WorldWideScience

Sample records for technology current status

  1. Current Status of Concentrator Photovoltaic (CPV) Technology

    Energy Technology Data Exchange (ETDEWEB)

    Philipps, Simon P. [Fraunhofer Inst. for Solar Energy Systems ISE, Freiburg (Germany); Bett, Andreas W. [Fraunhofer Inst. for Solar Energy Systems ISE, Freiburg (Germany); Horowitz, Kelsey [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kurtz, Sarah [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-12-01

    This report summarizes the status of the concentrator photovoltaic (CPV) market and industry as well as current trends in research and technology. This report is intended to guide research agendas for Fraunhofer ISE, the National Renewable Energy Laboratory (NREL), and other R&D organizations. Version 1.1 of this report includes recent progress in CPV. The recent record module efficiency of 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve.

  2. Current Status of Nonvolatile Semiconductor Memory Technology

    Science.gov (United States)

    Fujisaki, Yoshihisa

    2010-10-01

    In this report, an overview of the current status of nonvolatile semiconductor memory technology is presented. We are reaching the integration limit of flash memories, and many new types of memories to replace conventional flash memories have been proposed. Unlike flash memories, new nonvolatile memories do not require electric charge storing. The possibility of phase-change random access memory (PRAM) or resistive-change RAM (ReRAM) replacing ultrahigh-density NAND flash memories has been discussed; however, there are many issues to overcome, making the replacement difficult. Nonetheless, ferroelectric RAMs (FeRAMs) and MRAMs are gradually penetrating into fields where the shortcomings of flash memories, such as high operating voltage, slow rewriting speed, and limited number of rewrites, make their use inconvenient. For the successful application of new nonvolatile semiconductor memories, they must be practically utilized in new fields in which flash memories are not applicable, and the technology for them must be developed.

  3. Sensing technology current status and future trends

    CERN Document Server

    Mukhopadhyay, Subhas; Jayasundera, Krishanthi; Bhattacharyya, Nabarun

    2014-01-01

    This book is written for academic and industry professionals working in the field of sensing, instrumentation and related fields, and is positioned to give a snapshot of the current state of the art in sensing technology, particularly from the applied perspective.  The book is intended to give a broad overview of the latest developments, in addition to discussing the process through which researchers go through in order to develop sensors, or related systems, which will become more widespread in the future.  

  4. Current Status of VHTR Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    David Petti; Hans Gougar; Richard Wright; William Windes; Steve Herring; Richard Schultz; Paul Humrickhouse

    2010-10-01

    Abstract – High Temperature Gas-cooled Reactors (HTGRs) featuring particle fuel reached the stage of commercial deployment in the mid-1980s with the Fort St.Vrain and Thorium HochTemperatur Reaktor feeding electricity to the grids in the United States and West Germany, respectively. The technology was then adopted by Japan and China with the operation of the High Temperature Test Reactor in Oarai, Japan and the High Temperature Reactor (HTR-10) in China. Increasing the outlet temperature of the HTGR to even higher temperatures above 900°C will improve the thermodynamic efficiency of the system and enable application of a new class of gas reactor, the very high temperature reactor, to provide process heat, electricity, and hydrogen to chemical industries with the attendant benefits of improved energy security and reduced CO2 emissions. However, the increase in coolant outlet temperature presents a number of technical challenges associated with fuel, materials, power conversion, and analysis methods for the reactor and hydrogen production. The U.S. Department of Energy is sponsoring a broad program of research and development with a goal of addressing the technical challenges over a broad range of outlet temperatures as part of the Next Generation Nuclear Plant Project. This paper describes the research and development activities that are currently underway to realize the technologies needed for an HTGR that features outlet temperatures of 750 to 950°C.

  5. Nanofluid Technology: Current Status and Future Research

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Stephen U.-S. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Technology Division

    1998-10-20

    Downscaling or miniaturization has been a recent major trend in modern science and technology. Engineers now fabricate microscale devices such as microchannel heat exchangers, and micropumps that are the size of dust specks. Further major advances would be obtained if the coolant flowing in the microchannels were to contain nanoscale particles to enhance heat transfer. Nanofluid technology will thus be an emerging and exciting technology of the 21st century. This paper gives a brief history of the Advanced Fluids Program at Argonne National Laboratory (ANL), discusses the concept of nanofluids, and provides an overview of the R&D program at ANL on the production, property characterization, and performance of nanofluids. It also describes examples of potential applications and benefits of nanofluids. Finally, future research on the fundamentals and applications of nanofluids is addressed.

  6. ZnO growth technologies: current status and perspectives

    International Nuclear Information System (INIS)

    Lupan, Oleg

    2011-01-01

    Development of new technologies for ZnO nano materials and thin films is of critical importance for further fundamental investigations and practical applications. We discuss on the main technical control of the synthesis of zinc oxide and its properties, which are of significance in understanding the growth mechanism and further developing ZnO-based devices. Next, we present a brief summary of recent research activities, current status and progress in developing improved control of technological processes for zinc oxide as advanced material.

  7. Current Status and Application of Hazard Definition Technology

    Science.gov (United States)

    Greene, George C.

    1997-01-01

    A research is performed: to define wake non-encounter & hazard, to provide requirements for sensors, and to obtain input from the user community. This research includes: validating wake encounter simulation models, establishing a metric to quantify the upset potential of a wake encounter, applying hazard metric and simulation models to the commercial fleet for development of candidate acceptable encounter limits, and applying technology to near term problems to evaluate current status of technology. The following lessons are learned from this project: technology is not adequate to determine absolute spacing requirements; time, not distance, determines the duration of the wake hazard; Optimum standards depend on the traffic; Wing span is an important parameter for characterizing both generator and follower; and Short span "biz jets" are easily rolled.

  8. Health technology assessment: principles, methods and current status.

    Science.gov (United States)

    Giovagnoni, A; Bartolucci, L; Manna, A; Morbiducci, J; Ascoli, G

    2009-08-01

    This paper analyses the methodological and technical aspects of health technology assessment (HTA) as a tool for evaluating health technologies and procedures, with special reference to diagnostic imaging; describes the main experiences with HTA at the international and national level; outlines the most important HTA projects in Italy, and analyses the effects of HTA on health care strategies and policies. The work was carried out in three phases. In the first phase, the authors analysed the principles, methods and instruments of HTA; in the second, they evaluated the current status of HTA in different countries; and in the third, they defined the impact of HTA on the decision-making process in health care. Since the 1970s, technological innovation has been accompanied by the development of methods for the multidisciplinary assessment of the technical, scientific, economic, ethical and social aspects inherent in the use of new technologies. The method is implemented at an international level by a network of public and private bodies that carry out HTA in support of health care policies. Because the application of HTA is still in its early stages in Italy, it is necessary to promote its development by drawing on consolidated international experiences.

  9. Current status of small specimen technology in Charpy impact testing

    International Nuclear Information System (INIS)

    Kurishita, H.; Kayano, H.; Narui, M.; Yamazaki, M.

    1994-01-01

    The current status of small-scale specimen technology in Charpy impact testing for ferritic steels is presented, with emphasis on the effect of the notch dimensions (notch depth, notch root radius and notch angle) on the upper shelf energy (USE) and ductile-to-brittle transition temperature (DBTT). The USE for miniaturized specimens, normalized by Bb 2 or (Bb) 3/2 (B is the specimen thickness, b the ligament size), is essentially independent of notch geometry and has a linear relationship with the USE of full size specimens, regardless of irradiation and alloy conditions. The DBTT of miniaturized specimens depends strongly on the notch dimensions; this dependence of the DBTT decreases as the DBTT of full size specimens increase due to neutron irradiation or thermal aging. These results may be useful in determining the USE and DBTT for full size specimens from those for miniaturized specimens. ((orig.))

  10. Current status of Chinese nuclear power industry and technology

    International Nuclear Information System (INIS)

    Kim, Hyun Min; Kim, Min; Jeong, Hee Jong; Hwang, Jeong Ki; Cho, Chung Hee

    1996-10-01

    China has been carrying out active international cooperation aiming to be a country where is to be an economical super power and an advanced country in nuclear power technology by the year early 2000, and China also has begun to be recognized as the largest potential market for the construction of nuclear power plants(NPPs) expecting to construct more than thirty nuclear power units by the year 2020. China has advanced technology in the basic nuclear science including liquid metal breeder reactor technology, nuclear material, medium and small size power plants, and isotope production technology, and also China has complete nuclear fuel cycle technology. However, China still has low NPP technology. Therefore, it is expected that China may have complementary cooperative relationship with China, it is expected that Korea may have an access to the advanced Chinese nuclear science technology, and may have a good opportunity to explore the Chinese market actively exporting excellent Korean NPP technology, and further may have a good position to the neighboring Asian countries' NPP markets. From this perspective, general Chinese social status, major nuclear R and D activity status, and correct NPP and technology status have been analyzed in this report, and this report is expected to be a useful resource for cooperating with China in future. 10 tabs., 6 figs., 16 refs. (Author)

  11. Current status of assisted reproductive technology in Korea, 2009.

    Science.gov (United States)

    Choi, Young Min; Chun, Sang Sik; Han, Hyuck Dong; Hwang, Jung Hye; Hwang, Kyung Joo; Kang, In Soo; Kim, Dong Won; Kim, Ki Chul; Kim, Tak; Kwon, Hyuck Chan; Lee, Won Don; Lee, Jung Ho; Lee, Kyu Sup; Lee, Gyoung Hoon; Lee, Sang-Hoon; Lee, Yu Il; Min, Eung Gi; Moon, Hwa Sook; Moon, Shin Yong; Roh, Sung Il; Yoon, Tae Ki

    2013-11-01

    Great advances have been made in the field of assisted reproductive technology (ART) since the first in vitro fertilization (IVF) baby was born in Korea in the year of 1985. However, it deserve to say that the invaluable data from fertility centers may serve as a useful source to find out which factors affect successful IVF outcome and to offer applicable information to infertile patients and fertility clinics. This article intended to report the status of ART in 2009 Korean Society of Obstetrics and Gynecology surveyed. The current survey was performed to assess the status and success rate of ART performed in Korea, between January 1 and December 31, 2009. Reporting forms had been sent out to IVF centers via e-mail, and collected by e-mail as well in 2012. With International Committee Monitoring Assisted Reproductive Technologies recommendation, intracytoplasmic sperm injection (ICSI) and non-ICSI cases have been categorized and also IVF-ET cases involving frozen embryo replacement have been surveyed separately. Seventy-four centers have reported the treatment cycles initiated in the year of 2009, and had performed a total of 27,947 cycles of ART treatments. Among a total of 27,947 treatment cycles, IVF and ICSI cases added up to 22,049 (78.9%), with 45.3% IVF without ICSI and 54.7% IVF with ICSI, respectively. Among the IVF and ICSI patients, patients confirmed to have achieved clinical pregnancy was 28.8% per cycle with oocyte retrieval, and 30.9% per cycle with embryo transfer. The most common number of embryos transferred in 2009 is three embryos (40.4%), followed by 2 embryos (28.4%) and a single embryo transferred (13.6%). Among IVF and ICSI cycles that resulted in multiple live births, twin pregnancy rate was 45.3% and triple pregnancy rate was 1.1%. A total of 191 cases of oocyte donation had been performed to result in 25.0% of live birth rate. Meanwhile, a total of 5,619 cases of frozen embryo replacement had been performed with 33.7% of clinical

  12. Current status of the laser diode array projector technology

    Science.gov (United States)

    Beasley, D. Brett; Saylor, Daniel A.

    1998-07-01

    This paper describes recent developments and the current status of the Laser Diode Array Projector (LDAP) Technology. The LDAP is a state-of-the-art dynamic infrared scene projector system capable of generating high resolution in-band infrared imagery at high frame rates. Three LDAPs are now operational at the U.S. Army Aviation and Missile Command's (AMCOM) Missile Research, Development, and Engineering Center (MRDEC). These projectors have been used to support multiple Hardware-in-the-Loop test entries of various seeker configurations. Seeker configurations tested include an InSb 256 X $256 focal-plane array (FPA), an InSb 512 X 512 FPA, a PtSi 640 X 480 FPA, a PtSi 256 X 256 FPA, an uncooled 320 X 240 microbolometer FPA, and two dual field- of-view (FOV) seekers. Several improvements in the projector technology have been made since we last reported in 1997. The format size has been increased to 544 X 544, and 672 X 512, and it has been proven that the LDAP can be synchronized without a signal from the unit-under test (UUT). The control software has been enhanced to provide 'point and click' control for setup, calibration, image display, image capture, and data analysis. In addition, the first long-wave infrared (LWIR) LDAP is now operational, as well as a dual field of view LDAP which can change its FOV within 0.25 seconds. The projector is interfaced to a Silicon Graphics scene generation computer which is capable of real-time 3-D scene generation. Sample images generated with the projector and captured by an InSb FPA sensor are included in the text.

  13. Advanced fuel technology and performance: Current status and trends

    International Nuclear Information System (INIS)

    1990-11-01

    During the last years the Nuclear Fuel Cycle and Waste Management Division of the IAEA has been giving great attention to the collection, analysis and exchange of information in the field of reactor fuel technology. Most of these activities are being conducted in the framework of the International Working Group on Water Reactor Fuel Performance and Technology (IWGFPT). The purpose of this Advisory Group Meeting on Advanced Fuel Technology and Performance was to update and to continue the previous work, and to review the experience of advanced fuel technology, its performance with regard to all types of reactors and to outline the future trends on the basis of national experience and discussions during the meeting. As a result of the meeting a Summary Report was prepared which reflected the status of the advanced nuclear fuel technology up to 1990. The 10 papers presented by participants of this meeting are also published here. A separate abstract was prepared for each of these papers. Refs, figs and tabs

  14. Current status of technology development on remote monitoring system

    International Nuclear Information System (INIS)

    Yoon, Wan Ki; Lee, Y. K.; Lee, Y. D.; Na, W. W.

    1997-03-01

    IAEA is planning to perform the remote monitoring system in nuclear facility in order to reinforce the economical and efficient inspection. National lab. in U.S. is developing the corresponding core technology and field trial will be done to test the remote monitoring system by considering the case that it replace the current safeguards system. U.S. setup the International Remote Monitoring Project to develop the technology. IAEA makes up remote monitoring team and setup the detail facility to apply remote monitoring system. Therefore, early participation in remote monitoring technology development will make contribution in international remote monitoring system and increase the transparency and confidence in domestic nuclear activities. (author). 12 refs., 20 figs

  15. Advanced clean coal technology international symposium 2001. Current status of high efficiency coal utilization technology and coal ash utilization

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    Papers are presented under the following session headings: current status of coal utilization technology; movement for environmental control in the USA, EU and Japan; and coal combustion products utilization technologies.

  16. Ceramic technologies for automotive industry: Current status and perspectives

    International Nuclear Information System (INIS)

    Okada, Akira

    2009-01-01

    The automotive industry has developed substantially through advances in mechanical technologies, and technologies such as electronics and advanced materials have also contributed to further advances in automobiles. The contribution of ceramic materials to automobile technologies ranges over driving performance, exhaust gas purification, and fuel efficiency improvements. Several ceramic components, such as knock sensors, oxygen sensors, exhaust gas catalysts, and silicon nitride parts for automotive engines, have been successfully applied to automobiles. This paper focuses on the contribution of ceramics to automotive technologies. It also mentions potential contributions in the future, including adiabatic turbo-compound diesels, ceramic gas turbines, fuel cells, and electric vehicles because ceramic technologies have been intensively involved in the challenge to achieve advanced power sources.

  17. Current Status of Helium-3 Alternative Technologies for Nuclear Safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Henzlova, Daniela [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kouzes, R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McElroy, R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Peerani, P. [European Commission, Ispra (Italy). Joint Research Centre; Aspinall, M. [Hybrid Instruments Ltd., Birmingham (United Kingdom); Baird, K. [Intl Atomic Energy Agency (IAEA), Vienna (Austria); Bakel, A. [National Nuclear Security Administration (NNSA), Washington, DC (United States); Borella, M. [SCK.CEN, Mol (Belgium); Bourne, M. [Univ. of Michigan, Ann Arbor, MI (United States); Bourva, L. [Canberra Ltd., Oxford (United Kingdom); Cave, F. [Hybrid Instruments Ltd., Birmingham (United Kingdom); Chandra, R. [Arktis Radiation Detectors Ltd., Zurich (Sweden); Chernikova, D. [Chalmers Univ. of Technology (Sweden); Croft, S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Dermody, G. [Symetrica Inc., Maynard, MA (United States); Dougan, A. [National Nuclear Security Administration (NNSA), Washington, DC (United States); Ely, J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fanchini, E. [Istituto Nazionale di Fisica Nucleare (INFN), Milano (Italy); Finocchiaro, P. [Istituto Nazionale di Fisica Nucleare (INFN), Milano (Italy); Gavron, Victor [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kureta, M. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Ianakiev, Kiril Dimitrov [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ishiyama, K. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Lee, T. [Intl Atomic Energy Agency (IAEA), Vienna (Austria); Martin, Ch. [Symetrica Inc., Maynard, MA (United States); McKinny, K. [GE Reuter-Stokes, Twinsburg, OH (United States); Menlove, Howard Olsen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Orton, Ch. [National Nuclear Security Administration (NNSA), Washington, DC (United States); Pappalardo, A. [Istituto Nazionale di Fisica Nucleare (INFN), Milano (Italy); Pedersen, B. [European Commission, Ispra (Italy). Joint Research Centre; Peranteau, D. [National Nuclear Security Administration (NNSA), Washington, DC (United States); Plenteda, R. [Intl Atomic Energy Agency (IAEA), Vienna (Austria); Pozzi, S. [Univ. of Michigan, Ann Arbor, MI (United States); Schear, M. [Symetrica Inc., Maynard, MA (United States); Seya, M. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Siciliano, E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stave, S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sun, L. [Proportional Technologies Inc., Houston, TX (United States); Swinhoe, Martyn Thomas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Tagziria, H. [European Commission, Ispra (Italy). Joint Research Centre; Vaccaro, S. [DG Energy (Luxembourg); Takamine, J. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Weber, A. -L. [Inst. for Radiological Protection and Nuclear Safety (IRSN), Fontenay-aux-Roses (France); Yamaguchi, T. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Zhu, H. [National Nuclear Security Administration (NNSA), Washington, DC (United States)

    2015-12-01

    International safeguards inspectorates (e.g., International Atomic Energy Agency {IAEA}, or Euratom) rely heavily on neutron assay techniques, and in particular, on coincidence counters for the verification of declared nuclear materials under safeguards and for monitoring purposes. While 3He was readily available, the reliability, safety, ease of use, gamma-ray insensitivity, and high intrinsic thermal neutron detection efficiency of 3He-based detectors obviated the need for alternative detector technologies. However, the recent decline of the 3He gas supply has triggered international efforts to develop and field neutron detectors that make use of alternative materials. In response to this global effort, the U.S. Department of Energy’s (DOE) National Nuclear Security Administration (NNSA) and Euratom launched a joint effort aimed at bringing together international experts, technology users and developers in the field of nuclear safeguards to discuss and evaluate the proposed 3He alternative materials and technologies. The effort involved a series of two workshops focused on detailed overviews and viability assessments of various 3He alternative technologies for use in nuclear safeguards applications. The key objective was to provide a platform for collaborative discussions and technical presentations organized in a compact, workshop-like format to stimulate interactions among the participants. The meetings culminated in a benchmark exercise providing a unique opportunity for the first inter-comparison of several available alternative technologies. This report provides an overview of the alternative technology efforts presented during the two workshops along with a summary of the benchmarking activities and results. The workshop recommendations and key consensus observations are discussed in the report, and used to outline a proposed path forward and future needs foreseeable in the area of 3

  18. Indian fast reactor technology: Current status and future programme

    Indian Academy of Sciences (India)

    radioactivity release from the waste would be insignificant (natural background level) within about 300 years. .... India's requirements. The peak power level achieved briefly, with such premature use of tho- .... in science, design, safety and technology, especially in fuels and core structural materials and instrumentation ...

  19. Indian fast reactor technology: Current status and future programme

    Indian Academy of Sciences (India)

    The challenges and achievements in science and technology of FBRs focusing on safety are described with the particular reference to 500 MWe capacity Prototype Fast Breeder Reactor (PFBR), being commissioned at Kalpakkam. Roadmap with comprehensive R&D for the large scale deployment of Sodium Cooled Fast ...

  20. Clean Coal Technologies in China: Current Status and Future Perspectives

    Directory of Open Access Journals (Sweden)

    Shiyan Chang

    2016-12-01

    Full Text Available Coal is the dominant primary energy source in China and the major source of greenhouse gases and air pollutants. To facilitate the use of coal in an environmentally satisfactory and economically viable way, clean coal technologies (CCTs are necessary. This paper presents a review of recent research and development of four kinds of CCTs: coal power generation; coal conversion; pollution control; and carbon capture, utilization, and storage. It also outlines future perspectives on directions for technology research and development (R&D. This review shows that China has made remarkable progress in the R&D of CCTs, and that a number of CCTs have now entered into the commercialization stage.

  1. Current status and application of fine screening technology in China

    Science.gov (United States)

    Chernova, E. V.; Chernov, D. V.

    2017-10-01

    The paper presents data on the design and technical parameters of high frequency vibrating screens, which are produced by Chinese manufacturer - company Landsky Tech Ltd. The technology of high frequency vibration is widely used at mining and metallurgical industries to separate fine and ultra-fine particles from the flow of dry material or pulp. The paper contains different types of screening systems, description, advantages and disadvantages of equipment and test results from mineral processing plants.

  2. The current status of coal liquefaction technologies - Panorama 2008

    International Nuclear Information System (INIS)

    2008-01-01

    In 2008, a first coal liquefaction unit to produce motor fuel (20,000 BPSD) will come on-stream in Shenhua, China (in the Ercos region of Inner Mongolia). Other, more ambitious projects have been announced in China for between now and 2020. Since oil production is expected to peak in the medium term, this technology may develop regionally in the next 20 years to cover ever-increasing demand for motor fuel

  3. Review of the current status of CRT technologies

    Science.gov (United States)

    Tong, Hua-Sou; Hu, Chun-Min

    1995-09-01

    Color cathode ray tubes (CRT) have been dominating the display market for more than forty years. The unique advantages, such as high brightness, very wide viewing angle, and excellent color purity, makes all other display devices very difficult to compete with. Meanwhile, to improve the performance of CRTs and to meet the challenge of large size CRTs, modifications have been made on all components including shadow mask, bulb design, electron gun design, and yoke design. Basically, the technology improvements can be categorized into two areas: structure and ergonomics. Structurally, efforts have been concentrating towards a flatter faceplate and a finer pitch. These improvements lead to the extensive uses of low thermal expansion shadow mask and higher resolution gun design. An alternative improvement is the introduction of tensioned mask CRTs. In the area of ergonomics, efforts are focusing on the improvements of contrast and resolutions such as the introduction of antireflective and antistatic function on the faceplate. Details will be presented in this ppaer.

  4. Current Status on Stress Diagnostic Kit and Detection Technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Hyun; Choi, Mi Hee; Ko, Kyong Cheol

    2008-06-15

    The accurate measurement of a stress level is one of the most important issues in a stress diagnosis and its measurement could be of great value in clinical medicine. Stress has a potent effect on the spirit and physical condition of an individual. There are various methods available for its measurement. Some of the commonly used techniques for the diagnosis of a stress level include analysis of the body fluids, questionnaire assessments, psychophysiological evaluations and by determining heart rate variability (HRV) of subjects. However, the existing diagnostic methods have several defects like, a low sensitivity, inaccuracy and long of operation time. In this report, we present a diagnostic technology to detect a stress level which is the origin of various diseases. This method can be of great help in providing an early diagnosis through a biosensor and might play a vital role in preventing diseases like hypochondria and hypertension. Majority of the human population is exposed to stress in one way or another and hence developing a convenient stress diagnosis kit will be of great use to all. This stress diagnostic kit and detection technology dose not involve simple a mechanical measurement or questionnaires, but is based on developing a detection kit with a high sensitivity, which will mean an easy use for common man. Individuals can undergo regular check ups and can personally diagnose their present situation of health by determining their stress levels, thus enabling them to diagnose the early onset of several stress disorders. This might help them take precautionary measures and thereby lead to a healthy life.

  5. Current status and perspectives of genome editing technology for microalgae.

    Science.gov (United States)

    Jeon, Seungjib; Lim, Jong-Min; Lee, Hyung-Gwan; Shin, Sung-Eun; Kang, Nam Kyu; Park, Youn-Il; Oh, Hee-Mock; Jeong, Won-Joong; Jeong, Byeong-Ryool; Chang, Yong Keun

    2017-01-01

    Genome editing techniques are critical for manipulating genes not only to investigate their functions in biology but also to improve traits for genetic engineering in biotechnology. Genome editing has been greatly facilitated by engineered nucleases, dubbed molecular scissors, including zinc-finger nuclease (ZFN), TAL effector endonuclease (TALEN) and clustered regularly interspaced palindromic sequences (CRISPR)/Cas9. In particular, CRISPR/Cas9 has revolutionized genome editing fields with its simplicity, efficiency and accuracy compared to previous nucleases. CRISPR/Cas9-induced genome editing is being used in numerous organisms including microalgae. Microalgae have been subjected to extensive genetic and biological engineering due to their great potential as sustainable biofuel and chemical feedstocks. However, progress in microalgal engineering is slow mainly due to a lack of a proper transformation toolbox, and the same problem also applies to genome editing techniques. Given these problems, there are a few reports on successful genome editing in microalgae. It is, thus, time to consider the problems and solutions of genome editing in microalgae as well as further applications of this exciting technology for other scientific and engineering purposes.

  6. Decontamination and decommissioning technology tree and the current status of the technologies

    International Nuclear Information System (INIS)

    Oh, Won Zin; Won, H. J.; Kim, G. N.; Lee, K. W.; Chol, W. K.; Jung, C. H.; Kim, C. J.; Kim, S. H.; Kwon, S. O.; Chung, C. M.

    2001-03-01

    A technology tree diagram was developed on the basis of the necessary technologies applicable to the decontamination and decommissioning of nuclear facilities. The technology tree diagram is consist of 6 main areas such as characterization, decontamination, decommissioning and remote technology, radwaste management, site restoration, and decommissioning plan and engineering. Characterization is divided into 4 regions such as sampling and data collection, general characterization, chemical analysis and radiological analysis. Decontamination is also divided into 4 regions such as chemical decontamination, mechanical decontamination, the other decontamination technologies and new decontamination technologies. Decommissioning and remote technology area is divided into 4 regions such as cutting techniques, decommissioning technologies, new developing technologies and remote technologies. Radwaste management area is divided into 5 regions such as solid waste treatment, sludge treatment, liquid waste treatment, gas waste treatment and thermal treatment. Site restoration area is divided into 3 regions such as the evaluation of site contamination, soil decontamination and ground water decontamination. Finally, permission, decommissioning process, cost evaluation, quality assurance and the estimation of radionuclide inventory were mentioned in the decommissioning plan and engineering area. The estimated items for each technology are applicable domestic D and D facilities, D and D problem area and contamination/requirement, classification of D and D technology, similar technology, principle and overview of technology, status, science technology needs, implementation needs, reference and contact point

  7. Decontamination and decommissioning technology tree and the current status of the technologies

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Won Zin; Won, H.J.; Kim, G.N.; Lee, K.W.; Chol, W.K.; Jung, C.H.; Kim, C.J.; Kim, S.H.; Kwon, S.O.; Chung, C.M

    2001-03-01

    A technology tree diagram was developed on the basis of the necessary technologies applicable to the decontamination and decommissioning of nuclear facilities. The technology tree diagram is consist of 6 main areas such as characterization, decontamination, decommissioning and remote technology, radwaste management, site restoration, and decommissioning plan and engineering. Characterization is divided into 4 regions such as sampling and data collection, general characterization, chemical analysis and radiological analysis. Decontamination is also divided into 4 regions such as chemical decontamination, mechanical decontamination, the other decontamination technologies and new decontamination technologies. Decommissioning and remote technology area is divided into 4 regions such as cutting techniques, decommissioning technologies, new developing technologies and remote technologies. Radwaste management area is divided into 5 regions such as solid waste treatment, sludge treatment, liquid waste treatment, gas waste treatment and thermal treatment. Site restoration area is divided into 3 regions such as the evaluation of site contamination, soil decontamination and ground water decontamination. Finally, permission, decommissioning process, cost evaluation, quality assurance and the estimation of radionuclide inventory were mentioned in the decommissioning plan and engineering area. The estimated items for each technology are applicable domestic D and D facilities, D and D problem area and contamination/requirement, classification of D and D technology, similar technology, principle and overview of technology, status, science technology needs, implementation needs, reference and contact point.

  8. Current status and prospect of radiation technology for the safety and security of food

    Energy Technology Data Exchange (ETDEWEB)

    Byun, Myung Woo [Korean Society of Radiation Industry, Jeongeup (Korea, Republic of)

    2009-09-15

    Since 1960, radiation technology (RT), which had been known as the method eliminating the biologically hazardous factors of the products in the food, medical, pharmaceutical and cosmetic industries, was comprehensively investigated. The safety of food irradiation has been throughout evaluated with scientific experiments. Recently, RT has been associated with other high technologies such as biotechnology and nanotechnology, and resulted in the innovative products. Through these fusion technology with RT, the new items with high functionality and value will be shown. But, until now, consumers' acceptance on radiation is still the problem to be solved for further development. To make the consumer correctly understand RT, the benefits and defects of RT should be informed and there should be the legislated policy for the industrialization of RT by government. Therefore, this review will introduce the current status of food irradiation in the world, the safety and national agreements and the recent results from radiation fusion technology, and suggest the further work.

  9. Current status and prospect of radiation technology for the safety and security of food

    International Nuclear Information System (INIS)

    Byun, Myung Woo

    2009-01-01

    Since 1960, radiation technology (RT), which had been known as the method eliminating the biologically hazardous factors of the products in the food, medical, pharmaceutical and cosmetic industries, was comprehensively investigated. The safety of food irradiation has been throughout evaluated with scientific experiments. Recently, RT has been associated with other high technologies such as biotechnology and nanotechnology, and resulted in the innovative products. Through these fusion technology with RT, the new items with high functionality and value will be shown. But, until now, consumers' acceptance on radiation is still the problem to be solved for further development. To make the consumer correctly understand RT, the benefits and defects of RT should be informed and there should be the legislated policy for the industrialization of RT by government. Therefore, this review will introduce the current status of food irradiation in the world, the safety and national agreements and the recent results from radiation fusion technology, and suggest the further work

  10. Current status of development in dry pyro-electrochemical technology of SNF reprocessing

    International Nuclear Information System (INIS)

    Bychkov, A.V.; Skiba, O.V.; Kormilitsyn, M.V.

    2004-01-01

    The technology of SNF management in molten salts currently developed by a group of institutes headed by RIAR has had several stages of development: - basic research of uranium, plutonium and main FP properties (investigation and reprocessing of different kinds of SNF in 1960 - 1970); - development of the equipment and implementation of the pyro-electrochemical technology of granulated UPu fuel production. Development of the vibro-packing method and in-pile testing of vibro-packed fuel pins with granulated fuel as the most 'logical' continuation of reprocessing: implementation of the technology for BOR-60 and BN-600 (1980 - 1990); - development of closed fuel cycle elements. Checking of the technology using batches of SNF. In-pile tests. Feasibility study of the closed fuel cycle (CFC). Study of application of the technology to other objects (transmutation; nitride, cermet and other fuels) (1980 - 1990). The current status of the research is the following: - Basic research. Properties of uranium, plutonium, thorium, and neptunium in chloride melts have been studied in much detail. The data on physical chemistry and electrochemistry of the main FP is enough for understanding the processes. Detailed studies of americium, curium, and technetium chemistry are the essential investigation directions; - Engineering development. The technology and equipment bases have been developed for the processes of oxide fuel reprocessing and fabrication. The technology was checked using 5500 kg of pure fuel from different reactors and 20 kg of irradiated BN-350 and BOR-60 fuel. The bases of the technology have been provided and the feasibility study has been carried out for a full-scale plant of BN-800 CFC; - Industrial application: Since the technology is highly prepared, the activities on industrial application of U-Pu fuel are now underway. The BOR-60 reactor uses fuel obtained by the dry method, the design of the facility for implementation of CFC reactors is being developed. 9

  11. Recycling of waste printed circuit boards: a review of current technologies and treatment status in China.

    Science.gov (United States)

    Huang, Kui; Guo, Jie; Xu, Zhenming

    2009-05-30

    From the use of renewable resources and environmental protection viewpoints, recycling of waste printed circuit boards (PCBs) receives wide concerns as the amounts of scrap PCBs increases dramatically. However, treatment for waste PCBs is a challenge due to the fact that PCBs are diverse and complex in terms of materials and components makeup as well as the original equipment's manufacturing processes. Recycle technology for waste PCBs in China is still immature. Previous studies focused on metals recovery, but resource utilization for nonmetals and further separation of the mixed metals are relatively fewer. Therefore, it is urgent to develop a proper recycle technology for waste PCBs. In this paper, current status of waste PCBs treatment in China was introduced, and several recycle technologies were analyzed. Some advices against the existing problems during recycling process were presented. Based on circular economy concept in China and complete recycling and resource utilization for all materials, a new environmental-friendly integrated recycling process with no pollution and high efficiency for waste PCBs was provided and discussed in detail.

  12. The Current Status of Usability Studies of Information Technologies in China: A Systematic Study

    Directory of Open Access Journals (Sweden)

    Jianbo Lei

    2014-01-01

    Full Text Available Objectives. To systematically review and analyze the current status and characteristics of usability studies in China in the field of information technology in general and in the field of healthcare in particular. Methods. We performed a quantitative literature analysis in three major Chinese academic databases and one English language database using Chinese search terms equivalent to the concept of usability. Results. Six hundred forty-seven publications were selected for analysis. We found that in China the literature on usability in the field of information technology began in 1994 and increased thereafter. The usability definitions from ISO 9241-11:1998 and Nielsen (1993 have been widely recognized and cited. Authors who have published several publications are rare. Fourteen journals have a publishing rate over 1%. Only nine publications about HIT were identified. Discussions. China’s usability research started relatively late. There is a lack of organized research teams and dedicated usability journals. High-impact theoretical studies are scarce. On the application side, no original and systematic research frameworks have been developed. The understanding and definition of usability is not well synchronized with international norms. Besides, usability research in HIT is rare. Conclusions. More human and material resources need to be invested in China’s usability research, particularly in HIT.

  13. The current status of usability studies of information technologies in China: a systematic study.

    Science.gov (United States)

    Lei, Jianbo; Xu, Lufei; Meng, Qun; Zhang, Jiajie; Gong, Yang

    2014-01-01

    To systematically review and analyze the current status and characteristics of usability studies in China in the field of information technology in general and in the field of healthcare in particular. We performed a quantitative literature analysis in three major Chinese academic databases and one English language database using Chinese search terms equivalent to the concept of usability. Six hundred forty-seven publications were selected for analysis. We found that in China the literature on usability in the field of information technology began in 1994 and increased thereafter. The usability definitions from ISO 9241-11:1998 and Nielsen (1993) have been widely recognized and cited. Authors who have published several publications are rare. Fourteen journals have a publishing rate over 1%. Only nine publications about HIT were identified. China's usability research started relatively late. There is a lack of organized research teams and dedicated usability journals. High-impact theoretical studies are scarce. On the application side, no original and systematic research frameworks have been developed. The understanding and definition of usability is not well synchronized with international norms. Besides, usability research in HIT is rare. More human and material resources need to be invested in China's usability research, particularly in HIT.

  14. Teleradiology - current status

    International Nuclear Information System (INIS)

    Baltadjiev, D.; Charakchiev

    2000-01-01

    Tele-radiology is a term becoming increasingly popular in the medical literature. Nevertheless, terminological definitions in this particular field are still rather vague. The scope of applications extend from simple image presenting via analogue telephone lines to transmission of 3-D medical images through a satellite. It is a matter of standards highly differing in terms of data transmission rates, safety, technical demands on the systems and the like. In this article new information technologies, technical aspects, as well as some major applications of tele-radiology are discussed. The current status of tele-medicine/tele-radiology in this country is likewise briefly outlined

  15. EHV systems technology - A look at the principles and current status. [Electric and Hybrid Vehicle

    Science.gov (United States)

    Kurtz, D. W.; Levin, R. R.

    1983-01-01

    An examination of the basic principles and practices of systems engineering is undertaken in the context of their application to the component and subsystem technologies involved in electric and hybrid vehicle (EHV) development. The limitations of purely electric vehicles are contrasted with hybrid, heat engine-incorporating vehicle technology, which is inherently more versatile. A hybrid vehicle concept assessment methodology is presented which employs current technology and yet fully satisfies U.S. Department of Energy petroleum displacement goals.

  16. Biogas technology dissemination in Ghana: history, current status, future prospects, and policy significance

    Energy Technology Data Exchange (ETDEWEB)

    Bensah, Edem Cudjoe [Chemical Engineering Department, Kumasi Polytechnic, Box 854, Kumasi (Ghana); Brew-Hammond, Abeeku [Faculty of Mechanical and Agricultural Engineering, Kwame Nkrumah University of Science and Technology (KNUST), Private Mail Bag, Kumasi (Ghana)

    2010-07-01

    Despite numerous benefits derived from biogas technology, Ghana is yet to develop a major programme that will promote the dissemination of biogas plants on a larger scale. This paper reviews biogas installations in Ghana and investigates challenges facing the design, construction, and operation of biogas plants. It further captures the current status and functions of biogas plants as well as the impact of these plants on the people who use them. The study was done by surveying fifty (50) biogas installations, and conducting interviews with both plant users and service providers. From the survey, twenty-nine (58 %) installations were institutional, fourteen (28 %) were household units, and the remaining seven (14 %) were community plants. Fixed-dome and water-jacket floating-drum digesters represented 82 % and 8 % of installations surveyed, respectively. It was revealed that sanitation was the main motivational reason for people using biogas plants. Of the 50 plants, 22 (44 %) were functioning satisfactorily, 10 (20 %) were functioning partially, 14 (28 %) were not functioning, 2 (4 %) were abandoned, and the remaining 2 (4 %) were under construction. Reasons for non-functioning include non-availability of dung, breakdown of balloon gasholders, absence of maintenance services, lack of operational knowledge, and gas leakages and bad odour in toilet chambers of biolatrines. This paper recommends the development of a national biogas programme focussing on three major areas -- sanitation, energy, and agricultural fertilizer production; it further supports the development of standardized digester models. The founding of a national body or the establishment of a dedicated unit within an existing organization with the sole aim of coordinating and managing biogas dissemination in Ghana is proposed.

  17. A review on the current status and production technology of 32,33P-orthophosphoric acid

    International Nuclear Information System (INIS)

    Park, Ul Jae; Han, Hyun Soo; Cho, Woon Kap; Kuznetsov, Rostislav A.

    2000-10-01

    The current status of 32 , 33 P-Orthophosphoric acid production technology is reviewed. The following aspects of the technology are covered: - production of phosphorus-32 and phosphorus-33 using various nuclear reactions; - chemical properties of sulfur and phosphorus effecting the technology of radioactive phosphorus production; - chemical state of 32 , 33 P in neutron irradiated sulfur; - the technology of radioactive phosphorus isolation from neutron irradiated target and orthophosphoric acid production; - purification of 32 , 33 P-orthophosphoric acid from impurities and some related problems, like the nature of impurities, the storage of the final product, etc. - the quality control procedures of carrier-free ( 32 , 33 P)-orthophosphoric acid preparations

  18. Current status of 700 MWe class PHWR NSSS design and engineering technology

    International Nuclear Information System (INIS)

    Park, Tae Keun; Suh, Sung Ki

    1996-06-01

    The capability of NSSS design and engineering technology of KAERI for 700 MWe class PHWR (CANDU 6) as of 1996 March 30 is comprehensively summarized in this report. The design and engineering capability of KAERI which have been gained during the implementation of Wolsung 2, 3 and 4 project are assessed, and showed with tangible scale. The status of Technology Transfer Materials received from Atomic Energy of Canada Limited under the Technology Transfer Agreement (TTA) which is effective simultaneously to Wolsung 3 and 4 contract, is also given in this report. The division of responsibility (DOR) of KAERI for Wolsung 2 and Wolsung 3 and 4 contract is also given, and expansion of DOR from Wolsung 2 contract to Wolsung 3 and 4 is presented. 3 refs. (Author)

  19. Current status, new frontiers and challenges in radiation biodosimetry using cytogenetic, transcriptomic and proteomic technologies

    Energy Technology Data Exchange (ETDEWEB)

    Fenech, Michael, E-mail: michael.fenech@csiro.au [Commonwealth Scientific and Industrial Research Organisation, Gate 13 Kintore Avenue, Adelaide, SA 5000 (Australia)

    2011-09-15

    Biodosimetric methods for determining exposure dose in individuals following a radiation accident are important for the health management of the exposed cohort and prioritisation of high dose exposure cases to receive emergency medical treatment. This brief review provides a succinct outline of (i) the current status of standard cytogenetic methods used in radiation biodosimetry; (ii) development of high-throughput systems for current standard cytogenetic methods; (iii) emerging minimally invasive methods; (iv) the impact of nutrition and genotype on observed dose-response relationships and (v) new frontiers in biodosimetry using molecular biology techniques such as transcriptomics and proteomics.

  20. Current status of radon and radium monitoring at the Federal University of Technology (UTFPR), PR, Brazil

    International Nuclear Information System (INIS)

    Paschuk, Sergei A.; Correa, Janine N.; Kappke, Jaqueline; Schelin, Hugo R.; Denyak, Valeriy; Barbosa, Laercio; Perna, Allan F.N.

    2011-01-01

    Numerous and systematic studies performed in different countries for many decades resulted in the explicit conclusion that radon exposure, as well as its progeny, is the main cause of lung cancer among non-smokers. All three natural radon isotopes ( 222 Rn, 220 Rn and 219 Rn) are produced in the three principal natural radioactive decay chains. Specifically, the 222 Rn is produced by the decay series of 238 U and proceeded from α-decay of 226 Ra. Current work describes the present status and obtained results concerning indoor radon survey in dwellings, radon in water supply and soil gas tests performed by the Laboratory of Applied Nuclear Physics of the Federal University of Technology (UTFPR) within Curitiba urban area. For radon in air activity measurements, it was used polycarbonate etched track detectors such as LEXAN (GE) and CR-39, mounted in diffusion chambers. For soil gas measurements, the experimental setup was based on the Professional Radon Monitor (AlphaGUARD, Genitron/SAPHYMO) connected to the air pump with filter vessels and to specially developed in our Laboratory the Soil Gas Probe. In the case of radon tests in drinking water, the experimental setup was based on the AlphaGUARD Radon monitor and Electronic radon detector RAD7 (Durridge Company, Inc.) connected to special kit of glass vessels through the air pump. Obtained results permitted to identify few dwellings where radon concentration in air was found bigger than 600 Bq/m 3 which is considered as the action level by most of the European Community and the World Health Organization (WHO). In the case of studied artesian wells, collected samples of water presented the average 222 Rn activity about 60 Bq/L which is 6 times bigger than maximum level recommended by USEPA. Some artesian wells presented the radon activity of almost 200 Bq/L. More over, it was identified the radioactivity of radium ( 226 Ra) salts which are soluble in water and almost all water samples presented results bigger than

  1. Advances for prosthetic technology from historical perspective to current status to future application

    CERN Document Server

    LeMoyne, Robert

    2016-01-01

    This book focuses on the advances in transtibial prosthetic technology and targets research in the evolution of the powered prosthesis such as the BiOM, which was derived from considerable research and development at the Massachusetts Institute of Technology. The concept of the book spans the historical evolution of prosthetic applications from passive to new and futuristic robotic prosthetic technologies.  The author describes the reasons for amputation, surgical procedures, and an historical perspective of the prosthesis for the lower limb. He also addresses the phases and sub-phases of gait and compensatory mechanisms arising for a transtibial prosthesis and links the compensatory mechanisms to long-term morbidities.  The general technologies for gait analysis central to prosthetic design and the inherent biomechanics foundations for analysis are also explored.  The book reports on recent-past to current-term applications with passive elastic prostheses.  The core of the book deals with futuristic robo...

  2. CO2 capture technologies: current status and new directions using supported ionic liquid phase (SILP) absorbers

    DEFF Research Database (Denmark)

    Kolding, Helene; Fehrmann, Rasmus; Riisager, Anders

    2012-01-01

    Current state-of-the-art techniques for CO2 capture are presented and discussed. Post-combustion capture of CO2 by absorption is the technology most easily retrofitted to existing installations, but at present this is not economically viable to install and run. Using ionic liquids instead...... of aqueous amine solutions overcomes the major thermodynamic issues. By applying SILP technology further advances, in terms of ease of handling and sorption dynamics, are obtained. Initial experimental studies showed that ionic liquids such as tetrahexylammonium prolinate, [N6666][Pro], provide a good...... candidate for CO2 absorption using SILP technology. Thus a solid SILP absorber comprised of 40 wt% [N6666][Pro] loaded on precalcined silica quantitatively takes up about 1.2 mole CO2 per mole of ionic liquid in consecutive absorption-desorption cycles in a flow-experiment performed with 0.09 bar of CO2 (9...

  3. Current status of selected oral peptide technologies in advanced preclinical development and in clinical trials.

    Science.gov (United States)

    Aguirre, T A S; Teijeiro-Osorio, D; Rosa, M; Coulter, I S; Alonso, M J; Brayden, D J

    2016-11-15

    The development of oral dosage forms that allows absorption of therapeutic peptides to the systemic circulation is one of the greatest challenges for the pharmaceutical industry. Currently, a number of technologies including either mixtures of penetration enhancers or protease inhibitors and/or nanotechnology-based products are under clinical development. Typically, these formulations are presented in the form of enteric-coated tablets or capsules. Systems undergoing preclinical investigation include further advances in nanotechnology, including intestinal microneedle patches, as well as their combination with regional delivery to the colon. This review critically examines four selected promising oral peptide technologies at preclinical stage and the twelve that have progressed to clinical trials, as indicated in www.clinicaltrials.gov. We examined these technologies under the criteria of peptide selection, formulation design, system components and excipients, intestinal mechanism of action, efficacy in man, and safety issues. The conclusion is that most of the technologies in clinical trials are incremental rather than paradigm-shifting and that even the more clinically advanced oral peptide drugs examples of oral bioavailability appear to yield oral bioavailability values of only 1-2% and are, therefore, only currently suitable for a limited range of peptides. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Current status and future development of modular high temperature gas cooled reactor technology

    International Nuclear Information System (INIS)

    2001-02-01

    This report includes an examination of the international activities with regard to the development of the modular HTGR coupled to a gas turbine. The most significant of these gas turbine programmes include the pebble bed modular reactor (PBMR) being designed by ESKOM of South Africa and British Nuclear Fuels plc. (BNFL) of the United Kingdom, and the gas turbine-modular helium reactor (GT-MHR) by a consortium of General Atomics of the United States of America, MINATOM of the Russian Federation, Framatome of France and Fuji Electric of Japan. Details of the design, economics and plans for these plants are provided in Chapters 3 and 4, respectively. Test reactors to evaluate the safety and general performance of the HTGR and to support research and development activities including electricity generation via the gas turbine and validation of high temperature process heat applications are being commissioned in Japan and China. Construction of the high temperature engineering test reactor (HTTR) by the Japan Atomic Energy Research Institute (JAERI) at its Oarai Research Establishment has been completed with the plant currently in the low power physics testing phase of commissioning. Construction of the high temperature reactor (HTR-10) by the Institute of Nuclear Energy Technology (INET) in Beijing, China, is nearly complete with initial criticality expected in 2000. Chapter 5 provides a discussion of purpose, status and testing programmes for these two plants. In addition to the activities related to the above mentioned plants, Member States of the IWGGCR continue to support research associated with HTGR safety and performance as well as development of alternative designs for commercial applications. These activities are being addressed by national energy institutes and, in some projects, private industry, within China, France, Germany, Indonesia, Japan, the Netherlands, the Russian Federation, South Africa, United Kingdom and the USA. Chapter 6 includes details

  5. Food waste-to-energy conversion technologies: current status and future directions.

    Science.gov (United States)

    Pham, Thi Phuong Thuy; Kaushik, Rajni; Parshetti, Ganesh K; Mahmood, Russell; Balasubramanian, Rajasekhar

    2015-04-01

    Food waste represents a significantly fraction of municipal solid waste. Proper management and recycling of huge volumes of food waste are required to reduce its environmental burdens and to minimize risks to human health. Food waste is indeed an untapped resource with great potential for energy production. Utilization of food waste for energy conversion currently represents a challenge due to various reasons. These include its inherent heterogeneously variable compositions, high moisture contents and low calorific value, which constitute an impediment for the development of robust, large scale, and efficient industrial processes. Although a considerable amount of research has been carried out on the conversion of food waste to renewable energy, there is a lack of comprehensive and systematic reviews of the published literature. The present review synthesizes the current knowledge available in the use of technologies for food-waste-to-energy conversion involving biological (e.g. anaerobic digestion and fermentation), thermal and thermochemical technologies (e.g. incineration, pyrolysis, gasification and hydrothermal oxidation). The competitive advantages of these technologies as well as the challenges associated with them are discussed. In addition, the future directions for more effective utilization of food waste for renewable energy generation are suggested from an interdisciplinary perspective. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. VRdose: an exposure dose evaluation system based on virtual reality technology - current status and future possibilities

    International Nuclear Information System (INIS)

    Iguchi, Yukihiro; Louka, Michael; Johnsen, Terje

    2004-01-01

    The Fugen Nuclear Power Station (NPS) was shut down permanently in March 2003, and preparatory activities are underway to decommission the Fugen NPS. It is necessary to accomplish the decommissioning economically and rationally by optimizing the workload, exposure dose and waste mass. This is important at the planning stage of the decommissioning. Virtual reality (VR) technology may prove beneficial to this process with regard to minimizing the workers' radiation exposure as well as contributing towards achieving efficient use of manpower. It could also be a valuable tool in the actual dismantling phase. In addition to this, VR provides an effective medium in presentations for public acceptance as well as for communication with relevant engineers. The VRdose project conducted by Japan Nuclear Cycle Development Institute (JNC) and Halden Virtual Reality Centre is doing research and development of VR technology for use in the decommissioning process at the Fugen NPS. This is technically an extensive project, touching on many of the present challenges in the VR area such as visual simulation and animation, interaction with objects in a virtual environment and scenario generation and optimisation. This paper describes the present status and future of the system. (Author)

  7. A review on the current status and production technology of {sup 32,} {sup 33}P-orthophosphoric acid

    Energy Technology Data Exchange (ETDEWEB)

    Park, Ul Jae; Han, Hyun Soo; Cho, Woon Kap; Kuznetsov, Rostislav A

    2000-10-01

    The current status of {sup 32}, {sup 33}P-Orthophosphoric acid production technology is reviewed. The following aspects of the technology are covered: - production of phosphorus-32 and phosphorus-33 using various nuclear reactions; - chemical properties of sulfur and phosphorus effecting the technology of radioactive phosphorus production; - chemical state of {sup 32}, {sup 33}P in neutron irradiated sulfur; - the technology of radioactive phosphorus isolation from neutron irradiated target and orthophosphoric acid production; - purification of {sup 32}, {sup 33}P-orthophosphoric acid from impurities and some related problems, like the nature of impurities, the storage of the final product, etc. - the quality control procedures of carrier-free ({sup 32}, {sup 33}P)-orthophosphoric acid preparations.

  8. Current status and perceived needs of information technology in Critical Access Hospitals: a survey study

    Directory of Open Access Journals (Sweden)

    George Demiris

    2007-01-01

    Full Text Available The US Congress established the designation of Critical Access Hospitals in 1997, recognising rural hospitals as vital links to health for rural and underserved populations. The intent of the reimbursement system is to improve financial performance, thereby reducing hospital closures. Informatics applications are thought to be tools that can enable the sustainability of such facilities. The aim of this study is to identify the current use of information and communication technology in Critical Access Hospitals, and to assess their readiness and receptiveness for the use of new software and hardware applications and their perceived information technology (IT needs. A survey was mailed to the administrators of all Critical Access Hospitals in one US state (Missouri and a reminder was mailed a few weeks later. Twenty-seven out of 33 surveys were filled out and returned (response rate 82%. While most respondents (66.7% stated that their employees have been somewhat comfortable in using new technology, almost 15% stated that their employees have been somewhat uncomfortable. Similarly, almost 12% of the respondents stated that they themselves felt somewhat uncomfortable introducing new technology. While all facilities have computers, only half of them have a specific IT plan. Findings indicate that Critical Access Hospitals are often struggling with lack of resources and specific applications that address their needs. However, it is widely recognised that IT plays an essential role in the sustainability of their organisations. The study demonstrates that IT applications have to be customised to address the needs and infrastructure of the rural settings in order to be accepted and properly utilised.

  9. The development and current status of the technology of isotope and radiation in China

    Energy Technology Data Exchange (ETDEWEB)

    Luo Zhifu [Dept. of Isotope, China Inst. of Atomic Energy, Beijing, BJ (China)

    1998-10-01

    The research and application of the technology of isotopes and radiation have been reviewed. Since the setup of the China`s first nuclear reactor at China Institute of Nuclear Energy in 1958, the technology of isotopes and radiation has been developed significantly. A research and application system has formed a considerable state. The technology of isotopes and radiation has been taken into the fields of industry, agriculture, medicine, and scientific research. The main achievements are on radiopharmaceuticals, radiation source, radiation process, and radioactive tracers. (author)

  10. Current status of education and training in nuclear technology in Bangladesh

    International Nuclear Information System (INIS)

    Ahmed, F.U.

    2007-01-01

    Bangladesh Atomic Energy Commission (BAEC) is the national authority for the introduction, promotion and safety issues of nuclear science and technology in the country. During the last four decades, a significant development has been achieved in the field of food and agriculture, medicine, industries and environment using nuclear technology. Education and training in science and technology played a vital role to achieve the significant development in these fields. Some local public universities and BAEC training facilities at home and abroad have played mainly a key role to develop the human resource in the field of nuclear science and technology. Over the last four decades, BAEC with its various specialized establishments has played a focused role in the advancement, understanding and usage of nuclear science and technologies in the country. Through years of cumulative efforts, BAEC has developed a pool of research infrastructure, capacity and human resources having been trained extensively at home and abroad in their respective fields. The trained manpower in the different fields of science and technology are working in the country to solve some national problems like arsenic contamination in drinking water, iodine deficiency disease goitre, cancer and many others. BAEC is going to establish a Nuclear Training Institute which will also have residential facilities. Government has already assured to fund to establish the Nuclear Training Centre in the campus of AERE, Savar. BAEC placed a formal proposal for Affiliation with Jahangirnagar University for Awarding Post Graduate Degrees in different specialized fields of nuclear science and technology. As this might take some time for implementation; therefore, BAEC has decided to start the academic program immediately under the present set-up of the organization. With this view, BAEC proposes to affiliate its Nuclear Training Institute with the Jahangirnagar University for pursuing academic degree programmes i.e. post

  11. Current status of the radiation technology and quality control for radiation processing in Latin America

    International Nuclear Information System (INIS)

    Miranda, Enrique Francisco Prietro

    2013-01-01

    The use of the radiation technology has gained acceptance in various regions of the world, where studies estimated that the installed capacity increases at a rate of 6 % per year and Latin America is part of this increase, due the advantages of this process when it is employed for the food preservation, sterilization of medical pharmaceutical material and to control the insect pests. This paper shows the art state of the application of Radiation Technology in Latin America, as well as the technological characteristics of the most gamma irradiation facilities and minor number the electron beam accelerator facilities, the types of irradiated products, state of the Quality Management System and the Dosimetric Systems used in the Radiation Processing Control in the Region. (author)

  12. Research on Technology and Teacher Education: Current Status and Future Directions.

    Science.gov (United States)

    Willis, Jerry; Thompson, Ann; Sadera, William

    1999-01-01

    Discusses the emergence of information technology in teacher education (ITTE) as a discipline; describes paradigms for research and development work, including empiricism, critical theory, and interpretivism; examines literature reviews, policy issues, diffusion of innovation, and component studies; and considers future possibilities. (Contains 89…

  13. Current status and trends of cooperation on radiotracer and NCS technologies

    International Nuclear Information System (INIS)

    Thereska, J.

    1997-01-01

    Relevant target areas for radiotracer and neutronic control system (NCS) applications are defined. The petroleum and petrochemical industries, mineral processing and waste-water treatment sectors are identified as the most appropriate beneficiaries. The new CRP on 'Radiotracer technology for engineering unit operations studies and unit process optimisation' aims to improve the radiotracer methodology, including new radiotracers, development of expert systems, new software for data processing with finite element techniques for flow structure visualisation, as well as to formulate guidelines for problem solving of complex processes. The organisation of a CRP on 'Multibeam radiogauging for multi-phase systems studies' to further develop and refine nucleonic gauge methodology and technology, including development of expert systems for optimal design and calibration, quality control according to ISO standards, emerging new applications, and formulation of guidelines and software for on line measurement of multi-phase system parameters of complex processes will be discussed in the near future

  14. Technologies for Arsenic Removal from Water: Current Status and Future Perspectives

    Directory of Open Access Journals (Sweden)

    Nina Ricci Nicomel

    2015-12-01

    Full Text Available This review paper presents an overview of the available technologies used nowadays for the removal of arsenic species from water. Conventionally applied techniques to remove arsenic species include oxidation, coagulation-flocculation, and membrane techniques. Besides, progress has recently been made on the utility of various nanoparticles for the remediation of contaminated water. A critical analysis of the most widely investigated nanoparticles is presented and promising future research on novel porous materials, such as metal organic frameworks, is suggested.

  15. Current status of design technology on core thermal-hydraulic performance in FLWR

    International Nuclear Information System (INIS)

    Ohnuki, Akira; Kobayashi, Noboru

    2008-01-01

    R and D project to investigate thermal-hydraulic performance in tight-lattice rod bundles for Innovative Water Reactor for Flexible Fuel Cycle (FLWR) has been progressed at Japan Atomic Energy Agency in collaboration with power utilities, reactor vendors and universities. The FLWR adopts a triangular tight-lattice rod bundle with around 1mm gap width between rods and the thermal-hydraulic performance is being recognized as one of the major subjects. We have performed the R and D using large-scale test facility (37-rod bundle with full-height and full-pressure), model experiments and advanced numerical simulation technology. This paper described the master plan for the development of design technology and showed an executive summary for this project. The thermal-hydraulic characteristics in the tight-lattice configuration were investigated and the feasibility was confirmed based on the experiments. We have developed the design technology including subchannel and 3-D numerical simulation one to evaluate the effects of geometry/scale on the thermal-hydraulic behaviors. (author)

  16. Myrrha, Technology Development for the Realisation of ADS in Eu:. Current Status & Prospects for Realisation

    Science.gov (United States)

    Fernandez, R.; Abderrahim, H. Aït; Baeten, P.; de Bruyn, D.; Maes, D.; Mazouzi, A. Al; Ariën, B.; Malambu, E.; Schuurmans, P.; Schyns, M.; Sobolev, V.; van den Eynde, G.; Vandeplassche, D.

    2010-06-01

    The coupling between an accelerator, a spallation target and a subcritical core has been studied for the first time at SCK•CEN in collaboration with Ion Beam Applications (IBA, Louvain-la-Neuve) in the frame of the ADONIS project (1995-1997). ADONIS was a small irradiation facility, based on the ADS concept, having a dedicated objective to produce radioisotopes for medical purposes and more particularly 99Mo as a fission product from highly enriched 235U (HEU) fissile targets. The ad-hoc scientific advisory committee recommended extending the purpose of the ADONIS machine to become a Material Testing Reactor (MTR) for material and fuel research, to study the feasibility of transmutation of the minor actinides and to demonstrate at a reasonable power scale the principle of the ADS. The project, since 1998 named MYRRHA, has then evolved to a larger installation. MYRRHA is now conceived as a flexible irradiation facility, able to work as an Accelerator Driven (subcritical mode) and in critical mode. In this way, MYRRHA will allow fuel developments for innovative reactor systems, material developments for GEN IV systems, material developments for fusion reactors, radioisotope production for medical and industrial applications and industrial applications, such as Si-doping. MYRRHA will also demonstrate the ADS full concept by coupling the three components (accelerator, spallation target and subcritical reactor) at reasonable power level to allow operation feedback, scalable to an industrial demonstrator and allow the study of efficient transmutation of high-level nuclear waste. Since MYRRHA is based on the heavy liquid metal technology, the eutectic lead-bismuth, it will be able to significantly contribute to the development of Lead Fast Reactor Technology. Since MYRRHA will also be operated in critical mode, MYRRHA can even better play the role of European Technology Pilot Plant in the roadmap for LFR.

  17. Current status and manufacturing technologies of magnesium alloy parts in Japanese home electronics

    Energy Technology Data Exchange (ETDEWEB)

    Nishikawa, Y.; Takara, A. [Corporate Production Engineering Div., Matsushita Electric Industrial Co., Ltd., Osaka (Japan)

    2003-07-01

    The Japanese home electronics market has demanded that the newer products must be smaller, thinner and lighter. The use of magnesium alloys for Japanese home electronics has increased since the latter half of the 1990's. Magnesium alloys have been used mainly for the outer cases of portable electric products, because of their lightness and rigidness. Magnesium is also a promising material from the viewpoint of recycling. Magnesium alloy parts have been mass-produced for the outer cases of portable home electronics, such as, mini-disc player, notebook type personal computer or cell phone. The parts have the characteristics of high quality in appearance and thin walled, complicated shape with rib or boss. Most of them are formed by die-casting or injection molding technologies. After casting, the parts are treated precise machining to clear minute surface cracks or voids. Subsequently, they are operated anti-corrosion treatment and spray coating. Recycling have already carried out for magnesium alloy scraps to be cast again. Paint stripping before remelting is performed by alkali solutions or sandblast techniques for coated scraps. Finally, the development of promising press forming technologies is also introduced. (orig.)

  18. The development and current status of the technology of isotope and radiation in China

    International Nuclear Information System (INIS)

    Jinrong, Z.

    1997-01-01

    The research and applications of isotope technology and radiation sources in China are presented. Many effort were directed towards production of radiopharmaceuticals, radiation sources, radiation treatment and radioactive tracers. Reactor and accelerator produced radioisotopes contributed to and will further accelerate the development of nuclear medicine in China. Recently, much attention has been paid on tumor therapy mainly with radiolabelled monoclonal antibody, radiolabelled microsphere and colloid, bone-seeking agents, and radiolabelled Octreotide. Radioimmunoassay has been widely used with many convenient kits available. There are above 30 radioimmunoassay kit produces and more than 60 radioimmunoassay centers. Recently the advance is mainly in solid-phase separation process and in radioimmunoassay method, including some nonradioactive immunoassay methods, such as enzyme immunoassay, fluorescence immunoassay, and chemiluminescence immunoassay. Kits for enzyme immunoassay have been put into clinical use. Various radiation sources are produced for medical purposes and for use in nuclear power stations

  19. Current Status of World Nuclear Fuel Cycle Technology (I): Canada and Latin America

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Hang Bok; Ko, Won Il

    2007-05-15

    Canada produces about one third of the world's uranium mine output, most of it from two new mines. After 2007 Canadian production is expected to increase further as more new mines come into production. About 15% of Canada's electricity comes from nuclear power, using indigenous technology, and 18 reactors provide over 12,500 MWe of power. Mexico has two nuclear reactors generating almost 5% of its electricity. Its first commercial nuclear power reactor began operating in 1989. There is some government support for expanding nuclear energy to reduce reliance on natural gas. Argentina has two nuclear reactors generating nearly one tenth of its electricity. Its first commercial nuclear power reactor began operating in 1974. Brazil has two nuclear reactors generating 4% of its electricity. Its first commercial nuclear power reactor began operating in 1982.

  20. Sensing Technologies for Precision Phenotyping in Vegetable Crops: Current Status and Future Challenges

    Directory of Open Access Journals (Sweden)

    Pasquale Tripodi

    2018-04-01

    Full Text Available Increasing the ability to investigate plant functions and structure through non-invasive methods with high accuracy has become a major target in plant breeding and precision agriculture. Emerging approaches in plant phenotyping play a key role in unraveling quantitative traits responsible for growth, production, quality, and resistance to various stresses. Beyond fully automatic phenotyping systems, several promising technologies can help accurately characterize a wide range of plant traits at affordable costs and with high-throughput. In this review, we revisit the principles of proximal and remote sensing, describing the application of non-invasive devices for precision phenotyping applied to the protected horticulture. Potentiality and constraints of big data management and integration with “omics” disciplines will also be discussed.

  1. PANIC: current status

    Science.gov (United States)

    Cárdenas, M. C.; Rodríguez Gómez, J.

    2011-11-01

    PANIC, the PAnoramic Near Infrared Camera, is a new instrument for Calar Alto Observatory (CAHA) is a wide-field infraredimager for the CAHA 2.2 m and 3.5 m telescopes. The optics is a folded single optical train, pure lens optics, with a pixel scale of 0.45 arcsec/pixel (18 microns) at the 2.2 m telescope and 0.23 arcsec/pixel at the 3.5 m. A mosaic of four Hawaii-2RG detectorsprovides a field of view (FOV) of 0.5x0.5 degrees and 0.25x0.25 degrees, respectively. It will cover the photometric bandsfrom Z to K_s (0.8 to 2.5 microns) with a low thermal background due to cold stops. Here we present the current status of the project.

  2. Separators used in microbial electrochemical technologies: Current status and future prospects.

    Science.gov (United States)

    Daud, Siti Mariam; Kim, Byung Hong; Ghasemi, Mostafa; Daud, Wan Ramli Wan

    2015-11-01

    Microbial electrochemical technologies (METs) are emerging green processes producing useful products from renewable sources without causing environmental pollution and treating wastes. The separator, an important part of METs that greatly affects the latter's performance, is commonly made of Nafion proton exchange membrane (PEM). However, many problems have been identified associated with the Nafion PEM such as high cost of membrane, significant oxygen and substrate crossovers, and transport of cations other than protons protons and biofouling. A variety of materials have been offered as alternative separators such as ion-exchange membranes, salt bridges, glass fibers, composite membranes and porous materials. It has been claimed that low cost porous materials perform better than PEM. These include J-cloth, nylon filter, glass fiber mat, non-woven cloth, earthen pot and ceramics that enable non-ion selective charge transfer. This paper provides an up-to-date review on porous separators and plots directions for future studies. Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. Background, current status, and prognosis of the ongoing slush hydrogen technology development program for the NASP

    Science.gov (United States)

    Dewitt, R. L.; Hardy, T. L.; Whalen, M. V.; Richter, G. P.; Tomsik, T. M.

    1990-01-01

    Among the Hydrogen Projects at the NASA Lewis Research Center (NASA LeRC), is the task of implementing and managing the Slush Hydrogen (SLH2) Technology Program for the United States' National AeroSpace Plane Joint Program Office (NASP JPO). The objectives of this NASA LeRC program are to provide verified numerical models of fluid production, storage, transfer, and feed systems and to provide verified design criteria for other engineered aspects of SLH2 systems germane to a NASP. The pursuit of these objectives is multidimensional, covers a range of problem areas, works these to different levels of depth, and takes advantage of the resources available in private industry, academia, and the U.S. Government. A summary of the NASA LeRC overall SLH2 program plan, is presented along with its implementation, the present level of effort in each of the program areas, some of the results already in hand, and the prognosis for the effort in the immediate future.

  4. Stem cell technology in breast cancer: current status and potential applications

    Directory of Open Access Journals (Sweden)

    Chiotaki R

    2016-04-01

    Full Text Available Rena Chiotaki, Hara Polioudaki, Panayiotis A Theodoropoulos Department of Biochemistry, School of Medicine, University of Crete, Heraklion, Greece Abstract: Breast cancer, the leading cause of cancer among females, is supported by the presence of a rare subset of undifferentiated cells within the tumor, identified as breast cancer stem cells (BCSCs. BCSCs underlie the mechanisms of tumor initiation and sustenance and are implicated in the dissemination of the primary tumor to metastatic sites, as they have been found circulating in the blood of breast cancer patients. The discovery of BCSCs has generated a great amount of interest among the scientific community toward their isolation, molecular characterization, and therapeutic targeting. In this review, after summarizing the literature on molecular characterization of BCSCs and methodologies used for their isolation, we will focus on recent data supporting their molecular and functional heterogeneity. Additionally, following a synopsis of the latest approaches for BCSC targeting, we will specifically emphasize on the therapeutic use of naïve or engineered normal stem cells in the treatment of breast cancer and present contradictory findings challenging their safety. Keywords: breast cancer stem cells, cancer stem cell heterogeneity, targeting cancer stem cells, circulating tumor cells, stem cell technology

  5. Review of supercritical CO2 power cycle technology and current status of research and development

    Directory of Open Access Journals (Sweden)

    Yoonhan Ahn

    2015-10-01

    Full Text Available The supercritical CO2 (S-CO2 Brayton cycle has recently been gaining a lot of attention for application to next generation nuclear reactors. The advantages of the S-CO2 cycle are high efficiency in the mild turbine inlet temperature region and a small physical footprint with a simple layout, compact turbomachinery, and heat exchangers. Several heat sources including nuclear, fossil fuel, waste heat, and renewable heat sources such as solar thermal or fuel cells are potential application areas of the S-CO2 cycle. In this paper, the current development progress of the S-CO2 cycle is introduced. Moreover, a quick comparison of various S-CO2 layouts is presented in terms of cycle performance.

  6. Stem cell technology for tendon regeneration: current status, challenges, and future research directions

    Directory of Open Access Journals (Sweden)

    Lui PP

    2015-12-01

    Full Text Available Pauline Po Yee Lui Headquarter, Hospital Authority, Hong Kong SAR, People's Republic of China Abstract: Tendon injuries are a common cause of physical disability. They present a clinical challenge to orthopedic surgeons because injured tendons respond poorly to current treatments without tissue regeneration and the time required for rehabilitation is long. New treatment options are required. Stem cell-based therapies offer great potential to promote tendon regeneration due to their high proliferative, synthetic, and immunomodulatory activities as well as their potential to differentiate to the target cell types and undergo genetic modification. In this review, I first recapped the challenges of tendon repair by reviewing the anatomy of tendon. Next, I discussed the advantages and limitations of using different types of stem cells compared to terminally differentiated cells for tendon tissue engineering. The safety and efficacy of application of stem cells and their modified counterparts for tendon tissue engineering were then summarized after a systematic literature search in PubMed. The challenges and future research directions to enhance, optimize, and standardize stem cell-based therapies for augmenting tendon repair were then discussed. Keywords: stem cells, tendon repair, tendon tissue engineering, tendon injuries

  7. Stem cell technology for bone regeneration: current status and potential applications

    Directory of Open Access Journals (Sweden)

    Asatrian G

    2015-02-01

    Full Text Available Greg Asatrian,1 Dalton Pham,1,2 Winters R Hardy,3 Aaron W James,1–3 Bruno Peault3,4 1Dental and Craniofacial Research Institute and Section of Orthodontics, School of Dentistry, 2Department of Pathology and Laboratory Medicine, David Geffen School of Medicine, 3UCLA/Orthopaedic Hospital Department of Orthopaedic Surgery and the Orthopaedic Hospital Research Center, Los Angeles, CA, USA; 4Medical Research Council Centre for Regenerative Medicine, Edinburgh, Scotland, UK Abstract: Continued improvements in the understanding and application of mesenchymal stem cells (MSC have revolutionized tissue engineering. This is particularly true within the field of skeletal regenerative medicine. However, much remains unknown regarding the native origins of MSC, the relative advantages of different MSC populations for bone regeneration, and even the biologic safety of such unpurified, grossly characterized cells. This review will first summarize the initial discovery of MSC, as well as the current and future applications of MSC in bone tissue engineering. Next, the relative advantages and disadvantages of MSC isolated from distinct tissue origins are debated, including the MSC from adipose, bone marrow, and dental pulp, among others. The perivascular origin of MSC is next discussed. Finally, we briefly comment on pluripotent stem cell populations and their possible application in bone tissue engineering. While continually expanding, the field of MSC-based bone tissue engineering and regeneration shows potential to become a clinical reality in the not-so-distant future.Keywords: mesenchymal stem cell, pericyte, bone tissue engineering, MSC, ASC, DMSC

  8. Toward Production From Gas Hydrates: Current Status, Assessment of Resources, and Simulation-Based Evaluationof Technology and Potential

    Energy Technology Data Exchange (ETDEWEB)

    Reagan, Matthew; Moridis, George J.; Collett, Timothy; Boswell, Ray; Kurihara, M.; Reagan, Matthew T.; Koh, Carolyn; Sloan, E. Dendy

    2008-02-12

    Gas hydrates are a vast energy resource with global distribution in the permafrost and in the oceans. Even if conservative estimates are considered and only a small fraction is recoverable, the sheer size of the resource is so large that it demands evaluation as a potential energy source. In this review paper, we discuss the distribution of natural gas hydrate accumulations, the status of the primary international R&D programs, and the remaining science and technological challenges facing commercialization of production. After a brief examination of gas hydrate accumulations that are well characterized and appear to be models for future development and gas production, we analyze the role of numerical simulation in the assessment of the hydrate production potential, identify the data needs for reliable predictions, evaluate the status of knowledge with regard to these needs, discuss knowledge gaps and their impact, and reach the conclusion that the numerical simulation capabilities are quite advanced and that the related gaps are either not significant or are being addressed. We review the current body of literature relevant to potential productivity from different types of gas hydrate deposits, and determine that there are consistent indications of a large production potential at high rates over long periods from a wide variety of hydrate deposits. Finally, we identify (a) features, conditions, geology and techniques that are desirable in potential production targets, (b) methods to maximize production, and (c) some of the conditions and characteristics that render certain gas hydrate deposits undesirable for production.

  9. A review on the current status and production technology for {sup 188}W-{sup 188}Re generator system

    Energy Technology Data Exchange (ETDEWEB)

    Kuznetsov, R. A.; Han, H. S.; Cho, W. K.; Park, U. J.; Kim, Y. M

    1998-11-01

    The current status of {sup 188}W-{sup 188}Re generator production technology were reviewed in PART 1. Main interests were given to the aspects of {sup 188}W reactor production, irradiated targets reprocessing and generator loading technologies, such as alumina type and gel type generators. In order to develop the more convenient and advanced {sup 188}W-{sup 188}Re generator, further studies must be carried out to get the precise evaluation of production and burn-up cross section of {sup 188}W, the more easily realizable generator loading procedure, and also to optimize the column and generator design to compensate the deterioration of generator performance because of parent radionuclide decay. By irradiation of {sup 186}W enriched sample, {sup 188}W-{sup 188}Re generator production experiments were performed to evaluate the possibility of {sup 188}W-{sup 188}Re generator production using HANARO, and PART 2 describes about the experiments. The experimental results shows the possibility of practical {sup 188}W-{sup 188}Re generator production using of low-specific activity {sup 188}W produced in HANARO. (author). 79 refs., 4 tabs., 26 figs.

  10. Current status of alloimmunity.

    Science.gov (United States)

    Borges, Thiago J; Murakami, Naoka; Riella, Leonardo V

    2016-11-01

    The present review aims to highlight the major recent advances in transplantation with regards to basic, translational, and clinical research. We describe new concepts in understanding allorecognition and allospecificity of T cells, and discuss current challenges in targeting memory T cells, including the limitation of rodent disease models. From a clinical perspective, we highlight the advances in molecular biopsy characterization, which have expanded our knowledge of potential drivers of injury and may provide better parameters for patient risk stratification. We also highlight the dual role of innate immunity in both stimulating and regulating adaptive immunity, as well as novel insights into environmental exposures that may affect immune regulation, such as high-salt diet. Finally, we discuss advances in understanding humoral response and novel technologies, such as chimeric antigen receptors-engineered T cells, microparticle-based drug delivery, and clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR associated protein 9 (Cas9) gene editing, that may provide intriguing and promising approaches to restrain alloimmunity. Current advances in our understanding of the basic mechanisms of alloimmunity and their potential translation to clinical applications will permit the development of novel diagnostic and therapeutic strategies to improve long-term graft survival.

  11. Status of fusion technology

    International Nuclear Information System (INIS)

    Mohan, Ashok

    1978-01-01

    The current status of fusion technology is surveyed. Limited reserves of fossil fuel and dangers of proliferation from nuclear reactors have brought into focus the need to develop an optional energy source. Fusion is being looked upon as an optional energy source which is free from environmental hazards unlike fossil fuels and nuclear reactors. Investments in R and D of fusion energy have increased rapidly in USA, Japan, USSR and European countries. Out of the various fusion fuels known, a mixture of D and T is widely chosen. The main problem in fusion technology is the confinement of plasma for a time sufficient to start the fusion reaction. This can be done magnetically or inertially. The three approaches to magnetic confinement are : (1) tokamak, (2) mirror and (3) pinch. Inertial confinement makes use of lasers or electron beams or ion beams. Both the methods of confinement i.e. magnetic and inertial have problems which are identified and their nature is discussed. (M.G.B.)

  12. Sinoprobe Datacenter Development: Current Status

    Science.gov (United States)

    Guan, Y.; Dong, S.; Chen, Z.; Chen, G.; Cheng, M.

    2011-12-01

    The project of the Sinoprobe datacenter development is to build new IT infrastructures needed to store, visualize and manage all the data acquired by SinoProbe program.The SinoProbe data center is designed using service-oriented architecture (SOA) principles. More specifically, service component architecture (SCA) is used to implement sinoprobe data services. It also uses various advanced technologies such as Java/JEE for the platform, PostgresSQL/PostGIS for the data storage, ApacheDS for LDAP, CoachDB for the medadata storage, GeoServer for the GIS services, ExtJs and OpenLayer for the Ajax framework, and Apache Shiro for the security framework. Through the integration and development of various technologies used, the major services of the datacenter system are implemented including the security infrastructure services (user authentication and authorization), metadata services, data warehouse stores, data services, GIS services, and web portal. There are also visualization components including the development of a virtual globe to replace the currently used Google Earth. This poster presents the current status of the SinoProbe data center development, and the detailed discussion of the system.

  13. Biosimilar drugs: Current status.

    Science.gov (United States)

    Kumar, Rajiv; Singh, Jagjit

    2014-07-01

    Biologic products are being developed over the past three decades. The expiry of patent protection for many biological medicines has led to the development of biosimilars in UK or follow on biologics in USA. This article reviews the literature on biosimilar drugs that covers the therapeutic status and regulatory guidelines. Appraisal of published articles from peer reviewed journals for English language publications, search from PubMed, and guidelines from European Medicines Agency, US Food Drug Administration (FDA) and India were used to identify data for review. Literature suggest that biosimilars are similar biological products, i.e., comparable but not identical to the reference product, are not generic version of innovator product and do not ensure therapeutic equivalence. Biosimilars present more challenges than conventional generics and marketing approval is also more complicated. To improve access, US Congress passed the Biologics Price Competition and Innovation act 2009 and US FDA allowed "abbreviated pathway" for their approval. U.S law has defined new standards and terms and EMA scientific guidelines have also set detailed approval standards. India being one of the most preferred manufacturing destinations of biosimilars, there is a need for stringent safety and regulatory guidelines. The New India Guidelines "Draft Guidelines on Similar Biologics were announced in June 2012, by Department of Biotechnology at Boston bio and available online.

  14. MR colonography: current status

    International Nuclear Information System (INIS)

    Lauenstein, Thomas C.

    2006-01-01

    Magnetic resonance colonography (MRC) has gained access into clinical routine as a means for the assessment of the large bowel. There are widely accepted indications for MRC, especially in patients with incomplete conventional colonoscopy. Furthermore, virtual MRC is more and more propagated as a screening tool, with advantages especially inherent to the non-invasive character of this procedure and the lack of ionizing radiation exposition. Beyond a sufficiently high diagnostic accuracy, outstanding patient acceptance is a major advantage of MRC as a diagnostic modality. This review article describes indications, techniques and clinical outcome of current MRC approaches. Furthermore, the impact of fecal tagging concepts is discussed. (orig.)

  15. Current status of converter steelmaking

    Energy Technology Data Exchange (ETDEWEB)

    Oghbasialasie, H.; Holappa, L.

    1995-12-31

    This literature work is mainly focusing on the mechanisms of modern converter steelmaking and related with the evaluation of converter technology applied during the last decades and further to the future. The history of steelmaking has been briefly reviewed from bloomeries and early-steelmaking processes to the progress of modern converter process. The pneumatic converter processes were developed in the 1850`s and thereafter the basis for the rapid growth of steel industries was established for the next 100 years. The world production of steel has not continuously grown but fluctuating quite much. It reached 723 Mt in 1994. The production is believed to grow the forecast for the year 2003 being approximately 800 Mt. Electric arc furnace production is estimated to reach 280 Mt by 2003, and BOFIOH will reach 520 Mt by 2003. The current status of the converter steelmaking process is briefly described both on its theoretical bases and practical technological progresses. Developments which significantly improve the process are briefly discussed. Several more recent developments such as combined oxygen blowing process, increased scrap melting, post combustion and hot metal pretreatment are discussed. The future progress will be in further development of these process characteristics as well as in eventual emerging of the continuous converter process. (author)

  16. Current status of pulmonary metastasectomy

    DEFF Research Database (Denmark)

    Hornbech, Kåre; Ravn, Jesper; Steinbrüchel, Daniel Andreas

    2011-01-01

    for unresected patients. In this article, we discuss the current status on pulmonary metastasectomy. Preoperative assessment and selection of surgical candidates is covered. The different surgical strategies including surgical approach, unilateral versus bilateral exploration, lymph node dissection, and repeat...

  17. MRAM Technology Status

    Science.gov (United States)

    Heidecker, Jason

    2013-01-01

    Magnetoresistive Random Access Memory (MRAM) is much different from conventional types of memory like SRAM, DRAM, and Flash, where electric charge is used to store information. Instead of exploiting the charge of an electron, MRAM uses its spin to store data. This new type of electronics is known as "spintronics." The primary focus of this report is the current generation of MRAM technology, and its reliability, vendors, and space-readiness.

  18. Hollow fiber membrane based technology and pressure driven membrane processes in nuclear fuel cycle: current status and challenges

    International Nuclear Information System (INIS)

    Pabby, Anil K.

    2013-01-01

    and are used for analytical sample preparation, due to its advantages over conventional sample preparation techniques. This invited talk presents the overview of HF based and pressure driven technologies and their commercial applications in nuclear industries including current scenario of these techniques applied worldwide. Author also cover some of the results obtained in laboratory using 'concentration' and 'pressure driven' based membrane techniques for treating waste generated by radioactive plants. Attempts are made to focus future progresses in membrane engineering. (author)

  19. The WIMP Paradigm: Current Status

    International Nuclear Information System (INIS)

    Feng, Jonathan

    2011-01-01

    The WIMP paradigm is the glue that joins together much of the high energy and cosmic frontiers. It postulates that most of the matter in the Universe is made of weakly-interacting massive particles, with implications for a broad range of experiments and observations. I will review the WIMP paradigm's underlying motivations, its current status in view of rapid experimental progress on several fronts, and recent theoretical variations on the WIMP paradigm theme.

  20. Current Status of Testing for Microdeletion Syndromes and Rare Autosomal Trisomies Using Cell-Free DNA Technology.

    Science.gov (United States)

    Yaron, Yuval; Jani, Jacques; Schmid, Maximilian; Oepkes, Dick

    2015-11-01

    Noninvasive prenatal testing using cell-free DNA in maternal blood for trisomy 21 was introduced in 2011. This technology has continuously evolved with the addition of screening for trisomy 18 and trisomy 13 followed by the inclusion of sex chromosome aneuploidies. Expanded noninvasive prenatal test panels have recently become available, which enable screening for microdeletion syndromes such as the 22q11.2 deletion (associated with the velocardiofacial syndrome) and others. However, the performance data for these microdeletion syndromes are derived from a small number of samples, mostly generated in vitro. Rigorous performance evaluation, as was done at least for trisomy 21 testing using cell-free DNA analysis, is difficult to perform given the rarity of each condition. In addition, detection rates may vary considerably depending on deletion size. Importantly, positive predictive values (PPVs), strongly influenced by the low prevalence, are expected to be significantly lower than 10% for most conditions. Thus, screening in an average-risk population is likely to have many more false-positives than affected cases detected. Conversely, testing in a high-risk population such as fetuses with cardiac anomalies may have higher PPVs, but a negative result needs to be considered carefully as a result of uncertain information about detection rates and a significant residual risk for other copy number variants and single gene disorders. This article integrates current knowledge on cell-free DNA testing for microdeletions with the aim to assist clinicians and policymakers in designing optimal programs for screening in pregnancy.

  1. Status of thorium technology

    International Nuclear Information System (INIS)

    Garg, R.K.; Raghavan, R.V.; Karve, V.M.; Narayandas, G.R.

    1977-01-01

    Although a number of studies have been conducted in various countries to evolve reactor systems based on thorium fuel cycle, its use, so far, is limited to only a few reactors. However, for countries having large reserves of thorium, its utilization is of great significance for their nuclear power programmes. Reasonably assured world resources of thorium in the lower price range have been estimated at more than 500,000 tons of ThO 2 . While most of these resources are in placer deposits in various parts of the world, some vein deposits and uranium ores are other important sources of thorium. Monazite, the most important mineral of thorium, is found in the beach sand deposits along with other heavy minerals like ilmenite, rutile, zircon, and sillimanite etc. Mining of these deposits is usually carried out by suction dredging and separation of monazite from other minerals is effected by a combination of magnetic, electrostatic and gravity separation techniques. Chemical processing of monazite is carried out either by sulphuric acid or caustic treatment, followed by separation of the rare earths and thorium by partial precipitation or leaching. The thorium concentrate is further processed to obtain mantle grade thorium nitrate by chemical purification steps whereas solvent extraction using TBP is adopted for making nuclear-grade material. The purified thorium nitrate is converted to the oxide usually by precipitation as oxalate followed by calcination. The oxide is reduced directly with calcium or converted to the chloride or fluoride and then reduced by calcium or magnesium to obtain thorium metal. Various fuel designs based on the metal or its alloys, mixed oxides or carbides, and dispersed type fuel elements have been developed and accordingly, different fabrication techniques have been employed. Work on irradiation of thorium containing fuel elements and separation of U 233 is being carried out. This paper reviews the status of thorium technology in the world with

  2. TOPICAL REVIEW: Current status and issues in the surface passivation technology of mercury cadmium telluride infrared detectors

    Science.gov (United States)

    Agnihotri, O. P.; Musca, C. A.; Faraone, L.

    1998-08-01

    Surface passivation has been recognized as a crucial step in the fabrication of mercury cadmium telluride photoconductive as well as photovoltaic detectors. The subject has attracted considerable attention in the past and several reviews existed by 1991. The subject matter, however, received added impetus with the development of techniques like MOCVD and MBE and recently there has been considerable work on MCT passivation using in situ grown II-VI semiconductors. In this report, we have tried to give the present status and identify the issues particularly with reference to the recent work on the subject.

  3. The Current Status of Research on GNSS-R Remote Sensing Technology in China and Future Development

    Directory of Open Access Journals (Sweden)

    Li Huang

    2013-12-01

    Full Text Available Global Navigation Satellite System (GNSS, has a significant impact on all areas of human activity, not only can provide users with shared global navigation, position and timing information, but also can provide a L-band microwave signal source of long term stability and high temporal-spatial resolution. In recent years, development of the navigation satellite remote sensing applications using GNSS as a external illuminator, it has been forming a new Global Navigation Satellite System METeorology (GNSS/MET, of which Global Navigation Satellite System-Reflection (GNSS-R signals remote sensing technology is rising. It could be considered as a non-cooperative artificial illuminator, bistatic (multi-static radar system, and has the advantages of both passive and active remote sensing. Then it gets more and more people’s attention and favor, and broadening into Atmosphere -ocean and land surface remote sensing fields. However, the address of this technology is very messy at home and abroad, and not able to accurately express its special meaning. This article attempts to give a new term: Exogenous-Aided Remote Sensing (EARS for discussion.

  4. Fusion technology status and requirements

    International Nuclear Information System (INIS)

    Thomassen, K.I.

    1982-01-01

    This paper summarizes the status of fusion technology and discusses the requirements to be met in order to build a demonstration fusion plant. Strategies and programmatic considerations in pursuing engineering feasibility are also outlined

  5. Fossil energy waste management. Technology status report

    Energy Technology Data Exchange (ETDEWEB)

    Bossart, S.J.; Newman, D.A.

    1995-02-01

    This report describes the current status and recent accomplishments of the Fossil Energy Waste Management (FE WM) projects sponsored by the Morgantown Energy Technology Center (METC) of the US Department of Energy (DOE). The primary goal of the Waste Management Program is to identify and develop optimal strategies to manage solid by-products from advanced coal technologies for the purpose of ensuring the competitiveness of advanced coal technologies as a future energy source. The projects in the Fossil Energy Waste Management Program are divided into three types of activities: Waste Characterization, Disposal Technologies, and Utilization Technologies. This technology status report includes a discussion on barriers to increased use of coal by-products. Also, the major technical and nontechnical challenges currently being addressed by the FE WM program are discussed. A bibliography of 96 citations and a list of project contacts is included if the reader is interested in obtaining additional information about the FE WM program.

  6. Cancer Technology - Cancer Currents Blog

    Science.gov (United States)

    Blog posts on technologies that affect cancer research and care—including new technologies for detecting cancer, testing treatments, storing/analyzing data, and improving patient care—from NCI Cancer Currents.

  7. Current status of nuclear power

    International Nuclear Information System (INIS)

    Behnke, W.B.

    1984-01-01

    The decision to devote the 1984 conference to nuclear power is timely and appropriate. Illinois has a long, and distinguished history in the development of civilian nuclear power. The concept was born at the University of Chicago, developed at Argonne National Laboratory and demonstrated on the Commonwealth Edison system at our pioneer Dresden Nuclear Station. Today, Illinois ranks number one in the nation in nuclear generation. With over a quarter century of commercial operating experience, nuclear power has proven its worth and become a significant and growing component of electric power supply domestically and throughout the world. Despite its initial acceptance, however, the nuclear power industry in the U.S. is now in the midst of a difficult period of readjustment stemming largely from the economic and regulatory problems of the past decade. As a result, the costs of plants under construction have increased dramatically, causing serious financial difficulties for several projects and their owners. At the same time, the U.S. is facing hard choices concerning its future energy supplies. Conferences such as this have an important role in clarifying the issues and helping to find solutions to today's pressing energy problems. This paper summarizes the status of nuclear power both here and abroad, discussing the implications of current events in the context of national energy policy and economic development here in Illinois

  8. Robotic renal transplantation: Current status

    Directory of Open Access Journals (Sweden)

    Akshay Sood

    2015-01-01

    Full Text Available Introduction: Kidney transplantation (KT has traditionally been performed by open renal transplantation, but recently, a few groups including our own have described a minimally invasive approach to KT. We aim to discuss the current status of robotic kidney transplantation (RKT and describe our technique of RKT with regional hypothermia. Material and Methods: We used the search terms "minimally invasive" OR "robotic" OR "robot assisted" AND "kidney transplantation." Papers written in English and concerning technical and/or clinical outcomes following minimally invasive kidney transplantation were selected. Three hundred and eighteen unique articles were retrieved and nine were relevant. Comparative outcomes data following RKT with regional hypothermia versus open KT (OKT from our own group were also included. Findings: Nine papers, so far, have evaluated the role of robotic approach in KT and have conclusively established the feasibility, safety, and reproducibility of RKT, although these studies have been performed by experienced robotic surgeons/teams. The contemporary published series note that rejection rates were similar in RKT and OKT patients. Mean serum creatinine at 6 months in RKT and OKT patients was equivalent, across the three series. Most of the studies also note a dramatic reduction in the wound-related complication rates. Conclusion: RKT appears to be a safe surgical alternative to the standard open approach of KT. RKT is associated with reduced postoperative pain, analgesic requirement, and better cosmesis. RKT, although in its infancy, appears to be associated with lower complication rates.

  9. Current status of zirconia restoration.

    Science.gov (United States)

    Miyazaki, Takashi; Nakamura, Takashi; Matsumura, Hideo; Ban, Seiji; Kobayashi, Taira

    2013-10-01

    During the past decade, zirconia-based ceramics have been successfully introduced into the clinic to fabricate fixed dental prostheses (FDPs), along with a dental computer-aided/computer-aided manufacturing (CAD/CAM) system. In this article (1) development of dental ceramics, (2) the current status of dental CAD/CAM systems, (3) CAD/CAM and zirconia restoration, (4) bond between zirconia and veneering ceramics, (5) bond of zirconia with resin-based luting agents, (6) surface finish of zirconia restoration and antagonist enamel wear, and (7) clinical evaluation of zirconia restoration are reviewed. Yttria partially stabilized tetragonal zirconia polycrystalline (Y-TZP) showed better mechanical properties and superior resistance to fracture than other conventional dental ceramics. Furthermore, ceria-stabilized tetragonal zirconia polycrystalline and alumina nanocomposites (Ce-TZP/A) had the highest fracture toughness and had resistance to low-temperature aging degradation. Both zirconia-based ceramics have been clinically available as an alternative to the metal framework for fixed dental prostheses (FDPs). Marginal adaptation of zirconia-based FDPs is acceptable for clinical application. The most frequent clinical complication with zirconia-based FDPs was chipping of the veneering porcelain that was affected by many factors. The mechanism for the bonding between zirconia and veneering ceramics remains unknown. There was no clear evidence of chemical bonding and the bond strength between zirconia and porcelain was lower than that between metal and porcelain. There were two alternatives proposed that might avoid chipping of veneering porcelains. One was hybrid-structured FDPs comprising CAD/CAM-fabricated porcelain parts adhering to a CAD/CAM fabricated zirconia framework. Another option was full-contour zirconia FDPs using high translucent zirconia. Combined application of silica coating and/or silane coupler, and 10-methacryloyloxydecyl dihydrogen phosphate is

  10. Technological status of organic photovoltaics (OPV)

    DEFF Research Database (Denmark)

    Carlé, Jon Eggert; Krebs, Frederik C

    2013-01-01

    This paper gives a technological status of organic and polymer photovoltaics (OPV) for both single and tandem junctions. We list the current state-of-the-art at the laboratory level for very small rigid and mostly vacuum processed devices to larger area flexible and printed devices. In comparison...

  11. rasdaman Array Database: current status

    Science.gov (United States)

    Merticariu, George; Toader, Alexandru

    2015-04-01

    rasdaman (Raster Data Manager) is a Free Open Source Array Database Management System which provides functionality for storing and processing massive amounts of raster data in the form of multidimensional arrays. The user can access, process and delete the data using SQL. The key features of rasdaman are: flexibility (datasets of any dimensionality can be processed with the help of SQL queries), scalability (rasdaman's distributed architecture enables it to seamlessly run on cloud infrastructures while offering an increase in performance with the increase of computation resources), performance (real-time access, processing, mixing and filtering of arrays of any dimensionality) and reliability (legacy communication protocol replaced with a new one based on cutting edge technology - Google Protocol Buffers and ZeroMQ). Among the data with which the system works, we can count 1D time series, 2D remote sensing imagery, 3D image time series, 3D geophysical data, and 4D atmospheric and climate data. Most of these representations cannot be stored only in the form of raw arrays, as the location information of the contents is also important for having a correct geoposition on Earth. This is defined by ISO 19123 as coverage data. rasdaman provides coverage data support through the Petascope service. Extensions were added on top of rasdaman in order to provide support for the Geoscience community. The following OGC standards are currently supported: Web Map Service (WMS), Web Coverage Service (WCS), and Web Coverage Processing Service (WCPS). The Web Map Service is an extension which provides zoom and pan navigation over images provided by a map server. Starting with version 9.1, rasdaman supports WMS version 1.3. The Web Coverage Service provides capabilities for downloading multi-dimensional coverage data. Support is also provided for several extensions of this service: Subsetting Extension, Scaling Extension, and, starting with version 9.1, Transaction Extension, which

  12. Stemless shoulder arthroplasty: current status.

    Science.gov (United States)

    Churchill, R Sean

    2014-09-01

    Since the original Neer humeral replacement in the 1950s, the standard primary anatomic total shoulder arthroplasty design has slowly evolved. Most recently, the humeral stem has become progressively shorter to help combat stem-related complications. Currently, there are several companies who have developed and marketed a stemless humeral arthroplasty component. Manufacturers' data for 5 stemless shoulder arthroplasty components currently on the market were analyzed and reviewed. A literature review of short-term results for stemless shoulder arthroplasty was completed. Of the stemless shoulder arthroplasty systems available on the market, 3 are currently undergoing clinical trials in the United States. The Tornier Simpliciti (Tornier, Edina, MN, USA) clinical trial began in 2011. The study with 2-year minimum follow-up results is scheduled for completion in November 2014. The Arthrex Eclipse (Arthrex, Naples, FL, USA) clinical trial was started in January 2013. The tentative study completion date is 2017. The Biomet Nano (Biomet, Warsaw, IN, USA) clinical trial began in October 2013 and also has a tentative completion date of 2017. No other clinical trial is currently under way in the United States. Early results for stemless shoulder arthroplasty indicate clinical results similar to standard stemmed shoulder arthroplasty. Radiographic analysis indicates implant stability without migration or subsidence at 2- to 3-year minimum follow-up.. Several stemless shoulder arthroplasty implants are available outside the United States. Early clinical and radiographic results are promising, but well-designed clinical studies and midterm results are lacking. Three clinical trials are currently under way in the United States with initial availability for use anticipated in 2015. Copyright © 2014 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

  13. Current status of lupus nephritis

    Science.gov (United States)

    Jaryal, Ajay; Vikrant, Sanjay

    2017-01-01

    Systemic lupus erythematosus (SLE) is a systemic disease of unknown aetiology with variable course and prognosis. Lupus nephritis (LN) is one of the important disease manifestations of SLE with considerable influence on patient outcomes. Immunosuppression therapy has made it possible to control the disease with improved life expectancy and quality of life. In the last few decades, various studies across the globe have clarified the role, dose and duration of immunosuppression currently in use and also provided evidence for new agents such as mycophenolate mofetil, calcineurin inhibitors and rituximab. However, there is still a need to develop new and specific therapy with less adverse effects. In this review, the current evidence of the treatment of LN and its evolution, and new classification criteria for SLE have been discussed. Also, rationale for low-dose intravenous cyclophosphamide as induction agent followed by azathioprine as maintenance agent has been provided with emphasis on individualized and holistic approach. PMID:28639592

  14. Current status of lupus nephritis

    OpenAIRE

    Jaryal, Ajay; Vikrant, Sanjay

    2017-01-01

    Systemic lupus erythematosus (SLE) is a systemic disease of unknown aetiology with variable course and prognosis. Lupus nephritis (LN) is one of the important disease manifestations of SLE with considerable influence on patient outcomes. Immunosuppression therapy has made it possible to control the disease with improved life expectancy and quality of life. In the last few decades, various studies across the globe have clarified the role, dose and duration of immunosuppression currently in use...

  15. Current Status of RENO Experiment

    International Nuclear Information System (INIS)

    Kim, Soo-Bong

    2010-01-01

    The RENO (Reactor Experiment for Neutrino Oscillation) is under construction to measure the value of the smallest and unknown neutrino mixing angle θ 13 . The experiment will compare the measured fluxes of electron antineutrinos at two detectors located at 290 m and 1.4 km distances from the center of the Yonggwang nuclear reactors in Korea, with world-second largest thermal power output of 16.4 GW. Construction of experimental halls and access tunnels for both near and far detector sites was completed in early 2009. The detectors are near completion, and data-taking is planned to start in mid 2010. An expected number of observed antineutrino is roughly 510 and 80 per day in the near detector and far detector, respectively. An estimated systematic uncertainty associated with the measurement is less than 0.6%, and an expected statistical error is about 0.3%. With three years of data, the experiment will search for the mixing angle values of sin 2 (2θ 13 ) down to 0.02 in 90% C.L. limit. In this talk, the construction status will be presented. (author)

  16. Gravitational wave astronomy: the current status

    Science.gov (United States)

    Blair, David; Ju, Li; Zhao, ChunNong; Wen, LinQing; Chu, Qi; Fang, Qi; Cai, RongGen; Gao, JiangRui; Lin, XueChun; Liu, Dong; Wu, Ling-An; Zhu, ZongHong; Reitze, David H.; Arai, Koji; Zhang, Fan; Flaminio, Raffaele; Zhu, XingJiang; Hobbs, George; Manchester, Richard N.; Shannon, Ryan M.; Baccigalupi, Carlo; Gao, Wei; Xu, Peng; Bian, Xing; Cao, ZhouJian; Chang, ZiJing; Dong, Peng; Gong, XueFei; Huang, ShuangLin; Ju, Peng; Luo, ZiRen; Qiang, Li'E.; Tang, WenLin; Wan, XiaoYun; Wang, Yue; Xu, ShengNian; Zang, YunLong; Zhang, HaiPeng; Lau, Yun-Kau; Ni, Wei-Tou

    2015-12-01

    In the centenary year of Einstein's General Theory of Relativity, this paper reviews the current status of gravitational wave astronomy across a spectrum which stretches from attohertz to kilohertz frequencies. Sect. 1 of this paper reviews the historical development of gravitational wave astronomy from Einstein's first prediction to our current understanding the spectrum. It is shown that detection of signals in the audio frequency spectrum can be expected very soon, and that a north-south pair of next generation detectors would provide large scientific benefits. Sect. 2 reviews the theory of gravitational waves and the principles of detection using laser interferometry. The state of the art Advanced LIGO detectors are then described. These detectors have a high chance of detecting the first events in the near future. Sect. 3 reviews the KAGRA detector currently under development in Japan, which will be the first laser interferometer detector to use cryogenic test masses. Sect. 4 of this paper reviews gravitational wave detection in the nanohertz frequency band using the technique of pulsar timing. Sect. 5 reviews the status of gravitational wave detection in the attohertz frequency band, detectable in the polarisation of the cosmic microwave background, and discusses the prospects for detection of primordial waves from the big bang. The techniques described in sects. 1-5 have already placed significant limits on the strength of gravitational wave sources. Sects. 6 and 7 review ambitious plans for future space based gravitational wave detectors in the millihertz frequency band. Sect. 6 presents a roadmap for development of space based gravitational wave detectors by China while sect. 7 discusses a key enabling technology for space interferometry known as time delay interferometry.

  17. Current Status of SPINNORs Designs

    Science.gov (United States)

    Su'ud, Zaki

    2010-06-01

    This study discuss about the SPINNOR (Small Power Reactor, Indonesia, No On-site Refuelling) and the VSPINNOR (Very Small Power Reactor, Indonesia, No On-site Refuelling) which are small lead-bismuth cooled nuclear power reactors with fast neutron spectrum that could be operated for more than 10 or 15 years without on-site refuelling. They are based on the concept of a long-life core reactor developed in Indonesia since early 1990 in collaboration with the Research Laboratory for Nuclear Reactors of the Tokyo Institute of Technology (RLNR TITech). The reactor cores are designed to have near zero (less then one effective delayed neutron fraction) burn-up reactivity swing during the whole course of their operation to avoid a possibility of prompt criticality accident. The basic concept is that central region of the reactor core is filled with fertile (blanket) material. During the reactor operation fissile material accumulates in this central region, which helps to compensate fissile material loss in the peripheral core region and also contributes to negative coolant loss reactivity effect. A concept of high fuel volume fraction in the core is applied to achieve smaller size of a critical reactor. In this paper we consider to add Np-237 to the fuel to enhance non proliferation characteristics of the systems. The effect of Np-237 amount variation is discussed.

  18. [Current status of aphasia therapy].

    Science.gov (United States)

    Lang, C; von Stockert, T R

    1986-04-01

    Aphasia therapy in adults has been established to a larger extent relatively lately in the history of aphasiology, i.e. after its social medical importance had been realized and one of the cardinal problems of neurology solved more satisfactorily--lesion localization by imaging techniques. In order to evaluate the efficiency of aphasia therapy--which is still not quite uncontradicted--it was necessary to acquire sufficient knowledge of the spontaneous recovery process. It takes place--e.g. after stroke--mainly during the first 3 months, coming, as a rule, to a halt during the first year. Longer recovery periods, however, have been described. Next to etiology neurological status, overall health condition, type and severity of aphasia, and time delay between onset of the disease and start of therapy have been ascertained, whereas age and handedness seem to be of minor relevance. If syndrome change occurs the boundary between Broca's and Wernicke's aphasia is not surpassed; this taken apart almost any change from a more severe to a milder form of aphasia is possible. To isolate the therapeutic effect from spontaneous recovery in larger groups is difficult. There are, however, more recent investigations which suggest, that a correctly indicated therapy, which is sufficiently intensive and lasts long enough, will be effective. One of the corner-stones of any therapeutic effort ist adequate stimulation, oriented toward the patients needs and his aphasic syndrome, and taking into account the systemic nature of language and its most important linguistic structural components. Furthermore, a phase-specific and interdisciplinary approach and integration of closely related persons play an important role. We divide the numerous therapeutic techniques into 3 groups: direct or stimulation approach, indirect or circumventory approach, compensatory or alternative strategies approach. Representatives of all 3 groups are presented briefly, e.g. auditory stimulation, divergent

  19. The current status of radiosurgery

    International Nuclear Information System (INIS)

    Mehta, Minesh P.

    1996-01-01

    Objectives: Review the role of radiosurgery in recurrent malignant gliomas for palliative purposes. Review the role of radiosurgery in newly diagnosed malignant glioma as boost therapy and emphasize the randomized clinical trials underway. Review the role of radiosurgery in the management of patients with brain metastases and emphasize the major prognostic factors. Review the recently initiated clinical trials for brain metastases using radiosurgery. Review the role of radiosurgery in the management of benign tumors with specific emphasis on meningioma and acoustic neuroma. Emphasize the rationale for fractionation and present the preliminary results of fractionated stereotactic radiation. Stereotactic localization techniques, originally designed for neurosurgery, have been used to delivery high single doses of radiation to small intracranial targets for more than 25 years, a technique referred to as stereotactic radiosurgery. Radiosurgery has proven to be an attractive alternative to surgery in the management of several benign tumors, such as vestibular schwannomas with better preservation of hearing and facial nerve function than microsurgical resection. For other benign tumors such as meningioma and pituitary adenoma, preliminary results are promising, but longer range studies to confirm high tumor control rates are necessary. For patients with malignant glioma, radiosurgery has been used to escalate the radiation dose to enhance tumor control following surgery and radiation therapy. The rationale for this is grounded in the recent confirmatory randomized prospective trial verifying the value of brachytherapy in this disease. The results of radiosurgery from single institutional experiences for primary and recurrent malignant glioma indicate a palliative benefit as well as a potential survival benefit in a select sub-group of patients based on the appropriate mix of prognostic criteria such as patient age, performance status, tumor size and extent of resection

  20. Engineered barriers: current status 1989

    International Nuclear Information System (INIS)

    Atkinson, A.; Marsh, G.B.

    1989-06-01

    This report summarises the current state of research relevant to assessing the performance of engineered barriers made of steel and concrete in radioactive waste repositories. The objective of these barriers is to contain substantially the radionuclides within them by providing both physical and chemical impediment to their release. The physical barriers are of most value for highly soluble isotopes with relatively short half-lives (eg 137 Cs), since they can provide a measure of containment until a large fraction of the activity has decayed. In addition they can facilitate retrievability for some period after disposal. The chemical barriers operate by beneficial conditioning of the near field groundwater and providing sites for sorption of radionuclides. Both of these reduce the aqueous concentration of radionuclides in the near field. (author)

  1. REACH and nanomaterials: current status

    International Nuclear Information System (INIS)

    Alessandrelli, Maria; Di Prospero Fanghella, Paola; Polci, Maria Letizia; Castelli, Stefano; Pettirossi, Flavio

    2015-01-01

    New challenges for regulators are emerging about a specific assessment and appropriate management of the potential risks of nanomaterials. In the framework of European legislation on chemicals, Regulation (EC) No. 1907/2006 REACH aims to ensure the safety of human health and the environment through the collection of information on the physico-chemical characteristics of the substances and on their profile (eco) toxicological and the identification of appropriate risk management linked to 'exposure to these substances without impeding scientific progress and the competitiveness of industry. In order to cover the current shortage of information on the safety of nanomaterials and tackle the acknowledged legal vacuum, are being a rich activities, carried out both by regulators both by stake holders, and discussions on the proposals for adapting the European regulatory framework for chemicals . The European Commission is geared to strengthen the REACH Regulation by means of updates of its annexes. The importance of responding to the regulatory requirements has highlighted the need for cooperation between European organizations, scientists and industries to promote and ensure the safe use of nanomaterials. [it

  2. Current status and prospects for Chernobyl Ukritiye

    International Nuclear Information System (INIS)

    Jampsin, B.

    1996-01-01

    Current status and prospects for Chernobyl Ukritiye (sarcophagus) are described, including the following issues: the accident; the sarcophagus; the radioactive inventory; the design basis criteria; the analysis of the present state; a way forward

  3. Current status, research needs, and opportunities in applications of surface processing to transportation and utilities technologies. Proceedings of a December 1991 workshop

    Energy Technology Data Exchange (ETDEWEB)

    Czanderna, A.W.; Landgrebe, A.R. [eds.

    1992-09-01

    Goal of surface processing is to develop innovative methods of surface modification and characterization for optimum performance and environmental protection for cost-effective operational lifetimes of systems, materials, and components used in transportation and utilities. These proceedings document the principal discussions and conclusions reached at the workshop; they document chapters about the current status of surface characterization with focus on composition, structure, bonding, and atomic-scale topography of surfaces. Also documented are chapters on the current status of surface modification techniques: electrochemical, plasma-aided, reactive and nonreactive physical vapor deposition, sol-gel coatings, high-energy ion implantation, ion-assisted deposition, organized molecular assemblies, solar energy. Brief chapters in the appendices document basic research in surface science by NSF, Air Force, and DOE. Participants at the workshop were invited to serve on 10 working groups. Separate abstracts were prepared for the data base where appropriate.

  4. Edible vaccines: Current status and future

    Directory of Open Access Journals (Sweden)

    Lal P

    2007-01-01

    Full Text Available Edible vaccines hold great promise as a cost-effective, easy-to-administer, easy-to-store, fail-safe and socioculturally readily acceptable vaccine delivery system, especially for the poor developing countries. It involves introduction of selected desired genes into plants and then inducing these altered plants to manufacture the encoded proteins. Introduced as a concept about a decade ago, it has become a reality today. A variety of delivery systems have been developed. Initially thought to be useful only for preventing infectious diseases, it has also found application in prevention of autoimmune diseases, birth control, cancer therapy, etc. Edible vaccines are currently being developed for a number of human and animal diseases. There is growing acceptance of transgenic crops in both industrial and developing countries. Resistance to genetically modified foods may affect the future of edible vaccines. They have passed the major hurdles in the path of an emerging vaccine technology. Various technical obstacles, regulatory and non-scientific challenges, though all seem surmountable, need to be overcome. This review attempts to discuss the current status and future of this new preventive modality.

  5. Current status of NPP generation IV

    International Nuclear Information System (INIS)

    Yohanes Dwi Anggoro; Dharu Dewi; Nurlaila; Arief Tris Yuliyanto

    2013-01-01

    Today development of nuclear technology has reached the stage of research and development of Generation IV nuclear power plants (advanced reactor systems) which is an innovative development from the previous generation of nuclear power plants. There are six types of power generation IV reactors, namely: Very High Temperature Reactor (VHTR), Sodium-cooled Fast Reactor (SFR), Gas-cooled Fast Reactor (GFR), Lead-cooled Fast Reactor (LFR), Molten Salt Reactor (MSR), and Super Critical Water-cooled Reactor (SCWR). The purpose of this study is to know the development of Generation IV nuclear power plants that have been done by the thirteen countries that are members of the Gen IV International Forum (GIF). The method used is review study and refers to various studies related to the current status of research and development of generation IV nuclear power. The result of this study showed that the systems and technology on Generation IV nuclear power plants offer significant advances in sustainability, safety and reliability, economics, and proliferation resistance and physical protection. In addition, based on the research and development experience is estimated that: SFR can be used optimally in 2015, VHTR in 2020, while NPP types GFR, LFR, MSR, and SCWR in 2025. Utilization of NPP generation IV said to be optimal if fulfill the goal of NPP generation IV, such as: capable to generate energy sustainability and promote long-term availability of nuclear fuel, minimize nuclear waste and reduce the long term stewardship burden, has an advantage in the field of safety and reliability compared to the previous generation of NPP and VHTR technology have a good prospects in Indonesia. (author)

  6. Bioresorbable stents: Current and upcoming bioresorbable technologies.

    Science.gov (United States)

    Ang, Hui Ying; Bulluck, Heerajnarain; Wong, Philip; Venkatraman, Subbu S; Huang, Yingying; Foin, Nicolas

    2017-02-01

    Bioresorbable scaffolds (BRS) represent a novel horizon in interventional cardiology for the treatment of coronary artery disease. The technology was introduced to overcome limitations of current metallic drug-eluting stents such as late in-stent restenosis and permanently caging the vessel. The concept of the BRS is to provide temporal support to the vessel during healing before being degraded and resorbed by the body, promoting restoration of the vessel vasomotion. Currently, there are several BRS that are under development or already commercially available. Although several reviews have elegantly covered progress of current clinical programs and newer scaffold technologies, little is available currently to describe the mechanistic differences between biomaterials used in current and newer bioresorbable technologies. This aim of this review is to discuss the status of the different BRS technologies and materials currently under investigation, explore the newer strategies being adopted to improve material mechanical properties and optimize BRS degradation and summarize the performance of BRS in the clinical setting so far. Copyright © 2016. Published by Elsevier Ireland Ltd.

  7. Development of inherent technologies for advanced PWR core - A study on the current status and the construction feasibility of critical facilities

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Won Sik; Yang, Hyun Seok [Chosun University, Kwangju (Korea); Kim, Chang Hyo; Shim, Hyung Jin [Seoul National University, Seoul (Korea)

    1999-03-01

    The objective of this study is to examine the appropriateness of constructing critical facilities in our country and to decide a course of constructing them if necessary by surveying the status and utilization of foreign facilities and by investigating the demand for domestic facilities. We investigated the status and the utilization of foreign critical facilities through literature survey and personal visitation. In our judgement, critical facilities are necessary for developing the advanced reactors and fuels which are being studied as parts of the Nuclear R and D Program by MOST. Considering the construction cost and the current state of domestic economy, however, it is unjustifiable to build three different types of critical facilities (the light water, the heavy water, and the fast critical facility). It appears to be reasonable to build a light water critical, considering the construction cost, degree of utilization, and other constraints. (author). 89 refs., 134 figs., 64 tabs.

  8. The Current Status of STEM Education Research

    Science.gov (United States)

    Brown, Josh

    2012-01-01

    This paper explores the current Science, Technology, Engineering and Mathematics (STEM) education research base through an analysis of articles from eight journals focused on the STEM disciplines. Analyzed are both practitioner and research publications to determine the current scope of STEM education research, where current STEM education…

  9. Genetic cancer vaccines: current status and perspectives.

    Science.gov (United States)

    Aurisicchio, Luigi; Ciliberto, Gennaro

    2012-08-01

    The recent approval of the first therapeutic cancer vaccine by the US Regulatory Agency represents a breakthrough event in the history of cancer treatment. The past scepticism towards this type of therapeutic intervention is now replaced by great expectations. The field is now moving towards the development of alternative vaccination technologies, which are capable of generating stronger, more durable and efficient immune responses against specific tumour-associated antigens (TAAs) in combination with cheaper and more standardised manufacturing. In this context, genetic vaccines are emerging among the most promising methodologies. Several evidences point to combinations of different genetic immunisation modalities (heterologous prime/boost) as a powerful approach to induce superior immune responses and achieve greater clinical efficacy. In this review, we provide an overview of the current status of development of genetic cancer vaccines with particular emphasis on adenoviral vector prime/DNA boost vaccination schedules. We believe that therapeutic genetic cancer vaccines have the strong potential to become an established therapeutic modality for cancer in next coming years, in a manner similar to what have now become monoclonal antibodies.

  10. Oxygen/hydrogen technology test bed status update

    Science.gov (United States)

    Richards, J. S.

    1988-01-01

    An overview is provided of the Hydrogen/Oxygen Technology Test Bed program. The status of the program, the program direction, plans for testing, and plans for technology implementation within the program are delineated. Test Bed goals and objectives are defined and the current status of the Test Bed engine is provided. A test facility status and a summary of the test facility capabilities are given.

  11. Current Status and Prospects of Biodiesel Production from Microalgae

    Directory of Open Access Journals (Sweden)

    Yuhuan Liu

    2012-07-01

    Full Text Available Microalgae represent a sustainable energy source because of their high biomass productivity and ability to remove air and water born pollutants. This paper reviews the current status of production and conversion of microalgae, including the advantages of microalgae biodiesel, high density cultivation of microalgae, high-lipid content microalgae selection and metabolic control, and innovative harvesting and processing technologies. The key barriers to commercial production of microalgae biodiesel and future perspective of the technologies are also discussed.

  12. ATM in Europe: analysis of current status

    DEFF Research Database (Denmark)

    1999-01-01

    This deliverable provides an overview of the current status of the European market for ATM services. The offer of ATM services by principal operators in Belgium, Denmark, Finland, France, Germany, Greece, Italy, Norway, Portugal, Spain, Sweden and United Kingdom is described. In addition, a number...

  13. REMPAN at international level: current status

    International Nuclear Information System (INIS)

    Souchkevitch, Guennadi

    1997-01-01

    This document describes the current status of the Radiation Emergency medical Preparedness and Assistance Network - REMPAN, for the promotion of radiation emergency medical and public health preparedness and for practical assistance and advising countries, in a case of overexposure from any sources of radiation, by initiative of the World Health Organization - WHO

  14. Models of Solar Irradiance Variations: Current Status

    Indian Academy of Sciences (India)

    2016-01-27

    Jan 27, 2016 ... Models of Solar Irradiance Variations: Current Status. Natalie A. ... Regular monitoring of solar irradiance has been carried out since 1978 to show that solar total and spectral irradiance varies at different time scales. Whereas ... Max Planck Institute for Solar System Research, Katlenburg-Lindau, Germany.

  15. Current status of the AUSTRON project

    International Nuclear Information System (INIS)

    Rauch, H.; Regler, M.; Lechner, R.E.; Weber, H.

    2001-01-01

    The current status of the AUSTRON spallation source project is described with reference to the need for neutrons in Europe and - due to a certain West-East imbalance of large research facilities - especially in Central Europe. A short overview about technical aspects of proton accelerator, rapid cycling synchrotron, storage ring, target and instrumentation is presented. (author)

  16. Acidic deposition: State of science and technology. Report 9. Current status of surface-water acid-base chemistry. Final report

    International Nuclear Information System (INIS)

    Baker, L.A.; Kaufmann, P.R.; Brakke, D.F.; Herlihy, A.T.; Eilers, J.M.

    1990-09-01

    The report is based largely upon the National Surface Water Survey (NSWS), augmented by numerous smaller state and university surveys and many detailed watershed studies. In describing the current status of surface waters, the authors go far beyond the description of population statistics, although some of this is necessary, and direct their attention to the interpretation of these data. They address the question of the sources of acidity to surface waters in order to determine the relative importance of acidic deposition compared with other sources, such as naturally produced organic acids and acid mine drainage. They also examine in some detail what they call 'high interest' populations-the specific groups of lakes and streams most likely to be impacted by acidic deposition. The authors then turn to the general question of uncertainty, and finally examine low alkalinity surface waters in several other parts of the world to develop further inferences about the acid-base status of surface waters in the United States

  17. Current status of VHTR development in Japan

    International Nuclear Information System (INIS)

    Aochi, A.; Kondo, T.

    1982-01-01

    The status of the program at the beginning of fiscal 1982 is reviewed. Special emphasis is placed on the altering of the output helium temperature of the experimental VHTR to 950 0 . The modification is aimed at establishing the technical basis for post-experimental VHTR output helium temperature of 1000 0 C. Notes are given on the design of the VHTR as well as various research and development efforts in Japan on multi-purpose nuclear heat applications and HTGR technology

  18. Current status of neutron scattering in Thailand

    International Nuclear Information System (INIS)

    Kornduangkaeo, Areeratt; Pongkasem, Somchai; Putchar, Suriya; Ampornrat, Pantip; Kajornrith, Varavuth; Chamchang, Jipawat

    2006-01-01

    The current neutron powder diffractometer at the Thai Research Reactor-1/Modification 1 (TRR-1/M1) has been modified from the obsolete neutron diffractometer which had been used during 1968-1975. The upgraded diffractometer has medium resolution and is appropriate for studying samples with small unit cell dimensions and training university students in the field of neutron scattering. This paper describes the current activities of neutron scattering research in Thailand, the current status of a new research reactor project at Ongkarak for enlarging the perspectives of its utilization in the future as well as the organizational reformation of the Office of Atomic Energy for Peace (OAEP). (author)

  19. Cancer pain management-current status

    Directory of Open Access Journals (Sweden)

    Deepak Thapa

    2011-01-01

    Full Text Available Cancer pain is still one of the most feared entities in cancer and about 75% of these patients require treatment with opioids for severe pain. The cancer pain relief is difficult to manage in patients with episodic or incidental pain, neuropathic pain, substance abuse and with impaired cognitive or communication skills. This non-systematic review article aims to discuss reasons for under treatment, tools of pain assessment, cancer pain and anxiety and possibly carve new approaches for cancer pain management in future. The current status of World Health Organization analgesic ladder has also been reviewed. A thorough literature search was carried out from 1998 to 2010 for current status in cancer pain management in MEDLINE, WHO guidelines and published literature and relevant articles have been included.

  20. Tackling dengue fever: Current status and challenges

    OpenAIRE

    Nedjadi, Taoufik; El-Kafrawy, Sherif; Sohrab, Sayed S.; Despr?s, Philippe; Damanhouri, Ghazi; Azhar, Esam

    2015-01-01

    According to recent statistics, 96 million apparent dengue infections were estimated worldwide in 2010. This figure is by far greater than the WHO prediction which indicates the rapid spread of this disease posing a growing threat to the economy and a major challenge to clinicians and health care services across the globe particularly in the affected areas. This article aims at bringing to light the current epidemiological and clinical status of the dengue fever. The relationship between gene...

  1. Current status of low energy EB machine

    International Nuclear Information System (INIS)

    Toshiro Nishikimi; Shuichi Taniguchi; Kenichi Mizusawa

    1999-01-01

    Electron beam processing systems have been in use in a variety of applications such as curing of paints and printing inks, crosslinking of PE products, treating of rubber tire and so on. Low energy electron processing systems have become popular as self-shielded machines, which are compact and easy to use and do not require special facility as an irradiation room. This manuscript introduces the status of low energy EB (electron beam) machine through Nissin's products current

  2. Current status and prospects of research reactors

    International Nuclear Information System (INIS)

    Gabaraev, A.B.; Cherepnin, Yu.S.; Tretyakov, I.T.; Khmelshikov, V.V.; Dollezhal, N.A.

    2009-01-01

    Full text: The first nuclear research reactors (RR) appeared in the 1940s. Their initial purpose was to provide knowledge of the main processes associated with neutron-induced nuclear reactions. Later, the rang of problems addressed expanded substantially. Besides fundamental research in the properties of matter, such reactors are successfully used for dealing with problems in the fields of materials science, nuclear engineering, medicine, isotope production, education, etc. Over the whole period of RR fleet growth, more than six hundred nuclear research facilities were built in 70 countries of the world. As of the end of 2008, the number of Russian research reactors in service was about 20% of the globally operating RR fleet. This paper discusses the current status of the world's RR fleet and describes the capabilities of the experimental reactor facilities existing in Russia. In the 21st century, research reactors will remain in demand to solve scientific and technological problems for innovative development of society. The emerging renaissance of nuclear power, the expanding RR uses for production of isotopes and other applications, the increase in the number of countries willing to use nuclear technologies in energy production, industry and science - all contribute to a rebirth of interest in research reactors. One of the ways to improve the experimental capabilities lies in radical upgrading of the reactor facilities with qualitative changes in the main neutronic characteristics of the core. The associated design approaches are illustrated with the example of the IBR-2M reactor at the JNRI in Dubna. The imperative need restricting the spread of nuclear threat leads us to give up using highly enriched uranium in most research reactors. Development of RR fuel with reduced enrichment in uranium has been one of the priority objectives of NIKIET for many years. This paper presents the latest results obtained along these lines, as applied to pool-type research

  3. Current Status of Deep Geological Repository Development

    International Nuclear Information System (INIS)

    Budnitz, R J

    2005-01-01

    This talk provided an overview of the current status of deep-geological-repository development worldwide. Its principal observation is that a broad consensus exists internationally that deep-geological disposal is the only long-term solution for disposition of highly radioactive nuclear waste. Also, it is now clear that the institutional and political aspects are as important as the technical aspects in achieving overall progress. Different nations have taken different approaches to overall management of their highly radioactive wastes. Some have begun active programs to develop a deep repository for permanent disposal: the most active such programs are in the United States, Sweden, and Finland. Other countries (including France and Russia) are still deciding on whether to proceed quickly to develop such a repository, while still others (including the UK, China, Japan) have affirmatively decided to delay repository development for a long time, typically for a generation of two. In recent years, a major conclusion has been reached around the world that there is very high confidence that deep repositories can be built, operated, and closed safely and can meet whatever safety requirements are imposed by the regulatory agencies. This confidence, which has emerged in the last few years, is based on extensive work around the world in understanding how repositories behave, including both the engineering aspects and the natural-setting aspects, and how they interact together. The construction of repositories is now understood to be technically feasible, and no major barriers have been identified that would stand in the way of a successful project. Another major conclusion around the world is that the overall cost of a deep repository is not as high as some had predicted or feared. While the actual cost will not be known in detail until the costs are incurred, the general consensus is that the total life-cycle cost will not exceed a few percent of the value of the

  4. Present status of foreign reprocessing technology

    International Nuclear Information System (INIS)

    Otagaki, Takao; Ishikawa, Yasusi; Mori, Jyunichi

    2000-03-01

    In considering extensively and evaluating advanced nuclear fuel recycle technologies then selecting credible one among those technology options and establishing practicable plan of future fast reactor fuel recycle technology, it is important to investigate foreign reprocessing information extensively and minutely as much as possible then to know trends of reprocessing technology development in the world and present technology level of each country. This report is intending to present information of the status and the technology of operating, constructing and closed foreign reprocessing facilities in the world, including, mixed oxide (MOX) fuel reprocessing technology. The conceptual study of 'Foreign Reprocessing Technology Database' was also performed in order to add or revise the information easily. The eight countries, France, The U.K., Russia, The U.S., Germany, Belgium, India and China, were studied regarding outline of the facilities, operation status, future plan, technical information of process flow sheet, primary components, maintenance system etc, construction and operating costs, accidents or troubles, decommissioning status. (author)

  5. CURRENT TECHNOLOGIES OF AMMONIUM WITHDRAWAL FROM WASTEWATER

    Directory of Open Access Journals (Sweden)

    O. M. Shved

    2014-10-01

    Full Text Available The results of analysis of the current technologies, as well as their trends and developments in the field of wastewater treatment in Ukraine and the world are given. The legal documents and the system of state regulation and control in the field of sanitation and wastewater treatment in Ukraine have been analyzed. The information about government programs aimed at protecting the natural water bodies is also included. The global trends concerning development of biotechnology in the field of wastewater from nitrogen compounds have been investigated. The analysis of traditional (nitrification-denitrification and the latest biotechnology wastewater from inorganic nitrogen has been done. Current status of the present key technologies of nitrogen removal from wastewater has been formulated. The main advantages and disadvantages of these biotechnologies are described. It was determined that a major problem in the field of sanitation and wastewater treatment in Ukraine is the usage of outdated technologies and regulatory documentation that is a consequence of the lack of sufficient funding for the sector and the low level of environmental awareness of the government and the population.

  6. Current status and installation of dental PACS

    International Nuclear Information System (INIS)

    Park, Chang Seo; Kim, Kee Deog; Park, Hyok; Jeong, Ho Gul

    2004-01-01

    Picture Archiving and Communication System (PACS) is difficult to implement in the best of situations, but evidence is growing that the benefits are significant. The aims of this study are to analyze the current status of full PACS and establish successful installation standard of dental PACS. Materials and Methods were based on the investigation of current working status and installation standard of PACS, and observation of variable issues to installation of dental PACS. By September 30, 2004, full PACS implementations in their facilities were 88.1% in specialized general hospitals (37 installations out of total 42 hospitals), 59.8% in general hospitals (144 installations out of total 241 hospitals), 12.3% in medical hospitals (116 installations out of total 941 hospitals) and 3.6% in dental hospitals (4 installations out of total 110 hospitals). Only 4 university dental hospitals currently have installed and are operating full PACS. Major obstacle to wide spread of dental PACS is initial high investments. Clinical environments of dental PACS differed from medical situation. Because of characteristic dental practice, the initial investments for dental PACS are generally much greater than those of medical PACS. Also new economic crisis makes users scruple. The best way to overcome these limitations is to establish an economic installation standard for dental PACS. Also the clear technical communication between the customer and the supplier before both sides are committed to the obstacles are critical to its success.

  7. Current Status and Prospects of Biodiesel Production from Microalgae

    OpenAIRE

    Xiaodan Wu; Rongsheng Ruan; Zhenyi Du; Yuhuan Liu

    2012-01-01

    Microalgae represent a sustainable energy source because of their high biomass productivity and ability to remove air and water born pollutants. This paper reviews the current status of production and conversion of microalgae, including the advantages of microalgae biodiesel, high density cultivation of microalgae, high-lipid content microalgae selection and metabolic control, and innovative harvesting and processing technologies. The key barriers to commercial production of microalgae biodie...

  8. Current Trends in Higher Education Technology: Simulation

    Science.gov (United States)

    Damewood, Andrea M.

    2016-01-01

    This paper is focused on how technology in use changes over time, and the current trend of simulation technology as a supported classroom technology. Simulation-based training as a learning tool is discussed within the context of adult learning theories, as is the technology used and how today's higher education technology administrators support…

  9. Neutrino astronomy current status, future prospects

    CERN Document Server

    Karle, Albrecht

    2017-01-01

    This review volume is motivated by the recent discovery of high-energy astrophysical neutrinos by IceCube. The aim of the book is to bring together chapters on the status of current and future neutrino observatories with chapters on the implications and possible interpretations of the present observations and their upper limits. Each chapter is a mini-review of one aspect of the subject by leading experts. Taken together, the chapters constitute an up-to-date review of high-energy astrophysical neutrinos and their potential sources.

  10. Fuel Cell Technology Status Analysis Project: Partnership Opportunities

    Energy Technology Data Exchange (ETDEWEB)

    2017-03-13

    Fact sheet describing the National Renewable Energy Laboratory's (NREL's) Fuel Cell Technology Status Analysis Project. NREL is seeking fuel cell industry partners from the United States and abroad to participate in an objective and credible analysis of commercially available fuel cell products to benchmark the current state of the technology and support industry growth.

  11. The ENIQ pilot study: current status

    Energy Technology Data Exchange (ETDEWEB)

    Lemaitre, P.; Eriksen, B.; Crutzen, S. [European Commission, DG Joint Research Centre, Petten (Netherlands); Hansch, M. [Preussische Elektrizitaets-AG (Preussenelektra), Hannover (Germany); Whittle, J. [AEA Technology, Warrington (United Kingdom)

    1998-11-01

    A pilot study is currently being carried out by ENIQ (European Network for Inspection Qualification) in order to explore the issues involved in inspection qualification applied along the general principles of the European methodology. The components selected for the pilot study are austenitic pipe to pipe and pipe to elbows welds typical of those in BWR recirculation loops. A range of defect parameters has been defined. A suitable inspection procedure designed to find the designated defects will be applied to geometrically representative test pieces. The procedure/equipment will be qualified through open trials and technical justification. The personnel qualification will be done in a blind way. Once all features of the inspection system will have been qualified an in-service inspection will be simulated in order to test the feasibility of the qualification approach followed. In this paper the current status of this pilot study is discussed. (orig.)

  12. Radiation Metabolomics: Current Status and Future Directions

    Directory of Open Access Journals (Sweden)

    Smrithi eSugumaran Menon

    2016-02-01

    Full Text Available Human exposure to ionizing radiation disrupts normal metabolic processes in cells and organs by inducing complex biological responses that interfere with gene and protein expression. Conventional dosimetry, monitoring of prodromal symptoms and peripheral lymphocyte counts are of limited value as organ and tissue specific biomarkers for personnel exposed to radiation, particularly, weeks or months after exposure. Analysis of metabolites generated in known stress-responsive pathways by molecular profiling helps to predict the physiological status of an individual in response to environmental or genetic perturbations. Thus, a multi-metabolite profile obtained from a high resolution mass spectrometry-based metabolomics platform offers potential for identification of robust biomarkers to predict radiation toxicity of organs and tissues resulting from exposures to therapeutic or non-therapeutic ionizing radiation. Here, we review the status of radiation metabolomics and explore applications as a standalone technology, as well as its integration in systems biology, to facilitate a better understanding of the molecular basis of radiation response. Finally, we draw attention to the identification of specific pathways that can be targeted for the development of therapeutics to alleviate or mitigate harmful effects of radiation exposure.

  13. Current Trends In Educational Technology: Implication On ...

    African Journals Online (AJOL)

    This paper presents the current trends in educational technology and the implication on educational managers in Nigeria. The current trends in the field of educational technology are centred on the influence of information and communication technology on the development of educational management. Various challenges ...

  14. Review of ORNL's MSR technology and status

    International Nuclear Information System (INIS)

    Toth, L.M.; Gat, U.; Del Cul, G.D.; Dai, S.; Williams, D.F.

    1996-01-01

    The current status of molten salt reactor development is discussed with reference to the experience from the Oak Ridge Molten Salt Reactor Experiment. Assessment of the future for this reactor system is reviewed with consideration of both advantages and disadvantages. Application of this concept to ADTT (accelerator driven transmutation technology) needs appears to be feasible by drawing on the MSRE experience. Key chemical considerations remain as: solubility, redox behavior, and chemical activity and their importance to ADTT planning is briefly explained. Priorities in the future development of molten salts for these applications are listed, with the foremost being the acceptance of the 2LiF-BeF 2 solvent system. 8 refs, 2 figs

  15. Current technologies in vehicular communication

    CERN Document Server

    Dimitrakopoulos, George

    2017-01-01

    This book provides a concise and comprehensive overview of vehicular communication technologies. It classifies all relevant standards, protocols and applications, so as to enable the reader to gain a holistic approach towards the subject of vehicular communications. The primary methods are algorithmic processes and simulation results. First, an overview and classification of vehicular technologies is presented. Then, the book focuses on specific applications of V2V and V2I communications. Special attention is given to recent research and development results regarding R&D projects in the field, in cooperation with car manufacturing companies and universities at a global level. Designed to facilitate understanding of vehicle to vehicle and vehicle to infrastructure technologies, this textbook is appropriate for undergraduate and graduate students of vehicular communications or mobile networks.

  16. Current status of SFR development in Japan

    International Nuclear Information System (INIS)

    Ieda, Yoshiaki; Chikazawa, Yoshitaka

    2012-01-01

    Fast Reactor development experiences and status in Japan are summarized. Even though international SFR circumstances were against in 1980s and 1990s, e.g. CRBRP, SNR-300 and Superphenix terminations, we kept on with our R and D activities steadily aiming at positive development targets in Japan. As results of our efforts, it has shown that our commercialized SFR concept, Japan Sodium-cooled Fast Reactor (JSFR) could meet the targets in the Feasibility Study on Commercialized Fast Reactor Cycle Systems (FS) and the Fast Reactor Cycle Technology Development (FaCT) project. Further, Monju has finally achieved restart in May 2010 after having been shut for almost 15 years. A future plan of Monju is to be determined based on a direction of the national nuclear and energy policies that will be established in 2012. The undergoing FaCT project is pursuing commercialization of fast reactor cycle system around 2050 under cooperation of MEXT (Ministry of Education, Culture, Sports, Science and Technology), METI (Ministry of Economy, Trade and Industry), utilities, venders and JAEA (Japan Atomic Energy Agency). As results of the FaCT Phase I, feasibility of the key technologies for JSFR has been evaluated and the project is waiting for launching the phase II due to the Tohoku large earthquake. It is considered that the nuclear development policy might be affected by the Tohoku large Earthquake/Tsunami in Japan. Nevertheless the significance of nuclear energy will not be changed and thus we will focus on the issues learnt from Fukushima accidents and reflect into the improvement of the safety of Monju and the safety design criteria for the next generation Fast Reactor systems. (orig.)

  17. Thermionic fuel element technology status

    Science.gov (United States)

    Holland, J. W.; Horner, M. W.; Yang, L.

    1985-01-01

    The results of research, conducted between the mid-1960s and 1973, on the multiconverter thermionic fuel elements (TFEs) that comprise the reactor core of an SP-100 thermionic reactor system are presented. Fueled-emitter technology, insulator technology and cell and TFE assembly technology of the prototypical TFEs which were tested in-pile and out-of-pile during these years are described. The proto-TFEs have demonstrated reproducible performance within 5 percent and no premature failures within the 1.5 yr of operation (with projected 3-yr lifetimes). The two primary life-limiting factors had been identified as thermionic emitter dimensional increase due to interactions with the fuel and electrical insulator structural damage from fast neutrons. Multiple options for extending TFE lifetimes to 7 yr or longer are available and will be investigated in the 1984-1985 SP-100 program for resolution of critical technology issues. Design diagrams and test graphs are included.

  18. MGEX data analysis at CODE - current status

    Science.gov (United States)

    Prange, Lars; Dach, Rolf; Lutz, Simon; Schaer, Stefan; Jäggi, Adrian

    2013-04-01

    The Center for Orbit Determination in Europe (CODE) is contributing as an analysis center to the International GNSS Service (IGS) since many years. The processing of GPS and GLONASS data is well established in CODE's ultra-rapid, rapid, and final product lines. In 2012 the IGS started its "Multi GNSS EXperiment" (MGEX). Meanwhile (status end of 2012) about 50 new or upgraded MGEX tracking stations offer their data to the user community meeting the IGS standards (e.g., correct equipment information, calibrated antennas, RINEX data format). MGEX supports the RINEX3 data format, new signal types for the established GNSS (e.g., L5 for GPS), and new GNSS, such as Galileo, Compass, and QZSS. It is therefore well suited as a testbed for future developments in GNSS processing. CODE supports MGEX by providing a three-system orbit solution (GPS+GLONASS+Galileo) on a non-operational basis. The CODE MGEX products are freely available at ftp://cddis.gsfc.nasa.gov/gnss/products/mgex (solution ID "com" stands for CODE-MGEX). The current status of the MGEX processing at CODE will be presented focusing on the consistency of GNSS-derived results based on different frequencies/signals. An outlook about CODE's future multi-GNSS activities will be given.

  19. Interventional Radiology of Male Varicocele: Current Status

    Energy Technology Data Exchange (ETDEWEB)

    Iaccarino, Vittorio, E-mail: vittorio.iaccarino@unina.it; Venetucci, Pietro [University of Naples ' Federico II' , Diagnostic Imaging Department-Cardiovascular and Interventional Radiology, School of Medicine (Italy)

    2012-12-15

    Varicocele is a fairly common condition in male individuals. Although a minor disease, it may cause infertility and testicular pain. Consequently, it has high health and social impact. Here we review the current status of interventional radiology of male varicocele. We describe the radiological anatomy of gonadal veins and the clinical aspects of male varicocele, particularly the physical examination, which includes a new clinical and ultrasound Doppler maneuver. The surgical and radiological treatment options are also described with the focus on retrograde and antegrade sclerotherapy, together with our long experience with these procedures. Last, we compare the outcomes, recurrence and persistence rates, complications, procedure time and cost-effectiveness of each method. It clearly emerges from this analysis that there is a need for randomized multicentre trials designed to compare the various surgical and percutaneous techniques, all of which are aimed at occlusion of the anterior pampiniform plexus.

  20. Interventional Radiology of Male Varicocele: Current Status

    International Nuclear Information System (INIS)

    Iaccarino, Vittorio; Venetucci, Pietro

    2012-01-01

    Varicocele is a fairly common condition in male individuals. Although a minor disease, it may cause infertility and testicular pain. Consequently, it has high health and social impact. Here we review the current status of interventional radiology of male varicocele. We describe the radiological anatomy of gonadal veins and the clinical aspects of male varicocele, particularly the physical examination, which includes a new clinical and ultrasound Doppler maneuver. The surgical and radiological treatment options are also described with the focus on retrograde and antegrade sclerotherapy, together with our long experience with these procedures. Last, we compare the outcomes, recurrence and persistence rates, complications, procedure time and cost-effectiveness of each method. It clearly emerges from this analysis that there is a need for randomized multicentre trials designed to compare the various surgical and percutaneous techniques, all of which are aimed at occlusion of the anterior pampiniform plexus.

  1. CHEMOTAXONOMIC CONTRIBUTIONS TO CURRENT STATUS OF CAPRIFOLIACEAE

    Directory of Open Access Journals (Sweden)

    Foción A. Rojas-Márquez

    2015-09-01

    Full Text Available The aim of this works is approached from the point of view chemotaxonomic disputes that currently exist in relation to the internal classification of the family Caprifoliaceae. For this was a comprehensive literature review of several of the species that make up this family; the review devoted itself not only to the achievement of botanical and phytochemical work aspect, but to search for any other information chemotaxonomic character. Through it was possible to establish important relations with respect to the internal division of this family, which they were based primarily on the presence or absence of certain secondary metabolites that in this case they serve as chemotaxonomic markers. With all this it can reach important conclusions regarding the taxonomic status of this family, which substantiate the latest systematic proposals proposed for this family.

  2. Approach of field-emission display toward technology status

    Science.gov (United States)

    Ghrayeb, Joseph; Jackson, Timothy W.; Hopper, Darrel G.; Daniels, Reginald

    1998-09-01

    Flat panel display (FPD) technologies have emerged with smaller depth, size, and power than the cathode ray tube technology that now dominates the display market. Liquid crystal displays in general and active matrix liquid crystal displays (AMLCD), in particular, are the FPD technology of choice. The AMLCD technology is well established has undergone dramatic improvements in the past few years, a trend which is likely to continue. In recent years some potential or want-to- be ('wanabe') alternate technologies, such as field emission displays (FED), high gain emissive displays and vacuum fluorescent displays (VFD), have received substantial investments. For example, the VFD knowledge level has reached technology status as segmented displays in automotive and instrumentation applications. Much work has been done to improve FED technology status, resulting in many attempts to build production quality prototypes. However, no FED has actually gone into production. The question still remains: how close to production are these nascent technologies? This paper will examine how fast field emission displays are progressing towards technology status, which is defined as a display technology that is incorporated in products accepted by the market. This paper will provide a status update of where FED companies are and where they may be heading. Current development programs, recent demonstrations, and possible future product offerings will be discussed.

  3. Cytomegalovirus Vaccines: Current Status and Future Prospects

    Science.gov (United States)

    Anderholm, KM; Bierle, CJ; Schleiss, MR

    2017-01-01

    Congenital human cytomegalovirus (HCMV) infection can result in in severe and permanent neurological injury in newborns, and vaccine development is accordingly a major public health priority. HCMV can also cause disease in solid organ (SOT) and hematopoietic stem cell transplant (HSCT) recipients, and a vaccine would be valuable in prevention of viremia and end-organ disease in these populations. Currently there is no licensed HCMV vaccine, but progress toward this goal has been made in recent clinical trials. A recombinant HCMV glycoprotein B (gB) vaccine has been shown to have some efficacy in prevention of infection in young women and adolescents, and provided benefit to HCMV-seronegative SOT recipients. Similarly, DNA vaccines based on gB and the immunodominant T-cell target, pp65 (ppUL83), have been shown to reduce viremia in HSCT patients. This review provides an overview of HCMV vaccine candidates in various stages of development, as well as an update on the current status of ongoing clinical trials. Protective correlates of vaccine-induced immunity may be different for pregnant woman and transplant patients. As more knowledge emerges about correlates of protection, the ultimate licensure of HCMV vaccines may reflect the uniqueness of the target populations being immunized. PMID:27882457

  4. Food traceability systems in China: The current status of and future perspectives on food supply chain databases, legal support, and technological research and support for food safety regulation.

    Science.gov (United States)

    Tang, Qi; Li, Jiajia; Sun, Mei; Lv, Jun; Gai, Ruoyan; Mei, Lin; Xu, Lingzhong

    2015-02-01

    Over the past few decades, the field of food security has witnessed numerous problems and incidents that have garnered public attention. Given this serious situation, the food traceability system (FTS) has become part of the expanding food safety continuum to reduce the risk of food safety problems. This article reviews a great deal of the related literature and results from previous studies of FTS to corroborate this contention. This article describes the development and benefits of FTS in developed countries like the United States of America (USA), Japan, and some European countries. Problems with existing FTS in China are noted, including a lack of a complete database, inadequate laws and regulations, and lagging technological research into FTS. This article puts forward several suggestions for the future, including improvement of information websites, clarification of regulatory responsibilities, and promotion of technological research.

  5. The current status of coal liquefaction technologies - Panorama 2008; La liquefaction du charbon: ou en est-on aujourd'hui? - Panorama 2008

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    In 2008, a first coal liquefaction unit to produce motor fuel (20,000 BPSD) will come on-stream in Shenhua, China (in the Ercos region of Inner Mongolia). Other, more ambitious projects have been announced in China for between now and 2020. Since oil production is expected to peak in the medium term, this technology may develop regionally in the next 20 years to cover ever-increasing demand for motor fuel.

  6. Current advances in seismic technology

    International Nuclear Information System (INIS)

    Sherwood, J.R.

    1996-01-01

    Recent advances in seismic technology that impact on the estimation of reserves and reduction in risks associated with reserves estimates, were discussed. It was noted that seismic data along with subsurface geological and engineering data is a powerful tool that has applications to interpret the petroleum system and the reserves associated with that system. For example, seismic data can be used to define the location of reserves and to show results of drilling activity. Other reserve parameters that can be estimated using seismic tools are: area, thickness, porosity, saturation, recovery factor, and formation volume factor. Two case histories where seismic techniques were used for reserves estimation were described

  7. Cacao biotechnology: current status and future prospects.

    Science.gov (United States)

    Wickramasuriya, Anushka M; Dunwell, Jim M

    2018-01-01

    Theobroma cacao-The Food of the Gods, provides the raw material for the multibillion dollar chocolate industry and is also the main source of income for about 6 million smallholders around the world. Additionally, cocoa beans have a number of other nonfood uses in the pharmaceutical and cosmetic industries. Specifically, the potential health benefits of cocoa have received increasing attention as it is rich in polyphenols, particularly flavonoids. At present, the demand for cocoa and cocoa-based products in Asia is growing particularly rapidly and chocolate manufacturers are increasing investment in this region. However, in many Asian countries, cocoa production is hampered due to many reasons including technological, political and socio-economic issues. This review provides an overview of the present status of global cocoa production and recent advances in biotechnological applications for cacao improvement, with special emphasis on genetics/genomics, in vitro embryogenesis and genetic transformation. In addition, in order to obtain an insight into the latest innovations in the commercial sector, a survey was conducted on granted patents relating to T. cacao biotechnology. © 2017 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.

  8. "On-off" switchable tool for food sample preparation: merging molecularly imprinting technology with stimuli-responsive blocks. Current status, challenges and highlighted applications.

    Science.gov (United States)

    Garcia, Raquel; Gomes da Silva, Marco D R; Cabrita, Maria João

    2018-01-01

    Sample preparation still remains a great challenge in the analytical workflow representing the most time-consuming and laborious step in analytical procedures. Ideally, sample pre-treatment procedures must be more selective, cheap, quick and environmental friendly. Molecular imprinting technology is a powerful tool in the development of highly selective sample preparation methodologies enabling to preconcentrate the analytes from a complex food matrix. Actually, the design and development of molecularly imprinted polymers-based functional materials that merge an enhancement of selectivity with a controllable and switchable mode of action by means of specific stimulus constitutes a hot research topic in the field of food analysis. Thus, combining the stimuli responsive mechanism and imprinting technology a new generation of materials are emerging. The application of these smart materials in sample preparation is in early stage of development, nevertheless new improvements will promote a new driven in the demanding field of food sample preparation. The new trends in the advancement of food sample preparation using these smart materials will be presented in this review and highlighted the most relevant applications in this particular area of knowledge. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. Current Status of Engineering Education in America

    Science.gov (United States)

    Barr, Ronald E.

    Many faculty believe that engineering education in America is at a crossroads and much change is needed. International competition in engineering and the global economy have major potential impact on the engineering workforce of the future. We must find ways to educate U.S. engineers to be competitive and creative contributors in the worldwide arena. Recent national reports are sounding the alarm that the U.S. is losing it leadership in technology and innovation, with consequences for economic prosperity and national security. The report Rising Above the Gathering Storm discusses this dilemma in detail and offers four recommendations to U.S. policymakers. The report Educating the Engineer of 2020 discusses new ways to prepare American engineers for the 21st Century. Furthermore, changes in ABET accreditation, along with new paradigms of teaching and new technology in the classroom, are changing the scholarship of engineering education. We must find ways to promote change in engineering faculty for this new opportunity in engineering educational scholarship. Future engineering students are now in K-12, which is becoming an increasingly diverse population that in the past has not been fully represented in engineering education. Current trends show disaffection for pursuing studies in science and engineering in the youth of our U.S. society. We must find new ways to portray engineering as an exciting and rewarding career, and certainly as an educational platform for professional careers beyond the baccalaureate degree.

  10. [Cellular phones and cancer: current status].

    Science.gov (United States)

    Colonna, Anne

    2005-07-01

    Evaluation of the impact of new technologies on the human body is essential in order to impose regulations to limit health risks. The appearance and evolution of cellular phones have been one of the fastest in the history of innovation. Research reported worldwide has tried to evaluate any potential link between adverse health effects and the mobile phone and its broadcasting stations. This article gives an overview of current research knowledge on the impact of radiofrequency waves on health. Epidemiologic, cellular and animal studies have been carried out, but none of them have reached definitive conclusions. Although some biological effects on cell culture have been observed, their link with human cancer development is far from established. Most of the animal studies show negative results. Epidemiologic studies lack a sufficient perspective to be able to evaluate the effect of evolving technologies used today. High levels of concern by the public have urged mobile phone operators, manufacturers and governmental authorities to finance a number of scientific projects aimed at defining adapted and effective regulations.

  11. Status quo of supply technology

    Energy Technology Data Exchange (ETDEWEB)

    Noda, Shigeo

    1987-09-01

    Problems for gas supply function, activity of the Gas Association, and technological development mainly of the presented subjects are reported. According to the materials released by the Gas Associattion, demands for city gas by the 21st Century is expected to be rather high with 3.6% annual growth rate. It is premissed on an assumption that the superior quality of the city gas satisfying customer requirements would be further upgraded. The problems confronted by the supply function for this purpose are the pursuit for less cost, improvement in security, and stable gas supply. The Gas Association carried out research, investigation, preparation of standards, etc., and published instructive materials such as guide for main and branch piping, guide for supply piping, technical standards for gas related works, etc. It also has been endeavoring to popularize the use of polyethylene pipies, and studying the evaluation method for the renewal and repair of gas conduits and house regulator supply system, etc. The supply function has been working on the cutting dowm of costs, inprovement in security, and developing technologies such as underground probing radar, inteligent pipe locator, identifier for gas and water supply tubes, estimation of ground subsidence, inspection of inside of pipes by a television camera, etc. (1 tab)

  12. Current status of relativistic core collapse simulations

    Energy Technology Data Exchange (ETDEWEB)

    Font, Jose A [Departamento de Astronomia y Astrofisica, Universidad de Valencia, Dr. Moliner 50, 46100 Burjassot (Valencia) (Spain)

    2007-05-15

    With the first generation of ground-based gravitational wave laser interferometers already taking data, the availability of reliable waveform templates from astrophysical sources, which may help extract the signal from the anticipated noisy data, is urgently required. Gravitational stellar core collapse supernova has traditionally been considered among the most important astrophysical sources of potentially detectable gravitational radiation. Only very recently the first multidimensional simulations of relativistic rotational core collapse have been possible (albeit for models with simplified input physics), thanks to the use of conservative formulations of the hydrodynamics equations and advanced numerical methodology, as well as stable formulations of Einstein's equations. In this paper, the current status of relativistic core collapse simulations is discussed, with the emphasis given to the modelling of the collapse dynamics and to the computation of the gravitational radiation in the existing numerical approaches. Work employing the conformally-flat approximation (CFC) of the 3+1 Einstein's equations is reported, as well as extensions of this approximation (CFC+) and investigations within the framework of the so-called BSSN formulation of the 3+1 gravitational field equations (with no approximation for the spacetime dynamics). On the other hand, the incorporation of magnetic fields and the MHD equations in numerical codes to improve the realism of core collapse simulations in general relativity, is currently an emerging field where significant progress is bound to be soon achieved. The paper also contains a brief discussion of magneto-rotational simulations of core collapse, aiming at addressing the effects of magnetic fields on the collapse dynamics and on the gravitational waveforms.

  13. Current status of relativistic core collapse simulations

    International Nuclear Information System (INIS)

    Font, Jose A

    2007-01-01

    With the first generation of ground-based gravitational wave laser interferometers already taking data, the availability of reliable waveform templates from astrophysical sources, which may help extract the signal from the anticipated noisy data, is urgently required. Gravitational stellar core collapse supernova has traditionally been considered among the most important astrophysical sources of potentially detectable gravitational radiation. Only very recently the first multidimensional simulations of relativistic rotational core collapse have been possible (albeit for models with simplified input physics), thanks to the use of conservative formulations of the hydrodynamics equations and advanced numerical methodology, as well as stable formulations of Einstein's equations. In this paper, the current status of relativistic core collapse simulations is discussed, with the emphasis given to the modelling of the collapse dynamics and to the computation of the gravitational radiation in the existing numerical approaches. Work employing the conformally-flat approximation (CFC) of the 3+1 Einstein's equations is reported, as well as extensions of this approximation (CFC+) and investigations within the framework of the so-called BSSN formulation of the 3+1 gravitational field equations (with no approximation for the spacetime dynamics). On the other hand, the incorporation of magnetic fields and the MHD equations in numerical codes to improve the realism of core collapse simulations in general relativity, is currently an emerging field where significant progress is bound to be soon achieved. The paper also contains a brief discussion of magneto-rotational simulations of core collapse, aiming at addressing the effects of magnetic fields on the collapse dynamics and on the gravitational waveforms

  14. IAEA occupational radiation protection programme: current status

    International Nuclear Information System (INIS)

    Deboodt, P.; Mrabit, K.

    2006-01-01

    As stated in Art.III.A.6 of its Statute, the International Atomic Energy Agency (commonly referred to as the Agency) is authorized to establish or adopt, in consultation and, where appropriate, in collaboration with the competent organs of the United Nations and with the specialized agencies concerned, standards of safety for protection of health and minimization of danger to life and property (including such standards for labour conditions), and to provide for the application of these standards to its own operation as well as to the operations making use of materials, services, equipment, facilities, and information made available by the Agency or at its request or under its control or supervision. The Agency s Occupational Radiation Protection Programme aims at harmonizing infrastructures for the control of radiation exposure of workers and for optimizing radiation protection in situation s of exposures due to external radiation and intakes of radionuclides from both artificial and natural sources of radiation. Under its regular and technical cooperation programmes, the Agency has been assigning high priority to both the establishment of safety standards for labour conditions and for the application of these standards through, Interalia, direct assistance under its technical cooperation (TC) programme, the rendering of services, the promotion of education and training, the fostering of information exchange and the coordination of research and development. The purpose of this paper is to present the current status and future IAEA activities in support of occupational radiation protection. (authors)

  15. Current Status of the Large Millimeter Telescope

    Science.gov (United States)

    Chavez, M.; LMT Team

    2014-03-01

    I will briefly describe the current status of the Large Millimeter Telescope (LMT), the near-term plans for the telescope and the initial suite of instrumentation. I will also summarize some of the results of the Early Science Phase that took place in the summer of 2013. The LMT is a bi-national collaboration between Mexico and the USA, led by the Instituto Nacional de Astrofisica, Optica y Electronica (INAOE) and the University of Massachusetts at Amherst, to construct, commission and operate a 50m-diameter millimeter-wave radio telescope. Construction activities are complete at the 4600m LMT site on the summit of Volcan Sierra Negra, an extinct volcano in the Mexican state of Puebla. First light with the LMT (inner 32mdiameter) was successfully conducted in June and July of 2011, as well as the Early Science Phase in May-July 2013 with observations at both the 3 and 1.1mm wave-bands. The LMT antenna, outfitted with its initial complement of scientific instruments, will be a world-leading scientific research facility for millimeter-wave astronomy.

  16. Current status of JENDL-3.3

    Energy Technology Data Exchange (ETDEWEB)

    Hasegawa, Akira [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-03-01

    Current status of JENDL-3.3 is presented. Reevaluation work toward JENDL-3.3 has started last April for three years project to supply a consolidated new versions of JENDL by JAERI NDC (Nuclear Data center) with the cooperation of JNDC (Japanese Nuclear Data Committee). The working schedule has been fixed by the careful review of the summary report, `The problems of JENDL-3.2`, submitted to JNDC last March after one year discussions by a small advisory group: `Identifying the problems of JENDL-3.2`. To cope with the problems, two new subgroups are set up in the Subcommittee of Nuclear Data of JNDC. One is Heavy Mass Elements Evaluation Working Group for the re-evaluation of major actinides (Th-232, U-233,235,236,238, Pu-236,239,241,242). The other is Intermediate Mass Elements Evaluation Working Group for solving the inconsistencies between calculations and integral experiments relating to the fields of fusion neutronics and shielding applications as well as new evaluations such as Er elements. Supplying covariance data for important nuclides are one of the main feature of JENDL-3.3. Re-evaluated data will be released as JENDL-3.3 in the individual bases after the reviewing process by the experts. (author)

  17. Current status of art mobilization in Myeloma.

    Science.gov (United States)

    Sevindik, Omur Gokmen; Korkmaz, Serdal; Altuntas, Fevzi

    2017-12-01

    Multiple myeloma is the leading indication of autologous hematopoietic cell transplantation (AHCT) worldwide. Hematopoietic progenitor cell mobilization (HPCM) is the first step of a successful AHCT. A minimum of 2×10 6 CD34 + cells/kg are needed for successful engraftment. Growth factors have been used both alone or in combination with chemotherapy for HPCM of patients with myeloma. Mobilization failures result in delays in AHCT and increased cost and resource utility. Strategies to mobilize progenitor cells were mainly chemotherapy and growth factor or growth factor-only mobilization until the advent of plerixafor. Plerixafor is successfully integrated into both growth factor-only and cyclophosphamide and growth factor mobilization strategies with significantly reducing the mobilization failure rate in myeloma patients. The best strategy to mobilize progenitor cells with the highest yield and lowest toxicity and cost in patients with multiple myeloma has not yet been determined. This review aims to summarize the current status of art mobilization in myeloma comparing the pros and cons of different mobilization strategies. Copyright © 2017. Published by Elsevier Ltd.

  18. Current Status of the PIPER Experiment

    Science.gov (United States)

    Johnson, Bradley; Ade, P.; Benford, D.; Bennett, C.; Chuss, D.; Dotson, J.; Eimer, J.; Fixsen, D.; Halpern, M.; Hilton, G.; Hinderks, J.; Hinshaw, G.; Irwin, K.; Jethava, N.; Jhabvala, C.; Kogut, A.; Lazear, J.; Lowe, L.; Miller, T.; Mirel, P.; Moseley, H.; Rodriguez, S.; Rostem, K.; Sharp, E.; Staguhn, J.; Tucker, C.; Voellmer, G.; Wollack, E.; Zeng, L.

    2011-01-01

    The Primordial Inflation Polarization Explorer (PIPER) is a balloon-borne instrument to measure the polarization of the cosmic microwave background in search of the expected signature of primordial gravity waves excited during an inflationary epoch shortly after the Big Bang. PIPER consists of two co-aligned telescopes, one sensitive to the Q Stokes parameter and the other to U. Sky signals will be detected with 5120 transition edge sensor (TES) bolometers distributed in four rectangular close-packed arrays maintained at 100 mK. To maximize the sensitivity of the instrument, both telescopes are mounted within a single open bucket dewar and are maintained at 1.5 K throughout flight, with no ambient-temperature windows between the sky and the detectors. To mitigate the effects of systematic errors, the polarized sky signals will be modulated using a variable-delay polarization modulator. PIPER will observe at frequencies 200, 270, 350, and 600 GHz to separate the CMB from polarized dust emission within the Galaxy. A series of flights alternating between northern and southern hemisphere launch sites will produce nearly full-sky maps in Stokes I, Q, U, and V. I will discuss the current status and potential science returns from the PIPER project.

  19. Current status of GALS setup in JINR

    Energy Technology Data Exchange (ETDEWEB)

    Zemlyanoy, S., E-mail: zemlya@jinr.ru; Avvakumov, K., E-mail: kavvakumov@jinr.ru [Joint Institute for Nuclear Research, Flerov Laboratory of Nuclear Reactions (Russian Federation); Fedosseev, V. [CERN (Switzerland); Bark, R. [Nat. Research Foundation, iThemba LABS (South Africa); Blazczak, Z. [A. Mickiewicz University, Faculty of Physics (Poland); Janas, Z. [University of Warsaw, Faculty of Physics (Poland)

    2017-11-15

    This is a brief report on the current status of the new GAs cell based Laser ionization Setup (GALS) at the Flerov Laboratory for Nuclear Reactions (FLNR) of the Joint Institute for Nuclear Research (JINR) in Dubna. GALS will exploit available beams from the U-400M cyclotron in low energy multi-nucleon transfer reactions to study exotic neutron-rich nuclei located in the “north-east” region of nuclear map. Products from 4.5 to 9 MeV/nucleon heavy-ion collisions, such as {sup 136}Xe on {sup 208}Pb, are thermalized and neutralized in a high pressure gas cell and subsequently selectively laser re-ionized. In order to choose the best scheme of ion extraction the results of computer simulations of two different systems are presented. The first off- and online experiment will be performed on osmium atoms that is regarded as a most convenient element for producing isotopes with neutron number in the vicinity of the magic N = 126.

  20. Current status of mini-gastric bypass

    Directory of Open Access Journals (Sweden)

    Kamal K Mahawar

    2016-01-01

    Full Text Available Mini-gastric bypass (MGP is a promising bariatric procedure. Tens of thousands of this procedure have been performed throughout the world since Rutledge performed the first procedure in the United States of America in 1997. Several thousands of these have even been documented in the published scientific literature. Despite a proven track record over nearly two decades, this operation continues to polarise the bariatric community. A large number of surgeons across the world have strong objections to this procedure and do not perform it. The risk of symptomatic (bile reflux, marginal ulceration, severe malnutrition, and long-term risk of gastric and oesophageal cancers are some of the commonly voiced concerns. Despite these expressed fears, several advantages such as technical simplicity, shorter learning curve, ease of revision and reversal, non-inferior weight loss and comorbidity resolution outcomes have prompted some surgeons to advocate a wider adoption of this procedure. This review examines the current status of these controversial aspects in the light of the published academic literature in English.

  1. Current status and prospects of HIV treatment.

    Science.gov (United States)

    Cihlar, Tomas; Fordyce, Marshall

    2016-06-01

    Current antiviral treatments can reduce HIV-associated morbidity, prolong survival, and prevent HIV transmission. Combination antiretroviral therapy (cART) containing preferably three active drugs from two or more classes is required for durable virologic suppression. Regimen selection is based on virologic efficacy, potential for adverse effects, pill burden and dosing frequency, drug-drug interaction potential, resistance test results, comorbid conditions, social status, and cost. With prolonged virologic suppression, improved clinical outcomes, and longer survival, patients will be exposed to antiretroviral agents for decades. Therefore, maximizing the safety and tolerability of cART is a high priority. Emergence of resistance and/or lack of tolerability in individual patients require availability of a range of treatment options. Development of new drugs is focused on improving safety (e.g. tenofovir alafenamide) and/or resistance profile (e.g. doravirine) within the existing drug classes, combination therapies with improved adherence (e.g. single-tablet regimens), novel mechanisms of action (e.g. attachment inhibitors, maturation inhibitors, broadly neutralizing antibodies), and treatment simplification with infrequent dosing (e.g. long-acting injectables). In parallel with cART innovations, research and development efforts focused on agents that target persistent HIV reservoirs may lead to prolonged drug-free remission and HIV cure. Copyright © 2016 Gilead Sciences, Inc. Published by Elsevier B.V. All rights reserved.

  2. Radiopharmaceuticals in China. Current status and prospects

    Energy Technology Data Exchange (ETDEWEB)

    Jia, Hong-Mei; Liu, Bo-Li [Beijing Normal Univ. (China). Key Laboratory of Radiopharmaceuticals

    2014-04-01

    The review provides an overview of the current status of radiopharmaceuticals in China for in vivo clinical use and also describes some important advances in the past three decades. Development of the diagnostic and therapeutic radiopharmaceuticals as well as basic research on radiopharmaceutical chemistry are being introduced. The radiotracers developed in China include: (1) Brain perfusion imaging agents and CNS radiotracers for β-amyloid plaques, σ{sub 1} receptors, and dopamine D{sub 2} or D{sub 4} receptors; (2) {sup 99m}Tc- and {sup 18}F-labeled myocardial perfusion imaging agents; (3) tumor imaging agents including integrin-targeting radiotracer, novel sentinel lymph node imaging agents, hypoxia imaging agents, {sup 99m}Tc-labeled glucose derivatives, σ{sub 2} receptor imaging agents, folate receptor imaging agents, and potential radiotracers for imaging of human telomerase reverse transcriptase expression; (4) Potential infection imaging agents; (5) Potential asialoglycoprotein receptor imaging agents; (6) Other imaging agents. Moreover, some prospects of research and development of radiopharmaceuticals in the near future are discussed. (orig.)

  3. Current status of nuclear engineering education

    International Nuclear Information System (INIS)

    Palladino, N.J.

    1975-01-01

    The 65 colleges and universities offering undergraduate degrees in nuclear engineering and the 15 schools offering strong nuclear engineering options are, in general, doing a good job to meet the current spectrum of job opportunities. But, nuclear engineering programs are not producing enough graduates to meet growing demands. They currently receive little aid and support from their customers --industry and government--in the form of scholarships, grants, faculty research support, student thesis and project support, or student summer jobs. There is not enough interaction between industry and universities. Most nuclear engineering programs are geared too closely to the technology of the present family of reactors and too little to the future breeder reactors and controlled thermonuclear reactors. In addition, nuclear engineering programs attract too few women and members of minority ethnic groups. Further study of the reasons for this fact is needed so that effective corrective action can be taken. Faculty in nuclear engineering programs should assume greater initiative to provide attractive and objective nuclear energy electives for technical and nontechnical students in other disciplines to improve their technical understanding of the safety and environmental issues involved. More aggressive and persistent efforts must be made by nuclear engineering schools to obtain industry support and involvement in their programs

  4. Gyroscope technology, status and trends

    Science.gov (United States)

    Caspary, Wilhelm F.

    After a sketch of history of gyroscope technology, the dynamic law of a gyroscope and its specialization to the suspended gyrocompass are outlined. The equations of motion of a north-seeking gyro are reviewed forming the base for observation techniques. Following a state-of-the-art report, the relations between the observables and the final azimuth are fully discussed and actions and precautions required for precise results are proposed. With modern instruments and observation methods it is presently possible to determine an azimuth with a standard deviation of 3 to 6 within less than one hour. The principles of non-rotating optical gyroscopes are presented and their potential as alternatives to conventional instruments is discussed.

  5. On the current status of Phakopsora pachyrhizi genome sequencing.

    Science.gov (United States)

    Loehrer, Marco; Vogel, Alexander; Huettel, Bruno; Reinhardt, Richard; Benes, Vladimir; Duplessis, Sébastien; Usadel, Björn; Schaffrath, Ulrich

    2014-01-01

    Recent advances in the field of sequencing technologies and bioinformatics allow a more rapid access to genomes of non-model organisms at sinking costs. Accordingly, draft genomes of several economically important cereal rust fungi have been released in the last 3 years. Aside from the very recent flax rust and poplar rust draft assemblies there are no genomic data available for other dicot-infecting rust fungi. In this article we outline rust fungus sequencing efforts and comment on the current status of Phakopsora pachyrhizi (Asian soybean rust) genome sequencing.

  6. Current status of RCA projects and strategies for future implementation

    International Nuclear Information System (INIS)

    Kim, Kyoung Pyo; Lee, Jeong Kong

    1998-12-01

    This report is intended to provide basic overall information about ways to promote technical cooperation within the framework of RCA to accelerate and coordinate cooperative activities in nuclear science and technology in Asia and the Pacific region through a thorough review on the current status and through suggesting future implementation strategies. The contents of this report include an overall introduction of RCA, guidelines and operating rules for RCA programmes, current status and future plans for RCA projects as well as the RCA vision for the next 25 years. By reviewing the current status and future implementation strategies for RCA projects, it will help to set up a national nuclear policy aimed at seeking maximum benefits from participation in RCA projects and to implement programmes for nuclear cooperation with Asian-Pacific countries. It is expected that as a lead country for the energy sector, which is one of five thematic areas for the year 1999 - 2000 cycle programmes, Korea will continue to make significant contributions towards the implementation of RCA programmes in the future. With this report, we plan to keep up with future developments as well as implement an effective cooperation with the countries in the region so that the opinion of Korea, one of the nuclear advanced countries in the region, can be fully reflected in the establishment of future plans for RCA programmes. (author). 3 refs., 5 tabs., 1 fig

  7. Status of Irradiation technology development in JMTR

    International Nuclear Information System (INIS)

    Inaba, Y.; Inoue, S.; Izumo, H.; Kitagishi, S.; Tsuchiya, K.; Saito, T.; Ishitsuka, E.

    2008-01-01

    Irradiation Engineering Section of the Neutron Irradiation and Testing Reactor Center was organized to development the new irradiation technology for the application at JMTR re operation. The new irradiation engineering building was remodeled from the old RI development building, and was started to use from the end of September, 2008. Advanced in situ instrumentation technology (high temperature multi paired thermocouple, ceramic sensor, application of optical measurement), 99M o production technology by new Mo solution irradiation method, recycling technology on used beryllium reflector, and so on are planned as the development of new irradiation technologies. The development will be also important for the education and training programs through the development of young generation in not only Japan but also Asian counties. In this report, as the status of the development the new irradiation technology, new irradiation engineering building, high temperature multi paired thermocouple, experiences of optical measurement, recycling technology on used beryllium reflector are introduced

  8. Status of irradiation technology development in JMTR

    International Nuclear Information System (INIS)

    Inaba, Y.; Inoue, S.; Izumo, H.; Kitagishi, S.; Tsuchiya, K.; Saito, T.; Ishitsuka, E.

    2008-01-01

    Irradiation Engineering Section of the Neutron Irradiation and Testing Reactor Centre was organised to development the new irradiation technology for the application at JMTR re-operation. The new irradiation engineering building was remoulded from the old RI development building, and was started to use from the end of September, 2008. Advanced in-situ instrumentation technology(high temperature multi-paired thermocouple, ceramic sensor,application of optical measurement), 99 Mo production technology by new Mo solution irradiation method,recycling technology on used beryllium reflector, and so on are planned as the development of new irradiation technologies. The development will be also important for the education and training programs through the development of young generation in not only Japan but also Asian countries. In this report, as the status of the development the new irradiation technology, new irradiation engineering building, high temperature multi-paired thermocouple, experiences of optical measurement, recycling technology on used beryllium reflector are introduced

  9. Marine current energy devices: Current status and possible future applications in Ireland

    Energy Technology Data Exchange (ETDEWEB)

    Rourke, Fergal O.; Boyle, Fergal; Reynolds, Anthony [Department of Mechanical Engineering, Dublin Institute of Technology, Bolton Street, Dublin 1 (Ireland)

    2010-04-15

    There is a growing demand for the use of renewable energy technologies to generate electricity due to concerns over climate change. The oceans provide a huge potential resource of energy. Energy extraction using marine current energy devices (MCEDs) offers a sustainable alternative to conventional sources and a predictable alternative to other renewable energy technologies. A MCED utilises the kinetic energy of the tides as opposed to the potential energy which is utilised by a tidal barrage. Over the past decade MCEDs have become an increasingly popular method of energy extraction. However, marine current energy technology is still not economically viable on a large scale due to its current stage of development. Ireland has an excellent marine current energy resource as it is an island nation and experiences excellent marine current flows. This paper reviews marine current energy devices, including a detailed up-to-date description of the current status of development. Issues such as network integration, economics, and environmental implications are addressed as well as the application and costs of MCEDs in Ireland. (author)

  10. Current status of JMTR refurbishment project

    International Nuclear Information System (INIS)

    Kaminaga, Masanori; Niimi, Motoji; Hori, Naohiko; Takahashi, Kunihiro; Kanno, Masaru; Nakagawa, Tetsuya; Nagao, Yoshiharu; Ishihara, Masahiro; Kawamura, Hiroshi

    2010-02-01

    The JMTR is a light water moderated and cooled, beryllium reflected tank- type reactor using LUE silicide plate-type fuels. Its thermal power is 50 MW, maximum thermal and fast neutron flux is 4x10 18 m -2 s -1 . First criticality was achieved in March 1968, and its operation was stopped from August, 2006 for the refurbishment. The refurbishment is scheduled from the beginning of FY2007 to the end of FY2010. The renewed and upgraded JMTR will be re-started from FY2011. An investigation on aged components (aged-investigation) was carried out for concrete structures of the JMTR reactor building, exhaust stack, etc., and for tanks in the primary cooling system, heat exchangers, pipes in the secondary cooling system, cooling tower, emergency generators and so on, in order to identify their integrity. The aged-investigation was carried out at the beginning of FY2007. As a result, some components were decided to replace from viewpoints of future maintenance and improvement of reliability, and some components or structures were decided to repair. A visual inspection of inner side of the pressure vessel was carried out using an underwater camera in FY2008, and no serious damage was observed. Up to now, refurbishment works are in progress according to the planned schedule. In FY2009, motors of primary cooling pumps, secondary cooling pumps, motors of drain pumps, pump in the primary water transfer line to the water purification system, beryllium reflector frame, low-voltage motor control centers are to be replaced. A nuclear instrumentation system, process control system, safety protection system and so on are to be replaced in FY2010. In this paper, current status of JMTR refurbishment project is presented. (author)

  11. Molecular imaging: current status and emerging strategies

    International Nuclear Information System (INIS)

    Pysz, M.A.; Gambhir, S.S.; Willmann, J.K.

    2010-01-01

    In vivo molecular imaging has a great potential to impact medicine by detecting diseases in early stages (screening), identifying extent of disease, selecting disease- and patient-specific treatment (personalized medicine), applying a directed or targeted therapy, and measuring molecular-specific effects of treatment. Current clinical molecular imaging approaches primarily use positron-emission tomography (PET) or single photon-emission computed tomography (SPECT)-based techniques. In ongoing preclinical research, novel molecular targets of different diseases are identified and, sophisticated and multifunctional contrast agents for imaging these molecular targets are developed along with new technologies and instrumentation for multi-modality molecular imaging. Contrast-enhanced molecular ultrasound (US) with molecularly-targeted contrast microbubbles is explored as a clinically translatable molecular imaging strategy for screening, diagnosing, and monitoring diseases at the molecular level. Optical imaging with fluorescent molecular probes and US imaging with molecularly-targeted microbubbles are attractive strategies as they provide real-time imaging, are relatively inexpensive, produce images with high spatial resolution, and do not involve exposure to ionizing irradiation. Raman spectroscopy/microscopy has emerged as a molecular optical imaging strategy for ultrasensitive detection of multiple biomolecules/biochemicals with both in vivo and ex vivo versatility. Photoacoustic imaging is a hybrid of optical and US techniques involving optically-excitable molecularly-targeted contrast agents and quantitative detection of resulting oscillatory contrast agent movement with US. Current preclinical findings and advances in instrumentation, such as endoscopes and microcatheters, suggest that these molecular imaging methods have numerous potential clinical applications and will be translated into clinical use in the near future.

  12. Current status of the RERTR program

    International Nuclear Information System (INIS)

    Travelli, Armando

    1983-01-01

    The main purpose of this paper is to review the progress which has been accomplished by the RERTR Program during the past year, the present status of the program, the activities which are now in progress, and the program plans for the coming years. The main program objectives have not changed during the past year. The primary goal of the RERTR Program is still to reduce the amount of HEU which is shipped and used around the world in research reactors and, with it, the nuclear proliferation potential which it creates. Also unchanged is the program objective to reduce HEU use without significant penalty to the reactors involved. This means that for every possible conversion, our technical goal is to achieve good experiment capabilities and the economic advantages that come from a long core lifetime and from relatively economical fuels. We also intend to limit as much as possible the modifications which may have to be made to the reactor in order to achieve conversion and, last but not least, we intend to avoid any significant problems that might appear in the safety and licensing areas. Other important goals are the sharing of information about reduced-enrichment technology and providing technical assistance to the U.S. Government on special problems that may affect implementation of its policies. The timetable of the RERTR Program has stretched slightly. At the time of the previous ANL Conference, a long range goal was set which was anticipated to require about five or six years. This happened in 1978 and, therefore, the long range goal was considered to be achievable by 1984. This final deadline, the time when the long term goal of technical convertibility of all research reactors can be achieved, has now been moved to 1986. In the meantime, good progress has been made towards the near-term goals. Much more detailed knowledge is available about what lies ahead from a technical point of view. In addition, the general level of confidence in the achievability of the

  13. Current status of the TSensor systems roadmap

    NARCIS (Netherlands)

    Walsh, Steven Thomas; Bryzek, Janusz; Pisano, Albert P.

    2014-01-01

    We apply our work from the contemporary pharmaceutical industry to generate a third generation-style technology roadmap for TSensor Systems. First we identify drivers and consortia. We then identify relevant technology components, namely multiple root technologies, multiple unit cells, multiple

  14. Current status of nuclear physics research

    Energy Technology Data Exchange (ETDEWEB)

    Bertulani, Carlos A. [Department of Physics and Astronomy, Texas A and M University-Commerce (United States); Hussein, Mahir S., E-mail: hussein@if.usp.br [Instituto Tecnologico de Aeronautica (ITA), Sao Jose dos Campos, SP (Brazil). Dept. de Fisica

    2015-12-15

    In this review, we discuss the current status of research in nuclear physics which is being carried out in different centers in the world. For this purpose, we supply a short account of the development in the area which evolved over the last nine decades, since the discovery of the neutron. The evolution of the physics of the atomic nucleus went through many stages as more data became available. We briefly discuss models introduced to discern the physics behind the experimental discoveries, such as the shell model, the collective model, the statistical model, the interacting boson model, etc., some of these models may be seemingly in conflict with each other, but this was shown to be only apparent. The richness of the ideas and abundance of theoretical models attests to the important fact that the nucleus is a really singular system in the sense that it evolves from two-body bound states such as the deuteron, to few-body bound states, such as {sup 4}He, {sup 7}Li, {sup 9}Be, etc. and up the ladder to heavier bound nuclei containing up to more than 200 nucleons. Clearly, statistical mechanics, usually employed in systems with very large number of particles, would seemingly not work for such finite systems as the nuclei, neither do other theories which are applicable to condensed matter. The richness of nuclear physics stems from these restrictions. New theories and models are presently being developed. Theories of the structure and reactions of neutron-rich and proton-rich nuclei, called exotic nuclei, halo nuclei, or Borromean nuclei, deal with the wealth of experimental data that became available in the last 35 years. Furthermore, nuclear astrophysics and stellar and Big Bang nucleosynthesis have become a more mature subject. Due to limited space, this review only covers a few selected topics, mainly those with which the authors have worked on. Our aimed potential readers of this review are nuclear physicists and physicists in other areas, as well as graduate

  15. Educational Technology: Effective Leadership and Current Initiatives

    Science.gov (United States)

    Courville, Keith

    2011-01-01

    (Purpose) This article describes the basis for effective educational technology leadership and a few of the current initiatives and impacts that are a result of the aforementioned effective leadership. (Findings) Topics addressed in this paper include: (1) the role of the educational technology leader in an educational setting; (2) an examination…

  16. Current status of the TSensor systems roadmap

    OpenAIRE

    Walsh, Steven Thomas; Bryzek, Janusz; Pisano, Albert P.

    2014-01-01

    We apply our work from the contemporary pharmaceutical industry to generate a third generation-style technology roadmap for TSensor Systems. First we identify drivers and consortia. We then identify relevant technology components, namely multiple root technologies, multiple unit cells, multiple critical dimensions, strict boundary conditions constraining innovations and products, a heightened importance of drivers, and a more prominent role for consortia. These components include chips and na...

  17. Current status and future perspective of PET

    International Nuclear Information System (INIS)

    Lee, Myung Chul

    2002-01-01

    Positron Emission Tomography (PET) is a nuclear medicine imaging modality that consists of systemic administration to a subject of a radiopharmaceutical labeled with a positron-emitting radionuclide. Following administration, its distribution in the organ or structure under study can be assessed as a function of time and space by (1) detecting the annihilation radiation resulting from the interaction of the positrons with matter, and (2) reconstructing the distribution of the radioactivity from a series of that used in computed tomography (CT). The nuclides most generally exhibit chemical properties that render them particularly desirable in physiological studies. The radionuclides most widely used in PET are F-18, C-11, O-15 and N-13. Regarding to the number of the current PET Centers worldwide (based on ICP data), more than 300 PET Centers were in operation in 2000. The use of PET technology grew rapidly compared to that in 1992 and 1996, particularly in the USA, which demonstrates a three-fold rise in PET installations. In 2001, 194 PET Centers were operating in the USA. In 1994, two clinical and research-oriented PET Centers at Seoul National University Hospital and Samsung Medical Center, was established as the first dedicated PET and Cyclotron machines in Korea, followed by two more PET facilities at the Korea Cancer Center Hospital, Ajou Medical Center, Yonsei University Medical Center, National Cancer Center and established their PET Center. Catholic Medical School and Pusan National University Hospital have finalized a plan to install PET machine in 2002, which results in total of nine PET Centers in Korea. Considering annual trends of PET application in four major PET centers in Korea in Asan Medical Center recent six years (from 1995 to 2000), a total of 11,564 patients have been studied every year and the number of PET studies has shown steep growth year upon year. We had, 1,020 PET patients in 1995. This number increased to 1,196, 1,756, 2,379, 3

  18. Current status of FBR development in Japan

    International Nuclear Information System (INIS)

    Ichimiya, Masakazu

    2008-01-01

    'Fast Reactor Cycle Technology Development (FaCT)' project has been conducted since 2006. In this project, design study and research and development (R and D) on innovative technologies for fast reactor (FR) cycle system are implemented in order to present the conceptual designs of commercial and demonstration facilities by 2015 and start operating demonstration fast reactor in 2025. The R and Ds has been stepped forward into the development stage to establish the realization of innovative technologies which bring excellent performance to fast reactor cycle system. The purpose of R and D by 2010 is to decide whether innovative technologies shall be adopted. In the FaCT project, R and D stage for the realization of innovative technologies, it is important to take full advantage of JAEA's R and D facilities toward demonstration and commercialization stages. Particularly, it is indispensible for the realization of innovative technologies to develop the fuel and material by irradiation tests using an experimental reactor 'Joyo', to verify the reliability for power-generating plant through the experience of operation and maintenance, and to establish technologies of operation, maintenance and repair for the plant with a prototype reactor 'Monju'. Several possible R and D have been effectively carried out within the frameworks of international cooperation, such as Global Nuclear Energy Partnership (GNEP), Generation IV International Forum (GIF), and International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). (author)

  19. Current Status of Pyroprocessing Development at KAERI

    Directory of Open Access Journals (Sweden)

    Hansoo Lee

    2013-01-01

    Full Text Available Pyroprocessing technology has been actively developed at Korea Atomic Energy Research Institute (KAERI to meet the necessity of addressing spent fuel management issue. This technology has advantages over aqueous process such as less proliferation risk, treatment of spent fuel with relatively high heat and radioactivity, and compact equipments. This paper describes the pyroprocessing technology development at KAERI from head-end process to waste treatment. The unit process with various scales has been tested to produce the design data associated with scale-up. Pyroprocess integrated inactive demonstration facility (PRIDE was constructed at KAERI and it began test operation in 2012. The purpose of PRIDE is to test the process regarding unit process performance, remote operation of equipments, integration of unit processes, scale-up of process, process monitoring, argon environment system operation, and safeguards-related activities. The test of PRIDE will be promising for further pyroprocessing technology development.

  20. Ceramic materials for SOFCs: Current status

    Directory of Open Access Journals (Sweden)

    Kozhukharov, V.

    2002-10-01

    Full Text Available It is well known that the main parts of Solid Oxide Fuel Cells (SOFCs are build from ceramic materials. Namely the ceramic materials and composites, used for SOFCs manufacturing, are objects of the overview in the present work. The analysis carried out covers the last current publications in the field discussed. Special attention and examination in details have been done on patents state-of-the-art. After a background and short classification of the ceramic SOFCs materials the attention is focused on cathode, electrolyte, anode, interconnection and sealing materials. Their requirements, structure, thermal stability, composition control and behavior, processing and performance are the object of overview. A correlation has been made between the phase diagrams oxygen incorporation and transport, and SOFC advantages, generally for materials of lanthanum- base perovskite family. In order to analyze the innovative investigations regarding the patent branch of the SOFCs development and application, an object of review was patents from Japan, USA, Germany and European Union. Some examples of the inventions with accent on the ceramic materials are shown. In addition the tendency regarding R & D activities of SOFCs development materials from the leading companies in the world is analyzed. On the base of the most important technological and economical parameters of cell cathode/electrolyte/anode materials an attempt for evaluation and correlation has been made and innovative conceptions are shown.

    Es bien sabido que los componentes principales de las celdas de combustible de óxido sólido (SOFCs estan constituidos por materiales cerámicos. Dichos materiales cerámicos y materiales compuestos que se utilizan en la fabricación de SOFCs son objeto de estudio en el presente trabajo. El análisis llevado a cabo incluye la revisión de las últimas publicaciones en la materia, con una especial atención y examen minucioso sobre las patentes m

  1. Women in Science : Current Status & Proposal

    Indian Academy of Sciences (India)

    ranjeetha

    Female Members in KAST. The Korean Academy of Science and Technology. Women. 2013 i. i i A i. Field. Women. Member. Science. 139. Year. Women. Member. Policy. Research. Science. Medicine. Pharmacy. Agriculture. Fisheries. 2002. 8. 1. 3. 4. Engineering. 146. Agriculture. Fisheries. 72. 2003. 8. 1. 3. 4. 2004. 9. 1.

  2. Current Abstracts Nuclear Reactors and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Bales, J.D.; Hicks, S.C. [eds.

    1993-01-01

    This publication Nuclear Reactors and Technology (NRT) announces on a monthly basis the current worldwide information available from the open literature on nuclear reactors and technology, including all aspects of power reactors, components and accessories, fuel elements, control systems, and materials. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency`s Energy Technology Data Exchange or government-to-government agreements. The digests in NRT and other citations to information on nuclear reactors back to 1948 are available for online searching and retrieval on the Energy Science and Technology Database and Nuclear Science Abstracts (NSA) database. Current information, added daily to the Energy Science and Technology Database, is available to DOE and its contractors through the DOE Integrated Technical Information System. Customized profiles can be developed to provide current information to meet each user`s needs.

  3. Spent fuel management: Current status and prospects

    International Nuclear Information System (INIS)

    1988-12-01

    The main objective of the Advisory Group on Spent Fuel Management is to review the world-wide situation in Spent Fuel Management, to define the most important directions of national efforts and international cooperation in this area, to exchange information on the present status and progress in performing the back-end of Nuclear Fuel Cycle and to elaborate the general recommendations for future Agency programmes in the field of spent fuel management. This report which is a result of the third IAEA Advisory Group Meeting (the first and second were held in 1984 and 1986) is intended to provide the reader with an overview of the status of spent fuel management programmes in a number of leading countries, with a description of the past and present IAEA activities in this field of Nuclear Fuel Cycle and with the Agency's plans for the next years, based on the proposals and recommendations of Member States. A separate abstract was prepared for each of 14 papers presented at the advisory group meeting. Refs, figs and tabs

  4. Current status of schistosomiasis in Sokoto, Nigeria

    Directory of Open Access Journals (Sweden)

    Kiran Singh

    2016-09-01

    Full Text Available The study was conducted in poor communities, where most of the population is dependent on river and well for their everyday activities. In this study 5 years–15 years aged children were sampled for schistosomiasis (Urinary and intestinal, using of urine and stool samples. The stool samples were analyzed using kato-katz thick faecal smear technique while the urine samples were analyzed by filtration technique. The overall prevalence of urinary schistosomiasis (Schistosoma haematobium was 60.8% (228 positive cases in 375 samples, and for intestinal schistosomiasis (Schistosoma mansoni was 2.93% (11 positive in 375 samples. The order of infection based on social status (occupation of pupil's parents was farmers > fishermen > traders > civil servents > others. The prevalence of infection based on pupil's water contact activities such as farming associated 84.87% urinary schistosomiasis, followed by swimming (78.21%. Occurrence of urinary schistosomiasis based on source of pupil's drinking water; highest infection was reported among those that drink dam water (75.24% while least infection was occurred whose drinking water was from bore-whole (17.64%. Prevalence of urinary schistosomiasis in the studied area is therefore very high and family status, means of water contact and availability of drinking water dependent. Therefore there is urgent need to adapt preventive measures, provision of safe drinking water as well as control programmes for vector snails, immediately.

  5. Radiation Effects on Current Field Programmable Technologies

    Science.gov (United States)

    Katz, R.; LaBel, K.; Wang, J. J.; Cronquist, B.; Koga, R.; Penzin, S.; Swift, G.

    1997-01-01

    Manufacturers of field programmable gate arrays (FPGAS) take different technological and architectural approaches that directly affect radiation performance. Similar y technological and architectural features are used in related technologies such as programmable substrates and quick-turn application specific integrated circuits (ASICs). After analyzing current technologies and architectures and their radiation-effects implications, this paper includes extensive test data quantifying various devices total dose and single event susceptibilities, including performance degradation effects and temporary or permanent re-configuration faults. Test results will concentrate on recent technologies being used in space flight electronic systems and those being developed for use in the near term. This paper will provide the first extensive study of various configuration memories used in programmable devices. Radiation performance limits and their impacts will be discussed for each design. In addition, the interplay between device scaling, process, bias voltage, design, and architecture will be explored. Lastly, areas of ongoing research will be discussed.

  6. Current status of the PIK Reactor

    International Nuclear Information System (INIS)

    Konoplev, K.A.

    1999-01-01

    At the end of 1998 the heads of the Russian Academy of Science, the Ministry of Science and Technology and the Ministry of Atomic Energy (the bodies involved in the research work with neutrons) declared the PIK-project as one of the objects of the first priority. They set a task to put it into operation in the next 3-4 years and to organize on its base an international center of neutron research. Realization of this task will depend on the real financing. In the last months there was a remarkable impulse in the construction work. In the frame of ISTC Project 321-96 Petersburg Nuclear Physics Institute and Research Institute of Technology developed functional training simulator (FTSC) for Reactor PIK. The utilization of FTSC for reactor PIK design examination began. (author)

  7. Status of Nozzle Aerodynamic Technology at MSFC

    Science.gov (United States)

    Ruf, Joseph H.; McDaniels, David M.; Smith, Bud; Owens, Zachary

    2002-01-01

    This viewgraph presentation provides information on the status of nozzle aerodynamic technology at MSFC (Marshall Space Flight Center). The objectives of this presentation were to provide insight into MSFC in-house nozzle aerodynamic technology, design, analysis, and testing. Under CDDF (Center Director's Discretionary Fund), 'Altitude Compensating Nozzle Technology', are the following tasks: Development of in-house ACN (Altitude Compensating Nozzle) aerodynamic design capability; Building in-house experience for all aspects of ACN via End-to-End Nozzle Test Program; Obtaining Experimental Data for Annular Aerospike: Thrust eta, TVC (thrust vector control) capability and surface pressures. To support selection/optimization of future Launch Vehicle propulsion we needed a parametric design and performance tool for ACN. We chose to start with the ACN Aerospike Nozzles.

  8. Ventilator-associated pneumonia: current status and future recommendations.

    Science.gov (United States)

    Efrati, Shai; Deutsch, Israel; Antonelli, Massimo; Hockey, Peter M; Rozenblum, Ronen; Gurman, Gabriel M

    2010-04-01

    Ventilator-associated pneumonia (VAP) is a common hazardous complication in ICU patients. The aim of the current review is to give an update on the current status and future recommendations for VAP prevention. This article gives an updated review of the current literature on VAP. The first part briefly reviews pathogenesis and epidemiology while the second includes an in-depth review of evidence-based practice guidelines (EBPG) and new technologies developed for prevention of VAP. VAP remains a frequent and costly complication of critical illness with a pooled relative risk of 9-27% and mortality of 25-50%. Strikingly, VAP adds an estimated cost of more than $40,000 to a typical hospital admission. An important aetiological mechanism of VAP is gross or micro-aspiration of oropharyngeal organisms around the cuff of the endotracheal tube (ETT) into the distal bronchi. Prevention of VAP is preferable. Preventative measures can be divided into two main groups: the implemen- tation of EBPGs and use of device-based technologies. EBPGs have been authored jointly by the American Thoracic Society and the Infectious Diseases Society of America. The Canadian Critical Care Trials group also published VAP Guidelines in 2008. Their recommendations are detailed in this review. The current device-based technologies include drainage of subglottic secretions, silver coated ETTs aiming to influence the internal bio-layer of the ETT, better sealing of the lower airways with ultrathin cuffs and loops for optimal cuff pressure control. EBPG consensus includes: elevation of the head of the bed, use of daily "sedation vacations" and decontamination of the oropharynx. Technological solutions should aim to use the most comprehensive combination of subglottic suction of secretions, optimization of ETT cuff pressure and ultrathin cuffs. VAP is a type of hospital-acquired pneumonia that develops more than 48 h after endotracheal intubation. Its incidence is estimated to be 9-27%, with a

  9. Current Status of Astrophysics of Cosmic Rays

    Science.gov (United States)

    Moskalenko, Igor

    2016-03-01

    I will review the current instrumentation and recent results. I will discuss which measurements have to be done in the near future to significantly advance our knowledge about the phenomenon of cosmic rays, their sources, and their interactions with the interstellar medium. A support from NASA APRA Grant No. NNX13AC47G is greatly acknowledged.

  10. Current status of HTTR project at JAERI

    International Nuclear Information System (INIS)

    Saito, Shinzo; Sudo, Yukio; Tanaka, Toshiyuki; Baba, Osamu

    1992-01-01

    The HTTR is a high temperature gas cooled test reactor with thermal output of 30 MW, outlet coolant temperatures of 850degC at rated operation and 950degC at high temperature test operation and primary coolant pressure of 4 MPa. The HTTR consists of a reactor pressure vessel with a prismatic core in it, a primary cooling loop with an intermediate helium-helium heat exchanger and a pressurized water cooler in parallel, an auxiliary cooling system, a reactor vessel cooling system and related components. The HTTR is utilized for establishing and upgrading the technology bases for advanced HTGRs including irradiation tests for fuels and materials, safety demonstration tests for HTGRs and nuclear heat application and for carrying out various kinds of innovative basic researches on high temperature technologies. Since 1969, the JAERI has carried out research and development works on block type fuel, high temperature materials, high temperature in-core instrumentations, high temperature components, reactor physics, heat transfer and fluid dynamics, plate-out of fission products etc., in order to construct the HTTR which can supply high temperature coolant of 950degC to the outside of the pressure vessel for the nuclear heat application, for the first time in the world. In November 1990, the installation permit was issued by the Government through about 20 month safety review by the Science and Technology Agency and Nuclear Safety Commission. The construction of the HTTR facility was initiated on the site in the Oarai Research Establishment, JAERI in March 1991. The excavation of ground is now finished at the HTTR site. It will take about six years for the completion of the HTTR facility and the first criticality will be attained in 1996. (author)

  11. Current status of nucleonic gauges in Portugal

    International Nuclear Information System (INIS)

    Salgado, J.; Carvalho, F.G.; Manteigas, J.; Oliveira, C.; Goncalves, I.F.; Neves, J.; Cruz, C.

    2000-01-01

    The nucleonic gauges are largely used in Portugal industry, despite the fact that design and manufacturing of prototypes of nucleonic gauges is rather limited. The modernization of some industrial sectors (cement, paper and civil engineering) has enhanced applications of nucleonic gauges and has created local capability but new legislation tends to restrict further spread of them. The Institute of Nuclear Technology is the only applied research institution developing nucleonic gauges for moisture, thickness and density, and elemental analysis, as well as providing assistance in calibration, safe operation and maintenance of them. (author)

  12. Current Developments in DETER Cybersecurity Testbed Technology

    Science.gov (United States)

    2015-12-08

    1 Current Developments in DETER Cybersecurity Testbed Technology Terry Benzel1*, Bob Braden*, Ted Faber*, Jelena Mirkovic*, Steve Schwab...fundamentally transformational cybersecurity research methodologies. This paper discusses underlying rationale, together with initial design and...implementation, of key technical concepts that drive these transformations. 1. Introduction The DETER cybersecurity testbed [3] is a dedicated

  13. Stereotactic radiosurgery: basic concepts and current status

    International Nuclear Information System (INIS)

    Gaur, Maheep Singh

    2016-01-01

    Term Stereotactic Radiosurgery was coined by Prof Lars Leksell in 1951 as concept. Leksell's experimented together with the radiobiologist Borje Larsson in Uppsala, on trying to develop 'stereotactic radiosurgery', aimed at lesioning in the central brain in functional operations such as thalamotomy and capsulotomy. Clinical experiments using a proton beam were initiated at the Gustav Werner Institute in Uppsala, and a few patients had been treated. Experiences from these led Leksell to design a multi-source 'beam knife', which became ready for use in 1967 as the first 'Gamma Knife' and installed at the private hospital Sophiahammet in Stockholm as a clinical research unit. Moving from functional neurosurgery today Gamma knife is used for a wide range on brain tumors, vascular malformations and functional disorders. Introduction of newer technology in navigation and radiation delivery has made it possible to do whole body Radiosurgery. Various technologies, basic principles, radiobiological aspects and applications will be discussed. (author)

  14. The current status of grazing incidence optics

    International Nuclear Information System (INIS)

    Aschenbach, B.

    1983-01-01

    The developments in the area of grazing incidence optics with emphasis on telescopes for use in X-ray astronomy are reviewed. The performance of existing high-resolution telescopes is outlined and compared with those expected from future missions like ROSAT and AXAF. Starting from the basic principles of X-ray reflection and scattering, an attempt is made to highlight the current understanding of X-ray mirror physics using new theoretical ideas as well as experimental laboratory results. (author)

  15. State Emergency Department Opioid Guidelines: Current Status.

    Science.gov (United States)

    Broida, Robert I; Gronowski, Tanner; Kalnow, Andrew F; Little, Andrew G; Lloyd, Christopher M

    2017-04-01

    The purpose of this study was to evaluate and categorize current state-sponsored opioid guidelines for the practice of emergency medicine (EM). We conducted a comprehensive search of EM-specific opioid prescribing guidelines and/or policies in each state to determine current state involvement in EM opioid prescribing, as well as to evaluate some of the specifics of each guideline or policy. The search was conducted using an online query and a follow-up email request to each state chapter of ACEP. We found that 17 states had emergency department-specific guidelines. We further organized the guidelines into four categories: limiting prescriptions for opioids with 67 total recommendations; preventing/diverting abuse with 56 total recommendations; addiction-related guidelines with 29 total recommendations; and a community resources section with 24 total recommendations. Our results showed that current state guidelines focus on providers limiting opioid pain prescriptions and vetting patients for possible abuse/diversion. This study highlights the 17 states that have addressed opioid prescribing guidelines and categorizes their efforts to date. It is hoped that this study will provide the basis for similar efforts in other states.

  16. Supersymmetry: Current status and future prospects

    Energy Technology Data Exchange (ETDEWEB)

    Baer, H. (Florida State Univ., Tallahassee, FL (USA). Dept. of Physics); White, A. (Florida Univ., Gainesville, FL (USA). Dept. of Physics); Amos, N.; Beretvas, A. (Fermi National Accelerator Lab., Batavia, IL (USA)); Barnett, R.M. (Lawrence Berkeley Lab., CA (USA)); Bhattacharya, G. (Wisconsin Univ., Madison, WI (USA). Dept. of Physics); De, K. (Michigan Univ., Ann Arbor, MI (USA). Dept. of Physi

    1990-11-01

    We review the most recent data from e{sup +}e{sup {minus}} and p{bar p} colliders and discuss the resulting constraints on the parameters of the Minimal Supersymmetric Standard Model, and their implications for future supersymmetry searches. We review the patterns of cascade decays of squarks and gluinos and discuss the present status of supersymmetry event generators for hadron colliders. We present the results of detailed simulations of E{sub T} and same sign dilepton events from supersymmetry at the Tevatron. Although the E{sub T} signal continues to be viable, it is concluded that the same sign dilepton signal may be too small unless squarks and gluinos are approximately degenerate. The E{sub T} and the same-sign dilepton signals from supersymmetry and the Standard Model backgrounds at the SSC are also discussed in detail. We also discuss other promising ways of searching for supersymmetry at the SSC including events containing Z{degree} bosons, and events containing n isolated leptons (n {ge} 3). Finally, we discuss how supersymmetry searches might be modified if the Higgs sectors is more complicated or if R-parity is not conserved due to baryon number violating interactions. 49 refs., 12 figs.

  17. SOFIA: Science Vision and Current Status

    Science.gov (United States)

    Horner, Scott D.

    2010-01-01

    This slide presentation details the science and status of the Stratospheric Observatory for Infrared Astronomy (SOFIA). SOFIA is a 2.5 m Telescope designed to fit into a modified Boeing 747SP aircraft. It will have imaging and spectroscopy from .03 micron to 1.6 mm, emphasizing the obscured infrared spectrum (i.e., 30-300 micron). It will fly between 39,000 to 45,000 feet, above over 99.8 % of the water vapor which obscures the infrared from other ground based telescopes. Since it is on a ground based airplane, the instrumentation can be interchangeable between flights, it can fly anywhere and anytime. Diagrams show an overview of the observatory, the optical layout, and a comparison of SOFIA with the other major IR Imaging spectroscopic Space Observatories. Pictures include a shot of the installation of the primary mirror, and the Telescope instrument interface. Charts show the first generation instruments, and their ranges of spectral observation. Also the presentation reviews the science questions that SOFIA's instruments will assist in reviewing.

  18. Nuclear regulations: current status and proposed initiatives

    International Nuclear Information System (INIS)

    Domondon, D.B.; Valdezco, E.M.; Mateo, A.J.; Parami, V.K.

    1996-01-01

    The science Act of 1958 created the Philippine Atomic Energy Commission, presently known as the Philippine Nuclear Research Institute (PNRI), under the Department of Science and Technology (DOST). The PNRI is tasked with the dual role of promotion and control of the peaceful applications of atomic energy. To carry its mandate of regulation and control on the use of raioisotopes in various fields, the PNRI had promulgated and issued specific regulations known as the Code of PNRI regulations. This paper summarizes the activities undertaken by PNRI in the continuing process of review and subsequent revisions of the Code of PNRI regulations and related guidance documents. It highlights proposed modifications in the present regulations in an attempt to adopt the new international basic safety standards, the practical problems and related issues attendant to the implementation of these new standards, among others. In line with the overall objective of PNRI to ensure the safe application of nuclear energy and radiation technology in various fields, the institute conducted a series of regulatory information conferences to provide an opportunity for members of the regulatory staff of the PNRI and licenses to discuss safety initiatives and regulatory issues. This paper will also provide an in-depth assessment of the lessons learned from these conferences which were conducted by sector or by specific applications for a more focused approach, e.g. radiopharmaceuticals, industrial radiography, research, among others. Licensees' feedback on the PNRI regulatory process are presented as part of the overall objective of enhancing the operational experiences of the licensing, review and evaluation group as well as that of inspection, enforcement and compliance. Several proposed initiatives for consideration of the PNRI to further strengthen its regulatory functions are also briefly outlined. (author)

  19. The history and current status of glyphosate.

    Science.gov (United States)

    Duke, Stephen O

    2018-05-01

    Glyphosate is the only herbicide to target the enzyme 5-enolpyruvyl-3-shikimate phosphate synthase (EPSPS). It is a high use rate, non-selective herbicide that translocates primarily to metabolic sinks, killing meristematic tissues away from the application site. Its phloem-mobile properties and slow action in killing weeds allow the herbicide to move throughout the plant to kill all meristems, making it effective for perennial weed control. Since commercialization in 1974, its use has grown to dominate the herbicide market. Much of its use is on transgenic, glyphosate-resistant crops (GRCs), which have been the dominant transgenic crops worldwide. GRCs with glyphosate provided the most effective and inexpensive weed management technology in history for a decade or more. However, as a consequence of the rapid increase in glyphosate-resistant (GR) weeds, the effectiveness of glyphosate use in GRCs is declining. Critics have claimed that glyphosate-treated GRCs have altered mineral nutrition and increased susceptibility to plant pathogens because of glyphosate's ability to chelate divalent metal cations, but the complete resistance of GRCs to glyphosate indicates that chelating metal cations do not contribute to the herbicidal activity or significantly affect mineral nutrition. The rates of increases in yields of maize, soybean, and cotton in the USA have been unchanged after high adoption rates of GRCs. Glyphosate is toxic to some plant pathogens, and thereby can act as a fungicide in GRCs. Ultra-low doses of glyphosate stimulate plant growth in glyphosate-susceptible plants by unknown mechanisms. Despite rapid and widespread increases in GR weeds, glyphosate use has not decreased. However, as GR weeds increase, adoption of alternative technologies will eventually lead to decreased use. Published 2017. This article is a U.S. Government work and is in the public domain in the USA. Published 2017. This article is a U.S. Government work and is in the public domain in

  20. Smart wearable systems: current status and future challenges.

    Science.gov (United States)

    Chan, Marie; Estève, Daniel; Fourniols, Jean-Yves; Escriba, Christophe; Campo, Eric

    2012-11-01

    Extensive efforts have been made in both academia and industry in the research and development of smart wearable systems (SWS) for health monitoring (HM). Primarily influenced by skyrocketing healthcare costs and supported by recent technological advances in micro- and nanotechnologies, miniaturisation of sensors, and smart fabrics, the continuous advances in SWS will progressively change the landscape of healthcare by allowing individual management and continuous monitoring of a patient's health status. Consisting of various components and devices, ranging from sensors and actuators to multimedia devices, these systems support complex healthcare applications and enable low-cost wearable, non-invasive alternatives for continuous 24-h monitoring of health, activity, mobility, and mental status, both indoors and outdoors. Our objective has been to examine the current research in wearable to serve as references for researchers and provide perspectives for future research. Herein, we review the current research and development of and the challenges facing SWS for HM, focusing on multi-parameter physiological sensor systems and activity and mobility measurement system designs that reliably measure mobility or vital signs and integrate real-time decision support processing for disease prevention, symptom detection, and diagnosis. For this literature review, we have chosen specific selection criteria to include papers in which wearable systems or devices are covered. We describe the state of the art in SWS and provide a survey of recent implementations of wearable health-care systems. We describe current issues, challenges, and prospects of SWS. We conclude by identifying the future challenges facing SWS for HM. Copyright © 2012 Elsevier B.V. All rights reserved.

  1. Current status of neutron capture therapy

    International Nuclear Information System (INIS)

    2001-05-01

    There are about 6000 new glioblastoma multiform brain tumours diagnosed each year in the United States of America alone. This cancer is usually fatal within six months of diagnosis even with current standard treatments. Research on boron neutron capture therapy (BNCT) has been considered as a method of potentially curing such cancers. There is a great interest at under-utilised research reactors institutions to identify new medical utilization, attractive to the general public. Neutron capture therapy is a true multidisciplinary topic with a large variety of individuals involved. This publication attempts to provide current information for all those thinking about being involved with NCT, based on the knowledge and experience of those who have pioneered the treatment. It covers the whole range of NCT from designing reactor conversions or new facilities, through to clinical trials and their effectiveness. However, since most work has been done with boron capture therapy for brain tumours using modified thermal research reactors, this tends to be the focus of the report. One of the factors which need to be addressed at the beginning is the timing of the further development of NCT facilities. It should be emphasised that all current work is still at the research stage. Many of those now involved believe that there is little need for many more research facilities until such time as the treatment shows more promising results. For this and other reasons discussed in the report, very serious consideration should be given by research reactor owners and operators before spending large sums of money converting their facilities for NCT

  2. [Current Status of Translational Research on Constipation].

    Science.gov (United States)

    Lee, Hyun Jik; Park, Kyung Sik

    2016-09-25

    Constipation is one of the most common gastrointestinal disorders with a prevalence up to 16.5% in the general population. It is frequently multifactorial and the pathophysiologic mechanism of constipation is not fully understood. Many preclinical studies of constipation have used animal models. Translational research using these animal models is essential to the investigation of neurogenic and myogenic mechanisms of colon, and to the estimation of the clinical efficacy of new drugs. In this review, we discuss some of the current translational research projects on constipation using animal models.

  3. Endoscopic full-thickness resection: Current status.

    Science.gov (United States)

    Schmidt, Arthur; Meier, Benjamin; Caca, Karel

    2015-08-21

    Conventional endoscopic resection techniques such as endoscopic mucosal resection or endoscopic submucosal dissection are powerful tools for treatment of gastrointestinal neoplasms. However, those techniques are restricted to superficial layers of the gastrointestinal wall. Endoscopic full-thickness resection (EFTR) is an evolving technique, which is just about to enter clinical routine. It is not only a powerful tool for diagnostic tissue acquisition but also has the potential to spare surgical therapy in selected patients. This review will give an overview about current EFTR techniques and devices.

  4. PDS4: Current Status and Future Vision

    Science.gov (United States)

    Crichton, D. J.; Hughes, J. S.; Hardman, S. H.; Law, E. S.; Beebe, R. F.

    2017-12-01

    In 2010, the Planetary Data System began the largest standards and software upgrade in its history called "PDS4". PDS4 was architected with core principles, applying years of experience and lessons learned working with scientific data returned from robotic solar system missions. In addition to applying those lessons learned, the PDS team was able to take advantage of modern software and data architecture approaches and emerging information technologies which has enabled the capture, management, discovery, and distribution of data from planetary science archives world-wide. What has emerged is a foundational set of standards, services, and common tools to construct and enable interoperability of planetary science archives from distributed repositories. Early in the PDS4 development, PDS selected two missions as drivers to be used to validate the PDS4 approach: LADEE and MAVEN. Additionally, PDS partnered with international agencies to begin discussing the architecture, design, and implementation to ensure that PDS4 would be architected as a world-wide standard and platform for archive development and interoperability. Given the evolving requirements, an agile software development methodology known as the "Evolutionary Software Development Lifecycle" was chosen. This led to incremental releases of increasing capability over time which were matched against emerging mission and user needs. To date, PDS has now performed 16 releases of PDS4 with adoption of over 12 missions world-wide. PDS has also increased from approximately 200 TBs in 2010 to approximately 1.3 PBs of data today, bringing it into the era of big data. The development of PDS4 has not only focused on the construction of compatible archives, but also on increasing access and use of the data in the big data era. As PDS looks forward, it is focused on achieving the recommendations of the Planetary Science Decadal Survey (2013-2022): "support the ongoing effort to evolve the Planetary Data System to an

  5. Neutron scattering equipments in JAERI. Current status

    International Nuclear Information System (INIS)

    Hamaguchi, Yoshikazu; Minakawa, Nobuaki

    2003-01-01

    24 neutron scattering instruments are installed in the JRR-3M research reactor. Among them JAERI has 12 neutron scattering instruments. Those instruments are HRPD for high-resolution structural analysis, TAS-1 and TAS-2 for elastic and inelastic scattering and for magnetic scattering measurements by the polarized neutron, LTAS for elastic and inelastic scattering measurement at a low energy region, and for neutron device development, PNO for topography and for very small angle scattering measurement in a small Q range, NRG for neutron radiography, RESA for internal strain measurements, SANS for the molecule and semi-macroscopic magnetic structural analysis, BIX-2 and BIX-3 for the biological structural analysis research, and PGA for the research of prompt gamma-ray analysis. The university groups have 12 neutron scattering instruments. Since those instruments were installed at the period when JRR-3M was completed, about 10 years have passed. In order to match the old control systems with the progress of recent computer technologies, and peripheral equipment, numbers of instruments are being renewed. In the neutron guide hall of JRR-3M, the Ni mirror guide tube was replaced by a super mirror guide tube to increase neutron flux. The intensity of 2A flux was increased by a factor of about two. (J.P.N.)

  6. Wind energy - current status in the UK

    International Nuclear Information System (INIS)

    Lindley, D.

    1995-01-01

    Twenty two windfarms are operational or are under construction in the U.K. They have a total installed capacity of approximately 140 MW and will generate about 360 GWh in a full year and provide the electricity needs of about 250 000 individuals and save the emission of about 400 000 tonnes of CO 2 each year. Developments so far have required an investment of about Pound 140 million provided mostly by banks and large corporate investors. Financing these projects has broken new ground for renewable technologies and established a framework for the financing of windfarms built using future NFFO contracts. Obtaining planning consents for these windfarms has involved thirteen public inquiries, eight of which have been successful. Four of these remain unused and the result of another is awaited. Statutory and other bodies have responded to the rapid deployment of windfarms by issuing guidelines and these together with Public Inquiry documentation now provide invaluable guidance for the industry. The U.K. market is arguably the most 'open' in Europe and Danish Wind Turbine manufacturers have gained over 50 per cent of the total market. A Japanese manufacturer has gained 25 per cent whilst the major U.K. turbine supplier has gained 17 per cent market share. There are still over thirty manufacturers worldwide and signs that a combination of innovation and market pressures are continuing to reduce the costs of wind energy. (author)

  7. Current status of urological training in Europe.

    Science.gov (United States)

    Carrion, Diego M; Gómez Rivas, Juan; Esperto, Francesco; Patruno, Giulio; Vasquez, Juan L

    2018-01-01

    Modern urological training has changed drastically in the past years, due to the global surgical training trends, advances in technology, subspecialization of the field and, working hour regulations for doctors. The lack of a standardized curriculum across Europe, puts in evidence the great difference in the requirements in every country, from the start of the residency, to obtaining the accreditation. We sought to identify problems related to medical, scientific and surgical activity during urological training, and summarize data obtained from surveys realized during the European Urology Residents Education Programme (EUREP) in 2013, and from countries such as Germany, Italy and Spain. Data from surveys reveals an evident lack of surgical confidence across all participants for major procedures, a general non-compliance with the working hour regulations, and a worrisome risk for burnout and negative consequences in resident's personal lives. Possible solutions are discussed, involving an early preference for a particular practice, and a standardized simulation-based training. The European Association of Urology (EAU) and the European School of Urology (ESU) offer a wide range of working groups, educational and scientific activities for improving the acquisition of competencies (surgical and scientific) of residents and urologists at any point of their career. We describe a brief description of the most important EAU and ESU opportunities.

  8. Current status of food irradiation in Korea

    International Nuclear Information System (INIS)

    Kwon, Joong-Ho

    2007-01-01

    With respect to the safety of irradiated food, the Korean government has accepted in principle the recommendations of international organization (FAO, WHO, IAEA, CAC, etc) as well as the national-based evaluations. Gamma radiation from Co-60 is now authorized to be used for food irradiation of 26 food items (or classes). Two multipurpose gamma-irradiation facilities (Greenpia Tech. Inc. since 1987; SOYA Co. Ltd. since 2002) are now operating for the treatments of selected food items as well as medical supplies. At present, labeled-irradiated products are not yet being marketed at the consumer level. As an alternative process of chemical fumigants, however, irradiation is being partially utilized for the microbial decontamination and pest control of dried spices, vegetable ingredients, etc. for their use in processed foods as minor ingredients. Commercial applications of food irradiation, though small in number, have been steady ever since. This article introduces the commercial progress in food irradiation technology in Korea in terms of research activities, legislation, commercialization, and the control of irradiated foods. (author)

  9. Current status of JMTR for restart

    International Nuclear Information System (INIS)

    Takemoto, Noriyuki; Kimura, Nobuaki; Ooka, Makoto

    2013-01-01

    After the 2011 off the Pacific Coast of Tohoku Earthquake on March 11, 2011, JMTR has been challenging to the inspection of facility equipment, seismic soundness evaluation through earthquake response analysis, repair of facilities, correspondence to the report matters stipulated by laws and regulations, and improvement of irradiation facilities, and based on these, it have formulated the operation schedule from FY2013. In the future, JMTR will explain the soundness of the facilities to the Nuclear Regulatory Commission, and receive the facility's regular inspection after the completion of piping updating work related to the report matters stipulated by laws and regulations. After obtaining the understanding of local municipalities, it aims to restart the facilities in August 2013. After the reoperation, it will make efforts to safely and stably operate the facilities with a target of the operating rate of world top class. In addition, the following challenges are planned: (1) improvement of the facilities based on external funds for expanding utilization, (2) human resource development in the nuclear field by utilizing JMTR, and (3) development of an advanced monitoring system for improving the safety of nuclear power plants by utilizing the irradiation technology that has been accumulated in JMTR. With the aim for JMTR becoming the international hub, JMTR will continue aggressive activities. (A.O.)

  10. RICH upgrade: Current status and future perspectives

    CERN Document Server

    Pistone, A

    2016-01-01

    The LHCb experiment is dedicated to precision measurements of CP violation and rare decays of B hadrons at the Large Hadron Collider (LHC) at CERN (Geneva). The second long shutdown of the LHC is currently scheduled to begin in 2018. During this period the LHCb experiment with all its sub-detectors will be upgraded in order to run at an instantaneous luminosity of 2×10$^{33}$ cm$^{−2}$s$^{−1}$ and to read out data at a rate of 40MHz into a flexible software-based trigger. The Ring Imaging CHerenkov (RICH) system will require new photon detectors and modifications of the optics of the upstream detector. Tests of the prototype of the smallest constituent of the new RICH system have been performed during testbeam sessions at the Test Beam Facility SPS North Area (CERN) in Autumn 2014.

  11. Current status of research on school refusal

    Directory of Open Access Journals (Sweden)

    Cándido J. Inglés

    2015-06-01

    Full Text Available School refusal behavior refers to the avoidance of a child attending school and/or persistent difficulty staying in the classroom throughout the school day. Based on a review of the scientific literature, the aim of this study is to describe the current state of research on school refusal, differentiating between the findings and progress made in Spain from those achieved in the international field. For this purpose, the significance of this phenomenon, in addition to associated risk factors and variables, will be reviewed in the child and youth population. In turn, the commonly used assessment methods and most recommended treatment proposals, mainly based on cognitive behavioral therapy, are discussed. The results reveal several gaps and subjects for debate in some areas of knowledge about school refusal behavior, with differences being found between Spanish and international studies. In conclusion, future studies and challenges in this field are required.

  12. Targeted alpha therapy: Applications and current status

    Energy Technology Data Exchange (ETDEWEB)

    Bruchertseifer, Frank, E-mail: frank.bruchertseifer@ec.europa.eu [European Commission, Joint Research Centre, Karlsruhe (Germany)

    2017-07-01

    Full text: The field of targeted alpha therapy has been developed rapidly in the last decade. Besides {sup 223}Ra, {sup 211}At and {sup 212}Pb/{sup 212}Bi the alpha emitters {sup 225}Ac and {sup 213}Bi are promising therapeutic radionuclides for application in targeted alpha therapy of cancer and infectious diseases. The presentation will give a short overview about the current clinical treatments with alpha emitting radionuclides and will place an emphasis on the most promising clinical testing of peptides and antibodies labelled with {sup 225}Ac and {sup 213}Bi for treatment of metastatic castration-resistant prostate cancer patients with glioma and glioblastoma multiform, PSMA-positive tumor phenotype and bladder carcinoma in situ. (author)

  13. Current status of automated breast ultrasonography

    Directory of Open Access Journals (Sweden)

    Hee Jung Shin

    2015-07-01

    Full Text Available Breast ultrasonography (US is currently considered the first-line examination in the detection Epub ahead of print and characterization of breast lesions. However, conventional handheld US (HHUS has several limitations such as operator dependence and the requirement of a considerable amount of radiologist time for whole-breast US. Automated breast US (ABUS, recently approved by the United States Food and Drug Administration for screening purposes, has several advantages over HHUS, such as higher reproducibility, less operator dependence, and less required physician time for image acquisition. In addition, ABUS provides both a coronal view and a relatively large field of view. Recent studies have reported that ABUS is promising in US screening for women with dense breasts and can potentially replace handheld second-look US in a preoperative setting.

  14. Current status of vulnerable plaque detection.

    LENUS (Irish Health Repository)

    Sharif, Faisal

    2012-02-01

    Critical coronary stenoses have been shown to contribute to only a minority of acute coronary syndromes (ACS) and sudden cardiac death. Autopsy studies have identified a subgroup of high-risk patients with disrupted vulnerable plaque and modest stenosis. Consequently, a clinical need exists to develop methods to identify these plaques prospectively before disruption and clinical expression of disease. Recent advances in invasive and noninvasive imaging techniques have shown the potential to identify these high-risk plaques. The anatomical characteristics of the vulnerable plaque such as thin cap fibroatheroma and lipid pool can be identified with angioscopy, high frequency intravascular ultrasound, intravascular MRI, and optical coherence tomography. Efforts have also been made to recognize active inflammation in high-risk plaques using intravascular thermography. Plaque chemical composition by measuring electromagnetic radiation using spectroscopy is also an emerging technology to detect vulnerable plaques. Noninvasive imaging with MRI, CT, and PET also holds the potential to differentiate between low and high-risk plaques. However, at present none of these imaging modalities are able to detect vulnerable plaque neither has been shown to definitively predict outcome. Nevertheless in contrast, there has been a parallel development in the physiological assessment of advanced atherosclerotic coronary artery disease. Thus recent trials using fractional flow reserve in patients with modest non flow-limiting stenoses have shown that deferral of PCI with optimal medical therapy in these patients is superior to coronary intervention. Further trials are needed to provide more information regarding the natural history of high-risk but non flow-limiting plaque to establish patient-specific targeted therapy and to refine plaque stabilizing strategies in the future.

  15. Hip resurfacing: history, current status, and future.

    Science.gov (United States)

    Amstutz, Harlan C; Le Duff, Michel J

    2015-01-01

    Hip resurfacing arthroplasty (HRA) presents several advantages over conventional total hip arthroplasty (THA), including conservation and preservation of bone, reduced risk of dislocation, easy replication of hip biomechanics and easy revision if needed. It is a particularly appealing procedure for young patients. HRA has been performed for over 40 years following the same technological advances as THA. The bearing material used by most designs is metal-on-metal (MoM), which has the best compromise between strength and wear properties. However, MoM HRA has a specific set of possible complications. Aseptic femoral failures were initially the most prevalent cause for revision but progress in patient selection and surgical technique seem to have resolved this problem. Wear-related failures (high metal ion levels and adverse local tissue reactions) are now the main concern, and are essentially associated with poor acetabular component design and orientation, to which MoM is more sensitive than other bearing materials. The concept of functional coverage is key to understanding how MoM bearings are affected by edge wear. Only a 3-D assessment of cup position (e.g., the contact patch to rim distance) provides the necessary information to determine the role of cup positioning in relationship with abnormal bearing wear.The concept of hip resurfacing is more valid today than ever as the age of the patients in need of hip arthroplasty keeps getting lower. The recent publication of several excellent long-term survivorship results suggests that selection of a well-designed resurfacing system and accuracy in the placement of the cup can achieve long-term durability.

  16. Current status of fusion reactor blanket thermodynamics

    International Nuclear Information System (INIS)

    Veleckis, E.; Yonco, R.M.; Maroni, V.A.

    1979-04-01

    Recent studies of liquid lithium have concentrated on its sorption characteristics for hydrogen isotopes and its interaction with common impurity elements. Hydrogen isotope sorption data (P-C-T relations, activity coefficients, Sieverts' constants, plateau pressures, isotope effects, free energies of formation, phase boundaries etc.) are presented in a tabular form that can be conveniently used to extract thermodynamic information for the α-phase of the Li-LiH, Li-LiD, and Li-LiT systems and to construct complete phase diagrams. Recent solubility data for Li 3 N, Li 2 O, and Li 2 C 2 in liquid lithium are discussed with emphasis on the prospects for removing these species by cold-trapping methods. Current studies on the sorption of hydrogen in solid lithium alloys (e.g., Li--Al and Li--Pb), made using a new technique (the hydrogen titration method), have shown that these alloys should lead to smaller blanket-tritium inventories than are attainable with liquid lithium and that the P-C-T relationships for hydrogen in Li--M alloys can be estimated from lithium activity data for these alloys

  17. Current status of the PBMR licensing project

    International Nuclear Information System (INIS)

    Mysen, A.; Clapisson, G.A.; Metcalf, P.E.

    2000-01-01

    The CNS is currently reviewing the PBMR conceptual design from a licensibility point of view. The PBMR concept is based on a High Temperature Gas Cooled Reactor - pebble bed reactor type. It is anticipated that the PBMR design will rely on inherent safety characteristics to contain fission products within fuel over the full range of design basis events. This feature combined with the high temperature integrity of the fuel and structural graphite, allows the safe use of a high coolant temperature, which allows consideration of the future development of this reactor for non-electrical applications of nuclear heat for industrial use. The CNS licensing approach requires that the licensing and design basis of the plant should respect prevailing international norms and practices and that a quantitative risk assessment should demonstrate compliance with the CNS fundamental safety standards. The first stage of the licensing process is now ongoing; this is a pre-application phase, which will result in a statement on licensibility being issued. Identification of the specific documentation requirements and information needed is required across every step of the licensing process. Top level regulatory requirements have been established for the PBMR. They include the CNS fundamental safety standard and basic licensing criteria, which describes requirements on licensees of nuclear installations regarding risk assessment and compliance with the safety criteria and define classification of licensing basis events. (author)

  18. Current status of adrenalectomy for Cushing's disease

    International Nuclear Information System (INIS)

    Brunicardi, F.C.; Rosman, P.M.; Lesser, K.L.; Andersen, D.K.

    1985-01-01

    To evaluate the current use of adrenalectomy in the treatment of Cushing's disease, we reviewed seven consecutive patients who have undergone adrenalectomy for Cushing's disease at this medical center during 1983 to 1984. Seventy-one percent (5/7) had pituitary, or type I, Cushing's disease, while 29% (2/7) had adrenal, or type II, Cushing's disease from either an adenoma or an adrenocortical carcinoma. Presenting signs and symptoms, either initially or at the time of recurrence, were typical of Cushing's syndrome. Four of five patients with type I disease had recurrent disease after transphenoidal hypophysectomy, bilateral adrenalectomy, or unilateral adrenalectomy. In three of five patients, medical therapy of hypercortisolism was abandoned because of adverse side effects. Preoperative evaluation in all patients included cortisol and ACTH levels, dexamethasone suppression tests, and computerized tomography (both abdominal and head). In patients with a prior history of adrenalectomy, radiocholesterol scans were also performed and were useful. Angiographic procedures were not required in these patients. In patients with type I disease, posterior operative approaches were used. In patients with type II disease, an anterolateral approach was used. Posterolateral incisions are preferred over Hugh-Young incisions and provide better exposure with a reduced risk of poor wound healing. Morbidity and mortality included one death and three nonhealing wounds. In the six surviving patients, symptoms resolved with variable frequency. Findings suggestive of Nelson's syndrome (hyperpigmentation) have occurred in two patients; serial computerized tomographic scans fail to reveal evidence of pituitary tumors

  19. Isobar Separator for Anions: Current status

    International Nuclear Information System (INIS)

    Alary, Jean-François; Javahery, Gholamreza; Kieser, William; Zhao, Xiao-Lei; Litherland, Albert; Cousins, Lisa; Charles, Christopher

    2015-01-01

    The Isobar Separator for Anions (ISA) is an emerging separation technique of isobars applied first to the selective removal of 36 S from 36 Cl, achieving a relative suppression ratio of 6 orders of magnitude. Using a radio-frequency quadrupole (RFQ) column incorporating low energy gas cells, this innovative technique enables the use of a wide range of low energy ion–molecule reactions and collisional-induced dissociation processes for suppressing specific atomic of molecular anions with a high degree of selectivity. Other elemental pairs (analyte/isobar) successfully separated at AMS level include Ca/K, Sr/(Y, Zr), Cs/Ba, Hf/W and Pu/U. In view of these initial successes, an effort to develop a version of the ISA that can be used as a robust technique for routine AMS analysis has been undertaken. We will discuss the detailed layout of a practical ISA and the functional requirements that a combined ISA/AMS should meet. These concepts are currently being integrated in a pre-commercial ISA system that will be installed soon at the newly established A.E. Lalonde Laboratory in Ottawa, Canada.

  20. Isobar Separator for Anions: Current status

    Energy Technology Data Exchange (ETDEWEB)

    Alary, Jean-François, E-mail: alaryjf@isobarex.ca [Isobarex Corp., 32 Nixon Road Unit #1, Bolton, ON L7E 1W2 (Canada); Javahery, Gholamreza [IONICS Mass Spectrometry, 32 Nixon Road Unit #1, Bolton, ON L7E 1W2 (Canada); Kieser, William; Zhao, Xiao-Lei [Andre E. Lalonde Accelerator Mass Spectrometry Laboratory, Advanced Research Complex, University of Ottawa, 25 Templeton Street, Ottawa, ON K1N 6N5 (Canada); Litherland, Albert [IsoTrace Laboratory, Department of Physics, University of Toronto, 60 St. George Street, Toronto, ON M5S 3B1 (Canada); Cousins, Lisa [IONICS Mass Spectrometry, 32 Nixon Road Unit #1, Bolton, ON L7E 1W2 (Canada); Charles, Christopher [Andre E. Lalonde Accelerator Mass Spectrometry Laboratory, Advanced Research Complex, University of Ottawa, 25 Templeton Street, Ottawa, ON K1N 6N5 (Canada)

    2015-10-15

    The Isobar Separator for Anions (ISA) is an emerging separation technique of isobars applied first to the selective removal of {sup 36}S from {sup 36}Cl, achieving a relative suppression ratio of 6 orders of magnitude. Using a radio-frequency quadrupole (RFQ) column incorporating low energy gas cells, this innovative technique enables the use of a wide range of low energy ion–molecule reactions and collisional-induced dissociation processes for suppressing specific atomic of molecular anions with a high degree of selectivity. Other elemental pairs (analyte/isobar) successfully separated at AMS level include Ca/K, Sr/(Y, Zr), Cs/Ba, Hf/W and Pu/U. In view of these initial successes, an effort to develop a version of the ISA that can be used as a robust technique for routine AMS analysis has been undertaken. We will discuss the detailed layout of a practical ISA and the functional requirements that a combined ISA/AMS should meet. These concepts are currently being integrated in a pre-commercial ISA system that will be installed soon at the newly established A.E. Lalonde Laboratory in Ottawa, Canada.

  1. The current status of the MASHA setup

    Energy Technology Data Exchange (ETDEWEB)

    Vedeneev, V. Yu., E-mail: vvedeneyev@gmail.com; Rodin, A. M.; Krupa, L.; Belozerov, A. V.; Chernysheva, E. V.; Dmitriev, S. N.; Gulyaev, A. V.; Gulyaeva, A. V.; Kamas, D. [Joint Institute for Nuclear Research, Flerov Laboratory of Nuclear Reactions (Russian Federation); Kliman, J. [Slovak Academy of Sciences, Institute of Physics (Slovakia); Komarov, A. B.; Motycak, S.; Novoselov, A. S.; Salamatin, V. S.; Stepantsov, S. V.; Podshibyakin, A. V.; Yukhimchuk, S. A. [Joint Institute for Nuclear Research, Flerov Laboratory of Nuclear Reactions (Russian Federation); Granja, C.; Pospisil, S. [Czech Technical University in Prague, Institute of Experimental and Applied Physics (Czech Republic)

    2017-11-15

    The MASHA setup designed as the mass-separator with the resolving power of about 1700, which allows mass identification of superheavy nuclides is described. The setup uses solid ISOL (Isotope Separation On-Line) method. In the present article the upgrade of some parts of MASHA are described: target box (rotating target + hot catcher), ion source based on electron cyclotron resonance, data acquisition, beam diagnostics and control systems. The upgrade is undertaken in order to increase the total separation efficiency, reduce the separation time, of the installation and working stability and make possible continuous measurements at high beam currents. Ion source efficiency was measured in autonomous regime with using calibrated gas leaks of Kr and Xe injected directly to ion source. Some results of the first experiments for production of radon isotopes using the multi-nucleon transfer reaction {sup 48}Ca+{sup 242}Pu are described in the present article. The using of TIMEPIX detector with MASHA setup for neutron-rich Rn isotopes identification is also described.

  2. The current research status of enhancer RNAs.

    Science.gov (United States)

    Cheng, Xiao; Yang, Qiong; Tan, Zhen-Dong; Tan, Ya; Pu, Hongzhou; Zhao, Xue; Zhang, Shun-Hua; Zhu, Li

    2017-09-20

    Enhancers are key cis-acting gene regulatory elements in eukaryotes, which can effectively promote the expression of target genes. Emerging evidence showed that enhancers in activation state could be transcribed to enhancer RNAs (eRNAs), the processes of which are regulated by various signaling systems and actions of signal-dependent transcription factors. Compared with the other transcripts (e.g. lncRNA, mRNA), eRNAs have shorter sequences, lower stability, and higher tissue specificity. eRNAs play roles in the initiation or stabilization of enhancer-promoter looping, and promote the expression of target genes. Recent studies have further showed that eRNAs have crucial roles in biological processes, such as development and disease initiation and progression. However, functional studies of eRNAs are currently lacking, and the regulatory mechanisms of eRNAs are still uncertain. Herein, we focus on the features, research methods and functional properties of eRNAs, and discusse the possibility of using eRNAs as therapeutic targets. We hope this discussion might provide some insights for further research on eRNAs.

  3. Current status of robot-assisted surgery.

    Science.gov (United States)

    Ng, Ada T L; Tam, P C

    2014-06-01

    The introduction of robot-assisted surgery, and specifically the da Vinci Surgical System, is one of the biggest breakthroughs in surgery since the introduction of anaesthesia, and represents the most significant advancement in minimally invasive surgery of this decade. One of the first surgical uses of the robot was in orthopaedics, neurosurgery, and cardiac surgery. However, it was the use in urology, and particularly in prostate surgery, that led to its widespread popularity. Robotic surgery, is also widely used in other surgical specialties including general surgery, gynaecology, and head and neck surgery. In this article, we reviewed the current applications of robot-assisted surgery in different surgical specialties with an emphasis on urology. Clinical results as compared with traditional open and/or laparoscopic surgery and a glimpse into the future development of robotics were also discussed. A short introduction of the emerging areas of robotic surgery were also briefly reviewed. Despite the increasing popularity of robotic surgery, except in robot-assisted radical prostatectomy, there is no unequivocal evidence to show its superiority over traditional laparoscopic surgery in other surgical procedures. Further trials are eagerly awaited to ascertain the long-term results and potential benefits of robotic surgery.

  4. [Current status of noninvasive hemodynamics in hypertension].

    Science.gov (United States)

    Waisman, G

    Hypertension is a haemodynamic disorder resulting from a persistent mismatch between cardiac output and peripheral resistance. Hypertension undergoes haemodynamic progression during its natural history. Impedance cardiography is a method of evaluating the cardiovascular system that obtains haemodynamic information from beat to beat through the analysis of variations in the impedance of the thorax on the passage of an electric current. Impedance cardiography unmasks the haemodynamic deterioration underlying the increase in blood pressure as age and systolic blood pressure increases. This method may help to improve blood pressure control through individualized treatment with reduction of peripheral resistance, maintenance of cardiac output or its increase, improvement of arterial compliance and preservation of organ-tissue perfusion. It is useful in the management of patients with resistant hypertension, since a greater percentage of patients controlled with changes in the treatment in relation to the haemodynamic measurements are obtained. Impedance cardiography is important and has prognostic utility in relation to a haemodynamic deterioration pattern and increased cardiovascular events. Copyright © 2017 SEH-LELHA. Publicado por Elsevier España, S.L.U. All rights reserved.

  5. Transperitoneal laparoscopic live donor nephrectomy: Current status

    Directory of Open Access Journals (Sweden)

    A Srivastava

    2007-01-01

    Full Text Available Renal transplantation is the treatment of choice for a suitable patient with end stage renal disease. Unfortunately, the supply of donor organs is greatly exceeded by demand. In many countries the use of kidneys from living donors has been widely adopted as a partial solution. Traditionally donor nephrectomy has been performed via a open flank incision however with some morbidity like pain and a loin scar. Currently, the donor nephrectomy is increasingly being performed laparoscopically with the objective of reducing the morbidity. It is also hoped that this will lead to increasing acceptance of living donation. The first minimally invasive living donor nephrectomy was carried out in 1995 at the Johns Hopkins Medical Center and since then many centers have undertaken laparoscopic living donor nephrectomy. The laparoscopic approach substantially reduces the donor morbidity and wound related problems associated with open nephrectomy. The laparoscopic techniques thus have the potential to increase the number of living kidney donors. The present article attempts to review the safety and efficacy of transperitoneal laparoscopic donor nephrectomy.

  6. Current status of tritium calorimetry at TLK

    International Nuclear Information System (INIS)

    Buekki-Deme, A.; Alecu, C.G.; Kloppe, B.; Bornschein, B.

    2015-01-01

    Inside a tritium facility, calorimetry is an important analytical method as it is the only reference method for accountancy (it is based on the measurement of the heat generated by the radioactive decay). Presently, at Tritium Laboratory Karlsruhe (TLK), 4 calorimeters are in operation, one of isothermal type and three of inertial guidance control type (IGC). The volume of the calorimeters varies between 0.5 and 20.6 liters. About two years ago we started an extensive work to improve our calorimeters with regard to reliability and precision. We were forced to upgrade 3 of our 4 calorimeters due to the outdated interfaces and software. This work involved creating new LabView programs driving the devices, re-tuning control loops and replacing obsolete hardware components. In this paper we give a review on the current performance of our calorimeters, comparing it to recently available devices from the market and in the literature. We also show some ideas for a next generation calorimeter based on experiences with our IGC calorimeters and other devices reported in the literature. (authors)

  7. Advanced radiation chemistry research: Current status

    International Nuclear Information System (INIS)

    1995-10-01

    Radiation chemistry is a branch of chemistry that studies chemical transformations in materials exposed to high-energy radiations. It is based on the use of ionizing radiation as the initiator or catalyst in chemical reactions. The most significant advantage of radiation chemistry lies in its ability to be used in the production and study of almost any reactive atomic and molecular species playing a part in chemical reaction, synthesis, industrial processes, or in biological systems. Over the the last few years a number of meetings have taken place, under the auspices of the IAEA, in order to evaluate recent developments in radiation chemistry as well as the trends indicated by the results obtained. Radiation chemists from different countries have participated at these meetings. The present publication, a companion to the previous publication - New Trends and Development in Radiation Chemistry, IAEA-TECDOC-527 (1989) - includes some of the important contributions presented at these meetings. It is hoped that it will provide a useful overview of current activities and of emerging trends in this field, thus promoting better understanding of potential contributions of radiation chemistry to other fields of knowledge as well as to practical applications in industry, medicine and agriculture. Refs, figs and tabs

  8. Current status of nuclear safety research

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Efforts at nuclear safety research have expanded year by year in Japan, in term of money and technical achievement. The Atomic Energy Commission set last year the five year nuclear safety research program, a guideline by which various research institutes will be able to develop their own efforts in a concerted manner. From the results of the nuclear safety research which cover very wide areas ranging from reactor engineering safety, safety of nuclear fuel cycle facilities, prevention of radiation hazards to the adequate treatment and disposal of radioactive wastes, AIJ hereafter focuses of LWR engineering safety and prevents two articles, one introducing the current results of the NSSR program developed by JAERI and the other reporting the LWR reliability demonstration testing projects being promoted by MITI. The outline of these demonstration tests was reported in this report. The tests consist of earthquake resistance reliability test of nuclear power plants, steam generator reliability tests, valve integrity tests, fuel assembly reliability tests, reliability tests of heat affected zones and reliability tests of pumps. (Kobatake, H.)

  9. Instantaneous Project Controls: Current Status, State of the Art, Benefits, and Strategies

    Science.gov (United States)

    Abbaszadegan, Amin

    2016-01-01

    Despite advancements in construction and construction-related technology, capital project performance deviations, typically overruns, remain endemic within the capital projects industry. Currently, management is generally unaware of the current status of their projects, and thus monitoring and control of projects are not achieved effectively. In…

  10. New horizons in predictive toxicology: current status and application

    National Research Council Canada - National Science Library

    Wilson, A. G. E

    2012-01-01

    "In this comprehensive discussion of predictive toxicology and its applications, leading experts express their views on the technologies currently available and the potential for future developments...

  11. Current status of J-PARC/MLF

    International Nuclear Information System (INIS)

    Seto, H.

    2016-01-01

    Japan Proton Accelerator Research Complex (J-PARC) aims to pursue frontier science in particle physics, nuclear physics, materials science, life science and nuclear technology. The accelerator complex consists of accelerators as follows; 400 MeV normal-conducting Linac, 600 MeV superconducting Linac, 3 GeV rapid cycle synchrotron ring (RCS) providing proton beams at 333 μA, and 30 GeV (designed maximum: 50 GeV) main ring (MR) providing proton beams at 15 μA. The beam from the RCS is injected to the Materials and Life Science Experimental Facility (MLF). Last year, MLF has started operation from February 22 after the recovery from a small fire incident in the second experimental hall. It stopped again due to a leakage of cooling water from the neutron target vessel on April 30 during the 500 kW proton beam operation. After the improvement of the target vessel, MLF restarted on October 27 at 500 kW for the user program, however, it stopped again due to the cooling water leakage. The user program has restarted at 200 kW in the middle of February 2016 by replacing the target vessel to a reserved one. A newly designed target vessel reducing the number of welding spots is under construction and will arrive the next year. After replacing the present target vessel to the newly designed one, we could resume the process to increase the proton beam power to achieve the designed maximum, 1 MW. In MLF, 21 neutron instruments have been funded. Within these instruments, 19 are in operation for the user program and 2 instruments are under commissioning. Now the experimental hall is almost full with instruments, leaving only 2 ports are available for instruments in future. World-class scientific outputs have been already created in various scientific fields, ranging from basic science to industrial application. Since J-PARC is internationally open for users, we have got experimental proposals from abroad more than 10% of the whole proposals. More than 20% of proposals have come

  12. On the Relationship Between First Occupation and Current Occupational Status

    Science.gov (United States)

    Beck, E. M.; Madans, J. H.

    1974-01-01

    Three alternative models are presented to represent the decreased importance of the status of first job on current occupational status overtime; there is evidence that the effects of first job erode with time. Models not explicitly incorporating labor force experience may suffer a serious specification error. (Author/AJ)

  13. The current status of radiological protection infraestructures in Tanzania

    International Nuclear Information System (INIS)

    Ngalie, J.E.; Mompome, W.K.; Meza, L.H.

    2008-01-01

    Without adequate and sustainable radiation protection infrastructure, the benefits associated with safe use of nuclear technology and atomic energy might be jeopardized. In the United Republic of Tanzania, the Atomic Energy Act No. 7 of 2003 established the Tanzania Atomic Energy Commission as sole regulatory body responsible for regulating and controlling the safe and peaceful utilization of nuclear technology in the country. The Atomic Energy (Protection from ionizing radiation) Regulations, 2004 further specifies practices designed to ensure that unnecessary exposure of persons to ionizing radiation is avoided, that all exposures are kept as low as reasonably achievable and that all the dose limits specified in the radiation protection standards are not exceeded. This is achieved through the systems of notification, authorizations through registration and licensing, safety and security of radiation sources as well as regulatory inspections and enforcements. These activities are performed by the Commission with operational funds allocated by the Government of Tanzania. The Commission further provides other services namely individual monitoring; calibration services; education and training to radiation workers, public as well as law enforcers; and safe management of radioactive waste. Despite such achievement, still there are a lot to be done in order to strengthen the radiation protection infrastructure in Tanzania. These include issues such as gaps in our legislations, regulations and guidance, security of sources, enforcement of laws, etc. This paper describes and discusses the current status of the regulatory control activities and radiation protection services provided by the Commission and suggestions for further improvement of radiological protection infrastructure in Tanzania. (author)

  14. Radiation processing in India. Current status and future program

    International Nuclear Information System (INIS)

    Mittal, Jai Pal

    2003-01-01

    Radiation processing is an alternative to conventional methods such as thermal and chemical processing in many industrial applications. In India, this technology has found extensive applications in area of healthcare, agriculture, food preservation, industry and environment. Both gamma radiation and electron beam accelerators are being utilized for this purpose. Presently, 6 commercial gamma irradiators housing about 1.5 million curie Co-60 and an annual turnover of over US$ 2 million and 3 commercial electron beam (EB) accelerators with installed capacity of 185 kW are commercially operating in India. Five demonstration plants housing a total of 0.5 million curie Co-60 have been set up to assess the techno-commercial viability of the processes such as radiation vulcanization of natural rubber latex, decontamination of spices, hygienization of sewage sludge, shelf-life extension of onions. The new areas being explored include use of electron beam treated pulp for viscose-rayon process, radiation processed 'hydrogel' burn/wound dressings and radiation processing of natural polymers. In the present paper, the current status of this program, especially the recent developments and future direction of radiation processing technology in India is reviewed. (author)

  15. Current Status of On-Site Wastewater Management

    Science.gov (United States)

    Senn, Charles L.

    1978-01-01

    Wastewater management is becoming an important environmental issue nationally. This article reports the history and current status of wastewater management. Regulatory programs are discussed with specific state examples. Needs assessment is also included. (MA)

  16. Health technology reassessment of non-drug technologies: current practices.

    Science.gov (United States)

    Leggett, Laura; Noseworthy, Tom W; Zarrabi, Mahmood; Lorenzetti, Diane; Sutherland, Lloyd R; Clement, Fiona M

    2012-07-01

    Obsolescence is a natural phase of the lifecycle of health technologies. Given increasing cost of health expenditures worldwide, health organizations have little choice but to engage in health technology reassessment (HTR); a structured, evidence-based assessment of the medical, social, ethical, and economic effects of a technology, currently used within the healthcare system, to inform optimal use of that technology in comparison to its alternatives. This research was completed to identify and summarize international HTR initiatives for non-drug technologies. A systematic review was performed using the terms disinvestment, obsolescence, obsolete technology, ineffective, reassessment, reinvestment, reallocation, program budgeting, and marginal analysis to search PubMED, MEDLINE, EMBASE, and CINAHL until November 2011. Websites of organizations listed as members of INAHTA and HTAi were hand-searched for gray literature. Documents were excluded if they were unavailable in English, if the title/abstract was irrelevant to HTR, and/or if the document made no mention of current practices. All citations were screened in duplicate with disagreements resolved by consensus. Sixty full-text documents were reviewed and forty were included. One model for reassessment was identified; however, it has never been put into practice. Eight countries have some evidence of past or current work related to reassessment; seven have shown evidence of continued work in HTR. There is negligible focus on monitoring and implementation. HTR is in its infancy. Although health technology reassessments are being conducted, there is no standardized approach. Future work should focus on developing and piloting a comprehensive methodology for completing HTR.

  17. [Current status of and prospects for contraception].

    Science.gov (United States)

    Calzolari, E; Parisi, C

    1989-01-01

    It is estimated that at the current rate of growth the world's population will reach 8.5 billion by the year 2025 and 10-11 billion by the end of the 21st century. 90% of this population increase would occur in developing countries, where only 38% of couples used contraceptives during 1980-81 compared to 68% in developed countries. About 300 million couples in the Third World do not use contraceptives, although they do not want more children. Some of these contraceptives include natural steroids, such as progesterone and 17 beta-estradiol that is used for treatment of menopause (1-2 mg daily po). Medroxyprogesterone acetate and norethisterone enanthate depot injections have long-acting properties with low failure rates (3.6% + 0.7 pregnancies/100 women years) if given every 3 months, amenorrhea may occur. RU-486, substance with antiprogesterone activity, inhibits hormonal metabolism during ovulation in a dose of 100 mg/day, just like norgestimate. HRP 102 consists of 50 mg norethisterone enanthate and 5 mg estradiol valerate and cycloprovera contains 25 mg medroxyprogesterone acetate with 5 mg of estradiol cypionate. Both of these agents are effective contraceptives for 2 months. Norplant is implanted subcutaneously in capsule forms. It releases levonorgestrel/LNG for 6-7 years, and in a study of 992 women 2.6 pregnancies occurred for 100 women in the course of 5 years. Vaginal suppositories can release 20 mg/day LNG, or 5-10 mg progesterone/day, and they are considered ideal for nursing mothers. The IUD has been used by 60 million women, however, pelvic inflammatory disease may be associated with its use. Sulprostone and RU-486 (mifepristone) are post ovulatory agents with effectiveness of up to 90 day. Female sterilization has problems of reversibility, male sterilization is less accepted, and other male endocrine approaches producing azoospermia are in the testing phase. The ideal contraceptive with properties of wide acceptability, reversibility, and

  18. PRIMitive Asteroids Spectroscopic Survey - PRIMASS: Current Status

    Science.gov (United States)

    Pinilla-Alonso, Noemí; de León, Julia; Morate, David; de Prá, Mario; Lorenzi, Vania; Licandro, Javier; Campins, Humberto; Ali-Lagoa, Victor

    2017-10-01

    in the inner and outer belt.In this work, we present the current state of the PRIMASS survey, and we include major results from the data already analyzed. Finally, we will draft the plans for the future.

  19. Review of Current Nuclear Vacuum System Technologies

    International Nuclear Information System (INIS)

    Carroll, M.; McCracken, J.; Shope, T.

    2003-01-01

    Nearly all industrial operations generate unwanted dust, particulate matter, and/or liquid wastes. Waste dust and particulates can be readily tracked to other work locations, and airborne particulates can be spread through ventilation systems to all locations within a building, and even vented outside the building - a serious concern for processes involving hazardous, radioactive, or nuclear materials. Several varieties of vacuum systems have been proposed and/or are commercially available for clean up of both solid and liquid hazardous and nuclear materials. A review of current technologies highlights both the advantages and disadvantages of the various systems, and demonstrates the need for a system designed to address issues specific to hazardous and nuclear material cleanup. A review of previous and current hazardous/nuclear material cleanup technologies is presented. From simple conventional vacuums modified for use in industrial operations, to systems specifically engineered for such purposes, the advantages and disadvantages are examined in light of the following criteria: minimal worker exposure; minimal secondary waste generation;reduced equipment maintenance and consumable parts; simplicity of design, yet fully compatible with all waste types; and ease of use. The work effort reviews past, existing and proposed technologies in light of such considerations. Accomplishments of selected systems are presented, including identified areas where technological improvements could be suggested

  20. The current status of HANARO utilization

    International Nuclear Information System (INIS)

    Kim, Hark Rho; Lee, Choong Sung; Sohn, Jae Min; Park, Kyung Bae

    2003-01-01

    The HANARO (High-flux Advanced Neutron Application Research Reactor) is now operating at 24 MW to meet the user's demands in a variety of utilization fields. The most active field is the neutron scattering and diffraction using the currently available HRPD (High Resolution Powder Diffraction), FCD (Four Circle Diffraction), RSI (Residual Stress Instrument), and SANS (Small Angle Neutron Scattering). Using these instruments, we have been investigating such characteristics as materials' crystal structure and phase transition, residual stress, texture, and hard and soft matters. Through examination and inspection of the test specimens, NRF (Neutron Radiography Facility) is contributing to such fields as the nuclear industry, ordnance industry, aerospace industry, and archaeology. The second utilization field is the fuel and material irradiation test. KAERI (Korea Atomic Energy Research Institute) has developed atomized fuel powder and provided it to USA, France and Argentina. Under the RERTR program, KAERI has been contributing to the development of research reactor fuels of better quality. To test the reactor materials and fuels, instrumented and non-instrumented capsules are widely being used. To produce and supply RIs and pharmaceuticals for medical and industrial purposes, HANARO and its RIPF (Radioisotope Production Facility) has been fully complying with demands so that the national welfare might be enhanced by our efforts. NAA (Neutron Activation Analysis) is assisting the nuclear industry, environmental research and the promotion of the health area. To support all active utilizations, HANARO operators have been making every effort to not only improve the systems, if needed, but also to avoid the inadvertent reactor trip. Based upon this stable neutron supply, we have been developing and expanding the utilization fields and facilities. The PNS(Polarized Neutron Spectrometer) is under construction and the reflectometer is in preparation. The BNCT(Boron Neutron

  1. Artificial neural networks: current status in cardiovascular medicine.

    Science.gov (United States)

    Itchhaporia, D; Snow, P B; Almassy, R J; Oetgen, W J

    1996-08-01

    Artificial neural networks are a form of artificial computer intelligence that have been the subject of renewed research interest in the last 10 years. Although they have been used extensively for problems in engineering, they have only recently been applied to medical problems, particularly in the fields of radiology, urology, laboratory medicine and cardiology. An artificial neural network is a distributed network of computing elements that is modeled after a biologic neural system and may be implemented as a computer software program. It is capable of identifying relations in input data that are not easily apparent with current common analytic techniques. The functioning artificial neural network's knowledge is built on learning and experience from previous input data. On the basis of this prior knowledge, the artificial neural network can predict relations found in newly presented data sets. In cardiology, artificial neural networks have been successfully applied to problems in the diagnosis and treatment of coronary artery disease and myocardial infarction, in electrocardiographic interpretation and detection of arrhythmias and in image analysis in cardiac radiography and sonography. This report focuses on the current status of artificial neural network technology in cardiovascular medical research.

  2. UAS FOR GEO-INFORMATION: CURRENT STATUS AND PERSPECTIVES

    Directory of Open Access Journals (Sweden)

    R. B. Haarbrink

    2012-09-01

    Full Text Available Recent and ongoing developments of state-of-the-art sensor technologies have resulted in smaller and lighter photogrammetric cameras with IMU, lidar scanners and other sensors that can now be integrated with and mounted on the larger Light UAS. This paper describes as an example the successful automatic flight of the 50-megapixel DigiCAM with AEROcontrol IMU developed by IGI flown on Geocopter's GC-201 unmanned helicopter system. The operational and technical requirements of UAS defined in new legislation remain however the safeguard to protect people and costly sensor payload assets. The current prospects of UAS-g face additional challenges related to end-user awareness and the return on investment. The current status of UAS legislation is given in this paper. This legislation justifies UAS-g operations of mapping coastal zones, forests, agricultural fields, and open mines. Sooner return on investment happens when the UAS legislation will be opening up airspace over urban areas (Class 2 approved UAS-g, to longer distances (BLOS operations, and to higher altitudes. UAS-g flights then become feasible to the maximum extent for cadastral mapping of larger areas, oil and gas pipeline monitoring, power line surveys, dike inspection, and highway and railway mapping.

  3. The current status of ASTRO-H/HXT development facility

    Science.gov (United States)

    Furuzawa, Akihiro; Ogasaka, Yasushi; Kunieda, Hideyo; Miyazawa, Takuya; Sakai, Masato; Kinoshita, Yosuke; Makinae, Youta; Sasaya, Shiori; Kanou, Yasufumi; Niki, Daisuke; Ohgi, Takuya; Oishi, Nodoka; Yamane, Koudai; Yamane, Nobuyuki; Ishida, Yosuke; Haba, Yoshito; Tawara, Yuzuru; Yamashita, Koujun; Ishida, Manabu; Maeda, Yoshitomo; Mori, Hideyuki; Tamura, Keisuke; Awaki, Hisamitsu; Okajima, Takashi

    2009-08-01

    We present the current state of the development system of the hard ray telescope onboard ASTRO-H satellite. Japan's 6th X-ray satellite mission ASTRO-H, which is planed to be launched in fiscal year 2013, will carry four X-ray telescopes (XRT). Two of four XRTs are hard X-ray telescopes (HXT) using depth-graded multilayer reflector which provide us the capability of hard X-ray imaging observation up to 80 keV. ASTRO-H/HXT is the light-weight hard X-ray telescope using Pt/C depth-graded multilayer and high-throughput thin-foil optics. The basic technology for fabricating the ASTRO-H/HXT has been established through the balloon borne experiments, "InFOCμS" (US-Japan international joint experiment) and "SUMIT" missions. (Nagoya University, Osaka University and JAXA). Major changes from XRTs onboard InFOCμS and SUMIT missions are large aperture size of 45 cm in diameter, the length of reflectors of 20 cm and the focal length of 12 m (XRTs onboard the balloon missions above have the aperture size of 40 cm in diameter, 13 cm long reflectors and 8 m focal length). Now we have almost finished to establish the mirror production facility dedicated to the ASTRO-H/HXT and are starting to produce foil reflectors for performance verification of 200 mm long reflector. We report the current status of the development facilities and test foil production.

  4. Biomass electric technologies: Status and future development

    International Nuclear Information System (INIS)

    Bain, R.L.; Overend, R.P.

    1992-01-01

    At the present time, there axe approximately 6 gigawatts (GWe) of biomass-based, grid-connected electrical generation capacity in the United States. This capacity is primarily combustion-driven, steam-turbine technology, with the great majority of the plants of a 5-50 megawatt (MW) size and characterized by heat rates of 14,770-17,935 gigajoules per kilowatt-hour (GJ/kWh) (14,000-17,000 Btu/kWh or 18%-24% efficiency), and with installed capital costs of $1,300-$1,500/kW. Cost of electricity for existing plants is in the $0.065-$O.08/kWh range. Feedstocks are mainly waste materials; wood-fired systems account for 88% of the total biomass capacity, followed by agricultural waste (3%), landfill gas (8%), and anaerobic digesters (1%). A significant amount of remote, non-grid-connected, wood-fired capacity also exists in the paper and wood products industry. This chapter discusses biomass power technology status and presents the strategy for the U.S. Department of Energy (DOE) Biomass Power Program for advancing biomass electric technologies to 18 GWe by the year 2010, and to greater than 100 GWe by the year 2030. Future generation systems will be characterized by process efficiencies in the 35%-40% range, by installed capital costs of $770-$900/kW, by a cost of electricity in the $0.04-$O.05/kWh range, and by the use of dedicated fuel-supply systems. Technology options such as integrated gasification/gas-turbine systems, integrated pyrolysis/gas-turbine systems, and innovative direct-combustion systems are discussed, including present status and potential growth. This chapter also presents discussions of the U.S. utility sector and the role of biomass-based systems within the industry, the potential advantages of biomass in comparison to coal, and the potential environmental impact of biomass-based electricity generation

  5. Helicopter Rotor Noise Prediction: Background, Current Status, and Future Direction

    Science.gov (United States)

    Brentner, Kenneth S.

    1997-01-01

    Helicopter noise prediction is increasingly important. The purpose of this viewgraph presentation is to: 1) Put into perspective the recent progress; 2) Outline current prediction capabilities; 3) Forecast direction of future prediction research; 4) Identify rotorcraft noise prediction needs. The presentation includes an historical perspective, a description of governing equations, and the current status of source noise prediction.

  6. Investigate Fundamentals and Performance Improvements of Current In-Line Inspection Technologies for Mechanical Damage Detection

    Science.gov (United States)

    2008-05-01

    This Phase I report provides a comprehensive and in-depth review of the current status of in-line inspection technologies, including, but not limited to, Magnetic (Axial MFL, Circumferential MFL), Ultrasonic (UT), and Geometrical (Caliper) methods, i...

  7. Fission Surface Power Technology Development Status

    Science.gov (United States)

    Palac, Donald T.; Mason, Lee S.; Harlow, Scott

    2009-01-01

    With the potential future deployment of a lunar outpost there is expected to be a clear need for a high-power, lunar surface power source to support lunar surface operations independent of the day-night cycle, and Fission Surface Power (FSP) is a very effective solution for power levels above a couple 10 s of kWe. FSP is similarly enabling for the poorly illuminated surface of Mars. The power levels/requirements for a lunar outpost option are currently being studied, but it is known that cost is clearly a predominant concern to decision makers. This paper describes the plans of NASA and the DOE to execute an affordable fission surface power system technology development project to demonstrate sufficient technology readiness of an affordable FSP system so viable and cost-effective FSP system options will be available when high power lunar surface system choices are expected to be made in the early 2010s.

  8. High-density matter: current status and future challenges

    Directory of Open Access Journals (Sweden)

    Stone J. R.

    2015-01-01

    Full Text Available There are many fascinating processes in the Universe which we observe in more and more in detail thanks to increasingly sophisticated technology. One of the most interesting phenomena is the life cycle of stars, their birth, evolution and death. If the stars are massive enough, they end their lives in the core-collapse supernova explosion, the one of the most violent events in the Universe. As the result, the densest objects in the Universe, neutron stars and/or black holes are created. Naturally, the physical basis of these events should be understood in line with observation. The current status of our knowledge of processes in the life of stars is far from adequate for their true understanding. We show that although many models have been constructed their detailed ability to describe observations is limited or non-existent. Furthermore the general failure of all models means that we cannot tell which are heading in the right direction. A possible way forward in modeling of high-density matter is outlined, exemplified by the quark-meson-coupling model (QMC. This model has a natural explanation for the saturation of nuclear forces and depends on very few adjustable parameters, strongly constrained by the underlying physics. Latest QMC results for compact objects and finite nuclei are presented.

  9. Oil development in China: Current status and future trends

    International Nuclear Information System (INIS)

    Ma Linwei; Fu Feng; Li Zheng; Liu Pei

    2012-01-01

    The future of oil has become an important topic of the discussion of energy policy in China. This paper attempts to present a full picture of the current status and future trends of China’s oil development through system analysis. First, we map a Sankey diagram of China’s oil flow to reveal the physical pattern of China’s oil supply and consumption. Then, we present the historical and ongoing trends of China’s oil flow from key aspects such as oil demand, oil resource availability, technology improvement, and policy adjustment. Based on these understandings, we design three scenarios of China’s oil demand in 2030, and analyze policy implications for oil saving, automotive energy development, and energy security. From the analysis, we draw some conclusions for policy decisions, such as to control the total oil consumption to avoid energy security risks, to enhance oil saving in all sectors with road transportation as the emphasis, and to increase the investment on oil production and refining to secure oil supply and reduce emissions. - Highlights: ► A Sankey Diagram to reveal the physical pattern of China’s oil supply and consumption. ► Present the ongoing trends of China’s oil development. ► Discuss important policy issues such as oil saving, energy security, and emissions reduction.

  10. Preimplantation genetic diagnosis and screening: Current status and future challenges

    Directory of Open Access Journals (Sweden)

    Hsin-Fu Chen

    2018-02-01

    Full Text Available Preimplantation genetic diagnosis (PGD is a clinically feasible technology to prevent the transmission of monogenic inherited disorders in families afflicted the diseases to the future offsprings. The major technical hurdle is it does not have a general formula for all mutations, thus different gene locus needs individualized, customized design to make the diagnosis accurate enough to be applied on PGD, in which the quantity of DNA is scarce, whereas timely result is sometimes requested if fresh embryo transfer is desired. On the other hand, preimplantation genetic screening (PGS screens embryo with aneuploidy and was also known as PGD-A (A denotes aneuploidy in order to enhance the implantation rates as well as livebirth rates. In contrasts to PGD, PGS is still under ferocious debate, especially recent reports found that euploid babies were born after transferring the aneuploid embryos diagnosed by PGS back to the womb and only very few randomized trials of PGS are available in the literature. We have been doing PGD and/or PGS for more than 10 years as one of the core PGD/PGS laboratories in Taiwan. Here we provide a concise review of PGD/PGS regarding its current status, both domestically and globally, as well as its future challenges.

  11. Current status of vaccines against infectious bursal disease.

    Science.gov (United States)

    Müller, Hermann; Mundt, Egbert; Eterradossi, Nicolas; Islam, M Rafiqul

    2012-01-01

    Infectious bursal disease virus (IBDV) is the aetiological agent of the acute and highly contagious infectious bursal disease (IBD) or "Gumboro disease". IBD is one of the economically most important diseases that affects commercially produced chickens worldwide. Along with strict hygiene management of poultry farms, vaccination programmes with inactivated and live attenuated viruses have been used to prevent IBD. Live vaccines show a different degree of attenuation; many of them may cause bursal atrophy and thus immunosuppression with poor immune response to vaccination against other pathogens and an increase in vulnerability to various types of infections as possible consequences. Depending on their intrinsic characteristics or on the vaccination procedures, some of the vaccines may not induce full protection against the very virulent IBDV strains and antigenic variants observed in the last three decades. As chickens are most susceptible to IBDV in their first weeks of life, active immunity to the virus has to be induced early after hatching. However, maternally derived IBDV-specific antibodies may interfere with early vaccination with live vaccines. Thus new technologies and second-generation vaccines including rationally designed and subunit vaccines have been developed. Recently, live viral vector vaccines have been licensed in several countries and are reaching the market. Here, the current status of IBD vaccines is discussed.

  12. Policies for second generation biofuels: current status and future challenges

    Energy Technology Data Exchange (ETDEWEB)

    Egger, Haakan; Greaker, Mads; Potter, Emily

    2011-07-01

    Current state-of-the-art knowledge concludes that green house gas (GHG) emissions must be controlled and reduced within the next 30-40 years. The transport sector contributes almost a fifth of the current global emissions, and its share is likely to increase in the future. The US and a number of European countries have therefore introduced various support schemes for research and development (RandD) of low emission fuels that can potentially replace the current fossil fuels. One such alternative is biofuels. The advantage of biofuels are that it is easy to introduce into the transport sector. On the other hand, recent research papers question whether the supply of feedstock is sufficient, and to what extent biofuels lead to GHG emission reductions. This report reviews the current status of second generation biofuels. Second generation biofuels are made from cellulose, which according to our survey of the literature, is in more abundant supply than the first generation biofuels feedstocks. Furthermore, it seems to have the potential to reduce GHG emissions from the transport sector without leading to devastating land use changes, which recent critique has held against first generation biofuels. Given that governments have decided to support RandD of low emission fuels, we ask the following questions: Should second generation biofuels receive RandD support to the same extent as other low emission fuels like hydrogen? How should support schemes for second generation biofuels be designed? Second generation biofuels can be divided according to the production process into thermo-chemical and bio-chemical. With respect to the thermo-chemical process the potential for cost reductions seems to be low. On the other hand, ethanol made from cellulose using the biochemical conversion process is far from a ripe technology. Expert reports point to several potential technological breakthroughs which may reduce costs substantially. Hence, cellulosic ethanol, should receive direct

  13. CRISPR technologies for bacterial systems: Current achievements and future directions.

    Science.gov (United States)

    Choi, Kyeong Rok; Lee, Sang Yup

    2016-11-15

    Throughout the decades of its history, the advances in bacteria-based bio-industries have coincided with great leaps in strain engineering technologies. Recently unveiled clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated proteins (Cas) systems are now revolutionizing biotechnology as well as biology. Diverse technologies have been derived from CRISPR/Cas systems in bacteria, yet the applications unfortunately have not been actively employed in bacteria as extensively as in eukaryotic organisms. A recent trend of engineering less explored strains in industrial microbiology-metabolic engineering, synthetic biology, and other related disciplines-is demanding facile yet robust tools, and various CRISPR technologies have potential to cater to the demands. Here, we briefly review the science in CRISPR/Cas systems and the milestone inventions that enabled numerous CRISPR technologies. Next, we describe CRISPR/Cas-derived technologies for bacterial strain development, including genome editing and gene expression regulation applications. Then, other CRISPR technologies possessing great potential for industrial applications are described, including typing and tracking of bacterial strains, virome identification, vaccination of bacteria, and advanced antimicrobial approaches. For each application, we note our suggestions for additional improvements as well. In the same context, replication of CRISPR/Cas-based chromosome imaging technologies developed originally in eukaryotic systems is introduced with its potential impact on studying bacterial chromosomal dynamics. Also, the current patent status of CRISPR technologies is reviewed. Finally, we provide some insights to the future of CRISPR technologies for bacterial systems by proposing complementary techniques to be developed for the use of CRISPR technologies in even wider range of applications. Copyright © 2016. Published by Elsevier Inc.

  14. Cyclotron facilities in Brazil: Current status and licensing aspects

    Energy Technology Data Exchange (ETDEWEB)

    Facure, A.; Carvalho, S.M.; Di Prinzio, R.; Silveira, C.S.; Gasparian, P.B.R.; Franca, W.F., E-mail: facure@cnen.gov.br [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil)

    2017-09-01

    Positron Emission Tomography (PET) is a highly sensitive and accurate nuclear medicine imaging technology but the major problem of this technique is the use of radioisotopes with short half-life, less than two hours. The production and selling of short half-life radioisotopes used to be monopoly of the Brazilian Government. In 2006, a Constitutional Amendment revoked the state monopoly due to the need for the use of short half-life radioisotopes in nuclear medicine centers very far from the government production facilities. The aim of this study is to describe the current status of short half-life radioisotopes production in Brazil and discuss some licensing process. In Brazil, as has been occurring worldwide, the number of nuclear medicine centers is increasing. Currently there are 123 services performing PET scans in Brazil. There are 14 cyclotrons operating in Brazil. The type of licensing process conducted in Brazil does not take into account the population density of each state, with a free competition model being adopted. Because of this there is a lot of equipment concentrated in the Southeast and no cyclotrons operating in the Northern part of the country. One of the biggest obstacles during the licensing process is the designation of qualified personnel as operation workers and radiation safety officers. The number of cyclotron accelerators and PET/CT equipment increased in recent years. However, a number of external factors such as the distance from the nuclear medicine centers, and qualified personnel have proved crucial for the economic viability of this type of facility. (author)

  15. Current status of the UCSF second-generation PACS

    Science.gov (United States)

    Huang, H. K.; Arenson, Ronald L.; Wong, Albert W. K.; Bazzill, Todd M.; Lou, Shyhliang A.; Andriole, Katherine P.; Wang, Jun; Zhang, Jianguo; Wong, Stephen T. C.

    1996-05-01

    This paper describes the current status of the second generation PACS at UCSF commenced in October 1992. The UCSF PACS is designed in-house as a hospital-integrated PACS based on an open architecture concept using industrial standards including UNIX operating system, C programming language, X-Window user interface, TCP/IP communication protocol, DICOM 3.0 image standard and HL7 health data format. Other manufacturer's PACS components which conform with these standards can be easily integrated into the system. Relevant data from HIS and RIS is automatically incorporated into the PACS using HL7 data format and TCP/IP communication protocol. The UCSF system also takes advantage of state-of-the-art communication, storage, and software technologies in ATM, multiple storage media, automatic programming, multilevel processes for a better cost-performance system. The primary PACS network is the 155 Mbits/sec OC3 ATM with the Ethernet as the back-up. The UCSF PACS also connects Mt. Zion Hospital and San Francisco VA Medical Center in the San Francisco Bay area via an ATM wide area network with a T1 line as the back-up. Currently, five MR and five CT scanners from multiple sites, two computed radiography systems, two film digitizers, one US PACS module, the hospital HIS and the department RIS have been connected to the PACS network. The image data is managed by a mirrored database (Sybase). The PACS controller, with its 1.3 terabyte optical disk library, acquires 2.5 gigabytes digital data daily. Four 2K, five, 1,600-line multiple monitor display workstations are on line in neuroradiology, pediatric radiology and intensive care units for clinical use. In addition, the PACS supports over 100 Macintosh users in the department and selected hospital sites for both images and textual retrieval through a client/server mechanism. We are also developing a computation and visualization node in the PACS network for advancing radiology research.

  16. Satellite power systems structures: A 1980 technology status review

    Science.gov (United States)

    Greenberg, H. S.

    1980-07-01

    The classes of major structural components and constructions utilized were considered. A review of the current (SPS) structure technology status was made. The major issues considered pertinent to SPS structures are: Cost effective construction, construction materials, structural design requirements, stress and dimensional integrity of as-built structures, and predictability of strength and dynamic behavior. The feasibility of passive figure control approach to MPTS flatness, of structure stiffness compatible with MPTS pointing, of passive control through damping, and the feasibility of space fabrication of ultra-large reflector surfaces are also considered. Qualification, model verification, inspection are considered of vital concern.

  17. Planetary Protection Technology Definition Team: Tasks, Status, and Feedback

    Science.gov (United States)

    Meyer, M. A.; Rummel, J. D.

    2016-10-01

    A Planetary Protection and Technology Definition Team will assess challenges to meeting planetary protection requirements to instruments and will suggest technological solutions. Status and initial findings will be reported.

  18. Status of Propulsion Technology Development Under the NASA In-Space Propulsion Technology Program

    Science.gov (United States)

    Anderson, David; Kamhawi, Hani; Patterson, Mike; Pencil, Eric; Pinero, Luis; Falck, Robert; Dankanich, John

    2014-01-01

    Since 2001, the In-Space Propulsion Technology (ISPT) program has been developing and delivering in-space propulsion technologies for NASA's Science Mission Directorate (SMD). These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, Flagship and sample return missions currently under consideration. The ISPT program is currently developing technology in three areas that include Propulsion System Technologies, Entry Vehicle Technologies, and Systems/Mission Analysis. ISPT's propulsion technologies include: 1) the 0.6-7 kW NASA's Evolutionary Xenon Thruster (NEXT) gridded ion propulsion system; 2) a 0.3-3.9kW Halleffect electric propulsion (HEP) system for low cost and sample return missions; 3) the Xenon Flow Control Module (XFCM); 4) ultra-lightweight propellant tank technologies (ULTT); and 5) propulsion technologies for a Mars Ascent Vehicle (MAV). The NEXT Long Duration Test (LDT) recently exceeded 50,000 hours of operation and 900 kg throughput, corresponding to 34.8 MN-s of total impulse delivered. The HEP system is composed of the High Voltage Hall Accelerator (HIVHAC) thruster, a power processing unit (PPU), and the XFCM. NEXT and the HIVHAC are throttle-able electric propulsion systems for planetary science missions. The XFCM and ULTT are two component technologies which being developed with nearer-term flight infusion in mind. Several of the ISPT technologies are related to sample return missions needs: MAV propulsion and electric propulsion. And finally, one focus of the Systems/Mission Analysis area is developing tools that aid the application or operation of these technologies on wide variety of mission concepts. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness.

  19. Current status and future direction of the MONK software package

    International Nuclear Information System (INIS)

    Smith, Nigel; Armishaw, Malcolm; Cooper, Andrew

    2003-01-01

    The current status of the MONK criticality software package is summarized in terms of recent and current developments and envisaged directions for the future. The areas of the discussion are physics modeling, geometry modeling, source modeling, nuclear data, validation, supporting tools and customer services. In future development plan, MONK continues to be focused on meeting the short and long-term needs of the code user community. (J.P.N.)

  20. Conventional engine technology. Volume 2: Status of diesel engine technology

    Science.gov (United States)

    Schneider, H. W.

    1981-01-01

    The engines of diesel cars marketed in the United States were examined. Prominent design features, performance characteristics, fuel economy and emissions data were compared. Specific problems, in particular those of NO and smoke emissions, the effects of increasing dieselization on diesel fuel price and availability, current R&D work and advanced diesel concepts are discussed. Diesel cars currently have a fuel economy advantage over gasoline engine powered cars. Diesel drawbacks (noise and odor) were reduced to a less objectionable level. An equivalent gasoline engine driveability was obtained with turbocharging. Diesel manufacturers see a growth in the diesel market for the next ten years. Uncertainties regarding future emission regulation may inhibit future diesel production investments. With spark ignition engine technology advancing in the direction of high compression ratios, the fuel economy advantages of the diesel car is expected to diminish. To return its fuel economy lead, the diesel's potential for future improvement must be used.

  1. Hardwood lumber supply chain: current status and market opportunities

    Science.gov (United States)

    Urs Buehlmann; Matthew Bumgardner; Al Schuler; Mark Barford

    2007-01-01

    The membership of the Appalachian Hardwood Manufacturers Association was surveyed in 2005 to determine the current status of large Appalachian sawmills. The primary focus was to assess the impacts of globalization on primary manufacturing, but attention was also paid to general issues affecting the hardwood lumber supply chain-from concerns over forest health and log...

  2. the agincourt field site - evolution and current status

    African Journals Online (AJOL)

    To describe the evolution and current status of the. Agincourt field site ... system. S AfrMed J1999; 89: 853-858. Field sites have been an important part of public health teaching, research and practice since C C Chen's impressive efforts at the Beijing ..... registration has produced a vacuum in monitoring demographic and ...

  3. Current Population Status of the Endangered Endemic Subspecies ...

    African Journals Online (AJOL)

    A study on current population status, sex ratio and age structures of Swayne's hartebeest (Alcelaphus buselaphus swaynei) was carried out during 2009/2010 in Maze National Park. Total count method was used in an area of 220 km2 using well trained park scouts based on silent detection. There were 372 individuals ...

  4. Current status of malaria and urban schistosomiasis infections in the ...

    African Journals Online (AJOL)

    The current statuses of malaria and urban schistosomiasis were assessed amongst the Hausa and Fulani settlers at the 34 Field Artillery Brigade Mammy Market free zone in Obinze, Owerri.Atotal of 150 stool and urine samples were collected randomly from each of the study groups and analysed using standard ...

  5. Current status of quantitative rotational spectroscopy for atmospheric research

    Science.gov (United States)

    Drouin, Brian J.; Wlodarczak, Georges; Colmont, Jean-Marcel; Rohart, Francois

    2004-01-01

    Remote sensing of rotational transitions in the Earth's atmosphere has become an important method for the retrieval of geophysical temperatures, pressures and chemical composition profiles that requires accurate spectral information. This paper highlights the current status of rotational data that are useful for atmospheric measurements, with a discussion of the types the rotational lineshape measurements that are not generally available in either online repository.

  6. Chemical Reaction Engineering: Current Status and Future Directions.

    Science.gov (United States)

    Dudukovic, M. P.

    1987-01-01

    Describes Chemical Reaction Engineering (CRE) as the discipline that quantifies the interplay of transport phenomena and kinetics in relating reactor performance to operating conditions and input variables. Addresses the current status of CRE in both academic and industrial settings and outlines future trends. (TW)

  7. Current status of transrectal ultrasound techniques in prostate cancer

    NARCIS (Netherlands)

    Smeenge, Martijn; de La Rosette, Jean J. M. C. H.; Wijkstra, Hessel

    2012-01-01

    Purpose of review Present the current status of transrectal ultrasound imaging in prostate cancer (PCa) and discuss the latest techniques now under preclinical evaluation. Recent findings Three-dimensional ultrasound and quantification techniques are superior to two-dimensional ultrasound in

  8. Structural Learning Theory: Current Status and New Perspectives.

    Science.gov (United States)

    Scandura, Joseph M.

    2001-01-01

    Presents the current status and new perspectives on the Structured Learning Theory (SLT), with special consideration given to how SLT has been influenced by recent research in software engineering. Topics include theoretical constructs; content domains; structural analysis; cognition; assessing behavior potential; and teaching and learning issues,…

  9. 42 CFR 411.104 - Current employment status.

    Science.gov (United States)

    2010-10-01

    ... employer for more than 6 months, is not receiving disability benefits from Social Security, and has GHP... active employment periods; for example, based on an hours bank arrangement. (Active union members often have hours bank coverage.) (c) Coverage by virtue of current employment status. An individual has...

  10. The Madras Triple Helix: Origins and Current Status

    Indian Academy of Sciences (India)

    Origins and Current Status. Manju Bansal is a. Professor at the Molecu- lar Biophysics Unit,. Indian Institute of. Science, Bangalore. She is involved in computer modelling of the structure and dynamics of biopoly- mers: proteins and nucleic acids, as well as the interactions between them. Analysis of possible correlations.

  11. The Current Status of Teachers and the Teaching Profession in ...

    African Journals Online (AJOL)

    This paper examines the current status of teachers and the teaching sector in Tanzania. It draws on experiences of teachers, parents, and students in Dar es Salaam, Iringa and Mbeya regions. Informed by the qualitative inquiry, the paper is largely empirical in character. Data was sought through interviews and document ...

  12. Special Education History, Current Status and Future: India

    Science.gov (United States)

    Antony, Pavan John

    2013-01-01

    Education of all children in public schools, including those with disabilities, continues to be an unresolved issue in many countries around the globe. While education of all children is mandated by law and considered a basic human right in many countries, the current status of implementation varies. India, for example, is an ancient country that…

  13. Counseling in Malaysia: History, Current Status, and Future Trends

    Science.gov (United States)

    See, Ching Mey; Ng, Kok-Mun

    2010-01-01

    This article presents an overview of the history of counseling in Malaysia, provides an update of its current status, and discusses some anticipated future trends for the profession in light of recent developments in the country. Counseling in Malaysia began with school guidance in the 1960s and has now achieved recognition as a profession in…

  14. Current status of radiation treatment of water and wastewater

    International Nuclear Information System (INIS)

    Pikaev, A.K.

    1997-01-01

    This is a brief review of the current status of radiation treatment of surface water, groundwater, wastewaters, and sewage sludges. Sources of ionizing radiation, and combination radiation methods for purification are described in some detail. Special attention is paid to pilot and industrial facilities. (author)

  15. Technology readiness levels and technology status for selected long term/high payoff technologies on the RLV program

    Science.gov (United States)

    Rosmait, Russell L.

    1996-01-01

    The development of a new space transportation system in a climate of constant budget cuts and staff reductions can be and is a difficult task. It is no secret that NASA's current launching system consumes a very large portion of NASA funding and requires a large army of people to operate & maintain the system. The new Reusable Launch Vehicle (RLV) project and it's programs are faced with a monumental task of making the cost of access to space dramatically lower and more efficient than NASA's current system. With pressures from congressional budget cutters and also increased competition and loss of market share from international agencies RLV's first priority is to develop a 'low-cost, reliable transportation to earth orbit.' One of the RLV's major focus in achieving low-cost, reliable transportation to earth orbit is to rely on the maturing of advanced technologies. The technologies for the RLV are numerous and varied. Trying to assess their current status, within the RLV development program is paramount. There are several ways to assess these technologies. One way is through the use of Technology Readiness Levels (TRL's). This project focused on establishing current (summer 95) 'worst case' TRL's for six selected technologies that are under consideration for use within the RLV program. The six technologies evaluated were Concurrent Engineering, Embedded Sensor Technology, Rapid Prototyping, Friction Stir Welding, Thermal Spray Coatings, and VPPA Welding.

  16. Diamond Detector Technology: Status and Perspectives

    CERN Document Server

    Reichmann, M; Artuso, M; Bachmair, F; Bäni, L; Bartosik, M; Beacham, J; Beck, H; Bellini, V; Belyaev, V; Bentele, B; Berdermann, E; Bergonzo, P; Bes, A; Brom, J-M; Bruzzi, M; Cerv, M; Chiodini, G; Chren, D; Cindro, V; Claus, G; Collot, J; Cumalat, J; Dabrowski, A; D'Alessandro, R; Dauvergne, D; de Boer, W; Dorfer, C; Dünser, M; Eremin, V; Eusebi, R; Forcolin, G; Forneris, J; Frais-Kölbl, H; Gallin-Martel, L; Gallin-Martel, M L; Gan, K K; Gastal, M; Giroletti, C; Goffe, M; Goldstein, J; Golubev, A; Gorišek, A; Grigoriev, E; Grosse-Knetter, J; Grummer, A; Gui, B; Guthoff, M; Haughton, I; Hiti, B; Hits, D; Hoeferkamp, M; Hofmann, T; Hosslet, J; Hostachy, J-Y; Hügging, F; Hutton, C; Jansen, H; Janssen, J; Kagan, H; Kanxheri, K; Kasieczka, G; Kass, R; Kassel, F; Kis, M; Konovalov, V; Kramberger, G; Kuleshov, S; Lacoste, A; Lagomarsino, S; Lo Giudice, A; Lukosi, E; Maazouzi, C; Mandic, I; Mathieu, C; Menichelli, M; Mikuž, M; Morozzi, A; Moss, J; Mountain, R; Murphy, S; Muškinja, M; Oh, A; Oliviero, P; Passeri, D; Pernegger, H; Perrino, R; Picollo, F; Pomorski, M; Potenza, R; Quadt, A; Re, A; Riley, G; Roe, S; Sanz-Becerra, D A; Scaringella, M; Schaefer, D; Schmidt, C J; Schnetzer, S; Sciortino, S; Scorzoni, A; Seidel, S; Servoli, L; Smith, S; Sopko, B; Sopko, V; Spagnolo, S; Spanier, S; Stenson, K; Stone, R; Sutera, C; Tannenwald, B; Taylor, A; Traeger, M; Tromson, D; Trischuk, W; Tuve, C; Uplegger, L; Velthuis, J; Venturi, N; Vittone, E; Wagner, S; Wallny, R; Wang, J C; Weingarten, J; Weiss, C; Wengler, T; Wermes, N; Yamouni, M; Zavrtanik, M

    2018-01-01

    The planned upgrade of the LHC to the High-Luminosity-LHC will push the luminosity limits above the original design values. Since the current detectors will not be able to cope with this environment ATLAS and CMS are doing research to find more radiation tolerant technologies for their innermost tracking layers. Chemical Vapour Deposition (CVD) diamond is an excellent candidate for this purpose. Detectors out of this material are already established in the highest irradiation regimes for the beam condition monitors at LHC. The RD42 collaboration is leading an effort to use CVD diamonds also as sensor material for the future tracking detectors. The signal behaviour of highly irradiated diamonds is presented as well as the recent study of the signal dependence on incident particle flux. There is also a recent development towards 3D detectors and especially 3D detectors with a pixel readout based on diamond sensors.

  17. SIM-Planetquest Mission : overview and current status

    Science.gov (United States)

    Marr IV, James C.

    2005-01-01

    This paper provides a broad overview of the SIM-PlanetQuest Mission, covering: history, science objectives, key top level requirements, how the mission will be implemented (technical and programmatic), technology development status, an assessment of where the project is today, and prognosis for the future. SIM-PlanetQuest supports the U.S. President's Vision for Space Exploration and is supported by the U.S. National Academy of Sciences.

  18. Epilepsy misconceptions and stigma reduction: Current status in Western countries.

    Science.gov (United States)

    Herrmann, Lynn K; Welter, Elisabeth; Berg, Anne T; Perzynski, Adam T; Van Doren, Jamie R; Sajatovic, Martha

    2016-07-01

    This systematized literature review identified reports describing epilepsy misconceptions in the developed Western countries and research interventions focused on reducing these misconceptions. English language publications from January 2004 to January 2015 that described original research conducted in Europe, North/Central/South America, or Australia on misconceptions about epilepsy among the general public were used for this review. Eighty-one publications were selected. Most studies were conducted in the Americas (N=30) and Europe (N=31). Misconceptions and attitudes about epilepsy were assessed among clinical providers (N=9), family members of people with epilepsy (PWE) (N=5), teachers (N=11), students (N=22), and the general public (N=25). Most studies used structured questionnaires, sometimes adding open-ended questions. Misconceptions reflected socially exclusionary attitudes directed at PWE, ignorance about treatment, and overgeneralizations that are stigmatizing when applied to all PWE. Misconceptions were more prevalent in those with less education, lower socioeconomic status, and no exposure to PWE. There were only 12 intervention studies. While intervention studies were generally effective in improving attitudes, many were targeted to healthcare and education settings, were time-intensive, and impractical for broad general population implementation. None incorporated newer technology-based strategies regarding effective health communication approaches. Types of epilepsy misconceptions were similar in reports published over the last decade, although most referred to misconceptions that have already been previously described. Existing questionnaires may fail to identify more subtle forms of current misconceptions and negative attitudes. Few interventional studies specifically target epilepsy stigma. Practical and broad scalable approaches to destigmatize epilepsy may help reduce misconceptions. Copyright © 2016 Elsevier Inc. All rights reserved.

  19. Current Status of Nursing Informatics Education in Korea.

    Science.gov (United States)

    Jeon, Eunjoo; Kim, Jeongeun; Park, Hyeoun-Ae; Lee, Ji-Hyun; Kim, Jungha; Jin, Meiling; Ahn, Shinae; Jun, Jooyeon; Song, Healim; On, Jeongah; Jung, Hyesil; Hong, Yeong Joo; Yim, Suran

    2016-04-01

    This study presents the current status of nursing informatics education, the content covered in nursing informatics courses, the faculty efficacy, and the barriers to and additional supports for teaching nursing informatics in Korea. A set of questionnaires consisting of an 18-item questionnaire for nursing informatics education, a 6-item questionnaire for faculty efficacy, and 2 open-ended questions for barriers and additional supports were sent to 204 nursing schools via email and the postal service. Nursing schools offering nursing informatics were further asked to send their syllabuses. The subjects taught were analyzed using nursing informatics competency categories and other responses were tailed using descriptive statistics. A total of 72 schools (35.3%) responded to the survey, of which 38 reported that they offered nursing informatics courses in their undergraduate nursing programs. Nursing informatics courses at 11 schools were taught by a professor with a degree majoring in nursing informatics. Computer technology was the most frequently taught subject (27 schools), followed by information systems used for practice (25 schools). The faculty efficacy was 3.76 ± 0.86 (out of 5). The most frequently reported barrier to teaching nursing informatics (n = 9) was lack of awareness of the importance of nursing informatics. Training and educational opportunities was the most requested additional support. Nursing informatics education has increased during the last decade in Korea. However, the proportions of faculty with degrees in nursing informatics and number of schools offering nursing informatics courses have not increased much. Thus, a greater focus is needed on training faculty and developing the courses.

  20. CMS Data Analysis: Current Status and Future Strategy

    CERN Document Server

    Innocente, V

    2003-01-01

    We present the current status of CMS data analysis architecture and describe work on future Grid-based distributed analysis prototypes. CMS has two main software frameworks related to data analysis: COBRA, the main framework, and IGUANA, the interactive visualisation framework. Software using these frameworks is used today in the world-wide production and analysis of CMS data. We describe their overall design and present examples of their current use with emphasis on interactive analysis. CMS is currently developing remote analysis prototypes, including one based on Clarens, a Grid-enabled client-server tool. Use of the prototypes by CMS physicists will guide us in forming a Grid-enriched analysis strategy. The status of this work is presented, as is an outline of how we plan to leverage the power of our existing frameworks in the migration of CMS software to the Grid.

  1. HTGR technology development: status and direction

    International Nuclear Information System (INIS)

    Kasten, P.R.

    1982-01-01

    During the last two years there has been an extensive and comprehensive effort expended primarily by General Atomic (GA) in generating a revised technology development plan. Oak Ridge National Laboratory (ORNL) has assisted in this effort, primarily through its interactions over the past years in working together with GA in technology development, but also through detailed review of the initial versions of the technology development plan as prepared by GA. The plan covers Fuel Technology, Materials Technology (including metals, graphite, and ceramics), Plant Technology (including methods, safety, structures, systems, heat exchangers, control and electrical, and mechanical), and Component Design Verification and Support areas

  2. Application of digital PWM technology in current transducers

    International Nuclear Information System (INIS)

    Liu Huifang; Hu Zhimin; Li Rui

    2012-01-01

    With the development of DSP technology and mature use of PID technology,, a new program for DC or AC signal measurement is proposed. Combined with the DSP chip timer module and PID algorithm, PWM signals are generated to control the feedback circuit for the compensation current. Finally the measured current value can be obtained according to the ampere-turns compensation current and the measured current. Studies have shown that this technology enables new current transducers have high stability. (authors)

  3. Current Technology of the Lightning Mapping Array

    Science.gov (United States)

    Rodeheffer, D.; Rison, W.; Krehbiel, P. R.; Edens, H. E.; Thomas, R. J.

    2013-12-01

    The Lightning Mapping Array (LMA) is continuing to be developed technology-wise, involving both hardware configurations and software, to further simplify the deployment, operation and sensitivity of networks. This has included developing stations that operate on a complete standalone basis, utilizing battery backed-up solar power and cell phone data modems for connecting into the internet. Solid state disks not requiring cooling are used for onsite data storage, allowing the electronics to be housed in an RF-tight enclosure and the VHF receiving antenna to be co-located immediately above the station electronics, rather than 50 to 100 feet away. The combined changes enable stations to be placed in remote, RF-quiet locations for excellent sensitivity, and to have only a 4'x 4' freestanding footprint on the ground for ease of deployment. Networks that take advantage of the solar/cell modem design are the West Texas LMA (Texas Tech University), the Houston LMA (Texas A&M), and the North Colorado LMA (NMT/CSU), initially utilized in the 2012 DC3 atmospheric chemistry program. A similar network (operated in conjunction with NASA/MSFC) was set up on a temporary basis in Southern France leading up to the HyMeX field program in September and October of 2012. Each of the above networks is remotely monitored via the internet and feeds its data on a minute-by-minute basis back to a central processing computer at NM Tech (or TTU), where it is processed in real time and posted on the web in the two- and ten-minute time intervals. Examples of archived and current realtime data for the North Colorado LMA can be seen at http://lightning.nmt.edu/colma/ and /colma/current/. Finally, based on successful experiences with the above networks, we have developed what is termed the 'Sitetest' network, consisting of 9 or 10 stations each mounted on wooden pallets with lightweight enclosures and simple antenna hardware. The network was initially operated at Kennedy Space Center to test out

  4. An Evaluative Report on the Current Status of Parapsychology

    Science.gov (United States)

    1986-05-01

    00 i Research Note 86-63 AN EVALUATIVE REPORT ON THE CURRENT STATUS OF PARAPSYCHOLOGY John Palmer Parapsychology Laboratory, University of Utrecht... Parapsychology Laboratory, University of Utrecht Utrecht, The Netherlands -p Technical review by Steve Kronheim ’(. :.This report has been cleared for...grant. My Research Assistant, Debra H. Weiner, has been involved in the field of parapsychology for 9 years and has contributed numerous articles to

  5. Current Status of Nursing Informatics Education in Korea

    OpenAIRE

    Jeon, Eunjoo; Kim, Jeongeun; Park, Hyeoun-Ae; Lee, Ji-Hyun; Kim, Jungha; Jin, Meiling; Ahn, Shinae; Jun, Jooyeon; Song, Healim; On, Jeongah; Jung, Hyesil; Hong, Yeong Joo; Yim, Suran

    2016-01-01

    Objectives This study presents the current status of nursing informatics education, the content covered in nursing informatics courses, the faculty efficacy, and the barriers to and additional supports for teaching nursing informatics in Korea. Methods A set of questionnaires consisting of an 18-item questionnaire for nursing informatics education, a 6-item questionnaire for faculty efficacy, and 2 open-ended questions for barriers and additional supports were sent to 204 nursing schools via ...

  6. Current status of preimplantation genetic diagnosis in Japan

    OpenAIRE

    Sato, Kenji; Sueoka, Kou; Iino, Kotaro; Senba, Hiroshi; Suzuki, Mariko; Mizuguchi, Yuki; Izumi, Yoko; Sato, Suguru; Nakabayashi, Akira; Tanaka, Mamoru

    2015-01-01

    This is a retrospective study aimingto clarify the current status of preimplantation genetic diagnosis (PGD) in Japan. Our data were collected from 12 facilities between September 2004 and September 2012, and entered into a database. A majority of PGD in Japan was performed for balanced structural chromosomal abnormalities in couples with recurrent miscarriage. PGD for monogenic diseases was performed only in two facilities. The average maternal age was 38 years for monogenic diseases and 40 ...

  7. Current status on narrow N anti N states

    International Nuclear Information System (INIS)

    Chung, S.U.

    1979-09-01

    An attempt is made to summarize the experimental status of narrow B anti B states as of mid-1979. In particular, concentration is placed on the current experimental situations and prospects regarding three serious contenders for the so-called baryonium states. Theoretical concepts of baryoniums, narrow N anti N states known as S(1935), anti pp(2020), and anti pp(2204), and some forthcoming results, and problems of the above three resonances are discussed. 31 references

  8. Current status of quality assurance of treatment planning systems

    International Nuclear Information System (INIS)

    Mijnheer, B.J.

    1997-01-01

    A review is given of the current status of quality assurance of treatment planning systems. At this moment only one comprehensive report is available. In order to review national activities a questionnaire has been distributed amongst national societies of medical physicists. From the 23 responding countries, 8 indicated that only limited efforts are underway, 8 answered that a working group is evaluating their specific national requirements while in 5 countries a document is drafted. The highlights of these reports have been summarized. (author)

  9. CURRENT STATUS AND POLICY IMPLICATIONS FOR FOSTERING SOCIAL ENTREPRENEUR

    OpenAIRE

    Yoon-Doo Kim; Seok Yoon

    2012-01-01

    In this study, problems in current status of social entrepreneurs in Korea were examined and further policy issues for them were suggested as well. For the methodology, the study analyzed the drawbacks and policy implication of fostering social entrepreneurs through Focus Group Interview (FGI) on analysis of present condition of incubating social entrepreneur and programs for it. First, it should escape from personnel expense-centered one and convert to ecosystem-centered or division-centered...

  10. CT colonography: current status in Europe and future perspectives

    International Nuclear Information System (INIS)

    Lefere, P.; Gryspeerdt, S.; Yoshida, H.

    2007-01-01

    In this article, we review the current status of CT colonography (CTC) in Europe and future perspectives of CTC including fecal tagging and CAD. There are several large multi-centre studies that have been initiated. Fecal tagging has gradually become a prerequisite to perform state-of-the-art CTC. However, CAD for fecal-tagging CTC remains a subject for future research. (orig.)

  11. Current Status of Single-incision Laparoscopic Surgery

    DEFF Research Database (Denmark)

    Ahmed, Irfan; Ciancio, Fabio; Ferrara, Vincenzo

    2012-01-01

    Recent advances in minimally invasive surgery have centered on reducing the number of incisions required, which has led to the development of the single-incision laparoscopic technique. A panel of European single-incision laparoscopy experts met to discuss the current status of, and the future ex...... to be published to confirm its value. An ideal training route for surgeons who are adopting the technique was agreed upon, as was the need for a single, large clinical registry of data....

  12. Nuclear liability legislation in Russia - current status and expected developments

    International Nuclear Information System (INIS)

    Karpov, A. E.; Borisov, D. G.

    2000-01-01

    Present report is provided by the experts of the Russian insurance business, a company member of the Russian Nuclear Pool, and not the experts of the Ministry of Atomic Energy of Russian Federation (RF Minatom). Considering the above, the following document will outline the current status of nuclear liability legislation and insurance in Russia from a viewpoint of the insurance companies and not RF Minatom. (author)

  13. Review of the current status of radiation risk estimates

    International Nuclear Information System (INIS)

    Charles, M.W.; Little, M.P.

    1988-10-01

    This report reviews the current status of radiation risk estimation for low linear energy transfer radiation. Recent statements by various national and international organisations regarding risk estimates are critically discussed. The recently published revised population risk estimates from the study of Japanese bomb survivors are also reviewed and used with some unpublished data from Japan to calculate risk figures for a general work force. (author)

  14. Current status of acupuncture and moxibustion in China

    OpenAIRE

    Lim, Min Yee; Huang, Jian; Zhao, Baixiao; Ha, Lue

    2015-01-01

    Acupuncture and moxibustion are more integrated in the Chinese healthcare system than in the national healthcare systems of other countries. Development of acupuncture and moxibustion in China is making progress in this field. For overseas researchers, this commentary offers perspectives on the current status of acupuncture and moxibustion in China and examines relevant opportunities and challenges in healthcare reforms. There has been a steady increase in the number of undergraduates and pos...

  15. Current status of orthodontic professionals in the Asian Pacific region

    Directory of Open Access Journals (Sweden)

    Kazuo Tanne

    2016-01-01

    Full Text Available Asian Pacific Orthodontic Society (APOS was developed in Tokyo on October 1, 2001. Currently, APOS has grown up to a scientific association specified to orthodontics with 18 affiliated societies. However, the status of orthodontic professionals in each society remains unclear beyond our understanding. To this end, I have recently conducted an internet interview to the representatives of affiliated societies. The questionnaire includes the educational system for dentists and orthodontists, the number of orthodontic departments with post-graduate programs, the number of orthodontists or members of each society, orthodontic treatment fee on average, the prevalence of CLP and the treatment, orthodontic treatment for jaw deformity patients, current status of orthodontic treatment with lingual appliances and TADs, important issues for orthodontic specialists, future plans of each society. It is hopefully anticipated that the current status of orthodontic professionals in the Asian Pacific region are well understood by all the APOS members and will become a great benefit for the development of all the affiliate societies.

  16. Current status of neutron scattering facilities in Serpong

    International Nuclear Information System (INIS)

    Ikram, Abarrul

    1999-01-01

    Brief explanation of the research reactor as a neutron source is presented together with its current operation mode. The neutron beam facilities include one diffractometer for residual stress measurement, one diffractometer for single crystal structural determination and texture measurement, one high resolution powder diffractometer, one neutron radiography facility, one triple axis spectrometer, one small angle neutron scattering spectrometer and one high resolution small angle neutron scattering spectrometer. Current status of three instruments mostly related to this workshop, their performances and problems faced in the last year are presented as well as the future plan for refurbishment and development. (author)

  17. Current status and perspectives of cysticercosis and taeniasis in Japan.

    Science.gov (United States)

    Yamasaki, Hiroshi

    2013-02-01

    This mini-review describes recent epidemiological trends in cysticercosis and taeniasis in Japan. Some of the topics discussed herein were presented at the first symposium on "Current perspectives of Taenia asiatica researches", that was held in Osong in Chungbuk Province, South Korea, in October 2011 and organized by Prof. K. S. Eom, Chungbuk National University School of Medicine. To better understand the trends in the occurrence of cysticercosis and taeniasis in Japan, clinical cases reported in 2005 have been updated. In addition, the current status of Taenia asiatica infections successively occurring in Japan since 2010 is also discussed.

  18. Current Renewable Energy Technologies and Future Projections

    Energy Technology Data Exchange (ETDEWEB)

    Allison, Stephen W [ORNL; Lapsa, Melissa Voss [ORNL; Ward, Christina D [ORNL; Smith, Barton [ORNL; Grubb, Kimberly R [ORNL; Lee, Russell [ORNL

    2007-05-01

    The generally acknowledged sources of renewable energy are wind, geothermal, biomass, solar, hydropower, and hydrogen. Renewable energy technologies are crucial to the production and utilization of energy from these regenerative and virtually inexhaustible sources. Furthermore, renewable energy technologies provide benefits beyond the establishment of sustainable energy resources. For example, these technologies produce negligible amounts of greenhouse gases and other pollutants in providing energy, and they exploit domestically available energy sources, thereby reducing our dependence on both the importation of fossil fuels and the use of nuclear fuels. The market price of renewable energy technologies does not reflect the economic value of these added benefits.

  19. [Assisted reproductive technologies and the embryo status].

    Science.gov (United States)

    Englert, Y

    The status of the human embryo has always be a subject of philosophical and theological thoughts with major social consequences, but, until the 19th century, it has been mainly an abstraction. The arrival of the human embryo in vitro, materialized by Louise Brown's birth in 1978 and above all by the supernumerary embryos produced by the Australian team of Trounson and Wood following the introduction of ovarian stimulation, will turn theoretical thoughts into a reality. Nobody may ignore the hidden intentions behind the debate, as to recognise a status to a few days old embryo will immediately have a major impact on the status of a few weeks old foetus and therefore on the abortion rights. We will see that the embryo status, essentially based as well on a vision on the good and evil as on social order, cannot be based on a scientific analysis of the reproduction process but comes from a society's choice, by essence " arbitrary " and always disputable. This does not preclude the collectivity right and legitimacy to give a precise status and it is remarkable to observe the law is careful not to specify which status to give to the human embryo. It is more thru handling procedures and functioning rules that the law designed the embryo position, neither with a status of a person, nor of a thing. It nevertheless remains true that there is a constant risk that the legislation gives the embryo a status that would call into question it's unique characteristic of early reproductive stage, jeopardizing at once the hard-won reproductive freedom (reproductive choice) as well as freedom of research on embryonic stem cells, one of the most promising field of medical research.

  20. [Development of antituberculous drugs: current status and future prospects].

    Science.gov (United States)

    Tomioka, Haruaki; Namba, Kenji

    2006-12-01

    and drug regimens for anti-TB chemotherapy. There are a number of difficulties in drug-design for the development of new drug formulations with increased potential for antimycobacterial effects, excellent pharmacokinetics, and tolerability. It should be emphasized that the most urgent goal of chemotherapy of TB and MAC infections, especially that associated with HIV infection, is to develop highly active, low-cost drugs which can be used not only in industrialized countries but also in developing countries, since the incidences of AIDS-associated intractable TB and MAC infections are rapidly increasing in the latter. We strongly wish a great advance of fundametal and practical studies in developing such kinds of new anti-TB drugs in the near future. 1. Prospects for non-clinical or clinical development of new antituberculous drugs in relation to corporate strategy: Kenji NAMBA (New Product Research Laboratories I, Daiichi Pharmaceutical Co., Ltd.) Tuberculosis (TB) remains one of the deadliest threats to public health. No new anti-TB drugs have been brought into the clinic in the past 40 years. Current non-clinical works with progressed technology and Global Alliance for TB Drug Development, a non-profit organization established in 2000, accelerate research and development of faster-acting anti-TB compounds. We reviewed the status of new types of compounds which are being developed as anti-TB drug, such as diarylquinoline (TMC 207), nitroimidazole (PA-824 and OPC-67683), and moxifloxacin (MFLX). We also discussed the best clinical development plans for new-TB drugs in relation to corporate strategy. 2. Exploring novel drug targets through the chemical genomics approach and its possible application to the development of anti-tuberculosis drugs: Yorimasa SUWA (Reverse Proteomics Research Institute Co., Ltd.), Yohji SUZUKI (Teijin Ltd.) Recently, chemical genomics approach has been focused as an emerging technology for the drug discovery. In advance to a very large scale

  1. Technology Status of Thermionic Fuel Elements for Space Nuclear Power

    Science.gov (United States)

    Holland, J. W.; Yang, L.

    1984-01-01

    Thermionic reactor power systems are discussed with respect to their suitability for space missions. The technology status of thermionic emitters and sheath insulator assemblies is described along with testing of the thermionic fuel elements.

  2. Current status and challenge of Human Parasitology teaching in China.

    Science.gov (United States)

    Peng, Hong-Juan; Zhang, Chao; Wang, Chun-Mei; Chen, Xiao-Guang

    2012-11-01

    Parasitic infection profile in China has been changed greatly with the rapid economic development in China since the 1980s, such as the tremendous decreased infection rate of the soil-borne helminthiasis, the elimination of filariasis, the control of malaria, and the initiation to eradicate malaria in 2020. Some food-borne parasitic infections have increased such as Clonorchiasis, Cysticercosis, and Echinococcosis, probably because of the increased chances of eating out. This trend directly affected the status of Human Parasitology teaching in medical universities, such as the shorten length of this course, re-adjusted contents structure and teaching manners, even the change of the name of this course. In this paper, we analyzed the current status and challenges of Human Parasitology teaching in medical universities, and discussed the requisite contents and manners in course delivery and measures to improve the quality of Human Parasitology teaching in China.

  3. Overview of the photovoltaic technology status and perspective in Spain

    International Nuclear Information System (INIS)

    Salas, V.; Olias, E.

    2009-01-01

    The aim of this paper is to show the current status of photovoltaic technology and the outlook for the coming years in Spain. In this way, first it gives an account of the cumulative photovoltaic power installed, the number of installations and its distribution data. Afterwards it analyses the photovoltaic implementation by assessing the significance of major projects, such as demonstration projects and photovoltaic solar farms (which use conventional and concentration photovoltaic panels). Likewise it draws attention to photovoltaic research and development activities carried out nowadays. In addition it touches on issues such as photovoltaic industry (solar silicon, cells and modules companies), new initiatives and measures of support (focusing on feed-in tariff system). Finally it lays emphasis on prospects for the coming years. (author)

  4. The current status of wind energy in Turkey and in the world

    Energy Technology Data Exchange (ETDEWEB)

    Ilkilic, Cumali [Department of Automotive, Faculty of Technical Education, Firat University, Elazig 23119 (Turkey); Aydin, Hueseyin; Behcet, Rasim [Department of Automotive, Faculty of Technical Education, Batman University, Batman 72060 (Turkey)

    2011-02-15

    The rapid increase in world energy demand, the depletion of conventional energy sources and the pollution caused by conventional fuels have increased the importance of developing new and renewable energy sources. Additionally, technological developments have resulted in increased energy demand for the entire world, including Turkey, especially for electrical energy. At present, wind energy is receiving considerable attention. This report focuses on the current status of wind energy in Turkey and in the world. An overview of wind energy in Turkey is presented, and its current status, application, support mechanisms and associated legislation in Turkey are described. Wind energy and its status in the world are also addressed. It can be concluded from this analysis that wind energy utilization in Turkey and throughout world has sharply increased. Turkey has an abundance of wind energy sources. (author)

  5. Technology Thresholds for Microgravity: Status and Prospects

    Science.gov (United States)

    Noever, D. A.

    1996-01-01

    The technological and economic thresholds for microgravity space research are estimated in materials science and biotechnology. In the 1990s, the improvement of materials processing has been identified as a national scientific priority, particularly for stimulating entrepreneurship. The substantial US investment at stake in these critical technologies includes six broad categories: aerospace, transportation, health care, information, energy, and the environment. Microgravity space research addresses key technologies in each area. The viability of selected space-related industries is critically evaluated and a market share philosophy is developed, namely that incremental improvements in a large markets efficiency is a tangible reward from space-based research.

  6. Australian shellfish ecosystems: Past distribution, current status and future direction.

    Science.gov (United States)

    Gillies, Chris L; McLeod, Ian M; Alleway, Heidi K; Cook, Peter; Crawford, Christine; Creighton, Colin; Diggles, Ben; Ford, John; Hamer, Paul; Heller-Wagner, Gideon; Lebrault, Emma; Le Port, Agnès; Russell, Kylie; Sheaves, Marcus; Warnock, Bryn

    2018-01-01

    We review the status of marine shellfish ecosystems formed primarily by bivalves in Australia, including: identifying ecosystem-forming species, assessing their historical and current extent, causes for decline and past and present management. Fourteen species of bivalves were identified as developing complex, three-dimensional reef or bed ecosystems in intertidal and subtidal areas across tropical, subtropical and temperate Australia. A dramatic decline in the extent and condition of Australia's two most common shellfish ecosystems, developed by Saccostrea glomerata and Ostrea angasi oysters, occurred during the mid-1800s to early 1900s in concurrence with extensive harvesting for food and lime production, ecosystem modification, disease outbreaks and a decline in water quality. Out of 118 historical locations containing O. angasi-developed ecosystems, only one location still contains the ecosystem whilst only six locations are known to still contain S. glomerata-developed ecosystems out of 60 historical locations. Ecosystems developed by the introduced oyster Crasostrea gigas are likely to be increasing in extent, whilst data on the remaining 11 ecosystem-forming species are limited, preventing a detailed assessment of their current ecosystem-forming status. Our analysis identifies that current knowledge on extent, physical characteristics, biodiversity and ecosystem services of Australian shellfish ecosystems is extremely limited. Despite the limited information on shellfish ecosystems, a number of restoration projects have recently been initiated across Australia and we propose a number of existing government policies and conservation mechanisms, if enacted, would readily serve to support the future conservation and recovery of Australia's shellfish ecosystems.

  7. Individual Monitoring and Occupational Dose Record Management in China: History, Current Status and Perspectives.

    Science.gov (United States)

    Wang, Hong-Bo; Yu, Hai-Tao; Sun, Quan-Fu

    2016-06-03

    This review paper presents an overview of individual monitoring, as well as the national dose register and dose record management of radiation workers in China. Progress has recently been made on the individual monitoring of radiation workers. A critical analysis of current status and problems in individual monitoring is also presented and necessary future research on individual monitoring, such as the monitoring technology in the form of the ring dosimeters and eye lens dosimeters, is suggested.

  8. SP-100 status and technology accomplishments

    International Nuclear Information System (INIS)

    Armijo, J.S.

    1989-01-01

    There are many space missions that require electric power in the 10-kW(electric) to 1-MW(electric) range. The SP-100 program will provide technology that demonstrates that a nuclear reactor heat source and passive thermoelectric conversion can reliably provide electrical power over this full range for 10 yr. Based on the generic flight system (GFS) design at 100 kW(electric), tests will be conducted to demonstrate that technologies required for the GFS have been validated. In addition, system-level tests will show that the GFS design and predictive capability to design at other power levels are well understood and meet an enveloping set of requirements. Technology and component testing has begun at General Electric (GE), its subcontractors, and several national laboratories. This paper reviews the significant progress made to date and major planned future tests with respect to the reference flight system, technology and component achievements, and nuclear assembly and integrated assembly tests

  9. Status of technology for nuclear waste management

    International Nuclear Information System (INIS)

    Lieberman, J.A.

    1984-01-01

    In the area of low- and intermediate-level radioactive wastes the successful development and application of specific management technologies have been demonstrated over the years. The major area in which technology remains to be effectively implemented is in the management of high-level wastes from the nuclear fuel cycle. Research and development specifically directed at the management of high-level radioactive wastes in the USA and other countries is briefly reviewed in the article introduced

  10. Current Status of Operation and Management of Dental School Clinics.

    Science.gov (United States)

    Reinhardt, John W

    2017-08-01

    This article summarizes the current status of the operation and management of dental school clinics as schools strive to provide excellent patient-centered care in an environment that is educationally sound, efficient, and financially strong. Clinical education is a large component of dental education and an area in which many dental schools have an opportunity to enhance revenue. Clinical efficiencies and alternative models of clinical education are evolving in U.S. dental schools, and this article describes some of those evolutionary changes. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

  11. Hepatitis B Virus Infection in Tanzania: Current Status and Challenges

    Directory of Open Access Journals (Sweden)

    Semvua B. Kilonzo

    2018-01-01

    Full Text Available Hepatitis B is one of the most common infectious diseases in the world with high prevalence in most of sub-Saharan Africa countries. The complexity in its diagnosis and treatment poses a significant management challenge in the resource-limited settings including Tanzania, where most of the tests and drugs are either unavailable or unaffordable. This mini review aims at demonstrating the current status of the disease in the country and discussing the concomitant challenges in diagnosis, treatment, and prevention.

  12. Current status of large-scale cryogenic gravitational wave telescope

    International Nuclear Information System (INIS)

    Kuroda, K; Ohashi, M; Miyoki, S; Uchiyama, T; Ishitsuka, H; Yamamoto, K; Kasahara, K; Fujimoto, M-K; Kawamura, S; Takahashi, R; Yamazaki, T; Arai, K; Tatsumi, D; Ueda, A; Fukushima, M; Sato, S; Nagano, S; Tsunesada, Y; Zhu, Zong-Hong; Shintomi, T; Yamamoto, A; Suzuki, T; Saito, Y; Haruyama, T; Sato, N; Higashi, Y; Tomaru, T; Tsubono, K; Ando, M; Takamori, A; Numata, K; Aso, Y; Ueda, K-I; Yoneda, H; Nakagawa, K; Musha, M; Mio, N; Moriwaki, S; Somiya, K; Araya, A; Kanda, N; Telada, S; Tagoshi, H; Nakamura, T; Sasaki, M; Tanaka, T; Oohara, K; Takahashi, H; Miyakawa, O; Tobar, M E

    2003-01-01

    The large-scale cryogenic gravitational wave telescope (LCGT) project is the proposed advancement of TAMA, which will be able to detect the coalescences of binary neutron stars occurring in our galaxy. LCGT intends to detect the coalescence events within about 240 Mpc, the rate of which is expected to be from 0.1 to several events in a year. LCGT has Fabry-Perot cavities of 3 km baseline and the mirrors are cooled down to a cryogenic temperature of 20 K. It is planned to be built in the underground of Kamioka mine. This paper overviews the revision of the design and the current status of the R and D

  13. Laparoscopic surgery for inguinal hernia: Current status and controversies

    Directory of Open Access Journals (Sweden)

    Bhandarkar Deepraj

    2006-01-01

    Full Text Available Repair of inguinal hernia is one of the commonest operations performed by surgeons around the world. The treatment of this common problem has seen an evolution from the pure tissue repairs to the prosthetic repairs and in the recent past to laparoscopic repair. The fact that so many hernia repairs are practiced is a testimony to the fact that probably none is distinctly superior to the other. This review assesses the current status of surgery for repair of inguinal hernia and examines the various controversial issues surrounding the subject.

  14. Current development status of advanced pressurized water reactors (APWRs)

    International Nuclear Information System (INIS)

    Seifritz, W.; Chawla, R.

    1985-08-01

    The current development status of advanced (high converting) pressurized water reactors (APWRs) is briefly reviewed. The areas covered are: reactor physics, thermohydraulics and other technical aspects, as well as electricity generating costs and longterm reactor strategical considerations related to the APWR's role in a plutonium economy. There does not seem to be any unsurmountable technical obstacle to the realization of an APWR. However, substantial further R and D efforts are required if an APWR is to go into commercial operation by the end of the century. (author)

  15. Indirect dark matter searches: current status and perspectives

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    Many theoretical ideas for the particle nature of dark matter exist. The  most popular models often predict that dark matter particles self-annihilate or decay, giving rise to potentially detectable signatures in astronomical observations.  I will summarize the current status of searches for such signatures and critically reassess recent claims for dark matter signals.  I will further provide an outlook on anticipated developments in the next 10 years, and discuss new methods to facilitate strategy development.

  16. Current status and some aspects of the future energy strategy

    International Nuclear Information System (INIS)

    Antic, D. P.; Sokcic-Kostic, M. S. . E-mail address of corresponding author: dragon@vin.bg.ac.yu; Antic, D.)

    2005-01-01

    Current status of the energy production and of the energy sources in the world, European Union, Serbia and Montenegro and the Balkan states is analyzed. Some trends in the energy consumption and productions in some European states are analyzed. Some problems of the Serbia and Montenegro energy production system are compared with situation in neighbor states, Germany, and European Union. At present, anywhere in the world, the nuclear power in on the defensive. In some countries it has been even outlawed. Some parameters show that nuclear power, on the global scale and during this century at least, is absolutely essential and reasons for revival of nuclear energy are realistic. (author)

  17. Current status, challenges, and prospects of biopesticide utilization in Nigeria

    Directory of Open Access Journals (Sweden)

    Ivase Tertsegha John-Paul

    2017-12-01

    Full Text Available The toxicity, persistence, and non-biodegradability of chemical pesticides have increased calls for the adoption of sustainable and cost-effective pest control measures. Biopesticides present a sustainable alternative to synthetic pesticides. However, the biopesticide utilization in agrarian countries like Nigeria remains low, resulting in increased chemical pesticide utilization. Therefore, this paper seeks to examine the current status, challenges, and prospects of biopesticides in Nigeria. The findings revealed that biopesticide utilization in Nigeria is low due to high costs, poor infrastructure, skilled manpower alongside inconsistent field performance and government policies. The solution to these challenges will significantly boost crop protection, food security, and sustainable agriculture in Nigeria.

  18. Community-based dental education: history, current status, and future.

    Science.gov (United States)

    Formicola, Allan J; Bailit, Howard L

    2012-01-01

    This article examines the history, current status, and future direction of community-based dental education (CBDE). The key issues addressed include the reasons that dentistry developed a different clinical education model than the other health professions; how government programs, private medical foundations, and early adopter schools influenced the development of CBDE; the societal and financial factors that are leading more schools to increase the time that senior dental students spend in community programs; the impact of CBDE on school finances and faculty and student perceptions; and the reasons that CBDE is likely to become a core part of the clinical education of all dental graduates.

  19. Dance Technology. Current Applications and Future Trends.

    Science.gov (United States)

    Gray, Judith A., Ed.

    Original research is reported on image digitizing, robot choreography, movement analysis, databases for dance, computerized dance notation, and computerized lightboards for dance performance. Articles in this publication are as follows: (1) "The Evolution of Dance Technology" (Judith A. Gray); (2) "Toward a Language for Human Movement" (Thomas W.…

  20. Current high-level waste solidification technology

    International Nuclear Information System (INIS)

    Bonner, W.F.; Ross, W.A.

    1976-01-01

    Technology has been developed in the U.S. and abroad for solidification of high-level waste from nuclear power production. Several processes have been demonstrated with actual radioactive waste and are now being prepared for use in the commercial nuclear industry. Conversion of the waste to a glass form is favored because of its high degree of nondispersibility and safety

  1. Current Educational Technology Research Trends in Japan

    Science.gov (United States)

    Nakayama, Minoru; Ueno, Maomi

    2009-01-01

    To examine trends in educational practice research, this article conducted a survey and analysis of factors affecting the review of research papers in the field of the educational technology in Japan. Two factors, namely, practical orientation and theoretical orientation, were extracted from 63 survey responses, and scores from members of a…

  2. Gasification - Status and Technology; Foergasning - Status och teknik

    Energy Technology Data Exchange (ETDEWEB)

    Held, Joergen

    2011-07-15

    In this report gasification and gas cleaning techniques for biomass are treated. The main reason for gasifying biomass is to refine the fuel to make it suitable for efficient CHP production, as vehicle fuel or in industrial processes. The focus is on production of synthesis gas that can be used for production of vehicle fuel and for CHP production. Depending on application different types of gasifiers, gasification techniques and process parameters are of interest. Two gasification techniques have been identified as suitable for syngas generation, mainly due to the fact that they allow the production of a nitrogen free gas out of the gasifier; Indirect atmospheric gasification and Pressurized oxygen blown gasification For CHP production there are no restrictions on the gas composition in terms of nitrogen and here air-blown gasification is of interest as well. The main challenge when it comes to gas cleaning is related to sulphur and tars. There are different concepts and alternatives to handle sulphur and tars. Some of them is based on conventional techniques with well-proven components that are commercially available while others more advantageous solutions, still need further development. The report deals to a minor extent with the conversion of syngas to synthetic fuels. The ongoing research and development of gasification techniques is extensive, both on national and international level. Although many process concepts and components have been demonstrated, there is still no full-scale plant for the production of synthetic fuels based on biomass. Factors affecting the choice of technology are plant size, operating conditions, the possibility for process integration, access to feedstock, market aspects, incentives and economic instruments et cetera. Increased competition for biofuels will inevitably lead to higher raw material costs. This in turn means that the fuel chains with high efficiency, such as biomethane through gasification and methanation, are favored

  3. CURRENT STATUS AND TRENDS INVESTMENT IN AGRICULTURE UKRAINE

    OpenAIRE

    Sokolova, A. N.; Yurko, Т. S.; Klimenko, I. V.

    2018-01-01

    Globalization processes accelerate the pace of scientific and technological progress and innovation and require investment in innovation to enhance the efficiency of the national economy of our state and some of its branches, inter–industry complexes and sub–complexes at the level of developed countries.The article examines the current state of investment in agriculture of Ukraine. The main criteria to encourage capital investment taking into account regional peculiarities capital investment ...

  4. Methodology and technology for peripheral and central blood pressure and blood pressure variability measurement: current status and future directions - Position statement of the European Society of Hypertension Working Group on blood pressure monitoring and cardiovascular variability.

    Science.gov (United States)

    Stergiou, George S; Parati, Gianfranco; Vlachopoulos, Charalambos; Achimastos, Apostolos; Andreadis, Emanouel; Asmar, Roland; Avolio, Alberto; Benetos, Athanase; Bilo, Grzegorz; Boubouchairopoulou, Nadia; Boutouyrie, Pierre; Castiglioni, Paolo; de la Sierra, Alejandro; Dolan, Eamon; Head, Geoffrey; Imai, Yutaka; Kario, Kazuomi; Kollias, Anastasios; Kotsis, Vasilis; Manios, Efstathios; McManus, Richard; Mengden, Thomas; Mihailidou, Anastasia; Myers, Martin; Niiranen, Teemu; Ochoa, Juan Eugenio; Ohkubo, Takayoshi; Omboni, Stefano; Padfield, Paul; Palatini, Paolo; Papaioannou, Theodore; Protogerou, Athanasios; Redon, Josep; Verdecchia, Paolo; Wang, Jiguang; Zanchetti, Alberto; Mancia, Giuseppe; O'Brien, Eoin

    2016-09-01

    Office blood pressure measurement has been the basis for hypertension evaluation for almost a century. However, the evaluation of blood pressure out of the office using ambulatory or self-home monitoring is now strongly recommended for the accurate diagnosis in many, if not all, cases with suspected hypertension. Moreover, there is evidence that the variability of blood pressure might offer prognostic information that is independent of the average blood pressure level. Recently, advancement in technology has provided noninvasive evaluation of central (aortic) blood pressure, which might have attributes that are additive to the conventional brachial blood pressure measurement. This position statement, developed by international experts, deals with key research and practical issues in regard to peripheral blood pressure measurement (office, home, and ambulatory), blood pressure variability, and central blood pressure measurement. The objective is to present current achievements, identify gaps in knowledge and issues concerning clinical application, and present relevant research questions and directions to investigators and manufacturers for future research and development (primary goal).

  5. Current status of curriculum mapping in Canada and the UK.

    Science.gov (United States)

    Willett, Timothy G

    2008-08-01

    As part of curriculum evaluation, management and quality assurance strategies, many undergraduate medical schools are in the process of constructing computer-based curriculum maps. A survey was distributed to Canadian and UK medical schools to determine the current status, characteristics, and challenging and successful aspects of their efforts in curriculum mapping. Quantitative and qualitative analyses were performed. The majority of schools are in the process of building maps and about 20% of schools have completed maps but continue to upgrade them. The software used to construct the maps and the educational elements included in them vary among schools. A variety of educational outcome frameworks are employed for curriculum evaluation. Current major challenges include human resource demands, the use of medical ontologies, faculty development and interface design. Given that these problems are common and their solutions are resource-intensive, there is a place for collaboration and a need for further research.

  6. Review of the current status of linear hybrid reactor concepts

    International Nuclear Information System (INIS)

    Schultz, K.R.

    1977-07-01

    A review was made of the current status of linear fusion-fission hybrid reactor design studies in the USA. The linear hybrid reactor concepts reviewed include the linear theta-pinch hybrid reactor being studied at Los Alamos Scientific Laboratory, the electron beam-heated solenoid hybrid reactor under development at Physics International Co., the laser-heated solenoid hybrid reactor being investigated at Mathematical Sciences Northwest, Inc., and the linear fusion waste burning reactor being studied at General Atomic Company. The discussion addresses confinement and heating mechanisms for each concept, as well as the hybrid blanket designs. The current state of the four reactor designs is summarized and the performance of the various concepts compared

  7. Polycystic ovary syndrome: current status and future perspective

    Science.gov (United States)

    Barthelmess, Erin K.; Naz, Rajesh K.

    2015-01-01

    Polycystic ovary syndrome (PCOS) is a widespread reproductive disorder that encompasses many associated health conditions and has an impact on various metabolic processes. PCOS is depicted by hyperandrogenism, polycystic ovaries, and anovulation. It increases the risk of insulin resistance (IR), type 2 diabetes, obesity, and cardiovascular disease. The etiology of the disease remains unclear, and the subjective phenotype makes a united diagnosis difficult among physicians. It seems to be a familial genetic syndrome caused by a combination of environmental and genetic factors. It can be linked with metabolic disorders in first-degree family members. PCOS is the cause of up to 30% of infertility in couples seeking treatment. Currently, there is no cure for PCOS. Despite the growing incidence of this syndrome, limited research has been done that encompasses the entirety of PCOS spectrum. In this review, the current status and possible future perspective will be discussed. PMID:24389146

  8. Fission Surface Power Technology Development Status

    Science.gov (United States)

    Palac, Donald T.; Mason, Lee S.; Houts, Michael G.; Harlow, Scott

    2010-01-01

    Power is a critical consideration in planning exploration of the surfaces of the Moon, Mars, and beyond. Nuclear power is an important option, especially for locations in the solar system where sunlight is limited in availability or intensity. NASA is maintaining the option for fission surface power for the Moon and Mars by developing and demonstrating technology for an affordable fission surface power system. Because affordability drove the determination of the system concept that this technology will make possible, low development and recurring costs result, while required safety standards are maintained. However, an affordable approach to fission surface power also provides the benefits of simplicity, robustness, and conservatism in design. This paper will illuminate the multiplicity of benefits to an affordable approach to fission surface power, and will describe how the foundation for these benefits is being developed and demonstrated in the Exploration Technology Development Program s Fission Surface Power Project.

  9. Marine Current Energy Devices: Current Status and Possible Future Applications in Ireland

    OpenAIRE

    O'Rourke, Fergal; Boyle, Fergal; Reynolds, Anthony

    2010-01-01

    There is a growing demand for the use of renewable energy technologies to generate electricity due to concerns over climate change. The oceans provide a huge potential resource of energy. Energy extraction using marine current energy devices (MCEDs) offers a sustainable alternative to conventional sources and a predictable alternative to other renewable energy technologies. A MCED utilises the kinetic energy of the tides as opposed to the potential energy which is utilised by a tidal barrage....

  10. The status of basic technology in Cross River State Junior ...

    African Journals Online (AJOL)

    The purpose of the study was to ascertain the status of basic technology in Cross River State junior secondary schools. Descriptive survey design was adopted for the study. The study was guided by three (3) research questions. The population for the study comprised of one hundred and twelve (112) basic technology ...

  11. Generic Medicine Pricing Policies in Europe: Current Status and Impact

    Directory of Open Access Journals (Sweden)

    Pieter Dylst

    2010-03-01

    Full Text Available Generic medicine pricing is an area of national responsibility of European Union countries. This article aims to present the current status and impact of generic medicine pricing policies in ambulatory care in Europe. The study conducts a literature review of policies relating to free-pricing systems, price-regulated systems, price differentiation, price competition and discounts, and tendering procedures; and a survey of European generic medicine pricing policies. Competition from Indian generic medicine manufacturers, European variation in generic medicine prices and competition between generic medicine manufacturers by discount suggest that the potential savings to health care payers and patients from generic medicines are not fully realized in Europe. One way of attaining these savings may be to move away from competition by discount to competition by price. Free-pricing systems may drive medicine prices downwards under specific conditions. In price-regulated systems, regulation may lower prices of originator and generic medicines, but may also remove incentives for additional price reductions beyond those imposed by regulation. To date, little is known about the current status and impact of tendering procedures for medicines in ambulatory care. In conclusion, the European experience suggests that there is not a single approach towards developing generic medicine pricing policies in Europe.

  12. Current status of Paragonimus and paragonimiasis in Ecuador

    Directory of Open Access Journals (Sweden)

    Manuel Calvopiña

    2014-11-01

    Full Text Available A review of national and international publications on paragonimiasis in Ecuador, epidemiological records from the Ministry of Public Health and unpublished research data was conducted to summarise the current status of the parasite/disease. The purpose of the review is to educate physicians, policy-makers and health providers on the status of the disease and to stimulate scientific investigators to conduct further research. Paragonimiasis was first diagnosed in Ecuador 94 years ago and it is endemic to both tropical and subtropical regions in 19 of 24 provinces in the Pacific Coast and Amazon regions. Paragonimus mexicanus is the only known species in the country, with the mollusc Aroapyrgus colombiensis and the crabs Moreirocarcinus emarginatus, Hypolobocera chilensis and Hypolobocera aequatorialis being the primary and secondary intermediate hosts, respectively. Recent studies found P. mexicanus metacercariae in Trichodactylus faxoni crabs of the northern Amazon. Chronic pulmonary paragonimiasis is commonly misdiagnosed and treated as tuberculosis and although studies have demonstrated the efficacy of praziquantel and triclabendazole for the treatment of human infections, neither drug is available in Ecuador. Official data recorded from 1978-2007 indicate an annual incidence of 85.5 cases throughout the 19 provinces, with an estimated 17.2% of the population at risk of infection. There are no current data on the incidence/prevalence of infection, nor is there a national control programme.

  13. Current status of Paragonimus and paragonimiasis in Ecuador.

    Science.gov (United States)

    Calvopiña, Manuel; Romero, Daniel; Castañeda, Byron; Hashiguchi, Yoshihisa; Sugiyama, Hiromu

    2014-11-01

    A review of national and international publications on paragonimiasis in Ecuador, epidemiological records from the Ministry of Public Health and unpublished research data was conducted to summarise the current status of the parasite/disease. The purpose of the review is to educate physicians, policy-makers and health providers on the status of the disease and to stimulate scientific investigators to conduct further research. Paragonimiasis was first diagnosed in Ecuador 94 years ago and it is endemic to both tropical and subtropical regions in 19 of 24 provinces in the Pacific Coast and Amazon regions. Paragonimus mexicanus is the only known species in the country, with the mollusc Aroapyrgus colombiensis and the crabs Moreirocarcinus emarginatus, Hypolobocera chilensis and Hypolobocera aequatorialis being the primary and secondary intermediate hosts, respectively. Recent studies found P. mexicanus metacercariae in Trichodactylus faxoni crabs of the northern Amazon. Chronic pulmonary paragonimiasis is commonly misdiagnosed and treated as tuberculosis and although studies have demonstrated the efficacy of praziquantel and triclabendazole for the treatment of human infections, neither drug is available in Ecuador. Official data recorded from 1978-2007 indicate an annual incidence of 85.5 cases throughout the 19 provinces, with an estimated 17.2% of the population at risk of infection. There are no current data on the incidence/prevalence of infection, nor is there a national control programme.

  14. Parametric overdispersed frailty models for current status data.

    Science.gov (United States)

    Abrams, Steven; Aerts, Marc; Molenberghs, Geert; Hens, Niel

    2017-12-01

    Frailty models have a prominent place in survival analysis to model univariate and multivariate time-to-event data, often complicated by the presence of different types of censoring. In recent years, frailty modeling gained popularity in infectious disease epidemiology to quantify unobserved heterogeneity using Type I interval-censored serological data or current status data. In a multivariate setting, frailty models prove useful to assess the association between infection times related to multiple distinct infections acquired by the same individual. In addition to dependence among individual infection times, overdispersion can arise when the observed variability in the data exceeds the one implied by the model. In this article, we discuss parametric overdispersed frailty models for time-to-event data under Type I interval-censoring, building upon the work by Molenberghs et al. (2010) and Hens et al. (2009). The proposed methodology is illustrated using bivariate serological data on hepatitis A and B from Flanders, Belgium anno 1993-1994. Furthermore, the relationship between individual heterogeneity and overdispersion at a stratum-specific level is studied through simulations. Although it is important to account for overdispersion, one should be cautious when modeling both individual heterogeneity and overdispersion based on current status data as model selection is hampered by the loss of information due to censoring. © 2017, The International Biometric Society.

  15. Research Experience in Psychiatry Residency Programs Across Canada: Current Status

    Science.gov (United States)

    Shanmugalingam, Arany; Ferreria, Sharon G; Norman, Ross M G; Vasudev, Kamini

    2014-01-01

    Objective: To determine the current status of research experience in psychiatry residency programs across Canada. Method: Coordinators of Psychiatric Education (COPE) resident representatives from all 17 psychiatry residency programs in Canada were asked to complete a survey regarding research training requirements in their programs. Results: Among the 17 COPE representatives, 15 completed the survey, representing 88% of the Canadian medical schools that have a psychiatry residency program. Among the 15 programs, 11 (73%) require residents to conduct a scholarly activity to complete residency. Some of these programs incorporated such a requirement in the past 5 years. Ten respondents (67%) reported availability of official policy and (or) guidelines on resident research requirements. Among the 11 programs that have a research requirement, 10 (91%) require residents to complete 1 scholarly activity; 1 requires completion of 2 scholarly activities. Eight (53%) residency programs reported having a separate research track. All of the programs have a research coordinator and 14 (93%) programs provide protected time to residents for conducting research. The 3 most common types of scholarly activities that qualify for the mandatory research requirement are a full independent project (10 programs), a quality improvement project (8 programs), and assisting in a faculty project (8 programs). Six programs expect their residents to present their final work in a departmental forum. None of the residency programs require publication of residents’ final work. Conclusions: The current status of the research experience during psychiatry residency in Canada is encouraging but there is heterogeneity across the programs. PMID:25565474

  16. Status of nickel-hydrogen cell technology

    Science.gov (United States)

    Warnock, D. R.

    1980-01-01

    Nickel hydrogen cell technology has been developed which solves the problems of thermal management, oxygen management, electrolyte management, and electrical and mechanical design peculiar to this new type of battery. This technology was weight optimized for low orbit operation using computer modeling programs but is near optimum for other orbits. Cells ranging in capacity up to about 70 ampere-hours can be made from components of a single standard size and are available from two manufacturers. The knowledge gained is now being applied to the development of two extensions to the basic design: a second set of larger standard components that will cover the capacity range up to 150 ampere-hours; and the development of multicell common pressure vessel modules to reduce volume, cost and weight. A manufacturing technology program is planned to optimize the producibility of the cell design and reduce cost. The most important areas for further improvement are life and reliability which are governed by electrode and separator technology.

  17. Oxygen/hydrogen component technology status.

    Science.gov (United States)

    Fulton, D. L.; Lauffer, J. R.; Smith, G. R.; Zachary, A. T.

    1972-01-01

    The advanced technology applicable to oxygen/hydrogen systems for auxiliary propulsion systems and other high energy upper stage applications is being developed. Turbopump, propellant conditioner (gas generator and heat exchanger), thruster, igniter, valve, and flow controller components are being evaluated. A brief description of turbopump, conditioner, valve, and thruster experimental programs is presented. Design and hot-firing test data are discussed.

  18. Fiber Optic Communications Technology. A Status Report.

    Science.gov (United States)

    Hull, Joseph A.

    Fiber optic communications (communications over very pure glass transmission channels of diameter comparable to a human hair) is an emerging technology which promises most improvements in communications capacity at reasonable cost. The fiber transmission system offers many desirable characteristics representing improvements over conventional…

  19. Oral transmucosal drug delivery--current status and future prospects.

    Science.gov (United States)

    Sattar, Mohammed; Sayed, Ossama M; Lane, Majella E

    2014-08-25

    Oral transmucosal drug delivery (OTDD) dosage forms have been available since the 1980s. In contrast to the number of actives currently delivered locally to the oral cavity, the number delivered as buccal or sublingual formulations remains relatively low. This is surprising in view of the advantages associated with OTDD, compared with conventional oral drug delivery. This review examines a number of aspects related to OTDD including the anatomy of the oral cavity, models currently used to study OTDD, as well as commercially available formulations and emerging technologies. The limitations of current methodologies to study OTDD are considered as well as recent publications and new approaches which have advanced our understanding of this route of drug delivery. Copyright © 2014 Elsevier B.V. All rights reserved.

  20. Small modular reactors: current status, economic aspects and licensing

    Energy Technology Data Exchange (ETDEWEB)

    Zimbron E, E. [Instituto Tecnologico de Estudios Superiores de Monterrey, Campus Santa Fe, Av. Carlos Lazo No. 100, Santa Fe, 01389 Mexico D. F. (Mexico); Puente E, F., E-mail: erick.zimbron@gmail.com [ININ, Direccion de Investigacion Cientifica, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2014-10-15

    Interest for nuclear energy had resurgence since the beginning of the new century. This was a consequence of the new world conditions and needs: increasing energy demands (mainly from developing countries), awareness of the importance of energetic security and the necessity of limiting carbon emissions. In this nuclear boom, Small Modular Reactors (SMRs) develop and start to consolidate as a viable option for the present energy market. Their modular characteristics, lower initial capital cost, passive safety features and their niche applications, situate them as a technology with various advantages. The following study will present and analysis that will help to comprehend the SMRs present status. Information will show planned reactors, reactors in construction and in operation, advantages and challenges of their implementation, relevant economic aspects and important licensing factors that need to be highlighted. The analysis showed that the SMR technology is still in an initial stage that could reach and important development point in the next ten years. In this period, many of the reactors that are in design stage or that are through their licensing process might be constructed and could be getting ready for a commercial status. On the other hand, it has been observed that there are two main economic factors that need to be considered for any SMRs implementation project. First, the costs (initial, operation, maintenance, fuel and decommissioning) and second their possible niche market applications. Additionally, it has been noted that the licensing process is one of the greatest challenges for SMR general development. Licensing is mainly related to topic such as Emergency Planning Zone, first-of-a-kind engineering, passive safety features, proliferation resistance, multiple module designs and staffing. Previous information will serve as a base for carrying out a feasibility assessment analysis for SMR in Mexico. This part will be the last section of the project

  1. Small modular reactors: current status, economic aspects and licensing

    International Nuclear Information System (INIS)

    Zimbron E, E.; Puente E, F.

    2014-10-01

    Interest for nuclear energy had resurgence since the beginning of the new century. This was a consequence of the new world conditions and needs: increasing energy demands (mainly from developing countries), awareness of the importance of energetic security and the necessity of limiting carbon emissions. In this nuclear boom, Small Modular Reactors (SMRs) develop and start to consolidate as a viable option for the present energy market. Their modular characteristics, lower initial capital cost, passive safety features and their niche applications, situate them as a technology with various advantages. The following study will present and analysis that will help to comprehend the SMRs present status. Information will show planned reactors, reactors in construction and in operation, advantages and challenges of their implementation, relevant economic aspects and important licensing factors that need to be highlighted. The analysis showed that the SMR technology is still in an initial stage that could reach and important development point in the next ten years. In this period, many of the reactors that are in design stage or that are through their licensing process might be constructed and could be getting ready for a commercial status. On the other hand, it has been observed that there are two main economic factors that need to be considered for any SMRs implementation project. First, the costs (initial, operation, maintenance, fuel and decommissioning) and second their possible niche market applications. Additionally, it has been noted that the licensing process is one of the greatest challenges for SMR general development. Licensing is mainly related to topic such as Emergency Planning Zone, first-of-a-kind engineering, passive safety features, proliferation resistance, multiple module designs and staffing. Previous information will serve as a base for carrying out a feasibility assessment analysis for SMR in Mexico. This part will be the last section of the project

  2. Status of nuclear technology education in Mongolia

    International Nuclear Information System (INIS)

    Davaa, S.; Khuukhenkhuu, G.

    2007-01-01

    The National University of Mongolia (NUM) is the country's oldest, the only comprehensive university, and a leading center of science, education and culture. The NUM has twelve schools and faculties in the capital city Ulaanbaatar and three branches in provinces. The University offers the widest range of undergraduate and graduate programs in natural and social sciences and humanities. After sixty years of dynamic growth, the University has become a place of sustained innovation, a blend of scholarship and practical realism. The last ten years have been a period of reforms in the structure, financing and governance of Mongolian educational institutions. The NUM has been continuously adjusting its operations and curriculum to deal with new economic conditions, changing labour market demands and altered social aspirations. Committed to human peace, development and welfare in the increasingly globalized world, the NUM promotes equal and mutually beneficial international cooperation. It is a member of the International Association of Universities (IAU), University Mobility in Asia and the Pacific (UMAP), and Euro-Asian University Network (EAUN) and has direct co-operation agreements with more than sixty international academic and research centers in Europe, the USA and the Asia-Pacific Rim. On the threshold of the 21st century, the NUM remains a major center for fundamental and applied research as well as a university that is distinguished by the quality of its teaching. Following its values and traditions, the University strives to be an innovative and dynamic learning community. Requirements for Program Majored in Nuclear Technology: Profession major purpose: The objective is to provide knowledge and skills to use nuclear physics' methodology and nuclear radiation for education, science, health protection, agriculture, geology, mining, nature protection, energy and etc industries. The graduates of this major will become engineer technology staff and researchers in

  3. Australian shellfish ecosystems: Past distribution, current status and future direction.

    Directory of Open Access Journals (Sweden)

    Chris L Gillies

    Full Text Available We review the status of marine shellfish ecosystems formed primarily by bivalves in Australia, including: identifying ecosystem-forming species, assessing their historical and current extent, causes for decline and past and present management. Fourteen species of bivalves were identified as developing complex, three-dimensional reef or bed ecosystems in intertidal and subtidal areas across tropical, subtropical and temperate Australia. A dramatic decline in the extent and condition of Australia's two most common shellfish ecosystems, developed by Saccostrea glomerata and Ostrea angasi oysters, occurred during the mid-1800s to early 1900s in concurrence with extensive harvesting for food and lime production, ecosystem modification, disease outbreaks and a decline in water quality. Out of 118 historical locations containing O. angasi-developed ecosystems, only one location still contains the ecosystem whilst only six locations are known to still contain S. glomerata-developed ecosystems out of 60 historical locations. Ecosystems developed by the introduced oyster Crasostrea gigas are likely to be increasing in extent, whilst data on the remaining 11 ecosystem-forming species are limited, preventing a detailed assessment of their current ecosystem-forming status. Our analysis identifies that current knowledge on extent, physical characteristics, biodiversity and ecosystem services of Australian shellfish ecosystems is extremely limited. Despite the limited information on shellfish ecosystems, a number of restoration projects have recently been initiated across Australia and we propose a number of existing government policies and conservation mechanisms, if enacted, would readily serve to support the future conservation and recovery of Australia's shellfish ecosystems.

  4. Australian shellfish ecosystems: Past distribution, current status and future direction

    Science.gov (United States)

    Gillies, Chris L.; McLeod, Ian M.; Alleway, Heidi K.; Cook, Peter; Crawford, Christine; Creighton, Colin; Diggles, Ben; Ford, John; Hamer, Paul; Heller-Wagner, Gideon; Lebrault, Emma; Le Port, Agnès; Russell, Kylie; Sheaves, Marcus; Warnock, Bryn

    2018-01-01

    We review the status of marine shellfish ecosystems formed primarily by bivalves in Australia, including: identifying ecosystem-forming species, assessing their historical and current extent, causes for decline and past and present management. Fourteen species of bivalves were identified as developing complex, three-dimensional reef or bed ecosystems in intertidal and subtidal areas across tropical, subtropical and temperate Australia. A dramatic decline in the extent and condition of Australia’s two most common shellfish ecosystems, developed by Saccostrea glomerata and Ostrea angasi oysters, occurred during the mid-1800s to early 1900s in concurrence with extensive harvesting for food and lime production, ecosystem modification, disease outbreaks and a decline in water quality. Out of 118 historical locations containing O. angasi-developed ecosystems, only one location still contains the ecosystem whilst only six locations are known to still contain S. glomerata-developed ecosystems out of 60 historical locations. Ecosystems developed by the introduced oyster Crasostrea gigas are likely to be increasing in extent, whilst data on the remaining 11 ecosystem-forming species are limited, preventing a detailed assessment of their current ecosystem-forming status. Our analysis identifies that current knowledge on extent, physical characteristics, biodiversity and ecosystem services of Australian shellfish ecosystems is extremely limited. Despite the limited information on shellfish ecosystems, a number of restoration projects have recently been initiated across Australia and we propose a number of existing government policies and conservation mechanisms, if enacted, would readily serve to support the future conservation and recovery of Australia’s shellfish ecosystems. PMID:29444143

  5. Status of Solar Sail Technology Within NASA

    Science.gov (United States)

    Johnson, Les; Young, Roy; Montgomery, Edward; Alhorn, Dean

    2010-01-01

    In the early 2000s, NASA made substantial progress in the development of solar sail propulsion systems for use in robotic science and exploration of the solar system. Two different 20-m solar sail systems were produced and they successfully completed functional vacuum testing in NASA Glenn Research Center's (GRC's) Space Power Facility at Plum Brook Station, Ohio. The sails were designed and developed by ATK Space Systems and L Garde, respectively. The sail systems consist of a central structure with four deployable booms that support the sails. These sail designs are robust enough for deployment in a one-atmosphere, one-gravity environment and were scalable to much larger solar sails perhaps as large as 150 m on a side. Computation modeling and analytical simulations were also performed to assess the scalability of the technology to the large sizes required to implement the first generation of missions using solar sails. Life and space environmental effects testing of sail and component materials were also conducted. NASA terminated funding for solar sails and other advanced space propulsion technologies shortly after these ground demonstrations were completed. In order to capitalize on the $30M investment made in solar sail technology to that point, NASA Marshall Space Flight Center (MSFC) funded the NanoSail-D, a subscale solar sail system designed for possible small spacecraft applications. The NanoSail-D mission flew on board the ill-fated Falcon-1 Rocket launched August 2, 2008, and due to the failure of that rocket, never achieved orbit. The NanoSail-D flight spare will be flown in the Fall of 2010. This paper will summarize NASA's investment in solar sail technology to-date and discuss future opportunities

  6. The status of nuclear power technology

    International Nuclear Information System (INIS)

    Calori, F.

    1976-01-01

    A survey is presented of the present state of development concerning nuclear power technology, and the prospects of a modified future development of nuclear energy in the world are dealt with, modification being necessary on account of altered conditions in the development of the energy economy. Projections are made for the development of the fuel market taking into account the quantities and costs for the various steps of the fuel cycle. (UA) [de

  7. Feed enzyme technology: present status and future developments.

    Science.gov (United States)

    Ravindran, Velmurugu; Son, Jang-Ho

    2011-05-01

    Exogenous enzymes are now well accepted as a class of feed additives in diet formulations for poultry and pigs to overcome the negative effects of anti-nutritional factors, and to improve digestion of dietary components and animal performance. An overview of the current status of feed enzyme technology, including the different type of enzymes and modes of action, is provided. Variable response to enzyme supplementation is an important reason limiting the widespread acceptance of feed enzymes. The major reasons contributing to these variable responses are discussed. Main features of the next generation of feed enzymes and the various trends that will drive the future use of enzymes are highlighted. The use of feed enzymes in poultry and pig feed formulations is expected to increase in the future and this will be driven by on-going changes in the world animal production. Aquaculture and ruminant industries are emerging markets for exogenous feed enzymes. The article presents some promising patents on feed enzyme technology.

  8. Diamond detector technology: status and perspectives

    CERN Document Server

    Kagan, Harris; Artuso, M; Bachmair, F; Bäni, L; Bartosik, M; Beacham, J; Beck, H P; Bellini,, V; Belyaev, V; Bentele, B; Berdermann, E; Bergonzo, P; Bes, A; Brom, J-M; Bruzzi, M; Cerv, M; Chiodini, G; Chren, D; Cindro, V; Claus, G; Collot, J; Cumalat, J; Dabrowski, A; D'Alessandro, R; De Boer, W; Dehning, B; Dorfer, C; Dunser, M; Eremin, V; Eusebi, R; Forcolin, G; Forneris, J; Frais-Kölbl, H; Gan, K K; Gastal, M; Giroletti, C; Goffe, M; Goldstein, J; Golubev, A; Gorišek, A; Grigoriev, E; Grosse-Knetter, J; Grummer, A; Gui, B; Guthoff, M; Haughton, I; Hiti, B; Hits, D; Hoeferkamp, M; Hofmann, T; Hosslet, J; Hostachy, J-Y; Hügging, F; Hutton, C; Jansen, H; Janssen, J; Kanxheri, K; Kasieczka, G; Kass, R; Kassel, F; Kis, M; Kramberger, G; Kuleshov, S; Lacoste, A; Lagomarsino, S; Lo Giudice, A; Lukosi, E; Maazouzi, C; Mandic, I; Mathieu, C; Mcfadden, N; Menichelli, M; Mikuž, M; Morozzi, A; Moss, J; Mountain, R; Murphy, S; Muškinja, M; Oh, A; Oliviero, P; Passeri, D; Pernegger, H; Perrino, R; Picollo, F; Pomorski, M; Potenza, R; Quadt, A; Re, A; Reichmann, M; Riley, G; Roe, S; Sanz, D; Scaringella, M; Schaefer, D; Schmidt, C J; Schnetzer, S; Schreiner, T; Sciortino, S; Scorzoni, A; Seidel, S; Servoli, L; Sopko, B; Sopko, V; Spagnolo, S; Spanier, S; Stenson, K; Stone, R; Sutera, C; Taylor, Aaron; Traeger, M; Tromson, D; Trischuk, W; Tuve, C; Uplegger, L; Velthuis, J; Venturi, N; Vittone, E; Wagner, Stephen; Wallny, R; Wang, J C; Weingarten, J; Weiss, C; Wengler, T; Wermes, N; Yamouni, M; Zavrtanik, M

    2017-01-01

    The status of material development of poly-crystalline chemical vapor deposition (CVD) diamond is presented. We also present beam test results on the independence of signal size on incident par-ticle rate in charged particle detectors based on un-irradiated and irradiated poly-crystalline CVD diamond over a range of particle fluxes from 2 kHz/cm2 to 10 MHz/cm2. The pulse height of the sensors was measured with readout electronics with a peaking time of 6 ns. In addition the first beam test results from 3D detectors made with poly-crystalline CVD diamond are presented. Finally the first analysis of LHC data from the ATLAS Diamond Beam Monitor (DBM) which is based on pixelated poly-crystalline CVD diamond sensors bump-bonded to pixel readout elec-tronics is shown.

  9. USDOE radioactive waste incineration technology: status review

    International Nuclear Information System (INIS)

    Borduin, L.C.; Taboas, A.L.

    1980-01-01

    Early attempts were made to incinerate radioactive wastes met with operation and equipment problems such as feed preparation, corrosion, inadequate off-gas cleanup, incomplete combustion, and isotope containment. The US Department of Energy (DOE) continues to sponsor research, development, and the eventual demonstration of radioactive waste incineration. In addition, several industries are developing proprietary incineration system designs to meet other specific radwaste processing requirements. Although development efforts continue, significant results are available for the nuclear community and the general public to draw on in planning. This paper presents an introduction to incineration concerns, and an overview of the prominent radwaste incineration processes being developed within DOE. Brief process descriptions, status and goals of individual incineration systems, and planned or potential applications are also included

  10. Current developments in TREAT hodoscope technology

    International Nuclear Information System (INIS)

    De Volpi, A.

    1975-01-01

    The development of fuel motion monitoring is traced from its inception through present operation and into future programs. After noting the role of fuel motion studies in terms of safety assurance for the LMFBR, the history of in-pile fuel monitoring is reviewed. The operational record of the present TREAT fast neutron hodoscope is summarized with attention to various performance features. Development plans for the TREAT hodoscope are described in some detail. Application of the hodoscope has been considered for eight safety facilities other than TREAT. In addition, there is a possible role for fuel monitoring techniques to be extended to real-time ex-vessel core surveillance in operating reactors. Certain intrinsic strengths of the hodoscope technique for material monitoring are identified. The pattern of development may be characterized as an adaptation of several technologies to fit available requirements and resources

  11. Tidal current energy resource assessment in Ireland: Current status and future update

    International Nuclear Information System (INIS)

    O'Rourke, Fergal; Boyle, Fergal; Reynolds, Anthony

    2010-01-01

    Interest in renewable energy in Ireland has increased continually over the past decade. This interest is due primarily to security of supply issues and the effects of climate change. Ireland imports over 90% of its primary energy consumption, mostly in the form of fossil fuels. The exploitation of Ireland's vast indigenous renewable energy resources is required in order to reduce this over-dependence on fossil fuel imports to meet energy demand. Various targets have been set by the Irish government to incorporate renewable energy technologies into Ireland's energy market. As a result of these targets, the development in wind energy has increased substantially over the past decade; however this method of energy extraction is intermittent and unpredictable. Ireland has an excellent tidal current energy resource and the use of this resource will assist in the development of a sustainable energy future. Energy extraction using tidal current energy technologies offers a vast and predictable energy resource. This paper reviews the currently accepted tidal current energy resource assessment for Ireland. This assessment was compiled by Sustainable Energy Ireland in a report in 2004. The assessment employed a 2-dimensional numerical model of the tidal current velocities around Ireland, and from this numerical model the theoretical tidal current energy resource was identified. With the introduction of constraints and limitations, the technical, practical, accessible and viable tidal current energy resources were obtained. The paper discusses why the assessment needs updating including the effect on the assessment of the current stage of development of tidal current turbines and their deployment technology. (author)

  12. Current status of research and related activities in NAA application

    International Nuclear Information System (INIS)

    Ab Khalik bin Haji Wood

    1999-01-01

    Current activities of Analytical Chemistry Group of MINT (Malaysia Institute for Nuclear Technology Research) laboratory for elemental analysis of trace amounts in environmental samples such as air particulate matter (on air filter), soils/sediments, water, flora/fauna, oil sludge/waste sludge, and tailing/blasting slag and others, utilizing particularly NAA (Neutron Activation Analysis) method are reviewed. The laboratory participates in the IAEA-organized Interlaboratory Comparison Studies to ensure the analytical system. Other activities include analytical chemistry services with ICP-mass spectrometry and GC/GCMS to compliment the NAA and, moreover, air and marine pollution studies with participation in the UNDP/RCA/IAEA project. (S. Ohno)

  13. Current status of cerebral glioma surgery in China.

    Science.gov (United States)

    Wu, Jin-song; Zhang, Jie; Zhuang, Dong-xiao; Yao, Cheng-jun; Qiu, Tian-ming; Lu, Jun-feng; Zhu, Feng-ping; Mao, Ying; Zhou, Liang-fu

    2011-09-01

    The treatment of gliomas is highly individualized. Surgery for gliomas is essentially for histological diagnosis, to alleviate mass effect, and most importantly, to favor longer survival expectancy. During the past two decades, many surgical techniques and adjuvants have been applied to glioma surgery in China, which lead to a rapid development in the field of cerebral glioma surgery. This article broadly and critically reviewed the existing studies on cerebral glioma surgery and to portrait the current status of glioma surgery in China. A literature search was conducted covering major innovative surgical techniques and adjuvants for glioma surgery in China. The following databases were searched: the Pubmed (January 1995 to date); China Knowledge Resource Integrated Database (January 1995 to date) and VIP Database for Chinese Technical Periodicals (January 1995 to date). A selection criterion was established to exclude duplicates and irrelevant studies. The outcome measures were extracted from included studies. A total of 3307 articles were initially searched. After excluded by abstracts and full texts, 69 studies conducted in the mainland of China were included and went through further analysis. The philosophy of surgical strategies for cerebral gliomas in China is undergoing tremendous change. Nowadays Chinese neurosurgeons pay more attention to the postoperative neurofunctional status of the patients. The aim of the glioma surgery is not only the more extensive tumor resection but also the maximal safety of intervention. The well balance of longer overall survival and higher quality of life should be judged with respect to each individual patient.

  14. HTA Implementation in Latin American Countries: Comparison of Current and Preferred Status.

    Science.gov (United States)

    Rosselli, Diego; Quirland-Lazo, Camila; Csanádi, Marcell; Ruiz de Castilla, Eva María; González, Nelly Cisneros; Valdés, Julio; Abicalaffe, Cesar; Garzón, William; Leon, Giovanny; Kaló, Zoltán

    2017-12-01

    To provide an overview about the current status of health technology assessment (HTA) implementation in Latin American countries and to identify long-term objectives considering regional commonalities. We conducted a survey among participants of the 5th Latin American Future Trends Conference in October 2015. Thirty-seven respondents from eight Latin American countries provided insights about the current and preferred future status of HTA implementation related to human capacity building, HTA financing, process and organizational structure for HTA, scope of mandatory HTA, decision criteria, standardization of HTA methodology, mandating the use of local data, and international collaboration in HTA. Survey respondents reported insufficient human resources and public investment for HTA implementation. Organizational structure and legislation framework of HTA differ considerably across countries. According to survey respondents, in the future policymakers should rely more on the assessment of therapeutic value, cost-effectiveness, and budget impact criteria by applying explicit thresholds, potentially in a multicriteria decision analysis framework. HTA should not be restricted to policy decisions of new technologies but it should also be used for the revision of previous decisions. In addition, the quality and transparency of HTA have to be strengthened. HTA plays an increasingly important role in Latin American countries. Each country needs to record its current implementation status and identify components for improvement. Duplication of efforts can be reduced if international collaboration is integrated into national HTA implementation. Copyright © 2017. Published by Elsevier Inc.

  15. The status of food irradiation technology

    International Nuclear Information System (INIS)

    Sivinski, J.S.

    1989-01-01

    Irradiation is a mature technology for many uses, such as medical product sterilization, crosslinking of plastics, application of coatings, stabilization of natural and synthetic rubbers prior to vulcanization, and in plant genetics. It also has many potential applications in the food and agriculture industries, especially in the postharvest activities associated with processing, storing, and distribution and in utilization and consumption. The safety of food irradiation has been thoroughly studied and established by distinguished scientists of international stature and unimpeachable credentials. Approximately 30 countries permit food irradiation and it is commercially used in 21. Parasites are of serious concern since their impact on human health and economic productivity is significant, especially in developing countries with sanitation and food control problems. Parasites in meat and fish can be rendered sterile or inactivated with irradiation, and the potential for improved human health is significant. The second area for immediate use of irradiation is in meeting plant quarantine requirements. The benefits described above and the approval of the scientific community are moving the technology toward greater utilization

  16. 1982 annual status report: thermonuclear fusion technology

    International Nuclear Information System (INIS)

    1982-01-01

    The objective of this programme is to study the technological problems related to ''Post Jet'' experimental machines and, in a longer range, to assess the engineering aspects of Fusion Power Reactor Plants. According to the decision taken by the Council of Ministers on the JRC multiannual programme (1980-1983), the work performed on 1982 concerns four projects, namely: The Project 1: ''Fusion Reactor Studies''concerns mainly the NET (Next European Torus) studies which have been continued in the framework of the European participation to INTOR (INternational TOkamak Reactor). This represents a collaborative effort to design a major fusion experiment beyond the-upcoming generation of large tokamaks. The Project 2: ''Blanket Technology'' has the aim to investigate the behaviour of blanket materials in fusion conditions. The Project 3: ''Materials Sorting and Development'' has the aim to assess the mechanical properties and radiation damage of standard and advanced materials suited for structures, in particular for application as first wall of the fusion reactors. The Project 4: ''Cyclotron Operation and Experiments''has the task to exploit a cyclotron to simulate radiation damages to materials in a fusion ambient

  17. Generation IV nuclear reactors: Current status and future prospects

    International Nuclear Information System (INIS)

    Locatelli, Giorgio; Mancini, Mauro; Todeschini, Nicola

    2013-01-01

    Generation IV nuclear power plants (GEN IV NPPs) are supposed to become, in many countries, an important source of base load power in the middle–long term (2030–2050). Nowadays there are many designs of these NPPs but for political, strategic and economic reasons only few of them will be deployed. International literature proposes many papers and reports dealing with GEN IV NPPs, but there is an evident difference in the types and structures of the information and a general unbiased overview is missing. This paper fills the gap, presenting the state-of-the-art for GEN IV NPPs technologies (VHTR, SFR, SCWR, GFR, LFR and MSR) providing a comprehensive literature review of the different designs, discussing the major R and D challenges and comparing them with other advanced technologies available for the middle- and long-term energy market. The result of this research shows that the possible applications for GEN IV technologies are wider than current NPPs. The economics of some GEN IV NPPs is similar to actual NPPs but the “carbon cost” for fossil-fired power plants would increase the relative valuation. However, GEN IV NPPs still require substantial R and D effort, preventing short-term commercial adoption. - Highlights: • Generation IV reactors are the middle–long term technology for nuclear energy. • This paper provides an overview and a taxonomy for the designs under consideration. • R and D efforts are in the material, heat exchangers, power conversion unit and fuel. • The life cycle costs are competitive with other innovative technologies. • The hydrogen economy will foster the development of Generation IV reactors

  18. Cobalt 60 gamma irradiation current status, trends and insights

    International Nuclear Information System (INIS)

    Corley, John T.

    1998-01-01

    This paper discusses the current status, trends and insights into the continued, safe use of cobalt 60 gamma irradiation. Also presented are some of the many initiatives undertaken at MDS Nordion. Topics covered include our investment for the future supply of raw materials and the latest news from source production. Briefly presented are the tasks associated with the safe transport of cobalt 60 around the world. Discussed is cobalt 60 usage at the customer site; more specifically maintaining source integrity, source utilization and irradiator design trends. Highlighted are industry trends for North America, Europe and the rest of the world. Finally presented are the challenges and opportunities for the industry. Stressed in the paper is the need to work together

  19. Current Status of QA For Nuclear Power Plants in Japan

    International Nuclear Information System (INIS)

    Nagoshi, Hitohiko

    1986-01-01

    It is the current status of QA and our QA experiences with nuclear power plants against the background of the Japanese social and business environment. Accordingly, in 1972, 'The Guidance for Quality Assurance in Construction of Nuclear Power Plants' based on U. S. 10CEF50 Appendix B, was published by the Japan Electric Association. 'Jug-4101 The Guide for Quality Assurance of Nuclear Power Plants' has been prepared by referring to the IAEA QA code. The Guide has been accepted by the Japanese nuclear industry and applied to the QA programs of every organization concerned therewith. The Japanese approach to higher quality will naturally be different from that of other countries because of Japan's cultural, social, and economic conditions. Even higher quality is being aimed at through the LWR Improvement and Standardization Program and coordinated quality assurance efforts

  20. Current status of the integrated safeguards for LEU fabrication plants

    International Nuclear Information System (INIS)

    Sawada, Hiroshi; Kawashima, Eiichi; Ishikawa, Tadatsugu; Suzuki, Katsuyuki; Kaminaga, Takeshi

    2008-01-01

    IAEA has aimed at the establishment of the Integrated Safeguards that integrates conventional safeguards agreement and additional protocol for effective use of the inspection resources. At the board meeting in June 2004, IAEA announced to apply the Integrated Safeguards approach for nuclear activities in Japan. Afterwards, the Integrated Safeguards was gradually introduced according to the type of facilities and about three years have passed since the Integrated Safeguards for LEU fabrication plant began in January 2005. Under the Integrated Safeguards, the efficiency improvement of the safeguards activity is attempted by PIV based on 50% random selection probability for each LEU fabrication plants and SNRI of eight times a year for all LEU fabrication plants on the average. Moreover, the reduction in PDIs (Person Day Inspection) is attempted resulting from decrease in these inspection frequencies. In this report, the current status and the problems of the Integrated Safeguards for LEU fabrication plant are described. (author)

  1. Current status of high energy nucleon-meson transport code

    Energy Technology Data Exchange (ETDEWEB)

    Takada, Hiroshi; Sasa, Toshinobu [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-03-01

    Current status of design code of accelerator (NMTC/JAERI code), outline of physical model and evaluation of accuracy of code were reported. To evaluate the nuclear performance of accelerator and strong spallation neutron origin, the nuclear reaction between high energy proton and target nuclide and behaviors of various produced particles are necessary. The nuclear design of spallation neutron system used a calculation code system connected the high energy nucleon{center_dot}meson transport code and the neutron{center_dot}photon transport code. NMTC/JAERI is described by the particle evaporation process under consideration of competition reaction of intranuclear cascade and fission process. Particle transport calculation was carried out for proton, neutron, {pi}- and {mu}-meson. To verify and improve accuracy of high energy nucleon-meson transport code, data of spallation and spallation neutron fragment by the integral experiment were collected. (S.Y.)

  2. Current Status of Lumbar Interbody Fusion for Degenerative Spondylolisthesis

    Science.gov (United States)

    TAKAHASHI, Toshiyuki; HANAKITA, Junya; OHTAKE, Yasufumi; FUNAKOSHI, Yusuke; OICHI, Yuki; KAWAOKA, Taigo; WATANABE, Mizuki

    2016-01-01

    Instrumented lumbar fusion can provide immediate stability and assist in satisfactory arthrodesis in patients who have pain or instability of the lumbar spine. Lumbar adjunctive fusion with decompression is often a good procedure for surgical management of degenerative spondylolisthesis (DS). Among various lumbar fusion techniques, lumbar interbody fusion (LIF) has an advantage in that it maintains favorable lumbar alignment and provides successful fusion with the added effect of indirect decompression. This technique has been widely used and represents an advancement in spinal instrumentation, although the rationale and optimal type of LIF for DS remains controversial. We evaluated the current status and role of LIF in DS treatment, mainly as a means to augment instrumentation. We addressed the basic concept of LIF, its indications, and various types including minimally invasive techniques. It also has acceptable biomechanical features, and offers reconstruction with ideal lumbar alignment. Postsurgical adverse events related to each LIF technique are also addressed. PMID:27169496

  3. Inhomogeneous cosmology and backreaction: Current status and future prospects

    Science.gov (United States)

    Bolejko, Krzysztof; Korzyński, Mikołaj

    Astronomical observations reveal hierarchical structures in the universe, from galaxies, groups of galaxies, clusters and superclusters, to filaments and voids. On the largest scales, it seems that some kind of statistical homogeneity can be observed. As a result, modern cosmological models are based on spatially homogeneous and isotropic solutions of the Einstein equations, and the evolution of the universe is approximated by the Friedmann equations. In parallel to standard homogeneous cosmology, the field of inhomogeneous cosmology and backreaction is being developed. This field investigates whether small scale inhomogeneities via nonlinear effects can backreact and alter the properties of the universe on its largest scales, leading to a non-Friedmannian evolution. This paper presents the current status of inhomogeneous cosmology and backreaction. It also discusses future prospects of the field of inhomogeneous cosmology, which is based on a survey of 50 academics working in the field of inhomogeneous cosmology.

  4. Current status of thermoluminescence studies on minerals and rocks

    International Nuclear Information System (INIS)

    Sankaran, A.V.; Nambi, K.S.V.; Sunta, C.M.

    1982-01-01

    The usefulness of thermoluminescence (TL) in geological studies is being increasingly recognized, as may be judged from the considerable volume of literature accumulated over the past couple of decades; besides, a number of seminars, conferences and specialists' meetings have also been held on the subject of applied TL. However, these publications lie scattered over several periodicals and conference proceedings and an interested worker finds it difficult to obtain the gist of the contributions in one place. The present authors felt a need for this and have, therefore, attempted to bring together in this Report the current status of TL research about different minerals; applications in the fields of geochronology, ore-prospecting, stratigraphic correlation, geothermometry and other useful areas are also included. (author)

  5. The current status of the Korean student health examination

    Directory of Open Access Journals (Sweden)

    Hye-Jung Shin

    2013-08-01

    Full Text Available Recent trends place an emphasis on school health care, the ultimate goal of which is to protect,maintain, and promote students’ health. School health care is a program that integrates health careservices, health education, health counseling, and local social health services. The student healthexamination (SHE system is a part of school health care and schools and communities must beavailable to provide professional health services. Pediatricians also have important roles as experts inboth school health care and the SHE system. In this article, the history of school health care, its legalbasis, and the current status of the SHE system in Korea are reviewed. Furthermore, sample surveysfrom the past few years are reviewed. Through this holistic approach, future directions are proposed forthe improvement of SHE and school health care.

  6. Robotic bariatric surgery: A general review of the current status.

    Science.gov (United States)

    Jung, Minoa K; Hagen, Monika E; Buchs, Nicolas C; Buehler, Leo H; Morel, Philippe

    2017-12-01

    While conventional laparoscopy is the gold standard for almost all bariatric procedures, robotic assistance holds promise for facilitating complex surgeries and improving clinical outcomes. Since the report of the first robotic-assisted bariatric procedure in 1999, numerous publications, including those reporting comparative trials and meta-analyses across bariatric procedures with a focus on robotic assistance, can be found. This article reviews the current literature and portrays the perspectives of robotic bariatric surgery. While there are substantial reports on robotic bariatric surgery currently in publication, most studies suffer from low levels of evidence. As such, although robotics technology is without a doubt superior to conventional laparoscopy, the precise role of robotics in bariatric surgery is not yet clear. Copyright © 2017 John Wiley & Sons, Ltd.

  7. Loco-regional treatment of HCC: current status.

    Science.gov (United States)

    Crocetti, L; Bargellini, I; Cioni, R

    2017-08-01

    Hepatocellular carcinoma (HCC) represents one of the few cancers for which locoregional treatments are recognised as being able to cure and/or prolong survival and are included in international guidelines. This is due to the unique nature of HCC, in most cases occurring in patients with underlying virus- or alcohol-related cirrhosis. The treatment choice in patients with HCC is therefore driven not only by tumour staging, as in the great majority of cancers, but also by careful evaluation of liver function and physical status. Another specific feature of HCC is that it is the only tumour that can be cured by organ transplantation, with the aim of treating both the cancer and underlying liver disease. These characteristics configure a complex scenario and prompt the need for close cooperation among interventional oncologists, surgeons, hepatologists, and anaesthesiologists. In patients with limited hepatic disease, preserved hepatic function and good performance status, categorised as very early and early-stage HCC according to the Barcelona Clinic Liver Cancer (BCLC) classification, image-guided tumour ablation is included among the curative treatments. More than half of patients with HCC are, however, diagnosed late, despite the widespread implementation of surveillance programmes, when curative treatments cannot be applied. For patients presenting with multinodular HCC and relatively preserved liver function, absence of cancer-related symptoms, and no evidence of vascular invasion or extrahepatic spread transcatheter arterial chemoembolisation (TACE) is the current standard of care. Although anti-tumour activity and promising survival results has been reported in cohorts of patients with advanced HCC treated with radio-embolisation, systemic treatment with the multi-kinase inhibitor, sorafenib, is still recommended for patients at this stage. In this article, current treatment strategies for HCC according to tumour stage are discussed, underlining the latest

  8. Eddy current technologies for thick metal structures

    International Nuclear Information System (INIS)

    Takagi, Toshiyuki; Endo, Hisashi

    2004-01-01

    One of approach of an eddy current testing (ECT) for thick metal structures is introduced. The detection limit of ECT is capable of enlarging thick more than 10 mm, which is ordinarily about 5 mm, by the design of probe. On the basis of results of numerical analysis, the defect detection in thick and shape is evaluated by the distribution of experimental ECT signals. The problems of ECT for thick metal structures and measures, approach to probe design, the specifications of probe, evaluation of experimental results and defect detection are described. By ECT fast simulator, good slit sharp is simulated in the case of 10 and 20 mm of EDM slit length and 5, 10 and 15 mm of slit height. (S.Y.)

  9. Status of SOFCo SOFC technology development

    Energy Technology Data Exchange (ETDEWEB)

    Privette, R.; Perna, M.A.; Kneidel, K. [SOFCo, Alliance, OH (United States)] [and others

    1996-12-31

    SOFCo, a Babcock & Wilcox/Ceramatec Research & Development Limited Partnership, is a collaborative research and development venture to develop technologies related to planar, solid-oxide fuel cells (SOFCs). SOFCo has successfully demonstrated a kW-class, solid-oxide fuel cell module operating on pipeline natural gas. The SOFC system design integrates the air preheater and the fuel processor with the fuel cell stacks into a compact test unit; this is the platform for multi-kW modules. The cells, made of tape-cast zirconia electrolyte and conventional electrode materials, exhibit excel lent stability in single-cell tests approaching 40,000 hours of operation. Stack tests using 10-cm and 15-cm cells with ceramic interconnects also show good performance and stability in tests for many thousands of hours.

  10. Status of Fast Reactor Research and Technology Development

    International Nuclear Information System (INIS)

    2012-01-01

    In 1985, the International Atomic Energy Agency (IAEA) published a report titled 'Status of Liquid Metal Cooled Fast Breeder Reactors' (Technical Reports Series No. 246). The report was a general review of the status of fast reactor development at that time, covering some aspects of design and operation and reviewing experience from the earliest days. It summarized the programmes and plans in all countries which were pursuing the development of fast reactors. In 1999, the IAEA published a follow-up report titled 'Status of Liquid Metal Cooled Fast Reactor Technology' (IAEA-TECDOC-1083), necessitated by the substantial advances in fast reactor technology development and changes in the economic and regulatory environment which took place during the period of 1985-1998. Chief among these were the demonstration of reliable operation by several prototypes and experimental reactors, the reliable operation of fuel at a high burnup and the launch of new fast reactor programmes by some additional Member States. In 2006, the Technical Working Group on Fast Reactors (TWG-FR) identified the need to update its past publications and recommended the preparation of a new status report on fast reactor technology. The present status report intends to provide comprehensive and detailed information on the technology of fast neutron reactors. The focus is on practical issues that are useful to engineers, scientists, managers, university students and professors, on the following topics: experience in construction, operation and decommissioning; various areas of research and development; engineering; safety; and national strategies and public acceptance of fast reactors.

  11. Status of Fast Reactor Research and Technology Development

    International Nuclear Information System (INIS)

    2013-01-01

    In 1985, the International Atomic Energy Agency (IAEA) published a report titled 'Status of Liquid Metal Cooled Fast Breeder Reactors' (Technical Reports Series No. 246). The report was a general review of the status of fast reactor development at that time, covering some aspects of design and operation and reviewing experience from the earliest days. It summarized the programmes and plans in all countries which were pursuing the development of fast reactors. In 1999, the IAEA published a follow-up report titled 'Status of Liquid Metal Cooled Fast Reactor Technology' (IAEA-TECDOC-1083), necessitated by the substantial advances in fast reactor technology development and changes in the economic and regulatory environment which took place during the period of 1985-1998. Chief among these were the demonstration of reliable operation by several prototypes and experimental reactors, the reliable operation of fuel at a high burnup and the launch of new fast reactor programmes by some additional Member States. In 2006, the Technical Working Group on Fast Reactors (TWG-FR) identified the need to update its past publications and recommended the preparation of a new status report on fast reactor technology. The present status report intends to provide comprehensive and detailed information on the technology of fast neutron reactors. The focus is on practical issues that are useful to engineers, scientists, managers, university students and professors, on the following topics: experience in construction, operation and decommissioning; various areas of research and development; engineering; safety; and national strategies and public acceptance of fast reactors.

  12. 1980 Annual status report: thermonuclear fusion technology

    International Nuclear Information System (INIS)

    1981-01-01

    According to the decisions taken by the Council of Ministers on the JRC multiannual programme (1980-83), the 1980 activity has been oriented toward four projects which cover a broad range of fields, namely: - the Project 1: 'Reactor Studies'. The main effort was oriented toward the NET/INTOR studies. JRC Ispra is acting as reference nucleus for NET preliminary design. For the moment being this work was made in support to the European participation to INTOR. In 1980 the conceptual design of a demonstration power reactor (FINTOR-D) was also achieved. - The Project 2: 'Blanket Technology' has the aim to investigate structural materials behaviour in fusion conditions. Items like tritium outgassing and permeation from structurals an materials compatibility were investigated. - The Projet 3: 'Material sorting and development'. Its aim is to assess mechanical properties and radiation damage of standard and advanced materials suited for reactor structures. - The Projet 4: 'Cyclotron construction and operation' has the task to install and exploit a cyclotron to simulate demages to materials in a fusion ambient

  13. Current Status of Postdoctoral and Graduate Programs in Dentistry.

    Science.gov (United States)

    Assael, Leon

    2017-08-01

    Advanced dental education has evolved in the context of societal needs and economic trends to its current status. Graduate programs have positioned their role in the context of health systems and health science education trends in hospitals, interprofessional clinical care teams, and dental schools and oral health care systems. Graduate dental education has been a critical factor in developing teams in trauma care, craniofacial disorders, pediatric and adult medicine, and oncology. The misalignment of the mission of graduate dental programs and the demands of private practice has posed a challenge in the evolution of programs as educational programs have been directed towards tertiary and indigent care while the practice community focuses on largely healthy affluent patients for complex clinical interventions. Those seeking graduate dental education today are smaller in number and include more international dental graduates than in the past. Graduate dental education in general dentistry and in the nine recognized dental specialties now includes Commission on Dental Accreditation (CODA) recognition of training standards as part of its accreditation process and a CODA accreditation process for areas of clinical education not recognized as specialties by the American Dental Association. Current types of programs include fellowship training for students in recognized specialties. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

  14. Current status of preimplantation genetic diagnosis in Japan.

    Science.gov (United States)

    Sato, Kenji; Sueoka, Kou; Iino, Kotaro; Senba, Hiroshi; Suzuki, Mariko; Mizuguchi, Yuki; Izumi, Yoko; Sato, Suguru; Nakabayashi, Akira; Tanaka, Mamoru

    2015-01-01

    This is a retrospective study aimingto clarify the current status of preimplantation genetic diagnosis (PGD) in Japan. Our data were collected from 12 facilities between September 2004 and September 2012, and entered into a database. A majority of PGD in Japan was performed for balanced structural chromosomal abnormalities in couples with recurrent miscarriage. PGD for monogenic diseases was performed only in two facilities. The average maternal age was 38 years for monogenic diseases and 40 years for chromosomal abnormalities. Overall there have been671 cycles to oocyte retrieval reported. Of these cycles, 85% (572 cycles)were for chromosomal abnormalities, and 15% (99 cycles) for monogenic diseases. Diagnosis rates in the current study were 70.8% for monogenic diseases and 94.0% for chromosomal abnormalities. Rates of embryo transfer of PGD were 62.7% for monogenic diseases and 25.5% for chromosomal abnormalities. Clinical pregnancy rates per embryo transfer were 12.0% for monogenic diseases and 35.6% for chromosomal abnormalities. Our study is the first PGD report from all facilities which had the approval of the ethics committee of the Japanese Society of Obstetrics and Gynecology. We have built a basis for gathering continuous PGD data in Japan.

  15. The Texas physician workforce: current status and future direction.

    Science.gov (United States)

    Shomaker, T Samuel

    2009-11-01

    The United States is facing serious physician workforce challenges. These include a shortage of physicians; declining interest in primary care; a maldistribution of doctors, particularly in inner-city and rural areas; the lack of a coherent workforce planning mechanism; and a workforce that does not reflect the diversity of the general population. Texas has many of the same issues, but problems are magnified by a historically low physician-to-population ratio; a rapidly growing and increasingly diverse population; and significant access-to-care issues, driven by a large uninsured population. This article reviews the current status of the US physician workforce and the challenges facing the nation over the next 20 years, and compares the national situation with prevailing and future conditions in Texas. Unless current trends are altered, Texas will face a growing shortage of physicians (particularly in primary care and certain specialty areas) that will be worse in rural and border areas. Although Texas medical schools are increasing enrollment, the growth in their graduate medical education slots is not keeping pace, creating a bottleneck that will constrain growth in the number of practicing physicians.

  16. Current status of RTO development and its implications for Canada

    International Nuclear Information System (INIS)

    MacDougall, M.

    2002-01-01

    This presentation includes a corporate review of Powerex, a review of Order 2000, and the current status of the Federal Energy Regulatory Commission's (FERC) efforts regarding Regional Transmission Operators (RTOs). Other topics of discussion include FERC's standard market design, an update of RTO West and implications for Canada. Powerex was incorporated in 1988 as a wholly-owned subsidiary of BC Hydro. British Columbia-based Powerex's heaviest trading is along the western-most states and Alberta, but it is slowly expanding into central and eastern markets. It evolved by selling and buying power at the United States Border. It received US FERC power marketing authorization in 1997 and has since seen sales jump from C$165 million to C$5.4 billion. Currently, the majority of power supply is from utilities other than BC Hydro. The presentation addresses issues such as the Federal Power Act, PUHCA and PURPA, and the 1992 Energy Policy Act which deals with expanded access to the power grid. Power Pool restructuring and FERC orders 888/889 are also discussed. 2 figs

  17. Plutonium metal exchange program : current status and statistical analysis

    Energy Technology Data Exchange (ETDEWEB)

    Tandon, L. (Lav); Eglin, J. L. (Judith Lynn); Michalak, S. E. (Sarah E.); Picard, R. R.; Temer, D. J. (Donald J.)

    2004-01-01

    The Rocky Flats Plutonium (Pu) Metal Sample Exchange program was conducted to insure the quality and intercomparability of measurements such as Pu assay, Pu isotopics, and impurity analyses. The Rocky Flats program was discontinued in 1989 after more than 30 years. In 2001, Los Alamos National Laboratory (LANL) reestablished the Pu Metal Exchange program. In addition to the Atomic Weapons Establishment (AWE) at Aldermaston, six Department of Energy (DOE) facilities Argonne East, Argonne West, Livermore, Los Alamos, New Brunswick Laboratory, and Savannah River are currently participating in the program. Plutonium metal samples are prepared and distributed to the sites for destructive measurements to determine elemental concentration, isotopic abundance, and both metallic and nonmetallic impurity levels. The program provides independent verification of analytical measurement capabilies for each participating facility and allows problems in analytical methods to be identified. The current status of the program will be discussed with emphasis on the unique statistical analysis and modeling of the data developed for the program. The discussion includes the definition of the consensus values for each analyte (in the presence and absence of anomalous values and/or censored values), and interesting features of the data and the results.

  18. Drugs in development for toxoplasmosis: advances, challenges, and current status

    Directory of Open Access Journals (Sweden)

    Alday PH

    2017-01-01

    Full Text Available P Holland Alday,1 Joseph Stone Doggett1,2 1Division of Infectious Diseases, Oregon Health & Science University, 2Portland Veterans Affairs Medical Center, Portland, OR, USA Abstract: Toxoplasma gondii causes fatal and debilitating brain and eye diseases. Medicines that are currently used to treat toxoplasmosis commonly have toxic side effects and require prolonged courses that range from weeks to more than a year. The need for long treatment durations and the risk of relapsing disease are in part due to the lack of efficacy against T. gondii tissue cysts. The challenges for developing a more effective treatment for toxoplasmosis include decreasing toxicity, achieving therapeutic concentrations in the brain and eye, shortening duration, eliminating tissue cysts from the host, safety in pregnancy, and creating a formulation that is inexpensive and practical for use in resource-poor areas of the world. Over the last decade, significant progress has been made in identifying and developing new compounds for the treatment of toxoplasmosis. Unlike clinically used medicines that were repurposed for toxoplasmosis, these compounds have been optimized for efficacy against toxoplasmosis during preclinical development. Medicines with enhanced efficacy as well as features that address the unique aspects of toxoplasmosis have the potential to greatly improve toxoplasmosis therapy. This review discusses the facets of toxoplasmosis that are pertinent to drug design and the advances, challenges, and current status of preclinical drug research for toxoplasmosis. Keywords: Toxoplasma gondii, therapeutics, preclinical medicine, experimental medicine, mechanism of action, Apicomplexa

  19. Current status and strategies for viral hepatitis control in Korea

    Directory of Open Access Journals (Sweden)

    Dong Hyun Sinn

    2017-09-01

    Full Text Available Viral hepatitis is one of major global health challenges with increasing disease burden worldwide. Hepatitis B virus and hepatitis C virus infections are major causes of chronic liver diseases. They can lead to cirrhosis, hepatocellular carcinoma, and death in significant portion of affected people. Transmission of hepatitis B virus can be blocked by vaccination. Progression of hepatitis B virus-related liver diseases can be prevented by long-term viral suppression with effective drugs. Although vaccine for hepatitis C virus is currently unavailable, hepatitis C virus infection can be eradicated by oral direct antiviral agents. To eliminate viral hepatitis, World Health Organization (WHO has urged countries to develop national goals and targets through reducing 90% of new infections and providing universal access to key treatment services up to 80%. This can lead to 65% reduction of viral hepatitis-related mortality. Here, we discuss some key features of viral hepatitis, strategies to control viral hepatitis suggested by WHO, and current status and strategies for viral hepatitis control in South Korea. To achieve the goal of viral hepatitis elimination by 2030 in South Korea, an independent 'viral hepatitis sector' in Centers for Disease Control & Prevention (CDC needs to be established to organize and execute comprehensive strategy for the management of viral hepatitis in South Korea.

  20. Drugs in development for toxoplasmosis: advances, challenges, and current status.

    Science.gov (United States)

    Alday, P Holland; Doggett, Joseph Stone

    2017-01-01

    Toxoplasma gondii causes fatal and debilitating brain and eye diseases. Medicines that are currently used to treat toxoplasmosis commonly have toxic side effects and require prolonged courses that range from weeks to more than a year. The need for long treatment durations and the risk of relapsing disease are in part due to the lack of efficacy against T. gondii tissue cysts. The challenges for developing a more effective treatment for toxoplasmosis include decreasing toxicity, achieving therapeutic concentrations in the brain and eye, shortening duration, eliminating tissue cysts from the host, safety in pregnancy, and creating a formulation that is inexpensive and practical for use in resource-poor areas of the world. Over the last decade, significant progress has been made in identifying and developing new compounds for the treatment of toxoplasmosis. Unlike clinically used medicines that were repurposed for toxoplasmosis, these compounds have been optimized for efficacy against toxoplasmosis during preclinical development. Medicines with enhanced efficacy as well as features that address the unique aspects of toxoplasmosis have the potential to greatly improve toxoplasmosis therapy. This review discusses the facets of toxoplasmosis that are pertinent to drug design and the advances, challenges, and current status of preclinical drug research for toxoplasmosis.

  1. Current status of robot-assisted gastric surgery

    Science.gov (United States)

    Baek, Se-Jin; Lee, Dong-Woo; Park, Sung-Soo; Kim, Seon-Hahn

    2011-01-01

    In an effort to minimize the limitations of laparoscopy, a robotic surgery system was introduced, but its role for gastric cancer is still unclear. The objective of this article is to assess the current status of robotic surgery for gastric cancer and to predict future prospects. Although the current study was limited by its small number of patients and retrospective nature, robot-assisted gastrectomy with lymphadenectomy for the treatment of gastric cancer is a feasible and safe procedure for experienced laparoscopic surgeons. Most studies have reported satisfactory results for postoperative short-term coutcomes, such as: postoperative oral feeding, gas out, hospital stay and complications, compared with laparoscopic surgery; the difference is a longer operation time. However, robotic surgery showed a shallow learning curve compared with the familarity of conventional open surgery; after the accumulation of several cases, robotic surgery could be expected to result in a similar operation time. Robotic-assisted gastrectomy can expand the indications of minimally invasive surgery to include advanced gastric cancer by improving the ability to perform lymphadenectomy. Moreover, ”total” robotic gastrectomy can be facilitated using a robot-sewing technique and gastric submucosal tumors near the gastroesophageal junction or pylorus can be resected safely by this novel technique. In conclusion, robot-assisted gastrectomy may offer a good alternative to conventional open or laparoscopic surgery for gastric cancer, provided that long-term oncologic outcomes can be confirmed. PMID:22046490

  2. Current Status of the Daejeon Ion Accelerator Complex at KAERI

    Energy Technology Data Exchange (ETDEWEB)

    Huh, Sung-Ryul; Chang, Dae-Sik; Hwang, Churl-Kew; Lee, Seok-Kwan; Jin, Jeong-Tae; Oh, Byung-Hoon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    The Daejeon ion accelerator complex (DIAC) is being constructed at Korea atomic energy research institute (KAERI) in order to fulfill an increasing demand for heavy ion beam facilities for various purposes including structural material study, biological research and nanomaterial treatment. The accelerators in the DIAC are designed to produce heavy ion beams with energies up to 1 MeV/u and beam currents up to 300 μA. [1–4] In this article, current status of the DIAC construction is presented and discussed. The DIAC facilities are designed to handle stable non-radioactive beams. According to user demand, the separated two ECR sources (i.e., an 18 GHz KEK – the high energy accelerator research organization ECR ion source with a metal oven and a 14.5 GHz KAERI ECR ion source) together with low energy beam transport line (LEBT) can supply linacs with both metal and non-metal ions. From the successful full-power test results, we confirmed that the IH and RFQ linacs work properly and then they are ready to accelerate heavy ions up to 1.09 MeV/nucleon. Since all tests and reorganization of the integrated control system were successful, it is supposed that the DIAC is now ready for beam tuning. Presently, construction of radiation shielded walls and radiation safety licensing are now in progress.

  3. Radio Astronomy in Malaysia: Current Status and Outreach Activities

    Science.gov (United States)

    Hashim, N.; Abidin, Z. Z.; Ibrahim, U. F. S. U.; Umar, R.; Hassan, M. S. R.; Rosli, Z.; Hamidi, Z. S.; Ibrahim, Z. A.

    2011-12-01

    In this paper, we will present the current status of radio astronomical research and outreach in Malaysia. We will also present a short history of our research group, which is currently the only radio astronomical facility in Malaysia. Our group is called the Radio Cosmology Research Lab and was established in 2005 by Dr Zamri Zainal Abidin and Prof Dr Zainol Abidin Ibrahim. We will discuss the future plans for this group including our keen interest in being part of a more global network of radio astronomers. We are already an active member of the South-East Asia Astronomy Network (SEAAN) and aims to have a radio astronomical facility in order to join the Global Very Long Baseline Interferometer (VLBI) as well becoming a research hub for the future Square Kilometer Array (SKA) project. We will also present some of the scientific goals of our group including providing a platform for radio astronomers to be able to do observations of weak and high red-shifted radio objects such as galaxy clusters and supernovae.

  4. Status of MCFC stack technology at IHI

    Energy Technology Data Exchange (ETDEWEB)

    Hosaka, M.; Morita, T.; Matsuyama, T.; Otsubo, M. [Ishikawajima-Harima Heavy Industries Co., Ltd., Tokyo (Japan)

    1996-12-31

    The molten carbonate fuel cell (MCFC) is a promising option for highly efficient power generation possible to enlarge. IHI has been studying parallel flow MCFC stacks with internal manifolds that have a large electrode area of 1m{sup 2}. IHI will make two 250 kW stacks for MW plant, and has begun to make cell components for the plant. To improve the stability of stack, soft corrugated plate used in the separator has been developed, and a way of gathering current from stacks has been studied. The DC output potential of the plant being very high, the design of electric insulation will be very important. A 20 kW short stack test was conducted in 1995 FY to certificate some of the improvements and components of the MW plant. These activities are presented below.

  5. Spent fuel management: Current status and prospects 1990

    International Nuclear Information System (INIS)

    1990-12-01

    Spent Fuel Management has always been one of the most important steps in the Nuclear Fuel Cycle and it still is one of the most vital and common problem for all countries. Projections for spent fuel arisings by the year 2010 range between 400,000 and 450,000 t of spent nuclear fuel. It is recognized that this fuel will either be stored and later disposed of in a deep geological repository (once-through fuel cycle) or stored and then reprocessed (closed fuel cycle). While some countries have concluded which choice they will make, others are applying the ''wait and see'' attitude. This continues to place great emphasis on short and long term storage technologies since much of the spent fuel will remain in storage in the next 20 years. The nuclear community recognizes the importance that design, technological, economic and material problems in spent fuel storage concepts and continues to encourage the international cooperation in such areas. This past year several nations have made decisions which impact on the projected storage volume (the Federal Republic of Germany has cancelled their reprocessing plant) and plan to contract the reprocessing with other nations. Argentina has delayed its reprocessing efforts. At the same time, while there are plans for recycle of plutonium in thermal reactors, the plans for its use in fast reactors have been delayed. These unforeseen changes reflect the constantly changing nature of the back-end of the fuel cycle and reinforce the importance of cooperation in these activities. The main objective of the Advisory Group on Spent Fuel Management is to review the world-wide situation in spent fuel management, to define the most important directions of national efforts and international cooperation, to exchange information on the present status and progress in performing the back-end of the nuclear fuel cycle and to elaborate recommendations for future Agency programmes in the field of spent fuel management. Refs, figs and tabs

  6. The Chernobyl NPP decommissioning: Current status and alternatives

    International Nuclear Information System (INIS)

    Mikolaitchouk, H.; Steinberg, N.

    1996-01-01

    After the Chernobyl accident of April 26, 1986, many contradictory decisions were taken concerning the Chernobyl nuclear power plant (NPP) future. The principal source of contradictions was a deadline for a final shutdown of the Chernobyl NPP units. Alterations in a political and socioeconomic environment resulted in the latest decision of the Ukrainian Authorities about 2000 as a deadline for a beginning of the Chernobyl NPP decommissioning. The date seems a sound compromise among the parties concerned. However, in order to meet the data a lot of work should be done. First of all, a decommissioning strategy has to be established. The problem is complicated due to both site-specific aspects and an absence of proven solutions for the RBMK-type reactor decommissioning. In the paper the problem of decommissioning option selection is considered taking into account an influence of the following factors: relevant legislative and regulatory requirements; resources required to carry out decommissioning (man-power, equipment, technologies, waste management infrastructure, etc.); radiological and physical status of the plant, including structural integrity and predictable age and weather effects; impact of planned activities at the destroyed unit 4 and within the 30-km exclusion zone of the Chernobyl NPP; planed use of the site; socio-economic considerations

  7. Current Status of The Low Frequency All Sky Monitor

    Science.gov (United States)

    Dartez, Louis; Creighton, Teviet; Jenet, Fredrick; Dolch, Timothy; Boehler, Keith; Bres, Luis; Cole, Brent; Luo, Jing; Miller, Rossina; Murray, James; Reyes, Alex; Rivera, Jesse

    2018-01-01

    The Low Frequency All Sky Monitor (LoFASM) is a distributed array of cross-dipole antennas that are sensitive to radio frequencies from 10 to 88 MHz. LoFASM consists of antennas and front end electronics that were originally developed for the Long Wavelength Array by the U.S. Naval Research Lab, the University of New Mexico, Virginia Tech, and the Jet Propulsion Laboratory. LoFASM, funded by the U.S. Department of Defense, will initially consist of 4 stations, each consisting of 12 dual- polarization dipole antenna stands. The primary science goals of LoFASM will be the detection and study of low-frequency radio transients, a high priority science goal as deemed by the National Research Council’s ASTRO2010 decadal survey. The data acquisition system for the LoFASM antenna array uses Field Programmable Gate Array (FPGA) technology to implement a real time full Stokes spectrometer and data recorder. This poster presents an overview of the LoFASM Radio Telescope as well as the status of data analysis of initial commissioning observations.

  8. Personal dosimetric monitoring in Ukraine: current status and further development

    International Nuclear Information System (INIS)

    Chumak, V. V.; Musijachenkom, A. V.; Boguslavskaya, A. I.

    2003-01-01

    Presently Ukraine has mixed system for dosimetric monitoring. Nuclear power plants and some major nuclear facilities have their own dosimetry services, which are responsible for regular dosimetric monitoring of workers. Rest of occupationally exposed persons is monitored by dosimetry laboratories affiliated to the territorial authorities for sanitary and epidemiology supervision. In 2002-2003 Ukrainian Ministry of Health performed survey of the status of dosimetric monitoring and inventory of critical groups requiring such monitoring. Dosimetry services in Ukraine cover about 38,000 occupationally exposed workers, including 9,100 medical professionals, 16,400 employees of 5 nuclear power plants and ca.12,400 workers dealing with other sources of occupational exposure (industry, research). Territorial dosimetry services operate in 13 of 24 regions of Ukraine, using DTU-01 manual TLD readers produced with one exception in 1988-1990. The coverage of critical groups by dosimetric monitoring is variable and ranges from 38% to 100% depending on the region. Personnel of nuclear power plants (about 16,400 workers) is monitored by their own dosimetry services achieving absolute coverage of the main staff and temporary workers. Current inadequate status of dosimetric monitoring infrastructure in Ukraine demands an urgent elaboration of the united state system for monitoring and recording of individual doses. The proposed plan would allows to bring dosimetry infrastructure in Ukraine to the modern state which would be compatible with existing and future European and international radiation protection networks. Unitary structure of Ukraine, strong administrative command and good communications between regions of the country are positive factors in favour of efficient implementation of the proposed plan. Deficiencies are associated with limited funding of this effort. (authors)

  9. Update on status of fluidized-bed combustion technology

    International Nuclear Information System (INIS)

    Stallings, J.; Boyd, T.; Brown, R.

    1992-01-01

    During the 1980s, fluidized-bed combustion technology has become the dominant technology for solid-fuel-fired power generation systems in the United States. Atmospheric fluidized beds as large as 160 MWe in capacity are now in operation, while pressurized systems reaching 80 MWe have started up in the last year. The commercial status, boiler performance, emissions, and future developments for both atmospheric and pressurized fluidized-bed combustion systems are discussed

  10. Research status and development of application fields in enzyme technology

    Science.gov (United States)

    Ji, Y. B.; Wang, S. W.; Yu, M.; Ru, X.; Wei, C.; Zhu, H. J.; Li, Z. Y.; Zhao, H.; Qiao, A. N.; Guo, S. Z.; Lu, L.

    2018-01-01

    Biological enzymes are catalyzed by living cells, most of which are proteins, and very few are RNA. Biological engineering as a new high-tech has been rapid development, Enzyme manufacturing and application areas are gradually expanding, In this paper, the status and progress of the application of enzyme technology are reviewed by reviewing the literature. and aims to provide reference for the application of enzyme technology and provide scientific basis for its future research and development in new field.

  11. Current status of hybrid, battery and fuel cell electric vehicles: From electrochemistry to market prospects

    International Nuclear Information System (INIS)

    Pollet, Bruno G.; Staffell, Iain; Shang, Jin Lei

    2012-01-01

    Decarbonising transport is proving to be one of today's major challenges for the global automotive industry due to many factors such as the increase in greenhouse gas and particulate emissions affecting not only the climate but also humans, the increase in pollution, rapid oil depletion, issues with energy security and dependency from foreign sources and population growth. For more than a century, our society has been dependent upon oil, and major breakthroughs in low- and ultra-low carbon technologies and vehicles are urgently required. This review paper highlights the current status of hybrid, battery and fuel cell electric vehicles from an electrochemical and market point of view. The review paper also discusses the advantages and disadvantages of using each technology in the automotive industry and the impact of these technologies on consumers.

  12. Current status and future prospects on nuclear industry in Korea

    International Nuclear Information System (INIS)

    Lee, Joongjae

    2006-01-01

    It is ny great pleasure to have this chance of speaking at twenty-first KAIF/KNS Annual Conference, with the subject of the current status and future prospects of nuclear industry in Korea. As you all know, since the start of operation in Obninsk, the former Soviet Union, on June 26th, 1954, nuclear generation in the world has expanded continuously for the past 50 years. In 1973, when the first oil crisis hit the world, there were 147 nuclear power plants in operation, supplying only 0.8% of the world energy demand. About 30 years later, by the end of last year, 443 plants were in operation in 32 countries, supplying about 16% of the world power demand. Nuclear power generation is greatly contributing to the energy security of many countries and preservation of global environments. Recently, countries all over the world are becoming aware of the values and importance of nuclear energy which can help respond to energy crises caused by a sharp rise in oil prices and protect the earth from global warming. Due to its high energy density and ability to secure fuel supply at a lower cost, in addition to its cleanliness resulting from almost no emission of greenhouse gases, nuclear power generation is the practical alternative for energy security and the prevention of global warming. However, in the rapidly changing 21st century, the nuclear industries of the world, as well as Korea, are facing more challenges than ever before. The political and social disputes on nuclear generation are continuing while we all are facing urgent challenges, including the concerns about the safety of nuclear generation, procuring site to build nuclear power plants, and the improvement of competitiveness. Please allow me to remind you that it is very important for the world's nuclear societies to cooperate together in order to overcome diverse difficulties along our path and to contribute to the development of mankind and preservation of natural environments with nuclear power as a

  13. Current status of RMS and technical experience for regional cooperation

    International Nuclear Information System (INIS)

    Kim, Jung-Soo

    2006-01-01

    The NNCA uses secure remote monitoring systems, both for reporting to the IAEA and for the bilateral cooperation with Sandia (SNL) and Idaho National Laboratory (INL). The NNCA system architecture has changed from a system using a Central Monitoring Station at the former TCNC, to direct internet reporting on a simultaneous basis to the IAEA and the NNCA. The NNCA reporting system is applied at 16 power reactors. This experience provides the basis for a detailed cost analysis and evaluation of trouble-shooting experience. Progress in establishing remote monitoring cooperation between the Korea Atomic Energy Research Institute's new Advanced Spent Fuel Conditioning Process Facility (ACPE) and Sandia is a precondition for regional cooperation. The ACPF system, which is currently in final testing, features network configuration and equipment that differ from safeguards standards for reasons of cost and flexibility. This allows the NNCA to take advantage of rapidly developing technologies at lower cost. (author)

  14. Cognitive function in older adults according to current socioeconomic status.

    Science.gov (United States)

    Zhang, Michael; Gale, Shawn D; Erickson, Lance D; Brown, Bruce L; Woody, Parker; Hedges, Dawson W

    2015-01-01

    Cognitive function may be influenced by education, socioeconomic status, sex, and health status. Furthermore, aging interacts with these factors to influence cognition and dementia risk in late life. Factors that may increase or decrease successful cognitive aging are of critical importance, particularly if they are modifiable. The purpose of this study was to determine if economic status in late life is associated with cognition independent of socioeconomic status in early life. Cross-sectional demographic, socioeconomic, and cognitive function data were obtained in 2592 older adults (average age 71.6 years) from the Center for Disease Control's National Health and Nutrition Examination Survey (NHANES) and analyzed with linear regression modeling. Cognitive function, as measured with a test of processing speed, was significantly associated with poverty index scores after adjusting for educational attainment as an estimate of childhood socioeconomic status, ethnic background, age, health status, and sex (P status is independently associated with cognitive function in adults over age 60 years.

  15. Anion Exchange Membranes: Current Status and Moving Forward

    Energy Technology Data Exchange (ETDEWEB)

    Hickner, MA; Herring, AM; Coughlin, EB

    2013-10-29

    This short review is meant to provide the reader with highlights in anion exchange membrane research, describe current needs in the field, and point out promising directions for future work. Anion exchange membranes (AEMs) provide one possible route to low platinum or platinum-free fuel cells with the potential for facile oxidation of complex fuels beyond hydrogen and methanol. AEMs and related stable cationic polymers also have applications in energy storage and other electrochemical technologies such as water electrolyzers and redox flow batteries. While anion exchange membranes have been known for a long time in water treatment applications, materials for electrochemical technology with robust mechanical properties in thin film format have only recently become more widely available. High hydroxide and bicarbonate anion conductivity have been demonstrated in a range of AEM formats, but intrinsic stability of the polymers and demonstration of long device lifetime remain major roadblocks. Novel approaches to stable materials have focused on new types of cations that employ delocalization and steric shielding of the positive center to mitigate nucleophilic attack by hydroxide. A number of promising polymer backbones and membrane architectures have been identified, but limited device testing and a lack of understanding of the degradation mechanisms in operating devices is slowing progress on engineered systems with alkaline fuel cell technology. Our objective is to spur more research in this area to develop fuel cell systems that approach the costs of inexpensive batteries for large-scale applications. (c) 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1727-1735, 2013

  16. Global Trends and Current Status of Commercial Urban Rooftop Farming

    Directory of Open Access Journals (Sweden)

    Devi Buehler

    2016-10-01

    Full Text Available The aim of this study was to analyze current practices in commercial urban rooftop farming (URF. In recent years, URF has been experiencing increasing popularity. It is a practice that is well-suited to enhancing food security in cities and reducing the environmental impact that results from long transportation distances that are common in conventional agriculture. To date, most URF initiatives have been motivated by social and educational factors rather than the aim of creating large sustainable food production systems in cities. The commercial operation of urban rooftop farms, should they become profitable, is likely to attract notable private investment, allowing a significant level of high quality urban food production to be achieved. There is a reasonable amount of literature available on urban farming that deals with its potential, and its limitations. However, it does not focus on commercial operations. In contrast to other surveys and theoretical papers, this study of URF focuses on large and commercial operations. The analysis showed that commercial URFs can be grouped into two main types: Firstly, hydroponic systems in greenhouses where mostly leafy greens, tomatoes, and herbs are grown; secondly, soil-based open-air farms that grow a large variety of vegetables. Hydroponics is frequently seen as the key technology for commercial urban food production. While the technology is not in and of itself sustainable, hydroponic farms often make an effort to implement environmentally friendly technologies and methods. However, there is still untapped potential to systemically integrate farms into buildings. The findings of this study identified where future research is needed in order to make URF a widespread sustainable solution.

  17. The current status of laser applications in dentistry.

    Science.gov (United States)

    Walsh, L J

    2003-09-01

    A range of lasers is now available for use in dentistry. This paper summarizes key current and emerging applications for lasers in clinical practice. A major diagnostic application of low power lasers is the detection of caries, using fluorescence elicited from hydroxyapatite or from bacterial by-products. Laser fluorescence is an effective method for detecting and quantifying incipient occlusal and cervical carious lesions, and with further refinement could be used in the same manner for proximal lesions. Photoactivated dye techniques have been developed which use low power lasers to elicit a photochemical reaction. Photoactivated dye techniques can be used to disinfect root canals, periodontal pockets, cavity preparations and sites of peri-implantitis. Using similar principles, more powerful lasers can be used for photodynamic therapy in the treatment of malignancies of the oral mucosa. Laser-driven photochemical reactions can also be used for tooth whitening. In combination with fluoride, laser irradiation can improve the resistance of tooth structure to demineralization, and this application is of particular benefit for susceptible sites in high caries risk patients. Laser technology for caries removal, cavity preparation and soft tissue surgery is at a high state of refinement, having had several decades of development up to the present time. Used in conjunction with or as a replacement for traditional methods, it is expected that specific laser technologies will become an essential component of contemporary dental practice over the next decade.

  18. Precision viticulture in Brazil: Current research status on wine grape

    Directory of Open Access Journals (Sweden)

    Miele Alberto

    2014-01-01

    Full Text Available Technologies associated to precision viticulture (PV are not currently used by Brazilian growers. To overcome this situation, a research is being carried out since 2011 in a vineyard of Merlot using a wide range of PV technologies. During this period, several PV research activities were performed which will be concluded in a couple of years. Therefore, final results depend on further variable evaluation which should be done by means of geostatistic, Geographic Information Systems and Principal Component Analysis. This paper briefly presents a series of methodological procedures used in different ways to attain the objective of this research project. In the sequence, it describes one final result and nine partial ones. Morphological and physicochemical analyses of soil showed that the vineyards are established on three taxonomic classes of soil – Argissolo, Cambissolo and Neossolo −, which are formed by ten mapping units. The partial results are mainly related to the utilization of GIS, modeling and must and wine composition of five mapping units; however they show results of only one year. With the complete set of analyses, data should be spatialized and maps prepared. Then, it will be possible to recommend different practices to each soil type and to aid oenologists to direct wines to a specific quality pattern.

  19. Client-Server Connection Status Monitoring Using Ajax Push Technology

    Science.gov (United States)

    Lamongie, Julien R.

    2008-01-01

    This paper describes how simple client-server connection status monitoring can be implemented using Ajax (Asynchronous JavaScript and XML), JSF (Java Server Faces) and ICEfaces technologies. This functionality is required for NASA LCS (Launch Control System) displays used in the firing room for the Constellation project. Two separate implementations based on two distinct approaches are detailed and analyzed.

  20. SaudiVeg ecoinformatics: Aims, current status and perspectives

    Directory of Open Access Journals (Sweden)

    Mohamed A. El-Sheikh

    2017-02-01

    Full Text Available During the last decade many electronic databases of vegetation plots were established in many countries around the world. These databases contain valuable phytosociological information assisting both governmental and NGO (Non-governmental organizations agencies to formulate strategies and on-ground plans to manage and protect nature resources. This paper provides an account on aims, current status and perspectives of building of a vegetation database for the Central Region (Najd of Saudi Arabia – the founding element of the Saudi Vegetation Database (SVD. The data stored by the database are sample plots (vegetation relevés collected according to the field techniques of the Braun-Blanquet approach (lists of taxa accompanied by semi-quantitative cover assessment, and are accompanied by general vegetation characteristics such as vegetation layering and cover, information on life-form of the recorded species, geographical coordinates, altitude, soil typology, topography and many more. More than 2900 vegetation-plot records (relevés have so far been collected in the Najd region; of these more than 2000 have already been stored using the Turboveg database platform. These field records cover many habitats such as depressions, wadis (dry river beds, agricultural lands, sand dunes, sabkhas, and ruderal habitats. The ecological information collected in the database is currently the largest set of vegetation data collated into a database in the Middle East. These data are of great importance for biodiversity studies in Saudi Arabia, since the region is recording a loss of biodiversity at a fast rate due to environmental problems such as global warming and land-use changes. We envisage that this database would catalyze further data collection on vegetation of the entire Arabian Peninsula, and shall serve as one of the most important datasets for classification and mapping of the vegetation of the Kingdom of Saudi Arabia.

  1. Current status of vaccines in psychiatry-A narrative review.

    Science.gov (United States)

    Kuppili, Pooja Patnaik; Manohar, Harshini; Menon, Vikas

    2018-02-15

    Vaccines are one of the newer therapeutic modalities being researched in psychiatric illnesses with limited role of pharmacological interventions. Preclinical studies on vaccines have shown favorable results in conditions like Substance use Disorders and Alzheimer's Dementia. However, the utility of Mumps Measles Rubella vaccine has been overshadowed by controversy linked to causation of Autism. With this background, the current narrative review aimed to comprehensively and critically evaluate the current status of vaccines in Psychiatric illnesses. Preliminary literature search using the electronic databases of MEDLINE and Google Scholar between May 1967 and May 2017 using the search terms "Vaccines" and "Psychiatry" was carried out and articles were found in the following areas of research: Substance use, Alzheimer Dementia, Autism, Human Immunodeficiency Virus and Human Papilloma Virus Further, the refined search was done using combinations of search terms "Vaccine", "Nicotine", "Cocaine", "Opioid", "Alzheimer Dementia", "Autism", and "Pervasive Developmental Disorders" and peer - reviewed original articles published in English conducted among human subjects and published in English language were included for review. A total of 31 articles found eligible were organized into appropriate sections synthesizing the literature on role of vaccines in specific disorders such as Substance Use Disorders, Alzheimer Dementia and Pervasive Developmental Disorders. The therapeutic potential of vaccines in Substance Use Disorders and Alzheimer Dementia was found to be limited in comparison to the results from animal studies. Safety profile of the immunogens and the adjuvants in humans is possibly the most important limitation. No causal association between Measles Mumps Rubella vaccine and Autism was found. Copyright © 2018 Elsevier B.V. All rights reserved.

  2. Robotic hepatobiliary surgery: update on the current status.

    Science.gov (United States)

    Carr, A D; Ali, M R; Khatri, V P

    2013-10-01

    An update on the current status of robotic hepatobiliary surgery based on a review of the available literature. A literature search was performed using the PubMed database with search phrases "robotic hepatectomy", "robotic liver resection", "robotic liver surgery", "robotic hepatobiliary surgery", and "robotic biliary reconstruction". We selected articles with high volume case series or case controlled series. As a result of our literature search we will focus on the 9 major articles on robotic liver resection (RLR) with 235 patients undergoing RLR for a total of 244 liver resections. In addition a brief update on robotic biliary reconstruction will also be presented based on the above articles and recent review articles. Indications for robotic liver resection included both benign (N.=72, 29.5%) and malignant disease (N.=172, 70.5%). The most common indication was colorectal liver metastasis (N.=87, 50.6%) and hepatocellular carcinoma (N.=57, 33%). The most common type of resection was subsegmental (N.=55, 22.5%), with a significant number of major hepatectomies (N.=80, 32.8%). Overall conversion rate was 7.8%, with majority converted to open (N.=18) and one converted to hand assisted. The overall complication rate was 11.8% (N.=29). No perioperative mortality was reported. Preliminary results show that robotic assisted laparoscopic hepatobiliary surgery has materialized as a new technique that combines the advantages of laparoscopy with the dissection, suturing and articulation of robotics. This more closely approximates open surgery. The preliminary data demonstrates that RLR can be applied in major hepatobiliary centers safely. Future comparative studies are needed to determine if this is of significant benefit over current open techniques.

  3. LNG - Status in Denmark. Technology and potential. Project report

    Energy Technology Data Exchange (ETDEWEB)

    Naeslund, M.

    2012-05-15

    The interest for LNG both on a small and a large scale is increasing worldwide. The experiences and knowledge on LNG is limited in Denmark. The Danish gas companies' Technical Management Group (TCG) has asked for a status report including a technology description and an evaluation of the potential in Denmark. A survey of primarily small-scale LNG technology is done in the report. The focus is motivated by the new areas of gas utilisation that become possible with small-scale LNG. Small-scale LNG in this study is defined as LNG stored and used at the application or in an isolated gas grid. The small-scale use of LNG has today an almost negligible share of the total LNG trade but offers interesting new applications for gas utilisation. LNG on a small scale can be used primarily as: 1) Ship fuel. 2) Truck fuel (heavy duty long distance). 3) Individual users not connected to the natural gas grid. 4) Backup for upgraded biogas to individual users and vehicle fleets. 5) Security of supply or supply enhancement of heavily loaded parts of the gas grid. 6) Small-scale storage and/or peak shaving. All but the first topics are natural uses for the current Danish gas distributors. LNG as ship fuel may engage other specialized LNG companies. The report contains a technical description of the parts in primarily small-scale LNG handling and operation. Liquefaction, transport, storage, engine technologies, gas quality and safety aspects related to LNG are covered. There seem to be two more or less separate paths for LNG in Denmark, onshore and off-shore use. These are not, apparently, sharing their experiences and knowledge. Rules and regulations are also different which may create some problems in the interface, for example ship bunkering. Further studies are suggested in the area of gas quality and engine technologies and adaptation of foreign guidelines for small-scale installations to Danish conditions. These guidelines ought to be based on international standards and

  4. Veterinary pharmacology: history, current status and future prospects.

    Science.gov (United States)

    Lees, P; Fink-Gremmels, J; Toutain, P L

    2013-04-01

    Veterinary therapeutics, based on the art of Materia Medica, has been practised for countless centuries, but the science of veterinary pharmacology is of very recent origin. This review traces the contribution of Materia Medica to veterinary therapeutics from the Egyptian period through to the Age of Enlightenment. The first tentative steps in the development of the science of veterinary pharmacology were taken in the 18th century, but it was not until the mid 20th century that the science replaced the art of Materia Medica. This review traces the 20th century developments in veterinary pharmacology, with emphasis on the explosion of knowledge in the 35 year period to 2010. The range of factors which have influenced the current status of the discipline are reviewed. Future developments are considered from the perspectives of what might be regarded as desirable and those innovations that might be anticipated. We end with words of encouragement for young colleagues intent upon pursuing a career in veterinary pharmacology. © 2013 Blackwell Publishing Ltd.

  5. Neural synchrony in cortical networks: history, concept and current status

    Directory of Open Access Journals (Sweden)

    Peter Uhlhaas

    2009-07-01

    Full Text Available Following the discovery of context-dependent synchronization of oscillatory neuronal responses in the visual system, the role of neural synchrony in cortical networks has been expanded to provide a general mechanism for the coordination of distributed neural activity patterns. In the current paper, we present an update of the status of this hypothesis through summarizing recent results from our laboratory that suggest important new insights regarding the mechanisms, function and relevance of this phenomenon. In the first part, we present recent results derived from animal experiments and mathematical simulations that provide novel explanations and mechanisms for zero and nero-zero phase lag synchronization. In the second part, we shall discuss the role of neural synchrony for expectancy during perceptual organization and its role in conscious experience. This will be followed by evidence that indicates that in addition to supporting conscious cognition, neural synchrony is abnormal in major brain disorders, such as schizophrenia and autism spectrum disorders. We conclude this paper with suggestions for further research as well as with critical issues that need to be addressed in future studies.

  6. The payloads of Advanced Virgo: current status and upgrades

    Science.gov (United States)

    Naticchioni, L.; Virgo Collaboration

    2018-02-01

    The development and integration of new detector payloads has been an important part of the Advanced Virgo (AdV) project, the major upgrade of the Virgo interferometric detector of Gravitational Waves, aiming to increase the detector sensitivity by one order of magnitude. During the integration phase of the new AdV payloads with monolithic suspension of mirrors we experienced systematic suspension failures later identified as caused by dust contamination of the vacuum system. In order to not postpone the detector commissioning, making possible to join the LIGO O2 observation run, the Collaboration decided to proceed with the integration of the payloads relying on steel wire suspensions for all the mirrors. In this proceeding the status of the currently integrated payloads is reported, including their angular control characterization and the Q-factor measurements for test mass steel wire suspensions. The payload upgrade for the re-integration of monolithic suspensions after the O2 run is reported in the last section.

  7. Current status and future trends of medical physics in Mexico

    International Nuclear Information System (INIS)

    Nieto, J Azorin

    2015-01-01

    Medical Physics is an area that applies the principles of physics to medicine, particularly in the prevention, diagnosis and treatment of diseases using ionizing and nonionizing radiation. The main attractive of medical physics is that it has a direct impact on the quality and safety of medical care in humans; this social component with direct implications for the population is of high value for Mexico. This paper describes the concepts of medical physics, trends and the current status of this discipline as a profession, which is directly related to the efforts of clinical research. It is also described what is, in my opinion, the future of medical physics in Mexico, emphasizing the fact that this field requires a substantial boost from universities and hospitals to recruit highly qualified young medical physicists and the support from government agencies such as Secretaria de Salud, Instituto Mexicano del Seguro Social and Instituto de Seguridad y Servicios Sociales para los Trabajadores del Estado through clinical research projects that allow the necessary evolution of medical physics into the hospital setting

  8. Collagen Cross-Linking: Current Status and Future Directions

    Directory of Open Access Journals (Sweden)

    Marine Hovakimyan

    2012-01-01

    Full Text Available Collagen cross-linking (CXL using UVA light and riboflavin (vitamin B2 was introduced as a clinical application to stabilize the cornea by inducing cross-links within and between collagen fibers. CXL has been investigated extensively and has been shown clinically to arrest the progression of keratoconic or post-LASIK ectasia. With its minimal cost, simplicity, and proven positive clinical outcome, CXL can be regarded as a useful approach to reduce the number of penetrating keratoplasties performed. Small case series have also indicated that CXL is beneficial in corneal edema by reducing stromal swelling behavior and in keratitis by inhibiting pathogen growth. Despite these encouraging results, CXL remains a relatively new method that is potentially associated with complications. Aspects such as side effects and recurrence rates have still to be elucidated. In light of the growing interest in CXL, our paper summarizes present knowledge about this promising approach. We have intentionally endeavored to include the more relevant studies from the recent literature to provide an overview of the current status of CXL.

  9. Current Status of Carl Sagan Observatory in Mexico

    Science.gov (United States)

    Sanchez-Ibarra, A.

    The current status of Observatory "Carl Sagan" (OCS) of University of Sonora is presented. This project was born in 1996 focused to build a small solar-stellar observatory completely operated by remote control. The observatory will be at "Cerro Azul", a 2480 m peak in one of the best regions in the world for astronomical observation, at the Sonora-Arizona desert. The OCS, with three 16 cm solar telescopes and a 55 cm stellar telescope is one of the cheapest observatories, valuated in US200,000 Added to its scientific goals to study solar coronal holes and Supernovae Type 1A, the OCS has a strong educative and cultural program in Astronomy to all levels. At the end of 2001, we started the Program "Constelacion", to build small planetariums through all the countries with a cost of only US80,000. Also, the webcast system for transmission of the solar observations from the prototype OCS at the campus, was expanded to webcast educational programs in Astronomy since July of this year, including courses and diplomats for Latin American people. All of these advances are exposed here.

  10. Radionuclide transport by groundwater flow through the geosphere: current status

    International Nuclear Information System (INIS)

    Lever, D.A.

    1989-02-01

    The geosphere is an important barrier retaining radionuclides that have been released from the near field of a waste repository and retarding their return to Man. The assessment models that are used in the current Nirex assessments to describe the groundwater flow in the vicinity of the repository and the transport of radionuclides by the groundwater are summarized, and their data requirements are set out. The Nirex research programme is designed to provide improved and additional data for these models, to deepen the understanding of the important processes and to develop improved models to describe them. This document outlines the status of the assessment models and associated research programme in the spring of 1988. The programme complements existing knowledge in this field. Key areas are measurements of the physical properties of rocks, field and modelling studies of fractured rocks, measurements of sorption onto geological materials, investigation of the possible importance of colloid transport and saline interfaces, transport of naturally occurring elements over geological time-scales in natural geochemical systems, and participation in an international model validation exercise. (author)

  11. Current status and progress of pancreatic cancer in China.

    Science.gov (United States)

    Lin, Quan-Jun; Yang, Feng; Jin, Chen; Fu, De-Liang

    2015-07-14

    Cancer is currently one of the most important public health problems in the world. Pancreatic cancer is a fatal disease with poor prognosis. As in most other countries, the health burden of pancreatic cancer in China is increasing, with annual mortality rates almost equal to incidence rates. The increasing trend of pancreatic cancer incidence is more significant in the rural areas than in the urban areas. Annual diagnoses and deaths of pancreatic cancer in China are now beyond the number of cases in the United States. GLOBOCAN 2012 estimates that cases in China account for 19.45% (65727/337872) of all newly diagnosed pancreatic cancer and 19.27% (63662/330391) of all deaths from pancreatic cancer worldwide. The population's growing socioeconomic status contributes to the rapid increase of China's proportional contribution to global rates. Here, we present an overview of control programs for pancreatic cancer in China focusing on prevention, early diagnosis and treatment. In addition, we describe key epidemiological, demographic, and socioeconomic differences between China and developed countries. Facts including no nationwide screening program for pancreatic cancer, delay in early detection resulting in a late stage at presentation, lack of awareness of pancreatic cancer in the Chinese population, and low investment compared with other cancer types by government have led to backwardness in China's pancreatic cancer diagnosis and treatment. Finally, we suggest measures to improve health outcomes of pancreatic cancer patients in China.

  12. Organ donation in China: current status, challenges, and future development.

    Science.gov (United States)

    Sui, Weiguo; Zheng, Can; Yang, Ming; Dai, Yong

    2014-12-01

    Development of effective immunosuppressive agents and advances in surgical practice are the main reasons for the success of transplantation in China. In some key areas such as liver, lung, and kidney transplants, Chinese transplant success rates are similar to the rates in developed countries. Organ donation also has developed rapidly. However, China is facing a serious organ shortage that restricts clinical treatment and medical research. This shortage is due to imperfect laws and improper management of organ donation, as well as Chinese traditional ethics. Finding an efficient way to make the number of donated organs keep pace with the need for organ transplants and to optimize allocation of organ resources is a long-term and arduous task. In some ways, Chinese organ donation nowadays is constrained more by legal issues than by medical issues. The current status of and challenges facing organ donation in China are analyzed with respect to ethics, management, laws, and policy, and the future development of transplantation in China is discussed.

  13. Cluff Lake decommissioning project - planning and current status

    International Nuclear Information System (INIS)

    Acott, G.; Pollock, R.

    2006-01-01

    The Cluff Lake Project, owned and operated by AREVA/COGEMA Resources Inc., is a uranium mining and milling facility in northern Saskatchewan, which commenced operation in 1980. The decommissioning plan for the Cluff Lake Project received regulatory approval in 2004, following a Comprehensive Study under the Canadian Environmental Assessment Act. The plan involves soil covers for an above-ground tailings area and a waste rock pile, completing the backfilling of an open pit with waste rock and flooding of two other open pits and of two underground mines. A large mill and associated infrastructure will also be demolished and disposed within the backfilled pit. Several alternative methods were considered for the decommissioning of each of the major areas. Success of the decommissioning will be judged by comparison to objectives established through the environmental assessment process. A comprehensive follow up program has been developed to monitor the key aspects, to demonstrate that the planning assumptions were appropriate and to ensure decommissioning will perform as designed. This paper summarizes the planning for decommissioning, and describes the current status and subsequent monitoring program. (author)

  14. The current status of theory evaluation in nursing.

    Science.gov (United States)

    Im, Eun-Ok

    2015-10-01

    To identify the current status of theory evaluation in nursing and provide directions for theory evaluation for future development of theoretical bases of nursing discipline. Theory evaluation is an essential component in development of nursing knowledge, which is a critical element in development of nursing discipline. Despite earlier significant efforts for theory evaluation in nursing, a recent decline in the number of theory evaluation articles was noted and there have been few updates on theory evaluation in nursing. Discussion paper. A total of 58 articles published from 2003-2014 were retrieved through searches using the PUBMED, PsyInfo and CINAHL. The articles were sorted by the area of evaluation and analysed to identify themes reflecting the theory evaluation process. Diverse ways of theory evaluation need to be continuously used in future theory evaluation efforts. Six themes reflecting the theory evaluation process were identified: (a) rarely using existing theory evaluation criteria; (b) evaluating specifics; (c) using various statistical analysis methods; (d) developing instruments; (e) adopting in practice and education; and (f) evaluating mainly middle-range theories and situation-specific theories. © 2015 John Wiley & Sons Ltd.

  15. Current status of the development of international exemption principles

    International Nuclear Information System (INIS)

    Kennedy, W.E. Jr.

    1988-01-01

    For the past several years, the International Atomic Energy Agency (IAEA) has been investigating the possibility of exempting certain radiation sources and practices from regulatory control. Initial efforts were conducted under the general heading of de minimis. Interest in this topic arises from international recognition that a significant fraction of the wastes from industry, research, medicine, and the nuclear fuel cycle are contaminated to such low levels that applying regulatory controls may be unwarranted. The IAEA evaluation has been conducted by Advisory Groups considering two interrelated topics: to establish principles for exemption, and to apply the principles to various areas of waste management. The IAEA Advisory Groups developed the criteria from modeled assessments of the potential radiation exposure pathways and scenarios for individuals and population groups following the unrestricted release of radioactive materials. Although the scenarios and models used by the IAEA are necessarily generic, consultants to the Advisory Groups attempted to identify the most important radiation exposure pathways based on available literature. This approach is intended to provide the basic framework for the numerical derivation of generic exempt quantities that would be conservative in most situations. This paper discusses the current status of the IAEA's efforts on the subject of exemption and presents the generic results expressed as overall exemption limits for municipal wastes and materials for recycle and reuse

  16. Anion exchange membrane fuel cells: Current status and remaining challenges

    Science.gov (United States)

    Gottesfeld, Shimshon; Dekel, Dario R.; Page, Miles; Bae, Chulsung; Yan, Yushan; Zelenay, Piotr; Kim, Yu Seung

    2018-01-01

    The anion exchange membrane fuel cell (AEMFC) is an attractive alternative to acidic proton exchange membrane fuel cells, which to date have required platinum-based catalysts, as well as acid-tolerant stack hardware. The AEMFC could use non-platinum-group metal catalysts and less expensive metal hardware thanks to the high pH of the electrolyte. Over the last decade, substantial progress has been made in improving the performance and durability of the AEMFC through the development of new materials and the optimization of system design and operation conditions. In this perspective article, we describe the current status of AEMFCs as having reached beginning of life performance very close to that of PEMFCs when using ultra-low loadings of Pt, while advancing towards operation on non-platinum-group metal catalysts alone. In the latter sections, we identify the remaining technical challenges, which require further research and development, focusing on the materials and operational factors that critically impact AEMFC performance and/or durability. These perspectives may provide useful insights for the development of next-generation of AEMFCs.

  17. Current status of accelerator-based boron neutron capture therapy

    International Nuclear Information System (INIS)

    Kreiner, A. J.; Bergueiro, J.; Di Paolo, H.; Castell, W.; Vento, V. Thatar; Cartelli, D.; Kesque, J.M.; Valda, A.A.; Ilardo, J.C.; Baldo, M.; Erhardt, J.; Debray, M.E.; Somacal, H.R.; Estrada, L.; Sandin, J.C. Suarez; Igarzabal, M.; Huck, H.; Padulo, J.; Minsky, D.M.

    2011-01-01

    The direct use of proton and heavy ion beams for radiotherapy is a well established cancer treatment modality, which is becoming increasingly widespread due to its clear advantages over conventional photon-based treatments. This strategy is suitable when the tumor is spatially well localized. Also the use of neutrons has a long tradition. Here Boron Neutron Capture Therapy (BNCT) stands out, though on a much smaller scale, being a second-generation promising alternative for tumors which are diffuse and infiltrating. On this sector, so far only nuclear reactors have been used as neutron sources. In this paper we describe the current situation worldwide as far as the use of accelerator-based neutron sources for BNCT is concerned (so-called Accelerator-Based (AB)-BNCT). In particular we discuss the present status of an ongoing project to develop a folded Tandem-ElectroStatic-Quadrupole (TESQ) accelerator at the Atomic Energy Commission of Argentina. The project goal is a machine capable of delivering 30 mA of 2.4 MeV protons to be used in conjunction with a neutron production target based on the 7 Li(p,n) 7 Be reaction. These are the specifications needed to produce sufficiently intense and clean epithermal neutron beams to perform BNCT for deep-seated tumors in less than an hour. (author)

  18. Plague in Iran: its history and current status

    Directory of Open Access Journals (Sweden)

    Abdolrazagh Hashemi Shahraki

    2016-07-01

    Full Text Available OBJECTIVES: Plague remains a public health concern worldwide, particularly in old foci. Multiple epidemics of this disease have been recorded throughout the history of Iran. Despite the long-standing history of human plague in Iran, it remains difficult to obtain an accurate overview of the history and current status of plague in Iran. METHODS: In this review, available data and reports on cases and outbreaks of human plague in the past and present in Iran and in neighboring countries were collected, and information was compiled regarding when, where, and how many cases occurred. RESULTS: This paper considers the history of plague in Persia (the predecessor of today’s Iran and has a brief review of plague in countries in the World Health Organization Eastern Mediterranean Region, including a range of countries in the Middle East and North Africa. CONCLUSIONS: Since Iran has experienced outbreaks of plague for several centuries, neighboring countries have reported the disease in recent years, the disease can be silent for decades, and the circulation of Yersinia pestis has been reported among rodents and dogs in western Iran, more attention should be paid to disease monitoring in areas with previously reported human cases and in high-risk regions with previous epizootic and enzootic activity.

  19. [Current research status of drug therapy for apnea of prematurity].

    Science.gov (United States)

    Chen, Chao; Shu, Xian-Xiao; Yang, Xiao-Yan; Shi, Jing; Tang, Jun; Mu, De-Zhi

    2016-09-01

    To investigate the current status of studies on drug therapy for apnea of prematurity (AOP) in the past decade in China and abroad, and to describe the research trends in the field. CNKI and MEDLINE were searched with the key words "apnea of prematurity" and "treatment" for articles published in the past decade (January 2006 to December 2015). The articles were screened and the key words were extracted to establish the co-occurrence matrix. Ucinet 6.2 was used to plot the knowledge map. A total of 26 Chinese key words and 20 English key words were included. Those in the center of the co-existent knowledge map of Chinses keywords were "preterm infants", "apnea", "primary apnea", "naloxone" and "aminophylline"; while "apnea", "preterm infants" and "caffeine" located in the central place of the co-existent knowledge map of English keywords. Methylxanthines are still the major drugs for AOP; however, aminophylline is mainly used in China, while caffeine is mainly used in foreign countries. Other drugs such as naltrexone are also used in the clinical treatment of AOP.

  20. Thorium-based nuclear fuel: current status and perspectives

    International Nuclear Information System (INIS)

    1987-03-01

    Until the present time considerable efforts have already been made in the area of fabrication, utilization and reprocessing of Th-based fuels for different types of reactors, namely: by FRG and USA - for HTRs; FRG and Brazil, Italy - for LWRs; India - for HWRs and FBRs. Basic research of thorium fuels and thorium fuel cycles are also being undertaken by Australia, Canada, China, France, FRG, Romania, USSR and other countries. Main emphasis has been given to the utilization of thorium fuels in once-through nuclear fuel cycles, but in some projects closed thorium-uranium or thorium-plutonium fuel cycles are also considered. The purpose of the Technical Committee on the Utilization of Thorium-Based Nuclear Fuel: Current Status and Perspective was to review the world thorium resources, incentives for further exploration, obtained experience in the utilization of Th-based fuels in different types of reactors, basic research, fabrication and reprocessing of Th-based fuels. As a result of the panel discussion the recommendations on future Agency activities and list of major worldwide activities in the area of Th-based fuel were developed. A separate abstract was prepared for each of the 9 papers in this proceedings series

  1. The current status and prospect of nuclear power in China

    International Nuclear Information System (INIS)

    Wei, S.

    2014-01-01

    'Full text:' China's nuclear power development has attracted world attention. This paper presented the current status of the nuclear power plant in China. By June 30, 2014, China has 20 operational units of 18.05GWe installed capacity, taking up 1.44% of the country's total. All the units have been operating well without any events above INES Level 1 in 2013. China also has 28 units of 30.5GWe installed capacity under construction, which accounts for around 40% of that in the world. The paper presented the progress of AP1000 in China. China made a national plan for 2011 to 2020 with the target to reach 58GWe operational nuclear power and 30GWe under construction by 2020. The Chinese President Xi Jinping urged recently to speed up the approval for new builds. This paper also presented the work of 'Go Global' by Chinese nuclear companies, i.e., their development of international market. (author)

  2. The current status and prospect of nuclear power in China

    Energy Technology Data Exchange (ETDEWEB)

    Wei, S. [State Nuclear Power Technology Corp., Beijing (China)

    2014-07-01

    'Full text:' China's nuclear power development has attracted world attention. This paper presented the current status of the nuclear power plant in China. By June 30, 2014, China has 20 operational units of 18.05GWe installed capacity, taking up 1.44% of the country's total. All the units have been operating well without any events above INES Level 1 in 2013. China also has 28 units of 30.5GWe installed capacity under construction, which accounts for around 40% of that in the world. The paper presented the progress of AP1000 in China. China made a national plan for 2011 to 2020 with the target to reach 58GWe operational nuclear power and 30GWe under construction by 2020. The Chinese President Xi Jinping urged recently to speed up the approval for new builds. This paper also presented the work of 'Go Global' by Chinese nuclear companies, i.e., their development of international market. (author)

  3. Current status and future trends of medical physics in Mexico

    Science.gov (United States)

    Azorin Nieto, J.

    2015-01-01

    Medical Physics is an area that applies the principles of physics to medicine, particularly in the prevention, diagnosis and treatment of diseases using ionizing and nonionizing radiation. The main attractive of medical physics is that it has a direct impact on the quality and safety of medical care in humans; this social component with direct implications for the population is of high value for Mexico. This paper describes the concepts of medical physics, trends and the current status of this discipline as a profession, which is directly related to the efforts of clinical research. It is also described what is, in my opinion, the future of medical physics in Mexico, emphasizing the fact that this field requires a substantial boost from universities and hospitals to recruit highly qualified young medical physicists and the support from government agencies such as Secretaria de Salud, Instituto Mexicano del Seguro Social and Instituto de Seguridad y Servicios Sociales para los Trabajadores del Estado through clinical research projects that allow the necessary evolution of medical physics into the hospital setting.

  4. Cn(n=2-4): current status

    Science.gov (United States)

    Varandas, A. J. C.; Rocha, C. M. R.

    2018-03-01

    The major aspects of the C2, C3 and C4 elemental carbon clusters are surveyed. For C2, a brief analysis of its current status is presented. Regarding C3, the most recent results obtained in our group are reviewed with emphasis on modelling its potential energy surface which is particularly complicated due to the presence of multiple conical intersections. As for C4, the most stable isomeric forms of both triplet and singlet spin states and their possible interconversion pathways are examined afresh by means of accurate ab initio calculations. The main strategies for modelling the ground triplet C4 potential are also discussed. Starting from a truncated cluster expansion and a previously reported DMBE form for C3, an approximate four-body term is calibrated from the ab initio energies. The final six-dimensional global DMBE form so obtained reproduces all known topographical aspects while providing an accurate description of the C4 linear-rhombic isomerization pathway. It is therefore commended for both spectroscopic and reaction dynamics studies. This article is part of the theme issue `Modern theoretical chemistry'.

  5. Current status of Joint FAA/NASA Runway Friction Program

    Science.gov (United States)

    Yager, Thomas J.; Vogler, William A.

    1989-01-01

    Tests with specially instrumented NASA B-737 and FAA B-727 aircraft together with several different ground friction measuring devices have been conducted for a variety of runway surface types and wetness conditions. This effort is part of the Joint FAA/NASA Aircraft Ground Vehicle Runway Friction Program aimed at obaining a better understanding of aircraft ground handling performance under adverse weather conditions and defining relationships between aircraft and ground vehicle tire friction measurements. Aircraft braking performance on dry, wet, snow-, and ice-covered runway conditions is discussed together with ground vehicle friction data obtained under similar runway conditions. For the wet, compacted snow- and ice-covered runway conditions, the relationship between ground vehicles and aircraft friction data is identified. The influence of major test parameters on friction measurements such as speed, test tire characteristics, and surface contaminant type are discussed. The test results indicate that use of properly maintained and calibrated ground vehicles for monitoring runway friction conditions should be encouraged particularly under adverse weather conditions. The current status of the runway friction program is summarized and future test plans are identified.

  6. Veterinary public health in India: current status and future needs.

    Science.gov (United States)

    Ghatak, S; Singh, B B

    2015-12-01

    Veterinary public health (VPH) assumes huge significance in developing countries such as India. However, the implementation of VPH services throughout the country is still in its infancy. From 1970 onwards, many institutes, national and international organisations, professional societies, policies and personalities have contributed towards the development of VPH in India. Nevertheless, there is an urgent need to develop VPH still further as there are many issues, such as high population density, the re-emergence of zoonotic pathogens, environmental pollution and antimicrobial resistance, that require attention. The time has surely come to involve all stakeholders, ranging from primary producers (e.g., farmers) to policy-makers, so as to garner support for the holistic implementation of VPH services in India. To improve VPH activities and services, science-based policies enforced through stringent regulation are required to improve human, animal and environmental health. The emergence of the 'One Health' concept has ushered in new hopes for the resurrection of VPH in India. Applying tools such as the World Organisation for Animal Health (OlE) Day One Competencies and the OlE Tool for the Evaluation of Performance of Veterinary Services (PVS Tool) is essential to improve the quality of national Veterinary Services and to identify gaps and weaknesses in service provision, which can be remedied to comply with the OlE international standards. VPH initiatives started modestly but they continue to grow. The present review is focused on the current status and future needs of VPH in India.

  7. Current Status of Mycotoxin Contamination of Food Commodities in Zimbabwe

    Directory of Open Access Journals (Sweden)

    Nancy Nleya

    2018-05-01

    Full Text Available Agricultural products, especially cereal grains, serve as staple foods in sub-Saharan Africa. However, climatic conditions in this region can lead to contamination of these commodities by moulds, with subsequent production of mycotoxins posing health risks to both humans and animals. There is limited documentation on the occurrence of mycotoxins in sub-Saharan African countries, leading to the exposure of their populations to a wide variety of mycotoxins through consumption of contaminated foods. This review aims at highlighting the current status of mycotoxin contamination of food products in Zimbabwe and recommended strategies of reducing this problem. Zimbabwe is one of the African countries with very little information with regards to mycotoxin contamination of its food commodities, both on the market and at household levels. Even though evidence of multitoxin occurrence in some food commodities such as maize and other staple foods exist, available published research focuses only on Aspergillus and Fusarium mycotoxins, namely aflatoxins, deoxynivalenol (DON, trichothecenes, fumonisins, and zearalenone (ZEA. Occurrence of mycotoxins in the food chain has been mainly associated with poor agricultural practices. Analysis of mycotoxins has been done mainly using chromatographic and immunological methods. Zimbabwe has adopted European standards, but the legislation is quite flexible, with testing for mycotoxin contamination in food commodities being done voluntarily or upon request. Therefore, the country needs to tighten its legislation as well as adopt stricter standards that will improve the food safety and security of the masses.

  8. The UPM high temperature solar collector current status

    International Nuclear Information System (INIS)

    Mahdi Abdul Wahab; Mohd Yusof Sulaiman; Azmi Zakaria

    2000-01-01

    The high temperature solar energy research at Universiti Putra Malaysia (UPM) is an attempt to study the merits of the fixed aperture optics collector for the equatorial region using the concept of the fixed mirror distributed focus (FMDF). The general objective is to look for an alternative source of clean energy and a practical method of converting this energy to usable form for the projected industrialisation program of the country. The FMDF uses a stationary hemisphere bowl to capture the solar irradiance. The UPM bowl has a rim angle of 120 0 with radius of curvature of 27.9 m. This corresponds to an aperture diameter of 48 m and submerges 5.1 m in the ground. The bowl will later be tiled with 2446 square meters of mirror to form a spherical shape. And therefore will be able to collect about 1 MW of solar irradiance at the conical focus formed along the direction of the radius (high concentrated region) which then can be harnessed by different means. In this paper, we will report the current status and future works of the project, under construction at the site. We anticipate that the project will be completed and operated by the year 2000. (Author)

  9. BIOINFORMATICS SOFTWARE FROM INDIA: CURRENT STATUS AND CHALLENGES

    Directory of Open Access Journals (Sweden)

    Deepti D. Deobagkar

    2017-09-01

    Full Text Available Bioinformatics software and visualisation tools have been a key factor in the rapid and phenomenal advances in genomics, proteomics, medicine, drug discovery, systems approaches and in fact in every area of new development. Indian scientists have also made a mark in a few specific areas. India has an advantage of an early start and extensive and organised network in the Bioinformatics education and research with substantial inputs from the Indian government. India has a strong hold in computation and IT and has a pool of bright and young talent with demographic dividend along with experienced and excellent mentors and researchers. Although small in number and scale, Bioinformatics Industry also has a presence and is making its mark in India. There are a number of high throughput and extremely useful resources available which are critical in biological data analysis and interpretation. This has made a paradigm shift in the way research can be carried out and discoveries can be made in any area of biological, biochemical and chemical research. This article summarises the current status and contributions from India in the development of software and web servers for Bioinformatics applications.

  10. Current status of acupuncture and moxibustion in China.

    Science.gov (United States)

    Lim, Min Yee; Huang, Jian; Zhao, Baixiao; Ha, Lue

    2015-01-01

    Acupuncture and moxibustion are more integrated in the Chinese healthcare system than in the national healthcare systems of other countries. Development of acupuncture and moxibustion in China is making progress in this field. For overseas researchers, this commentary offers perspectives on the current status of acupuncture and moxibustion in China and examines relevant opportunities and challenges in healthcare reforms. There has been a steady increase in the number of undergraduates and postgraduates studying acupuncture and moxibustion in Chinese Medicine (CM) universities in China over the past decade. The legislation of CM physicians that was established in 1999 and the launch of continuing medical education in CM in 2002 have ensured the basic competency of practitioners. The Chinese Government has also shown support for CM development by increasing investment in related fields of research and administration. New challenges have emerged as the healthcare landscape in China has evolved over the past decade. It is important to harness the potential of acupuncture and moxibustion to create a value-driven healthcare system that meets the health needs of a rapidly aging society.

  11. Current status of animal welfare and animal rights in China.

    Science.gov (United States)

    Lu, Jiaqi; Bayne, Kathryn; Wang, Jianfei

    2013-11-01

    In the past few years, new social passions have sparked on the Chinese mainland. At the centre of these burgeoning passions is a focus on animal welfare, animal treatment, and even animal rights, by the public and academic sectors. With China's rapid economic changes and greater access to information from around the world, societal awareness of animal issues is rising very fast. Hastening this paradigm shift were several highly public incidents involving animal cruelty, including exposés on bear bile harvesting for traditional Chinese medicine, the thousands of dogs rescued from China's meat trade, and the call to boycott shark fin soup and bird nest soup. This article outlines the current status of campaigning by animal advocates in China (specifically the animal rights movement) from three interlinked perspectives: wildlife conservation, companion animal protection, and laboratory animal protection. By reviewing this campaigning, we attempt to present not only the political and social impact of the concept of animal rights, but also the perceptions of, and challenges to, animal rights activities in China. 2013 FRAME.

  12. Solar water heating in Lebanon: Current status and future prospects

    International Nuclear Information System (INIS)

    Houri, Ahmad

    2006-01-01

    The use of solar thermal collectors is an economic alternative for water heating in Lebanon. More than 100,000m 2 of collector area has been installed while the market can accommodate more than 1.5 million m 2 . The domestic sector, which is a main energy-consuming sector, stands to benefit the most from the implementation of such systems. Despite the lack of encouraging legislation, the solar thermal market has been continuously growing over the past decade. Both local manufacturers and importers have been active in the field. In addition, advanced forced circulation and collective systems are being used in large establishments, individual house and apartment buildings. Internationally funded demonstration projects using collective systems have been implemented in recent years with promising results. Simplified initial estimates indicate a payback period of 4-5 years while advanced mathematical models (RETScreen) indicate that the most advanced evacuated tube technology has a payback period of less than 9 years at current market prices. With decreasing cost per square meter of installed collectors, payback periods are expected to rapidly decrease. Regulatory support and tax breaks, if implemented, will have a positive effect on the market. The current increases in diesel prices are increasing demand on solar thermal water heaters. [Author

  13. Status note on solar cell technology; Statusnotat om solcelleteknologi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This status note briefly describes development and perspectives for solar cell technology internationally and nationally. The note will form part of the background for a coming proposal for a national solar cell strategy. The strategy will be prepared by the Danish Energy Authority in collaboration with the Ministry of Science, Technology and Innovation, Elkraft System, Eltra, representatives from the industry and others. The proposal is expected to give an overall picture of Danish R and D niches and opportunities within solar cell technology. (BA)

  14. Current status and recent developments of industrial radioisotope applications in Japan

    International Nuclear Information System (INIS)

    Tominaga, Hiroshi

    1985-01-01

    The current status of application of radioisotopes to industry in Japan is briefly reviewed. Radioisotope gauges are widely used in industry, but most of the radioactive tracer applications are performed in laboratories. as for the recent developments, it is noted that the majority of them are related to high technologies in industry. Some typical examples are described. They include: high accuracy coke moisture guage--dual channel gauging on-line analyzers based on 252 Cf, simultaneous neutron and gamma radiography; tracer techniques in civil engineering field, electronics industry, automobile industry and iron and steel industry.(M.G.B.)

  15. Current status of insecticide resistance among malaria vectors in Kenya.

    Science.gov (United States)

    Ondeto, Benyl M; Nyundo, Christopher; Kamau, Luna; Muriu, Simon M; Mwangangi, Joseph M; Njagi, Kiambo; Mathenge, Evan M; Ochanda, Horace; Mbogo, Charles M

    2017-09-19

    Insecticide resistance has emerged as one of the major challenges facing National Malaria Control Programmes in Africa. A well-coordinated national database on insecticide resistance (IRBase) can facilitate the development of effective strategies for managing insecticide resistance and sustaining the effectiveness of chemical-based vector control measures. The aim of this study was to assemble a database on the current status of insecticide resistance among malaria vectors in Kenya. Data was obtained from published literature through PubMed, HINARI and Google Scholar searches and unpublished literature from government reports, research institutions reports and malaria control programme reports. Each data source was assigned a unique identification code and entered into Microsoft Excel 2010 datasheets. Base maps on the distribution of insecticide resistance and resistance mechanisms among malaria vectors in Kenya were generated using ArcGIS Desktop 10.1 (ESRI, Redlands, CA, USA). Insecticide resistance status among the major malaria vectors in Kenya was reported in all the four classes of insecticides including pyrethroids, carbamates, organochlorines and organophosphates. Resistance to pyrethroids has been detected in Anopheles gambiae (s.s.), An. arabiensis and An. funestus (s.s.) while resistance to carbamates was limited to An. gambiae (s.s.) and An. arabiensis. Resistance to the organochlorine was reported in An. gambiae (s.s.) and An. funestus (s.s.) while resistance to organophosphates was reported in An. gambiae (s.l.) only. The mechanisms of insecticide resistance among malaria vectors reported include the kdr mutations (L 1014S and L 1014F) and elevated activity in carboxylesterase, glutathione S-transferases (GST) and monooxygenases. The kdr mutations L 1014S and L 1014F were detected in An. gambiae (s.s.) and An. arabiensis populations. Elevated activity of monooxygenases has been detected in both An. arabiensis and An. gambiae (s.s.) populations while

  16. Current status and future perspectives of electron interactions with molecules, clusters, surfaces, and interfaces [Workshop on Fundamental challenges in electron-driven chemistry; Workshop on Electron-driven processes: Scientific challenges and technological opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Becker, Kurt H.; McCurdy, C. William; Orlando, Thomas M.; Rescigno, Thomas N.

    2000-09-01

    This report is based largely on presentations and discussions at two workshops and contributions from workshop participants. The workshop on Fundamental Challenges in Electron-Driven Chemistry was held in Berkeley, October 9-10, 1998, and addressed questions regarding theory, computation, and simulation. The workshop on Electron-Driven Processes: Scientific Challenges and Technological Opportunities was held at Stevens Institute of Technology, March 16-17, 2000, and focused largely on experiments. Electron-molecule and electron-atom collisions initiate and drive almost all the relevant chemical processes associated with radiation chemistry, environmental chemistry, stability of waste repositories, plasma-enhanced chemical vapor deposition, plasma processing of materials for microelectronic devices and other applications, and novel light sources for research purposes (e.g. excimer lamps in the extreme ultraviolet) and in everyday lighting applications. The life sciences are a rapidly advancing field where the important role of electron-driven processes is only now beginning to be recognized. Many of the applications of electron-initiated chemical processes require results in the near term. A large-scale, multidisciplinary and collaborative effort should be mounted to solve these problems in a timely way so that their solution will have the needed impact on the urgent questions of understanding the physico-chemical processes initiated and driven by electron interactions.

  17. Status of liquid metal cooled fast reactor technology

    International Nuclear Information System (INIS)

    1999-04-01

    During the period 1985-1998, there have been substantial advances in fast reactor technology development. Chief among these has been the demonstration of reliable operation by several prototypes and experimental reactors, the reliable operation of fuel at high burnup. At the IAEA meetings on liquid metal cooled fast reactor technology (LMFR), it became evident that there have been significant technological advances as well as changes in the economic and regulatory environment since 1985. Therefore the International working group on Fast Reactors has recommended the preparation of a new status report on fast reactors. The present report intends to provide comprehensive and detailed information on LMFR technology. The focus is on practical issues that are useful to engineers, scientists, managers, university students and professors, on the following topics: experience in construction and operation, reactor physics and safety, sore structural material and fuel technology, fast reactor engineering and activities in progress on LMFR plants

  18. Integrated Magnetic MEMS Relays: Status of the Technology

    Directory of Open Access Journals (Sweden)

    Giuseppe Schiavone

    2014-08-01

    Full Text Available The development and application of magnetic technologies employing microfabricated magnetic structures for the production of switching components has generated enormous interest in the scientific and industrial communities over the last decade. Magnetic actuation offers many benefits when compared to other schemes for microelectromechanical systems (MEMS, including the generation of forces that have higher magnitude and longer range. Magnetic actuation can be achieved using different excitation sources, which create challenges related to the integration with other technologies, such as CMOS (Complementary Metal Oxide Semiconductor, and the requirement to reduce power consumption. Novel designs and technologies are therefore sought to enable the use of magnetic switching architectures in integrated MEMS devices, without incurring excessive energy consumption. This article reviews the status of magnetic MEMS technology and presents devices recently developed by various research groups, with key focuses on integrability and effective power management, in addition to the ability to integrate the technology with other microelectronic fabrication processes.

  19. Assessing the nutritional status of beef cattle: current practices and ...

    African Journals Online (AJOL)

    Accurate determination of nutritional and health status of animals is invaluable in modern animal agriculture. Body weights and body condition scoring are the commonly used methods of assessing nutritional status of animals. This paper discusses drawbacks these methods have and highlights the benefits for using blood ...

  20. Acceptability of Marital Violence among College Men and Women: Does Gender and Current Relationship Status Matter?

    Science.gov (United States)

    Merten, Michael J.; Williams, Amanda L.

    2009-01-01

    The purpose of this study was to examine the role of gender, current relationship status, and the interaction between gender and relationship status on the acceptability of marital violence among college men and women. Participants completed a questionnaire containing measures of marital violence acceptability and current relationship status.…

  1. Current status of non-invasive prenatal testing in Japan.

    Science.gov (United States)

    Samura, Osamu; Sekizawa, Akihiko; Suzumori, Nobuhiro; Sasaki, Aiko; Wada, Seiji; Hamanoue, Haruka; Hirahara, Fumiki; Sawai, Hideaki; Nakamura, Hiroaki; Yamada, Takahiro; Miura, Kiyonori; Masuzaki, Hideaki; Nakayama, Setsuko; Okai, Takashi; Kamei, Yoshimasa; Namba, Akira; Murotsuki, Jun; Tanemoto, Tomohiro; Fukushima, Akimune; Haino, Kazufumi; Tairaku, Shinya; Matsubara, Keiichi; Maeda, Kazuhisa; Kaji, Takashi; Ogawa, Masanobu; Osada, Hisao; Nishizawa, Haruki; Okamoto, Yoko; Kanagawa, Takeshi; Kakigano, Aiko; Kitagawa, Michihiro; Ogawa, Masaki; Izumi, Shunichiro; Katagiri, Yukiko; Takeshita, Naoki; Kasai, Yasuyo; Naruse, Katsuhiko; Neki, Reiko; Masuyama, Hisashi; Hyodo, Maki; Kawano, Yukie; Ohba, Takashi; Ichizuka, Kiyotake; Kido, Yasuhiro; Fukao, Toshiyuki; Miharu, Norio; Nagamatsu, Takeshi; Watanabe, Atsushi; Hamajima, Naoki; Hirose, Masaya; Sanui, Ayako; Shirato, Nahoko; Yotsumoto, Junko; Nishiyama, Miyuki; Hirose, Tatsuko; Sago, Haruhiko

    2017-08-01

    The purpose of this study was to report the 3-year experience of a nationwide demonstration project to introduce non-invasive prenatal testing (NIPT) of maternal plasma for aneuploidy, and review the current status of NIPT in Japan. Tests were conducted to detect aneuploidy in high-risk pregnant women, and adequate genetic counseling was provided. The clinical data, test results, and pregnancy outcomes were recorded. We discuss the problems of NIPT on the basis of published reports and meta-analyses. From April 2013 to March 2016, 30 613 tests were conducted at 55 medical sites participating in a multicenter clinical study. Among the 30 613 women tested, 554 were positive (1.81%) and 30 021 were negative (98.1%) for aneuploidy. Of the 289, 128, and 44 women who tested positive for trisomies 21, 18, and 13, respectively, and underwent definitive testing, 279 (96.5%), 106 (82.8%), and 28 (63.6%) were determined to have a true-positive result. For the 13 481 women with negative result and whose progress could be traced, two had a false-negative result (0.02%). The tests were performed on the condition that a standard level of genetic counseling be provided at hospitals. Here, we report on the 3-year nationwide experience with NIPT in Japan. It is important to establish a genetic counseling system to enable women to make informed decisions regarding prenatal testing. Moreover, a welfare system is warranted to support women who decide to give birth to and raise children with chromosomal diseases. © 2017 Japan Society of Obstetrics and Gynecology.

  2. Current and Future Status of Diversity in Ophthalmologist Workforce.

    Science.gov (United States)

    Xierali, Imam M; Nivet, Marc A; Wilson, M Roy

    2016-09-01

    Increasing the level of diversity among ophthalmologists may help reduce disparities in eye care. To assess the current and future status of diversity among ophthalmologists in the workforce by sex, race, and ethnicity in the context of the available number of medical students in the United States. Data from the Association of American Medical Colleges, the American Medical Association, and US Census were used to evaluate the differences and trends in diversity among ophthalmologists, all full-time faculty except ophthalmology, ophthalmology faculty, ophthalmology residents, medical school students, and the US population between 2005 and 2015. For 2014, associations of sex, race, and ethnicity with physician practice locations were assessed. Proportions of ophthalmologists stratified by sex, race, and ethnicity between 2005 and 2015. Women and minority groups traditionally underrepresented in medicine (URM)-black, Hispanic, American Indian, Alaskan Native, Native Hawaiian, and Pacific Islander-were underrepresented as practicing ophthalmologists (22.7% and 6%, respectively), ophthalmology faculty (35.1% and 5.7%, respectively), and ophthalmology residents (44.3% and 7.7%, respectively), compared with the US population (50.8% and 30.7%, respectively). During the past decade, there had been a modest increase in the proportion of female practicing ophthalmologists who graduated from US medical schools in 1980 or later (from 23.8% to 27.1%; P workforce despite an available pool of medical students. Given the prevalent racial and ethnic disparities in eye care and an increasingly diverse society, future research and training efforts that increase the level of diversity among medical students and residents seems warranted.

  3. Genomic resources in fruit plants: an assessment of current status.

    Science.gov (United States)

    Rai, Manoj K; Shekhawat, N S

    2015-01-01

    The availability of many genomic resources such as genome sequences, functional genomics resources including microarrays and RNA-seq, sufficient numbers of molecular markers, express sequence tags (ESTs) and high-density genetic maps is causing a rapid acceleration of genetics and genomic research of many fruit plants. This is leading to an increase in our knowledge of the genes that are linked to many horticultural and agronomically important traits. Recently, some progress has also been made on the identification and functional analysis of miRNAs in some fruit plants. This is one of the most active research fields in plant sciences. The last decade has witnessed development of genomic resources in many fruit plants such as apple, banana, citrus, grapes, papaya, pears, strawberry etc.; however, many of them are still not being exploited. Furthermore, owing to lack of resources, infrastructure and research facilities in many lesser-developed countries, development of genomic resources in many underutilized or less-studied fruit crops, which grow in these countries, is limited. Thus, research emphasis should be given to those fruit crops for which genomic resources are relatively scarce. The development of genomic databases of these less-studied fruit crops will enable biotechnologists to identify target genes that underlie key horticultural and agronomical traits. This review presents an overview of the current status of the development of genomic resources in fruit plants with the main emphasis being on genome sequencing, EST resources, functional genomics resources including microarray and RNA-seq, identification of quantitative trait loci and construction of genetic maps as well as efforts made on the identification and functional analysis of miRNAs in fruit plants.

  4. Current status of genome editing in vector mosquitoes: A review.

    Science.gov (United States)

    Reegan, Appadurai Daniel; Ceasar, Stanislaus Antony; Paulraj, Michael Gabriel; Ignacimuthu, Savarimuthu; Al-Dhabi, Naif Abdullah

    2017-01-16

    Mosquitoes pose a major threat to human health as they spread many deadly diseases like malaria, dengue, chikungunya, filariasis, Japanese encephalitis and Zika. Identification and use of novel molecular tools are essential to combat the spread of vector borne diseases. Genome editing tools have been used for the precise alterations of the gene of interest for producing the desirable trait in mosquitoes. Deletion of functional genes or insertion of toxic genes in vector mosquitoes will produce either knock-out or knock-in mutants that will check the spread of vector-borne diseases. Presently, three types of genome editing tools viz., zinc finger nuclease (ZFN), transcription activator-like effector nucleases (TALEN) and clustered regulatory interspaced short palindromic repeats (CRISPR) and CRISPR associated protein 9 (Cas9) are widely used for the editing of the genomes of diverse organisms. These tools are also applied in vector mosquitoes to control the spread of vector-borne diseases. A few studies have been carried out on genome editing to control the diseases spread by vector mosquitoes and more studies need to be performed with the utilization of more recently invented tools like CRISPR/Cas9 to combat the spread of deadly diseases by vector mosquitoes. The high specificity and flexibility of CRISPR/Cas9 system may offer possibilities for novel genome editing for the control of important diseases spread by vector mosquitoes. In this review, we present the current status of genome editing research on vector mosquitoes and also discuss the future applications of vector mosquito genome editing to control the spread of vectorborne diseases.

  5. Multi-observation integrated model of troposphere - current status

    Science.gov (United States)

    Wilgan, Karina; Rohm, Witold; Bosy, Jarosław; Sierny, Jan; Kapłon, Jan; Hadaś, Tomasz; Hordyniec, Paweł

    2014-05-01

    The Global Navigation Satellite Systems (GNSS) and meteorological observation systems in the past decades were developed to address separate challenges and were used by different communities. Currently, the inter-dependence between meteorology and GNSS processing is growing up, providing both communities incentives, data and research challenges. The GNSS community uses meteorological observations as well as Numerical Weather Prediction (NWP) models to reduce the troposphere impact on the signal propagation (i.e. eliminate tropospheric delay). On the other hand, meteorology community is assimilating the GNSS observations into weather forecasting, nowcasting or climate studies. To seamlessly use observations from both sides of the GNSS and meteorology spectra, the data have to be interoperable. In this study we present a current status of establishing an integrated model of troposphere. We investigated and compared a number of meteorological and GNSS data sources that are going to be integrated into the troposphere model with high temporal and spatial resolution. The integrated model will provide values of meteorological and GNSS parameters at any point and any time with known accuracy. First step in building this model is to inter-compare all available data sources and to establish the accuracy of parameters. Three main data sources were compared: ground-based GNSS products on ASG-EUPOS stations, NWP model COAMPS (Coupled Ocean/ Atmosphere Mesoscale Prediction System) and meteorological parameters from three kinds of stations - EUREF Permanent Network (EPN) stations, meteorological sensors at airports and synoptic Institute of Meteorology and Water Management. Data was provided with different temporal and spatial resolution, so it had to be interpolated prior to inter-comparison. Afterwards, the quality of the data was established. The results show that NWP model data quality is: 4hPa in terms of air pressure, 2hPa in terms of water vapor partial pressure, and 6K in

  6. Biomass torrefaction technology: Techno-economic status and future prospects

    International Nuclear Information System (INIS)

    Batidzirai, B.; Mignot, A.P.R.; Schakel, W.B.; Junginger, H.M.; Faaij, A.P.C.

    2013-01-01

    Torrefaction is a promising bioenergy pre-treatment technology, with potential to make a major contribution to the commodification of biomass. However, there is limited scientific knowledge on the techno-economic performance of torrefaction. This study therefore improves available knowledge on torrefaction by providing detailed insights into state of the art prospects of the commercial utilisation of torrefaction technology over time. Focussing on and based on the current status of the compact moving bed reactor, we identify process performance characteristics such as thermal efficiency and mass yield and discuss their determining factors through analysis of mass and energy balances. This study has shown that woody biomass can be torrefied with a thermal and mass efficiency of 94% and 48% respectively (on a dry ash free basis). For straw, the corresponding theoretical energetic efficiency is 96% and mass efficiency is 65%. In the long term, the technical performance of torrefaction processes is expected to improve and energy efficiencies are expected to be at least 97% as optimal torgas use and efficient heat transfer are realised. Short term production costs for woody biomass TOPs (torrefied pellets) are estimated to be between 3.3 and 4.8 US$/GJ LHV , falling to 2.1–5.1 US$/GJ LHV in the long term. At such cost levels, torrefied pellets would become competitive with traditional pellets. For full commercialisation, torrefaction reactors still require to be optimised. Of importance to torrefaction system performance is the achievement of consistent and homogeneous, fully hydrophobic and stable product, capable of utilising different feedstocks, at desired end-use energy densities. - Highlights: • Woody biomass torrefaction thermal efficiency is 94% and mass efficiency is 48% on a daf basis. • Straw theoretical torrefaction energetic efficiency is 96% and mass efficiency is 65%. • Current woody TOPs production costs are between 3.3 and 4.8 US$/GJ LHV , 50

  7. Clinical proteomics: Current status, challenges, and future perspectives

    Directory of Open Access Journals (Sweden)

    Shyh-Horng Chiou

    2011-01-01

    Full Text Available This account will give an overview and evaluation of the current advances in mass spectrometry (MS-based proteomics platforms and technology. A general review of some background information concerning the application of these methods in the characterization of molecular sizes and related protein expression profiles associated with different types of cells under varied experimental conditions will be presented. It is intended to provide a concise and succinct overview to those clinical researchers first exposed to this foremost powerful methodology in modern life sciences of postgenomic era. Proteomic characterization using highly sophisticated and expensive instrumentation of MS has been used to characterize biological samples of complex protein mixtures with vastly different protein structure and composition. These systems are then used to highlight the versatility and potential of the MS-based proteomic strategies for facilitating protein expression analysis of various disease-related organisms or tissues of interest. Major MS-based strategies reviewed herein include (1 matrix-assisted laser desorption ionization-MS and electron-spray ionization proteomics; (2 one-dimensional or two-dimensional gel-based proteomics; (3 gel-free shotgun proteomics in conjunction with liquid chromatography/tandem MS; (4 Multiple reaction monitoring coupled tandem MS quantitative proteomics and; (5 Phosphoproteomics based on immobilized metal affinity chromatography and liquid chromatography-MS/MS.

  8. Laccase applications in biofuels production: current status and future prospects.

    Science.gov (United States)

    Kudanga, Tukayi; Le Roes-Hill, Marilize

    2014-08-01

    The desire to reduce dependence on the ever diminishing fossil fuel reserves coupled with the impetus towards green energy has seen increased research in biofuels as alternative sources of energy. Lignocellulose materials are one of the most promising feedstocks for advanced biofuels production. However, their utilisation is dependent on the efficient hydrolysis of polysaccharides, which in part is dependent on cost-effective and benign pretreatment of biomass to remove or modify lignin and release or expose sugars to hydrolytic enzymes. Laccase is one of the enzymes that are being investigated not only for potential use as pretreatment agents in biofuel production, mainly as a delignifying enzyme, but also as a biotechnological tool for removal of inhibitors (mainly phenolic) of subsequent enzymatic processes. The current review discusses the major advances in the application of laccase as a potential pretreatment strategy, the underlying principles as well as directions for future research in the search for better enzyme-based technologies for biofuel production. Future perspectives could include synergy between enzymes that may be required for optimal results and the adoption of the biorefinery concept in line with the move towards the global implementation of the bioeconomy strategy.

  9. In vivo small animal imaging: Current status and future prospects

    International Nuclear Information System (INIS)

    Kagadis, George C.; Loudos, George; Katsanos, Konstantinos; Langer, Steve G.; Nikiforidis, George C.

    2010-01-01

    The use of small animal models in basic and preclinical sciences constitutes an integral part of testing new pharmaceutical agents prior to commercial translation to clinical practice. Whole-body small animal imaging is a particularly elegant and cost-effective experimental platform for the timely validation and commercialization of novel agents from the bench to the bedside. Biomedical imaging is now listed along with genomics, proteomics, and metabolomics as an integral part of biological and medical sciences. Miniaturized versions of clinical diagnostic modalities, including but not limited to microcomputed tomography, micromagnetic resonance tomography, microsingle-photon-emission tomography, micropositron-emission tomography, optical imaging, digital angiography, and ultrasound, have all greatly improved our investigative abilities to longitudinally study various experimental models of human disease in mice and rodents. After an exhaustive literature search, the authors present a concise and critical review of in vivo small animal imaging, focusing on currently available modalities as well as emerging imaging technologies on one side and molecularly targeted contrast agents on the other. Aforementioned scientific topics are analyzed in the context of cancer angiogenesis and innovative antiangiogenic strategies under-the-way to the clinic. Proposed hybrid approaches for diagnosis and targeted site-specific therapy are highlighted to offer an intriguing glimpse of the future.

  10. Current status of knowledge on public-speaking anxiety.

    Science.gov (United States)

    Pull, Charles B

    2012-01-01

    This review examines the current knowledge on public-speaking anxiety, that is, the fear of speaking in front of others. This article summarizes the findings from previous review articles and describes new research findings on basic science aspects, prevalence rates, classification, and treatment that have been published between August 2008 and August 2011. Recent findings highlight the major aspects of psychological and physiological reactivity to public speaking in individuals who are afraid to speak in front of others, confirm high prevalence rates of the disorder, contribute to identifying the disorder as a possibly distinct subtype of social anxiety disorder (SAD), and give support to the efficacy of treatment programs using virtual reality exposure and Internet-based self-help. Public-speaking anxiety is a highly prevalent disorder, leading to excessive psychological and physiological reactivity. It is present in a majority of individuals with SAD and there is substantial evidence that it may be a distinct subtype of SAD. It is amenable to treatment including, in particular, new technologies such as exposure to virtual environments and the use of cognitive-behavioral self-help programs delivered on the Internet.

  11. Nanotechnology in neurology: Genesis, current status, and future prospects

    Directory of Open Access Journals (Sweden)

    Paurush Ambesh

    2015-01-01

    Full Text Available Nanotechnology is a promising, novel field of technological development. There is great potential in research and clinical applications for neurological diseases. Here we chronicle the inception of nanotechnology, discuss its integration with neurology, and highlight the challenges in current application. Some of the problems involving practical use of neuronanotechnology are direct biological toxicity, visualization of the nanodevice, and the short life expectancy of nanomachinery. Neuron cell therapy is an upcoming field for the treatment of challenging problems in neurology. Peptide nanofibers based on amphiphilic molecules have been developed that can autoregulate their structure depending on the conditions of the surrounding milieu. Such frameworks are promising for serving as drug delivery systems or communication bridges between damaged neurons. For common disabling diseases such as Alzheimer′s disease (AD, Parkinson′s disease (PD, amyotrophic lateral sclerosis (ALS, and multiple sclerosis (MS, recent developments have seen revolutionary nanotech-based novelties, which are discussed here in detail. Bioimaging integrated with nanoneuromedicine has opened up new doors for cancer and infection therapeutics.

  12. Molecular ultrasound imaging: current status and future directions

    International Nuclear Information System (INIS)

    Deshpande, N.; Needles, A.; Willmann, J.K.

    2010-01-01

    Targeted contrast-enhanced ultrasound (molecular ultrasound) is an emerging imaging strategy that combines ultrasound technology with novel molecularly-targeted ultrasound contrast agents for assessing biological processes at the molecular level. Molecular ultrasound contrast agents are nano- or micro-sized particles that are targeted to specific molecular markers by adding high-affinity binding ligands onto the surface of the particles. Following intravenous administration, these targeted ultrasound contrast agents accumulate at tissue sites overexpressing specific molecular markers, thereby enhancing the ultrasound imaging signal. High spatial and temporal resolution, real-time imaging, non-invasiveness, relatively low costs, lack of ionising irradiation and wide availability of ultrasound systems are advantages compared to other molecular imaging modalities. In this article we review current concepts and future directions of molecular ultrasound imaging, including different classes of molecular ultrasound contrast agents, ongoing technical developments of pre-clinical and clinical ultrasound systems, the potential of molecular ultrasound for imaging different diseases at the molecular level, and the translation of molecular ultrasound into the clinic.

  13. Current status and future of high energy physics

    Energy Technology Data Exchange (ETDEWEB)

    Tu, T.

    1977-03-01

    With respect to the present knowledge of the internal structure of matter, nothing is known about the structure of leptons or photons, and just a little about the structure of hadrons. Some of the most important questions to be answered in high-energy physics are the following: how many kinds of quarks are there and how can they be isolated; how are quarks bound to form hadrons; can weak, electromagnetic, and strong interactions all be described by a single unified theory; are there new types of leptons; and are there new phenomena not conceived of yet. New particles may be discovered by large accelerators scheduled for completion in West Germany, the United States, and the Soviet Union about 1980. The factors vital to China's long-range development of high-energy physics are personnel well-versed in Marxism--Leninism and Mao Tse-tung's thought, particle accelerators with high energies, strong currents, and many kinds of particle beams, and an advanced particle detection and data processing technology.

  14. BANK DEPOSIT CONTRACT: CURRENT STATUS OF LEGISLATION AND LAW ENFORCEMENT

    Directory of Open Access Journals (Sweden)

    Oleg Kozhevnikov

    2017-01-01

    Full Text Available УДК 347.734The relevance of the study is determined by the debates around legal rules devoted to the bank deposit contract, as well as an extensive judicial practice, revealing the problems of existing legislation. Purpose: to systematize the main problems of enforcement related to the bank deposit contract and to suggest ways of improving the current legislation. Meth-ods: general and special scientific methods (systemic, comparative, formal-logical and other are used. Results: on the basis of the comparative experience of Belarus, Kazakhstan and other foreign countries, analysis of judicial practice proposals to improve existing legislation are presented (including types of contract, investigation of deposits, bail-in.The authors conclude, it is necessary to supplement Chapter 44 of Russian Civil Code by rules on types of bank deposit agreement, establish the order of registration of the deposit and deposited funds with the remote technology, by list of requirements as to the form of deposit and savings certificates, by details and peculiarities of treatment, as well as consolidate the definition of "interest capitalization" and establish the list of cases of restriction of the rights of depositors for disposal of deposits. Procedural rules on the investigation of the deposits, determining the jurisdiction of cases on the protection of investors, are also should be improved.

  15. Status of series production and test of the HTS current leads for Wendelstein 7-X

    Energy Technology Data Exchange (ETDEWEB)

    Heller, Reinhard, E-mail: reinhard.heller@kit.edu [Karlsruhe Institute of Technology, Karlsruhe (Germany); Buscher, Klaus-Peter [Max-Planck-Institut für Plasmaphysik, Teilinstitut Greifswald, Greifswald (Germany); Drotziger, Sandra; Fietz, Walter H.; Kienzler, Andreas; Lietzow, Ralph [Karlsruhe Institute of Technology, Karlsruhe (Germany); Mönnich, Thomas [Max-Planck-Institut für Plasmaphysik, Teilinstitut Greifswald, Greifswald (Germany); Richter, Thomas [Karlsruhe Institute of Technology, Karlsruhe (Germany); Rummel, Thomas [Max-Planck-Institut für Plasmaphysik, Teilinstitut Greifswald, Greifswald (Germany); Urbach, Elisabeth [Karlsruhe Institute of Technology, Karlsruhe (Germany)

    2013-10-15

    Highlights: ► KIT is responsible for design, production and test of the HTS current leads for W7-X. In total 14 current leads with a max. current of 18.2 kA are required. ► Final acceptance test of the current leads performed at KIT using a test cryostat connected to the main vacuum vessel of the TOSKA facility. ► In general the performance of the leads is excellent and reproducible. ► Problems during series production and test related to electrical insulation, leak tightness, contact resistance between current lead and bus bar joint box. -- Abstract: The Karlsruhe Institute of Technology (KIT) is responsible for design, production and test of the High Temperature Superconductor (HTS) current leads for the stellarator Wendelstein 7-X (W7-X). In total 14 current leads with a maximum current of 18.2 kA are required. Special feature is the upside-down orientation of the current leads because of the location of the power supplies in the basement of the experimental area of W7-X. One further important requirement is the Paschen tight electrical insulation of current leads and the connection to the bus bar system. Due to some very specific manufacturing steps, budget and time restrictions, it has been mutually decided between the project partners to manufacture most of the components in house, except the HTS stacks which have been produced and delivered by industry. As the semi-finished parts were manufactured in the central workshop of KIT, the assembly of the current leads was performed in the ITEP (Institute for Technical Physics). The final acceptance test of the current leads is performed at KIT, using a dedicated test cryostat assembled beside and connected to the main vacuum vessel of the TOSKA facility. The paper describes the status of the manufacturing of the current leads. In addition attention is given to specific problems that occurred during the manufacturing and testing.

  16. [Multiple Myeloma - Current Status in Diagnostic Testing and Therapy].

    Science.gov (United States)

    Kehrer, Michael; Koob, Sebastian; Strauss, Andreas; Wirtz, Dieter Christian; Schmolders, Jan

    2017-10-01

    Background Multiple myeloma is a haematological blood cancer of the bone marrow and is classified by the World Health Organisation (WHO) as a plasma cell neoplasm. In multiple myeloma, normal plasma cells transform into malignant myeloma cells and produce large quantities of an abnormal immunoglobulin called monoclonal protein or M protein. This ultimately causes multiple myeloma symptoms such as bone damage or kidney problems. The annual worldwide incidence of multiple myeloma is estimated to be 6 - 7/100,000 and accounts for 1% of all cancer. In Germany, there are about 6,000 cases of newly diagnosed multiple myeloma per annum. In the current era of new agents, such as immunomodulatory drugs and proteasome inhibitors and antibodies, enormous progress has been achieved in the therapy of multiple myeloma. In orthopaedics, it is essential to be able to recognise the of alarming symptoms of multiple myeloma in clinical routine and to be aware of basic diagnostic features to confirm this disease. Surgical treatment of myeloma-related bone lesions - such as stabilisation of pathological fractures - is an important domain of tumour orthopaedic surgery. Methods A comprehensive literature search was performed in PubMed using the keywords "multiple myeloma" and "diagnostic" or "therapy". This served to evaluate the available primary and secondary literature on the current status of the diagnostic testing and therapy of multiple myeloma. Systematic reviews, meta-analyses and clinical studies as well as international recommendations in therapy were included until the spring of 2016. Results There are now very sensitive screening methods for the diagnosis of multiple myeloma. Accurate diagnosis is generally based on several factors, including physical evaluation, patient history, symptoms, and diagnostic testing results. The standards for initial diagnostic tests are determined by blood and urine tests as well as a bone marrow biopsy and skeletal imaging, such as X

  17. Assessment of the current status of basic nuclear data compilations

    International Nuclear Information System (INIS)

    1985-01-01

    Topics discussed include: the status of mass-chain evaluations, remote terminal access, other US Nuclear Data Network publications, formats and procedures subcommittee report, keyword follow-up (Phys. Rev. C), and atomic data and nuclear data tables

  18. Review of mercury pollution in South Africa: current status

    CSIR Research Space (South Africa)

    Walters, Chavon R

    2011-08-01

    Full Text Available The present paper is a review on the status of mercury (Hg) as a pollutant in South African aquatic ecosystems. Spatial patterns of Hg distribution and bioaccumulation in water resources were investigated by collecting and analyzing multimedia...

  19. In vivo microrobots for natural orifice transluminal surgery. Current status and future perspectives.

    Science.gov (United States)

    Forgione, A

    2009-06-01

    The possibility to operate inside the peritoneal cavity through small holes performed in hollow organs that is presented by Natural Orifice Transluminal Endoscopic Surgery (NOTES) represents a major paradigm shift in general surgery. While this new approach seems very appealing from patients' perspectives because it eliminates completely abdominal wall aggression and promises to reduce postoperative pain, it is very challenging for surgeons because of the major constraints imposed by both the mode of access and the limited technology currently available. For this reason NOTES applications at the present time are performed by only a few surgeons and mainly to perform non-complex procedures. While new devices are under development, many of them are trying mainly to simply improve current endoscopic platforms and seem not to offer breakthrough solutions. The numerous challenges introduced by natural orifice approaches require a radical shift in the conception of new technologies in order to make this emerging operative access safe and reproducible. The convergence of several enabling technologies in the field of miniaturization, communication and micro-mechatronics brings the possibility to realize on a large scale the revolutionary concept of miniature in vivo co-operative robots. These robots provide vision and task assistance without the constraints of the entry incision and have been shown in experimental settings to possess many qualities that could be ideal to partner with Natural Orifice Surgery. This article explores the current status of microrobotics as well as presents potential future scenarios of their applications in NOTES.

  20. Hypothermic organ preservation by static storage methods: Current status and a view to the future.

    Science.gov (United States)

    McAnulty, Jonathan F

    2010-07-01

    The donor organ shortage is the largest problem in transplantation today and is one where organ preservation technology has an important role to play. Static storage of solid organs, especially of the kidney, continues to be the most common method employed for storage and transport of organs from deceased donors. However, the increase in organs obtained from expanded criteria donors and donors with cardiac death provide new challenges in crafting effective preservation methods for the future. This article reviews the current status of static hypothermic storage methods and discusses potential avenues for future exploitation of this technology as the available organ pool is expanded into the more marginal donor categories. Copyright 2009 Elsevier Inc. All rights reserved.

  1. Measuring Earth: Current status of the GRACE Follow-On Laser Ranging Interferometer

    Science.gov (United States)

    Schütze, Daniel; LRI Team

    2016-05-01

    The GRACE mission that was launched in 2002 has impressively proven the feasibility of low-orbit satellite-to-satellite tracking for Earth gravity observations. Especially mass transport related to Earth's hydrological system could be well resolved both spatially and temporally. This allows to study processes such as polar ice sheet decline and ground water depletion in great detail. Owing to GRACE's success, NASA and GFZ will launch the successor mission GRACE Follow-On in 2017. In addition to the microwave ranging system, GRACE Follow-On will be the first mission to use a Laser Ranging Interferometer as technology demonstrator to track intersatellite distance changes with unprecedented precision. This new ranging device inherits some of the technologies which have been developed for the future spaceborne gravitational wave detector LISA. I will present the architecture of the Laser Ranging Interferometer, point out similarities and differences to LISA, and conclude with the current status of the flight hardware production.

  2. Current status and future prospect of electron beam sterilization in Japan

    International Nuclear Information System (INIS)

    Katsura, Ichiro

    1998-01-01

    It seems that electron beam sterilization is being current topic among all applications in Japan and that this tendency will continue until when major companies interested in the technology complete introducing electron beam. Since the Ministry of Health and Welfare(MOHW) officially issued revised regulation on GMP for medical devices in 1995, EtO has become the method regarded as time and money consuming one. On the contrary, electron beam has become as relatively economical and desirable method to achieve same result by its characteristics such as high productivity, rather easy validation and consequent cost reduction, although less penetration limit the kind of products to be treated. Status and prospect of electron beam sterilization in Japan will be presented in the paper along with accelerator related technologies

  3. Current Status and Future Directions of Targeted Peptide Radionuclide Therapy

    International Nuclear Information System (INIS)

    Valkema, R.

    2009-01-01

    Current status: Peptide receptor radionuclide therapy (PRRT) is currently almost exclusively targeted at the somatostatin receptor (sst). Of the 5 receptor subtypes, sst2 is frequently very highly expressed at the cell surface of neuroendocrine tumors (NET). Octreotide is a small and stable derivative of native somatostatin, which can be very well labeled with therapeutic radionuclides such as the beta-emitters ''9''0Y, ''1''7''7Lu or the Auger emitter ''1''1''1In, chelated in DTPA or DOTA, linked to the peptide. All current therapeutic octreotide derivatives are agonists that are internalized in the cell. The affinity for the sst2 receptor is better for [DOTA,Tyr''3]octreotate than for [DOTA,Tyr''3]octreotide or [DTPA]octreotide. ''9''0Y is a pure beta-emitter, with a half-life of 2.7 days, a high energy of 2.270 MeV, and a maximum penetration in tissue of 12mm. ''1''7''7Lu with a half-life of 6.7 days emits a low abundance of gamma photons as well as beta particles of 497 keV, with a maximum tissue penetration of 2 mm. ''1''7''7Lu-[DOTA,Tyr''3]octreotate (Lu-DOTATE), ''9''0Y-[DOTA,Tyr''3]octreotate (Y-DOTATATE) and ''9''0Y-[DOTA,Tyr''3]octreotide (Y-DOTATOC) are today the most frequently used therapeutic radiopeptides. Main inclusion criteria: inoperable and/or metastatic NET, receptor-positivity in all known lesions demonstrated by sufficient uptake on ''1''1''1In-octreotide scintigraphy (intensity > liver parenchyma), life expectancy at least 3-6 months, sufficient bone marrow reserve (hemoglobin (HGB) ≥ 5 mmol/L, white blood cells (WBC) ≥ 2*10 9 /L, platelets (PLT) ≥ 75*10 12 /L), sufficient renal function (serum creatinine 40 mL/min), sufficient hepatic and cardiac reserve. Karnofski score ≥50. Efficacy: several groups have reported objective response rates (RECIST or WHO/SWOG; CT or MRI based). Complete remission (CR) is rarely seen, partial remission (PR; >50% shrinkage SWOG) in 7% - 37%, minor remission (MR, 25% - 50% shrinkage) in 13% - 17

  4. Current status of the New Antiepileptic drugs in chronic pain.

    Directory of Open Access Journals (Sweden)

    Harpreet Singh Sidhu

    2016-08-01

    Full Text Available Antiepileptic drugs (AEDs are extensively used worldwide to treat a wide range of disorders other than epilepsy, such as neuropathic pain, migraine and bipolar disorder. Due to this situation more than 20 new third-generation AEDs have been introduced in the market recently. The future design of new AEDs must also have potential to help in the non-epileptic disorders. The wide acceptance of second generation AEDs for the management of various Non-epileptic disorders has caused the emergence of generics in the market. The wide use of approved AEDs outside epilepsy is based on both economic and scientific reasons. Bipolar disorders, migraine prophylaxis, fibromyalgia and neuropathic pain represent the most attractive indication expansion opportunities for anticonvulsant developers, providing blockbuster revenues. Strong growth in non-epilepsy conditions will see Pfizer’s Lyrica become the market leading brand by 2018. In this review we mainly focus on the current status of new AEDs in the treatment of chronic pain and migraine prophylaxis. AEDs have a strong analgesic potential and this is demonstrated by the wide use of carbamazepine in trigeminal neuralgia and sodium valproate in migraine prophylaxis. At present, data on the new AEDs for non-epileptic conditions are inconclusive. Not all AEDs are effective in the management of neuropathic pain and migraine. Only those AEDs whose mechanisms of action are match with pathophysiology of the disease, have potential to show efficacy in non-epileptic disorder. For this better understanding of the pathophysiology of the disease and mechanisms of action of new AEDs are essential requirement before initiating pre-clinical and clinical trials. Many new AEDs show good results in the animal model and open-label studies but fail to provide strong evidence at randomized, placebo-controlled trials. The final decision regarding the clinical efficacy of the particular AEDs in a specific non-epileptic disorder

  5. Current status of organ transplant in Islamic countries.

    Science.gov (United States)

    Ghods, Ahad J

    2015-04-01

    The Organization of Islamic Cooperation consists of 57 member states whose people are mainly followers of the Islamic religion. During the past several decades, organ transplants have been increasingly used for the treatment of end-stage organ failures worldwide. This study is to investigate the current status of organ transplant in Islamic countries. For data collection a literature, review was carried out. Information from international registries was used and key persons from some countries were contacted. In all 5 Islamic countries of North Africa, living-donor kidney transplant was performed. Tunisia was the only country with deceased-donor organ transplant in North Africa. In 22 Islamic countries of sub-Saharan Africa, living-donor kidney transplant was performed only in Sudan and Nigeria. Deceased-donor organ transplant was illegal and nonexistent in this region. In all 14 Islamic countries of the Middle East, living-donor kidney transplant was an established practice. Turkey, Iran, and Saudi Arabia had the highest rates of organ transplant activity. In 2013, Turkey performed the highest rate of living-donor kidney and liver transplants, and Iran performed the highest rate of deceased-donor kidney and liver transplants. For 7 Islamic countries of Central Asia, organ transplant was nonexistent in Afghanistan and Turkmenistan; in the other 5 countries, a limited number of living-donor kidney or liver transplants were performed. In all 6 countries located in South and Southeast Asia, living-donor kidney transplant was performed. Only Malaysia had a limited-scale deceased-donor transplant program. Albania in the Balkans, and 2 countries (Suriname and Guyana) in South America, were also member states of the Organization of Islamic Cooperation; in these countries, only few living-donor kidney transplants were performed. The organ transplant rates, especially for deceased-donor transplant, in most Islamic countries were less than expected. Some of the causes of low

  6. Current mechanisms in silicon PIN structures processed with various technologies

    CERN Document Server

    Ruzin, A

    2002-01-01

    This study presents a comparison of dark characteristics of PIN (p sup + -semi-intrinsic-n sup +) structures fabricated with several technologies on high-resistivity silicon wafers. The study considers the temperature dependence of the various current mechanisms. Significant and consistent differences were observed in the reverse current-voltage characteristics of the various samples, while capacitance-voltage profiles remain similar, indicating no process related variations in the effective space charge distribution. The results show that the activation energy of the reverse current in samples processed by various technologies differs, which may indicate that the Shockley Read Hall generation occurs through centers at different energies. Specifically, in some samples the reverse currents are dominated by generation-recombination centers located approx 0.2 eV from the mid-gap, while in other samples the currents are dominated by the 'standard' mid-gap generation-recombination centers. The difference is shown ...

  7. Current Status and Recent Developments in Biopesticide Use

    Directory of Open Access Journals (Sweden)

    Christos A. Damalas

    2018-01-01

    Full Text Available Biopesticides have attracted attention in pest management in recent decades, and have long been promoted as prospective alternatives to synthetic pesticides. Biopesticides have also attracted great interest in the international research community, with a significant increase in the number of publications devoted to the subject. Recently, new substances, like strains of the fungus Talaromyces flavus SAY-Y-94-01, extracts of the plant Clitoria ternatea (butterfly pea, products of the fungus Trichoderma harzianum, products of the bacterium Bacillus thuringiensis var. tenebrionis strain Xd3 (Btt-Xd3, the alkaloid compound oxymatrine, fermentation products of the bacterium Lactobacillus casei strain LPT-111, stilbenes accumulated in grape canes, and olive mill wastes, have been reported in the literature as promising compounds for use as biopesticides, but more field research is required to assess the effects on specific pest problems under diverse cropping systems. Nevertheless, biopesticides have not yet reached the desired level of use, whereby they could displace the dominance of chemical pesticides, given that the commercialization of new products in the market is lagging behind. Currently, biopesticides comprise a small share of the total crop protection market globally, with a value of about $3 billion worldwide, accounting for just 5% of the total crop protection market. Fewer biopesticide-active substances are registered in the European Union (EU than in the United States, India, Brazil, or China, due to long and complex registration processes in the EU, which follow the model for the registration of conventional pesticides. Nanoformulations and microencapsulation technologies can improve the stability and residual action of biopesticide products, and this could increase their field use. Regulations that promote registration of low-risk compounds with the provision of incentives could also facilitate commercialization and availability of

  8. MELiSSA Food Characterization general approach and current status

    Science.gov (United States)

    Weihreter, Martin; Chaerle, Laury; Secco, Benjamin; Molders, Katrien; van der Straeten, Dominique; Duliere, Eric; Pieters, Serge; Maclean, Heather; Dochain, Denis; Quinet, Muriel; Lutts, Stanley; Graham, Thomas; Stasiak, Michael; Rondeau Vuk, Theresa; Zheng, Youbin; Dixon, Mike; Laniau, Martine; Larreture, Alain; Timsit, Michel; Aronne, Giovanna; Barbieri, Giancarlo; Buonomo, Roberta; Veronica; Paradiso, Roberta; de Pascale, Stafania; Galbiati, Massimo; Troia, A. R.; Nobili, Matteo; Bucchieri, Lorenzo; Page, Valérie; Feller, Urs; Lasseur, Christophe

    . Available MELiSSA closed environment crop growth data were used to develop a first photosynthetic model representing the basic carbon fixation mechanisms. This model will be further elaborated in the course of this study to predict yield, oxygen production and transpi-ration. As an ultimate goal the model is intended to simulate the composition of the different plant organs (root, shoot, fruit/seed or tuber) for each crop under various conditions. For the validation of this model an extensive amount of data sets are needed. Current plant growth bench test setups will provide part of the required data. To gain more precise and detailed datasets, a highly closed plant growth chamber (Plant Characterization Unit, PCU) is under development. The PCU will provide accurate mass balances for carbon, water, oxygen and other elements with statistical reliability. This reliability is achieved through a high degree of closure and environment homogeneity. The PCU will also provide data for the above described plant characterization studies. The general work approach, the current status and future steps will be illustrated.

  9. Lower hybrid current drive for edge current density modification in DIII-D: Final status report

    Energy Technology Data Exchange (ETDEWEB)

    Fenstermacher, M.E. [Lawrence Livermore National Lab., CA (United States); Porkolab, M. [Massachusetts Inst. of Tech., Cambridge, MA (United States). Plasma Fusion Center

    1993-08-04

    Application of Lower Hybrid (LH) Current Drive (CD) in the DIII-D tokamak has been studied at LLNL, off and on, for several years. The latest effort began in February 1992 in response to a letter from ASDEX indicating that the 2.45 GHz, 3 MW system there was available to be used on another device. An initial assessment of the possible uses for such a system on DIII-D was made and documented in September 1992. Multiple meetings with GA personnel and members of the LH community nationwide have occurred since that time. The work continued through the submission of the 1995 Field Work Proposals in March 1993 and was then put on hold due to budget limitations. The purpose of this document is to record the status of the work in such a way that it could fairly easily be restarted at a future date. This document will take the form of a collection of Appendices giving both background and the latest results from the FY 1993 work, connected by brief descriptive text. Section 2 will describe the final workshop on LHCD in DIII-D held at GA in February 1993. This was an open meeting with attendees from GA, LLNL, MIT and PPPL. Summary documents from the meeting and subsequent papers describing the results will be included in Appendices. Section 3 will describe the status of work on the use of low frequency (2.45 GHZ) LH power and Parametric Decay Instabilities (PDI) for the special case of high dielectric in the edge regions of the DIII-D plasma. This was one of the critical issues identified at the workshop. Other potential issues for LHCD in the DIII-D scenarios are: (1) damping of the waves on fast ions from neutral beam injection, (2) runaway electrons in the low density edge plasma, (3) the validity of the WKB approximation used in the ray-tracing models in the steep edge density gradients.

  10. Weight status and body image perceptions in adolescents: current perspectives.

    Science.gov (United States)

    Voelker, Dana K; Reel, Justine J; Greenleaf, Christy

    2015-01-01

    Adolescence represents a pivotal stage in the development of positive or negative body image. Many influences exist during the teen years including transitions (eg, puberty) that affect one's body shape, weight status, and appearance. Weight status exists along a spectrum between being obese (ie, where one's body weight is in the 95th percentile for age and gender) to being underweight. Salient influences on body image include the media, which can target adolescents, and peers who help shape beliefs about the perceived body ideal. Internalization of and pressures to conform to these socially prescribed body ideals help to explain associations between weight status and body image. The concepts of fat talk and weight-related bullying during adolescence greatly contribute to an overemphasis on body weight and appearance as well as the development of negative body perceptions and dissatisfaction surrounding specific body parts. This article provides an overview of the significance of adolescent development in shaping body image, the relationship between body image and adolescent weight status, and the consequences of having a negative body image during adolescence (ie, disordered eating, eating disorders, and dysfunctional exercise). Practical implications for promoting a healthy weight status and positive body image among adolescents will be discussed.

  11. Weight status and body image perceptions in adolescents: current perspectives

    Science.gov (United States)

    Voelker, Dana K; Reel, Justine J; Greenleaf, Christy

    2015-01-01

    Adolescence represents a pivotal stage in the development of positive or negative body image. Many influences exist during the teen years including transitions (eg, puberty) that affect one’s body shape, weight status, and appearance. Weight status exists along a spectrum between being obese (ie, where one’s body weight is in the 95th percentile for age and gender) to being underweight. Salient influences on body image include the media, which can target adolescents, and peers who help shape beliefs about the perceived body ideal. Internalization of and pressures to conform to these socially prescribed body ideals help to explain associations between weight status and body image. The concepts of fat talk and weight-related bullying during adolescence greatly contribute to an overemphasis on body weight and appearance as well as the development of negative body perceptions and dissatisfaction surrounding specific body parts. This article provides an overview of the significance of adolescent development in shaping body image, the relationship between body image and adolescent weight status, and the consequences of having a negative body image during adolescence (ie, disordered eating, eating disorders, and dysfunctional exercise). Practical implications for promoting a healthy weight status and positive body image among adolescents will be discussed. PMID:26347007

  12. Current status of discrete data capture in synoptic surgical pathology and cancer reporting

    Directory of Open Access Journals (Sweden)

    Williams CL

    2015-06-01

    Full Text Available Christopher L Williams,1 Roger Bjugn,2 Lewis A Hassell1 1Department of Pathology, University of Oklahoma Health Sciences Center, Oklahoma City, OK, USA; 2Department of Pathology, Oslo University Hospital, Oslo, Norway Abstract: The current status of synoptic pathology reporting is presented with its historical context. The awareness of additional audiences and users has made the presentation and capture of pathology data, particularly cancer data of broad importance. Current models of adoption in the US, Canada, Norway, and the Netherlands are noted. Significant terms, benefits, and stakeholders key to implementation and advancement of capabilities particularly with regard to capture of discrete data elements are presented. Important barriers to be overcome include fiscal constraints, technologic barriers such as interconnectivity and legacy systems, as well as social and organizational obstacles. Keywords: quality assurance, integrated disease reporting, clarity, completeness, pathology report, cancer registry, biorepository

  13. Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting

    Directory of Open Access Journals (Sweden)

    Amit Panwar

    2016-05-01

    Full Text Available Recent developments in 3D printing technologies and design have been nothing short of spectacular. Parallel to this, development of bioinks has also emerged as an active research area with almost unlimited possibilities. Many bioinks have been developed for various cells types, but bioinks currently used for 3D printing still have challenges and limitations. Bioink development is significant due to two major objectives. The first objective is to provide growth- and function-supportive bioinks to the cells for their proper organization and eventual function and the second objective is to minimize the effect of printing on cell viability, without compromising the resolution shape and stability of the construct. Here, we will address the current status and challenges of bioinks for 3D printing of tissue constructs for in vitro and in vivo applications.

  14. Current Technology Trends for School Library Media Specialists

    Directory of Open Access Journals (Sweden)

    Leticia Ekhaml

    2003-03-01

    Full Text Available An overview of some of the current technology trends used in classroom instruction and school library media centers in provided in this article such as the use of handheld electronic organizers, CD recorders, digital video cameras, and interactive whiteboards. The article offers some suggestions or ideas on how to acquire new technologies to school library media centers that are low in budgetary funds.

  15. Current Status, Opportunities and Challenges of Augmented Reality in Education

    Science.gov (United States)

    Wu, Hsin-Kai; Lee, Silvia Wen-Yu; Chang, Hsin-Yi; Liang, Jyh-Chong

    2013-01-01

    Although augmented reality (AR) has gained much research attention in recent years, the term AR was given different meanings by varying researchers. In this article, we first provide an overview of definitions, taxonomies, and technologies of AR. We argue that viewing AR as a concept rather than a type of technology would be more productive for…

  16. Technological adjuncts to enhance current psychotherapy practices: a review.

    Science.gov (United States)

    Clough, Bonnie A; Casey, Leanne M

    2011-04-01

    Although there are several of reviews of technology in psychology, none to date has focused on technological adjuncts for improving traditional face to face therapy. However, examination of response, adherence, and dropout rates suggests there is considerable scope for improving traditional face to face services. The purpose of this paper was to examine technological adjuncts used to enhance psychotherapy practice. This review focused only on those technologies designed to supplement or enhance traditional therapy methods. Adjuncts designed to reduce direct therapist contact or change the medium of communication were not included. Adjuncts reviewed were mobile phones, personal digital assistants, biofeedback and virtual reality. Limitations in the current literature and directions for future research were identified and discussed. This review provides a comprehensive examination of the way in which adjunctive technologies may be incorporated into face to face therapy. Copyright © 2011 Elsevier Ltd. All rights reserved.

  17. New Pulsed Power Technology for High Current Accelerators

    International Nuclear Information System (INIS)

    Caporaso, G J

    2002-01-01

    Recent advances in solid-state modulators now permit the design of a new class of high current accelerators. These new accelerators will be able to operate in burst mode at frequencies of several MHz with unprecedented flexibility and precision in pulse format. These new modulators can drive accelerators to high average powers that far exceed those of any other technology and can be used to enable precision beam manipulations. New insulator technology combined with novel pulse forming lines and switching may enable the construction of a new type of high gradient, high current accelerator. Recent developments in these areas will be reviewed

  18. [Current status of extracorporeal shock wave lithotripsy in urinary lithiasis.

    Science.gov (United States)

    Pereira-Arias, Jose Gregorio; Gamarra-Quintanilla, Mikel; Urdaneta-Salegui, Luis Felipe; Mora-Christian, Jorge Alberto; Sánchez-Vazquez, Andrea; Astobieta-Odriozola, Ander; Ibarluzea-González, Gaspar

    2017-03-01

    Over the last decade, urinary lithiasis' prevalence has dramatically increased due to diet and lifestyle changes, growing 10.6% and 7.1% in men and women respectively. Extracorporeal shock wave lithotripsy has lost relevance in current practice due to endoscopic device development and unpredictability of results. Instrument miniaturization is leading to an increase of the percutaneous approach of increasingly smaller stones, while most flexible ureteroscopes durability and digitalization has allowed urologists to address larger stones. So that, decision algorithm is now impossible to define, but what is clear is that ESWL has declined worldwide. Can it disappear as a urinary lithiasis treatment modality? If we don't improve appropriate candidate selection and optimize disintegration efficiency, guidelines are going to replace the more "boring" ESWL by popular and more attractive endoscopes. Shock wave technology has evolved in the last two decades, however lithotripsy fundamental principle has not changed. ESWL has passed the test of time and centers dedicated to stone treatment should have a lithotripter in order to offer an appropriate balance in different options for different clinical situations. New developments will be focused on improvements in location (in-line navigation systems; Vision track system) and automatic ultrasound location on a robotic arm; monitoring and stone fixation, implementation of different focal sizes with new acoustic lenses, multitask working stations that allow endourological approach, coupling control (avoiding microbubbles) and low cost devices for different applications. On the other hand, optimizing outcomes by: slower pulse rates, ramping strategies and patient selection with soft stones, short stone-skin distance, low BMI and favorable collecting system anatomy, allow us to achieve better outcomes in shock wave treatments. SWL still represents a unique non invasive method of stone disease treatment with no anesthesia and low

  19. Current status of the EPR method to detect irradiated food

    International Nuclear Information System (INIS)

    Desrosiers, M.F.

    1996-01-01

    This review gives a brief outline of the principles of the EPR detection method for irradiated foods by food type. For each food type, the scope, limitations and status of the method are given. The extensive reference list aims to include all which define the method, as well as some rarely cited works of historical importance. (author)

  20. ACRF Instrumentation Status: New, Current, and Future January 2007

    Energy Technology Data Exchange (ETDEWEB)

    Liljegren, JC

    2007-01-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

  1. ACRF Instrumentation Status: New, Current, and Future June 2007

    Energy Technology Data Exchange (ETDEWEB)

    JC Liljegren

    2007-06-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

  2. Current status of Russian Evaluated Neutron Data Libraries

    International Nuclear Information System (INIS)

    Blokhin, A.I.; Ignatyuk, A.V.; Manokhin, V.N.; Nikolaev, M.N.

    1996-01-01

    The status of Russian Evaluated Data Libraries is discussed. The last modifications of the BROND-2 files and their relations to the additional files of the FOND library and the ABBN-90 group constants are considered. The main characteristics of new libraries for the photoneutron data, dosimetry and activation reaction cross sections and transmutation cross sections for intermediate energies are described briefly. (author)

  3. Current status on marine litter indicators in Nordic waters

    DEFF Research Database (Denmark)

    Strand, Jakob; Tairova, Zhanna; Magnusson, Kerstin

    Status for project on Marine litter in the Nordic waters. This includes a review of Nordic studies on marine litter indicators. Various studies as part of either research or existing monitoring have provided information on occurrence of marine litter in Nordic waters from Baltic Sea to the Arctic....

  4. Current status of Uganda Kob (Kobus Kob Thomasi Neumann) in ...

    African Journals Online (AJOL)

    As part of a biological assessment of Toro Game Reserve, the status of Uganda kob Kobus kob Thomasi Newmann, was studied. A survey of traditional mating grounds, foot transects and opportunistic sightings was used to determine population size and structure. The influences of habitat, predation and poaching intensity ...

  5. Current status of the Mallard population in the Nordic countries

    DEFF Research Database (Denmark)

    Dalby, Lars; Söderquist, Pär; Clausen, Preben

    Dabbling ducks (Anas ssp.) are cornerstone species in wetland bird communities and yet in many cases we lack sufficient data to judge the conservation status of the flyway population. In a first step to remedy this we here compile all available data on Mallard in the Nordic countries. We find...

  6. ACRF Instrumentation Status: New, Current, and Future May 2007

    Energy Technology Data Exchange (ETDEWEB)

    JC Liljegren

    2007-04-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

  7. ACRF Instrumentation Status: New, Current, and Future May 2007

    Energy Technology Data Exchange (ETDEWEB)

    JC Liljegren

    2007-05-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

  8. ACRF Instrumentation Status: New, Current, and Future - March 2008

    Energy Technology Data Exchange (ETDEWEB)

    JW Voyles

    2008-04-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

  9. ACRF Instrumentation Status: New, Current, and Future March 2007

    Energy Technology Data Exchange (ETDEWEB)

    JC Liljegren

    2007-03-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

  10. ACRF Instrumentation Status: New, Current, and Future February 2007

    Energy Technology Data Exchange (ETDEWEB)

    JC Liljegren

    2007-02-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development

  11. ACRF Instrumentation Status: New, Current, and Future - February 2008

    Energy Technology Data Exchange (ETDEWEB)

    JW Voyles

    2008-03-01

    The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

  12. Power Line Communication (PLC) in Space - Current Status and Outlook

    Science.gov (United States)

    Wolf, J.

    2012-05-01

    The Power Line Communication (PLC) technology as known from various terrestrial applications, e.g. in building automation, in the automotive sector and on aircraft, appears to be a promising technology for the use on spacecraft. Starting from a critical overview on existing terrestrial PLC applications with their pros and cons, the paper gives a motivation for the introduction of the PLC technology on spacecraft, discusses the potential areas where it can be applied and is highlighting the potential problem areas. A short overview of on-going ESA PLC activities is provided and an outlook is given.

  13. Weight status and body image perceptions in adolescents: current perspectives

    Directory of Open Access Journals (Sweden)

    Voelker DK

    2015-08-01

    Full Text Available Dana K Voelker,1 Justine J Reel,2 Christy Greenleaf3 1West Virginia University, College of Physical Activity and Sport Sciences, Morgantown, WV, 2University of North Carolina Wilmington, College of Health and Human Services, Wilmington, NC, 3University of Wisconsin–Milwaukee, College of Health Sciences, Milwaukee, WI, USA Abstract: Adolescence represents a pivotal stage in the development of positive or negative body image. Many influences exist during the teen years including transitions (eg, puberty that affect one’s body shape, weight status, and appearance. Weight status exists along a spectrum between being obese (ie, where one’s body weight is in the 95th percentile for age and gender to being underweight. Salient influences on body image include the media, which can target adolescents, and peers who help shape beliefs about the perceived body ideal. Internalization of and pressures to conform to these socially prescribed body ideals help to explain associations between weight status and body image. The concepts of fat talk and weight-related bullying during adolescence greatly contribute to an overemphasis on body weight and appearance as well as the development of negative body perceptions and dissatisfaction surrounding specific body parts. This article provides an overview of the significance of adolescent development in shaping body image, the relationship between body image and adolescent weight status, and the consequences of having a negative body image during adolescence (ie, disordered eating, eating disorders, and dysfunctional exercise. Practical implications for promoting a healthy weight status and positive body image among adolescents will be discussed. Keywords: adolescence, eating disorders, obesity, bullying, puberty, physical activity

  14. [Current status and prospects of biobutanol manufacturing technology].

    Science.gov (United States)

    Gu, Yang; Jiang, Yu; Wu, Hui; Liu, Xudong; Li, Zhilin; Li, Jian; Xiao, Han; Shen, Zhaobing; Zhao, Jingbo; Yang, Yunliu; Jiang, Weihong; Yang, Sheng

    2010-07-01

    Butanol is not only an important chemical feedstock but also expected to become a new generation biofuel. Thus, biological butanol production using renewable feedstocks has attracted renewed attention due to the worries of global oil supply and its impact on social and economic development. However, compared with petrochemical-derived butanol, biological butanol production is still not economically competition, because of its major drawbacks: high cost of the feedstocks, low butanol concentration in the fermentation broth and the co-production of low-value byproducts acetone and ethanol. Recently, Shanghai cooperative bio-butanol group (SCBG) developed a simple-to-complex technical route to improve bio-butanol production with a focus on: increasing butanol ratio in the solvent through metabolic engineering of Clostridia spp.; introducing and optimizing the butanol synthetic pathway in the species with high butanol tolerance; overcoming the glucose repression effect to utilize low-cost non-grain based feedstocks. SCBG believes that, through extensive domestic and international industry-university-research cooperation, a sustainable and economically viable process for biological butanol production can be established in the near future.

  15. Indian fast reactor technology: Current status and future programme

    Indian Academy of Sciences (India)

    This apart, oil free bearings (ferro-magnet bearings) are conceived for the future design of pumps to completely eliminate the oil entry issue. 4. Fast reactor programme in India. The targets and strategies of SFR development are illustrated comprehensively in figure 3. FBR programme was started by constructing a loop type ...

  16. Current status and perspectives of genome editing technology for microalgae

    OpenAIRE

    Jeon, Seungjib; Lim, Jong-Min; Lee, Hyung-Gwan; Shin, Sung-Eun; Kang, Nam Kyu; Park, Youn-Il; Oh, Hee-Mock; Jeong, Won-Joong; Jeong, Byeong-ryool; Chang, Yong Keun

    2017-01-01

    Genome editing techniques are critical for manipulating genes not only to investigate their functions in biology but also to improve traits for genetic engineering in biotechnology. Genome editing has been greatly facilitated by engineered nucleases, dubbed molecular scissors, including zinc-finger nuclease (ZFN), TAL effector endonuclease (TALEN) and clustered regularly interspaced palindromic sequences (CRISPR)/Cas9. In particular, CRISPR/Cas9 has revolutionized genome editing fields with i...

  17. Technology Insight: current status of video capsule endoscopy.

    Science.gov (United States)

    Cave, David R

    2006-03-01

    Video capsule endoscopy (VCE) is the most recent major practical and conceptual development in the field of endoscopy. The video capsule endoscope-a small, pill-sized, passive imaging device-has been demonstrated to be the pre-eminent imaging device for disorders of the small intestine. The initial use for VCE was to detect the origin of obscure gastrointestinal bleeding. Several other indications have now been justified, or are in the process of evaluation. More than 200,000 of these disposable devices have been used worldwide, with an extraordinarily good safety record: indeed, the device has been approved for use in children as young as 10 years of age. In addition, a double-ended capsule has now been approved for the evaluation of mucosal disease in the esophagus. The now-widespread deployment of the device into gastrointestinal practice in the US and many other countries suggests that VCE has achieved mainstream utility. The development of similar competitor devices, and devices whose movement can be controlled, is in progress.

  18. CMOS technology and current-feedback op-amps

    DEFF Research Database (Denmark)

    Bruun, Erik

    1993-01-01

    Some of the problems related to the application of CMOS technology to current-feedback operational amplifiers (CFB op-amps) are identified. Problems caused by the low device transconductance and by the absence of matching between p-channel and n-channel transistors are examined, and circuit...

  19. Current data warehousing and OLAP technologies’ status applied to spatial databases

    Directory of Open Access Journals (Sweden)

    Diego Orlando Abril Fradel

    2007-01-01

    Full Text Available Organisations require their information on a timely, dynamic, friendly, centralised and easy-to-access basis for analysing it and taking correct decisions at the right time. Centralisation can be achieved with data warehouse technology. On-line analytical processing (OLAP is used for analysis. Technologies using graphics and maps in data presentation can be exploited for an overall view of a company and helping to take better decisions. Geo- graphic information systems (GIS are useful for spatially locating information and representing it using maps. Data warehouses are generally implemented with a multidimensional data model to make OLAP analysis easier. A fundamental point in this model is the definition of measurements and dimensions; geography lies within such dimensions. Many researchers have concluded that the geographic dimension is another attribute for describing data in current analysis systems but without having an in-depth study of its spatial feature and without locating them on a map, like GIS does. Seen this way, interoperability is necessary between GIS and OLAP (called spatial OLAP or SOLAP and several entities are currently researching this. This document summarises the current status of such research.

  20. Magnetic tomography for fuel cells-current status and problems

    International Nuclear Information System (INIS)

    Hauer, Karl-Heinz; Potthast, Roland

    2007-01-01

    We provide a survey about the status and open problems for magnetic tomography for fuel cells. A number of papers are reviewed which develop the subject including theory of simulation and inversion, uniqueness questions, reconstruction algorithms and real data applications. In particular, this work describes a number of yet unpublished results and experiments. Our goal is to provide a complete picture of the status-quo of magnetic tomography for fuel cells which includes the recent scientific and engineering results as well as an introduction into open questions and upcoming developments. We believe that magnetic tomography as an ill-posed and non-unique inverse source problem reflects key problems of many applied inverse problems. In particular, the challenges of real data applications reflect the challenges of the area of inverse problems as a whole and provide inside into generic problems of this important area of applied mathematics