed tomography of the maxilla was obtained, and a three dimensional model was constructed using an appropriate resin. Using the model as the detailed primary cast, a custom acrylic special tray was fabricated for the final impression of the remaining maxilla and the maxillary defect. An implant retained maxillary obturator and an implant retained mandibular overdenture were constructed to restore patient's speech, mastication and deglutition. The method presented here can limit the impression stages needed for construction of a maxillary obturator prosthesis to a single impression procedure advocating a partial digital workflow process. This can be very beneficial to the patient suffering from postradiation side-effects such as trismus, mucositis, and xerostomia.
Douglass, Chester W.
Six trends affecting dental hygiene practice are discussed: demographic changes; disease pattern changes; higher societal expectations; financing and delivery system changes; technological advancement; and regulatory and legislative trends. It is argued that, though the trends reflect positively on dental hygiene, practitioners need to increase…
Abstract. Objective: To determine the perceived oral health status and treatment needs of Nigerian dental therapists in students from Federal School of Dental Therapy and Technology Enugu, Nigeria was conducted using self-administered questionnaire to obtain information on demography, self-reported oral health status, ...
Narra, N.; Antalainen, A.K.; Zipprich, H.; Sándor, G.K.; Wolff, J.
Purpose: The aim of this study was to demonstrate the potential of microcomputed tomography (micro-CT) technology in the assessment of retrieved dental implants. Cases are presented to illustrate the value of micro-CT imaging techniques in determining possible mechanical causes for dental implant
Lebon, Nicolas; Tapie, Laurent; Duret, Francois; Attal, Jean-Pierre
The dental milling machine is an important device in the dental CAD/CAM chain. Nowadays, dental numerical controlled (NC) milling machines are available for dental surgeries (chairside solution). This article provides a mechanical engineering approach to NC milling machines to help dentists understand the involvement of technology in digital dentistry practice. First, some technical concepts and definitions associated with NC milling machines are described from a mechanical engineering viewpoint. The technical and economic criteria of four chairside dental NC milling machines that are available on the market are then described. The technical criteria are focused on the capacities of the embedded technologies of these milling machines to mill both prosthetic materials and types of shape restorations. The economic criteria are focused on investment costs and interoperability with third-party software. The clinical relevance of the technology is assessed in terms of the accuracy and integrity of the restoration.
Komabayashi, Takashi; Sato, Manuel; Rodiguez, Lyly; Sato, Doris; Bird, William F
This paper provides information about Peru's dental history and dental school system, including the curriculum and dental licensure. With the increase in the number of dental schools in Peru, the number of dentists is also increasing. Until 1965, Peru had only three dental schools; currently, there are 14. Four of these dental schools are public, and ten are private. A five- or six-year dental program leads to the B.D.S. degree. After successful completion of a thesis defense or competency examination, the D.D.S. degree is awarded. The D.D.S. is mandatory for practicing dentistry in Peru. Currently, there are approximately 14,000 active dentists, with a dentist-patient ratio of approximately 1:2,000.
Minko M. Milev
Full Text Available Introduction: Integrated marketing communications (IMC are all kinds of communications between organisations and customers, partners, other organisations and society. Aim: To develop and present an integrated software model, which can improve the effectiveness of communications in dental technical services. Material and Methods: The model of integrated software is based on recommendations of a total of 700 respondents (students of dental technology, dental physicians, dental technicians and patients of dental technical laboratories in Northeastern Bulgaria. Results and Discussion: We present the benefits of future integrated software to improve the communication policy in the dental technical laboratory that meets the needs of fast cooperation and well-built communicative network between dental physicians, dental technicians, patients and students. Conclusion: The use of integrated communications could be a powerful unified approach to improving the communication policy between all players at the market of dental technical services.
Chase, Rosen and Wallace, Inc., Alexandria, VA.
A study was undertaken to describe and document the dental school dental delivery system using an integrated systems approach. In late 1976 and early 1977, a team of systems analysts and dental consultants visited three dental schools to observe the delivery of dental services and patient flow and to interview administrative staff and faculty.…
Edward F. Rossomando
Full Text Available Starting a new open access journal in a rapid growing scientific panorama is a severe challenge. However, the first issue of dental hypotheses is now history and the even skeptics can appreciate that dental hypotheses is a success - it is a journal of high quality that provides an outlet for publication of articles that encourage readers to question dental paradigms. But dental hypotheses readers might have noticed that the majority of the articles published in the first issue of dental hypotheses concern clinical dentistry. However, dental hypotheses editors recognize that there are many other areas in dentistry that present challenges and that our readers may offer suggestions for their solution. Some of these challenges relate to: dental education; digital dental technology; teledentistry and access to dental care; dental practice issues, such as, dental office design, dental office management, the slow rate of acceptance of innovative technology in the dental office; and issues related to innovation and dental entrepreneurship including intellectual property protection. Nevertheless, the dental profession faces many challenges - in many areas - and with the publication of dental hypotheses our profession has a venue for presentation of possible solutions. If you have developed a hypothesis that might help, please share it with your colleagues. As many have noted, the intellectual power of the global village in which we now live is formidable. The internet has provided the technology to bring us together and dental hypotheses has provided the venue. Please use it. New radical, speculative and non-mainstream scientific ideas are always welcome.
.... FDA-2008-N-0163] (formerly Docket No. 2001N-0067) RIN 0910-AG21 Dental Devices: Classification of Dental Amalgam, Reclassification of Dental Mercury, Designation of Special Controls for Dental Amalgam... the Federal Register of August 4, 2009 (74 FR 38686) which classified dental amalgam as a class II...
Cederberg, Robert A; Valenza, John A
Electronic health records (EHRs) are a major development in the practice of dentistry, and dental schools and dental curricula have benefitted from this technology. Patient data entry, storage, retrieval, transmission, and archiving have been streamlined, and the potential for teledentistry and improvement in epidemiological research is beginning to be realized. However, maintaining patient health information in an electronic form has also changed the environment in dental education, setting up potential ethical dilemmas for students and faculty members. The purpose of this article is to explore some of the ethical issues related to EHRs, the advantages and concerns related to the use of computers in the dental operatory, the impact of the EHR on the doctor-patient relationship, the introduction of web-based EHRs, the link between technology and ethics, and potential solutions for the management of ethical concerns related to EHRs in dental schools.
Niemiec, Brook A
Dental radiology is quickly becoming integral to the standard of care in veterinary dentistry. This is not only because it is critical for proper patient care, but also because client expectations have increased. Furthermore, providing dental radiographs as a routine service can create significant practice income. This article details numerous conditions that are indications for dental radiographs. As you will see, dental radiographs are often critical for proper diagnosis and treatment. These conditions should not be viewed as unusual; they are present within all of our practices. When you choose not to radiograph these teeth, you leave behind painful pathology. Utilizing the knowledge gained from dental radiographs will both improve patient care and increase acceptance of treatment recommendations. Consequently, this leads to increased numbers of dental procedures performed at your practice.
Dental anaesthesia should not be underestimated. Eddie Oosthuizen .... dental surgeon has limited training in airway management. ... primary teeth to hours for extensive dental conservation .... options after the extraction of permanent teeth ...
Ashri, N. Y.; Ajlan, S. A.; Aldahmash, Abdullah M.
scaffold, and guided through signaling molecules. Dental pulp stem cells have been used in an increasing number of studies in dental tissue engineering. Those cells show mesenchymal (stromal) stem cell-like properties including self-renewal and multilineage differentiation potentials, aside from...... an updated review on dental pulp stem cells and their applications in periodontal regeneration, in combination with different scaffolds and growth factors....
The benefit for the child from the judicious use of diagnostic dental radiography is improved dental health. The risk to the child from dental diagnostic radiation exposure appears to be extremely low. Despite the low risk, the dentist must minimize the child's exposure to ionizing radiation by using sound clinical judgment to determine what radiographs are necessary and to provide children with optimal protection from ionizing radiation
Hilgenfeld, Tim; Bendszus, Martin; Haehnel, Stefan
Growing distribution and utilization of digital volume tomography (DVT) extend the spectrum of clinical dental imaging. Additional diagnostic value, however, comes along with an increasing amount of radiation. In contrast, magnetic resonance imaging is a radiation free imaging technique. Furthermore, it offers a high soft tissue contrast. Morphological and numerical dental anomalies, differentiation of periapical lesions and exclusion of complications of dental diseases are field of applications for dental MRI. In addition, detection of caries and periodontal lesions and injury of inferior alveolar nerve are promising application areas in the future.
Scientific and technological advances affecting dental education in the near future are examined, including the growing role of saliva in diagnosis, direct imaging methods, biomaterials research, computer-aided design and manufacturing, molecular biology, and new restorative dentistry. It is argued that dentistry should be a fully recognized…
Full Text Available ABSTRACT Introduction: Plaster dental casts are routinely used during clinical practice to access maxillary dental arch form and assist on fabrication of individualized orthodontic archwires. Recently introduced, digital model technology may offer a limitation for the obtainment of a dental physical record. In this context, a tool for dental arch form assessment for chairside use is necessary when employing digital models. In this regard, paper print of the dental arch seems thus to be useful. Methods: In the present study, 37 lower arch models were used. Intercanine and intermolar widths and dental arch length measurements were performed and compared using plaster dental casts, digital models and paper print image of the models. Ortho Insight 3D scanner was employed for model digitalization. Results: No statistically significant differences were noted regarding the measurements performed on the plaster or digital models (p> 0.05. Paper print images, however, showed subestimated values for intercanine and intermolar widths and overestimated values for dental arch length. Despite being statistically significant (p< 0.001, the differences were considered clinically negligible. Conclusion: The present study suggests that paper print images obtained from digital models are clinically accurate and can be used as a tool for dental arch form assessment for fabrication of individualized orthodontic archwires.
Tavares, Alana; Braga, Emanuel; de Araújo, Telma Martins
ABSTRACT Introduction: Plaster dental casts are routinely used during clinical practice to access maxillary dental arch form and assist on fabrication of individualized orthodontic archwires. Recently introduced, digital model technology may offer a limitation for the obtainment of a dental physical record. In this context, a tool for dental arch form assessment for chairside use is necessary when employing digital models. In this regard, paper print of the dental arch seems thus to be useful. Methods: In the present study, 37 lower arch models were used. Intercanine and intermolar widths and dental arch length measurements were performed and compared using plaster dental casts, digital models and paper print image of the models. Ortho Insight 3D scanner was employed for model digitalization. Results: No statistically significant differences were noted regarding the measurements performed on the plaster or digital models (p> 0.05). Paper print images, however, showed subestimated values for intercanine and intermolar widths and overestimated values for dental arch length. Despite being statistically significant (p< 0.001), the differences were considered clinically negligible. Conclusion: The present study suggests that paper print images obtained from digital models are clinically accurate and can be used as a tool for dental arch form assessment for fabrication of individualized orthodontic archwires. PMID:29364382
Pervez, Anushey; Kinney, Janet S; Gwozdek, Anne; Farrell, Christine M; Inglehart, Marita R
In 2005, Public Act No. 161 (PA 161) was passed in Michigan, allowing dental hygienists to practice in approved public dental prevention programs to provide services for underserved populations while utilizing a collaborative agreement with a supervising dentist. The aims of this study were to assess how well dental and dental hygiene students and faculty members and practicing dental hygienists have been educated about PA 161, what attitudes and knowledge about the act they have, and how interested they are in additional education about it. University of Michigan dental and dental hygiene students and faculty members, students in other Michigan dental hygiene programs, and dental hygienists in the state were surveyed. Respondents (response rate) were 160 dental students (50%), 63 dental hygiene students (82%), 30 dental faculty members (26%), and 12 dental hygiene faculty members (52%) at the University of Michigan; 143 dental hygiene students in other programs (20%); and 95 members of the Michigan Dental Hygienists' Association (10%). The results showed that the dental students were less educated about PA 161 than the dental hygiene students, and the dental faculty members were less informed than the dental hygiene faculty members and dental hygienists. Responding dental hygiene faculty members and dental hygienists had more positive attitudes about PA 161 than did the students and dental faculty members. Most of the dental hygiene faculty members and dental hygienists knew a person providing services in a PA 161 program. Most dental hygiene students, faculty members, and dental hygienists wanted more education about PA 161. Overall, the better educated about the program the respondents were, the more positive their attitudes, and the more interested they were in learning more.
Committee of Tanzania Dental. Association would like to Thank. [fUfNJfNJU[[j)~ for its magnanimity towards meeting the cost of this Journal ... ceps is token out of the dental kit and the tooth is removed out of its socket. The tooth is dropped into the waste bucket. The fareceps is placed in the water basin. The socket site is ...
... needs of dental practitioners in Nigeria, Africa and international community interested in the dental practice in the developing world. The NDJ is published biannually and accepts reports of original research, review articles, clinical case reports and innovations in surgical techniques related to dentistry and allied subjects ...
Jonasson, Peter; Kirkevang, Lise-Lotte; Rosen, Annika
Acute dental pain most often occurs in relation to inflammatory conditions in the dental pulp or in the periradicular tissues surrounding a tooth, but it is not always easy to reach a diagnose and determine what treatment to perform. The anamnesis and the clinical examination provide valuable...
Al-Omari, Wael Mousa; Al-Omiri, Mahmoud Khalid
This study was designed to investigate the subjective ratings of dental anxiety levels among university students enrolled at Jordan University of Science and Technology. In addition, the present study aimed to explore the sources of dental anxiety and the impact of gender on the perceived dental anxiety and the correlation between field of study and dental anxiety level. The Modified Corah Dental Anxiety Scale was used to measure dental anxiety among the study population. Six hundred subjects were recruited into the study from Jordanian undergraduate students from the faculties of Medicine, Engineering, and Dentistry. Five hundred and thirty five complete questionnaires were returned, which accounts for a response rate of 89.2%. The totals of the mean anxiety scores were the following: Medical students, 13.58%; Engineering students, 13.27% and dental students, 11.22%. About 32% of the study population has scored 15 or more. Dental students had the lowest percentage of those who scored 15 or more. Surprisingly, the medical students were responsible for the highest percentage of those who scored 15 or above. Although women demonstrated statistically higher total dental anxiety scores than men (p= 0.03), the difference between both genders was small and could be clinically insignificant. The students were anxious mostly about tooth drilling and local anesthetic injection. Lack of adequate dental health education may result in a high level of dental anxiety among non-dental university students in Jordan. Further studies are required to identify the correlates of dental anxiety among university students.
Andreev, A. O.; Kosenko, M. S.; Petrovskiy, V. N.; Mironov, V. D.
The results of experimental studies of the effect of an ytterbium fiber laser radiation parameters on processing efficiency and quality of ZrO2 ceramics widely used in stomatology are presented. Laser operating conditions with optimum characteristics for obtaining high quality final surfaces and rapid material removal of dental structures are determined. The ability of forming thin-walled ceramic structures by laser milling technology (a minimum wall thickness of 50 μm) is demonstrated. The examples of three-dimensional dental structures created in computer 3D-models of human teeth using laser milling are shown.
Luciana Monti Lima
Full Text Available The aim of this study was to determine the cutting ability of chemical vapor deposition (CVD diamond burs coupled to an ultrasonic dental unit handpiece for minimally invasive cavity preparation. One standard cavity was prepared on the mesial and distal surfaces of 40 extracted human third molars either with cylindrical or with spherical CVD burs. The cutting ability was compared regarding type of substrate (enamel and dentin and direction of handpiece motion. The morphological characteristics, width and depth of the cavities were analyzed and measured using scanning electron micrographs. Statistical analysis using the Kruskal-Wallis test (p O objetivo deste estudo foi determinar a habilidade de corte das pontas de diamante obtidas pelo processo de deposição química a vapor (CVD associadas ao aparelho de ultra-som no preparo cavitário minimamente invasivo. Uma cavidade padronizada foi preparada nas faces mesial e distal de 40 terceiros molares, utilizando-se pontas de diamante CVD cilíndrica e esférica. A habilidade de corte foi comparada quanto ao tipo de substrato (esmalte e dentina e quanto à direção do movimento realizado com a ponta. As características morfológicas, a largura e profundidade das cavidades foram analisadas e medidas em microscopia eletrônica de varredura. A análise estatística pelo teste de Kruskal-Wallis (p < 0,05 revelou que a largura e profundidade das cavidades foram significativamente maiores em dentina. Cavidades mais largas foram obtidas quando se utilizou a ponta de diamante CVD cilíndrica, e mais profundas quando a ponta esférica foi empregada. A direção do movimento da ponta não influenciou o tamanho das cavidades, sendo os cortes produzidos pelas pontas de diamante CVD precisos e conservadores.
Background: In Tanzania, patient satisfaction with dental services has received only minor attention. Objective: To assess patients' satisfaction with public dental health services in Dar es Salaam. Design: A cross-sectional study. Setting: Five public dental clinics randomly selected from a list of all the nine public dental ...
Background: Fluoride is a double edged sword. The assessment of dental caries and fluorosis in endemic fluoride areas will facilitate in assessing the relation between fluoride concentrations in water with dental caries, dental fluorosis simultaneously. Aim: The objective of the following study is to assess the dental caries ...
The aim of this study was to determine the level of awareness of dental implant in Nigerian patients and their willingness to choose dental implant as a tooth replacement option. A survey was conducted among patients presenting for dental treatment in 3 teaching hospitals and private dental clinics in 3 urban cities of ...
Cuozzo, Frank P; Sauther, Michelle L
Teeth have long been used as indicators of primate ecology. Early work focused on the links between dental morphology, diet, and behavior, with more recent years emphasizing dental wear, microstructure, development, and biogeochemistry, to understand primate ecology. Our study of Lemur catta at the Beza Mahafaly Special Reserve, Madagascar, has revealed an unusual pattern of severe tooth wear and frequent tooth loss, primarily the result of consuming a fallback food for which these primates are not dentally adapted. Interpreting these data was only possible by combining our areas of expertise (dental anatomy [FC] and primate ecology [MS]). By integrating theoretical, methodological, and applied aspects of both areas of research, we adopted the term "dental ecology"-defined as the broad study of how teeth respond to the environment. Specifically, we view dental ecology as an interpretive framework using teeth as a vehicle for understanding an organism's ecology, which builds upon earlier work, but creates a new synthesis of anatomy and ecology that is only possible with detailed knowledge of living primates. This framework includes (1) identifying patterns of dental pathology and tooth use-wear, within the context of feeding ecology, behavior, habitat variation, and anthropogenic change, (2) assessing ways in which dental development and biogeochemical signals can reflect habitat, environmental change and/or stress, and (3) how dental microstructure and macro-morphology are adapted to, and reflect feeding ecology. Here we define dental ecology, provide a short summary of the development of this perspective, and place our new work into this context. Copyright © 2012 Wiley Periodicals, Inc.
Montazerian, Maziar; Zanotto, Edgar Dutra
The global market for dental materials is predicted to exceed 10 billion dollars by 2020. The main drivers for this growth are easing the workflow of dentists and increasing the comfort of patients. Therefore, remarkable research projects have been conducted and are currently underway to develop improved or new dental materials with enhanced properties or that can be processed using advanced technologies, such as CAD/CAM or 3D printing. Among these materials, zirconia, glass or polymer-infiltrated ceramics, and glass-ceramics (GCs) are of great importance. Dental glass-ceramics are highly attractive because they are easy to process and have outstanding esthetics, translucency, low thermal conductivity, high strength, chemical durability, biocompatibility, wear resistance, and hardness similar to that of natural teeth, and, in certain cases, these materials are bioactive. In this review article, we divide dental GCs into the following two groups: restorative and bioactive. Most restorative dental glass-ceramics (RDGCs) are inert and biocompatible and are used in the restoration and reconstruction of teeth. Bioactive dental glass-ceramics (BDGCs) display bone-bonding ability and stimulate positive biological reactions at the material/tissue interface. BDGCs are suggested for dentin hypersensitivity treatment, implant coating, bone regeneration and periodontal therapy. Throughout this paper, we elaborate on the history, processing, properties and applications of RDGCs and BDGCs. We also report on selected papers that address promising types of dental glass-ceramics. Finally, we include trends and guidance on relevant open issues and research possibilities. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 619-639, 2017. © 2016 Wiley Periodicals, Inc.
Full Text Available These days, treatment in dentistry is no longer for patient without complication, but also for patient with bad medical record. With correct treatment management in handling medical condition of patient, not only for dental treatment but also their systematic disease, all the dental staff also can improve for the better quality of life of the patient. Patient with medical compromised start to realize that keeping good oral hygiene is so important for their lives, therefore dental staff need to improve their science and technology and also for facing patient with medical compromised. This article will discuss and suggest various treatment consideration and protocol for the patient of with medical compromised.
Jokstad, Asbjørn; Shokati, Babak
To assess implant:suprastructure misfit in patients with an edentulous jaw restored by an implant-retained fixed dental prosthesis (FDP) and its association with biologic and mechanical adverse events over an extensive period. Thirty patients with an edentulous mandible treated with implant-supported prosthetics before 2000 were examined clinically in 2012. Each patient had received 4 to 6 implants to retain a FDP made from acrylic and three different metal alloys, that is, Ag-Pd, Pd-Ag, and Au type IV. The implant intra-oral locations were recorded digitally by use of an intra-oral scanner, and the intaglio surface of the detached FDP was recorded using a desktop scanner. The fit was estimated by digital matching of the STL files using industrial metrological software. The average misfit was correlated with the average marginal bone loss and the prevalence of screw loosening or fractures, using the patient as the statistical unit. Over an average of 19 years (range 12 to 32), 5 implants had been lost in 4 participants (96.7% implant survival) and 8 eight prostheses (26.7%) had been remade. Anaverage misfit was 150 μm (SD 35, range 95-232, CI 138-163). An average marginal bone loss of 2.2 mm (SD = 0.7) had occurred (range 0.6 to 5.8 mm) for individual implants. The correlation between framework misfit and marginal bone loss was weak (R² = 0.04) (P = 0.29). The prostheses with a history of screw-related adverse events showed average misfit of 169 μm (SD = 32) vs. those with no history of screw-related adverse events, that is, 134 μm (SD = 30) (P = 0.005, Student's t-test). Fourteen of the 30 participants had experienced at least one incidence of screw loosening or fracture of prosthetic or abutment screw(s) over the period of follow-up. The occurrence among the frameworks fabricated with different metal alloys did not differ (P > 0.05, Fisher's exact test). Combining STL files with best-fit algorithms to appraise misfit is feasible using
Arnett, M R; Loewen, J M; Romito, L M
Social networking applications have become an established means of communication; applications that did not exist ten years ago are now used daily. Social media can be used for a myriad of reasons including instructional tools to supplement learning. This project was designed to assess the usage of social media applications by dental school faculty members and identify the types of accounts they prefer. Four hundred forty-three full-time dental and dental hygiene faculty members from five U.S. dental schools were invited to complete a twelve-item online survey regarding their social media usage. The response rate was 50 percent (n=221). Of the respondents, nearly half were dentists, and 62 percent were ≥51 years of age. Facebook was the most popular social network, reportedly used by 111 respondents. The most often reported frequency of use was weekly (20.4 percent, n=221); users indicated utilizing a network primarily for personal rather than professional purposes. However, 37 percent of the respondents reported not using any social media. The most frequently cited barriers to the use of social media were time (48 percent) and privacy concerns (48 percent). Although few would dispute the influence social media has on today's students, the suitability and appropriateness of social media technology and its integration into dental curricula require further evaluation.
Full Text Available Dental anomalies are usual congenital malformation that can happen either as isolated findings or as a part of a syndrome. Developmental anomalies influencing the morphology exists in both deciduous and permanent dentition and shows different forms such as gemination, fusion, concrescence, dilaceration, dens evaginatus (DE, enamel pearls, taurodontism or peg-shaped laterals. All These anomalies have clinical significance concerning aesthetics, malocclusion and more necessary preparing of the development of dental decays and oral diseases. Through a search in PubMed, Google, Scopus and Medline, a total of eighty original research papers during 1928-2016 were found with the keywords such as dental anomaly, syndrome, tooth and hypodontia. One hundred review titles were identified, eighty reviews were retrieved that were finally included as being relevant and of sufficient quality. In this review, dental anomalies including gemination, fusion, concrescence, dilaceration, dens invaginatus, DE, taurodontism, enamel pearls, fluorosis, peg-shaped laterals, dentinal dysplasia, regional odontodysplasia and hypodontia are discussed. Diagnosing dental abnormality needs a thorough evaluation of the patient, involving a medical, dental, familial and clinical history. Clinical examination and radiographic evaluation and in some of the cases, specific laboratory tests are also needed. Developmental dental anomalies require careful examination and treatment planning. Where one anomaly is present, clinicians should suspect that other anomalies may also be present. Moreover, careful clinical and radiographical examination is required. Furthermore, more complex cases need multidisciplinary planning and treatment.
Nasir, Elwalid Fadul; Astrøm, Anne Nordrehaug; David, Jamil; Ali, Raouf Wahab
HIV infected patients should be expected in the Sudanese dental health care services with an increasing frequency. Dental care utilization in the context of the HIV epidemic is generally poorly understood. Focusing on Sudanese dental patients with reported unknown HIV status, this study assessed the extent to which Andersen's model in terms of predisposing (socio-demographics), enabling (knowledge, attitudes and perceived risk related to HIV) and need related factors (oral health status) predict dental care utilization. It was hypothesized that enabling factors would add to the explanation of dental care utilization beyond that of predisposing and need related factors. Dental patients were recruited from Khartoum Dental Teaching Hospital (KDTH) and University of Science and Technology (UST) during March-July 2008. A total of 1262 patients (mean age 30.7, 56.5% females and 61% from KDTH) were examined clinically (DMFT) and participated in an interview. A total of 53.9% confirmed having attended a dental clinic for treatment at least once in the past 2 years. Logistic regression analysis revealed that predisposing factors; travelling inside Sudan (OR = 0.5) were associated with lower odds and females were associated with higher odds (OR = 2.0) for dental service utilization. Enabling factors; higher knowledge of HIV transmission (OR = 0.6) and higher HIV related experience (OR = 0.7) were associated with lower odds, whereas positive attitudes towards infected people and high perceived risk of contagion (OR = 1.3) were associated with higher odds for dental care utilization. Among need related factors dental caries experience was strongly associated with dental care utilization (OR = 4.8). Disparity in the history of dental care utilization goes beyond socio-demographic position and need for dental care. Public awareness of HIV infection control and confidence on the competence of dentists should be improved to minimize avoidance behaviour and help establish dental
Greene, S K
The reintroduction and development of safe motorized instruments, the increased availability of continuing education, and the understanding and implementation of appropriate procedures allow practitioners to provide better dental care. Veterinarians realize that sedation, analgesia, a full-mouth speculum, and proper instrumentation are necessary to provide these services. Continued instrument design, future research, and new treatment and prophylactic protocols should have a positive impact on the future of equine dental health. New and rediscovered procedures for equilibrating equine occlusion are allowing horses to masticate more efficiently, carry a bit more comfortably, and experience improved performance. The horse, the horse owner, and the veterinary profession all benefit from providing complete equine dental care.
Larsen, Tove; Fiehn, Nils-Erik
and cause gingival inflammation and breakdown of supporting periodontal fibers and bone and ultimately tooth loss, i.e., gingivitis, chronic or aggressive periodontitis, and around dental implants, peri-implantitis. Furthermore, bacteria from the dental biofilm may spread to other parts of the body......-fermenting bacteria causing demineralization of teeth, dental caries, which may further lead to inflammation and necrosis in the pulp and periapical region, i.e., pulpitis and periapical periodontitis. In supra- and subgingival biofilms, predominantly gram-negative, anaerobic proteolytic bacteria will colonize...
Andreasen, Jens Ove; Lauridsen, Eva; Gerds, Thomas Alexander
Diagnosis and treatment for traumatic dental injuries are very complex owing to the multiple trauma entities represented by six luxation types and nine fracture types affecting both the primary and the permanent dentition. When it is further considered that fracture and luxation injuries are often...... problems in selecting proper treatment for some of these trauma types. To remedy this situation, an Internet-based knowledge base consisting of 4000 dental trauma cases with long-term follow up is now available to the public and the professions on the Internet using the address http://www.Dental...
Dol, Aleksandr V.; Ivanov, Dmitriy V.
Modern dentistry can not exist without dental implantation. This work is devoted to study of the "bone-implant" system and to optimization of dental prostheses installation. Modern non-invasive methods such as MRI an 3D-scanning as well as numerical calculations and 3D-prototyping allow to optimize all of stages of dental prosthetics. An integrated approach to the planning of implant surgery can significantly reduce the risk of complications in the first few days after treatment, and throughout the period of operation of the prosthesis.
Minko M. Milev
Full Text Available Purpose: Analysis of the attitude of dental physicians, dental technicians, patients and students of dental technology, about the marketing communication in the work of dental technical laboratories. Material and Methods: The main study was conducted on the territory of Northeastern Bulgaria, using direct anonymous paper questionnaires in the period between April and July 2015. A total of 700 respondents were interviewed, distributed into four groups (dental physicians, dental technicians, students of dental technology and patients of dental laboratories. Results and Discussion: The study was designed to investigate the satisfaction with marketing communications among all participants in dental laboratory activities. Satisfaction of dental physicians with aspects of marketing communication of dental laboratories was 47,39% (n=127, and a negative answer was given from 22,76% (n = 61 of respondents. The majority of dental technicians (75,91%, n=104 were satisfied with aspects of marketing communication with dental clinics/dental physicians, while 29,85% (n = 80 weren’t satisfied. The study of the satisfaction with the communication among the students showed that 60,42% (n=116 of them were satisfied and lack of satisfaction with communication was reported by 1,56% (n=3 of the respondents. Among the studied patients, 81,55% (n=84 felt satisfied with the communication carried out at the dental clinics, and 8,74% (n = 9 among patients were not satisfied. Conclusion: The integrated communications may successfully achieve the goals of a given communication campaign by a well-coordinated utilisation of the different kinds of IMC instruments: advertising, public relations (PR, personal sales, sales promotions and others. The desired synergy is attained when all the IMC instruments are synchronised and mutually enhanced.
Lazar, Vickie F; Guay, Albert H; Beazoglou, Tryfon J
The fact that a significant percentage of dentists employ dental hygienists raises an important question: Are dental practices that utilize a dental hygienist structurally and operationally different from practices that do not? This article explores differences among dental practices that operate with and without dental hygienists. Using data from the American Dental Association's 2003 Survey of Dental Practice, a random sample survey of U.S. dentists, descriptive statistics were used to compare selected characteristics of solo general practitioners with and without dental hygienists. Multivariate regression analysis was used to estimate the effect of dental hygienists on the gross billings and net incomes of solo general practitioners. Differences in practice characteristics--such as hours spent in the practice and hours spent treating patients, wait time for a recall visit, number of operatories, square feet of office space, net income, and gross billings--were found between solo general practitioners who had dental hygienists and those who did not. Solo general practitioners with dental hygienists had higher gross billings. Higher gross billings would be expected, as would higher expenses. However, net incomes of those with dental hygienists were also higher. In contrast, the mean waiting time for a recall visit was higher among dentists who employed dental hygienists. Depending on personal preferences, availability of qualified personnel, etc., dentists who do not employ dental hygienists but have been contemplating that path may want to further research the benefits and opportunities that may be realized.
Lemaster, Margaret; Flores, Joyce M; Blacketer, Margaret S
This study explored the effectiveness of simulated mouth models to improve identification and recording of dental restorations when compared to using traditional didactic instruction combined with 2-dimensional images. Simulation has been adopted into medical and dental education curriculum to improve both student learning and patient safety outcomes. A 2-sample, independent t-test analysis of data was conducted to compare graded dental recordings of dental hygiene students using simulated mouth models and dental hygiene students using 2-dimensional photographs. Evaluations from graded dental charts were analyzed and compared between groups of students using the simulated mouth models containing random placement of custom preventive and restorative materials and traditional 2-dimensional representations of didactically described conditions. Results demonstrated a statistically significant (p≤0.0001) difference: for experimental group, students using the simulated mouth models to identify and record dental conditions had a mean of 86.73 and variance of 33.84. The control group students using traditional 2-dimensional images mean graded dental chart scores were 74.43 and variance was 14.25. Using modified simulation technology for dental charting identification may increase level of dental charting skill competency in first year dental hygiene students. Copyright © 2016 The American Dental Hygienists’ Association.
Al-Nasser, Lubna; Al-Ehaideb, Ali; Househ, Mowafa
Dental informatics is an emerging field that has the potential to transform the dental profession. This study aims to summarize the current applications of dental informatics in Saudi Arabia and to identify the challenges facing expansion of dental informatics in the Saudi context. Search for published articles and specialized forum entries was conducted, as well as interviews with dental professionals familiar with the topic. Results indicated that digital radiography/analysis and administrative management of dental practice are the commonest applications used. Applications in Saudi dental education included: web-based learning systems, computer-based assessments and virtual technology for clinical skills' teaching. Patients' education software, electronic dental/oral health records and the potential of dental research output from electronic databases are yet to be achieved in Saudi Arabia. Challenges facing Saudi dental informatics include: lack of IT infrastructure/support, social acceptability and financial cost. Several initiatives are taken towards the research in dental informatics. Still, more investments are needed to fully achieve the potential of various application of informatics in dental education, practice and research.
Lazea, Andreea; Todea, Carmen
Objectives: To evaluate the dental anxiety level and the degree of acceptance of laser assisted pedodontic treatments from the children part. Also, we want to underline the advantages of laser use in pediatric dentistry, to make this technology widely used in treating dental problems of our children patients. Methods: Thirty pediatric dental patients presented in the Department of Pedodontics, University of Medicine and Pharmacy "Victor Babeş", Timişoara were evaluated using the Wong-Baker pain rating scale, wich was administered postoperatory to all patients, to assess their level of laser therapy acceptance. Results: Wong-Baker faces pain rating scale (WBFPS) has good validity and high specificity; generally it's easy for children to use, easy to compare and has good feasibility. Laser treatment has been accepted and tolerated by pediatric patients for its ability to reduce or eliminate pain. Around 70% of the total sample showed an excellent acceptance of laser dental treatment. Conclusions: Laser technology is useful and effective in many clinical situations encountered in pediatric dentistry and a good level of pacient acceptance is reported during all laser procedures on hard and soft tissues.
Behbehani, J M
For a long time there has been a need to establish a dental school in Kuwait, due to the fact that the majority of dentists working in Kuwait are expatriates from various countries. An Amiri decree in 1996 made it possible, and the first dental students were admitted to the Kuwait University Faculty of Dentistry in 1998. The mission of the Faculty of Dentistry is 'to promote oral health in Kuwait through education, research and cooperation with other professional health care institutions as well as the community at large'. A 6.5-year dental curriculum was completed after 2 years of committee work and was accepted by the University Council in 2001. This curriculum incorporates current trends in medical and dental education, such as the evidence-based and community-based approaches, problem-solving methodology for outcome-based learning, and competency achieved through comprehensive patient care. Copyright 2003 S. Karger AG, Basel
Smits, Marten Titus
Dental caries is a widespread multifactoral disease. The main sympthons are minaral loss from tooth enemal and dentine, eventually leading to total destruction of the teeth, pain, impairment of mastication and problems with facial esthetics. ... Zie: Summary
Brown, J E
The number of dental radiographs taken in the UK has steadily increased over the past 20 years--recently estimating around 18 million taken in the general dental services alone, and dental radiographs now account for nearly 25% of all medical radiographic exposures. Radiographs remain our most useful diagnostic aid. Their strength is in demonstrating hard tissue pathology, which makes radiographs particularly effective in the maxillofacial region. Although well accepted in this capacity, there remain a number of limitations and drawbacks to conventional radiographs which recent developments have begun to overcome. There have been improvements in the scope and capabilities of dental imaging equipment. There has also been a continuing effort to reduce radiation-induced harm by limiting our exposure to it. This has been possible both through the introduction of new methods and protocols for reducing individual radiation exposures and by the creation of guidelines for selecting radiographs more effectively and thereby reducing the total number of radiographs taken.
... more... Coffee and Doughnuts: A Disastrous Combo for Teeth? The sugars in doughnuts have been identified as ... More print this article enlarge text Glossary of Dental Terms Oral Health Defined Amalgam silver/mercury alloy ...
... risks associated with tobacco, substance abuse and oral piercings. Why it's done Regular dental exams help protect ... sugary beverages Smoking Chewing tobacco Eating disorders Oral piercings Not wearing a mouthguard during contact sports The ...
INSTRUCTIONS FOR AUTHORS AND CONTRIBUTORS The Nigerian Dental ... review articles, clinical case reports and innovations in surgical techniques ... figures and illustrations, including one copy stored in a 3.5” floppy should be sent to ...
Georgia Univ., Athens. Dept. of Vocational Education.
This publication contains statewide standards for the dental assisting program in Georgia. The standards are divided into 12 categories: foundations (philosophy, purpose, goals, program objectives, availability, evaluation); admissions (admission requirements, provisional admission requirements, recruitment, evaluation and planning); program…
Birnbaum, Nathan S; Aaronson, Heidi B
The technologies that have made the use of three-dimensional (3D) digital scanners an integral part of many industries for decades have been improved and refined for application to dentistry. Since the introduction of the first dental impressioning digital scanner in the 1980s, development engineers at a number of companies have enhanced the technologies and created in-office scanners that are increasingly user-friendly and able to produce precisely fitting dental restorations. These systems are capable of capturing 3D virtual images of tooth preparations, from which restorations may be fabricated directly (ie, CAD/CAM systems) or fabricated indirectly (ie, dedicated impression scanning systems for the creation of accurate master models). The use of these products is increasing rapidly around the world and presents a paradigm shift in the way in which dental impressions are made. Several of the leading 3D dental digital scanning systems are presented and discussed in this article.
Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…
Cushman, R.H.; Kircher, D.R.; Hart, F.W.; Ciavattoni, A.
Apparatus is described for improving the handling rate of patients in panoramic dental radiography when tube head-camera assembly of a low silhouette panoramic dental X-ray machine is rotated for a scan in one direction only. This is effected by fast return of the tube head-camera assembly with its simultaneous elevation, thus facilitating the radiographed patient's exit from the machine and the entrance of another patient. Fast speed is about twice the scanning speed. (author)
Marília Afonso Rabelo Buzalaf
Full Text Available Dental erosion is a multifactorial condition. The consideration of chemical, biological and behavioral factors is fundamental for its prevention and therapy. Among the biological factors, saliva is one of the most important parameters in the protection against erosive wear. Objective: This review discusses the role of salivary factors on the development of dental erosion. Material and Methods: A search was undertaken on MeDLINe website for papers from 1969 to 2010. The keywords used in the research were "saliva", "acquired pellicle", "salivary flow", "salivary buffering capacity" and "dental erosion". Inclusion of studies, data extraction and quality assessment were undertaken independently and in duplicate by two members of the review team. Disagreements were solved by discussion and consensus or by a third party. Results: Several characteristics and properties of saliva play an important role in dental erosion. Salivary clearance gradually eliminates the acids through swallowing and saliva presents buffering capacity causing neutralization and buffering of dietary acids. Salivary flow allows dilution of the acids. In addition, saliva is supersaturated with respect to tooth mineral, providing calcium, phosphate and fluoride necessary for remineralization after an erosive challenge. Furthermore, many proteins present in saliva and acquired pellicle play an important role in dental erosion. Conclusions: Saliva is the most important biological factor affecting the progression of dental erosion. Knowledge of its components and properties involved in this protective role can drive the development of preventive measures targeting to enhance its known beneficial effects.
Buzalaf, Marília Afonso Rabelo; Hannas, Angélicas Reis; Kato, Melissa Thiemi
Dental erosion is a multifactorial condition. The consideration of chemical, biological and behavioral factors is fundamental for its prevention and therapy. Among the biological factors, saliva is one of the most important parameters in the protection against erosive wear. This review discusses the role of salivary factors on the development of dental erosion. A search was undertaken on MeDLINe website for papers from 1969 to 2010. The keywords used in the research were "saliva", "acquired pellicle", "salivary flow", "salivary buffering capacity" and "dental erosion". Inclusion of studies, data extraction and quality assessment were undertaken independently and in duplicate by two members of the review team. Disagreements were solved by discussion and consensus or by a third party. Several characteristics and properties of saliva play an important role in dental erosion. Salivary clearance gradually eliminates the acids through swallowing and saliva presents buffering capacity causing neutralization and buffering of dietary acids. Salivary flow allows dilution of the acids. In addition, saliva is supersaturated with respect to tooth mineral, providing calcium, phosphate and fluoride necessary for remineralization after an erosive challenge. Furthermore, many proteins present in saliva and acquired pellicle play an important role in dental erosion. Saliva is the most important biological factor affecting the progression of dental erosion. Knowledge of its components and properties involved in this protective role can drive the development of preventive measures targeting to enhance its known beneficial effects.
Curtis, Donald A; Jayanetti, Jay; Chu, Raymond; Staninec, Michal
The clinical signs of dental erosion are initially subtle, yet often progress because the patient remains asymptomatic, unaware and uninformed. Erosion typically works synergistically with abrasion and attrition to cause loss of tooth structure, making diagnosis and management complex. The purpose of this article is to outline clinical examples of patients with dental erosion that highlight the strategy of early identification, patient education and conservative restorative management. Dental erosion is defined as the pathologic chronic loss of dental hard tissues as a result of the chemical influence of exogenous or endogenous acids without bacterial involvement. Like caries or periodontal disease, erosion has a multifactorial etiology and requires a thorough history and examination for diagnosis. It also requires patient understanding and compliance for improved outcomes. Erosion can affect the loss of tooth structure in isolation of other cofactors, but most often works in synergy with abrasion and attrition in the loss of tooth structure (Table 1). Although erosion is thought to be an underlying etiology of dentin sensitivity, erosion and loss of tooth structure often occurs with few symptoms. The purpose of this article is threefold: first, to outline existing barriers that may limit early management of dental erosion. Second, to review the clinical assessment required to establish a diagnosis of erosion. And third, to outline clinical examples that review options to restore lost tooth structure. The authors have included illustrations they hope will be used to improve patient understanding and motivation in the early management of dental erosion.
Wiederman, Arthur S
Purchasing a dental practice can be a minefield. The office you are looking at could be the most beautiful office with all of the newest technology. But if it is not profitable, it will be a nightmare. This article will help navigate what the dentist and his or her CPA should be looking at when reviewing the books and records, based on the author's experience of reviewing more than 400 dental practices on behalf of buyers.
Conclusions: Biofilm formation in DUWLs is inevitable with the subsequent release of part of microbiota into the otherwise sterile dental settings. These consequences can be quite serious on clinicians and dental patients. Though conventional measures in water decontamination have been partly successful, the quest for more foolproof methods has led to the use of latest technology, i.e., nanotechnology. The most practical option has to be chosen based on the ease of their usage.
... New Research AADSM Highlights Members More news... Dental Sleep Medicine: An area of dental practice that focuses on ... SomnoMed Silver Sponsors Copyright © American Academy of Dental Sleep Medicine, All Rights Reserved. American Academy of Dental Sleep ...
To determine the use of the Internet by patients attending a range of dental clinics to search for information regarding dental procedures, and also to investigate their interest in online dental consultations and \\'dental tourism\\'.
... 42 Public Health 1 2010-10-01 2010-10-01 false Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography G Appendix G to Part 75 Public Health PUBLIC HEALTH SERVICE...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section...
Crawford, W H
Total expenditures and revenues of 58 US dental school were derived from reports of the ADA Division of Educational Measurements. These financial data were studied by type of dental school (public, state-related private, and private) and by expenditure/revenue categories. Dental schools showed little diversity in expenditures: most were directed toward instruction; few were directed toward research or continuing education. Several distinctive patterns among the three types of dental schools in revenues were observed. Two configurations emerged: public and state-related private dental schools receive more than 75% of their revenues from government and tuition, and private dental schools, more than 50%.
Tapie, L; Lebon, N; Mawussi, B; Fron Chabouis, H; Duret, F; Attal, J-P
As digital technology infiltrates every area of daily life, including the field of medicine, so it is increasingly being introduced into dental practice. Apart from chairside practice, computer-aided design/computer-aided manufacturing (CAD/CAM) solutions are available for creating inlays, crowns, fixed partial dentures (FPDs), implant abutments, and other dental prostheses. CAD/CAM dental solutions can be considered a chain of digital devices and software for the almost automatic design and creation of dental restorations. However, dentists who want to use the technology often do not have the time or knowledge to understand it. A basic knowledge of the CAD/CAM digital workflow for dental restorations can help dentists to grasp the technology and purchase a CAM/CAM system that meets the needs of their office. This article provides a computer-science and mechanical-engineering approach to the CAD/CAM digital workflow to help dentists understand the technology.
the variance in regards to overall satisfaction. 15. SUBJECT TERMS Dentistry, Patient Satisfaction, Military, Consumer Satisfaction, Dental... patient satisfaction in military dental treatment facilities. Dental health is extremely important for the military as dental assets are not always... customer satisfaction is an important component of military dental care. Quarterly patient satisfaction reports are generated for each dental treatment
Bowen, Denise M
Dental hygiene is defined as the science and practice of the recognition, treatment and prevention of oral diseases. The history of dental hygiene research is considered in the context of the development of the discipline and an emerging infrastructure. Research-related events supporting the growth and maturation of the profession are considered from the early years to the most recent. The benefits of preventive oral health services provided by dental hygienists have been supported by research, and the practice of dental hygiene has expanded as a result of research findings since its inception 100 years ago. Dental hygienists' engagement in research, however, did not begin until the 1960s as research associates or administrators, primarily with dental researchers as primary investigators. The Journal of Dental Hygiene (JDH) has provided information for dental hygiene practice since 1927, and has been the primary venue for dissemination of dental hygiene research since 1945. Graduate education in dental hygiene at the master's degree level and the work of early dental hygiene researchers led to the first conference on dental hygiene research in 1982. Over 30 years later, dental hygiene has established a meta-paradigm and defined conceptual models, built an initial infrastructure to support research endeavors and contributed much to the development of dental hygiene as a unique discipline. A doctoral degree in the discipline, continued theory-based research, initiatives to foster collaborations between dental hygiene and other researchers and enhanced capabilities to attract funding to support large scale studies are goals that must be attained through the efforts of future researchers to address the needs for additional development in the discipline of dental hygiene. Dental hygiene research supports the growing discipline and its value to society.
Xuedong, Zhou; Dingming, Huang; Jianguo, Liu; Zhengwei, Huang; Xin, Wei; Deqin, Yang; Jin, Zhao; Liming, Chen; Lin, Zhu; Yanhong, Li; Jiyao, Li
The development of an expert consensus on vital pulp therapy can provide practical guidance for the improvement of pulp damage care in China. Dental pulp disease is a major type of illness that adversely affects human oral health. Pulp capping and pulpotomy are currently the main methods for vital pulp therapy. Along with the development of minimal invasion cosmetic dentistry, using different treatment technologies and materials reasonably, preserving healthy tooth tissue, and extending tooth save time have become urgent problems that call for immediate solution in dental clinics. This paper summarizes the experiences and knowledge of endodontic experts. We develop a clinical path of vital pulp therapy for clinical work by utilizing the nature, approach, and degree of pulp damage as references, defense and self-repairing ability of pulp as guidance, and modern technologies of diagnosis and treatment as means.
Kovacs, E; Szocska, G
Hungary has become a popular destination for foreign patients in the last two decades, particularly in dental care. Since 2008, increasing prices in Western Europe coupled with Hungary's accessibility and availability of dental treatment, has meant the country has become a leader in 'dental tourism'. As the quality of care in Hungary is high and prices are more affordable than in Western Europe, and due to the freedom of movement of people, services and goods within the EU, patient flow into Hungary has increased progressively. The aim of this article is to provide comprehensive empirical evidence from the perspective of a recipient country in dental tourism. A questionnaire survey was conducted among Hungarian dentists (n = 273). Qualitative in-depth interviews were conducted with representatives of dental professional bodies (n = 10). Both research methods aimed to elicit dentists' views on the presence of dental tourism - particularly the push and pull factors (for example, source countries, competitors, information sources, patient motivation). The findings show that there are several reasons why Hungary could maintain a leading position in dental tourism. First, the cost/benefit ratio is outstanding. The affordable price and value for money were already recognised in the early 1990s and were appreciated even before Hungary joined the EU. Secondly, the high quality of Hungary's dental profession: a) dental professionals in Hungary are well-qualified dental practitioners who have received high level dental training; b) dental professional standards are up-to-date and often supervised; c) in Hungary dental technology, the quality of materials and equipment used in dental practices is of European level quality. The rate of complications in dental care is around 5%, similar to other European countries. Finally, previous treatment experiences are positive and patient satisfaction levels are high. More and more patients seek care in Hungary, and more and more
Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster
Gross, Karen B. W.; And Others
Dentists and dental hygienists are in a unique position to identify an eating disorder patient from observed oral manifestations and to refer the patient for psychological therapy. The inclusion of information on general and oral complications of bulimia and anorexia nervosa in dental and dental hygiene curriculum was examined. (MLW)
Objective: To evaluate hand washing attitude and practices among Dentists and Dental Students treating patients in a Nigerian Tertiary Dental Clinic. Materials and Methods: A cross-sectional survey of Dentists and Dental Students treating patients in University of Benin Teaching Hospital was conducted between February ...
Reasons for delayed reporting for oral care were negligence (53.5%); poor dental services or visited but not treated (19.4%); financial reasons (14.8%); and dental fear (12.3%). Seventy seven percent of respondents who had toothache due to advanced dental caries were aware that the aching tooth was decayed, of which, ...
Objectives: This study aimed to investigate the preference profiles of various types of diagnostic tools and methods used by private dental practitioners in Ankara for detecting dental caries. Methods: Private dental practitioners, in five districts of Ankara, were provided with questionnaires comprising demographic ...
Nash, David A.; And Others
Dental education in the Netherlands is reviewed in terms of dental practice, overall development, structure and functioning of a typical school of dentistry, admissions, student finances, curriculum, certification, postgraduate education, and education for related professions. (MSE)
... A RadiationAnswers.org Ask the Experts Medical and Dental Patient Issues What's My Risk? The risks of ... developed by our topic editors for this category: Dental-Patient Issues Medical CT Reference Books and Articles ...
U.S. Department of Health & Human Services — Dental health is an important part of peoples overall health. States are required to provide dental benefits to children covered by Medicaid and the Childrens Health...
Bennike, Pia; Alexandersen, Verner
Skeleton remains from Denmark, Greenland, Faeroe Islands, dental care, drillling in the past, tooth extraction......Skeleton remains from Denmark, Greenland, Faeroe Islands, dental care, drillling in the past, tooth extraction...
Dental Health THE BASIC FACTS MULTIPLE SCLEROSIS Kim, diagnosed in 1986 People with a chronic disease may neglect their general health and wellness, research shows. Dental care is no exception. A tendency to focus ...
... this page: //medlineplus.gov/ency/article/003426.htm Dental plaque identification at home To use the sharing ... a sticky substance that collects around and between teeth. The home dental plaque identification test shows where ...
This guide provides the dentist and dental support personnel with basic information on the safe use of x-rays in dental radiography. Included in this CODE are specific recommendations for eliminating unnecessary radiation exposure of both patients and staff
Md Saion Salikin; Azuhar Ripin; Wan Hazlinda Ismail; Asmaliza Hashim; Norriza Mohd Isa; Suriany Sarmid
Since the invention and the discovery of x-rays, physicians, surgeons and life scientists have been using images to diagnose and subsequently treat diseases. X-ray is also widely used in many imaging techniques to better understand basics anatomy, physiology and biology as well as testing and analytical work in physical science. In dentistry, x-ray technique has been employed to get a panoramic view of the whole teeth of a particular patient. A panoramic dental radiograph is very useful in dentistry for diagnostic purpose, denture preparation, as well as for orthodontic. Image visualisation is an important aspect especially for the dentists to analyse and proceed with a particulate dental treatment. In this project panoramic dental image obtained by using a standard phantom is visualised by using Interactive Data Language (IDL) software. A panoramic dental x-ray machine, Cranex3, is used to get a panoramic radiograph, which is subsequently digitized, by using Vidar digitizer (Sierra Plus). The 2D digitized image is enhance and apply other visualising techniques such as surface rendering and volume rendering technique using Interactive Data Language (IDL) software as a first step in 3D visualisation. In this paper, visualising of panoramic dental radiograph by using IDL is discussed in brief. (Author)
Tax, Cara L; Robb, Christine L; Brillant, Martha G S; Doucette, Heather J
It is not known whether the integration of photo-stimulable phosphor (PSP) plates into dental and dental hygiene curricula creates unique learning challenges for students. The purpose of this two-year study was to determine if dental hygiene students had more and/or different types of errors when using PSP plates compared to film and whether the PSP imaging plates had any particular characteristics that needed to be addressed in the learning process. Fifty-nine first-year dental hygiene students at one Canadian dental school were randomly assigned to two groups (PSP or film) before exposing their initial full mouth series on a teaching manikin using the parallel technique. The principal investigator determined the number and types of errors based on a specific set of performance criteria. The two groups (PSP vs. film) were compared for total number and type of errors made. Results of the study indicated the difference in the total number of errors made using PSP or film was not statistically significant; however, there was a difference in the types of errors made, with the PSP group having more horizontal errors than the film group. In addition, the study identified a number of unique characteristics of the PSP plates that required special consideration for teaching this technology.
Ballard, Richard W; Hagan, Joseph L; Townsend, Janice A; Ballard, Mary B; Armbruster, Paul C
Students and faculty members in the health professions classroom are expected to exhibit professional behaviors that are conducive to maintaining a positive learning environment, but there is little published research concerning incivility in the area of dental education. The aim of this study was to evaluate differences in perceptions of incivility between dental faculty and students, between students in different courses of study, and between students in different years of dental study. The study utilized an anonymous electronic survey of all dental faculty and administrators and all dental, dental hygiene, and dental laboratory technology students at a single institution. The survey instrument contained questions concerning perceived uncivil behavior in the classroom and clinical settings. Response rates were 54% for faculty and administrators and ranged from 60% to 97% for students in various years and programs. The results were analyzed based on gender, course of study, year of study, and ethnicity. Significant differences were found regarding perceptions of civil behaviour between faculty and students, male and female students, the year of study, and the course of study. These differences point to the need for further research as well as administrative leadership and faculty development to define guidelines in this area in order to ensure a positive learning environment.
Amin, Wala Majid; Al-Ali, Muna H.; Duaibis, Ramzi B.; Oweis, Tamara; Badran, Darwish H.
Background The study aimed to evaluate the level of burnout among the clinical dental students in two Jordanian universities. Methods A total of 307 students from the two schools were surveyed using Maslach Burnout Inventory survey. Scores for the inventory’s subscales were calculated and the mean values for the students’ groups were computed separately. Kruskal-Wallis and Mann-Whitney tests were carried out and the results were compared at 95% confidence level. Results The results showed that the dental students in both Jordanian universities suffered high levels of emotional exhaustion and depersonalization compared to reported levels for dental students in other countries. The dental students of the University of Jordan demonstrated a significantly higher (p < 0.05) level of emotional exhaustion than their counterparts in the Jordan University of Science and Technology. Conclusions The findings indicated that dental students in the Jordanian universities presented considerable degrees of burnout manifested by high levels of emotional exhaustion and depersonalization. Studies targeting students health and psychology should be carried out to determine the causes of burnout among dental students. The curricula of the dental schools in the two universities should be accordingly improved to minimize burnout among the students. Keywords Burnout; Emotional exhaustion; Depersonalization; Personal accomplishment; Maslach Burnout Inventory PMID:22461870
Dhamo, Brunilda; Elezi, Besiana; Kragt, Lea; Wolvius, Eppo B; Ongkosuwito, Edwin M
Although a link between dietary changes, caries, and dental development has been observed, the literature provides little insight about this relationship. The aim of our study was to investigate the association between dental caries and dental development in a clinical sample of Albanian children and adolescents. In total, 118 children and adolescents, born between 1995 and 2004 and aged 6–15 years, were included. Dental caries in the deciduous dentition was assessed using the Decayed, Filled Teeth (dft) index and dental caries in the permanent dentition was assessed using the Decayed, Missing, Filled Teeth (DMFT) index. Dental development during the permanent dentition was determined using the Demirjian method. Linear and ordinal regression models were applied to analyze the associations of dental caries with dental age and developmental stages of each left mandibular tooth. Dental caries in the deciduous dentition, estimated as a median dft of 2.0 (90% range, 0.0–9.1), was significantly associated with lower dental age (β = -0.21; 90% CI: -0.29, -0.12) and with delayed development of the canine, both premolars, and the second molar. Untreated dental caries (dt) was associated with lower dental age (β = -0.19; 90% CI: -0.28, -0.10). Dental caries in the permanent dentition, estimated as a median DMFT of 1.0 (90% range, 0.0–8.0), was not significantly associated with dental age (β = 0.05; 90% CI: -0.04, 0.14). However, the DMFT was associated with the advanced stages of development of both premolars and the second molar. The untreated dental caries in the deciduous dentition delays the development of permanent teeth. PMID:29659350
Inscoe, Christina R.; Wu, Gongting; Soulioti, Danai E.; Platin, Enrique; Mol, Andre; Gaalaas, Laurence R.; Anderson, Michael R.; Tucker, Andrew W.; Boyce, Sarah; Shan, Jing; Gonzales, Brian; Lu, Jianping; Zhou, Otto
Despite recent advances in dental radiography, the diagnostic accuracies for some of the most common dental diseases have not improved significantly, and in some cases remain low. Intraoral x-ray is the most commonly used x-ray diagnostic tool in dental clinics. It however suffers from the typical limitations of a 2D imaging modality including structure overlap. Cone-beam computed tomography (CBCT) uses high radiation dose and suffers from image artifacts and relatively low resolution. The purpose of this study is to investigate the feasibility of developing a stationary intraoral tomosynthesis (s-IOT) using spatially distributed carbon nanotube (CNT) x-ray array technology, and to evaluate its diagnostic accuracy compared to conventional 2D intraoral x-ray. A bench-top s-IOT device was constructed using a linear CNT based X-ray source array and a digital intraoral detector. Image reconstruction was performed using an iterative reconstruction algorithm. Studies were performed to optimize the imaging configuration. For evaluation of s-IOT's diagnostic accuracy, images of a dental quality assurance phantom, and extracted human tooth specimens were acquired. Results show s-IOT increases the diagnostic sensitivity for caries compared to intraoral x-ray at a comparable dose level.
Said, Eyad; Fahmy, Gamal F.; Nassar, Diaa; Ammar, Hany
Law enforcement agencies have been exploiting biometric identifiers for decades as key tools in forensic identification. With the evolution in information technology and the huge volume of cases that need to be investigated by forensic specialists, it has become important to automate forensic identification systems. While, ante mortem (AM) identification, that is identification prior to death, is usually possible through comparison of many biometric identifiers, postmortem (PM) identification, that is identification after death, is impossible using behavioral biometrics (e.g. speech, gait). Moreover, under severe circumstances, such as those encountered in mass disasters (e.g. airplane crashers) or if identification is being attempted more than a couple of weeks postmortem, under such circumstances, most physiological biometrics may not be employed for identification, because of the decay of soft tissues of the body to unidentifiable states. Therefore, a postmortem biometric identifier has to resist the early decay that affects body tissues. Because of their survivability and diversity, the best candidates for postmortem biometric identification are the dental features. In this paper we present an over view about an automated dental identification system for Missing and Unidentified Persons. This dental identification system can be used by both law enforcement and security agencies in both forensic and biometric identification. We will also present techniques for dental segmentation of X-ray images. These techniques address the problem of identifying each individual tooth and how the contours of each tooth are extracted.
Rosenblum, Alvin B; Wolf, Steve
Dental ethics is often taught, viewed, and conducted as an intell enterprise, uninformed by other noncognitive factors. Emotional intelligence (EQ) is defined distinguished from the cognitive intelligence measured by Intelligence Quotient (IQ). This essay recommends more inclusion of emotional, noncognitive input to the ethical decision process in dental education and dental practice.
Neenan, M. Elaine; And Others
A study describes the characteristics of the current primary dental care workforce (dentists, hygienists, assistants), its distribution, and its delivery system in private and public sectors. Graduate dental school enrollments, trends in patient visits, employment patterns, state dental activities, and workforce issues related to health care…
Bader, James D.
Current conditions in dental hygiene influencing professional education are discussed. Workplace/practice issues include dental hygiene care as a component of dental practice, content, effects, and quality of care, hygienist supply and demand, and job satisfaction. Professional issues include the knowledge base, definitions of practice, and…
... qualify for VHA dental treatment, including any claim for treatment of periodontal disease or calculus... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 3 RIN 2900-AN28 Dental Conditions AGENCY: Department of... its adjudication regulations regarding service connection of dental conditions for treatment purposes...
... Physician Resources Professions Site Index A-Z Panoramic Dental X-ray Panoramic dental x-ray uses a very small dose of ... x-ray , is a two-dimensional (2-D) dental x-ray examination that captures the entire mouth ...
... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 3 RIN 2900-AN28 Dental Conditions AGENCY: Department of... rule the proposal to amend its adjudication regulations regarding service connection of dental... Veterans Benefits Administration (VBA) for service connection of dental conditions for the purpose of...
Nash, David A; Friedman, Jay W; Kardos, Thomas B; Kardos, Rosemary L; Schwarz, Eli; Satur, Julie; Berg, Darren G; Nasruddin, Jaafar; Mumghamba, Elifuraha G; Davenport, Elizabeth S; Nagel, Ron
In 1921, New Zealand began training school dental nurses, subsequently deploying them throughout the country in school-based clinics providing basic dental care for children. The concept of training dental nurses, later to be designated dental therapists, was adopted by other countries as a means of improving access to care, particularly for children. This paper profiles six countries that utilise dental therapists, with a description of the training that therapists receive in these countries, and the context in which they practice. Based on available demographic information, it also updates the number of dental therapists practising globally, as well as the countries in which they practice. In several countries, dental therapy is now being integrated with dental hygiene in training and practice to create a new type of professional complementary to a dentist. Increasingly, dental therapists are permitted to treat adults as well as children. The paper also describes the status of a current initiative to introduce dental therapy to the United States. It concludes by suggesting that dental therapists can become valued members of the dental team throughout the world, helping to improve access to care and reducing existing disparities in oral health.
Murakami, Shumei; Verdonschot, Rinus G; Kreiborg, Sven
The aim of this study was to investigate whether stereoscopy can play a meaningful role in dental education. The study used an anaglyph technique in which two images were presented separately to the left and right eyes (using red/cyan filters), which, combined in the brain, give enhanced depth...... perception. A positional judgment task was performed to assess whether the use of stereoscopy would enhance depth perception among dental students at Osaka University in Japan. Subsequently, the optimum angle was evaluated to obtain maximum ability to discriminate among complex anatomical structures. Finally...... practice, they did recognize its merits for education. These results suggest that using stereoscopic images in dental education can be quite valuable as stereoscopy greatly helped these students' understanding of the spatial relationships in complex anatomical structures....
Costa, Tamara Goularte
The objective of this research is to demonstrate the risks and consequences of exposure to dental X-ray. The methodology used was the survey of bibliographic literature on this matter. First, we tried to understand the operation and characteristics of dental X-rays. Afterwards, we tried to know about the risks that this procedure offers to workers and patients. And concluded with the consequences of such exposure. The results showed that dental x-rays only offer risks in prolonged exposure, can affect the worker or patient to pathologies such as cancer or a life-time decreased due to the stochastic effect. Therefore, radiological protection standards must be respected and practised. (author)
A high number of patients have one or more missing tooth and it is estimated that one in four American subjects over the age of 74 have lost all their natural teeth. Many options exist to replace missing teeth but dental implants have become one of the most used biomaterial to replace one (or more) missing tooth over the last decades. Contemporary dental implants made with titanium have been proven safe and effective in large series of patients. This review considers the main historical facts concerned with dental implants and present the different critical factors that will ensure a good osseo-integration that will ensure a stable prosthesis anchorage. Copyright © 2016 Elsevier Masson SAS. All rights reserved.
Lebon, Nicolas; Tapie, Laurent; Duret, Francois; Attal, Jean-Pierre
Nowadays, dental numerical controlled (NC) milling machines are available for dental laboratories (labside solution) and dental production centers. This article provides a mechanical engineering approach to NC milling machines to help dental technicians understand the involvement of technology in digital dentistry practice. The technical and economic criteria are described for four labside and two production center dental NC milling machines available on the market. The technical criteria are focused on the capacities of the embedded technologies of milling machines to mill prosthetic materials and various restoration shapes. The economic criteria are focused on investment cost and interoperability with third-party software. The clinical relevance of the technology is discussed through the accuracy and integrity of the restoration. It can be asserted that dental production center milling machines offer a wider range of materials and types of restoration shapes than labside solutions, while labside solutions offer a wider range than chairside solutions. The accuracy and integrity of restorations may be improved as a function of the embedded technologies provided. However, the more complex the technical solutions available, the more skilled the user must be. Investment cost and interoperability with third-party software increase according to the quality of the embedded technologies implemented. Each private dental practice may decide which fabrication option to use depending on the scope of the practice.
The invention relates to a therapeutic method for preventing and/or inhibiting dental erosion in a mammalian subject, and the provision of a dental care product for performing the method. The dental care product of the invention comprises a starch-degrading enzyme of E. C. 22.214.171.124, wherein said...... product comprises less than 1 wt.% ionic surfactant, and preferably is substantially free of endoprotease and/or lipase. The properties of the dental care product serve to prevent and/or inhibit dental erosion in a subject that typically results from repeated exposure of the patient's tooth surfaces...
Rubberloid Van R Dental Prod. Surgident Lactona Corp. Alginates Coe Alginate Coe Labs o Jeltrate L.D. Caulk Kerr Alginate Kerr/Sybron Alginate S.S. White Co...Surgident- Alginate Lactona Corp. Unijel II Unitek Corp. O Combination Agar/a ig inate Colloid 80 U.S. Shiza Corp. Dentloid Denterials, Ltd...66061 (215) 277-3800 (913) 782-2200 Shofu Dental Corp. Lactona Corp. (subsidary of 4025 Bohannon Dr. Warner-Lambert Co.) Menlo Park, CA 94025 . Academy
Andreasen, Jens Ove; Lauridsen, Eva Fejerskov; Christensen, Søren Steno Ahrensburg
Diagnose and treatment of traumatic dental injuries is very complex due to the multiple trauma entities represented by 6 lunation types and 9 fracture types affecting both the primary and the permanent dentition. When it is further considered that fracture and lunation injuries are often combined...... problems in selecting proper treatment for some of these trauma types. To remedy this situation, an internet based knowledge base consisting of 4000 dental trauma cases with long term follow up is now available to the public and professionals, on the internet using the address www...
Jing, Chen; Lei, Cheng; Xuedong, Zhou; Xian, Peng
Dental caries is the most common chronic infectious disease of the oral cavity. The bacterium Streptococcus mutans is the sole pathogen that causes this disease. However, substantial evidence suggests that prevention and treatment strategies developed from traditional "cariogenic pathogen theory" are inefficient in reducing the prevalence of dental caries. An increasing number of individuals adopt the ecological view of the microbiota in the pathogenesis of dental caries. Recent technological improvements have enabled the detection and analysis of oral microorganisms, and many studies have focused on this area. The core microbiota is defined as a cluster of microbes playing critical roles in the initial and development phases of dental caries and may provide future direction for microorganism-related etiological studies.
Reinders, Jan J.; Krijnen, Wim P.; Stegenga, Boudewijn; van der Schans, Cees P.
Attitudes of dental students regarding the provision of treatment tend to be dentist-centered; however, facilitating mixed student group formation could change such perceptions. The aim of this study was to investigate the perceived scope of practice of dental and dental hygiene students and whether
Reinders, Jan J; Krijnen, Wim P; Stegenga, Boudewijn; van der Schans, Cees P
Attitudes of dental students regarding the provision of treatment tend to be dentist-centered; however, facilitating mixed student group formation could change such perceptions. The aim of this study was to investigate the perceived scope of practice of dental and dental hygiene students and whether
Azodo, Clement C; Ehizele, Adebola O; Umoh, Agnes; Ojehanon, Patrick I; Akhionbare, Osagie; Okechukwu, Robinson; Igbinosa, Lawrence
To determine the perceived oral health status and treatment needs of Nigerian dental therapists in training and dental technology students. A descriptive cross-sectional study of students from Federal School of Dental Therapy and Technology Enugu, Nigeria was conducted using self-administered questionnaire to obtain information on demography, self-reported oral health status, knowledge of impact of oral health on daily life activity, dental attendance and perceived dental need. The perception of oral health status and treatment need of the two groups of dental auxiliaries was the same. Fewer respondents (27.3%) rated their oral health as excellent, while 50.4% rated their oral health as good. Majority (95.5%) agreed that oral health is a part of general health and 94.6% agreed that oral health has a role in daily life. Out of 81.4% that had previous dental treatment, scaling and polishing accounted for 66.1%. Presently, 48.8% think they need dental treatment ranging from scaling and polishing (33.9%), tooth restoration (10.3%), to extraction (1.2%). This survey revealed that most of the students are aware that oral health is a component of general health and that it has an impact on an individual's daily life. More than half of the students perceived their oral health as good, but only a few knew that there is a need for a preventive approach to oral health as evident by the percentage that perceived scaling and polishing as a treatment need.
Clement C. Azodo
Full Text Available Objective: To determine the perceived oral health status and treatment needs of Nigerian dental therapists in training and dental technology students. Methods: A descriptive cross-sectional study of students from Federal School of Dental Therapy and Technology Enugu, Nigeria was conducted using self-administered questionnaire to obtain information on demography, self-reported oral health status, knowledge of impact of oral health on daily life activity, dental attendance and perceived dental need. Results: The perception of oral health status and treatment need of the two groups of dental auxiliaries was the same. Fewer respondents (27.3% rated their oral health as excellent, while 50.4% rated their oral health as good. Majority (95.5% agreed that oral health is a part of general health and 94.6% agreed that oral health has a role in daily life.Out of 81.4% that had previous dental treatment, scaling and polishing accounted for 66.1%. Presently, 48.8% think they need dental treatment ranging from scaling and polishing (33.9%, tooth restoration (10.3%, to extraction (1.2%. Conclusion: This survey revealed that most of the students are aware that oral health is a component of general health and that it has an impact on an individual's daily life. More than half of the students perceived their oral health as good, but only a few knew that there is a need for a preventive approach to oral health as evident by the percentage that perceived scaling and polishing as a treatment need.
Shoffstall-Cone, Sarah; Williard, Mary
In 1999, An Oral Health Survey of American Indian and Alaska Native (AI/AN) Dental Patients found that 79% of 2- to 5-year-olds had a history of tooth decay. The Alaska Native Tribal Health Consortium in collaboration with Alaska's Tribal Health Organizations (THO) developed a new and diverse dental workforce model to address AI/AN oral health disparities. This paper describes the workforce model and some experience to date of the Dental Health Aide (DHA) Initiative that was introduced under the federally sanctioned Community Health Aide Program in Alaska. These new dental team members work with THO dentists and hygienists to provide education, prevention and basic restorative services in a culturally appropriate manner. The DHA Initiative introduced 4 new dental provider types to Alaska: the Primary Dental Health Aide, the Expanded Function Dental Health Aide, the Dental Health Aide Hygienist and the Dental Health Aide Therapist. The scope of practice between the 4 different DHA providers varies vastly along with the required training and education requirements. DHAs are certified, not licensed, providers. Recertification occurs every 2 years and requires the completion of 24 hours of continuing education and continual competency evaluation. Dental Health Aides provide evidence-based prevention programs and dental care that improve access to oral health care and help address well-documented oral health disparities.
Full Text Available Background. In 1999, An Oral Health Survey of American Indian and Alaska Native (AI/AN Dental Patients found that 79% of 2- to 5-year-olds had a history of tooth decay. The Alaska Native Tribal Health Consortium in collaboration with Alaska’s Tribal Health Organizations (THO developed a new and diverse dental workforce model to address AI/AN oral health disparities. Objectives. This paper describes the workforce model and some experience to date of the Dental Health Aide (DHA Initiative that was introduced under the federally sanctioned Community Health Aide Program in Alaska. These new dental team members work with THO dentists and hygienists to provide education, prevention and basic restorative services in a culturally appropriate manner. Results. The DHA Initiative introduced 4 new dental provider types to Alaska: the Primary Dental Health Aide, the Expanded Function Dental Health Aide, the Dental Health Aide Hygienist and the Dental Health Aide Therapist. The scope of practice between the 4 different DHA providers varies vastly along with the required training and education requirements. DHAs are certified, not licensed, providers. Recertification occurs every 2 years and requires the completion of 24 hours of continuing education and continual competency evaluation. Conclusions. Dental Health Aides provide evidence-based prevention programs and dental care that improve access to oral health care and help address well-documented oral health disparities.
Nelson, Travis M; Xu, Zheng
High levels of dental caries, challenging child behavior, and parent expectations support a need for sedation in pediatric dentistry. This paper reviews modern developments in pediatric sedation with a focus on implementing techniques to enhance success and patient safety. In recent years, sedation for dental procedures has been implicated in a disproportionate number of cases that resulted in death or permanent neurologic damage. The youngest children and those with more complicated medical backgrounds appear to be at greatest risk. To reduce complications, practitioners and regulatory bodies have supported a renewed focus on health care quality and safety. Implementation of high fidelity simulation training and improvements in patient monitoring, including end-tidal carbon dioxide, are becoming recognized as a new standard for sedated patients in dental offices and health care facilities. Safe and appropriate case selection and appropriate dosing for overweight children is also paramount. Oral sedation has been the mainstay of pediatric dental sedation; however, today practitioners are administering modern drugs in new ways with high levels of success. Employing contemporary transmucosal administration devices increases patient acceptance and sedation predictability. While recently there have been many positive developments in sedation technology, it is now thought that medications used in sedation and anesthesia may have adverse effects on the developing brain. The evidence for this is not definitive, but we suggest that practitioners recognize this developing area and counsel patients accordingly. Finally, there is a clear trend of increased use of ambulatory anesthesia services for pediatric dentistry. Today, parents and practitioners have become accustomed to children receiving general anesthesia in the outpatient setting. As a result of these changes, it is possible that dental providers will abandon the practice of personally administering large amounts of
Full Text Available Travis M Nelson, Zheng Xu Department of Pediatric Dentistry, University of Washington, Seattle, WA, USA Abstract: High levels of dental caries, challenging child behavior, and parent expectations support a need for sedation in pediatric dentistry. This paper reviews modern developments in pediatric sedation with a focus on implementing techniques to enhance success and patient safety. In recent years, sedation for dental procedures has been implicated in a disproportionate number of cases that resulted in death or permanent neurologic damage. The youngest children and those with more complicated medical backgrounds appear to be at greatest risk. To reduce complications, practitioners and regulatory bodies have supported a renewed focus on health care quality and safety. Implementation of high fidelity simulation training and improvements in patient monitoring, including end-tidal carbon dioxide, are becoming recognized as a new standard for sedated patients in dental offices and health care facilities. Safe and appropriate case selection and appropriate dosing for overweight children is also paramount. Oral sedation has been the mainstay of pediatric dental sedation; however, today practitioners are administering modern drugs in new ways with high levels of success. Employing contemporary transmucosal administration devices increases patient acceptance and sedation predictability. While recently there have been many positive developments in sedation technology, it is now thought that medications used in sedation and anesthesia may have adverse effects on the developing brain. The evidence for this is not definitive, but we suggest that practitioners recognize this developing area and counsel patients accordingly. Finally, there is a clear trend of increased use of ambulatory anesthesia services for pediatric dentistry. Today, parents and practitioners have become accustomed to children receiving general anesthesia in the outpatient setting. As a
Young, Lynda J.; Fellows, Avis L.
A study to determine differences between graduating and withdrawing students in the University of Minnesota Dental Hygiene program is discussed. The identification of differences may prove useful in the selection process for future classes through identification of students likely to complete their education. (MLW)
Zhang, Yu; Sailer, Irena; Lawn, Brian R
Clinical data on survival rates reveal that all-ceramic dental prostheses are susceptible to fracture from repetitive occlusal loading. The objective of this review is to examine the underlying mechanisms of fatigue in current and future dental ceramics. The nature of various fatigue modes is elucidated using fracture test data on ceramic layer specimens from the dental and biomechanics literature. Failure modes can change over a lifetime, depending on restoration geometry, loading conditions and material properties. Modes that operate in single-cycle loading may be dominated by alternative modes in multi-cycle loading. While post-mortem examination of failed prostheses can determine the sources of certain fractures, the evolution of these fractures en route to failure remains poorly understood. Whereas it is commonly held that loss of load-bearing capacity of dental ceramics in repetitive loading is attributable to chemically assisted 'slow crack growth' in the presence of water, we demonstrate the existence of more deleterious fatigue mechanisms, mechanical rather than chemical in nature. Neglecting to account for mechanical fatigue can lead to gross overestimates in predicted survival rates. Strategies for prolonging the clinical lifetimes of ceramic restorations are proposed based on a crack-containment philosophy. Copyright © 2013 Elsevier Ltd. All rights reserved.
Sanden, W.J.M. van der; Kreulen, C.M.; Berkhout, W.E.
The diagnostic use of oral radiology is an essential part of daily dental practice. Due to the potentially harmful nature of ionising radiation, the clinical use of oral radiology in the Netherlands is framed by clinical practice guidelines and regulatory requirements. Undergraduate students receive
... more impressions made of your mouth and remaining teeth. These impressions are used to make the crown — your realistic-looking artificial tooth. The crown can't be placed until your jawbone is strong ... and your dental specialist can choose artificial teeth that are either ...
de Baat, C.; van der Waal, I.; Jackson, S.H.D.; Jansen, P.A.F.; Mangoni, A.A.
Summary This chapter contains sections titled: • Introduction • Periodontal disease • Dental caries • Odontogenic infections • Alveolar osteitis • Xerostomia and hyposalivation • Candidiasis • Angular cheilitis • Denture stomatitis • Burning mouth syndrome • Recurrent aphthous stomatitis • Recurrent
... Health Resource Center Burmese (myanma bhasa) Expand Section Betel Nut - English PDF Betel Nut - myanma bhasa (Burmese) PDF Orange County North ... California Dental Association Karen (S’gaw Karen) Expand Section Betel Nut - English PDF Betel Nut - S’gaw Karen (Karen) ...
Porojan, Liliana; Topală, Florin
The aim of the study was to assess the effect of material stiffness and load on the biomechanical performance of the monolithic full-coverage posterior aesthetic dental crowns using finite element analysis. Three restorative materials for monolithic dental crowns were selected for the study: zirconia; lithium disilicate glass-ceramic, and resin-based composite. Stresses were calculated in the crowns for all materials and in the teeth structures, under different load values. The experiments show that dental crowns made from all this new aesthetic materials processed by CAD/CAM technologies would be indicated as monolithic dental crowns for posterior areas.
Kanegane, Kazue; Penha, Sibele S; Munhoz, Carolina D; Rocha, Rodney G
Dental anxiety is still prevalent, despite advances in treatment, and affects the utilization of health care services. The purpose of this cross-sectional study was to determine if patients with different degrees of dental anxiety and pain undergoing emergency dental care have different stress reactions as measured by salivary cortisol. Seventy three patients completed the modified dental anxiety scale (MDAS), and described any previous dental traumatic experience. Their socio-demographic characteristics were also recorded. They also rated pain intensity on a 100 mm visual analogue scale (VAS). A saliva sample was collected before the procedure, and analyzed by enzyme immunoassay. Thirty patients were dentally anxious and forty one complained of pain. In this sample, dental anxiety was not related to gender, age, educational level and family income; however, a previous traumatic event was related to dental anxiety. There was no association between salivary cortisol concentrations and gender or dental anxiety. Patients with pain showed higher cortisol levels. When gathering patient information, the dentist should note patients' negative dental experiences in order to provide more effective, less traumatic treatment.
Medina, Aida Carolina; Pozo, Rodrigo Del; de Cedres, Lucila Blanco
Dental agenesis is the most common developmental anomaly in humans, frequently associated with disorders in dental development and maturation. The purpose of this study is to determine radiographic variations in dental maturation in a group of Venezuelan children with dental agenesis. 1,188 panoramic radiographs, from healthy patients ages 5 to 12 years old were studied for agenesis of permanent teeth. Dental maturation was assessed by relative eruption and dental age according to Nolla, comparing children affected with dental agenesis to a stratified control group selected from the same population, excluding children with premature loss of primary teeth in the left quadrants and unclear radiographs. Descriptive analysis, and differences between means and medians (Student t test, Kruskall-Wallis p=0.05) were performed. Medians for Nolla stages were similar between groups, with delay in tooth formation in the agenesis group for second molars (p<0.05) and maxillary lateral incisors and second premolars. Dental age was significantly underestimated for both groups, -0.89 (±0.78) for the control group and -1.20 (±0.95) for the study group. Tooth eruption was similar between groups. Dental age was significantly delayed in Venezuelan children with dental agenesis, with variable significance for tooth formation of studied teeth.
Shiika, Yulia; Kruger, Estie; Tennant, Marc
Australia has a significant mal-distribution of its limited dental workforce. Outside the major capital cities, the distribution of accessible dental care is at best patchy. This study applied geo-spatial analysis technology to locate gaps in dental service accessibility for rural and remote dwelling Australians, in order to test the hypothesis that there are a few key location points in Australia where further dental services could make a significant contribution to ameliorating the immediate shortage crisis. A total of 2,086 dental practices were located in country areas, covering a combined catchment area of 1.84 million square kilometers, based on 50 km catchment zones around each clinic. Geo-spatial analysis technology was used to identify gaps in the accessibility of dental services for rural and remote dwelling Australians. An extraction of data was obtained to analyse the integrated geographically-aligned database. Results: Resolution of the lack of dental practices for 74 townships (of greater than 500 residents) across Australia could potentially address access for 104,000 people. An examination of the socio-economic mix found that the majority of the dental practices (84%) are located in areas classified as less disadvantaged. Output from the study provided a cohesive national map that has identified locations that could have health improvement via the targeting of dental services to that location. The study identified potential location sites for dental clinics, to address the current inequity in accessing dental services in rural and remote Australia.
... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental bur. 872.3240 Section 872.3240 Food and... DENTAL DEVICES Prosthetic Devices § 872.3240 Dental bur. (a) Identification. A dental bur is a rotary... materials intended for use in the fabrication of dental devices. (b) Classification. Class I (general...
... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental mercury. 872.3700 Section 872.3700 Food and... DENTAL DEVICES Prosthetic Devices § 872.3700 Dental mercury. (a) Identification. Dental mercury is a... dental cavity or a broken tooth. (b) Classification. Class I. ...
... FAQs Home › Medicaid › Benefits › Dental Care Dental Care Dental Care Related Resources Learn How to Report the ... services and opportunities and challenges to obtaining care. Dental Benefits for Children in Medicaid Medicaid covers dental ...
Atchison, Kathryn; Mascarenhas, Ana Karina; Bhoopathi, Vinodh
The curriculum for graduating dental and dental hygiene students must prepare them to contribute to the improvement or maintenance of health for individual patient's and the public's health. The objective is to describe the background for and the process used to develop a core Dental Public Health Curriculum for such students. The process used was to solicit and review existing dental public health curriculum in dental and dental hygiene schools; review curriculum for other health professionals; identify the themes needed to frame the curriculum; select usable materials and identify gaps in existing curricular materials; and develop appropriate curriculum materials that would embody the competencies developed for undergraduate dental and dental hygiene education. Twenty-three topics were identified as embodying the eight competencies. Based on these topics, six courses, Principles of Dental Public Health, Evidence-Based Dentistry, Ethics and Dental Public Health, Dental Public Health Policy and Advocacy, Oral Health Promotion and Disease Prevention, and Oral Health Literacy and Dental Public Health, were prepared. Each course includes syllabus, PowerPoint presentations, student assignments and activities, instructor guide, and classroom discussion points. Depending on the hours available in the existing curriculum at the dental or hygiene school, lecture presentations and take home assignments/discussions may be used independently or in combination with presentations from other courses. In addition, individual discussions and activities may be used to integrate dental public health materials into other courses. A flexible curriculum is available at the AAPHD website to enable the incorporation of DPH topics into the curriculum. © 2015 American Association of Public Health Dentistry.
Ofori, Marian A.; Adu-Ababio, F.; Nyako, E. A.; Ndanu, Tom A.
Objective: To find out the prevalence of dental anxiety and fear amongst patients in various selected dental clinics in Accra, Ghana. Study design: Dental patients (n = 279) who had either been exposed to dental treatments or had no prior dental exposure, attending four selected dental clinics in Accra were randomly sampled. They were interviewed…
Battrell, Ann; Lynch, Ann; Steinbach, Pam; Bessner, Sue; Snyder, Josh; Majeski, Jean
The changing health care environment and societal imperatives indicate the need for transformative change within the dental hygiene profession to serve the emerging needs of the public. The American Dental Hygienists' Association is leading the way toward meaningful change. The American Dental Hygienists' Association (ADHA) has as its vision the integration of dental hygienists into the health care delivery system as essential primary care providers to expand access to oral health care. This article provides data on current dental hygiene education programs and those in development. Also included is a discussion regarding how the dental hygiene profession can better serve the health and wellness needs of society by transforming the way graduates are prepared for the future. ADHA's dental hygiene survey center data, policies and a futuristic analysis plus a review of the professional literature describe the current state of dental hygiene education and the profession. A discussion of societal, health care and educational trends that creates the imperative for transformation of the dental hygiene profession is provided. Ultimately, the purpose of advancing education in dental hygiene is to achieve better oral and overall health for more people. The profession's responsibility to the public includes evaluating its own ability to provide care and taking the steps necessary to ensure its maximum effectiveness. ADHA is leading this process for dental hygienists in diverse ways. It is imperative that the dental hygiene profession understands and embraces the changing health care environment. Through open dialog and the sharing of evidence the professional path will be determined along with forward movement for the benefit of society and the dental hygiene profession. Copyright © 2014 Elsevier Inc. All rights reserved.
Sharan, Jitendra; Singh, Shivani; Lale, Shantanu V; Mishra, Monu; Koul, Veena; Kharbanda, P
Nanotechnology has revolutionized health care industry in a large scale and its applications are a boon to modern medicine and dental science. It is expected to pervade and further revolutionize the art and science of dentistry and may well have important applications spanning all the aspects of oral diseases, diagnosis, prevention and treatment. Materials science in dentistry has embraced the technology to produce nanomaterials that are being used in caries inhibitors, antimicrobial resins, hard tissue remineralizing agents, targeted drug delivery, scaffolds, bio-membranes, nanocrystalline hydroxyl apatite, restorative cements, adhesion promoters and boosters, bioactive glass, tissue conditioners, reinforced methacrylate resins, root canal disinfectants, friction free orthodontic arch wires and nano composites life. These upcoming technologies have potential to bring about significant benefits in the form of improvement in dental science and to society. The present review presents the latest recent developments in this interdisciplinary field bridging nanotechnology and dental science.
Fontana, Margherita; González-Cabezas, Carlos; de Peralta, Tracy; Johnsen, David C
To be able to meet the demands for care in 2040, dental graduates will need to address challenges resulting from the rapidly changing health care environment with knowledge and sets of skills to build on current standards and adapt to the future. The purposes of this article are to 1) analyze key challenges likely to evolve considerably between now and 2040 that will impact dental education and practice and 2) propose several sets of skills and educational outcomes necessary to address these challenges. The challenges discussed include changes in prevalence of oral diseases, dental practice patterns, materials and technologies, integrated medical-dental care, role of electronic health records, cultural competence, integrated curricula, interprofessional education, specialty-general balance, and web/cloud-based collaborations. To meet these challenges, the dental graduate will need skills such as core knowledge in basic and clinical dentistry, technical proficiency, critical thinking skills for lifelong learning, ethical and professional values, ability to manage a practice, social responsibility, and ability to function in a collegial intra- and interprofessional setting. Beyond the skills of the individual dentist will be the need for leadership in academia and the practice community. Academic and professional leaders will need to engage key constituencies to develop strategic directions and agendas with all parties pointed toward high standards for individual patients and the public at large. This article was written as part of the project "Advancing Dental Education in the 21 st Century."
Yub Kwon, T.; Oh, D.S.; Narayanan, R.
Welcome to this special issue. Nano science and nano technology concepts are applicable across all fields of science and a more widespread application of nano materials and nano technologies is imminent or already occurring in many areas, including health care. Today is scientists take those cutting-edge technologies and concepts and apply them to medicine and dentistry. They are finding a wide variety of ways to make medical and dental materials at the nano scale to take advantage of their enhanced physical and biological properties.The purpose of this special issue is to publish high-quality research papers as well as review articles addressing recent advances in the field of nano materials for medical and dental applications. A particular interest is given to papers exploring or discussing nano materials and nano technologies related to delivery system, bonding substitutes, and surface modification techniques applicable in these areas. For this special issue, several investigators were invited to contribute original research findings that can stimulate continuing efforts to understand the cutting-edge applications of nano materials in medicine and dentistry.
... Diabetes, Sexual, & Bladder Problems Diabetes, Gum Disease, & Other Dental Problems How can diabetes affect my mouth? Too ... What if my mouth is sore after my dental work? A sore mouth is common after dental ...
... Living Listen Español Text Size Email Print Share Dental Health & Hygiene for Young Children Page Content Article ... and lead to future dental problems. Teaching Good Dental Habits The best way to protect your child's ...
Rajesh Mahant; S Vineet Agrawal; Sonali Kapoor; Isha Agrawal
Since ages, human beings suffer from the dental problems. With the journey as time elapsed the person treating the teeth changed (i.e., from barbers and monks to present dentists), equipment changed (i.e., from bow drills to airotor and laser handpieces), materials changed (i.e., from ground mastic alum/honey to tooth colored composite and ceramics). There has been drastic change in treatment planning from extraction to the conservation of teeth and from manual restoration to computerized res...
Lucas Quaresemin de Oliveira
Full Text Available The application of ergonomics is critical so that you can get a suitable working environment for professional, it is safe, healthy and comfortable. The objective was to identify whether the dental students followed the principles of ergonomics during clinical visits, evaluating, through photographs, compliance with ergonomic principles applied in dental practice, and finally identify the most affected sites by RSI / WMSDs of students enrolled in the dental clinic of the Faculdade IMED. Snapshots were made and only considered the position of the student operator, the same taken by the researcher using the mobile device. For each clinical procedure were taken two photographs in hidden angles to the student operator so that it did not change its ergonomic position to be observed. After obtaining the photos, they were evaluated and classified in scores from 0 to 3 according to the adequacy of the work placement, and then inserted into Excel and later in a database (SPSS 15.0. The following work is a cross-sectional, observational study, they were conducted in dental clinics IMED college. Among the 66 respondents, 14 were male and 52 female. It was found that 57 (86,3% reported feeling pain somewhere in the body, being the most affected sites neck (36.4%, and consecutively lower back (30.3% and higher than the back (27.3%. The results of the 63 procedures performed by the photographic shots were classified as “inadequate” in 49 procedures, “partially adequate” in 12 and “impossible to evaluate” in 2 procedures. The research results have shown a high prevalence of musculoskeletal pain and do not follow the ergonomic principles, emphasizing the need for more attention to ergonomics of the students.
Rinchuse, D J; Rinchuse, D J; Deluzio, C
A checklist for verification of unethical business practices, originally formulated by Drs. Blanchard and Peale, is adapted to dental practice. A scenario is used as a model to demonstrate the applicability of this instrument to dental practice. The instrument asks three questions in regards to an ethical dilemma: 1) Is it legal? 2) Is it fair? 3) How does it make you feel? The paper concludes the giving of gifts to general dentists by dental specialists for the referral of patients is unethical.
Masella, Richard S
Shibboleths are common expressions presented as indisputable truths. When used in educational discussions, they reflect "motherhood and apple pie" viewpoints and tend to bring debate to a halt. Use of shibboleths may precede a desired imposition of "locksteps" in educational programming and are easily perceived as paternalistic by recipients. Nine shibboleths are presented as common beliefs of dental faculty and administrators. Evidence contradicting the veracity of the "obvious truths" is offered. The traditional "splendid isolation" of dentistry contributes to parochialism and belief in false shibboleths. Sound principles of higher and health professions education, student learning, and dental practice apply to dental education as to all health disciplines. Student passivity in dental education is not the best preparation for proficiency in dental practice. The master teacher possesses a repertoire of methodologies specific to meeting defined educational objectives. Active learning experiences bear close resemblances to professional duties and responsibilities and internally motivate future doctors of dental medicine. The difficulty in achieving curricular change leads to curricular entrenchment. Dentistry and dental education should not trade their ethical high ground for the relatively low ethical standards of the business world. Principles of professional ethics should govern relationships between dentists, whether within the dental school workplace or in practice. Suggestions are made on how to confront shibboleths in dental school settings.
Morgan, Annie G; Rodd, Helen D; Porritt, Jenny M; Baker, Sarah R; Creswell, Cathy; Newton, Tim; Williams, Chris; Marshman, Zoe
Dental anxiety is common among children. Although there is a wealth of research investigating childhood dental anxiety, little consideration has been given to the child's perspective. This qualitative study sought to explore with children their own experiences of dental anxiety using a cognitive behavioural therapy assessment model. Face-to-face, semi-structured interviews were conducted with dentally anxious children aged 11-16 years. The Five Areas model was used to inform the topic guide and analysis. Data were analysed using a framework approach. In total, 13 children were interviewed. Participants described their experiences of dental anxiety across multiple dimensions (situational factors and altered thoughts, feelings, physical symptoms, and behaviours). Participants placed considerable value on communication by dental professionals, with poor communication having a negative influence on dental anxiety and the dentist-patient relationship. This study confirms the Five Areas model as an applicable theoretical model for the assessment of childhood dental anxiety. Children provided insights about their own dental anxiety experiences that have not previously been described. © 2016 BSPD, IAPD and John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Wilson, M H
Serious medical emergencies are fortunately a rare occurrence in the dental practice environment; however, if an emergency situation is encountered a delay in treatment may result in potentially avoidable consequences. The risk of mortality or serious morbidity can be reduced by ensuring that basic emergency equipment and medications are in place, and that the dental team is appropriately trained in basic life support measures. This article aims to provide an overview of the basic emergency medications and equipment that should be present in dental practices, and to discuss specific responses to some of the more common adverse medical events that can present while providing dental treatment.
Most dental pain is caused by an organic problem such as dental caries, periodontitis, pulpitis, or trauma. Diagnosis and treatment of these symptoms are relatively straightforward. However, patients often also complain of abnormal dental pain that has a non-dental origin, whose diagnosis is challenging. Such abnormal dental pain can be categorized on the basis of its cause as referred pain, neuromodulatory pain, and neuropathic pain. When it is difficult to diagnose a patient's dental pain, ...
Prosthetic rehabilitation with an implant-supported fixed prosthesis using computer-aided design and computer-aided manufacturing dental technology for a patient with a mandibulectomy: A clinical report.
Yoon, Hyung-In; Han, Jung-Suk
The fabrication of dental prostheses with computer-aided design and computer-aided manufacturing shows acceptable marginal fits and favorable treatment outcomes. This clinical report describes the management of a patient who had undergone a mandibulectomy and received an implant-supported fixed prosthesis by using additive manufacturing for the framework and subtractive manufacturing for the monolithic zirconia restorations. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.
Cameron, Cheryl A.; And Others
Dental and dental hygiene faculty should maintain their clinical skills through regular practice, to improve their ability to relate to students through instruction, provide an additional source of income, and improve their image in the community. Institutional policies fostering and regulating faculty practice plans are suggested. (Author/MSE)
Information on dental caries among patients attending Mulago Hospital is scarce. Yet knowledge of the pattern of caries can be used to plan preventive and treatment interventions. This study describes the pattern of dental caries (in terms of age group, tooth and tooth surface and gender) among patients attending the ...
Sweden initiated a dental health care insurance in 1973. The health insurance is outlined, current problems and political issues are described. The benefits and limitations are described.......Sweden initiated a dental health care insurance in 1973. The health insurance is outlined, current problems and political issues are described. The benefits and limitations are described....
New York State Education Dept., Albany. Office of the Professions.
The handbook contains laws, rules, and regulations of the New York State Education Department that govern dentistry and dental hygiene practice in the state. It describes licensure requirements and includes complete application forms and instructions for obtaining license and first registration as a dentist and dental hygienist. Applicants are…
Apfel, Maura; Weaver, Trudy Karlene
This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: local anesthesia; dental office emergencies; oral hygiene;…
Argyraki, A.; Ou, Yiyu; Petersen, Paul Michael
Visible and ultraviolet LEDs will in the future give rise to new dental applications. Fluorescence imaging, photodynamic therapy and photoactivated disinfection are important future candidates for diagnostics and treatment in dentistry.......Visible and ultraviolet LEDs will in the future give rise to new dental applications. Fluorescence imaging, photodynamic therapy and photoactivated disinfection are important future candidates for diagnostics and treatment in dentistry....
Jan 1, 2010 ... Oral diseases qualify as a major public health concern owing to their high prevalence and incidence in all regions of the world (1). Dental caries and gingivitis are the two most common dental diseases affecting children worldwide. These two diseases are, to a large extent, the result of the presence of ...
This study examines results of a practical drawing task given to a cohort of first year dental surgery students at Kings College Dental Institute, London. It compares and relates their success in drilling and removing caries and pulp tissue from a virtual tooth using the hapTEL virtual learning system, with each individuals' drawing skills.…
Bradt, J; Teague, A
Anxiety is a significant issue in the dental care of adults and children. Dental anxiety often leads to avoidance of dental care which may result in significant deterioration of oral and dental health. Non-pharmacological anxiety management interventions such as music listening are increasingly used in dental care. Although efficacy for music's anxiolytic effects has been established for pre-operative anxiety, findings regarding the use of music listening for dental anxiety are inconclusive, especially for children. The use of music for passive distraction may not be adequate for children and highly anxious adults. Instead, interventions offered by a trained music therapist may be needed to optimize music's anxiolytic impact. Music therapy interventions are individualized to the patient's presenting needs and geared at enhancing patients' active engagement in the management of their anxiety. Interventions may include (i) active refocusing of attention, (ii) music-guided deep breathing, (iii) music-assisted relaxation, and (iv) music-guided imagery. In addition, music therapists can teach patients music-based anxiety management skills prior to dental treatments, offer them the opportunity to express emotions related to the upcoming procedure, and help them gain a sense of control and safety. Clinical guidelines for the use of music listening by dental practitioners are offered. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
The importance of the introduction of dental implants can only be understood when the historical context is clarified. In the past, the main treatment carried out by dentists consisted of filling or, in unfortunate cases, removal of painful teeth. Only since the introduction of dental implants did
Shearston, Jenni A; Shah, Krina; Cheng, Eric; Moosvi, Rizvan; Park, Su Hyun; Patel, Naiya; Spielman, Andrew I; Weitzman, Michael L
Using cigarettes and alternative tobacco products (ATPs) is associated with negative oral health outcomes, and dental health professionals are poised to help patients quit. The aim of this study was to determine dental, dental hygiene, and advanced dental students' use, knowledge, and beliefs about cigarettes and ATPs, including perceptions about their education in tobacco dependence treatment and counseling experience. All 1,783 students enrolled in the dental, dental hygiene, and postdoctoral dental programs at the New York University College of Dentistry were invited to participate in the survey in 2016. A total of 708 students at least partially completed the survey, for a response rate of 39.7%. In the results, 146 of the students (20.1%) reported ever using cigarettes, while 253 (35.7%) reported ever using any ATP. Regarding tobacco use intervention, the students reported they had not received enough training on ATPs, were neutral about cigarettes, and were somewhat confident and not so confident counseling a cigarette smoker or ATP user, respectively. By their fourth year, 77.8% of the dental students reported they had counseled someone to stop smoking cigarettes, but only 40.7% had counseled someone to stop using ATPs. Overall, all groups of students reported feeling more confident and had received more education on interventions for cigarettes than for ATPs (ptobacco and did not perceive they had received enough training on intervening with patients on use of cigarettes and ATPs. These findings call for a revised tobacco education curriculum for dental, dental hygiene, and advanced dental students, focused on building knowledge and confidence for promoting tobacco dependence treatment.
Grytten, J; Sørensen, R
Dental services for adults are different from all other Norwegian health services in that they are provided by private producers (dentists) who have full freedom to establish a practice. They have had this freedom since the end of World War II. A further liberalization of the market for dental services occurred in November 1995, when the so-called normal tariff was repealed. The system changed from a fixed fee system to a deregulated fee system. In principle, the market for dental services for adults operates as a free competitive market, in which dentists must compete for a market share. The aim of this study was to study the short-term effects of competition. A comprehensive set of data on fees, practice characteristics, treatment profiles and factors that dentists take into account when determining fees was analysed. The main finding was that competition has a weak effect. No support was found for the theory that the level of fees is the result of monopolistic competition or monopoly. The results also provided some evidence against the inducement hypothesis. At this stage, it is interesting to notice that dentists do not seem to exploit the power they have to control the market. One explanation, which is consistent with the more recent literature, is that physicians' behaviour to a large extent is influenced by professional norms and caring concerns about their patients. Financial incentives are important, but these incentives are constrained by norms other than self-interest. The interpretation of the results should also take into account that the deregulation has operated for a short time and that dentists and patients may not yet have adjusted to changes in the characteristics of the market. Copyright 2000 John Wiley & Sons, Ltd.
Tomsia, Antoni P; Lee, Janice S; Wegst, Ulrike G K; Saiz, Eduardo
With the advent of nanotechnology, an opportunity exists for the engineering of new dental implant materials. Metallic dental implants have been successfully used for decades, but they have shortcomings related to osseointegration and mechanical properties that do not match those of bone. Absent the development of an entirely new class of materials, faster osseointegration of currently available dental implants can be accomplished by various surface modifications. To date, there is no consensus regarding the preferred method(s) of implant surface modification, and further development will be required before the ideal implant surface can be created, let alone become available for clinical use. Current approaches can generally be categorized into three areas: ceramic coatings, surface functionalization, and patterning on the micro- to nanoscale. The distinctions among these are imprecise, as some or all of these approaches can be combined to improve in vivo implant performance. These surface improvements have resulted in durable implants with a high percentage of success and long-term function. Nanotechnology has provided another set of opportunities for the manipulation of implant surfaces in its capacity to mimic the surface topography formed by extracellular matrix components of natural tissue. The possibilities introduced by nanotechnology now permit the tailoring of implant chemistry and structure with an unprecedented degree of control. For the first time, tools are available that can be used to manipulate the physicochemical environment and monitor key cellular events at the molecular level. These new tools and capabilities will result in faster bone formation, reduced healing time, and rapid recovery to function.
The American Dental Dream-the cultural desire for straight, white teeth-is difficult, if not impossible, for poor and working-class people to achieve. Using ethnographic fiction, autoethnography, poetry, and qualitative interviewing, I brush away the taken-for-granted assumptions about teeth. I explore the personal, relational, and structural consequences of this cultural desire, and show how social class writes itself on our bodies. I write these culture-centered teeth tales to show how one might cope with their teeth.
Two main classes of material are involved, the glass-ionomer cements and the composite resins. This investigation describes the way they are bonded to the tooth and highlights their differences. Glass ionomers develop a zone of interaction with the tooth as they age which ultimately gives an extremely strong bond, and results in excellent retention rates. By contrast, bonding of composite resins is more complicated and possibly less effective, though these materials have better wear resistance and better aesthetics than glass ionomers. Assessment of bond durability is difficult. This is because a dental restorative can fail by a number of mechanisms apart from de bonding: for example, through wear or fracture
Hong, Do Gia Khang; Oh, Ji-Hyeon
Dental implants are a common treatment for the loss of teeth. This paper summarizes current knowledge on implant surfaces, immediate loading versus conventional loading, short implants, sinus lifting, and custom implants using three-dimensional printing. Most of the implant surface modifications showed good osseointegration results. Regarding biomolecular coatings, which have been recently developed and studied, good results were observed in animal experiments. Immediate loading had similar clinical outcomes compared to conventional loading and can be used as a successful treatment because it has the advantage of reducing treatment times and providing early function and aesthetics. Short implants showed similar clinical outcomes compared to standard implants. A variety of sinus augmentation techniques, grafting materials, and alternative techniques, such as tilted implants, zygomatic implants, and short implants, can be used. With the development of new technologies in three-dimension and computer-aided design/computer-aided manufacturing (CAD/CAM) customized implants can be used as an alternative to conventional implant designs. However, there are limitations due to the lack of long-term studies or clinical studies. A long-term clinical trial and a more predictive study are needed.
Threlfall, A G; King, D; Milsom, K M; Blinkhom, A S; Tickle, M
Policy has recently changed on provision of dental general anaesthetic services in England. The aim of this study was to investigate general dental practitioners' views about dental general anaesthetics, the reduction in its availability and the impact on care of children with toothache. Qualitative study using semi-structured interviews and clinical case scenarios. General dental practitioners providing NHS services in the North West of England. 93 general dental practitioners were interviewed and 91 answered a clinical case scenario about the care they would provide for a 7-year-old child with multiple decayed teeth presenting with toothache. Scenario responses showed variation; 8% would immediately refer for general anaesthesia, 25% would initially prescribe antibiotics, but the majority would attempt to either restore or extract the tooth causing pain. Interview responses also demonstrated variation in care, however most dentists agree general anaesthesia has a role for nervous children but only refer as a last resort. The responses indicated an increase in inequalities, and that access to services did not match population needs, leaving some children waiting in pain. Most general dental practitioners support moving dental general anaesthesia into hospitals but some believe that it has widened health inequalities and there is also a problem associated with variation in treatment provision. Additional general anaesthetic services in some areas with high levels of tooth decay are needed and evidence based guidelines about caring for children with toothache are required.
The incorporation of technological advancements in higher education has started to bridge the gap in local, national and global delivery of dental courses. This gap, including the global decrease in senior clinical academics, has influenced the development of new teaching and learning techniques. Institutional virtual learning environments (VLE) and other e-learning resources are now in higher demand. This paper describes how one such innovative solutions has been IVIDENT (International Virtual Dental School), has enabled secure and seamless access to high quality e-content and tools through an innovative, universal flexible learning platform. IVIDENT, now UDENTE (Universal Dental E-learning) has been shown to offer new learning experiences for students of dentistry, but its approach can apply across all educational domains. UDENTE also benefits staff as it allows them to contribute and access resources through peer reviewed publishing processes, which ensure the highest quality in education. UDENTE was developed thanks to a £2.3 million grant from the Higher Education Funding Council for England (HEFCE) and the Department of Health. http://www.udente.org. This academically led educational research project involved dental schools in seven countries. An initially scoping of requirements was followed by elaboration of the tools needed. Pilot testing of the tools, systems and learning resources in particular and the impact of the UDENTE in general were carried out. The pilots revealed evidence of positive impact of a space for learning, teaching, development and communication, with tools for planning of electives and administrative support. The results of these initial pilots have been positive and encouraging, describing UDENTE as an accessible, user friendly platform providing tools that otherwise would be difficult to access in a single space. However, attention to supporting faculty to embrace these new learning domains is essential if such technology enhanced
Al-Rawi, Wisam; Easterling, Lauren; Edwards, Paul C
Combining active recall testing with spaced repetition increases memory retention. The aim of this study was to evaluate and compare students' perception and utilization of an electronic spaced repetition oral pathology-radiology system in dental hygiene education and predoctoral dental education. The study employed an open-source suite of applications to create electronic "flashcards" that can be individually adjusted for frequency of repetition, depending on a user's assessment of difficulty. Accessible across multiple platforms (iOS, Android, Linux, OSX, Windows) as well as via any web-based browser, this framework was used to develop an oral radiology-oral pathology database of case-based questions. This system was introduced in two courses: sophomore oral pathology for dental students and sophomore radiology for dental hygiene students. Students were provided free software and/or mobile tablet devices as well as a database of 300 electronic question cards. Study participants were surveyed on frequency and extent of use. Perception-based surveys were used to evaluate their attitudes towards this technology. Of the eligible students, 12 of 22 (54.5%) dental hygiene and 49 of 107 (45.8%) dental students responded to the surveys. Adoption rates and student feedback were compared between the two groups. Among the respondents, acceptance of this technology with respect to educational usefulness was similar for the dental and dental hygiene students (median=5 on a five-point scale; dental hygiene interquartile range (IQR)=0; dental IQR=1). Only a minority of the survey respondents (25% dental, 33% dental hygiene) took advantage of one of the main benefits of this technology: automated spaced repetition.
The thesis deals with integrated dental care in nursing homes. First, the dental treatment needs were ascertained of 432 residents in three Dutch nursing homes that offer integrated dental care. Dentist researchers intra-orally examined the residents and found that 72% required dental treatment.
Asserts that parent education is vital to good dental hygiene for the whole family. Discusses what Head Start staffers can do to ensure that children's dental needs are being met, particularly in assisting parents with taking responsibility for children's dental hygiene. Covers dental care tips for parents, questions and answers about dental…
Casaglia, A; DE Dominicis, P; Arcuri, L; Gargari, M; Ottria, L
This paper is the first article in a new series on digital dental photography. Part 1 defines the aims and objectives of dental photography for examination, diagnosis and treatment planning, legal and forensic documentation, publishing, education, marketing and communication with patients, dental team members, colleagues and dental laboratory.
... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental floss. 872.6390 Section 872.6390 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6390 Dental floss. (a) Identification. Dental floss is a...
... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental cement. 872.3275 Section 872.3275 Food and... DENTAL DEVICES Prosthetic Devices § 872.3275 Dental cement. (a) Zinc oxide-eugenol—(1) Identification... filling or as a base cement to affix a temporary tooth filling, to affix dental devices such as crowns or...
Hermosillo, G G; López Cámara, V; Alvarez Manilla, J M; García Cantú, M; Silva Olivares, H
The introductory section describes the general situation of dental care in Mexico, analyzes the prevailing service model (including the kind of work done by the dental professional and the technology he employs), and briefly reviews the evolution of dentistry in the country. There follows an account of a series of new approaches to service and manpower training in experimental implementation since 1972 in the stomatology curriculum at the Xochimilco campus of the Metropolitan Autonomous University, at the National School of Professional Studies at Zaragoza, in the School of Dentistry of Nuevo León Autonomous University, Monterrey, and in the Dental Services at Ciudad Netzahualcóyotl. In each case, the background, characteristics, and objectives of the programs, and their evolution and prospects are described.
Ruse, N D; Sadoun, M J
Advances in digital impression technology and manufacturing processes have led to a dramatic paradigm shift in dentistry and to the widespread use of computer-aided design/computer-aided manufacturing (CAD/CAM) in the fabrication of indirect dental restorations. Research and development in materials suitable for CAD/CAM applications are currently the most active field in dental materials. Two classes of materials are used in the production of CAD/CAM restorations: glass-ceramics/ceramics and resin composites. While glass-ceramics/ceramics have overall superior mechanical and esthetic properties, resin-composite materials may offer significant advantages related to their machinability and intra-oral reparability. This review summarizes recent developments in resin-composite materials for CAD/CAM applications, focusing on both commercial and experimental materials. © International & American Associations for Dental Research.
Butler, M J [National Radiological Protection Board, Harwell (UK)
Dental radiographic techniques are summarized. The advantages and disadvantages of the use of both the conventional plastic pointer cone and the open-ended cylinders or divergent cones favoured both by the ICRP (Protection against Ionizing Radiation from External Sources, Oxford, Pergamon Press, 1973, ICRP Publication 15), and in the Code of Practice for the Protection of Persons against Ionizing Radiation arising from Medical and Dental Use (1972, 3rd edition, London, HMSO) are discussed. The use of the word 'should' in these recommendations to signify a desirable requirement, not an essential one, is noted. This wording is currently of interest both nationally and internationally in relation to regulations, standards and notes for guidance. The National Radiological Protection Board (NRPB) has been reviewing the position, and has concluded that open-ended cones have disadvantages which may sometimes outweigh their advantages. Although open-ended cones are preferable under some circumstances, the recommendation that they should be used ought not to be followed without an understanding of the issues involved. The hazards associated with the use of interchangeable cones are considered. The NRPB now proposes that the requirement for the replacement of pointer cones (for both new and existing equipment) should be withdrawn.
Stanford, C M
Dental implant surface technologies have been evolving rapidly to enhance a more rapid bone formation on their surface and hold a potential to increase the predictability of expedited implant therapy. While implant outcomes have become highly predictable, there are sites and conditions that result in elevated implant loss. This paper reviews the impact of macro-retentive features which includes approaches to surface oxide modification, thread design, press-fit and sintered-bead technologies to increase predictability of outcomes. Implant designs that lead to controlled lateral compression of the bone can improve primary stability as long as the stress does not exceed the localized yield strength of the cortical bone. Some implant designs have reduced crestal bone loss by use of multiple cutting threads that are closely spaced, smoothed on the tip but designed to create a hoop-stress stability of the implant as it is completely seated in the osteotomy. Following the placement of the implant, there is a predictable sequence of bone turnover and replacement at the interface that allows the newly formed bone to adapt to microscopic roughness on the implant surface, and on some surfaces, a nanotopography (<10(-9) m scale) that has been shown to preferably influence the formation of bone. Newly emerging studies show that bone cells are exquisitely sensitive to these topographical features and will upregulate the expression of bone related genes for new bone formation when grown on these surfaces. We live in an exciting time of rapid changes in the modalities we can offer patients for tooth replacement therapy. Given this, it is our responsibility to be critical when claims are made, incorporate into our practice what is proven and worthwhile, and to continue to support and provide the best patient care possible.
All children in Sweden are entitled to regular, free dental care up to 20 years of age. While dental caries generally continues to decline, still there is a pronounced skewness in caries prevalence. Furthermore, the reported increase in dental erosion in young adults is cause for concern. The aim was to study the prevalence of dental caries and dental erosion in a cohort of Swedish 20 year-olds, with special reference to the influence of previous caries experience and lifestyle as well as parental, socioeconomic and psychosocial factors. The study was prospective, longitudinal and cross-sectional in design and based on registration of caries lesions, dental erosion, body adiposity status, saliva sampling, interviews, and questionnaires at 20 years of age. Data were available for the same cohort at 1, 3, 6 and 15 years of age. 499 subjects (74 percent of the original cohort) were included. Five individuals were subsequently excluded, leaving a final sample of 494. 74 percent of the subjects had initial and/or manifest caries lesions and/or restorations. The mean number of DimFS was 5.8 and the mean number of DmFS on occlusal surfaces of molars was 1.1. There was a strong relationship between caries activity at 3 and 6 years of age and approximal caries prevalence in premolars and molars at 20 years of age. Overweight/obese individuals had significantly higher caries prevalence than normal weight individuals. Parental, socioeconomic and psychosocial factors during infancy were related to approximal caries at age 20. Dental erosion was found in 75 percent of the individuals: 18 percent of these had extensive erosion. There was a significant association between caries and dental erosion. A relationship was found between dental erosion and lifestyle factors and overweight/obesity. There is a strong relationship between caries prevalence at age 20 and caries experience in early childhood. Young adults show a high prevalence of dental erosion, but the severity is
This study investigated student and faculty perceptions of their experiences with online learning in dental hygiene Bachelor of Science degree completion programs on the dimensions of: quality of learning, connectedness to the learning environment, technology factors and student satisfaction. The experiences of dental hygiene students who took…
Waleed M. S. Al Qahtani
Full Text Available This article touched, in brief, the recent advances in dental materials and geometric modelling in dental applications. Most common categories of dental materials as metallic alloys, composites, ceramics and nanomaterials were briefly demonstrated. Nanotechnology improved the quality of dental biomaterials. This new technology improves many existing materials properties, also, to introduce new materials with superior properties that covered a wide range of applications in dentistry. Geometric modelling was discussed as a concept and examples within this article. The geometric modelling with engineering Computer-Aided-Design (CAD system(s is highly satisfactory for further analysis or Computer-Aided-Manufacturing (CAM processes. The geometric modelling extracted from Computed-Tomography (CT images (or its similar techniques for the sake of CAM also reached a sufficient level of accuracy, while, obtaining efficient solid modelling without huge efforts on body surfaces, faces, and gaps healing is still doubtable. This article is merely a compilation of knowledge learned from lectures, workshops, books, and journal articles, articles from the internet, dental forum, and scientific groups' discussions.
Manguno, Christine; Murray, Peter E; Howard, Cameron; Madras, Jonathan; Mangan, Stephen; Namerow, Kenneth N
The objective was to survey a group of dental residents regarding their expectations for using regenerative endodontic procedures as part of future dental treatments. After institutional review board approval, the opinions of 32 dentists who were having postgraduate residency training to become specialists in a dental school were surveyed. The survey had 40 questions about professional status, ethical beliefs, judgment, and clinical practice. It was found that 83.9% of dentists had no continuing education or training in stem cells or regenerative endodontic procedures. Results showed that 96.8% of dentists are willing to receive training to be able to provide regenerative endodontic procedures for their patients. Of the total group, 49.1% of dentists already use membranes, scaffolds, or bioactive materials to provide dental treatment. It was determined that 47.3% of dentists agree that the costs of regenerative procedures should be comparable with current treatments. It was also found that 55.1% of dentists were unsure whether regenerative procedures would be successful. Dentists are supportive of using regenerative endodontic procedures in their dental practice, and they are willing to undergo extra training and to buy new technology to provide new procedures. Nevertheless, dentists also need more evidence for the effectiveness and safety of regenerative treatments before they will be recommended for most patients. Copyright © 2012. Published by Elsevier Inc.
The Dental Classification system used by the uniformed services is supposed to predict the incidence of dental emergencies in the operational setting, at least on the unit level. Since most Sailors and Marines are deployed without close dental support, the sea services have adopted a policy of early treatment of class 3 dental conditions during recruit training. The other services are beginning to do the same. Recently, two factors have emerged that are affecting this early dental class 3 treatment. These factors must be considered when planning to provide early dental treatment. First, changing population and dentist provider demographics in the civilian sector are beginning to affect the class 3 treatment needs of incoming military recruits. Second, attrition from recruit training results in treatment provided to recruits who leave military service before finishing their training. Some view this as a waste of resources, others as a cost of doing business. As operational jointness increases, the three services must develop and use a single dental classification terminology, as well as unified standards and guidelines, both for better research in this area and for the readiness and well-being of our patients.
Lee, H.Y.; Choi, M.H.; Chang, J.H.; Jung, J.H.; Kim, M.E.; Lee, N.S.; Kim, J.Y.; Choi, M.C.
Recently the micropig has been developed as human disease model. The dental and orofacial region of micropig is similar to that of humans, so it has been used for testing implant materials and techniques. The purpose of this study is on dental image at each age using radiography and computed tomography. Total twenty-two male micropigs, two or three animals of each 1, 3, 5, 7, 9, 12, 18 and 24 months old, were given radiographic examinations. After general anesthesia, extra- and intra-oral radiographic technique and computed tomographic scans were performed to assess the dental characterization of micropigs. The total deciduous dental formula comprised 28 teeth and was depicted as Di 3/3, Dc 1/1, Dp 3/3. The total permanent dental formula comprised 44 teeth and was depicted as I 3/3, C 1/1, P 4/4, M 3/3. Hypodontia of the first premolars was common in the micropig. The permanent teeth erupted from 3 to 24 month after birth. The sequence of eruption of the permanent teeth was M1, P1, I3, C, M2, I1 + P3 + P4, P2, I2, M3. Dental imaging enables visualization of the unerupted teeth and gives more information about the development of the teeth. The growth pattern of the teeth obtained through radiographic and computed tomographic examination provides basic data in the micropig as animal model for dental research
Gahleitner, A.; Imhof, H.; Homolka, P.; Fuerhauser, R.; Freudenthaler, J.; Watzek, G.
Dental-CT is a relatively new, increasingly used investigation technique in dental radiology. Several authors have stated that the indication for Dental-CT has to be chosen on a strict basis, due to high dose values. This article describes the technique of performing dental-CT and calculates the effective dose based on published data and own measurements as well as the dose reduction potential to achieve an optimized protocol for Dental-CT investigations. (orig.) [de
Formicola, Allan J
This executive summary for Section 1 of the "Advancing Dental Education in the 21 st Century" project provides a composite picture of information from 12 background articles on the current state of dental education in the United States. The summary includes the following topics: the current status of the dental curriculum, the implications of student debt and dental school finances, the expansion of enrollment, student diversity, pre- and postdoctoral education, safety net status of dental school clinics, and trends in faculty.
D'Souza, Rena N; Colombo, John S
This is a critical time in the history of the dental profession for it to fully embrace the responsibility to safeguard its reputation as a learned profession. In this golden era of scientific and technological advances, opportunities abound to create new diagnostics, preventions, treatments, and cures to improve oral health. Dental schools are the largest national resource entrusted with the responsibility to educate, train, and retain oral health researchers who can leverage such technologies and research opportunities that will benefit the profession at large as well as patients. This article reemphasizes the theme that research training and scholarship must be inextricably woven into the environment and culture in dental schools to ensure the future standing of the profession. An overview of the history of support provided by the National Institutes of Health and National Institute of Dental and Craniofacial Research for the training and career development of dentist-scientists is presented. In addition, new data on the outcomes of such investments are presented along with a comparison with other health professions. This overview underscores the need to expand the capacity of a well-trained cadre of oral health researchers through the reengineering of training programs. Such strategies will best prepare future graduates for team science, clinical trials, and translational research as well as other emerging opportunities. The urgent need for national organizations like the American Dental Association, American Dental Education Association, and American Association for Dental Research to create new alliances and novel initiatives to assist dental schools and universities in fulfilling their research mission is emphasized. To ignore such calls for action is to disavow a valuable legacy inherited by the dental profession. This article was written as part of the project "Advancing Dental Education in the 21 st Century."
S K Mishra
Full Text Available The replacement of teeth by implants is usually restricted to patients with completed craniofacial growth. The aim of this literature review is to discuss the use of dental implants in normal growing patients and in patients with ectodermal dysplasia and the influence of maxillary and mandibular skeletal and dental growth on the stability of those implants. It is recommended that while deciding the optimal individual time point of implant insertion, the status of skeletal growth, the degree of hypodontia, and extension of related psychological stress should be taken into account, in addition to the status of existing dentition and dental compliance of a pediatric patient.
Holt, R D
Dental public health has been defined as 'the science and art of preventing oral diseases, promoting oral health and improving the quality of life through the organised efforts of society'. Dental practitioners most often have the oral health of individual patients as their primary focus but the aim of public health is to benefit populations. Early developments in dental public health were concerned largely with demonstrating levels of disease and with treatment services. With greater appreciation of the nature of oral health and disease, and of their determinants has come recognition of the need for wider public health action if the effects of prevention and oral health promotion are to be maximized.
Gerds, Thomas Alexander; Lauridsen, Eva Fejerskov; Christensen, Søren Steno Ahrensburg
Background/Aim Prediction tools are increasingly used to inform patients about the future dental health outcome. Advanced statistical methods are required to arrive at unbiased predictions based on follow-up studies. Material and Methods The Internet risk calculator at the Dental Trauma Guide...... provides prognoses for teeth with traumatic injuries based on the Copenhagen trauma database: http://www.dentaltraumaguide.org The database includes 2191 traumatized permanent teeth from 1282 patients that were treated at the dental trauma unit at the University Hospital in Copenhagen (Denmark...
Huang, M; Wang, R; Thompson, V; Rekow, D; Soboyejo, W O
This paper considers the use of bioinspired functionally graded structures in the design of dental multi-layers that are more resistant to sub-surface crack nucleation. Unlike existing dental crown restorations that give rise to high stress concentration, the functionally graded layers (between crown materials and the joins that attach them to dentin) are shown to promote significant reductions in stress and improvements in the critical crack size. Special inspiration is drawn from the low stress concentrations associated with the graded distributions in the dentin-enamel-junction (DEJ). The implications of such functionally graded structures are also discussed for the design of dental restorations.
Liberto, Vincent N
The definition of continuing dental education is presented, along with its benefits to the profession. The preeminence of dental schools in providing lifelong learning opportunities and freedom from commercial involvement that existed even twenty years ago has changed. Less than a quarter of CE takes place in school, and the focus there is increasingly on material with deep scientific background and hands-on learning. The newest innovations and those with the greatest commercial potential are taught elsewhere. Proposed changes in the ADA CERP standards would take on a "purist" approach that could place dental schools at a severe disadvantage while allowing "for profit" institutes to flourish and thus further undermine the role dental schools can play in providing quality professional development experiences.
Nigerian Dental Journal. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 19, No 1 (2011) >. Log in or Register to get access to full text downloads.
Stewart, C A
To discover the quality of written instructions from dentists to dental technicians and the nature of non-compliant prescriptions. An audit of laboratory prescription compliance was conducted within an NHS Trust Dental Teaching Hospital to determine the level of communication between dentists and dental technicians. One hundred and fifty prescriptions were audited from dental undergraduates and qualified dentists throughout the different departments. A total of two-thirds of prescriptions were considered non-compliant and failed to meet relevant ethical and legal guidelines. This problem was seen throughout all departments and at all professional levels. A breakdown in communication between dentists and technicians through the use of prescriptions is evident even within a close working environment.
Farges, Jean-Christophe; Alliot-Licht, Brigitte; Renard, Emmanuelle; Ducret, Maxime; Gaudin, Alexis; Smith, Anthony J.; Cooper, Paul R.
Dental caries is a chronic infectious disease resulting from the penetration of oral bacteria into the enamel and dentin. Microorganisms subsequently trigger inflammatory responses in the dental pulp. These events can lead to pulp healing if the infection is not too severe following the removal of diseased enamel and dentin tissues and clinical restoration of the tooth. However, chronic inflammation often persists in the pulp despite treatment, inducing permanent loss of normal tissue and red...
Ghosh, Soma; Roy, Gopa; Mukherjee, Biswajit
Oral administration of antibiotics to treat dental problems mostly yields slow actions due to slow onset and hepatic “first-pass.” Again, commonly used dental paints are generally washed out by saliva within few hours of application. To overcome the challenges, polymeric molds to be placed on an affected tooth (during carries and gum problems) were prepared and evaluated in vitro for sustained drug release for prolonged local action. Here, amoxicillin trihydrate and lidocaine hydrochloride we...
Full Text Available Formal lectures have been a traditional part of medical and dental education, but there is debate as to their compulsory status. This study was designed to explore dental and medical students’ views on compulsory lectures and the use of Video-Recorded Lectures (VRL. A cross-sectional study of University of Bristol students in Years 2 to 4 was conducted using an online questionnaire. The majority of both dental (76% and medical (66% students felt lectures should be non-compulsory. The most common learning resources used by both dental and medical students were live lectures, lecture handouts and VRL. The majority of both dental (84% and medical (88% students used VRL. Most students attended lectures all of the time both before and after the introduction of VRL, even though most dental and medical students believe lectures should be non-compulsory. VRL is a popular learning resource. These findings tie-in with General Dental Council and General Medical Council recommendations that encourage self-directed learning. Dental and Medical schools should offer a range of learning resources and make use of current technology, including the use of VRL.
Hamzah, Hajar S; Gao, Xiaoli; Yung Yiu, Cynthia K; McGrath, Colman; King, Nigel M
Internet social media offers a rich source for soliciting the public's views on health issues. This qualitative research, using You-Tube as a platform, aimed to explore the public's perspectives on management of dental fear and anxiety (DFA) in pediatric patients. Using three keywords ("dental fear," "dental phobia," and "dental anxiety"), YouTube videos were searched. Twenty-seven videos related to DFA in children and adolescents were reviewed by three investigators, including a nondental layperson. Inductive thematic analysis was adopted for interpreting the data. Several strategies were considered useful for controlling DFA in pediatric patients, including: verbal and nonverbal communication to establish closeness and effective guidance (explanation, permission-seeking, reassurance, and negotiation); desensitization to dental settings and procedures; tell-show-do; positive reinforcement; distraction by imagination and thoughtful designs of clinic; and parental presence and support. Some self-coping strategies adopted by patients alleviated their DFA, such as self-reasoning and trust-building through long-term connection. Dentists' clinical competence, favorable treatment outcomes, and state-of-the-art devices and technologies (dental lasers, intraoral camera, and adapted anaesthesia method) contributed to reducing DFA. Authentic testimonials in YouTube videos endorsed and interpreted a variety of strategies adoptable by patients, parents, and dental professionals for managing children's and adolescents' dental fears and anxieties.
Gahleitner, A.; Wien Univ.; Solar, P.; Ertl, L.; Nasel, C.; Homolka, P.; Youssefzadeh, S.; Schick, S.
Purpose: To demonstrate the usefulness of Dental-MRT for imaging of anatomic and pathologic conditions of the mandible and maxilla. Methods: Seven healthy volunteers, 5 patients with pulpitis, 9 patients with dentigerous cysts, 5 patients after tooth transplantation and 12 patients with atrophic mandibles were evaluated. Studies of the jaws using axial T1- and T2-weighted gradient echo and spin echo sequences in 2D and 3D technique have been to performed. The acquired images were reconstructed with a standard dental software package on a workstation as panoramic and cross sectional views of the mandible or maxilla. Results: The entire maxilla and mandibula, teeth, dental pulp and the content of the mandibular canal were well depicted. Patients with inflammatory disease of the pulp chamber demonstrate bone marrow edema in the periapical region. Dentigerous cysts and their relation to the surrounding structures are clearly shown. After contrast media application marked enhancement of the dental pulp can be found. Conclusion: Dental-MRT provides a valuable tool for visualization and detection of dental diseases. (orig.) [de
Teusner, D N; Ju, X; Brennan, D S
To estimate responsibility loadings for a comprehensive list of dental services, providing a standardized unit of clinical work effort. Dentists (n = 2500) randomly sampled from the Australian Dental Association membership (2011) were randomly assigned to one of 25 panels. Panels were surveyed by questionnaires eliciting responsibility loadings for eight common dental services (core items) and approximately 12 other items unique to that questionnaire. In total, loadings were elicited for 299 items listed in the Australian Dental Schedule 9th Edition. Data were weighted to reflect the age and sex distribution of the workforce. To assess reliability, regression models assessed differences in core item loadings by panel assignment. Estimated loadings were described by reporting the median and mean. Response rate was 37%. Panel composition did not vary by practitioner characteristics. Core item loadings did not vary by panel assignment. Oral surgery and endodontic service areas had the highest proportion (91%) of services with median loadings ≥1.5, followed by prosthodontics (78%), periodontics (76%), orthodontics (63%), restorative (62%) and diagnostic services (31%). Preventive services had median loadings ≤1.25. Dental responsibility loadings estimated by this study can be applied in the development of relative value scales. © 2017 Australian Dental Association.
Full Text Available All treatment involving the use of biomaterials in the body can affect the host in positive or negative ways. The microbiological environment in the oral cavity is affected by the composition and shape of the biomaterials used for oral restorations. This may impair the patients’ oral health and sometimes their general health as well. Many factors determine the composition of the microbiota and the formation of biofilm in relation to biomaterials such as, surface roughness, surface energy and chemical composition, This paper aims to give an overview of the scientific literature regarding the association between the chemical, mechanical and physical properties of dental biomaterials and oral biofilm formation, with emphasis on current research and future perspectives.
Computerised tomography (CT) plays a key role in the pre-surgical evaluation of the alveolar process for titanium dental implants. The successful replacement of lost teeth by tissue integrated tooth root implants is a major advance in clinical dentistry. The paper will discuss briefly the history of osseointegration and how CT is now involved in helping the edentulous patient. CT is considered as a quick and convenient method of obtaining excellent anatomical information about the maxilla. Conventional tomography is difficult to obtain and does not provide valuable cross-sectional images. Exact height and width calculations can be made as well as screening out patients with advanced bone resorption. 3 refs. 6 figs
Iqbal, Zeenat; Jain, Nilu; Jain, Gaurav K; Talegaonkar, Sushama; Ahuja, Alka; Khar, Roop K; Ahmad, Farhan J
The recognition of periodontal diseases as amenable to local antibiotherapy has resulted in a paradigmatic shift in treatment modalities of dental afflictions. Moreover the presence of antimicrobial resistance, surfacing of untoward reactions owing to systemic consumption of antibiotics has further advocated the use of local delivery of physiologically active substances into the periodontal pocket. While antimicrobials polymerized into acrylic strips, incorporated into biodegradable collagen and hollow permeable cellulose acetate fibers, multiparticulate systems, bio-absorbable dental materials, biodegradable gels/ointments, injectables, mucoadhesive microcapsules and nanospheres will be more amenable for direct placement into the periodontal pockets the lozenges, buccoadhesive tablets, discs or gels could be effectively used to mitigate the overall gingival inflammation. Whilst effecting controlled local delivery of a few milligram of an antibacterial agent within the gingival crevicular fluid for a longer period of time, maintaining therapeutic concentrations such delivery devices will circumvent all adverse effects to non- oral sites. Since the pioneering efforts of Goodson and Lindhe in 1989, delivery at gingival and subgingival sites has witnessed a considerable progress. The interest in locally active systems is evident from the patents being filed and granted. The present article shall dwell in reviewing the recent approaches being proffered in the field. Patents as by Shefer, et al. US patent, 6589562 dealing with multicomponent biodegradable bioadhesive controlled release system for oral care products, Lee, et al. 2001, US patent 6193994, encompassing a locally administrable, biodegradable and sustained-release pharmaceutical composition for periodontitis and process for preparation thereof and method of treating periodontal disease as suggested by Basara in 2004via US patent 6830757, shall be the types of intellectual property reviewed and presented in
Wiener, R Constance
The people of Appalachia-West Virginia are culturally unique and are known to have oral health disparities. The purpose of this study was to evaluate dental fear in relation to delayed dental care as a factor influencing oral health behaviors within this culture. A cross sectional study design was used. Participants were urgent care patients in a university dental clinic. The sample included 140 adults over age 18 years. The Dental Fear Survey was used to determine dental fear level. Self-report of delayed dental care was provided by the participants. The Dental Fear Survey was dichotomized at score 33, with higher scores indicating dental fear. The prevalence of dental fear was 47.1% (n=66). There was a significant association of dental fear and dental delay. The unadjusted odds ratio was 2.87 (95% CI: 1.17, 7.04; p=0.021). The adjusted odds ratio was 3.83 (95%CI: 1.14, 12.82; p=0.030), controlling for tobacco use, perceived oral health status, pain, and last dental visit. A difference in dental delay between men and women was not present in this sample. The only significant variable in delayed dental care was dental fear. In Appalachia-West Virginia, there remains a high level of dental fear, despite advances in dental care, techniques, and procedures. Copyright © 2015 The American Dental Hygienists’ Association.
Silva, Lucas Hian da; Lima, Erick de; Miranda, Ranulfo Benedito de Paula; Favero, Stéphanie Soares; Lohbauer, Ulrich; Cesar, Paulo Francisco
The evolution of computerized systems for the production of dental restorations associated to the development of novel microstructures for ceramic materials has caused an important change in the clinical workflow for dentists and technicians, as well as in the treatment options offered to patients. New microstructures have also been developed by the industry in order to offer ceramic and composite materials with optimized properties, i.e., good mechanical properties, appropriate wear behavior and acceptable aesthetic characteristics. The objective of this literature review is to discuss the main advantages and disadvantages of the new ceramic systems and processing methods. The manuscript is divided in five parts: I) monolithic zirconia restorations; II) multilayered dental prostheses; III) new glass-ceramics; IV) polymer infiltrated ceramics; and V) novel processing technologies. Dental ceramics and processing technologies have evolved significantly in the past ten years, with most of the evolution being related to new microstructures and CAD-CAM methods. In addition, a trend towards the use of monolithic restorations has changed the way clinicians produce all-ceramic dental prostheses, since the more aesthetic multilayered restorations unfortunately are more prone to chipping or delamination. Composite materials processed via CAD-CAM have become an interesting option, as they have intermediate properties between ceramics and polymers and are more easily milled and polished.
Lucas Hian da SILVA
Full Text Available Abstract The evolution of computerized systems for the production of dental restorations associated to the development of novel microstructures for ceramic materials has caused an important change in the clinical workflow for dentists and technicians, as well as in the treatment options offered to patients. New microstructures have also been developed by the industry in order to offer ceramic and composite materials with optimized properties, i.e., good mechanical properties, appropriate wear behavior and acceptable aesthetic characteristics. The objective of this literature review is to discuss the main advantages and disadvantages of the new ceramic systems and processing methods. The manuscript is divided in five parts: I monolithic zirconia restorations; II multilayered dental prostheses; III new glass-ceramics; IV polymer infiltrated ceramics; and V novel processing technologies. Dental ceramics and processing technologies have evolved significantly in the past ten years, with most of the evolution being related to new microstructures and CAD-CAM methods. In addition, a trend towards the use of monolithic restorations has changed the way clinicians produce all-ceramic dental prostheses, since the more aesthetic multilayered restorations unfortunately are more prone to chipping or delamination. Composite materials processed via CAD-CAM have become an interesting option, as they have intermediate properties between ceramics and polymers and are more easily milled and polished.
Odontophobia is a rather unique phobia with special psychosomatic components that impact on the dental health of odontophobic persons. It also has psychosocial components largely as a result of destruction of the teeth and subsequent embarrassment that can affect a person and cause a vicious cycle...... of dental fear (see fig. 1). The phenomenon is facilitated by misunderstandings and myths generated by both patients and dentists (see table 1 for examples). The most common reasons given in the literature for such strong fears of dental treatment are: 1) bad experiences in childhood for 85% of cases, 2......) feeling of powerlessness and lack of control over personal emotional reactions and over the social situation in the dental chair, 3) social learning processes in which the image of the dentist is cast in a negative light by the mass media or by the person's relatives or friends and 4) that the person has...
... of contact after hours (i.e.: office or cell phone number, on-call pager), and failing that, you ... Eric Stoopler Featured in the Bulletin of Dental Education AAOM Board Member Featured in PennCurrent AAOM Featured ...
Hakim A. Larbi and Dmitry Ye. Suyetenkov
Full Text Available This article highlights the comparative statistics of musculoskeletal system deseases depending on a type of dental method. The practical recommendations on prevention of diseases of joints, ligaments and spine were done.
Ravi SS Toor
Full Text Available Dental insurance is insurance designed to pay the costs associated with dental care. The Foreign Direct Investment (FDI bill which was put forward in the winter session of the Lok Sabha (2008 focused on increasing the foreign investment share from the existing 26% to 49% in the insurance companies of India. This will allow the multibillion dollar international insurance companies to enter the Indian market and subsequently cover all aspects of insurance in India. Dental insurance will be an integral a part of this system. Dental insurance is a new concept in Southeast Asia as very few countries in Southeast Asia cover this aspect of insurance. It is important that the dentists in India should be acquainted with the different types of plans these companies are going to offer and about a new relationship which is going to emerge in the coming years between dentist, patient and the insurance company.
DENTAL HEALTH PROBLEMS. 1. Pain due to ... increased intake of sweets and sweet snacks, ... to restrain production, import and marketing of modern sweets ... STRATEGY .... water we drink and bathe In. They are always ready to heip us or ...
Full Text Available Dental abscess is a frequently occurring infectious process known to the health practice. The fate of the infection depends on the virulence of the bacteria, host resistance factors, and regional anatomy. Serious consequences arising from the spread of a dental abscess lead to significant morbidity and mortality. Acute dental abscess is polymicrobial, comprising of strict anaerobes, such as anaerobic cocci, Prevotella, Fusobacterium species, and facultative anaerobes, such as viridans group streptococci and the Streptococcus anginosus group. Numerous novel, uncultivable and fastidious organisms have been identified as potential pathogens with the use of non-culture techniques. The majority of localized dental abscesses respond to surgical treatment while the use of antimicrobials is limited to severe spreading infections. There is a need for good-quality clinical trials of sufficient size to identify the ideal treatment. The microbiology of the acute dentoalveolar abscess and its treatment in the light of improved culture and diagnostic methods are reviewed.
Bahadori, Mohammadkarim; Raadabadi, Mehdi; Ravangard, Ramin; Baldacchino, Donia
Measuring dental clinic service quality is the first and most important factor in improving care. The quality provided plays an important role in patient satisfaction. The purpose of this paper is to identify factors affecting dental service quality from the patients' viewpoint. This cross-sectional, descriptive-analytical study was conducted in a dental clinic in Tehran between January and June 2014. A sample of 385 patients was selected from two work shifts using stratified sampling proportional to size and simple random sampling methods. The data were collected, a self-administered questionnaire designed for the purpose of the study, based on the Parasuraman and Zeithaml's model of service quality which consisted of two parts: the patients' demographic characteristics and a 30-item questionnaire to measure the five dimensions of the service quality. The collected data were analysed using SPSS 21.0 and Amos 18.0 through some descriptive statistics such as mean, standard deviation, as well as analytical methods, including confirmatory factor. Results showed that the correlation coefficients for all dimensions were higher than 0.5. In this model, assurance (regression weight=0.99) and tangibility (regression weight=0.86) had, respectively, the highest and lowest effects on dental service quality. The Parasuraman and Zeithaml's model is suitable to measure quality in dental services. The variables related to dental services quality have been made according to the model. This is a pioneering study that uses Parasuraman and Zeithaml's model and CFA in a dental setting. This study provides useful insights and guidance for dental service quality assurance.
DenBesten, Pamela; Li, Wu
Dental fluorosis occurs as a result of excess fluoride ingestion during tooth formation. Enamel fluorosis and primary dentin fluorosis can only occur when teeth are forming, and therefore fluoride exposure (as it relates to dental fluorosis) occurs during childhood. In the permanent dentition, this would begin with the lower incisors, which complete mineralization at approximately 2–3 years of age, and end after mineralization of the third molars. The white opaque appearance of fluorosed enam...
Gonzalez, M. A. G.; Abu Kasim, N. H.; Naimie, Z.
Soft skills and hard skills are essential in the practice of dentistry. While hard skills deal with technical proficiency, soft skills relate to a personal values and interpersonal skills that determine a person's ability to fit in a particular situation. These skills contribute to the success of organisations that deal face-to-face with clients. Effective soft skills benefit the dental practice. However, the teaching of soft skills remains a challenge to dental schools. This paper discusses ...
McComas, Martha J; Inglehart, Marita R
The changing role of dental hygienists deserves dental and dental hygiene educators' attention. The first aim of this survey study was to assess University of Michigan dental, dental hygiene, and graduate students' and faculty members' perceptions of dental hygienists' roles; their attitudes and behaviors related to clinical interactions between dental and dental hygiene students; and perceived benefits of engaging dental hygiene students as peer teachers for dental students. The second aim was to assess whether one group of dental students' experiences with dental hygiene student peer teaching affected their perceptions of the dental hygiene profession. Survey respondents were 57 dental hygiene students in all three years of the program (response rate 60% to 100%); 476 dental students in all four years (response rate 56% to 100%); 28 dental and dental hygiene graduate students (response rate 28%); and 67 dental and dental hygiene faculty members (response rate 56%). Compared to the other groups, dental students reported the lowest average number of services dental hygienists can provide (p≤0.001) and the lowest average number of patient groups for which dental hygienists can provide periodontal care (ppeer teaching (ppeer teaching. After experiencing dental hygiene student peer teaching, the dental students' perceptions of dental hygienists' roles, attitudes about clinical interactions with dental hygienists, and perceived benefits of dental hygiene student peer teachers improved and were more positive than the responses of their peers with no peer teaching experiences. These results suggest that dental hygiene student peer teaching may improve dental students' perceptions of dental hygienists' roles and attitudes about intraprofessional care.
Sinescu, Cosmin; Barua, Souman; Topala, Florin Ionel; Negrutiu, Meda Lavinia; Duma, Virgil-Florin; Gabor, Alin Gabriel; Zaharia, Cristian; Bradu, Adrian; Podoleanu, Adrian G.
INTRODUCTION: The use of Optical Coherence Tomography (OCT) as a non-invasive and high precision quantitative information providing tool has been well established by researches within the last decade. The marginal discrepancy values can be scrutinized in optical biopsy made in three dimensional (3D) micro millimetre scale and reveal detailed qualitative and quantitative information of soft and hard tissues. OCT-based high resolution 3D images can provide a significant impact on finding recurrent caries, restorative failure, analysing the precision of crown preparation, and prosthetic elements marginal adaptation error with the gingiva and dental hard tissues. During the CAD/CAM process of prosthodontic restorations, the circumvent of any error is important for the practitioner and the technician to reduce waste of time and material. Additionally, OCT images help to achieve a new or semi-skilled practitioner to analyse their crown preparation works and help to develop their skills faster than in a conventional way. The aim of this study is to highlight the advantages of OCT in high precision prosthodontic restorations. MATERIALS AND METHODS: 25 preparations of frontal and lateral teeth were performed for 7 different patients. The impressions of the prosthetic fields were obtained both using a conventional optoelectronic system (Apolo Di, Syrona) and a Spectral Domain using OCT (Dental prototype, working at 860 nm). For the conventional impression technique the preparation margins were been prelevated by gingival impregnated cords. No specific treatments were performed by the OCT impression technique. RESULTS: The scanning performed by conventional optoelectronic system proved to be quick and accurate in terms of impression technology. The results were represented by 3D virtual models obtained after the scanning procedure was completed. In order to obtain a good optical impression a gingival retraction cord was inserted between the prepared tooth and the gingival
Some socio-medical aspects of preventive and curative dental care. Preventive and early curative dental care is considered as an integral part of general health behavior in the individual. Different variables possibly determining such behavior are discussed. Demographic factors as age, sex, place of residence, as well as family and educational background, income and vocation seem to be of importance. A dental health delivery system free of charge to everyone in the age group 6-18, eventually up to 21 years has been available for several years in Norway. We assume that this has had a great impact upon the motivations for a positive atitude towards preventive care, particularly since economic barriers have been reduced simultaneously with shift in the popular value aspects of having good dental health status. Plans for a future incorporation of dental care into a total national health service, comprising the entire population, in order to make the delivery system feasible for everyone, will probably stimulate a still wider interest and motivation for preventive and early dental care.
Dental offices are no exception to the implementation of new and advanced technology, especially if it enhances productivity. In a rapidly transforming digital world, wireless technology has a special place, as it has truly "retired the wire" and contributed to the ease and efficient access to patient data and other software-based applications for diagnosis and treatment. If the office or the clinic is networked, access to patient management software, imaging software and treatment planning tools is enhanced. Access will be further enhanced and unrestricted if the entire network is wireless. As with any new, emerging technology, there will be issues that should be kept in mind before adapting to the wireless environment. Foremost is the network security involved in the installation and use of these wireless networks. This short, technical manuscript deals with standards and choices in wireless technology currently available for implementation within a dental office. The benefits of each network security protocol available to protect patient data and boost the efficiency of a modern dental office are discussed.
Milsom, K M; Tickle, M; Blinkhorn, A S
The objective was to examine the relationship between dental pain (and its sequelae), and the extent of restorative care provided for primary molars, amongst children who regularly attend a general dental practitioner. A retrospective review of the clinical case notes of 677 children with caries who attended 50 general dental practitioners on a regular basis. Analyses were performed at the subject level. Logistic regression models were fitted for the dependent variables whether or not pain, a dental extraction for pain or sepsis and a course of antibiotics was recorded, after taking into account the proportion of carious teeth that were restored, the total number of carious teeth, the age caries was first recorded, gender and the clustering of the subjects within dental practices. Almost half of the children in the study (48%) were recorded as having at least one episode of pain. Total decay experience in the primary molars was a significant predictor of pain, extraction due to pain or sepsis and prescription of antibiotics. There was no significant association between the proportion of carious teeth restored and each of the three dependent variables. For those children who regularly attend their general dental practitioner and who have decay in their primary molars, dental pain is a common finding. Total decay experience in primary molars is the principal predictor of pain, extraction due to pain and the need for antibiotics, whilst the level of restorative care in the primary dentition is less important. In order to reduce the incidence of dental pain in young children, effective methods of preventing caries at the individual and public health levels need to be expanded.
Sonneveld, R E; Brands, W G; Bronkhorst, E M; Welie, J V M; Truin, G J
In view of transparency in health care, the widespread desire for more patient-centred care, and in an attempt to facilitate educational programmes that effectively respond to these changes, two research questions are formulated: (i) How do dental students rate the importance of various organisational aspects of dental practices compared with dental patients and general dental practitioners (GDPs), and what prescripts, defined as specific operational responsibilities of GDPs in these matters, do dental students propose? and (ii) In doing so, do students resemble patients or GDPs? In two survey studies, dental students (n = 198), patients (n = 3127) and GDPs (n = 303) were asked to rate by questionnaire the importance of 41 organisational aspects of a general dental practice and proposed specific operational responsibilities ('prescripts'). Seven of 41 aspects were rated as important by the majority of the students. Although in a different rank order, three aspects were predominantly selected by all three groups: continuing education, accessibility by telephone and Dutch-speaking GDP. For most aspects, significant differences were found between the prescripts proposed by students and those proposed by patients, and few differences were found between students and GDPs. The findings do not permit the general conclusion that the views of dental students resemble those of patients or GPDs. Looking at the overall rank order, the three respondent groups showed a great resemblance although significant differences were found for specific aspects. With regard to the proposed prescripts, students showed realistic views and the majority wants to participate in continuing education and work with protocols and guidelines. In this, they tend to resemble GDPs more than they resemble patients. © 2012 John Wiley & Sons A/S.
Paramashivaiah, Rashmi; Prabhuji, M L V; Narayanan, Roopalakshmi
This article reviews the issue of dental unit waterline (DUWL) contamination which affects all the clinical and hospital settings. The contaminating microorganisms commonly isolated from these settings and the most pathogenic among them have serious consequences. Over the years several measures are inculcated for decontamination of water, their advantages and shortcomings have been addressed. Options using nanotechnology which are available in the market are described briefly. A manual and electronic search was conducted. Google and PubMed were searched for relevant material from studies up to 2013. Medical Subject Headings words looked for were "Nanotechnology," "Water purification," and "Biofilms." Reviewed findings were summarized by topic, using the Preferred Reporting Items for Systematic Reviews and Meta-analyses statement for reporting. Seventy articles were shortlisted for articles pertaining to our topic of discussion. A systematic approach was followed by two independent reviewers and included eligibility criteria for study inclusion, data extraction, data synthesis, and drawing of conclusion. Dental waterline contamination is widespread in any type of dental setting having serious implications on clinicians and patients alike, especially elderly and immune-compromised. Hence, international bodies like center for disease and control and American Dental Association have come up with stringent measures for maintenance of water quality. A gamut of procedures has been tried to overcome this problem ranging from chlorinated products, water filters to the usage of distilled water. The use of nanoemulsions, nanofilters, nanomembranes, etc., and their applicability for routine usage is discussed. Biofilm formation in DUWLs is inevitable with the subsequent release of part of microbiota into the otherwise sterile dental settings. These consequences can be quite serious on clinicians and dental patients. Though conventional measures in water decontamination have
Gussy, M G; Knevel, R J M; Sigurdson, V; Karlberg, G
Globalization and concurrent development in computer and communication technology has increased interest in collaborative online teaching and learning for students in higher education institutions. Many institutions and teachers have introduced computer-supported programmes in areas including dental hygiene. The potential for the use of this technology is exciting; however, its introduction should be careful and considered. We suggest that educators wanting to introduce computer-supported programmes make explicit their pedagogical principles and then select technologies that support and exploit these principles. This paper describes this process as it was applied to the development of an international web-based collaborative learning programme for dental hygiene students.
Júnia M. Serra-Negra
Full Text Available The aim of the present study was to evaluate the association between childhood dental experiences and dental fear in adulthood among dentistry, psychology and mathematics undergraduate students. A cross-sectional study of 1,256 students from the city of Belo Horizonte, Brazil, was performed. Students responded to the Brazilian version of the Dental Fear Survey (DFS and a questionnaire regarding previous dental experiences. Both the DFS and the questionnaire were self-administered. Association was tested using descriptive, bivariate and multivariate linear regression analysis, with a 5% significance level. Dentistry undergraduates reported lower scores than psychology (p < 0.001 and mathematics undergraduates (p < 0.05 for all three dimensions of the DFS. Negative dental experiences in childhood was associated with dimensions of Avoidance (B = 2.70, p < 0.001, Physiological arousal (B = 1.42, p < 0.001 and Fears of specific stimuli/situations (B = 3.44, p < 0.001. The reason for first visit to dentist was associated with dimensions of Physiological arousal (B = 0.76, p < 0.01 and Fears of specific stimuli/situations (B = 1.29, p < 0.01. Dentists should be encouraged to evaluate the dental fear of their patients before treatment. The DFS has been found to be an effective instrument for this purpose.
Wu, Z Y; Zhang, Z Y; Jiang, X Q; Guo, L
Different educational and professional developments within the dental field create different sets of missions, norms, and practices regarding dental diseases and their appropriate treatment. This review has addressed differences in dental education and professional development between mainland China and North America. Many factors influence the choice of model and it is very difficult to predict which model will become predominant. However, there is growing sentiment that the independent faculty model in North America is logical and superior to the model, which 'integrates' dental and medical education in mainland China. Many North America dental schools place a high priority on preclinical and clinical training in the curriculum in order to expose students to patient oral health needs and systemic dental problems much earlier than in mainland China. North America dental schools promote and embrace students self-learning skills by the use of PBL, CRL, and TRAD education methodologies and new e-based technologies and approaches whereby students learn rather than are taught. In mainland China, the traditional lecture-based format is still employed in the majority of dental schools; however, strategies to enhance students self-learning skills is increasingly utilised in most well-known Chinese dental schools. The Chinese dental education model, which treats dentistry as a sub-specialty of medicine, has brought about fundamental differences, with the dentist functioning essentially as a stomatologist. For example, China has built up a large oral and maxillofacial surgery society, and craniofacial surgery is performed to a much broader extent by Chinese dentists than by most North American counterparts. In North America, dentists engage in full-time work, attend continuing training/education programmes, belong to an association, gain legal status, and construct a code of ethics emphasising the quality of care delivered to the public. Currently, continuing dental
Has the state's manipulation of the NHS dental contract systems deliberately, or accidentally, had corrupting effects on the behaviours of some members of the dental profession? If the answer is 'possibly' or 'probably', then obvious questions that follow include, 'was this done deliberately' and if so, 'why'? Could this have been done for largely altruistic reasons, or was it done to achieve government control for minimum cost? Might this have been undertaken for political, financial or ideological reasons - regardless of any adverse longer term consequences for some patients or for some dental professionals? Might it have been done to take greater control of the dental profession on the grounds that all professions are a conspiracy against the laity, as the mildly paranoid George Bernard Shaw once alleged? Is it possible that some of this manipulation might have been done to help to disempower yet another profession, allegedly to 'modernise it', but perhaps to enslave it for its own reasons? Was this just another example of some statist politicians wanting to interfere in all aspects of UK society, regardless of their lack of specific understanding, or any proven expertise, in many areas? Could the state's manipulation of contracts and processes be regarded as an abuse of power by a virtual monopoly, which has been used to control a largely altruistic profession by imposing corrupting NHS dental contract systems with the most recent one involving 'units of dental activity' (UDAs)? Perhaps it was really about some politicians wanting ever more power, control or money - their usual drivers - with the dental and medical professions accidentally becoming casualties?
Maltz, Marisa; Jardim, Juliana Jobim; Alves, Luana Severo
The central idea of the Brazilian health system is to prevent the establishment of disease or detect it as early as possible. Prevention and treatment of dental caries are related to behavioral factors, including dietary and oral hygiene habits, which are related to many chronic diseases. Dental health promotion therefore should be fully integrated into broadly based health-promoting strategies and actions such as food and health policies, and general hygiene (including oral hygiene), among others. For decades, a linear relationship between sugar consumption and caries has been observed. Recent data has indicated that this relationship is not as strong as it used to be before the widespread use of fluoride. However, diet is still a key factor acting in the carious process. Oral hygiene is a major aspect when it comes to caries, since dental biofilm is its etiological factor. Oral hygiene procedures are effective in controlling dental caries, especially if plaque removal is performed adequately and associated with fluoride. An alternative to a more efficient biofilm control in occlusal areas is the use of dental sealants, which are only indicated for caries-active individuals. If a cavity is formed as a consequence of the metabolic activity of the biofilm, a restorative material or a sealant can be placed to block access of the biofilm to the oral environment in order to prevent caries progress. The prevention of dental caries based on common risk-factor strategies (diet and hygiene) should be supplemented by more disease-specific policies such as rational use of fluoride, and evidence-based dental health care.
Full Text Available The central idea of the Brazilian health system is to prevent the establishment of disease or detect it as early as possible. Prevention and treatment of dental caries are related to behavioral factors, including dietary and oral hygiene habits, which are related to many chronic diseases. Dental health promotion therefore should be fully integrated into broadly based health-promoting strategies and actions such as food and health policies, and general hygiene (including oral hygiene, among others. For decades, a linear relationship between sugar consumption and caries has been observed. Recent data has indicated that this relationship is not as strong as it used to be before the widespread use of fluoride. However, diet is still a key factor acting in the carious process. Oral hygiene is a major aspect when it comes to caries, since dental biofilm is its etiological factor. Oral hygiene procedures are effective in controlling dental caries, especially if plaque removal is performed adequately and associated with fluoride. An alternative to a more efficient biofilm control in occlusal areas is the use of dental sealants, which are only indicated for caries-active individuals. If a cavity is formed as a consequence of the metabolic activity of the biofilm, a restorative material or a sealant can be placed to block access of the biofilm to the oral environment in order to prevent caries progress. The prevention of dental caries based on common risk-factor strategies (diet and hygiene should be supplemented by more disease-specific policies such as rational use of fluoride, and evidence-based dental health care.
Diana L. Eubanks
Full Text Available Periodontal disease is among the most prevalent canine dis-eases affecting over 75% of dogs. Strengthening of the human-animal bond and the increasing education of the aver-age pet owner, have fostered a heightened awareness of periodontal care in dogs and cats. Industry support has further assisted the small animal veterinarian in providing quality dental treatments and prevention. As recently as the 1990’s, veterinary curriculums contained little or no dental training. That trend is changing as nearly every one of the 28 US Colleges of Veterinary Medicine offers some level of small animal dentistry during the four-year curriculum. Primary areas of focus are on client education, the treatment of periodontal disease, dental prophylaxis, dental radiology, endodontics, exodontics and pain control. Students receive instruction in dental anatomy during their di-dactic curriculum and later experience clinical cases. Graduate DVMs can attend a variety of continuing education courses and even choose to specialize in veterinary dentistry in both small animals and horses. Through the efforts of organizations such as the American Veterinary Dental So-ciety, The American Veterinary Dental College and The Academy of Veterinary Dentistry, many veterinarians have been able to advance their skills in dentistry and improve animal welfare. Increasing ex-pectations of the pet-owning public coupled with the recent advancements of training opportunities available for vete-rinary students, graduate DVMs and certified veterinary technicians make veterinary dentistry an emerging practice-builder among the most successful small animal hospitals.
Sunil Kumar Mishra
Full Text Available Purpose: Anodized implants with moderately rough surface were introduced around 2000. Whether these implants enhanced biologic effect to improve the environment for better osseointegration was unclear. The purpose of this article was to review the literature available on anodized surface in terms of their clinical success rate and bone response in patients till now. Materials and Methods: A broad electronic search of MEDLINE and PubMed databases was performed. A focus was made on peer-reviewed dental journals. Only articles related to anodized implants were included. Both animal and human studies were included. Results: The initial search of articles resulted in 581 articles on anodized implants. The initial screening of titles and abstracts resulted in 112 full-text papers; 40 animal studies, 16 studies on cell adhesion and bacterial adhesion onto anodized surfaced implants, and 47 human studies were included. Nine studies, which do not fulfill the inclusion criteria, were excluded. Conclusions: The long-term studies on anodized surface implants do favor the surface, but in most of the studies, anodized surface is compared with that of machined surface, but not with other surfaces commercially available. Anodized surface in terms of clinical success rate in cases of compromised bone and immediately extracted sockets has shown favorable success.
Full Text Available In the present study we aimed to optimize the thermal imaging method for evaluation of skin patch test reactions in dental clinical allergology. A total of 30 patients without a history of allergic diseases were included in the study - 12 men and 18 women, age 21 - 32 years. Skin patch testing was performed with a set of 20 standardized allergens. The thermographic investigations were performed with the FlirT620 infrared camera with a temperature resolution of 0,06°C. Thermograms were analysed using the Flir Reporter Professional software 2013. The statistical analysis of the results revealed an average correlation between the clinical evaluation of the results according to the cheme of ICDRG and the thermal image diagnostic (rphi = 0.538, p = 0.001. Absolute matching of clinical and thermal image results was observed only for the negative ones. For the clinically positive skin patch results matching with thermal image method was observed in 60.7% of the cases. Optimization of thermal imaging as a method for evaluation of skin patch test results could serve as a safe, accurate and non-invasive method, especially to distinguish weak (+, doubtful and irritant reactions, although not standardized criteria to distinguish these reactions have been elaborated yet. Crucial factor for the accurate interpretation of results is the precise diagnosing performed by well-trained physicians in this area, with clinical relevance, to minimize the role of subjective factors.
Christensen, Lisa Bøge; Petersen, Poul Erik; Bastholm, Annelise
The objectives of the study were: 1) to describe the choice of dental care system among 16-year-olds, 2) to describe the utilization of dental services among 16-17-year-olds enrolled in either public or private dental care systems, and to compare the dental services provided by the alternative...
ten Berge, M.; Veerkamp, J.S.J.; Hoogstraten, J.
This study aimed to examine the relative importance of invasive treatment experiences in the acquisition of dental fear in children. For this purpose, the complete dental history of 401 children (aged 5-10 years) was studied. The level of dental fear in these children was assessed using the Dental
.... FDA-2012-N-0677] Dental Devices; Reclassification of Blade-Form Endosseous Dental Implant AGENCY: Food...) is proposing to reclassify the blade- form endosseous dental implant, a preamendments class III... proposing to revise the classification of blade-form endosseous dental implants. DATES: Submit either...
Conclusion: The microhardness of the bracket-like blocks made by our new material is superior to the commercially available brackets, even after thermocycling. Our results indicate that the evaluated liquid crystalline epoxy nanocomposite materials are of an appropriate quality for application in dental core and post systems and in various restorations. By applying technology to refine manufacturing processes, these new materials could also be used to fabricate esthetic brackets for orthodontic treatment.
Nayar, Sanjna; Mahadevan, R.
Digital dental impression is a revolutionary technological advancement that so surpasses the accuracy and efficiency of former techniques for obtaining replicas of prepared teeth for the purpose of fabricating restorations that its adoption by dentists is rapidly eclipsing the use of elastomeric impression materials. The ultimate goals of dentists dedicated to quality restorative dentistry are to make their treatment of patients as accurate, stressless, and efficient as possible. By eliminati...
Aartman, I.H.A.; de Jongh, A.; Makkes, P.C.; Hoogstraten, J.
The aim of the present study was to assess treatment outcome in terms of dental anxiety reduction at a post-treatment assessment and dental anxiety reduction and dental attendance one year later. Furthermore, it was determined to what extent psychopathological characteristics were related to
Journal of Dental Education, 1985
The American Association of Dental Schools curriculum guidelines for clinical dental hygiene include definitions, notes on the interrelationship of courses, an overview of course objectives, and suggested primary educational goals, prerequisites, core content, specific objectives, sequencing, faculty, and facilities. (MSE)
DENTAL CARE EVERY DAY A Caregiver’s Guide U.S. DEPARTMENT OF HEALTH AND HUMAN SERVICES NATIONAL INSTITUTES OF HEALTH National Institute of Dental and Craniofacial Research Contents Getting Started ................................................................................ 2 Three ...
... Digestive System & How it Works Zollinger-Ellison Syndrome Dental Enamel Defects and Celiac Disease Celiac disease manifestations ... affecting any organ or body system. One manifestation—dental enamel defects—can help dentists and other health ...
... What's this? Submit Button NCHS Home Oral and Dental Health Recommend on Facebook Tweet Share Compartir Data ... States, 2016, table 60 [PDF – 9.8 MB] Dental visits Percent of children aged 2-17 years ...
Olanrewaju Abdurrazaq Taiwo
Full Text Available Background: The emergence of osseointegrated dental implants has resulted in several applications in diverse clinical settings. Hence, has contributed to the suitable replacement of missing teeth and the realization of an optimal facial appearance. This paper describes the benefits, applications, contraindications, and complications of dental implants in contemporary dental practice. Materials and Methods: An electronic search was undertaken in PUBMED without time restriction for appropriate English papers on dental implants based on a series of keywords in different combinations. Results: Fifty-eight acceptable, relevant articles were selected for review. The review identified the various components of dental implants, classification, and brands. It also looked at osseointegration and factors promoting and inimical to it. It also explored primary and secondary stability; and patients' selection for a dental implant. Complications of dental implants were also highlighted. Conclusion: With over 95% success rate, dental implants remain the gold standard for achieving aesthetic and functional oral rehabilitation.
Endodontics, JSS Dental College and Hospital, Mysore, Karnataka, India. Abstract ... Keywords: Dental fistula, Localized drug delivery, Root canal treatment. Access this article ... combination of intra-canal irrigants was selected. Hypochlorite.
Soares, Fernanda C.; Lima, Rodrigo A.; de Barros, Mauro V.G.
's health-related behaviours. Additionally, the children's dental caries experience was clinically evaluated to obtain information about DMFT/dmft (decayed, filled and missing teeth) indices. Using the Dental Anxiety Question, children whose parents responded “yes” to the prompt “Is he/she very afraid...... used medication chronically had a 2.1 times greater likelihood of having high dental anxiety. Furthermore, children whose parents reported high dental anxiety had a 2.6 times greater likelihood of having high dental anxiety themselves. A one-unit increase in a child's dmft score increased the risk...... of high dental anxiety by 1.1 times at follow-up. Conclusion: After two years, the incidence of high dental anxiety was 15.0%. Poor oral health, unstable general health and parents with high dental anxiety were factors that were associated with this type of anxiety in schoolchildren. It is important...
There is a shortage of research from dental practice. The aim of this article is to stimulate more interest in dental research. This is done by explaining the basic principles of doing research in a dental practice setting. Examples are taken from the author's own practice. Emphasis is placed on the following points: how to develop and research ideas; factors specific to dental practice; how articles and journals are rated; making a protocol for the study; examiners' reliability and statistical analysis.
田村, 俊吉; タムラ, シュンキチ; Shunkichi, TAMURA
Nutrition is an effective factor for the inhibition of the development of dental caries. The constitution of diet has a strong bearing on the development of dental caries. However the theoretical background regarding the development of dental caries has not been sastifactorily established. Experimentally, we have clarified the relation of nutrition and dental caries in rats. Experimental animals used in this study were Wistar strain Albino rats (closed colony, Tamura, 1950). Young rats of 21 ...
Batra, Manu; Gupta, Mudit; Dany, Subha Soumya; Rajput, Prashant
Biostatistics is becoming an integral part of dental sciences. Awareness regarding the subject is not thoroughly assessed in the field of dentistry. So the study was conducted to assess dental professionals' knowledge, attitude, and perception toward biostatistics at an academic dental institution. An anonymous cross-sectional questionnaire survey was conducted among all the faculty and postgraduate students of two dental colleges in Moradabad, Uttar Pradesh. The responses were assessed on 5-...
McNamara, C M
This case report reviews the variability of dental eruption and the possible sequelae. Dental eruption of the permanent teeth in cleft palate children may be variable, with delayed eruption the most common phenomenon. A case of premature dental eruption of a maxillary left first premolar is demonstrated, however, in a five-year-old male. This localized premature dental eruption anomaly was attributed to early extraction of the primary dentition, due to caries.
Divaris, Kimon; Lai, Caroline S; Polychronopoulou, Argy; Eliades, Theodore; Katsaros, Christos
Stress and burnout have been well-documented in graduate medical and undergraduate dental education, but studies among dental graduate students and residents are sparse. The purpose of this investigation was to examine perceived stressors and three dimensions of burnout among dental residents enrolled in the University of Bern, Switzerland. Thirty-six residents enrolled in five specialty programmes were administered the Graduate Dental Environment Stress (GDES30) questionnaire and the Maslach...
Horvath, Zsuzsa; O'Donnell, Jean A; Johnson, Lynn A; Karimbux, Nadeem Y; Shuler, Charles F; Spallek, Heiko
This research project was part of a planned initiative at the University of Pittsburgh School of Dental Medicine to incorporate lecture recordings as standard educational support technologies. The goal of an institutional survey was 1) to gather current data about how dental educators across the United States and Canada use lecture recordings; 2) determine dental educators' perceived value and outcomes of using lecture recordings; and 3) develop recommendations based on #1 and #2 for the dental education community. Of the sixty-six North American dental schools at the time of the study, forty-five schools responded to the survey, for a 68 percent response rate. Of the respondents, twenty-eight schools were found to currently conduct lecture recording; these comprised the study sample. This study focused on the dental schools' past experiences with lecture recording; thus, those not currently engaged in lecture recording were excluded from further analysis. The survey questions covered a wide range of topics, such as the scope of the lecture recording, logistics, instructional design considerations, outcomes related to student learning, evaluation and reception, barriers to lecture recording, and issues related to copyright and intellectual property. The literature review and results from the survey showed that no common guidelines for best practice were available regarding lecture recordings in dental education. The article concludes with some preliminary recommendations based on this study.
Anderson, Vivienne R; Pang, Lilian C Y; Aarts, John M
Under the 2003 Health Practitioners Competence Assurance (HPCA) Act, New Zealand registered dental technicians are subject to mandatory Continuing Professional Development (CPD) requirements. Internationally, little published literature has examined dental technicians' perspectives of CPD and CPD needs, and there is no published literature relating to the New Zealand context. Available research highlights the importance of CPD for maintaining high professional standards, ensuring patient safety, allowing dental technicians to keep abreast of current research and technological advances, fostering peer networks, and promoting job satisfaction. In 2009, an online open-ended questionnaire was developed to examine New Zealand dental and clinical dental technicians' perspectives of CPD and their perceived CPD needs. In total, 45 New Zealand registered dental technicians responded. Questionnaire responses provided rich qualitative insights into dental technicians' wide-ranging perceptions of CPD, factors that make CPD involvement more or less difficult and more or less desirable, and ways in which CPD access and relevance might be improved. This paper discusses the survey findings in the light of the existing literature on CPD and in relation to the unique New Zealand regulatory environment. It highlights the factors which respondents identified as shaping their CPD decisions, barriers to CPD engagement, perceived CPD needs, suggestions as to how the current CPD system could be improved, and areas for future research.
Saxena, Payal; Gupta, Saurabh Kumar; Mehrotra, Divya; Kamthan, Shivam; Sabir, Husain; Katiyar, Pratibha; Sai Prasad, S V
Education has largely been digitalized. More so, for professional education, keeping updated in this fast paced world has become a necessary requisite and dentistry has not been left untouched. This cross sectional questionnaire based study aimed to assess the digital literacy and smartphone usage amongst the 260 Central Indian dental students including their perspicacity about smartphone/internet usage for learning purposes. The students' attitude for implementation of digital technology in study programs/education system was also evaluated. The questionnaire was distributed among total 260 dental students from different dental institutes of Central India. The data was collected and analyzed using SPSS software. Out of 260 students, 250 were internet users, out of which 56% had internet access all time. 94.23% students owned a smartphone. 46.53% (114/245) students had some app related to the dentistry in their smartphone device. The commonest site for surfing related to knowledge seeking was google scholar (72%) followed by Pubmed and others. Nearly 80% dental students believed that social media helps them in their professional course studies. Post graduate students showed statistitically significant difference from undergraduates and interns in terms of knowledge of keywords, dental apps and reading research journals. 89.23% students were keen for implementation of e-learning in their curriculum. This study reflects willingness of dental students to adopt digital revolution in dental education which in turn may present an opportunity for educators and policy makers to modify educational methods and thereby advance student's current learning approaches.
Evans, Lorraine; Hanes, Philip J
Teaching cultural competence is now an educational requirement for U.S. dental curricula to meet 2013 accreditation standards. The question now is, given time restrictions, limited resources, and budget constraints faced by the majority of dental schools, how can they provide effective cultural competency education to prepare future dental professionals? An additional concern regarding instruction is the recent focus on techniques to engage Millennial learners since this generation is characterized as technologically savvy with a preference for multimedia and general dislike of traditional lectures. With these issues in mind, Georgia Regents University developed Healthy Perspectives, an online, interactive course in cultural competence designed to engage Millennial students. Both before and after the course, the students were asked to complete a modified version of the Clinical Cultural Competency Questionnaire. Of the eighty-eight students in the course (eighty-one first-year dental students and seven entering radiology students), seventy-one completed the questionnaire both before and after the course, for an 81 percent response rate. Seventy-five students also completed the course evaluation. The pre and post questionnaires showed statistically significant gains for students across the four primary areas of self-awareness, knowledge, attitudes, and skills. Student evaluations of the course were generally positive, particularly regarding content, but somewhat surprisingly their assessment of the interactive components (which were designed to meet generational expectations) was ambivalent.
Serbin, J.; Bauer, T.; Fallnich, C.; Kasenbacher, A.; Arnold, W. H.
There is a proven potential of femtosecond lasers for medical applications like cornea shaping , ear surgery or dental surgery . Minimal invasive treatment of carious tissue has become an increasingly important aspect in modern dentistry. State of the art methods like grinding using turbine-driven drills or ablation by Er:YAG lasers  generate mechanical and thermal stress, thus generating micro cracks of several tens of microns in the enamel . These cracks are starting points for new carious attacks and have to be avoided for long term success of the dental treatment. By using femtosecond lasers (1 fs=10 -15 s) for ablating dental tissue, these drawbacks can be overcome. We have demonstrated that femtosecond laser ablation offers a tool for crack-free generation of cavities in dental tissue. Furthermore, spectral analysis of the laser induced plasma has been used to indicate carious oral tissue. Our latest results on femtosecond laser dentistry will be presented, demonstrating the great potential of this kind of laser technology in medicine.
Grenoble, D. E.; Knoell, A. C.
The human need for safe and effective dental implants is well-recognized. Although many implant designs have been tested and are in use today, a large number have resulted in clinical failure. These failures appear to be due to biomechanical effects, as well as biocompatibility and surgical factors. A unified approach is proposed using multidisciplinary systems technology, for the study of the biomechanical interactions between dental implants and host tissues. The approach progresses from biomechanical modeling and analysis, supported by experimental investigations, through implant design development, clinical verification, and education of the dental practitioner. The result of the biomechanical modeling, analysis, and experimental phases would be the development of scientific design criteria for implants. Implant designs meeting these criteria would be generated, fabricated, and tested in animals. After design acceptance, these implants would be tested in humans, using efficient and safe surgical and restorative procedures. Finally, educational media and instructional courses would be developed for training dental practitioners in the use of the resulting implants.
Ma, Kuen Wai; Wong, Hai Ming; Mak, Cheuk Ming
Occupational noise is unavoidably produced from dental equipment, building facilities, and human voices in the dental environment. The purpose of this study was to investigate the effect of occupational noise exposure on the dental professionals’ health condition. The psychoacoustics approach noise exposure assessment followed by the health risk assessment was carried on at the paediatric dentistry clinic and the dental laboratory in the Prince Philip Dental Hospital of Hong Kong. The A-weigh...
Feng, Xue; Sambamoorthi, Usha; Wiener, R. Constance
Objectives There is considerable variation in dental services utilization across Appalachian counties, and a plausible explanation is that individuals in some geographical areas do not utilize dental care due to dental workforce shortage. We conducted an ecological study on dental workforce availability and dental services utilization in Appalachia. Methods We derived county-level (n = 364) data on demographic, socio-economic characteristics and dental services utilization in Appalachia from the 2010 Behavioral Risk Factor Surveillance System (BRFSS) using person-level data. We obtained county-level dental workforce availability and physician-to-population ratio estimates from Area Health Resource File, and linked them to the county-level BRFSS data. The dependent variable was the proportion using dental services within the last year in each county (ranging from 16.6% to 91.0%). We described the association between dental workforce availability and dental services utilization using ordinary least squares regression and spatial regression techniques. Spatial analyses consisted of bivariate Local Indicators of Spatial Association (LISA) and geographically weighted regression (GWR). Results Bivariate LISA showed that counties in the central and southern Appalachian regions had significant (p dental workforce availability, low percent dental services utilization). GWR revealed considerable local variations in the association between dental utilization and dental workforce availability. In the multivariate GWR models, 8.5% (t-statistics >1.96) and 13.45% (t-statistics >1.96) of counties showed positive and statistically significant relationships between the dental services utilization and workforce availability of dentists and dental hygienists, respectively. Conclusions Dental workforce availability was associated with dental services utilization in the Appalachian region; however, this association was not statistically significant in all counties. The findings suggest
Khojastepour, L; Zareifar, S; Ebrahimi, M
Background This cross sectional study was performed to evaluate dental ages and incidence of dental anomalies in children treated for acute lymphoblastic leukemia (ALL). Methods and materials A total of 25 ALL patient who passed at least 2 years of chemotherapy and 25 healthy sex and age matched children were evaluated. Dental age as well as dental anomalies in shape, size, number, and structure was recorded based on their panoramic radiographies which were taken for dental purposes. Results ...
Baginska, Joanna; Wilczynska-Borawska, Magdalena
Almost one fourth of traumatic dental injuries occur at schools or in their surroundings. Prevalence of tooth avulsion varies from 0.5% to 16% of all cases of dental trauma. Children with dental avulsion may seek help from school nurses so they should be able to provide first-aid treatment. However, many studies showed that the general level of…
Cameron, Cheryl A.; Beemsterboer, Phyllis L.; Johnson, Lynn A.; Mislevy, Robert J.; Steinberg, Linda S.; Breyer, F. Jay
As part of the development of a scoring algorithm for a simulation-based dental hygiene initial licensure examination, this effort conducted a task analysis of the dental hygiene domain. Broad classes of behaviors that distinguish along the dental hygiene expert-novice continuum were identified and applied to the design of nine paper-based cases…
Gambhir, Ramandeep Singh; Brar, Prabhleen; Singh, Gurminder; Sofat, Anjali; Kakar, Heena
Oral health has a significant impact on the quality of life, appearance, and self-esteem of the people. Preventive dental visits help in the early detection and treatment of oral diseases. Dental care utilization can be defined as the percentage of the population who access dental services over a specified period of time. There are reports that dental patients only visit the dentist when in pain and never bother to return for follow-up in most cases. To improve oral health outcomes an adequate knowledge of the way the individuals use health services and the factors predictive of this behavior is essential. The interest in developing models explaining the utilization of dental services has increased; issues like dental anxiety, price, income, the distance a person had to travel to get care, and preference for preservation of teeth are treated as barriers in regular dental care. Published materials which pertain to the use of dental services by Indian population have been reviewed and analyzed in depth in the present study. Dental surgeons and dental health workers have to play an adequate role in facilitating public enlightenment that people may appreciate the need for regular dental care and make adequate and proper use of the available dental care facilities. PMID:24082719
Background: Information on the pattern of dental anxiety management in Nigeria is currently not available. Aim: The study was designed to determine the awareness and frequency of application of dental anxiety assessment questionnaires as well as the current pattern in the management of dental anxiety in Nigeria.
Background: Procedure‑related and patient‑related factors influence the prognosis of dental implants to a major extent. Hence, we aimed to evaluate and analyze various systemic factors in patients receiving dental implants. Materials and Methods: Fifty‑one patients were included in the study, in which a total of 110 dental ...
Jager, D.H.J.; Amaechi, B.T.
Dental erosion is one of the most common dental diseases and it is a growing problem. Numerous epidemiological studies have investigated the prevalence of dental erosion. For these studies different cross sections of the population are investigated. Large differences were found between countries,
Full Text Available Tissue engineering is amongst the latest exciting technologies having impacted the field of dentistry. Initially considered as a futuristic approach, tissue engineering is now being successfully applied in regenerative surgery. This article reviews the important determinants of tissue engineering and how they contribute to the improvement of wound healing and surgical outcomes in the oral region. Furthermore, we shall address the clinical applications of engineering involving oral and maxillofacial surgical and periodontal procedures along with other concepts that are still in experimental phase of development. This knowledge will aid the surgical and engineering researchers to comprehend the collaboration between these fields leading to extounding dental applications and to ever-continuing man-made miracles in the field of human science.
Caries, or the decay of teeth are difficult to automatically detect in dental radiographs because of the small area of the image that is occupied by the decay. Images of dental radiographs has distinct regions of homogeneous gray levels, and therefore naturally lead to a segmentation based automatic caries detection algorithm. This paper describes a method for caries detection based on a multiclass, area independent thresholding and segmenting scheme. This multiclass thresholding algorithm is an extension of the uniform error threshold, an area independent, distribution free thresholding method used for images of only two classes of objects. The authors first consider the problem of caries detection and the image features that characterize the presence of caries. Next, the uniform error threshold is reviewed, and the general multiclass uniform error threshold algorithm is presented. This algorithm is used to automatically detect caries in dental radiographs
Elias, Carlos Nelson; Meirelles, Luiz
In the beginning of implantology, the procedures adopted for treating patients were performed in two surgical phases with an interval of 3-6 months. Nowadays, it is possible to insert and load a dental implant in the same surgical procedure. This change is due to several factors, such as improvement of surgical technique, modifications of the implant design, increased quality of implant manufacturing, development of the surgical instruments' quality, careful patient screening and adequate treatment of the implant surface. The clinical results show that adequate treatment of surfaces is crucial for reducing healing time and treating at-risk patients. The surface properties of dental implants can be significantly improved at the manufacturing stage, affecting cells' activity during the healing phase that will ultimately determine the host tissue response, a fundamental requirement for clinical success. This review focuses on different types of dental implant surfaces and the influence of surface characteristics on osseointegration.
Sabbatani, Sergio; Fiorino, Sirio
During human evolution, the period in which groups of humans stopped harvesting fruits and seeds growing wild and introduced the cultivation of cereals as well as the domestication of animals represents a very important event. This circumstance had a considerable impact on human pathocenosis, increasing the risk of infectious diseases of animal origin. The aim of this review was to summarise the archaeological and palaeo-pathological evidence in the literature concerning this topic. Starting from early prehistory (about 1.5 million years ago) up to the historical period, several authors have described the changes in human habits and the consequent changes in food supply, leading to the transition from a protein- to a carbohydrate-rich diet across a broad interval of time. This led to additional problems for human health. The increased accumulation of carbohydrate debris in the odonto-stomatological apparatus, without the appropriate use of hygiene in the oral cavity, increased the risk of infectious disease involving the mouth. Therefore, since the Neolithic period there has been a higher risk of tooth caries, abscesses, deep infection of the teeth roots, reaching also the mandibular and maxillary bone. Several hypotheses have been proposed by the distinct civilizations, which have alternated in the different ages, to explain the cause of these human health problems, including the idea that a "dental worm" could be involved in this process, such as in the Sumerian period. We describe and discuss further modifications of this theory, developed in Egypt, Assyria, Babylon, China, Greece, in Etruscan cities and in Rome in ancient times as well as in the Middle Ages, and the evolution of scientific thought on this topic in the past 300 years. In addition, the results of some palaeo-pathological studies, which were performed on human remains, such as the maxillary bone and teeth, mainly in different geographical areas in Italy, are examined and reported.
Rustemeyer, P.; Eich, H.T.; John-Mikolajewski, V.; Mueller, R.D.
Purpose: The intention of this study was to reduce patient dose during dental CT in the planning for osseointegrated implants. Methods and Materials: Dental CTs were performed with a spiral CT (Somatom Plus 4, Siemens) and a dental software package. Use of the usual dental CT technique (120 kVp; 165 mA, 1 s rotation time, 165 mAs; pitch factor 1) was compared with a new protocol (120 kVp; 50 mA; 0.7 s rotation time; 35 mAs; pitch factor 2) which delivered the best image quality at the lowest possible radiation dose, as tested in a preceding study. Image quality was analysed using a human anatomic head preparation. Four radiologists analysed the images independently. A Wilcoxon rank pair-test was used for statistic evaluation. The doses to the thyroid gland, the active bone marrow, the salivary glands, and the eye lens were determined in a tissue-equivalent phantom (Alderson-Rando Phantom) with lithium fluoride thermoluminescent dosimeters at the appropriate locations. Results: By mAs reduction from 165 to 35 and using a pitch factor of 2, the radiation dose could be reduced by a factor of nine (max.) (e.g., the bone marrow dose could be reduced from 23.6 mSv to 2.9 mSv, eye lens from 0.5 mSv to 0.3 mSv, thyroid gland from 2.5 mSv to 0.5 mSv, parotid glands from 2.3 mSv to 0.4 mSv). The dose reduction did not lead to an actual loss of image quality or diagnostic information. Conclusion: A considerable dose reduction without loss of diagnostic information is achievable in dental CT. Dosereducing examination protocols like the one presented may further expand the use of preoperative dental CT. (orig.) [de
Tapie, Laurent; Lebon, Nicolas; Mawussi, Bernardin; Fron-Chabouis, Hélène; Duret, Francois; Attal, Jean-Pierre
As is the case in the field of medicine, as well as in most areas of daily life, digital technology is increasingly being introduced into dental practice. Computer-aided design/ computer-aided manufacturing (CAD/CAM) solutions are available not only for chairside practice but also for creating inlays, crowns, fixed partial dentures (FPDs), implant abutments, and other dental prostheses. CAD/CAM dental practice can be considered as the handling of devices and software processing for the almost automatic design and creation of dental restorations. However, dentists who want to use dental CAD/CAM systems often do not have enough information to understand the variations offered by such technology practice. Knowledge of the random and systematic errors in accuracy with CAD/CAM systems can help to achieve successful restorations with this technology, and help with the purchasing of a CAD/CAM system that meets the clinical needs of restoration. This article provides a mechanical engineering viewpoint of the accuracy of CAD/ CAM systems, to help dentists understand the impact of this technology on restoration accuracy.
Jacobson, I.; Gamboa, I.; Espinosa, G.; Moreno, A.
There are many reports of high uranium concentration in dental ceramics, so they require to be controlled. The SSNTD is an optional method to determine the uranium concentration. In this work the analysis of several commercial dental ceramics used regularly in Mexico by dentists is presented. The chemical and electrochemical processes are used and the optimal conditions for high sensitivity are determined. CR-39 (allyl diglycol polycarbonate) was used as detector. The preliminary results show some materials with high uranium concentrations. Next step will be the analysis of equivalent dose and the effects in the public health. (author)
Gonchukov, S.; Biryukova, T.; Sukhinina, A.; Vdovin, Yu
This work is devoted to the optimization of fluorescence dental calculus diagnostics in optical spectrum. The optimal wavelengths for fluorescence excitation and registration are determined. Two spectral ranges 620 - 645 nm and 340 - 370 nm are the most convenient for supra- and subgingival calculus determination. The simple implementation of differential method free from the necessity of spectrometer using was investigated. Calculus detection reliability in the case of simple implementation is higher than in the case of spectra analysis at optimal wavelengths. The use of modulated excitation light and narrowband detection of informative signal allows us to decrease essentially its diagnostic intensity even in comparison with intensity of the low level laser dental therapy.
Intended to be complementary to the more comprehensive document, ''Code of Practice for the protection of persons against ionizing radiations arising from medical and dental use'' (CIS 74-423), the purpose of this booklet is to give dentists some basic information on the safe use of X-rays. Contents: why protection from X-rays; responsibility for radiation protection; protection during a dental examination; ensuring a safe installation; sources of further information. Appendices: maximum permissible doses; useful addresses; summary of relevant recommendations from the Code of Practice; notes on film processing.
Jozani, F.; Parnianpour, H.
In considering the special provisions required in dental radiography, investigations were conducted in Iran. Radiation dose levels in dental radiography were found to be high. Patient exposure from intraoral radiographic examination was calculated, using 50kV X-ray. Thermoluminescent dosimeters were fastened to the nasion, eyes, lip, philtrum, thyroid, gonads and to the right and left of the supra-orbital, infra-orbital temporomandibular joints of live patients. The highest exposure value was for the lower lip. Recommendations concerning educational training and protection of staff and patients were included
Full Text Available The current study was aimed to fabricate customized root form dental implant using additive manufacturing technique for the replacement of missing teeth. The root form dental implant was designed using Geomagic™ and Magics™, the designed implant was directly manufactured by layering technique using ARCAM A2™ electron beam melting system by employing medical grade Ti–6Al–4V alloy powder. Furthermore, the fabricated implant was characterized in terms of certain clinically important parameters such as surface microstructure, surface topography, chemical purity and internal porosity. Results confirmed that, fabrication of customized dental implants using additive rapid manufacturing technology offers an attractive method to produce extremely pure form of customized titanium dental implants, the rough and porous surface texture obtained is expected to provide better initial implant stabilization and superior osseointegration.
Beil, Heather; Rozier, R Gary; Preisser, John S; Stearns, Sally C; Lee, Jessica Y
We determined the association between timing of a first dentist office visit before age 5 years and dental disease in kindergarten. We used North Carolina Medicaid claims (1999-2006) linked to state oral health surveillance data to compare caries experience for kindergarten students (2005-2006) who had a visit before age 60 months (n=11,394) to derive overall exposure effects from a zero-inflated negative binomial regression model. We repeated the analysis separately for children who had preventive and tertiary visits. Children who had a visit at age 37 to 48 and 49 to 60 months had significantly less disease than children with a visit by age 24 months (incidence rate ratio [IRR]=0.88; 95% confidence interval [CI]=0.81, 0.95; IRR=0.75; 95% CI=0.69, 0.82, respectively). Disease status did not differ between children who had a tertiary visit by age 24 months and other children. Medicaid-enrolled children in our study followed an urgent care type of utilization, and access to dental care was limited. Children at high risk for dental disease should be given priority for a preventive dental visit before age 3 years.
Mar 6, 2017 ... methods used for diagnosis and treatment of dental caries can exhibit considerable differences. Oral health markedly contributes to the maintenance of general health and ..... may be attributed to the deterioration of eye function with the advanced ... meticulous visual examination of a dry tooth and the lack.
Baum, Bruce J.; And Others
A program in one of the National Institutes of Health offers clinical training fellowships as a means of training potential dental school faculty by providing both unique clinical skills and high-quality research experience. The program was developed in response to a perceived need for change in academic dentistry. (MSE)
Srivastava, Preety; Chen, Gang; Harris, Anthony
This study uses data from the 2004-2006 Australian National Survey of Adult Oral Health and a simultaneous equation framework to investigate the interrelationships between dental health, private dental insurance and the use of dental services. The results show that insurance participation is influenced by social and demographic factors, health and health behaviours. In turn, these factors affect the use of dental services, both directly and through insurance participation. Our findings confirm that affordability is a major barrier to visiting the dentist for oral health maintenance and treatment. Our results suggest that having supplementary insurance is associated with some 56 percentage points higher probability of seeing the dentist in the general population. For those who did not have private insurance cover, we predict that conditional on them facing the same insurance conditions, on average, having insurance would increase their visits to the dentist by 43 percentage points. The uninsured in the survey have lower income, worse oral health and lower rates of preventive and treatment visits. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.
Lee, M-Y; Chang, C-C; Ku, Y C
Fixed dental restoration by conventional methods greatly relies on the skill and experience of the dental technician. The quality and accuracy of the final product depends mostly on the technician's subjective judgment. In addition, the traditional manual operation involves many complex procedures, and is a time-consuming and labour-intensive job. Most importantly, no quantitative design and manufacturing information is preserved for future retrieval. In this paper, a new device for scanning the dental profile and reconstructing 3D digital information of a dental model based on a layer-based imaging technique, called abrasive computer tomography (ACT) was designed in-house and proposed for the design of custom dental restoration. The fixed partial dental restoration was then produced by rapid prototyping (RP) and computer numerical control (CNC) machining methods based on the ACT scanned digital information. A force feedback sculptor (FreeForm system, Sensible Technologies, Inc., Cambridge MA, USA), which comprises 3D Touch technology, was applied to modify the morphology and design of the fixed dental restoration. In addition, a comparison of conventional manual operation and digital manufacture using both RP and CNC machining technologies for fixed dental restoration production is presented. Finally, a digital custom fixed restoration manufacturing protocol integrating proposed layer-based dental profile scanning, computer-aided design, 3D force feedback feature modification and advanced fixed restoration manufacturing techniques is illustrated. The proposed method provides solid evidence that computer-aided design and manufacturing technologies may become a new avenue for custom-made fixed restoration design, analysis, and production in the 21st century.
Full Text Available This article review specific clinical issues of the molar teeth, as well as the therapeutic approach of their pathology. The dental pathology we face in the group of molars is related to: dental caries, dental trauma (crown and crown-root fractures, dental wear phenomena. The therapeutic approach of the molar teeth is represented by: restoration of the loss of hard dental tissues; endodontic treatments of pulpal and periapical complications; surgical treatment. The restorative treatments in molars are: direct restorations, with or without supplementary anchorage for obturations; inlay, onlay; prosthetic crown.
Alrqiq, Hosam M; Edelstein, Burton L
Dentistry is increasingly challenged by payers and the public to demonstrate quality measurement (QM) activities that substantiate value. Unknown is how various components of the US oral health-care financing and delivery systems have adopted QM. The objective of this study is to explore QM activities by US dental delivery, management, financing, and related organizations. Using a structured interview guide based on a novel conceptual framework that incorporates factors influencing QM intention, adoption, and implementation, 19 key informant interviews were conducted. Informants represented safety net delivery programs (health center, nonprofit mobile, hospital-based, Veterans Administration, and tribal dental programs), private delivery organizations (private practice, closed panel HMO, and for-profit mobile dental programs), training programs that deliver care (dental and dental therapy programs), management organizations (private and Medicaid group practice management companies), care financing organizations (Medicaid managed care plan, state Medicaid program, dental benefits companies), and dental quality organizations (institute and dental professional organization). Interviews were transcribed and analyzed qualitatively. Informants report wide variation in the intensity of QM efforts with organizational leadership cited as most influential. Motivation to adopt QM efforts is more often internal than imposed. Data management and information technology both facilitate and limit QM activities. QM activities are associated with operational improvements including use of guidelines and refinements of mission. Organizational type and size appear to influence QM programs. The current status of QM is highly variable across dental organizations because organizational leadership, needs, and requirements vary according to mission and structure. © 2015 American Association of Public Health Dentistry.
Northridge, Mary E.; Birenz, Shirley; Gomes, Danni; Golembeski, Cynthia A.; Greenblatt, Ariel Port; Shelley, Donna; Russell, Stefanie L.
Purpose There is a need for research to facilitate the widespread implementation, dissemination, and sustained utilization of evidence-based primary care screening, monitoring, and care coordination guidelines, thereby increasing the impact of dental hygienists’ actions on patients’ oral and general health. The aims of this formative study are to: (1) explore dental hygienists’ and dentists’ perspectives regarding the integration of primary care activities into routine dental care; and (2) assess the needs of dental hygienists and dentists regarding primary care coordination activities and use of information technology to obtain clinical information at chairside. Methods This qualitative study recruited ten hygienists and six dentists from ten New York City area dental offices with diverse patient mixes and volumes. A New York University faculty hygienist conducted semi-structured, in-depth interviews, which were digitally recorded and transcribed verbatim. Data analysis consisted of multilevel coding based on the Consolidated Framework for Implementation Research, resulting in emergent themes with accompanying categories. Results The dental hygienists and dentists interviewed as part of this study fail to use evidence-based guidelines to screen their patients for primary care sensitive conditions. Overwhelmingly, dental providers believe that tobacco use and poor diet contribute to oral disease, and report using electronic devices at chairside to obtain web-based health information. Conclusion Dental hygienists are well positioned to help facilitate greater integration of oral and general health care. Challenges include lack of evidence-based knowledge, coordination between dental hygienists and dentists, and systems-level support, with opportunities for improvement based upon a theory-driven framework. PMID:27340183
Jairo A. Ruiz C
Full Text Available This article is a product from the project “Environmental Management of Dental Amalgam in the State of Antioquia” which was carried out by the following research groups belonging to the University of Antioquia: Science and Biomedical Technology, Precious Materials, and Pirometallurgical and Materials Researches, as well as the private company New Stetic S. A., between February 2005 and February 2007. Objective: to describe the environmental conditions in 30 big dental offices of the State of Antioquia, Colombia. Those dental offices having more than five dental chairs in the same work place were defined as “big” for the purpose of this project. Due to the fact that these dental offices represents 85% of the population of reference, the results described in this article can be consequently considered as is they were derived from a census. The description is made bearing in mind the people who are exposed to the risk of mercury contamination due to their occupation. Materials and method: an observation tool was designed in order to be applied in each dental office. It contained aspects as floor and wall characteristics, ventilation, room temperature, storing place for mercury, elements for handling amalgam scraps, and those activities which deviate from the regular dental service in the same site. Each dental office was visited by a research engineer and an advanced engineering student on a previously defined date. The researchers were trained in advance to collect the information. Results: it was found that some big dental offices have inadequate conditions in their premises for offering their services, and do not have a good handling of the environmental conditions. That’s why immediate actions are mandatory to minimize the risk of mercury contamination.
Luís, H S; Morgado, I; Assunção, V; Bernardo, M F; Leroux, B; Martin, M D; DeRouen, T A; Leitão, J
Dental hygiene activities were developed as part of a randomized clinical trial designed to assess the safety of low-level mercury exposure from dental amalgam restorations. Along with dental-hygiene clinical work, a community programme was implemented after investigators noticed the poor oral hygiene habits of participants, and the need for urgent action to minimize oral health problems in the study population. Clinical and community activity goal was to promote oral health and prevent new disease. Community activities involved participants and their fellow students and were aimed at providing education on oral health in a school environment. Dental hygienists developed clinical work with prophylaxis, sealants application and topical fluoride and implemented the community programme with in-class sessions on oral health themes. Twice a month fluoride mouthrinses and bi-annual tooth brushing instructional activity took place. Participation at dental-hygiene activities, sealed teeth with no need of restoration and dental-plaque-index were measures used to evaluate success of the programme for the participants. Improvement in dental hygiene is shown by the decrease in dental plaque index scores (P dental hygiene activities. Teachers became aware of the problem and included oral-health in school curricula. Dental hygiene activities have shown to be helpful to promote dental hygiene, promote oral health and to provide school-age children with education on habits that will be important for their future good health.
Friedman, Jay W; Nash, David A; Mathu-Muju, Kavita R
The Virtual Dental Home is a concept of the Pacific Center for Special Care of the Arthur A. Dugoni School of Dentistry in San Francisco. It is designed to improve access to dental care for underserved populations, specifically children and institutionalized adults. This article describes the development and implementation of the Virtual Dental Home, subsequently critiquing the concept. The criteria for a dental home are not met by the program. It is the equivalent of a traditional public oral health prevention and screening program, with the additional dimension of allowing dental hygienists and assistants to place interim glass ionomer restorations in dental cavities. The critique questions the need to insert a "cloud" dentist into the process. The routine utilization of radiographs is also challenged. The VDH not only lacks the attributes of a dental home, it has not been shown to be as efficient and effective as traditional programs staffed by dental hygienists and dental therapists. The article concludes by describing how programs utilizing dental therapists could address the deficiencies of the Virtual Dental Home, effectively improving access to oral health care for underserved populations. © 2017 American Association of Public Health Dentistry.
Wadhwa, Puneet; Yu, Qingzhao; Zhu, Han; Townsend, Janice A
The purpose of this study was to determine if changes in dental development are associated with Attention Deficit Hyperactivity Disorder (ADHD) or ADHD medications. This retrospective chart review evaluated the dental age of 128 patients between 6 and 16 years of age using the Demirjian method from the following two groups a) children with ADHD b) unaffected children. The ADHD group was further stratified into four groups according to the medication type. The impact of ADHD on dental age difference (the difference between dental age and chronologic age) was analyzed using T-test and the association between medication type and dental age difference was analyzed through one way ANOVA. The mean difference between estimated dental age and chronologic age (dental age difference) for all subjects was 0.80 years. There was no significant dental age difference in subjects with ADHD and the control group (0.78±1.28vs. 0.84 ±1.09 years respectively; P=0.75) and there was no significant difference in dental age difference and type of medication (P=0.84). No significant difference was found between children with ADHD and unaffected children with respect to dental age difference. No significant differences were found in dental age difference in the four medication groups.
Dental radiographs are critical for the complete assessment and treatment of dental diseases. Dental radiography is commonly used to evaluate congenital dental defects, periodontal disease, orthodontic manipulations, oral tumors, endodontic treatments, oral trauma, and any situation where an abnormality is suspected. Although standard radiographic equipment and film can be used to produce dental radiographs, dental X-ray equipment and film provide superior quality images and greater convenience of animal patient positioning. An understanding of normal dental radiographic anatomy is important when interpreting dental radiographs. Stage III periodontitis is the earliest stage of periodontal disease at which radiographic abnormalities become apparent. Bone loss associated with periodontal disease can be classified as either horizontal or vertical. Periapical radiolucencies can represent granulomas, cysts, or abscesses, whereas periapical radiodensities may represent sclerotic bone or condensing osteitis. Lytic lesions of the bone of the jaw often represent oral neoplasms. Neoplasms also can displace or disrupt teeth in the dental arch. Resorptive lesions can be external or internal and appear as radiolucent areas involving the external surface of the root or the pulp cavity, respectively. Feline dental resorptive lesions, also known as odontoclastic resorptions, are a specific form of dental resorptive lesions unique to cats
Wall, Thomas P; Brown, L Jackson
This article describes recent trends in dental visits and private dental insurance in the United States. This study is based on the analyses of data regarding dental visits and private dental insurance among the population 2 years of age or older from the 1989 and 1999 National Health Interview Surveys. Overall, the percentage of the population with a dental visit rose from 57.2 percent in 1989 to 64.1 percent in 1999, while the percentage with private dental insurance fell from 40.5 percent to 35.2 percent. Although a higher percentage of people with private dental insurance reported having a dental visit than did those without private dental insurance in both years, the increase from 1989 to 1999 in the percentage of those with a visit was larger among the uninsured. If this trend persists, a smaller portion of practicing dentist's clientele will be insured. This may affect demand for services, as well as front office operations.
Imura, Masataka; Kuroda, Yoshihiro; Oshiro, Osamu; Kuroda, Tomohiro; Kagiyama, Yoshiyuki; Yagi, Masakazu; Takada, Kenji; Azuma, Hiroko
Three-dimensional volume data set is useful for diagnosis in dental treatments. However, to obtain three-dimensional images of a dental arch in general dental clinics is difficult. In this paper, we propose a method to reconstruct pseudo three-dimensional dental images from a dental panoramic radiograph and a tooth surface shape which can be obtained from three dimensional shape measurement of a dental impression. The proposed method finds an appropriate curved surface on which the dental panoramic radiograph is mapped by comparing a virtual panoramic image made from a tooth surface shape to a real panoramic radiograph. The developed pseudo three-dimensional dental images give clear impression of patient's dental condition. (author)
Beltrán-Neira, Roberto J; Beltrán-Aguilar, Eugenio D
The objective of this article is to propose a classification of dental competencies. Interest in dental competencies has grown consistently during the last three decades. However, the dental education literature suggests that the term "competency" is understood and used differently by dental schools around the world. The taxonomic classification of dental competencies we propose follows a systematic approach starting at the highest level of complexity, i.e., the professional profile the teaching institution envisions for its graduates, and following in a decreasing degree of complexity to competency function, task, step, movement, and moment. This taxonomy has proved to be useful for more than thirty years in the Dental School of the Peruvian University Cayetano Heredia. Graduates of this school are successful practitioners, teachers, and researchers in Peru and other countries. The classification proposed here should clarify terms, facilitate curriculum design and learning assessment, stimulate further discussion on the matter, and facilitate communication among the dental education establishment.
Marion, Ian W; Nelson, Travis M; Sheller, Barbara; McKinney, Christy M; Scott, JoAnna M
To investigate caregivers' preference regarding dental stories to prepare children with autism for dental visits. Caregivers of children with autism were allowed use of dental stories available via different media (paper, tablet computer, computer) and image types (comics or drawings, photographs, video). Caregivers completed pre- and postintervention surveys. Fisher's exact tests were used to determine associations between predictive factors and preferences. Forty initial and 16 follow-up surveys were completed. Subjects were primarily male (85%). Mean child age was 6.7 years. Nine (64%) caregivers found the dental story useful for themselves and their child. Two (14%) caregivers found the aid only helpful for themselves. Preferred media type was associated with language understanding (p = .038) and home media preference (p = .002). Practitioners should consider using dental stories to help prepare families and children for dental visits. Individual preferences for dental stories vary; using prior history can aid in selection. © 2016 Special Care Dentistry Association and Wiley Periodicals, Inc.
Singhal, Astha; Chattopadhyay, Amit; Garcia, A Isabel; Adams, Amy B; Cheng, Diana
To examine prenatal dental care needs, utilization and oral health counseling among Maryland women who delivered a live infant during 2001-2003 and identify the factors associated with having a dental visit and having an unmet dental need during pregnancy. Pregnancy Risk Assessment Monitoring System is an ongoing population based surveillance system that collects information of women's attitudes and experiences before, during, and shortly after pregnancy. Logistic regression was used to model dental visits and unmet dental need using predictor variables for Maryland 2001-2003 births. Less than half of all women reported having a dental visit and receiving oral health advice during pregnancy. Twenty-five percent of women reported a need for dental care, of which 33 % did not receive dental care despite their perceived need. Multivariate modeling revealed that racial minorities, women who were not married and those with annual income dental visit. Women who were not married, had low annual income, were older than 40 years of age, had an unintended pregnancy and received prenatal care later than desired were most likely to have an unmet dental need during pregnancy. Despite reported needs and existing recommendations to include oral health as a component of prenatal care, less than half of pregnant women have a dental visit during their pregnancy. One-third of women with a dental problem did not have a dental visit highlighting the unmet need for dental care during pregnancy.
Heyman, Richard E; Slep, Amy M Smith; White-Ajmani, Mandi; Bulling, Lisanne; Zickgraf, Hana F; Franklin, Martin E; Wolff, Mark S
The prevalence and correlates of dental fear have been studied in representative population studies, but not in patients presenting for dental treatment. We hypothesized that dental fear among patients presenting at a large, urban college of dentistry would be similar to that of the population (e.g. 11% high dental fear, 17% to 35% moderate or higher fear) and that fear would be associated with avoidance of routine dental care, increased use of urgent dental care and poor oral health. Participants were 1070 consecutive patients at a large, urban dental care center. All patients completed a clinical interview, including demographics, medical history, dental history and presenting concerns, and behavioral health history. Patients were also asked to rate their dental anxiety/fear on a 1 (none) to 10 (high) scale. Over 20% of patients reported elevated anxiety/fear, of which 12.30% reported moderate and 8.75% high fear. Severity of dental anxiety/fear was strongly related to the likelihood of avoiding dental services in the past and related to myriad presenting problems. As hypothesized, the prevalence of moderate or higher fear in dental patients was considerable and closely matched that found in general population surveys. Thus, the 'dental home' is an ideal location to treat clinically significant dental anxiety/fear.
Full Text Available Abstract Background Microbial denitrification is not considered important in human-associated microbial communities. Accordingly, metabolic investigations of the microbial biofilm communities of human dental plaque have focused on aerobic respiration and acid fermentation of carbohydrates, even though it is known that the oral habitat is constantly exposed to nitrate (NO3- concentrations in the millimolar range and that dental plaque houses bacteria that can reduce this NO3- to nitrite (NO2-. Results We show that dental plaque mediates denitrification of NO3- to nitric oxide (NO, nitrous oxide (N2O, and dinitrogen (N2 using microsensor measurements, 15N isotopic labelling and molecular detection of denitrification genes. In vivo N2O accumulation rates in the mouth depended on the presence of dental plaque and on salivary NO3- concentrations. NO and N2O production by denitrification occurred under aerobic conditions and was regulated by plaque pH. Conclusions Increases of NO concentrations were in the range of effective concentrations for NO signalling to human host cells and, thus, may locally affect blood flow, signalling between nerves and inflammatory processes in the gum. This is specifically significant for the understanding of periodontal diseases, where NO has been shown to play a key role, but where gingival cells are believed to be the only source of NO. More generally, this study establishes denitrification by human-associated microbial communities as a significant metabolic pathway which, due to concurrent NO formation, provides a basis for symbiotic interactions.
Bakhmutov, D; Gonchukov, S; Sukhinina, A
The aim of the present study was to investigate the fluorescence properties of dental calculus in comparison with the properties of adjacent unaffected tooth structure using both lasers and LEDs in the UV-visible range for fluorescence excitation. The influence of calculus color on the informative signal is demonstrated. The optimal spectral bands of excitation and registration of the fluorescence are determined
Bakhmutov, D.; Gonchukov, S.; Sukhinina, A.
The aim of the present study was to investigate the fluorescence properties of dental calculus in comparison with the properties of adjacent unaffected tooth structure using both lasers and LEDs in the UV-visible range for fluorescence excitation. The influence of calculus color on the informative signal is demonstrated. The optimal spectral bands of excitation and registration of the fluorescence are determined.
Stone, J Caitlin; Hannah, Andrew; Nagar, Nathan
Data sourcesMedline, Scopus and Google Scholar.Study selectionTwo reviewers selected studies independently. English language clinical studies assessing the association between temporomandibular disorders (TMD) and features of dental occlusion were considered.Data extraction and synthesisStudy quality was assessed based on the Newcastle-Ottawa Scale (NOS) and a narrative synthesis was presented.ResultsIn all 25 studies (17 case-control, eight comparative) were included. Overall there was a high variability between occlusal features and TMD diagnosis. Findings were consistent with a lack of clinically relevant association between TMD and dental occlusion. Only two studies were associated with TMD in the majority (≥50%) of single variable analyses in patient populations. Only mediotrusive interferences are associated with TMD in the majority of multiple variable analyses.ConclusionsThe findings support the absence of a disease-specific association, there is no ground to hypothesise a major role for dental occlusion in the pathophysiology of TMDs. Dental clinicians are thus encouraged to move forward and abandon the old-fashioned gnathological paradig.
Cohnen, M.; Kemper, J.; Moedder, U.; Moebes, O.; Pawelzik, J.
The aim of this study was to compare radiation exposure in panoramic radiography (PR), dental CT, and digital volume tomography (DVT). An anthropomorphic Alderson-Rando phantom and two anatomical head phantoms with thermoluminescent dosimeters fixed at appropriate locations were exposed as in a dental examination. In PR and DVT, standard parameters were used while variables in CT included mA, pitch, and rotation time. Image noise was assessed in dental CT and DVT. Radiation doses to the skin and internal organs within the primary beam and resulting from scatter radiation were measured and expressed as maximum doses in mGy. For PR, DVT, and CT, these maximum doses were 0.65, 4.2, and 23 mGy. In dose-reduced CT protocols, radiation doses ranged from 10.9 to 6.1 mGy. Effective doses calculated on this basis showed values below 0.1 mSv for PR, DVT, and dose-reduced CT. Image noise was similar in DVT and low-dose CT. As radiation exposure and image noise of DVT is similar to low-dose CT, this imaging technique cannot be recommended as a general alternative to replace PR in dental radiology. (orig.)
is essential for insight into craniofacial syndromes. The dentition, thus, becomes central in diagnostics and evaluation of the pathogenesis. Developmental fields can explore and advance the concept of dental approaches to craniofacial syndromes. Discussion. As deviations in teeth persist and do not reorganize...
Fitzpatrick, J J
Intravenous (IV) access is a valuable skill for dental practitioners in emergency situations and in IV sedation. However, many people feel some apprehension about performing this procedure. This article explains the basic principles behind IV access, and the relevant anatomy and physiology, as well as giving a step-by-step guide to placing an IV cannula.
Washington State Dept. of Social and Health Services, Olympia. Health Manpower Project.
Beginning with a statement on the profession of dental hygiene and the two types of professional preparation available in the field, the pilot study then presents a two-part summary of its findings and an explanation of the methodology employed. Part I of the main portion of the report concerns employment characteristics (status, age, residence,…
This paper is a comment on 'The enigma of dental amalgam' by Carl Leinfelder published in 2004 in the Journal of Esthetic and Restorative Dentistry. In that paper a warning is stated against a too abrupt change from amalgam towards resin composite, because this will bring a lot of clinical problems
Bin, Shi; Hao, Zeng
An increasing number of implant restoration abutment types are produced with the rapid development of dental implantology. Although various abutments can meet different clinical demands, the selection of the appropriate abutment is both difficult and confusing. This article aims to help clinicians select the appropriate abutment by describing abutment design, types, and selection criteria.
... PDF Foods For Healthy Teeth - Amarɨñña / አማርኛ (Amharic) MP3 Office of Oral Health Maryland Department of Health ... PDF Healthy Teeth, Healthy Kids - Amarɨñña / አማርኛ (Amharic) MP3 Maryland Dental Action Coalition Arabic (العربية) Expand Section ...
Radiography and radiographic examination of the patient form most valuable diagnostic tool in providing comprehensive dental care. The safe and effective use of the X-ray equipment is important for the protection of the patient, other members of the public and all members of the dental team. For patients, the risk that is associated with exposure to X-rays must always be weighed against the clinical benefit of an accurate diagnosis. The risks associated with the exposure to the X-rays during the radiographic examination of the patient must be minimised by meticulously adhering to good practice and thus carefully managing the use of dental radiological procedures. The dentist or the personnel who is the license holder for the X-ray equipment is ultimately responsible for the radiation safety at the workplace. One important method in limiting the possible risk of radiation exposure at workplace is the correct design of an X-ray room. This paper is aimed at discussing the guidelines and recommendations on X-ray room designs in dental radiology in order to facilitate radiation control and safe working conditions for radiation workers as well as the public. (author)
Niken Widyanti Sriyono
Full Text Available Globalization including General Agreement on Trade in Services (GATS and Asia Fair Trade Agreement (AFTA are a new free trade system. In globalization era, there will be an intense and free competition in looking for jobs throughout the world. This new system will affect the health services system in which health services tend to follow an industrial model. Meaning that dentistry or dental health services tend to be part of a business system, and this system has caused controversy among the community and the profession itself. The results of the discussion revealed that professional and business of dentistry is compatible and complementary. The tendency of increasing number of legal form of practice (group and a professional corporation and the worldwide advertisement of these practices supported the premise that delivering dental practice tends to follow the industrial model. Dentists should not only more focus on achieving financial success in running the business of practice but profession should have the most concern for the people who seek their services. Delivering quality of dental care depends on the high skill of the dentist and on the satisfactory income for the survival of the practice in the long run, and this make the practice will be viewed by the public and profession as being appropriate and of high quality. Facing the globalization, besides possessing high clinical skill, dentists must have a firm understanding of management concepts and apply them in their practice. In conclusion: The profession and the business of dentistry are compatible and complementary. The delivery of the dental services tends to follow the industrial model, which is a current reality. Dentist should concern more on the delivering high quality of dental services, not only focus on the business of the practice, although the satisfactory income is important for the survival growth of the practice in the long run. It is suggested for dentists to follow as
Clearly, there is ample evidence of adverse effects of radiation in sufficient doses. There is at present no proof of such effects from doses commonly employed in dental practice; however, it has not been possible to prove the absence of such effects. Most experts now agree that there may be a small, difficult to quantify risk of cancer or genetic mutation from diagnostic exposure in patients and in personnel exposed during work. Prudence dictates acceptance of this position until proof to the contrary is available. This report has presented recent attempts to quantify the risk to patients based on speculative calculations and extrapolations. Indices of population risks indicate that medical radiology is the largest source of human-made genetic and leukemogenic radiation burden to the American public. Dental radiology contributes a small-but not necessarily insignificant-portion. Of major concern is the increasing use of radiation for diagnostic purposes in both medicine and dentistry. Technological advances have reduced exposure per examination; presumably this trend will continue so that total exposure of populations to radiation in the healing arts will not increase. Recent analyses suggest that the cancer risk to a patient from a dental radiographic examination is of the order of one in a million; the genetic risk is substantially less, about one in a billion. The risks appear to be essentially equal for full-mouth intraoral and for panoramic examinations. These estimates are numerically quite small, but the effects are severe. Thus, these risks cannot be ignored. However, we currently accept risks of similar magnitude in our daily lives [Table 9]50,51 In addition, the risk of failure to make an accurate diagnosis may be greater than the risk from exposure to the radiation from a justified and properly conducted radiographic examination
M. A. Luchynskyі
I. Y. Horbachevskyy Ternopil State Medical University of Ministry of Health of Ukraine, Ukraine, Ternopil (Ternopil, Maydan Voli, 1, 46001 Abstract The purpose of the work is to study dental health of children living in conditions of combined negative impact of natural and technological factors. Materials and methods. It was performed an epidemiological dental examination of 2,551 children aged 6 to 15 years, who settled in different regions of the Precarpathians, in conditions of iodine and fluoride deficiency (plain - 1087 children, foothills - 730 and mountain - 734 children. Results. Comprehensive epidemiological studies found low levels of dental health of children living in different geochemical and anthropogenic conditions of Ivano-Frankivsk region (48,83 ± 0,36% in the general observation, that is not statistically different by regions examination, moreover girls level is lower, than that of boys in examined regions (48,14 ± 0,50 and (49,51 ± 0,52%, respectively. It was founded, that the main diseases, which contribute to the reduction of dental health in children, is dental caries and its complications and abnormalities of dentoalveolar system. It was found, that the frequency and severity of dentoalveolar abnormalities depend on anthropogenic environmental conditions: in children of plain and foothill regions, that suffer from greater anthropogenic pressure, dentoalveolar abnormalities where found in (67,99 ± 1,42 and (65,21 ± 1,76%, against (45,91 ± 1,84% in children of conditionally pure mountain region. These same children also often recorded more severe pathology – combined anomalies (24,09 ± 1,57 and (22,06 ± 1,90%, against (12,17 ± 1,78%, respectively. It was found the connection between the dentoalveolar abnormalities and the presence of caries (r = + 0,95; p <0,01 and periodontal tissue diseases (r = + 0,79; p <0,05. Keywords: children, dental health, dentoalveolar abnormalities, dental caries, periodontal disease, hypoplasia.
Usenik, Peter; Bürmen, Miran; Vrtovec, Tomaž; Fidler, Aleš; Pernuš, Franjo; Likar, Boštjan
Despite major improvements in dental healthcare and technology, dental caries remains one of the most prevalent chronic diseases of modern society. The initial stages of dental caries are characterized by demineralization of enamel crystals, commonly known as white spots which are difficult to diagnose. If detected early enough, such demineralization can be arrested and reversed by non-surgical means through well established dental treatments (fluoride therapy, anti-bacterial therapy, low intensity laser irradiation). Near-infrared (NIR) hyper-spectral imaging is a new promising technique for early detection of demineralization based on distinct spectral features of healthy and pathological dental tissues. In this study, we apply NIR hyper-spectral imaging to classify and visualize healthy and pathological dental tissues including enamel, dentin, calculus, dentin caries, enamel caries and demineralized areas. For this purpose, a standardized teeth database was constructed consisting of 12 extracted human teeth with different degrees of natural dental lesions imaged by NIR hyper-spectral system, X-ray and digital color camera. The color and X-ray images of teeth were presented to a clinical expert for localization and classification of the dental tissues, thereby obtaining the gold standard. Principal component analysis was used for multivariate local modeling of healthy and pathological dental tissues. Finally, the dental tissues were classified by employing multiple discriminant analysis. High agreement was observed between the resulting classification and the gold standard with the classification sensitivity and specificity exceeding 85 % and 97 %, respectively. This study demonstrates that NIR hyper-spectral imaging has considerable diagnostic potential for imaging hard dental tissues.
Gao, Xiaoli; Jiang, Shan; Koh, David; Hsu, Chin-Ying Stephen
As a highly prevalent multifactorial disease, dental caries afflicts a large proportion of the world's population. As teeth are constantly bathed in saliva, the constituents and properties of this oral fluid play an essential role in the occurrence and progression of dental caries. Various inorganic (water and electrolytes) and organic (proteins and peptides) components may protect teeth from dental caries. This occurs via several functions, such as clearance of food debris and sugar, aggregation and elimination of microorganisms, buffering actions to neutralize acid, maintaining supersaturation with respect to tooth mineral, participation in formation of the acquired pellicle and antimicrobial defense. Modest evidence is available on the associations between dental caries and several salivary parameters, including flow rate, buffering capacity and abundance of mutans streptococci. Despite some controversial findings, the main body of the literature supports an elevated caries prevalence and/or incidence among people with a pathologically low saliva flow rate, compromised buffering capacity and early colonization or high titer of mutans streptococci in saliva. The evidence remains weak and/or inconsistent on the association between dental caries and other saliva parameters, such as other possible cariogenic species (Lactobacillus spp., Streptococcus sanguis group, Streptococcus salivarius, Actinomyces spp. and Candida albicans), diversity of saliva microbiomes, inorganic and organic constituents (electrolytes, immunoglobulins, other proteins and peptides) and some functional properties (sugar clearance rate, etc.). The complex interactions between salivary components and functions suggest that saliva has to be considered in its entirety to account for its total effects on teeth. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Singhal, Astha; Damiano, Peter; Sabik, Lindsay
Dental coverage for adult enrollees is an optional benefit under Medicaid. Thirty-one states and the District of Columbia have expanded eligibility for Medicaid under the Affordable Care Act. Millions of low-income adults have gained health care coverage and, in states offering dental benefits, oral health coverage as well. Using data for 2010 and 2014 from the Behavioral Risk Factor Surveillance System, we examined the impact of Medicaid adult dental coverage and eligibility expansions on low-income adults' use of dental care. We found that low-income adults in states that provided dental benefits beyond emergency-only coverage were more likely to have had a dental visit in the past year, compared to low-income adults in states without such benefits. Among states that provided dental benefits and expanded their Medicaid program, regression-based estimates suggest that childless adults had a significant increase (1.8 percentage points) in the likelihood of having had a dental visit, while parents had a significant decline (8.1 percentage points). One possible explanation for the disparity is that after expansion, newly enrolled childless adults might have exhausted the limited dental provider capacity that was available to parents before expansion. Additional policy-level efforts may be needed to expand the dental care delivery system's capacity. Project HOPE—The People-to-People Health Foundation, Inc.
Sun, Jian; Zheng, Jia-Wei
The teaching of dental English for undergraduate students plays an important role in dental education. Most dental schools or colleges have set up the course of dental English education in China. However, this course lacks of a unified educational plans, contents and goals based on actual situation of dental students, which does not fully achieve the teaching purpose. This study was aimed to explore the developmental direction of the course of dental English education through comparison among different dental schools or colleges in China, in order to find out the teaching mode of dental English education, and promote the teaching effect and cultivation of international dental talents.
Hendricson, William; Eisenberg, Elise; Guest, Gary; Jones, Pamela; Johnson, Lynn; Panagakos, Fotinos; McDonald, James; Cintron, Laura
In spite of efforts by many dental schools to provide information technology resources for students, only a handful of studies have been conducted to determine what dental students think about these initiatives. There are no reports in the literature describing students' perceptions of mandatory laptop programs, which are now being implemented by at least 25 percent of North American dental schools. In schools that have implemented laptop programs, students are required either to enroll with their own laptops that meet specifications or to purchase a laptop from the school at matriculation. In some schools, students are also required to purchase curriculum support software that is bundled with the laptop. This study was conducted to determine students' opinions at U.S. dental schools with mandatory laptop programs about these aspects of this information technology initiative: frequency of use, perceived necessity of use, note-typing during lectures, effectiveness of training, influence on study habits, benefits, implementation problems, added value in relation to added tuition costs, impact on quality of dental education, overall rating of the laptop experience, and impact of the laptop on use of other electronic curriculum resources. Responses of students at schools that purchased packaged curriculum support software from a commercial vendor were compared with students' responses at schools where faculty provided their own educational software. Responses were also compared among freshmen, sophomores, and upperclassmen in a cross-sectional sample. In 2004, approximately 800 dental students at fourteen dental schools responded to eleven questions that requested their impressions and evaluation of mandatory laptop programs and associated educational software. These questions comprised one section of the IREC Students' Questionnaire (IREC=Institutional Readiness for Electronic Curriculum) that assessed students' perceptions of various aspects of information technology
Solaberrieta, E; Minguez, R; Barrenetxea, L; Sierra, E; Etxaniz, O
The implementation of computer-aided design/computer-aided manufacturing (CAD/CAM) systems with virtual articulators, which take into account the kinematics, constitutes a breakthrough in the construction of customised dental prostheses. This paper presents a multidisciplinary protocol involving CAM techniques to produce dental prostheses. This protocol includes a step-by-step procedure using innovative reverse engineering technologies to transform completely virtual design processes into customised prostheses. A special emphasis is placed on a novel method that permits a virtual location of the models. The complete workflow includes the optical scanning of the patient, the use of reverse engineering software and, if necessary, the use of rapid prototyping to produce CAD temporary prostheses.
Nayar, Sanjna; Mahadevan, R
Digital dental impression is a revolutionary technological advancement that so surpasses the accuracy and efficiency of former techniques for obtaining replicas of prepared teeth for the purpose of fabricating restorations that its adoption by dentists is rapidly eclipsing the use of elastomeric impression materials. The ultimate goals of dentists dedicated to quality restorative dentistry are to make their treatment of patients as accurate, stressless, and efficient as possible. By elimination of the everyday problems described above, there is no question that the significant advantages of digital impressions will make intraoral digital scanning standard procedure in most dental offices within the next several years. Furthermore, digital impressions have proven to reduce remakes and returns, as well as increase overall efficiency. The patient also benefits by being provided a far more positive experience. Finally, through the use of digital impression making, it has been determined that laboratory products become more consistent and require less chair time at insertion.
Full Text Available Digital dental impression is a revolutionary technological advancement that so surpasses the accuracy and efficiency of former techniques for obtaining replicas of prepared teeth for the purpose of fabricating restorations that its adoption by dentists is rapidly eclipsing the use of elastomeric impression materials. The ultimate goals of dentists dedicated to quality restorative dentistry are to make their treatment of patients as accurate, stressless, and efficient as possible. By elimination of the everyday problems described above, there is no question that the significant advantages of digital impressions will make intraoral digital scanning standard procedure in most dental offices within the next several years. Furthermore, digital impressions have proven to reduce remakes and returns, as well as increase overall efficiency. The patient also benefits by being provided a far more positive experience. Finally, through the use of digital impression making, it has been determined that laboratory products become more consistent and require less chair time at insertion.
Chiodo, Gary T.; And Others
A survey of Oregon dentists (n=248) and dental hygienists (n=235) investigated frequency of patient-initiated sexual advances and methods of dealing with them. Up to 44 percent experienced 1 or more patient verbal advances, and 23 percent experienced physical advances during a 5-year period. Inclusion of related issues in professional curricula is…
... dental treatment. 17.163 Section 17.163 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Dental Services § 17.163 Posthospital outpatient dental treatment. The Chief, Dental Service may authorize outpatient dental care which is reasonably necessary to complete treatment of a...
Manny, Edward F.; And Others
This overview of dental radiology contains sections on demographics, equipment, dental radiology quality assurance, efficacy, dental radiology education curricula, professional organizations' guidelines for training and use, and state activities. In section 1 dental personnel, population of dental personnel, employment and earning prospects,…
... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Intraoral dental drill. 872.4130 Section 872.4130...) MEDICAL DEVICES DENTAL DEVICES Surgical Devices § 872.4130 Intraoral dental drill. (a) Identification. An intraoral dental drill is a rotary device intended to be attached to a dental handpiece to drill holes in...
Background: Dental pain is an ache or soreness within or around a tooth. It has a wide range of etiology, the commonest being dental caries. Dental pain is one of the main reasons for seeking dental care. Objectives: To assess the relationship between experiences of toothache, dental visits and caries experience among ...
Chi square. P≤0.05 was considered significant. Results. The proportion of the respondents who had worked with dental auxiliaries, dental therapists, dental surgery assistants, dental technicians and dental aids was 100%,. 59.5%, 43.2%, 45.9% and 5.4% respectively (Fig. 1). More than half (51.4%) of the respondents had ...
Sari, M E; Ozmen, B; Koyuturk, A E; Tokay, U; Kasap, P; Guler, D
The purpose of this study was to analyze traumatic dental injuries in children visiting the dental hospital emergency department in Samsun of Turkey, in the period from 2007 to 2011. Data of age, gender, causes of dental trauma, injured teeth, type of dental injuries, the application period, the dental treatments, and traumatic dental injuries according to the seasons were obtained from the records at dental hospital. Of all 320 patients with traumatic dental injury, 205 were boys and 115 were girls with a boys/girls ratio 1.78:1. Traumatic dental injury was observed more frequently in the 7-12 age groups: 52.5% in girls and 67.8% in boys. Falls are the major cause of traumatic dental injury in the age group 6-12 (51.4%). Sport activities are a common cause of traumatic dental injury in the 7-12 age group (34.2%). Patients visited a dentist within approximately 2 h (57.1%). The upper anterior teeth were subjected to trauma more frequently than the lower anterior teeth. The maxillary central incisors were the most commonly affected teeth, and the mandibular canins were the least affected teeth. In primary teeth, avulsion was the most common type of dental injury (23%); on the other hand, enamel fractures were the most common type of dental injury (30.6%) observed in permanent teeth. In the primary dentition, the most commonly performed treatments were dental examination and prescribing (70%). The most common treatment choices in permanent teeth were restoration and dental examination (49.7 and 15.8%, respectively). The results of the study show that the emergency intervention to traumatized teeth is important for good prognosis of teeth and oral tissues. Therefore, the parents should be informed about dental trauma in schools, and dental hospital physicians should be subjected to postgraduate training.
Aalto-Korte, Kristiina; Alanko, Kristiina; Kuuliala, Outi; Jolanki, Riitta
Methacrylates are important allergens in dentistry. The study aimed to analyse patch test reactivity to 36 acrylic monomers in dental personnel in relation to exposure. We reviewed the test files at the Finnish Institute of Occupational Health from 1994 to 2006 for allergic reactions to acrylic monomers in dental personnel and analysed the clinical records of the sensitized patients. 32 patients had allergic reactions to acrylic monomers: 15 dental nurses, 9 dentists, and 8 dental technicians. The dentists and dental nurses were most commonly exposed to 2-hydroxyethyl methacrylate (2-HEMA), triethyleneglycol dimethacrylate (TREGDMA), and 2,2-bis[4-(2-hydroxy-3-methacryloxypropoxy) phenyl]propane (bis-GMA). 8 dentists and 12 dental nurses were allergic to 2-HEMA. The remaining dentist was positive to bis-GMA and other epoxy acrylates. The remaining 3 dental nurses reacted to diethyleneglycol diacrylate (DEGDA) or triethyleneglycol diacrylate (TREGDA), but not to monofunctional and multifunctional methacrylates. Our dental technicians were mainly exposed and sensitized to methyl methacrylate (MMA) and ethyleneglycol dimethacrylate (EGDMA). 1 technician reacted only to 2-HEMA, and another to ethyl methacrylate (EMA) and ethyl acrylate (EA). 2-HEMA was the most important allergen in dentists and dental nurses, and MMA and EGDMA in dental technicians. Reactions to bis-GMA, DEGDA, TREGDA, EMA and EA were relevant in some patients.
Alexander, D; Clarkson, J; Buchanan, R; Chadwick, G; Chesters, R; Drisko, C L; Douglass, C W; Farrell, L; Fletcher, K; Makoni, F; Monaco, M; Nordquist, B; Park, N I; Riggs, S; Schou, L; Smales, F C; Stamm, J W; Toh, C G; Volpe, T; Ward, P; Warren, P
The ultimate purpose of both dental industry and dental education is to improve the oral health of the public. This report provides background information on the different roles and objectives of the dental industry and dental education communities, the different operating environment of each sector and also areas of common interest where collaboration will be of mutual benefit. The report addresses five areas for potential collaboration between the dental industry and the dental education communities: 1. Contribution to joint activities. 2. Effectiveness and efficiency. 3. Workforce needs. 4. Middle- and low-income countries. 5. The future of International Federation of Dental Educators and Associations (IFDEA). The traditional areas of support and their limitations that have been provided by industry are outlined in the report and some new approaches for collaboration are considered. Industry-based research has been an important factor in developing new products and technologies and in promoting oral health. However there is a need to facilitate the introduction of these developments at an early stage in the education process. Industry has to operate in an efficient manner to remain competitive and maximise its returns and therefore survive. The academic sector operates in a different environment and under different governance structures; although some trends are noted towards adoption of greater efficiency and financial accountability similar to industry. Opportunities to jointly develop best business practices should be explored. Industry has responded well to the oral health needs of the public through the development of new products and technologies. The education community needs to respond in a similar way by examining different healthcare delivery models worldwide and developing programmes to train members of the dental team to cater for future needs and demands of communities in different regions of the world. The reputation of industry-based scientists
Calvasina, Paola; Muntaner, Carles; Quiñonez, Carlos
This study examines predictors of transnational dental care utilization, or the use of dental care across national borders, over a 4-year period among immigrants to Canada. Data from the Longitudinal Survey of Immigrants to Canada (LSIC, 2001-2005) were used. Sampling and bootstrap weights were applied to make the data nationally representative. Bivariate and multiple logistic regression analyses were applied to identify factors associated with immigrants' transnational dental care utilization. Approximately 13% of immigrants received dental care outside Canada over a period of 4 years. Immigrants lacking dental insurance (OR = 2.05; 95% CI: 1.55-2.70), those reporting dental problems (OR = 1.45; 95% CI: 1.12-1.88), who were female (OR = 1.59; 95% CI: 1.22-2.08), aged ≥ 50 years (OR = 2.30; 95% CI: 1.45-3.64), and who were always unemployed (OR = 1.70; 95% CI: 1.20-2.39) were more likely to report transnational dental care utilization. History of social assistance was inversely correlated with the use of dental services outside Canada (OR = 0.48; 95% CI: 0.30-0.83). It is estimated that roughly 11 500 immigrants have used dental care outside Canada over a 4-year period. Although transnational dental care utilization may serve as an individual solution for immigrants' initial barriers to accessing dental care, it demonstrates weaknesses to in-country efforts at providing publicly funded dental care to socially marginalized groups. Policy reforms should be enacted to expand dental care coverage among adult immigrants. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Library and academic websites are among the most reliable Internet resources available today. Schools of all types use the Internet as a means of sharing information; and libraries provide broader access to their collections via the Web. For researchers seeking specific, authoritative resources on dental history, library and dental school websites are most helpful in identifying print and online resources, in describing manuscript collections, and in presenting a history of the host institution. A library site often can provide sufficient information online to eliminate the need for an in-person visit to the library. On the other hand, a library site may tantalize the historian with enough information on unique collections that a trip can be justified.
Marsh, P D
Dental plaque is an example of a microbial biofilm with a diverse microbial composition; it is found naturally on teeth and confers advantages to the host, for example, by preventing colonization by exogenous, and often pathogenic, micro-organisms. In individuals with a high frequency sugar diet, or with a severely compromised saliva flow, the levels of potentially cariogenic bacteria (acid-producing and acid-tolerating species) can increase beyond those compatible with enamel health. This article discusses antimicrobial strategies to control dental caries, including; reducing plaque levels, in general or specific cariogenic bacteria in particular, by antiplaque or antimicrobial agents; reducing bacterial acid production by replacing fermentable carbohydrates in the diet with sugar substitutes, or by interfering with bacterial metabolism with fluoride or antimicrobial agents.
Scutariu, Mihaela Monica; Forna, Norina
Dental services for elderly patients are characterized by a series of particularities related to the vulnerability of this age group, which is affected by various co morbidities, and the diminished physical, cognitive and financial capacities. Finding ways to keep elderly patients coming to a dental office is possible by improving the dentist-patient relationship and implicitly the quality of care by increasing the self-esteem of the elderly and their place in society, by increasing the role of oral health in the quality of life, and here we refer to the pleasure of eating, the pleasant physical aspect and normal diction. The present paper presents the psychological aspects that interfere in the communication process between the dentist and the elderly patient and the changes motivation undergoes when people are in pain. These data can sometimes change the reticent attitude of the dentist towards the elderly patient which is often considered to be a risk patient.
Sanchez, F.; Carrascosa, P.; Urtube, S.; Carrascosa, J.
To determine the location and identification of the lower dental channel (LDC) and to show the measures, guides, and different lesions that might affect it, the authors offer a retrospective and descriptive analysis of 36 CT' exams of the jaw, as a pre-implant evaluation. A Picker PQ 500 helicoidal was used. Under the 'Dental' software program, the cross-sections were reprocessed at a Voxel Q work station. The findings were divided in 3 groups: 1) Optimal visualization of the LDC in 28 patients (78%); 2) Difficult visualization of the LDC in 6 patients (16,5%); 3) The LDC was not identified in 2 patients (5,5%). Furthermore, lesions affecting the LDC were identified in 5 patients (14%) included in group 1. (author)
While there are many benefits for dental practices that incorporate digital systems into their workflow, the dental team must first master the learning curve involved in order to maximize their advantages for creating well-fitting restorations. This article describes the current systems-both digital impression systems and chairside CAD/CAM systems-including software and digital cameras and scanners. The author emphasizes that to consistently capture accurate impressions with this technology, the dental team must continue to rely on traditional skills such as achieving optimal soft-tissue retraction and maintaining moisture control and isolation.
Farges, Jean-Christophe; Alliot-Licht, Brigitte; Renard, Emmanuelle; Ducret, Maxime; Gaudin, Alexis; Smith, Anthony J; Cooper, Paul R
Dental caries is a chronic infectious disease resulting from the penetration of oral bacteria into the enamel and dentin. Microorganisms subsequently trigger inflammatory responses in the dental pulp. These events can lead to pulp healing if the infection is not too severe following the removal of diseased enamel and dentin tissues and clinical restoration of the tooth. However, chronic inflammation often persists in the pulp despite treatment, inducing permanent loss of normal tissue and reducing innate repair capacities. For complete tooth healing the formation of a reactionary/reparative dentin barrier to distance and protect the pulp from infectious agents and restorative materials is required. Clinical and in vitro experimental data clearly indicate that dentin barrier formation only occurs when pulp inflammation and infection are minimised, thus enabling reestablishment of tissue homeostasis and health. Therefore, promoting the resolution of pulp inflammation may provide a valuable therapeutic opportunity to ensure the sustainability of dental treatments. This paper focusses on key cellular and molecular mechanisms involved in pulp responses to bacteria and in the pulpal transition between caries-induced inflammation and dentinogenic-based repair. We report, using selected examples, different strategies potentially used by odontoblasts and specialized immune cells to combat dentin-invading bacteria in vivo.
Full Text Available Dental caries is a chronic infectious disease resulting from the penetration of oral bacteria into the enamel and dentin. Microorganisms subsequently trigger inflammatory responses in the dental pulp. These events can lead to pulp healing if the infection is not too severe following the removal of diseased enamel and dentin tissues and clinical restoration of the tooth. However, chronic inflammation often persists in the pulp despite treatment, inducing permanent loss of normal tissue and reducing innate repair capacities. For complete tooth healing the formation of a reactionary/reparative dentin barrier to distance and protect the pulp from infectious agents and restorative materials is required. Clinical and in vitro experimental data clearly indicate that dentin barrier formation only occurs when pulp inflammation and infection are minimised, thus enabling reestablishment of tissue homeostasis and health. Therefore, promoting the resolution of pulp inflammation may provide a valuable therapeutic opportunity to ensure the sustainability of dental treatments. This paper focusses on key cellular and molecular mechanisms involved in pulp responses to bacteria and in the pulpal transition between caries-induced inflammation and dentinogenic-based repair. We report, using selected examples, different strategies potentially used by odontoblasts and specialized immune cells to combat dentin-invading bacteria in vivo.
Hanaoka, Yoichi; Ueno, Asao; Tsuzuki, Tamiyuki; Kajiwara, Masahiro; Minaguchi, Kiyoshi; Sato, Yoshinobu
A dental chart is very useful as a standard source of evidence in the personal identification of bodies. However, the kind of dental chart available will often vary as a number of types of odontogram have been developed where the visual representation of dental conditions has relied on hand-drawn representation. We propose the Digital Dental Chart (DDC) as a new style of dental chart, especially for open investigations aimed at establishing the identity of unknown bodies. Each DDC is constructed using actual oral digital images and dental data, and is easy to upload onto an Internet website. The DDC is a more useful forensic resource than the standard types of dental chart in current use as it has several advantages, among which are its ability to carry a large volume of information and reproduce dental conditions clearly and in detail on a cost-effective basis.
Humphris, Gerry; Spyt, James; Herbison, Alice G; Kelsey, Thomas W
Dental anxiety of patients is a common feature of the everyday experience of dental practice. This article advocates the use of regular assessment of this psychological construct to assist in patient management. Various tools, such as the Modified Dental Anxiety Scale (MDAS), are available to monitor dental anxiety that are quick to complete and easy to interpret. Patient burden is low. A new mobile phone assessment system (DENTANX) is being developed for distribution. This application and other psychological interventions are being investigated to assist patients to receive dental care routinely. Clinical relevance: This article provides evidence and expert opinion on the worth of regular dental anxiety assessment in dental practice using structured tools, such as the Modified Dental Anxiety Scale, and consideration of psychological intervention development.
Venkatesh, K Vijay; Nandini, V Vidyashree
Dental technology is undergoing advancements at a fast pace and technology is being imported from various other fields. One such imported technology is direct metal laser sintering technology for casting metal crowns. This article will discuss the process of laser sintering for making metal crowns and fixed partial dentures with a understanding of their pros and cons.
Venkatesh, K. Vijay; Nandini, V. Vidyashree
Dental technology is undergoing advancements at a fast pace and technology is being imported from various other fields. One such imported technology is direct metal laser sintering technology for casting metal crowns. This article will discuss the process of laser sintering for making metal crowns and fixed partial dentures with a understanding of their pros and cons.
Full Text Available Stem cells are primitive cells that can differentiate and regenerate organs in different parts of the body such as heart, bones, muscles and nervous system. This has been a field of great clinical interest with immense possibilities of using the stem cells in regeneration of human organ those are damaged due to disease, developmental defects and accident. The knowledge of stem cell technology is increasing quickly in all medical specialties and in dental field too. Stem cells of dental origin appears to hold the key to various cell-based therapies in regenerative medicine, but most avenues are in experimental stages and many procedures are undergoing standardization and validation. Long-term preservation of SHED cells or DPSC is becoming a popular consideration, similar to the banking of umbilical cord blood. Dental pulp stem cells (DPSCs are the adult multipotent cells that reside in the cell rich zone of the dental pulp. The multipotent nature of these DPSCs may be utilized in both dental and medical applications. A systematic review of the literature was performed using various internet based search engines (PubMed, Medline Plus, Cochrane, Medknow, Ebsco, Science Direct, Hinari, WebMD, IndMed, Embase using keywords like "dental pulp stem cells", "regeneration", "medical applications", "tissue engineering". DPSCs appears to be a promising innovation for the re-growth of tissues however, long term clinical studies need to be carried out that could establish some authentic guidelines in this perspective.
Kabir, Ramchandra; Gupta, Manish; Aggarwal, Avanti; Sharma, Deepak; Sarin, Anurag; Kola, Mohammed Zaheer
Stem cells are primitive cells that can differentiate and regenerate organs in different parts of the body such as heart, bones, muscles and nervous system. This has been a field of great clinical interest with immense possibilities of using the stem cells in regeneration of human organ those are damaged due to disease, developmental defects and accident. The knowledge of stem cell technology is increasing quickly in all medical specialties and in dental field too. Stem cells of dental origin appears to hold the key to various cell-based therapies in regenerative medicine, but most avenues are in experimental stages and many procedures are undergoing standardization and validation. Long-term preservation of SHED cells or DPSC is becoming a popular consideration, similar to the banking of umbilical cord blood. Dental pulp stem cells (DPSCs) are the adult multipotent cells that reside in the cell rich zone of the dental pulp. The multipotent nature of these DPSCs may be utilized in both dental and medical applications. A systematic review of the literature was performed using various internet based search engines (PubMed, Medline Plus, Cochrane, Medknow, Ebsco, Science Direct, Hinari, WebMD, IndMed, Embase) using keywords like "dental pulp stem cells", "regeneration", "medical applications", "tissue engineering". DPSCs appears to be a promising innovation for the re-growth of tissues however, long term clinical studies need to be carried out that could establish some authentic guidelines in this perspective.
Dental radiology uses X-ray technology to diagnose and design treatment of various clinical problems related to the oral cavity and surrounding tissues. As technology quickly evolves, there are numerous X-ray modalities using different tools in the attempt to best image and treat efficiently these diseases, disorders or other related clinical conditions. The reported numbers of dental X-rays, the fact that these may be under-reported in many countries and because dental X-rays are performed more on younger individuals, whose teeth and dentition are still developing, calls for increased need on radiation protection. The objectives of this paper are to report on the latest technology updates and related radiation protection issues, to present future directions and define gaps. Most of existing radiation protection national and international guidelines are more than a decade old. Update is needed to account for newer technologies such as cone beam computed tomography (CBCT) and digital imaging. Diagnostic Reference Levels (DRLs), a well established method for dose optimization, are not yet defined for CBCT and have to be set for various clinical indications. As far as shielding is concerned, recent data confirm that use of lead apron, even in pregnant patients, or gonadal shielding are not recommended, due to negligible radiation dose reduction. Thyroid lead shielding should be used in case the organ is in or close to the primary beam. Specifically for CBCT, leaded glasses, thyroid collars and collimation (smaller field of view (FOV) especially for paediatric patients) minimize the dose to organs outside the FOV. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.
Zhou, Z R; Zheng, J
The application of tribology in dentistry is a growing and rapidly expanding field. Intensive research has been conducted to develop an understanding of dental tribology for successful design and selection of artificial dental materials. In this paper, the anatomy and function of human teeth is presented in brief, three types of current artificial dental materials are summarized, and their advantages and disadvantages, as well as typical clinical applications, are compared based on the literature. Possible tribological damage of tooth structure, which is induced by complex interfacial motion, and friction-wear test methods are reported. According to results obtained by the authors and from the literature, the main progress in the area of dental tribology on both natural teeth and artificial dental materials is reviewed. Problems and challenges are discussed and future research directions for dental tribology are recommended. (topical review)
Hoshi, Masaharu; Kato, Kazuo; Wada, Takuro; Antoku, Shigetoshi; Russell, W.J.
Salivary gland doses incurred during dental radiography were measured by phantom dosimetry, and these dose data and data obtained during a two-week survey of Hiroshima and Nagasaki dental hospitals and clinics were used to estimate the respective doses to members of the populations of the two cities. The results obtained were used to supplement previously determined doses to the thyroid gland, lens, and pituitary gland from dental radiography. No significant differences in doses were observed by age, sex or city. Doses to the salivary glands during dental radiography are probably not sufficiently large to cause bias in assessments of atomic bomb survivors for late radiation effects. However, the steadily increasing use of dental radiography underscores the need for continued monitoring of dental radiography doses in the interests of these assessments. (author)
Zhou, Z R; Zheng, J [Tribology Research Institute, Key Laboratory for Advanced Technology of Materials of Ministry of Education, Southwest Jiaotong University, Chengdu 610031 (China)], E-mail: firstname.lastname@example.org
The application of tribology in dentistry is a growing and rapidly expanding field. Intensive research has been conducted to develop an understanding of dental tribology for successful design and selection of artificial dental materials. In this paper, the anatomy and function of human teeth is presented in brief, three types of current artificial dental materials are summarized, and their advantages and disadvantages, as well as typical clinical applications, are compared based on the literature. Possible tribological damage of tooth structure, which is induced by complex interfacial motion, and friction-wear test methods are reported. According to results obtained by the authors and from the literature, the main progress in the area of dental tribology on both natural teeth and artificial dental materials is reviewed. Problems and challenges are discussed and future research directions for dental tribology are recommended. (topical review)
Asawa, Kailash; Gupta, Vivek V.; Tak, Mridula; Nagarajappa, Ramesh; Chaturvedi, Pulkit; Bapat, Salil; Mishra, Prashant; Roy, Santanu Sen
Objective. The purpose of the study was to assess the knowledge, value, opinion, and practice regarding use of dental sealants among private dental practitioners in Bathinda City, Punjab, India. Materials and Methods. A cross-sectional survey was conducted among all private dental practitioners in Bathinda City, Punjab. A self-administered structured questionnaire consisting of 28 items was used to assess their knowledge, value, opinion, and practice regarding dental sealants. One-way analysi...
Manipal, Sunayana; Mohan, C. S. Anand; Kumar, D. Lokesh; Cholan, Priyanka K.; Ahmed, Adil; Adusumilli, Preethi
Objective: The aim of this study is to assess the dental esthetics awareness among dental students in a private university in Chennai as none is available in Chennai, Tamil Nadu. Materials and Methods: The dental esthetics awareness questionnaire consisting of a battery of 19 questions under five aspects that is, physical, functional, social, knowledge, and psychological aspects was administered to a sample of 100 dental college students aged between 18 and 27 years in a private college in Ch...
Nakata, Ayumi; Sato, Yoko
Objectives. To provide an overview of the literature investigating dental fear in children during the past ten years and to review factors of child dental fear. Methods. The literature was systematically retrieved from an electronic database. The thirty four literatures which were written about the fear of dentistry, psychology and behavior during dental treatment were chosen. Results. The terms of fear being used were “Shika-kyoufu”, “Dental fear”, etc. However, the terms were not defined in...
Jones, Vickie E; Karydis, Anastasios; Hottel, Timothy L
Interprofessional and intraprofessional education (when students from two or more professions or within the same profession, respectively, learn about, from, and/or with each other) is crucial for effective interdisciplinary collaboration. The aims of this study were to assess the effectiveness of a clinical intraprofessional education program for dental and dental hygiene students, based on students' expectations and satisfaction with the program and patients' satisfaction with the team-based care. The pilot program was developed at the University of Tennessee Health Science Center College of Dentistry, where dental hygiene students were paired randomly with dental students scheduled for prophylaxis, scaling and root planing, or periodontal maintenance. Surveys with questions about the students' expectations and satisfaction were distributed to 89 senior dental students and 27 senior dental hygiene students before and after team-based procedures. Another survey was distributed to 17 patients asking about their satisfaction with the team-based care. All 27 dental hygiene students (100% response rate), 51 dental students (57.3% response rate), and all 17 patients (100% response rate) participated in the surveys. The results showed that both the dental and dental hygiene students had high expectations and were overall satisfied with the intraprofessional education. The students' expectations and perceived educational gap (difference between expectations and satisfaction) differed for the dental and dental hygiene students (ppatients were overwhelmingly satisfied with the team-based care. These results suggest that this intraprofessional practice model provided an effective educational experience for both dental and dental hygiene students and patients. The differences between the dental hygiene and dental students' expectations will help in the design of more effective training that promotes intraprofessional and interprofessional teamwork.
Yavuz, I.; Rizal, M. F.; Kiswanjaya, B.
The innovations and advantages of three-dimensional cone beam computed dental tomography (3D CBCT) are continually growing for its potential use in dental research. Imaging techniques are important for planning research in dentistry. Newly improved 3D CBCT imaging systems and accessory computer programs have recently been proven effective for use in dental research. The aim of this study is to introduce 3D CBCT and open a window for future research possibilities that should be given attention in dental research.
Gonchukov, S; Sukhinina, A; Vdovin, Yu; Biryukova, T
This work is devoted to the optimization of fluorescence dental calculus diagnostics in optical spectrum. The optimal wavelengths for fluorescence excitation and registration are determined. Two spectral ranges 620 – 645 nm and 340 – 370 nm are the most convenient for supra- and subgingival calculus determination. The simple implementation of differential method free from the necessity of spectrometer using was investigated. Calculus detection reliability in the case of simple implementation is higher than in the case of spectra analysis at optimal wavelengths. The use of modulated excitation light and narrowband detection of informative signal allows us to decrease essentially its diagnostic intensity even in comparison with intensity of the low level laser dental therapy
Intra-oral dental X-ray apparatus for panoramic dental radiography is described in detail. It comprises an electron gun having an elongated tubular target carrier extending into the patient's mouth. The carrier supports an inclined target for direction of an X-ray pattern towards a film positioned externally of the patient's mouth. Image definition is improved by a focusing anode which focuses the electron beam into a sharp spot (0.05 to 0.10 mm diameter) on the target. The potential on the focusing anode is adjustable to vary the size of the spot. An X-ray transmitting ceramic (oxides of Be, Al and Si) window is positioned adjacent to the front face of the target. The electron beam can be magnetically deflected to change the X-ray beam direction. (author)
Full Text Available The term "work-related musculoskeletal disorders (WMSDs," refers to musculoskeletal disorders to which the work environment contributes significantly, or to musculoskeletal disorders that are made worse or longer lasting by work conditions or workplace risk factors. In recent years, there has been an increase in reporting WMSDs for dental persons. Risk factors of WMSDs with specific reference to dentistry include - stress, poor flexibility, improper positioning, infrequent breaks, repetitive movements, weak postural muscles, prolonged awkward postures and improper adjustment of equipment. Ergonomics is the science of designing jobs, equipment and workplaces to fit workers. Proper ergonomic design is necessary to prevent repetitive strain injuries, which can develop over time and can lead to long-term disability. In this article, 20 strategies to prevent WMSDs in the dental operatory are discussed.