WorldWideScience

Sample records for technology definition study

  1. VSCE technology definition study

    Science.gov (United States)

    Howlett, R. A.; Hunt, R. B.

    1979-01-01

    Refined design definition of the variable stream control engine (VSCE) concept for advanced supersonic transports is presented. Operating and performance features of the VSCE are discussed, including the engine components, thrust specific fuel consumption, weight, noise, and emission system. A preliminary engine design is presented.

  2. Variable Cycle Engine Technology Program Planning and Definition Study

    Science.gov (United States)

    Westmoreland, J. S.; Stern, A. M.

    1978-01-01

    The variable stream control engine, VSCE-502B, was selected as the base engine, with the inverted flow engine concept selected as a backup. Critical component technologies were identified, and technology programs were formulated. Several engine configurations were defined on a preliminary basis to serve as demonstration vehicles for the various technologies. The different configurations present compromises in cost, technical risk, and technology return. Plans for possible variably cycle engine technology programs were formulated by synthesizing the technology requirements with the different demonstrator configurations.

  3. Satellite Power Systems (SPS) concept definition study. Volume 6: SPS technology requirements and verification

    Science.gov (United States)

    Hanley, G.

    1978-01-01

    Volume 6 of the SPS Concept Definition Study is presented and also incorporates results of NASA/MSFC in-house effort. This volume includes a supporting research and technology summary. Other volumes of the final report that provide additional detail are as follows: (1) Executive Summary; (2) SPS System Requirements; (3) SPS Concept Evolution; (4) SPS Point Design Definition; (5) Transportation and Operations Analysis; and Volume 7, SPS Program Plan and Economic Analysis.

  4. Integrated technology rotor/flight research rotor concept definition study

    Science.gov (United States)

    Carlson, R. G.; Beno, E. A.; Ulisnik, H. D.

    1983-01-01

    As part of the Integrated Technology Rotor/Flight Research Rotor (ITR/FRR) Program a number of advanced rotor system designs were conceived and investigated. From these, several were chosen that best meet the started ITR goals with emphasis on stability, reduced weight and hub drag, simplicity, low head moment stiffness, and adequate strength and fatigue life. It was concluded that obtaining low hub moment stiffness was difficult when only the blade flexibility of bearingless rotor blades is considered, unacceptably low fatigue life being the primary problem. Achieving a moderate hub moment stiffness somewhat higher than state of the art articulated rotors in production today is possible within the fatigue life constraint. Alternatively, low stiffness is possible when additional rotor elements, besides the blades themselves, provide part of the rotor flexibility. Two primary designs evolved as best meeting the general ITR requirements that presently exist. An I shaped flexbeam with an external torque tube can satisfy the general goals but would have either higher stiffness or reduced fatigue life. The elastic gimbal rotor can achieve a better combination of low stiffness and high fatigue life but would be a somewhat heavier design and possibly exhibit a higher risk of aeromechanical instability.

  5. Lift/cruise fan V/STOL technology aircraft design definition study. Volume 1: Technology flight vehicle definition

    Science.gov (United States)

    Obrien, W. J.

    1976-01-01

    Concept design is presented for two types of lift/cruise fan technology V/STOL aircraft, turbotip fans and the other using mechanically driven fans. The turbotip research technology aircraft reflects maximum usage of existing airframe components. The propulsion system consists of three turbotip fans pneumatically interconnected to three gas generators. Thrust modulation is accomplished by use of energy transfer and control system and thrust reduction modulation. This system can also be operated in the two engine/three fan mode. The mechanical RTA is virtually identical to the turbotip RTA with the exceptions that a different propulsion system and aft fuselage/tail are used. Both aircraft meet or exceed all of the mission performance guidelines and reflect a low cost, low risk approach.

  6. Nuclear technology terms and definitions

    International Nuclear Information System (INIS)

    1979-02-01

    The terms and definitions in this standard are part of the catalogue of definitions 'Nuclear technology, terms and definitions', in eight parts; they are the latest version of the standards and draft standards of DIN 25 401, part 10 to 19, published at irregular intervals until now. (orig.) [de

  7. Large Deployable Reflector (LDR) system concept and technology definition study. Volume 2: Technology assessment and technology development plan

    Science.gov (United States)

    Agnew, Donald L.; Jones, Peter A.

    1989-01-01

    A study was conducted to define reasonable and representative LDR system concepts for the purpose of defining a technology development program aimed at providing the requisite technological capability necessary to start LDR development by the end of 1991. This volume presents thirteen technology assessments and technology development plans, as well as an overview and summary of the LDR concepts. Twenty-two proposed augmentation projects are described (selected from more than 30 candidates). The five LDR technology areas most in need of supplementary support are: cryogenic cooling; astronaut assembly of the optically precise LDR in space; active segmented primary mirror; dynamic structural control; and primary mirror contamination control. Three broad, time-phased, five-year programs were synthesized from the 22 projects, scheduled, and funding requirements estimated.

  8. NASA Technology Readiness Level Definitions

    Science.gov (United States)

    Mcnamara, Karen M.

    2012-01-01

    This presentation will cover the basic Technology Readiness Level (TRL) definitions used by the National Aeronautics and Space Administration (NASA) and their specific wording. We will discuss how they are used in the NASA Project Life Cycle and their effectiveness in practice. We'll also discuss the recent efforts by the International Standards Organization (ISO) to develop a broadly acceptable set of TRL definitions for the international space community and some of the issues brought to light. This information will provide input for further discussion of the use of the TRL scale in manufacturing.

  9. Satellite Power Systems (SPS) concept definition study (Exhibit D). Volume 5: Systems engineering/integration research and technology

    Science.gov (United States)

    Hanley, G. M.

    1981-01-01

    Guidelines and ground rules followed in the development of requirements for the SPS are presented. Development planning objectives are specified in each of these areas, and evolutionary SPS program scenarios are described for the various concepts studied during the past one year contract. Program descriptions are presented as planning packages of technical tasks, and schedule phasing. Each package identifies the ground based technology effort that will facilitate SPS definitions, designs, development, and operations.

  10. Aero-Propulsion Technology (APT) Task V Low Noise ADP Engine Definition Study

    Science.gov (United States)

    Holcombe, V.

    2003-01-01

    A study was conducted to identify and evaluate noise reduction technologies for advanced ducted prop propulsion systems that would allow increased capacity operation and result in an economically competitive commercial transport. The study investigated the aero/acoustic/structural advancements in fan and nacelle technology required to match or exceed the fuel burned and economic benefits of a constrained diameter large Advanced Ducted Propeller (ADP) compared to an unconstrained ADP propulsion system with a noise goal of 5 to 10 EPNDB reduction relative to FAR 36 Stage 3 at each of the three measuring stations namely, takeoff (cutback), approach and sideline. A second generation ADP was selected to operate within the maximum nacelle diameter constrain of 160 deg to allow installation under the wing. The impact of fan and nacelle technologies of the second generation ADP on fuel burn and direct operating costs for a typical 3000 nm mission was evaluated through use of a large, twin engine commercial airplane simulation model. The major emphasis of this study focused on fan blade aero/acoustic and structural technology evaluations and advanced nacelle designs. Results of this study have identified the testing required to verify the interactive performance of these components, along with noise characteristics, by wind tunnel testing utilizing and advanced interaction rig.

  11. Integrated Technology Rotor/Flight Research Rotor (ITR/FRR) concept definition study

    Science.gov (United States)

    Hughes, C. W.

    1983-01-01

    Studies were conducted by Hughes Helicopters, Inc. (HHI) for the Applied Technology Laboratory and Aeromechanics Laboratory, U.S. Army Research and Technology Laboratories (AVRADCOM) and the Ames Research Center, National Aeronautics and Space Administration (NASA). Results of predesign studies of advanced main rotor hubs, including bearingless designs, are presented in this report. In addition, the Government's rotor design goals and specifications were reviewed and evaluated. Hub concepts were designed and qualitatively evaluated in order to select the two most promising concepts for further development. Various flexure designs, control systems, and pitchcase designs were investigated during the initial phases of this study. The two designs selected for additional development were designated the V-strap and flat-strap cruciform hubs. These hubs were designed for a four bladed rotor and were sized for 18,400 pounds gross weight with the same diameter (62 feet) and solidity (23 inch chord) as the existing rotor on the Rotor Systems Research Aircraft (RSRA).

  12. Design definition study of a lift/cruise fan technology V/STOL airplane: Summary

    Science.gov (United States)

    Zabinsky, J. M.; Higgins, H. C.

    1975-01-01

    A two-engine three-fan V/STOL airplane was designed to fulfill naval operational requirements. A multimission airplane was developed from study of specific point designs. Based on the multimission concept, airplanes were designed to demonstrate and develop the technology and operational procedures for this class of aircraft. Use of interconnected variable pitch fans led to a good balance between high thrust with responsive control and efficient thrust at cruise speeds. The airplanes and their characteristics are presented.

  13. Design definition study of a lift/cruise fan technology V/STOL aircraft. Volume 2: Technology aircraft

    Science.gov (United States)

    1975-01-01

    Technology flight vehicles were defined for three different approaches which demonstrate the concept and characteristics of the multipurpose aircraft established for Navy missions. The propulsion system used for the various technology flight vehicles was representative of that established for the multipurpose aircraft. Existing J97-GE100 gas generators were selected based on cost, availability and exhaust characteristics. The LF459 fans were also selected and are compatible with both technology and operational vehicles. To comply with the design guideline safety criteria, it was determined that three gas generators were required to provide engine out safety in the hover flight mode. The final propulsion system established for the technology aircraft was three existing J97 gas generators powering three LF459 fans. Different aircraft candidates were evaluated for application to the three designated design approaches. Each configuration was evaluated on the basis of (1) propulsion system integration, (2) modification required, (3) pilot's visibility, (4) payload volume, and (5) adaptability to compatible location of center-of-gravity/aerodynamic center and thrust center.

  14. Technology Entrepreneurship: Overview, Definition, and Distinctive Aspects

    OpenAIRE

    Tony Bailetti

    2012-01-01

    Technology entrepreneurship lies at the heart of many important debates, including those around launching and growing firms, regional economic development, selecting the appropriate stakeholders to take ideas to markets, and educating managers, engineers, and scientists. Unless a generally accepted definition of technology entrepreneurship is established, however, these debates lose their focus. The purpose of this article is to identify the themes that dominate the technology entrepreneurshi...

  15. Follow-On Studies for Design Definition of a Lift/Cruise Fan Technology V/STOL Airplane, Volume 1

    Science.gov (United States)

    1977-01-01

    A three engine, three fan V/STOL airplane was designed for use as a Research Technology Airplane in proof-of-concept of a candidate configuration for use as a Navy multimission airplane. Use of mechanically interconnected variable pitch fans is made to accommodate power transfer for flight control in hover and to provide flight capability in the event of a single engine failure. The airplane is a modification of a T-39A transport. Design definition is provided for high risk propulsion components and a development test program is defined.

  16. Technology Entrepreneurship: Overview, Definition, and Distinctive Aspects

    Directory of Open Access Journals (Sweden)

    Tony Bailetti

    2012-02-01

    Full Text Available Technology entrepreneurship lies at the heart of many important debates, including those around launching and growing firms, regional economic development, selecting the appropriate stakeholders to take ideas to markets, and educating managers, engineers, and scientists. Unless a generally accepted definition of technology entrepreneurship is established, however, these debates lose their focus. The purpose of this article is to identify the themes that dominate the technology entrepreneurship literature, provide a definition of technology entrepreneurship, and identify its distinguishing aspects relative to economics, entrepreneurship, and management. The author argues that technology entrepreneurship is an investment in a project that assembles and deploys specialized individuals and heterogeneous assets to create and capture value for the firm. What distinguishes technology entrepreneurship from other entrepreneurship types (e.g., social entrepreneurship, small business management, and self-employment is the collaborative experimentation and production of new products, assets, and their attributes, which are intricately related to advances in scientific and technological knowledge and the firm’s asset ownership rights.

  17. AMPS Supporting Research and Technology (SR and T) report. Atmospheric, Magnetospheric and Plasmas in Space (AMPS) definition study

    Science.gov (United States)

    1976-01-01

    A listing of candidate technology areas that require additional study is presented. These candidate tasks, identified during the AMPS Phase B studies, are requisites to the design, development, and operation of the AMPS concept selected for preliminary design.

  18. Large Deployable Reflector (LDR) system concept and technology definition study. Volume 1: Executive summary, analyses and trades, and system concepts

    Science.gov (United States)

    Agnew, Donald L.; Jones, Peter A.

    1989-01-01

    A study was conducted to define reasonable and representative large deployable reflector (LDR) system concepts for the purpose of defining a technology development program aimed at providing the requisite technological capability necessary to start LDR development by the end of 1991. This volume includes the executive summary for the total study, a report of thirteen system analysis and trades tasks (optical configuration, aperture size, reflector material, segmented mirror, optical subsystem, thermal, pointing and control, transportation to orbit, structures, contamination control, orbital parameters, orbital environment, and spacecraft functions), and descriptions of three selected LDR system concepts. Supporting information is contained in appendices.

  19. Large Deployable Reflector (LDR) system concept and technology definition study. Analysis of space station requirements for LDR

    Science.gov (United States)

    Agnew, Donald L.; Vinkey, Victor F.; Runge, Fritz C.

    1989-01-01

    A study was conducted to determine how the Large Deployable Reflector (LDR) might benefit from the use of the space station for assembly, checkout, deployment, servicing, refurbishment, and technology development. Requirements that must be met by the space station to supply benefits for a selected scenario are summarized. Quantitative and qualitative data are supplied. Space station requirements for LDR which may be utilized by other missions are identified. A technology development mission for LDR is outlined and requirements summarized. A preliminary experiment plan is included. Space Station Data Base SAA 0020 and TDM 2411 are updated.

  20. Large Deployable Reflector (LDR) system concept and technology definition study. Analysis of space station requirements for LDR

    Science.gov (United States)

    Agnew, Donald L.; Vinkey, Victor F.; Runge, Fritz C.

    1989-04-01

    A study was conducted to determine how the Large Deployable Reflector (LDR) might benefit from the use of the space station for assembly, checkout, deployment, servicing, refurbishment, and technology development. Requirements that must be met by the space station to supply benefits for a selected scenario are summarized. Quantitative and qualitative data are supplied. Space station requirements for LDR which may be utilized by other missions are identified. A technology development mission for LDR is outlined and requirements summarized. A preliminary experiment plan is included. Space Station Data Base SAA 0020 and TDM 2411 are updated.

  1. Advanced Propfan Engine Technology (APET) definition study, single and counter-rotation gearbox/pitch change mechanism design

    Science.gov (United States)

    Anderson, R. D.

    1985-01-01

    Single-rotation propfan-powered regional transport aircraft were studied to identify key technology development issues and programs. The need for improved thrust specific fuel consumption to reduce fuel burned and aircraft direct operating cost is the dominant factor. Typical cycle trends for minimizing fuel consumption are reviewed, and two 10,000 shp class engine configurations for propfan propulsion systems for the 1990's are presented. Recommended engine configurations are both three-spool design with dual spool compressors and free power turbines. The benefits of these new propulsion system concepts were evaluated using an advanced airframe, and results are compared for single-rotation propfan and turbofan advanced technology propulsion systems. The single-rotation gearbox is compared to a similar design with current technology to establish the benefits of the advanced gearbox technology. The conceptual design of the advanced pitch change mechanism identified a high pressure hydraulic system that is superior to the other contenders and completely external to the gearboxes.

  2. Hotspots Definition Study

    International Nuclear Information System (INIS)

    De Pater, F.; Brinkman, S.; Schellekens, E.

    2010-03-01

    In the Dutch research programme Climate changes Spatial Planning (CcSP) many scientific projects are carried out. They often take a multidisciplinary approach to the climate issue. However, more attention needed to be given to embedding the programme into practice. Therefore, the board decided to start a hotspot programme. A hotspot was defined as a pilot project in a sector, place or region in which spatial planning and climate change play an important role in the physical shape and land use of the area and where conflicts of interest are found between these and other factors. The hotspot programme started with a definition study. This report is the result of this study. The goal of the study was to identify, describe and evaluate possible hotspots. In two workshops with policy-makers from national and regional governments, consultancy firms and nature conservation organizations, a large number of potential hotspots were identified. Fifteen were selected after the workshops took place and described in detail. The selection was done using a set of conditional criteria, criteria that all had to be met. Two potential hotspots were withdrawn after the selection. Since the Board of the CcSP programme expressed its interest in financing six to seven hotspots, a prioritization was made, using prioritizing criteria. Also the potential hotspots were assessed looking at regional distribution, thematic coverage and target groups. After this assessment and an analysis of the hotspots taking some other factors into account (eg. some hotspots were very similar or one could easily be incorporated in another one) five hotspots were selected: Kampen, Biesbosch-Haringvliet, Zuidplaspolder, Delta Waters and Tilburg. Options to fill the last two places were: Grounds for Change, Noordoostpolder, Oude Vaart Valley and Arnhem/Nijmegen (KAN). For these remaining potential hotspots draft terms of reference were drawn as basis for a project proposals. These terms of reference are added to

  3. A Systems Definition of Educational Technology in Society

    Science.gov (United States)

    Luppicini, Rocci

    2005-01-01

    Conceptual development in the field of Educational Technology provides crucial theoretical grounding for ongoing research and practice. This essay draws from theoretical developments both within and external to the field of Educational Technology to articulate a systems definition of Educational Technology in Society. A systems definition of…

  4. Concept definition for space station technology development experiments. Experiment definition, task 2

    Science.gov (United States)

    1986-01-01

    The second task of a study with the overall objective of providing a conceptual definition of the Technology Development Mission Experiments proposed by LaRC on space station is discussed. During this task, the information (goals, objectives, and experiment functional description) assembled on a previous task was translated into the actual experiment definition. Although still of a preliminary nature, aspects such as: environment, sensors, data acquisition, communications, handling, control telemetry requirements, crew activities, etc., were addressed. Sketches, diagrams, block diagrams, and timeline analyses of crew activities are included where appropriate.

  5. Concept definition and aerodynamic technology studies for single-engine V/STOL fighter/attack aircraft

    Science.gov (United States)

    Nelms, W. P.; Durston, D. A.

    1981-01-01

    The results obtained in the early stages of a research program to develop aerodynamic technology for single-engine V/STOL fighter/attack aircraft projected for the post-1990 period are summarized. This program includes industry studies jointly sponsored by NASA and the Navy. Four contractors have identified promising concepts featuring a variety of approaches for providing propulsive lift. Vertical takeoff gross weights range from about 10,000 to 13,600 kg (22,000 to 30,000 lb). The aircraft have supersonic capability, are highly maneuverable, and have significant short takeoff overload capability. The contractors have estimated the aerodynamics and identified aerodynamic uncertainties associated with their concepts. Wind-tunnel research programs will be formulated to investigate these uncertainties. A description of the concepts is emphasized.

  6. On-orbit technology experiment facility definition

    Science.gov (United States)

    Russell, Richard A.; Buchan, Robert W.; Gates, Richard M.

    1988-01-01

    A study was conducted to identify on-orbit integrated facility needs to support in-space technology experiments on the Space Station and associated free flyers. In particular, the first task was to examine the proposed technology development missions (TDMX's) from the model mission set and other proposed experimental facilities, both individually and by theme, to determine how and if the experiments might be combined, what equipment might be shared, what equipment might be used as generic equipment for continued experimentation, and what experiments will conflict with the conduct of other experiments or Space Station operations. Then using these results, to determine on-orbit facility needs to optimize the implementation of technology payloads. Finally, to develop one or more scenarios, design concepts, and outfitting requirements for implementation of onboard technology experiments.

  7. Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Current and advanced act control system definition study

    Science.gov (United States)

    1982-01-01

    The Current and Advanced Technology ACT control system definition tasks of the Integrated Application of Active Controls (IAAC) Technology project within the Energy Efficient Transport Program are summarized. The systems mechanize six active control functions: (1) pitch augmented stability; (2) angle of attack limiting; (3) lateral/directional augmented stability; (4) gust load alleviation; (5) maneuver load control; and (6) flutter mode control. The redundant digital control systems meet all function requirements with required reliability and declining weight and cost as advanced technology is introduced.

  8. Design definition study of a lift/cruise fan technology V/STOL aircraft. Volume 1: Navy operational aircraft

    Science.gov (United States)

    1975-01-01

    Aircraft were designed and sized to meet Navy mission requirements. Five missions were established for evaluation: anti-submarine warfare (ASW), surface attack (SA), combat search and rescue (CSAR), surveillance (SURV), and vertical on-board delivery (VOD). All missions were performed with a short takeoff and a vertical landing. The aircraft were defined using existing J97-GE gas generators or reasonable growth derivatives in conjunction with turbotip fans reflecting LF460 type technology. The multipurpose aircraft configuration established for U.S. Navy missions utilizes the turbotip driven lift/cruise fan concept for V/STOL aircraft.

  9. Lift/cruise fan V/STOL technology aircraft design definition study. Volume 2: Propulsion transmission system design

    Science.gov (United States)

    Obrien, W. J.

    1976-01-01

    Two types of lift/cruise fan technology aircraft were conceptually designed. One aircraft used turbotip fans pneumatically interconnected to three gas generators, and the other aircraft used variable pitch fans mechanically interconnected to three turboshaft engines. The components of each propulsion transmission system were analyzed and designed to the depth necessary to determine areas of risk, development methods, performance, weights and costs. The types of materials and manufacturing processes were identified to show that the designs followed a low cost approach. The lift/cruise fan thrust vectoring hoods, which are applicable to either aircraft configuration, were also evaluated to assure a low cost/low risk approach.

  10. Dictionary of terms and definitions used in radiation protection technology

    International Nuclear Information System (INIS)

    1975-01-01

    The dictionary contains terms and definitions used in radiation protection technology. This document is developed by the Section of CMEA Secretariat on peaceful atomic energy application on the basis of materials provided by member states. The dictionary contains versions of terms and definitions in the languages of member states. Total number of terms is 94. (I.T.)

  11. Space station high gain antenna concept definition and technology development

    Science.gov (United States)

    Wade, W. D.

    1972-01-01

    The layout of a technology base is reported from which a mechanically gimballed, directional antenna can be developed to support a manned space station proposed for the late 1970's. The effort includes the concept definition for the antenna assembly, an evaluation of available technology, the design of critical subassemblies and the design of critical subassembly tests.

  12. Towards a Re-Definition of Technology Management

    OpenAIRE

    Chanaron , Jean-Jacques; Grange , Thierry

    2006-01-01

    The paper is proposing an historical approach of the definition and constitution of technology management as a discipline leading to a re-visited approach more in line with contemporary issues and problems facing businesses. It is suggested to expand its scope to the strategic management of technology and innovation.

  13. High technology revisited: definition and position

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2006-01-01

    This paper proposes a new approach to defining high technology by distinguishing two different aspects. First, complexity, which is a more or less a `static' view on high technology and is applied to both the final product as well as the production process. Second, the newness, relates to a

  14. Definition of Technology Readiness Levels for Transmutation Fuel Development

    International Nuclear Information System (INIS)

    Jon Carmack; Kemal O. Pasamehmetoglu

    2008-01-01

    To quantitatively assess the maturity of a given technology, the Technology Readiness Level (TRL) process is used. The TRL process has been developed and successfully used by the Department of Defense (DOD) for development and deployment of new technology and systems for defense applications. In addition, NASA has also successfully used the TRL process to develop and deploy new systems for space applications. Transmutation fuel development is a critical technology needed for closing the nuclear fuel cycle. Because the deployment of a new nuclear fuel forms requires a lengthy and expensive research, development, and demonstration program, applying the TRL concept to the transmutation fuel development program is very useful as a management and tracking tool. This report provides definition of the technology readiness level assessment process as defined for use in assessing nuclear fuel technology development for the Transuranic Fuel Development Campaign

  15. Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Current and advanced act control system definition study. Volume 2: Appendices

    Science.gov (United States)

    Hanks, G. W.; Shomber, H. A.; Dethman, H. A.; Gratzer, L. B.; Maeshiro, A.; Gangsaas, D.; Blight, J. D.; Buchan, S. M.; Crumb, C. B.; Dorwart, R. J.

    1981-01-01

    The current status of the Active Controls Technology (ACT) for the advanced subsonic transport project is investigated through analysis of the systems technical data. Control systems technologies under examination include computerized reliability analysis, pitch axis fly by wire actuator, flaperon actuation system design trade study, control law synthesis and analysis, flutter mode control and gust load alleviation analysis, and implementation of alternative ACT systems. Extensive analysis of the computer techniques involved in each system is included.

  16. Definition of technology development missions for early Space Station satellite servicing. Volume 2: Technical

    Science.gov (United States)

    Cable, D. A.; Diewald, C. A.; Hills, T. C.; Parmentier, T. J.; Spencer, R. A.; Stone, G. E.

    1984-01-01

    Volume 2 contains the Technical Report of the approach and results of the Phase 2 study. The phase 2 servicing study was initiated in June 1983, and is being reported in this document. The scope of the contract was to: (1) define in detail five selected technology development missions (TDM); (2) conduct a design requirement analysis to refine definitions of satellite servicing requirements at the space station; and (3) develop a technology plan that would identify and schedule prerequisite precursor technology development, associated. STS flight experiments and space station experiments needed to provide onorbit validation of the evolving technology.

  17. Hybrid propulsion technology program. Volume 2: Technology definition package

    Science.gov (United States)

    Jensen, Gordon E.; Holzman, Allen L.; Leisch, Steven O.; Keilbach, Joseph; Parsley, Randy; Humphrey, John

    1989-01-01

    A concept design study was performed to configure two sizes of hybrid boosters; one which duplicates the advanced shuttle rocket motor vacuum thrust time curve and a smaller, quarter thrust level booster. Two sizes of hybrid boosters were configured for either pump-fed or pressure-fed oxygen feed systems. Performance analyses show improved payload capability relative to a solid propellant booster. Size optimization and fuel safety considerations resulted in a 4.57 m (180 inch) diameter large booster with an inert hydrocarbon fuel. The preferred diameter for the quarter thrust level booster is 2.53 m (96 inches). The demonstration plan would culminate with test firings of a 3.05 m (120 inch) diameter hybrid booster.

  18. 77 FR 7095 - Transitional Program for Covered Business Method Patents-Definition of Technological Invention

    Science.gov (United States)

    2012-02-10

    ... 0651-AC75 Transitional Program for Covered Business Method Patents-- Definition of Technological... definition of technological invention that the Board will use in conducting transitional covered business... definition for covered business method patent in proposed Sec. 42.301(a). Additionally, the Office in a...

  19. Monitoring and control requirement definition study for Dispersed Storage and Generation (DSG). Volume 2, appendix A: Selected DSG technologies and their general control requirements

    Science.gov (United States)

    1980-01-01

    A consistent approach was sought for both hardware and software which will handle the monitoring and control necessary to integrate a number of different DSG technologies into a common distribution dispatch network. It appears that the control of each of the DSG technologies is compatible with a supervisory control method of operation that lends itself to remote control from a distribution dispatch center.

  20. Mars power system concept definition study. Volume 2: Appendices

    Science.gov (United States)

    Littman, Franklin D.

    1994-01-01

    This report documents the work performed by Rockwell International's Rocketdyne Division on NASA Contract No. NAS3-25808 (Task Order No. 16) entitled 'Mars Power System Definition Study'. This work was performed for NASA's Lewis Research Center (LeRC). The report is divided into two volumes as follows: Volume 1 - Study Results; and Volume 2 - Appendices. The results of the power system characterization studies, operations studies, and technology evaluations are summarized in Volume 1. The appendices include complete, standalone technology development plans for each candidate power system that was investigated.

  1. Design definition study of a life/cruise fan technology V/STOL aircraft. Volume 2, addendum 2: Program risk assessment

    Science.gov (United States)

    1975-01-01

    The results are presented of a risk assessment study conducted on two technology aircraft. The aircraft system components were reviewed and assessed for risk based on: (1) complexity relative to state-of-the-art, (2) manufacturing and qualification testing, (3) availability and delays, and (4) cost/schedule impact. These assessments were based on five risk nomenclatures: low, minor, moderate, high, and extreme. Each aircraft system was assigned an overall risk rating depending upon its contribution to the capability of the aircraft to achieve the performance goals. The slightly lower Sabreliner performance margin is due to the restricted flight envelope, the fixed landing gear, and internal fuel capacity. The Sabreliner with retractable gear and allowed to fly at its best speed and altitude would reflect performance margins similar to the New Airframe. These significant margins, inherent with the MCAIR three gas generator/three fan propulsion system, are major modifiers to risk assessment of both aircraft. The estimated risk and the associated key system and performance areas are tabulated.

  2. Design definition study of a NASA/Navy lift/cruise fan technology V/STOL airplane: Risk assessment addendum to the final report

    Science.gov (United States)

    Zabinsky, J. M.; Burnham, R. W.; Flora, C. C.; Gotlieb, P.; Grande, D. L.; Gunnarson, D. W.; Howard, W. M.; Hunt, D.; Jakubowski, G. W.; Johnson, P. E.

    1975-01-01

    An assessment of risk, in terms of delivery delays, cost overrun, and performance achievement, associated with the V/STOL technology airplane is presented. The risk is discussed in terms of weight, structure, aerodynamics, propulsion, mechanical drive, and flight controls. The analysis ensures that risks associated with the design and development of the airplane will be eliminated in the course of the program and a useful technology airplane that meets the predicted cost, schedule, and performance can be produced.

  3. "It Is Definitely a Game Changer": A Qualitative Study of Experiences with In-home Overnight Closed-Loop Technology Among Adults with Type 1 Diabetes.

    Science.gov (United States)

    Hendrieckx, Christel; Poole, Lucinda A; Sharifi, Amin; Jayawardene, Dilshani; Loh, Margaret M; Horsburgh, Jodie C; Bach, Leon A; Colman, Peter G; Kumareswaran, Kavita; Jenkins, Alicia J; MacIsaac, Richard J; Ward, Glenn M; Grosman, Benyamin; Roy, Anirban; O'Neal, David N; Speight, Jane

    2017-07-01

    This qualitative study explored trial participants' experiences of four nights of in-home closed loop. Sixteen adults with type 1 diabetes, who completed a randomized crossover trial, were interviewed after four consecutive nights of closed-loop. Interviews were audio recorded, transcribed, and analyzed with a coding framework developed to identify the main themes. Participants had a mean age of 42 ± 10 years, nine were women; mean diabetes duration was 27 ± 7 years, and all were using insulin pumps. Overall, first impressions were positive. Participants found closed-loop easy to use and understand. Most experienced more stable overnight glucose levels, although for some these were similar to usual care or higher than they expected. Compared with their usual treatment, they noticed the proactive nature of the closed-loop, being able to predict trends and deliver micro amounts of insulin. Most reported technical glitches or inconveniences during one or more nights, such as transmission problems, problematic connectivity between devices, ongoing alarms despite addressing low glucose levels, and sensor inaccuracy. Remote monitoring by the trial team and their own hypoglycemic awareness contributed to feelings of trust and safety. Although rare, safety concerns were raised, related to feeling unsure whether the system would respond in time to falling glucose levels. This study provides relevant insights for implementation of closed-loop in the real world. For people with diabetes who are less familiar with technology, remote monitoring for the first few days may provide reassurance, strengthen their trust/skills, and make closed-loop an acceptable option for more people with type 1 diabetes.

  4. Nuclear technology terms and definitions. Radiation protection. Draft. Kerntechnik. Begriffe. Strahlenschutz. Entwurf

    Energy Technology Data Exchange (ETDEWEB)

    1979-02-01

    The terms and definitions in this standard are part of the catalogue of definitions 'Nuclear technology, terms and definitions', in eight parts; they are the latest version of the standards and draft standards of DIN 25 401, part 10 to 19, published at irregular intervals until now. (orig.).

  5. Human Performance Technology (HPT): An Examination of Definitions through Dependent and Independent Variables.

    Science.gov (United States)

    Irlbeck, Sonja A.

    2002-01-01

    Provides a chronological perspective of human performance technology (HPT) definitions and an evaluation of them in terms of independent and dependent variables. Discusses human competence and performance technology and compares the definitions with the goals that have been articulated for HPT. (Author/LRW)

  6. Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Current and advanced act control system definition study, volume 1

    Science.gov (United States)

    Hanks, G. W.; Shomber, H. A.; Dethman, H. A.; Gratzer, L. B.; Maeshiro, A.; Gangsaas, D.; Blight, J. D.; Buchan, S. M.; Crumb, C. B.; Dorwart, R. J.

    1981-01-01

    An active controls technology (ACT) system architecture was selected based on current technology system elements and optimal control theory was evaluated for use in analyzing and synthesizing ACT multiple control laws. The system selected employs three redundant computers to implement all of the ACT functions, four redundant smaller computers to implement the crucial pitch-augmented stability function, and a separate maintenance and display computer. The reliability objective of probability of crucial function failure of less than 1 x 10 to the -9th power per flight of 1 hr can be met with current technology system components, if the software is assumed fault free and coverage approaching 1.0 can be provided. The optimal control theory approach to ACT control law synthesis yielded comparable control law performance much more systematically and directly than the classical s-domain approach. The ACT control law performance, although somewhat degraded by the inclusion of representative nonlinearities, remained quite effective. Certain high-frequency gust-load alleviation functions may require increased surface rate capability.

  7. Science Mission Definition Studies for TROPIX

    Science.gov (United States)

    Fennell, J. F.

    1997-01-01

    This document summarizes the results of mission definition studies for solar electric propulsion missions that have been carried out over the last approximately three years. The major output from the studies has been two proposals which were submitted to NASA in response to Announcements of Opportunity for missions and an ongoing Global Magnetospheric Dynamics mission study. The bulk of this report consists of copies of the proposals and preliminary materials from the GMD study that will be completed in the coming months.

  8. Definition of technology development missions for early Space Station satellite servicing. Volume 1: Executive summary

    Science.gov (United States)

    1984-01-01

    The Executive Summary volume 1, includes an overview of both phases of the Definition of Technology Development Missions for Early Space Station Satellite Servicing. The primary purpose of Phase 1 of the Marshall Space Flight Center (MSFC) Satellite Servicing Phase 1 study was to establish requirements for demonstrating the capability of performing satellite servicing activities on a permanently manned Space Station in the early 1990s. The scope of Phase 1 included TDM definition, outlining of servicing objectives, derivation of initial Space Station servicing support requirements, and generation of the associated programmatic schedules and cost. The purpose of phase 2 of the satellite servicing study was to expand and refine the overall understanding of how best to use the manned space station as a test bed for demonstration of satellite servicing capabilities.

  9. International comparison of the definition and the practical application of health technology assessment.

    Science.gov (United States)

    Draborg, Eva; Gyrd-Hansen, Dorte; Poulsen, Peter Bo; Horder, Mogens

    2005-01-01

    Health Technology Assessment (HTA) is defined as a policy research approach that examines the short- and long-term social consequences of the application or use of technology. Internationally different institutions have translated this definition to local contexts. In Denmark, HTA is comprehensive with focus on four aspects of the problem in question (technology [clinical evidence], economy, patient, and organization). The objective of this study is to study how the application of HTA differs across leading countries and to study the extent to which Danish HTA reports differ from foreign HTAs. A sample of 433 HTA reports published in the period 1989--2002 by eleven leading institutions or agencies in Denmark and eight other countries were reviewed. We looked at the characteristics of the HTA with respect to focus on the four main aspects and the manner in which each aspect has been approached. The study shows health technology procedures to be the most common type of health technology assessed in HTAs and literature review to be the most often used method of analysis. Policy recommendations are only present in approximately half of the HTA reports. In the HTAs one generally sees a great focus on the clinical aspect of health technologies, leaving the economic, the patient-related, and the organizational aspect much more unanalyzed. The Danish HTAs generally have a wider scope than HTAs produced in other countries and tend to focus more frequently on patient-related and organizational dimensions.

  10. Basic Definitions and Concepts of Systems Approach, Mathematical Modeling and Information Technologies in Sports Science

    Directory of Open Access Journals (Sweden)

    А. Лопатьєв

    2017-09-01

    Full Text Available The objective is to systematize and adapt the basic definitions and concepts of the systems approach, mathematical modeling and information technologies to sports science. Materials and methods. The research has studied the availability of appropriate terms in shooting sports, which would meet the requirements of modern sports science. It has examined the compliance of the shooting sports training program for children and youth sports schools, the Olympic reserve specialized children and youth schools, schools of higher sports skills, and sports educational institutions with the modern requirements and principles. Research results. The paper suggests the basic definitions adapted to the requirements of technical sports and sports science. The research has thoroughly analyzed the shooting sports training program for children and youth sports schools, the Olympic reserve specialized children and youth schools, schools of higher sports skills, and sports educational institutions. The paper offers options to improve the training program in accordance with the modern tendencies of training athletes.  Conclusions. The research suggests to systematize and adapt the basic definitions and concepts of the systems approach, mathematical modeling and information technologies using the example of technical sports.

  11. Definition of technology development missions for early space stations: Large space structures

    Science.gov (United States)

    Gates, R. M.; Reid, G.

    1984-01-01

    The objectives studied are the definition of the tested role of an early Space Station for the construction of large space structures. This is accomplished by defining the LSS technology development missions (TDMs) identified in phase 1. Design and operations trade studies are used to identify the best structural concepts and procedures for each TDMs. Details of the TDM designs are then developed along with their operational requirements. Space Station resources required for each mission, both human and physical, are identified. The costs and development schedules for the TDMs provide an indication of the programs needed to develop these missions.

  12. Emerging Technologies Integrating Technology into Study Abroad

    Science.gov (United States)

    Godwin-Jones, Robert

    2016-01-01

    "Ready access to travel and to technology-enhanced social networking (e.g., Facebook or Skype) has changed the nature of study abroad to the point where today's experiences are fundamentally different from those of earlier eras" (Kinginger, 2013a, p. 345). In addition to more travel options and greater technology availability, study…

  13. Students' Guided Reinvention of Definition of Limit of a Sequence with Interactive Technology

    Science.gov (United States)

    Flores, Alfinio; Park, Jungeun

    2016-01-01

    In a course emphasizing interactive technology, 19 students, including 18 mathematics education majors, mostly in their first year, reinvented the definition of limit of a sequence while working in small cooperative groups. The class spent four sessions of 75 minutes each on a cyclical process of guided reinvention of the definition of limit of a…

  14. The MSFC Collaborative Engineering Process for Preliminary Design and Concept Definition Studies

    Science.gov (United States)

    Mulqueen, Jack; Jones, David; Hopkins, Randy

    2011-01-01

    This paper describes a collaborative engineering process developed by the Marshall Space Flight Center's Advanced Concepts Office for performing rapid preliminary design and mission concept definition studies for potential future NASA missions. The process has been developed and demonstrated for a broad range of mission studies including human space exploration missions, space transportation system studies and in-space science missions. The paper will describe the design team structure and specialized analytical tools that have been developed to enable a unique rapid design process. The collaborative engineering process consists of integrated analysis approach for mission definition, vehicle definition and system engineering. The relevance of the collaborative process elements to the standard NASA NPR 7120.1 system engineering process will be demonstrated. The study definition process flow for each study discipline will be will be outlined beginning with the study planning process, followed by definition of ground rules and assumptions, definition of study trades, mission analysis and subsystem analyses leading to a standardized set of mission concept study products. The flexibility of the collaborative engineering design process to accommodate a wide range of study objectives from technology definition and requirements definition to preliminary design studies will be addressed. The paper will also describe the applicability of the collaborative engineering process to include an integrated systems analysis approach for evaluating the functional requirements of evolving system technologies and capabilities needed to meet the needs of future NASA programs.

  15. Educational Potential of Case-Study Technology

    OpenAIRE

    Fedorinova, Zoya; Vorobeva, Victoria; Malyanova, Marina

    2015-01-01

    This article presents the results of phenomenological and typological analysis of case-study technology educational potential. The definition “educational potential of case-study technology” is given, the main characteristics of which are changed in communication and collaborative activity quality, appearance of educational initiatives, change of participants’ position in learning process, formation of “collective subject” in collaborative activity, increase of learning (subject) results. Dep...

  16. Mars power system concept definition study. Volume 1: Study results

    Science.gov (United States)

    Littman, Franklin D.

    1994-01-01

    A preliminary top level study was completed to define power system concepts applicable to Mars surface applications. This effort included definition of power system requirements and selection of power systems with the potential for high commonality. These power systems included dynamic isotope, Proton Exchange Membrane (PEM) regenerative fuel cell, sodium sulfur battery, photovoltaic, and reactor concepts. Design influencing factors were identified. Characterization studies were then done for each concept to determine system performance, size/volume, and mass. Operations studies were done to determine emplacement/deployment maintenance/servicing, and startup/shutdown requirements. Technology development roadmaps were written for each candidate power system (included in Volume 2). Example power system architectures were defined and compared on a mass basis. The dynamic isotope power system and nuclear reactor power system architectures had significantly lower total masses than the photovoltaic system architectures. Integrated development and deployment time phasing plans were completed for an example DIPS and reactor architecture option to determine the development strategies required to meet the mission scenario requirements.

  17. Explanatory Definitions of the Technology Push Success Factors

    Directory of Open Access Journals (Sweden)

    Jari Matti Sarja

    2015-04-01

    Full Text Available The main task for most development-intensive organizations is to create, develop and commercialize new products and services. Because development processes are risky and failure rates are high, especially in the case of technology pushed projects, unambiguous success factors are valuable knowledge for the management of development-intensive firms. New product development and innovation literature has presented many success factors for developed products, but, unfortunately, many of them are nebulous in nature. The aim of this paper is to clarify what elements comprise the exact factors. After an extensive review and screening of the technology push success factor related literature, a total of 13 success factors were rationalized and transcribed according the previous literature. As a result, three separate keynotes were recognized, and the survey instrument framework was proposed. The practical relevance of this study is to help firm management to recognize the real actions needed to reduce product development risks and also to help scholars to focus on key issues when studying the key factors of breakthrough development cases.

  18. U. S. Companies leapfrog foreign HDTV technology. [High definition television (HDTV)

    Energy Technology Data Exchange (ETDEWEB)

    Greenberger, L.S.

    1991-02-01

    This article discusses high definition television (HDTV) development and the current leading of the technology by US firms as an unforeseen event. The use of data compression and digital transmission technology is the basis of the recent advance by US firms. The design is briefly discussed and the other manufacturers methods for HDTV are reviewed. The possible response of the FCC to recent submittal revisions to incorporate the new technology is discussed.

  19. Current Status and Application of Hazard Definition Technology

    Science.gov (United States)

    Greene, George C.

    1997-01-01

    A research is performed: to define wake non-encounter & hazard, to provide requirements for sensors, and to obtain input from the user community. This research includes: validating wake encounter simulation models, establishing a metric to quantify the upset potential of a wake encounter, applying hazard metric and simulation models to the commercial fleet for development of candidate acceptable encounter limits, and applying technology to near term problems to evaluate current status of technology. The following lessons are learned from this project: technology is not adequate to determine absolute spacing requirements; time, not distance, determines the duration of the wake hazard; Optimum standards depend on the traffic; Wing span is an important parameter for characterizing both generator and follower; and Short span "biz jets" are easily rolled.

  20. National Biomedical Tracer Facility: Project definition study

    International Nuclear Information System (INIS)

    Heaton, R.; Peterson, E.; Smith, P.

    1995-01-01

    The Los Alamos National Laboratory is an ideal institution and New Mexico is an ideal location for siting the National Biomedical Tracer Facility (NBTF). The essence of the Los Alamos proposal is the development of two complementary irradiation facilities that combined with our existing radiochemical processing hot cell facilities and waste handling and disposal facilities provide a low cost alternative to other proposals that seek to satisfy the objectives of the NBTF. We propose the construction of a 30 MeV cyclotron facility at the site of the radiochemical facilities, and the construction of a 100 MeV target station at LAMPF to satisfy the requirements and objectives of the NBTF. We do not require any modifications to our existing radiochemical processing hot cell facilities or our waste treatment and disposal facilities to accomplish the objectives of the NBTF. The total capital cost for the facility defined by the project definition study is $15.2 M. This cost estimate includes $9.9 M for the cyclotron and associated facility, $2.0 M for the 100 MeV target station at LAMPF, and $3.3 M for design

  1. National Biomedical Tracer Facility: Project definition study

    Energy Technology Data Exchange (ETDEWEB)

    Heaton, R.; Peterson, E. [Los Alamos National Lab., NM (United States); Smith, P. [Smith (P.A.) Concepts and Designs (United States)

    1995-05-31

    The Los Alamos National Laboratory is an ideal institution and New Mexico is an ideal location for siting the National Biomedical Tracer Facility (NBTF). The essence of the Los Alamos proposal is the development of two complementary irradiation facilities that combined with our existing radiochemical processing hot cell facilities and waste handling and disposal facilities provide a low cost alternative to other proposals that seek to satisfy the objectives of the NBTF. We propose the construction of a 30 MeV cyclotron facility at the site of the radiochemical facilities, and the construction of a 100 MeV target station at LAMPF to satisfy the requirements and objectives of the NBTF. We do not require any modifications to our existing radiochemical processing hot cell facilities or our waste treatment and disposal facilities to accomplish the objectives of the NBTF. The total capital cost for the facility defined by the project definition study is $15.2 M. This cost estimate includes $9.9 M for the cyclotron and associated facility, $2.0 M for the 100 MeV target station at LAMPF, and $3.3 M for design.

  2. Assessment of three-dimensional high-definition visualization technology to perform microvascular anastomosis.

    Science.gov (United States)

    Wong, Alex K; Davis, Gabrielle B; Nguyen, T JoAnna; Hui, Kenneth J W S; Hwang, Brian H; Chan, Linda S; Zhou, Zhao; Schooler, Wesley G; Chandrasekhar, Bala S; Urata, Mark M

    2014-07-01

    Traditional visualization techniques in microsurgery require strict positioning in order to maintain the field of visualization. However, static posturing over time may lead to musculoskeletal strain and injury. Three-dimensional high-definition (3DHD) visualization technology may be a useful adjunct to limiting static posturing and improving ergonomics in microsurgery. In this study, we aimed to investigate the benefits of using the 3DHD technology over traditional techniques. A total of 14 volunteers consisting of novice and experienced microsurgeons performed femoral anastomoses on male Sprague-Dawley retired breeder rats using traditional techniques as well as the 3DHD technology and compared the two techniques. Participants subsequently completed a questionnaire regarding their preference in terms of operational parameters, ergonomics, overall quality, and educational benefits. Efficiency was also evaluated by mean times to complete the anastomosis with each technique. A total of 27 anastomoses were performed, 14 of 14 using the traditional microscope and 13 of 14 using the 3DHD technology. Preference toward the traditional modality was noted with respect to the parameters of precision, field adjustments, zoom and focus, depth perception, and overall quality. The 3DHD technique was preferred for improved stamina and less back and eye strain. Participants believed that the 3DHD technique was the better method for learning microsurgery. Longer mean time of anastomosis completion was noted in participants utilizing the 3DHD technique. The 3DHD technology may prove to be valuable in improving proper ergonomics in microsurgery. In addition, it may be useful in medical education when applied to the learning of new microsurgical skills. More studies are warranted to determine its efficacy and safety in a clinical setting. Copyright © 2014 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

  3. Integrated technology rotor/flight research rotor hub concept definition

    Science.gov (United States)

    Dixon, P. G. C.

    1983-01-01

    Two variations of the helicopter bearingless main rotor hub concept are proposed as bases for further development in the preliminary design phase of the Integrated Technology Rotor/Flight Research Rotor (ITR/FRR) program. This selection was the result of an evaluation of three bearingless hub concepts and two articulated hub concepts with elastomeric bearings. The characteristics of each concept were evaluated by means of simplified methodology. These characteristics included the assessment of stability, vulnerability, weight, drag, cost, stiffness, fatigue life, maintainability, and reliability.

  4. Solar dynamic power system definition study

    Science.gov (United States)

    Wallin, Wayne E.; Friefeld, Jerry M.

    1988-01-01

    The solar dynamic power system design and analysis study compared Brayton, alkali-metal Rankine, and free-piston Stirling cycles with silicon planar and GaAs concentrator photovoltaic power systems for application to missions beyond the Phase 2 Space Station level of technology for all power systems. Conceptual designs for Brayton and Stirling power systems were developed for 35 kWe and 7 kWe power levels. All power systems were designed for 7-year end-of-life conditions in low Earth orbit. LiF was selected for thermal energy storage for the solar dynamic systems. Results indicate that the Stirling cycle systems have the highest performance (lowest weight and area) followed by the Brayton cycle, with photovoltaic systems considerably lower in performance. For example, based on the performance assumptions used, the planar silicon power system weight was 55 to 75 percent higher than for the Stirling system. A technology program was developed to address areas wherein significant performance improvements could be realized relative to the current state-of-the-art as represented by Space Station. In addition, a preliminary evaluation of hardenability potential found that solar dynamic systems can be hardened beyond the hardness inherent in the conceptual designs of this study.

  5. Propulsion/flight control integration technology (PROFIT) software system definition

    Science.gov (United States)

    Carlin, C. M.; Hastings, W. J.

    1978-01-01

    The Propulsion Flight Control Integration Technology (PROFIT) program is designed to develop a flying testbed dedicated to controls research. The control software for PROFIT is defined. Maximum flexibility, needed for long term use of the flight facility, is achieved through a modular design. The Host program, processes inputs from the telemetry uplink, aircraft central computer, cockpit computer control and plant sensors to form an input data base for use by the control algorithms. The control algorithms, programmed as application modules, process the input data to generate an output data base. The Host program formats the data for output to the telemetry downlink, the cockpit computer control, and the control effectors. Two applications modules are defined - the bill of materials F-100 engine control and the bill of materials F-15 inlet control.

  6. High definition TV projection via single crystal faceplate technology

    Science.gov (United States)

    Kindl, H. J.; St. John, Thomas

    1993-03-01

    Single crystal phosphor faceplates are epitaxial phosphors grown on crystalline substrates with the advantages of high light output, resolution, and extended operational life. Single crystal phosphor faceplate industrial technology in the United States is capable of providing a faceplate appropriate to the projection industry of up to four (4) inches in diameter. Projection systems incorporating cathode ray tubes utilizing single crystal phosphor faceplates will produce 1500 lumens of white light with 1000 lines of resolution, non-interlaced. This 1500 lumen projection system will meet all of the currently specified luminance and resolution requirements of Visual Display systems for flight simulators. Significant logistic advantages accrue from the introduction of single crystal phosphor faceplate CRT's. Specifically, the full performance life of a CRT is expected to increase by a factor of five (5); ie, from 2000 to 10,000 hours of operation. There will be attendant reductions in maintenance time, spare CRT requirements, system down time, etc. The increased brightness of the projection system will allow use of lower gain, lower cost simulator screen material. Further, picture performance characteristics will be more balanced across the full simulator.

  7. Task 4 supporting technology. Densification requirements definition and test objectives. Propellant densification requirements definition

    Science.gov (United States)

    Lak, Tibor; Weeks, D. P.

    1995-01-01

    The primary challenge of the X-33 CAN is to build and test a prototype LO2 and LH2 densification ground support equipment (GSE) unit, and perform tank thermodynamic testing within the 15 month phase 1 period. The LO2 and LH2 propellant densification system will be scaled for the IPTD LO2 and LH2 tank configurations. The IPTD tanks were selected for the propellant technology demonstration because of the potential benefits to the phase 1 plan: tanks will be built in time to support thermodynamic testing; minimum cost; minimum schedule risk; future testing at MSFC will build on phase 1 data base; and densification system will be available to support X-33 and RLV engine test at IPTD. The objective of the task 1 effort is to define the preliminary requirements of the propellant densification GSE and tank recirculation system. The key densification system design parameters to be established in Task 1 are: recirculation flow rate; heat exchanger inlet temperature; heat exchanger outlet temperature; maximum heat rejection rate; vent flow rate (GN2 and GH2); densification time; and tank pressure level.

  8. Feasibility studies and technological innovation

    DEFF Research Database (Denmark)

    Hvelplund, Frede Kloster; Lund, Henrik; Sukkumnoed, Decharut

    2004-01-01

    The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives.......The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives....

  9. AFCI Safeguards Enhancement Study: Technology Development Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Leon E.; Dougan, A.; Tobin, Stephen; Cipiti, B.; Ehinger, Michael H.; Bakel, A. J.; Bean, Robert; Grate, Jay W.; Santi, P.; Bryan, Steven; Kinlaw, M. T.; Schwantes, Jon M.; Burr, Tom; Lehn, Scott A.; Tolk, K.; Chichester, David; Menlove, H.; Vo, D.; Duckworth, Douglas C.; Merkle, P.; Wang, T. F.; Duran, F.; Nakae, L.; Warren, Glen A.; Friedrich, S.; Rabin, M.

    2008-12-31

    The Advanced Fuel Cycle Initiative (AFCI) Safeguards Campaign aims to develop safeguards technologies and processes that will significantly reduce the risk of proliferation in the U.S. nuclear fuel cycle of tomorrow. The Safeguards Enhancement Study was chartered with identifying promising research and development (R&D) directions over timescales both near-term and long-term, and under safeguards oversight both domestic and international. This technology development roadmap documents recognized gaps and needs in the safeguarding of nuclear fuel cycles, and outlines corresponding performance targets for each of those needs. Drawing on the collective expertise of technologists and user-representatives, a list of over 30 technologies that have the potential to meet those needs was developed, along with brief summaries of each candidate technology. Each summary describes the potential impact of that technology, key research questions to be addressed, and prospective development milestones that could lead to a definitive viability or performance assessment. Important programmatic linkages between U.S. agencies and offices are also described, reflecting the emergence of several safeguards R&D programs in the U.S. and the reinvigoration of nuclear fuel cycles across the globe.

  10. Health technology assessment (HTA): definition, role and use in the changing healthcare environment.

    Science.gov (United States)

    Gallio, D; Berto, P

    2007-01-01

    The increasing availability of health care technology--boosted by considerable advances in areas like biotechnology, biomaterials, surgical techniques and computer technology--has accompanied burgeoning health care costs, and for this reason an increasing number of subjects (clinicians, health product makers, regulators, patients, hospitals, managers, payers, government leaders) demand for well-founded information to support decisions about development, adoption, acquisition and use of new and existing technologies. Technology assessment is a form of policy research that identifies policy issues, assesses the impact of alternative courses of action, and presents findings. This article is aimed at describing the historical development, reviewing the various definition and classifications, illustrating the purposes Fnd actors of Health Technology Assessment and its possible applications in the current healthcare scenario.

  11. Conceptual definition of a technology development mission for advanced solar dynamic power systems

    Science.gov (United States)

    Migra, R. P.

    1986-01-01

    An initial conceptual definition of a technology development mission for advanced solar dynamic power systems is provided, utilizing a space station to provide a dedicated test facility. The advanced power systems considered included Brayton, Stirling, and liquid metal Rankine systems operating in the temperature range of 1040 to 1400 K. The critical technologies for advanced systems were identified by reviewing the current state of the art of solar dynamic power systems. The experimental requirements were determined by planning a system test of a 20 kWe solar dynamic power system on the space station test facility. These requirements were documented via the Mission Requirements Working Group (MRWG) and Technology Development Advocacy Group (TDAG) forms. Various concepts or considerations of advanced concepts are discussed. A preliminary evolutionary plan for this technology development mission was prepared.

  12. Life sciences payload definition and integration study, task C and D. Volume 2: Payload definition, integration, and planning studies

    Science.gov (United States)

    1973-01-01

    The Life Sciences Payload Definition and Integration Study was composed of four major tasks. Tasks A and B, the laboratory definition phase, were the subject of prior NASA study. The laboratory definition phase included the establishment of research functions, equipment definitions, and conceptual baseline laboratory designs. These baseline laboratories were designated as Maxi-Nom, Mini-30, and Mini-7. The outputs of Tasks A and B were used by the NASA Life Sciences Payload Integration Team to establish guidelines for Tasks C and D, the laboratory integration phase of the study. A brief review of Tasks A and B is presented provide background continuity. The tasks C and D effort is the subject of this report. The Task C effort stressed the integration of the NASA selected laboratory designs with the shuttle sortie module. The Task D effort updated and developed costs that could be used by NASA for preliminary program planning.

  13. Nuclear medicine technology study guide

    CERN Document Server

    Patel, Dee

    2011-01-01

    Nuclear Medicine Technology Study Guide presents a comprehensive review of nuclear medicine principles and concepts necessary for technologists to pass board examinations. The practice questions and content follow the guidelines of the Nuclear Medicine Technology Certification Board (NMTCB) and American Registry of Radiological Technologists (ARRT), allowing test takers to maximize their success in passing the examinations. The book is organized by sections of increasing difficulty, with over 600 multiple-choice questions covering all areas of nuclear medicine, including radiation safety; radi

  14. National Biomedical Tracer Facility. Project definition study

    Energy Technology Data Exchange (ETDEWEB)

    Schafer, R.

    1995-02-14

    We request a $25 million government-guaranteed, interest-free loan to be repaid over a 30-year period for construction and initial operations of a cyclotron-based National Biomedical Tracer Facility (NBTF) in North Central Texas. The NBTF will be co-located with a linear accelerator-based commercial radioisotope production facility, funded by the private sector at approximately $28 million. In addition, research radioisotope production by the NBTF will be coordinated through an association with an existing U.S. nuclear reactor center that will produce research and commercial radioisotopes through neutron reactions. The combined facilities will provide the full range of technology for radioisotope production and research: fast neutrons, thermal neutrons, and particle beams (H{sup -}, H{sup +}, and D{sup +}). The proposed NBTF facility includes an 80 MeV, 1 mA H{sup -} cyclotron that will produce proton-induced (neutron deficient) research isotopes.

  15. National Biomedical Tracer Facility. Project definition study

    International Nuclear Information System (INIS)

    Schafer, R.

    1995-01-01

    We request a $25 million government-guaranteed, interest-free loan to be repaid over a 30-year period for construction and initial operations of a cyclotron-based National Biomedical Tracer Facility (NBTF) in North Central Texas. The NBTF will be co-located with a linear accelerator-based commercial radioisotope production facility, funded by the private sector at approximately $28 million. In addition, research radioisotope production by the NBTF will be coordinated through an association with an existing U.S. nuclear reactor center that will produce research and commercial radioisotopes through neutron reactions. The combined facilities will provide the full range of technology for radioisotope production and research: fast neutrons, thermal neutrons, and particle beams (H - , H + , and D + ). The proposed NBTF facility includes an 80 MeV, 1 mA H - cyclotron that will produce proton-induced (neutron deficient) research isotopes

  16. New Technologies for Studying Biofilms

    Science.gov (United States)

    FRANKLIN, MICHAEL J.; CHANG, CONNIE; AKIYAMA, TATSUYA; BOTHNER, BRIAN

    2016-01-01

    Bacteria have traditionally been studied as single-cell organisms. In laboratory settings, aerobic bacteria are usually cultured in aerated flasks, where the cells are considered essentially homogenous. However, in many natural environments, bacteria and other microorganisms grow in mixed communities, often associated with surfaces. Biofilms are comprised of surface-associated microorganisms, their extracellular matrix material, and environmental chemicals that have adsorbed to the bacteria or their matrix material. While this definition of a biofilm is fairly simple, biofilms are complex and dynamic. Our understanding of the activities of individual biofilm cells and whole biofilm systems has developed rapidly, due in part to advances in molecular, analytical, and imaging tools and the miniaturization of tools designed to characterize biofilms at the enzyme level, cellular level, and systems level. PMID:26350329

  17. Technological Studies at Thomas Edison Middle School. Grades 6-7-8.

    Science.gov (United States)

    Foster, Patrick N.

    This technology studies curriculum for grades 6-8 is a plan for each middle school student to experience technology education for approximately 60 days (1 trimester of a 180-day school year) in each grade. Section A provides definitions; structure or content for grade-level programs with science and technology unifiers (unifying curricular…

  18. Zero-gravity cloud physics laboratory: Candidate experiments definition and preliminary concept studies

    Science.gov (United States)

    Eaton, L. R.; Greco, R. V.; Hollinden, A. B.

    1973-01-01

    The candidate definition studies on the zero-g cloud physics laboratory are covered. This laboratory will be an independent self-contained shuttle sortie payload. Several critical technology areas have been identified and studied to assure proper consideration in terms of engineering requirements for the final design. Areas include chambers, gas and particle generators, environmental controls, motion controls, change controls, observational techniques, and composition controls. This unique laboratory will allow studies to be performed without mechanical, aerodynamics, electrical, or other type techniques to support the object under study. This report also covers the candidate experiment definitions, chambers and experiment classes, laboratory concepts and plans, special supporting studies, early flight opportunities and payload planning data for overall shuttle payload requirements assessments.

  19. Study of Membrane Reflector Technology

    Science.gov (United States)

    Knapp, K.; Hedgepeth, J.

    1979-01-01

    Very large reflective surfaces are required by future spacecraft for such purposes as solar energy collection, antenna surfaces, thermal control, attitude and orbit control with solar pressure, and solar sailing. The performance benefits in large membrane reflector systems, which may be derived from an advancement of this film and related structures technology, are identified and qualified. The results of the study are reported and summarized. Detailed technical discussions of various aspects of the study are included in several separate technical notes which are referenced.

  20. Use of High-Definition Audiovisual Technology in a Gross Anatomy Laboratory: Effect on Dental Students' Learning Outcomes and Satisfaction.

    Science.gov (United States)

    Ahmad, Maha; Sleiman, Naama H; Thomas, Maureen; Kashani, Nahid; Ditmyer, Marcia M

    2016-02-01

    Laboratory cadaver dissection is essential for three-dimensional understanding of anatomical structures and variability, but there are many challenges to teaching gross anatomy in medical and dental schools, including a lack of available space and qualified anatomy faculty. The aim of this study was to determine the efficacy of high-definition audiovisual educational technology in the gross anatomy laboratory in improving dental students' learning outcomes and satisfaction. Exam scores were compared for two classes of first-year students at one U.S. dental school: 2012-13 (no audiovisual technology) and 2013-14 (audiovisual technology), and section exams were used to compare differences between semesters. Additionally, an online survey was used to assess the satisfaction of students who used the technology. All 284 first-year students in the two years (2012-13 N=144; 2013-14 N=140) participated in the exams. Of the 140 students in the 2013-14 class, 63 completed the survey (45% response rate). The results showed that those students who used the technology had higher scores on the laboratory exams than those who did not use it, and students in the winter semester scored higher (90.17±0.56) than in the fall semester (82.10±0.68). More than 87% of those surveyed strongly agreed or agreed that the audiovisual devices represented anatomical structures clearly in the gross anatomy laboratory. These students reported an improved experience in learning and understanding anatomical structures, found the laboratory to be less overwhelming, and said they were better able to follow dissection instructions and understand details of anatomical structures with the new technology. Based on these results, the study concluded that the ability to provide the students a clear view of anatomical structures and high-quality imaging had improved their learning experience.

  1. Danish Approaches in Social Studies of Technology

    DEFF Research Database (Denmark)

    Munch, Birgitte

    1995-01-01

    Danish contribution to a EU-COST A4 action analysing the emergence of social studies of technology, the Science-Technology-Society field and the 'new sociology' of technology in Europe.......Danish contribution to a EU-COST A4 action analysing the emergence of social studies of technology, the Science-Technology-Society field and the 'new sociology' of technology in Europe....

  2. Developing a Framework for Analyzing Definitions: A Study of "The Feynman Lectures"

    Science.gov (United States)

    Wong, Chee Leong; Chu, Hye-Eun; Yap, Kueh Chin

    2014-01-01

    One important purpose of a definition is to explain the meaning of a word. Any problems associated with a definition may impede students' learning. However, research studies on the definitional problems from the perspective of physics education are limited. Physics educators may not be aware of the nature and extent of definitional problems.…

  3. High Definition Colonoscopy Combined with i-SCAN Imaging Technology Is Superior in the Detection of Adenomas and Advanced Lesions Compared to High Definition Colonoscopy Alone.

    Science.gov (United States)

    Bowman, Erik A; Pfau, Patrick R; Mitra, Arnab; Reichelderfer, Mark; Gopal, Deepak V; Hall, Benjamin S; Benson, Mark E

    2015-01-01

    Background. Improved detection of adenomatous polyps using i-SCAN has mixed results in small studies. Utility of i-SCAN as a primary surveillance modality for colorectal cancer screening during colonoscopy is uncertain. Aim. Comparing high definition white light endoscopy (HDWLE) to i-SCAN in their ability to detect adenomas during colonoscopy. Methods. Prospective cohort study of 1936 average risk patients who had a screening colonoscopy at an ambulatory procedure center. Patients underwent colonoscopy with high definition white light endoscopy withdrawal versus i-SCAN withdrawal during endoscopic screening exam. Primary outcome measurement was adenoma detection rate for i-SCAN versus high definition white light endoscopy. Secondary measurements included polyp size, pathology, and morphology. Results. 1007 patients underwent colonoscopy with i-SCAN and 929 with HDWLE. 618 adenomas were detected in the i-SCAN group compared to 402 in the HDWLE group (p definition white light endoscopy.

  4. Definition of technology development missions for early space stations. Large space structures, phase 2, midterm review

    Science.gov (United States)

    1984-01-01

    The large space structures technology development missions to be performed on an early manned space station was studied and defined and the resources needed and the design implications to an early space station to carry out these large space structures technology development missions were determined. Emphasis is being placed on more detail in mission designs and space station resource requirements.

  5. Elisa technology consolidation study overview

    Science.gov (United States)

    Fitzsimons, E. D.; Brandt, N.; Johann, U.; Kemble, S.; Schulte, H.-R.; Weise, D.; Ziegler, T.

    2017-11-01

    The eLISA (evolved Laser Interferometer Space Antenna) mission is an ESA L3 concept mission intended to detect and characterise gravitational radiation emitted from astrophysical sources [1]. Current designs for eLISA [2] are based on the ESA study conducted in 2011 to reformulate the original ESA/NASA LISA concept [3] into an ESA-only L1 candidate named NGO (New Gravitational Observatory) [4]. During this brief reformulation period, a number of significant changes were made to the baseline LISA design in order to create a more costeffective mission. Some of the key changes implemented during this reformulation were: • A reduction in the inter satellite distance (the arm length) from 5 Gm to 1 Gm. • A reduction in the diameter of the telescope from 40 cm to 20 cm. • A reduction in the required laser power by approximately 40%. • Implementation of only 2 laser arms instead of 3. Many further simplifications were then enabled by these main design changes including the elimination of payload items in the two spacecraft (S/C) with no laser-link between them (the daughter S/C), a reduction in the size and complexity of the optical bench and the elimination of the Point Ahead Angle Mechanism (PAAM), which corrects for variations in the pointing direction to the far S/C caused by orbital dynamics [4] [5]. In the run-up to an L3 mission definition phase later in the decade, it is desirable to review these design choices and analyse the inter-dependencies and scaling between the key mission parameters with the goal of better understanding the parameter space and ensuring that in the final selection of the eLISA mission parameters the optimal balance between cost, complexity and science return can be achieved.

  6. Small transport aircraft technology propeller study

    Science.gov (United States)

    Black, B. M.; Magliozzi, B.; Rohrbach, C.

    1983-01-01

    A study to define potential benefits of advanced technology propeller for 1985-1990 STAT commuter airplanes was completed. Two baselines, a Convair, 30 passenger, 0.47 Mach number airplane and a Lockheed, 50 passenger, 0.70 Mach number airplane, were selected from NASA-Ames sponsored airframe contracts. Parametric performance, noise level, weight and cost trends for propellers with varying number of blades, activity factor, camber and diameter incorporating blade sweep, tip proplets, advanced composite materials, advanced airfoils, advanced prevision synchrophasing and counter-rotation are presented. The resulting DOC, fuel burned, empty weight and acquisition cost benefits are presented for resizings of the two baseline airplanes. Six-bladed propeller having advanced composite blades, advanced airfoils, tip proplets and advanced prevision synchrophasers provided the maximum DOC improvements for both airplanes. DOC and fuel burned were reduced by 8.3% and 17.0% respectively for the Convair airplane and by 24.9% and 41.2% respectively for the Lockheed airplane. The larger reductions arose from a baseline definition with very heavy fuselage acoustic treatment. An alternate baseline, with a cabin noise 13dB in excess of the objective, was also studied.

  7. [Immortal time bias in pharmacoepidemiological studies: definition, solutions and examples].

    Science.gov (United States)

    Faillie, Jean-Luc; Suissa, Samy

    2015-01-01

    Among the observational studies of drug effects in chronic diseases, many of them have found effects that were exaggerated or wrong. Among bias responsible for these errors, the immortal time bias, concerning the definition of exposure and exposure periods, is relevantly important as it usually tends to wrongly attribute a significant benefit to the study drug (or exaggerate a real benefit). In this article, we define the mechanism of immortal time bias, we present possible solutions and illustrate its consequences through examples of pharmacoepidemiological studies of drug effects. © 2014 Société Française de Pharmacologie et de Thérapeutique.

  8. Definition of common support equipment and space station interface requirements for IOC model technology experiments

    Science.gov (United States)

    Russell, Richard A.; Waiss, Richard D.

    1988-01-01

    A study was conducted to identify the common support equipment and Space Station interface requirements for the IOC (initial operating capabilities) model technology experiments. In particular, each principal investigator for the proposed model technology experiment was contacted and visited for technical understanding and support for the generation of the detailed technical backup data required for completion of this study. Based on the data generated, a strong case can be made for a dedicated technology experiment command and control work station consisting of a command keyboard, cathode ray tube, data processing and storage, and an alert/annunciator panel located in the pressurized laboratory.

  9. Indirect effects in community ecology: Their definition, study and importance.

    Science.gov (United States)

    Strauss, S Y

    1991-07-01

    The diversity of indirect interactions that can occur within communities is large. Recent research on indirect interactions is scattered in the literature under numerous labels. The definition of indirect effects is an important aspect of their study, and clarifies some of the subtle differences among indirect effects found in natural communities. Choosing which species to study, how to manipulate species and for what duration, which attributes to measure and, finally, which analytical techniques to use are all problems facing the community ecologist. Ultimately, we are striving for the best means of determining the relative importance of direct and indirect effects in structuring communities. Copyright © 1991. Published by Elsevier Ltd.

  10. Definition of technology development missions for early space station satellite servicing, volume 2

    Science.gov (United States)

    1983-01-01

    The results of all aspects of the early space station satellite servicing study tasks are presented. These results include identification of servicing tasks (and locations), identification of servicing mission system and detailed objectives, functional/operational requirements analyses of multiple servicing scenarios, assessment of critical servicing technology capabilities and development of an evolutionary capability plan, design and validation of selected servicing technology development missions (TDMs), identification of space station satellite servicing accommodation needs, and the cost and schedule implications of acquiring both required technology capability development and conducting the selected TDMs.

  11. Initial Technology Assessment for the Large UV-Optical-Infrared (LUVOIR) Mission Concept Study

    Science.gov (United States)

    Bolcar, Matthew R.; Feinberg, Lee D.; France, Kevin; Rauscher, Bernard J.; Redding, David; Schiminovich, David

    2016-01-01

    The NASA Astrophysics Divisions 30-Year Roadmap prioritized a future large-aperture space telescope operating in the ultra-violet-optical-infrared wavelength regime. The Association of Universities for Research in Astronomy envisioned a similar observatory, the High Definition Space Telescope. And a multi-institution group also studied the Advanced Technology Large Aperture Space Telescope. In all three cases, a broad science case is outlined, combining general astrophysics with the search for bio-signatures via direct-imaging and spectroscopic characterization of habitable exo-planets. We present an initial technology assessment that enables such an observatory that is currently being studied for the 2020 Decadal Survey by the Large UV-Optical Infrared (LUVOIR) surveyor Science and Technology Definition Team. We present here the technology prioritization for the 2016 technology cycle and define the required technology capabilities and current state-of-the-art performance. Current, planned, and recommended technology development efforts are also reported.

  12. Initial Technology Assessment for the Large-Aperture UV-Optical-Infrared (LUVOIR) Mission Concept Study

    Science.gov (United States)

    Bolcar, Matthew R.; Feinberg, Lee; France, Kevin; Rauscher, Bernard J.; Redding, David; Schiminovich, David

    2016-01-01

    The NASA Astrophysics Division's 30-Year Roadmap prioritized a future large-aperture space telescope operating in the ultra-violet/optical/infrared wavelength regime. The Association of Universities for Research in Astronomy envisioned a similar observatory, the High Definition Space Telescope. And a multi-institution group also studied the Advanced Technology Large Aperture Space Telescope. In all three cases, a broad science case is outlined, combining general astrophysics with the search for biosignatures via direct-imaging and spectroscopic characterization of habitable exoplanets. We present an initial technology assessment that enables such an observatory that is currently being studied for the 2020 Decadal Survey by the Large UV/Optical/Infrared (LUVOIR) surveyor Science and Technology Definition Team. We present here the technology prioritization for the 2016 technology cycle and define the required technology capabilities and current state-of-the-art performance. Current, planned, and recommended technology development efforts are also reported.

  13. Beyond the traditional definition of breakthrough pain: an observational study.

    Science.gov (United States)

    Gatti, Antonio; Gentili, Marta; Iorno, Vittorio; Mammucari, Massimo; Tufaro, Giuseppe; Lazzari, Marzia; Sabato, Alessandro Fabrizio

    2013-03-01

    Breakthrough pain (BTP) is traditionally defined as a transitory pain flare in opioid-treated patients with chronic background pain. This definition has, however, been challenged in recent years. This study aimed to analyze BTP prevalence in different pain conditions. This was a prospective, non-interventional, observational study conducted from June to September 2011 in two Italian pain treatment reference centres. Consecutive patients aged >18 years with oncological or non-oncological pain were eligible for this study; background pain was acute/ subacute (3 months). The characteristics of pain were evaluated by means of a structured interview by physicians, and patients were asked to complete a dedicated clinical study form. The following outcomes were assessed: chronic pain duration (in patients with chronic pain), BTP prevalence, and number and severity of daily BTP episodes. All outcomes were assessed in four populations of patients with: (a) chronic oncological pain; (b) chronic non-oncological pain; (c) non-chronic oncological pain; (d) non-chronic non-oncological pain. The correlation between BTP and gender was also investigated. Of 1,270 patients with chronic pain, 1,086 had non-oncological pain (85.5%). Most patients (68.6%) with non-oncological pain were female (P = 0.001). Pain duration was significantly longer in non-oncological pain versus oncological pain groups (P = 0.002). BTP prevalence was lower in non-oncological patients (P definition. BTP frequency and severity is similar in oncological and non-oncological pain.

  14. NASA Earth Science Mission Control Center Enterprise Emerging Technology Study Study (MCC Technology Study)

    Science.gov (United States)

    Smith, Dan; Horan, Stephen; Royer, Don; Sullivan, Don; Moe, Karen

    2015-01-01

    This paper reports on the results of the study to identify technologies that could have a significant impact on Earth Science mission operations when looking out at the 5-15 year horizon (through 2025). The potential benefits of the new technologies will be discussed, as well as recommendations for early research and development, prototyping, or analysis for these technologies.

  15. Healthy ageing in the Nun Study: definition and neuropathologic correlates.

    Science.gov (United States)

    Tyas, Suzanne L; Snowdon, David A; Desrosiers, Mark F; Riley, Kathryn P; Markesbery, William R

    2007-11-01

    Although the concept of healthy ageing has stimulated considerable interest, no generally accepted definition has been developed nor has its biological basis been determined. To develop a definition of healthy ageing and investigate its association with longevity and neuropathology. Analyses were based on cognitive, physical, and post-mortem assessments from 1991 to 1998 in the Nun Study, a longitudinal study of ageing in participants 75+ years at baseline. We defined three mutually exclusive levels of healthy ageing (excellent, very good, and good) based on measures of global cognitive function, short-term memory, basic and instrumental activities of daily living, and self-rated function. Mortality analyses were based on 636 participants; neuropathologic analyses were restricted to 221 who had died and were autopsied. Only 11% of those meeting criteria for the excellent level of healthy ageing at baseline subsequently died, compared with 24% for the very good, 39% for the good, and 60% for the remaining participants. Survival curves showed significantly greater longevity with higher levels of healthy ageing. The risk of not attaining healthy ageing, adjusted for age, increased two-fold in participants with brain infarcts alone, six-fold in those with Alzheimer neuropathology alone, and more than thirteen-fold in those with both brain infarcts and Alzheimer neuropathology. The biological validity of our definition of healthy ageing is supported by its strong association with mortality and longevity. Avoiding Alzheimer and stroke neuropathology is critical to the maintenance of healthy ageing, and the presence of both pathologies dramatically decreases the likelihood of healthy ageing.

  16. Conceptual Thermal Treatment Technologies Feasibility Study

    International Nuclear Information System (INIS)

    Suer, A.

    1996-01-01

    This report presents a conceptual Thermal Treatment Technologies Feasibility Study (FS) for the Savannah River Site (SRS) focusing exclusively on thermal treatment technologies for contaminated soil, sediment, or sludge remediation projects

  17. Combined mineralogical and EXAFS characterization of polluted sediments for the definition of technological variables and constraints

    Science.gov (United States)

    Brigatti, M. F.; Elmi, C.; Laurora, A.; Malferrari, D.; Medici, L.

    2009-04-01

    An extremely severe aspect, both from environmental and economic viewpoint, is the management of polluted sediments removed from drainage and irrigation canals. Canals, in order to retain their functionality over the time, need to have their beds, periodically cleaned from sediments there accumulating. The management of removed sediments is extremely demanding, also from an economical perspective, if these latter needs to be treated as dangerous waste materials, as stated in numerous international standards. Furthermore the disposal of such a large amount of material may introduce a significant environmental impact as well. An appealing alternative is the recovery or reuse of these materials, for example in brick and tile industry, after obviously the application of appropriate techniques and protocols that could render these latter no longer a threat for human health. The assessment of the effective potential danger for human health and ecosystem of sediments before and after treatment obviously requires both a careful chemical and mineralogical characterization and, even if not always considered in the international standards, the definition of the coordination shell of heavy metals dangerous for human health, as a function of their oxidation state and coordination (e.g. Cr and Pb), and introducing technological constraints or affecting the features of the end products. Fe is a good representative for this second category, as the features of the end product, such as color, strongly depend not only from Fe concentration but also from its oxidation state, speciation and coordination. This work will first of all provide mineralogical characterization of sediments from various sampling points of irrigation and drainage canals of Po river region in the north-eastern of Italy. Samples were investigated with various approaches including X-ray powder diffraction under non-ambient conditions, thermal analysis and EXAFS spectroscopy. Obtained results, and in particular

  18. Energy Efficient Engine program advanced turbofan nacelle definition study

    Science.gov (United States)

    Howe, David C.; Wynosky, T. A.

    1985-01-01

    Advanced, low drag, nacelle configurations were defined for some of the more promising propulsion systems identified in the earlier Benefit/Cost Study, to assess the benefits associated with these advanced technology nacelles and formulate programs for developing these nacelles and low volume thrust reversers/spoilers to a state of technology readiness in the early 1990's. The study results established the design feasibility of advanced technology, slim line nacelles applicable to advanced technology, high bypass ratio turbofan engines. Design feasibility was also established for two low volume thrust reverse/spoiler concepts that meet or exceed the required effectiveness for these engines. These nacelle and thrust reverse/spoiler designs were shown to be applicable in engines with takeoff thrust sizes ranging from 24,000 to 60,000 pounds. The reduced weight, drag, and cost of the advanced technology nacelle installations relative to current technology nacelles offer a mission fuel burn savings ranging from 3.0 to 4.5 percent and direct operating cost plus interest improvements from 1.6 to 2.2 percent.

  19. Definition study for variable cycle engine testbed engine and associated test program

    Science.gov (United States)

    Vdoviak, J. W.

    1978-01-01

    The product/study double bypass variable cycle engine (VCE) was updated to incorporate recent improvements. The effect of these improvements on mission range and noise levels was determined. This engine design was then compared with current existing high-technology core engines in order to define a subscale testbed configuration that simulated many of the critical technology features of the product/study VCE. Detailed preliminary program plans were then developed for the design, fabrication, and static test of the selected testbed engine configuration. These plans included estimated costs and schedules for the detail design, fabrication and test of the testbed engine and the definition of a test program, test plan, schedule, instrumentation, and test stand requirements.

  20. The technology vicinity: a location based view on technology

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.; Kocaoglu, D.F.; Anderson, T.R.

    2001-01-01

    The issue of technology transfer has been viewed from many different perspectives. In this case the focus is on the process of (production) technology transfer. One of the difficulties in studying international technology transfer is the definition of technology. The many technology definitions that

  1. The Factors Affecting Definition of Research Problems in Educational Technology Researches

    Science.gov (United States)

    Bahçekapili, Ekrem; Bahçekapili, Tugba; Fis Erümit, Semra; Göktas, Yüksel; Sözbilir, Mustafa

    2013-01-01

    Research problems in a scientific research are formed after a certain process. This process starts with defining a research topic and transforms into a specific research problem or hypothesis. The aim of this study was to examine the way educational technology researchers identify their research problems. To this end, sources that educational…

  2. Technology geography: studying the relationships between technology, location and productivity

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2006-01-01

    Operations management, international management, public policy and economic geography are scientific areas which come together in the study of international technology transfer. This study shows how each of these areas has its own central issues but also has specific parts that are relevant for

  3. Evaluating the offensive definition zone in football: a case study ...

    African Journals Online (AJOL)

    New technological solutions have greatly improved match analysis systems for investigating players' performance. Nevertheless, there still remains a large gap in the collective analysis where improvements need to be made, mainly in the use of automated information gathering. Thus, the aim of this case study was to ...

  4. Technological innovation in neurosurgery: a quantitative study.

    Science.gov (United States)

    Marcus, Hani J; Hughes-Hallett, Archie; Kwasnicki, Richard M; Darzi, Ara; Yang, Guang-Zhong; Nandi, Dipankar

    2015-07-01

    Technological innovation within health care may be defined as the introduction of a new technology that initiates a change in clinical practice. Neurosurgery is a particularly technology-intensive surgical discipline, and new technologies have preceded many of the major advances in operative neurosurgical techniques. The aim of the present study was to quantitatively evaluate technological innovation in neurosurgery using patents and peer-reviewed publications as metrics of technology development and clinical translation, respectively. The authors searched a patent database for articles published between 1960 and 2010 using the Boolean search term "neurosurgeon OR neurosurgical OR neurosurgery." The top 50 performing patent codes were then grouped into technology clusters. Patent and publication growth curves were then generated for these technology clusters. A top-performing technology cluster was then selected as an exemplar for a more detailed analysis of individual patents. In all, 11,672 patents and 208,203 publications related to neurosurgery were identified. The top-performing technology clusters during these 50 years were image-guidance devices, clinical neurophysiology devices, neuromodulation devices, operating microscopes, and endoscopes. In relation to image-guidance and neuromodulation devices, the authors found a highly correlated rapid rise in the numbers of patents and publications, which suggests that these are areas of technology expansion. An in-depth analysis of neuromodulation-device patents revealed that the majority of well-performing patents were related to deep brain stimulation. Patent and publication data may be used to quantitatively evaluate technological innovation in neurosurgery.

  5. Case studies can support definitions of workplace innovation in practice

    NARCIS (Netherlands)

    Vaas, F.; Žiauberytė-Jakštienė, R.; Oeij, P.R.

    2017-01-01

    Many practitioners find it problematic to understand and describe workplace innovation (WPI). Whereas there are well-known definitions of WPI, these remain highly abstract. We argue that, for practitioners, case examples of WPI best practices can be a valuable addition to these definitions. In this

  6. A study on the nuclear technology policy

    International Nuclear Information System (INIS)

    Kim, H. J.; Oh, K. B.; Chung, W. S.; Lee, T. J.; Yun, S. W.; Jeong, Ik

    2005-01-01

    This study was conducted as a part of institutional activities of KAERI, and the objective of the study is to survey and analyze the change of international environment in nuclear use and research and development environment, and to propose systematic alternatives on technology policy for efficiency and effectiveness of research and development through national R and D program while timely responding to the environmental change in local and global sense. Acknowledging the importance of the relationship between the external environment and the national nuclear R and D strategic planning for changing of environment of surrounding nuclear technology and development in the world, this study focused on the three major subjects: (1) investigation and analysis of international nuclear environmental and technological change; (2) developing nuclear R and D strategy based on the analysis of national and global environment surrounding nuclear technology development and diffusion; (3) the evaluation of role of nuclear technology and environment from the point of views of environmental effects. In order to enhance the role of national nuclear R and D program and to cope with the environmental and technological change surrounding nuclear energy, it is recommended that active participation should be done in ongoing international collaboration on future innovative nuclear technology for absorption of advanced technologies and strategic R and D planning should be centered on core technology field based on long-term vision and suggested NuTRM considering future energy-environmental surroundings for maximized use of domestic technology capabilities and resources

  7. GIS approach to the definition of capacity and generation ceilings of renewable energy technologies

    International Nuclear Information System (INIS)

    Dominguez Bravo, Javier; Garcia Casals, Xavier; Pinedo Pascua, Irene

    2007-01-01

    There are no discrepancies about the advantages of achieving a sustainable energy system based on locally available natural resources. However, supporters of green energy generation system were lacking some scientific and consistent study to defend their proposals. In order to have such a study, Greenpeace commissioned Technology Research Institute at the Pontificia Comillas University to carry out a study to assess ceilings for the potential and generation of renewable technologies in Spain. It demonstrates firstly a far greater renewable potential than the targets set by long term policies, and secondly, the viability of meeting the entire electricity demand projected for 2050. GIS was used to add the geographical dimension to the original project in order to generate a technical analysis linked to the specific constrictions imposed by territory (natural and anthropogenic) and not just designed to cover a certain demand. Therefore, GIS spatial analysis took into account local conditions producing a more accurate assessment than evaluations made upon 'virtual' electrical spaces. This approach could be applied to other small scale general studies in order to assess the maximum contribution of renewable energy sources to particular energy generation mix and to help set development policies supporting high participation of renewable technologies

  8. A Study on the Nuclear Technology Policy

    International Nuclear Information System (INIS)

    Oh, K. B.; Lee, K. S.; Chung, W. S.; Lee, T. J.; Yun, S. W.; Jeong, I.; Lee, J. H.

    2007-02-01

    The objective of the study was to make policy-proposals for enhancing the effectiveness and efficiency of national nuclear technology R and D programs. To do this, environmental changes of international nuclear energy policy and trends of nuclear technology development were surveyed and analyzed. This Study analyzed trends of nuclear technology policies and developed the nuclear energy R and D innovation strategy in a viewpoint of analyzing the changes in the global policy environment associated with nuclear technology development and development of national nuclear R and D strategy

  9. Definition of Storage Complex for the Technological Development Plant and the Evaluation Scenarios

    International Nuclear Information System (INIS)

    Recreo, F.; Hurtado, A.; Eguilior, S.

    2015-01-01

    This report intends a geological description of the site for the Technological Development Plant that CIUDEN is conducting in Hontomín (Burgos) for the improvement, both technological and economic, of the key aspects of geological storage of CO2 in deep permeable formations. Safety studies of this site began in 2008 with a preliminary appraisal of several pre-selected areas in the western part of the so-called "Cantabrian Basin". However, the modelling of the processes acting in the permanent sequestration of CO2 requires a much more detailed knowledge of the geological formations that form the complex storage and of its lithologic, petrophysical, hydrogeological, geochemical and geomechanical characteristics. This report presents a summary of the geological and hydrogeological information available from the documentation provided by the Geological Survey of Spain (IGME) and the published studies conducted in the area for oil research campaigns between 1965-68 and 1991–96. This information has allowed to deriving a preliminary conceptualization of what would be the system model of the geological system where the Technological Development Plant will be installed as well as identifying the remaining uncertainties.

  10. Technological advances for studying human behavior

    Science.gov (United States)

    Roske-Hofstrand, Renate J.

    1990-01-01

    Technological advances for studying human behavior are noted in viewgraph form. It is asserted that performance-aiding systems are proliferating without a fundamental understanding of how they would interact with the humans who must control them. Two views of automation research, the hardware view and the human-centered view, are listed. Other viewgraphs give information on vital elements for human-centered research, a continuum of the research process, available technologies, new technologies for persistent problems, a sample research infrastructure, the need for metrics, and examples of data-link technology.

  11. Communication Technology Use and Study Skills

    Science.gov (United States)

    Thompson, Penny

    2017-01-01

    Research suggests a negative relationship between frequent use of communication technologies, such as text messaging and social network sites, and academic performance, but the nature of the relationship needs to be explored in greater detail. This study explored the relationship between use of communication technologies and self-reported study…

  12. Objectives and Model Payload Definition for NEO Human Mission Studies

    Science.gov (United States)

    Carnelli, I.; Galvez, A.; Carpenter, J.

    2011-10-01

    ESA has supported studies on NEO threat assessment systems and deflection concepts in the context of the General Studies Programme and in close cooperation with the directorates of Technical and Quality Management and of the Scientific Programme. This work has made it possible to identify a project for Europe to make a significant - yet realistic - contribution to the international efforts in this field: the Don Quijote NEO technology demonstration mission. This paper describes what such a small mission can do to prepare future human exploration and what is the in-situ data that can be obtained through such a project.

  13. Definition study of a Variable Cycle Experimental Engine (VCEE) and associated test program and test plan

    Science.gov (United States)

    Allan, R. D.

    1978-01-01

    The Definition Study of a Variable Cycle Experimental Engine (VCEE) and Associated Test Program and Test Plan, was initiated to identify the most cost effective program for a follow-on to the AST Test Bed Program. The VCEE Study defined various subscale VCE's based on different available core engine components, and a full scale VCEE utilizing current technology. The cycles were selected, preliminary design accomplished and program plans and engineering costs developed for several program options. In addition to the VCEE program plans and options, a limited effort was applied to identifying programs that could logically be accomplished on the AST Test Bed Program VCE to extend the usefulness of this test hardware. Component programs were provided that could be accomplished prior to the start of a VCEE program.

  14. Survey Definitions of Gout for Epidemiologic Studies: Comparison With Crystal Identification as the Gold Standard

    NARCIS (Netherlands)

    Dalbeth, N.; Schumacher, H.R.; Fransen, J.; Neogi, T.; Jansen, T.L; Brown, M.; Louthrenoo, W.; Vazquez-Mellado, J.; Eliseev, M.; McCarthy, G.; Stamp, L.K.; Perez-Ruiz, F.; Sivera, F.; Ea, H.K.; Gerritsen, M.; Scire, C.A.; Cavagna, L.; Lin, C.; Chou, Y.Y.; Tausche, A.K.; Rocha Castelar-Pinheiro, G. da; Janssen, M; Chen, J.H.; Cimmino, M.A.; Uhlig, T.; Taylor, W.J.

    2016-01-01

    OBJECTIVE: To identify the best-performing survey definition of gout from items commonly available in epidemiologic studies. METHODS: Survey definitions of gout were identified from 34 epidemiologic studies contributing to the Global Urate Genetics Consortium (GUGC) genome-wide association study.

  15. The technology vicinity: a location based view on technology

    OpenAIRE

    Steenhuis, H.J.; de Bruijn, E.J.; Kocaoglu, D.F.; Anderson, T.R.

    2001-01-01

    The issue of technology transfer has been viewed from many different perspectives. In this case the focus is on the process of (production) technology transfer. One of the difficulties in studying international technology transfer is the definition of technology. The many technology definitions that exist are either too ‘loosely’ formulated or they require thorough expert knowledge. This results in difficulties with measuring technology and comparing different studies meaningfully. This study...

  16. National Biomedical Tracer Facility (NBTF). Project definition study: Phase I

    Energy Technology Data Exchange (ETDEWEB)

    Lagunas-Solar, M.C.

    1995-02-15

    This report describes a five-year plan for the construction and commissioning of a reliable and versatile NBTF facility for the production of high-quality, high-yield radioisotopes for research, biomedical, and industrial applications. The report is organized in nine sections providing, in consecutive order, responses to the nine questions posed by the U.S. Department of Energy in its solicitation for the NBTF Project Definition Study. In order to preserve direct correspondence (e.g., Sec. 3 = 3rd item), this Introduction is numbered {open_quotes}0.{close_quotes} Accelerator and facility designs are covered in Section 1 (Accelerator Design) and Section 2 (Facility Design). Preliminary estimates of capital costs are detailed in Section 3 (Design and Construction Costs). Full licensing requirements, including federal, state, and local ordinances, are discussed in Section 4 (Permits). A plan for the management of hazardous materials to be generated by NBTF is presented in Section 5 (Waste Management). An evaluation of NBTF`s economic viability and its potential market impact is detailed in Section 6(Business Plan), and is complemented by the plans in Section 7 (Operating Plan) and Section 8 (Radioisotope Plan). Finally, a plan for NBTF`s research, education, and outreach programs is presented in Section 9 (Research and Education Programs).

  17. Terms and definitions in the field of radiological technology. Begriffe und Benennungen in der radiologischen Technik

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    The radiation field condition ''secondary electron equilibrium'' as part of the definition for the standard ion dose is specified. The term ''free in air'' gets - contrary to DIN 6814, sec. 3, June 1972 issue - its original meaning, i.e. the definition of measuring conditions eliminating avoidable scatter. For measuring the standard ion dose, dose meters are calibrated ''free in air''. The quantity ''Standard ion dose'' can be measured in any material. The quantitative ratios between standard ion dose and the quantities ''exposure'' and ''air kerma'' as per ICRU report 33 ''Quantities and Units'' (1980) are described. The SI-units Gray, Sievert and Becquerel are introduced. For the quantities ''core dose rate'' ''dose rate constant'' and ''aereal dose product'' new definitions are given, according to the ICRU report 33, using the terms ''absorbed dose'' and ''kerma''.

  18. Small Transport Aircraft Technology /STAT/ Propulsion Study

    Science.gov (United States)

    Heldenbrand, R. W.; Baerst, C. F.; Rowse, J. H.

    1980-01-01

    The NASA Small Transport Aircraft Technology (STAT) Propulsion Study was established to identify technology requirements and define the research and development required for new commuter aircraft. Interim results of the studies defined mission and design characteristics for 30- and 50-passenger aircraft. Sensitivities were defined that relate changes in engine specific fuel consumption (SFC), weight, and cost (including maintenance) to changes in the aircraft direct operating cost (DOC), takeoff gross weight, and empty weight. A comparison of performance and economic characteristics is presented between aircraft powered by 1980 production engines and those powered by a 1990 advanced technology baseline engine.

  19. Study on LOMI decontamination technology

    International Nuclear Information System (INIS)

    Huang Fuduan; Yu Degui; Lu Jingju; Xie Yinyan

    1993-10-01

    The results of decontamination technique of Low-Oxidation-State Metal-Ion (LOMI) reagents developed from 1986 to 1991 in the laboratory are introduced. The experiments included preparation of LOMI reagents, de-filming efficiency, corrosion behavior of typical alloys, decontamination factors of reagents for contaminated materials and components have proved that the NP/LOMI decontamination method and treatment technique of waste water are feasible and have some advantages. The preparation of LOMI reagent with low concentration of formic acid by reduced pressure distilling technique and the utilization ratio of vanadium reached to 95% by second electrolysis are the main contributions of the study to the decontamination technique

  20. A Discussion of Oxygen Recovery Definitions and Key Performance Parameters for Closed-Loop Atmosphere Revitalization Life Support Technology Development

    Science.gov (United States)

    Abney, Morgan B.; Perry, Jay L.

    2016-01-01

    Over the last 55 years, NASA has evolved life support for crewed space exploration vehicles from simple resupply during Project Mercury to the complex and highly integrated system of systems aboard the International Space Station. As NASA targets exploration destinations farther from low Earth orbit and mission durations of 500 to 1000 days, life support systems must evolve to meet new requirements. In addition to having more robust, reliable, and maintainable hardware, limiting resupply becomes critical for managing mission logistics and cost. Supplying a crew with the basics of food, water, and oxygen become more challenging as the destination ventures further from Earth. Aboard ISS the Atmosphere Revitalization Subsystem (ARS) supplies the crew's oxygen demand by electrolyzing water. This approach makes water a primary logistics commodity that must be managed carefully. Chemical reduction of metabolic carbon dioxide (CO2) provides a method of recycling oxygen thereby reducing the net ARS water demand and therefore minimizing logistics needs. Multiple methods have been proposed to achieve this recovery and have been reported in the literature. However, depending on the architecture and the technology approach, "oxygen recovery" can be defined in various ways. This discontinuity makes it difficult to compare technologies directly. In an effort to clarify community discussions of Oxygen Recovery, we propose specific definitions and describe the methodology used to arrive at those definitions. Additionally, we discuss key performance parameters for Oxygen Recovery technology development including challenges with comparisons to state-of-the-art.

  1. Mapping Translation Technology Research in Translation Studies

    DEFF Research Database (Denmark)

    Schjoldager, Anne; Christensen, Tina Paulsen; Flanagan, Marian

    2017-01-01

    section aims to improve this situation by presenting new and innovative research papers that reflect on recent technological advances and their impact on the translation profession and translators from a diversity of perspectives and using a variety of methods. In Section 2, we present translation......Due to the growing uptake of translation technology in the language industry and its documented impact on the translation profession, translation students and scholars need in-depth and empirically founded knowledge of the nature and influences of translation technology (e.g. Christensen....../Schjoldager 2010, 2011; Christensen 2011). Unfortunately, the increasing professional use of translation technology has not been mirrored within translation studies (TS) by a similar increase in research projects on translation technology (Munday 2009: 15; O’Hagan 2013; Doherty 2016: 952). The current thematic...

  2. Definition of technology development missions for early space station, orbit transfer vehicle servicing, volume 2

    Science.gov (United States)

    1983-01-01

    Propellant transfer, storage, and reliquefaction TDM; docking and berthing technology development mission; maintenance technology development mission; OTV/payload integration, space station interface/accommodations; combined TDM conceptual design; programmatic analysis; and TDM equipment usage are discussed.

  3. Generation of human hepatocytes by stem cell technology: definition of the hepatocyte.

    Science.gov (United States)

    Hengstler, Jan G; Brulport, Marc; Schormann, Wiebke; Bauer, Alexander; Hermes, Matthias; Nussler, Andreas K; Fandrich, Fred; Ruhnke, Maren; Ungefroren, Hendrik; Griffin, Louise; Bockamp, Ernesto; Oesch, Franz; von Mach, Marc-Alexander

    2005-06-01

    Since 1999, numerous articles have reported the generation of hepatocytes from different types of extrahepatic stem or precursor cells. This opens exciting new possibilities for pharmacology and toxicology, as well as for cell therapy. Hepatocyte marker expression, including albumin, cytokeratin 18, c-met, alpha-fetoprotein and cytochrome P450 3A4 and -2B6, has been observed after transplantation of different types of human stem cells into the liver of laboratory animals or in vitro after incubation with cytokines. These intriguing observations have prompted scientists to classify stem cell-derived cell populations as hepatocytes. However, this conclusion may be premature. It has been shown that factors of the liver microenvironment can induce expression of a limited number of hepatocyte marker genes in nonhepatic cell types. To conclude on the grounds of a limited number of markers that these cells are true hepatocytes is not indicated. In this case one should carefully evaluate crucial hepatocyte-defining enzymatic properties. The present article: i) reviews studies describing the fate of extrahepatic human stem and precursor cells in livers of laboratory animals, including the possibility of cell fusion; and ii) critically discusses the phenotype of stem cells after application of various differentiation protocols aimed at generating human hepatocytes. In addition, the necessary criteria needed for defining a true hepatocyte are suggested. Establishing the necessary properties for stem cell-derived hepatocytes is timely and reasonable, and thus avoids further misleading semantic confusion. Finally, it is essential to understand that the definition of a bona fide hepatocyte should not be limited to qualitative assays, such as reverse transcriptase polymerase chain reaction and immunohistochemistry, but has to include a quantitative analysis of enzymatic activities, which allows direct comparison with primary hepatocytes. Although the stem cell

  4. Analysis of agreement among definitions of metabolic syndrome in nondiabetic Turkish adults: a methodological study

    Directory of Open Access Journals (Sweden)

    Bersot Thomas P

    2007-12-01

    Full Text Available Abstract Background We aimed to explore the agreement among World Health Organization (WHO, European Group for the Study of Insulin Resistance (EGIR, National Cholesterol Education Program (NCEP, American College of Endocrinology (ACE, and International Diabetes Federation (IDF definitions of the metabolic syndrome. Methods 1568 subjects (532 men, 1036 women, mean age 45 and standard deviation (SD 13 years were evaluated in this cross-sectional, methodological study. Cardiometabolic risk factors were determined. Insulin sensitivity was calculated by HOMA-IR. Agreement among definitions was determined by the kappa statistic. ANOVA and post hoc Tukey's test were used to compare multiple groups. Results The agreement between WHO and EGIR definitions was very good (kappa: 0.83. The agreement between NCEP, ACE, and IDF definitions was substantial to very good (kappa: 0.77–0.84. The agreement between NCEP or ACE or IDF and WHO or EGIR definitions was fair (kappa: 0.32–0.37. The age and sex adjusted prevalence of metabolic syndrome was 38% by NCEP, 42% by ACE and IDF, 20% by EGIR and 19% by WHO definition. The evaluated definitions were dichotomized after analysis of design, agreement and prevalence: insulin measurement requiring definitions (WHO and EGIR and definitions not requiring insulin measurement (NCEP, ACE, IDF. One definition was selected from each set for comparison. WHO-defined subjects were more insulin resistant than subjects without the metabolic syndrome (mean and SD for log HOMA-IR, 0.53 ± 0.14 vs. 0.07 ± 0.23, respectively, p 0.05, but lower log HOMA-IR values (p Conclusion The metabolic syndrome definitions that do not require measurement of insulin levels (NCEP, ACE and IDF identify twice more patients with insulin resistance and increased Framingham risk scores and are more useful than the definitions that require measurement of insulin levels (WHO and EGIR.

  5. A Study on the Nuclear Technology Policy

    International Nuclear Information System (INIS)

    Lim, C. Y.; Lee, K. S.; Jeong, I.; Lee, J. H.

    2009-04-01

    The objective of the study was to make policy-proposes for enhancing the effectiveness and efficiency of national nuclear technology development programs. To do this, recent changes of international nuclear energy policy and trends of nuclear technology R and D was surveyed and analyzed. In the viewpoint of analysis of the changes in the global policy surrounding nuclear technology development and development of national nuclear R and D strategy, this study (1) analyzed the trends of nuclear technology policies and (2) discussed the mid and long term strategy of nuclear energy R and D. To put it in more detail, each subject was further explored as follows; (1) analyzed the trends of nuclear technology policies - Trend and prospects of the international and domestic nuclear policies - Investigation of development of small and medium sized policies - International collaboration for advanced nuclear technologies (2) discussed the mid and long term strategy of nuclear energy R and D - The long term development plan for future nuclear energy system - The facilitation of technology commercialization

  6. A Study on Nuclear Technology Policy

    International Nuclear Information System (INIS)

    Oh, K. B.; Chung, W. S.; Lee, T. J.; Yun, S. W.; Jeong, Ik; Lee, J. H.

    2006-02-01

    This study was conducted as a part of institutional activities of KAERI, and the objective of the study is to survey and analyze the change of international environment in nuclear use and research and development environment, and to propose systematic alternatives on technology policy for efficiency and effectiveness of research and development through national R and D program while timely responding to the environmental change in local and global sense. In the investigation and analysis of international environmental and technological change 1. Viability of Nuclear Renaissance 2. Recent of Nuclear Technology Policy in Japan 3. Collaboration for Advanced Nuclear Technologies in GIF, INPRO and INERI 4. Nuclear Energy Utilization and Development in Europe. In the evaluation of nuclear technology and sustainable development from the point of views of environmental change 5. External Cost of Environmental Impact in Electric Power Sector 6. Nuclear Technology Development Direction Considering Changes of the Science and Technology Policy Environment 7. Nuclear Energy Development Strategy for a Sustainable National Energy Supply

  7. A Study on Nuclear Technology Policy

    Energy Technology Data Exchange (ETDEWEB)

    Oh, K B; Chung, W S; Lee, T J; Yun, S W; Jeong, Ik; Lee, J H

    2006-02-15

    This study was conducted as a part of institutional activities of KAERI, and the objective of the study is to survey and analyze the change of international environment in nuclear use and research and development environment, and to propose systematic alternatives on technology policy for efficiency and effectiveness of research and development through national R and D program while timely responding to the environmental change in local and global sense. In the investigation and analysis of international environmental and technological change 1. Viability of Nuclear Renaissance 2. Recent of Nuclear Technology Policy in Japan 3. Collaboration for Advanced Nuclear Technologies in GIF, INPRO and INERI 4. Nuclear Energy Utilization and Development in Europe. In the evaluation of nuclear technology and sustainable development from the point of views of environmental change 5. External Cost of Environmental Impact in Electric Power Sector 6. Nuclear Technology Development Direction Considering Changes of the Science and Technology Policy Environment 7. Nuclear Energy Development Strategy for a Sustainable National Energy Supply.

  8. Creating Educational Technology Curricula for Advanced Studies in Learning Technology

    Directory of Open Access Journals (Sweden)

    Minoru Nakayama

    2016-08-01

    Full Text Available Curriculum design and content are key factors in the area of human resource development. To examine the possibility of using a collaboration of Human Computer Interaction (HCI and Educational Technology (ET to develop innovative improvements to the education system, the curricula of these two areas of study were lexically analyzed and compared. As a further example, the curriculum of a joint course in HCI and ET was also lexically analyzed and the contents were examined. These analyses can be used as references in the development of human resources for use in advanced learning environments.

  9. Definition and compositions of standard wastestreams for evaluation of Buried Waste Integrated Demonstration treatment technologies

    International Nuclear Information System (INIS)

    Bates, S.O.

    1993-06-01

    The Buried Waste Integrated Demonstration (BWID) Project was organized at the Idaho National Engineering Laboratory to support research, development, demonstration, testing, and evaluation of emerging technologies that offer promising solutions to remediation of buried waste. BWID will identify emerging technologies, screen them for applicability to the identified needs, select technologies for demonstration, and then evaluate the technologies based on prescribed performance objectives. The technical objective of the project is to establish solutions to Environmental Restoration and Waste Management's technological deficiencies and improve baseline remediation systems. This report establishes a set of standard wastestream compositions that will be used by BWID to evaluate the emerging technologies. Five wastestreams are proposed that use four types of waste and a nominal case that is a homogenized combination of the four wastes. The five wastestreams will provide data on the compositional extremes and indicate the technologies' effectiveness over the complete range of expected wastestream compositions

  10. Tokamak Engineering Technology Facility scoping study

    Energy Technology Data Exchange (ETDEWEB)

    Stacey, W.M. Jr.; Abdou, M.A.; Bolta, C.C.

    1976-03-01

    A scoping study for a Tokamak Engineering Technology Facility (TETF) is presented. The TETF is a tokamak with R = 3 m and I/sub p/ = 1.4 MA based on the counterstreaming-ion torus mode of operation. The primary purpose of TETF is to demonstrate fusion technologies for the Experimental Power Reactor (EPR), but it will also serve as an engineering and radiation test facility. TETF has several technological systems (e.g., superconducting toroidal-field coil, tritium fuel cycle, impurity control, first wall) that are prototypical of EPR.

  11. Tokamak Engineering Technology Facility scoping study

    International Nuclear Information System (INIS)

    Stacey, W.M. Jr.; Abdou, M.A.; Bolta, C.C.

    1976-03-01

    A scoping study for a Tokamak Engineering Technology Facility (TETF) is presented. The TETF is a tokamak with R = 3 m and I/sub p/ = 1.4 MA based on the counterstreaming-ion torus mode of operation. The primary purpose of TETF is to demonstrate fusion technologies for the Experimental Power Reactor (EPR), but it will also serve as an engineering and radiation test facility. TETF has several technological systems (e.g., superconducting toroidal-field coil, tritium fuel cycle, impurity control, first wall) that are prototypical of EPR

  12. Mapping Translation Technology Research in Translation Studies

    DEFF Research Database (Denmark)

    Schjoldager, Anne; Christensen, Tina Paulsen; Flanagan, Marian

    2017-01-01

    /Schjoldager 2010, 2011; Christensen 2011). Unfortunately, the increasing professional use of translation technology has not been mirrored within translation studies (TS) by a similar increase in research projects on translation technology (Munday 2009: 15; O’Hagan 2013; Doherty 2016: 952). The current thematic...... section aims to improve this situation by presenting new and innovative research papers that reflect on recent technological advances and their impact on the translation profession and translators from a diversity of perspectives and using a variety of methods. In Section 2, we present translation...... technology research as a subdiscipline of TS, and we define and discuss some basic concepts and models of the field that we use in the rest of the paper. Based on a small-scale study of papers published in TS journals between 2006 and 2016, Section 3 attempts to map relevant developments of translation...

  13. Communication technologies in the study environment

    DEFF Research Database (Denmark)

    Thorhauge, Anne Mette

    2012-01-01

    will argue that the ways in which these technologies are used reflects two different perspectives on the interplay between communication technology and organisational structure: organisational structure as an anticipation of communication patterns implied in course management system’s design......In this article, I will analyse and discuss two qualitative case studies concerning ICT in the study environment at the University of Copenhagen, Denmark. I will place special focus on the way in which organisational perspectives as well as technological affordances shape how communication...... technologies are integrated into organisational structures and practices on campus. This involves a comparison between course management systems on the one hand and students’ personal media (mobile phones, e-mails) on the other hand, with regard to how these are used on campus. On the basis of this analysis, I...

  14. Zero-gravity cloud physics laboratory: Experiment program definition and preliminary laboratory concept studies

    Science.gov (United States)

    Eaton, L. R.; Greco, E. V.

    1973-01-01

    The experiment program definition and preliminary laboratory concept studies on the zero G cloud physics laboratory are reported. This program involves the definition and development of an atmospheric cloud physics laboratory and the selection and delineations of a set of candidate experiments that must utilize the unique environment of zero gravity or near zero gravity.

  15. Definitions of Physical Concepts: A Study of Physics Teachers' Knowledge and Views. Research Report

    Science.gov (United States)

    Galili, Igal; Lehavi, Yaron

    2006-01-01

    A study was made of the ability of a population of high-school physics teachers to define physics concepts and of their views regarding the importance of such definitions. It was found possible to arrange the definitions accumulated in categories, and the classification so obtained was consonant with that of the philosophy of science. Although the…

  16. Comparing definitions in guidelines and written standards - a case study: 'Trueness'

    International Nuclear Information System (INIS)

    Pavese, F

    2010-01-01

    This paper describes the structure of a repository initiated by IMEKO TC21 to allow the comparison of different definitions and use of the same term or concept in written standards and guidelines available internationally. The method used is illustrated for a case study: the critical concept of 'trueness' and its definitions.

  17. Big Data Analytics as Input for Problem Definition and Idea Generation in Technological Design

    OpenAIRE

    Escandón-Quintanilla , Ma-Lorena; Gardoni , Mickaël; Cohendet , Patrick

    2016-01-01

    Part 10: Big Data Analytics and Business Intelligence; International audience; Big data analytics enables organizations to process massive amounts of data in shorter amounts of time and with more understanding than ever before. Many uses have been found to take advantage of this tools and techniques, especially for decision making. However, little applications have been found in the first stages of innovation, namely problem definition and idea generation. This paper discusses how big data an...

  18. The handbook of science and technology studies

    CERN Document Server

    Fouché, Rayvon; Miller, Clark A; Smith-Doerr, Laurel

    2017-01-01

    Science and Technology Studies (STS) is a flourishing interdisciplinary field that examines the transformative power of science and technology to arrange and rearrange contemporary societies. The Handbook of Science and Technology Studies provides a comprehensive and authoritative overview of the field, reviewing current research and major theoretical and methodological approaches in a way that is accessible to both new and established scholars from a range of disciplines. This new edition, sponsored by the Society for Social Studies of Science, is the fourth in a series of volumes that have defined the field of STS. It features 36 chapters, each written for the fourth edition, that capture the state of the art in a rich and rapidly growing field. One especially notable development is the increasing integration of feminist, gender, and postcolonial studies into the body of STS knowledge. The book covers methods and participatory practices in STS research; mechanisms by which knowledge, people, and societies ...

  19. A Study on the Nuclear Technology Policy

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H. J.; Lim, C. Y.; Yang, M. H. (and others)

    2008-03-15

    The objective of the study was to make policy-proposes for enhancing the effectiveness and efficiency of national nuclear technology development programs. To do this, changes of international nuclear energy policy environment and trends of nuclear technology development was surveyed and analyzed. In the viewpoint of analysis of the changes in the global policy environment surrounding nuclear technology development and development of national nuclear R and D strategy, this study (1) analyzed trends of nuclear technology policies and (2) developed the nuclear energy R and D innovation strategies. To put it in more detail, each subject was further explored as follows; (1) themes to analyze trends of nuclear policies: nuclear Renaissance and forecast for nuclear power plant, International collaboration for advanced nuclear technologies in GIF, INPRO and I-NERI, The present situation and outlook for world uranium market (2) themes to develop of nuclear energy R and D innovation strategies: The mid-term strategy plan of the KAERI, The technological innovation case of the KAERI.

  20. A Study on the Nuclear Technology Policy

    International Nuclear Information System (INIS)

    Kim, H. J.; Lim, C. Y.; Yang, M. H.

    2008-03-01

    The objective of the study was to make policy-proposes for enhancing the effectiveness and efficiency of national nuclear technology development programs. To do this, changes of international nuclear energy policy environment and trends of nuclear technology development was surveyed and analyzed. In the viewpoint of analysis of the changes in the global policy environment surrounding nuclear technology development and development of national nuclear R and D strategy, this study (1) analyzed trends of nuclear technology policies and (2) developed the nuclear energy R and D innovation strategies. To put it in more detail, each subject was further explored as follows; (1) themes to analyze trends of nuclear policies: nuclear Renaissance and forecast for nuclear power plant, International collaboration for advanced nuclear technologies in GIF, INPRO and I-NERI, The present situation and outlook for world uranium market (2) themes to develop of nuclear energy R and D innovation strategies: The mid-term strategy plan of the KAERI, The technological innovation case of the KAERI

  1. Does the Reliability of Reporting in Injury Surveillance Studies Depend on Injury Definition?

    Science.gov (United States)

    Cross, Matthew; Williams, Sean; Kemp, Simon P.T.; Fuller, Colin; Taylor, Aileen; Brooks, John; Trewartha, Grant; Stokes, Keith

    2018-01-01

    Background: Choosing an appropriate definition for injury in injury surveillance studies is essential to ensure a balance among reporting reliability, providing an accurate representation of injury risk, and describing the nature of the clinical demand. Purpose: To provide guidance on the choice of injury definition for injury surveillance studies by comparing within- and between-team variability in injury incidence with >24-hour and >7-day time-loss injury definitions in a large multiteam injury surveillance study. Study Design: Cohort study (diagnosis); Level of evidence, 2. Methods: Injury data were reported for 2248 professional rugby union players from 15 Premiership Rugby clubs over 12 seasons. Within-team percentage coefficient of variation and mean between-team standard deviation (expressed as a percentage coefficient of variation) in injury incidence rates (injuries per 1000 player match hours) were calculated. For both variables, a comparison was made between >24-hour and >7-day injury incidence rates in terms of the magnitude of the observed effects. Results: The overall mean incidence across the population with a >24-hour time-loss injury definition was approximately double the reported incidence with the >7-day definition. There was a 10% higher between-team variation in match injury incidence rates with the >24-hour time-loss definition versus the >7-day definition. Conclusion: There was a likely higher degree of between-team variation in match injury incidence rates with a >24-hour time-loss definition than with a >7-day definition of injury. However, in professional sports settings, it is likely that the benefits of using a more inclusive definition of injury (improved understanding of clinical demand and the appropriate and accurate reporting of injury risk) outweigh the small increase in variation in reporting consistency. PMID:29581994

  2. Competing Definitions of Schizophrenia: What Can Be Learned From Polydiagnostic Studies?

    DEFF Research Database (Denmark)

    Jansson, Lennart Bertil; Parnas, Josef

    2006-01-01

    not a product of explicit conceptual analyses and empirical studies but defined through consensus with the purpose of improving reliability. The validity status of current definitions and of their predecessors remains unclear. The so-called "polydiagnostic approach" applies different definitions of a disorder...... to the same patient sample in order to compare these definitions on potential validity indicators. We reviewed 92 polydiagnostic sz studies published since the early 1970s. Different sz definitions show a considerable variation concerning frequency, concordance, reliability, outcome, and other validity...... measures. The DSM-IV and the ICD-10 show moderate reliability but both definitions appear weak in terms of concurrent validity, eg, with respect to an aggregation of a priori important features. The first-rank symptoms of Schneider are not associated with family history of sz or with prediction of poor...

  3. Competing definitions of schizophrenia: what can be learned from polydiagnostic studies?

    DEFF Research Database (Denmark)

    Jansson, Lennart B; Parnas, Josef

    2007-01-01

    of explicit conceptual analyses and empirical studies but defined through consensus with the purpose of improving reliability. The validity status of current definitions and of their predecessors remains unclear. The so-called "polydiagnostic approach" applies different definitions of a disorder to the same...... patient sample in order to compare these definitions on potential validity indicators. We reviewed 92 polydiagnostic sz studies published since the early 1970s. Different sz definitions show a considerable variation concerning frequency, concordance, reliability, outcome, and other validity measures....... The DSM-IV and the ICD-10 show moderate reliability but both definitions appear weak in terms of concurrent validity, eg, with respect to an aggregation of a priori important features. The first-rank symptoms of Schneider are not associated with family history of sz or with prediction of poor outcome...

  4. Definition of technology development missions for early space station satellite servicing, volume 1

    Science.gov (United States)

    1983-01-01

    The testbed role of an early manned space station in the context of a satellite servicing evolutionary development and flight demonstration technology plan which results in a satellite servicing operational capability is defined. A satellite servicing technology development mission (a set of missions) to be performed on an early manned space station is conceptually defined.

  5. A study on the nuclear technology policy

    International Nuclear Information System (INIS)

    Yang, M. H.; Kim, H. J.; Chung, W. S.; Lee, T. J.; Yun, S. W.; Jeong, Ik

    2002-01-01

    This study was carried out as a part of institutional activities of KAERI. This study suggested the effective and systematic alternatives for the development of domestic industry through nuclear long-term R and D program while timely responding to the environmental change in local and global sense. First of all, this study investigated the current status and prospect of nuclear power supply, the global technological change of nuclear fuel cycle, the nuclear policy changes of major countries and the role of nuclear energy in East Asian countries. Second, some policy alternatives are suggested in association with the role of national R and D in enhancing industrial competitiveness, the effective management of nuclear long-term R and D program to facilitate technological innovation and the way to enlarge the utilization of nuclear R and D results and radiation technology

  6. Does the Reliability of Reporting in Injury Surveillance Studies Depend on Injury Definition?

    Science.gov (United States)

    Cross, Matthew; Williams, Sean; Kemp, Simon P T; Fuller, Colin; Taylor, Aileen; Brooks, John; Trewartha, Grant; Stokes, Keith

    2018-03-01

    Choosing an appropriate definition for injury in injury surveillance studies is essential to ensure a balance among reporting reliability, providing an accurate representation of injury risk, and describing the nature of the clinical demand. To provide guidance on the choice of injury definition for injury surveillance studies by comparing within- and between-team variability in injury incidence with >24-hour and >7-day time-loss injury definitions in a large multiteam injury surveillance study. Cohort study (diagnosis); Level of evidence, 2. Injury data were reported for 2248 professional rugby union players from 15 Premiership Rugby clubs over 12 seasons. Within-team percentage coefficient of variation and mean between-team standard deviation (expressed as a percentage coefficient of variation) in injury incidence rates (injuries per 1000 player match hours) were calculated. For both variables, a comparison was made between >24-hour and >7-day injury incidence rates in terms of the magnitude of the observed effects. The overall mean incidence across the population with a >24-hour time-loss injury definition was approximately double the reported incidence with the >7-day definition. There was a 10% higher between-team variation in match injury incidence rates with the >24-hour time-loss definition versus the >7-day definition. There was a likely higher degree of between-team variation in match injury incidence rates with a >24-hour time-loss definition than with a >7-day definition of injury. However, in professional sports settings, it is likely that the benefits of using a more inclusive definition of injury (improved understanding of clinical demand and the appropriate and accurate reporting of injury risk) outweigh the small increase in variation in reporting consistency.

  7. Children new technologies and gender: towards the definition of a research agenda

    Directory of Open Access Journals (Sweden)

    Carolina DUEK

    2017-06-01

    Full Text Available The relationship between information and communications technology (ICT and a number of aspects of contem-porary everyday life constitutes a productive field inside cultural studies. The constant enquiries about uses, sociali-zation and representations place ICT in the midst of Social Sciences research in the 21st century. This article aims to compose a research agenda for future research on ICT related to gender, children and play. All those axes have been independently analyzed, but the intersections and articulations we found in our research open new perspectives to question. What do children do with the devices? In which ways, does gender constitute an intervening variable in the dynamics, characters, actions and roles that may (or may not be assumed during games? This article presents a series of dimensions that constitute a possible research agenda organized by the main axes, problems, hypotheses and methodologies on which our actual and future research is projected as a way of contributing to the field in which they are framed.

  8. Biopharming, bananas and bureaucracy: the banana vaccine as a case study for products that straddle the definitional food/drug divide.

    Science.gov (United States)

    Birdsall, Margaux

    2011-01-01

    This paper examines the definition of the terms "food" and "drug" as used in the Food, Drug and Cosmetic Act through the lens of biopharmed products. The paper uses the so-called "banana vaccine" as a case study to highlight the problems that occur when attempting to regulate a product that could be safely used as a food or as a drug. Specifically, the examination of this model illustrates the problems in the current definitional scheme. The paper considers how a product that straddles the definitional line between food and drug could be regulated and proposes a reformation to how the definitions are applied to products to better suit new technology in food and drugs.

  9. Soutien institutionnel à African Technology Policy Studies ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Au départ la division tanzanienne du Réseau d'études sur la politique technologique en Afrique (African Technology Policy Studies Network), et ce, depuis 1984, ATPS-Tanzania est devenu autonome à titre d'organisation non gouvernementale en 2001. Lorsque ATPS-Tanzania recevait un financement stable du siège de ...

  10. Study of Faculty and Information Technology, 2014

    Science.gov (United States)

    Dahlstrom, Eden; Brooks, D. Christopher

    2014-01-01

    In this inaugural year of the faculty technology study, EDUCAUSE Center for Analysis and Research (ECAR) partnered with 151 college/university sites yielding responses from 17,451 faculty respondents across 13 countries. The findings are exploratory in nature, as they cover new ground to help us tell a more comprehensive story about technology…

  11. Institutional Support : African Technology Policy Studies - Tanzania ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    African Technology Policy Studies - Tanzania (ATPS-Tanzania) was registered as a national nongovernmental organization in 2001. ... While resource flows to ATPS-Tanzania from ATPS headquarters in Nairobi were reliable, the organization produced a larger volume of research outputs than most other ATPS national ...

  12. A study on nuclear technology policy

    International Nuclear Information System (INIS)

    Kim, H. J.; Oh, K. B.; Lee, K. S.; Chung, W. S.; Lee, T. J.; Yun, S. W.; Jeong, I.

    2004-01-01

    This study was conducted as a part of institutional activities of KAERI, and the objective of the study is to survey and analyze the change of international environment in nuclear use and research and development environment, and to propose systematic alternatives on technology policy for efficiency and effectiveness of research and development through national R and D program while timely responding to the environmental change in local and global sense. Acknowledging the importance of the relationship between the external environment and the national nuclear R and D strategic planning, this study focused on the two major subjects: (1) the international environmental and technological change attached to the development of nuclear power; (2) the direction and strategy of nuclear R and D to improve effectiveness through national R and D programs as role of electricity in the future society, strategic environment of nuclear use and R and D in the future society, energy environment and nuclear technology development scenario in the future, strategic study on future vision of KAERI and technological road-mapping of national nuclear R and D for enhancing competitiveness

  13. Developing technology pushed breakthroughs: an empirical study

    Directory of Open Access Journals (Sweden)

    Jari Sarja

    2017-12-01

    Full Text Available Developing a technology push product that brings real novelty to the market is difficult, risky and costly. This case study analyzes success factors defined by the literature. True industrial cases, representing Finnish ICT firms in their early phase after a successful market entry, were researched for the success factor analysis. The whole set of the previously introduced success factors were variably supported, and three new factors arose. Because the technology pushed development processes are risky with high failure rates, the validated success factors are valuable knowledge for the developments intensive firm’s management.

  14. The Definition and Treatment of Bulimarexia in College Women--A Pilot Study.

    Science.gov (United States)

    Boskind-Ledahl, Marlene; White, William C., Jr.

    1978-01-01

    A study of college women suffering from bulimarexia, a cyclical eating disorder characterized by bingeing/purging behaviors and abnormally low self-esteem, indicates the importance of sociocultural factors in female role definition. (JMF)

  15. A Case Study of Technology Choices by High School Students

    Science.gov (United States)

    Owens-Hartman, Amy R.

    2015-01-01

    The purpose of this case study was to examine student technology choices when given the freedom to choose technology devices to complete a project-based learning activity in a content area of study. The study also analyzed factors affecting technology choice as well as how technology proficiency scores aligned to technology choices. Patterns and…

  16. Orbit transfer rocket engine technology program: Automated preflight methods concept definition

    Science.gov (United States)

    Erickson, C. M.; Hertzberg, D. W.

    1991-01-01

    The possibility of automating preflight engine checkouts on orbit transfer engines is discussed. The minimum requirements in terms of information and processing necessary to assess the engine'e integrity and readiness to perform its mission were first defined. A variety of ways for remotely obtaining that information were generated. The sophistication of these approaches varied from a simple preliminary power up, where the engine is fired up for the first time, to the most advanced approach where the sensor and operational history data system alone indicates engine integrity. The critical issues and benefits of these methods were identified, outlined, and prioritized. The technology readiness of each of these automated preflight methods were then rated on a NASA Office of Exploration scale used for comparing technology options for future mission choices. Finally, estimates were made of the remaining cost to advance the technology for each method to a level where the system validation models have been demonstrated in a simulated environment.

  17. Definition of Quality Criteria of the Technological Process of Narrow Web UV-Printing

    Directory of Open Access Journals (Sweden)

    Volodymyr Shybanov

    2013-11-01

    Full Text Available The application of Narrow Web UV-flexographic printing has several advantages compared with offset printing. In particular, they are the lack of the operation of water-ink balance setting in the technological process, the ability to print on a wide range of materials and so on. Though the imprint quality is clearly based on standards in offset printing, there are no clearly indicated requirements for Narrow Web UV flexographic printing. The absence of such requirements on quality parameters of the technological process of Narrow Web UV-Printing predetermined conducting its analysis with the help of expert surveys.

  18. College Students' Definitions of Intimate Partner Violence: A Comparative Study of Three Chinese Societies.

    Science.gov (United States)

    Jiao, Yanpeng; Sun, Ivan Y; Farmer, Ashley K; Lin, Kai

    2016-04-01

    Although a large number of studies have been conducted worldwide to examine various aspects of intimate partner violence (IPV), comparative study of people's views on such violence in Chinese societies has been scarce. Using survey data collected from more than 850 college students in China, Hong Kong, and Taiwan, this study specifically assessed the impact of attitudes toward gender role and violence, personal and vicarious experience, demographic characteristics, and locality on students' definitions of IPV. The Taiwanese students were most likely to define a broader range of abusive behavior as IPV, followed by Hong Kong and Beijing students. Gender role and violence attitudes appeared to be most important predictors of IPV definitions. College students who supported the notion of male dominance were more likely to have a narrower definition of IPV, whereas those who viewed domestic violence as crime were more inclined to have a broader definition of IPV. Implications for future research and policy were discussed. © The Author(s) 2014.

  19. Study on construction technology for repository

    International Nuclear Information System (INIS)

    Tanai, Kenji; Iwasa, Kengo; Hasegawa, Hiroshi; Miura, Kazuhiko; Okutsu, Kazuo; Kobayashi, Masaaki

    1999-11-01

    For the construction of underground facilities comprising access tunnels, connecting tunnels, main tunnels and disposal tunnels, a large number of tunnels will be excavated in deep rock formations. These excavations will extend hundreds kilometers in total length. Therefore, special attention must be paid, to transporting large volume of debris, ventilation, emergency escape routes in case of accident, and other factors. In addition, special attention must also paid to potential accidents which might in underground excavations, including unstable facing phenomena (such as collapse and swelling of facing at weak layer sections), spring water flow resulting collapse of rock, gas eruption, and rock burst. While considering these factors to be emphasized during the construction of geological disposal facilities, the investigation reviewed the existing working methods on individual construction technologies of access tunnels, main tunnels, connecting tunnels, disposal tunnels, and disposal pit, based on the recognition that the present state deals with a wide range of geological environments, and conducted investigation about the construction methods for each tunnel on the basis current technologies, and described the outline of these methods. Furthermore, for the items to be particularly emphasized on site characterization and siting data such as ground pressure and spring water, the investigation reviewed the current countermeasure works, and made survey on the phenomena appeared during actual tunnel construction works and their countermeasures, and carried out a study on effectiveness of these countermeasures. This constructing of disposal site in deep geological formations is basically possible by applying, or confirming, current excavation technologies for tunnels and underground facilities. A systematic construction system combines separate technologies relating to construction, (excavation technology, tunnel support work method, etc.). Such systems can be

  20. Reconsidering the International Association for the Study of Pain definition of pain.

    Science.gov (United States)

    Cohen, Milton; Quintner, John; van Rysewyk, Simon

    2018-03-01

    The definition of pain promulgated by the International Association for the Study of Pain (IASP) is widely accepted as a pragmatic characterisation of that human experience. Although the Notes that accompany it characterise pain as "always subjective," the IASP definition itself fails to sufficiently integrate phenomenological aspects of pain. This essay reviews the historical development of the IASP definition, and the commentaries and suggested modifications to it over almost 40 years. Common factors of pain experience identified in phenomenological studies are described, together with theoretical insights from philosophy and biology. A fuller understanding of the pain experience and of the clinical care of those experiencing pain is achievable through greater attention to the phenomenology of pain, the social "intersubjective space" in which pain occurs, and the limitations of language. Based on these results, a revised definition of pain is offered: Pain is a mutually recognizable somatic experience that reflects a person's apprehension of threat to their bodily or existential integrity.

  1. Proteomic Technologies for the Study of Osteosarcoma

    Directory of Open Access Journals (Sweden)

    Stephanie D. Byrum

    2012-01-01

    Full Text Available Osteosarcoma is the most common primary bone cancer of children and is established during stages of rapid bone growth. The disease is a consequence of immature osteoblast differentiation, which gives way to a rapidly synthesized incompletely mineralized and disorganized bone matrix. The mechanism of osteosarcoma tumorogenesis is poorly understood, and few proteomic studies have been used to interrogate the disease thus far. Accordingly, these studies have identified proteins that have been known to be associated with other malignancies, rather than being osteosarcoma specific. In this paper, we focus on the growing list of available state-of-the-art proteomic technologies and their specific application to the discovery of novel osteosarcoma diagnostic and therapeutic targets. The current signaling markers/pathways associated with primary and metastatic osteosarcoma that have been identified by early-stage proteomic technologies thus far are also described.

  2. Definition of information technology architectures for continuous data management and medical device integration in diabetes.

    Science.gov (United States)

    Hernando, M Elena; Pascual, Mario; Salvador, Carlos H; García-Sáez, Gema; Rodríguez-Herrero, Agustín; Martínez-Sarriegui, Iñaki; Gómez, Enrique J

    2008-09-01

    The growing availability of continuous data from medical devices in diabetes management makes it crucial to define novel information technology architectures for efficient data storage, data transmission, and data visualization. The new paradigm of care demands the sharing of information in interoperable systems as the only way to support patient care in a continuum of care scenario. The technological platforms should support all the services required by the actors involved in the care process, located in different scenarios and managing diverse information for different purposes. This article presents basic criteria for defining flexible and adaptive architectures that are capable of interoperating with external systems, and integrating medical devices and decision support tools to extract all the relevant knowledge to support diabetes care.

  3. Definition of Quality Criteria of the Technological Process of Narrow Web UV-Printing

    OpenAIRE

    Volodymyr Shybanov; Vsevolod Senkivsky; Vyacheslav Repeta; Natalia Gurgal

    2013-01-01

    The application of Narrow Web UV-flexographic printing has several advantages compared with offset printing. In particular, they are the lack of the operation of water-ink balance setting in the technological process, the ability to print on a wide range of materials and so on. Though the imprint quality is clearly based on standards in offset printing, there are no clearly indicated requirements for Narrow Web UV flexographic printing. The absence of such requirements on quality parameters o...

  4. What is biocompatibility?: a new definition based on the latest technology.

    Science.gov (United States)

    Mertz, L

    2013-07-01

    Biomaterials have been evolving for a number of decades, and it is about time that better categorizations of biocompatibility were devised to describe them. At least that is the view of Buddy Ratner, professor of bioengineering and chemical engineering, and Michael L. and Myrna Darland Endowed Chair in Technology Commercialization at the University of Washington, as well as director of University of Washington Engineered Biomaterials (UWEB), the university's engineered biomaterials program.

  5. A Study of KHNP Nuclear Power Plant Technology Level Evaluation

    International Nuclear Information System (INIS)

    Yang, Seung Han; Lee, Sung Jin; Kim, Yo Han

    2016-01-01

    KHNP's 2030 mid and long term plan goal in technology field is securing global No. 1 NPP technology level. Quantifying technology level for this purpose, technology level at present should be surveyed. Technology level of South Korea has been surveyed by KISTEP (Korea Institute of S and T Evaluation and Planning) every two year but the technology level of KHNP has not been surveyed by any organization including KHNP itself. Also the size of technology surveyed by KISTEP was too broad to quantifying technology level of KHNP. In this paper, technology level of KHNP and South Korea are presented. In this study, NPP related technologies were divided into Level I and Level II technologies and conducted a survey for each Level II technologies using Delphi questionnaire survey that is widely used in technology level evaluation. The results of technology level and gap will be used from strategic point of view and also as a reference data for technology improvement planning

  6. A Study of KHNP Nuclear Power Plant Technology Level Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Seung Han; Lee, Sung Jin; Kim, Yo Han [KHNP, Daejeon (Korea, Republic of)

    2016-05-15

    KHNP's 2030 mid and long term plan goal in technology field is securing global No. 1 NPP technology level. Quantifying technology level for this purpose, technology level at present should be surveyed. Technology level of South Korea has been surveyed by KISTEP (Korea Institute of S and T Evaluation and Planning) every two year but the technology level of KHNP has not been surveyed by any organization including KHNP itself. Also the size of technology surveyed by KISTEP was too broad to quantifying technology level of KHNP. In this paper, technology level of KHNP and South Korea are presented. In this study, NPP related technologies were divided into Level I and Level II technologies and conducted a survey for each Level II technologies using Delphi questionnaire survey that is widely used in technology level evaluation. The results of technology level and gap will be used from strategic point of view and also as a reference data for technology improvement planning.

  7. Word Definitional Skills in School age Persian Speaking Children: A Developmental Study on Form

    Directory of Open Access Journals (Sweden)

    Talieh Zarifian

    2015-09-01

    Full Text Available Objectives: Word definitional skills (WDSs were classified according to the quality of both semantic content and syntactic form. The aim of the present study was to investigate the syntactic development in WDSs in typically developing school- age children. Methods: In this cross-sectional and descriptive-analytical study,  150 of typically developing school-age children participated by the  multistage sampling method in the second to sixth grade from primary schools in 1, 7 and 17 municipal  districts of Tehran. The definition skill was assessed with word definition task. The reliability was assessed by two independent values and the validity was determined by the content. The results were  analyzed by the SPSS (22th version  statistical software and with the method of independent- samples T test, univariate analysis of variance and Tukey test. Results: The form analysis revealed that all children use phrase/clause  or simple sentence, transitional form and Aristotelian form frequently, but by increasing the age, definitions were developed from simple syntactic structure into Aristotelian form, in fact mean score of the form in word definition was significantly increased by age (P<0.001. Discussion: Owing to the findings of this study, the development of word definitional skills in terms of form was developed from phrase/clause or simple sentence and transitional form responses into Aristotelian form. Also WDSs are closely related to academic success and the development of literacy.

  8. Consensus statement on injury definitions and data collection procedures for studies of injuries in rugby union

    Science.gov (United States)

    Fuller, Colin W; Molloy, Michael G; Bagate, Christian; Bahr, Roald; Brooks, John H M; Donson, Hilton; Kemp, Simon P T; McCrory, Paul; McIntosh, Andrew S; Meeuwisse, Willem H; Quarrie, Kenneth L; Raftery, Martin; Wiley, Preston

    2007-01-01

    Wide variations in the definitions and methodologies used for studies of injuries in rugby union have created inconsistencies in reported data and made interstudy comparisons of results difficult. The International Rugby Board established a Rugby Injury Consensus Group (RICG) to reach an agreement on the appropriate definitions and methodologies to standardise the recording of injuries and reporting of studies in rugby union. The RICG reviewed the consensus definitions and methodologies previously published for football (soccer) at a meeting in Dublin in order to assess their suitability for and application to rugby union. Following this meeting, iterative draft statements were prepared and circulated to members of the RICG for comment; a follow‐up meeting was arranged in Dublin, at which time all definitions and procedures were finalised. At this stage, all authors confirmed their agreement with the consensus statement. The agreed document was presented to and approved by the International Rugby Board Council. Agreement was reached on definitions for injury, recurrent injury, non‐fatal catastrophic injury, and training and match exposures, together with criteria for classifying injuries in terms of severity, location, type, diagnosis and causation. The definitions and methodology presented in this consensus statement for rugby union are similar to those proposed for football. Adoption of the proposals presented in this consensus statement should ensure that more consistent and comparable results will be obtained from studies of injuries within rugby union. PMID:17452684

  9. The Category of Definiteness Indefiniteness through the Prism of Functional Approach to Language Studies

    Directory of Open Access Journals (Sweden)

    Labetova Victoria

    2016-12-01

    Full Text Available Background: The studying of language phenomena with the emphasis on their functional component is topical for modern linguistics. This approach gives a boost to thinking over various (semantic, morphological, syntactic forms through the prism of their functional-semantic load. The analysis of the category of definiteness/indefiniteness from this point of view allows defining the actual theoretical categorial model and the system of its expressive means. Purpose: The aim of the article is to define the essence and the bounds of the category of definiteness/indefiniteness in the Ukrainian language and reveal its expressive potential. Results: The category of definiteness/indefiniteness is a universal category that is based on the symbiosis of psychic, cognitive and lingual spheres. Its functional potential is accumulated in cognitive and communicative fields so it is not restricted only to defining spheres of definiteness or indefiniteness. Not only do things or objects appear definite or indefinite in the process of communication or its interpretation but also their characteristics or properties may acquire these senses. The category of definiteness/indefiniteness correlates with other functional-semantic categories, which leads to its complicated and ramified field structure with diffuse and peripheral zones. Discussion: The studying of the widened structure of the functional-semantic field of definiteness/indefiniteness and organizing all possible (regular, typical, occasional, etc. means of its expression is a perspective approach. It is important to study the category of definiteness/indefiniteness in different types of discourse to reveal the logic of its functioning.

  10. The current status of usability studies of information technologies in China: a systematic study.

    Science.gov (United States)

    Lei, Jianbo; Xu, Lufei; Meng, Qun; Zhang, Jiajie; Gong, Yang

    2014-01-01

    To systematically review and analyze the current status and characteristics of usability studies in China in the field of information technology in general and in the field of healthcare in particular. We performed a quantitative literature analysis in three major Chinese academic databases and one English language database using Chinese search terms equivalent to the concept of usability. Six hundred forty-seven publications were selected for analysis. We found that in China the literature on usability in the field of information technology began in 1994 and increased thereafter. The usability definitions from ISO 9241-11:1998 and Nielsen (1993) have been widely recognized and cited. Authors who have published several publications are rare. Fourteen journals have a publishing rate over 1%. Only nine publications about HIT were identified. China's usability research started relatively late. There is a lack of organized research teams and dedicated usability journals. High-impact theoretical studies are scarce. On the application side, no original and systematic research frameworks have been developed. The understanding and definition of usability is not well synchronized with international norms. Besides, usability research in HIT is rare. More human and material resources need to be invested in China's usability research, particularly in HIT.

  11. Towards the Biological Understanding of CTC: Capture Technologies, Definitions and Potential to Create Metastasis

    Directory of Open Access Journals (Sweden)

    Ana M.C. Barradas

    2013-12-01

    Full Text Available Circulating Tumor Cells (CTC are rare cells originated from tumors that travel into the blood stream, extravasate to different organs of which only a small fraction will develop into metastasis. The presence of CTC enumerated with the CellSearch system is associated with a relative short survival and their continued presence after the first cycles of therapy indicates a futile therapy in patients with metastatic carcinomas. Detailed characterization of CTC holds the promise to enable the choice of the optimal therapy for the individual patients during the course of the disease. The phenotype, physical and biological properties are however not well understood making it difficult to assess the merit of recent technological advancements to improve upon the capture of CTC or to evaluate their metastatic potential. Here we will discuss the recent advances in the classification of CTC captured by the CellSearch system, the implications of their features and numbers. Latest capture platforms are reviewed and placed in the light of technology improvements needed to detect CTC. Physical properties, phenotype, viability and proliferative potential and means to assess their proliferation and metastatic capacity will be summarized and placed in the context of the latest CTC capture platforms.

  12. Consensus definitions and application guidelines for control groups in cerebrospinal fluid biomarker studies in multiple sclerosis

    DEFF Research Database (Denmark)

    Teunissen, Charlotte; Menge, Til; Altintas, Ayse

    2013-01-01

    The choice of appropriate control group(s) is critical in cerebrospinal fluid (CSF) biomarker research in multiple sclerosis (MS). There is a lack of definitions and nomenclature of different control groups and a rationalized application of different control groups. We here propose consensus......). Furthermore, we discuss the application of these control groups in specific study designs, such as for diagnostic biomarker studies, prognostic biomarker studies and therapeutic response studies. Application of these uniform definitions will lead to better comparability of biomarker studies and optimal use...

  13. Luminex® xMAP® technology is an effective strategy for high-definition human leukocyte antigen typing of cord blood units prior to listing.

    Science.gov (United States)

    Guarene, Marco; Badulli, Carla; Cremaschi, Anna L; Sbarsi, Ilaria; Cacciatore, Rosalia; Tinelli, Carmine; Pasi, Annamaria; Bergamaschi, Paola; Perotti, Cesare G

    2018-05-01

    Allele-level donor-recipient match at HLA-A, HLA-B, HLA-C and HLA-DRB1 loci impacts the outcome after cord blood transplantation for hematologic malignancies and modifies the strategy of donor selection. High definition of both class I and II HLA loci at time of listing is a way to improve the attractiveness of cord blood bank inventories, reducing the time for donor search and procurement and simplifying donor choice, in particular, for patients of non-European heritage. In 2014, Luminex ® xMAP ® technology was introduced in our laboratory practice and was applied to cord blood units typing. In this study, we evaluated the impact of this strategy in comparison with the platform in use until 2013, relying on LiPA reverse polymerase chain reaction-sequence-specific oligonucleotide (revPCR-SSO) plus polymerase chain reaction-sequence-specific primer (PCR-SSP). In 2014, the time for testing was shorter (141 vs 181 days on average), the number of test repetitions was lower (in particular for HLA-A locus, p = 0.026), and the cost reduced (240.7 vs 395.6 euros per unit on average) compared to 2013, demonstrating that Luminex xMAP technology is superior to the previous approach. Luminex xMAP platform has useful application in cord blood banking programs, to achieve high-definition HLA typing of cord blood units at the time of banking in a quick, accurate, and cost-effective manner.

  14. Technology integration box beam failure study

    Science.gov (United States)

    Shuart, M. J.; Ambur, Damodar R.; Davis, D. D., Jr.; Davis, R. C.; Farley, G. L.; Lotts, C. G.; Wang, J. T.

    1993-01-01

    Composite structures have the potential to be cost-effective, structurally efficient primary aircraft structures. The Advanced Composites Technology (ACT) Program has the goal to develop the technology to exploit this potential for heavily loaded aircraft structures. As part of the ACT Program, Lockheed Aeronautical Systems Company completed the design and fabrication of the Technology Integration Box Beam (TIBB). The TIBB is an advanced composite prototype structure for the center wing section of the C-130 aircraft. Lockheed subjected the TIBB to downbending, upbending, torsion and combined upbending and torsion load conditions to verify the design. The TIBB failed at 83 percent of design ultimate load for the combined upbending and torsion load condition. The objective of this paper is to describe the mechanisms that led to the failure of the TIBB. The results of a comprehensive analytical and experimental study are presented. Analytical results include strain and deflection results from both a global analysis of the TIBB and a local analysis of the failure region. These analytical results are validated by experimental results from the TIBB tests. The analytical and experimental results from the TIBB tests are used to determine a sequence of events that resulted in failure of the TIBB. A potential cause of failure is high stresses in a stiffener runout region. Analytical and experimental results are also presented for a stiffener runout specimen that was used to simulate the TIBB failure mechanisms.

  15. Three-dimensional laparoscopy vs 2-dimensional laparoscopy with high-definition technology for abdominal surgery

    DEFF Research Database (Denmark)

    Fergo, Charlotte; Burcharth, Jakob; Pommergaard, Hans-Christian

    2017-01-01

    BACKGROUND: This systematic review investigates newer generation 3-dimensional (3D) laparoscopy vs 2-dimensional (2D) laparoscopy in terms of error rating, performance time, and subjective assessment as early comparisons have shown contradictory results due to technological shortcomings. DATA...... Central Register of Controlled Trials database. CONCLUSIONS: Of 643 articles, 13 RCTs were included, of which 2 were clinical trials. Nine of 13 trials (69%) and 10 of 13 trials (77%) found a significant reduction in performance time and error, respectively, with the use of 3D-laparoscopy. Overall, 3D......-laparoscopy was found to be superior or equal to 2D-laparoscopy. All trials featuring subjective evaluation found a superiority of 3D-laparoscopy. More clinical RCTs are still awaited for the convincing results to be reproduced....

  16. How common is domestic violence against women? The definition of partner abuse in prevalence studies.

    Science.gov (United States)

    Hegarty, K; Roberts, G

    1998-02-01

    We systematically reviewed studies of the prevalence of domestic violence. Selected overseas community studies were compared with all Australian prevalence studies found to be published. Twelve-month prevalence estimates of partner abuse in Australia varied from 2.1 per cent to 28.0 per cent, depending mainly on the definition of domestic violence used in each study. Implications of the lack of a precise definition result in varying operationalised definitions of partner abuse, from all types of violence in relationships (including a single minor violent incident), through to only those violent incidents that are classified as a crime. Recommendations for any future prevalence studies in this field include the need to collect frequency data which reflected the fact that partner abuse against women is a complex behavioural phenomenon involving emotional, physical and sexual abuse against a partner, not just simply physical incidents.

  17. Use of molecular binding pair technology for definitive product marking and identification

    Science.gov (United States)

    Rittenburg, James H.

    1998-04-01

    Counterfeiting and diversion of brand name products is a significant worldwide problem. Loss of revenue to the manufacturers is obviously important, however erosion of consumer confidence, and liability for adverse health effects or performance caused by poor quality product can be of even greater significance. Biocode has developed a novel approach to product marking and identification that utilizes molecular binding pair technologies such as immunoassay. The sensitivity, specificity, and ease of use of immunoassay provides a powerful method for detecting trace levels of intentionally added chemical markers. Using the diversity of the immune response, Biocode has developed a library of binding molecules and highly sensitive immunoassay systems for detection and measurement of a variety of chemical markers. The markers have been selected based on their stability and compatibility within various types of products. For food, beverage, and pharmaceutical applications, common and naturally occurring food ingredients and pharmaceutical excipients provide markers which are safe, readily available, and already approved for use. For other applications such as fuel and lubricant marking. Solubility and chemical stability of the markers are a major consideration. In addition to incorporating markers directly into products, Biocode has also developed invisible inks that can be printed onto the surface of products, packaging, or labels. The trace levels of marker that is printed onto the surface of a product or package can only be revealed by using the complementary binding pair that has been developed by Biocode. This technology provides for simple field tests and very high level of security as it is virtually impossible to copy.

  18. Coal use and coal technology study (KIS)

    International Nuclear Information System (INIS)

    Kram, T.; Okken, P.A.; Gerbers, D.; Lako, P.; Rouw, M.; Tiemersma, D.N.

    1991-11-01

    The title study aims to assess the possible role for coal in the Netherlands energy system in the first decades of the next century and the part new coal conversion technologies will play under various conditions. The conditions considered relate to (sectoral) energy demand derived from national scenarios in an international context, to energy prices, to environmental constraints (acidification, solid waste management and disposal) and to the future role for nuclear power production. Targets for reduction of greenhouse gas emissions are not explicitly included, but resulting CO 2 emissions are calculated for each variant case. The part that coal can play in the Dutch energy supply is calculated and analyzed by means

  19. Reactive membrane technology: Two case studies

    DEFF Research Database (Denmark)

    Zeuner, Birgitte; Luo, Jianquan; Pinelo, Manuel

    2014-01-01

    investigated the effect of applied pressure, enzyme concentration, pH, and membrane properties on fouling-induced enzyme immobilization. In another study, the production of the human milk oligosaccharide 3’-sialyllactose by an engineered sialidase from Trypanosoma rangeli (Tr6) was significantly improved......Enzymatic processes are generally sustainable processes that use mild conditions and natural substrates. Membrane technology can be employed for enzyme immobilization as well as for recycling free enzymes. Using alcohol dehydrogenase (ADH) as part of a process to recycle CO2 to methanol, we...... in an enzymatic membrane reactor. The entire process can be improved by employing a series of ultra- and nanofiltrations....

  20. Elementary Teachers' Experiences with Technology Professional Development and Using Technology in the Classroom: A Case Study

    Science.gov (United States)

    Grizzle, Pamela Lavon

    2016-01-01

    In order for educators to prepare students for technology-enhanced learning educators must first be prepared. The digital divide and technology professional development are two factors impacting the depth at which technology is integrated into the classroom. The local problem addressed in this study was that the impact of technology professional…

  1. CFM technologies for space transportation: Multipurpose hydrogen testbed system definition and tank procurement

    Science.gov (United States)

    Fox, E. C.; Kiefel, E. R.; Mcintosh, G. L.; Sharpe, J. B.; Sheahan, D. R.; Wakefield, M. E.

    1993-01-01

    The development of a test bed tank and system for evaluating cryogenic fluid management technologies in a simulated upper stage liquid hydrogen tank is covered. The tank is 10 ft long and is 10 ft in diameter, and is an ASME certified tank constructed of 5083 aluminum. The tank is insulated with a combination of sprayed on foam insulation, covered by 45 layers of double aluminized mylar separated by dacron net. The mylar is applied by a continuous wrap system adapted from commercial applications, and incorporates variable spacing between the mylar to provide more space between those layers having a high delta temperature, which minimizes heat leak. It also incorporates a unique venting system which uses fewer large holes in the mylar rather than the multitude of small holes used conventionally. This significantly reduces radiation heat transfer. The test bed consists of an existing vacuum chamber at MSFC, the test bed tank and its thermal control system, and a thermal shroud (which may be heated) surrounding the tank. Provisions are made in the tank and chamber for inclusion of a variety of cryogenic fluid management experiments.

  2. Feasibility study of introducing smart technologies in Barcelona Airport

    OpenAIRE

    Garcia Guiu, Anna

    2016-01-01

    The objectives of the project are to define and evaluate the diferent alternatives for implementing new Smart concepts and technologies in Barcelona Airport. The structure of the project activities will follow an initial approach (not exhaustive) consisting of: Context and background, justification of the project, assessment of Barcelona Airport baseline, identification of needs, technolgy Stae-of the art, definition of potential solutions and implementation scenarios, evaluation of altern...

  3. Characterizing the technology firm : An exploratory study

    NARCIS (Netherlands)

    Grinstein, A.; Goldman, Arieh

    Technology firms occupy a central position in modern economies. They drive economic growth, productivity gains and have created new industries and innovative products. Many will agree that technology firms are distinguished from others in their emphasis on technological activities. Since this

  4. Reliability studies in a developing technology

    International Nuclear Information System (INIS)

    Mitchell, L.A.; Osgood, C.; Radcliffe, S.J.

    1975-01-01

    The standard methods of reliability analysis can only be applied if valid failure statistics are available. In a developing technology the statistics which have been accumulated, over many years of conventional experience, are often rendered useless by environmental effects. Thus new data, which take account of the new environment, are required. This paper discusses the problem of optimizing the acquisition of these data when time-scales and resources are limited. It is concluded that the most fruitful strategy in assessing the reliability of mechanisms is to study the failures of individual joints whilst developing, where necessary, analytical tools to facilitate the use of these data. The approach is illustrated by examples from the field of tribology. Failures of rolling element bearings in moist, high-pressure carbon dioxide illustrate the important effects of apparently minor changes in the environment. New analytical techniques are developed from a study of friction failures in sliding joints. (author)

  5. Comparative Analysis of Institutional Policy Definitions of Plagiarism: A Pan-Canadian University Study

    Science.gov (United States)

    Eaton, Sarah Elaine

    2017-01-01

    This article shares the findings of a study investigating institutional policy definitions of plagiarism at twenty English-speaking Canadian universities. The types of primary sources consulted for this study included: (1) university academic calendars for 2016-2017, (2) institutional policies on academic misconduct, and (3) student academic codes…

  6. Recommendations for the definition of clinical responder in insulin preservation studies.

    Science.gov (United States)

    Beam, Craig A; Gitelman, Stephen E; Palmer, Jerry P

    2014-09-01

    Clinical responder studies should contribute to the translation of effective treatments and interventions to the clinic. Since ultimately this translation will involve regulatory approval, we recommend that clinical trials prespecify a responder definition that can be assessed against the requirements and suggestions of regulatory agencies. In this article, we propose a clinical responder definition to specifically assist researchers and regulatory agencies in interpreting the clinical importance of statistically significant findings for studies of interventions intended to preserve β-cell function in newly diagnosed type 1 diabetes. We focus on studies of 6-month β-cell preservation in type 1 diabetes as measured by 2-h-stimulated C-peptide. We introduce criteria (bias, reliability, and external validity) for the assessment of responder definitions to ensure they meet U.S. Food and Drug Administration and European Medicines Agency guidelines. Using data from several published TrialNet studies, we evaluate our definition (no decrease in C-peptide) against published alternatives and determine that our definition has minimum bias with external validity. We observe that reliability could be improved by using changes in C-peptide later than 6 months beyond baseline. In sum, to support efficacy claims of β-cell preservation therapies in type 1 diabetes submitted to U.S. and European regulatory agencies, we recommend use of our definition. © 2014 by the American Diabetes Association. Readers may use this article as long as the work is properly cited, the use is educational and not for profit, and the work is not altered.

  7. A study on nuclear technology policy

    International Nuclear Information System (INIS)

    Yang, M. H.; Kim, H. J.; Chung, W. S.; Yun, S. W.; Kim, H. S.

    2001-01-01

    This study was carried out as a part of institutional activities of KAERI. Major research area are as follows; Future directions and effects for national nuclear R and D to be resulted from restructuring of electricity industry are studied. Comparative study was carried out between nuclear energy and other energy sources from the point of views of environmental effects by introducing life cycle assessment(LCA) method. Japanese trends of reestablishment of nuclear policy such as restructuring of nuclear administration system and long-term plan of development and use of nuclear energy are also investigated, and Russian nuclear development program and Germany trends for phase-out of nuclear electricity generation are also investigated. And trends of the demand and supply of energy in eastern asian countries in from the point of view of energy security and tension in the south china sea are analyzed and investigation of policy trends of Vietnam and Egypt for the development and use of nuclear energy for the promotion of nuclear cooperation with these countries are also carried out. Due to the lack of energy resources and high dependence of imported energy, higher priority should be placed on the use of localized energy supply technology such as nuclear power. In this connection, technological development should be strengthened positively in order to improve economy and safety of nuclear energy and proliferation resistance of nuclear fuel cycle and wide ranged use of radiation and radioisotopes and should be reflected in re-establishment of national comprehensive promotion plan of nuclear energy in progress

  8. A study on nuclear technology policy

    Energy Technology Data Exchange (ETDEWEB)

    Yang, M H; Kim, H J; Chung, W S; Yun, S W; Kim, H S

    2001-01-01

    This study was carried out as a part of institutional activities of KAERI. Major research area are as follows; Future directions and effects for national nuclear R and D to be resulted from restructuring of electricity industry are studied. Comparative study was carried out between nuclear energy and other energy sources from the point of views of environmental effects by introducing life cycle assessment(LCA) method. Japanese trends of reestablishment of nuclear policy such as restructuring of nuclear administration system and long-term plan of development and use of nuclear energy are also investigated, and Russian nuclear development program and Germany trends for phase-out of nuclear electricity generation are also investigated. And trends of the demand and supply of energy in eastern asian countries in from the point of view of energy security and tension in the south china sea are analyzed and investigation of policy trends of Vietnam and Egypt for the development and use of nuclear energy for the promotion of nuclear cooperation with these countries are also carried out. Due to the lack of energy resources and high dependence of imported energy, higher priority should be placed on the use of localized energy supply technology such as nuclear power. In this connection, technological development should be strengthened positively in order to improve economy and safety of nuclear energy and proliferation resistance of nuclear fuel cycle and wide ranged use of radiation and radioisotopes and should be reflected in re-establishment of national comprehensive promotion plan of nuclear energy in progress.

  9. Goal Definition

    DEFF Research Database (Denmark)

    Bjørn, Anders; Laurent, Alexis; Owsianiak, Mikołaj

    2018-01-01

    The goal definition is the first phase of an LCA and determines the purpose of a study in detail. This chapter teaches how to perform the six aspects of a goal definition: (1) Intended applications of the results, (2) Limitations due to methodological choices, (3) Decision context and reasons...... for carrying out the study, (4) Target audience , (5) Comparative studies to be disclosed to the public and (6) Commissioner of the study and other influential actors. The instructions address both the conduct and reporting of a goal definition and are largely based on the ILCD guidance document (EC...

  10. A preliminary study on the definitions and differences of main types of business arrangements

    Directory of Open Access Journals (Sweden)

    Anderson Tiago Peixoto Gonçalves

    2012-08-01

    Full Text Available With the growth of competitiveness and market requirements, several companies have been jointly organized with the aim of forming partnerships, forming the so-called Business Arrangements, to ensure that competitive advantages are achieved. This article came from the need to review the definitions and differences between the main types of existing Business Arrangements, as in the literature have been used different nomenclatures and classifications, either in terms of how the Arrangement is managed, how it is organized, the according to which members carry out their activities, how is the flow of resources and information, the degree of coordination and interaction, the form of production organization, and the strategies adopted. It is a basic research, descriptive and literature, which sought to collect the relevant sources, definitions about each Arrangement to meet the goal of the article is to study the definitions and differences between the main types of Business Arrangements. The article is justified by the scarcity of uniform definitions in the literature that make it possible to visualize the differences between each of the types of Arrangements, especially those in which the definitions are more similar.

  11. [An overview of the definition and implementation of the Brazilian National Policy on Health Data and Information Technology].

    Science.gov (United States)

    Cavalcante, Ricardo Bezerra; Kerr-Pinheiro, Marta Macedo; Guimarães, Eliete Albano de Azevedo; Miranda, Richardson Machado

    2015-05-01

    The This qualitative study aimed to analyze the development and implementation of the Brazilian National Policy on Health Data and Information Technology (NPIIH). We analyzed documents and applied an online questionnaire to the experts involved in developing the policy. The data were submitted to content analysis using the categorical thematic modality. The PNIIS is the target of debate and proposals at various levels. Provisions have appeared in parallel to regulate measures on health data and information technology. Community participation in developing this policy and the convergence of laws, standards, resolutions, and policy-making levels in a common and broadly acknowledged and enforced policy are challenges, in addition to linking the public and private sectors. The study concludes that the National Policy on Health Data and Information Technology is making gradual progress, predominantly in theoretical debates, revisions, and updates. There are numerous challenges for its implementation and a prevailing need for legitimation.

  12. Definition of propulsion system for V/STOL research and technology aircraft

    Science.gov (United States)

    1977-01-01

    Wind tunnel test support, aircraft contractor support, a propulsion system computer card deck, preliminary design studies, and propulsion system development plan are reported. The Propulsion system consists of two lift/cruise turbofan engines, one turboshaft engine and one lift fan connected together with shafting into a combiner gearbox. Distortion parameter levels from 40 x 80 test data were within the established XT701-AD-700 limits. The three engine-three fan system card deck calculates either vertical or conventional flight performance, installed or uninstalled. Design study results for XT701 engine modifications, bevel gear cross shaft location, fixed and tilt fan frames and propulsion system controls are described. Optional water-alcohol injection increased total net thrust 10.3% on a 90 F day. Engines have sufficient turbine life for 500 hours of the RTA duty cycle.

  13. Vacuum Technology in the study of Graphene

    International Nuclear Information System (INIS)

    Ghoshal, A K; Banerjee, S N; Chakraborty, D

    2012-01-01

    Graphene, an allotrope of carbon is a two-dimensional sheet of covalently bonded carbon atoms that has been attracting great attention in the field of electronics. In a recent review graphene is defined as a flat monolayer of carbon atoms tightly packed into a 2-D honeycomb lattice. A survey has been made of the production processes and instrumentation for characterization of graphene. In the production of graphene, the methods mainly used are Epitaxial growth, oxide reduction, growth from metal-carbon melts, growth from sugar. In the characterization of graphene, the instruments that are mainly used to study the atomic properties, electronic properties, optical properties, spin properties are Scanning Electron Microscopy, Transmission Electron Microscopy, Raman Spectroscopy. In all these instruments high or ultra-high vacuum is required. This paper attempts to correlate vacuum technology in the production and characterization of graphene.

  14. Competing Definitions of Schizophrenia: What Can Be Learned From Polydiagnostic Studies?

    DEFF Research Database (Denmark)

    Jansson, Lennart Bertil; Parnas, Josef

    2007-01-01

    The contemporary diagnoses of schizophrenia (sz)—Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition (DSM-IV) and International Classification of Diseases,10th Revision (ICD-10)—are widely considered as important scientific achievements. However, these algorithms were...... not a product of explicit conceptual analyses and empirical studies but defined through consensus with the purpose of improving reliability. The validity status of current definitions and of their predecessors remains unclear. The so-called "polydiagnostic approach" applies different definitions of a disorder...

  15. Performance of gout definitions for genetic epidemiological studies: analysis of UK Biobank.

    Science.gov (United States)

    Cadzow, Murray; Merriman, Tony R; Dalbeth, Nicola

    2017-08-09

    Many different combinations of available data have been used to identify gout cases in large genetic studies. The aim of this study was to determine the performance of case definitions of gout using the limited items available in multipurpose cohorts for population-based genetic studies. This research was conducted using the UK Biobank Resource. Data, including genome-wide genotypes, were available for 105,421 European participants aged 40-69 years without kidney disease. Gout definitions and combinations of these definitions were identified from previous epidemiological studies. These definitions were tested for association with 30 urate-associated single-nucleotide polymorphisms (SNPs) by logistic regression, adjusted for age, sex, waist circumference, and ratio of waist circumference to height. Heritability estimates under an additive model were generated using GCTA version 1.26.0 and PLINK version 1.90b3.32 by partitioning the genome. There were 2066 (1.96%) cases defined by self-report of gout, 1652 (1.57%) defined by urate-lowering therapy (ULT) use, 382 (0.36%) defined by hospital diagnosis, 1861 (1.76%) defined by hospital diagnosis or gout-specific medications and 2295 (2.18%) defined by self-report of gout or ULT use. Association with gout at experiment-wide significance (P genetic epidemiological studies of gout.

  16. Revolutionizing The Run: A Wearable Technology Study

    OpenAIRE

    Lindamood Jr, Stephen Douglas

    2014-01-01

    Recent advances in technology are reshaping and enhancing the role of the industrial designer. While industrial designers are already trained to be experts in process and possess a wide range of skills, there must be a higher level of fusion between design, science, and technology than ever before. This paradigm presents an opportunity in the emerging field of wearable technology; industrial design, engineering and computer science would be an optimal collaboration for the inevitable increase...

  17. Definition of technology development missions for early space station, orbit transfer vehicle servicing. Volume 1: Executive summary

    Science.gov (United States)

    1983-01-01

    Orbital Transfer Vehicle (OTV) servicing study scope, propellant transfer, storage and reliquefaction technology development missions (TDM), docking and berthing TDM, maintenance TDM, OTV/payload integration TDM, combined TDMS design, summary space station accomodations, programmatic analysis, and TDM equipment operational usage are discussed.

  18. Preliminary Problem Definition Study on Munitions-Related Chemicals.

    Science.gov (United States)

    1979-04-01

    Thorium-230, Radium-226, Lead- 210 and Polonium - 210 by Plants," Radiat. Bot., 10(3), 293-295. Ernst, W. (1968), "Ecological Studies on Plants Grown on...dechlorane in the environment and its bioconcentration and biomagnifica- tion through the food chain. In mammals, dechlorane has been shown to be tei-atogenic...08 5. Phytotoxicity .o......................208 *6. Environmental Fate ....................... 210 7. Availability of Literature for

  19. Isotope effects: definitions and consequences for pharmacologic studies

    International Nuclear Information System (INIS)

    Van Langenhove, A.

    1986-01-01

    The use of stable isotope-labeled compounds for pharmacologic studies requires careful consideration of the nature of the stable isotope label (2H, 13C, 15N, 18O) and its position of incorporation in the molecule. When deuterium is used, improper positioning can lead to significant primary isotope effects. Primary isotope effects occur when the breaking of the bond to the heavy isotope is the rate-limiting step in a reaction (or metabolic transformation). A reaction will proceed slower for the molecule with the heavy isotope label because of the mass difference between the light and the heavy isotope. In addition to these primary isotope effects, smaller but nevertheless important secondary isotope effects, physicochemical isotope effects, active hydrogen/deuterium exchange, or isotope effects associated with either the enzyme-catalyzed biotransformation or the mass spectrometric ionization and fragmentation can be operative. In mechanistic studies, isotope effects are used to their advantage; however, in pharmacokinetic studies, the occurrence of isotope effects can lead to grossly misleading biologic and analytic results: the metabolism of the drug will differ when in vivo isotope effects are operative, and isotope effects occurring during the analysis procedure will obscure the true metabolic profile of the drug

  20. Interfacing Lab-on-a-Chip Embryo Technology with High-Definition Imaging Cytometry.

    Science.gov (United States)

    Zhu, Feng; Hall, Christopher J; Crosier, Philip S; Wlodkowic, Donald

    2015-08-01

    To spearhead deployment of zebrafish embryo biotests in large-scale drug discovery studies, automated platforms are needed to integrate embryo in-test positioning and immobilization (suitable for high-content imaging) with fluidic modules for continuous drug and medium delivery under microperfusion to developing embryos. In this work, we present an innovative design of a high-throughput three-dimensional (3D) microfluidic chip-based device for automated immobilization and culture and time-lapse imaging of developing zebrafish embryos under continuous microperfusion. The 3D Lab-on-a-Chip array was fabricated in poly(methyl methacrylate) (PMMA) transparent thermoplastic using infrared laser micromachining, while the off-chip interfaces were fabricated using additive manufacturing processes (fused deposition modelling and stereolithography). The system's design facilitated rapid loading and immobilization of a large number of embryos in predefined clusters of traps during continuous microperfusion of drugs/toxins. It was conceptually designed to seamlessly interface with both upright and inverted fluorescent imaging systems and also to directly interface with conventional microtiter plate readers that accept 96-well plates. Compared with the conventional Petri dish assays, the chip-based bioassay was much more convenient and efficient as only small amounts of drug solutions were required for the whole perfusion system running continuously over 72 h. Embryos were spatially separated in the traps that assisted tracing single embryos, preventing interembryo contamination and improving imaging accessibility.

  1. 34 CFR 660.4 - What definitions apply to the International Research and Studies Program?

    Science.gov (United States)

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What definitions apply to the International Research and Studies Program? 660.4 Section 660.4 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION THE INTERNATIONAL RESEARCH...

  2. Solar power satellite system definition study. Volume 7, phase 1: SPS and rectenna systems analyses

    Science.gov (United States)

    1979-01-01

    A systems definition study of the solar power satellite systems is presented. The design and power distribution of the rectenna system is discussed. The communication subsystem and thermal control characteristics are described and a failure analysis performed on the systems is reported.

  3. A comparative study on the elastic modulus of polyvinyl alcohol sponge using different stress-strain definitions.

    Science.gov (United States)

    Karimi, Alireza; Navidbakhsh, Mahdi; Alizadeh, Mansour; Razaghi, Reza

    2014-10-01

    There have been different stress-strain definitions to measure the elastic modulus of spongy materials, especially polyvinyl alcohol (PVA) sponge. However, there is no agreement as to which stress-strain definition should be implemented. This study was aimed to show how different results are given by the various definitions of stress-strain used, and to recommend a specific definition when testing spongy materials. A fabricated PVA sponge was subjected to a series of tensile tests in order to measure its mechanical properties. Three stress definitions (second Piola-Kichhoff stress, engineering stress, and true stress) and four strain definitions (Almansi-Hamel strain, Green-St. Venant strain, engineering strain, and true strain) were used to determine the elastic modulus. The results revealed that the Almansi-Hamel strain definition exhibited the highest non-linear stress-strain relation and, as a result, may overestimate the elastic modulus at different stress definitions (second Piola-Kichhoff stress, engineering stress, and true stress). The Green-St. Venant strain definition failed to address the non-linear stress-strain relation using different definitions of stress and invoked an underestimation of the elastic modulus values. Engineering stress and strain definitions were only valid for small strains and displacements, which make them impractical when analyzing spongy materials. The results showed that the effect of varying the stress definition on the maximum stress measurements was significant but not when calculating the elastic modulus. It is important to consider which stress-strain definition is employed when characterizing the mechanical properties of spongy materials. Although the true stress-true strain definition exhibits a non-linear relation, we favor it in spongy materials mechanics as it gives more accurate measurements of the material's response using the instantaneous values.

  4. Study on underwater plasma arc cutting technology

    International Nuclear Information System (INIS)

    Yada, Toshio; Nakamura, Uhachiro; Tomidokoro, Sakae; Fukuzawa, Mitsuo

    1980-01-01

    The zirconium alloy tube of the impile creep test facility had been subjected to inner pressure in the Japan Material Testing Reactor (JMTR) environment. In the near future, it will be necessary to dismantle the facility and to take out the tube for such examinations as irradiation effects on material properties. In order to establish the dismantling technology for the radioactive facility, a study on underwater plasma arc cutting has been carried out since 1977. Primarily, optimum underwater cutting sequence and conditions were studied in details for developing the remote control handling and the cutting system. Further, the amounts of particles suspended in water as well as those contained in bubbled gas were quantitatively analyzed for developing a safe removal system for contaminants which were produced by cutting the radioactive material. As a result of this study, it has been concluded that the underwater plasma arc cutting method is generally suitable and effective for dismantling such radioactive material as the impile creep test facility of the JMTR. (author)

  5. Ports: Definition and study of types, sizes and business models

    Directory of Open Access Journals (Sweden)

    Ivan Roa

    2013-09-01

    Full Text Available Purpose: In the world today there are thousands of port facilities of different types and sizes, competing to capture some market share of freight by sea, mainly. This article aims to determine the type of port and the most common size, in order to find out which business model is applied in that segment and what is the legal status of the companies of such infrastructure.Design/methodology/approach: To achieve this goal, we develop a research on a representative sample of 800 ports worldwide, which manage 90% of the containerized port loading. Then you can find out the legal status of the companies that manage them.Findings: The results indicate a port type and a dominant size, which are mostly managed by companies subject to a concession model.Research limitations/implications: In this research, we study only those ports that handle freight (basically containerized, ignoring other activities such as fishing, military, tourism or recreational.Originality/value: This is an investigation to show that the vast majority of the studied segment port facilities are governed by a similar corporate model and subject to pressure from the markets, which increasingly demand efficiency and service. Consequently, we tend to concession terminals to private operators in a process that might be called privatization, but in the strictest sense of the term, is not entirely realistic because the ownership of the land never ceases to be public

  6. Study of high-definition and stereoscopic head-aimed vision for improved teleoperation of an unmanned ground vehicle

    Science.gov (United States)

    Tyczka, Dale R.; Wright, Robert; Janiszewski, Brian; Chatten, Martha Jane; Bowen, Thomas A.; Skibba, Brian

    2012-06-01

    Nearly all explosive ordnance disposal robots in use today employ monoscopic standard-definition video cameras to relay live imagery from the robot to the operator. With this approach, operators must rely on shadows and other monoscopic depth cues in order to judge distances and object depths. Alternatively, they can contact an object with the robot's manipulator to determine its position, but that approach carries with it the risk of detonation from unintentionally disturbing the target or nearby objects. We recently completed a study in which high-definition (HD) and stereoscopic video cameras were used in addition to conventional standard-definition (SD) cameras in order to determine if higher resolutions and/or stereoscopic depth cues improve operators' overall performance of various unmanned ground vehicle (UGV) tasks. We also studied the effect that the different vision modes had on operator comfort. A total of six different head-aimed vision modes were used including normal-separation HD stereo, SD stereo, "micro" (reduced separation) SD stereo, HD mono, and SD mono (two types). In general, the study results support the expectation that higher resolution and stereoscopic vision aid UGV teleoperation, but the degree of improvement was found to depend on the specific task being performed; certain tasks derived notably more benefit from improved depth perception than others. This effort was sponsored by the Joint Ground Robotics Enterprise under Robotics Technology Consortium Agreement #69-200902 T01. Technical management was provided by the U.S. Air Force Research Laboratory's Robotics Research and Development Group at Tyndall AFB, Florida.

  7. Cooperation, Technology, and Performance: A Case Study.

    Science.gov (United States)

    Cavanagh, Thomas; Dickenson, Sabrina; Brandt, Suzanne

    1999-01-01

    Describes the CTP (Cooperation, Technology, and Performance) model and explains how it is used by the Department of Veterans Affairs-Veteran's Benefit Administration (VBA) for training. Discusses task analysis; computer-based training; cooperative-based learning environments; technology-based learning; performance-assessment methods; courseware…

  8. Studying Innovation Technologies in Modern Education

    Science.gov (United States)

    Stukalenko, Nina M.; Zhakhina, Bariya B.; Kukubaeva, Asiya K.; Smagulova, Nurgul K.; Kazhibaeva, Gulden K.

    2016-01-01

    In modern society, innovation technologies expand to almost every field of human activity, including such wide field as education. Due to integrating innovation technologies into the educational process practice, this phenomenon gained special significance within improvement and modernization of the established educational system. Currently, the…

  9. What's in a name? Developing definitions for common health technology assessment product types of the International Network of Agencies for Health Technology Assessment (inahta).

    Science.gov (United States)

    Merlin, Tracy; Tamblyn, David; Ellery, Benjamin

    2014-10-01

    A mapping exercise was undertaken to determine how HTA is being described and conducted across the International Network of Agencies for Health Technology Assessment (INAHTA), with the aim of harmonizing terminologies and approaches. Three progressive surveys were undertaken. In 2010, INAHTA agencies were asked to provide details on all of their HTA products. In 2013, additional information was sought on key methodological characteristics of five of the most common HTA product types. Subsequently, final agreement was sought on three proposed product types. Forty-five HTA agencies responded to at least one of the surveys. In 2010, twenty-one agencies reported publishing over seventy named HTA products. Core domains associated with full HTA reports were reported by a third of agencies but were labeled differently, so products were classified according to product type (n = 17). Agencies producing short, tailored products increased between 2010 and 2013, with the publication of rapid reviews doubling from 33 percent to 66 percent. In 2013, half of the agencies adapted their common HTA products from documents produced by other agencies. A consensus (>70 percent) was achieved on definitions for HTA reports, mini-HTAs, and rapid reviews. The product label for an HTA is not always indicative of its content. Terminology has, therefore, been agreed to make explicit the trade-off between rigor and timeliness in three common HTA product types. An INAHTA Product Type (IPT) Mark has been created to identify each of these. It is hoped this will further facilitate HTA adaptation between agencies and reduce duplication of effort.

  10. Two-Dimensional High Definition Versus Three-Dimensional Endoscopy in Endonasal Skull Base Surgery: A Comparative Preclinical Study.

    Science.gov (United States)

    Rampinelli, Vittorio; Doglietto, Francesco; Mattavelli, Davide; Qiu, Jimmy; Raffetti, Elena; Schreiber, Alberto; Villaret, Andrea Bolzoni; Kucharczyk, Walter; Donato, Francesco; Fontanella, Marco Maria; Nicolai, Piero

    2017-09-01

    Three-dimensional (3D) endoscopy has been recently introduced in endonasal skull base surgery. Only a relatively limited number of studies have compared it to 2-dimensional, high definition technology. The objective was to compare, in a preclinical setting for endonasal endoscopic surgery, the surgical maneuverability of 2-dimensional, high definition and 3D endoscopy. A group of 68 volunteers, novice and experienced surgeons, were asked to perform 2 tasks, namely simulating grasping and dissection surgical maneuvers, in a model of the nasal cavities. Time to complete the tasks was recorded. A questionnaire to investigate subjective feelings during tasks was filled by each participant. In 25 subjects, the surgeons' movements were continuously tracked by a magnetic-based neuronavigator coupled with dedicated software (ApproachViewer, part of GTx-UHN) and the recorded trajectories were analyzed by comparing jitter, sum of square differences, and funnel index. Total execution time was significantly lower with 3D technology (P < 0.05) in beginners and experts. Questionnaires showed that beginners preferred 3D endoscopy more frequently than experts. A minority (14%) of beginners experienced discomfort with 3D endoscopy. Analysis of jitter showed a trend toward increased effectiveness of surgical maneuvers with 3D endoscopy. Sum of square differences and funnel index analyses documented better values with 3D endoscopy in experts. In a preclinical setting for endonasal skull base surgery, 3D technology appears to confer an advantage in terms of time of execution and precision of surgical maneuvers. Copyright © 2017 Elsevier Inc. All rights reserved.

  11. 34 CFR 658.4 - What definitions apply to the Undergraduate International Studies and Foreign Language Program?

    Science.gov (United States)

    2010-07-01

    ... International Studies and Foreign Language Program? 658.4 Section 658.4 Education Regulations of the Offices of... UNDERGRADUATE INTERNATIONAL STUDIES AND FOREIGN LANGUAGE PROGRAM General § 658.4 What definitions apply to the Undergraduate International Studies and Foreign Language Program? The definitions in 34 CFR 655.4 apply to this...

  12. Project definition study for the National Biomedical Tracer Facility

    Energy Technology Data Exchange (ETDEWEB)

    Roozen, K.

    1995-02-15

    The University of Alabama at Birmingham (UAB) has conducted a study of the proposed National Biomedical Tracer Facility (NBTF). In collaboration with General Atomics, RUST International, Coleman Research Corporation (CRC), IsoMed, Ernst and Young and the advisory committees, they have examined the issues relevant to the NBTF in terms of facility design, operating philosophy, and a business plan. They have utilized resources within UAB, CRC and Chem-Nuclear to develop recommendations on environmental, safety and health issues. The Institute of Medicine Panel`s Report on Isotopes for Medicine and the Life Sciences took the results of prior workshops further in developing recommendations for the mission of the NBTF. The IOM panel recommends that the NBTF accelerator have the capacity to accelerate protons to 80 MeV and a minimum of 750 microamperes of current. The panel declined to recommend a cyclotron or a linac. They emphasized a clear focus on research and development for isotope production including target design, separation chemistry and generator development. The facility needs to emphasize education and training in its mission. The facility must focus on radionuclide production for the research and clinical communities. The formation of a public-private partnership resembling the TRIUMF-Nordion model was encouraged. An advisory panel should assist with the NBTF operations and prioritization.

  13. Project definition study for the National Biomedical Tracer Facility

    International Nuclear Information System (INIS)

    Roozen, K.

    1995-01-01

    The University of Alabama at Birmingham (UAB) has conducted a study of the proposed National Biomedical Tracer Facility (NBTF). In collaboration with General Atomics, RUST International, Coleman Research Corporation (CRC), IsoMed, Ernst and Young and the advisory committees, they have examined the issues relevant to the NBTF in terms of facility design, operating philosophy, and a business plan. They have utilized resources within UAB, CRC and Chem-Nuclear to develop recommendations on environmental, safety and health issues. The Institute of Medicine Panel's Report on Isotopes for Medicine and the Life Sciences took the results of prior workshops further in developing recommendations for the mission of the NBTF. The IOM panel recommends that the NBTF accelerator have the capacity to accelerate protons to 80 MeV and a minimum of 750 microamperes of current. The panel declined to recommend a cyclotron or a linac. They emphasized a clear focus on research and development for isotope production including target design, separation chemistry and generator development. The facility needs to emphasize education and training in its mission. The facility must focus on radionuclide production for the research and clinical communities. The formation of a public-private partnership resembling the TRIUMF-Nordion model was encouraged. An advisory panel should assist with the NBTF operations and prioritization

  14. The Need for a Definition of Big Data for Nursing Science: A Case Study of Disaster Preparedness

    Science.gov (United States)

    Wong, Ho Ting; Chiang, Vico Chung Lim; Choi, Kup Sze; Loke, Alice Yuen

    2016-01-01

    The rapid development of technology has made enormous volumes of data available and achievable anytime and anywhere around the world. Data scientists call this change a data era and have introduced the term “Big Data”, which has drawn the attention of nursing scholars. Nevertheless, the concept of Big Data is quite fuzzy and there is no agreement on its definition among researchers of different disciplines. Without a clear consensus on this issue, nursing scholars who are relatively new to the concept may consider Big Data to be merely a dataset of a bigger size. Having a suitable definition for nurse researchers in their context of research and practice is essential for the advancement of nursing research. In view of the need for a better understanding on what Big Data is, the aim in this paper is to explore and discuss the concept. Furthermore, an example of a Big Data research study on disaster nursing preparedness involving six million patient records is used for discussion. The example demonstrates that a Big Data analysis can be conducted from many more perspectives than would be possible in traditional sampling, and is superior to traditional sampling. Experience gained from the process of using Big Data in this study will shed light on future opportunities for conducting evidence-based nursing research to achieve competence in disaster nursing. PMID:27763525

  15. The Need for a Definition of Big Data for Nursing Science: A Case Study of Disaster Preparedness

    Directory of Open Access Journals (Sweden)

    Ho Ting Wong

    2016-10-01

    Full Text Available The rapid development of technology has made enormous volumes of data available and achievable anytime and anywhere around the world. Data scientists call this change a data era and have introduced the term “Big Data”, which has drawn the attention of nursing scholars. Nevertheless, the concept of Big Data is quite fuzzy and there is no agreement on its definition among researchers of different disciplines. Without a clear consensus on this issue, nursing scholars who are relatively new to the concept may consider Big Data to be merely a dataset of a bigger size. Having a suitable definition for nurse researchers in their context of research and practice is essential for the advancement of nursing research. In view of the need for a better understanding on what Big Data is, the aim in this paper is to explore and discuss the concept. Furthermore, an example of a Big Data research study on disaster nursing preparedness involving six million patient records is used for discussion. The example demonstrates that a Big Data analysis can be conducted from many more perspectives than would be possible in traditional sampling, and is superior to traditional sampling. Experience gained from the process of using Big Data in this study will shed light on future opportunities for conducting evidence-based nursing research to achieve competence in disaster nursing.

  16. The Need for a Definition of Big Data for Nursing Science: A Case Study of Disaster Preparedness.

    Science.gov (United States)

    Wong, Ho Ting; Chiang, Vico Chung Lim; Choi, Kup Sze; Loke, Alice Yuen

    2016-10-17

    The rapid development of technology has made enormous volumes of data available and achievable anytime and anywhere around the world. Data scientists call this change a data era and have introduced the term "Big Data", which has drawn the attention of nursing scholars. Nevertheless, the concept of Big Data is quite fuzzy and there is no agreement on its definition among researchers of different disciplines. Without a clear consensus on this issue, nursing scholars who are relatively new to the concept may consider Big Data to be merely a dataset of a bigger size. Having a suitable definition for nurse researchers in their context of research and practice is essential for the advancement of nursing research. In view of the need for a better understanding on what Big Data is, the aim in this paper is to explore and discuss the concept. Furthermore, an example of a Big Data research study on disaster nursing preparedness involving six million patient records is used for discussion. The example demonstrates that a Big Data analysis can be conducted from many more perspectives than would be possible in traditional sampling, and is superior to traditional sampling. Experience gained from the process of using Big Data in this study will shed light on future opportunities for conducting evidence-based nursing research to achieve competence in disaster nursing.

  17. Definitions of love in a sample of British women: an empirical study using Q methodology.

    Science.gov (United States)

    Watts, Simon; Stenner, Paul

    2014-09-01

    Social psychological research has increasingly acknowledged that any pretensions to a singular theory of love should be replaced with a concern about its affirmation and what people actually say and do in love's name. Lee's (1977) love styles research and Sternberg's (1995) theory of love as a story are prime examples. Despite traditional definitions of love in western cultures being dominated by feminine images and tales of gender difference, however, the personal definitions and experiences of women have received comparatively little empirical attention, particularly in recent years and despite some well-documented changes in their cultural circumstances. This study remedies that situation through presentation of a Q methodological study in which a convenience sample of 59 British women were asked to Q sort 54 single-word descriptors of love to define love as they had experienced it. Factor analysis of the resulting Q sorts revealed six distinct definitions of love, interpreted as 'attraction, passion & romance', 'unconditional love', 'sex & fun', 'friendship & spirituality', 'a permanent commitment', and 'separate people, separate lives'. The six definitions are then discussed in terms of their allegiance to traditionally feminine and/or masculine values and as a means of highlighting the changing face of Britain's relational culture. © 2013 The British Psychological Society.

  18. Networking and Information Technology Workforce Study: Final Report

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — This report presents the results of a study of the global Networking and Information Technology NIT workforce undertaken for the Networking and Information...

  19. Definition of a safe zone for antegrade lag screw fixation of fracture of posterior column of the acetabulum by 3D technology.

    Science.gov (United States)

    Feng, Xiaoreng; Zhang, Sheng; Luo, Qiang; Fang, Jintao; Lin, Chaowen; Leung, Frankie; Chen, Bin

    2016-03-01

    The objective of this study was to define a safe zone for antegrade lag screw fixation of fracture of posterior column of the acetabulum using a novel 3D technology. Pelvic CT data of 59 human subjects were obtained to reconstruct three-dimensional (3D) models. The transparency of 3D models was then downgraded along the axial perspective (the view perpendicular to the cross section of the posterior column axis) to find the largest translucent area. The outline of the largest translucent area was drawn on the iliac fossa. The line segments of OA, AB, OC, CD, the angles of OAB and OCD that delineate the safe zone (ABDC) were precisely measured. The resultant line segments OA, AB, OC, CD, and angles OAB and OCD were 28.46mm(13.15-44.97mm), 45.89mm (34.21-62.85mm), 36.34mm (18.68-55.56mm), 53.08mm (38.72-75.79mm), 37.44° (24.32-54.96°) and 55.78° (43.97-79.35°) respectively. This study demonstrates that computer-assisted 3D modelling techniques can aid in the precise definition of the safe zone for antegrade insertion of posterior column lag screws. A full-length lag screw can be inserted into the zone (ABDC), permitting a larger operational error. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Electro Thermal Chemical Gun Technology Study

    National Research Council Canada - National Science Library

    Diamond, P

    1999-01-01

    .... Michael Stroscio. Electro Thermal Chemical (ETC) gun technology refers to the use of plasma devices in place of traditional chemical ignitors to initiate the burning of high energy propellants in a controlled manner...

  1. Definitions of medication-overuse headache in population-based studies and their implications on prevalence estimates

    DEFF Research Database (Denmark)

    Westergaard, Maria L; Hansen, Ebba Holme; Glümer, Charlotte

    2014-01-01

    Case definitions of medication-overuse headache (MOH) in population-based research have changed over time. This study aims to review MOH prevalence reports with respect to these changes, and to propose a practical case definition for future studies based on the ICHD-3 beta....

  2. Analysis of risk factors for schizophrenia with two different case definitions: a nationwide register-based external validation study.

    Science.gov (United States)

    Sørensen, Holger J; Larsen, Janne T; Mors, Ole; Nordentoft, Merete; Mortensen, Preben B; Petersen, Liselotte

    2015-03-01

    Different case definitions of schizophrenia have been used in register based research. However, no previous study has externally validated two different case definitions of schizophrenia against a wide range of risk factors for schizophrenia. We investigated hazard ratios (HRs) for a wide range of risk factors for ICD-10 DCR schizophrenia using a nationwide Danish sample of 2,772,144 residents born in 1955-1997. We compared one contact only (OCO) (the case definition of schizophrenia used in Danish register based studies) with two or more contacts (TMC) (a case definition of at least 2 inpatient contacts with schizophrenia). During the follow-up, the OCO definition included 15,074 and the TMC 7562 cases; i.e. half as many. The TMC case definition appeared to select for a worse illness course. A wide range of risk factors were uniformly associated with both case definitions and only slightly higher risk estimates were found for the TMC definition. Choosing at least 2 inpatient contacts with schizophrenia (TMC) instead of the currently used case definition would result in almost similar risk estimates for many well-established risk factors. However, this would also introduce selection and include considerably fewer cases and reduce power of e.g. genetic studies based on register-diagnosed cases only. Copyright © 2015 Elsevier B.V. All rights reserved.

  3. Introduction to the study of solar technology

    Energy Technology Data Exchange (ETDEWEB)

    Touchais, M

    1979-01-01

    The conversion of solar energy to meet the world's energy requirements by means of solar technology is discussed as preface to an introductory course in solar technology. The significance of the energy crisis of 1973 to the development of alternative sources of energy, primarily solar, is considered, and the amount of recoverable solar energy incident on the earth is estimated to be able to supply the world's energy demand. The various means of solar energy conversion, including thermal, chemical in the form of hydrogen or methane, and direct or thermal electrical, are examined, and areas of these technologies requiring further experimental investigation are indicated. Solar technology is presented as the science of the artificial applications of solar energy, with mention of its associated disciplines, and the deficiencies of the solar technology developed prior to the energy crisis are exposed. Goals for contemporary instruction in solar technology are then derived, the introductory course is outlined, and bibliographic references are presented. Differences between the sources of solar and traditional energies are also discussed.

  4. An experimental study on the mechanical properties of rat brain tissue using different stress-strain definitions.

    Science.gov (United States)

    Karimi, Alireza; Navidbakhsh, Mahdi

    2014-07-01

    There are different stress-strain definitions to measure the mechanical properties of the brain tissue. However, there is no agreement as to which stress-strain definition should be employed to measure the mechanical properties of the brain tissue at both the longitudinal and circumferential directions. It is worth knowing that an optimize stress-strain definition of the brain tissue at different loading directions may have implications for neuronavigation and surgery simulation through haptic devices. This study is aimed to conduct a comparative study on different results are given by the various definitions of stress-strain and to recommend a specific definition when testing brain tissues. Prepared cylindrical samples are excised from the parietal lobes of rats' brains and experimentally tested by applying load on both the longitudinal and circumferential directions. Three stress definitions (second Piola-Kichhoff stress, engineering stress, and true stress) and four strain definitions (Almansi-Hamel strain, Green-St. Venant strain, engineering strain, and true strain) are used to determine the elastic modulus, maximum stress and strain. The highest non-linear stress-strain relation is observed for the Almansi-Hamel strain definition and it may overestimate the elastic modulus at different stress definitions at both the longitudinal and circumferential directions. The Green-St. Venant strain definition fails to address the non-linear stress-strain relation using different definitions of stress and triggers an underestimation of the elastic modulus. The results suggest the application of the true stress-true strain definition for characterization of the brain tissues mechanics since it gives more accurate measurements of the tissue's response using the instantaneous values.

  5. Acute respiratory infection case definitions for young children: a systematic review of community-based epidemiologic studies in South Asia.

    Science.gov (United States)

    Roth, Daniel E; Gaffey, Michelle F; Smith-Romero, Evelyn; Fitzpatrick, Tiffany; Morris, Shaun K

    2015-12-01

    To explore the variability in childhood acute respiratory infection case definitions for research in low-income settings where there is limited access to laboratory or radiologic investigations. We conducted a systematic review of community-based, longitudinal studies in South Asia published from January 1990 to August 2013, in which childhood acute respiratory infection outcomes were reported. Case definitions were classified by their label (e.g. pneumonia, acute lower respiratory infection) and clinical content 'signatures' (array of clinical features that would be always present, conditionally present or always absent among cases). Case definition heterogeneity was primarily assessed by the number of unique case definitions overall and by label. We also compared case definition-specific acute respiratory infection incidence rates for studies reporting incidence rates for multiple case definitions. In 56 eligible studies, we found 124 acute respiratory infection case definitions. Of 90 case definitions for which clinical content was explicitly defined, 66 (73%) were unique. There was a high degree of content heterogeneity among case definitions with the same label, and some content signatures were assigned multiple labels. Within studies for which incidence rates were reported for multiple case definitions, variation in content was always associated with a change in incidence rate, even when the content differed by a single clinical feature. There has been a wide variability in case definition label and content combinations to define acute upper and lower respiratory infections in children in community-based studies in South Asia over the past two decades. These inconsistencies have important implications for the synthesis and translation of knowledge regarding the prevention and treatment of childhood acute respiratory infection. © 2015 John Wiley & Sons Ltd.

  6. Application study of nuclear technologies for integration chemical, biological and radiological technology

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jae Kon; Han, M. H.; Kim, Y. H.; Yang, J. E.; Jung, K. S.; Cha, H. K.; Moon, J.; La, K. H

    2001-02-01

    The projects are suggested the method to maximize the technology and research results which are being carried out by KAERI on the nuclear field. The study presents 1)the technology to rapidly and accurately determine and the nature of contamination, 2) the technology to predict the spread of contaminant and the magnitude of damage, and 3) the expert-aided decision making technology to identify the optimum counter-measures. And the solutions are also suggested the application to military technology in Chemical, Biological and Radiation field. In addition, I hope this kind of cooperation model come to be the good case of military civilian research harmony to improve the national competition capability.

  7. Comparison of two methods for calculating the mean vascularization index of ovarian stroma on the basis of spatio-temporal image correlation high-definition flow technology.

    Science.gov (United States)

    Kudla, Marek J; Kandzia, Tomasz; Alcázar, Juan Luis

    2013-11-01

    The aim of our study was to determine the agreement between two different methods for calculating the mean vascularization index (VI) of ovarian stroma using spatio-temporal image correlation-high definition flow (STIC-HDF) technology. Stored 4-D STIC-HDF volume data for ovaries of 34 premenopausal women were assessed retrospectively. We calculated the mean VI from the VI values derived for each 3-D volume within the STIC sequence. Then, the examiner subjectively selected the two volumes with the highest and lowest color signals, respectively. We averaged these two values. Agreement between VI measurements was estimated by calculating intra-class correlation coefficients. The intra-class correlation coefficient for the VI was 0.999 (95% confidence interval: 0.999-1.000). The mean time needed to calculate the mean VI using the entire 4-D STIC sequence was significantly longer than the mean time needed to calculate the average value from the volumes with the highest and lowest color signals determined by the operator (p < 0001). We conclude that there is significant agreement between the two methods. Calculating the average VI from the highest and lowest values is less time consuming than calculating the mean VI from the complete STIC sequence. Copyright © 2013 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.

  8. Definition of 1992 Technology Aircraft Noise Levels and the Methodology for Assessing Airplane Noise Impact of Component Noise Reduction Concepts

    Science.gov (United States)

    Kumasaka, Henry A.; Martinez, Michael M.; Weir, Donald S.

    1996-01-01

    This report describes the methodology for assessing the impact of component noise reduction on total airplane system noise. The methodology is intended to be applied to the results of individual study elements of the NASA-Advanced Subsonic Technology (AST) Noise Reduction Program, which will address the development of noise reduction concepts for specific components. Program progress will be assessed in terms of noise reduction achieved, relative to baseline levels representative of 1992 technology airplane/engine design and performance. In this report, the 1992 technology reference levels are defined for assessment models based on four airplane sizes - an average business jet and three commercial transports: a small twin, a medium sized twin, and a large quad. Study results indicate that component changes defined as program final goals for nacelle treatment and engine/airframe source noise reduction would achieve from 6-7 EPNdB reduction of total airplane noise at FAR 36 Stage 3 noise certification conditions for all of the airplane noise assessment models.

  9. Stereo-Optic High Definition Imaging: A New Technology to Understand Bird and Bat Avoidance of Wind Turbines

    Energy Technology Data Exchange (ETDEWEB)

    Adams, Evan; Goodale, Wing; Burns, Steve; Dorr, Chirs; Duron, Melissa; Gilbert, Andrew; Moratz, Reinhard; Robinson, Mark

    2017-07-21

    There is a critical need to develop monitoring tools to track aerofauna (birds and bats) in three dimensions around wind turbines. New monitoring systems will reduce permitting uncertainty by increasing the understanding of how birds and bats are interacting with wind turbines, which will improve the accuracy of impact predictions. Biodiversity Research Institute (BRI), The University of Maine Orono School of Computing and Information Science (UMaine SCIS), HiDef Aerial Surveying Limited (HiDef), and SunEdison, Inc. (formerly First Wind) responded to this need by using stereo-optic cameras with near-infrared (nIR) technology to investigate new methods for documenting aerofauna behavior around wind turbines. The stereo-optic camera system used two synchronized high-definition video cameras with fisheye lenses and processing software that detected moving objects, which could be identified in post-processing. The stereo- optic imaging system offered the ability to extract 3-D position information from pairs of images captured from different viewpoints. Fisheye lenses allowed for a greater field of view, but required more complex image rectification to contend with fisheye distortion. The ability to obtain 3-D positions provided crucial data on the trajectory (speed and direction) of a target, which, when the technology is fully developed, will provide data on how animals are responding to and interacting with wind turbines. This project was focused on testing the performance of the camera system, improving video review processing time, advancing the 3-D tracking technology, and moving the system from Technology Readiness Level 4 to 5. To achieve these objectives, we determined the size and distance at which aerofauna (particularly eagles) could be detected and identified, created efficient data management systems, improved the video post-processing viewer, and attempted refinement of 3-D modeling with respect to fisheye lenses. The 29-megapixel camera system

  10. Cost effectiveness studies of environmental technologies: Volume 1

    International Nuclear Information System (INIS)

    Silva, E.M.; Booth, S.R.

    1994-02-01

    This paper examines cost effectiveness studies of environmental technologies including the following: (1) In Situ Air Stripping, (2) Surface Towed Ordinance Locator System, (3) Ditch Witch Horizontal Boring Technology, (4) Direct Sampling Ion Trap Mass Spectrometer, (5) In Situ Vitrification, (6) Site Characterization and Analysis Penetrometer System, (7) In Situ Bioremediation, and (8) SEAMIST Membrane System Technology

  11. Egyptian Children's Use of Technology: A Phenomenological Study

    Science.gov (United States)

    Morgan, Hani; Lee, Guang-Lea

    2017-01-01

    Although the use of technology can be very important for children younger than age 12 years, not all countries possess the financial resources to make digital resources widely available to students. Children can also use technology inappropriately. This study explores the consequences of exposure to different forms of technology on children. It…

  12. Technologies for the Study of Speech: Review and an Application

    Science.gov (United States)

    Babatsouli, Elena

    2015-01-01

    Technologies used for the study of speech are classified here into non-intrusive and intrusive. The paper informs on current non-intrusive technologies that are used for linguistic investigations of the speech signal, both phonological and phonetic. Providing a point of reference, the review covers existing technological advances in language…

  13. Experimental study on ceramic membrane technology for onboard oxygen generation

    OpenAIRE

    Jiang Dongsheng; Bu Xueqin; Sun Bing; Lin Guiping; Zhao Hongtao; Cai Yan; Fang Ling

    2016-01-01

    The ceramic membrane oxygen generation technology has advantages of high concentration of produced oxygen and potential nuclear and biochemical protection capability. The present paper studies the ceramic membrane technology for onboard oxygen generation. Comparisons are made to have knowledge of the effects of two kinds of ceramic membrane separation technologies on oxygen generation, namely electricity driven ceramic membrane separation oxygen generation technology (EDCMSOGT) and pressure d...

  14. Predictors of severity and outcome of global developmental delay without definitive etiologic yield: a prospective observational study

    OpenAIRE

    Thomaidis, Loretta; Zantopoulos, Georgios Zacharias; Fouzas, Sotirios; Mantagou, Lito; Bakoula, Chryssa; Konstantopoulos, Andreas

    2014-01-01

    Background Although several determinants of global developmental delay (GDD) have been recognized, a significant number of children remain without definitive etiologic diagnosis. The objective of this study was to assess the effect of various prenatal and perinatal factors on the severity and outcome of developmental delay without definitive etiologic yield. Methods From March 2008 to February 2010, 142 children with developmental quotient (DQ)

  15. Transport Network TechnologiesStudy and Testing

    DEFF Research Database (Denmark)

    Bozorgebrahimi, K.; Channegowda, M.; Colmenero, A.

    Following on from the theoretical research into Carrier Class Transport Network Technologies (CCTNTs) documented in DJ1.1.1, this report describes the extensive testing performed by JRA1 Task 1. The tests covered EoMPLS, Ethernet OAM, Synchronous Ethernet, PBB-TE, MPLS-TP, OTN and GMPLS...

  16. Pragmatic criteria of the definition of neonatal near miss: a comparative study.

    Science.gov (United States)

    Kale, Pauline Lorena; Jorge, Maria Helena Prado de Mello; Laurenti, Ruy; Fonseca, Sandra Costa; Silva, Kátia Silveira da

    2017-12-04

    The objective of this study was to test the validity of the pragmatic criteria of the definitions of neonatal near miss, extending them throughout the infant period, and to estimate the indicators of perinatal care in public maternity hospitals. A cohort of live births from six maternity hospitals in the municipalities of São Paulo, Niterói, and Rio de Janeiro, Brazil, was carried out in 2011. We carried out interviews and checked prenatal cards and medical records. We compared the pragmatic criteria (birth weight, gestational age, and 5' Apgar score) of the definitions of near miss of Pileggi et al., Pileggi-Castro et al., Souza et al., and Silva et al. We calculated sensitivity, specificity (gold standard: infant mortality), percentage of deaths among newborns with life-threatening conditions, and rates of near miss, mortality, and severe outcomes per 1,000 live births. A total 7,315 newborns were analyzed (completeness of information > 99%). The sensitivity of the definition of Pileggi-Castro et al. was higher, resulting in a higher number of cases of near miss, Souza et al. presented lower value, and Pileggi et al. and de Silva et al. presented intermediate values. There is an increase in sensitivity when the period goes from 0-6 to 0-27 days, and there is a decrease when it goes to 0-364 days. Specificities were high (≥ 97%) and above sensitivities (54% to 77%). One maternity hospital in São Paulo and one in Niterói presented, respectively, the lowest and highest rates of infant mortality, near miss, and frequency of births with life-threatening conditions, regardless of the definition. The definitions of near miss based exclusively on pragmatic criteria are valid and can be used for monitoring purposes. Based on the perinatal literature, the cutoff points adopted by Silva et al. were more appropriate. Periodic studies could apply a more complete definition, incorporating clinical, laboratory, and management criteria, including congenital anomalies

  17. The relation of metabolic syndrome according to five definitions to cardiovascular risk factors - a population-based study

    Directory of Open Access Journals (Sweden)

    Lai Ming-May

    2009-12-01

    Full Text Available Abstract Background Although National Cholesterol Education Program (NCEP, International Diabetes Federation (IDF, American Heart Association and National Heart, Lung and Blood Institute (AHA/NHLBI, World Health Organization (WHO, and the European Group for the Study of Insulin Resistance (EGIR definitions of metabolic syndrome (MetS have been commonly used by studies, little is known about agreement among these five definitions. We examined the agreement among these five definitions and explored their relationship with risk factors of cardiovascular disease in a Taiwan population. Methods A total of 1305 subjects aged 40 years and over in Taiwan were analyzed. Biomedical markers and anthropometric indices were measured. Agreement among definitions was determined by the kappa statistic. Logistic regression models were fit to estimate the odds of a high cardiovascular risk group for five definitions of MetS. Results The agreement among the NCEP, IDF, and AHA/NHLBI definitions was from substantial to very good, and agreement between the WHO and EGIR definitions was also substantial. All MetS definitions were significantly associated prevalence of microalbuminuria, elevated highly sensitive CRP (hs-CRP, and arterial stiffness only in women. In men, MetS by NCEP and AHA/NHLBI was associated with elevated level of hs-CRP and arterial stiffness. MetS by WHO and EGIR were significantly associated with microalbuminuria. And MetS by WHO was the only MetS definition that significantly associated with prevalence of arterial stiffness (OR: 2.75, 95% CI: 1.22-6.19. Conclusions The associations of these five definitions with cardiovascular risk factors were similar in women, and it was evident that the five definitions performed better in women than in men, with higher ORs observed in relation to arterial stiffness, elevated hs-CRP, and higher Framingham risk scores.

  18. Demonstrating and implementing innovative technologies: Case studies from the USDOE Office of Technology Development

    International Nuclear Information System (INIS)

    Brouns, T.M.; Koegler, K.J.; Mamiya, L.S.

    1995-02-01

    This paper describes elements of success for demonstration, evaluation, and transfer for deployment of innovative technologies for environmental restoration. They have been compiled from lessons learned through the US Department of Energy (DOE) Office of Technology Development's Volatile Organic Compounds in Arid Soil Integrated Demonstration (VOC-Arid ID). The success of the VOC-Arid ID program was determined by the rapid development demonstration, and transfer for deployment of technologies to operational sites that improve on safety, cost, and/or schedule of performance over baseline technologies. The VOC-Arid ID successfully fielded more than 25 innovative technology field demonstrations; several of the technologies demonstrated have been successfully transferred for deployment Field demonstration is a critical element in the successful transfer of innovative technologies into environmental restoration operations. The measures of success for technology demonstrations include conducting the demonstration in a safe and controlled environment and generating the appropriate information by which to evaluate the technology. However, field demonstrations alone do not guarantee successful transfer for deployment There are many key elements throughout the development and demonstration process that have a significant impact on the success of a technology. This paper presents key elements for a successful technology demonstration and transfer for deployment identified through the experiences of the VOC-Arid ID. Also, several case studies are provided as examples

  19. Cervicitis aetiology and case definition: a study in Australian women attending sexually transmitted infection clinics.

    Science.gov (United States)

    Lusk, M Josephine; Garden, Frances L; Rawlinson, William D; Naing, Zin W; Cumming, Robert G; Konecny, Pam

    2016-05-01

    Studies examining cervicitis aetiology and prevalence lack comparability due to varying criteria for cervicitis. We aimed to outline cervicitis associations and suggest a best case definition. A cross-sectional study of 558 women at three sexually transmitted infection clinics in Sydney, Australia, 2006-2010, examined pathogen and behavioural associations of cervicitis using three cervicitis definitions: 'microscopy' (>30 pmnl/hpf (polymorphonuclear leucocytes per high-powered field on cervical Gram stain)), 'cervical discharge' (yellow and/or mucopurulent cervical discharge) or 'micro+cervical discharge' (combined 'microscopy' and 'cervical discharge'). Chlamydia trachomatis (CT), Mycoplasma genitalium (MG), Trichomonas vaginalis (TV) and Neisseria gonorrhoeae (NG) had the strongest associations with cervicitis definitions 'micro+cervical discharge': CT adjusted prevalence ratio (APR)=2.13 (95% CI 1.38 to 3.30) p=0.0006, MG APR=2.21 (1.33 to 3.69) p=0.002, TV APR=2.37 (1.44 to 3.90) p=0.0007 NG PR=4.42 (3.79 to 5.15) pdefinitions with best clinical utility and pathogen prediction were 'cervical discharge' and 'micro+cervical discharge'. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  20. Space Station data system analysis/architecture study. Task 1: Functional requirements definition, DR-5

    Science.gov (United States)

    1985-01-01

    The initial task in the Space Station Data System (SSDS) Analysis/Architecture Study is the definition of the functional and key performance requirements for the SSDS. The SSDS is the set of hardware and software, both on the ground and in space, that provides the basic data management services for Space Station customers and systems. The primary purpose of the requirements development activity was to provide a coordinated, documented requirements set as a basis for the system definition of the SSDS and for other subsequent study activities. These requirements should also prove useful to other Space Station activities in that they provide an indication of the scope of the information services and systems that will be needed in the Space Station program. The major results of the requirements development task are as follows: (1) identification of a conceptual topology and architecture for the end-to-end Space Station Information Systems (SSIS); (2) development of a complete set of functional requirements and design drivers for the SSIS; (3) development of functional requirements and key performance requirements for the Space Station Data System (SSDS); and (4) definition of an operating concept for the SSIS. The operating concept was developed both from a Space Station payload customer and operator perspective in order to allow a requirements practicality assessment.

  1. Exploring Stakeholder Definitions within the Aerospace Industry: A Qualitative Case Study

    Science.gov (United States)

    Hebert, Jonathan R.

    A best practice in the discipline of project management is to identify all key project stakeholders prior to the execution of a project. When stakeholders are properly identified, they can be consulted to provide expert advice on project activities so that the project manager can ensure the project stays within the budget and schedule constraints. The problem addressed by this study is that managers fail to properly identify key project stakeholders when using stakeholder theory because there are multiple conflicting definitions for the term stakeholder. Poor stakeholder identification has been linked to multiple negative project outcomes such as budget and schedules overruns, and this problem is heightened in certain industries such as aerospace. The purpose of this qualitative study was to explore project managers' and project stakeholders' perceptions of how they define and use the term stakeholder within the aerospace industry. This qualitative exploratory single-case study had two embedded units of analysis: project managers and project stakeholders. Six aerospace project managers and five aerospace project stakeholders were purposively selected for this study. Data were collected through individual semi-structured interviews with both project managers and project stakeholders. All data were analyzed using Yin's (2011) five-phased cycle approach for qualitative research. The results indicated that the aerospace project managers and project stakeholder define the term stakeholder as "those who do the work of a company." The participants build upon this well-known concept by adding that, "a company should list specific job titles" that correspond to their company specific-stakeholder definition. Results also indicated that the definition of the term stakeholder is used when management is assigning human resources to a project to mitigate or control project risk. Results showed that project managers tended to include the customer in their stakeholder definitions

  2. High Definition Video Streaming Using H.264 Video Compression

    OpenAIRE

    Bechqito, Yassine

    2009-01-01

    This thesis presents high definition video streaming using H.264 codec implementation. The experiment carried out in this study was done for an offline streaming video but a model for live high definition streaming is introduced, as well. Prior to the actual experiment, this study describes digital media streaming. Also, the different technologies involved in video streaming are covered. These include streaming architecture and a brief overview on H.264 codec as well as high definition t...

  3. A case study of technology transfer: Cardiology

    Science.gov (United States)

    Schafer, G.

    1974-01-01

    Research advancements in cardiology instrumentation and techniques are summarized. Emphasis is placed upon the following techniques: (1) development of electrodes which show good skin compatibility and wearer comfort; (2) contourography - a real time display system for showing the results of EKGs; (3) detection of arteriosclerosis by digital computer processing of X-ray photos; (4) automated, noninvasive systems for blood pressure measurement; (5) ultrasonoscope - a noninvasive device for use in diagnosis of aortic, mitral, and tricuspid valve disease; and (6) rechargable cardiac pacemakers. The formation of a biomedical applications team which is an interdisciplinary team to bridge the gap between the developers and users of technology is described.

  4. Technology-Enhanced Mathematics Education for Creative Engineering Studies

    DEFF Research Database (Denmark)

    Triantafyllou, Eva; Timcenko, Olga

    2014-01-01

    This project explores the opportunities and challenges of integrating digital technologies in mathematics education in creative engineering studies. Students in such studies lack motivation and do not perceive the mathematics the same way as mathematics students do. Digital technologies offer new...... are conceptualized. Then, we are going to apply this field data in designing learning technologies, which will be introduced in university classrooms. The effect of this introduction will be evaluated through educational design experiments....

  5. Effectiveness of Subsidies in Technology Adoption: A Case Study Involving Reverse Osmosis (RO Membrane Technology

    Directory of Open Access Journals (Sweden)

    Nur Laili

    2016-12-01

    Full Text Available Adoption of new technologies is a process that involves technological learning and penetration of new products into the market. Within the process of new technologies adoption, government usually intervened by providing incentives, in order to support the technology adoption to be succeed. This paper examines the effectiveness of incentives for the sustainability of reverse osmosis (RO membrane technology adoption. The study conducted through single case study on SWRO installation in Mandangin Island, East Java, Indonesia. Results of case study indentify the existence of government incentive in the form of direct subsidies to decrease the price of clean water. Although successful in reducing the price of water, but effectiveness of the subsidy on the sustainability of SWRO is still low, which is operates only 30% in a year. Further analysis shows that these subsidies actually be counter-productive to the sustainability of SWRO installation.

  6. Institutional dynamics and technology legitimacy - A framework and a case study on biogas technology

    NARCIS (Netherlands)

    Markard, Jochen; Wirth, Steffen; Truffer, Bernhard

    2016-01-01

    Legitimacy is central for both novel and established technologies to mobilize the resources necessary for growth and survival. A loss of legitimacy, in turn, can have detrimental effects for an industry. In this paper, we study the rise and fall of technology legitimacy of agricultural biogas in

  7. Prehispanic goldwork technology study by PIXE analysis

    Energy Technology Data Exchange (ETDEWEB)

    Zucchiatti, Alessandro, E-mail: alessandro.zucchiatti@uam.es [Centro de Micro Análisis de Materiales, Universidad Autónoma de Madrid, Calle de Faraday 3, Madrid 28049 (Spain); Climent Font, Aurelio [Centro de Micro Análisis de Materiales, Universidad Autónoma de Madrid, Calle de Faraday 3, Madrid 28049 (Spain); Gutierrez Neira, Patricia Carolina; Perea, Alicia [Centro de Ciencias Humanas y Sociales, CSIC, Calle Albasanz 26-28, Madrid 28037 (Spain); Fernandez Esquivel, Patricia [Fundación Museos, Banco Central de Costa Rica, San José (Costa Rica); Rovira Llorens, Salvador [Museo Arqueológico Nacional, Calle Serrano 13, Madrid 28006 (Spain); Ruvalcaba Sil, José Luis [Instituto de Física, Universidad Nacional Autónoma de Mexico, Mexici DF 28006 (Mexico); Verde, Ana [Museo de América, Avda. de los Reyes Católicos 6, Madrid 28040 (Spain)

    2014-08-01

    Technological characterization of pre-Hispanic gold metallurgy has still a wide deficit of analytical data. A set of 103 pieces from the so called “Quimbaya’s treasure” (QT) and the “Costa Rica collection” (CRC) of the Museo de America of Madrid were submitted to IBA analysis (PIXE and RBS) at the CMAM in three phases and the metal composition was determined. Only in a limited number of cases, due to the dramatic erosion of the gilded layer, produced by abrasive cleaning methods applied after the discovery and before the seventies, it was possible to determine also the sequence of layers, which gives information on the manufacture technology and the type and purity of the metals. PIXE results are reported and discussed. Data show that the CRC objects have very high gold levels (>80% in weight) while the QT have a more variable composition with significant Cu levels associated to the so called Tumbaga-alloy. In the cases where polishing had a tolerable effect, PIXE (and RBS), point to depletion gilding as a standard finishing process in the Costa Rica production, resulting in a gold rich surface alloy, while the variable composition of the QT objects may well be linked to deliberate colour choice.

  8. International energy technology collaboration and climate change mitigation. Case study 1. Concentrating Solar Power Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Philibert, C. [Energy and Environment Division, International Energy Agency IEA, Paris (France)

    2004-07-01

    international collaboration by describing the globalisation of the economy and current efforts of technology collaboration and transfer. Finally, it considers various ways to strengthen international energy technology collaboration. This paper is one of six case-studies designed in an effort to provide practical insights on the role international technology collaboration could play to achieve the objectives of the UNFCCC. They will all consider the past achievements of international technology collaboration, and the role it could play in helping to develop and disseminate new technologies in the future: what worked, what did not work and why, and what lessons might be drawn from past experiences. Most case studies consider energy technologies that could help mitigate greenhouse gas emissions. A few others consider areas not directly related to greenhouse gas emissions but where international technology collaboration has proven particularly successful in the past. This case study reviews past and current experience in international collaboration in the field of concentrating solar technologies in order to identify lessons that may be relevant for more general climate-friendly technology collaboration. It presents concentrating solar technologies in their current status, recent achievements and development prospects. It analyses the present successes and failures of different forms of international collaboration in this field, and draws lessons for further elaboration of international technology collaboration in addressing climate change.

  9. When does a protein become an allergen? Searching for a dynamic definition based on most advanced technology tools.

    Science.gov (United States)

    Mari, A

    2008-07-01

    Since the early beginning of allergology as a science considerable efforts have been made by clinicians and researchers to identify and characterize allergic triggers as raw allergenic materials, allergenic sources and tissues, and more recently basic allergenic structures defined as molecules. The last 15-20 years have witnessed many centres focusing on the identification and characterization of allergenic molecules leading to an expanding wealth of knowledge. The need to organize this information leads to the most important question 'when does a protein become an allergen?' In this article, I try to address this question by reviewing a few basic concepts of the immunology of IgE-mediated diseases, reporting on the current diagnostic and epidemiological tools used for allergic disease studies and discussing the usefulness of novel biotechnology tools (i.e. proteomics and molecular biology approaches), information technology tools (i.e. Internet-based resources) and microtechnology tools (i.e. proteomic microarray for IgE testing on molecular allergens). A step-wise staging of the identification and characterization process, including bench, clinical and epidemiological aspects, is proposed, in order to classify allergenic molecules dynamically. This proposal reflects the application and use of all the new tools available from current technologies.

  10. Information Technology Diffusion: A Comparative Case Study of Intranet Adoption

    OpenAIRE

    Zolla, George A., Jr.

    1999-01-01

    This exploratory study identifies factors that influence the adoption and diffusion of intranet technology. A comparative case study of bipolar organizations is used to identify crucial implementation factors and create an innovation adoption model. A strategic approach for the adoption and diffusion of intranet technology is then presented.

  11. Biofuel Drying - Literature Study and Definitions, Concepts and Terms; Torkning av biobraensle - litteraturstudie samt definitioner, begrepp och termer

    Energy Technology Data Exchange (ETDEWEB)

    Sanati, Mehri; Faghihi, Mostafa

    2001-09-01

    The report contains one section with definitions and explications of terms in the field of drying of biofuels. The second section presents, in english, the result of a literature study in the same subject, based on 90 literature references.

  12. The quest for a universal definition of polytrauma: a trauma registry-based validation study.

    Science.gov (United States)

    Butcher, Nerida E; D'Este, Catherine; Balogh, Zsolt J

    2014-10-01

    A pilot validation recommended defining polytrauma as patients with an Abbreviated Injury Scale (AIS) score greater than 2 in at least two Injury Severity Score (ISS) body regions (2 × AIS score > 2). This study aimed to validate this definition on larger data set. We hypothesized that patients defined by the 2 × AIS score > 2 cutoff have worse outcomes and use more resources than those without 2 × AIS score > 2 and that this would therefore be a better definition of polytrauma. Patients injured between 2009 and 2011, with complete documentation of AIS by New South Wales Trauma Registry and 16 years and older were selected. Age and sex were obtained in addition to outcomes of ISS, hospital length of stay (LOS), intensive care unit (ICU) admission, ICU LOS, and mortality. We compared demographic characteristics and outcomes between patients with ISS greater than 15 who did and did not meet the 2 × AIS score > 2 definition. We then undertook regression analyses (logistic regression for binary outcomes [ICU admission and death] and linear regression for hospital and ICU LOS) to compare outcomes for patients with and without 2 × AIS score > 2, adjusting for sex and age categories. In the adjusted analyses, patients with 2 × AIS score > 2 had twice the odds of being admitted to the ICU compared with those without 2 × AIS score > 2 (odds ratio, 2.5; 95% confidence interval [CI], 2.2-2.8) and 1.7 times the odds of dying (95% CI, 1.4-2.0; p 2 also had a mean difference of 1.5 days longer stay in the hospital compared with those without 2 × AIS score > 2 (95% CI, 1.4-1.7) and 1.6 days longer ICU stay (95% CI, 1.4-1.8; p 2 had higher mortality, more frequent ICU admissions, and longer hospital and ICU stay than those without 2 × AIS score > 2 and represents a superior definition to the definitions for polytrauma currently in use. Diagnostic test/ criteria, level III.

  13. Study and application of construction technology of shielding concrete

    International Nuclear Information System (INIS)

    Wu Chongming; Ding Dexin; Chen Liangzhu; Zhao Jingfa; Li Shilong

    2008-01-01

    Process and techniques such as mixing,transportation and pouring have been studied. The construction technology for the shielding concrete with different densities has been summarized. The technology for the common concrete is quite different from that of shielding concrete, especially when its density is more than 4000 kg/m3. Application and practices have shown that different construction technologies shall be used for shielding concretes with different densities, and thus to ensure its uniformity and construction quality. (authors)

  14. Study on technology for minimizing radiation risk

    International Nuclear Information System (INIS)

    Lee, Jeong Ho; Kim, In Gyu; Kim, Jin Kyu; Lee, Kang Suk; Kim, Kug Chan; Chun, Ki Chung.

    1997-01-01

    Apoptosis, also called programmed cell death to discriminate it from necrosis, is characterized by : chromatin condensation, apoptotic body formation, fragmentation of DNA into oligonucleosome sized pieces, swelling and progressive cell degradation. We examined morphological and biochemical changes of T-lymphocytes following gamma irradiation exposure. The results are followings. 1) Murine lymphocytes have several characteristics : The irradiated cells undergo morphological and biochemical changes characteristic of apoptosis, causing growth delay. (0.01, 0.1, 1.0 Gy) 2) The onset of DNA fragmentation in cells occurs after one more cell divisions. 3) DNA fragmentation in cells occurs in all irradiated group (0.1, 1.0, 2.0, 4.0 Gy, 24 hours following gamma radiation exposure) 4) Apoptotic bodies were detected by confocal microscope with ease when compared with electron microscope. For the developing technology for minimizing radiation damage, the following experimental works have been done. 1) Establishment of experimental system for pre-screening of radioprotectants - Screening of protective substances using TSH bioindicator - Efficacy test of some radioprotective materials 2) TSH bioindicator system can make a scientific role in screening unknown materials for their possible radioprotective effect. (author). 42 refs., 3 tabs., 9 figs

  15. Study on technology for minimizing radiation risk

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jeong Ho; Kim, In Gyu; Kim, Jin Kyu; Lee, Kang Suk; Kim, Kug Chan; Chun, Ki Chung

    1997-01-01

    Apoptosis, also called programmed cell death to discriminate it from necrosis, is characterized by : chromatin condensation, apoptotic body formation, fragmentation of DNA into oligonucleosome sized pieces, swelling and progressive cell degradation. We examined morphological and biochemical changes of T-lymphocytes following gamma irradiation exposure. The results are followings. (1) Murine lymphocytes have several characteristics : The irradiated cells undergo morphological and biochemical changes characteristic of apoptosis, causing growth delay. (0.01, 0.1, 1.0 Gy) (2) The onset of DNA fragmentation in cells occurs after one more cell divisions. (3) DNA fragmentation in cells occurs in all irradiated group (0.1, 1.0, 2.0, 4.0 Gy, 24 hours following gamma radiation exposure) (4) Apoptotic bodies were detected by confocal microscope with ease when compared with electron microscope. For the developing technology for minimizing radiation damage, the following experimental works have been done. (1) Establishment of experimental system for pre-screening of radioprotectants - Screening of protective substances using TSH bioindicator - Efficacy test of some radioprotective materials (2) TSH bioindicator system can make a scientific role in screening unknown materials for their possible radioprotective effect. (author). 42 refs., 3 tabs., 9 figs.

  16. Fluoride ions vs removal technologies: A study

    Directory of Open Access Journals (Sweden)

    Jagvir Singh

    2016-11-01

    Full Text Available Literature reported that drinking water is a precious and scarce resource and it has to be protected and kept free from any kind of contamination. Further, it has to be used carefully without wasting. Literature also reported that fluoride bearing rocks are abundant in India, as a result, fluoride leaches out and contaminates the adjacent water and soil resources. A high concentration of fluoride ions in ground water increases up to more than 30 mg/L. This high concentration of fluoride ions causes many harmful and dangerous effects on our datum. Fluoride ions in larger quantities i.e. 20–80 mg/day taken over a period of 10–20 years result in crippling and skeletal fluorosis, severely damaging the bone. In the present scenario, there is a continuously increasing worldwide concern for the development of fluoride treatment technologies. Possibilities of reducing the high fluorine content in groundwater are by defluorination process/dilution with the surface water which is a very simple technique but the addition of Ca2+ ions to a solution in contact with fluorite when experimented in distilled water caused an appreciable decrease in fluoride concentration. In this review article, we emphasized the relationship between high concentrations of fluoride ions and their compounds and their health impact.

  17. Consensus on the Definition of Advanced Parkinson’s Disease: A Neurologists-Based Delphi Study (CEPA Study

    Directory of Open Access Journals (Sweden)

    Maria-Rosario Luquin

    2017-01-01

    Full Text Available To date, no consensus exists on the key factors for diagnosing advanced Parkinson disease (APD. To obtain consensus on the definition of APD, we performed a prospective, multicenter, Spanish nationwide, 3-round Delphi study (CEPA study. An ad hoc questionnaire was designed with 33 questions concerning the relevance of several clinical features for APD diagnosis. In the first-round, 240 neurologists of the Spanish Movement Disorders Group participated in the study. The results obtained were incorporated into the questionnaire and both, results and questionnaire, were sent out to and fulfilled by 26 experts in Movement Disorders. Review of results from the second-round led to a classification of symptoms as indicative of “definitive,” “probable,” and “possible” APD. This classification was confirmed by 149 previous participating neurologists in a third-round, where 92% completely or very much agreed with the classification. Definitive symptoms of APD included disability requiring help for the activities of daily living, presence of motor fluctuations with limitations to perform basic activities of daily living without help, severe dysphagia, recurrent falls, and dementia. These results will help neurologists to identify some key factors in APD diagnosis, thus allowing users to categorize the patients for a homogeneous recognition of this condition.

  18. University-to-industry advanced technology transfer. A case study

    Energy Technology Data Exchange (ETDEWEB)

    Goldhor, R S; Lung, R T

    1983-06-01

    This case study examines the events in the transfer of an advanced technology (a text-to-speech reading machine) from the university group that developed the technology to an industrial firm seeking to exploit the innovation. After a brief history of the six-year project, the paper discusses the roles of the participants, markets, and time and cost considerations. A model of technology transfer is presented and policy implications derived from the case are discussed. Emphasis is placed on the need for matching technical competence between donor and recipient, and on the function of a transfer agent in facilitating the social process of technology transfer. 42 references, 6 figures, 4 tables.

  19. Young adults, technology, and weight loss: a focus group study.

    Science.gov (United States)

    Stephens, Janna; Moscou-Jackson, Gyasi; Allen, Jerilyn K

    2015-01-01

    Overweight and obesity are a major concern in young adults. Technology has been integrated into many weight loss interventions; however little is known about the use of this technology in young adults. The purpose of this study was to explore through focus group sessions the opinions of young adults on the use of technology for weight loss. A total of 17 young adults, between 18 and 25 years of age, participated in three focus group sessions. Major results indicated that young adults have very little knowledge on the use of Smartphone technology for weight loss but would like to use this type of technology to help them lose weight. Results also indicated that young adults struggle to make healthy food choices and have priorities that outweigh exercise and they need support and guidance to make better decisions. In conclusion, young adults would be open to using Smartphone technology for weight loss but also need feedback and guidance to help make healthy decisions.

  20. DOE technology information management system database study report

    Energy Technology Data Exchange (ETDEWEB)

    Widing, M.A.; Blodgett, D.W.; Braun, M.D.; Jusko, M.J.; Keisler, J.M.; Love, R.J.; Robinson, G.L. [Argonne National Lab., IL (United States). Decision and Information Sciences Div.

    1994-11-01

    To support the missions of the US Department of Energy (DOE) Special Technologies Program, Argonne National Laboratory is defining the requirements for an automated software system that will search electronic databases on technology. This report examines the work done and results to date. Argonne studied existing commercial and government sources of technology databases in five general areas: on-line services, patent database sources, government sources, aerospace technology sources, and general technology sources. First, it conducted a preliminary investigation of these sources to obtain information on the content, cost, frequency of updates, and other aspects of their databases. The Laboratory then performed detailed examinations of at least one source in each area. On this basis, Argonne recommended which databases should be incorporated in DOE`s Technology Information Management System.

  1. Propulsion Study for Small Transport Aircraft Technology (STAT)

    Science.gov (United States)

    Gill, J. C.; Earle, R. V.; Staton, D. V.; Stolp, P. C.; Huelster, D. S.; Zolezzi, B. A.

    1980-01-01

    Propulsion requirements were determined for 0.5 and 0.7 Mach aircraft. Sensitivity studies were conducted on both these aircraft to determine parametrically the influence of propulsion characteristics on aircraft size and direct operating cost (DOC). Candidate technology elements and design features were identified and parametric studies conducted to select the STAT advanced engine cycle. Trade off studies were conducted to determine those advanced technologies and design features that would offer a reduction in DOC for operation of the STAT engines. These features were incorporated in the two STAT engines. A benefit assessment was conducted comparing the STAT engines to current technology engines of the same power and to 1985 derivatives of the current technology engines. Research and development programs were recommended as part of an overall technology development plan to ensure that full commercial development of the STAT engines could be initiated in 1988.

  2. Space Station Furnace Facility. Volume 1: Requirements definition and conceptual design study, executive summary

    Science.gov (United States)

    1992-05-01

    The Space Station Freedom Furnace (SSFF) Study was awarded on June 2, 1989, to Teledyne Brown Engineering (TBE) to define an advanced facility for materials research in the microgravity environment of Space Station Freedom (SSF). The SSFF will be designed for research in the solidification of metals and alloys, the crystal growth of electronic and electro-optical materials, and research in glasses and ceramics. The SSFF is one of the first 'facility' class payloads planned by the Microgravity Science and Applications Division (MSAD) of the Office of Space Science and Applications of NASA Headquarters. This facility is planned for early deployment during man-tended operations of the SSF with continuing operations through the Permanently Manned Configuration (PMC). The SSFF will be built around a general 'Core' facility which provides common support functions not provided by SSF, common subsystems which are best centralized, and common subsystems which are best distributed with each experiment module. The intent of the facility approach is to reduce the overall cost associated with implementing and operating a variety of experiments. This is achieved by reducing the launch mass and simplifying the hardware development and qualification processes associated with each experiment. The Core will remain on orbit and will require only periodic maintenance and upgrading while new Furnace Modules, samples, and consumables are developed, qualified, and transported to the SSF. The SSFF Study was divided into two phases: phase 1, a definition study phase, and phase 2, a design and development phase. The definition phase 1 is addressed. Phase 1 was divided into two parts. In the first part, the basic part of the effort, covered the preliminary definition and assessment of requirements; conceptual design of the SSFF; fabrication of mockups; and the preparation for and support of the Conceptual Design Review (CoDR). The second part, the option part, covered requirements update and

  3. Selling Technology in Technical Advertisements: A Case Study.

    Science.gov (United States)

    Guthrie, James R.

    1995-01-01

    Argues that, as the category of "technical products" has expanded and the public's enthusiasm for such products has lessened, marketing writers have begun to reconsider their approaches to technology in ads. Studies two technical ads in detail, and compares the ways in which they portray technology. (SR)

  4. Education Technology Services at Indiana University: A Case Study.

    Science.gov (United States)

    Bichelmeyer, B. A.; Hara, Noriko; Yi, Jessi; Dennen, Vanessa; Avers, Dale; Tzeng, Jeng-Yi

    1998-01-01

    This paper, based on a qualitative research study, describes the technology resources available in the Indiana University School of Education, explains the range of services provided by Education Technology Services (ETS), documents the organizational structure of ETS, and describes the key processes and culture of ETS. (Author/AEF)

  5. Adoption Study Of Seed Priming Technology In Upland Rice ...

    African Journals Online (AJOL)

    Adoption study was carried out during 2003 cropping season on randomly selected 83 farmers out of the 300 that participated in the upland rice seed priming technology transfer between year 2000 – 2002 to determine the impact of the technology on upland rice production in five States of Nigeria, through the use of ...

  6. The management approach to the NASA space station definition studies at the Manned Spacecraft Center

    Science.gov (United States)

    Heberlig, J. C.

    1972-01-01

    The overall management approach to the NASA Phase B definition studies for space stations, which were initiated in September 1969 and completed in July 1972, is reviewed with particular emphasis placed on the management approach used by the Manned Spacecraft Center. The internal working organizations of the Manned Spacecraft Center and its prime contractor, North American Rockwell, are delineated along with the interfacing techniques used for the joint Government and industry study. Working interfaces with other NASA centers, industry, and Government agencies are briefly highlighted. The controlling documentation for the study (such as guidelines and constraints, bibliography, and key personnel) is reviewed. The historical background and content of the experiment program prepared for use in this Phase B study are outlined and management concepts that may be considered for future programs are proposed.

  7. Planetary Science Technology Infusion Study: Findings and Recommendations Status

    Science.gov (United States)

    Anderson, David J.; Sandifer, Carl E., II; Sarver-Verhey, Timothy R.; Vento, Daniel M.; Zakrajsek, June F.

    2014-01-01

    The Planetary Science Division (PSD) within the National Aeronautics and Space Administrations (NASA) Science Mission Directorate (SMD) at NASA Headquarters sought to understand how to better realize a scientific return on spacecraft system technology investments currently being funded. In order to achieve this objective, a team at NASA Glenn Research Center was tasked with surveying the science and mission communities to collect their insight on technology infusion and additionally sought inputs from industry, universities, and other organizations involved with proposing for future PSD missions. This survey was undertaken by issuing a Request for Information (RFI) activity that requested input from the proposing community on present technology infusion efforts. The Technology Infusion Study was initiated in March 2013 with the release of the RFI request. The evaluation team compiled and assessed this input in order to provide PSD with recommendations on how to effectively infuse new spacecraft systems technologies that it develops into future competed missions enabling increased scientific discoveries, lower mission cost, or both. This team is comprised of personnel from the Radioisotope Power Systems (RPS) Program and the In-Space Propulsion Technology (ISPT) Program staff.The RFI survey covered two aspects of technology infusion: 1) General Insight, including: their assessment of barriers to technology infusion as related to infusion approach; technology readiness; information and documentation products; communication; integration considerations; interaction with technology development areas; cost-capped mission areas; risk considerations; system level impacts and implementation; and mission pull. 2) Specific technologies from the most recent PSD Announcements of Opportunities (AOs): The Advanced Stirling Radioisotope Generator (ASRG), aerocapture and aeroshell hardware technologies, the NASA Evolutionary Xenon Thruster (NEXT) ion propulsion system, and the

  8. Overlap of food addiction and substance use disorders definitions: analysis of animal and human studies.

    Science.gov (United States)

    Hone-Blanchet, Antoine; Fecteau, Shirley

    2014-10-01

    Food has both homeostatic and hedonic components, which makes it a potent natural reward. Food related reward could therefore promote an escalation of intake and trigger symptoms associated to withdrawal, suggesting a behavioral parallel with substance abuse. Animal and human theoretical models of food reward and addiction have emerged, raising further interrogations on the validity of a bond between Substance Use Disorders, as clinically categorized in the DSM 5, and food reward. These models propose that highly palatable food items, rich in sugar and/or fat, are overly stimulating to the brain's reward pathways. Moreover, studies have also investigated the possibility of causal link between food reward and the contemporary obesity epidemic, with obesity being potentiated and maintained due to this overwhelming food reward. Although natural rewards are a hot topic in the definition and categorization of Substance Use Disorders, proofs of concept and definite evidence are still inconclusive. This review focuses on available results from experimental studies in animal and human models exploring the concept of food addiction, in an effort to determine if it depicts a specific phenotype and if there is truly a neurobiological similarity between food addiction and Substance Use Disorders. It describes results from sugar, fat and sweet-fat bingeing in rodent models, and behavioral and neurobiological assessments in different human populations. Although pieces of behavioral and neurobiological evidence supporting a food addiction phenotype in animals and humans are interesting, it seems premature to conclude on its validity. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. A study on the nuclear technology policy

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Maeng Ho; Ham, C. H.; Kim, H. J.; Chung, W. S.; Lee, T. J.; Lee, B. O.; Yun, S. W.; Choi, Y. M.; Eom, T. Y

    1998-01-01

    This study analyzed the major issues as the research activities for the support of establishment and implementation of national policy. The analyses were focused on the recommendations of the responsive direction of national policy in positive and effective manners in accordance with the changes of international nuclear affairs. This study also analyzed the creation of environmental foundation for effective implementation of the national policy and national R and D investment such as securing national consensus and openings of policy information to the public. The major results of the role and position of nuclear policy, trends of nuclear policy and nuclear R and D activities of USA, France, Japan, Asian developing countries etc. and international trends of small- and medium-sized reactor as well as spin-offs of nuclear R and D activities, were analyzed. (author). 66 refs., 27 tabs., 15 figs

  10. A critical assessment of the Protoaurignacian lithic technology at Fumane Cave and its implications for the definition of the earliest Aurignacian.

    Science.gov (United States)

    Falcucci, Armando; Conard, Nicholas J; Peresani, Marco

    2017-01-01

    In the scenario of the spread of the anatomically modern humans (AMHs) into Europe, the techno-complex known as Protoaurignacian is defined by the production of blades and bladelets within a single and continuous stone knapping sequence from the same core as the result of its progressive reduction. However, the growing re-evaluation of some assemblages is revealing that bladelets are frequently obtained from independent reduction sequences, hence discouraging the direct application of the model developed in southwestern France. High-resolution regional signatures are thus needed to reconstruct a more accurate portrait of the AMH colonization dynamic. Northeastern Italy, with the key site of Fumane Cave, is one among the regions of Mediterranean Europe worthy of consideration for reconstructing this colonization process and its cultural dynamics. Within the framework of a critical discussion of the technological definition of the Protoaurignacian and its relationship with contemporaneous industries on a regional and supra-regional scale, we present the results of a detailed analysis of the lithic technology from units A2-A1 based on reduction sequence and attribute analyses. Results show that bladelets are the first goal of production and they do not originate from reduced blade cores but from a broad range of independent and simultaneous core reduction strategies. One implication is that the most commonly used technological trait that is said to define the Protoaurignacian has been over-emphasized and that the Protoaurignacian is technologically consistent across its geographical extent. Additional data based on carinated core technology imply that this techno-complex shares a common technological background with the Early Aurignacian and that no features are restricted to one of the two facies. Furthermore, the major difference between the Protoaurignacian and Early Aurignacian appears to be more typological in nature, with retouched bladelets being less common in

  11. A comparative study on export control systems of nuclear technology in ROK and USA

    Energy Technology Data Exchange (ETDEWEB)

    Tae, Jae Woong; Shin, Dong Hoon [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

    2013-10-15

    Perfect removal of transferred technology is impossible because it is impossible to find all copies of technologies such as files and documents. International community concerns about Terrorists' acquirement of nuclear technologies related to nuclear reactors, enrichment and reprocessing Facilities and heavy water production facilities, which can be used for production of nuclear weapons. Non-state actors as well as concerning countries have tried to possess nuclear technology for developing nuclear weapons. Non-state actors' activities threaten global nuclear security. Korea exported four nuclear power plants to UAE and a research reactor to Jordan. Non-state actors may try to procure nuclear equipment and technology from Korean nuclear industries. Therefore, the export control system should be enhanced for national nuclear security and safety. In this study, the export control system of Korea and the United States were compared concerning to nuclear technology. In summary, controlled activities related to nuclear technology are treated more variously and more diverse activities are controlled in the United States than In Korea. Catch-all control will lose its effectiveness without this. Related to the control of ITT (Intangible Technology Transfer), Korea and the United States are trying to amend the export control regulation. Both of them are trying to control intangible technology transfers effectively. Revised Foreign Trade Act in Korea is expected to introduce a more rigorous system of nuclear technology controls. It focuses on nationality rather than residence. The revised law may face into other problems such as dual nationals like as the United States. However, this satisfies legislative requirements for control of a deemed export. The revised law will enter into force in 2014. Accurate meanings of technology and export will be defined soon in the enforcement decree and the public notice before 2014. However, it is hard to revise the definition

  12. A comparative study on export control systems of nuclear technology in ROK and USA

    International Nuclear Information System (INIS)

    Tae, Jae Woong; Shin, Dong Hoon

    2013-01-01

    Perfect removal of transferred technology is impossible because it is impossible to find all copies of technologies such as files and documents. International community concerns about Terrorists' acquirement of nuclear technologies related to nuclear reactors, enrichment and reprocessing Facilities and heavy water production facilities, which can be used for production of nuclear weapons. Non-state actors as well as concerning countries have tried to possess nuclear technology for developing nuclear weapons. Non-state actors' activities threaten global nuclear security. Korea exported four nuclear power plants to UAE and a research reactor to Jordan. Non-state actors may try to procure nuclear equipment and technology from Korean nuclear industries. Therefore, the export control system should be enhanced for national nuclear security and safety. In this study, the export control system of Korea and the United States were compared concerning to nuclear technology. In summary, controlled activities related to nuclear technology are treated more variously and more diverse activities are controlled in the United States than In Korea. Catch-all control will lose its effectiveness without this. Related to the control of ITT (Intangible Technology Transfer), Korea and the United States are trying to amend the export control regulation. Both of them are trying to control intangible technology transfers effectively. Revised Foreign Trade Act in Korea is expected to introduce a more rigorous system of nuclear technology controls. It focuses on nationality rather than residence. The revised law may face into other problems such as dual nationals like as the United States. However, this satisfies legislative requirements for control of a deemed export. The revised law will enter into force in 2014. Accurate meanings of technology and export will be defined soon in the enforcement decree and the public notice before 2014. However, it is hard to revise the definition of export

  13. Study on commercial FBR concepts by combining innovative technologies

    International Nuclear Information System (INIS)

    Miura, M.; Inagaki, T.; Kuroha, M.; Hida, T.

    1992-01-01

    A study was conducted on future prospects of FBR commercialization. Targets of further improving safety and economy were set to make commercial power plants that would be superior to future LWRs. Promising innovative technologies studied domestically and overseas were extracted by evaluating prospects for commercialization, effect, and plant applicability. Several commercial plants were conceptualized by introducing such technology to large-scale and oxide-fuel reactors. Estimates of construction cost, etc., proved that the targets could be achieved. A concept of long-term technological development was synthesized. (author)

  14. Cognitive Aids for Role Definition (CARD) to improve interprofessional team crisis resource management: An exploratory study.

    Science.gov (United States)

    Renna, Tania Di; Crooks, Simone; Pigford, Ashlee-Ann; Clarkin, Chantalle; Fraser, Amy B; Bunting, Alexandra C; Bould, M Dylan; Boet, Sylvain

    2016-09-01

    This study aimed to assess the perceived value of the Cognitive Aids for Role Definition (CARD) protocol for simulated intraoperative cardiac arrests. Sixteen interprofessional operating room teams completed three consecutive simulated intraoperative cardiac arrest scenarios: current standard, no CARD; CARD, no CARD teaching; and CARD, didactic teaching. Each team participated in a focus group interview immediately following the third scenario; data were transcribed verbatim and qualitatively analysed. After 6 months, participants formed eight new teams randomised to two groups (CARD or no CARD) and completed a retention intraoperative cardiac arrest simulation scenario. All simulation sessions were video recorded and expert raters assessed team performance. Qualitative analysis of the 16 focus group interviews revealed 3 thematic dimensions: role definition in crisis management; logistical issues; and the "real life" applicability of CARD. Members of the interprofessional team perceived CARD very positively. Exploratory quantitative analysis found no significant differences in team performance with or without CARD (p > 0.05). In conclusion, qualitative data suggest that the CARD protocol clarifies roles and team coordination during interprofessional crisis management and has the potential to improve the team performance. The concept of a self-organising team with defined roles is promising for patient safety.

  15. Energy and cost saving results for advanced technology systems from the Cogeneration Technology Alternatives Study (CTAS)

    Science.gov (United States)

    Sagerman, G. D.; Barna, G. J.; Burns, R. K.

    1979-01-01

    An overview of the organization and methodology of the Cogeneration Technology Alternatives Study is presented. The objectives of the study were to identify the most attractive advanced energy conversion systems for industrial cogeneration applications in the future and to assess the advantages of advanced technology systems compared to those systems commercially available today. Advanced systems studied include steam turbines, open and closed cycle gas turbines, combined cycles, diesel engines, Stirling engines, phosphoric acid and molten carbonate fuel cells and thermionics. Steam turbines, open cycle gas turbines, combined cycles, and diesel engines were also analyzed in versions typical of today's commercially available technology to provide a base against which to measure the advanced systems. Cogeneration applications in the major energy consuming manufacturing industries were considered. Results of the study in terms of plant level energy savings, annual energy cost savings and economic attractiveness are presented for the various energy conversion systems considered.

  16. Experimental study on ceramic membrane technology for onboard oxygen generation

    Directory of Open Access Journals (Sweden)

    Jiang Dongsheng

    2016-08-01

    Full Text Available The ceramic membrane oxygen generation technology has advantages of high concentration of produced oxygen and potential nuclear and biochemical protection capability. The present paper studies the ceramic membrane technology for onboard oxygen generation. Comparisons are made to have knowledge of the effects of two kinds of ceramic membrane separation technologies on oxygen generation, namely electricity driven ceramic membrane separation oxygen generation technology (EDCMSOGT and pressure driven ceramic membrane separation oxygen generation technology (PDCMSOGT. Experiments were conducted under different temperatures, pressures of feed air and produced oxygen flow rates. On the basis of these experiments, the flow rate of feed air, electric power provided, oxygen recovery rate and concentration of produced oxygen are compared under each working condition. It is concluded that the EDCMSOGT is the oxygen generation means more suitable for onboard conditions.

  17. Lower extremity revascularization using directional atherectomy: 12-month prospective results of the DEFINITIVE LE study.

    Science.gov (United States)

    McKinsey, James F; Zeller, Thomas; Rocha-Singh, Krishna J; Jaff, Michael R; Garcia, Lawrence A

    2014-08-01

    The aim of this study was to assess the safety and effectiveness of directional atherectomy (DA) for endovascular treatment of peripheral arterial disease (PAD) in infrainguinal arteries in patients with claudication or critical limb ischemia. To date, no prospective, multicenter, independently-adjudicated study has evaluated the effectiveness and durability of DA in the treatment of PAD. Previous DA studies have not been prospectively powered to evaluate any differences in outcomes in patients with and without diabetes. DEFINITIVE LE (Determination of EFfectiveness of the SilverHawk(®) PerIpheral Plaque ExcisioN System (SIlverHawk Device) for the Treatment of Infrainguinal VEssels / Lower Extremities) prospectively enrolled subjects at 47 multinational centers with an infrainguinal lesion length up to 20 cm. Primary endpoints were defined as primary patency at 12 months for claudicants and freedom from major unplanned amputation for critical limb ischemia (CLI) subjects. A pre-specified statistical hypothesis evaluated noninferiority of primary patency in diabetic versus nondiabetic claudicants. Independent angiographic and sonographic core laboratories assessed outcomes, and events were adjudicated by a clinical events committee. A total of 800 subjects were enrolled. The 12-month primary patency was 78% (95% confidence interval: 74.0% to 80.6%) in claudicants, with a 77% rate in the diabetic subgroup versus 78% in the nondiabetic subgroup (noninferior, p < 0.001). The rate of freedom from major unplanned amputation of the target limb at 12 months in CLI subjects was 95% (95% confidence interval: 90.7% to 97.4%). Periprocedural adverse events included embolization (3.8%), perforation (5.3%), and abrupt closure (2.0%). The bail-out stent rate was 3.2%. The DEFINITIVE LE study demonstrated that DA is a safe and effective treatment modality at 12 months for a diverse patient population with either claudication or CLI. Furthermore, DA was shown to be noninferior for

  18. Physical disease and resilient outcomes: a systematic review of resilience definitions and study methods.

    Science.gov (United States)

    Johnston, Marjorie C; Porteous, Terry; Crilly, Michael A; Burton, Christopher D; Elliott, Alison; Iversen, Lisa; McArdle, Karen; Murray, Alison; Phillips, Louise H; Black, Corri

    2015-01-01

    Findings from physical disease resilience research may be used to develop approaches to reduce the burden of disease. However, there is no consensus on the definition and measurement of resilience in the context of physical disease. The aim was to summarize the range of definitions of physical disease resilience and the approaches taken to study it in studies examining physical disease and its relationship to resilient outcomes. Electronic databases were searched from inception to March 2013 for studies in which physical disease was assessed for its association with resilient outcomes. Article screening, data extraction, and quality assessment were carried out independently by 2 reviewers, with disagreements being resolved by a third reviewer. The results were combined using a narrative technique. Of 2280 articles, 12 met the inclusion criteria. Of these studies, 1 was of high quality, 9 were of moderate quality, and 2 were low quality. The common findings were that resilience involves maintaining healthy levels of functioning following adversity and that it is a dynamic process not a personality trait. Studies either assessed resilience based on observed outcomes or via resilience measurement scales. They either considered physical disease as an adversity leading to resilience or as a variable modifying the relationship between adversity and resilience. This work begins building consensus as to the approach to take when defining and measuring physical disease resilience. Resilience should be considered as a dynamic process that varies across the life-course and across different domains, therefore the choice of a resilience measure should reflect this. Copyright © 2015 The Academy of Psychosomatic Medicine. Published by Elsevier Inc. All rights reserved.

  19. Chronic Fatigue Syndrome – A clinically empirical approach to its definition and study

    Directory of Open Access Journals (Sweden)

    Papanicolaou Dimitris A

    2005-12-01

    Full Text Available Abstract Background The lack of standardized criteria for defining chronic fatigue syndrome (CFS has constrained research. The objective of this study was to apply the 1994 CFS criteria by standardized reproducible criteria. Methods This population-based case control study enrolled 227 adults identified from the population of Wichita with: (1 CFS (n = 58; (2 non-fatigued controls matched to CFS on sex, race, age and body mass index (n = 55; (3 persons with medically unexplained fatigue not CFS, which we term ISF (n = 59; (4 CFS accompanied by melancholic depression (n = 27; and (5 ISF plus melancholic depression (n = 28. Participants were admitted to a hospital for two days and underwent medical history and physical examination, the Diagnostic Interview Schedule, and laboratory testing to identify medical and psychiatric conditions exclusionary for CFS. Illness classification at the time of the clinical study utilized two algorithms: (1 the same criteria as in the surveillance study; (2 a standardized clinically empirical algorithm based on quantitative assessment of the major domains of CFS (impairment, fatigue, and accompanying symptoms. Results One hundred and sixty-four participants had no exclusionary conditions at the time of this study. Clinically empirical classification identified 43 subjects as CFS, 57 as ISF, and 64 as not ill. There was minimal association between the empirical classification and classification by the surveillance criteria. Subjects empirically classified as CFS had significantly worse impairment (evaluated by the SF-36, more severe fatigue (documented by the multidimensional fatigue inventory, more frequent and severe accompanying symptoms than those with ISF, who in turn had significantly worse scores than the not ill; this was not true for classification by the surveillance algorithm. Conclusion The empirical definition includes all aspects of CFS specified in the 1994 case definition and identifies persons with

  20. Cost studies of thermally enhanced in situ soil remediation technologies

    International Nuclear Information System (INIS)

    Bremser, J.; Booth, S.R.

    1996-05-01

    This report describes five thermally enhanced technologies that may be used to remediate contaminated soil and water resources. The standard methods of treating these contaminated areas are Soil Vapor Extraction (SVE), Excavate ampersand Treat (E ampersand T), and Pump ampersand Treat (P ampersand T). Depending on the conditions at a given site, one or more of these conventional alternatives may be employed; however, several new thermally enhanced technologies for soil decontamination are emerging. These technologies are still in demonstration programs which generally are showing great success at achieving the expected remediation results. The cost savings reported in this work assume that the technologies will ultimately perform as anticipated by their developers in a normal environmental restoration work environment. The five technologies analyzed in this report are Low Frequency Heating (LF or Ohmic, both 3 and 6 phase AC), Dynamic Underground Stripping (DUS), Radio Frequency Heating (RF), Radio Frequency Heating using Dipole Antennae (RFD), and Thermally Enhanced Vapor Extraction System (TEVES). In all of these technologies the introduction of heat to the formation raises vapor pressures accelerating contaminant evaporation rates and increases soil permeability raising diffusion rates of contaminants. The physical process enhancements resulting from temperature elevations permit a greater percentage of volatile organic compound (VOC) or semi- volatile organic compound (SVOC) contaminants to be driven out of the soils for treatment or capture in a much shorter time period. This report presents the results of cost-comparative studies between these new thermally enhanced technologies and the conventional technologies, as applied to five specific scenarios

  1. Longitudinal Study: Efficacy of Online Technology Tools for Instructional Use

    Science.gov (United States)

    Uenking, Michael D.

    2011-01-01

    Studies show that the student population (secondary and post secondary) is becoming increasingly more technologically savvy. Use of the internet, computers, MP3 players, and other technologies along with online gaming has increased tremendously amongst this population such that it is creating an apparent paradigm shift in the learning modalities of these students. Instructors and facilitators of learning can no longer rely solely on traditional lecture-based lesson formals. In order to achieve student academic success and satisfaction and to increase student retention, instructors must embrace various technology tools that are available and employ them in their lessons. A longitudinal study (January 2009-June 2010) has been performed that encompasses the use of several technology tools in an instructional setting. The study provides further evidence that students not only like the tools that are being used, but prefer that these tools be used to help supplement and enhance instruction.

  2. The Smithsonian Earth Physics Satellite (SEPS) definition study, volumes 1 through 4

    Science.gov (United States)

    1971-01-01

    A limited Phase B study was undertaken to determine the merit and feasibility of launching a proposed earth physics satellite with Apollo-type hardware. The study revealed that it would be feasible to launch this satellite using a S-IB stage, a S-IVB with restart capability, an instrument unit, a SLA for the satellite shroud, and a nose cone (AS-204 configuration). A definition of the proposed satellite is provided, which is specifically designed to satisfy the fundamental requirement of providing an orbiting benchmark of maximum accuracy. The satellite is a completely passive, solid 3628-kg sphere of 38.1-cm radius and very high mass-to-area ratio (7980 kg sq mi). In the suggested orbit of 55 degrees inclination, 3720 km altitude, and low eccentricity, the orbital lifetime is extremely long, so many decades of operation can be expected.

  3. Technology teachers as researchers : philosophical and empirical technology education studies in the Swedish TUFF Research School

    NARCIS (Netherlands)

    Skogh, I.B.; Vries, de M.J.

    2013-01-01

    This book presents the scientific output of the TUFF research school in Sweden. In this school, a group of active teachers worked together on a series of educational research studies. All of those studies were related to the teaching about technology and engineering. The research program consisted

  4. GACT: a Genome build and Allele definition Conversion Tool for SNP imputation and meta-analysis in genetic association studies.

    Science.gov (United States)

    Sulovari, Arvis; Li, Dawei

    2014-07-19

    Genome-wide association studies (GWAS) have successfully identified genes associated with complex human diseases. Although much of the heritability remains unexplained, combining single nucleotide polymorphism (SNP) genotypes from multiple studies for meta-analysis will increase the statistical power to identify new disease-associated variants. Meta-analysis requires same allele definition (nomenclature) and genome build among individual studies. Similarly, imputation, commonly-used prior to meta-analysis, requires the same consistency. However, the genotypes from various GWAS are generated using different genotyping platforms, arrays or SNP-calling approaches, resulting in use of different genome builds and allele definitions. Incorrect assumptions of identical allele definition among combined GWAS lead to a large portion of discarded genotypes or incorrect association findings. There is no published tool that predicts and converts among all major allele definitions. In this study, we have developed a tool, GACT, which stands for Genome build and Allele definition Conversion Tool, that predicts and inter-converts between any of the common SNP allele definitions and between the major genome builds. In addition, we assessed several factors that may affect imputation quality, and our results indicated that inclusion of singletons in the reference had detrimental effects while ambiguous SNPs had no measurable effect. Unexpectedly, exclusion of genotypes with missing rate > 0.001 (40% of study SNPs) showed no significant decrease of imputation quality (even significantly higher when compared to the imputation with singletons in the reference), especially for rare SNPs. GACT is a new, powerful, and user-friendly tool with both command-line and interactive online versions that can accurately predict, and convert between any of the common allele definitions and between genome builds for genome-wide meta-analysis and imputation of genotypes from SNP-arrays or deep

  5. What is a clinical pathway? Refinement of an operational definition to identify clinical pathway studies for a Cochrane systematic review.

    Science.gov (United States)

    Lawal, Adegboyega K; Rotter, Thomas; Kinsman, Leigh; Machotta, Andreas; Ronellenfitsch, Ulrich; Scott, Shannon D; Goodridge, Donna; Plishka, Christopher; Groot, Gary

    2016-02-23

    Clinical pathways (CPWs) are a common component in the quest to improve the quality of health. CPWs are used to reduce variation, improve quality of care, and maximize the outcomes for specific groups of patients. An ongoing challenge is the operationalization of a definition of CPW in healthcare. This may be attributable to both the differences in definition and a lack of conceptualization in the field of clinical pathways. This correspondence article describes a process of refinement of an operational definition for CPW research and proposes an operational definition for the future syntheses of CPWs literature. Following the approach proposed by Kinsman et al. (BMC Medicine 8(1):31, 2010) and Wieland et al. (Alternative Therapies in Health and Medicine 17(2):50, 2011), we used a four-stage process to generate a five criteria checklist for the definition of CPWs. We refined the operational definition, through consensus, merging two of the checklist's criteria, leading to a more inclusive criterion for accommodating CPW studies conducted in various healthcare settings. The following four criteria for CPW operational definition, derived from the refinement process described above, are (1) the intervention was a structured multidisciplinary plan of care; (2) the intervention was used to translate guidelines or evidence into local structures; (3) the intervention detailed the steps in a course of treatment or care in a plan, pathway, algorithm, guideline, protocol or other 'inventory of actions' (i.e. the intervention had time-frames or criteria-based progression); and (4) the intervention aimed to standardize care for a specific population. An intervention meeting all four criteria was considered to be a CPW. The development of operational definitions for complex interventions is a useful approach to appraise and synthesize evidence for policy development and quality improvement.

  6. Clinical Definitions of Sarcopenia and Risk of Hospitalization in Community-Dwelling Older Men: The Osteoporotic Fractures in Men Study.

    Science.gov (United States)

    Cawthon, Peggy M; Lui, Li-Yung; Taylor, Brent C; McCulloch, Charles E; Cauley, Jane A; Lapidus, Jodi; Orwoll, Eric; Ensrud, Kristine E

    2017-10-01

    The association between various definitions of sarcopenia and hospitalization has not been evaluated in community-dwelling older men. We used data from 1,516 participants at Visit 3 of the Osteoporotic Fractures in Men (MrOS) study who also had linked Medicare Fee-For-Service Claims data available. We examined the association between several sarcopenia definitions (International Working Group, European Working Group for Sarcopenia in Older Persons, Foundation for the NIH Sarcopenia Project, Baumgartner, and Newman) and hospitalization, using two-part ("hurdle") models, adjusted for age, clinical center, functional limitations, self-reported health, comorbidity, and cognitive function. Predictors included sarcopenia status (the summary definitions and the components of slowness, weakness, and/or lean mass); outcomes included hospitalization and cumulative inpatient days/year in the 3 years following the Visit 3 exam. After accounting for confounding factors, none of the summary definitions or the definition components (slowness, weakness, or low lean mass) were associated with likelihood of hospitalization, the rate ratio of inpatient days among those hospitalized, or the mean rate of inpatient days amongst all participants. Sarcopenia was not associated hospitalization in community-dwelling older men. These results provide further evidence that current sarcopenia definitions are unlikely to identify those who are most likely to have greater hospitalization. © The Author 2017. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  7. Consumer-driven definition of traditional food products and innovation in traditional foods. A qualitative cross-cultural study.

    Science.gov (United States)

    Guerrero, Luis; Guàrdia, Maria Dolors; Xicola, Joan; Verbeke, Wim; Vanhonacker, Filiep; Zakowska-Biemans, Sylwia; Sajdakowska, Marta; Sulmont-Rossé, Claire; Issanchou, Sylvie; Contel, Michele; Scalvedi, M Luisa; Granli, Britt Signe; Hersleth, Margrethe

    2009-04-01

    Traditional food products (TFP) are an important part of European culture, identity, and heritage. In order to maintain and expand the market share of TFP, further improvement in safety, health, or convenience is needed by means of different innovations. The aim of this study was to obtain a consumer-driven definition for the concept of TFP and innovation and to compare these across six European countries (Belgium, France, Italy, Norway, Poland and Spain) by means of semantic and textual statistical analyses. Twelve focus groups were performed, two per country, under similar conditions. The transcriptions obtained were submitted to an ordinary semantic analysis and to a textual statistical analysis using the software ALCESTE. Four main dimensions were identified for the concept of TFP: habit-natural, origin-locality, processing-elaboration and sensory properties. Five dimensions emerged around the concept of innovation: novelty-change, variety, processing-technology, origin-ethnicity and convenience. TFP were similarly perceived in the countries analysed, while some differences were detected for the concept of innovation. Semantic and statistical analyses of the focus groups led to similar results for both concepts. In some cases and according to the consumers' point of view the application of innovations may damage the traditional character of TFP.

  8. A Study on Diffusion Pattern of Technology Convergence: Patent Analysis for Korea

    Directory of Open Access Journals (Sweden)

    Jae Young Choi

    2015-08-01

    Full Text Available Technology convergence indicates that technologies of different application areas are converted into a new and common unity of technology. Its range spans from inter-field, whereby technologies are converged between heterogeneous fields in homogeneous sector, to a wider inter-sector, whereby technologies belong to heterogeneous technology sector are converged. This paper determined the definition of technology convergence from previous literature and classified patents into technology category depending on patent information. Furthermore, we empirically measure technology convergence degree based on co-classification analysis and estimate its diffusion trend at the entire technology domain level by using overall 1,476,967 of patents filed to the KIPO (Korean Intellectual Property Office from 1998 to 2010. As a result, potential size and growth rate of technology convergence are varied by both technology and type of technology convergence, i.e., inter-field and inter-sector technology convergence. Diffusion pattern of inter-sector technology convergence appears as the more various form than that of inter-field technology convergence. In a relationship between potential size and growth rate of technology convergence, growth rate of technology convergence is in inverse proportion to potential size of technology convergence in general. That is, the faster the growth rate of technology convergence, the smaller the potential size of technology convergence. In addition, this paper found that technology convergence of the instrument and chemistry sector is actively progressing in both inter-field and inter-sector convergence, while the technologies related to Information and Communication Technology (ICT in electrical engineering sector have relatively mature progress of technology convergence, especially in inter-sector technology convergence.

  9. Young Adults, Technology, and Weight Loss: A Focus Group Study

    OpenAIRE

    Stephens, Janna; Moscou-Jackson, Gyasi; Allen, Jerilyn K.

    2015-01-01

    Overweight and obesity are a major concern in young adults. Technology has been integrated into many weight loss interventions; however little is known about the use of this technology in young adults. The purpose of this study was to explore through focus group sessions the opinions of young adults on the use of technology for weight loss. A total of 17 young adults, between 18 and 25 years of age, participated in three focus group sessions. Major results indicated that young adults have ver...

  10. Assimilation of enterprise technology upgrades: a factor-based study

    Science.gov (United States)

    Claybaugh, Craig C.; Ramamurthy, Keshavamurthy; Haseman, William D.

    2017-02-01

    The purpose of this study is to gain a better understanding of the differences in the propensity of firms to initiate and commit to the assimilation of an enterprise technology upgrade. A research model is proposed that examines the influences that four technological and four organisational factors have on predicting assimilation of a technology upgrade. Results show that firms with a greater propensity to assimilate the new enterprise resource planning (ERP) version have a higher assessment of relative advantage, IS technical competence, and the strategic role of IS relative to those firms with a lower propensity to assimilate a new ERP version.

  11. Study habits and technology use in Italian university students.

    Science.gov (United States)

    Poscia, Andrea; Frisicale, Emanuela Maria; Parente, Paolo; de Waure, Chiara; La Milia, Daniele Ignazio; Di Pietro, Maria Luisa

    2015-01-01

    Students' ability of learning is influenced by study habits. Among these, the use of technologies has assumed a controversial role. The aim of this paper is to analyse studying approach, the use of technologies and how they affect study habits in a population of university students addressed by the "Sportello Salute Giovani" ("Youth Health Information Desk") questionnaire. 16 questions referred to the approach to studying and the use of technologies (number 77-93) were analyzed. Absolute and relative frequencies were calculated. Stratification for sex, age and socio-economic status were performed and Chi square test was used to test the difference between sex, age class and socio-economic groups. 99.7% of students declared to have at least one mobile phone and 68.7% to use smartphones, i-phones and i-pads. Males (20.9% vs 14.9% female, p students (31.7% among 25-30 years old students vs 21.3% among 18-21 years old, p students with the highest socio-economic level (87.8% vs 54.2% of the lowest) seem more likely to use digital technologies/Internet for educational purposes. Our survey revealed that most college students still prefer approach the study using books instead of digital tools, but this attitude is conflicting with how many hours they use computers and surf Internet per weeks. Therefore, further studies are needed to understand better technology influence on study habits and its implication on health.

  12. 2015 Edition Health Information Technology (Health IT) Certification Criteria, 2015 Edition Base Electronic Health Record (EHR) Definition, and ONC Health IT Certification Program Modifications. Final rule.

    Science.gov (United States)

    2015-10-16

    This final rule finalizes a new edition of certification criteria (the 2015 Edition health IT certification criteria or "2015 Edition'') and a new 2015 Edition Base Electronic Health Record (EHR) definition, while also modifying the ONC Health IT Certification Program to make it open and accessible to more types of health IT and health IT that supports various care and practice settings. The 2015 Edition establishes the capabilities and specifies the related standards and implementation specifications that Certified Electronic Health Record Technology (CEHRT) would need to include to, at a minimum, support the achievement of meaningful use by eligible professionals (EPs), eligible hospitals, and critical access hospitals (CAHs) under the Medicare and Medicaid EHR Incentive Programs (EHR Incentive Programs) when such edition is required for use under these programs.

  13. Second Information Technology in Education Study: SITES 2006 Technical Report

    Science.gov (United States)

    Carstens, Ralph, Ed.; Pelgrum, Willem J., Ed.

    2009-01-01

    The International Association for the Evaluation of Educational Achievement (IEA) has been conducting comparative studies for 50 years. SITES 2006 is the fifth wave of surveys related to information and communication technology (ICT), a wave that IEA started with its Computers in Education Study (two studies with data collection in 1989 and 1992),…

  14. The study of technological prevention method of road accident ...

    African Journals Online (AJOL)

    The study of technological prevention method of road accident related to driver and vehicle. ... road accident prevention method based on the factors studied. The study of this paper can provide forceful data analysis support for the road traffic safety related research. Keywords: road accident; accident prevention; road safety.

  15. Magnetometer instrument team studies for the definition phase of the outer planets grand tour

    Science.gov (United States)

    Coleman, P. J., Jr.

    1972-01-01

    The objectives of magnetic field investigations on missions to the outer planets were defined as well as an instrumentation system, a program of studies and instrument development tasks was proposed for the mission definition phase of the Outer Planets Grand Tour project. A report on the status of this program is given. Requirements were also established for the spacecraft and the mission which would insure their compatibility with the magnetic field investigation proposed for the outer planets missions and developed figures of merit for encounter trajectories. The spacecraft-instrumentation interface and the on-board data handling system were defined in various reports by the Project Team and in the reports by the Science Steering Group. The defining program for exploring the outer planets within the more restrictive constraints of the Mariner Jupiter-Saturn project included defining a limited magnetic field investigation.

  16. Integration of health technology assessment recommendations into organizational and clinical practice: A case study in Catalonia.

    Science.gov (United States)

    Gagnon, Marie-Pierre; Sánchez, Emília; Pons, Joan M V

    2006-01-01

    Evaluating the impact of recommendations based upon health technology assessment (HTA) represents a challenge for both HTA agencies and healthcare policy makers. This research sought to understand factors affecting the uptake of HTA recommendations to support decision making with respect to the introduction of three health technologies. Using a multidimensional framework, based upon a combination of theoretical models, a case study was conducted. A total of twenty-eight semistructured interviews were done with physicians from fifteen hospitals and other stakeholders in Catalonia. Interview content was analyzed iteratively and classified according to theoretical dimensions and contextual factors. At the sociopolitical level, factors related to the organization and financing of the health system were found to affect the utilization of HTA recommendations. At the healthcare organization level, existing collaborations between the hospital and the HTA agency favored the integration of recommendations into practices. Formalism in the organization also influenced the utilization of HTA recommendations. At the professional level, the high degree of autonomy of specialists, the importance of peers and collegial control, and the definition of professional roles and responsibilities influenced physicians' willingness to integrate HTA recommendations into their practice. This study offers a comprehensive framework to understand the complex dynamics that affect adoption of health technologies in organizational and professional practices. The findings suggest some avenues to promote the integration of HTA recommendations into practices and, thus, increase the utilization of scientific evidence to support decision making in health care.

  17. Using GPS technology to (re-examine operational definitions of ‘neighbourhood’ in place-based health research

    Directory of Open Access Journals (Sweden)

    Boruff Bryan J

    2012-06-01

    Full Text Available Abstract Background Inconsistencies in research findings on the impact of the built environment on walking across the life course may be methodologically driven. Commonly used methods to define ‘neighbourhood’, from which built environment variables are measured, may not accurately represent the spatial extent to which the behaviour in question occurs. This paper aims to provide new methods for spatially defining ‘neighbourhood’ based on how people use their surrounding environment. Results Informed by Global Positioning Systems (GPS tracking data, several alternative neighbourhood delineation techniques were examined (i.e., variable width, convex hull and standard deviation buffers. Compared with traditionally used buffers (i.e., circular and polygon network, differences were found in built environment characteristics within the newly created ‘neighbourhoods’. Model fit statistics indicated that exposure measures derived from alternative buffering techniques provided a better fit when examining the relationship between land-use and walking for transport or leisure. Conclusions This research identifies how changes in the spatial extent from which built environment measures are derived may influence walking behaviour. Buffer size and orientation influences the relationship between built environment measures and walking for leisure in older adults. The use of GPS data proved suitable for re-examining operational definitions of neighbourhood.

  18. Chemistry of water and steam in power plants and related technologies. Glossary of terms and definitions English - German; German - English

    Energy Technology Data Exchange (ETDEWEB)

    Schmitz, H.P.; Teutenberg, U.

    2006-07-01

    This new edition of a technical dictionary is an evaluation of the technical terms found in the domestic and foreign literature and in information brochures of specialist firms, directives, guidelines, standards, etc. This dictionary contains more than 3,000 terms mainly with definitions with respect to the chemistry of water and steam in power plants along with the related types of water (untreated water, feedwater and boiler water, make-up water, waste water) and the water treatment processes (ion exchange, membrane process, etc.), water conditioning and chemical analysis, internal cleaning of steam generating plants (e.g. flushing, boiling-out, pre-operational and operational acid cleaning, steam blowing) as well as fundamentals of water chemistry. The technical knowledge of the authors, Heinz-Peter Schmitz, FDBR, with more than 25 years professional experience as translator/official in charge of documentation and Ulrich Teutenberg, Babcock/Hitachi with more than 30 years professional experience as senior consultant for water chemistry and commissioning is reflected in this dictionary. Part 1 contains the English-German version, Part 2 the German-English version. (orig.)

  19. OB CITY–Definition of a Family-Based Intervention for Childhood Obesity Supported by Information and Communication Technologies

    Science.gov (United States)

    Hu, Ruofei; Cancela, Jorge; Cea, Gloria; Vlachopapadopoulou, Elpis-Athina; Fotiadis, Dimitrios I.; Fico, Giuseppe

    2016-01-01

    Childhood obesity is becoming one of the 21st century’s most important public health problems. Nowadays, the main treatment of childhood obesity is behavior intervention that aims at improve children’s lifestyle to arrest the disease. Information and communication technologies (ICTs) have not been widely employed in this intervention, and most of existing ICTs systems are not having a long-term effect. The purpose of this paper is to define a system to support family-based intervention through a state-of-the-art analysis of family-based interventions and related technological solutions first, and then using the analytic hierarchy process to derive a childhood obesity family-based behavior intervention model, and finally to provide a prototype of a system called OB CITY. The system makes use of applied behavior analysis, affective computing technologies, as well as serious game and gamification techniques, to offer long term services in all care dimensions of the family-based behavioral intervention aiming to provide positive effects to the treatment of childhood obesity. PMID:27602306

  20. Definition, technology readiness, and development cost of the orbit transfer vehicle engine integrated control and health monitoring system elements

    Science.gov (United States)

    Cannon, I.; Balcer, S.; Cochran, M.; Klop, J.; Peterson, S.

    1991-01-01

    An Integrated Control and Health Monitoring (ICHM) system was conceived for use on a 20 Klb thrust baseline Orbit Transfer Vehicle (OTV) engine. Considered for space used, the ICHM was defined for reusability requirements for an OTV engine service free life of 20 missions, with 100 starts and a total engine operational time of 4 hours. Functions were derived by flowing down requirements from NASA guidelines, previous OTV engine or ICHM documents, and related contracts. The elements of an ICHM were identified and listed, and these elements were described in sufficient detail to allow estimation of their technology readiness levels. These elements were assessed in terms of technology readiness level, and supporting rationale for these assessments presented. The remaining cost for development of a minimal ICHM system to technology readiness level 6 was estimated. The estimates are within an accuracy range of minus/plus 20 percent. The cost estimates cover what is needed to prepare an ICHM system for use on a focussed testbed for an expander cycle engine, excluding support to the actual test firings.

  1. OB CITY-Definition of a Family-Based Intervention for Childhood Obesity Supported by Information and Communication Technologies.

    Science.gov (United States)

    Hu, Ruofei; Cancela, Jorge; Arredondo Waldmeyer, Maria Teresa; Cea, Gloria; Vlachopapadopoulou, Elpis-Athina; Fotiadis, Dimitrios I; Fico, Giuseppe

    2016-01-01

    Childhood obesity is becoming one of the 21st century's most important public health problems. Nowadays, the main treatment of childhood obesity is behavior intervention that aims at improve children's lifestyle to arrest the disease. Information and communication technologies (ICTs) have not been widely employed in this intervention, and most of existing ICTs systems are not having a long-term effect. The purpose of this paper is to define a system to support family-based intervention through a state-of-the-art analysis of family-based interventions and related technological solutions first, and then using the analytic hierarchy process to derive a childhood obesity family-based behavior intervention model, and finally to provide a prototype of a system called OB CITY. The system makes use of applied behavior analysis, affective computing technologies, as well as serious game and gamification techniques, to offer long term services in all care dimensions of the family-based behavioral intervention aiming to provide positive effects to the treatment of childhood obesity.

  2. Technology Integration in the Schools of Guyana: A Case Study

    Science.gov (United States)

    MacKinnon, Gregory; MacKinnon, Paula

    2010-01-01

    The following study examines the implementation of learning technologies in Guyana, South America. Specifically, the study addresses the impact of using interactive radio instruction for teaching mathematics and SuccessMaker software for enhancing literacy skills. The research results were based on surveys, interviews, classroom observations, and…

  3. Integrating Educational Technologies into Teacher Education: A Case Study

    Science.gov (United States)

    Rawlins, Peter; Kehrwald, Benjamin

    2014-01-01

    This article is a case study of an integrated, experiential approach to improving pre-service teachers' understanding and use of educational technologies in one New Zealand teacher education programme. The study examines the context, design and implementation of a learning activity which integrated student-centred approaches, experiential…

  4. Innovation in gynaecological brachytherapy: new technologies, pulse dose-rate brachytherapy, image, definition of new volumes of interest and their impact on dosimetry: application in a clinical research programme 'S.T.I.C.'

    International Nuclear Information System (INIS)

    Haie-Meder, C.; Peiffert, D.

    2006-01-01

    Brachytherapy plays a fundamental role in the therapeutic approach of patients with stage I-IV cervical carcinoma. Technical modalities have evolved during the last decades: stepping source technology, imaging modalities development, specially IMN, treatment planning system integrating 3D images. Images from CT-Scan and MRI have contributed to a better knowledge of tumoral extension and critical organs. CT and/or MRI compatible applicators allow a sectional image based approach with a better definition of tumour volume compared to traditional approaches. The introduction of 3D image based approach for GTV and CTV requires new definitions and a common language. In 2000, a working group within GEC-ESTRO was created to support 3D image based 3D treatment planning approach in cervix cancer BT. The task was to determine a common terminology enabling various groups to use a common language. Recommendations were described and proposed based on clinical experience and dosimetric concepts of different institutions. Two CTVs were described en relation to the risk for recurrence: high-risk CTV and intermediate risk CTV. In order to better define the role of such definitions and their potential impact on the complication incidence in patients with cervical cancer, a special French programme was developed. The aim of this programme is to study the incidence of the severe 2-year complication rate in two comparable patient populations: one population is treated using PDR brachytherapy with CT-Scan or MRI with the applicators in place allowing a 3D dosimetry with optimization, the second population is treated using standard X-rays radiographs, without any delineation of the target nor optimisation. Each population arm includes 425 patients. A medico-economic assessment is performed, allowing a real cost of the most sophisticated approach compared to a historical dosimetric system. (author)

  5. Using interactive video technology in nursing education: a pilot study.

    Science.gov (United States)

    Zerr, Daria M; Pulcher, Karen L

    2008-02-01

    A pilot study was conducted to analyze the benefits of using interactive technology with external assessors and graduating senior nursing students during Senior Nurse Leadership Assessment Day at the University of Central Missouri. The primary aim was to determine whether videoconferencing technology would promote recruitment and retention of professional nurse external assessors without compromising student learning. Among the issues discussed are the advantages and disadvantages of using interactive videoconferencing technology in education and the influence of external assessors in nursing education. The study results indicate that interactive videoconferencing is an effective, accepted format for educational opportunities such as Senior Nurse Leadership Assessment Day, based on the lived experiences of the study participants. In addition, the results demonstrate that interactive videoconferencing does not compromise student learning or assessment by external assessors.

  6. A feasibility study for a manufacturing technology deployment center

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-31

    The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).

  7. Hurdling barriers through market uncertainty: Case studies ininnovative technology adoption

    Energy Technology Data Exchange (ETDEWEB)

    Payne, Christopher T.; Radspieler Jr., Anthony; Payne, Jack

    2002-08-18

    The crisis atmosphere surrounding electricity availability in California during the summer of 2001 produced two distinct phenomena in commercial energy consumption decision-making: desires to guarantee energy availability while blackouts were still widely anticipated, and desires to avoid or mitigate significant price increases when higher commercial electricity tariffs took effect. The climate of increased consideration of these factors seems to have led, in some cases, to greater willingness on the part of business decision-makers to consider highly innovative technologies. This paper examines three case studies of innovative technology adoption: retrofit of time-and-temperature signs on an office building; installation of fuel cells to supply power, heating, and cooling to the same building; and installation of a gas-fired heat pump at a microbrewery. We examine the decision process that led to adoption of these technologies. In each case, specific constraints had made more conventional energy-efficient technologies inapplicable. We examine how these barriers to technology adoption developed over time, how the California energy decision-making climate combined with the characteristics of these innovative technologies to overcome the barriers, and what the implications of hurdling these barriers are for future energy decisions within the firms.

  8. Technology transfer for Ukrainian milk treatment: A case study

    International Nuclear Information System (INIS)

    Dunn, M.J.; Walker, J.S.

    1994-01-01

    As a result of the Chernobyl Nuclear Power Plant accident, radioactive fission products have contaminated the food chain in the Ukraine. The highest doses to humans are a result of cesium contamination in milk. The milk produced in the Ukraine contains radioactive cesium at levels up to 10 times the acceptance standards. Bradtec has developed and demonstrated technology for the US Department of Energy for the treatment of groundwater and effluent water. This technology has also been tested and demonstrated for the Ukrainian government for the purpose of treating contaminated milk. Bradtec, a small business offering specialized technologies in the field of environmental remediation and waste management, has successfully worked with a consortium of businesses, National Laboratories and DOE Headquarters staff to develop and implement a technology demonstration strategy which has led to the implementation of a series collaboration agreements with Ukrainian officials. This paper describes, in a case study approach, the path followed by Bradtec and its collaboration partners in successfully implementing a technology transfer strategy. Also presented is an update on new programs that can provide benefit to private sector companies as DOE seeks to assist the private sector in joint venture/technology transfer relationships with the NIS (New Independent States). This paper should be of interest to all businesses seeking to participate in business opportunities in the NIS

  9. Foresight Study on Advanced Conversion Technologies of Fossil Fuels

    International Nuclear Information System (INIS)

    Claver, A.; Cabrera, J. A.

    2000-01-01

    The Observatorio de Prospectiva Tecnologica Industrial (OPTI) is a Foundation supported by the Ministry of Industry and Energy, (MINER) and has as main objective to provide a basic information and knowledge on technology evolution. This information will be accessible to the Administration and to the Companies and can be taking into account in planning and decision making of technology policies. Ciemat is member of OPTI and is the organism in charge of the actions in the Energy sector. CIEMAT has the responsibility on the realisation of the sector studies to get in three years (1998 to 2001) a foresight vision of the critical technology topics. The OPTI integrated strategic plan undertake the analysis of other seven technology sectors, with the same criteria on methodological aspects. Delphi method was used for the realization of the studies. It consisted of a survey conducted in two rounds using a questionnaire to check the experts opinion. The time frame of the studies was defined from 1999 to 2015. The study presented in this document has been performed by CIEMAT in the second stage of the OPTI activities. The main goal behind this study is to identify the advanced clean and efficient technologies for the conversion of fossil fuels to promote in our country. The questionnaire was addressed to 250 experts and the response rate was about the 37%, ratifying the final results. The spanish position and the barriers for the development of each technology has been determined and also the recommended measures to facilitate their performance in the future. This basic information is consider of main interest, taking in account the actual energetic situation with a foreseeable demand increase and fossil fuels dependence. (Author) 17 refs

  10. Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transpot project-demonstration act system definition

    Science.gov (United States)

    Hanks, G. W.; Shomber, H. A.; Crumb, C. B.; Flora, C. C.; Macdonald, K. A. B.; Smith, R. D.; Sassi, A. P.; Dorwart, R. J.

    1982-01-01

    The 1985 ACT airplane is the Final Active Controls Technology (ACT) Airplane with the addition of three-axis fly by wire. Thus it retains all the efficiency features of the full ACT system plus the weight and cost savings accruing from deletion of the mechanical control system. The control system implements the full IAAC spectrum of active controls except flutter-mode control, judged essentially nonbeneficial, and incorporates new control surfaces called flaperons to make the most of wing-load alleviation. This redundant electronic system is conservatively designed to preserve the extreme reliability required of crucial short-period pitch augmentation, which provides more than half of the fuel savings.

  11. Evaluation of surveillance case definition in the diagnosis of leptospirosis, using the Microscopic Agglutination Test: a validation study.

    Science.gov (United States)

    Dassanayake, Dinesh L B; Wimalaratna, Harith; Agampodi, Suneth B; Liyanapathirana, Veranja C; Piyarathna, Thibbotumunuwe A C L; Goonapienuwala, Bimba L

    2009-04-22

    Leptospirosis is endemic in both urban and rural areas of Sri Lanka and there had been many out breaks in the recent past. This study was aimed at validating the leptospirosis surveillance case definition, using the Microscopic Agglutination Test (MAT). The study population consisted of patients with undiagnosed acute febrile illness who were admitted to the medical wards of the Teaching Hospital Kandy, from 1st July 2007 to 31st July 2008. The subjects were screened to diagnose leptospirosis according to the leptospirosis case definition. MAT was performed on blood samples taken from each patient on the 7th day of fever. Leptospirosis case definition was evaluated in regard to sensitivity, specificity and predictive values, using a MAT titre >or= 1:800 for confirming leptospirosis. A total of 123 patients were initially recruited of which 73 had clinical features compatible with the surveillance case definition. Out of the 73 only 57 had a positive MAT result (true positives) leaving 16 as false positives. Out of the 50 who didn't have clinical features compatible with the case definition 45 had a negative MAT as well (true negatives), therefore 5 were false negatives. Total number of MAT positives was 62 out of 123. According to these results the test sensitivity was 91.94%, specificity 73.77%, positive predictive value and negative predictive values were 78.08% and 90% respectively. Diagnostic accuracy of the test was 82.93%. This study confirms that the surveillance case definition has a very high sensitivity and negative predictive value with an average specificity in diagnosing leptospirosis, based on a MAT titre of >or= 1: 800.

  12. Technology Integration in Science Education: A Study of How Teachers Use Modern Learning Technologies in Biology Classrooms

    Science.gov (United States)

    Gnanakkan, Dionysius Joseph

    2017-01-01

    This multiple case-study investigated how high school biology teachers used modern learning technologies (probes, interactive simulations and animations, animated videos) in their classrooms and why they used the learning technologies. Another objective of the study was to assess whether the use of learning technologies alleviated misconceptions…

  13. Technology spin-offs generation – a multicase study

    Directory of Open Access Journals (Sweden)

    Jonas Mendes Constante

    2014-05-01

    Full Text Available The objective of this study is to understand how small businesses can innovate through the generation of technological spin-offs, identifying motivations, influences and barriers to achieving this phenomenon. Through a qualitative and exploratory study, we analyzed four cases of technological spin-offs in Santa Catarina State. We collected data through field observations, historical data and semi-structured interviews. The main reasons found for spin-offs creation were: diversification and to complement the value chain of the parent company and to ensure greater focus for a specific technology. The main barrier was lack of capital. Government initiatives to support the creation of new businesses, coupled with the organizational culture open to entrepreneurship and investment in R&D, contributed to the development of spin-offs analyzed. This work contributes to the understanding that small and medium-sized technology-based companies are a source of technological spin-offs and can benefit from the occurrence of this process.

  14. Outcomes Definitions and Statistical Tests in Oncology Studies: A Systematic Review of the Reporting Consistency.

    Science.gov (United States)

    Rivoirard, Romain; Duplay, Vianney; Oriol, Mathieu; Tinquaut, Fabien; Chauvin, Franck; Magne, Nicolas; Bourmaud, Aurelie

    2016-01-01

    Quality of reporting for Randomized Clinical Trials (RCTs) in oncology was analyzed in several systematic reviews, but, in this setting, there is paucity of data for the outcomes definitions and consistency of reporting for statistical tests in RCTs and Observational Studies (OBS). The objective of this review was to describe those two reporting aspects, for OBS and RCTs in oncology. From a list of 19 medical journals, three were retained for analysis, after a random selection: British Medical Journal (BMJ), Annals of Oncology (AoO) and British Journal of Cancer (BJC). All original articles published between March 2009 and March 2014 were screened. Only studies whose main outcome was accompanied by a corresponding statistical test were included in the analysis. Studies based on censored data were excluded. Primary outcome was to assess quality of reporting for description of primary outcome measure in RCTs and of variables of interest in OBS. A logistic regression was performed to identify covariates of studies potentially associated with concordance of tests between Methods and Results parts. 826 studies were included in the review, and 698 were OBS. Variables were described in Methods section for all OBS studies and primary endpoint was clearly detailed in Methods section for 109 RCTs (85.2%). 295 OBS (42.2%) and 43 RCTs (33.6%) had perfect agreement for reported statistical test between Methods and Results parts. In multivariable analysis, variable "number of included patients in study" was associated with test consistency: aOR (adjusted Odds Ratio) for third group compared to first group was equal to: aOR Grp3 = 0.52 [0.31-0.89] (P value = 0.009). Variables in OBS and primary endpoint in RCTs are reported and described with a high frequency. However, statistical tests consistency between methods and Results sections of OBS is not always noted. Therefore, we encourage authors and peer reviewers to verify consistency of statistical tests in oncology studies.

  15. Space platform expendables resupply concept definition study. Volume 3: Work breakdown structure and work breakdown structure dictionary

    Science.gov (United States)

    1984-01-01

    The work breakdown structure (WBS) for the Space Platform Expendables Resupply Concept Definition Study is described. The WBS consists of a list of WBS elements, a dictionary of element definitions, and an element logic diagram. The list and logic diagram identify the interrelationships of the elements. The dictionary defines the types of work that may be represented by or be classified under each specific element. The Space Platform Expendable Resupply WBS was selected mainly to support the program planning, scheduling, and costing performed in the programmatics task (task 3). The WBS is neither a statement-of-work nor a work authorization document. Rather, it is a framework around which to define requirements, plan effort, assign responsibilities, allocate and control resources, and report progress, expenditures, technical performance, and schedule performance. The WBS element definitions are independent of make-or-buy decisions, organizational structure, and activity locations unless exceptions are specifically stated.

  16. Life sciences payload definition and integration study. Volume 1: Executive summary. [carry-on laboratory for Spacelab

    Science.gov (United States)

    1974-01-01

    The definition and integration tasks involved in the development of design concepts for a carry-on laboratory (COL), to be compatible with Spacelab operations, were divided into the following study areas: (1) identification of research and equipment requirements of the COL; (2) development of a number of conceptual layouts for COL based on the defined research of final conceptual designs; and (4) development of COL planning information for definition of COL/Spacelab interface data, cost data, and program cost schedules, including design drawings of a selected COL to permit fabrication of a functional breadboard.

  17. Reconsidering the International Association for the Study of Pain definition of pain

    Directory of Open Access Journals (Sweden)

    Milton Cohen

    2018-04-01

    Conclusion:. Based on these results, a revised definition of pain is offered: Pain is a mutually recognizable somatic experience that reflects a person's apprehension of threat to their bodily or existential integrity.

  18. Study habits and technology use in Italian university students

    Directory of Open Access Journals (Sweden)

    Andrea Poscia

    2015-06-01

    Full Text Available BACKGROUND: Students' ability of learning is influenced by study habits. Among these, the use of technologies has assumed a controversial role. The aim of this paper is to analyse studying approach, the use of technologies and how they affect study habits in a population of university students addressed by the "Sportello Salute Giovani" ("Youth Health Information Desk" questionnaire. METHODS: 16 questions referred to the approach to studying and the use of technologies (number 77-93 were analyzed. Absolute and relative frequencies were calculated. Stratification for sex, age and socio-economic status were performed and Chi square test was used to test the difference between sex, age class and socio-economic groups. RESULTS: 99.7% of students declared to have at least one mobile phone and 68.7% to use smartphones, i-phones and i-pads. Males (20.9% vs 14.9% female, p < 0.05, older students (31.7% among 25-30 years old students vs 21.3% among 18-21 years old, p < 0.05 and students with the highest socio-economic level (87.8% vs 54.2% of the lowest seem more likely to use digital technologies/Internet for educational purposes. CONCLUSION: Our survey revealed that most college students still prefer approach the study using books instead of digital tools, but this attitude is conflicting with how many hours they use computers and surf Internet per weeks. Therefore, further studies are needed to understand better technology influence on study habits and its implication on health.

  19. Achieving consensus on the definition of conversion to laparotomy: a Delphi study among general surgeons, gynecologists, and urologists.

    Science.gov (United States)

    Blikkendaal, Mathijs D; Twijnstra, Andries R H; Stiggelbout, Anne M; Beerlage, Harrie P; Bemelman, Willem A; Jansen, Frank Willem

    2013-12-01

    In laparoscopic surgery, conversion to laparotomy is associated with worse clinical outcomes, especially if the conversion is due to a complication. Although apparently important, no commonly used definition of conversion exists. The aim of this study was to achieve multidisciplinary consensus on a uniform definition of conversion. On the basis of definitions currently used in the literature, a web-based Delphi consensus study was conducted among members of all four Dutch endoscopic societies. The rate of agreement (RoA) was calculated; a RoA of >70% suggested consensus. The survey was completed by 268 respondents in the first Delphi round (response rate, 45.6%); 43% were general surgeons, 49% gynecologists, and 8% urologists. Average ± standard deviation laparoscopic experience was 12.5 ± 7.2 years. On the basis of the results of round 1, a consensus definition was compiled. Conversion to laparotomy is an intraoperative switch from a laparoscopic to an open abdominal approach that meets the criteria of one of the two subtypes: strategic conversion, a standard laparotomy that is made directly after the assessment of the feasibility of completing the procedure laparoscopically and because of anticipated operative difficulty or logistic considerations; and reactive conversion, the need for a laparotomy because of a complication or (extension of an incision) because of (anticipated) operative difficulty after a considerable amount of dissection (i.e., >15 min in time). A laparotomy after a diagnostic laparoscopy (i.e., to assess the curability of the disease) should not be considered a conversion. In the second Delphi round, a RoA of 90% was achieved with this definition. After two Delphi rounds, consensus on a uniform multidisciplinary definition of conversion was achieved within a representative group of general surgeons, gynecologists, and urologists. An unambiguous interpretation will result in a more reliable clinical registration of conversion and scientific

  20. Studying the Technology of Creating Cortical Electrode Instruments using the Rapid Prototyping Technology

    Directory of Open Access Journals (Sweden)

    Ablyaz T. R.

    2017-06-01

    Full Text Available This paper shows the results of studying the technology of manufacturing cortical electrode-instruments (EI with the use of indirect methods of the Rapid Prototyping technology. Functional EI prototypes were made by layered synthesis of the photopolymer material with the use of the stereolithography technology (SLA - Stereo Lithography Apparatus. The article is focused on two methods of indirect EI manufacturing. One of the EI prototypes was used for making a molded wax model for hot investment casting, followed by applying copper coating. The second prototype was used for applying copper plating to a prepared current-conductive layer. As a result of EDMing a steel workpiece, both EIs reached the desired depth, which is 1 mm. The copper plating applied to the EI preserves its integrity. Through the use of the casting technology, there is a possibility to cut the economic costs by 35%. Using a prototype with preliminarily applied conductive coating makes it possible to make geometrically-complex EIs.

  1. INL - NNL an International Technology Collaboration Case Study - Advanced Fogging Technologies for Decommissioning - 13463

    International Nuclear Information System (INIS)

    Banford, Anthony; Edwards, Jeremy; Demmer, Rick; Rankin, Richard; Hastings, Jeremy

    2013-01-01

    International collaboration and partnerships have become a reality as markets continue to globalize. This is the case in nuclear sector where over recent years partnerships commonly form to bid for capital projects internationally in the increasingly contractorized world and international consortia regularly bid and lead Management and Operations (M and O) / Parent Body Organization (PBO) site management contracts. International collaboration can also benefit research and technology development. The Idaho National Laboratory (INL) and the UK National Nuclear Laboratory (NNL) are internationally recognized organizations delivering leading science and technology development programmes both nationally and internationally. The Laboratories are actively collaborating in several areas with benefits to both the laboratories and their customers. Recent collaborations have focused on fuel cycle separations, systems engineering supporting waste management and decommissioning, the use of misting for decontamination and in-situ waste characterisation. This paper focuses on a case study illustrating how integration of two technologies developed on different sides of the Atlantic are being integrated through international collaboration to address real decommissioning challenges using fogging technology. (authors)

  2. INL - NNL an International Technology Collaboration Case Study - Advanced Fogging Technologies for Decommissioning - 13463

    Energy Technology Data Exchange (ETDEWEB)

    Banford, Anthony; Edwards, Jeremy [National Nuclear Laboratory, 5th Floor Chadwick House, Birchwood Park, Warrington WA3 6AE(United Kingdom); Demmer, Rick; Rankin, Richard [Idaho National Laboratory, Idaho Falls, ID 83401(United States); Hastings, Jeremy [National Nuclear Laboratory, Central Laboratory Sellafield, Seascale, Cumbria CA20 1PG (United Kingdom)

    2013-07-01

    International collaboration and partnerships have become a reality as markets continue to globalize. This is the case in nuclear sector where over recent years partnerships commonly form to bid for capital projects internationally in the increasingly contractorized world and international consortia regularly bid and lead Management and Operations (M and O) / Parent Body Organization (PBO) site management contracts. International collaboration can also benefit research and technology development. The Idaho National Laboratory (INL) and the UK National Nuclear Laboratory (NNL) are internationally recognized organizations delivering leading science and technology development programmes both nationally and internationally. The Laboratories are actively collaborating in several areas with benefits to both the laboratories and their customers. Recent collaborations have focused on fuel cycle separations, systems engineering supporting waste management and decommissioning, the use of misting for decontamination and in-situ waste characterisation. This paper focuses on a case study illustrating how integration of two technologies developed on different sides of the Atlantic are being integrated through international collaboration to address real decommissioning challenges using fogging technology. (authors)

  3. Comparative prognostic performance of definitions of prediabetes: a prospective cohort analysis of the Atherosclerosis Risk in Communities (ARIC) study.

    Science.gov (United States)

    Warren, Bethany; Pankow, James S; Matsushita, Kunihiro; Punjabi, Naresh M; Daya, Natalie R; Grams, Morgan; Woodward, Mark; Selvin, Elizabeth

    2017-01-01

    No consensus on definitions of prediabetes exists among international organisations. Analysis of associations with different definitions and clinical complications can inform the comparative value of different prediabetes definitions. We compared the risk of future outcomes across different prediabetes definitions based on fasting glucose concentration, HbA 1c , and 2 h glucose concentration during over two decades of follow-up in the community-based Atherosclerosis Risk in Communities (ARIC) study. We aimed to analyse the associations of definitions with outcomes to provide a comparison of different definitions. We did a prospective cohort study of participants in the ARIC study who did not have diagnosed diabetes and who attended visit 2 (1990-92; n=10 844) and who attended visit 4 (1996-98; n=7194). ARIC participants were enrolled from four communities across the USA. Fasting glucose concentration and HbA 1c were measured at visit 2 and fasting glucose concentration and 2 h glucose concentration were measured at visit 4. We compared prediabetes definitions based on fasting glucose concentration (American Diabetes Association [ADA] fasting glucose concentration cutoff 5·6-6·9 mmol/L and WHO fasting glucose concentration cutoff 6·1-6·9 mmol/L), HbA 1c (ADA HbA 1c cutoff 5·7-6·4% [39-46 mmol/mol] and International Expert Committee [IEC] HbA 1c cutoff 6·0-6·4% [42-46 mmol/mol]), and 2 h glucose concentration (ADA and WHO 2 h glucose concentration cutoff 7·8-11·0 mmol/L). Prediabetes defined using the ADA fasting glucose concentration cutoff (prevalence 4112 [38%] of 10 844 people; 95% CI 37·0-38·8) was the most sensitive for major clinical outcomes, whereas using the ADA HbA 1c cutoff (2027 [19%] of 10 884 people; 18·0-19·4) and IEC HbA 1c cutoff (970 [9%] of 10 844 people; 8·4-9·5), and the WHO fasting glucose concentration cutoff (1213 [11%] of 10 844 people; 10·6-11·8) were more specific. After demographic adjustment, HbA 1c -based

  4. STUDY OF THE USE OF EDIBLE POWDERS TOMATO SAUCE TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    O. Benderska

    2018-04-01

    Full Text Available Considered the technology for the production of edible powders from vegetable raw materials. The technology for producing powders from berries is developed to produce a high-quality product in which all ingredients of raw materials are stored in a concentrated form.The current trend in nutrition is related to the expansion of the range of functional products whose daily use contributes to the prevention of hypovitaminoses and metabolic disorders, and ultimately to the rehabilitation of the population. New, non-traditional sources of local raw materials, including plant based products, need to be explored and exploited in order to address the issue of instantiate new generation of healthy foods, and the development of technologies for obtaining functionalities. The use of fruit crops, the most source of biologically active substances, is very promising in this direction.The Department of Preservation Technology of the National University Food Technology has conducted a study to enable the use of fruit and berries for food powders. To this end, powder has been obtained from the blueberry berries of ordinary, with the establishment of its physico-chemical properties.The patterns of the influence of the blueberry powder on the functional properties of the foodstuffs were investigated in the example of tomato sauces.Analysis of the results of the studies has shown that a blueberry berry powder can be used in the production of canned and other products not only to enrich their functional ingredients but also to provide them with new technological properties. The food powders received do not contain harmful impurities, have high food value, are easily absorbed by the body, compact and long periods of time. Studies have shown that the blueberry powder is a rich source of vitamins (c acid, β-carotene, tocopherol and can be used successfully in the manufacture of tomato sauces with functional properties.

  5. Study of Advanced Propulsion Systems for Small Transport Aircraft Technology (STAT) Program

    Science.gov (United States)

    Baerst, C. F.; Heldenbrand, R. W.; Rowse, J. H.

    1981-01-01

    Definitions of takeoff gross weight, performance, and direct operating cost for both a 30 and 50 passenger airplane were established. The results indicate that a potential direct operating cost benefit, resulting from advanced technologies, of approximately 20 percent would be achieved for the 1990 engines. Of the numerous design features that were evaluated, only maintenance-related items contributed to a significant decrease in direct operating cost. Recommendations are made to continue research and technology programs for advanced component and engine development.

  6. Feasibility study on the development of advanced LWR fuel technology

    International Nuclear Information System (INIS)

    Jung, Youn Ho; Sohn, D. S.; Jeong, Y. H.; Song, K. W.; Song, K. N.; Chun, T. H.; Bang, J. G.; Bae, K. K.; Kim, D. H. and others.

    1997-07-01

    Worldwide R and D trends related to core technology of LWR fuels and status of patents have been surveyed for the feasibility study. In addition, various fuel cycle schemes have been studied to establish the target performance parameters. For the development of cladding material, establishment of long-term research plan for alloy development and optimization of melting process and manufacturing technology were conducted. A work which could characterize the effect of sintering additives on the microstructure of UO 2 pellet has been experimentally undertaken, and major sintering variables and their ranges have been found in the sintering process of UO 2 -Gd 2 O 3 burnable absorber pellet. The analysis of state of the art technology related to flow mixing device for spacer grid and debris filtering device for bottom nozzle and the investigation of the physical phenomena related to CHF enhancement and the establishment of the data base for thermal-hydraulic performance tests has been done in this study. In addition, survey on the documents of the up-to-date PWR fuel assemblies developed by foreign vendors have been carried out to understand their R and D trends and establish the direction of R and D for these structural components. And, to set the performance target of the new fuel, to be developed, fuel burnup and economy under the extended fuel cycle length scheme were estimated. A preliminary study on the failure mechanism of CANDU fuel, key technology and advanced coating has been performed. (author). 190 refs., 31 tabs., 129 figs

  7. Indicators of creativity in a technology class: a case study

    African Journals Online (AJOL)

    study we investigated how learners demonstrate creativity whilst en- gaging in the technological process employing a qualitative research strategy, with observation and focus group interviews as the methods of data collection. From this data, indicators of creativity emerged. Schools must encourage learners to be creative ...

  8. Role of surface studies in science and technology

    Energy Technology Data Exchange (ETDEWEB)

    Karkhanavala, M D [Bhabha Atomic Research Centre, Bombay (India). Chemistry Div.

    1977-01-01

    Reactivity of solids is influenced by the surface properties such as structure, dislocations and composition. Corrosion and erosion are essentially surface phenomena. Surface studies, therefore, assume importance in prevention and minimization of corrosion and erosion. Discussion is illustrated with examples drawn from the field of nuclear power reactor technology.

  9. Indicators of creativity in a technology class: a case study ...

    African Journals Online (AJOL)

    Teachers seem to lack the skills and knowledge needed to recognise when creativity is taking place. In this study we investigated how learners demonstrate creativity whilst engaging in the technological process employing a qualitative research strategy, with observation and focus group interviews as the methods of data ...

  10. Project-Based Learning in Electronic Technology: A Case Study

    Science.gov (United States)

    Li, Li

    2015-01-01

    A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

  11. Educational Technology Adopters: A Case Study in University of Botswana

    Science.gov (United States)

    Dintoe, Seitebaleng Susan

    2018-01-01

    Although University of Botswana implemented national ICT policies and trained the lecturers to use educational technology, there was low-level use of eLearning in teaching and learning. In this regard, qualitative case study approach was used to explore and specifically focus on one aspect of the phenomenon; that is, the University of Botswana as…

  12. Case Study – Idling Reduction Technologies for Emergency Service Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Laughlin, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Owens, Russell J. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-01-01

    This case study explores the use of idle reduction technologies (IRTs) on emergency service vehicles in police, fire, and ambulance applications. Various commercially available IRT systems and approaches can decrease, or ultimately eliminate, engine idling. Fleets will thus save money on fuel, and will also decrease their criteria pollutant emissions, greenhouse gas emissions, and noise.

  13. High-Definition transcranial direct current stimulation in early onset epileptic encephalopathy: a case study.

    Science.gov (United States)

    Meiron, Oded; Gale, Rena; Namestnic, Julia; Bennet-Back, Odeya; David, Jonathan; Gebodh, Nigel; Adair, Devin; Esmaeilpour, Zeinab; Bikson, Marom

    2018-01-01

    Early onset epileptic encephalopathy is characterized by high daily seizure-frequency, multifocal epileptic discharges, severe psychomotor retardation, and death at infancy. Currently, there are no effective treatments to alleviate seizure frequency and high-voltage epileptic discharges in these catastrophic epilepsy cases. The current study examined the safety and feasibility of High-Definition transcranial direct current stimulation (HD-tDCS) in reducing epileptiform activity in a 30-month-old child suffering from early onset epileptic encephalopathy. HD-tDCS was administered over 10 intervention days spanning two weeks including pre- and post-intervention video-EEG monitoring. There were no serious adverse events or side effects related to the HD-tDCS intervention. Frequency of clinical seizures was not significantly reduced. However, interictal sharp wave amplitudes were significantly lower during the post-intervention period versus baseline. Vital signs and blood biochemistry remained stable throughout the entire study. These exploratory findings support the safety and feasibility of 4 × 1 HD-tDCS in early onset epileptic encephalopathy and provide the first evidence of HD-tDCS effects on paroxysmal EEG features in electroclinical cases under the age of 36 months. Extending HD-tDCS treatment may enhance electrographic findings and clinical effects.

  14. Identifiability and Accessibility in Learning Definite Article Usages: A Quasi-Experimental Study with Japanese Learners of English

    Science.gov (United States)

    Hinenoya, Kimiko; Lyster, Roy

    2015-01-01

    The present study investigated the effects of instruction on the use of the definite article "the" by Japanese learners of English by implementing two instructional treatments that varied in the extent to which they emphasized identifiability and accessibility. One instructional treatment, referred to as the traditional (TR) treatment,…

  15. Characteristics of the telescope for high energy gamma-ray astronomy selected for definition studies on the Gamma Ray Observatory

    Science.gov (United States)

    Hughes, E. B.; Hofstadter, R.; Rolfe, J.; Johansson, A.; Bertsch, D. L.; Cruickshank, W. J.; Ehrmann, C. H.; Fichtel, C. E.; Hartman, R. C.; Kniffen, D. A.

    1980-01-01

    The high energy gamma-ray telescope selected for definition studies on the Gamma Ray Observatory provides a substantial improvement in observational capability over earlier instruments. It will have about 20 times more sensitivity, cover a much broader energy range, have considerably better energy resolution and provide a significantly improved angular resolution. The design and performance are described.

  16. Achieving consensus on the definition of conversion to laparotomy: a Delphi study among general surgeons, gynecologists, and urologists

    NARCIS (Netherlands)

    Blikkendaal, Mathijs D.; Twijnstra, Andries R. H.; Stiggelbout, Anne M.; Beerlage, Harrie P.; Bemelman, Willem A.; Jansen, Frank Willem

    2013-01-01

    In laparoscopic surgery, conversion to laparotomy is associated with worse clinical outcomes, especially if the conversion is due to a complication. Although apparently important, no commonly used definition of conversion exists. The aim of this study was to achieve multidisciplinary consensus on a

  17. On the definition of a DEMO (demonstration) reactor

    International Nuclear Information System (INIS)

    Cole, H.C.; Challender, R.S.

    1987-01-01

    The paper is an appendix to a study of the reactor relevance of the NET design concept. The latter study examines whether the technologies and design principles proposed for NET can be directly extrapolated to a demonstration (DEMO) reactor. The authors have suggested a definition of a DEMO, and listed what they considered to be the most important implications of this definition. A table of parameters is included comparing published DEMO's with typical commercial reactor and 'pre-DEMO' studies. (U.K.)

  18. Study on tamper-indicating technology in electronic seals system

    International Nuclear Information System (INIS)

    Xu Xiong; Han Feng; Zuo Guangxia; Zhao Xin; Zhang Quanhu; Di Yuming

    2009-01-01

    To strengthen our national arms control verification technical storage and deepen electronic seals' research, this paper mainly introduces seals' characteristics, functions and work principle, studies on tamper-indicating technology which is a key technology in electronic seals, designs some hardware circuit such as optical transceiver, temperature detection circuit, move detection circuit, re-prized circuit and so on, also designs a software program which is used for recording the destroying or tampering events' information. Experimental results show that electronic seals system can record the destroying or tampering events' information accurately and quickly, and give corresponding tamper-indication. (authors)

  19. Enterprise Social Media: Definition, History, and Prospects for the Study of Social Technologies in Organizations

    NARCIS (Netherlands)

    Leonardi, P.M.; Huysman, M.H.; Steinfield, C.

    2013-01-01

    Social media are increasingly implemented in work organizations as tools for communication among employees. It is important that we develop an understanding of how they enable and constrain the communicative activities through which work is accomplished because it is these very dynamics that

  20. Strategic avionics technology definition studies. Subtask 3-1A: Electrical Actuation (ELA) systems

    Science.gov (United States)

    Pond, Charles L.; Mcdermott, William A.; Lum, Ben T. F.

    1993-01-01

    Electrical actuator (ELA) power efficiency and requirements are examined for space system application. Requirements for Space Shuttle effector systems are presented, along with preliminary ELA trades and selection to form a preliminary ELA system baseline. Power and energy requirements for this baseline ELA system are applicable to the Space Shuttle and similar space vehicles.

  1. Concept definition study for recovery of tumbling satellites. Volume 2: Supporting research and technology report

    Science.gov (United States)

    Cable, D. A.; Derocher, W. L., Jr.; Cathcart, J. A.; Keeley, M. G.; Madayev, L.; Nguyen, T. K.; Preese, J. R.

    1986-01-01

    A number of areas of research and laboratory experiments were identified which could lead to development of a cost efficient remote, disable satellite recovery system. Estimates were planned of disabled satellite motion. A concept is defined as a Tumbling Satellite Recovery kit which includes a modular system, composed of a number of subsystem mechanisms that can be readily integrated into varying combinations. This would enable the user to quickly configure a tailored remote, disabled satellite recovery kit to meet a broad spectrum of potential scenarios. The capability was determined of U.S. Earth based satellite tracking facilities to adequately determine the orientation and motion rates of disabled satellites.

  2. Advanced Technology Subsonic Transport Study: N+3 Technologies and Design Concepts

    Science.gov (United States)

    Raymer, Daniel P.; Wilson, Jack; Perkins, H. Douglas; Rizzi, Arthur; Zhang, Mengmeng; RamirezPuentes, Alfredo

    2011-01-01

    Conceptual Research Corporation, the Science of the Possible, has completed a two-year study of concepts and technologies for future airliners in the 180-passenger class. This NASA-funded contract was primarily focused on the ambitious goal of a 70 percent reduction in fuel consumption versus the market-dominating Boeing 737-800. The study is related to the N+3 contracts awarded in 2008 by NASA s Aeronautics Research Mission Directorate to teams led by Boeing, GE Aviation, MIT, and Northrop Grumman, but with more modest goals and funding. CRC s contract featured a predominant emphasis on propulsion and fuel consumption, but since fuel consumption depends upon air vehicle design as much as on propulsion technology, the study included notional vehicle design, analysis, and parametric studies. Other NASA goals including NOx and noise reduction are of long-standing interest but were not highlighted in this study, other than their inclusion in the propulsion system provided to CRC by NASA. The B-737-800 was used as a benchmark, parametric tool, and design point of departure. It was modeled in the RDS-Professional aircraft design software then subjected to extensive parametric variations of parasitic drag, drag-due-to-lift, specific fuel consumption, and unsized empty weight. These studies indicated that the goal of a 70 percent reduction in fuel consumption could be attained with roughly a 30 percent improvement in all four parameters. The results were then fit to a Response Surface and coded for ease of use in subsequent trade studies. Potential technologies to obtain such savings were identified and discussed. More than 16 advanced concept designs were then prepared, attempting to investigate almost every possible emerging concept for application to this class airliner. A preliminary assessment of these concepts was done based on their total wetted area after design normalization of trimmed maximum lift. This assessment points towards a Tailless Airliner concept which

  3. Study on modeling technology in digital reactor system

    International Nuclear Information System (INIS)

    Liu Xiaoping; Luo Yuetong; Tong Lili

    2004-01-01

    Modeling is the kernel part of a digital reactor system. As an extensible platform for reactor conceptual design, it is very important to study modeling technology and develop some kind of tools to speed up preparation of all classical computing models. This paper introduces the background of the project and basic conception of digital reactor. MCAM is taken as an example for modeling and its related technologies used are given. It is an interface program for MCNP geometry model developed by FDS team (ASIPP and HUT), and designed to run on windows system. MCAM aims at utilizing CAD technology to facilitate creation of MCNP geometry model. There have been two ways for MCAM to utilize CAD technology: (1) Making use of user interface technology in aid of generation of MCNP geometry model; (2) Making use of existing 3D CAD model to accelerate creation of MCNP geometry model. This paper gives an overview of MCAM's major function. At last, several examples are given to demonstrate MCAM's various capabilities. (authors)

  4. The BERG faculty students readiness for information technologies study

    Directory of Open Access Journals (Sweden)

    Horovèák Pavel

    2002-12-01

    Full Text Available The contribution deals with the reconnaissance of our students’ readiness to study information technologies, its interpretation, comparison with some published data as well as with a completion and evaluation of the reconnaissance. It specifies methods and processes of evaluation, structure, sections and questions of the reconnaissance. The reconnaissance was oriented particularly to the evaluation of knowledge in the information technologies area acquired at secondary schools. It was completed in a classical paper form as a preparation for the realization and utilization of questionnaire in the electronic form. The following is constructed using modern internet and database technologies and presents extensive possibilities of evaluation answers respondents. The results of the reconnaissance are presented in the form distribution (sex, domicile, secondary school, secondary school influence, work with a computer, operating and exploitation of internet technologies, familiarity with operating systems and typical applications software and programming languages as well as the interest in information technologies of respondents. The results are compared with some other published data and future perspectives of completion and its evaluation of completion are outlined.

  5. What is my walking neighbourhood? A pilot study of English adults' definitions of their local walking neighbourhoods

    Directory of Open Access Journals (Sweden)

    Davey Rachel

    2010-05-01

    Full Text Available Abstract Background Existing measures of perceptions of the environment associated with walking commonly rely on providing a definition of 'neighbourhood', e.g. 1 mile area around the home. We have little understanding of how these examples relate with adults' own geographical definitions of their neighbourhood area. Our pilot study examined the congruence between definitions used in environmental questionnaires and adults' own definitions of neighbourhood. Methods We conducted 58 face-to-face interviews with participants randomly selected from 10 areas of Stoke-on-Trent, England. Participants were shown printed maps showing their local area with road names and places of interest (e.g. shops, services, green space and were asked: (i to recall usual walking destinations (from their home; (ii to draw their 'neighbourhood walking area' on the map. Annotated maps were scanned back into GIS for analysis. Results When asked to draw their 'neighbourhood' boundary, the resulting area drawn by participants on average represented only 16 ± 20% of the commonly used total straight-line buffer of 1 mile (or 1.6 km with a range of 0.3% to 111%. Even when repeated using a network buffer (rather than straight-line the same comparison resulted in a mean of 36% (± 47% and a range of 0.6 to 245%. Conclusions We found that adults' interpretation of their neighbourhood area does not appear to relate accurately to the definitions typically used in research into environmental perceptions and walking. This mis-match warrants further investigation as definitions used in existing measures may be consistently misclassifying perceived local walking neighbourhoods.

  6. Cost decreases in environmental technology. Evidence from four case studies

    Energy Technology Data Exchange (ETDEWEB)

    Oosterhuis, F. [Instituut for Environmental Studies, Vrije Universiteit VU, Amsterdam (Netherlands)

    2007-07-15

    The cost of a new technology tends to decrease as its uptake grows, and environmental technology is no exception to this general rule. Factors that can bring about such cost reductions include economies of scale, 'learning-by-doing', incremental technological improvements, and growing competition. In preparing environmental policies, the potential for future cost reductions is often disregarded. The present study aims to provide some additional empirical evidence on the cost decreases in environmental technology and the factors that lie behind them. To this end, four exemplary case studies have been selected. The first case (NOx emission abatement by Selective Catalytic Reduction (SCR)), shows a wide variety in cost estimates, without a clear trend. This is even true for the costs of a fairly homogeneous type of investment (SCR in coal fired power plants). Nevertheless, it is clear that an important cost decrease has been achieved by prolonging the lifetime of the catalyst, which is one of the main cost components in SCR. In the second case (NH3 emission abatement by chemical air scrubbers in pig farming) there is not yet sufficient experience with the technology to draw conclusions on the development of costs. However, it is already clear that economizing on the capacity of the system can contribute to important cost savings. Three-way catalytic converters in cars have shown significant price decreases following their large scale introduction on the European market in the early 1990s. Probably economies of scale have played an important role in this case, as the size of the market made mass production possible. To some extent, cost reductions may also be attributed to improvements such as the need for less materials (e.g. platinum). Furthermore, the performance of catalytic converters has improved, implying that the cost per unit of emission reduction has decreased even more than the cost of the device itself. Market prices of Compact Fluorescent Lamps

  7. Simulation studies for the evaluation of health information technologies

    DEFF Research Database (Denmark)

    Ammenwerth, Elske; Hackl, Werner; Binzer, Kristine

    2012-01-01

    It is essential for new health information technologies (IT) to undergo rigorous evaluations to ensure they are effective and safe for use in real-world situations. However, evaluation of new health IT is challenging, as field studies are often not feasible when the technology being evaluated...... is not sufficiently mature. Laboratory-based evaluations have also been shown to have insufficient external validity. Simulation studies seem to be a way to bridge this gap. The aim of this study was to evaluate, using a simulation methodology, the impact of a new prototype of an electronic medication management...... system on the appropriateness of prescriptions and drugrelated activities, including laboratory test ordering or medication changes. This article presents the results of a controlled simulation study with 50 simulation runs, including ten doctors and five simulation patients, and discusses experiences...

  8. DEFINING THE RELEVANT OUTCOME MEASURES IN MEDICAL DEVICE ASSESSMENTS: AN ANALYSIS OF THE DEFINITION PROCESS IN HEALTH TECHNOLOGY ASSESSMENT.

    Science.gov (United States)

    Jacobs, Esther; Antoine, Sunya-Lee; Prediger, Barbara; Neugebauer, Edmund; Eikermann, Michaela

    2017-01-01

    Defining relevant outcome measures for clinical trials on medical devices (MD) is complex, as there is a large variety of potentially relevant outcomes. The chosen outcomes vary widely across clinical trials making the assessment in evidence syntheses very challenging. The objective is to provide an overview on the current common procedures of health technology assessment (HTA) institutions in defining outcome measures in MD trials. In 2012-14, the Web pages of 126 institutions involved in HTA were searched for methodological manuals written in English or German that describe methods for the predefinition process of outcome measures. Additionally, the institutions were contacted by email. Relevant information was extracted. All process steps were performed independently by two reviewers. Twenty-four manuals and ten responses from the email request were included in the analysis. Overall, 88.5 percent of the institutions describe the type of outcomes that should be considered in detail and 84.6 percent agree that the main focus should be on patient relevant outcomes. Specifically related to MD, information could be obtained in 26 percent of the included manuals and email responses. Eleven percent of the institutions report a particular consideration of MD related outcomes. This detailed analysis on common procedures of HTA institutions in the context of defining relevant outcome measures for the assessment of MD shows that standardized procedures for MD from the perspective of HTA institutions are not widespread. This leads to the question if a homogenous approach should be implemented in the field of HTA on MD.

  9. Three-dimensional laparoscopy vs 2-dimensional laparoscopy with high-definition technology for abdominal surgery: a systematic review.

    Science.gov (United States)

    Fergo, Charlotte; Burcharth, Jakob; Pommergaard, Hans-Christian; Kildebro, Niels; Rosenberg, Jacob

    2017-01-01

    This systematic review investigates newer generation 3-dimensional (3D) laparoscopy vs 2-dimensional (2D) laparoscopy in terms of error rating, performance time, and subjective assessment as early comparisons have shown contradictory results due to technological shortcomings. This systematic review was performed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Randomized controlled trials (RCTs) comparing newer generation 3D-laparoscopy with 2D-laparoscopy were included through searches in Pubmed, EMBASE, and Cochrane Central Register of Controlled Trials database. Of 643 articles, 13 RCTs were included, of which 2 were clinical trials. Nine of 13 trials (69%) and 10 of 13 trials (77%) found a significant reduction in performance time and error, respectively, with the use of 3D-laparoscopy. Overall, 3D-laparoscopy was found to be superior or equal to 2D-laparoscopy. All trials featuring subjective evaluation found a superiority of 3D-laparoscopy. More clinical RCTs are still awaited for the convincing results to be reproduced. Copyright © 2016 Elsevier Inc. All rights reserved.

  10. The study of the HTGR technology and its industry applications

    International Nuclear Information System (INIS)

    Lu Yingzhong; Wang Dazhong; Zhong Daxin

    1987-01-01

    This paper summarizes the progress and main results of R and D on High Temperature Reactor technology in INET of Tsinghua University. Several HTR design studies have been carried out and briefly introduced in this paper. While the primary study of the modular HTR process steam application in heavy oil recovery is discussed. A lot of experiments and developmental work, e.g., some HTR component experiments, fuel and material developments have been done, and the major progresses are briefed. (author)

  11. Integrating Science and Technology: Using Technological Pedagogical Content Knowledge as a Framework to Study the Practices of Science Teachers

    Science.gov (United States)

    Pringle, Rose M.; Dawson, Kara; Ritzhaupt, Albert D.

    2015-01-01

    In this study, we examined how teachers involved in a yearlong technology integration initiative planned to enact technological, pedagogical, and content practices in science lessons. These science teachers, engaged in an initiative to integrate educational technology in inquiry-based science lessons, provided a total of 525 lesson plans for this…

  12. Technological characterization of a mineral deposit. A case study: the niobium of Catalao I, Goias State, Brazil

    International Nuclear Information System (INIS)

    Sant'Agostino, Lilia Mascarenhas

    1996-01-01

    This thesis presents a contribution to the subject of ore technological characterization integrated to orebody context, regarding sample, ore characteristics, ore types definition and distribution through the mineral occurrence, and ore reserves modeling using technological parameters. A professional experience in this specialization based a conceptual discussion of the matter, supported by a practical approach. The initial approach is the subject definition, and it's importance for technological and economical feasibility studies, in all phases of mining research and development, as a tool for beneficiation alternatives definition. The multidisciplinary aspect of the knowledge involved for ore characterization is remarked, considering that is an interface segment to be conduced interactively with others. It is an applied mineralogy, that needs some geological and some ore dressing imputes. After the general considerations about importance and applicability, it follows a methodological approach of laboratory procedures and analytical techniques, as a result of practical experience acquired in the study of several ores. The main points discussed are related with criterion to organized laboratory preparation scheme and to select appropriated analytical techniques, without detailing them, for what some specialized bibliography is indicated. Finalizing the theoretical explanation, there is a concise description about computers resources for 3D orebody modeling, and integrated software applied for geology and mining. For illustration, it is exposed a complex ore case study: niobium mineralization associated with the alkaline-carbonatitic occurrence of Catalao I, located in Goias State, Brazil. Besides the explanation of laboratory procedures and methods applied, results treatment and interpretation are emphasized, under both characterization and economic point of view. (author)

  13. Definition of intercultural competence (IC) in undergraduate students at a private university in the USA: A mixed-methods study.

    Science.gov (United States)

    Gierke, Lioba; Binder, Nadine; Heckmann, Mark; Odağ, Özen; Leiser, Anne; Kedzior, Karina Karolina

    2018-01-01

    Intercultural competence (IC) is an important skill to be gained from higher education. However, it remains unclear what IC means to students and what factors might influence their definitions of IC. The aim of the current study was to qualitatively assess how students at one higher education institution in the USA define IC and to quantitatively test for relationships among IC components and various demographic characteristics, including intercultural experience and study context. A further aim was to descriptively compare the IC definitions from the US sample with the definitions obtained from another sample of university students in Germany. A purposive sample of n = 93 undergraduate, second semester students at Dickinson College, USA, participated in the study by completing an online questionnaire. The qualitative data were content-analyzed to define the dimensions of IC. The quantitative data were cluster-analyzed to assess the multivariate relationships among the IC components and the demographic characteristics of the sample. The most important dimensions of IC were Knowledge, External Outcomes (interaction, communication), and Attitudes (respect, tolerance) according to the US sample. The most frequently chosen dimensions of IC differed between both samples: Knowledge was chosen by the sample in the USA while External Outcomes was chosen by the sample in Germany. Relative to the US sample, significantly more students chose Attitudes, External Outcomes, and Intrapersonal Skills in the sample in Germany. The relationships among IC components and demographic characteristics were only weak in the US sample. A person with IC was rated as Open-minded and Respectful by students who lived predominantly in the USA or Tolerant and Curious by those who lived outside the USA for at least six months. The current results suggest that students residing in two countries (USA or Germany) define IC using similar dimensions. However, IC definitions may depend on the

  14. High-Definition Medicine.

    Science.gov (United States)

    Torkamani, Ali; Andersen, Kristian G; Steinhubl, Steven R; Topol, Eric J

    2017-08-24

    The foundation for a new era of data-driven medicine has been set by recent technological advances that enable the assessment and management of human health at an unprecedented level of resolution-what we refer to as high-definition medicine. Our ability to assess human health in high definition is enabled, in part, by advances in DNA sequencing, physiological and environmental monitoring, advanced imaging, and behavioral tracking. Our ability to understand and act upon these observations at equally high precision is driven by advances in genome editing, cellular reprogramming, tissue engineering, and information technologies, especially artificial intelligence. In this review, we will examine the core disciplines that enable high-definition medicine and project how these technologies will alter the future of medicine. Copyright © 2017 Elsevier Inc. All rights reserved.

  15. LDR structural experiment definition

    Science.gov (United States)

    Russell, Richard A.; Gates, Richard M.

    1988-01-01

    A study was performed to develop the definition of a structural flight experiment for a large precision segmented reflector that would utilize the Space Station. The objective of the study was to use the Large Deployable Reflector (LDR) baseline configuration for focusing on experiment definition activity which would identify the Space Station accommodation requirements and interface constraints. Results of the study defined three Space Station based experiments to demonstrate the technologies needed for an LDR type structure. The basic experiment configurations are the same as the JPL baseline except that the primary mirror truss is 10 meters in diameter instead of 20. The primary objectives of the first experiment are to construct the primary mirror support truss and to determine its structural and thermal characteristics. Addition of the optical bench, thermal shield and primary mirror segments and alignment of the optical components occur on the second experiment. The structure will then be moved to the payload pointing system for pointing, optical control and scientific optical measurement for the third experiment.

  16. New information technologies in social studies: postnonclassical paradigm

    Directory of Open Access Journals (Sweden)

    Galina Ya. Menshikova

    2015-09-01

    Full Text Available The paper discusses topical issues of virtual reality technologies in social research, particularly when studying the processes of ethnic cultural identity, development of ethnic and racial attitudes using «virtual avatars» for managing ethnic conflicts, development of communication skills in representatives of different cultures using virtual collaboration and video conferencing. One of the key issues of the paper to discuss the necessity of post-non-classical paradigm as a conceptual framework for social research. Contemporary social studies require developing new methods, technologies and techniques at all levels of the research: from task setting to the development of new methods and result analysis. One of the most promising methods rapidly developed in recent years is virtual reality technology. The paper presents the analysis of more than 40 experimental studies performed using CAVE and HMD virtual reality systems. Their application is considered hereunder for the studies of verbal and nonverbal cues in communication, social skills training, treatment of social anxiety disorders and the development of new methods of cognitive behavioural therapy. Studies on interpersonal communication with virtual partners (i.e. «avatars» are considered. Factors affecting the communication quality of avatars, its visual and behavioural realism, problems of seeing virtual human as real partners for social interaction are discussed. Special attention is paid to the studies of racial and ethnic attitudes performed using virtual reality systems. The possibilities of practical applications of the VR technologies for shaping positive attitudes and development of communication skills in a sociocultural context are emphasized.

  17. Concept definition study of small Brayton cycle engines for dispersed solar electric power systems

    Science.gov (United States)

    Six, L. D.; Ashe, T. L.; Dobler, F. X.; Elkins, R. T.

    1980-01-01

    Three first-generation Brayton cycle engine types were studied for solar application: a near-term open cycle (configuration A), a near-term closed cycle (configuration B), and a longer-term open cycle (configuration C). A parametric performance analysis was carried out to select engine designs for the three configurations. The interface requirements for the Brayton cycle engine/generator and solar receivers were determined. A technology assessment was then carried out to define production costs, durability, and growth potential for the selected engine types.

  18. A study of the impact of technology in early education

    OpenAIRE

    Wajszczyk, Rafal

    2014-01-01

    The purpose of this study is to analyse the current state of the use of Information and communication technology (ICT) and its impact on pupils in their early stages of education. The aim is to find out how, when and in what context ICT is used in the work with students. The overall objective is to study teachers views on ICT and their opinion on how ICT does affects pupils - positively or negatively. The results of this study are based on both a literature review and a qualitative study. The...

  19. 45 CFR 170.402 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT § 170.402 Definitions. For...

  20. Politicizing science: conceptions of politics in science and technology studies.

    Science.gov (United States)

    Brown, Mark B

    2015-02-01

    This essay examines five ideal-typical conceptions of politics in science and technology studies. Rather than evaluating these conceptions with reference to a single standard, the essay shows how different conceptions of politics serve distinct purposes: normative critique, two approaches to empirical description, and two views of democracy. I discuss each conception of politics with respect to how well it fulfills its apparent primary purpose, as well as its implications for the purpose of studying a key issue in contemporary democratic societies: the politicization of science. In this respect, the essay goes beyond classifying different conceptions of politics and also recommends the fifth conception as especially conducive to understanding and shaping the processes whereby science becomes a site or object of political activity. The essay also employs several analytical distinctions to help clarify the differences among conceptions of politics: between science as 'political' (adjective) and science as a site of 'politics' (noun), between spatial-conceptions and activity-conceptions of politics, between latent conflicts and actual conflicts, and between politics and power. The essay also makes the methodological argument that the politics of science and technology is best studied with concepts and methods that facilitate dialogue between actors and analysts. The main goal, however, is not to defend a particular view of politics, but to promote conversation on the conceptions of politics that animate research in social studies of science and technology.

  1. Energy Efficient Engine: Control system preliminary definition report

    Science.gov (United States)

    Howe, David C.

    1986-01-01

    The object of the Control Preliminary Definition Program was to define a preliminary control system concept as a part of the Energy Efficient Engine program. The program was limited to a conceptual definition of a full authority digital electronic control system. System requirements were determined and a control system was conceptually defined to these requirements. Areas requiring technological development were identified and a plan was established for implementing the identified technological features, including a control technology demonstration. A significant element of this program was a study of the potential benefits of closed-loop active clearance control, along with laboratory tests of candidate clearance sensor elements for a closed loop system.

  2. Orbital transfer vehicle concept definition and system analysis study. Volume 2: OTV concept definition and evaluation. Book 1: Mission and system requirements

    Science.gov (United States)

    Kofal, Allen E.

    1987-01-01

    The mission and system requirements for the concept definition and system analysis of the Orbital Transfer Vehicle (OTV) are established. The requirements set forth constitute the single authority for the selection, evaluation, and optimization of the technical performance and design of the OTV. This requirements document forms the basis for the Ground and Space Based OTV concept definition analyses and establishes the physical, functional, performance and design relationships to STS, Space Station, Orbital Maneuvering Vehicle (OMV), and payloads.

  3. The definition of polytrauma: variable interrater versus intrarater agreement--a prospective international study among trauma surgeons.

    Science.gov (United States)

    Butcher, Nerida E; Enninghorst, Natalie; Sisak, Krisztian; Balogh, Zsolt J

    2013-03-01

    The international trauma community has recognized the lack of a validated consensus definition of "polytrauma." We hypothesized that using a subjective definition, trauma surgeons will not have substantial agreement; thus, an objective definition is needed. A prospective observational study was conducted between December 2010 and June 2011 (John Hunter Hospital, Level I trauma center). Inclusion criteria were all trauma call patients with subsequent intensive care unit admission. The study was composed of four stages as follows: (1) four trauma surgeons assessed patients until 24 hours, then coded as either "yes" or "no" for polytrauma, and results compared for agreement; (2) eight trauma surgeons representing the United States, Germany, and the Netherlands graded the same prospectively assessed patients and coded as either "yes" or "no" for polytrauma; (3) 12 months later, the original four trauma surgeons repeated assessment via data sheets to test intrarater variability; and (4) individual subjective definitions were compared with three anatomic scores, namely, (a) Injury Severity Score (ISS) of greater than 15, (b) ISS of greater 17, and (c) Abbreviated Injury Scale (AIS) score of greater than 2 in at least two ISS body regions. A total of 52 trauma patients were included. Results for each stage were as follows: (1) κ score of 0.50, moderate agreement; (2) κ score of 0.41, moderate agreement; (3) Rater 1 had moderate intrarater agreement (κ score, 0.59), while Raters 2, 3, 4 had substantial intrarater agreement (κ scores, 0.75, 0.66, and 0.71, respectively); and (4) none had most agreement with ISS of greater than 15 (κ score, 0.16), while both definitions ISS greater than 17 and Abbreviated Injury Scale (AIS) score of greater than 2 in at least two ISS body regions had on average fair agreement (κ scores, 0.27 and 0.39, respectively). Based on subjective assessments, trauma surgeons do not agree on the definition of polytrauma, with the subjective

  4. Epidemiology and outcomes of acute respiratory distress syndrome in children according to the Berlin definition: a multicenter prospective study.

    Science.gov (United States)

    Barreira, Eliane R; Munoz, Gabriela O C; Cavalheiro, Priscilla O; Suzuki, Adriana S; Degaspare, Natalia V; Shieh, Huei H; Martines, João A D S; Ferreira, Juliana C; Lane, Christianne; Carvalho, Werther B; Gilio, Alfredo E; Precioso, Alexander R

    2015-05-01

    In 2012, a new acute respiratory distress syndrome definition was proposed for adult patients. It was later validated for infants and toddlers. Our objective was to evaluate the prevalence, outcomes, and risk factors associated with acute respiratory distress syndrome in children up to 15 years according to the Berlin definition. A prospective, multicenter observational study from March to September 2013. Seventy-seven PICU beds in eight centers: two private hospitals and six public academic hospitals in Brazil. All children aged 1 month to 15 years admitted to the participating PICUs in the study period. None. All children admitted to the PICUs were daily evaluated for the presence of acute respiratory distress syndrome according to the American-European Consensus Conference and Berlin definitions. Of the 562 patients included, acute respiratory distress syndrome developed in 57 patients (10%) and 58 patients (10.3%) according to the Berlin definition and the American-European Consensus Conference definition, respectively. Among patients with acute respiratory distress syndrome according to the Berlin definition, nine patients (16%) were mild, 21 (37%) were moderate, and 27 (47%) were severe. Compared with patients without acute respiratory distress syndrome, patients with acute respiratory distress syndrome had significantly higher severity scores, longer PICU and hospital length of stay, longer duration of mechanical ventilation, and higher mortality (p < 0.001). The presence of two or more comorbidities and admission for medical reasons were associated with development of acute respiratory distress syndrome. Comparisons across the three the Berlin categories showed significant differences in the number of ventilator-free days (21, 20, and 5 d, p = 0.001) and mortality for severe acute respiratory distress syndrome (41%) in comparison with mild (0) and moderate (15%) acute respiratory distress syndrome(p = 0.02). No differences in PICU or hospital stay were

  5. Technology Evaluation Report 17. Videoconferencing in Theatre and Performance Studies

    Directory of Open Access Journals (Sweden)

    Mark Childs

    2003-04-01

    Full Text Available Previous reports in this series have indicated the growing acceptance of video-conferencing in education delivery. The current report compares a series of video-conferencing methods in an activity requiring precision of expression and communication: theatre and performance studies. The Accessing and Networking with National and International Expertise (ANNIE project is a two-year project undertaken jointly by the University of Warwick and the University of Kent at Canterbury, running from March 2001 to March 2003. The project's aim is to enhance students' learning experience in theatre studies by enabling access to research-based teaching and to workshops led by practitioners of national and international standing. Various technologies have been used, particularly ISDN video-conferencing, computer-mediated conferencing, and the Internet. This report concludes that video-conferencing methods will gain acceptance in education, as academic schools themselves are able to operate commonly available technology the assistance of specialised service units.

  6. Study of Smart Campus Development Using Internet of Things Technology

    Science.gov (United States)

    Widya Sari, Marti; Wahyu Ciptadi, Prahenusa; Hafid Hardyanto, R.

    2017-04-01

    This paper describes the development of smart campus using Internet of Things (IoT) technology. Through smart campus, it is possible that a campus is connected via online by the outside entity, so that the teaching approach based on technology can be conducted in real time. This research was conducted in smart education, smart parking and smart room. Observation and literature studies were applied as the research method with the related theme for the sake of system design of smart campus. The result of this research is the design of smart campus system that includes smart education development, smart parking and smart room with the sake of Universitas PGRI Yogyakarta as the case study.

  7. Single-cell technologies to study the immune system.

    Science.gov (United States)

    Proserpio, Valentina; Mahata, Bidesh

    2016-02-01

    The immune system is composed of a variety of cells that act in a coordinated fashion to protect the organism against a multitude of different pathogens. The great variability of existing pathogens corresponds to a similar high heterogeneity of the immune cells. The study of individual immune cells, the fundamental unit of immunity, has recently transformed from a qualitative microscopic imaging to a nearly complete quantitative transcriptomic analysis. This shift has been driven by the rapid development of multiple single-cell technologies. These new advances are expected to boost the detection of less frequent cell types and transient or intermediate cell states. They will highlight the individuality of each single cell and greatly expand the resolution of current available classifications and differentiation trajectories. In this review we discuss the recent advancement and application of single-cell technologies, their limitations and future applications to study the immune system. © 2015 The Authors. Immunology Published by John Wiley & Sons Ltd.

  8. Studies of cell biomechanics with surface micro-/nano-technology

    International Nuclear Information System (INIS)

    Wang Dong; Zhang Wei; Jiang Xingyu

    2011-01-01

    We report the recent progress in our studies of cell biology using micro-/nano-technology. Cells have a size of several to tens of microns, which makes them easily manipulated by micro-/nano-technology. The shape of the cell influences the alignment of the actin cytoskeleton, which bears the main forces of the cell, maintains the shape,and mediates a series of biochemical reactions. We invented a stretching device and studied the real-time actin filament dynamics under stretch. We found that one stretch cycle shortened the actin filaments and promoted their reassemble process. Cell migration is a complex mechanical process. We found that cell geometry determines the cell polarity and migration direction. We fabricated three-dimensional surfaces to mimic the topography in vivo, and further built a cell culture model by integrating the three-dimensional surface, microfluidics, cell patterning,and coculturing of multiple cell types. We also investigated the neuronal guidance by surface patterning. (authors)

  9. Technology Use in Elementary Education in Turkey: A Case Study

    Science.gov (United States)

    Kurt, Serhat

    2010-01-01

    Background: As countries continue to invest in technology and place educational technology in schools, teachers are expected to make use of technology in their teaching. At this point in time, we can say that technology will stay in schools. Many countries have already included the integration of technology into education in their agenda for…

  10. A Study on the Revitalizing of technology commercialization in KAERI

    International Nuclear Information System (INIS)

    Choi, J. I.; Jang, S. K.; Hong, G. P.; Lee, E. S.

    2009-02-01

    The TEC training program should be implemented for researches who want to commercialize their own technologies. To build creative organization culture is essential for technology commercialization. Collaboration strategy is related to analyze how KAERI is catching up their technological capabilities in nuclear technology, and what the success factors of KAERI in technology commercialization are.

  11. Feasibility study on the development of advanced LWR fuel technology

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Youn Ho; Sohn, D. S.; Jeong, Y. H.; Song, K. W.; Song, K. N.; Chun, T. H.; Bang, J. G.; Bae, K. K.; Kim, D. H. and others

    1997-07-01

    Worldwide R and D trends related to core technology of LWR fuels and status of patents have been surveyed for the feasibility study. In addition, various fuel cycle schemes have been studied to establish the target performance parameters. For the development of cladding material, establishment of long-term research plan for alloy development and optimization of melting process and manufacturing technology were conducted. A work which could characterize the effect of sintering additives on the microstructure of UO{sub 2} pellet has been experimentally undertaken, and major sintering variables and their ranges have been found in the sintering process of UO{sub 2}-Gd{sub 2}O{sub 3} burnable absorber pellet. The analysis of state of the art technology related to flow mixing device for spacer grid and debris filtering device for bottom nozzle and the investigation of the physical phenomena related to CHF enhancement and the establishment of the data base for thermal-hydraulic performance tests has been done in this study. In addition, survey on the documents of the up-to-date PWR fuel assemblies developed by foreign vendors have been carried out to understand their R and D trends and establish the direction of R and D for these structural components. And, to set the performance target of the new fuel, to be developed, fuel burnup and economy under the extended fuel cycle length scheme were estimated. A preliminary study on the failure mechanism of CANDU fuel, key technology and advanced coating has been performed. (author). 190 refs., 31 tabs., 129 figs.

  12. Study of the Accelerator Technology Development for Cancer Radiotherapy

    International Nuclear Information System (INIS)

    Sudjatmoko; Triyono; E-Supriyatni

    2000-01-01

    The hadronic particle beams including both protons, neutrons and charged particles have been studied for cancer therapy by a number of research centers in several countries during the past two decades. In this paper is briefly discussed concerning the accelerator type and its applications. The future trends are seen in the new technological developments like the use of proton gantries, beam scanning techniques, improved patient handling system and in the increasing precision of treatment. (author)

  13. LDR structural experiment definition

    Science.gov (United States)

    Russell, R. A.

    1988-01-01

    A system study to develop the definition of a structural flight experiment for a large precision segmented reflector on the Space Station was accomplished by the Boeing Aerospace Company for NASA's Langley Research Center. The objective of the study was to use a Large Deployable Reflector (LDR) baseline configuration as the basis for focusing an experiment definition, so that the resulting accommodation requirements and interface constraints could be used as part of the mission requirements data base for Space Station. The primary objectives of the first experiment are to construct the primary mirror support truss and to determine its structural and thermal characteristics. Addition of an optical bench, thermal shield and primary mirror segments, and alignment of the optical components, would occur on a second experiment. The structure would then be moved to the payload point system for pointing, optical control, and scientific optical measurement for a third experiment. Experiment 1 will deploy the primary support truss while it is attached to the instrument module structure. The ability to adjust the mirror attachment points and to attach several dummy primary mirror segments with a robotic system will also be demonstrated. Experiment 2 will be achieved by adding new components and equipment to experiment one. Experiment 3 will demonstrate advanced control strategies, active adjustment of the primary mirror alignment, and technologies associated with optical sensing.

  14. Effect of Disease Definition on Perceived Burden of Acute Respiratory Infections in Children: A Prospective Cohort Study Based on Symptom Diaries.

    Science.gov (United States)

    Zoch, Beate; Günther, Annette; Karch, André; Mikolajczyk, Rafael

    2017-10-01

    Acute respiratory infections (ARIs) are among the most frequent childhood diseases in Western countries. Assessment of ARI episodes for research purposes is usually based on parent-administered retrospective questionnaires or prospective symptom diaries. The aim of our analysis was to compare the effect of ARI definitions on the corresponding disease burden in a prospective cohort study using symptom diaries. A literature search was performed to identify definitions of ARI used in research studies. The definitions were applied to a symptom diary dataset from a cohort study of 1-3-year-old children conducted in the winter season 2013/2014. We compared the total number of ARI episodes, the total number of days with ARI and the median and mean duration of ARI episodes resulting from the use of the different definitions. Six ARI definitions were identified in the literature. Depending on ARI definition, the total number of ARI episodes and the total number of days with ARI in our dataset varied by a factor of 1.69 and 1.53, respectively, between the lowest and the highest. The median duration of the episodes ranged from 7 to 10 days. Different definitions led to considerable differences in the number and duration of ARI episodes, making direct comparisons of studies with different methods questionable. We propose the use of a standardized ARI definition in upcoming cohort studies working with diary data. This process could be conducted using a Delphi survey with experts in this study field.

  15. An Empirical Study of the Process of Crafting and Using Definitions

    Science.gov (United States)

    Little, Angela Jean

    2013-01-01

    In this dissertation I analyze the process of crafting definitions whose purpose is classification. The context I examine is undergraduate upper-division physical science majors defining and naming sub-categories of a physical phenomenon in the context of a design task over an extended period of time. The goal of the design task is one of…

  16. Definition dependent properties of the cortical silent period in upper-extremity muscles, a methodological study

    NARCIS (Netherlands)

    Kuijk, A.A. van; Bakker, C.D.; Hendriks, J.C.M.; Geurts, A.C.; Stegeman, D.F.; Pasman, J.W.

    2014-01-01

    BACKGROUND: To explore if stimulus-response (S-R) characteristics of the silent period (SP) after transcranial magnetic stimulation (TMS) are affected by changing the SP definition and by changing data presentation in healthy individuals. This information would be clinically relevant to predict

  17. Definition dependent properties of the cortical silent period in upper-extremity muscles, a methodological study

    NARCIS (Netherlands)

    van Kuijk, A.A.; Bakker, C,; Hendriks, J.J.A.; Geurts, A.H.; Stegeman, D.F.; Pasman, J.W.

    2014-01-01

    Background: To explore if stimulus-response (S-R) characteristics of the silent period (SP) after transcranial magnetic stimulation (TMS) are affected by changing the SP definition and by changing data presentation in healthy individuals. This information would be clinically relevant to predict

  18. Dynamics of Situation Definition

    Science.gov (United States)

    Park, Dongseop; Moro, Yuji

    2006-01-01

    Situation definition is the process and product of actors' interpretive activities toward a given situation. By reviewing a number of psychological studies conducted in experimental settings, we found that the studies have only explicated a part of the situation definition process and have neglected its dynamic aspects. We need to focus on the…

  19. Cogeneration technology alternatives study. Volume 1: Summary report

    Science.gov (United States)

    1980-01-01

    Data and information in the area of advanced energy conversion systems for industrial congeneration applications in the 1985-2000 time period was studied. Six current and thirty-one advanced energy conversion systems were defined and combined with appropriate balance-of-plant equipment. Twenty-six industrial processes were selected from among the high energy consuming industries to serve as a framework for the study. Each conversion system was analyzed as a cogenerator with each industrial plant. Fuel consumption, costs, and environmental intrusion were evaluated and compared to corresponding traditional values. Various cogeneration strategies were analyzed and both topping and bottoming (using industrial by-product heat) applications were included. The advanced energy conversion technologies indicated reduced fuel consumption, costs, and emissions. Typically fuel energy savings of 10 to 25 percent were predicted compared to traditional on-site furnaces and utility electricity. With the variety of industrial requirements, each advanced technology had attractive applications. Overall, fuel cells indicated the greatest fuel energy savings and emission reductions. Gas turbines and combined cycles indicated high overall annual cost savings. Steam turbines and gas turbines produced high estimated returns. In some applications, diesels were most efficient. The advanced technologies used coal-derived fuels, or coal with advanced fluid bed combustion or on-site gasification systems.

  20. Technological aspects of hospital communication challenges: an observational study.

    Science.gov (United States)

    Popovici, Ilinca; Morita, Plinio P; Doran, Diane; Lapinsky, Stephen; Morra, Dante; Shier, Ashleigh; Wu, Robert; Cafazzo, Joseph A

    2015-06-01

    To gain insights into how technological communication tools impact effective communication among clinicians, which is critical for patient safety. This multi-site observational study analyzes inter-clinician communication and interaction with information technology, with a focus on the critical process of patient transfer from the Emergency Department to General Internal Medicine. Mount Sinai Hospital, Sunnybrook Health Sciences Centre and Toronto General Hospital. At least five ED and general internal medicine nurses and physicians directly involved in patient transfers were observed on separate occasions at each institution. N/A. N/A. The study provides insight into clinician workflow, evaluates current hospital communication systems and identifies key issues affecting communication: interruptions, issues with numeric pagers, lack of integrated communication tools, lack of awareness of consultation status, inefficiencies related to the paper chart, unintuitive user interfaces, mixed use of electronic and paper systems and lack of up-to-date contact information. It also identifies design trade-offs to be negotiated: synchronous communication vs. reducing interruptions, notification of patient status vs. reducing interruptions and speed vs. quality of handovers. The issues listed should be considered in the design of new technology for hospital communications. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

  1. Definition of Videogames

    Directory of Open Access Journals (Sweden)

    Grant Tavinor

    2008-01-01

    Full Text Available Can videogames be defined? The new field of games studies has generated three somewhat competing models of videogaming that characterize games as new forms of gaming, narratives, and interactive fictions. When treated as necessary and sufficient condition definitions, however, each of the three approaches fails to pick out all and only videogames. In this paper I argue that looking more closely at the formal qualities of definition helps to set out the range of definitional options open to the games theorist. A disjunctive definition of videogaming seems the most appropriate of these definitional options. The disjunctive definition I offer here is motivated by the observation that there is more than one characteristic way of being a videogame.

  2. A Study on Guidelines for the Utilization of Unproven MMIS Technology In Nuclear Power Plant Application

    International Nuclear Information System (INIS)

    Kang, Sung Kon; Shin, Yeong Cheol; Bae, Byoung Hwan

    2007-01-01

    New MMIS (Man Machine Interface System) technology is rapidly advanced as digital technology provides opportunity for more functionality and better cost effectiveness and NPP (Nuclear Power Plant) operators are inclined to use the new technology for the construction of new plant and for the upgrade of existing plants. However, this new technology poses risks to the NPP operators at the same time. These risks are mainly due to the poor reliability of newly developed technology. KHNP's past experiences with the new MMIS equipment shows many cases of reliability problem. And their consequences include unintended plant trips, lowered acceptance of the new digital technology by the plant I and C maintenance crew, and increased licensing burden in answering for questions from the nuclear regulatory body. Considering the fact that the risk of these failures in the nuclear plant operation is far greater than those in other industry, utilities require proven technology for the MMIS in nuclear power plants. So that new MMIS technology might be testified as proven technology, guidelines for the utilization of unproven MMIS technology in nuclear power plant application is required for applying new advanced MMIS technology which is apparently needed to obtain a definite gain in simplicity or performance

  3. Managing knowledge: a technology transfer case study in IEN

    International Nuclear Information System (INIS)

    Pereira, Ana Gabriella Amorim Abreu

    2009-01-01

    Knowledge management is paramount nowadays. In order to enable the members of an organization to deal with their current situations effectively it is mandatory to know and enhance its intellectual capital. Managing the organization knowledge is important to the extent that it allows and reinforce its mission (what we are trying to accomplish?), and performance (how do we deliver the results?). As a result of a knowledge management effort, the organization can create value for itself and for society as a whole. In this paper, we argue that a technology developed at a research institute and transferred to an industry is knowledge to be managed in order to create value, both for the society and for the Institute. In order to manage such knowledge, it is proposed an approach to enhance the value creation potential of a technology transfer. This paper propose an investigation to expand the understanding on how a public research institute and a private firm could introduce their value creation wishes into a technology transfer agreement in a way to reflect and provide the realization of those wishes. It is proposed that, from the identification of the organizations expectations it is possible to infer which agreement attributes will contribute to that value creation and to establish satisfactory agreement configurations. These configurations have the potential to generate those consequences, given that, through the transfer, each organization seeks to increase potential benefits and to reduce potential sacrifices. Supported by exchange flow and value creation models, by the knowledge management and the means-end theory, an approach to increase the value creation potential of a technology transfer is proposed. Evidences from a case study sustain the proposed approach. The case study unity is the Instituto de Engenharia Nuclear, a public research institute. (author)

  4. Sexting and the Definition Issue.

    Science.gov (United States)

    Barrense-Dias, Yara; Berchtold, André; Surís, Joan-Carles; Akre, Christina

    2017-11-01

    Sexting among youths has become a necessary topic of interest in research because of the negative consequences that this activity could create, especially when content is shared with others. Indeed, this loss of control could lead to humiliation, (cyber)bullying, or harassment. The development of new technologies, press coverage, and increase of prevalence rates could also explain the growth of interest in sexting. However, its definition is still a gray area. This review examines the different definitions of sexting used in the literature and its correlates. Several elements of the definition of sexting were assessed: actions (sending, receiving, and forwarding); media types (text, images, and videos); sexual characteristics; and transmission modes. Nine databases were searched for studies on sexting among youths up to 18 years of age. Eighteen studies published between 2012 and 2015 were included. Prevalence rates of sexting ranged between .9% and 60% partly depending on the definition. Most studies assessed sending, but when sending and receiving were measured, prevalence rates were higher for receiving. Some articles found associations with age, gender, race, sexual behavior, romantic relationships, risky behaviors, online activity, psychological difficulties, and social pressure. Finding a consensus regarding the definition is essential to assess accurately the activity and adapt prevention. Adolescents' interpretations of the activity are important as sexting could be used as a sexual behavior between two consenting persons. Prevention strategies should focus on sexting that goes wrong when it is forwarded to a third party and when it occurs in a context of pressure or harassment. Copyright © 2017 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  5. How does leadership education shape students’ definitions of leadership? Insights from the Multi-institutional Study of Leadership

    OpenAIRE

    Kaufman, EK; Thornton, J; Coartney, J

    2017-01-01

    The Multi-institutional Study of Leadership (MSL) is an international research program focused on understanding the influences of higher education in shaping socially responsible leadership capacity and other related student outcomes. While there have been numerous reports on the quantitative findings from the MSL, the published research tends to ignore data from the qualitative prompt: “Please provide a brief definition of what the term leadership means to you.” By coding and categorizing th...

  6. Studies on Development of Space Kimchi Using Radiation Fusion Technology with Food Technology

    International Nuclear Information System (INIS)

    Lee, Ju Woon; Byun, Myung Woo; Kim, Jae Hun; Song, Beom Seok; Park, Jin Kyu; Park, Jae Nam

    2007-04-01

    Kimchi is Korean traditional fermented vegetable, it was known to one of health food through the world 5 sorts and to one of culture bequest of 100 kinds. In this study, it was conducted to development of Korean space food. Object of the study is development of food processed technology for long term storage and stability of supply at severe environment such as space, desert, deep sea. Irradiation technology is cold sterilization method, and it is able to fusion with the other food manufacturing and additives using method. Therefore, this study can offer to basic information for development of Korean space food. Side by side, it was expected that preceding results were able to wide utilization extension such as export of cured fermentation food. This study was conducted to evaluate the combined effects of additives (A), N2-packaging (N 2 ), mild heating at 60 .deg. C (HT) and gamma irradiation of 25 kGy (IR) at frozen state (F) on the shelf stability and quality of Kimchi during storage at 35 .deg. C for 30 days. Briefly, combination treatment of heat and irradiation was considered as the effective method to improve the shelf-stability of Kimchi. However, sensory quality was decreased. After all, irradiation was conducted at Kimchi samples for quality maintenance after gas exchange packaging method such as N 2 -packaging, quick freezing(-70 .deg. C). Therefore, the combination treatment was effected to insurance of shelf-life and satisfaction of quality. But other methods needed for inhibition deterioration of texture. Calcium lactate and vitamin C were added at Kimchi for prevention of softening, oleoresin paprika and artificial Kimchi flavor were added for improvement of sensory quality decreased by severe sterilization

  7. Studies on Development of Space Kimchi Using Radiation Fusion Technology with Food Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ju Woon; Byun, Myung Woo; Kim, Jae Hun; Song, Beom Seok; Park, Jin Kyu; Park, Jae Nam

    2007-04-15

    Kimchi is Korean traditional fermented vegetable, it was known to one of health food through the world 5 sorts and to one of culture bequest of 100 kinds. In this study, it was conducted to development of Korean space food. Object of the study is development of food processed technology for long term storage and stability of supply at severe environment such as space, desert, deep sea. Irradiation technology is cold sterilization method, and it is able to fusion with the other food manufacturing and additives using method. Therefore, this study can offer to basic information for development of Korean space food. Side by side, it was expected that preceding results were able to wide utilization extension such as export of cured fermentation food. This study was conducted to evaluate the combined effects of additives (A), N2-packaging (N{sub 2}), mild heating at 60 .deg. C (HT) and gamma irradiation of 25 kGy (IR) at frozen state (F) on the shelf stability and quality of Kimchi during storage at 35 .deg. C for 30 days. Briefly, combination treatment of heat and irradiation was considered as the effective method to improve the shelf-stability of Kimchi. However, sensory quality was decreased. After all, irradiation was conducted at Kimchi samples for quality maintenance after gas exchange packaging method such as N{sub 2}-packaging, quick freezing(-70 .deg. C). Therefore, the combination treatment was effected to insurance of shelf-life and satisfaction of quality. But other methods needed for inhibition deterioration of texture. Calcium lactate and vitamin C were added at Kimchi for prevention of softening, oleoresin paprika and artificial Kimchi flavor were added for improvement of sensory quality decreased by severe sterilization.

  8. "Disruptive Technologies", "Pedagogical Innovation": What's New? Findings from an In-Depth Study of Students' Use and Perception of Technology

    Science.gov (United States)

    Conole, Grainne; de Laat, Maarten; Dillon, Teresa; Darby, Jonathan

    2008-01-01

    The paper describes the findings from a study of students' use and experience of technologies. A series of in-depth case studies were carried out across four subject disciplines, with data collected via survey, audio logs and interviews. The findings suggest that students are immersed in a rich, technology-enhanced learning environment and that…

  9. Introducing technology into medical education: two pilot studies.

    Science.gov (United States)

    George, Paul; Dumenco, Luba; Dollase, Richard; Taylor, Julie Scott; Wald, Hedy S; Reis, Shmuel P

    2013-12-01

    Educators are integrating new technology into medical curriculum. The impact of newer technology on educational outcomes remains unclear. We aimed to determine if two pilot interventions, (1) introducing iPads into problem-based learning (PBL) sessions and (2) online tutoring would improve the educational experience of our learners. We voluntarily assigned 26 second-year medical students to iPad-based PBL sessions. Five students were assigned to Skype for exam remediation. We performed a mixed-method evaluation to determine efficacy. Pilot 1: Seventeen students completed a survey following their use of an iPad during the second-year PBL curriculum. Students noted the iPad allows for researching information in real time, annotating lecture notes, and viewing sharper images. Data indicate that iPads have value in medical education and are a positive addition to the curriculum. Pilot 2: Students agreed that online tutoring is at least or more effective than in-person tutoring. In our pilot studies, students experienced that iPads and Skype are beneficial in medical education and can be successfully employed in areas such as PBL and remediation. Educators should continue to further examine innovative opportunities for introducing technology into medical education. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  10. Gender in health technology assessment: pilot study on agency approaches.

    Science.gov (United States)

    Panteli, Dimitra; Zentner, Annette; Storz-Pfennig, Philipp; Busse, Reinhard

    2011-07-01

    Gender as a social construct is a recognized health determinant. Because best practice in reporting health technology assessment (HTA) clearly specifies the need to appraise a technology's social impact within the target population, the extent to which gender issues are taken into account in HTA production is of interest, not only in light of equitable practices but also for reasons of effectiveness. The aim of this study is to provide a first assessment of the degree of gender sensitivity shown by HTA agencies around the world today. The Web sites of sixty HTA agencies were analyzed. The consideration of gender aspects was specifically looked for in each agency's general mission statement, its priority setting process, and its methodological approach. Additionally, specific gender-oriented initiatives not belonging to any of the aforementioned categories were identified. Of the sixty agencies, less than half mention a commitment to addressing the social implication of health technologies. Only fifteen institutions make information on their priority setting principles available on their Web sites and gender was an issue in two of those cases. Data on methodology were obtainable online from 18 agencies, two of which mentioned gender issues explicitly. Finally, gender-oriented initiatives were identified by thirteen agencies. A gender-sensitive approach is apparently rarely adopted in current HTA production. Exceptional practices and relevant tools do exist and could serve as examples to be promoted by international collaborative networks.

  11. Esophageal transit study using a sliding sum image. Application to patients with probable and definite systemic sclerosis

    International Nuclear Information System (INIS)

    Nakajima, Kenichi; Hasegawa, Minoru; Inaki, Anri; Wakabayashi, Hiroshi; Takehara, Kazuhiko; Kinuya, Seigo; Hosoya, Tetsuo

    2011-01-01

    Esophageal complication is common in systemic sclerosis (SSc), but scintigraphic transit patterns based on each subtype have not been understood well. The aim of this study was to develop a new algorithm for integrating a dynamic esophageal transit study and to apply the method to patients with SSc. A total of 40 patients suspected of having SSc were examined by a dynamic esophageal transit study. The subtypes included 32 with definite SSc (15 limited cutaneous type and 17 diffuse cutaneous type) and 8 with probable SSc. The serial esophageal images were shifted and summed to a functional image (sliding sum image) and compared to a conventional condensed image analysis. Esophageal retention fraction at 90 s (R 90 ) and half-time (T 1/2 ) of transit were also measured. The four patterns of the sliding sum image and condensed image agreed in all patients. Abnormal retention patterns were observed in none of the 8 (0%) patients with the probable SSc and in 15 of 32 (47%) patients with definite SSc (p=0.014). The severity of scleroderma assessed by modified Rodnan skin thickness score correlated with that of esophageal retention R 90 (p=0.04). The sliding sum image is a simple and effective method for integrating esophageal transit. Patients with definite SSc and severe scleroderma had significantly higher retention patterns, while probable SSc patients showed no esophageal dysmotility. (author)

  12. A Comparative Study on Emerging Electric Vehicle Technology Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Ford, Jonathan [Sentech, Inc.; Khowailed, Gannate [Sentech, Inc.; Blackburn, Julia [Sentech, Inc.; Sikes, Karen [Sentech, Inc.

    2011-03-01

    Numerous organizations have published reports in recent years that investigate the ever changing world of electric vehicle (EV) technologies and their potential effects on society. Specifically, projections have been made on greenhouse gas (GHG) emissions associated with these vehicles and how they compare to conventional vehicles or hybrid electric vehicles (HEVs). Similar projections have been made on the volumes of oil that these vehicles can displace by consuming large amounts of grid electricity instead of petroleum-based fuels. Finally, the projected rate that these new vehicle fleets will enter the market varies significantly among organizations. New ideas, technologies, and possibilities are introduced often, and projected values are likely to be refined as industry announcements continue to be made. As a result, over time, a multitude of projections for GHG emissions, oil displacement, and market penetration associated with various EV technologies has resulted in a wide range of possible future outcomes. This leaves the reader with two key questions: (1) Why does such a collective range in projected values exist in these reports? (2) What assumptions have the greatest impact on the outcomes presented in these reports? Since it is impractical for an average reader to review and interpret all the various vehicle technology reports published to date, Sentech Inc. and the Oak Ridge National Laboratory have conducted a comparative study to make these interpretations. The primary objective of this comparative study is to present a snapshot of all major projections made on GHG emissions, oil displacement, or market penetration rates of EV technologies. From the extensive data found in relevant publications, the key assumptions that drive each report's analysis are identified and 'apples-to-apples' comparisons between all major report conclusions are attempted. The general approach that was taken in this comparative study is comprised of six primary

  13. Technology as a Time Challenge: Study, Concept and Types of Technology

    Directory of Open Access Journals (Sweden)

    Vadim M. Rozin

    2017-09-01

    Full Text Available In the article divorce the concepts of engineering and technology. Designated four stages of technological development: the fi rst phase — “pilot technique”, it is characterized by magical conceptualization, the second — engineering (rational conceptualization, third design, fourth technology. For technical equipment is characterized by four features: technology is the artifacts, the technique can be considered as a “social body” of a person or society, technology is a useful way to use the forces of nature, and fi nally, the mediation in the form of tools, machines, and material environment that allows you to implement the ideas of man. It is argued that the conceptualization of technology is the essential characteristic of the concept. If you write, for example, about the technology of the Neolithic age or era of construction of the Egyptian pyramids, then we are talking about retrospective interpretation, from the point of view of modern understanding of technology. It’s not useless, for example, to determine preconditions of formation technology, but in terms of thinking creates problems and contradictions. The author argues that technology develops in the second half of the eighteenth century as a new reality, which describes the industrial activities in language operations and their conditions of division of labor and management. At the same time, technology is being characterized by the installation of quality, savings, standardization, and rational description of the production processes, their optimization for the training of new technologists. Discusses three stages of development of the technology and features of the main types of technology: production technology, engineering, large techno-social projects, global technology. Considering the author and the conditions of the development of new technologies. These include “technological zone of proximal development”, as well as two situation — relevant issues and

  14. Study for improvement of light water reactor technology, (3)

    International Nuclear Information System (INIS)

    Suzuki, Hideaki; Morita, Terumichi; Igarashi, Hiroshi; Tabata, Hiroaki

    1991-01-01

    The Japan Atomic Power Company has performed some studies, which are referred to as 'some feasibility studies of LWR technology', in order to help improve and up-grade the light water reactor technology. We would like to show the key results of the above studies in an orderly fashion in this document. As the third issue, this paper describes the study of the feasibility of applying a suppression pool system in a 4-loop PWR plant in order to reduce containment volume and evaluates the merits of such a system. The results confirmed the feasibility of such a plant consisting of a 4-loop plant with a suppression pool system. The expected merits of a suppression pool type PWR are as follows: (1) The volume within the containment boundary is half of that for the conventional plant. This reduces the material quantity substantially. (2) A wider layout space is obtained since the operating floor is located outside the containment are. And this improves the maneuverability of plant outage. (3) Low center of gravity of the plant contributes to improving the ability to withstand seismic activity. Although there are some open items left that should be confirmed, we consider that PWR with small CV is an appealing plant in the light of further sales points such as relaxing siting conditions, extending the use of robotics and so on. (author)

  15. Crucial design issues for special access technology; a Delphi study.

    Science.gov (United States)

    O'Rourke, Pearl; Ekins, Ray; Timmins, Bernard; Timmins, Fiona; Long, Siobhan; Coyle, Eugene

    2014-01-01

    To develop and demonstrate a method to involve professional users of assistive technology (AT) in the development process of customisable products. Employing the ideas of user participation and mass customisation, this research addresses the need for reduced product costs and optimised product flexibility. An adaptable six-question Delphi study was developed to establish consensus among AT professionals on design issues relating to a specified AT domain requiring innovation. The study is demonstrated for the special access technology (SAT) domain. A modified morphological matrix structures the application of the study results to the product design process. Fourteen professionals from the Republic of Ireland and the UK participated. Consensus was reached on prevalent parts of SAT that malfunction, primary reasons for SAT malfunction, characteristics of clients associated with SAT selection, client needs regarding SAT use and training, desirable traits of SAT and clinicians' frustrations with SAT. The study revealed a range of problems related to SAT, highlighting the complexities of successful SAT adoption. The questions led to differentiated insights and enabled design solution conceptualisation from various perspectives. The approach was found to help facilitate efficient generation and application of professional users' knowledge during the design process of customisable AT.

  16. Enabling Logistics With Portable and Wireless Technology Study. Volume 1

    Science.gov (United States)

    2004-08-06

    Players41 Tag Vendors Reader Vendors Software Players Early Adopters Alien Technology Corporation Intermec Technologies Corp. Descartes Systems...e at pa ion rt s s /st be an co d m ar e ds s rene l availability of interopera le s e demands of EPC isc ot a bro f a er b labl as te is, c...Intermec Technologies Corp. Descartes Systems Boeing Intermec Technologies Corp. Matrics Inc. EXE Technologies CHEP Matrics Inc. Psion Teklogix Inc

  17. Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 2: System engineering, cost and programmatics

    Science.gov (United States)

    Hanley, G. M.

    1979-01-01

    Volume 2, Part 2, of a seven volume Satellite Power Systems (SPS) report is presented. Part 2 covers cost and programmatics and is divided into four sections. The first section gives illustrations of the SPS reference satellite and rectenna concept, and an overall scenario for SPS space transportation involvement. The second section presents SPS program plans for the implementation of PHASE C/D activities. These plans describe SPS program schedules and networks, critical items of systems evolution/technology development, and the natural resources analysis. The fourth section presents summary comments on the methods and rationale followed in arriving at the results documented. Suggestions are also provided in those areas where further analysis or evaluation will enhance SPS cost and programmatic definitions.

  18. A Study on Test Technology to Diagnose the Power Apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K H; Kang, Y S; Jeon, Y K; Lee, W Y; Kang, D S; Kyu, H S; Sun, J H; Jo, K H [Korea Electrotechnology Research Institute (Korea, Republic of); Jung, J S; Mun, Y T; Lee, K H; Jung, E H; Kim, J H [Korea Water Resources Corporation (Korea, Republic of)

    1997-02-01

    In this study, we have educated KOWACO(Korea Water Resources Corporation) specialists about the insulation diagnostic technology and trained them the insulation diagnostic test and estimation method of power apparatus. The main results of this study are as follows; A. Education of basic high-voltage engineering. B. Research of insulation characteristic and deterioration mechanism in power apparatus C. Discussion on high-voltage test standard specifications. D. Study on insulation deterioration diagnostics in power apparatus. E. Field testing of insulation diagnosis in power apparatus. F. Engineering of insulation diagnostic testing apparatus to diagnose power apparatus. KOWACO specialists are able to diagnose insulation diagnostic test of power apparatus through this study. As they have instruments to diagnose power apparatus, they can do the test and estimation of the power apparatus insulation diagnosis. (author). refs., figs., tabs.

  19. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  20. Definition of a facility for experimental studies of two-phase flows and heat transfer in porous materials

    International Nuclear Information System (INIS)

    Reda, D.C.; Eaton, R.R.

    1981-01-01

    A facility-development effort is currently underway at Sandia National Laboratories in order to create an experimental capability for the study of two-phase, steam/water flows through a variety of porous media. The facility definition phase of this project is described. Equations are derived for the steady, adiabatic, macroscopically-linear two-phase flow of a single-component fluid through a porous medium, including energy transfer both by convection and conduction. These equations are then solved to give relative permeabilities for the steam and water phases as functions of known and/or measurable quantities. A viable experimental approach was thereby formulated, leading to the definition of facility components and instrumentation requirements, including the application of gamma-beam densitometry for the measurement of liquid-saturation distributions in porous media. Finally, a state-of-the-art computer code was utilized to numerically simulate the proposed experiments, providing an estimate of the facility operating envelope

  1. Time to definitive diagnosis of breast cancer in Latina and non-Hispanic white women: the six cities study.

    Science.gov (United States)

    Ramirez, Amelie G; Pérez-Stable, Eliseo J; Talavera, Gregory A; Penedo, Frank J; Carrillo, J Emilio; Fernandez, Maria E; Muñoz, Edgar; Long Parma, Dorothy; Holden, Alan Ec; San Miguel de Majors, Sandra; Nápoles, Anna; Castañeda, Sheila F; Gallion, Kipling J

    2013-12-01

    Time delay after an abnormal screening mammogram may have a critical impact on tumor size, stage at diagnosis, treatment, prognosis, and survival of subsequent breast cancer. This study was undertaken to evaluate disparities between Latina and non-Hispanic white (NHW) women in time to definitive diagnosis of breast cancer after an abnormal screening mammogram, as well as factors contributing to such disparities. As part of the activities of the National Cancer Institute (NCI)-funded Redes En Acción research network, clinical records of 186 Latinas and 74 NHWs who received abnormal screening mammogram results were reviewed to determine the time to obtain a definitive diagnosis. Data was obtained from participating clinics in six U.S. cities and included demographics, clinical history, and mammogram characteristics. Kaplan-Meier estimates and Cox proportional hazards models were used to test differences in median time to definitive diagnosis by ethnicity after adjusting for clinic site, demographics, and clinical characteristics. Time-to-event analysis showed that Latinas took 2.2 times longer to reach 50% definitively diagnosed with breast cancer relative to NHWs, and three times longer to reach 80% diagnosed (p=0.001). Latinas' median time to definitive diagnosis was 60 days compared to 27 for NHWs, a 59% gap in diagnosis rates (adjusted Hazard Ratio [aHR] = 1.59, 95% CI = 1.09, 2.31; p=0.015). BI-RADS-4/5 women's diagnosis rate was more than twice that of BI-RADS-3 (aHR = 2.11, 95% CI = 1.18, 3.78; p=0.011). Disparities in time between receipt of abnormal screening result and definitive diagnosis adversely affect Latinas compared to NHWs, and remain significant after adjusting for demographic and clinical variables. With cancer now the leading cause of mortality among Latinos, a greater need exists for ethnically and culturally appropriate interventions like patient navigation to facilitate Latinas' successful entry into, and progression through, the cancer care

  2. A critical study on the IAEA definition of high level radioactive waste unsuitable for dumping at sea

    International Nuclear Information System (INIS)

    Miyake, Yasuo; Saruhashi, Katsuko.

    1976-01-01

    The definition of high level radioactive waste and other high level radioactive matter not suitable for dumping at sea has been given by IAEA (1975). Since this definition is based on the report by Webb and Morley (1973), a critical study is made on their report. The result of study shows that owing to the assumption of a very small value of the horizontal eddy diffusion coefficient (10 4 cm 2 /s) for the sake of safety for these nuclides, the limiting environmental capacity for such nuclides as 226 Ra and 239 Pu with longer half-lives is extremely overestimated. And due to a very small value of a daily intake of marine foods (6 g/d) and a larger value of the ratio of nuclidic concentrations between the top of the deep layer and the surface layer (100), the environmental capacity is also overestimated for every nuclide. It is proposed that the definition of high level radioactive waste should be reassessed carefully by experts in various countries. (auth.)

  3. REVIEW OF EXISTING LCA STUDIES ON WASTE WATER TREATMENT TECHNOLOGIES

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred; Hauschild, Michael Zwicky

    The EU research project “NEPTUNE” is related to the EU Water Framework Directive and focused on the development of new waste water treatment technologies (WWTT) for municipal waste water. The sustainability of these WWTTs is going to be assessed by the use of life cycle assessment (LCA). New life...... importance of the different life cycle stages and the individual impact categories in the total impact from the waste water treatment, and the degree to which micropollutants, pathogens and whole effluent toxicity have been included in earlier studies. The results show that more than 30 different WWTT (and...

  4. Engineering Definitional Interpreters

    DEFF Research Database (Denmark)

    Midtgaard, Jan; Ramsay, Norman; Larsen, Bradford

    2013-01-01

    A definitional interpreter should be clear and easy to write, but it may run 4--10 times slower than a well-crafted bytecode interpreter. In a case study focused on implementation choices, we explore ways of making definitional interpreters faster without expending much programming effort. We imp...

  5. The role of nuclear data for fusion technology studies

    International Nuclear Information System (INIS)

    Forrest, Robin A.

    2011-01-01

    Highlights: → Nuclear data are of fundamental importance in studies of nuclear technology. → Data libraries cover: experiments (EXFOR), theory (RIPL) and evaluations (ENDF). → Libraries are general purpose or special purpose (decay, dosimetry and activation). → Activation files contain many reactions, only a fraction needs to be known precisely. → Covariance data are important, but details of formatting are being worked out. - Abstract: Nuclear data are of fundamental importance in studies of nuclear technology. In these studies, experiments to measure cross sections and decay properties and simulations of the design of fission power plants, fusion devices and accelerators are included. The large amount of data required is stored in computer readable formats in data libraries and the most common of these are the general purpose files used for neutronics or transport calculations. These files also contain the standards against which most measurements are made. The other class of libraries are the special purpose ones containing decay data, fission yields and cross section data for dosimetry and activation. This paper gives examples of what data are available and describes their use for various fusion applications. The focus will be on neutron-induced activation data with examples of how the reactions of particular importance can be identified. All data should be accompanied by estimates of the uncertainty. This is best achieved by including covariance data; however, this is extremely challenging and only a subset of the available data has such uncertainty data. The general principles of how covariance matrices are used are outlined.

  6. Technology and the study of wildfire: Middle school students study the impacts of wildfire

    Science.gov (United States)

    Fox-Gliessman, D.; Kerski, J.J.

    2005-01-01

    Various technologies that can assist students in exploring the human and environmental impacts of wildfire and in communicating their findings are discussed. Wildfires occur in many parts of the world, and provide an excellent opportunity for students to study local and global interdisciplinary issues using technology. Prior to the beginning of the field study, students take instructions in both their math and science classes about the distinction and appropriate uses of quantitative and qualitative data. Use of computer programs such as Excel spreadsheets which can contain data, and interaction of research and technology group with students, can help them collect best of the information and in making an accurate report.

  7. Effective Information Technology Governance Mechanisms: An Australian Study

    Directory of Open Access Journals (Sweden)

    Syaiful Ali

    2006-01-01

    Full Text Available Growing importance of information technology (IT, as a strategic factor for organizations in achieving their objectives, have raised the concern of organizations in establishing and implementing effective IT governance. This study seeks to empirically examine the individual IT governance mechanisms that influence the overall effectiveness of IT governance. The data were obtained by using web based survey from 176 members of ISACA (Information Systems and Audit Control Association Australia. This study examines the influences of six proposed IT governance mechanisms on the overall effectiveness of IT governance. Using Factor Analysis and Multiple Regression techniques, the current study finds significant positive relationships between the overall level of effective IT governance and the following four IT governance mechanisms: the existence of ethics/ culture of compliance in IT, corporate communication systems, an IT strategy committee, and the involvement of senior management in IT.

  8. Technological feasibility studies on combination treatments for subtropical fruits

    International Nuclear Information System (INIS)

    Brodrick, H.T.; Linde, H.J. van der

    1981-01-01

    Research with subtropical fruits such as papayas and mangoes had advanced beyond the experimental stage in South Africa. This may be attributed to the potential economic benefits likely to be obtained from the combination of heat and irradiation treatments. The outcome of recent marketing trials, however, revealed several problem areas which need further investigation. Some of these problems were studied in greater detail and are reported in this presentation. The effect of time delays between hot-water and irradiation treatments on the efficacy in disease control in the fruit, has received particular attention in the investigations. Efforts have also been made to correlate these results with those obtained in fungal studies in the laboratory. These and other factors relating to the technological feasibility in the use of combined treatments for the preservation of mangoes and papayas are discussed and recommendations or guidelines for future studies are given in this paper. (author)

  9. Defining technology dependence in children and adolescents.

    Science.gov (United States)

    Spratling, Regena

    2015-05-01

    The purpose of this review was to identify current terms and definitions used to identify and describe children and adolescents who require technology. A total of 400 articles published from January 2000 through May 2012 were reviewed; 26 articles met the inclusion criteria. The review included only primary research studies that focused on a child and adolescent sample (birth to 18 years old) who required technology. Current terms and definitions used to describe children and adolescents who require technology include technology and complex care. Technology is a constant in both terminology and definitions, and it differentiates this population from the general population of children with chronic illness and special health care needs. This review highlights the need for better, more detailed descriptions of the population of children and adolescents who require technology in their daily lives. © The Author(s) 2014.

  10. Commercialization of new energy technologies. Appendix A. Case study 1: central station electric power generation technologies

    International Nuclear Information System (INIS)

    1976-06-01

    The results of a survey on Technologies for Central Power Generation are presented. The central power generation technologies selected for consideration were: fusion; breeder reactors; solar electric (thermal); geothermal; and magnetohydrodynamics. The responses of industry executives who make key investment decisions concerning new energy technologies and who to identify the problems faced in the development and commercialization of new energy systems are presented. Evaluation of these responses led to the following recommendations: increase industry input into the R, D and D planning process; establish and advocate priorities for new technologies based on detailed analysis of a technology's value in terms of overall national goals; create a mechanism for a joint ERDA/industry appraisal of priorities and programs; increase level of federal funding or subsidy of new technology demonstrations; and focus the activities of the national laboratories on basic research and very early product development; and emphasize industry involvement in systems development

  11. A Study on the Linkage between Nano Fusion Technology and Nuclear Technology

    International Nuclear Information System (INIS)

    Jeong, Ik; Lim, Chae Young; Lee, Jong Hee

    2009-02-01

    1) A survey of national energy policy trends in major nation - to secure renewal energy in the level of making a plan to supply national energy in the future - Tendency of energy policy based on Europe 2) A survey of the nano technology development - Status of major nano technology development - Developmental direction of nano technology related to nuclear energy 3) the nano technology development related with nuclear - high-temperature nuclear reactor by applying nano science and technology under quick development - materials required to high-level radioactive wastes treatment facility - develop materials of nuclear fusion facility in the long-term view 4) Innovation system of nano technology - Energy source -> conversion to energy -> distribution of energy -> energy storage -> energy use

  12. Political construction of technology

    International Nuclear Information System (INIS)

    Bruheze, A.A.A. de la.

    1992-01-01

    In the 1970s radioactive waste disposal became a controversial scientific and social issue in the United States, after the US Atomic Energy Commission (AEC) charged with the development, regulation and promotion of nuclear technology, had tried to implement its disposal technology near Lyons, Kansas. This study traces the emergence of this controversy as part of the long-term development of the US radioactive waste disposal technology. Radioactive waste was not always considered a problem, and different meanings were attached to radwaste in the 1940s and early 1950s. Problem definitions and technical designs that underlaid this technology can be reconstructed, and its possible to show how some definitions received attention and others not, and how some became, and remained, dominant. During the process of problem definition, views compete, agendas are built, resources are allocated, and boundaries are created and maintained between 'inside' and 'outside world'. This is a political process, and by heuristically using concepts from political science and recent technology studies, the Political Construction of US radioactive waste disposal technologically can be reconstructed. (author). 301 refs.; 3 figs.; 15 tabs

  13. Miniaturized Power Processing Unit Study: A Cubesat Electric Propulsion Technology Enabler Project

    Science.gov (United States)

    Ghassemieh, Shakib M.

    2014-01-01

    This study evaluates High Voltage Power Processing Unit (PPU) technology and driving requirements necessary to enable the Microfluidic Electric Propulsion technology research and development by NASA and university partners. This study provides an overview of the state of the art PPU technology with recommendations for technology demonstration projects and missions for NASA to pursue.

  14. Water Desalination Studies Using Forward Osmosis Technology, A Review

    International Nuclear Information System (INIS)

    Abou El-Nour, F.H.

    2016-01-01

    Fresh water and energy shortage represent a great challenge facing the whole world now. To cover the global water demand, an energy-efficient approach is required to be applied in the suitable technology to achieve the shortage in the fresh water demand. Different techniques are used to solve this problem. A mong the different methods applied to desalinate seawater is the osmosis technologies . Although reversible osmosis (RO) is the most familiar method used for this purpose, forward osmosis (FO) represents a more suitable technique due to several arguments including low energy cost. The present study represents the use of FO technique for water desalination with adsorption regeneration. In this respect, a self-prepared granular active carbon produced from dates is to be used as an adsorbent agent. The physical characteristics of the active carbon are studied such as BET specific surface area, pore size, particle size and the structure using scanning electron microscope (SEM). Different advanced apparatus are used for such measurements. In addition, the adsorption is otherms (Langmuier and Freundlich) are established to explain the adsorption mechanism of the process. Accordingly, the review includes essential information and sufficient backgrounds in the field of desalination using FO or simply direct osmosis, which overcome the different difficulties present in reversible RO

  15. Study and practice of flipped classroom in optoelectronic technology curriculum

    Science.gov (United States)

    Shi, Jianhua; Lei, Bing; Liu, Wei; Yao, Tianfu; Jiang, Wenjie

    2017-08-01

    "Flipped Classroom" is one of the most popular teaching models, and has been applied in more and more curriculums. It is totally different from the traditional teaching model. In the "Flipped Classroom" model, the students should watch the teaching video afterschool, and in the classroom only the discussion is proceeded to improve the students' comprehension. In this presentation, "Flipped Classroom" was studied and practiced in opto-electronic technology curriculum; its effect was analyzed by comparing it with the traditional teaching model. Based on extensive and deep investigation, the phylogeny, the characters and the important processes of "Flipped Classroom" are studied. The differences between the "Flipped Classroom" and the traditional teaching model are demonstrated. Then "Flipped Classroom" was practiced in opto-electronic technology curriculum. In order to obtain high effectiveness, a lot of teaching resources were prepared, such as the high-quality teaching video, the animations and the virtual experiments, the questions that the students should finish before and discussed in the class, etc. At last, the teaching effect was evaluated through analyzing the result of the examination and the students' surveys.

  16. Blind Technology Transfer or Technological Knowledge Leakage: a Case Study from the South

    Directory of Open Access Journals (Sweden)

    Dario Codner

    2012-07-01

    Full Text Available Blurring boundaries between science and technology is a new phenomenon especially in fields such as biotechnology. The present work shows the fate of biotech research papers on foreign patents produced during the last decade in Quilmes National University. It aims at recognizing the flow of scientific knowledge developed at a public university towards foreign companies and organizations as well as reflecting on its technological value, the role of technology transfer management, the institutional significance of technology transfer processes and the need to develop innovative public policies for solving structural failures caused by industrial underdevelopment

  17. A comparative study of standard vs. high definition colonoscopy for adenoma and hyperplastic polyp detection with optimized withdrawal technique.

    Science.gov (United States)

    East, J E; Stavrindis, M; Thomas-Gibson, S; Guenther, T; Tekkis, P P; Saunders, B P

    2008-09-15

    Colonoscopy has a known miss rate for polyps and adenomas. High definition (HD) colonoscopes may allow detection of subtle mucosal change, potentially aiding detection of adenomas and hyperplastic polyps. To compare detection rates between HD and standard definition (SD) colonoscopy. Prospective, cohort study with optimized withdrawal technique (withdrawal time >6 min, antispasmodic, position changes, re-examining flexures and folds). One hundred and thirty patients attending for routine colonoscopy were examined with either SD (n = 72) or HD (n = 58) colonoscopes. Groups were well matched. Sixty per cent of patients had at least one adenoma detected with SD vs. 71% with HD, P = 0.20, relative risk (benefit) 1.32 (95% CI 0.85-2.04). Eighty-eight adenomas (mean +/- standard deviation 1.2 +/- 1.4) were detected using SD vs. 93 (1.6 +/- 1.5) with HD, P = 0.12; however more nonflat, diminutive (9 mm) hyperplastic polyps was 7% (0.09 +/- 0.36). High definition did not lead to a significant increase in adenoma or hyperplastic polyp detection, but may help where comprehensive lesion detection is paramount. High detection rates appear possible with either SD or HD, when using an optimized withdrawal technique.

  18. Technology Leadership of Education Administrators and Innovative Technologies in Education: A Case Study of Çorum City

    Science.gov (United States)

    Kör, Hakan; Erbay, Hasan; Engin, Melih

    2016-01-01

    In this global world in which educational technologies have developed at such a great pace, it is possible to say that administrators in the education sector are obliged with serious roles with regard to keeping up with the evolving technology and the management of education in this virtual environment. In the present study utilizing screening…

  19. The diffusion of medical technology, local conditions, and technology re-invention: a comparative case study on coronary stenting.

    Science.gov (United States)

    Hashimoto, Hideki; Noguchi, Haruko; Heidenreich, Paul; Saynina, Olga; Moreland, Abigail; Miyazaki, Shunichi; Ikeda, Shunya; Kaneko, Yoshihiro; Ikegami, Naoki

    2006-12-01

    Innovation of medical technology is a major driving force behind the increase in medical expenditures in developed countries. Previous studies identified that the diffusion of medical technology varied across countries according to the characteristics of regulatory policy and payment systems. Based on Roger's diffusion of innovation theory, this study purported to see how local practice norms, the evolving nature of diffusing technology, and local clinical needs in addition to differences in politico-economic systems would affect the process of innovation diffusion. Taking a case of coronary stenting, an innovative therapeutic technology in early 1990s, we provided a case study of hospital-based data between two teaching high-tech hospitals in Japan and the US for discussion. Stenting began to be widely used in both countries when complementary new technology modified its clinical efficacy, but the diffusion process still differed between the two hospitals due to (1) distinctive payment systems for hospitals and physicians, (2) practice norms in favor of percutaneous intervention rather than bypass surgery that was shaped by payment incentives and cultural attitudes, and (3) local patient's clinical characteristics that the technology had to be tailored for. The case study described the diffusion of stent technology as a dynamic process between patients, physicians, hospitals, health care systems, and technology under global and local conditions.

  20. A preliminary study of current multimedia information technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J.C.

    1997-03-01

    This paper surveys more than 70 articles published in the IEEE Multimedia journal and other journals. The survey summarizes aspects of multimedia information technology and categorizes application areas of multimedia information technology and interesting research areas related to it.

  1. High-Definition Computed Tomography for Coronary Artery Stent Imaging: a Phantom Study

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Wen Jie; Chen, Ke Min; Pang, Li Fang; Zhang, Huang; Pan, Zi Lai [Rui Jin Hospital, Medical School, Shanghai Jiao Tong University, Shangha (China); Guo, Ying; Li, Jian Ying [Beijing Economic and Technology Development Area, Beijing (China)

    2012-01-15

    To assess the performance of a high-definition CT (HDCT) for imaging small caliber coronary stents ({<=} 3 mm) by comparing different scan modes of a conventional 64-row standard-definition CT (SDCT). A cardiac phantom with twelve stents (2.5 mm and 3.0 mm in diameter) was scanned by HDCT and SDCT. The scan modes were retrospective electrocardiography (ECG)-gated helical and prospective ECG-triggered axial with tube voltages of 120 kVp and 100 kVp, respectively. The inner stent diameters (ISD) and the in-stent attenuation value (AVin-stent) and the in-vessel extra-stent attenuation value (AVin-vessel) were measured by two observers. The artificial lumen narrowing (ALN = [ISD - ISDmeasured]/ISD) and artificial attenuation increase between in-stent and in-vessel (AAI = AVin-stent - AVin-vessel) were calculated. All data was analyzed by intraclass correlation and ANOVA-test. The correlation coefficient of ISD, AVin-vessel and AVin-stent between the two observers was good. The ALNs of HDCT were statistically lower than that of SDCT (30 {+-} 5.7% versus 35 {+-} 5.4%, p < 0.05). HDCT had statistically lower AAI values than SDCT (15.7 {+-} 81.4 HU versus 71.4 {+-} 90.5 HU, p < 0.05). The prospective axial dataset demonstrated smaller ALN than the retrospective helical dataset on both HDCT and SDCT (p < 0.05). Additionally, there were no differences in ALN between the 120 kVp and 100 kVp tube voltages on HDCT (p = 0.05). High-definition CT helps improve measurement accuracy for imaging coronary stents compared to SDCT. HDCT with 100 kVp and the prospective ECG-triggered axial technique, with a lower radiation dose than 120 kVp application, may be advantageous in evaluating coronary stents with smaller calibers ({<=} 3 mm).

  2. Cleaner technology diffusion: case studies, modeling and policy. Editorial

    NARCIS (Netherlands)

    Montalvo Corral, C.; Kemp, R.

    2008-01-01

    The development and application of cleaner technologies (environmental technologies) offer multiple benefits for the adopter: reduced emissions, less waste and cost savings from reduced resource use and savings on waste costs. The question here is: if cleaner technologies offer such great benefits

  3. Technology Use in a Japanese Immersion School: A Case Study.

    Science.gov (United States)

    Ketterer, Kimberley; Giannone, Darby

    1996-01-01

    Examines the uses of technology at Yujin Gakuen, a public elementary-level Japanese language immersion school located in Eugene, Oregon. Discusses goals that can be achieved through cooperative learning and instructional technology use, equipment and software, areas in which technology training and integration takes place, the role of educators,…

  4. Repenser la définition des aides techniques en éducation / Rethinking the definition of assistive technology in education

    Directory of Open Access Journals (Sweden)

    Hajer Chalghoumi

    2012-11-01

    Full Text Available En éducation, un nombre croissant d’élèves avec incapacités ont recours aux aides techniques. Parallèlement, une littérature récente mais de plus en plus abondante étudie ce concept. En dépit de cet intérêt grandissant tant au niveau de la recherche que de la pratique liée à ces technologies, plusieurs indices soulignent la difficulté de distinguer entre ce concept et celui de technologies de l’information et de la communication (TIC notamment en éducation. Les aides techniques sont-elles un concept distinct ou une variante des TIC? Quelles sont les conséquences d’une telle confusion conceptuelle ? Comment peut-on différencier ces deux concepts ? L’objectif du présent article est d’apporter des éléments de réponse à ces questions. In education, an increasing number of students with disabilities make use of assistive technologies (AT. Meanwhile, a recent but growing literature studies this concept. Despite this interest both in research and practice related to these technologies, several clues point to the difficulty of distinguishing it from and the information and communication technology (ICT, particularly in education. Are AT a distinct concept or a variation of ICT? What are the consequences of such a confusion? How can we differentiate these two concepts? The purpose of this article is to provide some answers to these questions.

  5. Practice Theory and Pragmatism in Science & Technology Studies

    DEFF Research Database (Denmark)

    Buch, Anders

    2015-01-01

    begin by an introduction to some of the proponents of practice theory and of pragmatism. Regarding the latter, I primarily present work by Dewey because this is what I am most familiar with. Although I recognize that practice theory and pragmatism differ on fundamental philosophical issues in relation...... to the normative evaluation of action, I show that the two intellectual traditions have much in common when it comes to what they do to STS studies. After this introduction to practice theory, my paper will proceed in the following steps. Firstly, I will briefly survey practice theoretical and pragmatist......Science & Technology Studies (STS) and social science has made a turn, a ‘practice turn’, and the notion ‘practice theory’ has made its way into the field of STS. But it is notable that proponents of this turn and theory rarely mention American pragmatism as a source of inspiration or refer...

  6. [Study on extraction and purification technology of Hubei ophiopogon saponins].

    Science.gov (United States)

    Lin, Yun-Han; Li, Chong-Ming; Li, Xiao-Dong; Xiang, Yang; Zhang, Ya-Qin; Zhang, Xiao-Cun; Liu, Xia

    2013-05-01

    To explore the extraction and purification technology of total saponins from the effective parts of Liriope spicata. Orthogonal design was used. Macroporous resin was selected to separate and purify total saponin from the effective parts of Liriope spicata. The process validation was conducted. The total saponins was determined by Ultraviolet Spectrophotometry. The optimal extraction conditions were as follows: 10 times the amount of ethanol (70%) for each occasion and hot reflux (3 x 2 h). Total saponins was purified by D101 macroporous resin. The concentration of eluting ethanol was 50% - 70%. Ethanol (70%) was selected as the best eluent. The result of process validation was consistent with the study. The process is simple and stable enough to significantly improve the extraction rate of the effective parts. The study can provide reference for the research and production of effective parts of traditional Chinese medicine such as Liriope spicata.

  7. Nuclear Criticality Technology and Safety Project parameter study database

    International Nuclear Information System (INIS)

    Toffer, H.; Erickson, D.G.; Samuel, T.J.; Pearson, J.S.

    1993-03-01

    A computerized, knowledge-screened, comprehensive database of the nuclear criticality safety documentation has been assembled as part of the Nuclear Criticality Technology and Safety (NCTS) Project. The database is focused on nuclear criticality parameter studies. The database has been computerized using dBASE III Plus and can be used on a personal computer or a workstation. More than 1300 documents have been reviewed by nuclear criticality specialists over the last 5 years to produce over 800 database entries. Nuclear criticality specialists will be able to access the database and retrieve information about topical parameter studies, authors, and chronology. The database places the accumulated knowledge in the nuclear criticality area over the last 50 years at the fingertips of a criticality analyst

  8. LD Definition.

    Science.gov (United States)

    Learning Disability Quarterly, 1987

    1987-01-01

    The position paper (1981) of the National Joint Committee on Learning Disabilities presents a revised definition of learning disabilities and identifies issues and concerns (such as the limitation to children and the exclusion clause) associated with the definition included in P.L. 94-142, the Education for All Handicapped Children Act. (DB)

  9. The Adoption of Grid Computing Technology by Organizations: A Quantitative Study Using Technology Acceptance Model

    Science.gov (United States)

    Udoh, Emmanuel E.

    2010-01-01

    Advances in grid technology have enabled some organizations to harness enormous computational power on demand. However, the prediction of widespread adoption of the grid technology has not materialized despite the obvious grid advantages. This situation has encouraged intense efforts to close the research gap in the grid adoption process. In this…

  10. Study on mineral processing technology for abrasive minerals

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Seong Woong; Yang, Jung Il; Hwang, Seon Kook; Choi, Yeon Ho; Cho, Ken Joon; Shin, Hee Young [Korea Inst. of Geology Mining and Materials, Taejon (Korea, Republic of)

    1995-12-01

    Buyeo Materials in Buyeogun, Choongnam province is a company producing feldspar concentrate, but does not yet utilize the garnet as abrasive material and other useful heavy minerals wasted out from the process of feldspar ore. The purpose of this study is to develop technology and process for the recovery of garnet concentrate. As results, the garnet is defined as ferro manganese garnet. The optimum process for recovery of garnet concentrate is to primarily concentrate heavy minerals from tailings of feldspar processing. And secondly the heavy minerals concentrated is dried and separated garnet concentrate from other heavy minerals. At this time, the garnet concentrate is yield by 0.176%wt from 0.31%wt of heavy minerals in head ore. The garnet concentrate contains 33.35% SiO{sub 2}, 12.20% Al{sub 2}O{sub 3}, 28.47% Fe{sub 2}O{sub 3}, 11.96% MnO. As for utilization of abrasive materials, a fundamental data was established on technology of grinding and classification. (author). 13 refs., 47 figs., 24 tabs.

  11. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  12. Impact of Collaborative Work on Technology Acceptance: A Case Study from Virtual Computing

    Directory of Open Access Journals (Sweden)

    Abdullah Konak

    2016-12-01

    Findings\tThe findings of the study supported that collaborative work could improve non-technology students’ acceptance of RVCLs. However, no significant effect of collaborative work on technology acceptance was observed in the case of technology students. Recommendations for Practitioners\tEducators should consider the benefits of collaborative work while introducing a new technology to students who may not have background in the technology introduced. Recommendation for Researchers In this study, student technological background was found to be a significant factor for technology acceptance; hence, it is recommended that technological background is included in TAM studies as an external factor. Future Research\tRepeating similar studies with multiple exercises with varying degrees of challenge is required for a better understanding of how collaborative work and student technological background affect technology acceptance.

  13. Effectiveness of evaluating tumor vascularization using 3D power Doppler ultrasound with high-definition flow technology in the prediction of the response to neoadjuvant chemotherapy for T2 breast cancer: a preliminary report.

    Science.gov (United States)

    Shia, Wei-Chung; Chen, Dar-Ren; Huang, Yu-Len; Wu, Hwa-Koon; Kuo, Shou-Jen

    2015-10-07

    The aim of this study was to evaluate the effectiveness of advanced ultrasound (US) imaging of vascular flow and morphological features in the prediction of a pathologic complete response (pCR) and a partial response (PR) to neoadjuvant chemotherapy for T2 breast cancer.Twenty-nine consecutive patients with T2 breast cancer treated with six courses of anthracycline-based neoadjuvant chemotherapy were enrolled. Three-dimensional (3D) power Doppler US with high-definition flow (HDF) technology was used to investigate the blood flow in and morphological features of the tumors. Six vascularity quantization features, three morphological features, and two vascular direction features were selected and extracted from the US images. A support vector machine was used to evaluate the changes in vascularity after neoadjuvant chemotherapy, and pCR and PR were predicted on the basis of these changes.The most accurate prediction of pCR was achieved after the first chemotherapy cycle, with an accuracy of 93.1% and a specificity of 85.5%, while that of a PR was achieved after the second cycle, with an accuracy of 79.31% and a specificity of 72.22%.Vascularity data can be useful to predict the effects of neoadjuvant chemotherapy. Determination of changes in vascularity after neoadjuvant chemotherapy using 3D power Doppler US with HDF can generate accurate predictions of the patient response, facilitating early decision-making.

  14. Effectiveness of evaluating tumor vascularization using 3D power Doppler ultrasound with high-definition flow technology in the prediction of the response to neoadjuvant chemotherapy for T2 breast cancer: a preliminary report

    International Nuclear Information System (INIS)

    Shia, Wei-Chung; Chen, Dar-Ren; Huang, Yu-Len; Wu, Hwa-Koon; Kuo, Shou-Jen

    2015-01-01

    The aim of this study was to evaluate the effectiveness of advanced ultrasound (US) imaging of vascular flow and morphological features in the prediction of a pathologic complete response (pCR) and a partial response (PR) to neoadjuvant chemotherapy for T2 breast cancer.Twenty-nine consecutive patients with T2 breast cancer treated with six courses of anthracycline-based neoadjuvant chemotherapy were enrolled. Three-dimensional (3D) power Doppler US with high-definition flow (HDF) technology was used to investigate the blood flow in and morphological features of the tumors. Six vascularity quantization features, three morphological features, and two vascular direction features were selected and extracted from the US images. A support vector machine was used to evaluate the changes in vascularity after neoadjuvant chemotherapy, and pCR and PR were predicted on the basis of these changes.The most accurate prediction of pCR was achieved after the first chemotherapy cycle, with an accuracy of 93.1% and a specificity of 85.5%, while that of a PR was achieved after the second cycle, with an accuracy of 79.31% and a specificity of 72.22%.Vascularity data can be useful to predict the effects of neoadjuvant chemotherapy. Determination of changes in vascularity after neoadjuvant chemotherapy using 3D power Doppler US with HDF can generate accurate predictions of the patient response, facilitating early decision-making. (paper)

  15. Effectiveness of evaluating tumor vascularization using 3D power Doppler ultrasound with high-definition flow technology in the prediction of the response to neoadjuvant chemotherapy for T2 breast cancer: a preliminary report

    Science.gov (United States)

    Shia, Wei-Chung; Chen, Dar-Ren; Huang, Yu-Len; Wu, Hwa-Koon; Kuo, Shou-Jen

    2015-10-01

    The aim of this study was to evaluate the effectiveness of advanced ultrasound (US) imaging of vascular flow and morphological features in the prediction of a pathologic complete response (pCR) and a partial response (PR) to neoadjuvant chemotherapy for T2 breast cancer. Twenty-nine consecutive patients with T2 breast cancer treated with six courses of anthracycline-based neoadjuvant chemotherapy were enrolled. Three-dimensional (3D) power Doppler US with high-definition flow (HDF) technology was used to investigate the blood flow in and morphological features of the tumors. Six vascularity quantization features, three morphological features, and two vascular direction features were selected and extracted from the US images. A support vector machine was used to evaluate the changes in vascularity after neoadjuvant chemotherapy, and pCR and PR were predicted on the basis of these changes. The most accurate prediction of pCR was achieved after the first chemotherapy cycle, with an accuracy of 93.1% and a specificity of 85.5%, while that of a PR was achieved after the second cycle, with an accuracy of 79.31% and a specificity of 72.22%. Vascularity data can be useful to predict the effects of neoadjuvant chemotherapy. Determination of changes in vascularity after neoadjuvant chemotherapy using 3D power Doppler US with HDF can generate accurate predictions of the patient response, facilitating early decision-making.

  16. 3D visualization reduces operating time when compared to high-definition 2D in laparoscopic liver resection: a case-matched study.

    Science.gov (United States)

    Velayutham, Vimalraj; Fuks, David; Nomi, Takeo; Kawaguchi, Yoshikuni; Gayet, Brice

    2016-01-01

    To evaluate the effect of three-dimensional (3D) visualization on operative performance during elective laparoscopic liver resection (LLR). Major limitations of conventional laparoscopy are lack of depth perception and tactile feedback. Introduction of robotic technology, which employs 3D imaging, has removed only one of these technical obstacles. Despite the significant advantages claimed, 3D systems have not been widely accepted. In this single institutional study, 20 patients undergoing LLR by high-definition 3D laparoscope between April 2014 and August 2014 were matched to a retrospective control group of patients who underwent LLR by two-dimensional (2D) laparoscope. The number of patients who underwent major liver resection was 5 (25%) in the 3D group and 10 (25%) in the 2D group. There was no significant difference in contralateral wedge resection or combined resections between the 3D and 2D groups. There was no difference in the proportion of patients undergoing previous abdominal surgery (70 vs. 77%, p = 0.523) or previous hepatectomy (20 vs. 27.5%, p = 0.75). The operative time was significantly shorter in the 3D group when compared to 2D (225 ± 109 vs. 284 ± 71 min, p = 0.03). There was no significant difference in blood loss in the 3D group when compared to 2D group (204 ± 226 in 3D vs. 252 ± 349 ml in 2D group, p = 0.291). The major complication rates were similar, 5% (1/20) and 7.5% (3/40), respectively, (p ≥ 0.99). 3D visualization may reduce the operating time compared to high-definition 2D. Further large studies, preferably prospective randomized control trials are required to confirm this.

  17. Defending definitions of life.

    Science.gov (United States)

    Mix, Lucas John

    2015-01-01

    Over the past 10 years, it has become unpopular to talk about definitions of life, under the assumption that attempts at a precise definition are counterproductive. Recent attempts have failed to meet strict philosophical criteria for definitions and have failed to reach consensus. I argue that provisional definitions are necessary for clear communications. Our current knowledge of biology justifies a number of universal claims about the category of life. Whether or not "life" represents a natural category, it maps to a number of important, observable processes. Given the importance of those processes and the extent of our knowledge, plural explicit definitions of life (and related categories) will be necessary for progress in astrobiology and origin-of-life studies as well as biology in general. I propose concrete categories related to, but not necessarily coextensive with, life for clear communication and hypothesis formation: Woese life, Darwin life, Haldane life.

  18. Reactor safety study. An assessment of accident risks in U.S. commercial nuclear power plants. Appendix I. Accident definition and use of event trees

    International Nuclear Information System (INIS)

    1975-10-01

    Information is presented concerning accident definition and use of event trees, event tree methodology, potential accidents covered by the reactor safety study, analysis of potential accidents involving the reactor core, and analysis of potential accidents not involving the core

  19. Enacting Disability: How Can Science and Technology Studies Inform Disability Studies?

    Science.gov (United States)

    Galis, Vasilis

    2011-01-01

    This paper aims to discuss how science and technology studies (STS) can inform disability studies and challenge dominant approaches, such as the medical and the social models, in the ordering and representation of disability. Disability studies and STS have followed somewhat parallel paths in the history of ideas. From a positivist approach to…

  20. Reliability of digital ulcer definitions as proposed by the UK Scleroderma Study Group: A challenge for clinical trial design.

    Science.gov (United States)

    Hughes, Michael; Tracey, Andrew; Bhushan, Monica; Chakravarty, Kuntal; Denton, Christopher P; Dubey, Shirish; Guiducci, Serena; Muir, Lindsay; Ong, Voon; Parker, Louise; Pauling, John D; Prabu, Athiveeraramapandian; Rogers, Christine; Roberts, Christopher; Herrick, Ariane L

    2018-06-01

    The reliability of clinician grading of systemic sclerosis-related digital ulcers has been reported to be poor to moderate at best, which has important implications for clinical trial design. The aim of this study was to examine the reliability of new proposed UK Scleroderma Study Group digital ulcer definitions among UK clinicians with an interest in systemic sclerosis. Raters graded (through a custom-built interface) 90 images (80 unique and 10 repeat) of a range of digital lesions collected from patients with systemic sclerosis. Lesions were graded on an ordinal scale of severity: 'no ulcer', 'healed ulcer' or 'digital ulcer'. A total of 23 clinicians - 18 rheumatologists, 3 dermatologists, 1 hand surgeon and 1 specialist rheumatology nurse - completed the study. A total of 2070 (1840 unique + 230 repeat) image gradings were obtained. For intra-rater reliability, across all images, the overall weighted kappa coefficient was high (0.71) and was moderate (0.55) when averaged across individual raters. Overall inter-rater reliability was poor (0.15). Although our proposed digital ulcer definitions had high intra-rater reliability, the overall inter-rater reliability was poor. Our study highlights the challenges of digital ulcer assessment by clinicians with an interest in systemic sclerosis and provides a number of useful insights for future clinical trial design. Further research is warranted to improve the reliability of digital ulcer definition/rating as an outcome measure in clinical trials, including examining the role for objective measurement techniques, and the development of digital ulcer patient-reported outcome measures.

  1. Past speculations of future health technologies: a description of technologies predicted in 15 forecasting studies published between 1986 and 2010.

    Science.gov (United States)

    Doos, Lucy; Packer, Claire; Ward, Derek; Simpson, Sue; Stevens, Andrew

    2017-07-31

    To describe and classify health technologies predicted in forecasting studies. A portrait describing health technologies predicted in 15 forecasting studies published between 1986 and 2010 that were identified in a previous systematic review. Health technologies are classified according to their type, purpose and clinical use; relating these to the original purpose and timing of the forecasting studies. All health-related technologies predicted in 15 forecasting studies identified in a previously published systematic review. Outcomes related to (1) each forecasting study including country, year, intention and forecasting methods used and (2) the predicted technologies including technology type, purpose, targeted clinical area and forecast timeframe. Of the 896 identified health-related technologies, 685 (76.5%) were health technologies with an explicit or implied health application and included in our study. Of these, 19.1% were diagnostic or imaging tests, 14.3% devices or biomaterials, 12.6% information technology systems, eHealth or mHealth and 12% drugs. The majority of the technologies were intended to treat or manage disease (38.1%) or diagnose or monitor disease (26.1%). The most frequent targeted clinical areas were infectious diseases followed by cancer, circulatory and nervous system disorders. The most frequent technology types were for: infectious diseases-prophylactic vaccines (45.8%), cancer-drugs (40%), circulatory disease-devices and biomaterials (26.3%), and diseases of the nervous system-equally devices and biomaterials (25%) and regenerative medicine (25%). The mean timeframe for forecasting was 11.6 years (range 0-33 years, median=10, SD=6.6). The forecasting timeframe significantly differed by technology type (p=0.002), the intent of the forecasting group (p<0.001) and the methods used (p<001). While description and classification of predicted health-related technologies is crucial in preparing healthcare systems for adopting new innovations

  2. Are physical activity studies in Hispanics meeting reporting guidelines for continuous monitoring technology? A systematic review.

    Science.gov (United States)

    Layne, Charles S; Parker, Nathan H; Soltero, Erica G; Rosales Chavez, José; O'Connor, Daniel P; Gallagher, Martina R; Lee, Rebecca E

    2015-09-18

    Continuous monitoring technologies such as accelerometers and pedometers are the gold standard for physical activity (PA) measurement. However, inconsistencies in use, analysis, and reporting limit the understanding of dose-response relationships involving PA and the ability to make comparisons across studies and population subgroups. These issues are particularly detrimental to the study of PA across different ethnicities with different PA habits. This systematic review examined the inclusion of published guidelines involving data collection, processing, and reporting among articles using accelerometers or pedometers in Hispanic or Latino populations. English (PubMed; EbscoHost) and Spanish (SCIELO; Biblioteca Virtual en Salud) articles published between 2000 and 2013 using accelerometers or pedometers to measure PA among Hispanics or Latinos were identified through systematic literature searches. Of the 253 abstracts which were initially reviewed, 57 met eligibility criteria (44 accelerometer, 13 pedometer). Articles were coded and reviewed to evaluate compliance with recommended guidelines (N = 20), and the percentage of accelerometer and pedometer articles following each guideline were computed and reported. On average, 57.1 % of accelerometer and 62.2 % of pedometer articles reported each recommended guideline for data collection. Device manufacturer and model were reported most frequently, and provision of instructions for device wear in Spanish was reported least frequently. On average, 29.6 % of accelerometer articles reported each guideline for data processing. Definitions of an acceptable day for inclusion in analyses were reported most frequently, and definitions of an acceptable hour for inclusion in analyses were reported least frequently. On average, 18.8 % of accelerometer and 85.7 % of pedometer articles included each guideline for data reporting. Accelerometer articles most frequently included average number of valid days and least frequently

  3. Current Highlights on ESA's Planetary Technology Reference Studies

    Science.gov (United States)

    Falkner, P.

    The concept of Technology Reference Studies has been introduced already at EGU05, where the Venus Entry Probe (VEP), the Jupiter Minisat Explorer (JME), the Deimos Sample Return (DSR) and the Interstellar Heliopause Probe (IHP) have been presented in detail. At the EGU06 the new studies in reaction to the Cosmic Vision exercise have been introduced. The formulation of themes and mapping into potential future missions has been taken as basis in the planning of additional new and adaptation of existing TRS's to cover areas, which have not yet been addressed by any TRS. These new ongoing studies are progressing well and current highlights will be presented in the paper in further detail as well as an overview on supporting technology studies and Concurrent Design Facility (CDF) sessions. The Jupiter System Explorer (JSE) study investigates mission concepts with up to two Magnetospheric Orbiters placed in a highly elliptical Jovian orbit and the possibility to deploy a Jovian Entry Probe. The mission profile is based on a solar powered concept launched on a Soyuz-Fregat launcher. Mission analysis and the application of a new Jovian radiation model are supporting the study activities. The Near-Earth Asteroid Sample Return (NEA-SR) concept explores the possibilities of sample return or in-situ mission profiles with visits to up to two NEA targets. Due to the assumed low cost cap a trade between a sample return and remote/in-situ exploration concept has a high attention in the study. The Cross Scale TRS (CS-TRS) is intended to simultaneously investigate magnetospheric and plasma processes in three spatial scales with a formation flight of up to 12 spacecraft, orbiting on deep elliptical orbits around Earth. One of the major challenges is the launch of that number of spacecraft on a single launcher and the collisionless deployment of the formation at the target orbit. The scope if the GeoSail TRS is to demonstrate deployment, attitude control and navigation concepts for a

  4. The interplay between standardization and technological change : a study on wireless technologies, technological trajectories, and essential patent claims

    NARCIS (Netherlands)

    Bekkers, R.N.A.; Martinelli, A.

    2010-01-01

    In many technology fields, standardization is the primary method of achieving alignment between actors. Especially if strong network effects and increasing returns are present, the market often ends up with a single standard that dominates the technical direction, activities and search heuristics,

  5. Constructivism as a Theoretical Foundation for the Use of Technology in Social Studies

    Science.gov (United States)

    Doolittle, Peter E.; Hicks, David

    2003-01-01

    The National Council for the Social Studies has explicitly advocated technology integration into the social studies classroom to transform the teaching and learning of key social studies content and skills. While the call for technology integration into the social studies classroom is clear, the application of technology within the realm of social…

  6. Nuclear microbeam study of advanced materials for fusion reactor technology

    International Nuclear Information System (INIS)

    Alves, L.C.; Alves, E.; Grime, G.W.; Silva, M.F. da; Soares, J.C.

    1999-01-01

    The Oxford scanning proton microprobe was used to study SiC fibres, SiC/SiC ceramic composites and Be pebbles, which are some of the most important materials for fusion technology. For the SiC materials, although the results reveal a high degree of homogeneity and purity in the composition of the fibres, some grains containing heavy metals were detected in the composites. Rutherford backscattering analysis further allowed establishing that at least some of these grains are not on the surface of the material but rather distributed throughout the bulk of the SiC composites. The two different types of Be pebbles analysed also showed very different levels of contaminants. The information obtained with the microbeam analysis is confronted with the one resulting from the broad beam PIXE and RBS analysis

  7. Study on Dynamic Alignment Technology of COIL Resonator

    International Nuclear Information System (INIS)

    Xiong, M D; Zou, X J; Guo, J H; Jia, S N; Zhang, Z B

    2006-01-01

    The performance of great power chemical oxygen-iodine laser (COIL) beam is decided mostly by resonator mirror maladjustment and environment vibration. To improve the performance of light beam, an auto-alignment device is used in COIL resonator, the device can keep COIL resonator collimating by adjusting the optical components of resonator. So the coupling model of COIL resonator is present. The multivariable self study fuzzy uncoupling arithmetic and six-dimensional micro drive technology are used to design a six-input-three-output uncoupling controller, resulting in the realization of the high precision dynamic alignment. The experiments indicate that the collimating range of this system is 8 mrad, precision is 5 urad and frequency response is 20Hz, which meet the demand of resonator alignment system

  8. Development and Validation of Information Technology Mentor Teacher Attitude Scale: A Pilot Study

    Science.gov (United States)

    Saltan, Fatih

    2015-01-01

    The aim of this study development and validation of a teacher attitude scale toward Information Technology Mentor Teachers (ITMT). ITMTs give technological support to other teachers for integration of technology in their lessons. In the literature, many instruments have been developed to measure teachers' attitudes towards the technological tools…

  9. Energy and cost savings results for advanced technology systems from the Cogeneration Technology Alternatives Study /CTAS/

    Science.gov (United States)

    Sagerman, G. D.; Barna, G. J.; Burns, R. K.

    1979-01-01

    The Cogeneration Technology Alternatives Study (CTAS), a program undertaken to identify the most attractive advanced energy conversion systems for industrial cogeneration applications in the 1985-2000 time period, is described, and preliminary results are presented. Two cogeneration options are included in the analysis: a topping application, in which fuel is input to the energy conversion system which generates electricity and waste heat from the conversion system is used to provide heat to the process, and a bottoming application, in which fuel is burned to provide high temperature process heat and waste heat from the process is used as thermal input to the energy conversion system which generates energy. Steam turbines, open and closed cycle gas turbines, combined cycles, diesel engines, Stirling engines, phosphoric acid and molten carbonate fuel cells and thermionics are examined. Expected plant level energy savings, annual energy cost savings, and other results of the economic analysis are given, and the sensitivity of these results to the assumptions concerning fuel prices, price of purchased electricity and the potential effects of regional energy use characteristics is discussed.

  10. People with dementia in nursing home research: a methodological review of the definition and identification of the study population.

    Science.gov (United States)

    Palm, Rebecca; Jünger, Saskia; Reuther, Sven; Schwab, Christian G G; Dichter, Martin N; Holle, Bernhard; Halek, Margareta

    2016-04-05

    There are various definitions and diagnostic criteria for dementia, leading to discrepancies in case ascertainment in both clinical practice and research. We reviewed the different definitions, approaches and measurements used to operationalize dementia in health care studies in German nursing homes with the aim of discussing the implications of different approaches. We conducted a systematic search of the MEDLINE and CINAHL databases to identify pre-2016 studies conducted in German nursing homes that focused on residents with dementia or cognitive impairment. In- or exclusion of studies were consented by all authors; data extraction was independently carried out by 2 authors (RP, SJ). The studies' sampling methods were compared with respect to their inclusion criteria, assessment tools and methods used to identify the study population. We summarized case ascertainment methods from 64 studies. Study participants were identified based on a diagnosis that was evaluated during the study, or a recorded medical dementia diagnosis, or a recorded medical diagnosis either with additional cognitive screenings or using screening tests exclusively. The descriptions of the diagnostics that were applied to assess a diagnosis of dementia were not fully transparent in most of the studies with respect to either a clear reference definition of dementia or applied diagnostic criteria. If reported, various neuropsychological tests were used, mostly without a clear rationale for their selection. Pragmatic considerations often determine the sampling strategy; they also may explain the variances we detected in the different studies. Variations in sampling methods impede the comparability of study results. There is a need to consent case ascertainment strategies in dementia studies in health service research in nursing homes. These strategies should consider resource constraints and ethical issues that are related to the vulnerable population of nursing home residents. Additionally

  11. Study to Determine Adequate Margins in Radiotherapy Planning for Esophageal Carcinoma by Detailing Patterns of Recurrence After Definitive Chemoradiotherapy

    International Nuclear Information System (INIS)

    Button, Michael R.; Morgan, Carys A.; Croydon, Elizabeth S.; Roberts, S. Ashley; Crosby, Thomas D.L.

    2009-01-01

    Purpose: To ascertain the adequacy of radiotherapy (RT) margins by studying the relapse patterns after definitive chemoradiotherapy for carcinoma of the esophagus. Methods and Materials: We performed a retrospective study assessing the first site of disease relapse after definitive chemoradiotherapy that included four 3-weekly cycles of cisplatin and continuous infusion 5-fluorouracil, with conformal RT (50 Gy in 25 fractions) concurrent with Cycles 3 and 4. The RT planning target volume was the endoscopic ultrasonography/computed tomography-defined gross tumor volume with 1.5-cm lateral and 3-cm superoinferior margins. Results: A total of 145 patients were included. Their average age was 65.4 years, 45% had adenocarcinoma, 61% had lower third esophageal tumors, and 75% had Stage III-IVA disease. After RT, of 142 patients, 85 (60%) had evidence of relapse at a median follow-up of 18 months. The relapse was local (within the RT field) in 55; distant (metastatic) in 13, and a combination of local and distant in 14. The local relapse rates were not influenced by tumor stage, lymph node status, or disease length. Three patients developed a relapse in regions adjacent to the RT fields; however, it is unlikely that larger field margins would have been clinically acceptable or effective in these cases. The median overall survival was 15 months. Conclusion: The gross tumor volume-planning target volume margins in this study appeared adequate. Future efforts to improve outcomes using definitive chemoradiotherapy should be directed toward reducing the high rates of in-field and distant relapses

  12. Ella-V and technology usage technology usage in an english language and literacy acquisition validation randomized controlled trial study

    OpenAIRE

    Roisin P. Corcoran; Steven M. Ross; Beverly J. Irby; Fuhui Tong; Rafael Lara-Alecio; Cindy Guerrero

    2014-01-01

    This paper describes the use of technology to provide virtual professional development (VPD) for teachers and to conduct classroom observations in a study of English Language Learner (ELL) instruction in grades K–3. The technology applications were part of a cluster randomized control trial (RCT) design for a federally funded longitudinal validation study of a particular program, English Language and Literacy Acquisition-Validation, ELLA- V, to determine its degree of impact on English oral l...

  13. A Case Study of the Application of SAMR and TPACK for Reflection on Technology Integration into Two Social Studies Classrooms

    Science.gov (United States)

    Hilton, Jason Theodore

    2016-01-01

    As emerging technology continues to enter the social studies classroom, teachers need to approach integration of such technology in a systematic manner to ensure that such technology enhances the learning of their students. Currently, scholars of technology integration advocate for the use of one of two different models, either SAMR or TPACK. This…

  14. Entrepreneurship Education: An Experimental Study with Information and Communication Technology

    Directory of Open Access Journals (Sweden)

    Yenchun Jim Wu

    2018-03-01

    Full Text Available Entrepreneurship has been regarded as a new science in the promotion of economic development, which has led to rapid development in entrepreneurship education. The growing number of students enrolled in entrepreneurship programs creates unprecedented challenges on educators. Although multiple teaching and learning activities are adopted in entrepreneurship education, these are mainly carried out using traditional classroom lectures, case studies and group discussions. Nowadays, information & communication technology (ICT is used to enhance the effectiveness of traditional teaching methods and competency training. PowToon is a web-based ICT tool that hat allows teachers and students to quickly and easily create animated presentations. Using quasi-experimental design and qualitative method, this study is to examine whether PowToon is an effective tool for business plan presentation. The study find that the animated presentations attracted more investment than the groups that did not prepare animated videos. It reflects that developed videos which helps entrepreneurial team to better deliver their business ideas to investors in a well-thought out way. In addition, the results of the study show that individuals who generate a business idea did not necessarily significantly influence their investment decisions. Our findings challenge the concept on self-biases evaluations of the economic potential of their own business ideas. Finally, the students were very willing to adopt new ways of delivering their business ideas.

  15. Remote monitoring technologies for the prevention of metabolic syndrome: the Diabetes and Technology for Increased Activity (DaTA) study.

    Science.gov (United States)

    Stuckey, Melanie; Fulkerson, Robyn; Read, Emily; Russell-Minda, Elizabeth; Munoz, Claudio; Kleinstiver, Peter; Petrella, Robert

    2011-07-01

    Remote monitoring technologies are ideally suited for rural communities with limited access to health care. In an 8-week pilot study, we examined the feasibility of implementing and conducting a technology-intensive intervention in an underserviced rural setting. Our goal was to test the utility of self-monitoring technologies, physical activity, and education as tools to manage health indicators for the development of the cardiovascular complications (CVCs) of type 2 diabetes. The Diabetes and Technology for Increased Activity study was an open single-center study conducted in a community-based research setting. All 24 participants were provided with a Blackberry™ Smartphone, blood pressure monitor, glucometer, and pedometer. Smartphones transmitted measurements and survey results to the database, interfaced participants with the clinical team, and allowed for self-monitoring. Outcomes were improved body composition, improved markers of CVC risk factors, increased daily exercise, and interest in or awareness of lifestyle changes that impact health outcomes. Participants had excellent compliance for measurements, as self-monitoring provided a sense of security that improved from week 4 to week 8. Our team gained substantial insight into the operational requirements of technology-facilitated health care, including redefined hours of service; data reporting, management, and access protocols; and the utility of real-time clinical measures by remote monitoring. We developed an understanding of knowledge translation strategies as well as successful motivational and educational tools. Importantly, remote monitoring technology was found to be feasible and accepted in a rural setting. © 2011 Diabetes Technology Society.

  16. Leak detection, monitoring, and mitigation technology trade study update

    International Nuclear Information System (INIS)

    HERTZEL, J.S.

    1998-01-01

    This document is a revision and update to the initial report that describes various leak detection, monitoring, and mitigation (LDMM) technologies that can be used to support the retrieval of waste from the single-shell tanks (SST) at the Hanford Site. This revision focuses on the improvements in the technical performance of previously identified and useful technologies, and it introduces new technologies that might prove to be useful

  17. Support of Study on Engineering Technology from Physics and Mathematics

    OpenAIRE

    Mynbaev, Djafar K.; Cabo, Candido; Kezerashvili, Roman Ya.; Liou-Mark, Janet

    2008-01-01

    An approach that provides students with an ability to transfer learning in physics and mathematics to the engineering-technology courses through e-teaching and e-learning process is proposed. E-modules of courses in mathematics, physics, computer systems technology, and electrical and telecommunications engineering technology have been developed. These modules being used in the Blackboard and Web-based communications systems create a virtual interdisciplinary learning community, which helps t...

  18. Leak detection, monitoring, and mitigation technology trade study update

    Energy Technology Data Exchange (ETDEWEB)

    HERTZEL, J.S.

    1998-11-10

    This document is a revision and update to the initial report that describes various leak detection, monitoring, and mitigation (LDMM) technologies that can be used to support the retrieval of waste from the single-shell tanks (SST) at the Hanford Site. This revision focuses on the improvements in the technical performance of previously identified and useful technologies, and it introduces new technologies that might prove to be useful.

  19. Health information management using optical storage technology: case studies.

    Science.gov (United States)

    Kohn, D

    1992-05-01

    All the health care facilities examined in the case studies addressed several important organizational issues before and during the installation of their systems. All the facilities examined employee commitment. The prudent managers considered how easily their employees adapt to changes in their jobs and work environment. They considered how enthusiastic cooperation can be fostered in the creation of a liberated and reengineered office. This was determined not only by each individual's reaction to change, but also by the health care facility's track record with other system installations. For example, document image, diagnostic image, and coded data processing systems allow the integration of divergent health care information systems within complex institutions. Unfortunately, many institutions are currently struggling with how to create an information management architecture that will integrate their mature systems, such as their patient care and financial systems. Information managers must realize that if optical storage technology-based systems are used in a strategic and planned fashion, these systems can act as focal points for systems integration, not as promises to further confuse the issue. Another issue that needed attention in all the examples was the work environment. The managers considered how the work environment was going to affect the ability to integrate optical image and data systems into the institution. For example, many of these medical centers have created alliances with clinics, HMOs, and large corporate users of medical services. This created a demand for all or part of the health information outside the confines of the original institution. Since the work environment is composed of a handful of factors such as merged medical services, as many work environment factors as possible were addressed before application of the optical storage technology solution in the institutions. And finally, the third critical issue was the organization of work

  20. Application study of nuclear technologies for dual use

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jae Gon; Chung, W. S.; Park, W. S.; Lee, K. W.; Cha, H. K.; Han, M. H.; Yoon, J. S.; Honh, D. H.; Park, J. Y.; Lee, C. H.; Yeo, J. W.; Jung, M.; Ra, G. H

    2000-02-01

    The projects for the joint development of technology common to the civilian and military sectors are being carried out at national level to maximize the utilization of limited resources. The technologies have been identified through a process which considered whether they are duplicates of the present military technology, whether they are necessary, and whether their realization is feasible. In addition, the problems surfaced during the identification process have been analyzed and suggestions to vitalize the military application of civilian nuclear technology are presented in the contexts of personal channel, institutional networking, R and D information exchange, and budgetary support. (author)

  1. The systematic risk study in technology companies at Brazil

    Directory of Open Access Journals (Sweden)

    Marcio Marcelo Belli

    2017-09-01

    Full Text Available This work tested if brasilian technology companies has a greater systematic risk than traditional companies in Brazil. For to achieve tje purpose, two companies samples , one of technology companies and the other of traditional companies, were composed. The tecnique employed was a multiple regression analysis considering a dichotomous variable wich represents the technological factor and another numerical variable wich represents the intangibility degree of  companies. As a dependent variable was considered the CAPM systematic risk. The results indicated that technology companies have a greater systematic risk than traditional companies regardless of the degree of intangibility.

  2. Global case studies of soft-sediment deformation structures (SSDS: Definitions, classifications, advances, origins, and problems

    Directory of Open Access Journals (Sweden)

    G. Shanmugam

    2017-10-01

    Problems that hinder our understanding of SSDS still remain. They are: (1 vague definitions of the phrase “soft-sediment deformation”; (2 complex factors that govern the origin of SSDS; (3 omission of vital empirical data in documenting vertical changes in facies using measured sedimentological logs; (4 difficulties in distinguishing depositional processes from tectonic events; (5 a model-driven interpretation of SSDS (i.e., earthquake being the singular cause; (6 routine application of the genetic term “seismites” to the “SSDS”, thus undermining the basic tenet of process sedimentology (i.e., separation of interpretation from observation; (7 the absence of objective criteria to differentiate 21 triggering mechanisms of liquefaction and related SSDS; (8 application of the process concept “high-density turbidity currents”, a process that has never been documented in modern oceans; (9 application of the process concept “sediment creep” with a velocity connotation that cannot be inferred from the ancient record; (10 classification of pockmarks, which are hollow spaces (i.e., without sediments as SSDS, with their problematic origins by fluid expulsion, sediment degassing, fish activity, etc.; (11 application of the Earth's climate-change model; and most importantly, (12 an arbitrary distinction between depositional process and sediment deformation. Despite a profusion of literature on SSDS, our understanding of their origin remains muddled. A solution to the chronic SSDS problem is to utilize the robust core dataset from scientific drilling at sea (DSDP/ODP/IODP with a constrained definition of SSDS.

  3. Field study of wastes from fluidized-bed combustion technologies

    International Nuclear Information System (INIS)

    Weinberg, A.; Holcombe, L.; Butler, R.

    1991-01-01

    The Department of Energy (DOE) has undertaken a research project to monitor advanced coal process wastes placed in natural geologic settings. The overall objective of the study is to gather field data on the engineering and environmental performance of disposed solid waste from various advanced coal processes. The coal ash from a fluidized-bed combustion unit is being studied as part of the DOE program. The unit is a 110-MW circulating fluidized bed (CFB) at Colorado Ute Electric Association's Nucla Steam Electric Station, which is being demonstrated with the support of the DOE Clean Coal Technology Program. The Electric Power Research Institute is cofunding the study. In June of 1989, a test cell approximately 100 feet square and 8 feet deep was constructed and filled with ash from the Colorado Ute CFB unit. The cell was instrumented with lysimeters and neutron probe access tubes to monitor water flow and leachate chemistry in the ash; groundwater wells and runoff collection devices were installed to determine the effects on groundwater and surface water quality, and a meteorological station was installed to determine the water balance. Additionally, tests are being performed to evaluate the chemical, physical, and mineralogical properties of the solid waste and geologic materials. Results from the first year of monitoring are presented

  4. Workflow patterns the definitive guide

    CERN Document Server

    Russell, Nick; ter Hofstede, Arthur H M

    2016-01-01

    The study of business processes has emerged as a highly effective approach to coordinating an organization's complex service- and knowledge-based activities. The growing field of business process management (BPM) focuses on methods and tools for designing, enacting, and analyzing business processes. This volume offers a definitive guide to the use of patterns, which synthesize the wide range of approaches to modeling business processes. It provides a unique and comprehensive introduction to the well-known workflow patterns collection -- recurrent, generic constructs describing common business process modeling and execution scenarios, presented in the form of problem-solution dialectics. The underlying principles of the patterns approach ensure that they are independent of any specific enabling technology, representational formalism, or modeling approach, and thus broadly applicable across the business process modeling and business process technology domains. The authors, drawing on extensive research done by...

  5. ITER definition phase

    International Nuclear Information System (INIS)

    1989-01-01

    The International Thermonuclear Experimental Reactor (ITER) is envisioned as a fusion device which would demonstrate the scientific and technological feasibility of fusion power. As a first step towards achieving this goal, the European Community, Japan, the Soviet Union, and the United States of America have entered into joint conceptual design activities under the auspices of the International Atomic Energy Agency. A brief summary of the Definition Phase of ITER activities is contained in this report. Included in this report are the background, objectives, organization, definition phase activities, and research and development plan of this endeavor in international scientific collaboration. A more extended technical summary is contained in the two-volume report, ''ITER Concept Definition,'' IAEA/ITER/DS/3. 2 figs, 2 tabs

  6. Toward a definition of intolerance of uncertainty: a review of factor analytical studies of the Intolerance of Uncertainty Scale.

    Science.gov (United States)

    Birrell, Jane; Meares, Kevin; Wilkinson, Andrew; Freeston, Mark

    2011-11-01

    Since its emergence in the early 1990s, a narrow but concentrated body of research has developed examining the role of intolerance of uncertainty (IU) in worry, and yet we still know little about its phenomenology. In an attempt to clarify our understanding of this construct, this paper traces the way in which our understanding and definition of IU have evolved throughout the literature. This paper also aims to further our understanding of IU by exploring the latent variables measures by the Intolerance of Uncertainty Scale (IUS; Freeston, Rheaume, Letarte, Dugas & Ladouceur, 1994). A review of the literature surrounding IU confirmed that the current definitions are categorical and lack specificity. A critical review of existing factor analytic studies was carried out in order to determine the underlying factors measured by the IUS. Systematic searches yielded 9 papers for review. Two factors with 12 consistent items emerged throughout the exploratory studies, and the stability of models containing these two factors was demonstrated in subsequent confirmatory studies. It is proposed that these factors represent (i) desire for predictability and an active engagement in seeking certainty, and (ii) paralysis of cognition and action in the face of uncertainty. It is suggested that these factors may represent approach and avoidance responses to uncertainty. Further research is required to confirm the construct validity of these factors and to determine the stability of this structure within clinical samples. Copyright © 2011 Elsevier Ltd. All rights reserved.

  7. Media business transformation based on information technology : A pilot study of three Swedish newspapers

    OpenAIRE

    Sadat Alavioon, Samin

    2017-01-01

    The newspaper industry has been transformed after the emergence of information technology. According to the transformation of media businesses by technology advancement this study realizes the importance of opportunities and threats brought by new information technology in the newspaper industry. Therefore, to develop an understanding of how the newspaper industry can transform due to technology advancement three research questions were answered; RQ 1. How can information technologies transfo...

  8. The Modified Technology Acceptance Model for Private Clinical Physicians: A Case Study in Malaysia, Penang

    OpenAIRE

    Annie Ng Cheng San; Choy Johnn Yee

    2013-01-01

    Malaysia’s private clinic is wealth creator. To enhance its sustainable future, healthcare Information Technology (IT) change is inevitable. However, its’ IT acceptance is limited. The past literatures showed physicians have different technology acceptance decision as compare to common users. Hence, understanding the physicians’ technology acceptance is critical for technology management success. This study aims to gauge the factors influence technology acceptance decision among the physician...

  9. Scope Definition

    DEFF Research Database (Denmark)

    Bjørn, Anders; Owsianiak, Mikołaj; Laurent, Alexis

    2018-01-01

    The scope definition is the second phase of an LCA. It determines what product systems are to be assessed and how this assessment should take place. This chapter teaches how to perform a scope definition. First, important terminology and key concepts of LCA are introduced. Then, the nine items...... making up a scope definition are elaborately explained: (1) Deliverables. (2) Object of assessment, (3) LCI modelling framework and handling of multifunctional processes, (4) System boundaries and completeness requirements, (5) Representativeness of LCI data, (6) Preparing the basis for the impact...... assessment, (7) Special requirements for system comparisons, (8) Critical review needs and (9) Planning reporting of results. The instructions relate both to the performance and reporting of a scope definition and are largely based on ILCD....

  10. Focus on Games & Simulations: Trends+Technologies+Case Studies

    Science.gov (United States)

    Weinstein, Margery

    2011-01-01

    A changing mindset combined with changing technology is driving the use of games and simulations. People are becoming more open to using games and simulations for learning, and, at the same time, the technologies are making the development of games and simulations easier and faster than a mere five years ago. Together, the changing mindset and the…

  11. Navigation studies based on the ubiquitous positioning technologies

    Science.gov (United States)

    Ye, Lei; Mi, Weijie; Wang, Defeng

    2007-11-01

    This paper summarized the nowadays positioning technologies, such as absolute positioning methods and relative positioning methods, indoor positioning and outdoor positioning, active positioning and passive positioning. Global Navigation Satellite System (GNSS) technologies were introduced as the omnipresent out-door positioning technologies, including GPS, GLONASS, Galileo and BD-1/2. After analysis of the shortcomings of GNSS, indoor positioning technologies were discussed and compared, including A-GPS, Cellular network, Infrared, Electromagnetism, Computer Vision Cognition, Embedded Pressure Sensor, Ultrasonic, RFID (Radio Frequency IDentification), Bluetooth, WLAN etc.. Then the concept and characteristics of Ubiquitous Positioning was proposed. After the ubiquitous positioning technologies contrast and selection followed by system engineering methodology, a navigation system model based on Incorporate Indoor-Outdoor Positioning Solution was proposed. And this model was simulated in the Galileo Demonstration for World Expo Shanghai project. In the conclusion, the prospects of ubiquitous positioning based navigation were shown, especially to satisfy the public location information acquiring requirement.

  12. Target volume definition for external beam partial breast radiotherapy: Clinical, pathological and technical studies informing current approaches

    International Nuclear Information System (INIS)

    Kirby, Anna M.; Coles, Charlotte E.; Yarnold, John R.

    2010-01-01

    Partial breast irradiation (PBI) is currently under investigation in several phase III trials and, following a recent consensus statement, its use off-study may increase despite ongoing uncertainty regarding optimal target volume definition. We review the clinical, pathological and technical evidence for target volume definition in external beam partial breast irradiation (EB-PBI). The optimal method of tumour bed (TB) delineation requires X-ray CT imaging of implanted excision cavity wall markers. The definition of clinical target volume (CTV) as TB plus concentric 15 mm margins is based on the anatomical distribution of multifocal and multicentric disease around the primary tumour in mastectomy specimens, and the clinical locations of local tumour relapse (LR) after breast conservation surgery. If the majority of LR originate from foci of residual invasive and/or intraduct disease in the vicinity of the TB after complete microscopic resection, CTV margin logically takes account of the position of primary tumour within the surgical resection specimen. The uncertain significance of independent primary tumours as sources of preventable LR, and of wound healing responses in stimulating LR, increases the difficulties in defining optimal CTV. These uncertainties may resolve after long-term follow-up of current PBI trials. By contrast, a commonly used 10 mm clinical to planning target volume (PTV) margin has a stronger evidence base, although departmental set-up errors need to be confirmed locally. A CTV-PTV margin >10 mm may be required in women with larger breasts and/or large seromas, whilst the role of image-guided radiotherapy with or without TB markers in reducing CTV-PTV margins needs to be explored.

  13. Studies on fundamental technologies for producing tokamak-plasma

    International Nuclear Information System (INIS)

    Matsuzaki, Yoshimi

    1987-10-01

    The report describes studies on fundamental technologies to produce tokamak-plasma of the JFT-2 and JFT-2M tokamaks. (1) In order to measure the particle number of residual gases, calibration methods of vacuum gauges have been developed. (2) Devices for a Taylor-type discharge cleaning (TDC), a glow discharge cleaning (GDC) and ECR discharge cleaning (ECR-DC) have been made and the cleaning effects have been investigated. In TDC the most effective plasma for cleaning is obtained in the plasma with 5 eV of electron temperature. GDC is effective in removing carbon impurities, but is less effective for removing oxygen impurities. ECR-DC has nearly the similar effect as TDC. The cleaning effect of these three types were studied by comparing the properties of resulting tokamak plasmas in the JFT-2M tokamak. (3) Experimental studies of pre-ionization showed as following results; A simple pre-ionization equipment as a hot-electron-gun and a J x B gun was effective in reducing breakdown voltage. An ordinary mode wave of the electron cyclotron frequency was very effective for pre-ionization. The RF power whose density is 3.6 x 10 -2 W/cm 3 produced plasma of an electron density of 5 x 10 11 cm -3 . In this case, it is possible to start up with negligible consumption of the magnetic flux caused by the plasma resistance. (4) Concerning to studies on plasma control, the following results were obtained; In order to obtain constant plasma current, a pulse forming network was constructed and sufficient constant plasma current was achieved. In applying an iso-flux method for measuring the plasma position, it is no problem practically to use only one loop-coil and one magnetic probe. (author)

  14. Implementation of renewable technologies - Opportunities and barriers. Zimbabwe country study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    Renewable Energy Technologies (RETS) have over the years become an integral part of the energy supply chain in most developed countries. Recent projections show that 13.5% of the world's primary energy supply comes from renewable and this figure has an aggregated annual growth rate of 16%. Wind has the highest annual growth rate of 22% while the least annual growth rate of 2% is for hydropower. The main push for renewable like wind in the OECD countries are environmental concerns and the business aspect in power generation. The situation is however completely different in Africa, where the thrust for RETs is developmental based. Although the continent has abundant renewable energy resources like solar, biomass, wind and hydro potential, they have remained largely unexploited. Several efforts have been made to help African countries like Zimbabwe to exploit such resources. The main objectives of this country study included review of Zimbabwe's development of past RETs, establish barriers related lessons learnt from such projects and currently running RETs projects, identify barriers experienced by other projects and then select a few barrier removal projects and then develop them with the help of all stake holders in the country. The methodology of this study involved a review of past RETs projects to establish barriers faced and barriers related lessons learnt. An examination of the policy instruments related to RETs was done to establish how they promote the dissemination of the technologies as well as their adequacy. A survey of all possible RETs projects in the country was carried out and in this survey the end-users were visited and interviewed by the research team. An initial workshop, which was attended by all stake holders, was held in November 1999. An Advisory committee on RETs in Zimbabwe was then set up comprising of various stake holders from government, the private sector, research institutions, interviewed end-users and the NGO community

  15. Technology management: case study of an integrated health system.

    Science.gov (United States)

    Dahl, D H; McFarlan, T K

    1994-12-01

    Technology management has assumed a role of vital importance in today's health care environment. Capital reserves and operating income have been stretched by pervasive and expensive technologies, while overall reimbursement has been reduced. It is imperative for hospitals to develop and consistently use technology management processes that begin prior to a technology's introduction in the hospital and continue throughout its life cycle. At Samaritan Health System (SHS), an integrated health care delivery system based in Phoenix, technology management provides tools to improve decision making and assist in the system's integration strategy as well as control expenses. SHS uses a systemwide technology-specific plan to guide acquisition and/or funding decisions. This plan describes how particular technologies can help achieve SHS' organizational goals such as promoting system integration and/or improving patient outcomes while providing good economic value. After technologies are targeted in this systemwide plan they are prioritized using a two-stage capital prioritization process. The first stage of the capital prioritization process considers the quantitative and qualitative factors critical for equitable capital distribution across the system. The second stage develops a sense of ownership among the parties that affect and are affected by the allocation at a facility level. This process promotes an efficient, effective, equitable, and defensible approach to resource allocation and technology decision making. Minimizing equipment maintenance expenditures is also an integral part of technology management at SHS. The keys to reducing maintenance expenditures are having a process in place that supports a routine fiscal evaluation of maintenance coverage options and ensuring that manufacturers are obligated to provide critical maintenance resources at the time of equipment purchase. Maintenance service options under consideration in this report include full

  16. Strategies for Integrating Emerging Technologies: Case Study of an Online Educational Technology Master's Program

    Science.gov (United States)

    Czerkawski, Betul C.

    2013-01-01

    Emerging technologies do not necessarily facilitate or advance learning processes; teaching strategies that are used in the learning process, integration and incorporation methods do. In online instruction, research shows that "effective distance education depends on the provision of pedagogical excellence" (Bernard et al., 2004, p.413).…

  17. Learning to make technology work - a study of learning in technology demonstration projects

    DEFF Research Database (Denmark)

    Sutherland Olsen, Dorothy; Andersen, Per Dannemand

    2014-01-01

    Building working demonstrations of new technologies within sustainable energy and transport has become an important activity in the move towards a more energy efficient society. The work involved in building these demonstrations is usually organised in a project with a variety of different partic...

  18. Definition of curriculum and approach: study of a training course for teachers of non-formal education in NGOs

    Directory of Open Access Journals (Sweden)

    Deivis Perez

    2014-06-01

    Full Text Available This article presents a research aimed to analyze the approach and the definition of guiding curriculum of teacher training for work in the non-formal education in non-governmental organizations(NGOs. We opted for a qualitative approach and case study of Teacher Training Course for NGOs, developed by Ong São Paulo-SP. The research instruments were: analysis of documents of the course, interviews with trainers and coordinator and literature review. In this course, curriculum is defined as a path to be followed by students and instructors and the coordinator of the subjects studied. We adopted the so-called Integrated Curriculum, in which teaching occurs by the study of problem situations and integrators of learning projects. At the end, we suggest improving the course and following that information, it is hoped, one will support the production of further comparative research.

  19. KASPTM genotyping technology and its use in gene­tic-breeding programs (a study of maize

    Directory of Open Access Journals (Sweden)

    Н. Е. Волкова

    2017-06-01

    Full Text Available Purpose. To review publications relating to the key point of the genotyping technology that is competitive allele-specific polymerase chain reaction (which is called now Kompetitive Allele Specific PCR, KASPTM and its use in various genetic-breeding researching (a study of maize. Results. The essence of KASP-genotyping, its advantages are highlighted. The requirements for matrix DNA are presented, since the success of the KASP-analysis depends on its qua­lity and quantity. Examples of global projects of plant breeding for increasing crop yields using the KASP genoty­ping technology are given. The results of KASP genotyping and their introduction into breeding and seed production, in particular, for determining genetic identity, genetic purity, origin check, marker-assisted selection, etc. are presented using maize as an example. It is demonstrated how geno­mic selection according to KASP genotyping technology can lead to rapid genetic enhancement of drought resistance in maize. Comparison of the effectiveness of creating lines with certain traits (for example, combination of high grain yield and drought resistance using traditional breeding approaches (phenotype selection and molecular genetic methods (selection by markers was proved that it takes four seasons (two years in case of greenhouses in order to unlock the potential of the plant genotype using traditional self-pollination, test-crossing and definitions, while using markers, the population was enriched with target alleles during one season. At the same time, there was no need for a stress factor. Conclusions. KASP genotyping technology is a high-precision and effective tool for modern genetics and breeding, which is successfully used to study genetic diversity, genetic relationship, population structure, gene­tic identity, genetic purity, origin check, quantitative locus mapping, allele mapping, marker-assisted selection, marker-assisted breeding. It is expedient and timely to

  20. Summer Students in Virtual Reality: A Pilot Study on Educational Applications of Virtual Reality Technology.

    Science.gov (United States)

    Bricken, Meredith; Byrne, Chris M.

    The goal of this study was to take a first step in evaluating the potential of virtual reality (VR) as a learning environment. The context of the study was The Technology Academy, a technology-oriented summer day camp for students ages 5-18, where student activities center around hands-on exploration of new technology (e.g., robotics, MIDI digital…

  1. A Study on the Role of Web Technology in Enhancing Research Pursuance among University Academia

    Science.gov (United States)

    Hussain, Irshad; Durrani, Muhammad Ismail

    2012-01-01

    The purpose of this study was to evaluate the role of web technologies in promoting research pursuance among university teachers, examine the use of web technologies by university teachers in conducting research and identify the problems of university academia in using web technologies for research. The study was delimited to academia of social…

  2. Health Information Technology Usability Evaluation Scale (Health-ITUES) for Usability Assessment of Mobile Health Technology: Validation Study.

    Science.gov (United States)

    Schnall, Rebecca; Cho, Hwayoung; Liu, Jianfang

    2018-01-05

    Mobile technology has become a ubiquitous technology and can be particularly useful in the delivery of health interventions. This technology can allow us to deliver interventions to scale, cover broad geographic areas, and deliver technologies in highly tailored ways based on the preferences or characteristics of users. The broad use of mobile technologies supports the need for usability assessments of these tools. Although there have been a number of usability assessment instruments developed, none have been validated for use with mobile technologies. The goal of this work was to validate the Health Information Technology Usability Evaluation Scale (Health-ITUES), a customizable usability assessment instrument in a sample of community-dwelling adults who were testing the use of a new mobile health (mHealth) technology. A sample of 92 community-dwelling adults living with HIV used a new mobile app for symptom self-management and completed the Health-ITUES to assess the usability of the app. They also completed the Post-Study System Usability Questionnaire (PSSUQ), a widely used and well-validated usability assessment tool. Correlations between these scales and each of the subscales were assessed. The subscales of the Health-ITUES showed high internal consistency reliability (Cronbach alpha=.85-.92). Each of the Health-ITUES subscales and the overall scale was moderately to strongly correlated with the PSSUQ scales (r=.46-.70), demonstrating the criterion validity of the Health-ITUES. The Health-ITUES has demonstrated reliability and validity for use in assessing the usability of mHealth technologies in community-dwelling adults living with a chronic illness. ©Rebecca Schnall, Hwayoung Cho, Jianfang Liu. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 05.01.2018.

  3. Risk Management in Information Technology Project: An Empirical Study

    Directory of Open Access Journals (Sweden)

    Kornelius Irfandhi

    2016-09-01

    Full Text Available The companies are facing some risks due to changes in a dynamic environment. If risks are not managed properly, it will have some negative impacts on the companies at the present and the future. One important function of the Information Technology (IT governance is risk management. Risk management in IT project aims to provide a safe environment for IT projects undertaken. Risk management becomes an important process for the success of IT projects. This article discussed the risk of IT project and whether there was a relationship between risk management and the success of the project. The method used was performing a literature review of several scientific articles which published between 2010 and 2014. The results of this study are the presence of risk management and risk manager influence the success of the project. Risk analysis and risk monitoring and control also have a relationship with the subjective performance of IT projects. If risk management is applied properly, the chance of the success of the projects undertaken can be increased. 

  4. Strategic Management in Business Information Technology: A Case Study

    Directory of Open Access Journals (Sweden)

    Marcos Weber

    2013-09-01

    Full Text Available The Information Technology (IT sector is regarded as strategic for national economy. In Brazil, this sector is formed mostly of micro and small businesses. This article aims at understanding how does the strategic management process occurs in a small IT company, according to the schools of strategy and the strategy-as-practice approach. The method applied was a single case study of a small IT company, located in Rio Grande do Sul. The analyzed data revealed that the company adopts an informal strategic management centered on its directors, which may be related to the entrepreneurial school of strategy. However, data also indicate the presence of features of other schools of strategy along the company trajectory. We analyzed the strategy as social practice at the strategic level and also at the tactical level of the organization, through the guidance of managers, their interactions with customers and suppliers, their decision-making processes, among other practices related to everyday life. The results of the article shed light on the process of strategic management in micro and small IT companies, generating insights that can be useful for managers of similar companies.

  5. High-Definition Television: Applications for This New Technology. Fact Sheet for the Chairman, Subcommittee on Telecommunications and Finance, Committee on Energy and Commerce, House of Representatives.

    Science.gov (United States)

    General Accounting Office, Washington, DC. Information Management and Technology Div.

    Prepared in response to a request for information from the chairman of the House of Representatives Subcommittee on Telecommunications and Finance, Committee on Energy and Commerce, this report provides information on 14 high-definition television (HDTV) applications spanning national defense, medical research, space exploration, and electronic…

  6. Technology and the Social Studies--Where We Were; Where We Are, Where We Are Going...

    Science.gov (United States)

    Mead-Mezzetta, Shirley

    1986-01-01

    Reviews the goals of the California State Department of Education's Technology in Curriculum (TIC) projects. Provides several examples of technology use and identifies several pieces of software which are being successfully used in high school social studies classes. (JDH)

  7. An Ontology to Improve Transparency in Case Definition and Increase Case Finding of Infectious Intestinal Disease: Database Study in English General Practice.

    Science.gov (United States)

    de Lusignan, Simon; Shinneman, Stacy; Yonova, Ivelina; van Vlymen, Jeremy; Elliot, Alex J; Bolton, Frederick; Smith, Gillian E; O'Brien, Sarah

    2017-09-28

    Infectious intestinal disease (IID) has considerable health impact; there are 2 billion cases worldwide resulting in 1 million deaths and 78.7 million disability-adjusted life years lost. Reported IID incidence rates vary and this is partly because terms such as "diarrheal disease" and "acute infectious gastroenteritis" are used interchangeably. Ontologies provide a method of transparently comparing case definitions and disease incidence rates. This study sought to show how differences in case definition in part account for variation in incidence estimates for IID and how an ontological approach provides greater transparency to IID case finding. We compared three IID case definitions: (1) Royal College of General Practitioners Research and Surveillance Centre (RCGP RSC) definition based on mapping to the Ninth International Classification of Disease (ICD-9), (2) newer ICD-10 definition, and (3) ontological case definition. We calculated incidence rates and examined the contribution of four supporting concepts related to IID: symptoms, investigations, process of care (eg, notification to public health authorities), and therapies. We created a formal ontology using ontology Web language. The ontological approach identified 5712 more cases of IID than the ICD-10 definition and 4482 more than the RCGP RSC definition from an initial cohort of 1,120,490. Weekly incidence using the ontological definition was 17.93/100,000 (95% CI 15.63-20.41), whereas for the ICD-10 definition the rate was 8.13/100,000 (95% CI 6.70-9.87), and for the RSC definition the rate was 10.24/100,000 (95% CI 8.55-12.12). Codes from the four supporting concepts were generally consistent across our three IID case definitions: 37.38% (3905/10,448) (95% CI 36.16-38.5) for the ontological definition, 38.33% (2287/5966) (95% CI 36.79-39.93) for the RSC definition, and 40.82% (1933/4736) (95% CI 39.03-42.66) for the ICD-10 definition. The proportion of laboratory results associated with a positive test

  8. Assessing technology transfer in the Clean Development Mechanism

    OpenAIRE

    Cools, Sara Lena Yri

    2007-01-01

    This paper presents an operational definition of technology transfer, to be applied in studies of technology transfer in projects under the Kyoto Protocol’s Clean Development Mechanism (CDM). Although the CDM has never been given an explicit mandate for transferring technologies, its contribution in this respect has both been hoped for and exacted. The discussions of technology transfer in CDM projects are however blurred by widely varying conceptions of what technology transfer is. Qu...

  9. Study of LANs access technologies in wind power system

    DEFF Research Database (Denmark)

    Wei, Mu; Chen, Zhe

    2010-01-01

    Due to the energy challenges in the world, new types of generation technologies, such as renewable energy based generators, attract great attention and are being quickly developed, which results in the dramatic developments and changes in modern power systems, the communication technologies play...... a increasingly important role in guaranteeing the power system’s stability, reliability, and security. In this paper the necessity of communication technologies employed in wind power system are introduced. According the International Standards Organization (ISO) reference 7-layered model, the communication...... power environment are explained and discussed. Furthermore the simulation of application of Ethernet in an offshore wind farm communication network by a software, OPNET, is elaborated. With the investigation of the communication technologies in this paper, the offshore wind farm SCADA system can...

  10. Technological capabilities, institutions and firm productivity: a multilevel study

    Czech Academy of Sciences Publication Activity Database

    Goedhuys, M.; Srholec, Martin

    2015-01-01

    Roč. 27, č. 1 (2015), s. 122-139 ISSN 0957-8811 Institutional support: PRVOUK-P23 Keywords : productivity * innovation * technological capability Subject RIV: AH - Economics Impact factor: 0.720, year: 2015

  11. [Congenital adrenal hyperplasia: a qualitative study on sex definition and redesignation dilation surgery and psychological support (part II)].

    Science.gov (United States)

    Telles-Silveira, Mariana; Tonetto-Fernandes, Vânia F; Schiller, Paulo; Kater, Claudio E

    2009-12-01

    To identify relevant questions related to sex definition and re-designation and reconstructive surgery in patients with congenital adrenal hyperplasia (CAH), and to understand the role of the psychologist in providing care for these patients. We selected 21 subjects: 7 pediatric endocrinologists from 5 Brazilian Public Health System institutions, 9 parents and 6 patients with CAH, according to a qualitative research model. In this paper, 3 of the studied categories are analyzed: 'sex definition and re-designation', 'reconstructive surgery/vaginal dilation', and 'psychology'. Parents' main anguish relates to the situation of an unnamed sex at birth, whereas sex re-designation was distressful to physicians. A sense of loneliness when dealing with the disease and treatment was a common anguish among patients; dilation procedures were the major complaint. In general, physicians recommend that genital reconstructive surgery be performed early on to avoid future trauma. In such a complex scenario, it is remarkable that not all the reference service staff have a psychologist on duty. Difficulties to deal with questions involving sexuality were evident and dilation procedures are an additional source of trauma for these patients.

  12. Management of SPN in France. Pathways for definitive diagnosis of solitary pulmonary nodule: a multicentre study in 18 French districts

    International Nuclear Information System (INIS)

    Alzahouri, Kazem; Velten, Michel; Arveux, Patrick; Woronoff-Lemsi, Marie-Christine; Jolly, Damien; Guillemin, Francis

    2008-01-01

    The process of diagnosis and management of solitary pulmonary nodules (SPNs) between 1 and 3 cm is not standardized. This multicentre study investigated how diagnosis of newly discovered SPNs is managed in routine practice. We examined 11,515 radiology reports of patients undergoing chest computed tomography (CT) at all 76 radiology centres in 18 French administrative districts covering 8,220,000 people. Information on diagnostic procedures and treatment administered from discovery to definitive diagnosis of SPN was collected prospectively. We identified 152 cases of newly diagnosed SPNs. Follow-up was complete for 112 patients. The median number of diagnostic tests was 4 and the mean time to diagnosis was 41.4 days. Marked variability was observed in the sequence of diagnostic tests, and 8 diagnostic pathways were identified. Patients' characteristics and radiological features of SPNs influenced the number of tests performed. Referral by specialist, history of smoking and spiculated SPN predicted the performance of at least one invasive procedure (P < 0.01). Definitive diagnosis was a malignant disease in 30 patients (26%). The diagnosis of SPN is a complex process that physicians approach in markedly different ways. Implementing practice guidelines for managing the diagnosis of SPN requires clarification

  13. XMPP The Definitive Guide

    CERN Document Server

    Saint-Andre, Peter; Smith, Kevin

    2009-01-01

    This practical book provides everything you need to know about the Extensible Messaging and Presence Protocol (XMPP) -- the open technology for real-time communication used in instant messaging, Voice over IP, real-time collaboration, social networking, microblogging, lightweight middleware, cloud computing, and more. XMPP: The Definitive Guide walks you through the thought processes and design decisions involved in building a complete XMPP-enabled application, and adding real-time interfaces to existing applications.

  14. Innovation in concentrating solar power technologies: A study drawing on patent data

    OpenAIRE

    Braun, Frauke G.; Hooper, Elizabeth; Wand, Robert; Zloczysti, Petra

    2010-01-01

    Better understanding the innovative process of renewable energy technologies is important for tackling climate change. Though concentrating solar power is receiving growing interest, innovation studies so far have explored innovative activity in solar technologies in general, ignoring the major differences between solar photovoltaic and solar thermal technologies. This study relies on patent data to examine international innovative activity in concentrating solar power technologies. Our uniqu...

  15. Benchmark Problems of the Geothermal Technologies Office Code Comparison Study

    Energy Technology Data Exchange (ETDEWEB)

    White, Mark D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Podgorney, Robert [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kelkar, Sharad M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McClure, Mark W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Danko, George [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ghassemi, Ahmad [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fu, Pengcheng [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bahrami, Davood [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Barbier, Charlotte [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cheng, Qinglu [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chiu, Kit-Kwan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Detournay, Christine [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Elsworth, Derek [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fang, Yi [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Furtney, Jason K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gan, Quan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gao, Qian [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Guo, Bin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hao, Yue [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Horne, Roland N. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Huang, Kai [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Im, Kyungjae [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Norbeck, Jack [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rutqvist, Jonny [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Safari, M. R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sesetty, Varahanaresh [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sonnenthal, Eric [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tao, Qingfeng [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); White, Signe K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wong, Yang [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Xia, Yidong [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-12-02

    A diverse suite of numerical simulators is currently being applied to predict or understand the performance of enhanced geothermal systems (EGS). To build confidence and identify critical development needs for these analytical tools, the United States Department of Energy, Geothermal Technologies Office has sponsored a Code Comparison Study (GTO-CCS), with participants from universities, industry, and national laboratories. A principal objective for the study was to create a community forum for improvement and verification of numerical simulators for EGS modeling. Teams participating in the study were those representing U.S. national laboratories, universities, and industries, and each team brought unique numerical simulation capabilities to bear on the problems. Two classes of problems were developed during the study, benchmark problems and challenge problems. The benchmark problems were structured to test the ability of the collection of numerical simulators to solve various combinations of coupled thermal, hydrologic, geomechanical, and geochemical processes. This class of problems was strictly defined in terms of properties, driving forces, initial conditions, and boundary conditions. Study participants submitted solutions to problems for which their simulation tools were deemed capable or nearly capable. Some participating codes were originally developed for EGS applications whereas some others were designed for different applications but can simulate processes similar to those in EGS. Solution submissions from both were encouraged. In some cases, participants made small incremental changes to their numerical simulation codes to address specific elements of the problem, and in other cases participants submitted solutions with existing simulation tools, acknowledging the limitations of the code. The challenge problems were based on the enhanced geothermal systems research conducted at Fenton Hill, near Los Alamos, New Mexico, between 1974 and 1995. The problems

  16. US country studies program: Support for climate change studies, national plans, and technology assessments

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    This paper describes the objectives of the next phase of the U.S. Country Studies Program which was launched in support of the Framework Convention on Climate Change (FCCC). The next phases of this program aim to: assist countries in preparing Climate Change Action plans; support technology assessments and development of technology initiatives; enhance exchange of information and expertise in support of FCCC. The program offers support for these processes in the form of handbooks which have been published to aid in preparing action plans, and to provide information on methane, forestry, and energy technologies. In addition an array of training workshops have been and are scheduled to offer hands on instruction to participants, expert advice is available from trained personnel, and modeling tools are available to aid in development of action plans.

  17. Indeterminacy of definitions and criteria in mental health: case study of emotional disorders.

    Science.gov (United States)

    Nikolaidis, George

    2013-06-01

    such as the ones of theorists like Solomon, Nash, Rey, Pugmire and Lyons) as well as in comprehensive theoretical schemes combining experimental data (such as the ones provided by the works of Schachter and Singer, Ekman and Friesen, Panksepp, Damasio and Griffiths), there seems to be a radical indeterminacy of conceptual content and fundamental features of emotions in general, as well as of particular emotional states. Furthermore, there is an apparent conceptual incapability to include each and every feature of emotional states within a single comprehensive definition without making reference to contingent particularities of their biological instantiation. At least in the crucial concept of emotional states, when examined carefully, it seems that (1) there are substantial barriers to the ambitious quest for a scientific grounding of taxonomies and definitions of phenomena like emotions, due to the inability to provide an independent verification of scientific propositions; (2) all major approaches in Psychology and Psychiatry seem to have serious shortcomings in defining emotions; (3) such shortcomings have to do with fundamental issues such as the nature of mental states; (4) most ordinary concepts of emotions utilized by clinicians and researchers tend to be circular and question begging when scrutinized theoretically; and (5) historically dominant beliefs, values and cultural systems tend to influence heavily both the acceptability of such representations of emotions as well as their very nature. © 2013 John Wiley & Sons Ltd.

  18. Definition of internal target volume and domestric study for hepatocellular carcinoma using four-dimensional CT

    International Nuclear Information System (INIS)

    Xi Mian; Liu Mengzhong; Deng Xiaowu; Zhang Li; Huang Xiaoyan; Cai Ling

    2009-01-01

    Objective: To define individualized internal target volume (ITV) for hepatocellular carcinoma using four-dimensional (4D) CT, and to compare the differences in target volume definition and dose distribution among 3D, 4D and respiratory-gated plans. Methods: 4DCT scanning was obtained for 12 patients with hepatocellular. Gross tumor volume (GTV), clinical target volume (CTV) and normal tissues were contoured on all 10 respiratory phases of 4DCT images. The 3D, 4D and gated treatment plans were prepared for each patient using three different planning target volumes (PTVs): 1) PTV 3D was derived from a single CTV plus conventional margins; 2) PTV 4D was derived from ITV 4D , which encompassed all 10 CTVs plus setup margins (SMs); 3) PT Gating was derived from ITV Gating , which encompassed 3 CTVs within gating-window at end-expiration plus SMs. The PTV volume and dose distribution were compared among different plans. Results: The PTV3D was the largest in all 12 patients, but still missed partial target volume in 5 patients when comparing with PTV4D. Both the 4D plans and the gated plans spared more normal tissues than the 3D plans, especially the liver. Without increasing normal tissue dose, the 4D plans allowed for increasing the calculated dose from (50.8 ± 2.0) Gy (3D plans) to (54.7 ± 3.3) Gy, and the gated plans could further increase the dose to (58.0 ± 3.9) Gy. Conclusions: The 4DCT-based plans can ensure optimal target coverage with less irradiation of normal tissues and allow dose escalation when compared with 3D plans. Respiratory gated radiotherapy can further reduce the target volumes to spare more surrounding tissues, especially for patients with large extent of respiratory mobility. (authors)

  19. Science, Technology and Social Change Course's Effects on Technological Literacy Levels of Social Studies Pre-Service Teachers

    Science.gov (United States)

    Yigit, E. Ozlem

    2013-01-01

    Social studies curricula are required in order to prepare to educate children who continue to learn after their formal training, and it is vital that teachers receive an education properly. In Social Studies Education Departments of Education Faculties Science, Technology and Social Change course is convenient to this aim and it contributes to…

  20. Market definition study of photovoltaic power for remote villages in developing countries

    Science.gov (United States)

    Ragsdale, C.; Quashie, P.

    1980-01-01

    The potential market of photovoltaic systems in remote village applications in developing countries is assessed. It is indicated that photovoltaic technology is cost-competitive with diesel generators in many remote village applications. The major barriers to development of this market are the limited financial resources on the part of developing countries, and lack of awareness of photovoltaics as a viable option in rural electrification. A comprehensive information, education and demonstration program should be established as soon as possible to convince the potential customer countries and the various financial institutions of the viability of photovoltaics as an electricity option for developing countries.